WorldWideScience

Sample records for critical masses augmented

  1. Critical Mass

    CERN Multimedia

    AUTHOR|(CDS)2070299

    2017-01-01

    Critical Mass is a cycling event typically held on the last Friday of every month; its purpose is not usually formalized beyond the direct action of meeting at a set location and time and traveling as a group through city or town streets on bikes. The event originated in 1992 in San Francisco; by the end of 2003, the event was being held in over 300 cities around the world. At CERN it is held once a year in conjunction with the national Swiss campaing "Bike to work".

  2. Minimum critical mass systems

    International Nuclear Information System (INIS)

    Dam, H. van; Leege, P.F.A. de

    1987-01-01

    An analysis is presented of thermal systems with minimum critical mass, based on the use of materials with optimum neutron moderating and reflecting properties. The optimum fissile material distributions in the systems are obtained by calculations with standard computer codes, extended with a routine for flat fuel importance search. It is shown that in the minimum critical mass configuration a considerable part of the fuel is positioned in the reflector region. For 239 Pu a minimum critical mass of 87 g is found, which is the lowest value reported hitherto. (author)

  3. Bibliography on augmentation of convective heat and mass transfer

    International Nuclear Information System (INIS)

    Bergles, A.E.; Webb, R.L.; Junkhan, G.H.; Jensen, M.K.

    1979-05-01

    Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. A bibliography of world literature on augmentation is presented. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fourteen techniques are grouped in terms of their application to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 1,967, including 75 surveys of various techniques and 42 papers on performance evaluation of passive techniques. Patents are not included as they will be the subject of a future topical report

  4. Spent fuel critical masses and supportive measurements

    International Nuclear Information System (INIS)

    Toffer, H.; Wells, A.H.

    1987-01-01

    Critical masses for spent fuel are larger than for green fuel and therefore use of the increased masses could result in improved handling, storage, and transport of such materials. To apply spent fuel critical masses requires an assessment of fuel exposure and the corresponding isotopic compositions. The paper discusses several approaches at the Hanford N Reactor in establishing fuel exposure, including a direct measurement of spent to green fuel critical masses. The benefits derived from the use of spent fuel critical masses are illustrated for cask designs at the Nuclear Assurance Corporation. (author)

  5. Augmented kludge waveforms for detecting extreme-mass-ratio inspirals

    Science.gov (United States)

    Chua, Alvin J. K.; Moore, Christopher J.; Gair, Jonathan R.

    2017-08-01

    The extreme-mass-ratio inspirals (EMRIs) of stellar-mass compact objects into massive black holes are an important class of source for the future space-based gravitational-wave detector LISA. Detecting signals from EMRIs will require waveform models that are both accurate and computationally efficient. In this paper, we present the latest implementation of an augmented analytic kludge (AAK) model, publicly available at https://github.com/alvincjk/EMRI_Kludge_Suite as part of an EMRI waveform software suite. This version of the AAK model has improved accuracy compared to its predecessors, with two-month waveform overlaps against a more accurate fiducial model exceeding 0.97 for a generic range of sources; it also generates waveforms 5-15 times faster than the fiducial model. The AAK model is well suited for scoping out data analysis issues in the upcoming round of mock LISA data challenges. A simple analytic argument shows that it might even be viable for detecting EMRIs with LISA through a semicoherent template bank method, while the use of the original analytic kludge in the same approach will result in around 90% fewer detections.

  6. Critical heat flux, post dry-out and their augmentation

    International Nuclear Information System (INIS)

    Celata, G.P.; Mariani, A.

    1999-01-01

    The report shows the state of art review on the critical heat flux and the post-dryout heat transfer. The work, which is a merge of original researches carried out at the Institute of Thermal Fluid Dynamic of ENEA (National Agency for New Technology, Energy and the Environment) and a thorough review of the recent literature, is divided in four chapters: critical heat flux in subcooled flow boiling; critical heat flux in saturated flow boiling; post-dryout heat transfer; enhancement of critical heat flux and post-dryout heat transfer [it

  7. Critical heat flux, post dry-out and their augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Celata, G.P.; Mariani, A. [ENEA, Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy). Dipt. Energia

    1999-07-01

    The report shows the state of art review on the critical heat flux and the post-dryout heat transfer. The work, which is a merge of original researches carried out at the Institute of Thermal Fluid Dynamic of ENEA (National Agency for New Technology, Energy and the Environment) and a thorough review of the recent literature, is divided in four chapters: critical heat flux in subcooled flow boiling; critical heat flux in saturated flow boiling; post-dryout heat transfer; enhancement of critical heat flux and post-dryout heat transfer. [Italian] Si passa in rassegna lo stato dell'arte sulla crisi termica e sullo scambio termico post-crisi, che compendia studi tradizionali condotti dall'ENEA. Il rapporto e' suddiviso in quattro parti: crisi termica in ebollizione sottoraffreddata; crisi termica in ebollizione satura; scambio termico dopo la crisi termica; incremento del flusso termico critico e dello scambio termico post-crisi.

  8. Critical heat flux, post dry-out and their augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Celata, G P; Mariani, A [ENEA, Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy). Dipt. Energia

    1999-07-01

    The report shows the state of art review on the critical heat flux and the post-dryout heat transfer. The work, which is a merge of original researches carried out at the Institute of Thermal Fluid Dynamic of ENEA (National Agency for New Technology, Energy and the Environment) and a thorough review of the recent literature, is divided in four chapters: critical heat flux in subcooled flow boiling; critical heat flux in saturated flow boiling; post-dryout heat transfer; enhancement of critical heat flux and post-dryout heat transfer. [Italian] Si passa in rassegna lo stato dell'arte sulla crisi termica e sullo scambio termico post-crisi, che compendia studi tradizionali condotti dall'ENEA. Il rapporto e' suddiviso in quattro parti: crisi termica in ebollizione sottoraffreddata; crisi termica in ebollizione satura; scambio termico dopo la crisi termica; incremento del flusso termico critico e dello scambio termico post-crisi.

  9. Critical Thinking for Mass Communications Students.

    Science.gov (United States)

    Shoemaker, Pamela J.

    1993-01-01

    Describes one way of systematically teaching critical thinking skills in a journalism-mass communication program. Begins with a general discussion of critical thinking. Proceeds to the theory and structure underlying the course as it is taught at the Ohio State University School of Journalism. (RS)

  10. Los Alamos critical-mass data

    International Nuclear Information System (INIS)

    Paxton, H.C.

    1975-11-01

    The original version of this report tabulates critical masses of simple systems, which have been measured through the year 1963. This revision adds data through October 1975, and modifies some of the old critical specifications that have been reevaluated. The old format and symbolism are retained to simplify reproduction

  11. Critical Masses for Unreflected Metal Spheres

    International Nuclear Information System (INIS)

    Westfall, Robert Michael; Wright, Richard Q.

    2009-01-01

    Calculated critical masses of bare metal spheres for 28 actinide isotopes, using the SCALE/XSDRNPM one-dimensional, discrete-ordinates system, are presented. ENDF/B-VI, ENDF/B-VII, and JENDL-3.3 cross sections were used in the calculations. Results are given for isotopes of uranium, neptunium, plutonium, americium, curium, californium, and for one isotope of einsteinium. Calculated k values for these same nuclides are also given. We show that, for non-threshold or low-threshold fission nuclides, a good approximation for the nuclide k is the value of nubar at 1 MeV. A plot of the critical mass versus k values is given for 19 nuclides with A-numbers between 232 and 250. The peaks in the critical mass curve (for seven nuclides) correspond to dips in the k curve. For the seven cases with the largest critical mass, six are even-even nuclides. Neptunium-237, with a critical mass of about 62.7 kg (ENDF/B-VI calculation), has an odd number of protons and an even number of neutrons. However, two cases with quite small critical masses, 232U and 236Pu, are also even-even. These two nuclides do not exhibit threshold fission behavior like most other even-even nuclides. The largest critical mass is 208.8 kg for 243Am and the smallest is 2.44 kg for 251Cf. The calculated k values vary from 1.5022 for 234U to 4.4767 for 251Cf. A correlation between the calculated critical mass (kg) and the fission spectrum averaged value of is given for the elements U, Np, Pu, Am, Cm, and Cf. For each of the five elements, a fit to the data for that element is provided. In each case the fit employs a negative exponential of the form mass = exp(A + B ∼ ln). The values of A and B are element dependent and vary slightly for each of the five elements. The method described here is mainly applicable for non-threshold fission nuclides (15 of the 28 nuclides considered in this paper). There are three exceptions, 238Pu, 244Cm, and 250Cf, which all exhibit threshold fission behavior.

  12. Plant safety review from mass criticality accident

    International Nuclear Information System (INIS)

    Susanto, B.G.

    2000-01-01

    The review has been done to understand the resent status of the plant in facing postulated mass criticality accident. From the design concept of the plant all the components in the system including functional groups have been designed based on favorable mass/geometry safety principle. The criticality safety for each component is guaranteed because all the dimensions relevant to criticality of the components are smaller than dimensions of 'favorable mass/geometry'. The procedures covering all aspects affecting quality including the safety related are developed and adhered to at all times. Staff are indoctrinated periodically in short training session to warn the important of the safety in process of production. The plant is fully equipped with 6 (six) criticality detectors in strategic places to alert employees whenever the postulated mass criticality accident occur. In the event of Nuclear Emergency Preparedness, PT BATAN TEKNOLOGI has also proposed the organization structure how promptly to report the crisis to Nuclear Energy Control Board (BAPETEN) Indonesia. (author)

  13. Augmentation of DAA Staggered – Solution Equations in Underwater Shock Problems for Singular Structural Mass Matrices

    Directory of Open Access Journals (Sweden)

    John A. DeRuntz Jr.

    2005-01-01

    Full Text Available The numerical solution of underwater shock fluid – structure interaction problems using boundary element/finite element techniques became tractable through the development of the family of Doubly Asymptotic Approximations (DAA. Practical implementation of the method has relied on the so-called augmentation of the DAA equations. The fluid and structural systems are respectively coupled by the structural acceleration vector in the surface normal direction on the right hand side of the DAA equations, and the total pressure applied to the structural equations on its right hand side. By formally solving for the acceleration vector from the structural system and substituting it into its place in the DAA equations, the augmentation introduces a term involving the inverse of the structural mass matrix. However there exist at least two important classes of problems in which the structural mass matrix is singular. This paper develops a method to carry out the augmentation for such problems using a generalized inverse technique.

  14. Bibliography on augmentation of convective heat and mass transfer-II

    Energy Technology Data Exchange (ETDEWEB)

    Bergles, A.E.; Nirmalan, V.; Junkhan, G.H.; Webb, R.L.

    1983-12-01

    Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. This report presents and updated bibliography of world literature on augmentation. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fifteen techniques are grouped in terms of their applications to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 3045, including 135 surveys of various techniques and 86 papers on performance evaluation of passive techniques. Patents are not included, as they are the subject of a separate bibliographic report.

  15. Critical assessment of nuclear mass models

    International Nuclear Information System (INIS)

    Moeller, P.; Nix, J.R.

    1992-01-01

    Some of the physical assumptions underlying various nuclear mass models are discussed. The ability of different mass models to predict new masses that were not taken into account when the models were formulated and their parameters determined is analyzed. The models are also compared with respect to their ability to describe nuclear-structure properties in general. The analysis suggests future directions for mass-model development

  16. Implementing augmentative and alternative communication in critical care settings: Perspectives of healthcare professionals.

    Science.gov (United States)

    Handberg, Charlotte; Voss, Anna Katarina

    2018-01-01

    To describe the perspectives of healthcare professionals caring for intubated patients on implementing augmentative and alternative communication (AAC) in critical care settings. Patients in critical care settings subjected to endotracheal intubation suffer from a temporary functional speech disorder and can also experience anxiety, stress and delirium, leading to longer and more complicated hospitalisation and rehabilitation. Little is known about the use of AAC in critical care settings. The design was informed by interpretive descriptive methodology along with the theoretical framework symbolic interactionism, which guided the study of healthcare professionals (n = 48) in five different intensive care units. Data were generated through participant observations and 10 focus group interviews. The findings represent an understanding of the healthcare professionals' perspectives on implementing AAC in critical care settings and revealed three themes. Caring Ontology was the foundation of the healthcare professionals' profession. Cultural Belief represented the actual premise in the interactions during the healthcare professionals' work, saving lives in a biomedical setting whilst appearing competent and efficient, leading to Triggered Conduct and giving low priority to psychosocial issues like communication. Lack of the ability to communicate puts patients at greater risk of receiving poorer treatment, which supports the pressuring need to implement and use AAC in critical care. It is documented that culture in biomedical paradigms can have consequences that are the opposite of the staffs' ideals. The findings may guide staff in implementing AAC strategies in their communication with patients and at the same time preserve their caring ontology and professional pride. Improving communication strategies may improve patient safety and make a difference in patient outcomes. Increased knowledge of and familiarity with AAC strategies may provide healthcare professionals

  17. Critical mass variation of 239Pu with water dilution

    International Nuclear Information System (INIS)

    Pearlstein, S.

    1996-01-01

    The critical mass of an unreflected solid sphere of 239 Pu is ∼ 10 kg. The increase in critical mass observed for small water dilutions of unreflected 239 Pu spheres is paradoxical. Introducing small amounts of water uniformly throughout the sphere increases the spherical volume containing the same amount of 239 Pu as the critical solid sphere. The increase in radius decreases the surface-to-volume ratio of the sphere, which has the effect to first order of decreasing the neutron leakage, which is proportional to the surface, relative to the fissions, which are proportional to the volume. The reduction in neutron leakage is expected to reduce the critical mass, but instead, the critical mass is observed to increase. It is discussed how changes in the fast neutron spectrum with corresponding changes in the nuclear parameters result in an increase in critical mass for small water dilutions

  18. Dynamic Diversity: Toward a Contextual Understanding of Critical Mass

    Science.gov (United States)

    Garces, Liliana M.; Jayakumar, Uma M.

    2014-01-01

    Through an analysis of relevant social science evidence, this article provides a deeper understanding of critical mass, a concept that has become central in litigation efforts related to affirmative action admissions policies that seek to further the educational benefits of diversity. We demonstrate that the concept of critical mass requires an…

  19. Relationship between keff and the fraction of critical mass

    International Nuclear Information System (INIS)

    O'Dell, R.D.; Parsons, D.K.

    1997-01-01

    It is not universally understood that k eff and fractional critical mass are related in a non linear fashion. For example, a neutronic system with a k eff = 0. 95 is NOT at 95% of its critical mass. What is striking is just how non-linear the relationship between k eff and critical mass really is. This relationship is investigated and documented below for both unfavorable (i.e., very reactive) and favorable (less reactive) geometries. The implications of this non-linearity for criticality safety regulation will also be discussed

  20. Augmented Renal Clearance in Critical Illness: An Important Consideration in Drug Dosing

    Directory of Open Access Journals (Sweden)

    Sherif Hanafy Mahmoud

    2017-09-01

    Full Text Available Augmented renal clearance (ARC is a manifestation of enhanced renal function seen in critically ill patients. The use of regular unadjusted doses of renally eliminated drugs in patients with ARC might lead to therapy failure. The purpose of this scoping review was to provide and up-to-date summary of the available evidence pertaining to the phenomenon of ARC. A literature search of databases of available evidence in humans, with no language restriction, was conducted. Databases searched were MEDLINE (1946 to April 2017, EMBASE (1974 to April 2017 and the Cochrane Library (1999 to April 2017. A total of 57 records were included in the present review: 39 observational studies (25 prospective, 14 retrospective, 6 case reports/series and 12 conference abstracts. ARC has been reported to range from 14–80%. ARC is currently defined as an increased creatinine clearance of greater than 130 mL/min/1.73 m2 best measured by 8–24 h urine collection. Patients exhibiting ARC tend to be younger (<50 years old, of male gender, had a recent history of trauma, and had lower critical illness severity scores. Numerous studies have reported antimicrobials treatment failures when using standard dosing regimens in patients with ARC. In conclusion, ARC is an important phenomenon that might have significant impact on outcome in critically ill patients. Identifying patients at risk, using higher doses of renally eliminated drugs or use of non-renally eliminated alternatives might need to be considered in ICU patients with ARC. More research is needed to solidify dosing recommendations of various drugs in patients with ARC.

  1. Calculation of the minimum critical mass of fissile nuclides

    International Nuclear Information System (INIS)

    Wright, R.Q.; Hopper, Calvin Mitchell

    2008-01-01

    The OB-1 method for the calculation of the minimum critical mass of fissile actinides in metal/water systems was described in a previous paper. A fit to the calculated minimum critical mass data using the extended criticality parameter is the basis of the revised method. The solution density (grams/liter) for the minimum critical mass is also obtained by a fit to calculated values. Input to the calculation consists of the Maxwellian averaged fission and absorption cross sections and the thermal values of nubar. The revised method gives more accurate values than the original method does for both the minimum critical mass and the solution densities. The OB-1 method has been extended to calculate the uncertainties in the minimum critical mass for 12 different fissile nuclides. The uncertainties for the fission and capture cross sections and the estimated nubar uncertainties are used to determine the uncertainties in the minimum critical mass, either in percent or grams. Results have been obtained for U-233, U-235, Pu-236, Pu-239, Pu-241, Am-242m, Cm-243, Cm-245, Cf-249, Cf-251, Cf-253, and Es-254. Eight of these 12 nuclides are included in the ANS-8.15 standard.

  2. Critical Mass in the Boardroom of Croatian Banks

    OpenAIRE

    Kramaric Tomislava Pavic; Miletic Marko

    2017-01-01

    This paper investigates the influence of gender diversity in the boardroom of Croatian banks on their performance. Specifically, we deal with both management and supervisory boards. Moreover, based on critical mass theory, the authors try to find out what constitutes critical mass. Using a static panel analysis on a sample of all commercial banks that operated in the period 2002-2014, three models were estimated with return on assets (ROA), return on equity (ROE) and net interest margin (NIM)...

  3. Russian atomic energy reaches critical masses

    International Nuclear Information System (INIS)

    Ustinov, A.

    1996-01-01

    With more than 200 malfunctions recorded in the early 1990's the outmoded nuclear reactors in the former Soviet Union are in critical condition. Unfortunatly, there may not be enough money to monitor them, much less update them, says Artiom Ustinov, an expert in the Russian Ministry of Foreign Affairs in Moscow. In on short decade, Russia's nuclear research budget has been slashed from $1.5 billion to $250 million. That amount of money simply cannot be stretched far enough to address safety issues, Ustinov says. open-quotes Currently, nuclear reactors in the former Soviet Union pose a greater environmental threat than ever before,close quotes ustinov says. open-quotes In fact, almost half the nuclear power plants operating in Russia today are Chernobyl-like.close quotes and most of these facilities are located in such large industrial centers as Moscow and st. Petersburg, Ustinov says. The future of nuclear power in the Soviet Union remains cloudy, Ustinov concludes. open-quotes It is likely that the legacy of its development will continue to generate electricity-and controversy-in the years ahead.close quotes

  4. Modified Augmented Renal Clearance Score Predicts Rapid Piperacillin and Tazobactam Clearance in Critically Ill Surgery and Trauma Patients

    Science.gov (United States)

    2014-04-24

    collision; VAP , ventilator-associated pneumonia. TABLE 2. PK Parameter Estimates for Free Piperacillin and Tazobactam in Patients Stratified by ARC Score...SOFA score are typically generated during routine care of the most severely ill patients . Positive screening test results (high ARC scores) can be...Modified Augmented Renal Clearance score predicts rapid piperacillin and tazobactam clearance in critically ill surgery and trauma patients Kevin S

  5. Critical masses for the even-neutron-numbered transuranium actinides

    International Nuclear Information System (INIS)

    Westfall, R.M.

