WorldWideScience

Sample records for crystal fiber pcf

  1. Liquid crystal modified photonic crystal fiber (LC-PCF) fabricated with an un-cured SU-8 photoresist sealing technique for electrical flux measurement.

    Science.gov (United States)

    Kuo, Shu-Ming; Huang, Yu-Wen; Yeh, Szu-Ming; Cheng, Wood-Hi; Lin, Che-Hsin

    2011-09-12

    The optical transmission properties of photonic crystal fibers (PCFs) can be manipulated by modifying the pattern arrangement of the air channels within them. This paper presents a novel MEMS-based technique for modifying the optical transmission properties of commercial photonic-crystal fiber (PCF) by selectively filling the voids within the fiber structure with liquid crystals. In the proposed approach, an un-cured SU-8 ring pattern with a thickness of 5 μm is fabricated using a novel stamping method. The PCF is then brought into contact with the SU-8 pattern and an infra-red (IR) laser beam is passed through the fiber in order to soften the SU-8 surface; thereby selectively sealing some of the air channels with molten SU-8. Liquid crystals (LCs) are then infiltrated into the un-sealed holes in the PCF via capillary effects in order to modify the transmission properties of the PCF. Two selectively-filled PCFs are fabricated, namely an inner-ring LC-PCF and a single-line LC-PCF, respectively. It is shown that the two LC-PCFs exhibit significantly different optical behaviors. The practical applicability of the proposed selective-filling approach is demonstrated by fabricating an electric field sensor. The experimental results show that the sensor has the ability to measure electric fields with an intensity of up to 40 kV/cm.

  2. 35 W high power all fiber supercontinuum generation in PCF with picosecond MOPA laser

    Science.gov (United States)

    Chen, Hongwei; Chen, Shengping; Wang, Jianhua; Chen, Zilun; Hou, Jing

    2011-11-01

    We demonstrate 35 W high power all fiber supercontinuum generation by pumping photonic crystal fiber (PCF) with a 57.7 W picosecond fiber MOPA. The picosecond fiber MOPA pumped supercontinuum source exhibits an optical-to-optical conversion efficiency of up to 61.7%, covering a spectral range from 600 nm to beyond 1700 nm. The compact and practical configuration of this supercontinuum source has potential to achieve higher power scale together with perfect continuum spectrum.

  3. Photonic Crystal Fiber Attenuator

    Institute of Scientific and Technical Information of China (English)

    Joo; Beom; Eom; Hokyung; Kim; Jinchae; Kim; Un-Chul; Paek; Byeong; Ha; Lee

    2003-01-01

    We propose a novel fiber attenuator based on photonic crystal fibers. The difference in the modal field diameters of a conventional single mode fiber and a photonic crystal fiber was used. A variable optical attenuator was also achieved by applying macro-bending on the PCF part of the proposed attenuator

  4. A Gas Cell Based on Hollow-Core Photonic Crystal Fiber (PCF and Its Application for the Detection of Greenhouse Gas (GHG: Nitrous Oxide (N2O

    Directory of Open Access Journals (Sweden)

    Jonas K. Valiunas

    2016-01-01

    Full Text Available The authors report the detection of nitrous oxide gas using intracavity fiber laser absorption spectroscopy. A gas cell based on a hollow-core photonic crystal fiber was constructed and used inside a fiber ring laser cavity as an intracavity gas cell. The fiber laser in the 1.55 μm band was developed using a polarization-maintaining erbium-doped fiber as the gain medium. The wavelength of the laser was selected by a fiber Bragg grating (FBG, and it matches one of the absorption lines of the gas under investigation. The laser wavelength contained multilongitudinal modes, which increases the sensitivity of the detection system. N2O gas has overtones of the fundamental absorption bands and rovibrational transitions in the 1.55 μm band. The system was operated at room temperature and was capable of detecting nitrous oxide gas at sub-ppmv concentration level.

  5. Photonic crystal fibers, devices, and applications

    Institute of Scientific and Technical Information of China (English)

    Wei JIN; Jian JU; Hoi Lut HO; Yeuk Lai HOO; Ailing ZHANG

    2013-01-01

    This paper reviews different types of air-silica photonic crystal fibers (PCFs), discusses their novel properties, and reports recent advances in PCF components and sensors as well as techniques for splicing PCFs to standard telecomm fibers.

  6. Recent Progress of Photonic Crystal Fibers

    Institute of Scientific and Technical Information of China (English)

    Katsusuke; Tajima

    2003-01-01

    Photonic crystal fibers are attractive since we can realize a wide variety of unique features in the PCFs, which cannot be realized in conventional single-mode fibers. We describe recent progress in the PCF.

  7. Radiation trapping inside a hollow-core photonic crystal fiber

    CERN Document Server

    Jen, H H; Lee, Kevin C J; Chen, Yi-Hsin; Yu, Ite A

    2014-01-01

    We report the radiation trapping effect inside a hollow-core photonic crystal fiber (PCF). An optical dipole trap was used to load and confine the atoms in the PCF without contacting the wall of the fiber. The transmission of a probe light propagating through the PCF was studied experimentally and theoretically. With the experimental results and theoretical predictions, we conclude that the radiation trapping can play a significant role and should be taken into account in the spectroscopic measurements inside the PCF.

  8. Study of the fusion point between PM-PCF and panda fiber and its influence to Interferometric fiber-optical gyroscope

    Science.gov (United States)

    Sun, Zuoming; Wang, Shuhua; Li, Junwei

    2017-02-01

    Microhole collapse property of polarization maintaining photonic crystal fibers (PM-PCF) and its effect on the splice loss and polarization cross-coupling during fusion splicing were investigated. The relationship between the microhole collapse and polarization cross-coupling are analyzed through simulation and experiment. Finally their influence to the phase error of the FOG is calculated and tested.

  9. Bandwidth comparison of photonic crystal fibers and conventional single mode fibers

    DEFF Research Database (Denmark)

    Nielsen, Martin Dybendal; Folkenberg, Jacob Riis; Mortensen, Niels Asger;

    2004-01-01

    We experimentally compare the optical bandwidth of a conventional single-mode fiber (SMF) with 3 different photonic crystal fibers (PCF) all optimized for visible applications. The spectral attenuation, single-turn bend loss, and mode-field diameters (MFD) are measured and the PCF is found to have...... a significantly larger bandwidth than the SMF for an identical MFD. It is shown how this advantage can be utilized for realizing a larger MFD for the PCF while maintaining a bending resistant fiber....

  10. Large Mode Area Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Nielsen, Martin Dybendal

    2004-01-01

    The photonic crystal fiber (PCF) is a novel single-material optical waveguide realized by an arrangement of air-holes running along the full length of the fiber. Since the proposal of the PCF in 1996, the technology has developed into being a well-established area of research and commercialisation......-mode area fiber optimised for visible light applications. The second is a fiber optimised for the telecommunication band realizing a nonlinear effective area 5 times larger than state of the art conventional fibers. Two examples of alternative designs are demonstrated addressing the core and the cladding...

  11. Chalcogenide glass hollow core photonic crystal fibers

    Science.gov (United States)

    Désévédavy, Frédéric; Renversez, Gilles; Troles, Johann; Houizot, Patrick; Brilland, Laurent; Vasilief, Ion; Coulombier, Quentin; Traynor, Nicholas; Smektala, Frédéric; Adam, Jean-Luc

    2010-09-01

    We report the first hollow core photonic crystal fibers (HC PCF) in chalcogenide glass. To design the required HC PCF profiles for such high index glass, we use both band diagram analysis to define the required photonic bandgap and numerical simulations of finite size HC PCFs to compute the guiding losses. The material losses have also been taken into account to compute the overall losses of the HC PCF profiles. These fibers were fabricated by the stack and draw technique from TeAsSe (TAS) glass. The fibers we drew in this work are composed of six rings of holes and regular microstructures. Two profiles are presented, one is known as a kagome lattice and the other one corresponds to a triangular lattice. Geometrical parameters are compared to the expected parameters obtained by computation. Applications of such fibers include power delivery or fiber sensors among others.

  12. Rigorous modeling of cladding modes in photonic crystal fibers

    DEFF Research Database (Denmark)

    Rindorf, Lars Henning; Bang, Ole

    We study the cladding modes of a photonic crystal fiber (PCF) with a finite size cladding using a finite element method. The cladding consists of seven rings of air holes with bulk silica outside.......We study the cladding modes of a photonic crystal fiber (PCF) with a finite size cladding using a finite element method. The cladding consists of seven rings of air holes with bulk silica outside....

  13. Gain-switched CW fiber laser for improved supercontinuum generation in a PCF

    DEFF Research Database (Denmark)

    Larsen, Casper; Noordegraaf, Danny; Skovgaard, P.M.W.

    2011-01-01

    We demonstrate supercontinuum generation in a PCF pumped by a gain-switched high-power continuous wave (CW) fiber laser. The pulses generated by gain-switching have a peak power of more than 700 W, a duration around 200 ns, and a repetition rate of 200 kHz giving a high average power of almost 30 W......W/nm). This is considerably broader than when operating the same system under CW conditions. The presented approach is attractive due to the high power, power scalability, and reduced system complexity compared to picosecond-pumped supercontinuum sources. © 2011 Optical Society of America....

  14. Controlled chemical modification of the internal surface of photonic crystal fibers for application as biosensitive elements

    Science.gov (United States)

    Pidenko, Sergey A.; Burmistrova, Natalia A.; Pidenko, Pavel S.; Shuvalov, Andrey A.; Chibrova, Anastasiya A.; Skibina, Yulia S.; Goryacheva, Irina Y.

    2016-10-01

    Photonic crystal fibers (PCF) are one of the most promising materials for creation of constructive elements for bio-, drug and contaminant sensing based on unique optical properties of the PCF as effective nanosized optical signal collectors. In order to provide efficient and controllable binding of biomolecules, the internal surface of glass hollow core photonic crystal fibers (HC-PCF) has been chemically modified with silanol groups and functionalized with (3-aminopropyl) triethoxysilane (APTES). The shift of local maxima in the HC-PCF transmission spectrum has been selected as a signal for estimating the amount of silanol groups on the HC-PCF inner surface. The relationship between amount of silanol groups on the HC-PCF inner surface and efficiency of following APTES functionalization has been evaluated. Covalent binding of horseradish peroxidase (chosen as a model protein) on functionalized PCF inner surface has been performed successively, thus verifying the possibility of creating a biosensitive element.

  15. Temperature dependence of the PER in PM-PCF coil

    Institute of Scientific and Technical Information of China (English)

    Hong Zhao; Meng Chen; Gang Li

    2012-01-01

    A piece of domestic polarization-maintaining photonic crystal fiber (PM-PCF,964 m in length) is made into a fiber coil,and its polarization extinction ratio (PER) is measured in a temperature range of -45-80 ℃ before and after PM-PCF is wound and solidified.A fiber coil made of commercial panda PM fiber (PMF) is also fabricated and measured for comparison.Our experiments show that the PER variation of the PM-PCF coil (2.25 dB) is far smaller than that of the panda PMF coil (10 dB) in the whole temperature range because PM-PCF is intrinsically insensitive to the temperature variation and stress in the fiber coil induced by the winding and solidification process.This characteristic is important for the real application of PM-PCFs in temperature-insensitive fiber interferometers,fiber sensors,and optical fiber gyroscopes.

  16. Supercontinuum noise in tapered photonic crystal fibers

    DEFF Research Database (Denmark)

    Møller, Uffe; Sørensen, Simon Toft; Moselund, Peter Morten;

    Supercontinuum generation (SCG) in highly nonlinear photonic crystal fibers (PCF) has drawn a lot of attention for the last decade. Pumping such PCFs with high-power picosecond laser pulses enables the creation of broadband and intense light. Picosecond SCG is initiated by modulation instability...

  17. Refractometry based on a photonic crystal fiber interferometer.

    Science.gov (United States)

    Jha, Rajan; Villatoro, Joel; Badenes, Gonçal; Pruneri, Valerio

    2009-03-01

    We report a simple and compact modal interferometer for applications in refractometry. The device consists of a stub of large-mode-area photonic crystal fiber (PCF) spliced between standard single-mode fibers. In the splice regions the voids of the PCF are fully collapsed, thus allowing the coupling and recombination of PCF core and cladding modes. The device is highly stable over time, has low temperature sensitivity, and is suitable for measuring indices in the 1.330-1.440 range. The measure of the refractive index is carried out by monitoring the shift of the interference pattern.

  18. High-Visibility Photonic Crystal Fiber Interferometer as Multifunctional Sensor

    Directory of Open Access Journals (Sweden)

    Joel Villatoro

    2013-02-01

    Full Text Available A photonic crystal fiber (PCF interferometer that exhibits record fringe contrast (~40 dB is demonstrated along with its sensing applications. The device operates in reflection mode and consists of a centimeter-long segment of properly selected PCF fusion spliced to single mode optical fibers. Two identical collapsed zones in the PCF combined with its modal properties allow high-visibility interference patterns. The interferometer is suitable for refractometric and liquid level sensing. The measuring refractive index range goes from 1.33 to 1.43 and the maximum resolution is ~1.6 × 10−5.

  19. Hundred-Watt-Level, All-Fiber-Integrated Supercontinuum Generation from Photonic Crystal Fiber

    Science.gov (United States)

    Chen, Hongwei; Chen, Zilun; Chen, Shengping; Hou, Jing; Lu, Qisheng

    2013-03-01

    A photonic crystal fiber (PCF) based supercontinuum source with hundred-watt-level average power output is presented in this paper. The output delivery fiber of a 120 W picosecond master-oscillator power-amplifier (MOPA) laser with a 15 µm fiber core is directly spliced with a 2.6-m-long PCF to form the all-fiber-integrated SC source. Using the controlled air-hole collapse technique to expand the core diameter of the PCF, a super-low splice loss (˜0.2 dB) between the delivery fiber and the PCF has been demonstrated. A 92.5 W SC spanning from about 700 nm to beyond 1700 nm is obtained.

  20. Research on interferometric photonic crystal fiber hydrophone

    Science.gov (United States)

    Luo, Hong; Zhang, Zhen-hui; Wang, Fu-yin; Xiong, Shui-dong

    2013-08-01

    Current research on photonic crystal fiber (PCF) for acoustic sensing was focused on the PCF's pressure sensitivity enhancement. However, whether the enhancement of the PCF's pressure sensitivity can be actually realized is still controversial. Practical hydrophone, utilizing PCFs, to manifest its superior sensitivity to normal single mode fibers (SMFs) for acoustic sensing, should be made. Account to this point of view, actual hydrophone was fabricated. Index guiding PCF was used, the fiber core is solid silicon dioxide (SiO2), and the cladding is SiO2 filled with lots of periodical transverse circular air hollows. The PCF, mounted on an air-backed mandrel for structural sensitivity enhancement, was used as a sensing arm of the fiber Michelson interferometer. The other arm, so called reference arm, was made of SMF. Faraday rotator mirrors (FRM) were spliced in the end of each interferometric arm account for polarization induced phase fading, which is a common scheme in fiber interferometric sensing systems. A similar hydrophone, with all the same structure except that the PCF was exchanged into SMF, was also fabrication to make the contrast. The narrowlinewidth and frequency-tunable optical fiber laser was used to achieve high accuracy optical interferometric measurement. Meanwhile, the phase generated carrier (PGC) modulation-demodulation scheme was adopted to interrogate the measurand signal. Experiment was done by using acoustic standing-wave test apparatus. Linearity characteristics of the two hydrophones were measured at frequency 100Hz, 500Hz, and 1000Hz, experimental results showed that the maximum error of the linearity was 10%, a little larger than the theoretical results. Pressure sensitivities of the PCF hydrophone and the SMF hydrophone were measured using a reference standard PZT hydrophone in the frequency range from 20 Hz to 1600 Hz, the measurement data showed that the sensitivity of the PCF hydrophone was about -162.8 dB re. rad/μPa, with a

  1. Photonic crystal fiber with novel dispersion properties

    Institute of Scientific and Technical Information of China (English)

    Shuqin LOU; Shujie LOU; Tieying GUO; Liwen WANG; Weiguo CHEN; Honglei LI; Shuisheng JIAN

    2009-01-01

    Our recent research on designing microstruc-tured fiber with novel dispersion properties is reported in this paper. Two kinds ofphotonic crystal fibers (PCFs) are introduced first. One is the highly nonlinear PCF with broadband nearly zero flatten dispersion. With introducing the germanium-doped (Ge-doped) core into highly non-linear PCF and optimizing the diameters of the first two inner rings of air holes, a new structure of highly non-linear PCF was designed with the nonlinear coefficient up to 47 W-1·km-1 at the wavelength 1.55 μm and nearly zero flattened dispersion of ±0.5 ps/(km·nm) in telecom-munication window (1460-1625nm). Another is the highly negative PCF with a ring of fluorin-doped (F-doped) rods to form its outer ring core while pure silica rods to form its inner core. The peak dispersion - 1064 ps/(km·nm) in 8 nm full width at half maximum (FWHM) wavelength range and -365ps/(km·nm) in 20nm (FWHM) wavelength range can be reached by adjusting the structure parameters. Then, our recent research on the fabrication of PCFs is reported. Effects of draw parameters such as drawing temperature, feed speed, and furnace temperature on the geometry of the final photonic crystal fiber are investigated.

  2. Supercontinuum generation for coherent anti- Stokes Raman scattering microscopy with photonic crystal fibers

    DEFF Research Database (Denmark)

    Pedersen, Pernille Klarskov; Isomäki, Antti; Hansen, Kim P.

    2011-01-01

    Photonic crystal fiber (PCF) designs with two zero-dispersion wavelengths (ZDWs) are experimentally investigated in order to suggest a novel PCF for coherent anti-Stokes Raman scattering (CARS) microscopy. From our investigation, we select the optimum PCF design and demonstrate a tailored spectrum...... analysis, the nonlinear effects responsible for the spectral broadening are explained to be soliton fission processes, dispersive waves, and stimulated Raman scattering....

  3. Analyses of cladding modes in photonic crystal fiber.

    Science.gov (United States)

    Park, Hyun Chul; Hwang, In Kag; Yeom, Dong Il; Kim, Byoung Yoon

    2007-11-12

    Characteristics of cladding modes in a photonic crystal fiber (PCF) are numerically analyzed using the plane wave expansion method. The presence of the outer silica ring in the PCF tends to push the optical fields of the cladding modes toward the rim of the PCF, which creates 'ring modes' whose fields are tightly confined in the outer ring. The dispersion of the cladding modes are determined mainly by the dispersive property of the holey cladding structure. The optical field patterns of the cladding modes and the beatlengths between the fundamental mode and the cladding modes are also investigated.

  4. Analysis of bias thermal stability of interferometer fiber-optic gyroscope using a solid-core polarization-maintaining photonic crystal fiber

    Science.gov (United States)

    Zuoming, Sun; Shuhua, Wang; Junwei, Li; Yazhou, Zhang; Dapeng, Chen

    2016-12-01

    Bias thermal stability of a fiber-optic gyroscope using polarization-maintaining photonic crystal (PM-PCF) was studied. The thermal sensitivity of birefringence in PM-PCF and polarization cross talking in fiber coil was measured. Using an OCDP method, the polarization cross talking causing phase error of the fiber-optic gyroscope (FOG) was analyzed. The contrast experiment result of the FOGs with the PM-PCF coil and PMF coil showed that using PM-PCF instead of PMF can improve the FOG's bias thermal stability by about 50 %.

  5. Low Loss Single-Mode Porous-Core Kagome Photonic Crystal Fiber for THz Wave Guidance

    DEFF Research Database (Denmark)

    Hasanuzzaman, G. K. M.; Habib, Selim; Abdur Razzak, S. M.;

    2015-01-01

    A novel porous-core kagome lattice photonic crystal fiber (PCF) is designed and analyzed in this paper for terahertz (THz) wave guidance. Using finite element method (FEM), properties of the proposed kagome lattice PCF are simulated in details including the effective material loss (EML...

  6. Influence of acoustic waves on supercontinuum generation in photonic crystal fibers.

    Science.gov (United States)

    Acuna Herrera, Rodrigo

    2012-05-01

    In this work, the influence of applying acoustic frequencies to photonic crystal fibers (PCF) on the supercontinuum (SC) generation is presented. We will show numerically the strong influence of coupling modes in PCF in the latest stage of SC and simulations of different scenarios of phase math condition between the modes.

  7. Perturbative modeling of Bragg-grating-based biosensors in photonic-crystal fibers

    DEFF Research Database (Denmark)

    Burani, Nicola; Lægsgaard, Jesper

    2005-01-01

    We present a modeling study carried out to support the design of a novel, to our knowledge, kind of photonic-crystal fiber (PCF)-based sensor. This device, based on a PCF Bragg grating, detects the presence of selected single-stranded DNA molecules, hybridized to a biofilm in the air holes of the...

  8. Broadband multiplex coherent anti-Stokes Raman scattering microscopy employing photonic-crystal fibers

    DEFF Research Database (Denmark)

    Andresen, Esben Ravn; Paulsen, Henrik Nørgaard; Birkedal, Victoria;

    2006-01-01

    We demonstrate spectral multiplex coherent anti-Stokes Raman scattering (CARS) spectroscopy and microscopy based on a single Ti:sapphire oscillator and a nonlinear photonic-crystal fiber (PCF). The Stokes pulse is generated by spectral conversion of the laser pulse in a PCF. The pump pulse...

  9. Stable CW Single-Mode Photonic Crystal Fiber DFB Ring Laser

    Institute of Scientific and Technical Information of China (English)

    Kevin Cook; John Canning; John Holdsworth; Chris Dewhurst

    2008-01-01

    We demonstrate stable single-mode CW operation of a DFB ring laser based on Er3+ doped photonics crystal fiber (PCF). The incorporation of a ring cavity allows one single mode to lase and also suppresses the unwanted effect of self-pulsing. Such a narrow linewidth source in PCF has great potential in spectroscopy.

  10. Spatial and spectral imaging of LMA photonic crystal fiber amplifiers

    DEFF Research Database (Denmark)

    Laurila, Marko; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2011-01-01

    We demonstrate modal characterization using spatial and spectral resolved (S2) imaging, on an Ytterbium-doped large-mode-area photonic crystal fiber (PCF) amplifier and compare results with conventional cut-off methods. We apply numerical simulations and step-index fiber experiments to calibrate...

  11. Mode-coupling in photonic crystal fibers with multiple cores

    DEFF Research Database (Denmark)

    Kristensen, Martin

    2000-01-01

    Summary form only given. We have fabricated a photonic crystal fiber (PCF) with multiple cores by drawing a fiber preform from stacked glass tubes. Transmission is high through each core despite many unintentional defects in the cladding indicating that the guidance is determined by the holes near...

  12. Study on Dispersion Properties of Photonic Crystal Fiber by Effective-Index Model

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The group-velocity-dispersion properties of photonic crystal fiber (PCF) were investigated by effective-index model. The relationship between waveguide dispersion and structure parameters: the pitch A and the relative hole size/was studied.

  13. Study on Dispersion Properties of Photonic Crystal Fiber by Effective-Index Model

    Institute of Scientific and Technical Information of China (English)

    Ren Guobin; Wang Zhi; Lou Shuqin; Jian Shuisheng

    2003-01-01

    The group-velocity-dispersion properties of photonic crystal fiber (PCF) were investigated by effective-index model. The relationship between waveguide dispersion and structure parameters: the pitch and the relative hole size f was studied.

  14. Numerical analysis of Raman amplification and optical signal-to-noise ratio in a photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    Tao Shang; Jianping Chen; Xinwan Li; Junhe Zhou

    2006-01-01

    @@ A numerical design on the triangular photonic crystal fiber (PCF) based backward multi-pump Raman amplifier is presented. It is demonstrated that high flat Raman gain can be reached based on PCF.Influences of different geometric parameters and germanium doping concentrations on the Raman net gain, amplified spontaneous emission (ASE) noise and double Rayleigh backscattering (DRBS) of the signal have been analyzed. For optimizing crystal fiber Raman amplifier (FRA), there is tradeoff between the geometric parameter and germanium doping concentration of triangular PCF. The results show that PCF is an appropriate candidate for high gain Raman amplifiers.

  15. Phase sensitivity to temperature of the guiding mode in polarization-maintaining photonic crystal fiber.

    Science.gov (United States)

    Song, Jingming; Sun, Kang; Li, Shuai; Cai, Wei

    2015-08-20

    The propagating phase changing of a polarization-maintaining photonic crystal fiber (PM-PCF) caused by temperature variation is theoretically studied, as well as compared with conventional PANDA fiber. As to verifying numerical analysis, a platform based on a Michelson interferometer for phase versus temperature measurement was built for both kinds of fiber. Experiments show that PM-PCF has similar temperature sensitivity with conventional polarization-maintaining fiber. With optimized PM-PCF design (thinner coating layer and coating material with smaller thermal expansion coefficient), the sensitivity could be further reduced to about 80% of the present level.

  16. Liquid Crystal photonic Bandgap Fiber Devices

    DEFF Research Database (Denmark)

    Wei, Lei

    In this Ph.D. thesis, an experimental investigation of liquid crystal photonic bandgap (LCPBG) fiber devices and applications is presented. Photonic crystal fibers (PCFs) consist of a cladding microstructure with periodic index variations and a core defined by a defect of the structure....... The presence of liquid crystals (LCs) in the air-holes of the PCF transforms the fiber from a total internal reflection (TIR) guiding type into a photonic bandgap (PBG) guiding type. The light is confined to the silica core by coherent scattering from the LC-filled air-holes and the transmission spectrum...... of each LCPBG fiber. Finally, the applications for LCPBG fiber devices based on the on-chip platform design have been demonstrated in realizing microwave true-time delay and creating an electrically tunable fiber laser. Referatet mailes...

  17. Liquid Crystal photonic Bandgap Fiber Devices

    DEFF Research Database (Denmark)

    Wei, Lei

    In this Ph.D. thesis, an experimental investigation of liquid crystal photonic bandgap (LCPBG) fiber devices and applications is presented. Photonic crystal fibers (PCFs) consist of a cladding microstructure with periodic index variations and a core defined by a defect of the structure....... The presence of liquid crystals (LCs) in the air-holes of the PCF transforms the fiber from a total internal reflection (TIR) guiding type into a photonic bandgap (PBG) guiding type. The light is confined to the silica core by coherent scattering from the LC-filled air-holes and the transmission spectrum...... of each LCPBG fiber. Finally, the applications for LCPBG fiber devices based on the on-chip platform design have been demonstrated in realizing microwave true-time delay and creating an electrically tunable fiber laser. Referatet mailes...

  18. Photonic Crystal Fiber Interferometer for Dew Detection

    OpenAIRE

    Mathew, Jinesh; Semenova, Yuliya; Farrell, Gerald

    2012-01-01

    A novel method for dew detection based on photonic crystal fiber (PCF) interferometer that operates in reflection mode is presented in this paper. The fabrication of the sensor head is simple since it only involves cleaving and fusion splicing. The sensor shows good sensitivity to dew formation with a large wavelength peak shift of the interference pattern at the onset of dew formation. The device’s response to ambient humidity and temperature are also studied and reported in this paper. From...

  19. Ultra low bending loss equiangular spiral photonic crystal fibers in the terahertz regime

    Directory of Open Access Journals (Sweden)

    Arti Agrawal

    2012-06-01

    Full Text Available An Equiangular Spiral Photonic Crystal Fiber (ES-PCF design in Topas® for use in the Terahertz regime is presented. The design shows ultra low bending loss and very low confinement loss compared to conventional Hexagonal PCF (H-PCF. The ES-PCF has excellent modal confinement properties, together with several parameters to allow the optimization of the performance over a range of important characteristics. A full vector Finite Element simulation has been used to characterize the design which can be fabricated by a range of techniques including extrusion and drilling.

  20. Demonstration of Broadcast Transmission, and Wavelength Conversion Functionalities Using Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Zsigri, Beata; Peucheret, Christophe; Nielsen, Martin Dybendal;

    2006-01-01

    Broadcasting functionality using cross-phase modulation in a nonlinear optical loop mirror utilizing 100-m highly nonlinear (HNL) photonic crystal fiber (PCF) as nonlinear element is demonstrated. This work presents entirely PCF-based network functionalities including broadcasting, transmission......, and wavelength conversion. Broadcasting on four channels, transmission of one selected channel through one partially dispersion compensated 10.4-km PCF transmission link and wavelength conversion using four-wave mixing in a 50-m HNL-PCF at the ingress of the target subnetwork have been successfully demonstrated....

  1. ANALYSIS OF INDEXED-GUIDED HIGHLY BIREFRINGENT PHOTONIC CRYSTAL FIBER EMPLOYING DIFFERENT CLADDING GEOMETRIES

    Directory of Open Access Journals (Sweden)

    A. M. Jouri

    2015-07-01

    Full Text Available      In this paper, a comparative study of three geometries of highly birefringent photonic crystal fibers (HB PCF is presented. The proposed geometries are: V type PCF, Pseudo-Panda PCF and selectively liquid-filled PCF. Based on the famous Finite Difference Time Domain (FDTD method with the perfectly matched layer (PML boundary condition, the simulations are carried out in the aim to find a tradeoff between the chromatic dispersion, the birefringence and the confinement loss.

  2. Depolarized guided acoustic wave Brillouin scattering in hollow-core photonic crystal fibers

    CERN Document Server

    Zhong, Wenjia Elser née; Elser, Dominique; Heim, Bettina; Marquardt, Christoph; Leuchs, Gerd

    2015-01-01

    By performing quantum-noise-limited optical heterodyne detection, we observe polarization noise in light after propagation through a hollow-core photonic crystal fiber (PCF). We compare the noise spectrum to the one of a standard fiber and find an increase of noise even though the light is mainly transmitted in air in a hollow-core PCF. Combined with our simulation of the acoustic vibrational modes in the hollow-core PCF, we are offering an explanation for the polarization noise with a variation of guided acoustic wave Brillouin scattering (GAWBS). Here, instead of modulating the strain in the fiber core as in a solid core fiber, the acoustic vibrations in hollow-core PCF influence the effective refractive index by modulating the geometry of the photonic crystal structure. This induces polarization noise in the light guided by the photonic crystal structure.

  3. Holographic polymer-dispersed liquid crystal Bragg grating integrated inside a solid core photonic crystal fiber

    CERN Document Server

    Zito, Gianluigi

    2013-01-01

    A polymer/liquid crystal-based fiber Bragg grating (PLC-FBG) is fabricated with visible two-beam holography by photo-induced modulation of a pre-polymer/LC solution infiltrated into the hollow channels of a solid core photonic crystal fiber (PCF). The fabrication process and effects related to the photonic bandgap guidance into the infiltrated PCF, and characterization of the PLC-FBG are discussed. Experimental data here presented, demonstrate that the liquid crystal inclusions of the PLC-FBG lead to high thermal and bending sensitivities. The microscopic behavior of the polymer/liquid crystal phase separation inside the PCF capillaries is examined using scanning electron microscopy, while further discussed.

  4. Theoretical analysis of a biased photonic crystal fiber infiltrated with a negative dielectric anisotropy liquid crystal

    DEFF Research Database (Denmark)

    Weirich, Johannes; Wei, Lei; Lægsgaard, Jesper;

    2009-01-01

    We simulate the PBG mode of a biased Photonic Crystal Fiber (PCF) infiltrated with a Liquid Crystal (LC) with negative dielectric anisotropy. We analyse the voltage induced change of the transmission spectrum, dispersion and losses and compare them to the experimental values....

  5. Photonic crystal fiber as lab-in-fiber optofluidic platform for sensing and process monitoring

    Science.gov (United States)

    Tian, Fei

    The ability to design and fabricate photonic crystal fiber (PCF) of vastly different microstructural and optical characteristics is arguably one of the most significant recent advances in the field of fiber optics. This dissertation aims to advance the PCF research frontier by exploring long-period fiber gratings (LPG) inscribed in PCF for sensing and process monitoring via combined numerical and experimental investigation. Specifically, a mode solver based on the Finite Element Method (FEM) has been employed to calculate the mode field distribution, the phase matching condition, and the dispersive characteristics associated with LPG-induced coupling of the fundamental core mode (LP01) to various cladding modes (LPmn, m=0,1; n=2,3, ...) in an endlessly single mode PCF. The numerical results have been used to guide the design and fabrication of LPG in PCF by CO2 laser inscription to maximize index sensitivity in gas or liquid medium. Cascaded PCF-LPG has been fabricated and shown to exhibit record sensitivity in excess of 1700 nm/RIU with high resolution for index measurements of gas phase. The inherent interference fringes in the transmission spectrum of cascaded PCF-LPG have been utilized to analyze mode coupling behaviour. In addition, we have developed and implemented a reflective mirror-aided method to allow symmetrical CO2 laser irradiation of PCF during LPG inscription. Both numerical analysis and experimental measurements have shown significantly improved mode coupling behaviour, mode field distribution, as well as reproducibility in LPG fabrication, critical for practical exploitation of the PCF-LPG platform. We have further exploited the high index sensitivity of PCF-LPG to monitor layer-by-layer (LbL) self-assembly of poly(vinyl pyrrolidone) (PVPON) and poly(methacrylic acid) (PMAA) polyelectrolyte layers as well as the pH responsiveness of the cross-linked PMAA hydrogel films. A shift of ˜1.625 nm in the resonance wavelength per polyelectrolyte layer

  6. Liquid Crystals and Photonic Bandgap Fiber Components

    DEFF Research Database (Denmark)

    Weirich, Johannes; Wei, Lei; Scolari, Lara

    Liquid Crystal(LC)filled Photonic Crystal Fibers(PCFs) represent a promising platform for the design and the fabrication of tunable all-in fiber devices. Tunability is achieved by varying the refractive index of the LC thermally, optically or electrically. In this contribution we present important...... parts of the LC theory as well as an application of a LC infiltrated PCF subject to an external electrostatic field. The fiber is placed between two electrodes and the voltage is increased step by step leading to the reorientation of the LC in the fiber capillaries. This mechanism can be used to produce...... a swichable polarizer, and an on chip LC photonic bandgap fiber polarimeter is presented, which admits strong attenuation of one polarization direction while the other one is nearly unaffected....

  7. Supercontinuum Generation in Uniform and Tapered Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Sørensen, Simon Toft; Møller, Uffe Visbech; Larsen, Casper;

    Supercontinuum generation (SCG) is a striking phenomenon of extreme spectral broadening involving a wealth of beautiful nonlinear physics. The study of SCG and development of today’s commercial sources really took off with the invention of the photonic crystal fiber (PCF), in which light can...

  8. Hybrid polymer photonic crystal fiber with integrated chalcogenide glass nanofilms

    DEFF Research Database (Denmark)

    Markos, Christos; Kubat, Irnis; Bang, Ole

    2014-01-01

    The combination of chalcogenide glasses with polymer photonic crystal fibers (PCFs) is a difficult and challenging task due to their different thermo-mechanical material properties. Here we report the first experimental realization of a hybrid polymer-chalcogenide PCF with integrated As2S3 glass ...

  9. Coupling Characteristics of Fused Optical Fiber Coupler Formed with Single-Mode Fiber and Photonic Crystal Fiber Having Air Hole Collapsed Taper

    Directory of Open Access Journals (Sweden)

    Hirohisa Yokota

    2016-01-01

    Full Text Available Fused coupler forming with a single-mode fiber (SMF and a photonic crystal fiber (PCF is one of the solutions for optical coupling from a light source to a PCF. In this paper, we presented coupling characteristics of a fused fiber coupler formed with an ordinary SMF and a PCF having air hole collapsed taper. A prototype of SMF-PCF coupler with air hole collapsed taper was fabricated using CO2 laser irradiation. The coupling efficiency from SMF to PCF was −6.2 dB at 1554 nm wavelength in the fabricated coupler. The structure of the SMF-PCF coupler to obtain high coupling efficiency was theoretically clarified by beam propagation analysis using an equivalent model of the coupler with simplification. It was clarified that appropriately choosing the prestretched or etched SMF diameter and the length of air hole collapsed region was effective to obtain high coupling efficiency that was a result of high extinction ratio at cross port and low excess loss. We also demonstrated that the diameter of prestretched SMF to obtain high coupling efficiency was insensitive to the air hole diameter ratio to pitch of the PCF in the air hole collapsed SMF-PCF coupler.

  10. PbS Quantum Dots Filled Photonic Crystal Fiber for All-fiber Amplifier

    Science.gov (United States)

    Wang, Zhanbing; Shang, Yana; Pang, Fufei; Liu, Huanhuan; Chen, Na; Wu, Yan; Kang, Yanan

    2017-06-01

    In this paper, we have proposed a novel type of fiber amplifier by filling the PbS semiconductor quantum dots into the holes of photonic crystal fibers (PCFs) for the first time. Based on simulation results, we have found that the loss of PCF filled with PbS is slightly increased compared with the one without PbS at wavelength of 1310 nm. Furthermore, we have successfully fabricated the PbS-filled PCF with selective air-hole cladding by a new perfusion technique that can optimize the overall loss.

  11. 20 W all fiber supercontinuum generation from picosecond MOPA pumped photonic crystal fiber

    Science.gov (United States)

    Chen, S.-P.; Wang, J.-H.; Chen, H.-W.; Chen, Z.-L.; Hou, J.; Xu, X.-J.; Chen, J.-B.; Liu, Z.-J.

    2011-03-01

    An all fiber high power supercontinuum (SC) source is demonstrated by pumping a section of photonic crystal fiber (PCF) with a picosecond MOPA laser. The core of the PCF is enlarged at the input end through a serious of PCF post processing method to match the output fiber of the picosecond laser, to ensure low loss splicing, hence high power operation of the whole system. The supercontinuum output spectrum covers the wavelength range from 650 nm to beyond 1700 nm. Limited by available pump power, 20 W super-continuum output power is obtained under 29.5 W picosecond pump power, giving a high optical to optical conversion efficiency of 67.8%.

  12. Investigation on bismuth-oxide photonic crystal fiber for optical parametric amplification

    Institute of Scientific and Technical Information of China (English)

    JIN Cang; RAO Lan; YUAN Jin-hui; SHEN Xiang-wei; YU Chong-xiu

    2011-01-01

    A hexagonal solid-core bismuth-oxide micro-structure fiber is developed to balance its dispersion and nonlinearity. This simulation and calculation results show that the bismuth-oxide photonic crystal fiber (Bi-PCF) has near zero dispersion around 1550 nm. Its dispersion slop in the communication wavelength range is also relatively flat. Moreover, both nonlinear coefficient and model field distribution are obtained. Compared with the experimental results by SiO-PCF, it can be seen that the Bi-PCF shows excellent characteristics for the optical parametric amplification (OPA).

  13. Low loss and broadband hollow-core photonic crystal fibers

    Science.gov (United States)

    Wang, Y. Y.; Gerome, F.; Humbert, G.; Blondy, J. M.; Benabid, F.

    2011-03-01

    We report on recent developments on fabrication and optical guidance of Kagome-lattice hollow-core photonic crystal fiber (HC-PCF). These include the design and fabrication of a hypocycloid-shaped core Kagome HC-PCF that combines a record optical attenuation with a baseline exhibiting ~180 dB/km over a transmission bandwidth larger than 200 THz. These results are corroborated with theoretical simulations which show that both the core-shape and the cladding ring number play role in inhibited coupling, inducing core-mode confinement for the fundamental transmission band. We also show that the inhibited coupling is weaker for the first higher-order transmission band by theoretically and experimentally comparing Kagome HC-PCF with a single anti-resonant ring hollow-core fiber.

  14. Supercontinuum generation from dispersion-flattened photonic crystal fiber using picosecond pulses

    Institute of Scientific and Technical Information of China (English)

    Li He; Bojun Yang; Xiaoguang Zhang; Li Yu

    2006-01-01

    We present the all-fiber system for supercontiuum (SC) generation with picosecond pulses. By launching1.6-ps pulses from pulsed erbium-doped fiber laser (EDFL) into a section of photonic crystal fiber (PCF),the spectral broadening is observed. The bandwidth of 237 nm (at 20 dB level) is achieved.

  15. Structure optimization of small-diameter polarization-maintaining photonic crystal fiber for mini coil of spaceborne miniature fiber-optic gyroscope.

    Science.gov (United States)

    Song, Ningfang; Cai, Wei; Song, Jingming; Jin, Jing; Wu, Chunxiao

    2015-11-20

    A small-diameter polarization-maintaining photonic crystal fiber (PM-PCF) for mini coils of spaceborne miniature fiber-optic gyroscopes is proposed in this paper. To ensure the strength of the small-diameter PM-PCF, a four-ring air holes structure is adopted. Using the full vector finite element method, dependence studies of modal field distribution, birefringence, and confinement loss on several key structure parameters are numerically investigated. The optimized parameter region is obtained. An optimized PM-PCF is fabricated, which can achieve similar to or even better optical properties than that of commercial PM-PCFs. The coating and cladding diameters of the optimized PM-PCF are 135 μm and 100 μm, respectively. Meanwhile, the optimized small-diameter PM-PCF shows a proof test level of 0.5%. The attenuation of the PM-PCF at 1550 nm is ∼2  dB/km. Typical volume of a mini coil wound with 300 m optimized PM-PCF is 5.9  cm3, which is decreased by ∼60% compared with a commercial PM-PCF coil of the same length. The bias stability of this coil is comparable with that of a conventional PMF coil of comparable length. Thus, the optimized small-diameter PM-PCF is suitable for mini coils of spaceborne miniature fiber-optic gyroscopes.

  16. Photonic crystal fibers

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper; Hansen, K P; Nielsen, M D;

    2003-01-01

    Photonic crystal fibers having a complex microstructure in the transverse plane constitute a new and promising class of optical fibers. Such fibers can either guide light through total internal reflection or the photonic bandgap effect, In this paper, we review the different types and applications...... of photonic crystal fibers with particular emphasis on recent advances in the field....

  17. Enhanced nonlinearity in photonic crystal fiber by germanium doping in the core region

    Institute of Scientific and Technical Information of China (English)

    Tingting Sun; Guiyun Kai; Zhi Wang; Shuzhong Yuan; Xiaoyi Dong

    2008-01-01

    Germanium doping in silica can be used as a method for nonlinearity enhancement.Properties of the enhanced nonlinearity in photonic crystal fiber(PCF)with a GeO2-doped core are investigated theoretically by using all-vector finite element method.Numerical result shows that the nonlinear coefficient of PCF is greatly enhanced with increasing doping concentration,furthermore,optimal radius of the doped region should be considered for the desired operating wavelength.

  18. Recent advances in liquid-crystal fiber optics and photonics

    Science.gov (United States)

    Woliński, T. R.; Siarkowska, A.; Budaszewski, D.; Chychłowski, M.; Czapla, A.; Ertman, S.; Lesiak, P.; Rutkowska, K. A.; Orzechowski, K.; Sala-Tefelska, M.; Sierakowski, M.; DÄ browski, R.; Bartosewicz, B.; Jankiewicz, B.; Nowinowski-Kruszelnicki, E.; Mergo, P.

    2017-02-01

    Liquid crystals over the last two decades have been successfully used to infiltrate fiber-optic and photonic structures initially including hollow-core fibers and recently micro-structured photonic crystal fibers (PCFs). As a result photonic liquid crystal fibers (PLCFs) have been created as a new type of micro-structured fibers that benefit from a merge of "passive" PCF host structures with "active" LC guest materials and are responsible for diversity of new and uncommon spectral, propagation, and polarization properties. This combination has simultaneously boosted research activities in both fields of Liquid Crystals Photonics and Fiber Optics by demonstrating that optical fibers can be more "special" than previously thought. Simultaneously, photonic liquid crystal fibers create a new class of fiber-optic devices that utilize unique properties of the photonic crystal fibers and tunable properties of LCs. Compared to "classical" photonic crystal fibers, PLCFs can demonstrate greatly improved control over their optical properties. The paper discusses the latest advances in this field comprising PLCFs that are based on nanoparticles-doped LCs. Doping of LCs with nanoparticles has recently become a common method of improving their optical, magnetic, electrical, and physical properties. Such a combination of nanoparticles-based liquid crystals and photonic crystal fibers can be considered as a next milestone in developing a new class of fiber-based optofluidic systems.

  19. Broadband multiplex coherent anti-Stokes Raman scattering microscopy employing photonic-crystal fibers

    DEFF Research Database (Denmark)

    Andresen, Esben Ravn; Paulsen, Henrik Nørgaard; Birkedal, Victoria

    2006-01-01

    We demonstrate spectral multiplex coherent anti-Stokes Raman scattering (CARS) spectroscopy and microscopy based on a single Ti:sapphire oscillator and a nonlinear photonic-crystal fiber (PCF). The Stokes pulse is generated by spectral conversion of the laser pulse in a PCF. The pump pulse...... is either a highly chirped pulse or a pulse spectrally compressed in a PCF. A region of the Raman spectrum from 800 to 4000 cm(-1) is accessible with two different PCFs. Spectral resolution improvement by 1 order of magnitude over a transform-limited pump pulse utilizing a chirped or spectrally compressed...

  20. An 8-channel wavelength demultiplexer based on photonic crystal fiber

    Science.gov (United States)

    Malka, Dror

    2017-05-01

    We propose a novel 8-channel wavelength demultiplexer based on photonic crystal fiber (PCF) structures that operate at 1530nm, 1535nm, 1540nm, 1545nm, 1550nm, 1555nm, 1560nm and 1565nm wavelengths. The new design is based on replacing some air-holes zones with silicon nitride and lithium niobate materials along the PCF axis with optimization of the PCF size. The reason of using these materials is because that each wavelength has a different value of coupling length. Numerical investigations were carried out on the geometrical parameters by using a beam propagation method (BPM). Simulation results show that the proposed device can transmit 8-channel that works in the whole C-band (1530- 1565nm) with low crosstalk ((-16.88)-(-15.93) dB) and bandwidth (4.02-4.69nm). Thus, the device can be very useful in optical networking systems that work on dense wavelength division multiplexing (DWDM) technology.

  1. Emerging Applications of Photonic Crystal Fibers (Conference Presentation)

    Science.gov (United States)

    Russell, Philip S. J.

    2016-03-01

    The well-controlled guided modes and long path-lengths offered by both solid and hollow core photonic crystal fibres (PCFs) permit remarkable enhancements (and in some cases reductions) in many kinds of light-matter interaction. Recent examples include: Ultrafast spectrally bright deep and vacuum UV sources based on gas-filled hollow core PCF (pressure-tunable dispersion is a unique feature); generation of stable bright deep UV supercontinuum light in PCF drawn from the fluorozirconate glass ZBLAN; OAM-birefringent helically twisted PCF that preserves the sign of orbital angular momentum; and light-driven optoacoustic devices that permit stable high harmonic mode-locking of fiber ring lasers at GHz repetition rates.

  2. A Novel Low Loss, Highly Birefringent Photonic Crystal Fiber in THz Regime

    DEFF Research Database (Denmark)

    Hasanuzzaman, G. K. M.; Rana, Sohel; Habib, Selim

    2016-01-01

    We present a new kind of dual-hole unit-based porous-core hexagonal photonic crystal fiber (H-PCF) with low loss and high birefringence in terahertz regime. The proposed fiber offers simultaneously high birefringence and low effective material loss (EML) in the frequency range of 0.5-0.85 THz wit...

  3. Photonic crystal rod fibers: Understanding a new class of active optical waveguides

    DEFF Research Database (Denmark)

    Laurila, Marko

    In this PhD thesis an experimental study of modal characterization methods on large mode area photonic crystal fibers (PCFs) is performed and the development of a new ytterbium-doped photonic bandgap PCF rod fiber is presented. The first focus of this work is to use modal characterization methods...

  4. A Novel Low Loss, Highly Birefringent Photonic Crystal Fiber in THz Regime

    DEFF Research Database (Denmark)

    Hasanuzzaman, G. K. M.; Rana, Sohel; Habib, Selim

    2016-01-01

    We present a new kind of dual-hole unit-based porous-core hexagonal photonic crystal fiber (H-PCF) with low loss and high birefringence in terahertz regime. The proposed fiber offers simultaneously high birefringence and low effective material loss (EML) in the frequency range of 0.5-0.85 THz wit...

  5. Progress towards atomic vapor photonic microcells: Coherence and polarization relaxation measurements in coated and uncoated HC-PCF

    Science.gov (United States)

    Bradley, T. D.; McFerran, J. J.; Jouin, J.; Ilinova, E.; Thomas, P.; Benabid, F.

    2013-03-01

    We report a comparative study on dephasing mechanisms between inner core coated and uncoated sections of the same Kagome hypocycloid-shaped core hollow core photonic crystal fibers (HC-PCF) filled with rubidium vapor. The comparison is performed by measuring the atomic polarization relaxation and electromagnetically induced transparency (EIT) linewidth in Rb loaded polydimethylsiloxane (PDMS) inner wall coated and bare silica core Kagome HC-PCF. The measurements show a polarization relaxation time of 32μs in a PDMS coated Kagome HC-PCF and 24μs in uncoated Kagome HC-PCF. A minimum EIT linewidth of 6.2±0.8MHz is achieved in PDMS coated Kagome HC-PCF, and 8.3±0.9 MHz for the uncoated Kagome HC-PCF.

  6. Confinement loss in adiabatic photonic crystal fiber tapers

    Science.gov (United States)

    Kuhlmey, Boris T.; Nguyen, Hong C.; Steel, M. J.; Eggleton, Benjamin J.

    2006-09-01

    We numerically study confinement loss in photonic crystal fiber (PCF) tapers and compare our results with previously published experimental data. Agreement between theory and experiment requires taking into account hole shrinkage during the tapering process, which we measure by using a noninvasive technique. We show that losses are fully explained within the adiabatic approximation and that they are closely linked to the existence of a fundamental core-mode cutoff. This cutoff is equivalent to the core-mode cutoff in depressed-cladding fibers, so that losses in PCF tapers can be obtained semiquantitatively from an equivalent depressed-cladding fiber model. Finally, we discuss the definition of adiabaticity in this open boundary problem.

  7. Enhanced visible supercontinuum generation in seven-core photonic crystal fiber

    Science.gov (United States)

    Qi, Xue; Chen, Sheng-Ping; Liu, Tong; Hou, Jing

    2016-11-01

    The visible supercontinuum (SC) sources has played an important role in biomedical applications. However, the small core size of photonic crystal fiber (PCF) restrict the development of high power SC by its small mode field area. In addition, the zero dispersion wavelength (ZDW) of the PCF with small core diameter is usually below 1 μm, which is far away from the 1.06 μm laser which is the most commonly used pump source. As the ZDW of PCF shifts away from the pump, the intensity of visible light decreases correspondingly. We promote a new technique to get an enhanced visible SC with high output power, which involves enhanced visible SC generation in a seven-core PCF pumped by a high power 1016 nm fiber laser. Muti-core PCFs offer a possibility of scaling up the mode field area to a large extent without remarkable change in dispersion properties, which show great potential in high power SC generation. Using a 1016 nm fiber laser as the pump makes the pump wavelength closer to the ZDW of PCF, which could raise the intensity of visible light. In this paper, we report an enhanced visible SC generation ranging from 400 nm to 2300 nm in a seven-core PCF pumped by a 1016 nm picosecond fiber laser. The visible light (400 800 nm) occupies 31% of the total SC power 24 W and the power of the visible light is about 7.4 W.

  8. Thermo-tunable hybrid photonic crystal fiber based on solution-processed chalcogenide glass nanolayers

    DEFF Research Database (Denmark)

    Markos, Christos

    2016-01-01

    The possibility to combine silica photonic crystal fiber (PCF) as low-loss platform with advanced functional materials, offers an enormous range of choices for the development of fiber-based tunable devices. Here, we report a tunable hybrid silica PCF with integrated As2S3 glass nanolayers inside...... antiresonances by taking advantage the high thermo-optic coefficient of the solution-processed nanolayers. Two different hybrid fiber structures, with core diameter 10 and 5 mu m, were developed and characterized using a supercontinuum source. The maximum sensitivity was measured to be as high as 3.6 nm...

  9. Selective filling of photonic crystal fibers using focused ion beam milled microchannels

    DEFF Research Database (Denmark)

    Wang, Fei; Yuan, Scott Wu; Hansen, Ole;

    2011-01-01

    We introduce a versatile, robust, and integrated technique to selectively fill fluid into a desired pattern of air holes in a photonic crystal fiber (PCF). Focused ion beam (FIB) is used to efficiently mill a microchannel on the end facet of a PCF before it is spliced to a single-mode fiber (SMF......). Selected air holes are therefore exposed to the atmosphere through the microchannel for fluid filling. A low-loss in-line tunable optical hybrid fiber device is demonstrated by using such a technique. (C) 2011 Optical Society of America...

  10. Photon Polarization in Photonic Crystal Fibers under Compton Scattering

    Institute of Scientific and Technical Information of China (English)

    HAO Dong-shan; ZHANG Xiao-fu

    2007-01-01

    Using the quantum invariant theory and unitary transformation means, we study the influences of multi-photon nonlinear Compton scattering on the photon polarization in photonic crystal fibers(PCF). The results show that the photon polarization of the incident photon changes a lot due to scattered optical, and its general geometric phase factor, Hamiton number and evolution operator are definited both by the incident and scattered optical.

  11. Nonlinear Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Hansen, Kim Per

    2004-01-01

    Despite the general recession in the global economy and the collapse of the optical telecommunication market, research within specialty fibers is thriving. This is, more than anything else, due to the technology transition from standard all-glass fibers to photonic crystal fibers, which, instead...... of doping, use a microstructure of air and glass to obtain a refractive index difference between the core and the cladding. This air/glass microstructure lends the photonic crystal fibers a range of unique and highly usable properties, which are very different from those found in solid standard fibers....... The freedom to design the dispersion profile of the fibers is much larger and it is possible to create fibers, which support only a single spatial mode, regardless of wavelength. In comparison, the standard dispersion-shifted fibers are limited by a much lower index-contrast between the core and the cladding...

  12. Light propagation characteristics in photonic crystal fibers with α-power profiles of air hole diameter distributions and their application to fiber collimator

    Science.gov (United States)

    Yokota, Hirohisa; Higuchi, Keiichi; Imai, Yoh

    2016-08-01

    Light propagation characteristics in photonic crystal fibers (PCFs) with α-power profiles of air hole diameter distributions were theoretically investigated. It was clarified that the intensity peak of the beam propagating in the PCF with Gaussian beam excitation varied periodically with little power attenuation. It was found that the envelope of the periodic intensity variation depended on α. We theoretically demonstrated that the PCF with the α-power profile of the air hole diameter distribution could be applied to a collimator for a conventional PCF with uniform air holes in Gaussian beam excitation to reduce coupling loss, where a PCF of appropriate length with the α-power air hole diameter distribution was spliced to a conventional PCF. It was also found that the coupling efficiency was higher for a larger α.

