WorldWideScience

Sample records for crystal display amlcd

  1. High-resolution AMLCD for the electronic library system

    Science.gov (United States)

    Martin, Russel A.; Middo, Kathy; Turner, William D.; Lewis, Alan; Thompson, Malcolm J.; Silverstein, Louis D.

    1994-06-01

    The Electronic Library System (ELS), is a proposed data resource for the cockpit which can provide the aircrew with a vast array of technical information on their aircraft and flight plan. This information includes, but is not limited to, approach plates, Jeppeson Charts, and aircraft technical manuals. Most of these data are appropriate for digitization at high resolution (300 spi). Xerox Corporation has developed a flat panel active matrix liquid crystal display, AMLCD, that is an excellent match to the ELS, due to its innovative and aggressive design.

  2. Requirements for AMLCDs in U.S. military applications

    Science.gov (United States)

    Hopper, Darrel G.; Desjardins, Daniel D.

    1995-06-01

    Flat panel displays are fast becoming a significant source of more defense for less money. Military instruments have begun to use color active matrix liquid crystal displays (AMLCDs). This is the beginning of a significant transition from electromechanical, CRT. dichroic LCD, and electroluminescent display designs to the AMLCD designs. We have the opportunity with this new technology to establish common products capable of meeting user requirements for sunlight-readable, color and grayscale capable, high-sharpness high-pixel count, flat panel displays for military applications. The Wright Laboratory is leading the development of recommended best practice, draft guidance standard, and performance specifications for this new generation, the flat panel cockpit display generation, of display modules based on requirements for U.S. military aircraft and ground combat human system interfaces. These requirements are similar in many regards to those in both the civil aviation and automotive industries; accordingly, commonality with these civil applications is incorporated where possible, against the requirements for military combat applications. The performance requirement may be achieved by two approaches: militarization of displays made to low requirements of a large volume civil products manufacturer like Sharp or integration of displays made to high requirements by a niche market commercial vendor, like Optical Imaging Systems, Litton Systems Limited, ImageQuest Inc., and Planar Advanced Inc. teamed with Xerox PARC and Standish Industries. [Note that the niche market companies listed are commercial off-the shelf vendors, albeit for high requirement low volume customers.] Given that the performance specifications can be met for a particular military product by either approach, the choice is based on life cycle cost and a thin analysis based on initial costs alone is not acceptable as it ignores the fact that military product life cycles and procurements are 20-60 years

  3. Precise prediction of optical responses of liquid-crystal display products using a behavioral model of liquid crystal

    Science.gov (United States)

    Park, Chansoo; Cho, Youngmin; Kim, Jong-Man; Kim, Jongbin; Lee, Seung-Woo

    2012-01-01

    We propose a precise circuit model to estimate transient optical responses of an active-matrix liquid crystal display (AMLCD). Liquid crystal (LC) molecules in the pixel is behaviorally modeled by using the first-order system that is described by Verilog-A. Capacitance-voltage (C-V) characteristics of a pixel determine the accuracy of the dynamic responses. Measuring C-V characteristics is impossible because pixels are driven by switching transistors in the AMLCD. We propose a method to obtain the C-V data from natural optical responses. Estimated optical responses based on the C-V data extracted by our proposal show more accurate results than those based on C-V data obtained by using transmittance-voltage data. It is demonstrated that our behavioral model enables us to predict very accurate transient responses, which makes it possible to design LCD products with lower costs.

  4. Liquid Crystal Airborne Display

    Science.gov (United States)

    1977-08-01

    81/2X 11- 10 -9 .8 display using a large advertising alphanimeric ( TCI ) has been added to the front of the optical box used in the F-4 aircraft for HUD...properties over a wide range of tempera - tures, including normal room temperature. What are Liquid Crystals? Liquid crystals have been classified in three...natic fanctions and to present data needed for the semi- automatic and manual control of system functions. Existing aircraft using CRT display

  5. Crystal ball single event display

    Energy Technology Data Exchange (ETDEWEB)

    Grosnick, D.; Gibson, A. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy; Allgower, C. [Argonne National Lab., IL (United States). High Energy Physics Div.; Alyea, J. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy]|[Argonne National Lab., IL (United States). High Energy Physics Div.

    1997-10-15

    The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about {pi}{sup o}`s and {eta}`s formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer.

  6. Displaying gray shades in liquid crystal displays

    Indian Academy of Sciences (India)

    T N Ruckmongathan

    2003-08-01

    Quality of image in a display depends on the contrast, colour, resolution and the number of gray shades. A large number of gray shades is necessary to display images without any contour lines. These contours are due to limited number of gray shades in the display causing abrupt changes in grayness of the image, while the original image has a gradual change in brightness. Amplitude modulation has the capability to display a large number of gray shades with minimum number of time intervals [1,2]. This paper will cover the underlying principle of amplitude modulation, some variants and its extension to multi-line addressing. Other techniques for displaying gray shades in passive matrix displays are reviewed for the sake of comparison.

  7. Liquid crystal displays for aircraft engineering

    Directory of Open Access Journals (Sweden)

    Kovalenko L. F.

    2009-06-01

    Full Text Available Operating conditions for liquid-crystal displays of aircraft instruments have been examined. Requirements to engineering of a liquid-crystal display for operation in severe environment have been formulated. The implementation options for liquid-crystal matrix illumination have been analyzed in order to ensure the sufficient brightness depending on external illumination of a display screen.

  8. Emerging Technologies of Liquid Crystal Displays

    Institute of Scientific and Technical Information of China (English)

    Sin-Doo Lee; Chang-Jae Yu; Jae-Hong Park; Min-Sik Jung

    2003-01-01

    The general features and the emerging technologies of liquid crystal displays are described from the viewpoints of wide viewing and fast response technologies. The device applications of liquid crystals for optical communications are also described.

  9. Temperature-compensated 8-bit column driver for AMLCD

    Science.gov (United States)

    Dingwall, Andrew G. F.; Lin, Mark L.

    1995-06-01

    An all-digital, 5 V input, 50 Mhz bandwidth, 10-bit resolution, 128- column, AMLCD column driver IC has been designed and tested. The 10-bit design can enhance display definition over 6-bit nd 8-bit column drivers. Precision is realized with on-chip, switched-capacitor DACs plus transparently auto-offset-calibrated, opamp outputs. Increased resolution permits multiple 10-bit digital gamma remappings in EPROMs over temperature. Driver IC features include externally programmable number of output column, bi-directional digital data shifting, user- defined row/column/pixel/frame inversion, power management, timing control for daisy-chained column drivers, and digital bit inversion. The architecture uses fewer reference power supplies.

  10. Characterising laser beams with liquid crystal displays

    Science.gov (United States)

    Dudley, Angela; Naidoo, Darryl; Forbes, Andrew

    2016-02-01

    We show how one can determine the various properties of light, from the modal content of laser beams to decoding the information stored in optical fields carrying orbital angular momentum, by performing a modal decomposition. Although the modal decomposition of light has been known for a long time, applied mostly to pattern recognition, we illustrate how this technique can be implemented with the use of liquid-crystal displays. We show experimentally how liquid crystal displays can be used to infer the intensity, phase, wavefront, Poynting vector, and orbital angular momentum density of unknown optical fields. This measurement technique makes use of a single spatial light modulator (liquid crystal display), a Fourier transforming lens and detector (CCD or photo-diode). Such a diagnostic tool is extremely relevant to the real-time analysis of solid-state and fibre laser systems as well as mode division multiplexing as an emerging technology in optical communication.

  11. Supramolecular liquid crystal displays : construction and applications

    NARCIS (Netherlands)

    Hoogboom, Joannes Theodorus Valentinus

    2004-01-01

    This thesis describes chemical methodologies, which can be ued to construct alignment layers for liquid crystal display purposes in a non-clean room environment, by making use of supramolecular chemistry. These techniques are subsequently used to attain control over LCD-properties, both pre- and pos

  12. Liquid Crystal Microlenses for Autostereoscopic Displays

    Directory of Open Access Journals (Sweden)

    José Francisco Algorri

    2016-01-01

    Full Text Available Three-dimensional vision has acquired great importance in the audiovisual industry in the past ten years. Despite this, the first generation of autostereoscopic displays failed to generate enough consumer excitement. Some reasons are little 3D content and performance issues. For this reason, an exponential increase in three-dimensional vision research has occurred in the last few years. In this review, a study of the historical impact of the most important technologies has been performed. This study is carried out in terms of research manuscripts per year. The results reveal that research on spatial multiplexing technique is increasing considerably and today is the most studied. For this reason, the state of the art of this technique is presented. The use of microlenses seems to be the most successful method to obtain autostereoscopic vision. When they are fabricated with liquid crystal materials, extended capabilities are produced. Among the numerous techniques for manufacturing liquid crystal microlenses, this review covers the most viable designs for its use in autostereoscopic displays. For this reason, some of the most important topologies and their relation with autostereoscopic displays are presented. Finally, the challenges in some recent applications, such as portable devices, and the future of three-dimensional displays based on liquid crystal microlenses are outlined.

  13. Custom-designed AMLCD modules common to multiple platforms from consumer-oriented fabrication facility

    Science.gov (United States)

    Niemczyk, James

    2002-08-01

    The APC- LG-LCD relationship continues to expand with new products developed specifically for APC applications and also LG-LCD products developed for the consumer market, but adapted using APC enhancements for applications in the rugged world. Our delivery performance has proven that a superior, cost effective product can only be produced by incorporating product enhancements at the point of AMLCD manufacture. Further adaptations for specific applications can be simplified by utilizing the same part number panel for multiple platform uses. The manufacturing environment must be flexible enough to run multiple part numbers on a weekly basis. As such, manufacturing automation implemented at APC continues to strengthen our position as the world leader in custom AMLCD display modules. These automation initiatives are the direct result of APC learning the LG-LCD manufacturing method and applying these principals to our particular processes. The APC - LG-LCD relationship affords availability guarantees for display modules for a period of 10 years, thereby reducing procurement risk and minimizing costs associated with redesign when using consumer driven panels. This guarantee redefines the game rules for procurement of AMLCD's. We also offer a very quick turn for those customers who prefer to perform a lifetime buy of product. Typically, thousands of panels can be delivered within six months of a production go ahead. The APC -LC-LCD team remains successful due to the many years spent working together to develop and manufacture products that this niche market demands. The mutual respect for the technical and manufacturing operations at APC and LG-LCD continues to foster a relationship that time and again deliver superior, cost effective products to the market.

  14. Latest Developments In Liquid Crystal Television Displays

    Science.gov (United States)

    Morozumi, Shinji; Oguchi, Kouichi; Ohshima, Hiroyuki

    1984-06-01

    This paper will discuss developments in liquid crystal (LC) television displays, mainly for pocket-size TV sets. There are two types of LC television displays. One is a simple multiplexing type, and the other is an active matrix type. The former type is an easier way to fabricate large and low-cost LC panels than the latter. However, it has serious drawbacks. The contrast gets lower as the duty ratio gets higher. Therefore the TV image of this type inevitably has rather low contrast and resolution. On the other hand, the active matrix type, which consists of active elements in each pixel, has several advantages in overcoming such problems. The metal oxide semiconductor transistors and the amorphous or polycrystalline Si thin-film transistors (TFTs) have possibilities in this application. A full-color LC display, which can be realized by the combina-tion of color filters and poly Si TFT arrays on a transparent substrate, was proven to have excellent color image, close to that of conventional CRTs. Here, several examples of LC television displays, including color, are shown. Some of them are already on the market, and others will be soon.

  15. Dual redundant display in bubble canopy applications

    Science.gov (United States)

    Mahdi, Ken; Niemczyk, James

    2010-04-01

    Today's cockpit integrator, whether for state of the art military fast jet, or piston powered general aviation, is striving to utilize all available panel space for AMLCD based displays to enhance situational awareness and increase safety. The benefits of a glass cockpit have been well studied and documented. The technology used to create these glass cockpits, however, is driven by commercial AMLCD demand which far outstrips the combined worldwide avionics requirements. In order to satisfy the wide variety of human factors and environmental requirements, large area displays have been developed to maximize the usable display area while also providing necessary redundancy in case of failure. The AMLCD has been optimized for extremely wide viewing angles driven by the flat panel TV market. In some cockpit applications, wide viewing cones are desired. In bubble canopy cockpits, however, narrow viewing cones are desired to reduce canopy reflections. American Panel Corporation has developed AMLCD displays that maximize viewing area, provide redundancy, while also providing a very narrow viewing cone even though commercial AMLCD technology is employed suitable for high performance AMLCD Displays. This paper investigates both the large area display architecture with several available options to solve redundancy as well as beam steering techniques to also limit canopy reflections.

  16. Liquid crystals beyond displays chemistry, physics, and applications

    CERN Document Server

    Li, Quan

    2012-01-01

    The chemistry, physics, and applications of liquid crystals beyond LCDs Liquid Crystals (LCs) combine order and mobility on a molecular and supramolecular level. But while these remarkable states of matter are most commonly associated with visual display technologies, they have important applications for a variety of other fields as well. Liquid Crystals Beyond Displays: Chemistry, Physics, and Applications considers these, bringing together cutting-edge research from some of the most promising areas of LC science. Featuring contributions from respected researchers from around the globe, th

  17. High Performance Negative Dielectric Anisotropy Liquid Crystals for Display Applications

    Directory of Open Access Journals (Sweden)

    Xiaolong Song

    2013-09-01

    Full Text Available We review recent progress in the development of high birefringence (Δn ≥ 0.12 negative dielectric anisotropy (Δε < 0 liquid crystals (LCs for direct-view and projection displays. For mobile displays, our UCF-N2 (low viscosity, negative Δε, high Δn based homogeneous alignment fringe-field switching (called n-FFS mode exhibits superior performance to p-FFS in transmittance, single gamma curve, cell gap insensitivity, and negligible flexoelectric effect. For projection displays using a vertical alignment liquid-crystal-on-silicon (VA LCOS, our high birefringence UCF-N3 mixture enables a submillisecond gray-to-gray response time, which is essential for color sequential displays without noticeable color breakup. Our low viscosity UCF-N2 also enables multi-domain VA displays to use a thinner cell gap for achieving faster response time.

  18. Super high precision 200 ppi liquid crystal display series; Chokoseido 200 ppi ekisho display series

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In mobile equipment, in demand is a high precision liquid crystal display (LCD) having the power of expression equivalent to printed materials like magazines because of the necessity of displaying a large amount of information on a easily potable small screen. In addition, with the spread and high-quality image of digital still cameras, it is strongly desired to display photographed digital image data in high quality. Toshiba Corp., by low temperature polysilicone (p-Si) technology, commercialized the liquid crystal display series of 200 ppi (pixels per inch) precision dealing with the rise of the high-precision high-image quality LCD market. The super high precision of 200 ppi enables the display of smooth beautiful animation comparable to printed sheets of magazines and photographs. The display series are suitable for the display of various information services such as electronic books and electronic photo-viewers including internet. The screen sizes lined up are No. 4 type VGA (640x480 pixels) of a small pocket notebook size and No. 6.3 type XGA (1,024x768 pixels) of a paperback size, with a larger screen to be furthered. (translated by NEDO)

  19. Liquid crystal displays with high brightness of visualization versus active displays

    Science.gov (United States)

    Olifierczuk, Marek; Zieliński, Jerzy

    2007-05-01

    Nowadays Liquid Crystal Displays (LCD) takes the very important place among different visualization devices. It's are used in many standard applications such as computer or video screens. In May 2006, 100" LCD TV monitor had been shown by LG. But beside of this main direction of display development, very interesting - because of insignificant electro-magnetic disturbances - is the possibility of it's applications in motorization and aviation. An example of it can be a glass cockpit of U2 , Boeing 777 or many different car dashboards. On this field beside LCD we have now many another display technologies, but interesting for us are 3 of them: FEDs (Field Emission Displays), OLEDs (Organic Light Emitting Diode), PLEDs (Polymer Light Emitting Diode). The leading position of LCD is a result of LCD unique advantages of flat form, weight, power consumption, and reliability, higher (than CRT) luminance, luminance uniformity, sunlight readability, wide dimming range, fault tolerance and a large active display area with a small border. The basis of starting our investigation was the comparison of passive LCD and the other technology, which can be theoretically used on motorization and aviation field. The following parameters are compared: contrast ratio, luminance level, temperature stability, life-time, operating temperature range, color performance, and depth, viewing cone, technology maturity, availability and cost. In our work an analysis of Liquid Crystal Displays used in specific applications is done. The possibilities of the applications such a display under high lighting level are presented. The presented results of this analysis are obtained from computer program worked by authors, which makes it possible to calculate the optical parameters of transmissive and reflective LCD working in quasi-real conditions. The base assumption of this program are shown. This program calculate the transmission and reflection coefficient of a display taking into account the

  20. Thermal modeling of laser-addressed liquid-crystal displays

    Science.gov (United States)

    Evans, K. E.; Nkansah, M. A.

    1990-06-01

    Optical-absorption calculations and finite-element methods are used to calculate time-dependent temperature profiles in two contrasting laser-addressed liquid-crystal displays. It is shown that the presence of conducting electrode layers has a significant effect on the temperature profiles both by affecting the optical-absorption characteristics of the cell and the resulting thermal conductivity. It is shown that efficient optical absorption does not necessarily result in the best cell-addressing performance.

  1. Green backlighting for TV liquid crystal display using carbon nanotubes

    Science.gov (United States)

    Delepierre, Gabriel; Mahfouz, Rami; Cadete Santos Aires, Francisco J.; Dijon, Jean

    2010-08-01

    A methodology to evaluate the emission characteristics of carbon nanotube layers in the context of liquid crystal display backlighting has been elaborated. Carbon nanotube layers with emission characteristics compatible with backlighting have been demonstrated for growth temperature as low as 400 °C, thanks to the use of plasma pretreatment before growth. This very low growth temperature allows to use soda lime glass for the backlight unit and thus to expect very low cost and very low power consumption devices with this technology.

  2. Fast-response liquid crystal display by the VA-IPS display mode with nematic liquid crystal and polymer networks

    Science.gov (United States)

    Chen, Tien-Jung; Lin, Guan-Jhong; Chen, Bo-Yu; Wu, Jin-Jei; Yang, Ying-Jay

    2012-10-01

    To improve electrooptical characteristics of the vertical aligned (VA) liquid crystal displays (LCDs), the monomer material and in-plane switching (IPS) field produced by interdigital electrodes are employed in LC cells. The fast switching response and well optical transmittance of the VA-IPS display mode are successfully achieved by mixing the nematic LC with polymer networks, attributed to the surface anchoring, and the molecular orientation of the LC cell will be further governed, especially under the greater applied voltage. Furthermore, the high concentration doping of the monomer can effectively improve the response behavior, but it also results in the transmittance sacrificed due to the light scattering, and the threshold voltage (Vth) increased.

  3. Recovery of valuable materials from waste liquid crystal display panel.

    Science.gov (United States)

    Li, Jinhui; Gao, Song; Duan, Huabo; Liu, Lili

    2009-07-01

    Associated with the rapid development of the information and electronic industry, liquid crystal displays (LCDs) have been increasingly sold as displays. However, during the discarding at their end-of-life stage, significant environmental hazards, impacts on health and a loss of resources may occur, if the scraps are not managed in an appropriate way. In order to improve the efficiency of the recovery of valuable materials from waste LCDs panel in an environmentally sound manner, this study presents a combined recycling technology process on the basis of manual dismantling and chemical treatment of LCDs. Three key processes of this technology have been studied, including the separation of LCD polarizing film by thermal shock method the removal of liquid crystals between the glass substrates by the ultrasonic cleaning, and the recovery of indium metal from glass by dissolution. The results show that valuable materials (e.g. indium) and harmful substances (e.g. liquid crystals) could be efficiently recovered or separated through above-mentioned combined technology. The optimal conditions are: (1) the peak temperature of thermal shock to separate polarizing film, ranges from 230 to 240 degrees C, where pyrolysis could be avoided; (2) the ultrasonic-assisted cleaning was most efficient at a frequency of 40 KHz (P = 40 W) and the exposure of the substrate to industrial detergents for 10 min; and (3) indium separation from glass in a mix of concentrated hydrochloric acid at 38% and nitric acid at 69% (HCl:HNO(3):H(2)O = 45:5:50, volume ratio). The indium separation process was conducted with an exposure time of 30 min at a constant temperature of 60 degrees C.

  4. Vacuum pyrolysis characteristics and kinetic analysis of liquid crystal from scrap liquid crystal display panels.

    Science.gov (United States)

    Chen, Ya; Zhang, Lingen; Xu, Zhenming

    2017-04-05

    Recycling of waste liquid crystal display (LCD) panels is an urgent task with the rapid expanding LCD market. However, as important composition of LCD panels, the treatment of liquid crystal is seldom concerned for its low concentration. In present study, a stripping product enriched liquid crystal and indium is gained by mechanical stripping process, in which liquid crystal is enriched from 0.3wt.% to 53wt.% and indium is enriched from 0.02wt.% to 7.95wt.%. For the stripping product, liquid crystal should be removed before indium recovery because (a) liquid crystal will hinder indium recycling; (b) liquid crystal is hazardous waste. Hence, an effective and green approach by vacuum pyrolysis is proposed to treat liquid crystal in the stripping product. The results are summarized as: (i) From the perspective of apparent activation energy, the advantages of vacuum pyrolysis is expounded according to kinetic analysis. (ii) 89.10wt.% of liquid crystal is converted and the content of indium in residue reaches 14.18wt.% under 773K, 15min and system pressure of 20Pa. This study provides reliable information for further industrial application and an essential pretreatment for the next step of indium recycling.

  5. An Adaptive Algorithm of Local dimming for Liquid Crystal Displays

    Directory of Open Access Journals (Sweden)

    Huaxia Wu

    2012-11-01

    Full Text Available The local dimming backlight technique enables liquid crystal display to present images with high contrast ratio and low power consumption. Considering that it is more important to make sure a high quality of the displayed image when reducing the power consumption, therefore, in this paper the new algorithm chooses RPSNR (the peak signal-to-noise ratio =30 as the lowest standard to guarantee the quality of image. RPSNR =30 could provide a value that the maximum distortion of the image can be accepted, then, we substitute the maximum gray level of each region into the formula to judge whether satisfy the flow chart. If the value do not meet the condition, we decrease it one by one until find the right value. Finally, we take the luminance of the right value as backlight luminance.   Meanwhile, a method is also proposed in this paper to simplify the calculation time. Successive searches will be made on the basis of the n (ranging from 0.1 to 1 times of the maximum luminance, and stop when RPSNR>=30. However, in order to guarantee the quality of the image, the 0.7 times of the maximum luminance is used as the minimum backlight luminance. In the end, we only choose 0.7, 0.8 and 0.9 times of the maximum luminance as backlight luminance.

  6. Study on Birefringent Color Generation for a Reflective Ferroelectric Liquid Crystal Display

    Science.gov (United States)

    Valyukh, Sergiy; Valyukh, Iryna; Xu, Peizhi; Chigrinov, Vladimir

    2006-10-01

    We study the possibility of a layer of a surface stabilized ferroelectric liquid crystal coupled with several retardation plates for birefringent color generation. Double and single polarizer reflective bistable dichromatic ferroelectric liquid crystal displays are considered. We demonstrate that one or two retardation plates are sufficient for a display having good color characteristics and high brightness. Optimal parameters for green/red and blue/yellow ferroelectric liquid crystal displays are found.

  7. Micropatterning with a liquid crystal display (LCD) projector.

    Science.gov (United States)

    Itoga, Kazuyoshi; Kobayashi, Jun; Yamato, Masayuki; Okano, Teruo

    2014-01-01

    Photolithography has been applied to biological applications such as cell and protein micropatterning and the fabrication of microfluidic channels. However, the preparation of photomasks for projecting micropattern lighting images is often time consuming and costly. Therefore, we have developed maskless photolithography devices by modifying the optics of commercially available liquid crystal display (LCD) projectors from extended to reduced projection. The developed second and third devices produce practically a centimeter-scale micropattern by dividing an original large mask pattern into several patterns, which are individually and synchronously exposed to substrates with a motorized XY-stage, applying them to cell micropatterning and polydimethylsiloxane (PDMS) microfluidic device production. The first part of this chapter describes the developments of the maskless photolithography devices. The second part describes the exposure control system with a motorized XY-stage. The third part describes the applications of devices to cell micropatterning. The last part describes the application of the devices to the fabrication of the PDMS microfluidic channel. Maskless photolithography with an LCD projector has a large advantage with no requirement for a photomask. In particular, the maskless photolithography devices show a greater power by optimizing the conditions of pattern size and shape.

  8. An electrochemical study of a liquid crystal used in information displays

    Science.gov (United States)

    Oglesby, D. M.; Kern, J. B.; Robertson, J. B.

    1974-01-01

    The operational lifetime of liquid crystal displays were investigated. Electrochemical reaction at the electrodes of the display can cause failure after 2000 to 3000 hours of operation. Studies using cyclic voltametry of electrochemical reactions of N (p-methoxybenzilidene p-butylaniline (MBBA), a nematic liquid crystal were made. These studies indicate the presence of a reversible reduction of MBBA at the cathode, and that the reduction product undergoes a further reaction leading to products which are not reversibly oxidized. It is concluded that the degradation of the liquid crystal in displays can be reduced with a suitable frequency of alternating voltage.

  9. Amorphous silicon crystallization by laser. Report of the experiments at Frascati (Project Foto); Cristallizzazione di silicio amorfo via laser. Rapporto degli esperimenti a frascati (Progetto Foto)

    Energy Technology Data Exchange (ETDEWEB)

    Bollanti, S.; Di Lazzaro, P.; Murra, D. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Div. Fisica Applicata; Imparato, A.; Privato, C. [ENEA, Centro Ricerche Portici, Naples (Italy). Div. Fonti Rinnovabili; Carluccio, R.; Fortunato, G.; Mariucci, L.; Pecora, A. [CNR Istituto di Elettronica dello Stato Solido, Rome (Italy)

    2000-07-01

    The final goal of the Project FOTO is the construction of a laboratory in a clean room for the production of active matrix which can be used to obtain Active Matrix Liquid Crystal Displays (AMLCD). The AMLCD are based on Thin Film Transistors (TFT), which can be obtained by poly-silicon (poly-Si) thin films, achieved, e.g., by irradiating films of amorphous silicon (a-Si) by ultraviolet laser radiation. In this report, are presented the results of the a-Si irradiation by using the laser-facility Hercules (excimer XeCl, l=0,308 mm) done at the ENEA Frascati Centre. The transformation of a-Si into poly-Si is commented upon the variation of the space-time characteristics of the laser pulses, of the irradiation conditions and of the characteristics of the irradiated a-Si films. [Italian] Il macro-obiettivo del Progetto FOTO e' la realizzazione di un laboratorio in camera pulita per lo sviluppo di processi atti a fabbricare matrici attive utilizzabili per ottenere schermi piatti a cristalli liquidi (AMLCD, Active Matrix Liquid Crystal Display). Uno dei primi passi del processo consiste nel creare transistori a film sottile (TFT, Thin Film Transistor). A tal fine, e' necessario ottenere strati sottili di Silicio policristallino irragiando films di silicio amorfo con luce laser ultravioletta. In questo rapporto, sono presentati i risultati degli irraggiamenti di film sottili di silicio amorfo tramite la laser-facility Hercules (eccimero XeCl, l=0,308 mm) effettuati presso il C.R. ENEA di Frascati. La trasformazione di silicio amorfo in silicio policristallino cosi' ottenuta e' commentata al variare delle caratteristiche spazio-temporali dell'impulso laser, delle condizioni di irraggiamento e delle caratteristiche del film di silicio amorfo irraggiato.

  10. Controllable liquid crystal gratings for an adaptive 2D/3D auto-stereoscopic display

    Science.gov (United States)

    Zhang, Y. A.; Jin, T.; He, L. C.; Chu, Z. H.; Guo, T. L.; Zhou, X. T.; Lin, Z. X.

    2017-02-01

    2D/3D switchable, viewpoint controllable and 2D/3D localizable auto-stereoscopic displays based on controllable liquid crystal gratings are proposed in this work. Using the dual-layer staggered structure on the top substrate and bottom substrate as driven electrodes within a liquid crystal cell, the ratio between transmitting region and shielding region can be selectively controlled by the corresponding driving circuit, which indicates that 2D/3D switch and 3D video sources with different disparity images can reveal in the same auto-stereoscopic display system. Furthermore, the controlled region in the liquid crystal gratings presents 3D model while other regions maintain 2D model in the same auto-stereoscopic display by the corresponding driving circuit. This work demonstrates that the controllable liquid crystal gratings have potential applications in the field of auto-stereoscopic display.

  11. 77 FR 3793 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, and Modules, and...

    Science.gov (United States)

    2012-01-25

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Liquid Crystal Display Devices, Including Monitors, Televisions, and Modules, and Components Thereof; Request for Statements on the Public Interest AGENCY: U.S. International Trade Commission...

  12. 77 FR 5055 - Certain Liquid Crystal Display Devices and Products Containing the Same; Determination Not To...

    Science.gov (United States)

    2012-02-01

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Liquid Crystal Display Devices and Products Containing the Same; Determination Not To Review Initial Determination Granting Joint Motion To Terminate Based on Settlement Agreement...

  13. 77 FR 45375 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-07-31

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components Thereof; Commission Determination Not To Review an Initial Determination Terminating the Investigation as...

  14. Modeling the Color Image and Video Quality on Liquid Crystal Displays with Backlight Dimming

    DEFF Research Database (Denmark)

    Korhonen, Jari; Mantel, Claire; Burini, Nino

    2013-01-01

    Objective image and video quality metrics focus mostly on the digital representation of the signal. However, the display characteristics are also essential for the overall Quality of Experience (QoE). In this paper, we use a model of a backlight dimming system for Liquid Crystal Display (LCD...

  15. Single-substrate liquid-crystal displays by photo-enforced stratification

    Science.gov (United States)

    Penterman, Roel; Klink, Stephen I.; de Koning, Henk; Nisato, Giovanni; Broer, Dirk J.

    2002-05-01

    Data visualization plays a crucial role in our society, as illustrated by the many displays that surround us. In the future, displays may become even more pervasive, ranging from individually addressable image-rendering wall hangings to data displays integrated in clothes. Liquid-crystal displays (LCDs) provide most of the flat-panel displays currently used. To keep pace with the ever-increasing possibilities afforded by developments in information technology, we need to develop manufacturing processes that will make LCDs cheaper and larger, with more freedom in design. Existing batch processes for making and filling LCD cells are relatively expensive, with size and shape limitations. Here we report a cost-effective, single-substrate technique in which a coated film is transformed into a polymer-covered liquid-crystal layer. This approach is based on photo-enforced stratification: a two-step photopolymerization-induced phase separation of a liquid-crystal blend and a polymer precursor. The process leads to the formation of micrometre-sized containers filled with a switchable liquid-crystal phase. In this way, displays can be produced on a variety of substrates using current coating technology. The developed process may be an important step towards new technologies such as `display-on-anything' and `paintable displays'.

  16. Polymer-stabilized ferroelectric liquid crystal for flexible displays using plastic substrates

    Science.gov (United States)

    Fujikake, Hideo; Murashige, Takeshi; Sato, Hiroto; Iino, Yoshiki; Kikuchi, Hiroshi; Kawakita, Masahiro; Tsuchiya, Yuzuru

    2001-12-01

    We have developed a ferroelectric liquid crystal device with a novel structure containing a polymer fiber network for flexible lightweight displays using thin plastic substrates. The aligned polymer fibers of sub-micrometers -diameter were formed under ultraviolet light irradiation in a heated nematic- phase solution consisting of liquid crystal and monofunctional acrylate monomer. The rigid polymer network was found to adhere to the two plastic substrates, and the uniform liquid crystal alignment provided a contrast ratio of 100:1 for a monomer concentration of 20 wt%. This device achieves a continuous grayscale capability as a result of change in the spatial distribution of small liquid crystal domains, and also exhibits a fast response time of 80 microsecond(s) due to high-purity separation of polymer and liquid crystal materials. It therefore has attractive features for flexible moving-image display applications.

  17. Charge retention of twisted nematic liquid-crystal displays

    Science.gov (United States)

    Yang, K. H.

    1990-01-01

    A simulated thin-film transistor (TFT) circuit has been built to drive the twisted nematic (TN) cell for the measurements of charge retention and the transmission versus peak voltage applied to the drain electrode of the simulated TFT using the gate pulse width as a parameter. The established rule that the transmission of the TN cell depends only on the rms voltage applied to the cell has been confirmed by calculating the rms voltage of the charge retention curves in correlation with the measured transmissions. The deviation of the decaying charge retention curves from the exponential behavior has been observed and can be qualitatively explained by a combination of the dielectric and transport properties of nematic liquid-crystal medium.

  18. Liquid crystal cell design of VGA field sequential color LCoS display

    Science.gov (United States)

    Liu, Yanyan; Geng, Weidong; Dai, Yongping

    2009-07-01

    The design of liquid crystal cell is an important factor to determine the display quality of LCoS display device. The goal of this paper is to gain VGA field sequential color (FSC) LCoS device used for near-to-eye system. The characteristics of optics and electrooptics for the twist nematic liquid crystal material and the material requirements of the FSC LCoS were studied. The LCOS liquid crystal cell optimized by dynamic parameter space method had an uniform reflectivity (about 90%) for the light with wave length from 450nm to 650nm. Both considering the electrooptic response curve of liquid crystal and the relationship between the contrast ratio and pixel size, we determined to use high speed twist nematic liquid crystal working in normally white mode. The liquid crystal cell gap and the pixel size were determined as 2.5um and 12um, respectively. The VGA FSC LCoS device was fabricated with SMIC 0.35um CMOS process and filled with LC-A liquid crystal of Merck in Varitronix. The measurement showed that the response time of liquid crystal from light to dark was 1.8ms and from dark to light was 4.4ms. The contrast ratio is bigger than 50:1. The LCoS displays well.

  19. Time-multiplexed three-dimensional displays based on directional backlights with fast-switching liquid-crystal displays.

    Science.gov (United States)

    Chien, Ko-Wei; Shieh, Han-Ping D

    2006-05-01

    An autostereoscopic display using a directional backlight with a fast-switching liquid-crystal (LC) display was designed and fabricated to obtain a better perception of 3D images by enhanced resolution and brightness. A grooved light guide in combination with an asymmetric focusing foil was utilized to redirect the emitting cones of light to the left and right eyes, respectively. By designing the groove structures of the focusing foil with rotation from -1.5 degrees to 1.5 degrees in the gradient and having the pitch ratio of the grooved light guide to the focusing foil of less than 3, the boundary angle then shifts from normal viewing and the moiré phenomenon can be suppressed. Cross talk of less than 6% and a LC response time of faster than 7.1 ms further improve the stereoscopic image perception. Additionally, 2D-3D compatibility is provided.

  20. A NEW METHOD TO ALIGN LIQUID CRYSTAL MOLECULES BY LINEAR PHOTO-POLYMERIZATION FOR LIQUID CRYSTAL DISPLAY

    Institute of Scientific and Technical Information of China (English)

    LIANG ZHAO-YAN; FANG KUN; XUAN LI; HUANG XI-MIN; DING BAO-QUAN; LU RAN; ZHAO YING-YING

    2000-01-01

    A new technique to uniformly align liquid crystal molecules is presented.The technique is based on producing an anisotropic surface on the glass substrate coated with photo-polymers by photo-polymerization of linear polarized UVlight.The orientation of liquid crystal molecules is governed by the direction of the polarized vector of UV-light.Using this method,we have studied the photo-polymer PSi-CM aligning LC 6710A molecules.The liquid crystal microscopic texture between crossed polarizers,optical retardation from liquid crystal layers and electro-optical properties of twisted nematic liquid crystal display cell are obtained,which was prepared with one side -photo-alignment and the other siderebbed substrate.

  1. Reduction of image blurring in an autostereoscopic multilayer liquid crystal display

    Science.gov (United States)

    Gotoda, Hironobu

    2011-03-01

    A multilayer liquid crystal display (LCD) is a display device constructed by stacking multiple liquid crystal layers on top of a light source. As shown in a previous study, a multilayer LCD can deliver varying images depending on the viewers'eye positions, and can be used for auto-stereoscopic 3D viewing. However, undesirable blurring is sometimes observed in the images that a viewer receives from the display. Such blurring is notable especially around objects in the scene that are far away from the viewer. To address this problem, we propose to put a convex lens in front of the layers of liquid crystal. The lens refracts the beams of light, thus bringing the effects of moving the objects to nearer positions. Through a simulation-based study, we show that an optimal choice exists for the focal length of the lens, which reduces the local image blurring while not compromising the overall image quality.

  2. Liquid crystal panel for high efficiency barrier type autostereoscopic three-dimensional displays.

    Science.gov (United States)

    Chen, Cheng-Huan; Huang, Yi-Pai; Chuang, Shang-Chih; Wu, Chi-Lin; Shieh, Han-Ping D; Mphepö, Wallen; Hsieh, Chiu-Ting; Hsu, Shih-Chia

    2009-06-20

    An autostereoscopic display with parallax barrier attached onto a liquid crystal panel suffers from the trade-off between brightness and crosstalk. One approach for making improvement by modifying the layout of light blocking components, such as thin film transistor, storage capacitor, and protrusion, in the liquid crystal pixel has been proposed. Ray tracing simulation shows that the aperture of the slanted barrier can be significantly increased, hence increasing efficiency, while keeping the same crosstalk level if those light blocking components can be shifted to the corner of the pixel. A six-view 2.83 in. (7.19 cm) prototype has shown improvement on both brightness and crosstalk compared to its counterpart using a traditional liquid crystal panel, which demonstrates an effective approach for a high-efficiency barrier-type autostereoscopic 3D display with a liquid crystal panel.

  3. Phase separation of monomer in liquid crystal mixtures and surface morphology in polymer-stabilized vertical alignment liquid crystal displays

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Jae Jin; Lee, Jun Hyup; Kim, Kyeong Hyeon [Development Center, LCD Business, SAMSUNG Electronics Co. LTD., Tangjeong-Myeon, Asan, Chungnam 336-741 (Korea, Republic of); Kikuchi, Hirotsuku; Higuchi, Hiroki [Institute for Materials Chemistry and Engineering, Kyushu University, 6-1 Kasuga-Koen, Kasuga 816-8580 (Japan); Kim, Dae Hyun; Lee, Seung Hee, E-mail: jsquare.lyu@samsung.com, E-mail: lsh1@chonbuk.ac.kr [Department of BIN Fusion Technology and Department of Polymer-Nano Science and Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of)

    2011-08-17

    The polymer-stabilized vertically aligned (PS-VA) liquid crystal display (LCD) driving mode has high potential for manufacturing low power consuming displays due to the higher transmittance and fast response as compared with the existing patterned vertically aligned and multi-domain vertically aligned modes. In this paper we have investigated the reaction mechanisms of monomer-liquid crystal blends to form a surface pre-tilt angle of liquid crystal in vertical alignment LCD associated with a fishbone electrode structure. The observed sizes of polymer bumps formed on the substrates were found to be dependent on the exposed UV wavelength and were almost equal in both top and bottom substrates. When a large UV wavelength was used, the phase separation mechanism of monomer in PS-VA mode was found nearly isotropic rather than anisotropic in contrast to the previous studies.

  4. Fast-response liquid-crystal lens for 3D displays

    Science.gov (United States)

    Liu, Yifan; Ren, Hongwen; Xu, Su; Li, Yan; Wu, Shin-Tson

    2014-02-01

    Three-dimensional (3D) display has become an increasingly important technology trend for information display applications. Dozens of different 3D display solutions have been proposed. The autostereoscopic 3D display based on lenticular microlens array is a promising approach, and fast-switching microlens array enables this system to display both 3D and conventional 2D images. Here we report two different fast-response microlens array designs. The first one is a blue phase liquid crystal lens driven by the Pedot: PSS resistive film electrodes. This BPLC lens exhibits several attractive features, such as polarization insensitivity, fast response time, simple driving scheme, and relatively low driving voltage, as compared to other BPLC lens designs. The second lens design has a double-layered structure. The first layer is a polarization dependent polymer microlens array, and the second layer is a thin twisted-nematic (TN) liquid crystal cell. When the TN cell is switched on/off, the traversing light through the polymeric lens array is either focused or defocused, so that 2D/3D images are displayed correspondingly. This lens design has low driving voltage, fast response time, and simple driving scheme. Simulation and experiment demonstrate that the performance of both switchable lenses meet the requirement of 3D display system design.

  5. Bistable light shutter using dye-doped liquid crystals for a see-through display

    Science.gov (United States)

    Huh, Jae-Won; Heo, Joon; Yu, Byeong-Huh; Yoon, Tae-Hoon

    2016-03-01

    See-through displays have got high attention as one of the next generation display devices. Especially, see-through displays that use organic light-emitting diodes (OLEDs) and liquid crystal displays (LCDs) have been actively studied. However, a see-through display using OLEDs cannot provide black color because of their see-through area. Although a see-through display using LCDs can provide black color with crossed polarizers, it cannot block the background. This inevitable problem can be solved by placing a light shutter at the back of a see-through display. To maintain the transparent or opaque state, an electric field must be applied to a light shutter. To achieve low power consumption, a bistable light shutter using polymer-stabilized cholesteric liquid crystals (CLC) has been proposed. It is switchable between the translucent and transparent states only. Therefore, it cannot provide black color. Moreover, it cannot block the background perfectly because of poor performance in the translucent state. In this work we will introduce a bistable light shutter using dye-doped CLCs. To improve the electro-optic characteristics in the opaque state, we employed a crossed electrode structure instead of a parallel one. We will demonstrate that the light shutter can exhibit stable bistable operation between the transparent homeotropic and opaque focal-conic states thanks to polymer stabilization.

  6. Fourier series analysis of fractal lenses: theory and experiments with a liquid-crystal display.

    Science.gov (United States)

    Davis, Jeffrey A; Sigarlaki, Sean P; Craven, Julia M; Calvo, María Luisa

    2006-02-20

    We report on a Fourier series approach that predicts the focal points and intensities produced by fractal zone plate lenses. This approach allows us to separate the effects of the fractal order from those of the lens aperture. We implement these fractal lenses onto a liquid-crystal display and show experimental verification of our theory.

  7. Searching for the preferred backlight intensity in liquid crystal displays with local backlight dimming

    DEFF Research Database (Denmark)

    Korhonen, Jari; Mantel, Claire; Burini, Nino

    2013-01-01

    Local backlight dimming is one of the most promising techniques for reducing power consumption and improving contrast characteristics of liquid crystal displays (LCD). In practice, due to light diffusion and a smaller number of backlight sources than pixels, local backlight dimming must often trade...

  8. The development of self-assembled liquid crystal display alignment layers

    NARCIS (Netherlands)

    Hoogboom, J.; Elemans, J.A.A.W.; Rowan, A.E.; Rasing, T.H.M.; Nolte, R.J.M.

    2007-01-01

    From simple pocket calculators to mobile telephones and liquid crystal display (LCD)-TV, over the past few decades, devices based on LCD technology have proliferated and can now be found in all conceivable aspects of everyday life. Although used in cutting-edge technology, it is surprising that a vi

  9. 77 FR 37067 - Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components...

    Science.gov (United States)

    2012-06-20

    ... [Federal Register Volume 77, Number 119 (Wednesday, June 20, 2012)] [Notices] [Pages 37067-37068] [FR Doc No: 2012-15005] INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-741/749] Certain Liquid Crystal Display Devices, Including Monitors, Televisions, Modules, and Components Thereof; Final...

  10. Technical and radiological image quality comparison of different liquid crystal displays for radiology

    Directory of Open Access Journals (Sweden)

    Dams FE

    2014-10-01

    Full Text Available Francina EM Dams,2 KY Esther Leung,1 Pieter HM van der Valk,2 Marc CJM Kock,2 Jeroen Bosman,1 Sjoerd P Niehof1 1Medical Physics and Technology, 2Department of Radiology, Albert Schweitzer Hospital, Dordrecht, The Netherlands Background: To inform cost-effective decisions in purchasing new medical liquid crystal displays, we compared the image quality in displays made by three manufacturers. Methods: We recruited 19 radiologists and residents to compare the image quality of four liquid crystal displays, including 3-megapixel Barco®, Eizo®, and NEC® displays and a 6-megapixel Barco display. The evaluators were blinded to the manufacturers' names. Technical assessments were based on acceptance criteria and test patterns proposed by the American Association of Physicists in Medicine. Radiological assessments were performed on images from the American Association of Physicists in Medicine Task Group 18. They included X-ray images of the thorax, knee, and breast, a computed tomographic image of the thorax, and a magnetic resonance image of the brain. Image quality was scored on an analog scale (range 0–10. Statistical analysis was performed with repeated-measures analysis of variance. Results: The Barco 3-megapixel display passed all acceptance criteria. The Eizo and NEC displays passed the acceptance criteria, except for the darkest pixel value in the grayscale display function. The Barco 6-megapixel display failed criteria for the maximum luminance response and the veiling glare. Mean radiological assessment scores were 7.8±1.1 (Barco 3-megapixel, 7.8±1.2 (Eizo, 8.1±1.0 (NEC, and 8.1±1.0 (Barco 6-megapixel. No significant differences were found between displays. Conclusion: According to the tested criteria, all the displays had comparable image quality; however, there was a three-fold difference in price between the most and least expensive displays. Keywords: data display, humans, radiographic image enhancement, user-computer interface

  11. Fundamental display properties of flexible devices containing polymer-stabilized ferroelectric liquid crystal between plastic substrates

    Science.gov (United States)

    Fujikake, Hideo; Murashige, Takeshi; Sato, Hiroto; Iino, Yoshiki; Kawakita, Masahiro; Kikuchi, Hiroshi

    2002-09-01

    We describe several fundamental display properties of a flexible ferroelectric liquid crystal device containing polymer fibers between thin plastic substrates. The composite film of liquid crystal and polymer was created from a solution of liquid crystal and monomer materials between the plastic substrates under ultraviolet light irradiation. The dynamic electrooptic response to analog voltage pulses was examined with an incidence of laser beam light, and its light modulation property exhibited good linearity in continuous gray-scale capability. The excellent spatial uniformity of liquid crystal alignment formed between the flexible substrates resulted in high-contrast light modulation, although slight spontaneous bending of liquid crystal alignment in the device plane was recognized. When the laser light beam was obliquely incident on the flexible display device, the measured transmittance revealed that the device has a wide viewing angle of more than 100 deg without contrast reversal. This is considered to be caused by the molecular switching in the device plane and the thin electrooptic layer in the display device.

  12. A Polarizer-free Liquid Crystal Display Using Dye-doped Liquid Crystal Gels

    OpenAIRE

    Lin, Yi-Hsin; Yang, Jhih-Ming; Lin, Hung-Chun; Wu, Jing-Nuo

    2009-01-01

    In conclusion, we have introduced and demonstrated polarizer-free LCDs using dye-doped LC gels. These polarizer-free dye-doped LC gels exhibit high reflectance, high contrast ratio, wide viewing angle, and fast response time. Especially the low temperature process is favorable for flexible displays. The gel-like materials assist stabilizing the flexible display under trimming. Our dye-doped LC gels provide a stable LC mode and open a new window in paper-like flexible displays. A polarizer-fre...

  13. Introduction to grayscale calibration and related aspects of medical imaging grade liquid crystal displays.

    Science.gov (United States)

    Fetterly, Kenneth A; Blume, Hartwig R; Flynn, Michael J; Samei, Ehsan

    2008-06-01

    Consistent presentation of digital radiographic images at all locations within a medical center can help ensure a high level of patient care. Currently, liquid crystal displays (LCDs) are the electronic display technology of choice for viewing medical images. As the inherent luminance (and thereby perceived contrast) properties of different LCDs can vary substantially, calibration of the luminance response of these displays is required to ensure that observer perception of an image is consistent on all displays. The digital imaging and communication in medicine (DICOM) grayscale standard display function (GSDF) defines the luminance response of a display such that an observer's perception of image contrast is consistent throughout the pixel value range of a displayed image. The main purpose of this work is to review the theoretical and practical aspects of calibration of LCDs to the GSDF. Included herein is a review of LCD technology, principles of calibration, and other practical aspects related to calibration and observer perception of images presented on LCDs. Both grayscale and color displays are considered, and the influence of ambient light on calibration and perception is discussed.

  14. Polymer-stabilized blue phase liquid crystal display with slanted wall-shaped electrodes

    Institute of Scientific and Technical Information of China (English)

    Feng Zhou; Qionghua Wang; Di Wu; Jianpeng Cui

    2012-01-01

    A polymer-stabilized blue phase liquid crystal display (BPLCD) with slanted wall-shaped electrodes is proposed. Compared with the traditional BPLCD with wall-shaped electrodes, the electrodes of the proposed BPLCD are slightly angled to obtain phase retardation in the entire cell even at the position of electrodes. The proposed BPLCD demonstrates a relatively higher average transmittance and overall brightness than the traditional BPLCD.%A polymer-stabilized blue phase liquid crystal display (BPLCD) with slanted wall-shaped electrodes is proposed.Compared with the traditional BPLCD with wall-shaped electrodes,the electrodes of the proposed BPLCD are slightly angled to obtain phase retardation in the entire cell even at the position of electrodes.The proposed BPLCD demonstrates a relatively higher average transmittance and overall brightness than the traditional BPLCD.Owing to the continuous improvement in image quality of liquid crystal displays (LCDs),they have been widely employed in desktop monitors,TVs,and mobile displays at present[1-5].With the development of LCDs the polymer-stabilized blue phase LCDs (BPLCDs)[6-11]can replace the conventional LCDs and become the nextgeneration display technology.The polymer-stabilized BPLCDs have numerous attractive features,such as submillisecond gray-to-gray response time,alignmentlayer-free process optically isotropic dark state and cell gap insensitivity[12-14].Because of these advantages,the fabrication processes of the BPLCDs are simplified,motion-image blurs are reduced,and color-sequential displays using RGB LEDs are enabled.

  15. Implementation and analysis of an autostereoscopic display using multiple liquid crystal layers

    Science.gov (United States)

    Gotoda, Hironobu

    2012-03-01

    Multilayer displays are constructed by stacking multiple liquid crystal panels along with a pair of polarizers and a light source. Previous theoretical analyses have shown that such a display could exhibit the light field of a 3D scene if the panels in the display are properly controlled. In this study, we present an implementation of a monochromatic multilayer display using IPS-LCD panels, and report that a reasonable approximation of the light field is actually observed from the display. A major obstacle to constructing a multilayer display is the complexity of optical properties of LCD panels. Since an accurate analytic representation of panels' behavior is difficult to obtain, we have developed an approximate model specific to IPS-LCD cells, using which our implementation is built. We then evaluate the quality of the light field observed from the prototype implementation by examining the images photographed at several camera positions. The results show geometrically correct views are observable from the display within the viewing angle of 30 degrees.

  16. COMPENSATION EFFECT OF POLYIMIDE THIN FILMS ON NORMALLY WHITE TWISTED NEMATIC LIQUID CRYSTAL DISPLAYS

    Institute of Scientific and Technical Information of China (English)

    LI Baozhong; HE Tianbai; DING Mengxian

    1997-01-01

    The disadvantages of Normally White Twisted Nematic Liquid Crystal Display (NW-TN-LCD) were discussed. The reason that the negative birefringent polyimide thin films were used to compensate NW-TN-LCD to decrease off-axis leakage, improve contrast ratios and enlarge viewing angles' was explained in this paper. A certain polyimide thin film was taken as an example to show compensation effect on NW-TN-LCD.

  17. Averaged Stokes polarimetry applied to characterize parallel-aligned liquid crystal on silicon displays

    OpenAIRE

    Márquez Ruiz, Andrés; Martínez Guardiola, Francisco Javier; Gallego Rico, Sergi; Ortuño Sánchez, Manuel; Beléndez Vázquez, Augusto; Pascual Villalobos, Inmaculada

    2014-01-01

    Parallel-aligned liquid crystal on silicon (PA-LCoS) displays have become the most attractive spatial light modulator device for a wide range of applications, due to their superior resolution and light efficiency, added to their phase-only capability. Proper characterization of their linear retardance and phase flicker instabilities is a must to obtain an enhanced application of PA-LCoS. We present a novel polarimetric method, based on Stokes polarimetry, we have recently proposed for the mea...

  18. Milestone in the History of Field-Effect Liquid Crystal Displays and Materials

    Science.gov (United States)

    Schadt, Martin

    2009-03-01

    The history of digital electronics would have been very different without the invention of field-effect liquid crystal displays (LCDs) in 1970 and their sophisticated development and implementation into numerous products. Transmissive and reflective LCDs have become a key interface between man and machine. After almost 40 years of interdisciplinary R+D and engineering, today's LCDs enable virtually all display applications, including high definition television. Field-effect LCDs are characterized by flat design, low weight, low driving voltage, design flexibility, compatibility with silicon-on-glass and very low power consumption, especially in reflection. Their polarization-sensitive layer concept is the basis for sandwiching and integration of optical and electronic thin-film functions. The liquid crystal technology has become a fast growing industry over the past 38 years, today surpassing 100 billion, with many spin-offs into new areas. Prerequisite for field-effect LCDs and their large diversification potential is the unique self-organization of liquid crystals. New applications beyond displays based on self-organisation, smart boundary alignment, dedicated liquid crystalline materials and the ability of LCs to respond to electromagnetic fields, including light, are being developed. Examples for new applications are LC polymer thin-film optics, or synergies between LCDs and solid state back-lighting, such as inorganic and organic light emitting diodes (LEDs/OLEDs).

  19. The study of LED uniform lightguide for liquid crystal display backlight applications

    Science.gov (United States)

    Chien, Chao-Heng; Chen, Zhi-Peng

    2008-08-01

    A conventional backlight unit (BLU) is used to as the light module to present uniform light of liquid crystal display (LCD). In general, cold cathode fluorescent lamp (CCFL) is utilized to be the light source of BLU. The light emitting diode (LED) is now considered well known as a promising device for solid state lighting. It has the advantages of long durability, no mercury substance and good endurance of heavy impact. To satisfy the market demands of the thin-film liquid crystal display (LCD) and the green product, the LED is applied to as the light source to make display thinner, lighter, no Hg containing. In this research, the LED uniform lightguide is demonstrated because it enables the point-like light to distribute propagating-light line pattern successfully. By optimizing the size and the radian of the device, the designed LED uniform lightguide can achieve the output efficiency more than 85%, and its illuminative uniformity is improved about 85%. Thus, the LED uniform lightguide not only can decrease the number of LED to save the space, but also enhance the optical efficiency. In the future, a novel LED uniform module could make displays thinner and lighter for backlight system applications.

  20. Application of pyrolysis process to remove and recover liquid crystal and films from waste liquid crystal display glass.

    Science.gov (United States)

    Lu, Rixin; Ma, En; Xu, Zhenming

    2012-12-01

    Liquid crystal display (LCD) glass mainly consists of polarizing film, liquid crystal and glass substrate. Removing and recovering the liquid crystal and films from the LCD glass effectively has important significance for recovering the other parts. This study proposed a pyrolysis process to recover the organic parts from LCD glass. Through thermal gravimetric analysis, the pyrolysis temperature of the LCD glass could be chosen at 850 K. The removal rate of organic parts from LCD glass reached 87.87 wt%. Pyrolysis products consisted of 66.82 wt% oils, 21.01 wt% gaseous and 12.13 wt% residues. In addition, the oils contained 46.27 wt% acetic acid and 32.94 wt% triphenyl phosphate. Then, the pyrolysis mechanisms and products sources of the liquid crystal glass have been analyzed based on the information of bonds energy. The pyrolysis mechanism analysis proved that the products mainly consisted of acetic acid, triphenyl phosphate and C, which is consistent to the results of GC-MS analysis. A reasonable way has been put forward to recycle the pyrolysis products: acetic acid and triphenyl phosphate can be collected by distillation, the rest oils and gases can be used as fuel and the remained glass can be used to extract indium and to produce building materials.

  1. Apparatus and method for remotely monitoring a utility meter by use of a liquid crystal display

    Energy Technology Data Exchange (ETDEWEB)

    Gombrich, P.P.; Case, S.K.; Konicek, L.R.