    1981-01-01

    As part of a standards effort of the American Nuclear Society to establish subcritical mass limits for the transuranium actinides, critical masses were calculated for seven actinides, critical masses were calculated for seven actinide elements in bare, water-reflected, and steel-reflected metal systems. For the nuclides /sup 242/Pu and /sup 241/Am, values obtained with ENDF/B-V cross-section data were in much better agreement with values inferred from experimental measurement than were initial values calculated with ENDF/B-IV data. A brief description of the analytical methods employed is followed by a presentation of the results. 10 refs

  6. Changing the Culture of Academic Medicine: Critical Mass or Critical Actors?

    Science.gov (United States)

    Newbill, Sharon L.; Cardinali, Gina; Morahan, Page S.; Chang, Shine; Magrane, Diane

    2017-01-01

    Abstract Purpose: By 2006, women constituted 34% of academic medical faculty, reaching a critical mass. Theoretically, with critical mass, culture and policy supportive of gender equity should be evident. We explore whether having a critical mass of women transforms institutional culture and organizational change. Methods: Career development program participants were interviewed to elucidate their experiences in academic health centers (AHCs). Focus group discussions were held with institutional leaders to explore their perceptions about contemporary challenges related to gender and leadership. Content analysis of both data sources revealed points of convergence. Findings were interpreted using the theory of critical mass. Results: Two nested domains emerged: the individual domain included the rewards and personal satisfaction of meaningful work, personal agency, tensions between cultural expectations of family and academic roles, and women's efforts to work for gender equity. The institutional domain depicted the sociocultural environment of AHCs that shaped women's experience, both personally and professionally, lack of institutional strategies to engage women in organizational initiatives, and the influence of one leader on women's ascent to leadership. Conclusions: The predominant evidence from this research demonstrates that the institutional barriers and sociocultural environment continue to be formidable obstacles confronting women, stalling the transformational effects expected from achieving a critical mass of women faculty. We conclude that the promise of critical mass as a turning point for women should be abandoned in favor of “critical actor” leaders, both women and men, who individually and collectively have the commitment and power to create gender-equitable cultures in AHCs. PMID:28092473

  7. Changing the Culture of Academic Medicine: Critical Mass or Critical Actors?

    Science.gov (United States)

    Helitzer, Deborah L; Newbill, Sharon L; Cardinali, Gina; Morahan, Page S; Chang, Shine; Magrane, Diane

    2017-05-01

    By 2006, women constituted 34% of academic medical faculty, reaching a critical mass. Theoretically, with critical mass, culture and policy supportive of gender equity should be evident. We explore whether having a critical mass of women transforms institutional culture and organizational change. Career development program participants were interviewed to elucidate their experiences in academic health centers (AHCs). Focus group discussions were held with institutional leaders to explore their perceptions about contemporary challenges related to gender and leadership. Content analysis of both data sources revealed points of convergence. Findings were interpreted using the theory of critical mass. Two nested domains emerged: the individual domain included the rewards and personal satisfaction of meaningful work, personal agency, tensions between cultural expectations of family and academic roles, and women's efforts to work for gender equity. The institutional domain depicted the sociocultural environment of AHCs that shaped women's experience, both personally and professionally, lack of institutional strategies to engage women in organizational initiatives, and the influence of one leader on women's ascent to leadership. The predominant evidence from this research demonstrates that the institutional barriers and sociocultural environment continue to be formidable obstacles confronting women, stalling the transformational effects expected from achieving a critical mass of women faculty. We conclude that the promise of critical mass as a turning point for women should be abandoned in favor of "critical actor" leaders, both women and men, who individually and collectively have the commitment and power to create gender-equitable cultures in AHCs.

  8. Critical mass experiment using U-235 foils and lucite plates

    International Nuclear Information System (INIS)

    Sanchez, R.; Butterfield, K.; Kimpland, R.; Jaegers, P.

    1998-01-01

    The main objective of this experiment was to show how the multiplication of the system increases as moderated material is placed between highly enriched uranium foils. In addition, this experiment served to demonstrate the hand-stacking techniques, and approach to criticality by remote operation. This experiment was designed by Tom McLaughlin in the mid seventies as part of the criticality safety course that is taught at Los Alamos Critical Experiment Facility (LACEF). The W-U-235 ratio for this experiment was 215 which is where the minimum critical mass for this configuration occurs

  9. Critical mass experiment using 235U foils and lucite plates

    International Nuclear Information System (INIS)

    Sanchez, R.; Butterfield, K.; Kimpland, R.; Jaegers, P.

    1998-01-01

    This experiment demonstrated how the neutron multiplication of a system increases as moderated material is placed between highly enriched uranium foils. In addition, this experiment served to demonstrate the hand-stacking technique and approach to criticality be remote operation. This experiment was designed by McLaughlin in the mid-seventies as part of the criticality safety course that is taught at the Los Alamos Critical Experiments Facility. The H/ 235 U ratio for this experiment was 215, which is the ratio at which the minimum critical mass for this configuration occurs

  10. Bibliography of US patents on augmentation of convective heat and mass transfer

    International Nuclear Information System (INIS)

    Webb, R.L.; Junkhan, G.H.; Bergles, A.E.

    1980-09-01

    Granted patents are an important source of information on the potential commercialization of augmented heat transfer technology. This report presents a bibliography of US patents pertinent to that technology. The total number of patents cited is 321. They are presented in three separate lists: by patent number, alphabetically by first inventor, and by augmentation techniques

  11. Actinides critical masses and the Paxton Woodcock rule

    International Nuclear Information System (INIS)

    Anno, Jacques; Duhamel, Isabelle; Lavarenne, Caroline; Duluc, Matthieu

    2003-01-01

    This paper presents recent actinides (reflected or not, moderated or not) critical masses calculations performed by the French standard route (APOLLO2 Sn 8 P3, 20 energy groups cross-section collapsed from 172 energy groups CEA 93 library). Comparisons are also presented against more accurate routes of the French criticality package CRISTAL, showing the fair conservatism of the standard values. Checks of the Paxton Woodcock rule for transportation exemption limit were also made. (author)

  12. Actinides critical masses and the Paxton Woodcock rule

    Energy Technology Data Exchange (ETDEWEB)

    Anno, Jacques; Duhamel, Isabelle; Lavarenne, Caroline [Institut de Radioprotection et de Surete Nucleaire, Fontenay aux Roses (France); Duluc, Matthieu [Institut National des Sciences et Techniques Nucleaires (INSTN) (France)

    2003-10-01

    This paper presents recent actinides (reflected or not, moderated or not) critical masses calculations performed by the French standard route (APOLLO2 Sn 8 P3, 20 energy groups cross-section collapsed from 172 energy groups CEA 93 library). Comparisons are also presented against more accurate routes of the French criticality package CRISTAL, showing the fair conservatism of the standard values. Checks of the Paxton Woodcock rule for transportation exemption limit were also made. (author)

  13. Critical Mass in the Boardroom of Croatian Banks

    Directory of Open Access Journals (Sweden)

    Kramaric Tomislava Pavic

    2017-04-01

    Full Text Available This paper investigates the influence of gender diversity in the boardroom of Croatian banks on their performance. Specifically, we deal with both management and supervisory boards. Moreover, based on critical mass theory, the authors try to find out what constitutes critical mass. Using a static panel analysis on a sample of all commercial banks that operated in the period 2002-2014, three models were estimated with return on assets (ROA, return on equity (ROE and net interest margin (NIM as dependent variables. Board structure variables include gender of the chairperson, size of the board, share of women on the board and four dummy variables constructed on critical mass theory, specifically uniform group, skewed group, tilted group and balanced group. Other controls employed in the model include capital adequacy, the growth rate of assets at the bank level, ownership, age and a crisis dummy. The main finding is that when a critical mass of 20%-40% of women on the management board has been reached, bank performance improves.

  14. Critical mass of public goods and its coevolution with cooperation

    Science.gov (United States)

    Shi, Dong-Mei; Wang, Bing-Hong

    2017-07-01

    In this study, the enhancing parameter represented the value of the public goods to the public in public goods game, and was rescaled to a Fermi-Dirac distribution function of critical mass. Public goods were divided into two categories, consumable and reusable public goods, and their coevolution with cooperative behavior was studied. We observed that for both types of public goods, cooperation was promoted as the enhancing parameter increased when the value of critical mass was not very large. An optimal value of critical mass which led to the best cooperation was identified. We also found that cooperations emerged earlier for reusable public goods, and defections became extinct earlier for the consumable public goods. Moreover, we observed that a moderate depreciation rate for public goods resulted in an optimal cooperation, and this range became wider as the enhancing parameter increased. The noise influence on cooperation was studied, and it was shown that cooperation density varied non-monotonically as noise amplitude increased for reusable public goods, whereas decreased monotonically for consumable public goods. Furthermore, existence of the optimal critical mass was also identified in other three regular networks. Finally, simulation results were utilized to analyze the provision of public goods in detail.

  15. Critical masses of miniexplosion in fission-fusion hybrid systems

    Energy Technology Data Exchange (ETDEWEB)

    Kaliski, S [Polska Akademia Nauk, Warsaw. Inst. Podstawowych Problemow Techniki

    1976-01-01

    The critical mass of the fissionable material subjected to the explosive compression and the action of the neutron stream originating from the process of D-T fusion in the spherical cavity was estimated. High energy recovery from the fissionable material was obtained and the energy of the laser pulse was minimized.

  16. Fission, critical mass and safety-a historical review

    International Nuclear Information System (INIS)

    Meggitt, Geoff

    2006-01-01

    Since the discovery of fission, the notion of a chain reaction in a critical mass releasing massive amounts of energy has haunted physicists. The possibility of a bomb or a reactor prompted much of the early work on determining a critical mass, but the need to avoid an accidental critical excursion during processing or transport of fissile material drove much that took place subsequently. Because of the variety of possible situations that might arise, it took some time to develop adequate theoretical tools for criticality safety and the early assessments were based on direct experiment. Some extension of these experiments to closely similar situations proved possible, but it was not until the 1960s that theoretical methods (and computers to run them) developed enough for them to become reliable assessment tools. Validating such theoretical methods remained a concern, but by the end of the century they formed the backbone of criticality safety assessment. This paper traces the evolution of these methods, principally in the UK and USA, and summarises some related work concerned with the nature of criticality accidents and their radiological consequences. It also indicates how the results have been communicated and used in ensuring nuclear safety. (review)

  17. Effects of various moderators on the critical mass of plutonium

    International Nuclear Information System (INIS)

    Doherty, A.L.

    1986-01-01

    The fissile material storage tanks in the Hanford Plutonium Critical Mass Laboratory (CML) in Richland, Washington, are presently being upgraded. During the design and planning phase of this modification, criticality analysis was necessary to compare potential moderator/absorber materials used as isolators between tanks. A parameter study was performed to assist in determining the appropriate moderator material to be used in the plutonium nitrate storage tank system in the mix room at the CML. Four moderator/absorber materials were identified as providing adequate isolation between the tanks

  18. Predictions of the marviken subcooled critical mass flux using the critical flow scaling parameters

    Energy Technology Data Exchange (ETDEWEB)

    Park, Choon Kyung; Chun, Se Young; Cho, Seok; Yang, Sun Ku; Chung, Moon Ki [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling (C{sub d,ref} and {Delta}{Tau}{sup *} {sub sub}). The agreement between the measured data and the predictions are excellent. 8 refs., 8 figs. 1 tab. (Author)

  19. Predictions of the marviken subcooled critical mass flux using the critical flow scaling parameters

    Energy Technology Data Exchange (ETDEWEB)

    Park, Choon Kyung; Chun, Se Young; Cho, Seok; Yang, Sun Ku; Chung, Moon Ki [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling (C{sub d,ref} and {Delta}{Tau}{sup *} {sub sub}). The agreement between the measured data and the predictions are excellent. 8 refs., 8 figs. 1 tab. (Author)

  20. Ethical issues in pediatric emergency mass critical care.

    Science.gov (United States)

    Antommaria, Armand H Matheny; Powell, Tia; Miller, Jennifer E; Christian, Michael D

    2011-11-01

    As a result of recent events, including natural disasters and pandemics, mass critical care planning has become a priority. In general, planning involves limiting the scope of disasters, increasing the supply of medical resources, and allocating scarce resources. Entities at varying levels have articulated ethical frameworks to inform policy development. In spite of this increased focus, children have received limited attention. Children require special attention because of their unique vulnerabilities and needs. In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations.Steering Committee members established subgroups by topic area and performed literature reviews of MEDLINE and Ovid databases. Draft documents were subsequently developed and revised based on the feedback from the Task Force. The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29-30, 2010. This document reflects expert input from the Task Force in addition to the most current medical literature. The Ethics Subcommittee recommends that surge planning seek to provide resources for children in proportion to their percentage of the population or preferably, if data are available, the percentage of those affected by the disaster. Generally, scarce resources should be allocated on the basis of need, benefit, and the conservation of resources. Estimates of need, benefit, and resource utilization may be more subjective or objective. While the

  1. Critical masses of bare metal spheres using SCALE/XSDRN

    International Nuclear Information System (INIS)

    Wright, R.Q.; Jordan, W.C.; Westfall, R.M.

    2000-01-01

    More than 200 actinide isotopes are known; most of them have very short half-lives (only 45 with T 1/2 > 40 days). Only 41 have been predicted capable of a self-sustaining nuclear chain reaction, some of them with fast neutrons and others with either thermal or fast neutrons. Of these 41 there are 13 nuclides for which the average production is >1 g/tonne for pressurized water reactors or boiling water reactors (35 GWd/tonne--power 35 W/g; cooling time, 90 days). Six actinides, 233 U, 235 U, 238 U, 239 Pu, 240 Pu, and 241 Pu, have cross sections that are relatively well known. Cross sections for the other actinides are not as well known. In the United States, criticality safety guidelines for nuclides other than 233 U, 235 U, and 239 Pu is provided by the American National Standard for Nuclear Criticality Control of Special Actinide Elements, ANSI/ANS-8.15. The standard appeared in 1981 and was reaffirmed in 1987 and 1995. The standard provides guidance for 14 nuclei: 237 Np, 238 Pu, 240 Pu, 241 Pu, 242 Pu, 241 Am, 242m Am, 243 Am, 243 Cm, 244 Cm, 245 Cm, 247 Cm, 249 Cf, and 251 Cf. The ANS-8.15 Standard Work Group is in the process of revising the standard. Five nuclides will be added to the list of nuclides included-- 231 Pa, 234 U, 250 Cf, 252 Cf, and 254 Es--resulting in a total of 19 nuclides in the revised standard. Subcritical mass limits in the current standard are based on calculations by Clark and Westfall. The calculations were based on ENDF/B-IV and preliminary ENDF/B-V evaluations. For several of the actinides, new or revised evaluations are available in ENDF/B-VI. All of the 19 nuclides in the revised standard are included in the current paper with the exception of 231 Pa. In a previous paper, minimum critical mass estimates for metal-water mixtures (spherical geometry), fully reflected by water, for 20 fissile nuclides with values of Z between 92 and 99 were given. A simple exponential fit was developed that gives quite accurate values for the

  2. Augmentation of DAA Staggered – Solution Equations in Underwater Shock Problems for Singular Structural Mass Matrices

    OpenAIRE

    DeRuntz Jr., John A.

    2005-01-01

    The numerical solution of underwater shock fluid – structure interaction problems using boundary element/finite element techniques became tractable through the development of the family of Doubly Asymptotic Approximations (DAA). Practical implementation of the method has relied on the so-called augmentation of the DAA equations. The fluid and structural systems are respectively coupled by the structural acceleration vector in the surface normal direction on the right hand side of the DAA equa...

  3. Plutonium Critical Mass Curve Comparison to Mass at Upper Subcritical Limit (USL) Using Whisper

    International Nuclear Information System (INIS)

    Alwin, Jennifer Louise; Zhang, Ning

    2016-01-01

    Whisper is computational software designed to assist the nuclear criticality safety analyst with validation studies with the MCNP ® Monte Carlo radiation transport package. Standard approaches to validation rely on the selection of benchmarks based upon expert judgment. Whisper uses sensitivity/uncertainty (S/U) methods to select relevant benchmarks to a particular application or set of applications being analyzed. Using these benchmarks, Whisper computes a calculational margin. Whisper attempts to quantify the margin of subcriticality (MOS) from errors in software and uncertainties in nuclear data. The combination of the Whisper-derived calculational margin and MOS comprise the baseline upper subcritical limit (USL), to which an additional margin may be applied by the nuclear criticality safety analyst as appropriate to ensure subcriticality. A series of critical mass curves for plutonium, similar to those found in Figure 31 of LA-10860-MS, have been generated using MCNP6.1.1 and the iterative parameter study software, WORM S olver. The baseline USL for each of the data points of the curves was then computed using Whisper 1.1. The USL was then used to determine the equivalent mass for plutonium metal-water system. ANSI/ANS-8.1 states that it is acceptable to use handbook data, such as the data directly from the LA-10860-MS, as it is already considered validated (Section 4.3 4) ''Use of subcritical limit data provided in ANSI/ANS standards or accepted reference publications does not require further validation.''). This paper attempts to take a novel approach to visualize traditional critical mass curves and allows comparison with the amount of mass for which the k eff is equal to the USL (calculational margin + margin of subcriticality). However, the intent is to plot the critical mass data along with USL, not to suggest that already accepted handbook data should have new and more rigorous requirements for validation.

  4. (Hypo) critical mass: do women make a difference?

    Science.gov (United States)

    Pandian, H

    1997-01-01

    The debate about the gender impact of women journalists on society encompass several issues. First of all, there is the question of whether women have influenced and expanded the definition of "news." Surveys reveal that the topics of interest in newspapers differ for women and men, and that this gap is widening in some areas and closing in others. While some researchers find that women's reporting is more humanized, whereas that of men is more objective, feminists decry this distinction because it assumes that gender is a fixed property of individuals instead of part of a continuing process of identity-seeking. Such a rigid construction of "gender" results in relegating women to the "women's page ghetto." Secondly, there is the question of whether a "critical mass" of women in the newsroom is necessary in order for women to change patterns of gender representation. One opinion states that women will be unable to change anything as long as they remain in subordinate positions; others feel that a critical mass of 25-30% women would make a difference. It seems that long-term change will not occur until educational institutions that train journalists develop a journalistic norm that requires use of all human senses, celebrates diversity, and rejects "pre-thought" ideas. Such institutions could train the women and men who may transform the media and create a new gender code by changing existing value systems.

  5. Augmented real-time navigation with critical structure proximity alerts for endoscopic skull base surgery.

    Science.gov (United States)

    Dixon, Benjamin J; Daly, Michael J; Chan, Harley; Vescan, Allan; Witterick, Ian J; Irish, Jonathan C

    2014-04-01

    Image-guided surgery (IGS) systems are frequently utilized during cranial base surgery to aid in orientation and facilitate targeted surgery. We wished to assess the performance of our recently developed localized intraoperative virtual endoscopy (LIVE)-IGS prototype in a preclinical setting prior to deployment in the operating room. This system combines real-time ablative instrument tracking, critical structure proximity alerts, three-dimensional virtual endoscopic views, and intraoperative cone-beam computed tomographic image updates. Randomized-controlled trial plus qualitative analysis. Skull base procedures were performed on 14 cadaver specimens by seven fellowship-trained skull base surgeons. Each subject performed two endoscopic transclival approaches; one with LIVE-IGS and one using a conventional IGS system in random order. National Aeronautics and Space Administration Task Load Index (NASA-TLX) scores were documented for each dissection, and a semistructured interview was recorded for qualitative assessment. The NASA-TLX scores for mental demand, effort, and frustration were significantly reduced with the LIVE-IGS system in comparison to conventional navigation (P < .05). The system interface was judged to be intuitive and most useful when there was a combination of high spatial demand, reduced or absent surface landmarks, and proximity to critical structures. The development of auditory icons for proximity alerts during the trial better informed the surgeon while limiting distraction. The LIVE-IGS system provided accurate, intuitive, and dynamic feedback to the operating surgeon. Further refinements to proximity alerts and visualization settings will enhance orientation while limiting distraction. The system is currently being deployed in a prospective clinical trial in skull base surgery. © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

  6. Mass production of holographic transparent components for augmented and virtual reality applications

    Science.gov (United States)

    Russo, Juan Manuel; Dimov, Fedor; Padiyar, Joy; Coe-Sullivan, Seth

    2017-06-01

    Diffractive optics such as holographic optical elements (HOEs) can provide transparent and narrow band components with arbitrary incident and diffracted angles for near-to-eye commercial electronic products for augmented reality (AR), virtual reality (VR), and smart glass applications. In this paper, we will summarize the operational parameters and general optical geometries relevant for near-to-eye displays, the holographic substrates available for these applications, and their performance characteristics and ease of manufacture. We will compare the holographic substrates available in terms of fabrication, manufacturability, and end-user performance characteristics. Luminit is currently emplacing the manufacturing capacity to serve this market, and this paper will discuss the capabilities and limitations of this unique facility.