  13. Ultra-high sensitivity Fabry-Perot interferometer gas refractive index fiber sensor based on photonic crystal fiber and Vernier effect.

    Science.gov (United States)

    Quan, Mingran; Tian, Jiajun; Yao, Yong

    2015-11-01

    An ultra-high sensitivity open-cavity Fabry-Perot interferometer (FPI) gas refractive index (RI) sensor based on the photonic crystal fiber (PCF) and Vernier effect is proposed and demonstrated. The sensor is prepared by splicing a section of PCF to a section of fiber tube fused with a section of single mode fiber. The air holes running along the cladding of the PCF enable the gas to enter or leave the cavity freely. The reflection beam from the last end face of the PCF is used to generate the Vernier effect, which significantly improves the sensitivity of the sensor. Experimental results show that the proposed sensor can provide an ultra-high RI sensitivity of 30899 nm/RIU. This sensor has potential applications in fields such as gas concentration analyzing and humidity monitoring.

  14. Core-cladding mode coupling and recoupling in photonic crystal fiber for enhanced overlap of evanescent field using long-period gratings.

    Science.gov (United States)

    He, Zonghu; Zhu, Yinian; Kanka, Jirí; Du, Henry

    2010-01-18

    Excitation of cladding modes has been achieved using long-period (LPGs) inscribed in an endlessly single-mode photonic crystal fiber (ESM PCF) by CO(2) laser irradiation. Core-cladding mode coupling and recoupling has resulted in marked improvement in the evanescent field overlap throughout the cladding air channels in the PCF-LPG, compared to the PCF alone. Our numerical simulation has shown that design optimization of the PCF-LPG configuration can lead to a field power overlap as high as 22% with a confinement loss of less than 1 dB/m in the cladding mode.

  15. Design of large-core single-mode Yb3+-doped photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xing-tao; ZHENG Yi; LIU Xiao-xu; ZHOU Gui-yao; LIU Zhao-lun; HOU Lan-tian

    2012-01-01

    The effective index of the cladding fundamental space-filing mode in photonic crystal fiber (PCF) is simulated by the effective index method.The variation of the effective index with the structure parameters of the fiber is achieved.For thefirst thne,the relations of the V parameter ofYb3+-doped PCF with the refractive index of core and the structure parameters of the fiber are provided.The single-mode characteristics of large-core yb3+-doped photonic crystal fibers with 7 and 19 missing air holes in the core are analyzed.The large-core single-mode Yb3+-doped photonic crystal fibers with core diameters of 50 μm,100 μm and 150 μm are designed.The results provide theory instruction for the design and fabrication of fiber.

  16. Design of photonic crystal fibers with anomalous dispersion

    Institute of Scientific and Technical Information of China (English)

    CHI Hao; ZHANG Xian-min; SHEN Lin-fang

    2006-01-01

    Photonic crystal fibers (PCFs) with anomalous dispersion in short wavelength region are significant for some applications, such as short wavelength soliton propagation, super continuum generation and short pulse fiber lasing.In this paper,a systematic method for designing PCFs with required anomalous dispersion region is proposed by using a finite difference solver and the scaling transformation of the waveguide dispersion of PCFs.Designed PCF can be anomalously dispersive in the region less than 1.3 μm,which is very difficult to realize in the traditional standard single-mode fibers.The effectiveness of the proposed method is approved by numerical results.

  17. Nonlinear Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Hansen, Kim Per

    2004-01-01

    , leading to reduced mode confinement and dispersion flexibility. In this thesis, we treat the nonlinear photonic crystal fiber – a special sub-class of photonic crystal fibers, the core of which has a diameter comparable to the wavelength of the light guided in the fiber. The small core results in a large...... nonlinear coefficient and in various applications, it is therefore possible to reduce the required fiber lengths quite dramatically, leading to increased stability and efficiency. Furthermore, it is possible to design these fibers with zero-dispersion at previously unreachable wavelengths, paving the way...... for completely new applications, especially in and near the visible wavelength region. One such application is supercontinuum generation. Supercontinuum generation is extreme broadening of pulses in a nonlinear medium (in this case a small-core fiber), and depending on the dispersion of the fiber, it is possible...

  18. Supercontinuum generation using a selectively water-filled photonic crystal fiber for enhancement in the visible spectral region

    Science.gov (United States)

    Yoshida, Eiichi; Wada, Akira; Karasawa, Naoki

    2016-07-01

    We generated a supercontinuum from a selectively water-filled photonic crystal fiber (PCF) for enhancement in the visible spectral region using an optical pulse from a Ti:sapphire oscillator at 804 nm. We prepared a 7-cm-long fused silica PCF, where the holes adjacent to the central core were filled with water, using a UV-curable adhesive to close holes selectively before filling holes with water by capillary force. Compared with that of the PCF without water, the group velocity dispersion curve of the selectively water-filled PCF became flatter near 800 nm and the intensity in the visible spectral region of the supercontinuum became higher and more uniform. The spectra simulated using the calculated dispersion properties of the selectively water-filled PCF showed good agreement with the experimental spectra.

  19. Long-period grating and its cascaded counterpart in photonic crystal fiber for gas phase measurement.

    Science.gov (United States)

    Tian, Fei; Kanka, Jiri; Du, Henry

    2012-09-10

    Regular and cascaded long period gratings (LPG, C-LPG) of periods ranging from 460 to 590 μm were inscribed in an endlessly single mode photonic crystal fiber (PCF) using CO(2) laser for sensing measurements of helium, argon and acetylene. High index sensitivities in excess of 1700 nm/RIU were achieved in both grating schemes with a period of 460 μm. The sharp interference fringes in the transmission spectrum of C-PCF-LPG afforded not only greatly enhanced sensing resolution, but also accuracy when the phase-shift of the fringe pattern is determined through spectral processing. Comparative numerical and experimental studies indicated LP(01) to LP(03) mode coupling as the principal coupling step for both PCF-LPG and C-PCF-LPG with emergence of multi-mode coupling at shorter grating periods or longer resonance wavelengths.

  20. Highly sensitive temperature sensor based on an isopropanol-filled photonic crystal fiber long period grating

    Science.gov (United States)

    Du, Chao; Wang, Qi; Zhao, Yong; Li, Jin

    2017-03-01

    A high sensitivity measurement method for temperature has been proposed and investigated based on an isopropanol-filled photonic crystal fiber long period grating (PCF-LPG). Due to the high thermo-optic coefficient (TOC) of isopropanol, the sensitivity of the proposed temperature sensor could be effectively improved by filling isopropanol in the air waveguides of PCF. It can be found that the resonant dip will be split in two dips after filling isopropanol and the two dips have different sensitivities to surrounding temperature. Because of PCF-LPG is sensitive to the refractive index (RI) of internal filled liquid, the isopropanol-filled PCF-LPG temperature sensor has a high sensitivities of 1.356 nm/°C in the range of 20-50 °C. The simplicity and the excellent performance of our proposed device make it potential for the applications of high-precision temperature measurement is required.

  1. Nanotag-enabled photonic crystal fiber as quantitative surface-enhanced Raman scattering optofluidic platform

    Energy Technology Data Exchange (ETDEWEB)

    Pinkhasova, Polina; Chen, Hui; Du, Henry, E-mail: hdu@stevens.edu [Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, New Jersey 07030 (United States); Kanka, Jiri [Institute of Photonics and Electronics, Academy of Sciences of the Czech Republic, Chaberska 57, 182 31 Prague (Czech Republic); Mergo, Pawel [Department of Optical Fibres Technology, Maria Curie-Sklodovska University, PI. M. Currie-Sklodowskiej 5, 20-031 Lublin (Poland)

    2015-02-16

    Core-shell nanotags that are active in surface-enhanced Raman scattering (SERS) and entrapped with thiocyanate (SCN) label molecules were immobilized in the air channels of suspended-core photonic crystal fiber (PCF) to impart quantitative capacity to SERS-based PCF optofluidic sensing platform. The Raman intensity of Rhodamine 6G increases with concentration, whereas the intensity of SCN remains constant when measured using this platform. The signal from the SCN label can be used as an internal reference to establish calibration for quantitative measurements of analytes of unknown concentrations. The long optical path-length PCF optofluidic platform integrated with SERS-active core-shell nanotags holds significant promise for sensitive quantitative chem/bio measurements with the added benefit of small sampling volume. The dependence of SERS intensity on the nanotag coverage density and PCF length was interpreted based on numerical-analytical simulations.

  2. Design of single mode spiral photonic crystal fiber for gas sensing applications

    Directory of Open Access Journals (Sweden)

    Md. Ibadul Islam

    2017-04-01

    Full Text Available In this paper, a spiral shape photonic crystal fiber (S-PCF has been suggested as a gas sensor for detecting toxic or colorless gases as well as monitoring the air pollution by metering gas condensate elements in production facilities. Our reported S-PCF is micro-structured where two layers porous core is encircled by a spiral shape cladding. The geometrical parameters have altered to optimize the parameters of the proposed structure. The numerical analysis of the proposed S-PCF is performed by utilizing finite element method (FEM. The relative sensitivity and birefringence of the proposed S-PCF are 55.10% and 7.23 × 10−3 respectively at the 1.33 μm wavelength that lies in the absorption line of toxic gases (methane and hydrogen fluoride. Besides, effective area, nonlinear coefficient and V parameters are also described briefly.

  3. Core temperature in super-Gaussian pumped air-clad photonic crystal fiber lasers compared with double-clad fiber lasers

    Indian Academy of Sciences (India)

    P Elahi; H Nadgaran; F Kalantarifard

    2007-03-01

    In this paper we investigate the core temperature of air-clad photonic crystal fiber (PCF) lasers pumped by a super-Gaussian (SG) source of order four. The results are compared with conventional double-clad fiber (DCF) lasers pumped by the same super-Gaussian and by top-hat pump profiles.

  4. High-birefringence photonic crystal fiber Michelson interferometer with cascaded fiber Bragg grating for pressure and temperature discrimination

    Science.gov (United States)

    Tan, Xiaoling; Geng, Youfu; Li, Xuejin

    2016-09-01

    A simple and compact interferometer for temperature and pressure discrimination is proposed and demonstrated experimentally. It consists of a short section of high-birefringence photonic crystal fiber (Hi-Bi PCF) and a cascaded fiber Bragg grating (FBG). In the Hi-Bi PCF, two orthogonal polarized modes are employed as optical arms to construct, such as a Michelson interferometer. Combined with a cascaded FBG, pressure and temperature measurements are discriminated by a matrix method, and the pressure sensitivity of Hi-Bi PCF is determined to be around 3.65 nm/MPa. The proposed Michelson interferometer is easy-to-fabricate, flexible, and low-cost, which shows great potential in future applications of remote sensing.

  5. Multiwatt octave-spanning supercontinuum generation in multicore photonic-crystal fiber.

    Science.gov (United States)

    Fang, Xiao-hui; Hu, Ming-lie; Huang, Li-li; Chai, Lu; Dai, Neng-li; Li, Jin-yan; Tashchilina, A Yu; Zheltikov, Aleksei M; Wang, Ching-yue

    2012-06-15

    High-power supercontinuum spanning over more than an octave was generated using a high power femtosecond fiber laser amplifier and a multicore nonlinear photonic crystal fiber (PCF). Long multicore PCFs (as long as 20 m in our experiments) are shown to enable supercontinuum generation in an isolated fundamental supermode, with the manifold of other PCF modes suppressed due to the strong evanescent fields coupling between the cores, providing a robust 5.4 W coherent supercontinuum output with a high spatial and spectral quality within the range of wavelengths from 500 to 1700 nm.

  6. Hollow-core photonic crystal fiber based multifunctional optical system for trapping, position sensing, and detection of fluorescent particles.

    Science.gov (United States)

    Shinoj, V K; Murukeshan, V M

    2012-05-15

    We demonstrate a novel multifunctional optical system that is capable of trapping, imaging, position sensing, and fluorescence detection of micrometer-sized fluorescent test particles using hollow-core photonic crystal fiber (HC-PCF). This multifunctional optical system for trapping, position sensing, and fluorescent detection is designed such that a near-IR laser light is used to create an optical trap across a liquid-filled HC-PCF, and a 473 nm laser is employed as a source for fluorescence excitation. This proposed system and the obtained results are expected to significantly enable an efficient integrated trapping platform employing HC-PCF for diagnostic biomedical applications.

  7. Photonic crystal fiber in-line Mach-Zehnder interferometer for explosive detection.

    Science.gov (United States)

    Tao, Chuanyi; Wei, Heming; Feng, Wenlin

    2016-02-08

    We report a photonic crystal fiber (PCF) in-line Mach-Zehnder interferometer used as a gas sensor device which exhibits high sensitivity to the explosive trinitrotoluene (TNT). The interferometric sensor head is formed by embedding a segment of large-mode-area/grapefruit PCF between standard single-mode fibers via butt coupling, which produces two small air gaps in between terminated fiber ends with ceramic ferrule connectors as coupling regions, which also serve as inlet/outlet for the gas. The spectral response of the interferometer is investigated in terms of its wavelength spectrum. The selectivity to TNT vapor is achieved by immobilizing a molecular recognition ployallylamine layer on the inner surface of the holey region of the PCF. The TNT-induced variations of the interference fringes are measured and the sensing capability of the proposed sensor is demonstrated experimentally.

  8. Photonic crystal fiber Mach-Zehnder interferometer for refractive index sensing.

    Science.gov (United States)

    Wang, Jian-Neng; Tang, Jaw-Luen

    2012-01-01

    We report on a refractive index sensor using a photonic crystal fiber (PCF) interferometer which was realized by fusion splicing a short section of PCF (Blaze Photonics, LMA-10) between two standard single mode fibers. The fully collapsed air holes of the PCF at the spice regions allow the coupling of PCF core and cladding modes that makes a Mach-Zehnder interferometer. The transmission spectrum exhibits sinusoidal interference pattern which shifts differently when the cladding/core surface of the PCF is immersed with different RI of the surrounding medium. Experimental results using wavelength-shift interrogation for sensing different concentrations of sucrose solution show that a resolution of 1.62 × 10(-4)-8.88 × 10(-4) RIU or 1.02 × 10(-4)-9.04 × 10(-4) RIU (sensing length for 3.50 or 5.00 cm, respectively) was achieved for refractive indices in the range of 1.333 to 1.422, suggesting that the PCF interferometer are attractive for chemical, biological, biochemical sensing with aqueous solutions, as well as for civil engineering and environmental monitoring applications.

  9. Extremely low-loss single-mode photonic crystal fiber in the terahertz regime

    DEFF Research Database (Denmark)

    Islam, Raonaqul; Hasanuzzaman, G. K M; Sadath, Md Anwar;

    2015-01-01

    This paper presents an updated design and numerical characterization of a rotated porous-core hexagonal photonic crystal fiber (PCF) for single-mode terahertz (THz) wave guidance. The simulation results are found using an efficient finite element method (FEM) which show a better and ultra-low eff...

  10. Harmonic Mode-Locked Fiber Laser based on Photonic Crystal Fiber Filled with Topological Insulator Solution

    Directory of Open Access Journals (Sweden)

    Yu-Shan Chen

    2015-04-01

    Full Text Available We reported that the photonic crystal fiber (PCF filled with TI:Bi2Te3 nanosheets solution could act as an effective saturable absorber (SA. Employing this TI-PCF SA device; we constructed an ytterbium-doped all-fiber laser oscillator and achieved the evanescent wave mode-locking operation. Due to the large cavity dispersion; the fundamental mode-locking pulse had the large full width at half maximum (FWHM of 2.33 ns with the repetition rate of ~1.11 MHz; and the radio frequency (RF spectrum with signal-to-noise ratio (SNR of 61 dB. In addition; the transition dynamics from a bunched state of pulses to harmonic mode-locking (HML was also observed; which was up to 26th order.

  11. Modal analysis of a large-mode area photonic crystal fiber amplifier using spectral-resolved imaging

    DEFF Research Database (Denmark)

    Laurila, Marko; Alkeskjold, Thomas T.; Lægsgaard, Jesper

    2011-01-01

    We perform modal characterization on an ytterbium-doped large mode area photonic-crystal-fiber (PCF) amplifier using spatial and spectral (S 2) resolved imaging and compare results to conventional cutoff methods. We apply numerical simulations and step-index fiber experiments to calibrate our...

  12. Progress in hollow core photonic crystal fiber for atomic vapour based coherent optics

    Science.gov (United States)

    Bradley, T. D.; Wang, Y. Y.; Alharbi, M.; Fourcade Dutin, C.; Mangan, B. J.; Wheeler, N. V.; Benabid, F.

    2012-03-01

    We report on progress in different hollow core photonic crystal fiber (HC-PCF) design and fabrication for atomic vapor based applications. We have fabricated a Photonic bandgap (PBG) guiding HC-PCF with a record loss of 107dB/km at 785nm in this class of fiber. A double photonic bandgap (DPBG) guiding HC-PCF with guidance bands centred at 780nm and 1064nm is reported. A 7-cell 3-ring Kagome HC-PCF with hypocycloid core is reported, the optical loss at 780nm has been reduced to 70dB/km which to the best of our knowledge is the lowest optical loss reported at this wavelength using HC-PCF. Details on experimental loading of alkali metal vapours using a far off red detuned laser are reported. This optical loading has been shown to decrease the necessary loading time for Rb into the hollow core of a fiber. The quantity of Rb within the fiber core has been enhanced by a maximum of 14% through this loading procedure.

  13. Polarization-dependent in-line quasi-Michelson interferometer based on PM-PCF reflection.

    Science.gov (United States)

    Du, Yanying; Qiao, Xueguang; Rong, Qiangzhou; Zhang, Jing; Feng, Dingyi; Wang, Ruohui; Sun, Hao; Hu, Manli; Feng, Zhongyao

    2013-05-20

    An in-line fiber quasi-Michelson interferometer (IFQMI) working on reflection is proposed and experimentally demonstrated. The sensing head is fabricated by splicing a section of polarization-maintaining photonic crystal fiber (PM-PCF) with a lead-in single mode fiber (SMF). Some cladding modes are excited into the PM-PCF via the mismatch-core splicing interface between PM-PCF and SMF. Besides, two orthogonal polarized-modes are formed due to the inherent multiholes cladding structure of the PM-PCF. A well-defined interference pattern is obtained as the result of cladding-orthogonal modes interference. The IFQMI with 20 cm long PM-PCF is proposed for strain and torsion measurements. A strain sensitivity of -1.3 pm/με and a torsion sensitivity of -19.17 pm/deg are obtained, respectively. The proposed device with 10 cm long PM-PCF exhibits a considered temperature sensitivity of 9.9 pm/°C. The IFQMI has a compact structure and small size, making it a good candidate for multiparameter measurements.

  14. Improved Gas Filling and Sealing of an HC-PCF

    Science.gov (United States)

    Poberezhskiy, Ilya; Meras, Patrick; Chang, Daniel; Spiers, Gary

    2008-01-01

    An improved packaging approach has been devised for filling a hollow-core photonic-crystal fiber (HC-PCF) with a gas, sealing the HC-PCF to retain the gas, and providing for optical connections and, optionally, a plumbing fitting for changing or augmenting the gas filling. Gas-filled HC-PCFs can be many meters long and have been found to be attractive as relatively compact, lightweight, rugged alternatives to conventional gas-filled glass cells for use as molecular-resonance frequency references for stabilization of lasers in some optical-metrology, lidar, optical-communication, and other advanced applications. Prior approaches to gas filling and sealing of HC-PCFs have involved, variously, omission of any attempt to connectorize the PCF, connectorization inside a vacuum chamber (an awkward and expensive process), or temporary exposure of one end of an HC-PCF to the atmosphere, potentially resulting in contamination of the gas filling. Prior approaches have also involved, variously, fusion splicing of HC-PCFs with other optical fibers or other termination techniques that give rise to Fresnel reflections of about 4 percent, which results in output intensity noise.

  15. Optical devices based on liquid crystal photonic bandgap fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard

    2005-01-01

    In this ph.d. work, an experimental and theoretical study on Liquid Crystal (LC) infiltrated Photonic Crystal Fibers (PCFs) has been carried out. PCFs usually, consists of an air/silica microstructure of air holes arranged in a triangular lattice surrounding a core defect defined by a missing air...... hole. The presence of a LC in the holes of the PCF transforms the fiber from a Total Internal Reflection (TIR) guiding type into a Photonic BandGap (PBG) guiding type, where light is confined to the silica core by coherent scattering from the LC-billed holes. The high dielectric and optical anisotropy...... of LCs combined with the unique waveguiding features of PBG fibers gives the LC filled PCFs unique tunable properties. PBG guidance has been demonstrated for different mesophases of LCs and various functional compact fibers has been demonstrated, which utilitzes the high thermo-optical and electro...

  16. Single gain peak from modulation instability in As2Se3 chalcogenide glass photonic crystal fiber

    Science.gov (United States)

    Wang, Helin; Yang, Aijun

    2016-09-01

    With the As2Se3 photonic crystal fiber (PCF), the effect of pump power and wavelength on modulation instability (MI) gain is studied in detail. Due to high Raman scattering effect and high nonlinearity of As2Se3 PCF, ultra-broadband MI gain is obtained when appropriate pump power and wavelength is chosen, and the optimal MI gain bandwidth reaches 2812 nm. More importantly, competing between Raman scattering and four-wave mixing results in a single gain peak observed in the anti-Stokes region of As2Se3 PCF when pump power is higher than about 3000 W, while there is no gain spectrum in the fiber Stokes region. The phenomenon is found for the first time, and the obtained single gain peak mainly results from Raman scattering effect.

  17. Thermal distribution analysis of multi-core photonic crystal fiber laser

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yi-bo; YAO Jian-quan; ZHANG Lei; WANG Yuan; WEN Wu-qi; JING Lei; DI Zhi-gang; KANG Jian-yi

    2012-01-01

    The thermal properties of photonic crystal fiber (PCF) laser with 18 circularly distributed cores are investigated by using full-vector finite element method (FEM).The results show that the 18-core PCF has a more effective thermal dispersion construction compared with the single core PCF and 19-core PCF.In addition,the temperature distribution of 18-core PCF laser with different thermal loads is simulated.The results show that the core temperature approaches the fiber drawing value of 1800 K approximately when the thermal load is above 80 W/m which corresponds to the pumping power of 600 W approximately,while the coating temperature approaches the damage value of about 550 K when the thermal load is above 15 W/m which corresponds to the pumping power of 110 W approximately.Therefore the fiber cooling is necessary to achieve power scaling.Compared with other different cooling systems,the copper cooling scheme is found to be an effective method to reduce the thermal effects.

  18. Study on single-mode photonic crystal fibers in wide wavelength range

    Institute of Scientific and Technical Information of China (English)

    Wei Chen; Jinyan Li; Shiyu Li; Haiqing Li; Zuowen Jiang; Jinggang Peng

    2007-01-01

    @@ The comparatively large mode field single-mode photonic crystal fibers (PCFs) were fabricated, the lightwave from 600- to 1600-nm wavelength along this PCF could be transmitted in single mode. The manufacturing process technologies of the PCFs were exploited, and the drawing parameters of PCFs were also presented. The structure parameters on the single-mode performance of PCFs were theoretically studied,and in practice the design was proved. The measurements of cut-off wavelength and light intensity distribution showed that the PCF had comparatively wide single-mode operating wavelength range.

  19. Transmission characteristics of high-power 589-nm laser beam in photonic crystal fiber

    Science.gov (United States)

    Ito, Meguru; Hayano, Yutaka; Saito, Norihito; Akagawa, Kazuyuki; Kato, Mayumi; Saito, Yoshihiko; Takazawa, Akira; Takami, Hideki; Iye, Masanori; Wada, Satoshi; Colley, Stephen A.; Dinkins, Matthew C.; Eldred, Michael; Golota, Taras I.; Guyon, Olivier; Hattori, Masayuki; Oya, Shin; Watanabe, Makoto

    2006-06-01

    We are developing Laser Guide Star Adaptive Optics (LGSAO) system for Subaru Telescope at Hawaii, Mauna Kea. We achieved an all-solid-state 589.159 nm laser in sum-frequency generation. Output power at 589.159 nm reached 4W in quasi-continuous-wave operation. To relay the laser beam from laser location to laser launching telescope, we used an optical fiber because the optical fiber relay is more flexible and easier than mirror train. However, nonlinear scattering effect, especially stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS), will happen when the inputted laser power increases, i.e., intensity at the fiber core exceed each threshold. In order to raise the threshold levels of each nonlinear scattering, we adopt photonic crystal fiber (PCF). Because the PCF can be made larger core than usual step index fiber (SIF), one can reduce the intensity in the core. We inputted the high power laser into the PCF whose mode field diameter (MFD) is 14 μm and the SIF whose MFD is 5 μm, and measured the transmission characteristics of them. In the case of the SIF, the SRS was happen when we inputted 2 W. On the other hand, the SRS and the SBS were not induced in the PCF even for an input power of 4 W. We also investigated polarization of the laser beam transmitting through the PCF. Because of the fact that the backscattering efficiency of exciting the sodium layer with a narrowband laser is dependent on the polarization state of the incident beam, we tried to control the polarization of the laser beam transmitted the PCF. We constructed the system which can control the polarization of input laser and measure the output polarization. The PCF showed to be able to assume as a double refraction optical device, and we found that the output polarization is controllable by injecting beam with appropriate polarization through the PCF. However, the Laser Guide Star made by the beam passed through the PCF had same brightness as the state of the polarization.

  20. Photonic-crystal fibers gyroscope

    Directory of Open Access Journals (Sweden)

    Ali Muse Haider

    2015-01-01

    Full Text Available In this paper we proposed to use of a photonic crystal fiber with an inner hollow defect. The use of such fibers is not affected by a material medium on the propagation of optical radiation. Photonic crystal fibers present special properties and capabilities that lead to an outstanding potential for sensing applications

  1. Power splitting of 1 × 16 in multicore photonic crystal fibers

    Science.gov (United States)

    Malka, Dror; Peled, Aaron

    2017-09-01

    A novel concept of 1 × 16 power splitter based on a variable multicore photonic crystal fiber (PCF) structure is described. Numerical simulations showed how the optical signal can be split in a PCF structure having dimensions of 60 μm × 60 μm × 3.582 mm. The coupled mode analysis and beam propagation method (BPM) was used for analyzing the multicore PCF based 1 × 16 splitter. The input optical signal at a wavelength of 1.55 μm inserted into the central core was divided into sixteen output cores, each with a 6.25% of the total power. The full width half maximum (FWHM) bandwidth found for each core was 100 nm.

  2. Monitoring of heparin concentration in serum by Raman spectroscopy within hollow core photonic crystal fiber

    Science.gov (United States)

    Khetani, Altaf; Tiwari, Vidhu S.; Harb, Alaa; Anis, Hanan

    2011-08-01

    The feasibility of using hollow core photonic crystal fiber (HC-PCF) in conjunction with Raman spectroscopy has been explored for real time monitoring of heparin concentration in serum. Heparin is an important blood anti-coagulant whose precise monitoring and controlling in patients undergoing cardiac surgery and dialysis is of utmost importance. Our method of heparin monitoring offers a novel alternative to existing clinical procedures in terms of accuracy, response time and sample volume. The optical design configuration simply involves a 785-nm laser diode whose light is coupled into HC-PCF filled with heparin-serum mixtures. By non-selectively filling HC-PCF, a strong modal field overlap is obtained. Consequently, an enhanced Raman signal (>90 times) is obtained from various heparin-serum mixtures filled HC-PCFs compared to its bulk counterpart (cuvette). The present scheme has the potential to serve as a `generic biosensing tool' for diagnosing a wide range of biological samples.

  3. Spectral properties of photon pairs generated by spontaneous four wave mixing in inhomogeneous photonic crystal fibers

    CERN Document Server

    Cui, Liang; Zhao, Ningbo

    2012-01-01

    The photonic crystal fiber (PCF) is one of the excellent media for generating photon pairs via spontaneous four wave mixing. Here we study how the inhomogeneity of PCFs affect the spectral properties of photon pairs from both the theoretical and experimental aspects. The theoretical model shows that the photon pairs born in different place of the inhomogeneous PCF are coherently superposed, and a modulation in the broadened spectrum of phase matching function will appear, which prevents the realization of spectral factorable photon pairs. In particular, the inhomogeneity induced modulation can be examined by measuring the spectrum of individual signal or idler field when the asymmetric group velocity matching is approximately fulfilled. Our experiments are performed by tailoring the spectrum of pulsed pump to satisfy the specified phase matching condition. The observed spectra of individual signal photons, which are produced from different segments of the 1.9 m inhomogeneous PCF, agree with the theoretical pr...

  4. Direct molecule-specific glucose detection by Raman spectroscopy based on photonic crystal fiber.

    Science.gov (United States)

    Yang, Xuan; Zhang, Alissa Y; Wheeler, Damon A; Bond, Tiziana C; Gu, Claire; Li, Yat

    2012-01-01

    This paper reports the first step toward the development of a glucose biosensor based on Raman spectroscopy and a photonic crystal fiber (PCF) probe. Historically, it has been very challenging to detect glucose directly by Raman spectroscopy due to its inherently small Raman scattering cross-section. In this work, we report the first quantitative glucose Raman detection in the physiological concentration range (0-25 mM) with a low laser power (2 mW), a short integration time (30 s), and an extremely small sampling volume (~50 nL) using the highly sensitive liquid-filled PCF probe. As a proof of concept, we also demonstrate the molecular specificity of this technique in the presence of a competing sugar, such as fructose. High sensitivity, flexibility, reproducibility, low cost, small sampling volume, and in situ remote sensing capability make PCF a very powerful platform for potential glucose detection based on Raman spectroscopy.

  5. Mach-Zehnder interferometric photonic crystal fiber for low acoustic frequency detections

    Energy Technology Data Exchange (ETDEWEB)

    Pawar, Dnyandeo; Rao, Ch. N.; Kale, S. N., E-mail: sangeetakale2004@gmail.com [Department of Applied Physics, Defence Institute of Advanced Technology (DU), Girinagar, Pune 411 025, Maharashtra (India); Choubey, Ravi Kant [Department of Applied Physics, Amity Institute of Applied Sciences, Amity University, Noida 201 313 (India)

    2016-01-25

    Low frequency under-water acoustic signal detections are challenging, especially for marine applications. A Mach-Zehnder interferometric hydrophone is demonstrated using polarization-maintaining photonic-crystal-fiber (PM-PCF), spliced between two single-mode-fibers, operated at 1550 nm source. These data are compared with standard hydrophone, single-mode and multimode fiber. The PM-PCF sensor shows the highest response with a power shift (2.32 dBm) and a wavelength shift (392.8 pm) at 200 Hz. High birefringence values and the effect of the imparted acoustic pressure on this fiber, introducing the difference between the fast and slow axis changes, owing to the phase change in the propagation waves, demonstrate the strain-optic properties of the sensor.

  6. Mach-Zehnder interferometric photonic crystal fiber for low acoustic frequency detections

    Science.gov (United States)

    Pawar, Dnyandeo; Rao, Ch. N.; Choubey, Ravi Kant; Kale, S. N.

    2016-01-01

    Low frequency under-water acoustic signal detections are challenging, especially for marine applications. A Mach-Zehnder interferometric hydrophone is demonstrated using polarization-maintaining photonic-crystal-fiber (PM-PCF), spliced between two single-mode-fibers, operated at 1550 nm source. These data are compared with standard hydrophone, single-mode and multimode fiber. The PM-PCF sensor shows the highest response with a power shift (2.32 dBm) and a wavelength shift (392.8 pm) at 200 Hz. High birefringence values and the effect of the imparted acoustic pressure on this fiber, introducing the difference between the fast and slow axis changes, owing to the phase change in the propagation waves, demonstrate the strain-optic properties of the sensor.

  7. Photonic crystal fiber coil sensor for water-depth sensing

    Science.gov (United States)

    Fan, Chen-Feng; Yu, Chin-Ping

    2013-05-01

    We fabricate a PCF coil sensor for water-depth sensing by winding a PCF on a plastic straw. Due to the bending-induced birefringence along the PCF, we can observe clear interference pattern in the output spectrum by placing the PCF coil into a Sagnac fiber loop. As we horizontally immerse the fabricated PCF coil into water, a nonlinear relationship between the water depth and the wavelength shift can be obtained. We have also measured the interference spectrum by vertically immersing the PCF coil into water. We can observe a linear relationship between the water depth and the wavelength shift, and the measured water-depth sensitivity for vertical immersion is -1.17 nm/mm.

  8. Photonic crystal fibers in biophotonics

    Science.gov (United States)

    Tuchin, Valery V.; Skibina, Julia S.; Malinin, Anton V.

    2011-12-01

    We observed recent experimental results in area of photonic crystal fibers appliance. Possibility of creation of fiberbased broadband light sources for high resolution optical coherence tomography is discussed. Using of femtosecond pulse laser allows for generation of optical radiation with large spectral width in highly nonlinear solid core photonic crystal fibers. Concept of exploitation of hollow core photonic crystal fibers in optical sensing is demonstrated. The use of photonic crystal fibers as "smart cuvette" gives rise to efficiency of modern optical biomedical analysis methods.

  9. The tension sensor of Photonic Crystal Fiber based on core-offset splicing and waist-enlarged fiber taper

    Science.gov (United States)

    Fu, Guangwei; Li, Qifeng; Li, Yunpu; Yang, Jiandong; Fu, Xinghu; Bi, Weihong; Li, Yanjun

    2016-10-01

    A tension sensor of Photonic Crystal Fiber(PCF) is presented based on core-offset splicing and waist-enlarged fiber taper. The tension response characteristics of the sensor are studied experimentally. To analyzing the modal interference, many samples with different PCF lengths between the two splicing areas, different core-offset distances and different waist-enlarged fiber taper diameters are fabricated and tested. When the tension range is 0 to 4000μɛ, the results show that the spectrum is blue shift with the increasing of the axial tension. The sensitivity is-2.1 pm/μɛ. The experimental results show that the tension sensitivity can be not influenced by the PCF lengths, the core-offset distances.The waist-enlarged fiber taper diameters and the tension sensor is very sensitive to axial tension and the relationship between the wavelength shift and tension is linearity. To determine the number of the interfering modes, the transmission spectra of these sensor is transformed by the fast fourier transform (FFT) method. There are several peaks in the spatial frequency spectra at these sensors. Only one cladding mode is dominantly excited, while the other cladding modes are weak. The spatial frequency is proportional to the differential mode group index. Compared with the traditional fiber sensor, this sensor has some advantages including the easily fabricated, simple structure and high sensitivity. It can be used in industrial production, building monitoring, aerospace and other fields.

  10. Air-guided photonic-crystal-fiber pulse-compression delivery of multimegawatt femtosecond laser output for nonlinear-optical imaging and neurosurgery

    Science.gov (United States)

    Lanin, Aleksandr A.; Fedotov, Il'ya V.; Sidorov-Biryukov, Dmitrii A.; Doronina-Amitonova, Lyubov V.; Ivashkina, Olga I.; Zots, Marina A.; Sun, Chi-Kuang; Ömer Ilday, F.; Fedotov, Andrei B.; Anokhin, Konstantin V.; Zheltikov, Aleksei M.

    2012-03-01

    Large-core hollow photonic-crystal fibers (PCFs) are shown to enable a fiber-format air-guided delivery of ultrashort infrared laser pulses for neurosurgery and nonlinear-optical imaging. With an appropriate dispersion precompensation, an anomalously dispersive 15-μm-core hollow PCF compresses 510-fs, 1070-nm light pulses to a pulse width of about 110 fs, providing a peak power in excess of 5 MW. The compressed PCF output is employed to induce a local photodisruption of corpus callosum tissues in mouse brain and is used to generate the third harmonic in brain tissues, which is captured by the PCF and delivered to a detector through the PCF cladding.

  11. Design and optimization of photonic crystal fiber based sensor for gas condensate and air pollution monitoring

    Science.gov (United States)

    Islam, Md. Ibadul; Ahmed, Kawsar; Sen, Shuvo; Chowdhury, Sawrab; Paul, Bikash Kumar; Islam, Md. Shadidul; Miah, Mohammad Badrul Alam; Asaduzzaman, Sayed

    2017-09-01

    In this paper, a hexagonal shape photonic crystal fiber (H-PCF) has been proposed as a gas sensor of which both micro-structured core and cladding are organized by circular air cavities. The reported H-PCF has a single layer circular core which is surrounded by a five-layer hexagonal cladding. The overall pretending process of the H-PCF is completed by using a full vectorial finite element method (FEM) with perfectly matched layer (PML) boundary condition. All geometrical parameters like diameters and pitches of both core and cladding regions have fluctuated with an optimized structure. After completing the numerical analysis, it is clearly visualized that the proposed H-PCF exhibits high sensitivity with low confinement loss. The investigated results reveal the relative sensitivity of 56.65% and confinement loss of 2.31×10-5 dB/m at the 1.33-μm wavelength. Moreover, effective area, nonlinearity, and V-parameter of the suggested PCF are also briefly described.

  12. Highly birefringent single mode spiral shape photonic crystal fiber based sensor for gas sensing applications

    Directory of Open Access Journals (Sweden)

    Md. Ibadul Islam

    2017-06-01

    Full Text Available This article represents a gas sensor based on spiral photonic crystal fiber (S-PCF for detecting harmful or colorless gasses and monitoring air pollution by metering gas condensate elements in production facilities. The proposed micro-structured S-PCF contains two layers porous core encircled by a spiral shape cladding. The geometrical parameters are tuned to fix the optimized S-PCF structure. The numerical analysis of the proposed S-PCF is performed by utilizing finite element method (FEM with circular perfectly match layer (C-PML. The relative sensitivity and birefringence of the recommended structure are 57.61% and 7.53 × 10−3 respectively at 1.33 μm wavelength on the absorption line of toxic gasses (methane and hydrogen fluoride. The exhibited beam divergence is about 4.1° at the same wavelength. Besides, beat length, nonlinear coefficient, effective area and V parameters are also described briefly for optimized S-PCF structure over broader wavelength range from 1 μm to 1.8 μm.

  13. Design of Nearly Zero Dispersion Flattened Photonic Crystal Fiber with Double Cladding

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; HOU Lan-Tian; SONG Jun-Jie; ZHOU Gui-Yao

    2009-01-01

    A novel design of nearly zero dispersion flattened photonic crystal fiber (PCF) with double cladding is proposed.To employ traditional stack and draw technology, the cladding is composed of a traditional triangular lattice of air-holes and silica. The dispersion of the fiber is mainly engineered by the small air holes in the inner cladding,which are easily preserved in the fiber drawing procedure. The large air-holes in the outer cladding are mainly for light confinement. Thus, the dispersion property of the PCF is insensitive to the deformation of the air holes in the outer cladding. Using 8 layers of air-hole ring, the loss of the fundamental mode for the PCF is as low as 0.13dB/km at 1.55μm. The dispersion of the PCF fluctuates from -0.023 to 0.021ps.km-1nm-1 in the range 1.45-1.625 μm.

  14. Photonic crystal fiber based chloride chemical sensors for corrosion monitoring

    Science.gov (United States)

    Wei, Heming; Tao, Chuanyi; Krishnaswamy, Sridhar

    2016-04-01

    Corrosion of steel is one of the most important durability issues in reinforced concrete (RC) structures because aggressive ions such as chloride ions permeate concrete and corrode steel, consequently accelerating the destruction of structures, especially in marine environments. There are many practical methods for corrosion monitoring in RC structures, mostly focusing on electrochemical-based sensors for monitoring the chloride ion which is thought as one of the most important factors resulting in steel corrosion. In this work, we report a fiber-optic chloride chemical sensor based on long period gratings inscribed in a photonic crystal fiber (PCF) with a chloride sensitive thin film. Numerical simulation is performed to determine the characteristics and resonance spectral response versus the refractive indices of the analyte solution flowing through into the holes in the PCF. The effective refractive index of the cladding mode of the LPGs changes with variations of the analyte solution concentration, resulting in a shift of the resonance wavelength, hence providing the sensor signal. This fiber-optic chemical sensor has a fast response, is easy to prepare and is not susceptible to electromagnetic environment, and can therefore be of use for structural health monitoring of RC structures subjected to such aggressive environments.

  15. Measurement of gas viscosity using photonic crystal fiber

    Science.gov (United States)

    Gao, R.-K.; Sheehe, S. L.; Kurtz, J.; O'Byrne, S.

    2016-11-01

    A new measurement technique for gas viscosity coefficient is designed and demonstrated using the technique of tunable diode laser absorption spectroscopy (TDLAS). Gas flow is driven by a pressure gradient between two gas cells, through a photonic crystal fiber (PCF) surrounded by a furnace for temperature adjustment. PCF with 20-micron diameter affords physical space for gas-light interaction and provides a basis for gas viscosity measurement by determining the time for flow to exit a capillary tube under the influence of a pressure gradient. Infrared radiation from a diode laser is coupled into the fiber to be guided through the gas, and the light attenuation due to absorption from the molecular absorbing species is measured by a photo detector placed at the exit of the fiber. A numerical model from Sharipov and Graur describing local number density distribution in a unsteady state is applied for the determination of gas viscosity, based on the number density of gas measured by the absorption of the laser light, using the Beer-Lambert law. The measurement system is confirmed by measuring the viscosity of CO2 as a reference gas.

  16. Photonic crystal fiber modal interferometer with Pd/WO3 coating for real-time monitoring of dissolved hydrogen concentration in transformer oil.

    Science.gov (United States)

    Zhang, Ya-Nan; Wu, Qilu; Peng, Huijie; Zhao, Yong

    2016-12-01

    A highly-sensitive and temperature-robust photonic crystal fiber (PCF) modal interferometer coated with Pd/WO3 film was fabricated and studied, aiming for real-time monitoring of dissolved hydrogen concentration in transformer oil. The sensor probe was fabricated by splicing two segments of a single mode fiber (SMF) with both ends of the PCF. Since the collapse of air holes in the PCF in the interfaces between SMF and PCF, a SMF-PCF-SMF interferometer structure was formed. The Pd/WO3 film was fabricated by sol-gel method and coated on the surface of the PCF by dip-coating method. When the Pd/WO3 film is exposed to hydrogen, both the length and cladding refractive index of the PCF would be changed, resulting in the resonant wavelength shift of the interferometer. Experimental results showed that the hydrogen measurement sensitivity of the proposed sensor can reach 0.109 pm/(μl/l) in the transformer oil, with the measurement range of 0-10 000 μl/l and response time less than 33 min. Besides, the proposed sensor was temperature-insensitive without any compensation process, easy to fabricate without any tapering, polishing, or etching process, low cost and quickly response without any oil-gas separation device. All these performances satisfy the actual need of real-time monitoring of dissolved hydrogen concentration in the transformer oil.

  17. Photonic crystal fiber modal interferometer with Pd/WO3 coating for real-time monitoring of dissolved hydrogen concentration in transformer oil

    Science.gov (United States)

    Zhang, Ya-nan; Wu, Qilu; Peng, Huijie; Zhao, Yong

    2016-12-01

    A highly-sensitive and temperature-robust photonic crystal fiber (PCF) modal interferometer coated with Pd/WO3 film was fabricated and studied, aiming for real-time monitoring of dissolved hydrogen concentration in transformer oil. The sensor probe was fabricated by splicing two segments of a single mode fiber (SMF) with both ends of the PCF. Since the collapse of air holes in the PCF in the interfaces between SMF and PCF, a SMF-PCF-SMF interferometer structure was formed. The Pd/WO3 film was fabricated by sol-gel method and coated on the surface of the PCF by dip-coating method. When the Pd/WO3 film is exposed to hydrogen, both the length and cladding refractive index of the PCF would be changed, resulting in the resonant wavelength shift of the interferometer. Experimental results showed that the hydrogen measurement sensitivity of the proposed sensor can reach 0.109 pm/(μl/l) in the transformer oil, with the measurement range of 0-10 000 μl/l and response time less than 33 min. Besides, the proposed sensor was temperature-insensitive without any compensation process, easy to fabricate without any tapering, polishing, or etching process, low cost and quickly response without any oil-gas separation device. All these performances satisfy the actual need of real-time monitoring of dissolved hydrogen concentration in the transformer oil.

  18. Bandgaps of the Chalcogenide Glass Hollow-Core Photonic Crystal Fiber

    Institute of Scientific and Technical Information of China (English)

    LI Shu-Guang; ZHOU Hong-Song; YIN Guo-Bing

    2011-01-01

    Bandgaps of chalcogenide glass hollow-core photonic crystal fibers (GLS HC-PCFs) are analyzed by using the plane-wave expansion method. A mid-infrared laser can propagate in these low confinement loss fibers when the wavelength falls into the bandgaps. For enlarging the bandgap width, an improved GLS HC-PCF is put forward, the normalized frequency kA of the improved fiber is from 7.2 to 8.5 in its first bandgap. The improved GLS HC-PCF with pitch of 4.2μm can transmit the lights with wavelengths ranging from 3.1μm to 3.7μm.%Bandgaps of chalcogenide glass hollow-core photonic crystal fibers (GLS HC-PCFs) are analyzed by using the plane-wave expansion method.A mid-infrared laser can propagate in these low confinement loss fibers when the wavelength falls into the bandgaps.For enlarging the bandgap width,an improved GLS HC-PCF is put forward,the normalized frequency κA of the improved fiber is from 7.2 to 8.5 in its first bandgap.The improved GLS HC-PCF with pitch of 4.2μm can transmit the lights with wavelengths ranging from 3.1 μm to 3.7 μm.Photonic crystal fibers (PCFs) can be classified into total internal reflection PCFs and photonic bandgap (PBG) PCFs[1] Solid core PCFs are one kind of the total internal reflection PCFs;hollow-core PCFs (HC-PCFs) are a kind of typical PBG fibers.The conception of HC-PCFs was first proposed by Russel in 1991.[2] Later,it was theoretically demonstrated by Birks et al.[3] in 1995.A bandgap photonic crystal fiber was mde by Knight et al.[4] for the first time in 1998.On the basis of these works,the first HC-PCF was designed and made by Cregan et al.[5] in 1999.

  19. Bandgaps of the Chalcogenide Glass Hollow-Core Photonic Crystal Fiber

    Science.gov (United States)

    Li, Shu-Guang; Zhou, Hong-Song; Yin, Guo-Bing

    2011-11-01

    Bandgaps of chalcogenide glass hollow-core photonic crystal fibers (GLS HC-PCFs) are analyzed by using the plane-wave expansion method. A mid-infrared laser can propagate in these low confinement loss fibers when the wavelength falls into the bandgaps. For enlarging the bandgap width, an improved GLS HC-PCF is put forward, the normalized frequency kΛ of the improved fiber is from 7.2 to 8.5 in its first bandgap. The improved GLS HC-PCF with pitch of 4.2 μm can transmit the lights with wavelengths ranging from 3.1 μm to 3.7 μm.

  20. Experiment study of wavelength conversion in a dispersion-flattened photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    Qiuguo Wang; Bojun Yang; Lan Zhang; Hu Zhang; Li He

    2007-01-01

    @@ Wavelength conversion based on four-wave mixing (FWM) has been demonstrated using a 40-m dispersion flattened highly nonlinear photonic crystal fiber (HNL-PCF). A conversion efficiency of -26 dB for a pump power of 19.5 dBm and a conversion bandwidth of 28 nm have been obtained, which are limited by the continuous wave (CW) laser wavelength range and tunability of optical band pass filters (OBPFs).

  1. Design of triangular core LMA-PCF with low-bending loss and low non-linearity for laser application

    Science.gov (United States)

    Kabir, Sumaiya; Khandokar, Md. Rezwanul Haque; Khan, Muhammad Abdul Goffar

    2016-07-01

    In this paper we characterize the design of a simple large-mode area photonic crystal fiber (LMA-PCF) with low bending loss and low non-linearity. The finite element method (FEM) with perfectly matched boundary layer (PML) is used to investigate the guiding properties. According to simulation the characterized four ring fluorine doped triangular core LMA-PCF achieves 1500 μm2 effective mode area with a low bending loss of 10-5dB/km at the wavelength of 1.064 μm and at a bending radius of 40 cm which is suitable for high power fiber laser.

  2. Plasmonic excitations on metallic nanowires embedded in silica photonic crystal fibers

    Energy Technology Data Exchange (ETDEWEB)

    Prill Sempere, Luis

    2010-06-17

    This thesis describes the theoretical and experimental investigation of metal-filled photonic crystal fibers (PCFs) and their fabrication. The thesis explains how to overcome the obstacles when infiltrating molten metals into sub-micron holes in fused silica (SiO{sub 2}) PCF. The optical properties of such filled fibers are theoretically and experimentally investigated, focusing on the coupling between the core mode of the fibers and the surface plasmon polaritons (SPPs) on the metal wires. The thesis introduces the ideas, physical challenges and results of two new filling techniques: the pressure cell technique and the splicing technique. These techniques make it possible for the first time to fill different fiber structures with sub-micron sized holes, such as PCFs and single-hole capillaries, with different metals like gold (Au) and silver (Ag). Samples with hole diameters between 120 nm and 20 {mu}m and aspect ratios as high as 75000 have been realized. Theoretical simulations and models have been developed in order to understand the optical behavior of these novel structures. The light guided in the core of the filled PCF structure will couple to SPP modes on the wires. Several measurements have been performed to determine the resonance wavelengths and losses of such filled PCF structures. Also, different phenomena such as the shift of the resonance position with the wire diameter or pitch and the polarization dependence of SPP in polarization maintaining (PM)-PCF have been investigated. The fabrication of free standing metal arrays was another focus of this work. The critical question was how to remove the surrounding SiO{sub 2} from the metal wires. Two different approaches have been tried: etching of the SiO{sub 2} and cleaving the PCF. (orig.)

  3. Time-stretch analog-to-digital conversion with a photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    TENG Yun; YU Chong-xiu; YUAN Jin-hui; CHEN Jing-xuan; JIN Cang; XU Qian

    2011-01-01

    All-optical analog-to-digital conversion (ADC) has been extensively researched to break through the inherently limited operating speed of electronic devices. In this paper, we use the photonic crystal fiber (PCF) for time-stretch (TS) analog-todigital (A/D) conversion system through generating low noise, linear chirp distribution and fiat super-continuum (SC).Based on the radio frequency (RF) analog signal modulated to the linearly chirped super-continuum, the large-dispersion photonic crystal fiber is used for time-domain stretching.

  4. The effect of PCF combiners on the whole loss under different lengths of transition zone

    Science.gov (United States)

    Zhou, Hang; Chen, Zilun; Li, Jie; Hou, Jing; Chen, Jinbao

    2011-08-01

    Because of the diversified properties Fiber Laser affords a wide field of application. But restricted by nonlinear effects, heat damage and other elements, it is impossible to increase the output power unlimitedly. When single fiber can't meet, it needs to use Fiber Laser through beam combination to get high output power. Undoubtedly combiners play an important role for increasing the output power of Fiber Laser. The advent of Photonic crystal fiber (PCF) abound the kinds of combiners. It has numerous benefits and widespread application value. First, build the model of PCF combiners. Then through Finite Difference Method(FDM), calculate the effect of PCF combiners on the whole loss under different lengths of transition zone. Finally, compare the results. Through the results of numerical simulation calculation: when the length of Transition zone L is shorter than the diffraction length of the tapered L0, loss will go down with the increase of L; however, when L is far longer than L0, the increase of L will have negligible effect on the decrease of loss. So the conclusion is significant to both increase the performance of Photonic crystal fiber combiner and decrease the loss.

  5. Grapefruit photonic crystal fiber long period gratings sensor for DNT sensing application

    Science.gov (United States)

    Tao, Chuanyi; Li, Jingke; Zhu, Tenglong

    2016-10-01

    The detection of explosives and their residues is of great importance in public health, antiterrorism and homeland security applications. The vapor pressures of most explosive compounds are extremely low and attenuation of the available vapor is often great due to diffusion in the environment, making direct vapor detection difficult. In reality bomb dogs are still the most efficient way to quickly detect explosives on the spot. Many formulations of TNT-based explosives contain DNT residues. The use of long period gratings (LPGs) formed in grapefruit photonic crystal fiber (PCF) with thin-film overlay coated on the inner surface of air holes for gas sensing is demonstrated. A gas analyteinduced index variation of the thin-film immobilized on the inner surface of the holey region of the fiber can be observed by a shift of the resonance wavelength. We demonstrate a 2,4-dinitrotoluene (DNT) sensor using grapefruit PCF-LPGs. Coating with gas-sensitive thin-film on the inner surface of the air holes of the grapefruit PCF-LPG could provide a promising platform for rapid highly sensitive gas sensing. A rapid and highly sensitive detection of DNT has been demonstrated using the grapefruit PCF-LPG sensor to show the feasibility of the proposed approach.

  6. Theoretical simulation of a polarization splitter based on dual-core soft glass PCF with micron-scale gold wire

    Science.gov (United States)

    Liu, Qiang; Li, Shuguang; Wang, Xinyu; Shi, Min

    2016-12-01

    A polarization splitter based on dual-core soft glass photonic crystal fiber (PCF) filled with micron-scale gold wire is proposed. The characteristics of the polarization splitter are studied by changing the structural parameters of the PCF and the diameter of the gold wire with the finite element method (FEM). The simulation results reveal that the coupling length ratio of the soft glass-based PCF is close to 2 and the corresponding curve is more flat than that of the silica-based PCF. The broadband bandwidth is 226 nm in which the extinction ratio is lower than -20 dB by the soft glass-based PCF, i.e., from 1465 nm to 1691 nm which is competitive in the reported polarization splitters, and the bandwidth is just 32 nm by the silica-based PCF. The insertion loss by our polarization splitter is just 0.00248 dB and 0.43 dB at the wavelength of 1.47 μm and 1.55 μm. The birefringence is obviously increased and the coupling length is decreased by filling gold wire into the soft glass-based or the silica-based PCF. Also the birefringence based on the silica-based PCF is much larger than that based on the soft glass-based PCF whether or not the gold wire is introduced. The fabrication tolerance of the polarization splitter is also considered by changing the structural parameters. The polarization splitter possesses broad bandwidth, low insertion loss, simple structure and high fabrication tolerance. Project supported by the National Natural Science Foundation of China (Grant Nos. 61178026, 61475134, and 61505175).