    1986-12-09

    An apparatus is described for optically sensing the angular position of a pointer member fixedly mounted on a rotatable shaft for rotational movement therewith as the shaft rotates about an axis of rotation, the apparatus comprising: (a) a follower member fixedly interconnected into the rotatable shaft for rotation about the axis of rotation with the pointer member, the follower member and the pointer having a circumferential path of travel. The follower member has first and second opposite sides facing in opposite axial directions, a first portion of the first side being generally reflective for reflecting light in a forward direction and a second portion being generally absorptive; (b) light emitting means positioned forward of the following member for emitting light in a backward direction towards the first side of the follower member; (c) light detecting means positioned forward of the follower member for detecting light reflected off of the follower member in a forward direction; and (d) liquid crystal display means positioned forward of the follower member, between the follower member and the light detecting means. The liquid crystal display means defines six distinct areas disposed about the circumferential path of the follower member and a background area encompassing the remaining area of the liquid crystal shutter means.

  2. Cylindrical liquid crystal lenses system for autostereoscopic 2D/3D display

    Science.gov (United States)

    Chen, Chih-Wei; Huang, Yi-Pai; Chang, Yu-Cheng; Wang, Po-Hao; Chen, Po-Chuan; Tsai, Chao-Hsu

    2012-06-01

    The liquid crystal lenses system, which could be electrically controlled easily for autostereoscopic 2D/3D switchable display was proposed. The High-Resistance liquid crystal (HRLC) lens utilized less controlled electrodes and coated a high-resistance layer between the controlled-electrodes was proposed and was used in this paper. Compare with the traditional LC lens, the HR-LC Lens could provide smooth electric-potential distribution within the LC layer under driving status. Hence, the proposed HR-LC Lens had less circuit complexity, low driving voltage, and good optical performance also could be obtained. In addition, combining with the proposed driving method called dual-directional overdriving method, the above method could reduce the switching time by applying large voltage onto cell. Consequently, the total switching time could be further reduced to around 2second. It is believed that the LC lens system has high potential in the future.

  3. Effect of wavelength on the laser patterning of a cholesteric liquid crystal display electrode

    Energy Technology Data Exchange (ETDEWEB)

    Li, C.H., E-mail: chunhanli@itri.org.tw [Laser Application Technology Center / Industrial Technology Research Institute South (ITRI South),8 Gongyan Rd., Liujia Dist., Tainan City 734, Taiwan, R.O.C. (China); Lin, H.K. [Laser Application Technology Center / Industrial Technology Research Institute South (ITRI South),8 Gongyan Rd., Liujia Dist., Tainan City 734, Taiwan, R.O.C. (China); Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology, 1, Shuefu Road, Neipu, Pingtung 912, Taiwan, R.O.C. (China)

    2013-02-01

    A 1064 nm fiber laser and a 355 nm ultraviolet solid-state laser with galvanometer scanners and F-theta lenses are used to rapidly etch the silver electrode pattern of a cholesteric liquid crystal display. These results of the two laser processes are that the 1064 nm laser effectively reduces the damage to the liquid crystal layer and underlying indium tin oxide layer, and reduces the heat-affected zone of the ablated silver electrode. - Highlights: ► Laser patterning reduces the process time and costs lower than screen printing process. ► Etching of silver electrodes using 355-nm and 1064-nm lasers is compared. ► 1064-nm fiber laser can improve throughput, lower cost, and increase pattern quality.

  4. In-Plane Switching Mode for Liquid Crystal Displays Using a DNA Alignment Layer.

    Science.gov (United States)

    Cha, Yun Jeong; Gim, Min-Jun; Oh, Kyunghwan; Yoon, Dong Ki

    2015-06-24

    We successfully fabricated the in-plane switching mode (IPS) LC display (LCD) based on a double stranded DNA (dsDNA) alignment layer. As widely known, the DNA has the right-handed double helical structure that has naturally grown grooves with a very regular period, which can be used as an alignment layer to control the orientation of liquid crystal (LC) molecules. The LC molecules on this topographical layer of DNA material align obliquely at a specific angle with respect to the direction of DNA chains, providing an instant and convenient tool for the fabrication of the IPS display compared to the conventional ways such as rubbing and mechanical shearing methods. The electro-optical performance and response time of this device were also investigated. Our result will be of great use in further exploration of the electro-optical properties of the other biomaterials.

  5. Low voltage transflective blue-phase liquid crystal display with a non-uniform etching substrate

    Science.gov (United States)

    Wang, Jian; Mao, Jiang-Lin; Fan, Hao-Xiang; Wang, Qiong-Hua

    2016-09-01

    A transflective polymer-stabilized blue-phase liquid crystal display (BP-LCD) with a non-uniform etching substrate is proposed. In-plane switching (IPS) electrodes on the bottom substrate are put on the different gaps, and the bottom substrate between the electrodes is etched into different depths in transmissive (T) and reflective (R) regions. This structure can balance the optical phase retardation in the two regions and is helpful to achieve well-matched voltag-dependent transmittance and reflectance curves. This transflective display has high optical efficiency, a wide viewing angle, and low operating voltage (approximately 6 V). Project supported by the National Natural Science Foundation of China (Grant Nos. 61535007 and 61320106015) and the National Basic Research Program of China (Grant No. 2013CB328802).

  6. Towards an optimal model for a bistable nematic liquid crystal display device

    KAUST Repository

    Cummings, L. J.

    2013-03-13

    Bistable liquid crystal displays offer the potential for considerable power savings compared with conventional (monostable) LCDs. The existence of two stable field-free states that are optically distinct means that contrast can be maintained in a display without an externally applied electric field. An applied field is required only to switch the device from one state to the other, as needed. In this paper we examine a theoretical model of a possible bistable device, originally proposed by Cummings and Richardson (Euro J Appl Math 17:435-463 2006), and explore means by which it may be optimized, in terms of optical contrast, manufacturing considerations, switching field strength, and switching times. The compromises inherent in these conflicting design criteria are discussed. © 2013 Springer Science+Business Media Dordrecht.

  7. Holographic three-dimensional display and hologram calculation based on liquid crystal on silicon device [invited].

    Science.gov (United States)

    Li, Junchang; Tu, Han-Yen; Yeh, Wei-Chieh; Gui, Jinbin; Cheng, Chau-Jern

    2014-09-20

    Based on scalar diffraction theory and the geometric structure of liquid crystal on silicon (LCoS), we study the impulse responses and image depth of focus in a holographic three-dimensional (3D) display system. Theoretical expressions of the impulse response and the depth of focus of reconstructed 3D images are obtained, and experimental verifications of the imaging properties are performed. The results indicated that the images formed by holographic display based on the LCoS device were periodic image fields surrounding optical axes. The widths of the image fields were directly proportional to the wavelength and diffraction distance, and inversely proportional to the pixel size of the LCoS device. Based on the features of holographic 3D imaging and focal depth, we enhance currently popular hologram calculation methods of 3D objects to improve the computing speed of hologram calculation.

  8. Liquid-crystal displays for medical imaging: a discussion of monochrome versus color

    Science.gov (United States)

    Wright, Steven L.; Samei, Ehsan

    2004-05-01

    A common view is that color displays cannot match the performance of monochrome displays, normally used for diagnostic x-ray imaging. This view is based largely on historical experience with cathode-ray tube (CRT) displays, and does not apply in the same way to liquid-crystal displays (LCDs). Recent advances in color LCD technology have considerably narrowed performance differences with monochrome LCDs for medical applications. The most significant performance advantage of monochrome LCDs is higher luminance, a concern for use under bright ambient conditions. LCD luminance is limited primarily by backlight design, yet to be optimized for color LCDs for medical applications. Monochrome LCDs have inherently higher contrast than color LCDs, but this is not a major advantage under most conditions. There is no practical difference in luminance precision between color and monochrome LCDs, with a slight theoretical advantage for color. Color LCDs can provide visualization and productivity enhancement for medical applications, using digital drive from standard commercial graphics cards. The desktop computer market for color LCDs far exceeds the medical monitor market, with an economy of scale. The performance-to-price ratio for color LCDs is much higher than monochrome, and warrants re-evaluation for medical applications.

  9. Temporal properties of liquid crystal displays: implications for vision science experiments.

    Directory of Open Access Journals (Sweden)

    Tobias Elze

    Full Text Available Liquid crystal displays (LCD are currently replacing the previously dominant cathode ray tubes (CRT in most vision science applications. While the properties of the CRT technology are widely known among vision scientists, the photometric and temporal properties of LCDs are unfamiliar to many practitioners. We provide the essential theory, present measurements to assess the temporal properties of different LCD panel types, and identify the main determinants of the photometric output. Our measurements demonstrate that the specifications of the manufacturers are insufficient for proper display selection and control for most purposes. Furthermore, we show how several novel display technologies developed to improve fast transitions or the appearance of moving objects may be accompanied by side-effects in some areas of vision research. Finally, we unveil a number of surprising technical deficiencies. The use of LCDs may cause problems in several areas in vision science. Aside from the well-known issue of motion blur, the main problems are the lack of reliable and precise onsets and offsets of displayed stimuli, several undesirable and uncontrolled components of the photometric output, and input lags which make LCDs problematic for real-time applications. As a result, LCDs require extensive individual measurements prior to applications in vision science.

  10. Pixel-level tunable liquid crystal lenses for auto-stereoscopic display

    Science.gov (United States)

    Li, Kun; Robertson, Brian; Pivnenko, Mike; Chu, Daping; Zhou, Jiong; Yao, Jun

    2014-02-01

    Mobile video and gaming are now widely used, and delivery of a glass-free 3D experience is of both research and development interest. The key drawbacks of a conventional 3D display based on a static lenticular lenslet array and parallax barriers are low resolution, limited viewing angle and reduced brightness, mainly because of the need of multiple-pixels for each object point. This study describes the concept and performance of pixel-level cylindrical liquid crystal (LC) lenses, which are designed to steer light to the left and right eye sequentially to form stereo parallax. The width of the LC lenses can be as small as 20-30 μm, so that the associated auto-stereoscopic display will have the same resolution as the 2D display panel in use. Such a thin sheet of tunable LC lens array can be applied directly on existing mobile displays, and can deliver 3D viewing experience while maintaining 2D viewing capability. Transparent electrodes were laser patterned to achieve the single pixel lens resolution, and a high birefringent LC material was used to realise a large diffraction angle for a wide field of view. Simulation was carried out to model the intensity profile at the viewing plane and optimise the lens array based on the measured LC phase profile. The measured viewing angle and intensity profile were compared with the simulation results.

  11. Temporal properties of liquid crystal displays: implications for vision science experiments.

    Science.gov (United States)

    Elze, Tobias; Tanner, Thomas G

    2012-01-01

    Liquid crystal displays (LCD) are currently replacing the previously dominant cathode ray tubes (CRT) in most vision science applications. While the properties of the CRT technology are widely known among vision scientists, the photometric and temporal properties of LCDs are unfamiliar to many practitioners. We provide the essential theory, present measurements to assess the temporal properties of different LCD panel types, and identify the main determinants of the photometric output. Our measurements demonstrate that the specifications of the manufacturers are insufficient for proper display selection and control for most purposes. Furthermore, we show how several novel display technologies developed to improve fast transitions or the appearance of moving objects may be accompanied by side-effects in some areas of vision research. Finally, we unveil a number of surprising technical deficiencies. The use of LCDs may cause problems in several areas in vision science. Aside from the well-known issue of motion blur, the main problems are the lack of reliable and precise onsets and offsets of displayed stimuli, several undesirable and uncontrolled components of the photometric output, and input lags which make LCDs problematic for real-time applications. As a result, LCDs require extensive individual measurements prior to applications in vision science.

  12. The (unsuitability of modern liquid crystal displays (LCDs for vision research

    Directory of Open Access Journals (Sweden)

    Masoud eGhodrati

    2015-03-01

    Full Text Available Psychophysical and physiological studies of vision have traditionally used cathode ray tube (CRT monitors to present stimuli. These monitors are no longer easily available, and liquid crystal display (LCD technology is continually improving; therefore, we characterised a number of LCD monitors to determine if newer models are suitable replacements for CRTs in the laboratory. We compared the spatial and temporal characteristics of a CRT with five LCDs, including monitors designed with vision science in mind (ViewPixx and Display++, prosumer gaming monitors, and a consumer-grade LCD. All monitors had sufficient contrast, luminance range and reliability to support basic vision experiments with static images. However, the luminance of all LCDs depended strongly on viewing angle, which in combination with the poor spatial uniformity of all monitors except the VPixx, caused up to 80% drops in effective luminance in the periphery during central fixation. Further, all monitors showed significant spatial dependence, as the luminance of one area was modulated by the luminance of other areas. These spatial imperfections are most pronounced for experiments that use large or peripheral visual stimuli. In the temporal domain, the gaming LCDs were unable to generate reliable luminance patterns; one was unable to reach the requested luminance within a single frame whereas in the other the luminance of one frame affected the luminance of the next frame. The VPixx and Display++ were less affected by these problems, and had good temporal properties provided stimuli were presented for 2 or more frames. Of the consumer-grade and gaming displays tested, and if problems with spatial uniformity are taken into account, the Eizo FG2421 is the most suitable alternative to CRTs. The specialized ViewPixx performed best among all the tested LCDs, followed closely by the Display++; both are good replacements for a CRT, provided their spatial imperfections are considered.

  13. Panoramic projection avionics displays

    Science.gov (United States)

    Kalmanash, Michael H.

    2003-09-01

    Avionics projection displays are entering production in advanced tactical aircraft. Early adopters of this technology in the avionics community used projection displays to replace or upgrade earlier units incorporating direct-view CRT or AMLCD devices. Typical motivation for these upgrades were the alleviation of performance, cost and display device availability concerns. In these systems, the upgraded (projection) displays were one-for-one form / fit replacements for the earlier units. As projection technology has matured, this situation has begun to evolve. The Lockheed-Martin F-35 is the first program in which the cockpit has been specifically designed to take advantage of one of the more unique capabilities of rear projection display technology, namely the ability to replace multiple small screens with a single large conformal viewing surface in the form of a panoramic display. Other programs are expected to follow, since the panoramic formats enable increased mission effectiveness, reduced cost and greater information transfer to the pilot. Some of the advantages and technical challenges associated with panoramic projection displays for avionics applications are described below.

  14. Rigorous analysis of an electric-field-driven liquid crystal lens for 3D displays

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bong-Sik; Lee, Seung-Chul; Park, Woo-Sang [Inha University, Incheon (Korea, Republic of)

    2014-08-15

    We numerically analyzed the optical performance of an electric field driven liquid crystal (ELC) lens adopted for 3-dimensional liquid crystal displays (3D-LCDs) through rigorous ray tracing. For the calculation, we first obtain the director distribution profile of the liquid crystals by using the Erickson-Leslie motional equation; then, we calculate the transmission of light through the ELC lens by using the extended Jones matrix method. The simulation was carried out for a 9 view 3D-LCD with a diagonal of 17.1 inches, where the ELC lens was slanted to achieve natural stereoscopic images. The results show that each view exists separately according to the viewing position at an optimum viewing distance of 80 cm. In addition, our simulation results provide a quantitative explanation for the ghost or blurred images between views observed from a 3D-LCD with an ELC lens. The numerical simulations are also shown to be in good agreement with the experimental results. The present simulation method is expected to provide optimum design conditions for obtaining natural 3D images by rigorously analyzing the optical functionalities of an ELC lens.

  15. Using channelized Hotelling observers to quantify temporal effects of medical liquid crystal displays on detection performance

    Science.gov (United States)

    Platiša, Ljiljana; Goossens, Bart; Vansteenkiste, Ewout; Badano, Aldo; Philips, Wilfried

    2010-02-01

    Clinical practice is rapidly moving in the direction of volumetric imaging. Often, radiologists interpret these images in liquid crystal displays at browsing rates of 30 frames per second or higher. However, recent studies suggest that the slow response of the display can compromise image quality. In order to quantify the temporal effect of medical displays on detection performance, we investigate two designs of a multi-slice channelized Hotelling observer (msCHO) model in the task of detecting a single-slice signal in multi-slice simulated images. The design of msCHO models is inspired by simplifying assumptions about how humans observe while viewing in the stack-browsing mode. For comparison, we consider a standard CHO applied only on the slice where the signal is located, recently used in a similar study. We refer to it as a single-slice CHO (ssCHO). Overall, our results confirm previous findings that the slow response of displays degrades the detection performance of the observers. More specifically, the observed performance range of msCHO designs is higher compared to the ssCHO suggesting that the extent and rate of degradation, though significant, may be less drastic than previously estimated by the ssCHO. Especially, the difference between msCHO and ssCHO is more significant for higher browsing speeds than for slow image sequences or static images. This, together with their design criteria driven by the assumptions about humans, makes the msCHO models promising candidates for further studies aimed at building anthropomorphic observer models for the stack-mode image presentation.

  16. Characterization of the anamorphic and frequency dependent phenomenon in Liquid Crystal on Silicon displays

    Science.gov (United States)

    Lobato, L.; Lizana, A.; Márquez, A.; Moreno, I.; Iemmi, C.; Campos, J.; Yzuel, M. J.

    2011-04-01

    The diffractive efficiency of Liquid Crystal on Silicon (LCoS) displays can be greatly diminished by the appearance of temporal phase fluctuations in the reflected beam, depolarization effects and also because of phase modulation depths smaller than 2π. In order to maximize the efficiency of the Diffractive Optical Elements (DOEs) implemented in the LCoS device, the Minimum Euclidean Distance principle can be applied. However, not all the diffractive elements can be corrected in the same way due to the anamorphic and frequency dependent phenomenon, which is related to the LCoS response, largely dependending on the period and the spatial orientation of the generated DOE. Experimental evidence for the anamorphic and frequency dependent phenomenon is provided in this paper, as well as a comparative study between the efficiency obtained for binary gratings of different periods

  17. Enhanced contrast ratio of homogeneously aligned liquid crystal displays by controlling the surface-anchoring strength

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Young Jin; Woo, Chang Woo; Oh, Sang Hoon; Mukherjee, Amrita; Lee, Seung Hee [Department of BIN Fusion Technology and Department of Polymer Nano-Science and Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Baek, Ji Ho; Kim, Kyeong Jin; Yang, Myung Su, E-mail: lsh1@chonbuk.ac.kr [Panel Performance Department, LG Display Co., Ltd., Paju, Gyeonggi-do 413-811 (Korea, Republic of)

    2011-08-17

    The dark state of homogeneously aligned liquid crystal displays (LCDs) associated with the in-plane switching of a LC director depends on their molecular ordering. We propose a new approach to reduce the light leakage in the dark state of homogeneously aligned LCDs. A very small amount of reactive mesogen (RM) is mixed with the LC material and polymerized at room temperature and also at a low temperature (-20 {sup 0}C) to strengthen the surface-anchoring energy. The contrast ratio of the low-temperature cured cell is improved by about 50% over that of the pure LC cell and the room temperature cured RM-mixed LC cell due to an enhanced order parameter.

  18. A liquid crystal display with consistent moving image quality regardless of viewing angles

    Science.gov (United States)

    Kim, Jong-Man; Kim, Seung-Ryul; Kim, Jongbin; Kim, Minkoo; Lee, Seung-Woo

    2014-08-01

    This paper proposes a new overdrive (OD) technology to precisely compensate for the viewing angle dependent characteristics of LCDs. This paper reports that optical response of liquid crystal displays (LCDs) is considerably dependent on viewing angles for the first time. The new OD technology applies different OD look-up tables (LUTs) depending on the viewing angles. In addition, we combine a new OD technology with an eye tracker that is usually adopted for autostereoscopic 3D LCD systems. The application results show that a new OD technology improves the motion image quality perfectly regardless of viewing angles. We expect that our proposed method will definitely enable the LCD products to have consistent motion image quality regardless of viewing angles.

  19. Hydrometallurgical Recovery of Indium from Flat-Panel Displays of Spent Liquid Crystal Televisions

    Science.gov (United States)

    Inoue, Katsutoshi; Alam, Shafiq

    2015-02-01

    A recovery process for indium from waste liquid crystal display panels was developed on the basis of hydrometallurgical technology. The powdered sample was leached with 3 M HCl to extract its various metal constituents (indium, aluminum, tin, etc.). The mutual separation and subsequent recovery of the dissolved metals was achieved using two column adsorption tests: The first column was packed with a porous resin impregnated with Aliquat 336, a commercially available solvent extraction reagent based on a quaternary ammonium compound, and the resin contained in the second column was impregnated with Cyanex 923, also a commercially available solvent extraction reagent based on trialkylphosphine oxide. In the first column, tin, iron, and zinc were removed from the leach liquor. In the second column, only indium was selectively recovered. The metal ions trapped in these columns were eluted with 0.1 M H2SO4, yielding a solution purified indium solution with a concentration 10 times that of the feed solution.

  20. Graphene oxide liquid crystals: synthesis, phase transition, rheological property, and applications in optoelectronics and display

    Science.gov (United States)

    Lin, Feng; Tong, Xin; Wang, Yanan; Bao, Jiming; Wang, Zhiming M.

    2015-11-01

    Graphene oxide (GO) liquid crystals (LCs) are macroscopically ordered GO flakes dispersed in water or polar organic solvents. Since the first report in 2011, GO LCs have attracted considerable attention for their basic properties and potential device applications. In this review, we summarize recent developments and present a comprehensive understanding of GO LCs via many aspects ranging from the exfoliation of GO flakes from graphite, to phases and phase transitions under various conditions, the orientational responses of GO under external magnetic and electric fields, and finally Kerr effect and display applications. The emphasis is placed on the unique and basic properties of GO and their ordered assembly. We will also discuss challenges and issues that need to be overcome in order to gain a more fundamental understanding and exploit full device potentials of GO LCs.

  1. Novel cell parameter determination of a twisted-nematic liquid crystal display

    Institute of Scientific and Technical Information of China (English)

    Huang Xia; Jing Hai; Fu Guo-Zhu

    2008-01-01

    In this paper a novel method is proposed to determine the cell parameters including the twist angle, optic retardation and rubbing direction of twisted-nematic liquid crystal displays (TNLCD) by rotating the TNLCD. It is a single-wavelength method. Because using subtraction equation of transmittance as curve fitting equation, the influence of the light from environment and the absorption by polarizer, the sample of TNLCD and analyser on the transmittance is eliminated. Accurate results can also be obtained in imperfect darkness. By large numbers of experiments, we found that not only the experimental setup is quite simple and can be easily adopted to be carried out, but also the results are accurate.

  2. Colorimetric characterization of liquid crystal display using an improved two-stage model

    Institute of Scientific and Technical Information of China (English)

    Yong Wang; Haisong Xu

    2006-01-01

    @@ An improved two-stage model of colorimetric characterization for liquid crystal display (LCD) was proposed. The model included an S-shape nonlinear function with four coefficients for each channel to fit the Tone reproduction curve (TRC), and a linear transfer matrix with black-level correction. To compare with the simple model (SM), gain-offset-gain (GOG), S-curve and three-one-dimensional look-up tables (3-1D LUTs) models, an identical LCD was characterized and the color differences were calculated and summarized using the set of 7 × 7 × 7 digital-to-analog converter (DAC) triplets as test data. The experimental results showed that the model was outperformed in comparison with the GOG and SM ones, and near to that of the S-curve model and 3-1D LUTs method.

  3. Pyrolysis characteristics and pyrolysis products separation for recycling organic materials from waste liquid crystal display panels

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ruixue; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

    2016-01-25

    Highlights: • Pyrolysis characteristics are conducted for a better understanding of LCDs pyrolysis. • Optimum design is developed which is significant to guide the further industrial process. • Acetic acid and TPP are recycled and separated. - Abstract: Waste liquid crystal display (LCD) panels mainly contain inorganic materials (glass substrate with indium-tin oxide film), and organic materials (polarizing film and liquid crystal). The organic materials should be removed beforehand since the organic matters would hinder the indium recycling process. In the present study, pyrolysis process is used to remove the organic materials and recycle acetic as well as and triphenyl phosphate (TPP) from waste LCD panels in an environmental friendly way. Several highlights of this study are summarized as follows: (i) Pyrolysis characteristics and pyrolysis kinetics analysis are conducted which is significant to get a better understanding of the pyrolysis process. (ii) Optimum design is developed by applying Box–Behnken Design (BBD) under response surface methodology (RSM) for engineering application which is significant to guide the further industrial recycling process. The oil yield could reach 70.53 wt% and the residue rate could reach 14.05 wt% when the pyrolysis temperature is 570 °C, nitrogen flow rate is 6 L min{sup −1} and the particle size is 0.5 mm. (iii) Furthermore, acetic acid and TPP are recycled, and then separated by rotary evaporation, which could reduce the consumption of fossil energy for producing acetic acid, and be reused in electronics manufacturing industry.

  4. Pyrolysis characteristics and pyrolysis products separation for recycling organic materials from waste liquid crystal display panels.

    Science.gov (United States)

    Wang, Ruixue; Xu, Zhenming

    2016-01-25

    Waste liquid crystal display (LCD) panels mainly contain inorganic materials (glass substrate with indium-tin oxide film), and organic materials (polarizing film and liquid crystal). The organic materials should be removed beforehand since the organic matters would hinder the indium recycling process. In the present study, pyrolysis process is used to remove the organic materials and recycle acetic as well as and triphenyl phosphate (TPP) from waste LCD panels in an environmental friendly way. Several highlights of this study are summarized as follows: (i) Pyrolysis characteristics and pyrolysis kinetics analysis are conducted which is significant to get a better understanding of the pyrolysis process. (ii) Optimum design is developed by applying Box-Behnken Design (BBD) under response surface methodology (RSM) for engineering application which is significant to guide the further industrial recycling process. The oil yield could reach 70.53 wt% and the residue rate could reach 14.05 wt% when the pyrolysis temperature is 570 °C, nitrogen flow rate is 6 L min(-1) and the particle size is 0.5 mm. (iii) Furthermore, acetic acid and TPP are recycled, and then separated by rotary evaporation, which could reduce the consumption of fossil energy for producing acetic acid, and be reused in electronics manufacturing industry. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Pyrolysis mechanism for recycle renewable resource from polarizing film of waste liquid crystal display panels.

    Science.gov (United States)

    Wang, Ruixue; Xu, Zhenming

    2014-08-15

    Liquid crystal display (LCD) panels mainly consist of polarizing film, liquid crystal and glass substrates. In this study, a novel pyrolysis model and a pyrolysis mechanism to recover the reusable resource from polarizing film of waste LCD panels was proposed. Polarizing film and its major components, such as cellulose triacetate (TAC) and polyvinyl alcohol (PVA) were pyrolyzed, respectively, to model the pyrolysis process. The pyrolysis process mainly generated a large ratio of oil, a few gases and a little residue. Acetic acid was the main oil product and could be easily recycled. The pyrolysis mechanism could be summarized as follows: (i) TAC, the main component of polarizing film, was heated and generated active TAC with a low polymerization, and then decomposed into triacetyl-d-glucose. (ii) Some triacetyl-d-glucose generated triacetyl-d-mannosan and its isomers through an intramolecular dehydration, while most triacetyl-d-glucose generated the main oil product, namely acetic acid, through a six-member cyclic transition state. (iii) Meanwhile, other products formed through a series of bond cleavage, dehydration, dehydrogenation, interesterification and Diels-Alder cycloaddition. This study could contribute significantly to understanding the polarizing film pyrolysis performance and serve as guidance for the future technological parameters control of the pyrolysis process.

  6. Viewing angle switching of liquid crystal display using fringe-field switching to control off-axis phase retardation

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Young Jin; Kim, Jin Ho; Her, Jung Hwa; Lee, Seung Hee [Polymer BIN Fusion Research Center, Department of Polymer Nano-Science and Technology, Chonbuk National University, Chonju, Chonbuk 561-756 (Korea, Republic of); Park, Kyoung Ho; Lee, Joun Ho; Kim, Byeong Koo [Mobile Product Development Department, LG Display Company, Ltd, Gumi, Gyungbuk 730-350 (Korea, Republic of); Kang, Wan-Seok; Lee, Gi-Dong, E-mail: gdlee@dau.ac.k, E-mail: lsh1@chonbuk.ac.k [Department of Electronics Engineering, Dong-A University, Pusan 604-714 (Korea, Republic of)

    2010-03-03

    A viewing angle switchable liquid crystal display associated with fringe-field switching mode is proposed. In the device, one pixel is composed of a main pixel and a sub-pixel, in which both pixels are formed to generate a fringe electric field. However, the field directions are different from each other so that in the main pixel, the fringe field rotates the liquid crystal for displaying the main image, whereas it controls only the tilt angle of the liquid crystal without rotating in the sub-pixel region. In this way, phase retardation to cause leakage of light at the off-normal axis can be generated in the sub-pixel, and by utilizing the light, the main displayed image in the normal direction can be blocked in the oblique viewing direction.

  7. Need for liquid-crystal display monitors having the capability of rendering higher than 8 bits in display-bit depth.

    Science.gov (United States)

    Hiwasa, Takeshi; Morishita, Junji; Hatanaka, Shiro; Ohki, Masafumi; Toyofuku, Fukai; Higashida, Yoshiharu

    2009-01-01

    Our purpose in this study was to examine the potential usefulness of liquid-crystal display (LCD) monitors having the capability of rendering higher than 8 bits in display-bit depth. An LCD monitor having the capability of rendering 8, 10, and 12 bits was used. It was calibrated to the grayscale standard display function with a maximum luminance of 450 cd/m(2) and a minimum of 0.75 cd/m(2). For examining the grayscale resolution reported by ten observers, various simple test patterns having two different combinations of luminance in 8, 10, and 12 bits were randomly displayed on the LCD monitor. These patterns were placed on different uniform background luminance levels, such as 0, 50, and 100%, for maximum luminance. All observers participating in this study distinguished a smaller difference in luminance than one gray level in 8 bits irrespective of background luminance levels. As a result of the adaptation processes of the human visual system, observers distinguished a smaller difference in luminance as the luminance level of the test pattern was closer to the background. The smallest difference in luminance that observers distinguished was four gray levels in 12 bits, i.e., one gray level in 10 bits. Considering the results obtained by use of simple test patterns, medical images should ideally be displayed on LCD monitors having 10 bits or greater so that low-contrast objects with small differences in luminance can be detected and for providing a smooth gradation of grayscale.

  8. Applying Ant Colony Algorithm and Neural Network Model to Color Deviation Defect Detection in Liquid Crystal Displays

    Directory of Open Access Journals (Sweden)

    Hong-Dar Lin

    2005-06-01

    Full Text Available Thin Film Transistor Liquid Crystal Display (TFT-LCD has excellent properties such as lower voltage to start and less occupied space if comparing with traditional Cathode-Ray Tube (CRT. But screen flaw points and display color deviation defects on image display exist in TFT-LCD products. This research proposes a new automated visual inspection method to solve the problems. We first use multivariate Hotelling T2 statistic for integrating coordinates of color models to construct a T2 energy diagram for inspecting defects and controlling patterns in TFT-LCD display images. An Ant Colony based approach that integrates computer vision techniques is developed to detect the flaw point defects. Then, Back Propagation Network (BPN model is proposed to inspect small deviation defects of the LCD display colors. Experimental results show the proposed system can provide good effects and practicality.

  9. Ray-tracing simulations of liquid-crystal gradient-index lenses for three-dimensional displays

    NARCIS (Netherlands)

    Sluijter, M.; Herzog, A.; De Boer, D.K.G.; Krijn, M.P.C.M.; Urbach, P.H.

    2009-01-01

    For the first time, to our knowledge, we report ray-tracing simulations of an advanced liquid-crystal gradientindex lens structure for application in switchable two-dimensional/three-dimensional (3D) autostereoscopic displays. We present ray-tracing simulations of the angular-dependent lens action.

  10. Study on the waste liquid crystal display treatment: focus on the resource recovery.

    Science.gov (United States)

    Wang, Xinying; Lu, Xuebin; Zhang, Shuting

    2013-01-15

    A process combined pyrolysis and acid immersion was proposed in this study to dispose the hazardous liquid crystal display (LCD) waste for recovering valuable resources. The thermogravimetric (TG) analysis and fixed bed pyrolysis were investigated for the polarizing film that was separated from LCD. The results suggested the liquid product mainly contained acids, esters and aromatics should be upgraded such as hydrotreating process before used as industrial feedstock or fuel source. The gaseous product mainly consisted of H(2), CO, CO(2) and CH(4) can be used as a valuable fuel. The sulfuric acid immersion experiments were studied for recovering indium from the LCD glass after stripping the polarizing film. Central composite design (CCD) under response surface methodology (RSM) was used to optimize the acid immersion process and the results indicated the indium recovery can be fitted based on the actual value to a polynomial quadratic equation and the temperature was more essential factor than time and acid concentration in the studied ranges. The optimum processing condition was obtained with time 42.2 min, temperature 65.6 °C and acid concentration 0.6 mol/L. Under the optimal conditions, the indium recovery was close to 100%.

  11. Automated optical inspection of liquid crystal display anisotropic conductive film bonding

    Science.gov (United States)

    Ni, Guangming; Du, Xiaohui; Liu, Lin; Zhang, Jing; Liu, Juanxiu; Liu, Yong

    2016-10-01

    Anisotropic conductive film (ACF) bonding is widely used in the liquid crystal display (LCD) industry. It implements circuit connection between screens and flexible printed circuits or integrated circuits. Conductive microspheres in ACF are key factors that influence LCD quality, because the conductive microspheres' quantity and shape deformation rate affect the interconnection resistance. Although this issue has been studied extensively by prior work, quick and accurate methods to inspect the quality of ACF bonding are still missing in the actual production process. We propose a method to inspect ACF bonding effectively by using automated optical inspection. The method has three steps. The first step is that it acquires images of the detection zones using a differential interference contrast (DIC) imaging system. The second step is that it identifies the conductive microspheres and their shape deformation rate using quantitative analysis of the characteristics of the DIC images. The final step is that it inspects ACF bonding using a back propagation trained neural network. The result shows that the miss rate is lower than 0.1%, and the false inspection rate is lower than 0.05%.

  12. Comparison of viewing angle and observer performances in different types of liquid-crystal display monitors.

    Science.gov (United States)

    Hatanaka, Shiro; Morishita, Junji; Hiwasa, Takeshi; Dogomori, Kiyoshi; Toyofuku, Fukai; Ohki, Masafumi; Higashida, Yoshiharu

    2009-07-01

    It is known that the performance of liquid-crystal display (LCD) monitors, such as the luminance and contrast ratio, is dependent on the viewing angle. Our purpose in this study was to compare the angular performance and the effect on observer performance of different types of LCD monitors. The luminance performance and contrast ratio as a function of viewing angle (-60 degrees to 60 degrees) in each direction for two types of LCD monitors, namely, a general-purpose LCD monitor and one especially designed for medical use, were measured in this study. Furthermore, the observer performance at various viewing angles in the horizontal direction for a medical-grade LCD monitor was investigated by eight observers based on a contrast-detail diagram. The two types of LCD monitors showed notable variations in luminance and contrast ratio as a function of the viewing angle. Acceptable viewing angles in terms of the contrast ratio were much smaller in each direction than those for nominal viewing angles in the specifications provided by the manufacturers, and those for the medical-grade LCD monitor in the horizontal and vertical directions were broader than those of the general-purpose LCD monitor. There was no significant difference in observer performance between 0 degrees and 40 degrees. On the other hand, our results showed a statistically significant difference in observer performance between 0 degrees and 60 degrees.

  13. Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

    Science.gov (United States)

    Fujikake, Hideo; Sato, Hiroto; Murashige, Takeshi; Fujisaki, Yoshihide; Kurita, Taiichiro; Furukawa, Tadahiro; Sato, Fumio

    This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.

  14. Assessment of Anisotropic Semiconductor Nanorod and Nanoplatelet Heterostructures with Polarized Emission for Liquid Crystal Display Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, Patrick D.; Souza, João B.; Fedin, Igor; She, Chunxing; Lee, Byeongdu; Talapin, Dmitri V.

    2016-06-28

    Semiconductor nanorods can emit linear-polarized light at efficiencies over 80%. Polarization of light in these systems, confirmed through single-rod spectroscopy, can be explained on the basis of the anisotropy of the transition dipole moment and dielectric confinement effects. Here we report emission polarization in macroscopic semiconductor polymer composite films containing CdSe/CdS nanorods and colloidal CdSe nanoplatelets. Anisotropic nanocrystals dispersed in polymer films of poly butyl-co-isobutyl methacrylate (PBiBMA) can be stretched mechanically in order to obtain unidirectionally aligned arrays. A high degree of alignment, corresponding to an orientation factor of 0.87, was achieved and large areas demonstrated polarized emission, with the contrast ratio I-parallel to/I-perpendicular to= 5.6, making these films viable candidates for use in liquid crystal display (LCD) devices. To some surprise, we observed significant optical anisotropy and emission polarization for 2D CdSe nanoplatelets with the electronic structure of quantum wells. The aligned nanorod arrays serve as optical funnels, absorbing unpolarized light and re-emitting light from deep-green to red with quantum efficiencies over 90% and high degree of linear polarization. Our results conclusively demonstrate the benefits of anisotropic nanostructures for LCD backlighting. The polymer films with aligned CdSe/CdS dot-in-rod and rod-in-rod nanostructures show more than 2-fold enhancement of brightness compared to the emitter layers with randomly oriented nanostructures. This effect can be explained as the combination of linearly polarized luminescence and directional emission from individual nanostructures.

  15. Ice crystal characterization in cirrus clouds: a sun-tracking camera system and automated detection algorithm for halo displays

    Science.gov (United States)

    Forster, Linda; Seefeldner, Meinhard; Wiegner, Matthias; Mayer, Bernhard

    2017-07-01

    Halo displays in the sky contain valuable information about ice crystal shape and orientation: e.g., the 22° halo is produced by randomly oriented hexagonal prisms while parhelia (sundogs) indicate oriented plates. HaloCam, a novel sun-tracking camera system for the automated observation of halo displays is presented. An initial visual evaluation of the frequency of halo displays for the ACCEPT (Analysis of the Composition of Clouds with Extended Polarization Techniques) field campaign from October to mid-November 2014 showed that sundogs were observed more often than 22° halos. Thus, the majority of halo displays was produced by oriented ice crystals. During the campaign about 27 % of the cirrus clouds produced 22° halos, sundogs or upper tangent arcs. To evaluate the HaloCam observations collected from regular measurements in Munich between January 2014 and June 2016, an automated detection algorithm for 22° halos was developed, which can be extended to other halo types as well. This algorithm detected 22° halos about 2 % of the time for this dataset. The frequency of cirrus clouds during this time period was estimated by co-located ceilometer measurements using temperature thresholds of the cloud base. About 25 % of the detected cirrus clouds occurred together with a 22° halo, which implies that these clouds contained a certain fraction of smooth, hexagonal ice crystals. HaloCam observations complemented by radiative transfer simulations and measurements of aerosol and cirrus cloud optical thickness (AOT and COT) provide a possibility to retrieve more detailed information about ice crystal roughness. This paper demonstrates the feasibility of a completely automated method to collect and evaluate a long-term database of halo observations and shows the potential to characterize ice crystal properties.

  16. Ice crystal characterization in cirrus clouds: a sun-tracking camera system and automated detection algorithm for halo displays

    Directory of Open Access Journals (Sweden)

    L. Forster

    2017-07-01

    Full Text Available Halo displays in the sky contain valuable information about ice crystal shape and orientation: e.g., the 22° halo is produced by randomly oriented hexagonal prisms while parhelia (sundogs indicate oriented plates. HaloCam, a novel sun-tracking camera system for the automated observation of halo displays is presented. An initial visual evaluation of the frequency of halo displays for the ACCEPT (Analysis of the Composition of Clouds with Extended Polarization Techniques field campaign from October to mid-November 2014 showed that sundogs were observed more often than 22° halos. Thus, the majority of halo displays was produced by oriented ice crystals. During the campaign about 27 % of the cirrus clouds produced 22° halos, sundogs or upper tangent arcs. To evaluate the HaloCam observations collected from regular measurements in Munich between January 2014 and June 2016, an automated detection algorithm for 22° halos was developed, which can be extended to other halo types as well. This algorithm detected 22° halos about 2 % of the time for this dataset. The frequency of cirrus clouds during this time period was estimated by co-located ceilometer measurements using temperature thresholds of the cloud base. About 25 % of the detected cirrus clouds occurred together with a 22° halo, which implies that these clouds contained a certain fraction of smooth, hexagonal ice crystals. HaloCam observations complemented by radiative transfer simulations and measurements of aerosol and cirrus cloud optical thickness (AOT and COT provide a possibility to retrieve more detailed information about ice crystal roughness. This paper demonstrates the feasibility of a completely automated method to collect and evaluate a long-term database of halo observations and shows the potential to characterize ice crystal properties.

  17. Realization of Field Sequential Color in Simple Matrix Antiferroelectric Liquid Crystal Displays by Utilizing Fast Pretransitional Response

    Science.gov (United States)

    Suzuki, Yasushi; Chen, Guo-Ping; Manna, Uttam; Vij, Jagdish K.; Fukuda, Atsuo

    2009-07-01

    Simple matrix antiferroelectric liquid crystal displays (SM-AFLCDs) are prototyped to realize field sequential color (FSC) by utilizing the fast pretransitional response. The developed FSC-SM-AFLCDs will lead to the replacement of existing static driven FSC-SM-nematic-LCDs. Bright and clear color can be given to already market-acquired, black-and-white SM-LCDs of up to 1/64-duty and 3-in. diagonal size. To optimize the display performance, we analyze two important factors, the large pretransitional effect and the appropriate reset pulse, in terms of the interlayer interaction potential used in describing the field-induced transition of the antiferroelectric smectic phase.

  18. Horizontally-aligned carbon nanotubes arrays and their interactions with liquid crystal molecules: Physical characteristics and display applications

    Directory of Open Access Journals (Sweden)

    Frédérick Roussel

    2012-03-01

    Full Text Available We report on the physical characteristics of horizonthally-grown Single-Walled Carbon Nanotubes (h-al-SWNT arrays and their potential use as transparent and conducting alignment layer for liquid crystals display devices. Microscopy (SEM and AFM, spectroscopic (Raman and electrical investigations demonstrate the strong anisotropy of h-al-SWNT arrays. Optical measurements show that h-al-SWNTs are efficient alignment layers for Liquid Crystal (LC molecules allowing the fabrication of optical wave plates. Interactions between h-al-SWNT arrays and LC molecules are also investigated evidencing the weak azimuthal anchoring energy at the interface, which, in turn, leads to LC devices with a high pretilt angle. The electro-optical reponses of h-al-SWNT/LC cells demonstrate that h-al-SWNT arrays are efficient nanostructured electrodes with potential use for the combined replacement of Indium Tin Oxyde and polymeric alignment layers in conventional displays.

  19. Compact Holographic Projection Display Using Liquid-Crystal-on-Silicon Spatial Light Modulator

    Directory of Open Access Journals (Sweden)

    Wei-Feng Hsu

    2016-09-01

    Full Text Available This paper presents a holographic projection display in which a phase-only spatial light modulator (SLM performs three functions: beam shaping, image display, and speckle reduction. The functions of beam shaping and image display are performed by dividing the SLM window into four sub-windows loaded with different diffractive phase elements (DPEs. The DPEs are calculated using a modified iterative Fourier transform algorithm (IFTA. The function of speckle reduction is performed using temporal integration of display images containing speckles. The speckle contrast ratio of the display image is 0.39 due to the integration of eight speckled images. The system can be extended to display full-color images also by using temporal addition of elementary color images. Because the system configuration needs only an SLM, a Fourier transform lens, and two mirrors, the system volume is very small, becoming a potential candidate for micro projectors.

  20. Biological treatment of thin-film transistor liquid crystal display (TFT-LCD) wastewater.

    Science.gov (United States)

    Lei, C N; Whang, L M; Lin, H L

    2008-01-01

    The amount of pollutants produced during manufacturing processes of TFT-LCD (thin-film transistor liquid crystal display) substantially increases due to an increasing production of the opto-electronic industry in Taiwan. The total amount of wastewater from TFT-LCD manufacturing plants is expected to exceed 200,000 CMD in the near future. Typically, organic solvents used in TFT-LCD manufacturing processes account for more than 33% of the total TFT-LCD wastewater. The main components of these organic solvents are composed of the stripper (dimethyl sulphoxide (DMSO) and monoethanolamine (MEA)), developer (tetra-methyl ammonium hydroxide (TMAH)) and chelating agents. These compounds are recognized as non-or slow-biodegradable organic compounds and little information is available regarding their biological treatability. In this study, the performance of an A/O SBR (anoxic/oxic sequencing batch reactor) treating synthetic TFT-LCD wastewater was evaluated. The long-term experimental results indicated that the A/O SBR was able to achieve stable and satisfactory removal performance for DMSO, MEA and TMAH at influent concentrations of 430, 800, and 190 mg/L, respectively. The removal efficiencies for all three compounds examined were more than 99%. In addition, batch tests were conducted to study the degradation kinetics of DMSO, MEA, and TMAH under aerobic, anoxic, and anaerobic conditions, respectively. The organic substrate of batch tests conducted included 400 mg/L of DMSO, 250 mg/L of MEA, and 120 mg/L of TMAH. For DMSO, specific DMSO degradation rates under aerobic and anoxic conditions were both lower than 4 mg DMSO/g VSS-hr. Under anaerobic conditions, the specific DMSO degradation rate was estimated to be 14 mg DMSO/g VSS-hr, which was much higher than those obtained under aerobic and anoxic conditions. The optimum specific MEA and TMAH degradation rates were obtained under aerobic conditions with values of 26.5 mg MEA/g VSS-hr and 17.3 mg TMAH/g VSS

  1. Flexoelectric effect in an in-plane switching (IPS) liquid crystal cell for low-power consumption display devices

    Science.gov (United States)

    Kim, Min Su; Bos, Philip J.; Kim, Dong-Woo; Yang, Deng-Ke; Lee, Joong Hee; Lee, Seung Hee

    2016-10-01

    Technology of displaying static images in portable displays, advertising panels and price tags pursues significant reduction in power consumption and in product cost. Driving at a low-frequency electric field in fringe-field switching (FFS) mode can be one of the efficient ways to save powers of the recent portable devices, but a serious drop of image-quality, so-called image-flickering, has been found in terms of the coupling of elastic deformation to not only quadratic dielectric effect but linear flexoelectric effect. Despite of the urgent requirement of solving the issue, understanding of such a phenomenon is yet vague. Here, we thoroughly analyze and firstly report the flexoelectric effect in in-plane switching (IPS) liquid crystal cell. The effect takes place on the area above electrodes due to splay and bend deformations of nematic liquid crystal along oblique electric fields, so that the obvious spatial shift of the optical transmittance is experimentally observed and is clearly demonstrated based on the relation between direction of flexoelectric polarization and electric field polarity. In addition, we report that the IPS mode has inherent characteristics to solve the image-flickering issue in the low-power consumption display in terms of the physical property of liquid crystal material and the electrode structure.

  2. Directional backlight liquid crystal autostereoscopic display: technical challenges, research progress, and prospect (Conference Presentation)

    Science.gov (United States)

    Fan, Hang; Li, Kunyang; Zhou, Yangui; Liang, Haowen; Wang, Jiahui; Zhou, Jianying

    2016-09-01

    Recent upsurge on virtual and augmented realities (VR and AR) has re-ignited the interest to the immerse display technology. The VR/AR technology based on stereoscopic display is believed in its early stage as glasses-free, or autostereoscopic display, will be ultimately adopted for the viewing convenience, visual comfort and for the multi-viewer purposes. On the other hand, autostereoscopic display has not yet received positive market response for the past years neither with stereoscopic displays using shutter or polarized glasses. We shall present the analysis on the real-world applications, rigid user demand, the drawbacks to the existing barrier- and lenticular lens-based LCD autostereoscopy. We shall emphasize the emerging autostereoscopic display, and notably on directional backlight LCD technology using a hybrid spatial- and temporal-control scenario. We report the numerical simulation of a display system using Monte-Carlo ray-tracing method with the human retina as the real image receiver. The system performance is optimized using newly developed figure of merit for system design. The reduced crosstalk in an autostereoscopic system, the enhanced display quality, including the high resolution received by the retina, the display homogeneity without Moiré- and defect-pattern, will be highlighted. Recent research progress including a novel scheme for diffraction-free backlight illumination, the expanded viewing zone for autostereoscopic display, and the novel Fresnel lens array to achieve a near perfect display in 2D/3D mode will be introduced. The experimental demonstration will be presented to the autostereoscopic display with the highest resolution, low crosstalk, Moiré- and defect- pattern free.

  3. Profiling of liquid crystal displays with Raman spectroscopy: Preprocessing of spectra.

    NARCIS (Netherlands)

    O. Stanimirovic; H.F.M. Boelens; A.J.G. Mank; H.C.J. Hoefsloot; A.K. Smilde

    2005-01-01

    Raman spectroscopy is applied for characterizing paintable displays. Few other options than Raman spectroscopy exist for doing so because of the liquid nature of functional materials. The challenge is to develop a method that can be used for estimating the composition of a single display cell on the

  4. Projection displays

    Science.gov (United States)

    Chiu, George L.; Yang, Kei H.

    1998-08-01

    Projection display in today's market is dominated by cathode ray tubes (CRTs). Further progress in this mature CRT projector technology will be slow and evolutionary. Liquid crystal based projection displays have gained rapid acceptance in the business market. New technologies are being developed on several fronts: (1) active matrix built from polysilicon or single crystal silicon; (2) electro- optic materials using ferroelectric liquid crystal, polymer dispersed liquid crystals or other liquid crystal modes, (3) micromechanical-based transducers such as digital micromirror devices, and grating light valves, (4) high resolution displays to SXGA and beyond, and (5) high brightness. This article reviews the projection displays from a transducer technology perspective along with a discussion of markets and trends.

  5. Military display market segment: helicopters

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    2004-09-01

    The military display market is analyzed in terms of one of its segments: helicopter displays. Parameters requiring special consideration, to include luminance ranges, contrast ratio, viewing angles, and chromaticity coordinates, are examined. Performance requirements for rotary-wing displays relative to several premier applications are summarized. Display sizes having aggregate defense applications of 5,000 units or greater and having DoD applications across 10 or more platforms, are tabulated. The issue of size commonality is addressed where distribution of active area sizes across helicopter platforms, individually, in groups of two through nine, and ten or greater, is illustrated. Rotary-wing displays are also analyzed by technology, where total quantities of such displays are broken out into CRT, LCD, AMLCD, EM, LED, Incandescent, Plasma and TFEL percentages. Custom, versus Rugged commercial, versus commercial off-the-shelf designs are contrasted. High and low information content designs are identified. Displays for several high-profile military helicopter programs are discussed, to include both technical specifications and program history. The military display market study is summarized with breakouts for the helicopter market segment. Our defense-wide study as of March 2004 has documented 1,015,494 direct view and virtual image displays distributed across 1,181 display sizes and 503 weapon systems. Helicopter displays account for 67,472 displays (just 6.6% of DoD total) and comprise 83 sizes (7.0% of total DoD) in 76 platforms (15.1% of total DoD). Some 47.6% of these rotary-wing applications involve low information content displays comprising just a few characters in one color; however, as per fixed-wing aircraft, the predominant instantiation involves higher information content units capable of showing changeable graphics, color and video.

  6. UV durable colour pigment doped SmA liquid crystal composites for outdoor trans-reflective bi-stable displays

    Science.gov (United States)

    Xu, H.; Davey, A. B.; Crossland, W. A.; Chu, D. P.

    2012-10-01

    High brightness trans-reflective bi-stable displays based on smectic A (SmA) liquid crystals (LCs) can have nearly perfect transparency in the clear state and very high reflection in the scattered state. Because the LC material in use is stable under UV radiation, this kind of displays can stand for strong day-light and therefore be ideal for outdoor applications from e-books to public signage and advertisement. However, the colour application has been limited because the traditional colourants in use are conventional dyes which are lack of UV stability and that their colours are easily photo bleached. Here we present a colour SmA display demonstrator using pigments as colourant. Mixing pigments with SmA LCs and maintain the desirable optical switching performance is not straightforward. We show here how it can be done, including how to obtain fine sized pigment nano-particles, the effects of particle size and size distribution on the display performance. Our optimized pigments/SmA compositions can be driven by a low frequency waveform (~101Hz) to a scattered state to exhibit colour while by a high frequency waveform (~103Hz) to a cleared state showing no colour. Finally, we will present its excellent UV life-time (at least dye composition (~2.4 years). The complex interaction of pigment nano-particles with LC molecules and the resulting effects on the LC electro-optical performances are still to be fully understood. We hope this work will not only demonstrate a new and practical approach for outdoor reflective colour displays but also provide a new material system for fundamental liquid crystal colloid research work.

  7. Panoramic cockpit displays for tactical military cockpits

    Science.gov (United States)

    Fletcher, Mark; Huffman, David

    2010-04-01

    The F-35 Joint Strike Fighter (JSF) incorporates the latest technology for aerial warfighting. To support this aircraft's mission and to provide the pilot with the increased situational awareness needed in today's battlespace, a panoramic AMLCD was developed and is being deployed for the first time. This 20" by 8" display is the largest fielded to date in a tactical fighter. Key system innovations had to be employed to allow this technology to function in this demanding environment. Certain older generation aircraft are now considering incorporating a panoramic display to provide their crews with this level of increased capability. Key design issues that had to be overcome dealt with sunlight readability, vibration resistance, touchscreen operation, and reliability concerns to avoid single-point failures. A completely dual redundant system design had to be employed to ensure that the pilot would always have access to critical mission and flight data.

  8. Wall-shaped electrodes for reducing the operation voltage of polymer-stabilized blue phase liquid crystal displays

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Miyoung; Kim, Min Su; Kang, Byeong Gyun; Kim, Mi-Kyung; Yoon, Sukin; Lee, Seung Hee [Polymer BIN Fusion Research Center, Department of Polymer Nano-Science and Technology, Chonbuk National University, Chonju, Chonbuk 561-756 (Korea, Republic of); Ge Zhibing; Rao Linghui; Gauza, Sebastian; Wu, Shin-Tson, E-mail: lsh1@chonbuk.ac.k, E-mail: swu@creol.ucf.ed [College of Optics and Photonics, University of Central Florida, Orlando, FL 32816 (United States)

    2009-12-07

    Polymer-stabilized blue phase liquid crystal displays based on the Kerr effect are emerging due to their submillisecond response time, wide view and simple fabrication process. However, the conventional in-plane switching device exhibits a relatively high operating voltage because the electric fields are restricted in the vicinity of the electrode surface. To overcome this technical barrier, we propose a partitioned wall-shaped electrode configuration so that the induced birefringence is uniform between electrodes throughout the entire cell gap. Consequently, the operating voltage is reduced by {approx} 2.8x with two transistors. The responsible physical mechanisms are explained.

  9. Development of High-Thrust and Double-Sided Linear Synchronous Motor Module For Liquid Crystal Display Equipment

    Institute of Scientific and Technical Information of China (English)

    Myung-jin; CHUNG; Sang-yeon; HWANG

    2010-01-01

    <正>Recently,there is an increasing requirement for controlling linear motion up to a few hundred of millimeter strokes in the area of the liquid crystal display(LCD) production equipment.The requirements of the motion system for LCD production equipment are high acceleration and high velocity with positioning accuracy.To satisfy these requirements,it has to be designed with the high-thrust force and low velocity ripple.In this work, high-thrust and double-sided linear synchronous motor (LSM)module is proposed and the developed high-thrust and double-sided LSM module is verified by performance test.

  10. Parallel aligned liquid crystal on silicon display based optical set-up for the generation of polarization spatial distributions

    Science.gov (United States)

    Estévez, Irene; Lizana, Angel; Zheng, Xuejie; Peinado, Alba; Ramírez, Claudio; Martínez, Jose Luis; Márquez, Andrés.; Moreno, Ignacio; Campos, Juan

    2015-06-01

    Liquid Crystals on Silicon (LCOS) displays are a type of LCDs that work in reflection. Such devices, due to the double pass that the light beam performs through the LC cells, lead to larger phase modulation than transmissive LCDs with the same thickness. By taking advantage of this modulation capability exhibited by LCOS displays, we propose a new experimental set-up which is able to provide customized state of polarization spatial distributions just by means of a single LCOS display. To this aim, a double reflection on different halves of the display is properly performed. This fact is achieved by including a compact optical system that steers the light and performs a proper polarization plane rotation. The set-up has been experimentally implemented and some experimental concerns are discussed. The suitability of the system is provided by generating different experimental spatial distributions of polarization. In this regard, well-known polarization distributions, as axial, azimuthal or spiral linear polarization patterns are here provided. Based on the excellent results obtained, the suitability of the system to generate different spatially variant distributions of polarization is validated.