  7. [Variation of muscle mass and weight in critical patient].

    Science.gov (United States)

    Valls-Matarín, J; del Cotillo-Fuente, M; Grané-Mascarell, N; Quintana, S

    2015-01-01

    Quantify the muscle mass and body weight variation in critically ill patients and to identify associated factors. A descriptive follow-up study. Data for demographic variables, body weight, fluid balance, daily kilocalories, the amount of sedation and muscle relaxants received and motor physiotherapy applied were collected. Three consecutive measurements were performed in the brachial biceps and quadriceps rectus by using ultrasound, upon admission and every 5 days until discharge. 68 patients were included. Average age was of 73.5 [57-78,5] years. The median length of stay was 9.5 [5.5 -15] days. The median 16 (SD=5.7) daily kilocalories per kg/weight, 91.2% received sedation, 44.1% received muscle relaxants and 20% received physiotherapy. The patients presented a muscle wasting of 4.9 (SD=3.9)mm, p <.001 in the brachial biceps and 5.6 (SD=4.8)mm, p <.001 in the quadriceps rectus. Regression analysis selected the length of stay and the muscle relaxants are the most influential variables in the brachial biceps muscle wasting (R2=0.4), and length of stay as the most influential in the quadriceps rectus muscle wasting (R2=0.3). Patient's mean body weight on admission was of 81.1 (SD=15)kg and 81.2 (SD=14.2)kg on discharge, p=.95. The critically ill patient presents a significant muscle waste related with the length of stay and the treatment received with muscle relaxants. Patients are being discharged with a similar body weight to which they were admitted but with a significant reduction of muscle mass. Copyright © 2014 Elsevier España, S.L.U. y SEEIUC. All rights reserved.

  8. Morphine-augmented cholescintigraphy and acute a calculous cholecystitis in critically ill patients: interest and new way of interpreting

    International Nuclear Information System (INIS)

    Emptaz, A.; Prevot, N.; Dubois, F.; Mahul, P.; Mariat, G.; Jospe, R.; Auboyer, C.; Cuilleron, M.

    2005-01-01

    Introduction: Acute acalculous cholecystitis (AAC) is a serious disease, difficult to diagnose in critically ill patients. The aim of the study was to evaluate the diagnostic performances of abdominal ultrasonography (US) and morphine-augmented cholescintigraphy (MC) and to improve diagnostic strategy in patients of intensive care unit (ICU) with suspected AA C. Methods: We retrospectively studied 82 consecutive ICU patients with suspected AA C. US was positive if the triad of gallbladder distension, gallbladder wall thickening and sludge was found. MC was positive if the gallbladder remained non-visualized after morphine injection. In a second time, other scintigraphic criteria of interpretation were tested, according to the visualization of the gallbladder before or after morphine administration. Treatment was decided on the basis of clinical, laboratory and imaging data. Results: The diagnosis of AAC was retained in 34 patients. US and MC had respectively for the diagnosis of AAC a sensitivity of 20.6 and 70.6%, and a specificity of 95.8 and 100%. Interpreting the MC as positive if the gallbladder remains non-visualized after morphine, as negative if it appears before, and as non-conclusive if visualized after, makes it possible to define respectively patients with high probability (100%), with low probability (7.5%) or with intermediate probability (39%) of AAC. Conclusions: MC is better than US for diagnosing AAC in critically ill patients, having in particular excellent specificity using the classical criteria of interpretation. MC must be thus performed in patients at risk for AAC, determined with clinical, laboratory and eventually echographic findings. To decrease false negative rate of MC, a probability categorical classification is proposed to improve patients' care. (author)

  9. Minimum critical masses for uranium at the Portsmouth Gaseous Diffusion Plant

    International Nuclear Information System (INIS)

    Tayloe, R.W. Jr.; Davis, T.C.

    1994-06-01

    This report presents a tabulation of safe masses and minimum critical masses for uranium (U). These minimum critical mass and safe mass tables were obtained by interpolating between the values reported in the literature to obtain values as a function of enrichment within the 1.5 percent to 100 percent range. Equivalent mass values for uranium-235 (U 235 ), uranium hexafluoride (UF 6 ), and uranyl fluoride (UO 2 F 2 ) have been generated from the safe mass and minimum critical masses for uranium

  10. The Acceptance of Critical-Cultural Scholarship in Mass Communication Education.

    Science.gov (United States)

    Switzer, Les; Ryan, Michael

    2002-01-01

    Notes that critical-cultural studies have had little impact on journalism and mass communication education for a number of reasons. Surveys 100 journalism and mass communication programs. Examines how critical-cultural faculty interact with the university community. Finds that scholars, as a whole, were open to critical-cultural perspectives.…

  11. Mobile Augmented Reality Applications

    OpenAIRE

    Prochazka, David; Stencl, Michael; Popelka, Ondrej; Stastny, Jiri

    2011-01-01

    Augmented reality have undergone considerable improvement in past years. Many special techniques and hardware devices were developed, but the crucial breakthrough came with the spread of intelligent mobile phones. This enabled mass spread of augmented reality applications. However mobile devices have limited hardware capabilities, which narrows down the methods usable for scene analysis. In this article we propose an augmented reality application which is using cloud computing to enable using...

  12. Steamworlds: Atmospheric Structure and Critical Mass of Planets Accreting Icy Pebbles

    International Nuclear Information System (INIS)

    Chambers, John

    2017-01-01

    In the core accretion model, gas-giant planets first form a solid core, which then accretes gas from a protoplanetary disk when the core exceeds a critical mass. Here, we model the atmosphere of a core that grows by accreting ice-rich pebbles. The ice fraction of pebbles evaporates in warm regions of the atmosphere, saturating it with water vapor. Excess water precipitates to lower altitudes. Beneath an outer radiative region, the atmosphere is convective, following a moist adiabat in saturated regions due to water condensation and precipitation. Atmospheric mass, density, and temperature increase with core mass. For nominal model parameters, planets with core masses (ice + rock) between 0.08 and 0.16 Earth masses have surface temperatures between 273 and 647 K and form an ocean. In more massive planets, water exists as a supercritical convecting fluid mixed with gas from the disk. Typically, the core mass reaches a maximum (the critical mass) as a function of the total mass when the core is 2–5 Earth masses. The critical mass depends in a complicated way on pebble size, mass flux, and dust opacity due to the occasional appearance of multiple core-mass maxima. The core mass for an atmosphere of 50% hydrogen and helium may be a more robust indicator of the onset of gas accretion. This mass is typically 1–3 Earth masses for pebbles that are 50% ice by mass, increasing with opacity and pebble flux and decreasing with pebble ice/rock ratio.

  13. Steamworlds: Atmospheric Structure and Critical Mass of Planets Accreting Icy Pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Chambers, John, E-mail: jchambers@carnegiescience.edu [Carnegie Institution for Science Department of Terrestrial Magnetism, 5241 Broad Branch Road, NW, Washington, DC 20015 (United States)

    2017-11-01

    In the core accretion model, gas-giant planets first form a solid core, which then accretes gas from a protoplanetary disk when the core exceeds a critical mass. Here, we model the atmosphere of a core that grows by accreting ice-rich pebbles. The ice fraction of pebbles evaporates in warm regions of the atmosphere, saturating it with water vapor. Excess water precipitates to lower altitudes. Beneath an outer radiative region, the atmosphere is convective, following a moist adiabat in saturated regions due to water condensation and precipitation. Atmospheric mass, density, and temperature increase with core mass. For nominal model parameters, planets with core masses (ice + rock) between 0.08 and 0.16 Earth masses have surface temperatures between 273 and 647 K and form an ocean. In more massive planets, water exists as a supercritical convecting fluid mixed with gas from the disk. Typically, the core mass reaches a maximum (the critical mass) as a function of the total mass when the core is 2–5 Earth masses. The critical mass depends in a complicated way on pebble size, mass flux, and dust opacity due to the occasional appearance of multiple core-mass maxima. The core mass for an atmosphere of 50% hydrogen and helium may be a more robust indicator of the onset of gas accretion. This mass is typically 1–3 Earth masses for pebbles that are 50% ice by mass, increasing with opacity and pebble flux and decreasing with pebble ice/rock ratio.

  14. Self-Organized Criticality and Mass Extinction in Evolutionary Algorithms

    DEFF Research Database (Denmark)

    Krink, Thiemo; Thomsen, Rene

    2001-01-01

    The gaps in the fossil record gave rise to the hypothesis that evolution proceeded in long periods of stasis, which alternated with occasional, rapid changes that yielded evolutionary progress. One mechanism that could cause these punctuated bursts is the re-colonbation of changing and deserted...... at a critical state between chaos and order, known as self-organized criticality (SOC). Based on this background, we used SOC to control the size of spatial extinction zones in a diffusion model. The SOC selection process was easy to implement and implied only negligible computational costs. Our results show...

  15. Measurements of Critical Heat Flux using Mass Transfer System

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seung Hyun; Chung Bum Jin [Kyunghee University, Yongin (Korea, Republic of)

    2016-05-15

    In a severe accident, the reactor vessel is heated by the decay heat from core melts and the outer surface of reactor vessel is cooled by the natural convection of water pool. When the heat flux increases, boiling will start. Further increase of the heat flux may result in the CHF, which is generated by the bubble combinations. The CHF means that the reactor vessel was separated with coolant and wall temperature is raised rapidly. It may damage the reactor vessel. Also the CHF indicates the maximum cooling capability of the system. Therefore, the CHF has been used as a criterion for the regulatory and licensing. Mechanism of hydrogen vapor bubbles generated and combined can be simulated water bubbles mechanism. And also the both heat and mass transfer mechanism of CHF can be identified in the same methods. Therefore, the CHF phenomena can be simulated enough by mass transfer.

  16. A program-management plan with critical-path definition for Combustion Augmentation with Thermionic Energy Conversion (CATEC)

    Science.gov (United States)

    Morris, J. F.; Merrill, O. S.; Reddy, H. K.

    1981-01-01

    Thermionic energy conversion (TEC) is discussed. In recent TEC-topping analyses, overall plant efficiency (OPE) and cost of electricity (COE) improved slightly with current capabilities and substantially with fully matured technologies. Enhanced credibility derives from proven hot-corrosion protection for TEC by silicon-carbide clads in fossil fuel combustion products. Combustion augmentation with TEC (CATEC) affords minimal cost and plant perturbation, but with smaller OPE and COE improvements than more conventional topping applications. Risk minimization as well as comparative simplicity and convenience, favor CATEC for early market penetration. A program-management plan is proposed. Inputs, characteristics, outputs and capabilities are discussed.

  17. A program-management plan with critical-path definition for Combustion Augmentation with Thermionic Energy Conversion (CATEC)

    Science.gov (United States)

    Morris, J. F.; Merrill, O. S.; Reddy, H. K.

    Thermionic energy conversion (TEC) is discussed. In recent TEC-topping analyses, overall plant efficiency (OPE) and cost of electricity (COE) improved slightly with current capabilities and substantially with fully matured technologies. Enhanced credibility derives from proven hot-corrosion protection for TEC by silicon-carbide clads in fossil fuel combustion products. Combustion augmentation with TEC (CATEC) affords minimal cost and plant perturbation, but with smaller OPE and COE improvements than more conventional topping applications. Risk minimization as well as comparative simplicity and convenience, favor CATEC for early market penetration. A program-management plan is proposed. Inputs, characteristics, outputs and capabilities are discussed.

  18. Kaon mass by critical absorption of kaonic atom x rays

    International Nuclear Information System (INIS)

    Lum, G.K.

    1979-10-01

    The energy of the kaonic 6h → 5g transition has been determined using the calculated μ/rho curve. Because the detectors used could not resolve the noncircular transitions, the predictions from a calculated cascade program were used. According to the cascade results for potassium, the number of noncircular x-rays was about 10% of all the transitions between n = 6 to n = 5. Based on the available information, the mass of the kaon was measured to be 493.576/sub -0.069//sup +0.044/ MeV

  19. Rockwell International's Critical Mass Laboratory Program at the Rocky Flats Plant

    International Nuclear Information System (INIS)

    McCarthy, J.D.

    1984-01-01

    The primary mission of the laboratory is to provide data in support of plant operations. To fulfill this task, the facility has unique capabilities for perfoming general purpose critical mass experiment. The critical mass laboratory performed over 1000 critical measurements, primarily with plutonium metal and uranium metal, oxide and solution; it worked also on the NRC program (high-enriched uranium measurements). Presently the laboratory staff prepares for a series of critical measurements on a poisoned tube tank; the laboratory intends to continue to pursue basic plant support programs in the future

  20. Critical mass, rod values and reactivity coefficients for Rapsodie; Masse critique, valeur des barres et coefficients de reactivite de rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, L; Gourdon, J [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1967-07-01

    Besides a brief general description, the report contains a description and discussion of the aims, the methods used and the results of critical mass, rod worth and static reactivity coefficient measurements on the Rapsodie reactor. (authors) [French] Apres une breve description generale, le rapport decrit et discute le but, les methodes employees et les resultats des mesures de masse critique, de reactivite des barres et des coefficients de reactivite statiques du reacteur RAPSODIE. (auteurs)

  1. U-233 fuelled low critical mass solution reactor experiment PURNIMA II

    International Nuclear Information System (INIS)

    Srinivasan, M.; Chandramoleshwar, K.; Pasupathy, C.S.; Rasheed, K.K.; Subba Rao, K.

    1987-01-01

    A homogeneous U-233 uranyl nitrate solution fuelled BeO reflected, low critical mass reactor has been built at the Bhabha Atomic Research Centre, India. Christened PURNIMA II, the reactor was used for the study of the variation of critical mass as a function of fuel solution concentration to determine the minimum critical mass achievable for this geometry. Other experiments performed include the determination of temperature coefficient of reactivity, study of time behaviour of photoneutrons produced due to interaction between decaying U-233 fission product gammas and the beryllium reflector and reactor noise measurements. Besides being the only operational U-233 fuelled reactor at present, PURNIMA II also has the distinction of having attained the lowest critical mass of 397 g of fissile fuel for any operating reactor at the current time. The paper briefly describes the facility and gives an account of the experiments performed and results achieved. (author)

  2. Critical mass calculations for 241Am, 242mAm and 243Am

    International Nuclear Information System (INIS)

    Dias, Hemanth; Tancock, Nigel; Clayton, Angela

    2003-01-01

    Criticality mass calculations are reported for 241 Am, 242m Am and 243 Am using the MONK and MCNP computer codes with the UKNDL, JEF-2.2, ENDF/B-VI and JENDL-3.2 nuclear data libraries. Results are reported for spheres of americium metal and dioxide in bare, water reflected and steel reflected systems. Comparison of results led to the identification of a serious inconsistency in the 241 Am ENDF/B-VI DICE library used by MONK - this demonstrates the importance of using different codes to verify critical mass calculations. The 241 Am critical mass estimates obtained using UKNDL and ENDF/B-VI show good agreement with experimentally inferred data, whilst both JEF-2.2 and JENDL-3.2 produce higher estimates of critical mass. The computed critical mass estimates for 242m Am obtained using ENDF/B-VI are lower than the results produced using the other nuclear data libraries - the ENDF/B-VI fission cross-section for 242m Am is significantly higher than the other evaluations in the fast region and is not supported by recent experimental data. There is wide variation in the computed 243 Am critical mass estimates suggesting that there is still considerable uncertainty in the 243 Am nuclear data. (author)

  3. Augmented postcard

    OpenAIRE

    Bernik , Aleš

    2012-01-01

    The aim of this thesis is the examination of augmented reality technology, which allows us mixing real and virtual elements. Augmented reality is a relatively new technology which is becoming more widespread, thanks to a fairly reasonable price of smart phones. Here we presents the types of augmented reality, the necessary technology and their advantages and disadvantages, its current use in applications, and software for building augmented reality applications. The thesis is mainly focuse...

  4. Measurement of critical mass for an assembly of bare uranium shells

    International Nuclear Information System (INIS)

    Myers, W.L.; Goulding, C.A.; Hollas, C.L.

    1997-01-01

    As part of the research into nuclear measurement techniques, a series of measurements was performed that have applications to criticality safety and nuclear material handling. The critical mass of a set of bare, enriched-uranium metal hemispherical shells, known as the Rocky Flats shells, was measured for an assembly having an inside radius of 2.347 cm. The critical mass value was extrapolated from a series of subcritical measurements using three different kinds of sources (AmBe, AmF, and 252 Cf) placed at the center of the shells. Two kinds of neutron detection configurations (a 1% efficiency and a 25% efficiency configuration) were used to make the measurements

  5. Fear extinction and memory reconsolidation as critical components in behavioral treatment for posttraumatic stress disorder and potential augmentation of these processes.

    Science.gov (United States)

    Smith, Noelle B; Doran, Jennifer M; Sippel, Lauren M; Harpaz-Rotem, Ilan

    2017-05-10

    Posttraumatic stress disorder (PTSD) is associated with alterations in critical brain regions such as the amygdala, hippocampus, and prefrontal cortex. This brief review has two objectives: (1) to discuss research examining extinction and reconsolidation processes as mechanisms in PTSD psychotherapy, and (2) present possibilities for augmenting extinction and reconsolidation within treatment through alterations to therapeutic interventions and novel approaches. A key component of many effective PTSD therapies is exposure, which involves intentional confrontation and processing of the traumatic memory. Our review suggests that extinction and reconsolidation processes underlie effective exposure-based treatment, but the neurobiological mechanisms of these processes in behavioral treatments for PTSD remains unclear. We argue that enhancing extinction and/or disrupting reconsolidation of a feared memory may improve the efficacy of existing treatments (e.g., increased change for limited/non-responders, faster/greater changes for responders), which can be done through multiple channels. Potential avenues for augmentation of the processes of extinction and reconsolidation in PTSD psychotherapies are reviewed, including behavioral modifications, pharmacotherapy agents, and the use of devices during therapy. We further suggest that investigations towards understanding the extent to which extinction and reconsolidation processes are necessary in effective PTSD psychotherapy is an important future direction for enhancing clinical care among PTSD populations. Published by Elsevier B.V.

  6. A semilinear parabolic–elliptic chemotaxis system with critical mass in any space dimension

    International Nuclear Information System (INIS)

    Montaru, Alexandre

    2013-01-01

    We study radial solutions in a ball of R N of a semilinear, parabolic–elliptic Patlak–Keller–Segel system with a nonlinear sensitivity involving a critical power. For N = 2, the latter reduces to the classical ‘linear’ model, well known for its critical mass 8π. We show that a critical mass phenomenon also occurs for N ⩾ 3, but with a strongly different qualitative behaviour. More precisely, if the total mass of cells is smaller or equal to the critical mass M-bar , then the cell density converges to a regular steady state that is supported strictly inside the ball as time goes to infinity. In the case of the critical mass, this result is nontrivial since there exists a continuum of stationary solutions and is moreover in sharp contrast with the case N = 2 where infinite-time blow-up occurs. If the total mass of cells is larger than M-bar , then all radial solutions blow up in finite time. This actually follows from the existence (unlike for N = 2) of a family of self-similar, blowing-up solutions that are supported strictly inside the ball. (paper)

  7. Understanding augmented reality concepts and applications

    CERN Document Server

    Craig, Alan B

    2013-01-01

    Augmented reality is not a technology. Augmented reality is a medium. Likewise, a book on augmented reality that only addresses the technology that is required to support the medium of augmented reality falls far short of providing the background that is needed to produce, or critically consume augmented reality applications. One reads a book. One watches a movie. One experiences augmented reality. Understanding Augmented Reality addresses the elements that are required to create compelling augmented reality experiences. The technology that supports

  8. An approximate method to estimate the minimum critical mass of fissile nuclides

    International Nuclear Information System (INIS)

    Wright, R.Q.; Jordan, W.C.