  7. Temporal nonlinear beam dynamics in infiltrated photonic crystal fibers

    DEFF Research Database (Denmark)

    Bennet, Francis; Rosberg, Christian Romer; Neshev, Dragomir N.

    of nonlinear beam reshaping occurring on a short time scale before the establishment of a steady state regime. In experiment, a 532nm laser beam can be injected into a single hole of an infiltrated PCF cladding structure, and the temporal dynamics of the nonlinear response is measured by monitoring......Liquid-infiltrated photonic crystal fibers (PCFs) offer a new way of studying light propagation in periodic and discrete systems. A wide range of available fiber structures combined with the ease of infiltration opens up a range of novel experimental opportunities for optical detection and bio......-sensing as well as active devices for all-optical switching at low (mW) laser powers. Commercially available PCFs infiltrated with liquids also provide a versatile and compact tool for exploration of the fundamentals of nonlinear beam propagation in periodic photonic structures. To explore the full scientific...

  8. Bend-insensitive single-mode photonic crystal fiber with ultralarge effective area for dual applications

    Science.gov (United States)

    Islam, Md. Asiful; Alam, M. Shah

    2013-05-01

    A novel photonic crystal fiber (PCF) having circular arrangement of cladding air holes has been designed and numerically optimized to obtain a bend insensitive single mode fiber with large mode area for both wavelength division multiplexing (WDM) communication and fiber-to-the-home (FTTH) application. The bending loss of the proposed bent PCF lies in the range of 10-3 to 10-4 dB/turn or lower over 1300 to 1700 nm, and 2 × 10-4 dB/turn at the wavelength of 1550 nm for a 30-mm bend radius with a higher order mode (HOM) cut-off frequency below 1200 nm for WDM application. When the whole structure of the PCF is scaled down, a bending loss of 6.78×10-4 dB/turn at 1550 nm for a 4-mm bend radius is obtained, and the loss remains in the order of 10-4 dB/turn over the same range of wavelength with an HOM cut-off frequency below 700 nm, and makes the fiber useful for FTTH applications. Furthermore, this structure is also optimized to show a splice loss near zero for fusion-splicing to a conventional single-mode fiber (SMF).

  9. Photonic crystal fibers -

    DEFF Research Database (Denmark)

    Libori, Stig E. Barkou

    2002-01-01

    During this ph.d. work, attention has been focused on understanding and analyzing the modal behavior of micro-structured fibers. Micro-structured fibers are fibers with a complex dielectric toplogy, and offer a number of novel possibilities, compared to standard silica based optical fibers. The t...

  10. Numerical modeling of mid-infrared fiber optical parametric oscillator based on the degenerated FWM of tellurite photonic crystal fiber.

    Science.gov (United States)

    Cheng, Huihui; Luo, Zhengqian; Ye, Chenchun; Huang, Yizhong; Liu, Chun; Cai, Zhiping

    2013-01-20

    Mid-infrared fiber optical parametric oscillators (MIR FOPOs) based on the degenerate four-wave mixing (DFWM) of tellurite photonic crystal fibers (PCFs) are proposed and modeled for the first time. Using the DFWM coupled-wave equations, numerical simulations are performed to analyze the effects of tellurite PCFs, single-resonant cavity, and pump source on the MIR FOPO performances. The numerical results show that: (1) although a longer tellurite PCF can decrease the pump threshold of MIR FOPOs to a few watts only, the high conversion-efficiency of MIR idler usually requires a short-length optimum PCF with low loss; (2) compared with the single-pass DFWM configurations of the MIR fiber sources published previously, the stable oscillation of signal light in single-resonant cavity can significantly promote the MIR idler output efficiency. With a suggested tellurite PCF as parametric gain medium, the theoretical prediction indicates that such a MIR FOPO could obtain a wide MIR-tunable range and a high conversion efficiency of more than 10%.

  11. High Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice

    Directory of Open Access Journals (Sweden)

    Haiyang Wang

    2016-10-01

    Full Text Available A refractive index sensor based on dual-core photonic crystal fiber (PCF with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM. Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33–1.41. Numerical simulation results show that the highest sensitivity can be up to 22,983 nm/RIU(refractive index unit when the analyte refractive index is 1.41. The lowest sensitivity can reach to 21,679 nm/RIU when the analyte refractive index is 1.33. The sensor we proposed has significant advantages in the field of biomolecule detection as it provides a wide-range of detection with high sensitivity.

  12. High Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice.

    Science.gov (United States)

    Wang, Haiyang; Yan, Xin; Li, Shuguang; An, Guowen; Zhang, Xuenan

    2016-10-08

    A refractive index sensor based on dual-core photonic crystal fiber (PCF) with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM). Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33-1.41. Numerical simulation results show that the highest sensitivity can be up to 22,983 nm/RIU(refractive index unit) when the analyte refractive index is 1.41. The lowest sensitivity can reach to 21,679 nm/RIU when the analyte refractive index is 1.33. The sensor we proposed has significant advantages in the field of biomolecule detection as it provides a wide-range of detection with high sensitivity.

  13. Optical chromatography using a photonic crystal fiber with on-chip fluorescence excitation.

    Science.gov (United States)

    Ashok, P C; Marchington, R F; Mthunzi, P; Krauss, T F; Dholakia, K

    2010-03-15

    We describe the realization of integrated optical chromatography, in conjunction with on-chip fluorescence excitation, in a monolithically fabricated poly-dimethylsiloxane (PDMS) microfluidic chip. The unique endlessly-single-mode guiding property of the Photonic Crystal Fiber (PCF) facilitates simultaneous on-chip delivery of beams to perform optical sorting in conjunction with fluorescence excitation. We use soft lithography to define the chip and insert the specially capped PCF into it through a predefined fiber channel that is intrinsically aligned with the sorting channel. We compare the performance of the system to a standard ray optics model and use the system to demonstrate both size-driven and refractive index-driven separations of colloids. Finally we demonstrate a new technique of enhanced optofluidic separation of biological particles, by sorting of human kidney embryonic cells (HEK-293), internally tagged with fluorescing microspheres through phagocytocis, from those without microspheres and the separation purity is monitored using fluorescence imaging.

  14. Supercontinuum Generation in Normal-dispersion Photonic Crystal Fiber Using Picosecond Pulse

    Institute of Scientific and Technical Information of China (English)

    YAO Li; HE Li; YANG Bo-jun

    2007-01-01

    Studied is the Super-continuum(SC) generation of a normal-dispersion photonic crystal fiber(PCF) using picosecond pulse excitation. In experimental analyses, a 237 nm broadband infrared continuum was generated pumped at 1 550 nm(normal dispersion regime) by 1.6 ps pulses from an erbium-doped fiber laser. In addition, we conduct the numerical analyses of SC based on generalized nonlinear Schr dionger equation. The results have been applied to investigate the dominant physical processes underlie the generation of SC. We conclude that dispersion, self-phase modulation(SPM),four-wave-mixing(FWM) and Raman scattering are determinants of SC generation rather than fission of soliton in normal-dispersion PCF.

  15. Solid-core and hollow-core photonic crystal fiber for generation of bright ultraviolet light (Conference Presentation)

    Science.gov (United States)

    Joly, Nicolas Y.; Jiang, Xin; Travers, John C.; Ermolov, Alexey; Russell, Philip S.

    2016-09-01

    Over the last two decades the interest in photonic crystal fiber (PCF) has grown considerably, particularly in nonlinear optics where it allows enhanced control over the dispersion landscape. Although silica is the material most commonly used to fabricate PCF, its limited window of transmission and its susceptibility to optical damage at wavelengths below 350nm is driving the development of fibers made from glasses with transmission windows extending into the deep ultraviolet and the mid-infrared. An alternative is offered by gas-filled hollow-core fiber, in which the light propagates predominantly in the gas. In kagomé-style hollow-core PCF filled with noble gas, the weak anomalous dispersion of the empty fiber is balanced by the normal dispersion of the filling gas, resulting in a versatile system whose dispersion landscape can be adjusted in real time [Travers et al., JOSAB 28, A11 (2011)]. Under appropriate conditions the launched pulse undergoes soliton self-compression followed by emission of a band of dispersive radiation in the UV. UV light tunable down to 113 nm has been generated with this technique [Russell et al., Nat. Photon. 8, 278 (2014)]. Solid-core ZBLAN (fluorozirconate) glass PCF is transparent from 0.2 to 7.8µm. Launching 1nJ 140fs pulses at 1µm wavelength into a 1µm diameter core resulted, after 4cm of propagation, in generation of a supercontinuum spectrum extending from 210nm to beyond 2µm. In strong contrast to silica PCF, the ZBLAN PCF showed no signs of any solarization-related damage, even when operating over many hours [Jiang et al., Nat. Photon. 9, 133 (2015)].

  16. Thermal effect on CFRP ablation with a 100-W class pulse fiber laser using a PCF amplifier

    Science.gov (United States)

    Sato, Yuji; Tsukamoto, Masahiro; Matsuoka, Fumihiro; Ohkubo, Tomomasa; Abe, Nobuyuki

    2017-09-01

    An experimental study on CFRP processing is presented using a high-power pulsed fiber laser operated at a 1064-nm fundamental wavelength, a 100-W average power, a 1-MHz repetition rate, and a 10-ns pulse width under ambient air, a dry air jet, or a nitrogen gas jet. Raman spectroscopy and scanning electron microscopy are conducted to measure the heat-affected zone (HAZ) quantitatively. Here, the HAZ is defined as the sum of the matrix evaporation zone (MEZ) and the resin alteration zone (RAZ). The MEZ, RAZ, and HAZ in air exceed 600, 2550, and 3150 μm, respectively. In the case of N2 gas jet, the MEZ, RAZ, and HAZ are 30, 88, and 118 μm, respectively. The results show that a nitrogen gas jet most effectively suppresses the HAZ by suppressing oxidization of the carbon fiber and cooling of heat accumulation. Additionally, the cutting speed with a dry air jet or a nitrogen gas jet increases by about 10% compared to that in ambient air.

  17. Super Continuum Generation at 1310nm in a Highly Nonlinear Photonic Crystal Fiber with a Minimum Anomalous Group Velocity Dispersion

    Directory of Open Access Journals (Sweden)

    Ashkan Ghanbari

    2014-12-01

    Full Text Available In the present study, we investigate the evolution of the super continuum generation (SCG through the triangular photonic crystal fiber (PCF at 1310nm by using both full-vector multi pole method (M.P.M and novel concrete algorithms: Symmetric Split-step Fourier (SSF and fourth order Runge Kutta(RK4 which is an accurate method to solve the general nonlinear Schrodinger equation (GNLSE. We propose an ideal solid-core PCF structure featuring a minimum anomalous group velocity dispersion (GVD, small higher order dispersions (HODs and enhanced nonlinearity for appropriate super continuum generation with low input pulse energies over discrete distances of the PCF. We also investigate the impact of the linear and nonlinear effects on the super continuum spectra in detail and compare the results with different status.

  18. Design and optimization of highly nonlinear low-dispersion crystal fiber with high birefringence for four-wave mixing.

    Science.gov (United States)

    Zhang, Ya-Ni; Ren, Li-Yong; Gong, Yong-Kang; Li, Xiao-Hui; Wang, Lei-Ran; Sun, Chuan-Dong

    2010-06-01

    We have proposed a novel type of photonic crystal fiber (PCF) with low dispersion and high nonlinearity for four-wave mixing. This type of fiber is composed of a solid silica core and a cladding with a squeezed hexagonal lattice elliptical airhole along the fiber length. Its dispersion and nonlinearity coefficient are investigated simultaneously by using the full vectorial finite element method. Numerical results show that the proposed highly nonlinear low-dispersion fiber has a total dispersion as low as +/-2.5 ps nm(-1) km(-1) over an ultrabroad wavelength range from 1.43 to 1.8 microm, and the corresponding nonlinearity coefficient and birefringence are about 150 W(-1) km(-1) and 2.5x10(-3) at 1.55 microm, respectively. The proposed PCF with low ultraflattened dispersion, high nonlinearity, and high birefringence can have important application in four-wave mixing.

  19. Improved hollow-core photonic crystal fiber design for delivery of nanosecond pulses in laser micromachining applications.

    Science.gov (United States)

    Shephard, Jonathan D; Couny, Francois; Russell, Phillip St J; Jones, Julian D C; Knight, Jonathan C; Hand, Duncan P

    2005-07-20

    We report the delivery of high-energy nanosecond pulses (approximately 65 ns pulse width) from a high-repetition-rate (up to 100 kHz) Q-switched Nd:YAG laser through the fundamental mode of a hollow-core photonic crystal fiber (HC-PCF) at 1064 nm. The guided mode in the HC-PCF has a low overlap with the glass, allowing delivery of pulses with energies above those attainable with other fibers. Energies greater than 0.5 mJ were delivered in a single spatial mode through the hollow-core fiber, providing the pulse energy and high beam quality required for micromachining of metals. Practical micromachining of a metal sheet by fiber delivery has been demonstrated.

  20. Strain and temperature characterization of LPGs written by CO2 laser in pure silica LMA photonic crystal fibers

    Science.gov (United States)

    Chaves, Roberta Cardoso; Pohl, Alexandre de Almeida Prado; Abe, Ilda; Sebem, Renan; Paterno, Aleksander

    2015-09-01

    This paper reports on the writing of long period gratings (LPGs) in a six-ring pure silica solid core, and large mode area photonic crystal fiber (fiber core diameter ρ = 10.1 μm) using a CO2 laser system, and the characterization of their strain and temperature sensitivities. Temperature and strain sensitivities in the order of -19.6 pm/°C and -88 pm/μɛ, respectively, were obtained, which were comparable or surpassed values of the similar photonic crystal fiber (PCF)-based LPG or sensor configurations found in the literature.

  1. Low coherence technique to interrogate optical sensors based on selectively filled double-core photonic crystal fiber for temperature measurement

    Science.gov (United States)

    Li, Kun; Jiang, Meng; Zhao, Zhongze; Wang, Zeming

    2017-04-01

    In this paper, an optical fiber sensing system based on low coherence interferometry (LCI) is proposed and demonstrated to interrogate sensors comprised of selectively filled double-core photonic crystal fiber (SFDC-PCF). The sensor used here is made by selectively filling about 1/3 area of air holes in the cladding of photonic crystal fiber with distilled water. So the dual-core in the sensor has different effective refractive indices, resulting in a phase delay between two lights transmitting in the fiber. The phase delay of the sensor can be compensated by a Mach-Zehnder interferometer with a scanning optical tunable delay line in one arm of the interferometer, namely temporal interrogation. By tracking the value of phase delay, the change of the measurand can be detected. Temperature measurement is carried out to testify the system performance. An average sensitivity of 0.9 μm/°C is achieved within the temperature range of 29-92 °C. This work provides a new thinking for fiber sensing technology based on LCI. The proposed all-fiber sensing system, with the merits of cost-effective, stability, and flexibility, can demodulate the SFDC-PCF sensor signals well. Further improvements such as better sensitivity, larger measurement range and multiplexing efficiency can be realized by tailoring the PCF sensor's structure.

  2. A new photonic crystal fiber design on the high negative ultra-flattened dispersion for both X and Y polarization modes

    DEFF Research Database (Denmark)

    Mahmud, Russel Reza; Razzak, S. M Abdur; Hasan, Md Imran;

    2016-01-01

    Analysis of numerical design and properties of a new silica based photonic crystal fiber (PCF) are proposed in this manuscript. The design performs ultra-flattened negative chromatic dispersion (UNCD) in the optical windows 2nd and 3rd involving O to U bands in the infrared (IF) portion. The guid...

  3. Analysis of liquid crystal properties for photonic crystal fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei

    2009-01-01

    We analyze the bandgap structure of Liquid Crystal infiltrated Photonic Crystal Fibers depending on the parameters of the Liquid Crystals by means of finite element simulations. For a biased Liquid Crystal Photonic Crystal Fiber, we show how the tunability of the bandgap position depends...... on the Liquid Crystal parameters....

  4. Photonic crystal fiber-based immunosensor for high-performance detection of alpha fetoprotein.

    Science.gov (United States)

    Liu, Xiaoxia; Song, Xingda; Dong, Zhiyong; Meng, Xiaoting; Chen, Yiping; Yang, Li

    2017-05-15

    We have developed a sensitive photonic crystal fiber (PCF)-based immunosensor for detection of alpha fetoprotein (AFP). The unique PCF possesses a morphology characterized by numerous pore structures and a large surface area-to-volume ratio, which can be used as an immune-reaction carrier to improve the sensitivity and reaction speed of AFP detection. The PCF-based immunosensor possesses a low limit of detection of 0.1ng/mL, which is five times lower than that of the capillary-based sensor and 35 times lower than that of the traditional enzyme-linked immunosorbent assay. The wide linear dynamic range of 0.1-150ng/mL makes the developed immunosensor suitable for clinical practice. The proposed method was successfully applied to AFP detection in a clinical serum sample with acceptable precision. It is indicated that the present PCF-based immunosensor could be used as an attractive analytical platform for sensitive and specific detection of cancer biomarkers.

  5. Optimization of highly nonlinear dispersion-flattened photonic crystal fiber for supercontinuum generation

    Institute of Scientific and Technical Information of China (English)

    Zhang Ya-Ni

    2013-01-01

    A simple type of photonic crystal fiber (PCF) for supercontinuum generation is proposed for the first time.The proposed PCF is composed of a solid silica core and a cladding with square lattice uniform elliptical air holes,which offers not only a large nonlinear coefficient but also a high birefringence and low leakage losses.The PCF with nonlinear coefficient as large as 46 W-1 · km-1 at the wavelength of 1.55 μm and a total dispersion as low as ±2.5 ps.nm-1 · km-1 over an ultra-broad waveband range of the S-C-L band (wavelength from 1.46 μm to 1.625 μm) is optimized by adjusting its structure parameter,such as the lattice constant A,the air-filling fraction f,and the air-hole ellipticity η.The novel PCF with ultra-flattened dispersion,highly nonlinear coefficient,and nearly zero negative dispersion slope will offer a possibility of efficient super-continuum generation in telecommunication windows using a few ps pulses.

  6. Low loss broadband transmission in hypocycloid-core Kagome hollow-core photonic crystal fiber.

    Science.gov (United States)

    Wang, Y Y; Wheeler, N V; Couny, F; Roberts, P J; Benabid, F

    2011-03-01

    We report on the fabrication of a seven-cell-core and three-ring-cladding large-pitch Kagome-lattice hollow-core photonic crystal fiber (HC-PCF) with a hypocycloid-shaped core structure. We demonstrate experimentally and theoretically that the design of this core shape enhances the coupling inhibition between the core and cladding modes and offers optical attenuation with a baseline of ∼180 dB/km over a transmission bandwidth larger than 200 THz. This loss figure rivals the state-of-the-art photonic bandgap HC-PCF while offering an approximately three times larger bandwidth and larger mode areas. Also, it beats the conventional circular-core-shaped Kagome HC-PCF in terms of the loss. The development of this novel (to our knowledge) HC-PCF has potential for a number of applications in which the combination of a large optical bandwidth and a low loss is a prerequisite.

  7. Heat Treatment of the Photonic Crystal Fiber

    Institute of Scientific and Technical Information of China (English)

    Joo; Beom; Eom; Seongwoo; Yoo; Jinchae; Kim; Hokyung; Kim; Un-Chul; Paek; Byeong; Ha; Lee

    2003-01-01

    We report heat treatment of the photonic crystal fiber. As the temperature was increased, the transmission of the photonic crystal fiber was increased, unlike conventional single mode fiber. The transmission increase at short wavelength region was larger than long wavelength region for the various temperatures. After crystallization of the silica glass, the spectra of the photonic crystal fiber were just decreased at all wavelength regions, but, in case of the single mode fiber, the absorption in visibl...

  8. Stabilized soliton self-frequency shift and 0.1- PHz sideband generation in a photonic-crystal fiber with an air-hole-modified core.

    Science.gov (United States)

    Liu, Bo-Wen; Hu, Ming-Lie; Fang, Xiao-Hui; Li, Yan-Feng; Chai, Lu; Wang, Ching-Yue; Tong, Weijun; Luo, Jie; Voronin, Aleksandr A; Zheltikov, Aleksei M

    2008-09-15

    Fiber dispersion and nonlinearity management strategy based on a modification of a photonic-crystal fiber (PCF) core with an air hole is shown to facilitate optimization of PCF components for a stable soliton frequency shift and subpetahertz sideband generation through four-wave mixing. Spectral recoil of an optical soliton by a red-shifted dispersive wave, generated through a soliton instability induced by high-order fiber dispersion, is shown to stabilize the soliton self-frequency shift in a highly nonlinear PCF with an air-hole-modified core relative to pump power variations. A fiber with a 2.3-microm-diameter core modified with a 0.9-microm-diameter air hole is used to demonstrate a robust soliton self-frequency shift of unamplified 50-fs Ti: sapphire laser pulses to a central wavelength of about 960 nm, which remains insensitive to variations in the pump pulse energy within the range from 60 to at least 100 pJ. In this regime of frequency shifting, intense high- and low-frequency branches of dispersive wave radiation are simultaneously observed in the spectrum of PCF output. An air-hole-modified-core PCF with appropriate dispersion and nonlinearity parameters is shown to provide efficient four-wave mixing, giving rise to Stokes and anti-Stokes sidebands whose frequency shift relative to the pump wavelength falls within the subpetahertz range, thus offering an attractive source for nonlinear Raman microspectroscopy.

  9. Broadly tunable femtosecond mid-infrared source based on dual photonic crystal fibers.

    Science.gov (United States)

    Yao, Yuhong; Knox, Wayne H

    2013-11-04

    We report a novel scheme of generating broadly tunable femtosecond mid-IR pulses based on difference frequency mixing the outputs from dual photonic crystal fibers (PCF). With a 1.3 W, 1035 nm, 300 fs and 40 MHz Yb fiber chirped pulse amplifier as the laser source, a PCF with single zero dispersion wavelength (ZDW) at the laser wavelength is employed to spectrally broaden a portion of the laser pulses. Facilitated by self-phase modulation, its output spectrum possesses two dominant outermost peaks that can be extended to 970 nm and 1092 nm. A different PCF with two closely spaced ZDWs around the laser wavelength is used to generate the intense Stokes pulses between 1240 - 1260 nm. Frequency mixing the dual PCFs outputs in an AgGaS(2) crystal results in mid-IR pulses broadly tunable from 4.2 μm to 9 μm with a maximum average power of 640 µW at 4.5 μm, corresponding to 16 pJ of pulse energy.

  10. PCF File Format.

    Energy Technology Data Exchange (ETDEWEB)

    Thoreson, Gregory G [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    PCF files are binary files designed to contain gamma spectra and neutron count rates from radiation sensors. It is the native format for the GAmma Detector Response and Analysis Software (GADRAS) package [1]. It can contain multiple spectra and information about each spectrum such as energy calibration. This document outlines the format of the file that would allow one to write a computer program to parse and write such files.

  11. Folded cladding porous shaped photonic crystal fiber with high sensitivity in optical sensing applications: Design and analysis

    Directory of Open Access Journals (Sweden)

    Bikash Kumar Paul

    2017-02-01

    Full Text Available A micro structure folded cladding porous shaped with circular air hole photonic crystal fiber (FP-PCF is proposed and numerically investigated in a broader wavelength range from 1.4 µm to 1.64 µm (E+S+C+L+U for chemical sensing purposes. Employing finite element method (FEM with anisotropic perfectly matched layer (PML various properties of the proposed FP-PCF are numerically inquired. Filling the hole of core with aqueous analyte ethanol (n = 1.354 and tuning different geometric parameters of the fiber, the sensitivity order of 64.19% and the confinement loss of 2.07 × 10-5 dB/m are attained at 1.48 µm wavelength in S band. The investigated numerical simulation result strongly focuses on sensing purposes; because this fiber attained higher sensitivity with lower confinement loss over the operating wavelength. Measuring time of sensitivity, simultaneously confinement loss also inquired. It reflects that confinement loss is highly dependable on PML depth but not for sensitivity. Beside above properties numerical aperture (NA, nonlinearity, and effective area are also computed. This FP-PCF also performed as sensor for other alcohol series (methanol, propanol, butanol, pentanol. Optimized FP-PCF shows higher sensitivity and low confinement loss carrying high impact in the area of chemical as well as gas sensing purposes. Surely it is clear that install such type of sensor will flourish technology massively.

  12. Analysis of liquid crystal properties for photonic crystal fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei;

    2009-01-01

    We analyze the bandgap structure of Liquid Crystal infiltrated Photonic Crystal Fibers depending on the parameters of the Liquid Crystals by means of finite element simulations. For a biased Liquid Crystal Photonic Crystal Fiber, we show how the tunability of the bandgap position depends on the L...

  13. Broadly wavelength- and pulse width-tunable high-repetition rate light pulses from soliton self-frequency shifting photonic crystal fiber integrated with a frequency doubling crystal.

    Science.gov (United States)

    Lanin, Aleksandr A; Fedotov, Andrei B; Zheltikov, Aleksei M

    2012-09-01

    Soliton self-frequency shift (SSFS) in a photonic crystal fiber (PCF) pumped by a long-cavity mode-locked Cr:forsterite laser is integrated with second harmonic generation (SHG) in a nonlinear crystal to generate ultrashort light pulses tunable within the range of wavelengths from 680 to 1800 nm at a repetition rate of 20 MHz. The pulse width of the second harmonic output is tuned from 70 to 600 fs by varying the thickness of the nonlinear crystal, beam-focusing geometry, and the wavelength of the soliton PCF output. Wavelength-tunable pulses generated through a combination of SSFS and SHG are ideally suited for coherent Raman microspectroscopy at high repetition rates, as verified by experiments on synthetic diamond and polystyrene films.

  14. Anti-Stokes Frequency Shift and Evolution in Polarization-Maintaining Photonic Crystal Fiber with Two-Zero Dispersion Wavelengths

    Institute of Scientific and Technical Information of China (English)

    WANG He-Lin; LENG Yu-Xin; XU Zhi-Zhan; QI Yi-Hong; HU Ming-Lie; WANG Ching-Yue

    2009-01-01

    Using the tunable pump pulses with about 100 fs pulse duration and 1064 nm central wavelength; the polarization-,wavelength- and power-dependent anti-Stokes lines are generated and modulated simultaneously in a polarizationmaintaining photonic crystal fiber (PM-PCF) with two zero-dispersion wavelengths.By accurately controlling the polarization directions,the wavelength and the power of the pump pulse in the fiber anomalous region close to the second zero-dispersion wavelength of the PM-PCF,the output anti-Stokes pulse spectra can be tuned between 563nm and 603 nm,which is in good agreement with the theoretical simulation.The color conversion of the mode image from yellow to orange is also observed with the different polarization pump pulses.These results can be attributed to the combined interaction between the fiber birefringence (including linear- and nonlinearbirefringence) and dispersion,and are attributed to phase-matching parametric four-wave mixing.

  15. Coherent broadband mid-infrared supercontinuum generation in As2Se3 photonic crystal fiber

    CERN Document Server

    Yuan, Wu

    2013-01-01

    The generation of fully coherent broadband mid-infrared (MIR) supercontinuum (SC) from 2.3 um to 8.3 um is demonstrated by using a 4.1 um pump and an As2Se3 photonic crystal fiber (PCF).By introducing the random quantum noise and the power instability on the input pulse and by numerically implementing the Young,s double slits experiment, we examine the coherence properties across the SC spectrum. It is found that the coherence of this MIR SC source depends strongly on the input pulse duration, the peak power, the power stability, and the zero-dispersion wavelength (ZDW) of the As2Se3 PCF.The optimal conditions for the MIR SC with a maximal coherent bandwidth are identified.

  16. Quantum Frequency Translation of Single-Photon States in Photonic Crystal Fiber

    CERN Document Server

    McGuinness, H J; McKinstrie, C J; Radic, S

    2010-01-01

    We experimentally demonstrate frequency translation of a nonclassical optical field via the Bragg scattering four-wave mixing process in a photonic crystal fiber (PCF). The high nonlinearity and the ability to control dispersion in PCF enable efficient translation between photon channels within the visible to-near-infrared spectral range, useful in quantum networks. Heralded single photons at 683 nm were translated to 659 nm with an efficiency of $28.6 \\pm 2.2$ percent. Second-order correlation measurements on the 683-nm and 659-nm fields yielded $g^{(2)}_{683}(0) = 0.21 \\pm 0.02$ and $g^{(2)}_{659}(0) = 0.19 \\pm 0.05$ respectively, showing the nonclassical nature of both fields.

  17. Highly non-linear solid core photonic crystal fiber with one nano hole

    Science.gov (United States)

    Gangwar, Rahul Kumar; Bhardwaj, Vanita; Singh, Vinod Kumar

    2015-08-01

    The numerical study of newly designed solid core photonic crystal fiber (SCPCF) having three hexagonal air hole rings in cladding region and one small nano hole at the center are presented. By using full vectorial finite element method (FV-FEM), we analyses the optical properties like effective area, nonlinearity and confinement loss of the proposed PCF. Results show that the change in core diameter controls the effective area, nonlinearity and confinement loss. A low effective area (3.34 µm2), high nonlinearity (36.34 W-1km-1) and low confinement loss (0.00106 dB/km) are achieved at the communication wavelength 1.55 µm for the SCPCF having core air hole diameter 0.10 µm, cladding air holes diameter 1.00 µm and pitch 2.50 µm. This type of PCF is very useful in non-linear applications such as supercontinuum generation, four wave mixing, second harmonic generation etc.

  18. Quantum frequency translation of single-photon states in a photonic crystal fiber.

    Science.gov (United States)

    McGuinness, H J; Raymer, M G; McKinstrie, C J; Radic, S

    2010-08-27

    We experimentally demonstrate frequency translation of a nonclassical optical field via four-wave mixing (Bragg-scattering process) in a photonic crystal fiber (PCF). The high nonlinearity and the ability to control dispersion in PCF enable efficient translation between nearby photon channels within the visible to-near-infrared spectral range, useful in quantum networks. Heralded single photons at 683 nm were translated to 659 nm with an efficiency of 28.6±2.2 percent. Second-order correlation measurements on the 683- and 659-nm fields yielded g(683)(2) (0)=0.21±0.02 and g(659)(2) (0)=0.19±0.05, respectively, showing the nonclassical nature of both fields.

  19. Wavelength conversion of a 40 Gb/s RZ-DPSK signal using four-wave mixing in a dispersion-flattened highly nonlinear photonic crystal fiber

    DEFF Research Database (Denmark)

    Andersen, Peter Andreas; Tokle, Torger; Geng, Yan

    2005-01-01

    by the gain bandwidth of erbium-doped fiber amplifiers, are obtained in only 50-m dispersion-flattened HNL-PCF with nonlinear coefficient equal to 11 W-1·km-1. This experiment demonstrates the potential of four-wave mixing in HNL-PCF as a modulation format and bit rate transparent wavelength conversion......Wavelength conversion of a 40-Gb/s return-to-zero differential phase-shift keying signal is demonstrated in a highly nonlinear photonic crystal fiber (HNL-PCF) for the first time. A conversion efficiency of -20 dB for a pump power of 23 dBm and a conversion bandwidth of 31 nm, essentially limited...

  20. Photonic crystal fiber modelling and applications

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Broeng, Jes; Libori, Stig E. Barkou

    2001-01-01

    Photonic crystal fibers having a microstructured air-silica cross section offer new optical properties compared to conventional fibers for telecommunication, sensor, and other applications. Recent advances within research and development of these fibers are presented.......Photonic crystal fibers having a microstructured air-silica cross section offer new optical properties compared to conventional fibers for telecommunication, sensor, and other applications. Recent advances within research and development of these fibers are presented....

  1. Photonic crystal fibers: fundamentals to emerging applications

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard

    2005-01-01

    A review of the fundamental properties of photonic crystal fibers is presented. Special focus is held on the emerging fields of application within areas such as actively controlled fiber devices and high-power fiber lasers.......A review of the fundamental properties of photonic crystal fibers is presented. Special focus is held on the emerging fields of application within areas such as actively controlled fiber devices and high-power fiber lasers....

  2. High-birefringent photonic crystal fiber

    DEFF Research Database (Denmark)

    Libori, Stig E. Barkou; Broeng, Jes; Knudsen, Erik

    2001-01-01

    A highly birefringent photonic crystal fiber design is analysed. Birefringence up to 10-3 is found. Random fluctuations in the cladding design are analysed, and the fiber is found to be a feasible polarization maintaining fiber.......A highly birefringent photonic crystal fiber design is analysed. Birefringence up to 10-3 is found. Random fluctuations in the cladding design are analysed, and the fiber is found to be a feasible polarization maintaining fiber....

  3. Molecular Spectroscopy in Hollow-Core Photonic Crystal Fiber at the 10 kHz Level

    Science.gov (United States)

    Wang, Chenchen; Knabe, Kevin; Wu, Shun; Lim, Jinkang; Tillman, Karl; Washburn, Brian; Corwin, Kristan; Wheeler, Natalie; Couny, Francois; Benabid, Fetah

    2010-03-01

    High-accuracy spectroscopy in hollow-core photonic crystal fiber (HC-PCF) is desirable for many applications, including frequency references and trace gas analysis. We demonstrate the narrowest sub-Doppler linewidths attained in HC-PCF using large-core kagome structured fiber. Such fibers can yield highly accurate frequency measurements that are about two orders of magnitude higher than previously reported. A fiber laser is locked to the ^12C2H2 ν1+ν3 P(13) transition inside kagome fiber, and compared with two optical frequency combs referenced to a GPS-disciplined Rb oscillator. The absolute frequency of the measured line center agrees with those measured in power build-up cavities to within 9.3 kHz (1 σ error). Approaches to further narrow the linewidths and improve systematic errors are investigated. The present system thus combines accuracy approaching that of power build-up cavities with the potential to be compact, robust, and integrated into an all-fiber system for a portable near-infrared frequency reference. Supported by AFOSR FA9950-05-1-0304 and NSF ECS-0449295.

  4. Modification of inner surface of photonic crystal fibers with self-assembled polyaniline films

    Science.gov (United States)

    Pidenko, Sergei A.; Pidenko, Pavel S.; Bondarenko, Sergei D.; Shuvalov, Andrei A.; Burmistrova, Natalia A.; Goryacheva, Irina Y.

    2016-04-01

    Photonic crystal fibers (PCFs) with a hollow core are one of the most promising solid support of fiber-optic sensors. The main advantages of PCF as sensor elements in clinical analysis are minimization of optical interactions from the sample and the ability to analyze small volume of samples. At the same time, low sorption capacity of glass which is the basic material for the fabrication of the PCF, limits their use in the development of biosensors. Modification of the inner surface of the PCF can be the solution of the problem. In this work the synthesis of self-assembled films of polyaniline (PANI) on the inner surface of the PCFs was carried out. The modified PCFs were studied by spectroscopy and electron microscopy. It was found that the covering of the inner surface of the PCFs with PANI leads to a shift of the local maximums of the transmission spectrum PCFs up to 25 nm. These makes possible to design the method of varying of photonic bandgaps location.

  5. Polarization-dependent intermodal four-wave mixing in a birefringent multimode photonic crystal fiber.

    Science.gov (United States)

    Yuan, Jinhui; Kang, Zhe; Li, Feng; Zhou, Guiyao; Sang, Xinzhu; Wu, Qiang; Yan, Binbin; Zhou, Xian; Zhong, Kangping; Wang, Liang; Wang, Kuiru; Yu, Chongxiu; Lu, Chao; Tam, Hwa Yaw; Wai, P K A

    2017-05-01

    In this Letter, polarization-dependent intermodal four-wave mixing (FWM) is demonstrated experimentally in a birefringent multimode photonic crystal fiber (BM-PCF) designed and fabricated in-house. Femtosecond pump pulses at wavelengths ∼800  nm polarized along one of the principal axes of the BM-PCF are coupled into a normal dispersion region away from the zero-dispersion wavelengths of the fundamental guided mode of the BM-PCF. Anti-Stokes and Stokes waves are generated in the 2nd guided mode at visible and near-infrared wavelengths, respectively. For pump pulses at an average input power of 500 mW polarized along the slow axis, the conversion efficiencies ηas and ηs of the anti-Stokes and Stokes waves generated at wavelengths 579.7 and 1290.4 nm are 19% and 14%, respectively. For pump pulses polarized along the fast axis, the corresponding ηas and ηs at 530.4 and 1627 nm are 23% and 18%, respectively. We also observed that fiber bending and intermodal walk-off have a small effect on the polarization-dependent intermodal FWM-based frequency conversion process.

  6. Four-wave mixing based widely tunable wavelength conversion using 1-m dispersion-shifted bismuth-oxide photonic crystal fiber.

    Science.gov (United States)

    Chow, K K; Kikuchi, K; Nagashima, T; Hasegawa, T; Ohara, S; Sugimoto, N

    2007-11-12

    We demonstrate widely tunable wavelength conversion based on four-wave mixing using a dispersion-shifted bismuth-oxide photonic crystal fiber (Bi-PCF). A 1-meter-long Bi-PCF is used as the nonlinear medium for wavelength conversion of a 10 Gb/s non-return-to-zero (NRZ) signal. A 3- dB working range of the converted signal over 35 nm is obtained with around 1-dB power penalty in the bit-error-rate measurements.

  7. To optimize splice joint between different PCF-based devices and SMF transmission medium

    Institute of Scientific and Technical Information of China (English)

    Faramarz E. Seraji; S. Farsinezhad

    2009-01-01

    An analysis of splice loss between photonic crystal fibers (PCFs) and conventional single-mode fibers (SMFs) is presented at bending and straight conditions, by using scalar effective index method (SEIM), vectorial effective index method (VEIM), and finite-difference frequency domain (FDFD) methods. It is shown that when there is a slight bending at the vicinity of splice joint, the spot size increases sharply at higher frequencies. On the basis of the obtained results, a mechanism to optimize the splice loss between PCFs and conventional SMFs, both with any geometry, is suggested. The results can be utilized for PCF-based devices to be jointed to SMF as a transmission medium.

  8. Experimental study of supercontinuum generation in an amplifier based on an Yb3+ doped nonlinear photonic crystal fiber

    Science.gov (United States)

    Baselt, Tobias; Taudt, Christopher; Nelsen, Bryan; Lasagni, Andrés. Fabián.; Hartmann, Peter

    2016-03-01

    The use of supercontinuum light sources in different optical measurement methods, like microscopy or optical coherence tomography, has increased significantly compared to classical wideband light sources. The development of various optical measurement techniques benefits from the high brightness and bandwidth, as well as the spatial coherence of these sources. For some applications, only a portion of the broad spectral range can be used. Therefore, an increase of the spectral power density in limited spectral regions would provide a clear advantage over spectral filtering. This study describes a method to increase the spectral power density of supercontinuum sources by amplifying the excitation wavelength inside a nonlinear photonic crystal fiber (PCF). An ytterbium doped photonic crystal fiber was manufactured by a sol-gel process and used in a fiber amplifier setup as the nonlinear fiber medium. In order to characterize the fiber's optimum operational characteristics, group-velocity dispersion (GVD) measurements were performed on the fiber during the amplification process. For this purpose, a notch-pass mirror was used to launch the radiation of a stabilized laser diode at 976 nm into the fiber sample for pumping. The performance of the fiber was compared with a conventional PCF. Finally, the system as a whole was characterized in reference to common solid state-laser-based photonic supercontinuum light sources. An improvement of the power density up to 7.2 times was observed between 1100 nm to 1380 nm wavelengths.

  9. Numerical analysis of a photonic crystal fiber based on a surface plasmon resonance sensor with an annular analyte channel

    Science.gov (United States)

    Liu, Chao; Yang, Lin; Su, Weiquan; Wang, Famei; Sun, Tao; Liu, Qiang; Mu, Haiwei; Chu, Paul K.

    2017-01-01

    A sensing structure is designed with a photonic crystal fiber based on a surface plasmon resonance (PCF-SPR) sensor using gold as the sensitive material. The benefit of the structure is to reduce the difficulty in gold deposition, because the Au film is deposited on the outside of the fiber core instead of on the holes filled with analyte inside the core. The properties of the sensor are numerically calculated by the finite element method. The results show that the thickness of the gold film, refractive index of the analyte, and radius of the central hole affect the sensing performance of the PCF-SPR. By optimizing the model, an extra graphene layer with the thickness of 20 nm is deposited on the gold film in the model. The maximum spectral sensitivity can be as high as 7500 nm/RIU for the sensor with the gold-graphene composite film as the sensitive material.

  10. Zero-velocity solitons in high-index photonic crystal fibers

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper

    2011-01-01

    -light modes in a solid core chalcogenide PCF are used to parameterize the model, which is shown to support standing and moving spatial solitons. Inclusion of Raman scattering slows down moving solitons exponentially, so that the zero-velocity soliton becomes an attractor state. An analytical expression......Nonlinear propagation in slow-light states of high-index photonic crystal fibers (PCFs) is studied numerically. To avoid divergencies in dispersion and nonlinear parameters around the zero-velocity mode, a time-propagating generalized nonlinear Schrödinger equation is formulated. Calculated slow...

  11. Cladded single crystal fibers for high power fiber lasers

    Science.gov (United States)

    Kim, W.; Shaw, B.; Bayya, S.; Askins, C.; Peele, J.; Rhonehouse, D.; Meyers, J.; Thapa, R.; Gibson, D.; Sanghera, J.

    2016-09-01

    We report on the recent progress in the development of cladded single crystal fibers for high power single frequency lasers. Various rare earth doped single crystal YAG fibers with diameters down to 17 μm with length > 1 m have been successfully drawn using a state-of-the-art Laser Heated Pedestal Growth system. Single and double cladding on rare earth doped YAG fibers have been developed using glasses where optical and physical properties were precisely matched to doped YAG core single crystal fiber. The double clad Yb:YAG fiber structures have dimensions analogous to large mode area (LMA) silica fiber. We also report successful fabrications of all crystalline core/clad fibers where thermal and optical properties are superior over glass cladded YAG fibers. Various fabrication methods, optical characterization and gain measurements on these cladded YAG fibers are reported.

  12. Generation of a compact high-power high-efficiency normal-dispersion pumping supercontinuum in silica photonic crystal fiber pumped with a 1064-nm picosecond pulse

    Science.gov (United States)

    Chen, Hong-Wei; Jin, Ai-Jun; Yang, Wei-Qiang; Chen, Sheng-Ping; Hou, Jing; Lu, Qi-Sheng

    2013-06-01

    Broadband normal dispersion pumping supercontinuum (SC) generation in silica photonic crystal fiber (PCF) is investigated in this paper. A 1064-nm picosecond fiber laser is used to pump silica PCF for the SC generation. The length of PCF is optimized for the most efficient stimulated Raman scattering process in the picosecond pump pulse region. The first stimulated Raman Stokes peak is located in the anomalous dispersion regime of the PCF and near the zero dispersion wavelength; thus the SC generation process can benefit from both a normal dispersion pumping scheme and an anomalous dispersion pumping scheme. The 51.7-W SC spanning from about 700 nm to beyond 1700 nm is generated with an all-fiber configuration, and the pump-to-SC conversion efficiency is up to 90%. In order to avoid the output fiber end face damage and increase the stability of the system, an improved output solution for the high power SC is proposed in our experiment. This high-efficiency near-infrared SC source is very suitable for applications in which average output power and spectral power density are firstly desirable.

  13. Generation of a compact high-power high-efficiency normal-dispersion pumping supercontinuum in silica photonic crystal fiber pumped with a 1064-nm picosecond pulse

    Institute of Scientific and Technical Information of China (English)

    Chen Hong-Wei; Jin Ai-Jun; Yang Wei-Qiang; Chen Sheng-Ping; Hou Jing; Lu Qi-Sheng

    2013-01-01

    Broadband normal dispersion pumping supercontinuum (SC) generation in silica photonic crystal fiber (PCF) is investigated in this paper.A 1064-nm picosecond fiber laser is used to pump silica PCF for the SC generation.The length of PCF is optimized for the most efficient stimulated Raman scattering process in the picosecond pump pulse region.The first stimulated Raman Stokes peak is located in the anomalous dispersion regime of the PCF and near the zero dispersion wavelength; thus the SC generation process can benefit from both a normal dispersion pumping scheme and an anomalous dispersion pumping scheme.The 51.7-W SC spanning from about 700 nm to beyond 1700 nm is generated with an all-fiber configuration,and the pump-to-SC conversion efficiency is up to 90%.In order to avoid the output fiber end face damage and increase the stability of the system,an improved output solution for the high power SC is proposed in our experiment.This high-efficiency near-infrared SC source is very suitable for applications in which average output power and spectral power density are firstly desirable.

  14. A frequency-stabilized laser based on a hollow-core photonic crystal fiber CO2 gas cell and its application scheme

    Science.gov (United States)

    Chen, Ze-Heng; Yang, Fei; Chen, Di-Jun; Cai, Hai-Wen

    2017-04-01

    A frequency-stabilized laser system based on a hollow-core photonic crystal fiber (HC-PCF) CO2 gas cell for the space-borne CO2 light detection and ranging (LIDAR) is proposed. This system will help realize precise measurement of the global atmospheric CO2 concentrations. The relation between the frequency stability and the temperature of the HC-PCF cell was studied in detail. It is proved that accurate control of the temperature of the HC-PCF cell is very important to realize high stability of the proposed system. The laser is locked to CO2 gas R18 absorption line at 1572.0179 nm, and its peak-to-peak frequency stability is approximately 485 kHz, satisfying the requirements for the integrated path differential absorption system for CO2 measurement with an accuracy of  <1 ppm over 5 h.

  15. TAILORING OF FLATTENED DISPERSION IN TRIANGULAR-LATTICE PHOTONIC CRYSTAL FIBER

    Directory of Open Access Journals (Sweden)

    Sandhir Kumar Singh

    2011-12-01

    Full Text Available The interest of researchers and engineers in several laboratories, since the1980s, has been attracted by the ability to structure materials on the scale of the optical wavelength, a fraction of micrometers or less, in order to develop new optical medium, known as photonic crystals . Photonic crystals rely on a regular morphological microstructure of air-holes, incorporated into the material, which radically alters its optical properties. In Photonic Crystal Fiber (PCF it is possible to realize flat dispersion over a wide wavelength range that cannot be realized with a conventional single-mode fiber. In PCFs, the dispersion can be controlled and tailored with unprecedented freedom. In fact, due to the high refractive index difference between silica and air, and to the flexibility of changing air-hole sizes and patterns, the waveguide contribution to the dispersion parameter can be significantly changed, thus obtaining unusual position of the zero dispersion wavelength, as well as particular values of the dispersion curve slope. In particular, by manipulating the air- hole radius or the lattice period of the micro structured cladding, it is possible to control the zero-dispersion wavelength, which can be tuned over a very wide range, or the dispersion curves, which can be engineered to be ultra flattened. In this paper the geometric parameters of triangular PCF have been properly changed to optimize the dispersion compensation over a wide wavelength range.

  16. Long-distance laser propulsion and deformation- monitoring of cells in optofluidic photonic crystal fiber.

    Science.gov (United States)

    Unterkofler, Sarah; Garbos, Martin K; Euser, Tijmen G; St J Russell, Philip

    2013-09-01

    We introduce a unique method for laser-propelling individual cells over distances of 10s of cm through stationary liquid in a microfluidic channel. This is achieved by using liquid-filled hollow-core photonic crystal fiber (HC-PCF). HC-PCF provides low-loss light guidance in a well-defined single mode, resulting in highly uniform optical trapping and propulsive forces in the core which at the same time acts as a microfluidic channel. Cells are trapped laterally at the center of the core, typically several microns away from the glass interface, which eliminates adherence effects and external perturbations. During propagation, the velocity of the cells is conveniently monitored using a non-imaging Doppler velocimetry technique. Dynamic changes in velocity at constant optical powers up to 350 mW indicate stress-induced changes in the shape of the cells, which is confirmed by bright-field microscopy. Our results suggest that HC-PCF will be useful as a new tool for the study of single-cell biomechanics.

  17. Surface Plasmon Resonance Temperature Sensor Based on Photonic Crystal Fibers Randomly Filled with Silver Nanowires

    Directory of Open Access Journals (Sweden)

    Nannan Luan

    2014-08-01

    Full Text Available We propose a temperature sensor design based on surface plasmon resonances (SPRs supported by filling the holes of a six-hole photonic crystal fiber (PCF with a silver nanowire. A liquid mixture (ethanol and chloroform with a large thermo-optic coefficient is filled into the PCF holes as sensing medium. The filled silver nanowires can support resonance peaks and the peak will shift when temperature variations induce changes in the refractive indices of the mixture. By measuring the peak shift, the temperature change can be detected. The resonance peak is extremely sensitive to temperature because the refractive index of the filled mixture is close to that of the PCF material. Our numerical results indicate that a temperature sensitivity as high as 4 nm/K can be achieved and that the most sensitive range of the sensor can be tuned by changing the volume ratios of ethanol and chloroform. Moreover, the maximal sensitivity is relatively stable with random filled nanowires, which will be very convenient for the sensor fabrication.

  18. Characteristics of Highly Birefringent Photonic Crystal Fiber with Defected Core and Equilateral Pentagon Architecture

    Directory of Open Access Journals (Sweden)

    Fei Yu

    2016-01-01

    Full Text Available A novel high birefringence and nearly zero dispersion-flattened photonic crystal fiber (PCF with elliptical defected core (E-DC and equilateral pentagonal architecture is designed. By applying the full-vector finite element method (FEM, the characteristics of electric field distribution, birefringence, and chromatic dispersion of the proposed E-DC PCF are numerically investigated in detail. The simulation results reveal that the proposed PCF can realize high birefringence, ranging from 10-3 to 10-2 orders of magnitude, owing to the embedded elliptical air hole in the core center. However, the existence of the elliptical air hole gives rise to an extraordinary electric field distribution, where a V-shaped notch appears and the size of the V-shaped notch varies at different operating wavelengths. Also, the mode field diameter is estimated to be about 2 μm, which implies the small effective mode area and highly nonlinear coefficient. Furthermore, the investigation of the chromatic dispersion characteristic shows that the introduction of the elliptical air hole is helpful to control the chromatic dispersion to be negative or nearly zero flattened over a wide wavelength bandwidth.

  19. Comparison of different methods for rigorous modeling of photonic crystal fibers.

    Science.gov (United States)

    Szpulak, Marcin; Urbanczyk, Waclaw; Serebryannikov, Evgenii; Zheltikov, Aleksei; Hochman, Amit; Leviatan, Yehuda; Kotynski, Rafal; Panajotov, Krassimir

    2006-06-12

    We present a summary of the simulation exercise carried out within the EC Cost Action P11 on the rigorous modeling of photonic crystal fiber (PCF) with an elliptically deformed core and noncircular air holes with a high fill factor. The aim of the exercise is to calculate using different numerical methods and to compare several fiber characteristics, such as the spectral dependence of the phase and the group effective indices, the birefringence, the group velocity dispersion and the confinement losses. The simulations are performed using four rigorous approaches: the finite element method (FEM), the source model technique (SMT), the plane wave method (PWM), and the localized function method (LFM). Furthermore, we consider a simplified equivalent fiber method (EFM), in which the real structure of the holey fiber is replaced by an equivalent step index waveguide composed of an elliptical glass core surrounded by air cladding. All these methods are shown to converge well and to provide highly consistent estimations of the PCF characteristics. Qualitative arguments based on the general properties of the wave equation are applied to explain the physical mechanisms one can utilize to tailor the propagation characteristics of nonlinear PCFs.

  20. A fusion-spliced near-field optical fiber probe using photonic crystal fiber for nanoscale thermometry based on fluorescence-lifetime measurement of quantum dots.

    Science.gov (United States)

    Fujii, Takuro; Taguchi, Yoshihiro; Saiki, Toshiharu; Nagasaka, Yuji

    2011-01-01

    We have developed a novel nanoscale temperature-measurement method using fluorescence in the near-field called fluorescence near-field optics thermal nanoscopy (Fluor-NOTN). Fluor-NOTN enables the temperature distributions of nanoscale materials to be measured in vivo/in situ. The proposed method measures temperature by detecting the temperature dependent fluorescence lifetimes of Cd/Se quantum dots (QDs). For a high-sensitivity temperature measurement, the auto-fluorescence generated from a fiber probe should be reduced. In order to decrease the noise, we have fabricated a novel near-field optical-fiber probe by fusion-splicing a photonic crystal fiber (PCF) and a conventional single-mode fiber (SMF). The validity of the novel fiber probe was assessed experimentally by evaluating the auto-fluorescence spectra of the PCF. Due to the decrease of auto-fluorescence, a six- to ten-fold increase of S/N in the near-field fluorescence lifetime detection was achieved with the newly fabricated fusion-spliced near-field optical fiber probe. Additionally, the near-field fluorescence lifetime of the quantum dots was successfully measured by the fabricated fusion-spliced near-field optical fiber probe at room temperature, and was estimated to be 10.0 ns.

  1. A Fusion-Spliced Near-Field Optical Fiber Probe Using Photonic Crystal Fiber for Nanoscale Thermometry Based on Fluorescence-Lifetime Measurement of Quantum Dots

    Directory of Open Access Journals (Sweden)

    Toshiharu Saiki

    2011-08-01

    Full Text Available We have developed a novel nanoscale temperature-measurement method using fluorescence in the near-field called Fluorescence Near-field Optics Thermal Nanoscopy (Fluor-NOTN. Fluor-NOTN enables the temperature distributions of nanoscale materials to be measured in vivo/in situ. The proposed method measures temperature by detecting the temperature dependent fluorescence lifetimes of Cd/Se Quantum Dots (QDs. For a high-sensitivity temperature measurement, the auto-fluorescence generated from a fiber probe should be reduced. In order to decrease the noise, we have fabricated a novel near-field optical-fiber probe by fusion-splicing a photonic crystal fiber (PCF and a conventional single-mode fiber (SMF. The validity of the novel fiber probe was assessed experimentally by evaluating the auto-fluorescence spectra of the PCF. Due to the decrease of auto-fluorescence, a six- to ten-fold increase of S/N in the near-field fluorescence lifetime detection was achieved with the newly fabricated fusion-spliced near-field optical fiber probe. Additionally, the near-field fluorescence lifetime of the quantum dots was successfully measured by the fabricated fusion-spliced near-field optical fiber probe at room temperature, and was estimated to be 10.0 ns.

