WorldWideScience

Sample records for crystal packing exhibits

  1. Crystal packing effects on protein loops.

    Science.gov (United States)

    Rapp, Chaya S; Pollack, Rena M

    2005-07-01

    The effects of crystal packing on protein loop structures are examined by (1) a comparison of loops in proteins that have been crystallized in alternate packing arrangements, and (2) theoretical prediction of loops both with and without the inclusion of the crystal environment. Results show that in a minority of cases, loop geometries are dependent on crystal packing effects. Explicit representation of the crystal environment in a loop prediction algorithm can be used to model these effects and to reconstruct the structures, and relative energies, of a loop in alternative packing environments. By comparing prediction results with and without the inclusion of the crystal environment, the loop prediction algorithm can further be used to identify cases in which a crystal structure does not represent the most stable state of a loop in solution. We anticipate that this capability has implications for structural biology.

  2. An effective packing density of binary cubic crystals

    Science.gov (United States)

    Eremin, I. E.; Eremina, V. V.; Sychev, M. S.; Moiseenko, V. G.

    2015-04-01

    The methodology of effective macroscopic calculation of numerical values of internuclear distances in binary crystals of a cubic crystal system is based on the use of coefficients of the structural packing density of the crystal lattice. The possibility of combining the reference data on the main physicochemical parameters of the substance is implemented by synthesis of the corresponding mathematical models.

  3. Solution Coating of Superior Large-Area Flexible Perovskite Thin Films with Controlled Crystal Packing

    KAUST Repository

    Li, Jianbo

    2017-05-08

    Solution coating of organohalide lead perovskites offers great potential for achieving low-cost manufacturing of large-area flexible optoelectronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of crystal packing. Herein, this study reports using solution shearing to confine crystal nucleation and growth in large-area printed MAPbI3 thin films. Near single-crystalline perovskite microarrays are demonstrated with a high degree of controlled macroscopic alignment and crystal orientation, which exhibit significant improvements in optical and optoelectronic properties comparing with their random counterparts, spherulitic, and nanograined films. In particular, photodetectors based on the confined films showing intense anisotropy in charge transport are fabricated, and the device exhibits significantly improved performance in all aspects by one more orders of magnitude relative to their random counterparts. It is anticipated that perovskite films with controlled crystal packing may find applications in high-performance, large-area printed optoelectronics, and solar cells.

  4. Crystal packing in two pH-dependent crystal forms of rhamnogalacturonan acetylesterase

    DEFF Research Database (Denmark)

    Mølgaard, Anne; Larsen, S.

    2004-01-01

    The glycoprotein rhamnogalacturonan acetylesterase from Aspergillus aculeatus has been crystallized in two crystal forms, an orthorhombic and a trigonal crystal form. In the orthorhombic crystal form, the covalently bound carbohydrate at one of the two N-glycosylation sites is involved in crystal...... contacts. The orthorhombic crystal form was obtained at pH 5.0 and the trigonal crystal form at pH 4.5. In one case, the two crystal forms were found in the same drop at pH 4.7. The differences in crystal packing in the two crystal forms can be explained by the pH-dependent variation in the protonation...

  5. Atom interaction propensities of oxygenated chemical functions in crystal packings

    Directory of Open Access Journals (Sweden)

    Christian Jelsch

    2017-03-01

    Full Text Available The crystal contacts of several families of hydrocarbon compounds substituted with one or several types of oxygenated chemical groups were analyzed statistically using the Hirshfeld surface methodology. The propensity of contacts to occur between two chemical types is described with the contact enrichment descriptor. The systematic large enrichment ratios of some interactions like the O—H...O hydrogen bonds suggests that these contacts are a driving force in the crystal packing formation. The same statement holds for the weaker C—H...O hydrogen bonds in ethers, esters and ketones, in the absence of polar H atoms. The over-represented contacts in crystals of oxygenated hydrocarbons are generally of two types: electrostatic attractions (hydrogen bonds and hydrophobic interactions. While Cl...O interactions are generally avoided, in a minority of chloro-oxygenated hydrocarbons, significant halogen bonding does occur. General tendencies can often be derived for many contact types, but outlier compounds are instructive as they display peculiar or rare features. The methodology also allows the detection of outliers which can be structures with errors. For instance, a significant number of hydroxylated molecules displaying over-represented non-favorable oxygen–oxygen contacts turned out to have wrongly oriented hydroxyl groups. Beyond crystal packings with a single molecule in the asymmetric unit, the behavior of water in monohydrate compounds and of crystals with Z′ = 2 (dimers are also investigated. It was found in several cases that, in the presence of several oxygenated chemical groups, cross-interactions between different chemical groups (e.g. water/alcohols; alcohols/phenols are often favored in the crystal packings. While some trends in accordance with common chemical principles are retrieved, some unexpected results can however appear. For example, in crystals of alcohol–phenol compounds, the strong O—H...O hydrogen bonds between

  6. Effect of crystal packing on the structures of polymeric metallocenes.

    Science.gov (United States)

    Dinnebier, R E; van Smaalen, Sander; Olbrich, F; Carlson, S

    2005-02-21

    The pressure dependencies of the crystal structures of the polymeric metallocenes lithium cyclopentadienide (LiCp) and potassium cyclopentadienide (KCp) have been determined by synchrotron X-ray powder diffraction. The decrease of the volume of LiCp by 34% up to a pressure of p = 12.2 GPa and of KCp by 23% at p = 5.3 GPa as well as the bulk moduli of K = 7.7 GPa for LiCp and 4.9 GPa for KCp indicate a high compressibility for these compounds. The crystal structures of KCp have been determined up to p = 3.9 GPa. An increase of the bend angle is found from 45 degrees at p = 0 GPa up to 51 degrees at p = 3.9 GPa. This variation is completely explained by a model invoking attractive K+ Cp- interaction and repulsive nonbonded carbon-carbon interactions. It is proposed that the bend angle in the polymeric alkali metal metallocenes is the result of the optimization of the crystal packing.

  7. Temperature-mediated polymorphism in molecular crystals: The impact on crystal packing and charge transport

    KAUST Repository

    Stevens, Loah A.

    2015-01-13

    We report a novel synthesis to ultra high purity 7,14-bis((trimethylsilyl)ethynyl)dibenzo[b,def]-chrysene (TMS-DBC) and the use of this material in the growth of single crystals by solution and vapor deposition techniques. We observe that the substrate temperature has a dramatic impact on the crystal growth, producing two distinct polymorphs of TMS-DBC; low temperature (LT) fine red needles and high temperature (HT) large yellow platelets. Single crystal X-ray crystallography confirms packing structures where the LT crystals form a 1D slipped-stack structure, while the HT crystals adopt a 2D brickwork motif. These polymorphs also represent a rare example where both are extremely stable and do not interconvert to the other crystal structure upon solvent or thermal annealing. Single crystal organic field-effect transistors of the LT and HT crystals show that the HT 2D brickwork motif produces hole mobilities as high as 2.1 cm2 V-1 s-1, while the mobility of the 1D structure is significantly lower, at 0.028 cm2 V-1 s-1. Electronic-structure calculations indicate that the superior charge transport in the brickwork polymorph in comparison to the slipped-stack polymorph is due to the presence of an increased dimensionality of the charge migration pathways.

  8. On plastic flow in notched hexagonal close packed single crystals

    Science.gov (United States)

    Selvarajou, Balaji; Kondori, Babak; Benzerga, A. Amine; Joshi, Shailendra P.

    2016-09-01

    The micromechanics of anisotropic plastic flow by combined slip and twinning is investigated computationally in single crystal notched specimens. Constitutive relations for hexagonal close packed materials are used which take into account elastic anisotropy, thirty potential deformation systems, various hardening mechanisms and rate-sensitivity. The specimens are loaded perpendicular to the c-axis but the presence of a notch generates three-dimensional triaxial stress states. The study is motivated by recent experiments on a polycrystalline magnesium alloy. To enable comparisons with these where appropriate, three sets of activation thresholds for the various deformation systems are used. For the conditions that most closely mimic the alloy material, attention is focused on the relative roles of pyramidal and prismatic slip, as well as on the emergence of {1012bar}[101bar1] extension twinning at sufficiently high triaxiality. In all cases, the spatial variations of stress triaxiality and plastic strain, inclusive of various system activities, are quantified along with their evolution upon straining. The implications of these findings in fundamental understanding of ductile failure of HCP alloys in general and Mg alloys in particular are discussed.

  9. Packing interface energetics in different crystal forms of the λ Cro dimer.

    Science.gov (United States)

    Ahlstrom, Logan S; Miyashita, Osamu

    2014-07-01

    Variation among crystal structures of the λ Cro dimer highlights conformational flexibility. The structures range from a wild type closed to a mutant fully open conformation, but it is unclear if each represents a stable solution state or if one may be the result of crystal packing. Here we use molecular dynamics (MD) simulation to investigate the energetics of crystal packing interfaces and the influence of site-directed mutagenesis on them in order to examine the effect of crystal packing on wild type and mutant Cro dimer conformation. Replica exchange MD of mutant Cro in solution shows that the observed conformational differences between the wild type and mutant protein are not the direct consequence of mutation. Instead, simulation of Cro in different crystal environments reveals that mutation affects the stability of crystal forms. Molecular Mechanics Poisson-Boltzmann Surface Area binding energy calculations reveal the detailed energetics of packing interfaces. Packing interfaces can have diverse properties in strength, energetic components, and some are stronger than the biological dimer interface. Further analysis shows that mutation can strengthen packing interfaces by as much as ∼5 kcal/mol in either crystal environment. Thus, in the case of Cro, mutation provides an additional energetic contribution during crystal formation that may stabilize a fully open higher energy state. Moreover, the effect of mutation in the lattice can extend to packing interfaces not involving mutation sites. Our results provide insight into possible models for the effect of crystallization on Cro conformational dynamics and emphasize careful consideration of protein crystal structures.

  10. Can Crystal Symmetry and Packing Influence the Active Site Conformation of Homohexameric Purine Nucleoside Phosphorylases?

    Directory of Open Access Journals (Sweden)

    Marija Luić

    2016-06-01

    Full Text Available It is generaly believed that enzymes retain most of their functionality in the crystal form due to the large solvent content of protein crystals. This is facilitated by the fact that their natural environment in solution is not too far from the one found in the crystal form. Nevertheless, if the nature of the enzyme is such to require conformational changes, overcoming of the crystal packing constraints may prove to be too difficult. Such conformational change is present in one class of enzymes (purine nucleoside phosphorylases, that is the subject of our scientific interest for many years. The influence of crystal symmetry and crystal packing on the conformation of the active sites in the case of homohexameric purine nucleoside phosphorylases is presented and analysed. This work is licensed under a Creative Commons Attribution 4.0 International License.

  11. Substituent effect on the thermodynamic solubility of structural analogs: relative contribution of crystal packing and hydration.

    Science.gov (United States)

    Ozaki, Shunsuke; Nakagawa, Yoshiaki; Shirai, Osamu; Kano, Kenji

    2014-11-01

    Thermodynamic analysis of the solubility of benzoylphenylurea (BPU) derivatives was conducted to investigate the relative importance of crystal packing and hydration for improving solubility with minor structural modification. The contribution of crystal packing to solubility was evaluated from the change in Gibbs energy on the transition from the crystalline to liquid state. Hydration Gibbs energy was estimated using a linear free-energy relationship between octanol-water partition coefficients and gas-water partition coefficients. The established solubility model satisfactorily explained the relative thermodynamic solubility of the model compounds and revealed that crystal packing and hydration equally controlled solubility of the structural analogs. All hydrophobic substituents were undesirable for solubility in terms of hydration, as expected. On the other hand, some of these hydrophobic substituents destabilized crystal packing and improved the solubility of the BPU derivatives when their impact on crystal packing exceeded their negative influence on hydration. The replacement of a single substituent could cause more than a 10-fold enhancement in thermodynamic solubility; this degree of improvement was comparable to that generally achieved by amorphous formulations. Detailed analysis of thermodynamic solubility will allow us to better understand the true substituent effect and design drug-like candidates efficiently.

  12. Computation of acoustic absorption in media composed of packed microtubes exhibiting surface irregularity.

    Science.gov (United States)

    Kulpe, Jason A; Lee, Chang-Yong; Leamy, Michael J

    2011-08-01

    A multi-scale homogenization technique and a finite element-based solution procedure are employed to compute acoustic absorption in smooth and rough packed microtubes. The absorption considered arises from thermo-viscous interactions between the fluid media and the microtube walls. The homogenization technique requires geometric periodicity, which for smooth tubes is invoked using the periodicity of the finite element mesh; for rough microtubes, the periodicity invoked is that associated with the roughness. Analysis of the packed configurations, for the specific microtube radii considered, demonstrates that surface roughness does not appreciably increase the overall absorption, but instead shifts the peaks and values of the absorption curve. Additionally, the effect of the fluid media temperature on acoustic absorption is also explored. The results of the investigation are used to make conclusions about tailored design of acoustically absorbing microtube-based materials.

  13. Low-density crystal packing of human protein kinase CK2 catalytic subunit in complex with resorufin or other ligands

    DEFF Research Database (Denmark)

    Klopffleisch, Karsten; Issinger, Olaf Georg; Niefind, Karsten

    2012-01-01

    adopts a closed conformation correlating to a canonically established catalytic spine as is typical for eukaryotic protein kinases. In the corresponding crystal packing the hinge/helix αD region is nearly unaffected by crystal contacts, so that largely unbiased conformational adaptions are possible....... This is documented by published human CK2α structures with the same crystal packing but with an open hinge/helix αD region, one of which has been redetermined here with a higher symmetry. An overview of all published human CK2α crystal packings serves as the basis for a discussion of the factors that determine...

  14. Crystals from China Exhibition Science Bringing Nations Together

    CERN Multimedia

    2000-01-01

    L3 aimed to specialize in measuring electrons, positrons, and photons emerging at small angles to LEP's colliding beams with the best possible precision. To achieve this, special crystals made from Bismuth Germanate, BGO, were chosen. Such crystals had previously only been made in small quantities, a few cubic centimetres, and never with the purity required by L3. The experiment would need a massive 12 tons of BGO crystals.

  15. Hydrogen Bonding: Between Strengthening the Crystal Packing and Improving Solubility of Three Haloperidol Derivatives

    Directory of Open Access Journals (Sweden)

    Hardeep Saluja

    2016-06-01

    Full Text Available The purpose of this study is to confirm the impact of polar functional groups on inter and intra-molecular hydrogen bonding in haloperidol (HP and droperidol (DP and, hence, their effects on dissolution using a new approach. To confirm our theory, a new molecule: deshydroxy-haloperidol (DHP was designed and its synthesis was requested from a contract laboratory. The molecule was then studied and compared to DP and HP. Unlike DHP, both the HP and DP molecules have hydrogen donor groups, therefore, DHP was used to confirm the relative effects of the hydrogen donor group on solubility and crystal packing. The solid dispersions of the three structurally related molecules: HP, DP, and DHP were prepared using PVPK30, and characterized using XRPD and IR. A comparative dissolution study was carried out in aqueous medium. The absence of a hydrogen bonding donor group in DHP resulted in an unexpected increase in its aqueous solubility and dissolution rate from solid dispersion, which is attributed to weaker crystal pack. The increased dissolution rate of HP and DP from solid dispersions is attributed to drug-polymer hydrogen bonding that interferes with the drug-drug intermolecular hydrogen bonding and provides thermodynamic stability of the dispersed drug molecules. The drug-drug intermolecular hydrogen bond is the driving force for precipitation and crystal packing.

  16. Exhibition

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    China[Guangzheu] International Trade Fair for Home Textiles Date:March 18th- March 21st,2011 Venue:China Import and Export Fair Complex(Guangzhou,China) Organizers:China National Textile&Apparel Council China Foreign Trade Center(Group) China Home Textile Association China Foreign Trade Guangzhou Exhibition Corp.

  17. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    A Look of Hope Islam Mahmoud Sweity From 19 to 30 June 2017 CERN Meyrin, Main Building Islam Mahmoud Sweity Islam Mahmoud Sweity was born in 1997 at Beit Awwa, Palestine. She is currently following a course to get an Art diploma of Painting at the college of Fine Arts at An-Najah National University under the supervision of Esmat Al As'aad. Her portraits, landscapes and still life paintings are full of life and shining colours. Charged of emotional empathy they catch the attention of the viewer and are reminding us that life is beautiful and worth living in spite of all difficulties we have to go through. She participated in many exhibitions and has exposed her drawings in 2015 at CERN and in France in the framework of the exhibition "The Origin“, and in 2017 in the Former Yugoslav Republic of Macedonia, Palestina and Jordan. In this exhibition the oil paintings made in the past year will be presented. For more information : staff.association@cern.ch | T&eacu...

  18. Effect of packing motifs on the energy ranking and electronic properties of putative crystal structures of tricyano-1,4-dithiino[c]-isothiazole.

    Science.gov (United States)

    Curtis, Farren; Wang, Xiaopeng; Marom, Noa

    2016-08-01

    We present an analysis of putative structures of tricyano-1,4-dithiino[c]-isothiazole (TCS3), generated within the sixth crystal structure prediction blind test. Typical packing motifs are identified and characterized in terms of distinct patterns of close contacts and regions of electrostatic and dispersion interactions. We find that different dispersion-inclusive density functional theory (DFT) methods systematically favor specific packing motifs, which may affect the outcome of crystal structure prediction efforts. The effect of crystal packing on the electronic and optical properties of TCS3 is investigated using many-body perturbation theory within the GW approximation and the Bethe-Salpeter equation (BSE). We find that a structure with Pna21 symmetry and a bilayer packing motif exhibits intermolecular bonding patterns reminiscent of π-π stacking and has markedly different electronic and optical properties than the experimentally observed P21/n structure with a cyclic dimer motif, including a narrower band gap, enhanced band dispersion and broader optical absorption. The Pna21 bilayer structure is close in energy to the observed structure and may be feasible to grow.

  19. Packing schemes of cavities in selected clathrasils and zeolites and the analogous packings of atoms in crystal structures

    DEFF Research Database (Denmark)

    Hem, Caroline Piper; Makovicky, Emil; Balic Zunic, Tonci

    2010-01-01

    Sizes of cavities and their packing schemes in selected zeolites and clathrasils were studied by means of least squares fitting of circumscribed spheres to them. Resulting packing of spheres of different diameters was analyzed by the coordinates of their centers, their volumes and sphericity...

  20. Packing schemes of cavities in selected clathrasils and zeolites and the analogous packings of atoms in crystal structures

    DEFF Research Database (Denmark)

    Hem, Caroline Piper; Makovicky, Emil; Balic Zunic, Tonci

    2010-01-01

    Sizes of cavities and their packing schemes in selected zeolites and clathrasils were studied by means of least squares fitting of circumscribed spheres to them. Resulting packing of spheres of different diameters was analyzed by the coordinates of their centers, their volumes and sphericity, and...

  1. Exhibition

    CERN Multimedia

    Staff Association

    2016-01-01

    Encounters Hanne Blitz From February 1st to 12th 2016 CERN Meyrin, Main Building What is our reaction to a first encounter with a tourist attraction? Contemporary Dutch painter Hanne Blitz captures visitors' responses to art and architecture, sweeping vistas and symbolic memorials. Encounters, a series of oil paintings curated specially for this CERN exhibition, depicts tourists visiting cultural highlights around the world. A thought-provoking journey not to be missed, and a tip of the hat to CERN's large Hadron Collider.

  2. Close-packed polymer crystals from two-monomer-connected precursors

    Science.gov (United States)

    Lee, Hong-Joon; Jo, Yong-Ryun; Kumar, Santosh; Yoo, Seung Jo; Kim, Jin-Gyu; Kim, Youn-Joong; Kim, Bong-Joong; Lee, Jae-Suk

    2016-09-01

    The design of crystalline polymers is intellectually stimulating and synthetically challenging, especially when the polymerization of any monomer occurs in a linear dimension. Such linear growth often leads to entropically driven chain entanglements and thus is detrimental to attempts to realize the full potential of conjugated molecular structures. Here we report the polymerization of two-monomer-connected precursors (TMCPs) in which two pyrrole units are linked through a connector, yielding highly crystalline polymers. The simultaneous growth of the TMCP results in a close-packed crystal in polypyrrole (PPy) at the molecular scale with either a hexagonal close-packed or face-centred cubic structure, as confirmed by high-voltage electron microscopy, and the structure that formed could be controlled by simply changing the connector. The electrical conductivity of the TMCP-based PPy is almost 35 times that of single-monomer-based PPy, demonstrating its promise for application in diverse fields.

  3. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    Sintropie Flavio Pellegrini From 13 to 24 March 2017 CERN Meyrin, Main Building Energia imprigionata - Flavio Pellegrini. The exhibition is composed by eleven wood artworks with the expression of movement as theme. The artworks are the result of harmonics math applied to sculpture. The powerful black colour is dominated by the light source, generating reflexes and modulations. The result is a continuous variation of perspective visions. The works generate, at a first approach, an emotion of mystery and incomprehension, only a deeper contemplation lets one discover entangling and mutative details, evidencing the elegance of the lines and letting the meaning emerge. For more information : staff.association@cern.ch | Tél: 022 766 37 38

  4. Interrelation between crystal packing and small-molecule organic solar cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Fitzner, Roland; Reinold, Egon; Mena-Osteritz, Elena; Baeuerle, Peter [Institut fuer Organische Chemie II und Neue Materialien, Universitaet Ulm (Germany); Elschner, Chris; Koerner, Christian; Riede, Moritz; Leo, Karl [Institut fuer Angewandte Photophysik, TU Dresden (Germany); Weil, Matthias [Institut fuer Chemische Technologien und Analytik, Abteilung Strukturchemie, TU Wien, Vienna (Austria); Uhrich, Christian; Pfeiffer, Martin [Heliatek GmbH, Dresden (Germany)

    2012-02-02

    X-ray investigations on single crystals of a series of terminally dicyanovinyl-substituted quaterthiophenes and co-evaporated blend layers with C{sub 60} give insight into molecular packing behavior and morphology, which are crucial parameters in the field of organic electronics. Structural characteristics on various levels and length scales are correlated with the photovoltaic performance of bulk heterojunction small-molecule organic solar cells. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  5. Probing crystal packing of uniformly (13)C-enriched powder samples using homonuclear dipolar coupling measurements.

    Science.gov (United States)

    Mollica, Giulia; Dekhil, Myriam; Ziarelli, Fabio; Thureau, Pierre; Viel, Stéphane

    2015-02-01

    The relationship between the crystal packing of powder samples and long-range (13)C-(13)C homonuclear dipolar couplings is presented and illustrated for the case of uniformly (13)C-enriched L-alanine and L-histidine·HCl·H2O. Dipolar coupling measurement is based on the partial reintroduction of dipolar interactions by spinning the sample slightly off-magic-angle, while the coupling of interest for a given spin pair is isolated with a frequency-selective pulse. A cost function is used to correlate the so-derived dipolar couplings to trial crystal structures of the samples under study. This procedure allowed for the investigation of the l-alanine space group and L-histidine·HCl·H2O space group and unit-cell parameters.

  6. Absolute configuration and crystal packing for three chiral drugs prone to spontaneous resolution: Guaifenesin, methocarbamol and mephenesin

    Science.gov (United States)

    Bredikhin, Alexander A.; Gubaidullin, Aidar T.; Bredikhina, Zemfira A.; Krivolapov, Dmitry B.; Pashagin, Alexander V.; Litvinov, Igor A.

    2009-02-01

    Popular chiral drugs, guaifenesin, methocarbamol, and mephenesin were investigated by single-crystal X-ray analysis both for enantiopure and racemic samples. The absolute configurations for all substances were established through Flack parameter method. The conglomerate-forming nature for the compounds was confirmed by equivalence of crystal characteristics of enantiopure and racemic samples. The molecular structures and crystal packing details were evaluated and compared with one another for all three investigated substances.

  7. Crystal Clear - New crystals for LHC experiments help to improve PET scanners Exhibition LEPFest 2000

    CERN Multimedia

    2000-01-01

    Better resolution through smaller crystals Better images through higher light yieldHigh efficiency, stability and gain by using avalanche photodiodes and low noise electronics Reduced cost of crystals (1/10) through mass production

  8. Effect of the packing structure of silicon chunks on the melting process and carbon reduction in Czochralski silicon crystal growth

    Science.gov (United States)

    Liu, Xin; Nakano, Satoshi; Kakimoto, Koichi

    2017-06-01

    Carbon (C) contamination in Czochralski silicon (CZ-Si) crystal growth mainly originates from carbon monoxide (CO) generation on the graphite components, which reaches a maximum during the melting stage. Loading a crucible with poly-Si feedstock includes many technical details for optimization of the melting and growth processes. To investigate the effect of the packing structure of Si chunks on C accumulation in CZ-Si crystal growth, transient global simulations of heat and mass transport were performed for the melting process with different packing structures of poly-Si. The heat transport modeling took into account the effective thermal conductivity (ETC) of the Si feedstock, which is affected by the packing structure. The effect of the chunk size on the melting process and C accumulation were investigated by parametric studies of different packing structures. The heat transport and melting process in the crucible were affected by the ETC and the emissivity of the Si feedstock. It was found that smaller Si chunks packed in the upper part could speed up the melting process and smooth the power profile. Decreasing the duration of the melting process is favorable for reduction of C contamination in the Si feedstock. Parametric studies indicated that optimization of the melting process by the packing structure is possible and essential for C reduction in CZ-Si crystal growth.

  9. Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Science.gov (United States)

    Ludwig, A.; Vakhrushev, A.; Holzmann, T.; Wu, M.; Kharicha, A.

    2015-06-01

    During many industrial solidification processes equiaxed crystals form, grow and move. When those crystals are small they are carried by the melt, whereas when getting larger they sediment. As long as the volume fraction of crystals is below the packing limit, they are able to move relatively free. Crystals being backed in a so called packed bed form a semi-solid slurry, which may behave like a visco-plastic material. In addition, cooling-induced density increase of both, liquid and solid phases might lead to shrinkage of the whole casting domain. So deformation happens and gaps between casting and mold occur. In the present work, a two-phase Eulerian-Eulerian volume averaging model for describing the motion of equiaxed crystals in the melt is combined with a similar two-phase model for describing the dynamic of the packed bed. As constitutive equation for the solid skeleton in the packed bed Norton-Hoff law is applied. Shrinkage induced by density changes in the liquid or the solid phase is explicitly taken into account and handled by remeshing the calculation domain accordantly.

  10. Organic Semiconductor-Containing Supramolecules: Effect of Small Molecule Crystallization and Molecular Packing

    KAUST Repository

    Rancatore, Benjamin J.

    2016-01-21

    © 2016 American Chemical Society. Small molecules (SMs) with unique optical or electronic properties provide an opportunity to incorporate functionality into block copolymer (BCP)-based supramolecules. However, the assembly of supramolecules based on these highly crystalline molecules differs from their less crystalline counterparts. Here, two families of organic semiconductor SMs are investigated, where the composition of the crystalline core, the location (side- vs end-functionalization) of the alkyl solubilizing groups, and the constitution (branched vs linear) of the alkyl groups are varied. With these SMs, we present a systematic study of how the phase behavior of the SMs affects the overall assembly of these organic semiconductor-based supramolecules. The incorporation of SMs has a large effect on the interfacial curvature, the supramolecular periodicity, and the overall supramolecular morphology. The crystal packing of the SM within the supramolecule does not necessarily lead to the assembly of the comb block within the BCP microdomains, as is normally observed for alkyl-containing supramolecules. An unusual lamellar morphology with a wavy interface between the microdomains is observed due to changes in the packing structure of the small molecule within BCP microdomains. Since the supramolecular approach is modular and small molecules can be readily switched out, present studies provide useful guidance toward access supramolecular assemblies over several length scales using optically active and semiconducting small molecules.

  11. Modulating two-dimensional non-close-packed colloidal crystal arrays by deformable soft lithography.

    Science.gov (United States)

    Li, Xiao; Wang, Tieqiang; Zhang, Junhu; Yan, Xin; Zhang, Xuemin; Zhu, Difu; Li, Wei; Zhang, Xun; Yang, Bai

    2010-02-16

    We report a simple method to fabricate two-dimensional (2D) periodic non-close-packed (ncp) arrays of colloidal microspheres with controllable lattice spacing, lattice structure, and pattern arrangement. This method combines soft lithography technique with controlled deformation of polydimethylsiloxane (PDMS) elastomer to convert 2D hexagonal close-packed (hcp) silica microsphere arrays into ncp ones. Self-assembled 2D hcp microsphere arrays were transferred onto the surface of PDMS stamps using the lift-up technique, and then their lattice spacing and lattice structure could be adjusted by solvent swelling or mechanical stretching of the PDMS stamps. Followed by a modified microcontact printing (microcp) technique, the as-prepared 2D ncp microsphere arrays were transferred onto a flat substrate coated with a thin film of poly(vinyl alcohol) (PVA). After removing the PVA film by calcination, the ncp arrays that fell on the substrate without being disturbed could be lifted up, deformed, and transferred again by another PDMS stamp; therefore, the lattice feature could be changed step by step. Combining isotropic solvent swelling and anisotropic mechanical stretching, it is possible to change hcp colloidal arrays into full dimensional ncp ones in all five 2D Bravais lattices. This deformable soft lithography-based lift-up process can also generate patterned ncp arrays of colloidal crystals, including one-dimensional (1D) microsphere arrays with designed structures. This method affords opportunities and spaces for fabrication of novel and complex structures of 1D and 2D ncp colloidal crystal arrays, and these as-prepared structures can be used as molds for colloidal lithography or prototype models for optical materials.

  12. Real-Time Packing Behavior of Core-Shell Silica@Poly(N-isopropylacrylamide Microspheres as Photonic Crystals for Visualizing in Thermal Sensing

    Directory of Open Access Journals (Sweden)

    Karthikeyan Manivannan

    2016-12-01

    Full Text Available We grafted thermo-responsive poly(N-isopropylacrylamide (PNIPAM brushes from monodisperse SiO2 microspheres through surface-initiated atom transfer radical polymerization (SI ATRP to generate core-shell structured SiO2@PNIPAM microspheres (SPMs. Regular-sized SPMs dispersed in aqueous solution and packed as photonic crystals (PCs in dry state. Because of the microscale of the SPMs, the packing behavior of the PCs in water can be observed by optical microscopy. By increasing the temperature above the lower critical solution temperature (LCST of PNIPAM, the reversible swelling and shrinking of the PNIPAM shell resulted in dispersion and precipitation (three-dimensional aggregation of the SPM in aqueous solution. The SPMs were microdispersed in a water layer to accommodate the aggregation along two dimensions. In the microdispersion, the SPMs are packed as PCs with microscale spacing between SPMs below the LCST. When the temperature is increased above the LCST, the microdispersed PCs exhibited a close-packed arrangement along two dimensions with decreased spacing between SPMs. The change in spacing with increasing temperature above the LCST resulted in a color change from red to blue, which could be observed by the naked eye at an incident angle. Thus, the SPM array could be applied as a visual temperature sensor.

  13. Double hexagonal close-packed structure revealed in a single colloidal crystal grain by Bragg rod analysis

    NARCIS (Netherlands)

    Meijer, J. M.; Shabalin, A.; Dronyak, R.; Yefanov, O. M.; Singer, A.; Kurta, R. P.; Lorenz, U.; Gorobstov, O.; Dzhigaev, D.; Gulden, J.; Byelov, D. V.; Zozulya, A. V.; Sprung, M.; Vartanyants, I. A.; Petukhov, Andrei V.

    2014-01-01

    A coherent X-ray diffraction study of a single colloidal crystal grain composed of silica spheres is reported. The diffraction data contain Bragg peaks and additional features in the form of Bragg rods, which are related to the stacking of the hexagonally close-packed layers. The profile of the Brag

  14. The fourth crystallographic closest packing unveiled in the gold nanocluster crystal

    Science.gov (United States)

    Gan, Zibao; Chen, Jishi; Wang, Juan; Wang, Chengming; Li, Man-Bo; Yao, Chuanhao; Zhuang, Shengli; Xu, An; Li, Lingling; Wu, Zhikun

    2017-03-01

    Metal nanoclusters have recently attracted extensive interest not only for fundamental scientific research, but also for practical applications. For fundamental scientific research, it is of major importance to explore the internal structure and crystallographic arrangement. Herein, we synthesize a gold nanocluster whose composition is determined to be Au60S6(SCH2Ph)36 by using electrospray ionization mass spectrometry and single crystal X-ray crystallography (SCXC). SCXC also reveals that Au60S6(SCH2Ph)36 consists of a fcc-like Au20 kernel protected by a pair of giant Au20S3(SCH2Ph)18 staple motifs, which contain 6 tetrahedral-coordinate μ4-S atoms not previously reported in the Au-S interface. Importantly, the fourth crystallographic closest-packed pattern, termed 6H left-handed helical (6HLH) arrangement, which results in the distinct loss of solid photoluminescence of amorphous Au60S6(SCH2Ph)36, is found in the crystals of Au60S6(SCH2Ph)36. The solvent-polarity-dependent solution photoluminescence is also demonstrated. Overall, this work provides important insights about the structure, Au-S bonding and solid photoluminescence of gold nanoclusters.

  15. Polymorphism in two biologically active dihydropyrimidinium hydrochloride derivatives: quantitative inputs towards the energetics associated with crystal packing.

    Science.gov (United States)

    Panini, Piyush; Venugopala, K N; Odhav, Bharti; Chopra, Deepak

    2014-08-01

    A new polymorph belonging to the tetrahydropyrimidinium class of compounds, namely 6-(4-chlorophenyl)-5-(methoxycarbonyl)-4-methyl-2-(3-(trifluoromethylthio)phenylamino)-3,6-dihydropyrimidin-1-ium chloride, and a hydrate of 2-(3-bromophenylamino)-6-(4-chlorophenyl)-5-(methoxycarbonyl)-4-methyl-3,6-dihydropyrimidin-1-ium chloride, have been isolated and characterized using single-crystal X-ray diffraction (XRD). A detailed comprehensive analysis of the crystal packing in terms of the associated intermolecular interactions and a quantification of their interaction energies have been performed for both forms of the two different organic salts (A and B) using X-ray crystallography and computational methods such as density functional theory (DFT) quantum mechanical calculations, PIXEL lattice-energy calculations (with decomposition of total lattice energy into the Coulombic, polarization, dispersion and repulsion contribution), the calculation of the Madelung constant (the EUGEN method), Hirshfeld and two-dimensional fingerprint plots. The presence of ionic [N-H](+)···Cl(-) and [C-H](+)···Cl(-) hydrogen bonds mainly stabilizes the crystal packing in both forms A and B, while in the case of B·H2O [N-H](+)···O(water) and O(water)-H···Cl(-) hydrogen bonds along with [N-H](+)···Cl(-) and [C-H](+)···Cl(-) provide stability to the crystal packing. The lattice-energy calculations from both PIXEL and EUGEN methods revealed that in the case of A, form (I) (monoclinic) is more stable whereas for B it is the anhydrous form that is more stable. The analysis of the `Madelung mode' of crystal packing of two forms of A and B and its hydrates suggest that differences exist in the position of the charged ions/atoms in the organic solid state. The R/E (distance-energy) plots for all the crystal structures show that the molecular pairs in their crystal packing are connected with either highly stabilizing (due to the presence of organic R(+) and Cl(-)) or highly

  16. Fabrication of size-controllable hexagonal non-close-packed colloidal crystals and binary colloidal crystals by pyrolysis combined with plasma-electron coirradiation of polystyrene colloidal monolayer.

    Science.gov (United States)

    Kim, Jae Joon; Li, Yue; Lee, Eun Je; Cho, Sung Oh

    2011-03-15

    We present an unprecedented and systematic route to controllably fabricate hexagonal non-close-packed (hncp) monolayer colloidal crystals and binary colloidal crystals (BCCs) based on plasma-electron coirradiation of polystyrene colloidal monolayers followed by thermal decomposition. Hncp colloidal crystals with tunable particle sizes and periods could be fabricated by changing the pristine colloidal particle size and the thermal decomposition time. In addition, BCCs and trimodal colloidal crystals that are composed of different-sized colloidal particles can also be fabricated by adding small particles on the prepared hncp colloidal crystals. Both the particle size ratio and the volume fraction of the BCCs can be widely tuned. These hncp colloidal crystals and BCCs have various potential applications as optical and photonic materials as well as in catalysis and sensors.

  17. Understanding Packing Patterns in Crystals by Analysis of Small Aggregates: A Case Study of CS2.

    Science.gov (United States)

    Singh, Gurmeet; Verma, Rahul; Gadre, Shridhar R

    2015-12-31

    The molecular electrostatic potential (MESP) of the CS2 molecule, in conjunction with the cluster building algorithm, is utilized for generating trial geometries of medium-sized (CS2)n (n = 5-8) aggregates. MESP features suggest crossed, parallel stacked, T-shaped and L-shaped geometries for CS2 clusters. These initial geometries are subjected to geometry optimization employing second-order Møller-Plesset (MP2) theory, with correlation consistent aug-cc-pvDZ (aDZ) basis set. Single-point energies at MP2/aTZ levels are calculated for the estimation of binding energies at complete basis set (CBS) limit. The minimal nature of the reported structures is confirmed by doing vibrational frequency run at MP2/aDZ level of theory using the molecular tailoring approach (MTA). The two- and three-body interaction energies are computed for clusters with n = 5, 6, and 7 and these are suggestive of change in contact patterns with increasing n. Such an analysis is found to offer a qualitative explanation of the packing pattern found in the crystal structure.

  18. A novel opal closest-packing photonic crystal for naked-eye glucose detection.

    Science.gov (United States)

    Hong, Xiaodi; Peng, Yuan; Bai, Jialei; Ning, Baoan; Liu, Yuanyuan; Zhou, Zhijiang; Gao, Zhixian

    2014-04-09

    A novel opal closest-packing (OCP) photonic crystal (PC) is successfully prepared for naked-eye glucose detection. This PC is fabricated via a vertical convective self-assembly method with a new type of monodisperse microsphere polymerized by co-monomers, namely, methyl methacrylate (MMA), N-isopropylacrylamide (NIPA), and 3-acrylamidophenylboronic acid (AAPBA). The OCP PC has high stability and periodically-ordered structure, showing the desired structural color. The proposed PC material displays a red shift and reduced reflection intensity when detecting glucose molecules. The red-shift wavelength reaches 75 nm, which clearly changes the structural color from brilliant blue to emerald green. This visually distinguishable color change facilitates the detection of the glucose concentrations from 3 to 20 mm, which demonstrates the potential of the opal PC material for naked-eye detection. Thus, the novel PMMA–NIPA–AAPBA OCP PC is a simply prepared and sensitive material, which shows promising use in the diagnosis of diabetes mellitus and in real-time monitoring of diabetes. Different types of appropriated recognition groups are expected to be introduced into the 3D OCP PC to form new functional materials or chemical sensors, which will extensively broaden the PC material application.

  19. Role of intermolecular interaction in crystal packing: A competition between halogen bond and electrostatic interaction

    Science.gov (United States)

    Chen, Peng-Yuan; Zhang, Lin; Zhu, Shun-Guan; Cheng, Guang-Bin

    2017-03-01

    To investigate the competition between halogen bond and electrostatic interaction and their influence on the crystal packing, four novel solvates of 1,3,5-trichloro-2,4,6-trinitrobenzene (TCTNB) and 1,3,5-tribromo-2,4,6-trinitrobenzene (TBTNB) were synthesized while the intermolecular forces and the contribution of each interaction were analyzed quantitatively. The electrostatic interaction is the main link between TCTNB, TBTNB and 1,4-dioxane respectively, while π-π interaction dominates in these two solvates of TCTNB/1,4-dimethylbenzene (PX) and TCTNB/mesitylene. The solvate interaction changes and varieties were illuminated by Hirshfeld surface analysis, and the group contributions were illustrated respectively. Molecular electrostatic potential surface (MEPs) with density functional theory (DFT) calculation was performed to compare the relative strength of electrostatic interaction and halogen bond. The result shows that MEPs can be used as a descriptor for determining the most possible intermolecular interaction under certain circumstances. The study presented here may provide the guidance for the design and synthesis of the complex with desired properties.

  20. How the Molecular Packing Affects the Room Temperature Phosphorescence in Pure Organic Compounds: Ingenious Molecular Design, Detailed Crystal Analysis, and Rational Theoretical Calculations.

    Science.gov (United States)

    Xie, Yujun; Ge, Yuwei; Peng, Qian; Li, Conggang; Li, Qianqian; Li, Zhen

    2017-02-21

    Long-lived phosphorescence at room temperature (RTP) from pure organic molecules is rare. Recent research reveals various crystalline organic molecules can realize RTP with lifetimes extending to the magnitude of second. There is little research on how molecular packing affecting RTP. Three compounds are designed with similar optical properties in solution, but tremendously different solid emission characteristics. By investigating the molecular packing arrangement in single crystals, it is found that the packing style of the compact face to face favors of long phosphorescence lifetime and high photoluminescence efficiency, with the lifetime up to 748 ms observed in the crystal of CPM ((9H-carbazol-9-yl)(phenyl)methanone). Theoretical calculation analysis also reveals this kind of packing style can remarkably reduce the singlet excited energy level and prompt electron communication between dimers. Surprisingly, CPM has two very similar single crystals, labeled as CPM and CPM-A, with almost identical crystal data, and the only difference is that molecules in CPM-A crystal take a little looser packing arrangement. X-ray diffraction and cross-polarization under magic spinning (13) C NMR spectra double confirm that they are different crystals. Interestingly, CPM-A crystal shows negligible RTP compared to the CPM crystal, once again proving that the packing style is critical to the RTP property.

  1. One more chiral drug prone to spontaneous resolution: Binary phase diagram, absolute configuration, and crystal packing of bevantolol hydrochloride

    Science.gov (United States)

    Bredikhina, Zemfira A.; Zakharychev, Dmitry V.; Gubaidullin, Aidar T.; Bredikhin, Alexander A.

    2009-11-01

    Spontaneous resolution of cardioselective β1-adrenergic blocker bevantolol hydrochloride1·HCl was established by IR spectroscopy, differential scanning calorimetry, and by single crystal X-ray analysis both for enantiopure and racemic samples. The absolute configuration of 1·HCl was evaluated through Flack parameter method. The molecular structure and crystal packing details were evaluated; the symmetry independent fragment of the P1 unit cell consists of two molecules which have almost identical spatial arrangement, but differ sufficiently in the nature of nitrogen atoms: quaternary form in one case and free amine form in the other.

  2. Self-imaging effect in photonic crystal multimode waveguides exhibiting no band gaps

    Institute of Scientific and Technical Information of China (English)

    Tianbao Yu; Xiaoqing Jiang; Qinghua Liao; Wei Qi; Jianyi Yang; Minghua Wang

    2007-01-01

    The properties of the propagating field in multimode photonic crystal waveguides (PCWs) exhibiting no photonic band gaps (PBGs) are investigated. The transmission spectrum shows that the input field can be guided with high efficiency, and resemble index-guided modes owing to the combination of total internal reflection (TIR) and distributed Bragg reflection (DBR). Self-imaging effect happens and the filling fraction determines the beating lengths. The rows of air holes decide DBR coming from the mirrors on both sides of the guiding region, which governs the transmission spectrum. It provides a new way to realize the components for both polarizations by combining PBG and TIR effects in PCWs.

  3. Closely packed Ge quantum dots in ITO matrix: influence of Ge crystallization on optical and electrical properties

    Science.gov (United States)

    Car, Tihomir; Nekić, Nikolina; Jerčinović, Marko; Salamon, Krešimir; Bogdanović-Radović, Iva; Delač Marion, Ida; Dasović, Jasna; Dražić, Goran; Ivanda, Mile; Bernstorff, Sigrid; Pivac, Branko; Kralj, Marko; Radić, Nikola; Buljan, Maja

    2016-06-01

    In the present work, a method for the low-temperature production of the material consisting of closely packed Ge QDs embedded in ITO matrix is described. The films are produced by magnetron sputtering deposition followed by thermal annealing. It is shown that the conductivity and optical properties of the films depend on the structure, Ge content in the ITO matrix as well as on the annealing conditions. The conductivity of the films changes up to seven orders of magnitude in dependence on the annealing conditions, and it shows transformation from semiconductor to metallic behavior. The optical properties are also strongly affected by the preparation and annealing conditions, so both conductivity and optical properties can be controllably manipulated. In addition, the crystallization of Ge is found to occur already at 300 °C, which is significantly lower than the crystallization temperature of Ge produced by the same method in silica and alumina matrices.

  4. Efficient propagation of TM polarized light in photonic crystal components exhibiting band gaps for TE polarized light

    DEFF Research Database (Denmark)

    Borel, Peter Ingo; Frandsen, Lars Hagedorn; Thorhauge, Morten;

    2003-01-01

    We have investigated the properties of TM polarized light in planar photonic crystal waveguide structures, which exhibit photonic band gaps for TE polarized light. Straight and bent photonic crystal waveguides and couplers have been fabricated in silicon-on-insulator material and modelled using a 3...... in a simple photonic crystal coupler with a size of ~ 20 m × 20 m. These promising features may open for the realization of ultra-compact photonic crystal components, which are easily integrated in optical communication networks....

  5. Crystal structures of a poplar thioredoxin peroxidase that exhibits the structure of glutathione peroxidases: insights into redox-driven conformational changes.

    Science.gov (United States)

    Koh, Cha San; Didierjean, Claude; Navrot, Nicolas; Panjikar, Santosh; Mulliert, Guillermo; Rouhier, Nicolas; Jacquot, Jean-Pierre; Aubry, André; Shawkataly, Omar; Corbier, Catherine

    2007-07-13

    Glutathione peroxidases (GPXs) are a group of enzymes that regulate the levels of reactive oxygen species in cells and tissues, and protect them against oxidative damage. Contrary to most of their counterparts in animal cells, the higher plant GPX homologues identified so far possess cysteine instead of selenocysteine in their active site. Interestingly, the plant GPXs are not dependent on glutathione but rather on thioredoxin as their in vitro electron donor. We have determined the crystal structures of the reduced and oxidized form of Populus trichocarpaxdeltoides GPX5 (PtGPX5), using a selenomethionine derivative. PtGPX5 exhibits an overall structure similar to that of the known animal GPXs. PtGPX5 crystallized in the assumed physiological dimeric form, displaying a pseudo ten-stranded beta sheet core. Comparison of both redox structures indicates that a drastic conformational change is necessary to bring the two distant cysteine residues together to form an intramolecular disulfide bond. In addition, a computer model of a complex of PtGPX5 and its in vitro recycling partner thioredoxin h1 is proposed on the basis of the crystal packing of the oxidized form enzyme. A possible role of PtGPX5 as a heavy-metal sink is also discussed.

  6. Crystal structures of two bis-(iodo-meth-yl)benzene derivatives: similarities and differences in the crystal packing.

    Science.gov (United States)

    McAdam, C John; Hanton, Lyall R; Moratti, Stephen C; Simpson, Jim

    2015-12-01

    The isomeric derivatives 1,2-bis-(iodo-meth-yl)benzene, (I), and 1,3-bis-(iodo-meth-yl)benzene (II), both C8H8I2, were prepared by metathesis from their di-bromo analogues. The ortho-derivative, (I), lies about a crystallographic twofold axis that bis-ects the C-C bond between the two iodo-methyl substituents. The packing in (I) relies solely on C-H⋯I hydrogen bonds supported by weak parallel slipped π-π stacking inter-actions [inter-centroid distance = 4.0569 (11) Å, inter-planar distance = 3.3789 (8) Å and slippage = 2.245 Å]. While C-H⋯I hydrogen bonds are also found in the packing of (II), type II, I⋯I halogen bonds [I⋯I = 3.8662 (2) Å] and C-H⋯π contacts feature prominently in stabilizing the three-dimensional structure.

  7. Structure and stability of designed TPR protein superhelices: unusual crystal packing and implications for natural TPR proteins.

    Science.gov (United States)

    Kajander, Tommi; Cortajarena, Aitziber L; Mochrie, Simon; Regan, Lynne

    2007-07-01

    The structure and stability of repeat proteins has been little studied in comparison to the properties of the more familiar globular proteins. Here, the structure and stability of designed tetratricopeptide-repeat (TPR) proteins is described. The TPR is a 34-amino-acid motif which adopts a helix-turn-helix structure and occurs as tandem repeats. The design of a consensus TPR motif (CTPR) has previously been described. Here, the crystal structures and stabilities of proteins that contain eight or 20 identical tandem repeats of the CTPR motif (CTPR8 and CTPR20) are presented. Both CTPR8 and CTPR20 adopt a superhelical overall structure. The structures of the different-length CTPR proteins are compared with each other and with the structures of natural TPR domains. Also, the unusual and perhaps unique crystal-packing interactions resulting in pseudo-infinite crystalline superhelices observed in the different crystal forms of CTPR8 and CTPR20 are discussed. Finally, it is shown that the thermodynamic behavior of CTPR8 and CTPR20 can be predicted from the behavior of other TPRs in this series using an Ising model-based analysis. The designed protein series CTPR2-CTPR20 covers the natural size repertoire of TPR domains and as such is an excellent model system for natural TPR proteins.

  8. Crystal-Structure Analysis with Moments of the Density-of-States: Application to Intermetallic Topologically Close-Packed Phases

    Directory of Open Access Journals (Sweden)

    Thomas Hammerschmidt

    2016-02-01

    Full Text Available The moments of the electronic density-of-states provide a robust and transparent means for the characterization of crystal structures. Using d-valent canonical tight-binding, we compute the moments of the crystal structures of topologically close-packed (TCP phases as obtained from density-functional theory (DFT calculations. We apply the moments to establish a measure for the difference between two crystal structures and to characterize volume changes and internal relaxations. The second moment provides access to volume variations of the unit cell and of the atomic coordination polyhedra. Higher moments reveal changes in the longer-ranged coordination shells due to internal relaxations. Normalization of the higher moments leads to constant (A15,C15 or very similar (χ, C14, C36, μ, and σ higher moments of the DFT-relaxed TCP phases across the 4d and 5d transition-metal series. The identification and analysis of internal relaxations is demonstrated for atomic-size differences in the V-Ta system and for different magnetic orderings in the C14-Fe 2 Nb Laves phase.

  9. Crystal structure studies of NADP+ dependent isocitrate dehydrogenase from Thermus thermophilus exhibiting a novel terminal domain.

    Science.gov (United States)

    Kumar, S M; Pampa, K J; Manjula, M; Abdoh, M M M; Kunishima, Naoki; Lokanath, N K

    2014-06-20

    NADP(+) dependent isocitrate dehydrogenase (IDH) is an enzyme catalyzing oxidative decarboxylation of isocitrate into oxalosuccinate (intermediate) and finally the product α-ketoglutarate. The crystal structure of Thermus thermophilus isocitrate dehydrogenase (TtIDH) ternary complex with citrate and cofactor NADP(+) was determined using X-ray diffraction method to a resolution of 1.80 Å. The overall fold of this protein was resolved into large domain, small domain and a clasp domain. The monomeric structure reveals a novel terminal domain involved in dimerization, very unique and novel domain when compared to other IDH's. And, small domain and clasp domain showing significant differences when compared to other IDH's of the same sub-family. The structure of TtIDH reveals the absence of helix at the clasp domain, which is mainly involved in oligomerization in other IDH's. Also, helices/beta sheets are absent in the small domain, when compared to other IDH's of the same sub family. The overall TtIDH structure exhibits closed conformation with catalytic triad residues, Tyr144-Asp248-Lys191 are conserved. Oligomerization of the protein is quantized using interface area and subunit-subunit interactions between protomers. Overall, the TtIDH structure with novel terminal domain may be categorized as a first structure of subfamily of type IV.

  10. Ground-state characterizations of systems predicted to exhibit L11 or L13 crystal structures

    Science.gov (United States)

    Nelson, Lance J.; Hart, Gus L. W.; Curtarolo, Stefano

    2012-02-01

    Despite their geometric simplicity, the crystal structures L11 (CuPt) and L13 (CdPt3) do not appear as ground states experimentally, except in Cu-Pt. We investigate the possibility that these phases are ground states in other binary intermetallic systems, but overlooked experimentally. Via the synergy between high-throughput and cluster-expansion computational methods, we conduct a thorough search for systems that may exhibit these phases and calculate order-disorder transition temperatures when they are predicted. High-throughput calculations predict L11 ground states in the systems Ag-Pd, Ag-Pt, Cu-Pt, Pd-Pt, Li-Pd, Li-Pt, and L13 ground states in the systems Cd-Pt, Cu-Pt, Pd-Pt, Li-Pd, Li-Pt. Cluster expansions confirm the appearance of these ground states in some cases. In the other cases, cluster expansion predicts unsuspected derivative superstructures as ground states. The order-disorder transition temperatures for all L11/L13 ground states were found to be sufficiently high that their physical manifestation may be possible.

  11. The dominant role of chalcogen bonding in the crystal packing of 2D/3D aromatics.

    Science.gov (United States)

    Fanfrlík, Jindřich; Přáda, Adam; Padělková, Zdeňka; Pecina, Adam; Macháček, Jan; Lepšík, Martin; Holub, Josef; Růžička, Aleš; Hnyk, Drahomír; Hobza, Pavel

    2014-09-15

    The chalcogen bond is a nonclassical σ-hole-based noncovalent interaction with emerging applications in medicinal chemistry and material science. It is found in organic compounds, including 2D aromatics, but has so far never been observed in 3D aromatic inorganic boron hydrides. Thiaboranes, harboring a sulfur heteroatom in the icosahedral cage, are candidates for the formation of chalcogen bonds. The phenyl-substituted thiaborane, synthesized and crystalized in this study, forms sulfur⋅⋅⋅π type chalcogen bonds. Quantum chemical analysis revealed that these interactions are considerably stronger than both in their organic counterparts and in the known halogen bond. The reason is the existence of a highly positive σ-hole on the positively charged sulfur atom. This discovery expands the possibilities of applying substituted boron clusters in crystal engineering and drug design.