    1999-01-01

    When evaluating systems in criticality safety, it is important to approximate the answer before any analysis is performed. There is currently interest in establishing the minimum critical parameters for fissile actinides. The purpose is to describe the OB-1 method for estimating the minimum critical mass for thermal systems based on one-group calculations and 235 U spheres fully reflected by water. The observation is made that for water-moderated, well-thermalized systems, the transport and leakage from the system are dominated by water. Under these conditions two fissile mixtures will have nearly the same critical volume provided the infinite media multiplication factor (k ∞ ) for the two systems is the same. This observation allows for very simple estimates of critical concentration and mass as a function of the hydrogen-to-fissile (H/X) moderation ratio by comparison to the known 235 U system

  9. CRITICAL MASS

    Institute of Scientific and Technical Information of China (English)

    DAVID; DAWSON

    2015-01-01

    The Middle Kingdom’s booming Christian community celebrates Christmas教会里的圣诞节并不是购物与狂欢Worldwide,there are two kinds of Christmas.While both are a time of joy,one is relatively secular;its trappings are Christmas trees,gifts,reindeer,and the jolly,red,fat version of Saint Nick(going by圣诞老人,or Christmas Elderly Person in China).

  10. Neonatal and pediatric regionalized systems in pediatric emergency mass critical care.

    Science.gov (United States)

    Barfield, Wanda D; Krug, Steven E; Kanter, Robert K; Gausche-Hill, Marianne; Brantley, Mary D; Chung, Sarita; Kissoon, Niranjan

    2011-11-01

    Improved health outcomes are associated with neonatal and pediatric critical care in well-organized, cohesive, regionalized systems that are prepared to support and rehabilitate critically ill victims of a mass casualty event. However, present systems lack adequate surge capacity for neonatal and pediatric mass critical care. In this document, we outline the present reality and suggest alternative approaches. In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations.Steering Committee members established subcommittees by topic area and performed literature reviews of MEDLINE and Ovid databases. The Steering Committee produced draft outlines through consensus-based study of the literature and convened October 6-7, 2009, in New York, NY, to review and revise each outline. Eight draft documents were subsequently developed from the revised outlines as well as through searches of MEDLINE updated through March 2010.The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29-30, 2010. Feedback on each manuscript was compiled and the Steering Committee revised each document to reflect expert input in addition to the most current medical literature. States and regions (facilitated by federal partners) should review current emergency operations and devise appropriate plans to address the population-based needs of infants and children in large-scale disasters. Action at the state, regional, and federal levels should address

  11. Calculation of the fissile mass of a graphite moderated critical assembly using 93% enriched uranium

    International Nuclear Information System (INIS)

    Correa, F.; Marzo, M.A.S.; Collussi, I.; Ferreira, A.C.A.

    1976-01-01

    The critical mass of uranium has been calculated for a graphite moderated set fueled with 93% enriched uranium to be mounted on the Instituto de Energia Atomica split table Zero Power Reactor. The core composition was optimized to permit the maximum number of configurations to be studied. Analysis of three core compositions shows that 8 Kg of uranium enriched to 93% - U-235 (by weight) and 100 Kg of thorium would be sufficient for criticality experiments [pt

  12. The measurements of critical mass with uranium fuel elements and thorium rods

    International Nuclear Information System (INIS)

    Yao Zhiquan; Chen Zhicheng; Yao Zewu; Ji Huaxiang; Bao Borong; Zhang Jiahua

    1991-01-01

    The critical experiments with uranium elements and Thorium rods have been performed in zero power reactor at Shanghai Institute of Nuclear Research. The critical masses have been measured in various U/Th ratios. The fuels are 3% 235 U-enriched uranium. The Thorium rods are made from power of ThF 4 . Ratios of calculated values to experimental values are nearly constant at 0.995

  13. Analytical review of minimum critical mass values for selected uranium and plutonium materials

    International Nuclear Information System (INIS)

    Morman, J.A.; Henrikson, D.J.; Garcia, A.S.

    1997-01-01

    Current subcritical limits for a number of uranium and plutonium materials (metals and compounds) as given in the ANSI/ANS standards for criticality safety are based on evaluations performed in the late 1970s and early 1980s. This paper presents the results of an analytical study of the minimum critical mass values for a set of materials using current codes and standard cross section sets. This work is meant to produce a consistent set of minimum critical mass values that can form the basis for adding new materials to the single-parameter tables in ANSI/ANS-8.1. Minimum critical mass results are presented for bare and water reflected full-density spheres and for full density moist (1.5 wt-% water) as calculated with KENO-Va, MCNP4A and ONEDANT. Calculations were also performed for both dry and moist materials at one-half density. Some KENO calculations were repeated using several cross section sets to examine potential bias differences. The results of the calculations were compared to the currently accepted subcritical limits. The calculated minimum critical mass values are reasonably consistent for the three codes, and differences most likely reflect differences in the cross section sets. The results are also consistent with values given in ANSI/ANS-8.1. 3 refs., 2 tabs

  14. The effect of virtual mass on the prediction of critical flow

    International Nuclear Information System (INIS)

    Cheng, L.; Lahey, R.T.; Drew, D.A.

    1983-01-01

    By observing the results in Fig. 4 and Fig. 5 we can see that virtual mass effects are important in predicting critical flow. However, as seen in Fig. 7a, in which all three flows are predicted to be critical (Δ=0), it is difficult to distinguish one set of conditions from the other by just considering the pressure profile. Clearly more detailed data, such as the throat void fraction, is needed for discrimination between these calculations. Moreover, since the calculated critical flows have been found to be sensitive to initial mass flux, and void fraction, careful measurements of those parameters are needed before accurate virtual mass parameters can be determined from these data. It can be concluded that the existing Moby Dick data is inadequate to allow one to deduce accurate values of the virtual mass parameters C/sub VM/ and λ. Nevertheless, more careful experiments of this type are uniquely suited for the determination of these important parameters. It appears that the use of a nine equation model, such as that discussed herein, coupled with more detailed accurate critical flow data is an effective means of determining the parameters in interfacial momentum transfer models, such as virtual mass effects, which are only important during strong spatial accelerations. Indeed, there are few other methods available which can be used for such determinations

  15. Bone formation in mono cortical mandibular critical size defects after augmentation with two synthetic nanostructured and one xenogenous hydroxyapatite bone substitute - in vivo animal study.

    Science.gov (United States)

    Dau, Michael; Kämmerer, Peer W; Henkel, Kai-Olaf; Gerber, Thomas; Frerich, Bernhard; Gundlach, Karsten K H

    2016-05-01

    Healing characteristics as well as level of tissue integration and degradation of two different nanostructured hydroxyapatite bone substitute materials (BSM) in comparison with a deproteinized hydroxyapatite bovine BSM were evaluated in an in vivo animal experiment. In the posterior mandible of 18 minipigs, bilateral mono cortical critical size bone defects were created. Randomized augmentation procedures with NanoBone(®) (NHA1), Ostim(®) (NHA2) or Bio-Oss(®) (DBBM) were conducted (each material n = 12). Samples were analyzed after five (each material n = 6) and 8 months (each material n = 6). Defect healing, formation of soft tissue and bone as well as the amount of remaining respective BSM were quantified both macro- and microscopically. For NHA2, the residual bone defect after 5 weeks was significantly less compared to NHA1 or DBBM. There was no difference in residual BSM between NHA1 and DBBM, but the amount in NHA2 was significantly lower. NHA2 also showed the least amount of soft tissue and the highest amount of new bone after 5 weeks. Eight months after implantation, no significant differences in the amount of residual bone defects, in soft tissue or in bone formation were detected between the groups. Again, NHA2 showed significant less residual material than NHA1 and DBBM. We observed non-significant differences in the biological hard tissue response of NHA1 and DBBM. The water-soluble NHA2 initially induced an increased amount of new bone but was highly compressed which may have a negative effect in less stable augmentations of the jaw. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. AUGMENTED REALITY

    DEFF Research Database (Denmark)

    Skov, Kirsten; Bahn, Anne Louise

    2017-01-01

    Projektets grundlæggende idé er udvikling af visuel, æstetisk læring med Augmented Reality, hvor intentionen er at bidrage med konkrete undersøgelser og udforskning af begrebet Augmented Reality – herunder koblingen mellem det analoge og digitale i forhold til læring, multimodalitet og it...

  17. Gamow's calculation of the neutron star's critical mass revised

    International Nuclear Information System (INIS)

    Ludwig, Hendrik; Ruffini, Remo

    2014-01-01

    It has at times been indicated that Landau introduced neutron stars in his classic paper of 1932. This is clearly impossible because the discovery of the neutron by Chadwick was submitted more than one month after Landau's work. Therefore, and according to his calculations, what Landau really did was to study white dwarfs, and the critical mass he obtained clearly matched the value derived by Stoner and later by Chandrasekhar. The birth of the concept of a neutron star is still today unclear. Clearly, in 1934, the work of Baade and Zwicky pointed to neutron stars as originating from supernovae. Oppenheimer in 1939 is also well known to have introduced general relativity (GR) in the study of neutron stars. The aim of this note is to point out that the crucial idea for treating the neutron star has been advanced in Newtonian theory by Gamow. However, this pioneering work was plagued by mistakes. The critical mass he should have obtained was 6.9 M, not the one he declared, namely, 1.5 M. Probably, he was taken to this result by the work of Landau on white dwarfs. We revise Gamow's calculation of the critical mass regarding calculational and conceptual aspects and discuss whether it is justified to consider it the first neutron-star critical mass. We compare Gamow's approach to other early and modern approaches to the problem.

  18. Using Videos To Teach Mass Media and Society from a Critical Perspective.

    Science.gov (United States)

    King, Donna Lee

    2000-01-01

    Explores using videos to teach mass media and society from a critical sociological perspective. Discusses the content of the course from focusing on analysis of corporate capitalism and media producers to analyzing popular media texts on gender, race, the working class, and sexuality. Addresses the evaluation of the course. (CMK)

  19. IMAGE-PLANE ANALYSIS OF n-POINT-MASS LENS CRITICAL CURVES AND CAUSTICS

    Energy Technology Data Exchange (ETDEWEB)

    Danek, Kamil; Heyrovský, David, E-mail: kamil.danek@utf.mff.cuni.cz, E-mail: heyrovsky@utf.mff.cuni.cz [Institute of Theoretical Physics, Faculty of Mathematics and Physics, Charles University in Prague (Czech Republic)

    2015-06-10

    The interpretation of gravitational microlensing events caused by planetary systems or multiple stars is based on the n-point-mass lens model. The first planets detected by microlensing were well described by the two-point-mass model of a star with one planet. By the end of 2014, four events involving three-point-mass lenses had been announced. Two of the lenses were stars with two planetary companions each; two were binary stars with a planet orbiting one component. While the two-point-mass model is well understood, the same cannot be said for lenses with three or more components. Even the range of possible critical-curve topologies and caustic geometries of the three-point-mass lens remains unknown. In this paper we provide new tools for mapping the critical-curve topology and caustic cusp number in the parameter space of n-point-mass lenses. We perform our analysis in the image plane of the lens. We show that all contours of the Jacobian are critical curves of re-scaled versions of the lens configuration. Utilizing this property further, we introduce the cusp curve to identify cusp-image positions on all contours simultaneously. In order to track cusp-number changes in caustic metamorphoses, we define the morph curve, which pinpoints the positions of metamorphosis-point images along the cusp curve. We demonstrate the usage of both curves on simple two- and three-point-mass lens examples. For the three simplest caustic metamorphoses we illustrate the local structure of the image and source planes.

  20. Critical and subcritical mass calculations of fissionable nuclides based on JENDL-3.2+

    International Nuclear Information System (INIS)

    Okuno, H.

    2002-01-01

    We calculated critical and subcritical masses of 10 fissionable actinides ( 233 U, 235 U, 238 Pu, 239 Pu, 241 Pu, 242m Am, 243 Cm, 244 Cm, 249 Cf and 251 Cf) in metal and in metal-water mixtures (except 238 Pu and 244 Cm). The calculation was made with a combination of a continuous energy Monte Carlo neutron transport code, MCNP-4B2, and the latest released version of the Japanese Evaluated Nuclear Data Library, JENDL-3.2. Other evaluated nuclear data files, ENDF/B-VI, JEF-2.2, and JENDL-3.3 in its preliminary version were also applied to find differences in results originated from different nuclear data files. For the so-called big three fissiles ( 233 U, 235 U and 239 Pu), analyzing the criticality experiments cited in ICSBEP Handbook validated the code-library combination, and calculation errors were consequently evaluated. Estimated critical and lower limit critical masses of the big three in a sphere with/without a water or SS-304 reflector were supplied, and they were compared with the subcritical mass limits of ANS-8.1. (author)

  1. Minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, W.C.; Turner, J.C.

    1992-12-01

    A parametric calculational analysis has been performed in order to estimate the minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems. The analysis was performed using a version of the SCALE-4.0 code system and the 27-group ENDF/B-IV cross-section library. Water-moderated uranyl fluoride (UO{sub 2}F{sub 2} and H{sub 2}O) and hydrofluoric-acid-moderated uranium hexaflouride (UF{sub 6} and HF) systems were considered in the analysis over enrichments of 1.4 to 5 wt % {sup 235}U. Estimates of the minimum critical volume, minimum critical mass of uranium, and the minimum mass of moderator required for criticality are presented. There was significant disagreement between the values generated in this study when compared with a similar undocumented study performed in 1983 using ANISN and the Knight-modified Hansen-Roach cross sections. An investigation into the cause of the disagreement was made, and the results are presented.

  2. Minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, W.C.; Turner, J.C.

    1992-12-01

    A parametric calculational analysis has been performed in order to estimate the minimum mass of moderator required for criticality of homogeneous low-enriched uranium systems. The analysis was performed using a version of the SCALE-4.0 code system and the 27-group ENDF/B-IV cross-section library. Water-moderated uranyl fluoride (UO[sub 2]F[sub 2] and H[sub 2]O) and hydrofluoric-acid-moderated uranium hexaflouride (UF[sub 6] and HF) systems were considered in the analysis over enrichments of 1.4 to 5 wt % [sup 235]U. Estimates of the minimum critical volume, minimum critical mass of uranium, and the minimum mass of moderator required for criticality are presented. There was significant disagreement between the values generated in this study when compared with a similar undocumented study performed in 1983 using ANISN and the Knight-modified Hansen-Roach cross sections. An investigation into the cause of the disagreement was made, and the results are presented.

  3. Breast Augmentation

    African Journals Online (AJOL)

    1974-04-13

    Apr 13, 1974 ... Complications encountered after breast augmentation are dealt with in .... in Phisohex or other suitable preparation for a few days before surgery ... In all cases, the prosthesis causes a fibrous tissue capsule to form around it.

  4. Chin augmentation

    Science.gov (United States)

    ... or bigger compared to the nose. The best candidates for chin augmentation are people with weak or ... www.urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. ...

  5. Post-critical behavior of Beck`s column with a tip mass

    DEFF Research Database (Denmark)

    Andersen, S. B.; Thomsen, Jon Juel

    2002-01-01

    This study examines how a tip mass with rotary inertia affects the stability of a follower-loaded cantilevered column. Using nonlinear modeling and perturbation analysis, expressions are set up for determining the stability of the straight column and the amplitude of post-critical flutter...... oscillations. Bifurcation diagrams are given, showing how the vibration amplitude changes with follower load and other parameters. These results agree closely with numerical simulation. It is found that sufficiently large values of tip mass rotary inertia can change the primary bifurcation from supercritical...

  6. Critical mass theory and women directors’ contribution to board strategic tasks

    Directory of Open Access Journals (Sweden)

    Mariateresa Torchia

    2010-11-01

    Full Text Available In this article we offer an empirical test of the critical mass arguments in the discussion of women on corporate boards. The literature in the women on corporate board debate concludes that there must be at least three women on a board before the women really make a difference. These arguments are frequently used in the public debate about the understanding the impact of women on corporate boards, but they have never really been empirically tested on a large sample. In this paper we use a sample of 317 Norwegian firms. Our dependent variable is board strategic involvement. The findings support the critical mass arguments. This study offers useful insights to policy-makers interested in defining legislative measures mandating the presence of women directors in corporate boards by showing that “at least three women” may be particularly beneficial in terms of contribution to board strategic tasks.

  7. Towards a Discourse for Criticism in Language Teaching: Analysis of Sociocultural Representations in Mass Media

    Directory of Open Access Journals (Sweden)

    Margarita Rosa Vargas Torres

    2010-10-01

    Full Text Available This article states that in order to exercise citizenship with responsibility, language teachers need to popularize a discourse for criticism in which students and teachers transcend tacit knowledge and common sense due to meta-cognition and argumentation and reach systematic knowledge and procedures posed by experts in the different disciplines. As illustrated inside, the source and objective of analysis by means of which this discourse can be contextualized in language teaching is the language of mass media and all the sociocultural and signifying practices that it invokes. We conclude that through the analysis of mass media it is possible to educate students with the basic knowledge and skills necessary to interact critically in the world.

  8. Borders amidst power, State and mass media, from a critical theory standpoint

    Directory of Open Access Journals (Sweden)

    Manuel Ortiz Marín

    2006-07-01

    Full Text Available A conception of the power, from the glance of the Critical Theory that it allows to understand the woven complex that links the relations of power to most of the human activities. This paper also approaches to the State as a regulating element of the different forces from institutional character, that they operate in its interior like structures of power and the function as that the massive mass media in the complexity of the modern societies act.

  9. Augmented reality

    Directory of Open Access Journals (Sweden)

    Patrik Pucer

    2011-08-01

    Full Text Available Today we can obtain in a simple and rapid way most of the information that we need. Devices, such as personal computers and mobile phones, enable access to information in different formats (written, pictorial, audio or video whenever and wherever. Daily we use and encounter information that can be seen as virtual objects or objects that are part of the virtual world of computers. Everyone, at least once, wanted to bring these virtual objects from the virtual world of computers into real environments and thus mix virtual and real worlds. In such a mixed reality, real and virtual objects coexist in the same environment. The reality, where users watch and use the real environment upgraded with virtual objects is called augmented reality. In this article we describe the main properties of augmented reality. In addition to the basic properties that define a reality as augmented reality, we present the various building elements (possible hardware and software that provide an insight into such a reality and practical applications of augmented reality. The applications are divided into three groups depending on the information and functions that augmented reality offers, such as help, guide and simulator.

  10. Mass rearing and augmentative biological control evaluation of Rhynocoris fuscipes (Hemiptera: Reduviidae) against multiple pests of cotton.

    Science.gov (United States)

    Tomson, Majesh; Sahayaraj, Kitherian; Kumar, Vivek; Avery, Pasco B; McKenzie, Cindy L; Osborne, Lance S

    2017-08-01

    Rhynocoris fuscipes (Fab.) (Hemiptera: Reduviidae) is a generalist predator of cotton pests and is commonly found inhabiting cotton-growing regions in southern India. With the goal of integrating this predator in standard management practices used against cotton pests on a commercial scale, (1) we developed a protocol for adult group rearing of this predator inside micro-environmental cages (MECs), and (2) we evaluated the biocontrol potential of mass-produced predators against cotton pests under potted and field conditions. Higher fecundity and adult longevity of R. fuscipes was recorded in the MECs than under natural growing conditions. The reduviid predator preferred stones and fallen leaves as hiding places in the MECs. The predator showed a higher biocontrol potential during the night hours against two pests, Phenacoccus solenopsis Tinsley and Dysdercus cingulatus (Fab.), than during the day under potted conditions. Under field conditions, R. fuscipes significantly reduced the population of Aphis gossypii Glover, P. solenopsis, D. cingulatus and Helicoverpa armigera (Hübner) by 28, 70, 29 and 50%, respectively. No negative impact of R. fuscipes was reported on other natural enemies present in the cotton agroecosystem. Significantly higher crop yield and cost benefit ratio were observed in R. fuscipes-released plots than in the control plots. The results suggest that R. fuscipes can be mass produced efficiently under controlled conditions in MECs, and used in an integrated management program for multiple cotton pests. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  11. Augmented Reality

    DEFF Research Database (Denmark)

    Kjærgaard, Hanne Wacher; Kjeldsen, Lars Peter Bech; Rahn, Annette

    2015-01-01

    This chapter describes the use of iPad-facilitated application of augmented reality in the teaching of highly complex anatomical and physiological subjects in the training of nurses at undergraduate level. The general aim of the project is to investigate the potentials of this application in terms...... of making the complex content and context of these subjects more approachable to the students through the visualization made possible through the use of this technology. A case study is described in this chapter. Issues and factors required for the sustainable use of the mobile-facilitated application...... of augmented reality are discussed....