  2. A Novel Low-Loss Diamond-Core Porous Fiber for Polarization Maintaining Terahertz Transmission

    DEFF Research Database (Denmark)

    Islam, Raonaqul; Habib, Selim; Hasanuzzaman, G. K. M.;

    2016-01-01

    We report on the numerical design optimization of a new kind of relatively simple porous-core photonic crystal fiber (PCF) for terahertz (THz) waveguiding. A novel twist is introduced in the regular hexagonal PCF by including a diamond-shaped porous-core inside the hexagonal cladding. The numerical...

  3. Biased liquid crystal photonic bandgap fiber

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2008-01-01

    We simulate the director structure of all capillaries in a biased photonic crystal fiber infiltrated with liquid crystals. Various mode simulations for different capillaries show the necessity to consider the entire structure.......We simulate the director structure of all capillaries in a biased photonic crystal fiber infiltrated with liquid crystals. Various mode simulations for different capillaries show the necessity to consider the entire structure....

  4. Photonic nanojet focusing for hollow-core photonic crystal fiber probes.

    Science.gov (United States)

    Ghenuche, Petru; Rigneault, Hervé; Wenger, Jérôme

    2012-12-20

    Large-pitch kagome-lattice hollow-core photonic crystal fibers (HC-PCFs) offer appealing optical properties for beam delivery and remote sensing. However, focusing their optical mode on a submicrometer spot can be challenging due to the large mode diameter and low numerical aperture of these fibers. Here, we demonstrate that a 30 μm latex microsphere directly set at the HC-PCF end-face provides an efficient means to focus the fiber mode down to a spot of 540 nm full width at half-maximum thanks to a photonic nanojet effect. The system is used for fluorescence imaging and direct laser writing on a thin absorbing layer. Potential applications include inspection of semiconductor wafers, photolithography, laser surgery, fluorescence sensing, or optical transfection.

  5. Surface plasmon resonance sensor based on polymer photonic crystal fibers with metal nanolayers.

    Science.gov (United States)

    Lu, Ying; Hao, Cong-Jing; Wu, Bao-Qun; Musideke, Mayilamu; Duan, Liang-Cheng; Wen, Wu-Qi; Yao, Jian-Quan

    2013-01-15

    A large-mode-area polymer photonic crystal fiber made of polymethyl methacrylate with the cladding having only one layer of air holes near the edge of the fiber is designed and proposed to be used in surface plasmon resonance sensors. In such sensor, a nanoscale metal film and analyte can be deposited on the outer side of the fiber instead of coating or filling in the holes of the conventional PCF, which make the real time detection with high sensitivity easily to realize. Moreover, it is relatively stable to changes of the amount and the diameter of air holes, which is very beneficial for sensor fabrication and sensing applications. Numerical simulation results show that under the conditions of the similar spectral and intensity sensitivity of 8.3 × 10(-5)-9.4 × 10(-5) RIU, the confinement loss can be increased dramatically.

  6. Surface Plasmon Resonance Sensor Based on Polymer Photonic Crystal Fibers with Metal Nanolayers

    Directory of Open Access Journals (Sweden)

    Jian-Quan Yao

    2013-01-01

    Full Text Available A large-mode-area polymer photonic crystal fiber made of polymethyl methacrylate with the cladding having only one layer of air holes near the edge of the fiber is designed and proposed to be used in surface plasmon resonance sensors. In such sensor, a nanoscale metal film and analyte can be deposited on the outer side of the fiber instead of coating or filling in the holes of the conventional PCF, which make the real time detection with high sensitivity easily to realize. Moreover, it is relatively stable to changes of the amount and the diameter of air holes, which is very beneficial for sensor fabrication and sensing applications. Numerical simulation results show that under the conditions of the similar spectral and intensity sensitivity of 8.3 × 10−5–9.4 × 10−5 RIU, the confinement loss can be increased dramatically.

  7. Beam delivery and pulse compression to sub-50 fs of a modelocked thin-disk laser in a gas-filled Kagome-type HC-PCF fiber.

    Science.gov (United States)

    Emaury, Florian; Dutin, Coralie Fourcade; Saraceno, Clara J; Trant, Mathis; Heckl, Oliver H; Wang, Yang Y; Schriber, Cinia; Gerome, Frederic; Südmeyer, Thomas; Benabid, Fetah; Keller, Ursula

    2013-02-25

    We present two experiments confirming that hypocycloid Kagome-type hollow-core photonic crystal fibers (HC-PCFs) are excellent candidates for beam delivery of MW peak powers and pulse compression down to the sub-50 fs regime. We demonstrate temporal pulse compression of a 1030-nm Yb:YAG thin disk laser providing 860 fs, 1.9 µJ pulses at 3.9 MHz. Using a single-pass grating pulse compressor, we obtained a pulse duration of 48 fs (FWHM), a spectral bandwidth of 58 nm, and an average output power of 4.2 W with an overall power efficiency into the final polarized compressed pulse of 56%. The pulse energy was 1.1 µJ. This corresponds to a peak power of more than 10 MW and a compression factor of 18 taking into account the exact temporal pulse profile measured with a SHG FROG. The compressed pulses were close to the transform limit of 44 fs. Moreover, we present transmission of up to 97 µJ pulses at 10.5 ps through 10-cm long fiber, corresponding to more than twice the critical peak power for self-focusing in silica.

  8. Photonics crystal fiber Raman sensors

    Science.gov (United States)

    Yang, Xuan; Bond, Tiziana C.; Zhang, Jin Z.; Li, Yat; Gu, Claire

    2012-11-01

    Hollow core photonic crystal fiber (HCPCF) employs a guiding mechanism fundamentally different from that in conventional index guiding fibers. In an HCPCF, periodic air channels in a glass matrix act as reflectors to confine light in an empty core. As a result, the interaction between light and glass can be very small. Therefore, HCPCF has been used in applications that require extremely low non-linearity, high breakdown threshold, and zero dispersion. However, their applications in optical sensing, especially in chemical and biological sensing, have only been extensively explored recently. Besides their well-recognized optical properties the hollow cores of the fibers can be easily filled with liquid or gas, providing an ideal sampling mechanism in sensors. Recently, we have demonstrated that by filling up a HCPCF with gas or liquid samples, it is possible to significantly increase the sensitivity of the sensors in either regular Raman or surface enhanced Raman scattering (SERS) applications. This is because the confinement of both light and sample inside the hollow core enables direct interaction between the propagating wave and the analyte. In this paper, we report our recent work on using HCPCF as a platform for Raman or SERS in the detection of low concentration greenhouse gas (ambient CO2), biomedically significant molecules (e.g., glucose), and bacteria. We have demonstrated that by filling up a HCPCF with gas or liquid samples, it is possible to significantly increase the sensitivity of the sensors in either regular Raman or SERS applications.

  9. Bending characteristics of dual-hole PM-PCF based on LP01 and LP11 modal interference

    Science.gov (United States)

    Guo, Xuan; Liu, Feng; Gao, Meng-yuan; Tan, Ai-ling; Fu, Xing-hu; Bi, Wei-hong

    2016-03-01

    The bending characteristics of dual-hole polarization maintaining photonic crystal fiber (PM-PCF) are demonstrated in this paper. The modal interference is induced by the LP01 mode and LP11 mode propagating in a single PM-PCF with the same polarization direction. Simulation results demonstrate that the bending radius induces the phase difference between LP01 mode and LP11 mode, which leads to the change of light interference intensity on the fiber output facet. The relationship between bending radius and normalized interference intensity with three different bending angles is discussed, where the bending angle is defined as the angle between hole axis and the x axis. The bending sensitivity is obtained to be about -188.78/m around the bending radius of 1.5 cm with the bending angle of 90°. The bending characteristics can contribute for online bending detection in widespread areas.

  10. Photonic crystal fiber based antibody detection

    OpenAIRE

    Duval, A.; Lhoutellier, M; Jensen, J. B.; Hoiby, P E; Missier, V; Pedersen, L. H.; Hansen, Theis Peter; Bjarklev, Anders Overgaard; Bang, Ole

    2004-01-01

    An original approach for detecting labeled antibodies based on strong penetration photonic crystal fibers is introduced. The target antibody is immobilized inside the air-holes of a photonic crystal fiber and the detection is realized by the means of evanescent-wave fluorescence spectroscopy and the use of a transversal illumination setup.

  11. Photonic crystal fiber based antibody detection

    DEFF Research Database (Denmark)

    Duval, A; Lhoutellier, M; Jensen, J B

    2004-01-01

    An original approach for detecting labeled antibodies based on strong penetration photonic crystal fibers is introduced. The target antibody is immobilized inside the air-holes of a photonic crystal fiber and the detection is realized by the means of evanescent-wave fluorescence spectroscopy and ...

  12. Enhanced two photon fluorescence microfluidic sensor based on dual cladding photonic-crystal fiber

    Science.gov (United States)

    Amitonova, Lyubov; Fedotov, Ilya; Fedotov, Andrey; Zheltikov, Aleksei

    2012-11-01

    The architecture of photonic-crystal fibers (PCFs) suggests a variety of strategies for optical sensing. A combination of TPA approaches with capabilities of fiber-optic probes offers numerous advantages, suggesting a convenient format for beam delivery, facilitating manipulation of excitation radiation, and allowing this excitation to be applied locally and selectively. In this work, we show that a PCF with a special design can realize different protocols of optical sensing, simultaneously serving, whenever necessary, for the collection and on-line monitoring of liquid-phase samples. Specially designed PCF is shown to substantially increase the guided-wave luminescent response from molecules excited through two-photon absorption (TPA) by femtosecond near-infrared laser pulses. Biophotonic implications of this waveguide TPL-response enhancement include fiber-format solutions for online monitoring of drug delivery and drug activation, interrogation of neural activity, biosensing, endoscopy, and locally controlled singlet oxygen generation in photodynamic therapy. This work was supported by the Russian Foundation for Basic Research, project 11-04-12185-ofi-m.

  13. Defected-core photonic crystal fiber magnetic field sensor based on Sagnac interferometer

    Science.gov (United States)

    Liu, Qiang; Li, Shuguang; Dou, Chao; Wang, Xinyu

    2017-03-01

    A high-sensitivity magnetic field sensor based on photonic crystal fiber (PCF) Sagnac interferometer is proposed by finite element method (FEM). The elliptical-hole PCF is injected with water-based magnetic fluid. The fiber core is introduced in an elliptical hole to act as a defected core. The sensitivities are 13.25 and -14.32 nm/Oe at the wavelength of 1750 and 1780 nm, respectively, as the magnetic field H is 100 Oe. The simulation result shows that the sensitivity is extremely high near the wavelength of 1765 nm, because the group birefringence Bg is about zero at that wavelength. The above theory is examined in a different configuration by the transmission mode. The average sensitivities are 0.265, 1.63 and -1.915 nm/Oe, respectively, for the dip wavelength A, B and C as the fiber length is 5 cm. The detecting window is 60Oe. We also demonstrate that the sensitivity can be greatly enhanced by 1-2 orders of magnitude by introducing a defected core.

  14. A Raman cell based on hollow core photonic crystal fiber for human breath analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chow, Kam Kong; Zeng, Haishan, E-mail: hzeng@bccrc.ca [Imaging Unit – Integrative Oncology Department, British Columbia Cancer Agency Research Centre, 675 West 10th Avenue, Vancouver, British Columbia V5Z 1L3, Canada and Medical Physics Program – Department of Physics and Astronomy, University of British Columbia, 6224 Agricultural Road, Vancouver, British Columbia V6T 1Z1 (Canada); Short, Michael; Lam, Stephen; McWilliams, Annette [Imaging Unit – Integrative Oncology Department, British Columbia Cancer Agency Research Centre, 675 West 10th Avenue, Vancouver, British Columbia V5Z 1L3 (Canada)

    2014-09-15

    Purpose: Breath analysis has a potential prospect to benefit the medical field based on its perceived advantages to become a point-of-care, easy to use, and cost-effective technology. Early studies done by mass spectrometry show that volatile organic compounds from human breath can represent certain disease states of our bodies, such as lung cancer, and revealed the potential of breath analysis. But mass spectrometry is costly and has slow-turnaround time. The authors’ goal is to develop a more portable and cost effective device based on Raman spectroscopy and hollow core-photonic crystal fiber (HC-PCF) for breath analysis. Methods: Raman scattering is a photon-molecular interaction based on the kinetic modes of an analyte which offers unique fingerprint type signals that allow molecular identification. HC-PCF is a novel light guide which allows light to be confined in a hollow core and it can be filled with a gaseous sample. Raman signals generated by the gaseous sample (i.e., human breath) can be guided and collected effectively for spectral analysis. Results: A Raman-cell based on HC-PCF in the near infrared wavelength range was developed and tested in a single pass forward-scattering mode for different gaseous samples. Raman spectra were obtained successfully from reference gases (hydrogen, oxygen, carbon dioxide gases), ambient air, and a human breath sample. The calculated minimum detectable concentration of this system was ∼15 parts per million by volume, determined by measuring the carbon dioxide concentration in ambient air via the characteristic Raman peaks at 1286 and 1388 cm{sup −1}. Conclusions: The results of this study were compared to a previous study using HC-PCF to trap industrial gases and backward-scatter 514.5 nm light from them. The authors found that the method presented in this paper has an advantage to enhance the signal-to-noise ratio (SNR). This SNR advantage, coupled with the better transmission of HC-PCF in the near-IR than in the

  15. Designing the Mode solving of the photonic crystal fiber via BPM and Exploring the Single-Mode Properties

    CERN Document Server

    Debbal, Mohammed

    2012-01-01

    Microstructured optical fibers (MOFs) are one of the most exciting recent developments in fiber optics. A MOF usually consists of a hexagonal arrangement of air holes running down the length of a silica fiber surrounding a central core of solid silica or, in some cases air. MOFs can exhibit a number of unique properties, including zero dispersion at visible wavelengths and low or high effective nonlinearity [3]-[17], By varying the size of the holes and their number and position, one can also design MOFs with carefully controlled dispersive and modal properties. In this paper, we analyze and modeling the behavior of the photonic crystal fiber (PCF) by using in the first step a propagator method based on the BPM method. With our BPM software, the electric field contour of the fundamental mode of PCF was demonstrated. We also used it to see the variation of the effective index; an effective index model confirms that such a fiber can be single mode for any wavelength. It would make a study of photonic crystal fi...

  16. Fiber Sagnac interferometer based on a liquid-filled photonic crystal fiber for temperature sensing

    Science.gov (United States)

    Liu, Qiang; Li, Shu-Guang; Shi, Min

    2016-12-01

    A fiber Sagnac interferometer based on the square-lattice photonic crystal fiber (PCF) for temperature sensing is designed. All the air holes are assumed to be filled with temperature sensitive liquid. The temperature sensing characteristics are analyzed by finite element method (FEM). The phase birefringence B, the group birefringence Bg, and the sensitivity dependence on the operable wavelength λ are studied, and the temperature varies from 25 °C to 85 °C. The birefringence sensitive coefficient of ∂ B / ∂ T is -10-7 / ° C. The sensitivity could reach to -11.9 nm/°C (-29 750 nm/RIU) at 1.8 μm as the temperature is 25 °C. The sensitivity is also studied by the transmission spectrum, and the wavelength spacing between the resonance wavelengths at 85 °C can reach to 492 nm. The average sensitivity could reach to -7.54 nm/°C (-18 850 nm/RIU). The diameter d1 on the sensing characteristics of the temperature sensor is also analyzed. The temperature sensor shows high sensitivity and broad detecting window.

  17. A FBG pulse wave demodulation method based on PCF modal interference filter

    Science.gov (United States)

    Zhang, Cheng; Xu, Shan; Shen, Ziqi; Zhao, Junfa; Miao, Changyun; Bai, Hua

    2016-10-01

    Fiber optic sensor embedded in textiles has been a new direction of researching smart wearable technology. Pulse signal which is generated by heart beat contains vast amounts of physio-pathological information about the cardiovascular system. Therefore, the research for textile-based fiber optic sensor which can detect pulse wave has far-reaching effects on early discovery and timely treatment of cardiovascular diseases. A novel wavelength demodulation method based on photonic crystal fiber (PCF) modal interference filter is proposed for the purpose of developing FBG pulse wave sensing system embedded in smart clothing. The mechanism of the PCF modal interference and the principle of wavelength demodulation based on In-line Mach-Zehnder interferometer (In-line MZI) are analyzed in theory. The fabricated PCF modal interferometer has the advantages of good repeatability and low temperature sensitivity of 3.5pm/°C from 25°C to 60°C. The designed demodulation system can achieve linear demodulation in the range of 2nm, with the wavelength resolution of 2.2pm and the wavelength sensitivity of 0.055nm-1. The actual experiments' result indicates that the pulse wave can be well detected by this demodulation method, which is in accordance with the commercial demodulation instrument (SM130) and more sensitive than the traditional piezoelectric pulse sensor. This demodulation method provides important references for the research of smart clothing based on fiber grating sensor embedded in textiles and accelerates the developments of wearable fiber optic sensors technology.

  18. Long period gratings and rocking filters written with a CO 2 laser in highly-birefringent boron-doped photonic crystal fibers for sensing applications

    Science.gov (United States)

    Carvalho, J. P.; Anuszkiewicz, A.; Statkiewicz-Barabach, G.; Baptista, J. M.; Frazão, O.; Mergo, P.; Santos, J. L.; Urbanczyk, W.

    2012-02-01

    In this work, we demonstrate the possibility of fabricating short-length long-period gratings and rocking filters in highly birefringent Photonic Crystal Fiber using a CO 2 laser. In our experiments both kinds of gratings were made in the same Boron doped highly birefringent PCF using similar exposure parameters. We also present the sensing capabilities of both fabricated gratings to temperature, strain and hydrostatic pressure by interrogation of the wavelength shifts at different resonances.

  19. Erbium doped tellurite photonic crystal optical fiber

    Science.gov (United States)

    Osorio, Sergio P.; Fernandez, Enver; Rodriguez, Eugenio; Cesar, Carlos L.; Barbosa, Luiz C.

    2005-04-01

    In this work we present the fabrication of tellurite glass photonic crystal fiber doped with a very large erbium concentration. Tellurite glasses are important hosts for rare earth ions due to its very high solubility, which allows up to 10,000 ppm Er3+ concentrations. The photonic crystal optical fibers and tellurite glasses can be, therefore, combined in an efficient way to produce doped fibers for large bandwidth optical amplifiers. The preform was made of a 10 mm external diameter tellurite tube filled with an array of non-periodic tellurite capillaries and an erbium-doped telluride rod that constitute the fiber core. The preform was drawn in a Heathway Drawing Tower, producing fibers with diameters between 120 - 140 μm. We show optical microscope photography of the fiber"s transverse section. The ASE spectra obtained with a spectra analyzer show a red shift as the length of the optical fiber increases.

  20. Biased liquid crystal infiltrated photonic bandgap fiber

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Scolari, Lara

    2009-01-01

    A simulation scheme for the transmission spectrum of a photonic crystal fiber infiltrated with a nematic liquid crystal and subject to an external bias is presented. The alignment of the biased liquid crystal is simulated using the finite element method to solve the relevant system of coupled...... partial differential equations. From the liquid crystal alignment the full tensorial dielectric permittivity in the capillaries is derived. The transmission spectrum for the photonic crystal fiber is obtained by solving the generalized eigenvalue problem deriving from Maxwell’s equations using a vector...... element based finite element method. We demonstrate results for a splay aligned liquid crystal infiltrated into the capillaries of a four-ring photonic crystal fiber and compare them to corresponding experiments....

  1. Design and fabrication of hollow-core photonic crystal fibers for high power fast laser beam transportation and pulse compression

    Science.gov (United States)

    Wang, Y. Y.; Peng, Xiang; Alharbi, M.; Dutin, C. F.; Bradley, T. D.; Mielke, Michael; Booth, Timothy; Benabid, F.

    2012-03-01

    We report on recent design and fabrication of Kagome type hollow-core photonic crystal fiber (HC-PCF) for the purpose of high power fast laser beam transportation. The fabricated seven-cell three-ring hypocycloid-shaped large core fiber exhibits an up-to-date lowest attenuation (among all Kagome fibers) of 40dB/km over a broadband transmission centered at 1500nm. We show that the large core size, low attenuation, broadband transmission, single modedness, low dispersion and relatively low banding loss makes it an ideal host for high power laser beam transportation. By filling the fiber with helium gas, a 74μJ, 850fs and 40kHz repetition rate ultra-short pulse at 1550nm has been faithfully delivered with little propagation pulse distortion. Compression of a 105μJ laser pulse from 850fs to 300fs has been achieved by operating the fiber in ambient air.

  2. Analysis of photonic crystal fiber sensor character

    Institute of Scientific and Technical Information of China (English)

    GUO Xuan; LIU Feng; BI Wei-hong

    2007-01-01

    The special character of a PCF which is used as a gas or liquid sensor is discussed. The field distribution is analyzed when the solid core PCF is injected with different medium that has different relative dielectric constant (or refractive index). And the experiential formulas of the relation between refractive index of some kinds of liquid and their concentration are given,in order to measure the concentration of the relative liquid. At the same time, the effect of propagation constant on PCF sensor character is also discussed. Furthermore, the photonic band-gap (PBG) ofPCF (PBG-PCF) is calculated at different medium relative dielectric constant, when it is injected with different medium. That is the principle basis for this kind of PCF sensors.

  3. Broadband, Lensless and Optomechanically Stabilised Coupling into Microfluidic Hollow-Core Photonic Crystal Fiber Using Glass Nanospike

    CERN Document Server

    Zeltner, Richard; Pennetta, Riccardo; Russell, Philip St J

    2016-01-01

    We report a novel technique for launching broadband laser light into liquid-filled hollow-core photonic crystal fiber (HC-PCF). It uniquely offers self-alignment and self-stabilization via optomechanical trapping of a fused silica nanospike, fabricated by thermally tapering and chemically etching a single mode fiber into a tip diameter of 350 nm. We show that a trapping laser, delivering ~300 mW at 1064 nm, can be used to optically align and stably maintain the nanospike at the core center. Once this is done, a broadband supercontinuum beam (~575 to 1064 nm) can be efficiently and close to achromatically launched in the HC-PCF. The system is robust against liquid-flow in either direction inside the HC-PCF and the Fresnel back-reflections are reduced to negligible levels compared to free-space launching or butt-coupling. The results are of potential relevance for any application where the efficient delivery of broadband light into liquid-core waveguides is desired.

  4. First Single-Crystal Mullite Fibers

    Science.gov (United States)

    1997-01-01

    Ceramic-matrix composites strengthened by suitable fiber additions are being developed for high-temperature use, particularly for aerospace applications. New oxide-based fibers, such as mullite, are particularly desirable because of their resistance to high-temperature oxidative environments. Mullite is a candidate material in both fiber and matrix form. The primary objective of this work was to determine the growth characteristics of single-crystal mullite fibers produced by the laser-heated floating zone method. Directionally solidified fibers with nominal mullite compositions of 3Al2O3 2SiO2 were grown by the laser-heated floating zone method at the NASA Lewis Research Center. SEM analysis revealed that the single-crystal fibers grown in this study were strongly faceted and that the facets act as critical flaws, limiting fiber strength. The average fiber tensile strength is 1.15 GPa at room temperature. The mullite fibers exhibit superior strength retention (80 percent of their room temperature tensile strength at 1450 C). Examined by transmission electron microscopy, these mullite single crystals are free of dislocations, low-angle boundaries, and voids. In addition, they show a high degree of oxygen vacancy ordering. High-resolution digital images from an optical microscope furnish evidence of the formation of a liquid-liquid miscibility gap during crystal growth. These images represent the first experimental evidence of liquid immiscibility for these compositions and temperatures. Continuing investigation with controlled seeding of mullite single crystals is planned.

  5. Selective-fluid-filled photonic crystal fibers and applications

    Science.gov (United States)

    Wang, Yiping; Liao, Changrui; Zhong, Xiaoyong; Li, Zhengyong; Liu, Yingjie; Zhou, Jiangtao; Yang, Kaiming

    2013-08-01

    A selective-filling technique was demonstrated to improve the optical properties of photonic crystal fibres (PCFs). Such a technique can be used to fill one or more fluid samples selectively into desired air holes. The technique is based on drilling a hole or carving a groove on the surface of a PCF to expose selected air holes to atmosphere by the use of a micromachining system comprising of a femtosecond infrared laser and a microscope. The exposed section was immersed into a fluid and the air holes are then filled through the well-known capillarity action. Provided two or more grooves are fabricated on different locations and different orientation along the fibre surface, different fluids may be filled into different airholes to form a hybrid fibre. As an example, we filled half of a pure-silica PCF by a fluid with n=1.480 by carving a rectangular groove on the fibre. Consequently, the half-filled PCF became a bandgap-guiding structure (upper half), resulted from a higher refractive index in the fluid rods than in the fibre core, and three bandgaps were observed within the wavelength range from 600 to 1700 nm. Whereas, the lower half (unfilled holes) of the fibre remains an air/silica index-guiding structure. When the hybrid PCF is bent, its bandgaps gradually narrowed, resulted from the shifts of the bandgap edges. The bandgap edges had distinct bend-sensitivities when the hybrid PCF was bent toward different directions. Especially, the bandgaps are hardly affected when the half-filled PCF was bent toward the fluid-filled region. Such unique bend properties could be used to monitor simultaneously the bend directions and the curvature of the engineering structures.

  6. Silica photonic crystal fiber structure in order to simplify the process of making them

    Directory of Open Access Journals (Sweden)

    Ashkan Ghanbari

    2014-04-01

    Full Text Available In this research, a new structure of photonic crystal fibers(PCFs will be proposed,in which instead of using the aire- holes in the cladding region, the flourine(2% doped solid silica rods in order to reduce the problems associated with deformities of air-holes in the cladding region will be used.Also, in the following, a few of the propagation charactristics of the proposed Photonic Crystal Fiber with a conventional silica Photonic Crystal Fiber such as, Normalized frequency,effective refractive index,total dispersion and higher order dispersions ( Group velocity dispersion and Third Order Dispersion will be analyzed and compared. Finally it will be observed that, the proposed PCF structure is much simpler than the conventional one in the fabrication process. But they are not suitable for femtosecond solitons propagation .Also, it will be shown that, the situation of the conventional Photonic Crystal Fiber is much better than the proposed structure in the femtosecond optical solitons propagation.

  7. Dataset on photonic crystal fiber based chemical sensor.

    Science.gov (United States)

    Ahmed, Kawsar; Paul, Bikash Kumar; Chowdhury, Sawrab; Islam, Md Shadidul; Sen, Shuvo; Islam, Md Ibadul; Asaduzzaman, Sayed; Bahar, Ali Newaz; Miah, Mohammad Badrul Alam

    2017-06-01

    This article represents the data set of micro porous core photonic crystal fiber based chemical sensor. The suggested structure is folded cladding porous shaped with circular air hole. Here is investigated four distinctive parameters including relative sensitivity, confinement loss, numerical aperture (NA), and effective area (Aeff). The numerical outcomes are computed over the E+S+C+L+U communication band. The useable sensed chemicals are methanol, ethanol, propanol, butanol, and pentanol whose are lies in the alcohol series (Paul et al., 2017) [1]. Furthermore, V-parameter (V), Marcuse spot size (MSS), and beam divergence (BD) are also investigated rigorously. All examined results have been obtained using finite element method based simulation software COMSOL Multiphysics 4.2 versions with anisotropic circular perfectly matched layer (A-CPML). The proposed PCF shows the high NA from 0.35 to 0.36; the low CL from ~10(-11) to ~10(-7) dB/m; the high Aeff from 5.50 to 5.66 µm(2); the MSS from 1.0 to 1.08 µm; the BD from 0.43 to 0.46 rad at the controlling wavelength λ = 1.55 µm for employing alcohol series respectively.

  8. Dataset on photonic crystal fiber based chemical sensor

    Directory of Open Access Journals (Sweden)

    Kawsar Ahmed

    2017-06-01

    Full Text Available This article represents the data set of micro porous core photonic crystal fiber based chemical sensor. The suggested structure is folded cladding porous shaped with circular air hole. Here is investigated four distinctive parameters including relative sensitivity, confinement loss, numerical aperture (NA, and effective area (Aeff. The numerical outcomes are computed over the E+S+C+L+U communication band. The useable sensed chemicals are methanol, ethanol, propanol, butanol, and pentanol whose are lies in the alcohol series (Paul et al., 2017 [1]. Furthermore, V-parameter (V, Marcuse spot size (MSS, and beam divergence (BD are also investigated rigorously. All examined results have been obtained using finite element method based simulation software COMSOL Multiphysics 4.2 versions with anisotropic circular perfectly matched layer (A-CPML. The proposed PCF shows the high NA from 0.35 to 0.36; the low CL from ~10–11 to ~10−7 dB/m; the high Aeff from 5.50 to 5.66 µm2; the MSS from 1.0 to 1.08 µm; the BD from 0.43 to 0.46 rad at the controlling wavelength λ = 1.55 µm for employing alcohol series respectively.

  9. Deep-ultraviolet second-harmonic generation by combined degenerate four-wave mixing and surface nonlinearity polarization in photonic crystal fiber.

    Science.gov (United States)

    Yuan, Jinhui; Kang, Zhe; Li, Feng; Zhou, Guiyao; Zhang, Xianting; Mei, Chao; Sang, Xinzhu; Wu, Qiang; Yan, Binbin; Zhou, Xian; Zhong, Kangping; Wang, Kuiru; Yu, Chongxiu; Lu, Chao; Tam, Hwa Yaw; Wai, P K A

    2017-08-23

    Deep-ultraviolet (UV) second-harmonics (SHs) have important applications in basic physics and applied sciences. However, it still remains challenging to generate deep-UV SHs especially in optical fibers. Here, for the first time, we experimentally demonstrate the deep-UV SH generations (SHGs) by combined degenerate four-wave mixing (FWM) and surface nonlinearity polarization in an in-house designed and fabricated air-silica photonic crystal fiber (PCF). When femtosecond pump pulses with average input power P av of 650 mW and center wavelength λ p of 810, 820, 830, and 840 nm are coupled into the normal dispersion region close to the zero-dispersion wavelength of the fundamental mode of the PCF, the anti-Stokes waves induced by degenerate FWM process are tunable from 669 to 612 nm. Then, they serve as the secondary pump, and deep-UV SHs are generated within the wavelength range of 334.5 to 306 nm as a result of surface nonlinearity polarization at the core-cladding interface of the PCF. The physical mechanism of the SHGs is confirmed by studying the dependences of the output power P SH of the SHs on the PCF length and time. Finally, we also establish a theoretical model to analyze the SHGs.

  10. Generation of logic gates based on a photonic crystal fiber Michelson interferometer

    Science.gov (United States)

    Sousa, J. R. R.; Filho, A. F. G. F.; Ferreira, A. C.; Batista, G. S.; Sobrinho, C. S.; Bastos, A. M.; Lyra, M. L.; Sombra, A. S. B.

    2014-07-01

    We present a numerical investigation of all-optical logical gates based in a Michelson interferometer (MI) of micro structured fibers, also known as photonic crystal fibers (PCF). We considered an ultra-short pulse propagating along the system in three distinct regimes of pump power. We determine several relevant quantities to characterize the system performance such as transmission, extinction ratio and crosstalk as a function of the dephasing added to one of the Bragg gratings of the Michelson interferometer (MI). High-order effects, such as third-order dispersion, intrapulse Raman scattering and self-steepening were included in the nonlinear generalized Schrödinger equation governing the pulse propagation. Our results show that the proposed device can be used to obtain all-optical XOR, OR and NOT logic gates.

  11. High efficiency terahertz-wave photonic crystal fiber optical parametric oscillator.

    Science.gov (United States)

    Li, Shaopeng; Liu, Hongjun; Huang, Nan; Sun, Qibing; Li, Xuefeng

    2012-08-01

    We theoretically propose phase matched terahertz (THz)-wave generation via degenerate four-wave mixing (FWM) in a fiber optical parametric oscillator (FOPO) with our newly designed photonic crystal fiber (PCF). Perfect phase matching is realized when we locate the pump wavelength in the normal group-velocity dispersion (GVD) regime. The generated THz-wave can be tuned from 4.7578 to 5.9015 THz by varying the pump wavelength. Moreover, peak power of 27.38 W at 5.9015 THz with conversion efficiency of 1.37% is realized when the pump peak power of 2000 W is at 4.675 μm in our FOPO.

  12. Structure fits the purpose: photonic crystal fibers for evanescent-field surface-enhanced Raman spectroscopy.

    Science.gov (United States)

    Khaing Oo, Maung Kyaw; Han, Yun; Kanka, Jiri; Sukhishvili, Svetlana; Du, Henry

    2010-02-15

    We report numerical simulation and hyperspectral Raman imaging of three index-guiding solid-core photonic crystal fibers (PCFs) of different air-cladding microstructures to assess their respective potential for evanescent-field Raman spectroscopy, with an emphasis on achieving surface-enhanced Raman scattering (SERS) over the entire fiber length. Suspended-core PCF consisting of a silica core surrounded by three large air channels conjoined by a thin silica web is the most robust of the three SERS-active PCFs, with a demonstrated detection sensitivity of 1x10(-10) M R6G in an aqueous solution of only approximately 7.3 microL sampling volume.

  13. Modelling a nonlinear optical switching in a standard photonic crystal fiber infiltrated with carbon disulfide

    Science.gov (United States)

    Munera, Natalia; Acuna Herrera, Rodrigo

    2016-06-01

    In this letter, a numerical analysis is developed for the propagation of ultrafast optical pulses through a standard photonic crystal fiber (PCF) consisting of two infiltrated holes using carbon disulfide (CS2). This material is a good choice since it has highly nonlinear properties, what makes it a good candidate for optical switching and broadband source at low power compared to traditional nonlinear fiber coupler. Based on supermodes theory, a set of generalized nonlinear equations is presented in order to study the propagation characteristics. It is shown in this letter that it is possible to get optical switching behavior at low power and how the dispersion, as well as, the two infiltrated holes separation influence this effect. Finally, we see that supercontinuum generation can be induced equally in both infiltrated holes despite no initial excitation at one hole.

  14. Ultrabroadband, Midinfrared Supercontinuum Generation in Dispersion Engineered As2Se3-Based Chalcogenide Photonic Crystal Fibers

    Directory of Open Access Journals (Sweden)

    Rim Cherif

    2013-01-01

    Full Text Available Small core As2Se3-based photonic crystal fibers (PCFs are accurately characterized for compact, high power, ultrabroadband, and coherent supercontinuum generation within few millimeters fiber length. Bandwidths of ~5.3 μm, 5 μm, and 3.2 μm were calculated for hole-to-hole spacings Λ= 3.5 μm, 4.5 μm, and 5.5 μm, respectively. The spectral broadening in the chalcogenide PCF is mainly caused by self-phase modulation and Raman-induced soliton self-frequency shift. The results show that small core As2Se3 PCFs are a promising candidate for mid-IR SCG up to ~8 μm.

  15. Difference frequency generation of femtosecond mid infrared pulses employing intense Stokes pulses excitation in a photonic crystal fiber.

    Science.gov (United States)

    Yao, Yuhong; Knox, Wayne H

    2012-11-05

    We demonstrate a novel method of generating milli-watt level mid-IR (MIR) pulses based on difference frequency mixing of the output from a 40 MHz Yb fiber Chirped Pulse Amplifier (CPA) and the intense Stokes pulses generated in a photonic crystal fiber (PCF) with two closely spaced zero dispersion wavelengths (ZDW). By taking advantage of the unique dispersion profile of the fiber, high power narrowband Stokes pulses are selectively generated in the normal dispersion region of the PCF with up to 1.45 nJ of pulse energy. Mixing with 12 nJ of pump pulses at 1035 nm in a type-II AgGaS(2) crystal yields MIR pulses around 5.5 µm wavelength with up to 3 mW of average power and 75 pJ of pulse energy. The reported method can be extended to generation of other MIR wavelengths by selecting PCFs with different second ZDWs or engineering the fiber dispersion profile via longitudinal tapering.

  16. Optical fiber sensors fabricated by the focused ion beam technique

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Wang, Fei; Bang, Ole

    2012-01-01

    crystal fiber (PCF). Using this technique we fabricate a highly compact fiber-optic Fabry-Pérot (FP) refractive index sensor near the tip of fiber taper, and a highly sensitive in-line temperature sensor in PCF. We also demonstrate the potential of using FIB to selectively fill functional fluid......Focused ion beam (FIB) is a highly versatile technique which helps to enable next generation of lab-on-fiber sensor technologies. In this paper, we demonstrate the use application of FIB to precisely mill the fiber taper and end facet of both conventional single mode fiber (SMF) and photonic...

  17. A Highly Sensitive Gold-Coated Photonic Crystal Fiber Biosensor Based on Surface Plasmon Resonance

    Directory of Open Access Journals (Sweden)

    Md. Rabiul Hasan

    2017-03-01

    Full Text Available In this paper, we numerically demonstrate a two-layer circular lattice photonic crystal fiber (PCF biosensor based on the principle of surface plasmon resonance (SPR. The finite element method (FEM with circular perfectly matched layer (PML boundary condition is applied to evaluate the performance of the proposed sensor. A thin gold layer is deposited outside the PCF structure, which acts as the plasmonic material for this design. The sensing layer (analyte is implemented in the outermost layer, which permits easy and more practical fabrication process compared to analyte is put inside the air holes. It is demonstrated that, at gold layer thickness of 40 nm, the proposed sensor shows maximum sensitivity of 2200 nm/RIU using the wavelength interrogation method in the sensing range between 1.33–1.36. Besides, using an amplitude interrogation method, a maximum sensitivity of 266 RIU−1 and a maximum sensor resolution of 3.75 × 10−5 RIU are obtained. We also discuss how phase matching points are varied with different fiber parameters. Owing to high sensitivity and simple design, the proposed sensor may find important applications in biochemical and biological analyte detection.

  18. Design of a pentagonal photonic crystal fiber with high birefringence and large flattened negative dispersion.

    Science.gov (United States)

    Li, Xuyou; Liu, Pan; Xu, Zhenlong; Zhang, Zhiyong

    2015-08-20

    Novel pentagonal photonic crystal fiber with high birefringence, large flattened negative dispersion, and high nonlinearity is proposed. The dispersion and birefringence properties of this structure are simulated and analyzed numerically based on the full vector finite element method (FEM). Numerical results indicate that the fiber obtains a large average dispersion of -611.9  ps/nm/km over 1,460-1,625 nm and -474  ps/nm/km over 1425-1675 nm wavelength bands for two kinds of optimized designs, respectively. In addition, the proposed PCF shows a high birefringence of 1.67×10-2 and 1.75×10-2 at the operating wavelength of 1550 nm. Moreover, the influence of the possible variation in the parameters during the fabrication process on the dispersion and birefringence properties is studied. The proposed PCF would have important applications in polarization maintaining transmission systems, residual dispersion compensation, supercontinuum generation, and the design of widely tunable wavelength converters based on four-wave mixing.

  19. Anomalous bending effect in photonic crystal fibers.

    Science.gov (United States)

    Tu, Haohua; Jiang, Zhi; Marks, Daniel L; Boppart, Stephen A

    2008-04-14

    An unexpected transmission loss up to 50% occurs to intense femtosecond pulses propagating along an endlessly single-mode photonic crystal fiber over a length of 1 m. A specific leaky-fiber mode gains amplification along the fiber at the expense of the fundamental fiber mode through stimulated four-wave mixing and Raman scattering, leading to this transmission loss. Bending near the fiber entrance dissipates the propagating seed of this leaky mode, preventing the leaky mode amplification and therefore enhancing the transmission of these pulses.

  20. SPR optimization using metamaterials in a D-type PCF refractive index sensor

    Science.gov (United States)

    Santos, D. F.; Guerreiro, A.; Baptista, J. M.

    2017-01-01

    Using the finite element method (FEM), this paper presents a numerical investigation of the performance analysis of a D-type photonic crystal fiber (D-type PCF) for refractive index sensing, based on surface plasmon resonance (SPR) with a planar structure made out of a metamaterial. COMSOL Multiphysics was used to evaluate the design of the referred refractive index optical fiber sensor, with higher accuracy and considerable economy of time and resources. A study of different metamaterials concentrations conformed by aluminum oxide (Al2O3) and silver (Ag) is carried out. Another structural parameters, which influences the refractive index sensor performance, the thickness of the metamaterial, is also investigated. The results indicate that the use of metamaterials provides a way of improving the performance of SPR sensors on optical fibers and allows to tailor the working parameters of the sensor.

  1. Parameter analysis of a photonic crystal fiber with raised-core index profile based on effective index method

    Institute of Scientific and Technical Information of China (English)

    Faramarz E. Seraji; Mahnaz Rashidi; Vajieh Khasheie

    2006-01-01

    @@ Photonic crystal fibers (PCFs) with a stepped raised-core profile and one layer equally spaced holes in the cladding are analyzed. Using effective index method and considering a raised step refractive index difference between the index of the core and the effective index of the cladding, we improve the characteristic parameters such as numerical aperture and V-parameter, and reduce its bending loss to about one tenth of a conventional PCF. Implementing such a structure in PCFs may be one step forward to achieve low loss PCFs for communication applications.

  2. Large-Mode-Area Double-Cladding Photonic Crystal Fiber Laser in the Watt Range at 980 nm

    Institute of Scientific and Technical Information of China (English)

    LI Ping-Xue; ZHANG Xue-Xia; LIU Zhi; CHI Jun-Jie

    2011-01-01

    @@ We report on a quasi-three-level large-mode-area double-clad Yb-doped fiber laser that adopts a linear cavity consisting of a 0°fiber end and a cavity mirror.Two kinds of Yb-doped photonic crystal fiber(PCF) with different inner-clads (170 μm and 200μm) and absorption coefficients (4.5 dB/m and 3 dB/m) are used as the gain media.By optimizing the structure and elements of the cavity, maximum output powers of 1.24 W and 1.1 W were yielded with optical conversion efficiencies of 7.8% and 6.8% when the fiber lengths were 25 cm and 40 cm with 170μm and 200 μm inner-claddings, respectively.

  3. Coherence properties of supercontinuum generated in highly nonlinear photonic crystal fibers

    Science.gov (United States)

    Zhang, Yuji

    In this dissertation, experimentally measured spectral and coherence evolution of supercontinuum (SC) is presented. Highly nonlinear soft-glass photonic crystal fibers (PCF) were used for SC generation, including lead-silicate (Schott SF6) PCFs of a few different lengths: 10.5 cm, 4.7 mm, and 3.9 mm, and a tellurite PCF of 2.7 cm. The pump is an optical parametric oscillator (OPO) at 1550 nm with pulse energy in the order of nanojoule (nJ) and pulse duration of 105 femtosecond (fs). The coherence of SC was measured using the delayed-pulse method, where the interferometric signal was sent into an optical spectrum analyzer (OSA) and spectral fringes were recorded. By tuning the pump power, power-dependent evolution of spectrum and coherence was obtained. Numerical simulations based on the generalized nonlinear Schrodinger equation (GNLSE) were performed. To match the measured data, the simulated spectral evolution was optimized by iteratively tuning parameters and comparing features. To further match the simulated coherence evolution with the measurement, shot noise and pulse-to-pulse power fluctuation were added in the pump, and the standard deviation of the fluctuation was tuned. Good agreement was obtained between the simulated and the measured spectral evolution, in spite of the unavailability of some physical parameters for simulation. It is demonstrated in principle that, given a measured spectral evolution, the fiber length, and the average power of SC, all other parameters can be determined unambiguously, and the spectral evolution can be reproduced in the simulations. Most importantly, the soliton fission length can be simulated accurately. The spectral evolution using the 4.7- and the 3.9-mm SF6 PCFs shows a pattern dominated by self phase modulation (SPM). This indicates that, these fiber lengths are close to the soliton fission length at the maximum power. The spectral evolution using the 10.5-cm SF6 PCF and the 2.7-cm tellurite PCF shows a soliton

  4. Refractive index sensing characteristics of D-shape double core photonic crystal fiber based on surface plasmon resonance

    Science.gov (United States)

    Liu, Feng; Li, Shi-tao; Guo, Xuan

    2016-10-01

    A refractive index (RI) sensor and its sensing characteristics based on surface plasmon resonance (SPR) of D-shape double core photonic crystal fiber (DC-PCF) are researched theoretically in this letter. The basic sensor principle is the SPR light intensity modulation of polished D-shape DC-PCF. The influence of the polished angle and depth on the DC-PCF SPR characteristics is discussed extensively by using the finite element method (FEM). The effects of the coated metal type and its layer thickness on the resonant intensity are also analyzed. The relationship between the analyte RI and resonant wavelength is numerically simulated. The theoretical results show that the sensor's RI sensitivity exhibits about 2000 nm/RIU with the structure parameters of 60° polished angle, 58.5μm polished depth and 70nm thickness of the silver layer. Furthermore, if the single wavelength laser is chosen, the detection of the two core light intensity difference will improve the ability of resistance to environmental interference. The simple sensor structure and high sensitivity can make this technology for online refractive index measurement in widespread areas.

  5. Supercontinuum generation in optimized photonic crystal fiber at 1.3 μm for optical coherence tomography

    Directory of Open Access Journals (Sweden)

    Ferhat M. L.

    2016-01-01

    Full Text Available In this paper, we have designed a high nonlinear photonic crystal fiber (HN-PCF based on square-lattice geometry with the zero dispersion wavelength (ZDW around 1300 nm. The exploitation of different nonlinear mechanisms in the pulse propagation allows supercontinuum generation, which is used to enhance the axial resolution of the optical coherence tomography (OCT systems. First mechanism demonstrated is the soliton self-compression, we came up to realize pulse compression of 28.4 fs around 1300 nm by the generation of solitons of different orders to obtain ultrashort pulses of about 4 fs pulses in a PCF length of 66cm, then, we improved the pulse compression until 1.2 fs in a PCF length of 26 cm.The exploitation of the interplay between many nonlinear effects as self-phase modulation, intrapulse Raman scattering and self-steepening as second mechanism allows a generation of supercontinuum with a spectral bandwith of SBW=260 nm. The obtained spectral bandwidth could contribute to enhance the OCwith OCT imaging axial resolution which can be evaluated to 2.8 μm in air, working at 1.3 μm center wavelength which is widely used in several fields.

  6. Compact and high-power broadband terahertz source based on femtosecond photonic crystal fiber amplifier

    Institute of Scientific and Technical Information of China (English)

    Feng Liu; Lu Chai; Qirong Xing; Chingyue Wang; Weili Zhang; Xiaokun Hu; Jiang Li; Changlei Wang; Yi Li; Yanfeng Li; YoujianSong; Bowen Liu; Minglie Hu

    2011-01-01

    Terahertz (THz) waves,generally defined in the 0.1-10 THz range are finding growing applications in various important fields[1-4] such as imaging,food and pharmaceutical quality coutrol,security screening,and standoff detection of bio-threat species,among which THz timedomain spectroscopy (THz-TDS)[5] is particularly appealing.However,the low conversion efficiency and low power of typical broadband THz sources severely hinder the utility and realization of the full potential of THzTDS.Recently,there have been efforts to generate THz pulses using compact pump sources in fiber format[6,7].%We present a review of the development of a compact and high-power broadband terahertz (THz) source optically excited by a femtosecond photonic crystal fiber (PCF) amplifier. The large mode area of the PCF and the stretcher-free configuration make the pump source compact and very efficient. Broadband THz pulseg of 150 μW extending from 0.1 to 3.5 TH2 are generated from a 3-mm-thick GaP crystal through optical rectification of 12-W pump pulses with duration of 66 & and a repetition rate of 52 MHz. A strong saturation effect is observed, which is attributed to pump pulse absorption; a Z-scan measurement shows that three-photon absorption dominates the nonlinear absorption when the crystal is pumped by femtosecond pulses at 1040 run. A further scale-up of the THz source power is expected to find important applications in THz nonlinear optics and nonlinear THz spectroscope

  7. Electrically tunable liquid crystal photonic bandgap fiber laser

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin; Scolari, Lara; Wei, Lei;

    2010-01-01

    We demonstrate electrical tunability of a fiber laser by using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate an al...

  8. Broadband Enhancement of Optical Frequency Comb Using Cascaded Four-Wave Mixing in Photonic Crystal Fiber

    Directory of Open Access Journals (Sweden)

    Tawfig Eltaif

    2017-01-01

    Full Text Available A cascaded intensity modulator (IM and phase modulator (PM are used to modulate a continuous-wave (CW laser and generate an optical frequency comb (OFC. Thus, the generated comb is utilized as an initial seed and combined with another CW-laser to generate four-wave mixing (FWM in photonic crystal fiber (PCF. Results show that an initial flat 30 GHz OFC of 29, 55 lines within power fluctuation of 0.8 dB and 2 dB, respectively, can be achieved by setting the ratio of the DC bias to amplitude of sinusoidal signal at 0.1 and setting the modulation indices of both IM and PM at 10. Moreover, the 1st order of FWM created through 14 m of PCF has over 68 and 94 lines with fluctuation of 0.8 dB and 2 dB, respectively. Hence, the generated wavelengths of 1st left and right order of FWM can be tuned in a range from ~1500 nm to ~1525 nm and ~1590 nm to ~1604 nm, respectively.

  9. Highly non-linear solid core photonic crystal fiber with one nano hole

    Energy Technology Data Exchange (ETDEWEB)

    Gangwar, Rahul Kumar, E-mail: rahul0889@gmail.com; Bhardwaj, Vanita, E-mail: bhardwajphy12@gmail.com; Singh, Vinod Kumar, E-mail: singh.vk.ap@ismdhanbad.co.in [Department of Applied Physics, Indian School of Mines, Dhanbad, Jharkhand (India)

    2015-08-28

    The numerical study of newly designed solid core photonic crystal fiber (SCPCF) having three hexagonal air hole rings in cladding region and one small nano hole at the center are presented. By using full vectorial finite element method (FV-FEM), we analyses the optical properties like effective area, nonlinearity and confinement loss of the proposed PCF. Results show that the change in core diameter controls the effective area, nonlinearity and confinement loss. A low effective area (3.34 µm{sup 2}), high nonlinearity (36.34 W{sup −1}km{sup −1}) and low confinement loss (0.00106 dB/km) are achieved at the communication wavelength 1.55 µm for the SCPCF having core air hole diameter 0.10 µm, cladding air holes diameter 1.00 µm and pitch 2.50 µm. This type of PCF is very useful in non-linear applications such as supercontinuum generation, four wave mixing, second harmonic generation etc.

  10. Distributed optical fibre devices based on liquid crystal infiltrated photonic crystal fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Broeng, Jes; Hermann, D.S.

    2004-01-01

    We describe a new class of hybrid photonic crystal fibers, which are liquid crystal infiltrated fibers. Using these fibers, we demonstrate 'distributed' tunable filter and switching functionalities operating by the photonic bandgap effect....

  11. Prediction of photonic crystal fiber characteristics by Neuro-Fuzzy system

    Science.gov (United States)

    Pourmahyabadi, M.; Mohammad Nejad, S.

    2009-10-01

    The most common methods applied in the analysis of photonic crystal fibers (PCFs) are finite difference time/frequency domain (FDTD/FDFD) method and finite element method (FEM). These methods are very general and reliable (well tested). They describe arbitrary structure but are numerically intensive and require detailed treatment of boundaries and complex definition of calculation mesh. So these conventional models that simulate the photonic response of PCFs are computationally expensive and time consuming. Therefore, a practical design process with trial and error cannot be done in a reasonable amount of time. In this article, an artificial intelligence method such as Neuro-Fuzzy system is used to establish a model that can predict the properties of PCFs. Simulation results show that this model is remarkably effective in predicting the properties of PCF such as dispersion, dispersion slope and loss over the C communication band.

  12. High Pressure Gases in Hollow Core Photonic Crystal Fiber:A New Nonlinear Medium

    CERN Document Server

    Azhar, Mohiudeen; Chang, Wonkeun; Joly, Nicolas; Russell, Philip

    2012-01-01

    The effective Kerr nonlinearity of hollow-core kagome-style photonic crystal fiber (PCF) filled with argon gas increases over 100 times when the pressure is increased from 1 to 150 bar, reaching 15 % of that of bulk silica glass, while the zero dispersion wavelength shifts from 300 to 900 nm. The group velocity dispersion of the system is uniquely pressure-tunable over a wide range while avoiding Raman scattering : absent in noble gases and having an extremely high optical damage threshold. As a result, detailed and well controlled studies of nonlinear effects can be performed, in both normal and anomalous dispersion regimes, using only a fixed-frequency pump laser. For example, the absence of Raman scattering permits clean observation, at high powers, of the interaction between a modulational instability side-band and a soliton created dispersive wave. Excellent agreement is obtained between numerical simulations and experimental results. The system has great potential for the realisation of reconfigurable s...

  13. Design of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    Shuqin Lou; Hong Fang; Honglei Li; Tieying Guo; Lei Yao; Liwen Wang; Weiguo Chen; Shuisheng Jian

    2008-01-01

    We propose a new structure of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber (PCF). Through optimizing the diameters of the first two inner rings of air-holes and the GeO2 doping concentration of the core, the nonlinear coefficient is up to 47 W-1.km-1 at the wavelength of 1.55 μm and nearly-zero flattened dispersion of±0.5 ps/(nm.km) is achieved in the telecommunication window (1460 - 1625 nm). Due to the use of GeO2-doped core, this innovative structure can offer not only a large nonlinear coefficient and broadband nearly-zero flattened dispersion but also low leakage losses.

  14. Electrically tunable liquid crystal photonic bandgap fiber laser

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin; Scolari, Lara; Wei, Lei

    2010-01-01

    We demonstrate electrical tunability of a fiber laser by using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate an all......-spliced laser cavity based on a liquid crystal photonic bandgap fiber mounted on a silicon assembly, a pump/signal combiner with single-mode signal feed-through and an ytterbium-doped photonic crystal fiber. The laser cavity produces a single-mode output and is tuned in the range 1040-1065nm by applying...

