WorldWideScience

Sample records for crystal ball unanticipated

  1. Crystal Ball Functional Model

    Science.gov (United States)

    Plotnick, David

    2016-09-01

    The A2 collaboration of the MAinz MIkrotron is dedicated to studying meson production and nucleon structure and behavior via photon scattering. The photons are made via bremsstrahlung process and energy-tagged using the Glasgow Photon tagger. The photon beam then interacts in a variety of targets: cryogenic, polarized or solid state, and scattered particles deposit their energy within the NaI crystals. Scintillators are able to give results on particles energy and time. Events are reconstructed by combining information from the Tagging spectrometer, the Crystal Ball detector, the TAPS forward wall spectrometer, a Cherenkov detector, and multi-wire proportional chambers. To better understand the detector and experimental events, a live display was built to show energies deposited in crystals in real-time. In order to show a range of energies and particles, addressable LEDs that are individually programmable were used. To best replicate the Crystal Ball, 3D printing technology was employed to build a similar highly segmented icosahedron that can hold each LED, creating a 3D representation of what photons see during experiments. The LEDs were controlled via Arduino microcontroller. Finally, we implemented the Experimental Physics and Industrial Control System to grab live event data, and a simple program converts this data in to color and crystal number data that is able to communicate with the Arduino. Using these simple parts, we can better visualize and understand the tools used in nuclear physics. This material is based upon work supported by the National Science Foundation Grant No. IIA-1358175.

  2. Crystal Ball Replica

    Science.gov (United States)

    Ajamian, John

    2016-09-01

    The A2 collaboration of the Institute for Nuclear Physics of Johannes Gutenberg University performs research on (multiple) meson photoproduction and nucleon structure and dynamics using a high energy polarized photon beam at specific targets. Particles scattered from the target are detected in the Crystal Ball, or CB. The CB is composed of 672 NaI crystals that surround the target and can analyze particle type and energy of ejected particles. Our project was to create a replica of the CB that could display what was happening in real time on a 3 Dimensional scale replica. Our replica was constructed to help explain the physics to the general public, be used as a tool when calibrating each of the 672 NaI crystals, and to better analyze the electron showering of particles coming from the target. This poster will focus on the hardware steps necessary to construct the replica and wire the 672 programmable LEDS in such a way that they can be mapped to correspond to the Crystal Ball elements. George Washington NSF Grant.

  3. Coding Without Your Crystal Ball: Unanticipated Object-Oriented Reuse

    Science.gov (United States)

    2009-12-01

    Existing solutions either restrict the formof constructor definitions [Oder- sky 2007] or ignore some constructor calls [Ellis and Stroustrup 1990...G. Plotkin, C. Stirling , and M. Tofte (Eds.), Proof, Language, and Interaction: Essays in Honor of Robin Milner. MIT Press. 115 Hutchinson, N. C

  4. Crystal ball single event display

    Energy Technology Data Exchange (ETDEWEB)

    Grosnick, D.; Gibson, A. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy; Allgower, C. [Argonne National Lab., IL (United States). High Energy Physics Div.; Alyea, J. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy]|[Argonne National Lab., IL (United States). High Energy Physics Div.

    1997-10-15

    The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about {pi}{sup o}`s and {eta}`s formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer.

  5. Results on charmonium from the Crystal Ball

    CERN Document Server

    Partridge, R; Bloom, Elliott D; Bulos, F; Burnett, T; Cavalli-Sforza, M; Chestnut, R; Coyne, D; Gaiser, J; Godfrey, G; Hofstadter, R; Kiesling, C; Kirkbride, I; Kolanoski, H; Kollmann, W; Liberman, A; O'Reilly, J; Oreglia, M J; Peck, C; Porter, F; Richardson, M; Sadrozinski, H F W; Strauch, K; Tompkins, J; Wacker, K

    1979-01-01

    Results from the Crystal Ball experiment at SPEAR are presented. A preliminary analysis of the 3 photon final state from the J/ psi (3095) and of the cascade decays of the psi '(3684) yield new upper limits on the controversial states X(2820), chi (3455) and the even C- parity state at 3.59 GeV. From inclusive gamma -ray spectra of the J/ psi and psi ' preliminary branching ratios for psi ' to chi states and upper limits for J/ psi , psi ' to eta /sub c/, eta /sub c/' are given. (15 refs).

  6. Recent results from the Crystal Ball

    Energy Technology Data Exchange (ETDEWEB)

    Porter, F.C.

    1981-09-01

    During the past year, the Crystal Ball experiment has continued the investigation of e/sup +/e/sup -/ interactions at SPEAR. In the course of the year, we have slightly more than doubled the available datasets at the J/psi (to 2.2 x 10/sup 6/ produced J/psi) and the psi' (to 1.8 x 10/sup 6/ produced psi') resonances, and have increased the data in the 5.2 to 7.4 GeV center-of-mass (E/sub c.m./) region. The present discussion is limited to recent results obtained with the J/psi and psi' datasets, primarily dealing with transitions among the charmonium bound states.

  7. A simple alternative to the Crystal Ball function

    CERN Document Server

    Das, Souvik

    2016-01-01

    We present a simple alternative to the Crystal Ball function that has an exponential tail stitched to a Gaussian core. It has one parameter less than the Crystal Ball function and, where appropriate, offers more stable fits to peaks that continue into exponential tails. The function may also be extended with two exponential tails on each side of the Gaussian, and this has two parameters less than the corresponding double-shouldered Crystal Ball function. This function has been used to model background and signal processes in a recent Higgs pair production search and may be of versatile use in experimental physics and other fields.

  8. Synthesis of porous carbon balls from spherical colloidal crystal templates.

    Science.gov (United States)

    Kim, Youngchan; Cho, Chang-Yeol; Kang, Ji-Hwan; Cho, Young-Sang; Moon, Jun Hyuk

    2012-07-17

    Spherical inverse opal (IO) porous carbon was produced utilizing silica colloidal crystal spheres as templates. The spherical colloidal crystals were obtained through the self-assembly of monodisperse particles inside an emulsion droplet with confined geometry. The templates were inverted using a carbon precursor, phenol-formaldehyde (PF) resol. We demonstrated a two-step synthesis involving the subsequent infiltration of the PF resol precursor into the spherical colloidal crystal template and a one-step synthesis using a silica colloidal solution containing dissolved PF resol. In the former case, the sizes of the IO carbon balls were controlled by the size of the colloidal crystal templates, and diameters of a few micrometers up to 50 μm were obtained. The average diameter of the macropores created by the silica particles was 230 nm. Moreover, meso-/macroporous IO carbon balls were created using block-copolymer templates in the PF resol. In the one-step synthesis, the concentration of PF resol in the colloidal solution controlled the diameter of the IO carbon balls. IO balls smaller than 3 μm were obtained from the direct addition of 5% PF resol. The one-step synthesis produced rather irregular porous structures reflecting the less ordered crystallization processes inside the spherical colloidal crystals. Nitrogen adsorption and cyclic voltammetry measurements were conducted to measure the specific area and electroactive surface area of the IO carbon balls. The specific area of the mesopores-incorporated IO carbon balls was 1.3 times higher than that of bare IO carbon balls. Accordingly, the meso-/macroporous porous carbon balls exhibited higher electrocatalytic properties than the macroporous carbon balls.

  9. A new {eta} facility using the Crystal Ball

    Energy Technology Data Exchange (ETDEWEB)

    Tippens, W.B. [University of California, Los Angeles, Los Angeles, California 90024 (United States)

    1995-07-10

    The SLAC Crystal Ball detector is part of a proposed program at the AGS to measure rare and forbidden {eta} decays. It`s 4{pi} geometry also makes many interesting studies in baryon spectroscopy possible. A description of the detector`s capabilities at the AGS will be given. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}.

  10. A new ɛ facility using the Crystal Ball

    Science.gov (United States)

    Tippens, W. B.

    1995-07-01

    The SLAC Crystal Ball detector is part of a proposed program at the AGS to measure rare and forbidden η decays. It's 4π geometry also makes many interesting studies in baryon spectroscopy possible. A description of the detector's capabilities at the AGS will be given.

  11. Unexpected Expectations The Curiosities of a Mathematical Crystal Ball

    CERN Document Server

    Wapner, Leonard M

    2012-01-01

    Unexpected Expectations: The Curiosities of a Mathematical Crystal Ball explores how paradoxical challenges involving mathematical expectation often necessitate a reexamination of basic premises. The author takes you through mathematical paradoxes associated with seemingly straightforward applications of mathematical expectation and shows how these unexpected contradictions may push you to reconsider the legitimacy of the applications. The book requires only an understanding of basic algebraic operations and includes supplemental mathematical background in chapter appendices. After a history o

  12. Unanticipated Partial Behavioral Reflection

    OpenAIRE

    Roethlisberger, David; Denker, Marcus; Tanter, Éric

    2006-01-01

    International audience; Dynamic, unanticipated adaptation of running systems is of interest in a variety of situations, ranging from functional upgrades to on-the-fly debugging or monitoring of critical applications. In this paper we study a particular form of computational reflection, called unanticipated partial behavioral reflection, which is particularly well-suited for unanticipated adaptation of real-world systems. Our proposal combines the dynamicity of unanticipated reflection, i.e., ...

  13. Tests of C and CP using the Crystal Ball

    Science.gov (United States)

    Tippens, W. B.

    1995-07-01

    The installation of the SLAC Crystal Ball at BNL will initially provide measurements on several rare and forbidden neutral decays of the η. We intend to set first limits on several decay modes such as 2π0, 4π0, and 2π0γ. The first two are tests of CP invariance and the latter a test of C. In addition, we intend to improve the upper limit for the C violating decay to 3γ by roughly two orders of magnitude and make a precision measurement of the rare decay mode π0γγ.

  14. Social Media and Big Data – Cracks in the Crystal Ball?

    NARCIS (Netherlands)

    Westera, Wim

    2013-01-01

    Westera, W. (2013, 14 October). Social Media and Big Data – Cracks in the Crystal Ball? Invited e-paper at ESOMAR RW Connect. http://rwconnect.esomar.org/using-social-media-for-market-analysis-cracks-in-the-alleged-crystal-ball/

  15. Social Media and Big Data – Cracks in the Crystal Ball?

    NARCIS (Netherlands)

    Westera, Wim

    2013-01-01

    Westera, W. (2013, 14 October). Social Media and Big Data – Cracks in the Crystal Ball? Invited e-paper at ESOMAR RW Connect. http://rwconnect.esomar.org/using-social-media-for-market-analysis-cracks-in-the-alleged-crystal-ball/

  16. Hadron spectroscopy with the crystal ball at the AGS

    Science.gov (United States)

    Tippens, B.

    1998-05-01

    The recent installation of the Crystal Ball (CB) on the C6 beamline at the AGS marks the beginning of a new diverse program in hadron spectroscopy at BNL. Some of its goals are to improve the determination of the masses, widths and decay modes of several baryon resonances, to search for possible exotic states such as pentaquarks and hybrids, to determine the η-n scattering length, and to measure photoproduction of K- mesons from Λ and Σ hyperons using the technique of detailed balance. In the spring of 1997, we conducted a two week engineering run and a two week data run looking at all neutral final states from π-p interactions. A description of the experimental setup and performance of the detector is given along with some preliminary results from π-p→ηn.

  17. A look into the Medical and Veterinary Entomology crystal ball.

    Science.gov (United States)

    Dantas-Torres, F; Cameron, M M; Colwell, D D; Otranto, D

    2014-08-01

    Medical and Veterinary Entomology (MVE) represents a leading periodical in its field and covers many aspects of the biology and control of insects, ticks, mites and other arthropods of medical and veterinary importance. Since the first issue of the journal, researchers working in both developed and developing countries have published in MVE, with direct impact on current knowledge in the field. An increasing number of articles dealing with the epidemiology and transmission of vector-borne pathogens have been published in MVE, reflecting rapid changes in vector distribution, pathogen transmission and host-arthropod interactions. This article represents a gaze into the crystal ball in which we identify areas of increasing interest, discuss the main changes that have occurred in the epidemiology of parasitic arthropods since the first issue of MVE, and predict the principal scientific topics that might arise in the next 25 years for scientists working in medical and veterinary entomology.

  18. Crystal growth and the steady-state grain size during high-energy ball-milling

    DEFF Research Database (Denmark)

    Mørup, Steen; Jiang, Jianzhong; Bødker, Franz

    2001-01-01

    The change in crystal size during high-energy ball-milling of hematite and zinc sulphide powders with initial average crystal size of 8 nm and 4 nm, respectively, has been investigated by X-ray powder diffraction and transmission electron microscopy. It is found that the crystal size increases wi...

  19. Crystallization of acetaminophen form II by plastic-ball-assisted ultrasonic irradiation

    Science.gov (United States)

    Mori, Yoichiro; Maruyama, Mihoko; Takahashi, Yoshinori; Yoshikawa, Hiroshi Y.; Okada, Shino; Adachi, Hiroaki; Sugiyama, Shigeru; Takano, Kazufumi; Murakami, Satoshi; Matsumura, Hiroyoshi; Inoue, Tsuyoshi; Yoshimura, Masashi; Mori, Yusuke

    2017-02-01

    We report a novel method for crystallizing the metastable polymorph form II of acetaminophen by using a plastic ball during ultrasonic irradiation. The presence of a plastic ball during ultrasonic irradiation of aqueous acetaminophen solution effectively increased the probability and reduced the induction time of form II crystallization. This method facilitated both laboratory- and large-scale production of form II crystals. Our method has significant advantages for practical application of form II because it can reduce the time to production and enable large-scale production.

  20. Observation of glycine zipper and unanticipated occurrence of ambidextrous helices in the crystal structure of a chiral undecapeptide

    Directory of Open Access Journals (Sweden)

    Ramagopal Udupi A

    2007-08-01

    Full Text Available Abstract Background The de novo design of peptides and proteins has recently surfaced as an approach for investigating protein structure and function. This approach vitally tests our knowledge of protein folding and function, while also laying the groundwork for the fabrication of proteins with properties not precedented in nature. The success of these studies relies heavily on the ability to design relatively short peptides that can espouse stable secondary structures. To this end, substitution with α, β-dehydroamino acids, especially α, β-dehydrophenylalanine (ΔPhe comes in use for spawning well-defined structural motifs. Introduction of ΔPhe induces β-bends in small and 310-helices in longer peptide sequences. Results The present report is an investigation of the effect of incorporating two glycines in the middle of a ΔPhe containing undecapeptide. A de novo designed undecapeptide, Ac-Gly1-Ala2-ΔPhe3-Leu4-Gly5-ΔPhe6-Leu7-Gly8-ΔPhe9-Ala10-Gly11-NH2, was synthesized and characterized using X-ray diffraction and Circular Dichroism spectroscopic methods. Crystallographic studies suggest that, despite the presence of L-amino acid (L-Ala and L-Leu residues in the middle of the sequence, the peptide adopts a 310-helical conformation of ambidextrous screw sense, one of them a left-handed (A and the other a right-handed (B 310-helix with A and B being antiparallel to each other. However, CD studies reveal that the undecapeptide exclusively adopts a right-handed 310-helical conformation. In the crystal packing, three different interhelical interfaces, Leu-Leu, Gly-Gly and ΔPhe-ΔPhe are observed between the helices A and B. A network of C-H...O hydrogen bonds are observed at ΔPhe-ΔPhe and Gly-Gly interhelical interfaces. An important feature observed is the occurrence of glycine zipper motif at Gly-Gly interface. At this interface, the geometric pattern of interhelical interactions seems to resemble those observed between helices in

  1. Measurement of neutron detection efficiencies in NaI using the Crystal Ball detector

    Energy Technology Data Exchange (ETDEWEB)

    Stanislaus, T.D.S.; Koetke, D.D. E-mail: donald.koetke@valpo.edu; Allgower, C.; Bekrenev, V.; Benslama, K.; Berger, E.; Briscoe, W.J.; Clajus, M.; Comfort, J.R.; Craig, K.; Gibson, A.; Grosnick, D.; Huber, G.M.; Isenhower, D.; Kasprzyk, T.; Knecht, N.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Kycia, T.; Lolos, G.J.; Lopatin, I.; Manley, D.M.; Manweiler, R.; Marusic, A.; McDonald, S.; Nefkens, B.M.K.; Olmsted, J.; Papandreou, Z.; Peaslee, D.; Peterson, R.J.; Phaisangittisakul, N.; Pulver, M.; Ramirez, A.F.; Sadler, M.; Shafi, A.; Slaus, I.; Spinka, H.; Starostin, A.; Staudenmaier, H.M.; Supek, I.; Thoms, J.; Tippens, W.B

    2001-04-21

    We report on a measurement of the neutron detection efficiency in NaI crystals in the Crystal Ball (CB) detector obtained from a study of {pi}{sup -}p{yields}{pi} degree sign n reactions at the Brookhaven National Laboratory AGS. A companion GEANT-based Monte Carlo study has been done to simulate these reactions in the CB, and a comparison with the data is provided.

  2. A new measurement of the neutron detection efficiency for the NaI Crystal Ball detector

    CERN Document Server

    Martemianov, M; Demissie, B T; Marinides, Z; Akondi, C S; Annand, J R M; Arends, H J; Beck, R; Borisov, N; Braghieri, A; Briscoe, W J; Cherepnya, S; Collicott, C; Costanza, S; Downie, E J; Dieterle, M; Bondy, M I Ferretti; Filkov, L V; Garni, S; Glazier, D I; Glowa, D; Gradl, W; Gurevich, G; Hornidge, D; Huber, G M; Kaeser, A; Kashevarov, V L; Keshelashvili, I; Kondratiev, R; Korolija, M; Krusche, B; Lazarev, A; Linturi, J M; Lisin, V; Livingston, K; MacGregor, I J D; Manley, D M; Martel, P P; Middleton, D G; Miskimen, R; Mushkarenkov, A; Neganov, A; Neiser, A; Oberle, M; Ostrick, M; Ott, P; Otte, P B; Oussena, B; Pedroni, P; Polonski, A; Prakhov, S; Ron, G; Rostomyan, T; Sarty, A; Schott, D M; Schumann, S; Sokhoyan, V; Steffen, O; Strakovsky, I I; Strub, Th; Supek, I; Thiel, M; Thomas, A; Unverzagt, M; Usov, Yu A; Wagner, S; Watts, D P; Wettig, J; Werthmuller, D; Witthauer, L; Wolfes, M

    2015-01-01

    We report on a measurement of the neutron detection efficiency in NaI crystals in the Crystal Ball detector obtained from a study of single p0 photoproduction on deuterium using the tagged photon beam at the Mainz Microtron. The results were obtained up to a neutron energy of 400 MeV. They are compared to previous measurements made more than 15 years ago at the pion beam at the BNL AGS.

  3. Measurement of neutron detection efficiencies in NaI using the Crystal Ball detector

    Science.gov (United States)

    Stanislaus, T. D. S.; Koetke, D. D.; Allgower, C.; Bekrenev, V.; Benslama, K.; Berger, E.; Briscoe, W. J.; Clajus, M.; Comfort, J. R.; Craig, K.; Gibson, A.; Grosnick, D.; Huber, G. M.; Isenhower, D.; Kasprzyk, T.; Knecht, N.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Kycia, T.; Lolos, G. J.; Lopatin, I.; Manley, D. M.; Manweiler, R.; Marusic, A.; McDonald, S.; Nefkens, B. M. K.; Olmsted, J.; Papandreou, Z.; Peaslee, D.; Peterson, R. J.; Phaisangittisakul, N.; Pulver, M.; Ramirez, A. F.; Sadler, M.; Shafi, A.; Slaus, I.; Spinka, H.; Starostin, A.; Staudenmaier, H. M.; Supek, I.; Thoms, J.; Tippens, W. B.

    2001-04-01

    We report on a measurement of the neutron detection efficiency in NaI crystals in the Crystal Ball (CB) detector obtained from a study of π-p→ π°n reactions at the Brookhaven National Laboratory AGS. A companion GEANT-based Monte Carlo study has been done to simulate these reactions in the CB, and a comparison with the data is provided.

  4. Efficiency of various lattices from hard ball to soft ball: theoretical study of thermodynamic properties of dendrimer liquid crystal from atomistic simulation.

    Science.gov (United States)

    Li, Youyong; Lin, Shiang-Tai; Goddard, William A

    2004-02-18

    Self-assembled supramolecular organic liquid crystal structures at nanoscale have potential applications in molecular electronics, photonics, and porous nanomaterials. Most of these structures are formed by aggregation of soft spherical supramolecules, which have soft coronas and overlap each other in the packing process. Our main focus here is to study the possible packing mechanisms via molecular dynamics simulations at the atomistic level. We consider the relative stability of various lattices packed by the soft dendrimer balls, first synthesized and characterized by Percec et al. (J. Am. Chem. Soc. 1997, 119, 1539) with different packing methods. The dendrons, which form the soft dendrimer balls, have the character of a hard aromatic region from the point of the cone to the edge with C(12) alkane "hair". After the dendrons pack into a sphere, the core of the sphere has the hard aromatic groups, while the surface is covered with the C(12) alkane "hair". In our studies, we propose three ways to organize the hair on the balls, Smooth/Valentino balls, Sticky/Einstein balls, and Asymmetric/Punk balls, which lead to three different packing mechanisms, Slippery, Sticky, and Anisotropic, respectively. We carry out a series of molecular dynamics (MD) studies on three plausible crystal structures (A15, FCC, and BCC) as a function of density and analyze the MD based on the vibrational density of state (DoS) method to extract the enthalpy, entropy, and free energies of these systems. We find that anisotropic packed A15 is favored over FCC, BCC lattices. Our predicted X-ray intensities of the best structures are in excellent agreement with experiment. "Anisotropic ball packing" proposed here plays an intermediate role between the enthalpy-favored "disk packing" and entropy-favored "isotropic ball packing", which explains the phase transitions at different temperatures. Free energies of various lattices at different densities are essentially the same, indicating that the

  5. Synthesis of Cu(In,Ga)Se{sub 2} crystals using a crank ball mill

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Suzuka; Noji, Hideki; Akaki, Yoji [Miyakonojo National College of Technology, 473-1 Yoshio, Miyakonojo Miyazaki 885-8567 (Japan); Okamoto, Tomoichiro [Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan)

    2015-06-15

    Cu(In,Ga)Se{sub 2} (CIGS) crystals were synthesized by a mechanochemical (MC) process using a crank ball mill. The molar ratios of starting materials were Cu:In:Ga:Se=1:1-x:x:2 (0≤x≤1) and Cu:In:Ga:Se=1:0.7:0.3:y (2≤y≤3). The reaction time reduced with decreasing Se and Ga molar ratios. The collection rate decreased with longer reaction times. From XRD patterns, we confirmed that the CuInSe{sub 2} and/or CuGaSe{sub 2}crystals were successfully grown when the powders reacted. Although the crystals grown with a selenium molar ration of 2 were Se-poor, those grown at a molar ratio of 3 were Se-rich. When Se increasing molar ratio, Cu, In, and Ga were away from the stoichiometric. With a molar ratio of Cu:In:Ga:Se=1:0.7:0.3:2.5∝2.7, their composition became stoichiometric. Crystal morphology was varied. CIGS crystals were thus successfully synthesized using a crank ball mill. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. Crystal Ball: On the Future High Energy Colliders

    Energy Technology Data Exchange (ETDEWEB)

    Shiltsev, Vladimir [Fermilab

    2015-09-20

    High energy particle colliders have been in the forefront of particle physics for more than three decades. At present the near term US, European and international strategies of the particle physics community are centered on full exploitation of the physics potential of the Large Hadron Collider (LHC) through its high-luminosity upgrade (HL-LHC). A number of next generation collider facilities have been proposed and are currently under consideration for the medium- and far-future of the accelerator-based high energy physics. In this paper we offer a uniform approach to evaluation of various accelerators based on the feasibility of their energy reach, performance reach and cost range. We briefly review such post-LHC options as linear e+e- colliders in Japan (ILC) or at CERN (CLIC), muon collider, and circular lepton or hadron colliders in China (CepC/SppC) and Europe (FCC). We conclude with a look into ultimate energy reach accelerators based on plasmas and crystals, and some perspectives for the far future of accelerator-based particle physics.

  7. Crystal Ball: On the Future High Energy Colliders

    CERN Document Server

    Shiltsev, Vladimir

    2015-01-01

    High energy particle colliders have been in the forefront of particle physics for more than three decades. At present the near term US, European and international strategies of the particle physics community are centered on full exploitation of the physics potential of the Large Hadron Collider (LHC) through its high-luminosity upgrade (HL-LHC). A number of next generation collider facilities have been proposed and are currently under consideration for the medium- and far-future of the accelerator-based high energy physics. In this paper we offer a uniform approach to evaluation of various accelerators based on the feasibility of their energy reach, performance reach and cost range. We briefly review such post-LHC options as linear e+e- colliders in Japan (ILC) or at CERN (CLIC), muon collider, and circular lepton or hadron colliders in China (CepC/SppC) and Europe (FCC). We conclude with a look into ultimate energy reach accelerators based on plasmas and crystals, and some perspectives for the far future of ...

  8. Fabrication of flexible photonic crystal using alumina ball inserted Teflon tube

    Science.gov (United States)

    Watanabe, Yoshimi; Hotta, Takehiro; Sato, Hisashi

    2010-09-01

    In our previous paper, it was found that cotton yarn/TiO2-dispersed resin photonic crystals were fabricated successfully by applying textile technology. However, it is difficult to apply for practical use because these photonic crystals cannot change their shape flexibly. In this study, we fabricate the flexible photonic crystals using high-dielectric constant fibers. The high-dielectric constant fibers were made by inserting alumina balls into Teflon tubes. The crossed linear-fiber laminated fabric and multilayered woven fabric with an fcc lattice structure were structured by aligning high-dielectric constant fibers periodically. These photonic crystals consist of air and high-dielectric constant fibers. The attenuation of transmission amplitude through the photonic crystals was measured. The photonic crystal of crossed linear-fiber laminated fabric exhibits a forbidden gap in the range from 16 to 18 GHz range. On the other hand, the photonic crystal of multilayered woven fabric, which was fabricated by the same parameter with crossed linear-fiber laminated fabric, also exhibits a forbidden gap in the range from 13 to 16 GHz range. Thus, we can successfully fabricate flexible photonic crystals of woven fabric using high-dielectric constant fibers.

  9. Crystal Structure and Hydrogen Storage Behaviors of Mg/MoS2 Composites from Ball Milling

    Institute of Scientific and Technical Information of China (English)

    HAN Zongying; ZHOU Shixue; WANG Naifei; ZHANG Qianqian; ZHANG Tonghuan; RAN Weixian

    2016-01-01

    The Mg/MoS2 composites were prepared by ball milling under argon atmosphere, and the effect of MoS2 on the crystal structure and hydrogen storage properties of Mg was investigated. It is found that 10 wt% of MoS2 is sufifcient to prevent particle aggregation and cold welding during the milling process. The crystallite size of Mg will remain constant at slightly less than 38.8 nm with the milling process due to the size conifnement effect of MoS2. The dehydrogenation temperature of MgH2 is reduced to 390.4-429.4℃ due to the crystallite size reduction. Through iftting by Johnson-Mehl-Avrami model, it is found that Mg crystal grows by three dimension controlled by interface transformation during the process of MgH2 decomposition. MoS2 has a weak catalyst effect on the decomposition of MgH2 and activation energy of 148.9 kJ/mol is needed for the dehydrogenation process calculated by the Arrhenius equation.

  10. Bismuth-ceramic nanocomposites through ball milling and liquid crystal synthetic methods

    Science.gov (United States)

    Dellinger, Timothy Michael

    Three methods were developed for the synthesis of bismuth-ceramic nanocomposites, which are of interest due to possible use as thermoelectric materials. In the first synthetic method, high energy ball milling of bismuth metal with either MgO or SiO2 was found to produce nanostructured bismuth dispersed on a ceramic material. The morphology of the resulting bismuth depended on its wetting behavior with respect to the ceramic: the metal wet the MgO, but did not wet on the SiO2. Differential Scanning Calorimetry measurements on these composites revealed unusual thermal stability, with nanostructure retained after multiple cycles of heating and cooling through the metal's melting point. The second synthesis methodology was based on the use of lyotropic liquid crystals. These mixtures of water and amphiphilic molecules self-assemble to form periodic structures with nanometer-scale hydrophilic and hydrophobic domains. A novel shear mixing methodology was developed for bringing together reactants which were added to the liquid crystals as dissolved salts. The liquid crystals served to mediate synthesis by acting as nanoreactors to confine chemical reactions within the nanoscale domains of the mesophase, and resulted in the production of nanoparticles. By synthesizing lead sulfide (PbS) and bismuth (Bi) particles as proof-of-concept, it was shown that nanoparticle size could be controlled by controlling the dimensionality of the nanoreactors through control of the liquid crystalline phase. Particle size was shown to decrease upon going from three-dimensionally percolating nanoreactors, to two dimensional sheet-like nanoreactors, to one dimensional rod-like nanoreactors. Additionally, particle size could be controlled by varying the precursor salt concentration. Since the nanoparticles did not agglomerate in the liquid crystal immediately after synthesis, bismuth-ceramic nanocomposites could be prepared by synthesizing Bi nanoparticles and mixing in SiO2 particles which

  11. Flavor Symmetry Studies with New Hyperon Data from the Crystal Ball

    Science.gov (United States)

    Nefkens, B. M. K.; Berger, E.; McDonald, S.; Phaisangittisakul, N.; Prakhov, S.; Price, J. W.; Starostin, A.; Tippens, W. B.

    2001-08-01

    New hyperon data produced in the reactions K-p → neutrals have been measured using the Crystal Ball 4π multiphoton spectrometer. They provide striking evidence for the important role of flavor symmetry in QCD at low energy. We will show that the pronounced features seen in π-p → ηn near threshold are also exhibited in K-p → ηΛ. The unique features of the π-p →π0π0n Dalitz plot are replicated in the flavor-symmetric reaction K-p → π0π0Λ, while K-p → π0π0Σ0, which is not flavor-related, is much different. The measured mass, width, and spin/parity of the Λ* octet hyperons are found to be the flavor symmetric copy of the N* states. Flavor symmetry combined with the narrowness of Ξ* states implies that searching for the missing baryon states may be done more profitably in the Ξ* family rather than in the N* or Δ* family.

  12. Qualitative analysis of unanticipated difficult airway management

    DEFF Research Database (Denmark)

    Rosenstock, C; Hansen, E G; Kristensen, M S

    2006-01-01

    Unanticipated difficult airway management (DAM) is a major challenge for the anaesthesiologist and is associated with a risk of severe patient damage. We analysed 24 cases of unanticipated DAM for actual case management and anaesthesiologists knowledge, technical and non-technical skills...

  13. Qualitative analysis of unanticipated difficult airway management

    DEFF Research Database (Denmark)

    Rosenstock, C; Hansen, E G; Kristensen, M S;

    2006-01-01

    Unanticipated difficult airway management (DAM) is a major challenge for the anaesthesiologist and is associated with a risk of severe patient damage. We analysed 24 cases of unanticipated DAM for actual case management and anaesthesiologists knowledge, technical and non-technical skills. Anaesth...

  14. Measurement of the g p -> K^0 Sigma^+ reaction with the Crystal Ball/TAPS detectors at the Mainz Microtron

    CERN Document Server

    Aguar-Bartolomé, P; Arends, H J; Bantawa, K; Beck, R; Bekrenev, V; Berghäuser, H; Braghieri, A; Briscoe, W J; Brudvik, J; Cherepnya, S; Codling, R F B; Demissie, B; Dieterle, M; Downie, E J; Drexler, P; Fil'kov, L V; Glazier, D I; Gregor, R; Hamilton, D; Heid, E; Hornidge, D; Howdle, D; Isaksson, L; Jaegle, I; Jahn, O; Jude, T C; Kashevarov, V L; Keshelashvili, I; Kondratiev, R; Korolija, M; Kotulla, M; Koulbardis, A; Kruglov, S; Krusche, B; Lisin, V; Livingston, K; MacGregor, I J D; Maghrbi, Y; Mancel, J; Manley, D M; McNicoll, E F; Mekterovic, D; Metag, V; Mushkarenkov, A; Nefkens, B M K; Nikolaev, A; Novotny, R; Oberle, M; Ortega, H; Ostrick, M; Ott, P; Otte, P B; Oussena, B; Pedroni, P; Pheron, F; Polonski, A; Prakhov, S; Robinson, J; Rosner, G; Rostomyan, T; Schumann, S; Sikora, M H; Sober, D I; Starostin, A; Strakovsky, I I; Suarez, I M; Supek, I; Tarbert, C M; Thiel, M; Thomas, A; Unverzagt, M; Watts, D P; Werthmüller, D; Witthauer, L; Zehr, F

    2013-01-01

    The g p -> K^0 Sigma^+ reaction has been measured from threshold to Eg=1.45~GeV (W_cm=1.9~GeV) using the Crystal Ball and TAPS multiphoton spectrometers together with the photon tagging facility at the Mainz Microtron MAMI. In the present experiment, this reaction was searched for in the 3pi^0 p final state, assuming K^0_S -> pi^0 pi^0 and Sigma^+ -> pi^0 p. The experimental results include total and differential cross sections as well as the polarization of the recoil hyperon. The new data significantly improve the empirical knowledge about the g p -> K^0 Sigma^+ reaction in the measured energy range. The results are compared to previous measurements and model predictions. It was demonstrated that adding the present g p -> K^0 Sigma^+ results to existing data allowed a better description of this reaction with various models.

  15. Isospin Selectivity in Baryon and Hyperon Spectroscopy by Detecting Neutral Particle Final States with the Crystal Ball

    Science.gov (United States)

    Sadler, M. E.; Isenhower, L. D.; Spinka, H.; Comfort, J.; Clajus, M.; McDonald, S.; Moriwaki, T.; Nefkens, B. M. K.; Tippens, W. B.; Peterson, J.; Briscoe, W. J.; Papandreou, Z.; Efendiev, A.; Manley, D. M.; Abaev, V.; Bekrenev, V.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Starostin, A.; Batinic, M.; Marusic, A.; Slaus, I.; Supek, I.; Svarc, A.; Koetke, D.

    1996-05-01

    A comprehensive experimental program has recently been approved at the AGS at Brookhaven National Laboratory to measure absolute differential cross sections for π^- p and K^- p → neutrals in the momentum region 0.4 - 1.9 GeV/c. The SLAC Crystal Ball will be used as a multiphoton spectrometer to identify the various reaction channels by reconstructing the invariant mass of the γ rays produced from the decay of neutral mesons. The motivation for these measurements is to improve our understanding of the spectroscopy of baryons and hyperons. The isospin selectivity (e.g., for the reactions π^- p → η n and K^- p → π^o Λ) in populating certain resonances will be discussed.

  16. Unanticipated Partial Behavioral Reflection: Adapting Applications at Runtime

    OpenAIRE

    Roethlisberger, David; Denker, Marcus; Tanter, Éric

    2008-01-01

    International audience; Dynamic, unanticipated adaptation of running systems is of interest in a variety of situations, ranging from functional upgrades to on-the-fly debugging or monitoring of critical applications. In this paper we study a particular form of computational reflection, called unanticipated partial behavioral reflection, which is particularly well-suited for unanticipated adaptation of real-world systems. Our proposal combines the dynamicity of unanticipated reflection, i.e. r...

  17. Determination of the Dalitz plot parameter alpha for the decay eta->3pi^0 with the Crystal Ball at MAMI-B

    CERN Document Server

    Unverzagt, M; Ahrens, J; Annand, J R M; Arends, H J; Beck, R; Bekrenev, V; Boillat, B; Braghieri, A; Branford, D; Briscoe, W J; Brudvik, J W; Cherepnya, S; Codling, R; Downie, E J; Filkov, L V; Glazier, D I; Gregor, R; Heid, E; Hornidge, D; Jahn, O; Kashevarov, V L; Kondratiev, R; Korolija, M; Kotulla, M; Krambrich, D; Krusche, B; Lang, M; Lisin, V; Livingston, K; Lugert, S; MacGregor, I J D; Manley, D M; Martinez-Fabregate, M; McGeorge, J C; Mekterovic, D; Metag, V; Nefkens, B M K; Nikolaev, A; Novotny, R; Owens, R O; Pedroni, P; Polonski, A; Prakhov, S N; Price, J W; Rosner, G; Rost, M; Rostomyan, T; Schumann, S; Sober, D; Starostin, A; Supek, I; Tarbert, C M; Thomas, A; Walcher, Th; Watts, D P; Zehr, F

    2008-01-01

    A precise measurement of the Dalitz plot parameter, alpha, for the eta->3pi^0 decay is presented. The experiment was performed with the Crystal Ball and TAPS large acceptance photon detectors at the tagged photon beam facility of the MAMI-B electron accelerator in Mainz. High statistics of 1.8*10^6 eta->3pi^0 events were obtained, giving the result alpha = -0.032 \\pm 0.002_{stat} \\pm 0.002_{syst}.

  18. Aplicación de la simulación Monte Carlo en la administración de proyectos utilizando Excel y @Crystal Ball (ING

    Directory of Open Access Journals (Sweden)

    Carlos Azofeifa

    2016-03-01

    Full Text Available Simulation Monte Carlo is an effective technique used to analyze the critical path in a project, this simulation will be used to estimate the probability of finishing the project on time. Monte Carlo is necessary due to the hight uncertainty showed in the estimations of time operations from the differents activities in the project. For facility the calculations, @Crystal Ball software is a popular spreadsheet add-in used for simulations and risk analysis.

  19. New Tests of Chiral Perturbation Theory in η Decays Using the Crystal Ball

    Science.gov (United States)

    Nefkens, B. M. K.; Prakhov, S.; Berger, E.; Clajus, M.; Marušić, A.; McDonald, S.; Nefkens, B. M. K.; Phaisangittisakul, N.; Prakhov, S.; Pulver, M.; Starostin, A.; Tippens, W. B.; Isenhower, D.; Sadler, M.; Allgower, C.; Spinka, H.; Comfort, J.; Craig, K.; Ramirez, T.; Kycia, T.; Peterson, J.; Briscoe, W.; Shafi, A.; Staudenmaier, H. M.; Manley, D. M.; Olmsted, J.; Peaslee, D.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Huber, G. M.; Knecht, N.; Lolos, G. J.; Papandreou, Z.; Slaus, I.; Supek, I.; Grosnick, D.; Koetke, D.; Manweiler, R.; Stanislaus, S.

    2001-12-01

    The G-parity violating η → 3π0 decay occurs primarily as a consequence of the up-down quark mass difference, mu - md. In the standard notation 1 A(η → 3π0) (mu - md)(1 + αz) and Γ(η → 3π0) (mu - md)2(1 + 2αz), where α is the quadratic slope parameter, z = (ρ /ρ max } )2 \\ ∑ {(Ei{π o } - mη /3)2 } , ρ is the distance from the center of the Dalitz plot. Thus far χPTh has not succeeded in accounting fully for the experimental η → 3π decay rate. The expanded {O}(p4 ) calculation which includes pion-pion rescattering to all orders 2 is still too low by (34 ± 10)%. It has been suggested 3 that this might be due to dynamical effects with terms {O}(p6 ) such as {L}6 \\ Fπ 2 trmDμ UDμ U\\dag trDν UDν U\\dag . This possibility may be explored by a precise measurement of the quadratic slope parameter α in η → 3π0 decay. The existing data are inconclusive. GAMS-2000 4 obtained α = -(22±23) × 10-3. The Crystal Barrel 5 has reported α = -(52±15±10) × 10-3. The theoretical prediction 2 is α = -(14 to 7) × 10-3 ...

  20. Ball clay

    Science.gov (United States)

    Virta, Robert L.

    2010-01-01

    The article reports on the global market performance of ball clay in 2009 and presents an outlook for its 2010 performance. Several companies mined ball call in the country including Old Hickey Clay Co., Kentucky-Tennessee Clay Co., and H.C. Spinks Clay Co. Information on the decline in ball clay imports and exports is also presented.

  1. Determination of the Dalitz plot parameter {alpha} for the decay {eta}{yields}3{pi}{sup 0} with the Crystal Ball at MAMI-B

    Energy Technology Data Exchange (ETDEWEB)

    Unverzagt, M.; Beck, R.; Lang, M.; Nikolaev, A.; Schumann, S. [University Mainz, Institut fuer Kernphysik, Mainz (Germany); University Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik, Bonn (Germany); Aguar-Bartolome, P.; Ahrens, J.; Arends, H.J.; Heid, E.; Jahn, O.; Krambrich, D.; Martinez-Fabregate, M.; Rost, M.; Thomas, A.; Walcher, T. [University Mainz, Institut fuer Kernphysik, Mainz (Germany); Annand, J.R.M.; Codling, R.; Livingston, K.; MacGregor, I.J.D.; McGeorge, J.C.; Owens, R.O.; Rosner, G. [University of Glasgow, Department of Physics and Astronomy, Glasgow (United Kingdom); Bekrenev, V. [Petersburg Nuclear Physics Institute, Gatchina (Russian Federation); Boillat, B.; Krusche, B.; Zehr, F. [University Basel, Institut fuer Physik, Basel (Switzerland); Braghieri, A.; Pedroni, P.; Rostomyan, T. [INFN Sezione di Pavia, Pavia (Italy); Branford, D.; Glazier, D.I.; Tarbert, C.M.; Watts, D.P. [Univ. of Edinburgh, School of Physics, Edinburgh (United Kingdom); Briscoe, W.J. [The George Washington Univ., Center for Nuclear Studies, Washington, D.C. (United States); Brudvik, J.W.; Nefkens, B.M.K.; Prakhov, S.N.; Price, J.W.; Starostin, A. [Univ. of California at Los Angeles, Los Angeles, CA (United States); Cherepnya, S.; Fil' kov, L.V.; Kashevarov, V.L. [Lebedev Physical Inst., Moscow (Russian Federation); Downie, E.J. [Univ. Mainz, Inst. fuer Kernphysik, Mainz (Germany); Univ. of Glasgow, Dept. of Physics and Astronomy, Glasgow (United Kingdom); Gregor, R.; Kotulla, M.; Lugert, S.; Metag, V.; Novotny, R. [Univ. Giessen, II. Physikalisches Inst., Giessen (Germany); Hornidge, D. [Mount Allison Univ., Sackville, NB (Canada); Kondratiev, R.; Lisin, V.; Polonski, A. [Institute for Nuclear Research, Moscow (Russian Federation); Korolija, M.; Mekterovic, D.; Supek, I. [Rudjer Boskovic Inst., Zagreb (Croatia); Manley, D.M. [Kent State Univ., Kent, OH (United States); Sober, D. [The Catholic Univ. of America, Washington, D.C. (United States)

    2009-02-15

    A precise measurement of the Dalitz plot parameter, {alpha}, for the {eta}{yields}3{pi}{sup 0} decay is presented. The experiment was performed with the Crystal Ball and TAPS large-acceptance photon detectors at the tagged photon beam facility of the MAMI-B electron accelerator in Mainz. High statistics of 1.8.10{sup 6} {eta}{yields}3{pi}{sup 0} events were obtained, giving the result {alpha}=-0.032{+-}0.002{sub stat}{+-}0.002{sub syst}. (orig.)

  2. Ball clay

    Science.gov (United States)

    Virta, R.L.

    2011-01-01

    The article discusses the latest developments in the global ball clay mining industry, particularly in the U.S., as of June 2011. It cites several firms that are involved in ball clay mining in the U.S., including HC Spins Clay Co. Inc., the Imerys Group and Old Hickory Clay Co. Among the products made from ball clay are ceramic tiles, sanitaryware, as well as fillers, extenders and binders.

  3. Using Latex Balls and Acrylic Resin Plates to Investigate the Stacking Arrangement and Packing Efficiency of Metal Crystals

    Science.gov (United States)

    Ohashi, Atsushi

    2015-01-01

    A high-school third-year or undergraduate first-semester general chemistry laboratory experiment introducing simple-cubic, face-centered cubic, body-centered cubic, and hexagonal closest packing unit cells is presented. Latex balls and acrylic resin plates are employed to make each atomic arrangement. The volume of the vacant space in each cell is…

  4. Design smartness for tackling unanticipated loads

    Science.gov (United States)

    Badari Narayanan, V. T.; Natarajan, C.; Rajaraman, Arunachalam

    2003-10-01

    With present day scenario on enviornment and living, unanticipated loads from natural and man-made causes are on the rise, defying any rationality or scientific reasoning for anticipation. This aspect, coupled with the interest in creating slender and sleek structural systems, has assumed greater significance in designing structures with 'smartness' -- either in-built or externally activated or through evolution to a different configuration -- for tackling loads which do not get bracketed in conventional or limit state approaches. The definition of smartness under these circumstances can be termed as the ability to carry unanticipated loads over and above the designed one. Although the design methodology is confined within the boundaries of codal and functional requirements, a "buffer" needs to be built in the design so that an extra reserve is available over and above that prescribed by normal approach. This might seem misleading and here only the present day computing methods provide the turn-around by shifting the paradigm from "design-for-requirement" to "requirement-from-designs," an Object Oriented Approach. Thus the focus on present paper is on choosing from different designs to satisfy "buffer requirements" to bring in "smartness" in the design choice. Reinforced concrete section under bending is the emphasis to highlight this aspect, even though the concept is expandable. For a given span, and design/ultimate moment, sections are chosen to provide buffer and compared with conventional designs. Nonlinear behavior is modeled so that failure state is kept as the endpoint. From the studies it is observed that for a given span, moment -- either ultimate or design state -- and given strengths, number of "smart designs" with buffer indications can be generated to satisfy different criteria. This is illustrated with some examples for a typical span and given external moment, modeling either a bridge section or part of a frame member. It was also observed from the

  5. The First International Workshop on Unanticipated Software Evolution

    NARCIS (Netherlands)

    Kniesel, G.; Noppen, J.A.R.; Mens, T.; Buckley, J.

    2002-01-01

    This workshop was dedicated to research towards better support for unanticipated software evolution (USE) in development tools, programming languages, component models and related runtime infrastructures. The report gives an overview of the submitted papers and summarizes the essence of discussions

  6. Non-isothermal crystallization kinetics of polyethylene–clay nanocomposites prepared by high-energy ball milling

    Indian Academy of Sciences (India)

    Maryam Abareshi; Seyed Mojtaba Zebarjad; Elaheh K Goharshadi

    2014-08-01

    Non-isothermal crystallization kinetics of pure medium density polyethylene (MDPE) and MDPE–clay nanocomposites have been investigated by differential scanning calorimeter. The modified Avrami, Ozawa, Liu and Ziabicki equations have been applied to describe non-isothermal crystallization process. The results of Avrami analysis showed a very complicated crystallization mechanism. Although, Ozawa equation failed to provide an adequate description for non-isothermal crystallization process, Liu equation could describe it well. The data showed the crystallization rate of MDPE and nanocomposites raises with increasing cooling rate and the crystallization rate of nanocomposite is faster than that of MDPE at a given cooling rate. Ziabicki’s kinetic crystallizability index showed that clay can increase the ability of MDPE to crystallize, when it is cooled at unit cooling rate. The activation energy of samples has been evaluated by Kissinger method. The results showed that the activation energy of nanocomposite was lower than that of MDPE.

  7. Measurement of the Slope Parameter $\\alpha$ for the $\\eta\\to 3\\pi^0$ decay with the Crystal Ball at MAMI-C

    CERN Document Server

    Prakhov, S; Aguar, P; Akasoy, L K; Annand, J R M; Arends, H J; Bartolome, P A; Bantawa, K; Beck, R; Bekrenev, V; Berghauser, H; Boillat, B; Braghieri, A; Branford, D; Briscoe, W J; Brudvik, J; Cherepnya, S; Codling, R F B; Downie, E J; Drexler, P; Filkov, L V; Glazier, D I; Gregor, R; Heid, E; Hornidge, D; Jahn, O; Jude, T C; Kashevarov, V L; Kellie, J D; Kondratiev, R; Korolija, M; Kotulla, M; Koulbardis, A; Krambrich, D; Kruglov, S; Krusche, B; Lang, M; Lisin, V; Livingston, K; MacGregor, I J D; Maghrbi, Y; Manley, D M; Martínez, M; McGeorge, J C; McNicoll, E F; Mekterovic, D; Metag, V; Micanovic, S; Nikolaev, A; Novotny, R; Ostrick, M; Otte, P B; Pedroni, P; Pheron, F; Polonski, A; Robinson, J; Rosner, G; Rost, M; Rostomyan, T; Schumann, S; Sikora, M H; Sober, D I; Starostin, A; Suarez, I M; Supek, I; Tarbert, C M; Thiel, M; Thomas, A; Unverzagt, M; Watts, D P; Zamboni, I; Zehr, F

    2008-01-01

    The dynamics of the $\\eta\\to 3\\pi^0$ decay have been studied with the Crystal Ball multiphoton spectrometer and the TAPS calorimeter. Bremsstrahlung photons produced by the 1.5 GeV electron beam of the Mainz microtron MAMI-C and tagged by the Glasgow photon spectrometer were used for $\\eta$-meson production. The analysis of $3 \\times 10^6$ $\\gamma p \\to \\eta p \\to 3\\pi^0 p \\to 6\\gamma p$ events yields the value $\\alpha=-0.032\\pm0.003$ for the $\\eta\\to 3\\pi^0$ slope parameter, which agrees with the majority of recent experimental results and has the smallest uncertainty. The $\\pi^0\\pi^0$ invariant-mass spectrum was investigated for the occurrence of a cusp-like structure in the vicinity of the $\\pi^+\\pi^-$ threshold. The observed effect is small and does not affect our measured value for the slope parameter.

  8. A new measurement of the rare decay eta -> pi^0 gamma gamma with the Crystal Ball/TAPS detectors at the Mainz Microtron

    Energy Technology Data Exchange (ETDEWEB)

    Nefkens, B M; Prakhov, S; Aguar-Bartolom��, P; Annand, J R; Arends, H J; Bantawa, K; Beck, R; Bekrenev, V; Bergh��user, H; Braghieri, A; Briscoe, W J; Brudvik, J; Cherepnya, S; Codling, R F; Collicott, C; Costanza, S; Danilkin, I V; Denig, A; Demissie, B; Dieterle, M; Downie, E J; Drexler, P; Fil' kov, L V; Fix, A; Garni, S; Glazier, D I; Gregor, R; Hamilton, D; Heid, E; Hornidge, D; Howdle, D; Jahn, O; Jude, T C; Kashevarov, V L; K��ser, A; Keshelashvili, I; Kondratiev, R; Korolija, M; Kotulla, M; Koulbardis, A; Kruglov, S; Krusche, B; Lisin, V; Livingston, K; MacGregor, I J; Maghrbi, Y; Mancel, J; Manley, D M; McNicoll, E F; Mekterovic, D; Metag, V; Mushkarenkov, A; Nikolaev, A; Novotny, R; Oberle, M; Ortega, H; Ostrick, M; Ott, P; Otte, P B; Oussena, B; Pedroni, P; Polonski, A; Robinson, J; Rosner, G; Rostomyan, T; Schumann, S; Sikora, M H; Starostin, A; Strakovsky, I I; Strub, T; Suarez, I M; Supek, I; Tarbert, C M; Thiel, M; Thomas, A; Unverzagt, M; Watts, D P; Werthmueller, D; Witthauer, L

    2014-08-01

    A new measurement of the rare, doubly radiative decay eta->pi^0 gamma gamma was conducted with the Crystal Ball and TAPS multiphoton spectrometers together with the photon tagging facility at the Mainz Microtron MAMI. New data on the dependence of the partial decay width, Gamma(eta->pi^0 gamma gamma), on the two-photon invariant mass squared, m^2(gamma gamma), as well as a new, more precise value for the decay width, Gamma(eta->pi^0 gamma gamma) = (0.33+/-0.03_tot) eV, are based on analysis of 1.2 x 10^3 eta->pi^0 gamma gamma decays from a total of 6 x 10^7 eta mesons produced in the gamma p -> eta p reaction. The present results for dGamma(eta->pi^0 gamma gamma)/dm^2(gamma gamma) are in good agreement with previous measurements and recent theoretical calculations for this dependence.

  9. A new determination of the eta transition form factor in the Dalitz decay eta -> e^+ e^- gamma with the Crystal Ball/TAPS detectors at the Mainz Microtron

    CERN Document Server

    Aguar-Bartolomé, P; Arends, H J; Bantawa, K; Beck, R; Bekrenev, V; Berghäuser, H; Braghieri, A; Briscoe, W J; Brudvik, J; Cherepnya, S; Codling, R F B; Collicott, C; Denig, A; Downie, E J; Drexler, P; Fil'kov, L V; Fix, A; Glazier, D I; Gregor, R; Hamilton, D J; Heid, E; Hornidge, D; Isaksson, L; Jaegle, I; Jahn, O; Jude, T C; Kashevarov, V L; Keshelashvili, I; Kondratiev, R; Korolija, M; Kotulla, M; Koulbardis, A; Kruglov, S; Krusche, B; Lisin, V; Livingston, K; MacGregor, I J D; Maghrbi, Y; Manley, D M; McGeorge, J C; McNicoll, E F; Mekterovic, D; Metag, V; Mushkarenkov, A; Nefkens, B M K; Nikolaev, A; Novotny, R; Ortega, H; Ostrick, M; Ott, P; Otte, P B; Oussena, B; Pedroni, P; Pheron, F; Polonski, A; Prakhov, S; Robinson, J; Rosner, G; Rostomyan, T; Schumann, S; Sikora, M H; Sober, D I; Starostin, A; Strakovsky, I I; Suarez, I M; Supek, I; Tarbert, C M; Thiel, M; Thomas, A; Unverzagt, M; Watts, D P; Werthmüller, D; Zehr., F

    2013-01-01

    The Dalitz decay eta -> e^+ e^- gamma has been measured in the gamma p -> eta p reaction with the Crystal Ball and TAPS multiphoton spectrometers together with the photon tagging facility at the Mainz Microtron MAMI. The experimental statistic used in this work is one order of magnitude greater than in any previous measurement of eta -> e^+ e^- gamma. The value obtained for the slope parameter 1/Lambda^2 of the eta transition form factor, 1/Lambda^2 = (1.95 +/- 0.15_stat +/- 0.10_syst) [1/GeV^2], is in good agreement with recent measurements conducted in eta -> e^+ e^- gamma and eta -> mu^+ mu^- gamma decays as well as with recent form-factor calculations. The uncertainty obtained in the value of 1/Lambda^2 is lower compared to results from previous measurements of the eta -> e^+ e^- gamma decay.