  12. Augmented Reality

    DEFF Research Database (Denmark)

    Nielsen, Birgitte Lund; Brandt, Harald; Radmer, Ole

    2017-01-01

    Artiklen præsenterer resultater fra pilotafprøvning i 7.-klasses fysik/kemi og biologi af to Augmented Reality (AR)-apps til naturfagsundervisning. Muligheder og udfordringer ved lærerens stilladsering af elevernes undersøgende samtale og modelleringskompetence er undersøgt med interview...

  13. Database-augmented Mass Spectrometry Analysis of Exosomes Identifies Claudin 3 as a Putative Prostate Cancer Biomarker.

    Science.gov (United States)

    Worst, Thomas Stefan; von Hardenberg, Jost; Gross, Julia Christina; Erben, Philipp; Schnölzer, Martina; Hausser, Ingrid; Bugert, Peter; Michel, Maurice Stephan; Boutros, Michael

    2017-06-01

    In prostate cancer and other malignancies sensitive and robust biomarkers are lacking or have relevant limitations. Prostate specific antigen (PSA), the only biomarker widely used in prostate cancer, is suffering from low specificity. Exosomes offer new perspectives in the discovery of blood-based biomarkers. Here we present a proof-of principle study for a proteomics-based identification pipeline, implementing existing data sources, to exemplarily identify exosome-based biomarker candidates in prostate cancer.Exosomes from malignant PC3 and benign PNT1A cells and from FBS-containing medium were isolated using sequential ultracentrifugation. Exosome and control samples were analyzed on an LTQ-Orbitrap XL mass spectrometer. Proteomic data is available via ProteomeXchange with identifier PXD003651. We developed a scoring scheme to rank 64 proteins exclusively found in PC3 exosomes, integrating data from four public databases and published mass spectrometry data sets. Among the top candidates, we focused on the tight junction protein claudin 3. Retests under serum-free conditions using immunoblotting and immunogold labeling confirmed the presence of claudin 3 on PC3 exosomes. Claudin 3 levels were determined in the blood plasma of patients with localized ( n = 58; 42 with Gleason score 6-7, 16 with Gleason score ≥8) and metastatic prostate cancer ( n = 11) compared with patients with benign prostatic hyperplasia ( n = 15) and healthy individuals ( n = 15) using ELISA, without prior laborious exosome isolation. ANOVA showed different CLDN3 plasma levels in these groups ( p = 0.004). CLDN3 levels were higher in patients with Gleason ≥8 tumors compared with patients with benign prostatic hyperplasia ( p = 0.012) and Gleason 6-7 tumors ( p = 0.029). In patients with localized tumors CLDN3 levels predicted a Gleason score ≥ 8 (AUC = 0.705; p = 0.016) and did not correlate with serum PSA.By using the described workflow claudin 3 was identified and validated as a

  14. Study on hydrodynamics and mass transfer of the critically safe multistage mixer-settler

    International Nuclear Information System (INIS)

    Zhang Weibo; Jiao Rongzhou; Liu Bingren

    1992-08-01

    The study on structure of critically safe multistage mixer-settler for the extraction process of high enriched uranium and plutonium has been completed. The mixer-settler has simple structure, good critical safety, flexibility in operation (O/A from 0.5 to 5) and high extraction efficiency (E x > 90%). These performances have been proved in the hydrodynamics and mass transfer experiments at a three stages cascade mixer-settler. Based on the others experience, a trapezoidal impeller combined with half-open turbine is developed which has stronger pumping and well mixing function at low rotating speed. The optimal rotating speed is 250 to 280 r/min obtained by experiments

  15. Critical masses of bare homogeneous spherical UO2-water mixtures at intermediate enrichments

    International Nuclear Information System (INIS)

    Rendon, G.L.; Stratton, W.

    1999-01-01

    Critical masses of bare homogeneous spherical UO 2 -water mixtures at various intermediate fissile enrichments determined by multigroup, transport theory is presented. This work was performed to provide support for particular issues encountered by the nuclear industry when operating in the intermediate enrichment regime, namely, the validation of codes used to set criticality safety limits. Validation is normally performed with a comparison of computational results and applicable experiments. However, this may be difficult in some cases because of the lack of sufficient applicable experiments in the intermediate enrichment range. If a large extension of the area of applicability from an experiment to the desired application exists, then an alternative means for validation must be employed. Ideal interpretations of standard ANSI/ANS 8.1 Section 4.3 (1983) implies that perhaps an independent code and data system may be employed for validation purposes

  16. Safety analysis report for the Hanford Critical Mass Laboratory: Supplement No. 2. Experiments with heterogeneous assemblies

    International Nuclear Information System (INIS)

    Gore, B.F.; Davenport, L.C.

    1981-04-01

    Factors affecting the safety of criticality experiments using heterogeneous assemblies are described and assessed. It is concluded that there is no substantial change in safety from experiments already being routinely performed at the Critical Mass Laboratory (CML), and that laboratory and personnel safety are adequately provided by the combination of engineered and administrative safety limits enforced at the CML. This conclusion is based on the analysis of operational controls, potential hazards, and the consequences of accidents. Contingencies considered that could affect nuclear criticality include manual changes in fuel loadings, water flooding, fire, explosion, loss of services, earthquake, windstorm, and flood. Other potential hazards considered include radiation exposure to personnel, and potential releases within the Assembly Room and outside to the environment. It is concluded that the Maximum Credible Nuclear Burst of 3 x 10 18 fissions (which served as the design basis for the CML) is valid for heterogeneous assemblies as well as homogeneous assemblies. This is based upon examination of the results of reactor destructive tests and the results of the SL-1 reactor destructive accident. The production of blast effects which might jeopardize the CML critical assembly room (of thick reinforced concrete) is not considered credible due to the extreme circumstances required to produce blast effects in reactor destructive tests. Consequently, it is concluded that, for experiments with heterogeneous assemblies, the consequences of the Maximum Credible Burst are unchanged from those previously estimated for experiments with homogeneous systems

  17. Critical heat flux correlation analysis for PWR reactors with low mass flow

    International Nuclear Information System (INIS)

    Carajilescov, Pedro

    1996-01-01

    The major limit in the thermalhydraulic design of water cooled reactors consists in the occurrence of critical heat flux, which is verified by correlation of large range of validity. In the present work, the major design correlations were analyzed, through comparisons with experimental data, for utilization in PWR with low mass flux in the core. The results show that the EPRI correlation, with modifications, gives conservative results, from the safety point of view, with lower data spreading, being the most indicated for the reactor thermal design. (author)

  18. Critical Mass has become a tradition for the Bike2Work campaign at CERN

    CERN Multimedia

    2018-01-01

    Critical Mass is a cycling event typically held on the last Friday of every month; its purpose is not usually formalized beyond the direct action of meeting at a set location and time and traveling as a group through city or town streets on bikes. The event originated in 1992 in San Francisco; by the end of 2003, the event was being held in over 300 cities around the world. At CERN it is held once a year in conjunction with the national Swiss campaing "Bike to work".

  19. Critical Participatory Looping: An Agencing Process for Mass Customization in Language Education

    Directory of Open Access Journals (Sweden)

    Tim Murphey

    2012-01-01

    Full Text Available Critical Participatory Looping (CPL (cf. Falout and Murphey 2010; Murphey and Falout 2010 involves returning processed data from surveys or assignments back to students for further reflection and analysis in small groups. CPL affords dialogical interaction among class members (including the teacher, which can encourage them all as agents developing their own self-determination through action—otherwise known as agencing (cf. Murphey 2010, Nelson and Murphey, 2011. In this paper we first describe the kinds of customization that invite agency, then for CPL provide three examples of teaching and researching with it, theorize on its processes and potential, and discuss its correlates with other domains and mass customization.

  20. Augmentation of failed human vertebrae with critical un-contained lytic defect restores their structural competence under functional loading: An experimental study.

    Science.gov (United States)

    Alkalay, Ron N; von Stechow, Dietrich; Hackney, David B

    2015-07-01

    Lytic spinal lesions reduce vertebral strength and may result in their fracture. Vertebral augmentation is employed clinically to provide mechanical stability and pain relief for vertebrae with lytic lesions. However, little is known about its efficacy in strengthening fractured vertebrae containing lytic metastasis. Eighteen unembalmed human lumbar vertebrae, having simulated uncontained lytic defects and tested to failure in a prior study, were augmented using a transpedicular approach and re-tested to failure using a wedge fracture model. Axial and moment based strength and stiffness parameters were used to quantify the effect of augmentation on the structural response of the failed vertebrae. Effects of cement volume, bone mineral density and vertebral geometry on the change in structural response were investigated. Augmentation increased the failed lytic vertebral strength [compression: 85% (Paugmentation is effective in bolstering the failed lytic vertebrae compressive and axial structural competence, showing strength estimates up to 50-90% of historical values of osteoporotic vertebrae without lytic defects. This modest increase suggests that lytic vertebrae undergo a high degree of structural damage at failure, with strength only partially restored by vertebral augmentation. The positive effect of cement volume is self-limiting due to extravasation. Copyright © 2015. Published by Elsevier Ltd.

  1. Augmented reality

    OpenAIRE

    Jecha, Jakub

    2011-01-01

    This thesis is focused on a technology called Augmented reality, especially on its use in marketing. The main objective of the thesis is to define why this technology is a suitable tool for marketing and to assess its use in real conditions. This is achieved by defining specific devices and use cases of this technology in practice, whereas evaluation of its use in real enviroment is based on statistics. The contribution of the thesis is objective evaluation of this technology and provision of...

  2. Renal mass anatomic characteristics and perioperative outcomes of laparoscopic partial nephrectomy: a critical analysis.

    Science.gov (United States)

    Tsivian, Matvey; Ulusoy, Said; Abern, Michael; Wandel, Ayelet; Sidi, A Ami; Tsivian, Alexander

    2012-10-01

    Anatomic parameters determining renal mass complexity have been used in a number of proposed scoring systems despite lack of a critical analysis of their independent contributions. We sought to assess the independent contribution of anatomic parameters on perioperative outcomes of laparoscopic partial nephrectomy (LPN). Preoperative imaging studies were reviewed for 147 consecutive patients undergoing LPN for a single renal mass. Renal mass anatomy was recorded: Size, growth pattern (endo-/meso-/exophytic), centrality (central/hilar/peripheral), anterior/posterior, lateral/medial, polar location. Multivariable models were used to determine associations of anatomic parameters with warm ischemia time (WIT), operative time (OT), estimated blood loss (EBL), intra- and postoperative complications, as well as renal function. All models were adjusted for the learning curve and relevant confounders. Median (range) tumor size was 3.3 cm (1.5-11 cm); 52% were central and 14% hilar. While 44% were exophytic, 23% and 33% were mesophytic and endophytic, respectively. Anatomic parameters did not uniformly predict perioperative outcomes. WIT was associated with tumor size (P=0.068), centrality (central, P=0.016; hilar, P=0.073), and endophytic growth pattern (P=0.017). OT was only associated with tumor size (Panatomic parameter predicted EBL. Tumor centrality increased the odds of overall and intraoperative complications, without reaching statistical significance. Postoperative renal function was not associated with any of the anatomic parameters considered after adjustment for baseline function and WIT. Learning curve, considered as a confounder, was independently associated with reduced WIT and OT as well as reduced odds of intraoperative complications. This study provides a detailed analysis of the independent impact of renal mass anatomic parameters on perioperative outcomes. Our findings suggest diverse independent contributions of the anatomic parameters to the

  3. Jointly Optimize Data Augmentation and Network Training: Adversarial Data Augmentation in Human Pose Estimation

    OpenAIRE

    Peng, Xi; Tang, Zhiqiang; Yang, Fei; Feris, Rogerio; Metaxas, Dimitris

    2018-01-01

    Random data augmentation is a critical technique to avoid overfitting in training deep neural network models. However, data augmentation and network training are usually treated as two isolated processes, limiting the effectiveness of network training. Why not jointly optimize the two? We propose adversarial data augmentation to address this limitation. The main idea is to design an augmentation network (generator) that competes against a target network (discriminator) by generating `hard' au...

  4. Mobile Collaborative Augmented Reality: The Augmented Stroll

    OpenAIRE

    Renevier , Philippe; Nigay , Laurence

    2001-01-01

    International audience; The paper focuses on Augmented Reality systems in which interaction with the real world is augmented by the computer, the task being performed in the real world. We first define what mobile AR systems, collaborative AR systems and finally mobile and collaborative AR systems are. We then present the augmented stroll and its software design as one example of a mobile and collaborative AR system. The augmented stroll is applied to Archaeology in the MAGIC (Mobile Augmente...

  5. Body mass index during adolescence, rather than childhood, is critical in determining MS risk.

    Science.gov (United States)

    Hedström, A K; Olsson, T; Alfredsson, L

    2016-06-01

    Obesity in childhood and during adolescence has repeatedly been associated with increased risk of developing multiple sclerosis (MS). We aimed to investigate whether the most critical period occurs during childhood or later, during adolescence. Using a population-based case-control study (1586 cases and 2800 controls), individuals with different body sizes at age 10 and different body mass indices at age 20 were compared regarding MS risk, by calculating odds ratios with 95% confidence intervals. Potential interactions between HLA-DRB1*15 and absence of HLA-A*02, respectively, and both childhood and adolescent obesity were evaluated by calculating the attributable proportion due to interaction. Regardless of body size at age 10, individuals with adolescent obesity had a 90% increased risk of MS. Among participants who were not obese at age 20, no association was observed between body size at age 10 and subsequent MS risk. An interaction was observed between the HLA MS risk genes and adolescent, but not childhood, obesity. Our results suggest that BMI during adolescence, rather than childhood, is critical in determining MS risk. © The Author(s), 2015.

  6. Limit behavior of mass critical Hartree minimization problems with steep potential wells

    Science.gov (United States)

    Guo, Yujin; Luo, Yong; Wang, Zhi-Qiang

    2018-06-01

    We consider minimizers of the following mass critical Hartree minimization problem: eλ(N ) ≔inf {u ∈H1(Rd ) , ‖u‖2 2=N } Eλ(u ) , where d ≥ 3, λ > 0, and the Hartree energy functional Eλ(u) is defined by Eλ(u ) ≔∫Rd|∇u (x ) |2d x +λ ∫Rdg (x ) u2(x ) d x -1/2 ∫Rd∫Rdu/2(x ) u2(y ) |x -y |2 d x d y . Here the steep potential g(x) satisfies 0 =g (0 ) =infRdg (x ) ≤g (x ) ≤1 and 1 -g (x ) ∈Ld/2(Rd ) . We prove that there exists a constant N* > 0, independent of λg(x), such that if N ≥ N*, then eλ(N) does not admit minimizers for any λ > 0; if 0 N N*, then there exists a constant λ*(N) > 0 such that eλ(N) admits minimizers for any λ > λ*(N) and eλ(N) does not admit minimizers for 0 N). For any given 0 N N*, the limit behavior of positive minimizers for eλ(N) is also studied as λ → ∞, where the mass concentrates at the bottom of g(x).

  7. Interest Convergence or Divergence? A Critical Race Analysis of Asian Americans, Meritocracy, and Critical Mass in the Affirmative Action Debate

    Science.gov (United States)

    Park, Julie J.; Liu, Amy

    2014-01-01

    We use the Critical Race Theory frameworks of interest convergence and divergence to critique the anti-affirmative action movement's co-option of Asian Americans. Past discussions of affirmative action and Asian Americans mainly concentrate on how Asian Americans are affected by affirmative action, whether positively or negatively. We demonstrate…

  8. Nine weeks of supplementation with a multi-nutrient product augments gains in lean mass, strength, and muscular performance in resistance trained men

    Directory of Open Access Journals (Sweden)

    Lemieux Robert

    2010-12-01

    Full Text Available Abstract Background The purpose of this study was to compare the effects of supplementation with Gaspari Nutrition's SOmaxP Maximum Performance™ (SOmaxP versus a comparator product (CP containing an equal amount of creatine (4 g, carbohydrate (39 g maltodextrin, and protein (7 g whey protein hydrolysate on muscular strength, muscular endurance, and body composition during nine weeks of intense resistance training. Methods Using a prospective, randomized, double-blind design, 20 healthy men (mean ± SD age, height, weight, % body fat: 22.9 ± 2.6 y, 178.4 ± 5.7 cm, 80.5 ± 6.6 kg, 16.6 ± 4.0% were matched for age, body weight, resistance training history, bench press strength, bench press endurance, and percent body fat and then randomly assigned via the ABBA procedure to ingest 1/2 scoop (dissolved in 15 oz water of SOmaxP or CP prior to, and another 1/2 scoop (dissolved in 15 oz water during resistance exercise. Body composition (DEXA, muscular performance (1-RM bench press and repetitions to failure [RTF: 3 sets × baseline body weight, 60-sec rest between sets], and clinical blood chemistries were measured at baseline and after nine weeks of supplementation and training. Subjects were required to maintain their normal dietary habits and follow a specific, progressive overload resistance training program (4-days/wk, upper body/lower body split during the study. An intent-to-treat approach was used and data were analyzed via ANCOVA using baseline values as the covariate. Statistical significance was set a priori at p ≤ 0.05. Results When adjusted for initial differences, significant between group post-test means were noted in: 1-RM bench press (SOmaxP: 133.3 ± 1.3 kg [19.8% increase] vs. CP: 128.5 ± 1.3 kg [15.3% increase]; p Conclusions These data indicate that compared to CP, SOmaxP administration augments and increases gains in lean mass, bench press strength, and muscular performance during nine weeks of intense resistance training

  9. An application of the 'end-point' method to the minimum critical mass problem in two group transport theory

    International Nuclear Information System (INIS)

    Williams, M.M.R.

    2003-01-01

    A two group integral equation derived using transport theory, which describes the fuel distribution necessary for a flat thermal flux and minimum critical mass, is solved by the classical end-point method. This method has a number of advantages and in particular highlights the changing behaviour of the fissile mass distribution function in the neighbourhood of the core-reflector interface. We also show how the reflector thermal flux behaves and explain the origin of the maximum which arises when the critical size is less than that corresponding to minimum critical mass. A comparison is made with diffusion theory and the necessary and somewhat artificial presence of surface delta functions in the fuel distribution is shown to be analogous to the edge transients that arise naturally in transport theory

  10. ARLearn: augmented reality meets augmented virtuality

    NARCIS (Netherlands)

    Ternier, Stefaan; Klemke, Roland; Kalz, Marco; Van Ulzen, Patricia; Specht, Marcus

    2012-01-01

    Ternier, S., Klemke, R., Kalz, M., Van Ulzen, P., & Specht, M. (2012). ARLearn: augmented reality meets augmented virtuality [Special issue]. Journal of Universal Computer Science - Technology for learning across physical and virtual spaces, 18(15), 2143-2164.

  11. The Effects of Moon’s Uneven Mass Distribution on the Critical Inclinations of a Lunar Orbiter

    Directory of Open Access Journals (Sweden)

    Walid A. Rahoma

    2014-12-01

    Full Text Available The uneven mass distribution of the Moon highly perturbs the lunar spacecrafts. This uneven mass distribution leads to peculiar dynamical features of the lunar orbiters. The critical inclination is the value of inclination which keeps the deviation of the argument of pericentre from the initial values to be zero. Considerable investigations have been performed for critical inclination when the gravity field is assumed to be symmetric around the equator, namely for oblate gravity field to which Earth’s satellites are most likely to be subjected. But in the case of a lunar orbiter, the gravity field of mass distribution is rather asymmetric, that is, sectorial, and tesseral, harmonic coefficients are big enough so they can’t be neglected. In the present work, the effects of the first sectorial and tesseral harmonic coefficients in addition to the first zonal harmonic coefficients on the critical inclination of a lunar artificial satellite are investigated. The study is carried out using the Hamiltonian framework. The Hamiltonian of the problem is cconstructed and the short periodic terms are eliminated using Delaunay canonical variables. Considering the above perturbations, numerical simulations for a hypothetical lunar orbiter are presented. Finally, this study reveals that the critical inclination is quite different from the critical inclination of traditional sense and/or even has multiple solutions. Consequently, different families of critical inclination are obtained and analyzed.

  12. Characterization of neutron leakage probability, k /SUB eff/ , and critical core surface mass density of small reactor assemblies through the Trombay criticality formula

    International Nuclear Information System (INIS)

    Kumar, A.; Rao, K.S.; Srinivasan, M.