  11. EVALUATION OF CHROMATICITY COORDINATES SHIFT FOR IMAGE DISPLAYED ON LIQUID CRYSTAL PANELS WITH VARIOUS PROPERTIES ON COLOR REPRODUCTION

    Directory of Open Access Journals (Sweden)

    I. O. Zharinov

    2016-03-01

    Full Text Available Subject of Research.We consider the problem of evaluation of chromaticity coordinates shift for image displayed on liquid crystal panels with various properties on color reproduction. A mathematical model represents the color reproduction characteristics. The spread of the color characteristics of the screens has a statistical nature. Differences of color reproduction for screens are perceived by the observer in the form of different colors and shades that are displayed on the same type of commercially available screens. Color differences are characterized by numerical measure of the difference of colors and can be mathematically compensated. The solution of accounting problem of the statistical nature of the color characteristics spread for the screens has a particular relevance to aviation instrumentation. Method. Evaluation of chromaticity coordinates shift of the image is based on the application of the Grassmann laws of color mixing.Basic data for quantitative calculation of shift are the profiles of two different liquid crystal panels defined by matrixes of scales for components of primary colors (red, green, blue. The calculation is based on solving the system of equations and calculating the color difference in the XY-plane. In general, the calculation can be performed in other color spaces: UV, Lab. The statistical nature of the spread of the color characteristics for the screens is accounted for in the proposed mathematical model based on the interval setting of coordinate values of the color gamut triangle vertices on the set of commercially available samples. Main Results. Carried outresearches result in the mathematical expressions allowing to recalculate values of chromaticity coordinates of the image displayed on various samples of liquid crystal screens. It is shown that the spread of the color characteristics of the screens follows bivariate normal distribution law with the accuracy sufficient for practice. The results of

  12. Recycling acetic acid from polarizing film of waste liquid crystal display panels by sub/supercritical water treatments.

    Science.gov (United States)

    Wang, Ruixue; Chen, Ya; Xu, Zhenming

    2015-05-19

    Waste liquid crystal display (LCD) panels mainly contain inorganic materials (glass substrate) and organic materials (polarizing film and liquid crystal). The organic materials should be removed first since containing polarizing film and liquid crystal is to the disadvantage of the indium recycling process. In the present study, an efficient and environmentally friendly process to obtain acetic acid from waste LCD panels by sub/supercritical water treatments is investigated. Furthermore, a well-founded reaction mechanism is proposed. Several highlights of this study are summarized as follows: (i) 99.77% of organic matters are removed, which means the present technology is quite efficient to recycle the organic matters; (ii) a yield of 78.23% acetic acid, a quite important fossil energy based chemical product is obtained, which can reduce the consumption of fossil energy for producing acetic acid; (iii) supercritical water acts as an ideal solvent, a requisite reactant as well as an efficient acid-base catalyst, and this is quite significant in accordance with the "Principles of Green Chemistry". In a word, the organic matters of waste LCD panels are recycled without environmental pollution. Meanwhile, this study provides new opportunities for alternating fossil-based chemical products for sustainable development, converting "waste" into "fossil-based chemicals".

  13. Power generating reflective-type liquid crystal displays using a reflective polariser and a polymer solar cell

    Science.gov (United States)

    Ho Huh, Yoon; Park, Byoungchoo

    2015-06-01

    We herein report the results of a study of a power generating reflective-type liquid crystal display (LCD), composed of a 90° twisted nematic (TN) LC cell attached to the top of a light-absorbing polymer solar cell (PSC), i.e., a Solar-LCD. The PSC consisted of a polymer bulk-heterojunction photovoltaic (PV) layer of poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl] and [6,6]-phenyl C71 butyric acid methyl ester (PCDTBT:PCBM70), and showed a high power conversion efficiency of about 5%. In order to improve the visibility of the Solar-LCD, between the TN-LC and the PV cells we inserted a reflective polariser of a giant birefringent optical (GBO) film. The reflectivity from the Solar-LCD was observed to be considerably increased by more than 13-15% under illumination by visible light. The Solar-LCD also exhibited a significantly improved contrast ratio of more than 17-19. We believe there is a clear case for using such Solar-LCDs in new power-generating reflective-type displays; taken as a whole these results also demonstrate the possibility of their application in a number of energy-harvesting opto-electrical display devices.

  14. Integrated light-guide plates that can control the illumination angle for liquid crystal display backlight system

    Science.gov (United States)

    Feng, Di; Yang, Xingpeng; Jin, Guofan; Yan, Yingbai; Fan, Shoushan

    2006-01-01

    Liquid crystal displays (LCDs) with edge-lit backlight systems offer several advantages, such as low energy consuming, low weight, and high uniformity of intensity, over traditional cathode-ray tube displays, and make them ideal for many applications including monitors in notebook personal computers, screens for TV, and many portable information terminals, such as mobile phones, personal digital assistants, etc. To satisfy market requirements for mobile and personal display panels, it is more and more necessary to modify the backlight system and make it thinner, lighter, and brighter all at once. In this paper, we have proposed a new integrated LGP based on periodic and aperiodic microprism structures by using polymethyl methacrylate material, which can be designed to control the illumination angle, and to get high uniformity of intensity. So the backlight system will be simplified to use only light sources and one LGP without using other optical sheets, such as reflection sheet, diffusion sheet and prism sheets. By using optimizing program and ray tracing method, the designed LGPs can achieve a uniformity of intensity better than 86%, and get a peak illumination angle from +400 to -200, without requiring other optical sheets. We have designed a backlight system with only one LED light source and one LGP, and other LGP design examples with different sizes (1.8 inches and 14.1 inches) and different light source (LED or CCFL), are performed also.

  15. Image quality performance of liquid crystal display systems: influence of display resolution, magnification and window settings on contrast-detail detection.

    Science.gov (United States)

    Bacher, Klaus; Smeets, Peter; De Hauwere, An; Voet, Tony; Duyck, Philippe; Verstraete, Koenraad; Thierens, Hubert

    2006-06-01

    The aim of this study was to investigate the combined effects of liquid crystal display (LCD) resolution, image magnification and window/level adjustment on the low-contrast performance in soft-copy image interpretation in digital radiography and digital mammography. In addition, the effect of a new LCD noise reduction mechanism on the low-contrast detectability was studied. Digital radiographs and mammograms of two dedicated contrast-detail phantoms (CDRAD 2.0 and CDMAM 3.4) were scored on five LCD devices with varying resolutions (1-3- and 5-megapixel) and one dedicated 5-megapixel cathode ray tube monitor. Two 5-megapixel LCDs were included. The first one was a standard 5-megapixel LCD and the second had a new (Per Pixel Uniformity) noise reduction mechanism. A multi-variate analysis of variance revealed a significant influence of LCD resolution, image magnification and window/level adjustment on the image quality performance assessed with both the CDRAD 2.0 and the CDMAM 3.4 phantoms. The interactive adjustment of brightness and contrast of digital images did not affect the reading time, whereas magnification to full resolution resulted in a significantly slower soft-copy interpretation. For digital radiography applications, a 3-megapixel LCD is comparable with a 5-megapixel CRT monitor in terms of low-contrast performance as well as in reading time. The use of a 2-megapixel LCD is only warranted when radiographs are analysed in full resolution and when using the interactive window/level adjustment. In digital mammography, a 5-megapixel monitor should be the first choice. In addition, the new PPU noise reduction system in the 5-megapixel LCD devices provides significantly better results for mammography reading as compared to a standard 5-magapixel LCD or CRT. If a 3-megapixel LCD is used in mammography setting, a very time-consuming magnification of the digital mammograms would be necessary.

  16. Image quality performance of liquid crystal display systems: Influence of display resolution, magnification and window settings on contrast-detail detection

    Energy Technology Data Exchange (ETDEWEB)

    Bacher, Klaus [Department of Medical Physics and Radiation Protection, Ghent University, Proeftuinstraat 86, B-9000 Gent (Belgium)]. E-mail: klaus.bacher@ugent.be; Smeets, Peter [Department of Radiology, Ghent University Hospital, De Pintelaan 185, B-9000 Gent (Belgium); De Hauwere, An [Department of Medical Physics and Radiation Protection, Ghent University, Proeftuinstraat 86, B-9000 Gent (Belgium); Voet, Tony [Department of Radiology, Ghent University Hospital, De Pintelaan 185, B-9000 Gent (Belgium); Duyck, Philippe [Department of Radiology, Ghent University Hospital, De Pintelaan 185, B-9000 Gent (Belgium); Verstraete, Koenraad [Department of Radiology, Ghent University Hospital, De Pintelaan 185, B-9000 Gent (Belgium); Thierens, Hubert [Department of Medical Physics and Radiation Protection, Ghent University, Proeftuinstraat 86, B-9000 Gent (Belgium)

    2006-06-15

    The aim of this study was to investigate the combined effects of liquid crystal display (LCD) resolution, image magnification and window/level adjustment on the low-contrast performance in soft-copy image interpretation in digital radiography and digital mammography. In addition, the effect of a new LCD noise reduction mechanism on the low-contrast detectability was studied. Digital radiographs and mammograms of two dedicated contrast-detail phantoms (CDRAD 2.0 and CDMAM 3.4) were scored on five LCD devices with varying resolutions (1-3- and 5-megapixel) and one dedicated 5-megapixel cathode ray tube monitor. Two 5-megapixel LCDs were included. The first one was a standard 5-megapixel LCD and the second had a new (Per Pixel Uniformity) noise reduction mechanism. A multi-variate analysis of variance revealed a significant influence of LCD resolution, image magnification and window/level adjustment on the image quality performance assessed with both the CDRAD 2.0 and the CDMAM 3.4 phantoms. The interactive adjustment of brightness and contrast of digital images did not affect the reading time, whereas magnification to full resolution resulted in a significantly slower soft-copy interpretation. For digital radiography applications, a 3-megapixel LCD is comparable with a 5-megapixel CRT monitor in terms of low-contrast performance as well as in reading time. The use of a 2-megapixel LCD is only warranted when radiographs are analysed in full resolution and when using the interactive window/level adjustment. In digital mammography, a 5-megapixel monitor should be the first choice. In addition, the new PPU noise reduction system in the 5-megapixel LCD devices provides significantly better results for mammography reading as compared to a standard 5-magapixel LCD or CRT. If a 3-megapixel LCD is used in mammography setting, a very time-consuming magnification of the digital mammograms would be necessary.

  17. Direct current electric field assembly of colloidal crystals displaying reversible structural color.

    Science.gov (United States)

    Shah, Aayush A; Ganesan, Mahesh; Jocz, Jennifer; Solomon, Michael J

    2014-08-26

    We report the application of low-voltage direct current (dc) electric fields to self-assemble close-packed colloidal crystals in nonaqueous solvents from colloidal spheres that vary in size from as large as 1.2 μm to as small as 0.1 μm. The assemblies are created rapidly (∼2 min) from an initially low volume fraction colloidal particle suspension using a simple capacitor-like electric field device that applies a steady dc electric voltage. Confocal microscopy is used to observe the ordering that is produced by the assembly method. This spatial evidence for ordering is consistent with the 6-fold diffraction patterns identified by light scattering. Red, green, and blue structural color is observed for the ordered assemblies of colloids with diameters of 0.50, 0.40, and 0.29 μm, respectively, consistent with spectroscopic measurements of reflectance. The diffraction and spectrophotometry results were found to be consistent with the theoretical Bragg's scattering expected for closed-packed crystals. By switching the dc electric field from on to off, we demonstrate reversibility of the structural color response on times scales ∼60 s. The dc electric field assembly method therefore represents a simple method to produce reversible structural color in colloidal soft matter.

  18. Brightness-Luminance Ratio of a Liquid Crystal Display in a Transmission Type

    Science.gov (United States)

    Shimomura, Teruo

    1981-08-01

    A psychological experiment was executed binocularly for a bipartite or a separated field. The viewing subtence was 2° in both fields and the spatial separation in a separated field was 1°. Seven observers adjusted the luminance of a white comparison stimulus to appear equally as bright as a test stimulus of a liquid crystal cell. Red-, green-, blue-color under the tunable birefringence mode were shown as a test stimulus. The ratios of the mean observer in a bipartite field were 1.35± 0.23 for red, 1.20± 0.13 for green, 1.06± 0.13 for blue, and lower than those in a separated field.

  19. Generalized nematohydrodynamic boundary conditions with application to bistable twisted nematic liquid-crystal displays

    KAUST Repository

    Fang, Angbo

    2008-12-08

    Parallel to the highly successful Ericksen-Leslie hydrodynamic theory for the bulk behavior of nematic liquid crystals (NLCs), we derive a set of coupled hydrodynamic boundary conditions to describe the NLC dynamics near NLC-solid interfaces. In our boundary conditions, translational flux (flow slippage) and rotational flux (surface director relaxation) are coupled according to the Onsager variational principle of least energy dissipation. The application of our boundary conditions to the truly bistable π -twist NLC cell reveals a complete picture of the dynamic switching processes. It is found that the thus far overlooked translation-rotation dissipative coupling at solid surfaces can accelerate surface director relaxation and enhance the flow rate. This can be utilized to improve the performance of electro-optical nematic devices by lowering the required switching voltages and reducing the switching times. © 2008 The American Physical Society.

  20. Technological process and optimum design of organic materials vacuum pyrolysis and indium chlorinated separation from waste liquid crystal display panels.

    Science.gov (United States)

    Ma, En; Xu, Zhenming

    2013-12-15

    In this study, a technology process including vacuum pyrolysis and vacuum chlorinated separation was proposed to convert waste liquid crystal display (LCD) panels into useful resources using self-design apparatuses. The suitable pyrolysis temperature and pressure are determined as 300°C and 50 Pa at first. The organic parts of the panels were converted to oil (79.10 wt%) and gas (2.93 wt%). Then the technology of separating indium was optimized by central composite design (CCD) under response surface methodology (RSM). The results indicated the indium recovery ratio was 99.97% when the particle size is less than 0.16 mm, the weight percentage of NH4Cl to glass powder is 50 wt% and temperature is 450°C. The research results show that the organic materials, indium and glass of LCD panel can be recovered during the recovery process efficiently and eco-friendly.

  1. Crystal Structures of Human SIRT[subscript 3] Displaying Substrate-induced Conformational Changes

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Lei; Wei, Wentao; Jiang, Yaobin; Peng, Hao; Cai, Jianhua; Mao, Chen; Dai, Han; Choy, Wendy; Bemis, Jean E.; Jirousek, Michael R.; Milne, Jill C.; Westphal, Christoph H.; Perni, Robert B.; (Viva Biotech); (Medicilon); (GSK)

    2009-11-04

    SIRT3 is a major mitochondrial NAD{sup +}-dependent protein deacetylase playing important roles in regulating mitochondrial metabolism and energy production and has been linked to the beneficial effects of exercise and caloric restriction. SIRT3 is emerging as a potential therapeutic target to treat metabolic and neurological diseases. We report the first sets of crystal structures of human SIRT3, an apo-structure with no substrate, a structure with a peptide containing acetyl lysine of its natural substrate acetyl-CoA synthetase 2, a reaction intermediate structure trapped by a thioacetyl peptide, and a structure with the dethioacetylated peptide bound. These structures provide insights into the conformational changes induced by the two substrates required for the reaction, the acetylated substrate peptide and NAD+. In addition, the binding study by isothermal titration calorimetry suggests that the acetylated peptide is the first substrate to bind to SIRT3, before NAD{sup +}. These structures and biophysical studies provide key insight into the structural and functional relationship of the SIRT3 deacetylation activity.

  2. Multi-wavelength sensitive holographic polymer dispersed liquid crystal grating applied within image splitter for autostereoscopic display

    Science.gov (United States)

    Zheng, Jihong; Wang, Kangni; Gao, Hui; Lu, Feiyue; Sun, Lijia; Zhuang, Songlin

    2016-09-01

    Multi-wavelength sensitive holographic polymer dispersed liquid crystal (H-PDLC) grating and its application within image splitter for autostereoscopic display are reported in this paper. Two initiator systems consisting of photoinitiator, Methylene Blue and coinitiator, p-toluenesulfonic acid as well as photoinitiator, Rose Bengal and coinitiator, Nphenylglycine are employed. We demonstrate that Bragg gratings can be formed in this syrup polymerized under three lasers simultaneously including 632.8nm from He-Ne laser, 532nm from Verdi solid state laser, and 441.6nm from He- Cd laser. The diffraction efficiency of three kinds of gratings with different exposure wavelength are 57%, 75% and 33%, respectively. The threshold driving voltages of those gratings are 2.8, 3.05, and 2.85 V/μm, respectively. We also present the results for the feasibility of this proposed H-PDLC grating applied into image splitter without color dispersion for autostereoscopic display according to experimental splitting effect.

  3. Electrophoresis Gel Quantification with a Flatbed Scanner and Versatile Lighting from a Screen Scavenged from a Liquid Crystal Display (LCD) Monitor

    Science.gov (United States)

    Yeung, Brendan; Ng, Tuck Wah; Tan, Han Yen; Liew, Oi Wah

    2012-01-01

    The use of different types of stains in the quantification of proteins separated on gels using electrophoresis offers the capability of deriving good outcomes in terms of linear dynamic range, sensitivity, and compatibility with specific proteins. An inexpensive, simple, and versatile lighting system based on liquid crystal display backlighting is…

  4. Electrophoresis Gel Quantification with a Flatbed Scanner and Versatile Lighting from a Screen Scavenged from a Liquid Crystal Display (LCD) Monitor

    Science.gov (United States)

    Yeung, Brendan; Ng, Tuck Wah; Tan, Han Yen; Liew, Oi Wah

    2012-01-01

    The use of different types of stains in the quantification of proteins separated on gels using electrophoresis offers the capability of deriving good outcomes in terms of linear dynamic range, sensitivity, and compatibility with specific proteins. An inexpensive, simple, and versatile lighting system based on liquid crystal display backlighting is…

  5. The influence of the conical incidence on the waveguide-type colour-separating backlight for liquid crystal display

    Science.gov (United States)

    Luo, Ji; Wang, Wenfeng

    2011-02-01

    The lightguide assisted by diffraction gratings is used to implement colour-separating backlight for Liquid Crystal Display (LCD). In the configuration, the light incidence angle is required to be a precise designed one. However, the light incidence is conical always. In this paper, by rigorous coupled wave theory, the influence of conical input on the colour-separating backlight is investigated. It shows that, when the azimuthal angle of the light increases, the diffraction efficiency could be enhanced by a factor of 2, which means that the conical input will benefit the diffraction efficiency of the lightguide. However, it also leads to a larger output spot area at the same time, which could result in the mixing of RGB pix. When the azimuthal angle is smaller than 12°, the maximum diffraction angles of RGB light can be completely separated, which means that, with a designed distance or with an assisted micro-lens layer between the grating and the pix layer, the RGB light can reach their corresponding pix. The influence of the conical input on the polarized light is also investigated. The conical input will result in the output with composite polarization, which, in principle, disables the use of polarized light source in LCD.

  6. Exposure to volatile organic compounds and kidney dysfunction in thin film transistor liquid crystal display (TFT-LCD) workers.

    Science.gov (United States)

    Chang, Ta-Yuan; Huang, Kuei-Hung; Liu, Chiu-Shong; Shie, Ruei-Hao; Chao, Keh-Ping; Hsu, Wen-Hsin; Bao, Bo-Ying

    2010-06-15

    Many volatile organic compounds (VOCs) are emitted during the manufacturing of thin film transistor liquid crystal displays (TFT-LCDs), exposure to some of which has been reported to be associated with kidney dysfunction, but whether such an effect exists in TFT-LCD industry workers is unknown. This cross-sectional study aimed to investigate the association between exposure to VOCs and kidney dysfunction among TFT-LCD workers. The results showed that ethanol (1811.0+/-1740.4 ppb), acetone (669.0+/-561.0 ppb), isopropyl alcohol (187.0+/-205.3 ppb) and propylene glycol monomethyl ether acetate (PGMEA) (102.9+/-102.0 ppb) were the four dominant VOCs present in the workplace. The 63 array workers studied had a risk of kidney dysfunction 3.21-fold and 3.84-fold that of 61 cell workers and 18 module workers, respectively. Workers cumulatively exposed to a total level of isopropyl alcohol, PGMEA and propylene glycol monomethyl ether> or =324 ppb-year had a significantly higher risk of kidney dysfunction (adjusted OR=3.41, 95% CI=1.14-10.17) compared with those exposed to LCD industry, and cumulative exposure to specific VOCs might be associated with kidney dysfunction.

  7. Use of thin film transistor liquid crystal display (TFT-LCD) waste glass in the production of ceramic tiles.

    Science.gov (United States)

    Lin, Kae-Long

    2007-09-05

    In this study, we employ the following operating conditions: varied pressure (25 kgf/cm(2)), sintering temperature (900-1200 degrees C), sintering time (6h), percentage of thin film transistor liquid crystal display (TFT-LCD) waste glass by weight (0-50%) and temperature rising at a rate of 5 degrees C/min, to fabricate clay tiles. The sintering characteristics of the clay blended with TFT-LCD waste glass tiles are examined to evaluate the feasibility of the reuse of TFT-LCD waste glass. TFT-LCD waste glass contains large amounts of glass. The TCLP leaching concentrations all met the ROC EPAs current regulatory thresholds. The addition of TFT-LCD waste glass to the mixture, increased the apparent weight loss. The incorporation of 50% TFT-LCD waste glass resulted in a significant increase in the porosity ratio of the specimens compared to the porosity ratio of the ceramic tile containing TFT-LCD waste glass. The main constituent in both the clay tile and the clay with TFT-LCD waste glass samples is quartz. Increasing the temperature resulted in an increase in the flexural strength and resistance to abrasion in the tiles. The porosity ratio decreases as shrinkage increases. The relation between the porosity ratio and the hardness of the tiles used in the study is also shown.

  8. Dendronized Polyimides Bearing Long-Chain Alkyl Groups and Their Application for Vertically Aligned Nematic Liquid Crystal Displays

    Directory of Open Access Journals (Sweden)

    Yusuke Tsuda

    2009-11-01

    Full Text Available Polyimides having dendritic side chains were investigated. The terphenylene diamine monomer having a first-generation monodendron, 3,4,5-tris(n-dodecyloxy-benzoate and the monomer having a second-generation monodendron, 3,4,5-tris[-3’,4’,5’-tri(n-dodecyloxybenzyloxy]benzoate were successfully synthesized and the corresponding soluble dendritic polyimides were obtained by polycondensation with conventional tetracarboxylic dianhydride monomers such as benzophenone tertracarboxylic dianhydride (BTDA. The two-step polymerizations in NMP that is a general method for the synthesis of soluble polyimides is difficult; however, the expected dendritic polyimides can be obtained in aromatic polar solvents such as m-cresol and pyridine. The solubility of these dendoronized polyimides is characteristic; soluble in common organic solvents such as dichloromethane, chloroform, toluene and THF. These dendronized polyimides exhibited high glass transition temperatures and good thermal stability in both air and under nitrogen. Their application as alignment layers for LCDs was investigated, and it was found that these polyimides having dendritic side chains were applicable for the vertically aligned nematic liquid crystal displays (VAN-LCDs.

  9. Fluorescence depolarization and contact angle investigation of dynamic and static interfacial tension of liquid crystal display materials.

    Science.gov (United States)

    Quintella, Cristina M; Lima, Angelo M V; Gonçalves, Cristiane C; Watanabe, Yuji N; Mammana, Alaide P; Schreiner, Marcos A; Pepe, Iuri; Pizzo, Angela A

    2003-06-01

    Interfacial interactions control two processes empirically known to be critical for molecular anchoring in twisted nematic liquid crystal displays technology (TN-LCDs): surface treatment and filling procedure. Static and dynamical interfacial tensions (Gamma(SL)) between liquids and several substrates with similar roughness were observed respectively by contact angle (theta(c)) of sessile drops and by fluorescence depolarization of thin liquid films flowing at high velocity. Gamma(SL) decreased when glass was coated with tin dioxide and increased with polyvinyl alcohol (PVA) deposition. Drops were circular for all substrates except rubbed PVA, where they flowed spontaneously along the rubbing direction, reaching an oblong form that had theta(c) parallel and perpendicular to the rubbing direction respectively greater and smaller than theta(c) for non-rubbed PVA. This is attributed to polar group alignment generating an asymmetric Gamma(SL) distribution with nanometric preferential direction, inducing a capillary-like flow. Polarization and anisotropy maps for high-velocity flow parallel to the PVA rubbing direction showed an increase in the net alignment of molecular domains and a widening of the region where it occurred. This is attributed to preferential anchoring in the downstream direction, instead of in several directions, as for non-rubbed PVA. This explains why filling direction is crucial for TN-LCDs homogeneous behavior.

  10. Optical simulation of in-plane-switching blue phase liquid crystal display using the finite-difference time-domain method

    Science.gov (United States)

    Dou, Hu; Ma, Hongmei; Sun, Yu-Bao

    2016-09-01

    The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display. Compared with the matrix optic methods and the refractive method, the finite-difference time-domain method, which is used to directly solve Maxwell’s equations, can consider the lateral variation of the refractive index and obtain an accurate convergence effect. The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage. The finite-difference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change. Project supported by the National Natural Science Foundation of China (Grant Nos. 11304074, 61475042, and 11274088), the Natural Science Foundation of Hebei Province, China (Grant Nos. A2015202320 and GCC2014048), and the Key Subject Construction Project of Hebei Province University, China.

  11. Chelant-induced reclamation of indium from the spent liquid crystal display panels with the aid of microwave irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, Hiroshi, E-mail: hhiroshi@t.kanazawa-u.ac.jp [Institute of Science and Engineering, Kanazawa University, Kakuma, Kanazawa 920-1192 (Japan); Rahman, Ismail M.M., E-mail: I.M.M.Rahman@gmail.com [Graduate School of Natural Science and Technology, Kanazawa University, Kakuma, Kanazawa 920-1192 (Japan); Department of Applied and Environmental Chemistry, University of Chittagong, Chittagong 4331 (Bangladesh); Egawa, Yuji; Sawai, Hikaru; Begum, Zinnat A. [Graduate School of Natural Science and Technology, Kanazawa University, Kakuma, Kanazawa 920-1192 (Japan); Maki, Teruya [Institute of Science and Engineering, Kanazawa University, Kakuma, Kanazawa 920-1192 (Japan); Mizutani, Satoshi [Graduate School of Engineering, Osaka City University, Sugimoto 3-3-138, Sumiyoshi-Ku, Osaka 558-8585 (Japan)

    2013-06-15

    Highlights: • A new process for indium recovery from end-of-life LCD panels. • Chelants are used for the dissolution of indium from the waste LCD panels. • Indium extraction with chelant is enhanced with the aid of microwave irradiation. • Extraction rate is quantitative in the hyperbaric high-temperature environment. -- Abstract: Indium is a rare metal that is mostly consumed as indium tin oxide (ITO) in the fabrication process of liquid crystal display (LCD) panels. The spent LCD panels, termed as LCD-waste hereafter, is an increasing contributor of electronic waste burden worldwide and can be an impending secondary source of indium. The present work reports a new technique for the reclamation of indium from the unground LCD-waste using aminopolycarboxylate chelants (APCs) as the solvent in a hyperbaric environment and at a high-temperature. Microwave irradiation was used to create the desired system conditions, and a substantial abstraction of indium (≥80%) from the LCD-waste with the APCs (EDTA or NTA) was attained in the acidic pH region (up to pH 5) at the temperature of ≥120 °C and the pressure of ∼50 bar. The unique point of the reported process is the almost quantitative recovery of indium from the LCD-waste that ensured via the combination of the reaction facilitatory effect of microwave exposure and the metal extraction capability of APCs. A method for the selective isolation of indium from the extractant solution and recycle of the chelant in solution is also described.

  12. Leaching of indium from obsolete liquid crystal displays: Comparing grinding with electrical disintegration in context of LCA

    Energy Technology Data Exchange (ETDEWEB)

    Dodbiba, Gjergj, E-mail: dodbiba@sys.t.u-tokyo.ac.jp [Department of System Innovation, Graduate School of Engineering, University of Tokyo (Japan); Nagai, Hiroki; Wang Lipang; Okaya, Katsunori; Fujita, Toyohisa [Department of System Innovation, Graduate School of Engineering, University of Tokyo (Japan)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Two pre-treatment methods, prior to leaching of indium from obsolete LCD modules, were described. Black-Right-Pointing-Pointer Conventional grinding and electrical disintegration have been evaluated and compared in the context of LCA. Black-Right-Pointing-Pointer Experimental data on the leaching capacity for indium and the electricity consumption of equipment were inputted into the LCA model in order to compare the environmental performance of each method. Black-Right-Pointing-Pointer An estimate for the environmental performance was calculated as the sum of six impact categories. Black-Right-Pointing-Pointer Electrical disintegration method outperforms conventional grinding in all impact categories. - Abstract: In order to develop an effective recycling system for obsolete Liquid Crystal Displays (LCDs), which would enable both the leaching of indium (In) and the recovery of a pure glass fraction for recycling, an effective liberation or size-reduction method would be an important pre-treatment step. Therefore, in this study, two different types of liberation methods: (1) conventional grinding, and (2) electrical disintegration have been tested and evaluated in the context of Life Cycle Assessment (LCA). In other words, the above-mentioned methods were compared in order to find out the one that ensures the highest leaching capacity for indium, as well as the lowest environmental burden. One of the main findings of this study was that the electrical disintegration was the most effective liberation method, since it fully liberated the indium containing-layer, ensuring a leaching capacity of 968.5 mg-In/kg-LCD. In turn, the estimate for the environmental burden was approximately five times smaller when compared with the conventional grinding.

  13. High-bandwidth remote flat panel display interconnect system

    Science.gov (United States)

    Peterson, Darrel G.

    1999-08-01

    High performance electronic displays (CRT, AMLCD, TFEL, plasma, etc.) require wide bandwidth electrical drive signals to produce the desired display images. When the image generation and/or image processing circuitry is located within the same line replaceable unit (LRU) as the display media, the transmission of the display drive signals to the display media presents no unusual design problems. However, many aircraft cockpits are severely constrained for available space behind the instrument panel. This often forces the system designer to specify that only the display media and its immediate support circuitry are to be mounted in the instrument panel. A wide bandwidth interconnect system is then required to transfer image data from the display generation circuitry to the display unit. Image data transfer rates of nearly 1.5 Gbits/second may be required when displaying full motion video at a 60 Hz field rate. In addition to wide bandwidth, this interconnect system must exhibit several additional key characteristics: (1) Lossless transmission of image data; (2) High reliability and high integrity; (3) Ease of installation and field maintenance; (4) High immunity to HIRF and electrical noise; (5) Low EMI emissions; (6) Long term supportability; and (7) Low acquisition and maintenance cost. Rockwell Collins has developed an avionics grade remote display interconnect system based on the American National Standards Institute Fibre Channel standard which meets these requirements. Readily available low cost commercial off the shelf (COTS) components are utilized, and qualification tests have confirmed system performance.

  14. Design of 1-μm-pitch liquid crystal spatial light modulators having dielectric shield wall structure for holographic display with wide field of view

    Science.gov (United States)

    Isomae, Yoshitomo; Shibata, Yosei; Ishinabe, Takahiro; Fujikake, Hideo

    2017-03-01

    In the development of electronic holographic displays with a wide field of view, one issue is the realization of 1-μm-pitch spatial light modulators (SLMs) using liquid crystal on silicon (LCOS) techniques. We clarified that it is necessary to suppress not only the leakage of fringe electric fields from adjacent pixels but also the effect of elastic forces in the liquid crystal to achieve full-phase modulation (2π) in individual pixels. We proposed a novel LCOS-SLM with a dielectric shield wall structure, and achieved driving of individual 1-μm-pitch pixels. We also investigated the optimum values for width and dielectric constant of the wall structure when enlarging the area that can modulate light in the pixels. These results contribute to the design of 1-μm-pitch LCOS-SLM devices for wide-viewing-angle holographic displays.

  15. Optimize the modulation response of twisted-nematic liquid crystal displays as pure phase spatial light modulators

    Science.gov (United States)

    Ma, Baiheng; Peng, Fei; Kang, Mingwu; Zhou, Jiawu

    2014-11-01

    Twisted-nematic liquid crystal displays (TN-LCD) are widely used in numerous research fields of optics working as spatial light modulators. Approaches to obtaining desired intensity or phase modulation by TN-LCD have been extensively studied based on the knowledge of TN-LCD's internal structure parameters, e.g., the orientation of LC molecules at the surfaces, the twist angle, the thickness of the LC layer, and the birefringence of the material. Generally TN-LCD placed between two linear polarizers (P) produces coupled intensity and phase modulation. To obtain the commonly used pure phase modulation, quarter wave plates (QWP) are often used in front of and/or behind the LCD. In this paper, we present a method to optimize the optical modulation properties of the TN-LCD to obtain pure phase modulation in the configuration of P-QWP-LCD-QWP-P each with proper orientation. Firstly an improved method for determining the Jones matrix of the TN-LCD without knowing its internal parameters is presented, which is based on the macroscopical Jones matrix descriptions for TN-LCD, linear polarizer and QWP. Only three sets of intensity measurements are needed for the complete determination of the TN-LCD's Jones matrix for a single wavelength. Then Jones matrix calculations are carried out to determine the orientations of the polarizers and QWPs for pure phase modulation response. In addition, we prove that the phase modulation depth (PMD) of the TN-LCD can be further increased provided that the mean intensity transmission is decreased to a lower level, which is very useful when the TN-LCD is used as a phase modulator and the ratio between the intensities of the desired diffracted order relative to the other diffracted orders is required higher. Experimental results coincide well with the optical modulation properties of the TN-LCD predicted by our determined Jones matrix. In contrast to the traditional method which requires knowledge of the TN-LCD's internal structure parameters

  16. Identification of Text and Symbols on a Liquid Crystal Display Part I: Characterisation of the Luminance, Temporal and Spectral Characteristics

    Science.gov (United States)

    2009-02-01

    Association of Physicists in Medicine set up the AAPM Task Group 18 to establish standards for medical displays, and this group recommended that luminance...Using CRT-Generated Stimuli. Color Research and Application, 24(3), 164-176. TG18, A. (2005). AAPM On-Line Report No. 03. Assessment of Display...for Medical Imaging Systems: Executive Summary of AAPM TG18 Report. Medical Physics, 32(4), 1205-1225. 29 DSTO-TN-0770 30 Appendix A

  17. Reduced operating voltage and grey-to-grey response time in a vertically aligned liquid crystal display using a mixture of two polyimide alignment materials

    Science.gov (United States)

    Lee, Ji-Hoon; Choi, Young Eun; Lee, Jun Hee; Lee, Byeong Hoon; Song, Won Il; Jeong, Kwang-Un; Lee, Gi-Dong; Lee, Seung Hee

    2013-12-01

    We proposed a method to reduce the operating voltage and the grey-to-grey switching time of a vertically aligned liquid crystal display using a mixture of planar and vertical polyimide alignment materials. The surface anchoring energy of the two-polyimide mixture was smaller than that of the pure vertical polyimide and consequently, liquid crystal molecules were easily switched to a planar state with an electric field, resulting in a greater maximum retardation than that of the pure polyimide at the same applied voltage. Rising time was also significantly reduced due to the suppressed optical bouncing effect in the mixed planar polyimide, and the decaying time showed negligible change. With the proposed approach, we can reduce the cell gap to obtain half-wave retardation allowing for faster response time while keeping a low operating voltage.

  18. 基于液晶空间光调制器的全息显示∗%Holographic display based on liquid crystal spatial light mo dulator

    Institute of Scientific and Technical Information of China (English)

    夏军; 常琛亮; 雷威

    2015-01-01

    In conventional phase-only holographic display, the phase-only computer generated hologram is usually calculated based on the fast Fourier transform (FFT) algorithm, in which the Nyquist theory should be satisfied. However, due to the pixel structure of the liquid crystal spatial light modulator and a fixed spatial sampling rate, the size of the reconstructed image is limited by the space-bandwidth product of the liquid crystal phase modulator. The traditional solution is to use convolution algorithm or double-step Fresnel diffraction algorithm to calculate the Fresnel hologram, but FFT has to be calculated many times in both of the methods, thereby increasing the burden of hologram computation. Therefore, in this paper we propose a method to calculate the phase-only hologram based on setting a virtual hologram plane. This virtual hologram plane is set based on the principle of lens imaging. So the calculation of the hologram can be divided into two steps: the first step is to calculate the Fresnel diffraction from the object plane to the virtual hologram plane, and the second step is to calculate the hologram from the virtual hologram plane by being multiplied with a quadratic phase term. In this way, the hologram can be calculated from the original object with any sampling rate we need by adjusting the corresponding parameters of distance. By this method one can calculate the Fresnel diffraction between hologram plane and object plane with variable sampling rates, without considering the space-bandwidth product of the liquid crystal phase modulator, and this algorithm uses only one FFT calculation, which can speed up the calculation of hologram compared with the convolution based method (using three FFTs in calculation) and the double-step Fresnel method (using two FFTs in calculation). Both the computer simulation and the optical experiments demonstrate that the object can be reconstructed with different sizes in the holographic display system. In the optical

  19. WE-D-204-02: Novel Method for Correcting Degradation of Sharpness of Liquid-Crystal Display Based On Modulation Transfer Function

    Energy Technology Data Exchange (ETDEWEB)

    Tokurei, S [Department of Health Sciences, Graduate School of Medical Sciences, Kyushu University, Fukuoka, Fukuoka (Japan); Department of Radiology, Yamaguchi University Hospital, Ube, Yamaguchi (Japan); Morishita, J; Yabuuchi, H [Department of Health Sciences, Faculty of Medical Sciences, Kyushu Universi, Fukuoka, Fukuoka (Japan); Shiotsuki, K [Department of Health Sciences, Graduate School of Medical Sciences, Kyushu University, Fukuoka, Fukuoka (Japan); Bamba, Y; Ogaki, M; Kita, M [Eizo Corporation, Hakusan, Ishikawa (Japan)

    2015-06-15

    Purpose: To develop a method for improving sharpness of images reproduced on liquid-crystal displays (LCDs) by compensating for the degradation of modulation transfer function (MTF) of the LCD. Methods: The inherent MTF of a color LCD (display MTF) was measured using a commercially available color digital camera. The frequency responses necessary to compensate for the resolution property of the LCD were calculated from the inverses of the display MTFs in both the horizontal and vertical directions. In addition, the inverses of the display MTFs were combined with the response of the human eye. The finite impulse response (FIR) filters were computed by taking the inverse Fourier transform of the frequency responses, and the effects of the FIR filtering on both the resolution and noise properties of the displayed images were verified by measuring the MTF and Wiener spectrum (WS), respectively. The FIR filtering was then applied to the representation of digital bone and chest radiographs. Results: The FIR filtering improved the MTF values by up to almost 1.0 or greater over the frequency range of interest, while it minimally increased the WS values. Combining the inverses of the display MTFs with the response of the human eye led to further refinement of the MTF. Our method was successfully and beneficially applied to the image interpretation of bone radiographs. The resolution enhancement of chest radiographs, which include larger scattered radiation than bone radiographs, was easily perceived by incorporating the response of the human eye. In addition, no artifacts were observed on the processed images. Conclusion: Our proposed method to compensate for the degradation of the resolution properties of LCDs has the potential to improve the observer performance of radiologists when reading digital radiographs. This work was supported in part by grant from EIZO Corporation.

  20. Introducing large color displays in the Gripen fighter

    Science.gov (United States)

    Sundgren, Mats; Brandtberg, Hans

    1998-09-01

    Cockpit design is about communication between the aircraft system and the pilot. The information available on-board is very large and increases with on-going development of the systems. New functions for integration and fusion will, together with decision support and automation, set requirements on the displays to transfer information to the pilot. Information overload, mental workload and flight safety are always important areas to put efforts in. The present version of the Swedish JAS 39 Gripen aircraft has three monochrome multi-function displays. The displays are fairly large for a small aircraft, 5' X 6', giving a good situation awareness for the pilot. A new version of the Gripen cockpit featuring large color displays is now under development and will be introduced to the Swedish air force and ready for export market in the end of 2001. Display size, resolution, graphics capability and color have great impact on the pilots ability to acquire and understand the presented information. These factors are very important when designing an improved cockpit. By utilizing the most modern flat panel AMLCD techniques we have succeeded in integrating three 6.2' X 8.3' full-color multi-function displays in the Gripen aircraft.

  1. Handbook of display technology

    CERN Document Server

    Castellano, Joseph A

    1992-01-01

    This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display tech

  2. A comparison of the suitability of cathode ray tube (CRT) and liquid crystal display (LCD) monitors as visual stimulators in mfERG diagnostics.

    Science.gov (United States)

    Kaltwasser, Christoph; Horn, Folkert K; Kremers, Jan; Juenemann, Anselm

    2009-06-01

    The aim of this study was to determine up to which extent the specific characteristics of cathode ray tube (CRT) and liquid crystal display (LCD) monitors influence the retinal biosignal when used as stimulators in ocular electrophysiology. In a conventional CRT monitor, each pixel lights up only for a duration of a few milliseconds during each frame. In contrast, liquid crystal displays are quasi-static, i.e. each pixel has a constant luminance during the whole length of the frame, but lights up only with a certain delay after the trigger. These different display characteristics may affect the mfERG signal. The temporal and spatial luminance distributions of a CRT and an LCD monitor were measured in white flashes. The total amount of emitted light was calculated by integration of the intensity versus time curves. By means of an mfERG recording system (RETIsystem, Roland Consult, Brandenburg, Germany) first-order kernel (FOK) mfERG signals were computed and then analysed using customized MATLAB (TheMathWorks, Natick, MA, USA) software. With the two stimulator monitors, differences in the mfERG signal were observed. The latencies of mfERG responses recorded with the LCD monitor were significantly increased by 7.1 ms for N1 and 9.5 ms for P1 compared to the CRT. Due to a higher luminance, the N1 amplitude was significantly higher by approx. 2 dB in measurements with the LCD monitor while no significant difference could be detected with regard to the more contrast sensitive P1 amplitude. When using LCD monitors as stimulators the increase in latencies and differences in the luminance versus time profile must be taken into account. Prior to clinical application, the establishment of guidelines for the use of LCD monitors is recommended.

  3. [Evaluation of image quality using the normalized-rank approach for primary class liquid-crystal display (LCD) monitors with different colors and resolution].

    Science.gov (United States)

    Kuroki, Hidefumi; Katayama, Reiji; Sakaguchi, Taro; Maeda, Takashi; Morishita, Junji; Hayabuchi, Naofumi

    2010-11-20

    The purposes of this study were to evaluate the image quality of five types of liquid-crystal display (LCD) monitors by utilizing the normalized-rank approach and to investigate the effect of LCD monitor specifications, such as display colors, luminance, and resolution, on the evaluators' ranking. The LCD monitors used in this study were 2, 3 and 5 mega-pixel monochrome LCD monitors, and 2 and 3 mega-pixel color LCD monitors (Eizo Nanao Corporation). All LCD monitors were calibrated to the grayscale standard display function (GSDF) with different maximum luminance (recommended luminance) settings. Also, four kinds of radiographs were used for observer study based on the normalized-rank approach: three adult chest radiographs, three pediatric chest radiographs, three ankle joint radiographs, and four double-contrasted upper gastrointestinal radiographs. Ten radiological technologists participated in the observer study. Monochrome LCD monitors exhibited superior ranking with statistically significant differences (pLCD monitors in all kinds of radiographs. The major difference between monochrome and color monitors was luminance. Therefore, it is considered that the luminance of LCD monitors affects observers' evaluations based on image quality. Moreover, in the case of radiographs that include high frequency image components, the monitor resolution also affects the evaluation. In clinical practice, it is necessary to optimize the luminance and choose appropriate LCD monitors for diagnostic images.

  4. A FPGA-Based Integrated Controller for Liquid Crystal Display%基于FPGA的液晶控制器设计

    Institute of Scientific and Technical Information of China (English)

    汪金辉; 张健; 宫娜; 吴武臣; 董利民

    2008-01-01

    介绍了一种基于 FPGA 的集成液晶控制器.系统由显示模块和控制模块组成,显示模块(LEM101)为10 bit 多功能通用型器件,内含看门狗(WDT)/时钟发生器,2 种频率的蜂鸣驱动电路,内置显示RAM,及3-4线串行接口.控制器基于1.5万门 FPGA 芯片(Xilinx XC3S1500),易于扩展和升级.利用 Verilog 语言,在 FPGA 芯片中实现了控制模块的设计,通过 GR-XC3S-1500 开发板验证,本设计完全满足对液晶模块的控制要求,并成功应用于光栅测量显示控制系统中.控制模块由四部分组成:存储、译码、串并转换器、输出控制.文章讨论了设计方法和设计过程,给出了部分 Verilog 代码.此外,本设计还创造性地在电源和 FPGA 芯片间插入低成本元件,满足了液晶上电后,初始化命令的延迟要求,从而节约了 FPGA 的硬件资源.%This paper presents a FPGA-based integrated controller for liquid crystal display system. The system consists of a display module and a controlling module. The former (LCM101 chip) is 10 bit multi-functional device with a WDT(watch dog timer), a dual frequency driving circuit, a display RAM and seri-al interface. The later is an integrated display controller using a FPGA chip of 1. 5million gate (Xilinx XC3S1500), so being easy to extend and upgrade. Integrated controller design in FPGA chip has been im-plemented by using Verilog language coding and verified in Xilinx Development Board. The design fits the requirements to control liquid crystal display entirely, and is successfully applied in a grating measurement system. The controller module includes four parts: storage, decoding, serial-parallel interface translation,and output controlling. This paper discusses the design method and the design process of each part above,providing Verilog codes partly. What's more a low-cost accessory is originally located between FPGA chip and power supply in hardware design to satisfy delay after liquid crystal electrify

  5. Effect of spatial noise of medical grade Liquid Crystal Displays (LCD) on the detection of micro-calcification

    Science.gov (United States)

    Roehrig, Hans; Fan, Jiahua; Dallas, William J.; Krupinski, Elizabeth A.; Johnson, Jeffrey

    2009-08-01

    This presentation describes work in progress that is the result of an NIH SBIR Phase 1 project that addresses the wide- spread concern for the large number of breast-cancers and cancer victims [1,2]. The primary goal of the project is to increase the detection rate of microcalcifications as a result of the decrease of spatial noise of the LCDs used to display the mammograms [3,4]. Noise reduction is to be accomplished with the aid of a high performance CCD camera and subsequent application of local-mean equalization and error diffusion [5,6]. A second goal of the project is the actual detection of breast cancer. Contrary to the approach to mammography, where the mammograms typically have a pixel matrix of approximately 1900 x 2300 pixels, otherwise known as FFDM or Full-Field Digital Mammograms, we will only use sections of mammograms with a pixel matrix of 256 x 256 pixels. This is because at this time, reduction of spatial noise on an LCD can only be done on relatively small areas like 256 x 256 pixels. In addition, judging the efficacy for detection of breast cancer will be done using two methods: One is a conventional ROC study [7], the other is a vision model developed over several years starting at the Sarnoff Research Center and continuing at the Siemens Corporate Research in Princeton NJ [8].

  6. Vortex beam generation and other advanced optics experiments reproduced with a twisted-nematic liquid-crystal display with limited phase modulation

    Science.gov (United States)

    Cofré, Aaron; García-Martínez, Pascuala; Vargas, Asticio; Moreno, Ignacio

    2017-01-01

    In this work we propose the use of twisted-nematic liquid-crystal spatial light modulators (TN-LC-SLM) as a useful tool for training students in the manipulation of light beams with phase-only masks. In particular, we focus the work on the realization of phase-only gratings and phase-only spiral phases for the generation of vortex beams, beams carrying orbital angular momentum (OAM). Despite the extensive activity in this field, its experimental implementation for educational purposes is limited because it requires the use of very expensive high-resolution liquid-crystal on silicon (LCOS) SLMs. Here, we show that a low-cost experimental implementation can be done with older TNLC technology. However, these devices, intended for display applications, exhibit rather limited optical phase modulation properties in comparison with modern LCOS devices, such as a very low range of phase modulation and a general coupled intensity modulation. However, we show that a precise characterization of their retardance parameters permits their operation in useful modulation configurations. As examples, we include one continuous phase-only configuration useful for reproducing the optimal triplicator phase grating, and a binary π-phase modulation. We include experiments with the realization of different phase diffraction gratings, and their combination with spiral phase patterns and lens functions to generate a variety of vortex beams.

  7. OLED displays and lighting

    CERN Document Server

    Koden, Mitsuhiro

    2017-01-01

    Organic light-emitting diodes (OLEDs) have emerged as the leading technology for the new display and lighting market. OLEDs are solid-state devices composed of thin films of organic molecules that create light with the application of electricity. OLEDs can provide brighter, crisper displays on electronic devices and use less power than conventional light-emitting diodes (LEDs) or liquid crystal displays (LCDs) used today. This book covers both the fundamentals and practical applications of flat and flexible OLEDs.

  8. The influence of liquid crystal display monitors on observer performance for the detection of interstitial lung markings on both storage phosphor and flat-panel-detector chest radiography

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Yon Mi [Department of Radiology and Center for Imaging Science, Samsung Medical Center, Sungkyunkwan University School of Medicine, 50, Ilwon-dong, Kangnam-ku, Seoul 135-710 (Korea, Republic of); Department of Radiology, Gachon University Gil Hospital, 1198, Guwol-dong, Namdong-gu, Incheon 405-760 (Korea, Republic of); Chung, Myung Jin [Department of Radiology and Center for Imaging Science, Samsung Medical Center, Sungkyunkwan University School of Medicine, 50, Ilwon-dong, Kangnam-ku, Seoul 135-710 (Korea, Republic of)], E-mail: mj1.chung@samsung.com; Lee, Kyung Soo [Department of Radiology and Center for Imaging Science, Samsung Medical Center, Sungkyunkwan University School of Medicine, 50, Ilwon-dong, Kangnam-ku, Seoul 135-710 (Korea, Republic of); Choe, Bong-Keun [Department of Preventive Medicine, School of Medicine, Kyunghee University, Seoul (Korea, Republic of)

    2010-04-15

    Purpose: To compare observer performance with a flat-panel liquid crystal display (LCD) monitor and with a high-resolution gray-scale cathode ray tube (CRT) monitor in the detection of interstitial lung markings using a silicon flat-panel-detector direct radiography (DR) and storage phosphor computed radiography (CR) in a clinical setting. Materials and methods: We displayed 39 sets of posteroanterior chest radiographs from the patients who were suspected of interstitial lung disease. Each sets consisted of DR, CR and thin-section CT as the reference standard. Image identities were masked, randomly sorted, and displayed on both five mega pixel (2048 x 2560 x 8 bits) LCD and CRT monitors. Ten radiologists independently rated their confidence in detection for the presence of linear opacities in the four fields of the lungs; right upper, left upper, right lower, and left lower quadrant. Performance of a total 6240 (39 sets x 2 detector systems x 2 monitor system x 4 fields x 10 observers) observations was analyzed by multi-reader multi-case receiver operating characteristic (ROC) analysis. Differences between monitor systems in combinations of detector systems were compared using ANOVA and paired-samples t-test. Results: Area under curves (AUC) for the presence of linear opacities measured by ROC analysis was higher on the LCDs than CRTs without statistical significance (p = 0.082). AUC was significantly higher on the DR systems than CR systems (p = 0.006). AUC was significantly higher on the LCDs than CRTs for DR systems (p = 0.039) but not different for CR systems (p = 0.301). Conclusion: In clinical conditions, performance of the LCD monitor appears to be better for detecting interstitial lung markings when interfaced with DR systems.

  9. Biological treatment of thin-film transistor liquid crystal display (TFT-LCD) wastewater using aerobic and anoxic/oxic sequencing batch reactors.

    Science.gov (United States)

    Lei, Chin-Nan; Whang, Liang-Ming; Chen, Po-Chun

    2010-09-01

    The amount of pollutants produced during manufacturing processes of thin-film transistor liquid crystal display (TFT-LCD) substantially increases due to an increasing production of the opto-electronic industry in Taiwan. This study presents the treatment performance of one aerobic and one anoxic/oxic (A/O) sequencing batch reactors (SBRs) treating synthetic TFT-LCD wastewater containing dimethyl sulfoxide (DMSO), monoethanolamine (MEA), and tetra-methyl ammonium hydroxide (TMAH). The long-term monitoring results for the aerobic and A/O SBRs demonstrate that stable biodegradation of DMSO, MEA, and TMAH can be achieved without any considerably adverse impacts. The ammonium released during MEA and TMAH degradation can also be completely oxidized to nitrate through nitrification in both SBRs. Batch studies on biodegradation rates for DMSO, MEA, and TMAH under anaerobic, anoxic, and aerobic conditions indicate that effective MEA degradation can be easily achieved under all three conditions examined, while efficient DMSO and TMAH degradation can be attained only under anaerobic and aerobic conditions, respectively. The potential odor problem caused by the formation of malodorous dimethyl sulfide from DMSO degradation under anaerobic conditions, however, requires insightful consideration in treating DMSO-containing wastewater.

  10. Mesoporous silica nanoparticles synthesized from liquid crystal display manufacturing extracts as a potential candidate for a drug delivery carrier: evaluation of their safety and biocompatibility

    Directory of Open Access Journals (Sweden)

    Lin YC

    2013-10-01

    Full Text Available Yu-Chih Lin,1 Liang-Yi Lin,2 Ming-Yi Gao,3 Yi-Ping Fang31Department of Environmental Engineering and Health, Yuanpei University, 2Institute of Environmental Engineering, National Chiao Tung University, 3Department of Biotechnology, Yuanpei University, Hsinchu, TaiwanAbstract: Mesoporous silica nanoparticles (MSNs were synthesized as a promising drug delivery carrier due to the large surface area and porous characteristics. Our previous study successfully recycled wastes from the liquid crystal display (LCD industry as the silica precursor. In this study, we substantiated the possibility of applying this material as a drug carrier. MSNs synthesized from the extraction of wastes from the manufacture of LCD panels were characterized as having an average diameter of 100 nm, a surface area of 788 m2/g, a uniform pore size distribution of 3.8 nm, and a pore volume of up to 1.04 cm3/g. Methotrexate and camptothecin were entrapped in MSNs at about 33.88% and 75.12%, respectively. The cell viability assay demonstrated that MSNs at 1 µg/mL had no significant influence on human lung fibroblast (WI-38 cells or ovarian cancer (ES-2 cells. A lactate dehydrogenase assay also indicated no inflammation occurred. Moreover, a hemolytic erythrocyte test indicated that the dose range of <100 µg/mL showed that 5% of erythrocytes were affected. After exposure to biofluids, the ordered structure was slightly degraded. The results revealed that MSNs synthesized from extraction of wastes from the manufacture of LCD panels had a good entrapment capacity for hydrophobic drugs and controllable safety conditions; they may be applied as a drug delivery carrier.Keywords: mesoporous silica nanoparticles (MSNs, waste recycle, drug delivery carrier, safety, biocompatibility

  11. Evaluation of display technologies for Internet of Things (IoT)

    Science.gov (United States)

    Sabo, Julia; Fegert, Tobias; Cisowski, Matthäus Stephanus; Marsal, Anatolij; Eichberger, Domenik; Blankenbach, Karlheinz

    2017-02-01

    Internet of Things (IoT) is a booming industry. We investigated several (semi-) professional IoT devices in combination with displays (focus on reflective technologies) and LEDs. First, these displays were compared for reflectance and ambient light performance. Two measurement set-ups with diffuse conditions were used for simulating typical indoor lighting conditions of IoT displays. E-paper displays were evaluated best as they combine a relative high reflectance with large contrast ratio. Reflective monochrome LCDs show a lower reflectance but are widely available. Second we studied IoT microprocessors interfaces to displays. A µP can drive single LEDs and one or two Seg 8 LED digits directly by GPIOs. Other display technologies require display controllers with a parallel or serial interface to the microprocessor as they need dedicated waveforms for driving the pixels. Most suitable are display modules with built-in display RAM as only pixel data have to be transferred which changes. A HDMI output (e.g. Raspberry Pi) results in high cost for the displays, therefore AMLCDs are not suitable for low to medium cost IoT systems. We compared and evaluated furthermore status indicators, icons, text and graphics IoT display systems regarding human machine interface (HMI) characteristics and effectiveness as well as power consumption. We found out that low resolution graphics bistable e-paper displays are the most appropriate display technology for IoT systems as they show as well information after a power failure or power switch off during maintenance or e.g. QR codes for installation. LED indicators are the most cost effective approach which has however very limited HMI capabilities.