  12. The quaternary structure of the amidase from Geobacillus pallidus RAPc8 is revealed by its crystal packing

    Energy Technology Data Exchange (ETDEWEB)

    Agarkar, Vinod B. [Advanced Research Centre for Applied Microbiology, Department of Biotechnology, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Kimani, Serah W. [Department of Molecular and Cell Biology, University of Cape Town, Rondebosch (South Africa); Cowan, Donald A.; Sayed, Muhammed F.-R. [Advanced Research Centre for Applied Microbiology, Department of Biotechnology, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Sewell, B. Trevor, E-mail: sewell@uctvms.uct.ac.za [Electron Microscope Unit, University of Cape Town, Rondebosch (South Africa); Advanced Research Centre for Applied Microbiology, Department of Biotechnology, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa)

    2006-12-01

    The amidase from G. pallidus RAPc8, a moderate thermophile, converts amides to the corresponding acids and ammonia and has application as an industrial catalyst. RAPc8 amidase has been cloned, expressed and purified, and then crystallized using the hanging-drop vapour-diffusion method. The amidase from Geobacillus pallidus RAPc8, a moderate thermophile, is a member of the nitrilase enzyme superfamily. It converts amides to the corresponding acids and ammonia and has application as an industrial catalyst. RAPc8 amidase has been cloned and functionally expressed in Escherichia coli and has been purified by heat treatment and a number of chromatographic steps. The enzyme was crystallized using the hanging-drop vapour-diffusion method. Crystals produced in the presence of 1.2 M sodium citrate, 400 mM NaCl, 100 mM sodium acetate pH 5.6 were selected for X-ray diffraction studies. A data set having acceptable statistics to 1.96 Å resolution was collected under cryoconditions using an in-house X-ray source. The space group was determined to be primitive cubic P4{sub 2}32, with unit-cell parameter a = 130.49 (±0.05) Å. The structure was solved by molecular replacement using the backbone of the hypothetical protein PH0642 from Pyrococcus horikoshii (PDB code 1j31) with all non-identical side chains substituted with alanine as a probe. There is one subunit per asymmetric unit. The subunits are packed as trimers of dimers with D3 point-group symmetry around the threefold axis in such a way that the dimer interface seen in the homologues is preserved.

  13. Molecular imprinted opal closest-packing photonic crystals for the detection of trace 17β-estradiol in aqueous solution.

    Science.gov (United States)

    Sai, Na; Wu, Yuntang; Sun, Zhong; Huang, Guowei; Gao, Zhixian

    2015-11-01

    A novel opal closest-packing (OCP) photonic crystal (PC) was prepared by the introduction of molecular imprinting technique into the OCP PC. This molecular imprinted (MI)-OCP PC was fabricated via a vertical convective self-assembly method using 17β-estradiol (E2) as template molecules for monitoring E2 in aqueous solution. Morphology characterization showed that the MI-OCP PC possessed a highly ordered three-dimensional (3D) periodically-ordered structure, showing the desired structural color. The proposed PC material displayed a reduced reflection intensity when detecting E2 in water environment, because the molecular imprinting recognition events make the optical characteristics of PC change. The Bragg diffraction intensity decreased by 19.864 a.u. with the increase of E2 concentration from 1.5 ng mL(-1) to 364.5 ng mL(-1) within 6 min, whereas there were no obvious peak intensity changes for estriol, estrone, cholesterol, testosterone and diethylstilbestrol, indicating that the MI-OCP PC had selective and rapid response for E2 molecules. The adsorption results showed that the OCP structure and homogeneous layers were created in the MI-OCP PC with higher adsorption capacity. Thus, it was learned the MI-OCP PC is a simple prepared, sensitive, selective, and easy operative material, which shows promising use in routine supervision for residue detection in food and environment.

  14. Z-score biological significance of binding hot spots of protein interfaces by using crystal packing as the reference state.

    Science.gov (United States)

    Liu, Qian; Wong, Limsoon; Li, Jinyan

    2012-12-01

    Characterization of binding hot spots of protein interfaces is a fundamental study in molecular biology. Many computational methods have been proposed to identify binding hot spots. However, there are few studies to assess the biological significance of binding hot spots. We introduce the notion of biological significance of a contact residue for capturing the probability of the residue occurring in or contributing to protein binding interfaces. We take a statistical Z-score approach to the assessment of the biological significance. The method has three main steps. First, the potential score of a residue is defined by using a knowledge-based potential function with relative accessible surface area calculations. A null distribution of this potential score is then generated from artifact crystal packing contacts. Finally, the Z-score significance of a contact residue with a specific potential score is determined according to this null distribution. We hypothesize that residues at binding hot spots have big absolute values of Z-score as they contribute greatly to binding free energy. Thus, we propose to use Z-score to predict whether a contact residue is a hot spot residue. Comparison with previously reported methods on two benchmark datasets shows that this Z-score method is mostly superior to earlier methods. This article is part of a Special Issue entitled: Computational Methods for Protein Interaction and Structural Prediction.

  15. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals.

    Science.gov (United States)

    Niazi, Muhammad R; Li, Ruipeng; Qiang Li, Er; Kirmani, Ahmad R; Abdelsamie, Maged; Wang, Qingxiao; Pan, Wenyang; Payne, Marcia M; Anthony, John E; Smilgies, Detlef-M; Thoroddsen, Sigurdur T; Giannelis, Emmanuel P; Amassian, Aram

    2015-11-23

    Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic single-crystal devices, but these suffer from scale-up challenges. Here we present a new method based on blade coating of a blend of conjugated small molecules and amorphous insulating polymers to produce OTFTs with consistently excellent performance characteristics (carrier mobility as high as 6.7 cm(2) V(-1) s(-1), low threshold voltages ofcrystallization can yield solution-printed polycrystalline organic semiconductor films with transport properties and other figures of merit on par with their single-crystal counterparts.

  16. Ni-Mn-Ga Single Crystal Exhibiting Multiple Magnetic Shape Memory Effects

    Science.gov (United States)

    Heczko, Oleg; Veřtát, Petr; Vronka, Marek; Kopecky, Vít; Perevertov, Oleksiy

    2016-09-01

    Both magnetically induced phase transformation and magnetically induced reorientation (MIR) effects were observed in one Ni50Mn28Ga22 single crystal sample by direct measurement of the magnetic field-induced strain. We investigated various twinning microstructures ranged from single twin interface to fine twinning and crossing twins to evaluate what controls the apparent twinning stress crucial for MIR. The main challenges for the applications of these effects are outlined.

  17. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals

    KAUST Repository

    Niazi, Muhammad R.

    2015-11-23

    Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic single-crystal devices, but these suffer from scale-up challenges. Here we present a new method based on blade coating of a blend of conjugated small molecules and amorphous insulating polymers to produce OTFTs with consistently excellent performance characteristics (carrier mobility as high as 6.7 cm2 V−1 s−1, low threshold voltages of<1 V and low subthreshold swings <0.5 V dec−1). Our findings demonstrate that careful control over phase separation and crystallization can yield solution-printed polycrystalline organic semiconductor films with transport properties and other figures of merit on par with their single-crystal counterparts.

  18. Fabrication of size-controllable hexagonal non-close-packed colloidal crystals and binary colloidal crystals by pyrolysis combined with plasma-electron co-irradiation of polystyrene colloidal monolaye

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Joon

    2011-02-15

    We present an unprecedented and systematic route to controllably fabricate hexagonal non-close-packed (HNCP) monolayer colloidal crystals and binary colloidal crystals (BCCs) based on plasma-electron co-irradiation of polystyrene colloidal monolayers followed by thermal decomposition. HNCP colloidal crystals with tunable particle sizes and periods could be fabricated by changing the pristine colloidal particle size and the thermal decomposition time. In addition, BCCs and trimodal colloidal crystals that are composed of different-sized colloidal particles can also be fabricated by adding small particles on the prepared HNCP colloidal crystals. Both the particle size ratio and the volume fraction of the BCCs can be widely tuned. These HNCP colloidal crystals and BCCs have various potential applications as optical and photonic materials as well as in catalysis and sensors.

  19. Sent packing: protein engineering generates a new crystal form of Pseudomonas aeruginosa DsbA1 with increased catalytic surface accessibility

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, Roisin M., E-mail: r.mcmahon1@uq.edu.au; Coinçon, Mathieu; Tay, Stephanie; Heras, Begoña [University of Queensland, 306 Carmody Road, Brisbane, Queensland 4072 (Australia); Morton, Craig J. [Biota Holdings Limited, Unit 10, 585 Blackburn Road, Notting Hill, Victoria 3168 (Australia); Scanlon, Martin J. [Monash University, 381 Royal Parade, Parkville, Victoria 3052 (Australia); Martin, Jennifer L. [University of Queensland, 306 Carmody Road, Brisbane, Queensland 4072 (Australia)

    2015-11-26

    The crystal structure of a P. aeruginosa DsbA1 variant is more suitable for fragment-based lead discovery efforts to identify inhibitors of this antimicrobial drug target. In the reported structures the active site of the protein can simultaneously bind multiple ligands introduced in the crystallization solution or via soaking. Pseudomonas aeruginosa is an opportunistic human pathogen for which new antimicrobial drug options are urgently sought. P. aeruginosa disulfide-bond protein A1 (PaDsbA1) plays a pivotal role in catalyzing the oxidative folding of multiple virulence proteins and as such holds great promise as a drug target. As part of a fragment-based lead discovery approach to PaDsbA1 inhibitor development, the identification of a crystal form of PaDsbA1 that was more suitable for fragment-soaking experiments was sought. A previously identified crystallization condition for this protein was unsuitable, as in this crystal form of PaDsbA1 the active-site surface loops are engaged in the crystal packing, occluding access to the target site. A single residue involved in crystal-packing interactions was substituted with an amino acid commonly found at this position in closely related enzymes, and this variant was successfully used to generate a new crystal form of PaDsbA1 in which the active-site surface is more accessible for soaking experiments. The PaDsbA1 variant displays identical redox character and in vitro activity to wild-type PaDsbA1 and is structurally highly similar. Two crystal structures of the PaDsbA1 variant were determined in complex with small molecules bound to the protein active site. These small molecules (MES, glycerol and ethylene glycol) were derived from the crystallization or cryoprotectant solutions and provide a proof of principle that the reported crystal form will be amenable to co-crystallization and soaking with small molecules designed to target the protein active-site surface.

  20. Crystal Crosslinked Gels with Aggregation-Induced Emissive Crosslinker Exhibiting Swelling Degree-Dependent Photoluminescence

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Oura

    2017-01-01

    Full Text Available The synthesis and photoluminescence properties of crystal crosslinked gels (CCGs with an aggregation-induced emission (AIE active crosslinker derived from tetraphenylethene (TPE is discussed in this article. The CCG was prepared from a metal organic framework (MOF with large pore aperture to allow the penetration of TPE crosslinker. The obtained CCG possessed a rectangular shape originated from the parent MOF, KUMOF. The CCG showed stimuli-responsive photoluminescence behavior depending on the swelling degree, thus the photoluminescence intensity was higher at higher swelling degree. By changing the solvent, water content, or ionic strength, the photoluminescence intensity was controllable, accompanying the change of swelling degree. Moreover, emission color tuning was also achieved by the introduction of luminescent rare earth ions to form a coordination bonding with residual carboxylate inside the CCG.

  1. Synthesis, structural and electrochemical characterization of benzimidazole compounds exhibiting a smectic C liquid crystal phase

    Science.gov (United States)

    Wei, Bingzhuo; Tan, Shuai; Liang, Ting; Cao, Siyu; Wu, Yong

    2017-04-01

    Mesomorphic benzimidazole compounds were prepared from a biphenyl benzoate based precursor by substitution reaction of alkyl bromide with 2-mercaptobenzimidazole. Molecular structures of the benzimidazole compounds were characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FT-IR) spectroscopy and elemental analysis. Differential scanning calorimetry (DSC) measurements and polarizing optical microscopic (POM) observations revealed that the benzimidazole compounds exhibited a thermotropic smectic C (SC) phase. Temperature dependent X-ray diffraction (XRD) patterns suggested a tilted bilayer smectic structure in which intermolecular hydrogen bonds between benzimidazole moieties formed lamellar arrangement. Electrochemical impedance spectroscopy (EIS) characterization suggested that the SC phase favored anhydrous proton conduction of the benzimidazole compounds and the proton conductivities showed an Arrhenius temperature dependence.

  2. ‘Ionic crystals’ consisting of trinuclear macrocations and polyoxometalate anions exhibiting single crystal to single crystal transformation: breathing of crystals

    Indian Academy of Sciences (India)

    T ARUMUGANATHAN; ASHA SIDDIKHA; SAMAR K DAS

    2017-08-01

    Ion pairing of trinuclear macrocation cluster (known as basic carboxylate), [M ₃ (μ ₃-O) (ClCH ₂COO) ₆ (H ₂O) ₃] ¹⁺ and a Keggin type polyoxometalate cluster anion [SiW ₁₂O₄₀] ⁴⁻ is stabilized with a number of crystal water molecules in composite type compounds [M ₃ (μ ₃-O)(ClCH ₂COO) ₆ (H ₂O) ₃] ₄[SiW ₁₂O₄₀] ·xH ₂O · 2ClCH ₂COOH [M = Fe ³⁺, x = 18(1); M = Cr ³⁺x = 14(2)]. When the crystals of 1 are heated at 85◦C and 135◦C for 3.5 hours in an open atmospheric condition, it goes to [Fe ₃ (μ ₃-O)(ClCH ₂COO) ₆ (H ₂O) ₃] ₄ [SiW ₁₂O₄₀] ·10H ₂O ·2ClCH ₂COOH (dehydrated 1-85o ≡ 1'), and [Fe ₃ (μ ₃-O) (ClCH ₂COO) ₆ (H ₂O) ₃] ₄ [SiW ₁₂O₄₀] · 8H ₂O · 2ClCH ₂COOH (dehydrated 1-135o ≡ 1'') respectively with the loss of considerable amount of lattice water molecules retaining their single crystallinity. On the other hand, the single crystals of compound 2, upon heating at 85◦C or 135◦C for 3.5 hours, undergo ‘crystal-to-crystal transformation’ to the single crystals of [Cr ₃ (μ ₃-O)(ClCH ₂COO) ₆ (H ₂O) ₃] ₄ [SiW₁₂O₄₀]·8H₂O·2ClCH ₂COOH (dehydrated 2 ≡ 2'). Crystal structure analyses show that the parent compounds 1 and 2 undergo molecular rearrangement (molecular motion in the solid state) in respective dehydrated compounds. Remarkably, these dehydrated crystals (1', 1'' and 2'), upon exposure to water vapor at an ambient condition, regenerate the crystals of parent compounds 1 and 2, respectively

  3. Use of X-ray diffraction, molecular simulations, and spectroscopy to determine the molecular packing in a polymer-fullerene bimolecular crystal

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Nichole Cates; Gysel, Roman; Sweetnam, Sean; McGehee, Michael D. [Department of Materials Science and Engineering, Stanford University, Stanford, CA (United States); Cho, Eunkyung [School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, GA (United States); School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA (United States); Junk, Matthias J.N.; Chmelka, Bradley F. [Department of Chemical Engineering, University of California, Santa Barbara, Santa Barbara, CA (United States); Risko, Chad; Kim, Dongwook; Bredas, Jean-Luc [School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, GA (United States); Miller, Chad E. [Department of Materials Science and Engineering, Stanford University, Stanford, CA (United States); Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, CA (United States); Richter, Lee J.; Kline, R. Joseph [National Institute of Standards and Technology, Gaithersburg, MD (United States); Heeney, Martin; McCulloch, Iain [Department of Chemistry, Imperial College London (United Kingdom); Amassian, Aram [King Abdullah University of Science and Technology (KAUST), Physical Sciences and Engineering Division, Thuwal (Saudi Arabia); Acevedo-Feliz, Daniel; Knox, Christopher [King Abdullah University of Science and Technology (KAUST), Visualization Core Laboratory, Thuwal (Saudi Arabia); Hansen, Michael Ryan; Dudenko, Dmytro [Max Planck Institute for Polymer Research, Mainz (Germany); Toney, Michael F. [Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, CA (United States)

    2012-11-27

    The molecular packing in a polymer: fullerene bimolecular crystal is determined using X-ray diffraction (XRD), molecular mechanics (MM) and molecular dynamics (MD) simulations, 2D solid-state NMR spectroscopy, and IR absorption spectroscopy. The conformation of the electron-donating polymer is significantly disrupted by the incorporation of the electron-accepting fullerene molecules, which introduce twists and bends along the polymer backbone and 1D electron-conducting fullerene channels. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  4. Use of X-ray diffraction, molecular simulations, and spectroscopy to determine the molecular packing in a polymer-fullerene bimolecular crystal

    KAUST Repository

    Miller, Nichole Cates

    2012-09-05

    The molecular packing in a polymer: fullerene bimolecular crystal is determined using X-ray diffraction (XRD), molecular mechanics (MM) and molecular dynamics (MD) simulations, 2D solid-state NMR spectroscopy, and IR absorption spectroscopy. The conformation of the electron-donating polymer is significantly disrupted by the incorporation of the electron-accepting fullerene molecules, which introduce twists and bends along the polymer backbone and 1D electron-conducting fullerene channels. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Using Latex Balls and Acrylic Resin Plates to Investigate the Stacking Arrangement and Packing Efficiency of Metal Crystals

    Science.gov (United States)

    Ohashi, Atsushi

    2015-01-01

    A high-school third-year or undergraduate first-semester general chemistry laboratory experiment introducing simple-cubic, face-centered cubic, body-centered cubic, and hexagonal closest packing unit cells is presented. Latex balls and acrylic resin plates are employed to make each atomic arrangement. The volume of the vacant space in each cell is…

  6. HEXAGONAL CLOSE-PACKED C-60

    NARCIS (Netherlands)

    de Boer, Jan; van Smaalen, Sander; Petricek, Vaclav; Dusek, Michal P.; Verheijen, Marcel A.; Meijer, G.

    1994-01-01

    C60 crystals were grown from purified powder material with a multiple sublimation technique. In addition to crystals wit a cubic close-packed (ccp) arrangement, crystals were found with a hexagonal close-packed (hcp) structure. Detailed crystallographic evidence is given, including complete refineme

  7. Br...Br and van der Waals interactions along a homologous series: crystal packing of 1,2-dibromo-4,5-dialkoxybenzenes.

    Science.gov (United States)

    Suarez, Sebastián A; Muller, Federico; Gutiérrez Suburu, Matías E; Fonrouge, Ana; Baggio, Ricardo F; Cukiernik, Fabio D

    2016-10-01

    The crystalline structures of four homologues of the 1,2-dibromo-4,5-dialkoxybenzene series [Br2C6H2(OCnH2n + 1)2 for n = 2, 12, 14 and 18] have been solved by means of single-crystal crystallography. Comparison along the series, including the previously reported n = 10 and n = 16 derivatives, shows a clear metric trend (b and c essentially fixed along the series and a growing linearly with n), in spite of some subtle differences in space groups and/or packing modes. A uniform packing pattern for the aliphatic chains has been found for the n = 12 to 18 homologues, which slightly differs from that of the n = 10 derivative. The crystalline structures of all the higher homologues (n = 10-18) seem to arise from van der Waals interchain interactions and, to a lesser extent, type II Br...Br interactions. The dominant role of interchain interactions provides direct structural support for the usual interpretation of melting point trends like that found along this series. Atoms in Molecules (AIM) analysis allows a comparison of the relative magnitude of the interchain and Br...Br interactions, an analysis validated by the measured melting enthalpies.

  8. Crystal structure studies of NADP{sup +} dependent isocitrate dehydrogenase from Thermus thermophilus exhibiting a novel terminal domain

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, S.M. [Department of Studies in Physics, University of Mysore, Mysore 570 006 (India); Pampa, K.J. [Department of Studies in Microbiology, University of Mysore, Mysore 570 006 (India); Manjula, M. [Department of Studies in Physics, University of Mysore, Mysore 570 006 (India); Abdoh, M.M.M. [Department of Physics, Faculty of Science, An-Najah National University, Nablus, West Bank, Palestine (Country Unknown); Kunishima, Naoki [Advanced Protein Crystallography Research Group, RIKEN SPring-8 Center, Harima Institute, Hyogo 679-5148 (Japan); Lokanath, N.K., E-mail: lokanath@physics.uni-mysore.ac.in [Department of Studies in Physics, University of Mysore, Mysore 570 006 (India)

    2014-06-20

    Highlights: • We determined the structure of isocitrate dehydrogenase with citrate and cofactor. • The structure reveals a unique novel terminal domain involved in dimerization. • Clasp domain shows significant difference, and catalytic residues are conserved. • Oligomerization of the enzyme is quantized with subunit-subunit interactions. • Novel domain of this enzyme is classified as subfamily of the type IV. - Abstract: NADP{sup +} dependent isocitrate dehydrogenase (IDH) is an enzyme catalyzing oxidative decarboxylation of isocitrate into oxalosuccinate (intermediate) and finally the product α-ketoglutarate. The crystal structure of Thermus thermophilus isocitrate dehydrogenase (TtIDH) ternary complex with citrate and cofactor NADP{sup +} was determined using X-ray diffraction method to a resolution of 1.80 Å. The overall fold of this protein was resolved into large domain, small domain and a clasp domain. The monomeric structure reveals a novel terminal domain involved in dimerization, very unique and novel domain when compared to other IDH’s. And, small domain and clasp domain showing significant differences when compared to other IDH’s of the same sub-family. The structure of TtIDH reveals the absence of helix at the clasp domain, which is mainly involved in oligomerization in other IDH’s. Also, helices/beta sheets are absent in the small domain, when compared to other IDH’s of the same sub family. The overall TtIDH structure exhibits closed conformation with catalytic triad residues, Tyr144-Asp248-Lys191 are conserved. Oligomerization of the protein is quantized using interface area and subunit–subunit interactions between protomers. Overall, the TtIDH structure with novel terminal domain may be categorized as a first structure of subfamily of type IV.

  9. Crystal structures and inhibitor binding properties of plant class V chitinases: the cycad enzyme exhibits unique structural and functional features.

    Science.gov (United States)

    Umemoto, Naoyuki; Kanda, Yuka; Ohnuma, Takayuki; Osawa, Takuo; Numata, Tomoyuki; Sakuda, Shohei; Taira, Toki; Fukamizo, Tamo

    2015-04-01

    A class V (glycoside hydrolase family 18) chitinase from the cycad Cycas revoluta (CrChiA) is a plant chitinase that has been reported to possess efficient transglycosylation (TG) activity. We solved the crystal structure of CrChiA, and compared it with those of class V chitinases from Nicotiana tabacum (NtChiV) and Arabidopsis thaliana (AtChiC), which do not efficiently catalyze the TG reaction. All three chitinases had a similar (α/β)8 barrel fold with an (α + β) insertion domain. In the acceptor binding site (+1, +2 and +3) of CrChiA, the Trp168 side chain was found to stack face-to-face with the +3 sugar. However, this interaction was not found in the identical regions of NtChiV and AtChiC. In the DxDxE motif, which is essential for catalysis, the carboxyl group of the middle Asp (Asp117) was always oriented toward the catalytic acid Glu119 in CrChiA, whereas the corresponding Asp in NtChiV and AtChiC was oriented toward the first Asp. These structural features of CrChiA appear to be responsible for the efficient TG activity. When binding of the inhibitor allosamidin was evaluated using isothermal titration calorimetry, the changes in binding free energy of the three chitinases were found to be similar to each other, i.e. between -9.5 and -9.8 kcal mol(-1) . However, solvation and conformational entropy changes in CrChiA were markedly different from those in NtChiV and AtChiC, but similar to those of chitinase A from Serratia marcescens (SmChiA), which also exhibits significant TG activity. These results provide insight into the molecular mechanism underlying the TG reaction and the molecular evolution from bacterial chitinases to plant class V chitinases.

  10. Nature of packs used in propellant modeling.

    Science.gov (United States)

    Maggi, F; Stafford, S; Jackson, T L; Buckmaster, J

    2008-04-01

    In recent years we have constructed closely packed spheres using the Lubachevsky-Stillinger algorithm to generate morphological models of heterogeneous solid propellants. Improvements to the algorithm now allow us to create large polydisperse packs on a laptop computer, and to create monodisperse packs with packing fractions greater than 70% which display significant crystal order. The use of these models in the physical context motivates efforts to examine in some detail the nature of the packs, including certain statistical properties. We compare packing fractions for binary packs with long-known experimental data. Also, we discuss the near-neighbor number and the radial distribution function (RDF) for monodisperse packs and make comparisons with experimental data. We also briefly discuss the RDF for bidisperse packs. We also consider bounded monodisperse packs, and pay particular attention to the near-wall structure where we identify significant order.

  11. Crystal structures of MBi{sub 2}Br{sub 7} (M = Rb, Cs) - filled variants of AX{sub 7} sphere packing

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Jen-Hui; Wolff, Alexander [Fachrichtung Chemie und Lebensmittelchemie, Technische Universitaet Dresden, 01062 Dresden (Germany); Ruck, Michael [Fachrichtung Chemie und Lebensmittelchemie, Technische Universitaet Dresden, 01062 Dresden (Germany); Max-Planck-Institut fuer Chemische Physik fester Stoffe, Noethnitzer Str. 40, 01187 Dresden (Germany)

    2016-03-15

    The reinvestigation of the pseudo-binary systems MBr-BiBr{sub 3} (M = Rb, Cs) revealed two new phases with composition MBi{sub 2}Br{sub 7}. Both compounds are hygroscopic and show brilliant yellow color. The crystal structures were solved from X-ray single crystal diffraction data. The isostructural compounds adopt a new structure type in the triclinic space group P anti 1. The lattice parameters are a = 755.68(3) pm, b = 952.56(3) pm, c = 1044.00(4) pm, α = 76.400(2) , β = 84.590(2) , γ = 76.652(2) for RbBi{sub 2}Br{sub 7} and a = 758.71(5) pm, b = 958.23(7) pm, c = 1060.24(7) pm, α = 76.194(3) , β = 83.844(4) , γ = 76.338(3) for CsBi{sub 2}Br{sub 7}. The crystal structures consist of M{sup +} cations in anticuboctahedral coordination by bromide ions and bromidobismuthate(III) layers {sup 2}{sub ∞}[Bi{sub 2}Br{sub 7}]{sup -}. The 2D layers comprise pairs of BiBr{sub 6} octahedra sharing a common edge. The Bi{sub 2}Br{sub 10} double octahedra are further connected by common vertices. The bismuth(III) atoms increase their mutual distance in the double octahedra by off-centering so that the BiBr{sub 6} octahedra are distorted. The CsBi{sub 2}Br{sub 7} type can be interpreted as a common hexagonal close sphere packing of M and Br atoms, in which 1/4 of the octahedral voids are filled by Bi atoms. The structure type was systematically analyzed and compared with alternative types of common packings. The existence of a compound with the suggested composition CsBiBr{sub 4} could not be verified experimentally. (Copyright copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  12. Layering, melting, and recrystallization of a close-packed micellar crystal under steady and large-amplitude oscillatory shear flows

    Energy Technology Data Exchange (ETDEWEB)

    López-Barrón, Carlos R., E-mail: carlos.r.lopez-barron@exxonmobil.com [ExxonMobil Chemical Company, Baytown Technology and Engineering Complex, Baytown, Texas 77520 (United States); Wagner, Norman J. [Center for Neutron Science, Department of Chemical and Biomolecular Engineering, University of Delaware, Newark, Delaware 19716 (United States); Porcar, Lionel [Institute Laue-Langevin, BP 156, F38042 Grenoble Cedex 9 (France)

    2015-05-15

    The rheology and three-dimensional microstructure of a concentrated viscoelastic solution of the triblock copolymer poly(ethylene oxide){sub 106}-poly(propylene oxide){sub 68}-poly(ethylene oxide){sub 106} (Pluronic F127) in the protic ionic liquid ethylammonium nitrate are measured by small angle neutron scattering (SANS) under flow in three orthogonal planes. This solution's shear-thinning viscosity is due to the formation of two-dimensional hexagonal close-packed (HCP) sliding layer structure. Shear-melting of the crystalline structure is observed without disruption of the self-assembled micelles, resulting in a change in flow properties. Spatially resolved measurements in the 1–2 plane reveal that both shear-melting and sliding are not uniform across the Couette gap. Melting and recrystallization of the HCP layers occur cyclically during a single large amplitude oscillatory shear (LAOS) cycle, in agreement with the “stick-slip” flow mechanism proposed by Hamley et al. [Phys. Rev. E 58, 7620–7628 (1998)]. Analysis of 3D “structural” Lissajous curves show that the cyclic melting and sliding are direct functions of the strain rate amplitude and show perfect correlation with the cyclic stress response during LAOS. Both viscosity and structural order obey the Delaware–Rutgers rule. Combining rheology with in situ spatiotemporally resolved SANS is demonstrated to elucidate the structural origins of the nonlinear rheology of complex fluids.

  13. Molecular Structure and Crystal Packing of n-Type Semiconducting Material 3′,3′-(1,4-Phenylene)bis{2′-(4′′-trifluoromethyl)phenyl}acrylonitrile

    OpenAIRE

    Tetsuji Moriguchi; Shuichi Nagamatsu; Tatsuo Okauchi; Akihiko Tsuge; Wataru Takashima; Shuji Hayase

    2014-01-01

    The exact molecular structure and the crystal packing of the n-type semiconducting material 3′,3′-(1,4-phenylene)bis{2′-(4′′-trifluoromethyl)phenyl}acrylonitrile was determined by a single crystal X-ray diffraction with twin treatment technique. The air-stable product was crystallized from dichloromethane-hexane mixed solution. The solid-state structure is the example of a typical π-π stacking with side intermolecular CN–H short contact networks.

  14. Vitamin K 3 family members - Part II: Single crystal X-ray structures, temperature-induced packing polymorphism, magneto-structural correlations and probable anti-oncogenic candidature

    Science.gov (United States)

    Rane, Sandhya; Ahmed, Khursheed; Salunke-Gawali, Sunita; Zaware, Santosh B.; Srinivas, D.; Gonnade, Rajesh; Bhadbhade, Mohan

    2008-12-01

    Temperature-induced packing polymorphism is observed for vitamin K 3 (menadione, 3-methyl-1,4-naphthoquinone, 1). Form 1a crystallizes at 300 K and 1b at 277 K both in the same space group P2 1/ c. Form 1b contains one molecule per asymmetric unit, performing anisotropy in g-factor viz. g z = 2.0082, g y = 2.0055 and g x = 2.0025, whereas form 1a contains two molecules in its asymmetric unit. Vitamin K 3 family members 2, [2-hydroxy vitamin K 3] and 3, [2-hydroxy-1-oximino vitamin K 3] also perform intrinsic neutral active naphthosemiquinone valence tautomers even in dark having spin concentrations due to hydrogen bonding and aromatic stacking interactions which are compared to vitamin K 3. The significant lateral C-H⋯O and O-H⋯π bifurcated or π-π ∗ interactions are discussed for molecular associations and radical formations. X-ray structure of 3 revealed π-π ∗ stack dimers as radicals signatured in EPR as triplet with five hyperfine splits [ Ā( 14N) = 11.9 G]. The centrosymmetric biradicals in 3 show diamagnetism at high temperature but below 10 K it shows paramagnetism with μeff as 0.19 B.M. Vitamin K 3 and its family members inhibit biological activities of acid phosphatase ( APase), which are proportional to their spin concentrations. This may relate to their probable anti-oncogenic candidature in future.

  15. Packing Smart

    Centers for Disease Control (CDC) Podcasts

    2011-08-22

    In this podcast for kids, the Kidtastics talk about packing a lunch that's not boring and is full of the power and energy kids need to make it through the day.  Created: 8/22/2011 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/22/2011.

  16. Power Packing

    Centers for Disease Control (CDC) Podcasts

    2011-08-16

    In this podcast for kids, the Kidtastics talk about how to pack a lunch safely, to help keep you from getting sick.  Created: 8/16/2011 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/16/2011.

  17. Crystal structures of human group-VIIA phospholipase A2 inhibited by organophosphorus nerve agents exhibit non-aged complexes

    Energy Technology Data Exchange (ETDEWEB)

    Samanta, Uttamkumar; Kirby, Stephen D.; Srinivasan, Prabhavathi; Cerasoli, Douglas M.; Bahnson, Brian J.; (Delaware); (USAMRIID)

    2009-09-02

    The enzyme group-VIIA phospholipase A2 (gVIIA-PLA2) is bound to lipoproteins in human blood and hydrolyzes the ester bond at the sn-2 position of phospholipid substrates with a short sn-2 chain. The enzyme belongs to a serine hydrolase superfamily of enzymes, which react with organophosphorus (OP) nerve agents. OPs ultimately exert their toxicity by inhibiting human acetycholinesterase at nerve synapses, but may additionally have detrimental effects through inhibition of other serine hydrolases. We have solved the crystal structures of gVIIA-PLA2 following inhibition with the OPs diisopropylfluorophosphate, sarin, soman and tabun. The sarin and soman complexes displayed a racemic mix of P{sub R} and P{sub S} stereoisomers at the P-chiral center. The tabun complex displayed only the P{sub R} stereoisomer in the crystal. In all cases, the crystal structures contained intact OP adducts that had not aged. Aging refers to a secondary process OP complexes can go through, which dealkylates the nerve agent adduct and results in a form that is highly resistant to either spontaneous or oxime-mediated reactivation. Non-aged OP complexes of the enzyme were corroborated by trypsin digest and matrix-assisted laser desorption ionization mass spectrometry of OP-enzyme complexes. The lack of stereoselectivity of sarin reaction was confirmed by gas chromatography/mass spectrometry using a chiral column to separate and quantitate the unbound stereoisomers of sarin following incubation with enzyme. The structural details and characterization of nascent reactivity of several toxic nerve agents is discussed with a long-term goal of developing gVIIA-PLA2 as a catalytic bioscavenger of OP nerve agents.

  18. Valve Packing

    Science.gov (United States)

    1992-01-01

    "S Glass" yarn was originally developed by NASA for high temperature space and aeronautical applications. When John Crane, Inc. required material that would withstand temperatures higher than 1,200 degrees Fahrenheit, they contacted Owens-Corning, which had developed a number of applications for the material. John Crane combines the yarn with other components to make Style 287-I packing. The product can be used in chemical processing operations, nuclear power stations, petroleum products, etc. Advantages include increased service life and reduced maintenance costs.

  19. Protein packing quality using Delaunay complexes

    DEFF Research Database (Denmark)

    Fonseca, Rasmus; Winter, Pawel; Karplus, Kevin

    2011-01-01

    A new method for estimating the packing quality of protein structures is presented. Atoms in high quality protein crystal structures are very uniformly distributed which is difficult to reproduce using structure prediction methods. Packing quality measures can therefore be used to assess structures...... of low quality and even to refine them. Previous methods mainly use the Voronoi cells of atoms to assess packing quality. The presented method uses only the lengths of edges in the Delaunay complex which is faster to compute since volumes of Voronoi cells are not evaluated explicitly. This is a novel...... application of the Delaunay complex that can improve the speed of packing quality computations. Doing so is an important step for, e.g., integrating packing measures into structure refinement methods. High- and low-resolution X-ray crystal structures were chosen to represent well- and poorly-packed structures...

  20. Enol-enamine tautomerism in crystals of 1,3-bis(pyridin-2-yl) propan-2-one: a combined crystallographic and quantum-chemical investigation of the effect of packing on tautomerization processes.

    Science.gov (United States)

    Godsi, Oded; Turner, Boaz; Suwinska, Kinga; Peskin, Uri; Eichen, Yoav

    2004-10-20

    The enolpyridine, OH-ketoenamime, NH equilibrium in crystals of 1,3-bis(pyridin-2-yl)propan-2-one was studied using temperature-dependent single-crystal X-ray diffraction. The relative population of the different tautomers was found to be sensitive to the temperature in the range of 100-300 K, illustrating the small thermodynamic difference between these two tautomers. This energy resemblance is partially attributed to the molecular packing in the crystal, where the molecules are arranged in the form of dimers. Ab initio electronic energy calculations (HF/6-31G** and MP2/6-31G**) reveal the effect of dimerization in the crystal on the electronic energy levels. Several tautomeric states were identified in the dimer of 1,3-bis(pyridin-2-yl)propan-2-one. A model is proposed in which four of these dimer states are populated in the crystal at ambient temperatures. The crystallographic data were treated according to this four-state dimer model, suggesting that the free energy of the OH-NH dimers is higher than that of the OH-OH dimers by 120 +/- 10 cal mol(-1) and that the NH-NH dimers are yet higher in free energy by 50 +/- 10 cal mol(-1).

  1. Changes in magnetic domain structure during twin boundary motion in single crystal Ni-Mn-Ga exhibiting magnetic shape memory effect

    Science.gov (United States)

    Kopecký, V.; Fekete, L.; Perevertov, O.; Heczko, O.

    2016-05-01

    The complexity of Ni-Mn-Ga single crystal originates from the interplay between ferromagnetic domain structure and ferroelastic twinned microstructure. Magnetic domain structure in the vicinity of single twin boundary was studied using magneto-optical indicator film and magnetic force microscopy technique. The single twin boundary of Type I was formed mechanically and an initial magnetization state in both variants were restored by local application of magnetic field (≈40 kA/m). The differently oriented variants exhibited either stripe or labyrinth magnetic domain pattern in agreement with the uniaxial magnetocrystalline anisotropy of the martensite. The twin boundary was then moved by compressive or tensile stress. The passage of the boundary resulted in the formation of granular or rake domains, respectively. Additionally, the specific magnetic domains pattern projected by twin boundary gradually vanished during twin boundary motion.

  2. Changes in magnetic domain structure during twin boundary motion in single crystal Ni-Mn-Ga exhibiting magnetic shape memory effect

    Directory of Open Access Journals (Sweden)

    V. Kopecký

    2016-05-01

    Full Text Available The complexity of Ni-Mn-Ga single crystal originates from the interplay between ferromagnetic domain structure and ferroelastic twinned microstructure. Magnetic domain structure in the vicinity of single twin boundary was studied using magneto-optical indicator film and magnetic force microscopy technique. The single twin boundary of Type I was formed mechanically and an initial magnetization state in both variants were restored by local application of magnetic field (≈40 kA/m. The differently oriented variants exhibited either stripe or labyrinth magnetic domain pattern in agreement with the uniaxial magnetocrystalline anisotropy of the martensite. The twin boundary was then moved by compressive or tensile stress. The passage of the boundary resulted in the formation of granular or rake domains, respectively. Additionally, the specific magnetic domains pattern projected by twin boundary gradually vanished during twin boundary motion.

  3. The pursuit of perfect packing

    CERN Document Server

    Weaire, Denis

    2000-01-01

    In 1998 Thomas Hales dramatically announced the solution of a problem that has long teased eminent mathematicians: what is the densest possible arrangement of identical spheres? The Pursuit of Perfect Packing recounts the story of this problem and many others that have to do with packing things together. The examples are taken from mathematics, physics, biology, and engineering, including the arrangement of soap bubbles in foam, atoms in a crystal, the architecture of the bee''s honeycomb, and the structure of the Giant''s Causeway. Using an informal style and with key references, the book also includes brief accounts of the lives of many of the scientists who devoted themselves to problems of packing over many centuries, together with wry comments on their efforts. It is an entertaining introduction to the field for both specialists and the more general public.

  4. Nematic director-induced switching of assemblies of hexagonally packed gold nanorods.

    Science.gov (United States)

    Thomas, Michael R; Klein, Susanne; Greasty, Robert J; Mann, Stephen; Perriman, Adam W; Richardson, Robert M

    2012-08-22

    Self-assembled disc-shaped clusters of hexagonally packed, thiol-functionalized gold nanorods are prepared and dispersed in thermotropic nematic liquid crystals. The resultant hybrid complex fluids exhibit colloidal anisotropy with very high orientational order and are characterized by SAXS as shown in the figure. Precise, reconfigurable control of the cluster orientation at very low electric field strengths (0.18 V μm(-1) ) is achieved.

  5. From Crystals to Disordered Crystals: A Hidden Order-Disorder Transition.

    Science.gov (United States)

    Tong, Hua; Tan, Peng; Xu, Ning

    2015-10-20

    To distinguish between order and disorder is of fundamental importance to understanding solids. It becomes more significant with recent observations that solids with high structural order can behave like disordered solids, while properties of disordered solids can approach crystals under certain circumstance. It is then imperative to understand when and how disorder takes effect to deviate the properties of a solid from crystals and what the correct factors are to control the behaviours of solids. Here we answer these questions by reporting the finding of a hidden order-disorder transition from crystals to disordered crystals for static packings of frictionless spheres. While the geometric indicators are mostly blind to the transition, disordered crystals already exhibit properties apart from crystals. The transition approaches the close packing of hard spheres, giving rise to the singularity of the close packing point. We evidence that both the transition and properties of disordered crystals are jointly determined by the structural order and density. Near the transition, the elastic moduli and coordination number of disordered crystals show particular pressure dependence distinct from known behaviours of both crystals and jammed solids. The discovery of the transition therefore reveals some unknown aspects of solids.

  6. Exhibit Engineering

    DEFF Research Database (Denmark)

    Mortensen, Marianne Foss

    ) a synthesis of the findings from the first two studies with findings from the literature to generate two types of results: a coherent series of suggestions for a design iteration of the studied exhibit as well as a more general normative model for exhibit engineering. Finally, another perspective...

  7. Cationic cobaltammine as anion receptor: Synthesis, characterization, single crystal X-ray structure and packing analysis of hexaamminecobalt(III) chloride ( R, R)-tartrate monohydrate

    Science.gov (United States)

    Bala, Ritu; Sharma, Raj Pal; Venugopalan, Paloth; Harrison, William T. A.

    2007-03-01

    In an effort to utilize the [Co(NH 3) 6] 3+ cation as a new anion receptor (binding agent) for dihydroxy dicarboxylate anion i.e., tartrate, orange single crystals of hexaamminecobalt(III) chloride ( R, R)-tartrate monohydrate, [Co(NH 3) 6]Cl(C 4H 4O 6)·H 2O, were obtained by reacting hexaamminecobalt(III) chloride with potassium-sodium tartrate tetrahydrate in a 1:1 molar ratio in hot water. The single crystal X-ray structure determination of [Co(NH 3) 6]Cl(C 4H 4O 6)·H 2O revealed that a distinctive network of hydrogen bonding interactions (N-H⋯O, N-H⋯Cl -, O-H⋯O) stabilize the crystal lattice. This is the first complex salt of hexaamminecobalt(III) with dihydroxy dicarboxylate anion i.e., tartrate.

  8. Human Exhibitions

    DEFF Research Database (Denmark)

    Andreassen, Rikke

    From 1870s to 1910s, more than 50 exhibitions of so-called exotic people took place in Denmark. Here large numbers of people of Asian and African origin were exhibited for the entertainment and ‘education’ of a mass audience. Several of these exhibitions took place in Copenhagen Zoo. Here different...... light on the staging of exhibitions, the daily life of the exhibitees, the wider connections between shows across Europe and the thinking of the time on matters of race, science, gender and sexuality. A window onto contemporary racial understandings, the book presents interviews with the descendants...... of displayed people, connecting the attitudes and science of the past with both our (continued) modern fascination with ‘the exotic’, and contemporary language and popular culture. As such, it will be of interest to scholars of sociology, anthropology and history working in the areas of gender and sexuality...

  9. The diffraction of X-rays by close-packed polytypic crystals containing single stacking faults. Pt. 3. Measurements of diffraction effects caused by stacking faults in plate or film form samples

    Energy Technology Data Exchange (ETDEWEB)

    Michalski, E. [Military Acad. of Technol., Warsaw (Poland). Inst. of Tech. Phys.; Piecek, W. [Military Acad. of Technol., Warsaw (Poland). Inst. of Tech. Phys.; Demianiuk, M. [Military Acad. of Technol., Warsaw (Poland). Inst. of Tech. Phys.

    1995-07-01

    A theory that describes the diffraction effects from stacking faults in close-packed polytypic crystal structures was developed in two previous papers of this series. In this paper, attention is paid to the measurement of these diffraction effects for the cases where needle-shaped or rod-like specimens cannot be made from the given sample (e.g. thin films) or when single-crystal samples should not be destroyed for preparing such specimens. For this purpose, methods of measurement based on standard X-ray diffraction equipment such as oscillation or Weissenberg cameras and a powder diffraction diffractometer have been developed A complete description of the limitation of the area of the reciprocal lattice that can intersect the Ewald sphere has been provided. Examples of the results obtained by these methods are given. The diffractometer two-dimensional scanning method, which allows an undistorted reciprocal lattice to be recorded and higher precision and results more convenient for mathematical treatment than in photographic methods to be obtained, seems to be especially interesting. (orig.).

  10. A triclinic crystal structure of the carboxy-terminal domain of HIV-1 capsid protein with four molecules in the asymmetric unit reveals a novel packing interface

    Science.gov (United States)

    Lampel, Ayala; Yaniv, Oren; Berger, Or; Bacharach, Eran; Gazit, Ehud; Frolow, Felix

    2013-01-01

    The Gag precursor is the major structural protein of the virion of human immunodeficiency virus-1 (HIV-1). Capsid protein (CA), a cleavage product of Gag, plays an essential role in virus assembly both in Gag-precursor multimerization and in capsid core formation. The carboxy-terminal domain (CTD) of CA contains 20 residues that are highly conserved across retroviruses and constitute the major homology region (MHR). Genetic evidence implies a role for the MHR in interactions between Gag precursors during the assembly of the virus, but the structural basis for this role remains elusive. This paper describes a novel triclinic structure of the HIV-1 CA CTD at 1.6 Å resolution with two canonical dimers of CA CTD in the asymmetric unit. The canonical dimers form a newly identified packing interface where interactions of four conserved MHR residues take place. This is the first structural indication that these MHR residues participate in the putative CTD–CTD interactions. These findings suggest that the molecules forming this novel interface resemble an intermediate structure that participates in the early steps of HIV-1 assembly. This interface may therefore provide a novel target for antiviral drugs. PMID:23722834

  11. Patchy particle packing under electric fields.

    Science.gov (United States)

    Song, Pengcheng; Wang, Yufeng; Wang, Yu; Hollingsworth, Andrew D; Weck, Marcus; Pine, David J; Ward, Michael D

    2015-03-01

    Colloidal particles equipped with two, three, or four negatively charged patches, which endow the particles with 2-fold, 3-fold, or tetrahedral symmetries, form 1D chains, 2D layers, and 3D packings when polarized by an AC electric field. Two-patch particles, with two patches on opposite sides of the particle (2-fold symmetry) pack into the cmm plane group and 3D packings with I4mm space group symmetry, in contrast to uncharged spherical or ellipsoidal colloids that typically crystallize into a face-centered ABC layer packing. Three-patch particles (3-fold symmetry) form chains having a 21 screw axis symmetry, but these chains pair in a manner such that each individual chain has one-fold symmetry but the pair has 21 screw axis symmetry, in an arrangement that aligns the patches that would favor Coulombic interactions along the chain. Surprisingly, some chain pairs form unanticipated double-helix regions that result from mutual twisting of the chains about each other, illustrating a kind of polymorphism that may be associated with nucleation from short chain pairs. Larger 2D domains of the three-patch particles crystallize in the p6m plane group with alignment (with respect to the field) and packing densities that suggest random disorder in the domains, whereas four-patch particles form 2D domains in which close-packed rows are aligned with the field.

  12. Exhibit Engineering

    DEFF Research Database (Denmark)

    Mortensen, Marianne Foss

    of tools and processes to guide the design of educational science exhibits. The guiding paradigm for this development is design-based research, which is characterised by an iterative cycle of design, enactment, and analysis. In the design phase, an educational intervention is planned and carried out based...... on a hypothesised learning process and the means of supporting it. In the enactment phase, the educational intervention is implemented (i.e. the planned lesson is taught, or the museum exhibit is opened to the public). Finally, the analysis phase establishes causality between emergent characteristics...... of the learning outcomes and the design characteristics of the intervention. The analysis process can yield two types of outcomes: Suggestions for the refinement of the specific design in question, and “humble” theory, which is theory that can guide the design of a category of educational interventions...

  13. Confined disordered strictly jammed binary sphere packings

    Science.gov (United States)

    Chen, D.; Torquato, S.

    2015-12-01

    Disordered jammed packings under confinement have received considerably less attention than their bulk counterparts and yet arise in a variety of practical situations. In this work, we study binary sphere packings that are confined between two parallel hard planes and generalize the Torquato-Jiao (TJ) sequential linear programming algorithm [Phys. Rev. E 82, 061302 (2010), 10.1103/PhysRevE.82.061302] to obtain putative maximally random jammed (MRJ) packings that are exactly isostatic with high fidelity over a large range of plane separation distances H , small to large sphere radius ratio α , and small sphere relative concentration x . We find that packing characteristics can be substantially different from their bulk analogs, which is due to what we term "confinement frustration." Rattlers in confined packings are generally more prevalent than those in their bulk counterparts. We observe that packing fraction, rattler fraction, and degree of disorder of MRJ packings generally increase with H , though exceptions exist. Discontinuities in the packing characteristics as H varies in the vicinity of certain values of H are due to associated discontinuous transitions between different jammed states. When the plane separation distance is on the order of two large-sphere diameters or less, the packings exhibit salient two-dimensional features; when the plane separation distance exceeds about 30 large-sphere diameters, the packings approach three-dimensional bulk packings. As the size contrast increases (as α decreases), the rattler fraction dramatically increases due to what we call "size-disparity" frustration. We find that at intermediate α and when x is about 0.5 (50-50 mixture), the disorder of packings is maximized, as measured by an order metric ψ that is based on the number density fluctuations in the direction perpendicular to the hard walls. We also apply the local volume-fraction variance στ2(R ) to characterize confined packings and find that these

  14. Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II - Crystal plasticity finite element modeling

    DEFF Research Database (Denmark)

    Abdolvand, Hamidreza; Majkut, Marta; Oddershede, Jette

    2015-01-01

    -of-mass positions and volumes as measured by three-dimensional X-ray diffraction (3DXRD) microscopy. The constructed microstructure is meshed with different element densities and for different numbers of grains. Then a selected group of twin and parent pairs are studied. It is shown that the measured average stress...... each grain, stresses in the parent and twin are quite different if they are plotted in the global coordinate system. However, if the stress tensor is rotated into the local coordinate system of the twin habit plane, all the stress components averaged over the presented population are close, except......Stress heterogeneity within each individual grain of polycrystalline Zircaloy-2 is studied using a crystal plasticity finite element (CPFE) model. For this purpose, the weighted Voronoi tessellation method is used to construct 3D geometries of more than 2600 grains based on their center...

  15. Electron paramagnetic resonance study of alinement induced by magnetic fields in two smectic-A liquid crystals not exhibiting nematic phases

    Science.gov (United States)

    Fryburg, G. C.; Gelerinter, E.

    1972-01-01

    Using vanadyl acetylacetonate (VAAC) as a paramagnetic probe, the molecular ordering in two smectic-A liquid crystals that do not display nematic phases were studied. Reproducible alinement was attained by slow cooling throughout the isotropic smectic-A transition in dc magnetic fields of 1.1 and 2.15 teslas. The degree of order attained is small for a smectic-A liquid crystal. Measurements were made of the variation of the average hyperfine splitting of the alined samples as a function of orientation relative to the dc magnetic field of the spectrometer. This functional dependence is in agreement with the theoretical prediction except where the viscosity of the liquid crystal becomes large enough to slow the tumbling of the VAAC, as indicated by asymmetry in the end lines of the spectrum.

  16. Electronically configured battery pack

    Energy Technology Data Exchange (ETDEWEB)

    Kemper, D.

    1997-03-01

    Battery packs for portable equipment must sometimes accommodate conflicting requirements to meet application needs. An electronically configurable battery pack was developed to support two highly different operating modes, one requiring very low power consumption at a low voltage and the other requiring high power consumption at a higher voltage. The configurable battery pack optimizes the lifetime and performance of the system by making the best use of all available energy thus enabling the system to meet its goals of operation, volume, and lifetime. This paper describes the cell chemistry chosen, the battery pack electronics, and tradeoffs made during the evolution of its design.

  17. 49 CFR 173.127 - Class 5, Division 5.1-Definition and assignment of packing groups.

    Science.gov (United States)

    2010-10-01

    ...) Packing Group II, any material which exhibits a mean pressure rise time less than or equal to the pressure... Packing Group I are not met. (iii) Packing Group III, any material which exhibits a mean pressure rise... packing groups. 173.127 Section 173.127 Transportation Other Regulations Relating to...

  18. Use of Pom Pons to Illustrate Cubic Crystal Structures.

    Science.gov (United States)

    Cady, Susan G.

    1997-01-01

    Describes a method that uses olefin pom pons to illustrate cubic crystal structure. Facilitates hands-on examination of different packing arrangements such as hexagonal close-packed and cubic close-packed structures. (JRH)

  19. TLC Pack Unpacked

    Science.gov (United States)

    Oberhofer, Margret; Colpaert, Jozef

    2015-01-01

    TLC Pack stands for Teaching Languages to Caregivers and is a course designed to support migrants working or hoping to work in the caregiving sector. The TLC Pack resources range from A2 to B2 level of the Common European Framework of Reference for Languages (CEFR), and will be made available online in the six project languages: Dutch, English,…

  20. Growth of YbFe2O4 single crystals exhibiting long-range charge order via the optical floating zone method

    Science.gov (United States)

    Williamson, H. L.; Mueller, T.; Angst, M.; Balakrishnan, G.

    2017-10-01

    We report the growth of YbFe2O4 single crystals via the floating zone technique, in four different oxygen partial pressures ranging from CO:CO2 = 1:5 to 1:2.5, for a cross comparison of stoichiometry effects. We obtained highly stoichiometric single crystals with sharp magnetic transitions as well as off-stoichiometric samples with smeared transitions. We also provide for the first time clear evidence of 3D long-range charge order correlations at room temperature in YbFe2O4 through high energy X-ray diffraction, identical to the analogous LuFe2O4. The correlation length obtained for YbFe2O4 in the c → direction is at least a factor of 5 larger than that observed in LuFe2O4.

  1. Packing in protein cores

    Science.gov (United States)

    Gaines, J. C.; Clark, A. H.; Regan, L.; O'Hern, C. S.

    2017-07-01

    Proteins are biological polymers that underlie all cellular functions. The first high-resolution protein structures were determined by x-ray crystallography in the 1960s. Since then, there has been continued interest in understanding and predicting protein structure and stability. It is well-established that a large contribution to protein stability originates from the sequestration from solvent of hydrophobic residues in the protein core. How are such hydrophobic residues arranged in the core; how can one best model the packing of these residues, and are residues loosely packed with multiple allowed side chain conformations or densely packed with a single allowed side chain conformation? Here we show that to properly model the packing of residues in protein cores it is essential that amino acids are represented by appropriately calibrated atom sizes, and that hydrogen atoms are explicitly included. We show that protein cores possess a packing fraction of φ ≈ 0.56 , which is significantly less than the typically quoted value of 0.74 obtained using the extended atom representation. We also compare the results for the packing of amino acids in protein cores to results obtained for jammed packings from discrete element simulations of spheres, elongated particles, and composite particles with bumpy surfaces. We show that amino acids in protein cores pack as densely as disordered jammed packings of particles with similar values for the aspect ratio and bumpiness as found for amino acids. Knowing the structural properties of protein cores is of both fundamental and practical importance. Practically, it enables the assessment of changes in the structure and stability of proteins arising from amino acid mutations (such as those identified as a result of the massive human genome sequencing efforts) and the design of new folded, stable proteins and protein-protein interactions with tunable specificity and affinity.

  2. Graphitic packing removal tool

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, K.E.; Kolsun, G.J.