    1983-01-01

    The Trombay criticality formula (TCF) has been derived by incorporating a number of well-known concepts of criticality physics to enable prediction of changes in critical size or k /SUB eff/ following alterations in geometrical and physical parameters of uniformly reflected small reactor assemblies characterized by large neutron leakage from the core. The variant parameters considered are size, shape, density and diluent concentration of the core, and density and thickness of the reflector. The effect of these changes (except core size) manifests, through sigma /SUB c/ the critical surface mass density of the ''corresponding critical core,'' that sigma, the massto-surface-area ratio of the core,'' is essentially a measure of the product /rho/ extended to nonspherical systems and plays a dominant role in the TCF. The functional dependence of k /SUB eff/ on sigma/sigma /SUB c/ , the system size relative to critical, is expressed in the TCF through two alternative representations, namely the modified Wigner rational form and, an exponential form, which is given

  13. Examining the Possibility of an E-Resource Collection Maximal Mass: Looking beyond the Critical Mass of E-Journals

    Science.gov (United States)

    Lamothe, Alain R.

    2014-01-01

    This article investigates the possibility that e-journal collections can reach a maximum size that satisfies long-term patron needs without further significant expansion. The study included collection and usage data taken from 2000 to 2013. In terms of the e-journal collection, the occurrence of a maximal mass appears to be very real. The…

  14. Critical behavior of the Higgs- and Goldstone-mass gaps for the two-dimensional S=1 XY model

    Directory of Open Access Journals (Sweden)

    Yoshihiro Nishiyama

    2015-08-01

    Full Text Available Spectral properties for the two-dimensional quantum S=1 XY model were investigated with the exact diagonalization method. In the symmetry-broken phase, there appear the massive Higgs and massless Goldstone excitations, which correspond to the longitudinal and transverse modes of the spontaneous magnetic moment, respectively. The former excitation branch is embedded in the continuum of the latter, and little attention has been paid to the details, particularly, in proximity to the critical point. The finite-size-scaling behavior is improved by extending the interaction parameters. An analysis of the critical amplitude ratio for these mass gaps is made.

  15. Comprehensive and critical review of the predictive properties of the various mass models

    International Nuclear Information System (INIS)

    Haustein, P.E.

    1984-01-01

    Since the publication of the 1975 Mass Predictions approximately 300 new atomic masses have been reported. These data come from a variety of experimental studies using diverse techniques and they span a mass range from the lightest isotopes to the very heaviest. It is instructive to compare these data with the 1975 predictions and several others (Moeller and Nix, Monahan, Serduke, Uno and Yamada which appeared latter. Extensive numerical and graphical analyses have been performed to examine the quality of the mass predictions from the various models and to identify features in these models that require correction. In general, there is only rough correlation between the ability of a particular model to reproduce the measured mass surface which had been used to refine its adjustable parameters and that model's ability to predict correctly the new masses. For some models distinct systematic features appear when the new mass data are plotted as functions of relevant physical variables. Global intercomparisons of all the models are made first, followed by several examples of types of analysis performed with individual mass models

  16. Critical mass analysis for 235U and 239Pu systems moderated and reflected by D2O

    International Nuclear Information System (INIS)

    Loaiza, D.; Stratton, W.

    1998-01-01

    Criticality dimensions for highly enriched 235 U (93.5) and 239 Pu (95.5) systems mixed with D 2 O were studied. The objective of this work is to investigate the minimum critical mass and concentration of uranium and plutonium systems in a reflector-moderated arrangement. The present work demonstrates the critical instability of some of these systems that are reflected by D 2 O and expands from previously published and unpublished work. These calculations were performed in a spherical geometry with the DANTSYS codes using the Hansen-Roach cross-section library. Densities examined ranged from normal to very small and are assumed to be uniform throughout the core. These spherical systems are reflected by 100 cm of D 2 O

  17. PULSATION-TRIGGERED MASS LOSS FROM AGB STARS: THE 60 DAY CRITICAL PERIOD

    International Nuclear Information System (INIS)

    McDonald, I.; Zijlstra, A. A.

    2016-01-01

    Low- and intermediate-mass stars eject much of their mass during the late, red giant branch (RGB) phase of evolution. The physics of their strong stellar winds is still poorly understood. In the standard model, stellar pulsations extend the atmosphere, allowing a wind to be driven through radiation pressure on condensing dust particles. Here, we investigate the onset of the wind, using nearby RGB stars drawn from the Hipparcos catalog. We find a sharp onset of dust production when the star first reaches a pulsation period of 60 days. This approximately coincides with the point where the star transitions to the first overtone pulsation mode. Models of the spectral energy distributions show stellar mass-loss rate suddenly increasing at this point, by a factor of ∼10 over the existing (chromospherically driven) wind. The dust emission is strongly correlated with both pulsation period and amplitude, indicating stellar pulsation is the main trigger for the strong mass loss, and determines the mass-loss rate. Dust emission does not strongly correlate with stellar luminosity, indicating radiation pressure on dust has little effect on the mass-loss rate. RGB stars do not normally appear to produce dust, whereas dust production by asymptotic giant branch stars appears commonplace, and is probably ubiquitous above the RGB-tip luminosity. We conclude that the strong wind begins with a step change in mass-loss rate and is triggered by stellar pulsations. A second rapid mass-loss-rate enhancement is suggested when the star transitions to the fundamental pulsation mode at a period of ∼300 days.

  18. AUGMENTATION-RELATED BRAIN PLASTICITY

    Directory of Open Access Journals (Sweden)

    Giovanni eDi Pino

    2014-06-01

    Full Text Available Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools.Augmentation modifies function and structure of a number of areas, i.e. primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the

  19. Mass

    International Nuclear Information System (INIS)

    Quigg, Chris

    2007-01-01

    In the classical physics we inherited from Isaac Newton, mass does not arise, it simply is. The mass of a classical object is the sum of the masses of its parts. Albert Einstein showed that the mass of a body is a measure of its energy content, inviting us to consider the origins of mass. The protons we accelerate at Fermilab are prime examples of Einsteinian matter: nearly all of their mass arises from stored energy. Missing mass led to the discovery of the noble gases, and a new form of missing mass leads us to the notion of dark matter. Starting with a brief guided tour of the meanings of mass, the colloquium will explore the multiple origins of mass. We will see how far we have come toward understanding mass, and survey the issues that guide our research today.

  20. Application of the mass-based UNIQUAC model to membrane systems: A critical revision

    International Nuclear Information System (INIS)

    Chovau, S.; Van der Bruggen, B.; Luis, P.

    2012-01-01

    Highlights: ► UNIQUAC model in mass-based terms is considered for the description of sorption equilibria in membrane systems. ► Model validation of molar and mass-based model is performed on simple (vapor + liquid) equilibrium. ► Discrepancy is found between molar and mass-based model, which is attributed to an incorrect conversion. ► Novel model based on correct thermodynamics is provided for future research. - Abstract: The UNIQUAC model is very suitable in describing (liquid + liquid) as well as (vapor + liquid) equilibrium for a wide range of systems. It can be extended to (solvent + polymer) systems for describing sorption equilibria. The original model is expressed in molar-based terms, but requires knowledge of structural parameters and molar masses of all components. Since these cannot always be easily determined for membranes, a conversion to mass-based terms is often performed, which eliminates this issue. Many studies use this model to calculate sorption equilibria in (solvent + polymer) systems. Nevertheless, in this work the conversion from molar to mass-based parameters is postulated to be erroneous. This even leads to an incorrect description of simple (vapor + liquid) equilibrium of pure liquid mixtures and hence it is advised not to use this model for further modeling of sorption equilibrium in (solvent + polymer) systems. In this paper, the errors in the conversion are pinpointed, and the effects it can have on the description of (vapor + liquid) equilibrium, if used improvident, are demonstrated. Furthermore, it is shown that in fact a simple and straightforward conversion can be performed. Finally, in the case when polymers are involved, an adaption and simplification to the model was successfully applied.

  1. Augmented β-Cell Function and Mass in Glucocorticoid-Treated Rodents Are Associated with Increased Islet Ir-β/AKT/mTOR and Decreased AMPK/ACC and AS160 Signaling

    Directory of Open Access Journals (Sweden)

    André O. P. Protzek

    2014-01-01

    Full Text Available Glucocorticoid (GC therapies may adversely cause insulin resistance (IR that lead to a compensatory hyperinsulinemia due to insulin hypersecretion. The increased β-cell function is associated with increased insulin signaling that has the protein kinase B (AKT substrate with 160 kDa (AS160 as an important downstream AKT effector. In muscle, both insulin and AMP-activated protein kinase (AMPK signaling phosphorylate and inactivate AS160, which favors the glucose transporter (GLUT-4 translocation to plasma membrane. Whether AS160 phosphorylation is modulated in islets from GC-treated subjects is unknown. For this, two animal models, Swiss mice and Wistar rats, were treated with dexamethasone (DEX (1 mg/kg body weight for 5 consecutive days. DEX treatment induced IR, hyperinsulinemia, and dyslipidemia in both species, but glucose intolerance and hyperglycemia only in rats. DEX treatment caused increased insulin secretion in response to glucose and augmented β-cell mass in both species that were associated with increased islet content and increased phosphorylation of the AS160 protein. Protein AKT phosphorylation, but not AMPK phosphorylation, was found significantly enhanced in islets from DEX-treated animals. We conclude that the augmented β-cell function developed in response to the GC-induced IR involves inhibition of the islet AS160 protein activity.

  2. The nature of Λ and the mass of the graviton: A critical view

    International Nuclear Information System (INIS)

    Gazeau, J.P.; Novello, M.

    2006-10-01

    The existence of a non-zero cosmological constant Λ gives rise to controversial interpretations. Is Λ a universal constant fixing the geometry of an empty universe, as fundamental as the Planck constant or the speed of light in the vacuum? Its natural place is then on the left-hand side of the Einstein equation. Is it instead something emerging from a perturbative calculus performed on the metric g μν solution of the Einstein equation and to which it might be given a material status of (dark or bright) 'energy'? It should then be part of the content of the right-hand side of the Einstein equations. The purpose of this paper is not to elucidate the fundamental nature of Λ, but instead we aim to present and discuss some of the arguments in favor of both interpretations of the cosmological constant. We will analyse the question of a Λ-dependent graviton mass, more precisely the possibility that between the Compton wavelength of the graviton and the cosmological constant there is the relation l g Λ 1/ 2 ≅ 1. Since a physical quantity like mass originates in a Minkowski conservation law, we proceed to a group theoretical interpretation of this relation in terms of the two possible Λ-deformations of the Poincare group, namely the de Sitter and anti de Sitter groups. We use a very suitable formula, the so-called Garidi mass, and the typically dS/AdS dimensionless parameter ℎH/mc 2 in order to make clear the asymptotic relations between Minkowski masses m and their possible dS/AdS counterparts. We conclude that if the fundamental of the geometry of space-time is Minkowskian, then the square of the mass of the graviton is proportional to Λ; otherwise, if the fundamental state is deSitter/AdS, then the graviton is massless in the deSitterian sense. (authors)

  3. Critical Mass: Is Female Marine Attrition Higher in Non-Traditional Military Occupational Specialties

    Science.gov (United States)

    2017-03-01

    World War II had to be set aside with the acknowledgment that the service of women proved critical to military success in the past and could be...the Women’s Armed Services Integration Act of 1948 (Borlik, 1998). Additionally, women could now serve full-time in active components (Schulte... women make a difference. Seemingly, these views are in line with Dahlerup’s politics as a workplace perspective which address “the importance of

  4. Cell fusion in osteoclasts plays a critical role in controlling bone mass and osteoblastic activity

    International Nuclear Information System (INIS)

    Iwasaki, Ryotaro; Ninomiya, Ken; Miyamoto, Kana; Suzuki, Toru; Sato, Yuiko

    2008-01-01

    The balance between osteoclast and osteoblast activity is central for maintaining the integrity of bone homeostasis. Here we show that mice lacking dendritic cell specific transmembrane protein (DC-STAMP), an essential molecule for osteoclast cell-cell fusion, exhibited impaired bone resorption and upregulation of bone formation by osteoblasts, which do not express DC-STAMP, which led to increased bone mass. On the contrary, DC-STAMP over-expressing transgenic (DC-STAMP-Tg) mice under the control of an actin promoter showed significantly accelerated cell-cell fusion of osteoclasts and bone resorption, with decreased osteoblastic activity and bone mass. Bone resorption and formation are known to be regulated in a coupled manner, whereas DC-STAMP regulates bone homeostasis in an un-coupled manner. Thus our results indicate that inhibition of a single molecule provides both decreased osteoclast activity and increased bone formation by osteoblasts, thereby increasing bone mass in an un-coupled and a tissue specific manner.

  5. Probing the critical behavior in the evolution of GDR width at very low temperatures in A∼100 mass region

    Energy Technology Data Exchange (ETDEWEB)

    Dey, Balaram; Mondal, Debasish; Pandit, Deepak; Mukhopadhyay, S.; Pal, Surajit [Variable Energy Cyclotron Centre, 1/AF-Bidhannagar, Kolkata 700064 (India); Bhattacharya, Srijit [Department of Physics, Barasat Govt. College, Barasat, N 24 Pgs, Kolkata 700124 (India); De, A. [Department of Physics, Raniganj Girls' College, Raniganj 713358 (India); Banerjee, K. [Variable Energy Cyclotron Centre, 1/AF-Bidhannagar, Kolkata 700064 (India); Dinh Dang, N. [Theoretical Nuclear Physics Laboratory, RIKEN Nishina Center for Accelerator-Based Science, RIKEN, 2-1 Hirosawa, Wako city, Saitama 351-0198 (Japan); Quang Hung, N. [School of Engineering, Tan Tao University, Tan Tao University Avenue, Tan Duc Ecity, Duc Hoa, Long An Province (Viet Nam); Banerjee, S.R., E-mail: srb@vecc.gov.in [Variable Energy Cyclotron Centre, 1/AF-Bidhannagar, Kolkata 700064 (India)

    2014-04-04

    The influence of giant dipole resonance (GDR) induced quadrupole moment on GDR width at low temperatures is investigated experimentally by measuring GDR width systematically in the unexplored temperature range T=0.8–1.5 MeV, for the first time, in A∼100 mass region. The measured GDR widths, using alpha induced fusion reaction, for {sup 97}Tc confirm that the GDR width remains constant at the ground state value up to a critical temperature and increases sharply thereafter with increase in T. The data have been compared with the adiabatic Thermal Shape Fluctuation Model (TSFM), phenomenological Critical Temperature Fluctuation Model (CTFM) and microscopic Phonon Damping Model (PDM). Interestingly, CTFM and PDM give similar results and agree with the data, whereas the TSFM differs significantly even after incorporating the shell effects.

  6. Probing the critical behavior in the evolution of GDR width at very low temperatures in A∼100 mass region

    International Nuclear Information System (INIS)

    Dey, Balaram; Mondal, Debasish; Pandit, Deepak; Mukhopadhyay, S.; Pal, Surajit; Bhattacharya, Srijit; De, A.; Banerjee, K.; Dinh Dang, N.; Quang Hung, N.; Banerjee, S.R.

    2014-01-01

    The influence of giant dipole resonance (GDR) induced quadrupole moment on GDR width at low temperatures is investigated experimentally by measuring GDR width systematically in the unexplored temperature range T=0.8–1.5 MeV, for the first time, in A∼100 mass region. The measured GDR widths, using alpha induced fusion reaction, for 97 Tc confirm that the GDR width remains constant at the ground state value up to a critical temperature and increases sharply thereafter with increase in T. The data have been compared with the adiabatic Thermal Shape Fluctuation Model (TSFM), phenomenological Critical Temperature Fluctuation Model (CTFM) and microscopic Phonon Damping Model (PDM). Interestingly, CTFM and PDM give similar results and agree with the data, whereas the TSFM differs significantly even after incorporating the shell effects.

  7. Guide for the preparation of applications for special nuclear material licenses of less than critical mass quantities - July 1976

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    This guide describes the type of information needed to evaluate an application for a specific license for receipt, possession, use, and transfer of special nuclear material. It is intended for applicants requesting authorization to possess and use up to 2000 grams of plutonium, total, in the form of sealed plutonium-beryllium neutron sources, and any special nuclear material in quantities and forms not sufficient to form a critical mass. The latter quantities are considered to be 350 grams of contained uranium-235, 200 grams of uranium-233, 200 grams of plutonium (in any form other than plutonium-beryllium neutron sources) or any combination of them

  8. The relation between mass-gap amplitudes and critical exponents in the Heisenberg model

    International Nuclear Information System (INIS)

    Alcaraz, F.C.; Felicio, J.R.D. de

    1985-01-01

    A recent result concerning the universality of the ratio of mass-gap amplitudes using the well known 1-D Heisenberg model which is the quantum version of the two-dimensional eight-vertex model is discussed. The believed extended scaling relation (x sub(p) = x sub(is an element of)/4) relating the polarization and energy anomalous dimensions is confirmed. The exponent, α, ν, γ sub(m) and γ sub(p) is also obtained by usual phenomenological renormalization group methods. (Author) [pt

  9. Critical Evaluation of Native Electrospray Ionization Mass Spectrometry for Fragment-Based Screening.

    Science.gov (United States)

    Göth, Melanie; Badock, Volker; Weiske, Jörg; Pagel, Kevin; Kuropka, Benno

    2017-08-08

    Fragment-based screening presents a promising alternative to high-throughput screening and has gained great attention in recent years. So far, only a few studies have discussed mass spectrometry as a screening technology for fragments. Herein, we report the application of native electrospray ionization mass spectrometry (MS) for screening defined sets of fragments against four different target proteins. Fragments were selected from a primary screening conducted with a thermal shift assay (TSA) and represented different binding categories. Our data indicated that, beside specific complex formation, many fragments show extensive multiple binding and also charge-state shifts. Both of these factors complicate automated data analysis and decrease the attractiveness of native MS as a primary screening tool for fragments. A comparison of the hits identified by native MS and TSA showed good agreement for two of the proteins. Furthermore, we discuss general challenges, including the determination of an optimal fragment concentration and the question of how to rank fragment hits according to their affinity. In conclusion, we consider native MS to be a highly valuable tool for the validation and deeper investigation of promising fragment hits rather than a method for primary screening. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Isotope ratio mass spectrometry as a tool for source inference in forensic science: A critical review.

    Science.gov (United States)

    Gentile, Natacha; Siegwolf, Rolf T W; Esseiva, Pierre; Doyle, Sean; Zollinger, Kurt; Delémont, Olivier

    2015-06-01

    Isotope ratio mass spectrometry (IRMS) has been used in numerous fields of forensic science in a source inference perspective. This review compiles the studies published on the application of isotope ratio mass spectrometry (IRMS) to the traditional fields of forensic science so far. It completes the review of Benson et al. [1] and synthesises the extent of knowledge already gathered in the following fields: illicit drugs, flammable liquids, human provenancing, microtraces, explosives and other specific materials (packaging tapes, safety matches, plastics, etc.). For each field, a discussion assesses the state of science and highlights the relevance of the information in a forensic context. Through the different discussions which mark out the review, the potential and limitations of IRMS, as well as the needs and challenges of future studies are emphasized. The paper elicits the various dimensions of the source which can be obtained from the isotope information and demonstrates the transversal nature of IRMS as a tool for source inference. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  11. Impaired physical function, loss of muscle mass and assessment of biomechanical properties in critical ill patients

    DEFF Research Database (Denmark)

    Poulsen, Jesper Brøndum

    2012-01-01

    Intensive care unit (ICU) admission is associated with muscle weakness and ICU survivors report sustained limitation of physical capacity for years after discharge. Limited information is available on the underlying biomechanical properties responsible for this muscle function impairment. A plaus......Intensive care unit (ICU) admission is associated with muscle weakness and ICU survivors report sustained limitation of physical capacity for years after discharge. Limited information is available on the underlying biomechanical properties responsible for this muscle function impairment....... A plausible contributor to the accentuated catabolic drive in ICU patients is a synergistic response to inflammation and inactivity leading to loss of muscle mass. As these entities are predominantly present in the early phase of ICU stay, interventions employed during this time frame may exhibit the greatest...... potential to counteract loss of muscle mass. Despite the obvious clinical significance of muscle atrophy for the functional impairment observed in ICU survivors, no preventive therapies have been identified as yet. The overall aim of the present dissertation is to characterize aspects of physical function...