  10. A new measurement of the rare decay eta -> pi^0 gamma gamma with the Crystal Ball/TAPS detectors at the Mainz Microtron

    CERN Document Server

    Nefkens, B M K; Aguar-Bartolomé, P; Annand, J R M; Arends, H J; Bantawa, K; Beck, R; Bekrenev, V; Berghäuser, H; Braghieri, A; Briscoe, W J; Brudvik, J; Cherepnya, S; Codling, R F B; Collicott, C; Costanza, S; Danilkin, I V; Denig, A; Demissie, B; Dieterle, M; Downie, E J; Drexler, P; Fil'kov, L V; Fix, A; Garni, S; Glazier, D I; Gregor, R; Hamilton, D; Heid, E; Hornidge, D; Howdle, D; Jahn, O; Jude, T C; Kashevarov, V L; Käser, A; Keshelashvili, I; Kondratiev, R; Korolija, M; Kotulla, M; Koulbardis, A; Kruglov, S; Krusche, B; Lisin, V; Livingston, K; MacGregor, I J D; Maghrbi, Y; Mancel, J; Manley, D M; McNicoll, E F; Mekterovic, D; Metag, V; Mushkarenkov, A; Nikolaev, A; Novotny, R; Oberle, M; Ortega, H; Ostrick, M; Ott, P; Otte, P B; Oussena, B; Pedroni, P; Polonski, A; Robinson, J; Rosner, G; Rostomyan, T; Schumann, S; Sikora, M H; Starostin, A; Strakovsky, I I; Strub, T; Suarez, I M; Supek, I; Tarbert, C M; Thiel, M; Thomas, A; Unverzagt, M; Watts, D P; Werthmüller, D; Witthauer., L

    2014-01-01

    A new measurement of the rare, doubly radiative decay eta->pi^0 gamma gamma was conducted with the Crystal Ball and TAPS multiphoton spectrometers together with the photon tagging facility at the Mainz Microtron MAMI. New data on the dependence of the partial decay width, Gamma(eta->pi^0 gamma gamma), on the two-photon invariant mass squared, m^2(gamma gamma), as well as a new, more precise value for the decay width, Gamma(eta->pi^0 gamma gamma) = (0.33+/-0.03_tot) eV, are based on analysis of 1.2 x 10^3 eta->pi^0 gamma gamma decays from a total of 6 x 10^7 eta mesons produced in the gamma p -> eta p reaction. The present results for dGamma(eta->pi^0 gamma gamma)/dm^2(gamma gamma) are in good agreement with previous measurements and recent theoretical calculations for this dependence.

  11. Construction of the Crystal Ball detector system and study of the helicity asymmetry in {gamma}p{yields}p{pi}{sup 0}{pi}{sup 0}; Aufbau des Crystal Ball-Detektorsystems und Untersuchung der Helizitaetsasymmetrie in {gamma} p {yields} p {pi}{sup 0} {pi}{sup 0}

    Energy Technology Data Exchange (ETDEWEB)

    Krambrich, D.

    2007-01-15

    Since spring 2004 the Crystal Ball Detector has been used for coincidence experiments probing the structure of the nucleons with real photons at the Mainzer Microtron. A major part of the commissioning, which was the first goal of this work, was the development and implementation of a new system for the Crystal Ball electronics. Components were designed or tested and, if necessary, modified to fit the experimental needs. After the commissioning, the set-up was then used successfully in several pion and eta production experiments for more than 2500 hours of beamtime. The second focus of this dissertation is the first measurement of the beam helicity asymmetry I{sup s}un in photoproduction of two neutral pions. The understanding of the excitation spectra of the nucleon requires experiments using polarised photons and/or polarised targets. Models based on different assumptions do reproduce the quantities measured without polarisation equally well but differ in the prediction of polarisation observables. The determination of more sensitive quantities is therefore mandatory. In contrast to single meson production, an observable appears in double pion production when using circularly polarized photons incident on an unpolarized target. This observable was determined as a function of energy and angle in the reactions {gamma} p {yields} p {pi}{sup 0} {pi}{sup 0} and in {gamma} p {yields} p {pi}{sup +} {pi}{sup -}. The results differ significantly from the model predictions. (orig.)

  12. Science of Ball Lightning (Fire Ball)

    Science.gov (United States)

    Ohtsuki, Yoshi-Hiko

    1989-08-01

    The Table of Contents for the full book PDF is as follows: * Organizing Committee * Preface * Ball Lightning -- The Continuing Challenge * Hungarian Ball Lightning Observations in 1987 * Nature of Ball Lightning in Japan * Phenomenological and Psychological Analysis of 150 Austrian Ball Lightning Reports * Physical Problems and Physical Properties of Ball Lightning * Statistical Analysis of the Ball Lightning Properties * A Fluid-Dynamical Model for Ball Lightning and Bead Lightning * The Lifetime of Hill's Vortex * Electrical and Radiative Properties of Ball Lightning * The Candle Flame as a Model of Ball Lightning * A Model for Ball Lightning * The High-Temperature Physico-Chemical Processes in the Lightning Storm Atmosphere (A Physico-Chemical Model of Ball Lightning) * New Approach to Ball Lightning * A Calculation of Electric Field of Ball Lightning * The Physical Explanation to the UFO over Xinjiang, Northern West China * Electric Reconnection, Critical Ionization Velocity, Ponderomotive Force, and Their Applications to Triggered and Ball Lightning * The PLASMAK™ Configuration and Ball Lightning * Experimental Research on Ball Lightning * Performance of High-Voltage Test Facility Designed for Investigation of Ball Lightning * List of Participants

  13. Cracks in the crystal ball : What happens to firms’ foreign exchange rate exposure when forecasters don’t agree about the future

    NARCIS (Netherlands)

    A. Muller (Aline); J. Poncelet (Julien); W.F.C. Verschoor (Willem); R.C.J. Zwinkels (Remco)

    2013-01-01

    textabstractThe central issue of this paper is whether stock prices are exposed to total exchange rate movements – as traditionally measured – or to revisions in expected future exchange rate movements and unanticipated currency shocks, and by how much of each. Based on a sample of 1675 U.S. firms

  14. Cracks in the crystal ball : What happens to firms’ foreign exchange rate exposure when forecasters don’t agree about the future

    NARCIS (Netherlands)

    A. Muller (Aline); J. Poncelet (Julien); W.F.C. Verschoor (Willem); R.C.J. Zwinkels (Remco)

    2013-01-01

    textabstractThe central issue of this paper is whether stock prices are exposed to total exchange rate movements – as traditionally measured – or to revisions in expected future exchange rate movements and unanticipated currency shocks, and by how much of each. Based on a sample of 1675 U.S. firms o

  15. Nanocrystalline Nd{sub 2}Fe{sub 17} synthesized by high-energy ball milling: crystal structure, microstructure and magnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, Pablo; Gorria, Pedro; Perez, Maria J; Sanchez Llamazares, Jose L; Blanco, Jesus A [Departamento de Fisica, Universidad de Oviedo, Calvo Sotelo, s/n, 33007 Oviedo (Spain); Franco, Victorino [Departamento Fisica de la Materia Condensada, ICMSE-CSIC, Universidad de Sevilla, PO Box 1065, 41080 Sevilla (Spain); Sanchez Marcos, Jorge [Instituto de Ciencia de Materiales de Madrid, CSIC, Cantoblanco, 28049 Madrid (Spain); Puente Orench, Ines, E-mail: alvarezpablo.uo@uniovi.e [Institute Laue-Langevin, BP 156, 6 rue Jules Horowitz, 38042 Grenoble Cedex 9 (France)

    2010-06-02

    Nanocrystalline Nd{sub 2}Fe{sub 17} powders have been obtained by means of high-energy ball milling from nearly single-phase bulk alloys produced by arc melting and high temperature homogenization annealing. The rhombohedral Th{sub 2}Zn{sub 17}-type crystal structure of the bulk alloy remains unaltered after the milling process, with almost unchanged values for the cell parameters. However, the severe mechanical processing induces drastic microstructural changes. A decrease of the mean crystalline size down to around 10 nm is observed, giving rise to a considerable augmentation of the disordered inter-grain boundaries. This modification of the microstructure affects the magnetic behaviour of the milled powders, although the magnetic structure remains collinear ferromagnetic. While a unique ferro-to-paramagnetic transition temperature, T{sub C} = 339 {+-} 2 K, is observed in the bulk alloy, the nanocrystalline samples exhibit a more likely distribution of T{sub C} values. The latter seems to be responsible for the significant broadening of the temperature range in which magneto-caloric effect is observed, and the lowering of the maximum value of the magnetic entropy change.

  16. Bouncing Balls that Spin

    Science.gov (United States)

    Knipp, Peter

    2008-01-01

    When a ball bounces elastically against a floor, the vertical component (v[subscript y]) of the velocity of the ball's mass-center changes sign. This is a special case of the elastic collision of two balls (i.e., two objects, neither of which is much more massive than the other), in which case the balls' post-collision relative velocity (=…

  17. Beyond the crystal ball assumption

    DEFF Research Database (Denmark)

    Vaucouleur, Sebastien

    2008-01-01

    trades control for flexibility. Unfortunately, it also makes the customized software product very sensitive to upgrades. We propose a more mitigated solution, that does not require accurate anticipation and yet offers some resilience to evolution of the base software product through the use of code...... quantification. We introduce the Eggther framework for customization of evolvable software products in general and ERP systems in particular. Our approach is based on the concept of code query by example. The technology being developed is based on an initial empirical study on practices around ERP systems. We...... motivate our design choices based on those empirical results, and we show how the proposed solution helps with respect to the upgrade problem....

  18. Analysis of the Crystal Ball data on $K^-p\\to\\pi^0\\Sigma^0$ reaction with center-of-mass energies of $1536\\sim 1676$ MeV

    CERN Document Server

    Shi, Jun

    2014-01-01

    With an effective Lagrangian approach, we analyze the $K^-p\\to \\pi^0\\Sigma^0$ reaction to study the $\\Lambda$ hyperon resonances by fitting the Crystal Ball data on differential cross sections and $\\Sigma^0$ polarization with the center-of-mass energies of $1536\\sim 1676$ MeV. Besides well established PDG 4-star $\\Lambda$ resonances around this energy range, the $\\Lambda(1600){1\\over 2}^+$ resonance, listed as a 3-star resonance in PDG, is found to be definitely needed. In addition, there is strong evidence for the existence of a new $\\Lambda({3\\over 2}^+)$ resonance around 1680 MeV.

  19. Determination of the Dalitz-plot parameter {alpha} for the decay {eta}{yields}3{pi}{sup 0} with the Crystal Ball at MAMI; Bestimmung des Dalitz-Plot-Parameters {alpha} fuer den Zerfall {eta} {yields} 3{pi}{sup 0} mit dem Crystal Ball am MAMI

    Energy Technology Data Exchange (ETDEWEB)

    Unverzagt, Marc

    2008-05-26

    In order to determine the Dalitz-plot parameter {alpha} experiments were evaluated, Which were performed with the Crystal Ball/TAPS facility at the accelerator MAMI of the Institute for Nuclear Physics at the Johannes Gutenberg University in Mainz in the years 2004 and 2005. {eta} mesons wer produced via the reaction {gamma}p{yields}{eta}p. From four different analyses the following four in this thesis determined Dalitz-plot parameters with the given statistics resulted: {eta} without proton: {alpha}=-0.0314{+-}0.0013{sub -0.0014}{sup +0.0017} (1.1.10{sup 6} events), {eta} with proton: {alpha}=-0.0338{+-}0.0020{sub -0.0022}{sup +0.0019} (4.2.10{sup 5} events), {delta}{sup +} magnetic dipole moment without proton: {alpha}=-0.0277{+-}0.0013{sub -0.0019}{sup +0.0014} (7.1.10{sup 5} events), {delta}{sup +} magnetic dipole moment with proton: {alpha}=-0.0272{+-}0.0019{sub -0.0043}{sup +0.0022} (3.1.10{sup 5} events).

  20. Having a Ball with Fitness Balls

    Science.gov (United States)

    McNulty, Betty

    2011-01-01

    Fitness programs can be greatly enhanced with the addition of fitness balls. They are a fun, challenging, economical, and safe way to incorporate a cardiovascular, strength, and stretching program for all fitness levels in a physical education setting. The use of these balls has become more popular during the last decade, and their benefits and…

  1. Gender differences in detecting unanticipated stimuli: an ERP study.

    Science.gov (United States)

    Jin, Yan; Yan, Ke; Zhang, Yuhe; Jiang, Yijie; Tao, Ran; Zheng, Xifu

    2013-03-22

    The aim of the present study was to investigate the gender differences during an emotional anticipation task. Sixteen females and sixteen males participated in the experiment. Event-related potentials (ERPs) were measured in a modified cue-target paradigm and were recorded following stimuli that differed in two dimensions: (1) predictable vs. unpredictable pictures and (2) negative vs. neutral pictures. Cue-induced ERP results demonstrated that females had enhanced positive component (P2) compared to males. Moreover, results showed that during the unpredictable condition, females displayed larger P2 amplitudes in negative and neutral anticipation than males. This study demonstrates that females have greater sensitivity to the unanticipated stimuli, which may contribute to evolution.

  2. Ball Screw Actuator Including a Compliant Ball Screw Stop

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Hanlon, Casey (Inventor)

    2017-01-01

    An actuator includes a ball nut, a ball screw, and a ball screw stop. The ball nut is adapted to receive an input torque and in response rotates and supplies a drive force. The ball screw extends through the ball nut and has a first end and a second end. The ball screw receives the drive force from the ball nut and in response selectively translates between a retract position and a extend position. The ball screw stop is mounted on the ball screw proximate the first end to translate therewith. The ball screw stop engages the ball nut when the ball screw is in the extend position, translates, with compliance, a predetermined distance toward the first end upon engaging the ball nut, and prevents further rotation of the ball screw upon translating the predetermined distance.

  3. Unanticipated Insights into Biomedicine from the Study of Acupuncture.

    Science.gov (United States)

    MacPherson, Hugh; Hammerschlag, Richard; Coeytaux, Remy R; Davis, Robert T; Harris, Richard E; Kong, Jiang-Ti; Langevin, Helene M; Lao, Lixing; Milley, Ryan J; Napadow, Vitaly; Schnyer, Rosa N; Stener-Victorin, Elisabet; Witt, Claudia M; Wayne, Peter M

    2016-02-01

    Research into acupuncture has had ripple effects beyond the field of acupuncture. This paper identifies five exemplars to illustrate that there is tangible evidence of the way insights gleaned from acupuncture research have informed biomedical research, practice, or policy. The first exemplar documents how early research into acupuncture analgesia has expanded into neuroimaging research, broadening physiologic understanding and treatment of chronic pain. The second describes how the acupuncture needle has become a tool to enhance biomedical knowledge of connective tissue. The third exemplar, which illustrates use of a modified acupuncture needle as a sham device, focuses on emergent understanding of placebo effects and, in turn, on insights into therapeutic encounters in treatments unrelated to acupuncture. The fourth exemplar documents that two medical devices now in widespread use were inspired by acupuncture: transcutaneous electrical nerve stimulators for pain control and antinausea wrist bands. The final exemplar describes how pragmatic clinical trial designs applied in acupuncture research have informed current general interest in comparative effectiveness research. In conclusion, these exemplars of unanticipated outcomes of acupuncture research comprise an additional rationale for continued support of basic and clinical research evaluating acupuncture and other under-researched therapies.

  4. Physics of ball sports

    Science.gov (United States)

    Cohen, C.; Clanet, C.

    2016-06-01

    Ball sports have been part of human history for thousands of years [1]. Nowadays, 13 of them are part of the Olympic games (badminton, basketball, beach volley, football/soccer, golf, handball, hockey, rugby, table tennis, tennis, volleyball, water polo, ice hockey). All these games differ by launcher (hand, club, racket, bat), ball (size, shape and mass), pitch size and number of players. These differences induce different ball velocities. Apart from the velocities and the way to maximize them, we discuss in this article the ball trajectories and their impact on the size of sports fields.

  5. 10 CFR 501.191 - Use of natural gas or petroleum for certain unanticipated equipment outages and emergencies...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Use of natural gas or petroleum for certain unanticipated... Natural Gas or Petroleum for Emergency and Unanticipated Equipment Outage Purposes § 501.191 Use of natural gas or petroleum for certain unanticipated equipment outages and emergencies defined in...

  6. Happy Balls, Unhappy Balls, and Newton's Cradle

    Science.gov (United States)

    Kagan, David

    2010-01-01

    The intricacies of Newton's Cradle are well covered in the literature going as far back as the time of Newton! These discussions generally center on the highly elastic collisions of metal spheres. Thanks to the invention of happy and unhappy balls, you can build and study the interaction of less elastic systems (see Fig. 1).

  7. Happy Balls, Unhappy Balls, and Newton's Cradle

    Science.gov (United States)

    Kagan, David

    2010-01-01

    The intricacies of Newton's Cradle are well covered in the literature going as far back as the time of Newton! These discussions generally center on the highly elastic collisions of metal spheres. Thanks to the invention of happy and unhappy balls, you can build and study the interaction of less elastic systems (see Fig. 1).

  8. Compact Q-balls

    CERN Document Server

    Bazeia, D; Marques, M A; Menezes, R; da Rocha, R

    2016-01-01

    In this work we deal with non-topological solutions of the Q-ball type in two space-time dimensions, in models described by a single complex scalar field that engenders global symmetry. The main novelty is the presence of stable Q-balls solutions that live in a compact interval of the real line and appear from a family of models controlled by two distinct parameters. We find analytical solutions and study their charge and energy, and show how to control the parameters to make the Q-balls classically and quantum mechanically stable.

  9. Theory of ball lightning

    CERN Document Server

    Wu, H -C

    2014-01-01

    We present a comprehensive explanation on ball lightning, a luminous sphere occasionally witnessed after ordinary lightning. In the last decade, it has been well established that natural lightning routinely generates relativistic electrons, which account for observed x rays. So we assume that, in a ball lightning event, a well-defined relativistic electron bunch is produced by the stepped leader of lightning. When this electron bunch strikes various media, a powerful microwave pulse is emitted by the coherent transition radiation mechanism. This intense microwave ionizes air, evacuates plasmas by its radiation pressure to form a globular plasma cavity, and then gets trapped inside the cavity. This theory successfully explains all characteristics of ball lightning, especially the appearance of ball lightning in fully-screened aircraft. Moreover, the proposed radiation mechanism fully explains the strongest radio signals from lightning and nanosecond spikes in the signals are direct evidences on the generation ...

  10. Aerodynamics of sports balls

    Science.gov (United States)

    Mehta, R. D.

    1985-01-01

    Research data on the aerodynamic behavior of baseballs and cricket and golf balls are summarized. Cricket balls and baseballs are roughly the same size and mass but have different stitch patterns. Both are thrown to follow paths that avoid a batter's swing, paths that can curve if aerodynamic forces on the balls' surfaces are asymmetric. Smoke tracer wind tunnel tests and pressure taps have revealed that the unbalanced side forces are induced by tripping the boundary layer on the seam side and producing turbulence. More particularly, the greater pressures are perpendicular to the seam plane and only appear when the balls travel at velocities high enough so that the roughness length matches the seam heigh. The side forces, once tripped, will increase with spin velocity up to a cut-off point. The enhanced lift coefficient is produced by the Magnus effect. The more complex stitching on a baseball permits greater variations in the flight path curve and, in the case of a knuckleball, the unsteady flow effects. For golf balls, the dimples trip the boundary layer and the high spin rate produces a lift coefficient maximum of 0.5, compared to a baseball's maximum of 0.3. Thus, a golf ball travels far enough for gravitational forces to become important.

  11. Tunguska Dark Matter Ball

    CERN Document Server

    Froggatt, C D

    2014-01-01

    It is suggested that the Tunguska event in June 1908 cm-large was due to a cm-large ball of a condensate of bound states of 6 top and 6 anti-top quarks containing highly compressed ordinary matter. Such balls are supposed to make up the dark matter as we earlier proposed. The expected rate of impact of this kind of dark matter ball with the earth seems to crudely match a time scale of 200 years between the impacts. The main explosion of the Tunguska event is explained in our picture as material coming out from deep within the earth, where it has been heated and compressed by the ball penetrating to a depth of several thousand km. Thus the effect has some similarity with volcanic activity as suggested by Kundt. We discuss the possible identification of kimberlite pipes with earlier Tunguska-like events. A discussion of how the dark matter balls may have formed in the early universe is also given.

  12. The bowling balls

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    10 November 1972: CERN’s Bent Stumpe places an order for 12 bowling balls for a total cost of 95 US dollars. Although not evident at first sight, he is buying the heart of some of the first tracking devices to be used in the SPS control room. Today, Bent Stumpe’s device would be called a desktop mouse…   The first order for 4 bowling balls later changed to 12 balls. The bowling balls became the heart of Bent Stumpe's mouse. Almost 40 years ago, the web, Wikipedia and Google did not exist and it was much more difficult to know whether other people in other parts of the world or even in the same laboratory were facing the same problems or developing the same tools. At that time, Bent Stumpe was an electronics engineer, newly recruited to work on developments for the SPS Central Control room. One of the things his supervisor asked him to build as soon as possible was a device to control a pointer on a screen, also called a tracker ball. The heart of the device was the...

  13. Interacting Q-balls

    CERN Document Server

    Brihaye, Yves

    2007-01-01

    We construct explicit examples of new axially symmetric, non-spinning Q-ball solutions that have not been studied so far. These solutions can be interpreted as angular excitations of the fundamental Q-balls and are related to the spherical harmonics. Correspondingly, they have higher energy and their energy densities possess two local maxima on the positive z-axis. We also study two Q-balls interacting via a potential term in 3+1 dimensions and construct examples of stationary, solitonic-like objects in (3+1)-dimensional flat space-time that consist of two interacting global scalar fields. We concentrate on configurations composed of one spinning and one non-spinning Q-ball and study the parameter-dependence of the energy and charges of the configuration. In addition, we present numerical evidence that for fixed values of the coupling constants two different types of 2-Q-ball solutions exist: solutions with defined parity, but also solutions which are asymmetric with respect to reflexion through the x-y-axis.

  14. Split Q-balls

    Science.gov (United States)

    Bazeia, D.; Losano, L.; Marques, M. A.; Menezes, R.

    2017-02-01

    We investigate the presence of non-topological solutions of the Q-ball type in (1 , 1) spacetime dimensions. The model engenders the global U (1) symmetry and is of the k-field type, since it contains a new term, of the fourth-order power in the derivative of the complex scalar field. It supports analytical solution of the Q-ball type which is stable quantum mechanically. The new solution engenders an interesting behavior, with the charge and energy densities unveiling a splitting profile.

  15. The Mathematics of Bouncing Balls.

    Science.gov (United States)

    Martin, Kathleen

    1989-01-01

    Describes an activity which uses the computer to produce an environment that encourages an inductive reasoning approach to ratio and proportion through a billiard ball simulation. Provides examples of graphs and bouncing ball data. (RT)

  16. A Spiky Ball

    OpenAIRE

    Naszódi, Márton

    2015-01-01

    The Illumination Problem may be phrased as the problem of covering a convex body in Euclidean $n$-space by a minimum number of translates of its interior. By a probabilistic argument, we show that, arbitrarily close to the Euclidean ball, there is a centrally symmetric convex body of illumination number exponentially large in the dimension.

  17. Have a Ball

    Institute of Scientific and Technical Information of China (English)

    程炜

    2003-01-01

    Before being sent to prison Carl drove big cars and ate in expensive restaurants. No one knew where he got his money but he was certainly having a ball. When the judge sentenced him.to prison he said, “I hope you have a bail, Carl.” To have a bait is to have a wonderful time.

  18. Analysis of Duration Risk of PERT Network Planning Project Based on Crystal Ball%基于Crystal Ball的PERT网络计划项目工期风险分析

    Institute of Scientific and Technical Information of China (English)

    胡静静

    2012-01-01

    文章介绍了网络计划技术,对PERT网络计划项目各活动持续时间的确定进行了分析,总结了使用Crystal Ball进行风险分析的步骤,构建了某PERT网络计划项目各活动的时问参数的Excel模型.在此基础上,使用Crystal Ball建立该项目的工期风险分析模型,并对该模型进行风险分析,获得有效的分析结果.

  19. suPAR: the molecular crystal ball

    DEFF Research Database (Denmark)

    Thunø, Maria; Macho, Betina; Eugen-Olsen, Jesper

    2009-01-01

    soluble urokinase Plasminogen Activator Receptor (suPAR) levels reflect inflammation and elevated suPAR levels are found in several infectious diseases and cancer. suPAR exists in three forms; suPAR(I-III), suPAR(II-III) and suPAR(I) which show different properties due to structural differences....... Studies suggest that full-length suPAR is a regulator of uPAR/uPA by actingas uPA-scavenger, whereas the cleaved suPAR(II-III) act as a chemotactic agent promoting the immune response via the SRSRY sequence in the linker-region. This review focus on the various suPAR fragments and their involvement...

  20. Educational Technology in the Crystal Ball.

    Science.gov (United States)

    Langham-Johnson, Shirley

    This paper predicts that microelectronic circuitry will have an impact on education comparable to that of the industrial revolution or the invention of the printing press. Present conditions influencing educational technology and trends are considered in light of five considerations: (1) recent redefinitions of what educational technology is; (2)…

  1. suPAR: The Molecular Crystal Ball

    Directory of Open Access Journals (Sweden)

    Maria Thunø

    2009-01-01

    Full Text Available soluble urokinase Plasminogen Activator Receptor (suPAR levels reflect inflammation and elevated suPAR levels are found in several infectious diseases and cancer. suPAR exists in three forms; suPARI-III, suPARII-III and suPARI which show different properties due to structural differences. Studies suggest that full-length suPAR is a regulator of uPAR/uPA by acting as uPA-scavenger, whereas the cleaved suPARII-III act as a chemotactic agent promoting the immune response via the SRSRY sequence in the linker-region. This review focus on the various suPAR fragments and their involvement in inflammation and pathogenic processes. We focus on the molecular mechanisms of the suPAR fragments and the link to the inflammatory process, as this could lead to medical applications in infectious and pathological conditions.

  2. A crystal ball made of agents

    Directory of Open Access Journals (Sweden)

    José Miguel Castillo

    2010-12-01

    Full Text Available This article presents an agent-based solution to model the opinions of an experts group with the aim of predicting possible future scenarios.The need to envision the future is not new; it has existed since the beginning of human-kind. What it is new is the applicable technology that is available in a specific period of time.It is not usual to find a critical social system which evolves according to predictable guidelines or tendencies. Because of that reason, technical prediction based on past and present data is not reliable.This paper includes the process description of eliciting information from a group of experts and a real case study.

  3. BLEACHING NEPTUNE BALLS

    Directory of Open Access Journals (Sweden)

    BONET Maria Angeles

    2014-05-01

    Full Text Available Posidonia Oceanic is a seaweed from Mediterranean Sea and it is more concentrated at the Balerian SEA. This implies the Valencian Community also. It forms vaste underwater meadows in the sea and are part of the Mediterranean ecosystem. It is a sea-grass specie with fruits and flowers. Leaves are ribbon-like and they grow in winter and at the end of summer some of them are separated and arrive to some sea line. Fuit is separated and can floate, it is known as “the olive of the sea” mainly in Italy, or as the Neptune Balls. As it can be used in different fields, it is is being studied in order ro have the precitice tests. Some authors have reported the manufacturing of fully bio-based comites with a gluten matrix by hot-press molding. And it has been considered as an effective insulator for building industry or even though to determine the presence of mercure in the Mediterranean sea some years ago. As many applications can be designed from that fibers, it has been considered to be bleached in order to used them in fashionable products. Consequently, its original brown color is not the most suitable one and it should be bleached as many other cellulosic fibers. The aim of this paper is to bleache neptune balls however, the inner fibers were not accessible at all and it implied not to bleach the inner fibers in the neptune ball. Further studiesd will consider bleaching the individualized fibers.

  4. Ball milling and annealing of Co-50 at% W Powders

    CSIR Research Space (South Africa)

    Bolokang, AS

    2013-04-01

    Full Text Available annealing of unmilled compacts yielded metastable phases. Upon 10 and 20 h ball milling of Co-W powder, no alloying was obtained. Although milling did not yield significant crystal changes in W and Co ground state struc- tures, its effect is evident during...

  5. High-Performance Ball Bearing

    Science.gov (United States)

    Bursey, Roger W., Jr.; Haluck, David A.; Olinger, John B.; Owen, Samuel S.; Poole, William E.

    1995-01-01

    High-performance bearing features strong, lightweight, self-lubricating cage with self-lubricating liners in ball apertures. Designed to operate at high speed (tens of thousands of revolutions per minute) in cryogenic environment like liquid-oxygen or liquid-hydrogen turbopump. Includes inner race, outer race, and cage keeping bearing balls equally spaced.

  6. High-Performance Ball Bearing

    Science.gov (United States)

    Bursey, Roger W., Jr.; Haluck, David A.; Olinger, John B.; Owen, Samuel S.; Poole, William E.

    1995-01-01

    High-performance bearing features strong, lightweight, self-lubricating cage with self-lubricating liners in ball apertures. Designed to operate at high speed (tens of thousands of revolutions per minute) in cryogenic environment like liquid-oxygen or liquid-hydrogen turbopump. Includes inner race, outer race, and cage keeping bearing balls equally spaced.

  7. Images in Christmas Balls

    CERN Document Server

    Van Beveren, E; Rupp, G; Beveren, Eef van; Kleefeld, Frieder; Rupp, George

    2006-01-01

    We describe light-reflection properties of spherically curved mirrors, like balls in the Christmas tree. In particular, we study the position of the image which is formed somewhere beyond the surface of a spherical mirror, when an eye observes the image of a pointlike light source. The considered problem, originally posed by Abu Ali Hasan Ibn al-Haitham -- alias Alhazen -- more than a millennium ago, turned out to have the now well known analytic solution of a biquadratic equation, being still of great relevance, e.g. for the aberration-free construction of telescopes. We do not attempt to perform an exhaustive survey of the rich historical and engineering literature on the subject, but develop a simple pedagogical approach to the issue, which we believe to be of continuing interest in view of its maltreating in many high-school textbooks.

  8. Unanticipated cardiac arrest under spinal anesthesia: An unavoidable mystery with review of current literature.

    Science.gov (United States)

    Kumari, Anita; Gupta, Ruchi; Bajwa, Sukhminder Jit Singh; Singh, Amrinder

    2014-01-01

    Cardiac arrest during anesthesia and perioperative period is a matter of grave concern for any anesthesiologist. But such mishaps have been reported for one reason or the other in the literary sciences. We are reporting the occurrence of unanticipated delayed cardiac arrest following spinal anesthesia in two young and healthy patients. Fortunately, these patients were successfully resuscitated with timely and appropriate cardiopulmonary resuscitative measures. Occurrence of such cases needs timely reporting and exploring all the possible causes of these unusual and possibly avoidable events. The present case reports are an important addition to a series of recently published mishaps that occurred during spinal anesthesia in young and healthy patients.

  9. The dynamics of hurricane balls

    Science.gov (United States)

    Andersen, W. L.; Werner, Steven

    2015-09-01

    We examine the theory of the hurricane balls toy. This toy consists of two steel balls, welded together that are sent spinning on a horizontal surface somewhat like a top. Unlike a top, at high frequency the symmetry axis approaches a limiting inclination that is not perpendicular to the surface. We calculate (and experimentally verify) the limiting inclinations for three toy geometries. We find that at high frequencies, hurricane balls provide an easily realized and testable example of the Poinsot theory of freely rotating symmetrical bodies.

  10. Difficult Airway Society 2015 guidelines for management of unanticipated difficult intubation in adults.

    Science.gov (United States)

    Frerk, C; Mitchell, V S; McNarry, A F; Mendonca, C; Bhagrath, R; Patel, A; O'Sullivan, E P; Woodall, N M; Ahmad, I

    2015-12-01

    These guidelines provide a strategy to manage unanticipated difficulty with tracheal intubation. They are founded on published evidence. Where evidence is lacking, they have been directed by feedback from members of the Difficult Airway Society and based on expert opinion. These guidelines have been informed by advances in the understanding of crisis management; they emphasize the recognition and declaration of difficulty during airway management. A simplified, single algorithm now covers unanticipated difficulties in both routine intubation and rapid sequence induction. Planning for failed intubation should form part of the pre-induction briefing, particularly for urgent surgery. Emphasis is placed on assessment, preparation, positioning, preoxygenation, maintenance of oxygenation, and minimizing trauma from airway interventions. It is recommended that the number of airway interventions are limited, and blind techniques using a bougie or through supraglottic airway devices have been superseded by video- or fibre-optically guided intubation. If tracheal intubation fails, supraglottic airway devices are recommended to provide a route for oxygenation while reviewing how to proceed. Second-generation devices have advantages and are recommended. When both tracheal intubation and supraglottic airway device insertion have failed, waking the patient is the default option. If at this stage, face-mask oxygenation is impossible in the presence of muscle relaxation, cricothyroidotomy should follow immediately. Scalpel cricothyroidotomy is recommended as the preferred rescue technique and should be practised by all anaesthetists. The plans outlined are designed to be simple and easy to follow. They should be regularly rehearsed and made familiar to the whole theatre team.

  11. Split-ball resonator

    CERN Document Server

    Kuznetsov, Arseniy I; Fu, Yuan Hsing; Viswanathan, Vignesh; Rahmani, Mohsen; Valuckas, Vytautas; Kivshar, Yuri; Pickard, Daniel S; Lukiyanchuk, Boris

    2014-01-01

    We introduce a new concept of split-ball resonator and demonstrate a strong omnidirectional magnetic dipole response for both gold and silver spherical plasmonic nanoparticles with nanometer-scale cuts. Tunability of the magnetic dipole resonance throughout the visible spectral range is demonstrated by a change of the depth and width of the nanoscale cut. We realize this novel concept experimentally by employing the laser-induced transfer method to produce near-perfect spheres and helium ion beam milling to make cuts with the nanometer resolution. Due to high quality of the spherical particle shape, governed by strong surface tension forces during the laser transfer process, and the clean, straight side walls of the cut made by helium ion milling, magnetic resonance is observed at 600 nm in gold and at 565 nm in silver nanoparticles. Structuring arbitrary features on the surface of ideal spherical resonators with nanoscale dimensions provides new ways of engineering hybrid resonant modes and ultra-high near-f...

  12. Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

    Directory of Open Access Journals (Sweden)

    Zhiliang Chen

    2016-07-01

    Full Text Available Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization of heavy metals in municipal solid waste incineration (MSWI fly ash. Three heavy metals (Cu, Cr, Pb loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a significant decrease in particle size, a rise in its BET-surface, and turning basic crystals therein into amorphous structures. The dissolution rate of acid buffering materials present in activated particles is enhanced, resulting in a rising pH value of the leachate, reducing the leaching out of some heavy metals.

  13. LHC gets the ball rolling

    CERN Multimedia

    2007-01-01

    A technique involving a small ball with a transmitter embedded inside it has been successfully tested in Sector 7-8. The ball is sent through the LHC beam pipes to check the LHC interconnections. The multidisciplinary team responsible for the RF ball project to check the interconnections. From left to right: Rhodri Jones (AB/BI), Eva Calvo (AB/BI), Francesco Bertinelli (AT/MCS), Sonia Bartolome Jimenez (TS/IC), Sylvain Weisz (TS/IC), Paul Cruikshank (AT/VAC), Willemjan Maan (AT/VAC), Alain Poncet (AT/MCS), Marek Gasior (AB/BI). During the tests the ball is inserted very carefully into the vacuum chamber.A game of ping-pong at the LHC? On 13 September a rather unusual test was carried out in Sector 7-8 of the accelerator. A ball just a bit smaller than a ping-pong ball was carefully introduced into one of the accelerator’s two vacuum pipes, where it travelled 800 metres in the space of a few mi...

  14. Difficult Airway Society 2015 guidelines for management of unanticipated difficult intubation in adults†

    Science.gov (United States)

    Frerk, C.; Mitchell, V. S.; McNarry, A. F.; Mendonca, C.; Bhagrath, R.; Patel, A.; O'Sullivan, E. P.; Woodall, N. M.; Ahmad, I.

    2015-01-01

    These guidelines provide a strategy to manage unanticipated difficulty with tracheal intubation. They are founded on published evidence. Where evidence is lacking, they have been directed by feedback from members of the Difficult Airway Society and based on expert opinion. These guidelines have been informed by advances in the understanding of crisis management; they emphasize the recognition and declaration of difficulty during airway management. A simplified, single algorithm now covers unanticipated difficulties in both routine intubation and rapid sequence induction. Planning for failed intubation should form part of the pre-induction briefing, particularly for urgent surgery. Emphasis is placed on assessment, preparation, positioning, preoxygenation, maintenance of oxygenation, and minimizing trauma from airway interventions. It is recommended that the number of airway interventions are limited, and blind techniques using a bougie or through supraglottic airway devices have been superseded by video- or fibre-optically guided intubation. If tracheal intubation fails, supraglottic airway devices are recommended to provide a route for oxygenation while reviewing how to proceed. Second-generation devices have advantages and are recommended. When both tracheal intubation and supraglottic airway device insertion have failed, waking the patient is the default option. If at this stage, face-mask oxygenation is impossible in the presence of muscle relaxation, cricothyroidotomy should follow immediately. Scalpel cricothyroidotomy is recommended as the preferred rescue technique and should be practised by all anaesthetists. The plans outlined are designed to be simple and easy to follow. They should be regularly rehearsed and made familiar to the whole theatre team. PMID:26556848

  15. Silicon Nitride Balls For Cryogenic Bearings

    Science.gov (United States)

    Butner, Myles F.; Ng, Lillian W.

    1990-01-01

    Resistance to wear greater than that of 440C steel. Experiments show lives of ball bearings immersed in liquid nitrogen or liquid oxygen increased significantly when 440C steel balls (running on 440C steel races) replaced by balls of silicon nitride. Developed for use at high temperatures, where lubrication poor or nonexistent. Best wear life of any bearing tested to date and ball material spalls without fracturing. Plans for future tests call for use of liquid oxygen as working fluid.

  16. Vertical bounce of two vertically aligned balls

    Science.gov (United States)

    Cross, Rod

    2007-11-01

    When a tennis ball rests on top of a basketball and both drop to the floor together, the tennis ball is projected vertically at high speed. A mass-spring model of the impact, as well as air track data, suggest that the tennis ball should be projected at relatively low speed. Measurements of the forces on each ball and the bounce of vertically aligned superballs are used to resolve the discrepancy.

  17. Does Ease to Block a Ball Affect Perceived Ball Speed? Examination of Alternative Hypotheses

    Science.gov (United States)

    Witt, Jessica K.; Sugovic, Mila

    2012-01-01

    According to an action-specific account of perception, the perceived speed of a ball can be a function of the ease to block the ball. Balls that are easier to stop look like they are moving slower than balls that are more difficult to stop. This was recently demonstrated with a modified version of the classic computer game Pong (Witt & Sugovic,…

  18. Idea Bank: Wiffle Ball Physics

    Science.gov (United States)

    Lancor, Rachael

    2009-01-01

    Projectile motion, a cornerstone topic of introductory physics, is usually a student's first exposure to the problem-solving techniques used in this subject. Often, this is an inactive learning experience--students work with pencil and paper to read and solve projectile motion problems (e.g., diagrams and descriptions of balls being hit, kicked,…

  19. The correct "ball bearings" data.

    Science.gov (United States)

    Caroni, C

    2002-12-01

    The famous data on fatigue failure times of ball bearings have been quoted incorrectly from Lieblein and Zelen's original paper. The correct data include censored values, as well as non-fatigue failures that must be handled appropriately. They could be described by a mixture of Weibull distributions, corresponding to different modes of failure.

  20. LHC gets the ball rolling

    CERN Multimedia

    2007-01-01

    1. The multidisciplinary team responsible for the RF ball project to check the interconnections. From left to right: Rhodri Jones (AB/BI), Eva Calvo (AB/BI), Francesco Bertinelli (AT/MCS), Sonia Bartolome Jimenez (TS/IC), Sylvain Weisz (TS/IC), Paul Cruikshank (AT/VAC), Willemjan Maan (AT/VAC), Alain Poncet (AT/MCS), Marek Gasior (AB/BI).2. During the tests the ball is inserted very carefully into the vacuum chamber.1. Le groupe pluridisciplinaire qui a mené le projet de balle RF pour vérifier les interconnexions avec, de gauche à droite, Rhodri Jones (AB/BI), Eva Calvo (AB/BI), Francesco Bertinelli (AT/MCS), Sonia Bartolome Jimenez (TS/IC), Sylvain Weisz (TS/IC), Paul Cruikshank (AT/VAC), Willemjan Maan (AT/VAC), Alain Poncet (AT/MCS) et Marek Gasior (AB/BI).2. Lors des tests, la balle est insérée dans la chambre à vide avec beaucoup de précaution.

  1. A Conjecture Concerning Ball Lightning

    CERN Document Server

    Sturrock, P A

    2016-01-01

    There is at present no theory that can explain the curious properties of ball lightning. This suggests that we may not be using the most appropriate concepts. The concept of a 'parallel space' may point the way to a valid theory.

  2. Playing Ball in a Space Station

    Science.gov (United States)

    Simoson, Andrew J.

    2006-01-01

    How does artificial gravity affect the path of a thrown ball? This paper contrasts ball trajectories on the Little Prince's asteroid planet B-612 and Arthur C. Clarke's rotating-drum spacecraft of 2001, and demonstrates curve balls with multiple loops in the latter environment.

  3. Influence of cation disorder on the magnetic properties of ball-milled ilmenite (FeTiO{sub 3})

    Energy Technology Data Exchange (ETDEWEB)

    Morup, Steen; Rasmussen, Helge K. [Department of Physics, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark); Brok, Erik [Department of Physics, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark); Center for Electron Nanoscopy, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark); Keller, Lukas [Laboratory for Neutron Scattering, Paul Scherrer Institute, CH-5232 Villigen PSI (Switzerland); Frandsen, Cathrine, E-mail: fraca@fysik.dtu.dk [Department of Physics, Technical University of Denmark, DK-2800 Kongens Lyngby (Denmark)

    2012-09-14

    We have investigated the evolution of crystal structure, cation disorder and magnetic properties of ilmenite (FeTiO{sub 3}) after increasing time of high-energy ball-milling in an inert atmosphere. Refinement of X-ray diffraction data show that the hexagonal crystal structure of ilmenite is maintained after high-energy ball-milling of up to 128 h, but neutron diffraction studies reveal significant cation redistribution of Fe{sup 2+} and Ti{sup 4+} ions in the ball-milled samples. Moessbauer spectroscopy studies show that the magnetic hyperfine field of Fe{sup 2+}, which is around 5 T before ball-milling, increases, and after milling times longer than 4 h a broad distribution of hyperfine fields with values up to around 40 T for Fe{sup 2+} is seen. This can be explained by the cation disorder induced by the ball-milling which affects the orbital contribution to the magnetic hyperfine field. In contrast to some ball-milled spinel ferrites, the Neel temperature of ilmenite is not significantly affected by the cation disorder. -- Highlights: Black-Right-Pointing-Pointer High-energy ball-milling of FeTiO{sub 3} results in cation disorder. Black-Right-Pointing-Pointer The magnetic hyperfine field of {sup 57}Fe is strongly affected by the ball-milling. Black-Right-Pointing-Pointer The Neel temperature of FeTiO{sub 3} is not significantly affected by cation disorder.

  4. Microstructural Evolution, Thermodynamics, and Kinetics of Mo-Tm2O3 Powder Mixtures during Ball Milling

    Directory of Open Access Journals (Sweden)

    Yong Luo

    2016-10-01

    Full Text Available The microstructural evolution, thermodynamics, and kinetics of Mo (21 wt % Tm2O3 powder mixtures during ball milling were investigated using X-ray diffraction and transmission electron microscopy. Ball milling induced Tm2O3 to be decomposed and then dissolved into Mo crystal. After 96 h of ball milling, Tm2O3 was dissolved completely and the supersaturated nanocrystalline solid solution of Mo (Tm, O was obtained. The Mo lattice parameter increased with increasing ball-milling time, opposite for the Mo grain size. The size and lattice parameter of Mo grains was about 8 nm and 0.31564 nm after 96 h of ball milling, respectively. Ball milling induced the elements of Mo, Tm, and O to be distributed uniformly in the ball-milled particles. Based on the semi-experimental theory of Miedema, a thermodynamic model was developed to calculate the driving force of phase evolution. There was no chemical driving force to form a crystal solid solution of Tm atoms in Mo crystal or an amorphous phase because the Gibbs free energy for both processes was higher than zero. For Mo (21 wt % Tm2O3, it was mechanical work, not the negative heat of mixing, which provided the driving force to form a supersaturated nanocrystalline Mo (Tm, O solid solution.

  5. Keeping your eyes continuously on the ball while running for catchable and uncatchable fly balls.

    Directory of Open Access Journals (Sweden)

    Dees B W Postma

    Full Text Available When faced with a fly ball approaching along the sagittal plane, fielders need information for the control of their running to the interception location. This information could be available in the initial part of the ball trajectory, such that the interception location can be predicted from its initial conditions. Alternatively, such predictive information is not available, and running to the interception location involves continuous visual guidance. The latter type of control would predict that fielders keep looking at the approaching ball for most of its flight, whereas the former type of control would fit with looking at the ball during the early part of the ball's flight; keeping the eyes on the ball during the remainder of its trajectory would not be necessary when the interception location can be inferred from the first part of the ball trajectory. The present contribution studied visual tracking of approaching fly balls. Participants were equipped with a mobile eye tracker. They were confronted with tennis balls approaching from about 20 m, and projected in such a way that some balls were catchable and others were not. In all situations, participants almost exclusively tracked the ball with their gaze until just before the catch or until they indicated that a ball was uncatchable. This continuous tracking of the ball, even when running close to their maximum speeds, suggests that participants employed continuous visual control rather than running to an interception location known from looking at the early part of the ball flight.

  6. Exact Wavelets on the Ball

    CERN Document Server

    Leistedt, B

    2012-01-01

    We develop an exact wavelet transform on the three-dimensional ball (i.e. on the solid sphere), which we name the flaglet transform. For this purpose we first construct an exact harmonic transform on the radial line using damped Laguerre polynomials and develop a corresponding quadrature rule. Combined with the spherical harmonic transform, this approach leads to a sampling theorem on the ball and a novel three-dimensional decomposition which we call the Fourier-Laguerre transform. We relate this new transform to the well-known Fourier-Bessel decomposition and show that band-limitness in the Fourier-Laguerre basis is a sufficient condition to compute the Fourier-Bessel decomposition exactly. We then construct the flaglet transform on the ball through a harmonic tiling, which is exact thanks to the exactness of the Fourier-Laguerre transform (from which the name flaglets is coined). The corresponding wavelet kernels have compact localisation properties in real and harmonic space and their angular aperture is i...

  7. Studies On Falling Ball Viscometry

    CERN Document Server

    Singh, Amit Vikram; Gupta-Bhaya, Pinaki

    2012-01-01

    A new method of accurate calculation of the coefficient of viscosity of a test liquid from experimentally measured terminal velocity of a ball falling in the test liquid contained in a narrow tube is described. The calculation requires the value of a multiplicative correction factor to the apparent coefficient of viscosity calculated by substitution of terminal velocity of the falling ball in Stokes formula. This correction factor, the so-called viscosity ratio, a measure of deviation from Stokes limit, arises from non-vanishing values of the Reynolds number and the ball/tube radius ratio. The method, valid over a very wide range of Reynolds number, is based on the recognition of a relationship between two measures of wall effect, the more widely investigated velocity ratio, defined as the ratio of terminal velocity in a confined medium to that in a boundless medium and viscosity ratio. The calculation uses two recently published correlation formulae based on extensive experimental results on terminal velocit...

  8. Ball Screw Actuator Including a Stop with an Integral Guide

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Perek, John (Inventor); Geck, Kellan (Inventor)

    2015-01-01

    An actuator includes a housing assembly, a ball nut, a ball screw, and a ball screw stop. The ball nut is rotationally mounted in the housing assembly, is adapted to receive an input torque, and is configured, upon receipt thereof, to rotate and supply a drive force. The ball screw is mounted within the housing assembly and extends through the ball nut. The ball screw has a first end and a second end, and is coupled to receive the drive force from the ball nut. The ball screw is configured, upon receipt of the drive force, to selectively translate between a stow position and a deploy position. The ball screw stop is mounted on the ball screw to translate therewith and is configured to at selectively engage the housing assembly while the ball screw is translating, and engage the ball nut when the ball screw is in the deploy position.

  9. Fluid Mechanics of Cricket and Tennis Balls

    Science.gov (United States)

    Mehta, Rabindra D.

    2009-11-01

    Aerodynamics plays a prominent role in defining the flight of a ball that is struck or thrown through the air in almost all ball sports. The main interest is in the fact that the ball can often deviate from its initial straight path, resulting in a curved, or sometimes an unpredictable, flight path. It is particularly fascinating that that not all the parameters that affect the flight of a ball are always under human influence. Lateral deflection in flight, commonly known as swing, swerve or curve, is well recognized in cricket and tennis. In tennis, the lateral deflection is produced by spinning the ball about an axis perpendicular to the line of flight, which gives rise to what is commonly known as the Magnus effect. It is now well recognized that the aerodynamics of sports balls are strongly dependent on the detailed development and behavior of the boundary layer on the ball's surface. A side force, which makes a ball curve through the air, can also be generated in the absence of the Magnus effect. In one of the cricket deliveries, the ball is released with the seam angled, which trips the laminar boundary layer into a turbulent state on that side. The turbulent boundary layer separates relatively late compared to the laminar layer on the other side, thereby creating a pressure difference and hence side force. The fluid mechanics of a cricket ball become very interesting at the higher Reynolds numbers and this will be discussed in detail. Of all the round sports balls, a tennis ball has the highest drag coefficient. This will be explained in terms of the contribution of the ``fuzz" drag and how that changes with Reynolds number and ball surface wear. It is particularly fascinating that, purely through historical accidents, small disturbances on the ball surface, such as the stitching on cricket balls and the felt cover on tennis balls are all about the right size to affect boundary layer transition and development in the Reynolds numbers of interest. The fluid

  10. Coefficient of Restitution of Wet Tennis Balls

    Directory of Open Access Journals (Sweden)

    Eugene Jang

    2014-12-01

    Full Text Available The coefficient of restitution of a damp tennis ball is of interest to tennis players. Using a spray bottle, water was added to a tennis ball and the mass of water on the wet ball was determined. The ball was then dropped from a fixed height of 0.86 m. The motion was recorded with a video camera and the bounce height was measured. Using the bounce height and the original height, the coefficient of restitution for that mass of added water was determined. The research found the mass of water added to the tennis ball to have a negatively linear relationship with the coefficient of restitution of the tennis ball.

  11. Coefficient of Restitution of Wet Tennis Balls

    Directory of Open Access Journals (Sweden)

    Eugene Jang

    2014-01-01

    Full Text Available The coefficient of restitution of a damp tennis ball is of interest to tennis players. Using a spray bottle, water was added to a tennis ball and the mass of water on the wet ball was determined. The ball was then dropped from a fixed height of 0.86 m. The motion was recorded with a video camera and the bounce height was measured. Using the bounce height and the original height, the coefficient of restitution for that mass of added water was determined. The research found the mass of water added to the tennis ball to have a negatively linear relationship with the coefficient of restitution of the tennis ball.

  12. Influence of cation disorder on the magnetic properties of ball-milled ilmenite (FeTiO3)

    DEFF Research Database (Denmark)

    Mørup, Steen; Rasmussen, Helge Kildahl; Brok, Erik;

    2012-01-01

    We have investigated the evolution of crystal structure, cation disorder and magnetic properties of ilmenite (FeTiO3) after increasing time of high-energy ball-milling in an inert atmosphere. Refinement of X-ray diffraction data show that the hexagonal crystal structure of ilmenite is maintained ...

  13. Multifractal properties of ball milling dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Budroni, M. A., E-mail: mabudroni@uniss.it; Pilosu, V.; Rustici, M. [Dipartimento di Chimica e Farmacia, Università degli Studi di Sassari, Via Vienna 2, Sassari 07100 (Italy); Delogu, F. [Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Università degli Studi di Cagliari, via Marengo 2, Cagliari 09123 (Italy)

    2014-06-15

    This work focuses on the dynamics of a ball inside the reactor of a ball mill. We show that the distribution of collisions at the reactor walls exhibits multifractal properties in a wide region of the parameter space defining the geometrical characteristics of the reactor and the collision elasticity. This feature points to the presence of restricted self-organized zones of the reactor walls where the ball preferentially collides and the mechanical energy is mainly dissipated.

  14. Multifractal properties of ball milling dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Budroni, M. A., E-mail: mabudroni@uniss.it; Pilosu, V.; Rustici, M. [Dipartimento di Chimica e Farmacia, Università degli Studi di Sassari, Via Vienna 2, Sassari 07100 (Italy); Delogu, F. [Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Università degli Studi di Cagliari, via Marengo 2, Cagliari 09123 (Italy)

    2014-06-15

    This work focuses on the dynamics of a ball inside the reactor of a ball mill. We show that the distribution of collisions at the reactor walls exhibits multifractal properties in a wide region of the parameter space defining the geometrical characteristics of the reactor and the collision elasticity. This feature points to the presence of restricted self-organized zones of the reactor walls where the ball preferentially collides and the mechanical energy is mainly dissipated.

  15. From Schwinger Balls to Curved Space

    CERN Document Server

    Allahbakhshi, Davood

    2016-01-01

    It is shown that the Reissner-Nordstrom black hole is also a gravitational Schwinger ball. It is also shown that both massless and massive-particle gravitational Schwinger balls are thermodynamic systems by deriving the first law of thermodynamics for them. Inconsistency between classical geometrical and microscopic definitions of the horizon is discussed. We propose a new metric, more consistent with microscopic picture of black hole, as gravitational Schwinger ball, by speculations. It has some interesting features.