  15. Simultaneous multi-channel CMW-band and MMW-band UWB monocycle pulse generation using FWM effect in a highly nonlinear photonic crystal fiber.

    Science.gov (United States)

    Zhang, Fangzheng; Wu, Jian; Fu, Songnian; Xu, Kun; Li, Yan; Hong, Xiaobin; Shum, Ping; Lin, Jintong

    2010-07-19

    We propose and experimentally demonstrate a scheme to simultaneously realize multi-channel centimeter wave (CMW) band and millimeter wave (MMW) band ultra-wideband (UWB) monocycle pulse generation using four wave mixing (FWM) effect in a highly nonlinear photonic crystal fiber (HNL-PCF). Two lightwaves carrying polarity-reversed optical Gaussian pulses with appropriate time delay and another lightwave carrying a 20 GHz clock signal are launched into the HNL-PCF together. By filtering out the FWM idlers, two CMW-band UWB monocycle signals and two MMW-band UWB monocycle signals at 20 GHz are obtained simultaneously. Experimental measurements of the generated UWB monocycle pulses at individual wavelength, which comply with the FCC regulations, verify the feasibility and flexibility of proposed scheme for use in practical UWB communication systems.

  16. Numerical simulation of coherent visible-to-near-infrared supercontinuum generation in the CHCl3-filled photonic crystal fiber with 1.06 μm pump pulses

    Science.gov (United States)

    Wang, Chun-can; Li, Wei-min; Li, Na; Wang, Wen-quan

    2017-02-01

    The hollow-core photonic crystal fiber (PCF) is filled by highly nonlinear liquid chloroform (CHCl3) in the center core. The CHCl3-filled PCF with an appropriate geometric parameters exhibits a normal dispersion profile in the visible-to-near-infrared (NIR) region, where the values of group velocity dispersion (GVD) in the vicinity of 1060-nm pump wavelength can be tuned in the range from -20 to -50 ps/nm/km. Furthermore, the nonlinear parameters at wavelengths power), the generated supercontinuum (SC) spectra with high degree of coherence can cover near 2 octaves spanning from 340 to 1360 nm at -20 dB level. The spectral variations are < 5 dB in the wavelength range of 365-1315 nm.

  17. Coupling to photonic crystal fibers

    DEFF Research Database (Denmark)

    Hougaard, Kristian G.; Bjarklev, Anders Overgaard; Knudsen, Erik;

    2002-01-01

    In this work we have analyzed the correspondence between the fundamental mode of PCFs and Gaussian modes as a function of frequency, pitch, and air hole size. Such analysis provides insight into design space regions of PCFs, where low-loss coupling to standard fibers may be obtained....

  18. A photonic crystal fiber with zero dispersion at 1064 nm

    DEFF Research Database (Denmark)

    Andersen, Peter Andreas

    2002-01-01

    We report on the dispersion properties of a single mode, large core photonic crystal fiber. Using white light interferometry the fiber is found to have zero dispersion at 1064 nm......We report on the dispersion properties of a single mode, large core photonic crystal fiber. Using white light interferometry the fiber is found to have zero dispersion at 1064 nm...

  19. Low-loss polarization-maintaining fusion splicing of single-mode fibers and hollow-core photonic crystal fibers, relevant for monolithic fiber laser pulse compression

    DEFF Research Database (Denmark)

    Kristensen, Jesper Toft; Houmann, Andreas; Liu, Xiaomin;

    2008-01-01

    B. The reciprocal HC-PCF-to-PM-SMF splice loss is found to be 2.19 ± 0.33 dB, which is caused by the mode evolution in HC-PCF. The return loss in both cases was measured to be −14 dB. We show that a splice defect is caused by the HC-PCF cleave defect, and the lossy splice can be predicted at an early stage...... of the splicing process. We also demonstrate that the higher splice loss compromises the PM properties of the splice. Our splicing technique was successfully applied to the realization of a low-loss, environmentally stable monolithic PM fiber laser pulse compressor, enabling direct end-of-the-fiber femtosecond...

  20. Efficient Spectral Broadening in the 100-W Average Power Regime Using Gas Filled Kagome HC-PCF and Pulse Compression

    CERN Document Server

    Emaury, Florian; Debord, Benoit; Ghosh, Debashri; Diebold, Andreas; Gerome, Frederic; Suedmeyer, Thomas; Benabid, Fetah; Keller, Ursula

    2014-01-01

    We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a Kagome HC-PCF containing 13 bar of static Argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100 W of average power and >100 MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100 MW and sub-100-fs pulses at megahertz repetition rate, is very int...

  1. A New Design of As2Se3‎ Chalcogenide Glass Photonic Crystal Fiber with Ultra-Flattened Dispersion in Mid-Infrared Wavelength Range

    Directory of Open Access Journals (Sweden)

    Mahmood Seifouri

    2014-12-01

    Full Text Available In this paper, we report a new design of As2Se3‎ chalcogenide glass photonic crystal fiber (PCF with ultra-flattened dispersion at mid-infrared wavelength range. We have used the plane wave expansion method (PWE for designing the structure of As2Se3‎ glass PCF at different wavelength windows. In the proposed structure with hole to hole spacing and , the negative dispersion is -1025 ps/nm/km at the wavelength of 1.55µm, and also an ultra-flattened dispersion is achieved at the wavelength range of 3.5-18μm. Hence such PCFs have a high potential to be used as dispersion compensating fibers at 1.55µm wavelength in optical communication systems. The ultra-flattened dispersion at the wavelength range of 3.5-18μm can be employed to achieve high power super-continuum generation. The nonlinear coefficient of the proposed PCF is 1.5 W-1m-1 at the wavelength of 1.55µm. Chalcogenide glasses are known to have both high transparency and nonlinearity in a wide range of infrared wavelengths compared to silica glasses.

  2. Ultrahigh and persistent optical depths of cesium in Kagomé-type hollow-core photonic crystal fibers.

    Science.gov (United States)

    Kaczmarek, Krzysztof T; Saunders, Dylan J; Sprague, Michael R; Kolthammer, W Steven; Feizpour, Amir; Ledingham, Patrick M; Brecht, Benjamin; Poem, Eilon; Walmsley, Ian A; Nunn, Joshua

    2015-12-01

    Alkali-filled hollow-core fibers are a promising medium for investigating light-matter interactions, especially at the single-photon level, due to the tight confinement of light and high optical depths achievable by light-induced atomic desorption (LIAD). However, until now these large optical depths could only be generated for seconds, at most once per day, severely limiting the practicality of the technology. Here we report the generation of the highest observed transient (>10(5) for up to a minute) and highest observed persistent (>2000 for hours) optical depths of alkali vapors in a light-guiding geometry to date, using a cesium-filled Kagomé-type hollow-core photonic crystal fiber (HC-PCF). Our results pave the way to light-matter interaction experiments in confined geometries requiring long operation times and large atomic number densities, such as generation of single-photon-level nonlinearities and development of single photon quantum memories.

  3. High-power picosecond terahertz-wave generation in photonic crystal fiber via four-wave mixing.

    Science.gov (United States)

    Wu, Huihui; Liu, Hongjun; Huang, Nan; Sun, Qibing; Wen, Jin

    2011-09-20

    We demonstrate picosecond terahertz (THz)-wave generation via four-wave mixing in an octagonal photonic crystal fiber (O-PCF). Perfect phase-matching is obtained at the pump wavelength of 1.55 μm and a generation scheme is proposed. Using this method, THz waves can be generated in the frequency range of 7.07-7.74 THz. Moreover, peak power of 2.55 W, average power of 1.53 mW, and peak conversion efficiency of more than -66.65 dB at 7.42 THz in a 6.25 cm long fiber are realized with a pump peak power of 2 kW.

  4. Enhanced intermodal four-wave mixing for visible and near-infrared wavelength generation in a photonic crystal fiber.

    Science.gov (United States)

    Yuan, Jinhui; Sang, Xinzhu; Wu, Qiang; Zhou, Guiyao; Li, Feng; Zhou, Xian; Yu, Chongxiu; Wang, Kuiru; Yan, Binbin; Han, Ying; Tam, Hwa Yaw; Wai, P K A

    2015-04-01

    We demonstrate experimentally an enhanced intermodal four-wave mixing (FWM) process through coupling positively chirped femtosecond pulses into the deeply normal dispersion region of the fundamental mode of an in-house fabricated photonic crystal fiber (PCF). In the intermodal phase-matching scheme, the energy of the pump waves at 800 nm in the fundamental mode is efficiently converted into the anti-Stokes waves around 553 nm and the Stokes waves within the wavelength range of 1445-1586 nm in the second-order mode. The maximum conversion efficiency of η(as) and η(s) of anti-Stokes and Stokes waves can be up to 21% and 16%, respectively. The Stokes frequency shift Ω is 5580  cm(-1). The fiber bending and intermodal walk-off effect of pulses do not have significant influence on the nonlinear optical process.

  5. Soliton blueshift in tapered photonic crystal fibers.

    Science.gov (United States)

    Stark, S P; Podlipensky, A; Russell, P St J

    2011-02-25

    We show that solitons undergo a strong blueshift in fibers with a dispersion landscape that varies along the direction of propagation. The experiments are based on a small-core photonic crystal fiber, tapered to have a core diameter that varies continuously along its length, resulting in a zero-dispersion wavelength that moves from 731 nm to 640 nm over the transition. The central wavelength of a soliton translates over 400 nm towards a shorter wavelength. This is accompanied by strong emission of radiation into the UV and IR spectral regions. The experimental results are confirmed by numerical simulation.

  6. Polarization squeezing with photonic crystal fibers

    DEFF Research Database (Denmark)

    Milanovic, J.; Huck, Alexander; Heersink, J.

    2007-01-01

    We report on the generation of polarization squeezing by employing intense, ultrashort light pulses in a single pass method in photonic crystal fibers. We investigated the squeezing behavior near the zero-dispersion wavelength and in the anomalous dispersion regime by using two distinct fibers. We...... observed a maximal squeezing at 810 nm of -3.3 +/- 0.3 dB with an excess noise of +16.8 +/- 0.3 dB in the anomalous regime. Correcting for linear and interference losses between the polarization modes, this corresponds to -6 +/- 1 dB. The ratio of squeezing to excess noise indicates the creation of a much...

  7. Electrically tunable Yb-doped fiber laser based on a liquid crystal photonic bandgap fiber device

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin; Scolari, Lara; Wei, Lei

    2010-01-01

    We demonstrate electrical tunability of a fiber laser using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a tunable liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate...... an all-spliced laser cavity based on the liquid crystal photonic bandgap fiber mounted on a silicon assembly, a pump/signal combiner with single-mode signal feed-through and an ytterbium-doped photonic crystal fiber. The laser cavity produces a single-mode output and is tuned in the range 1040-1065 nm...

  8. Broadband robustly single-mode hollow-core PCF by resonant filtering of higher-order modes.

    Science.gov (United States)

    Uebel, Patrick; Günendi, Mehmet C; Frosz, Michael H; Ahmed, Goran; Edavalath, Nitin N; Ménard, Jean-Michel; Russell, Philip St J

    2016-05-01

    We report a hollow-core photonic crystal fiber that is engineered so as to strongly suppress higher-order modes, i.e., to provide robust LP01 single-mode guidance in all the wavelength ranges where the fiber guides with low loss. Encircling the core is a single ring of nontouching glass elements whose modes are tailored to ensure resonant phase-matched coupling to higher-order core modes. We show that the resulting modal filtering effect depends on only one dimensionless shape parameter, akin to the well-known d/Λ parameter for endlessly single-mode solid-core PCF. Fabricated fibers show higher-order mode losses some ∼100 higher than for the LP01 mode, with LP01 losses 110  THz bandwidth.

  9. The analogy between photonic crystal fibres and step index fibres

    DEFF Research Database (Denmark)

    Birks, T.A.; Mogilevtsev, D.; Knight, J.C.

    1999-01-01

    The propagation constant of a photonic crystal fiber (PCF) can be approximated by substituting the effective V-value and NA into a formula valid for step index fibers (SIF), provided the V-value is defined with a core radius of 0.625 $Lambda@. V$PRM and NA must still be computed. Care must be taken...

  10. Optical properties of photonic crystal fiber with integral micron-sized Ge wire.

    Science.gov (United States)

    Tyagi, H K; Schmidt, M A; Prill Sempere, L; Russell, P St J

    2008-10-27

    Using a selective hole closure technique, individual hollow channels in silica-air photonic crystal fibers are filled with pure Ge by pumping in molten material at high pressure. The smallest channels filled so far are 600 nm in diameter, which is 10x smaller than in previous work. Electrical conductivity and micro-Raman measurements indicate that the resulting cm-long wires have a high degree of crystallinity. Optical transmission spectra are measured in a sample with a single wire placed adjacent to the core of an endlessly single-mode photonic crystal fiber. This renders the fiber birefringent, as well as causing strongly polarization-dependent transmission losses, with extinction ratios as high as 30 dB in the visible. In the IR, anti-crossings between the glass-core mode and resonances on the high index Ge wire create a series of clear dips in the spectrum transmitted through the fiber. The measurements agree closely with the results of finite-element simulations in which the wavelength dependence of the dielectric constants is taken fully into account. A toy model based on a multilayer structure is used to help interpret the results. Finally, the temperature dependence of the anti-crossing wavelengths is measured, the preliminary results suggesting that the structure might form the basis of a compact optical thermometer. Since Ge provides electrical conductance together with low-loss guidance in the mid-IR, Ge-filled PCF seems likely to lead to new kinds of in-fiber detector and sensor, as well as having potential uses in ultra-low-threshold nonlinear optical devices.

  11. High-temperature fiber-optic Fabry-Perot interferometric sensors

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Wenhui; Jiang, Yi; Gao, Ran, E-mail: bitjy@bit.edu.cn [School of Optoelectronics, Beijing Institute of Technology, Beijing 100081 (China); Liu, Yuewu [Key Laboratory for Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Science, Beijing 100190 (China)

    2015-05-15

    A photonic crystal fiber (PCF) based high-temperature fiber-optic sensor is proposed and experimentally demonstrated. The sensor head is a Fabry-Perot cavity manufactured with a short section of endless single-mode photonic crystal fiber (ESM PCF). The interferometric spectrum of the Fabry-Perot interferometer is collected by a charge coupled device linear array based micro spectrometer. A high-resolution demodulation algorithm is used to interrogate the peak wavelengths. Experimental results show that the temperature range of 1200 °C and the temperature resolution of 1 °C are achieved.

  12. High-temperature fiber-optic Fabry-Perot interferometric sensors.

    Science.gov (United States)

    Ding, Wenhui; Jiang, Yi; Gao, Ran; Liu, Yuewu

    2015-05-01

    A photonic crystal fiber (PCF) based high-temperature fiber-optic sensor is proposed and experimentally demonstrated. The sensor head is a Fabry-Perot cavity manufactured with a short section of endless single-mode photonic crystal fiber (ESM PCF). The interferometric spectrum of the Fabry-Perot interferometer is collected by a charge coupled device linear array based micro spectrometer. A high-resolution demodulation algorithm is used to interrogate the peak wavelengths. Experimental results show that the temperature range of 1200 °C and the temperature resolution of 1 °C are achieved.

  13. Lensed fiber probes designed as an alternative to bulk probes in optical coherence tomography.

    Science.gov (United States)

    Ryu, Seon Young; Choi, Hae Young; Na, Jihoon; Choi, Woo June; Lee, Byeong Ha

    2008-04-01

    We demonstrate a compact all-fiber sampling probe for an optical coherence tomography (OCT) system. By forming a focusing lens directly on the tip of an optical fiber, a compact sampling probe could be implemented. To simultaneously achieve a sufficiently long working distance and a good lateral resolution, we employed a large-mode area photonic crystal fiber (PCF) and a coreless silica fiber (CSF) of the same diameters. A working distance of up to 1270 microm, a 3 dB distance range of 2210 microm, and a transverse resolution of 14.2 microm were achieved with the implemented PCF lensed fiber; these values are comparable to those obtainable with a conventional objective lens having an NA of 0.25 (10 x). The performance of the OCT system equipped with the proposed PCF lensed fiber is presented by showing the OCT images of a rat finger as a biological sample and a pearl as an in-depth sample.

  14. Grade-2 Teflon (AF1601) PCF for optical communication using 2D FDTD technique: a simplest design

    Science.gov (United States)

    Muduli, N.; Achary, J. S. N.; Padhy, Hemanta ku.

    2016-04-01

    A nonlinear ytterbium-doped rectangular proposed PCF structure of inner and outer cladding is used to analyze effective mode field area (Aeff), nonlinear coefficient (γ), dispersion (D), and confinement loss (CL) in a wide range of wavelength. The fabrication of PCF structure is due to different size doped air hole, pitch, and air hole diameter in a regular periodic geometrical array fashion. The various property of PCF structure such as mode field area, nonlinear coefficient, dispersion, and confinement loss are analyzed by implementing 2D FDTD technique. The above PCF property investigated using suitable parameters like Λ1, ?, ?, and ? in three different situations is discussed in simulation. The high nonlinear coefficient and dispersion property of PCF structure are tailored by setting the cladding parameter. However, highly nonlinear fibers with nonzero dispersion at the wavelength of 1.55 μm are very attractive for a range of optical communication application such as laser amplifier, pulse compression, wavelength conversion, all optical switching, and supercontinuum generation. So our newly proposed ytterbium-doped PCF seems to be most suitable exclusively for supercontinuum generation and nonlinear fiber optics. Finally, it is observed that ytterbium-doped Teflon (AF1601) PCF has more nonlinear coefficient (γ(λ) = 65.27 W-1 km-1) as compared to pure silica PCF (γ(λ) = 52 W-1 km-1) design to have same mode field area (Aeff) 1.7 μm2 at an operating wavelength of 1.55 μm.

  15. Tunable Photonic Band Gaps In Photonic Crystal Fibers Filled With a Cholesteric Liquid Crystal

    Institute of Scientific and Technical Information of China (English)

    Thomas; Tanggaard; Larsen; David; Sparre; Hermann; Anders; Bjarklev

    2003-01-01

    A photonic crystal fiber has been filled with a cholesteric liquid crystal. A temperature sensitive photonic band gap effect was observed, which was especially pronounced around the liquid crystal phase transition temperature.

  16. Fiber and Crystals Dual Readout calorimeters

    CERN Document Server

    Cascella, Michele; Lee, Sehwook

    2016-01-01

    The RD52 (DREAM) collaboration is performing R\\&D on dual readout calorimetry techniques with the aim of improving hadronic energy resolution for future high energy physics experiments. The simultaneous detection of Cherenkov and scintillation light enables us to measure the electromagnetic fraction of hadron shower event-by-event. As a result, we could eliminate the main fluctuation which prevented from achieving precision energy measurement for hadrons. We have tested the performance of the lead and copper fiber prototypes calorimeters with various energies of electromagnetic particles and hadrons. During the beam test, we investigated the energy resolutions for electrons and pions as well as the identification of those particles in a longitudinally unsegmented calorimeter. Measurements were also performed on pure and doped PbWO$_{4}$ crystals, as well as BGO and BSO, with the aim of realising a crystal based dual readout detector. We will describe our results, focusing on the more promising properties ...

  17. [Study on spectral gain characterization of FWM processes with multi-frequency pumps in photonic crystal fiber].

    Science.gov (United States)

    Hui, Zhan-Qiang

    2011-10-01

    Spectral gain induced by four-wave-mixing with multi-frequency pump was investigated by exploiting the data signal and continue lights co-propagation in dispersion flattened high nonlinear photonic crystal fiber (PCF). The effects of wavelength drift of pump lights, polarization state of orthogonal or parallel of pump lights, polarization mismatch of signal light versus orthogonal pump lights, total power of signal and probe light on the spectrum gain were analyzed. The results show that good FWM gain effects with multi-frequency pump can be obtained in 36.4 nm wavelength range when power ratio of pump to probe light is appropriate and with identical polarization. Furthermore, the gain of FWM with multi-frequency pump is very sensitive to polarization fluctuation and the different idle waves obtain different gain with the variation in signal polarization state. Moreover, the impact of pump numbers was investigated. The obtained results would be helpful for further research on ultrahigh-speed all optical signal processing devices exploiting the FWM with multi-frequency pump in PCF for future photonics network.

  18. Highly sensitive SERS detection of cancer proteins in low sample volume using hollow core photonic crystal fiber.

    Science.gov (United States)

    U S, Dinish; Fu, Chit Yaw; Soh, Kiat Seng; Ramaswamy, Bhuvaneswari; Kumar, Anil; Olivo, Malini

    2012-03-15

    Enzyme-linked immunosorbent assays (ELISA) are commonly used for detecting cancer proteins at concentration in the range of about ng-μg/mL. Hence it often fails to detect tumor markers at the early stages of cancer and other diseases where the amount of protein is extremely low. Herein, we report a novel photonic crystal fiber (PCF) based surface enhanced Raman scattering (SERS) sensing platform for the ultrasensitive detection of cancer proteins in an extremely low sample volume. As a proof of concept, epidermal growth factor receptors (EGFRs) in a lysate solution from human epithelial carcinoma cells were immobilized into the hollow core PCF. Highly sensitive detection of protein was achieved using anti-EGFR antibody conjugated SERS nanotag. This SERS nanotag probe was realized by anchoring highly active Raman molecules onto the gold nanoparticles followed by bioconjugation. The proposed sensing method can detect low amount of proteins at ∼100 pg in a sample volume of ∼10 nL. Our approach may lead to the highly sensitive protein sensing methodology for the early detection of diseases.

  19. Modified Raman Response Model and Supercontinuum Generation in Flat Dispersion Photonic Crystal Fiber with Two-Zero Dispersion Wavelengths

    Institute of Scientific and Technical Information of China (English)

    WANG He-Lin; YANG Ai-Jun; LENG Yu-Xin; WANG Cheng

    2011-01-01

    The generation mechanisms of supercontinuum(SC)and the effect of the modified Raman model on SC are further analyzed in a flat dispersion photonic crystal fiber(PCF)with two-zero dispersion wavelengths(TZDWs)by introducing an accurate Raman response function in the scalar nonlinear Scho?dinger equation.The results show that the introduction of Boson peak in the modified Raman gain model not only results in much rapider broadening of SC but also promotes more pump pulse energy transferred to the short wavelength region,which is related to stimulated Raman scattering.Moreover,SC generated from the PCF splits into two spectral bands,and their spectral peaks rapidly separate and broaden with the increase of incidcnt power.Double-band central wavelengths are finally located at about 850 nm and 1220 nm.The pumping energy depletion phenomenon occurs.The simulated results from the modified Raman model are in better agreement with the experimental results than that from the single-Lorentzian moder.

  20. A new design of photonic crystal fiber with ultra-flattened dispersion to simultaneously minimize the dispersion and confinement loss

    Science.gov (United States)

    Olyaee, Saeed; Taghipour, Fahimeh

    2011-02-01

    Photonic crystal fibers (PCFs) are highly suitable transmission media for wavelength-division-multiplexing (WDM) systems, in which low and ultra-flattened dispersion of PCFs is extremely desirable. It is also required to concurrently achieve both a low confinement loss as well as a large effective area in a wide range of wavelengths. Relatively low dispersion with negligible variation has become feasible in the wavelength range of 1.1 to 1.8μm through the proposed design in this paper. According to a new structure of PCF presented in this study, the dispersion slope is 6.8×10-4ps/km.nm2 and the confinement loss reaches below 10-6 dB/km in this range, while at the same time an effective area of more than 50μm2 has been attained. For the analysis of this PCF, finite-difference time-domain (FDTD) method with the perfectly matched layers (PML) boundary conditions has been used.

  1. Design of a porous cored hexagonal photonic crystal fiber based optical sensor with high relative sensitivity for lower operating wavelength

    Science.gov (United States)

    Sen, Shuvo; Chowdhury, Sawrab; Ahmed, Kawsar; Asaduzzaman, Sayed

    2017-03-01

    In this article, highly sensitive and low confinement loss enriching micro structured photonic crystal fiber (PCF) has been suggested as an optical sensor. The proposed PCF is porous cored hexagonal (P-HPCF) where cladding contains five layers with circular air holes and core vicinity is formed by two layered elliptical air holes. Two fundamental propagation characteristics such as the relative sensitivity and confinement loss of the proposed P-HPCF have been numerically scrutinized by the full vectorial finite element method (FEM) simulation procedure. The optimized values are modified with different geometrical parameters like diameters of circular or elliptical air holes, pitches of the core, and cladding region over a spacious assortment of wavelength from 0.8 µm to 1.8 µm. All pretending results exhibit that the relative sensitivity is enlarged according to decrement of wavelength of the transmission band (O+E+S+C+L+U). In addition, all useable liquids reveal the maximum sensitivity of 57.00%, 57.18%, and 57.27% for n=1.33, 1.354, and 1.366 respectively by lower band. Moreover, effective area, nonlinear coefficient, frequency, propagation constant, total electric energy, total magnetic energy, and wave number in free space of the proposed P-HPCF have been reported recently.

  2. Vacuum-UV to IR supercontinuum in hydrogen-filled photonic crystal fiber

    CERN Document Server

    Belli, Federico; Chang, Wonkeun; Travers, John C; Russell, Philip St J

    2015-01-01

    Although supercontinuum sources are readily available for the visible and near infrared, and recently also for the mid-IR, many areas of biology, chemistry and physics would benefit greatly from the availability of compact, stable and spectrally bright deep ultraviolet (DUV) and vacuum ultraviolet (VUV) supercontinuum sources. Such sources have however not yet been developed. Here we report the generation of a bright supercontinuum, spanning more than three octaves from 124 nm to beyond 1200 nm, in hydrogen-filled kagom\\'e-style hollow-core photonic crystal fiber (kagom\\'e-PCF). Few-{\\mu}J, 30 fs pump pulses at wavelength 805 nm are launched into the fiber, where they undergo self-compression via the Raman-enhanced Kerr effect. Modeling indicates that before reaching a minimum sub-cycle pulse duration of ~1 fs, much less than one period of molecular vibration (8 fs), nonlinear reshaping of the pulse envelope, accentuated by self-steepening and shock formation, creates an ultrashort feature that causes impulsi...

  3. All-optically tunable waveform synthesis by a silicon nanowaveguide ring resonator coupled with a photonic-crystal fiber frequency shifter

    KAUST Repository

    Savvin, Aleksandr D.

    2011-03-01

    A silicon nanowaveguide ring resonator is combined with a photonic-crystal fiber (PCF) frequency shifter to demonstrate an all-optically tunable synthesis of ultrashort pulse trains, modulated by ultrafast photoinduced free-carrier generation in the silicon resonator. Pump-probe measurements performed with a 50-fs, 625-nm second-harmonic output of a Cr:forsterite laser, used as a carrier-injecting pump, and a 1.50-1.56-μm frequency-tunable 100-fs soliton output of a photonic-crystal fiber, serving as a probe, resolve tunable ultrafast oscillatory features in the silicon nanowaveguide resonator response. © 2010 Elsevier B.V. All rights reserved.

  4. Crystal-free Formation of Non-Oxide Optical Fiber

    Science.gov (United States)

    Nabors, Sammy A.

    2015-01-01

    Researchers at NASA Marshall Space Flight Center have devised a method for the creation of crystal-free nonoxide optical fiber preforms. Non-oxide fiber optics are extensively used in infrared transmitting applications such as communication systems, chemical sensors, and laser fiber guides for cutting, welding and medical surgery. However, some of these glasses are very susceptible to crystallization. Even small crystals can lead to light scatter and a high attenuation coefficient, limiting their usefulness. NASA has developed a new method of non-oxide fiber formation that uses axial magnetic fields to suppress crystallization. The resulting non-oxide fibers are crystal free and have lower signal attenuation rates than silica based optical fibers.

  5. Liquid crystal parameter analysis for tunable photonic bandgap fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei;

    2010-01-01

    We investigate the tunability of splay-aligned liquid crystals for the use in solid core photonic crystal fibers. Finite element simulations are used to obtain the alignment of the liquid crystals subject to an external electric field. By means of the liquid crystal director field the optical per...

  6. Effect of frequency chirp on supercontinuum generation in photonic crystal fibers with two zero-dispersion wavelengths.

    Science.gov (United States)

    Zhang, Hua; Yu, Song; Zhang, Jie; Gu, Wanyi

    2007-02-05

    The effect of initial frequency chirp is investigated numerically to obtain efficient supercontinuum radiation in photonic crystal fibers (PCFs) with two closely spaced zero-dispersion wavelengths. The positive chirps, instead of zero or negative chirps, are recommended because self phase modulation and four-wave mixing can be facilitated by employing positive chirps. In contrast with the complicated and irregular spectrum generated by negative-chirped pulse, the spectrums generated by positive-chirped pulses are wider and much more regular. Moreover, the saturated length of the PCF, corresponding to the maximal spectrum width, can be shortened greatly and the efficiency of frequency conversion is also improved because of initial positive chirps. Nearly all the energy between the zero-dispersion wavelengths can be transferred to the normal dispersion region from the region within the two zero-dispersion wavelengths provided that the initial positive chirp is large enough.

  7. Polarization-dependent transverse-stress sensing based on photonic crystal fiber with gold-coated air-holes

    Science.gov (United States)

    Liu, Hai; Zhu, Chenghao; Wang, Yan; Tan, Ce; Li, Hongwei; Cheng, Deqiang

    2017-05-01

    A transverse-stress sensor with polarization filtering function based on a specially designed photonic crystal fiber (PCF) is proposed. Four ultralarge side-holes are introduced into the cladding layer, and two of them are gold-coated to enhance the stress sensitivity. The finite element method is applied to study the polarization-dependent wavelength-selective sensing characteristics at the optical communication wavelength. Results reveal that the sensor can achieve a high sensitivity in either direction that can be divided into an x-direction component and a y-direction component. Combining the advantages of side-hole structure and surface plasmon resonance technology, the proposed sensor is believed to be an excellent candidate for the transverse-stress measurement.

  8. Photonic crystal fiber design for broadband directional coupling

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper; Bang, Ole; Bjarklev, Anders Overgaard

    2004-01-01

    A novel design for a broadband directional coupler based on a photonic crystal fiber is investigated numerically. It is shown that suitable index-depressing doping of the core regions in an index-guiding twin-core photonic crystal fiber can stabilize the coupling coefficient between the cores over...

  9. Photonic crystal fiber design for broadband directional coupling

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper; Bang, Ole; Bjarklev, Anders Overgaard

    2004-01-01

    A novel design for a broadband directional coupler based on a photonic crystal fiber is investigated numerically. It is shown that suitable index-depressing doping of the core regions in an index-guiding twin-core photonic crystal fiber can stabilize the coupling coefficient between the cores over...

  10. Fiber and crystals dual readout calorimeters

    Science.gov (United States)

    Cascella, Michele; Franchino, Silvia; Lee, Sehwook

    2016-11-01

    The RD52 (DREAM) collaboration is performing R&D on dual readout calorimetry techniques with the aim of improving hadronic energy resolution for future high energy physics experiments. The simultaneous detection of Cherenkov and scintillation light enables us to measure the electromagnetic fraction of hadron shower event-by-event. As a result, we could eliminate the main fluctuation which prevented from achieving precision energy measurement for hadrons. We have tested the performance of the lead and copper fiber prototypes calorimeters with various energies of electromagnetic particles and hadrons. During the beam test, we investigated the energy resolutions for electrons and pions as well as the identification of those particles in a longitudinally unsegmented calorimeter. Measurements were also performed on pure and doped PbWO4 crystals, as well as BGO and BSO, with the aim of realizing a crystal based dual readout detector. We will describe our results, focusing on the more promising properties of homogeneous media for the technique. Guidelines for additional developments on crystals will be also given. Finally we discuss the construction techniques that we have used to assemble our prototypes and give an overview of the ones that could be industrialized for the construction of a full hermetic calorimeter.

  11. Optical fiber tips functionalized with semiconductor photonic crystal cavities

    CERN Document Server

    Shambat, Gary; Rivoire, Kelley; Sarmiento, Tomas; Harris, James; Vuckovic, Jelena

    2011-01-01

    We demonstrate a simple and rapid epoxy-based method for transferring photonic crystal cavities to the facets of optical fibers. Passive Si cavities were measured via fiber taper coupling as well as direct transmission from the fiber facet. Active quantum dot containing GaAs cavities showed photoluminescence that was collected both in free space and back through the original fiber. Cavities maintain a high quality factor (2000-4000) in both material systems. This new design architecture provides a practical mechanically stable platform for the integration of photonic crystal cavities with macroscale optics and opens the door for novel research on fiber-coupled cavity devices.

  12. Using graphene nano-particle embedded in photonic crystal fiber for evanescent wave mode-locking of fiber laser.

    Science.gov (United States)

    Lin, Yung-Hsiang; Yang, Chun-Yu; Liou, Jia-Hong; Yu, Chin-Ping; Lin, Gong-Ru

    2013-07-15

    A photonic crystal fiber (PCF) with high-quality graphene nano-particles uniformly dispersed in the hole cladding are demonstrated to passively mode-lock the erbium-doped fiber laser (EDFL) by evanescent-wave interaction. The few-layer graphene nano-particles are obtained by a stabilized electrochemical exfoliation at a threshold bias. These slowly and softly exfoliated graphene nano-particle exhibits an intense 2D band and an almost disappeared D band in the Raman scattering spectrum. The saturable phenomena of the extinction coefficient β in the cladding provides a loss modulation for the intracavity photon intensity by the evanescent-wave interaction. The evanescent-wave mode-locking scheme effectively enlarges the interaction length of saturable absorption with graphene nano-particle to provide an increasing transmittance ΔT of 5% and modulation depth of 13%. By comparing the core-wave and evanescent-wave mode-locking under the same linear transmittance, the transmittance of the graphene nano-particles on the end-face of SMF only enlarges from 0.54 to 0.578 with ΔT = 3.8% and the modulation depth of 10.8%. The evanescent wave interaction is found to be better than the traditional approach which confines the graphene nano-particles at the interface of two SMF patchcords. When enlarging the intra-cavity gain by simultaneously increasing the pumping current of 980-nm and 1480-nm pumping laser diodes (LDs) to 900 mA, the passively mode-locked EDFL shortens its pulsewidth to 650 fs and broadens its spectral linewidth to 3.92 nm. An extremely low carrier amplitude jitter (CAJ) of 1.2-1.6% is observed to confirm the stable EDFL pulse-train with the cladding graphene nano-particle based evanescent-wave mode-locking.

  13. Coupling Mode of Dual-Core Micro Structured Fibers

    CERN Document Server

    Debbal, Mohammed

    2015-01-01

    The photonic crystal fibers (PCF) or air-silica microstructured fibers consist of a periodic array of dielectric transverse. By introducing a defect in this structure, it is possible to guide the light by a photonic bandgap effect, whose properties are different fundamentally from the guide by total internal reflection that takes place in conventional fibers. PCF with two cores have significant potential, and this is one of the main motivations witches led us to approach this theme in this article. Analysis of the inter-core coupling was also necessary to study the problem of crosstalk. Their knowledge is important because it is a preliminary work to the study and understanding of multi-core PCF or an array of guides in the microstructured cladding. It then presents the main results on the effects of beating between the various modes under linear conditions.

  14. Fiber field-effect device via in situ channel crystallization.

    Science.gov (United States)

    Danto, Sylvain; Sorin, Fabien; Orf, Nicholas D; Wang, Zheng; Speakman, Scott A; Joannopoulos, John D; Fink, Yoel

    2010-10-01

    The in situ crystallization of the incorporated amorphous semiconductor within the multimaterial fiber device yields a large decrease in defect density and a concomitant five-order-of-magnitude decrease in resistivity of the novel metal-insulator-crystalline semiconductor structure. Using a post-drawing crystallization process, the first tens-of-meters-long single-fiber field-effect device is demonstrated. This work opens significant opportunities for incorporating higher functionality in functional fibers and fabrics.

  15. Polarization modulation instability in photonic crystal fibers.

    Science.gov (United States)

    Kruhlak, R J; Wong, G K; Chen, J S; Murdoch, S G; Leonhardt, R; Harvey, J D; Joly, N Y; Knight, J C

    2006-05-15

    Polarization modulation instability (PMI) in birefringent photonic crystal fibers has been observed in the normal dispersion regime with a frequency shift of 64 THz between the generated frequencies and the pump frequency. The generated sidebands are orthogonally polarized to the pump. From the observed PMI frequency shift and the measured dispersion, we determined the phase birefringence to be 5.3 x 10(-5) at a pump wavelength of 647.1 nm. This birefringence was used to estimate the PMI gain as a function of pump wavelength. Four-wave mixing experiments in both the normal and the anomalous dispersion regimes generated PMI frequency shifts that show good agreement with the predicted values over a 70 THz range. These results could lead to amplifiers and oscillators based on PMI.

  16. Birefringent hollow core fibers

    DEFF Research Database (Denmark)

    Roberts, John

    2007-01-01

    Hollow core photonic crystal fiber (HC-PCF), fabricated according to a nominally non-birefringent design, shows a degree of un-controlled birefringence or polarization mode dispersion far in excess of conventional non polarization maintaining fibers. This can degrade the output pulse in many...... and an increased overlap between the polarization modes at the glass interfaces. The interplay between these effects leads to a wavelength for optimum polarization maintenance, lambda(PM), which is detuned from the wavelength of highest birefringence. By a suitable fiber design involving antiresonance of the core...

  17. Birefringent hollow core fibers

    DEFF Research Database (Denmark)

    Roberts, John

    2007-01-01

    Hollow core photonic crystal fiber (HC-PCF), fabricated according to a nominally non-birefringent design, shows a degree of un-controlled birefringence or polarization mode dispersion far in excess of conventional non polarization maintaining fibers. This can degrade the output pulse in many...... and an increased overlap between the polarization modes at the glass interfaces. The interplay between these effects leads to a wavelength for optimum polarization maintenance, lambda(PM), which is detuned from the wavelength of highest birefringence. By a suitable fiber design involving antiresonance of the core...

  18. Random Fiber Laser

    CERN Document Server

    de Matos, Christiano J S; Brito-Silva, Antônio M; Gámez, M A Martinez; Gomes, Anderson S L; de Araújo, Cid B

    2007-01-01

    We investigate the effects of two dimensional confinement on the lasing properties of a classical random laser system operating in the incoherent feedback (diffusive) regime. A suspension of 250nm rutile (TiO2) particles in a Rhodamine 6G solution was inserted into the hollow core of a photonic crystal fiber (PCF) generating the first random fiber laser and a novel quasi-one-dimensional RL geometry. Comparison with similar systems in bulk format shows that the random fiber laser presents an efficiency that is at least two orders of magnitude higher.

  19. Efficient spectral broadening in the 100-W average power regime using gas-filled kagome HC-PCF and pulse compression.

    Science.gov (United States)

    Emaury, Florian; Saraceno, Clara J; Debord, Benoit; Ghosh, Debashri; Diebold, Andreas; Gèrôme, Frederic; Südmeyer, Thomas; Benabid, Fetah; Keller, Ursula

    2014-12-15

    We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core kagome hollow-core photonic crystal fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a kagome HC-PCF containing 13 bar of static argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100  W of average power and >100  MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100  MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance.

  20. Electrially tunable photonic bandgap guidance in a liquid crystal filled photonic crystal fiber

    DEFF Research Database (Denmark)

    Haakestad, Magnus W.; Alkeskjold, Thomas Tanggaard; Nielsen, Martin Dybendal;

    2005-01-01

    Tunable bandgap guidance is obtained by filling the holes of a solid core photonic crystal fiber with a nematic liquid crystal and applying an electric field. The response times are measured and found to be in the millisecond range.......Tunable bandgap guidance is obtained by filling the holes of a solid core photonic crystal fiber with a nematic liquid crystal and applying an electric field. The response times are measured and found to be in the millisecond range....

  1. Detection of amino acid neurotransmitters by surface enhanced Raman scattering and hollow core photonic crystal fiber

    Science.gov (United States)

    Tiwari, Vidhu S.; Khetani, Altaf; Monfared, Ali Momenpour T.; Smith, Brett; Anis, Hanan; Trudeau, Vance L.

    2012-03-01

    The present work explores the feasibility of using surface enhanced Raman scattering (SERS) for detecting the neurotransmitters such as glutamate (GLU) and gamma-amino butyric acid (GABA). These amino acid neurotransmitters that respectively mediate fast excitatory and inhibitory neurotransmission in the brain, are important for neuroendocrine control, and upsets in their synthesis are also linked to epilepsy. Our SERS-based detection scheme enabled the detection of low amounts of GLU (10-7 M) and GABA (10-4 M). It may complement existing techniques for characterizing such kinds of neurotransmitters that include high-performance liquid chromatography (HPLC) or mass spectrography (MS). This is mainly because SERS has other advantages such as ease of sample preparation, molecular specificity and sensitivity, thus making it potentially applicable to characterization of experimental brain extracts or clinical diagnostic samples of cerebrospinal fluid and saliva. Using hollow core photonic crystal fiber (HC-PCF) further enhanced the Raman signal relative to that in a standard cuvette providing sensitive detection of GLU and GABA in micro-litre volume of aqueous solutions.

  2. Growth of single-crystal YAG fiber optics.

    Science.gov (United States)

    Nie, Craig D; Bera, Subhabrata; Harrington, James A

    2016-07-11

    Single-crystal YAG (Y3Al5O12) fibers have been grown by the laser heated pedestal growth technique with losses as low as 0.3 dB/m at 1.06 μm. These YAG fibers are as long as about 60 cm with diameters around 330 μm. The early fibers were grown from unoriented YAG seed fibers and these fibers exhibited facet steps or ridges on the surface of the fiber. However, recently we have grown fibers using an oriented seed to grow step-free fibers. Scattering losses made on the fibers indicate that the scattering losses are equal to about 30% of the total loss.

  3. Microjoule sub-10 fs VUV pulse generation by MW pump pulses using highly efficient chirped four-wave mixing in hollow-core photonic crystal fibers

    Science.gov (United States)

    Im, Song-Jin

    2015-03-01

    We theoretically study chirped four-wave mixing for VUV pulse generation in hollow-core photonic crystal fibers. We predict the generation of sub-10 fs VUV pulses with energy of up to hundreds of µJ by broad-band chirped idler pulses at 830 nm and MW pump pulses with narrow-band at 277 nm. The MW pump could be desirable to reduce the complexity of the laser system or use a high repetition rate laser system. The energy conversion efficiency from pump pulse to VUV pulse reaches to 30% . This generation can be realized in a kagome-lattice hollow-core PCF filled with noble gas of high pressure with core diameter less than 40 µm, which would enable technically simple or highly efficient coupling to the fundamental mode of the fiber.

  4. Micro-joule sub-10-fs VUV pulse generation by MW pump pulse using highly efficient chirped-four-wave mixing in hollow-core photonic crystal fibers

    CERN Document Server

    Im, Song-Jin

    2013-01-01

    We theoretically study chirped four-wave mixing for VUV pulse generation in hollow-core photonic crystal fibers. We predict the generation of sub-10-fs VUV pulses with energy of up to hundreds of microjoule by broad-band chirped idler pulses at 830 nm and MW pump pulses with narrow-band at 277 nm. MW pump could be desirable to reduce the complexity of the laser system or use a high repetition rate-laser system. The energy conversion efficiency from pump pulse to VUV pulse reaches to 30%. This generation can be realized in kagome-lattice hollow-core PCF filled with noble gas of high pressure with core-diameter less than 40 micrometers which would enable technically simple or highly efficient coupling to fundamental mode of the fiber.

  5. Photonic crystal fibers for supercontinuum generation pumped by a gain-switched CW fiber laser

    DEFF Research Database (Denmark)

    Larsen, Casper; Noordegraaf, Danny; Hansen, Kim P.

    2012-01-01

    Supercontinuum generation in photonics crystal fibers (PCFs) pumped by CW lasers yields high spectral power density and average power. However, such systems require very high pump power and long nonlinear fibers. By on/off modulating the pump diodes of the fiber laser, the relaxation oscillations...

  6. Fabrication of fiber-embedded multi-core photonic crystal fibers

    Institute of Scientific and Technical Information of China (English)

    Weimin Sun; Xiaoqi Liu; Fenghua Fu; Jianzhong Zhang

    2008-01-01

    @@ A novel fabrication method of multi-core photonic crystal fibers is proposed on the basis of a fiberembedded technique. A taper tower is used to modify the structures of the fiber preform, and four steps of fiber fabrication and different structures of fiber samples are given. The mode structures and beating characteristics of a photonic crystal fiber sample with two successive cores are investigated in detail with the help of a supercontinuum light source, a charge-coupled device (CCD) camera, and an optical spectrum analyzer. The test results show a clear beating phenomenon between two orthotropic polarization modes with a 2.8-nm peak interval in wavelength.

  7. Sub-picosecond double-clad photonic crystal fiber oscillator and amplifier system

    Science.gov (United States)

    Li, Pingxue; Zhang, Mengmeng; Liang, Boxing; Chi, Junjie

    2015-08-01

    A ytterbium-doped large mode area PCF sub-picosecond laser oscillator and amplifier system is experimentally studied. The oscillator which combines NPE and SESAM is operating on the all-normal-dispersion regime and the LMA PCF is used as the gain medium. In the CW mode-locking regime, the oscillator directly generates the pulse at the repetition rate of 83.7 MHz while the pulse duration is 960 fs. The double-clad fiber amplifier system directly generates a high average power of 12.53 W with a pulse duration of 4.1 ps corresponding to the pulse energy of 150 nJ and peak power of 36.6 KW after about 3 m ytterbium doped double clad fiber amplification.

  8. Crystal structure of fiber structured pentacene thin films

    OpenAIRE

    2007-01-01

    This PhD thesis presents a technique based on the grazing incidence crystal truncation rod (GI-CTR) X-ray diffraction method used to solve the crystal structure of substrate induced fiber structured organic thin films. The crystal structures of pentacene thin films grown on technologically relevant gate dielectric substrates are reported. It is widely recognized, that the intrinsic charge transport properties in organic thin film transistors (OTFTs) depend strongly on the crystal structur...

  9. Tunable vacuum-UV to visible ultrafast pulse source based on gas-filled Kagome-PCF.

    Science.gov (United States)

    Mak, Ka Fai; Travers, John C; Hölzer, Philipp; Joly, Nicolas Y; Russell, Philip St J

    2013-05-06

    An efficient and tunable 176-550 nm source based on the emission of resonant dispersive radiation from ultrafast solitons at 800 nm is demonstrated in a gas-filled hollow-core photonic crystal fiber (PCF). By careful optimization and appropriate choice of gas, informed by detailed numerical simulations, we show that bright, high quality, localized bands of UV light (relative widths of a few percent) can be generated at all wavelengths across this range. Pulse energies of more than 75 nJ in the deep-UV, with relative bandwidths of ~3%, are generated from pump pulses of a few μJ. Excellent agreement is obtained between numerical and experimental results. The effects of positive and negative axial pressure gradients are also experimentally studied, and the coherence of the deep-UV dispersive wave radiation numerically investigated.

  10. Optical tuning of photonic bandgaps in dye-doped nematic liquid crystal photonic crystal fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard; Hermann, David Sparre;

    2005-01-01

    An all-optical modulator is demonstrated, which utilizes a pulsed 532 nm laser to modulate the spectral position of the bandgaps in a photonic crystal fiber infiltrated with a dye-doped nematic liquid crystal. In order to investigate the time response of the LCPBG fiber device, a low-power CW probe...

  11. Tunable nonlinear beam defocusing in infiltrated photonic crystal fibers

    DEFF Research Database (Denmark)

    Rosberg, Christian Romer; Bennet, Francis H; Neshev, Dragomir N.;

    2007-01-01

    We demonstrate a novel experimental platform for discrete nonlinear optics based on infiltrated photonic crystal fibers. We observe tunable discrete diffraction and nonlinear self-defocusing, and apply the effects to realize a compact all-optical power limiter....

  12. Highly efficient fluorescence sensing with hollow core photonic crystal fibers

    OpenAIRE

    Smolka, Stephan; Barth, Michael; Benson, Oliver

    2008-01-01

    We investigate hollow core photonic crystal fibers for ultra-sensitive fluorescence detection by selectively infiltrating the central hole with fluorophores. Dye concentrations down to 10(-9) M can be detected using only nanoliter sample volumes.

  13. Photonic crystal fiber-based surface plasmon resonance sensor with selective analyte channels and graphene-silver deposited core.

    Science.gov (United States)

    Rifat, Ahmmed A; Mahdiraji, G Amouzad; Chow, Desmond M; Shee, Yu Gang; Ahmed, Rajib; Adikan, Faisal Rafiq Mahamd

    2015-05-19

    We propose a surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) with selectively filled analyte channels. Silver is used as the plasmonic material to accurately detect the analytes and is coated with a thin graphene layer to prevent oxidation. The liquid-filled cores are placed near to the metallic channel for easy excitation of free electrons to produce surface plasmon waves (SPWs). Surface plasmons along the metal surface are excited with a leaky Gaussian-like core guided mode. Numerical investigations of the fiber's properties and sensing performance are performed using the finite element method (FEM). The proposed sensor shows maximum amplitude sensitivity of 418 Refractive Index Units (RIU-1) with resolution as high as 2.4 × 10(-5) RIU. Using the wavelength interrogation method, a maximum refractive index (RI) sensitivity of 3000 nm/RIU in the sensing range of 1.46-1.49 is achieved. The proposed sensor is suitable for detecting various high RI chemicals, biochemical and organic chemical analytes. Additionally, the effects of fiber structural parameters on the properties of plasmonic excitation are investigated and optimized for sensing performance as well as reducing the sensor's footprint.

  14. Highly efficient fluorescence sensing with hollow core photonic crystal fibers

    DEFF Research Database (Denmark)

    Smolka, Stephan; Barth, Michael; Benson, Oliver

    2008-01-01

    We investigate hollow core photonic crystal fibers for ultra-sensitive fluorescence detection by selectively infiltrating the central hole with fluorophores. Dye concentrations down to 10(-9) M can be detected using only nanoliter sample volumes.......We investigate hollow core photonic crystal fibers for ultra-sensitive fluorescence detection by selectively infiltrating the central hole with fluorophores. Dye concentrations down to 10(-9) M can be detected using only nanoliter sample volumes....

  15. Highly Birefringent Photonic Crystal Fibers BUsing Asymmetric Core Design

    Institute of Scientific and Technical Information of China (English)

    Zhao Chun-Liu; Lu Chao; Yan Min; Wang Xiaoyan; Lou Junjun; Li Qin; Zhou Xiaoqun; Cai Qing; P.R.Chaudhuri

    2003-01-01

    We demonstrate a highly birefringent photonic crystal fiber by utilizing the asymmetric core design. Based on spectral measurements of the polarization mode interfering, we estimate that the fiber has a beat length of about 0.33 mm at 1545 nm.

  16. Soft-glass hollow-core photonic crystal fibers

    Science.gov (United States)

    Melnikov, Leonid; Khromova, Irina; Scherbakov, Andrey; Nikishin, Nikolay

    2005-09-01

    The results of numerical modeling and experimental investigations of manufactured diamond-shaped and large area hollow core photonic crystal fibers with periodical cladding (kagome-lattice and closely packed tubes) are presented. The use of soft glasses allows to fabricate high-quality structures with moderate losses. Numerical methods, designing strategies and fabrication issues of these promising fiber structures are discussed.

  17. Polymer PCF Bragg grating sensors based on poly(methyl methacrylate) and TOPAS cyclic olefin copolymer

    DEFF Research Database (Denmark)

    Johnson, Ian P; Webb, David J; Kalli, Kyriacos

    2011-01-01

    mode PCF with a core diameter of 6μm based on TOPAS cyclic olefin copolymer. Bragg grating inscription was achieved using a 30mW continuous wave 325nm helium cadmium laser. Both TOPAS and PMMA fibre have a large attenuation of around 1dB/cm in the 1550nm spectral region, limiting fibre lengths...... the possibility to manufacture multiplexed Bragg sensors in POF using a single phase mask in the UV inscription manufacturing. TOPAS holds certain advantages over PMMA including a much lower affinity for water, this should allow for the elimination of cross-sensitivity to humidity when monitoring temperature......Fibre Bragg grating (FBG) sensors have been fabricated in polymer photonic crystal fibre (PCF). Results are presented using two different types of polymer optical fibre (POF); first multimode PCF with a core diameter of 50μm based on poly(methyl methacrylate) (PMMA) and second, endlessly single...

  18. High dno/dT liquid crystals and their applications in a thermally tunable liquid crystal photonic crystal fiber

    DEFF Research Database (Denmark)

    Li, J.; Gauza, S.; Wu, S.-T.

    2006-01-01

    crystal mixtures, designated as UCF-1 and UCF-2. The dn(o)/dT of UCF-1 is similar to 4x higher than that of 5CB at room temperature. By infiltrating UCF-1 into the air holes of a three-rod core photonic crystal fiber, we demonstrate a thermally tunable photonic bandgap fiber with tuning sensitivity of 27...