  12. Secondary Breast Augmentation.

    Science.gov (United States)

    Brown, Mitchell H; Somogyi, Ron B; Aggarwal, Shagun

    2016-07-01

    After studying this article, the participant should be able to: 1. Assess common clinical problems in the secondary breast augmentation patient. 2. Describe a treatment plan to correct the most common complications of breast augmentation. 3. Provide surgical and nonsurgical options for managing complications of breast augmentation. 4. Decrease the incidence of future complications through accurate assessment, preoperative planning, and precise surgical technique. Breast augmentation has been increasing steadily in popularity over the past three decades. Many of these patients present with secondary problems or complications following their primary breast augmentation. Two of the most common complications are capsular contracture and implant malposition. Familiarity and comfort with the assessment and management of these complications is necessary for all plastic surgeons. An up-to-date understanding of current devices and techniques may decrease the need to manage future complications from the current cohort of breast augmentation patients.

  13. Critical Heat Flux Phenomena at HighPressure & Low Mass Fluxes: NEUP Final Report Part I: Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Corradini, Michael [Univ. of Wisconsin, Madison, WI (United States); Wu, Qiao [Oregon State Univ., Corvallis, OR (United States)

    2015-04-30

    This report is a preliminary document presenting an overview of the Critical Heat Flux (CHF) phenomenon, the High Pressure Critical Heat Flux facility (HPCHF), preliminary CHF data acquired, and the future direction of the research. The HPCHF facility has been designed and built to study CHF at high pressure and low mass flux ranges in a rod bundle prototypical of conceptual Small Modular Reactor (SMR) designs. The rod bundle is comprised of four electrically heated rods in a 2x2 square rod bundle with a prototypic chopped-cosine axial power profile and equipped with thermocouples at various axial and circumferential positions embedded in each rod for CHF detection. Experimental test parameters for CHF detection range from pressures of ~80 – 160 bar, mass fluxes of ~400 – 1500 kg/m2s, and inlet water subcooling from ~30 – 70°C. The preliminary data base established will be further extended in the future along with comparisons to existing CHF correlations, models, etc. whose application ranges may be applicable to the conditions of SMRs.

  14. Mass customization process for the Social Housing. Potentiality, critical points, research lines

    Directory of Open Access Journals (Sweden)

    Michele Di Sivo

    2012-10-01

    Full Text Available The demand for lengthening the life cycle of the residential estate, engendered with the economical and housing crisis since the last few years, brings out, in the course of time, the need for conservation and improvement works of the property house performances, through the direct involvement of the users. The possibility of reducing maintenance and adjustment costs may develop into a project resource, consistent to the participation and cooperation principles, identifying social housing interventions. With this aim, the BETHA group of the d’Annunzio University is investigating the potentiality of technological transfer of the ‘mass customization’ process from the industrial products field to the social housing segment, by detecting issues, strategies and opportunities.

  15. Existing equations to estimate lean body mass are not accurate in the critically ill: Results of a multicenter observational study.

    Science.gov (United States)

    Moisey, Lesley L; Mourtzakis, Marina; Kozar, Rosemary A; Compher, Charlene; Heyland, Daren K

    2017-12-01

    Lean body mass (LBM), quantified using computed tomography (CT), is a significant predictor of clinical outcomes in the critically ill. While CT analysis is precise and accurate in measuring body composition, it may not be practical or readily accessible to all patients in the intensive care unit (ICU). Here, we assessed the agreement between LBM measured by CT and four previously developed equations that predict LBM using variables (i.e. age, sex, weight, height) commonly recorded in the ICU. LBM was calculated in 327 critically ill adults using CT scans, taken at ICU admission, and 4 predictive equations (E1-4) that were derived from non-critically adults since there are no ICU-specific equations. Agreement was assessed using paired t-tests, Pearson's correlation coefficients and Bland-Altman plots. Median LBM calculated by CT was 45 kg (IQR 37-53 kg) and was significantly different (p LBM (error ranged from 7.5 to 9.9 kg), compared with LBM calculated by CT, suggesting insufficient agreement. Our data indicates a large bias is present between the calculation of LBM by CT imaging and the predictive equations that have been compared here. This underscores the need for future research toward the development of ICU-specific equations that reliably estimate LBM in a practical and cost-effective manner. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  16. Test of the critical point symmetry X(5) in the mass region A=180

    Energy Technology Data Exchange (ETDEWEB)

    Melon, B.; Dewald, A.; Moeller, O.; Pissulla, T.; Fransen, C.; Jolie, J.; Linnemann, A.; Zell, K.O. [IKP, Univ. zu Koeln (Germany); Petkov, P. [Bulg. Acad. of Sciences, Inst. for Nucl. Res. and Nucl. Ener., Sofia (Bulgaria); Tonev, D.; Angelis, G. De; Bazzacco, D. [INFN, LN di Legnaro (Italy); Ur, C.; Menegazzo, R.; Farnea, E. [Dip. di Fisica, Univ.' and INFN Sez. Padova (Italy)

    2007-07-01

    Recently, the first examples of X(5) like nuclei in the mass region A=180 have been identified, {sup 176,178}Os. We report on further results of a lifetime measurement performed at the LN Legnaro using the Koeln coincidence plunger device and the GASP spectrometer. Excited states were populated via the reaction {sup 152}Sm({sup 29}Si,5n){sup 176}Os at E({sup 29}Si) = 145 MeV. Special effort has been made to reduce the experimental uncertainty of the B(E2, 2{sub 1}{sup +} {yields} 0{sub 1}{sup +}) value in {sup 178}Os, used for transition strength normalizations in {sup 178}Os necessary for the comparison with theoretical models. A second experiment was performed to measure the lifetime of the first excited 2{sup +} state in {sup 178}Os with the Koeln coincidence plunger device at the FN Tandem accelerator of the University of Cologne using THE {sup 166}Er({sup 16}O,4n){sup 178}Os reaction at E({sup 16}O) = 80 MeV. The resulting lifetime has been compared to the value obtained using the delayed coincidence method. (orig.)

  17. Critical capacity, travel time delays and travel time distribution of rapid mass transit systems

    Science.gov (United States)

    Legara, Erika Fille; Monterola, Christopher; Lee, Kee Khoon; Hung, Gih Guang

    2014-07-01

    We set up a mechanistic agent-based model of a rapid mass transit system. Using empirical data from Singapore's unidentifiable smart fare card, we validate our model by reconstructing actual travel demand and duration of travel statistics. We subsequently use this model to investigate two phenomena that are known to significantly affect the dynamics within the RTS: (1) overloading in trains and (2) overcrowding in the RTS platform. We demonstrate that by varying the loading capacity of trains, a tipping point emerges at which an exponential increase in the duration of travel time delays is observed. We also probe the impact on the rail system dynamics of three types of passenger growth distribution across stations: (i) Dirac delta, (ii) uniform and (iii) geometric, which is reminiscent of the effect of land use on transport. Under the assumption of a fixed loading capacity, we demonstrate the dependence of a given origin-destination (OD) pair on the flow volume of commuters in station platforms.

  18. Confronting an Augmented Reality

    Science.gov (United States)

    Munnerley, Danny; Bacon, Matt; Wilson, Anna; Steele, James; Hedberg, John; Fitzgerald, Robert

    2012-01-01

    How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself ? In this article, we seek to initiate a discussion that focuses on these questions, and…

  19. Augmented Reality on Android

    OpenAIRE

    Chunghan Li; Chang-Shyh Peng; Daisy F. Sang

    2013-01-01

    Augmented Reality is an application which combines a live view of real-world environment and computer-generated images. This paper studies and demonstrates an efficient Augmented Reality development in the mobile Android environment with the native Java language and Android SDK. Major components include Barcode Reader, File Loader, Marker Detector, Transform Matrix Generator, and a cloud database.

  20. Liquid sample introduction in inductively coupled plasma atomic emission and mass spectrometry — Critical review

    Energy Technology Data Exchange (ETDEWEB)

    Bings, N.H., E-mail: bings@uni-mainz.de; Orlandini von Niessen, J.O.; Schaper, J.N.

    2014-10-01

    Inductively coupled plasma optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS) can be considered as the most important tools in inorganic analytical chemistry. Huge progress has been made since the first analytical applications of the ICP. More stable RF generators, improved spectrometers and detection systems were designed along with the achievements gained from advanced microelectronics, leading to overall greatly improved analytical performance of such instruments. In contrast, for the vast majority of cases liquid sample introduction is still based on the pneumatic principle as described in the late 19th century. High flow pneumatic nebulizers typically demand the use of spray chambers as “aerosol filters” in order to match the prerequisites of an ICP. By this, only a small fraction of the nebulized sample actually contributes to the measured signal. Hence, the development of micronebulizers was brought forward. Those systems produce fine aerosols at low sample uptake rates, but they are even more prone for blocking or clogging than conventional systems in the case of solutions containing a significant amount of total dissolved solids (TDS). Despite the high number of publications devoted to liquid sample introduction, it is still considered the Achilles' heel of atomic spectrometry and it is well accepted, that the technology used for liquid sample introduction is still far from ideal, even when applying state-of-the-art systems. Therefore, this review is devoted to offer an update on developments in the field liquid sample introduction that had been reported until the year 2013. The most recent and noteworthy contributions to this field are discussed, trends are highlighted and future directions are outlined. The first part of this review provides a brief overview on theoretical considerations regarding conventional pneumatic nebulization, the fundamentals on aerosol generation and discusses characteristics of aerosols ideally

  1. Liquid sample introduction in inductively coupled plasma atomic emission and mass spectrometry — Critical review

    International Nuclear Information System (INIS)

    Bings, N.H.; Orlandini von Niessen, J.O.; Schaper, J.N.

    2014-01-01

    Inductively coupled plasma optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS) can be considered as the most important tools in inorganic analytical chemistry. Huge progress has been made since the first analytical applications of the ICP. More stable RF generators, improved spectrometers and detection systems were designed along with the achievements gained from advanced microelectronics, leading to overall greatly improved analytical performance of such instruments. In contrast, for the vast majority of cases liquid sample introduction is still based on the pneumatic principle as described in the late 19th century. High flow pneumatic nebulizers typically demand the use of spray chambers as “aerosol filters” in order to match the prerequisites of an ICP. By this, only a small fraction of the nebulized sample actually contributes to the measured signal. Hence, the development of micronebulizers was brought forward. Those systems produce fine aerosols at low sample uptake rates, but they are even more prone for blocking or clogging than conventional systems in the case of solutions containing a significant amount of total dissolved solids (TDS). Despite the high number of publications devoted to liquid sample introduction, it is still considered the Achilles' heel of atomic spectrometry and it is well accepted, that the technology used for liquid sample introduction is still far from ideal, even when applying state-of-the-art systems. Therefore, this review is devoted to offer an update on developments in the field liquid sample introduction that had been reported until the year 2013. The most recent and noteworthy contributions to this field are discussed, trends are highlighted and future directions are outlined. The first part of this review provides a brief overview on theoretical considerations regarding conventional pneumatic nebulization, the fundamentals on aerosol generation and discusses characteristics of aerosols ideally

  2. Magnetohydrodynamic Augmented Propulsion Experiment

    Science.gov (United States)

    Litchford, Ron J.; Cole, John; Lineberry, John; Chapman, Jim; Schmidt, Harold; Cook, Stephen (Technical Monitor)

    2002-01-01

    A fundamental obstacle to routine space access is the specific energy limitations associated with chemical fuels. In the case of vertical take-off, the high thrust needed for vertical liftoff and acceleration to orbit translates into power levels in the 10 GW range. Furthermore, useful payload mass fractions are possible only if the exhaust particle energy (i.e., exhaust velocity) is much greater than that available with traditional chemical propulsion. The electronic binding energy released by the best chemical reactions (e.g., LOX/LH2 for example, is less than 2 eV per product molecule (approx. 1.8 eV per H2O molecule), which translates into particle velocities less than 5 km/s. Useful payload fractions, however, will require exhaust velocities exceeding 15 km/s (i.e., particle energies greater than 20 eV). As an added challenge, the envisioned hypothetical RLV (reusable launch vehicle) should accomplish these amazing performance feats while providing relatively low acceleration levels to orbit (2-3g maximum). From such fundamental considerations, it is painfully obvious that planned and current RLV solutions based on chemical fuels alone represent only a temporary solution and can only result in minor gains, at best. What is truly needed is a revolutionary approach that will dramatically reduce the amount of fuel and size of the launch vehicle. This implies the need for new compact high-power energy sources as well as advanced accelerator technologies for increasing engine exhaust velocity. Electromagnetic acceleration techniques are of immense interest since they can be used to circumvent the thermal limits associated with conventional propulsion systems. This paper describes the Magnetohydrodynamic Augmented Propulsion Experiment (MAPX) being undertaken at NASA Marshall Space Flight Center (MSFC). In this experiment, a 1-MW arc heater is being used as a feeder for a 1-MW magnetohydrodynamic (MHD) accelerator. The purpose of the experiment is to demonstrate

  3. Critical Factors Affecting the Success of Cloning, Expression, and Mass Production of Enzymes by Recombinant E. coli.

    Science.gov (United States)

    Fakruddin, Md; Mohammad Mazumdar, Reaz; Bin Mannan, Khanjada Shahnewaj; Chowdhury, Abhijit; Hossain, Md Nur

    2013-01-01

    E. coli is the most frequently used host for production of enzymes and other proteins by recombinant DNA technology. E. coli is preferable for its relative simplicity, inexpensive and fast high-density cultivation, well-known genetics, and large number of compatible molecular tools available. Despite all these advantages, expression and production of recombinant enzymes are not always successful and often result in insoluble and nonfunctional proteins. There are many factors that affect the success of cloning, expression, and mass production of enzymes by recombinant E. coli. In this paper, these critical factors and approaches to overcome these obstacles are summarized focusing controlled expression of target protein/enzyme in an unmodified form at industrial level.

  4. A computation method for mass flowrate predictions in critical flows of initially subcooled liquid in long channels

    International Nuclear Information System (INIS)

    Celata, G.P.; D'Annibale, F.; Farello, G.E.

    1985-01-01

    It is suggested a fast and accurate computation method for the prediction of mass flowrate in critical flows initially subcooled liquid from ''long'' discharge channels (high LID values). Starting from a previous very simple correlation proposed by the authors, further improvements in the model enable to widen the method reliability up to initial saturation conditions. A comparison of computed values with 145 experimental data regarding several investigations carried out at the Heat Transfer Laboratory (TERM/ISP, ENEA Casaccia) shows an excellent agreement. The computed data shifting from experimental ones is within ±10% for almost all data, with a slight increase towards low inlet subcoolings. The average error, for all the considered data, is 4,6%

  5. Controlling bistability by linear augmentation

    International Nuclear Information System (INIS)

    Sharma, Pooja Rani; Shrimali, Manish Dev; Prasad, Awadhesh; Feudel, Ulrike

    2013-01-01

    In many bistable oscillating systems only one of the attractors is desired to possessing certain system performance. We present a method to drive a bistable system to a desired target attractor by annihilating the other one. This shift from bistability to monostability is achieved by augmentation of the nonlinear oscillator with a linear control system. For a proper choice of the control function one of the attractors disappears at a critical coupling strength in an control-induced boundary crisis. This transition from bistability to monostability is demonstrated with two paradigmatic examples, the autonomous Chua oscillator and a neuronal system with a periodic input signal.

  6. Problems Inherent to Augmentation of Natural Enemies in Open Agriculture.

    Science.gov (United States)

    Michaud, J P

    2018-04-01

    Augmentation biological control has successfully replaced a lot of insecticide use in 'closed system' agriculture (e.g., greenhouses). The profitable commercialization of biocontrol agents in greenhouses has created an incentive to expand markets for mass-reared beneficial insects into open agricultural systems, often without sufficient scientific justification. However, the semi-contained nature of greenhouse culture is often critical to the success of augmentation and can serve to mask potential pitfalls and intrinsic limitations of this approach in open systems. Factors contributing to greenhouse successes include the reduced biological diversity of contained agroecosystems, the prevention of agent dispersal, the ability to maintain environmental conditions within a range favorable for the agent, the exclusion of competitors and natural enemies of the agent that might otherwise diminish its efficacy, and the absence of alternative prey/hosts that could divert predation/parasitism from the target pest. There are also problems arising from collection of source material from locally adapted populations, and the inadvertent imposition of artificial selection in the course of laboratory rearing. Besides highlighting these pitfalls, this paper aims to encourage more consideration of conservation approaches prior to investment in augmentation programs which entice farmers into perpetual cycles of 'rear and release.' I argue that although augmentation can benefit agriculture whenever it replaces pesticide applications, it does not constitute an ecologically sustainable solution because it requires continued inputs, and it can distract research attention away from more sustainable objectives. Sustainable biological control is best achieved through modifications to cultural practices that increasingly 'naturalize' agroecosystems, thus facilitating the natural recruitment and persistence of beneficial arthropod fauna, combined with habitat management geared to increasing

  7. Why are there race/ethnic differences in adult body mass index–adiposity relationships? A quantitative critical review

    Science.gov (United States)

    Heymsfield, S. B.; Peterson, C. M.; Thomas, D. M.; Heo, M.; Schuna, J. M.

    2016-01-01

    Summary Body mass index (BMI) is now the most widely used measure of adiposity on a global scale. Nevertheless, intense discussion centers on the appropriateness of BMI as a phenotypic marker of adiposity across populations differing in race and ethnicity. BMI-adiposity relations appear to vary significantly across race/ethnic groups, but a collective critical analysis of these effects establishing their magnitude and underlying body shape/composition basis is lacking. Accordingly, we systematically review the magnitude of these race-ethnic differences across non-Hispanic (NH) white, NH black and Mexican American adults, their anatomic body composition basis and potential biologically linked mechanisms, using both earlier publications and new analyses from the US National Health and Nutrition Examination Survey. Our collective observations provide a new framework for critically evaluating the quantitative relations between BMI and adiposity across groups differing in race and ethnicity; reveal new insights into BMI as a measure of adiposity across the adult age-span; identify knowledge gaps that can form the basis of future research and create a quantitative foundation for developing BMI-related public health recommendations. PMID:26663309

  8. Why are there race/ethnic differences in adult body mass index-adiposity relationships? A quantitative critical review.

    Science.gov (United States)

    Heymsfield, S B; Peterson, C M; Thomas, D M; Heo, M; Schuna, J M

    2016-03-01

    Body mass index (BMI) is now the most widely used measure of adiposity on a global scale. Nevertheless, intense discussion centers on the appropriateness of BMI as a phenotypic marker of adiposity across populations differing in race and ethnicity. BMI-adiposity relations appear to vary significantly across race/ethnic groups, but a collective critical analysis of these effects establishing their magnitude and underlying body shape/composition basis is lacking. Accordingly, we systematically review the magnitude of these race-ethnic differences across non-Hispanic (NH) white, NH black and Mexican American adults, their anatomic body composition basis and potential biologically linked mechanisms, using both earlier publications and new analyses from the US National Health and Nutrition Examination Survey. Our collective observations provide a new framework for critically evaluating the quantitative relations between BMI and adiposity across groups differing in race and ethnicity; reveal new insights into BMI as a measure of adiposity across the adult age-span; identify knowledge gaps that can form the basis of future research and create a quantitative foundation for developing BMI-related public health recommendations. © 2015 World Obesity.

  9. The Dependence of CNT Aerogel Synthesis on Sulfur-driven Catalyst Nucleation Processes and a Critical Catalyst Particle Mass Concentration.

    Science.gov (United States)

    Hoecker, Christian; Smail, Fiona; Pick, Martin; Weller, Lee; Boies, Adam M

    2017-11-06

    The floating catalyst chemical vapor deposition (FC-CVD) process permits macro-scale assembly of nanoscale materials, enabling continuous production of carbon nanotube (CNT) aerogels. Despite the intensive research in the field, fundamental uncertainties remain regarding how catalyst particle dynamics within the system influence the CNT aerogel formation, thus limiting effective scale-up. While aerogel formation in FC-CVD reactors requires a catalyst (typically iron, Fe) and a promotor (typically sulfur, S), their synergistic roles are not fully understood. This paper presents a paradigm shift in the understanding of the role of S in the process with new experimental studies identifying that S lowers the nucleation barrier of the catalyst nanoparticles. Furthermore, CNT aerogel formation requires a critical threshold of Fe x C y  > 160 mg/m 3 , but is surprisingly independent of the initial catalyst diameter or number concentration. The robustness of the critical catalyst mass concentration principle is proved further by producing CNTs using alternative catalyst systems; Fe nanoparticles from a plasma spark generator and cobaltocene and nickelocene precursors. This finding provides evidence that low-cost and high throughput CNT aerogel routes may be achieved by decoupled and enhanced catalyst production and control, opening up new possibilities for large-scale CNT synthesis.