  16. Ball Bearing Stacking Automation System

    Directory of Open Access Journals (Sweden)

    Shafeequerrahman S . Ahmed

    2013-01-01

    Full Text Available This document is an effort to introduce the concept of automation in small scale industries and or small workshops that are involved in the manufacturing of small objects such as nuts, bolts and ball bearing in this case. This an electromechanical system which includes certain mechanical parts that involves one base stand on which one vertical metallic frame is mounted and hinged to this vertical stand is an in humanized effort seems inadequate in this era making necessary the use of Electronics, Computer in the manufacturing processes leading to the concept of Automated Manufacturing System (AMS.The ball bearing stack automation is an effort in this regard. In our project we go for stack automation for any object for example a ball bearing, be that is still a manual system there. It will be microcontroller based project control system equipped with microcontroller 89C51 from any manufacturer like Atmel or Philips. This could have been easily implemented if a PLC could be used for manufacturing the staking unit but I adopted the microcontroller based system so that some more modification in the system can be effected at will as to use the same hardware .Although a very small object i.e. ball bearig or small nut and fixture will be tried to be stacked, the system with more precision and more power handling capacity could be built for various requirements of the industry. For increasing more control capacity, we can use another module of this series. When the bearing is ready, it will be sent for packing. This is sensed by an inductive sensor. The output will be proceeds by PLC and microcontroller card which will be driving the assembly in order to put it into pads or flaps. This project will also count the total number of bearings to be packed and will display it on a LCD for real time reference and a provision is made using a higher level language using hyper terminal of the computer

  17. Two-ball Newton's cradle.

    Science.gov (United States)

    Glendinning, Paul

    2011-12-01

    Newton's cradle for two balls with Hertzian interactions is considered as a hybrid system, and this makes it possible to derive return maps for the motion between collisions in an exact form despite the fact that the three-halves interaction law cannot be solved in closed form. The return maps depend on a constant whose value can only be determined numerically, but solutions can be written down explicitly in terms of this parameter, and we compare this with the results of simulations. The results are in fact independent of the details of the interaction potential.

  18. Left atrial ball valve thrombus

    Directory of Open Access Journals (Sweden)

    R. Balaji

    2013-10-01

    Full Text Available "Ball valve thrombus" which is a spherical free floating clot in left atrium is an often quoted, but uncommonly encountered complication in patients with severe mitral stenosis of rheumatic origin, who are in atrial fibrillation. We describe the case of a 31-year-old lady with rheumatic heart disease, severe mitral stenosis and moderately severe aortic stenosis who had undergone closed mitral valvotomy 13 years ago. The patient presented with an episode of non-exertional syncope and breathlessness on exertion of 6 months duration and was in normal sinus rhythm. Echocardiography facilitated ante-mortem diagnosis and prompt institution of surgery was life saving.

  19. The Soccer-Ball Problem

    Science.gov (United States)

    Hossenfelder, Sabine

    2014-07-01

    The idea that Lorentz-symmetry in momentum space could be modified but still remain observer-independent has received quite some attention in the recent years. This modified Lorentz-symmetry, which has been argued to arise in Loop Quantum Gravity, is being used as a phenomenological model to test possibly observable effects of quantum gravity. The most pressing problem in these models is the treatment of multi-particle states, known as the 'soccer-ball problem'. This article briefly reviews the problem and the status of existing solution attempts.

  20. The Soccer-ball Problem

    CERN Document Server

    Hossenfelder, S

    2014-01-01

    The idea that Lorentz-symmetry in momentum space could be modified but still remain observer-independent has received quite some attention in the recent years. Motivated by Loop Quantum Gravity, this modified Lorentz-symmetry is being used as a phenomenological model to test possibly observable effects of quantum gravity. The most pressing problem in these models is the treatment of multi-particle states, known as the "soccer-ball problem." This article briefly reviews the problem and the status of existing solution attempts.

  1. PREPARING NANO-CRYSTALLINE La DOPED WC/Co POWDER BY HIGH ENERGY BALL MILLING

    Institute of Scientific and Technical Information of China (English)

    S. Liu; D.Q. Yi; Y.X. Li; D. Zou

    2002-01-01

    The La doped WC/Co powder was prepared by high energy ball milling. The changesof crystal structure, micrograph and defect of the powder were investigated by means ofXRD (X-ray diffraction), SEM (scanning electron microscope) and DTA (differentialthermal analysis). The results show that adding trace La element into carbides iseffective to minish the grain size of WC/Co powder. The La doped carbides powderwith grain size of 30nm can be obtained after 1Oh ball milling. The XRD peak of Cophase disappeared after 20h ball milling, which indicated solid solution (or secondarysolid solution) of Co phase in WC phase. The La doped powder with grain size of1Ohm is obtained after 30h ball milling. A peak of heat release at the temperatureof 470℃ was emerged in DTA curve within the range of heating temperature, whichshowed that the crystal structure relaxation of the powder appeared in the process ofhigh energy ball milling. After consolidated the La doped WC/Co alloy by high energyball milling exhibits ultra-fine grain Sizes and better mechanical properties.

  2. Delayed Equation for Charged Rigid Nonrelativistic Ball

    CERN Document Server

    Vlasov, A A

    2002-01-01

    Simple expression for self-force acting on radiating rigid charged ball is derived (Sommerfeld ball). It is shown that appropriate delayed equation of motion has solutions in general differ from that for Sommerfeld sphere - there are no "radiationless" solutions, but there are oscillating without damping solutions though self-force has nonzero value.

  3. Process engineering with planetary ball mills.

    Science.gov (United States)

    Burmeister, Christine Friederike; Kwade, Arno

    2013-09-21

    Planetary ball mills are well known and used for particle size reduction on laboratory and pilot scales for decades while during the last few years the application of planetary ball mills has extended to mechanochemical approaches. Processes inside planetary ball mills are complex and strongly depend on the processed material and synthesis and, thus, the optimum milling conditions have to be assessed for each individual system. The present review focuses on the insight into several parameters like properties of grinding balls, the filling ratio or revolution speed. It gives examples of the aspects of grinding and illustrates some general guidelines to follow for modelling processes in planetary ball mills in terms of refinement, synthesis' yield and contamination from wear. The amount of energy transferred from the milling tools to the powder is significant and hardly measurable for processes in planetary ball mills. Thus numerical simulations based on a discrete-element-method are used to describe the energy transfer to give an adequate description of the process by correlation with experiments. The simulations illustrate the effect of the geometry of planetary ball mills on the energy entry. In addition the imaging of motion patterns inside a planetary ball mill from simulations and video recordings is shown.

  4. NCI and Leidos Play Ball | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer The ping of an aluminum bat off a ball or the thump of a pop-up fly ball caught in a glove are two sounds familiar to baseball fans. Slow-pitch softball sounds—like those in the August game between mixed teams of NCI and Leidos Biomedical Research (formerly SAIC-Frederick) players—are similar.

  5. Some Mathematics and Physics of Ball Games.

    Science.gov (United States)

    Hughes, D. E.

    1985-01-01

    Gives examples on the applications of arithmetic, geometry, and some calculus, vector algebra, and mechanics to ball games. Suggestions for further interesting investigations are provided together with references to other articles and books on applications of mathematics and physics to ball games and sports in general. (JN)

  6. Soccer Ball Lift Coefficients via Trajectory Analysis

    Science.gov (United States)

    Goff, John Eric; Carre, Matt J.

    2010-01-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…

  7. Coefficient of Restitution of a Tennis Ball

    Directory of Open Access Journals (Sweden)

    Andre Roux

    2007-06-01

    Full Text Available The coefficient of restitution (COR of a tennis ball was investigated over a range of impact velocities. It was found that the COR of the ball was lower than ATP regulations specify, and that the COR decreased with increasing impact velocity.

  8. Soccer Ball Lift Coefficients via Trajectory Analysis

    Science.gov (United States)

    Goff, John Eric; Carre, Matt J.

    2010-01-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…

  9. The principal time balls of New Zealand

    Science.gov (United States)

    Kinns, Roger

    2017-04-01

    Accurate time signals in New Zealand were important for navigation in the Pacific. Time balls at Wellington and Lyttelton were noted in the 1880 Admiralty list of time signals, with later addition of Otago. The time ball service at Wellington started in March 1864 using the first official observatory in New Zealand, but there was no Wellington time ball service during a long period of waterfront redevelopment during the 1880s. The time ball service restarted in November 1888 at a different harbour location. The original mechanical apparatus was used with a new ball, but the system was destroyed by fire in March 1909 and was never replaced. Instead, a time light service was inaugurated in 1912. The service at Lyttelton, near Christchurch, began in December 1876 after construction of the signal station there. It used telegraph signals from Wellington to regulate the time ball. By the end of 1909, it was the only official time ball in New Zealand, providing a service that lasted until 1934. The Lyttelton time ball tower was an iconic landmark in New Zealand that had been carefully restored. Tragically, the tower collapsed in the 2011 earthquakes and aftershocks that devastated Christchurch. A daily time ball service at Port Chalmers, near Dunedin, started in June 1867, initially using local observatory facilities. The service appears to have been discontinued in October 1877, but was re-established in April 1882 as a weekly service, with control by telegraph from Wellington. The service had been withdrawn altogether by the end of 1909. Auckland never established a reliable time ball service, despite provision of a weekly service for mariners by a public-spirited citizen between August 1864 and June 1866. A time ball was finally installed on the Harbour Board building in 1901, but the signal was unreliable and it ceased in 1902. Complaints from ships' masters led to various proposals to re-establish a service. These concluded with erection of a time ball on the new

  10. La balle et la plume

    Directory of Open Access Journals (Sweden)

    Peter Marquis

    2012-06-01

    Full Text Available Fin octobre 2008, la nouvelle fit l’effet d’une bombe : Barack Obama, alors candidat à la présidence américaine, demanda à la chaîne câblée Fox News de retarder le début du sixième match de la World Series de base-ball afin de diffuser un spot de campagne. Son adversaire, John McCain, soutenu par le camp républicain et une partie de la population, monta aussitôt au créneau pour dénoncer l’hérésie : s’arroger le droit de perturber cette grande finale du championnat au déroulement immuable reve...

  11. Flavonol Activation Defines an Unanticipated Ligand-Binding Site in the Kinase-RNase Domain of IRE1

    Energy Technology Data Exchange (ETDEWEB)

    Wiseman, R. Luke; Zhang, Yuhong; Lee, Kenneth P.K.; Harding, Heather P.; Haynes, Cole M.; Price, Joshua; Sicheri, Frank; Ron, David (Scripps); (Toronto); (NYUSM)

    2010-08-18

    Signaling in the most conserved branch of the endoplasmic reticulum (ER) unfolded protein response (UPR) is initiated by sequence-specific cleavage of the HAC1/XBP1 mRNA by the ER stress-induced kinase-endonuclease IRE1. We have discovered that the flavonol quercetin activates yeast IRE1's RNase and potentiates activation by ADP, a natural activating ligand that engages the IRE1 nucleotide-binding cleft. Enzyme kinetics and the structure of a cocrystal of IRE1 complexed with ADP and quercetin reveal engagement by quercetin of an unanticipated ligand-binding pocket at the dimer interface of IRE1's kinase extension nuclease (KEN) domain. Analytical ultracentrifugation and crosslinking studies support the preeminence of enhanced dimer formation in quercetin's mechanism of action. These findings hint at the existence of endogenous cytoplasmic ligands that may function alongside stress signals from the ER lumen to modulate IRE1 activity and at the potential for the development of drugs that modify UPR signaling from this unanticipated site.

  12. Effect of soya milk on nutritive, antioxidative, reological and textural properties of chocolate produced in a ball mill

    OpenAIRE

    Zarić Danica B.; Pajin Biljana S.; Rakin Marica B.; Šereš Zita I.; Dokić Ljubica P.; Tomić Jelena M.

    2011-01-01

    Chocolate is a complex rheological system in which non-fat cocoa particles and sugar particles are enveloped by crystal matrix of cocoa butter. Physical properties of chocolate depend on ingredient composition, method of production and properly performed pre-crystallization phase. In this work, chocolate was produced in an unconventional way, i.e. in a ball mill applying variable refining time (30, 60 and 90 min) and pre-crystallization temperature in chocolate masses (26, 28 and 30⁰C)....

  13. Cricket Ball Aerodynamics: Myth Versus Science

    Science.gov (United States)

    Mehta, Rabindra D.; Koga, Demmis J. (Technical Monitor)

    2000-01-01

    Aerodynamics plays a prominent role in the flight of a cricket ball released by a bowler. The main interest is in the fact that the ball can follow a curved flight path that is not always under the control of the bowler. ne basic aerodynamic principles responsible for the nonlinear flight or "swing" of a cricket ball were identified several years ago and many papers have been published on the subject. In the last 20 years or so, several experimental investigations have been conducted on cricket ball swing, which revealed the amount of attainable swing, and the parameters that affect it. A general overview of these findings is presented with emphasis on the concept of late swing and the effects of meteorological conditions on swing. In addition, the relatively new concept of "reverse" swing, how it can be achieved in practice and the role in it of ball "tampering", are discussed in detail. A discussion of the "white" cricket ball used in last year's World Cup, which supposedly possesses different swing properties compared to a conventional red ball, is also presented.

  14. BALL - biochemical algorithms library 1.3

    Directory of Open Access Journals (Sweden)

    Stöckel Daniel

    2010-10-01

    Full Text Available Abstract Background The Biochemical Algorithms Library (BALL is a comprehensive rapid application development framework for structural bioinformatics. It provides an extensive C++ class library of data structures and algorithms for molecular modeling and structural bioinformatics. Using BALL as a programming toolbox does not only allow to greatly reduce application development times but also helps in ensuring stability and correctness by avoiding the error-prone reimplementation of complex algorithms and replacing them with calls into the library that has been well-tested by a large number of developers. In the ten years since its original publication, BALL has seen a substantial increase in functionality and numerous other improvements. Results Here, we discuss BALL's current functionality and highlight the key additions and improvements: support for additional file formats, molecular edit-functionality, new molecular mechanics force fields, novel energy minimization techniques, docking algorithms, and support for cheminformatics. Conclusions BALL is available for all major operating systems, including Linux, Windows, and MacOS X. It is available free of charge under the Lesser GNU Public License (LPGL. Parts of the code are distributed under the GNU Public License (GPL. BALL is available as source code and binary packages from the project web site at http://www.ball-project.org. Recently, it has been accepted into the debian project; integration into further distributions is currently pursued.

  15. Designing hollow nano gold golf balls.

    Science.gov (United States)

    Landon, Preston B; Mo, Alexander H; Zhang, Chen; Emerson, Chris D; Printz, Adam D; Gomez, Alan F; DeLaTorre, Christopher J; Colburn, David A M; Anzenberg, Paula; Eliceiri, Matthew; O'Connell, Connor; Lal, Ratnesh

    2014-07-09

    Hollow/porous nanoparticles, including nanocarriers, nanoshells, and mesoporous materials have applications in catalysis, photonics, biosensing, and delivery of theranostic agents. Using a hierarchical template synthesis scheme, we have synthesized a nanocarrier mimicking a golf ball, consisting of (i) solid silica core with a pitted gold surface and (ii) a hollow/porous gold shell without silica. The template consisted of 100 nm polystyrene beads attached to a larger silica core. Selective gold plating of the core followed by removal of the polystyrene beads produced a golf ball-like nanostructure with 100 nm pits. Dissolution of the silica core produced a hollow/porous golf ball-like nanostructure.

  16. Shock-Absorbent Ball-Screw Mechanism

    Science.gov (United States)

    Hirr, Otto A., Jr.; Meneely, R. W.

    1986-01-01

    Actuator containing two ball screws in series employs Belleville springs to reduce impact loads, thereby increasing life expectancy. New application of springs increases reliability of equipment in which ball screws commonly used. Set of three springs within lower screw of ball-screw mechanism absorbs impacts that result when parts reach their upper and lower limits of movement. Mechanism designed with Belleville springs as shock-absorbing elements because springs have good energy-to-volume ratio and easily stacked to attain any stiffness and travel.

  17. Titanium carbide coatings for aerospace ball bearings

    Science.gov (United States)

    Boving, Hans J.; Haenni, Werner; Hintermann, HANS-E.

    1988-01-01

    In conventional ball bearings, steel to steel contacts between the balls and the raceways are at the origin of microwelds which lead to material transfer, surface roughening, lubricant breakdown, and finally to a loss in the bearing performances. To minimize the microwelding tendencies of the contacting partners it is necessary to modify their surface materials; the solid to solid collisions themselves are difficult to avoid. The use of titanium carbide coated steel balls can bring spectacular improvements in the performances and lifetimes of both oil-grease lubricated and oil-grease free bearings in a series of severe applications.

  18. Release Control of Dye from Agar Ball

    OpenAIRE

    板屋, 智之; 山村, 俊貴; 唐澤, 有太朗

    2013-01-01

    Agar is a special product of Nagano prefecture. To utilize agar gel as adsorbing or releasing material of dyes or drugs, spherical agar gel “agar ball” was prepared by dropping aqueous agar solution into salad oil. And releasing behavior of a dye (rhodamine B) from agar ball was studied. The dye is released easily from agar ball, but the release can be controlled by hybiridazation of agar and galatin. In addition, it was found that agar ball could extract the dye from oil phase containing the...

  19. Horizontal stability of a bouncing ball

    Science.gov (United States)

    McBennett, Brendan G.; Harris, Daniel M.

    2016-09-01

    We present an investigation of a partially elastic ball bouncing on a vertically vibrated concave parabolic surface in two dimensions. In particular, we demonstrate that simple vertical motion, wherein the ball bounces periodically at the parabola's vertex, is unstable to horizontal perturbations when the parabolic coefficient defining the surface shape exceeds a critical value. The result is a new periodic solution where the ball bounces laterally over the vertex. As the parabola is further steepened, this new solution also becomes unstable which gives rise to other complex periodic and chaotic bouncing states, all characterized by persistent lateral motion.

  20. Fabrication of nanocrystalline surface composite layer on Cu plate under ball collisions.

    Science.gov (United States)

    Romankov, S; Park, Y C; Yoon, J M

    2014-10-01

    It was demonstrated that the severe plastic deformation of a surface induced by repeated ball collisions can be effectively used for fabrication of the nanocrystalline surface composite layers. The Cu disk was fixed at the top of a vibration chamber and ball treated. Al, Zr, Ni, Co and Fe were introduced into a Cu plate as contaminants from the grinding media one after the other by 15-min ball treatment. The composite structure was formed as a result of mechanical intermixing of the components. The particle size in as-fabricated layer ranged from 2 nm to 20 nm, with average values of about 7 nm. As-fabricated layer contained non-equilibrium multicomponent solid solution based on FCC Cu crystal structure, Zr-based phase, nanosized steel debris and amorphous phase. The hardness of the as-fabricated composite was almost ten times that of the initial Cu plate.

  1. How Magnus Bends the Flying Ball--Experimenting and Modeling

    Science.gov (United States)

    Timková, V.; Ješková, Z.

    2017-01-01

    Students are well aware of the effect of the deflection of sports balls when they have been given a spin. A volleyball, tennis, or table tennis ball served with topspin results in an additional downward force that makes the ball difficult to catch and return. In soccer, the effect of sidespin causes the ball to curve unexpectedly sideways,…

  2. Does soccer ball heading cause retinal bleeding?

    Science.gov (United States)

    Reed, William F; Feldman, Kenneth W; Weiss, Avery H; Tencer, Alan F

    2002-04-01

    To define forces of youth soccer ball heading (headers) and determine whether heading causes retinal hemorrhage. Regional Children's Hospital, youth soccer camp. Male and female soccer players, 13 to 16 years old, who regularly head soccer balls. Dilated retinal examination, after 2-week header diary, and accelerometer measurement of heading a lofted soccer ball. Twenty-one youth soccer players, averaging 79 headers in the prior 2 weeks, and 3 players who did not submit header diaries lacked retinal hemorrhage. Thirty control subjects also lacked retinal hemorrhage. Seven subjects heading the ball experienced linear cranial accelerations of 3.7 +/- 1.3g. Rotational accelerations were negligible. Headers, not associated with globe impact, are unlikely to cause retinal hemorrhage. Correctly executed headers did not cause significant rotational acceleration of the head, but incorrectly executed headers might.

  3. DEVELOPMENT OF TECHNOLOGY FOR ANODE BALL PRODUCTION

    Directory of Open Access Journals (Sweden)

    G. V. Kozhevnikova

    2015-01-01

    Full Text Available Technology of copper anode balls manufacturing by means of cross-wedge rolling method is developed. The technology satisfies the requirements towards anode balls’ crystalline structure, form and geometrical dimensions accuracy.

  4. Hyperbolic monotonicity in the Hilbert ball

    Directory of Open Access Journals (Sweden)

    Reich Simeon

    2006-01-01

    Full Text Available We first characterize -monotone mappings on the Hilbert ball by using their resolvents and then study the asymptotic behavior of compositions and convex combinations of these resolvents.

  5. Static Load Distribution in Ball Bearings

    Science.gov (United States)

    Ricci, Mario

    2010-01-01

    A numerical procedure for computing the internal loading distribution in statically loaded, single-row, angular-contact ball bearings when subjected to a known combined radial and thrust load is presented. The combined radial and thrust load must be applied in order to avoid tilting between inner and outer rings. The numerical procedure requires the iterative solution of Z + 2 simultaneous nonlinear equations - where Z is the number of the balls - to yield an exact solution for axial and radial deflections, and contact angles. Numerical results for a 218 angular-contact ball bearing have been compared with those from the literature and show significant differences in the magnitudes of the ball loads, contact angles, and the extent of the loading zone.

  6. Bouncing Balls and Hot Rod Races.

    Science.gov (United States)

    Tibbs, Peggy; Sherrill, Donna

    This paper presents the Bouncing Ball Experiment which models quadratic and exponential functions, and the Hot Rod Races activity that explores velocity and acceleration. Activities include directions for the use of TI-82 and TI-83 calculators. (YDS)

  7. Dolphin underwater bait-balling behaviors in relation to group and prey ball sizes.

    Science.gov (United States)

    Vaughn-Hirshorn, Robin L; Muzi, Elisa; Richardson, Jessica L; Fox, Gabriella J; Hansen, Lauren N; Salley, Alyce M; Dudzinski, Kathleen M; Würsig, Bernd

    2013-09-01

    We characterized dusky dolphin (Lagenorhynchus obscurus) feeding behaviors recorded on underwater video, and related behaviors to variation in prey ball sizes, dolphin group sizes, and study site (Argentina versus New Zealand, NZ). Herding behaviors most often involved dolphins swimming around the side or under prey balls, but dolphins in Argentina more often swam under prey balls (48% of passes) than did dolphins in NZ (34% of passes). This result may have been due to differences in group sizes between sites, since groups are larger in Argentina. Additionally, in NZ, group size was positively correlated with proportion of passes that occurred under prey balls (pdolphins in Argentina more often swam through prey balls (8% of attempts) than did dolphins in NZ (4% of attempts). This result may have been due to differences in prey ball sizes between sites, since dolphins fed on larger prey balls in Argentina (>74m(2)) than in NZ (maximum 33m(2)). Additionally, in NZ, dolphins were more likely to swim through prey balls to capture fish when they fed on larger prey balls (p=0.025).

  8. Investigation on the Surface Coating of Grinding Balls

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The surface coating of grinding balls was investigated experimentally. The results show that a coating may form on the surface of grinding balls when Cr or Al powders are subjected to ball grinding. The plastic deformation of the ball surface plays an important role during the coating formation, and the strong binding force between the powders and the balls is a necessary pre-condition. The thickness of coating increases with the plasticity of the powders and the balls. Annealing the balls with coating will result in an obvious diffusion of the elements in the bonding zone of inter-face.

  9. Q-balls with scalar charges

    CERN Document Server

    Rubakov, V

    2010-01-01

    We consider Friedberg-Lee-Sirlin Q-balls in a (3+1)-dimensional model with vanishing scalar potential of one of the fields. The Q-ball is stabilized by the gradient energy of this field and carries scalar charge, over and beyond the global charge. The latter property is inherent also in a model with the scalar potential that does not vanish in some finite field region near the origin.

  10. Aerodynamic drag of modern soccer balls

    OpenAIRE

    Asai, Takeshi; SEO, KAZUYA

    2013-01-01

    Soccer balls such as the Adidas Roteiro that have been used in soccer tournaments thus far had 32 pentagonal and hexagonal panels. Recently, the Adidas Teamgeist II and Adidas Jabulani, respectively having 14 and 8 panels, have been used at tournaments; the aerodynamic characteristics of these balls have not yet been verified. Now, the Adidas Tango 12, having 32 panels, has been developed for use at tournaments; therefore, it is necessary to understand its aerodynamic characteristics. Through...

  11. A rotating ball inlet for on-line MALDI mass spectrometry.

    Science.gov (United States)

    Orsnes, H; Graf, T; Degn, H; Murray, K K

    2000-01-01

    The rotating ball inlet (ROBIN) is presented in a new design for on-line matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS). This method uses a capillary to deliver a matrix and analyte solution to the surface of a rotating ball upon which MALDI is carried out. The ball is in contact with a polymer gasket surrounding the capillary. Sample adhering to the surface of the ball is dragged past the gasket into the vacuum of the mass spectrometer where it is irradiated by a pulsed UV laser, and the resulting ions are mass-separated in a linear time-of-flight mass spectrometer. The mechanical sample introduction prevents clogging of the vacuum interface by matrix crystals or frozen solvent. Preliminary results from flow injection analysis (FIA) suggest that the new interface does not introduce a significant peak-tailing or memory effect. The system is capable of 20-30 h of continuous operation with a flow rate of 2 microL/min before cleaning of the ball is needed. With the prototype inlet, concentration detection limits are at the low micromolar level.

  12. Effect of a ball skill intervention on children's ball skills and cognitive functions

    NARCIS (Netherlands)

    Westendorp-Haverdings, Marieke; Houwen, Suzanne; Hartman, Esther; Mombarg, Remo; Smith, Joanne; Visscher, Chris

    Purpose: This study examined the effect of a 16-wk ball skill intervention on the ball skills, executive functioning (in terms of problem solving and cognitive flexibility), and in how far improved executive functioning leads to improved reading and mathematics performance of children with learning

  13. Keeping Your Eyes Continuously on the Ball While Running for Catchable and Uncatchable Fly Balls

    NARCIS (Netherlands)

    Postma, Dees B. W.; den Otter, A. Rob; Zaal, Frank T. J. M.

    2014-01-01

    When faced with a fly ball approaching along the sagittal plane, fielders need information for the control of their running to the interception location. This information could be available in the initial part of the ball trajectory, such that the interception location can be predicted from its

  14. Keeping Your Eyes Continuously on the Ball While Running for Catchable and Uncatchable Fly Balls

    NARCIS (Netherlands)

    Postma, Dees B. W.; den Otter, A. Rob; Zaal, Frank T. J. M.

    2014-01-01

    When faced with a fly ball approaching along the sagittal plane, fielders need information for the control of their running to the interception location. This information could be available in the initial part of the ball trajectory, such that the interception location can be predicted from its init

  15. A comparative study of two types of ball-on-ball collision

    Science.gov (United States)

    White, Colin

    2017-07-01

    This paper describes three methods of measuring the coefficient of restitution (CoR) for two different types of ball-on-ball collision. The first collision type (for which two different CoR measurement procedures are described) is a static, hanging steel ball forming part of a Newton’s cradle arrangement, which is then hit by its adjacent identical ball, swinging down from an angle. The second scenario (for which one CoR measurement procedure is described) is a snooker ball interaction in which the cue ball rolls in, and collides with, a static coloured ball (both balls being of a resin composition). The investigation requires only readily available and inexpensive equipment, together with an open-source video analysis programme, called ‘Tracker’2. Perhaps surprisingly, the experiment yields widely differing CoR values for the two types of interaction. This variance cannot be solely accounted for by the difference in physical properties of the respective balls’ compositions. The paper then describes, in theoretical terms, the details of the dynamic interactions in each example, and hence validates the surprising discrepancy in the two results obtained empirically.

  16. Effect of a ball skill intervention on children's ball skills and cognitive functions

    NARCIS (Netherlands)

    Westendorp-Haverdings, Marieke; Houwen, Suzanne; Hartman, Esther; Mombarg, Remo; Smith, Joanne; Visscher, Chris

    2014-01-01

    Purpose: This study examined the effect of a 16-wk ball skill intervention on the ball skills, executive functioning (in terms of problem solving and cognitive flexibility), and in how far improved executive functioning leads to improved reading and mathematics performance of children with learning

  17. Theory Creation, Modification, and Testing: An Information-Processing Model and Theory of the Anticipated and Unanticipated Consequences of Research and Development

    Science.gov (United States)

    Perla, Rocco J.; Carifio, James

    2011-01-01

    Background: Extending Merton's (1936) work on the consequences of purposive social action, the model, theory and taxonomy outlined here incorporates and formalizes both anticipated and unanticipated research findings in a unified theoretical framework. The model of anticipated research findings was developed initially by Carifio (1975, 1977) and…

  18. Physician supply forecast: better than peering in a crystal ball?

    Directory of Open Access Journals (Sweden)

    Leonard Christian

    2009-02-01

    Full Text Available Abstract Background Anticipating physician supply to tackle future health challenges is a crucial but complex task for policy planners. A number of forecasting tools are available, but the methods, advantages and shortcomings of such tools are not straightforward and not always well appraised. Therefore this paper had two objectives: to present a typology of existing forecasting approaches and to analyse the methodology-related issues. Methods A literature review was carried out in electronic databases Medline-Ovid, Embase and ERIC. Concrete examples of planning experiences in various countries were analysed. Results Four main forecasting approaches were identified. The supply projection approach defines the necessary inflow to maintain or to reach in the future an arbitrary predefined level of service offer. The demand-based approach estimates the quantity of health care services used by the population in the future to project physician requirements. The needs-based approach involves defining and predicting health care deficits so that they can be addressed by an adequate workforce. Benchmarking health systems with similar populations and health profiles is the last approach. These different methods can be combined to perform a gap analysis. The methodological challenges of such projections are numerous: most often static models are used and their uncertainty is not assessed; valid and comprehensive data to feed into the models are often lacking; and a rapidly evolving environment affects the likelihood of projection scenarios. As a result, the internal and external validity of the projections included in our review appeared limited. Conclusion There is no single accepted approach to forecasting physician requirements. The value of projections lies in their utility in identifying the current and emerging trends to which policy-makers need to respond. A genuine gap analysis, an effective monitoring of key parameters and comprehensive workforce planning are key elements to improving the usefulness of physician supply projections.

  19. Crystal balls, virtual realities and 'storylines'

    Energy Technology Data Exchange (ETDEWEB)

    Courtney, R.S.

    2001-07-01

    ''Projections'' of anthropogenic climate change reported in the Third Assessment Report (TAR) of the UN Intergovernmental Panel on Climate Change (IPCC) are assessed to be based on pseudo-science. (author)

  20. Preparation of Mo-Re-C samples containing Mo7Re13C with the β-Mn-type structure by solid state reaction of planetary-ball-milled powder mixtures of Mo, Re and C, and their crystal structures and superconductivity

    Science.gov (United States)

    Oh-ishi, Katsuyoshi; Nagumo, Kenta; Tateishi, Kazuya; Takafumi, Ohnishi; Yoshikane, Kenta; Sugiyama, Machiko; Oka, Kengo; Kobayashi, Ryota

    2017-01-01

    Mo-Re-C compounds containing Mo7Re13C with the β-Mn structure were synthesized with high-melting-temperature metals Mo, Re, and C powders using a conventional solid state method with a planetary ball milling machine instead of the arc melting method. Use of the ball milling machine was necessary to obtain Mo7Re13C with the β-Mn structure using the solid state method. Almost single-phase Mo7Re13C with a trace of impurity were obtained using the synthesis method. By XRF and lattice parameter measurements on the samples, Fe element existed in the compound synthesized using the planetary ball milling machine with a pot and balls made of steel, though Fe element was not detected in the compound synthesized using a pot and balls made of tungsten carbide. The former compound containg the Fe atom did not show superconductivity but the latter compound without the Fe atom showed superconductivity at 6.1 K.

  1. Ball machine usage in tennis: movement initiation and swing timing while returning balls from a ball machine and from a real server.

    Science.gov (United States)

    Carboch, Jan; Süss, Vladimir; Kocib, Tomas

    2014-05-01

    Practicing with the use of a ball machine could handicap a player compared to playing against an actual opponent. Recent studies have shown some differences in swing timing and movement coordination, when a player faces a ball projection machine as opposed to a human opponent. We focused on the time of movement initiation and on stroke timing during returning tennis serves (simulated by a ball machine or by a real server). Receivers' movements were measured on a tennis court. In spite of using a serving ball speed from 90 kph to 135 kph, results showed significant differences in movement initiation and backswing duration between serves received from a ball machine and serves received from a real server. Players had shorter movement initiation when they faced a ball machine. Backswing duration was longer for the group using a ball machine. That demonstrates different movement timing of tennis returns when players face a ball machine. Use of ball machines in tennis practice should be limited as it may disrupt stroke timing. Key pointsPlayers have shorter initial move time when they are facing the ball machine.Using the ball machine results in different swing timing and movement coordination.The use of the ball machine should be limited.

  2. Ball Machine Usage in Tennis: Movement Initiation and Swing Timing While Returning Balls from a Ball Machine and from a Real Server

    Science.gov (United States)

    Carboch, Jan; Süss, Vladimir; Kocib, Tomas

    2014-01-01

    Practicing with the use of a ball machine could handicap a player compared to playing against an actual opponent. Recent studies have shown some differences in swing timing and movement coordination, when a player faces a ball projection machine as opposed to a human opponent. We focused on the time of movement initiation and on stroke timing during returning tennis serves (simulated by a ball machine or by a real server). Receivers’ movements were measured on a tennis court. In spite of using a serving ball speed from 90 kph to 135 kph, results showed significant differences in movement initiation and backswing duration between serves received from a ball machine and serves received from a real server. Players had shorter movement initiation when they faced a ball machine. Backswing duration was longer for the group using a ball machine. That demonstrates different movement timing of tennis returns when players face a ball machine. Use of ball machines in tennis practice should be limited as it may disrupt stroke timing. Key points Players have shorter initial move time when they are facing the ball machine. Using the ball machine results in different swing timing and movement coordination. The use of the ball machine should be limited. PMID:24790483

  3. Silicon ball grid array chip carrier

    Science.gov (United States)

    Palmer, David W.; Gassman, Richard A.; Chu, Dahwey

    2000-01-01

    A ball-grid-array integrated circuit (IC) chip carrier formed from a silicon substrate is disclosed. The silicon ball-grid-array chip carrier is of particular use with ICs having peripheral bond pads which can be reconfigured to a ball-grid-array. The use of a semiconductor substrate such as silicon for forming the ball-grid-array chip carrier allows the chip carrier to be fabricated on an IC process line with, at least in part, standard IC processes. Additionally, the silicon chip carrier can include components such as transistors, resistors, capacitors, inductors and sensors to form a "smart" chip carrier which can provide added functionality and testability to one or more ICs mounted on the chip carrier. Types of functionality that can be provided on the "smart" chip carrier include boundary-scan cells, built-in test structures, signal conditioning circuitry, power conditioning circuitry, and a reconfiguration capability. The "smart" chip carrier can also be used to form specialized or application-specific ICs (ASICs) from conventional ICs. Types of sensors that can be included on the silicon ball-grid-array chip carrier include temperature sensors, pressure sensors, stress sensors, inertia or acceleration sensors, and/or chemical sensors. These sensors can be fabricated by IC processes and can include microelectromechanical (MEM) devices.

  4. Algorithm on robot soccer pass and shoot a ball

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Introduces of robot soccer's competition software of Harbin Institute of Technology(HIT), the con cept of running range and the method of calculating the running range for both the opponent and our teammates according to the distances Between the ball and robot soccers, and therefore the method of calculating the angle that the robot passes or shoots the ball according to the running ranges of both sides. And gives the examples of passing the ball when the ball's position is in the backcourt and shooting the ball when the ball's position is in the frontcourt.

  5. Relativistic-microwave theory of ball lightning

    Science.gov (United States)

    Wu, H.-C.

    2016-06-01

    Ball lightning, a fireball sometimes observed during lightnings, has remained unexplained. Here we present a comprehensive theory for the phenomenon: At the tip of a lightning stroke reaching the ground, a relativistic electron bunch can be produced, which in turn excites intense microwave radiation. The latter ionizes the local air and the radiation pressure evacuates the resulting plasma, forming a spherical plasma bubble that stably traps the radiation. This mechanism is verified by particle simulations. The many known properties of ball lightning, such as the occurrence site, relation to the lightning channels, appearance in aircraft, its shape, size, sound, spark, spectrum, motion, as well as the resulting injuries and damages, are also explained. Our theory suggests that ball lighting can be created in the laboratory or triggered during thunderstorms. Our results should be useful for lightning protection and aviation safety, as well as stimulate research interest in the relativistic regime of microwave physics.

  6. The bouncing ball through a geometrical series

    Science.gov (United States)

    Flores, Sergio; Alfaro, Luis L.; Chavez, Juan E.; Bastarrachea, Aztlan; Hurtado, Jazmin

    2008-10-01

    The mathematical representation of the physical situation related to a bouncing ball on the floor is an important understanding difficulty for most of the students during the introductory mechanics and mathematics courses. The research group named Physics and mathematics in context from the University of Ciudad Juarez is concerned about the versatility in the change from a mathematical representation to the own physical context of any problem under a traditional instruction. In this case, the main idea is the association of the physical properties of the bouncing ball situation to the nearest mathematical model based on a geometrical series. The proposal of the cognitive development is based on a geometrical series that shows the time the ball takes to stop. In addition, we show the behavior of the ratio of the consecutive heights during the motion.

  7. Biased discrete symmetry breaking and Fermi balls

    CERN Document Server

    MacPherson, A L; Macpherson, Alick L; Campbell, Bruce A

    1994-01-01

    The spontaneous breaking of an approximate discrete symmetry is considered, with the resulting protodomains of true and false vacuum being separated by domain walls. Given a strong, symmetric Yukawa coupling of the real scalar field to a generic fermion, the domain walls accumulate a gas of fermions, which modify the domain wall dynamics. The splitting of the degeneracy of the ground states results in the false vacuum protodomain structures eventually being fragmented into tiny false vacuum bags with a Fermi gas shell (Fermi balls), that may be cosmologically stable due to the Fermi gas pressure and wall curvature forces, acting on the domain walls. As fermions inhabiting the domain walls do not undergo number density freeze out, stable Fermi balls exist only if a fermion anti-fermion asymmetry occurs. Fermi balls formed with a new Dirac fermion that possesses no standard model gauge charges provide a novel cold dark matter candidate.

  8. Relativistic-microwave theory of ball lightning.

    Science.gov (United States)

    Wu, H-C

    2016-06-22

    Ball lightning, a fireball sometimes observed during lightnings, has remained unexplained. Here we present a comprehensive theory for the phenomenon: At the tip of a lightning stroke reaching the ground, a relativistic electron bunch can be produced, which in turn excites intense microwave radiation. The latter ionizes the local air and the radiation pressure evacuates the resulting plasma, forming a spherical plasma bubble that stably traps the radiation. This mechanism is verified by particle simulations. The many known properties of ball lightning, such as the occurrence site, relation to the lightning channels, appearance in aircraft, its shape, size, sound, spark, spectrum, motion, as well as the resulting injuries and damages, are also explained. Our theory suggests that ball lighting can be created in the laboratory or triggered during thunderstorms. Our results should be useful for lightning protection and aviation safety, as well as stimulate research interest in the relativistic regime of microwave physics.

  9. From Schwinger Balls to Black Holes

    CERN Document Server

    Allahbakhshi, Davood

    2016-01-01

    We have shown intriguing similarities between Schwinger balls and black holes. By considering black hole as a gravitational Schwinger ball, we have derived the Bekenstein-Hawking entropy and the first law of black hole thermodynamics as a direct result of the inverse area dependence of the gravitational force. It is also shown that the Planck length is nothing but the gravitational Schwinger length. The relation between the mass and the radius of the black hole is derived by considering the black hole as a Schwinger ball of gravitons. We show how the evolution of the entanglement entropy of the black hole, as Page introduced many years ago, can be obtained by including gravitons in the black hole's evaporation process and using a deformed EPR mechanism. Also this deformed EPR mechanism can solve the information paradox. We show how naive simultaneous usage of Page's argument and equivalence principle leads to firewall problem.

  10. Microstructure and Physical Properties of Tb2TiO5 Neutron Absorber Synthesized by Ball Milling and Sintering

    Science.gov (United States)

    Huang, Jinghua; Ran, Guang; Liu, Tengjiao; Shen, Qiang; Li, Ning

    2016-10-01

    Tb2TiO5 neutron absorber was synthesized by ball milling and sintering. Microstructure character of ball-milled Tb4O7-17.605%TiO2 (mass fraction, %) powders and sintered bulks was analyzed using XRD, SEM and TEM. The microhardness, coefficient of thermal expansion and thermal conductivity of sintered bulks were measured. The experiment results showed that the nanocrystalline solid solution was obtained during ball milling. After 96 h of ball milling, TiO2 was completely solved in Tb4O7 and the crystal size of Tb4O7 was up to 37 nm. The bulk materials prepared by cold isostatic pressing were sintered at 1300 °C. Tb2TiO5 bulks with an orthorhombic structure were obtained. The microhardness of sintered bulks, as well as the thermal conductivity, increased firstly with increasing ball milling time and then decreased. The coefficient of thermal expansion decreased initially and then increased with increasing ball milling time. For the sintered bulk with powder milled for 48 h, the highest values of both microhardness and thermal conductivity were observed, whereas the lowest coefficient of thermal expansion was exhibited. In addition, with increasing testing temperature, the thermal conductivity of sintered bulks initially fell and then rebounded while an opposite trend was found in the coefficient of thermal expansion.

  11. Dust ball physics and the Schwarzschild metric

    Science.gov (United States)

    Kassner, Klaus

    2017-08-01

    A physics-first derivation of the Schwarzschild metric is given. Gravitation is described in terms of the effects of tidal forces (or of spacetime curvature) on the volume of a small ball of test particles (a dust ball), freely falling after all particles were at rest with respect to each other initially. Because this formulation avoids the use of tensors, neither advanced tensor calculus nor sophisticated differential geometry are needed in the calculation. The derivation is not lengthy and it has visual appeal, so it may be useful in teaching.

  12. Q-Balls with Scalar Charge

    Science.gov (United States)

    Levin, A.; Rubakov, V.

    We consider Friedberg-Lee-Sirlin Q-balls in a (3+1)-dimensional model with vanishing scalar potential of one of the fields. We show that, unlike in (2+1) and (1+1) dimensions, the Q-ball is stabilized by the gradient energy of this field and carries scalar charge, over and beyond the global charge. The latter property is also inherent in a model with the scalar potential that does not vanish in a finite field region near the origin.

  13. Soccer ball lift coefficients via trajectory analysis

    Energy Technology Data Exchange (ETDEWEB)

    Goff, John Eric [Department of Physics, Lynchburg College, Lynchburg, VA 24501 (United States); Carre, Matt J, E-mail: goff@lynchburg.ed [Department of Mechanical Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom)

    2010-07-15

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin parameters that have not been obtained by today's wind tunnels. Our trajectory analysis technique is not only a valuable tool for professional sports scientists, it is also accessible to students with a background in undergraduate-level classical mechanics.

  14. Modern trends in technical crystallization

    Science.gov (United States)

    Matz, G.

    1980-04-01

    Interesting and significant developments have occurred in the last decade in both crystallization equipment and in the theory of crystallization process. In the field of technical crystallization new crystallizers have been developed and computer modelling has become important in scaling up and in the achievement of increased performance. The DP-Kristaller developed by Escher-Wyss-Tsukishima, the Brodie purifier, the sieve tray column having dancing balls, the automated multiple crystallization process due to Mützenberg and Saxer and the double belt cooler, all of which represent technical developments, are described in the first section. The second part of the paper reviews computer modelling of the fluidized bed crystallizer, chemical precipitation, flaking and prilling. Finally, there is a brief discussion of the impact of technical crystallization processes on environmental protection.

  15. Reasonable Ball Size of Ball Mill for Preparing Coal Water Fuel and Forecasting Productive Capacity

    Institute of Scientific and Technical Information of China (English)

    张荣曾; 刘炯天; 徐志强; 郑明

    2002-01-01

    By using the matrix theory, a 5-parameter grinding mathema tical model is established. Based on the properties of feed coal and requirement s for size distribution of final product, the model gives the required grinding probability for various particles and corresponding ball size distribution. By u sing this model, 3 different sizes of ball mill are designed and put into commer cial use for coal water fuel. The forecasted ball mill capacity, the particle si zes and particle size distribution as well as the coal water fuel quality parame ters are all in line with industrial operation results, which have proved the su itability of the model.

  16. Levitation of an iron ball in midair without active control

    Science.gov (United States)

    Sasaki, S.; Yagi, I.; Murakami, M.

    2004-02-01

    An iron ball floats in midair in a plastic box when several iron balls were attracted by a permanent magnet. A complex interaction between magnetized sphere materials and a lifting magnet enabled the suspension of an iron ball. The balls in the first row are simply attracted by the lifting magnet. The ball in the second row is also attracted by the lifting magnet, however, due to the repulsive forces exerted from the balls sitting above, it can float in midair. We also found that there are two stable positions for the ball to float. The floating ball could be transported from one equilibrium position to another by simply rotating the lifting magnet. This will make it possible to construct a noncontact load transport device.

  17. Soccer Ball Production for Nike in Pakistan

    NARCIS (Netherlands)

    K.A. Siegmann (Karin Astrid)

    2008-01-01

    textabstractThis paper looks at how Nike’s soccer ball suppliers (previous and current) in Sialkot (Pakistan) fare in relation to the company’s code of ethics. While minimum required working conditions are implemented, the criteria for social and environmental compliance are not met with. The

  18. Selection of Parameters in Ball-Spinning

    Institute of Scientific and Technical Information of China (English)

    Maosheng LI; Yongnian YAN; Shihong ZHANG; Dachang KANG

    2004-01-01

    Nowadays, with the development of spinning processes, more and more systematic research about spinning parameters has been published. Based on these results, a routing about how to select spinning parameters has been gradually formed. However, ball spinning, due to its own features plus research lack, is still unclear about its parameter selections. In addition, some manufacture-enterprises only notice the use of this technique whereas ignore the theory creation. The optimal parameters about the ball spinning although have been released from these enterprises but in fact not a helpful theory for other researchers and producers. Focus on selecting the parameters based on the trial-and-error, this article has carried a series of experiments to study the influence on the spinning working course from those parameters, especially the peeling phenomena, and the tube diameter bulging. An optimal graph of the working angle, the axial feeding rate, and the acceptable working course is put forward. Additionally, based on the theory of the minimal reduction rate, the selection of the ball diameter is finally described. Thus, it has given the rules to get the proper parameters in ball spinning.

  19. Soccer Ball Production for Nike in Pakistan

    NARCIS (Netherlands)

    K.A. Siegmann (Karin Astrid)

    2008-01-01

    textabstractThis paper looks at how Nike’s soccer ball suppliers (previous and current) in Sialkot (Pakistan) fare in relation to the company’s code of ethics. While minimum required working conditions are implemented, the criteria for social and environmental compliance are not met with. The multin

  20. Fractal Aggregates in Tennis Ball Systems

    Science.gov (United States)

    Sabin, J.; Bandin, M.; Prieto, G.; Sarmiento, F.

    2009-01-01

    We present a new practical exercise to explain the mechanisms of aggregation of some colloids which are otherwise not easy to understand. We have used tennis balls to simulate, in a visual way, the aggregation of colloids under reaction-limited colloid aggregation (RLCA) and diffusion-limited colloid aggregation (DLCA) regimes. We have used the…

  1. CFD analysis of a ball check microvalve

    Science.gov (United States)

    Cǎlimǎnescu, Ioan; Dumitrache, Constantin L.; Grigorescu, Lucian

    2015-02-01

    The microvalves with balls as seen before are used in many applications and their behaviour in terms of fluid dynamics mainly at their opening time (when as demonstrated the ball is bouncing up and down altering the flow parameters) is of a paramount importance. The present study is focused on a micro check ball valve circulating a fluid air-like (with the same constant proprieties). The CFD model is taking into account a transitory zone of functioning from zero time when the pressure inside a "tank" is reaching the opening pressure of the valve, to the final step 0.05 seconds when the ball is stabilizing after bouncing up and down. The geometry of the valve with dimensions in μm is given below (the model is comprising a "slice" of 5 μm thickness extracted from the entire valve. In this paper by using advanced numeric techniques, the behavior of the valve in its transitory opening stage was studied with credible and useful results for further optimisation studies.

  2. A plasma ball in the Microcosm museum

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    Plasma balls, like the one shown here, are displayed in the Microcosm exhibition where families can visit to learn more about the experiments carried out in a research institute like CERN. Hands-on activities allow visitors to get a step closer to the research activities carried out at CERN.

  3. Renal fungus ball: a challenging clinical problem.

    Science.gov (United States)

    Tan, Wei Phin; Turba, Ulku C; Deane, Leslie A

    2017-04-28

    We describe a case of renal pelvi-ureteric fungus ball managed with placement of two nephrostomy tubes and amphotericin B irrigation through a nephrostomy tube with the other to free drain. A 46-year-old man with uncontrolled Type 2 diabetes mellitus was referred to the urology clinic for workup of recurrent urinary tract infection. Urine culture grew Candida albicans. The patient was started on oral fluconazole therapy. Cystoscopy and cystogram revealed a grade 3 left vesicoureteral reflux and right retrograde pyelogram revealed a filling defect in the right renal pelvis extending into the proximal ureter with severe hydroureteronephrosis. Two nephrostomy tubes were placed (mid-pole and lower pole) to ensure that the system was not obstructed. Amphotericin B (50 mg/1000 ml normal saline) irrigation was then instilled through the mid-pole nephrostomy tube at a rate of 30 ml/h with the lower pole nephrostomy tube to free drain. An antegrade nephrostogram was performed after 5 days of amphotericin B instillation, showing complete resolution of the fungus ball. The patient is awaiting definitive minimally invasive management of the distal ureteral narrowing. Renal and pelvi-ureteric fungus ball is a challenging clinical entity. It must be addressed promptly and efficiently to be successful. We describe a minimally invasive approach that was tolerated well and resulted in complete clearance of the fungus ball in a relatively short time frame.

  4. Dark Matter Balls Help Supernovae to Explode

    CERN Document Server

    Froggatt, Colin D

    2015-01-01

    As a solution to the well-known problem that the shock wave potentially responsible for the explosion of a supernova actually tends to stall, we propose a new energy source arising from our model for dark matter. Our earlier model proposed that dark matter should consist of cm-large white dwarf-like objects kept together by a skin separating two different sorts of vacua. These dark matter balls or pearls will collect in the middle of any star throughout its lifetime. At some stage during the development of a supernova the balls will begin to take in neutrons and then other surrounding material. By passing into a ball nucleons fall through a potential of order 10 MeV, causing a severe production of heat - of order 10 foe for a solar mass of material eaten by the balls. The temperature in the iron core will thereby be raised, splitting up the iron into smaller nuclei. This provides a mechanism for reviving the shock wave when it arrives and making the supernova explosion really occur. The onset of the heating d...

  5. 4. pi. physics with the plastic ball

    Energy Technology Data Exchange (ETDEWEB)

    Gutbrod, H.H.; Loehner, H.; Poskanzer, A.M.; Renner, T.; Riedesel, H.; Ritter, H.G.; Warwick, A.; Weik, F.; Wieman, H.

    1982-10-01

    4 ..pi.. data taken with the Plastic Ball show that cluster production in relativistic nuclear collisions depends on both the size of the participant volume and the finite size of the cluster. The measurement of the degree of thermalization and the search for collective flow will permit the study of the applicability of macroscopic concepts such as temperature and density.

  6. Holomorphic Spaces in the Unit Ball of

    Directory of Open Access Journals (Sweden)

    Augusto Guadalupe Miss Paredes

    2013-01-01

    Full Text Available We introduce the and vector spaces of holomorphic functions defined in the unit ball of , generalizing previous work like Ouyang et al. (1998, Stroethoff (1989, and Choa et al. (1992. Likewise, we characterize those spaces in terms of harmonic majorants as a generalization of Arellano et al. (2000.

  7. Design of Ball-Milling Experiments on Bi2Te3 Thermoelectric Material

    Science.gov (United States)

    Kanatzia, A.; Papageorgiou, Ch.; Lioutas, Ch.; Kyratsi, Th.

    2013-07-01

    In this work, factorial ball-milling experiments have been applied to Bi2Te3 material, for the first time, aiming to investigate the effect of the main process parameters on the structural features and thermoelectric properties of the ball-milled materials. The selected main parameters were the duration of milling, the speed, and the ball-to-material ratio. Analysis suggests a strong effect of the speed and duration of processing, whereas the ball-to-material ratio is of minor importance. This approach is advantageous for better understanding of the milling mechanism and the importance of the role of each independent parameter as well as their interaction. All experiments led to nanocrystalline Bi2Te3, whose structural features were studied. The nanocrystalline size was estimated based on x-ray diffraction analysis, while transmission electron microscopy (TEM) studies were also performed to confirm the presence of nanoscale crystals. A mathematical model was developed based on statistical analysis for prediction of the crystalline size and the Seebeck coefficient of the nanopowders. The thermoelectric properties were also investigated on selected, highly dense pellets fabricated via hot-pressing of the nanopowders.

  8. Temperature and Coefficient of Restitution of a Table Tennis Ball

    Directory of Open Access Journals (Sweden)

    Yoonyoung Chang

    2016-01-01

    Full Text Available The coefficient of restitution (COR of a bouncing table tennis ball was measured at varying ball temperatures with a Motion Detector. It was found that there is a negative linear relationship between the COR and the temperature of the table tennis ball for temperatures ranging from 5 to 56 ̊C.

  9. Frictional torque numbers for ball cup and journal bearings

    OpenAIRE

    Ligterink, D.J.

    1982-01-01

    Plastic bearing material wears in ball cup and journal bearings. Contact areas in the ball cup and the journal bearing increase. The frictional torque needed to rotate the ball or journal also increases. When the coefficient of friction is assumed to be constant during wearing out, the frictional torque increases to a maximum of 1.273 times the frictional torque at zero wear.

  10. Frictional torque numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.

    1982-01-01

    Plastic bearing material wears in ball cup and journal bearings. Contact areas in the ball cup and the journal bearing increase. The frictional torque needed to rotate the ball or journal also increases. When the coefficient of friction is assumed to be constant during wearing out, the frictional t

  11. The reaction of interest rates to unanticipated Federal Reserve actions and statements, 1977-1984: implications for the money announcement controversy

    OpenAIRE

    Timothy Q. Cook; Thomas K. Hahn

    1986-01-01

    Considerable attention has been devoted to the reaction of interest rates, foreign exchange rates, and stock prices to unanticipated money growth revealed by the weekly M1 money stock announcement. Numerous articles have attempted to explain why nominal interest rates rise following the announcement of an M1 figure higher than expected and fall when an M1 figure is lower than expected. The major controversy in this literature is whether the observed reaction of interest rates reflects changes...