  12. JAVA Stereo Display Toolkit

    Science.gov (United States)

    Edmonds, Karina

    2008-01-01

    This toolkit provides a common interface for displaying graphical user interface (GUI) components in stereo using either specialized stereo display hardware (e.g., liquid crystal shutter or polarized glasses) or anaglyph display (red/blue glasses) on standard workstation displays. An application using this toolkit will work without modification in either environment, allowing stereo software to reach a wider audience without sacrificing high-quality display on dedicated hardware. The toolkit is written in Java for use with the Swing GUI Toolkit and has cross-platform compatibility. It hooks into the graphics system, allowing any standard Swing component to be displayed in stereo. It uses the OpenGL graphics library to control the stereo hardware and to perform the rendering. It also supports anaglyph and special stereo hardware using the same API (application-program interface), and has the ability to simulate color stereo in anaglyph mode by combining the red band of the left image with the green/blue bands of the right image. This is a low-level toolkit that accomplishes simply the display of components (including the JadeDisplay image display component). It does not include higher-level functions such as disparity adjustment, 3D cursor, or overlays all of which can be built using this toolkit.

  13. 多层液晶显示:真正具有深度的显示器

    Institute of Scientific and Technical Information of China (English)

    Steven Smith

    2004-01-01

      Multi-Layer Display(MLD)代表了LCD监视器的新生一代,它的制作是将AMLCD(active matrixliquid crystal displays,有源液晶显示器)单元叠放在一起,并置于一个外壳内.……

  14. Latest development of display technologies

    Science.gov (United States)

    Gao, Hong-Yue; Yao, Qiu-Xiang; Liu, Pan; Zheng, Zhi-Qiang; Liu, Ji-Cheng; Zheng, Hua-Dong; Zeng, Chao; Yu, Ying-Jie; Sun, Tao; Zeng, Zhen-Xiang

    2016-09-01

    In this review we will focus on recent progress in the field of two-dimensional (2D) and three-dimensional (3D) display technologies. We present the current display materials and their applications, including organic light-emitting diodes (OLEDs), flexible OLEDs quantum dot light emitting diodes (QLEDs), active-matrix organic light emitting diodes (AMOLEDs), electronic paper (E-paper), curved displays, stereoscopic 3D displays, volumetric 3D displays, light field 3D displays, and holographic 3D displays. Conventional 2D display devices, such as liquid crystal devices (LCDs) often result in ambiguity in high-dimensional data images because of lacking true depth information. This review thus provides a detailed description of 3D display technologies.

  15. 基于柱面光栅的液晶三维自由立体显示%3D Autostereoscopic Liquid Crystal Display Based on Lenticular Lens

    Institute of Scientific and Technical Information of China (English)

    王琼华; 陶宇虹; 李大海; 赵仁亮; 赵悟翔

    2008-01-01

    根据双目视差原理和柱面光栅的分光特性研制了液晶三维自由立体显示器.该立体显示器由二维平板液晶显示器和柱面光栅有机耦合而成.采用九个视差图实现了三维静态、动态和视频的显示效果.一个19英寸的立体显示器具有相对应的平面显示器相同的亮度、对比度和色彩,其分辨率在垂直和水平方向都有合理的下降.该立体显示器的观看距离是(1000±500)mm,视角为 90°,可供多人不戴立体眼镜就能自由观看立体图像.%According to binocular parallax and the optical property of lenticular lens, a three-dimension (3D) au-tostereoscopic liquid crystal display was developed. The display is composed of a two-dimension (2D) fiat liquid crystal display and a lenticular lens sheet. Nine views are used to realize the display of 3D static, animation and video images. A 19-inch 3D monitor prototype presents the same brightness, contrast ratio and color as those of the corresponding 2D display. Only the resolution reduces on both the horizontal and vertical direction of the screen reasonably. The viewing distance is (1000±500)mm and viewing angle is 90°. Several viewers without wearing eyeglass can see 3D stereo images on the prototype of the display.

  16. Flexible Bistable Cholesteric Reflective Displays

    Science.gov (United States)

    Yang, Deng-Ke

    2006-03-01

    Cholesteric liquid crystals (ChLCs) exhibit two stable states at zero field condition-the reflecting planar state and the nonreflecting focal conic state. ChLCs are an excellent candidate for inexpensive and rugged electronic books and papers. This paper will review the display cell structure,materials and drive schemes for flexible bistable cholesteric (Ch) reflective displays.

  17. Flat panel display - Impurity doping technology for flat panel displays

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Toshiharu [Advanced Technology Planning, Sumitomo Eaton Nova Corporation, SBS Tower 9F, 10-1, Yoga 4-chome, Setagaya-ku, 158-0097 Tokyo (Japan)]. E-mail: suzuki_tsh@senova.co.jp

    2005-08-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified.

  18. Real-time synchronized rendering of multi-view video for 8Kx4K three-dimensional display with spliced four liquid crystal panels

    Science.gov (United States)

    Cui, Huilong; Sang, Xinzhu; Xing, Shujun; Ning, Jiwei; Yan, Binbin; Dou, Wenhua; Xiao, Liquan

    2016-10-01

    A high speed synchronized rendering of multi-view video for 8K×4K multi-LCD-spliced three-dimensional (3D) display system based on CUDA is demonstrated. Because the conventional image processing calculation method is no longer applicable to this 3D display system, the CUDA technology is used for 3D image processing to address the problem of low efficiency.The 8K×4K screen is composed of four LCD screens, and accurate segmentation of the scene is carried out to ensure the correct display of 3D contents and a set of controlling and the host software are optimally implemented to make all of the connected processors render 3D videos simultaneously. The system which is based on the master-slave synchronization communication mode and DIBR-CUDA accelerated algorithm is used to realize the high resolution, high frame rate, large size, and wide view angle video rendering for the real-time 3D display. Experimental result shows a stable frame-rate at 30 frame-per-second and the friendly interactive interface can be achieved.

  19. Silicon-based thin-film transistors with a high stability

    NARCIS (Netherlands)

    Stannowski, Bernd

    2002-01-01

    Thin-Film Transistors (TFTs) are widely applied as pixel-addressing devices in large-area electronics, such as active-matrix liquid-crystal displays (AMLCDs) or sensor arrays. Hydrogenated amorphous silicon (a-Si:H) and silicon nitride (a-SiNx:H) are generally used as the semiconductor and the insul

  20. Silicon-based thin-film transistors with a high stability

    NARCIS (Netherlands)

    Stannowski, Bernd

    2002-01-01

    Thin-Film Transistors (TFTs) are widely applied as pixel-addressing devices in large-area electronics, such as active-matrix liquid-crystal displays (AMLCDs) or sensor arrays. Hydrogenated amorphous silicon (a-Si:H) and silicon nitride (a-SiNx:H) are generally used as the semiconductor and the

  1. Miniature information displays: primary applications

    Science.gov (United States)

    Alvelda, Phillip; Lewis, Nancy D.

    1998-04-01

    Positioned to replace current liquid crystal display technology in many applications, miniature information displays have evolved to provide several truly portable platforms for the world's growing personal computing and communication needs. The technology and functionality of handheld computer and communicator systems has finally surpassed many of the standards that were originally established for desktop systems. In these new consumer electronics, performance, display size, packaging, power consumption, and cost have always been limiting factors for fabricating genuinely portable devices. The rapidly growing miniature information display manufacturing industry is making it possible to bring a wide range of highly anticipated new products to new markets.

  2. Research on Color Temperature and Color Reproduction Performance Based on Four Primary Colors Liquid Crystal Display%四元色液晶显示器色温与色重显性能的研究

    Institute of Scientific and Technical Information of China (English)

    李彦; 王静; 李娜; 李桂苓

    2013-01-01

    Based on the data of the test by choosing seven color temperatures and testing the colorimetric parameters of the four primary colors liquid crystal display, the relations of the color temperature and the brightness, chroma, tone, color gamut coverage of the liquid crystal display are analyzed. The result shows that while the color temperature rises up, the brightness of the LCD increases, and the color gamut coverage decreases with the distortion of some color tones and chromas.%选择7种色温,分别测试了四元色液晶显示器的色度参数,并基于测试数据,分析了色温与液晶显示器亮度、彩度、色调和色域覆盖率的关系.结果表明,色温升高时,液晶显示器的亮度加大,色域覆盖率减小,还引起某些颜色色调和彩度失真.

  3. Crystal structure of a human rhinovirus that displays part of the HIV-1 V3 loop and induces neutralizing antibodies against HIV-1.

    Science.gov (United States)

    Ding, Jianping; Smith, Allen D; Geisler, Sheila C; Ma, Xuejun; Arnold, Gail Ferstandig; Arnold, Eddy

    2002-07-01

    We report the 2.7 A resolution structure of a chimeric rhinovirus, MN-III-2, that displays part of the HIV-1 gp120 V3 loop and elicits HIV-neutralizing antibodies. The V3 loop insert is dominated by two type I beta turns. The structures of two adjacent tripeptides resemble those of analogous segments in three Fab/V3 loop peptide complexes. Although two of the three corresponding antibodies bind and neutralize MN-III-2 well, only one of the three can bind without significant rearrangement. These results suggest that the V3 loop insert: (1) can share some local conformational similarity to V3 loop sequences presented on different structural frameworks; (2) must be able to adopt multiple conformations, even in a relatively constrained environment; and (3) may mimic the conformational variability of the epitope on HIV-1, increasing the likelihood of eliciting appropriate neutralizing immune responses.

  4. Chirality versus dichroism: Competition and role in conical diffraction displayed from the Nd:Bi2ZnOB2O6 acentric biaxial laser crystal

    Science.gov (United States)

    Brenier, A.; Majchrowski, A.; Michalski, E.

    2017-10-01

    We have grown acentric chiral Nd-doped BZBO single crystals by the Kyropoulos method, cut perpendicular to the optical axis. With a focused beam at wavelengths in the spectral domain of transparency with various polarizations, the conoscopy patterns revealed the specific role of chirality: disappearance of the optical axis replaced by two C-directions, linear polarization rotation and spiral patterns. The specific rotatory power was measured. The output near field exhibits the influence of chirality on the conical diffraction. Going to wavelengths in the spectral domain of absorption corresponding to the 4I9/2 → 4F5/2 Nd3+ transition, we first studied the chirality/dichroism competition from propagation along the C-directions, characterizing the circular and elliptic eigen-modes. We exhibited the wavelengths at which the ellipse degenerates linearly, signature of the chirality/dichroism balancing. The second aspect is the existence of the optical axis which can be restored if the dichroism is high enough. In this case a singular Voigt wave can propagate. From the experimental determination of the optical parameters, a theoretical description has been proposed, leading to quite well agreement in the far field (conoscopy) and in the near field (conical diffraction).

  5. Paring Down HIV Env: Design and Crystal Structure of a Stabilized Inner Domain of HIV-1 gp120 Displaying a Major ADCC Target of the A32 Region.

    Science.gov (United States)

    Tolbert, William D; Gohain, Neelakshi; Veillette, Maxime; Chapleau, Jean-Philippe; Orlandi, Chiara; Visciano, Maria L; Ebadi, Maryam; DeVico, Anthony L; Fouts, Timothy R; Finzi, Andrés; Lewis, George K; Pazgier, Marzena

    2016-05-03

    Evidence supports a role of antibody-dependent cellular cytotoxicity (ADCC) toward transitional epitopes in the first and second constant (C1-C2) regions of gp120 (A32-like epitopes) in preventing HIV-1 infection and in vaccine-induced protection. Here, we describe the first successful attempt at isolating the inner domain (ID) of gp120 as an independent molecule that encapsulates the A32-like region within a minimal structural unit of the HIV-1 Env. Through structure-based design, we developed ID2, which consists of the ID expressed independently of the outer domain and stabilized in the CD4-bound conformation by an inter-layer disulfide bond. ID2 expresses C1-C2 epitopes in the context of CD4-triggered full-length gp120 but without any known neutralizing epitope present. Thus, ID2 represents a novel probe for the analysis and/or selective induction of antibody responses to the A32 epitope region. We also present the crystal structure of ID2 complexed with mAb A32, which defines its epitope.

  6. Colorimetric evaluation of display performance

    Science.gov (United States)

    Kosmowski, Bogdan B.

    2001-08-01

    The development of information techniques, using new technologies, physical phenomena and coding schemes, enables new application areas to be benefited form the introduction of displays. The full utilization of the visual perception of a human operator, requires the color coding process to be implemented. The evolution of displays, from achromatic (B&W) and monochromatic, to multicolor and full-color, enhances the possibilities of information coding, creating however a need for the quantitative methods of display parameter assessment. Quantitative assessment of color displays, restricted to photometric measurements of their parameters, is an estimate leading to considerable errors. Therefore, the measurements of a display's color properties have to be based on spectral measurements of the display and its elements. The quantitative assessment of the display system parameters should be made using colorimetric systems like CIE1931, CIE1976 LAB or LUV. In the paper, the constraints on the measurement method selection for the color display evaluation are discussed and the relations between their qualitative assessment and the ergonomic conditions of their application are also presented. The paper presents the examples of using LUV colorimetric system and color difference (Delta) E in the optimization of color liquid crystal displays.

  7. Universal Numeric Segmented Display

    CERN Document Server

    Azad, Md Abul kalam; Kamruzzaman, S M

    2010-01-01

    Segmentation display plays a vital role to display numerals. But in today's world matrix display is also used in displaying numerals. Because numerals has lots of curve edges which is better supported by matrix display. But as matrix display is costly and complex to implement and also needs more memory, segment display is generally used to display numerals. But as there is yet no proposed compact display architecture to display multiple language numerals at a time, this paper proposes uniform display architecture to display multiple language digits and general mathematical expressions with higher accuracy and simplicity by using a 18-segment display, which is an improvement over the 16 segment display.

  8. Microencapsulated Electrophoretic Films for Electronic Paper Displays

    Science.gov (United States)

    Amundson, Karl

    2003-03-01

    Despite the dominance of liquid crystal displays, they do not perform some functions very well. While backlit liquid crystal displays can offer excellent color performance, they wash out in bright lighting and suffer from high power consumption. Reflective liquid crystal displays have limited brightness, making these devices challenging to read for long periods of time. Flexible liquid crystal displays are difficult to manufacture and keep stable. All of these attributes (long battery lifetime, bright reflective appearance, compatibility with flexible substrates) are traits that would be found in an ideal electronic paper display - an updateable substitute for paper that could be employed in electronic books, newspapers, and other applications. I will discuss technologies that are being developed for electronic-paper-like displays, and especially on particle-based technologies. A microencapsulated electrophoretic display technology is being developed at the E Ink corporation. This display film offers offer high brightness and an ink-on-paper appearance, compatibility with flexible substrates, and image stability that can lead to very low power consumption. I will present some of the physical and chemical challenges associated with making display films with high performance.

  9. Diagnostic performance of detecting breast cancer on computed radiographic (CR) mammograms: comparison of hard copy film, 3-megapixel liquid-crystal-display (LCD) monitor and 5-megapixel LCD monitor.

    Science.gov (United States)

    Yamada, Takayuki; Suzuki, Akihiko; Uchiyama, Nachiko; Ohuchi, Noriaki; Takahashi, Shoki

    2008-11-01

    The purpose was to compare observer performance in the detection of breast cancer using hard-copy film, and 3-megapixel (3-MP) and 5-megapixel (5-MP) liquid crystal display (LCD) monitors in a simulated screening setting. We amassed 100 sample sets, including 32 patients with surgically proven breast cancer (masses present, N = 12; microcalcifications, N = 10; other types, N = 10) and 68 normal controls. All the mammograms were obtained using computed radiography (CR; sampling pitch of 50 mum). Twelve mammographers independently assessed CR mammograms presented in random order for hard-copy and soft-copy reading at minimal 4-week intervals. Observers rated the images on seven-point (1 to 7) and continuous (0 to 100) malignancy scales. Receiver-operating-characteristics analysis was performed, and the average area under the curve (AUC) was calculated for each modality. The jackknife method with the Bonferroni correction was applied to multireader/multicase analysis. The average AUC values for the 3-MP LCD, 5-MP LCD, and hard-copy film were 0.954, 0.947, and 0.956 on the seven-point scale and 0.943, 0.923, and 0.944 on the continuous scale, respectively. There were no significant differences among the three modalities on either scale. Soft-copy reading using 3-MP and 5-MP LCDs is comparable to hard-copy reading for detecting breast cancer.

  10. Influence of MTN-LCD Parameters to Liquid Crystal on Silicon Display Device%混合扭曲向列相模式的液晶盒参数对硅基液晶显示器的影响

    Institute of Scientific and Technical Information of China (English)

    姜丽; 范伟; 代永平; 张志东

    2011-01-01

    Mixed mode twisted nematic (MTN) characterized by excellent color dispersion effect and low driving voltage is used in liquid crystal on silicon (LCOS).Based on MTN mode, the influence of LCD parameters on LCOS display were simulated in this paper, such as the elastic constants, dielectric constant, pretilt angle and cell gap, et al.The simulation results can provide scientific basis for the research of LCOS.%90°混合扭曲向列相液晶(MTN)模式因其良好的关态色散特性、低驱动电压而被应用于小型或者微型硅基液晶显示器(LCOS).针对MTN模式,模拟研究了液晶弹性常数、介电各向异性、预倾角以及盒厚变化对显示效果的影响,研究结果为硅基液晶显示器的开发提供了一定的理论依据.

  11. Liquid Crystal Materials for Matrix Displays.

    Science.gov (United States)

    1981-04-01

    TBATPB-doped MBBA, which is shown as a reference curve in Figure 1. More complete data on the scattering angles of HRL-26N3 -26N4, and - 25N2 are shown...D/T is more favorable at 20 V than at 15 V dc,Don since at higher voltage TD increases, and T decreases. For example,on at 20 V and 64*C the TD /Ton...Figure 9) changes with temperature. In the lower temperature range the TD and TON decrease with increasing temperature in the same manner as n

  12. Characterising laser beams with liquid crystal displays

    CSIR Research Space (South Africa)

    Dudley, Angela L

    2016-09-01

    Full Text Available We show how one can determine the various properties of light, from the modal content of laser beams to decoding the information stored in optical fields carrying orbital angular momentum, by performing a modal decomposition. Although the modal...

  13. Addressing techniques of liquid crystal displays

    CERN Document Server

    Ruckmongathan, Temkar N

    2014-01-01

    Unique reference source that can be used from the beginning to end of a design project to aid choosing an appropriate LCD addressing technique for a given application This book will be aimed at design engineers who are likely to embed LCD drivers and controllers in many systems including systems on chip. Such designers face the challenge of making the right choice of an addressing technique that will serve them with best performance at minimal cost and complexity. Readers will be able to learn about various methods available for driving matrix LCDs and the comparisons at the end of each chap

  14. Detection of masses and microcalcifications of breast cancer on digital mammograms: comparison among hard-copy film, 3-megapixel liquid crystal display (LCD) monitors and 5-megapixel LCD monitors: an observer performance study.

    Science.gov (United States)

    Kamitani, Takeshi; Yabuuchi, Hidetake; Soeda, Hiroyasu; Matsuo, Yoshio; Okafuji, Takashi; Sakai, Shuji; Furuya, Akio; Hatakenaka, Masamitsu; Ishii, Nobuhide; Honda, Hiroshi

    2007-05-01

    The purpose of the study was to compare observer performance in the detection of masses and microcalcifications of breast cancer among hard-copy reading and soft-copy readings using 3-megapixel (3M) and 5-megapixel (5M) liquid crystal display (LCD) monitors. For the microcalcification detection test, we prepared 100 mammograms: 40 surgically verified cancer cases and 60 normal cases. For the mass detection test, we prepared 100 mammograms: 50 cancer cases and 50 normal cases. After six readers assessed both microcalcifications and masses set for each modality, receiver operating characteristic (ROC) analysis was performed. The average A(z)s for mass detection using a hard copy and 3M and 5M LCD monitors were 0.923, 0.927 and 0.920, respectively; there were no significant differences. The average A(z) for microcalcification detection using hard copy, 3M and 5M LCD monitors was 0.977, 0.954 and 0.972, respectively. There were no significant differences, but the P-values between the hard copy and 3M LCD monitor and that between the 3M and 5M LCD monitor were 0.08 and 0.09, respectively. In conclusion, the observer performances for detecting masses of breast cancers were comparable among the hard copy and two LCD monitors; however, soft-copy reading with a 3M LCD monitor showed slightly lower observer performance for detecting microcalcifications of breast cancers than hard-copy or 5M LCD monitor reading.

  15. Heath monitoring of a glass transfer robot in the mass production line of liquid crystal display using abnormal operating sounds based on wavelet packet transform and artificial neural network

    Science.gov (United States)

    Kim, Eui-Youl; Lee, Young-Joon; Lee, Sang-Kwon

    2012-07-01

    This paper presents the fault detect method of a moving transfer robot in the mass production line of liquid crystal display (LCD) manufacturers based on the wavelet packet transform (WPT) for feature extraction and the artificial neural network (ANN) for fault classification. Most of fault detection methods in a mechanical system have been researched based on the vibration signal. Unlike the existing methodologies, this study aims to minimize the uncertainty of a field engineer's decision making process for determining whether a fault is present or not based on the human auditory perception by developing a fault diagnosis system that uses the abnormal operating sound radiated from a moving transfer robot as a source signal. Abnormal operating sound radiated from a moving transfer robot has been used for this work instead of other source signals such as vibration, acoustic emission, electrical signal, etc. Its advantage as a source signal makes it possible to monitor the status of multiple faults by using only a microphone despite a relatively low sensitivity. In the application of ANN, since it is important to minimize the error of trained ANN in terms of the accuracy of fault diagnosis logic, in the paper, the number of input and target data samples was increased through a regeneration process based on statistical properties, and then the uncorrelated nodes in the input vector were also removed to improve the orthogonality of the input vector based on the entropy based feature selection method. Consequently, it can be concluded that the abnormal operating sound is sufficiently useful as a source signal for the fault diagnosis of mechanical components as well as other source signals.

  16. Invisible Display in Aluminum

    DEFF Research Database (Denmark)

    Prichystal, Jan Phuklin; Hansen, Hans Nørgaard; Bladt, Henrik Henriksen

    2005-01-01

    for an integrated display in a metal surface is often ruled by design and functionality of a product. The integration of displays in metal surfaces requires metal removal in order to clear the area of the display to some extent. The idea behind an invisible display in Aluminum concerns the processing of a metal...

  17. MyCrystals - a simple visual data management program for laboratory-scale crystallization experiments

    DEFF Research Database (Denmark)

    Løvgreen, Monika Nøhr; Løvgreen, Mikkel; Christensen, Hans Erik Mølager

    2009-01-01

    MyCrystals is designed as a user-friendly program to display crystal images and list crystallization conditions. The crystallization conditions entry fields can be customized to suit the experiments. MyCrystals is also able to sort the images by the entered crystallization conditions, which...

  18. Low driving voltage and fast-response in-plane switching liquid crystal display%低驱动电压和快速响应的共面转换液晶显示器

    Institute of Scientific and Technical Information of China (English)

    王森; 孙玉宝

    2016-01-01

    In-plane switching liquid crystal displays (IPS-LCDs)are widely applied in TFT-LCD for its excellent viewing angle and outstanding ability of color reproduction.However,its development in high-end LCDs is limited by its slow response.A fast response IPS-LCD with protrusion electrode is proposed in this paper,and its optical characteristics is simulated by TechWiz software.With the pro-trusion electrode,the driving voltage of IPS-LCD is reduced by 2.3 V.Although the driving voltage is reduced,the electric field in the liquid crystal layer is changed due to the electrode on protrusion,so the rise response speed is improved.In addition,the protrusion structure reduces the effective cell gap of the LC layer,and the decay time is proportional to the square of the cell thickness,so the decay re-sponse speed is also obviously improved.The whole response speed is improved by approximately 38% in contrast with the conventional IPS-LCD.%共面转换液晶显示器(IPS-LCD)由于其优异的视角特性和色彩还原能力在 TFT-LCD 中得到了广泛应用,然而响应速度慢的缺点始终限制着其在高端液晶显示器中的发展.本文中提出一种凸起电极结构的共面转换液晶显示器,并采用 TechWiz 软件模拟了该结构的电光特性.与传统 IPS-LCD 相比,我们提出的新结构 IPS-LCD 的驱动电压降低了2.3 V.在响应时间方面,尽管驱动电压降低了,但是由于凸起电极改变液晶层中的电场状况,因此上升响应速度得到了一定提高.此外,凸起结构减小了液晶层的等效盒厚,因为下降时间正比于液晶盒厚的平方,所以下降响应速度也得到了明显提高,该结构的整体响应速度相比传统结构提高了大约38%.

  19. A Compressive Superresolution Display

    KAUST Repository

    Heide, Felix

    2014-06-22

    In this paper, we introduce a new compressive display architecture for superresolution image presentation that exploits co-design of the optical device configuration and compressive computation. Our display allows for superresolution, HDR, or glasses-free 3D presentation.

  20. Lunar Sample Display Locations

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA provides a number of lunar samples for display at museums, planetariums, and scientific expositions around the world. Lunar displays are open to the public....

  1. Review of Display Technologies Focusing on Power Consumption

    Directory of Open Access Journals (Sweden)

    María Rodríguez Fernández

    2015-08-01

    Full Text Available This paper provides an overview of the main manufacturing technologies of displays, focusing on those with low and ultra-low levels of power consumption, which make them suitable for current societal needs. Considering the typified value obtained from the manufacturer’s specifications, four technologies—Liquid Crystal Displays, electronic paper, Organic Light-Emitting Display and Electroluminescent Displays—were selected in a first iteration. For each of them, several features, including size and brightness, were assessed in order to ascertain possible proportional relationships with the rate of consumption. To normalize the comparison between different display types, relative units such as the surface power density and the display frontal intensity efficiency were proposed. Organic light-emitting display had the best results in terms of power density for small display sizes. For larger sizes, it performs less satisfactorily than Liquid Crystal Displays in terms of energy efficiency.

  2. Liquid Crystal Motion Picture Projector①

    Institute of Scientific and Technical Information of China (English)

    SHIYongji

    1997-01-01

    A liquid crystal moving picture projector and method are described.Light incident on a liquid crystal display-type device is selectively scattered or transmitted by respective portions of liquid crystal display,and a projection mechanism projects an image formed by either such scattered light or such transmitted light.A liquid cystal moving picture projector includes a liquid crystal display for creating characteristics of an image,and projecttion optics for projecting images sequentially created by the display.The display includes a liquid crystal material capable of temporary storing information at respective areas.The temporary storage may be a function of charge storing directly on liquid crystal material.A method of projecting plural images in sequence includes:creating an image or characteristics of an image in a liquid crystal material,storing such image in such liquid crystal material,directing light at such liquid crystal material,projecting such image as a function of light transmitted through or scattered by such liquid crystal material,and creating a further image in such liquid crystal material for subsequent projection.

  3. New ultraportable display technology and applications

    Science.gov (United States)

    Alvelda, Phillip; Lewis, Nancy D.

    1998-08-01

    MicroDisplay devices are based on a combination of technologies rooted in the extreme integration capability of conventionally fabricated CMOS active-matrix liquid crystal display substrates. Customized diffraction grating and optical distortion correction technology for lens-system compensation allow the elimination of many lenses and systems-level components. The MicroDisplay Corporation's miniature integrated information display technology is rapidly leading to many new defense and commercial applications. There are no moving parts in MicroDisplay substrates, and the fabrication of the color generating gratings, already part of the CMOS circuit fabrication process, is effectively cost and manufacturing process-free. The entire suite of the MicroDisplay Corporation's technologies was devised to create a line of application- specific integrated circuit single-chip display systems with integrated computing, memory, and communication circuitry. Next-generation portable communication, computer, and consumer electronic devices such as truly portable monitor and TV projectors, eyeglass and head mounted displays, pagers and Personal Communication Services hand-sets, and wristwatch-mounted video phones are among the may target commercial markets for MicroDisplay technology. Defense applications range from Maintenance and Repair support, to night-vision systems, to portable projectors for mobile command and control centers.

  4. Invisible Display in Aluminum

    DEFF Research Database (Denmark)

    Prichystal, Jan Phuklin; Hansen, Hans Nørgaard; Bladt, Henrik Henriksen

    2005-01-01

    Bang & Olufsen a/s has been working with ideas for invisible integration of displays in metal surfaces. Invisible integration of information displays traditionally has been possible by placing displays behind transparent or semitransparent materials such as plastic or glass. The wish for an integ...... be obtained by shining light from the backside of the workpiece. When there is no light from the backside, the front surface seems totally untouched. This was achieved by laser ablation with ultra-short pulses.......Bang & Olufsen a/s has been working with ideas for invisible integration of displays in metal surfaces. Invisible integration of information displays traditionally has been possible by placing displays behind transparent or semitransparent materials such as plastic or glass. The wish...... for an integrated display in a metal surface is often ruled by design and functionality of a product. The integration of displays in metal surfaces requires metal removal in order to clear the area of the display to some extent. The idea behind an invisible display in Aluminum concerns the processing of a metal...

  5. Fundamentals of liquid crystal devices

    CERN Document Server

    Yang, Deng-Ke

    2014-01-01

    Revised throughout to cover the latest developments in the fast moving area of display technology, this 2nd edition of Fundamentals of Liquid Crystal Devices, will continue to be a valuable resource for those wishing to understand the operation of liquid crystal displays. Significant updates include new material on display components, 3D LCDs and blue-phase displays which is one of the most promising new technologies within the field of displays and it is expected that this new LC-technology will reduce the response time and the number of optical components of LC-modules. Prof. Yang is a pion

  6. Polyplanar optic display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.; Biscardi, C.; Brewster, C.; DeSanto, L. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology; Beiser, L. [Leo Beiser Inc., Flushing, NY (United States)

    1997-07-01

    The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 100 milliwatt green solid state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the electronic interfacing to the DLP{trademark} chip, the opto-mechanical design and viewing angle characteristics.

  7. Scalable Resolution Display Walls

    KAUST Repository

    Leigh, Jason

    2013-01-01

    This article will describe the progress since 2000 on research and development in 2-D and 3-D scalable resolution display walls that are built from tiling individual lower resolution flat panel displays. The article will describe approaches and trends in display hardware construction, middleware architecture, and user-interaction design. The article will also highlight examples of use cases and the benefits the technology has brought to their respective disciplines. © 1963-2012 IEEE.

  8. Standardizing visual display quality

    NARCIS (Netherlands)

    Besuijen, Ko; Spenkelink, Gerd P.J.

    1998-01-01

    The current ISO 9241–3 standard for visual display quality and the proposed user performance tests are reviewed. The standard is found to be more engineering than ergonomic and problems with system configuration, software applications, display settings, user behaviour, wear and physical environment

  9. Polyplanar optical display electronics

    Energy Technology Data Exchange (ETDEWEB)

    DeSanto, L.; Biscardi, C. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology

    1997-07-01

    The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. The prototype ten inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a 100 milliwatt green solid-state laser (10,000 hr. life) at 532 nm as its light source. To produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments. In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the Digital Micromirror Device (DMD{trademark}) circuit board is removed from the Texas Instruments DLP light engine assembly. Due to the compact architecture of the projection system within the display chassis, the DMD{trademark} chip is operated remotely from the Texas Instruments circuit board. The authors discuss the operation of the DMD{trademark} divorced from the light engine and the interfacing of the DMD{trademark} board with various video formats (CVBS, Y/C or S-video and RGB) including the format specific to the B-52 aircraft. A brief discussion of the electronics required to drive the laser is also presented.

  10. Helmet-Mounted Displays (HMD)

    Data.gov (United States)

    Federal Laboratory Consortium — The Helmet-Mounted Display labis responsible for monocular HMD day display evaluations; monocular HMD night vision performance processes; binocular HMD day display...

  11. Visual merchandising window display

    Directory of Open Access Journals (Sweden)

    Opris (Cas. Stanila M.

    2013-12-01

    Full Text Available Window display plays a major part in the selling strategies; it does not only include the simple display of goods, nowadays it is a form of art, also having the purpose of sustaining the brand image. This article wants to reveal the tools that are essential in creating a fabulous window display. Being a window designer is not an easy job, you have to always think ahead trends, to have a sense of colour, to know how to use light to attract customers in the store after only one glance at the window. The big store window displays are theatre scenes: with expensive backgrounds, special effects and high fashion mannequins. The final role of the displays is to convince customers to enter the store and trigger the purchasing act which is the final goal of the retail activity.

  12. Fluorescent protein integrated white LEDs for displays

    Science.gov (United States)

    Press, Daniel Aaron; Melikov, Rustamzhon; Conkar, Deniz; Nur Firat-Karalar, Elif; Nizamoglu, Sedat

    2016-11-01

    The usage time of displays (e.g., TVs, mobile phones, etc) is in general shorter than their functional life time, which worsens the electronic waste (e-waste) problem around the world. The integration of biomaterials into electronics can help to reduce the e-waste problem. In this study, we demonstrate fluorescent protein integrated white LEDs to use as a backlight source for liquid crystal (LC) displays for the first time. We express and purify enhanced green fluorescent protein (eGFP) and monomeric Cherry protein (mCherry), and afterward we integrate these proteins as a wavelength-converter on a blue LED chip. The protein-integrated backlight exhibits a high luminous efficacy of 248 lm/Wopt and the area of the gamut covers 80% of the NTSC color gamut. The resultant colors and objects in the image on the display can be well observed and distinguished. Therefore, fluorescent proteins show promise for display applications.

  13. Defense display market assessment

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1998-09-01

    This paper addresses the number, function and size of principal military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. Principal military displays are defined as those occupying appreciable crewstation real-estate and/or those without which the platform could not carry out its intended mission. DoD 'office' applications are excluded from this study. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, angle, color, video capability, and night vision imaging system (NVIS) compatibility. Funded, future acquisitions, planned and predicted crewstation modification kits, and form-fit upgrades are taken into account. This paper provides an overview of the DoD niche market, allowing both government and industry a necessary reference by which to meet DoD requirements for military displays in a timely and cost-effective manner. The aggregate DoD market for direct-view and large-area military displays is presently estimated to be in excess of 242,000. Miniature displays are those which must be magnified to be viewed, involve a significantly different manufacturing paradigm and are used in helmet mounted displays and thermal weapon sight applications. Some 114,000 miniature displays are presently included within Service weapon system acquisition plans. For vendor production planning purposes it is noted that foreign military sales could substantially increase these quantities. The vanishing vendor syndrome (VVS) for older display technologies continues to be a growing, pervasive problem throughout DoD, which consequently must leverage the more modern display technologies being developed for civil- commercial markets.

  14. A Liquid Crystal Displayed Method of I/O Bus Driving Based on CPLD%一种基于CPLD的I/O总线驱动液晶显示的方法

    Institute of Scientific and Technical Information of China (English)

    程晓东; 郑为民; 唐志敏

    2003-01-01

    The paper discusses a new kind of driving the LCD via I/O bus using CPLD and realizing the precise I/Ocontrol timing sequence by establishing the corresponding Verilog-HDL model. The results of application show thatthis solution can not only solve the matching of low-speed device with high-speed bus but also provide the display in-terface during the motherboard debugging process, and also prove that the whole system is reliable and stable.

  15. Crosstalk in stereoscopic displays: a review

    Science.gov (United States)

    Woods, Andrew J.

    2012-10-01

    Crosstalk, also known as ghosting or leakage, is a primary factor in determining the image quality of stereoscopic three dimensional (3D) displays. In a stereoscopic display, a separate perspective view is presented to each of the observer's two eyes in order to experience a 3D image with depth sensation. When crosstalk is present in a stereoscopic display, each eye will see a combination of the image intended for that eye, and some of the image intended for the other eye-making the image look doubled or ghosted. High levels of crosstalk can make stereoscopic images hard to fuse and lack fidelity, so it is important to achieve low levels of crosstalk in the development of high-quality stereoscopic displays. Descriptive and mathematical definitions of these terms are formalized and summarized. The mechanisms by which crosstalk occurs in different stereoscopic display technologies are also reviewed, including micropol 3D liquid crystal displays (LCDs), autostereoscopic (lenticular and parallax barrier), polarized projection, anaglyph, and time-sequential 3D on LCDs, plasma display panels and cathode ray tubes. Crosstalk reduction and crosstalk cancellation are also discussed along with methods of measuring and simulating crosstalk.

  16. Potential improvements for dual directional view displays.

    Science.gov (United States)

    Mather, Jonathan; Parry Jones, Lesley; Gass, Paul; Imai, Akira; Takatani, Tomoo; Yabuta, Koji

    2014-02-01

    Dual directional view (DDV) displays show different images to different viewers. For example, the driver of a car looking at a central DDV display could view navigation information, while the passenger, looking from a different angle, could be watching a movie. This technology, which has now established itself on the dashboards of high-end Jaguar, Mercedes, and Range Rover cars, is manufactured by Sharp Corporation using a well-known parallax barrier technique. Unfortunately parallax barriers are associated with an inevitable drop in brightness compared with a single view display. A parallax barrier-based DDV display typically has less than half the transmission of a single view display. Here we present a solution to these problems via the use of a combined microlens and parallax barrier system, which can not only boost the brightness by 55% from a parallax barrier-only system but increase the head freedom by 25% and reduce crosstalk also. However, the use of microlenses (which must be positioned between the polarizers of the LCD) can adversely affect the contrast ratio of the display. Careful choice of the LCD mode is therefore required in order to create a DDV display that is both high in brightness and contrast ratio. The use of a single-domain vertically aligned nematic (VAN) liquid crystal (LC) mode, together with a microlens plus parallax barrier system can achieve this with a contrast ratio of 1700∶1 measured at 30° to normal incidence.

  17. Small - Display Cartography

    DEFF Research Database (Denmark)

    Nissen, Flemming; Hvas, Anders; Münster-Swendsen, Jørgen

    This report comprises the work carried out in the work-package of small display cartography. The work-package has aimed at creating a general framework for the small-display cartography. A solid framework facilitates an increased use of spatial data in mobile devices - thus enabling, together...... with the rapidly evolving positioning techniques, a new category of position-dependent, map-based services to be introduced. The report consists of the following parts: Part I: Categorization of handheld devices, Part II: Cartographic design for small-display devices, Part III: Study on the GiMoDig Client ? Portal...... Service Communication and finally, Part IV: Concluding remarks and topics for further research on small-display cartography. Part II includes a separate Appendix D consisting of a cartographic design specification. Part III includes a separate Appendix C consisting of a schema specification, a separate...

  18. Flexible displays, rigid designs?

    DEFF Research Database (Denmark)

    Hornbæk, Kasper

    2015-01-01

    Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs....

  19. Monocular display unit for 3D display with correct depth perception

    Science.gov (United States)

    Sakamoto, Kunio; Hosomi, Takashi

    2009-11-01

    A study of virtual-reality system has been popular and its technology has been applied to medical engineering, educational engineering, a CAD/CAM system and so on. The 3D imaging display system has two types in the presentation method; one is a 3-D display system using a special glasses and the other is the monitor system requiring no special glasses. A liquid crystal display (LCD) recently comes into common use. It is possible for this display unit to provide the same size of displaying area as the image screen on the panel. A display system requiring no special glasses is useful for a 3D TV monitor, but this system has demerit such that the size of a monitor restricts the visual field for displaying images. Thus the conventional display can show only one screen, but it is impossible to enlarge the size of a screen, for example twice. To enlarge the display area, the authors have developed an enlarging method of display area using a mirror. Our extension method enables the observers to show the virtual image plane and to enlarge a screen area twice. In the developed display unit, we made use of an image separating technique using polarized glasses, a parallax barrier or a lenticular lens screen for 3D imaging. The mirror can generate the virtual image plane and it enlarges a screen area twice. Meanwhile the 3D display system using special glasses can also display virtual images over a wide area. In this paper, we present a monocular 3D vision system with accommodation mechanism, which is useful function for perceiving depth.

  20. Military display performance parameters

    Science.gov (United States)

    Desjardins, Daniel D.; Meyer, Frederick

    2012-06-01

    The military display market is analyzed in terms of four of its segments: avionics, vetronics, dismounted soldier, and command and control. Requirements are summarized for a number of technology-driving parameters, to include luminance, night vision imaging system compatibility, gray levels, resolution, dimming range, viewing angle, video capability, altitude, temperature, shock and vibration, etc., for direct-view and virtual-view displays in cockpits and crew stations. Technical specifications are discussed for selected programs.

  1. Raster graphics display library

    Science.gov (United States)

    Grimsrud, Anders; Stephenson, Michael B.

    1987-01-01

    The Raster Graphics Display Library (RGDL) is a high level subroutine package that give the advanced raster graphics display capabilities needed. The RGDL uses FORTRAN source code routines to build subroutines modular enough to use as stand-alone routines in a black box type of environment. Six examples are presented which will teach the use of RGDL in the fastest, most complete way possible. Routines within the display library that are used to produce raster graphics are presented in alphabetical order, each on a separate page. Each user-callable routine is described by function and calling parameters. All common blocks that are used in the display library are listed and the use of each variable within each common block is discussed. A reference on the include files that are necessary to compile the display library is contained. Each include file and its purpose are listed. The link map for MOVIE.BYU version 6, a general purpose computer graphics display system that uses RGDL software, is also contained.

  2. Display measuring system СМ-100 for LCD characterization

    Directory of Open Access Journals (Sweden)

    V. M. Sorokin

    2008-02-01

    Full Text Available Creation of new liquid crystal displays and their adaptation for different external environments are impossible without correct diagnosing of wide range of electro-optical effects inherent to nematic, smectic and cholesteric liquid crystal materials. The modern universal display measuring complexes allow to solve this problem. Among different display measuring complexes those are wide used in the world for scientific centers and enterprises in Russia, Belorussia and Ukraine the complex CM-100, which has been developed in Institute of Semiconductor Phisics of NAS of Ukraine, is the most suitable.

  3. 3D液晶显示模组不均匀分区背光扫描及其设计方法%Shutter glass type of 3D liquid crystal display module non-uniform partition scanning backlight and its design method based on

    Institute of Scientific and Technical Information of China (English)

    吴琦

    2013-01-01

    With the rapid development of liquid crystal display technology, 3D display gradually sought after the market and consumers. In the 3D LCD TV, there is a kind of shutter type 3D display technology. This technique also shot the same object's left and right eyes two pictures by two cameras at certain intervals, and synthetic treatment, on the display screen through time-sharing display out, then match the shutter glasses with the same time frequency, the same object images to the left and the right eyes respectively to watch camera captured. As the two pictures there is disparity is different, the human eye can feel the stereo image, realize 3D display effect. In order to achieve better 3D display effect, generally control the scanning backlight system through mode of backlight.%随着液晶显示技术的快速发展,3D液晶显示逐渐受到市场和消费者的追捧。在3D液晶电视中,有一类快门式3D显示技术。这种技术通过一定间隔的两台摄像机同时拍摄同一个物体的左右眼两幅画面,然后合成处理后,在显示屏上通过分时显示的方式显示出来,然后搭配与分时频率相同的快门式眼镜,使人的左右眼分别观看到摄像机拍摄到的同一物体画面。由于两幅画面存在视差的不同,人眼即可感受到了立体的影像,实现3D效果显示。为了实现更好的3D显示效果,一般通过扫描背光的方式来对背光系统进行控制。

  4. Modern Display Technologies for Airborne Applications.

    Science.gov (United States)

    1983-04-01

    from the sulphonic acid group and achieved operating life of greater than 10’ cycles with over 3 years shelf-life. The switching speed was rather slow...pitch. In spite of all this ordering, however, liquid crystals are clearly liquid, flowing readily with quite low viscosity . Consequently the...solids and is the basis of most optical effects used in displays. Other physical properties, such as electrical conductivity, elasticity, viscosity

  5. From optical MEMS to photonic crystal

    Science.gov (United States)

    Lee, Sukhan; Kim, Jideog; Lee, Hong-Seok; Moon, Il-Kwon; Won, JongHwa; Ku, Janam; Choi, Hyung; Shin, Hyungjae

    2002-10-01

    This paper presents the emergence of photonic crystals as significant optomechatronics components, following optical MEMS. It is predicted that, in the coming years, optical MEMS and photonic crystals may go through dynamic interactions leading to synergy as well as competition. First, we present the Structured Defect Photonic Crystal (SDPCTM) devised by the authors for providing the freedom of designing photonic bandgap structures, such that the application of photonic crystals be greatly extended. Then, we present the applications of optical MEMS and photonic crystals to displays and telecommunications. It is shown that many of the applications that optical MEMS can contribute to telecommunications and displays may be implemented by photonic crystals.

  6. Dynamic plasmonic colour display

    Science.gov (United States)

    Duan, Xiaoyang; Kamin, Simon; Liu, Na

    2017-02-01

    Plasmonic colour printing based on engineered metasurfaces has revolutionized colour display science due to its unprecedented subwavelength resolution and high-density optical data storage. However, advanced plasmonic displays with novel functionalities including dynamic multicolour printing, animations, and highly secure encryption have remained in their infancy. Here we demonstrate a dynamic plasmonic colour display technique that enables all the aforementioned functionalities using catalytic magnesium metasurfaces. Controlled hydrogenation and dehydrogenation of the constituent magnesium nanoparticles, which serve as dynamic pixels, allow for plasmonic colour printing, tuning, erasing and restoration of colour. Different dynamic pixels feature distinct colour transformation kinetics, enabling plasmonic animations. Through smart material processing, information encoded on selected pixels, which are indiscernible to both optical and scanning electron microscopies, can only be read out using hydrogen as a decoding key, suggesting a new generation of information encryption and anti-counterfeiting applications.

  7. The Ultimate Display

    CERN Document Server

    Fluke, C J

    2016-01-01

    Astronomical images and datasets are increasingly high-resolution and multi-dimensional. The vast majority of astronomers perform all of their visualisation and analysis tasks on low-resolution, two-dimensional desktop monitors. If there were no technological barriers to designing the ultimate stereoscopic display for astronomy, what would it look like? What capabilities would we require of our compute hardware to drive it? And are existing technologies even close to providing a true 3D experience that is compatible with the depth resolution of human stereoscopic vision? We consider the CAVE2 (an 80 Megapixel, hybrid 2D and 3D virtual reality environment directly integrated with a 100 Tflop/s GPU-powered supercomputer) and the Oculus Rift (a low- cost, head-mounted display) as examples at opposite financial ends of the immersive display spectrum.

  8. Metal-induced crystallization fundamentals and applications

    CERN Document Server

    Wang, Zumin; Mittemeijer, Eric J

    2014-01-01

    Introduction to Metal-Induced CrystallizationAtomic Mechanisms and Interface Thermodynamics of Metal-Induced Crystallization of Amorphous Semiconductors at Low TemperaturesThermodynamics and Kinetics of Layer Exchange upon Low-Temperature Annealing Amorphous Si/Polycrystalline Al Layered StructuresMetal-Induced Crystallization by Homogeneous Insertion of Metallic Species in Amorphous SemiconductorsAluminum-Induced Crystallization: Applications in Photovoltaic TechnologiesApplications of Metal-Induced Crystallization for Advanced Flat-Panel DisplaysLaser-Assisted Meta

  9. Refreshing Refreshable Braille Displays.

    Science.gov (United States)

    Russomanno, Alexander; O'Modhrain, Sile; Gillespie, R Brent; Rodger, Matthew W M

    2015-01-01

    The increased access to books afforded to blind people via e-publishing has given them long-sought independence for both recreational and educational reading. In most cases, blind readers access materials using speech output. For some content such as highly technical texts, music, and graphics, speech is not an appropriate access modality as it does not promote deep understanding. Therefore blind braille readers often prefer electronic braille displays. But, these are prohibitively expensive. The search is on, therefore, for a low-cost refreshable display that would go beyond current technologies and deliver graphical content as well as text. And many solutions have been proposed, some of which reduce costs by restricting the number of characters that can be displayed, even down to a single braille cell. In this paper, we demonstrate that restricting tactile cues during braille reading leads to poorer performance in a letter recognition task. In particular, we show that lack of sliding contact between the fingertip and the braille reading surface results in more errors and that the number of errors increases as a function of presentation speed. These findings suggest that single cell displays which do not incorporate sliding contact are likely to be less effective for braille reading.

  10. Virtual Auditory Displays

    Science.gov (United States)

    2000-01-01

    timbre , intensity, distance, room modeling, radio communication Virtual Environments Handbook Chapter 4 Virtual Auditory Displays Russell D... musical note “A” as a pure sinusoid, there will be 440 condensations and rarefactions per second. The distance between two adjacent condensations or...and complexity are pitch, loudness, and timbre respectively. This distinction between physical and perceptual measures of sound properties is an

  11. Virtual acoustic displays

    Science.gov (United States)

    Wenzel, Elizabeth M.

    1991-01-01

    A 3D auditory display can potentially enhance information transfer by combining directional and iconic information in a quite naturalistic representation of dynamic objects in the interface. Another aspect of auditory spatial clues is that, in conjunction with other modalities, it can act as a potentiator of information in the display. For example, visual and auditory cues together can reinforce the information content of the display and provide a greater sense of presence or realism in a manner not readily achievable by either modality alone. This phenomenon will be particularly useful in telepresence applications, such as advanced teleconferencing environments, shared electronic workspaces, and monitoring telerobotic activities in remote or hazardous situations. Thus, the combination of direct spatial cues with good principles of iconic design could provide an extremely powerful and information-rich display which is also quite easy to use. An alternative approach, recently developed at ARC, generates externalized, 3D sound cues over headphones in realtime using digital signal processing. Here, the synthesis technique involves the digital generation of stimuli using Head-Related Transfer Functions (HRTF's) measured in the two ear-canals of individual subjects. Other similar approaches include an analog system developed by Loomis, et. al., (1990) and digital systems which make use of transforms derived from normative mannikins and simulations of room acoustics. Such an interface also requires the careful psychophysical evaluation of listener's ability to accurately localize the virtual or synthetic sound sources. From an applied standpoint, measurement of each potential listener's HRTF's may not be possible in practice. For experienced listeners, localization performance was only slightly degraded compared to a subject's inherent ability. Alternatively, even inexperienced listeners may be able to adapt to a particular set of HRTF's as long as they provide adequate

  12. A crystal barrel

    CERN Multimedia

    2007-01-01

    The production of crystals for the barrel of the CMS electromagnetic calorimeter has been completed. This is an important milestone for the experiment, which received the last of its 62,960 crystals on 9 March. The members of the team responsible for the crystal acceptance testing at CERN display the last crystal for the CMS electromagnetic calorimeter barrel. From left to right: Igor Tarasov, Etiennette Auffray and Hervé Cornet.One of the six machines specially developed to measure 67 different parameters on each crystal. Igor Tarasov is seen inserting the last batch of crystals into the machine. The last of the 62,960 CMS barrel crystals arrived at CERN on 9 March. Once removed from its polystyrene protection, this delicate crystal, like thousands of its predecessors, will be inserted into the last of the 36 supermodules of the barrel electromagnetic calorimeter in a few days' time. This marks the end of an important chapter in an almost 15-year-long journey by the CMS crystals team, some of whose member...

  13. Image Descriptors for Displays

    Science.gov (United States)

    1975-03-01

    hypothetical televison display. The viewing distance is 4 picture heights, and the bandwidth limitation has been set by the U.S. Monochrome Standards...significantly influence the power spectrum over most of the video frequency range. A large dc component and a small random component provide another scene... influences . It was Illuminated with natural light to a brightness of over 300 ft-L. The high brightness levels were chosen so as to nearly reproduce the

  14. Refrigerated display cabinets; Butikskyla

    Energy Technology Data Exchange (ETDEWEB)

    Fahlen, Per

    2000-07-01

    This report summarizes experience from SP research and assignments regarding refrigerated transport and storage of food, mainly in the retail sector. It presents the fundamentals of heat and mass transfer in display cabinets with special focus on indirect systems and secondary refrigerants. Moreover, the report includes a brief account of basic food hygiene and the related regulations. The material has been compiled for educational purposes in the Masters program at Chalmers Technical University.

  15. Market trends in the projection display industry

    Science.gov (United States)

    Dash, Sweta

    2001-03-01

    The projection display industry represents a multibillion- dollar market that includes four distinct technologies. High-volume consumer products and high-value business products drive the market, with different technologies being used in different application markets. The consumer market is dominated by rear CRT technology, especially in the projection TV segment. Rear LCD (liquid crystal display), MEMS/DLP (or Digital Light Processing TM) and LCOS (Liquid-crystal-on-silicon) TVs are slowly emerging as future competitors to rear CRT projectors. Front CRT projectors are also facing challenges from LCD and DLP technology for the home theater market while the business market is completely dominated by front LCD and DLP technology. Three-chip DLP projectors have replaced liquid crystal light valves in large venue applications where projectors have higher light output requirements. In recent years front LCD and LCOS projectors have been increasingly competing with 3-chip DLP projectors especially at the low end of the large venue application market. Within the next five years the projection market will experience very fast growth. Sales and presentation applications, which are the fastest growing applications in the business market, will continue to be the major driving force for the growth for front projectors, and the shift in the consumer market to digital and HDTV products will drive the rear projection market.

  16. Book Display as Adult Service

    Directory of Open Access Journals (Sweden)

    Matthew S. Moore

    1997-03-01

    Full Text Available 無Book display as an adult service is defined as choosing and positioning adult books from the collection to increase their circulation. The author contrasts bookstore arrangement for sales versus library arrangement for access. The paper considers the library-as-a-whole as a display, examines the right size for an in-library display, and discusses mass displays, end-caps, on-shelf displays, and the Tiffany approach. The author proposes that an effective display depends on an imaginative, unifying theme, and that book displays are part of the joy of libraries.

  17. Handbook of Visual Display Technology

    CERN Document Server

    Cranton, Wayne; Fihn, Mark

    2012-01-01

    The Handbook of Visual Display Technology is a unique work offering a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. An invaluable compilation of information, the Handbook will serve as a single reference source with expert contributions from over 150 international display professionals and academic researchers. All classes of display device are covered including LCDs, reflective displays, flexible solutions and emissive devices such as OLEDs and plasma displays, with discussion of established principles, emergent technologies, and particular areas of application. The wide-ranging content also encompasses the fundamental science of light and vision, image manipulation, core materials and processing techniques, display driving and metrology.

  18. Crystals in crystals

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Schmidt, I.; Carlsson, A.;

    2005-01-01

    A major factor governing the performance of catalytically active particles supported on a zeolite carrier is the degree of dispersion. It is shown that the introduction of noncrystallographic mesopores into zeolite single crystals (silicalite-1, ZSM-5) may increase the degree of particle dispersion...... of the zeolite particles, particularly after thermal treatment. When using mesoporous zeolites, the particles were evenly distributed throughout the mesopore system of the zeolitic support, even after calcination, leading to nanocrystals within mesoporous zeolite single crystals....

  19. Technologies and solutions for data display in the operating room.

    Science.gov (United States)

    Bitterman, Noemi

    2006-06-01

    Recent advances in technology have led to the introduction of a variety of innovative devices, each with their own platform for data display, into the operating room (OR). While these innovative applications are expanding the traditional boundaries of the surgical space and enhancing treatment capabilities, the introduction of additional screens and displays is placing an ever-increasing load on the OR team. This review describes the main data display platforms currently available in ORs: computer monitors with CRT (cathode ray tube) or LCD (liquid crystal display) screens, suspended imaging displays, wearable computers (WC), auditory displays and tactile (haptic) displays. The different display platforms are evaluated according to their compatibility with the characteristics of the working environment (OR), the monitoring task, and the users (the surgical team). No single display configuration provides an ultimate solution for presenting patient data in the OR. A multi-sensory data display including visual, acoustic and haptic manipulation is suggested as a promising configuration for data display in the OR.

  20. Navigational Heads-Up Display: Will a Shipboard Augmented Electronic Navigation System Sink or Swim?

    Science.gov (United States)

    2015-03-01

    76 Table 6. Subject Video Game Practice...Interface GPS Global Positioning System HMD Head-Mounted Display HUD Heads-Up Display IP Internet Protocol IR Infrared LCD Liquid-Crystal Display...Stress Disorder SDK Software Development Kit SOG Speed over Ground SWOS Surface Warfare Officer School USD United States Dollar USNS United States

  1. Uniform LED illuminator for miniature displays

    Science.gov (United States)

    Medvedev, Vladimir; Pelka, David G.; Parkyn, William A.