    1996-12-31

    Graphitic packing removal tools are described for removal of the seal rings in one piece from valves and pumps. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

  3. Optimal Packed String Matching

    DEFF Research Database (Denmark)

    Ben-Kiki, Oren; Bille, Philip; Breslauer, Dany

    2011-01-01

    In the packed string matching problem, each machine word accommodates – characters, thus an n-character text occupies n/– memory words. We extend the Crochemore-Perrin constantspace O(n)-time string matching algorithm to run in optimal O(n/–) time and even in real-time, achieving a factor – speedup...... over traditional algorithms that examine each character individually. Our solution can be efficiently implemented, unlike prior theoretical packed string matching work. We adapt the standard RAM model and only use its AC0 instructions (i.e., no multiplication) plus two specialized AC0 packed string...

  4. 5 × 5 cm2 silicon photonic crystal slabs on glass and plastic foil exhibiting broadband absorption and high-intensity near-fields

    Science.gov (United States)

    Becker, C.; Wyss, P.; Eisenhauer, D.; Probst, J.; Preidel, V.; Hammerschmidt, M.; Burger, S.

    2014-07-01

    Crystalline silicon photonic crystal slabs are widely used in various photonics applications. So far, the commercial success of such structures is still limited owing to the lack of cost-effective fabrication processes enabling large nanopatterned areas (>> 1 cm2). We present a simple method for producing crystalline silicon nanohole arrays of up to 5 × 5 cm2 size with lattice pitches between 600 and 1000 nm on glass and flexible plastic substrates. Exclusively up-scalable, fast fabrication processes are applied such as nanoimprint-lithography and silicon evaporation. The broadband light trapping efficiency of the arrays is among the best values reported for large-area experimental crystalline silicon nanostructures. Further, measured photonic crystal resonance modes are in good accordance with light scattering simulations predicting strong near-field intensity enhancements greater than 500. Hence, the large-area silicon nanohole arrays might become a promising platform for ultrathin solar cells on lightweight substrates, high-sensitive optical biosensors, and nonlinear optics.

  5. 5 × 5 cm² silicon photonic crystal slabs on glass and plastic foil exhibiting broadband absorption and high-intensity near-fields.

    Science.gov (United States)

    Becker, C; Wyss, P; Eisenhauer, D; Probst, J; Preidel, V; Hammerschmidt, M; Burger, S

    2014-07-30

    Crystalline silicon photonic crystal slabs are widely used in various photonics applications. So far, the commercial success of such structures is still limited owing to the lack of cost-effective fabrication processes enabling large nanopatterned areas (≫ 1 cm(2)). We present a simple method for producing crystalline silicon nanohole arrays of up to 5 × 5 cm(2) size with lattice pitches between 600 and 1000 nm on glass and flexible plastic substrates. Exclusively up-scalable, fast fabrication processes are applied such as nanoimprint-lithography and silicon evaporation. The broadband light trapping efficiency of the arrays is among the best values reported for large-area experimental crystalline silicon nanostructures. Further, measured photonic crystal resonance modes are in good accordance with light scattering simulations predicting strong near-field intensity enhancements greater than 500. Hence, the large-area silicon nanohole arrays might become a promising platform for ultrathin solar cells on lightweight substrates, high-sensitive optical biosensors, and nonlinear optics.

  6. An amphidynamic inorganic-organic hybrid crystal of bromoplumbate with 1,5-bis(1-methylimidazolium)pentane exhibiting multi-functionality of a dielectric anomaly and temperature-dependent dual band emissions.

    Science.gov (United States)

    Tong, Yuan-Bo; Ren, Li-Te; Duan, Hai-Bao; Liu, Jian-Lan; Ren, Xiao-Ming

    2015-10-28

    Organic-inorganic hybrid crystals, [1,5-bis(1-methylimidazolium)pentane][PbBr3]2 (1), were achieved through the mutual diffusion of a bi-imidazolium based ionic liquid and PbBr2 solution of DMF in a glass tube. The hybrid solid crystallizes in the orthorhombic space group Fdd2 at room temperature; and is composed of one-dimensional [PbBr3]∞ chains where the neighbouring PbBr6 coordination octahedra are linked together via the face-sharing mode and the inorganic chains are surrounded by organic cations. The hybrid solid exhibits a dielectric anomaly around 443 K and dielectric relaxation above 400 K, the dielectric response mechanism was investigated using variable-temperature X-ray single crystal and powder diffraction as well as DSC techniques. Fascinatingly, this hybrid solid shows dual band emissions, moreover, the fluorescence nature of the two emission bands exhibits a distinct response to temperature, leading to a temperature-dependent fluorescence color, this feature has promising application in the emission temperature-sensing field.

  7. Optimized packings with applications

    CERN Document Server

    Pintér, János

    2015-01-01

    This volume presents a selection of case studies that address a substantial range of optimized object packings (OOP) and their applications. The contributing authors are well-recognized researchers and practitioners. The mathematical modelling and numerical solution aspects of each application case study are presented in sufficient detail. A broad range of OOP problems are discussed: these include various specific and non-standard container loading and object packing problems, as well as the stowing of hazardous and other materials on container ships, data centre resource management, automotive engineering design, space station logistic support, cutting and packing problems with placement constraints, the optimal design of LED street lighting, robust sensor deployment strategies, spatial scheduling problems, and graph coloring models and metaheuristics for packing applications. Novel points of view related to model development and to computational nonlinear, global, mixed integer optimization and heuristic st...

  8. Nasal packing and stenting

    Directory of Open Access Journals (Sweden)

    Weber, Rainer K.

    2009-01-01

    Full Text Available Nasal packs are indispensable in ENT practice. This study reviews current indications, effectiveness and risks of nasal packs and stents. In endoscopic surgery, nasal packs should always have smooth surfaces to minimize mucosal damage, improve wound healing and increase patient comfort. Functional endoscopic endonasal sinus surgery allows the use of modern nasal packs, since pressure is no longer required. So called hemostatic/resorbable materials are a first step in this direction. However, they may lead to adhesions and foreign body reactions in mucosal membranes. Simple occlusion is an effective method for creating a moist milieu for improved wound healing and avoiding dryness. Stenting of the frontal sinus is recommended if surgery fails to produce a wide, physiologically shaped drainage path that is sufficiently covered by intact tissue.

  9. Layered circle packings

    Directory of Open Access Journals (Sweden)

    David Dennis

    2005-01-01

    Full Text Available Given a bounded sequence of integers {d0,d1,d2,…}, 6≤dn≤M, there is an associated abstract triangulation created by building up layers of vertices so that vertices on the nth layer have degree dn. This triangulation can be realized via a circle packing which fills either the Euclidean or the hyperbolic plane. We give necessary and sufficient conditions to determine the type of the packing given the defining sequence {dn}.

  10. Crystal packing and hydrogen bonding in platinum(II) nucleotide complexes: X-ray crystal structure of [Pt(MeSCH(2)CH(2)SMe)(5'-GMP-N7)(2)].6H(2)O.

    Science.gov (United States)

    Djuran, Milos I; Milinkovic, Snezana U; Habtemariam, Abraha; Parsons, Simon; Sadler, Peter J

    2002-02-01

    We have synthesised the complex [Pt(CH(3)SCH(2)CH(2)SCH(3))(5'-GMP-N7)(2)].6H(2)O (1), where 5'-GMP is 5'-guanosine monophosphate, and determined its X-ray crystal structure. Pt(II) adopts a square-planar geometry in which the bases are coordinated head-to-tail (HT) in the Delta configuration. The nucleotide conformation in this complex is almost identical to that in the previously reported complex [Pt(en)(5'-GMP-N7)(2)].9H(2)O (2), in which there is outer sphere macrochelation via intramolecular H-bonding between the monoanionic phosphate groups and the coordinated ethylenediamine (en) NH. It is therefore apparent that intermolecular interactions rather than intramolecular H-bonding determines the orientation of the sugar-phosphate side-chain in these Pt(II) bisnucleotide complexes in the solid state.

  11. Packing of nonoverlapping cubic particles: Computational algorithms and microstructural characteristics.

    Science.gov (United States)

    Malmir, Hessam; Sahimi, Muhammad; Tabar, M Reza Rahimi

    2016-12-01

    Packing of cubic particles arises in a variety of problems, ranging from biological materials to colloids and the fabrication of new types of porous materials with controlled morphology. The properties of such packings may also be relevant to problems involving suspensions of cubic zeolites, precipitation of salt crystals during CO_{2} sequestration in rock, and intrusion of fresh water in aquifers by saline water. Not much is known, however, about the structure and statistical descriptors of such packings. We present a detailed simulation and microstructural characterization of packings of nonoverlapping monodisperse cubic particles, following up on our preliminary results [H. Malmir et al., Sci. Rep. 6, 35024 (2016)2045-232210.1038/srep35024]. A modification of the random sequential addition (RSA) algorithm has been developed to generate such packings, and a variety of microstructural descriptors, including the radial distribution function, the face-normal correlation function, two-point probability and cluster functions, the lineal-path function, the pore-size distribution function, and surface-surface and surface-void correlation functions, have been computed, along with the specific surface and mean chord length of the packings. The results indicate the existence of both spatial and orientational long-range order as the the packing density increases. The maximum packing fraction achievable with the RSA method is about 0.57, which represents the limit for a structure similar to liquid crystals.

  12. Packing of nonoverlapping cubic particles: Computational algorithms and microstructural characteristics

    Science.gov (United States)

    Malmir, Hessam; Sahimi, Muhammad; Tabar, M. Reza Rahimi

    2016-12-01

    Packing of cubic particles arises in a variety of problems, ranging from biological materials to colloids and the fabrication of new types of porous materials with controlled morphology. The properties of such packings may also be relevant to problems involving suspensions of cubic zeolites, precipitation of salt crystals during CO2 sequestration in rock, and intrusion of fresh water in aquifers by saline water. Not much is known, however, about the structure and statistical descriptors of such packings. We present a detailed simulation and microstructural characterization of packings of nonoverlapping monodisperse cubic particles, following up on our preliminary results [H. Malmir et al., Sci. Rep. 6, 35024 (2016), 10.1038/srep35024]. A modification of the random sequential addition (RSA) algorithm has been developed to generate such packings, and a variety of microstructural descriptors, including the radial distribution function, the face-normal correlation function, two-point probability and cluster functions, the lineal-path function, the pore-size distribution function, and surface-surface and surface-void correlation functions, have been computed, along with the specific surface and mean chord length of the packings. The results indicate the existence of both spatial and orientational long-range order as the the packing density increases. The maximum packing fraction achievable with the RSA method is about 0.57, which represents the limit for a structure similar to liquid crystals.

  13. Battery Pack Thermal Design

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, Ahmad

    2016-06-14

    This presentation describes the thermal design of battery packs at the National Renewable Energy Laboratory. A battery thermal management system essential for xEVs for both normal operation during daily driving (achieving life and performance) and off-normal operation during abuse conditions (achieving safety). The battery thermal management system needs to be optimized with the right tools for the lowest cost. Experimental tools such as NREL's isothermal battery calorimeter, thermal imaging, and heat transfer setups are needed. Thermal models and computer-aided engineering tools are useful for robust designs. During abuse conditions, designs should prevent cell-to-cell propagation in a module/pack (i.e., keep the fire small and manageable). NREL's battery ISC device can be used for evaluating the robustness of a module/pack to cell-to-cell propagation.

  14. Superconducting switch pack

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, V.C.; Wollan, J.J.

    1990-07-24

    This patent describes a superconducting switch pack at least one switch element. The switch element including a length of superconductive wire having a switching portion and two lead portions, the switching portion being between the lead portions; means for supporting the switching portion in a plane in a common mold; hardened resin means encapsulating the switching portion in the plane in a solid body; wherein the solid body has an exterior surface which is planar and substantially parallel with and spaced apart from the plane in which the switching portion is positioned. The exterior surface being exposed to the exterior of the switch pack and the resin means filling the space between the exterior surface and the plane of the switching portion so as to provide uninterrupted thermal communication between the plane of the switching portion and the exterior of the switch pack; and a heater element in thermal contact with the switching portion.

  15. Ce{sub 2}B{sub 8}O{sub 15}. High-pressure synthesis and crystal structure determination of a rare-earth polyborate exhibiting a new 'Fundamental Building Block'

    Energy Technology Data Exchange (ETDEWEB)

    Glaetzle, Matthias; Heymann, Gunter; Huppertz, Hubert [Innsbruck Univ. (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie

    2013-10-01

    The new cerium polyborate Ce{sub 2}B{sub 8}O{sub 15} was synthesized under high-pressure/high-temperature conditions of 6 GPa and 1050 C in a Walker-type multianvil apparatus. The single-crystal structure determination revealed that the new compound crystallizes in the space group P2/c with the lattice parameters a = 916.6(2), b = 421.0(1), c = 1248.9(3) pm, {beta} = 116.7(1) , V = 0.4303(2) nm{sup 3}, R1 = 0.0356, and wR2 = 0.0504. The crystal structure of Ce{sub 2}B{sub 8}O{sub 15} exhibits a new fundamental building block (FBB) in borate chemistry that consists of four BO{sub 4} tetrahedra and can be written as 4{open_square}: [{Phi}] left angle 3{open_square} right angle vertical stroke {open_square} vertical stroke. These FBB are interconnected via common corners, forming a complex threedimensional network that contains the Ce{sup 3+} cations. Ce{sub 2}B{sub 8}O{sub 15} represents the most boron rich rare-earth borate synthesized under high-pressure/high-temperature conditions so far. We report about the synthetic conditions, structural details, thermal behaviour, and the IR/Raman spectra of Ce{sub 2}B{sub 8}O{sub 15}. (orig.)

  16. The effect of nanoparticle packing on capacitive electrode performance.

    Science.gov (United States)

    Lee, Younghee; Noh, Seonmyeong; Kim, Min-Sik; Kong, Hye Jeong; Im, Kyungun; Kwon, Oh Seok; Kim, Sungmin; Yoon, Hyeonseok

    2016-06-09

    Nanoparticles pack together to form macro-scale electrodes in various types of devices, and thus, optimization of the nanoparticle packing is a prerequisite for the realization of a desirable device performance. In this work, we provide in-depth insight into the effect of nanoparticle packing on the performance of nanoparticle-based electrodes by combining experimental and computational findings. As a model system, polypyrrole nanospheres of three different diameters were used to construct pseudocapacitive electrodes, and the performance of the electrodes was examined at various nanosphere diameter ratios and mixed weight fractions. Two numerical algorithms are proposed to simulate the random packing of the nanospheres on the electrode. The binary nanospheres exhibited diverse, complicated packing behaviors compared with the monophasic packing of each nanosphere species. The packing of the two nanosphere species with lower diameter ratios at an optimized composition could lead to more dense packing of the nanospheres, which in turn could contribute to better device performance. The dense packing of the nanospheres would provide more efficient transport pathways for ions because of the reduced inter-nanosphere pore size and enlarged surface area for charge storage. Ultimately, it is anticipated that our approach can be widely used to define the concept of "the best nanoparticle packing" for desirable device performance.

  17. Semiconducting polymer single crystals and devices (Conference Presentation)

    Science.gov (United States)

    Dong, Huanli

    2016-11-01

    Highly ordered organic semiconductors in solid state with optimal molecular packing are critical to their electrical performance. Single crystals with long-range molecular orders and nearly perfect molecular packing are the best candidates, which already have been verified to exhibit the highest performance whether based on inorganic or small organic materials. However, in comparison, preparing high quality polymer crystals remains a big challenge in polymer science because of the easy entanglements of the long and flexible polymer chains during self-assembly process, which also significantly limits the development of their crystalline polymeric electronic devices. Here we have carried out systematical investigations to prepare high quality semiconducting polymers and high performance semiconducting polymer crystal optoelectronic devices have been successfully fabricated. The semiconducting polymeric devices demonstrate significantly enhanced charge carreir transport compared to their thin films, and the highest carreir mobiltiy could be approcahing 30 cm2 V-1s-1, one of the highest mobiltiy values for polymer semiconductors.

  18. DIY Fraction Pack.

    Science.gov (United States)

    Graham, Alan; Graham, Louise

    2003-01-01

    Describes a very successful attempt to teach fractions to year 5 pupils based on pupils making their own fraction pack. Children decided for themselves how to make the fractional slices used in the activity using colored cardboard sheets and templates of a paper circle consisting of 24 equal slices. (Author/NB)

  19. Small non-polar complexes exhibiting significant piezoelectric properties: Solvothermal synthesis and crystal structures of MO5V(tren)·H2O (M=Mo and W; tren=tris(2-aminoethyl)amine)

    Science.gov (United States)

    Rasmussen, M.; Näther, C.; Bismayer, U.; Bensch, W.

    2012-11-01

    The two isostructural complexes MO5V(tren)·H2O (M=Mo (1) and W (2)) were synthesized under solvothermal conditions at pH≈12 crystallizing in the non-centrosymmetric space group P212121. The structures are constructed by a distorted tetrahedral [MO4]2- anion bound via one shared oxygen atom to a severely distorted [VIVN4O]2+ complex completing the octahedral coordination around the V centre. The two O atoms in the VN4O2 octahedron are in cis position. The two compounds represent rare examples where the [MO4]2- anion is acting as a ligand. Both compounds exhibit a piezoelectric effect which is more pronounced for M=Mo. The samples are further characterized with IR and UV/Vis spectroscopy and thermal analysis.

  20. The Six Pack Model

    DEFF Research Database (Denmark)

    Andersen, Henrik; Ritter, Thomas

    Ever seen a growth strategies fail because it was not connect ed to the firm’s customer base? Or a customer relationship strategy falters just because it was the wrong thing to do with that given customer? This article presents the six pack model, a tool that makes growth profitable and predictable....... Not all customers can and should grow – thus a firm needs to classify its customers in order to implement the right customer strategy....

  1. An amino acid code for β-sheet packing structure.

    Science.gov (United States)

    Joo, Hyun; Tsai, Jerry

    2014-09-01

    To understand the relationship between protein sequence and structure, this work extends the knob-socket model in an investigation of β-sheet packing. Over a comprehensive set of β-sheet folds, the contacts between residues were used to identify packing cliques: sets of residues that all contact each other. These packing cliques were then classified based on size and contact order. From this analysis, the two types of four-residue packing cliques necessary to describe β-sheet packing were characterized. Both occur between two adjacent hydrogen bonded β-strands. First, defining the secondary structure packing within β-sheets, the combined socket or XY:HG pocket consists of four residues i, i+2 on one strand and j, j+2 on the other. Second, characterizing the tertiary packing between β-sheets, the knob-socket XY:H+B consists of a three-residue XY:H socket (i, i+2 on one strand and j on the other) packed against a knob B residue (residue k distant in sequence). Depending on the packing depth of the knob B residue, two types of knob-sockets are found: side-chain and main-chain sockets. The amino acid composition of the pockets and knob-sockets reveal the sequence specificity of β-sheet packing. For β-sheet formation, the XY:HG pocket clearly shows sequence specificity of amino acids. For tertiary packing, the XY:H+B side-chain and main-chain sockets exhibit distinct amino acid preferences at each position. These relationships define an amino acid code for β-sheet structure and provide an intuitive topological mapping of β-sheet packing.

  2. Crystallization process

    Science.gov (United States)

    Adler, Robert J.; Brown, William R.; Auyang, Lun; Liu, Yin-Chang; Cook, W. Jeffrey

    1986-01-01

    An improved crystallization process is disclosed for separating a crystallizable material and an excluded material which is at least partially excluded from the solid phase of the crystallizable material obtained upon freezing a liquid phase of the materials. The solid phase is more dense than the liquid phase, and it is separated therefrom by relative movement with the formation of a packed bed of solid phase. The packed bed is continuously formed adjacent its lower end and passed from the liquid phase into a countercurrent flow of backwash liquid. The packed bed extends through the level of the backwash liquid to provide a drained bed of solid phase adjacent its upper end which is melted by a condensing vapor.

  3. Heuristics for Multidimensional Packing Problems

    DEFF Research Database (Denmark)

    Egeblad, Jens

    In this thesis we consider solution methods for packing problems. Packing problems occur in many different situations both directly in the industry and as sub-problems of other problems. High-quality solutions for problems in the industrial sector may be able to reduce transportation and production...... costs significantly. For packing problems in general are given a set of items and one of more containers. The items must be placed within the container such that some objective is optimized and the items do not overlap. Items and container may be rectangular or irregular (e.g. polygons and polyhedra...... methods. Two important problem variants are the knapsack packing problem and the strip-packing problem. In the knapsack packing problem, each item is given a profit value, and the problem asks for the subset with maximal profit that can be placed within one container. The strip-packing problem asks...

  4. Tuning of intermolecular interactions results in packing diversity in imidazolin-5-ones

    Indian Academy of Sciences (India)

    Ashish Singh; Basanta Kumar Rajbongshi; Gurunath Ramanathan

    2014-09-01

    Crystal structures of four green fluorescent protein (GFP) chromophore analogues with different packing interactions could be tuned by appropriate substitutions around the imidazolin-5-one ring are reported here. Compound 1 was crystallized from tetrahydrofuran at room temperature while compounds 2-4 have been crystallized from a mixture of methanol and dichloromethane in 3:1 ratio. Molecule 1, 2 and 3 crystallized in monoclinic lattice while molecule 4 preferred to crystallize in a triclinic crystal system. The crystal packing of these molecules was stabilized by C-H$\\ldots$ stacking and C-H $\\ldots$ O type of supramolecular interactions. The results reveal that packing diversity can be easily accomplished in these molecules by tuning the substituents around the imidazolin-5-one ring. Photophysical studies also reveal that all have good quantum yield and fluoresce typically in red region due to presence of electron donating groups around the imidazolin-5-one ring.

  5. Supramolecular layers and versatile packing modes: The solid state behavior of ortho, ortho-linked bisphenols

    Science.gov (United States)

    Augustin, André U.; Katzsch, Felix; Prior, Stephen H.; Gruber, Tobias

    2017-05-01

    A series of ortho-ortho-linked bisphenols featuring electron-withdrawing groups (EWGs) attached to the phenolic rings is reported. Their respective molecular structures and packing behaviors have been studied by X-ray diffraction, comparatively discussed and put into relation with the unsubstituted mother compound. Except for the mother compound, the molecular structures of all bisphenols studied here exhibit distorted aromatic moieties. Hence, the substituents studied here prevent proximal positioning of phenolic units and the formation of strong Osbnd H⋯O hydrogen bonds. In the packing of the underivatized bisphenol we found a strand-like molecular arrangement featuring strong Osbnd H⋯O hydrogen bonds and extensive edge-to-face contacts (Csbnd H⋯π) between the bisphenol molecules. The introduction of EWGs to the aromatic moieties changes these intermolecular interactions into face-to-face contacts resulting either in bisphenol stacks or handshake-like motifs between two bisphenol molecules. In both cases, the Csbnd H⋯π interactions are more or less replaced by Csbnd H⋯O contacts as the prevalent non-covalent interaction. In the packing of two nitro bisphenols in their DMSO inclusion compounds an exciting layered arrangement is observed, which also matches with the pronounced foliated habitus of their crystals. Additionally, proton NMR was used to establish the binding coefficients between the respective bisphenols and DMSO in solution.

  6. New bounds for multi-dimensional packing

    OpenAIRE

    Seiden, S.; Stee, van, Rob

    2001-01-01

    New upper and lower bounds are presented for a multi-dimensional generalization of bin packing called box packing. Several variants of this problem, including bounded space box packing, square packing, variable sized box packing and resource augmented box packing are also studied. The main results, stated for d=2, are as follows: A new upper bound of 2.66013 for online box packing, a new $14/9 + varepsilon$ polynomial time offline approximation algorithm for square packing, a new upper bound ...

  7. High-throughput Image Analysis of Fibrillar Materials: A Case Study on Polymer Nanofiber Packing, Alignment, and Defects in OFETs.

    Science.gov (United States)

    Persson, Nils; Rafshoon, Joshua; Naghshpour, Kaylie; Fast, Tony; Chu, Ping-Hsun; McBride, Michael; Risteen, Bailey; Grover, Martha A; Reichmanis, Elsa

    2017-09-27

    High-throughput discovery of process-structure-property relationships in materials through an informatics-enabled empirical approach is an increasingly utilized technique in materials research due to the rapidly expanding availability of data. Here, process-structure-property relationships are extracted for the nucleation, growth and deposition of semiconducting poly(3-hexylthiophene) (P3HT) nanofibers used in organic field effect transistors, via high-throughput image analysis. This study is performed using an automated image analysis pipeline combining existing open-source software and new algorithms, enabling the rapid evaluation of structural metrics for images of fibrillar materials, including local orientational order, fiber length density, and fiber length distributions. We observe that microfluidic processing leads to fibers that pack with unusually high density, while sonication yields fibers that pack sparsely with low alignment. The is attributed to differences in their crystallization mechanisms. P3HT nanofiber packing during thin film deposition exhibits behavior suggesting that fibers are confined to packing in two-dimensional layers. We find that fiber alignment, a feature correlated with charge carrier mobility, is driven by increasing fiber length, and that shorter fibers tend to segregate to the buried dielectric interface during deposition, creating potentially performance-limiting defects in alignment. Another barrier to perfect alignment is the curvature of P3HT fibers; we propose a mechanistic simulation of fiber growth that reconciles both this curvature and the log-normal distribution of fiber lengths inherent to the fiber populations under consideration.

  8. Packing anchored rectangles

    CERN Document Server

    Dumitrescu, Adrian

    2011-01-01

    Let $S$ be a set of $n$ points in the unit square $[0,1]^2$, one of which is the origin. We construct $n$ pairwise interior-disjoint axis-aligned empty rectangles such that the lower left corner of each rectangle is a point in $S$, and the rectangles jointly cover at least a positive constant area (about 0.09). This is a first step towards the solution of a longstanding conjecture that the rectangles in such a packing can jointly cover an area of at least 1/2.

  9. Packing ellipsoids with overlap

    CERN Document Server

    Uhler, Caroline

    2012-01-01

    The problem of packing ellipsoids of different sizes and shapes into an ellipsoidal container so as to minimize a measure of overlap between ellipsoids is considered. A bilevel optimization formulation is given, together with an algorithm for the general case and a simpler algorithm for the special case in which all ellipsoids are in fact spheres. Convergence results are proved and computational experience is described and illustrated. The motivating application - chromosome organization in the human cell nucleus - is discussed briefly, and some illustrative results are presented.

  10. New bounds for multi-dimensional packing

    NARCIS (Netherlands)

    S. Seiden; R. van Stee (Rob)

    2001-01-01

    textabstractNew upper and lower bounds are presented for a multi-dimensional generalization of bin packing called box packing. Several variants of this problem, including bounded space box packing, square packing, variable sized box packing and resource augmented box packing are also studied. The

  11. New bounds for multi-dimensional packing

    NARCIS (Netherlands)

    Seiden, S.; Stee, R. van

    2001-01-01

    New upper and lower bounds are presented for a multi-dimensional generalization of bin packing called box packing. Several variants of this problem, including bounded space box packing, square packing, variable sized box packing and resource augmented box packing are also studied. The main results,

  12. Two typical structure patterns in jammed monodisperse disk packings at high densities

    Science.gov (United States)

    Yuan, Ye; Jin, Weiwei; Liu, Lufeng; Li, Shuixiang

    2016-11-01

    We generate a large number of monodisperse disk packings in two dimensions via geometric-based packing algorithms including the relaxation algorithm and the Torquato-Jiao algorithm. Using the geometric-structure approach, a clear boundary of the geometrical feasible region in the order map is found which quite differs from that of the jammed region. For a certain packing density higher than 0.83, the crystalline degree varies in different packing samples. We find that the local hexatic order may increase in two fairly different ways as the system densifies. Therefore, two typical non-equilibrium jammed patterns, termed polycrystal and distorted crystal, are defined at high packing densities. Furthermore, their responses to isotropic compression are investigated using a compression-relaxation molecular dynamic protocol. The distorted crystal pattern is more stable than the polycrystal one with smaller displacements despite its low occurrence frequency. The results are helpful in understanding the structure and phase transition of disk packings.

  13. Cell packing structures

    KAUST Repository

    Pottmann, Helmut

    2015-03-03

    This paper is an overview of architectural structures which are either composed of polyhedral cells or closely related to them. We introduce the concept of a support structure of such a polyhedral cell packing. It is formed by planar quads and obtained by connecting corresponding vertices in two combinatorially equivalent meshes whose corresponding edges are coplanar and thus determine planar quads. Since corresponding triangle meshes only yield trivial structures, we focus on support structures associated with quad meshes or hex-dominant meshes. For the quadrilateral case, we provide a short survey of recent research which reveals beautiful relations to discrete differential geometry. Those are essential for successfully initializing numerical optimization schemes for the computation of quad-based support structures. Hex-dominant structures may be designed via Voronoi tessellations, power diagrams, sphere packings and various extensions of these concepts. Apart from the obvious application as load-bearing structures, we illustrate here a new application to shading and indirect lighting. On a higher level, our work emphasizes the interplay between geometry, optimization, statics, and manufacturing, with the overall aim of combining form, function and fabrication into novel integrated design tools.

  14. ExactPack Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Jr., Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Israel, Daniel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Woods, Charles Nathan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kaul, Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Walter, Jr., John William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rogers, Michael Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-09

    For code verification, one compares the code output against known exact solutions. There are many standard test problems used in this capacity, such as the Noh and Sedov problems. ExactPack is a utility that integrates many of these exact solution codes into a common API (application program interface), and can be used as a stand-alone code or as a python package. ExactPack consists of python driver scripts that access a library of exact solutions written in Fortran or Python. The spatial profiles of the relevant physical quantities, such as the density, fluid velocity, sound speed, or internal energy, are returned at a time specified by the user. The solution profiles can be viewed and examined by a command line interface or a graphical user interface, and a number of analysis tools and unit tests are also provided. We have documented the physics of each problem in the solution library, and provided complete documentation on how to extend the library to include additional exact solutions. ExactPack’s code architecture makes it easy to extend the solution-code library to include additional exact solutions in a robust, reliable, and maintainable manner.

  15. Haphazard Packing of Unequal Spheres

    Institute of Scientific and Technical Information of China (English)

    叶大年; 张金民

    1991-01-01

    Haphazard packing of equal and unequal spheres can be performed for the spheres of molecular sieve material with a density of 1.80.The packing of such spheres in air is equivalent to that of nat-ural grains in water.Packing concentrations of equal spheres have been obtained for different pac-king intensities.Unequal spheres can be regarded as equal ones in a wide range of diameter ratios,so far as the packing concentration is concerned.A threshold of diameter ratio exists at 0.70,be-low which the packing concentration is expected to increase.The variation curves of concentration vs.diameter ratio were established in the experiment.The result will help us to understand the process of sedimentation and the concentration of voids in sedimentary rocks.

  16. Small non-polar complexes exhibiting significant piezoelectric properties: Solvothermal synthesis and crystal structures of MO{sub 5}V(tren){center_dot}H{sub 2}O (M=Mo and W; tren=tris(2-aminoethyl)amine)

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, M.; Naether, C. [Institut fuer Anorganische Chemie, Christian-Albrechts-Universitaet Kiel, Max-Eyth-Str. 2, D-24118 Kiel (Germany); Bismayer, U. [Mineralogisch-Petrographisches Institut, Universitaet Hamburg, Grindelallee 48 20146 Hamburg (Germany); Bensch, W., E-mail: wbensch@ac.uni-kiel.de [Institut fuer Anorganische Chemie, Christian-Albrechts-Universitaet Kiel, Max-Eyth-Str. 2, D-24118 Kiel (Germany)

    2012-11-15

    The two isostructural complexes MO{sub 5}V(tren){center_dot}H{sub 2}O (M=Mo (1) and W (2)) were synthesized under solvothermal conditions at pH Almost-Equal-To 12 crystallizing in the non-centrosymmetric space group P2{sub 1}2{sub 1}2{sub 1}. The structures are constructed by a distorted tetrahedral [MO{sub 4}]{sup 2-} anion bound via one shared oxygen atom to a severely distorted [V{sup IV}N{sub 4}O]{sup 2+} complex completing the octahedral coordination around the V centre. The two O atoms in the VN{sub 4}O{sub 2} octahedron are in cis position. The two compounds represent rare examples where the [MO{sub 4}]{sup 2-} anion is acting as a ligand. Both compounds exhibit a piezoelectric effect which is more pronounced for M=Mo. The samples are further characterized with IR and UV/Vis spectroscopy and thermal analysis. - Graphical abstract: The complexes [(V(tren)O)(MO4)]{center_dot}H2O (M = Mo, W; tren = tris(2-aminoethyl)amine)) composed of vertex-linked [MO4]{sup 2-} tetrahedron and [VN4O6]{sup 2+}octahedron. Highlights: Black-Right-Pointing-Pointer [MO{sub 4}]{sup 2-} tetrahedron (M=Mo, W) acting as ligand. Black-Right-Pointing-Pointer Jahn-Teller and steric distortion of the [VN{sub 4}O{sub 2}]{sup 2+} octahedron. Black-Right-Pointing-Pointer Non-centrosymmetric complexes exhibiting pronounced piezoelectric effect.

  17. Method for dense packing discovery.

    Science.gov (United States)

    Kallus, Yoav; Elser, Veit; Gravel, Simon

    2010-11-01

    The problem of packing a system of particles as densely as possible is foundational in the field of discrete geometry and is a powerful model in the material and biological sciences. As packing problems retreat from the reach of solution by analytic constructions, the importance of an efficient numerical method for conducting de novo (from-scratch) searches for dense packings becomes crucial. In this paper, we use the divide and concur framework to develop a general search method for the solution of periodic constraint problems, and we apply it to the discovery of dense periodic packings. An important feature of the method is the integration of the unit-cell parameters with the other packing variables in the definition of the configuration space. The method we present led to previously reported improvements in the densest-known tetrahedron packing. Here, we use the method to reproduce the densest-known lattice sphere packings and the best-known lattice kissing arrangements in up to 14 and 11 dimensions, respectively, providing numerical evidence for their optimality. For nonspherical particles, we report a dense packing of regular four-dimensional simplices with density ϕ=128/219≈0.5845 and with a similar structure to the densest-known tetrahedron packing.

  18. Packing of crystalline structures of binary hard spheres: An analytical approach and application to amorphization

    NARCIS (Netherlands)

    Brouwers, H.J.H.

    2007-01-01

    The geometrical stability of the three lattices of the cubic crystal system, viz. face-centered cubic (fcc), body-centered cubic (bcc), and simple cubic (sc), consisting of bimodal discrete hard spheres, and the transition to amorphous packing is studied. First, the random close packing (rcp) fracti

  19. Packing of crystalline structures of binary hard spheres: an analytical approach and application to amorphisation

    NARCIS (Netherlands)

    Brouwers, Jos

    2007-01-01

    The geometrical stability of the three lattices of the cubic crystal system, viz. face-centered cubic (fcc), body-centered cubic (bcc), and simple cubic (sc), consisting of bimodal discrete hard spheres, and the transition to amorphous packing is studied. First, the random close packing (rcp)

  20. Polarizable protein packing.

    Science.gov (United States)

    Ng, Albert H; Snow, Christopher D

    2011-05-01

    To incorporate protein polarization effects within a protein combinatorial optimization framework, we decompose the polarizable force field AMOEBA into low order terms. Including terms up to the third-order provides a fair approximation to the full energy while maintaining tractability. We represent the polarizable packing problem for protein G as a hypergraph and solve for optimal rotamers with the FASTER combinatorial optimization algorithm. These approximate energy models can be improved to high accuracy [root mean square deviation (rmsd) < 1 kJ mol(-1)] via ridge regression. The resulting trained approximations are used to efficiently identify new, low-energy solutions. The approach is general and should allow combinatorial optimization of other many-body problems. Copyright © 2011 Wiley Periodicals, Inc.

  1. Polarizable protein packing

    KAUST Repository

    Ng, Albert H.

    2011-01-24

    To incorporate protein polarization effects within a protein combinatorial optimization framework, we decompose the polarizable force field AMOEBA into low order terms. Including terms up to the third-order provides a fair approximation to the full energy while maintaining tractability. We represent the polarizable packing problem for protein G as a hypergraph and solve for optimal rotamers with the FASTER combinatorial optimization algorithm. These approximate energy models can be improved to high accuracy [root mean square deviation (rmsd) < 1 kJ mol -1] via ridge regression. The resulting trained approximations are used to efficiently identify new, low-energy solutions. The approach is general and should allow combinatorial optimization of other many-body problems. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011 Copyright © 2011 Wiley Periodicals, Inc.

  2. Computational strain gradient crystal plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Kysar, Jeffrey W.

    2014-01-01

    of plane crystal plasticity are studied: pure shear of a single crystal between rigid platens as well as plastic deformation around cylindrical voids in hexagonal close packed and face centered cubic crystals. Effective in-plane constitutive slip parameters for plane strain deformation of specifically...

  3. Parallel Exhibits: Combining Physical and Virtual Exhibits

    NARCIS (Netherlands)

    L. Lischke; T. Dingler; S. Schneegaß; A. Schmidt; M. van der Vaart; P. Wozniak

    2014-01-01

    People have a special fascination for original physical objects, their texture, and visible history. However, the digitization of exhibits and the use of these data is a current challenge for museums. We believe that museums need to capitalize on the affordances of physical exhibits to help users na

  4. Form, symmetry and packing of biomacromolecules. II. Serotypes of human rhinovirus

    Science.gov (United States)

    Janner, A.

    2010-05-01

    The differentiation of the human rhinovirus into serotypes, all having very similar structures and the same architecture, is shown to be related to the packing of the viruses in the crystal and to its space-group symmetry.

  5. Non-covalent interactions in 2-methylimidazolium copper(II) complex (MeImH)2[Cu(pfbz)4]: Synthesis, characterization, single crystal X-ray structure and packing analysis

    Science.gov (United States)

    Sharma, Raj Pal; Saini, Anju; Kumar, Santosh; Kumar, Jitendra; Sathishkumar, Ranganathan; Venugopalan, Paloth

    2017-01-01

    A new anionic copper(II) complex, (MeImH)2 [Cu(pfbz)4] (1) where, MeImH = 2-methylimidazolium and pfbz = pentafluorobenzoate has been isolated by reacting copper(II) sulfate pentahydrate, pentafluorobenzoic acid and 2-methylimidazole in ethanol: water mixture in 1:2:2 molar ratio. This complex 1 has been characterized by elemental analysis, thermogravimetric analysis, spectroscopic techniques (UV-Vis, FT-IR) and conductance measurements. The complex salt crystallizes in monoclinic crystal system with space group C2/c. Single crystal X-ray structure determination revealed the presence of discrete ions: [Cu(pfbz)4]2- anion and two 2-methylimidazolium cation (C4H7N2)+. The crystal lattice is stabilized by strong hydrogen bonding and F⋯F interactions between cationic-anionic and the anionic-anionic moieties respectively, besides π-π interactions.

  6. Britain exhibition at CERN

    CERN Multimedia

    Bertin; CERN PhotoLab

    1969-01-01

    The United Kingdom inaugurated the Industrial Exhibitions in 1968, and it wasn't till 1971 that other countries staged exhibitions at CERN. This photo was taken in 1969, at the second British exhibition, where 16 companies were present.

  7. Packing Products: Polystyrene vs. Cornstarch

    Science.gov (United States)

    Starr, Suzanne

    2009-01-01

    Packing materials such as polystyrene take thousands of years to decompose, whereas packing peanuts made from cornstarch, which some companies are now using, can serve the same purpose, but dissolve in water. The author illustrates this point to her class one rainy day using the sculptures students made from polystyrene and with the cornstarch…

  8. Heuristics for Multidimensional Packing Problems

    DEFF Research Database (Denmark)

    Egeblad, Jens

    for a minimum height container required for the items. The main contributions of the thesis are three new heuristics for strip-packing and knapsack packing problems where items are both rectangular and irregular. In the two first papers we describe a heuristic for the multidimensional strip-packing problem...... for a three-dimensional knapsack packing problem involving furniture is presented in the fourth paper. The heuristic is based on a variety of techniques including tree-search, wall-building, and sequential placement. The solution process includes considerations regarding stability and load bearing strength...... paper. Ensuring that a loaded consignment of items are balanced throughout a container can reduce fuel consumption and prolong the life-span of vehicles. The heuristic can be used as a post-processing tool to reorganize an existing solution to a packing problem. A method for optimizing the placement...

  9. Mapping the distribution of packing topologies within protein interiors shows predominant preference for specific packing motifs

    Directory of Open Access Journals (Sweden)

    Banerjee Rahul

    2011-05-01

    Full Text Available Abstract Background Mapping protein primary sequences to their three dimensional folds referred to as the 'second genetic code' remains an unsolved scientific problem. A crucial part of the problem concerns the geometrical specificity in side chain association leading to densely packed protein cores, a hallmark of correctly folded native structures. Thus, any model of packing within proteins should constitute an indispensable component of protein folding and design. Results In this study an attempt has been made to find, characterize and classify recurring patterns in the packing of side chain atoms within a protein which sustains its native fold. The interaction of side chain atoms within the protein core has been represented as a contact network based on the surface complementarity and overlap between associating side chain surfaces. Some network topologies definitely appear to be preferred and they have been termed 'packing motifs', analogous to super secondary structures in proteins. Study of the distribution of these motifs reveals the ubiquitous presence of typical smaller graphs, which appear to get linked or coalesce to give larger graphs, reminiscent of the nucleation-condensation model in protein folding. One such frequently occurring motif, also envisaged as the unit of clustering, the three residue clique was invariably found in regions of dense packing. Finally, topological measures based on surface contact networks appeared to be effective in discriminating sequences native to a specific fold amongst a set of decoys. Conclusions Out of innumerable topological possibilities, only a finite number of specific packing motifs are actually realized in proteins. This small number of motifs could serve as a basis set in the construction of larger networks. Of these, the triplet clique exhibits distinct preference both in terms of composition and geometry.

  10. Mapping the distribution of packing topologies within protein interiors shows predominant preference for specific packing motifs.

    Science.gov (United States)

    Basu, Sankar; Bhattacharyya, Dhananjay; Banerjee, Rahul

    2011-05-24

    Mapping protein primary sequences to their three dimensional folds referred to as the 'second genetic code' remains an unsolved scientific problem. A crucial part of the problem concerns the geometrical specificity in side chain association leading to densely packed protein cores, a hallmark of correctly folded native structures. Thus, any model of packing within proteins should constitute an indispensable component of protein folding and design. In this study an attempt has been made to find, characterize and classify recurring patterns in the packing of side chain atoms within a protein which sustains its native fold. The interaction of side chain atoms within the protein core has been represented as a contact network based on the surface complementarity and overlap between associating side chain surfaces. Some network topologies definitely appear to be preferred and they have been termed 'packing motifs', analogous to super secondary structures in proteins. Study of the distribution of these motifs reveals the ubiquitous presence of typical smaller graphs, which appear to get linked or coalesce to give larger graphs, reminiscent of the nucleation-condensation model in protein folding. One such frequently occurring motif, also envisaged as the unit of clustering, the three residue clique was invariably found in regions of dense packing. Finally, topological measures based on surface contact networks appeared to be effective in discriminating sequences native to a specific fold amongst a set of decoys. Out of innumerable topological possibilities, only a finite number of specific packing motifs are actually realized in proteins. This small number of motifs could serve as a basis set in the construction of larger networks. Of these, the triplet clique exhibits distinct preference both in terms of composition and geometry.

  11. The generic geometry of helices and their close-packed structures

    DEFF Research Database (Denmark)

    Olsen, Kasper; Bohr, Jakob

    2010-01-01

    The formation of helices is an ubiquitous phenomenon for molecular structures whether they are biological, organic, or inorganic, in nature. Helical structures have geometrical constraints analogous to close packing of three-dimensional crystal structures. For helical packing the geometrical cons....... For double helices comparisons are made to the A,B, and Z forms of DNA. The helical geometry of the A form is nearly close-packed. The packing density for the B and Z form are found to be approximately equal to each other....

  12. Advanced Protein Crystallization Facility (APCF)

    Science.gov (United States)

    1998-01-01

    This section of the Life and Microgravity Spacelab (LMS) publication contains articles entitled: (1) Crystallization of EGFR-EGF; (2) Crystallization of Apocrustacyanin C1; (3) Crystallization and X-ray Analysis of 5S rRNA and the 5S rRNA Domain A; (4) Growth of Lysozyme Crystals at Low Nucleation Density; (5) Comparative Analysis of Aspartyl tRNA-synthetase and Thaumatin Crystals Grown on Earth and In Microgravity; (6) Lysosome Crystal Growth in the Advanced Protein Crystallization Facility Monitored via Mach-Zehnder Interferometry and CCD Video; (7) Analysis of Thaumatin Crystals Grown on Earth and in Microgravity; (8) Crystallization of the Nucleosome Core Particle; (9) Crystallization of Photosystem I; (10) Mechanism of Membrane Protein Crystal Growth: Bacteriorhodopsin-mixed Micelle Packing at the Consolution Boundary, Stabilized in Microgravity; (11) Crystallization in a Microgravity Environment of CcdB, a Protein Involved in the Control of Cell Death; and (12) Crystallization of Sulfolobus Solfataricus

  13. FROM THE PACKED TOWERS

    Directory of Open Access Journals (Sweden)

    Valderi D. Leite

    2013-01-01

    Full Text Available About 245 thousand tones of municipal solid w aste are collected daily in Brazil. Nearly 32 thousand tones of the collected amount are treated in sanitary landfill, which generates biogas and leachate as byproduct. The leachate resulting from sanitary landfill contains high concentration of carbonaceous and nitrogenized material. The crucial question is that the biodegradation of the carbonaceous material is difficult as long as the nitrogenized material is presen t in the form of ammoniacal nitrogen (NH 4 + , which compromises performance of biological tr eatment process. Therefore, a physical and chemical treatment of the leachate should be done before its biological treatment, especially for reduction of ammoniacal nitr ogen concentration and for propitiating the realization of application of biological treatment. The treatment of leachate requires specific consideration, which is not needed fo r other types of waste. In the specific case in this study, where ammoniacal nitrogen concentration was about 2,200 mgN L -1 and the BOD 5 /COD ratio was 0.3, the study of ammonia stripping process was performed. Ammonia stripping process was studied in pack ed towers of 35 L capacity each and the parameters investigated were pH, ratio of contact area/leach volume and the aeration time. One of the parameters that influenced most in efficiency of ammonia stripping process was pH of the leachate since it contributes in conversion of ammoniacal nitrogen from NH 4 + to NH 3 .

  14. Statistical mechanics of the lattice sphere packing problem.

    Science.gov (United States)

    Kallus, Yoav

    2013-06-01

    We present an efficient Monte Carlo method for the lattice sphere packing problem in d dimensions. We use this method to numerically discover de novo the densest lattice sphere packing in dimensions 9 through 20. Our method goes beyond previous methods, not only in exploring higher dimensions but also in shedding light on the statistical mechanics underlying the problem in question. We observe evidence of a phase transition in the thermodynamic limit d→∞. In the dimensions explored in the present work, the results are consistent with a first-order crystallization transition but leave open the possibility that a glass transition is manifested in higher dimensions.

  15. Valve stem and packing assembly

    Energy Technology Data Exchange (ETDEWEB)

    Wordin, J.J.

    1990-12-31

    A valve stem and packing assembly is provided in which a rotatable valve stem includes a first tractrix surface for sliding contact with a stem packing and also includes a second tractrix surface for sliding contact with a bonnet. Force is applied by means of a spring, gland flange, and gland on the stem packing so the stem packing seals to the valve stem and bonnet. This configuration serves to create and maintain a reliable seal between the stem packing and the valve stem. The bonnet includes a second complementary tractrix surface for contacting the second sliding tractrix surface, the combination serving as a journal bearing for the entire valve stem and packing assembly. The journal bearing so configured is known as a Schiele`s pivot. The Schiele`s pivot also serves to maintain proper alignment of the valve stem with respect to the bonnet. Vertical wear between the surfaces of the Schiele`s pivot is uniform at all points of contact between the second sliding tractrix surface and the second complementary tractrix surface of a bonnet. The valve stem is connected to a valve plug by means of a slip joint. The valve is opened and closed by rotating the valve stem. The slip joint compensates for wear on the Schiele`s pivot and on the valve plug. A ledge is provided on the valve bonnet for the retaining nut to bear against. The ledge prevents overtightening of the retaining nut and the resulting excessive friction between stem and stem packing.

  16. Importance of packing in spiral defect chaos

    Indian Academy of Sciences (India)

    Kapilanjan Krishna

    2008-04-01

    We develop two measures to characterize the geometry of patterns exhibited by the state of spiral defect chaos, a weakly turbulent regime of Rayleigh-Bénard convection. These describe the packing of contiguous stripes within the pattern by quantifying their length and nearest-neighbor distributions. The distributions evolve towards unique distribution with increasing Rayleigh number that suggests power-law scaling for the dynamics in the limit of infinite system size. The techniques are generally applicable to patterns that are reducible to a binary representation.

  17. Structural considerations on acridine/acridinium derivatives: Synthesis, crystal structure, Hirshfeld surface analysis and computational studies

    Science.gov (United States)

    Wera, Michał; Storoniak, Piotr; Serdiuk, Illia E.; Zadykowicz, Beata

    2016-02-01

    This article describes a detailed study of the molecular packing and intermolecular interactions in crystals of four derivatives of acridine, i.e. 9-methyl-, 9-ethyl, 9-bromomethyl- and 9-piperidineacridine (1, 2, 3 and 4, respectively) and three 10-methylacridinium salts containing the trifluoromethanesulphonate anion and 9-vinyl-, 9-bromomethyl, and 9-phenyl-10-methylacridinium cations (5, 6 and 7, respectively). The crystal structures of all of the compounds are stabilized by long-range electrostatic interactions, as well as by a network of short-range C-HṡṡṡO (in hydrates and salts 3 and 5-7, respectively), C-Hṡṡṡπ, π-π, C-Fṡṡṡπ and S-Oṡṡṡπ (in salts 5-7) interactions. Hirshfeld surface analysis shows that various intermolecular contacts play an important role in the crystal packing, graphically exhibiting the differences in spatial arrangements of the acridine/acridinium derivatives under scrutiny here. Additionally, computational methods have been used to compare the intermolecular interactions in the crystal structures of the investigated compounds. Computations have confirmed the great contribution of dispersive interactions for crystal lattice stability in the case of 9-substituted acridine and electrostatic interactions for the crystal lattice stability in the case of 9-substituted 10-methylacridinium trifluoromethanesulphonates. The value of crystal lattice energy and the electrostatic contribution in the crystal lattice energy of monohydrated acridine derivatives have confirmed that these compounds have behave as acridinium derivatives.

  18. Evolution of the dense packings of spherotetrahedral particles: from ideal tetrahedra to spheres.

    Science.gov (United States)

    Jin, Weiwei; Lu, Peng; Li, Shuixiang

    2015-10-22

    Particle shape plays a crucial role in determining packing characteristics. Real particles in nature usually have rounded corners. In this work, we systematically investigate the rounded corner effect on the dense packings of spherotetrahedral particles. The evolution of dense packing structure as the particle shape continuously deforms from a regular tetrahedron to a sphere is investigated, starting both from the regular tetrahedron and the sphere packings. The dimer crystal and the quasicrystal approximant are used as initial configurations, as well as the two densest sphere packing structures. We characterize the evolution of spherotetrahedron packings from the ideal tetrahedron (s = 0) to the sphere (s = 1) via a single roundness parameter s. The evolution can be partitioned into seven regions according to the shape variation of the packing unit cell. Interestingly, a peak of the packing density Φ is first observed at s ≈ 0.16 in the Φ-s curves where the tetrahedra have small rounded corners. The maximum density of the deformed quasicrystal approximant family (Φ ≈ 0.8763) is slightly larger than that of the deformed dimer crystal family (Φ ≈ 0.8704), and both of them exceed the densest known packing of ideal tetrahedra (Φ ≈ 0.8563).

  19. Compactness Theorems for Geometric Packings

    OpenAIRE

    Martin, Greg

    2000-01-01

    Moser asked whether the collection of rectangles of dimensions 1 x 1/2, 1/2 x 1/3, 1/3 x 1/4, ..., whose total area equals 1, can be packed into the unit square without overlap, and whether the collection of squares of side lengths 1/2, 1/3, 1/4, ... can be packed without overlap into a rectangle of area pi^2/6-1. Computational investigations have been made into packing these collections into squares of side length 1+epsilon and rectangles of area pi^2/6-1+epsilon, respectively, and one can c...

  20. Aspiration of Nasopore nasal packing.

    Science.gov (United States)

    Smith, Jonathan; Reddy, Ekambar

    2017-10-04

    We present a case of postoperative Nasopore aspiration in an otherwise fit and well 11-year-old. An endoscopic adenoidectomy had been performed without incident and Nasopore packing placed into each nasal cavity. Immediately after extubation, there was marked hypoxia, tachypnoea and high clinical suspicion of pack aspiration. The patient returned to theatre for emergency rigid bronchoscopy and retrieval of nasal packing. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  1. Solid-state 13C NMR study of banana liquid crystals - 3: Alkyl-tail-group packing environments of an acute-angle bent-core molecule in the hexagonal columnar and cubic phases

    Science.gov (United States)

    Kurosu, Hiromichi; Endo, Yumi; Kimura, Saori; Hashimoto, Tomoko; Harada, Motoi; Lee, Eun-Woo; Sone, Masato; Watanabe, Junji; Kang, Sungmin

    2016-02-01

    Solid-state 13C nuclear magnetic resonance (NMR) measurements were performed on the hexagonal columnar and cubic phases of an acute-angle banana-shaped molecule, N(1,7)-S30. In the hexagonal columnar phase, three peaks appear at the NMR chemical shifts assigned to the internal methylene carbons of alkyl tails, indicating that the two alkyl tails have different packing structures, and one of the tails has two different conformations within a single molecule. Combined cross-polarization/magic-angle spinning and pulse saturation transfer/magic-angle spinning measurements show that one of the alkyl chains is located inside and the other is located outside the columnar structure. In the cubic phase, pulse saturation transfer/magic-angle spinning measurement shows that only one peak appears at the NMR chemical shifts assigned to the internal methylene carbons of alkyl tails, indicating that both of the alkyl chains are located outside the cubic structure.