  12. Clinical exome sequencing for cerebellar ataxia and spastic paraplegia uncovers novel gene–disease associations and unanticipated rare disorders

    Science.gov (United States)

    van de Warrenburg, Bart P; Schouten, Meyke I; de Bot, Susanne T; Vermeer, Sascha; Meijer, Rowdy; Pennings, Maartje; Gilissen, Christian; Willemsen, Michèl AAP; Scheffer, Hans; Kamsteeg, Erik-Jan

    2016-01-01

    Cerebellar ataxia (CA) and hereditary spastic paraplegia (HSP) are two of the most prevalent motor disorders with extensive locus and allelic heterogeneity. We implemented clinical exome sequencing, followed by filtering data for a ‘movement disorders' gene panel, as a generic test to increase variant detection in 76 patients with these disorders. Segregation analysis or phenotypic re-evaluation was utilized to substantiate findings. Disease-causing variants were identified in 9 of 28 CA patients, and 8 of 48 HSP patients. In addition, possibly disease-causing variants were identified in 1 and 8 of the remaining CA and HSP patients, respectively. In 10 patients with CA, the total disease-causing or possibly disease-causing variants were detected in 8 different genes, whereas 16 HSP patients had such variants in 12 different genes. In the majority of cases, the identified variants were compatible with the patient phenotype. Interestingly, in some patients variants were identified in genes hitherto related to other movement disorders, such as TH variants in two siblings with HSP. In addition, rare disorders were uncovered, for example, a second case of HSP caused by a VCP variant. For some patients, exome sequencing results had implications for treatment, exemplified by the favorable L-DOPA treatment in a patient with HSP due to ATP13A2 variants (Parkinson type 9). Thus, clinical exome sequencing in this cohort of CA and HSP patients suggests broadening of disease spectra, revealed novel gene–disease associations, and uncovered unanticipated rare disorders. In addition, clinical exome sequencing results have shown their value in guiding practical patient management. PMID:27165006

  13. MeSHy: Mining unanticipated PubMed information using frequencies of occurrences and concurrences of MeSH terms.

    Science.gov (United States)

    Theodosiou, T; Vizirianakis, I S; Angelis, L; Tsaftaris, A; Darzentas, N

    2011-12-01

    PubMed is the most widely used database of biomedical literature. To the detriment of the user though, the ranking of the documents retrieved for a query is not content-based, and important semantic information in the form of assigned Medical Subject Headings (MeSH) terms is not readily presented or productively utilized. The motivation behind this work was the discovery of unanticipated information through the appropriate ranking of MeSH term pairs and, indirectly, documents. Such information can be useful in guiding novel research and following promising trends. A web-based tool, called MeSHy, was developed implementing a mainly statistical algorithm. The algorithm takes into account the frequencies of occurrences, concurrences, and the semantic similarities of MeSH terms in retrieved PubMed documents to create MeSH term pairs. These are then scored and ranked, focusing on their unexpectedly frequent or infrequent occurrences. MeSHy presents results through an online interactive interface facilitating further manipulation through filtering and sorting. The results themselves include the MeSH term pairs, along with MeSH categories, the score, and document IDs, all of which are hyperlinked for convenience. To highlight the applicability of the tool, we report the findings of an expert in the pharmacology field on querying the molecularly-targeted drug imatinib and nutrition-related flavonoids. To the best of our knowledge, MeSHy is the first publicly available tool able to directly provide such a different perspective on the complex nature of published work. Implemented in Perl and served by Apache2 at http://bat.ina.certh.gr/tools/meshy/ with all major browsers supported. Copyright © 2011 Elsevier Inc. All rights reserved.

  14. A New Shaping Model for Green Ceramic Balls

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...

  15. Steel balls forming by cross rolling with upsetting

    Directory of Open Access Journals (Sweden)

    Z. Pater

    2013-01-01

    Full Text Available The paper describes a process of forming four balls with a diameter of 22 mm by means of cross rolling with upsetting. The paper also presents the tool used to form semi-finished balls. Owing to the application of the finite element method (FEM, the course of the rolling process as well as temperature and strain distributions in the obtained balls could be presented. The rolling tests conducted in laboratory conditions at the Lublin University of Technology have proved that the balls produced with the developed rolling method meet the demands for grinding media used in ball mills.

  16. Lawn tennis balls, Rolling friction experiment and Trouton viscosity

    CERN Document Server

    Singh, Ankit; Kulkarni, Kaustubh; Budhraja, Abhishek; Tej, K R Sai; Sankarlingam, Satish; Biswas, Anindya Kumar

    2008-01-01

    Three lawn tennis balls were arbitrarily taken. One ball was new, one was moderately old and another was old. We have fabricated a conveyor belt set-up and measured rolling friction coefficients, $\\mu_{r}$, of the three balls as a function of their angular velocities, $\\omega$. For the new ball, quadratic fit is perfect. For the moderately old ball, linear fit is accurate. In all the three cases, from linear fits, we obtain $k_{rol}$, where, $\\mu_{r}= k_{rol} \\omega + intercept$. We deduce $k_{rol}$ theoretically also, assuming Trouton ratio as three. The experimental results and theoretical estimates are of the same order of magnitude.

  17. The strange flight behaviour of slowly spinning soccer balls

    Science.gov (United States)

    Mizota, Taketo; Kurogi, Kouhei; Ohya, Yuji; Okajima, Atsushi; Naruo, Takeshi; Kawamura, Yoshiyuki

    2013-05-01

    The strange three-dimensional flight behaviour of slowly spinning soccer balls is one of the most interesting and unknown phenomenon associated with the trajectories of sports balls. Many spectators have experienced numerous exciting and emotional instances while observing the curious flight behaviour of these balls. We examine the aerodynamic mechanisms of erratic ball behaviours through real flight observations, unsteady force measurements and flow pattern visualisations. The strange behaviour is elucidated by the relationship between the unsteady forces on the ball and the wake flow. The irregular changes in position for twin longitudinal vortices have already been discovered in the supercritical Reynolds number region of a sphere with a smooth surface. This finding is applicable to the strange behaviour of the flight of soccer balls with this supercritical flow. The players, spectators, and television viewers will gain greater insight into the effects of soccer ball flights.

  18. Ball Machine Usage in Tennis: Movement Initiation and Swing Timing While Returning Balls from a Ball Machine and from a Real Server

    Directory of Open Access Journals (Sweden)

    Jan Carboch, Vladimir Süss, Tomas Kocib

    2014-06-01

    Full Text Available Practicing with the use of a ball machine could handicap a player compared to playing against an actual opponent. Recent studies have shown some differences in swing timing and movement coordination, when a player faces a ball projection machine as opposed to a human opponent. We focused on the time of movement initiation and on stroke timing during returning tennis serves (simulated by a ball machine or by a real server. Receivers’ movements were measured on a tennis court. In spite of using a serving ball speed from 90 kph to 135 kph, results showed significant differences in movement initiation and backswing duration between serves received from a ball machine and serves received from a real server. Players had shorter movement initiation when they faced a ball machine. Backswing duration was longer for the group using a ball machine. That demonstrates different movement timing of tennis returns when players face a ball machine. Use of ball machines in tennis practice should be limited as it may disrupt stroke timing.

  19. Perceptual elements in Penn & Teller's "Cups and Balls" magic trick.

    Science.gov (United States)

    Rieiro, Hector; Martinez-Conde, Susana; Macknik, Stephen L

    2013-01-01

    Magic illusions provide the perceptual and cognitive scientist with a toolbox of experimental manipulations and testable hypotheses about the building blocks of conscious experience. Here we studied several sleight-of-hand manipulations in the performance of the classic "Cups and Balls" magic trick (where balls appear and disappear inside upside-down opaque cups). We examined a version inspired by the entertainment duo Penn & Teller, conducted with three opaque and subsequently with three transparent cups. Magician Teller used his right hand to load (i.e. introduce surreptitiously) a small ball inside each of two upside-down cups, one at a time, while using his left hand to remove a different ball from the upside-down bottom of the cup. The sleight at the third cup involved one of six manipulations: (a) standard maneuver, (b) standard maneuver without a third ball, (c) ball placed on the table, (d) ball lifted, (e) ball dropped to the floor, and (f) ball stuck to the cup. Seven subjects watched the videos of the performances while reporting, via button press, whenever balls were removed from the cups/table (button "1") or placed inside the cups/on the table (button "2"). Subjects' perception was more accurate with transparent than with opaque cups. Perceptual performance was worse for the conditions where the ball was placed on the table, or stuck to the cup, than for the standard maneuver. The condition in which the ball was lifted displaced the subjects' gaze position the most, whereas the condition in which there was no ball caused the smallest gaze displacement. Training improved the subjects' perceptual performance. Occlusion of the magician's face did not affect the subjects' perception, suggesting that gaze misdirection does not play a strong role in the Cups and Balls illusion. Our results have implications for how to optimize the performance of this classic magic trick, and for the types of hand and object motion that maximize magic misdirection.

  20. Charged Q-ball dark matter from B and L direction

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jeong-Pyong; Kawasaki, Masahiro [Institute for Cosmic Ray Research, The University of Tokyo,5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8582 (Japan); Kavli IPMU (WPI), UTIAS, The University of Tokyo,5-1-5 Kashiwanoha, Kashiwa, 277-8583 (Japan); Yamada, Masaki [Institute for Cosmic Ray Research, The University of Tokyo,5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8582 (Japan); Kavli IPMU (WPI), UTIAS, The University of Tokyo,5-1-5 Kashiwanoha, Kashiwa, 277-8583 (Japan); Department of Physics, Tohoku University,Sendai, Miyagi 980-8578 (Japan)

    2016-08-24

    We consider nearly equal number of gauge mediation type charged (anti-) Q-balls with charge of ±α{sup −1}≃±137 well before the BBN epoch and discussed how they evolve in time. We found that ion-like objects with electric charges of +O(1) are likely to become relics in the present universe, which we expect to be the dark matter. These are constrained by MICA experiment, where the trail of heavy atom-like or ion-like object in 10{sup 9} years old ancient mica crystals is not observed. We found that the allowed region for gauge mediation model parameter and reheating temperature have to be smaller than the case of the neutral Q-ball dark matter.

  1. Charged Q-ball Dark Matter from $B$ and $L$ direction

    CERN Document Server

    Hong, Jeong-Pyong; Yamada, Masaki

    2016-01-01

    We consider nearly equal number of gauge mediation type charged (anti-) Q-balls with charge of $\\alpha^{-1}\\simeq137$ well before the BBN epoch and discussed how they evolve in time. We found that ion-like objects with electric charges of $+O(1)$ are likely to become relics in the present universe, which we expect to be the dark matter. These are constrained by MICA experiment, where the trail of heavy atom-like or ion-like object in $10^9$ years old ancient mica crystals is not observed. We found that the allowed region for gauge mediation model parameter and reheating temperature have to be smaller than the case of the neutral Q-ball dark matter.

  2. Charged Q-ball dark matter from B and L direction

    Science.gov (United States)

    Hong, Jeong-Pyong; Kawasaki, Masahiro; Yamada, Masaki

    2016-08-01

    We consider nearly equal number of gauge mediation type charged (anti-) Q-balls with charge of ±α-1 simeq ±137 well before the BBN epoch and discussed how they evolve in time. We found that ion-like objects with electric charges of +O(1) are likely to become relics in the present universe, which we expect to be the dark matter. These are constrained by MICA experiment, where the trail of heavy atom-like or ion-like object in 109 years old ancient mica crystals is not observed. We found that the allowed region for gauge mediation model parameter and reheating temperature have to be smaller than the case of the neutral Q-ball dark matter.

  3. Dust ball physics and the Schwarzschild metric

    CERN Document Server

    Kassner, Klaus

    2016-01-01

    A physics-first derivation of the Schwarzschild metric is given. Gravitation is described in terms of the effects of tidal forces (or of spacetime curvature) on the volume of a small ball of test particles (a dust ball), freely falling after all particles were at rest with respect to each other initially. The possibility to express Einstein's equation this way and some of its ramifications have been enjoyably discussed by Baez and Bunn [Am. J. Phys. 73, 644 (2005)]. Since the formulation avoids the use of tensors, neither advanced tensor calculus nor sophisticated differential geometry are needed in the calculation. The derivation is not lengthy and it has visual appeal, so it may be useful in teaching.

  4. Symmetric States on the Octonionic Bloch Ball

    Science.gov (United States)

    Graydon, Matthew

    2012-02-01

    Finite-dimensional homogeneous self-dual cones arise as natural candidates for convex sets of states and effects in a variety of approaches towards understanding the foundations of quantum theory in terms of information-theoretic concepts. The positive cone of the ten-dimensional Jordan-algebraic spin factor is one particular instantiation of such a convex set in generalized frameworks for quantum theory. We consider a projection of the regular 9-simplex onto the octonionic projective line to form a highly symmetric structure of ten octonionic quantum states on the surface of the octonionic Bloch ball. A uniform subnormalization of these ten symmetric states yields a symmetric informationally complete octonionic quantum measurement. We discuss a Quantum Bayesian reformulation of octonionic quantum formalism for the description of two-dimensional physical systems. We also describe a canonical embedding of the octonionic Bloch ball into an ambient space for states in usual complex quantum theory.

  5. Collisional and collisionless expansion of Yukawa balls.

    Science.gov (United States)

    Piel, Alexander; Goree, John A

    2013-12-01

    The expansion of Yukawa balls is studied by means of molecular dynamics simulations of collisionless and collisional situations. High computation speed was achieved by using the parallel computing power of graphics processing units. When the radius of the Yukawa ball is large compared to the shielding length, the expansion process starts with the blow-off of the outermost layer. A rarefactive wave subsequently propagates radially inward at the speed of longitudinal phonons. This mechanism is fundamentally different from Coulomb explosions, which employ a self-similar expansion of the entire system. In the collisionless limit, the outer layers carry away most of the available energy. The simulations are compared with analytical estimates. In the collisional case, the expansion process can be described by a nonlinear diffusion equation that is a special case of the porous medium equation.

  6. The Neutrino Ball Model of a Quasar

    CERN Document Server

    Manka, R; Karczewska, D

    1993-01-01

    It is suggested that the nonorthodox model of a quasar as a neutrino ball described in terms of the standard model extended by adding right-handed neutrinos and the Majorana scalar field can be presented in order to explain a quasar as a body of weak interacting neutrinos. Neutrino interaction with the scalar Majorana field violates the lepton number and produces the mass splitting of the neutrino due to the sea-saw mechanism. In this model a quasar is an object which appears in the result of the first order cosmological phase transition. In this interpretation a quasar may be regarded as a ball filled with Dirac neutrinos and can be treated as a remnant of phase transition with unbroken global lepton symmetry. In this paper we study the macroscopic parameters of such a configuration. In the result the mass-radius curve M(R) for the quasar is obtained.

  7. The squint Moon and the witch ball

    Science.gov (United States)

    Berry, M. V.

    2015-06-01

    A witch ball is a reflecting sphere of glass. Looking into the disk that it subtends, the whole sky can be seen at one glance. This feature can be exploited to see and photograph the squint Moon illusion, in which the direction normal to the illuminated face of the Moon—its ‘attitude vector’—does not appear to point towards the Sun. The images of the Sun and Moon in the disk, the geodesic connecting them, the Moon’s attitude, and the squint angle (distinct from the tilt), can be calculated and simulated, for all celestial configurations and viewing inclinations. The Moon direction antipodal to the Sun, corresponding to full Moon, is a singularity of the attitude vector field, with index +1. The main features of the witch ball images also occur in other ways of imaging the squint Moon.

  8. Effect of Changing Table Tennis Ball Material from Celluloid to Plastic on the Post-Collision Ball Trajectory

    Directory of Open Access Journals (Sweden)

    Inaba Yuki

    2017-01-01

    Full Text Available The official material used in table tennis balls was changed from celluloid to plastic, a material free of celluloid, in 2014. The purpose of this study was to understand the differences and similarities in the two types of ball materials by comparing their behavior upon collision with a table. The behavior of the balls before and after collision with a table, at various initial speeds ranging from 15 to 115 km/h, was captured using high-speed cameras. Velocities and spin rates before collision and velocities after collision were computed to calculate the coefficients of restitution and friction. Based on the computed variables, the post-collision trajectories of both balls were calculated by integrating the equation of motion of the ball for simulated service, smash and drive conditions with respect to time. The coefficients of restitution were higher for the plastic balls than the celluloid ones when the initial vertical velocities were higher. The coefficients of friction were higher for plastic balls when the initial horizontal contact point velocities were slower. Because of the differences in the material characteristics, the plastic ball trajectories of services with backspin and drives with great topspin were expected to be different from those of celluloid balls. Since the extent of differences between the two ball types varied depending on the initial conditions, testing at various initial conditions was suggested for comparing and understanding the characteristics of the balls.

  9. Low-Wear Ball-Bearing Separator

    Science.gov (United States)

    Hawkinson, Elden L.

    1991-01-01

    Proposed ball-bearing separator for use in cryogenic pump stronger and more resistant to wear. Consists of molded plastic-and-metal composite ring imbued with solid lubricant and containing embedded metal ring. Obtains combination of strength and lubricity. Before molding and machining, ring includes tooling portion for handling and indexing. Molded composite blend of PTFE and fluorinated ethylene/propylene (FEP) filled with brass and bronze powder and molybdenum disulfide powder.

  10. Capillary floating and the billiard ball problem

    OpenAIRE

    Gutkin, Eugene

    2010-01-01

    We establish a connection between capillary floating in neutral equilibrium and the billiard ball problem. This allows us to reduce the question of floating in neutral equilibrium at any orientation with a prescribed contact angle for infinite homogeneous cylinders to a question about billiard caustics for their orthogonal cross-sections. We solve the billiard problem. As an application, we characterize the possible contact angles and exhibit an infinite family of real analytic non-round cyli...

  11. CVD carbon powders modified by ball milling

    Directory of Open Access Journals (Sweden)

    Kazmierczak Tomasz

    2015-09-01

    Full Text Available Carbon powders produced using a plasma assisted chemical vapor deposition (CVD methods are an interesting subject of research. One of the most interesting methods of synthesizing these powders is using radio frequency plasma. This method, originally used in deposition of carbon films containing different sp2/sp3 ratios, also makes possible to produce carbon structures in the form of powder. Results of research related to the mechanical modification of these powders have been presented. The powders were modified using a planetary ball mill with varying parameters, such as milling speed, time, ball/powder mass ratio and additional liquids. Changes in morphology and particle sizes were measured using scanning electron microscopy and dynamic light scattering. Phase composition was analyzed using Raman spectroscopy. The influence of individual parameters on the modification outcome was estimated using statistical method. The research proved that the size of obtained powders is mostly influenced by the milling speed and the amount of balls. Powders tend to form conglomerates sized up to hundreds of micrometers. Additionally, it is possible to obtain nanopowders with the size around 100 nm. Furthermore, application of additional liquid, i.e. water in the process reduces the graphitization of the powder, which takes place during dry milling.

  12. Modeling on the Effect of Coal Loads on Kinetic Energy of Balls for Ball Mills

    Directory of Open Access Journals (Sweden)

    Yan Bai

    2015-07-01

    Full Text Available This paper presents a solution for the detection and control of coal loads that is more accurate and convenient than those currently used. To date, no research has addressed the use of a grinding medium as the controlled parameter. To improve the accuracy of the coal load detection based on the kinetic energy of balls in a tubular ball mill, a Discrete Element Method (DEM model for ball kinematics based on coal loads is proposed. The operating process for a ball mill and the ball motion, as influenced by the coal quality and the coal load, was analyzed carefully. The relationship between the operating efficiency of a coal pulverizing system, coal loads, and the balls’ kinetic energy was obtained. Origin and Matlab were utilized to draw the variation of parameters with increasing coal loads in the projectile and cascading motion states. The parameters include the balls’ real-time kinetic energy, the friction energy consumption, and the mill’s total work. Meanwhile, a method of balanced adjacent degree and a physical experiment were proposed to verify the considerable effect of the balls’ kinetic energy on coal loads. The model and experiment results indicate that a coal load control method based on the balls’ kinetic energy is therefore feasible for the optimized operation of a coal pulverizing system.

  13. Synthesis of aluminum nitride powders from a plasma-assisted ball milled precursor through carbothermal reaction

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhi-jie [Key Lab of Materials Modification (Dalian University of Technology), Ministry of Education, Dalian 116024 (China); Dai, Le-yang [Marine Engineering Institute, Jimei University, Xiamen 361021 (China); Yang, De-zheng; Wang, Sen [Key Lab of Materials Modification (Dalian University of Technology), Ministry of Education, Dalian 116024 (China); Zhang, Bao-jian [Marine Engineering Institute, Jimei University, Xiamen 361021 (China); Wang, Wen-chun, E-mail: wangwenc@dlut.edu.cn [Key Lab of Materials Modification (Dalian University of Technology), Ministry of Education, Dalian 116024 (China); Cheng, Tie-han [Pinggao Group Co. Ltd., State Grid Corporation of China, Pingdingshan 467000 (China)

    2015-01-15

    Highlights: • A novel and high efficiency synthesizing AlN powders method combining mechanical ball milling and DBDP has been developed. • The particle size, the crystallite size, the lattice distortion, the morphology of Al{sub 2}O{sub 3} powders, and the AlN conversion rate are investigated and compared under the ball milled Al{sub 2}O{sub 3} powders with DBDP and without DBDP. • The ball milled Al{sub 2}O{sub 3} powders with DBDP have small spherical structure morphology with very fine particles size and high specific surface area, which result in a higher chemical efficiency and a higher AlN conversion rate at lower thermal temperature. - Abstract: In this paper, aluminum nitride (AlN) powers have been produced with a novel and high efficiency method by thermal annealing at 1100–1600 °C of alumina (Al{sub 2}O{sub 3}) powders which were previously ball milled for various time up to 40 h with and without the assistant of dielectric barrier discharge plasma (DBDP). The ball milled Al{sub 2}O{sub 3} powders with DBDP and without DBDP and the corresponding synthesized AlN powers are characterized by X-ray diffraction, scanning electron microscope, and transmission electron microscopy. From the characteristics of the ball milled Al{sub 2}O{sub 3} powders with DBDP and without DBDP, it can be seen that the ball milled Al{sub 2}O{sub 3} powders with DBDP have small spherical structure morphology with very fine particles size and high specific surface area, which result in a higher chemical efficiency and a higher AlN conversion rate at lower thermal temperature. Meanwhile, the synthesized AlN powders can be known as hexagonal AlN with fine crystal morphology and irregular lump-like structure, and have uniform distribution with the average particle size of about between 500 nm and 1000 nm. This provides an important method for fabricating ultra fine powders and synthesizing nitrogen compounds.

  14. Aerodynamics in the classroom and at the ball park

    Science.gov (United States)

    Cross, Rod

    2012-04-01

    Experiments suitable for classroom projects or demonstrations are described concerning the aerodynamics of polystyrene balls. A light ball with sufficient backspin can curve vertically upward through the air, defying gravity and providing a dramatic visual demonstration of the Magnus effect. A ball projected with backspin can also curve downward with a vertical acceleration greater than that due to gravity if the Magnus force is negative. These effects were investigated by filming the flight of balls projected in an approximately horizontal direction so that the lift and drag forces could be easily measured. The balls were also fitted with artificial raised seams and projected with backspin toward a vertical target in order to measure the sideways deflection over a known horizontal distance. It was found that (a) a ball with a seam on one side can deflect either left or right depending on its launch speed and (b) a ball with a baseball seam can also deflect sideways even when there is no sideways component of the drag or lift forces acting on the ball. Depending on the orientations of the seam and the spin axis, a sideways force on a baseball can arise either if there is rough patch on one side of the ball or if there is a smooth patch. A scuff ball with a rough patch on one side is illegal in baseball. The effect of a smooth patch is a surprising new observation.

  15. Biomechanics of Heading a Soccer Ball: Implications for Player Safety

    Directory of Open Access Journals (Sweden)

    Charles F. Babbs

    2001-01-01

    Full Text Available To better understand the risk and safety of heading a soccer ball, the author created a set of simple mathematical models based upon Newton�s second law of motion to describe the physics of heading. These models describe the player, the ball, the flight of the ball before impact, the motion of the head and ball during impact, and the effects of all of these upon the intensity and the duration of acceleration of the head. The calculated head accelerations were compared to those during presumably safe daily activities of jumping, dancing, and head nodding and also were related to established criteria for serious head injury from the motor vehicle crash literature. The results suggest heading is usually safe but occasionally dangerous, depending on key characteristics of both the player and the ball. Safety is greatly improved when players head the ball with greater effective body mass, which is determined by a player�s size, strength, and technique. Smaller youth players, because of their lesser body mass, are more at risk of potentially dangerous headers than are adults, even when using current youth size balls. Lower ball inflation pressure reduces risk of dangerous head accelerations. Lower pressure balls also have greater “touch” and “playability”, measured in terms of contact time and contact area between foot and ball during a kick. Focus on teaching proper technique, the re-design of age-appropriate balls for young players with reduced weight and inflation pressure, and avoidance of head contact with fast, rising balls kicked at close range can substantially reduce risk of subtle brain injury in players who head soccer balls.

  16. Biomechanics of heading a soccer ball: implications for player safety.

    Science.gov (United States)

    Babbs, C F

    2001-08-08

    To better understand the risk and safety of heading a soccer ball, the author created a set of simple mathematical models based upon Newton's second law of motion to describe the physics of heading. These models describe the player, the ball, the flight of the ball before impact, the motion of the head and ball during impact, and the effects of all of these upon the intensity and the duration of acceleration of the head. The calculated head accelerations were compared to those during presumably safe daily activities of jumping, dancing, and head nodding and also were related to established criteria for serious head injury from the motor vehicle crash literature. The results suggest heading is usually safe but occasionally dangerous, depending on key characteristics of both the player and the ball. Safety is greatly improved when players head the ball with greater effective body mass, which is determined by a player"s size, strength, and technique. Smaller youth players, because of their lesser body mass, are more at risk of potentially dangerous headers than are adults, even when using current youth size balls. Lower ball inflation pressure reduces risk of dangerous head accelerations. Lower pressure balls also have greater "touch" and "playability", measured in terms of contact time and contact area between foot and ball during a kick. Focus on teaching proper technique, the re-design of age-appropriate balls for young players with reduced weight and inflation pressure, and avoidance of head contact with fast, rising balls kicked at close range can substantially reduce risk of subtle brain injury in players who head soccer balls.

  17. The methodology of composing the exercises system with fit balls.

    Directory of Open Access Journals (Sweden)

    Voronov N.P.

    2011-02-01

    Full Text Available The original methodology of composing the exercises system with fit balls was considered. More than 10 publications were analysed. On the lesson with fit balls the problem was revealed. In the experiment took part 30 students at the age from 18 till 21. All the famous exercises were systematized. As a result, a big attractiveness and assimilability of the proposed complex was revealed. The effectiveness of the complex of physical exercises with fit balls for students was proved.

  18. Multisensory perception and action in 3-ball cascade juggling

    OpenAIRE

    Sánchez García, Raúl; Hayes, S J; Williams, A M; Bennett, S. J.

    2013-01-01

    Multisensory perception and action in 3-ball cascade juggling was investigated in intermediate-skilled performers by manipulating vision (full or lower field restricted) or ball weight (equal or different). There were main effects for both independent variables but no interactions. Manipulation of ball weight had a more pervasive effect on performance outcome, as well as central tendency and dispersion of kinematic measures of the juggling action. A common finding to both manipulations was th...

  19. Following mechanical activation of salbutamol sulphate during ball-milling with isothermal calorimetry.

    Science.gov (United States)

    Gaisford, Simon; Dennison, Mansa; Tawfik, Mahmoud; Jones, Matthew D

    2010-06-30

    Formulation of actives for pulmonary delivery with dry powder inhaler devices frequently requires a particle size reduction step. The high-energy forces imparted to a material during milling, as well as reducing particle size, can cause a significant change in physicochemical properties, in particular mechanical activation of the surface (manifested as generation of amorphous regions) which can affect formulated product performance. It is not clear whether particle size reduction occurs prior to, or concomitantly with, generation of amorphous content. In this study the formation of amorphous content with time in crystalline salbutamol sulphate was quantified with isothermal gas perfusion calorimetry as the sample was ball-milled. The data showed that the most particle size reduction occurred initially (d(0.5) dropping from 12.83+/-0.4 to 4.2+/-0.4 within 5 min). During this time period, no detectable amorphous content was observed. Between 5 and 15 min milling time the particle size distribution remained relatively constant but the amorphous content increased non-linearly with time. After 20 min milling time the particle size increased slightly. The data suggest that particle size reduction occurs initially upon application of a force to the crystal. Once maximum particle size reduction has occurred the crystal absorbs the force being applied and the crystal lattice becomes disordered. After extended milling the conditions in the ball mill (heat and/or humidity) may cause crystallisation of some of the amorphous material resulting in particle-particle fusion. It would appear that the ball-milling process could be optimised to achieve the desired particle size distribution but without any loss of crystalline structure.

  20. Inferior vena cava filter thrombus: A possible cause of an unanticipated finding of {sup 99m} Tc-labeled red blood cell scintigraphy

    Energy Technology Data Exchange (ETDEWEB)

    Song, Hee Sung; Choi, Joon Hyouk; Kim, Young Suk [Jeju National University School of Medicine, Jeju (Korea, Republic of)

    2016-06-15

    {sup 99m}Tc-labeled red blood cell scintigraphy, a sensitive and specific diagnostic test, is useful for patients suspected of suffering from active gastrointestinal bleeding. This study follows a case of a patient who was suspected of gastrointestinal bleeding after an inferior vena cava filter was inserted due to a deep vein thrombosis of the femoral vein. To evaluate an exact focus of bleeding, {sup 99m}Tc-labeled red blood cell scintigraphy was executed. Herein, an unanticipated finding of {sup 99m}Tc-labeled red blood cell scintigraphy probably due to a thrombus on the inferior vena cava filter is reported.

  1. LOW COMPRESSION TENNIS BALLS AND SKILL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    John Hammond

    2006-12-01

    Full Text Available Coaching aims to improve player performance and coaches have a number of coaching methods and strategies they use to enhance this process. If new methods and ideas can be determined to improve player performance they will change coaching practices and processes. This study investigated the effects of using low compression balls (LCBs during coaching sessions with beginning tennis players. In order to assess the effectiveness of LCBs on skill learning the study employed a quasi-experimental design supported by qualitative and descriptive data. Beginner tennis players took part in coaching sessions, one group using the LCBs while the other group used standard tennis balls. Both groups were administered a skills at the beginning of a series of coaching sessions and again at the end. A statistical investigation of the difference between pre and post-test results was carried out to determine the effect of LCBs on skill learning. Additional qualitative data was obtained through interviews, video capture and the use of performance analysis of typical coaching sessions for each group. The skill test results indicated no difference in skill learning when comparing beginners using the LCBs to those using the standard balls. Coaches reported that the LCBs appeared to have a positive effect on technique development, including aspects of technique that are related to improving power of the shot. Additional benefits were that rallies went on longer and more opportunity for positive reinforcement. In order to provide a more conclusive answer to the effects of LCBs on skill learning and technique development recommendations for future research were established including a more controlled experimental environment and larger sample sizes across a longer period of time

  2. Interpolating sliding mode observer for a ball and beam system

    Science.gov (United States)

    Luai Hammadih, Mohammad; Hosani, Khalifa Al; Boiko, Igor

    2016-09-01

    A principle of interpolating sliding mode observer is introduced in this paper. The observer incorporates multiple linear observers through interpolation of multiple estimates, which is treated as a type of adaptation. The principle is then applied to the ball and beam system for observation of the slope of the beam from the measurement of the ball position. The linearised model of the ball and beam system using multiple linearisation points is developed. The observer dynamics implemented in Matlab/Simulink Real Time Workshop environment. Experiments conducted on the ball and beam experimental setup demonstrate excellent performance of the designed novel interpolating (adaptive) observer.

  3. [Diagnosis and treatment of fungal ball rhino-sinusitis].

    Science.gov (United States)

    Nie, Jun; Liu, Fenfang; Zhang, Hanwu; Li, Li

    2013-07-01

    To explore the diagnosis and treatment of the fungal ball rhino-sinusitis. The clinical data of 128 cases with the fungal ball rhino-sinusitis in our hospital between September 2005 and January 2012 were retrospectively analyzed. All patients were accepted nasal endoscopic surgery and followed up after surgery. The diagnosis were confirmed by postoperative pathological examination. The sinus of all patients epithelialized after the surgery from fourth to ninth weeks, one case recurred eight months later. Sinus CT scan and nasal endoscopy were very important to the diagnosis of the fungal ball rhino-sinusitis, and nasal endoscopic surgery is the most important treatment method to fungal ball rhino-sinusitis.

  4. CFD Analysis of Swing of Cricket Ball and Trajectory Prediction

    Science.gov (United States)

    G, Jithin; Tom, Josin; Ruishikesh, Kamat; Jose, Jyothish; Kumar, Sanjay

    2013-11-01

    This work aims to understand the aerodynamics associated with the flight and swing of a cricket ball and predict its flight trajectory over the course of the game: at start (smooth ball) and as the game progresses (rough ball). Asymmetric airflow over the ball due to seam orientation and surface roughness can cause flight deviation (swing). The values of Drag, Lift and Side forces which are crucial for determining the trajectory of the ball were found with the help of FLUENT using the standard K- ɛ model. Analysis was done to study how the ball velocity, spin imparted to be ball and the tilt of the seam affects the movement of the ball through air. The governing force balance equations in 3 dimensions in combination a MATLAB code which used Heun's method was used for obtaining the trajectory of the ball. The conditions for the conventional swing and reverse swing to occur were deduced from the analysis and found to be in alignment with the real life situation. Critical seam angle for maximum swing and transition speed for normal to reverse swing were found out. The obtained trajectories were compared to real life hawk eye trajectories for validation. The analysis results were in good agreement with the real life situation.

  5. Structural evolution of ball-milled permalloy

    Energy Technology Data Exchange (ETDEWEB)

    Brzozka, K., E-mail: kbrzozka@poczta.f [Technical University, Department of Physics (Poland); Oleksakova, D.; Kollar, P. [P.J. Safarik University, Department of Condensed Matter Physics, Institute of Physics, Faculty of Science (Slovakia); Szumiata, T.; Gorka, B.; Gawronski, M. [Technical University, Department of Physics (Poland)

    2006-02-15

    Two series of Fe{sub 19.8}Ni{sub 80.2} samples obtained by ball milling and differing in the form of starting material were investigated by Moessbauer spectroscopy. In the case of milled elemental powder, strong structural evolution was stated: both {alpha} and {gamma} phases arise and a small amount of pure iron is present as well. The annealing of as-milled powder at 490{sup o}C causes faster forming of {gamma}-(Ni-Fe) phase. Only slight changes in atomic order were stated in the series of milled polycrystalline ribbon.

  6. Quenching simulation of steel grinding balls

    Energy Technology Data Exchange (ETDEWEB)

    Zapata-Hernandez, O.; Reyes, L. A.; Camurri, C.; Carrasco, C.; Garza-Monte-de-Oca, F.; Colas, R.

    2015-07-01

    The phase transformations of high carbon steel during quenching and equalizing were modelled using commercial computer packages based on the finite element method and the kinetic transformation of steel. The model was used to predict the temperature and microstructural changes taking place within balls of two different sizes that are used for grinding mineral ores. A good correlation between the temperatures measured by inserted thermocouples and those predicted by the model was obtained after modifying the thermal conductivity of the steel within the temperature domain at which mixed phases are present. The phase transformations predicted were confirmed by metallographic analyses. (Author)

  7. Capillary floating and the billiard ball problem

    CERN Document Server

    Gutkin, Eugene

    2010-01-01

    We establish a connection between capillary floating in neutral equilibrium and the billiard ball problem. This allows us to reduce the question of floating in neutral equilibrium at any orientation with a prescribed contact angle for infinite homogeneous cylinders to a question about billiard caustics for their orthogonal cross-sections. We solve the billiard problem. As an application, we characterize the possible contact angles and exhibit an infinite family of real analytic non-round cylinders that float in neutral equilibrium at any orientation with constant contact angles.

  8. Observation of Lightning Ball (Ball Lightning): A new phenomenological description of the phenomenon

    CERN Document Server

    Tar, Domokos

    2009-01-01

    The author (physicist)has observed the very strange,beautiful and frightening Lightning Ball (LB). He has never forgotten this phenomenon. During his working life he could not devote himself to the problem of LB-formation.Only two years ago as he has been reading different unbelievable models of LB-formation, he decided to work on this problem. By studying the literature and the crucial points of his observation the author succeeded in creating a completely new model of Lightning Ball(LB) and Ball Lightning(BL)-formation based on the symmetry breaking of the hydrodynamic vortex ring.This agrees fully with the observation and overcomes the shortcomings of current models of LB formation. This model provides answers to the questions: Why are LBs so rarely observed,why do BLs in rare cases have such a high energy and how can we generate LB in the laboratory? Moreover the author differentiates between LB and BL, the latter having a high energy and occuring in 5 % of the observations. Keywords: ball lightning, hydr...

  9. The information for catching fly balls : Judging and intercepting virtual balls in a CAVE

    NARCIS (Netherlands)

    Zaal, FTJM; Michaels, CF

    2003-01-01

    Visually guided action implies the existence of information as well as a control law relating that information to movement. For ball catching, the Chapman Strategy-keeping constant the rate of change of the tangent of the elevation angle (d(tan(alpha))/dt)-leads a catcher to the right location at th

  10. Memory in random bouncing ball dynamics

    Science.gov (United States)

    Zouabi, C.; Scheibert, J.; Perret-Liaudet, J.

    2016-09-01

    The bouncing of an inelastic ball on a vibrating plate is a popular model used in various fields, from granular gases to nanometer-sized mechanical contacts. For random plate motion, so far, the model has been studied using Poincaré maps in which the excitation by the plate at successive bounces is assumed to be a discrete Markovian (memoryless) process. Here, we investigate numerically the behaviour of the model for continuous random excitations with tunable correlation time. We show that the system dynamics are controlled by the ratio of the Markovian mean flight time of the ball and the mean time between successive peaks in the motion of the exciting plate. When this ratio, which depends on the bandwidth of the excitation signal, exceeds a certain value, the Markovian approach is appropriate; below, memory of preceding excitations arises, leading to a significant decrease of the jump duration; at the smallest values of the ratio, chattering occurs. Overall, our results open the way for uses of the model in the low-excitation regime, which is still poorly understood.

  11. Crises in a dissipative bouncing ball model

    Energy Technology Data Exchange (ETDEWEB)

    Livorati, André L.P., E-mail: livorati@usp.br [Departamento de Física, UNESP, Universidade Estadual Paulista, Av. 24A, 1515, Bela Vista, 13506-900, Rio Claro, SP (Brazil); School of Mathematics, University of Bristol, Bristol, BS8 1TW (United Kingdom); Instituto de Física, IFUSP, Universidade de São Paulo, USP, Rua do Matão, Tr.R 187, Cidade Universitária, 05314-970, São Paulo, SP (Brazil); Caldas, Iberê L. [Instituto de Física, IFUSP, Universidade de São Paulo, USP, Rua do Matão, Tr.R 187, Cidade Universitária, 05314-970, São Paulo, SP (Brazil); Dettmann, Carl P. [School of Mathematics, University of Bristol, Bristol, BS8 1TW (United Kingdom); Leonel, Edson D. [Departamento de Física, UNESP, Universidade Estadual Paulista, Av. 24A, 1515, Bela Vista, 13506-900, Rio Claro, SP (Brazil)

    2015-11-06

    Highlights: • We studied a dissipative bouncing ball dynamics. • A two-dimensional nonlinear mapping describes the dynamics. • Crises between attractors and its manifolds were characterized. • A new physical crisis between vibrating platform and an attractor was characterized. • The existence of a ‘robust’ chaotic attractor was set. - Abstract: The dynamics of a bouncing ball model under the influence of dissipation is investigated by using a two-dimensional nonlinear mapping. When high dissipation is considered, the dynamics evolves to different attractors. The evolution of the basins of the attracting fixed points is characterized, as we vary the control parameters. Crises between the attractors and their boundaries are observed. We found that the multiple attractors are intertwined, and when the boundary crisis between their stable and unstable manifolds occurs, it creates a successive mechanism of destruction for all attractors originated by the sinks. Also, a physical impact crisis is described, an important mechanism in the reduction of the number of attractors.

  12. Memory in random bouncing ball dynamics

    CERN Document Server

    Zouabi, C; Perret-Liaudet, J

    2016-01-01

    The bouncing of an inelastic ball on a vibrating plate is a popular model used in various fields, from granular gases to nanometer-sized mechanical contacts. For random plate motion, so far, the model has been studied using Poincar{\\'e} maps in which the excitation by the plate at successive bounces is assumed to be a discrete Markovian (memoryless) process. Here, we investigate numerically the behaviour of the model for continuous random excitations with tunable correlation time. We show that the system's dynamics are controlled by the ratio of the Markovian mean flight time of the ball and the mean time between successive peaks in the motion of the exciting plate. When this ratio, which depends on the bandwidth of the excitation signal, exceeds a certain value, the Markovian approach is appropriate; below, memory of preceding excitations arises, leading to a significant decrease of the jump duration; at the smallest values of the ratio, chattering occurs. Overall, our results open the way for uses of the mo...

  13. Relative locality and the soccer ball problem

    CERN Document Server

    Amelino-Camelia, Giovanni; Kowalski-Glikman, Jerzy; Smolin, Lee

    2011-01-01

    We consider the behavior of macroscopic bodies within the framework of relative locality, which is a recent proposal for Planck scale modifications of the relativistic dynamics of particles which are described as arising from deformations in the geometry of momentum space. These lead to the addition of non-linear terms to the energy-momentum relations and conservation laws, which are suppressed by powers of ratio between the energy E of the particles involved and the Planck mass M_P. We consider and resolve a common objection against such proposals, which is that, even if the corrections are small for elementary particles in current experiments, they are huge when applied to composite systems such as soccer balls, planets and stars, with energies E_{macro} much larger than M_P. We show that this "soccer-ball problem" does not arise within the framework of relative locality, because the non-linear effects for the dynamics of a composite system with N elementary particles appear at most of order E_{macro}/ N M_...

  14. A Machine Vision System for Ball Grid Array Package Inspection

    Institute of Scientific and Technical Information of China (English)

    XIA Nian-jiong; CAO Qi-xin; LEE Jey

    2005-01-01

    An optical inspection method of the Ball Grid Array package (BGA) was proposed by using a machine vision system. The developed machine vision system could get main critical factors for BGA quality evaluation, such as the height of solder ball, diameter, pitch and coplanarity. The experiment has proved that this system is available for BGA failure detection.

  15. How Magnus Bends the Flying Ball - Experimenting and Modeling

    Science.gov (United States)

    Timková, V.; Ješková, Z.

    2017-02-01

    Students are well aware of the effect of the deflection of sports balls when they have been given a spin. A volleyball, tennis, or table tennis ball served with topspin results in an additional downward force that makes the ball difficult to catch and return. In soccer, the effect of sidespin causes the ball to curve unexpectedly sideways, resulting in a so-called banana kick that can confuse the goalkeeper. These surprising effects attract students' attention such that the motion of sports balls can be used to capture the interest of students towards the physics behind it. However, to study and analyze the motion of a real ball kicked in a playfield is not an easy task. Instead of the large-scale full-size sports ball motion, there can be designed and studied simpler experiments that can be carried out in the classroom. Moreover, digital technologies that are available at schools enable students to collect data from the experiment easily in a reasonable time. The mathematical model based on the analysis of forces acting on the ball flying in the air can be used to simulate the motion in order to understand the basic physical principles of the motion so that the best correspondence may be found.

  16. Launch Creativity with Ping-Pong Ball Challenge

    Science.gov (United States)

    Kornoelje, Joanne; Roman, Harry T.

    2011-01-01

    Educators at Thomas A. Edison Middle School have worked together to bring invention information and activities to life. One activity in particular, Ping-Pong Ball Invention Challenge, has proven a great success. The Ping-Pong Ball Invention Challenge was inspired by the basic rules for PBS's "Design Squad"'s "Pop Fly" activity. In this article,…

  17. Segmented ball valve is easy to open and close

    Science.gov (United States)

    Prono, E.; Shinault, L. H.; Speisman, C.

    1966-01-01

    Segmented ball valve and flowmeter in the same spherical housing provide a valve that will handle large fluid volume without bulkiness and weight of blade valves or conventional ball valves. The valve is easily opened or closed and the flowmeter remains stationary, so errors are eliminated.

  18. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in millim

  19. Physical Activity Benefits Creativity: Squeezing a Ball for Enhancing Creativity

    Science.gov (United States)

    Kim, JongHan

    2015-01-01

    Studies in embodied cognition show that physical sensations, such as touch and movement, influence cognitive processes. Two studies were conducted to test whether squeezing a soft versus a hard ball facilitates different types of creativity. Squeezing a malleable ball would increase divergent creativity by catalyzing multiple or alternative ideas,…

  20. DUAL BASES FOR A NEW FAMILY OF GENERALIZED BALL BASES

    Institute of Scientific and Technical Information of China (English)

    Hong-yiWu

    2004-01-01

    This paper presents the dual bases for a new family of generalized Ball curves with a position parameter K, which includes the Bezier curve, generalized Said-Ball curve and some intermediate curves. Using the dual bases, the relative Marsden identity, conversion formulas of bases and control points of various curves are obtained.

  1. Exact solutions, energy, and charge of stable Q-balls

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Marques, M.A. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil); Menezes, R. [Universidade Federal da Paraiba, Departamento de Ciencias Exatas, Rio Tinto, PB (Brazil); Universidade Federal de Campina Grande, Departamento de Fisica, Campina Grande, PB (Brazil)

    2016-05-15

    In this work we deal with nontopological solutions of the Q-ball type in two spacetime dimensions. We study models of current interest, described by a Higgs-like and other, similar potentials which unveil the presence of exact solutions. We use the analytic results to investigate how to control the energy and charge to make the Q-balls stable. (orig.)

  2. Improved hydrogen sorption kinetics in wet ball milled Mg hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Li

    2011-05-04

    In this work, wet ball milling method is used in order to improve hydrogen sorption behaviour due to its improved microstructure of solid hydrogen materials. Compared to traditional ball milling method, wet ball milling has benefits on improvement of MgH{sub 2} microstructure and further influences on its hydrogen sorption behavior. With the help of solvent tetrahydrofuran (THF), wet ball milled MgH{sub 2} powder has much smaller particle size and its specific surface area is 7 times as large as that of dry ball milled MgH{sub 2} powder. Although after ball milling the grain size is decreased a lot compared to as-received MgH{sub 2} powder, the grain size of wet ball milled MgH{sub 2} powder is larger than that of dry ball milled MgH{sub 2} powder due to the lubricant effect of solvent THF during wet ball milling. The improved particle size and specific surface area of wet ball milled MgH{sub 2} powder is found to be determining its hydrogen sorption kinetics especially at relatively low temperatures. And it also shows good cycling sorption behavior, which decides on its industrial applicability. With three different catalysts MgH{sub 2} powder shows improved hydrogen sorption behavior as well as the cyclic sorption behavior. Among them, the Nb{sub 2}O{sub 5} catalyst is found to be the most effective one in this work. Compared to the wet ball milled MgH{sub 2} powder, the particle size and specific surface area of the MgH{sub 2} powder with catalysts are similar to the previous ones, while the grain size of the MgH{sub 2} with catalysts is much finer. In this case, two reasons for hydrogen sorption improvement are suggested: one is the reduction of the grain size. The other may be as pointed out in some literatures that formation of new oxidation could enhance the hydrogen sorption kinetics, which is also the reason why its hydrogen capacity is decreased compared to without catalysts. After further ball milling, the specific surface area of wet ball milled Mg

  3. Ball Screw Actuator Including an Axial Soft Stop

    Science.gov (United States)

    Wingett, Paul T. (Inventor); Forrest, Steven Talbert (Inventor); Abel, Steve (Inventor); Woessner, George (Inventor); Hanlon, Casey (Inventor)

    2016-01-01

    An actuator includes an actuator housing, a ball screw, and an axial soft stop assembly. The ball screw extends through the actuator housing and has a first end and a second end. The ball screw is coupled to receive a drive force and is configured, upon receipt of the drive force, to selectively move in a retract direction and an extend direction. The axial soft stop assembly is disposed within the actuator housing. The axial soft stop assembly is configured to be selectively engaged by the ball screw and, upon being engaged thereby, to translate, with compliance, a predetermined distance in the extend direction, and to prevent further movement of the ball screw upon translating the predetermined distance.

  4. Effectiveness during ball screens in elite basketball games.

    Science.gov (United States)

    Gómez, Miguel-Ángel; Battaglia, Otavio; Lorenzo, Alberto; Lorenzo, Jorge; Jiménez, Sergio; Sampaio, Jaime

    2015-01-01

    Ball screens are one of the most frequently used tactical behaviour in elite basketball games. The aim of the present study was to identify their predictors of success related to time, space, players, and tasks performed. The sample was composed of 818 ball screens corresponding to 20 close games (mean differences in score of 3.1 ± 0.8 points) randomly selected from the playoff games of the Spanish Basketball League (2008-2011). Classification tree analysis (CHAID) was used to analyse which variable or combination of variables, better predicts effectiveness during ball screens. The main results allowed identifying interactions with dribbler actions after the screen and the orientation of the screen on the ball. The results showed no interaction with game quarter and quarter minute temporal-related variables in both analyses. The present findings allow improving coaches' strategic plans that involve selecting the most appropriate offensive approach when performing ball screens.

  5. Une balle blanche dans un roman noir

    Directory of Open Access Journals (Sweden)

    Sophie Vallas

    2012-03-01

    Full Text Available En 1982, Paul Auster fit paraître, sous le pseudonyme de Paul Benjamin, un roman noir intitulé Squeeze Play. Ce roman présente la particularité d’appartenir également au genre du baseball novel, l’intrigue se déroulant en partie dans le monde du base-ball et sa résolution intervenant grâce à une manœuvre rare et spectaculaire (un double suicide squeeze qui éclaire l’enquête sous un jour nouveau. Cet article se propose d’analyser la place du base-ball dans Squeeze Play : élément essentiel de la structuration du roman, le base-ball permet également à Auster d’étudier le mythe du héros américain déchu dans une société dont toutes les dimensions (sportive, politique, privée sont gangrenées par la corruption et la perversion. La relation particulière qu’Auster tisse entre roman noir et baseball novel est également étudiée.In 1982 Paul Auster published a roman noir entitled Squeeze Play under the pseudonym of Paul Benjamin. The novel is also a “baseball novel”: its plot essentially deals with a baseball New York team and its former, fallen star, and the final resolution of the mystery intervenes thanks to a revelation brought by a baseball game in which a rather rare and spectacular maneuver (the double suicide squeeze is used by one of the teams to turn the tables and win the game. This paper analyzes the place of baseball in Squeeze Play: it first appears as an essential element in the very structure of the plot, but it is also, for Auster, a way of questioning the myth of the hero in an American society whose main aspects (sports, politics, private life are eaten up by corruption and perversion. The links Auster establishes between roman noir and baseball novel are also dealt with.

  6. Accuracy and Reliability of a New Tennis Ball Machine

    Directory of Open Access Journals (Sweden)

    Cyril Brechbuhl, Grégoire Millet, Laurent Schmitt

    2016-06-01

    Full Text Available The aim was to evaluate the reliability of a newly-developed ball machine named 'Hightof', on the field and to assess its accuracy. The experiment was conducted in the collaboration of the 'Hawk-Eye' technology. The accuracy and reliability of this ball machine were assessed during an incremental test, with 1 min of exercise and 30 sec of recovery, where the frequency of the balls increased from 10 to 30 balls·min-1. The initial frequency was 10 and increased by 2 until 22, then by 1 until 30 balls·min-1. The reference points for the impact were 8.39m from the net and 2.70m from lateral line for the right side and 2.83m for the left side. The precision of the machine was similar on the right and left sides (0.63 ± 0.39 vs 0.63 ± 0.34 m. The distances to the reference point were 0.52 ± 0.42, 0.26 ± 0.19, 0.52 ± 0.37, 0.28 ± 0.19 m for the Y-right, X-right, Y-left and X-left impacts. The precision was constant and did not increase with the intensity. (e.g ball frequency. The ball velocity was 86.3 ± 1.5 and 86.5 ± 1.3 km·h-1 for the right and the left side, respectively. The coefficient of variation for the velocity ranged between 1 and 2% in all stages (ball velocity ranging from 10 to 30 balls·min-1. Conclusion: both the accuracy and the reliability of this new ball machine appear satisfying enough for field testing and training.

  7. A Theoretical Analysis of Ball Spinning

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    As a special method of manufacturing thin wall tubes, the ball spinning process has been used for nearly 30 years because of its less investment of equipment, higher precision, and more perfect properties of products. However, the application is limited since the process parameters are determined based on empirical data and laboratory experiments for lack of a whole theoretical analysis. In this paper, some basic parameters such as the force and power parameters have been studied based on an analysis of geometry and mechanics of the process. The calculation of forming forces and the selection of the working angle are carried out. At the end, a perfect comparison between the results of the experiments and the theoretical analysis is made.

  8. Hot balls splash and sink fast

    Science.gov (United States)

    Marston, Jeremy; Vakarelski, Ivan; Thoroddsen, Sigurdur; Chan, Derek

    2011-11-01

    When a heated sphere is immersed in a liquid, we induce an inverted Leidenfrost effect whereby the sphere is wrapped in a vapour jacket which protects it from physical contact with the liquid and, when released to fall freely in the liquid, the sphere's terminal velocity can increase dramatically compared to a cold ball. This Leidenfrost-induced vapour layer can lead to significant drag reduction by up to 85% which appears to be the limiting case for drag reduction techniques based on gas layer injection. In a related experiment, when the heated sphere is released from above the surface, the dynamics of the entry are significantly different from the cold case, resulting in a prompt splash and cavity formation. We propose that this experiment is the ultimate non-wetting scenario during water-entry problems.

  9. Upper Pennsylvanian Steubenville coal-ball flora

    Energy Technology Data Exchange (ETDEWEB)

    Rothwell, G.W.

    1988-03-01

    The Upper Pennsylvanian (Conemaugh Group) Duquesne Coal west of Steubenville, Ohio represents a deltaic peat-accumulating swamp, and is one the best known of coal swamp floras. In a few places, the peat was infiltrated and permineralized by calcium carbonate prior to coalification, thus producing coal balls in which both morphological and anatomical structure of the constituent plant parts are preserved. The plant material represents primarily the community that inhabited the peat-accumulating environment, but some remains from near-swamp environments also are represented. The flora is relatively diverse, consisting of over 55 megafossil taxa of isolated organs that were produced by at least 25 species of plants. All five major groups of Pennsylvanian coal-swamp plants (i.e. Lycopsida, Sphenopsida, Pteridopsida, Pteridospermopsida and Cordaitales) are represented. 31 refs., 2 figs.