    1998-10-01

    The Total Internally Reflecting (TIR) lens is a faceted structure composed of prismatic elements that collect a source's light over a much larger angular range than a conventional Fresnel lens. It has been successfully applied to the efficient collimation of light from incandescent and fluorescent lamps, and from light-emitting diodes (LEDs). A novel LED-powered collimating backlight is presented here, for uniformly illuminating 0.25'-diagonal miniature liquid- crystal displays, which are a burgeoning market for pagers, cellular phones, digital cameras, camcorders, and virtual- reality displays. The backlight lens consists of a central dual-asphere refracting section and an outer TIR section, properly curved with a curved exit face.

  2. Crystal science fundamentals

    OpenAIRE

    Ramachandran, V.; Halfpenny, PJ; Roberts, KJ

    2017-01-01

    The fundamentals of crystal science notably crystallography, crystal chemistry, crystal defects, crystal morphology and the surface chemistry of crystals are introduced with particular emphasis on organic crystals.

  3. 21 CFR 880.6970 - Liquid crystal vein locator.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous... skin by displaying the color changes of heat sensitive liquid crystals (cholesteric esters)....

  4. Variations in performance of LCDs are still evident after DICOM gray-scale standard display calibration.

    LENUS (Irish Health Repository)

    Lowe, Joanna M

    2010-07-01

    Quality assurance in medical imaging is directly beneficial to image quality. Diagnostic images are frequently displayed on secondary-class displays that have minimal or no regular quality assurance programs, and treatment decisions are being made from these display types. The purpose of this study is to identify the impact of calibration on physical and psychophysical performance of liquid crystal displays (LCDs) and the extent of potential variance across various types of LCDs.

  5. LHCb Event display

    CERN Document Server

    Trisovic, Ana

    2014-01-01

    The LHCb Event Display was made for educational purposes at the European Organization for Nuclear Research, CERN in Geneva, Switzerland. The project was implemented as a stand-alone application using C++ and ROOT, a framework developed by CERN for data analysis. This paper outlines the development and architecture of the application in detail, as well as the motivation for the development and the goals of the exercise. The application focuses on the visualization of events recorded by the LHCb detector, where an event represents a set of charged particle tracks in one proton-proton collision. Every particle track is coloured by its type and can be selected to see its essential information such as mass and momentum. The application allows students to save this information and calculate the invariant mass for any pair of particles. Furthermore, the students can use additional calculating tools in the application and build up a histogram of these invariant masses. The goal for the students is to find a $D^0$ par...

  6. Colorimetry for CRT displays.

    Science.gov (United States)

    Golz, Jürgen; MacLeod, Donald I A

    2003-05-01

    We analyze the sources of error in specifying color in CRT displays. These include errors inherent in the use of the color matching functions of the CIE 1931 standard observer when only colorimetric, not radiometric, calibrations are available. We provide transformation coefficients that prove to correct the deficiencies of this observer very well. We consider four different candidate sets of cone sensitivities. Some of these differ substantially; variation among candidate cone sensitivities exceeds the variation among phosphors. Finally, the effects of the recognized forms of observer variation on the visual responses (cone excitations or cone contrasts) generated by CRT stimuli are investigated and quantitatively specified. Cone pigment polymorphism gives rise to variation of a few per cent in relative excitation by the different phosphors--a variation larger than the errors ensuing from the adoption of the CIE standard observer, though smaller than the differences between some candidate cone sensitivities. Macular pigmentation has a larger influence, affecting mainly responses to the blue phosphor. The estimated combined effect of all sources of observer variation is comparable in magnitude with the largest differences between competing cone sensitivity estimates but is not enough to disrupt very seriously the relation between the L and M cone weights and the isoluminance settings of individual observers. It is also comparable with typical instrumental colorimetric errors, but we discuss these only briefly.

  7. Data Display in Qualitative Research

    Directory of Open Access Journals (Sweden)

    Susana Verdinelli PsyD

    2013-02-01

    Full Text Available Visual displays help in the presentation of inferences and conclusions and represent ways of organizing, summarizing, simplifying, or transforming data. Data displays such as matrices and networks are often utilized to enhance data analysis and are more commonly seen in quantitative than in qualitative studies. This study reviewed the data displays used by three prestigious qualitative research journals within a period of three years. The findings include the types of displays used in these qualitative journals, the frequency of use, and the purposes for using visual displays as opposed to presenting data in text.

  8. Modeling Power-Constrained Optimal Backlight Dimming for Color Displays

    DEFF Research Database (Denmark)

    Burini, Nino; Nadernejad, Ehsan; Korhonen, Jari

    2013-01-01

    In this paper, we present a framework for modeling color liquid crystal displays (LCDs) having local light-emitting diode (LED) backlight with dimming capability. The proposed framework includes critical aspects like leakage, clipping, light diffusion and human perception of luminance and allows...

  9. Spatial constraints of stereopsis in video displays

    Science.gov (United States)

    Schor, Clifton

    1989-01-01

    Recent development in video technology, such as the liquid crystal displays and shutters, have made it feasible to incorporate stereoscopic depth into the 3-D representations on 2-D displays. However, depth has already been vividly portrayed in video displays without stereopsis using the classical artists' depth cues described by Helmholtz (1866) and the dynamic depth cues described in detail by Ittleson (1952). Successful static depth cues include overlap, size, linear perspective, texture gradients, and shading. Effective dynamic cues include looming (Regan and Beverly, 1979) and motion parallax (Rogers and Graham, 1982). Stereoscopic depth is superior to the monocular distance cues under certain circumstances. It is most useful at portraying depth intervals as small as 5 to 10 arc secs. For this reason it is extremely useful in user-video interactions such as telepresence. Objects can be manipulated in 3-D space, for example, while a person who controls the operations views a virtual image of the manipulated object on a remote 2-D video display. Stereopsis also provides structure and form information in camouflaged surfaces such as tree foliage. Motion parallax also reveals form; however, without other monocular cues such as overlap, motion parallax can yield an ambiguous perception. For example, a turning sphere, portrayed as solid by parallax can appear to rotate either leftward or rightward. However, only one direction of rotation is perceived when stereo-depth is included. If the scene is static, then stereopsis is the principal cue for revealing the camouflaged surface structure. Finally, dynamic stereopsis provides information about the direction of motion in depth (Regan and Beverly, 1979). Clearly there are many spatial constraints, including spatial frequency content, retinal eccentricity, exposure duration, target spacing, and disparity gradient, which - when properly adjusted - can greatly enhance stereodepth in video displays.

  10. Dynamic exit pupil trackers for autostereoscopic displays.

    Science.gov (United States)

    Akşit, Kaan; Baghsiahi, Hadi; Surman, Phil; Ölçer, Selim; Willman, Eero; Selviah, David R; Day, Sally; Urey, Hakan

    2013-06-17

    This paper describes the first demonstrations of two dynamic exit pupil (DEP) tracker techniques for autostereoscopic displays. The first DEP tracker forms an exit pupil pair for a single viewer in a defined space with low intraocular crosstalk using a pair of moving shutter glasses located within the optical system. A display prototype using the first DEP tracker is constructed from a pair of laser projectors, pupil-forming optics, moving shutter glasses at an intermediate pupil plane, an image relay lens, and a Gabor superlens based viewing screen. The left and right eye images are presented time-sequentially to a single viewer and seen as a 3D image without wearing glasses and allows the viewer to move within a region of 40 cm × 20 cm in the lateral plane, and 30 cm along the axial axis. The second DEP optics can move the exit pupil location dynamically in a much larger 3D space by using a custom spatial light modulator (SLM) forming an array of shutters. Simultaneous control of multiple exit pupils in both lateral and axial axes is demonstrated for the first time and provides a viewing volume with an axial extent of 0.6-3 m from the screen and within a lateral viewing angle of ± 20° for multiple viewers. This system has acceptable crosstalk (< 5%) between the stereo image pairs. In this novel version of the display the optical system is used as an advanced dynamic backlight for a liquid crystal display (LCD). This has advantages in terms of overall display size as there is no requirement for an intermediate image, and in image quality. This system has acceptable crosstalk (< 5%) between the stereo image pairs.

  11. Unique interactive projection display screen

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.

    1997-11-01

    Projection systems continue to be the best method to produce large (1 meter and larger) displays. However, in order to produce a large display, considerable volume is typically required. The Polyplanar Optic Display (POD) is a novel type of projection display screen, which for the first time, makes it possible to produce a large projection system that is self-contained and only inches thick. In addition, this display screen is matte black in appearance allowing it to be used in high ambient light conditions. This screen is also interactive and can be remotely controlled via an infrared optical pointer resulting in mouse-like control of the display. Furthermore, this display need not be flat since it can be made curved to wrap around a viewer as well as being flexible.

  12. MicroDisplay technology: from eyeglass-mounted displays to portable projectors to the Dick Tracy video phone

    Science.gov (United States)

    Alvelda, Phillip

    1997-06-01

    MicroDisplay devices are based on a combination of technologies ranging from the extreme integration capability of conventionally fabricated CMOS active-matrix liquid crystal display substrates to proprietary tunable color- filter technology, to optical distortion correction technology for lens-system compensation. All of these technologies were devised to create a line of application- specific integrated circuit single-chip display devices with integrated computing, memory, and communication circuitry. Next-generation portable communication, computer, and consumer electronic devices such as truly portable monitor and TV projectors, eyeglass-clip-on virtual displays, pagers and personal communication services hand-sets, and wristwatch-mounted video phones are all target markets for MicroDisplay technology.

  13. Augmenting digital displays with computation

    Science.gov (United States)

    Liu, Jing

    As we inevitably step deeper and deeper into a world connected via the Internet, more and more information will be exchanged digitally. Displays are the interface between digital information and each individual. Naturally, one fundamental goal of displays is to reproduce information as realistically as possible since humans still care a lot about what happens in the real world. Human eyes are the receiving end of such information exchange; therefore it is impossible to study displays without studying the human visual system. In fact, the design of displays is rather closely coupled with what human eyes are capable of perceiving. For example, we are less interested in building displays that emit light in the invisible spectrum. This dissertation explores how we can augment displays with computation, which takes both display hardware and the human visual system into consideration. Four novel projects on display technologies are included in this dissertation: First, we propose a software-based approach to driving multiview autostereoscopic displays. Our display algorithm can dynamically assign views to hardware display zones based on multiple observers' current head positions, substantially reducing crosstalk and stereo inversion. Second, we present a dense projector array that creates a seamless 3D viewing experience for multiple viewers. We smoothly interpolate the set of viewer heights and distances on a per-vertex basis across the arrays field of view, reducing image distortion, crosstalk, and artifacts from tracking errors. Third, we propose a method for high dynamic range display calibration that takes into account the variation of the chrominance error over luminance. We propose a data structure for enabling efficient representation and querying of the calibration function, which also allows user-guided balancing between memory consumption and the amount of computation. Fourth, we present user studies that demonstrate that the ˜ 60 Hz critical flicker fusion

  14. Rapid display of radiographic images

    Science.gov (United States)

    Cox, Jerome R., Jr.; Moore, Stephen M.; Whitman, Robert A.; Blaine, G. James; Jost, R. Gilbert; Karlsson, L. M.; Monsees, Thomas L.; Hassen, Gregory L.; David, Timothy C.

    1991-07-01

    The requirements for the rapid display of radiographic images exceed the capabilities of widely available display, computer, and communications technologies. Computed radiography captures data with a resolution of about four megapixels. Large-format displays are available that can present over four megapixels. One megapixel displays are practical for use in combination with large-format displays and in areas where the viewing task does not require primary diagnosis. This paper describes an electronic radiology system that approximates the highest quality systems, but through the use of several interesting techniques allows the possibility of its widespread installation throughout hospitals. The techniques used can be grouped under three major system concepts: a local, high-speed image server, one or more physician's workstations each with one or more high-performance auxiliary displays specialized to the radiology viewing task, and dedicated, high-speed communication links between the server and the displays. This approach is enhanced by the use of a progressive transmission scheme to decrease the latency for viewing four megapixel images. The system includes an image server with storage for over 600 4-megapixel images and a high-speed link. A subsampled megapixel image is fetched from disk and transmitted to the display in about one second followed by the full resolution 4-megapixel image in about 2.5 seconds. Other system components include a megapixel display with a 6-megapixel display memory space and frame-rate update of image roam, zoom, and contrast. Plans for clinical use are presented.

  15. X-1 on display

    Science.gov (United States)

    1949-01-01

    A Bell Aircraft Corporation X-1 series aircraft on display at an Open House at NACA Muroc Flight Test Unit or High-Speed Flight Research Station hangar on South Base of Edwards Air Force Base, California. (The precise date of the photo is uncertain, but it is probably before 1948.) The instrumentation that was carried aboard the aircraft to gather data is on display. The aircraft data was recorded on oscillograph film that was read, calibrated, and converted into meaningful parameters for the engineers to evaluate from each research flight. In the background of the photo are several early U.S. jets. These include several Lockheed P-80 Shooting Stars, which were used as chase planes on X-1 flights; two Bell P-59 Airacomets, the first U.S. jet pursuit aircraft (fighter in later parlance); and a prototype Republic XP-84 Thunderjet. There were five versions of the Bell X-1 rocket-powered research aircraft that flew at the NACA High-Speed Flight Research Station, Edwards, California. The bullet-shaped X-1 aircraft were built by Bell Aircraft Corporation, Buffalo, N.Y. for the U.S. Army Air Forces (after 1947, U.S. Air Force) and the National Advisory Committee for Aeronautics (NACA). The X-1 Program was originally designated the XS-1 for eXperimental Sonic. The X-1's mission was to investigate the transonic speed range (speeds from just below to just above the speed of sound) and, if possible, to break the 'sound barrier.' Three different X-1s were built and designated: X-1-1, X-1-2 (later modified to become the X-1E), and X-1-3. The basic X-1 aircraft were flown by a large number of different pilots from 1946 to 1951. The X-1 Program not only proved that humans could go beyond the speed of sound, it reinforced the understanding that technological barriers could be overcome. The X-1s pioneered many structural and aerodynamic advances including extremely thin, yet extremely strong wing sections; supersonic fuselage configurations; control system requirements; powerplant

  16. Laser illuminated flat panel display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.

    1995-12-31

    A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  17. Flexible ferroelectric organic crystals

    Science.gov (United States)

    Owczarek, Magdalena; Hujsak, Karl A.; Ferris, Daniel P.; Prokofjevs, Aleksandrs; Majerz, Irena; Szklarz, Przemysław; Zhang, Huacheng; Sarjeant, Amy A.; Stern, Charlotte L.; Jakubas, Ryszard; Hong, Seungbum; Dravid, Vinayak P.; Stoddart, J. Fraser

    2016-10-01

    Flexible organic materials possessing useful electrical properties, such as ferroelectricity, are of crucial importance in the engineering of electronic devices. Up until now, however, only ferroelectric polymers have intrinsically met this flexibility requirement, leaving small-molecule organic ferroelectrics with room for improvement. Since both flexibility and ferroelectricity are rare properties on their own, combining them in one crystalline organic material is challenging. Herein, we report that trisubstituted haloimidazoles not only display ferroelectricity and piezoelectricity--the properties that originate from their non-centrosymmetric crystal lattice--but also lend their crystalline mechanical properties to fine-tuning in a controllable manner by disrupting the weak halogen bonds between the molecules. This element of control makes it possible to deliver another unique and highly desirable property, namely crystal flexibility. Moreover, the electrical properties are maintained in the flexible crystals.

  18. Flexible ferroelectric organic crystals

    Science.gov (United States)

    Owczarek, Magdalena; Hujsak, Karl A.; Ferris, Daniel P.; Prokofjevs, Aleksandrs; Majerz, Irena; Szklarz, Przemysław; Zhang, Huacheng; Sarjeant, Amy A.; Stern, Charlotte L.; Jakubas, Ryszard; Hong, Seungbum; Dravid, Vinayak P.; Stoddart, J. Fraser

    2016-01-01

    Flexible organic materials possessing useful electrical properties, such as ferroelectricity, are of crucial importance in the engineering of electronic devices. Up until now, however, only ferroelectric polymers have intrinsically met this flexibility requirement, leaving small-molecule organic ferroelectrics with room for improvement. Since both flexibility and ferroelectricity are rare properties on their own, combining them in one crystalline organic material is challenging. Herein, we report that trisubstituted haloimidazoles not only display ferroelectricity and piezoelectricity—the properties that originate from their non-centrosymmetric crystal lattice—but also lend their crystalline mechanical properties to fine-tuning in a controllable manner by disrupting the weak halogen bonds between the molecules. This element of control makes it possible to deliver another unique and highly desirable property, namely crystal flexibility. Moreover, the electrical properties are maintained in the flexible crystals. PMID:27734829

  19. Maintenance Procedure Display: Head Mounted Display (HMD) Evaluations

    Science.gov (United States)

    Whitmore, Milrian; Litaker, Harry L., Jr.; Solem, Jody A.; Holden, Kritina L.; Hoffman, Ronald R.

    2007-01-01

    A viewgraph presentation describing maintenance procedures for head mounted displays is shown. The topics include: 1) Study Goals; 2) Near Eye Displays (HMDs); 3) Design; 4) Phase I-Evaluation Methods; 5) Phase 1 Results; 6) Improved HMD Mounting; 7) Phase 2 -Evaluation Methods; 8) Phase 2 Preliminary Results; and 9) Next Steps.

  20. A multilayer display augmented by alternating layers of lenticular sheets

    Science.gov (United States)

    Gotoda, Hironobu

    2014-03-01

    A multilayer display is an autostereoscopic display constructed by stacking multiple layers of LC (liquid crystal) panels on top of a light source. It is capable of delivering smooth, continuous, and position-dependent images to viewers within a prescribed viewing zone. However, the images thus delivered may contain artifacts, which are inconsistent with real 3D scenes. For example, objects occluding one another may fuse together, or get obscured in the delivered images. To reduce such artifacts, it is often necessary to narrow the viewing zone. Using a directional rather than a uniform light source is one way to mitigate this problem. In this work, we present another solution to the problem. We propose an integrated architecture of multilayer and lenticular displays, where multiple LC panels are sandwiched between pairs of lenticular sheets. By associating a pair of lenticular sheets with a LC panel, each pixel in the panel is transformed into a view-dependent pixel, which is visible only from a particular viewing direction. Since all pixels in the integrated architecture are view-dependent, the display is partitioned into several sub-displays, each of which corresponds to a narrow viewing zone. The partitioning of display will reduce the possibility that the artifacts are noticeable in the delivered images. We will show several simulation results confirming that the proposed extension of multilayer display can deliver more plausible images than conventional multilayer display.

  1. Updated defense display market assessment

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1999-08-01

    This paper addresses the number, function and size of principal military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. Principal military displays are defined as those occupying appreciable crewstation real-estate and/or those without which the platform could not carry out its intended mission. DoD 'office' applications are excluded from this study. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, angle, color, video capability, and night vision imaging system compatibility. Funded, future acquisitions, planned and predicted crewstation modification kits, and form-fit upgrades are taken into account. This paper provides an overview of the DoD niche market, allowing both government and industry a necessary reference by which to meet DoD requirements for military displays in a timely and cost-effective manner. The aggregate DoD installed base for direct-view and large-area military displays is presently estimated to be in excess of 313,000. Miniature displays are those which must be magnified to be viewed, involve a significantly different manufacturing paradigm and are used in helmet mounted displays and thermal weapon sight applications. Some 114,000 miniature displays are presently included within future weapon system acquisition plans. For vendor production planning purposes it is noted that foreign military sales could substantially increase these quantities. The vanishing vendor syndrome (VVS) for older display technologies continues to be a growing, pervasive problem throughout DoD, which consequently must leverage the more modern, especially flat panel, display technologies being developed to replace older, especially cathode ray tube, technology for civil-commercial markets. Total DoD display needs (FPD, HMD) are some 427,000.

  2. Evaluation of an organic light-emitting diode display for precise visual stimulation.

    Science.gov (United States)

    Ito, Hiroyuki; Ogawa, Masaki; Sunaga, Shoji

    2013-06-11

    A new type of visual display for presentation of a visual stimulus with high quality was assessed. The characteristics of an organic light-emitting diode (OLED) display (Sony PVM-2541, 24.5 in.; Sony Corporation, Tokyo, Japan) were measured in detail from the viewpoint of its applicability to visual psychophysics. We found the new display to be superior to other display types in terms of spatial uniformity, color gamut, and contrast ratio. Changes in the intensity of luminance were sharper on the OLED display than those on a liquid crystal display. Therefore, such OLED displays could replace conventional cathode ray tube displays in vision research for high quality stimulus presentation. Benefits of using OLED displays in vision research were especially apparent in the fields of low-level vision, where precise control and description of the stimulus are needed, e.g., in mesopic or scotopic vision, color vision, and motion perception.

  3. After-effects of TFT-LCD display polarity and display colour on the detection of low-contrast objects.

    Science.gov (United States)

    Mayr, Susanne; Buchner, Axel

    2010-07-01

    Participants performed a word-non-word discrimination task within a car control display emulated on a thin film transistor liquid-crystal display (TFT-LCD). The task simulated an information read-out from a TFT-LCD-based instrument panel. Subsequently, participants performed a low-contrast object detection task that simulated the detection of objects during night-time driving. In experiment 1, words/non-words were presented black-on-white (positive polarity) or white-on-black (negative polarity). In experiments 2 and 3, display colour was additionally manipulated. A positive polarity advantage in the discrimination task was consistently observed. In contrast, positive displays interfered more than negative displays with subsequent detection. The detrimental after-effect of positive polarity displays was strong with white and blue, reduced with amber and absent with red displays. Subjective measures showed a preference for blue over red, but a slight advantage for amber over blue. Implications for TFT-LCD design are derived from the results. STATEMENT OF RELEVANCE: When using TFT-LCDs as car instrument panels, positive polarity red TFT-LCDs are very likely to lead to good instrument readability while at the same time minimising - relative to other colours - the negative effects of an illuminated display on low-contrast object detection during night-time driving.

  4. Three-dimensional display technologies.

    Science.gov (United States)

    Geng, Jason

    2013-01-01

    The physical world around us is three-dimensional (3D), yet traditional display devices can show only two-dimensional (2D) flat images that lack depth (i.e., the third dimension) information. This fundamental restriction greatly limits our ability to perceive and to understand the complexity of real-world objects. Nearly 50% of the capability of the human brain is devoted to processing visual information [Human Anatomy & Physiology (Pearson, 2012)]. Flat images and 2D displays do not harness the brain's power effectively. With rapid advances in the electronics, optics, laser, and photonics fields, true 3D display technologies are making their way into the marketplace. 3D movies, 3D TV, 3D mobile devices, and 3D games have increasingly demanded true 3D display with no eyeglasses (autostereoscopic). Therefore, it would be very beneficial to readers of this journal to have a systematic review of state-of-the-art 3D display technologies.

  5. Modeling liquid crystal polymeric devices

    Science.gov (United States)

    Gimenez Pinto, Vianney Karina

    The main focus of this work is the theoretical and numerical study of materials that combine liquid crystal and polymer. Liquid crystal elastomers are polymeric materials that exhibit both the ordered properties of the liquid crystals and the elastic properties of rubbers. Changing the order of the liquid crystal molecules within the polymer network can induce shape change. These materials are very valuable for applications such as actuators, sensors, artificial muscles, haptic displays, etc. In this work we apply finite element elastodynamics simulations to study the temperature induced shape deformation in nematic elastomers with complex director microstructure. In another topic, we propose a novel numerical method to model the director dynamics and microstructural evolution of three dimensional nematic and cholesteric liquid crystals. Numerical studies presented in this work are in agreement with experimental observations and provide insight into the design of application devices.

  6. Jacquard-woven photonic bandgap fiber displays

    CERN Document Server

    Sayed, Imran; Skorobogatiy, Maksim

    2010-01-01

    We present an overview of photonic textile displays woven on a Jacquard loom, using newly discovered polymer photonic bandgap fibers that have the ability to change color and appearance when illuminated with ambient or transmitted light. The photonic fiber can be thin (smaller than 300 microns in diameter) and highly flexible, which makes it possible to weave in the weft on a computerized Jacquard loom and develop intricate double weave structures together with a secondary weft yarn. We demonstrate how photonic crystal fibers enable a variety of color and structural patterns on the textile, and how dynamic imagery can be created by balancing the ambient and emitted radiation. Finally, a possible application in security ware for low visibility conditions is described as an example.

  7. Demonstrations with a Liquid Crystal Shutter

    Science.gov (United States)

    Kraftmakher, Yaakov

    2012-01-01

    The experiments presented show the response of a liquid crystal shutter to applied electric voltages and the delay of the operations. Both properties are important for liquid crystal displays of computers and television sets. Two characteristics of the shutter are determined: (i) the optical transmittance versus applied voltage of various…

  8. Viewing Ice Crystals Using Polarized Light.

    Science.gov (United States)

    Kinsman, E. M.

    1992-01-01

    Describes a method for identifying and examining single ice crystals by photographing a thin sheet of ice placed between two inexpensive polarizing filters. Suggests various natural and prepared sources for ice that promote students' insight into crystal structures, and yield colorful optical displays. Includes directions, precautions, and sample…

  9. Axion Crystals

    CERN Document Server

    Ozaki, Sho

    2016-01-01

    The low-energy effective theories for gapped insulators are classified by three parameters: permittivity $\\epsilon$, permeability $\\mu$, and theta angle $\\theta$. Crystals with periodic $\\epsilon$ are known as photonic crystals. We here study the band structure of photons in a new type of crystals with periodic $\\theta$ (modulo $2\\pi$) in space, which we call the axion crystals. We find that the axion crystals have a number of new properties that the usual photonic crystals do not possess, such as the helicity-dependent photonic band gaps and the nonrelativistic gapless dispersion relation at small momentum. We briefly discuss possible realizations of axion crystals in condensed matter systems as well as high-energy physics.

  10. Crystal Ball Functional Model

    Science.gov (United States)

    Plotnick, David

    2016-09-01

    The A2 collaboration of the MAinz MIkrotron is dedicated to studying meson production and nucleon structure and behavior via photon scattering. The photons are made via bremsstrahlung process and energy-tagged using the Glasgow Photon tagger. The photon beam then interacts in a variety of targets: cryogenic, polarized or solid state, and scattered particles deposit their energy within the NaI crystals. Scintillators are able to give results on particles energy and time. Events are reconstructed by combining information from the Tagging spectrometer, the Crystal Ball detector, the TAPS forward wall spectrometer, a Cherenkov detector, and multi-wire proportional chambers. To better understand the detector and experimental events, a live display was built to show energies deposited in crystals in real-time. In order to show a range of energies and particles, addressable LEDs that are individually programmable were used. To best replicate the Crystal Ball, 3D printing technology was employed to build a similar highly segmented icosahedron that can hold each LED, creating a 3D representation of what photons see during experiments. The LEDs were controlled via Arduino microcontroller. Finally, we implemented the Experimental Physics and Industrial Control System to grab live event data, and a simple program converts this data in to color and crystal number data that is able to communicate with the Arduino. Using these simple parts, we can better visualize and understand the tools used in nuclear physics. This material is based upon work supported by the National Science Foundation Grant No. IIA-1358175.

  11. Tone compatibility between HDR displays

    Science.gov (United States)

    Bist, Cambodge; Cozot, Rémi; Madec, Gérard; Ducloux, Xavier

    2016-09-01

    High Dynamic Range (HDR) is the latest trend in television technology and we expect an in ux of HDR capable consumer TVs in the market. Initial HDR consumer displays will operate on a peak brightness of about 500-1000 nits while in the coming years display peak brightness is expected to go beyond 1000 nits. However, professionally graded HDR content can range from 1000 to 4000 nits. As with Standard Dynamic Range (SDR) content, we can expect HDR content to be available in variety of lighting styles such as low key, medium key and high key video. This raises concerns over tone-compatibility between HDR displays especially when adapting to various lighting styles. It is expected that dynamic range adaptation between HDR displays uses similar techniques as found with tone mapping and tone expansion operators. In this paper, we survey simple tone mapping methods of 4000 nits color-graded HDR content for 1000 nits HDR displays. We also investigate tone expansion strategies when HDR content graded in 1000 nits is displayed on 4000 nits HDR monitors. We conclude that the best tone reproduction technique between HDR displays strongly depends on the lighting style of the content.

  12. Research of 3D display using anamorphic optics

    Science.gov (United States)

    Matsumoto, Kenji; Honda, Toshio

    1997-05-01

    This paper describes the auto-stereoscopic display which can reconstruct more reality and viewer friendly 3-D image by increasing the number of parallaxes and giving motion parallax horizontally. It is difficult to increase number of parallaxes to give motion parallax to the 3-D image without reducing the resolution, because the resolution of display device is insufficient. The magnification and the image formation position can be selected independently in horizontal direction and the vertical direction by projecting between the display device and the 3-D image with the anamorphic optics. The anamorphic optics is an optics system with different magnification in horizontal direction and the vertical direction. It consists of the combination of cylindrical lenses with different focal length. By using this optics, even if we use a dynamic display such as liquid crystal display (LCD), it is possible to display the realistic 3-D image having motion parallax. Motion parallax is obtained by assuming width of the single parallax at the viewing position to be about the same size as the pupil diameter of viewer. In addition, because the focus depth of the 3-D image is deep in this method, conflict of accommodation and convergence is small, and natural 3-D image can be displayed.

  13. Parallax multi-viewer autostereoscopic three-dimensional display

    Science.gov (United States)

    Sha, Lingdao; Schonfeld, Dan; Li, Qun

    2014-03-01

    It is a widely held belief that in the long run, three-dimensional (3D) display should supply stereo to multiple viewers without wearing any viewing aids and free to move. Over the last few decades, great e®orts have been made to approach auto-stereoscopic (AS) display for multiple viewers. Spatial multiplexing technique has ¯rst been employed to accommodate multiple viewers simultaneously in stereoscopic planar display. However, resolution of each view image decreases as the number of viewers increases. Recent development of high-speed liquid crystal display (LCD), which is capable of operating 240-Hz frame rate, makes feasible multi-viewer display via time multiplexing and improving image quality at the same time. In this paper, we propose a display adjustment algorithm that enables high-quality auto-stereoscopic display for multiple viewers. The proposed method relies on spatio-temporal parallax barrier to channel desired stereo pair to corresponding viewers according to their locations. We subsequently conduct simulations that demonstrate the e®ectiveness of the proposed method.

  14. Ten inch Planar Optic Display

    Energy Technology Data Exchange (ETDEWEB)

    Beiser, L. [Beiser (Leo) Inc., Flushing, NY (United States); Veligdan, J. [Brookhaven National Lab., Upton, NY (United States)

    1996-04-01

    A Planar Optic Display (POD) is being built and tested for suitability as a high brightness replacement for the cathode ray tube, (CRT). The POD display technology utilizes a laminated optical waveguide structure which allows a projection type of display to be constructed in a thin (I to 2 inch) housing. Inherent in the optical waveguide is a black cladding matrix which gives the display a black appearance leading to very high contrast. A Digital Micromirror Device, (DMD) from Texas Instruments is used to create video images in conjunction with a 100 milliwatt green solid state laser. An anamorphic optical system is used to inject light into the POD to form a stigmatic image. In addition to the design of the POD screen, we discuss: image formation, image projection, and optical design constraints.

  15. ENERGY STAR Certified Displays - Deprecated

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset is up-to-date but newer better data can be retrieved at: https://data.energystar.gov/dataset/ENERGY-STAR-Certified-Displays/xsyb-v8gs Certified models...

  16. Color speckle in laser displays

    Science.gov (United States)

    Kuroda, Kazuo

    2015-07-01

    At the beginning of this century, lighting technology has been shifted from discharge lamps, fluorescent lamps and electric bulbs to solid-state lighting. Current solid-state lighting is based on the light emitting diodes (LED) technology, but the laser lighting technology is developing rapidly, such as, laser cinema projectors, laser TVs, laser head-up displays, laser head mounted displays, and laser headlamps for motor vehicles. One of the main issues of laser displays is the reduction of speckle noise1). For the monochromatic laser light, speckle is random interference pattern on the image plane (retina for human observer). For laser displays, RGB (red-green-blue) lasers form speckle patterns independently, which results in random distribution of chromaticity, called color speckle2).

  17. Ultraminiature, Micropower Multipurpose Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High information content electronic displays remain the most difficult element of the human-machine interface to effectively miniaturize. Mobile applications need a...

  18. Effective color design for displays

    Science.gov (United States)

    MacDonald, Lindsay W.

    2002-06-01

    Visual communication is a key aspect of human-computer interaction, which contributes to the satisfaction of user and application needs. For effective design of presentations on computer displays, color should be used in conjunction with the other visual variables. The general needs of graphic user interfaces are discussed, followed by five specific tasks with differing criteria for display color specification - advertising, text, information, visualization and imaging.

  19. EVALUATION OF DISTRIBUTION HISTOGRAMS FOR INCREMENT OF CHROMATICITY COORDINATES IN DISPLAY TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    I. O. Zharinov

    2016-05-01

    Full Text Available We consider evaluation problem of chromaticity coordinates increment for an image displayed by indicating means (liquid crystal panels and etc.. Display device profile set by the weight matrix for components of primary colors serves as basic data for quantitative calculation. Research results have the form of mathematical expressions allowing calculation of increment values of chromaticity coordinates of the image displayed on indicating means and histograms of increment distribution.

  20. Performance studies of electrochromic displays

    Science.gov (United States)

    Ionescu, Ciprian; Dobre, Robert Alexandru

    2015-02-01

    The idea of having flexible, very thin, light, low power and even low cost display devices implemented using new materials and technologies is very exciting. Nowadays we can talk about more than just concepts, such devices exist, and they are part of an emerging concept: FOLAE (Flexible Organic and Large Area Electronics). Among the advantages of electrochromic devices are the low power consumption (they are non-emissive, i.e. passive) and the aspect like ink on paper with good viewing angle. Some studies are still necessary for further development, before proper performances are met and the functional behavior can be predicted. This paper presents the results of the research activity conducted to develop electric characterization platform for the organic electronics display devices, especially electrochromic displays, to permit a thorough study. The hardware part of platform permits the measuring of different electric and optical parameters. Charging/discharging a display element presents high interest for optimal driving circuitry. In this sense, the corresponding waveforms are presented. The contrast of the display is also measured for different operation conditions as driving voltage levels and duration. The effect of temperature on electrical and optical parameters (contrast) of the display will be also presented.

  1. Historical halo displays as past weather indicator

    Science.gov (United States)

    Neuhäuser, Dagmar; Neuhäuser, Ralph

    2017-04-01

    Certain halo displays like the 22° circle were known to indicate specific weather pattern since millennia - as specified in Babylonian omina, Aristotle's Meteorology, farmers' weather lore, etc. Today, it is known that halo phenomena are due to refraction and reflection of sun and moon light in ice crystals in cirrus and cirrostratus, so that halo observations do indicate atmospheric conditions like temperature, humidity, pressure etc. in a few km height. The Astronomical Diaries of Babylonia have recorded both halo phenomena (circles, parhelia, etc.) and weather conditions (rain, clouds, etc.), so that we can use them to show statistically, whether, which and how fast halo phenomena are related to weather - for the last few centuries BC for Babylonia. We can then also compare the observations of Babylonian priests in the given BC epoch (without air and light pollution) with the last few decades of the modern epoch (with air and light pollution), where amateur halo observers have systematically recorded such phenomena (in Europe). Weather and climate are known to be partly driven by solar activity. Hence, one could also consider whether there is an indirect relation between halo displays as weather proxy and aurorae as solar activity proxy - if low solar activity leads to low pressure systems, one could expect more halos, preliminary studies show such a hint. For the last few decades, we have many halo observations, satellite imaging of the aurora oval, and many data on solar activity. A statistically sufficient amount of aurora and halo observations should be available for the historic time to investigate such a possible connection: halos were recorded very often in antiquity and the medieval times (as found in chronicles etc.), and modern scholarly catalogs of aurorae also often contain unrecognized halo displays.

  2. SOLIDFELIX: a transportable 3D static volume display

    Science.gov (United States)

    Langhans, Knut; Kreft, Alexander; Wörden, Henrik Tom

    2009-02-01

    Flat 2D screens cannot display complex 3D structures without the usage of different slices of the 3D model. Volumetric displays like the "FELIX 3D-Displays" can solve the problem. They provide space-filling images and are characterized by "multi-viewer" and "all-round view" capabilities without requiring cumbersome goggles. In the past many scientists tried to develop similar 3D displays. Our paper includes an overview from 1912 up to today. During several years of investigations on swept volume displays within the "FELIX 3D-Projekt" we learned about some significant disadvantages of rotating screens, for example hidden zones. For this reason the FELIX-Team started investigations also in the area of static volume displays. Within three years of research on our 3D static volume display at a normal high school in Germany we were able to achieve considerable results despite minor funding resources within this non-commercial group. Core element of our setup is the display volume which consists of a cubic transparent material (crystal, glass, or polymers doped with special ions, mainly from the rare earth group or other fluorescent materials). We focused our investigations on one frequency, two step upconversion (OFTS-UC) and two frequency, two step upconversion (TFTSUC) with IR-Lasers as excitation source. Our main interest was both to find an appropriate material and an appropriate doping for the display volume. Early experiments were carried out with CaF2 and YLiF4 crystals doped with 0.5 mol% Er3+-ions which were excited in order to create a volumetric pixel (voxel). In addition to that the crystals are limited to a very small size which is the reason why we later investigated on heavy metal fluoride glasses which are easier to produce in large sizes. Currently we are using a ZBLAN glass belonging to the mentioned group and making it possible to increase both the display volume and the brightness of the images significantly. Although, our display is currently

  3. RNA Crystallization

    Science.gov (United States)

    Golden, Barbara L.; Kundrot, Craig E.

    2003-01-01

    RNA molecules may be crystallized using variations of the methods developed for protein crystallography. As the technology has become available to syntheisize and purify RNA molecules in the quantities and with the quality that is required for crystallography, the field of RNA structure has exploded. The first consideration when crystallizing an RNA is the sequence, which may be varied in a rational way to enhance crystallizability or prevent formation of alternate structures. Once a sequence has been designed, the RNA may be synthesized chemically by solid-state synthesis, or it may be produced enzymatically using RNA polymerase and an appropriate DNA template. Purification of milligram quantities of RNA can be accomplished by HPLC or gel electrophoresis. As with proteins, crystallization of RNA is usually accomplished by vapor diffusion techniques. There are several considerations that are either unique to RNA crystallization or more important for RNA crystallization. Techniques for design, synthesis, purification, and crystallization of RNAs will be reviewed here.

  4. Protein Crystallization

    Science.gov (United States)

    Chernov, Alexander A.

    2005-01-01

    Nucleation, growth and perfection of protein crystals will be overviewed along with crystal mechanical properties. The knowledge is based on experiments using optical and force crystals behave similar to inorganic crystals, though with a difference in orders of magnitude in growing parameters. For example, the low incorporation rate of large biomolecules requires up to 100 times larger supersaturation to grow protein, rather than inorganic crystals. Nucleation is often poorly reproducible, partly because of turbulence accompanying the mixing of precipitant with protein solution. Light scattering reveals fluctuations of molecular cluster size, its growth, surface energies and increased clustering as protein ages. Growth most often occurs layer-by-layer resulting in faceted crystals. New molecular layer on crystal face is terminated by a step where molecular incorporation occurs. Quantitative data on the incorporation rate will be discussed. Rounded crystals with molecularly disordered interfaces will be explained. Defects in crystals compromise the x-ray diffraction resolution crucially needed to find the 3D atomic structure of biomolecules. The defects are immobile so that birth defects stay forever. All lattice defects known for inorganics are revealed in protein crystals. Contribution of molecular conformations to lattice disorder is important, but not studied. This contribution may be enhanced by stress field from other defects. Homologous impurities (e.g., dimers, acetylated molecules) are trapped more willingly by a growing crystal than foreign protein impurities. The trapped impurities induce internal stress eliminated in crystals exceeding a critical size (part of mni for ferritin, lysozyme). Lesser impurities are trapped from stagnant, as compared to the flowing, solution. Freezing may induce much more defects unless quickly amorphysizing intracrystalline water.

  5. Computational crystallization.

    Science.gov (United States)

    Altan, Irem; Charbonneau, Patrick; Snell, Edward H

    2016-07-15

    Crystallization is a key step in macromolecular structure determination by crystallography. While a robust theoretical treatment of the process is available, due to the complexity of the system, the experimental process is still largely one of trial and error. In this article, efforts in the field are discussed together with a theoretical underpinning using a solubility phase diagram. Prior knowledge has been used to develop tools that computationally predict the crystallization outcome and define mutational approaches that enhance the likelihood of crystallization. For the most part these tools are based on binary outcomes (crystal or no crystal), and the full information contained in an assembly of crystallization screening experiments is lost. The potential of this additional information is illustrated by examples where new biological knowledge can be obtained and where a target can be sub-categorized to predict which class of reagents provides the crystallization driving force. Computational analysis of crystallization requires complete and correctly formatted data. While massive crystallization screening efforts are under way, the data available from many of these studies are sparse. The potential for this data and the steps needed to realize this potential are discussed.

  6. The sweet world of liquid crystals : the synthesis of non-amphiphilic carbohydrate-derived liquid crystals

    NARCIS (Netherlands)

    Smits, Elly

    1998-01-01

    The research in carbohydrate-derived liquid crystals was initiated by a review article by Jeffrey in 1986. This is rather late if one considers that the research on liquid crystals underwent a revival already in the 1960s after the discovery of the liquid crystal display (LCD). Carbohydrates were de

  7. The sweet world of liquid crystals : The synthesis of non-amphiphilic carbohydrate-derived liquid crystals

    NARCIS (Netherlands)

    Smits, E

    1998-01-01

    The research in carbohydrate-derived liquid crystals was initiated by a review article by Jeffrey in 1986. This is rather late if one considers that the research on liquid crystals underwent a revival already in the 1960s after the discovery of the liquid crystal display (LCD). Carbohydrates were de

  8. The VLT Real Time Display

    Science.gov (United States)

    Herlin, T.; Brighton, A.; Biereichel, P.

    The VLT Real-Time Display (RTD) software was developed in order to support image display in real-time, providing a tool for users to display video like images from a camera or detector as fast as possible on an X-Server. The RTD software is implemented as a package providing a Tcl/Tk image widget written in C++ and an independent image handling library and can be used as a building block, adding display capabilities to dedicated VLT control applications. The RTD widget provides basic image display functionality like: panning, zooming, color scaling, colormaps, intensity changes, pixel query, overlaying of line graphics. A large set of assisting widgets, e.g., colorbar, zoom window, spectrum plot are provided to enable the building of image applications. The support for real-time is provided by an RTD image event mechanism used for camera or detector subsystems to pass images to the RTD widget. Image data are passed efficiently via shared memory. This paper describes the architecture of the RTD software and summarizes the features provided by RTD.

  9. Phosphors for flat panel emissive displays

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, M.T.; Walko, R.J.; Phillips, M.L.F.

    1995-07-01

    An overview of emissive display technologies is presented. Display types briefly described include: cathode ray tubes (CRTs), field emission displays (FEDs), electroluminescent displays (ELDs), and plasma display panels (PDPs). The critical role of phosphors in further development of the latter three flat panel emissive display technologies is outlined. The need for stable, efficient red, green, and blue phosphors for RGB fall color displays is emphasized.

  10. Liquid crystal dimers

    CERN Document Server

    Kumar Pal, Santanu

    2017-01-01

    This book covers in-depth discussion of design principles, synthesis and thermal behavior of all types of liquid crystal (LC) dimers. The text presents recent advances in the field of LC dimers consisting of different mesogenic units such as calamitic, discotic and bent-core molecules. It starts with a chapter on the introduction of liquid crystal dimers, including their odd-even behavior, basic classification of dimers and common mesophases in dimers. The text shows how the molecular architectures are being used to develop new materials to study a range of interesting phenomena such as the biaxial nematic phase containing rod-like and disc-like mesogenic units. Finally, the text presents perspectives related to technological relevance of these dimers such as dopants in LC display mixtures exhibiting faster relaxation time, strong flexoelectric coupling and others to effect control over the properties of these materials.

  11. Crystal Data

    Science.gov (United States)

    SRD 3 NIST Crystal Data (PC database for purchase)   NIST Crystal Data contains chemical, physical, and crystallographic information useful to characterize more than 237,671 inorganic and organic crystalline materials. The data include the standard cell parameters, cell volume, space group number and symbol, calculated density, chemical formula, chemical name, and classification by chemical type.

  12. Crystal Ball Replica

    Science.gov (United States)

    Ajamian, John

    2016-09-01

    The A2 collaboration of the Institute for Nuclear Physics of Johannes Gutenberg University performs research on (multiple) meson photoproduction and nucleon structure and dynamics using a high energy polarized photon beam at specific targets. Particles scattered from the target are detected in the Crystal Ball, or CB. The CB is composed of 672 NaI crystals that surround the target and can analyze particle type and energy of ejected particles. Our project was to create a replica of the CB that could display what was happening in real time on a 3 Dimensional scale replica. Our replica was constructed to help explain the physics to the general public, be used as a tool when calibrating each of the 672 NaI crystals, and to better analyze the electron showering of particles coming from the target. This poster will focus on the hardware steps necessary to construct the replica and wire the 672 programmable LEDS in such a way that they can be mapped to correspond to the Crystal Ball elements. George Washington NSF Grant.

  13. BES Monitoring & Displaying System

    Institute of Scientific and Technical Information of China (English)

    MengWANG; BingyunZHANG; 等

    2001-01-01

    BES1 Monitoring & Displaying System(BESMDS)is projected to monitor and display the running status of DAQ and Slow Control systems of BES through the Web for worldwide accessing.It provides a real-time remote means of monitoring as well as an approach to study the environmental influence upon physical data taking.The system collects real-time data separately from BES online subsystems by network sockets and stores the data into a database.People can access the system through its web site.which retrieves data on request from the database and can display results in dynamically created images.Its web address in http:// besmds,ihep.ac.cn/

  14. Engineering antibodies by yeast display.

    Science.gov (United States)

    Boder, Eric T; Raeeszadeh-Sarmazdeh, Maryam; Price, J Vincent

    2012-10-15

    Since its first application to antibody engineering 15 years ago, yeast display technology has been developed into a highly potent tool for both affinity maturing lead molecules and isolating novel antibodies and antibody-like species. Robust approaches to the creation of diversity, construction of yeast libraries, and library screening or selection have been elaborated, improving the quality of engineered molecules and certainty of success in an antibody engineering campaign and positioning yeast display as one of the premier antibody engineering technologies currently in use. Here, we summarize the history of antibody engineering by yeast surface display, approaches used in its application, and a number of examples highlighting the utility of this method for antibody engineering.

  15. PROGRAMMABLE DISPLAY PUSHBUTTON LEGEND EDITOR

    Science.gov (United States)

    Busquets, A. M.

    1994-01-01

    The Programmable Display Pushbutton (PDP) is a pushbutton device available from Micro Switch which has a programmable 16 x 35 matrix of LEDs on the pushbutton surface. Any desired legends can be displayed on the PDPs, producing user-friendly applications which greatly reduce the need for dedicated manual controls. Because the PDP can interact with the operator, it can call for the correct response before transmitting its next message. It is both a simple manual control and a sophisticated programmable link between the operator and the host system. The Programmable Display Pushbutton Legend Editor, PDPE, is used to create the LED displays for the pushbuttons. PDPE encodes PDP control commands and legend data into message byte strings sent to a Logic Refresh and Control Unit (LRCU). The LRCU serves as the driver for a set of four PDPs. The legend editor (PDPE) transmits to the LRCU user specified commands that control what is displayed on the LED face of the individual pushbuttons. Upon receiving a command, the LRCU transmits an acknowledgement that the message was received and executed successfully. The user then observes the effect of the command on the PDP displays and decides whether or not to send the byte code of the message to a data file so that it may be called by an applications program. The PDPE program is written in FORTRAN for interactive execution. It was developed on a DEC VAX 11/780 under VMS. It has a central memory requirement of approximately 12800 bytes. It requires four Micro Switch PDPs and two RS-232 VAX 11/780 terminal ports. The PDPE program was developed in 1985.

  16. Computational multi-projection display.

    Science.gov (United States)

    Moon, Seokil; Park, Soon-Gi; Lee, Chang-Kun; Cho, Jaebum; Lee, Seungjae; Lee, Byoungho

    2016-04-18

    A computational multi-projection display is proposed by employing a multi-projection system combining with compressive light field displays. By modulating the intensity of light rays from a spatial light modulator inside a single projector, the proposed system can offer several compact views to observer. Since light rays are spread to all directions, the system can provide flexible positioning of viewpoints without stacking projectors in vertical direction. Also, if the system is constructed properly, it is possible to generate view images with inter-pupillary gap and satisfy the super multi-view condition. We explain the principle of the proposed system and verify its feasibility with simulations and experimental results.

  17. Controlling Power Consumption for Displays With Backlight Dimming

    DEFF Research Database (Denmark)

    Mantel, Claire; Burini, Nino; Nadernejad, Ehsan

    2013-01-01

    Backlight dimming of Liquid Crystal Displays (LCD) is a technology which aims at saving power and improving visual quality. The evolution of energy standards and the increasing public expectations regarding power consumption have made it necessary for backlight systems to manage their power....... Such a control is challenging to implement, because for LCD displays quality and power are closely interlinked, and one cannot be modified without affecting the other. To address this issue, we present a framework for power controlled backlight dimming defining some key concepts. Two methods to obtain backlights...... with a predefined power level for images are presented: one method has low complexity and the other achieves high performance in terms of quality/power trade-off. Those methods are evaluated on a modeled Light-Emitting Diode edge-lit backlight display. The high-performance method performs significantly better than...

  18. Display standards for commercial flight decks

    Science.gov (United States)

    Lamberth, Larry S.; Penn, Cecil W.

    1994-06-01

    SAE display standards are used as guidelines for certifying commercial airborne electronic displays. The SAE document generation structure and approval process is described. The SAE committees that generate display standards are described. Three SAE documents covering flat panel displays (AS-8034, ARP-4256, and ARP-4260) are discussed with their current status. Head-Up Display documents are also in work.

  19. Origin and use of crystallization phase diagrams.

    Science.gov (United States)

    Rupp, Bernhard

    2015-03-01

    Crystallization phase diagrams are frequently used to conceptualize the phase relations and also the processes taking place during the crystallization of macromolecules. While a great deal of freedom is given in crystallization phase diagrams owing to a lack of specific knowledge about the actual phase boundaries and phase equilibria, crucial fundamental features of phase diagrams can be derived from thermodynamic first principles. Consequently, there are limits to what can be reasonably displayed in a phase diagram, and imagination may start to conflict with thermodynamic realities. Here, the commonly used `crystallization phase diagrams' are derived from thermodynamic excess properties and their limitations and appropriate use is discussed.

  20. Macromolecular crystallization and crystal perfection

    CERN Document Server

    Chayen, Naomi E; Snell, Edward H

    2010-01-01

    Structural biology is key to our understanding of the mechanisms of biological processes. This text describes current methods and future frontiers in crystal growth and use of X-ray and neutron crystallography, in the context of automation of crystallization and generation of synchrotron X-ray and neutron beams.

  1. Display Apple M7649Zm

    CERN Multimedia

    2001-01-01

    It was Designed for the Power Mac G4. This Apple studio display gives you edge-to-edge distortion-free images. With more than 16.7 million colors and 1,280 x 1,024 dpi resolution, you view brilliant and bright images on this Apple 17-inch monitor.

  2. Book Display as Adult Service.

    Science.gov (United States)

    Moore, Matthew S.

    1997-01-01

    Defines book display as an adult service as choosing and positioning adult books from the library collection to increase their circulation. The author contrasts bookstore arrangement for sales versus library arrangement for access, including contrasting missions, genre grouping, weeding, problems, and dimensions. (Author/LRW)

  3. Real Time Sonic Boom Display

    Science.gov (United States)

    Haering, Ed

    2014-01-01

    This presentation will provide general information about sonic boom mitigation technology to the public in order to supply information to potential partners and licensees. The technology is a combination of flight data, atmospheric data and terrain information implemented into a control room real time display for flight planning. This research is currently being performed and as such, any results and conclusions are ongoing.

  4. Graphics Display of Foreign Scripts.

    Science.gov (United States)

    Abercrombie, John R.

    1987-01-01

    Describes Graphics Project for Foreign Language Learning at the University of Pennsylvania, which has developed ways of displaying foreign scripts on microcomputers. Character design on computer screens is explained; software for graphics, printing, and language instruction is discussed; and a text editor is described that corrects optically…

  5. Verbal Modification via Visual Display

    Science.gov (United States)

    Richmond, Edmun B.; Wallace-Childers, La Donna

    1977-01-01

    The inability of foreign language students to produce acceptable approximations of new vowel sounds initiated a study to devise a real-time visual display system whereby the students could match vowel production to a visual pedagogical model. The system used amateur radio equipment and a standard oscilloscope. (CHK)

  6. Colour displays for categorical images

    NARCIS (Netherlands)

    Glasbey, C.; Heijden, van der G.W.A.M.; Toh, V.F.K.; Gray, A.J.

    2007-01-01

    We propose a method for identifying a set of colours for displaying 2D and 3D categorical images when the categories are unordered labels. The principle is to find maximally distinct sets of colours. We either generate colours sequentially, to maximize the dissimilarity or distance between a new col

  7. Autostereoscopic display with eye tracking

    Science.gov (United States)

    Tomono, Takao; Hoon, Kyung; Ha, Yong Soo; Kim, Sung-Sik; Son, Jung-Young

    2002-05-01

    Auto-stereoscopic 21-inch display with eye tracking having wide viewing zone and bright image was fabricated. The image of display is projected to retinal through several optical components. We calculated optical system for wider viewing zone by using Inverse-Ray Trace Method. The viewing zone of first model is 155mm (theoretical value: 161mm). We could widen viewing zone by controlling paraxial radius of curvature of spherical mirror, the distance between lenses and so on. The viewing zone of second model is 208mm. We used two spherical mirrors to obtain twice brightness. We applied eye-tracking system to the display system. Eye recognition is based on neural network card based on ZICS technology. We fabricated Auto-stereoscopic 21-inch display with eye tracking. We measured viewing zone based on illumination area. The viewing zone was 206mm, which was close to theoretical value. We could get twice brightness also. We could see 3D image according to position without headgear.

  8. GridOrbit public display

    DEFF Research Database (Denmark)

    Ramos, Juan David Hincapie; Tabard, Aurélien; Bardram, Jakob

    2010-01-01

    We introduce GridOrbit, a public awareness display that visualizes the activity of a community grid used in a biology laboratory. This community grid executes bioin-formatics algorithms and relies on users to donate CPU cycles to the grid. The goal of GridOrbit is to create a shared awareness about...

  9. Information retrieval and display system

    Science.gov (United States)

    Groover, J. L.; King, W. L.

    1977-01-01

    Versatile command-driven data management system offers users, through simplified command language, a means of storing and searching data files, sorting data files into specified orders, performing simple or complex computations, effecting file updates, and printing or displaying output data. Commands are simple to use and flexible enough to meet most data management requirements.

  10. Liquid crystal tunable photonic crystal dye laser

    DEFF Research Database (Denmark)

    Buss, Thomas; Christiansen, Mads Brøkner; Smith, Cameron

    2010-01-01

    We present a dye-doped liquid crystal laser using a photonic crystal cavity. An applied electric field to the liquid crystal provides wavelength tunability. The photonic crystal enhances resonant interaction with the gain medium....

  11. Display Sharing: An Alternative Paradigm

    Science.gov (United States)

    Brown, Michael A.

    2010-01-01

    The current Johnson Space Center (JSC) Mission Control Center (MCC) Video Transport System (VTS) provides flight controllers and management the ability to meld raw video from various sources with telemetry to improve situational awareness. However, maintaining a separate infrastructure for video delivery and integration of video content with data adds significant complexity and cost to the system. When considering alternative architectures for a VTS, the current system's ability to share specific computer displays in their entirety to other locations, such as large projector systems, flight control rooms, and back supporting rooms throughout the facilities and centers must be incorporated into any new architecture. Internet Protocol (IP)-based systems also support video delivery and integration. IP-based systems generally have an advantage in terms of cost and maintainability. Although IP-based systems are versatile, the task of sharing a computer display from one workstation to another can be time consuming for an end-user and inconvenient to administer at a system level. The objective of this paper is to present a prototype display sharing enterprise solution. Display sharing is a system which delivers image sharing across the LAN while simultaneously managing bandwidth, supporting encryption, enabling recovery and resynchronization following a loss of signal, and, minimizing latency. Additional critical elements will include image scaling support, multi -sharing, ease of initial integration and configuration, integration with desktop window managers, collaboration tools, host and recipient controls. This goal of this paper is to summarize the various elements of an IP-based display sharing system that can be used in today's control center environment.