  2. Hard convex lens-shaped particles: Densest-known packings and phase behavior

    Energy Technology Data Exchange (ETDEWEB)

    Cinacchi, Giorgio, E-mail: giorgio.cinacchi@uam.es [Departamento de Física Teórica de la Materia Condensada, Instituto de Física de la Materia Condensada (IFIMAC), Instituto de Ciencias de Materiales “Nicolás Cabrera,” Universidad Autónoma de Madrid, Campus de Cantoblanco, E-28049 Madrid (Spain); Torquato, Salvatore, E-mail: torquato@princeton.edu [Department of Chemistry, Department of Physics, Institute for the Science and Technology of Materials, Program for Applied and Computational Mathematics, Princeton University, Princeton, New Jersey 08544 (United States)

    2015-12-14

    By using theoretical methods and Monte Carlo simulations, this work investigates dense ordered packings and equilibrium phase behavior (from the low-density isotropic fluid regime to the high-density crystalline solid regime) of monodisperse systems of hard convex lens-shaped particles as defined by the volume common to two intersecting congruent spheres. We show that, while the overall similarity of their shape to that of hard oblate ellipsoids is reflected in a qualitatively similar phase diagram, differences are more pronounced in the high-density crystal phase up to the densest-known packings determined here. In contrast to those non-(Bravais)-lattice two-particle basis crystals that are the densest-known packings of hard (oblate) ellipsoids, hard convex lens-shaped particles pack more densely in two types of degenerate crystalline structures: (i) non-(Bravais)-lattice two-particle basis body-centered-orthorhombic-like crystals and (ii) (Bravais) lattice monoclinic crystals. By stacking at will, regularly or irregularly, laminae of these two crystals, infinitely degenerate, generally non-periodic in the stacking direction, dense packings can be constructed that are consistent with recent organizing principles. While deferring the assessment of which of these dense ordered structures is thermodynamically stable in the high-density crystalline solid regime, the degeneracy of their densest-known packings strongly suggests that colloidal convex lens-shaped particles could be better glass formers than colloidal spheres because of the additional rotational degrees of freedom.

  3. Domain Discretization and Circle Packings

    DEFF Research Database (Denmark)

    Dias, Kealey

    A circle packing is a configuration of circles which are tangent with one another in a prescribed pattern determined by a combinatorial triangulation, where the configuration fills a planar domain or a two-dimensional surface. The vertices in the triangulation correspond to centers of circles......, and edges correspond to two circles (having centers corresponding to the endpoints of the edge) being tangent to each other. This circle packing creates a rigid structure having an underlying geometric triangulation, where the centers of circles again correspond to vertices in the triangulation......, and the edges are geodesic segments (Euclidean, hyperbolic, or spherical) connecting centers of circles that are tangent to each other. Three circles that are mutually tangent form a face of the triangulation. Since circle packing is closely related to triangulation, circle packing methods can be applied...

  4. The pursuit of perfect packing

    CERN Document Server

    Weaire, Denis

    2008-01-01

    Coauthored by one of the creators of the most efficient space packing solution, the Weaire-Phelan structure, The Pursuit of Perfect Packing, Second Edition explores a problem of importance in physics, mathematics, chemistry, biology, and engineering: the packing of structures. Maintaining its mathematical core, this edition continues and revises some of the stories from its predecessor while adding several new examples and applications. The book focuses on both scientific and everyday problems ranging from atoms to honeycombs. It describes packing models, such as the Kepler conjecture, Voronoï decomposition, and Delaunay decomposition, as well as actual structure models, such as the Kelvin cell and the Weaire-Phelan structure. The authors discuss numerous historical aspects and provide biographical details on influential contributors to the field, including emails from Thomas Hales and Ken Brakke. With examples from physics, crystallography, engineering, and biology, this accessible and whimsical bo...

  5. Digital collections and exhibits

    CERN Document Server

    Denzer, Juan

    2015-01-01

    Today's libraries are taking advantage of cutting-edge technologies such as flat panel displays using touch, sound, and hands-free motions to design amazing exhibits using everything from simple computer hardware to advanced technologies such as the Microsoft Kinect. Libraries of all types are striving to add new interactive experiences for their patrons through exciting digital exhibits, both online and off. Digital Collections and Exhibits takes away the mystery of designing stunning digital exhibits to spotlight library trea

  6. Pattern formations and optimal packing.

    Science.gov (United States)

    Mityushev, Vladimir

    2016-04-01

    Patterns of different symmetries may arise after solution to reaction-diffusion equations. Hexagonal arrays, layers and their perturbations are observed in different models after numerical solution to the corresponding initial-boundary value problems. We demonstrate an intimate connection between pattern formations and optimal random packing on the plane. The main study is based on the following two points. First, the diffusive flux in reaction-diffusion systems is approximated by piecewise linear functions in the framework of structural approximations. This leads to a discrete network approximation of the considered continuous problem. Second, the discrete energy minimization yields optimal random packing of the domains (disks) in the representative cell. Therefore, the general problem of pattern formations based on the reaction-diffusion equations is reduced to the geometric problem of random packing. It is demonstrated that all random packings can be divided onto classes associated with classes of isomorphic graphs obtained from the Delaunay triangulation. The unique optimal solution is constructed in each class of the random packings. If the number of disks per representative cell is finite, the number of classes of isomorphic graphs, hence, the number of optimal packings is also finite.

  7. Etruscan Culture Exhibition

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    EARLY this year an exhibition on the ancient civilization of Etruria was held at the Beijing-based China Millennium Monument.The theme of the exhibition was Etruscan Culture and on show were the most representative cultural and historical relics of this ancient civilization unearthed in the past 20 years. The 349 exhibits from various

  8. Ethics on Exhibit

    Science.gov (United States)

    Vick, Randy M.

    2011-01-01

    This article discusses ethical questions raised by an exhibition of work by an artist with a history of mental illness and the exhibition's relevance to art therapy and “outsider art” discourse on the subject. Considerations for how such an exhibit could be handled had the circumstances included an art therapist and art therapy client are…

  9. Colloidal cholesteric liquid crystal in spherical confinement

    Science.gov (United States)

    Li, Yunfeng; Jun-Yan Suen, Jeffrey; Prince, Elisabeth; Larin, Egor M.; Klinkova, Anna; Thérien-Aubin, Héloïse; Zhu, Shoujun; Yang, Bai; Helmy, Amr S.; Lavrentovich, Oleg D.; Kumacheva, Eugenia

    2016-08-01

    The organization of nanoparticles in constrained geometries is an area of fundamental and practical importance. Spherical confinement of nanocolloids leads to new modes of packing, self-assembly, phase separation and relaxation of colloidal liquids; however, it remains an unexplored area of research for colloidal liquid crystals. Here we report the organization of cholesteric liquid crystal formed by nanorods in spherical droplets. For cholesteric suspensions of cellulose nanocrystals, with progressive confinement, we observe phase separation into a micrometer-size isotropic droplet core and a cholesteric shell formed by concentric nanocrystal layers. Further confinement results in a transition to a bipolar planar cholesteric morphology. The distribution of polymer, metal, carbon or metal oxide nanoparticles in the droplets is governed by the nanoparticle size and yields cholesteric droplets exhibiting fluorescence, plasmonic properties and magnetic actuation. This work advances our understanding of how the interplay of order, confinement and topological defects affects the morphology of soft matter.

  10. The influence of the stereochemistry of alanine residue on the solid state conformation and crystal packing of opioid peptides containing D-Ala or L-Ala in message domain--XRD and NMR study.

    Science.gov (United States)

    Trzeciak-Karlikowska, Katarzyna; Bujacz, Anna; Ciesielski, Włodzimierz; Bujacz, Grzegorz D; Potrzebowski, Marek J

    2011-08-18

    In this work, an X-ray diffraction (XRD) and solid state NMR study of two tetrapeptides with different stereochemistry of alanine residue is presented using Tyr-(D-Ala)-Phe-Gly (1), an N-terminal sequence of opioid peptide dermorphin, and its biologically inactive analog Tyr-(L-Ala)-Phe-Gly (2). Single-crystal XRD proved that 1 crystallized under different conditions from exclusively one structure: a monoclinic crystal with P2(1) space group. In contrast, 2 very easily formed at least three crystallographic modifications, 2a (monoclinic P2(1)), 2b (orthorhombic P2(1)2(1)2) and 2c (tetragonal P4(1)2(1)2). Solid-state NMR spectroscopy was employed to investigate the structure and molecular dynamics of 1, 2a, and 2b. By employing different NMR experiments (dipolar dephasing and PILGRIM) and an analysis of the (13)C principal elements of the chemical shift tensor (CST), it was proven that the main skeleton of tetrapeptides is rigid, whereas significant differences in the molecular motion of the aromatic residues were observed. Comparing current data with those of previous studies (J. Phys. Chem. B2004, 108, 4535-4545 and Cryst. Growth Des. 2009, 9, 4050-4059), it can be assumed that an important preorganization mechanism anticipating the formation of peptide crystals containing D-Ala in sequence is the intramolecular CH-π interaction, which occurs for the amino acid with D stereochemistry. This effect may be responsible for the formation of only one crystallographic form of D-Ala peptides.

  11. Mixed crystal organic scintillators

    Science.gov (United States)

    Zaitseva, Natalia P; Carman, M Leslie; Glenn, Andrew M; Hamel, Sebastien; Hatarik, Robert; Payne, Stephen A; Stoeffl, Wolfgang

    2014-09-16

    A mixed organic crystal according to one embodiment includes a single mixed crystal having two compounds with different bandgap energies, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source, wherein the signal response signature does not include a significantly-delayed luminescence characteristic of neutrons interacting with the organic crystal relative to a luminescence characteristic of gamma rays interacting with the organic crystal. According to one embodiment, an organic crystal includes bibenzyl and stilbene or a stilbene derivative, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source.

  12. Optical anisotropy in packed isotropic spherical particles: indication of nanometer scale anisotropy in packing structure.

    Science.gov (United States)

    Yamaguchi, Kohei; Inasawa, Susumu; Yamaguchi, Yukio

    2013-02-28

    We investigated the origin of birefringence in colloidal films of spherical silica particles. Although each particle is optically isotropic in shape, colloidal films formed by drop drying demonstrated birefringence. While periodic particle structures were observed in silica colloidal films, no regular pattern was found in blended films of silica and latex particles. However, since both films showed birefringence, regular film structure patterns were not required to exhibit birefringence. Instead, we propose that nanometer-scale film structure anisotropy causes birefringence. Due to capillary flow from the center to the edge of a cast suspension, particles are more tightly packed in the radial direction. Directional packing results in nanometer-scale anisotropy. The difference in the interparticle distance between radial and circumferential axes was estimated to be 10 nm at most. Nanometer-scale anisotropy in colloidal films and the subsequent optical properties are discussed.

  13. Random close packing revisited: ways to pack frictionless disks.

    Science.gov (United States)

    Xu, Ning; Blawzdziewicz, Jerzy; O'Hern, Corey S

    2005-06-01

    We create collectively jammed (CJ) packings of 50-50 bidisperse mixtures of smooth disks in two dimensions (2D) using an algorithm in which we successively compress or expand soft particles and minimize the total energy at each step until the particles are just at contact. We focus on small systems in 2D and thus are able to find nearly all of the collectively jammed states at each system size. We decompose the probability P(phi) for obtaining a collectively jammed state at a particular packing fraction phi into two composite functions: (1) the density of CJ packing fractions rho(phi), which only depends on geometry, and (2) the frequency distribution beta(phi), which depends on the particular algorithm used to create them. We find that the function rho(phi) is sharply peaked and that beta(phi) depends exponentially on phi. We predict that in the infinite-system-size limit the behavior of P(phi) in these systems is controlled by the density of CJ packing fractions--not the frequency distribution. These results suggest that the location of the peak in P(phi) when N --> infinity can be used as a protocol-independent definition of random close packing.

  14. Valve stem and packing assembly

    Energy Technology Data Exchange (ETDEWEB)

    Wordin, J.J.

    1991-09-03

    A valve stem and packing assembly is provided in which a rotatable valve stem includes a first tractrix surface for sliding contact with a stem packing and also includes a second tractrix surface for sliding contact with a bonnet. Force is applied by means of a spring, gland flange, and gland on the stem packing so the stem packing seals to the valve stem and bonnet. This configuration serves to create and maintain a reliable seal between the stem packing and the valve stem. The bonnet includes a second complementary tractrix surface for contacting the second sliding tractrix surface, the combination serving as a journal bearing for the entire valve stem and packing assembly. The journal bearing so configured is known as a Schiele's pivot. The Schiele's pivot also serves to maintain proper alignment of the valve stem with respect to the bonnet. Vertical wear between the surfaces of the Schiele's pivot is uniform at all points of contact between the second sliding tractrix surface and the second complementary tractrix surface of a bonnet. The valve stem is connected to a valve plug by means of a slip joint. The valve is opened and closed by rotating the valve stem. The slip joint compensates for wear on the Schiele's pivot and on the valve plug. A ledge is provided on the valve bonnet for the retaining nut to bear against. The ledge prevents over tightening of the retaining nut and the resulting excessive friction between stem and stem packing. 2 figures.

  15. Valve stem and packing assembly

    Energy Technology Data Exchange (ETDEWEB)

    Wordin, John J. (Bingham County, ID)

    1991-01-01

    A valve stem and packing assembly is provided in which a rotatable valve stem includes a first tractrix surface for sliding contact with a stem packing and also includes a second tractrix surface for sliding contact with a bonnet. Force is applied by means of a spring, gland flange, and gland on the stem packing so the stem packing seals to the valve stem and bonnet. This configuration serves to create and maintain a reliable seal between the stem packing and the valve stem. The bonnet includes a second complementary tractrix surface for contacting the second sliding tractrix surface, the combination serving as a journal bearing for the entire valve stem and packing assembly. The journal bearing so configured is known as a Schiele's pivot. The Schiele's pivot also serves to maintain proper alignment of the valve stem with respect to the bonnet. Vertical wear between the surfaces of the Schiele's pivot is uniform at all points of contact between the second sliding tractrix surface and the second complementary tractrix surface of a bonnet. The valve stem is connected to a valve plug by means of a slip joint. The valve is opened and closed by rotating the valve stem. The slip joint compensates for wear on the Schiele's pivot and on the valve plug. A ledge is provided on the valve bonnet for the retaining nut to bear against. The ledge prevents overtightening of the retaining nut and the resulting excessive friction between stem and stem packing.

  16. Valve stem and packing assembly

    Energy Technology Data Exchange (ETDEWEB)

    Wordin, J.J.

    1990-01-01

    A valve stem and packing assembly is provided in which a rotatable valve stem includes a first tractrix surface for sliding contact with a stem packing and also includes a second tractrix surface for sliding contact with a bonnet. Force is applied by means of a spring, gland flange, and gland on the stem packing so the stem packing seals to the valve stem and bonnet. This configuration serves to create and maintain a reliable seal between the stem packing and the valve stem. The bonnet includes a second complementary tractrix surface for contacting the second sliding tractrix surface, the combination serving as a journal bearing for the entire valve stem and packing assembly. The journal bearing so configured is known as a Schiele's pivot. The Schiele's pivot also serves to maintain proper alignment of the valve stem with respect to the bonnet. Vertical wear between the surfaces of the Schiele's pivot is uniform at all points of contact between the second sliding tractrix surface and the second complementary tractrix surface of a bonnet. The valve stem is connected to a valve plug by means of a slip joint. The valve is opened and closed by rotating the valve stem. The slip joint compensates for wear on the Schiele's pivot and on the valve plug. A ledge is provided on the valve bonnet for the retaining nut to bear against. The ledge prevents overtightening of the retaining nut and the resulting excessive friction between stem and stem packing.

  17. 7 CFR 51.310 - Packing requirements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing requirements. 51.310 Section 51.310... STANDARDS) United States Standards for Grades of Apples Packing Requirements § 51.310 Packing requirements... the contents. (e) Tolerances: In order to allow for variations incident to proper packing, not...

  18. 7 CFR 51.1270 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 51.1270 Section 51.1270 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Summer and Fall Pears 1 Standard Pack § 51.1270 Packing. (a) Each package shall be packed...

  19. 7 CFR 51.1311 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 51.1311 Section 51.1311 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Winter Pears 1 Standard Pack § 51.1311 Packing. (a) Each package shall be packed so that...

  20. Molecular packing in bone collagen fibrils prior to mineralization

    Science.gov (United States)

    Hsiao, Benjamin; Zhou, Hong-Wen; Burger, Christian; Chu, Benjamin; Glimcher, Melvin J.

    2012-02-01

    The three-dimensional packing of collagen molecules in bone collagen fibrils has been largely unknown because even in moderately mineralized bone tissues, the organic matrix structure is severely perturbed by the deposition of mineral crystals. During the past decades, the structure of tendon collagen (e.g. rat tail) --- a tissue that cannot mineralize in vivo, has been assumed to be representative for bone collagen fibrils. Small-angle X-ray diffraction analysis of the native, uncalcified intramuscular fish bone has revealed a new molecular packing scheme, significantly different from the quasi-hexagonal arrangement often found in tendons. The deduced structure in bone collagen fibrils indicates the presence of spatially discrete microfibrils, and an arrangement of intrafibrillar space to form ``channels'', which could accommodate crystals with dimensions typically found in bone apatite.

  1. Packing of crystalline structures of binary hard spheres: an analytical approach and application to amorphization.

    Science.gov (United States)

    Brouwers, H J H

    2007-10-01

    The geometrical stability of the three lattices of the cubic crystal system, viz. face-centered cubic (fcc), body-centered cubic (bcc), and simple cubic (sc), consisting of bimodal discrete hard spheres, and the transition to amorphous packing is studied. First, the random close packing (rcp) fraction of binary mixtures of amorphously packed spheres is recapitulated. Next, the packing of a binary mixture of hard spheres in randomly disordered cubic structures is analyzed, resulting in original analytical expressions for the unit cell volume and the packing fraction, and which are also valid for the other five crystal systems. The bimodal fcc lattice parameter appears to be in close agreement with empirical hard sphere data from literature, and this parameter could be used to distinguish the size mismatch effect from all other effects in distorted binary lattices of materials. Here, as a first model application, bimodal amorphous and crystalline fcc/bcc packing fractions are combined, yielding the optimum packing configuration, which depends on mixture composition and diameter ratio only. Maps of the closest packing mode are established and applied to colloidal mixtures of polydisperse spheres and to binary alloys of bcc, fcc, and hcp metals. The extensive comparison between the analytical expressions derived here and the published numerical and empirical data yields good agreement. Hence, it is seen that basic space-filling theories on "simple" noninteracting hard spheres are a valuable tool for the study of crystalline materials.

  2. Packing of crystalline structures of binary hard spheres: An analytical approach and application to amorphization

    Science.gov (United States)

    Brouwers, H. J. H.

    2007-10-01

    The geometrical stability of the three lattices of the cubic crystal system, viz. face-centered cubic (fcc), body-centered cubic (bcc), and simple cubic (sc), consisting of bimodal discrete hard spheres, and the transition to amorphous packing is studied. First, the random close packing (rcp) fraction of binary mixtures of amorphously packed spheres is recapitulated. Next, the packing of a binary mixture of hard spheres in randomly disordered cubic structures is analyzed, resulting in original analytical expressions for the unit cell volume and the packing fraction, and which are also valid for the other five crystal systems. The bimodal fcc lattice parameter appears to be in close agreement with empirical hard sphere data from literature, and this parameter could be used to distinguish the size mismatch effect from all other effects in distorted binary lattices of materials. Here, as a first model application, bimodal amorphous and crystalline fcc/bcc packing fractions are combined, yielding the optimum packing configuration, which depends on mixture composition and diameter ratio only. Maps of the closest packing mode are established and applied to colloidal mixtures of polydisperse spheres and to binary alloys of bcc, fcc, and hcp metals. The extensive comparison between the analytical expressions derived here and the published numerical and empirical data yields good agreement. Hence, it is seen that basic space-filling theories on “simple” noninteracting hard spheres are a valuable tool for the study of crystalline materials.

  3. Exhibiting Mozart: Rethinking Biography

    OpenAIRE

    Spring, Ulrike

    2010-01-01

    Abstract: The article analyses the new permanent exhibition in the composer Wolfgang A. Mozart’s apartment in Vienna, opened in 2006, from the curator’s perspective. The exhibition presents an approach to biographical display in which the exhibited person becomes part of a multifaceted web of contexts, and the article argues for the active deployment of the polysemic character of objects as a means of grasping the complexity of a person’s biography. Presenting a concept for the...

  4. Deterministic indexing for packed strings

    DEFF Research Database (Denmark)

    Bille, Philip; Gørtz, Inge Li; Skjoldjensen, Frederik Rye

    2017-01-01

    Given a string S of length n, the classic string indexing problem is to preprocess S into a compact data structure that supports efficient subsequent pattern queries. In the deterministic variant the goal is to solve the string indexing problem without any randomization (at preprocessing time...... or query time). In the packed variant the strings are stored with several character in a single word, giving us the opportunity to read multiple characters simultaneously. Our main result is a new string index in the deterministic and packed setting. Given a packed string S of length n over an alphabet σ......, we show how to preprocess S in O(n) (deterministic) time and space O(n) such that given a packed pattern string of length m we can support queries in (deterministic) time O (m/α + log m + log log σ), where α = w/log σ is the number of characters packed in a word of size w = θ(log n). Our query time...

  5. Hard sphere packings within cylinders.

    Science.gov (United States)

    Fu, Lin; Steinhardt, William; Zhao, Hao; Socolar, Joshua E S; Charbonneau, Patrick

    2016-03-07

    Arrangements of identical hard spheres confined to a cylinder with hard walls have been used to model experimental systems, such as fullerenes in nanotubes and colloidal wire assembly. Finding the densest configurations, called close packings, of hard spheres of diameter σ in a cylinder of diameter D is a purely geometric problem that grows increasingly complex as D/σ increases, and little is thus known about the regime for D > 2.873σ. In this work, we extend the identification of close packings up to D = 4.00σ by adapting Torquato-Jiao's adaptive-shrinking-cell formulation and sequential-linear-programming (SLP) technique. We identify 17 new structures, almost all of them chiral. Beyond D ≈ 2.85σ, most of the structures consist of an outer shell and an inner core that compete for being close packed. In some cases, the shell adopts its own maximum density configuration, and the stacking of core spheres within it is quasiperiodic. In other cases, an interplay between the two components is observed, which may result in simple periodic structures. In yet other cases, the very distinction between the core and shell vanishes, resulting in more exotic packing geometries, including some that are three-dimensional extensions of structures obtained from packing hard disks in a circle.

  6. Crystals of phospholipase A2 inhibitor. The non-toxic component of vipoxin from the venom of Bulgarian viper (Vipera ammodytes).

    Science.gov (United States)

    Devedjiev, Y; Atanasov, B; Mancheva, I; Aleksiev, B

    1993-02-20

    Phospholipase A2 inhibitor, the non-toxic, acidic component of vipoxin from the venom of Bulgarian viper (Vipera ammodytes), has been crystallized. The tetragonal crystals obtained, exhibit the symmetry of space group P4(1)22 (or 4(3)22) with unit cell dimensions a = b = 59.9 A; c = 141.1 A; alpha = beta = gamma = 90 degrees. For two molecules per asymmetric unit, this would give Vm = 2.3 A3/Da, indicating normal packing. The crystals diffract to 2.5 A and a native data set to 3.2 A resolution has been collected.

  7. Dealing with Nonregular Shapes Packing

    Directory of Open Access Journals (Sweden)

    Bonfim Amaro Júnior

    2014-01-01

    Full Text Available This paper addresses the irregular strip packing problem, a particular two-dimensional cutting and packing problem in which convex/nonconvex shapes (polygons have to be packed onto a single rectangular object. We propose an approach that prescribes the integration of a metaheuristic engine (i.e., genetic algorithm and a placement rule (i.e., greedy bottom-left. Moreover, a shrinking algorithm is encapsulated into the metaheuristic engine to improve good quality solutions. To accomplish this task, we propose a no-fit polygon based heuristic that shifts polygons closer to each other. Computational experiments performed on standard benchmark problems, as well as practical case studies developed in the ambit of a large textile industry, are also reported and discussed here in order to testify the potentialities of proposed approach.

  8. Planet Packing in Circumbinary Systems

    CERN Document Server

    Kratter, Kaitlin M

    2013-01-01

    The recent discovery of planets orbiting main sequence binaries will provide crucial constraints for theories of binary and planet formation. The formation pathway for these planets is complicated by uncertainties in the formation mechanism of the host stars. In this paper, we compare the dynamical states of single and binary star planetary systems. Specifically, we pose two questions: (1) What does it mean for a circumbinary system to be dynamically packed? (2) How many systems are required to differentiate between a population of packed or sparse planets? We determine when circumbinary systems become dynamically unstable as a function of the separation between the host-stars and the inner planet, and the first and second planets. We show that these represent unique stability constraints compared to single-star systems. We find that although the existing Kepler data is insufficient to distinguish between a population of packed or sparse circumbinary systems, a more thorough study of circumbinary TTVs combine...

  9. Heuristics for Multidimensional Packing Problems

    DEFF Research Database (Denmark)

    Egeblad, Jens

    In this thesis we consider solution methods for packing problems. Packing problems occur in many different situations both directly in the industry and as sub-problems of other problems. High-quality solutions for problems in the industrial sector may be able to reduce transportation and production...... costs significantly. For packing problems in general are given a set of items and one of more containers. The items must be placed within the container such that some objective is optimized and the items do not overlap. Items and container may be rectangular or irregular (e.g. polygons and polyhedra......) and may be defined in any number of dimensions. Solution methods are based on theory from both computational geometry and operations research. The scientific contributions of this thesis are presented in the form of six papers and a section which introduces the many problem types and recent solution...

  10. A simple coordination complex exhibiting colour change on slight structural modification: Synthesis and crystal structures of violet and yellow forms of [NiII(opda)2(NCS)2] (opda = orthophenylenediamine)

    Indian Academy of Sciences (India)

    Sabbani Supriya; Samar K Das

    2010-09-01

    The violet-coloured compound [NiII(opda)2(NCS)2] (1) undergoes colour change to strawyellow colour retaining its molecular composition on standing over long period of time at room temperature in the solid state. Compound 1 (violet form) and its yellow-form [NiII(opda)2(NCS)2] (2) (opda = orthophenylenediammine) have been characterized by routine spectroscopic methods and single crystal X-ray diffraction analysis. Compound 1 crystallizes in monoclinic space group 21/ and its yellow form (compound 2) retains same space group. Their crystal structures show an intricate supramolecular network based on N-H$\\cdots$S hydrogen bonds, that involve amine and thiocyanate groups coordinated to nickel(II).

  11. Use of the Primitive Unit Cell in Understanding Subtle Features of the Cubic Closest-Packed Structure

    Science.gov (United States)

    Hawkins, John A.; Rittenhouse, Jeffrey L.; Soper, Linda M.; Rittenhouse, Robert C.

    2008-01-01

    One of the most important crystal structures adopted by metals is characterized by the "abcabc"...stacking of close-packed layers. This structure is commonly referred to in textbooks as the cubic close-packed (ccp) or face-centered cubic (fcc) structure, since the entire lattice can be generated by replication of a face-centered cubic unit cell…

  12. Cylinder valve packing nut studies

    Energy Technology Data Exchange (ETDEWEB)

    Blue, S.C. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

    1991-12-31

    The design, manufacture, and use of cylinder valve packing nuts have been studied to improve their resistance to failure from stress corrosion cracking. Stress frozen photoelastic models have been analyzed to measure the stress concentrations at observed points of failure. The load effects induced by assembly torque and thermal expansion of stem packing were observed by strain gaging nuts. The effects of finishing operations and heat treatment were studied by the strain gage hole boring and X-ray methods. Modifications of manufacturing and operation practices are reducing the frequency of stress corrosion failures.

  13. Multi-scale modeling and experimental study of twin inception and propagation in hexagonal close-packed materials using a crystal plasticity finite element approach; part II: Local behavior

    Science.gov (United States)

    Abdolvand, Hamidreza; Daymond, Mark R.

    2013-03-01

    In-situ tensile tests are performed on Zircaloy-2 samples with various grain sizes to study twin inception and propagation. Orientation maps of some areas at the surface are measured before and after deformation, using the Electron BackScattered Diffraction (EBSD) technique. Strain fields of the same areas are determined using the digital image correlation technique and are compared with results from Crystal Plasticity Finite Element (CPFE) simulations. Different assumptions are made within the CPFE code to simulate twin propagation. It is observed that the predictions of different models does not really change from one model to another when statistical information on the twins is compared, yet local predictions for each grain, i.e. twin direction, twin variant selection, and twin inception site, do change. Also, it is shown that the twin Schmid factor can vary drastically within grains and that for those grains with a low tendency for twinning this variation may make them susceptible to twinning.

  14. Effects of grain size distribution on the packing fraction and shear strength of frictionless disk packings

    Science.gov (United States)

    Estrada, Nicolas

    2016-12-01

    Using discrete element methods, the effects of the grain size distribution on the density and the shear strength of frictionless disk packings are analyzed. Specifically, two recent findings on the relationship between the system's grain size distribution and its rheology are revisited, and their validity is tested across a broader range of distributions than what has been used in previous studies. First, the effects of the distribution on the solid fraction are explored. It is found that the distribution that produces the densest packing is not the uniform distribution by volume fractions as suggested in a recent publication. In fact, the maximal packing fraction is obtained when the grading curve follows a power law with an exponent close to 0.5 as suggested by Fuller and Thompson in 1907 and 1919 [Trans Am. Soc. Civ. Eng. 59, 1 (1907) and A Treatise on Concrete, Plain and Reinforced (1919), respectively] while studying mixtures of cement and stone aggregates. Second, the effects of the distribution on the shear strength are analyzed. It is confirmed that these systems exhibit a small shear strength, even if composed of frictionless particles as has been shown recently in several works. It is also found that this shear strength is independent of the grain size distribution. This counterintuitive result has previously been shown for the uniform distribution by volume fractions. In this paper, it is shown that this observation keeps true for different shapes of the grain size distribution.

  15. Nonlinear model predictive control of a packed distillation column

    Energy Technology Data Exchange (ETDEWEB)

    Patwardhan, A.A.; Edgar, T.F. (Univ. of Texas, Austin, TX (United States). Dept. of Chemical Engineering)

    1993-10-01

    A rigorous dynamic model based on fundamental chemical engineering principles was formulated for a packed distillation column separating a mixture of cyclohexane and n-heptane. This model was simplified to a form suitable for use in on-line model predictive control calculations. A packed distillation column was operated at several operating conditions to estimate two unknown model parameters in the rigorous and simplified models. The actual column response to step changes in the feed rate, distillate rate, and reboiler duty agreed well with dynamic model predictions. One unusual characteristic observed was that the packed column exhibited gain-sign changes, which are very difficult to treat using conventional linear feedback control. Nonlinear model predictive control was used to control the distillation column at an operating condition where the process gain changed sign. An on-line, nonlinear model-based scheme was used to estimate unknown/time-varying model parameters.

  16. Singlet Fission in Rubrene Derivatives: Impact of Molecular Packing

    KAUST Repository

    Sutton, Christopher

    2017-03-13

    We examine the properties of six recently synthesized rubrene derivatives (with substitutions on the side phenyl rings) that show vastly different crystal structures. In order to understand how packing in the solid state affects the excited states and couplings relevant for singlet fission, the lowest excited singlet (S), triplet (T), multiexciton (TT), and charge-transfer (CT) states of the rubrene derivatives are compared to known singlet fission materials [tetracene, pentacene, 5,12-diphenyltetracene (DPT), and rubrene itself]. While a small difference of less than 0.2 eV is calculated for the S and TT energies, a range of 0.50 to 1.2 eV in the CT energies and nearly 3 orders of magnitude in the electronic couplings are computed for the rubrene derivatives in their crystalline packings, which strongly affects the role of the CT state in facilitating SF. To rationalize experimental observations of singlet fission occurring in amorphous phases of rubrene, DPT, and tetracene, we use molecular dynamics (MD) simulations to assess the impact of molecular packing and orientations and to gain a better understanding of the parameters that control singlet fission in amorphous films compared to crystalline packings. The MD simulations point to a crystalline-like packing for thin films of tetracene; on the other hand, DPT, rubrene, and the rubrene derivatives all show various degrees of disorder with a number of sites that have larger electronic couplings than in the crystal, which can facilitate singlet fission in such thin films. Our analysis underlines the potential of these materials as promising candidates for singlet fission and helps understand how various structural motifs affect the critical parameters that control the ability of a system to undergo singlet fission.

  17. Test Control Center exhibit

    Science.gov (United States)

    2000-01-01

    Have you ever wondered how the engineers at John C. Stennis Space Center in Hancock County, Miss., test fire a Space Shuttle Main Engine? The Test Control Center exhibit at StenniSphere can answer your questions by simulating the test firing of a Space Shuttle Main Engine. A recreation of one of NASA's test control centers, the exhibit explains and portrays the 'shake, rattle and roar' that happens during a real test firing.

  18. Pack cementation coatings for alloys

    Energy Technology Data Exchange (ETDEWEB)

    He, Yi-Rong; Zheng, Minhui; Rapp, R.A. [Ohio State Univ., Columbus, OH (United States)

    1996-08-01

    The halide-activated pack cementation process was modified to produce a Ge-doped silicide diffusion coating on a Cr-Cr{sub 2}Nb alloy in a single processing step. The morphology and composition of the coating depended both on the composition of the pack and on the composition and microstructure of the substrate. Higher Ge content in the pack suppressed the formation of CrSi{sub 2} and reduced the growth kinetics of the coating. Ge was not homogeneously distributed in the coatings. In cyclic and isothermal oxidation in air at 700 and 1050{degrees}C, the Ge-doped silicide coating protected the Cr-Nb alloys from significant oxidation by the formation of a Ge-doped silica film. The codeposition and diffusion of aluminum and chromium into low alloy steel have been achieved using elemental Al and Cr powders and a two-step pack cementation process. Sequential process treatments at 925{degrees}C and 1150{degrees}C yield dense and uniform ferrite coatings, whose compositions are close to either Fe{sub 3}Al or else FeAl plus a lower Cr content, when processed under different conditions. The higher content of Al in the coatings was predicted by thermodynamic calculations of equilibrium in the gas phase. The effect of the particle size of the metal powders on the surface composition of the coating has been studied for various combinations of Al and Cr powders.

  19. Wire and Packing Tape Sandwiches

    Science.gov (United States)

    Rabinowitz, Sandy

    2009-01-01

    In this article, the author describes how students can combine craft wire with clear packing tape to create a two-dimensional design that can be bent and twisted to create a three-dimensional form. Students sandwich wire designs between two layers of tape. (Contains 1 online resource.)

  20. Coking technology using packed coal mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Kuznichenko, V.M.; Shteinberg, Eh.A.; Tolstoi, A.P. (Khar' kovskii Nauchno-Issledovatel' skii Uglekhimicheskii Institut, Kharkov (Ukrainian SSR))

    1991-08-01

    Discusses coking of packed coal charges in the FRG, USSR, France, India, Poland and Czechoslovakia. The following aspects are evaluated: types of weakly caking coals that are used as components of packed mixtures, energy consumption of packing, effects of coal mixture packing on coke oven design, number of coke ovens in a battery, heating temperature, coking time, coke properties, investment and operating cost. Statistical data that characterize the Saarberg packing process used in the FRG are analyzed. Packing coal mixtures for coking improves coke quality and reduces environmental pollution. 4 refs.

  1. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...

  2. Packing hyperspheres in high-dimensional Euclidean spaces.

    Science.gov (United States)

    Skoge, Monica; Donev, Aleksandar; Stillinger, Frank H; Torquato, Salvatore

    2006-10-01

    We present a study of disordered jammed hard-sphere packings in four-, five-, and six-dimensional Euclidean spaces. Using a collision-driven packing generation algorithm, we obtain the first estimates for the packing fractions of the maximally random jammed (MRJ) states for space dimensions d=4, 5, and 6 to be phi(MRJ) approximately 0.46, 0.31, and 0.20, respectively. To a good approximation, the MRJ density obeys the scaling form phi(MRJ)=c1/2(d)+(c2d)/2d, where c1=-2.72 and c2=2.56, which appears to be consistent with the high-dimensional asymptotic limit, albeit with different coefficients. Calculations of the pair correlation function g2(r) and structure factor S(k) for these states show that short-range ordering appreciably decreases with increasing dimension, consistent with a recently proposed "decorrelation principle," which, among other things, states that unconstrained correlations diminish as the dimension increases and vanish entirely in the limit d-->infinity. As in three dimensions (where phi(MRJ) approximately 0.64), the packings show no signs of crystallization, are isostatic, and have a power-law divergence in g2(r) at contact with power-law exponent approximately 0.4. Across dimensions, the cumulative number of neighbors equals the kissing number of the conjectured densest packing close to where g2(r) has its first minimum. Additionally, we obtain estimates for the freezing and melting packing fractions for the equilibrium hard-sphere fluid-solid transition, phi(F) approximately 0.32 and phi(M) approximately 0.39, respectively, for d=4, and phi(F) approximately 0.20 and phi(M) approximately 0.25, respectively, for d=5. Although our results indicate the stable phase at high density is a crystalline solid, nucleation appears to be strongly suppressed with increasing dimension.

  3. EXHIBITION: Accelerated Particles

    CERN Multimedia

    2004-01-01

    An exhibition of plastic arts and two evenings of performances by sound and visual artists as part of CERN's 50th anniversary celebrations. Fifty candles for CERN, an international laboratory renowned for fundamental research, is a cause for celebration. Since March this year, Geneva and neighbouring parts of France have been the venues for a wealth of small and large-scale events, which will continue until November. Given CERN's location in the commune of Meyrin, the ForuMeyrin is hosting exhibitions of plastic arts and performances entitled: Accelerated Particles. Several works will be exhibited and performed in two 'salons'. Salon des matières: An exhibition of plastic arts From Tues 12 October to Wed 3 November 2004 Tuesdays to Fridays: 16:00 to 19:00 Saturdays: 14:00 to 18:00 Exhibition open late on performance nights, entrance free Salon des particules: Musical and visual performances Tues 12 and Mon 25 October from 20:00 to 23:00 Preview evening for both events: Tues 12 October from 18:...

  4. Council Chamber exhibition

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    To complete the revamp of CERN’s Council Chamber, a new exhibition is being installed just in time for the June Council meetings.   Panels will showcase highlights of CERN’s history, using some of the content prepared for the exhibitions marking 50 years of the PS, which were displayed in the main building last November. The previous photo exhibition in the Council Chamber stopped at the 1970s. To avoid the new panels becoming quickly out of date, photos are grouped together around specific infrastructures, rather than following a classic time-line. “We have put the focus on the accelerators – the world-class facilities that CERN has been offering researchers over the years, from the well-known large colliders to the lesser-known smaller facilities,” says Emma Sanders, who worked on the content. The new exhibition will be featured in a future issue of the Bulletin with photos and an interview with Fabienne Marcastel, designer of the exhibit...

  5. Hard, soft, and sticky spheres for dynamical studies of disordered colloidal packings

    Science.gov (United States)

    Gratale, Matthew Daniel

    This thesis describes experiments which explore the role of interparticle interactions as a means to alter, and control, the properties of dense colloidal packings. The first set of experiments studied phonon modes in two-dimensional colloidal crystals composed of soft microgel particles with hard polystyrene particle dopants distributed randomly on the triangular lattice. By mixing hard and soft spheres we obtain close-packed lattices of spheres with random bond strength disorder, textit{i.e.,} the effective springs coupling nearest-neighbors are either very stiff, very soft, or of intermediate stiffness. Video microscopy, particle tracking, and covariance matrix techniques are employed to derive the phonon modes of the corresponding ``shadow'' crystals, thereby enabling us to study how bond strength disorder affects vibrational properties. Hard and soft particles participate equally in low frequency phonon modes, and the samples exhibit Debye-like density of states behavior characteristic of crystals at low frequency. For mid- and high-frequency phonons, the relative participation of hard versus soft particles in each mode is found to vary systematically with dopant concentration. The second set of experiments investigated depletion interaction potentials between micron-size colloidal particles induced by nanometer-scale micelles composed of the surfactant hexaethylene glycol monododecyl ether (C12E6). The strength and range of the depletion interaction is revealed to arise from variations in shape anisotropy of the rod-like surfactant micelles. This shape anisotropy increases with increasing sample temperature. By fitting the colloidal interaction potentials to theoretical models, we extract the rod-like micelle length and shape anisotropy as a function of temperature. This work introduces micelle shape anisotropy as a means to control interparticle interactions in colloidal suspensions, and shows how interparticle depletion potentials of micron-scale objects

  6. Protein packing interactions and polymorphy of chorismate lyase from E. Coli

    Science.gov (United States)

    Gallagher, Travis

    2001-11-01

    The enzyme chorismate lyase from E. coli crystallizes into three well characterized polymorphs in identical conditions. The Wild-type enzyme tends to aggregate, even in the presence of a reducing agent, and yields monoclinic crystals that grow in intricate clusters. Protein aggregation was largely eliminated by mutating the protein's two cysteines to serines. The double mutant retains full enzymatic activity and grows singly in two new forms: triclinic and orthorhombic. The triclinic crystals diffract to 0.9 Å resolution. A single-cysteine mutant that crystallizes in the orthorhombic form was used to determine the structure, enabling examination of the packing interactions at 2.0 Å resolution or better in all three forms. A novel system for labeling contacts is proposed, and relations between packing patterns and crystal properties are discussed. Diffraction resolution is found to correlate with coordination number and with the root-mean-square deviation from mean extent of the contacts. Implications for contact energies are considered.

  7. Topological aspects of lanthanide-adipate-aqua compounds: Close packed and open framework structures

    Science.gov (United States)

    Chowdhuri, Durga Sankar; Kumar Jana, Swapan; Hazari, Debdoot; Zangrando, Ennio; Dalai, Sudipta

    2013-07-01

    A search in the Cambridge Structural Database (CSD) for lanthanide complexes with adipate [OOC(CH2)4COO]2- and aqua ligands retrieved a fair number of compounds. To this dataset a new lanthanum metal-organic framework, {[La2(adip)3(H2O)2] (1) (adipH2=adipic acid), synthesised and structurally characterized in these labs, was included. The crystal structures of these coordination polymers, of general formulation [Ln2(adip)3(H2O)x], exhibit a variety of topologies and dimensionality, which were clustered in different classes and described in detail. It was explored that the majority of these evidences the presence of metal chains or dinuclear Ln2 entities (separated in both cases by 4.0-4.8 Å), where lanthanide ions are differently connected by carboxylate groups with chelating or oxygen-bridging mode. The different amount of coordinated water molecules appear to affect the solid state networks. Moreover the crystal packing of these compounds shows peculiar aspects and examples were reported in the literature where the long alkyl chain of adipate connectors give rise to interpenetrated structures, or to porous material where lattice water or neutral larger molecules are clathrated.

  8. Exhibition in Sight

    Science.gov (United States)

    Wasserman, Burton

    1978-01-01

    Ludwig Mies van der Rohe is known primarily as an architect. However, he also designed chairs and tables. Discusses an exhibit held in New York City a few months ago which showed how well the famous architect achieved his goals in the area of furniture design. (Author/RK)

  9. Exhibitions in Sight

    Science.gov (United States)

    Wasserman, Burton

    1977-01-01

    Today, few artists make serving vessels on a monumental scale. Here artists compete in this unique area of specialization prompted by the Campbell Museum in Camden, New Jersey, which is dedicated to collecting and exhibiting the very best in soup tureens. (Author/RK)

  10. EXHIBITION: Accelerated Particles

    CERN Multimedia

    2004-01-01

    http://www.cern.ch/cern50/ An exhibition of plastic arts and two evenings of performances by sound and visual artists as part of CERN's fiftieth anniversary celebrations. The fiftieth anniversary of a world famous organization like CERN, an international laboratory specializing in fundamental research, is a cause for celebration. Since March this year, Geneva and neighbouring parts of France have been the venues for a wealth of small and large-scale events, which will continue until November. Given CERN's location in the commune of Meyrin, the ForuMeyrin is hosting two "salons" consisting of an exhibition of plastic arts and evenings of music and visual arts performances with the collective title of "Accelerated Particles". Several works will be exhibited and performed. Salon des matières: An exhibition of plastic arts Until Wednesday 3 November 2004. Tuesdays to Fridays: 4.00 p.m. to 7.00 p.m. Saturdays: 2.00 p.m. to 6.00 p.m. Doors open late on the evening of the performances. Salon des ...

  11. Fast Searching in Packed Strings

    DEFF Research Database (Denmark)

    Bille, Philip

    2009-01-01

    Given strings P and Q the (exact) string matching problem is to find all positions of substrings in Q matching P. The classical Knuth-Morris-Pratt algorithm [SIAM J. Comput., 1977] solves the string matching problem in linear time which is optimal if we can only read one character at the time....... However, most strings are stored in a computer in a packed representation with several characters in a single word, giving us the opportunity to read multiple characters simultaneously. In this paper we study the worst-case complexity of string matching on strings given in packed representation. Let m...... algorithm using time O(n/log(sigma) n + m + occ) Here occ is the number of occurrences of P in Q. For m = o(n) this improves the O(n) bound...

  12. Characteristics of fluidized-packed beds

    Science.gov (United States)

    Gabor, J. D.; Mecham, W. J.

    1968-01-01

    Study of fluidized-packed bed includes investigation of heat transfer, solids-gas mixing, and elutriation characteristics. A fluidized-packed bed is a system involving the fluidization of small particles in the voids of a packed bed of larger nonfluidized particles.

  13. Packing Superballs from Codes and Algebraic Curves

    Institute of Scientific and Technical Information of China (English)

    Li LIU; Chao Ping XING

    2008-01-01

    In the present paper, we make use of codes with good parameters and algebraic curves over finite fields with many rational points to construct dense packings of superballs. It turns out that our packing density is quite reasonable. In particular, we improve some values for the best-known lower bounds on packing density.

  14. Complications of balloon packing in epistaxis

    NARCIS (Netherlands)

    Vermeeren, Lenka; Derks, Wynia; Fokkens, Wytske; Menger, Dirk Jan

    2015-01-01

    Although balloon packing appears to be efficient to control epistaxis, severe local complications can occur. We describe four patients with local lesions after balloon packing. Prolonged balloon packing can cause damage to nasal mucosa, septum and alar skin (nasal mucosa, the cartilaginous skeleton

  15. 7 CFR 51.1527 - Standard pack.

    Science.gov (United States)

    2010-01-01

    ... package. The number of plums or prunes in California peach boxes or lug boxes shall not vary more than 4... Standards for Grades of Fresh Plums and Prunes Standard Pack § 51.1527 Standard pack. (a) Packing. (1) All... plums or prunes in the top layer of any package shall be reasonably representative in quality and...

  16. Random packing of colloids and granular matter

    NARCIS (Netherlands)

    Wouterse, A.

    2008-01-01

    This thesis deals with the random packing of colloids and granular matter. A random packing is a stable disordered collection of touching particles, without long-range positional and orientational order. Experimental random packings of particles with the same shape but made of different materials sh

  17. Packing defects into ordered structures

    DEFF Research Database (Denmark)

    Bechstein, R.; Kristoffersen, Henrik Høgh; Vilhelmsen, L.B.

    2012-01-01

    We have studied vicinal TiO2(110) surfaces by high-resolution scanning tunneling microscopy and density functional theory calculations. On TiO2 surfaces characterized by a high density of ⟨11̅ 1⟩ steps, scanning tunneling microscopy reveals a high density of oxygen-deficient strandlike adstructur...... because building material is available at step sites. The strands on TiO2(110) represent point defects that are densely packed into ordered adstructures....

  18. Structure of crystals of hard colloidal spheres

    Energy Technology Data Exchange (ETDEWEB)

    Pusey, P.N.; van Megen, W.; Bartlett, P.; Ackerson, B.J.; Rarity, J.G.; Underwood, S.M. (Royal Signals and Radar Establishment, Malvern, WR14 3PS, United Kingsom (GB) Department of Applied Physics, Royal Melbourne Institute of Technology, Melbourne, Victoria, Australia School of Chemistry, Bristol University, Bristol, BS8 1TS, United Kingdom Department of Physics, Oklahoma State University, Stillwater, Oklahoma 74078)

    1989-12-18

    We report light-scattering measurements of powder diffraction patterns of crystals of essentially hard colloidal spheres. These are consistent with structures formed by stacking close-packed planes of particles in a sequence of permitted lateral positions, {ital A},{ital B},{ital C}, which shows a high degree of randomness. Crystals grown slowly, while still containing many stacking faults, show a tendency towards face-centered-cubic packing: possible explanations for this observation are discussed.

  19. Vibrational Collapse of Hexapod Packings

    Science.gov (United States)

    Zhao, Yuchen; Ding, Jingqiu; Barés, Jonathan; Dierichs, Karola; Behringer, Robert

    2016-11-01

    Columns made of convex noncohesive grains like sand collapse after being released from a confining container. However, structures built from concave grains can be stable without external support. Previous research show that the stability of the columns depends on column diameter and height, by observing column stability after carefully lifting their confinement tubes. Thinner and taller columns collapse with higher probability. While the column stability weakly depends on packing density, it strongly depends on inter-particle friction. Experiments that cause the column to collapse also reveal similar trends, as more effort (such as heavier loading or shearing) is required to destabilize columns that are intrinsically more stable. In the current experiments, we invesitage the effect of vibration on destructing a column. Short columns collapse following the relaxation dynamics of disorder systems, which coincides with similar experiments on staple packings. However, tall columns collapse faster at the beginning, in addition to the relaxation process coming after. Using high-speed imaging, we analyze column collapse data from different column geometries. Ongoing work is focusing on characterizing the stability of hexapod packings to vibration. We thanks NSF-DMR-1206351 and the William M. Keck Foundation.

  20. Towards optimal packed string matching

    DEFF Research Database (Denmark)

    Ben-Kiki, Oren; Bille, Philip; Breslauer, Dany

    2014-01-01

    In the packed string matching problem, it is assumed that each machine word can accommodate up to α characters, thus an n-character string occupies n/α memory words.(a) We extend the Crochemore–Perrin constant-space O(n)-time string-matching algorithm to run in optimal O(n/α) time and even in real......-time, achieving a factor α speedup over traditional algorithms that examine each character individually. Our macro-level algorithm only uses the standard AC0 instructions of the word-RAM model (i.e. no integer multiplication) plus two specialized micro-level AC0 word-size packed-string instructions. The main word...... matching work.(b) We also consider the complexity of the packed string matching problem in the classical word-RAM model in the absence of the specialized micro-level instructions wssm and wslm. We propose micro-level algorithms for the theoretically efficient emulation using parallel algorithms techniques...

  1. Diffusion in Jammed Particle Packs.

    Science.gov (United States)

    Bolintineanu, Dan S; Grest, Gary S; Lechman, Jeremy B; Silbert, Leonardo E

    2015-08-21

    Using random walk simulations we explore diffusive transport through monodisperse sphere packings over a range of packing fractions ϕ in the vicinity of the jamming transition at ϕ(c). Various diffusion properties are computed over several orders of magnitude in both time and packing pressure. Two well-separated regimes of normal "Fickian" diffusion, where the mean squared displacement is linear in time, are observed. The first corresponds to diffusion inside individual spheres, while the latter is the long-time bulk diffusion. The intermediate anomalous diffusion regime and the long-time value of the diffusion coefficient are both shown to be controlled by particle contacts, which in turn depend on proximity to ϕ(c). The time required to recover normal diffusion t* scales as (ϕ-ϕ(c))(-0.5) and the long-time diffusivity D(∞)∼(ϕ-ϕ(c))0.5, or D(∞)∼1/t*. It is shown that the distribution of mean first passage times associated with the escape of random walkers between neighboring particles controls both t* and D(∞) in the limit ϕ→ϕ(c).

  2. CERN permanent exhibitions

    CERN Multimedia

    2016-01-01

    Explore by yourself the issues CERN's physicists are trying to solve: given that the entire universe is made of particles, where do they come from? Why do they behave in the way they do? Discover the massive apparatus used by physicists at CERN, like the LHC, and see how each part works. And if you have more time on site, follow the LHC circuit at ground level to understand in situ this giant machine. Enter our exhibitions. Welcome!

  3. Droplet Lamp Design exhibition

    OpenAIRE

    Unver, Ertu; Dean, Lionel Theodore

    2011-01-01

    This paper describes experiments in the use of digital fluid simulation techniques within a\\ud product design context. It discusses the adoption and adaptation of virtual modelling tools in\\ud 3D creative practice. This work is exhibited at EuroMold, the world-wide fair in Germany for\\ud mold making, tooling, design and application development with around 60.000 visitors and lasts\\ud 4 days. The fair brings together professionals from design, prototyping and manufacturing.

  4. Photochromism of mixed crystals containing bisthienyl-, bisthiazolyl-, and bisoxazolylethene derivatives.

    Science.gov (United States)

    Takami, Shizuka; Kuroki, Lumi; Irie, Masahiro

    2007-06-13

    Single crystals composed of two or three different kinds of diarylethenes, having similar geometrical structures but different colors in the closed-ring isomers, 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (1a), 1,2-bis(5-methyl-2-phenyl- 4-thiazolyl)perfluorocyclopentene (2a), and 1,2-bis(5-methyl-2-phenyl-4-oxazolyl)perfluorocyclopentene (3a) have been prepared in an attempt to form single crystals which exhibit different colors, depending on illumination wavelengths. When 1a and 2a are mixed in ethanol and the content of 2a in the feed is higher than that of 1a, only a needle-shaped crystal is obtained. The crystal shape is similar to that of 2a. On the other hand, high content of 1a in the feed leads to formation of a block-shaped crystal, of which the shape is similar to that of 1a. At a feed ratio of 1:1 for 1a and 2a, two types of crystals such as needle- and block-shapes are obtained from the same batch. Mixed crystals composed of three kinds of derivatives 1a/2a/3a have also been prepared. A crystal composed of the three derivatives in the molar ratio of 32 (1a):53 (2a):15 (3a) was obtained. X-ray analysis proved that 1a and 3a are packed in the crystal lattice of 2a. The mixed crystal 1a/2a/3a changed color from colorless to yellow, red, and blue upon irradiation with light of appropriate wavelengths.

  5. Upcycling CERN Exhibitions

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    Summer is coming - and with it, a new Microcosm exhibition showcasing CERN (see here). But while the new exhibit is preparing to enchant visitors, many have been asking about the site's former content. Will it simply be out with the old and in with the new? Not as such!   The plasma ball from Microcosm is now on display at the LHCb site. As Microcosm's new content is moving in, its old content is moving up. From LHCb to IdeaSquare, former Microcosm displays and objects are being installed across the CERN site. "Microcosm featured many elements that were well suited to life outside of the exhibition," says Emma Sanders, Microcosm project leader in the EDU group. "We didn't want this popular content to go to waste, and so set out to find them new homes across CERN." The LHCb experiment has received a number of Microcosm favourites, including the Rutherford experiment, the cosmic ray display and the Thomson experiment. "We&...

  6. Improved Online Square-into-Square Packing

    OpenAIRE

    Brubach, Brian

    2014-01-01

    In this paper, we show an improved bound and new algorithm for the online square-into-square packing problem. This two-dimensional packing problem involves packing an online sequence of squares into a unit square container without any two squares overlapping. The goal is to find the largest area $\\alpha$ such that any set of squares with total area $\\alpha$ can be packed. We show an algorithm that can pack any set of squares with total area $\\alpha \\leq 3/8$ into a unit square in an online se...

  7. Online Exhibits & Concept Maps

    Science.gov (United States)

    Douma, M.