  10. Research concerning the Ball Screen in Basketball

    Directory of Open Access Journals (Sweden)

    Dan Ionescu

    2017-03-01

    Full Text Available The dynamics of basketball, due to the relatively small court but also to regulations concerning the time of attack, has required finding, by the specialists in this field, new ways of collaboration and specific actions between a certain team’s players. Thus has appeared the 2 on 2 play, with its improved version called pick and roll, which has ”exploded” over the last years, becoming the most important element in many coaches’ strategy. As a description, pick and roll represents the tactic move to which participate the player in possession of the ball and a tall player, which screen him out, temporarily blocking the way of its defender. The purpose of this research is analyzing, in a national champion team, the frequency, the versions and the efficiency of these tactic moves.

  11. Tracking of Ball and Players in Beach Volleyball Videos

    Science.gov (United States)

    Gomez, Gabriel; Herrera López, Patricia; Link, Daniel; Eskofier, Bjoern

    2014-01-01

    This paper presents methods for the determination of players' positions and contact time points by tracking the players and the ball in beach volleyball videos. Two player tracking methods are compared, a classical particle filter and a rigid grid integral histogram tracker. Due to mutual occlusion of the players and the camera perspective, results are best for the front players, with 74,6% and 82,6% of correctly tracked frames for the particle method and the integral histogram method, respectively. Results suggest an improved robustness against player confusion between different particle sets when tracking with a rigid grid approach. Faster processing and less player confusions make this method superior to the classical particle filter. Two different ball tracking methods are used that detect ball candidates from movement difference images using a background subtraction algorithm. Ball trajectories are estimated and interpolated from parabolic flight equations. The tracking accuracy of the ball is 54,2% for the trajectory growth method and 42,1% for the Hough line detection method. Tracking results of over 90% from the literature could not be confirmed. Ball contact frames were estimated from parabolic trajectory intersection, resulting in 48,9% of correctly estimated ball contact points. PMID:25426936

  12. Effects of using the simplified airway risk index vs usual airway assessment on unanticipated difficult tracheal intubation - a cluster randomized trial with 64,273 participants

    DEFF Research Database (Denmark)

    Nørskov, A K; Wetterslev, J; Rosenstock, C V

    2016-01-01

    ' heterogeneous individual airway assessments. Preoperative prediction of difficult intubation and actual intubation difficulties were registered in the Danish Anaesthesia Database for both groups. Patients who were preoperatively scheduled for intubation by advanced techniques (e.g. video laryngoscopy; flexible......BACKGROUND: Unanticipated difficult intubation remains a challenge in anaesthesia. The Simplified Airway Risk Index (SARI) is a multivariable risk model consisting of seven independent risk factors for difficult intubation. Our aim was to compare preoperative airway assessment based on the SARI...... with usual airway assessment. METHODS: From 01.10.2012 to 31.12.2013, 28 departments were cluster-randomized to apply the SARI model or usual airway assessment. The SARI group implemented the SARI model. The Non-SARI group continued usual airway assessment, thus reflecting a group of anaesthetists...

  13. Unanticipated difficult airway management in anaesthetised patients: a prospective study of the effect of mannequin training on management strategies and skill retention.

    Science.gov (United States)

    Kuduvalli, P M; Jervis, A; Tighe, S Q M; Robin, N M

    2008-04-01

    This prospective study on a medium-fidelity simulator (SimMan, Laerdal Medical Corporation, Wappingers Falls, NY, USA) examined the management of unanticipated difficult airway by 21 anaesthetists and the effect of training in this context. There were two scenarios investigated: 'cannot intubate, can ventilate' (CI) and 'cannot intubate, cannot ventilate' (CICV). Following initial evaluation, volunteers underwent training in the 'Difficult Airway Society' (DAS) algorithms and associated technical skills. At 6-8 weeks and 6-8 months, performance was compared with the initial evaluation. There was a more structured approach following training (p mask airway increased following training (p = 0.021). This was sustained over time (p = 0.01). In both scenarios there was a reduced incidence of equipment misuse (p training significantly improves performance for at least 6-8 weeks. Training should be repeated at intervals of 6 months or less.

  14. The Unanticipated Benefits of Behavioral Assessments and Interviews on Anxiety, Self-Esteem and Depression Among Women Engaging in Transactional Sex.

    Science.gov (United States)

    Gunn, Jayleen K L; Roth, Alexis M; Center, Katherine E; Wiehe, Sarah E

    2016-11-01

    Women engaging in transactional sex have disproportional mental health co-morbidity and face substantial barriers to accessing social services. We hypothesized that participation in a longitudinal research study, with no overt intervention, would lead to short-term mental health improvements. For 4-weeks, 24 women disclosed information about their lives via twice daily cell-phone diaries and weekly interviews. We used t tests to compare self-esteem, anxiety, and depression at baseline and exit. Tests were repeated for hypothesized effect modifiers (e.g., substance abuse severity; age of sex work debut). For particularly vulnerable women (e.g., less educated, histories of abuse, younger initiation of sex work) participation in research conferred unanticipated mental health benefits. Positive interactions with researchers, as well as discussing lived experiences, may explain these effects. Additional studies are needed to confirm findings and identify mechanisms of change. This work contributes to the growing body of literature documenting that study participation improves mental health.

  15. Numerical study of Q-ball formation in gravity mediation

    Energy Technology Data Exchange (ETDEWEB)

    Hiramatsu, Takashi; Kawasaki, Masahiro [Institute for Cosmic Ray Research, The University of Tokyo, Kashiwa, Chiba 277-8582 (Japan); Takahashi, Fuminobu, E-mail: hiramatz@icrr.u-tokyo.ac.jp, E-mail: kawasaki@icrr.u-tokyo.ac.jp, E-mail: fuminobu.takahashi@ipmu.jp [Institute for the Physics and Mathematics of the universe, The University of Tokyo, Kashiwa, Chiba 277-8568 (Japan)

    2010-06-01

    We study Q-ball formation in the expanding universe on 1D, 2D and 3D lattice simulations. We obtain detailed Q-ball charge distributions, and find that the distribution is peaked at Q{sup 3D}{sub peak} ≅ 1.9 × 10{sup −2}(|Φ{sub in}|/m){sup 2}, which is greater than the existing result by about 60%. Based on the numerical simulations, we discuss how the Q-ball formation proceeds. Also we make a comment on possible deviation of the charge distributions from what was conjectured in the past.

  16. [Locator or ball attachment: a guide for clinical decision making].

    Science.gov (United States)

    Büttel, Adrian E; Bühler, Nico M; Marinello, Carlo P

    2009-01-01

    Various attachments are available to retain overdentures on natural roots or implants. Technical aspects, the clinical handling, the capability to adapt or repair and the costs are parameters to be considered when choosing the appropriate attachment. Ball attachments and bars are clinically established and well documented. Ball attachments as prefabricated, unsplinted units are easily replaceable and show hygienic advantages, while bars show favorable stability. The Locator is a newer, popular clinical alternative to these established attachments. The ball attachment and the Locator are compared from a technical and clinical point of view.

  17. Training simulator for teaching a technique to the long transmission of ball in basket-ball by a method by an arcuated hand from above with threaten

    Directory of Open Access Journals (Sweden)

    Charikova K.M.

    2012-03-01

    Full Text Available Technical devices which used in basket-ball are considered. The features of constructing of trainers and method of their application are selected in a training process. A trainer is offered for teaching a technique to the long transmission of ball in basket-ball. A trainer is a moving on a rope imitator of basket-ball ball. This construction allows to design initial position, замах for implementation of transmission and line of acceleration of ball in the final phase of motion. The method of the use of trainer is developed in an educational process.

  18. Great (Flame) Balls of Fire! Structure of Flame Balls at Low Lewis-number-2 (SOFBALL-2)

    Science.gov (United States)

    Ronney, Paul; Weiland, Karen J.; Over, Ann (Technical Monitor)

    2002-01-01

    Everyone knows that an automobile engine wastes fuel and energy when it runs with a fuel-rich mixture. 'Lean' burning, mixing in more air and less fuel, is better for the environment. But lean mixtures also lead to engine misfiring and rough operation. No one knows the ultimate limits for lean operation, for 'weak' combustion that is friendly to the environment while still moving us around. This is where the accidental verification of a decades-old prediction may have strong implications for designing and running low-emissions engines in the 21st century. In 1944, Soviet physicist Yakov Zeldovich predicted that stationary, spherical flames are possible under limited conditions in lean fuel-air mixtures. Dr. Paul Ronney of the University of Southern California accidentally discovered such 'flame balls' in experiments with lean hydrogen-air mixtures in 1984 during drop-tower experiments that provided just 2.2 seconds of near weightlessness. Experiments aboard NASA's low-g aircraft confirmed the results, but a thorough investigation was hampered by the aircraft's bumpy ride. And stable flame balls can only exist in microgravity. The potential for investigating combustion at the limits of flammability, and the implications for spacecraft fire safety, led to the Structure of Flame Balls at Low Lewis-number (SOFBALL) experiment flown twice aboard the Space Shuttle on the Microgravity Sciences Laboratory-1 (MSL-1) in 1997. Success there led to the planned reflight on STS-107. Flame balls are the weakest fires yet produced in space or on Earth. Typically each flame ball produced only 1 watt of thermal power. By comparison, a birthday candle produces 50 watts. The Lewis-number measures the rate of diffusion of fuel into the flame ball relative to the rate of diffusion of heat away from the flame ball. Lewis-number mixtures conduct heat poorly. Hydrogen and methane are the only fuels that provide low enough Lewis-numbers to produce stable flame balls, and even then only for

  19. Transversal stability of the bouncing ball on a concave surface

    Science.gov (United States)

    Chastaing, J.-Y.; Pillet, G.; Taberlet, N.; Géminard, J.-C.

    2015-05-01

    A ball bouncing repeatedly on a vertically vibrating surface constitutes the famous "bouncing ball" problem, a nonlinear system used in the 1980s, and still in use nowadays, to illustrate the route to chaos by period doubling. In experiments, in order to avoid the ball escape that would be inevitable with a flat surface, a concave lens is often used to limit the horizontal motion. However, we observe experimentally that the system is not stable. The ball departs from the system axis and exhibits a pendular motion in the permanent regime. We propose theoretical arguments to account for the decrease of the growth rate and of the asymptotic-size of the trajectory when the frequency of the vibration is increased. The instability is very sensitive to the physics of the contacts, which makes it a potentially interesting way to study the collisions rules, or to test the laws used in numerical studies of granular matter.

  20. 'Heading' Soccer Ball Not Smart for The Brain

    Science.gov (United States)

    ... news/fullstory_163363.html 'Heading' Soccer Ball Not Smart for the Brain It's tied to higher concussion ... Albert Einstein College of Medicine in New York City, said in a college news release. "But our ...

  1. AN INNOVATIVE METHOD FOR FORMING BALLS FROM SCRAP RAIL HEADS

    Directory of Open Access Journals (Sweden)

    Zbigniew Pater

    2016-09-01

    Full Text Available The paper describes a new method for forming grinding media balls from scrap rail heads. This forming method involves the following operations: cutting the rail head to the desired length combined with lateral pressing of the produced workpiece; flashless die forging and sizing of balls in a helical impression. The proposed method was verified by numerical simulation which involved the modeling of a forming process for producing 80 mm diameter balls. As a result of the modeling, it was possible to examine the changes in the workpiece shape during each forming operation, the variations in loads and torques, as well as the distribution of temperatures enabling performing another forming operation, i.e. quenching. The results confirm that the designed method can be used to produce balls.

  2. Rock Characteristics and Ball Mill Energy Requirements at ...

    African Journals Online (AJOL)

    Michael

    2015-06-01

    Jun 1, 2015 ... Goldfields Ghana Limited, Tarkwa Gold Mine (TGM), processes ores which occur in conglomerate ... effect of changes in rock characteristics on the performance of the existing ball mill. ..... feldspars, iron oxides and sulphides.

  3. Confining rigid balls by mimicking quadrupole ion trapping

    CERN Document Server

    Fan, Wenkai; Wang, Sihui; Zhou, Huijun

    2016-01-01

    The rotating saddle not only is an interesting system that is able to trap a ball near its saddle point, but can also intuitively illustrate the operating principles of quadrupole ion traps in modern physics. Unlike the conventional models based on the mass-point approximation, we study the stability of a ball in a rotating-saddle trap using rigid-body dynamics. The stabilization condition of the system is theoretically derived and subsequently verified by experiments. The results are compared with the previous mass-point model, giving large discrepancy as the curvature of the ball is comparable to that of the saddle. We also point out that the spin angular velocity of the ball is analogous to the cyclotron frequency of ions in an external magnetic field utilized in many prevailing ion-trapping schemes.

  4. The motion of a ball moving down a circular path

    Science.gov (United States)

    de Souza, Diego C.; Coluci, Vitor R.

    2017-02-01

    The problem of a body slipping down a frictionless hemisphere is very common in physics and engineering textbooks. In this type of problem, students are normally asked to find the angle at which the body flies off the surface. In this work, we have constructed an apparatus to determine the angle at which a ball flies off a circular track, and to study the motion of the ball (rolling and slipping) along the surface. The apparatus is comprised of two parallel rails that form a quarter circle. The angular position and velocity of a steel ball are measured using a moveable arm equipped with a photodetector. Two methods are used to determine the angle the ball loses contact with the track. Both methods provide values in agreement with a model for rolling followed by slipping.

  5. Application of the Blobo bluetooth ball in wrist rehabilitation training

    National Research Council Canada - National Science Library

    WEI-MIN HSIEH; YUH-SHYAN HWANG; SHIH-CHING CHEN; SUN-YEN TAN; CHIH-CHEN CHEN; YU-LUEN CHEN

    2016-01-01

    Abstract. [Purpose] The introduction of emerging technologies such as the wireless Blobo bluetooth ball with multimedia features can enhance wrist physical therapy training, making it more fun and enhancing its effects. [Methods...

  6. The physics of juggling a spinning ping-pong ball

    Science.gov (United States)

    Widenhorn, Ralf

    2016-12-01

    Juggling a spinning ball with a ping-pong paddle represents a challenge both in terms of hand-eye coordination and physics concepts. Here, we analyze the ping-pong ball's motion, and explore how the correct paddle angle relates to the ball's spin and speed, as it moves vertically up and down. For students, this requires engaging with concepts like momentum, angular momentum, free-body diagrams, and friction. The activities described in this article include high-speed video motion tracking of the ping-pong ball and the investigation of the frictional characteristics of the paddle. They can be done in a physics lab or at home, requiring only inexpensive or commonly used equipment, and can be undertaken by high school or college students.

  7. Nonlinear dynamic behaviors of ball bearing rotor system

    Institute of Scientific and Technical Information of China (English)

    WANG Li-qin; CUI Li; ZHENG De-zhi; GU Le

    2009-01-01

    Nonlinear forces and moments caused by ball bearing were calculated based on relationship of displacement and deflection and quasi-dynamic model of bearing. Five-DOF dynamic equations of rotor supported by ball bearings were estimated. The Newmark-β method and Newton-Laphson method were used to solve the equations. The dynamic characteristics of rotor system were studied through the time response, the phase portrait, the Poincar? maps and the bifurcation diagrams. The results show that the system goes through the quasiperiodic bifurcation route to chaos as rotate speed increases and there are several quasi-periodic regions and chaos regions. The amplitude decreases and the dynamic behaviors change as the axial load of ball bearing increases; the initial contact angle of ball bearing affects dynamic behaviors of the system obviously. The system can avoid non-periodic vibration by choosing structural parameters and operating parameters reasonably.

  8. Treatment of ASP produced water with hydrophilic fibre ball filtration

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The conventional treatment process cannot meet the need for treatment of produced water from alkaline/surfactant/polymer flooding( ASP produced water) in Daqing oilfield. In this study, a new type of hydrophilic fibre ball medium was developed through surface modification method. The hydrophilic property of the surface modified fibre ball was tested with ASP produced liquid at laboratory. The results showed that this fibre ball had higher oil degreasing efficiency. The surface components were also observed by Scanning Electron Microscope and X-ray Photoelectron Spectroscopy, the result showed that the hydrophilic fibre' s surface was covered by sulfonic group. Using hydrophilic fibre ball as filter medium, a new type of filter was designed to treat ASP produced water in pilot-scale experiments. The obtained results indicated that this type of filter had high capability and efficiency for the treatment of ASP produced water. This filter should have a better application prospect in oilfield produced water treatment.

  9. An overview of Ball Aerospace cryogen storage and delivery systems

    Science.gov (United States)

    Marquardt, J.; Keller, J.; Mills, G.; Schmidt, J.

    2015-12-01

    Starting on the Gemini program in the 1960s, Beech Aircraft (now Ball Aerospace) has been designing and manufacturing dewars for a variety of cryogens including liquid hydrogen and oxygen. These dewars flew on the Apollo, Skylab and Space Shuttle spacecraft providing fuel cell reactants resulting in over 150 manned spaceflights. Since Space Shuttle, Ball has also built the liquid hydrogen fuel tanks for the Boeing Phantom Eye unmanned aerial vehicle. Returning back to its fuel cell days, Ball has designed, built and tested a volume-constrained liquid hydrogen and oxygen tank system for reactant delivery to fuel cells on unmanned undersea vehicles (UUVs). Herein past history of Ball technology is described. Testing has been completed on the UUV specific design, which will be described.

  10. New electrosurgical ball electrode with nonstick properties

    Science.gov (United States)

    Rondinone, Joseph; Brassell, James; Miller, Scott A., III; Thorne, Jonathan O.; Rondinone, David M.; Safabash, Jason; Vega, Felix

    1998-04-01

    A new electrosurgical ball electrode (SilverBulletTM) has been developed for applying radiofrequency (RF) energy to fuse biological and other materials to tissue surfaces. Specifically, the electrode was developed for use in conjunction with the Fusion Medical Technologies, Inc. gelatin patch (RapiSealTM) for use in pulmonary surgery to seal air leaks, and in solid abdominal organ surgeries to provide hemostatic tamponade. The new electrode allows for the application of RF energy in contact mode without the problems of the electrode sticking to the gelatin patch or the underlying tissue. Designed for use with commercially available electrosurgical handpieces, the electrode consists of a stainless steel connector that fits into the hand- piece, and an electrode assembly made from silver that includes a shank region, and a tip extension extending distally from the shank region. The distal tip of the tip extension is rounded and has a length of about 10 mm. The uniqueness of this electrode is the shank region which has a cross sectional area that is larger than the tip extension. The shank region acts as a heat sink to draw away heat from the tip extension while the tip extension itself remains sufficiently small to access desired target sites and display the desired energy transfer properties. In addition to the physical design, the use of silver as the core element provides a material with high electrical and thermal conductivities. The bulk of the electrode is appropriately insulated.

  11. Ball bearing measurement with white light interferometry

    Science.gov (United States)

    Schmit, Joanna; Han, Sen; Novak, Erik

    2009-06-01

    Requirements on high-performance of ball bearings in terms of the loads they experience and their reliability are increasing as the automotive, aerospace, and power generation industries look to cut costs, reduce emissions, and improve efficiency. Most bearings are evaluated with a stylus profiler or with a bright field scopes or microscopes for form, roughness, and defect classification. Two-dimensional stylus measurements captures only very localized surface profiles unless multiple scans are performed which slow the measurement time unacceptably; this leads to inadequate sampling and sometimes greatly varying results based on location and directionality of the line scan. Bright field microscopes deliver only the lateral information about defects but not their depth, volume or surface roughness. White light interferometry can be very successfully utilized in the measurement of full field form, roughness and defect detection and is gaining adoption. They provide rapid, accurate, three-dimensional imaging compatible with the newly developed ISO 3D surface parameters which are expected to rapidly displace traditional 2D metrics. These surface parameters allow for better characterization of surface structure and better understanding of the production process and bearing and race wear. New 3D filtering techniques allow effective separation of form, waviness, and roughness for highly accurate and repeatable bearing qualification.

  12. An Analysis and Implementation of a Parallel Ball Pivoting Algorithm

    Directory of Open Access Journals (Sweden)

    Julie Digne

    2014-07-01

    Full Text Available The problem of surface reconstruction from a set of 3D points given by their coordinates andoriented normals is a difficult problem, which has been tackled with many different approaches.In 1999, Bernardini and colleagues introduced a very elegant and efficient reconstruction methodthat uses a ball pivoting around triangle edges and adds new triangles if the ball is incidentto three points and contains no other points. This paper details an implementation and parallelization of this algorithm.

  13. Aerodynamic loads on a ball-obturated tubular projectile

    OpenAIRE

    Bry, William Arthur

    1982-01-01

    Approved for public release, distribution unlimited A tubular projectile is one with a hole bored along its longitudinal axis. The hole presents a problem in getting the round expelled from a gun. Some means of sealing the hole until the round clears the muzzle is required. A ball -obturator offers one practical means of accomplishing this without any accompanying FOD hazard. The ball-obturator, analogous to a common ballvalve, remains closed under the force of the expand...

  14. Attempts to Create Ball Lightning with Triggered Lightning

    Science.gov (United States)

    2009-10-01

    fluids, solids, and vegetation , as described in the next section. The experiments were performed during Summer 2008 at the International Center for... filters were used on all 35 mm cameras to prevent over-exposure. There were a total of eight successful triggered lightning events during the ball...Dinnis, Ball Lightning Caused by Oxidation of Nanoparticle Networks from Normal Lightning Strikes in Soil, Nature 403, 519-521, 2000 Paiva, G. and Pavão

  15. Wear numbers for ball cup and journal bearings

    OpenAIRE

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in millimetres, the wear modulus in newtons per square millimetre, the maximum wear depth rate of the cup or the cylindrical bearing in millimetres per second, the force between the mating surfaces in newto...

  16. Atmospheric Tar Balls: Particles from Biomass and Biofuel Burning

    Science.gov (United States)

    Posfai, Mihaly; Gelencser, Andras; Simonics, Renata; Arato, Krisztina; Li, Jia; Hobbs, Peter V.; Buseck, Peter R.

    2004-01-01

    Tar balls are amorphous, carbonaceous spherules that occur in the tropospheric aerosol as a result of biomass and biofuel burning. They form a distinct group of particles with diameters typically between 30 and 500 nm and readily identifiable with electron microscopy. Their lack of a turbostratic microstructure distinguishes them from soot, and their morphology and composition (approximately 90 mol% carbon) renders them distinct from other carbonaceous particles. Tar balls are particularly abundant in slightly aged (minutes to hours old) biomass smoke, indicating that they likely form by gas-to-particle conversion within smoke plumes. The material of tar balls is initially hygroscopic; however, the particles become largely insoluble as a result of free radical polymerization of their organic molecules. Consequently, tar balls are primarily externally mixed with other particle types, and they do not appreciably increase in size during aging. When tar balls coagulate with water-bearing particles, their material may partly dissolve and no longer be recognizable as distinct particles. Tar balls may contain organic compounds that absorb sunlight. They are an important, previously unrecognized type of carbonaceous (organic) atmospheric particle.

  17. Atmospheric tar balls: Particles from biomass and biofuel burning

    Science.gov (United States)

    Pósfai, MiháLy; GelencséR, AndráS.; Simonics, RenáTa; Arató, Krisztina; Li, Jia; Hobbs, Peter V.; Buseck, Peter R.

    2004-03-01

    "Tar balls" are amorphous, carbonaceous spherules that occur in the tropospheric aerosol as a result of biomass and biofuel burning. They form a distinct group of particles with diameters typically between 30 and 500 nm and readily identifiable with electron microscopy. Their lack of a turbostratic microstructure distinguishes them from soot, and their morphology and composition (˜90 mol % carbon) renders them distinct from other carbonaceous particles. Tar balls are particularly abundant in slightly aged (minutes to hours old) biomass smoke, indicating that they likely form by gas-to-particle conversion within smoke plumes. The material of tar balls is initially hygroscopic; however, the particles become largely insoluble as a result of free radical polymerization of their organic molecules. Consequently, tar balls are primarily externally mixed with other particle types, and they do not appreciably increase in size during aging. When tar balls coagulate with water-bearing particles, their material may partly dissolve and no longer be recognizable as distinct particles. Tar balls may contain organic compounds that absorb sunlight. They are an important, previously unrecognized type of carbonaceous (organic) atmospheric particle.

  18. On the quantum stability of Q-balls

    CERN Document Server

    Tranberg, Anders

    2014-01-01

    We consider the evolution and decay of Q-balls under the influence of quantum fluctuations. We argue that the most important effect of quantum fluctuations is the modification of the effective potential in which the Q-ball evolves. This effect is in addition to spontaneous decay into elementary particle excitations and decay into smaller Q-balls considered in the literature, which like most tunnelling processes are likely to be strongly suppressed. We exemplify the effect of quantum fluctuations in a particular model potential (quadratic + quartic + sextic couplings), where we implement the inhomogeneous Hartree approximation of quantum dynamics and solve for the evolution of Q-balls in 3+1 dimensions. We find that the stability range as a function of angular velocity $\\omega$ is modified significantly compared to the classical case, so that small-$\\omega$ Q-balls are less stable than in the classical limit, and large-$\\omega$ Q-balls are more stable. This can be understood qualitatively in a simple way.

  19. On the quantum stability of Q-balls

    Energy Technology Data Exchange (ETDEWEB)

    Tranberg, Anders [Faculty of Science and Technology, University of Stavanger,4036 Stavanger (Norway); Weir, David J. [Department of Physics and Helsinki Institute of Physics,PL 64 (Gustaf Hällströmin katu 2), FI-00014 University of Helsinki (Finland)

    2014-04-30

    We consider the evolution and decay of Q-balls under the influence of quantum fluctuations. We argue that the most important effect resulting from these fluctuations is the modification of the effective potential in which the Q-ball evolves. This is in addition to spontaneous decay into elementary particle excitations and fission into smaller Q-balls previously considered in the literature, which — like most tunnelling processes — are likely to be strongly suppressed. We illustrate the effect of quantum fluctuations in a particular model ϕ{sup 6} potential, for which we implement the inhomogeneous Hartree approximation to quantum dynamics and solve for the evolution of Q-balls in 3+1 dimensions. We find that the stability range as a function of (field space) angular velocity ω is modified significantly compared to the classical case, so that small-ω Q-balls are less stable than in the classical limit, and large-ω Q-balls are more stable. This can be understood qualitatively in a simple way.

  20. On the quantum stability of Q-balls

    Science.gov (United States)

    Tranberg, Anders; Weir, David J.

    2014-04-01

    We consider the evolution and decay of Q-balls under the influence of quantum fluctuations. We argue that the most important effect resulting from these fluctuations is the modification of the effective potential in which the Q-ball evolves. This is in addition to spontaneous decay into elementary particle excitations and fission into smaller Q-balls previously considered in the literature, which — like most tunnelling processes — are likely to be strongly suppressed. We illustrate the effect of quantum fluctuations in a particular model ϕ 6 potential, for which we implement the inhomogeneous Hartree approximation to quantum dynamics and solve for the evolution of Q-balls in 3 + 1 dimensions. We find that the stability range as a function of (field space) angular velocity ω is modified significantly compared to the classical case, so that small- ω Q-balls are less stable than in the classical limit, and large- ω Q-balls are more stable. This can be understood qualitatively in a simple way.

  1. Automatic optical inspection system design for golf ball

    Science.gov (United States)

    Wu, Hsien-Huang; Su, Jyun-Wei; Chen, Chih-Lin

    2016-09-01

    ith the growing popularity of golf sport all over the world, the quantities of relevant products are increasing year by year. To create innovation and improvement in quality while reducing production cost, automation of manufacturing become a necessary and important issue. This paper reflect the trend of this production automa- tion. It uses the AOI (Automated Optical Inspection) technology to develop a system which can automatically detect defects on the golf ball. The current manual quality-inspection is not only error-prone but also very man- power demanding. Taking into consideration the competition of this industry in the near future, the development of related AOI equipment must be conducted as soon as possible. Due to the strong reflective property of the ball surface, as well as its surface dimples and subtle flaws, it is very difficult to take good quality image for automatic inspection. Based on the surface properties and shape of the ball, lighting has been properly design for image-taking environment and structure. Area-scan cameras have been used to acquire images with good contrast between defects and background to assure the achievement of the goal of automatic defect detection on the golf ball. The result obtained is that more than 973 of the NG balls have be detected, and system maintains less than 103 false alarm rate. The balls which are determined by the system to be NG will be inspected by human eye again. Therefore, the manpower spent in the inspection has been reduced by 903.

  2. SM/SEED space exposure experiment of ball bearing lubricated by trobo-coating

    OpenAIRE

    足立, 幸志; Adachi, Koshi; 加藤, 康司; Kato, Koji

    2009-01-01

    Degradation of friction properties of three types of ball bearings (conventional vacuum ball bearing and two types of ball bearings lubricated by tribo-coating of indium) exposed to real space environment was investigated on SM/SEED experiment. Well-friction properties of ball bearings lubricated by tribo-coating of indium were maintained for one year exposure to real space field. Even after degradation of ball bearing due to exposure to the real space environment, friction properties could b...

  3. Quenching simulation of steel grinding balls

    Directory of Open Access Journals (Sweden)

    Zapata-Hernández, Oscar

    2015-09-01

    Full Text Available The phase transformations of high carbon steel during quenching and equalizing were modelled using commercial computer packages based on the finite element method and the kinetic transformation of steel. The model was used to predict the temperature and microstructural changes taking place within balls of two different sizes that are used for grinding mineral ores. A good correlation between the temperatures measured by inserted thermocouples and those predicted by the model was obtained after modifying the thermal conductivity of the steel within the temperature domain at which mixed phases are present. The phase transformations predicted were confirmed by metallographic analyses.Las transformaciones de fase en aceros de alto carbono durante su temple y un posterior periodo de estabilización fueron modelizadas por medio del uso de paquetes computacionales basados en el método del elemento finito y de la transformación cinética de los aceros. El modelo se usó para predecir los cambios de temperatura y microestructura que se presentan en bolas de dos diferentes tamaños empleadas en estaciones de molienda de minerales. Se encontró una buena correlación entre las temperaturas medidas mediante la inserción de termopares y aquellas predichas por el modelo una vez que se modificó la conductividad térmica del acero en el intervalo mixto de fases. La predicción de las transformaciones de fase se confirmó a través del análisis metalográfico.

  4. THE BEHAVIOURAL REACTION OF WEANERS TO HANGING TOYS: WOODEN BALL AND AROMATIZED WOODEN BALL – WAY TO REDUCE AGGRESSION AFTER MIXING

    Directory of Open Access Journals (Sweden)

    Jacek NOWICKI

    2008-05-01

    Full Text Available The behaviour of weaners after mixing housed in pens equipped with hanging wooden ball, aromatized with vanilla fluid hanging wooden ball and without enrichment was evaluated. It was found that both enrichments reduced aggression, however the most interesting for weaners was the aromatized wooden ball.

  5. Crystals in crystals

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Schmidt, I.; Carlsson, A.;

    2005-01-01

    A major factor governing the performance of catalytically active particles supported on a zeolite carrier is the degree of dispersion. It is shown that the introduction of noncrystallographic mesopores into zeolite single crystals (silicalite-1, ZSM-5) may increase the degree of particle dispersion...... of the zeolite particles, particularly after thermal treatment. When using mesoporous zeolites, the particles were evenly distributed throughout the mesopore system of the zeolitic support, even after calcination, leading to nanocrystals within mesoporous zeolite single crystals....

  6. Synthesis of hydroxyapatite from eggshell powders through ball milling and heat treatment

    Directory of Open Access Journals (Sweden)

    Shih-Ching Wu

    2016-03-01

    Full Text Available Every day, several million tons of eggshells are being generated as bio-waste across the world. This study demonstrates the synthesis of HA powder using dicalcium phosphate dehydrate (CaHPO4·2H2O, DCPD and eggshell powders via ball milling and subsequent heat treatment. The formation of HA phase can be initiated by sintering the 1 h milled sample at 1000 °C for 1 h, while pure HA phase can be obtained upon sintering the 10 h milled sample. Additionally, the final products composed of biphasic calcium phosphate (HA + β-TCP crystals can easily be prepared by ball milling for 5 h followed by heat treatment at 1000 °C for 1 h. The carbonate peaks observed in the FTIR analysis of the as-prepared HA closely matched those of A- and B-type carbonates, which is typical of the biological apatite. The elemental composition of the as-synthesized HA showed the presence of Ca, P, Mg, and Sr.

  7. Magnetic properties of ball-milled TbFe2 and TbFe2B

    Indian Academy of Sciences (India)

    J Arout Chelvane; S Kasiviswanathan; M V Rao; G Markandeyulu

    2004-04-01

    The magnetic properties of ball-milled TbFe2 and TbFe2B were studied by magnetization measurements. X-ray diffraction studies on TbFe2B showed that boron occupied interstitial position in the crystal structure, just as hydrogen did. The value of the saturation magnetization of TbFe2B was found to be smaller than that of TbFe2. This is explained on the basis of a charge transfer between the boron atoms and the 3d band of Fe. The anisotropy of TbFe2B was found to be large compared to that of TbFe2. X-ray diffractograms for the ball milled samples showed that after 80 h of milling, a predominantly amorphous phase was obtained. TbFe2B was found to undergo easy amorphization compared to TbFe2. Magnetization of TbFe2 was found to decrease rapidly with initial milling hours and was found to be constant with further hours of milling. TbFe2B exhibited an anomalous behaviour with an increase in moment with milling hours and this may be due to the segregation of -Fe.

  8. Single-crystal semiconductor films grown on foreign substrates

    Science.gov (United States)

    Vohl, P.

    1966-01-01

    Intermediate alloy formed between foreign substrates and semiconductor material enable the growth of single crystal semiconductor films on the alloy layer. The melted film must not ball up on the surface of the substrate and neither chemically react nor alloy with the intermediate alloy formed on the substrate.

  9. Effect of soccer shoe upper on ball behaviour in curve kicks

    Science.gov (United States)

    Ishii, Hideyuki; Sakurai, Yoshihisa; Maruyama, Takeo

    2014-08-01

    New soccer shoes have been developed by considering various concepts related to kicking, such as curving a soccer ball. However, the effects of shoes on ball behaviour remain unclear. In this study, by using a finite element simulation, we investigated the factors that affect ball behaviour immediately after impact in a curve kick. Five experienced male university soccer players performed one curve kick. We developed a finite element model of the foot and ball and evaluated the validity of the model by comparing the finite element results for the ball behaviour immediately after impact with the experimental results. The launch angle, ball velocity, and ball rotation in the finite element analysis were all in general agreement with the experimental results. Using the validated finite element model, we simulated the ball behaviour. The simulation results indicated that the larger the foot velocity immediately before impact, the larger the ball velocity and ball rotation. Furthermore, the Young's modulus of the shoe upper and the coefficient of friction between the shoe upper and the ball had little effect on the launch angle, ball velocity, and ball rotation. The results of this study suggest that the shoe upper does not significantly influence ball behaviour.

  10. Atmospheric tar balls: aged primary droplets from biomass burning?

    Science.gov (United States)

    Tóth, A.; Hoffer, A.; Nyirő-Kósa, I.; Pósfai, M.; Gelencsér, A.

    2014-07-01

    Atmospheric tar balls are particles of special morphology and composition that are fairly abundant in the plumes of biomass smoke. These particles form a specific subset of brown carbon (BrC) which has been shown to play a significant role in atmospheric shortwave absorption and, by extension, climate forcing. Here we suggest that tar balls are produced by the direct emission of liquid tar droplets followed by heat transformation upon biomass burning. For the first time in atmospheric chemistry we generated tar-ball particles from liquid tar obtained previously by dry distillation of wood in an all-glass apparatus in the laboratory with the total exclusion of flame processes. The particles were perfectly spherical with a mean optical diameter of 300 nm, refractory, externally mixed, and homogeneous in the contrast of the transmission electron microscopy (TEM) images. They lacked any graphene-like microstructure and exhibited a mean carbon-to-oxygen ratio of 10. All of the observed characteristics of laboratory-generated particles were very similar to those reported for atmospheric tar-ball particles in the literature, strongly supporting our hypothesis regarding the formation mechanism of atmospheric tar-ball particles.

  11. Nano-subgrain Strengthening in Ball-milled Iron

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D R; Syn, C K; Sherby, O D

    2006-03-23

    The strength and deformation behavior of ball-milled, iron-base materials containing nano-scale subgrains have been evaluated. As reported by several authors, nanosubgrains form during the early stages of ball milling as a result of severe plastic deformation inherent in the ball milling process. The strength for these nano-scale subgrains are compared with the strength of larger-scale subgrains in iron and iron-base alloys produced by traditional mechanical working. The data covers over 2 orders of magnitude in subgrain size (from 30 nm to 6 {micro}m) and shows a continuous pattern of behavior. For all materials studied, the strength varied as {lambda}{sup -1}, where {lambda} is the subgrain size. Strengthening from subgrains was found to breakdown at a much smaller subgrain size than strengthening from grains. In addition, the ball-milled materials showed significant strengthening contributions from nano-scale oxide particles. Shear bands are developed during testing of ball-milled materials containing ultra-fine subgrains. A model for shear band development in nano-scale subgrains during deformation has also been developed. The model predicts a strain state of uniaxial compression in the shear band with a strain of -1.24. Subgrains are shown to offer the opportunity for high strength and good work hardening with the absence of yield point behavior.

  12. String Theory at LHC Using Top Quarks From String Balls

    CERN Document Server

    Nayak, Gouranga C

    2009-01-01

    According to string theory, string ball is a highly excited long string which decays to standard model particles at the Hagedorn temperature with thermal spectrum. If there are extra dimensions, the string scale can be ~TeV, and we should produce string balls at CERN LHC. In this paper we study top quark production from string balls at LHC and compare with the parton fusion results at NNLO using pQCD. We find significant top quark production from string balls at LHC which is comparable to standard model NNLO results. We also find that d\\sigma/dp_T of top quarks from string balls does not decrease significantly with increase in p_T, whereas it deceases sharply in case of standard model NNLO scenario. Hence, in the absence of black hole production at LHC, an enhancement in top quark cross section and its abnormal p_T distribution can be a signature of TeV scale string physics at LHC.

  13. New data on the formation of Carboniferous coal balls

    Energy Technology Data Exchange (ETDEWEB)

    Scott, A.C.; Mattey, D.P.; Howard, R. [University of London, Egham (United Kingdom). Royal Holloway and Bedford New College, Dept. of Geology

    1996-10-01

    Coal balls are formed from the precipitation of carbonate minerals, predominantly calcite, from water during or immediately post-peat formation. Previous petrological studies suggest permineralization occurred at various stages during the peatificiation process by precipitation from a mixture of marine and meteoric freshwater. The geochemical studies reported here aimed to test previous theories of coal ball formation. The coal balls studied are from Upper Carboniferous and Carboniferous/Permian coal seams in Britain, United States of America, Belgium and China. Stable carbon isotopic values of calcites range from {delta}{sup 13}C of -5 to -35 parts per thousand indicating highly variable contribution of decayed organic matter to the carbonate cement. Oxygen isotopic values of delta({sup 18}) range from -3 to -15 parts per thousand suggest both marine and meteoric freshwater sources. The range, in the British coal balls in particular, with {delta}{sup 13}C ranging from -7 to -25 parts per thousand indicates the complexity of carbonate generation. Isotopic data support at least four theories of carbonate coal ball formation. This makes their absence from post-Permian coals the more puzzling and it is suggested that the overall structure of the peat may play a role.

  14. Transformation of Goethite to Hematite Nanocrystallines by High Energy Ball Milling

    Directory of Open Access Journals (Sweden)

    O. M. Lemine

    2014-01-01

    Full Text Available α-Fe2O3 nanocrystallines were prepared by direct transformation via high energy ball milling treatment for α-FeOOH powder. X-ray diffraction, Rietveld analysis, TEM, and vibrating sample magnetometer (VSM are used to characterize the samples obtained after several milling times. Phase identification using Rietveld analysis showed that the goethite is transformed to hematite nanocrystalline after 40 hours of milling. HRTEM confirm that the obtained phase is mostly a single-crystal structure. This result suggested that the mechanochemical reaction is an efficient way to prepare some iron oxides nanocrystallines from raw materials which are abundant in the nature. The mechanism of the formation of hematite is discussed in text.

  15. Shoe collar height effect on athletic performance, ankle joint kinematics and kinetics during unanticipated maximum-effort side-cutting performance.

    Science.gov (United States)

    Lam, Gilbert Wing Kai; Park, Eun Jung; Lee, Ki-Kwang; Cheung, Jason Tak-Man

    2015-01-01

    Side-step cutting manoeuvres comprise the coordination between planting and non-planting legs. Increased shoe collar height is expected to influence ankle biomechanics of both legs and possibly respective cutting performance. This study examined the shoe collar height effect on kinematics and kinetics of planting and non-planting legs during an unanticipated side-step cutting. Fifteen university basketball players performed maximum-effort side-step cutting to the left 45° direction or a straight ahead run in response to a random light signal. Seven successful cutting trials were collected for each condition. Athletic performance, ground reaction force, ankle kinematics and kinetics of both legs were analysed using paired t-tests. Results indicated that high-collar shoes resulted in less ankle inversion and external rotation during initial contact for the planting leg. The high-collar shoes also exhibited a smaller ankle range of motion in the sagittal and transverse planes for both legs, respectively. However, no collar effect was found for ankle moments and performance indicators including cutting performance time, ground contact time, propulsion ground reaction forces and impulses. These findings indicated that high-collar shoes altered ankle positioning and restricted ankle joint freedom movements in both legs, while no negative effect was found for athletic cutting performance.

  16. Crystal science fundamentals

    OpenAIRE

    Ramachandran, V.; Halfpenny, PJ; Roberts, KJ

    2017-01-01

    The fundamentals of crystal science notably crystallography, crystal chemistry, crystal defects, crystal morphology and the surface chemistry of crystals are introduced with particular emphasis on organic crystals.

  17. Characterizations of Universal Finite Representability and B-convexity of Banach Spaces via Ball Coverings

    Institute of Scientific and Technical Information of China (English)

    Wen ZHANG

    2012-01-01

    By a ball-covering B of a Banach space X,we mean thatB is a collection of open (or closed)balls off the origin whose union contains the unit sphere of X; and X is said to have the ball-covering property provided it admits a ball-covering of countably many balls.This paper shows that universal finite representability and B-convexity of X can be characterized by properties of ball-coverings of its finite dimensioral subspaces.

  18. Effects of turbulence on the drag force on a golf ball

    Science.gov (United States)

    Cross, Rod

    2016-09-01

    Measurements are presented of the drag force on a golf ball dropped vertically into a tank of water. As observed previously in air, the drag coefficient drops sharply when the flow becomes turbulent. The experiment would be suitable for undergraduate students since it can be undertaken at low ball speeds and since the effects of turbulence are easily observed on video film. A modified golf ball was used to show how a ball with a smooth and a rough side, such as a cricket ball, is subject to a side force when the ball surface itself is asymmetrical in the transverse direction.

  19. Kinetic study of ferronickel slag grinding at variation of ball filling and ratio of feed to grinding balls

    Science.gov (United States)

    Sanwani, Edy; Ikhwanto, Muhammad

    2017-01-01

    The objective of this paper is to investigate the effect of ball filling and ratio of feed to grinding balls on the kinetic of grinding of ferronickel slag in a laboratory scale ball mill. The experiments were started by crushing the ferronickel slag samples using a roll crusher to produce -3 mesh (-6.7 mm) product. This product, after sampling and sample dividing processes, was then used as feed for grinding process. The grinding was performed with variations of ball filling and ratio of feed to grinding balls for 150 minutes. At every certain time interval, particle size analysis was carried out on the grinding product. The results of the experiments were also used to develop linear regression model of the effect of grinding variables on the P80 of the product. Based on this study, it was shown that P80 values of the grinding products declined sharply until 70 minutes of grinding time due to the dominant mechanism of impact breakage and then decreased slowly after 70 minutes until 150 minutes of grinding time due to dominant mechanism of attrition breakage. Kinetics study of the grinding process on variations of grinding ball filling showed that the optimum rate of formation of fine particles for 20%, 30%, 40% and 50% mill volume was achieved at a particle size of 400 µm in which the best initial rate of formation occurred at 50% volume of mill. At the variations of ratio of feed to grinding balls it was shown that the optimum rate of grinding for the ratio of 1:10, 1: 8 and 1: 6 was achieved at a particle size of 400 µm and for the ratio of 1: 4 was at 841 µm in which the best initial rate of formation occurred at a 1:10 ratio. In this study, it was also produced two regression models that can predict the P80 value of the grinding product as a function of the variables of grinding time, ball filling and the ratio of the feed to grinding balls.

  20. Supermassive dark-matter Q-balls in galactic centers?

    Energy Technology Data Exchange (ETDEWEB)

    Troitsky, Sergey [Institute for Nuclear Research of the Russian Academy of Sciences,60th October Anniversary Prospect 7a, Moscow 117312 (Russian Federation); Moscow Institute for Physics and Technology,Institutskii per. 9, 141700, Dolgoprudny, Moscow Region (Russian Federation)

    2016-11-11

    Though widely accepted, it is not proven that supermassive compact objects (SMCOs) residing in galactic centers are black holes. In particular, the Milky Way’s SMCO can be a giant nontopological soliton, Q-ball, made of a scalar field: this fits perfectly all observational data. Similar but tiny Q-balls produced in the early Universe may constitute, partly or fully, the dark matter. This picture explains in a natural way, why our SMCO has very low accretion rate and why the observed angular size of the corresponding radio source is much smaller than expected. Interactions between dark-matter Q-balls may explain how SMCOs were seeded in galaxies and resolve well-known problems of standard (non-interacting) dark matter.

  1. Acoustic monitoring of a ball sinking in vibrated granular sediments

    Science.gov (United States)

    van den Wildenberg, Siet; Léopoldès, Julien; Tourin, Arnaud; Jia, Xiaoping

    2017-06-01

    We develop an ultrasound probing to investigate the dynamics of a high density ball sinking in 3D opaque dense granular suspensions under horizontal weak vibrations. We show that the motion of the ball in these horizontally vibrated glass bead packings saturated by water is consistent with the frictional rheology. The extracted stress-strain relation evidences an evolution of flow behaviour from frictional creep to inertial regimes. Our main finding is that weak external vibration primarily affects the yield stress and controls the depth of sinking via vibration-induced sliding at the grain contact. Also, we observe that the extracted rheological parameters depend on the size of the probing ball, suggesting thus a non-local rheology.

  2. The Heads and Tails of Buoyant Autocatalytic Balls

    CERN Document Server

    Rogers, Michael C

    2012-01-01

    Buoyancy produced by autocatalytic reaction fronts can produce fluid flows that advect the front position, giving rise to interesting feedback between chemical and hydrodynamic effects. In a large diameter, extended cylinder that is relatively free of boundary constraints, localized initiation of an iodate-arsenous acid (IAA) reaction front on the bottom boundary generates a rising autocatalytic plume. Such plumes have several differences from their non-reactive counterparts. Using numerical simulation, we have found that if reaction is initiated using a spherical ball of product solution well above the bottom boundary, the subsequent flow can evolve much like an autocatalytic plume: the ball develops a reacting head and tail that is akin to the head and conduit of an autocatalytic plume, except that the tail is disconnected from the boundary. In the limit of large initial autocatalytic balls, however, growth of a reacting tail is suppressed and the resemblance to plumes disappears. Conversely, very small bal...

  3. Realtime Vision-Based Surface Defect Inspection of Steel Balls

    Institute of Scientific and Technical Information of China (English)

    Wang Zhong; Xing Qian; Fu Luhua; Sun Hong

    2015-01-01

    In the proposed system for online inspection of steel balls, a diffuse illumination is developed to enhance defect appearances and produce high quality images. To fully view the entire sphere, a novel unfolding method is put forward based on geometrical analysis, which only requires one-dimensional movement of the balls and a pair of cam-eras to capture images from different directions. Moreover, a realtime inspection algorithm is customized to improve both accuracy and efficiency. The precision and recall of the sample set were 87.7% and 98%, respectively. The aver-age time cost on image processing and analysis for a steel ballwas 47 ms, and the total time cost was less than 200 ms plus the cost of image acquisition and balls’ movement. The system can sort 18 000 balls per hour with a spatial reso-lution higher than 0.01 mm.

  4. Rotating and rolling rigid bodies and the "hairy ball" theorem

    Science.gov (United States)

    Bormashenko, Edward; Kazachkov, Alexander

    2017-06-01

    Rotating and rolling rigid bodies exemplify a fascinating theorem of topology, jokingly called the "hairy ball" theorem, which demands that any continuous tangent vector field on the sphere has at least one point where the field is zero. We demonstrate via a gedanken experiment how drilling through a rotating ball, thereby converting it into a torus, leads to the elimination of zero-velocity points on the ball surface. Using the same reasoning, zero-velocity points can be removed from the surface of a drilled spinning top. We discuss the location of zero-velocity points on the surfaces of rigid bodies rolling with no slip and with slip. Observations made from different reference frames identify various zero-velocity points. Illustrative experiments visualizing zero-velocity points are presented.

  5. The aerodynamics of tennis balls-The topspin lob

    Science.gov (United States)

    Štěpánek, Antonín

    1988-02-01

    A general description is presented of the calculation of the ballistic trajectory of a flying spinning ball acted on, in addition to the forces of gravity and drag, by the so-called Magnus force. By applying the regression analysis to results of wind-tunnel measurement of the drag and lift coefficients of a spinning ball, a calculation of the nonlinear differential equation of the hodograph was carried out by means of the Runge-Kutta method. The theoretical results that can be used to calculate the ballistic trajectories for any ball game were applied to one of the most difficult and most interesting tennis strokes, i.e., to the topspin lob. Practical results obtained for various distances are presented in a table as well as in graphical form. UFAJP

  6. Finite Element Analysis of 6300 Deep Groove Ball Bearing

    Institute of Scientific and Technical Information of China (English)

    DENG Chi; YANG Guang-hui

    2013-01-01

    Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.

  7. A power recirculating test rig for ball screw endurance tests

    Directory of Open Access Journals (Sweden)

    Giberti Hermes

    2016-01-01

    Full Text Available A conceptual design of an innovative test rig for endurance tests of ball screws is presented in this paper. The test rig layout is based on the power recirculating principle and it also allows to overtake the main critical issues of the ball screw endurance tests. Among these there are the high power required to make the test, the lengthy duration of the same and the high loads between the screw and the frame that holds it. The article describes the test rig designed scheme, the kinematic expedients to be adopted in order to obtain the required performance and functionality and the sizing procedure to choose the actuation system.

  8. Note: A 1-m Foucault pendulum rolling on a ball

    Science.gov (United States)

    Salva, H. R.; Benavides, R. E.; Venturino, J. A.; Cuscueta, D. J.; Ghilarducci, A. A.

    2013-10-01

    We have built a short Foucault pendulum of 1-m length. The aim of this work was to increase the sensitivity to elliptical trajectories from other longer pendula. The design was a semi-rigid pendulum that rolls over a small ball. The measurements of the movements (azimuth and elliptical trajectory) were done by an optical method. The resulting pendulum works in a medium satisfactory way due to problems of the correct choice of the mass of the bob together with the diameter of the supporting ball. It is also important to keep the rolling surface very clean.

  9. Structure of Flame Balls at Low Lewis-Number

    Science.gov (United States)

    Weiland, Karen J.; Ronney, Paul

    1998-01-01

    The Structure of Flame Balls at Low Lewis-Number (SOFBALL) experiment explored the behavior of a newly discovered flame phenomena called "flame balls." These spherical, stable, stationary flame structures, observed only in microgravity, provide a unique opportunity to study the interactions of the two most important processes necessary for combustion (chemical reaction and heat and mass transport) in the simplest possible configuration. The previously unobtainable experimental data provided a comparison with models of flame stability and flame propagation limits that are crucial both in assessing fire safety and in designing efficient, clean-burning combustion engines.

  10. Spin Rate and Deflection Ratio of a Ping Pong Ball

    Directory of Open Access Journals (Sweden)

    Byung Joon Ahn

    2013-01-01

    Full Text Available To investigate the effects of a spherical object’s spin rate on the curvature of its flight, Ping Pong balls, of varying spin rates, were hit horizontally and recorded from above with a high-speed camera. It was shown that there was a proportional relationship between the ball’s spin rate and deflection ratio. Additionally, using the results of the analyzed data, a coefficient of skin friction of the Ping Pong ball was found to be approximately 0.2 under the specific conditions of this investigation.

  11. Effect of wet grinding on structural properties of ball clay

    Science.gov (United States)

    Purohit, A.; Hameed, A.; Chander, S.; Nehra, S. P.; Singh, P.; Dhaka, M. S.

    2015-05-01

    In this paper, the effect of wet grinding on structural properties of ball clay is undertaken. The wet grinding treatment was performed employing ball and vibro mills for different time spells of 2, 4, 8 and 16 hours. The structural properties were carried out using X-ray diffraction (XRD). The structure of ground samples is found to be simple cubic. The crystallographic parameters are calculated and slight change in lattice constant, inter planner spacing and particle size is observed with grinding treatment. The results are in agreement with the available literature.

  12. Image enlargement using biharmonic Said-Ball surface

    Science.gov (United States)

    Saaban, A.; Kherd, A.; Jameel, A. F.; Akhadkulov, H.; Alipiah, F. M.

    2017-09-01

    This paper discusses the use of biharmonic cubic Said-Ball surfaces in image enlargement area. Resizing an image through up sampling or down sampling is generally common for making smaller image fit a bigger screen in full screen mode or reducing a higher resolution image to a smaller resolution. However due to some limitation, this paper will focus on image enlargement based on scaling factor of two. We use biharmonic cubic Said-Ball subject to a given four boundary curves condition respectively. We implement and evaluate the performance of the proposed method based on peak signal to noise ratio (PSNR) indicator using well-known gray-scale test images.

  13. Plasma crystals: experiments and simulation

    Science.gov (United States)

    Piel, A.

    2017-01-01

    Dusty plasmas are a well accessible system to study crystallization of charged-particle systems at room temperature. The large mass compared to atomic particles dramatically slows down the particle velocities. The high transparency of the system allows to trace simultaneously the motion of all particles with quasi-atomic resolution. After a brief overview, the progress in this field is exemplified by studies of spherical three-dimensional plasma crystals, the so-called Yukawa balls. The static structure and eigenmodes are explained in simple terms. It is shown that shielding modifies the expansion of a Yukawa ball from a self-similar explosion to a continuous ablation process that starts at the surface. The experimental progress with three-dimensional diagnostics and laser heating and sophisticated methods for visualising the order inside the shell structure are described. Together with quantifying the diffusion coefficient these investigations reveal the details of the solid-liquid phase transition. Besides thermodynamic aspects, the liquid phase of dusty plasmas also gives access to hydrodynamic phenomena at the individual particle scale.