  12. An Evaluation of Performance Characteristics of Primary Display Devices.

    Science.gov (United States)

    Ekpo, Ernest U; McEntee, Mark F

    2016-04-01

    The aim of this study was to complete a full evaluation of the new EIZO RX850 liquid crystal display and compare it to two currently used medical displays in Australia (EIZO GS510 and Barco MDCG 5121). The American Association of Physicists in Medicine (AAPM) Task Group 18 Quality Control test pattern was used to assess the performance of three high-resolution primary medical displays: EIZO RX850, EIZO GS510, and Barco MDCG 5121. A Konica Minolta spectroradiometer (CS-2000) was used to assess luminance response, non-uniformity, veiling glare, and color uniformity. Qualitative evaluation of noise was also performed. Seven breast lesions were displayed on each monitor and photographed with a calibrated 5.5-MP Olympus E-1 digital SLR camera. ImageJ software was used to sample pixel information from each lesion and surrounding background to calculate their conspicuity index on each of the displays. All monitor fulfilled all AAPM acceptance criteria. The performance characteristics for EIZO RX850, Barco MDCG 5121, and EIZO GS510 respectively were as follows: maximum luminance (490, 500.5, and 413 cd/m(2)), minimum luminance (0.724, 1.170, and 0.92 cd/m(2)), contrast ratio (675:1, 428:1, 449:1), just-noticeable difference index (635, 622, 609), non-uniformity (20, 5.92, and 8.5 %), veiling glare (GR = 2465.6, 720.4, 1249.8), and color uniformity (Δu'v' = +0.003, +0.002, +0.002). All monitors demonstrated low noise levels. The conspicuity index (χ) of the lesions was slightly higher in the EIZO RX850 display. All medical displays fulfilled AAPM performance criteria, and performance characteristics of EIZO RX850 are equal to or better than those of the Barco MDCG 5121 and EIZO GS510 displays.

  13. Crystal Dislocations

    Directory of Open Access Journals (Sweden)

    Ronald W. Armstrong

    2016-01-01

    Full Text Available Crystal dislocations were invisible until the mid-20th century although their presence had been inferred; the atomic and molecular scale dimensions had prevented earlier discovery. Now they are normally known to be just about everywhere, for example, in the softest molecularly-bonded crystals as well as within the hardest covalently-bonded diamonds. The advent of advanced techniques of atomic-scale probing has facilitated modern observations of dislocations in every crystal structure-type, particularly by X-ray diffraction topography and transmission electron microscopy. The present Special Issue provides a flavor of their ubiquitous presences, their characterizations and, especially, their influence on mechanical and electrical properties.

  14. IR Sensor Synchronizing Active Shutter Glasses for 3D HDTV with Flexible Liquid Crystal Lenses

    OpenAIRE

    Jeong In Han

    2013-01-01

    IR sensor synchronizing active shutter glasses for three-dimensional high definition television (3D HDTV) were developed using a flexible liquid crystal (FLC) lens. The FLC lens was made on a polycarbonate (PC) substrate using conventional liquid crystal display (LCD) processes. The flexible liquid crystal lens displayed a maximum transmission of 32% and total response time of 2.56 ms. The transmittance, the contrast ratio and the response time of the flexible liquid crystal lens were superio...

  15. Displays for future intermediate UAV

    Science.gov (United States)

    Desjardins, Daniel; Metzler, James; Blakesley, David; Rister, Courtney; Nuhu, Abdul-Razak

    2008-04-01

    The Dedicated Autonomous Extended Duration Airborne Long-range Utility System (DAEDALUS) is a prototype Unmanned Aerial Vehicle (UAV) that won the 2007 AFRL Commander's Challenge. The purpose of the Commander's Challenge was to find an innovative solution to urgent warfighter needs by designing a UAV with increased persistence for tactical employment of sensors and communication systems. DAEDALUS was chosen as a winning prototype by AFRL, AFMC and SECAF. Follow-on units are intended to fill an intermediate role between currently fielded Tier I and Tier II UAV's. The UAV design discussed in this paper, including sensors and displays, will enter Phase II for Rapid Prototype Development with the intent of developing the design for eventual production. This paper will discuss the DAEDALUS UAV prototype system, with particular focus on its communications, to include the infrared sensor and electro-optical camera, but also displays, specifically man-portable.

  16. Characterization of the rotating display.

    Science.gov (United States)

    Keyes, J W; Fahey, F H; Harkness, B A; Eggli, D F; Balseiro, J; Ziessman, H A

    1988-09-01

    The rotating display is a useful method for reviewing single photon emission computed tomography (SPECT) data. This study evaluated the requirements for a subjectively pleasing and useful implementation of this technique. Twelve SPECT data sets were modified and viewed by several observers who recorded the minimum framing rates for apparent smooth rotation, 3D effect, effects of image size, and other parameters. The results showed that a minimum of 16 frames was needed for a useful display. Smaller image sizes and more frames were preferred. The recommended minimal framing rate for a 64-frame study is 16-17 frames per second and for a 32-frame study, 12-13 frames per second. Other enhancements also were useful.

  17. Interactive display of polygonal data

    Energy Technology Data Exchange (ETDEWEB)

    Wood, P.M.

    1977-10-01

    Interactive computer graphics is an excellent approach to many types of applications. It is an exciting method of doing geographic analysis when desiring to rapidly examine existing geographically related data or to display specially prepared data and base maps for publication. One such program is the interactive thematic mapping system called CARTE, which combines polygonal base maps with statistical data to produce shaded maps using a variety of shading symbolisms on a variety of output devices. A polygonal base map is one where geographic entities are described by points, lines, or polygons. It is combined with geocoded data to produce special subject or thematic maps. Shading symbolisms include texture shading for areas, varying widths for lines, and scaled symbols for points. Output devices include refresh and storage CRTs and auxiliary Calcomp or COM hardcopy. The system is designed to aid in the quick display of spatial data and in detailed map design.

  18. Game engines and immersive displays

    Science.gov (United States)

    Chang, Benjamin; Destefano, Marc

    2014-02-01

    While virtual reality and digital games share many core technologies, the programming environments, toolkits, and workflows for developing games and VR environments are often distinct. VR toolkits designed for applications in visualization and simulation often have a different feature set or design philosophy than game engines, while popular game engines often lack support for VR hardware. Extending a game engine to support systems such as the CAVE gives developers a unified development environment and the ability to easily port projects, but involves challenges beyond just adding stereo 3D visuals. In this paper we outline the issues involved in adapting a game engine for use with an immersive display system including stereoscopy, tracking, and clustering, and present example implementation details using Unity3D. We discuss application development and workflow approaches including camera management, rendering synchronization, GUI design, and issues specific to Unity3D, and present examples of projects created for a multi-wall, clustered, stereoscopic display.

  19. Proof nets for display logic

    CERN Document Server

    Moot, Richard

    2007-01-01

    This paper explores several extensions of proof nets for the Lambek calculus in order to handle the different connectives of display logic in a natural way. The new proof net calculus handles some recent additions to the Lambek vocabulary such as Galois connections and Grishin interactions. It concludes with an exploration of the generative capacity of the Lambek-Grishin calculus, presenting an embedding of lexicalized tree adjoining grammars into the Lambek-Grishin calculus.

  20. Modern Display Technologies and Applications

    Science.gov (United States)

    1982-01-01

    conventional tubes, LSI circuitry offers the possibility of correcting some of the deficiencies in electron-optic perform- ance and may lead to acceptable...certain ceramic materials such as PLZT (lead lanthanum zirconate titanate) can be utilized for display applications. PLZT is transparent in the visible...consuming power (3.8.12). 3.8.4.2 State of development, Magnetic particles have been made of polyethylene with powdered Strontium ferrite as a filler

  1. Striations in Plasma Display Panel

    Institute of Scientific and Technical Information of China (English)

    OUYANG Ji-Ting; CAO Jing; MIAO Jin-Song

    2005-01-01

    @@ The phenomenon of striation has been investigated experimentally in a macroscopic ac-plasma display panel (PDP). The relationship between the characteristics of striation and the operation conditions including voltage, frequency, rib, and electrode configuration, etc is obtained experimentally. The origin of the striations is considered to be the ionization waves in the transient positive column near the dielectric surface in the anode area during the discharge, and the perturbation is caused by resonance kinetic effects in inert gas.

  2. Multiview synthesis for autostereoscopic displays

    Science.gov (United States)

    Dane, Gökçe.; Bhaskaran, Vasudev

    2013-09-01

    Autostereoscopic (AS) displays spatially multiplex multiple views, providing a more immersive experience by enabling users to view the content from different angles without the need of 3D glasses. Multiple views could be captured from multiple cameras at different orientations, however this could be expensive, time consuming and not applicable to some applications. The goal of multiview synthesis in this paper is to generate multiple views from a stereo image pair and disparity map by using various video processing techniques including depth/disparity map processing, initial view interpolation, inpainting and post-processing. We specifically emphasize the need for disparity processing when there is no depth information is available that is associated with the 2D data and we propose a segmentation based disparity processing algorithm to improve disparity map. Furthermore we extend the texture based 2D inpainting algorithm to 3D and further improve the hole-filling performance of view synthesis. The benefit of each step of the proposed algorithm is demonstrated with comparison to state of the art algorithms in terms of visual quality and PSNR metric. Our system is evaluated in an end-to-end multi view synthesis framework where only stereo image pair is provided as input to the system and 8 views are outputted and displayed in 8-view Alioscopy AS display.

  3. Analysis of temporal stability of autostereoscopic 3D displays

    Science.gov (United States)

    Rubiño, Manuel; Salas, Carlos; Pozo, Antonio M.; Castro, J. J.; Pérez-Ocón, Francisco

    2013-11-01

    An analysis has been made of the stability of the images generated by electronic autostereoscopic 3D displays, studying the time course of the photometric and colorimetric parameters. The measurements were made on the basis of the procedure recommended in the European guideline EN 61747-6 for the characterization of electronic liquid-crystal displays (LCD). The study uses 3 different models of autostereoscopic 3D displays of different sizes and numbers of pixels, taking the measurements with a spectroradiometer (model PR-670 SpectraScan of PhotoResearch). For each of the displays, the time course is shown for the tristimulus values and the chromaticity coordinates in the XYZ CIE 1931 system and values from the time periods required to reach stable values of these parameters are presented. For the analysis of how the procedure recommended in the guideline EN 61747-6 for 2D displays influenced the results, and for the adaption of the procedure to the characterization of 3D displays, the experimental conditions of the standard procedure were varied, making the stability analysis in the two ocular channels (RE and LE) of the 3D mode and comparing the results with those corresponding to the 2D. The results of our study show that the stabilization time of a autostereoscopic 3D display with parallax barrier technology depends on the tristimulus value analysed (X, Y, Z) as well as on the presentation mode (2D, 3D); furthermore, it was found that whether the 3D mode is used depends on the ocular channel evaluated (RE, LE).

  4. Gestures to Intuitively Control Large Displays

    NARCIS (Netherlands)

    Fikkert, F.W.; Vet, van der P.E.; Rauwerda, H.; Breit, T.; Nijholt, A.; Sales Dias, M.; Gibet, S.; Wanderley, M.W.; Bastos, R.

    2009-01-01

    Large displays are highly suited to support discussions in empirical science. Such displays can display project results on a large digital surface to feed the discussion. This paper describes our approach to closely involve multidisciplinary omics scientists in the design of an intuitive display con

  5. 27 CFR 6.55 - Display service.

    Science.gov (United States)

    2010-04-01

    ... Distribution Service § 6.55 Display service. Industry member reimbursements to retailers for setting up product or other displays constitutes paying the retailer for rendering a display service within the meaning... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Display service. 6.55...

  6. Gold nanoparticle capture within protein crystal scaffolds

    Science.gov (United States)

    Kowalski, Ann E.; Huber, Thaddaus R.; Ni, Thomas W.; Hartje, Luke F.; Appel, Karina L.; Yost, Jarad W.; Ackerson, Christopher J.; Snow, Christopher D.

    2016-06-01

    DNA assemblies have been used to organize inorganic nanoparticles into 3D arrays, with emergent properties arising as a result of nanoparticle spacing and geometry. We report here the use of engineered protein crystals as an alternative approach to biologically mediated assembly of inorganic nanoparticles. The protein crystal's 13 nm diameter pores result in an 80% solvent content and display hexahistidine sequences on their interior. The hexahistidine sequence captures Au25(glutathione)~17 (nitrilotriacetic acid)~1 nanoclusters throughout a chemically crosslinked crystal via the coordination of Ni(ii) to both the cluster and the protein. Nanoparticle loading was validated by confocal microscopy and elemental analysis. The nanoparticles may be released from the crystal by exposure to EDTA, which chelates the Ni(ii) and breaks the specific protein/nanoparticle interaction. The integrity of the protein crystals after crosslinking and nanoparticle capture was confirmed by single crystal X-ray crystallography.DNA assemblies have been used to organize inorganic nanoparticles into 3D arrays, with emergent properties arising as a result of nanoparticle spacing and geometry. We report here the use of engineered protein crystals as an alternative approach to biologically mediated assembly of inorganic nanoparticles. The protein crystal's 13 nm diameter pores result in an 80% solvent content and display hexahistidine sequences on their interior. The hexahistidine sequence captures Au25(glutathione)~17 (nitrilotriacetic acid)~1 nanoclusters throughout a chemically crosslinked crystal via the coordination of Ni(ii) to both the cluster and the protein. Nanoparticle loading was validated by confocal microscopy and elemental analysis. The nanoparticles may be released from the crystal by exposure to EDTA, which chelates the Ni(ii) and breaks the specific protein/nanoparticle interaction. The integrity of the protein crystals after crosslinking and nanoparticle capture was

  7. Liquid Crystals

    Science.gov (United States)

    1990-01-01

    Thermochromic liquid crystals, or TLCs, are a type of liquid crystals that react to changes in temperature by changing color. The Hallcrest/NASA collaboration involved development of a new way to visualize boundary layer transition in flight and in wind tunnel testing of aircraft wing and body surfaces. TLCs offered a new and potentially better method of visualizing the boundary layer transition in flight. Hallcrest provided a liquid crystal formulation technique that afforded great control over the sensitivity of the liquid crystals to varying conditions. Method is of great use to industry, government and universities for aerodynamic and hydrodynamic testing. Company's principal line is temperature indicating devices for industrial use, such as non-destructive testing and flaw detection in electric/electronic systems, medical application, such as diagnostic systems, for retail sale, such as room, refrigerator, baby bath and aquarium thermometers, and for advertising and promotion specials. Additionally, Hallcrest manufactures TLC mixtures for cosmetic applications, and liquid crystal battery tester for Duracell batteries.

  8. Review of Defense Display Research Programs

    Science.gov (United States)

    2001-01-01

    Programs Flat Panel Autostereoscopic N-perspective 3D High Definition DMD Digital Projector Light Piping & Quantum Cavity Displays Solid State Laser...Megapixel Displays • Size Commonality • 67 % Weight Reduction • > 200 sq. in. per Display 20-20 Vision Simulators True 3D , sparse symbols Foldable Display...megapixel 2D and True 3D Display Technology 25M & T3D FY02-FY06 New service thrusts

  9. Recent Trend in Development of Olfactory Displays

    Science.gov (United States)

    Yanagida, Yasuyuki

    An olfactory display is a device that generates scented air with desired concentration of aroma, and delivers it to the user's olfactory organ. In this article, the nature of olfaction is briefly described from the view point of how to configure olfactory displays. Next, component technologies to compose olfactory displays, i.e., making scents and delivering scents, are categorized. Several existing olfactory display systems are introduced to show the current status of research and development of olfactory displays.

  10. Subjective comparison of brightness preservation methods for local backlight dimming displays

    DEFF Research Database (Denmark)

    Korhonen, Jari; Mantel, Claire; Forchhammer, Søren

    2015-01-01

    Local backlight dimming is a popular technology in high quality Liquid Crystal Displays (LCDs). In those displays, the backlight is composed of contributions from several individually adjustable backlight segments, set at different backlight luminance levels in different parts of the screen......, according to the luma of the target image displayed on LCD. Typically, transmittance of the liquid crystal cells (pixels) located in the regions with dimmed backlight is increased in order to preserve their relative brightness with respect to the pixels located in the regions with bright backlight....... There are different methods for brightness preservation for local backlight dimming displays, producing images with different visual characteristics. In this study, we have implemented, analyzed and evaluated several different approaches for brightness preservation, and conducted a subjective study based on rank...

  11. Photonic crystals

    CERN Document Server

    Busch, Kurt; Wehrspohn, Ralf B; Föll, Helmut

    2006-01-01

    The majority of the contributions in this topically edited book stems from the priority program SPP 1113 ""Photonische Kristalle"" run by the Deutsche Forschungsgemeinschaft (DFG), resulting in a survey of the current state of photonic crystal research in Germany. The first part of the book describes methods for the theoretical analysis of their optical properties as well as the results. The main part is dedicated to the fabrication, characterization and modeling of two- and three-dimensional photonic crystals, while the final section presents a wide spectrum of applications: gas sensors, micr

  12. Optical display for radar sensing

    Science.gov (United States)

    Szu, Harold; Hsu, Charles; Willey, Jefferson; Landa, Joseph; Hsieh, Minder; Larsen, Louis V.; Krzywicki, Alan T.; Tran, Binh Q.; Hoekstra, Philip; Dillard, John T.; Krapels, Keith A.; Wardlaw, Michael; Chu, Kai-Dee

    2015-05-01

    Boltzmann headstone S = kB Log W turns out to be the Rosette stone for Greek physics translation optical display of the microwave sensing hieroglyphics. The LHS is the molecular entropy S measuring the degree of uniformity scattering off the sensing cross sections. The RHS is the inverse relationship (equation) predicting the Planck radiation spectral distribution parameterized by the Kelvin temperature T. Use is made of the conservation energy law of the heat capacity of Reservoir (RV) change T Δ S = -ΔE equals to the internal energy change of black box (bb) subsystem. Moreover, an irreversible thermodynamics Δ S > 0 for collision mixing toward totally larger uniformity of heat death, asserted by Boltzmann, that derived the so-called Maxwell-Boltzmann canonical probability. Given the zero boundary condition black box, Planck solved a discrete standing wave eigenstates (equation). Together with the canonical partition function (equation) an average ensemble average of all possible internal energy yielded the celebrated Planck radiation spectral (equation) where the density of states (equation). In summary, given the multispectral sensing data (equation), we applied Lagrange Constraint Neural Network (LCNN) to solve the Blind Sources Separation (BSS) for a set of equivalent bb target temperatures. From the measurements of specific value, slopes and shapes we can fit a set of Kelvin temperatures T's for each bb targets. As a result, we could apply the analytical continuation for each entropy sources along the temperature-unique Planck spectral curves always toward the RGB color temperature display for any sensing probing frequency.

  13. Simulated monitor display for CCTV

    Energy Technology Data Exchange (ETDEWEB)

    Steele, B.J.

    1982-01-01

    Two computer programs have been developed which generate a two-dimensional graphic perspective of the video output produced by a Closed Circuit Television (CCTV) camera. Both programs were primarily written to produce a graphic display simulating the field-of-view (FOV) of a perimeter assessment system as seen on a CCTV monitor. The original program was developed for use on a Tektronix 4054 desktop computer; however, the usefulness of this graphic display program led to the development of a similar program for a Hewlett-Packard 9845B desktop computer. After entry of various input parameters, such as, camera lens and orientation, the programs automatically calculate and graphically plot the locations of various items, e.g., fences, an assessment zone, running men, and intrusion detection sensors. Numerous special effects can be generated to simulate such things as roads, interior walls, or sides of buildings. Other objects can be digitized and entered into permanent memory similar to the running men. With this type of simulated monitor perspective, proposed camera locations with respect to fences and a particular assessment zone can be rapidly evaluated without the costly time delays and expenditures associated with field evaluation.

  14. Lyotropic hexagonal columnar liquid crystals of large colloidal gibbsite platelets

    NARCIS (Netherlands)

    Mourad, M.C.D.; Petukhov, A.V.; Vroege, G.J.; Lekkerkerker, H.N.W.

    2010-01-01

    We report the formation of hexagonal columnar liquid crystal phases in suspensions of large (570 nm diameter), sterically stabilized, colloidal gibbsite platelets in organic solvent. In thin cells these systems display strong iridescence originating from hexagonally arranged columns that are

  15. Quantum Dots for Wide Color Gamut Displays from Photoluminescence to Electroluminescence

    Science.gov (United States)

    Kang, Yongyin; Song, Zhicheng; Jiang, Xiaofang; Yin, Xia; Fang, Long; Gao, Jing; Su, Yehua; Zhao, Fei

    2017-02-01

    Monodisperse quantum dots (QDs) were prepared by low-temperature process. The remarkable narrow emission peak of the QDs helps the liquid crystal displays (LCD) and electroluminescence displays (QD light-emitting diode, QLED) to generate wide color gamut performance. The range of the color gamut for QD light-converting device (QLCD) is controlled by both the QDs and color filters (CFs) in LCD, and for QLED, the optimized color gamut is dominated by QD materials.

  16. Ribbon Crystals

    DEFF Research Database (Denmark)

    Bohr, Jakob; Markvorsen, Steen

    2013-01-01

    A repetitive crystal-like pattern is spontaneously formed upon the twisting of straight ribbons. The pattern is akin to a tessellation with isosceles triangles, and it can easily be demonstrated with ribbons cut from an overhead transparency. We give a general description of developable ribbons...

  17. Therapeutic Crystals

    Science.gov (United States)

    Bond, Charles S.

    2014-01-01

    Some readers might not fully know what the difference is between crystallography, and the "new age" practice of dangling crystals around the body to capitalise on their healing energy. The latter is often considered to be superstition, while ironically, the former has actually resulted in real rationally-based healing of human diseases…

  18. Optimal Backlight Modulation With Crosstalk Control in Stereoscopic Display

    DEFF Research Database (Denmark)

    Jiao, Liangbao; Shu, Xiao; Cheng, Yong

    2014-01-01

    Crosstalk between the left-eye and right-eye images is one of the main artifacts affecting the visual quality of stereoscopic liquid crystal display (LCD) systems. In this paper, a novel technique, called Optimal Backlight Modulation (OBM), is proposed to reduce crosstalk by taking the advantage....... A simple closed-form approximation of the optimization problem can be easily employed and solved in real time on LCD control hardware. Simulation results show that the proposed OBM algorithm provides the same or higher luminance while reducing the crosstalk by 60% compared with the other tested methods....

  19. A faster switching regime for zenithal bistable nematic displays

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, J

    1997-12-01

    A simpler and faster switching regime for Zenithal Bistable Nematic displays is reported. A cell, based on homeotropic alignment of nematic liquid crystal over a continuous blazed monograting on one surface, can be switched using bipolar pulses an order of magnitude faster than monopolar pulses of the same voltage. We propose that this regime relies on simple dielectric coupling to drive the cell into a higher energy state with a long pulse time, and the relaxation into a lower energy state after the creation of surface defects from a shorter applied pulse. Although flexoelectric effects are observed, they do not form the basis of state selection as was proposed for the monopolar pulses

  20. Photonic crystals principles and applications

    CERN Document Server

    Gong, Qihuang

    2013-01-01

    IntroductionPrimary Properties of Photonic CrystalsFabrication of Photonic CrystalsPhotonic Crystal All-Optical SwitchingTunable Photonic Crystal FilterPhotonic Crystal LaserPhotonic Crystal Logic DevicesPhotonic Crystal Sensors

  1. GridOrbit public display

    DEFF Research Database (Denmark)

    Ramos, Juan David Hincapie; Tabard, Aurélien; Bardram, Jakob

    2010-01-01

    We introduce GridOrbit, a public awareness display that visualizes the activity of a community grid used in a biology laboratory. This community grid executes bioin-formatics algorithms and relies on users to donate CPU cycles to the grid. The goal of GridOrbit is to create a shared awareness about...... the research taking place in the biology laboratory. This should promote contribu-tions to the grid, and thereby mediate the appropriation of the grid technology. GridOrbit visualizes the activity in the grid, shows information about the different active projects, and supports a messaging functionality where...... people comment on projects. Our work explores the usage of interactive technologies as enablers for the appropriation of an otherwise invisible infrastructure....

  2. Simplified Night Sky Display System

    Science.gov (United States)

    Castellano, Timothy P.

    2010-01-01

    A document describes a simple night sky display system that is portable, lightweight, and includes, at most, four components in its simplest configuration. The total volume of this system is no more than 10(sup 6) cm(sup 3) in a disassembled state, and weighs no more than 20 kilograms. The four basic components are a computer, a projector, a spherical light-reflecting first surface and mount, and a spherical second surface for display. The computer has temporary or permanent memory that contains at least one signal representing one or more images of a portion of the sky when viewed from an arbitrary position, and at a selected time. The first surface reflector is spherical and receives and reflects the image from the projector onto the second surface, which is shaped like a hemisphere. This system may be used to simulate selected portions of the night sky, preserving the appearance and kinesthetic sense of the celestial sphere surrounding the Earth or any other point in space. These points will then show motions of planets, stars, galaxies, nebulae, and comets that are visible from that position. The images may be motionless, or move with the passage of time. The array of images presented, and vantage points in space, are limited only by the computer software that is available, or can be developed. An optional approach is to have the screen (second surface) self-inflate by means of gas within the enclosed volume, and then self-regulate that gas in order to support itself without any other mechanical support.

  3. Enhanced spatial-state feedback for night-vision goggle displays

    Science.gov (United States)

    Bachelder, Edward N.; Hansman, R. John, Jr.

    1997-06-01

    A preliminary study was conducted to investigate the use of visual flow cues as an aid to ground and vertical drift awareness during helicopter flight and targeting while using night vision goggles (NVGs). Three displays wee compared: (1) NVG display: simulated NVG image of cockpit and external environment. (2) Overlay display: NVG image with an overlay display but with symbology flow cue field and a surrounding wire-frame globe; (3) Cut-out display: same as the overlay display but with symbology removed from the central region. Three levels of contrast were also compared using each display type. The visual scenery was displayed to subjects using a helmet-mounted virtual reality device that had a 40 by 50 degree field-of-view liquid crystal display. The study involved six pilots. Three tasks were given: (1) Search task: designate enemy targets with a helmet-mounted sight; (2) Hover task: null out all transnational and yaw rates while in a hover; (3) Search/Hover task: perform both Search and Hover tasks simultaneously. These tasks were conducted in a fixed-based helicopter simulator which used the dynamics of a small-scale model helicopter. The following performance measures were collected: (1) Pilot ability to detect and recognize targets; (2) Pilots ability to null transnational and yaw rates; (3) Time scanning the instrument panel. Subjects also rated displays for efficacy in completing the three tasks. Target detection scores conducted during the Search and Search/Hover tasks were highest using the NVG display, followed by the cut-out display. Root-mean-square (RMS) drift rate error was comparable for all display types in the Hover and Hover/Search tasks, however RMS control input activity in all the translational axes was significantly higher in both rate-cueing displays than with the NVG display. From the control input and drift rate time histories it appears that the motion cues were more compelling in the overlay and cut- out displays than those perceived

  4. ProPath Display Process Overview

    Data.gov (United States)

    Department of Veterans Affairs — This API displays an overview of the process including the description, goals, associated roles (linked to their detailed information). It also displays all of the...

  5. Holographic Waveguided See-Through Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for lightweight, space suit-mounted displays, Luminit proposes a novel Holographic Waveguided See-Through Display. Our proposed Holographic...

  6. Projection/Reflection Heads-up Display

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for an EVA information display device, Physical Optics Corporation (POC) proposes to develop a new Projection/Reflection Heads-up Display...

  7. OZ: An Innovative Primary Flight Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed SBIR project will develop OZ, an innovative primary flight display for aircraft. The OZ display, designed from "first principles" of vision science,...

  8. Crystal growth and magnetic property of YFeO3 crystal

    Indian Academy of Sciences (India)

    Anhua Wu; Hui Shen; Jun Xu; Zhanliang Wang; Linwen Jiang; Liqing Luo; Shujuan Yuan; Shixun Cao; Huaijin Zhang

    2012-04-01

    YFeO3 and other rare earth substituted crystals with distorted orthorhombic pervoskite-like structure (space group, ) have attracted much attention due to their remarkable magnetic properties of primary significance for technological applications. In the present work, the floating zone growth of YFeO3 crystals has been systematically investigated and high quality YFeO3 crystal was obtained by optimized process. The magnetic properties of YFeO3 crystal were investigated, and it indicated the high magneto-optical property in YFeO3 crystals with specific orientation due to its anisotropy. YFeO3 crystals display superior performance in the application magneto-optical current sensors and fast latching optical switches.

  9. See-through multi-view 3D display with parallax barrier

    Science.gov (United States)

    Hong, Jong-Young; Lee, Chang-Kun; Park, Soon-gi; Kim, Jonghyun; Cha, Kyung-Hoon; Kang, Ki Hyung; Lee, Byoungho

    2016-03-01

    In this paper, we propose the see-through parallax barrier type multi-view display with transparent liquid crystal display (LCD). The transparency of LCD is realized by detaching the backlight unit. The number of views in the proposed system is minimized to enlarge the aperture size of parallax barrier, which determines the transparency. For compensating the shortness of the number of viewpoints, eye tracking method is applied to provide large number of views and vertical parallax. Through experiments, a prototype of see-through autostereoscopic 3D display with parallax barrier is implemented, and the system parameters of transmittance, crosstalk, and barrier structure perception are analyzed.

  10. Emerging Large-Screen Display Technology

    Science.gov (United States)

    1992-11-01

    1255, Santa Clara, CA. 25. Williams, R. D., and F. Garcia, 1988, "A Real Time Autostereoscopic Multiplanar 3D Display System," Society for Information...K. Miyaji, 1989, " 3D Display using Laser and Moving Screen, Japan Display 1989, Paper P3-5. 27. Sterling, R. D., R. D. TeKolste, J. M. Haggerty, T. C

  11. Microfluidics for electronic paper-like displays

    NARCIS (Netherlands)

    Shui, Lingling; Hayes, Robert A.; Jin, Mingliang; Zhang, X.; Zhang, Xiao; Bai, Pengfei; van den Berg, Albert; Zhou, Guofu

    2014-01-01

    Displays are ubiquitous in modern life, and there is a growing need to develop active, full color, video-rate reflective displays that perform well in high-light conditions. The core of display technology is to generate or manipulate light in the visible wavelength. Colored fluids or fluids with

  12. Data Display Markup Language (DDML) Handbook

    Science.gov (United States)

    2017-01-31

    Moreover, the tendency of T&E is towards a plug-and-play-like data acquisition system that requires standard languages and modules for data displays...Telemetry Group DOCUMENT 127-17 DATA DISPLAY MARKUP LANGUAGE (DDML) HANDBOOK DISTRIBUTION A: APPROVED FOR...DOCUMENT 127-17 DATA DISPLAY MARKUP LANGUAGE (DDML) HANDBOOK January 2017 Prepared by Telemetry Group

  13. Reconfigurable Full-Page Braille Displays

    Science.gov (United States)

    Garner, H. Douglas

    1994-01-01

    Electrically actuated braille display cells of proposed type arrayed together to form full-page braille displays. Like other braille display cells, these provide changeable patterns of bumps driven by digitally recorded text stored on magnetic tapes or in solid-state electronic memories. Proposed cells contain electrorheological fluid. Viscosity of such fluid increases in strong electrostatic field.

  14. 27 CFR 6.83 - Product displays.

    Science.gov (United States)

    2010-04-01

    ... industry member of giving or selling product displays to a retailer does not constitute a means to induce... costs are excluded. (2) All product displays must bear conspicuous and substantial advertising matter on... address of the retailer may appear on the product displays. (3) The giving or selling of such...

  15. CERN students display their work

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    The first poster session by students working on the LHC experiments, organised by the LPCC, was a great success. Showcasing the talents of over a hundred young physicists from all over the world, it was an opportunity for everyone at CERN to check out the wide range of research work being done by the new generation of physicists at CERN.   At 5.30 p.m. on Wednesday 23 March, the first poster session by CERN students took place in Restaurant No.1, where no fewer than 87 posters went on public display. The students were split into 8 groups according to their research field* and all were on hand to answer the questions of an inquisitive audience. TH Department's Michelangelo Mangano, who is head of the LHC Physics Centre at CERN (LPCC) and is responsible for the initiative, confirms that nothing was left to chance, even the choice of date: "We wanted to make the most of the general enthusiasm around the winter conferences and the meeting of the LHC Experiments Committee to present the stud...

  16. Citizenship displayed by disabled people

    Directory of Open Access Journals (Sweden)

    Eliana Prado Carlino

    2010-12-01

    Full Text Available By investigating the processes by which successful teachers become activate citizens and by listening to the diversity and richness of their life and formation stories, this work became possible. Its aim is to display some of the utterances of two Down Syndrome individuals and their active-citizenship activities. Their stories were told in the reports of two teachers when describing their personal and professional history, and were considered to be an integral part of it. Thus, some of the utterances and perceptions with which these two individuals elaborate their references, their worldview and their active-citizenship activity are evidenced in this paper. This article is based on the language conceptions of Vygotsky and Bakhtin who defend the idea that the group and the social mentality are ingrain in the individual. Hence, the history of one person reveals that of many others, since there is a deep link between the individual and the social in the formation of a subjective worldview. As a result, it can be easily seen that the utterances expressed by the participants in this research cannot be considered strictly individual because enunciation is social in nature. Despite the fact that the utterances are those of individuals, they manifest a collective reality. This demonstrates the real advantages and possibilities that deficient people get from their participation and intervention in society.

  17. Non-binary Colour Modulation for Display Device Based on Phase Change Materials

    Science.gov (United States)

    Ji, Hong-Kai; Tong, Hao; Qian, Hang; Hui, Ya-Juan; Liu, Nian; Yan, Peng; Miao, Xiang-Shui

    2016-12-01

    A reflective-type display device based on phase change materials is attractive because of its ultrafast response time and high resolution compared with a conventional display device. This paper proposes and demonstrates a unique display device in which multicolour changing can be achieved on a single device by the selective crystallization of double layer phase change materials. The optical contrast is optimized by the availability of a variety of film thicknesses of two phase change layers. The device exhibits a low sensitivity to the angle of incidence, which is important for display and colour consistency. The non-binary colour rendering on a single device is demonstrated for the first time using optical excitation. The device shows the potential for ultrafast display applications.

  18. Photonic crystal-adaptive optical devices

    DEFF Research Database (Denmark)

    Buss, Thomas

    -doped liquid crystal gain medium for the realization of cheap and compact optically pumped, electrically tunable lasers. Finally, a transparent projection display is presented which uses sub-wavelength gratings for redirection of light guided inside a waveguide and facilitates electro-optic switching by means...

  19. Actively addressed single pixel full-colour plasmonic display

    Science.gov (United States)

    Franklin, Daniel; Frank, Russell; Wu, Shin-Tson; Chanda, Debashis

    2017-05-01

    Dynamic, colour-changing surfaces have many applications including displays, wearables and active camouflage. Plasmonic nanostructures can fill this role by having the advantages of ultra-small pixels, high reflectivity and post-fabrication tuning through control of the surrounding media. However, previous reports of post-fabrication tuning have yet to cover a full red-green-blue (RGB) colour basis set with a single nanostructure of singular dimensions. Here, we report a method which greatly advances this tuning and demonstrates a liquid crystal-plasmonic system that covers the full RGB colour basis set, only as a function of voltage. This is accomplished through a surface morphology-induced, polarization-dependent plasmonic resonance and a combination of bulk and surface liquid crystal effects that manifest at different voltages. We further demonstrate the system's compatibility with existing LCD technology by integrating it with a commercially available thin-film-transistor array. The imprinted surface interfaces readily with computers to display images as well as video.

  20. Synthesis of chiral networks for polymer stabilized cholesteric texture (PSCT) displays

    Energy Technology Data Exchange (ETDEWEB)

    Rego, J.A.; Cahill, P.A.

    1997-03-01

    New mono- and di-functional polymerizable twist agents for formation of polymer stabilized cholesteric texture liquid crystal displays have been synthesized. Degree of crosslinking has a pronounced effect on electrooptic response of the cell and the stability of oriented states.

  1. An Integrated Procedure for Measuring the Spatial and Temporal Resolution of Visual Displays

    Science.gov (United States)

    2004-12-01

    Lindholm & Martin, 1993; Lindholm, Pierce, & Scharine , 2001; Lindholm, Scharine , & Pierce, 2003). In addition, it is well known that imagery...J., Pierce, B., & Scharine , A. (2001). Liquid-crystal displays and moving-image quality. Proceedings of the 2001 Interservice/Industry Training...Simulation, and Education Conference. Lindholm, J., Scharine , A., and Pierce, B. (2003). Motion quality in simulator imagery: some effects of

  2. Laser-based displays: a review.

    Science.gov (United States)

    Chellappan, Kishore V; Erden, Erdem; Urey, Hakan

    2010-09-01

    After the invention of lasers, in the past 50 years progress made in laser-based display technology has been very promising, with commercial products awaiting release to the mass market. Compact laser systems, such as edge-emitting diodes, vertical-cavity surface-emitting lasers, and optically pumped semiconductor lasers, are suitable candidates for laser-based displays. Laser speckle is an important concern, as it degrades image quality. Typically, one or multiple speckle reduction techniques are employed in laser displays to reduce speckle contrast. Likewise, laser safety issues need to be carefully evaluated in designing laser displays under different usage scenarios. Laser beam shaping using refractive and diffractive components is an integral part of laser displays, and the requirements depend on the source specifications, modulation technique, and the scanning method being employed in the display. A variety of laser-based displays have been reported, and many products such as pico projectors and laser televisions are commercially available already.

  3. Synthesis of SAPO-56 with controlled crystal size

    Science.gov (United States)

    Wu, Ting; Feng, Xuhui; Carreon, Maria L.; Carreon, Moises A.

    2017-03-01

    Herein, we present the hydrothermal synthesis of SAPO-56 crystals with relatively controlled crystal/particle size. The effects of water content, aluminum source, gel composition, stirring, crystallization temperature and time, as well as the incorporation of crystal growth inhibitors during synthesis were systematically investigated. The synthesized SAPO-56 crystals displayed BET surface areas as high as ˜630 m2 g-1 with relative narrow size distribution in the ˜5-60 μm range. Nitrogen BET surface areas in the 451 to 631 m2 g-1 range were observed. Decreasing the crystallization temperature from 220 to 210 °C helped to decrease the average SAPO-56 crystal size. Diluted gel compositions promoted the formation of smaller crystals. Crystal growth inhibitors were found to be helpful in reducing crystal size and narrow the size distribution. Specifically, ˜5 μm SAPO-56 crystals displaying narrow size distribution were synthesized employing aluminum-tri-sec-butoxide as Al source, high water content, and high stirring rates.

  4. Do LCDs have a chance to keep a leading position on flat panel display market?

    Science.gov (United States)

    Zielinski, Jerzy; Olifierczuk, Marek

    2004-09-01

    A lot of significant discoveries and inventions in the field of technology of displays were made in the latter part of the twentieth century. Apart from well-known CRT, the plasma-, luminescence- and liquid crystal-displays are commercially available. One can notice that a leading position on that flat panel displays market belong to LCD. But the progress in Organic LED materials and devices is impressive. Threshold voltage for light emission have fallen from several thousands V to just 2 - 3 V for today's OLEDs (polymer and small molecule). Luminous efficiency has increased from 0,01 to more than 10 lm/W. These improvements have brought PLED technology to the point where serious consideration is being given to OLED graphic and video display product. The question given some years ago by Dr. M. E. Becker, [Display Metrology and Systems]: "...is the current OLED enthusiasm justified because OLED displays feature significant improvements in visual and ergonomic performance, and because they are much cheaper to manufacture; Or it is just another hope for those who missed the LCD train?...," is trite. During SID Conference in Baltimore in 2003 two companies claiming to have built the largest organic LED. International Display Technology demonstrated a 20 inch display driven by "super amorphous silicon" technology; Sony showed off its 24 inch screen, which consists of a 2x2 tiled array of OLED displays. The presented work will be oriented towards specifying the characteristic features of liquid crystal and electro luminescence organic compounds which make these groups of displays so attractive and prospective among other imagery systems devices existing nowadays.

  5. Microspheres in Plasma Display Panels

    Science.gov (United States)

    2006-01-01

    Filling small bubbles of molten glass with gases is just as difficult as it sounds, but the technical staff at NASA is not known to shy away from a difficult task. When Microsphere Systems, Inc. (MSI), of Ypsilanti, Michigan, and Imaging Systems Technology, Inc. (IST), of Toledo, Ohio, were trying to push the limits of plasma displays but were having difficulty with the designs, NASA s Glenn Garrett Morgan Commercialization Initiative (GMCI) assembled key personnel at Glenn Research Center and Ohio State University for a brainstorming session to come up with a solution for the companies. They needed a system that could produce hollow, glass micro-sized spheres (microspheres) that could be filled with a variety of gasses. But the extremely high temperature required to force the micro-sized glass bubbles to form at the tip of a metal nozzle resulted in severe discoloration of the microspheres. After countless experiments on various glass-metal combinations, they had turned to the GMCI for help. NASA experts in advanced metals, ceramics, and glass concluded that a new design approach was necessary. The team determined that what was needed was a phosphate glass composition that would remain transparent, and they went to work on a solution. Six weeks later, using the design tips from the NASA team, Tim Henderson, president of MSI, had designed a new system in which all surfaces in contact with the molten glass would be ceramic instead of metal. Meanwhile, IST was able to complete a Phase I Small Business Innovation Research (SBIR) grant supported by the National Science Foundation (NSF) and supply a potential customer with samples of the microspheres for evaluation as filler materials for high-performance insulations.

  6. Military display market segment: wearable and portable

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    2003-09-01

    The military display market (MDM) is analyzed in terms of one of its segments, wearable and portable displays. Wearable and portable displays are those embedded in gear worn or carried by warfighters. Categories include hand-mobile (direct-view and monocular/binocular), palm-held, head/helmet-mounted, body-strapped, knee-attached, lap-born, neck-lanyard, and pocket/backpack-stowed. Some 62 fielded and developmental display sizes are identified in this wearable/portable MDM segment. Parameters requiring special consideration, such as weight, luminance ranges, light emission, viewing angles, and chromaticity coordinates, are summarized and compared. Ruggedized commercial versus commercial off-the-shelf designs are contrasted; and a number of custom displays are also found in this MDM category. Display sizes having aggregate quantities of 5,000 units or greater or having 2 or more program applications are identified. Wearable and portable displays are also analyzed by technology (LCD, LED, CRT, OLED and plasma). The technical specifications and program history of several high-profile military programs are discussed to provide a systems context for some representative displays and their function. As of August 2002 our defense-wide military display market study has documented 438,882 total display units distributed across 1,163 display sizes and 438 weapon systems. Wearable and portable displays account for 202,593 displays (46% of total DoD) yet comprise just 62 sizes (5% of total DoD) in 120 weapons systems (27% of total DoD). Some 66% of these wearable and portable applications involve low information content displays comprising just a few characters in one color; however, there is an accelerating trend towards higher information content units capable of showing changeable graphics, color and video.

  7. Display MTF measurements based on scanning and imaging technologies and its importance in the application space

    Science.gov (United States)

    Kaur, Balvinder; Olson, Jeff; Flug, Eric A.

    2016-05-01

    Measuring the Modulation Transfer Function (MTF) of a display monitor is necessary for many applications such as: modeling end-to-end systems, conducting perception experiments, and performing targeting tasks in real-word scenarios. The MTF of a display defines the resolution properties and quantifies how well the spatial frequencies are displayed on a monitor. Many researchers have developed methods to measure display MTFs using either scanning or imaging devices. In this paper, we first present methods to measure display MTFs using two separate technologies and then discuss the impact of a display MTF on a system's performance. The two measurement technologies were scanning with a photometer and imaging with a CMOS based camera. To estimate a true display MTF, measurements made with the photometer were backed out for the scanning optics aperture. The developed methods were applied to measure MTFs of the two types of monitors, Cathode Ray Tube (CRT) and Liquid Crystal Display (LCD). The accuracy of the measured MTFs was validated by comparing MTFs measured with the two systems. The methods presented here are simple and can be easily implemented employing either a Prichard photometer or an imaging device. In addition, the impact of a display MTF on the end-to-end performance of a system was modeled using NV-IPM.

  8. Performance evaluation of soft copy display systems according to AAPM TG18 protocol.

    Science.gov (United States)

    Olgar, T; Kamberli, E

    2013-06-01

    The purpose of this study was to evaluate the display performance of the liquid crystal display monitors according to the American association of physicists in medicine task group 18 (AAPM TG18) protocol at prior and after new calibration. We measured minimum and maximum luminance, luminance ratio, luminance and contrast response, luminance angular and spatial dependency, resolution, veiling glare and chromaticity quantitatively for 33 medical displays. Display noise was evaluated only visually. The mean maximum luminance and luminance ratio were 386 and 273 cd m(-2), respectively. The mean deviation of measured luminance and contrast response from expected response associated with the digital imaging and communications in medicine (DICOM) grayscale standard display function (GSDF) were 9.76 and 2.35 % at prior calibration and 1.23 and 0.26 % after recalibration, respectively. In luminance uniformity test the mean maximum luminance deviation was 16 %. Luminance method was used in the spatial resolution test and the mean percent luminance difference was 12 % at the center. The mean glare ratio was 1 154. The average color uniformity parameter across the display area of each display device was 0.0093. Majority of the test results were in good agreement with the criteria recommended by AAPM TG18 report. Considerable improvement was observed in display luminance and contrast response with respect to expected response of DICOM GSDF after new calibration for some displays.

  9. Optical characterizations of complete TFT-LCD display devices by phase modulated spectroscopic ellipsometry

    Energy Technology Data Exchange (ETDEWEB)

    Gaillet, Melanie [HORIBA Jobin Yvon SAS, Thin Film Division, ZA de la Vigne aux Loups-5 avenue Arago, 91 380 Chilly-Mazarin (France); Yan Yi [HORIBA Jobin Yvon Inc., 3880 Park Ave., Edison, NJ 08820-3012 (United States)], E-mail: Li.Yan@jobinyvon.com; Teboul, Eric [HORIBA Jobin Yvon Inc., 3880 Park Ave., Edison, NJ 08820-3012 (United States)

    2007-12-03

    A commercially available phase modulated spectroscopic ellipsometer (PMSE) has been used to characterize a full thin film transistor-liquid crystal display (TFT-LCD) structure, including the glass substrates coated with transparent conducting indium tin oxide (ITO) layers, the twisted liquid crystal (LC) layer sandwiched in between, and the amorphous silicon (a-Si) TFT device which controls the luminance of a pixel. Due to its unique optical design, PMSE presents an unparallel capability to measure very accurately ultra thin films on transparent substrates as often found in display applications. Results show that the ITO layer is inhomogeneous in depth, corresponding to a graded microstructure. In addition, strong uniaxial anisotropy was determined for the liquid crystal device over the entire measured spectral range. Finally, doping effects on the optical properties of the a-Si layer of the TFT device were also measured.

  10. ACCURACY EVALUATION OF THE OBJECT LOCATION VISUALIZATION FOR GEO-INFORMATION AND DISPLAY SYSTEMS OF MANNED AIRCRAFTS NAVIGATION COMPLEXES

    Directory of Open Access Journals (Sweden)

    M. O. Kostishin

    2014-01-01

    Full Text Available The paper deals with the issue of accuracy estimating for the object location display in the geographic information systems and display systems of manned aircrafts navigation complexes. Application features of liquid crystal screens with a different number of vertical and horizontal pixels are considered at displaying of geographic information data on different scales. Estimation display of navigation parameters values on board the aircraft is done in two ways: a numeric value is directly displayed on the screen of multi-color indicator, and a silhouette of the object is formed on the screen on a substrate background, which is a graphical representation of area map in the flight zone. Various scales of area digital map display currently used in the aviation industry have been considered. Calculation results of one pixel scale interval, depending on the specifications of liquid crystal screen and zoom of the map display area on the multifunction digital display, are given. The paper contains experimental results of the accuracy evaluation for area position display of the aircraft based on the data from the satellite navigation system and inertial navigation system, obtained during the flight program run of the real object. On the basis of these calculations a family of graphs was created for precision error display of the object reference point position using the onboard indicators with liquid crystal screen with different screen resolutions (6 "×8", 7.2 "×9.6", 9"×12" for two map display scales (1:0 , 25 km, 1-2 km. These dependency graphs can be used both to assess the error value of object area position display in existing navigation systems and to calculate the error value in upgrading facilities.

  11. Subjective comparison of brightness preservation methods for local backlight dimming displays

    DEFF Research Database (Denmark)

    Korhonen, Jari; Mantel, Claire; Forchhammer, Søren

    2015-01-01

    Local backlight dimming is a popular technology in high quality Liquid Crystal Displays (LCDs). In those displays, the backlight is composed of contributions from several individually adjustable backlight segments, set at different backlight luminance levels in different parts of the screen......, according to the luma of the target image displayed on LCD. Typically, transmittance of the liquid crystal cells (pixels) located in the regions with dimmed backlight is increased in order to preserve their relative brightness with respect to the pixels located in the regions with bright backlight...... ordering to compare the relevant methods on a real-life LCD with a local backlight dimming capability. In general, our results show that locally adapted brightness preservation methods produce more preferred visual outcome than global methods, but dependency on the content is also observed. Based...

  12. Digital interface for high-resolution displays

    Science.gov (United States)

    Hermann, David J.; Gorenflo, Ronald L.

    1999-08-01

    Commercial display interfaces are currently transitioning from analog to digital. Although this transition is in the very early stages, the military needs to begin planning their own transition to digital. There are many problems with the analog interface in high-resolution display systems that are solved by changing to a digital interface. Also, display system cost can be lower with a digital interface to a high resolution display. Battelle is under contract with DARPA to develop an advanced Display Interface (ADI) to replace the analog RGB interfaces currently used in high definition workstation displays. The goal is to create a standard digital display interface for military applications that is based on emerging commercial standards. Support for military application- specific functionality is addressed, including display test and control. The main challenges to implementing a digital display interface are described, along with approaches to address the problems. Conceptual ADI architectures are described and contrasted. The current and emerging commercial standards for digital display interfaces are reviewed in detail. Finally, the tasks required to complete the ADI effort are outlined and described.

  13. Lyotropic Liquid Crystal Phases from Anisotropic Nanomaterials

    Directory of Open Access Journals (Sweden)

    Ingo Dierking

    2017-10-01

    Full Text Available Liquid crystals are an integral part of a mature display technology, also establishing themselves in other applications, such as spatial light modulators, telecommunication technology, photonics, or sensors, just to name a few of the non-display applications. In recent years, there has been an increasing trend to add various nanomaterials to liquid crystals, which is motivated by several aspects of materials development. (i addition of nanomaterials can change and thus tune the properties of the liquid crystal; (ii novel functionalities can be added to the liquid crystal; and (iii the self-organization of the liquid crystalline state can be exploited to template ordered structures or to transfer order onto dispersed nanomaterials. Much of the research effort has been concentrated on thermotropic systems, which change order as a function of temperature. Here we review the other side of the medal, the formation and properties of ordered, anisotropic fluid phases, liquid crystals, by addition of shape-anisotropic nanomaterials to isotropic liquids. Several classes of materials will be discussed, inorganic and mineral liquid crystals, viruses, nanotubes and nanorods, as well as graphene oxide.

  14. Laser-driven polyplanar optic display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.; Biscardi, C.; Brewster, C.; DeSanto, L. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology; Beiser, L. [Leo Beiser Inc., Flushing, NY (United States)

    1998-01-01

    The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte-black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 200 milliwatt green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the DLP chip, the optomechanical design and viewing angle characteristics.

  15. Spectroradiometric characterization of autostereoscopic 3D displays

    Science.gov (United States)

    Rubiño, Manuel; Salas, Carlos; Pozo, Antonio M.; Castro, J. J.; Pérez-Ocón, Francisco

    2013-11-01

    Spectroradiometric measurements have been made for the experimental characterization of the RGB channels of autostereoscopic 3D displays, giving results for different measurement angles with respect to the normal direction of the plane of the display. In the study, 2 different models of autostereoscopic 3D displays of different sizes and resolutions were used, making measurements with a spectroradiometer (model PR-670 SpectraScan of PhotoResearch). From the measurements made, goniometric results were recorded for luminance contrast, and the fundamental hypotheses have been evaluated for the characterization of the displays: independence of the RGB channels and their constancy. The results show that the display with the lower angle variability in the contrast-ratio value and constancy of the chromaticity coordinates nevertheless presented the greatest additivity deviations with the measurement angle. For both displays, when the parameters evaluated were taken into account, lower angle variability consistently resulted in the 2D mode than in the 3D mode.

  16. Evaluating Ambient Displays in the Wild

    DEFF Research Database (Denmark)

    Messeter, Jörn; Molenaar, Daryn

    A prominent issue for evaluating ambient displays has been the conflict between the relative intrusiveness of evaluation methods and the intention to keep the display at the periphery of the user’s attention. There is a general lack of research discussing the difficulties of evaluating ambient...... displays in the wild, and in particular social aspects of use has received little attention. This paper presents a case study of an ambient light display designed for a public setting. Based on results from a non-intrusive in situ evaluation, we argue that viewing ambient displays as features of a broader...... social setting may aid our understanding of issues regarding the evaluation of ambient displays in the wild....

  17. Parallel large data visualization with display walls

    Science.gov (United States)

    Scheidegger, Luiz; Vo, Huy T.; Krüger, Jens; Silva, Cláudio T.; Comba, João L. D.

    2012-01-01

    While there exist popular software tools that leverage the power of arrays of tiled high resolution displays, they usually require either the use of a particular API or significant programming effort to be properly configured. We present PVW (Parallel Visualization using display Walls), a framework that uses display walls for scientific visualization, requiring minimum labor in setup, programming and configuration. PVW works as a plug-in to pipeline-based visualization software, and allows users to migrate existing visualizations designed for a single-workstation, single-display setup to a large tiled display running on a distributed machine. Our framework is also extensible, allowing different APIs and algorithms to be made display wall-aware with minimum effort.

  18. Conceptual Design of Industrial Process Displays

    DEFF Research Database (Denmark)

    Pedersen, C.R.; Lind, Morten

    1999-01-01

    by a simple example from a plant with batch processes. Later the method is applied to develop a supervisory display for a condenser system in a nuclear power plant. The differences between the continuous plant domain of power production and the batch processes from the example are analysed and broad...... categories of display types are proposed. The problems involved in specification and invention of a supervisory display are analysed and conclusions from these problems are made. It is concluded that the design method proposed provides a framework for the progress of the display design and is useful in pin......-pointing the actual problems. The method was useful in reducing the number of existing displays that could fulfil the requirements of the supervision task. The method provided at the same time a framework for dealing with the problems involved in inventing new displays based on structured analysis. However...

  19. Three-dimensional Imaging, Visualization, and Display

    CERN Document Server

    Javidi, Bahram; Son, Jung-Young

    2009-01-01

    Three-Dimensional Imaging, Visualization, and Display describes recent developments, as well as the prospects and challenges facing 3D imaging, visualization, and display systems and devices. With the rapid advances in electronics, hardware, and software, 3D imaging techniques can now be implemented with commercially available components and can be used for many applications. This volume discusses the state-of-the-art in 3D display and visualization technologies, including binocular, multi-view, holographic, and image reproduction and capture techniques. It also covers 3D optical systems, 3D display instruments, 3D imaging applications, and details several attractive methods for producing 3D moving pictures. This book integrates the background material with new advances and applications in the field, and the available online supplement will include full color videos of 3D display systems. Three-Dimensional Imaging, Visualization, and Display is suitable for electrical engineers, computer scientists, optical e...

  20. Biological Macromolecule Crystallization Database

    Science.gov (United States)

    SRD 21 Biological Macromolecule Crystallization Database (Web, free access)   The Biological Macromolecule Crystallization Database and NASA Archive for Protein Crystal Growth Data (BMCD) contains the conditions reported for the crystallization of proteins and nucleic acids used in X-ray structure determinations and archives the results of microgravity macromolecule crystallization studies.