    2009-12-01

    Presenting the complexity of geosciences to the public via the Internet poses a number of challenges. For example, utilizing various - and sometimes redundant - Web 2.0 tools can quickly devour limited time. Do you tweet? Do you write press releases? Do you create an exhibit or concept map? The presentation will provide participants with a context for utilizing Web 2.0 tools by briefly highlighting methods of online scientific communication across several dimensions. It will address issues of: * breadth and depth (e.g. from narrow topics to well-rounded views), * presentation methods (e.g. from text to multimedia, from momentary to enduring), * sources and audiences (e.g. for experts or for the public, content developed by producers to that developed by users), * content display (e.g. from linear to non-linear, from instructive to entertaining), * barriers to entry (e.g. from an incumbent advantage to neophyte accessible, from amateur to professional), * cost and reach (e.g. from cheap to expensive), and * impact (e.g. the amount learned, from anonymity to brand awareness). Against this backdrop, the presentation will provide an overview of two methods of online information dissemination, exhibits and concept maps, using the WebExhibits online museum (www.webexhibits.org) and SpicyNodes information visualization tool (www.spicynodes.org) as examples, with tips on how geoscientists can use either to communicate their science. Richly interactive online exhibits can serve to engage a large audience, appeal to visitors with multiple learning styles, prompt exploration and discovery, and present a topic’s breadth and depth. WebExhibits, which was among the first online museums, delivers interactive information, virtual experiments, and hands-on activities to the public. While large, multidisciplinary exhibits on topics like “Color Vision and Art” or “Calendars Through the Ages” require teams of scholars, user interface experts, professional writers and editors

  8. Adhesive loose packings of small dry particles

    Science.gov (United States)

    Liu, Wenwei; Li, Shuiqing; Baule, Adrian; Makse, Hernán A.

    We explore adhesive loose packings of dry small spherical particles of micrometer size using 3D discrete-element simulations with adhesive contact mechanics. A dimensionless adhesion parameter ($Ad$) successfully combines the effects of particle velocities, sizes and the work of adhesion, identifying a universal regime of adhesive packings for $Ad>1$. The structural properties of the packings in this regime are well described by an ensemble approach based on a coarse-grained volume function that includes correlations between bulk and contact spheres. Our theoretical and numerical results predict: (i) An equation of state for adhesive loose packings that appears as a continuation from the frictionless random close packing (RCP) point in the jamming phase diagram; (ii) The existence of a maximal loose packing point at the coordination number $Z=2$ and packing fraction $\\phi=1/2^{3}$. Our results highlight that adhesion leads to a universal packing regime at packing fractions much smaller than the random loose packing, which can be described within a statistical mechanical framework. We present a general phase diagram of jammed matter comprising frictionless, frictional, adhesive as well as non-spherical particles, providing a classification of packings in terms of their continuation from the spherical frictionless RCP.

  9. Modelling and comparison studies of packed screen regenerators for active magnetocaloric refrigeration

    DEFF Research Database (Denmark)

    Lei, Tian; Engelbrecht, Kurt; Nielsen, K. K.

    2011-01-01

    such as relatively large pressure drop and almost fixed porosity make loss reductions and further optimization challenging. This paper proposes and focuses on packed screen regenerators, which may exhibit lower pressure drop and equivalent heat transfer performance to packed sphere regenerators. A 1D AMR model......In active magnetic regeneration (AMR) systems, not only the magnetocaloric properties of materials, but also the regenerator geometry plays an important role in the system performance. Packed sphere regenerators are often employed in existing prototypes, however, the characteristics...... is improved and applied to simulate the regenerators. The performance of the new regenerators is studied and compared with that of the packed sphere regenerators. Possible fabrication methods of the packed screen regenerators are also discussed....

  10. Space Shuttle Cockpit exhibit

    Science.gov (United States)

    2000-01-01

    Want to sit in the cockpit of the Space Shuttle and watch astronauts work in outer space? At StenniSphere, you can do that and much more. StenniSphere, the visitor center at John C. Stennis Space Center in Hancock County, Miss., presents 14,000-square-feet of interactive exhibits that depict America's race for space as well as a glimpse of the future. StenniSphere is open free of charge from 9 a.m. to 5 p.m. daily.

  11. Systematic Approach to Electrostatically Induced 2D Crystallization of Nanoparticles at Liquid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Fukuto, M.; Kewalramani, S.; Wang, S.; Lin, Y.; Nguyen, G.; Wang, Q.; Yang, L.

    2011-02-07

    We report an experimental demonstration of a strategy for inducing two-dimensional (2D) crystallization of charged nanoparticles on oppositely charged fluid interfaces. This strategy aims to maximize the interfacial adsorption of nanoparticles, and hence their lateral packing density, by utilizing a combination of weakly charged particles and a high surface charge density on the planar interface. In order to test this approach, we investigated the assembly of cowpea mosaic virus (CPMV) on positively charged lipid monolayers at the aqueous solution surface, by means of in situ X-ray scattering measurements at the liquid-vapor interface. The assembly was studied as a function of the solution pH, which was used to vary the charge on CPMV, and of the mole fraction of the cationic lipid in the binary lipid monolayer, which set the interface charge density. The 2D crystallization of CPMV occurred in a narrow pH range just above the particle's isoelectric point, where the particle charge was weakly negative, and only when the cationic-lipid fraction in the monolayer exceeded a threshold. The observed 2D crystals exhibited nearly the same packing density as the densest lattice plane within the known 3D crystals of CPMV. The above electrostatic approach of maximizing interfacial adsorption may provide an efficient route to the crystallization of nanoparticles at aqueous interfaces.

  12. Anniversary Exhibition. Nechvolodov.

    Directory of Open Access Journals (Sweden)

    - -

    2006-03-01

    Full Text Available On the 10th of August, 2005 in Tartu (the second biggest educational and cultural city in Estonia Stanislav Nechvolodov's exhibition was opened to show the 5-year cycle of his work, traditional for the author and his admirers. At the opening ceremony Nechvolodov said that the exhibition was the last one and appointed on his 70th anniversary.The architectural and building society in Irkutsk remembers Stanislav Nechvolodov as an architect working on dwelling and civil buildings in 1960-70s. Below are some extracts from the Estonian press.«Postimees» newspaper, December 1993. The interview «Expressionistic naturalist, conservative Nechvolodov» by journalist Eric Linnumyagi. He asks about all the details and describes the troubles experienced by Nechvolodov during the perestroika period in Estonia, for example: the Tartu University refused to install the sculpture of Socrat, the art school refused to engage him as an instructor, the sculpture of Socrat moved to Vrotzlav, Poland, and Nechvolodov moved to Poland to read lectures there.«Tartu» newspaper, November 2000. Mats Oun, artist, says in the article «Nechvolodov: a man of Renaissance»: «Nechvolodov works in Estonia, his works are placed in many local and foreign museums. Regardless some insignificant faults, he deserves a high estimation, and his manysided open exhibition can be an example for other artists. He is a man of Renaissance».

  13. HEMA/MMA/EDMA packing material evaluation for size exclusion chromatography (SEC

    Directory of Open Access Journals (Sweden)

    Cristina Duarte Vianna-Soares

    2005-03-01

    Full Text Available HEMA/MMA/EDMA (2-hydroxyethyl methacrylate/methyl methacrylate/ethyleneglycol methacrylate copolymer beads have been synthesized for use in aqueous SEC. This porous chromatographic support consisted of a large average particle size (250 µm and contained macropores with a median pore size of approximately 880 Å. The material was packed in glass and stainless columns to assess their chromatographic performance. The packed columns were calibrated using narrow molecular weight (MW distribution standards (dextran and exhibited a range of molecular weight separation between 40,000 and 2,000,000 daltons. The packing material showed the ability to separate large molecules through the size exclusion mechanism.

  14. The relationship between efficient packing and glass-forming ability in hard-sphere systems

    Science.gov (United States)

    Zhang, Kai

    2014-03-01

    When supercooled liquids are rapidly quenched at rates R exceeding a critical value Rc, they avoid crystallization and form amorphous solids, such as bulk metallic glasses (BMGs). However, engineering applications of BMGs are often limited by the high cost of the constituent elements and their small casting thickness. Thus, we seek to design particular alloys with controllable stoichiometry and maximal critical cooling rate Rc. We perform numerical simulations to compress binary hard-sphere mixtures into glasses as a function of the particle size ratio and stoichiometry. We measure the packing fraction and local structural order for each glass to determine the critical compression rate. We find that large packing fraction differences between the crystalline and amorphous states implies poor glass forming ability, whereas small packing fraction differences yield better glass-formers. In addition, we show that an abundance of icosahedral order in amorphous packings enhances the glass forming ability of the mixtures. NSF MRSEC DMR-1119826, DMR-1006537, CBET-0968013.

  15. The “Theoreticals” Pack

    CERN Document Server

    CERN Bulletin

    2011-01-01

    The Particle Zoo is a colourful set of hand-made soft toys representing the particles in the Standard Model and beyond. It includes a “theoreticals” pack where you can find yet undiscovered particles: the best-selling Higgs boson, the graviton, the tachyon, and dark matter. Supersymmetric particle soft toys are also available on demand. But what would happen to the zoo if Nature had prepared some unexpected surprises? Julie Peasley, the zookeeper, is ready to sew new smiling faces…   The "Theoreticals" pack in the Particle Zoo. There is only one place in the world where you can buy a smiling Higgs boson and it’s not at CERN, although this is where scientists hope to observe it. The blue star-shaped particle is the best seller of Julie Peasley’s Particle Zoo – a collection of tens of soft toys representing all sorts of particles, including composite and decaying particles.  Over the years Julie’s zoo ...

  16. Fast searching in packed strings

    DEFF Research Database (Denmark)

    Bille, Philip

    2011-01-01

    Given strings P and Q the (exact) string matching problem is to find all positions of substrings in Q matching P. The classical Knuth–Morris–Pratt algorithm [SIAM J. Comput. 6 (2) (1977) 323–350] solves the string matching problem in linear time which is optimal if we can only read one character...... at the time. However, most strings are stored in a computer in a packed representation with several characters in a single word, giving us the opportunity to read multiple characters simultaneously. In this paper we study the worst-case complexity of string matching on strings given in packed representation....... Let m⩽n be the lengths P and Q, respectively, and let σ denote the size of the alphabet. On a standard unit-cost word-RAM with logarithmic word size we present an algorithm using timeO(nlogσn+m+occ). Here occ is the number of occurrences of P in Q. For m=o(n) this improves the O(n) bound of the Knuth...

  17. A posteriori design of crystal contacts to improve the X-ray diffraction properties of a small RNA enzyme

    Energy Technology Data Exchange (ETDEWEB)

    MacElrevey, Celeste [Department of Biochemistry and Biophysics, University of Rochester School of Medicine and Dentistry, Rochester, New York 14642 (United States); Spitale, Robert C. [Department of Chemistry, Biological Chemistry Cluster, River Campus Box 270216, University of Rochester, Rochester, New York 14627-0216 (United States); Krucinska, Jolanta [Department of Biochemistry and Biophysics, University of Rochester School of Medicine and Dentistry, Rochester, New York 14642 (United States); Wedekind, Joseph E., E-mail: joseph.wedekind@rochester.edu [Department of Biochemistry and Biophysics, University of Rochester School of Medicine and Dentistry, Rochester, New York 14642 (United States); Department of Chemistry, Biological Chemistry Cluster, River Campus Box 270216, University of Rochester, Rochester, New York 14627-0216 (United States)

    2007-07-01

    Insertion of a dangling 5′-uracil and incorporation of synthetic linkers at the domain interface of a minimal hairpin ribozyme have been investigated as means of favorably influencing crystal packing. These modifications lead to changes in the ribozyme’s structural elements that mimic packing within a natural four-way helical junction, thereby providing an example of how knowledge-based design can be used to enhance the diffraction properties of a tertiarily folded RNA. The hairpin ribozyme is a small catalytic RNA comprising two helix–loop–helix domains linked by a four-way helical junction (4WJ). In its most basic form, each domain can be formed independently and reconstituted without a 4WJ to yield an active enzyme. The production of such minimal junctionless hairpin ribozymes is achievable by chemical synthesis, which has allowed structures to be determined for numerous nucleotide variants. However, abasic and other destabilizing core modifications hinder crystallization. This investigation describes the use of a dangling 5′-U to form an intermolecular U·U mismatch, as well as the use of synthetic linkers to tether the loop A and B domains, including (i) a three-carbon propyl linker (C3L) and (ii) a nine-atom triethylene glycol linker (S9L). Both linker constructs demonstrated similar enzymatic activity, but S9L constructs yielded crystals that diffracted to 2.65 Å resolution or better. In contrast, C3L variants diffracted to 3.35 Å and exhibited a 15 Å expansion of the c axis. Crystal packing of the C3L construct showed a paucity of 6{sub 1} contacts, which comprise numerous backbone to 2′-OH hydrogen bonds in junctionless and S9L complexes. Significantly, the crystal packing in minimal structures mimics stabilizing features observed in the 4WJ hairpin ribozyme structure. The results demonstrate how knowledge-based design can be used to improve diffraction and overcome otherwise destabilizing defects.

  18. A ditopic O(4)S(2) macrocycle and its hard, soft, and hard/soft metal complexes exhibiting endo-, exo-, or endo/exocyclic coordination: synthesis, crystal structures, NMR titration, and physical properties.

    Science.gov (United States)

    Ryu, Hyunsoo; Park, Ki-Min; Ikeda, Mari; Habata, Yoichi; Lee, Shim Sung

    2014-04-21

    A 20-membered O4S2 macrocycle (L(2)) was synthesized as a ditopic ligating system toward hard and soft metal ions simultaneously. Five complexes (3-7) of L(2) with different structures and coordination modes, including discrete to infinite forms, mono- to heteronuclear, and endo- to exo- and endo/exocoordination, were prepared and structurally characterized. First, the reaction of L(2) with Pb(ClO4)2·3H2O afforded a typical endocyclic mononuclear perchlorato complex [Pb(L(2))(ClO4)2] (3) in which one lead(II) is surrounded by the macrocycle adopting a "tight and bent" conformation. Meanwhile, the reaction with a softer metal salt AgNO3 resulted in the formation of the dinuclear bis(macrocycle) complex [Ag2(L(2))2(NO3)2] (4) in which two exocyclic silver(I) ions are doubly linked by two nitrate ions. The treatment of L(2) with CuI gave a mixture of the exocyclic monomer complex [Cu(L(2))I] (5) and the exocyclic dimer complex [(Cu2I2)(L(2))2] (6), which were separated manually because of their brick and rhomboid shapes of the crystals, respectively. Furthermore, the reaction of L(2) with a mixture of CuI and NaI afforded a photoluminescent heteronuclear complex [Na2(Cu6I8)(L(2))2(CH3CN)4]n (7) in the endo/exocyclic coordination mode. In this case, the endocyclic sodium(I) complex units are linked by the double-open cubanes-type cluster Cu6I8, yielding a two-dimensional network. The structural and binding properties of the complex of L(2) with silver(I) nitrate in solution were monitored by the NMR titration. Photophysical and thermal properties for complex 7 were also investigated and discussed.

  19. Controlled hydrothermal synthesis of BiO{sub x}Cl{sub y}/BiO{sub m}I{sub n} composites exhibiting visible-light photocatalytic degradation of crystal violet

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Yu-Rou; Lin, Ho-Pan [Department of Science Application and Dissemination, National Taichung University of Education, Taichung 403, Taiwan, ROC (China); Chung, Wen-Hsin [Department of Plant Pathology, National Chung Hsing University, Taichung 402, Taiwan, ROC (China); Dai, Yong-Ming [Department of Science Application and Dissemination, National Taichung University of Education, Taichung 403, Taiwan, ROC (China); Lin, Wan-Yu [Department of Plant Pathology, National Chung Hsing University, Taichung 402, Taiwan, ROC (China); Chen, Chiing-Chang, E-mail: ccchen@ms3.ntcu.edu.tw [Department of Science Application and Dissemination, National Taichung University of Education, Taichung 403, Taiwan, ROC (China)

    2015-02-11

    Highlights: • This is the first report on a series of BiO{sub x}Cl{sub y}/BiO{sub m}I{sub n} heterojunctions. • The BiO{sub x}Cl{sub y}/BiO{sub m}I{sub n} composition was controlled by adjusting the growth parameters. • The BiO{sub x}Cl{sub y}/BiO{sub m}I{sub n} were indirect semiconductors with a 1.78–2.95-eV bandgap. • The new photocatalysts removed CV at a much faster rate than TiO{sub 2}. • Mechanisms were determined by separating the intermediates using HPLC-MS. - Abstract: A series of BiO{sub x}Cl{sub y}/BiO{sub m}I{sub n} composites were prepared using autoclave hydrothermal methods. The composition and morphologies of the BiO{sub x}Cl{sub y}/BiO{sub m}I{sub n} composites were controlled by adjusting the experimental conditions: the reaction pH value, temperature, and KCl/KI molar ratio. The products were characterized using X-ray diffraction, scanning electron microscopy-electron dispersive X-ray spectroscopy, UV–vis diffuse reflectance spectroscopy, Brunauer–Emmett–Teller specific surface areas, cathodoluminescence, high-resolution transmission electron microscopy, and high-resolution X-ray photoelectron spectroscopy. The photocatalytic efficiencies of composite powder suspensions were evaluated by monitoring the crystal violet (CV) concentrations. In addition, the quenching effects of various scavengers indicated that the reactive O{sub 2}·{sup −} played a major role, and OH· or h{sup +} played a minor role in CV degradation. The intermediates formed during the decomposition process were isolated, identified, and characterized using high performance liquid chromatography-photodiode array-electrospray ionization-mass spectrometry to elucidate the CV decomposition mechanism.

  20. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find......Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... the competitive ratio of various natural algorithms. We study the general versions of the problems as well as the parameterized versions where there is an upper bound of on the item sizes, for some integer k....

  1. L1-norm packings from function fields

    Institute of Scientific and Technical Information of China (English)

    LI Hongli

    2005-01-01

    In this paper, we study some packings in a cube, namely, how to pack n points in a cube so as to maximize the minimal distance. The distance is induced by the L1-norm which is analogous to the Hamming distance in coding theory. Two constructions with reasonable parameters are obtained, by using some results from a function field including divisor class group, narrow ray class group, and so on. We also present some asymptotic results of the two packings.

  2. Circle Packing for Origami Design Is Hard

    CERN Document Server

    Demaine, Erik D; Lang, Robert J

    2010-01-01

    We show that deciding whether a given set of circles can be packed into a rectangle, an equilateral triangle, or a unit square are NP-hard problems, settling the complexity of these natural packing problems. On the positive side, we show that any set of circles of total area 1 can be packed into a square of size 8/pi=2.546... These results are motivated by problems arising in the context of origami design.

  3. Crystal structures of the all-cysteinyl-coordinated D14C variant of Pyrococcus furiosus ferredoxin: [4Fe–4S] ↔ [3Fe–4S] cluster conversion

    DEFF Research Database (Denmark)

    Løvgreen, Monika Nøhr; Martic, Maja; Windahl, Michael S.

    2011-01-01

    molecules have different crystal packing and intramolecular disulfide bond conformation. The crystal packing reveals a β-sheet interaction between A molecules in adjacent asymmetric units, whereas B molecules are packed as monomers in a less rigid position next to the A–A extended β-sheet dimers...

  4. Random close packing of polydisperse jammed emulsions

    Science.gov (United States)

    Brujic, Jasna

    2010-03-01

    Packing problems are everywhere, ranging from oil extraction through porous rocks to grain storage in silos and the compaction of pharmaceutical powders into tablets. At a given density, particulate systems pack into a mechanically stable and amorphous jammed state. Theoretical frameworks have proposed a connection between this jammed state and the glass transition, a thermodynamics of jamming, as well as geometric modeling of random packings. Nevertheless, a simple underlying mechanism for the random assembly of athermal particles, analogous to crystalline ordering, remains unknown. Here we use 3D measurements of polydisperse packings of emulsion droplets to build a simple statistical model in which the complexity of the global packing is distilled into a local stochastic process. From the perspective of a single particle the packing problem is reduced to the random formation of nearest neighbors, followed by a choice of contacts among them. The two key parameters in the model, the available space around a particle and the ratio of contacts to neighbors, are directly obtained from experiments. Remarkably, we demonstrate that this ``granocentric'' view captures the properties of the polydisperse emulsion packing, ranging from the microscopic distributions of nearest neighbors and contacts to local density fluctuations and all the way to the global packing density. Further applications to monodisperse and bidisperse systems quantitatively agree with previously measured trends in global density. This model therefore reveals a general principle of organization for random packing and lays the foundations for a theory of jammed matter.

  5. Random packing of spheres in Menger sponge.

    Science.gov (United States)

    Cieśla, Michał; Barbasz, Jakub

    2013-06-07

    Random packing of spheres inside fractal collectors of dimension 2 algorithm. The paper focuses mainly on the measurement of random packing saturation limit. Additionally, scaling properties of density autocorrelations in the obtained packing are analyzed. The RSA kinetics coefficients are also measured. Obtained results allow to test phenomenological relation between random packing saturation density and collector dimension. Additionally, performed simulations together with previously obtained results confirm that, in general, the known dimensional relations are obeyed by systems having non-integer dimension, at least for d < 3.

  6. SPECTRUM OF DIRECTED KIRKMAN PACKING DESIGNS

    Institute of Scientific and Technical Information of China (English)

    ZhangYan; DuBeiliang

    2003-01-01

    The problem studied in this article is the directed Kirkman packing, the resolvable directed packing which requires all blocks to be of size three except that ,each resolution class should contain either one block of size two(when v=2(mod 3)) or one block of size four (when v=l (mod 3)). A directed Kirkman packing design DKPD(v) is a resolvable directed packing of a v-set by the maximum possible number of resolution classes of this type. This article investigates the spectrum of DKPD(v) and it is found that it contains all positive integers v≥3 and v≠5,6.

  7. Minimally packed phases in holography

    CERN Document Server

    Donos, Aristomenis

    2015-01-01

    We numerically construct asymptotically AdS black brane solutions of $D=4$ Einstein-Maxwell theory coupled to a pseudoscalar. The solutions are holographically dual to $d=3$ CFTs held at constant chemical potential and magnetic field that spontaneously break translation invariance leading to the spontaneous formation of abelian and momentum magnetisation currents flowing around the plaquettes of a periodic Bravais lattice. We analyse the three-dimensional moduli space of lattice solutions, which are generically oblique, and show that the free energy is minimised by the triangular lattice, associated with minimal packing of circles in the plane. The triangular structure persists at low temperatures indicating the existence of novel crystalline ground states.

  8. 2007Fairs & Exhibitions in China

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The 6th China (Guangzhou) International Seasoning Exhibition Date: May 11-13 Founded in: 2003.05 Venues: Guangzhou Int'l Convention &Exhibition Center (Pazhou) Exhibits: Seasonings, food additives, relevant material,equipment, service and publications

  9. 2005 Fairs & Exhibitions in China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Harbin China International Winter Goods Exhibition DATE: Jan. 5-9 FREQUENCY: Annual FOUNDED TIME: Dec. 2001 VENUE: Harbin China International Conference & Exhibition Center EXHIBITS: winter sports goods and outdoor devices

  10. Particle-size distribution and packing fraction of geometric random packings

    NARCIS (Netherlands)

    Brouwers, H.J.H.

    2006-01-01

    This paper addresses the geometric random packing and void fraction of polydisperse particles. It is demonstrated that the bimodal packing can be transformed into a continuous particle-size distribution of the power law type. It follows that a maximum packing fraction of particles is obtained when t

  11. Development of an effective valve packing program

    Energy Technology Data Exchange (ETDEWEB)

    Hart, K.A.

    1996-12-01

    Current data now shows that graphite valve packing installed within the guidance of a controlled program produces not only reliable stem sealing but predictable running loads. By utilizing recent technological developments in valve performance monitoring for both MOV`s and AOV`s, valve packing performance can be enhanced while reducing maintenance costs. Once known, values are established for acceptable valve packing loads, the measurement of actual valve running loads via the current MOV/AOV diagnostic techniques can provide indication of future valve stem sealing problems, improper valve packing installation or identify the opportunity for valve packing program improvements. At times the full benefit of these advances in material and predictive technology remain under utilized due to simple past misconceptions associated with valve packing. This paper will explore the basis for these misconceptions, provide general insight into the current understanding of valve packing and demonstrate how with this new understanding and current valve diagnostic equipment the key aspects required to develop an effective, quality valve packing program fit together. The cost and operational benefits provided by this approach can be significant impact by the: elimination of periodic valve repacking, reduction of maintenance costs, benefits of leak-free valve operation, justification for reduced Post Maintenance Test Requirements, reduced radiation exposure, improved plant appearance.

  12. On maximum cycle packings in polyhedral graphs

    Directory of Open Access Journals (Sweden)

    Peter Recht

    2014-04-01

    Full Text Available This paper addresses upper and lower bounds for the cardinality of a maximum vertex-/edge-disjoint cycle packing in a polyhedral graph G. Bounds on the cardinality of such packings are provided, that depend on the size, the order or the number of faces of G, respectively. Polyhedral graphs are constructed, that attain these bounds.

  13. BIPP (BISMUTH IODINE PARAFFINE PASTE PACK REVISITED

    Directory of Open Access Journals (Sweden)

    Balasubramanian Thiagarajan

    2011-09-01

    Full Text Available This review article takes a new look at the use of BIPP pack following nasal and ear surgeries. It lists the advantages and pitfalls of using this packing material. Pubmed search revealed very little material on this topic hence I compiled existing data to bring out an article.

  14. Meromorphic Vector Fields and Circle Packings

    DEFF Research Database (Denmark)

    Dias, Kealey

    to structurally stable vector fields, there is an underlying dynamically defined triangulation of the plane. Circle packings are a means to realize such a given combinatorial structure. About 20 years ago, W. Thurston suggested applying circle packings to obtain approximations to Riemann mappings. This gave rise...

  15. Improved lower bound for online strip packing

    NARCIS (Netherlands)

    Harren, Rolf; Kern, Walter

    2012-01-01

    In the two-dimensional strip packing problem a number of rectangles have to be packed without rotation or overlap into a strip such that the height of the strip used is minimal. The width of the rectangles is bounded by 1 and the strip has width 1 and infinite height. We study the online version of

  16. 7 CFR 29.1048 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 29.1048 Section 29.1048 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1048 Packing. A lot of tobacco consisting of a number of packages submitted as...

  17. 7 CFR 29.6031 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 29.6031 Section 29.6031 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Definitions § 29.6031 Packing. A lot of tobacco consisting of a number of...

  18. 7 CFR 29.3538 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 29.3538 Section 29.3538 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3538 Packing. A lot of tobacco consisting of a number of packages submitted as...

  19. Difference packing arrays and systematic authentication codes

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In this paper, a type of combinatorial design (called difference packing array)is proposed and used to give a construction of systematic authentication codes. Taking advantage of this construction, some new series of systematic authentication codes are obtainable in terms of existing difference packing arrays.

  20. 7 CFR 29.2541 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 29.2541 Section 29.2541 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...-Cured Tobacco (u.s. Types 22, 23, and Foreign Type 96) § 29.2541 Packing. A lot of tobacco consisting...

  1. 7 CFR 29.3048 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 29.3048 Section 29.3048 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Packing. A lot of tobacco consisting of a number of packages submitted as one definite unit for...

  2. 7 CFR 29.2289 - Packing.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Packing. 29.2289 Section 29.2289 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Packing. A lot of tobacco consisting of a number of packages submitted as one definite unit for...

  3. Does Post Septoplasty Nasal Packing Reduce Complications?

    Directory of Open Access Journals (Sweden)

    Bijan Naghibzadeh

    2011-01-01

    Full Text Available The main issues in nasal surgery are to stabilize the nose in the good position after surgery and preserve the cartilages and bones in the favorable situation and reduce the risk of deviation recurrence. Also it is necessary to avoid the synechia formation, nasal valve narrowing, hematoma and bleeding. Due to the above mentioned problems and in order to solve and minimize them nasal packing, nasal splint and nasal mold have been advised. Patients for whom the nasal packing used may faced to some problems like naso-pulmonary reflex, intractable pain, sleep disorder, post operation infection and very dangerous complication like toxic shock syndrome. We have two groups of patients and three surgeons (one of the surgeons used post operative nasal packing in his patients and the two others surgeons did not.Complications and morbidities were compared in these two groups. Comparing the two groups showed that the rate of complication and morbidities between these two groups were same and the differences were not valuable, except the pain and discomfort post operatively and at the time of its removal. Nasal packing has several risks for the patients while its effects are not studied. Septoplasty can be safely performed without postoperative nasal packing. Nasal packing had no main findings that compensated its usage. Septal suture is one of the procedures that can be used as alternative method to nasal packing. Therefore the nasal packing after septoplasty should be reserved for the patients with increased risk of bleeding.

  4. Pack formation in cycling and orienteering.

    Science.gov (United States)

    Ackland, G J; Butler, D

    2001-09-13

    In cycling and orienteering competitions, competitors can become bunched into packs, which may mask an individual's true ability. Here we model this process with a view to determining when competitors' times are determined more by others than by their own ability. Our results may prove useful in helping to stage events so that pack formation can be avoided.

  5. Monitoring three-dimensional packings in microgravity.

    NARCIS (Netherlands)

    Yu, Peidong; Frank-Richter, Stefan; Börngen, Alexander; Sperl, Matthias

    2014-01-01

    We present results from experiments with granular packings in three dimensions in microgravity as realized on parabolic flights. Two different techniques are employed to monitor the inside of the packings during compaction: (1) X-ray radiography is used to measure in transmission the integrated fluc

  6. On contact numbers in random rod packings

    NARCIS (Netherlands)

    Wouterse, A.; Luding, Stefan; Philipse, A.P.

    2009-01-01

    Random packings of non-spherical granular particles are simulated by combining mechanical contraction and molecular dynamics, to determine contact numbers as a function of density. Particle shapes are varied from spheres to thin rods. The observed contact numbers (and packing densities) agree well

  7. Cluster and constraint analysis in tetrahedron packings.

    Science.gov (United States)

    Jin, Weiwei; Lu, Peng; Liu, Lufeng; Li, Shuixiang

    2015-04-01

    The disordered packings of tetrahedra often show no obvious macroscopic orientational or positional order for a wide range of packing densities, and it has been found that the local order in particle clusters is the main order form of tetrahedron packings. Therefore, a cluster analysis is carried out to investigate the local structures and properties of tetrahedron packings in this work. We obtain a cluster distribution of differently sized clusters, and peaks are observed at two special clusters, i.e., dimer and wagon wheel. We then calculate the amounts of dimers and wagon wheels, which are observed to have linear or approximate linear correlations with packing density. Following our previous work, the amount of particles participating in dimers is used as an order metric to evaluate the order degree of the hierarchical packing structure of tetrahedra, and an order map is consequently depicted. Furthermore, a constraint analysis is performed to determine the isostatic or hyperstatic region in the order map. We employ a Monte Carlo algorithm to test jamming and then suggest a new maximally random jammed packing of hard tetrahedra from the order map with a packing density of 0.6337.

  8. 7 CFR 51.1217 - Standard pack.

    Science.gov (United States)

    2010-01-01

    ... be ring faced and tightly packed with sufficient bulge to prevent any appreciable movement of the... the box. (d) Peaches packed in other type boxes such as wire-bound boxes and fiber-board boxes may be... than 10 percent of the packages in any lot may not meet these requirements. (i) “Well filled”...

  9. Flexible and Asymmetric Ligand in Constructing Coordinated Complexes: Synthesis, Crystal Structures and Fluorescent Characterization

    Directory of Open Access Journals (Sweden)

    Jianhua Lin

    2010-12-01

    Full Text Available Flexible and asymmetric ligand L [L = 1-((pyridin-3-ylmethyl-1H-benzotriazole], is used as a basic backbone to construct complicated metal-organic frameworks. Two new polymers, namely, [Ag2(L2(NO32]n (1 and [Ag(L(ClO4]n (2, were synthesized and characterized by X-ray structure analysis and fluorescent spectroscopy. The complex 1 gives an “S” type double helical conformation, whereas complex 2 exhibits a 1D zigzag configuration. Different anions affect the silver coordination geometry and crystal packing topology.

  10. Crystallization of Self-Propelled Hard Discs

    Science.gov (United States)

    Briand, G.; Dauchot, O.

    2016-08-01

    We experimentally study the crystallization of a monolayer of vibrated discs with a built-in polar asymmetry, a model system of active liquids, and contrast it with that of vibrated isotropic discs. Increasing the packing fraction ϕ , the quasicontinuous crystallization reported for isotropic discs is replaced by a transition, or a crossover, towards a "self-melting" crystal. Starting from the liquid phase and increasing the packing fraction, clusters of dense hexagonal-ordered packed discs spontaneously form, melt, split, and merge, leading to a highly intermittent and heterogeneous dynamics. For a packing fraction larger than ϕ*, a few large clusters span the system size. The cluster size distribution is monotonically decreasing for ϕ ϕ*, and is a power law at the transition. The system is, however, never dynamically arrested. The clusters permanently melt from place to place, forming droplets of an active liquid which rapidly propagate across the system. This self-melting crystalline state subsists up to the highest possible packing fraction, questioning the stability of the crystal for active discs unless it is at ordered close packing.

  11. 7 CFR 51.2840 - Export packing requirements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Export packing requirements. 51.2840 Section 51.2840...) Export Packing Requirements § 51.2840 Export packing requirements. Onions specified as meeting Export Packing Requirements shall be packed in containers having a net capacity of 25 kilograms (approximately...

  12. Connection between the packing efficiency of binary hard spheres and the glass-forming ability of bulk metallic glasses

    Science.gov (United States)

    Zhang, Kai; Smith, W. Wendell; Wang, Minglei; Liu, Yanhui; Schroers, Jan; Shattuck, Mark D.; O'Hern, Corey S.

    2014-09-01

    We perform molecular dynamics simulations to compress binary hard spheres into jammed packings as a function of the compression rate R, size ratio α, and number fraction xS of small particles to determine the connection between the glass-forming ability (GFA) and packing efficiency in bulk metallic glasses (BMGs). We define the GFA by measuring the critical compression rate Rc, below which jammed hard-sphere packings begin to form "random crystal" structures with defects. We find that for systems with α ≳0.8 that do not demix, Rc decreases strongly with ΔϕJ, as Rc˜exp(-1/ΔϕJ2), where ΔϕJ is the difference between the average packing fraction of the amorphous packings and random crystal structures at Rc. Systems with α ≲0.8 partially demix, which promotes crystallization, but we still find a strong correlation between Rc and ΔϕJ. We show that known metal-metal BMGs occur in the regions of the α and xS parameter space with the lowest values of Rc for binary hard spheres. Our results emphasize that maximizing GFA in binary systems involves two competing effects: minimizing α to increase packing efficiency, while maximizing α to prevent demixing.

  13. Connection between the packing efficiency of binary hard spheres and the glass-forming ability of bulk metallic glasses.

    Science.gov (United States)

    Zhang, Kai; Smith, W Wendell; Wang, Minglei; Liu, Yanhui; Schroers, Jan; Shattuck, Mark D; O'Hern, Corey S

    2014-09-01

    We perform molecular dynamics simulations to compress binary hard spheres into jammed packings as a function of the compression rate R, size ratio α, and number fraction x(S) of small particles to determine the connection between the glass-forming ability (GFA) and packing efficiency in bulk metallic glasses (BMGs). We define the GFA by measuring the critical compression rate R(c), below which jammed hard-sphere packings begin to form "random crystal" structures with defects. We find that for systems with α≳0.8 that do not demix, R(c) decreases strongly with Δϕ(J), as R(c)∼exp(-1/Δϕ(J)(2)), where Δϕ(J) is the difference between the average packing fraction of the amorphous packings and random crystal structures at R(c). Systems with α≲0.8 partially demix, which promotes crystallization, but we still find a strong correlation between R(c) and Δϕ(J). We show that known metal-metal BMGs occur in the regions of the α and x(S) parameter space with the lowest values of R(c) for binary hard spheres. Our results emphasize that maximizing GFA in binary systems involves two competing effects: minimizing α to increase packing efficiency, while maximizing α to prevent demixing.

  14. 36 CFR 1284.30 - Does NARA lend documents to other institutions for exhibit purposes?

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Does NARA lend documents to other institutions for exhibit purposes? 1284.30 Section 1284.30 Parks, Forests, and Public Property... security, fire protection, environmental controls, packing and shipping, exhibit methods, and insurance...

  15. Structural Elucidation of α-Cyclodextrin-Succinic Acid Pseudo Dodecahydrate: Expanding the Packing Types of α-Cyclodextrin Inclusion Complexes

    Directory of Open Access Journals (Sweden)

    Sofiane Saouane

    2015-12-01

    Full Text Available This paper reports a new packing type of α-cyclodextrin inclusion complexes, obtained here with succinic acid under low-temperature crystallization conditions. The structure of the 1:1 complex is characterized by heavy disorder of the guest, the solvent, and part of the host. The crystal packing belongs to the known channel-type structure; the basic structural unit is composed of cyclodextrin trimers, as opposed to the known isolated molecular or dimeric constructs, packed along the c-axis. Each trimer is made of crystallographically independent molecules assembled in a stacked vase-like cluster. A multi-temperature single-crystal X-ray diffraction analysis reveals the presence of dynamic disorder.

  16. Random-close packing limits for monodisperse and polydisperse hard spheres.

    Science.gov (United States)

    Baranau, Vasili; Tallarek, Ulrich

    2014-06-07

    We investigate how the densities of inherent structures, which we refer to as the closest jammed configurations, are distributed for packings of 10(4) frictionless hard spheres. A computational algorithm is introduced to generate closest jammed configurations and determine corresponding densities. Closest jamming densities for monodisperse packings generated with high compression rates using Lubachevsky-Stillinger and force-biased algorithms are distributed in a narrow density range from φ = 0.634-0.636 to φ≈ 0.64; closest jamming densities for monodisperse packings generated with low compression rates converge to φ≈ 0.65 and grow rapidly when crystallization starts with very low compression rates. We interpret φ≈ 0.64 as the random-close packing (RCP) limit and φ≈ 0.65 as a lower bound of the glass close packing (GCP) limit, whereas φ = 0.634-0.636 is attributed to another characteristic (lowest typical, LT) density φLT. The three characteristic densities φLT, φRCP, and φGCP are determined for polydisperse packings with log-normal sphere radii distributions.

  17. Hawking Colloquium Packed CERN Auditoriums

    CERN Multimedia

    2006-01-01

    Stephen Hawking's week long visit to CERN included an 'exceptional CERN colloquium' which filled six auditoriums. Stephen Hawking during his visit to the ATLAS experiment. Stephen Hawking, Lucasian Professor of Cambridge University, visited the Theory Unit of the Physics Department from 24 September to 1 October 2006. As part of his visit, he gave two lectures in the main auditorium - a theoretical seminar on 'The Semi-Classical Birth of The Universe', attended by about 120 specialists; and a colloquium titled 'The Origin of The Universe'. As a key public figure in theoretical physics, his presence was eagerly awaited on both occasions. Those who wanted to attend the colloquium had to arrive early and be equipped with plenty of patience. An hour before it was due to begin, the 400 capacity of the main auditorium was already full. The lecture, simultaneously broadcast to five other fully packed CERN auditoriums, was attended by an estimated total of 850. Stephen Hawking attracted a large CERN crowd, filling ...

  18. SOLUTION CRYSTALLIZATION OF METALLOCENE SHORT CHAIN BRANCHED POLYETHYLENE: MORPHOLOGY AND MECHANISM

    Institute of Scientific and Technical Information of China (English)

    Qiang Fu; Rong-ni Du; Fang-Chyou Chiu

    2000-01-01

    Solution crystallization of metallocene short chain branched polyethylene (SCBPE) was carried out and very nice single crystals were obtained. Compared with single crystals grown from linear polyethylene, SCBPE single crystals are dirty due to intermolecular heterogeneity The crystal morphology changes with crystallization temperatures. Lozenge, truncated lozenge, hexagonal, rounded and elongated crystal morphologies have been found at much lower crystallization temperature than in linear polyethylene. The electron diffraction shows there is a possibility that the single crystals may have hexagonal packing in a crystallization temperature range. The lateral habits of single crystal are discussed based on roughening theories.

  19. A method for dense packing discovery

    CERN Document Server

    Kallus, Yoav; Gravel, Simon

    2010-01-01

    The problem of packing a system of particles as densely as possible is foundational in the field of discrete geometry and is a powerful model in the material and biological sciences. As packing problems retreat from the reach of solution by analytic constructions, the importance of an efficient numerical method for conducting de novo (from-scratch) searches for dense packings becomes crucial. In this paper, we use the divide and concur framework to develop a general search method for the solution of periodic constraint problems, and we apply it to the discovery of dense periodic packings. An important feature of the method is the integration of the unit cell parameters with the other packing variables in the definition of the configuration space. The method we present led to improvements in the densest-known tetrahedron packing which are reported in [arXiv:0910.5226]. Here, we use the method to reproduce the densest known lattice sphere packings and the best known lattice kissing arrangements in up to 14 and ...

  20. Frustration and single crystal morphology of isotactic poly(2-vinylpyridine)

    NARCIS (Netherlands)

    Okihara, T; Cartier, L; van Ekenstein, GORA; Lotz, B

    1999-01-01

    The crystal structure of isotactic poly(2-vinylpyridine) (iP2VP) established in 1977 by Puterman et al. is shown to conform to a recently proposed frustrated packing scheme which involves three isochiral three-fold helices packed in a trigonal unit-cell, and observed in a number of polymers and biop

  1. Integral packing of trees and branchings

    Energy Technology Data Exchange (ETDEWEB)

    Trubin, V.A.

    1995-09-01

    This article continues the discussion of the author`s results on strictly polynomial algorithms for network strength problems (it is assumed that the reader is familiar with the previous publications). It considers the problem of optimal integral packing of spanning trees in a graph and proposes a strictly polynomial algorithm for the solution of this problem. The spanning tree packing and network covering algorithms described produce noninteger solutions. However, the Tutte-Nash-Williams theorem provides a good characterization for the solution of the corresponding problems for trees with integral cardinalities. Interger solutions can be obtained by Cunningham`s general algorithm, which produces an integer solution for the problem of packing of bases of a polymatroid polyhedron. This algorithm, however, is characterized by high time complexity. Moreover, the number of packed bases (in our case, spanning trees) in Seriver`s modification is double the theoretical minimum. In this paper, we apply the results to propose on O(n{sup 2} mp) algorithm for the problem of integral packing of spanning trees, where n and m respectively are the number of vertices and edges in the graph G and p is the time complexity of the maximum flow problem on G. The algorithm constructs a basis solution, so that the optimal solution contains a minimum number of spanning trees of nonzero cardinalities. In other words, the number of nonzero components forming the optimal packing does not exceed n. The proposed algorithm is easily modified for the solution of problems of minimum integral packing and covering described elswhere, and its elaboration for the present case is left to the reader. The spanning tree packing problem is transformed into a similar problem for digraphs, specifically, the problem of packing branchings into a given digraph with a distinguished root. A good characterization of this problem is provided by the Edmonds theorem.

  2. Modular vaccine packaging increases packing efficiency.

    Science.gov (United States)

    Norman, Bryan A; Rajgopal, Jayant; Lim, Jung; Gorham, Katrin; Haidari, Leila; Brown, Shawn T; Lee, Bruce Y

    2015-06-17

    Within a typical vaccine supply chain, vaccines are packaged into individual cylindrical vials (each containing one or more doses) that are bundled together in rectangular "inner packs" for transport via even larger groupings such as cold boxes and vaccine carriers. The variability of vaccine inner pack and vial size may hinder efficient vaccine distribution because it constrains packing of cold boxes and vaccine carriers to quantities that are often inappropriate or suboptimal in the context of country-specific vaccination guidelines. We developed in Microsoft Excel (Microsoft Corp., Redmond, WA) a spreadsheet model that evaluated the impact of different packing schemes for the Benin routine regimen plus the introduction of the Rotarix vaccine. Specifically, we used the model to compare the current packing scheme to that of a proposed modular packing scheme. Conventional packing of a Dometic RCW25 that aims to maximize fully-immunized children (FICs) results in 123 FICs and a packing efficiency of 81.93% compared to a maximum of 155 FICs and 94.1% efficiency for an alternative modular packaging system. Our analysis suggests that modular packaging systems could offer significant advantages over conventional vaccine packaging systems with respect to space efficiency and potential FICs, when they are stored in standard vaccine carrying devices. This allows for more vaccines to be stored within the same volume while also simplifying the procedures used by field workers to pack storage devices. Ultimately, modular packaging systems could be a simple way to help increase vaccine coverage worldwide. Copyright © 2015. Published by Elsevier Ltd.

  3. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    Gaïa Manuella Cany Du 10 au 28 avril 2017 CERN Meyrin, Bâtiment principal Oiseau - Manuella Cany. Tableaux abstraits inspirés de vues satellites ou photos prises du ciel. Certains sont à la frontière du figuratif alors que d'autres permettent de laisser libre cours à son imagination. Aux détails infinis, ces tableaux sont faits pour être vus de loin et de près grâce à une attention toute particulière apportée aux effets de matières et aux couleurs le long de volutes tantôt nuancées tantôt contrastées.   Pour plus d’informations : staff.association@cern.ch | Tél: 022 766 37 38

  4. Exhibition

    CERN Multimedia

    Staff Association

    2014-01-01

      Parallels vision Astronomical subjects which evoke extrasensory kinetic visions Alberto Di Fabio From 8 to 10 October, CERN Meyrin, Main Building In the framework of Italy@cern, the Staff Association presents Alberto Di Fabio. Di Fabio’s work is inspired by the fundamental laws of the physical world, as well as organic elements and their interrelation. His paintings and works on paper merge the worlds of art and science, depicting natural forms and biological structures in vivid colour and imaginative detail. For all additional information: staff.association@cern.ch | Tel: 022 767 28 19

  5. Exhibition

    CERN Multimedia

    Staff Association

    2011-01-01

    Jan Hladky, physicien de l'Institut de Physique de l'Académie des Sciences de la République tchèque, et membre de la collaboration Alice, expose ses œuvres au Bâtiment principal du 20 avril au 6 mai. Son exposition est dédiée aux victimes du séisme de Sendai. Des copies de ses œuvres seront mises en vente et les sommes récoltées seront versées au profit des victimes.

  6. Exhibition

    CERN Multimedia

    Staff Association

    2016-01-01

    The Elementary Particles of Painting Alfonso Fratteggiani Bianchi and Ermanno Imbergamo From September 26 to October 7, 2016 CERN Meyrin, Main Building With intentions similar to those of CERN physicists, the artist Alfonso Fratteggiani Bianchi investigates the color pigment, studying its interaction with light and with the support on which it is deposited. He creates monochrome paintings by spreading the color pigment in the pure state on stones, without using glue or any other type of adhesive. With intentions similar to artists, the physicist Ermanno Imbergamo investigates the use of luminescent wavelength shifters, materials commonly used in Particle Physics, for art. He creates other monochrome artworks, which disclose further aspects of interaction among light, color pigments and support. For more information: staff.association@cern.ch | Tel: 022 767 28 19

  7. Exhibition

    CERN Multimedia

    Staff Association

    2016-01-01

    La mosaïque ou quand détruire permet de construire Lauren Decamps Du 28 novembre au 9 décembre 2016 CERN Meyrin, Bâtiment principal Paysage d'Amsterdam - Lauren Decamps On ne doit jamais rien détruire qu'on ne soit sûr de pouvoir remplacer aussi avantageusement " écrivait Plutarque dans ses Œuvres morales du 1er siècle après JC. L'artiste mosaïste Lauren Decamps adhère à cette idée et tente à sa manière de donner une nouvelle vie à ses matériaux en les taillant puis les réassemblant, créant ainsi des œuvres abstraites et figuratives.

  8. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    Le Point Isabelle Gailland Du 20 février au 3 mars 2017 CERN Meyrin, Bâtiment principal La Diagonale - Isabelle Gailland. Au départ, un toujours même point minuscule posé au centre de ce que la toile est un espace. Une réplique d'autres points, condensés, alignés, isolés, disséminés construiront dans leur extension, la ligne. Ces lignes, croisées, courbées, déviées, prolongées, seront la structure contenant et séparant la matière des couleurs. La rotation de chaque toile en cours d'exécution va offrir un accès illimité à la non-forme et à la forme. Le point final sera l'ouverture sur différents points de vue de ce que le point et la ligne sont devenus une représentation pour l'œil et l'im...

  9. Exhibition

    CERN Multimedia

    Staff Association

    2016-01-01

    COLORATION Sandra Duchêne From September 5 to 16, 2016 CERN Meyrin, Main Building La recherche de l’Universel. Après tout ! C’est de l’Amour ! What else to say ? …La couleur, l’ENERGIE de la vie…

  10. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    Œuvres recentes Fabienne Wyler Du 6 au 17 février 2017 CERN Meyrin, Bâtiment principal L'escalier du diable B - aquarelle, encre de Chine XLV - Fabienne Wyler. En relation avec certains procédés d’écriture contemporaine (par ex. Webern ou certaines musiques conçues par ordinateur), les compositions picturales de Fabienne Wyler s’élaborent à partir de « modules » (groupes de quadrangles) qu’elle reproduit en leur faisant subir toutes sortes de transformations et de déplacements : étirements, renversements, rotations, effet miroir, transpositions, déphasages, superpositions, etc., et ceci à toutes les échelles. Au fil des œuvres sont apparues des séries intitulées, Bifurcations, Intermittences, Attracteurs étranges, Polyrythmies. Ces titres ont un lien &e...

  11. Exhibition

    CERN Multimedia

    Staff Association

    2014-01-01

    Energie sombre, matière noire J.-J. Dalmais - J. Maréchal Du 11 au 27 novembre 2014, CERN Meyrin, Bâtiment principal A l’image des particules atomiques qui ont tissé des liens pour créer la matière, deux artistes haut bugistes croisent leurs regards et conjuguent leurs expressions singulières pour faire naître une vision commune de l’univers, produit des forces primordiales. Les sculptures de Jean-Jacques Dalmais et les peintures de Jacki Maréchal se rencontrent pour la première fois et se racontent par un enrichissement mutuel la belle histoire de la Vie. Dialogue magique des œuvres en mouvement qui questionnent en écho l’énergie sombre et la matière noire. Cette harmonieuse confluence de jeux de miroir et de résonnance illumine de poésie et de sobriété l’espace expos&...

  12. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    Harmonie Nathalie Lenoir Du 4 au 15 septembre 2017 CERN Meyrin, Bâtiment principal Peindre est un langage. Le tracé du pinceau sur le lin en est l'expression. A qui appartient un tableau en définitive ? A celui qui l'a peint ? A celui qui le regarde ? A celui qui l'emporte ? La peinture est une émotion partagée... Laissez-vous projeter de l'autre côté de la toile, prenez un moment pour rêver, en harmonie avec les éléments, parce-que la peinture parle à votre âme… Pour plus d’informations et demandes d’accès : staff.association@cern.ch | Tél : 022 766 37 38

  13. Exhibition

    CERN Document Server

    Staff Association

    2017-01-01

    Firmament des toiles Joëlle Lalagüe Du 6 au 16 juin 2017 CERN Meyrin, Bâtiment principal Phylaë Voyage - Joëlle Lalagüe. Each picture is an invitation for a cosmic trip. This is a whispering of soul, which comes from origins. A symphony of the world, some notes of love, a harmony for us to fly to infinity. Pour plus d’informations et demandes d'accès : staff.association@cern.ch | Tél: 022 766 37 38

  14. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    La couleur des jours oriSio Du 2 au 12 mai 2017 CERN Meyrin, Bâtiment principal oriSio - Motus Suite à un fort intérêt pour la Chine et une curiosité pour un médium très ancien, la laque ! Je réinterprète cet art à travers un style abstrait. Je présente ici des laques sur aluminium, travaillés au plasma et ensuite colorés à l’aide de pigments pour l’essentiel. Mes œuvres je les veux brutes, déchirées, évanescentes, gondolées, voire trouées mais avec une belle approche de profondeur de la couleur.   Pour plus d’informations : staff.association@cern.ch | Tél: 022 766 37 38

  15. Exhibition

    CERN Multimedia

    Staff Association

    2016-01-01

    La mosaïque ou quand détruire permet de construire Lauren Decamps Du 28 novembre au 9 décembre 2016 CERN Meyrin, Bâtiment principal Paysage d'Amsterdam - Lauren Decamps On ne doit jamais rien détruire qu'on ne soit sûr de pouvoir remplacer aussi avantageusement " écrivait Plutarque dans ses Œuvres morales du 1er siècle après JC. L'artiste mosaïste Lauren Decamps adhère à cette idée et tente à sa manière de donner une nouvelle vie à ses matériaux en les taillant puis les réassemblant, créant ainsi des œuvres abstraites et figuratives.

  16. Exhibition

    CERN Multimedia

    Staff Association

    2017-01-01

    Still Life Jérémy Bajulaz Du 25 septembre au 6 octobre 2017 CERN Meyrin, Main Building (Aubergine - Jérémy Bajulaz) Né en 1991 en Haute-Savoie, France. Diplômé de l'Ecole Emile Cohl à Lyon, Jérémy Bajulaz intègre en 2014 le programme d'artiste en résidence au Centre Genevois de Gravure Contemporaine. C'est là que son travail prendra corps, autour de la lumière et de ses vibrations aux travers de sujets comme le portrait et la nature morte, dans le souci de l'observation; le regard prenant une place importante dans le processus créatif. Lauréat 2017 du VII Premio AAAC, son travail a été présenté dans de nombreuses expositions collectives, en 2015 au Bâtiment d’Art Contemporain de Genève, en 2016 au 89e Salon de Lyon et du S...

  17. Slanted stacking faults and persistent face centered cubic crystal growth in sedimentary colloidal hard sphere crystals

    NARCIS (Netherlands)

    Hilhorst, J.; Wolters, J. R.; Petukhov, A.V.

    2010-01-01

    Hard sphere crystal growth is a delicate interplay between kinetics and thermodynamics, where the former is commonly thought to favour a random hexagonal close packed structure and the latter leads to a face centered cubic crystal. In this article, we discuss the influence of slanted stacking faults

  18. Bisindeno-annulated pentacenes with exceptionally high photo-stability and ordered molecular packing: Simple synthesis by a regio-selective Scholl reaction

    KAUST Repository

    Naibi Lakshminarayana, Arun

    2015-01-01

    Bisindeno-annulated pentacenes 3a and 3b were synthesized by a simple regio-selective, FeCl3-mediated Scholl reaction from the corresponding 6,13-diaryl pentacene precursors. The fusion of two indeno-units dramatically changes the electronic properties and chemical reactivity of pentacene and the obtained compounds exhibited exceptionally high photo-stability in the solution, with a half-life time of 11.2 (3a) and 32.0 (3b) days under ambient light and air conditions. Ordered molecular packing with a small π-π stacking distance was observed in the single crystals of 3a and 3b. Our research provides a promising strategy to access stable higher order acenes with controlled molecular order. This journal is

  19. Frustrated polymer crystal structures

    Science.gov (United States)

    Lotz, B.; Strasbourg, 67083

    1997-03-01

    Several crystal structures or polymorphs of chiral or achiral polymers and biopolymers with three fold conformation of the helix have been found to conform to a common and -with one exception(Puterman, M. et al, J. Pol. Sci., Pol. Phys. Ed., 15, 805 (1977))- hitherto unsuspected packing scheme. The trigonal unit-cell contains three isochiral helices; the azimuthal setting of one helix differs significantly from that of the other two, leading to a so-called frustrated packing scheme, in which the environment of conformationally identical helices differs. Two variants of the frustrated scheme are analyzed. Similarities with frustrated two dimensional magnetic systems are underlined. Various examples of frustration in polymer crystallography are illustrated via the elucidation or reinterpretation of crystal phases or polymorphs of polyolefins, polyesters, cellulose derivatives and polypeptides. Structural manifestations (including AFM evidence) and morphological consequences of frustration are presented, which help diagnose the existence of this original packing of polymers.(Work done with L. Cartier, D. Dorset, S. Kopp, T. Okihara, M. Schumacher, W. Stocker.)