  14. Effect of panel shape of soccer ball on its flight characteristics

    Science.gov (United States)

    Hong, Sungchan; Asai, Takeshi

    2014-05-01

    Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory.

  15. Study of new occurrences of plastic (ball) clays from northeastern Brazil for use in refractory ceramics; Estudo de novas ocorrencias de argilas plasticas (ball clays) do nordeste do Brasil para uso em ceramicas refratarias

    Energy Technology Data Exchange (ETDEWEB)

    Cartaxo, J.M.; Bastos, P. de M.; Santana, L.N.L.; Menezes, R.R.; Neves, G.A.; Ferreira, H.C., E-mail: julianamelo25@gmail.com, E-mail: paulos@cstr.ufcg.edu.br, E-mail: lisiane.navarro@ufcg.edu.br, E-mail: romualdo.menezes@ufcg.edu.br, E-mail: gelmires.neves@ufcg.edu.br, E-mail: heber.ferreira@ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2016-10-15

    The northeast of Brazil has large deposits of ball clays generally situated in Barreiras Formation and are used in white ceramic and refractory materials. These clays are composed of secondary kaolinite and organic matter, being very plastic and when subjected to elevated temperatures burn with white colors and present phase transformations showing mainly crystals formation of mullite and cristobalite. This work aims to study new deposits of ball clays in order to use them to refractory materials production. The clays were characterized by laser diffraction, X-ray diffraction (XRD), X-ray fluorescence, refractoriness, thermal analysis, and scanning electron microscopy (SEM). The samples were pressed and sintered at 1000, 1150, 1250, 1280 and 1400 °C. The characterization after firing was carried out by XRD and SEM. Then, the physical and mechanical properties - absorption, porosity and flexural strength, were determined. The results showed that the clays presented formation of mullite crystals with physical, chemical and mineralogical properties suitable for use in refractory ceramics. (author)

  16. 关注临床试验中非预期不良事件的伦理审查%Ethical Review of Unanticipated Adverse Events in Clinical Research

    Institute of Scientific and Technical Information of China (English)

    徐秀英; 梁丕霞

    2016-01-01

    Ethical review of unanticipated adverse events in clinical research has been paid attention more and more closely. Based on guidance on reviewing and reporting unanticipated adverse events involving risks to subjects or others and adverse events issued by US office for human research problems(OHRP) in 2007, this paper introduced the deifnition of unanticipated adverse events and analyzed the review procedure of ethical committee by listing examples in order to be referred for researchers and ethical committee.%临床试验中非预期不良事件的伦理审查越来越受到重视,根据2007年美国人类研究保护办公室(OHRP)指南,以案例的形式对非预期不良事件的定义、判断、伦理审查等方面进行了分析介绍,供研究者、申办方、伦理审查人员共同参考。

  17. Design factors for “linear” ball valve: theoretical and experimental studies

    OpenAIRE

    Thananchai Leephakpreeda

    2005-01-01

    Generic non-linear flow characteristics of the conventional ball valve limit the applications of flow modulation in fluid processes. This work presents the flow characteristics of fluid flowing through the conventional and modified ball valves for feasibility of a “linear” ball valve. Theoretical studies are discussed for determining explicit and implicit factors on the valve coefficient, which modulates the flow rate of fluid when the ball valve is operated in flow control processes. In expe...

  18. Simulating Army-Relevant Spur Gear Contacts with a Ball-on-Disc Tribometer

    Science.gov (United States)

    2015-09-01

    the operating envelope of a ball-on- disc tribometer. 15. SUBJECT TERMS gear contacts, spur, WAM, Wedeven Associates, Machine , envelope, ball-on...a ball-on-disc tribometer. The ball-on-disc tribometer described within this report is the Wedeven Associates Machine (WAM). The envelope of...point of single tooth contact and is significant in that it is usually the point along the tooth that is used to calculate the tooth bending stress.10

  19. Unifying representation of Bézier curve and two kinds of generalized ball curves

    Institute of Scientific and Technical Information of China (English)

    ZHU Xiaolin; WANG Zhihua

    2012-01-01

    This paper presents a new basis, the WSB basis, which unifies the Bemstein basis, Wang-Ball basis and Said-Ball basis, and therefore the Bézier curve, Wang-Ball curve and Said-Ball curve are the special cases of the WSB curve based on the WSB basis In addition, the relative degree elevation formula, recursive algorithm and conversion formula between the WSB basis and the Bern- stein basis are given.

  20. Real-time detecting and tracking ball with OpenCV and Kinect

    Science.gov (United States)

    Osiecki, Tomasz; Jankowski, Stanislaw

    2016-09-01

    This paper presents a way to detect and track ball with using the OpenCV and Kinect. Object and people recognition, tracking are more and more popular topics nowadays. Described solution makes it possible to detect ball based on the range, which is set by the user and capture information about ball position in three dimensions. It can be store in the computer and use for example to display trajectory of the ball.

  1. Research on Abrasives in the Chemical Mechanical Polishing Process for Silicon Nitride Balls

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Silicon nitride (Si 3N 4) has been the main material for balls in ceramic ball bearings, for its lower density, high strength, high hardness, fine thermal stability and anticorrosive, and is widely used in various fields, such as high speed and high temperature areojet engines, precision machine tools and chemical engineer machines. Silicon nitride ceramics is a kind of brittle and hard material that is difficult to machining. In the traditional finishing process of silicon nitride balls, balls are lapped...

  2. Forced vibration of a ball attached to a cable

    Directory of Open Access Journals (Sweden)

    Douglas Oliver

    2000-01-01

    Full Text Available This work describes an analytic solution to predict the forced oscillation of a suspended cable and an attached ball. The oscillations are driven by a sinusoidal movement at the fixed end of the cable. This problem may be used in the verification of numerical software which is commonly used to design systems with suspended cables.

  3. Whitey SCHe Ball Valves Provide Test Port Isolation

    Energy Technology Data Exchange (ETDEWEB)

    MISKA, C.R.

    2000-09-15

    These valves are 1/4 inch ball valves fabricated of 316 stainless steel. Packing is TFE (standard). They are used as normally closed isolation valves for test ports in the SCHe System between the gage root valve and the pressure indicator.

  4. Eric Cantona: Fußball-Ikone der modernen Medienwelt

    Directory of Open Access Journals (Sweden)

    Martin Wassermair

    2010-03-01

    Full Text Available In Unterhaltungsindustrie und Massenmedien nimmt der Sport eine im wahrsten Sinne des Wortes bewegende Rolle ein. Er ist zugleich Wettkampf-Arena und Wunschmaschine, Werbefläche und Starproduktion. Dass die Erscheinungsformen des Sports in der modernen Medienwelt einer rasanten Dynamik und Wechselbeziehung unterliegen, ist am Beispiel des Massenphänomens Fußballs vielleicht am deutlichsten abzulesen.

  5. On the isoperimetric rigidity of extrinsic minimal balls

    DEFF Research Database (Denmark)

    Markvorsen, Steen; Palmer, V.

    2003-01-01

    We consider an m-dimensional minimal submanifold P and a metric R-sphere in the Euclidean space R-n. If the sphere has its center p on P, then it will cut out a well defined connected component of P which contains this center point. We call this connected component an extrinsic minimal R-ball of ...

  6. Predicting brain acceleration during heading of soccer ball

    Science.gov (United States)

    Taha, Zahari; Hasnun Arif Hassan, Mohd; Azri Aris, Mohd; Anuar, Zulfika

    2013-12-01

    There has been a long debate whether purposeful heading could cause harm to the brain. Studies have shown that repetitive heading could lead to degeneration of brain cells, which is similarly found in patients with mild traumatic brain injury. A two-degree of freedom linear mathematical model was developed to study the impact of soccer ball to the brain during ball-to-head impact in soccer. From the model, the acceleration of the brain upon impact can be obtained. The model is a mass-spring-damper system, in which the skull is modelled as a mass and the neck is modelled as a spring-damper system. The brain is a mass with suspension characteristics that are also defined by a spring and a damper. The model was validated by experiment, in which a ball was dropped from different heights onto an instrumented dummy skull. The validation shows that the results obtained from the model are in a good agreement with the brain acceleration measured from the experiment. This findings show that a simple linear mathematical model can be useful in giving a preliminary insight on what human brain endures during a ball-to-head impact.

  7. THE PROBLEM OF "STRUNG BALLS" IN HIGH DIMENSION

    Institute of Scientific and Technical Information of China (English)

    ZHANG Weinian

    2004-01-01

    The problem of "strung balls", which considers how many circles in a given family of circles can be intersected by a line in a plane, is discussed in Rn(n≥3). Higher dimensional versions of the results given on a plane are obtained.

  8. Teaching Moderately Handicapped Students to Play Tee-Ball.

    Science.gov (United States)

    Swenson-Pierce, Ann; Kohl, Frances L.

    1986-01-01

    A tee-ball training program was implemented in an integrated educational setting to provide two moderately handicapped elementary students with a wide range of age-appropriate leisure activities. Possible adaptations are described in terms of playing space, skill sequence, rules, and materials. (CL)

  9. Temporomandibular joint dislocation and deafness from a cricket ball injury.

    Science.gov (United States)

    Murthy, P; Bandasson, C; Dhillon, R S

    1994-05-01

    Cricket is a national sport in some countries and can be potentially hazardous. We report an incident of a cricket ball impact to the chin, which resulted in posterior dislocation of both temporomandibular joints and bilateral mixed deafness. There appear to be no similar case reports in the literature.

  10. The spectacle of the ball python (Python regius)

    DEFF Research Database (Denmark)

    Da Silva, Mari-Ann Otkjær; Heegaard, Steffen; Wang, Tobias

    2014-01-01

    A detailed morphological description of the spectacle of the ball python (Python regius) is provided. The eyes of 21 snakes were examined by light microscopy and/or transmission electron microscopy. Additionally, eyes of nine live snakes were examined using optical coherence tomography (OCT...

  11. Moment of Inertia of a Ping-Pong Ball

    Science.gov (United States)

    Cao, Xian-Sheng

    2012-01-01

    This note describes how to theoretically calculate and experimentally measure the moment of inertia of a Ping-Pong[R] ball. The theoretical calculation results are in good agreement with the experimental measurements that can be reproduced in an introductory physics laboratory.

  12. A Beurling-Lax type theorem in the unit ball

    NARCIS (Netherlands)

    Alpay, D; Dijksma, A; Rovnyak, J

    2002-01-01

    We prove a Beurling-Lax theorem for a family of reproducing kernel Hilbert spaces of functions analytic in an open subset of the unit ball containing the origin. The spaces under consideration are characterized by functions called Schur multipliers. Using the theory of linear relations in Pontryagin

  13. Systematization of problems on ball estimates of a convex compactum

    Science.gov (United States)

    Dudov, S. I.

    2015-09-01

    We consider a class of finite-dimensional problems on the estimation of a convex compactum by a ball of an arbitrary norm in the form of extremal problems whose goal function is expressed via the function of the distance to the farthest point of the compactum and the function of the distance to the nearest point of the compactum or its complement. Special attention is devoted to the problem of estimating (approximating) a convex compactum by a ball of fixed radius in the Hausdorff metric. It is proved that this problem plays the role of the canonical problem: solutions of any problem in the class under consideration can be expressed via solutions of this problem for certain values of the radius. Based on studying and using the properties of solutions of this canonical problem, we obtain ranges of values of the radius in which the canonical problem expresses solutions of the problems on inscribed and circumscribed balls, the problem of uniform estimate by a ball in the Hausdorff metric, the problem of asphericity of a convex body, the problems of spherical shells of the least thickness and of the least volume for the boundary of a convex body. This makes it possible to arrange the problems in increasing order of the corresponding values of the radius. Bibliography: 34 titles.

  14. Nocardia asteroids causing pulmonary nocardiosis presenting as fungal ball

    Directory of Open Access Journals (Sweden)

    Bimoch Projna Paty

    2014-01-01

    Full Text Available Pulmonary nocardiosis presenting as a fungal ball in a preexisting cavity is a rare presentation. We report such a case in a 18 yrs old male patient presented with cough with expectoration & episodes of haemoptysis with a past history of tuberculosis. Diagnosis was done by microscopic examination of the resected sample & confirmed on culture.

  15. On the Quaternion Ball and the Quaternion Projective Space

    Institute of Scientific and Technical Information of China (English)

    Qi Keng LU

    2005-01-01

    Since the quaternion ball was used to study the AdS/CFT problems for spinor fields, it is worthwhile to study further the geometry (in sense of Klein) and analysis on it and on its extended space (in the sense of Behnke-Thullen), the quaternion projective space.

  16. Precession of a Spinning Ball Rolling down an Inclined Plane

    Science.gov (United States)

    Cross, Rod

    2015-01-01

    A routine problem in an introductory physics course considers a rectangular block at rest on a plane inclined at angle a to the horizontal. In order for the block not to slide down the incline, the coefficient of sliding friction, µ, must be at least tan a. The situation is similar for the case of a ball rolling down an inclined plane. In order…

  17. Reduced graphene oxide synthesis by high energy ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Mondal, O. [Department of Physics, M.U.C Women' s College, Burdwan 713104 (India); Mitra, S. [MLS Prof' s Unit, Indian Association for the Cultivation of Science, Kolkata 700032 (India); Pal, M. [CSIR-Central Glass and Ceramic Research Institute, Kolkata 700032 (India); Datta, A. [University School of Basic and Applied Science (USBAS), Guru Gobind Singh Indraprastha University, New Delhi 110075 (India); Dhara, S. [Surface and Nanoscience Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India); Chakravorty, D., E-mail: mlsdc@iacs.res.in [MLS Prof' s Unit, Indian Association for the Cultivation of Science, Kolkata 700032 (India)

    2015-07-01

    Graphene oxide is transformed to reduced graphene oxide by high energy ball milling in inert atmosphere. The process of ball milling introduces defects and removes oxygen functional groups, thereby creating the possibility of fine tuning the band gap of all intermediate stages of the structural evolution. A limit of the backbone sp{sup 2} network structure has been found which should be able to accommodate defects, before amorphization sets in. The amorphization of graphene oxide is achieved rather quickly in comparison to that of graphite. From thermogravimetric and differential scanning calorimetric analysis along with Fourier transform infrared (FTIR) and Raman spectroscopic studies, it is found that the number of oxygen-containing groups decreases at a faster rate than that of aromatic double bonds with increasing ball milling time with a maximum limit of 3 h. Several characterization techniques (FTIR, Raman, UV–Visible and X-ray photoelectron spectroscopy) have confirmed that the material synthesized is, indeed, reduced graphene oxide. - Highlights: • Graphene oxide is transformed to reduced graphene oxide by high energy ball milling in inert atmosphere. • Fine tuning the band gap by introducing defects and removing oxygen functional groups. • Introduction of excess defects leads to amorphization. • Photoluminescence has been observed in the UV-blue region.

  18. Structural and magnetic properties of ball milled copper ferrite

    DEFF Research Database (Denmark)

    Goya, G.F.; Rechenberg, H.R.; Jiang, Jianzhong

    1998-01-01

    The structural and magnetic evolution in copper ferrite (CuFe2O4) caused by high-energy ball milling are investigated by x-ray diffraction, Mössbauer spectroscopy, and magnetization measurements. Initially, the milling process reduces the average grain size of CuFe2O4 to about 6 nm and induces ca...

  19. Weighted Plancherel formula on unit ball in R

    Institute of Scientific and Technical Information of China (English)

    刘建明; 郑维行

    1996-01-01

    Let / be a function on the unit ball of Rn. For , the action T of SO0 (1, n) on f isdefined by .The invariant Laplacian corresponding to T is calculated, and a family of its eigenfunctions is found out. Then the corresponding Fourier transform is defined and the inversion formula and Plancherel formula are obtained.

  20. Correlation functions for a periodic box-ball system

    Energy Technology Data Exchange (ETDEWEB)

    Mada, Jun [College of Industrial Technology, Nihon University, 2-11-1 Shin-ei, Narashino, Chiba 275-8576 (Japan); Tokihiro, Tetsuji [Graduate School of Mathematical Sciences, University of Tokyo, 3-8-1 Komaba, Tokyo 153-8914 (Japan)

    2010-04-02

    We investigate correlation functions in a periodic box-ball system. For the two-point functions of short distance, we give explicit formulae obtained by combinatorial methods. We give expressions for general N-point functions in terms of ultradiscrete theta functions.

  1. Dimpled Ball Grid Array process development for space flight applications

    Science.gov (United States)

    Barr, S. L.; Mehta, A.

    2000-01-01

    The 472 Dimpled Ball Grid Array (D-BGA) package has not been used in past space flight environments, therefore it is necessary to determine the robustness and reliability of the solder joints. The 472 D-BGA packages passed the above environmental tests within the specifications and are now qualified for use on space flight electronics.

  2. Brown carbon in tar balls from smoldering biomass combustion

    Science.gov (United States)

    R. K. Chakrabarty; H. Moosmuller; L.-W. A. Chen; K. Lewis; W. P. Arnott; C. Mazzoleni; M. K. Dubey; C. E. Wold; W. M. Hao; S. M. Kreidenweis

    2010-01-01

    We report the direct observation of laboratory production of spherical, carbonaceous particles - "tar balls" - from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Angstrom coefficients (AAC) indicate that a class of light absorbing organic carbon (OC) with wavelength dependent...

  3. Magnetic resonance elastography using an air ball-actuator.

    Science.gov (United States)

    Numano, Tomokazu; Kawabata, Yoshihiko; Mizuhara, Kazuyuki; Washio, Toshikatsu; Nitta, Naotaka; Homma, Kazuhiro

    2013-07-01

    The purpose of this study was to develop a new technique for a powerful compact MR elastography (MRE) actuator based on a pneumatic ball-vibrator. This is a compact actuator that generates powerful centrifugal force vibrations via high speed revolutions of an internal ball using compressed air. This equipment is easy to handle due to its simple principles and structure. Vibration frequency and centrifugal force are freely adjustable via air pressure changes (air flow volume), and replacement of the internal ball. In order to achieve MRI compatibility, all parts were constructed from non-ferromagnetic materials. Vibration amplitudes (displacements) were measured optically by a laser displacement sensor. From a bench test of displacement, even though the vibration frequency increased, the amount of displacement did not decrease. An essential step in MRE is the generation of mechanical waves within tissue via an actuator, and MRE sequences are synchronized to several phase offsets of vibration. In this system, the phase offset was detected by a four-channel optical-fiber sensor, and it was used as an MRI trigger signal. In an agarose gel phantom experiment, this actuator was used to make an MR elastogram. This study shows that the use of a ball actuator for MRE is feasible. Copyright © 2013 Elsevier Inc. All rights reserved.

  4. Molecular Similarity Based on Super-Ball Algorithm

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The molecular similarity of 139 organic compounds was calculated by the topologic index method, the flexible super-ball algorithm was used to scan similar molecules and structures. The results show that the properties of organic compounds estimated from this method are reliable.

  5. LINEAR SINGULAR INTEGRAL EQUATION ON DOMAINS COMPOSED BY BALLS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    For domains composed by balls in Cn, this paper studies the boundary behaviour of Cauchy type integrals with discrete holomorphic kernels and the corresponding linear singular integral equation on each piece of smooth lower dimensional edges on the boundary of the domain.

  6. Thump, ring: the sound of a bouncing ball

    Energy Technology Data Exchange (ETDEWEB)

    Katz, J I, E-mail: katz@wuphys.wustl.ed [Department of Physics and McDonnell Center for the Space Sciences, Washington University, St Louis, MO 63130 (United States)

    2010-07-15

    A basketball bounced on a stiff surface produces a characteristic loud thump, followed by a high-pitched ringing. Describing the ball as an inextensible but flexible membrane containing compressed air, I formulate an approximate theory of the generation of these sounds and predict their amplitudes and waveforms.

  7. Thump, ring: the sound of a bouncing ball

    CERN Document Server

    Katz, J I

    2008-01-01

    A basketball bounced on a stiff surface produces a characteristic loud thump, followed by high-pitched ringing. Describing the ball as an inextensible but flexible membrane containing compressed air, I formulate an approximate theory of the generation of these sounds and predict their amplitudes and waveforms.

  8. Application of the Blobo bluetooth ball in wrist rehabilitation training.

    Science.gov (United States)

    Hsieh, Wei-Min; Hwang, Yuh-Shyan; Chen, Shih-Ching; Tan, Sun-Yen; Chen, Chih-Chen; Chen, Yu-Luen

    2016-01-01

    [Purpose] The introduction of emerging technologies such as the wireless Blobo bluetooth ball with multimedia features can enhance wrist physical therapy training, making it more fun and enhancing its effects. [Methods] Wrist injuries caused by fatigue at work, improper exercise, and other conditions are very common. Therefore, the reconstruction of wrist joint function is an important issue. The efficacy of a newly developed integrated wrist joint rehabilitation game using a Blobo bluetooth ball with C# software installed was tested in wrist rehabilitation (Flexion, Extension, Ulnar Deviation, Radial Deviation). [Results] Eight subjects with normal wrist function participated in a test of the system's stability and repeatability. After performing the Blobo bluetooth ball wrist physical therapy training, eight patients with wrist dysfunction experienced approximately 10° improvements in range of motion (ROM) of flexion extension, and ulnar deviation and about 6° ROM improvement in radial deviation. The subjects showed progress in important indicators of wrist function. [Conclusion] This study used the Blobo bluetooth ball in wrist physical therapy training and the preliminary results were encouraging. In the future, more diverse wrist or limb rehabilitation games should be developed to meet the needs of physical therapy training.

  9. High performance amorphous-Si@SiOx/C composite anode materials for Li-ion batteries derived from ball-milling and in situ carbonization

    Science.gov (United States)

    Wang, Dingsheng; Gao, Mingxia; Pan, Hongge; Wang, Junhua; Liu, Yongfeng

    2014-06-01

    Amorphous-Si@SiOx/C composites with amorphous Si particles as core and coated with a double layer of SiOx and carbon are prepared by ball-milling crystal micron-sized silicon powders and carbonization of the citric acid intruded in the ball-milled Si. Different ratios of Si to citric acid are used in order to optimize the electrochemical performance. It is found that SiOx exists naturally at the surfaces of raw Si particles and its content increases to ca. 24 wt.% after ball-milling. With an optimized Si to citric acid weight ratio of 1/2.5, corresponding to 8.4 wt.% C in the composite, a thin carbon layer is coated on the surfaces of a-Si@SiOx particles, moreover, floc-like carbon also forms and connects the carbon coated a-Si@SiOx particles. The composite provides a capacity of 1450 mA h g-1 after 100 cycles at a current density of 100 mA g1, and a capacity of 1230 mA h g-1 after 100 cycles at 500 mA g1 as anode material for lithium-ion batteries. Effects of ball-milling and the addition of citric acid on the microstructure and electrochemical properties of the composites are revealed and the mechanism of the improvement in electrochemical properties is discussed.

  10. Influence of Process Control Agent on Characterization and Structure of Micron Chitosan Powders Prepared by Ball Milling Method

    Directory of Open Access Journals (Sweden)

    ZHANG Chuan-jie

    2016-12-01

    Full Text Available With ethyl alcohol or distilled water as process control agent (PCA, micron chitosan powder was prepared by ball milling method. The yield rate, particle size distribution, micro morphology, viscosity average molecular mass, chemical and crystal structures, and thermal properties of these different micron chitosan powders were measured. The results indicate that the yield rate of micron chitosan powders prepared with ethyl alcohol as PCA increases significantly, and improves to 94.7% from 25% while the amount of ethyl alcohol is 0.75mL/g. The particle size distribution of micron chitosan powder prepared with ethyl alcohol as PCA is concentrated, while the D50 and D90 in size are 824nm and 1629nm respectively. Chitosan do not react with ethyl alcohol used as PCA, but the viscosity average molecular mass of prepared micron chitosan powder decreases by 23%, the crystal structures are destroyed slightly, and its thermal stability is slightly weakened.

  11. Ball Bearings Equipped for In Situ Lubrication on Demand

    Science.gov (United States)

    Marchetti, Mario; Jones, William R., Jr.; Pepper, Stephen V.; Jansen, Mark; Predmore, Roamer

    2005-01-01

    In situ systems that provide fresh lubricants to ball/race contacts on demand have been developed to prolong the operational lives of ball bearings. These systems were originally intended to be incorporated into ball bearings in mechanisms that are required to operate in outer space for years, in conditions in which lubricants tend to deteriorate and/or evaporate. These systems may also be useful for similarly prolonging bearing lifetimes on Earth. Reservoirs have been among the means used previously to resupply lubricants. Lubricant- resupply reservoirs are bulky and add complexity to bearing assemblies. In addition, such a reservoir cannot be turned on or off as needed: it supplies lubricant continuously, often leading to an excess of lubricant in the bearing. A lubricator of the present type includes a porous ring cartridge attached to the inner or the outer ring of a ball bearing (see Figure 1). Oil is stored in the porous cartridge and is released by heating the cartridge: Because the thermal expansion of the oil exceeds that of the cartridge, heating causes the ejection of some oil. A metal film can be deposited on a face of the cartridge to serve as an electrical-resistance heater. The heater can be activated in response to a measured increase in torque that signals depletion of oil from the bearing/race contacts. Because the oil has low surface tension and readily wets the bearing-ring material, it spreads over the bearing ring and eventually reaches the ball/race contacts. The Marangoni effect (a surface-tension gradient associated with a temperature gradient) is utilized to enhance the desired transfer of lubricant to the ball/race contacts during heating. For a test, a ball bearing designed for use at low speed was assembled without lubricant and equipped with a porous-ring lubricator, the resistance heater of which consumed a power of less than 1 W when triggered on by a torque-measuring device. In the test, a load of 20 lb (.89 N) was applied and the

  12. 27 CFR 25.293 - Record of ballings and alcohol content.

    Science.gov (United States)

    2010-04-01

    ... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Records and Reports § 25.293 Record of ballings... the ballings and the alcohol content of beer and cereal beverage transferred for bottling and racking, between breweries in bulk conveyances, and to pilot brewing plants. Records showing ballings and alcohol...

  13. Rolling Motion of a Ball Spinning about a Near-Vertical Axis

    Science.gov (United States)

    Cross, Rod

    2012-01-01

    A ball that is projected forward without spin on a horizontal surface will slide for a short distance before it starts rolling. Sliding friction acts to decrease the translation speed v and it acts to increase the rotation speed [omega]. When v = R[omega], where R is the ball radius, the ball will start rolling and the friction force drops almost…

  14. Rolling Motion of a Ball Spinning about a Near-Vertical Axis

    Science.gov (United States)

    Cross, Rod

    2012-01-01

    A ball that is projected forward without spin on a horizontal surface will slide for a short distance before it starts rolling. Sliding friction acts to decrease the translation speed v and it acts to increase the rotation speed [omega]. When v = R[omega], where R is the ball radius, the ball will start rolling and the friction force drops almost…

  15. Visual Illusions and the Control of Ball Placement in Goal-Directed Hitting

    Science.gov (United States)

    Caljouw, Simone R.; Van der Kamp, John; Savelsbergh, Geert J. P.

    2010-01-01

    When hitting, kicking, or throwing balls at targets, online control in the target area is impossible. We assumed this lack of late corrections in the target area would induce an effect of a single-winged Muller-Lyer illusion on ball placement. After extensive practice in hitting balls to different landing locations, participants (N = 9) had to hit…

  16. Visual Illusions and the Control of Ball Placement in Goal-Directed Hitting

    NARCIS (Netherlands)

    Caljouw, Simone R.; Van der Kamp, John; Savelsbergh, Geert J. P.

    2010-01-01

    When hitting, kicking, or throwing balls at targets, online control in the target area is impossible We assumed this lack of late corrections in the target area would induce an effect of a single-winged Muller-Lyer illusion on ball placement After extensive practice in hitting balls to different lan

  17. 78 FR 29702 - Ball Bearings and Parts Thereof From Germany: Final Results of Antidumping Duty Administrative...

    Science.gov (United States)

    2013-05-21

    ... International Trade Administration Ball Bearings and Parts Thereof From Germany: Final Results of Antidumping... order on ball bearings and parts thereof from Germany. The period of review (POR) is May 1, 2011... September 15, 2011, the Department revoked the order on ball bearings and parts thereof from Germany as...

  18. 76 FR 10335 - Ball Bearings and Parts Thereof From Germany: Initiation of Antidumping Duty Changed...

    Science.gov (United States)

    2011-02-24

    ... International Trade Administration Ball Bearings and Parts Thereof From Germany: Initiation of Antidumping Duty...-circumstances review of the antidumping duty order on ball bearings and parts thereof from Germany with respect... parts thereof from Germany on May 15, 1989. See Antidumping Duty Orders: Ball Bearings,...

  19. Synthesis of magnetically exchange coupled SrFe12O19/FeCo composites through cryogenic ball milling

    Science.gov (United States)

    Pang, Ning; Ye, Feng; Jiang, Ying

    2017-07-01

    SrFe12O19/FeCo composite particles with different mass ratios of SrFe12O19 to FeCo were synthesized through a cryogenic ball milling process. The corresponding products were characterized with scanning electron microscopy (SED), transmission electron microscopy (TEM), x-ray diffraction (XRD) and vibrating sample magnetometer (VSM) for crystal morphology, elemental distribution, crystal phases, and magnetic properties. The results showed that when the mass percentage of FeCo was less than 15%, smooth magnetic hysteresis loops could be obtained from SrFe12O19/FeCo composite particles, indicating effective magnetic exchange coupling between the SrFe12O19 and FeCo particles. A further FeCo mass increase resulted in kinks in the magnetic hysteresis loop and destroyed the magnetic exchange coupling. As a comparison, room temperature ball milling of SrFe12O19/FeCo (95/5 wt%) cannot achieve magnetic exchange coupling between SrFe12O19 and FeCo due to FeCo nanoparticle agglomeration.

  20. Effects of Caffeine Supplementation on Performance in Ball Games.

    Science.gov (United States)

    Chia, Jingyi Shannon; Barrett, Laura Ann; Chow, Jia Yi; Burns, Stephen Francis

    2017-07-24

    Although a large body of evidence exists documenting the ergogenic properties of caffeine, most studies have focused on endurance performance. However, findings from endurance sports cannot be generalized to performance in ball games where, apart from having a high level of endurance, successful athletic performances require a combination of physiological, technical and cognitive capabilities. The purpose of this review was to critically evaluate studies that have examined the effect of a single dose of caffeine in isolation on one or more of the following performance measures: total distance, sprint performance, agility, vertical jump performance and accuracy in ball games. Searches of three major databases resulted in 19 studies (invasion games: 13; net-barrier games: 6) that evaluated the acute effects of caffeine on human participants, provided the caffeine dose administered, and included a ball games specific task or simulated match. Improvements in sprint performance were observed in 8 of 10 studies (80%), and vertical jump in 7 of 8 studies (88%). Equivocal results were reported for distance covered, agility and accuracy. Minor side effects were reported in 4 of 19 studies reviewed. Pre-exercise caffeine ingestion between 3.0 and 6.0 mg/kg of body mass appears to be a safe ergogenic aid for athletes in ball games. However, the efficacy of caffeine varies depending on various factors, including, but not limited to, the nature of the game, physical status and caffeine habituation. More research is warranted to clarify the effects of caffeine on performance measures unique to ball games, such as agility and accuracy. It is essential that athletes, coaches and practitioners evaluate the risk-benefit ratio of caffeine ingestion strategies on an individual case-by-case basis.

  1. Historiografia del “Ball de Torrent”: De la moixiganga barroca al quadre de balls populars valencians (1692-1929

    Directory of Open Access Journals (Sweden)

    Raül Sanchis Francés

    2013-06-01

    Full Text Available Resum: El Ball de Torrent és una moixiganga dramàtica popular escenificada a la ciutat de València i altres indrets del País Valencià des de finals del segle XVII fins a principis del segle XX. Estava organitzada per agrupacions gremials, juntes d’hospitals o clavaris de festes i protagonitzada per personatges agrupats en comparses que representaven una paròdia sobre les relacions entre les estructures de poder i les classes populars. Tot i la variabilitat segons el moment històric, es conforma com una mescla de quadres amb danses, música i jocs teatrals. El ball interacciona de diverses formes amb algunes festes valencianes i és, probablement, una de les mostres de teatre de carrer més nostrades i menys estudiades de la València Moderna. En aquest article es realitza una revisió bibliogràfica crítica i una primera anàlisi historiogràfica.Paraules clau: Ball de Torrent, Dansa i música tradicional, Teatre, Moixiganga, Festa valencianaAbstract: Ball de Torrent (Dance of Torrent is a popular dramatic masquerade staged in Valencia since the late seventeenth century to the early twentieth. It was organized by guilds, hospital managements or festival organizers. The actors were grouped in associations representing a parody on the relationships between power structures and popular classes. Despite the variability depending on the historical period, it consisted of a mixture of episodes or scenes with dance, music and theatre games. Any Festivals in Valencia are connected with the Ball de Torrent. It’s probably one of the most interesting samples of street theatre and studied under of the Modern Valencia. This paper analyses historical sources to review and critique bibliography.Keywords: Dance of Torrent, Traditional Dance and Music, Theatre, Masquerade, Feasts of Valencia

  2. Ball-milled sulfur-doped graphene materials contain metallic impurities originating from ball-milling apparatus: their influence on the catalytic properties.

    Science.gov (United States)

    Chua, Chun Kiang; Sofer, Zdeněk; Khezri, Bahareh; Webster, Richard D; Pumera, Martin

    2016-07-21

    Graphene materials have found applications in a wide range of devices over the past decade. In order to meet the demand for graphene materials, various synthesis methods are constantly being improved or invented. Ball-milling of graphite to obtain graphene materials is one of the many versatile methods to easily obtain bulk quantities. In this work, we show that the graphene materials produced by ball-milling are spontaneously contaminated with metallic impurities originating from the grinding bowls and balls. Ball-milled sulfur-doped graphene materials obtained from two types of ball-milling apparatus, specifically made up of stainless steel and zirconium dioxide, were investigated. Zirconium dioxide-based ball-milled sulfur-doped graphene materials contain a drastically lower amount of metallic impurities than stainless steel-based ball-milled sulfur-doped graphene materials. The presence of metallic impurities is demonstrated by their catalytic effects toward the electrochemical catalysis of hydrazine and cumene hydroperoxide. The general impression toward ball-milling of graphite as a versatile method for the bulk production of 'metal-free' graphene materials without the need for post-processing and the selection of ball-milling tools should be cautioned. These findings would have wide-reaching implications for graphene research.

  3. A Novel Low-Torque Ball Re-Positioning Scheme Based on a Sliding-Mode Ball Observer for an Automatic Balancer System

    Directory of Open Access Journals (Sweden)

    Paul C.-P. Chao

    2008-01-01

    Full Text Available A novel low-torque ball re-positioning scheme based on a sliding-mode ball observer is developed in this study with the aim to precisely reside the rolling ball inside an automatic balancer system (ABS to its desired position – 180 degree opposite to the inherent imbalance of the rotating system which the ABS is attached to. In this way, the ABS is capable of substantially reducing radial vibrations of the rotating system for a decent balancing. For preliminary feasibility, the case of a single ball is considered in this study. The first step is to establish the dynamic model of the system, which is followed by the analysis to ensure stability of the desired ball position. The second step is to forge a sliding-mode observer for estimating on-line position and velocity of the ball. With ball estimation capability, a low-torque speed regulator that essentially generates a series of speed drops to the neighborhood of suspension resonance is proposed to overcome practical ball rolling friction for residing the ball at the desired position. The design characteristic of low-torque required for the regulator is particularly suited to most of commercial spindle motors which can only output limited torques at high speeds. Finally, simulations and experiments are conducted for a benchmark problem of optical disc drives in order to verify the effectiveness of the proposed scheme of the sliding-mode observer and the low-torque speed regulator.

  4. Formation of ZnMn{sub 2}O{sub 4} ball-in-ball hollow microspheres as a high-performance anode for lithium-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Genqiang; Lou, Xiong Wen [TUM-CREATE Centre for Electromobility, Singapore (Singapore); School of Chemical and Biomedical Engineering, Nanyang Technological University (Singapore); Yu, Le; Wu, Hao Bin [School of Chemical and Biomedical Engineering, Nanyang Technological University (Singapore); Hoster, Harry E. [TUM-CREATE Centre for Electromobility, Singapore (Singapore)

    2012-09-04

    Novel ZnMn{sub 2}O{sub 4} ball-in-ball hollow microspheres are fabricated by a facile two-step method involving the solution synthesis of ZnMn-glycolate hollow microspheres and subsequent thermal annealing in air. When evaluated as an anode material for lithium-ion batteries, these ZnMn{sub 2}O{sub 4} ball-in-ball hollow microspheres show significantly enhanced electrochemical performance with high capacity, excellent cycling stability and good rate capability. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  5. Tribological Properties of Biodegradable Lubricating Oils in Four-Ball Test

    OpenAIRE

    中迫, 正一; 灘野,宏正; 河野,正来; 南, 一郎

    2004-01-01

    To clarify the tribological properties of biodegradable lubricating oils, the four-ball tests were carried out under dip-feed lubrication using a Soda-type four-ball machine. The test balls were lubricated with soybean oil, rapeseed oil, corn oil and turbine oil. From the tests, the coefficient of friction for all the test balls lubricated with biodegradable lubricating oils was lower than that for the test ball lubricated with turbine oil. Further, from the calculation of the pV value, it wa...

  6. A new principle and device for large aircraft components gaining accurate support by ball joint

    Institute of Scientific and Technical Information of China (English)

    Bao-gui QIU; Jun-xia JIANG; Ying-lin KE

    2011-01-01

    How to obtain an accurate support for large components by ball joint is a key process in aircraft digital assembly. A novel principle and device is developed to solve the problem. Firstly, the working principle of the device is introduced. When three or four displacement sensors installed in the localizer are touched by the ball-head, the spatial relation is calculated between the large aircraft component's ball-head and the localizer's ball-socket. The localizer is driven to achieve a new position by compensation. Relatively, a support revising algorithm is proposed. The localizer's ball-socket approaches the ball-head based on the displacement sensors. According to the points selected from its spherical surface, the coordinates of ball-head spherical center are computed by geometry. Finally, as a typical application, the device is used to conduct a test-fuselage's ball-head into a localizer's ball-socket. Positional deviations of the spherical centers between the ball-head and the ball-socket in the x, y, and z directions are all controlled within ±0.05 mm under various working conditions. The results of the experiments show that the device has the characteristics of high precision, excellent stability, strong operability, and great potential to be applied widely in the modern aircraft industry.

  7. Trajectory-based ball detection and tracking with aid of homography in broadcast tennis video

    Science.gov (United States)

    Yu, Xinguo; Jiang, Nianjuan; Ang, Ee Luang

    2007-01-01

    Ball-detection-and-tracking in broadcast tennis video (BTV) is a crucial but challenging task in tennis video semantics analysis. Informally, the challenges are due to camera motion and the other causes such as the presence of many ball-like objects and the small size of the tennis ball. The trajectory-based approach proposed by us in our previous papers mainly counteracted the challenges imposed by causes other than camera motion and achieves a good performance. This paper proposes an improved trajectory-based ball detection and tracking algorithm in BTV with the aid of homography, which counteracts the challenges caused by camera motion and bring us multiple new merits. Firstly, it acquires an accurate homography, which transforms each frame into the "standard" frame. Secondly, it achieved higher accuracy of ball identification. Thirdly, it obtains the ball projection position in the real world, instead of ball location in the image. Lastly, it also identifies landing frames and positions of the ball. The experimental results show that the improved algorithm can obtain not only higher accuracy in ball identification and in ball position alike, but also ball landing frames and positions. With the intent of using homography to improve the video-based event detection for smart home we also do some experiments on acquiring the homography for home surveillance video.

  8. An investigation of the corrosive wear of steel balls in grinding of sulphide ores

    Directory of Open Access Journals (Sweden)

    Asghar Azizi

    2015-06-01

    Full Text Available Ball mills are common grinding equipment in mineral processing industries. Ball wear results from three mechanisms namely impact, abrasion and corrosion. Of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. Therefore, the aims of this research were to investigate the grinding chemistry influence (slurry pH, solid percentage, water chemistry and gas purging on corrosive wear of steel balls and to determine the contribution of corrosion mechanism to total wear of steel balls. The results indicated that the mass losses of steel balls could be reduced considerably by controlling the pulp chemistry inside the mill. In addition, the results showed that 73.51% of the corrosion products are generated from the oxidation of steel balls. It was also estimated that the corrosion mechanism accounts for 26.68% of the total wear of steel balls.

  9. CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations

    Directory of Open Access Journals (Sweden)

    Abdul Syakir Abdul Mubin

    2015-01-01

    Full Text Available There have been a significant number of researches on computational fluid dynamic (CFD analysis of balls used in sports such as golf balls, tennis balls, and soccer balls. Sepak takraw is a high speed court game predominantly played in Southeast Asia using mainly the legs and head. The sepak takraw ball is unique because it is not enclosed and made of woven plastic. Hence a study of its aerodynamicswould give insight into its behaviour under different conditions of play. In this study the dynamics of the fluid around a static sepak takraw ball was investigated at different wind speeds for three different orientations using CFD. It was found that although the drag did not differ very much, increasing the wind velocity causes an increase in drag. The lift coefficientvaries as the velocity increases and does not show a regular pattern. The drag and lift coefficients are influenced by the orientation of the sepak takraw ball.

  10. The Dual Functionals for the Generalized Ball Basis of Wang-Said Type and Basis Transformation Formulas

    Institute of Scientific and Technical Information of China (English)

    Ping Jiang; Hongyi Wu; Jieqing Tan

    2006-01-01

    The generalized Ball curves of Wang-Said type with a position parameter L not only unify the Wang-Ball curves and the Said-Ball curves, but also include several useful intermediate curves. This paper presents the dual functionals for the generalized Ball basis of Wang-Said type. The relevant basis transformation formulae are also worked out.

  11. Slepian Spatial-Spectral Concentration on the Ball

    CERN Document Server

    Khalid, Zubair; McEwen, Jason D

    2014-01-01

    We formulate and solve the Slepian spatial-spectral concentration problem on the three-dimensional ball. Both the standard Fourier-Bessel and also the Fourier-Laguerre spectral domains are considered since the latter exhibits a number of practical advantages (spectral decoupling and exact computation). The Slepian spatial and spectral concentration problems are formulated as eigenvalue problems, the eigenfunctions of which form an orthogonal family of concentrated functions. Equivalence between the spatial and spectral problems is shown. The spherical Shannon number on the ball is derived, which acts as the analog of the space-bandwidth product in the Euclidean setting, giving an estimate of the number of concentrated eigenfunctions and thus the dimension of the space of functions that can be concentrated in both the spatial and spectral domains simultaneously. Various symmetries of the spatial region are considered that reduce considerably the computational burden of recovering eigenfunctions, either by deco...

  12. Fuzzy Logic Control of a Ball on Sphere System

    Directory of Open Access Journals (Sweden)

    Seyed Alireza Moezi

    2014-01-01

    Full Text Available The scope of this paper is to present a fuzzy logic control of a class of multi-input multioutput (MIMO nonlinear systems called “system of ball on a sphere,” such an inherently nonlinear, unstable, and underactuated system, considered truly to be two independent ball and wheel systems around its equilibrium point. In this work, Sugeno method is investigated as a fuzzy controller method, so it works in a good state with optimization and adaptive techniques, which makes it very attractive in control problems, particularly for such nonlinear dynamic systems. The system’s dynamic is described and the equations are illustrated. The outputs are shown in different figures so as to be compared. Finally, these simulation results show the exactness of the controller’s performance.

  13. Generalized isoperimetric inequalities for extrinsic balls in minimal submanifolds

    DEFF Research Database (Denmark)

    Markvorsen, Steen; Palmer, Vicente

    2002-01-01

    The volume of an extrinsic ball in a minimal submanifold has a well defined lower bound when the ambient manifold has an upper bound on its sectional curvatures, see e.g. [2] and [10]. When this upper bound is non-positive, the second named author has shown an isoperimetric inequality for such do......The volume of an extrinsic ball in a minimal submanifold has a well defined lower bound when the ambient manifold has an upper bound on its sectional curvatures, see e.g. [2] and [10]. When this upper bound is non-positive, the second named author has shown an isoperimetric inequality...... for such domains, see [11]. This result again gives the comparison result for volumes alluded to above together with a characterization of the totally geodesic submanifolds of hyperbolic space forms. In the present paper we find a corresponding sharp isoperimetric inequality for minimal submanifolds in spaces...

  14. VOLUME DEFECT FATIGUE FAILURE OF CERAMIC BALLS UNDER ROLLING CONDITION

    Institute of Scientific and Technical Information of China (English)

    ZHOU Jingling; WU Guoqing; CHEN Xiaoyang

    2007-01-01

    A newly developed pure rolling fatigue test rig with three contact points is used to test the rolling contact fatigue properties of silicon nitride ceramic balls. Ball surfaces are examined after failure with optical microscopy and scanning electron microscopy. The failure cause, fatigue phenomenon and mechanics are analyzed. The research shows that subsurface cracks play a dominant role in the formation of spalling failure. These cracks originated from volume defects of the material and propagate, to form elliptical fatigue spalls under the action of principal tensile stresses. The principal tensile stress increases with increasing contact load, causing spall formation and reduction of rolling contact life. The greater the principal tensile stress is, the more severe the peeling of near surface is. Under the same condition, the closer volume defects are to the surface, the more likely failure occurs, the shorter the rolling contact life is.

  15. Entanglement and the three-dimensionality of the Bloch ball

    Energy Technology Data Exchange (ETDEWEB)

    Masanes, Ll., E-mail: ll.masanes@gmail.com [Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT (United Kingdom); Müller, M. P. [Institut für Theoretische Physik, Universität Heidelberg, Philosophenweg 19, D-69120 Heidelberg (Germany); Pérez-García, D. [Departamento de Analisis Matematico and IMI, Universidad Complutense de Madrid, 28040 Madrid (Spain); Augusiak, R. [ICFO-Institut de Ciencies Fotoniques, 08860 Castelldefels, Barcelona (Spain)

    2014-12-15

    We consider a very natural generalization of quantum theory by letting the dimension of the Bloch ball be not necessarily three. We analyze bipartite state spaces where each of the components has a d-dimensional Euclidean ball as state space. In addition to this, we impose two very natural assumptions: the continuity and reversibility of dynamics and the possibility of characterizing bipartite states by local measurements. We classify all these bipartite state spaces and prove that, except for the quantum two-qubit state space, none of them contains entangled states. Equivalently, in any of these non-quantum theories, interacting dynamics is impossible. This result reveals that “existence of entanglement” is the requirement with minimal logical content which singles out quantum theory from our family of theories.

  16. Accurate and efficient maximal ball algorithm for pore network extraction

    Science.gov (United States)

    Arand, Frederick; Hesser, Jürgen

    2017-04-01

    The maximal ball (MB) algorithm is a well established method for the morphological analysis of porous media. It extracts a network of pores and throats from volumetric data. This paper describes structural modifications to the algorithm, while the basic concepts are preserved. Substantial improvements to accuracy and efficiency are achieved as follows: First, all calculations are performed on a subvoxel accurate distance field, and no approximations to discretize balls are made. Second, data structures are simplified to keep memory usage low and improve algorithmic speed. Third, small and reasonable adjustments increase speed significantly. In volumes with high porosity, memory usage is improved compared to classic MB algorithms. Furthermore, processing is accelerated more than three times. Finally, the modified MB algorithm is verified by extracting several network properties from reference as well as real data sets. Runtimes are measured and compared to literature.

  17. A Novel Ball on Beam Stabilizing Platform with Inertial Sensors

    Directory of Open Access Journals (Sweden)

    Ali Shahbaz Haider

    2015-08-01

    Full Text Available This research paper presents dynamic modeling of inertial sensor based one degree of freedom (1-DoF stabilizing platform. Plant is a ball on a pivoted beam. Nonlinear modeling of the plant is done. Ball position on beam is actuated by DC motor using two arms and one beam structure. Arms and beam are linked by pivoted joints. Nonlinear geometrical relations for mechanical structure are derived followed by physically realizable approximations. These relations are used in system dynamic equations followed by linearization, resulting in a linear continuous time differential equation model. State space conversion is done. Final model is simulation and system dynamics are elaborated by analysis of the simulation responses

  18. Ball-thrower's fracture of the humerus

    Energy Technology Data Exchange (ETDEWEB)

    Callaghan, Eric B.; Bennett, D. Lee; El-Khoury, Georges Y.; Ohashi, Kenjirou [Department of Radiology, University of Iowa Hospitals and Clinics, 200 Hawkins Drive, IA 52242, Iowa City (United States)

    2004-06-01

    A relatively rare case of ball-thrower's fracture of the humerus is presented. Severe muscular action is an uncommon cause of humeral fractures but has been well documented in the orthopedic literature. To our knowledge, this fracture has not been described in the radiology literature, and awareness of this entity could preclude further unnecessary workup. The mechanism of injury and its typical radiographic appearance is described. (orig.)

  19. Integrable discretization and deformation of the nonholonomic Chaplygin ball

    Science.gov (United States)

    Tsiganov, Andrey V.

    2017-07-01

    The rolling of a dynamically balanced ball on a horizontal rough table without slipping was described by Chaplygin using Abel quadratures. We discuss integrable discretizations and deformations of this nonholonomic system using the same Abel quadratures. As a by-product one gets a new geodesic flow on the unit two-dimensional sphere whose additional integrals of motion are polynomials in the momenta of fourth order.

  20. Efficacy of birth ball exercises on labour pain management.

    Science.gov (United States)

    Leung, R W C; Li, J F P; Leung, M K M; Fung, B K Y; Fung, L C W; Tai, S M; Sing, C; Leung, W C

    2013-10-01

    To evaluate the efficacy of a birth ball exercise programme conducted by physiotherapists on pain relief, psychological care, and facilitation of the labour process at a labour ward in a regional hospital. Case series with before-after comparisons. Kwong Wah Hospital, Hong Kong. Chinese women admitted to the labour ward for spontaneous vaginal delivery between April and August 2012 were recruited. Physiotherapists taught birth ball exercises in groups or individually for 30 minutes. Labour pain intensity, back pain intensity, frequency of labour pain, stress and anxiety levels, and subjective pressure level over the lower abdomen were captured before and after birth ball exercises. Most of the parameters were measured using self-reported visual analogue scales. After the exercise session, physiotherapists measured the women's satisfaction level. Midwives recorded pethidine usage. A total of 203 pregnant women participated in this programme; 181 were in the latent phase group, whereas 22 were categorised into the no-labour-pain group. In both groups, there were statistically and clinically significant differences in back pain level, stress and anxiety levels, as well as pressure level over the lower abdomen before and after the exercise (Plabour pain and frequency of labour pain were demonstrated. Mean satisfaction scores were high, with visual analogue scale scores higher than 8.2 in both groups. Pethidine usage showed a further decreasing trend (6.4%) compared with the past 2 years. Birth ball exercise could be an alternative means of relieving back pain and labour pain in the labour ward, and could decrease pethidine consumption in labouring women.

  1. Casimir Energy and Vacua vor Superconducting Ball in Supergravity

    CERN Document Server

    Burinskii, A

    2002-01-01

    Casimir energy for solid conducting ball is considered on the base of some finite models. One model is physical and built of a battery of parallel metallic plates. Two finite models are based on the Higgs model of superconductivity. One of them is supersymmetric and based on the Witten field model for superconducting strings. Treatment shows that contribution of Casimir energy can be very essential for superdence state in the neutron stars and nuclear matter.

  2. Simulation of distribution of radiation energy density in water balls

    Institute of Scientific and Technical Information of China (English)

    TANG Shi-Biao; MA Qing-Li; YIN Ze-Jie; TANG Yu; HUANG Huan; RAO Nan-Xia; ZHU Da-Ming

    2005-01-01

    The distribution of energy deposition density in radiate region and its surrounding areas from γ-rays was simulated and analyzed for a water-ball model with Geant4 package ( Geant4.7.0,2005 ) developed by CERN (the Center of European Research of Nucleus). The results show that the distribution depends strongly on the collimating condition of radiation beam. A well-collimated beam would reduce radiation effects on surrounding areas.

  3. Calculation Method for Media in Ball Mills by Layers

    Institute of Scientific and Technical Information of China (English)

    徐志强; 张荣曾; 曾鸣

    2002-01-01

    Based on analyzing the moving principle of media in ball mill, it is implicated that there is the significant difference of movement situation among each single layer. A new method to calculate each single was put forward. The results from lab experiment and actual data from 26 sets industrial mills state indicate that the new calculation method reaches the high accuracy with excellent practicab ility.

  4. Axion Crystals

    CERN Document Server

    Ozaki, Sho

    2016-01-01

    The low-energy effective theories for gapped insulators are classified by three parameters: permittivity $\\epsilon$, permeability $\\mu$, and theta angle $\\theta$. Crystals with periodic $\\epsilon$ are known as photonic crystals. We here study the band structure of photons in a new type of crystals with periodic $\\theta$ (modulo $2\\pi$) in space, which we call the axion crystals. We find that the axion crystals have a number of new properties that the usual photonic crystals do not possess, such as the helicity-dependent photonic band gaps and the nonrelativistic gapless dispersion relation at small momentum. We briefly discuss possible realizations of axion crystals in condensed matter systems as well as high-energy physics.

  5. A facile strategy for rapid preparation of graphene spongy balls

    Science.gov (United States)

    Wan, Shu; Bi, Hengchang; Xie, Xiao; Su, Shi; Du, Kai; Jia, Haiyang; Xu, Tao; He, Longbing; Yin, Kuibo; Sun, Litao

    2016-09-01

    Porous three dimensional (3D) graphene macrostructures have demonstrated the potential in versatile applications in recent years, including energy storage, sensors, and environment protection, etc. However, great research attention has been focused on the optimization of the structure and properties of graphene-based materials. Comparatively, there are less reports on how to shape 3D graphene macrostructures rapidly and effortlessly, which is critical for mass production in industry. Here, we introduce a facile and efficient method, low temperature frying to form graphene-based spongy balls in liquid nitrogen with a yield of ~400 balls min‑1. Moreover, the fabrication process can be easily accelerated by using multi pipettes working at the same time. The graphene spongy balls show energy storage with a specific capacitance of 124 F g‑1 and oil adsorbing with a capacity of 105.4 times its own weight. This strategy can be a feasible approach to overcome the low efficiency in production and speed up the development of porous 3D graphene-based macrostructures in industrial applications.