  1. Laser Based 3D Volumetric Display System

    Science.gov (United States)

    1993-03-01

    Literature, Costa Mesa, CA July 1983. 3. "A Real Time Autostereoscopic Multiplanar 3D Display System", Rodney Don Williams, Felix Garcia, Jr., Texas...8217 .- NUMBERS LASER BASED 3D VOLUMETRIC DISPLAY SYSTEM PR: CD13 0. AUTHOR(S) PE: N/AWIU: DN303151 P. Soltan, J. Trias, W. Robinson, W. Dahlke 7...laser generated 3D volumetric images on a rotating double helix, (where the 3D displays are computer controlled for group viewing with the naked eye

  2. Matrix-addressable electrochromic display cell

    Science.gov (United States)

    Beni, G.; Schiavone, L. M.

    1981-04-01

    We report an electrochromic display cell with intrinsic matrix addressability. The cell, based on a sputtered iridium oxide film (SIROF) and a tantalum-oxide hysteretic counterelectrode, has electrochromic parameters (i.e., response times, operating voltages, and contrast) similar to those of other SIROF display devices, but in addition, has short-circuit memory and voltage threshold. Memory and threshold are sufficiently large to allow, in principle, multiplexing of electrochromic display panels of large-screen TV pixel size.

  3. Helmet-Mounted Display Design Guide

    Science.gov (United States)

    1997-11-03

    on openStack create menu "CSHMD" set the menuitems of "CSHMD" to "(Main Menu; References;-; Definitions;Display Criteria;Display Formats;Display Modes...34Macintosh" then put ":" into dirSep else put "V’ into dirSep put stackPathO&"Resource"&dirSep into gResPath put 0 into gXRef end openStack on

  4. Future Directions for Astronomical Image Display

    Science.gov (United States)

    Mandel, Eric

    2000-03-01

    In the "Future Directions for Astronomical Image Displav" project, the Smithsonian Astrophysical Observatory (SAO) and the National Optical Astronomy Observatories (NOAO) evolved our existing image display program into fully extensible. cross-platform image display software. We also devised messaging software to support integration of image display into astronomical analysis systems. Finally, we migrated our software from reliance on Unix and the X Window System to a platform-independent architecture that utilizes the cross-platform Tcl/Tk technology.

  5. Refreshable Braille Displays Using EAP Actuators

    Science.gov (United States)

    Bar-Cohen, Yoseph

    2010-01-01

    Refreshable Braille can help visually impaired persons benefit from the growing advances in computer technology. The development of such displays in a full screen form is a great challenge due to the need to pack many actuators in small area without interferences. In recent years, various displays using actuators such as piezoelectric stacks have become available in commercial form but most of them are limited to one line Braille code. Researchers in the field of electroactive polymers (EAP) investigated methods of using these materials to form full screen displays. This manuscript reviews the state of the art of producing refreshable Braille displays using EAP-based actuators..

  6. Refreshable Braille displays using EAP actuators

    Science.gov (United States)

    Bar-Cohen, Yoseph

    2010-04-01

    Refreshable Braille can help visually impaired persons benefit from the growing advances in computer technology. The development of such displays in a full screen form is a great challenge due to the need to pack many actuators in small area without interferences. In recent years, various displays using actuators such as piezoelectric stacks have become available in commercial form but most of them are limited to one line Braille code. Researchers in the field of electroactive polymers (EAP) investigated methods of using these materials to form full screen displays. This manuscript reviews the state of the art of producing refreshable Braille displays using EAP-based actuators.

  7. PENGARUH DISPLAY PRODUK PADA KEPUTUSAN PEMBELIAN KONSUMEN

    Directory of Open Access Journals (Sweden)

    Ina Melati

    2012-11-01

    Full Text Available Most of ritel outlet recently using product display as a one of their best marketing strategy, the reason is quiet easy to be understood, since consumers are too easy to be teased by those kind of beautiful product display that is being displayed by the retail outlet. The good retail outlets are trying their best to design and make the very good product display, so they can attract more consumers and make them not thinking twice to visit their store and purchase lots of thing. Clearly seeing that an attractive product design is able to influence a consumer to make a buying decision. 

  8. Testing Instrument for Flight-Simulator Displays

    Science.gov (United States)

    Haines, Richard F.

    1987-01-01

    Displays for flight-training simulators rapidly aligned with aid of integrated optical instrument. Calibrations and tests such as aligning boresight of display with respect to user's eyes, checking and adjusting display horizon, checking image sharpness, measuring illuminance of displayed scenes, and measuring distance of optical focus of scene performed with single unit. New instrument combines all measurement devices in single, compact, integrated unit. Requires just one initial setup. Employs laser and produces narrow, collimated beam for greater measurement accuracy. Uses only one moving part, double right prism, to position laser beam.

  9. Framework for effective use of multiple displays

    Science.gov (United States)

    Liu, Qiong; Kimber, Don; Zhao, Frank; Huang, Jeffrey

    2005-10-01

    Meeting environments, such as conference rooms, executive briefing centers, and exhibition spaces, are now commonly equipped with multiple displays, and will become increasingly display-rich in the future. Existing authoring/presentation tools such as PowerPoint, however, provide little support for effective utilization of multiple displays. Even using advanced multi-display enabled multimedia presentation tools, the task of assigning material to displays is tedious and distracts presenters from focusing on content. This paper describes a framework for automatically assigning presentation material to displays, based on a model of the quality of views of audience members. The framework is based on a model of visual fidelity which takes into account presentation content, audience members' locations, the limited resolution of human eyes, and display location, orientation, size, resolution, and frame rate. The model can be used to determine presentation material placement based on average or worst case audience member view quality, and to warn about material that would be illegible. By integrating this framework with a previous system for multi-display presentation [PreAuthor, others], we created a tool that accepts PowerPoint and/or other media input files, and automatically generates a layout of material onto displays for each state of the presentation. The tool also provides an interface allowing the presenter to modify the automatically generated layout before or during the actual presentation. This paper discusses the framework, possible application scenarios, examples of the system behavior, and our experience with system use.

  10. Pengaruh Display Produk pada Keputusan Pembelian Konsumen

    Directory of Open Access Journals (Sweden)

    Ina Melati

    2012-10-01

    Full Text Available Most of ritel outlet recently using product display as a one of their best marketing strategy, the reason is quiet easy to be understood, since consumers are too easy to be teased by those kind of beautiful product display that is being displayed by the retail outlet. The good retail outlets are trying their best to design and make the very good product display, so they can attract more consumers and make them not thinking twice to visit their store and purchase lots of thing. Clearly seeing that an attractive product design is able to influence a consumer to make a buying decision.

  11. Display of nuclear medicine imaging studies

    CERN Document Server

    Singh, B; Samuel, A M

    2002-01-01

    Nuclear medicine imaging studies involve evaluation of a large amount of image data. Digital signal processing techniques have introduced processing algorithms that increase the information content of the display. Nuclear medicine imaging studies require interactive selection of suitable form of display and pre-display processing. Static imaging study requires pre-display processing to detect focal defects. Point operations (histogram modification) along with zoom and capability to display more than one image in one screen is essential. This album mode of display is also applicable to dynamic, MUGA and SPECT data. Isometric display or 3-D graph of the image data is helpful in some cases e.g. point spread function, flood field data. Cine display is used on a sequence of images e.g. dynamic, MUGA and SPECT imaging studies -to assess the spatial movement of tracer with time. Following methods are used at the investigator's discretion for inspection of the 3-D object. 1) Display of orthogonal projections, 2) Disp...

  12. Volumetric Three-Dimensional Display Systems

    Science.gov (United States)

    Blundell, Barry G.; Schwarz, Adam J.

    2000-03-01

    A comprehensive study of approaches to three-dimensional visualization by volumetric display systems This groundbreaking volume provides an unbiased and in-depth discussion on a broad range of volumetric three-dimensional display systems. It examines the history, development, design, and future of these displays, and considers their potential for application to key areas in which visualization plays a major role. Drawing substantially on material that was previously unpublished or available only in patent form, the authors establish the first comprehensive technical and mathematical formalization of the field, and examine a number of different volumetric architectures. System level design strategies are presented, from which proposals for the next generation of high-definition predictable volumetric systems are developed. To ensure that researchers will benefit from work already completed, they provide: * Descriptions of several recent volumetric display systems prepared from material supplied by the teams that created them * An abstract volumetric display system design paradigm * An historical summary of 90 years of development in volumetric display system technology * An assessment of the strengths and weaknesses of many of the systems proposed to date * A unified presentation of the underlying principles of volumetric display systems * A comprehensive bibliography Beautifully supplemented with 17 color plates that illustrate volumetric images and prototype displays, Volumetric Three-Dimensional Display Systems is an indispensable resource for professionals in imaging systems development, scientific visualization, medical imaging, computer graphics, aerospace, military planning, and CAD/CAE.

  13. Ribbon crystals.

    Directory of Open Access Journals (Sweden)

    Jakob Bohr

    Full Text Available A repetitive crystal-like pattern is spontaneously formed upon the twisting of straight ribbons. The pattern is akin to a tessellation with isosceles triangles, and it can easily be demonstrated with ribbons cut from an overhead transparency. We give a general description of developable ribbons using a ruled procedure where ribbons are uniquely described by two generating functions. This construction defines a differentiable frame, the ribbon frame, which does not have singular points, whereby we avoid the shortcomings of the Frenet-Serret frame. The observed spontaneous pattern is modeled using planar triangles and cylindrical arcs, and the ribbon structure is shown to arise from a maximization of the end-to-end length of the ribbon, i.e. from an optimal use of ribbon length. The phenomenon is discussed in the perspectives of incompatible intrinsic geometries and of the emergence of long-range order.

  14. Crystallization process

    Science.gov (United States)

    Adler, Robert J.; Brown, William R.; Auyang, Lun; Liu, Yin-Chang; Cook, W. Jeffrey

    1986-01-01

    An improved crystallization process is disclosed for separating a crystallizable material and an excluded material which is at least partially excluded from the solid phase of the crystallizable material obtained upon freezing a liquid phase of the materials. The solid phase is more dense than the liquid phase, and it is separated therefrom by relative movement with the formation of a packed bed of solid phase. The packed bed is continuously formed adjacent its lower end and passed from the liquid phase into a countercurrent flow of backwash liquid. The packed bed extends through the level of the backwash liquid to provide a drained bed of solid phase adjacent its upper end which is melted by a condensing vapor.

  15. Glassy features of crystal plasticity

    Science.gov (United States)

    Lehtinen, Arttu; Costantini, Giulio; Alava, Mikko J.; Zapperi, Stefano; Laurson, Lasse

    2016-08-01

    Crystal plasticity occurs by deformation bursts due to the avalanchelike motion of dislocations. Here we perform extensive numerical simulations of a three-dimensional dislocation dynamics model under quasistatic stress-controlled loading. Our results show that avalanches are power-law distributed and display peculiar stress and sample size dependence: The average avalanche size grows exponentially with the applied stress, and the amount of slip increases with the system size. These results suggest that intermittent deformation processes in crystalline materials exhibit an extended critical-like phase in analogy to glassy systems instead of originating from a nonequilibrium phase transition critical point.

  16. Method of manufacturing a display device

    NARCIS (Netherlands)

    Lifka, H.; Roozeboom, F.; Elfrink, R.J.; Johnson, M.T.

    2004-01-01

    ICs (20) are nearly separated from the semiconductor substrate (10) on/in which they are formed. Subsequently, the substrate is positioned upside down on a substrate (carrier) (3) which is provided with glue (21) at the location of a crystal. After attachment of the crystal to the carrier, the

  17. Structure and Properties of Liquid Crystals

    CERN Document Server

    Blinov, Lev M

    2011-01-01

    This book by Lev M. Blinov is ideal to guide researchers from their very first encounter with liquid crystals to the level where they can perform independent experiments on liquid crystals with a thorough understanding of their behaviour also in relation to the theoretical framework. Liquid crystals can be found everywhere around us. They are used in virtually every display device, whether it is for domestic appliances of for specialized technological instruments. Their finely tunable optical properties make them suitable also for thermo-sensing and laser technologies. There are many monographs written by prominent scholars on the subject of liquid crystals. The majority of them presents the subject in great depth, sometimes focusing on a particular research aspect, and in general they require a significant level of prior knowledge. In contrast, this books aims at an audience of advanced undergraduate and graduate students in physics, chemistry and materials science. The book consists of three parts: the firs...

  18. Display Developer for Firing Room Applications

    Science.gov (United States)

    Bowman, Elizabeth A.

    2013-01-01

    The firing room at Kennedy Space Center (KSC) is responsible for all NASA human spaceflight launch operations, therefore it is vital that all displays within the firing room be properly tested, up-to-date, and user-friendly during a launch. The Ground Main Propulsion System (GMPS) requires a number of remote displays for Vehicle Integration and Launch (VIL) Operations at KSC. My project is to develop remote displays for the GMPS using the Display Services and Framework (DSF) editor. These remote displays will be based on model images provided by GMPS through PowerPoint. Using the DSF editor, the PowerPoint images can be recreated with active buttons associated with the correct Compact Unique Identifiers (CUIs). These displays will be documented in the Software Requirements and Design Specifications (SRDS) at the 90% GMPS Design Review. In the future, these remote displays will be available for other developers to improve, edit, or add on to so that the display may be incorporated into the firing room to be used for launches.

  19. Interruption and Pausing of Public Display Games

    DEFF Research Database (Denmark)

    Feuchtner, Tiare; Walter, Robert; Müller, Jörg

    2016-01-01

    We present a quantitative and qualitative analysis of interruptions of interaction with a public display game, and explore the use of a manual pause mode in this scenario. In previous public display installations we observed users frequently interrupting their interaction. To explore ways of supp...

  20. Additive and subtractive transparent depth displays

    NARCIS (Netherlands)

    Kooi, F.L.; Toet, A.

    2003-01-01

    Image fusion is the generally preferred method to combine two or more images for visual display on a single screen. We demonstrate that perceptual image separation may be preferable over perceptual image fusion for the combined display of enhanced and synthetic imagery. In this context image separat

  1. Assessment of OLED displays for vision research.

    Science.gov (United States)

    Cooper, Emily A; Jiang, Haomiao; Vildavski, Vladimir; Farrell, Joyce E; Norcia, Anthony M

    2013-10-23

    Vision researchers rely on visual display technology for the presentation of stimuli to human and nonhuman observers. Verifying that the desired and displayed visual patterns match along dimensions such as luminance, spectrum, and spatial and temporal frequency is an essential part of developing controlled experiments. With cathode-ray tubes (CRTs) becoming virtually unavailable on the commercial market, it is useful to determine the characteristics of newly available displays based on organic light emitting diode (OLED) panels to determine how well they may serve to produce visual stimuli. This report describes a series of measurements summarizing the properties of images displayed on two commercially available OLED displays: the Sony Trimaster EL BVM-F250 and PVM-2541. The results show that the OLED displays have large contrast ratios, wide color gamuts, and precise, well-behaved temporal responses. Correct adjustment of the settings on both models produced luminance nonlinearities that were well predicted by a power function ("gamma correction"). Both displays have adjustable pixel independence and can be set to have little to no spatial pixel interactions. OLED displays appear to be a suitable, or even preferable, option for many vision research applications.

  2. Teacher Portfolios: Displaying the Art of Teaching

    Science.gov (United States)

    Reese, Susan

    2004-01-01

    A portfolio can convey a teacher's beliefs, knowledge and skills. An artist uses a portfolio to display artistic talent, and a teacher can use his or her portfolio to display teaching talent and teaching style. A teacher's portfolio may be used to obtain new employment, to document teaching accomplishments in order to receive a promotion or tenure…

  3. Methods for Selecting Phage Display Antibody Libraries.

    Science.gov (United States)

    Jara-Acevedo, Ricardo; Diez, Paula; Gonzalez-Gonzalez, Maria; Degano, Rosa Maria; Ibarrola, Nieves; Gongora, Rafael; Orfao, Alberto; Fuentes, Manuel

    2016-01-01

    The selection process aims sequential enrichment of phage antibody display library in clones that recognize the target of interest or antigen as the library undergoes successive rounds of selection. In this review, selection methods most commonly used for phage display antibody libraries have been comprehensively described.

  4. Space manufacturing in an automated crystal growth facility

    Science.gov (United States)

    Quinn, Alberta W.; Herrmann, Melody C.; Nelson, Pamela J.

    1989-01-01

    An account is given of a Space Station Freedom-based robotic laboratory system for crystal growth experiments; the robot must interface with both the experimental apparatus and such human input as may be required for control and display. The goal of the system is the simultaneous growth of several hundred protein crystals in microgravity. The robot possesses six degrees-of-freedom, allowing it to efficiently manipulate the cultured crystals as well as their respective growth cells; the crystals produced are expected to be of sufficiently high quality for complete structural determination on the basis of XRD.

  5. Time-Sequential Working Wavelength-Selective Filter for Flat Autostereoscopic Displays

    Directory of Open Access Journals (Sweden)

    René de la Barré

    2017-02-01

    Full Text Available A time-sequential working, spatially-multiplexed autostereoscopic 3D display design consisting of a fast switchable RGB-color filter array and a fast color display is presented. The newly-introduced 3D display design is usable as a multi-user display, as well as a single-user system. The wavelength-selective filter barrier emits the light from a larger aperture than common autostereoscopic barrier displays with similar barrier pitch and ascent. Measurements on a demonstrator with commercial display components, simulations and computational evaluations have been carried out to describe the proposed wavelength-selective display design in static states and to show the weak spots of display filters in commercial displays. An optical modelling of wavelength-selective barriers has been used for instance to calculate the light ray distribution properties of that arrangement. In the time-sequential implementation, it is important to avoid that quick eye or eyelid movement leads to visible color artifacts. Therefore, color filter cells, switching faster than conventional LC display cells, must distribute directed light from different primaries at the same time, to create a 3D presentation. For that, electric tunable liquid crystal Fabry–Pérot color filters are presented. They switch on-off the colors red, green and blue in the millisecond regime. Their active areas consist of a sub-micrometer-thick nematic layer sandwiched between dielectric mirrors and indium tin oxide (ITO-electrodes. These cells shall switch narrowband light of red, green or blue. A barrier filter array for a high resolution, glasses-free 3D display has to be equipped with several thousand switchable filter elements having different color apertures.

  6. Interruption and Pausing of Public Display Games

    DEFF Research Database (Denmark)

    Feuchtner, Tiare; Walter, Robert; Müller, Jörg

    We present a quantitative and qualitative analysis of interruptions of interaction with a public display game, and explore the use of a manual pause mode in this scenario. In previous public display installations we observed users frequently interrupting their interaction. To explore ways...... of supporting such behavior, we implemented a gesture controlled multiuser game with four pausing techniques. We evaluated them in a field study analyzing 704 users and found that our pausing techniques were eagerly explored, but rarely used with the intention to pause the game. Our study shows...... that interactions with public displays are considerably intermissive, and that users mostly interrupt interaction to socialize and mainly approach public displays in groups. We conclude that, as a typical characteristic of public display interaction, interruptions deserve consideration. However, manual pause modes...

  7. Three-dimensional hologram display system

    Science.gov (United States)

    Mintz, Frederick (Inventor); Chao, Tien-Hsin (Inventor); Bryant, Nevin (Inventor); Tsou, Peter (Inventor)

    2009-01-01

    The present invention relates to a three-dimensional (3D) hologram display system. The 3D hologram display system includes a projector device for projecting an image upon a display medium to form a 3D hologram. The 3D hologram is formed such that a viewer can view the holographic image from multiple angles up to 360 degrees. Multiple display media are described, namely a spinning diffusive screen, a circular diffuser screen, and an aerogel. The spinning diffusive screen utilizes spatial light modulators to control the image such that the 3D image is displayed on the rotating screen in a time-multiplexing manner. The circular diffuser screen includes multiple, simultaneously-operated projectors to project the image onto the circular diffuser screen from a plurality of locations, thereby forming the 3D image. The aerogel can use the projection device described as applicable to either the spinning diffusive screen or the circular diffuser screen.

  8. An interactive multiview 3D display system

    Science.gov (United States)

    Zhang, Zhaoxing; Geng, Zheng; Zhang, Mei; Dong, Hui

    2013-03-01

    The progresses in 3D display systems and user interaction technologies will help more effective 3D visualization of 3D information. They yield a realistic representation of 3D objects and simplifies our understanding to the complexity of 3D objects and spatial relationship among them. In this paper, we describe an autostereoscopic multiview 3D display system with capability of real-time user interaction. Design principle of this autostereoscopic multiview 3D display system is presented, together with the details of its hardware/software architecture. A prototype is built and tested based upon multi-projectors and horizontal optical anisotropic display structure. Experimental results illustrate the effectiveness of this novel 3D display and user interaction system.

  9. Real time speech formant analyzer and display

    Energy Technology Data Exchange (ETDEWEB)

    Holland, George E. (Ames, IA); Struve, Walter S. (Ames, IA); Homer, John F. (Ames, IA)

    1987-01-01

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  10. Extraction and Analysis of Display Data

    Science.gov (United States)

    Land, Chris; Moye, Kathryn

    2008-01-01

    The Display Audit Suite is an integrated package of software tools that partly automates the detection of Portable Computer System (PCS) Display errors. [PCS is a lap top computer used onboard the International Space Station (ISS).] The need for automation stems from the large quantity of PCS displays (6,000+, with 1,000,000+ lines of command and telemetry data). The Display Audit Suite includes data-extraction tools, automatic error detection tools, and database tools for generating analysis spread sheets. These spread sheets allow engineers to more easily identify many different kinds of possible errors. The Suite supports over 40 independent analyses, 16 NASA Tech Briefs, November 2008 and complements formal testing by being comprehensive (all displays can be checked) and by revealing errors that are difficult to detect via test. In addition, the Suite can be run early in the development cycle to find and correct errors in advance of testing.

  11. 2D/3D switchable displays

    Science.gov (United States)

    Dekker, T.; de Zwart, S. T.; Willemsen, O. H.; Hiddink, M. G. H.; IJzerman, W. L.

    2006-02-01

    A prerequisite for a wide market acceptance of 3D displays is the ability to switch between 3D and full resolution 2D. In this paper we present a robust and cost effective concept for an auto-stereoscopic switchable 2D/3D display. The display is based on an LCD panel, equipped with switchable LC-filled lenticular lenses. We will discuss 3D image quality, with the focus on display uniformity. We show that slanting the lenticulars in combination with a good lens design can minimize non-uniformities in our 20" 2D/3D monitors. Furthermore, we introduce fractional viewing systems as a very robust concept to further improve uniformity in the case slanting the lenticulars and optimizing the lens design are not sufficient. We will discuss measurements and numerical simulations of the key optical characteristics of this display. Finally, we discuss 2D image quality, the switching characteristics and the residual lens effect.

  12. Moiré-reduction method for slanted-lenticular-based quasi-three-dimensional displays

    Science.gov (United States)

    Zhuang, Zhenfeng; Surman, Phil; Zhang, Lei; Rawat, Rahul; Wang, Shizheng; Zheng, Yuanjin; Sun, Xiao Wei

    2016-12-01

    In this paper we present a method for determining the preferred slanted angle for a lenticular film that minimizes moiré patterns in quasi-three-dimensional (Q3D) displays. We evaluate the preferred slanted angles of the lenticular film for the stripe-type sub-pixel structure liquid crystal display (LCD) panel. Additionally, the sub-pixels mapping algorithm of the specific angle is proposed to assign the images to either the right or left eye channel. A Q3D display prototype is built. Compared with the conventional SLF, this newly implemented Q3D display can not only eliminate moiré patterns but also provide 3D images in both portrait and landscape orientations. It is demonstrated that the developed slanted lenticular film (SLF) provides satisfactory 3D images by employing a compact structure, minimum moiré patterns and stabilized 3D contrast.

  13. Display system analysis with critical polarization elements in a non-sequential ray tracing environment

    Science.gov (United States)

    Herlocker, J. A.; Jiang, J.; Garcia, K. J.

    2008-08-01

    Common digital display systems have evolved into sophisticated optical devices. The rapid market growth in liquid crystal displays makes the simulation of full systems attractive, promoting virtual prototyping with decreased development times and improved manufacturability. Realistic simulation using commercial non-sequential ray tracing tools has been instrumental in this process, but the need to accurately model polarization devices has become critical in many designs. As display systems seek more efficient use of light and more accurate color representation, the proper simulation of polarization devices with large acceptance angles is essential. This paper examines non-uniform polarization effects in the simulation of modern display devices using realistic polarizer and retarder models in the ASAP® non-sequential ray-tracing environment.

  14. Morphological control and polarization switching in polymer dispersed liquid crystal materials and devices

    Indian Academy of Sciences (India)

    K K Raina; Pankaj Kumar; Praveen Malik

    2006-11-01

    Liquid crystals dispersed in polymer systems constitute novel class of optical materials. The precise control of the liquid crystal droplet morphology in the polymer matrix is essentially required to meet the prerequisites of display device. Experiments have been carried out to investigate and identify the material properties and processing conditions required for the precise control of the droplet morphology of the dispersed liquid crystal systems. Polarization switching has been studied. Aligned liquid crystal dispersed systems showed higher polarization over unaligned ones.

  15. Liquid crystal interfaces: Experiments, simulations and biosensors

    Science.gov (United States)

    Popov, Piotr

    Interfacial phenomena are ubiquitous and extremely important in various aspects of biological and industrial processes. For example, many liquid crystal applications start by alignment with a surface. The underlying mechanisms of the molecular organization of liquid crystals at an interface are still under intensive study and continue to be important to the display industry in order to develop better and/or new display technology. My dissertation research has been devoted to studying how complex liquid crystals can be guided to organize at an interface, and to using my findings to develop practical applications. Specifically, I have been working on developing biosensors using liquid-crystal/surfactant/lipid/protein interactions as well as the alignment of low-symmetry liquid crystals for potential new display and optomechanical applications. The biotechnology industry needs better ways of sensing biomaterials and identifying various nanoscale events at biological interfaces and in aqueous solutions. Sensors in which the recognition material is a liquid crystal naturally connects the existing knowledge and experience of the display and biotechnology industries together with surface and soft matter sciences. This dissertation thus mainly focuses on the delicate phenomena that happen at liquid interfaces. In the introduction, I start by defining the interface and discuss its structure and the relevant interfacial forces. I then introduce the general characteristics of biosensors and, in particular, describe the design of biosensors that employ liquid crystal/aqueous solution interfaces. I further describe the basic properties of liquid crystal materials that are relevant for liquid crystal-based biosensing applications. In CHAPTER 2, I describe the simulation methods and experimental techniques used in this dissertation. In CHAPTER 3 and CHAPTER 4, I present my computer simulation work. CHAPTER 3 presents insight of how liquid crystal molecules are aligned by

  16. All organic host-guest crystals based on a dumb-bell-shaped conjugated host for light harvesting through resonant energy transfer.

    Science.gov (United States)

    Winkler, Reingard; Berger, Ricarda; Manca, Marianna; Hulliger, Jürg; Weber, Edwin; Loi, Maria A; Botta, Chiara

    2012-01-16

    Together we glow: Fully organic host-guest crystals with two dyes inserted in their parallel nanochannels display broad emission in the visible range thanks to resonant energy transfer. The conjugated host crystal provides light harvesting in the UV region.

  17. Ergonomic concerns with lightbar guidance displays.

    Science.gov (United States)

    Ima, C S; Mann, D D

    2004-05-01

    This article reviews some ergonomic factors associated with agricultural guidance displays. Any technology or management decision that improves the efficiency of an agricultural operation can be considered an aspect of precision farming. Agricultural guidance displays are one such tool because they help to reduce guidance error (i.e., skipping and overlapping of implements within the field), which result in improper application of crop inputs at increased cost. Although each of the guidance displays currently available functions using a different principle, their key objective is to communicate useful guidance information to the operator of the agricultural machine. The case with which the operator obtains the required information depends on a number of ergonomic factors, such as color perceptibility, flash rate, attentional demand, display size, viewing distance, and height of placement of the display in the cab. Ergonomics can be defined as the application of knowledge to create a safe, comfortable, and effective work environment. Consequently, it is critical to consider ergonomics when designing guidance displays or when locating a display in the tractor cab. Without considering ergonomics, it is unlikely that the efficiency of the human-machine system can be optimized.

  18. Touch sensitive electrorheological fluid based tactile display

    Science.gov (United States)

    Liu, Yanju; Davidson, Rob; Taylor, Paul

    2005-12-01

    A tactile display is programmable device whose controlled surface is intended to be investigated by human touch. It has a great number of potential applications in the field of virtual reality and elsewhere. In this research, a 5 × 5 tactile display array including electrorheological (ER) fluid has been developed and investigated. Force responses of the tactile display array have been measured while a probe was moved across the upper surface. The purpose of this was to simulate the action of touch performed by human finger. Experimental results show that the sensed surface information could be controlled effectively by adjusting the voltage activation pattern imposed on the tactels. The performance of the tactile display is durable and repeatable. The touch sensitivity of this ER fluid based tactile display array has also been investigated in this research. The results show that it is possible to sense the touching force normal to the display's surface by monitoring the change of current passing through the ER fluid. These encouraging results are helpful for constructing a new type of tactile display based on ER fluid which can act as both sensor and actuator at the same time.

  19. Military market for flat panel displays

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1997-07-01

    This paper addresses the number, function and size of primary military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, color capability and night vision imaging system capability. A select grouping of funded, future acquisitions, planned and predicted cockpit kits, and form-fit-function upgrades are taken into account. It is the intent of this paper to provide an overview of the DoD niche market, allowing both government and industry a timely reference to insure meeting DoD requirements for flat-panel displays on schedule and in a cost-effective manner. The aggregate DoD market for direct view displays is presently estimated to be in excess of 157,000. Helmet/head mounted displays will add substantially to this total. The vanishing vendor syndrome for older display technologies is becoming a growing, pervasive problem throughout DoD, which consequently just leverage the more modern display technologies being developed for civil-commercial markets.

  20. [Odor sensing system and olfactory display].

    Science.gov (United States)

    Nakamoto, Takamichi

    2014-01-01

    In this review, an odor sensing system and an olfactory display are introduced into people in pharmacy. An odor sensing system consists of an array of sensors with partially overlapping specificities and pattern recognition technique. One of examples of odor sensing systems is a halitosis sensor which quantifies the mixture composition of three volatile sulfide compounds. A halitosis sensor was realized using a preconcentrator to raise sensitivity and an electrochemical sensor array to suppress the influence of humidity. Partial least squares (PLS) method was used to quantify the mixture composition. The experiment reveals that the sufficient accuracy was obtained. Moreover, the olfactory display, which present scents to human noses, is explained. A multi-component olfactory display enables the presentation of a variety of smells. The two types of multi-component olfactory display are described. The first one uses many solenoid valves with high speed switching. The valve ON frequency determines the concentration of the corresponding odor component. The latter one consists of miniaturized liquid pumps and a surface acoustic wave (SAW) atomizer. It enables the wearable olfactory display without smell persistence. Finally, the application of the olfactory display is demonstrated. Virtual ice cream shop with scents was made as a content of interactive art. People can enjoy harmony among vision, audition and olfaction. In conclusion, both odor sensing system and olfactory display can contribute to the field of human health care.

  1. Transparent 3D display for augmented reality

    Science.gov (United States)

    Lee, Byoungho; Hong, Jisoo

    2012-11-01

    Two types of transparent three-dimensional display systems applicable for the augmented reality are demonstrated. One of them is a head-mounted-display-type implementation which utilizes the principle of the system adopting the concave floating lens to the virtual mode integral imaging. Such configuration has an advantage in that the threedimensional image can be displayed at sufficiently far distance resolving the accommodation conflict with the real world scene. Incorporating the convex half mirror, which shows a partial transparency, instead of the concave floating lens, makes it possible to implement the transparent three-dimensional display system. The other type is the projection-type implementation, which is more appropriate for the general use than the head-mounted-display-type implementation. Its imaging principle is based on the well-known reflection-type integral imaging. We realize the feature of transparent display by imposing the partial transparency to the array of concave mirror which is used for the screen of reflection-type integral imaging. Two types of configurations, relying on incoherent and coherent light sources, are both possible. For the incoherent configuration, we introduce the concave half mirror array, whereas the coherent one adopts the holographic optical element which replicates the functionality of the lenslet array. Though the projection-type implementation is beneficial than the head-mounted-display in principle, the present status of the technical advance of the spatial light modulator still does not provide the satisfactory visual quality of the displayed three-dimensional image. Hence we expect that the head-mounted-display-type and projection-type implementations will come up in the market in sequence.

  2. Memory effect in ac plasma displays

    Science.gov (United States)

    Szlenk, K.; Obuchowicz, E.

    1993-10-01

    The bistable or `memory' mode of operation of an ac plasma display panel is presented. The difference between dc and ac plasma panel operation from the point of view of memory function is discussed. The graphic ac plasma display with thin film Cr-Cu-Cr electrodes was developed in OBREP and its basic parameters are described. It consists of 36 X 59 picture elements, its outer dimensions are: 76 X 52 mm2 and the screen size is: 49 X 30 mm2. The different dielectric glass materials were applied as dielectric layers and the influence of the properties of these materials on display parameters and memory function was investigated.

  3. Embedded systems for controlling LED matrix displays

    Science.gov (United States)

    Marghescu, Cristina; Drumea, Andrei

    2016-12-01

    LED matrix displays are a common presence in everyday life - they can be found in trains, buses, tramways, office information tables or outdoor media. The structure of the display unit is similar for all these devices, a matrix of light emitting diodes coupled between row and column lines, but there are many options for the display controller that switches these lines. Present paper analyzes different types of embedded systems that can control the LED matrix, based on single board computers, on microcontrollers with different peripheral devices or with programmable logic devices like field programmable gate arrays with implemented soft processor cores. Scalability, easiness of implementation and costs are analyzed for all proposed solutions.

  4. LCD Projection Display System with High Brightness

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A new compact XGA projection is designed with three 0.99" liquid crystal panels. By using 275W UHP lamp, above 3000 ANSI lumens could be achieved with the uniformity of 85%. The color temperature is 6742K.

  5. Factors Affecting "Ghosting" In Time-Multiplexed Piano-Stereoscopic Crt Display Systems

    Science.gov (United States)

    Lipton, Lenny

    1987-06-01

    Two factors contributing to "ghosting" (image doubling) in plano-stereoscopic CRT displays are phosphor decay and dynamic range of the shutters. A ghosting threshold must be crossed before comfortable fusion can take place. The ghosting threshold changes as image brightness increases and with higher-contrast subjects and those with larger parallax values. Because of the defects of existing liquid crystal shutters, we developed a liquid-crystal shutter with high dynamic range, good transmission, and high speed. With these shutters, residual ghosting is a result of phosphor persistence.

  6. Physically-based modelling of polycrystalline semiconductor devices

    CERN Document Server

    Lee, S

    2000-01-01

    model and characterisation method are introduced to study the effects of the multienergetic trap states on the electrical characteristics of poly-TFTs using CdSe devices as the experimental example, and the electrical parameters such as the density distribution of the trapping states are extracted. The results show excellent agreement between the simulation and experimental data. The limitations of this proposed physical model are also studied and discussed. Thin-film technology using polycrystalline semiconductors has been widely applied to active-matrix-addressed liquid crystal displays (AMLCDs) where thin-film transistors act as digital pixel switches. Research and development is in progress to integrate the driver circuits around the peripheral of the display, resulting in significant cost reduction of connections between rows and columns and the peripheral circuitry. For this latter application, where for instance it is important to control the greyscale voltage level delivered to the pixel, an understan...

  7. Binary colloidal crystals

    NARCIS (Netherlands)

    Christova-Zdravkova, C.G.

    2005-01-01

    Binary crystals are crystals composed of two types of particles having different properties like size, mass density, charge etc. In this thesis several new approaches to make binary crystals of colloidal particles that differ in size, material and charge are reported We found a variety of crystal st

  8. Using high-resolution displays for high-resolution cardiac data.

    Science.gov (United States)

    Goodyer, Christopher; Hodrien, John; Wood, Jason; Kohl, Peter; Brodlie, Ken

    2009-07-13

    The ability to perform fast, accurate, high-resolution visualization is fundamental to improving our understanding of anatomical data. As the volumes of data increase from improvements in scanning technology, the methods applied to visualization must evolve. In this paper, we address the interactive display of data from high-resolution magnetic resonance imaging scanning of a rabbit heart and subsequent histological imaging. We describe a visualization environment involving a tiled liquid crystal display panel display wall and associated software, which provides an interactive and intuitive user interface. The oView software is an OpenGL application that is written for the VR Juggler environment. This environment abstracts displays and devices away from the application itself, aiding portability between different systems, from desktop PCs to multi-tiled display walls. Portability between display walls has been demonstrated through its use on walls at the universities of both Leeds and Oxford. We discuss important factors to be considered for interactive two-dimensional display of large three-dimensional datasets, including the use of intuitive input devices and level of detail aspects.

  9. Speedup of optimization-based approach to local backlight dimming of HDR displays

    DEFF Research Database (Denmark)

    Burini, Nino; Nadernejad, Ehsan; Korhonen, Jari

    2012-01-01

    Local backlight dimming in Liquid Crystal Displays (LCD) is a technique for reducing power consumption and simultaneously increasing contrast ratio to provide a High Dynamic Range (HDR) image reproduction. Several backlight dimming algorithms exist with focus on reducing power consumption, while...... also be beneficial in conjunction with other approaches, such as an algorithm based on gradient descent, also presented here. All the proposals have been compared against other known approaches on simulated edge- and direct-lit displays, and the results show that the optimal distortion level can...

  10. Mixed crystal organic scintillators

    Science.gov (United States)

    Zaitseva, Natalia P; Carman, M Leslie; Glenn, Andrew M; Hamel, Sebastien; Hatarik, Robert; Payne, Stephen A; Stoeffl, Wolfgang

    2014-09-16

    A mixed organic crystal according to one embodiment includes a single mixed crystal having two compounds with different bandgap energies, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source, wherein the signal response signature does not include a significantly-delayed luminescence characteristic of neutrons interacting with the organic crystal relative to a luminescence characteristic of gamma rays interacting with the organic crystal. According to one embodiment, an organic crystal includes bibenzyl and stilbene or a stilbene derivative, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source.

  11. Display depth analyses with the wave aberration for the auto-stereoscopic 3D display

    Science.gov (United States)

    Gao, Xin; Sang, Xinzhu; Yu, Xunbo; Chen, Duo; Chen, Zhidong; Zhang, Wanlu; Yan, Binbin; Yuan, Jinhui; Wang, Kuiru; Yu, Chongxiu; Dou, Wenhua; Xiao, Liquan

    2016-07-01

    Because the aberration severely affects the display performances of the auto-stereoscopic 3D display, the diffraction theory is used to analyze the diffraction field distribution and the display depth through aberration analysis. Based on the proposed method, the display depth of central and marginal reconstructed images is discussed. The experimental results agree with the theoretical analyses. Increasing the viewing distance or decreasing the lens aperture can improve the display depth. Different viewing distances and the LCD with two lens-arrays are used to verify the conclusion.

  12. Photoaligning and photopatterning technology: applications in displays and photonics

    Science.gov (United States)

    Chigrinov, Vladimir

    2016-03-01

    The advantages of LC photoalignment technology in comparison with common "rubbing" alignment methods tend to the continuation of the research in this field. Almost all the criteria of perfect LC alignment are met in case of azo-dye layers. Nowadays azo-dye alignment materials can be already used in LCD manufacturing, e.g. for the alignment of monomers in LCP films for new generations of photonics and optics devices. Recently the new application of photoaligned technology for the tunable LC lenses with a variable focal distance was proposed. New optically rewritable (ORW) liquid crystal display and photonics devices with a light controllable structure may include LC E-paper screens, LC lenses with a variable focal distance etc. Fast ferroelectric liquid crystal devices (FLCD) are achieved through the application of nano-scale photo aligning (PA) layers in FLC cells. The novel photoaligned FLC devices may include field sequential color (FSC) FLC with a high resolution, high brightness, low power consumption and extended color gamut to be used for PCs, PDAs, switchable goggles, and new generation of switchable 2D/3D LCD TVs, as well as photonics elements.

  13. Compressive multi-mode superresolution display

    KAUST Repository

    Heide, Felix

    2014-01-01

    Compressive displays are an emerging technology exploring the co-design of new optical device configurations and compressive computation. Previously, research has shown how to improve the dynamic range of displays and facilitate high-quality light field or glasses-free 3D image synthesis. In this paper, we introduce a new multi-mode compressive display architecture that supports switching between 3D and high dynamic range (HDR) modes as well as a new super-resolution mode. The proposed hardware consists of readily-available components and is driven by a novel splitting algorithm that computes the pixel states from a target high-resolution image. In effect, the display pixels present a compressed representation of the target image that is perceived as a single, high resolution image. © 2014 Optical Society of America.

  14. High Resolution Autostereoscopic Cockpit Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During this Phase II program Dimension Technologies Inc. (DTI) proposes to design and build an autostereoscopic (glasses-free 3D) LCD based aircraft cockpit display...

  15. Projection/Reflection Heads-up Display

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for an extravehicular activity (EVA) information display device, Physical Optics Corporation (POC) proposes to advance development of a new...

  16. Night Vision Device and Cockpit Displays

    Data.gov (United States)

    Federal Laboratory Consortium — The Night Vision Device and Cockpit Display labevaluates night vision devices and certifies them for use in the fleet. Lab functions supported include: Analysis of...

  17. Precarious manhood and displays of physical aggression.

    Science.gov (United States)

    Bosson, Jennifer K; Vandello, Joseph A; Burnaford, Rochelle M; Weaver, Jonathan R; Arzu Wasti, S

    2009-05-01

    The results of three experiments demonstrate that physically aggressive displays are part of men's cultural script for restoring threatened gender status. In Studies 1 and 2, challenges to men's gender status elicited heightened physically aggressive displays, including punching a pad with greater force and selecting an aggressive boxing activity over a nonaggressive puzzle activity. Study 3 established that a public display of aggressive readiness reduced men's anxiety-related cognitions in the wake of a gender threat. This suggests that aggressive displays may function to downregulate negative affect when manhood has been threatened. The discussion considers past research on gender and physical aggression in light of the authors' thesis that manhood, relative to womanhood, is culturally defined as a precarious status that must be actively, even aggressively, defended.

  18. White constancy method for mobile displays

    Science.gov (United States)

    Yum, Ji Young; Park, Hyun Hee; Jang, Seul Ki; Lee, Jae Hyang; Kim, Jong Ho; Yi, Ji Young; Lee, Min Woo

    2014-03-01

    In these days, consumer's needs for image quality of mobile devices are increasing as smartphone is widely used. For example, colors may be perceived differently when displayed contents under different illuminants. Displayed white in incandescent lamp is perceived as bluish, while same content in LED light is perceived as yellowish. When changed in perceived white under illuminant environment, image quality would be degraded. Objective of the proposed white constancy method is restricted to maintain consistent output colors regardless of the illuminants utilized. Human visual experiments are performed to analyze viewers'perceptual constancy. Participants are asked to choose the displayed white in a variety of illuminants. Relationship between the illuminants and the selected colors with white are modeled by mapping function based on the results of human visual experiments. White constancy values for image control are determined on the predesigned functions. Experimental results indicate that propsed method yields better image quality by keeping the display white.

  19. Bioadsorption strategies with yeast molecular display technology.

    Science.gov (United States)

    Shibasaki, Seiji; Ueda, Mitsuyoshi

    2014-01-01

    Molecular display techniques using microbial cell surfaces have been widely developed in the past twenty years, and are useful tools as whole cell catalysts for various applications such as bioconversion, bioremediation, biosensing, and the screening system of protein libraries. Furthermore, different types of microbial cells among eukaryotic and prokaryotic strains have been investigated for their use in surface display technologies. Recently, several kinds of protein-displaying yeasts have been utilized as bioadsorbents in this platform technology. In particular, these trials have successfully expanded the possibility of applications to metal binding, affinity purification, and receptor-ligand interaction by using the yeast cell surface. In this mini review, we describe the general principles of molecular display technology using yeast cells and its applications, with a particular focus on bioadsorption.

  20. Are tiled display walls needed for astronomy?

    CERN Document Server

    Meade, Bernard F; Manos, Steven; Sinnott, Richard O

    2014-01-01

    Clustering commodity displays into a Tiled Display Wall (TDW) provides a cost-effective way to create an extremely high resolution display, capable of approaching the image sizes now gen- erated by modern astronomical instruments. Astronomers face the challenge of inspecting single large images, many similar images simultaneously, and heterogeneous but related content. Many research institutions have constructed TDWs on the basis that they will improve the scientific outcomes of astronomical imagery. We test this concept by presenting sample images to astronomers and non- astronomers using a standard desktop display (SDD) and a TDW. These samples include standard English words, wide field galaxy surveys and nebulae mosaics from the Hubble telescope. These experiments show that TDWs provide a better environment for searching for small targets in large images than SDDs. It also shows that astronomers tend to be better at searching images for targets than non-astronomers, both groups are generally better when em...

  1. [Review of visual display system in flight simulator].

    Science.gov (United States)

    Xie, Guang-hui; Wei, Shao-ning

    2003-06-01

    Visual display system is the key part and plays a very important role in flight simulators and flight training devices. The developing history of visual display system is recalled and the principle and characters of some visual display systems including collimated display systems and back-projected collimated display systems are described. The future directions of visual display systems are analyzed.

  2. Reduce volume of head-up display by image stitching

    Science.gov (United States)

    Chiu, Yi-Feng; Su, Guo-Dung J.

    2016-09-01

    Head-up Display (HUD) is a safety feature for automobile drivers. Although there have been some HUD systems in commercial product already, their images are too small to show assistance information. Another problem, the volume of HUD is too large. We proposed a HUD including micro-projectors, rear-projection screen, microlens array (MLA) and the light source is 28 mm x 14 mm realized a 200 mm x 100 mm image in 3 meters from drivers. We want to use the MLA to reduce the volume by virtual image stitching. We design the HUD's package dimensions is 12 cm x 12 cm x 9 cm. It is able to show speed, map-navigation and night vision information. We used Liquid Crystal Display (LCD) as our image source due to its brighter image output required and the minimum volume occupancy. The MLA is a multi aperture system. The proposed MLA consists of many optical channels each transmitting a segment of the whole field of view. The design of the system provides the stitching of the partial images, so that we can see the whole virtual image.

  3. Tiled large-screen three-dimensional display consisting of frameless multi-view display modules.

    Science.gov (United States)

    Takaki, Yasuhiro; Tokoro, Masayuki; Hirabayashi, Kenji

    2014-03-24

    To realize large-screen three-dimensional (3D) displays, frameless multi-view display modules are arranged two-dimensionally. This paper proposes a multi-view display module in which a multi-view flat-panel display is projected onto a screen of the module to provide a frameless screen. The display module consists of a multi-view flat-panel display, an imaging lens, an aperture, a screen lens, and a vertical diffuser. Prototype display modules were constructed having a screen size of 27.3 in., a 3D resolution of 320 × 200, and 144 viewpoints. Four modules were tiled vertically to provide a screen size of 62.4 in. Distortions in the screen imaging and viewpoint generation were corrected.

  4. Pressure cryocooling protein crystals

    Science.gov (United States)

    Kim, Chae Un; Gruner, Sol M.

    2011-10-04

    Preparation of cryocooled protein crystal is provided by use of helium pressurizing and cryocooling to obtain cryocooled protein crystal allowing collection of high resolution data and by heavier noble gas (krypton or xenon) binding followed by helium pressurizing and cryocooling to obtain cryocooled protein crystal for collection of high resolution data and SAD phasing simultaneously. The helium pressurizing is carried out on crystal coated to prevent dehydration or on crystal grown in aqueous solution in a capillary.

  5. Routing and advanced display technologies within STOMPM

    Science.gov (United States)

    Mittu, Ranjeev; Uhlmann, Jeffrey K.; McCune, Justin

    1998-08-01

    This paper will discuss research conducted at the Naval Research Laboratory in the area of automated routing, advanced 3D displays and novel interface techniques for interacting with those displays. This research has culminated in the development of the strike optimized mission planing module (STOMPM). The STOMPM testbed incorporates new technologies/results in the aforementioned areas to address the deficiencies in current systems and advance the state of the art in military planing systems.

  6. Beacon data acquisition and display system

    Science.gov (United States)

    Skogmo, David G.; Black, Billy D.

    1991-01-01

    A system for transmitting aircraft beacon information received by a secondary surveillance radar through telephone lines to a remote display includes a digitizer connected to the radar for preparing a serial file of data records containing position and identification information of the beacons detected by each sweep of the radar. This information is transmitted through the telephone lines to a remote computer where it is displayed.

  7. Large-scale autostereoscopic outdoor display

    Science.gov (United States)

    Reitterer, Jörg; Fidler, Franz; Saint Julien-Wallsee, Ferdinand; Schmid, Gerhard; Gartner, Wolfgang; Leeb, Walter; Schmid, Ulrich

    2013-03-01

    State-of-the-art autostereoscopic displays are often limited in size, effective brightness, number of 3D viewing zones, and maximum 3D viewing distances, all of which are mandatory requirements for large-scale outdoor displays. Conventional autostereoscopic indoor concepts like lenticular lenses or parallax barriers cannot simply be adapted for these screens due to the inherent loss of effective resolution and brightness, which would reduce both image quality and sunlight readability. We have developed a modular autostereoscopic multi-view laser display concept with sunlight readable effective brightness, theoretically up to several thousand 3D viewing zones, and maximum 3D viewing distances of up to 60 meters. For proof-of-concept purposes a prototype display with two pixels was realized. Due to various manufacturing tolerances each individual pixel has slightly different optical properties, and hence the 3D image quality of the display has to be calculated stochastically. In this paper we present the corresponding stochastic model, we evaluate the simulation and measurement results of the prototype display, and we calculate the achievable autostereoscopic image quality to be expected for our concept.

  8. A new type of multiview display

    Science.gov (United States)

    Jurk, Silvio; Kuhlmey, Mathias; de la Barré, René

    2015-03-01

    The common architecture of multi-view autostereoscopic displays assigns a nominal viewing distance. The design affects the convergence of the visible rays at a nominal viewing distance where diamond shaped viewing zones are created. In contrast to this approach, the authors present a new design strategy departing from the geometric relations of common 3D display designs. They show that a beam emitted from a sub-pixel should be rendered with an individual camera direction determined by an algorithm. This algorithm also uses, besides the parameters of the display design, the desired viewing distance and the allowed increments of the camera angle. This enables very flexible designs of autostereoscopic displays. The main difference from the common multiview display is that its design approach enables a continued viewing zone without the usually diamond shaped sweet spots. The algorithm for controlling the rendering and the multiplexing is generic, as well as for integral and multiview design approaches using an image splitter raster. The paper introduces it for autostereoscopic displays with horizontal parallax.

  9. Methodologies for the evaluation of CRT displays

    Energy Technology Data Exchange (ETDEWEB)

    Blackman, H.S.

    1986-01-01

    This paper presents the results of a series of experiments that have been conducted by the Human Factors Research Branch for the purpose of developing objective methods that will be used to evaluate the effectiveness of cathode ray tube (CRT) generated displays in improving reactor operator performance. The results of this work can provide a basis for the United States Nuclear Regulatory Commission (USNRC) to objectively evaluate specific licensee-developed display designs. The following methods have been developed: (1) Psychophysics - short exposure of static display types were presented to subjects who were tasked to report status of a given parameter; (2) Multidimensional Rating Scale - paper and pencil instrument employed by subjects to rate the features of a display type across a variety of psychological dimensions; (3) Checklist Evaluation - a paper and pencil instrument employed by subjects to assess particular display types according to a set of human engineering criteria; (4) Noninteractive Evaluation - a formal experiment where the subjects were requested to identify dynamic simulated transients using various display types; and (5) Interactive Evaluation - similar to the noninteractive, but the subjects interacted with the simulator using a touch screen to mitigate transient events.

  10. Oil defect detection of electrowetting display

    Science.gov (United States)

    Chiang, Hou-Chi; Tsai, Yu-Hsiang; Yan, Yung-Jhe; Huang, Ting-Wei; Mang, Ou-Yang

    2015-08-01

    In recent years, transparent display is an emerging topic in display technologies. Apply in many fields just like mobile device, shopping or advertising window, and etc. Electrowetting Display (EWD) is one kind of potential transparent display technology advantages of high transmittance, fast response time, high contrast and rich color with pigment based oil system. In mass production process of Electrowetting Display, oil defects should be found by Automated Optical Inspection (AOI) detection system. It is useful in determination of panel defects for quality control. According to the research of our group, we proposed a mechanism of AOI detection system detecting the different kinds of oil defects. This mechanism can detect different kinds of oil defect caused by oil overflow or material deteriorated after oil coating or driving. We had experiment our mechanism with a 6-inch Electrowetting Display panel from ITRI, using an Epson V750 scanner with 1200 dpi resolution. Two AOI algorithms were developed, which were high speed method and high precision method. In high precision method, oil jumping or non-recovered can be detected successfully. This mechanism of AOI detection system can be used to evaluate the oil uniformity in EWD panel process. In the future, our AOI detection system can be used in quality control of panel manufacturing for mass production.

  11. [Peptide phage display in biotechnology and biomedicine].

    Science.gov (United States)

    Kuzmicheva, G A; Belyavskaya, V A

    2016-07-01

    To date peptide phage display is one of the most common combinatorial methods used for identifying specific peptide ligands. Phage display peptide libraries containing billions different clones successfully used for selection of ligands with high affinity and selectivity toward wide range of targets including individual proteins, bacteria, viruses, spores, different kind of cancer cells and variety of nonorganic targets (metals, alloys, semiconductors etc.) Success of using filamentous phage in phage display technologies relays on the robustness of phage particles and a possibility to genetically modify its DNA to construct new phage variants with novel properties. In this review we are discussing characteristics of the most known non-commercial peptide phage display libraries of different formats (landscape libraries in particular) and their successful applications in several fields of biotechnology and biomedicine: discovery of peptides with diagnostic values against different pathogens, discovery and using of peptides recognizing cancer cells, trends in using of phage display technologies in human interactome studies, application of phage display technologies in construction of novel nano materials.

  12. Structural Color Patterns by Electrohydrodynamic Jet Printed Photonic Crystals.

    Science.gov (United States)

    Ding, Haibo; Zhu, Cun; Tian, Lei; Liu, Cihui; Fu, Guangbin; Shang, Luoran; Gu, Zhongze

    2017-02-09

    In this work, we demonstrate the fabrication of photonic crystal patterns with controllable morphologies and structural colors utilizing electrohydrodynamic jet (E-jet) printing with colloidal crystal inks. The final shape of photonic crystal units is controlled by the applied voltage signal and wettability of the substrate. Optical properties of the structural color patterns are tuned by the self-assembly of the silica nanoparticle building blocks. Using this direct printing technique, it is feasible to print customized functional patterns composed of photonic crystal dots or photonic crystal lines according to relevant printing mode and predesigned tracks. This is the first report for E-jet printing with colloidal crystal inks. Our results exhibit promising applications in displays, biosensors, and other functional devices.