  19. Research on the Photonic Crystal Fiber- based Sensors%新型光子晶体光纤传感器的基础研究

    Institute of Scientific and Technical Information of China (English)

    陆颖; 姚建铨; 毕卫红; 齐跃峰

    2016-01-01

    C。此外,根据不同的溶液配比,该种传感器呈现可调谐的温度灵敏区间。(5)对由光子晶体光纤光栅组成的新型生物传感器特性进行了研究,重点对光纤结构参数(空气孔直径和孔间距)、光栅参数(光栅周期和周期个数)、塌缩程度和塌缩方式对谐振波长的影响进行了分析,研究结果表明,随着空气孔直径的增大、孔间距的减小、光栅周期的增大和塌缩程度的减小,其谐振波长向短波方向发生漂移,随着周期个数的增大,其谐振波长未发生明显漂移。%Photonic crystal fiber (PCF) has become the research focus in the field of sensors with the unique advantages of that it can be designed flexibly and exhibits a high sensitivity for the change of the filled gas, liquid, and metal-based nanomaterials. This subject has analyzed the spectral and temperature sensing characteristics of PCF with different materials by changing the structure parameters and the factors related to the surrounding environment. The results show that PCF based sensors is promising for related applications.(1)A surface plasmon resonance (SPR) refractive index (RI) sensor based on ytterbium-doped PCF filled with metal nanowires and analyte is proposed. With the proposed sensor, the output power of the ytterbium-doped PCF laser can be influenced obviously by a bit change of the refraction index of analyte in the air holes to achieve the intra-cavity fiber sensing. This PCF sensing system has great practical value and significance for their advantages of compact structure and high sensitivity.(2)A SPR temperature sensor based on PCF with silver nanowires is designed and investigated experimentally. The results show that the temperature sensitivity is as high as 3.5nm/℃ with the experiment, which can provide reference for the implementation and application of PCF-based SPR temperature sensor or other PCF-based SPR sensing.(3)An intra-cavity sensor based on a dual

  20. Temperature-independent refractometer based on fiber-optic Fabry-Perot interferometer

    Science.gov (United States)

    Li, Jiacheng; Qiao, Xueguang; Wang, Ruohui; Rong, Qiangzhou; Bao, Weijia; Shao, Zhihua; Yang, Tingting

    2016-04-01

    A miniature fiber-optic refractometer based on Fabry-Perot interferometer (FPI) has been proposed and experimentally demonstrated. The sensing head consists of a short section of photonics crystal fiber (PCF) spliced to a single mode fiber (SMF), in which the end-face of the PCF is etched to remove holey structure with hydrofluoric (HF) acid. A Fabry-Perot interference spectrum is achieved based on the reflections from the fusion splicing interface and the end-face of the core of PCF. The interference fringe is sensitive to the external refractive index (RI) with an intensity-referenced sensitivity of 358.27 dB/RIU ranging from 1.33 to 1.38. The sensor has also been implemented for the concentration measurement of λ-phage DNA solution. In addition, the dip intensity is insensitive to the ambient temperature variation, making it a good candidate for temperature-independent bio-sensing area.

  1. Photosensitive, all-glass AgPO3/silicaphotonic bandgap fiber.

    Science.gov (United States)

    Konidakis, Ioannis; Zito, Gianluigi; Pissadakis, Stavros

    2012-07-01

    Photonic bandgap (PBG) guidance is observed in a solid core photonic crystal fiber (PCF) consisting of silver metaphosphate (AgPO(3)) glass embedded into a silica cladding, realized by vacuum-assisted infiltration of the molten glass into the hollow channels of a commercial silica PCF. Morphologic analysis of the cladding microstructure by optical and scanning electron microscopy reveals the formation of highly homogeneous glass strands along the PCF length. The characteristic transmission spectrum of the fiber shows PBG guidance in the range between 350 and 1650 nm. The exposure of the cladding glass matrix, using 355 nm, 150 ps laser irradiation, allows photo-induced enhancement of the transmission-to-stop-band extinction ratio by ∼60 dB/cm and bandwidth tuning. Numerical calculations of the transmission pattern of the fabricated AgPO(3)/silica bandgap fiber are in good agreement with experiments.

  2. Inhibited coupling hollow-core photonic crystal fiber

    Science.gov (United States)

    Benabid, F.; Gérôme, F.; Vincetti, L.; Debord, B.; Alharbi, M.; Bradley, T.

    2014-02-01

    We review the recent progress on the enhanced inhibited coupling in kagome hollow-core photonic crystal fiber by introducing negative curvature in the fiber-core shape. We show that increasing the hypocycloid contour curvature leads to a dramatic decrease in transmission loss and optical overlap with the silica surround and to a single modedness. Fabricated hypocycloid-core hollow-core photonic crystal fibers with a transmission loss in the range of 20-40 dB/km and for a spectral range of 700 nm-2000 nm have now become typical.

  3. A new structure of photonic crystal fiber with high sensitivity, high nonlinearity, high birefringence and low confinement loss for liquid analyte sensing applications

    Directory of Open Access Journals (Sweden)

    Md. Faizul Huq Arif

    2017-02-01

    Full Text Available This paper proposes the design and optimization of microstructure optical fiber for liquid sensing applications. A number of propagation characteristics have been compared between two formations of hexagonal cladding of our proposed PCF structure. The core of the proposed PCF structure is designed with two rows of supplementary elliptical air holes. We investigate the performance of the designed PCFs for Ethanol as a liquid sample to be sensed. Numerical analysis is carried out by employing the full vectorial Finite Element Method (FEM to examine the modal birefringence, confinement loss, relative sensitivity and nonlinear coefficient of the proposed PCF structure.

  4. Chromatic dispersion of liquid crystal infiltrated capillary tubes and photonic crystal fibers

    DEFF Research Database (Denmark)

    Rasmussen, Per Dalgaard; Lægsgaard, Jesper; Bang, Ole

    2006-01-01

    We consider chromatic dispersion of capillary tubes and photonic crystal fibers infiltrated with liquid crystals. A perturbative scheme for inclusion of material dispersion of both liquid crystal and the surrounding waveguide material is derived. The method is used to calculate the chromatic disp...

  5. Low-loss rotated porous core hexagonal single-mode fiber in THz regime

    DEFF Research Database (Denmark)

    Islam, Raonaqul; Hasanuzzaman, G.K.M.; Habib, Selim;

    2015-01-01

    A kind of porous core photonic crystal fiber (PCF) for terahertz (THz) wave propagation is proposed in thispaper. By intentionally rotating the porous core lattice structure, a dispersion of 1.06 ± 0.12 ps/THz/cm ina frequency range of 0.5–1.08 THz is observed. Also, a very low material absorption...

  6. Mg-ion indiffusion of lithium niobate single crystal fiber

    Institute of Scientific and Technical Information of China (English)

    阙文修; 姚熹; 霍玉晶

    1995-01-01

    A core-cladding waveguide structure of lithium niobate single crystal fiber with different refractive index profiles has been obtained by using an Mg-ion indiffusion process. The propagation loss of the dadded crystal fiber is measured to be 14 times as low as that of the undadded crystal fibers. Mechanisms of Mg-ion indiffusion and reasons of lattice distortion are analyzed and discussed. It is found by X-ray diffraction analysis as well as scanning electron microscopy that MgO-rich layer in the magnesium diffused surface exhibits the crystal structure of a new compound from the Li-Mg-Nb-O ternary system. It is proposed, for the first time, that this new compound in MgO-rich layer is the real source of Mg-ion indiffusion lithium niobate.

  7. Predicting macrobending loss for large-mode area photonic crystal fibres

    DEFF Research Database (Denmark)

    Nielsen, Martin D.; Mortensen, Niels Asger; Albertsen, Maja

    2004-01-01

    We report on an easy-to-evaluate expression for the prediction of the bend-loss for a large mode area photonic crystal fiber (PCF) with a triangular air-hole lattice. The expression is based on a recently proposed formulation of the V-parameter for a PCF and contains no free parameters. The valid....... The validity of the expression is verified experimentally for varying fiber parameters as well as bend radius. The typical deviation between the position of the measured and the predicted bend loss edge is within measurement uncertainty....

  8. All-Optical Signal processing using Highly Nonlinear Photonic Crystal Fiber

    DEFF Research Database (Denmark)

    Andersen, Peter Andreas

    2006-01-01

    The use of HNL-PCF in optical communication systems has been investigated in this thesis. The investigation has been done with respect to the future of telecommunications in an all-optical system. The PCFs used have all been used for all-optical signal processing as part of an optical component...... and the possibility of large differences between the refractive indices of the core and the cladding by using air-holes, makes PCFs suited for custom made components. By testing a HNL-PCF as a medium for supercontinuum generation at various dispersion values and at the same time using that supercontinuum...... of modulation format of the signal. The modulation format is also dependent on transmission in the optical system and dependent on the pulse source used to generate the supercontinuum. It is believed that by satisfying strict demands on the pulse sources and the fiber design, could the use of a supercontinuum...

  9. High-resolution wavefront shaping with a photonic crystal fiber for multimode fiber imaging

    NARCIS (Netherlands)

    Amitonova, L. V.; Descloux, A.; Petschulat, J.; Frosz, M. H.; Ahmed, G.; Babic, F.; Jiang, X.; Mosk, A. P.; Russell, P. S. J.; Pinkse, P.W.H.

    2016-01-01

    We demonstrate that a high-numerical-aperture photonic crystal fiber allows lensless focusing at an unparalleled res- olution by complex wavefront shaping. This paves the way toward high-resolution imaging exceeding the capabilities of imaging with multi-core single-mode optical fibers. We analyze t

  10. Tunable All-in-Fiber Waveplates Based on Negative Dielectric Liquid Crystal Photonic Bandgap Fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Eskildsen, Lars; Weirich, Johannes;

    2008-01-01

    Tunable all-in-fiber waveplates based on negative dielectric liquid crystal photonic bandgap fibers are presented. The birefringence can be tuned electrically and thermally to work as a quarter-wave or a half-wave plate in the range 1520 nm-1580 nm....

  11. High-resolution wavefront shaping with a photonic crystal fiber for multimode fiber imaging

    NARCIS (Netherlands)

    Amitonova, L. V.; Descloux, A.; Petschulat, J.; Frosz, M. H.; Ahmed, G.; Babic, F.; Jiang, X.; Mosk, A. P.; Russell, P. S. J.; Pinkse, P.W.H.

    2016-01-01

    We demonstrate that a high-numerical-aperture photonic crystal fiber allows lensless focusing at an unparalleled res- olution by complex wavefront shaping. This paves the way toward high-resolution imaging exceeding the capabilities of imaging with multi-core single-mode optical fibers. We analyze t

  12. Fiber Bragg Gratings in Small-Core Ge-Doped Photonic Crystal Fibers

    Institute of Scientific and Technical Information of China (English)

    Yiping Wang; Hartmut Bartelt; Wolfgang Ecke; Reinhardt Willsch; Jens Kobelke; Michael Kautz; Sven Brueckner; Manfred Rothhardt

    2008-01-01

    This paper reports fiber Bragg gratings (FBGs) inscribed in a small-core Ge-doped photonic crystal fibers with a UV laser and a Talbot inter-ferometer. The responses of such FBGs to temper-ature, strain, bending, and transverse-loading were systematically investigated. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and trans-verse-loading. The bending and transverse- loading properties of the FBGs are sensitive to the fiber orientations.

  13. Photonic Crystal Fiber-Based Surface Plasmon Resonance Sensor with Selective Analyte Channels and Graphene-Silver Deposited Core

    Directory of Open Access Journals (Sweden)

    Ahmmed A. Rifat

    2015-05-01

    Full Text Available We propose a surface plasmon resonance (SPR sensor based on photonic crystal fiber (PCF with selectively filled analyte channels. Silver is used as the plasmonic material to accurately detect the analytes and is coated with a thin graphene layer to prevent oxidation. The liquid-filled cores are placed near to the metallic channel for easy excitation of free electrons to produce surface plasmon waves (SPWs. Surface plasmons along the metal surface are excited with a leaky Gaussian-like core guided mode. Numerical investigations of the fiber’s properties and sensing performance are performed using the finite element method (FEM. The proposed sensor shows maximum amplitude sensitivity of 418 Refractive Index Units (RIU−1 with resolution as high as 2.4 × 10−5 RIU. Using the wavelength interrogation method, a maximum refractive index (RI sensitivity of 3000 nm/RIU in the sensing range of 1.46–1.49 is achieved. The proposed sensor is suitable for detecting various high RI chemicals, biochemical and organic chemical analytes. Additionally, the effects of fiber structural parameters on the properties of plasmonic excitation are investigated and optimized for sensing performance as well as reducing the sensor’s footprint.

  14. Photonic Crystal Fiber-Based Surface Plasmon Resonance Sensor with Selective Analyte Channels and Graphene-Silver Deposited Core

    Science.gov (United States)

    Rifat, Ahmmed A.; Mahdiraji, G. Amouzad; Chow, Desmond M.; Shee, Yu Gang; Ahmed, Rajib; Adikan, Faisal Rafiq Mahamd

    2015-01-01

    We propose a surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) with selectively filled analyte channels. Silver is used as the plasmonic material to accurately detect the analytes and is coated with a thin graphene layer to prevent oxidation. The liquid-filled cores are placed near to the metallic channel for easy excitation of free electrons to produce surface plasmon waves (SPWs). Surface plasmons along the metal surface are excited with a leaky Gaussian-like core guided mode. Numerical investigations of the fiber’s properties and sensing performance are performed using the finite element method (FEM). The proposed sensor shows maximum amplitude sensitivity of 418 Refractive Index Units (RIU−1) with resolution as high as 2.4 × 10−5 RIU. Using the wavelength interrogation method, a maximum refractive index (RI) sensitivity of 3000 nm/RIU in the sensing range of 1.46–1.49 is achieved. The proposed sensor is suitable for detecting various high RI chemicals, biochemical and organic chemical analytes. Additionally, the effects of fiber structural parameters on the properties of plasmonic excitation are investigated and optimized for sensing performance as well as reducing the sensor’s footprint. PMID:25996510

  15. Fabry-Perot based strain insensitive photonic crystal fiber modal interferometer for inline sensing of refractive index and temperature.

    Science.gov (United States)

    Dash, Jitendra Narayan; Jha, Rajan

    2015-12-10

    We report a highly stable, compact, strain insensitive inline microcavity-based solid-core photonic crystal fiber (SCPCF) modal interferometer for the determination of the refractive index (RI) of an analyte and its temperature. The interferometer is fabricated by splicing one end of SCPCF with single-mode fiber (SMF) and the other end with hollow-core PCF. This is followed by cleaving the part of the solid glass portion possibly present after the microcavity. The formation of the cavities at the end faces of the SCPCF results in reduction of the period of the interference pattern that helps in achieving distinctiveness in the measurement. Three sensor heads have been fabricated, and each has a different length of the collapsed region formed by splicing SMF with SCPCF. The response of the sensors is found to be sensitive to the length of this collapsed region between SMF and SCPCF with a sensitivity of 53 nm/RI unit (RIU) and resolution of 1.8×10(-4) RIU. The temperature response of the sensor is found to be linear, having a temperature sensitivity of 12 pm/°C. In addition to these findings, the effect of strain on the proposed structure is analyzed in both wavelength and intensity interrogation.

  16. Raman-free nonlinear optical effects in high pressure gas-filled hollow core PCF.

    Science.gov (United States)

    Azhar, M; Wong, G K L; Chang, W; Joly, N Y; Russell, P St J

    2013-02-25

    The effective Kerr nonlinearity of hollow-core kagomé-style photonic crystal fiber (PCF) filled with argon gas increases to ~15% of that of bulk silica glass when the pressure is increased from 1 to 150 bar, while the zero dispersion wavelength shifts from 300 to 900 nm. The group velocity dispersion of the system is uniquely pressure-tunable over a wide range while avoiding Raman scattering-absent in noble gases-and having an extremely high optical damage threshold. As a result, detailed and well-controlled studies of nonlinear effects can be performed, in both normal and anomalous dispersion regimes, using only a fixed-frequency pump laser. For example, the absence of Raman scattering permits clean observation, at high powers, of the interaction between a modulational instability side-band and a soliton-created dispersive wave. Excellent agreement is obtained between numerical simulations and experimental results. The system has great potential for the realization of reconfigurable supercontinuum sources, wavelength convertors and short-pulse laser systems.

  17. FIBER LASER CONSTRUCTION AND THEORY INCLUDING FIBER BRAGG GRATINGS Photonic Crystal Fibers (PCFs) and applications of gas filled PCFs

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, Jacob O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-08

    The principles used in fiber lasers have been around for a while but it is only within the past few years that fiber lasers have become commercially available and used in high power laser applications. This paper will focus on the basic design principles of fiber lasers, including fiber Bragg gratings, principles of operation, and forms of non-linear effects. It will describe the type and associated doping of the fiber used and difficult designs used to guide energy from the pump to the active medium. Topics covered include fiber laser design, fiber Bragg gratings, materials used, differences in quantum energy loss, thermo-optical effects, stimulated Raman scattering, Brillouin scattering, photonic crystal fibers and applications of gas filled Photonic Crystal Fibers (PCFs). Thanks to fiber lasers, the energy required to produce high power lasers has greatly dropped and as such we can now produce kW power using a standard 120V 15A circuit. High power laser applications are always requiring more power. The fiber laser can now deliver the greater power that these applications demand. Future applications requiring more power than can be combined using standard materials or configurations will need to be developed to overcome the high energy density and high non-linear optical scattering effects present during high power operations.

  18. Dispersion Properties in Total Internal Reflective Photonic Crystal Fiber

    Institute of Scientific and Technical Information of China (English)

    WEN Hua; HAO Dong-shan

    2004-01-01

    The dispersion properties in the short wavelength region of total internal reflective photonic crystal fiber have been studied by using the models of the equivalent twin waveguide soliton coupling,effective refractive index, effective normalized frequency and dispersion management solitons. It is shown that the dispersion in the cladding waveguide of the total internal reflective photonic crystal fiber is a positive dispersion,and the dispersion of its core waveguide is a negative dispersion. The method of the compensated probing laser diffraction by the phase hole induced by the stationary pumping laser in the cladding waveguide enables the average dispersion value of the total internal reflective photonic crystal fiber to be close to zero and the zero dispersion point to shift to the short wavelength region.

  19. Photonic crystal fiber long-period gratings for biochemical sensing.

    Science.gov (United States)

    Rindorf, Lars; Jensen, Jesper B; Dufva, Martin; Pedersen, Lars Hagsholm; Høiby, Poul Erik; Bang, Ole

    2006-09-04

    We present experimental results showing that long-period gratings in photonic crystal fibers can be used as sensitive biochemical sensors. A layer of biomolecules was immobilized on the sides of the holes of the photonic crystal fiber and by observing the shift in the resonant wavelength of a long-period grating it was possible to measure the thickness of the layer. The long-period gratings were inscribed in a large-mode area silica photonic crystal fiber with a CO2 laser. The thicknesses of a monolayer of poly-L-lysine and double-stranded DNA was measured using the device. We find that the grating has a sensitivity of approximately 1.4nm/1nm in terms of the shift in resonance wavelength in nm per nm thickness of biomolecule layer.

  20. Group-velocity matched nonlinear photonic crystal fibers

    DEFF Research Database (Denmark)

    Bache, Morten; Lægsgaard, Jesper; Bang, Ole

    2006-01-01

    A quadratic nonlinear index-guiding silica PCF is optimized for efficient second-harmonic generation through dispersion calculations. Zero group-velocity mismatch is possible for any pump wavelength above 780 nm. Very high conversion efficiencies and bandwidths are found.......A quadratic nonlinear index-guiding silica PCF is optimized for efficient second-harmonic generation through dispersion calculations. Zero group-velocity mismatch is possible for any pump wavelength above 780 nm. Very high conversion efficiencies and bandwidths are found....

  1. Kagome fiber based industrial laser beam delivery

    Science.gov (United States)

    Maurel, M.; Gorse, A.; Beaudou, B.; Lekiefs, Q.; Chafer, M.; Debord, B.; Gérôme, F.; Benabid, F.

    2017-02-01

    We report on a Hollow Core-Photonic Crystal Fiber (HC-PCF) based high power ultra-short pulse laser beam delivery system (GLO-BDS) that combines ease-of-use, high laser-coupling efficiency, robustness and industrial compatible cabling. The GLO-BDS comprises a pre-aligned laser-injection head, a sheath cable protected HC-PCF and a modular fiber-output head. It enables fiber-core gas loading and evacuation in a hermetic fashion. 5 m long GLO-BDS were demonstrated for Yb USP laser, Ti:Sapphire laser and frequency-doubled Yb USP laser. They all exhibit a transmission coefficient larger than 80%, and a laser output profile close to single mode (M2 <1.3).

  2. Eliminating Crystals in Non-Oxide Optical Fiber Preforms and Optical Fibers

    Science.gov (United States)

    Tucker, Dennis S.; LaPointe, Michael R.

    2012-01-01

    Non ]oxide fiber optics such as heavy metal fluoride and chalcogenide glasses are extensively used in infrared transmitting applications such as communication systems, chemical sensors, and laser fiber guides for cutting, welding and medical surgery. The addition of rare earths such as erbium, enable these materials to be used as fiber laser and amplifiers. Some of these glasses however are very susceptible to crystallization. Even small crystals can lead to light scatter and a high attenuation coefficient, limiting their usefulness. Previously two research teams found that microgravity suppressed crystallization in heavy metal fluoride glasses. Looking for a less expensive method to suppress crystallization, ground based research was performed utilizing an axial magnetic field. The experiments revealed identical results to those obtained via microgravity processing. This research then led to a patented process for eliminating crystals in optical fiber preforms and the resulting optical fibers. In this paper, the microgravity results will be reviewed as well as patents and papers relating to the use of magnetic fields in various material and glass processing applications. Finally our patent to eliminate crystals in non ]oxide glasses utilizing a magnetic field will be detailed.

  3. Compact electrically controlled broadband liquid crystal photonic bandgap fiber polarizer

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2009-01-01

    An electrically controlled liquid crystal photonic-bandgap fiber polarizer is experimentally demonstrated. A maximum 21.3dB electrically tunable polarization extinction ratio is achieved with 45° rotatable transmission axis as well as switched on and off in 1300nm–1600nm.......An electrically controlled liquid crystal photonic-bandgap fiber polarizer is experimentally demonstrated. A maximum 21.3dB electrically tunable polarization extinction ratio is achieved with 45° rotatable transmission axis as well as switched on and off in 1300nm–1600nm....

  4. Fiber-to-fiber nonlinear coupling via a nematic liquid crystal

    Science.gov (United States)

    Nyushkov, B. N.; Trashkeev, S. I.; Ivanenko, A. V.; Kolker, D. B.; Purtov, P. A.

    2017-01-01

    Nonlinear optical coupling between two single-mode fibers terminated coaxially in a nematic liquid crystal (NLC) was explored for the first time. Light-induced reorientation of nematic molecules can result in the stable self-collimation of light transmitted through the gap between fibers. Thus, high coupling efficiency can be achieved despite large fiber spacing. We demonstrated a coupling efficiency of up to ∼0.7, achieved with spacing equal to four diffraction lengths. This feature opens up possibilities for the development of novel in-line fiber-optic elements based on NLCs. For instance, a polarization controller was proposed and considered.

  5. Ultra-low transmission loss (7.7 dB/km at 750 nm) inhibited-coupling guiding hollow-core photonic crystal fibers with a single ring of tubular lattice cladding

    CERN Document Server

    Debord, B; Chafer, M; Baz, A; Maurel, M; Blondy, J M; Hugonnot, E; Scol, F; Vincetti, L; Gerome, F; Benabid, F

    2016-01-01

    The advent of photonic bandgap (PBG) guiding hollow- core photonic crystal fiber (HC-PCF) sparked the hope of guiding light with attenuation below the fundamental silica Rayleigh scattering limit (SRSL) of conventional step-index fibers. Unfortunately, the combination of the strong core-cladding optical-overlap, the surface roughness at the silica cladding struts and the presence of interface-modes limited the lowest reported transmission-loss to 1.2 dB/km at 1550 nm. This hope is recently revived by the introduction of hypocycloid core- contour (i.e. negative curvature) in inhibited-coupling (IC) guiding HC-PCF, and the reduction of their confinement loss to a level that makes them serious contenders for light transmission below the SRSL in UV- VIS-NIR spectral range. Here, we report on several IC guiding HC-PCFs with a hypocycloid core-contour and a cladding structure made of a single ring from a tubular lattice. The fibers guide in the UV-VIS and NIR, and among which we list one with a record transmission ...

  6. All-optical NRZ-to-RZ format conversion at 10 Gbit/s with 1-to-4 wavelength multicasting exploiting cross-phase modulation & four-wave-mixing in single dispersion-flattened highly nonlinear photonic crystal fiber

    Science.gov (United States)

    Hui, Zhan-Qiang; Zhang, Bo; Zhang, Jian-Guo

    2016-04-01

    All-optical NRZ-to-RZ format conversion with a function of wavelength multicasting is proposed in this paper, which is realized by exploiting cross-phase modulation (XPM) and four-wave-mixing (FWM) in a dispersion-flattened highly nonlinear photonic crystal fiber (DF-HNL-PCF). The designed format converter is experimentally demonstrated, for which the 1-to-4 wavelength multicasting is achieved simultaneously by filtering out two FWM idler waves and both blue-chirped and red-chirped components of the broadened NRZ spectrum induced by XPM. Moreover, the wavelength tunability and dynamic characteristics of the proposed NRZ-to-RZ format converter are also exploited using the different central wavelengths of an optical clock signal and varying the input optical power at a DF-HNL-PCF in our experiment. It is shown that the designed format converter can possess a wide range of operational wavelength over 17 nm, an optimal extinction ratio of 11.6 dB, and a Q-factor of 7.1, respectively. Since the proposed scheme uses an optical fiber-based configuration and is easy for implementation, it can be very useful for future applications in advanced fiber-optic communication networks.

  7. On-chip tunable long-period gratings in liquid crystal infiltrated photonic crystal fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Weirich, Johannes; Alkeskjold, Thomas Tanggaard;

    2009-01-01

    An on-chip tunable long-period grating device in a liquid crystal infiltrated photonic crystal fiber is experimentally demonstrated. The depth and position of the notch are tuned electrically and thermally. The transmission axis can be electrically controlled as well as switched on and off....

  8. Electrically tunable bandpass filter using solid-core photonic crystal fibers filled with multiple liquid crystals

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2010-01-01

    An electrically tunable bandpass filter is designed and fabricated by integrating two solid-core photonic crystal fibers filled with different liquid crystals in a double silicon v-groove assembly. By separately controlling the driving voltage of each liquid-crystal-filled section, both the short......-wavelength edge and the long-wavelength edge of the bandpass filter are tuned individually or simultaneously with the response time in the millisecond range....

  9. Photonic crystal fiber modal interferometer based on thin-core-fiber mode exciter.

    Science.gov (United States)

    Miao, Yinping; Ma, Xixi; Wu, Jixuan; Song, Binbin; Zhang, Hao; Liu, Bo; Yao, Jianquan

    2015-11-10

    A thin-core-fiber excited photonic crystal fiber modal interferometer has been proposed and experimentally demonstrated. By employing a thin-core fiber as the mode exciter, both of the core and cladding modes propagate in the photonic crystal fiber and interfere with each other. The experimental results show that the transmission dips corresponding to different-order modes have various strain responses with opposite shift directions. The strain sensitivity could be improved to 58.57  pm/με for the applied strain from 0 to 491 με by utilizing the wavelength interval between the dips with opposite shift directions. Moreover, due to the pure silica property of the employed photonic crystal fiber, the proposed fiber modal interferometer exhibits a low-temperature sensitivity of about 0.56  pm/°C within a temperature range from 26.4°C (room temperature) to 70°C. Additionally, the proposed fiber modal interferometer has several advantages, such as good stability, compact structure, and simple fabrication. Therefore, it is more applicable for strain measurement with reducing temperature cross-sensitivity.

  10. Infiltration liquid crystal in microstructured polymer optical fibers

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Wei, Lei; Bang, Ole

    2009-01-01

    POF is butt-coupled to a conventional single mode fiber (SMF) with the broadband light from a supercontinuum source. It is clear to see the colour of the guided modes is red, since some wavelengths are attenuated by the material loss of PMMA in visible region. A positive dielectric anisotropy liquid crystal E...

  11. Liquid Crystal Photonic bandgap Fibers: Modeling and Devices

    DEFF Research Database (Denmark)

    Weirich, Johannes

    In this PhD thesis an experimental and numerical investigation of liquid crystal infiltrated photonic bandgap fibers (LCPBGs) is presented. A simulation scheme for modeling LCPBG devices including electrical tunability is presented. New experimental techniques, boundary coating and the applicatio...

  12. Birefringent Bragg Gratings in Highly-Nonlinear Photonic Crystal Fiber

    Institute of Scientific and Technical Information of China (English)

    Kevin Cook; John Canning; John Holdsworth

    2008-01-01

    Efficient writing of Bragg gratings in 12-ring highly-nonlinear photonic crystal fibers is described. Experimental and numerical investigations are performed to reveal the optimum angle for coupling UV writing light to the core. Furthermore, we show that the formation of a strongly briefringent grating is at a particular angle of orientation.

  13. Widely tunable femtosecond solitonic radiation in photonic crystal fiber cladding

    DEFF Research Database (Denmark)

    Peng, J. H.; Sokolov, A. V.; Benabid, F.

    2010-01-01

    We report on a means to generate tunable ultrashort optical pulses. We demonstrate that dispersive waves generated by solitons within the small-core features of a photonic crystal fiber cladding can be used to obtain femtosecond pulses tunable over an octave-wide spectral range. The generation...

  14. Fiber Drawn 2D Polymeric Photonic Crystal THz Filters

    DEFF Research Database (Denmark)

    Stecher, Matthias; Jansen, Christian; Ahmadi-Boroujeni, Mehdi

    2012-01-01

    In this paper, we report on different polymeric 2D photonic crystal filters for THz frequencies which are fabricated by a standard fiber drawing technique. The bandstop filters were simulated and designed by the generalized multipole technique (GMT). The frequency and angle dependent transmission...

  15. Estimating modal instability threshold for photonic crystal rod fiber amplifiers

    DEFF Research Database (Denmark)

    Johansen, Mette Marie; Hansen, Kristian Rymann; Laurila, Marko;

    2013-01-01

    We present a semi-analytic numerical model to estimate the transverse modal instability (TMI) threshold for photonic crystal rod amplifiers. The model includes thermally induced waveguide perturbations in the fiber cross section modeled with finite element simulations, and the relative intensity...

  16. Coupling of two defect modes in photonic crystal fibers

    Institute of Scientific and Technical Information of China (English)

    Yuntuan Fang; Tinggen Shen

    2005-01-01

    The coupling characteristics of two defect modes in photonic crystal fibers are investigated theoretically by the finite-difference time-domain (FDTD) method. The transmission spectrum and eigenmodes of optical wave are found to be very sensitive to the geometrical and physical parameters of the structure, as well as to the relative position of the two defects.

  17. Optimizing POF/PCF based optical switch for indoor LAN

    Science.gov (United States)

    Bhuiyan, M. M. I.; Rashid, M. M.; Ahmed, Sayem; Bhuiyan, M.; Kajihara, M.

    2013-12-01

    For indoor local area network (LAN) the Polymer optical fiber (POF) is mostly appropriate, because of its large core diameter and flexible material. A 1×2 optical switch for indoor LAN using POF and a shape memory alloy (SMA) coil actuator with magnetic latches was successfully fabricated and tested. To achieve switching by the movement of a POF, large displacement is necessary because the core diameter is large (e.g., 0.486mm). A SMA coil actuator is used for large displacement and a magnetic latching system is used for fixing the position of the shifted POF. The insertion loss is 0.40 to 0.50dB and crosstalk is more than 50dB without index-matching oil. Switching speed is less than 1s at a driving current of 80mA. A cycling test was performed 1.4 million times. Polymer clad fiber optical (PCF) switch also fabricated and tasted.

  18. 131 fs, 33 MHz all-fiber soliton laser at 1.07 microm with a film-type SWNT saturable absorber coated on polyimide.

    Science.gov (United States)

    Shohda, Fumio; Hori, Yuichiro; Nakazawa, Masataka; Mata, Junji; Tsukamoto, Jun

    2010-05-24

    We present a 1.07 microm all-fiber femtosecond soliton laser employing a film-type saturable absorber with a P3HT (poly-3-hexylthiophene) incorporated SWNT coated on polyimide film. We optimized the laser cavity as a dispersion-managed soliton laser with photonic crystal fiber (PCF) as an anomalous dispersion fiber at 1.07 microm. As a result, a 131 fs, 33 MHz pulse was successfully generated with a simple laser configuration.

  19. Photonic Crystal Fiber Based Entangled Photon Sources

    Science.gov (United States)

    2014-03-01

    new entanglement source is to make sure the source can provide an efficient and scalable quantum information processor . They are usually generated...multiple scattering on the telecom wavelength photon-pair. Our findings show that quantum correlation of polarization-entangled photon-pairs is...Fiber, Quantum communication, Keyed Communication in Quantum Noise (KCQ) 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18

  20. Optical fiber sensors measurement system and special fibers improvement

    Science.gov (United States)

    Jelinek, Michal; Hrabina, Jan; Hola, Miroslava; Hucl, Vaclav; Cizek, Martin; Rerucha, Simon; Lazar, Josef; Mikel, Bretislav

    2017-06-01

    We present method for the improvement of the measurement accuracy in the optical frequency spectra measurements based on tunable optical filters. The optical filter was used during the design and realization of the measurement system for the inspection of the fiber Bragg gratings. The system incorporates a reference block for the compensation of environmental influences, an interferometric verification subsystem and a PC - based control software implemented in LabView. The preliminary experimental verification of the measurement principle and the measurement system functionality were carried out on a testing rig with a specially prepared concrete console in the UJV Řež. The presented system is the laboratory version of the special nuclear power plant containment shape deformation measurement system which was installed in the power plant Temelin during last year. On the base of this research we started with preparation other optical fiber sensors to nuclear power plants measurement. These sensors will be based on the microstructured and polarization maintaining optical fibers. We started with development of new methods and techniques of the splicing and shaping optical fibers. We are able to made optical tapers from ultra-short called adiabatic with length around 400 um up to long tapers with length up to 6 millimeters. We developed new techniques of splicing standard Single Mode (SM) and Multimode (MM) optical fibers and splicing of optical fibers with different diameters in the wavelength range from 532 to 1550 nm. Together with development these techniques we prepared other techniques to splicing and shaping special optical fibers like as Polarization-Maintaining (PM) or hollow core Photonic Crystal Fiber (PCF) and theirs cross splicing methods with focus to minimalize backreflection and attenuation. The splicing special optical fibers especially PCF fibers with standard telecommunication and other SM fibers can be done by our developed techniques. Adjustment

  1. A Concrete Representation of Observational Equivalence for PCF

    CERN Document Server

    Churchill, Martin; McCusker, Guy

    2010-01-01

    The full abstraction result for PCF using game semantics requires one to identify all innocent strategies that are innocently indistinguishable. This involves a quantification over all innocent tests, cf. quantification over all innocent contexts. Here we present a representation of innocent strategies that equates innocently indistinguishable ones, yielding a representation of PCF terms that equates precisely those terms that are observational equivalent.

  2. Magnetic Field Measurements Based on Terfenol Coated Photonic Crystal Fibers

    Directory of Open Access Journals (Sweden)

    Carla C. Kato

    2011-11-01

    Full Text Available A magnetic field sensor based on the integration of a high birefringence photonic crystal fiber and a composite material made of Terfenol particles and an epoxy resin is proposed. An in-fiber modal interferometer is assembled by evenly exciting both eigenemodes of the HiBi fiber. Changes in the cavity length as well as the effective refractive index are induced by exposing the sensor head to magnetic fields. The magnetic field sensor has a sensitivity of 0.006 (nm/mT over a range from 0 to 300 mT with a resolution about ±1 mT. A fiber Bragg grating magnetic field sensor is also fabricated and employed to characterize the response of Terfenol composite to the magnetic field.

  3. Magnetic field measurements based on Terfenol coated photonic crystal fibers.

    Science.gov (United States)

    Quintero, Sully M M; Martelli, Cicero; Braga, Arthur M B; Valente, Luiz C G; Kato, Carla C

    2011-01-01

    A magnetic field sensor based on the integration of a high birefringence photonic crystal fiber and a composite material made of Terfenol particles and an epoxy resin is proposed. An in-fiber modal interferometer is assembled by evenly exciting both eigenemodes of the HiBi fiber. Changes in the cavity length as well as the effective refractive index are induced by exposing the sensor head to magnetic fields. The magnetic field sensor has a sensitivity of 0.006 (nm/mT) over a range from 0 to 300 mT with a resolution about ±1 mT. A fiber Bragg grating magnetic field sensor is also fabricated and employed to characterize the response of Terfenol composite to the magnetic field.

  4. SU-8 process optimization for high fiber coupling efficiency of liquid crystal filled photonic bandgap fiber components

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2009-01-01

    SU-8 structures are built up to increase the fiber coupling efficiency of liquid crystal photonic bandgap fiber components. The resolution reduction of UV exposure is minimized to 4%, and insertion loss is reduced to 2.7dB.......SU-8 structures are built up to increase the fiber coupling efficiency of liquid crystal photonic bandgap fiber components. The resolution reduction of UV exposure is minimized to 4%, and insertion loss is reduced to 2.7dB....

  5. Broadband electric-field-induced LP01 and LP02 second harmonic generation in Xe-filled hollow-core PCF.

    Science.gov (United States)

    Ménard, Jean-Michel; Köttig, Felix; St J Russell, Philip

    2016-08-15

    Second harmonic (SH) generation with 300 fs pump pulses is reported in a xenon-filled hollow-core photonic crystal fiber (PCF) across which an external bias voltage is applied. Phase-matched intermodal conversion from a pump light in the LP01 mode to SH light in the LP02 mode is achieved at a particular gas pressure. Using periodic electrodes, quasi-phase-matched SH generation into the low-loss LP01 mode is achieved at a different pressure. The low linear dispersion of the gas enables phase-matching over a broad spectral window, resulting in a measured bandwidth of ∼10  nm at high pump energies. A conversion efficiency of ∼18%/mJ is obtained. Gas-filled anti-resonant-reflecting hollow-core PCF uniquely offers pressure-tunable phase-matching, ultra-broadband guidance, and a very high optical damage threshold, which hold great promise for efficient three-wave mixing, especially in difficult-to-access regions of the electromagnetic spectrum.

  6. 基于超连续谱的光子晶体光纤表面等离子体效应%Photonic crystal fiber surface plasmon resonance effect based on supercontinuum source p

    Institute of Scientific and Technical Information of China (English)

    黄值河; 侯静; 彭杨; 李志鸿; 奚小明; 陈金宝

    2011-01-01

    提出了利用光子晶体光纤空气孔塌缩技术制作光子晶体光纤表面等离子体共振传感器,构建了空气孔完全塌缩的光子晶体光纤表面等离子体共振传感器模型,并模拟计算了其中的表面等离子体共振效应.制作了全光纤化的波长检测型的光子晶体光纤表面等离子体共振传感器,利用超连续谱光源进行了相关实验.实验结果表明:以空气为待测环境介质时,对应的共振波长为465 nm,与理论计算相符合.%A method of using the air-hole collapsed technology of photonic crystal fiber(PCF) to make surface plasmon resonance(SPR) sensors has been proposed. The air-hole completely collapsed PCF-SPR sensor model has been established and simulated. All-fibered wavelength-detection PCF-SPR sensors were constructed, and a supercontinuum source was used to do the correlated experiments. When air is the ambient medium to be tested, the measured resonance wavelength is 465 nm, which accords with the simulation.

  7. A New Design for All-Normal Near Zero Dispersion Photonic Crystal Fiber with Selective Liquid Infiltration for Broadband Supercontinuum Generation at 1.55 μm

    Directory of Open Access Journals (Sweden)

    Partha Sona Maji

    2014-01-01

    Full Text Available A new design of all-normal and near zero flattened dispersion based on all-silica photonic crystal fibers (PCFs using selectively liquid infiltration technique has been proposed to realize smooth broadband supercontinuum generation (SCG. The investigation gives the details of the effect of different geometrical parameters along with the infiltrating liquids on the dispersion characteristics of the fiber. Numerical investigations establish a dispersion value of −0.48 ps/nm/km around the wavelength of 1.55 μm. The optimized design has been found to be suitable for SCG around the C band of wavelength with flat broadband wavelength band (375 nm bandwidth and smooth spectrum with only a meter long of the PCF. The proposed structure also demonstrates good tunable properties that can help correct possible fabrication mismatch towards a better optimization design for various optical communication systems.

  8. High power supercontinuum generation in tapered photonic crystal fibers

    DEFF Research Database (Denmark)

    Møller, Uffe; Sørensen, Simon Toft; Larsen, Casper;

    2012-01-01

    Tapering of photonic crystal fibers has proven to be an effective way of blueshifting the dispersive wavelength edge of a supercontinuum spectrum down in the deep-blue. In this contribution we will discuss the underlying mechanisms of supercontinuum generation in tapers. We show, by introducing...... the concept of a group-acceleration mismatch, that for a given taper length, the downtapering section should be as long as possible to enhance the amount of blueshifted light. We also discuss the noise properties of supercontinuum in uniform and tapered fibers and we demonstrate that the amplitude noise...

  9. Hybrid squeezing of solitonic resonant radiation in photonic crystal fibers

    CERN Document Server

    Tran, Truong X; Soeller, Christoph; Blow, Keith J; Biancalana, Fabio

    2011-01-01

    We report on the existence of a novel kind of squeezing in photonic crystal fibers which is conceptually intermediate between the four-wave mixing induced squeezing, in which all the participant waves are monochromatic waves, and the self-phase modulation induced squeezing for a single pulse in a coherent state. This hybrid squeezing occurs when an arbitrary short soliton emits quasi-monochromatic resonant radiation near a zero group velocity dispersion point of the fiber. Photons around the resonant frequency become strongly correlated due to the presence of the classical soliton, and a reduction of the quantum noise below the shot noise level is predicted.

  10. Chromatic Dispersion Compensation Using Photonic Crystal Fibers with Hexagonal Distribution

    Directory of Open Access Journals (Sweden)

    Erick E. Reyes-Vera

    2013-11-01

    Full Text Available In this paper we show various configurations of photonic crystal fiber with hexagonal holes distribution for compensation of chromatic dispersion in optical communications links. The vectorial finite element method with scattering boundary condition was used for the analysis of the fibers. From these results it was estimated variation of the dispersion and the dispersion slope with respect to change in the diameter of the holes in the microstructure. With the above was possible to obtain values of dispersion in the C and L bands of telecommunications close to -850 ps / nm * km, with confinement losses 10-3 dB / km

  11. Soliton blue-shift in tapered photonic crystal fiber

    CERN Document Server

    Stark, S P; Russell, P St J

    2010-01-01

    We show that solitons undergo a strong blue shift in fibers with a dispersion landscape that varies along the direction of propagation. The experiments are based on a small-core photonic crystal fiber, tapered to have a core diameter that varies continuously along its length, resulting in a zero-dispersion wavelength that moves from 731 nm to 640 nm over the transition. The central wavelength of a soliton translates over 400 nm towards shorter wavelength. This accompanied by strong emission of radiation into the UV and IR spectral region. The experimental results are confirmed by numerical simulation.

  12. Design of optical time-division multiplexed systems using the cascaded four-wave mixing in a highly nonlinear photonic crystal fiber for simultaneous time demultiplexing and wavelength multicasting

    Science.gov (United States)

    Hui, Zhan-Qiang; Zhang, Jian-Guo

    2015-07-01

    This paper reports a new design of optical time-division multiplexed (OTDM) systems that possess a functionality of simultaneous time demultiplexing and wavelength multicasting based on the cascaded four-wave mixing in a dispersion-flattened highly nonlinear photonic crystal fiber (DF-HNL-PCF). A module of OTDM demultiplexing and wavelength multicasting can be feasibly implemented by using a 3 dB optical coupler, a high-power erbium-doped fiber amplifier, a short-length DF-HNL-PCF, and a wavelength demultiplexer in the simple configuration. We also carry out an experiment on the proposed system to demonstrate the 100-10 Gbit s-1 OTDM demultiplexing with wavelength conversion simultaneously at 4 multicast wavelengths. It is shown that error-free wavelength multicasting is achieved on two wavelength channels with the minimum power penalty of 3.2 dB relative to the 10 Gbit s-1 back-to-back measurement, whereas the bit error rates of other two multicasting channels are measured to be about 10-6-10-5. Moreover, we propose the use of a proper error-correcting code to improve the multicasting performance of such an OTDM system, and our work reveals that the resulting system can theoretically support error-free multicasting of the OTDM-demultiplexed signal on four wavelength channels.

  13. 基于表面增强拉曼散射的光子晶体光纤传感器%Photonic crystal fiber SERS sensors

    Institute of Scientific and Technical Information of China (English)

    姚建铨; 邸志刚; 贾春荣; 陆颖; 徐德刚; 杨鹏飞; 邴丕彬; 郑一博

    2011-01-01

    Optical fiber surface enhanced Raman scattering (SERS) sensors, which achieve optical fiber sensing based on SERS effect, have several particular advantages.However, the use of conventional fiber has brought optical fiber SERS sensors some drawbacks, such as background absorption and interference, fluorescence effect and Raman scattering from the fiber itself.The adaptive SERS sensors are developed to solve these problems, which is at least partially promised by the newly emerging photonic crystal fibers (PCFs).The PCFs SERS sensors composed of PCFs and SERS, have several advantages such as high sensitivity, interference-immunity, simple geometry, light path flexibility, and little dependence on analyte.This review shows the development and the state-of-art of SERS, PCFs,and PCF sensors based on SERS, mainly including theory, geometries, and biosensors applications.Although the recent developments is fast, there still exist a few problems that should be addressed, and particularly, the trend of PCF sensors based on SERS is discussed.%基于表面增强拉曼散射(SERS)的光纤传感器结合了光纤与表面增强拉曼散射效应,具有普通传感器无法比拟的优点.但是,应用普通光纤将带来诸如背景干扰与吸收、光纤自身的荧光效应及拉曼散射等缺点.为解决这一问题,将光子晶体光纤与表面增强拉曼散射效应相结合,称为基于表面增强拉曼散射的光子晶体光纤(PCFs)传感器,具有高灵敏度、抗干扰、结构简单、光路可弯曲及对待测物影响极小等优点.介绍了表面增强拉曼散射效应、光子晶体光纤和基于表面增强拉曼散射的光子晶体光纤传感器的发展现状,主要包括原理、几何结构和在生物传感中的独特应用,总结了此新型传感器的发展趋势,讨论了下一步亟需解决的问题.

  14. High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Chen Wei; Lu Peixiang [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074 (China); Li Shiyu; Wang Dongxiang, E-mail: chenwei@fiberhome.com.cn [State Key Laboratory of Optical Communication Technologies and Networks, Fiberhome Telecommunication Technologies Co. Ltd, 430074 (China)

    2011-02-01

    In this letter, large-mode-area double-cladding ytterbium-doped photonic crystal fiber was designed in theory and fabricated in practice. This fiber we have fabricated successfully has endless single mode operation performance and large inner-cladding numerical aperture of more than 0.75. The struts width between large air-holes in the outer-cladding is about 0.22 {mu}m. The photonic crystal fiber has a mode-area about 1465.7{mu}m{sup 2}. Due to the material being pure silica and air, such structures have excellent capacity to with-stand high temperature. The laser light can have very good beam quality, even diffraction-limited beam quality because of the single-mode core. This fabrication technical breakthrough of novelty high performance double-cladding ytterbium-doped photonic crystal fibers will give contributions to the high power fiber lasers and promote the progress of technology in the fields of high power lasers.

  15. High harmonic generation in a gas-filled hollow-core photonic crystal fiber

    Science.gov (United States)

    Heckl, O. H.; Baer, C. R. E.; Kränkel, C.; Marchese, S. V.; Schapper, F.; Holler, M.; Südmeyer, T.; Robinson, J. S.; Tisch, J. W. G.; Couny, F.; Light, P.; Benabid, F.; Keller, U.

    2009-10-01

    :270, 2007). The interaction between the laser pulses and the gas occurs in a Kagome-type Hollow-Core Photonic Crystal Fiber (HC-PCF) (Benabid et al., Science 298:399, 2002), which reduces the detection threshold for HHG to only 200 nJ. This novel type of fiber guides nearly all of the light in the hollow core (Couny et al., Science 318:1118, 2007), preventing damage even at intensities required for HHG. Our fiber guided 30-fs pulses with a pulse energy of more than 10 μJ, which is more than five times higher than for any other photonic crystal fiber (Hensley et al., Conference on Lasers and Electro-Optics (CLEO), IEEE Press, New York, 2008).

  16. Enhanced electrophoretic DNA separation in photonic crystal fiber.

    Science.gov (United States)

    Sun, Yi; Nguyen, Nam-Trung; Kwok, Yien Chian

    2009-07-01

    Joule heating generated by the electrical current in capillary electrophoresis leads to a temperature gradient along the separation channel and consequently affects the separation quality. We describe a method of reducing the Joule heating effect by incorporating photonic crystal fiber into a micro capillary electrophoresis chip. The photonic crystal fiber consists of a bundle of extremely narrow hollow channels, which ideally work as separation columns. Electrophoretic separation of DNA fragments was simultaneously but independently carried out in 54 narrow capillaries with a diameter of 3.7 microm each. The capillary bundle offers more efficient heat dissipation owing to the high surface-to-volume ratio. Under the same electrical field strength, notable improvement in resolution was obtained in the capillary bundle chip.

  17. Toward single-mode active crystal fibers for next-generation high-power fiber devices.

    Science.gov (United States)

    Lai, Chien-Chih; Gao, Wan-Ting; Nguyen, Duc Huy; Ma, Yuan-Ron; Cheng, Nai-Chia; Wang, Shih-Chang; Tjiu, Jeng-Wei; Huang, Chun-Ming

    2014-08-27

    We report what we believe to be the first demonstration of a facile approach with controlled geometry for the production of crystal-core ceramic-clad hybrid fibers for scaling fiber devices to high average powers. The process consists of dip coating a solution of polycrystalline alumina onto a high-crystallinity 40-μm-diameter Ti:sapphire single-crystalline core followed by thermal treatments. Comparison of the measured refractive index with high-resolution transmission electron microscopy reveals that a Ca/Si-rich intragranular layer is precipitated at grain boundaries by impurity segregation and liquid-phase formation due to the relief of misfit strain energy in the Al2O3 matrix, slightly perturbing the refractive index and hence the optical properties. Additionally, electron backscatter diffractions supply further evidence that the Ti:sapphire single-crystalline core provides the template for growth into a sacrificial polycrystalline cladding, bringing the core and cladding into a direct bond. The thus-prepared doped crystal core with the undoped crystal cladding was achieved through the abnormal grain-growth process. The presented results provide a general guideline both for controlling crystal growth and for the performance of hybrid materials and provides insights into how one might design single-mode high-power crystal fiber devices.

  18. Coherent and incoherent spectral broadening in a photonic crystal fiber.

    Science.gov (United States)

    Gross, C; Best, Th; van Oosten, D; Bloch, I

    2007-07-01

    The coherence of the spectral broadening process is the key requisite for the application of supercontinua in frequency combs. We investigate the coherence of two subsequent supercontinuum pulses created in a photonic crystal fiber pumped by a femtosecond laser. We measure Young interference fringes from a Michelson-type interferometer at different wavelengths of the output spectrum and analyze their dependence on pump intensity and polarization. The visibility of these fringes is a direct measure of the coherence of the spectral broadening processes.

  19. Supermode analysis of the 18-core photonic crystal fiber laser

    Institute of Scientific and Technical Information of China (English)

    王远; 姚建铨; 郑一博; 温午麒; 陆颖; 王鹏

    2012-01-01

    The modal of 18-core photonic crystal fiber laser is discussed and calculated.And corresponding far-field distribution of the supermodes is given by Fresnel diffraction integral.For improving beam quality,the mode selection method based on the Talbot effect is introduced.The reflection coefficients are calculated,and the result shows that an in-phase supermode can be locked better at a large propagation distance.

  20. Optimized photonic crystal fibers supporting efficient capillary electrophoresis

    Science.gov (United States)

    Calcerrada, M.; García-Ruiz, C.; Roy, P.; Gonzalez-Herraez, M.

    2013-05-01

    In this paper we present preliminary results on the use of Photonic Crystal Fibers (PCFs) in a conventional capillary electrophoresis system to separate and detect fluorescent species. PCFs show interesting advantages over conventional capillaries for this application, including larger surface-to-volume ratio and potential for higher resolution with comparable sensitivity. Our results illustrate some of these advantages, and we point out the need for stringent tolerances in the fabrication of specific PCFs for this application.

  1. Nanoengineering of photonic crystal fibers for supercontinuum spectral shaping

    DEFF Research Database (Denmark)

    Frosz, Michael Henoch; Sørensen, Thorkild; Bang, Ole

    2006-01-01

    Supercontinuum generation using picosecond pulses pumped into cobweb photonic crystal fibers is investigated. Dispersion profiles are calculated for several fiber designs and used to analytically investigate the influence of the fiber structural parameters (core size and wall thickness......) on the location of the Stokes and anti-Stokes bands and gain bandwidth. An analysis shows that the Raman effect is responsible for reducing the four-wave mixing gain and a slight reduction in the corresponding frequency shift from the pump, when the frequency shift is much larger than the Raman shift. Using...... numerical simulations we find that four-wave mixing is the dominant physical mechanism for the pumping scheme considered, and that there is a trade-off between the spectral width and the spectral flatness of the supercontinuum. The balance of this trade-off is determined by nanometer-scale design...

  2. Different supercontinuum generation processes in photonic crystal fibers pumped with a 1064-nm picosecond pulse

    Science.gov (United States)

    Chen, Hong-Wei; Jin, Ai-Jun; Chen, Sheng-Ping; Hou, Jing; Lu, Qi-Sheng

    2013-08-01

    Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments. The main purpose is to investigate the supercontinuum generation processes excited by a given pump source through the experimental study of some specific fibers. A 20-W all-fiber picosecond master oscillator-power amplifier (MOPA) laser is used to pump three different kinds of photonic crystal fibers for supercontinuum generation. Three diverse supercontinuum formation processes are observed to correspond to photonic crystal fibers with distinct dispersion properties. The experimental results are consistent with the relevant theoretical results. Based on the above analyses, a watt-level broadband white light supercontinuum source spanning from 500 nm to beyond 1700 nm is demonstrated by using a picosecond fiber laser in combination with the matched photonic crystal fiber. The limitation of the group velocity matching curve of the photonic crystal fiber is also discussed in the paper.

  3. Different supercontinuum generation processes in photonic crystal fibers pumped with a 1064-nm picosecond pulse

    Institute of Scientific and Technical Information of China (English)

    Chen Hong-Wei; Jin Ai-Jun; Chen Sheng-Ping; Hou Jing; Lu Qi-Sheng

    2013-01-01

    Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments.The main purpose is to investigate the supercontinuum generation processes excited by a given pump source through the experimental study of some specific fibers.A 20-W all-fiber picosecond master oscillator-power amplifier (MOPA) laser is used to pump three different kinds of photonic crystal fibers for supercontinuum generation.Three diverse supercontinuum formation processes are observed to correspond to photonic crystal fibers with distinct dispersion properties.The experimental results are consistent with the relevant theoretical results.Based on the above analyses,a watt-level broadband white light supercontinuum source spanning from 500 nm to beyond 1700 nm is demonstrated by using a picosecond fiber laser in combination with the matched photonic crystal fiber.The limitation of the group velocity matching curve of the photonic crystal fiber is also discussed in the paper.