  20. Packing circles and spheres on surfaces

    KAUST Repository

    Schiftner, Alexander

    2009-12-01

    Inspired by freeform designs in architecture which involve circles and spheres, we introduce a new kind of triangle mesh whose faces\\' incircles form a packing. As it turns out, such meshes have a rich geometry and allow us to cover surfaces with circle patterns, sphere packings, approximate circle packings, hexagonal meshes which carry a torsion-free support structure, hybrid tri-hex meshes, and others. We show how triangle meshes can be optimized so as to have the incircle packing property. We explain their relation to conformal geometry and implications on solvability of optimization. The examples we give confirm that this kind of meshes is a rich source of geometric structures relevant to architectural geometry.

  1. Packing of ganglioside-phospholipid monolayers

    DEFF Research Database (Denmark)

    Majewski, J.; Kuhl, T.L.; Kjær, K.

    2001-01-01

    DPPE monolayer and does not distort the hexagonal in-plane unit cell or out-of-plane two-dimensional (2-D) packing compared with a pure DPPE monolayer. The oligosaccharide headgroups were found to extend normally from the monolayer surface, and the incorporation of these glycolipids into DPPE...... monolayers did not affect hydrocarbon tail packing (fluidization or condensation of the hydrocarbon region). This is in contrast to previous investigations of lipopolymer-lipid mixtures, where the packing structure of phospholipid monolayers was greatly altered by the inclusion of lipids bearing hydrophilic...... polymer groups. Indeed, the lack of packing disruptions by the oligosaccharide groups indicates that protein-GM, interactions, including binding, insertion, chain fluidization, and domain formation (lipid rafts), can be studied in 2-D monolayers using scattering techniques....

  2. Geometrical families of mechanically stable granular packings

    Science.gov (United States)

    Gao, Guo-Jie; Blawzdziewicz, Jerzy; O'Hern, Corey S.

    2009-12-01

    We enumerate and classify nearly all of the possible mechanically stable (MS) packings of bidipserse mixtures of frictionless disks in small sheared systems. We find that MS packings form continuous geometrical families, where each family is defined by its particular network of particle contacts. We also monitor the dynamics of MS packings along geometrical families by applying quasistatic simple shear strain at zero pressure. For small numbers of particles (N16 , we observe an increase in the period and random splittings of the trajectories caused by bifurcations in configuration space. We argue that the ratio of the splitting and contraction rates in large systems will determine the distribution of MS-packing geometrical families visited in steady state. This work is part of our long-term research program to develop a master-equation formalism to describe macroscopic slowly driven granular systems in terms of collections of small subsystems.

  3. Electroosmotic Driving Liquid Using Nanosilica Packed Column

    Institute of Scientific and Technical Information of China (English)

    Ling Xin CHEN; Guo An LUO; Tao WEN

    2005-01-01

    The electroosmotic pump (EOP) using nanosilica particles packed-bed column was experimentally studied. The relationship between flowrate, pressure and applied voltage of the pump, and pressure-flowrate (P-Q) characteristic were investigated.

  4. Packing circles and spheres on surfaces

    KAUST Repository

    Schiftner, Alexander

    2009-01-01

    Inspired by freeform designs in architecture which involve circles and spheres, we introduce a new kind of triangle mesh whose faces\\' incircles form a packing. As it turns out, such meshes have a rich geometry and allow us to cover surfaces with circle patterns, sphere packings, approximate circle packings, hexagonal meshes which carry a torsion-free support structure, hybrid tri-hex meshes, and others. We show how triangle meshes can be optimized so as to have the incircle packing property. We explain their relation to conformal geometry and implications on solvability of optimization. The examples we give confirm that this kind of meshes is a rich source of geometric structures relevant to architectural geometry. © 2009 ACM.

  5. Software For Nearly Optimal Packing Of Cargo

    Science.gov (United States)

    Fennel, Theron R.; Daughtrey, Rodney S.; Schwaab, Doug G.

    1994-01-01

    PACKMAN computer program used to find nearly optimal arrangements of cargo items in storage containers, subject to such multiple packing objectives as utilization of volumes of containers, utilization of containers up to limits on weights, and other considerations. Automatic packing algorithm employed attempts to find best positioning of cargo items in container, such that volume and weight capacity of container both utilized to maximum extent possible. Written in Common LISP.

  6. Phyllotaxis, disk packing, and Fibonacci numbers

    Science.gov (United States)

    Mughal, A.; Weaire, D.

    2017-02-01

    We consider the evolution of the packing of disks (representing the position of buds) that are introduced at the top of a surface which has the form of a growing stem. They migrate downwards, while conforming to three principles, applied locally: dense packing, homogeneity, and continuity. We show that spiral structures characterized by the widely observed Fibonacci sequence (1, 1, 2, 3, 5, 8, 13, ...), as well as related structures, occur naturally under such rules. Typical results are presented in an animation.

  7. Pharyngeal Packing during Rhinoplasty: Advantages and Disadvantages

    Directory of Open Access Journals (Sweden)

    Majid Razavi

    2015-11-01

    Full Text Available Introduction: Controversy remains as to the advantages and disadvantages of pharyngeal packing during septorhinoplasty. Our study investigated the effect of pharyngeal packing on postoperative nausea and vomiting and sore throat following this type of surgery or septorhinoplasty.   Materials and Methods: This clinical trial was performed on 90 American Society of Anesthesiologists (ASA I or II patients who were candidates for septorhinoplasty. They were randomly divided into two groups. Patients in the study group had received pharyngeal packing while those in the control group had not. The incidence of nausea and vomiting and sore throat based on the visual analog scale (VAS was evaluated postoperatively in the recovery room as well as at 2, 6 and 24 hours.   Results: The incidence of postoperative nausea and vomiting (PONV was 12.3%, with no significant difference between the study and control groups. Sore throat was reported in 50.5% of cases overall (56.8% on pack group and 44.4% on control. Although the severity of pain was higher in the study group at all times, the incidence in the two groups did not differ significantly.   Conclusion: The use of pharyngeal packing has no effect in reducing the incidence of nausea and vomiting and sore throat after surgery. Given that induced hypotension is used as the routine method of anesthesia in septorhinoplasty surgery, with a low incidence of hemorrhage and a high risk of unintended retention of pharyngeal packing, its routine use is not recommended for this procedure.

  8. Packing of elastic wires in flexible shells

    Science.gov (United States)

    Vetter, R.; Wittel, F. K.; Herrmann, H. J.

    2015-11-01

    The packing problem of long thin filaments that are injected into confined spaces is of fundamental interest for physicists and biologists alike. How linear threads pack and coil is well known only for the ideal case of rigid containers, though. Here, we force long elastic rods into flexible spatial confinement borne by an elastic shell to examine under which conditions recently acquired knowledge on wire packing in rigid spheres breaks down. We find that unlike in rigid cavities, friction plays a key role by giving rise to the emergence of two distinct packing patterns. At low friction, the wire densely coils into an ordered toroidal bundle with semi-ellipsoidal cross-section, while at high friction, it packs into a highly disordered, hierarchic structure. These two morphologies are shown to be separated by a continuous phase transition. Our findings demonstrate the dramatic impact of friction and confinement elasticity on filamentous packing and might drive future research on such systems in physics, biology and even medical technology toward including these mutually interacting effects.

  9. Voronoia: analyzing packing in protein structures.

    Science.gov (United States)

    Rother, Kristian; Hildebrand, Peter Werner; Goede, Andrean; Gruening, Bjoern; Preissner, Robert

    2009-01-01

    The packing of protein atoms is an indicator for their stability and functionality, and applied in determining thermostability, in protein design, ligand binding and to identify flexible regions in proteins. Here, we present Voronoia, a database of atomic-scale packing data for protein 3D structures. It is based on an improved Voronoi Cell algorithm using hyperboloid interfaces to construct atomic volumes, and to resolve solvent-accessible and -inaccessible regions of atoms. The database contains atomic volumes, local packing densities and interior cavities calculated for 61 318 biological units from the PDB. A report for each structure summarizes the packing by residue and atom types, and lists the environment of interior cavities. The packing data are compared to a nonredundant set of structures from SCOP superfamilies. Both packing densities and cavities can be visualized in the 3D structures by the Jmol plugin. Additionally, PDB files can be submitted to the Voronoia server for calculation. This service performs calculations for most full-atomic protein structures within a few minutes. For batch jobs, a standalone version of the program with an optional PyMOL plugin is available for download. The database can be freely accessed at: http://bioinformatics.charite.de/voronoia.

  10. Surface-Induced Optimal Packing of Two-Dimensional Molecular Networks

    Science.gov (United States)

    Copie, Guillaume; Cleri, Fabrizio; Makoudi, Younes; Krzeminski, Christophe; Berthe, Maxime; Cherioux, Frédéric; Palmino, Frank; Grandidier, Bruno

    2015-02-01

    High-density packing in organic crystals is usually associated with an increase of the coordination between molecules. Such a concept is not necessarily extended to two-dimensional molecular networks self-assembled on a solid surface, for which we demonstrate the key role of the surface in inducing the optimal packing. By a combination of scanning tunneling microscopy experiments and multiscale computer simulations, we study the phase transition between two polymorphs. We find that, contrary to intuition, the structure with the lowest packing fraction corresponds to the highest molecular coordination number, due to the competition between surface and intermolecular forces. Having the lowest free energy, this structure spreads out as the most stable polymorph over a wide range of molecular concentrations.

  11. PCR detection of psychrophilic Clostridium spp. causing 'blown pack' spoilage of vacuum-packed chilled meats.

    Science.gov (United States)

    Broda, D M; Boerema, J A; Bell, R G

    2003-01-01

    To develop a practical molecular procedure that directly, without isolation, and specifically detects the presence of clostridia which cause 'blown pack' spoilage of vacuum-packed meat. Primer sets and PCR amplification procedures were developed that detect the presence of 16S rDNA gene and/or 16S-23S rDNA internal transcribed spacer fragments of 'blown pack' causing clostridia in meat. The specificity of the developed procedures was evaluated with DNA obtained from close phylogenetic neighbours of 'blown pack' causing clostridia, food clostridia and common meat spoilage microorganisms. The sensitivity of detection was assessed in non-enriched and low-temperature-enriched beef mince inoculated with serially diluted pure cultures of Clostridium estertheticum DSMZ 8809T and Cl. gasigenes DB1AT. The efficacy of detection procedures was evaluated for naturally contaminated vacuum-packed meat samples. Three primer sets, 16SE, 16SDB and EISR, produced amplicons of the expected size with DNA templates from target clostridia, but failed to yield PCR products with DNAs from any other microorganisms tested. With 16SE and 16SDB primers, minimum levels of detection were 104 CFU g(-1) for non-enriched, and 102 CFU g(-1) for enriched meat samples. Based on the established specificity of these primers, as well as DNA sequencing of amplicons, Cl. gasigenes was confirmed as the causative agent of 'blown pack' spoilage in two packs, and Cl. estertheticum as the causative agent in the third. The developed method can be used for rapid detection of 'blown pack' causing clostridia in commercial blown packs, or following low temperature enrichment, for detection of these microorganisms in meat containing as few as 100 clostridial cells per gram. The paper reports practical procedures that can be used for rapid confirmation of the causative agents of clostridial 'blown pack' spoilage in commercial spoiled packs, or for detection of psychrophilic clostridia in epidemiological trace back of

  12. Influence of packing interactions on the average conformation of B-DNA in crystalline structures.

    Science.gov (United States)

    Tereshko, V; Subirana, J A

    1999-04-01

    The molecular interactions in crystals of oligonucleotides in the B form have been analysed and in particular the end-to-end interactions. Phosphate-phosphate interactions in dodecamers are also reviewed. A strong influence of packing constraints on the average conformation of the double helix is found. There is a strong relationship between the space group, the end-to-end interactions and the average conformation of DNA. Dodecamers must have a B-form average conformation with 10 +/- 0.1 base pairs per turn in order to crystallize in the P212121 and related space groups usually found. Decamers show a wider range of conformational variation, with 9.7-10. 6 base pairs per turn, depending on the terminal sequence and the space group. The influence of the space group in decamers is quite striking and remains unexplained. Only small variations are allowed in each case. Thus, crystal packing is strongly related to the average DNA conformation in the crystals and deviations from the average are rather limited. The constraints imposed by the crystal lattice explain why the average twist of the DNA in solution (10.6 base pairs per turn) is seldom found in oligonucleotides crystallized in the B form.

  13. Crystal structure of monomeric photosystem II from Thermosynechococcus elongatus at 3.6-a resolution.

    Science.gov (United States)

    Broser, Matthias; Gabdulkhakov, Azat; Kern, Jan; Guskov, Albert; Müh, Frank; Saenger, Wolfram; Zouni, Athina

    2010-08-20

    The membrane-embedded photosystem II core complex (PSIIcc) uses light energy to oxidize water in photosynthesis. Information about the spatial structure of PSIIcc obtained from x-ray crystallography was so far derived from homodimeric PSIIcc of thermophilic cyanobacteria. Here, we report the first crystallization and structural analysis of the monomeric form of PSIIcc with high oxygen evolution capacity, isolated from Thermosynechococcus elongatus. The crystals belong to the space group C222(1), contain one monomer per asymmetric unit, and diffract to a resolution of 3.6 A. The x-ray diffraction pattern of the PSIIcc-monomer crystals exhibit less anisotropy (dependence of resolution on crystal orientation) compared with crystals of dimeric PSIIcc, and the packing of the molecules within the unit cell is different. In the monomer, 19 protein subunits, 35 chlorophylls, two pheophytins, the non-heme iron, the primary plastoquinone Q(A), two heme groups, 11 beta-carotenes, 22 lipids, seven detergent molecules, and the Mn(4)Ca cluster of the water oxidizing complex could be assigned analogous to the dimer. Based on the new structural information, the roles of lipids and protein subunits in dimer formation of PSIIcc are discussed. Due to the lack of non-crystallographic symmetry and the orientation of the membrane normal of PSIIcc perpendicular ( approximately 87 degrees ) to the crystallographic b-axis, further information about the structure of the Mn(4)Ca cluster is expected to become available from orientation-dependent spectroscopy on this new crystal form.

  14. Fabricating colloidal crystals and construction of ordered nanostructures

    Directory of Open Access Journals (Sweden)

    Sun Zhiqiang

    2006-01-01

    Full Text Available AbstractColloidal crystals of polymeric or inorganic microspheres are of extensive interest due to their potential applications in such as sensing, optics, photonic bandgap and surface patterning. The article highlights a set of approaches developed in our group, which are efficient to prepare colloidal crystals with ordered voids, patterned colloidal crystals on non-planar surfaces, heterogeneous colloidal crystals of different building blocks, colloidal crystals composed of non-spherical polyhedrons, and colloidal crystals of non-close-packed colloidal microspheres in particular. The use of these colloidal crystals as templates for different microstructures range from nanoscale to micron-scale is also summarized.

  15. Crystal structure of {bis[(1H-benzimidazol-2-yl-κN3methyl]sulfane}dichloridomercury(II

    Directory of Open Access Journals (Sweden)

    Mehdi Bouchouit

    2015-12-01

    Full Text Available In the asymmetric unit of the title compound, [HgCl2(C16H14N4S], the HgII cation is linked to two Cl atoms and two imidazole N atoms of the chelating bis[(1H-benzimidazol-2-ylmethyl]sulfane ligand, forming a slightly distorted tetrahedral environment. The substitued imidazole rings of the ligand are almost perfectly planar [with maximum deviations of 0.017 (3 and 0.012 (3 Å] and form a dihedral angle of 42.51 (5°. The crystal packing can be described as alternating layers parallel to (010. In this arrangement, N—H...Cl hydrogen bonds between the N—H groups of the benzimidazole moieties and chloride ligands are responsible for the formation of the chain-like packing pattern along [010] exhibiting a C(6 graph-set motif.

  16. Structural searches using isopointal sets as generators: densest packings for binary hard sphere mixtures.

    Science.gov (United States)

    Hudson, Toby S; Harrowell, Peter

    2011-05-18

    Algorithms to search for crystal structures that optimize some extensive property (energy, volume, etc) typically make use of random particle reorganizations in the context of one or more numerical techniques such as simulated annealing, genetic algorithms or biased random walks, applied to the coordinates of every particle in the unit cell, together with the cell angles and lengths. In this paper we describe the restriction of such searches to predefined isopointal sets, breaking the problem into countable sub-problems which exploit crystal symmetries to reduce the dimensionality of the search space. Applying this method to the search for maximally packed mixtures of hard spheres of two sizes, we demonstrate that the densest packed structures can be identified by searches within a couple of isopointal sets. For the A(2)B system, the densest known packings over the entire tested range 0.2 < r(A)/r(B) < 2.5, including some improvements on previous optima, can all be identified by searches within a single isopointal set. In the case of the AB composition, searches of two isopointal sets generate the densest packed structures over the radius ratio range 0.2 < r(A)/r(B) < 5.0.

  17. 27 CFR 24.308 - Bottled or packed wine record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond shall...

  18. A Harmonic Algorithm for the 3D Strip Packing Problem

    NARCIS (Netherlands)

    N. Bansal (Nikhil); X. Han; K. Iwama; M. Sviridenko; G. Zhang (Guochuan)

    2013-01-01

    htmlabstractIn the three-dimensional (3D) strip packing problem, we are given a set of 3D rectangular items and a 3D box $B$. The goal is to pack all the items in $B$ such that the height of the packing is minimized. We consider the most basic version of the problem, where the items must be packed

  19. 48 CFR 1846.672-6 - Packing list instructions.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Packing list instructions... ADMINISTRATION CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1846.672-6 Packing list instructions. Copies of the MIRR may be used as a packing list. The packing list copies shall...

  20. 46 CFR 160.043-6 - Marking and packing.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Marking and packing. 160.043-6 Section 160.043-6... Marking and packing. (a) General. Jackknives specified by this subpart shall be stamped or otherwise... opener. (c) Packing. Each jackknife, complete with lanyard attached, shall be packed in a heat-sealed...

  1. Packing parameters effect on injection molding of polypropylene nanostructured surfaces

    DEFF Research Database (Denmark)

    Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard

    2012-01-01

    having a diameter of 500 nm was employed. The tool insert surface was produced using chemical-based-batch techniques such aluminum anodization and nickel electroplating. During the injection molding process, polypropylene (PP) was employed as material and packing phase parameters (packing time, packing...... to the polymer part was mainly influenced by packing pressure level and distance from the gate....

  2. The World of Virtual Exhibitions

    Directory of Open Access Journals (Sweden)

    Irena Eiselt

    2013-09-01

    Full Text Available EXTENDED ABSTRACTSpecial collections of the National and University Library (NUK hide a lot of items of precious value. The Slovenian cultural heritage is stored on paper or on other media as a part of the library’s Manuscripts, Incunabula and Rare Books Collection, Old Prints Collection, Maps and Pictorial Collection, Music Collection, Ephemera Collection, Serials Collection, and Slovenian Diaspora Publications Collection. Only a small part of the treasures is temporary revealed to the public on special exhibitions. The idea of virtual exhibitions of library treasures was born in 2005. The library aimed to exhibit precious items of special collections of high historical or artistic value. In 2008 the first two virtual exhibitions were created in-house offering access to the rich collections of old postcards of Ljubljana at the beginning of 20th century kept in the Maps and Pictorial Collection of NUK. They were soon followed by other virtual exhibitions. At the beginning they were organised in the same way as physical exhibitions, afterwards different programs were used for creation of special effects (for ex. 3D wall. About two years ago it was decided that the creation of virtual exhibitions will be simplified. Files of digitised and borndigital library materials in jpg format are imported to MS PowerPoint 2010. Each jpg file is now formatted by adding a frame, a description … to the slides which are saved as jpg files. The last step is the import of jpg files into Cooliris application used for NUK web exhibitions. In the paper the virtual exhibition design and creation, the technical point of view and criteria for the selection of exhibition content are explained following the example of the virtual exhibitions the Old Postcards of Ljubljana, Photo Ateliers in Slovenia, a collection of photographs Four Seasons by Fran Krašovec and photos of Post-Earthquake Ljubljana in 1895.

  3. The close-packed triple helix as a possible new structural motif for collagen

    CERN Document Server

    Bohr, Jakob

    2010-01-01

    The one-dimensional problem of selecting the triple helix with the highest volume fraction is solved and hence the condition for a helix to be close-packed is obtained. The close-packed triple helix is shown to have a pitch angle of $v_{CP} =43.3 ^\\circ$. Contrary to the conventional notion, we suggest that close packing form the underlying principle behind the structure of collagen, and the implications of this suggestion are considered. Further, it is shown that the unique zero-twist structure with no strain-twist coupling is practically identical to the close-packed triple helix. Some of the difficulties for the current understanding of the structure of collagen are reviewed: The ambiguity in assigning crystal structures for collagen-like peptides, and the failure to satisfactorily calculate circular dichroism spectra. Further, the proposed new geometrical structure for collagen is better packed than both the 10/3 and the 7/2 structure. A feature of the suggested collagen structure is the existence of a ce...

  4. Efficient linear programming algorithm to generate the densest lattice sphere packings.

    Science.gov (United States)

    Marcotte, Étienne; Torquato, Salvatore

    2013-06-01

    Finding the densest sphere packing in d-dimensional Euclidean space R(d) is an outstanding fundamental problem with relevance in many fields, including the ground states of molecular systems, colloidal crystal structures, coding theory, discrete geometry, number theory, and biological systems. Numerically generating the densest sphere packings becomes very challenging in high dimensions due to an exponentially increasing number of possible sphere contacts and sphere configurations, even for the restricted problem of finding the densest lattice sphere packings. In this paper we apply the Torquato-Jiao packing algorithm, which is a method based on solving a sequence of linear programs, to robustly reproduce the densest known lattice sphere packings for dimensions 2 through 19. We show that the TJ algorithm is appreciably more efficient at solving these problems than previously published methods. Indeed, in some dimensions, the former procedure can be as much as three orders of magnitude faster at finding the optimal solutions than earlier ones. We also study the suboptimal local density-maxima solutions (inherent structures or "extreme" lattices) to gain insight about the nature of the topography of the "density" landscape.

  5. Quasistatic packings of droplets in flat microfluidic channels

    Science.gov (United States)

    Kadivar, Erfan

    2016-02-01

    As observed in recent experiments, monodisperse droplets self-assemble spontaneously in different ordered packings. In this work, we present a numerical study of the droplet packings in the flat rectangular microfluidic channels. Employing the boundary element method, we numerically solve the Stokes equation in two-dimension and investigate the appearance of droplet packing and transition between one and two-row packings of monodisperse emulsion droplets. By calculating packing force applied on the droplet interface, we investigate the effect of flow rate, droplet size, and surface tension on the packing configurations of droplets and transition between different topological packings.

  6. Direct contact condensation in packed beds

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yi; Klausner, James F.; Mei, Renwei; Knight, Jessica [Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611 (United States)

    2006-12-15

    A diffusion driven desalination process was recently described where a very effective direct contact condenser with a packed bed is used to condense water vapor out of an air/vapor mixture. A laboratory scale direct contact condenser has been fabricated as a twin tower structure with two stages, co-current and countercurrent. Experiments have been operated in each stage with respective saturated air inlet temperatures of 36, 40 and 43{sup o}C. The temperature and humidity data have been collected at the inlet and exit of the packed bed for different water to air mass flow ratios that vary between 0 and 2.5. A one-dimensional model based on conservation principles has been developed, which predicts the variation of temperature, humidity, and condensation rate through the condenser stages. Agreement between the model and experiments is very good. It is observed that the countercurrent flow stage condensation effectiveness is significantly higher than that for the co-current stage. The condensation heat and mass transfer rates were found to decrease when water blockages occur within the packed bed. Using high-speed digital cinematography, it was observed that this problem can occur at any operating condition, and is dependent on the packing surface wetting characteristics. This observation is used to explain the requirement for two different empirical constants, depending on packing diameter, suggested by Onda for the air side mass transfer coefficient correlation. (author)

  7. Perfect arborescence packing in preflow mincut graphs

    Energy Technology Data Exchange (ETDEWEB)

    Gabow, H.N. [Univ. of Colorado, Boulder, CO (United States)

    1996-12-31

    In a digraph with distinguished vertex a, for any vertex v {ne} a let {lambda}(v) equal the value of a maximum flow from a to v. A perfect packing of a-arborescences contains each vertex in {lambda}(v) arborescences and contains some fixed vertex in every arborescence. Determining if an arbitrary graph has a perfect packing is NP-complete. We present the most general known condition that guarantees the existence of a perfect packing: each vertex v {ne} a is separated from a by a set that has in-degree {lambda}(v) and out-degree no greater. This result is based on other useful properties of such graphs, e.g., they always have a pair of edges that can be {open_quotes}split off{close_quotes} preserving, values. We show a perfect packing can be found in O(nm{sup 2}) time, where n (m) is the number of vertices (edges). If the graph has a capacity function the time is the same as computing O(n{sup 2}) maximum network flows. We also show a preflow mincut graph has a fractional perfect packing using only m + n - 2 distinct arborescences.

  8. Coalescence preference in dense packing of bubbles

    Science.gov (United States)

    Kim, Yeseul; Gim, Bopil; Gim, Bopil; Weon, Byung Mook

    2015-11-01

    Coalescence preference is the tendency that a merged bubble from the contact of two original bubbles (parent) tends to be near to the bigger parent. Here, we show that the coalescence preference can be blocked by densely packing of neighbor bubbles. We use high-speed high-resolution X-ray microscopy to clearly visualize individual coalescence phenomenon which occurs in micro scale seconds and inside dense packing of microbubbles with a local packing fraction of ~40%. Previous theory and experimental evidence predict a power of -5 between the relative coalescence position and the parent size. However, our new observation for coalescence preference in densely packed microbubbles shows a different power of -2. We believe that this result may be important to understand coalescence dynamics in dense packing of soft matter. This work (NRF-2013R1A22A04008115) was supported by Mid-career Researcher Program through NRF grant funded by the MEST and also was supported by Ministry of Science, ICT and Future Planning (2009-0082580) and by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry and Education, Science and Technology (NRF-2012R1A6A3A04039257).

  9. Close packing density of polydisperse hard spheres.

    Science.gov (United States)

    Farr, Robert S; Groot, Robert D

    2009-12-28

    The most efficient way to pack equally sized spheres isotropically in three dimensions is known as the random close packed state, which provides a starting point for many approximations in physics and engineering. However, the particle size distribution of a real granular material is never monodisperse. Here we present a simple but accurate approximation for the random close packing density of hard spheres of any size distribution based upon a mapping onto a one-dimensional problem. To test this theory we performed extensive simulations for mixtures of elastic spheres with hydrodynamic friction. The simulations show a general (but weak) dependence of the final (essentially hard sphere) packing density on fluid viscosity and on particle size but this can be eliminated by choosing a specific relation between mass and particle size, making the random close packed volume fraction well defined. Our theory agrees well with the simulations for bidisperse, tridisperse, and log-normal distributions and correctly reproduces the exact limits for large size ratios.

  10. Acoustic cloaking by a near-zero-index phononic crystal

    KAUST Repository

    Zheng, Li-Yang

    2014-04-21

    Zero-refractive-index materials may lead to promising applications in various fields. Here, we design and fabricate a near Zero-Refractive-Index (ZRI) material using a phononic crystal (PC) composed of a square array of densely packed square iron rods in air. The dispersion relation exhibits a nearly flat band across the Brillouin zone at the reduced frequency f  = 0.5443c/a, which is due to Fabry-Perot (FP) resonance. By using a retrieval method, we find that both the effective mass density and the reciprocal of the effective bulk modulus are close to zero at frequencies near the flat band. We also propose an equivalent tube network model to explain the mechanisms of the near ZRI effect. This FP-resonance-induced near ZRI material offers intriguing wave manipulation properties. We demonstrate both numerically and experimentally its ability to shield a scattering obstacle and guide acoustic waves through a bent structure.

  11. Deterioration of organic packing materials commonly used in air biofiltration: effect of VOC-packing interactions.

    Science.gov (United States)

    Lebrero, Raquel; Estrada, José M; Muñoz, Raúl; Quijano, Guillermo

    2014-05-01

    The abiotic deterioration of three conventional organic packing materials used in biofiltration (compost, wood bark and Macadamia nutshells) caused by their interaction with toluene (used as a model volatile organic compound) was here studied. The deterioration of the materials was evaluated in terms of structural damage, release of co-substrates and increase of the packing biodegradability. After 21 days of exposure to toluene, all packing materials released co-substrates able to support microbial growth, which were not released by the control materials not exposed to toluene. Likewise, the exposure to toluene increased the packing material biodegradability by 26% in wood bark, 20% in compost and 17% in Macadamia nutshells. Finally, scanning electron microscopy analysis confirmed the deterioration in the structure of the packing materials evaluated due to the exposure to toluene, Macadamia nutshells being the material with the highest resistance to volatile organic compound attack.

  12. Crystal structure of pseudoguainolide

    Directory of Open Access Journals (Sweden)

    Noureddine Beghidja

    2015-03-01

    Full Text Available The lactone ring in the title molecule, C15H22O3 (systematic name: 3,4a,8-trimethyldodecahydroazuleno[6,5-b]furan-2,5-dione, assumes an envelope conformation with the methine C atom adjacent to the the methine C atom carrying the methyl substituent being the flap atom. The other five-membered ring adopts a twisted conformation with the twist being about the methine–methylene C—C bond. The seven-membered ring is based on a twisted boat conformation. No specific interactions are noted in the the crystal packing.

  13. Tuning the crystal polymorphs of organic semiconductor towards high performance organic transistors (Conference Presentation)

    Science.gov (United States)

    Zhen, Yonggang; He, Ping; Yi, Yuanping; Hu, Wenping

    2016-11-01

    Generally, the differences in crystal polymorph exhibit different narrow band structures, electron-phonon coupling, optoelectronic characteristics and charge transport properties, thus leading to different device performances of organic semiconductors for application in organic field-effect transistors (OFETs). Nowadays it still remains a big challenge to control organic crystal polymorph because the slight non-directional intermolecular interactions lead to the very small differences instructure and energy of cystal phases with several alternative packing arrangements. Therefore, the control of the crystal polymorphism towards high device performance has become a crucial issue in the field of organic semiconductors. Thienoacenes have been intensively investigated as very promising organic semiconductors with high stability and superior mobility for OFETs in the last decade. However, scare studies focused on the crystal polymorph of thienoacenes. Herein, we report the controllable growth of different crystal phases of dihexyl-substituted dibenzo[d,d']thieno[3,2-b;4,5-b']dithiophene (C6-DBTDT), which was synthesized in a new, facile and efficient method. Furthermore, OFETs based on microribbon-shaped β phase crystals showed the hole mobility up to 18.9 cm2 V-1 s-1, which is one of the highest value for p-type organic semiconductors measured under ambient conditions, while platelet-shaped α phase crystals displayed the lower hole mobility of 8.5 cm2 V-1 s-1. We clearly demonstrated that the selective growth of different crystal polymorph for C6-DBTDT can be achieved by using different substrate and solvents. The simple drop-cast fabrication with controllable crystal phase and air operation stability would open the possibility of thienoacene derivatives in the construction of micro- and nanoelectronics.

  14. Safety considerations for fabricating lithium battery packs

    Science.gov (United States)

    Ciesla, J. J.

    1986-09-01

    Lithium cell safety is a major issue with both manufacturers and end users. Most manufacturers have taken great strides to develop the safest cells possible while still maintaining performance characteristics. The combining of lithium cells for higher voltages, currents, and capacities requires the fabricator of lithium battery packs to be knowledgable about the specific electrochemical system being used. Relatively high rate, spirally wound (large surface area) sulfur oxychloride cells systems, such as Li/Thionyl or Sulfuryl chloride are considered. Prior to the start of a design of a battery pack, a review of the characterization studies for the cells should be conducted. The approach for fabricating a battery pack might vary with cell size.

  15. Generalized network improvement and packing problems

    CERN Document Server

    Holzhauser, Michael

    2016-01-01

    Michael Holzhauser discusses generalizations of well-known network flow and packing problems by additional or modified side constraints. By exploiting the inherent connection between the two problem classes, the author investigates the complexity and approximability of several novel network flow and packing problems and presents combinatorial solution and approximation algorithms. Contents Fractional Packing and Parametric Search Frameworks Budget-Constrained Minimum Cost Flows: The Continuous Case Budget-Constrained Minimum Cost Flows: The Discrete Case Generalized Processing Networks Convex Generalized Flows Target Groups Researchers and students in the fields of mathematics, computer science, and economics Practitioners in operations research and logistics The Author Dr. Michael Holzhauser studied computer science at the University of Kaiserslautern and is now a research fellow in the Optimization Research Group at the Department of Mathematics of the University of Kaiserslautern.

  16. Wolf Pack Algorithm for Unconstrained Global Optimization

    Directory of Open Access Journals (Sweden)

    Hu-Sheng Wu

    2014-01-01

    Full Text Available The wolf pack unites and cooperates closely to hunt for the prey in the Tibetan Plateau, which shows wonderful skills and amazing strategies. Inspired by their prey hunting behaviors and distribution mode, we abstracted three intelligent behaviors, scouting, calling, and besieging, and two intelligent rules, winner-take-all generation rule of lead wolf and stronger-survive renewing rule of wolf pack. Then we proposed a new heuristic swarm intelligent method, named wolf pack algorithm (WPA. Experiments are conducted on a suit of benchmark functions with different characteristics, unimodal/multimodal, separable/nonseparable, and the impact of several distance measurements and parameters on WPA is discussed. What is more, the compared simulation experiments with other five typical intelligent algorithms, genetic algorithm, particle swarm optimization algorithm, artificial fish swarm algorithm, artificial bee colony algorithm, and firefly algorithm, show that WPA has better convergence and robustness, especially for high-dimensional functions.

  17. SPATIAL STATISTICS FOR SIMULATED PACKINGS OF SPHERES

    Directory of Open Access Journals (Sweden)

    Alexander Bezrukov

    2011-05-01

    Full Text Available This paper reports on spatial-statistical analyses for simulated random packings of spheres with random diameters. The simulation methods are the force-biased algorithm and the Jodrey-Tory sedimentation algorithm. The sphere diameters are taken as constant or following a bimodal or lognormal distribution. Standard characteristics of spatial statistics are used to describe these packings statistically, namely volume fraction, pair correlation function of the system of sphere centres and spherical contact distribution function of the set-theoretic union of all spheres. Furthermore, the coordination numbers are analysed.

  18. Imaging of drug smuggling by body packing.

    Science.gov (United States)

    Sica, Giacomo; Guida, Franco; Bocchini, Giorgio; Iaselli, Francesco; Iadevito, Isabella; Scaglione, Mariano

    2015-02-01

    Body packing, pushing, and stuffing are hazardous practices with complex medicolegal and social implications. A radiologist plays both a social and a medicolegal role in their assessment, and it should not be limited only to the identification of the packages but must also provide accurate information about their number and their exact location so as to prevent any package remains in the body packer. Radiologists must also be able to recognize the complications associated with these risky practices. Imaging assessment of body packing is performed essentially through plain abdominal X-ray and computed tomography scans. Ultrasound and magnetic resonance imaging, although with some advantages, actually have a limited use.

  19. Packing Transitions in Nanosized Li Clusters

    CERN Document Server

    Sung, M W; Weare, J H; Sung, Ming Wen; Kawai, Ryoichi; Weare, John H.

    1994-01-01

    Packing transitions in the lowest energy structures of Li clusters as a function of size have been identified via simulated annealing. For N>21, the large $p$ character of Li leads to unexpected ionic structures. At N~25, a packing pattern based on interpenetrating 13-atom icosahedra and similar to that of Na and K appears. This pattern persists until at N=55, where another transition to a structure based on a Mackay icosahedron occurs. For clusters of size 55 and 147, the optimized FCC structure representative of the bulk is still slightly higher in energy than the optimal MIC. (RK-94-03)

  20. Lattice approaches to packed column simulations

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This work presents a review of the findings into the ability of a digitally based particle packing algorithm, called DigiPac, to predict bed structure in a variety of packed columns, for a range of generic pellet shapes frequently used in the chemical and process engineering industries.Resulting macroscopic properties are compared with experimental data derived from both invasive and non-destructive measurement techniques.Additionally, fluid velocity distributions, through samples of the resulting bed structures, are analysed using lattice Boltzmann method (LBM) simulations and are compared against experimental data from the literature.

  1. Non-Crystallographic Symmetry in Packing Spaces

    Directory of Open Access Journals (Sweden)

    Valery G. Rau

    2013-01-01

    Full Text Available In the following, isomorphism of an arbitrary finite group of symmetry, non-crystallographic symmetry (quaternion groups, Pauli matrices groups, and other abstract subgroups, in addition to the permutation group, are considered. Application of finite groups of permutations to the packing space determines space tilings by policubes (polyominoes and forms a structure. Such an approach establishes the computer design of abstract groups of symmetry. Every finite discrete model of the real structure is an element of symmetry groups, including non-crystallographic ones. The set packing spaces of the same order N characterizes discrete deformation transformations of the structure.

  2. Auto Technology Exhibition in Tianjing

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ The 4th International Automotive Technology Exhibition Tianjing2009,jointly hosted by the Society of Automotive Engineers of China(SAE-China),China Automotive Technology and Research Center(CATRC)and Tianjin Economic-Technological Development Area(TETD),is to be held in Tianjin Binhai International Convention and Exhibition Center from August 27 to August 30 this year.In line with China's national 11th Five-year Plan,The Automobile Industry Revitalization and Adjustments Planning and The Equipment Manufacturing Revitalization and Adjustments Planning,this Exhibition,centered on the theme of automobile and equipment manufacturing,arranges the exhibition halls respectively for private autos,commercial autos and equipment manufacturing etc.

  3. Photowalk Exhibition opens at Microcosm

    CERN Document Server

    Katarina Anthony

    2011-01-01

    The winning photographs from the 2010 Global Particle Physics Photowalk competition will go on display at Microcosm from 11 February to 2 April. The exhibition is part of a global photography event taking place over three continents, with Photowalk exhibitions opening simultaneously at Fermilab in the US, KEK in Japan and here at CERN.   DESY wire chamber - First place people's choice; second place global jury competition. Photographer: Hans-Peter Hildebrandt  If you were one of the 1,300 photography lovers who voted in last year’s Photowalk competition, this exhibition is your chance to see the winning entries in print. The exhibition will take place in the downstairs gallery of Microcosm, overlooking the garden. 15 photographs will be on display, with each of the laboratories that participated in Photowalk represented by their 3 winning entries. Among them will be the “people’s choice” sunburst photo of a particle detector at DESY (Photo 1), and...

  4. Globe exhibit wins international acclaim

    CERN Multimedia

    Katarina Anthony

    2011-01-01

    The Globe’s “Universe of Particles” exhibition has recently received four prestigious awards for its avant-garde design. This external praise is great encouragement for the CERN exhibitions currently on the drawing board.   The Universe of Particles exhibition has won 4 awards for its avant-garde design. Back in 2008, the design company Atelier Brückner was presented with a challenge: to design the layout of a new permanent exhibition for CERN, one that would epitomize both the Organization and its research. The brief was concise but complex: the exhibit had to be symbolic of the Organization, use modern technology, engage and immerse visitors, and, preferably, use touch-screen technology. With the help of IArt, an interactive technology firm, and based on the content provided by CERN’s Education Group, Atelier Brückner developed the “Universe of Particles” exhibit as it is today. Its principal concept centred on the s...

  5. Greenhouse Earth: A Traveling Exhibition

    Energy Technology Data Exchange (ETDEWEB)

    Booth, W.H.; Caesar, S.

    1992-09-01

    The Franklin Institute Science Museum provided an exhibit entitled the Greenhouse Earth: A Traveling Exhibition. This 3500 square-foot exhibit on global climate change was developed in collaboration with the Association of Science-Technology Centers. The exhibit opened at The Franklin Institute on February 14, 1992, welcoming 291,000 visitors over its three-month stay. During its three-year tour, Greenhouse Earth will travel to ten US cities, reaching two million visitors. Greenhouse Earth aims to deepen public understanding of the scientific issues of global warming and the conservation measures that can be taken to slow its effects. The exhibit features hands-on exhibitry, interactive computer programs and videos, a theater production, a demonstration cart,'' guided tours, and lectures. supplemental educational programs at the Institute included a teachers preview, a symposium on climate change, and a satellite field trip.'' The development of Greenhouse Earth included front-end and formative evaluation procedures. Evaluation includes interviews with visitors, prototypes, and summative surveys for participating museums. During its stay in Philadelphia, Greenhouse Earth was covered by the local and national press, with reviews in print and broadcast media. Greenhouse Earth is the first large-scale museum exhibit to address global climate change.

  6. Crystal engineering: A brief overview

    Indian Academy of Sciences (India)

    Gautam R Desiraju

    2010-09-01

    Crystal structures of organic and metal-organic compounds have been determined in enormous numbers over the past century, and at the time of writing this review, the Cambridge Structural Database has just crossed the half million mark. The possibility of designing a particular crystal packing is, however, of more recent origin and the subject of crystal engineering has addressed this possibility, more or less systematically, during the past 30 years. Crystal engineering demands a detailed and thorough knowledge of intermolecular interactions, which act as the supramolecular glue that binds molecules into crystals. It also requires systematic strategies for the design of a crystal, the architectural blueprint as it were. Finally, this enterprise needs to be geared towards a useful property in that the crystal that is being designed is a functional one. All these features of the subject are directly or indirectly connected with the fact that there is a very large database of known crystal structures that is available to the crystal engineer. This review attempts to briefly survey the current scenario in this expanding subject.

  7. Structural colours through photonic crystals

    Energy Technology Data Exchange (ETDEWEB)

    McPhedran, R.C.; Nicorovici, N.A.; McKenzie, D.R.; Rouse, G.W.; Botten, L.C.; Welch, V.; Parker, A.R.; Wohlgennant, M.; Vardeny, V

    2003-10-01

    We discuss two examples of living creatures using photonic crystals to achieve iridescent colouration. The first is the sea mouse (Aphroditidae, Polychaeta), which has a hexagonal close packed structure of holes in its spines and lower-body felt, while the second is the jelly fish Bolinopsis infundibulum, which has an oblique array of high index inclusions in its antennae. We show by measurements and optical calculations that both creatures can achieve strong colours despite having access only to weak refractive index contrast.

  8. Crystals in crystals

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Schmidt, I.; Carlsson, A.;

    2005-01-01

    A major factor governing the performance of catalytically active particles supported on a zeolite carrier is the degree of dispersion. It is shown that the introduction of noncrystallographic mesopores into zeolite single crystals (silicalite-1, ZSM-5) may increase the degree of particle dispersion...... of the zeolite particles, particularly after thermal treatment. When using mesoporous zeolites, the particles were evenly distributed throughout the mesopore system of the zeolitic support, even after calcination, leading to nanocrystals within mesoporous zeolite single crystals....

  9. Fabrication of silica/zinc oxide core-shell colloidal photonic crystals

    Science.gov (United States)

    Ma, Xiying; Shi, Weilin; Yan, Zhijun; Shen, Baoping

    2007-07-01

    We have fabricated three-dimensional ZnO photonic crystals by the self-assembly of SiO2/ZnO core-shell microspheres of diameter 180-220 nm by means of a vertical deposition method. The organized crystals adopt a uniform close-packed hexagonal structure with long-range order and a high filling fraction. They exhibit strong partial photonic band gaps at 565-688 nm in the transmission spectrum and a broadened band edge emission at 383 nm in the photoluminescence spectrum. For comparison with these ZnO photonic crystals, we have also prepared pure silica crystals of the same dimensions. The photonic band gaps of the former have been found to be shifted to a longer wavelength by about 200 nm compared to those of the latter as a result of the higher refractive index of ZnO. This approach provides an efficient, economical alternative means of obtaining other, more complicated photonic crystals.

  10. Computational Modelling of Particle Packing in Concrete

    NARCIS (Netherlands)

    He, H.

    2010-01-01

    Physical particle packing is becoming a hot topic in concrete technology as more and more types of granular materials are used in concrete either for ecological or for engineering purposes. Although various analytical methods have been developed for optimum mixture design, comprehensive information

  11. Improved Lower Bound for Online Strip Packing

    NARCIS (Netherlands)

    Harren, Rolf; Kern, Walter

    We study the online strip packing problem and derive an improved lower bound of Ͽ ≥ 2.589... for the competitive ratio of this problem. The construction is based on modified “Brown-Baker-Katseff sequences‿ (Brown et al. in Acta Inform. 18:207–225, 1982) using only two types of rectangles. In

  12. Indexing Volumetric Shapes with Matching and Packing.

    Science.gov (United States)

    Koes, David Ryan; Camacho, Carlos J

    2015-04-01

    We describe a novel algorithm for bulk-loading an index with high-dimensional data and apply it to the problem of volumetric shape matching. Our matching and packing algorithm is a general approach for packing data according to a similarity metric. First an approximate k-nearest neighbor graph is constructed using vantage-point initialization, an improvement to previous work that decreases construction time while improving the quality of approximation. Then graph matching is iteratively performed to pack related items closely together. The end result is a dense index with good performance. We define a new query specification for shape matching that uses minimum and maximum shape constraints to explicitly specify the spatial requirements of the desired shape. This specification provides a natural language for performing volumetric shape matching and is readily supported by the geometry-based similarity search (GSS) tree, an indexing structure that maintains explicit representations of volumetric shape. We describe our implementation of a GSS tree for volumetric shape matching and provide a comprehensive evaluation of parameter sensitivity, performance, and scalability. Compared to previous bulk-loading algorithms, we find that matching and packing can construct a GSS-tree index in the same amount of time that is denser, flatter, and better performing, with an observed average performance improvement of 2X.

  13. An approximation algorithm for square packing

    NARCIS (Netherlands)

    R. van Stee (Rob)

    2004-01-01

    textabstractWe consider the problem of packing squares into bins which are unit squares, where the goal is to minimize the number of bins used. We present an algorithm for this problem with an absolute worst-case ratio of 2, which is optimal provided P != NP.

  14. Optimal online bounded space multidimensional packing

    NARCIS (Netherlands)

    L. Epstein (Lea); R. van Stee (Rob)

    2003-01-01

    textabstractWe solve an open problem in the literature by providing an online algorithm for multidimensional bin packing that uses only bounded space. We show that it is optimal among bounded space algorithms for any dimension $d>1$. Its asymptotic performance ratio is $(Pi_{infty})^d$, where

  15. Computational Modelling of Particle Packing in Concrete

    NARCIS (Netherlands)

    He, H.

    2010-01-01

    Physical particle packing is becoming a hot topic in concrete technology as more and more types of granular materials are used in concrete either for ecological or for engineering purposes. Although various analytical methods have been developed for optimum mixture design, comprehensive information

  16. Bacteriological Survey of AFD (Meat Packing Plant

    Directory of Open Access Journals (Sweden)

    T. N. Rawal

    1974-04-01

    Full Text Available The paper describes the manufacturing process of freeze dried mutton from slaughtering to packing and makes an assessment of microbial build-up on equipment, hands of workers and environment in which the mutton comes in contact during processing.

  17. Bin Packing via Discrepancy of Permutations

    CERN Document Server

    Eisenbrand, Friedrich; Rothvoß, Thomas

    2010-01-01

    A well studied special case of bin packing is the 3-partition problem, where n items of size >1/4 have to be packed in a minimum number of bins of capacity one. The famous Karmarkar-Karp algorithm transforms a fractional solution of a suitable LP relaxation for this problem into an integral solution that requires at most O(log n) additional bins. The three-permutations-conjecture of Beck is the following. Given any 3 permutations on n symbols, one can color the symbols red and blue, such that in any interval of any of those permutations, the number of red and blue symbols differs only by a constant. Beck's conjecture is well known in the field of discrepancy theory. We establish a surprising connection between bin packing and Beck's conjecture: If the latter holds true, then the additive integrality gap of the 3-partition linear programming relaxation is bounded by a constant. This result indicates that improving approximability results for bin packing requires a better understanding of discrepancy theory.

  18. Simple Cloud Chambers Using Gel Ice Packs

    Science.gov (United States)

    Kamata, Masahiro; Kubota, Miki

    2012-01-01

    Although cloud chambers are highly regarded as teaching aids for radiation education, school teachers have difficulty in using cloud chambers because they have to prepare dry ice or liquid nitrogen before the experiment. We developed a very simple and inexpensive cloud chamber that uses the contents of gel ice packs which can substitute for dry…

  19. 7 CFR 920.13 - Pack.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Pack. 920.13 Section 920.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE KIWIFRUIT GROWN IN CALIFORNIA...

  20. Hardness of approximation for strip packing

    DEFF Research Database (Denmark)

    Adamaszek, Anna Maria; Kociumaka, Tomasz; Pilipczuk, Marcin

    2017-01-01

    [SODA 2016] have recently proposed a (1.4 + ϵ)-approximation algorithm for this variant, thus showing that strip packing with polynomially bounded data can be approximated better than when exponentially large values are allowed in the input. Their result has subsequently been improved to a (4/3 + ϵ...

  1. Exhibition - Mathematics, A Beautiful Elsewhere

    CERN Multimedia

    2011-01-01

    From 21 October 2011 to 18 March 2012, the Fondation Cartier pour l’art contemporain will present the exhibition Mathematics: A Beautiful Elsewhere, an exhibition developed in association with the Institut des Hautes Études Scientifiques (IHÉS) and under the patronage of UNESCO. For this unprecedented event, the foundation invited mathematicians to work with artists with whom it has previously worked to create an exhibition that allows visitors to see, hear, do, interpret and think about mathematics. By bringing mathematics into its premises, the Fondation Cartier is itself undergoing the “sudden change of scenery” described by mathematician Alexandre Grothendieck. More information is available here. Fondation Cartier pour l’art contemporain 261, boulevard Raspail 75014 Paris http://fondation.cartier.com Private Visit For professors, researchers and all the staff of Mathematics departments...

  2. Barrier properties of k-mer packings

    Science.gov (United States)

    Lebovka, N.; Khrapatiy, S.; Vygornitskyi; Pivovarova, N.

    2014-08-01

    This work discusses numerical studies of the barrier properties of k-mer packings by the Monte Carlo method. The studied variants of regular and non-regular arrangements on a square lattice included models of random sequential adsorption (RSA) and random deposition (RD). The discrete problem of diffusion through the bonds of a square lattice was considered. The k-mers were perfectly oriented perpendicular to the diffusion direction and blocked certain fraction of bonds fb against diffusion. The barrier efficiency was estimated by calculation of the ratio D/Do where D is diffusion coefficient in direction perpendicular to the orientation of k-mers and Do is the same value for diffusion on the square lattice without blocked bonds, i.e., at fb=0. The value of k varied from 1 to 512 and different lattice sizes up to L=8192 lattice units were used. For dense packings (p=1), the obtained D/Do versus fb dependences deviated from the theoretical prediction of effective medium (EM) theory and deviation was the most obvious for the regular non-staggered arrangement. For loose RSA and RD packings, the percolation like-behavior of D/Do with threshold at fb=p∞ was observed and the data evidenced that their barrier properties at large values of k may be more effective than those of some dense packings. Such anomalous behavior can reflect the details of k-mer spatial organization (aggregation) and structure of pores in RD and RSA packings. The contradictions between simulation data and predictions of EM theory were also discussed.

  3. Insight to the thermodynamic stability of molecular crystals through crystallographic studies of a multipolymorph system.

    Science.gov (United States)

    Ng, Alicia T; Lai, Chiajen; Dabros, Marta; Gao, Qi

    2014-11-01

    Five solvent-free polymorphs of a pharmaceutical compound were discovered during polymorph screening. Out of the five polymorphs, only one has strong intermolecular N-H···N hydrogen bonding, whereas the others exhibit only weak C-H···N and π-π stacking interactions in addition to all the other weak C-H···X and van der Waals interactions. The relative thermodynamic stability relationships among the polymorphs are not intuitive and quite complex due to enantiotropic phase behavior. For instance, the polymorph with the most efficient packing (i.e., highest density) is not always the most thermodynamically stable form, and the polymorph with strong intermolecular interactions is not thermodynamically more stable than the polymorph with weak intermolecular interactions at all temperatures. Nevertheless, systematic examination and comparison of the molecular packing and intermolecular interactions of these polymorphs provide insight into the importance of H-bonding and packing efficiency to the thermodynamic stability of a crystalline form, and how these effects are dependent on temperature. This study seeks to correlate single-crystal structure features with experimentally established thermodynamic stability, and provides an example where a polymorph with only van der Waals forces and weak intermolecular interactions can be more stable than a polymorph that displays strong H-bonding in its structural make-up.

  4. Modified strip packing heuristics for the rectangular variable-sized bin packing problem

    Directory of Open Access Journals (Sweden)

    FG Ortmann

    2010-06-01

    Full Text Available Two packing problems are considered in this paper, namely the well-known strip packing problem (SPP and the variable-sized bin packing problem (VSBPP. A total of 252 strip packing heuristics (and variations thereof from the literature, as well as novel heuristics proposed by the authors, are compared statistically by means of 1170 SPP benchmark instances in order to identify the best heuristics in various classes. A combination of new heuristics with a new sorting method yields the best results. These heuristics are combined with a previous heuristic for the VSBPP by the authors to find good feasible solutions to 1357 VSBPP benchmark instances. This is the largest statistical comparison of algorithms for the SPP and the VSBPP to the best knowledge of the authors.

  5. Synthesis of hexagonal close-packed gold nanostructures.

    Science.gov (United States)

    Huang, Xiao; Li, Shaozhou; Huang, Yizhong; Wu, Shixin; Zhou, Xiaozhu; Li, Shuzhou; Gan, Chee Lip; Boey, Freddy; Mirkin, Chad A; Zhang, Hua

    2011-01-01

    Solid gold is usually most stable as a face-centred cubic (fcc) structure. To date, no one has synthesized a colloidal form of Au that is exclusively hexagonal close-packed (hcp) and stable under ambient conditions. Here we report the first in situ synthesis of dispersible hcp Au square sheets on graphene oxide sheets, which exhibit an edge length of 200-500 nm and a thickness of ~ 2.4 nm (~ 16 Au atomic layers). Interestingly, the Au square sheet transforms from hcp to a fcc structure on exposure to an electron beam during transmission electron microscopy analysis. In addition, as the square sheet grows thicker (from ~ 2.4 to 6 nm), fcc segments begin to appear. A detailed experimental analysis of these structures shows that for structures with ultrasmall dimensions (for example, <~ 6 nm thickness for the square sheets), the previously unobserved pure hcp structure becomes stable and isolable.