  6. Surface Integrity of Inconel 718 by Ball Burnishing

    Science.gov (United States)

    Sequera, A.; Fu, C. H.; Guo, Y. B.; Wei, X. T.

    2014-09-01

    Inconel 718 has wide applications in manufacturing mechanical components such as turbine blades, turbocharger rotors, and nuclear reactors. Since these components are subject to harsh environments such as high temperature, pressure, and corrosion, it is critical to improve the functionality to prevent catastrophic failure due to fatigue or corrosion. Ball burnishing as a low plastic deformation process is a promising technique to enhance surface integrity for increasing component fatigue and corrosion resistance in service. This study focuses on the experimental study on surface integrity of burnished Inconel 718. The effects of burnishing ball size and pressure on surface integrity factors such as surface topography, roughness, and hardness are investigated. The burnished surfaces are smoother than the as-machined ones. Surface hardness after burnishing is higher than the as-machined surfaces, but become stable over a certain burnishing pressure. There exists an optimal process space of ball sized and burnishing pressure for surface finish. In addition, surface hardness after burnishing is higher than the as-machined surfaces, which is confirmed by statistical analysis.

  7. Spatiotemporal characteristics of muscle patterns for ball catching

    Directory of Open Access Journals (Sweden)

    Mattia eD'Andola

    2013-08-01

    Full Text Available What sources of information and what control strategies the CNS uses to perform movements that require accurate sensorimotor coordination, such as catching a flying ball, is still debated. Here we analyzed the EMG waveforms recorded from 16 shoulder and elbow muscles in six subjects during catching of balls projected frontally from a distance of 6 m and arriving at two different heights and with three different flight times (550, 650, 750 ms. We found that a large fraction of the variation in the muscle patterns was captured by two time-varying muscle synergies, coordinated recruitment of groups of muscles with specific activation waveforms, modulated in amplitude and shifted in time according to the ball’s arrival height and flight duration. One synergy was recruited with a short and fixed delay from launch time. Remarkably, a second synergy was recruited at a fixed time before impact, suggesting that it is timed according to an accurate time-to-contact estimation. These results suggest that the control of interceptive movements relies on a combination of reactive and predictive processes through the intermittent recruitment of time-varying muscle synergies. Knowledge of the dynamic effect of gravity and drag on the ball may be then implicitly incorporated in a direct mapping of visual information into a small number of synergy recruitment parameters.

  8. Experimental Study on Voided Reinforced Concrete Beams with Polythene Balls

    Science.gov (United States)

    Sivaneshan, P.; Harishankar, S.

    2017-07-01

    The primary component in any structure is concrete, that exist in buildings and bridges. In present situation, a serious problems faced by construction industry is exhaustive use of raw materials. Recent times, various methods are being adopted to limit the use of concrete. In structural elements like beams, polythene balls can be induced to reduce the usage of concrete. A simply supported reinforced concrete beam has two zones, one above neutral axis and other below neutral axis. The region below neutral axis is in tension and above neutral axis is in compression. As concrete is weak in tension, steel reinforcements are provided in tension zone. The concrete below the neutral axis acts as a stress transfer medium between the compression zone and tension zone. The concrete above the neutral axis takes minimum stress so that we could partially replace the concrete above neutral axis by creating air voids using recycled polythene balls. Polythene balls of varying diameters of 75 mm, 65 mm and 35 mm were partially replaced in compression zone. Hence the usage of concrete in beams and self-weight of the beams got reduced considerably. The Load carrying capacity, Deflection of beams and crack patterns were studied and compared with conventional reinforced concrete beams.

  9. Brown carbon in tar balls from smoldering biomass combustion

    Directory of Open Access Journals (Sweden)

    R. K. Chakrabarty

    2010-03-01

    Full Text Available We report the direct observation of large-scale production of spherical, carbonaceous particles – "tar balls" – from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements indicate that brown carbon is an important component of tar balls. The spectrum of the imaginary parts of their complex refractive indices can be described with a Lorentzian-like model with an effective resonance wavelength in the ultraviolet (UV spectral region. Sensitivity calculations for aerosols containing traditional organic carbon (no absorption at visible and UV wavelengths and brown carbon suggest that accounting for UV absorption by brown carbon leads to a significant increase in aerosol radiative forcing efficiency and increased atmospheric warming. Since particles from smoldering combustion account for nearly three-fourths of the total carbonaceous aerosol mass emitted globally, inclusion of the optical properties of tar balls into radiative forcing models has significance for the Earth's radiation budget, optical remote sensing, and understanding of anomalous UV absorption in the troposphere.

  10. Brown carbon in tar balls from smoldering biomass combustion

    Directory of Open Access Journals (Sweden)

    R. K. Chakrabarty

    2010-07-01

    Full Text Available We report the direct observation of laboratory production of spherical, carbonaceous particles – "tar balls" – from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Ångström coefficients (AAC indicate that a class of light absorbing organic carbon (OC with wavelength dependent imaginary part of its refractive index – optically defined as "brown carbon" – is an important component of tar balls. The spectrum of the imaginary parts of their complex refractive indices can be described with a Lorentzian-like model with an effective resonance wavelength in the ultraviolet (UV spectral region. Sensitivity calculations for aerosols containing traditional OC (no absorption at visible and UV wavelengths and brown carbon suggest that accounting for near-UV absorption by brown carbon leads to an increase in aerosol radiative forcing efficiency and increased light absorption. Since particles from smoldering combustion account for nearly three-fourths of the total carbonaceous aerosol mass emitted globally, inclusion of the optical properties of tar balls into radiative forcing models has significance for the Earth's radiation budget, optical remote sensing, and understanding of anomalous UV absorption in the troposphere.

  11. Brown carbon in tar balls from smoldering biomass combustion

    Science.gov (United States)

    Chakrabarty, R. K.; Moosmüller, H.; Chen, L.-W. A.; Lewis, K.; Arnott, W. P.; Mazzoleni, C.; Dubey, M. K.; Wold, C. E.; Hao, W. M.; Kreidenweis, S. M.

    2010-07-01

    We report the direct observation of laboratory production of spherical, carbonaceous particles - "tar balls" - from smoldering combustion of two commonly occurring dry mid-latitude fuels. Real-time measurements of spectrally varying absorption Ångström coefficients (AAC) indicate that a class of light absorbing organic carbon (OC) with wavelength dependent imaginary part of its refractive index - optically defined as "brown carbon" - is an important component of tar balls. The spectrum of the imaginary parts of their complex refractive indices can be described with a Lorentzian-like model with an effective resonance wavelength in the ultraviolet (UV) spectral region. Sensitivity calculations for aerosols containing traditional OC (no absorption at visible and UV wavelengths) and brown carbon suggest that accounting for near-UV absorption by brown carbon leads to an increase in aerosol radiative forcing efficiency and increased light absorption. Since particles from smoldering combustion account for nearly three-fourths of the total carbonaceous aerosol mass emitted globally, inclusion of the optical properties of tar balls into radiative forcing models has significance for the Earth's radiation budget, optical remote sensing, and understanding of anomalous UV absorption in the troposphere.

  12. Ball driven type MEMS SAD for artillery fuse

    Science.gov (United States)

    Seok, Jin Oh; Jeong, Ji-hun; Eom, Junseong; Lee, Seung S.; Lee, Chun Jae; Ryu, Sung Moon; Oh, Jong Soo

    2017-01-01

    The SAD (safety and arming device) is an indispensable fuse component that ensures safe and reliable performance during the use of ammunition. Because the application of electronic devices for smart munitions is increasing, miniaturization of the SAD has become one of the key issues for next-generation artillery fuses. Based on MEMS technology, various types of miniaturized SADs have been proposed and fabricated. However, none of them have been reported to have been used in actual munitions due to their lack of high impact endurance and complicated explosive train arrangements. In this research, a new MEMS SAD using a ball driven mechanism, is successfully demonstrated based on a UV LIGA (lithography, electroplating and molding) process. Unlike other MEMS SADs, both high impact endurance and simple structure were achieved by using a ball driven mechanism. The simple structural design also simplified the fabrication process and increased the processing yield. The ball driven type MEMS SAD performed successfully under the desired safe and arming conditions of a spin test and showed fine agreement with the FEM simulation result, conducted prior to its fabrication. A field test was also performed with a grenade launcher to evaluate the SAD performance in the firing environment. All 30 of the grenade samples equipped with the proposed MEMS SAD operated successfully under the high-G setback condition.

  13. Design and Fabrication of Power Supply to Heat the Titanium Ball in Vacuum Chamber of HL-2A Tokamak

    Institute of Scientific and Technical Information of China (English)

    KANGZhihua; RAOJun; ZHOUJun; WANGMingwei; CHENGanyu; ZHANGJingsong

    2003-01-01

    By using the physical characteristic of the titanium when it is subliming, fourteen titanium balls are fixed in the vacuum chamber to improve the background of the wall of the vacuum chamber of HL-2A. When the filaments of the balls have 40- 50 A current,temperatures of the balls is up to 1200 centigrade and the balls begin to sublime. Therefore in order to get better parameters of plasma, we fabricate fourteen power supplies to heat the balls.

  14. An improved effective microorganism (EM) soil ball-making method for water quality restoration.

    Science.gov (United States)

    Park, Gun-Seok; Khan, Abdur Rahim; Kwak, Yunyoung; Hong, Sung-Jun; Jung, ByungKwon; Ullah, Ihsan; Kim, Jong-Guk; Shin, Jae-Ho

    2016-01-01

    Soil balls containing the so-called effective microorganisms (EM) have been applied to improve water quality of small ponds, lakes, and streams worldwide. However, neither the physical conditions facilitating their proper application nor the diversity of microbial community in such soil balls have been investigated. In this study, the application of 0.75% of hardener to the soil balls exerted almost neutral pH (pH 7.3) which caused up to a fourfold increased hardness of the soil ball. Moreover, the 0.75% of hardener in the soil ball also improved the water quality due to a significant reduction in dissolved oxygen, total phosphorus, and total nitrogen contents. Metagenomic analysis of the microbial community in the soil ball with 0.75% hardener was compared with control (traditional soil ball) through next-generation sequencing. The traditional soil ball microbial community comprised 96.1% bacteria, 2.7% eukaryota, and 1% archaea, whereas the soil ball with 0.75% hardener comprised 71.4% bacteria, 27.9% eukaryota, and 0.2% viruses. Additionally, metagenomic profiles for both traditional and improved soil balls revealed that the various xenobiotic biodegradation, such as those for caprolactam, atrazine, xylene, toluene, styrene, bisphenol, and chlorocyclohexane might be responsible for organic waste cleanup.

  15. Motion analysis of throwing Boccia balls in children with cerebral palsy.

    Science.gov (United States)

    Huang, Po-Chang; Pan, Po-Jung; Ou, Yu-Chih; Yu, Yi-Chen; Tsai, Yung-Shen

    2014-02-01

    Boccia is a sport suitable for children with cerebral palsy (CP). Throwing Boccia balls requires upper extremity and torso coordination. This study investigated the differences between children with CP and normally developed children regarding throwing patterns of Boccia balls. Thirteen children with bilateral spastic CP and 20 normally developed children participated in this study. The tests in this study were a pediatric reach test and throwing of Boccia balls. A 3D electromagnetic motion tracking system and a force plate were synchronized to record and analyze biomechanical parameters of throwing Boccia balls. The results of the pediatric reach test for participants with CP were significantly worse than those for normally developed participants. The 2 groups of participants did not significantly differ regarding the distance between a thrown Boccia ball and a target ball (jack). Participants with CP demonstrated significantly longer movement duration, smaller amplitude of elbow movement, greater amplitudes of shoulder abduction and flexion, slower maximal velocity of torso flexion and the linear velocity of moving the wrist joint forward, faster maximal velocity of head flexion, and smaller sway ratio compared with normally developed participants when throwing Boccia balls. Participants with CP seemed to mainly use head and shoulder movements to bring the Boccia balls forward with limited torso movement. Normally developed participants brought the Boccia ball forward with faster torso and greater elbow movement while stabilizing head and shoulder movements. Nevertheless, participants with CP did not demonstrate significantly worse performance in the throwing accuracy of Boccia balls. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. The effect of ball compression on the match-play characteristics of elite junior tennis players.

    Science.gov (United States)

    Kachel, Kim; Buszard, Tim; Reid, Machar

    2015-01-01

    The purpose of this article was to examine the effect of equipment scaling, through the modification of tennis ball compression, on elite junior tennis players (aged 10 years) within a match-play context. The two types of ball compressions that were compared were the standard compression (the normal ball) and 75% compression (termed the modified ball). Ten boys and 10 girls participated in the study. Participants were stratified into pairs based on their Australian Age Ranking and gender. Each pair played two two-set matches: one match with standard compression balls and one match with modified balls. The characteristics of each match were analysed and compared. The results showed that the use of the modified ball increased rally speed, allowed players to strike the ball at a lower (more comfortable) height on their groundstrokes and increased the number of balls played at the net. Ball compression had no effect on the relative number of winners, forehands, backhands, first serves in and double faults. The results are discussed in relation to skill acquisition for skilled junior tennis players.

  17. Visualization of air flow around soccer ball using a particle image velocimetry.

    Science.gov (United States)

    Hong, Sungchan; Asai, Takeshi; Seo, Kazuya

    2015-10-08

    A traditional soccer ball is constructed using 32 pentagonal and hexagonal panels. In recent years, however, the likes of the Teamgeist and Jabulani balls, constructed from 14 and 8 panels, respectively, have entered the field, marking a significant departure from conventionality in terms of shape and design. Moreover, the recently introduced Brazuca ball features a new 6-panel design and has already been adopted by many soccer leagues. However, the shapes of the constituent panels of these balls differ substantially from those of conventional balls. Therefore, this study set out to investigate the flight and aerodynamic characteristics of different orientations of the soccer ball, which is constructed from panels of different shapes. A wind tunnel test showed substantial differences in the aerodynamic forces acting on the ball, depending on its orientation. Substantial differences were also observed in the aerodynamic forces acting on the ball in different directions, corresponding to its orientation and rotation. Moreover, two-dimensional particle image velocimetry (2D-PIV) measurements showed that the boundary separation varies depending on the orientation of the ball. Based on these results, we can conclude that the shape of the panels of a soccer ball substantially affects its flight trajectory.

  18. A Method to Determine the Ball Filling, in Miduk Copper Concentrator SAG Mill

    Directory of Open Access Journals (Sweden)

    Ali Kamali Moaveni

    2012-12-01

    Full Text Available The aim of this research work was to investigate on the ball filling estimation of Miduk semi-autogenous (SAG Mill via an utilized method. Miduk copper concentrator is located in Kerman Province, Iran, and its size reduction stage includes one gyratory crusher which feeds one SAG mill (9.75 dia.(m*3.88 length(m following two parallel ball mills (5dia.(m*7lenght(m. After SAG mill, a trommel screen produces two over and under size materials which the oversize part is circulated into SAG mill and undersize reports to hydrocyclone for further process. Ball filling identify was implemented in this work using mill`s load sampling and ball abrasion test.These methods could estimate ball filling variation with easy, undeniable, and useful tests. Also, these tests have shown the digression of operating ball filling amount and its manual designed. To make more homogenous load, mill load samplings were carried out from 6 points after whirling the mill via inching motor. Acquired load sampling results were compared with ball abrasion tests. Ball abrasion tests were calculated for 3 different conditions include maximum, average, and minimum ball abrasion. However, the calculated maximum and minimum conditions never occurred. However, these are just for obtaining to ball filling variation in the mill. The results obtained from this work show, the ball filling percentage variation is between 1.2– 3.7% which is lower than mill ball filling percentage, according to the designed conditions (15%. In addition, acquired load samplings result for mill ball filling was 1.3%.

  19. RNA Crystallization

    Science.gov (United States)

    Golden, Barbara L.; Kundrot, Craig E.

    2003-01-01

    RNA molecules may be crystallized using variations of the methods developed for protein crystallography. As the technology has become available to syntheisize and purify RNA molecules in the quantities and with the quality that is required for crystallography, the field of RNA structure has exploded. The first consideration when crystallizing an RNA is the sequence, which may be varied in a rational way to enhance crystallizability or prevent formation of alternate structures. Once a sequence has been designed, the RNA may be synthesized chemically by solid-state synthesis, or it may be produced enzymatically using RNA polymerase and an appropriate DNA template. Purification of milligram quantities of RNA can be accomplished by HPLC or gel electrophoresis. As with proteins, crystallization of RNA is usually accomplished by vapor diffusion techniques. There are several considerations that are either unique to RNA crystallization or more important for RNA crystallization. Techniques for design, synthesis, purification, and crystallization of RNAs will be reviewed here.

  20. Protein Crystallization

    Science.gov (United States)

    Chernov, Alexander A.

    2005-01-01

    Nucleation, growth and perfection of protein crystals will be overviewed along with crystal mechanical properties. The knowledge is based on experiments using optical and force crystals behave similar to inorganic crystals, though with a difference in orders of magnitude in growing parameters. For example, the low incorporation rate of large biomolecules requires up to 100 times larger supersaturation to grow protein, rather than inorganic crystals. Nucleation is often poorly reproducible, partly because of turbulence accompanying the mixing of precipitant with protein solution. Light scattering reveals fluctuations of molecular cluster size, its growth, surface energies and increased clustering as protein ages. Growth most often occurs layer-by-layer resulting in faceted crystals. New molecular layer on crystal face is terminated by a step where molecular incorporation occurs. Quantitative data on the incorporation rate will be discussed. Rounded crystals with molecularly disordered interfaces will be explained. Defects in crystals compromise the x-ray diffraction resolution crucially needed to find the 3D atomic structure of biomolecules. The defects are immobile so that birth defects stay forever. All lattice defects known for inorganics are revealed in protein crystals. Contribution of molecular conformations to lattice disorder is important, but not studied. This contribution may be enhanced by stress field from other defects. Homologous impurities (e.g., dimers, acetylated molecules) are trapped more willingly by a growing crystal than foreign protein impurities. The trapped impurities induce internal stress eliminated in crystals exceeding a critical size (part of mni for ferritin, lysozyme). Lesser impurities are trapped from stagnant, as compared to the flowing, solution. Freezing may induce much more defects unless quickly amorphysizing intracrystalline water.

  1. Computational crystallization.

    Science.gov (United States)

    Altan, Irem; Charbonneau, Patrick; Snell, Edward H

    2016-07-15

    Crystallization is a key step in macromolecular structure determination by crystallography. While a robust theoretical treatment of the process is available, due to the complexity of the system, the experimental process is still largely one of trial and error. In this article, efforts in the field are discussed together with a theoretical underpinning using a solubility phase diagram. Prior knowledge has been used to develop tools that computationally predict the crystallization outcome and define mutational approaches that enhance the likelihood of crystallization. For the most part these tools are based on binary outcomes (crystal or no crystal), and the full information contained in an assembly of crystallization screening experiments is lost. The potential of this additional information is illustrated by examples where new biological knowledge can be obtained and where a target can be sub-categorized to predict which class of reagents provides the crystallization driving force. Computational analysis of crystallization requires complete and correctly formatted data. While massive crystallization screening efforts are under way, the data available from many of these studies are sparse. The potential for this data and the steps needed to realize this potential are discussed.

  2. DETERMINATION OF BALL COHESIVE AND FRICTIONAL FORCES WITH TOOL AT POLISHING BETWEEN ALIGNED RINGS AND DISK

    Directory of Open Access Journals (Sweden)

    K. G. Schetnikovich

    2010-01-01

    Full Text Available The paper provides a design description of a tool used for polishing balls made of brittle materials between bottom driving disk and two rings. An external stationary ring has a ring turning of rectangular profile that helps the ring to be based directly on the balls which are to be polished and take self-aligned position in relation to tool rotation axis.  Forces acting on the balls in the points of contact with the tool with due account of friction against a separator and conditions of ball sliding along ring working surfaces are determined in the paper. Dependence for determination of stationary and driving ring load ratio when balls are sliding along two contact surfaces of the tool is ascertained in the paper. The paper contains recommendations on selection of modes for ball polishing at its initial and finishing stages.

  3. Design factors for “linear” ball valve: theoretical and experimental studies

    Directory of Open Access Journals (Sweden)

    Thananchai Leephakpreeda

    2005-03-01

    Full Text Available Generic non-linear flow characteristics of the conventional ball valve limit the applications of flow modulation in fluid processes. This work presents the flow characteristics of fluid flowing through the conventional and modified ball valves for feasibility of a “linear” ball valve. Theoretical studies are discussed for determining explicit and implicit factors on the valve coefficient, which modulates the flow rate of fluid when the ball valve is operated in flow control processes. In experiment, the cross- sectional opening area at various opening degrees, the shape, and the location of the hole passage in valve ball are examined for complicated relations dependent to the flow rate of fluid. It can be concluded that those factors cause the modulation of flow rate when the ball is turned at different opening degree. In extended design of flow characteristics for linearity, they are to be taken into account.

  4. Effects and mechanism of ball milling on torrefaction of pine sawdust.

    Science.gov (United States)

    Gong, Chunxiao; Huang, Jing; Feng, Chen; Wang, Guanghui; Tabil, Lope; Wang, Decheng

    2016-08-01

    The effects and mechanism of ball milling on the torrefaction process were studied. Ball- and hammer-milled (screen size 1mm) pine sawdust samples were torrefied at three temperatures (230, 260, and 290°C) and two durations (30 and 60min) to investigate into their torrefaction behavior and physicochemical properties. The results showed that, under identical torrefaction conditions, torrefied ball-milled pine sawdust had a higher carbon content and fixed carbon, and lower hydrogen and oxygen contents than torrefied hammer-milled pine sawdust. Torrefied ball-milled pine sawdust produced lower mass and energy yields, but higher heating values than torrefied hammer-milled pine sawdust. Ball milling destroyed the crystalline structure of cellulose and thus reduced the thermal stability of hemicellulose, cellulose, and lignin, causing them to degrade at relatively lower temperatures. In conclusion, biomass pretreated with a combination of ball milling and torrefaction has the potential to produce an alternative fuel to coal.

  5. Carbon Nanoparticles in Nematic Liquid Crystals

    Institute of Scientific and Technical Information of China (English)

    S.Eren San; Mustafa Okutan; O(g)uz K(o)ysal; Yusuf Yer-li

    2008-01-01

    Fullerene G60,C70,single-walled and multi-walled carbon nanotubes and graphene sheets are doped to nematic liquid crystal(LC)host in the same percentage.Planar samples of these mixtures are prepared and our measurements constitute an optimization basis for possible applications.Fullerene balls are found to be the best compatible material for optical aims and reorientation of LC molecules,while the carbon nanotubes experience some reorientation possibility in LC media and graphene layers are good barriers to preserve reorientation.

  6. Search for Neutral Q-balls in Super-Kamiokande II

    CERN Document Server

    Takenaga, Y; Hayato, Y; Iida, T; Ishihara, K; Kameda, J; Koshio, Y; Minamino, A; Mitsuda, C; Miura, M; Moriyama, S; Nakahata, M; Obayashi, Y; Ogawa, H; Shiozawa, M; Suzuki, Y; Takeda, A; Takeuchi, Y; Ueshima, K; Higuchi, I; Ishihara, C; Ishitsuka, M; Kajita, T; Kaneyuki, K; Mitsuka, G; Nakayama, S; Nishino, H; Okumura, K; Saji, C; Totsuka, Y; Clark, S; Desai, S; Dufour, F; Herfurth, A; Kearns, E; Likhoded, S; Litos, M; Raaf, Jennifer L; Stone, J L; Sulak, L R; Wang, W; Goldhaber, M; Casper, D; Cravens, J P; Dunmore, J; Griskevich, J; Kropp, W R; Liu, D W; Mine, S; Regis, C; Smy, M B; Sobel, H W; Vagins, M R; Ganezer, K S; Hill, J E; Keig, W E; Jang, J S; Kim, J Y; Lim, I T; Scholberg, K; Tanimoto, N; Walter, C W; Wendell, R; Ellsworth, R W; Tasaka, S; Guillian, E; Learned, J G; Matsuno, S; Messier, M D; Ichikawa, A K; Ishida, T; Ishii, T; Iwashita, T; Kobayashi, T; Nakadaira, T; Nakamura, K; Nishikawa, K; Nitta, K; Oyama, Y; Suzuki, A T; Hasegawa, M; Hiraide, K; Kato, I; Maesaka, H; Nakaya, T; Sasaki, T; Sato, H; Yamamoto, S; Yokoyama, M; Haines, T J; Dazeley, S; Hatakeyama, S; Svoboda, R; Sullivan, G W; Gran, R; Habig, A; Fukuda, Y; Sato, T; Itow, Y; Koike, T; Jung, C K; Kato, T; Kobayashi, K; Malek, M; McGrew, C; Sarrat, A; Terri, R; Yanagisawa, C; Tamura, N; Sakuda, M; Sugihara, M; Kuno, Y; Yoshida, M; Kim, S B; Yoo, J; Ishizuka, T; Okazawa, H; Choi, Y; Seo, H K; Gando, Y; Hasegawa, T; Inoue, K; Ishii, H; Nishijima, K; Ishino, H; Watanabe, Y; Koshiba, M; Chen, S; Deng, Z; Liu, Y; Kielczewska, D; Zalipska, J; Berns, H G; Shiraishi, K K; Washburn, K; Wilkes, R J; al, et

    2007-01-01

    A search for Q-balls induced groups of successive contained events has been carried out in Super-Kamiokande II with 541.7 days of live time. Neutral Q-balls would emit pions when colliding with nuclei, generating a signal of successive contained pion events along a track. No candidate for successive contained event groups has been found in Super-Kamiokande II, so upper limits on the possible flux of such Q-balls have been obtained.

  7. Solving ball lightning—A reply to Stefan and Massey (2008)

    Science.gov (United States)

    Coleman, Peter Francis

    2009-06-01

    Comments are made on the ball lightning paper of Stephan and Massey [Stefan, K.D., Massey, N., 2008. Burning molten metallic sphere: One class of ball lightning? Journal of Atmospheric and Solar-Terrestrial Physics 70, 1589-1596] that describes their [`]welding drop' theory. An alternative theory is offered based on combustion inside an atmospheric vortex. The [`]vortex fireball' hypothesis has good explanatory capability in regard to published ball lightning properties.

  8. Testing the Effect of Hydrophilic and Hydrophobic Coatings on the Speed of a Ball through Water

    CERN Document Server

    Wiegand, Natalie

    2013-01-01

    Data is presented that confirms that hydrophobic coatings reduce friction between objects and water. The results show that the average time it took for the ball with the hydrophobic coating traveled at an average of about 6 inches per second. The ball with the hydrophilic coating traveled at a slower pace, moving at an average of about 5 inches per second and the ball without a coating traveled at an average of about 4.8 inches per second.

  9. Toeplitz and Hankel Products on Bergman Spaces of the Unit Ball

    Institute of Scientific and Technical Information of China (English)

    Yufeng LU; Chaomei LIU

    2009-01-01

    The authors give some new necessary conditions for the boundedness of Toeplitzproducts TafTagon the weighted Bergman space A2a of the unit ball, where f and g are analytic on the unit ball. Hankel products HfH*g on the weighted Bergman space of the unit ball are studied, and the results analogous to those Stroethoff and Zheng obtained in the setting of unit disk are proved.

  10. Study on Optimizing of Ball Passing Strategy and Role Switching Mechanism for Robot Soccer

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new ball passing strategy for robot soccer is proposed in this paper. With introduce of a new algorithm on ball passing, the optimum strategy is confirmed to be more efficient and exact when passing a ball. Questions of role switching in multi-intelligent agent cooperation in robot soccer are described based on Generalized Stochastic Petri-Net (GSPN). Results of computer simulation have confirmed the feasibility and efficiency of above Petri-net method.

  11. Dual PD Control Regulation with Nonlinear Compensation for a Ball and Plate System

    Directory of Open Access Journals (Sweden)

    Sergio Galvan-Colmenares

    2014-01-01

    Full Text Available The normal proportional derivative (PD control is modified to a new dual form for the regulation of a ball and plate system. First, to analyze this controller, a novel complete nonlinear model of the ball and plate system is obtained. Second, an asymptotic stable dual PD control with a nonlinear compensation is developed. Finally, the experimental results of ball and plate system are provided to verify the effectiveness of the proposed methodology.

  12. Radiologic characteristics of sinonasal fungus ball: an analysis of 119 cases

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Young-Joon; Kim, Kyubo (Dept. of Otorhinolaryngology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of)); Kim, Jinna (Dept. of Radiology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of)); Lee, Jeung-Gweon; Kim, Chang-Hoon (Dept. of Otorhinolaryngology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); The Airway Mucus Institute, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of)), email: entman@yuhs.ac; Yoon, Joo-Heon (Dept. of Otorhinolaryngology, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); The Airway Mucus Institute, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); Research Center for Human Natural Defense System, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of); BK21 Project for Medical Science, Yonsei Univ. College of Medicine, Seoul (Korea, Republic of))

    2011-09-15

    Background. It is important to differentiate sinonasal fungus ball from non-fungal sinusitis and other forms of fungal sinusitis in order to determine the optimal treatment. In particular, a sinonasal fungus ball, a non-invasive fungal sinusitis, can be characterized by radiologic findings before surgery. Purpose. To differentiate a sinonasal fungus ball from other types of sinusitis and determine optimal treatment on the basis of radiologic findings before surgery. Material and Methods. We studied 119 patients with clinically and pathologically proven sinonasal fungus balls. Their condition was evaluated radiologically with contrast-enhanced CT (99 patients), non-contrast CT (18 patients) and/or MRI (17 patients) prior to sinonasal surgery. Results. Calcifications were found in 78 of 116 (67.2%) patients who underwent CT scans for fungus ball. As opposed to non-contrast CT scans, contrast CT scans revealed hyper attenuating fungal ball in 82.8% and enhanced inflamed mucosa in 65.5% of the patients, respectively. On MRI, most sinonasal fungal balls showed iso- or hypointensity on T1-weighted images and marked hypointensity on T2-weighted images. Inflamed mucosal membranes were noted and appeared as hypointense on T1-weighted images (64.7%) and hyperintense on T2-weighted images (88.2%). Conclusion. When there are no calcifications visible on the CT scan, a hyper attenuating fungal ball located in the central area of the sinus with mucosal thickening on enhanced CT scans is an important feature of a non-invasive sinonasal fungus ball. On MRI, a sinonasal fungus ball has typical features of a marked hypointense fungus ball with a hyperintense mucosal membrane in T2-weighted images. A contrast-enhanced CT scan or MRI provides sufficient information for the preoperative differentiation of a sinonasal fungus ball from other forms of sinusitis

  13. Forecasting Employees’ Success at Work in Banking: Could Psychological Testing Be Used as the Crystal Ball?

    Directory of Open Access Journals (Sweden)

    Natalija Simic

    2013-09-01

    Full Text Available Human resources have nowadays been recognized as one of the most important key competitive advantages of organizations. Human resources management deals with the recruitment, selection and training of the best candidates for a particular job position. Although training has significant influence on the performance of employees, recruitment and selection still remain the crucial steps. The goal of the paper is to explore if special characteristics of candidates for employment in the banking industry could be used for predicting their future success at work. Real-life data from a Croatian bank’s employee database are used for analysis, with the total sample of 1659 candidates tested for the purpose of employment. Results of the multiple regression analysis indicate that the following characteristics are important at forecasting an employee’s success at work in the banking sector: cognitive ability, reasoning, dominance, social boldness, sensitivity, openness to change, warmth, and emotional stability. Therefore, as the best practice for recruitment, the use of the Profile of a Quality Candidate in Banking is proposed.

  14. Determination of the η mass with the Crystal Ball at MAMI-B

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaev, A.; Beck, R.; Lang, M. [University Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik, Bonn (Germany); Aguar-Bartolome, P.; Ahrens, J.; Arends, H.J.; Dehn, M.; Heid, E.; Jahn, O.; Jankowiak, A.; Kaiser, K.H.; Krambrich, D.; Ludwig-Mertin, U.; Martinez-Fabregate, M.; Rost, M.; Thomas, A.; Walcher, T. [University Mainz, Institut fuer Kernphysik, Mainz (Germany); Annand, J.R.M.; Codling, R.; Downie, E.J.; Livingston, K.; MacGregor, I.J.D.; McGeorge, J.C.; Owens, R.O.; Rosner, G. [University of Glasgow, Department of Physics and Astronomy, Glasgow (United Kingdom); Bekrenev, V. [Petersburg Nuclear Physics Institute, Gatchina (Russian Federation); Boillat, B.; Krusche, B.; Zehr, F. [University Basel, Institut fuer Physik, Basel (Switzerland); Braghieri, A.; Pedroni, P. [Sezione di Pavia, INFN, Pavia (Italy); Branford, D.; Glazier, D.I.; Tarbert, C.M.; Watts, D.P. [University of Edinburgh, School of Physics, Edinburgh (United Kingdom); Briscoe, W.J. [The George Washington University, Center for Nuclear Studies, Washington (United States); Brudvik, J.W.; Nefkens, B.M.K.; Prakhov, S.N.; Price, J.W.; Starostin, A. [University of California Los Angeles, Los Angeles, California (United States); Cherepnya, S.; Fil' kov, L.V. [Lebedev Physical Institute, Moscow (Russian Federation); Gregor, R.; Kotulla, M.; Lugert, S.; Metag, V.; Novotny, R. [University Giessen, II. Physikalisches Institut, Giessen (Germany); Hornidge, D. [Mount Allison University, Sackville (Canada); Kashevarov, V.L. [University Mainz, Institut fuer Kernphysik, Mainz (Germany); Lebedev Physical Institute, Moscow (Russian Federation); Kondratiev, R.; Lisin, V.; Polonski, A. [Institute for Nuclear Research, Moscow (Russian Federation); Korolija, M.; Mekterovic, D.; Supek, I. [Rudjer Boskovic Institute, Zagreb (Croatia); Manley, D.M. [Kent State University, Kent, Ohio (United States); Reiter, A. [University Mainz, Institut fuer Kernphysik, Mainz (Germany); University of Glasgow, Department of Physics and Astronomy, Glasgow (United Kingdom); Rostomyan, T. [University Basel, Institut fuer Physik, Basel (Switzerland); Sezione di Pavia, INFN, Pavia (Italy); Schumann, S.; Unverzagt, M. [University Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik, Bonn (Germany); University Mainz, Institut fuer Kernphysik, Mainz (Germany); Sober, D. [The Catholic University of America, Washington (United States); Collaboration: The Crystal Ball at MAMI, TAPS Collaboration; A2 Collaboration

    2014-03-15

    A new precise determination of the η meson mass is presented. It is based on a measurement of the threshold for the γp → pη reaction using the tagger focal-plane microscope detector at the MAMI-B facility in Mainz. The tagger microscope has a higher energy resolution than the standard tagging spectrometer and, hence, allowed an improvement in the accuracy compared to the previous η mass measurement at MAMI-B. Special emphasis was put on a very careful energy calibration of the electron beam and the tagging device, which reduced considerably the systematic uncertainty compared to the previous MAMI experiment. The result m{sub η} = (547.865 ± 0.031{sub stat.} ± 0.062{sub syst.}) MeV agrees very well with the precise values of the NA48, KLOE, CLEO and COSY-ANKE Collaborations and deviates by 6σ from the smaller value obtained by the GEM Collaboration at COSY. (orig.)

  15. Working without a Crystal Ball: Predicting Web Trends for Web Services Librarians

    Science.gov (United States)

    Ovadia, Steven

    2008-01-01

    User-centered design is a principle stating that electronic resources, like library Web sites, should be built around the needs of the users. This article interviews Web developers of library and non-library-related Web sites, determining how they assess user needs and how they decide to adapt certain technologies for users. According to the…

  16. Of Climate Change and Crystal Balls: The Future Consequences of Climate Change in Africa

    Science.gov (United States)

    2012-01-01

    than most of the previous interglacials, and humans have capitalized on this extended period of global warmth.4 During the Holocene, the global...model structural uncertainty”—covers a host of unknown processes that may simply be missing from the models.17 For example, some potential...already grow near or above their tempera- ture optima , and further warming in the absence of adaptive changes to cropping systems would reduce their

  17. Crystal ball - 2013: Recombination-based DNA assembly in metabolic engineering: a goodbye to old workhorses?

    NARCIS (Netherlands)

    Daran, J.M.; Pronk, J.T.

    2012-01-01

    In this feature, leading researchers in the field of environmental microbiology speculate on the technical and conceptual developments that will drive innovative research and open new vistas over the next few years. For the better part of four decades, genetic engineering has relied on a universal t

  18. Gazing into the Crystal Ball: Using Scenarios for Future Visioning of a Distance Learning Library Service

    Science.gov (United States)

    Casey, Anne Marie; Cawthorne, Jon E.; Citro, Kathleen

    2014-01-01

    This article describes the use of scenarios as a tool to assist a large distance learning library service in its strategic planning. Through a description of the scenario process from beginning to end, the authors detail the steps that the library director and the consultant took initially; their missteps; and the successful conclusion. This study…

  19. Peering into a Crystal Ball: What's the Future for Wheelchair-Seated Travel?

    Science.gov (United States)

    van Roosmalen, Linda; Hobson, Douglas

    2008-01-01

    Over the past year, a team of transportation engineers, product designers, and therapists has been writing a series of articles about wheelchair transportation safety in partnership with "EP." These experts understand the importance of transportation for social inclusion, maintaining health, and being able to get to school and work. Previous…

  20. Determination of the {\\eta} mass with the Crystal Ball at MAMI-B

    CERN Document Server

    Nikolaev, A; Ahrens, J; Annand, J R M; Arends, H J; Beck, R; Bekrenev, V; Boillat, B; Braghieri, A; Branford, D; Briscoe, W J; Brudvik, J W; Cherepnya, S; Codling, R; Dehn, M; Downie, E J; Fil'kov, L V; Glazier, D I; Gregor, R; Heid, E; Hornidge, D; Jahn, O; Jankowiak, A; Kaiser, K -H; Kashevarov, V L; Kondratiev, R; Korolija, M; Kotulla, M; Krambrich, D; Krusche, B; Lang, M; Lisin, V; Livingston, K; Ludwig-Mertin, U; Lugert, S; MacGregor, I J D; Manley, D M; Martinez-Fabregate, M; McGeorge, J C; Mekterovic, D; Metag, V; Nefkens, B M K; Novotny, R; Owens, R O; Pedroni, P; Polonski, A; Prakhov, S N; Price, J W; Reiter, A; Rosner, G; Rost, M; Rostomyan, T; Schumann, S; Sober, D; Starostin, A; Supek, I; Tarbert, C M; Thomas, A; Unverzagt, M; Walcher, Th; Watts, D P; Zehr, F

    2012-01-01

    A new precise determination of the {\\eta} meson mass is presented. It is based on a measurement of the threshold for the {\\gamma}p -> p{\\eta} reaction using the tagger focal-plane microscope detector at the MAMI-B facility in Mainz. The tagger microscope has a higher energy resolution than the standard tagging spectrometer and, hence, allowed an improvement in the accuracy compared to the previous {\\eta} mass measurement at MAMI-B. The result m{\\eta} = (547.851 +- 0.031 stat. +- 0.062 syst.) MeV agrees very well with the precise values of the NA48, KLOE and CLEO collaborations and deviates by about 5{\\sigma} from the smaller, but also very precise value obtained by the GEM collaboration at COSY.

  1. Crystal ball - 2013: Recombination-based DNA assembly in metabolic engineering: a goodbye to old workhorses?

    NARCIS (Netherlands)

    Daran, J.M.; Pronk, J.T.

    2012-01-01

    In this feature, leading researchers in the field of environmental microbiology speculate on the technical and conceptual developments that will drive innovative research and open new vistas over the next few years. For the better part of four decades, genetic engineering has relied on a universal t

  2. Crystal balls into the future: are global circulation and water balance models ready?

    Science.gov (United States)

    Fekete, Balázs M.; Pisacane, Giovanna; Wisser, Dominik

    2016-10-01

    Variabilities and changes due to natural and anthropogenic causes in the water cycle always presented a challenge for water management planning. Practitioners traditionally coped with variabilities in the hydrological processes by assuming stationarity in the probability distributions and attempted to address non-stationarity by revising this probabilistic properties via continued hydro-climatological observations. Recently, this practice was questioned and more reliance on Global Circulation Models was put forward as an alternative for water management plannig. This paper takes a brief assessment of the state of Global Circulation Models (GCM) and their applications by presenting case studies over Global, European and African domains accompanied by literature examples. Our paper demonstrates core deficiencies in GCM based water resources assessments and articulates the need for improved Earth system monitoring that is essential not only for water managers, but to aid the improvements of GCMs in the future.

  3. Computed tomography of ball pythons (Python regius) in curled recumbency.

    Science.gov (United States)

    Hedley, Joanna; Eatwell, Kevin; Schwarz, Tobias

    2014-01-01

    Anesthesia and tube restraint methods are often required for computed tomography (CT) of snakes due to their natural tendency to curl up. However, these restraint methods may cause animal stress. The aim of this study was to determine whether the CT appearance of the lungs differs for ball pythons in a curled position vs. tube restraint. Whole body CT was performed on ten clinically healthy ball pythons, first in curled and then in straight positions restrained in a tube. Curved multiplanar reformatted (MPR) lung images from curled position scans were compared with standard MPR lung images from straight position scans. Lung attenuation and thickness were measured at three locations for each scan. Time for positioning and scanning was 12 ± 5 min shorter for curled snakes compared to tube restraint. Lung parenchyma thickness and attenuation declined from cranial to caudal on both straight and curled position images. Mean lung parenchyma thickness was greater in curled images at locations 1 (P = 0.048) and 3 (P = 0.044). Mean lung parenchyma thickness decreased between location 1 and 2 by 86-87% (straight: curled) and between location 1 and 3 by 51-50% (straight: curled). Mean lung attenuation at location 1 was significantly greater on curled position images than tube restraint images (P = 0.043). Findings indicated that CT evaluation of the lungs is feasible for ball pythons positioned in curled recumbency if curved MPR is available. However, lung parenchyma thickness and attenuation in some locations may vary from those acquired using tube restraint.

  4. Solid charged-core model of ball lightning

    Directory of Open Access Journals (Sweden)

    D. B. Muldrew

    2010-01-01

    Full Text Available In this study, ball lightning (BL is assumed to have a solid, positively-charged core. According to this underlying assumption, the core is surrounded by a thin electron layer with a charge nearly equal in magnitude to that of the core. A vacuum exists between the core and the electron layer containing an intense electromagnetic (EM field which is reflected and guided by the electron layer. The microwave EM field applies a ponderomotive force (radiation pressure to the electrons preventing them from falling into the core. The energetic electrons ionize the air next to the electron layer forming a neutral plasma layer. The electric-field distributions and their associated frequencies in the ball are determined by applying boundary conditions to a differential equation given by Stratton (1941. It is then shown that the electron and plasma layers are sufficiently thick and dense to completely trap and guide the EM field. This model of BL is exceptional in that it can explain all or nearly all of the peculiar characteristics of BL. The ES energy associated with the core charge can be extremely large which can explain the observations that occasionally BL contains enormous energy. The mass of the core prevents the BL from rising like a helium-filled balloon – a problem with most plasma and burning-gas models. The positively charged core keeps the negatively charged electron layer from diffusing away, i.e. it holds the ball together; other models do not have a mechanism to do this. The high electrical charges on the core and in the electron layer explains why some people have been electrocuted by BL. Experiments indicate that BL radiates microwaves upon exploding and this is consistent with the model. The fact that this novel model of BL can explain these and other observations is strong evidence that the model should be taken seriously.

  5. ANALYSIS OF MECHANICS IN BALL SPINNING OF THIN-WALLED TUBE

    Institute of Scientific and Technical Information of China (English)

    JIANG Shuyong; REN Zhengyi

    2008-01-01

    Ball spinning is applied to manufacturing thin-walled tube with high precision and high mechanical properties. On the basis of plastic mechanics, by simplifying ball spinning of thin-walled tube as plane strain problem, slab method is used for the purpose of calculating the contact deformation pressure. The spinning force components, the torsional moment, the deformation power and the deformation work are calculated further as well. The influence of the two important process parameters such as the feed ratio and the ball diameter on the spinning force components is analyzed in order to further control the spinning force components by regulating the two process variables during the ball spinning process. The stress and strain state in deformable zone as well as mechanics boundary conditions in ball spinning are obtained. The effect of the three spinning force components on the formability of the spun part is analyzed and validated through the ball spinning experiments. The theoretical and experimental results show that the radial spinning component plays a significant role in ball spinning of thin-walled tube, and the mechanics situation in backward ball spinning contributes to enhancing the plasticity of the metal material, but that in forward ball spinning contributes to advancing the axial flow of the metal material.

  6. Analisis Perbandingan Experiential Value antara Hong Tang dan Black Ball serta Hubungannya dengan Customer Satisfaction

    Directory of Open Access Journals (Sweden)

    Annetta Gunawan

    2014-11-01

    Full Text Available Black Ball and Hong Tang are two pioneers of Taiwanese dessert sellers in Jakarta. Both of them have product offering characteristics that are alike and have the same target market. From the initial observation, the researcher found that even though Black Ball has more outlets than Hong Tang, but Black Ball seems to be less popular than Hong Tang. The consumers’ preferences are varied, there are some consumers prefer Hong Tang, but there are also those who choose Black Ball, because of the food quality, the service provided, and also the experiences they get during the consumption process. Therefore, both Black Ball and Hong Tang have to consider about the experiential value to be offered to their customers, in order to increase their customer satisfaction, so that they can sustainably survive in the midst of challenging competition. The objectives of this research are to examine whether there is any difference of experiential value dimensions and customer satisfaction between Hong Tang and Black Ball and to examine the relationship between experiential value dimensions and customer satisfaction of Hong Tang and Black Ball. The result of this research concludes that there is no difference of all experiential value dimensions and customer satisfaction between Hong Tang and Black Ball and there is a strong and significant relationship between all experiential value dimensions and customer satisfaction of Hong Tang and Black Ball.

  7. Analisis Perbandingan Experiential Value antara Hong Tang dan Black Ball serta Hubungannya dengan Customer Satisfaction

    Directory of Open Access Journals (Sweden)

    Annetta Gunawan

    2014-11-01

    Full Text Available Black Ball and Hong Tang are two pioneers of Taiwanese dessert sellers in Jakarta. Both of them have product offering characteristics that are alike and have the same target market. From the initial observation, the researcher found that even though Black Ball has more outlets than Hong Tang, but Black Ball seems to be less popular than Hong Tang. The consumers preferences are varied, there are some consumers prefer Hong Tang, but there are also those who choose Black Ball, because of the food quality, the service provided, and also the experiences they get during the consumption process. Therefore, both Black Ball and Hong Tang have to consider about the experiential value to be offered to their customers, in order to increase their customer satisfaction, so that they can sustainably survive in the midst of challenging competition. The objectives of this research are to examine whether there is any difference of experiential value dimensions and customer satisfaction between Hong Tang and Black Ball and to examine the relationship between experiential value dimensions and customer satisfaction of Hong Tang and Black Ball. The result of this research concludes that there is no difference of all experiential value dimensions and customer satisfaction between Hong Tang and Black Ball and there is a strong and significant relationship between all experiential value dimensions and customer satisfaction of Hong Tang and Black Ball

  8. Measurements of the Motion of Plasma Filaments in a Plasma Ball

    Energy Technology Data Exchange (ETDEWEB)

    Campanell, M.; Laird, J.; Provost, T.; Vasquez, S.; Zweben, S. J.

    2010-01-26

    Measurements were made of the motion of the filamentary structures in a plasma ball using high speed cameras and other optical detectors. These filaments traverse the ball radially at ~106 cm/sec at the driving frequency of ~26 kHz, and drift upward through the ball at ~1 cm/sec. Varying the applied high voltage and frequency caused the number, length, and diameter of the filaments to change. A custom plasma ball was constructed to observe the effects of varying gas pressure and species on the filament structures.

  9. Investigation of a Ball Screw Feed Drive System Based on Dynamic Modeling for Motion Control

    Directory of Open Access Journals (Sweden)

    Yi-Cheng Huang

    2017-06-01

    Full Text Available This paper examines the frequency response relationship between the ball screw nut preload, ball screw torsional stiffness variations and table mass effect for a single-axis feed drive system. Identification for the frequency response of an industrial ball screw drive system is very important for the precision motion when the vibration modes of the system are critical for controller design. In this study, there is translation and rotation modes of a ball screw feed drive system when positioning table is actuated by a servo motor. A lumped dynamic model to study the ball nut preload variation and torsional stiffness of the ball screw drive system is derived first. The mathematical modeling and numerical simulation provide the information of peak frequency response as the different levels of ball nut preload, ball screw torsional stiffness and table mass. The trend of increasing preload will indicate the abrupt peak change in frequency response spectrum analysis in some mode shapes. This study provides an approach to investigate the dynamic frequency response of a ball screw drive system, which provides significant information for better control performance when precise motion control is concerned.

  10. Experimental Research on Residual Stress in Surface of Silicon Nitride Ceramic Balls

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The influence of the residual stress in surface of ceramic balls on the fatigue life is large, because the life of silicon nitride ball bearings is more sensitive to the load acted on the bearings than the life of all-steel ball bearings. In this paper, the influence of thermal stress produced in sintering and mechanical stress formed in lapping process on residual stress in surface of silicon nitride ceramic balls was discussed. The residual compress stress will be formed in the surface of silicon nitride ...

  11. A numerical and experimental study of the kinematics of a tennis ball

    Science.gov (United States)

    Navarro Sorroche, Juan

    A numerical and experimental study of the kinematics of a tennis ball. An experimental apparatus to collect data of the tennis ball in motion is designed and constructed. Data collected by the experimental apparatus is corrected by the intrinsic and extrinsic camera distortions before numeric calculation predictions of the ball's point of impact with the court are made. The experimental apparatus constructed together with comprehensive numeric computations including atmospheric conditions and spin decay, allowed making predictions of the ball's point of impact with the court with and errors <0.029%

  12. Three Balls Problem Revisited - On the Limitations of Event-Driven Modeling

    CERN Document Server

    Mueller, Patric

    2010-01-01

    If a tennis ball is held above a basket ball with their centers vertically aligned, and the balls are released to collide with the floor, the tennis ball may rebound at a surprisingly high speed. We show in this article that the simple textbook explanation of this effect is an oversimplification, even for the limit of perfectly elastic particles. Instead, there may occur a rather complex scenario including multiple collisions which may lead to a very different final velocity as compared with the velocity resulting from the oversimplified model.

  13. Theory of Q-ball imaging redux: Implications for fiber tracking.

    Science.gov (United States)

    Barnett, Alan

    2009-10-01

    Q-ball imaging is widely used to determine fiber directions for fiber tracking. In q-ball imaging the directional dependence of water diffusion in tissue is described by Tuch's orientation distribution function (ODF); a different function, the q-ball orientation distribution function, is measured using high angular resolution magnetic resonance diffusion imaging (HARDI). Tuch's ODF is assumed to be well approximated by the q-ball ODF. In this study it is shown that: 1) the q-ball ODF is not a good approximation to Tuch's ODF; 2) the properties of the q-ball ODF depend strongly on q, the area of the diffusion sensitization gradients; and 3) the q-ball ODF for a composite system is the weighted average of the q-ball ODFs for each subsystem, but the weighting factor is the product of the percent composition and a renormalization factor. In addition, a derivation is presented of the q-ball ODF for a system described by a Gaussian distribution and expressions are derived for both the dependence of the angular resolution on q and for the relation between the angular resolution and the signal loss. These findings might be useful in the design and interpretation of fiber-tracking experiments. (c) 2009 Wiley-Liss, Inc.

  14. A Novel Generic Ball Recognition Algorithm Based on Omnidirectional Vision for Soccer Robots

    Directory of Open Access Journals (Sweden)

    Hui Zhang

    2013-11-01

    Full Text Available It is significant for the final goal of RoboCup to realize the recognition of generic balls for soccer robots. In this paper, a novel generic ball recognition algorithm based on omnidirectional vision is proposed by combining the modified Haar-like features and AdaBoost learning algorithm. The algorithm is divided into offline training and online recognition. During the phase of offline training, numerous sub-images are acquired from various panoramic images, including generic balls, and then the modified Haar-like features are extracted from them and used as the input of the AdaBoost learning algorithm to obtain a classifier. During the phase of online recognition, and according to the imaging characteristics of our omnidirectional vision system, rectangular windows are defined to search for the generic ball along the rotary and radial directions in the panoramic image, and the learned classifier is used to judge whether a ball is included in the window. After the ball has been recognized globally, ball tracking is realized by integrating a ball velocity estimation algorithm to reduce the computational cost. The experimental results show that good performance can be achieved using our algorithm, and that the generic ball can be recognized and tracked effectively.

  15. Statics and dynamics of a self-bound matter-wave quantum ball

    Science.gov (United States)

    Adhikari, S. K.

    2017-02-01

    We study the statics and dynamics of a stable, mobile, three-dimensional matter-wave spherical quantum ball created in the presence of an attractive two-body and a very small repulsive three-body interaction. The quantum ball can propagate with a constant velocity in any direction in free space and its stability under a small perturbation is established numerically and variationally. In frontal head-on and angular collisions at large velocities two quantum balls behave like quantum solitons. Such collision is found to be quasielastic and the quantum balls emerge after collision without any change of direction of motion and velocity and with practically no deformation in shape. When reflected by a hard impenetrable plane, the quantum ball bounces off like a wave obeying the law of reflection without any change of shape or speed. However, in a collision at small velocities two quantum balls coalesce to form a larger ball which we call a quantum-ball breather. We point out the similarity and difference between the collision of two quantum and classical balls. The present study is based on an analytic variational approximation and a full numerical solution of the mean-field Gross-Pitaevskii equation using the parameters of 7Li atoms.

  16. Crystal Data

    Science.gov (United States)

    SRD 3 NIST Crystal Data (PC database for purchase)   NIST Crystal Data contains chemical, physical, and crystallographic information useful to characterize more than 237,671 inorganic and organic crystalline materials. The data include the standard cell parameters, cell volume, space group number and symbol, calculated density, chemical formula, chemical name, and classification by chemical type.

  17. Touchdown Ball-Bearing System for Magnetic Bearings

    Science.gov (United States)

    Kingsbury, Edward P.; Price, Robert; Gelotte, Erik; Singer, Herbert B.