  4. Optical frequency standard using acetylene-filled hollow-core photonic crystal fibers

    DEFF Research Database (Denmark)

    Triches, Marco; Michieletto, Mattia; Hald, Jan

    2015-01-01

    Gas-filled hollow-core photonic crystal fibers are used to stabilize a fiber laser to the 13C2H2 P(16) (ν1+ν3) transition at 1542 nm using saturated absorption. Four hollow-core fibers with different crystal structure are compared in terms of long term lock-point repeatability and fractional...

  5. Liquid crystals in micron-scale droplets, shells and fibers

    Science.gov (United States)

    Urbanski, Martin; Reyes, Catherine G.; Noh, JungHyun; Sharma, Anshul; Geng, Yong; Subba Rao Jampani, Venkata; Lagerwall, Jan P. F.

    2017-04-01

    The extraordinary responsiveness and large diversity of self-assembled structures of liquid crystals are well documented and they have been extensively used in devices like displays. For long, this application route strongly influenced academic research, which frequently focused on the performance of liquid crystals in display-like geometries, typically between flat, rigid substrates of glass or similar solids. Today a new trend is clearly visible, where liquid crystals confined within curved, often soft and flexible, interfaces are in focus. Innovation in microfluidic technology has opened for high-throughput production of liquid crystal droplets or shells with exquisite monodispersity, and modern characterization methods allow detailed analysis of complex director arrangements. The introduction of electrospinning in liquid crystal research has enabled encapsulation in optically transparent polymeric cylinders with very small radius, allowing studies of confinement effects that were not easily accessible before. It also opened the prospect of functionalizing textile fibers with liquid crystals in the core, triggering activities that target wearable devices with true textile form factor for seamless integration in clothing. Together, these developments have brought issues center stage that might previously have been considered esoteric, like the interaction of topological defects on spherical surfaces, saddle-splay curvature-induced spontaneous chiral symmetry breaking, or the non-trivial shape changes of curved liquid crystal elastomers with non-uniform director fields that undergo a phase transition to an isotropic state. The new research thrusts are motivated equally by the intriguing soft matter physics showcased by liquid crystals in these unconventional geometries, and by the many novel application opportunities that arise when we can reproducibly manufacture these systems on a commercial scale. This review attempts to summarize the current understanding of

  6. Designing an ultra negative dispersion Photonic Crystal Fiber (PCFs) with square lattice geometry

    CERN Document Server

    Maji, Partha Sona

    2015-01-01

    In this article we have theoretically investigated the dispersion characteristics of dual-core PCF, based on square-lattice geometry by varying different parameters. The fiber exhibits a very large negative dispersion because of rapid slope change of the refractive indices at the coupling wavelength between the inner core and outer core. The dependence of different geometrical parameters namely hole-to-hole spacing (pitch) and different air-hole diameter (d) was investigated in detail. By proper adjustment of the available parameters, a high negative dispersion value of -47,500 ps/nm/km has been achieved around the wavelength of 1550nm. Our proposed fiber will be an excellent device for dispersion compensation in long-haul data transmission as being thousand times more than the available DCFs.

  7. Erbium-doped photonic crystal fiber chaotic laser

    Science.gov (United States)

    Martín, Juan C.; Used, Javier; Sánchez-Martín, José A.; Berdejo, Víctor; Vallés, Juan A.; Álvarez, José M.; Rebolledo, Miguel A.

    2011-09-01

    An erbium-doped photonic crystal fiber laser has been designed, constructed and characterized in order to examine the feasibility of this kind of devices for secure communications applications based on two identical chaotic lasers. Inclusion of a tailored photonic crystal fiber as active medium improves considerably the security of the device because it allows customization of the mode transversal profile, very influential on the laser dynamics and virtually impossible to be cloned by undesired listeners. The laser design has been facilitated by the combination of characterization procedures and models developed by us, which allow prediction of the most suitable laser features (losses, length of active fiber, etc.) to a given purpose (in our case, a laser that emits chaotically for a wide assortment of pump modulation conditions). The chaotic signals obtained have been characterized by means of topological analysis techniques. The underlying chaotic attractors found present topological structures belonging to classes of which very scarce experimental results have been reported. This fact is interesting from the point of view of the study of nonlinear systems and, besides, it is promising for secure communications: the stranger the signals, the more difficult for an eavesdropper to synthesize another system with similar dynamics.

  8. Continuous preparation of polymer coated drug crystals by solid hollow fiber membrane-based cooling crystallization.

    Science.gov (United States)

    Chen, Dengyue; Singh, Dhananjay; Sirkar, Kamalesh K; Pfeffer, Robert

    2016-02-29

    A facile way to continuously coat drug crystals with a polymer is needed in controlled drug release. Conventional polymer coating methods have disadvantages: high energy consumption, low productivity, batch processing. A novel method for continuous polymer coating of drug crystals based on solid hollow fiber cooling crystallization (SHFCC) is introduced here. The drug acting as the host particle and the polymer for coating are Griseofulvin (GF) and Eudragit RL100, respectively. The polymer's cloud point temperature in its acetone solution was determined by UV spectrophotometry. An acetone solution of the polymer containing the drug in solution as well as undissolved drug crystals in suspension were pumped through the tube side of the SHFCC device; a cold liquid was circulated in the shell side to rapidly cool down the feed solution-suspension in the hollow-fiber lumen. The polymer precipitated from the solution and coated the suspended crystals due to rapid temperature reduction and heterogeneous nucleation; crystals formed from the solution were also coated by the polymer. Characterizations by scanning electron microscopy, thermogravimetric analysis, laser diffraction spectroscopy, X-ray diffraction, Raman spectroscopy, and dissolution tests show that a uniformly coated, free-flowing drug/product can be obtained under appropriate operating conditions without losing the drug's pharmaceutical properties and controlled release characteristics.

  9. Frequency conversion through spontaneous degenerate four wave mixing in large mode area hybrid photonic crystal fibers

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Alkeskjold, Thomas Tanggaard; Olausson, Christina Bjarnal Thulin;

    2014-01-01

    Frequency conversion through spontaneous degenerate four wave mixing (FWM) is investigated in large mode area hybrid photonic crystal fibers. Different FWM processes are observed, phasematching between fiber modes of orthogonal polarization, intermodal phasematching across bandgaps, and intramodal...

  10. Dispersion engineered cob-web photonic crystal fibers for efficient supercontinuum generation

    OpenAIRE

    Sørensen, Niels Thorkild; Nikolov, N. I.; Bang, Ole; Bjarklev, Anders Overgaard; Hougaard, Kristian G.; Hansen, Kim Per

    2004-01-01

    Highly nonlinear cob-web photonic crystal fibers are engineered to have dispersion profiles for efficient direct degenerate four-wave mixing and optimized supercontinuum generation with low-power picosecond pulses. This process is robust to fiber irregularities.

  11. Dispersion engineered cob-web photonic crystal fibers for efficient supercontinuum generation

    DEFF Research Database (Denmark)

    Sørensen, Niels Thorkild; Nikolov, N.I.; Bang, Ole;

    2004-01-01

    Highly nonlinear cob-web photonic crystal fibers are engineered to have dispersion profiles for efficient direct degenerate four-wave mixing and optimized supercontinuum generation with low-power picosecond pulses. This process is robust to fiber irregularities.......Highly nonlinear cob-web photonic crystal fibers are engineered to have dispersion profiles for efficient direct degenerate four-wave mixing and optimized supercontinuum generation with low-power picosecond pulses. This process is robust to fiber irregularities....

  12. Dispersion-tailored, low-loss photonic crystal fibers for the THz range

    DEFF Research Database (Denmark)

    Nielsen, Kristian; Rasmussen, Henrik K.; Adam, Aurèle J.L.;

    2009-01-01

    We have fabricated a new type of photonic crystal fibers based on a cyclic olefin copolymer, transparent in the THz range. We characterize the propagation loss, dispersion, and spatial beam profile in fibers designed for low and high dispersion.......We have fabricated a new type of photonic crystal fibers based on a cyclic olefin copolymer, transparent in the THz range. We characterize the propagation loss, dispersion, and spatial beam profile in fibers designed for low and high dispersion....

  13. Guided mode gain competition in Yb-doped rod-type photonic crystal fibers

    DEFF Research Database (Denmark)

    Poli, Federica; Passaro, Davide; Cucinotta, Annamaria

    2009-01-01

    The gain competition among the guided modes in Yb-doped rod-type photonic crystal fibers with a low refractive index core is investigated with a spatial model to demonstrate the fiber effective single-mode behaviour.......The gain competition among the guided modes in Yb-doped rod-type photonic crystal fibers with a low refractive index core is investigated with a spatial model to demonstrate the fiber effective single-mode behaviour....

  14. Selective detection of labeled DNA using an air-clad photonic crystal fiber

    DEFF Research Database (Denmark)

    Jensen, Jesper Bo Damm; Hoiby, P.E.; Pedersen, L.H.

    2004-01-01

    Demonstration of selective detection of fluorophore labeled DNA by hybridization inside the air holes of a photonic crystal fiber A laser exposes the fiber from the side and the emitted fluorescence tunnels into the core.......Demonstration of selective detection of fluorophore labeled DNA by hybridization inside the air holes of a photonic crystal fiber A laser exposes the fiber from the side and the emitted fluorescence tunnels into the core....

  15. Fabrication of sisal fibers/epoxy composites with liquid crystals polymer grafted on sisal fibers

    Science.gov (United States)

    Luo, Q. Y.; Lu, S. R.; Song, L. F.; Li, Y. Q.

    2016-07-01

    In this word, microcrystalline cellulose fibers (MCFs), extracted from sisal fibers, were treated with function end-group hyperbranched liquid crystals (HLP). This work brought some insights into the successful surface modification in epoxy composite with HLP. The HLP-MCFs/epoxy composites are studied systematically. The HLP - MCFs/epoxy composites were studied by Fourier transform infrared spectroscopy (FT-IR), polarizing microscope (POM), X-ray photoelectron spectroscopy (XPS) and mechanical properties analysis. The results reveal that the reinforcement of EP composites was carried out by adding HLP-MCFs. In particular, with 1.0 wt% filler loading, the flexural strength, tensile strength, impact strength and flexural modulus of the HLP-MCFs/EP composites were increased by 60%, 69%, 130%, and 192%, respectively. It anticipates that our current work exploits more efficient methods to overcome the few nature fiber/polymer (NPC) adhesion in the interface region and provides implications for the engineering applications of the development of NPC.

  16. Highly-stable monolithic femtosecond Yb-fiber laser system based on photonic crystal fibers

    DEFF Research Database (Denmark)

    Liu, Xiaomin; Lægsgaard, Jesper; Turchinovich, Dmitry

    2010-01-01

    of around 297 fs duration. Our laser shows exceptional stability. No Q-switched modelocking events were detected during 4-days long observation. An average fluctuation of only 7.85 · 10−4 over the mean output power was determined as a result of more than 6-hours long measurement. The laser is stable towards......A self-starting, passively stabilized, monolithic all polarizationmaintaining femtosecond Yb-fiber master oscillator / power amplifier with very high operational and environmental stability is demonstrated. The system is based on the use of two different photonic crystal fibers. One is used...... in the oscillator cavity for dispersion balancing and nonlinear optical limiting, and another one is used for low nonlinearity final pulse recompression. The chirped-pulse amplification and recompression of the 232-fs, 45-pJ/pulse oscillator output yields a final direct fiber-end delivery of 7.3-nJ energy pulses...

  17. Numerical study on pulse trapping in birefringent photonic crystal fibers

    Institute of Scientific and Technical Information of China (English)

    YAO Yan-yan; LI Shu-guang; FU Bo; ZHANG Lei; ZHANG Mei-yan

    2011-01-01

    Using an adaptive split-step Fourier method, the coupled nonlinear Schrodinger equations have been numerically solved in this paper. The nonlinear propagation of an ultrashort optical pulse in the birefringent photonic crystal fibers is investigated numerically. It is found that the phenomenon of pulse trapping occurs when the incident pulse is deviating from the principal axis of the fiber with some angle. Owing to the bireffingence effect, the incident pulse can be regarded as twoorthogonal polarized pulses. The phenomenon of pulse trapping occurs because of the cross phase modulation (XPM) between the two components. As a result, the bandwidth of the supercontinuum (SC) decreases compared with the case that the incident pulse is input along the principal axis. When the polarization direction of the incident pulse is parallel to the fast axis, the bandwidth of the supercontinuum is maximaL

  18. ASE suppression in Er3+ doped dual-core triangular lattice Photonic Crystal Fibers (PCFs) for communication wavelength

    CERN Document Server

    Maji, Partha Sona

    2014-01-01

    In this article, silica based triangular lattice PCF has been investigated towards both narrowband and broadband dispersion compensation for application in the communication wavelength. A dual core structure is obtained by introducing two different air-hole diameters in the cladding of the PCF. Dependence of individual structural parameters towards high negative dispersion (both narrowband and broadband) has been investigated in details with multipole mode based solver. The numerical investigation exhibits narrowband of very large negative dispersion of -37,300 ps/nm/km around the wavelength of 1550 nm. Present investigation also reports broadband dispersion values varying from -800 ps/nm/km to -2600 ps/nm/km over a 200 nm wavelength (1400 nm to 1600 nm) range, and kappa values near 300 nm, which matches well with standard single mode fiber. Using the principle of power transfer from the inner core to the outer core after the coupling wavelength, we have investigated possible design of ASE suppressed amplifie...

  19. Growth of new borate crystals with fiber shape by the micro-pulling down technique

    Science.gov (United States)

    Assi, Farah; Ferriol, Michel; Aillerie, Michel; Cochez, Marianne

    2017-07-01

    Borate-based materials are of high interest to generate an UV laser light from a crystal. Fiber-shaped crystals combining the advantages of fiber lasers and crystalline lasers, we have investigated the growing conditions required to obtain usable fibers of Bi2ZnB2O7 (BZBO) and LaBGeO5 (LBGO). For BZBO, the major drawback was the pronounced color of the fibers and for LBGO, it was the high viscosity of its melt leading to use a flux. This paper presents our state of the art to obtain good quality BZBO and LBGO crystal fibers.

  20. Initial steps of supercontinuum generation in photonic crystal fibers

    DEFF Research Database (Denmark)

    Hilligsøe, Karen Marie; Paulsen, H.N.; Thøgersen, J.;

    2003-01-01

    The onset of supercontinuum generation in a photonic crystal fiber is investigated experimentally and numerically as a function of pump wavelength and intensity with 100-fs pulses. Soliton formation is found to be the determining factor in the initial step. The formation and behavior of a blueshi...... of a blueshifted, nonsolitonic component, emitted as the soliton evolves towards the stable regime, is investigated and the role of phase matching through higher-order dispersion is highlighted. Good agreement between experiments and simulations is obtained....

  1. Photonic crystal fiber long-period gratings for biochemical sensing

    DEFF Research Database (Denmark)

    Rindorf, Lars Henning; Jensen, Jesper Bo; Dufva, Hans Martin

    2006-01-01

    -period grating it was possible to measure the thickness of the layer. The long-period gratings were inscribed in a large-mode area silica photonic crystal fiber with a CO2 laser. The thicknesses of a monolayer of poly-L-lysine and double-stranded DNA was measured using the device. We find that the grating has...... a sensitivity of approximately 1.4nm/1nm in terms of the shift in resonance wavelength in nm per nm thickness of biomolecule layer....

  2. Active Photonic crystal fibers for high power applications

    DEFF Research Database (Denmark)

    Olausson, Christina Bjarnal Thulin

    . This plays an important role in high power lasers and ampliers with respect to efficiency, packaging, and thermal handling. The third part of the work has involved developing tools for characterizing the mode quality and stability of large core bers. Stable, single-mode bers with larger cores are essential......The photonic crystal ber technology provides means to realize bers optimized for high power operation, due to the large single-mode cores and the unique design exibility of the microstructure. The work presented in this thesis focuses on improving the properties of active photonic crystal bers...... for high power ber lasers and ampliers, and on adding new functionality to the fibers - all with the purpose of pushing the technology towards high powers. The first part of the work has been to investigate photo darkening, the mitigation of which is crucial in the quest for higher powers. The work has...

  3. Super-flat coherent supercontinuum source in Assub>38.8sub>Sesub>61.2sub> chalcogenide photonic crystal fiber with all-normal dispersion engineering at a very low input energy.

    Science.gov (United States)

    Diouf, Mbaye; Salem, Amine Ben; Cherif, Rim; Saghaei, Hamed; Wague, Ahmadou

    2017-01-10

    We numerically report super-flat coherent mid-infrared supercontinuum (MIR-SC) generation in a chalcogenide Assub>38.8sub>Sesub>61.2sub> photonic crystal fiber (PCF). The dispersion and nonlinear parameters of Assub>38.8sub>Sesub>61.2sub> chalcogenide PCFs by varying the diameter of the air holes are engineered to obtain all-normal dispersion (ANDi) with high nonlinearities. We show that launching low-energy 50 fs optical pulses with 0.88 kW peak power (corresponding to pulse energy of 0.05 nJ) at a central wavelength of 3.7 μm into a 5 cm long ANDi-PCF generates a flat-top coherent MIR-SC spanning from 2900 to 4575 nm with a high spectral flatness of 3 dB. This ultra-wide and flattened spectrum has excellent stability and coherence properties that can be used for MIR applications such as medical diagnosis of diseases, atmospheric pollution monitoring, and drug detection.

  4. Watt-level, all-fiber, ultrafast Er/Yb-codoped double-clad fiber laser mode-locked by reduced graphene oxide interacting with a weak evanescent field

    CERN Document Server

    Gao, Lei; Li, Yujia

    2015-01-01

    We propose a Watt-level, all-fiber, ultrafast Er/Yb-codoped double-clad fiber laser passively mode-locked by reduced graphene oxide (rGO) interacting with a weak evanescent field of photonic crystal fiber (PCF). The rGO solution is filled into the cladding holes of the PCF based on total reflection, and after evaporation, the rGO flakes bear only 1/107 of the total energy in laser system, which enhances the thermal damage threshold and decreases the accumulated nonlinearity. By incorporating the saturable absorber into an Er/Yb-codoped fiber ring cavity, stable conventional soliton with a duration of 573 fs is generated, and a average output power up to 1.14 W is obtained.

  5. Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The fabrication of one kind of large core area Nd3+ doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.

  6. Broad and tunable multiwavelength fiber laser at the assistance of modulation-instability-assisted four-wave mixing

    Science.gov (United States)

    Liu, X. M.

    2010-04-01

    Based on a piece of highly-nonlinear near-zero-dispersion-flattened photonic crystal fiber (PCF), a broadly tunable multiwavelength erbium-doped fiber laser is proposed by using a bi-directionally pumping scheme. This kind of PCF induces the modulation-instability-assisted four-wave mixing to generate new wavelengths. The proposed laser with excellent stability is tunable and switchable by adjusting the fiber Bragg gratings and the variable optical attenuators. The outstanding merits of the proposed multiwavelength laser are the flexible tuning and the ultrabroad spectral range over 150 nm. Especially, the proposed laser source can work at the wavelength of less than 1460 nm, overcoming the limit of gain bandwidth of erbium-doped fiber.

  7. Ytterbium‐doped distributed spectral filtering photonic crystal fibers for use at wavelengths above 1100 nm

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Alkeskjold, Thomas Tanggaard; Lægsgaard, Jesper

    can reach the yellow‐orange light regime through frequency doubling. Yellow‐orange light has applications within the medical industry, high‐resolution spectroscopy and for laser‐guide stars [2]. To achieve amplification at these wavelengths, the larger gain at shorter wavelengths must be suppressed...... to avoid parasitic lasing due to Amplified Spontaneous Emission (ASE) build‐up. Nonlinear effects, such as stimulated Raman scattering, stimulated Brillouin scattering and four‐wave mixing, set the upper limit for achievable powers in fiber amplifiers. To increase the nonlinear threshold, Large...... to a large degree be controlled through index guidance by tuning the air hole diameter. Suppression of unwanted spectral components is realized through bandgap guidance by tailoring the high‐index inclusions. A filter of ASE is thereby incorporated in the PCF cladding. Furthermore the inclusions on one side...

  8. Second-order polarization-mode dispersion in photonic crystal fibers

    DEFF Research Database (Denmark)

    Larsen, T; Bjarklev, Anders Overgaard; Peterson, A

    2003-01-01

    We report the first experimental measurements of second-order polarization-mode dispersion in two successive 900 meter pulls of a silica photonic crystal fiber.......We report the first experimental measurements of second-order polarization-mode dispersion in two successive 900 meter pulls of a silica photonic crystal fiber....

  9. A Dual-Function All-in-Fiber Device Based on Negative Dielectric Liquid Crystal Photonic Bandgap Fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Eskildsen, Lars; Weirich, Johannes;

    2008-01-01

    A dual-function all-in-fiber device based on negative dielectric liquid crystal photonic bandgap fibers is presented. This device can work both as an electrically tunable waveplate in the range 1520nm-1580nm, and as a polarimeter at 1310nm....

  10. Dynamic control of higher-order modes in hollow-core photonic crystal fibers.

    Science.gov (United States)

    Euser, T G; Whyte, G; Scharrer, M; Chen, J S Y; Abdolvand, A; Nold, J; Kaminski, C F; Russell, P St J

    2008-10-27

    We present a versatile method for selective mode coupling into higher-order modes of photonic crystal fibers, using holograms electronically generated by a spatial light modulator. The method enables non-mechanical and completely repeatable changes in the coupling conditions. We have excited higher order modes up to LP(31) in hollow-core photonic crystal fibers. The reproducibility of the coupling allows direct comparison of the losses of different guided modes in both hollow-core bandgap and kagome-lattice photonic crystal fibers. Our results are also relevant to applications in which the intensity distribution of the light inside the fiber is important, such as particle- or atom-guidance.

  11. A Model of PCF in Guarded Type Theory

    DEFF Research Database (Denmark)

    Paviotti, Marco; Møgelberg, Rasmus Ejlers; Birkedal, Lars

    2015-01-01

    of coinductive types. In this paper we investigate how type theory with guarded recursion can be used as a metalanguage for denotational semantics useful both for constructing models and for proving properties of these. We do this by constructing a fairly intensional model of PCF and proving it computationally...... adequate. The model construction is related to Escardo's metric model for PCF, but here everything is carried out entirely in type theory with guarded recursion, including the formulation of the operational semantics, the model construction and the proof of adequacy....

  12. Low-loss tunable all-in-fiber filter for Raman spectroscopy

    DEFF Research Database (Denmark)

    Brunetti, Anna Chiara; Scolari, Lara; Lund-Hansen, Toke

    2011-01-01

    We show a novel in-line Rayleigh-rejection filter for Raman spectroscopy, based on a solid-core Photonic Crystal Fiber (PCF) filled with a high-index material. The device is low-loss and thermally tunable, and allows for a strong attenuation of the Rayleigh line at 532nm and the transmission...... of the Raman lines in a broad wavenumber range....

  13. Photonic crystal fiber long-period gratings for biosensing

    DEFF Research Database (Denmark)

    Rindorf, Lars Henning; Lindvold, Lars René

    2008-01-01

    is very general and can also give estimates to the attenuation constants of the lossy cladding modes as well heat transfer simulations of the rapid, intense heating and cooling during the CO2-laser inscription. As sensors PCF-LPGs are shown to detect layers of biomolecules ∼ 0.25 nm thick on average while...... and numerically. Experimentally, a setup for CO2-laser inscribed LPGs has been constructed. The setup produces LPGs with unprecedented quality and throughput. Numerically, the simulation of PCFLPGs is a demanding task and requires accurate mathematical methods such as the finite element method (FEM). The FEM...

  14. Optimum PCF tapers for blue-enhanced supercontinuum sources

    DEFF Research Database (Denmark)

    Møller, Uffe Visbech; Sørensen, Simon Toft; Larsen, Casper;

    2012-01-01

    Tapering of photonic crystal fibers has proven to be an effective way of blueshifting the dispersive wavelength edge of a supercontinuum spectrum down in the deep-blue. In this article we will review the state-of-the-art in fiber tapers, and discuss the underlying mechanisms of supercontinuum...... generation in tapers. We show, by introducing the concept of a group-acceleration mismatch, that for a given taper length, the downtapering section should be as long as possible to enhance the amount of blueshifted light. We also discuss the noise properties of supercontinuum generation in uniform...

  15. Hollow-core photonic crystal fiber-optic probes for Raman spectroscopy.

    Science.gov (United States)

    Konorov, Stanislav O; Addison, Christopher J; Schulze, H Georg; Turner, Robin F B; Blades, Michael W

    2006-06-15

    We have implemented a new Raman fiber-optic probe design based on a hollow-core photonic-crystal excitation fiber surrounded by silica-core collection fibers. The photonic-crystal fiber offers low attenuation at the pump radiation wavelength, mechanical flexibility, high radiation stability, and low background noise. Because the excitation beam is transmitted through air inside the hollow-core fiber, silica Raman scattering is much reduced, improving the quality of the spectra obtained using probes of this design. Preliminary results show that the new probe design decreases the Raman background from the silica by approximately an order of magnitude compared to solid-core silica Raman probes.

  16. Micro-displacement sensor based on a hollow-core photonic crystal fiber.

    Science.gov (United States)

    Rodrigues Pinto, Ana Margarida; Baptista, José Manuel; Santos, José Luís; Lopez-Amo, Manuel; Frazão, Orlando

    2012-12-17

    A sensing head based on a hollow-core photonic crystal fiber for in-reflection measurement of micro-displacements is presented. The sensing structure takes advantage of the multimodal behavior of a short segment of hollow-core photonic crystal fiber in-reflection, being spliced to a single mode fiber at its other end. A modal interferometer is obtained when the sensing head is close to a mirror, through which displacement is measured.

  17. Highly Nonlinear and Birefringent Spiral Photonic Crystal Fiber

    Directory of Open Access Journals (Sweden)

    S. Revathi

    2014-01-01

    Full Text Available We propose and design a spiral photonic crystal fiber with elliptical air holes for achieving high birefringence, large nonlinearity, and negative dispersion. The structure is designed using chalcogenide glass (As2S3 for different ellipticity ratios of air holes in the cladding and the effect on various properties is observed. The proposed structure has birefringence of the order 10−2, nonlinearity of 26739.42 W−1 m−1, and dispersion of −1136.69 at 0.85 μm. An accurate numerical approach based on finite element method is used for the design and simulation of the structure. Due to high birefringence and negative dispersion, the proposed structure can be used for polarization control and dispersion compensation, respectively.

  18. Tunable and rotatable polarization controller using photonic crystal fiber filled with liquid crystal

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2010-01-01

    We design and fabricate a compact tunable and rotatable polarization controller using liquid crystal photonic band gap fibers. The electrically and thermally induced phase shift in the Poincaré sphere and corresponding birefringence change are measured. The direction of the electric field...... is managed by connecting four electrodes in different electrode configurations, and the thermal tunability is controlled by on-chip heaters. According to the results, a quarter-wave plate and a half-wave plate working in the wavelength range of 1520–1600 nm are experimentally demonstrated....

  19. Silica-air photonic crystal fiber design that permits waveguiding by a true photonic bandgap effect

    DEFF Research Database (Denmark)

    Barkou, Stig Eigil; Broeng, Jes; Bjarklev, Anders Overgaard

    1999-01-01

    A theoretical investigation of a novel type of optical fiber is presented. The operation of the fiber relies entirely on wave guidance through the photonic bandgap effect and not on total internal reflection, thereby distinguishing that fiber from all other known fibers, including recently studied...... photonic crystal fibers. The novel fiber has a central low-index core region and a cladding consisting of a silica background material with air holes situated within a honeycomb lattice structure. We show the existence of photonic bandgaps for the silica–air cladding structure and demonstrate how light can...

  20. Electrically controllable liquid crystal photonic bandgap fiber with dual-frequency control

    DEFF Research Database (Denmark)

    Scolari, Lara; Alkeskjold, Thomas Tanggaard; Riishede, Jesper

    2005-01-01

    We present an electrically tunable liquid crystal photonic bandgap fiber device based on a dual frequency liquid crystal with pre-tilted molecules that allows the bandgaps to be continuously tuned. The frequency dependent behavior of the liquid crystal enables active shifting of the bandgaps toward...

  1. Simultaneous polarization-insensitive phase-space trans-multiplexing and wavelength multicasting via cross-phase modulation in a photonic crystal fiber at 10 GBd

    Science.gov (United States)

    Cannon, Brice M.

    This thesis investigates the all-optical combination of amplitude and phase modulated signals into one unified multi-level phase modulated signal, utilizing the Kerr nonlinearity of cross-phase modulation (XPM). Predominantly, the first experimental demonstration of simultaneous polarization-insensitive phase-transmultiplexing and multicasting (PI-PTMM) will be discussed. The PI-PTMM operation combines the data of a single 10-Gbaud carrier-suppressed return-to-zero (CSRZ) on-off keyed (OOK) pump signal and 4x10-Gbaud return-to-zero (RZ) binary phase-shift keyed (BPSK) probe signals to generate 4x10-GBd RZ-quadrature phase-shift keyed (QPSK) signals utilizing a highly nonlinear, birefringent photonic crystal fiber (PCF). Since XPM is a highly polarization dependent nonlinearity, a polarization sensitivity reduction technique was used to alleviate the fluctuations due to the remotely generated signals' unpredictable states of polarization (SOP). The measured amplified spontaneous emission (ASE) limited receiver sensitivity optical signal-to-noise ratio (OSNR) penalty of the PI-PTMM signal relative to the field-programmable gate array (FPGA) pre-coded RZ-DQPSK baseline at a forward-error correction (FEC) limit of 10-3 BER was ≈ 0.3 dB. In addition, the OSNR of the remotely generated CSRZ-OOK signal could be degraded to ≈ 29 dB/0.1nm, before the bit error rate (BER) performance of the PI-PTMM operation began to exponentially degrade. A 138-km dispersion-managed recirculating loop system with a 100-GHz, 13-channel mixed-format dense-wavelength-division multiplexed (DWDM) transmitter was constructed to investigate the effect of metro/long-haul transmission impairments. The PI-PTMM DQPSK and the FPGA pre-coded RZ-DQPSK baseline signals were transmitted 1,900 km and 2,400 km in the nonlinearity-limited transmission regime before reaching the 10-3 BER FEC limit. The relative reduction in transmission distance for the PI-PTMM signal was due to the additional transmitter

  2. Kagome-type hollow-core photonic crystal fibers for beam delivery and pulse compression of high-power ultrafast lasers

    Science.gov (United States)

    Saraceno, C. J.; Emaury, F.; Diebold, A.; Schriber, C.; Debord, B.; Gérôme, F.; Südmeyer, T.; Benabid, F.; Keller, U.

    2015-02-01

    Tremendous progress has been achieved in the last years in the field of ultrafast high-power sources. Among the different laser technologies driving this progress, thin-disk lasers (TDLs) have gained significant ground, both from amplifiers and modelocked oscillators. Modelocked TDLs are particularly attractive, as they allow for unprecedented high energy and average powers directly from an oscillator. The exponential progress in the performance of these sources drives growing needs for efficient means of beam delivery and pulse compression at high average power ( 10 MW). This remains a challenging regime for standard fiber solutions: microstructured large-mode-area silica photonic-crystal fibers (PCFs) are good candidates, but peak powers are limited to ≈4-6 MW by self-focusing. Hollow-core (HC) capillaries are adapted for higher peak powers, but exhibit high losses and are not suitable for compact beam delivery. In parallel to the progress achieved in the performance of ultrafast laser systems, recent progress in novel hollow-core PCF designs are currently emerging as an excellent solution for these challenges. In particular, Inhibited-coupling Kagome-type HC-PCFs are particularly promising: their intrinsic guiding properties allow for extremely high damage thresholds, low losses over wide transmission windows and ultra-low dispersion. In our most recent results, we achieve pulse compression in the hundred-watt average power regime using Kagome-type HC-PCFs. We launch 127-W, 18-μJ, 740-fs pulses from our modelocked TDL into an Ar-filled fiber (13 bar), reaching 93% transmission. The resulting spectral broadening allows us to compress the pulses to 88 fs at 112 W of average power, reaching 105 MW of peak power, at 88% compression efficiency. These results demonstrate the outstanding suitability of Kagome HC-PCFs for compression and beam delivery of state-of-the-art kilowatt-class ultrafast systems.

  3. Photonic crystal distributed feedback fiber lasers with Bragg gratings

    DEFF Research Database (Denmark)

    Søndergaard, Thomas

    2000-01-01

    Two new types of optical fibers, where air-holes are running down their length, are considered for making fiber lasers with Bragg gratings. The mode areas for pump and signal in these fiber lasers may be either larger or smaller compared to the corresponding mode areas for fiber lasers based on s...... on standard step index fibers. This makes possible realization of fiber lasers with a low pump threshold (small mode area), and fiber lasers suitable for high-power applications (large mode area)......Two new types of optical fibers, where air-holes are running down their length, are considered for making fiber lasers with Bragg gratings. The mode areas for pump and signal in these fiber lasers may be either larger or smaller compared to the corresponding mode areas for fiber lasers based...

  4. A test resonator for Kagome Hollow-core Photonic Crystal Fibers for resonant rotation sensing

    Science.gov (United States)

    Fsaifes, Ihsan; Feugnet, Gilles; Ravaille, Alexia; Debord, Benoït; Gérôme, Frédéric; Baz, Assaad; Humbert, Georges; Benabid, Fetah; Schwartz, Sylvain; Bretenaker, Fabien

    2017-01-01

    We build ring resonators to assess the potentialities of Kagome Hollow-Core Photonic Crystal Fibers for future applications to resonant rotation sensing. The large mode diameter of Kagome fibers permits to reduce the free space fiber-to-fiber coupling losses, leading to cavities with finesses of about 30 for a diameter equal to 15 cm. Resonance linewidths of 3.2 MHz with contrasts as large as 89% are obtained. Comparison with 7-cell photonic band gap (PBG) fiber leads to better finesse and contrast with Kagome fiber. Resonators based on such fibers are compatible with the angular random walk required for medium to high performance rotation sensing. The small amount of light propagating in silica should also permit to further reduce the Kerr-induced non-reciprocity by at least three orders of magnitudes in 7-cell Kagome fiber compared with 7-cell PBG fiber.

  5. Triple-wavelength switchable multiwavelength erbium-doped fiber laser based on a highly nonlinear photonic crystal fiber

    Energy Technology Data Exchange (ETDEWEB)

    Han, Young-Geun [Hanyang University, Seoul (Korea, Republic of)

    2010-04-15

    We propose and experimentally investigate a novel scheme for a triple-wavelength switchable multiwavelength erbium-doped fiber laser based on a highly nonlinear photonic crystal fiber incorporating a multiply-phase-shifted fiber Bragg grating. A nonlinear optical loop mirror based on a highly nonlinear photonic crystal fiber is exploited to suppress the homogeneous line broadening of an erbium-doped fiber amplifier and to provide the triple lasing wavelength switchability. A multiply phase-shifted fiber Bragg grating with three channels, depending on the number of phase-shifted segments, is implemented to establish a multichannel filter and to generate the multiwavelength output. A high-quality multiwavelength output with a high extinction ratio of {approx}45 dB and a high output flatness of {approx}0.3 dB is realized. The switching performance to provide lasing-wavelength selectivity can be realized by using a nonlinear polarization rotation based on a nonlinear optical loop mirror. The lasing wavelength can be switched individually by controlling both the polarization controller within the nonlinear optical loop mirror and the cavity loss. The proposed multiwavelength fiber laser can be operated in the single-, dual-, and triple-lasing wavelength states. Based on the bending technique, the lasing wavelength of the proposed multiwavelength erbium-doped fiber laser can be readily controlled, and its tunability was measured to be {approx}7.2 nm/m{sup -1}.

  6. 基于PCF的气体传感技术在瓦斯监测中的应用%Application of gas sensing technology in gas monitoring based on PCF

    Institute of Scientific and Technical Information of China (English)

    单亚锋; 孙朋; 徐耀松

    2013-01-01

    为了满足煤矿瓦斯监测的需要,阐述了一种利用金属化封装技术长周期光子晶体光纤(PCF)光栅瓦斯体积分数探测器,并在PCF上采用热激法写制长周期光栅(LPG),并且对系统的温度稳定性进行了测试.测试结果表明:基于PCF光栅的探测器具有很好的温度稳定性,从而可以弥补以往瓦斯探测器的温度影响因素.将制作的瓦斯体积分数探测器在实验室建立的煤矿巷道的物理模型中进行了瓦斯体积分数的测量,在巷道内采用了波分复用技术克服以往有限的复用容量问题,从而准确地确定煤矿巷道内瓦斯的分布情况,当瓦斯体积分数的测量值高于安全设定值时,就会驱动报警控制器发出警示.%In order to meet the need of coal mine gas monitoring,describes a photonic crystal fiber(PCF) gas volume fraction detector that is packed using metalized encapsulating technique,and heat shock method is used for PCF to write long period gratings.At the same time,the temperature stability of the system is tested.Test results show that the system has a good temperature stability with the PCF grating detectors,which can make up for the temperature influencing factors compared with previous gas detectors.The physical model of gas volume fraction detector set up in lab for the coal mine tunnel is established to detect the gas volume fraction,and WDM technology is used to overcome the limited multiplexing capacity issues in the roadway.In order to determine the gas distribution of coal mine roadway,when the measured value of the gas volume fraction is higher than the security setting,the system will drive alarm controller to send out warning.

  7. Influence on photonic crystal fiber dispersion of the size of air holes in different rings within the cladding

    Institute of Scientific and Technical Information of China (English)

    Yanfeng Li(栗岩锋); Bowen Liu(刘博文); zhihang Wang(王子涵); Minglie Hu(胡明列); Qingyue Wang(王清月)

    2004-01-01

    @@ The influence on photonic crystal fiber dispersion of the size of air holes in different rings within thecladding is investigated using a semivectorial finite difference method.Numerical results reveal that thephotonic crystal fiber dispersion is more sensitive to the variation of the air hole size in the first and secondrings,indicating that design of photonic crystal fibers with desirable dispersion properties requires moreprecise control of the paxameters of the air holes in the vicinity of the fiber core.

  8. Intermodal parametric gain of degenerate four wave mixing in large mode area hybrid photonic crystal fibers

    OpenAIRE

    Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2013-01-01

    Intermodal degenerate four wave mixing (FWM) is investigated numerically in large mode area hybrid photonic crystal fibers. The dispersion is controlled independently of core size, and thus allows for power scaling of the FWM process.

  9. Experimental study on all Yb-doped photonic crystal fiber laser

    Science.gov (United States)

    Fu, Jian; Hou, Zhiyun; Zhou, Guiyao; Zhao, Jingde; Zhang, Wei; Xia, Changming; Cang, Xuelong; Liu, Jiantao

    2017-02-01

    In this paper, we demonstrated an experiment of the all Yb-doped photonic crystal fiber laser using free space optical paths method. The experimental setup of all Yb-doped photonic crystal fiber laser is composed of the seed laser and the amplifier. The laser gain medium of the seed laser and the amplifier are the same Yb-doped photonic crystal fibers that are fabricated by non-chemical vapor deposition (Non-CVD) technology. The seed laser cavity is a Fabry-Perot cavity. The amplifier is pumped by back-end method. They are coupled each other by lens and dichroic mirrors on the optical table. The experimental results have a good reference value for the photonic crystal fiber laser research in the future.

  10. Fiber-optic Michelson interferometer with high sensitivity based on a liquid-filled photonic crystal fiber

    Science.gov (United States)

    Hsu, Jui-Ming; Horng, Jing-Shyang; Hsu, Chia-Ling; Lee, Cheng-Ling

    2014-11-01

    This study proposes an ultracompact and highly sensitive liquid-filled photonic crystal fiber Michelson interferometer (LF-PCFMI) based on material dispersion engineering. Numerical simulations and experimental measurements are performed in the work, and both of their results show that the temperature sensitivity can be more greatly improved than those of conventional photonic crystal fiber interferometers (PCFIs). The experimental results indicate that a very high sensitivity with interference wavelength shifts of almost 27 nm within temperature variation of 5 °C has been achieved by the configuration. Numerical analysis for the proposed LF-PCFMI also exhibits a good agreement with the results of the experimental measurements.

  11. A model of PCF in guarded type theory

    DEFF Research Database (Denmark)

    Paviotti, Marco; Møgelberg, Rasmus Ejlers; Birkedal, Lars

    2015-01-01

    Guarded recursion is a form of recursion where recursive calls are guarded by delay modalities. Previous work has shown how guarded recursion is useful for constructing logics for reasoning about programming languages with advanced features, as well as for constructing and reasoning about elements...... of coinductive types. In this paper we investigate how type theory with guarded recursion can be used as a metalanguage for denotational semantics useful both for constructing models and for proving properties of these. We do this by constructing a fairly intensional model of PCF and proving it computationally...... adequate. The model construction is related to Escardo's metric model for PCF, but here everything is carried out entirely in type theory with guarded recursion, including the formulation of the operational semantics, the model construction and the proof of adequacy...

  12. Crystallization kinetics and morphology of melt spun poly(ethylene terephthalate nanocomposite fibers

    Directory of Open Access Journals (Sweden)

    R. R. Hegde

    2013-10-01

    Full Text Available Natural nanoclay closite Na+ incorporated melt spun poly(ethylene terephthalate (PET fibers were investigated for crystallization kinetics and morphology. Nature of clay dispersion and nanocomposite morphology were assessed using wide angle X-ray diffraction (WAXD and transmission electron microscopy (TEM. Fiber mechanical properties were measured using single fiber tensile test. Combination of scanning electron microscopy (SEM and energy dispersive spectroscopy (EDS was used to investigate the fiber failure mode. Among nanocomposite PET fibers, sample with 1% clay performed better. WAXD and TEM micrographs of the fibers revealed intercalated and delaminated morphology. Size of agglomerate increased with percentage of add-on. SEM surface images showed significant variation in fiber diameter, voids and imperfections. Cross-sections of fractured surfaces revealed the presence of clay agglomerates at failure spots. Nanoclay reinforcement did not incur mechanical property benefits due to increase in voids and agglomerates in fiber section, especially at loading levels higher than one percent.

  13. Design of highly sensitive multichannel bimetallic photonic crystal fiber biosensor

    Science.gov (United States)

    Hameed, Mohamed Farhat O.; Alrayk, Yassmin K. A.; Shaalan, Abdelhamid A.; El Deeb, Walid S.; Obayya, Salah S. A.

    2016-10-01

    A design of a highly sensitive multichannel biosensor based on photonic crystal fiber is proposed and analyzed. The suggested design has a silver layer as a plasmonic material coated by a gold layer to protect silver oxidation. The reported sensor is based on detection using the quasi transverse electric (TE) and quasi transverse magnetic (TM) modes, which offers the possibility of multichannel/multianalyte sensing. The numerical results are obtained using a finite element method with perfect matched layer boundary conditions. The sensor geometrical parameters are optimized to achieve high sensitivity for the two polarized modes. High-refractive index sensitivity of about 4750 nm/RIU (refractive index unit) and 4300 nm/RIU with corresponding resolutions of 2.1×10-5 RIU, and 2.33×10-5 RIU can be obtained according to the quasi TM and quasi TE modes of the proposed sensor, respectively. Further, the reported design can be used as a self-calibration biosensor within an unknown analyte refractive index ranging from 1.33 to 1.35 with high linearity and high accuracy. Moreover, the suggested biosensor has advantages in terms of compactness and better integration of microfluidics setup, waveguide, and metallic layers into a single structure.

  14. Intermodal parametric gain of degenerate four wave mixing in large mode area hybrid photonic crystal fibers

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2013-01-01

    Intermodal degenerate four wave mixing (FWM) is investigated numerically in large mode area hybrid photonic crystal fibers. The dispersion is controlled independently of core size, and thus allows for power scaling of the FWM process.......Intermodal degenerate four wave mixing (FWM) is investigated numerically in large mode area hybrid photonic crystal fibers. The dispersion is controlled independently of core size, and thus allows for power scaling of the FWM process....

  15. Boundaries of Parametric Gain due to Four-wave Mixing in Hybrid Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2014-01-01

    Parametric gain by four-wave mixing is considered in photonic crystal fibers for an undepleted pump. The mode distributions are wavelength dependent, thus field overlap integrals cannot be simplified, and an extended gain region is observed......Parametric gain by four-wave mixing is considered in photonic crystal fibers for an undepleted pump. The mode distributions are wavelength dependent, thus field overlap integrals cannot be simplified, and an extended gain region is observed...

  16. Polarization switch of four-wave mixing in large mode area hybrid photonic crystal fibers

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Alkeskjold, Thomas Tanggaard; Olausson, Christina Bjarnal Thulin;

    2015-01-01

    Degenerate spontaneous four-wave mixing is considered in a large mode area hybrid photonic crystal fiber. Numerical and experimental results show birefringence assisted four-wave mixing for a certain polarization state of the pump field. The parametric gain can be turned on and off by switching...... the polarization state of the pump field between the two principal axis of the hybrid photonic crystal fiber. (C) 2015 Optical Society of America...

  17. Polarization switch of four-wave mixing in large mode area hybrid photonic crystal fibers.

    Science.gov (United States)

    Petersen, Sidsel R; Alkeskjold, Thomas T; Olausson, Christina B; Lægsgaard, Jesper

    2015-02-15

    Degenerate spontaneous four-wave mixing is considered in a large mode area hybrid photonic crystal fiber. Numerical and experimental results show birefringence assisted four-wave mixing for a certain polarization state of the pump field. The parametric gain can be turned on and off by switching the polarization state of the pump field between the two principal axis of the hybrid photonic crystal fiber.

  18. Extremely Low Loss THz Guidance Using Kagome Lattice Porous Core Photonic Crystal Fiber

    DEFF Research Database (Denmark)

    Hossain, Anwar; Hasanuzzaman, G.K.M.; Habib, Selim;

    2015-01-01

    A novel porous core Kagome lattice photonic crystal fiber is proposed for extremely low loss THz waves guiding. It has been reported that 82.5% of bulk effective material loss of Topas can be reduced......A novel porous core Kagome lattice photonic crystal fiber is proposed for extremely low loss THz waves guiding. It has been reported that 82.5% of bulk effective material loss of Topas can be reduced...

  19. Optimization of Tapered Photonic Crystal Fibers for Blue-Enhanced Supercontinuum Generation

    DEFF Research Database (Denmark)

    Møller, Uffe; Sørensen, Simon Toft; Larsen, Casper;

    2012-01-01

    Tapering of photonic crystal fibers is an effective way of shifting the dispersive wavelength edge of a supercontinuum spectrum down in the deep-blue. We discuss the optimum taper profile for blue-enhanced supercontinuum generation.......Tapering of photonic crystal fibers is an effective way of shifting the dispersive wavelength edge of a supercontinuum spectrum down in the deep-blue. We discuss the optimum taper profile for blue-enhanced supercontinuum generation....

  20. Soliton compression to few-cycle pulses using quadratic nonlinear photonic crystal fibers: A design study

    DEFF Research Database (Denmark)

    Bache, Morten; Moses, Jeffrey; Lægsgaard, Jesper;

    2007-01-01

    We show theoretically that high-quality soliton compression from ~500 fs to ~10 fs is possible in poled silica photonic crystal fibers using cascaded (2):(2) nonlinearities. A moderate group-velocity mismatch optimizes the compression.......We show theoretically that high-quality soliton compression from ~500 fs to ~10 fs is possible in poled silica photonic crystal fibers using cascaded (2):(2) nonlinearities. A moderate group-velocity mismatch optimizes the compression....

  1. Supercontinuum generation in a photonic crystal fiber pumped by a gain-switched high-power fiber laser

    DEFF Research Database (Denmark)

    Larsen, Casper; Skovgaard, Peter M. W.; Noordegraaf, Danny;

    2011-01-01

    Supercontinuum (SC) generation in nonlinear photonic crystal fibers (NLF) using continuous-wave (CW) fiber lasers for pumping has been studied before[1,2]. The advantages of CW-SC are high spectral smoothness, high spectral power density, simplicity of the system, and lower noise than the more...... common picosecond-pumped SC. The cost of these features is increased nonlinear fiber lengths due to less efficient nonlinear processes at the lower power levels. Especially, the generation of light in the visible wavelength range has been a challenge. This has previously been tackled by increasing...

  2. Applications of photonic crystal fibers in optical communications - What is in the future?

    DEFF Research Database (Denmark)

    Bjarklev, Anders Overgaard; Lin, Chinlon

    2005-01-01

    Superior control of guiding properties in photonic-crystal fibers led to several interesting applications in optical communications ranging from nonlinear optical signal processing to high-power fiber amplifiers. This paper will review recent developments and discuss the future possibilities....

  3. Sensitivity of photonic crystal fiber grating sensors: biosensing, refractive index, strain, and temperature sensing

    DEFF Research Database (Denmark)

    Rindorf, Lars Henning; Bang, Ole

    2008-01-01

    We study the sensitivity of fiber grating sensors in the applications of strain, temperature, internal label-free biosensing, and internal refractive index sensing. New analytical expressions for the sensitivities, valid for photonic crystal fibers are rigorously derived. These are generally valid...

  4. Small core Chalcogenide photonic crystal fiber for midinfrared wavelength conversion: experiment and design

    OpenAIRE

    Xing, Sida; Grassani, Davide; Kharitonov, Svyatoslav; Billat, Adrien; Brès, Camille-Sophie

    2016-01-01

    Kerr index and dispersion parameter of a small core chalcogenide photonic crystal fiber are estimated via four-wave mixing near 2μm. From these values, new fiber design is proposed to efficiently generate idlers in mid-infrared.

  5. Coherent anti-Stokes Raman scattering microscopy with a photonic crystal fiber based light source

    DEFF Research Database (Denmark)

    Paulsen, H.N.; Hilligsøe, Karen Marie; Thøgersen, J.

    2003-01-01

    A coherent anti-Stokes Raman scattering microscope based on a Ti:sapphire femtosecond oscillator and a photonic crystal fiber is demonstrated. The nonlinear response of the fiber is used to generate the additional wavelength needed in the Raman process. The applicability of the setup is demonstra...... is demonstrated by imaging of micrometer-sized polystyrene beads....

  6. Comparative properties of cellulose nano-crystals from native and mercerized cotton fibers

    Science.gov (United States)

    Stable aqueous suspensions of cellulose nano-crystals (CNCs) were fabricated from both native and mercerized cotton fibers by sulfuric acid hydrolysis, followed by high-pressure homogenization. Fourier Transform Infrared Spectrometry and Wide-angle X-Ray Diffraction data showed that the fibers had b...

  7. Thermo-optical properties of air-clad photonic crystal fiber lasers in high power operation

    Science.gov (United States)

    Limpert, J.; Schreiber, T.; Liem, A.; Nolte, S.; Zellmer, H.; Peschel, T.; Guyenot, V.; Tünnermann, A.

    2003-11-01

    We report on the investigation of the thermo-optical behavior of air-clad ytterbium-doped large-mode-area photonic crystal fiber lasers. Analytical and numerical models are applied to calculate the heat distribution and induced stresses in a microstructured fiber. The results are compared to conventional double-clad fiber lasers and design guidelines are provided to ensure maximum heat dissipation and scalability to power levels of several kWs.

  8. Four-wave mixing instabilities in tapered and photonic crystal fibers

    OpenAIRE

    Biancalana, Fabio; Skryabin, Dmitry V.; Ortigosa-Blanch, Arturo

    2002-01-01

    We present an analytical study of four-wave mixing instabilities in tapered fibers and photonic crystal fibers. Our approach avoids the use of Taylor expansion for the linear susceptibility and the slowly-varying envelope approximation. This allows us to describe the generation of sidebands strongly detuned from the pump wave with simultaneous account for the entire dispersion characteristic of a fiber, which is found to be important for describing properly the key role of the parametric inst...

  9. Three-Dimensional Thermal Analysis of 18-Core Photonic Crystal Fiber Lasers

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yi-Bo; YAO Jian-Quan; ZHANG Lei; WANG Yuan; WEN Wu-Qi; JING Lei; DI Zhi-Gang

    2012-01-01

    The three-dimensional thermal properties of 18-core photonic crystal fiber lasers operated under natural convection are investigated. The temperature sensing technique based on a fiber Bragg grating sensor array is proposed to measure the longitudinal temperature distribution of a 1.6-m-long ytterbium-doped 18-core photonic crystal fiber. The results show that the temperature decreases from the pump end to the launch end exponentially. Moreover, the radial temperature distribution of the fiber end is investigated by using the full-vector finite-element method. The numerical results match well with the experimental data and the coating temperature reaches 422.7K, approaching the critical value of polymer cladding, when the pumping power is 40 W. Therefore the fiber end cooling is necessary to achieve power scaling. Compared with natural convection methods, the copper cooling scheme is found to be an effective method to reduce the fiber temperature.%The three-dimensional thermal properties of 18-core photonic crystal fiber lasers operated under natural convection are investigated.The temperature sensing technique based on a fiber Bragg grating sensor array is proposed to measure the longitudinal temperature distribution of a 1.6-m-long ytterbium-doped 18-core photonic crystal fiber.The results show that the temperature decreases from the pump end to the launch end exponentially.Moreover,the radial temperature distribution of the fiber end is investigated by using the full-vector finite-element method.The numerical results match well with the experimental data and the coating temperature reaches 422.7K,approaching the critical value of polymer cladding,when the pumping power is 40 W.Therefore the fiber end cooling is necessary to achieve power scaling.Compared with natural convection methods,the copper cooling scheme is found to be an effective method to reduce the fiber temperature.

  10. Bending Loss Analysis of Optical Fiber with Out-Cladding of Photonic Crystals

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new type of optical fiber is presented here. It consists of a coaxial optical fiber, bounded by dielectric, multilayer and omnidirectional reflecting mirrors. Jones matrix method is used to analyze the influence of the layer number of one-Dimensional (1D) photonic crystals on their reflectivity. The numerical results show that this type of fiber can be used to guide light around sharp bends whose radius of curvature can be as small as the wavelength of light without significant scattering losses.