  6. Mass transfer characteristics in a rotating packed bed with split packing

    Institute of Scientific and Technical Information of China (English)

    Youzhi Liu; Deyin Gu; Chengcheng Xu; Guisheng Qi; Weizhou Jiao

    2015-01-01

    The rotating packed bed (RPB) with split packing is a novel gas–liquid contactor, which intensifies the mass transfer processes controlled by gas-side resistance. To assess its efficacy, the mass transfer characteristics with adjacent rings in counter-rotation and co-rotation modes in a split packing RPB were studied experimentally. The physical absorption system NH3–H2O was used for characterizing the gas volumetric mass transfer coeffi-cient (kyae) and the effective interfacial area (ae) was determined by chemical absorption in the CO2–NaOH sys-tem. The variation in kyae and ae with the operating conditions is also investigated. The experimental results indicated that kyae and ae for counter-rotation of the adjacent packing rings in the split packing RPB were higher than those for co-rotation, and both counter-rotation and co-rotation of the split packing RPB were superior over conventional RPBs under the similar operating conditions.

  7. Discrete Element Method Numerical Modelling on Crystallization of Smooth Hard Spheres under Mechanical Vibration

    Institute of Scientific and Technical Information of China (English)

    AN Xi-Zhong

    2007-01-01

    The crystallization, corresponding to the fcc structure (with packing density p ≈ 0.74), of smooth equal hard spheres under batch-wised feeding and three-dimensional interval vibration is numerically obtained by using the discrete element method. The numerical experiment shows that the ordered packing can be realized by proper control of the dynamic parameters such as batch of each feeding § and vibration amplitude A. The radial distribution function and force network are used to characterize the ordered structure. The defect formed during vibrated packing is characterized as well The results in our work fill the gap of getting packing density between random close packing and fcc packing in phase diagram which provides an effective way of theoretically investigating the complex process and mechanism of hard sphere crystallization and its dynamics.

  8. Crystal science fundamentals

    OpenAIRE

    Ramachandran, V.; Halfpenny, PJ; Roberts, KJ

    2017-01-01

    The fundamentals of crystal science notably crystallography, crystal chemistry, crystal defects, crystal morphology and the surface chemistry of crystals are introduced with particular emphasis on organic crystals.

  9. Photonic crystals as metamaterials

    Science.gov (United States)

    Foteinopoulou, S.

    2012-10-01

    The visionary work of Veselago had inspired intensive research efforts over the last decade, towards the realization of man-made structures with unprecedented electromagnetic (EM) properties. These structures, known as metamaterials, are typically periodic metallic-based resonant structures demonstrating effective constitutive parameters beyond the possibilities of natural material. For example they can exhibit optical magnetism or simultaneously negative effective permeability and permittivity which implies the existence of a negative refractive index. However, also periodic dielectric and polar material, known as photonic crystals, can exhibit EM capabilities beyond natural materials. This paper reviews the conditions and manifestations of metamaterial capabilities of photonic crystal systems.

  10. Crystallization kinetics of colloidal binary mixtures with depletion attraction.

    Science.gov (United States)

    Kozina, Anna; Díaz-Leyva, Pedro; Palberg, Thomas; Bartsch, Eckhard

    2014-12-21

    In this work the crystallization kinetics of colloidal binary mixtures with attractive interaction potential (Asakura-Oosawa) has been addressed. Parameters such as fraction of crystals, linear crystal dimension and crystal packing have been quantified in order to understand how the crystal formation is driven in terms of the depth of the attractive potential and the composition of the binary mixture (described by the number ratio). It was found that inside the eutectic triangle, crystallization is mainly governed by nucleation and the crystal packing is close to the close-packing of hard spheres. Moving out from the eutectic triangle towards small component results in the crystallization of small spheres. Enrichment of the eutectic mixture with large component results in the crystallization of both large and small spheres, however, the kinetics are completely different from those of the eutectic composition. Crosslinked polystyrene microgels with nearly hard sphere interactions were used as model systems. Attraction was introduced by addition of linear polystyrene. The time evolution of crystallization has been followed by static light scattering.

  11. 29 CFR 784.135 - “Packing.”

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false âPacking.â 784.135 Section 784.135 Labor Regulations... First Processing, Canning, Or Packing of Marine Products Under Section 13(a)(5) § 784.135 “Packing.” The packing of the various named marine products at sea as an incident to, or in conjunction with, the...

  12. Green Revolution for Exhibition Industry

    Institute of Scientific and Technical Information of China (English)

    Yan Manman

    2010-01-01

    @@ Shanghai World Expo is widely regarded as another grand international pageant, so many people thought that the opening ceremony must be as much magnificent and brilliant as the opening ceremony for Beijing Olympics.However, it was revealed by Wan Jifei, Executive Director of the ExecutiveCommittee of the Shanghai World Expo that the opening ceremony of the Expo was not that luxurious and extravagant as that for the Beijing Olympics, but would have its own characteristics under the elaborate design and thorough arrangement conducted by the host. The veto against that luxurious opening ceremony was actually a practice echoing for the concept of Green World Expo, which would be applied for every corner from the beginning to the end of the Expo, including the construction of exhibition hall, building of exhibition stand and advertisement etc.

  13. World Expo and Exhibition Industry

    Institute of Scientific and Technical Information of China (English)

    Guo Liqin

    2010-01-01

    @@ February 8 witnessed the construction of 2010 World Expo's China Pavilion completed after two years' work. The pavilion, in the shape of an oriental crown,showcases the spirit of traditional Chinese culture. It is significant since all other nation's pavilion constructed only for temporary exhibition, but China's Pavilion will be lasting architecture as the symbol of world civilization. Another similar famous case is Eiffel Tower which was built as the entrance of the world expo held in. 1889.

  14. A New Exhibition in Microcosm

    CERN Multimedia

    2000-01-01

    Sebastien Pelletier explains states of matter to an enthusiastic group of youngsters during the opening of a new exhibition in Microcosm last week. The Fun with Physics workshop will be offered to all 13-14 year olds in school groups visiting CERN this year. The new Microcosm contents have been developed in collaboration with the local teaching community, and cover particles and the forces that act between them.

  15. "Big Science" exhibition at Balexert

    CERN Multimedia

    2008-01-01

    CERN is going out to meet those members of the general public who were unable to attend the recent Open Day. The Laboratory will be taking its "Big Science" exhibition from the Globe of Science and Innovation to the Balexert shopping centre from 19 to 31 May 2008. The exhibition, which shows the LHC and its experiments through the eyes of a photographer, features around thirty spectacular photographs measuring 4.5 metres high and 2.5 metres wide. Welcomed and guided around the exhibition by CERN volunteers, shoppers at Balexert will also have the opportunity to discover LHC components on display and watch films. "Fun with Physics" workshops will be held at certain times of the day. Main hall of the Balexert shopping centre, ground floor, from 9.00 a.m. to 7.00 p.m. Monday to Friday and from 10 a.m. to 6 p.m. on the two Saturdays. Call for volunteers All members of the CERN personnel are invited to enrol as volunteers to help welcom...

  16. Mobile Technologies in Museum Exhibitions

    Directory of Open Access Journals (Sweden)

    Sandra Medić

    2014-10-01

    Full Text Available In order to be up–to–date and give visitors a memorable and unique experience, museums are including usage of digital technologies in their exhibitions. Even though museums in Serbia are very important part of tourism offer, they still have traditional settings that are poorly interpreted. The majority of them have a scientific and historical review which is unattractive for various target groups of visitors and for museums it’s important to continually try out new ways in interpretation of their settings. Because technology continues to rapidly change the way we communicate, cultural institutions should adapt to new ways of communication with their visitors. This paper examines mobile technologies that can be used in museums to give visitors a different experience and transfer the knowledge innovatively. In that way it will be presented the modern concept of presentation of museum exhibitions, focusing on usage of mobile devices through mobile applications and QR codes. The paper provides the broad understanding of usage mobile technologies in museum exhibitions with its advantages and limitations. The research results can help the museums management to improve interpretation and communication with visitors and enrich the visitor experience.

  17. Body Packing: From Seizures to Laparotomy

    Directory of Open Access Journals (Sweden)

    Joanna M. Janczak

    2015-01-01

    Full Text Available Body packing is a common method for illegal drug trafficking. Complications associated with body packing can be severe and even lead to rapid death. Thus, a timely diagnosis is warranted. As most body packers initially do not show any symptoms, making a correct diagnosis can be rather challenging. We describe a case of a 41-year-old male, who was admitted with an epileptic seizure and who turned out to be a cocaine intoxicated body packer. Due to neurological and cardiovascular deterioration an emergency surgery was performed. Four bags of cocaine could be removed. We discuss the current management regimen in symptomatic and asymptomatic body packers and highlight pearls and pitfalls with diagnosis and treatment.

  18. On Approximating Four Covering and Packing Problems

    CERN Document Server

    Ashley, Mary; Berman, Piotr; Chaovalitwongse, Wanpracha; DasGupta, Bhaskar; Kao, Ming-Yang; 10.1016/j.jcss.2009.01.002

    2011-01-01

    In this paper, we consider approximability issues of the following four problems: triangle packing, full sibling reconstruction, maximum profit coverage and 2-coverage. All of them are generalized or specialized versions of set-cover and have applications in biology ranging from full-sibling reconstructions in wild populations to biomolecular clusterings; however, as this paper shows, their approximability properties differ considerably. Our inapproximability constant for the triangle packing problem improves upon the previous results; this is done by directly transforming the inapproximability gap of Haastad for the problem of maximizing the number of satisfied equations for a set of equations over GF(2) and is interesting in its own right. Our approximability results on the full siblings reconstruction problems answers questions originally posed by Berger-Wolf et al. and our results on the maximum profit coverage problem provides almost matching upper and lower bounds on the approximation ratio, answering a...

  19. Is incest common in gray wolf packs?

    Science.gov (United States)

    Smith, D.; Meier, T.; Geffen, E.; Mech, L.D.; Burch, J.W.; Adams, L.G.; Wayne, R.K.

    1997-01-01

    Wolf packs generally consist of a breeding pair and their maturing offspring that help provision and protect pack young. Because the reproductive tenure in wolves often is short, reproductively mature offspring might replace their parents, resulting in sibling or parent-offspring matings. To determine the extent of incestuous pairings, we measure relatedness based on variability in 20 microsatellite loci of mated pairs, parent-offspring pairs and siblings in two populations of gray wolves. Our 16 sampled mated pairs had values of relatedness not overlapping those of known parent-offspring or sibling dyads, which is consistent with their being unrelated or distantly related. These results suggest that full siblings or a parent and their offspring rarely mate and that incest avoidance is an important constraint on gray wolf behavioral ecology.

  20. Pattern Generation by Bubble Packing Method

    Directory of Open Access Journals (Sweden)

    Goel V.K.

    2013-06-01

    Full Text Available This paper presents a new computational method forornamental Pattern design. The work is a concerted effort ofevaluation of various methods and the comparatively betterprocess is used for designing keeping in mind the accuracyrequirement for such Indian traditional ethnic designs. The firststep in the process to apply the CAD tools to design the patterns.Small semantics (profile are made using the mathematicalmodelling to make different pattern. Geometric constraints suchas scaling, rotation, transformation etc. are applied to make andmodify the profiles. To create patterns, obtains node locationsthrough a physically based particle simulation, which we call'bubble packing. Bubbles are closely packed on the corners,edges and on the surface domain, and nodes are placed at thecenters of the bubbles. Experimental results show that ourmethod can create high quality ornamental patterns. Thefabrication of the ornaments is on rapid prototype machine.

  1. Helix-packing motifs in membrane proteins.

    Science.gov (United States)

    Walters, R F S; DeGrado, W F

    2006-09-12

    The fold of a helical membrane protein is largely determined by interactions between membrane-imbedded helices. To elucidate recurring helix-helix interaction motifs, we dissected the crystallographic structures of membrane proteins into a library of interacting helical pairs. The pairs were clustered according to their three-dimensional similarity (rmsd universe of common transmembrane helix-pairing motifs is relatively simple. The largest cluster, which comprises 29% of the library members, consists of an antiparallel motif with left-handed packing angles, and it is frequently stabilized by packing of small side chains occurring every seven residues in the sequence. Right-handed parallel and antiparallel structures show a similar tendency to segregate small residues to the helix-helix interface but spaced at four-residue intervals. Position-specific sequence propensities were derived for the most populated motifs. These structural and sequential motifs should be quite useful for the design and structural prediction of membrane proteins.

  2. Packing and Disorder in Substituted Fullerenes

    KAUST Repository

    Tummala, Naga Rajesh

    2016-07-15

    Fullerenes are ubiquitous as electron-acceptor and electron-transport materials in organic solar cells. Recent synthetic strategies to improve the solubility and electronic characteristics of these molecules have translated into a tremendous increase in the variety of derivatives employed in these applications. Here, we use molecular dynamics (MD) simulations to examine the impact of going from mono-adducts to bis- and tris-adducts on the structural, cohesive, and packing characteristics of [6,6]-phenyl-C60-butyric acid methyl ester (PCBM) and indene-C60. The packing configurations obtained at the MD level then serve as input for density functional theory calculations that examine the solid-state energetic disorder (distribution of site energies) as a function of chemical substitution. The variations in structural and site-energy disorders reflect the fundamental materials differences among the derivatives and impact the performance of these materials in thin-film electronic devices.

  3. 27 CFR 24.255 - Bottling or packing wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises and...

  4. 48 CFR 552.211-87 - Export packing.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Export packing. 552.211-87... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 552.211-87 Export packing. As prescribed in 511.204(b)(7), insert the following clause: Export Packing (JAN 2010) (a...

  5. 48 CFR 552.211-75 - Preservation, Packaging and Packing.

    Science.gov (United States)

    2010-10-01

    ... and Packing. 552.211-75 Section 552.211-75 Federal Acquisition Regulations System GENERAL SERVICES....211-75 Preservation, Packaging and Packing. As prescribed in 511.204(b)(2), insert the following clause: Preservation, Packaging, and Packing (FEB 1996) Unless otherwise specified, all items shall...

  6. 7 CFR 319.37-9 - Approved packing material.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Approved packing material. 319.37-9 Section 319.37-9..., and Other Plant Products 1,2 § 319.37-9 Approved packing material. Any restricted article at the time of importation or offer for importation into the United States shall not be packed in a...

  7. 48 CFR 211.272 - Alternate preservation, packaging, and packing.

    Science.gov (United States)

    2010-10-01

    ..., packaging, and packing. 211.272 Section 211.272 Federal Acquisition Regulations System DEFENSE ACQUISITION... Requirements Documents 211.272 Alternate preservation, packaging, and packing. Use the provision at 252.211-7004, Alternate Preservation, Packaging, and Packing, in solicitations which include...

  8. 75 FR 31283 - Clarification of Parachute Packing Authorization

    Science.gov (United States)

    2010-06-03

    ... Federal Aviation Administration 14 CFR Part 65 RIN 2120-AJ08 Clarification of Parachute Packing...) was expressly limited to packing a main parachute of a dual-parachute system for personal use...'' situations, parachute packing must be accomplished by or overseen by an appropriate current...

  9. 48 CFR 452.247-73 - Packing for Overseas Shipment.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Packing for Overseas Shipment. 452.247-73 Section 452.247-73 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE... Packing for Overseas Shipment. As prescribed in 447.305-10(c), insert the following clause: Packing...

  10. 48 CFR 452.247-72 - Packing for Domestic Shipment.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Packing for Domestic Shipment. 452.247-72 Section 452.247-72 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE... Packing for Domestic Shipment. As prescribed in 447.305-10(b), insert the following clause: Packing...

  11. 7 CFR 51.2927 - Marking and packing requirements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Marking and packing requirements. 51.2927 Section 51... STANDARDS) United States Standards for Grades of Apricots Marking and Packing Requirements § 51.2927 Marking and packing requirements. The minimum size or numerical count of the apricots in any package shall...

  12. 48 CFR 852.214-73 - Alternate packaging and packing.

    Science.gov (United States)

    2010-10-01

    ... packing. 852.214-73 Section 852.214-73 Federal Acquisition Regulations System DEPARTMENT OF VETERANS....214-73 Alternate packaging and packing. As prescribed in 814.201-6(b)(3), insert the following provision: Alternate Packaging and Packing (JAN 2008) The bidder's offer must clearly indicate the...

  13. 48 CFR 552.211-77 - Packing List.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Packing List. 552.211-77... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 552.211-77 Packing List. As prescribed in 511.204(c), insert the following clause: Packing List (FEB 1996) (a) A...

  14. 36 CFR 1002.16 - Horses and pack animals.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Horses and pack animals. 1002... AND RECREATION § 1002.16 Horses and pack animals. The following are prohibited: (a) The use of animals other than those designated as “pack animals” for purposes of transporting equipment. (b) The use...

  15. 36 CFR 34.10 - Saddle and pack animals.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Saddle and pack animals. 34... INTERIOR EL PORTAL ADMINISTRATIVE SITE REGULATIONS § 34.10 Saddle and pack animals. The use of saddle and pack animals is prohibited without a permit from the Superintendent....

  16. 36 CFR 2.16 - Horses and pack animals.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Horses and pack animals. 2.16... RESOURCE PROTECTION, PUBLIC USE AND RECREATION § 2.16 Horses and pack animals. The following are prohibited: (a) The use of animals other than those designated as “pack animals” for purposes of...

  17. CoolPack – Simulation tools for refrigeration systems

    DEFF Research Database (Denmark)

    Jakobsen, Arne; Rasmussen, Bjarne D.; Andersen, Simon Engedal

    1999-01-01

    CoolPack is a collection of programs used for energy analysis and optimisation of refrigeration systems. CoolPack is developed at the Department of Energy Engineering at the Technical University of Denmark. The Danish Energy Agency finances the project. CoolPack is freeware and can be downloaded...

  18. Crystal structure of 2-{(R-[1-(4-bromophenylethyl]iminomethyl}-4-(phenyldiazenylphenol, a chiral photochromic Schiff base

    Directory of Open Access Journals (Sweden)

    Ryoji Moriwaki

    2015-11-01

    Full Text Available The title chiral photochromic Schiff base compound, C21H18BrN3O, was synthesized from (R-(+-1-(4-bromophenylethylamine and the salicylaldehyde of an azobenzene derivative. The molecule corresponds to the phenol–imine tautomer, the C=N and N—C bond distances being 1.285 (3 and 1.470 (3 Å, respectively. The diazenyl group adopts a trans form, with an N=N distance of 1.256 (3 Å. The hydroxy group is involved in intramolecular O—H...N hydrogen bonding. In the crystal, C—H...π interactions consolidate the crystal packing of one-dimensional chains, which exhibits short intermolecular Br...C contacts of 3.400 (3 Å.

  19. Partitioning And Packing Equations For Parallel Processing

    Science.gov (United States)

    Arpasi, Dale J.; Milner, Edward J.

    1989-01-01

    Algorithm developed to identify parallelism in set of coupled ordinary differential equations that describe physical system and to divide set into parallel computational paths, along with parts of solution proceeds independently of others during at least part of time. Path-identifying algorithm creates number of paths consisting of equations that must be computed serially and table that gives dependent and independent arguments and "can start," "can end," and "must end" times of each equation. "Must end" time used subsequently by packing algorithm.

  20. Flaming Pear Creative Pack1.0

    Institute of Scientific and Technical Information of China (English)

    Kane

    2003-01-01

    Flaming Pear是个一直给我留下深刻印象的软件开发公司。我以前评论过很多这个公司的插件,每一次都是不错的经历。同样的优良传统同样体现在Flaming Pear的新品Creative Pack1.0

  1. Sensory Analysis of Stored Tray Pack Foods

    Science.gov (United States)

    1989-12-01

    Milk chocolate brown. ODOR: Sweet, typical of heat processed milk cocoa . FLAVOR: Sweet, full milk cocoa flavor. TEXTURE: Smooth, medium thick...7B DEGREES 100 DEGREES 6. DESSERTS Chocolate Pudding There was no significant finding with this Tray Pack item. Marble Cake At 70°F, the effect...and 6 months. The main effect of temperature on acceptability of this item was not significant. Chocolate Cake At 70°F, there was a significant

  2. Effects of Nasopore Packing on Dacryocystorhinostomy

    OpenAIRE

    Jang, Sun Young; Lee, Kyou Ho; Lee, Sang Yeul; Yoon, Jin Sook

    2013-01-01

    Purpose To investigate the effects of placement of the absorbable packing material Nasopore at the anastomosis site of newly formed mucosal flaps on postoperative re-bleeding, discomfort, and on the success rate of dacryocystorhinostomy (DCR). Methods A review of the medical records of patients with primary acquired nasolacrimal duct obstruction that underwent external or endonasal DCR by a single surgeon was performed. The degree of re-bleeding, discomfort, and postoperative results, includi...

  3. A Controlled New Process of Pack Aluminization

    Institute of Scientific and Technical Information of China (English)

    HUANG Zhi-rong; MA Liu-bao; LI Pei-ning; XU Hong

    2004-01-01

    Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coating process takes place in a bed containing a mixed powder that serves as a source of the coatings forming element. The phase composition of the diffusion layer obtained depends on the activity of the Al during the pack aluminization processing. In this work, the proportion of Al to special additive powder in the pack and the treatment temperature are adjusted to achieve the desired surface composition of aluminized layer. The aluminized 20 plain carbon steel and HK40 austenitic steel were investigated by optical microscopy (OM) , X-ray diffraction (XRD)and microsclerometer. The results showed that the desired FeAl, Fe3Al and NiAl were respectively formed on the 20 plain carbon steel and HK40 austenitic steel, and the aluminides FeAl3, Fe2Al5 or Ni2Al3, NiAl3 could be inhibited.

  4. A Controlled New Process of Pack Aluminization

    Institute of Scientific and Technical Information of China (English)

    HUANGZhi-rong; MALiu-bao; LIPei-ning; XUHong

    2004-01-01

    Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coating process takes place in a bed containing a mixed powder that serves as a source of the coatings forming element. The phase composition of the diffusion layer obtained depends on the activity of the Al during the pack aluminization processing. In this work, the proportion of Al to special additive powder in the pack and the treatment temperature are adjusted to achieve the desired surface composition of aluminized layer. The aluminized 20 plain carbon steel and HK40 austenitic steel were investigated by optical microscopy (OM) , X-ray diffraction (XRD) and microsclerometer. The results showed that the desired FeAl, Fe3Al and NiAl were respectively formed on the 20 plain carbon steel and HK40 austenitic steel, and the aluminides FeAl3, Fe2Al5 or Ni2Al3, NiAl3 could be inhibited.

  5. The mechanical behaviour of packed particulates

    Energy Technology Data Exchange (ETDEWEB)

    Dutton, R

    1998-01-01

    Within the Canadian Nuclear Fuel Waste Management program, the central concept is to package used fuel in containers that would be deposited in an underground vault in a plutonic rock formation. To provide internal mechanical support for the container, the reference design specifies it to be filled with a matrix of compacted particulate material (called 'packed particulate'), such as quartz sand granules. The focus of this report is on the mechanical properties of the packed-particulate material, based on information drawn from the extant literature. We first consider the packing density of particulate matrices to minimize the remnant porosity and maximize mechanical stability under conditions of external pressure. Practical methods, involving vibratory packing, are reviewed and recommendations made to select techniques to achieve optimum packing density. The behaviour of particulates under compressive loading has been of interest to the powder metallurgy industry (i.e., the manufacture of products from pressed/sintered metal and ceramic powders) since the early decades of this century. We review the evidence showing that in short timescales, stress induced compaction occurs by particle shuffling and rearrangement, elastic distortion, plastic yielding and microfracturing. Analytical expressions are available to describe these processes in a semiquantitative fashion. Time-dependent compaction, mainly via creep mechanisms, is more complex. Much of the theoretical and experimental information is confined to higher temperatures (> 500 degrees C), where deformation rates are more rapid. Thus, for the relatively low ambient temperatures of the waste container ({approx}100 degrees C), we require analytical techniques to extrapolate the collective particulate creep behaviour. This is largely accomplished by employing current theories of creep deformation, particularly in the form of Deformation Mechanism Maps, which allow estimation of creep rates over a wide

  6. Borneo 2007. Three European Exhibitions

    Directory of Open Access Journals (Sweden)

    Bernard Sellato

    2013-01-01

    Full Text Available The year 2007 appears to have been an exceptionally good one for Borneo in Europe. Two exhibitions were held in France, and one in Switzerland, which prominently featured the big island, its forests, its peoples, its cultures, and its arts. Here a brief review of these three events. Bornéo... Dayak et Punan. Peuples de la forêt tropicale humide, Musée d’Art et d’Archéologie, Laon, France, 25 November 2006 – 11 March 2007 The beautiful city of Laon, only a short distance by train or by car fro...

  7. CERN Permanent exhibitions short version

    CERN Multimedia

    2016-01-01

    Visits Explore by yourself the issues CERN's physicists are trying to solve: given that the entire universe is made of particles, where do they come from? Why do they behave in the way they do? Discover the massive apparatus used by physicists at CERN, like the LHC, and see how each part works. CERN invites the public to discover the mysteries of the Universe and the work of the world's biggest physics laboratory through free of charge guided tours and permanent exhibitions. As a group, with friends, individually, on foot, on your bike, come and discover CERN or explore it virtually. Welcome!

  8. Conical wave propagation and diffraction in two-dimensional hexagonally packed granular lattices.

    Science.gov (United States)

    Chong, C; Kevrekidis, P G; Ablowitz, M J; Ma, Yi-Ping

    2016-01-01

    Linear and nonlinear mechanisms for conical wave propagation in two-dimensional lattices are explored in the realm of phononic crystals. As a prototypical example, a statically compressed granular lattice of spherical particles arranged in a hexagonal packing configuration is analyzed. Upon identifying the dispersion relation of the underlying linear problem, the resulting diffraction properties are considered. Analysis both via a heuristic argument for the linear propagation of a wave packet and via asymptotic analysis leading to the derivation of a Dirac system suggests the occurrence of conical diffraction. This analysis is valid for strong precompression, i.e., near the linear regime. For weak precompression, conical wave propagation is still possible, but the resulting expanding circular wave front is of a nonoscillatory nature, resulting from the complex interplay among the discreteness, nonlinearity, and geometry of the packing. The transition between these two types of propagation is explored.

  9. Thermodynamics of the hexagonal close-packed iron-nitrogen system from first-principles

    DEFF Research Database (Denmark)

    Bakkedal, Morten Bjørn

    is assumed fixed.The models are developed entirely from first-principles calculations based on fundamen-tal quantum mechanical calculation through the density functional theory approach with the atomic numbers and crystal structures as the only input parameters. A complete thermody-namic description should......First-principles thermodynamic models are developed for the hexagonal close-packed ε-Fe-N system. The system can be considered as a hexagonal close-packed host lattice of iron atoms and with the nitrogen atoms residing on a sublattice formed by the octahedral interstices. The iron host lattice......, at least in principle, include vibrational as well as configurational contributions. As both contributions are computationally very demanding in first-principles calculations, the present work is divided in two parts, with a detailed accounts of each of these contributions.Vibrational degrees of freedom...

  10. Wave propagation and thermodynamic losses in packed-bed thermal reservoirs for energy storage

    OpenAIRE

    2014-01-01

    This is the accepted manuscript for a paper published in Applied Energy Volume 130, 1 October 2014, Pages 648–657, DOI: 10.1016/j.apenergy.2014.02.071 This paper presents a numerical and theoretical analysis of thermal wave propagation in packed bed thermal reservoirs for energy storage applications. In such reservoirs, the range of temperatures encountered is usually such that the solid storage medium will exhibit significant changes in specific heat capacity. This in turn result...

  11. Highly efficient capillary columns packed with superficially porous particles via sequential column packing.

    Science.gov (United States)

    Treadway, James W; Wyndham, Kevin D; Jorgenson, James W

    2015-11-27

    Highly efficient capillary columns packed with superficially porous particles were created for use in ultrahigh pressure liquid chromatography. Superficially porous particles around 1.5μm in diameter were packed into fused silica capillary columns with 30, 50, and 75μm internal diameters. To create the columns, several capillary columns were serially packed from the same slurry, with packing progress plots being generated to follow the packing of each column. Characterization of these columns using hydroquinone yielded calculated minimum reduced plate heights as low as 1.24 for the most efficient 30μm internal diameter column, corresponding to over 500,000plates/m. At least one highly efficient column (minimum reduced plate height less than 2) was created for all three of the investigated column inner diameters, with the smallest diameter columns having the highest efficiency. This study proves that highly efficient capillary columns can be created using superficially porous particles and shows the efficiency potential of these particles.

  12. A HARMONIC ALGORITHM FOR THE 3D STRIP PACKING PROBLEM

    OpenAIRE

    Bansal, Nikhil; Han, X.; Iwama, K.; Sviridenko, M.; Zhang, Guochuan

    2013-01-01

    htmlabstractIn the three-dimensional (3D) strip packing problem, we are given a set of 3D rectangular items and a 3D box $B$. The goal is to pack all the items in $B$ such that the height of the packing is minimized. We consider the most basic version of the problem, where the items must be packed with their edges parallel to the edges of $B$ and cannot be rotated. Building upon Caprara's work for the two-dimensional (2D) bin packing problem, we obtain an algorithm that, given any $\\epsilon>0...

  13. Stability of orientationally disordered crystal structures of colloidal hard dumbbells.

    Science.gov (United States)

    Marechal, Matthieu; Dijkstra, Marjolein

    2008-06-01

    We study the stability of orientationally disordered crystal phases in a suspension of colloidal hard dumbbells using Monte Carlo simulations. For dumbbell bond length L/sigmafcc structure for a large part of the stable plastic crystal regime. In addition, we study the stability of an orientationally disordered aperiodic crystal structure in which the spheres of the dumbbells are on a random-hexagonal-close-packed lattice, and the dumbbells are formed by taking random pairs of neighboring spheres. Using free-energy calculations, we determine the fluid-aperiodic crystal and periodic-aperiodic crystal coexistence regions for L/sigma>0.88 .

  14. Polymorph control of luminescence properties in molecular crystals of a platinum and organoarsenic complex and formation of stable one-dimensional nanochannel.

    Science.gov (United States)

    Unesaki, Hikaru; Kato, Takuji; Watase, Seiji; Matsukawa, Kimihiro; Naka, Kensuke

    2014-08-18

    The mononuclear diiodoplatinum(II) complex (trans-PtI2(cis-DHDAMe)2), where cis-DHDAMe = cis-1,4-dihydro-1,4-dimethyl-2,3,5,6-tetrakis(methoxycarbonyl)-1,4-diarsinine, forms three different crystalline polymorphs that can be either concomitantly or separately obtained on varying the recrystallization conditions. Cubic red crystals (α-phase) and red-orange needles (β-phase) exhibit solid-state red emissions at room temperature. Cubic red crystals of the γ-phase show no solid-state emission at room temperature. All crystalline structures were confirmed by X-ray crystallography. Room-temperature strongly luminescent crystals (α-phase) (λem = 657 nm, Φ = 0.52) have a triclinic P1 (No. 2) structure and no voids in the crystal structure. Red-orange needle-shaped crystals of the β-phase exhibit moderate red luminescence (λem = 695 nm, Φ = 0.09) at room temperature and have a trigonal, R3 (No. 148), structure. In the needlelike crystals of the β-phase, stable hexagonal arrays of nanoporous channels, 5.0 Å in diameter, are formed. Room-temperature nonluminescent crystals (γ-phase) have an orthorhombic, Pbca (No. 61), structure with a void volume that is 4.9% of the total crystal volume. After heating the α-phase crystals at 150 °C for 2 min, a powder XRD pattern different from the original crystal is obtained, and its solid-state emission at room temperature decreased. After heating the β-phase crystals at 150 °C for 2 min, the emission wavelength and the quantum yield of the solid-state emission at room temperature and the powder XRD pattern are the same as those of the α-phase after heating at 150 °C. A crystal-to-crystal transition triggered by the thermal stimulus produces a different stable polymorph of the mononuclear diiodoplatinum(II) complex. The one-dimensional nanoporous crystals encapsulated iodine without distorting the crystal packing.

  15. Numerical Simulation of Random Close Packing with Tetrahedra

    Institute of Scientific and Technical Information of China (English)

    LI Shui-Xiang; ZHAO Jian; ZHOU Xuan

    2008-01-01

    The densest packing of tetrahedra is still an unsolved problem.Numerical simulations of random close packing of tetrahedra are carried out with a sphere assembly model and improved relaxation algorithm. The packing density and average contact number obtained for random close packing of regular tetrahedra is 0.6817 and 7.21respectively,while the values of spheres are 0.6435 and 5.95.The simulation demonstrates that tetrahedra can be randomly packed denser than spheres.Random close packings of tetrahedra with a range of height are simulated as well.We find that the regular tetrahedron might be the optimal shape which gives the highest packing density of tetrahedra.

  16. Self-assembly and molecular packing in cholesteryl esters at interfaces

    Science.gov (United States)

    Sarkar, Arup; Suresh, K. A.

    2017-06-01

    To understand the self-assembly and molecular packing in cholesteryl esters relevant to biological processes, we have studied them at the air-water and air-solid interfaces. Our phase and thickness studies employing imaging ellipsometry and atomic force microscopy along with surface manometry show that the molecular packing of cholesteryl esters at interfaces can be related to Craven's model of packing, given for bulk. At the air-water interface, following Craven's model, cholesteryl nonanoate and cholesteryl laurate exhibit a fluidic bilayer phase. Interestingly, we find the fluidic bilayer phase of cholesteryl laurate to be unstable and it switches to a crystalline bilayer phase. However, according to Craven, only cholesteryl esters with longer chain lengths starting from cholesteryl tridecanoate should show the crystalline bilayer phase. The thickness behavior of different phases was also studied by transferring the films onto a silicon substrate by using the Langmuir-Blodgett technique. Texture studies show that cholesterol, cholesteryl acetate, cholesteryl nonanoate, cholesteryl laurate, and cholesteryl myristate exhibit homogeneous films with large size domains, whereas cholesteryl palmitate and cholesteryl stearate exhibit less homogeneous films with smaller size domains. We suggest that such an assembly of molecules can be related to their molecular structures. Simulation studies may confirm such a relation.

  17. Enhancing ubiquitin crystallization through surface-entropy reduction.

    Science.gov (United States)

    Loll, Patrick J; Xu, Peining; Schmidt, John T; Melideo, Scott L

    2014-10-01

    Ubiquitin has many attributes suitable for a crystallization chaperone, including high stability and ease of expression. However, ubiquitin contains a high surface density of lysine residues and the doctrine of surface-entropy reduction suggests that these lysines will resist participating in packing interactions and thereby impede crystallization. To assess the contributions of these residues to crystallization behavior, each of the seven lysines of ubiquitin was mutated to serine and the corresponding single-site mutant proteins were expressed and purified. The behavior of these seven mutants was then compared with that of the wild-type protein in a 384-condition crystallization screen. The likelihood of obtaining crystals varied by two orders of magnitude within this set of eight proteins. Some mutants crystallized much more readily than the wild type, while others crystallized less readily. X-ray crystal structures were determined for three readily crystallized variants: K11S, K33S and the K11S/K63S double mutant. These structures revealed that the mutant serine residues can directly promote crystallization by participating in favorable packing interactions; the mutations can also exert permissive effects, wherein crystallization appears to be driven by removal of the lysine rather than by addition of a serine. Presumably, such permissive effects reflect the elimination of steric and electrostatic barriers to crystallization.

  18. Screening of multicomponent crystals of L-tryptophan with three isomers of pyridinedicarboxylic acids

    Science.gov (United States)

    Das, Babulal

    2016-08-01

    Multicomponent crystallization of L-tryptophan with three different isomers of pyridinedicarboxylic acids, namely, 2,3-pyridinedicarboxylic acid (2,3-PDA), 2,5-pyridinedicarboxylic acid (2,5-PDA) and 2,6-pyridinedicarboxylic acid (2,6-PDA), were screened using conventional solution cocrystallization technique. Whereas the new phases derived from the amino acid with 2,3-PDA or 2,5-PDA were analyzed using powder X-ray diffraction and thermal analysis techniques, the crystalline phase synthesized from 2,6-substituted isomer was further characterized by single crystal X-ray diffraction. Structural analysis revealed that the amino acid exists in the zwitterionic form interacting with the neutral 2,6-PDA by strong intermolecular hydrogen bonding. The components in the co-crystal self-assemble leading to a three dimensional hydrogen bonded closed packed network structure. Isothermal calorimetric titration showed that among the three isomers, 2,6-PDA showed relatively strong binding interaction towards the amino acid in water at 298 K. All the crystals exhibit marginal quenching of fluorescence properties of L-tryptophan in the solid state.

  19. Phononic crystals of poroelastic spheres

    Science.gov (United States)

    Alevizaki, A.; Sainidou, R.; Rembert, P.; Morvan, B.; Stefanou, N.

    2016-11-01

    An extension of the layer-multiple-scattering method to phononic crystals of poroelastic spheres immersed in a fluid medium is developed. The applicability of the method is demonstrated on specific examples of close-packed fcc crystals of submerged water-saturated meso- and macroporous silica microspheres. It is shown that, by varying the pore size and/or the porosity, the transmission, reflection, and absorption spectra of finite slabs of these crystals are significantly altered. Strong absorption, driven by the slow waves in the poroelastic material and enhanced by multiple scattering, leads to negligible transmittance over an extended frequency range, which might be useful for practical applications in broadband acoustic shielding. The results are analyzed by reference to relevant phononic dispersion diagrams in the viscous and inertial coupling limits, and a consistent interpretation of the underlying physics is provided.

  20. Enrico Fermi exhibition at CERN

    CERN Document Server

    2002-01-01

    A touring exhibition celebrating the centenary of Enrico Fermi's birth in 1901 will be on display at CERN (Main Building, Mezzanine) from 12-27 September. You are cordially invited to the opening celebration on Thursday 12 September at 16:00 (Main Building, Council Chamber), which will include speechs from: Luciano Maiani Welcome and Introduction Arnaldo Stefanini Celebrating Fermi's Centenary in Documents and Pictures Antonino Zichichi The New 'Centro Enrico Fermi' at Via Panisperna Ugo Amaldi Fermi at Via Panisperna and the birth of Nuclear Medicine Jack Steinberger Fermi in Chicago Valentin Telegdi A Close-up of Fermi and the screening of a documentary video about Fermi: Scienziati a Pisa: Enrico Fermi (Scientists at Pisa: Enrico Fermi) created by Francesco Andreotti for La Limonaia from early film, photographs and sound recordings (In Italian, with English subtitles - c. 30 mins). This will be followed by an aperitif on the Mezz...

  1. Crows spontaneously exhibit analogical reasoning.

    Science.gov (United States)

    Smirnova, Anna; Zorina, Zoya; Obozova, Tanya; Wasserman, Edward

    2015-01-19

    Analogical reasoning is vital to advanced cognition and behavioral adaptation. Many theorists deem analogical thinking to be uniquely human and to be foundational to categorization, creative problem solving, and scientific discovery. Comparative psychologists have long been interested in the species generality of analogical reasoning, but they initially found it difficult to obtain empirical support for such thinking in nonhuman animals (for pioneering efforts, see [2, 3]). Researchers have since mustered considerable evidence and argument that relational matching-to-sample (RMTS) effectively captures the essence of analogy, in which the relevant logical arguments are presented visually. In RMTS, choice of test pair BB would be correct if the sample pair were AA, whereas choice of test pair EF would be correct if the sample pair were CD. Critically, no items in the correct test pair physically match items in the sample pair, thus demanding that only relational sameness or differentness is available to support accurate choice responding. Initial evidence suggested that only humans and apes can successfully learn RMTS with pairs of sample and test items; however, monkeys have subsequently done so. Here, we report that crows too exhibit relational matching behavior. Even more importantly, crows spontaneously display relational responding without ever having been trained on RMTS; they had only been trained on identity matching-to-sample (IMTS). Such robust and uninstructed relational matching behavior represents the most convincing evidence yet of analogical reasoning in a nonprimate species, as apes alone have spontaneously exhibited RMTS behavior after only IMTS training. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Science, providence, and progress at the Great Exhibition.

    Science.gov (United States)

    Cantor, Geoffrey

    2012-09-01

    The Great Exhibition of 1851 is generally interpreted as a thoroughly secular event that celebrated progress in science, technology, and industry. In contrast to this perception, however, the exhibition was viewed by many contemporaries as a religious event of considerable importance. Although some religious commentators were highly critical of the exhibition and condemned the display of artifacts in the Crystal Palace as giving succor to materialism, others incorporated science and technology into their religious frameworks. Drawing on sermons, tracts, and the religious periodical press, this essay pays close attention to the ways in which science and technology were endowed with providentialist significance and particularly examines the notion of human progress used by a number of Christian writers, especially Congregationalists, who set scientific and technological progress within a teleological religious perspective. This discussion sheds fresh light not only on the Great Exhibition itself but also on the deployment of natural theology in mid-nineteenth-century Britain.

  3. Crystallization of lactose from carbopol gels.

    Science.gov (United States)

    Zeng, X M; Martin, G P; Marriott, C; Pritchard, J

    2000-07-01

    To crystallize lactose under static conditions with a view to preparing crystals of well-defined morphology. et-Lactose monohydrate was crystallized from neutralized Carbopol 934 gels. When the majority of crystals had grown to maturity, the gels were acidified using diluted hydrochloric acid and the crystals were harvested by filtration or centrifugation and washed with ethanol-water mixtures. Crystals prepared from the gel had a consistently narrower size distribution than control crystals, prepared from solution under constant stirring. If crystallization was effected in the gel without sedimentation of the crystals, then the resultant crystals had smooth surfaces without visually detectable surface roughness or asperities viewed by optical microscopy. The crystals from Carbopol gels also exhibited the uniform shape of an elongated tomahawk regardless of the crystallization conditions, in contrast to crystallization under constant stirring, where the crystal shape of lactose changed with crystallization conditions especially as a function of the initial concentration of lactose. All batches of lactose crystals prepared from Carbopol gels existed as alpha-lactose monohydrate, which showed better flowability than the controls of a similar particle size. Crystallization from Carbopol gel produces lactose crystals of uniform size, regular shape, smooth surface, and improved flowability.

  4. Understanding the general packing rearrangements required for successful template based modeling of protein structure from a CASP experiment.

    Science.gov (United States)

    Day, Ryan; Joo, Hyun; Chavan, Archana C; Lennox, Kristin P; Chen, Y Ann; Dahl, David B; Vannucci, Marina; Tsai, Jerry W

    2013-02-01

    As an alternative to the common template based protein structure prediction methods based on main-chain position, a novel side-chain centric approach has been developed. Together with a Bayesian loop modeling procedure and a combination scoring function, the Stone Soup algorithm was applied to the CASP9 set of template based modeling targets. Although the method did not generate as large of perturbations to the template structures as necessary, the analysis of the results gives unique insights into the differences in packing between the target structures and their templates. Considerable variation in packing is found between target and template structures even when the structures are close, and this variation is found due to 2 and 3 body packing interactions. Outside the inherent restrictions in packing representation of the PDB, the first steps in correctly defining those regions of variable packing have been mapped primarily to local interactions, as the packing at the secondary and tertiary structure are largely conserved. Of the scoring functions used, a loop scoring function based on water structure exhibited some promise for discrimination. These results present a clear structural path for further development of a side-chain centered approach to template based modeling. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Piper betle extracts exhibit antitumor activity by augmenting antioxidant potential.

    Science.gov (United States)

    Alam, Badrul; Majumder, Rajib; Akter, Shahina; Lee, Sang-Han

    2015-02-01

    The present study was conducted to evaluate the methanolic extract of Piper betle leaves (MPBL) and its organic fractions with regard to antitumor activity against Ehrlich ascites carcinoma (EAC) in Swiss albino mice and to confirm their antioxidant activities. At 24 h post-intraperitoneal inoculation of tumor cells into mice, extracts were administered at 25, 50 and 100 mg/kg body weight for nine consecutive days. The antitumor effects of the extracts were then assessed according to tumor volume, packed cell count, viable and non-viable tumor cell count, median survival time and increase in life span of EAC-bearing mice. Next, hematological profiles and serum biochemical parameters were calculated, and antioxidant properties were assessed by estimating lipid peroxidation, reduced glutathione (GSH), superoxide dismutase (SOD) and catalase (CAT) levels. MPBL and the ethylacetate fraction (EPBL) at a dose of 100 mg/kg induced a significant decrease in tumor volume, packed cell volume and viable cell count and increased the life span of the EAC-bearing mice (PPiper betle extracts exhibit significant antitumor activity, which may be attributed to the augmentation of endogenous antioxidant potential.

  6. Packed fluidized bed blanket for fusion reactor

    Science.gov (United States)

    Chi, John W. H.

    1984-01-01

    A packed fluidized bed blanket for a fusion reactor providing for efficient radiation absorption for energy recovery, efficient neutron absorption for nuclear transformations, ease of blanket removal, processing and replacement, and on-line fueling/refueling. The blanket of the reactor contains a bed of stationary particles during reactor operation, cooled by a radial flow of coolant. During fueling/refueling, an axial flow is introduced into the bed in stages at various axial locations to fluidize the bed. When desired, the fluidization flow can be used to remove particles from the blanket.

  7. Comparing Online Algorithms for Bin Packing Problems

    DEFF Research Database (Denmark)

    Epstein, Leah; Favrholdt, Lene Monrad; Kohrt, Jens Svalgaard

    2012-01-01

    -order ratio to online algorithms for several common variants of the bin packing problem. We mainly consider pairs of algorithms that are not distinguished by the competitive ratio and show that the relative worst-order ratio prefers the intuitively better algorithm of each pair.......The relative worst-order ratio is a measure of the quality of online algorithms. In contrast to the competitive ratio, this measure compares two online algorithms directly instead of using an intermediate comparison with an optimal offline algorithm. In this paper, we apply the relative worst...

  8. Comparing Online Algorithms for Bin Packing Problems

    DEFF Research Database (Denmark)

    Epstein, Leah; Favrholdt, Lene Monrad; Kohrt, Jens Svalgaard

    2012-01-01

    The relative worst-order ratio is a measure of the quality of online algorithms. In contrast to the competitive ratio, this measure compares two online algorithms directly instead of using an intermediate comparison with an optimal offline algorithm. In this paper, we apply the relative worst-ord......-order ratio to online algorithms for several common variants of the bin packing problem. We mainly consider pairs of algorithms that are not distinguished by the competitive ratio and show that the relative worst-order ratio prefers the intuitively better algorithm of each pair....

  9. Molecular Packing in Network-Forming Collagens

    Directory of Open Access Journals (Sweden)

    Carlo Knupp

    2003-01-01

    Full Text Available Collagen is the most abundant protein among vertebrates and occurs in virtually all multicellular animals. Collagen molecules are classified into 21 different types and differ in their sequence, weight, structure, and function, but they can be broadly subdivided into families. Type IV, VI, VIII, X, and dogfish egg case collagens belong to the network-forming family. Here, we summarise what is known about the way these collagen molecules pack to form networks. In addition the main structural characteristics of the network-forming collagens are compared and discussed.

  10. Radiative transfer in closely packed realistic regoliths

    Directory of Open Access Journals (Sweden)

    S. Vahidinia

    2011-09-01

    Full Text Available We have developed a regolith radiative transfer model (RRT based on a first-principles approach to regolith modeling that is essential for near-to-far infrared observations of grainy surfaces, and is readily configured to answer fundamental questions about popular models with which all remote observations of all airless solar system bodies with granular surfaces are currently interpreted. Our model accounts for wavelength-size regolith particles which are closely packed and can be heterogeneous in composition and arbitrarily shaped. Here we present preliminary results showing the role of porosity on layer reflectivity.

  11. Sugar exported: sugar packed in containers

    Directory of Open Access Journals (Sweden)

    José Alberto Yemal

    2010-04-01

    Full Text Available This paper presents a study in the port sector specialized in handling of bagged sugar. Sugar has always been exported in bags of 50 kg, placed directly in the holds of ships for general cargo. It appears that this form of transport has become obsolete now, the market for the direct form of transport of sugar packed in containers. Companies involved in this type of port handling need understand the reasons that are influencing this new mode of transportation as a way to fit and remain active and competitive in the industry.

  12. Efficacy of wood charcoal and its modified form as packing media for biofiltration of isoprene.

    Science.gov (United States)

    Srivastva, Navnita; Singh, Ram S; Dubey, Suresh K

    2017-07-01

    The efficacy of wood charcoal (WC) and nutrient-enriched wood charcoal (NWC) as biofilter packing media were assessed for isoprene biodegradation in a bioreactor comprising bioscrubber and a biofilter connected in series and inoculated with Pseudomonas sp. The bioreactors using WC and NWC exhibited >90% removal efficiency and around 369 g m(-3) h(-1) elimination capacity at around 404 g m(-3) h(-1) inlet loading rate. In both the bioreactors, the biofilter component showed better degradation capacity compared to the bioscrubber unit. The kinetic parameters, maximum elimination capacity, ECmax; substrate constant, Ks and ECmax/Ks for Michaelis-Menten model were evaluated. The lower Ks for the WC packed bioreactor indicated that ECmax achieved, was faster compared to others, while higher ECmax and ECmax/Ks for the NWC packed bioreactor suggests its superiority in isoprene abatement in the continuous mode. A comparison of the available published information on biofiltration of isoprene reflected polyurethane foam as the superior packing media. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Influence of deuteration and fluorination on the supramolecular architecture of pyridine N-oxide crystals.

    Science.gov (United States)

    Shishkin, Oleg V; Shishkina, Svitlana V; Maleev, Andrey V; Zubatyuk, Roman I; Vasylyeva, Vera; Merz, Klaus

    2013-03-18

    To understand how deuterium and fluorine substituents influence the supramolecular architecture of pyridine N-oxide crystals, the crystal structure of 3-fluoropyridine N-oxide (PNO-3F) was determined and the crystal packing motives of non-deuterated pyridine-N-oxide (PNO), partial-deuterated pyridine-N-oxide (PNO-D) and PNO-3F were analyzed based on ab initio quantum-chemical calculations of the intermolecular interaction energy, using the MP2/6-311G(d,p) method. The appearance of the weak-directing substituents deuterium and fluorine leads to significant changes in the crystal organization of the isotropic packing of PNO molecules.

  14. Experimental evidence of ageing and slow restoration of the weak-contact configuration in tilted 3D granular packings

    Science.gov (United States)

    Kiesgen de Richter, S.; Zaitsev, V. Yu; Richard, P.; Delannay, R.; Le Caër, G.; Tournat, V.

    2010-11-01

    Granular packings slowly driven towards their instability threshold are studied using a digital imaging technique as well as a nonlinear acoustic method. The former method allows us to study grain rearrangements on the surface during the tilting and the latter enables us to selectively probe the modifications of the weak-contact fraction in the material bulk. Gradual ageing of both the surface activity and the weak-contact reconfigurations is observed as a result of repeated tilt cycles up to a given angle smaller than the angle of avalanche. For an aged configuration reached after several consecutive tilt cycles, abrupt resumption of the on-surface activity and of the weak-contact rearrangements occurs when the packing is subsequently inclined beyond the previous maximal tilting angle. This behavior is compared with literature results from numerical simulations of inclined 2D packings. It is also found that the aged weak-contact configurations exhibit spontaneous restoration towards the initial state if the packing remains at rest for tens of minutes. When the packing is titled forth and back between zero and near-critical angles, instead of ageing, the weak-contact configuration exhibits 'internal weak-contact avalanches' in the vicinity of both the near-critical and zero angles. By contrast, the stronger-contact skeleton remains stable.

  15. Hexagonal Close-Packed ^4{He} as Crystalline Multilayered Polytype: An Alternative for `Supersolid' or `Glassy-Like' Phase

    Science.gov (United States)

    Chishko, K. A.; Antsygina, T. N.; Poltavskaya, M. I.

    2017-01-01

    We apply the model of a crystalline polytype built of close-packed 2D monoatomic basal planes with triangular lattice to interpret the anomalous thermodynamical and mechanical properties of solid hexagonal close-packed (HCP) ^4{He} . The polytype is a 3D stack of the basal planes, and its structure can be built from the simplest periodic packing (HCP, FCC, 4H, 5H, 6R, ldots etc.) up to random stacking fault system (RSFS) totally aperiodic in only c-direction perpendicular to the basal planes. RSFS is a crystal without microscopic translation symmetry along c-axis, i.e., entirely disordered in only one spatial direction. Despite of packing disorder, c-direction remains the crystallographic axis of third order at arbitrary sequence of the 2D plates in the whole stack. In a long-wave limit the HCP polytype can be treated as 3D anisotropic continuum, as a result its phonon spectrum and Helmholtz free energy have been calculated. The temperature dependence of the phonon pressure is calculated theoretically and compared with experimental data. A quantitative agreement between the theory and the experiment is achieved. Mechanical properties of ^4{He} crystals in the framework of the polytype model are briefly discussed.

  16. Statistical characterization of microstructure of packings of polydisperse hard cubes

    Science.gov (United States)

    Malmir, Hessam; Sahimi, Muhammad; Rahimi Tabar, M. Reza

    2017-05-01

    Polydisperse packings of cubic particles arise in several important problems. Examples include zeolite microcubes that represent catalytic materials, fluidization of such microcubes in catalytic reactors, fabrication of new classes of porous materials with precise control of their morphology, and several others. We present the results of detailed and extensive simulation and microstructural characterization of packings of nonoverlapping polydisperse cubic particles. The packings are generated via a modified random sequential-addition algorithm. Two probability density functions (PDFs) for the particle-size distribution, the Schulz and log-normal PDFs, are used. The packings are analyzed, and their random close-packing density is computed as a function of the parameters of the two PDFs. The maximum packing fraction for the highest degree of polydispersivity is estimated to be about 0.81, much higher than 0.57 for the monodisperse packings. In addition, a variety of microstructural descriptors have been calculated and analyzed. In particular, we show that (i) an approximate analytical expression for the structure factor of Percus-Yevick fluids of polydisperse hard spheres with the Schulz PDF also predicts all the qualitative features of the structure factor of the packings that we study; (ii) as the packings become more polydisperse, their behavior resembles increasingly that of an ideal system—"ideal gas"—with little or no correlations; and (iii) the mean survival time and mean relaxation time of a diffusing species in the packings increase with increasing degrees of polydispersivity.