    2003-01-01

    The torque-limited touchdown bearing system (TLTBS) is a backup mechanical-bearing system for a high-speed rotary machine in which the rotor shaft is supported by magnetic bearings in steady-state normal operation. The TLTBS provides ball-bearing support to augment or supplant the magnetic bearings during startup, shutdown, or failure of the magnetic bearings. The TLTBS also provides support in the presence of conditions (in particular, rotational acceleration) that make it difficult or impossible to control the magnetic bearings or in which the magnetic bearings are not strong enough (e.g., when the side load against the rotor exceeds the available lateral magnetic force).

  18. On the Third Gap for Proper Holomorphic Maps between Balls

    CERN Document Server

    Huang, Xiaojun; Yin, Wanke

    2012-01-01

    In this paper, we study the gap rigidity phenomenon for proper holomorphic maps between balls of different dimension. We show that any $F\\in prop_3({\\mathbb{B}}^n, {\\mathbb{B}} ^N)$, with $3n

  19. FPGA Fuzzy Controller Design for Magnetic Ball Levitation

    Directory of Open Access Journals (Sweden)

    Basil Hamed

    2012-09-01

    Full Text Available this paper presents a fuzzy controller design for nonlinear system using FPGA. A magnetic levitation system is considered as a case study and the fuzzy controller is designed to keep a magnetic object suspended in the air counteracting the weight of the object. Fuzzy controller will be implemented using FPGA chip. The design will use a high-level programming language HDL for implementing the fuzzy logic controller using the Xfuzzy tools to implement the fuzzy logic controller into HDL code. This paper, advocates a novel approach to implement the fuzzy logic controller for magnetic ball levitation system by using FPGA.

  20. Sports injuries in adolescents' ball games: soccer, handball and basketball.

    OpenAIRE

    Yde, J; Nielsen, A.B.

    1990-01-01

    In a prospective study of 302 adolescent players in three ball games (soccer, handball and basketball), 119 incurred injuries. The injury incidence (number of injuries per 1000 playing hours) was 5.6 in soccer, 4.1 in handball and 3.0 in basketball. Ankle sprains accounted for 25 per cent of the injuries, finger sprains 32 per cent, strains in the thigh and leg 10 per cent, and tendinitis/apophysitis 12 per cent. The most serious injuries were four fractures, one anterior cruciate ligament ru...

  1. Wear Debris Analysis of Grease Lubricated Ball Bearings.

    Science.gov (United States)

    1982-04-12

    fluid and debris were placed in a glass bottle and sealed with a plastic cap using a teflon sealing disk. The grease and cleaning fluid were...manner. 1. Ten 3m-diameter glass beads were placed in a 1/2 ounce bottle . The use of these glass beads aided the agitation process of the grease...AD-A19’ 470 NAVAL AIR ENGINEERING CENTER LAKEHURST NJ SUPPORT EGU -ETC F/B 11/9 WEAR DEBRIS ANALYSIS OF GREASE LUBRICATED BALL BEARINGS(U

  2. Fungal ball within Onodi cell mucocele causing visual loss.

    Science.gov (United States)

    Cheon, Yong-Il; Hong, Sung-Lyong; Roh, Hwan-Jung; Cho, Kyu-Sup

    2014-03-01

    The Onodi cell is a pneumatized posterior ethmoid cell located laterally and superiorly to the sphenoid sinus and closely related to the optic nerve. A mucocele is a benign, expansile, cystlike lesion of the paranasal sinuses that is filled with mucoid secretion. Therefore, optic neuropathy caused by an infected mucocele in an Onodi cell is uncommon. Furthermore, fungal infection superimposed on an Onodi cell mucocele is extremely rare and has not been reported previously. Here, we describe the first case of fungal ball within Onodi cell mucocele causing visual loss, which was completely removed via transnasal endoscopic approach.

  3. Formation of ball-milled Fe-Mo nanostructured powders

    Energy Technology Data Exchange (ETDEWEB)

    Moumeni, H. [Laboratoire de Magnetisme et de Spectroscopie des Solides, LM2S, Departement de Physique, Faculte des Sciences, Universite de Annaba, B.P. 12, 23000 Annaba-Algerie (Algeria) and Departement de Physique, Faculte des Sciences et de l' Ingenierie, Universite de Guelma, B.P. 401, 24000 Guelma-Algerie (Algeria)]. E-mail: hmoumeni@yahoo.fr; Alleg, S. [Laboratoire de Magnetisme et de Spectroscopie des Solides, LM2S, Departement de Physique, Faculte des Sciences, Universite de Annaba, B.P. 12, 23000 Annaba-Algerie (Algeria); Greneche, J.M. [Laboratoire de Physique de l' Etat Condense, UMR CNRS 6087, Universite du Maine, Faculte des Sciences, F-72085, Le Mans Cedex 9 (France)

    2006-08-10

    Nanostructured Fe-6 wt.%Mo powders were prepared by mechanical alloying in a high-energy planetary ball-mill. The structural changes and the kinetics of Mo dissolution were studied by using X-ray diffraction. The crystallite size reduction down to about 11 nm is accompanied by the introduction of internal strains up to 1.1% (root-mean square strain, rms). After 24 h of milling, a bcc Fe(Mo) solid solution is formed. The kinetics of Mo dissolution into the Fe matrix during the milling process can be described by two regimes characterized by small values of Avrami parameter which do not exceed unit.

  4. Taguchi Experimental Design for Cleaning PWAs with Ball Grid Arrays

    Science.gov (United States)

    Bonner, J. K.; Mehta, A.; Walton, S.

    1997-01-01

    Ball grid arrays (BGAs), and other area array packages, are becoming more prominent as a way to increase component pin count while avoiding the manufacturing difficulties inherent in processing quad flat packs (QFPs)...Cleaning printed wiring assemblies (PWAs) with BGA components mounted on the surface is problematic...Currently, a low flash point semi-aqueous material, in conjunction with a batch cleaning unit, is being used to clean PWAs. The approach taken at JPL was to investigate the use of (1) semi-aqueous materials having a high flash point and (2) aqueous cleaning involving a saponifier.

  5. Analysis of Conditions favorable for Ball Lightning Creation

    CERN Document Server

    Boerner, H

    2016-01-01

    This report uses a few well documented cases of Ball Lightning (or BL for short) observations to demonstrate a correlation between BL and positive lightning, especially strong positive lightning. This allows to draw conclusions and predictions about future BL observations and the pro- duction of these objects in the laboratory. Contrary to many current BL theories, these objects can be created without direct contact to a lightning channel. Very high electric fields appear to be essential for the creation, together with the proper temporal structure of the field. So far no experiments have been performed along the ideas presented in this report.

  6. OCCUPATION TIMES OF BALLS BYBROWNIAN MOTION WITH DRIFT

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Let X = {Xt,t 0} be a d-dimensional (d 2) standard Brownian motion with drift c started at a fixed x, and BR = {x ∈ Rd : |x| < R}, the ball centered at 0 with radius R. Consider the distributions of TR(t) and TR(∞), where TR(t) denotes the time spent by X in BR up to time t and TR(∞) the total time of X spent in BR. Explicit formulas for the Laplace transform of TR(∞) and the double Laplace transform of TR(t) are obtained.

  7. Investigation of sequential cryogenic hard turning and ball burnishing processes

    Directory of Open Access Journals (Sweden)

    K. Żak

    2014-10-01

    Full Text Available This paper presents a sequential machining process which incorporates CBN hard turning with cryogenic pre-cooling of the workpiece (CHT and ball burnishing (BB. The main goal of this study was to select machining conditions enhancing the quality of parts machined by hard turning including the surface roughness Ra of about 0,2 μm, good bearing properties and reducing the white layer. Changes of surface roughness, surface texture, microstructure alterations and micro-hardness distribution are discusses.

  8. Preparation of iron sulphides by high energy ball milling

    DEFF Research Database (Denmark)

    Lin, R.; Jiang, Jianzhong; Larsen, R.K.;

    1998-01-01

    The reaction of a powder mixture consisting of 50 a.% Fe and 50 a.% S during high energy ball milling has been studied by x-ray diffraction and Mossbauer spectroscopy. After around 19 h of milling FeS2 and FeS havebeen formed. By further milling the FeS compound becomes dominating and only Fe......S with an average crystallite size of about 10 nm was observed after milling times longer than 67 h. Mossbauer spectra obtained with applied fields show that the particles are antiferromagnetic or have a strongly canted spin structure....

  9. Effect of process variables on synthesis of MgB2 by a high energy ball mill

    Directory of Open Access Journals (Sweden)

    Kurama Haldun

    2016-01-01

    Full Text Available The discovery of superconductivity of MgB2 in 2001, with a critical temperature of 39 K, offered the promise of important large-scale applications at around 20 K. Except than the other featured synthesis methods, mechanical activation performed by high energy ball mills, as bulk form synthesis or as a first step of wire and thin film productions, has considered as an effective alternative production route in recent years. The process of mechanical activation (MA starts with mixing the powders in the right proportion and loading the powder mixture into the mill with the grinding media. The milled powder is then consolidated into a bulk shape and heat-treated to obtain desired microstructure and properties. Thus, the important components of the MA process are the raw materials, mill type and process variables. During the MA process, heavy deformation of particles occure. This is manifested by the presence of a variety of crystal defects such as dislocations, vacancies, stacking faults and increased number of particle boundaries. The presence of this defect structure enhances the diffusivity of solute hence the critical currents and magnetic flux pinning ability of MgB2 are improved. The aim of the present study is to determine the effects of process variables such as ball-to-powder mass ratio, size of balls, milling time, annealing temperature and contribution of process control agent (toluene on the product size, morphology and conversion level of precursor powders to MgB2 after subsequent heat treatment. The morphological analyses of the samples were performed by a high vacuum electron microscope ZEISS SUPRA VP 50. The phase compositions of the samples were performed with an Rigaku-Rint 2200 diffractometer, with nickel filtered Cu Kα radiation and conversion level. The MgB2 phase wt % was calculated by the Rietveld refinement method. The obtained results were discussed according to the process variables to find out their affect on the structure

  10. Characterization of cationic starch flocculants synthesized by dry process with ball milling activating method.

    Science.gov (United States)

    Su, Yuting; Du, Hongying; Huo, Yinqiang; Xu, Yongliang; Wang, Jie; Wang, Liying; Zhao, Siming; Xiong, Shanbai

    2016-06-01

    The cationic starch flocculants were synthesized by the reaction of maize starch which was activated by a ball-milling treatment with 2,3-epoxypropyl trimethyl ammonium chlorides (ETMAC) using the dry method. The cationic starches were characterized by several approaches including scanning electron microscope (SEM), degree of substitution (DS), infrared spectrum (IR), X-ray diffraction (XRD), flocculating activity, electron spin resonance (ESR), and solid-state nuclear magnetic resonance (NMR). The effect of mechanical activation on starch etherifying modification was investigated. The mechanical activation cracked starch granules and destructed their crystal structures. This resulted in enhancements to the reaction activity and reaction efficiency, which was approved by ESR and solid state NMR. The starch flocculants, synthesized by the reaction of mechanically activated starches at 90°C for 2.5h with ETMAC at molar ratio of 0.40:1.00, showed good flocculation activity. The substitution degree (0.300) and reaction efficiency (75.06%) of starch flocculants synthesized with mechanically activated starches were significantly greater than those of starch flocculants with native starches (P<0.05). Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Curie temperature and magnetic properties of aluminum doped barium ferrite particles prepared by ball mill method

    Science.gov (United States)

    Chen, Daming; Harward, Ian; Baptist, Joshua; Goldman, Sara; Celinski, Zbigniew

    2015-12-01

    Barium ferrite has attracted considerable interest in the fields of permanent magnets and perpendicular magnetic recording due to its strong uniaxial anisotropy and high Curie temperature (Tc). We prepared aluminum doped barium ferrite ceramics (BaAlxFe12-xO19, 0≤x≤6) by the ball mill method. The powder was milled for 96 h, and after forming pellets, annealed for 48 h in air at 1000 °C. The X-ray diffraction (XRD) data show that there are only single hexagonal phases in the samples without any impurity phase. The crystal lattice constants, a and c, were calculated by Cohen's method. Both a and c decrease with increasing x, ranging from 0.588 nm and 2.318 nm to 0.573 nm and 2.294 nm, respectively. A Vibrating Sample Magnetometer (VSM) and Superconducting Quantum Interference Device (SQUID) were used to investigate Tc and magnetic properties of BaFe12-xAlxO19. It is found that Tc decreases with increasing x, from 425 °C to 298 °C. It is also found that the saturated magnetization (4πMs) decreases with increasing x, while the coercivity (Hc) increases with the increase in x. The anisotropy field was also determined from the SQUID measurement.

  12. Synthesis and characterization of ball milled Fe-doped ZnO diluted magnetic semiconductor

    Institute of Scientific and Technical Information of China (English)

    R. Elilarassi; G. Chandrasekaran

    2012-01-01

    Fe-doped ZnO (Zn0.99Fe0.01O) powders are successfully prepared by ball milling with different milling time,and are investigated using X-ray diffraction (XRD),scanning electron microscope (SEM),ultraviolet-visible (UV-VIS) spectroscopy,vibrating sample magnetometer (VSM) and electron paramagnetic resonance (EPR) spectroscopy.The structural analysis using XRD reveals that the Fe-doped ZnO milled at different milling time can crystallize in a wurtzite structure,and in the XRD patterns,the secondary phase related to Fe cluster with the sensitivity of the XRD instrument can not be found.The SEM image of the sample milled for 24 h shows the presence of spherical nanoparticles.From the optical analysis,the optical band gap is found to decrease with increasing the milling time,which indicates the incorporation of Fe2+ ions into the ZnO lattice.The magnetization measurement using VSM reveals that the nanoparticles exhibit ferromagnetic behavior at room temperature,and the magnetization increases gradually with increasing the milling time.The conclusion is further confirmed by the electron paramagnetic resonance of the nanoparticles examined at room temperature,which shows an intense and broad ferromagnetic resonance signal related to Fe ions.

  13. Ultrafine Sm-Fe-N Particles Prepared by Planetary Ball Milling

    Directory of Open Access Journals (Sweden)

    Neil D.

    2013-01-01

    Full Text Available Ultrafine magnetically hard particles are needed for the bottom­up fabrication of anisotropic exchanged­coupled permanent magnets. In this study we have chosen Sm2Fe17Nx because of its high anisotropy field and large saturation magnetization. A multi­stage planetary ball milling process was used. The key is to find the right balance of energy used to mill the precursor particles; it must be high enough to break the particles and reduce their size but, not so high as to destroy the crystal structure of the nanoparticles that would lead to deterioration of the magnetic properties. First the coarse powders were subjected to a wet milling with 2.0 mm diameter media. In each subsequent stage the media size was reduced to maintain the milling balance. Using such a process produced particles in a size range from 100 - 800 nm with a coercivity as high as 10 kOe at room temperature.

  14. Magnetic properties of ball-milled nanocrystalline alloys Fe sub 7 sub 8 B sub 1 sub 3 Si sub 9

    CERN Document Server

    Pekala, M; Jachimowicz, M

    2002-01-01

    Magnetic properties of nanocrystalline Fe sub 7 sub 8 B sub 1 sub 3 Si sub 9 alloys are studied for three series prepared by ball milling starting from amorphous ribbons, crystallized ribbons, and elemental powders. Temperature variation of static magnetization results in strong ferromagnetic interaction which is weakly dependent on the initial material. Magnetic hysteresis loops show that saturation magnetization, magnetic remanence, and coercive field increase with frequency for both series of ribbon samples, whereas they decrease for alloys prepared from elemental powders. Power losses raise faster for the alloys prepared from elemental powders than for the two other alloys. (author)

  15. Kicking Velocity and Effect on Match Performance When using a Smaller, Lighter Ball in Women’s Football

    DEFF Research Database (Denmark)

    Andersen, Thomas Bull; Krustrup, Peter; Bendiksen, Mads;

    2016-01-01

    The present study evaluated the effect of a smaller, lighter ball on kicking speed and technical-tactical and physical match performance in high-level adult female footballers. In the laboratory test setting, the peak ball velocity was 6% higher with the new ball (NB) than the standard ball (SB...... in passing success rate (NB: 68±1% and SB: 68±1%, p>0.05). In conclusion, high-level adult female footballers had a higher kicking speed when using a smaller, lighter ball, but no differences were observed during match-play with the 2 ball types in respect of technical-tactical and physical match performance...

  16. Macromolecular crystallization and crystal perfection

    CERN Document Server

    Chayen, Naomi E; Snell, Edward H

    2010-01-01

    Structural biology is key to our understanding of the mechanisms of biological processes. This text describes current methods and future frontiers in crystal growth and use of X-ray and neutron crystallography, in the context of automation of crystallization and generation of synchrotron X-ray and neutron beams.

  17. Distinctive features of a crystal, crystal-like properties of a liquid and atomic quantum effects

    Science.gov (United States)

    Pavlov, V. V.

    2008-02-01

    It is believed that 'a crystal is similar to the crowd which is tightly compressed within enclosed space' and its structure in the simplest case is similar to the closest ball packing. Based on this assumption the strength of a crystal, long range ordering, the granular structure, capability for polymorphic transformation etc. were deduced. In a liquid such properties are impossible even in feebly marked form. However some of crystal-like features of melts are revealed in experiments and they frequently remain unacknowledged with a theory. From the other hand, computer model of crystal does not give even listed distinctive features of a crystal state. In the classical model the solidification more than to sunflower oil consistence was not obtained. It is possible to reach the real solidification if quantum 'freezing' of a part of atomic degrees of freedom would taken into account and any movement would stopped at zero energy level. There are some reasons to believe that another crystal properties and corresponding crystal-like features of liquids also can be got basing on these atomic quantum effects. In this case the reasons of many discussions on 'heredity', 'memory' of liquid and its microheterogeneity disappear.

  18. Liquid crystal tunable photonic crystal dye laser

    DEFF Research Database (Denmark)

    Buss, Thomas; Christiansen, Mads Brøkner; Smith, Cameron

    2010-01-01

    We present a dye-doped liquid crystal laser using a photonic crystal cavity. An applied electric field to the liquid crystal provides wavelength tunability. The photonic crystal enhances resonant interaction with the gain medium....

  19. Lubrication of an 85-mm ball bearing with RP-1

    Science.gov (United States)

    Addy, Harold E., Jr.; Schuller, Fredrick T.

    1993-01-01

    A parametric experimental investigation of an 85 millimeter bore angular contact ball bearing running in RP-1 fuel was performed at speeds of 10,000 to 24,000 rpm. Thrust loads were varied from 4450 to 17,800 Newtons (1000 to 4000 lbs.). Radial loads were varied from 1335 to 13,350 Newtons (300 to 3000 lbs.). RP-1 lubrication for the bearing was provided through a stationary jet ring located adjacent to the test bearing outer ring. Increases in both the thrust and radial loads resulted in increased bearing temperature, while increases in shaft speed resulted in much more dramatic increases in bearing temperature. These trends are typical for ball bearings operating under these types of conditions. Results are given for outer ring temperatures of the test bearing at the various test conditions employed. In addition, the heat energy removed from the bearing by the RP-1 was determined by measuring the increase in temperature as the RP-1 passed through the bearing. Results showed that the amount of heat energy removed by the RP-1 increased with both shaft speed and RP-1 flow rate to the bearing.

  20. Scattering solution of a ball by a bat

    CERN Document Server

    Cabo, Alejandro; Gonzalez, Carlos

    2011-01-01

    The problem of the mechanical evolution of a shock between a cylindrically symmetric bat and a spherical ball is solved in the strict rigid approximation for arbitrary values of the initial conditions. The friction during the impact is assumed to satisfy the standard rules. When the only source of energy dissipation is friction, the problem is fully solved by determining the separation point between the bodies. It also follows that whatever the character of any additional form of dissipation is, it only affects the ending value of the net impulse I done by the normal force of the bat on the ball at separation, but not the dynamical evolution with the value of I during the shock process. A relation determining whether the contact points of the two bodies slides between them or become at rest (to be pure rotation state) at the end of the impact, is determined for the case of the purely frictional energy dissipation. The solution is also generalized to include losses in addition to the frictional ones and then a...

  1. Computing the Ball Size of Frequency Permutations under Chebyshev Distance

    CERN Document Server

    Shieh, Min-Zheng

    2011-01-01

    Let $S_n^\\lambda$ be the set of all permutations over the multiset $\\{\\overbrace{1,...,1}^{\\lambda},...,\\overbrace{m,...,m}^\\lambda\\}$ where $n=m\\lambda$. A frequency permutation array (FPA) of minimum distance $d$ is a subset of $S_n^\\lambda$ in which every two elements have distance $d$. FPAs have many applications related to error correcting codes. In coding theory, the Gilbert-Varshamov bound and the sphere-packing bound are derived from the size of balls of certain radii. We propose two efficient algorithms that compute the ball size of frequency permutations under Chebyshev distance. Both methods extend previous known results. The first one runs in $O\\left({2d\\lambda \\choose d\\lambda}^{2.376}\\log n\\right)$ time and $O\\left({2d\\lambda \\choose d\\lambda}^{2}\\right)$ space. The second one runs in $O\\left({2d\\lambda \\choose d\\lambda}{d\\lambda+\\lambda\\choose \\lambda}\\frac{n}{\\lambda}\\right)$ time and $O\\left({2d\\lambda \\choose d\\lambda}\\right)$ space. For small constants $\\lambda$ and $d$, both are efficient ...

  2. Performance of hybrid ball bearings in oil and jet fuel

    Science.gov (United States)

    Schrader, Stephen M.; Pfaffenberger, Eugene E.

    1992-07-01

    A 308-size hybrid ball bearing, with ceramic balls and steel rings, was tested using a diester oil and gas turbine fuel as lubricants at several speeds and loads. Heat generation data from this test work was then correlated with the heat generation model from a widely used computer code. The ability of this hybrid split inner ring bearing design to endure thrust reversals, which are expected in many turbine applications, was demonstrated. Finally, the bearing was successfully endurance tested in JP-10 fuel for 25 hours at 7560 N axial load and 36,000 rpm. This work has successfully demonstrated the technology necessary to use fuel-lubricated hybrid bearings in limited-life gas turbine engine applications such as missiles, drones, and other unmanned air vehicles (UAVs). In addition, it has provided guidance for use in designing such bearing systems. As a result, the benefits of removing the conventional oil lubricant system, i.e., design simplification and reduced maintenance, can be realized.

  3. Poisson-Nernst-Planck equations in a ball

    CERN Document Server

    Cartailler, Z Schuss J

    2015-01-01

    The Poisson Nernst-Planck equations for charge concentration and electric potential in a ball is a model of electro-diffusion of ions in the head of a neuronal dendritic spine. We study the relaxation and the steady state when an initial charge of ions is injected into the ball. The steady state equation is similar to the Liouville-Gelfand-Bratu-type equation with the difference that the boundary condition is Neumann, not Dirichlet and there a minus sign in the exponent of the exponential term. The entire boundary is impermeable to the ions and the electric field satisfies the compatibility condition of Poisson's equation. We construct a steady radial solution and find that the potential is maximal in the center and decreases toward the boundary. We study the limit of large charge in dimension 1,2 and 3. For the case of a small absorbing window in the sphere, we find the escape rate of an ion from the steady density.

  4. Critical flaw size in silicon nitride ball bearings

    Science.gov (United States)

    Levesque, George Arthur

    Aircraft engine and bearing manufacturers have been aggressively pursuing advanced materials technology systems solutions to meet main shaft-bearing needs of advanced military aircraft engines. Ceramic silicon nitride hybrid bearings are being developed for such high performance applications. Though silicon nitride exhibits many favorable properties such as high compressive strength, high hardness, a third of the density of steel, low coefficient of thermal expansion, and high corrosion and temperature resistance, they also have low fracture toughness and are susceptible to failure from fatigue spalls emanating from pre-existing surface flaws that can grow under rolling contact fatigue (RCF). Rolling elements and raceways are among the most demanding components in aircraft engines due to a combination of high cyclic contact stresses, long expected component lifetimes, corrosive environment, and the high consequence of fatigue failure. The cost of these rolling elements increases exponentially with the decrease in allowable flaw size for service applications. Hence the range of 3D non-planar surface flaw geometries subject to RCF is simulated to determine the critical flaw size (CFS) or the largest allowable flaw that does not grow under service conditions. This dissertation is a numerical and experimental investigation of surface flaws in ceramic balls subjected to RCF and has resulted in the following analyses: Crack Shape Determination: the nucleation of surface flaws from ball impact that occurs during the manufacturing process is simulated. By examining the subsurface Hertzian stresses between contacting spheres, their applicability to predicting and characterizing crack size and shape is established. It is demonstrated that a wide range of cone and partial cone cracks, observed in practice, can be generated using the proposed approaches. RCF Simulation: the procedure and concerns in modeling nonplanar 3D cracks subject to RCF using FEA for stress intensity

  5. Crystal Dislocations

    Directory of Open Access Journals (Sweden)

    Ronald W. Armstrong

    2016-01-01

    Full Text Available Crystal dislocations were invisible until the mid-20th century although their presence had been inferred; the atomic and molecular scale dimensions had prevented earlier discovery. Now they are normally known to be just about everywhere, for example, in the softest molecularly-bonded crystals as well as within the hardest covalently-bonded diamonds. The advent of advanced techniques of atomic-scale probing has facilitated modern observations of dislocations in every crystal structure-type, particularly by X-ray diffraction topography and transmission electron microscopy. The present Special Issue provides a flavor of their ubiquitous presences, their characterizations and, especially, their influence on mechanical and electrical properties.

  6. Impact Velocity and Coefficient of Restitution for a Tennis Ball Impacting a Tennis Racquet

    Directory of Open Access Journals (Sweden)

    Mongkol Sukpraprut

    2015-01-01

    Full Text Available The impact and exit velocities of a tennis ball impacting on a fixed tennis racquet were measured with high speed video analysis to determine the coefficient of restitution (COR. It was found that there is a negative linear relationship between the COR and the impact velocity of the ball for velocities between 13 and 36 m/s.

  7. The high order Schwarz-Pick lemma on complex Hilbert balls

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this paper we prove a high order Schwarz-Pick lemma for holomorphic mappings between unit balls in complex Hilbert spaces.In addition,a Schwarz-Pick estimate for high order Fréchet derivatives of a holomorphic function f of a Hilbert ball into the right half-plane is obtained.

  8. EMBEDDED CONTROLLER BUILDING FOR BALL AND BEAM SYSTEM USING OPTIMAL CONTROL SYNTHESIS

    Directory of Open Access Journals (Sweden)

    B. M. HUNG

    2017-06-01

    Full Text Available The controller design for the Ball and Beam system is particularly crucial in the aviation fields due to its likeness to the aircraft control during the flight and landing under turbulent. Since the actual tests on the aircrafts are not possible, the Ball and Beam system could be necessary as an alternative to these manoeuvring. In addition, the ball and beam system is a nonlinear dynamical model intended to test various control algorithms. The complete system includes a ball, a beam, a motor and several sensors. The input torque is generated from the motor to control the position of the ball on the beam, where the ball rolls on the beam freely. The concise mathematical model has been obtained by linearized around the horizontal region. The presented control strategies are based on the optimal control synthesis including LQR and H2 optimization to manipulate the complete ball-beam system. These control algorithms have been successfully tested to figure out the control performance for specific applications. Finally, the control systems are implemented in the real ball and beam system with a data acquisition card of DSP F28335.

  9. Ball flight kinematics, release variability and in-season performance in elite baseball pitching.

    Science.gov (United States)

    Whiteside, D; McGinnis, R S; Deneweth, J M; Zernicke, R F; Goulet, G C

    2016-03-01

    The purpose of this study was to quantify ball flight kinematics (ball speed, spin rate, spin axis orientation, seam orientation) and release location variability in the four most common pitch types in baseball and relate them to in-season pitching performance. Nine NCAA Division I pitchers threw four pitching variations (fastball, changeup, curveball, and slider) while a radar gun measured ball speed and a 600-Hz video camera recorded the ball trajectory. Marks on the ball were digitized to measure ball flight kinematics and release location. Ball speed was highest in the fastball, though spin rate was similar in the fastball and breaking pitches. Two distinct spin axis orientations were noted: one characterizing the fastball and changeup, and another, the curveball and slider. The horizontal release location was significantly more variable than the vertical release location. In-season pitching success was not correlated to any of the measured variables. These findings are instructive for inferring appropriate hand mechanics and spin types in each of the four pitches. Coaches should also be aware that ball flight kinematics might not directly relate to pitching success at the collegiate level. Therefore, talent identification and pitching evaluations should encompass other (e.g., cognitive, psychological, and physiological) factors.

  10. Physical and Tribological Properties of Nitrided AISI 316 Stainless Steel Balls

    Directory of Open Access Journals (Sweden)

    Yang Shicai

    2016-01-01

    Full Text Available AISI 316 austenitic stainless steel balls (diameters 5.0 and 12.0 mm, typical hardness 250 HV0.3 and flat samples (20×20×2.0 mm were nitrided by a pulsed glow discharge Ar/N2 plasma. Hardness of the ball surfaces was analysed using Vickers indentation. Thermal stability of the nitrided balls (diameter 12.0 mm was studied using a furnace to heat them in air for 8 hours at temperatures up to 700.0°C and then, after cooling to room temperature, the surface hardness of the heated balls was re-measured. Scanning electron microscopy and X-ray diffraction were used to study the microstructures, composition and phase formation of the nitrided sublayers. Unlubricated pin-on-disc wear testing was used to evaluate the wear resistance of nitrided stainless steel balls (5.0 mm diameter and the results were compared with similar testing on hardened Cr-Steel balls (5 mm diameter with hardness of about 650 HV0.3. All the test results indicated that the nitrided AISI 316 austenitic stainless steel balls have advantages over the hardened Cr-Steel balls in terms of retaining high hardness after heat treatment and high resistance to sliding wear at room temperature under higher counterpart stress. These properties are expected to be beneficial for wide range of bearing applications.

  11. Determining the Viscosity of Liquids Using an Extended Falling Ball Method

    Science.gov (United States)

    Houari, Ahmed

    2011-01-01

    In this article, I will extend the falling ball method to measure the viscosity of liquids regardless of the degree of their viscosity. For this, I will show that one can obtain a measurement of the terminal velocity of a falling spherical ball in a viscous liquid by solving numerically the equation of motion which describes the dynamics of the…

  12. Contributions of Stephen J. Ball to the Research on Educational and Curriculum Policies in Brazil

    Science.gov (United States)

    Mainardes, Jefferson; Gandin, Luis Armando

    2013-01-01

    This article aims at showcasing the main contributions of Stephen J. Ball to educational research in Brazil, particularly to the study of educational and curriculum policies. We also highlight some of the limitations in the incorporation of Ball's ideas in Brazil as well as some of the challenges that these author's ideas pose to…

  13. 77 FR 33159 - Ball Bearings and Parts Thereof From France, Germany, and Italy: Preliminary Results of...

    Science.gov (United States)

    2012-06-05

    ... rates based entirely on facts available. See Ball Bearings and Parts Thereof From France, Germany, Italy... International Trade Administration Ball Bearings and Parts Thereof From France, Germany, and Italy: Preliminary... France, Germany, and Italy for the period May 1, 2010, through April 30, 2011. We have preliminarily...

  14. VirialRelation for Compact Q-Balls in the Complex Signum-Gordon Model

    Institute of Scientific and Technical Information of China (English)

    王华文; 程红波

    2011-01-01

    The properties of Q-balls in the complex signum-Gordon model in d spatial dimensions is studied.We obtain a general virial relation for this kind of Q-ball in higher-dimensional spacetime.We compute the energy and radii of a Q-ball with a V-shaped field potential as a function of spatial dimensionality and a parameter defining the model potential energy density to show that this kind of Q-ball can also survive stably in high-dimensional spacetime.%The properties of Q-balls in the complex signum-Gordon model in d spatial dimensions is studied. We obtain a general virial relation for this kind of Q-ball in higher-dimensional spacetime. We compute the energy and radii of a Q-ball with a V-shaped field potential as a function of spatial dimensionality and a parameter defining the model potential energy density to show that this kind of Q-ball can also survive stably in high-dimensional spacetime.

  15. Ammonia synthesis over multi-promoted iron catalysts obtained by high-energy ball-milling

    DEFF Research Database (Denmark)

    Jacobsen, C.J.H.; Jiang, Jianzhong; Mørup, Steen

    1999-01-01

    The feasibility of producing ammonia synthesis catalysts from high-energy ball-milling of a simple mixture of the constituent oxides has been investigated. The effect of ball-milling the fused oxidic precursor of the industrial KM1 ammonia synthesis catalyst has also been studied. The results show...

  16. An analytical model for force prediction in ball nose micro milling of inclined surfaces

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Hansen, Hans Nørgaard; De Chiffre, Leonardo

    2010-01-01

    Ball nose micro milling is a key process for the generation of free form surfaces and inclined surfaces often present in mould inserts for micro replication. This paper presents a new cutting force model for ball nose micro milling that is capable of taking into account the effect of the edge rad...

  17. Wear-resistant ball bearings for space applications. [coated with titanium carbide

    Science.gov (United States)

    Boving, H.; Hintermann, H. E.; Haenni, W.; Bondivenne, E.; Boeto, M.; Conde, M.

    1977-01-01

    Ball bearings for hostile environments were developed. They consist of normal ball bearing steel parts of which the rings are coated with hard, wear-resistant, chemical vapor deposited (C.V.D) TiC. Experiments in ultrahigh vacuum, using cages of various materials with self-lubricating properties, have shown that such bearings are suitable for space applications.

  18. Space Shuttle Orbital Maneuvering Subsystem (OMS) Engine Propellant Leakage Ball-Valve Shaft Seals

    Science.gov (United States)

    Lueders, Kathy; Buntain, Nick; Fries, Joseph (Technical Monitor)

    1999-01-01

    Evidence of propellant leakage across ball-valve shaft seals has been noted during the disassembly of five flight engines and one test engine at the NASA Lyndon B. Johnson Space Center, White Sands Test Facility. Based on data collected during the disassembly of these five engines, the consequences of propellant leakage across the ball-valve shaft seals can be divided into four primary areas of concern: Damage to the ball-valve pinion shafts, damage to sleeved bearings inside the ball-valve and actuator assemblies, degradation of the synthetic rubber o-rings used in the actuator assemblies, and corrosion and degradation to the interior of the actuator assemblies. The exact time at which leakage across the ball-valve shaft seals occurs has not been determined, however, the leakage most likely occurs during engine firings when, depending on the specification used, ball-valve cavity pressures range as high as 453 to 550 psia. This potential pressure range for the ball-valve cavities greatly exceeds the acceptance leakage test pressure of 332 psia. Since redesign and replacement of the ball-valve shaft seals is unlikely, the near term solution to prevent damage that occurs from shaft-seal leakage is to implement a routine overhaul and maintenance program for engines in the fleet. Recommended repair, verification, and possible preventative maintenance measures are discussed in the paper.

  19. 78 FR 9674 - Ball Bearings and Parts Thereof From Germany: Preliminary Results of Antidumping Duty...

    Science.gov (United States)

    2013-02-11

    ... International Trade Administration Ball Bearings and Parts Thereof From Germany: Preliminary Results of... thereof from Germany. The period of review (POR) is May 1, 2011, through September 14, 2011.\\1\\ We..., 2011, the Department revoked the order on ball bearings and parts thereof from Germany as...

  20. 75 FR 3444 - Ball Bearings and Parts Thereof From Germany: Initiation of Antidumping Duty Changed...

    Science.gov (United States)

    2010-01-21

    ... International Trade Administration Ball Bearings and Parts Thereof From Germany: Initiation of Antidumping Duty... the antidumping duty order on ball bearings and parts thereof from Germany with respect to myonic GmbH... spherical plain bearings and parts thereof from Germany on May 15, 1989. See Antidumping Duty Orders:...

  1. Sport-Based Youth and Community Development: Beyond the Ball in Chicago

    Science.gov (United States)

    Jacobs, Jennifer M.; Castañeda, Amy; Castañeda, Rob

    2016-01-01

    Rob and Amy Castañeda, the co-founders of a sports/play-based youth and community development organization called Beyond the Ball (www.beyondtheball.org), cite the collaborative and dynamic nature of the TPSR Alliance as an important influence for their work. Beyond the Ball serves individuals between kindergarten and post-college, in the North…

  2. Observation of Classroom Performance Using Therapy Balls as a Substitute for Chairs in Elementary School Children

    Science.gov (United States)

    Burgoyne, Molly E.; Ketcham, Caroline J.

    2015-01-01

    Many classrooms are beginning to substitute standard chairs with therapy balls, which help to improve students' focus and classroom performance, according to teacher and student reports. Researchers conducted an observational study in a classroom at a local elementary school that implemented therapy balls. For each hour-long observation, three…

  3. A Primer on Vibrational Ball Bearing Feature Generation for Prognostics and Diagnostics Algorithms

    Science.gov (United States)

    2015-03-01

    Steinbuch, Eindhoven University of Technology)34 ................................................................35 List of Tables Table 1 Definition ...case, a ball bearing is shown. There are other bearing constructions that use taper cylinder components in place of the roller ball, but the principles...predicting service life based on known operating conditions using a “model” based approach, but should be used cautionary. Other definitions of

  4. A ball-bearing structured triboelectric nanogenerator for nondestructive damage and rotating speed measurement

    Science.gov (United States)

    Li, Xiao Hui; Han, Chang Bao; Jiang, Tao; Zhang, Chi; Wang, Zhong Lin

    2016-02-01

    A ball-bearing structure based triboelectric nanogenerator (B-TENG) with interdigitative-electrodes was developed that can not only collect energy from rotational kinetic energy, but also serve as a self-powered and multifunctional sensor. The B-TENG relies on the rolling electrification between PTFE balls on Cu interdigitative-electrodes, which delivers an open-circuit voltage of ∼40 V and a short-circuit current of ∼1.2 μA at a rotating speed of 300 rpm for 4 mm PTFE balls. Using the output signals of B-TENG, a nondestructive detection for the damage of PTFE balls was realized without demounting the bearing. Besides, based on the periodic signals produced from B-TENG, the rotation speed of ball-bearing can be obtained according to the time difference between several cycles.

  5. Structure Design and Performance Analysis of High-Speed Miniature Ball Bearing

    Science.gov (United States)

    Li, Songsheng; Zhang, Guoye; Chen, Bin; Shen, Yuan

    2017-07-01

    The working performances of miniature ball bearings are obviously affected by its’ geometric structure parameters. In this paper, quasi-static analysis theory is applied in the design of miniature ball bearings. Firstly, it is studied the influence of geometry structure, preload and rotating speed on the dynamic performance of bearing. Secondly, bearing dynamic characteristics are analyzed which include the bearing stiffness and Spin to roll Ratio. Lastly, the contact stress and bearing life are calculated. The results indicate that structure parameters play an importance role in bearing’s dynamic performances. Miniature ball bearings which have lager ball number, bigger ball diameter and smaller inner race groove radius can get better performances while velocity and preload have great impact on the bearing life. So that parameters of miniature bearing should be chosen cautiously.

  6. Development of a table tennis robot for ball interception using visual feedback

    Science.gov (United States)

    Parnichkun, Manukid; Thalagoda, Janitha A.

    2016-07-01

    This paper presents a concept of intercepting a moving table tennis ball using a robot. The robot has four degrees of freedom(DOF) which are simplified in such a way that The system is able to perform the task within the bounded limit. It employs computer vision to localize the ball. For ball identification, Colour Based Threshold Segmentation(CBTS) and Background Subtraction(BS) methodologies are used. Coordinate Transformation(CT) is employed to transform the data, which is taken based on camera coordinate frame to the general coordinate frame. The sensory system consisted of two HD Web Cameras. The computation time of image processing from web cameras is long .it is not possible to intercept table tennis ball using only image processing. Therefore the projectile motion model is employed to predict the final destination of the ball.

  7. Preparation and performance research of Ce-TiO2/KL ball photocatalysts

    Institute of Scientific and Technical Information of China (English)

    于晓娟; 熊领领; 马国平; 梁愿; 刘奎仁

    2014-01-01

    The Ce-TiO2/KL (diatomite) ball photocatalyst was prepared and characterized based on the pretreated diatomite. The re-sults showed that comparing with the crude diatomite, proper pretreatment could significantly improve its SiO2 purity and specific surface area. The surface of diatomite was clear with uniform pore structure and big pore size. With diatomite ball as carrier, the sup-ported Ce-TiO2/KL ball photocatalyst was prepared by sol-gel method. The photocatalytic performances of the supported Ce-TiO2/ KL ball and Ce-TiO2/KL powder photocatalysts under various preparation conditions were studied in view of photocatalytic degrada-tion rate of Rhodamine B (Rh B) solution. The degradation rate of the ball photocatalysts for Rh B reached 94.6% and could be re-used for many times, which showed much better photocatalytic performance and stability than powder photocatalysts.

  8. Electric field strength of charged conducting balls and the breakdown of the air gap between them

    Energy Technology Data Exchange (ETDEWEB)

    Saranin, Vladimir A [Department of Physics, V.G. Korolenko Glazov State Pedagogical Institute, Glazov (Russian Federation)

    2002-12-31

    Field amplification factors at the surfaces of two charged conducting balls are calculated numerically. It is shown that as the balls are brought closer together, except when their potentials are equal, the amplification factors go to infinity, and in the case of like-charged balls the field at the surface of one of them changes sign. Breakdown field strengths for the air gap between balls of a different diameter are calculated using the experimental data of other authors as the base. The results suggest that the minimum breakdown field strength is 26 kV cm{sup -1} . The author's earlier results on the interaction force between the balls are revised. (methodological notes)

  9. A real-time surface inspection system for precision steel balls based on machine vision

    Science.gov (United States)

    Chen, Yi-Ji; Tsai, Jhy-Cherng; Hsu, Ya-Chen

    2016-07-01

    Precision steel balls are one of the most fundament components for motion and power transmission parts and they are widely used in industrial machinery and the automotive industry. As precision balls are crucial for the quality of these products, there is an urgent need to develop a fast and robust system for inspecting defects of precision steel balls. In this paper, a real-time system for inspecting surface defects of precision steel balls is developed based on machine vision. The developed system integrates a dual-lighting system, an unfolding mechanism and inspection algorithms for real-time signal processing and defect detection. The developed system is tested under feeding speeds of 4 pcs s-1 with a detection rate of 99.94% and an error rate of 0.10%. The minimum detectable surface flaw area is 0.01 mm2, which meets the requirement for inspecting ISO grade 100 precision steel balls.

  10. Automatic Detection of Steel Ball's Surface Flaws Based on Image Processing

    Institute of Scientific and Technical Information of China (English)

    YU Zheng-lin; TAN Wei; YANG Dong-lin; CAO Guo-hua

    2007-01-01

    A new method to detect steel ball's surface flaws is presented based on computer techniques of image processing and pattern recognition. The steel ball's surface flaws is the primary factor causing bearing failure. The high efficient and precision detections for the surface flaws of steel ball can be conducted by the presented method, including spot, abrasion, burn, scratch and crack, etc. The design of main components of the detecting system is described in detail including automatic feeding mechanism, automatic spreading mechanism of steel ball's surface, optical system of microscope, image acquisition system, image processing system. The whole automatic system is controlled by an industrial control computer, which can carry out the recognition of flaws of steel ball's surface effectively.

  11. Extension of Relativistic-Microwave Theory of Ball Lightning Including Long-term Losses And Stability

    CERN Document Server

    Stephan, Karl D

    2016-01-01

    After centuries, the long-standing problem of the nature of ball lightning may be closer to a solution. The relativistic-microwave theory of ball lightning recently proposed by Wu accounts for many of the leading characteristics of ball lightning, which most previous theories have failed to do. It involves the impact of a lightning-caused relativistic electron bunch to soil, producing an EM pulse that forms a plasma bubble. While the theory presents a plausible account of ball-lightning formation, storing electromagnetic energy long enough to account for the observed lifetime of such objects was not demonstrated. Here we show how such a structure can develop the high Q factor (~10^10) needed for the observed lifetimes of ~seconds for ball lightning, and show that the structure is radially stable, given certain assumptions.

  12. Thermal Analysis of Ball screw Systems by Explicit Finite Difference Method

    Energy Technology Data Exchange (ETDEWEB)

    Min, Bog Ki [Hanyang Univ., Seoul (Korea, Republic of); Park, Chun Hong; Chung, Sung Chong [KIMM, Daejeon (Korea, Republic of)

    2016-01-15

    Friction generated from balls and grooves incurs temperature rise in the ball screw system. Thermal deformation due to the heat degrades positioning accuracy of the feed drive system. To compensate for the thermal error, accurate prediction of the temperature distribution is required first. In this paper, to predict the temperature distribution according to the rotational speed, solid and hollow cylinders are applied for analysis of the ball screw shaft and nut, respectively. Boundary conditions such as the convective heat transfer coefficient, friction torque, and thermal contact conductance (TCC) between balls and grooves are formulated according to operating and fabrication conditions of the ball screw. Explicit FDM (finite difference method) is studied for development of a temperature prediction simulator. Its effectiveness is verified through numerical analysis.

  13. An assessment of dioxin levels in processed ball clay from the United States

    Energy Technology Data Exchange (ETDEWEB)

    Ferrario, J.; Byrne, C. [USEPA, Stennis Space Ctr. Mississippi (United States); Schaum, J. [USEPA, Washington, DC (United States)

    2004-09-15

    Introduction The presence of dioxin-like compounds in ball clay was discovered in 1996 as a result of an investigation to determine the sources of elevated levels of dioxin found in two chicken fat samples from a national survey of poultry. The investigation indicated that soybean meal added to chicken feed was the source of dioxin contamination. Further investigation showed that the dioxin contamination came from the mixing of a natural clay known as ''ball clay'' with the soybean meal as an anti-caking agent. The FDA subsequently discontinued the use of contaminated ball clay as an anti-caking agent in animal feeds. The source of the dioxins found in ball clay has yet to be established. A comparison of the characteristic dioxin profile found in ball clay to those of known anthropogenic sources from the U.S.EPA Source Inventory has been undertaken, and none of those examined match the features found in the clays. These characteristic features together with the fact that the geologic formations in which the clays are found are ancient suggest a natural origin for the dioxins. The plasticity of ball clays makes them an important commercial resource for a variety of commercial uses. The percentage of commercial uses of ball clay in 2000 included: 29% for floor and wall tile, 24% for sanitary ware, 10% pottery, and 37% for other industrial and commercial uses. The total mining of ball clay in the U.S. for 2003 was 1.12 million metric tons. EPA is examining the potential for the environmental release of dioxins from the processing/use of ball clays and evaluating potential exposure pathways. Part of this overall effort and the subject of this study includes the analysis of dioxin levels found in commercially available ball clays commonly used in ceramic art studios.

  14. The formation of collective silk balls in the spider mite Tetranychus urticae Koch.

    Directory of Open Access Journals (Sweden)

    Gwendoline Clotuche

    Full Text Available Tetranychus urticae is a phytophagous mite that forms colonies of several thousand individuals. These mites construct a common web to protect the colony. When plants become overcrowded and food resources become scarce, individuals gather at the plant apex to form a ball composed of mites and their silk threads. This ball is a structure facilitating group dispersal by wind or animal transport. Until now, no quantitative study had been done on this collective form of migration. This is the first attempt to understand the mechanisms that underlie the emergence and growth of the ball. We studied this collective behaviour under laboratory conditions on standardized infested plants. Our results show that the collective displacement and the formation of balls result from a recruitment process: by depositing silk threads on their way up to the plant apex, mites favour and amplify the recruitment toward the balls. A critical threshold (quorum response in the cumulative flow of mites must be reached to observe the emergence of a ball. At the beginning of the balls formation, mites form an aggregate. After 24 hours, the aggregated mites are trapped inside the silk balls by the complex network of silk threads and finally die, except for recently arrived individuals. The balls are mainly composed of immature stages. Our study reconstructs the key events that lead to the formation of silk balls. They suggest that the interplay between mites' density, plant morphology and plant density lead to different modes of dispersions (individual or collective and under what conditions populations might adopt a collective strategy rather than one that is individually oriented. Moreover, our results lead to discuss two aspects of the cooperation and altruism: the importance of Allee effects during colonization of new plants and the importance of the size of a founding group.

  15. Micro glass ball embedded gels to study cell mechanobiological responses to substrate curvatures.

    Science.gov (United States)

    Lee, Sang Joo; Yang, Shengyuan

    2012-09-01

    The effects of substrate stiffness on cell behaviors have been extensively studied; however, the effects of substrate curvature are not well documented. The curvature of the surface to which cells adhere can have profound effects on cell behaviors. To reveal these cell mechanobiological responses to substrate curvatures, here we introduce a novel, unique, simple, and flexible class of substrates, polyacrylamide gels embedded with micro glass balls ranging in diameter from 5 μm to 2 mm, to culture cells. NIH-3T3 fibroblasts were cultured on these glass ball embedded gels. Morphologies of cells growing on glass balls were analyzed by using an optical microscope and a 3D confocal laser scanning microscope. The cell behaviors on micro cylindrical glass tubes having similar diameters to the glass balls were also compared. It is observed that the fibroblasts were sensitive to the curvatures of the glass balls. Significant differences in cell attachment rate, migration speed, and morphology were noted for cells cultured on glass balls of diameters at or below 500 μm, compared to those on glass balls of larger diameters. Cell spread area increased as a function of the ball diameter with three different slopes in the three distinct regions depending on the ball diameter. To the best of our knowledge, this is the first experimental attempt to study cell responses to spherically shaped substrates. These cell culture experiments imply that this class of substrates, micro glass ball embedded gels, can be useful tools to study cell mechanobiological responses to substrate curvatures, related cell and tissue engineering researches, and biomedical applications.

  16. « Penser base-ball »

    Directory of Open Access Journals (Sweden)

    Peter Marquis

    2012-06-01

    Full Text Available Vers 1900, les grandes villes américaines se dotèrent d’associations caritatives qui firent du sport l’instrument d’une revitalisation de la nation. Fruit de divers courants intellectuels, cette sportisation des œuvres de bienfaisance toucha directement Brooklyn et « ses » Dodgers. Dès l’inauguration du stade Ebbets Field en 1913 et plus encore à partir de 1943 durant la présidence de Branch Rickey, le club des Dodgers tissa des relations intimes avec les associations caritatives du borough, notamment via sa « Fondation pour le base-ball amateur ». Les œuvres qu’elle supervisait vantaient la pratique du base-ball pour ses bénéfices physiques, mais surtout pour la socialisation qu’elle offrait, perçue comme un antidote aux inquiétudes de l’époque. « Penser base-ball » signifiait bien plus que se concentrer sur les subtilités du jeu. Arme contre la « délinquance juvénile » et le communisme, le base-ball formait l’esprit de futurs citoyens et portait les valeurs que le pays, en recomposition après 1945, célébrait alors. Cette croyance, partagée par un entre-soi d’experts brooklynois de la jeunesse, reflétait et façonnait tout à la fois les attitudes et les représentations, notamment à l’égard des jeunes Africains-Américains, premiers oubliés de l’action caritative du club.Around 1900, large American cities saw the rise of charity organizations that instrumentalized sports to revitalize the nation. An outgrowth of various intellectual movements, the sportization of voluntary organizations directly affected Brooklyn and “its” Dodgers. From the opening of Ebbets Field in 1913, but especially from 1943 during the presidency of Branch Rickey, the Dodgers front-office cultivated strong ties with the borough’s charities via its own Brooklyn Amateur Baseball Foundation. The organizations it supervised lauded baseball for its physical benefits but especially for the socialization it

  17. A dynamic ball compression test for understanding rock crushing.

    Science.gov (United States)

    Huang, S; Liu, H; Xia, K

    2014-12-01

    During crushing, rock particles are subjected to complicated loading. It is desired to establish the relation between the loading and the fragmentation parameters for better understanding rock crushing mechanism. In this work, a split Hopkinson pressure bar system in combination with high speed cameras is utilized in the dynamic ball compression test, in which the spherical rock sample is adopted to avoid the shape effect. Using elasticity theory, the loading rate and the dynamic indirect tensile strength are first calculated. With the aid of the moment-trap technique and high speed cameras, the surface energy is determined for each sample. The relations between the loading rate and the fragmentation parameters, i.e., the number of fragments and the surface energy are established. The application of this method to a granitic rock shows that it is flexible and can be applied to the crushing study of generic brittle solids.

  18. The flow of two falling balls mixes rapidly

    Science.gov (United States)

    Bálint, Péter; Némedy Varga, András

    2016-09-01

    In this paper we study the system of two falling balls in continuous time. We model the system by a suspension flow over a two dimensional, hyperbolic base map. By detailed analysis of the geometry of the system we identify special periodic points and show that the ratio of certain periods in continuous time is Diophantine for almost every value of the mass parameter in an interval. Using results of Melbourne (2007 Trans. Am. Math. Soc. 359 2421-41) and our previous achievements (Bálint et al 2012 Chaos 22 026104) we conclude that for these values of the parameter the flow mixes faster than any polynomial. Even though the calculations are presented for the specific physical system, the method is quite general and can be applied to other suspension flows, too.

  19. Building micro-soccer-balls with evaporating colloidal fakir drops

    Science.gov (United States)

    Gelderblom, Hanneke; Marín, Álvaro G.; Susarrey-Arce, Arturo; van Housselt, Arie; Lefferts, Leon; Gardeniers, Han; Lohse, Detlef; Snoeijer, Jacco H.

    2013-11-01

    Drop evaporation can be used to self-assemble particles into three-dimensional microstructures on a scale where direct manipulation is impossible. We present a unique method to create highly-ordered colloidal microstructures in which we can control the amount of particles and their packing fraction. To this end, we evaporate colloidal dispersion drops from a special type of superhydrophobic microstructured surface, on which the drop remains in Cassie-Baxter state during the entire evaporative process. The remainders of the drop consist of a massive spherical cluster of the microspheres, with diameters ranging from a few tens up to several hundreds of microns. We present scaling arguments to show how the final particle packing fraction of these balls depends on the drop evaporation dynamics, particle size, and number of particles in the system.

  20. Incipient failure detection (IFD) of SSME ball bearings

    Science.gov (United States)

    1982-01-01

    Because of the immense noise background during the operation of a large engine such as the SSME, the relatively low level unique ball bearing signatures were often buried by the overall machine signal. As a result, the most commonly used bearing failure detection technique, pattern recognition using power spectral density (PSD) constructed from the extracted bearing signals, is rendered useless. Data enhancement techniques were carried out by using a HP5451C Fourier Analyzer. The signal was preprocessed by a Digital Audio Crop. DAC-1024I noise cancelling filter in order to estimate the desired signal corrupted by the backgound noise. Reference levels of good bearings were established. Any deviation of bearing signals from these reference levels indicate the incipient bearing failures.