  11. Square-lattice large-pitch hollow-core photonic crystal fiber

    DEFF Research Database (Denmark)

    Couny, F.; Roberts, John; Birks, T.A.;

    2008-01-01

    We report on the design, fabrication and characterization of silica square-lattice hollow core photonic crystal fibers optimized for low loss guidance over an extended frequency range in the mid-IR region of the optical spectrum. The fiber's linear optical properties include an ultra-low group...... velocity dispersion and a polarization cross-coupling as low as -13.4dB over 10m of fiber....

  12. Electromagnetically induced transparency in Rb-filled coated hollow-core photonic crystal fiber

    Science.gov (United States)

    Light, P. S.; Benabid, F.; Couny, F.; Maric, M.; Luiten, A. N.

    2007-05-01

    We report the observation of lambda-configuration electromagnetically induced transparency as well as optical pumping in rubidium-filled kagome-structure hollow-coated-core photonic crystal fiber. We show that a polydimethylsiloxane coating of the fiber core reduces the linewidth of the transparency below that which could be expected for an uncoated fiber. The measured 6 MHz linewidth was dominated by optical broadening.

  13. Reduction of Guided Acoustic Wave Brillouin Scattering in Photonic Crystal Fibers

    CERN Document Server

    Elser, D; Gloeckl, O; Korn, A; Leuchs, G; Lorenz, S; Marquardt, C; Marquardt, Ch.

    2005-01-01

    Guided Acoustic Wave Brillouin Scattering (GAWBS) generates phase and polarization noise of light propagating in glass fibers. This excess noise affects the performance of various experiments operating at the quantum noise limit. We experimentally demonstrate the reduction of GAWBS noise in a photonic crystal fiber in a broad frequency range using cavity sound dynamics. We compare the noise spectrum to the one of a standard fiber and observe a roughly 10-fold noise reduction in the frequency range up to 200 MHz.

  14. Overcoming drug crystallization in electrospun fibers--Elucidating key parameters and developing strategies for drug delivery.

    Science.gov (United States)

    Seif, Salem; Franzen, Lutz; Windbergs, Maike

    2015-01-15

    For the development of novel therapeutics, uncontrolled crystallization of drugs within delivery systems represents a major challenge. Especially for thin and flexible polymeric systems such as oral films or dermal wound dressings, the formation and growth of drug crystals can significantly affect drug distribution and release kinetics as well as physical storage stability. In this context, electrospinning was introduced as a fabrication technique with the potential to encapsulate drugs within ultrafine fibers by rapid solvent evaporation overcoming drug crystallization during fabrication and storage. However, these effects could so far only be shown for specific drug-polymer combinations and an in-depth understanding of the underlying processes of drug-loaded fiber formation and influencing key parameters is still missing. In this study, we systematically investigated crystal formation of caffeine as a model drug in electrospun fibers comparing different polymers. The solvent polarity was found to have a major impact on the drug crystal formation, whereas only a minor effect was attributed to the electrospinning process parameters. Based on an in-depth understanding of the underlying processes determining drug crystallization processes in electrospun fibers, key parameters could be identified which allow for the rational development of drug-loaded electrospun fibers overcoming drug crystallization.

  15. The emulsion crystallization of hydrogenated castor oil into long thin fibers

    Science.gov (United States)

    De Meirleir, Niels; Pellens, Linda; Broeckx, Walter; De Malsche, Wim

    2013-11-01

    The present study discusses the optimal crystal growth conditions required for the emulsion crystallization of hydrogenated castor oil (HCO) into several crystal morphologies. The best possible crystal shape is furthermore identified in case high rheology modifying performance is required. HCO was crystallized in a meso- and micro-continuous process which allowed for a controlled and fast screening of several crystal morphologies at different crystallization conditions. Applying high isothermal temperatures (above 55 °C) resulted in a combination of rosettes, thick fibers and thin fibers. At lower isothermal temperatures (below 55 °C) the shape gradually evolved to a combination of short needles, spherically shaped and/or irregularly shaped crystals. Crystals with the highest aspect ratio were obtained when crystals were grown between 30 °C and 45 °C and were subsequently reheated above 63 °C, forming high amounts of large thin fibrous crystals. When diluted to 0.25 wt% these fibrous crystals increased the low shear viscosity far better compared to the other crystal shapes.

  16. Supercontinuum generation in a photonic crystal fiber with two zero dispersion wavelengths

    DEFF Research Database (Denmark)

    Hilligsøe, Karen Marie; Andersen, T.V.; Paulsen, H.N.;

    2004-01-01

    -wave mixing and not soliton fission as in the initial photonic crystal fibers. The supercontinuum has high spectral density and is extremely independent of the input pulse over a wide range of input pulse parameters. Simulations show that the supercontinuum can be compressed to ultrashort pulses.......We demonstrate supercontinuum generation in a highly nonlinear photonic crystal fiber with two closely lying zero dispersion wavelengths. The special dispersion of the fiber has a profound influence on the supercontinuum which is generated through self-phase modulation and phasematched four...

  17. Genetic algorithms optimization of photonic crystal fibers for half diffraction angle reduction of output beam.

    Science.gov (United States)

    Lu, Jyun-Hong; Cai, Dong-Po; Tsai, Ya-Lun; Chen, Chii-Chang; Lin, Chu-En; Yen, Ta-Jen

    2014-09-22

    In this work, we optimize the structure of the photonic crystal fibers by using genetic algorithms to provide strong light confinement in fiber and small half diffraction angle of output beam. Furthermore, this article shows the potentials of this study, such as optimizing three purposes at the same time and the arbitrary structure design is achieved. We report two optimized results obtained by different optimization conditions. The results show that the half diffraction angle of the output beam of the photonic crystal fibers can be reduced.

  18. Supercontinuum generation in a photonic crystal fiber with two zero dispersion wavelengths

    DEFF Research Database (Denmark)

    Hilligsøe, Karen Marie; Andersen, Thomas Vestergaard; Paulsen, Henrik Nørgaard

    2004-01-01

    We demonstrate supercontinuum generation in a highly nonlinear photonic crystal fiber with two closely lying zero dispersion wavelengths. The special dispersion of the fiber has a profound influence on the supercontinuum which is generated through self-phase modulation and phasematched four-wave...... mixing and not soliton fission as in the initial photonic crystal fibers. The supercontinuum has high spectral density and is extremely independent of the input pulse over a wide range of input pulse parameters. Simulations show that the supercontinuum can be compressed to ultrashort pulses....

  19. Polarization splitter based on dual core liquid crystal-filled holey fiber

    Science.gov (United States)

    Wang, Er-Lei; Jiang, Hai-Ming; Xie, Kang; Chen, Chun; Hu, Zhi-Jia

    2016-09-01

    Through filling the liquid crystal into the air holes of a dual-core holey fiber with a simple structure, the transmission mechanism of the fiber is changed from total internal reflection to photonic bandgap (PBG), and a polarization splitter based on the liquid crystal-filled dual-core PBG holey fiber is investigated. The results demonstrate that, by setting appropriate geometrical parameters, the polarization splitter possesses a short length of 890.5 μm, and its wide bandwidth of ˜150 nm almost covers all the S, C, and L communication bands. Besides, it has an excellent electro-interference-resistance property and certain sensitivity to temperature.

  20. High Thermal and Electrical Tunability of Negative Dielectric Liquid Crystal Photonic Bandgap Fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Scolari, Lara; Weirich, Johannes;

    2008-01-01

    We infiltrate photonic crystal fibers with negative dielectric liquid crystals. 400nm bandgap shift is obtained in the range 22ºC-80ºC and 119nm shift of the long-wavelength bandgap edge is achieved by applying a voltage of 200V....

  1. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION

    Energy Technology Data Exchange (ETDEWEB)

    A. Wang; G. Pickrell; R. May

    2002-09-10

    material were thoroughly investigated to determine an optimal approach for on-line, real-time, reliable, long-term monitoring of temperatures inside the coal gasification environment. Among these were a sapphire fiber extrinsic Fabry-Perot interferometric (EFPI) sensor; an intensity-measurement based polarimetric sapphire sensor and a broadband polarimetric differential interferometric (BPDI) sapphire sensor. Based on the current evaluation and analysis of the experimental results, the broadband polarimetric differential interferometric (BPDI) sensor system was chosen for further prototype instrumentation development because of it's superior performance compared to the other systems. This approach is based on the self-calibrating measurement of the optical path length differences in a single-crystal sapphire disk, which is a function of both the temperature dependent birefringence and the temperature dependent dimensional changes.

  2. Single-Crystal Sapphire Optical Fiber Sensor Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Pickrell, Gary [Virginia Polytechnic Inst. & State Univ., Blacksburg, VA (United States); Scott, Brian [Virginia Polytechnic Inst. & State Univ., Blacksburg, VA (United States); Wang, Anbo [Virginia Polytechnic Inst. & State Univ., Blacksburg, VA (United States); Yu, Zhihao [Virginia Polytechnic Inst. & State Univ., Blacksburg, VA (United States)

    2013-12-31

    This report summarizes technical progress on the program “Single-Crystal Sapphire Optical Fiber Sensor Instrumentation,” funded by the National Energy Technology Laboratory of the U.S. Department of Energy, and performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. This project was completed in three phases, each with a separate focus. Phase I of the program, from October 1999 to April 2002, was devoted to development of sensing schema for use in high temperature, harsh environments. Different sensing designs were proposed and tested in the laboratory. Phase II of the program, from April 2002 to April 2009, focused on bringing the sensor technologies, which had already been successfully demonstrated in the laboratory, to a level where the sensors could be deployed in harsh industrial environments and eventually become commercially viable through a series of field tests. Also, a new sensing scheme was developed and tested with numerous advantages over all previous ones in Phase II. Phase III of the program, September 2009 to December 2013, focused on development of the new sensing scheme for field testing in conjunction with materials engineering of the improved sensor packaging lifetimes. In Phase I, three different sensing principles were studied: sapphire air-gap extrinsic Fabry-Perot sensors; intensity-based polarimetric sensors; and broadband polarimetric sensors. Black body radiation tests and corrosion tests were also performed in this phase. The outcome of the first phase of this program was the selection of broadband polarimetric differential interferometry (BPDI) for further prototype instrumentation development. This approach is based on the measurement of the optical path difference (OPD) between two orthogonally polarized light beams in a single-crystal sapphire disk. At the beginning of Phase II, in June 2004, the BPDI sensor was tested at the Wabash River coal gasifier

  3. Light Diffraction of Aligned Polymer Fibers Periodically Dispersed by Phase Separation of Liquid Crystal and Polymer

    Science.gov (United States)

    Murashige, Takeshi; Fujikake, Hideo; Sato, Hiroto; Kikuchi, Hiroshi; Kurita, Taiichiro; Sato, Fumio

    2004-12-01

    We have confirmed light diffraction of aligned polymer fibers obtained by a phase separation of an anisotropic-phase solution of liquid crystal and polymer. He—Ne laser light passing through the polymer fibers was scattered in the axis vertical to the fibers, and had two peaks of light intensity symmetrical to the center of the transmitting laser spot. The two peaks were found to be caused by light diffraction due to the periodic polymer-fiber dispersion because the peaks corresponded to values calculated by intervals between the fibers. The periodical fiber networks are considered to be formed by anisotropic spinodal decomposition. This effect can be used to measure the dispersion order of the polymer fibers.

  4. Influence of surface treatment of carbon fibers on electrochemical crystallization of calcium phosphate

    Institute of Scientific and Technical Information of China (English)

    TAO Ke; HUANG Su-ping; ZHOU Ke-chao

    2005-01-01

    Electrodeposition technique was used to coat calcium phosphate on carbon fiber which can be used to reinforce hydroxyapatite. The differences between fibers treated with and without nitric acid in electrodeposition were evaluated. The X-ray diffractometry results show that CaHPO4·2H2O is obtained as the kind of calcium phosphate coating on carbon fiber. The scanning electron microscopy photographs and deposit kinetic curve indicate that the influences of the functional group attained by nitric acid treatment, the crystal morphology and crystallization of the coating layers on the fiber with and without treatment rate are obviously different. The functional group, especially the acidic group, can act as nucleation centers of electrochemical crystallization.

  5. Double-clad hollow core photonic crystal fiber for coherent Raman endoscope.

    Science.gov (United States)

    Brustlein, Sophie; Berto, Pascal; Hostein, Richard; Ferrand, Patrick; Billaudeau, Cyrille; Marguet, Didier; Muir, Alistair; Knight, Jonathan; Rigneault, Hervé

    2011-06-20

    Performing label free coherent anti-Stokes Raman scattering (CARS) and stimulated Raman scattering (SRS) in endoscope imaging is a challenge, with huge potential clinical benefit. To date, this goal has remained inaccessible because of the inherent coherent Raman noise that is generated in the fiber itself. By developing double-clad hollow core photonic crystal fiber, we demonstrate coherent anti-Stokes Raman scattering and stimulated Raman scattering in an 'endoscope-like' scheme. Both the excitation beams and the collected CARS and SRS signals travel through the same fiber. No CARS and SRS signals are generated within the hollow core fiber even for temporally overlapping pump and Stokes beams, leading to excellent image quality. The CARS and SRS signals generated in the sample are coupled back into a high numerical aperture multimode cladding surrounding the central photonic crystal cladding. We demonstrate this scheme by imaging molecular vibrational bonds of organic crystal deposited on a glass surface.

  6. Research of photonic crystal fiber temperature sensor with mixture liquid filling%填充混合液体的光子晶体光纤温度传感研究

    Institute of Scientific and Technical Information of China (English)

    王若琪; 张怀武; 姚建铨; 周睿; 汪静丽; 李敬辉; 温午麒; 陆颖; 钟凯; 文岐业

    2011-01-01

    To obtain the photonic crystal fiber (PCF) temperature sensor with high sensitivity, the thermal liquid mixture such as chloroform and alcohol is filled in air hole of photonic crystal fiber. The finite element method is used to analyze the influence of temperature on fiber mode area and loss. The temper ature sensibivity of the loss becomes maximal by adjusting the mixing ratio, and in this way we obtain high-sensitivity PCF temperature sensor. The length of fil)ing is 4, mm and experimental results show that the sensitivity of PCF temperature sensor is 0.75 dB/℃, which accords with theoretical simuiation. The sensor is easy for demodulation, with high sensitivity and adjustable sensing interval, which has important applications in active sensing and distributed measuring.%为获得高灵敏度光子晶体光纤温度传感,在实心光子晶体光纤(PCF)空气孔中填充氯仿和酒精等高折射率热敏液体的混合物。理论上采用有限元法分析了温度对光纤模场面积和限制损耗的影响。通过调节液体的混合比,使损耗对温度的灵敏度达到最大值,实现了高灵敏度PCF温度传感。实验表明,填充液体的长为4mm的PCF温度传感器,灵敏度经检测为0.75dB/℃。实验结果和理论仿真相符合。该种传感器易于解调,灵敏度高,温度敏感区间可调节,在进行有源传感和分布式测量时有重要应用。

  7. 1-MW peak power, 574-kHz repetition rate picosecond pulses at 515 nm from a frequency-doubled fiber amplifier

    Science.gov (United States)

    Zou, Feng; Wang, Ziwei; Wang, Zhaokun; Bai, Yang; Li, Qiurui; Zhou, Jun

    2016-11-01

    1-MW peak power picosecond, 574-kHz repetition rate green laser at 515-nm is generated from a frequency-doubled fiber amplifier. 12-ps pulses with 13.9-μJ energy at 515 nm are achieved with a noncritically phase-matched lithium triborate (LBO) crystal through second harmonic generation of a 1030 nm infrared source. The infrared source employs ultra-large-mode-area rod-type photonic crystal fiber (Rod-PCF) for direct picosecond amplification and delivers 20-W 11.6-ps 2.97-MW pulse train with near-diffraction-limited beam quality (M2 = 1.01).

  8. Kagome Hollow-Core Photonic Crystal Fiber Resonator for Rotation Sensing

    CERN Document Server

    Fsaifes, Ihsan; Debord, Benoît; Gérôme, Frédéric; Baz, Assaad; Humbert, Georges; Benabid, Fetah; Schwartz, Sylvain; Bretenaker, Fabien

    2016-01-01

    We investigate the performances of a Kagome Hollow-Core Photonic Crystal Fiber resonator for rotation sensing applications. The use of a large mode field diameter Kagome fiber permits to reduce the free space fiber-to-fiber coupling losses, allowing the realization of cavities with finesses compatible with the angular random walk required for medium to high performance rotation sensing, while minimizing the Kerr effect induced non reciprocities. Experiments show encouraging results that could lead to a compact, low cost, and robust medium for high performance gyroscope.

  9. Band gap of two-dimensional fiber-air photonic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Shu, E-mail: yangshu5678@163.com; Li, Masha

    2016-04-15

    A two-dimensional photonic crystal (PC) composed of textile fiber and air is initially discussed in this paper. Textile materials are so called soft materials, which are different from the previous PCs composed of rigid materials. The plain wave expansion method is used to calculate band structure of different PCs by altering component properties or structural parameters. Results show that the dielectric constant of textile fibers, fiber filling ratio and lattice arrangement are effective factors which influence PCs' band gap. Yet lattice constant and fiber diameter make inconspicuous influence on the band gap feature.

  10. Crystallization kinetics and thermal resistance of bamboo fiber reinforced biodegradable polymer composites

    Science.gov (United States)

    Thumsorn, S.; Srisawat, N.; On, J. Wong; Pivsa-Art, S.; Hamada, H.

    2014-05-01

    Bamboo fiber reinforced biodegradable polymer composites were prepared in this study. Biodegradable poly(butylene succinate) (PBS) was blended with bamboo fiber in a twin screw extruder with varied bamboo content from 20-0wt%. PBS/bamboo fiber composites were fabricated by compression molding process. The effect of bamboo fiber contents on properties of the composites was investigated. Non-isothermal crystallization kinetic study of the composites was investigated based on Avrami equation. The kinetic parameters indicated that bamboo fiber acted as heterogeneous nucleation and enhanced crystallinity of the composites. Bamboo fiber was well dispersed on PBS matrix and good adhered with the matrix. Tensile strength of the composites slightly deceased with adding bamboo fiber. However, tensile modulus and impact strength of the composites increased when increasing bamboo fiber contents. It can be noted that bamboo fiber promoted crystallization and crystallinity of PBS in the composites. Therefore, the composites were better in impact load transferring than neat PBS, which exhibited improving on impact performance of the composites.

  11. [Study on phase-matching of four-wave mixing spectrum in photonic crystal fiber].

    Science.gov (United States)

    Liu, Xiao-xu; Wang, Shu-tao; Zhao, Xing-tao; Chen, Shuang; Zhou, Gui-yao; Wu, Xi-jun; Li, Shu-guang; Hou, Lan-Tian

    2014-06-01

    In the present paper, the four-wave mixing principle of fiber was analyzed, and the high-gain phase-matching conditions were shown. The nonlinear coefficient and dispersion characteristics of photonic crystal fibers were calculated by multipole method. The phase mismatch characteristics of fibers with multiple zero-dispersion wavelengths were analyzed for the first time. The changing rules of phase matching wavelength with the pump wavelength and the pump power were obtained, and the phase matching curves were shown. The characteristics of phase matching wavelengths for different dispersion curves were analyzed. There are four new excitation wavelengths of four-wave mixing spectrum in two zero-dispersion wavelength photonic crystal fiers. Four-wave mixing spectroscopy of photonic crystal fibers with two zero-dispersion wavelengths was obtained in the experi-ent, which is consistent with the theoretical analysis, and verified the reliability of the phase matching theory. The fiber with multiple zero-dispersion wavelengths can create a ricbhphase-matching topology, excite more four-wave mixing wavelengths, ena-ling enhanced control over the spectral locations of the four-wave mixing and resonant-radiation bands emitted by solitons and short pulses. These provide theoretical guidance for photonic crystal fiber wavelength conversion and supercontinoum generation based on four-wave mixing.

  12. Harnessing rogue wave for supercontinuum generation in cascaded photonic crystal fiber.

    Science.gov (United States)

    Zhao, Saili; Yang, Hua; Zhao, Chujun; Xiao, Yuzhe

    2017-04-03

    Based on induced modulation instability, we present a numerical study on harnessing rogue wave for supercontinuum generation in cascaded photonic crystal fibers. By selecting optimum modulation frequency, we achieve supercontinuum with a great improvement on spectrum stability when long-pulse is used as the pump. In this case, rogue wave can be obtained in the first segmented photonic crystal fiber with one zero dispersion wavelength in a controllable manner. Numerical simulations show that spectral range and flatness can be regulated in an extensive range by cascading a photonic crystal fiber with two zero dispersion wavelengths. Some novel phenomena are observed in the second segmented photonic crystal fiber. When the second zero dispersion wavelength is close to the first one, rogue wave is directly translated into dispersion waves, which is conducive to the generation of smoother supercontinuum. When the second zero dispersion wavelength is far away from the first one, rogue wave is translated into the form of fundamental soliton steadily propagating in the vicinity of the second zero dispersion wavelength. Meanwhile, the corresponding red-shifted dispersion wave is generated when the phase matching condition is met, which is beneficial to the generation of wider supercontinuum. The results presented in this work provide a better application of optical rogue wave to generate flat and broadband supercontinuum in cascaded photonic crystal fibers.

  13. Endlessly single-mode photonic crystal fiber as a high resolution probe.

    Science.gov (United States)

    Valtna-Lukner, Heli; Repän, Jaagup; Valdma, Sandhra-Mirella; Piksarv, Peeter

    2016-11-20

    We sample ultra-broadband light, focused onto a diffraction-limited spot, to an endlessly single-mode photonic crystal fiber (ESM) and detect both the field amplitude and phase using a SEA TADPOLE interferometer. We resolve spatial features up to 2.5 times finer than the fiber mode size while sampling the periodic features of the bipolar oscillating field in the transverse section. The resolution enhancement is expected also in other types of single-mode fibers in intensity measurements and leads to an inexpensive method for characterizing the point-spread function of such optical fields, e.g., diffraction-limited spots from microscope objectives. In addition, we demonstrate the guidance of a high-NA light field in the fine structure of an ESM fiber mode. The results are especially valuable for devices where a fiber tip acts as an input slit and defines the spatial resolution, e.g., fiber-based interferometers, spectrometers, and sensors.

  14. Integrated optic current transducers incorporating photonic crystal fiber for reduced temperature dependence.

    Science.gov (United States)

    Chu, Woo-Sung; Kim, Sung-Moon; Oh, Min-Cheol

    2015-08-24

    Optical current transducers (OCT) are indispensable for accurate monitoring of large electrical currents in an environment suffering from severe electromagnetic interference. Temperature dependence of OCTs caused by its components, such as wave plates and optical fibers, should be reduced to allow temperature-independent operation. A photonic crystal fiber with a structural optical birefringence was incorporated instead of a PM fiber, and a spun PM fiber was introduced to overcome the temperature-dependent linear birefringence of sensing fiber coil. Moreover, an integrated optic device that provides higher stability than fiber-optics was employed to control the polarization and detect the phase of the sensed optical signal. The proposed OCT exhibited much lower temperature dependence than that from a previous study. The OCT satisfied the 0.5 accuracy class (IIEC 60044-8) and had a temperature dependence less than ± 1% for a temperature range of 25 to 78 °C.

  15. Inner cladding influence on large mode area photonic crystal fiber properties under severe heat load

    Science.gov (United States)

    Coscelli, Enrico; Poli, Federica; Dauliat, Romain; Darwich, Dia; Cucinotta, Annamaria; Selleri, Stefano; Schuster, Kay; Benoît, Aurélien; Jamier, Raphael; Roy, Philippe

    2016-03-01

    Constant innovations of fiber technology over the last twenty years has fueled a huge improvement of the performances of fiber lasers. Further power scaling of fiber lasers is currently hindered by the phenomenon of transverse mode instabilities, a sudden deterioration of output beam quality occurring beyond a certain power threshold due to energy transfer from the fiber fundamental mode to high-order modes. Several studies have pinpointed a thermal origin for this phenomenon. A possible solution is to implement fiber designs capable of providing a robust single-mode operation even under severe heat load, in order to prevent such coupling. In this paper the effects on the propagating modes of the change of the inner cladding size and microstructuration in double-cladding photonic crystal fibers under heating condition are discussed, and related to field confinement and single-mode regime.

  16. Compact Design of an Electrically Tunable and Rotatable Polarizer Based on a Liquid Crystal Photonic Bandgap Fiber

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2009-01-01

    In this letter, a compact electrically controlled broadband liquid crystal (LC) photonic bandgap fiber polarizer is designed and fabricated. A good fiber coupling quality between two single-mode fibers and one 10-mm-long LC-filled photonic crystal fiber is obtained and protected by using SU-8 fiber...... fixing structures during the device assembly. The total insertion loss of this all-in-fiber device is 2.7 dB. An electrically tunable polarization extinction ratio of 21.3 dB is achieved with 45$^{circ}$ rotatable transmission axis as well as switched on and off in the wavelength range of 1300–1600 nm....

  17. Optical devices based on liquid crystal photonic bandgap fibers

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard

    2005-01-01

    of LCs combined with the unique waveguiding features of PBG fibers gives the LC filled PCFs unique tunable properties. PBG guidance has been demonstrated for different mesophases of LCs and various functional compact fibers has been demonstrated, which utilitzes the high thermo-optical and electro-optical...... effects of LCs. Thermally controlled spectral filters and broadband switching functionalities, electrically controlled switches, polarizers and polarization rotators and an all-optical modulator has been demonstrated. The waveguiding mechanism of anistotropic PBGs fibers has been analyzed and spectral...

  18. Research on the stability of nearly zero flattened dispersion of photonic crystal fibers

    Institute of Scientific and Technical Information of China (English)

    HU Jie; WANG Jian

    2008-01-01

    To analyze the stability of nearly zero flattened dispersion,the dispersion deviations for three kinds of PCFs arc calculated when the hole diamcters deviate from their designed values.Numerical resuIts show that around the wavelength of 1.55μm,the dispersion deviations of both the PCF with three-fold symmetry core and the PCF with hexagonal lattice are much less than that of the PCF with different hole diameters in different rings.Therefore.the stabilities of nearly zero flattened dispersion of the first two kinds of PCFs are much better than that of the last one.Considering the confinement loss.the PCF with three-fold symmetry core is preferabk to practical USe.

  19. Design of a low-bending-loss large-mode-area photonic crystal fiber

    Science.gov (United States)

    Napierala, Marek; Beres-Pawlik, Elzbieta; Nasilowski, Tomasz; Mergo, Pawel; Berghmans, Francis; Thienpont, Hugo

    2012-04-01

    We present a design of a photonic crystal fiber for high power laser and amplifier applications. Our fiber comprises a core with a diameter larger than 60 μm and exhibits single mode operation when the fiber is bent around a 10 cm radius at a wavelength of 1064 nm. Single mode guidance is enforced by the high loss of higher order modes which exceeds 80 dB/m whereas the loss of the fundamental mode (FM) is lower than 0.03 dB/m. The fiber can therefore be considered as an active medium for compact high power fiber lasers and amplifiers with a nearly diffraction limited beam output. We also analyze our fiber in terms of tolerance to manufacturing imperfections. To do so we employ a statistical design methodology. This analysis reveals those crucial parameters of the fiber that have to be controlled precisely during the fabrication process not to deteriorate the fiber performance. Finally we show that the fiber can be fabricated according to our design and we present experimental results that confirm the expected fiber performance.

  20. 1.55-μm supercontinuum based on dispersion-flattened photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A dispersion-flattened photonic crystal fiber with normal dispersion is designed for generating flat wideband supercontinuum, and the supercontinuum generation in this fiber is numerically analyzed. The results show that by appropriately designing the photonic crystal fiber, it can achieve flattened dispersion in the normal dispersion region. It is found that a fiber characterized by a flattened dispersion with a small normal dispersion is suitable for a flat wideband supercontinuum generation. In the process of spectral broadening, self-phase modulation effect plays a dominant role. By filtering the supercontinuum, pulses with different central wavelength over a wide spectral range can be obtained. The pulse width is determined by the bandwidth of the filter.

  1. Efficient generation of linearly polarized Cerenkov radiation in a photonic crystal fiber with suspended rectangle core

    Science.gov (United States)

    Luo, Xing; Cheng, Lan; Peng, Jinggang; Yang, Luyun; Dai, Nengli; Li, Haiqing; Li, Jinyan

    2017-10-01

    We report high efficiency linearly polarized Cerenkov radiation (CR) generation in a photonic crystal fiber with suspended rectangle core. The frequency up-conversion via the Cerenkov radiation upon pumping of Yb-doped femtosecond fiber laser is discussed in details. Experiment results show that the output spectrum contains, besides the infrared supercontinuum, intense green Cerenkov radiation around 536 nm, which carry about 43% of the pump energy at best. The influence of the high birefringence and dispersion character on the Cerenkov radiation generation is discussed. Experiment and simulation results indicate that the rectangle core photonic crystal fiber acts like single-mode single-polarization fiber at the pump wavelength. Only the pulse component along with the slow axis could be confined in the rectangle core well and release Cerenkov radiation efficiently. The Output green Cerenkov radiation is also demonstrated to be linearly polarized. Experiments results agree well with the theoretical predictions.

  2. Tuning quadratic nonlinear photonic crystal fibers for zero group-velocity mismatch

    DEFF Research Database (Denmark)

    Bache, Morten; Lægsgaard, Jesper; Bang, Ole

    2006-01-01

    A nonlinear index-guiding silica PCF is optimized for efficient second-harmonic generation through dispersion calculations. Zero group-velocity mismatch is possible for any pump wavelength above 780 nm. Very high conversion efficiencies and bandwidths are found.......A nonlinear index-guiding silica PCF is optimized for efficient second-harmonic generation through dispersion calculations. Zero group-velocity mismatch is possible for any pump wavelength above 780 nm. Very high conversion efficiencies and bandwidths are found....

  3. Midinfrared optical rogue waves in soft glass photonic crystal fiber

    DEFF Research Database (Denmark)

    Buccoliero, Daniel; Steffensen, Henrik; Ebendorff-Heidepriem, Heike

    2011-01-01

    We investigate numerically the formation of extreme events or rogue waves in soft glass tellurite fibers and demonstrate that optical loss drastically diminishes shot-to-shot fluctuations characteristic of picosecond pumped supercontinuum (SC). When loss is neglected these fluctuations include...... distributions. Our results thus implicitly show that rogue waves will not occur in any SC spectrum that is limited by loss, such as commercial silica fiber based SC sources. © 2011 Optical Society of America....

  4. New Trends in Amplifiers and Sources via Chalcogenide Photonic Crystal Fibers

    Directory of Open Access Journals (Sweden)

    L. Mescia

    2012-01-01

    Full Text Available Rare-earth-doped chalcogenide glass fiber lasers and amplifiers have great applicative potential in many fields since they are key elements in the near and medium-infrared (mid-IR wavelength range. In this paper, a review, even if not exhaustive, on amplification and lasing obtained by employing rare-earth-doped chalcogenide photonic crystal fibers is reported. Materials, devices, and feasible applications in the mid-IR are briefly mentioned.

  5. Efficient optimization of hollow-core photonic crystal fiber design using the finite-element method

    DEFF Research Database (Denmark)

    Holzlöhner, Ronald; Burger, Sven; Roberts, John;

    2006-01-01

    We employ a finite-element (FE) solver with adaptive grid refinement to model hollow-core photonic crystal fibers (HC-PCFs) whose core is formed from 19 omitted cladding unit cells. We optimize the complete fiber geometry for minimal field intensity at material/air interfaces, which indicates low...... loss and high damage threshold, using multidimensional optimization. The optimal design shows a 99.8 % power fraction within the air and an overlap with a Gaussian mode of 96.9 %....

  6. Recent advancements in transparent ceramics and crystal fibers for high power lasers

    Science.gov (United States)

    Kim, W.; Baker, C.; Villalobos, G.; Florea, C.; Gibson, D.; Shaw, L. B.; Bowman, S.; Bayya, S.; Sadowski, B.; Hunt, M.; Askins, C.; Peele, J.; Aggarwal, I. D.; Sanghera, J. S.

    2013-05-01

    In this paper, we present our recent progress in the development of rare-earth (Yb3+ or Ho3+) doped Lu2O3 and Y2O3 sesquioxides for high power solid state lasers. We have fabricated high quality transparent ceramics using nano-powders synthesized by a co-precipitation method. This was accomplished by developments in high purity powder synthesis and low temperature scalable sintering technology developed at NRL. The optical, spectral and morphological properties as well as the lasing performance from our highly transparent ceramics are presented. In the second part of the paper, we discuss our recent research effort in developing cladded-single crystal fibers for high power single frequency fiber lasers has the potential to significantly exceed the capabilities of existing silica fiber based lasers. Single crystal fiber cores with diameters as small as 35μm have been drawn using high purity rare earth doped ceramic or single crystal feed rods by the Laser Heated Pedestal Growth (LHPG) process. Our recent results on the development of suitable claddings on the crystal fiber core are discussed.

  7. Compact optically-fed microwave true-time delay using liquid crystal photonic bandgap fiber device

    DEFF Research Database (Denmark)

    Wei, Lei; Xue, Weiqi; Chen, Yaohui

    2009-01-01

    Electrically tunable liquid crystal photonic bandgap fiber device based optically-fed microwave true-time delay is demonstrated. A maximum ~60° phase shift and an averaged ~7.2ps true time delay are obtained over the modulation frequency range 1GHz-19GHz.......Electrically tunable liquid crystal photonic bandgap fiber device based optically-fed microwave true-time delay is demonstrated. A maximum ~60° phase shift and an averaged ~7.2ps true time delay are obtained over the modulation frequency range 1GHz-19GHz....

  8. Cross-phase-modulation-induced instability in photonic-crystal fibers.

    Science.gov (United States)

    Serebryannikov, E E; Konorov, S O; Ivanov, A A; Alfimov, M V; Scalora, M; Zheltikov, A M

    2005-08-01

    Cross-phase-modulation-induced instability is identified as a significant mechanism for efficient parametric four-wave-mixing frequency conversion in photonic-crystal fibers. Fundamental-wavelength femtosecond pulses of a Cr, forsterite laser are used in our experiments to transform the spectrum of copropagating second-harmonic pulses of the same laser in a photonic-crystal fiber. Efficient generation of sidebands shifted by more than 80 THz with respect to the central frequency of the second harmonic is observed in the output spectrum of the probe field.

  9. Tailoring the parametric gain in large mode area hybrid photonic crystal fibers

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2013-01-01

    The spectral width of parametric gain peaks due to degenerate four-wave mixing is investigated numerically in large-mode-area hybrid photonic crystal fibers. The width is varied for a maintained pump wavelength and gain maximum position by tailoring the dispersion.......The spectral width of parametric gain peaks due to degenerate four-wave mixing is investigated numerically in large-mode-area hybrid photonic crystal fibers. The width is varied for a maintained pump wavelength and gain maximum position by tailoring the dispersion....

  10. Tailoring the parametric gain in large mode areahybrid photonic crystal fibers

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2013-01-01

    The spectral width of parametric gain peaks due to degenerate four-wave mixing is investigated numerically in large-mode-area hybrid photonic crystal fibers. The width is varied for a maintained pump wavelength and gain maximum position by tailoring the dispersion.......The spectral width of parametric gain peaks due to degenerate four-wave mixing is investigated numerically in large-mode-area hybrid photonic crystal fibers. The width is varied for a maintained pump wavelength and gain maximum position by tailoring the dispersion....

  11. Compact optically-fed microwave true-time delay using liquid crystal photonic bandgap fiber device

    DEFF Research Database (Denmark)

    Wei, Lei; Xue, Weiqi; Chen, Yaohui;

    2009-01-01

    Electrically tunable liquid crystal photonic bandgap fiber device based optically-fed microwave true-time delay is demonstrated. A maximum ~60° phase shift and an averaged ~7.2ps true time delay are obtained over the modulation frequency range 1GHz-19GHz.......Electrically tunable liquid crystal photonic bandgap fiber device based optically-fed microwave true-time delay is demonstrated. A maximum ~60° phase shift and an averaged ~7.2ps true time delay are obtained over the modulation frequency range 1GHz-19GHz....

  12. Compact Electrically tunable Waveplate Based on Liquid Crystal Photonic Bandgap Fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Keller, Stephan Urs

    2009-01-01

    A compact tunable waveplate based on negative dielectric liquid crystal photonic bandgap fibers is presented. The birefringence can be tuned electrically to work as a quarter-wave or a half-wave plate in the wavelength range 1520nm-1600nm.......A compact tunable waveplate based on negative dielectric liquid crystal photonic bandgap fibers is presented. The birefringence can be tuned electrically to work as a quarter-wave or a half-wave plate in the wavelength range 1520nm-1600nm....

  13. Highly tunable large core single-mode liquid crystal photonic bandgap fiber

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Lægsgaard, Jesper; Bjarklev, Anders Overgaard;

    2006-01-01

    We demonstrate a highly tunable photonic bandgap fiber, which has a large-core diameter of 25 mu m and an effective mode area of 440 mu m(2). The tunability is achieved by infiltrating the air holes of a photonic crystal fiber with an optimized liquid-crystal mixture having a large temperature...... gradient of the refractive indices at room temperature. A bandgap tuning sensitivity of 27 nm/degrees C is achieved at room temperature. The insertion loss is estimated to be less than 0.5 dB and caused mainly by coupling loss between the index-guided mode and the bandgap-guided mode. (c) 2006 Optical...

  14. Polarization Properties of Elliptical-Hole Liquid Crystal Photonic Bandgap Fibers

    DEFF Research Database (Denmark)

    Tartarini, Giovanni; Pansera, Marco; Alkeskjold, Thomas Tanggaard;

    2007-01-01

    ellipticity allow some phenomena that are not predicted yet, such as polarization-dependent losses and birefringence sign change in the wavelength range used for standard telecom fibers. Control of these features allows the design of new devices for sensing or telecommunication applications......The characteristics of triangular photonic crystal fibers (PCFs) with elliptical holes filled with a nematic liquid crystal (LC) are investigated theoretically. The analysis that is carried out using the finite-element method, including material dispersion effects, shows that LC anisotropy and hole...

  15. Ultraviolet Light Generation in Gas-Filled Kagome Photonic Crystal Fiber

    Science.gov (United States)

    Rodrigues, Sílvia M. G.; Facão, Margarida; Ferreira, Mário F. S.

    2015-03-01

    Kagome hollow-core photonic crystal fibers were found to be ideal for the occurrence of ultrafast non-linear optics. This article reports the optimal conditions for the generation of ultraviolet light using a gas filled kagome hollow-core-photonic crystal fiber. It is shown that by changing the pressure of the gas and the input pulse characteristics, the efficiency of conversion and quality of ultraviolet light can be improved, as well as tuning its central frequency. Results suggest that a highly coherent and tunable ultraviolet light source can be constructed, which can find numerous applications.

  16. Analysis of a broadband dispersion compensating photonic crystal fiber raman amplifier

    DEFF Research Database (Denmark)

    Varshney, Shailendra K.; Saitoh, K.; Koshiba, M.;

    2006-01-01

    Using an accurate full-vectorial finite element method, a realistic model of a fabricated dispersion compensating photonic crystal fiber is analyzed. An almost flat Raman-gain spectrum (gain-ripples at just ±0.48-dB) is obtained using a single pump.......Using an accurate full-vectorial finite element method, a realistic model of a fabricated dispersion compensating photonic crystal fiber is analyzed. An almost flat Raman-gain spectrum (gain-ripples at just ±0.48-dB) is obtained using a single pump....

  17. 光子晶体光纤中布里渊散射声波模式特性的分析%Study on characteristics of acoustic modes via stimulated Brillouin scattering in photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    侯尚林; 薛乐梅; 黎锁平; 刘延君; 徐永钊

    2012-01-01

    推导了光子晶体光纤中声波微小位移波动方程;研究了泵浦波长以及纤芯折射率对声波模式的影响;应用石英圆柱模型研究了小芯径光子晶体光纤中纤芯直径对布里渊声波模式色散的影响.结果表明在光子晶体光纤中,纵向声波和横向声波共同作用产生质点声场,两者相互耦合将产生混合声波模式;可以通过改变泵浦波长或光子晶体光纤纤芯折射率来改变参与布里渊散射(BS)过程的声波模式的传播常数;随着光子晶体光纤(PCF)纤芯直径的增大,声波模式耦合程度得到加强,相速度呈减小趋势,且同一传播常数下,声波模式数呈增多趋势;随着泵浦波频率的增大,声波相速度减小.%The effects of optical fiber parameters, pump wavelength and the fiber core refractive index in small-core photonic crystal fibers on characteristics of acoustic modes and the dependency of the acoustic modes coupling are investigated by the effective index method. The results indicate that both the mixed longitudinal acoustic mode and transverse acoustic mode jointly produce the acoustic fields, and their coupling forms the mixed acoustic mode; the propagation constant of acoustic mode can be changed by tailoring the pump wavelength or the PCF core refractive index in the process of SBS; the acoustic mode coupling increase and the phase velocity of the acoustic mode decreases with the increase of the PCF core diameter, and there is also a growing trend of the number of the acoustic modes at the same propagation constant. The velocity decreases with the increase of the frequency of the pump wave.

  18. Changes of propagation characteristics with core parameters in kagome-structured hollow-core photonic crystal fibers%Kagome结构空芯光子晶体光纤纤芯参数对传输特性的影响

    Institute of Scientific and Technical Information of China (English)

    蒋文晓; 谭晓玲; 周骏

    2011-01-01

    应用全矢量有限元方法,研究大间距Kagome结构空芯光子晶体光纤中纤芯的大小、形状与壁厚对光纤传输损耗谱的影响.结果表明,某些纤芯尺寸会造成包层中的结构缺陷,易使纤芯基模、表面模及包层模之间发生能量耦合,产生较大损耗.而纤芯形状与壁厚的改变会引起表面模式的变化,从而影响发生在基模与表面模之间反向耦合的位置和强度,使光纤传输频带变窄和损耗变大.据此,提出Kagome结构光纤的纤芯设计思路,即纤芯的大小应使包层保持完整的微结构,纤芯形状应与包层中的单元微结构相楔合,纤芯壁厚应与包层中玻璃支柱的宽度相同.%Based on all-vector finite element method, general features of the loss spectrum of large-pitch kagome lattice hollow-core photonic crystal fiber(HC-PCF) are exhibited by investigating the effects of the core size, core shape and core-cladding boundary width on the guidance properties of the fiber. The numerical simulations show that the operational bandwidth of the fiber is drastically affected by improper core design parameters which cause the interaction among the fundamental core modes, surface modes and cladding modes. Therefore, the design of large-pitch kagome lattice HC-PCF with low loss and broad bandwidth should satisfy these conditions: the core size maintains the complete micro-structures of the cladding, the core shape matches the micro-structure of the cladding cells, and the core-cladding boundary width is equal to the glass struts width of the cladding.

  19. Guiding and amplification properties of rod-type photonic crystal fibers with sectioned core doping

    DEFF Research Database (Denmark)

    Selleri, Stefano; Poli, Federica; Passaro, Davide

    2009-01-01

    been applied to properly design the low refractive index ring in the fiber core, which can provide an increase of the differential overlap between the fundamental and the higher-order mode. Then, the gain competition among the guided modes along the Yb-doped rod-type fibers has been investigated...... with a spatial and spectral amplifier model. Simulation results have shown the effectiveness of the sectioned core doping in worsening the higher-order mode overlap on the doped area, thus providing an effective single-mode behavior of the Yb-doped rod-type photonic crystal fibers....

  20. Hybrid Ytterbium-doped large-mode-area photonic crystal fiber amplifier for long wavelengths

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Alkeskjold, Thomas T.; Poli, Federica

    2012-01-01

    A large-mode-area Ytterbium-doped photonic crystal fiber amplifier with build-in gain shaping is presented. The fiber cladding consists of a hexagonal lattice of air holes, where three rows are replaced with circular high-index inclusions. Seven missing air holes define the large-mode-area core....... Light confinement is achieved by combined index and bandgap guiding, which allows for single-mode operation and gain shaping through distributed spectral filtering of amplified spontaneous emission. The fiber properties are ideal for amplification in the long wavelength regime of the Ytterbium gain...

  1. Intermodal four-wave mixing from femtosecond pulse-pumped photonic crystal fiber.

    Science.gov (United States)

    Tu, H; Jiang, Z; Marks, D L; Boppart, S A

    2009-03-09

    Large Stokes-shift ( approximately 4700 cm(-1)) four-wave mixing is generated in a deeply normal dispersion regime from a 20 cm commercial large-mode-area photonic crystal fiber pumped by amplified approximately 800 nm femtosecond pulses. The phase-matching condition is realized through an intermodal scheme involving two pump photons in the fundamental fiber mode and a pair of Stokesanti-Stokes photons in a higher-order fiber mode. Over 7% conversion efficiency from the pump input to 586 nm anti-Stokes signal has been attained.

  2. Large-pitch kagome-structured hollow-core photonic crystal fiber

    Science.gov (United States)

    Couny, F.; Benabid, F.; Light, P. S.

    2006-12-01

    We report the fabrication and characterization of a new type of hollow-core photonic crystal fiber based on large-pitch (˜12μm) kagome lattice cladding. The optical characteristics of the 19-cell, 7-cell, and single-cell core defect fibers include broad optical transmission bands covering the visible and near-IR parts of the spectrum with relatively low loss and low chromatic dispersion, no detectable surface modes and high confinement of light in the core. Various applications of such a novel fiber are also discussed, including gas sensing, quantum optics, and high harmonic generation.

  3. Laser-cooled atoms inside a hollow-core photonic-crystal fiber

    DEFF Research Database (Denmark)

    Bajcsy, Michal; Hofferberth, S.; Peyronel, Thibault

    2011-01-01

    We describe the loading of laser-cooled rubidium atoms into a single-mode hollow-core photonic-crystal fiber. Inside the fiber, the atoms are confined by a far-detuned optical trap and probed by a weak resonant beam. We describe different loading methods and compare their trade-offs in terms...... of implementation complexity and atom-loading efficiency. The most efficient procedure results in loading of ∼30,000 rubidium atoms, which creates a medium with an optical depth of ∼180 inside the fiber. Compared to our earlier study this represents a sixfold increase in the maximum achieved optical depth...

  4. Single-mode hollow-core photonic crystal fiber made from soft glass

    Science.gov (United States)

    Jiang, X.; Euser, T. G.; Abdolvand, A.; Babic, F.; Tani, F.; Joly, N. Y.; Travers, J. C.; St. J. Russell, P.

    2011-08-01

    We demonstrate the first soft-glass hollow core photonic crystal fiber. The fiber is made from a high-index lead-silicate glass (Schott SF6, refractive index 1.82 at 500 nm). Fabricated by the stack-and-draw technique, the fiber incorporates a 7-cell hollow core embedded in a highly uniform 6-layer cladding structure that resembles a kagomé-like lattice. Effective single mode guidance of light is observed from 750 to 1050 nm in a large mode area (core diameter ~30 μm) with a low loss of 0.74 dB/m. The underlying guidance mechanism of the fiber is investigated using finite element modeling. The fiber is promising for applications requiring single mode guidance in a large mode area, such as particle guidance, fluid and gas filled devices.

  5. Polymeric THz 2D Photonic Crystal Filters Fabricated by Fiber Drawing

    DEFF Research Database (Denmark)

    Stecher, Matthias; Jansen, Christian; Ahmadi-Boroujeni, Mehdi

    2012-01-01

    In this paper, we report on a new form of polymeric 2D photonic crystal filters for THz frequencies fabricated using a standard fiber drawing technique. The band stop filters were modeled and designed using the generalized multipole technique. The frequency and angle-dependent transmission...

  6. Modal dynamics in hollow-core photonic-crystal fibers with elliptical veins.

    Science.gov (United States)

    Hochman, Amit; Leviatan, Yehuda

    2005-08-08

    Modal characteristics of hollow-core photonic-crystal fibers with elliptical veins are studied by use of a recently proposed numerical method. The dynamic behavior of bandgap guided modes, as the wavelength and aspect ratio are varied, is shown to include zero-crossings of the birefringence, polarization dependent radiation losses, and deformation of the fundamental mode.

  7. A selectively coated photonic crystal fiber based surface plasmon resonance sensor

    DEFF Research Database (Denmark)

    Yu, X; Zhang, Y.; Pan, S.S.

    2010-01-01

    We propose a novel design for a photonic crystal fiber based surface plasmonic resonance sensor. The sensor consists of selectively metal-coated air holes containing analyte channels, which enhance the phase matching between the plasmonic mode and the core-guided mode. Good refractive index sensi...

  8. Large-mode-area hybrid photonic crystal fiber amplifier at 1178 nm

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Chen, Mingchen; Shirakawa, Akira

    2015-01-01

    Amplification of 1178 nm light is demonstrated in a large-mode-area single-mode ytterbium-doped hybrid photonic crystal fiber, relying on distributed spectral filtering of spontaneous emission at shorter wavelengths. An output power of 53 W is achieved with 29 dB suppression of parasitic lasing...

  9. On-chip tunable long-period grating devices based on liquid crystal photonic bandgap fibers

    DEFF Research Database (Denmark)

    Wei, Lei; Weirich, Johannes; Alkeskjold, Thomas Tanggaard;

    2009-01-01

    We design and fabricate an on-chip tunable long-period grating device by integrating a liquid crystal photonic bandgap fiber on silicon structures. The transmission axis of the device can be electrically rotated in steps of 45° as well as switched on and off with the response time in the millisec...

  10. Experimental investigation of hollow-core photonic crystal fibers with five photonic band-gaps

    Institute of Scientific and Technical Information of China (English)

    YUAN Jin-hui; HOU Lan-tian; WEI Dong-bin; WANG Hai-yun; ZHOU Gui-yao

    2008-01-01

    The hollow-core photonic crystal fibers (HC-PCFs) with integrity structure have been fabricated with an improved twice stack-and-draw technique. The transmission spectrum shows that five photonic band-gaps within 450-1100 nm have been obtained.And the green light transmission in the HC-PCFs'has been observed remarkably.

  11. Picosecond anti-Stokes generation in a photonic-crystal fiber for interferometric CARS microscopy

    DEFF Research Database (Denmark)

    Andresen, Esben Ravn

    2006-01-01

    We generate tunable picosecond anti-Stokes pulses by four-wave mixing of two picosecond pump and Stokes pulse trains in a photonic-crystal fiber. The visible, spectrally narrow anti-Stokes pulses with shifts over 150 nm are generated without generating other spectral features. As a demonstration...

  12. Tailoring the parametric gain in large mode areahybrid photonic crystal fibers

    OpenAIRE

    Petersen, Sidsel Rübner; Lægsgaard, Jesper; Alkeskjold, Thomas Tanggaard

    2013-01-01

    The spectral width of parametric gain peaks due to degenerate four-wave mixing is investigated numerically in large-mode-area hybrid photonic crystal fibers. The width is varied for a maintained pump wavelength and gain maximum position by tailoring the dispersion.

  13. Continuous-wave wavelength conversion in a photonic crystal fiber with two zero-dispersion wavelengths

    DEFF Research Database (Denmark)

    Andersen, T.V.; Hilligsøe, Karen Marie; Nielsen, C.K.;

    2004-01-01

    We demonstrate continuous-wave wavelength conversion through four-wave mixing in an endlessly single mode photonic crystal fiber. Phasematching is possible at vanishing pump power in the anomalous dispersion regime between the two zero-dispersion wavelengths. By mixing appropriate pump and idler...

  14. Linear and nonlinear modeling of light propagation in hollow-core photonic crystal fiber

    DEFF Research Database (Denmark)

    Roberts, John; Lægsgaard, Jesper

    2009-01-01

    Hollow core photonic crystal fibers (HC-PCFs) find applications which include quantum and non-linear optics, gas detection and short high-intensity laser pulse delivery. Central to most applications is an understanding of the linear and nonlinear optical properties. These require careful modeling...

  15. THz waveguides, devices and hybrid polymer-chalcogenide photonic crystal fibers

    DEFF Research Database (Denmark)

    Bao, Hualong; Markos, Christos; Nielsen, Kristian;

    2014-01-01

    In this contribution, we review our recent activities in the design, fabrication and characterization of polymer THz waveguides. Besides the THz waveguides, we finally will also briefly show some of our initial results on a novel hybrid polymer photonic crystal fiber with integrated chalcogenide...

  16. Low Loss and Highly Birefringent Hollow-Core Photonic Crystal Fiber

    DEFF Research Database (Denmark)

    Roberts, P. John; Williams, D.P.; Mangan, Brian J.;

    2006-01-01

    A hollow-core photonic crystal fiber design is proposed which enables both low-loss and polarization-maintained signal propagation. The design relies on an arrangement of antiresonant features positioned on the glass ring that surrounds the air core....

  17. Temperature influence on electrically controlled liquid crystal filled photonic bandgap fiber devices

    DEFF Research Database (Denmark)

    Wei, Lei; Alkeskjold, Thomas Tanggaard; Bjarklev, Anders Overgaard

    2009-01-01

    We experimentally investigate the temperature influence on electrically controlled liquid crystal filled photonic bandgap fiber device. The phase shift in the wavelength range 1520nm-1600nm for realizing quarter and half wave plates at different temperatures by applying a certain voltage...

  18. Low Loss and Highly Birefringent Hollow-Core Photonic Crystal Fiber

    OpenAIRE

    2006-01-01

    A hollow-core photonic crystal fiber design is proposed which enables both low-loss and polarization-maintained signal propagation. The design relies on an arrangement of antiresonant features positioned on the glass ring that surrounds the air core.

  19. Light source design using Kagome-lattice hollow core photonic crystal fibers

    Science.gov (United States)

    Hossain, Md. Anwar; Namihira, Yoshinori

    2014-09-01

    Supercontinuum (SC) light source is designed using high pressure Xe-filled hollow core Kagome-lattice photonic crystal fiber. Using finite element method with perfectly matched layer, SC spectra in normal chromatic dispersion region have been generated using picosecond optical pulses from relatively less expensive laser sources.

  20. Influences of chemical aging on the surface morphology and crystallization behavior of basaltic glass fibers

    DEFF Research Database (Denmark)

    Lund, Majbritt Deichgræber; Yue, Yuanzheng

    2008-01-01

    The impact of aging in high humidity and water on the surface morphology and crystallization behavior of basaltic glass fibers has been studied using scanning electron microscopy, transmission electron microscopy, calorimetry and X-ray diffraction. The results show that interaction between the fi...