  17. An efficient block-discriminant identification of packed malware

    Indian Academy of Sciences (India)

    Smita Naval; Vijay Laxmi; Manoj Singh Gaur; P Vinod

    2015-08-01

    Advanced persistent attacks, incorporated by sophisticated malware, are on the rise against hosts, user applications and utility software. Modern malware hide their malicious payload by applying packing mechanism. Packing tools instigate code encryption to protect the original malicious payload. Packing is employed in tandem with code obfuscation/encryption/compression to create malware variants. Despite being just a variant of known malware, the packed malware invalidates the traditional signature based malware detection as packing tools create an envelope of packer code around the original base malware. Therefore, unpacking becomes a mandatory phase prior to anti-virus scanning for identifying the known malware hidden behind packing layers. Existing techniques of unpacking solutions increase execution overhead of AV scanners in terms of time. This paper illustrates an easy to use approach which works in two phases to reduce this overhead. The first phase (ESCAPE) discriminates the packed code from the native code (non-packed) by using random block entropy. The second phase (PEAL) validates inferences of ESCAPE by employing bi-classification (packed vs native) model using relevant hex byte features extracted blockwise. The proposed approach is able to shrink the overall execution time of AV scanners by filtering out native samples and avoiding excessive unpacking overhead. Our method has been evaluated against a set consisting of real packed instances of malware and benign programs.

  18. FABRICATION OF PHOTONIC CRYSTAL WITH SUPERLATTICES

    Institute of Scientific and Technical Information of China (English)

    SUN Cheng; Chen Haihua; Zhang Jizhong; Wei Hongmei; Gu Zhongze

    2006-01-01

    A novel technique was used to fabricate three-dimensional photonic crystals with superlattices. The super structure was fabricated by assembling monodispersed microspheres in the grooves of the scales of morpho butterfly, which makes the photonic crystal being composed of two kinds of different photonic structures (natural groove structure of butterfly wing and artificial microspherical colloids arrangement). The superstructural photonic crystal exhibits some unique optical properties different from both the butterfly wing and the colloidal crystal. The approach exhibited here provides a new way for fabricate photonic crystals with superlattices.

  19. Cystamine preparations exhibit anticoagulant activity.

    Science.gov (United States)

    Aleman, Maria M; Holle, Lori A; Stember, Katherine G; Devette, Christa I; Monroe, Dougald M; Wolberg, Alisa S

    2015-01-01

    Transglutaminases are a superfamily of isoenzymes found in cells and plasma. These enzymes catalyze the formation of ε-N-(γ-glutamyl)-lysyl crosslinks between proteins. Cystamine blocks transglutaminase activity and is used in vitro in human samples and in vivo in mice and rats in studies of coagulation, immune dysfunction, and inflammatory disease. These studies have suggested cystamine blocks fibrin crosslinking and has anti-inflammatory effects, implicating transglutaminase activity in the pathogenesis of several diseases. We measured the effects of cystamine on fibrin crosslinking, tissue factor-triggered plasma clot formation and thrombin generation, and coagulation factor enzymatic activity. At concentrations that blocked fibrin crosslinking, cystamine also inhibited plasma clot formation and reduced thrombin generation. Cystamine inhibited the amidolytic activity of coagulation factor XI and thrombin towards chromogenic substrates. These findings demonstrate that cystamine exhibits anticoagulant activity during coagulation. Given the close relationship between coagulation and inflammation, these findings suggest prior studies that used cystamine to implicate transglutaminase activity in disease pathogenesis warrant re-examination.

  20. Cystamine preparations exhibit anticoagulant activity.

    Directory of Open Access Journals (Sweden)

    Maria M Aleman

    Full Text Available Transglutaminases are a superfamily of isoenzymes found in cells and plasma. These enzymes catalyze the formation of ε-N-(γ-glutamyl-lysyl crosslinks between proteins. Cystamine blocks transglutaminase activity and is used in vitro in human samples and in vivo in mice and rats in studies of coagulation, immune dysfunction, and inflammatory disease. These studies have suggested cystamine blocks fibrin crosslinking and has anti-inflammatory effects, implicating transglutaminase activity in the pathogenesis of several diseases. We measured the effects of cystamine on fibrin crosslinking, tissue factor-triggered plasma clot formation and thrombin generation, and coagulation factor enzymatic activity. At concentrations that blocked fibrin crosslinking, cystamine also inhibited plasma clot formation and reduced thrombin generation. Cystamine inhibited the amidolytic activity of coagulation factor XI and thrombin towards chromogenic substrates. These findings demonstrate that cystamine exhibits anticoagulant activity during coagulation. Given the close relationship between coagulation and inflammation, these findings suggest prior studies that used cystamine to implicate transglutaminase activity in disease pathogenesis warrant re-examination.

  1. EU Climate Change Exhibition Held

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>On April 25, the CPAFFC, the China-EU Association (CEUA) and the Delegation of the European Commission to China jointly held the opening ceremony for the EU Exhibition on Climate Change in the CPAFFC. He Luli, former vice chairperson of the NPC Standing Committee and honorary president of the CEUA, Jose Manuel Barroso, president of the European Commission, and Li Jianping, vice president of the CPAFFC, attended the opening ceremony and made speeches. Honorary President He Luli highly praised the achievements made by China and the EU in their longtime cooperation of mutual benefits in various fields including environmental protection. She said, for many years China and EU have both committed to the development of all-round strategic partnership and establishment of a multi-level mechanism of political dialogue. She expressed, with increasing enthusiasm the CEUA would continue to actively carry out nongovernmental exchanges between China and the EU, and promote cooperation between the two sides in the fields of economy, society, environmental protection, science and technology, culture, etc.

  2. Formation of Hexagonal-Close Packed (HCP) Rhodium as a Size Effect.

    Science.gov (United States)

    Huang, Jing Lu; Li, Zhi; Duan, Hao Hong; Cheng, Zhi Ying; Li, Ya Dong; Zhu, Jing; Yu, Rong

    2017-01-18

    Previous studies on the structural and functional properties of rhodium are based on the face-centered-cubic (fcc) structure in the bulk form. Here we report the first discovery of the hexagonal-close packed (hcp) rhodium in the nanoparticle form. The hcp Rh can be directly synthesized by solvothermal reaction or by electron-beam induced decomposition of Rh monolayers. The hcp Rh nanoparticles are stable under electron beam irradiation. Compared with the fcc structure, the hcp Rh nanoparticles show a large lattice expansion (6% larger atomic volume). The first-principles calculations suggest that the lower surface energy of hcp Rh leads to the size effect in the crystal structure.

  3. Effective Thermal Conductivity of Adsorbent Packed Beds

    Science.gov (United States)

    Mori, Hideo; Hamamoto, Yoshinori; Yoshida, Suguru

    The effective thermal conductivity of adsorbent packed beds of granular zeolite 13X and granular silica gel A in the presence of stagnant steam or air was measured under different conditions of the adsorbent bed temperature, particle size and filler-gas pressure. The measured effective thermal conductivity showed to become smaller with decreasing particle size or decreasing pressure, but it was nearly independent of the bed temperature. When steam was the filler-gas, the rise in the thermal conductivity of the adsorbent particles due to steam adsorption led to the increase in the effective thermal conductivity of the bed, and this effect was not negligible at high steam pressure for the bed of large particle size. It was found that both the predictions of the effective thermal conductivity by the Hayashi et al.'s model and the Bauer-Schlünder model generally agreed well with the measurements, by considering the particle thermal conductivity rise due to steam adsorption. The thermal conductivity of a consolidated bed of granular zeolite 13X was also measured, and it was found to be much larger than that of the packed bed especially at lower pressure. The above prediction models underestimated the effective thermal conductivity of the consolidated bed.

  4. Protein packing defects "heat up" interfacial water.

    Science.gov (United States)

    Sierra, María Belén; Accordino, Sebastián R; Rodriguez-Fris, J Ariel; Morini, Marcela A; Appignanesi, Gustavo A; Fernández Stigliano, Ariel

    2013-06-01

    Ligands must displace water molecules from their corresponding protein surface binding site during association. Thus, protein binding sites are expected to be surrounded by non-tightly-bound, easily removable water molecules. In turn, the existence of packing defects at protein binding sites has been also established. At such structural motifs, named dehydrons, the protein backbone is exposed to the solvent since the intramolecular interactions are incompletely wrapped by non-polar groups. Hence, dehydrons are sticky since they depend on additional intermolecular wrapping in order to properly protect the structure from water attack. Thus, a picture of protein binding is emerging wherein binding sites should be both dehydrons rich and surrounded by easily removable water. In this work we shall indeed confirm such a link between structure and dynamics by showing the existence of a firm correlation between the degree of underwrapping of the protein chain and the mobility of the corresponding hydration water molecules. In other words, we shall show that protein packing defects promote their local dehydration, thus producing a region of "hot" interfacial water which might be easily removed by a ligand upon association.

  5. Structural characterization of submerged granular packings

    Science.gov (United States)

    Jakšić, Z. M.; Šćepanović, J. R.; Lončarević, I.; Budinski-Petković, Lj.; Vrhovac, S. B.; Belić, A.

    2014-12-01

    We consider the impact of the effective gravitational acceleration on microstructural properties of granular packings through experimental studies of spherical granular materials saturated within fluids of varying density. We characterize the local organization of spheres in terms of contact connectivity, distribution of the Delaunay free volumes, and the shape factor (parameter of nonsphericity) of the Voronoï polygons. The shape factor gives a clear physical picture of the competition between less and more ordered domains of particles in experimentally obtained packings. As the effective gravity increases, the probability distribution of the shape factor becomes narrower and more localized around the lowest values of the shape factor corresponding to regular hexagon. It is found that curves of the pore distributions are asymmetric with a long tail on the right-hand side, which progressively reduces while the effective gravity gets stronger for lower densities of interstitial fluid. We show that the distribution of local areas (Voronoï cells) broadens with decreasing value of the effective gravity due to the formation of lose structures such as large pores and chainlike structures (arches or bridges). Our results should be particularly helpful in testing the newly developed simulation techniques involving liquid-related forces associated with immersed granular particles.

  6. Structured packing in revamping a topping

    Energy Technology Data Exchange (ETDEWEB)

    Spekuljak, Zvonko; Monella, Horacio [SIT Ingenieria S.R.L., Santa Fe (Argentina); Carosio, Eduardo [REPSOL Yacimientos Petroliferos Fiscales S.A. (Argentina); Lara, Cesar Javier

    2000-07-01

    The Topping column had conventional gas-liquid plates, and live steam was no possible to inject, because of the substantial black colour in the distillates. The target was to increase the distillates ratio, in order to reduce the light components in the bottom stream and the asphalt content in the middle distillates. Revamping involves the Flash, the Slop-wash and the Bottom zones. In the Flash zone was arranged a flow distributor to segregate liquid-vapor phases and predistributed the vapor phase. In the Slop-wash bed a combination of Structured Packing and inertial drop capture proprietary Structured Geometry was installed. The column Bottom was filled with a proprietary Structured Grid. A chimneys tray is the actual liquid distributor on the grid bed. The main results of the revamping are: The light hydrocarbon in bottom stream reduction was 40%. The expected value in the project was 20%. Incrementation of medium distillates was 126 m{sup 3}. The expected value was 100 m{sup 3}. Colour reduction in G.O.V. from >8 to <3 ASTM 1500. Temperature reduction in Transfer Line 10 deg C. Structured packings and the appropriate auxiliaries devices allow to obtain significant improvements in Topping columns. The repayment time of the revamp is very satisfactory. (author)

  7. Predicting crystal structures of organic compounds.

    Science.gov (United States)

    Price, Sarah L

    2014-04-07

    Currently, organic crystal structure prediction (CSP) methods are based on searching for the most thermodynamically stable crystal structure, making various approximations in evaluating the crystal energy. The most stable (global minimum) structure provides a prediction of an experimental crystal structure. However, depending on the specific molecule, there may be other structures which are very close in energy. In this case, the other structures on the crystal energy landscape may be polymorphs, components of static or dynamic disorder in observed structures, or there may be no route to nucleating and growing these structures. A major reason for performing CSP studies is as a complement to solid form screening to see which alternative packings to the known polymorphs are thermodynamically feasible.

  8. Photonic crystal surface-emitting lasers

    Science.gov (United States)

    Chua, Song Liang; Lu, Ling; Soljacic, Marin

    2015-06-23

    A photonic-crystal surface-emitting laser (PCSEL) includes a gain medium electromagnetically coupled to a photonic crystal whose energy band structure exhibits a Dirac cone of linear dispersion at the center of the photonic crystal's Brillouin zone. This Dirac cone's vertex is called a Dirac point; because it is at the Brillouin zone center, it is called an accidental Dirac point. Tuning the photonic crystal's band structure (e.g., by changing the photonic crystal's dimensions or refractive index) to exhibit an accidental Dirac point increases the photonic crystal's mode spacing by orders of magnitudes and reduces or eliminates the photonic crystal's distributed in-plane feedback. Thus, the photonic crystal can act as a resonator that supports single-mode output from the PCSEL over a larger area than is possible with conventional PCSELs, which have quadratic band edge dispersion. Because output power generally scales with output area, this increase in output area results in higher possible output powers.

  9. Simulation of abuse tolerance of lithium-ion battery packs

    Science.gov (United States)

    Spotnitz, Robert M.; Weaver, James; Yeduvaka, Gowri; Doughty, D. H.; Roth, E. P.

    A simple approach for using accelerating rate calorimetry data to simulate the thermal abuse resistance of battery packs is described. The thermal abuse tolerance of battery packs is estimated based on the exothermic behavior of a single cell and an energy balance than accounts for radiative, conductive, and convective heat transfer modes of the pack. For the specific example of a notebook computer pack containing eight 18650-size cells, the effects of cell position, heat of reaction, and heat-transfer coefficient are explored. Thermal runaway of the pack is more likely to be induced by thermal runaway of a single cell when that cell is in good contact with other cells and is close to the pack wall.

  10. Cavity approach to sphere packing in Hamming space.

    Science.gov (United States)

    Ramezanpour, A; Zecchina, R

    2012-02-01

    In this paper we study the hard sphere packing problem in the Hamming space by the cavity method. We show that both the replica symmetric and the replica symmetry breaking approximations give maximum rates of packing that are asymptotically the same as the lower bound of Gilbert and Varshamov. Consistently with known numerical results, the replica symmetric equations also suggest a crystalline solution, where for even diameters the spheres are more likely to be found in one of the subspaces (even or odd) of the Hamming space. These crystalline packings can be generated by a recursive algorithm which finds maximum packings in an ultrametric space. Finally, we design a message passing algorithm based on the cavity equations to find dense packings of hard spheres. Known maximum packings are reproduced efficiently in nontrivial ranges of dimensions and number of spheres. © 2012 American Physical Society

  11. Comfort care packs: a little bit of hospice in hospital?

    Science.gov (United States)

    Oliver, Mark A; Hillock, Sharon; Moore, Carol; Goble, Hannah; Asbury, Nicky

    2010-10-01

    The Comfort Care Pack initiative is an innovation designed to enhance the inpatient experience of end-of-life patients and their carers. The carer is given a pleasantly decorated box containing a variety of items for use by the patient or the carer themselves: snacks, toiletries and items to promote comfort. This project set out to evaluate the impact of these packs by reviewing the returns of the feedback questionnaires included with the packs. From the first 220 packs, 58 questionnaires were returned, giving quantitative and qualitative data. The response to the packs was overwhelmingly positive and they were much valued by the carers. This was the case despite the fact that relatively few of the items were actually used by the recipients. It is suggested that the value of the packs to recipients lies in the gesture of being thought about during what is a difficult time for them. The implications of this are discussed.

  12. Tray Pack Improved Durability Packaging Rough Handling Test Results

    Science.gov (United States)

    1985-03-01

    extra vacuum void volume space makes these underfilled Tray Packs much more susceptible to damage. It is the vacuum that causes the damage not the under...filled to 6 lb. 10 oz. The result of underfilling is that the vacuum level in the peas is much higher making it more susceptible to paneling damage...impact. (3) That the vacuum induced by underfilling and vacuum pack- ing Tray Packs filled with peas makes them highly suscep- tible to damage. (4) That

  13. Research on a Novel Power Inductor-Based Bidirectional Lossless Equalization Circuit for Series-Connected Battery Packs

    Directory of Open Access Journals (Sweden)

    Xiangwei Guo

    2015-06-01

    Full Text Available Cell balancing plays an important role in preserving the life of series-connected battery packs; without a suitable balancing system, the individual cell voltages will differ over time, and the battery pack capacity will decrease quickly. This paper presents a novel power inductor-based bidirectional lossless equalization circuit. This circuit consists of several balancing sub-circuits, which allow the dynamic adjustment of the equalization path and equalization threshold. The simulation and experiment results demonstrate that the proposed circuit, which features a simple control method, fast balancing, and a large equalization current, exhibits outstanding equalization performance.

  14. Serial Symmetrical Relocation Algorithm for the Equal Sphere Packing Problem

    CERN Document Server

    Huang, WenQi

    2012-01-01

    For dealing with the equal sphere packing problem, we propose a serial symmetrical relocation algorithm, which is effective in terms of the quality of the numerical results. We have densely packed up to 200 equal spheres in spherical container and up to 150 equal spheres in cube container. All results are rigorous because of a fake sphere trick. It was conjectured impossible to pack 68 equal spheres of radius 1 into a sphere of radius 5. The serial symmetrical relocation algorithm has proven wrong this conjecture by finding one such packing.

  15. Bottom-Left Placement Theorem for Rectangle Packing

    CERN Document Server

    Huang, Wenqi; Chen, Duanbing

    2011-01-01

    This paper proves a bottom-left placement theorem for the rectangle packing problem, stating that if it is possible to orthogonally place n arbitrarily given rectangles into a rectangular container without overlapping, then we can achieve a feasible packing by successively placing a rectangle onto a bottom-left corner in the container. This theorem shows that even for the real-parameter rectangle packing problem, we can solve it after finite times of bottom-left placement actions. Based on this theorem, we might develop efficient heuristic algorithms for solving the rectangle packing problem.

  16. Packed bed carburization of tantalum and tantalum alloy

    Science.gov (United States)

    Lopez, Peter C.; Rodriguez, Patrick J.; Pereyra, Ramiro A.

    1999-01-01

    Packed bed carburization of a tantalum or tantalum alloy object. A method for producing corrosion-resistant tantalum or tantalum alloy objects is described. The method includes the steps of placing the object in contact with a carburizing pack, heating the packed object in vacuum furnace to a temperature whereby carbon from the pack diffuses into the object forming grains with tantalum carbide along the grain boundaries, and etching the surface of the carburized object. This latter step removes tantalum carbides from the surface of the carburized tantalum object while leaving the tantalum carbide along the grain boundaries.

  17. Axion Crystals

    CERN Document Server

    Ozaki, Sho

    2016-01-01

    The low-energy effective theories for gapped insulators are classified by three parameters: permittivity $\\epsilon$, permeability $\\mu$, and theta angle $\\theta$. Crystals with periodic $\\epsilon$ are known as photonic crystals. We here study the band structure of photons in a new type of crystals with periodic $\\theta$ (modulo $2\\pi$) in space, which we call the axion crystals. We find that the axion crystals have a number of new properties that the usual photonic crystals do not possess, such as the helicity-dependent photonic band gaps and the nonrelativistic gapless dispersion relation at small momentum. We briefly discuss possible realizations of axion crystals in condensed matter systems as well as high-energy physics.

  18. Crystal structure of 2-{(R)-[1-(4-bromo-phen-yl)eth-yl]imino-meth-yl}-4-(phenyl-diazen-yl)phenol, a chiral photochromic Schiff base.

    Science.gov (United States)

    Moriwaki, Ryoji; Akitsu, Takashiro

    2015-11-01

    The title chiral photochromic Schiff base compound, C21H18BrN3O, was synthesized from (R)-(+)-1-(4-bromo-phen-yl)ethyl-amine and the salicyl-aldehyde of an azo-benzene derivative. The mol-ecule corresponds to the phenol-imine tautomer, the C=N and N-C bond distances being 1.285 (3) and 1.470 (3) Å, respectively. The diazenyl group adopts a trans form, with an N=N distance of 1.256 (3) Å. The hy-droxy group is involved in intra-molecular O-H⋯N hydrogen bonding. In the crystal, C-H⋯π inter-actions consolidate the crystal packing of one-dimensional chains, which exhibits short inter-molecular Br⋯C contacts of 3.400 (3) Å.

  19. Virtual modeling of polycrystalline structures of materials using particle packing algorithms and Laguerre cells

    Science.gov (United States)

    Morfa, Carlos Recarey; Farias, Márcio Muniz de; Morales, Irvin Pablo Pérez; Navarra, Eugenio Oñate Ibañez de; Valera, Roberto Roselló

    2017-06-01

    The influence of the microstructural heterogeneities is an important topic in the study of materials. In the context of computational mechanics, it is therefore necessary to generate virtual materials that are statistically equivalent to the microstructure under study, and to connect that geometrical description to the different numerical methods. Herein, the authors present a procedure to model continuous solid polycrystalline materials, such as rocks and metals, preserving their representative statistical grain size distribution. The first phase of the procedure consists of segmenting an image of the material into adjacent polyhedral grains representing the individual crystals. This segmentation allows estimating the grain size distribution, which is used as the input for an advancing front sphere packing algorithm. Finally, Laguerre diagrams are calculated from the obtained sphere packings. The centers of the spheres give the centers of the Laguerre cells, and their radii determine the cells' weights. The cell sizes in the obtained Laguerre diagrams have a distribution similar to that of the grains obtained from the image segmentation. That is why those diagrams are a convenient model of the original crystalline structure. The above-outlined procedure has been used to model real polycrystalline metallic materials. The main difference with previously existing methods lies in the use of a better particle packing algorithm.

  20. Molecular Packing of Amphiphilic Nanosheets Resolved by X-ray Scattering

    Energy Technology Data Exchange (ETDEWEB)

    Harutyunyan, Boris; Dannenhoffer, Adam; Kewalramani, Sumit; Aytun, Taner; Fairfield, Daniel J.; Stupp, Samuel I.; Bedzyk, Michael J. (NWU)

    2016-12-29

    Molecular packing in light harvesting 2D assemblies of photocatalytic materials is a critical factor for solar-to-fuel conversion efficiency. However, structure–function correlations have yet to be fully established. This is partly due to the difficulties in extracting the molecular arrangements from the complex 3D powder averaged diffraction patterns of 2D lattices, obtained via in situ wide-angle X-ray scattering. Here, we develop a scattering theory formalism and couple it with a simple geometrical model for the molecular shape of chromophore 9-methoxy-N-(sodium hexanoate)perylene-3,4-dicarboximide (MeO-PMI) used in our study. This generally applicable method fully reproduces the measured diffraction pattern including the asymmetric line shapes for the Bragg reflections and yields the molecular packing arrangement within a 2D crystal structure with a remarkable degree of detail. We find an approximate edge-centered herringbone structure for the PMI fused aromatic rings and ordering of the carboxypentyl chains above and below the nanosheets. Such a packing arrangement differs from the more symmetric face-to-face orientation of the unsubstituted PMI rings. This structural difference is correlated to our measurement of the reduced catalytic performance of MeO-PMI nanosheets as compared to the mesoscopically similar unsubstituted PMI assemblies.

  1. Stabilizing the hexagonal close packed structure of hard spheres with polymers: Phase diagram, structure, and dynamics

    Science.gov (United States)

    Edison, John R.; Dasgupta, Tonnishtha; Dijkstra, Marjolein

    2016-08-01

    We study the phase behaviour of a binary mixture of colloidal hard spheres and freely jointed chains of beads using Monte Carlo simulations. Recently Panagiotopoulos and co-workers predicted [Nat. Commun. 5, 4472 (2014)] that the hexagonal close packed (HCP) structure of hard spheres can be stabilized in such a mixture due to the interplay between polymer and the void structure in the crystal phase. Their predictions were based on estimates of the free-energy penalty for adding a single hard polymer chain in the HCP and the competing face centered cubic (FCC) phase. Here we calculate the phase diagram using free-energy calculations of the full binary mixture and find a broad fluid-solid coexistence region and a metastable gas-liquid coexistence region. For the colloid-monomer size ratio considered in this work, we find that the HCP phase is only stable in a small window at relatively high polymer reservoir packing fractions, where the coexisting HCP phase is nearly close packed. Additionally we investigate the structure and dynamic behaviour of these mixtures.

  2. Lasing from fluorescent protein crystals.

    Science.gov (United States)

    Oh, Heon Jeong; Gather, Malte C; Song, Ji-Joon; Yun, Seok Hyun

    2014-12-15

    We investigated fluorescent protein crystals for potential photonic applications, for the first time to our knowledge. Rod-shaped crystals of enhanced green fluorescent protein (EGFP) were synthesized, with diameters of 0.5-2 μm and lengths of 100-200 μm. The crystals exhibit minimal light scattering due to their ordered structure and generate substantially higher fluorescence intensity than EGFP or dye molecules in solutions. The magnitude of concentration quenching in EGFP crystals was measured to be about 7-10 dB. Upon optical pumping at 485 nm, individual EGFP crystals located between dichroic mirrors generated laser emission with a single-mode spectral line at 513 nm. Our results demonstrate the potential of protein crystals as novel optical elements for self-assembled, micro- or nano-lasers and amplifiers in aqueous environment.

  3. Grain neighbour effects on twin transmission in hexagonal close-packed materials

    Science.gov (United States)

    Arul Kumar, M.; Beyerlein, I. J.; McCabe, R. J.; Tomé, C. N.

    2016-12-01

    Materials with a hexagonal close-packed (hcp) crystal structure such as Mg, Ti and Zr are being used in the transportation, aerospace and nuclear industry, respectively. Material strength and formability are critical qualities for shaping these materials into parts and a pervasive deformation mechanism that significantly affects their formability is deformation twinning. The interaction between grain boundaries and twins has an important influence on the deformation behaviour and fracture of hcp metals. Here, statistical analysis of large data sets reveals that whether twins transmit across grain boundaries depends not only on crystallography but also strongly on the anisotropy in crystallographic slip. We show that increases in crystal plastic anisotropy enhance the probability of twin transmission by comparing the relative ease of twin transmission in hcp materials such as Mg, Zr and Ti.

  4. Hyperstaticity and loops in frictional granular packings

    Science.gov (United States)

    Tordesillas, Antoinette; Lam, Edward; Metzger, Philip T.

    2009-06-01

    The hyperstatic nature of granular packings of perfectly rigid disks is analyzed algebraically and through numerical simulation. The elementary loops of grains emerge as a fundamental element in addressing hyperstaticity. Loops consisting of an odd number of grains behave differently than those with an even number. For odd loops, the latent stresses are exterior and are characterized by the sum of frictional forces around each loop. For even loops, the latent stresses are interior and are characterized by the alternating sum of frictional forces around each loop. The statistics of these two types of loop sums are found to be Gibbsian with a "temperature" that is linear with the friction coefficient μ when μ<1.

  5. School meal sociality or lunch pack individualism?

    DEFF Research Database (Denmark)

    Andersen, Sidse Schoubye; Holm, Lotte; Baarts, Charlotte

    2015-01-01

    The present article specifies and broadens our understanding of the concept of commensality by investigating what it means to ‘share a meal’. The study utilizes a school meal intervention carried out in Denmark in 2011/2012. It shows how different types of school meal arrangement influence...... to school. The study discusses commensality by examining and comparing lunchtime interactions within the same group of children in the two contrasting meal situations. The results fail to confirm the conventional view that shared meals have greater social impacts and benefits than eating individualized...... foods. The article argues that the social entrepreneurship involved in sharing individual lunch packs might even outweigh some of the benefits of shared meals where everyone is served the same food....

  6. Compaction dynamics of wet granular packings

    Science.gov (United States)

    Vandewalle, Nicolas; Ludewig, Francois; Fiscina, Jorge E.; Lumay, Geoffroy

    2013-03-01

    The extremely slow compaction dynamics of wet granular assemblies has been studied experimentally. The cohesion, due to capillary bridges between neighboring grains, has been tuned using different liquids having specific surface tension values. The characteristic relaxation time for compaction τ grows strongly with cohesion. A kinetic model, based on a free volume kinetic equations and the presence of a capillary energy barrier (due to liquid bridges), is able to reproduce quantitatively the experimental curves. This model allows one to describe the cohesion in wet granular packing. The influence of relative humidity (RH) on the extremely slow compaction dynamics of a granular assembly has also been investigated in the range 20 % - 80 % . Triboelectric and capillary condensation effects have been introduced in the kinetic model. Results confirm the existence of an optimal condition at RH ~ 45 % for minimizing cohesive interactions between glass beads.

  7. Packing of charged chains on toroidal geometries

    Science.gov (United States)

    Yao, Zhenwei; de la Cruz, Monica Olvera

    2013-01-01

    We study a strongly adsorbed flexible polyelectrolyte chain on tori. In this generalized Thomson problem, the patterns of the adsorbed chain are analyzed in the space of the toroidal coordinates and in terms of the orientation of each chain segment. Various patterns are found, including double spirals, disclination-like structures, Janus tori, and uniform wrappings, arising from the long-range electrostatic interaction and the toroidal geometry. Their broken mirror symmetry is quantitatively characterized by introducing an order parameter, an integral of the torsion. The uniform packing, which breaks the mirror symmetry the least, has the lowest value of the order parameter. In addition, it is found that the electrostatic energy of confined chains on tori conforms to a power law regardless of the screening effect in some typical cases studied. Furthermore, we study random walks on tori that generate chain configurations in the large screening limit or at large thermal fluctuation; some features associated with the toroidal geometry are discussed.

  8. Regulation relative to the packing and packing wastes; Reglementation relative aux emballages et dechets d'emballages

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-01

    The objectives of the european directive 94/62/CE of the 20 december 1994, relative to the packing and the packing wastes, are the harmonization between the States members, the environment protection and a management of the internal market in agreement with the Treaty. This text recalls the regulations in the french domain. Industrial and municipal packings wastes are concerned. (A.L.B.)

  9. Distinctive features arising in maximally random jammed packings of superballs.

    Science.gov (United States)

    Jiao, Y; Stillinger, F H; Torquato, S

    2010-04-01

    Dense random packings of hard particles are useful models of granular media and are closely related to the structure of nonequilibrium low-temperature amorphous phases of matter. Most work has been done for random jammed packings of spheres and it is only recently that corresponding packings of nonspherical particles (e.g., ellipsoids) have received attention. Here we report a study of the maximally random jammed (MRJ) packings of binary superdisks and monodispersed superballs whose shapes are defined by |x1|2p+...+|xd|2por=0.5) particles with square symmetry (d=2), or octahedral and cubic symmetry (d=3). In particular, for p=1 the particle is a perfect sphere (circular disk) and for p-->infinity the particle is a perfect cube (square). We find that the MRJ densities of such packings increase dramatically and nonanalytically as one moves away from the circular-disk and sphere point (p=1). Moreover, the disordered packings are hypostatic, i.e., the average number of contacting neighbors is less than twice the total number of degrees of freedom per particle, and yet the packings are mechanically stable. As a result, the local arrangements of particles are necessarily nontrivially correlated to achieve jamming. We term such correlated structures "nongeneric." The degree of "nongenericity" of the packings is quantitatively characterized by determining the fraction of local coordination structures in which the central particles have fewer contacting neighbors than average. We also show that such seemingly "special" packing configurations are counterintuitively not rare. As the anisotropy of the particles increases, the fraction of rattlers decreases while the minimal orientational order as measured by the tetratic and cubatic order parameters increases. These characteristics result from the unique manner in which superballs break their rotational symmetry, which also makes the superdisk and superball packings distinctly different from other known nonspherical hard

  10. Growth morphology and structural characteristic of C70single crystals

    Institute of Scientific and Technical Information of China (English)

    周维亚; 解思深; 吴源; 常保和; 王刚; 钱露茜

    1999-01-01

    Large size C70 single crystals with the dimension of more than 5 mm are grown from the vapor phase by controlling nucleation. X-ray diffraction and electron diffraction confirm that in the C70 single crystal a phase of the hexagonal close-packed (hcp) structure coexists with a minor face-center-cubic (fcc) phase at room temperature. The morphologies and their formation mechanism of the C70 single crystals are investigated by means of scanning electron microscopy and optical microscopy. The influence of growth conditions on the morphologies of C70 single crystals is discussed.

  11. SAR imagery of the Grand Banks (Newfoundland) pack ice pack and its relationship to surface features

    Science.gov (United States)

    Argus, S. D.; Carsey, F. D.

    1988-01-01

    Synthetic Aperture Radar (SAR) data and aerial photographs were obtained over pack ice off the East Coast of Canada in March 1987 as part of the Labrador Ice Margin Experiment (LIMEX) pilot project. Examination of this data shows that although the pack ice off the Canadian East Coast appears essentially homogeneous to visible light imagery, two clearly defined zones of ice are apparent on C-band SAR imagery. To identify factors that create the zones seen on the radar image, aerial photographs were compared to the SAR imagery. Floe size data from the aerial photographs was compared to digital number values taken from SAR imagery of the same ice. The SAR data of the inner zone acquired three days apart over the melt period was also examined. The studies indicate that the radar response is governed by floe size and meltwater distribution.

  12. Liu Hong: no trivial on exhibitions

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    To Work for Tomorrow Liu Hong, General Manager of TUTTI Exhibition Service (Xiamen) Co., Ltd, has set up TUTTI Exhibition Service (Xiamen) Co., Ltd in 2001, when exhibition industry firstly appear in Xiamen. Furthermore, the company has developed rapidly in recent years. As Liu Hong regards, exhibition industry, as well as advertisement industry, is an industry filled with challenges and followed

  13. Fermentative hydrogen production in packed-bed and packing-free upflow reactors.

    Science.gov (United States)

    Li, C; Zhang, T; Fang, H H P

    2006-01-01

    Fermentative hydrogen production from a synthetic wastewater containing 10 g/L of sucrose was studied in two upflow reactors at 26 degrees C for 400 days. One reactor was filled with packing rings (RP) and the other was packing free (RF). The effect of hydraulic retention time (HRT) from 2 h to 24 h was investigated. Results showed that, under steady state, the hydrogen production rate significantly increased from 0.63 L/L/d to 5.35 L/L/d in the RF when HRT decreased from 24 h to 2 h; the corresponding rates were 0.56 L/L/d to 6.17 L/L/d for the RP. In the RF, the hydrogen yield increased from 0.96 mol/mol-sucrose at 24 h of HRT to the maximum of 1.10 mol/mol-sucrose at 8 h of HRT, and then decreased to 0.68 mol/mol-sucrose at 2 h. In the RP, the yield increased from 0.86 mol/mol-sucrose at 24 h of HRT to the maximum of 1.22 mol/mol-sucrose at 14 h of HRT, and then decreased to 0.78 mol/mol-sucrose at 2 h. Overall, the reactor with packing was more effective than the one free of packing. In both reactors, sludge agglutinated into granules. The microbial community of granular sludge in RP was investigated using 16S rDNA based techniques. The distribution of bacterial cells and extracellular polysaccharides in hydrogen-producing granules was investigated by fluorescence-based techniques. Results indicated that most of the N-acetyl-galactosamine/galactose-containing extracellular polysaccharides were distributed on the outer layer of the granules with a filamentous structure.

  14. Crystallization-induced properties from morphology-controlled organic crystals.

    Science.gov (United States)

    Park, Chibeom; Park, Ji Eun; Choi, Hee Cheul

    2014-08-19

    During the past two decades, many materials chemists have focused on the development of organic molecules that can serve as the basis of cost-effective and flexible electronic, optical, and energy conversion devices. Among the potential candidate molecules, metal-free or metal-containing conjugated organic molecules offer high-order electronic conjugation levels that can directly support fast charge carrier transport, rapid optoelectric responses, and reliable exciton manipulation. Early studies of these molecules focused on the design and synthesis of organic unit molecules that exhibit active electrical and optical properties when produced in the form of thin film devices. Since then, researchers have worked to enhance the properties upon crystallization of the unit molecules as single crystals provide higher carrier mobilities and exciton recombination yields. Most recently, researchers have conducted in-depth studies to understand how crystallization induces property changes, especially those that depend on specific crystal surfaces. The different properties that depend on the crystal facets have been of particular interest. Most unit molecules have anisotropic structures, and therefore produce crystals with several unique crystal facets with dissimilar molecular arrangements. These structural differences would also lead to diverse electrical conductance, optical absorption/emission, and even chemical interaction properties depending on the crystal facet investigated. To study the effects of crystallization and crystal facet-dependent property changes, researchers must grow or synthesize crystals of highly conjugated molecules that have both a variety of morphologies and high crystallinity. Morphologically well-defined organic crystals, that form structures such as wires, rods, disks, and cubes, provide objects that researchers can use to evaluate these material properties. Such structures typically occur as single crystals with well-developed facets with

  15. New series of paper pack vending machines; Paper pack jido hanbaiki no shin series

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, M. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan); Umino, S. [Fuji Electric Co. Ltd., Tokyo (Japan)

    1996-07-10

    This paper presents series of paper pack vending machines. These machines may be broadly classified into those of cold drinks and of hot and cold drinks depending on the storage temperature of products. The former is the machine for cooling dairy products at 10{degree}C with a combined stacking by direct-stacked racks and chain-multiracks. The latter is provided with divided storing chambers with each chamber selectively cooled or heated. Products in the hot chamber are canned coffee and the like set at 55{degree}C. The temperature control is performed by a microcomputer. The chain-multiracks are provided with advantages such as capability of handling various kinds of container shapes, storing drinks and foods vertically, replacing products by the change of a shelf attachment with one operation, and storing one liter packs by setting pair columns. The direct-stacked racks are provided with advantages such as versatility of handling various kinds of containers and miniaturization of the mechanism other than the storage part. The installation space was reduced by devising the opening and closing of the door. The control part is capable of setting temperatures differently for cans and paper packs. 7 figs., 1 tab.

  16. Measured black carbon deposition on the Sierra Nevada snow pack and implication for snow pack retreat

    Directory of Open Access Journals (Sweden)

    O. L. Hadley

    2010-04-01

    Full Text Available Modeling studies show that the darkening of snow and ice by black carbon (BC deposition is a major factor for the rapid disappearance of arctic sea ice, mountain glaciers and snow packs. This study provides one of the first direct measurements for the efficient removal of black carbon from the atmosphere by snow and its subsequent deposition on the snow packs of California. The early melting of the snow packs in the Sierras is one of the contributing factors to the severe water problems in California. BC concentrations in falling snow were measured at two mountain locations and in rain at a coastal site. All three stations reveal large BC concentrations in precipitation, ranging from 1.7 ng/g to 12.9 ng/g. The BC concentrations in the air after the snow fall were negligible suggesting an extremely efficient removal of BC by snow. The data suggest that below cloud scavenging, rather than ice nuclei, was the dominant source of BC in the snow. A five-year comparison of BC, dust, and total fine aerosol mass concentrations at multiple sites reveals that the measurements made at the sampling sites were representative of large scale deposition in the Sierra Nevada. The relative concentration of iron and calcium in the mountain aerosol indicates that one-quarter to one-third of the BC may have been transported from Asia.

  17. Measured black carbon deposition on the Sierra Nevada snow pack and implication for snow pack retreat

    Directory of Open Access Journals (Sweden)

    O. L. Hadley

    2010-08-01

    Full Text Available Modeling studies show that the darkening of snow and ice by black carbon deposition is a major factor for the rapid disappearance of arctic sea ice, mountain glaciers and snow packs. This study provides one of the first direct measurements for the efficient removal of black carbon from the atmosphere by snow and its subsequent deposition to the snow packs of California. The early melting of the snow packs in the Sierras is one of the contributing factors to the severe water problems in California. BC concentrations in falling snow were measured at two mountain locations and in rain at a coastal site. All three stations reveal large BC concentrations in precipitation, ranging from 1.7 ng/g to 12.9 ng/g. The BC concentrations in the air after the snow fall were negligible suggesting an extremely efficient removal of BC by snow. The data suggest that below cloud scavenging, rather than ice nuclei, was the dominant source of BC in the snow. A five-year comparison of BC, dust, and total fine aerosol mass concentrations at multiple sites reveals that the measurements made at the sampling sites were representative of large scale deposition in the Sierra Nevada. The relative concentration of iron and calcium in the mountain aerosol indicates that one-quarter to one-third of the BC may have been transported from Asia.

  18. AmbiPack: a systematic algorithm for packing of macromolecular structures with ambiguous distance constraints.

    Science.gov (United States)

    Wang, C S; Lozano-Pérez, T; Tidor, B

    1998-07-01

    The determination of structures of multimers presents interesting new challenges. The structure(s) of the individual monomers must be found and the transformations to produce the packing interfaces must be described. A substantial difficulty results from ambiguities in assigning intermolecular distance measurements (from nuclear magnetic resonance, for example) to particular intermolecular interfaces in the structure. Here we present a rapid and efficient method to solve the packing and the assignment problems simultaneously given rigid monomer structures and (potentially ambiguous) intermolecular distance measurements. A promising application of this algorithm is to couple it with a monomer searching protocol such that each monomer structure consistent with intramolecular constraints can be subsequently input to the current algorithm to check whether it is consistent with (potentially ambiguous) intermolecular constraints. The algorithm AmbiPack uses a hierarchical division of the search space and the branch-and-bound algorithm to eliminate infeasible regions of the space. Local search methods are then focused on the remaining space. The algorithm generally runs faster as more constraints are included because more regions of the search space can be eliminated. This is not the case for other methods, for which additional constraints increase the complexity of the search space. The algorithm presented is guaranteed to find all solutions to a predetermined resolution. This resolution can be chosen arbitrarily to produce outputs at various level of detail. Illustrative applications are presented for the P22 tailspike protein (a trimer) and portions of beta-amyloid (an ordered aggregate).

  19. Measured Black Carbon Deposition on the Sierra Nevada Snow Pack and Implication for Snow Pack Retreat

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, O.L.; Corrigan, C.E.; Kirchstetter, T.W.; Cliff, S.S.; Ramanathan, V.

    2010-01-12

    Modeling studies show that the darkening of snow and ice by black carbon deposition is a major factor for the rapid disappearance of arctic sea ice, mountain glaciers and snow packs. This study provides one of the first direct measurements for the efficient removal of black carbon from the atmosphere by snow and its subsequent deposition to the snow packs of California. The early melting of the snow packs in the Sierras is one of the contributing factors to the severe water problems in California. BC concentrations in falling snow were measured at two mountain locations and in rain at a coastal site. All three stations reveal large BC concentrations in precipitation, ranging from 1.7 ng/g to 12.9 ng/g. The BC concentrations in the air after the snow fall were negligible suggesting an extremely efficient removal of BC by snow. The data suggest that below cloud scavenging, rather than ice nuclei, was the dominant source of BC in the snow. A five-year comparison of BC, dust, and total fine aerosol mass concentrations at multiple sites reveals that the measurements made at the sampling sites were representative of large scale deposition in the Sierra Nevada. The relative concentration of iron and calcium in the mountain aerosol indicates that one-quarter to one-third of the BC may have been transported from Asia.

  20. RNA Crystallization

    Science.gov (United States)

    Golden, Barbara L.; Kundrot, Craig E.

    2003-01-01

    RNA molecules may be crystallized using variations of the methods developed for protein crystallography. As the technology has become available to syntheisize and purify RNA molecules in the quantities and with the quality that is required for crystallography, the field of RNA structure has exploded. The first consideration when crystallizing an RNA is the sequence, which may be varied in a rational way to enhance crystallizability or prevent formation of alternate structures. Once a sequence has been designed, the RNA may be synthesized chemically by solid-state synthesis, or it may be produced enzymatically using RNA polymerase and an appropriate DNA template. Purification of milligram quantities of RNA can be accomplished by HPLC or gel electrophoresis. As with proteins, crystallization of RNA is usually accomplished by vapor diffusion techniques. There are several considerations that are either unique to RNA crystallization or more important for RNA crystallization. Techniques for design, synthesis, purification, and crystallization of RNAs will be reviewed here.

  1. Investigating how vesicle size influences vesicle adsorption on titanium oxide: a competition between steric packing and shape deformation.

    Science.gov (United States)

    Ferhan, Abdul Rahim; Jackman, Joshua A; Cho, Nam-Joon

    2017-01-18

    Understanding the adsorption behavior of lipid vesicles at solid-liquid interfaces is important for obtaining fundamental insights into soft matter adsorbates as well as for practical applications such as supported lipid bilayer (SLB) fabrication. While the process of SLB formation has been highly scrutinized, less understood are the details of vesicle adsorption without rupture, especially at high surface coverages. Herein, we tackle this problem by employing simultaneous quartz crystal microbalance-dissipation (QCM-D) and localized surface plasmon resonance (LSPR) measurements in order to investigate the effect of vesicle size (84-211 nm diameter) on vesicle adsorption onto a titanium oxide surface. Owing to fundamental differences in the measurement principles of the two techniques as well as a mismatch in probing volumes, it was possible to determine both the lipid mass adsorbed near the sensor surface as well as the total mass of adsorbed lipid and hydrodynamically coupled solvent in the adsorbed vesicle layer as a whole. With increasing vesicle size, the QCM-D frequency signal exhibited monotonic behavior reaching an asymptotic value, whereas the QCM-D energy dissipation signal continued to increase according to the vesicle size. In marked contrast, the LSPR-tracked lipid mass near the sensor surface followed a parabolic trend, with the greatest corresponding measurement response occurring for intermediate-size vesicles. The findings reveal that the maximum extent of adsorbed vesicles contacting a solid surface occurs at an intermediate vesicle size due to the competing influences of vesicle deformation and steric packing. Looking forward, such information can be applied to control the molecular self-assembly of phospholipid assemblies as well as provide the basis for investigating deformable, soft matter adsorbates.

  2. A heterogeneous model for heat transfer in packed beds

    NARCIS (Netherlands)

    Wijngaarden, R.J.; Westerterp, K.R.

    1993-01-01

    If transient heat transfer occurs in a packed bed or a reaction is carried out on the pellets, the heterogeneity of the bed is essential because of the heat flow between pellets and gas. Global heat parameters for the packed bed, such as λeff and αw, are usually derived from homogeneous models. Ther

  3. Colonic perforation: a lethal consequence of cannabis body packing.

    Science.gov (United States)

    Cawich, Shamir O; Downes, Ross; Martin, Allie C; Evans, Necia R; Mitchell, Derek I G; Williams, Eric

    2010-07-01

    Body packing is one method of smuggling cannabis across international borders. The practice is prevalent in Jamaica. There has been one reported death from this practice in medical literature. We report a second fatal case of cannabis body packing, reinforcing the dangerous nature of this practice.

  4. The sintering behavior of close-packed spheres

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Tikare, V.; Frandsen, Henrik Lund

    2012-01-01

    The sintering behavior of close-packed spheres is investigated using a numerical model. The investigated systems are the body-centered cubic (bcc), face-centered cubic (fcc) and hexagonal close-packed spheres (hcp). The sintering behavior is found to be ideal, with no grain growth until full dens...

  5. Predicting the Liquid Phase Mass Transfer Resistance of Structured Packings

    NARCIS (Netherlands)

    Olujic, Z.; Seibert, A.F.

    2014-01-01

    Published correlations for estimating the liquid phase mass transfer coefficients of structured packings are compared using experimental evidence on the efficiency of Montz-Pak B1–250MN and B1–500MN structured packings as measured in total reflux distillation tests using the chlorobenzene/ethylbenze

  6. Bedded pack barns for dairy cattle in the Netherlands

    NARCIS (Netherlands)

    Galama, P.J.; Boer, de H.C.; Dooren, van H.J.C.; Ouweltjes, W.; Poelarends, J.J.; Driehuis, F.

    2014-01-01

    The bedded pack barn offers good perspective on animal welfare, animal health and public perception, but has disadvantages in terms of mineral management (nitrogen losses and fertilising value) and the presence of TAS (Thermophilic Aerobic Spore formers). Bedded packs with compost have a too high am

  7. Hydrodynamics of multi-phase packed bed micro-reactors

    NARCIS (Netherlands)

    Márquez Luzardo, N.M.

    2010-01-01

    Why to use packed bed micro-reactors for catalyst testing? Miniaturized packed bed reactors have a large surface-to-volume ratio at the reactor and particle level that favors the heat- and mass-transfer processes at all scales (intra-particle, inter-phase and inter-particle or reactor level). If the

  8. 14 CFR 1214.605 - Preflight packing and storing.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Preflight packing and storing. 1214.605 Section 1214.605 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mementos Aboard Space Shuttle Flights § 1214.605 Preflight packing and storing. (a) Items intended for...

  9. Online Variable-Sized Bin Packing with Conflicts

    DEFF Research Database (Denmark)

    Epstein, Leah; Favrholdt, Lene Monrad; Levin, Asaf

    2011-01-01

    We study a new kind of on-line bin packing with conflicts, motivated by a problem arising when scheduling jobs on the Grid. In this bin packing problem, the set of items is given at the beginning, together with a set of conflicts on pairs of items. A conflict on a pair of items implies...

  10. Packed bed reactor for photochemical .sup.196 Hg isotope separation

    Science.gov (United States)

    Grossman, Mark W.; Speer, Richard

    1992-01-01

    Straight tubes and randomly oriented pieces of tubing having been employed in a photochemical mercury enrichment reactor and have been found to improve the enrichment factor (E) and utilization (U) compared to a non-packed reactor. One preferred embodiment of this system uses a moving bed (via gravity) for random packing.

  11. A relationship between maximum packing of particles and particle size

    Science.gov (United States)

    Fedors, R. F.

    1979-01-01

    Experimental data indicate that the volume fraction of particles in a packed bed (i.e. maximum packing) depends on particle size. One explanation for this is based on the idea that particle adhesion is the primary factor. In this paper, however, it is shown that entrainment and immobilization of liquid by the particles can also account for the facts.

  12. A selection-quotient process for packed word Hopf algebra

    CERN Document Server

    Duchamp, G H E; Tanasa, A

    2013-01-01

    In this paper, we define a Hopf algebra structure on the vector space spanned by packed words using a selection-quotient coproduct. We show that this algebra is free on its irreducible packed words. Finally, we give some brief explanations on the Maple codes we have used.

  13. The performance of structured packings in trickle-bed reactors.

    NARCIS (Netherlands)

    Frank, M.J.W.; Frank, M.J.W.; Kuipers, J.A.M.; Versteeg, Geert; van Swaaij, Willibrordus Petrus Maria

    1999-01-01

    An experimental study was carried out to investigate whether the use of structured packings might improve the mass transfer characteristics and the catalyst effectiveness of a trickle-bed reactor. Therefore, the performances of a structured packing, consisting of KATAPAK elements, and a dumped

  14. The performance of structured packings in trickle-bed reactors.

    NARCIS (Netherlands)

    Frank, M.J.W.; Kuipers, J.A.M.; Versteeg, G.F.; Swaaij, van W.P.M.

    1999-01-01

    An experimental study was carried out to investigate whether the use of structured packings might improve the mass transfer characteristics and the catalyst effectiveness of a trickle-bed reactor. Therefore, the performances of a structured packing, consisting of KATAPAK elements, and a dumped packi

  15. The Performance of Structured Packings in Trickle-Bed Reactors

    NARCIS (Netherlands)

    Frank, M.J.W.; Kuipers, J.A.M.; Versteeg, G.F.; Swaaij, W.P.M. van

    1999-01-01

    An experimental study was carried out to investigate whether the use of structured packings might improve the mass transfer characteristics and the catalyst effectiveness of a trickle-bed reactor. Therefore, the performances of a structured packing, consisting of KATAPAK elements, and a dumped packi

  16. Hydrodynamics of multi-phase packed bed micro-reactors

    NARCIS (Netherlands)

    Márquez Luzardo, N.M.

    2010-01-01

    Why to use packed bed micro-reactors for catalyst testing? Miniaturized packed bed reactors have a large surface-to-volume ratio at the reactor and particle level that favors the heat- and mass-transfer processes at all scales (intra-particle, inter-phase and inter-particle or reactor level). If the

  17. Formation and liquid permeability of dense colloidal cube packings

    NARCIS (Netherlands)

    Castillo, Sonja I R; Thies-Weesie, Dominique M E; Philipse, Albert P.

    2015-01-01

    The liquid permeability of dense random packings of cubic colloids with rounded corners is studied for solid hematite cubes and hollow microporous silica cubes. The permeabilities of these two types of packings are similar, confirming that the micropores in the silica shell of the hollow cubes do

  18. Does the fluid elasticity influence the dispersion in packed beds?

    NARCIS (Netherlands)

    Westerterp, K. Roel; Wijngaarden, Ruud J.; Nijhuis, Niek B.G.

    1996-01-01

    Reasons are given why the axial dispersion in a gas flowing through a packed bed may be influenced by the elasticity - or compressibility - of the fluid. To support this hypothesis, experiments have been done in a packed column at pressures from 0.13 to 2.0 MPa. The elasticity E of a gas is proporti

  19. Protein Crystallization

    Science.gov (United States)

    Chernov, Alexander A.

    2005-01-01

    Nucleation, growth and perfection of protein crystals will be overviewed along with crystal mechanical properties. The knowledge is based on experiments using optical and force crystals behave similar to inorganic crystals, though with a difference in orders of magnitude in growing parameters. For example, the low incorporation rate of large biomolecules requires up to 100 times larger supersaturation to grow protein, rather than inorganic crystals. Nucleation is often poorly reproducible, partly because of turbulence accompanying the mixing of precipitant with protein solution. Light scattering reveals fluctuations of molecular cluster size, its growth, surface energies and increased clustering as protein ages. Growth most often occurs layer-by-layer resulting in faceted crystals. New molecular layer on crystal face is terminated by a step where molecular incorporation occurs. Quantitative data on the incorporation rate will be discussed. Rounded crystals with molecularly disordered interfaces will be explained. Defects in crystals compromise the x-ray diffraction resolution crucially needed to find the 3D atomic structure of biomolecules. The defects are immobile so that birth defects stay forever. All lattice defects known for inorganics are revealed in protein crystals. Contribution of molecular conformations to lattice disorder is important, but not studied. This contribution may be enhanced by stress field from other defects. Homologous impurities (e.g., dimers, acetylated molecules) are trapped more willingly by a growing crystal than foreign protein impurities. The trapped impurities induce internal stress eliminated in crystals exceeding a critical size (part of mni for ferritin, lysozyme). Lesser impurities are trapped from stagnant, as compared to the flowing, solution. Freezing may induce much more defects unless quickly amorphysizing intracrystalline water.

  20. Thermodynamic properties of the magnetized Coulomb crystal lattices

    Science.gov (United States)

    Kozhberov, A. A.

    2016-08-01

    It is thought that Coulomb crystals of ions with hexagonal close-packed lattice may form in the crust of strongly-magnetized neutron stars (magnetars). In this work we are trying to verify this prediction assuming that the direction of the magnetic field corresponds to the minimum of the zero-point energy. We also continue a detailed study of vibration modes and thermodynamic properties of magnetized Coulomb crystals in a wide range of temperatures and magnetic fields. It is demonstrated that the total Helmholtz free energy of the body-centered cubic Coulomb crystal is always lower than that of the Coulomb crystal with hexagonal close-packed or face-centered cubic lattice, which casts doubt on the hypothesis above.