  13. Latest developments of dynamic holographic three-dimensional display%动态全息三维显示研究最新进展∗

    Institute of Scientific and Technical Information of China (English)

    曾超; 高洪跃; 刘吉成; 于瀛洁; 姚秋香; 刘攀; 郑华东; 曾震湘

    2015-01-01

    Holographic three-dimensional (3D) display is a true 3D display technique, which can provide realistic image of a real object or a scene because holography has the ability to reconstruct both the intensity and phase information, i.e., the wave front of the object or scene. Therefore, it could allow the observers to perceive the light as it is scattered by the real object itself without any special eyewear, which is quite different from other 3D display techniques, such as stereoscopic displays and volumetric 3D displays. In this paper, the achievements and developments of the latest new holographic 3D displays are presented. Holographic 3D displays can be divided into static holographic 3D displays and dynamic holographic 3D displays. Here, we briefly introduce the principle of holographic 3D display technique and static holographic 3D displays, and focus on dynamic holographic 3D displays. Large-size, high-resolution and color static holographic 3D displays have already been successfully fabricated and applied in some areas, such as holographic 3D maps and holographic 3D images. However, dynamic holographic 3D displays based on both optical materials and spatial light modulators (SLMs) are still under research, which is a challenge to their applications. Some holographic researchers study the holographic 3D displays based on the SLMs for large-size and large view angle display, but it is difficult to realize them because of limitations of SLMs and there still needs much effort to solve these problems in SLMs. Other holographic researchers work on dynamic holographic materials, such as inorganic crystals, photorefractive polymer, photochromic material etc. The response time and diffraction efficiency are key factors to these materials. Compared with other holographic media, liquid crystals with super-fast response time (about 1 ms) have been reported, which makes it possible to realize video refresh-rate holographic displays. The achievements of dynamic holography

  14. IR Sensor Synchronizing Active Shutter Glasses for 3D HDTV with Flexible Liquid Crystal Lenses

    Directory of Open Access Journals (Sweden)

    Jeong In Han

    2013-12-01

    Full Text Available IR sensor synchronizing active shutter glasses for three-dimensional high definition television (3D HDTV were developed using a flexible liquid crystal (FLC lens. The FLC lens was made on a polycarbonate (PC substrate using conventional liquid crystal display (LCD processes. The flexible liquid crystal lens displayed a maximum transmission of 32% and total response time of 2.56 ms. The transmittance, the contrast ratio and the response time of the flexible liquid crystal lens were superior to those of glass liquid crystal lenses. Microcontroller unit and drivers were developed as part of a reception module with power supply for the IR sensor synchronizing active shutter glasses with the flexible liquid crystal lens prototypes. IR sensor synchronizing active shutter glasses for 3D HDTV with flexible liquid crystal lenses produced excellent 3D images viewing characteristics.

  15. Electroholographic display unit for three-dimensional display by use of special-purpose computational chip for holography and reflective LCD panel.

    Science.gov (United States)

    Shimobaba, Tomoyoshi; Shiraki, Atsushi; Masuda, Nobuyuki; Ito, Tomoyoshi

    2005-05-30

    We developed an electroholography unit, which consists of a special-purpose computational chip for holography and a reflective liquid-crystal display (LCD) panel, for a three-dimensional (3D) display. The special-purpose chip can compute a computer-generated hologram of 800x600 grids in size from a 3D object consisting of approximately 400 points in approximately 0.15 seconds. The pixel pitch and resolution of the LCD panel are 12 mum and 800x600 grids, respectively. We implemented the special purpose chip and LCD panel on a printed circuit board of approximately 28cmx13cm in size. After the calculation, the computer-generated hologram produced by the special-purpose chip is displayed on the LCD panel. When we illuminate a reference light to the LCD panel, we can observe a 3D animation of approximately 3cmx3cmx3cm in size. In the present paper, we report the electroholographic display unit together with a simple 3D display system.

  16. Tactile display with dielectric multilayer elastomer actuatorsq

    Science.gov (United States)

    Matysek, Marc; Lotz, Peter; Schlaak, Helmut F.

    2009-03-01

    Tactile perception is the human sensation of surface textures through the vibrations generated by stroking a finger over the surface. The skin responds to several distributed physical quantities. Perhaps the most important are high-frequency vibrations, pressure distributions (static shape) and thermal properties. The integration of tactile displays in man-machine interfaces promises a more intuitive handling. For this reason many tactile displays are developed using different technologies. We present several state-of-the-art tactile displays based on different types of dielectric elastomer actuators to clarify the advantages of our matrix display based on multilayer technology. Using this technology perpendicular and hexagonal arrays of actuator elements (tactile stimulators) can be integrated into a PDMS substrate. Element diameters down to 1 mm allow stimuli at the range of the human two-point-discrimination threshold. Driving the elements by column and row addressing enables various stimulation patterns with a reduced number of feeding lines. The transient analysis determines charging times of the capacitive actuators depending on actuator geometry and material parameters. This is very important to ensure an adequate dynamic characteristic of the actuators to stimulate the human skin by vibrations. The suitability of multilayer dielectric elastomer actuators for actuation in tactile displays has been determined. Beside the realization of a static tactile display - where multilayer DEA are integrated as drives for movable contact pins - we focus on the direct use of DEA as a vibrotactile display. Finally, we present the scenario and achieved results of a recognition threshold test. Even relative low voltages in the range of 800 V generate vibrations with 100% recognition ratio within the group of participants. Furthermore, the frequency dependent characteristic of the determined recognition threshold confirms with established literature.

  17. Robustness of average Stokes polarimetry characterization of digitally addressed parallel-aligned LCoS displays

    OpenAIRE

    Martínez Guardiola, Francisco Javier; Márquez Ruiz, Andrés; Gallego Rico, Sergi; Ortuño Sánchez, Manuel; Francés Monllor, Jorge; Beléndez Vázquez, Augusto; Pascual Villalobos, Inmaculada

    2014-01-01

    Parallel-aligned liquid crystal on silicon (PA-LCoS) displays have become the most attractive spatial light modulator device for a wide range of applications, due to their superior resolution and light efficiency, added to their phase-only capability. Recently we proposed a novel polarimetric method, based on Stokes polarimetry, enabling the characterization of their linear retardance and the magnitude of their associated phase fluctuations, if existent, as it happens in most of digital backp...

  18. Color changing plasmonic surfaces utilizing liquid crystal (Conference Presentation)

    Science.gov (United States)

    Franklin, Daniel; Wu, Shin-Tson; Chanda, Debashis

    2016-09-01

    Plasmonic structural color has recently garnered significant interest as an alternative to the organic dyes standard in print media and liquid crystal displays. These nanostructured metallic systems can produce diffraction limited images, be made polarization dependent, and exhibit resistance to color bleaching. Perhaps even more advantageous, their optical characteristics can also be tuned, post-fabrication, by altering the surrounding media's refractive index parallel to the local plasmonic fields. A common material with which to achieve this is liquid crystal. By reorienting the liquid crystal molecules through external electric fields, the optical resonances of the plasmonic filters can be dynamically controlled. Demonstrations of this phenomenon, however, have been limited to modest shifts in plasmon resonance. Here, we report a liquid crystal-plasmonic system with an enhanced tuning range through the use of a shallow array of nano-wells and high birefringent liquid crystal. The continuous metallic nanostructure maximizes the overlap between plasmonic fields and liquid crystal while also allowing full reorientation of the liquid crystal upon an applied electric field. Sweeping over structural dimensions and voltages results in a color palette for these dynamic reflective pixels that can further be exploited to create color tunable images. These advances make plasmonic-liquid crystal systems more attractive candidates for filter, display, and other tunable optical technologies.

  19. A Study of Ca-Mg Silicate Crystalline Glazes--An Analysis on Forms of Crystals

    Institute of Scientific and Technical Information of China (English)

    LIU Pei-de; YU Ping-li; WU Ji-huai

    2004-01-01

    In the study on Ca-Mg silicate crystalline glazes, we found some disequilibrated crystallization phenomena,such as non-crystallographic small angle forking and spheroidal growth, parasitism and wedging-form of crystals, dendritic growth, secondary nucleation, etc. Those phenomena possibly resulted from two factors:(1) partial temperature gradient, which is caused by heat asymmetry in the electrical resistance furnace,when crystals crystalize from silicate melt ; (2) constitutional supercooling near the surface of crystals. The disparity of disequilibrated crystallization phenomena in different main crystalline phases causes various morphological features of the crystal aggregates. At the same time, disequilibrated crystallization causes great stress retained in the crystals, which results in cracks in glazes when the temperature drops. According to the results, the authors analyzed those phenomena and displayed correlative figures and data.

  20. Holographic Reversed-Mode Polymer-Stabilized Liquid Crystal Grating

    Institute of Scientific and Technical Information of China (English)

    MA Ji; SONG Jing; LIU Yong-Gang; RUAN Sheng-Ping; XUAN Li

    2005-01-01

    @@ We demonstrate the "reversed-mode" polymer-stabilized liquid crystal device. The incidence light goes through the film without the applied voltage and is diffracted with it. Because of relatively high liquid crystal percentage of 94%, the operating voltage of the device is less than 20 V. We explain this phenomenon using the molecularorientation model and the refractive index profile. The device can be used as display, optical switch, optical modulator and especially optical cross-connect deflector.

  1. CRYSTALLIZATION IN MULTICOMPONENT GLASSES

    Energy Technology Data Exchange (ETDEWEB)

    KRUGER AA; HRMA PR

    2009-10-08

    In glass processing situations involving glass crystallization, various crystalline forms nucleate, grow, and dissolve, typically in a nonuniform temperature field of molten glass subjected to convection. Nuclear waste glasses are remarkable examples of multicomponent vitrified mixtures involving partial crystallization. In the glass melter, crystals form and dissolve during batch-to-glass conversion, melter processing, and product cooling. Crystals often agglomerate and sink, and they may settle at the melter bottom. Within the body of cooling glass, multiple phases crystallize in a non-uniform time-dependent temperature field. Self-organizing periodic distribution (the Liesegnang effect) is common. Various crystallization phenomena that occur in glass making are reviewed.

  2. Viscoelastic modes in chiral liquid crystals

    Indian Academy of Sciences (India)

    K A Suresh

    2003-08-01

    Viscoelastic properties of liquid crystals are very important for applications like display technology. However, there are not many direct techniques to study them. In this review, we describe our studies on the viscoelastic modes of some chiral liquid crystals using dynamic light scattering. We discuss viscoelastic modes corresponding to the C director fluctuations in the chiral smectic C phase and the behaviour of the Goldstone-mode near the chiral smectic C–smectic A phase transition. In cholesteric liquid crystals, we consider the director fluctuations in a wavevector range comparable to the inverse pitch of the cholesteric. Here, the study of the scattered light in the vicinity of the Bragg reflection using a novel geometry will be presented.

  3. Photonics and lasing in liquid crystals

    Directory of Open Access Journals (Sweden)

    Alison D. Ford

    2006-07-01

    Full Text Available Lasers were invented some 40 years ago and are now used in a plethora of applications. Stable liquid crystals were discovered at about the same time, and are now the basis of a large display industry. Both technologies involve photonics, the former in the creation and use of light and the latter in the control and manipulation of light. However, it is only recently that these two mature technologies have been combined to form liquid-crystal lasers, heralding a new era for these photonic materials and the potential for novel applications. We summarize the characteristics of liquid crystals that lead to laser devices, the wide diversity of possible laser systems, and the properties of the light produced.

  4. Identifying Suitable Projection Parameters and Display Configurations for Mobile True-3D Displays

    OpenAIRE

    Serrano, Marcos; Hildebrandt, Dale; Subramanian, Sriram; Irani, Pourang

    2014-01-01

    International audience; We present a two-part exploration on mobile true-3D displays, i.e. displaying volumetric 3D content in mid-air. We first identify and study the parameters of a mobile true-3D projection, in terms of the projection's distance to the phone, angle to the phone, display volume and position within the display. We identify suitable parameters and constraints, which we propose as requirements for developing mobile true-3D systems. We build on the first outcomes to explore met...

  5. Polarity effect in electrovibration for tactile display.

    Science.gov (United States)

    Kaczmarek, Kurt A; Nammi, Krishnakant; Agarwal, Abhishek K; Tyler, Mitchell E; Haase, Steven J; Beebe, David J

    2006-10-01

    Electrovibration is the tactile sensation of an alternating potential between the human body and a smooth conducing surface when the skin slides over the surface and where the current is too small to stimulate sensory nerves directly. It has been proposed as a high-density tactile display method, for example to display pictographic information to persons who are blind. Previous models for the electrovibration transduction mechanism are based on a parallel-plate capacitor in which the electrostatic force is insensitive to polarity. We present experimental data showing that electrovibratory perceptual sensitivity to positive pulses is less than that for negative or biphasic pulses and propose that this disparity may be due to the asymmetric electrical properties of human skin. We furthermore propose using negative pulses for insulated tactile displays based on electrovibration because their sensory thresholds were found to be more stable than for waveforms incorporating positive pulses.

  6. The design of electronic map displays

    Science.gov (United States)

    Aretz, Anthony J.

    1991-01-01

    This paper presents a cognitive analysis of a pilot's navigation task and describes an experiment comparing a new map display that employs the principle of visual momentum with the two traditional approaches, track-up and north-up. The data show that the advantage of a track-up alignment is its congruence with the egocentered forward view; however, the inconsistency of the rotating display hinders development of a cognitive map. The stability of a north-up alignment aids the acquisition of a cognitive map, but there is a cost associated with the mental rotation of the display to a track-up alignment for tasks involving the ego-centered forward view. The data also show that the visual momentum design captures the benefits and reduces the costs associated with the two traditional approaches.

  7. Optical scanning holography for stereoscopic display

    Science.gov (United States)

    Liu, Jung-Ping; Wen, Hsuan-Hsuan

    2016-10-01

    Optical Scanning Holography (OSH) is a scanning-type digital holographic recording technique. One of OSH's most important properties is that the OSH can record an incoherent hologram, which is free of speckle and thus is suitable for the applications of holographic display. The recording time of a scanning hologram is proportional to the sampling resolution. Hence the viewing angle as well as the resolution of a scanning hologram is limited for avoid too long recording. As a result, the viewing angle is not large enough for optical display. To solve this problem, we recorded two scanning holograms at different viewing angles. The two holograms are synthesized to a single stereoscopic hologram with two main viewing angles. In displaying, two views at the two main viewing angles are reconstructed. Because both views contain full-depth-resolved 3D scenes, the problem of accommodation conflict in conventional stereogram is avoided.

  8. High performance visual display for HENP detectors

    CERN Document Server

    McGuigan, M; Spiletic, J; Fine, V; Nevski, P

    2001-01-01

    A high end visual display for High Energy Nuclear Physics (HENP) detectors is necessary because of the sheer size and complexity of the detector. For BNL this display will be of special interest because of STAR and ATLAS. To load, rotate, query, and debug simulation code with a modern detector simply takes too long even on a powerful work station. To visualize the HENP detectors with maximal performance we have developed software with the following characteristics. We develop a visual display of HENP detectors on BNL multiprocessor visualization server at multiple level of detail. We work with general and generic detector framework consistent with ROOT, GAUDI etc, to avoid conflicting with the many graphic development groups associated with specific detectors like STAR and ATLAS. We develop advanced OpenGL features such as transparency and polarized stereoscopy. We enable collaborative viewing of detector and events by directly running the analysis in BNL stereoscopic theatre. We construct enhanced interactiv...

  9. Issues in defense training systems immersive displays

    Science.gov (United States)

    Gaylord, Philip

    2006-05-01

    Display technology for DOD immersive projector-based flight training systems are at a crossroads as CRT technology slowly disappears from the market place. From the DOD perspective, emerging technologies arrive poorly matched to satisfy training needs. The DOD represents a minority voice in the marketplace. Current issues include: Satisfying requirements for black level, brightness and contrast ratio, Establishing standard metrics for resolution, system performance and reliability, Obtaining maintainability and self-calibration in multi-channel arrays, Reducing screen cross-reflection in wrap-around immersive display arrays. Laser, DLP, and LCOS projector systems are compared for their current acceptance and problems in defense flight training systems. General requirements of visual display systems are discussed and contrasted for flight trainers for low flyers (helicopters) high flyers (tactical aircraft) in real-time immersive, networked systems. FLIR and NVG simulation techniques are described.

  10. Interacting on and around Large Displays

    DEFF Research Database (Denmark)

    Markussen, Anders

    of content that reside outside the display boundaries, taking advantage of users’ perceived location of off-screen content. Off-Limits was found to provide significant benefits over touch-based interaction. The results show that an extension of interactions beyond the boundaries of the display can increase......), a previously successfully text entry method for touch- and pen-based input, to work as a technique for mid-air text entry. With a text entry rate of 20.6 WPM after 10 sessions of text entry, the mid-air WGK provided faster text entry rates than previously evaluated methods for mid-air text entry. An improved....... To improve understanding of the differences between input modalities for large displays, the mid-air WGK was compared to a touch-based functionally equivalent WGK. The touch-based keyboard was found to be significantly faster than the mid-air WGK, indicating that touch based interaction may be preferable...

  11. Pilot Preferences on Displayed Aircraft Control Variables

    Science.gov (United States)

    Trujillo, Anna C.; Gregory, Irene M.

    2013-01-01

    The experiments described here explored how pilots want available maneuver authority information transmitted and how this information affects pilots before and after an aircraft failure. The aircraft dynamic variables relative to flight performance were narrowed to energy management variables. A survey was conducted to determine what these variables should be. Survey results indicated that bank angle, vertical velocity, and airspeed were the preferred variables. Based on this, two displays were designed to inform the pilot of available maneuver envelope expressed as bank angle, vertical velocity, and airspeed. These displays were used in an experiment involving control surface failures. Results indicate the displayed limitations in bank angle, vertical velocity, and airspeed were helpful to the pilots during aircraft surface failures. However, the additional information did lead to a slight increase in workload, a small decrease in perceived aircraft flying qualities, and no effect on aircraft situation awareness.

  12. [Current situations and problems of quality control for medical imaging display systems].

    Science.gov (United States)

    Shibutani, Takayuki; Setojima, Tsuyoshi; Ueda, Katsumi; Takada, Katsumi; Okuno, Teiichi; Onoguchi, Masahisa; Nakajima, Tadashi; Fujisawa, Ichiro

    2015-04-01

    Diagnostic imaging has been shifted rapidly from film to monitor diagnostic. Consequently, Japan medical imaging and radiological systems industries association (JIRA) have recommended methods of quality control (QC) for medical imaging display systems. However, in spite of its need by majority of people, executing rate is low. The purpose of this study was to validate the problem including check items about QC for medical imaging display systems. We performed acceptance test of medical imaging display monitors based on Japanese engineering standards of radiological apparatus (JESRA) X-0093*A-2005 to 2009, and performed constancy test based on JESRA X-0093*A-2010 from 2010 to 2012. Furthermore, we investigated the cause of trouble and repaired number. Medical imaging display monitors had 23 inappropriate monitors about visual estimation, and all these monitors were not criteria of JESRA about luminance uniformity. Max luminance was significantly lower year-by-year about measurement estimation, and the 29 monitors did not meet the criteria of JESRA about luminance deviation. Repaired number of medical imaging display monitors had 25, and the cause was failure liquid crystal panel. We suggested the problems about medical imaging display systems.

  13. Designing a high accuracy 3D auto stereoscopic eye tracking display, using a common LCD monitor

    Science.gov (United States)

    Taherkhani, Reza; Kia, Mohammad

    2012-09-01

    This paper describes the design and building of a low cost and practical stereoscopic display that does not need to wear special glasses, and uses eye tracking to give a large degree of freedom to viewer (or viewer's) movement while displaying the minimum amount of information. The parallax barrier technique is employed to turn a LCD into an auto-stereoscopic display. The stereo image pair is screened on the usual liquid crystal display simultaneously but in different columns of pixels. Controlling of the display in red-green-blue sub pixels increases the accuracy of light projecting direction to less than 2 degrees without losing too much LCD's resolution and an eye-tracking system determines the correct angle to project the images along the viewer's eye pupils and an image processing system puts the 3D images data in correct R-G-B sub pixels. 1.6 degree of light direction controlling achieved in practice. The 3D monitor is just made by applying some simple optical materials on a usual LCD display with normal resolution. [Figure not available: see fulltext.

  14. Imaging acquisition display performance: an evaluation and discussion of performance metrics and procedures.

    Science.gov (United States)

    Silosky, Michael S; Marsh, Rebecca M; Scherzinger, Ann L

    2016-07-08

    When The Joint Commission updated its Requirements for Diagnostic Imaging Services for hospitals and ambulatory care facilities on July 1, 2015, among the new requirements was an annual performance evaluation for acquisition workstation displays. The purpose of this work was to evaluate a large cohort of acquisition displays used in a clinical environment and compare the results with existing performance standards provided by the American College of Radiology (ACR) and the American Association of Physicists in Medicine (AAPM). Measurements of the minimum luminance, maximum luminance, and luminance uniformity, were performed on 42 acquisition displays across multiple imaging modalities. The mean values, standard deviations, and ranges were calculated for these metrics. Additionally, visual evaluations of contrast, spatial resolution, and distortion were performed using either the Society of Motion Pictures and Television Engineers test pattern or the TG-18-QC test pattern. Finally, an evaluation of local nonuniformities was performed using either a uniform white display or the TG-18-UN80 test pattern. Displays tested were flat panel, liquid crystal displays that ranged from less than 1 to up to 10 years of use and had been built by a wide variety of manufacturers. The mean values for Lmin and Lmax for the displays tested were 0.28 ± 0.13 cd/m2 and 135.07 ± 33.35 cd/m2, respectively. The mean maximum luminance deviation for both ultrasound and non-ultrasound displays was 12.61% ± 4.85% and 14.47% ± 5.36%, respectively. Visual evaluation of display performance varied depending on several factors including brightness and contrast settings and the test pattern used for image quality assessment. This work provides a snapshot of the performance of 42 acquisition displays across several imaging modalities in clinical use at a large medical center. Comparison with existing performance standards reveals that changes in display technology and the move from cathode ray

  15. Automated Detection of Conformational Epitopes Using Phage Display Peptide Sequences

    Directory of Open Access Journals (Sweden)

    Surendra S Negi

    2009-01-01

    Full Text Available Background: Precise determination of conformational epitopes of neutralizing antibodies represents a key step in the rational design of novel vaccines. A powerful experimental method to gain insights on the physical chemical nature of conformational epitopes is the selection of linear peptides that bind with high affinities to a monoclonal antibody of interest by phage display technology. However, the structural characterization of conformational epitopes from these mimotopes is not straightforward, and in the past the interpretation of peptide sequences from phage display experiments focused on linear sequence analysis to find a consensus sequence or common sequence motifs.Results: We present a fully automated search method, EpiSearch that predicts the possible location of conformational epitopes on the surface of an antigen. The algorithm uses peptide sequences from phage display experiments as input, and ranks all surface exposed patches according to the frequency distribution of similar residues in the peptides and in the patch. We have tested the performance of the EpiSearch algorithm for six experimental data sets of phage display experiments, the human epidermal growth factor receptor-2 (HER-2/neu, the antibody mAb Bo2C11 targeting the C2 domain of FVIII, antibodies mAb 17b and mAb b12 of the HIV envelope protein gp120, mAb 13b5 targeting HIV-1 capsid protein and 80R of the SARS coronavirus spike protein. In all these examples the conformational epitopes as determined by the X-ray crystal structures of the antibody-antigen complexes, were found within the highest scoring patches of EpiSearch, covering in most cases more than 50% residues of experimental observed conformational epitopes. Input options of the program include mapping of a single peptide or a set of peptides on the antigen structure, and the results of the calculation can be visualized on our interactive web server.Availability: Users can access the EpiSearch from our web

  16. Photonic thin film fabrication and characterization for display applications

    Science.gov (United States)

    Sun, Xiaowei

    In this thesis, the fabrication and characterization of various kinds of thin films useful for display applications are discussed. The fabrication technique used was mainly pulsed laser deposition, sputtering was also used to fabricate ITO films on glass. In-situ resistance measurement was used to characterize the initial growth of ITO thin films on glass. It was found that at a growth temperature of 150°C or above, ITO grows via a 2D layer by layer growth mechanism with a conductive critical thickness of about one lattice constant. With the growth temperature of less than 150°C, the films grow via a 3D growth mode. The growth mode transition also coincides with the amorphous to poly transition. In this thesis, a novel pulsed laser deposition technique called liquid target pulsed laser deposition was reported. It was used to fabricate GaN thin films from a gallium liquid. Liquid target pulsed laser deposition, to a certain extent, overcomes the target deterioration, target rotation, and splashing problems compared to traditional solid target pulsed laser deposition. Reasonably good crystal quality GaN thin films were fabricated on various substrates of quartz, silicon, and sapphire with a thin layer of ZnO buffer. Epitaxially grown GaN films were fabricated on ZnO buffered sapphire at an elevated substrate temperature. We studied the optical properties of epitaxially grown ZnO thin film on sapphire by photoluminescence measurement and variable angle spectroscopic ellipsometry. The bandgap, at room temperature and at 10K, and the refractive index of ZnO on sapphire were obtained. Phosphor thin film is an important topic in display application for color representation. In this thesis, we report the fabrication of red, green and blue primary color silicate phosphor thin films on silicon and silicon dioxide covered silicon substrates by pulsed laser deposition. By annealing at 800°C--1000°C, reasonably good purity red, green and blue photoluminescence were obtained

  17. Crystallisation and crystal forms of carbohydrate derivatives

    Science.gov (United States)

    Lennon, Lorna

    This thesis is focused on the synthesis and solid state analysis of carbohydrate derivatives, including many novel compounds. Although the synthetic chemistry surrounding carbohydrates is well established in the literature, the crystal chemistry of carbohydrates is less well studied. Therefore this research aims to improve understanding of the solid state properties of carbohydrate derivatives through gaining more information on their supramolecular bonding. Chapter One focuses on an introduction to the solid state of organic compounds, with a background to crystallisation, including issues that can arise during crystal growth. Chapter Two is based on glucopyranuronate derivatives which are understudied in terms of their solid state forms. This chapter reports on the formation of novel glucuronamides and utilising the functionality of the amide bond for crystallisation. TEMPO oxidation was completed to form glucopyranuronates by oxidation of the primary alcohol groups of glucosides to the carboxylic acid derivatives, to increase functionality for enhanced crystal growth. Chapter Three reports on the synthesis of glucopyranoside derivatives by O-glycosylation reactions and displays crystal structures, including a number of previously unsolved acetate protected and deprotected crystal structures. More complex glycoside derivatives were also researched in an aim to study the resultant supramolecular motifs. Chapter Four contains the synthesis of aryl cellobioside derivatives including the novel crystal structures that were solved for the acetate protected and deprotected compounds. Research was carried out to determine if 1-deoxycellodextrins could act as putative isostructures for cellulose. Our research displays the presence of isostructural references with 1-deoxycellotriose shown to be similar to cellulose III11, 1-deoxycellotetraose correlates with cellulose IV11 and 1-deoxycellopentose shows isostructurality similar to that of cellulose II. Chapter Five contains

  18. A Displayer of Stellar Hydrodynamics Processes

    Science.gov (United States)

    Vigo, José Antonio Escartín; Senz, Domingo García

    The graphics display tool that we present here was originally developed to meet the needs of the Astronomy and Astrophysics group at the UPC (GAA). At present, it is used to display the plots obtained from hydrodynamic simulations using the SPH (smoothed particle hydrodynamics) method. It is, however, a generic program that can be used for other multidimensional hydrodynamic methods. The application combines the most widely used features of other programs (most of them commercial) such as GnuPlot, Surfer, Grapher, IDL, Voxler, etc.

  19. Interpretation and display of research results

    Directory of Open Access Journals (Sweden)

    Dilip Kumar Kulkarni

    2016-01-01

    Full Text Available It important to properly collect, code, clean and edit the data before interpreting and displaying the research results. Computers play a major role in different phases of research starting from conceptual, design and planning, data collection, data analysis and research publication phases. The main objective of data display is to summarize the characteristics of a data and to make the data more comprehensible and meaningful. Usually data is presented depending upon the type of data in different tables and graphs. This will enable not only to understand the data behaviour, but also useful in choosing the different statistical tests to be applied.

  20. Variable parallax barrier spacing in autostereoscopic displays

    Science.gov (United States)

    Yoon, Seon Kyu; Khym, Sungwon; Kim, Hyun-Woo; Kim, Sung-Kyu

    2016-07-01

    In general, multi-view autostereoscopic displays can only provide autostereoscopic images with little crosstalk at the optimum viewing distance (OVD) in the depth direction, limiting the mobility of viewers. Therefore, this paper proposes a method of increasing viewer mobility in the depth direction by varying the distance separating the parallax barrier and the display. Computer simulations and experiments were conducted to verify changes in the OVD resulting from the application of the proposed method. The results showed that the proposed method is effective at changing the OVD with respect to changes in the viewing distance. Therefore this method minimizes changes in the 3D image quality due to the viewer's depth location.

  1. Perceptual transparency in neon color spreading displays.

    Science.gov (United States)

    Ekroll, Vebjørn; Faul, Franz

    2002-08-01

    In neon color spreading displays, both a color illusion and perceptual transparency can be seen. In this study, we investigated the color conditions for the perception of transparency in such displays. It was found that the data are very well accounted for by a generalization of Metelli's (1970) episcotister model of balanced perceptual transparency to tristimulus values. This additive model correctly predicted which combinations of colors would lead to optimal impressions of transparency. Color combinations deviating slightly from the additive model also looked transparent, but less convincingly so.

  2. Bright color reflective displays with interlayer reflectors

    Science.gov (United States)

    Kitson, Stephen; Geisow, Adrian; Rudin, John; Taphouse, Tim

    2011-08-01

    A good solution to the reflective display of color has been a major challenge for the display industry, with very limited color gamuts demonstrated to date. Conventional side-by-side red, green and blue color filters waste two-thirds of incident light. The alternative of stacking cyan, magenta and yellow layers is also challenging -- a 10% loss per layer compounds to nearly 50% overall. Here we demonstrate an architecture that interleaves absorbing-to-clear shutters with matched wavelength selective reflectors. This increases color gamut by reducing losses and more cleanly separating the color channels, and gives much wider choice of electro-optic colorants.

  3. Displaying of Details in Subvoxel Accuracy

    Institute of Scientific and Technical Information of China (English)

    蔡文立; 陈天洲; 等

    1996-01-01

    Under the volume segmentation in voxel space,a lot of details,some fine and thin objects,are ignored.In order to accurately display these details,this paper has developed a methodology for volume segmentation in subvoxel space.In the subvoxel space,most of the “bridges”between adjacent layers are broken down.Based on the subvoxel space,an automatic segmentation algorithm reserving details is discussed.After segmentation,volume data in subvoxel space are reduced to original voxel space.Thus,the details with width of only one or several voxels are extracted and displayed.

  4. Single DMD time-multiplexed 64-views autostereoscopic 3D display

    Science.gov (United States)

    Loreti, Luigi

    2013-03-01

    Based on previous prototype of the Real time 3D holographic display developed last year, we developed a new concept of auto-stereoscopic multiview display (64 views), wide angle (90°) 3D full color display. The display is based on a RGB laser light source illuminating a DMD (Discovery 4100 0,7") at 24.000 fps, an image deflection system made with an AOD (Acoustic Optic Deflector) driven by a piezo-electric transducer generating a variable standing acoustic wave on the crystal that acts as a phase grating. The DMD projects in fast sequence 64 point of view of the image on the crystal cube. Depending on the frequency of the standing wave, the input picture sent by the DMD is deflected in different angle of view. An holographic screen at a proper distance diffuse the rays in vertical direction (60°) and horizontally select (1°) only the rays directed to the observer. A telescope optical system will enlarge the image to the right dimension. A VHDL firmware to render in real-time (16 ms) 64 views (16 bit 4:2:2) of a CAD model (obj, dxf or 3Ds) and depth-map encoded video images was developed into the resident Virtex5 FPGA of the Discovery 4100 SDK, thus eliminating the needs of image transfer and high speed links

  5. Superhigh-resolution 200ppi series TFT-LCDs; Chokoseisai 200ppi ekisho display series

    Energy Technology Data Exchange (ETDEWEB)

    Kawamata, K.; Hirai, H. [Toshiba Corp., Tokyo (Japan)

    2000-02-01

    We have developed a 202 pixels per inch (ppi) thin-film transistor liquid crystal display (TFT-LCD) using low-temperature polycrystalline silicon (LTPS) technology. The superhigh resolution of 202 ppi offers the same image quality as printed matter such as magazines. The 200 ppi series TFT-LCDs are expected to support further developments in such areas as electronic books (e-books) and personal digital-picture viewers. Our lineup of 200 ppi TFT-LCDs includes a 4-inch display with VGA resolution, which is suitable for palmtop-size applications, and a 6.3-inch display with XGA resolution, which is suitable for typical photograph or paperback book-size applications. Larger size LCDs with 200 ppi resolution will be developed. (author)

  6. High-quality autostereoscopic display with spatial and sequential hybrid control.

    Science.gov (United States)

    Wang, Jiahui; Liang, Haowen; Fan, Hang; Zhou, Yangui; Krebs, Peter; Su, Jianbang; Deng, Yutao; Zhou, Jianying

    2013-12-10

    A novel design of an autostereoscopic display system with full resolution, low crosstalk, and weak Moiré pattern is presented. The system involves the usage of an LED backlight array and a liquid crystal display (LCD) panel, in conjunction with a Fresnel lens array, to form a 3D optical image system. The finer temporal synchronization is made possible with a dynamic synchronized backlight, so that the scanning of the LCD is in phase with the backlight array. The systematic optimization presents a full HD, or even an ultra HD, display for a single left or right channel. The achieved minimum systematic crosstalk is 2.64%, a sufficiently low value reported so far with an autostereoscopic system.

  7. Driving technology for improving motion quality of active-matrix organic light-emitting diode display

    Science.gov (United States)

    Kim, Jongbin; Kim, Minkoo; Kim, Jong-Man; Kim, Seung-Ryeol; Lee, Seung-Woo

    2014-09-01

    This paper reports transient response characteristics of active-matrix organic light emitting diode (AMOLED) displays for mobile applications. This work reports that the rising responses look like saw-tooth waveform and are not always faster than those of liquid crystal displays. Thus, a driving technology is proposed to improve the rising transient responses of AMOLED based on the overdrive (OD) technology. We modified the OD technology by combining it with a dithering method because the conventional OD method cannot successfully enhance all the rising responses. Our method can improve all the transitions of AMOLED without modifying the conventional gamma architecture of drivers. A new artifact is found when OD is applied to certain transitions. We propose an optimum OD selection method to mitigate the artifact. The implementation results show the proposed technology can successfully improve motion quality of scrolling texts as well as moving pictures in AMOLED displays.

  8. Crystal structure and prediction.

    Science.gov (United States)

    Thakur, Tejender S; Dubey, Ritesh; Desiraju, Gautam R

    2015-04-01

    The notion of structure is central to the subject of chemistry. This review traces the development of the idea of crystal structure since the time when a crystal structure could be determined from a three-dimensional diffraction pattern and assesses the feasibility of computationally predicting an unknown crystal structure of a given molecule. Crystal structure prediction is of considerable fundamental and applied importance, and its successful execution is by no means a solved problem. The ease of crystal structure determination today has resulted in the availability of large numbers of crystal structures of higher-energy polymorphs and pseudopolymorphs. These structural libraries lead to the concept of a crystal structure landscape. A crystal structure of a compound may accordingly be taken as a data point in such a landscape.

  9. Growth of dopamine crystals

    Energy Technology Data Exchange (ETDEWEB)

    Patil, Vidya, E-mail: vidya.patil@ruparel.edu; Patki, Mugdha, E-mail: mugdha.patki@ruparel.edu [D. G. Ruparel College, Senapati Bapat Marg, Mahim, Mumbai – 400 016 (India)

    2016-05-06

    Many nonlinear optical (NLO) crystals have been identified as potential candidates in optical and electro-optical devices. Use of NLO organic crystals is expected in photonic applications. Hence organic nonlinear optical materials have been intensely investigated due to their potentially high nonlinearities, and rapid response in electro-optic effect compared to inorganic NLO materials. There are many methods to grow organic crystals such as vapor growth method, melt growth method and solution growth method. Out of these methods, solution growth method is useful in providing constraint free crystal. Single crystals of Dopamine have been grown by evaporating the solvents from aqueous solution. Crystals obtained were of the size of orders of mm. The crystal structure of dopamine was determined using XRD technique. Images of crystals were obtained using FEG SEM Quanta Series under high vacuum and low KV.

  10. Growth of dopamine crystals

    Science.gov (United States)

    Patil, Vidya; Patki, Mugdha

    2016-05-01

    Many nonlinear optical (NLO) crystals have been identified as potential candidates in optical and electro-optical devices. Use of NLO organic crystals is expected in photonic applications. Hence organic nonlinear optical materials have been intensely investigated due to their potentially high nonlinearities, and rapid response in electro-optic effect compared to inorganic NLO materials. There are many methods to grow organic crystals such as vapor growth method, melt growth method and solution growth method. Out of these methods, solution growth method is useful in providing constraint free crystal. Single crystals of Dopamine have been grown by evaporating the solvents from aqueous solution. Crystals obtained were of the size of orders of mm. The crystal structure of dopamine was determined using XRD technique. Images of crystals were obtained using FEG SEM Quanta Series under high vacuum and low KV.

  11. A Novel Approach to Surgical Instructions for Scrub Nurses by Using See-Through-Type Head-Mounted Display.

    Science.gov (United States)

    Yoshida, Soichiro; Sasaki, Asami; Sato, Chikage; Yamazaki, Mutsuko; Takayasu, Junya; Tanaka, Naofumi; Okabayashi, Norie; Hirano, Hiromi; Saito, Kazutaka; Fujii, Yasuhisa; Kihara, Kazunori

    2015-08-01

    In order to facilitate assists in surgical procedure, it is important for scrub nurses to understand the operation procedure and to share the operation status with attending surgeons. The potential utility of head-mounted display as a new imaging monitor has been proposed in the medical field. This study prospectively evaluated the usefulness of see-through-type head-mounted display as a novel intraoperative instructional tool for scrub nurses. From January to March 2014, scrub nurses who attended gasless laparoendoscopic single-port radical nephrectomy and radical prostatectomy wore the monocular see-through-type head-mounted display (AiRScouter; Brother Industries Ltd, Nagoya, Japan) displaying the instruction of the operation procedure through a crystal panel in front of the eye. Following the operation, the participants completed an anonymous questionnaire, which evaluated the image quality of the head-mounted display, the helpfulness of the head-mounted display to understand the operation procedure, and adverse effects caused by the head-mounted display. Fifteen nurses were eligible for the analysis. The intraoperative use of the head-mounted display could help scrub nurses to understand the surgical procedure and to hand out the instruments for the operation with no major head-mounted-display wear-related adverse event. This novel approach to support scrub nurses will help facilitate technical and nontechnical skills during surgery.

  12. ALICE photon spectrometer crystals

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    Members of the mechanical assembly team insert the last few crystals into the first module of ALICE's photon spectrometer. These crystals are made from lead-tungstate, a crystal as clear as glass but with nearly four times the density. When a high-energy particle passes through one of these crystals it will scintillate, emitting a flash of light allowing the energy of photons, electrons and positrons to be measured.

  13. Crystallization from Gels

    Science.gov (United States)

    Narayana Kalkura, S.; Natarajan, Subramanian

    Among the various crystallization techniques, crystallization in gels has found wide applications in the fields of biomineralization and macromolecular crystallization in addition to crystallizing materials having nonlinear optical, ferroelectric, ferromagnetic, and other properties. Furthermore, by using this method it is possible to grow single crystals with very high perfection that are difficult to grow by other techniques. The gel method of crystallization provides an ideal technique to study crystal deposition diseases, which could lead to better understanding of their etiology. This chapter focuses on crystallization in gels of compounds that are responsible for crystal deposition diseases. The introduction is followed by a description of the various gels used, the mechanism of gelling, and the fascinating phenomenon of Liesegang ring formation, along with various gel growth techniques. The importance and scope of study on crystal deposition diseases and the need for crystal growth experiments using gel media are stressed. The various crystal deposition diseases, viz. (1) urolithiasis, (2) gout or arthritis, (3) cholelithiasis and atherosclerosis, and (4) pancreatitis and details regarding the constituents of the crystal deposits responsible for the pathological mineralization are discussed. Brief accounts of the theories of the formation of urinary stones and gallstones and the role of trace elements in urinary stone formation are also given. The crystallization in gels of (1) the urinary stone constituents, viz. calcium oxalate, calcium phosphates, uric acid, cystine, etc., (2) the constituents of the gallstones, viz. cholesterol, calcium carbonate, etc., (3) the major constituent of the pancreatic calculi, viz., calcium carbonate, and (4) cholic acid, a steroidal hormone are presented. The effect of various organic and inorganic ions, trace elements, and extracts from cereals, herbs, and fruits on the crystallization of major urinary stone and gallstone

  14. CRYSTAL FILTER TEST SET

    Science.gov (United States)

    CRYSTAL FILTERS, *HIGH FREQUENCY, *RADIOFREQUENCY FILTERS, AMPLIFIERS, ELECTRIC POTENTIAL, FREQUENCY, IMPEDANCE MATCHING , INSTRUMENTATION, RADIOFREQUENCY, RADIOFREQUENCY AMPLIFIERS, TEST EQUIPMENT, TEST METHODS

  15. Artistic Crystal Creations

    Science.gov (United States)

    Lange, Catherine

    2008-01-01

    In this inquiry-based, integrative art and science activity, Grade 5-8 students use multicolored Epsom salt (magnesium sulfate) crystallizing solutions to reveal beautiful, cylindrical, 3-dimensional, needle-shaped structures. Through observations of the crystal art, students analyze factors that contribute to crystal size and formation, compare…

  16. Protein Crystal Based Nanomaterials

    Science.gov (United States)

    Bell, Jeffrey A.; VanRoey, Patrick

    2001-01-01

    This is the final report on a NASA Grant. It concerns a description of work done, which includes: (1) Protein crystals cross-linked to form fibers; (2) Engineering of protein to favor crystallization; (3) Better knowledge-based potentials for protein-protein contacts; (4) Simulation of protein crystallization.

  17. Large-screen display industry: market and technology trends for direct view and projection displays

    Science.gov (United States)

    Castellano, Joseph A.; Mentley, David E.

    1996-03-01

    Large screen information displays are defined as dynamic electronic displays that can be viewed by more than one person and are at least 2-feet wide. These large area displays for public viewing provide convenience, entertainment, security, and efficiency to the viewers. There are numerous uses for large screen information displays including those in advertising, transportation, traffic control, conference room presentations, computer aided design, banking, and military command/control. A noticeable characteristic of the large screen display market is the interchangeability of display types. For any given application, the user can usually choose from at least three alternative technologies, and sometimes from many more. Some display types have features that make them suitable for specific applications due to temperature, brightness, power consumption, or other such characteristic. The overall worldwide unit consumption of large screen information displays of all types and for all applications (excluding consumer TV) will increase from 401,109 units in 1995 to 655,797 units in 2002. On a unit consumption basis, applications in business and education represent the largest share of unit consumption over this time period; in 1995, this application represented 69.7% of the total. The market (value of shipments) will grow from DOL3.1 billion in 1995 to DOL3.9 billion in 2002. The market will be dominated by front LCD projectors and LCD overhead projector plates.

  18. Analysis of liquid crystal properties for photonic crystal fiber devices

    DEFF Research Database (Denmark)

    Weirich, Johannes; Lægsgaard, Jesper; Wei, Lei

    2009-01-01

    We analyze the bandgap structure of Liquid Crystal infiltrated Photonic Crystal Fibers depending on the parameters of the Liquid Crystals by means of finite element simulations. For a biased Liquid Crystal Photonic Crystal Fiber, we show how the tunability of the bandgap position depends...... on the Liquid Crystal parameters....

  19. Head Mounted Displays for Virtual Reality

    Science.gov (United States)

    1993-02-01

    image generating capabilities. 2.2.4 Color Since people are used to viewing the world in color, a full-color display would add to the realism of the...Crescent Street, Waltham, MA, undated. Lipton, L., Foundations of the Stereoscopic Cinema , New York: Van Nostrand Rheinhold Company, 1982. Martin, S. W

  20. Exploring Community Building with an Awareness Display

    NARCIS (Netherlands)

    Vyas, Dhaval; Nijholt, Anton; Eliëns, Anton; Poelman, Wim; Makedon, Fillia

    2011-01-01

    In this paper, we present a field trial of a pervasive system called Panorama that is aimed at supporting social awareness in work environments. Panorama is an intelligent situated display in the staff room of an academic department. It artistically represents non-critical user generated content suc

  1. A Conceptual Framework for Ambient Learning Displays

    NARCIS (Netherlands)

    Börner, Dirk; Kalz, Marco; Specht, Marcus

    2010-01-01

    Börner, D., Kalz, M., & Specht, M. (2010). A Conceptual Framework for Ambient Learning Displays. In B. Chang, T. Hirashima, & H. Ogata (Eds.), Joint Proceedings of the Work-in-Progress Poster and Invited Young Researcher Symposium for the 18th International Conference on Computers in Education (pp.

  2. Perception of Depth with Stereoscopic Combat Displays.

    Science.gov (United States)

    1986-03-01

    phorias and aniseikonia contributed to visual fatigue in * observers of stereo displays though this proposition has never been put to test. In future...experiments, individuals with slight, but measurable, eye muscle imbalances or aniseikonia -should be compared with normals across various viewing sy

  3. Perception of Spatial Features with Stereoscopic Displays.

    Science.gov (United States)

    1980-10-24

    aniseikonia (differences in retinal image size in the two eyes) are of little significance because only monocular perception of the display is required for...perception as a result of such factors as aniseikonia , uncor- rected refractive errors, or phorias results in reduced stereopsis. However, because

  4. A Conceptual Framework for Ambient Learning Displays

    NARCIS (Netherlands)

    Börner, Dirk; Kalz, Marco; Specht, Marcus

    2011-01-01

    Börner, D., Kalz, M., & Specht, M. (2010, 29 November-3 December). A Conceptual Framework for Ambient Learning Displays. Poster presented at the Work-in-Progress Poster and Invited Young Researcher Symposium of the 18th International Conference on Computers in Education, Putrajaya, Malaysia: Asia-Pa

  5. A Conceptual Framework for Ambient Learning Displays

    NARCIS (Netherlands)

    Börner, Dirk; Kalz, Marco; Specht, Marcus

    2010-01-01

    Börner, D., Kalz, M., & Specht, M. (2010). A Conceptual Framework for Ambient Learning Displays. In B. Chang, T. Hirashima, & H. Ogata (Eds.), Joint Proceedings of the Work-in-Progress Poster and Invited Young Researcher Symposium for the 18th International Conference on Computers in Education (pp.

  6. Recommended Colours for Use on Airborne Displays.

    Science.gov (United States)

    1982-11-01

    generation of military aircraft will also utilise such devices. There are a number of types of colour CRTs but the penetron and shadow mask devices are...towards 610 nm also typifies penetron displays. When these boundaries are superimposed on repre- sentative source (Fig 21) and surface (Fig 22) plots it

  7. Presenting directions with a vibrotactile torso display

    NARCIS (Netherlands)

    Erp, J.B.F. van

    2005-01-01

    Vibrotactile displays covering the torso present spatial information in an intuitive way since the stimuli are directly mapped to the body coordinates; left is left, front is front, etc. The present study investigated the direction in the horizontal plane to which a specific torso location is mapped

  8. A Conceptual Framework for Ambient Learning Displays

    NARCIS (Netherlands)

    Börner, Dirk; Kalz, Marco; Specht, Marcus

    2011-01-01

    Börner, D., Kalz, M., & Specht, M. (2010, 29 November-3 December). A Conceptual Framework for Ambient Learning Displays. Poster presented at the Work-in-Progress Poster and Invited Young Researcher Symposium of the 18th International Conference on Computers in Education, Putrajaya, Malaysia:

  9. Ambient Displays and Game Design Patterns

    NARCIS (Netherlands)

    Kelle, Sebastian; Börner, Dirk; Kalz, Marco; Specht, Marcus

    2010-01-01

    Kelle, S., Börner, D., Kalz, M., & Specht, M. (2010). Ambient Displays and Game Design Patterns. In M. Wolpers, P. A. Kirschner, M. Scheffel, S. Lindstädt, & V. Dimitrova (Eds.), Sustaining TEL: From Innovation to Learning and Practice, Proceedings of EC-TEL 2010 (pp. 512-517). LNCS 6383. Berlin, He

  10. Slew Timer For Symbol Display Generator

    Science.gov (United States)

    Fisher, Paul A.

    1993-01-01

    Slew-length timer generates delay and, at end of delay, signal indicating end of one of slews of electron beam in cathode-ray-tube display driven by symbol generator. End-of-slew signal constitutes "permission" for symbol generator to begin drawing next symbol segment.

  11. Baculovirus display of functional antibody Fab fragments.

    Science.gov (United States)

    Takada, Shinya; Ogawa, Takafumi; Matsui, Kazusa; Suzuki, Tasuku; Katsuda, Tomohisa; Yamaji, Hideki

    2015-08-01

    The generation of a recombinant baculovirus that displays antibody Fab fragments on the surface was investigated. A recombinant baculovirus was engineered so that the heavy chain (Hc; Fd fragment) of a mouse Fab fragment was expressed as a fusion to the N-terminus of baculovirus gp64, while the light chain of the Fab fragment was simultaneously expressed as a secretory protein. Following infection of Sf9 insect cells with the recombinant baculovirus, the culture supernatant was analyzed by enzyme-linked immunosorbent assay using antigen-coated microplates and either an anti-mouse IgG or an anti-gp64 antibody. A relatively strong signal was obtained in each case, showing antigen-binding activity in the culture supernatant. In western blot analysis of the culture supernatant using the anti-gp64 antibody, specific protein bands were detected at an electrophoretic mobility that coincided with the molecular weight of the Hc-gp64 fusion protein as well as that of gp64. Flow cytometry using a fluorescein isothiocyanate-conjugated antibody specific to mouse IgG successfully detected the Fab fragments on the surface of the Sf9 cells. These results suggest that immunologically functional antibody Fab fragments can be displayed on the surface of baculovirus particles, and that a fluorescence-activated cell sorter with a fluorescence-labeled antigen can isolate baculoviruses displaying specific Fab fragments. This successful baculovirus display of antibody Fab fragments may offer a novel approach for the efficient selection of specific antibodies.

  12. Tactile display device using an electrorheological fluid

    Science.gov (United States)

    Garner, H. Douglas

    1994-08-01

    A tactile display device utilizes an electrorheological fluid to activate a plurality of tactile dots. A voltage is selectively produced uniformly across an electrorheological fluid flowing between a common ground electrode and a plurality of conductive dot electrodes, thereby producing an increase in the fluid's viscosity to the extent that fluid flow between the two electrodes is restricted. The flow restriction produces a build-up of electrorheological fluid in a corresponding dot actuator chamber. The resulting pressure increase in the chamber displaces an elastic diaphragm fixed to a display surface to form a lump which can be perceived by the reader as one dot in a Braille character cell. A flow regulation system provides a continually pressurized flow system and provides for free flow of the electrorheological fluid through the plurality of dot actuator chambers when they are not activated. The device is adaptable to printed circuit techniques and can simultaneously display tactile dots representative of a full page of Braille characters stored on a medium such as a tape cassette or to display tactile dots representative of non-Braille data appearing on a computer monitor or contained on another data storage medium. In an alternate embodiment, the elastic diaphragm drives a plurality of spring-loaded pins provided with positive stops to maintain consistent displacements of the pins in both their actuated and nonactuated positions.

  13. Visualising the Battlefield with Panoramic Displays

    Science.gov (United States)

    2000-11-01

    such colour capability, sufficient viewing angle, capabilities: who has the authority to interact colourcablity sufficintrvie igag with and change...conferencing, briefings, etc. can also be displayed (see Figure 2). * LSDs must conform to population stereotypes (i.e. user expectations about

  14. Converting a Display Screen into a Touchscreen

    Institute of Scientific and Technical Information of China (English)

    Qun Wang; Jun Cheng; San-Ming Shen; Yi-Jiang Shen; Jian-Xin Pang

    2014-01-01

    A method is presented to convert any display screen into a touchscreen by using a pair of cameras. Most state of art touchscreens make use of special touch-sensitive hardware or depend on infrared sensors in various configurations. We describe a novel computer-vision-based method that can robustly identify fingertips and detect touch with a precision of a few millimeters above the screen. In our system, the two cameras capture the display screen image simultaneously. Users can interact with a computer by the fingertip on the display screen. We have two important contributions:first, we develop a simple and robust hand detection method based on predicted images. Second, we determine whether a physical touch takes places by the homography of the two cameras. In this system, the appearance of the display screen in camera images is inherently predictable from the computer output images. Therefore, we can compute the predicted images and extract human hand precisely by simply subtracting the predicted images from captured images.

  15. Recognition of epoxy with phage displayed peptides.

    Science.gov (United States)

    Swaminathan, Swathi; Cui, Yue

    2013-07-01

    The development of a general approach for non-destructive chemical and biological functionalization of epoxy could expand opportunities for both fundamental studies and creating various device platforms. Epoxy shows unique electrical, mechanical, chemical and biological compatibility and has been widely used for fabricating a variety of devices. Phage display has emerged as a powerful method for selecting peptides that possess enhanced selectivity and binding affinity toward a variety of targets. In this letter, we demonstrate for the first time a powerful yet benign approach for identifying binding motifs to epoxy via comprehensively screened phage displayed peptides. Our results show that the epoxy can be selectively recognized with peptide-displaying phages. Further, along with the development of epoxy-based microstructures; recognition of the epoxy with phage displayed peptides can be specifically localized in these microstructures. We anticipate that these results could open up exciting opportunities in the use of peptide-recognized epoxy in fundamental biochemical recognition studies, as well as in applications ranging from analytical devices, hybrid materials, surface and interface, to cell biology. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Electronic Chart Display and Information System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper introduces the most advanced form of electronic chart display and information systems (ECDIS) which complies with the Performance Standards for ECDIS established by the International Maritime Organization (IMO) and the International Hydrographic Organization (IHO).It also describes the key features and the important functions of ECDIS.Then the future development of ECDIS in marine is discussed.

  17. Advanced manufacturing technologies on color plasma displays

    Science.gov (United States)

    Betsui, Keiichi

    2000-06-01

    The mass production of the color plasma display started from 1996. However, since the price of the panel is still expensive, PDPs are not in widespread use at home. It is necessary to develop the new and low-cost manufacturing technologies to reduce the price of the panel. This paper describes some of the features of new fabrication technologies of PDPs.

  18. Ambient Displays and Game Design Patterns

    NARCIS (Netherlands)

    Kelle, Sebastian; Börner, Dirk; Kalz, Marco; Specht, Marcus

    2010-01-01

    Kelle, S., Börner, D., Kalz, M., & Specht, M. (2010). Ambient Displays and Game Design Patterns. In M. Wolpers, P. A. Kirschner, M. Scheffel, S. Lindstädt, & V. Dimitrova (Eds.), Sustaining TEL: From Innovation to Learning and Practice, Proceedings of EC-TEL 2010 (pp. 512-517). LNCS 6383. Berlin,

  19. VLSI design of 3D display processing chip for binocular stereo displays

    Institute of Scientific and Technical Information of China (English)

    Ge Chenyang; Zheng Nanning

    2010-01-01

    In order to develop the core chip supporting binocular stereo displays for head mounted display(HMD)and glasses-TV,a very large scale integrated(VLSI)design scheme is proposed by using a pipeline architecture for 3D display processing chip(HMD100).Some key techniques including stereo display processing and high precision video scaling based bicubic interpolation,and their hardware implementations which improve the image quality are presented.The proposed HMD100 chip is verified by the field-programmable gate array(FPGA).As one of innovative and high integration SoC chips,HMD100 is designed by a digital and analog mixed circuit.It can support binocular stereo display,has better scaling effect and integration.Hence it is applicable in virtual reality(VR),3D games and other microdisplay domains.

  20. Writing next-generation display photomasks

    Science.gov (United States)

    Sandstrom, Tor; Wahlsten, Mikael; Park, Youngjin

    2016-10-01

    Recent years have seen a fast technical development within the display area. Displays get ever higher pixel density and the pixels get smaller. Current displays have over 800 PPI and market forces will eventually drive for densities of 2000 PPI or higher. The transistor backplanes also get more complex. OLED displays require 4-7 transistors per pixel instead of the typical 1-2 transistors used for LCDs, and they are significantly more sensitive to errors. New large-area maskwriters have been developed for masks used in high volume production of screens for state-of-theart smartphones. Redesigned laser optics with higher NA and lower aberrations improve resolution and CD uniformity and reduce mura effects. The number of beams has been increased to maintain the throughput despite the higher writing resolution. OLED displays are highly sensitive to placement errors and registration in the writers has been improved. To verify the registration of produced masks a separate metrology system has been developed. The metrology system is self-calibrated to high accuracy. The calibration is repeatable across machines and sites using Z-correction. The repeatability of the coordinate system makes it possible to standardize the coordinate system across an entire supply chain or indeed across the entire industry. In-house metrology is a commercial necessity for high-end mask shop, but also the users of the masks, the panel makers, would benefit from having in-house metrology. It would act as the reference for their mask suppliers, give better predictive and post mortem diagnostic power for the panel process, and the metrology could be used to characterize and improve the entire production loop from data to panel.