  10. Media-Augmented Exercise Machines

    Science.gov (United States)

    Krueger, T.

    2002-01-01

    Cardio-vascular exercise has been used to mitigate the muscle and cardiac atrophy associated with adaptation to micro-gravity environments. Several hours per day may be required. In confined spaces and long duration missions this kind of exercise is inevitably repetitive and rapidly becomes uninteresting. At the same time, there are pressures to accomplish as much as possible given the cost- per-hour for humans occupying orbiting or interplanetary. Media augmentation provides a the means to overlap activities in time by supplementing the exercise with social, recreational, training or collaborative activities and thereby reducing time pressures. In addition, the machine functions as an interface to a wide range of digital environments allowing for spatial variety in an otherwise confined environment. We hypothesize that the adoption of media augmented exercise machines will have a positive effect on psycho-social well-being on long duration missions. By organizing and supplementing exercise machines, data acquisition hardware, computers and displays into an interacting system this proposal increases functionality with limited additional mass. This paper reviews preliminary work on a project to augment exercise equipment in a manner that addresses these issues and at the same time opens possibilities for additional benefits. A testbed augmented exercise machine uses a specialty built cycle trainer as both input to a virtual environment and as an output device from it using spatialized sound, and visual displays, vibration transducers and variable resistance. The resulting interactivity increases a sense of engagement in the exercise, provides a rich experience of the digital environments. Activities in the virtual environment and accompanying physiological and psychological indicators may be correlated to track and evaluate the health of the crew.

  11. Augmented reality: a review.

    Science.gov (United States)

    Berryman, Donna R

    2012-01-01

    Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries.

  12. The HART I augmented electric gun facility

    International Nuclear Information System (INIS)

    Fikse, D.A.; Ciesar, J.A.; Wehrli, H.A.; Rimersma, H.; Docherty, E.F.; Pipich, C.W.

    1991-01-01

    This paper reports on an augmented electric gun system that has been commissioned. This system, called HART I (Hypervelocity Augmented Railgun Test), is built around a double augmented rail arrangement with a 1.27-cm square bore. It is powered by the SUVAC II 5.6-MJ distributed capacitor power supply. This arrangement allows operation in a simple, series augmented, or transaugmented gun system configuration. The objective of this facility is to perform materials research augmentation studies, and armature development in the 10-km/s regime. Armature masses of 2 to 4 g will be accelerated in a 4-m long barrel. Baseline bore materials will begin with conventional G9/GlidCop systems and then move into pyrolytic boron nitride/refractory materials. Hybrids, plasma, and ablation stabilized armature systems are planned. The gun system is instrumented with plasma and rail B probes for inbore velocity measurements. In addition, breech and muzzle voltages, currents, and external velocities are measured. The HART I system is currently performing hypervelocity experiments to verify the augmentation models

  13. Augmented Reality, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Augmented Reality systems come with many benefits derived by co-locating information with a user's environment through the use of one or more output modalities such...

  14. Chin augmentation - slideshow

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/presentations/100009.htm Chin augmentation - series—Normal anatomy To use the sharing features ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  15. Augmenting Clozapine With Sertindole

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Emborg, Charlotte; Gydesen, Susanne

    2012-01-01

    Clozapine augmentation with antipsychotic drugs is widely used despite sparse evidence supporting this strategy. Sertindole is a nonsedating atypical antipsychotic drug with low affinity for cholinergic receptors, which makes it potentially suitable for augmentation of clozapine. The study design...... glucose, lipids, and electrocardiogram. Clozapine augmentation with sertindole was not superior to placebo regarding total score or subscale score of the Positive and Negative Syndrome Scale, Clinical Global Impression, World Health Organization Quality of Life Brief, or Drug Attitude Inventory....... No increased adverse effects compared with placebo were found. Four patients randomized to sertindole experienced a significant worsening of psychosis, and 2 of them required psychiatric admission. Metabolic parameters were unchanged during the study, but augmentation of clozapine with sertindole...

  16. Breast augmentation - slideshow

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/presentations/100205.htm Breast augmentation - series—Normal anatomy To use the sharing features ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  17. Augmented reality in neurosurgery.

    Science.gov (United States)

    Tagaytayan, Raniel; Kelemen, Arpad; Sik-Lanyi, Cecilia

    2018-04-01

    Neurosurgery is a medical specialty that relies heavily on imaging. The use of computed tomography and magnetic resonance images during preoperative planning and intraoperative surgical navigation is vital to the success of the surgery and positive patient outcome. Augmented reality application in neurosurgery has the potential to revolutionize and change the way neurosurgeons plan and perform surgical procedures in the future. Augmented reality technology is currently commercially available for neurosurgery for simulation and training. However, the use of augmented reality in the clinical setting is still in its infancy. Researchers are now testing augmented reality system prototypes to determine and address the barriers and limitations of the technology before it can be widely accepted and used in the clinical setting.

  18. Exploration Augmentation Module Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Exploration Augmentation Module (EAM) project goal is to design and deliver a flight module that is to be deployed to Earth-Lunar Distant Retrograde Orbit (DRO)....

  19. The critical mass

    International Nuclear Information System (INIS)

    Logan, J.

    1996-01-01

    This article discusses in detail the historical background leading to different lines of scientific thinking in the Allied and in the German scientific communities around the feasibility and development of an atomic bomb. An extensive, parallel time table is given along with discussions of the basic theories of the major players during the conception and development of a nuclear program in both arenas. 35 refs., 11 figs., 5 tabs

  20. Marketing and Augmented Reality

    OpenAIRE

    Zelený, Martin

    2010-01-01

    The main goal of this diploma thesis is to identify the usage of augmented reality in contemporary marketing practice and the expectations of marketers for the future use. This will be achieved by conducting a quantitative and qualitative research among existing creative and advertising companies. Secondary goal is introducing the concept of augmented reality from the theoretical point of view and also description of potential utilization based on known examples. The tools for the practical p...

  1. INFORMATION VIA AUGMENTED

    OpenAIRE

    Tetteh, Sampson

    2015-01-01

    The vast majority of mobile technology today has developed over the past dec-ades. The thirst for information and communication has brought about high data transfer speed on modern mobile handset devices. This makes it possible for Augmented Reality to be used on mobile phones. Vaasa University of Applied Science, Technobothnia science resource center and Lumivaara Museum saw the importance of information and decided to embark on a pilot project where Augmented Reality will not be only us...

  2. Confronting an augmented reality

    Directory of Open Access Journals (Sweden)

    John Hedberg

    2012-08-01

    Full Text Available How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself? In this article, we seek to initiate a discussion that focuses on these questions, and suggest that they be used as drivers for research into effective educational applications of augmented reality. We discuss how multi-modal, sensorial augmentation of reality links to existing theories of education and learning, focusing on ideas of cognitive dissonance and the confrontation of new realities implied by exposure to new and varied perspectives. We also discuss connections with broader debates brought on by the social and cultural changes wrought by the increased digitalisation of our lives, especially the concept of the extended mind. Rather than offer a prescription for augmentation, our intention is to throw open debate and to provoke deep thinking about what interacting with and creating an augmented reality might mean for both teacher and learner.

  3. Critical Mass als performative Kritik der städtischen Verkehrspolitik? Fahrradfahren mit Judith Butler auf dem Gepäckträger

    Directory of Open Access Journals (Sweden)

    Anke Strüver

    2015-11-01

    Full Text Available Obwohl die meisten deutschen Großstädte über eine sehr schlechte Radverkehrsinfrastruktur verfügen, gewinnent innerstädtisches Radfahren und ein Engagement für das Rad als gleichberechtigtes Verkehrsmittel stark an Bedeutung. Als Indiz für dieses Engagement gelten in Hamburg die monatlichen Critical Mass Radfahrten unter dem Motto „We aren’t blocking traffic… we are traffic!“. Der Beitrag fragt vor diesem Hintergrund, inwiefern die Critical Mass als Aktionsform in Hamburg den Diskurs der autogerechten Stadt, die Straßenverkehrspolitik und die dominante räumliche Ordnung in Frage stellen kann und ob die Critical Mass als performative Kritik der normativen Ordnung im Sinne Judith Butlers verstanden werden kann.

  4. Quasiparticle mass enhancement close to the quantum critical point in BaFe2(As(1-x)P(x))2.

    Science.gov (United States)

    Walmsley, P; Putzke, C; Malone, L; Guillamón, I; Vignolles, D; Proust, C; Badoux, S; Coldea, A I; Watson, M D; Kasahara, S; Mizukami, Y; Shibauchi, T; Matsuda, Y; Carrington, A

    2013-06-21

    We report a combined study of the specific heat and de Haas-van Alphen effect in the iron-pnictide superconductor BaFe2(As(1-x)P(x))2. Our data when combined with results for the magnetic penetration depth give compelling evidence for the existence of a quantum critical point close to x=0.30 which affects the majority of the Fermi surface by enhancing the quasiparticle mass. The results show that the sharp peak in the inverse superfluid density seen in this system results from a strong increase in the quasiparticle mass at the quantum critical point.

  5. Chapter 7. Critical care triage. Recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza epidemic or mass disaster

    NARCIS (Netherlands)

    Christian, Michael D.; Joynt, Gavin M.; Hick, John L.; Colvin, John; Danis, Marion; Sprung, Charles L.; Christian, Micahel D.; Camargo, Ruben; Ceraso, Daniel; Azoulay, Elie; Duguet, Alexandre; Guery, Benoit; Reinhart, Konrad; Adini, Bruria; Barlavie, Yaron; Benin-Goren, Odeda; Cohen, Robert; Klein, Motti; Leoniv, Yuval; Margalit, Gila; Rubinovitch, Bina; Sonnenblick, Moshe; Steinberg, Avraham; Weissman, Charles; Wolff, Donna; Kesecioglu, Jozef; de Jong, Menno; Moreno, Rui; An, Youzhong; Du, Bin; Loo, Shi; Richards, Guy; Artigas, Antonio; Pugin, Jerome; Amundson, Dennis; Devereaux, Asha; Beigel, John; Farmer, Chris; Maki, Dennis; Masur, Henry; Rubinson, Lewis; Sandrock, Christian; Talmor, Daniel; Truog, Robert; Zimmerman, Janice; Brett, Steve; Montgomery, Hugh; Rhodes, Andrew; Sanderson, Frances; Taylor, Bruce

    2010-01-01

    To provide recommendations and standard operating procedures for intensive care unit (ICU) and hospital preparations for an influenza pandemic or mass disaster with a specific focus on critical care triage. Based on a literature review and expert opinion, a Delphi process was used to define the

  6. Critical mass flux for flaming ignition of dead, dry wood as a function of external radiant heat flux and oxidizer flow velocity

    Science.gov (United States)

    Sara McAllister; Mark Finney; Jack Cohen

    2010-01-01

    Extreme weather often contributes to crown fires, where the fire spreads from one tree crown to the next as a series of piloted ignitions. An important aspect in predicting crown fires is understanding the ignition of fuel particles. The ignition criterion considered in this work is the critical mass flux criterion – that a sufficient amount of pyrolysis gases must be...

  7. Augmented marked graphs

    CERN Document Server

    Cheung, King Sing

    2014-01-01

    Petri nets are a formal and theoretically rich model for the modelling and analysis of systems. A subclass of Petri nets, augmented marked graphs possess a structure that is especially desirable for the modelling and analysis of systems with concurrent processes and shared resources.This monograph consists of three parts: Part I provides the conceptual background for readers who have no prior knowledge on Petri nets; Part II elaborates the theory of augmented marked graphs; finally, Part III discusses the application to system integration. The book is suitable as a first self-contained volume

  8. Augmented reality som wearable

    DEFF Research Database (Denmark)

    Buhl, Mie; Rahn, Annette

    2015-01-01

    Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR-applikat......Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR...

  9. Prototyping Augmented Reality

    CERN Document Server

    Mullen, Tony

    2011-01-01

    Learn to create augmented reality apps using Processing open-source programming language Augmented reality (AR) is used all over, and you may not even realize it. Smartphones overlay data onto live camera views to show homes for sale, restaurants, or historical sites. American football broadcasts use AR to show the invisible first-down line on the field to TV viewers. Nike and Budweiser, among others, have used AR in ads. Now, you can learn to create AR prototypes using 3D data, Processing open-source programming language, and other languages. This unique book is an easy-to-follow guide on how

  10. Preparation and study of the critical-mass-free plutonium ceramics with neutron poisons Hf, Gd and Li

    International Nuclear Information System (INIS)

    Timoefeeva, L.F.; Orlov, V.K.; Malyukov, E.E.; Molomin, V.I.; Zhmak, V.A.; Semova, E.A.; Shishkov, N.V.; Nadykto, B.A.

    2002-01-01

    Powder sintering was used to produce homogeneous type oxide ceramics of Pu with Hf, Gd and Li 6 . In all the ceramics, there is the number of neutron poison (Hf, Gd and Li) atoms per plutonium atom needed, according to the physical calculation, for them to be free of critical mass. PuO 2 stabilizers high-temperature modifications of cubic HfO 2 or hexagonal Gd 2 O 3 , however, at the ratio given by the physical calculation, the plutonium is insufficient for their full stabilization. Addition of yttrium oxide as an additive stabilizing the fcc phase of HfO 2 resulted in cubic solid solution (Pu, Hf, Y)O 2-x . Pu/Li/Hf and Pu/Li/Si ceramics produced by sintering of PuO 2 and compound Li 2 HfO 3 or 6 Li 4 SiO 4 powders is characterized with presence of two phases. The method of differential thermal analysis demonstrated the phase stability of (Pu-Hf, Pu-Gd, Pu-Li-Hf) oxide ceramics in the 20-1500degC temperature range. Ceramic (Pu/Li/Si) has several endothermal effects. Tests in boiling water solutions of various composition suggest that the specimens of Pu, Hf oxides and ternary oxides (Pu, Hf, Y)O 2 are less stable in weakly acidic media than in weakly alkaline medium and distilled water. The obtained results were used as a basis to estimate the assumed solid solution region boundaries for binary Hf, Pu and ternary Hf, Pu, Y oxides on the side of HfO 2 . (author)

  11. Towards Pervasive Augmented Reality: Context-Awareness in Augmented Reality.

    Science.gov (United States)

    Grubert, Jens; Langlotz, Tobias; Zollmann, Stefanie; Regenbrecht, Holger

    2017-06-01

    Augmented Reality is a technique that enables users to interact with their physical environment through the overlay of digital information. While being researched for decades, more recently, Augmented Reality moved out of the research labs and into the field. While most of the applications are used sporadically and for one particular task only, current and future scenarios will provide a continuous and multi-purpose user experience. Therefore, in this paper, we present the concept of Pervasive Augmented Reality, aiming to provide such an experience by sensing the user's current context and adapting the AR system based on the changing requirements and constraints. We present a taxonomy for Pervasive Augmented Reality and context-aware Augmented Reality, which classifies context sources and context targets relevant for implementing such a context-aware, continuous Augmented Reality experience. We further summarize existing approaches that contribute towards Pervasive Augmented Reality. Based our taxonomy and survey, we identify challenges for future research directions in Pervasive Augmented Reality.

  12. Maxillary Sinus Floor Augmentation

    DEFF Research Database (Denmark)

    Starch-Jensen, Thomas; Jensen, Janek Dalsgaard

    2017-01-01

    , radiological and histomorphometric outcome as well as complications are presented after maxillary sinus floor augmentation applying the lateral window technique with a graft material, maxillary sinus membrane elevation without a graft material and osteotome-mediated sinus floor elevation with or without...

  13. Augmented Reality og kulturarv

    DEFF Research Database (Denmark)

    Nielsen, Mikkel Kirkedahl Lysholm

    2013-01-01

    Museerne står overfor at skulle omfavne den digitale kultur i håndteringen af den store mængde viden, institutionerne repræsenterer. Augmented Reality-systemer forbinder ved hjælp af moderne teknologi det virtuelle med det virkelige, og kan derfor synes som en oplagt anvendelsesmulighed i...

  14. Augmented Reality i naturfagsundervisningen

    DEFF Research Database (Denmark)

    Radmer, Ole; Surland, Mogens; Nielsen, Birgitte Lund

    Augmented Reality (AR) giver ny mulighed for, at elever kan lave undersøgelser i naturfag med enkel teknologi, hvor animationer og simulationer kobles med det virkelige fænomen. I workshoppen kan I afprøve AR eksempler, udviklet i et internationalt EU projekt. Der vil være noget, der direkte kan...

  15. Collaboration in Augmented Reality

    NARCIS (Netherlands)

    Lukosch, S.; Billinghurst, M.; Alem, L.; Kiyokawa, K.

    2015-01-01

    Augmented Reality (AR) is a technology that allows users to view and interact in real time with virtual images seamlessly superimposed over the real world. AR systems can be used to create unique collaborative experiences. For example, co-located users can see shared 3D virtual objects that they

  16. The Dual Role of Vegetation as a Constraint on Mass and Energy Flux into the Critical Zone and as an Emergent Property of Geophysical Critical Zone Structure

    Science.gov (United States)

    Brooks, P. D.; Swetnam, T. L.; Barnard, H. R.; Singha, K.; Harpold, A.; Litvak, M. E.

    2017-12-01

    Spatial patterns in vegetation long have been used to scale both landsurface-atmosphere exchanges of water and carbon as well as to infer subsurface structure. These pursuits typical proceed in isolation and rarely do inferences gained from one community propagate to related efforts in another. Perhaps more importantly, vegetation often is treated as an emergent property of landscape-climate interactions rather than an active modifier of both critical zone structure and energy fluxes. We posit that vegetation structure and activity are under utilized as a tool towards understanding landscape evolution and present examples that begin to disentangle the role of vegetation as both an emergent property and an active control on critical zone structure and function. As climate change, population growth, and land use changes threaten water resources worldwide, the need for the new insights vegetation can provide becomes not just a basic science priority, but a pressing applied science question with clear societal importance. This presentation will provide an overview of recent efforts to address the dual role of vegetation in both modifying and reflecting critical zone structure in the western North American forests. For example, interactions between topography and stand scale vegetation structure influence both solar radiation and turbulence altering landscape scale partitioning of evaporation vs transpiration with major impacts of surface water supply. Similarly, interactions between topographic shading, lateral redistribution of plant available water, and subsurface storage create a mosaic of drought resistance and resilience across complex terrain. These complex interactions between geophysical and vegetation components of critical zone structure result in predictable patterns in catchment scale hydrologic partitioning within individual watersheds while simultaneously suggesting testable hypotheses for why catchments under similar climate regimes respond so

  17. Capillary Refill using Augmented Reality

    OpenAIRE

    Clausen, Christoffer

    2017-01-01

    Master's thesis in Computer science The opportunities within augmented reality is growing. Augmented reality is a combination of the real and the virtual world in real time, and large companies like Microsoft and Google is now investing heavily in the technology. This thesis presents a solution for simulating a medical test called capillary refill, by using augmented reality. The simulation is performed with an augmented reality headset called HoloLens. The HoloLens will recognise a mark...

  18. AR DOC: Augmented reality documentaries

    DEFF Research Database (Denmark)

    Vistisen, Peter

    2014-01-01

    Augmented Reality Documentaries (AR DOC) er et ’lille’ Shareplay projekt (ansøgte midler augmented reality cross media løsninger, til at skabe engagerende publikumsformidling...... indenfor oplevelsesindustrien. Projektet har genereret ny viden omkring, hvordan fysisk og digital formidling kan understøttes via Augmented Reality som formidlingsformat....

  19. Mass balance approaches to assess critical loads and target loads of heavy metals for terrestrial and aquatic ecosystems

    NARCIS (Netherlands)

    Vries, de W.; Groenenberg, J.E.; Posch, M.

    2015-01-01

    Critical loads of heavy metals address not only ecotoxicological effects on organisms in soils and surface waters, but also food quality in view of public health. A critical load for metals is the load resulting at steady state in a metal concentration in a compartment (e.g. soil solution, surface

  20. Transaxillary Endoscopic Breast Augmentation

    Directory of Open Access Journals (Sweden)

    Hyung-Bo Sim

    2014-09-01

    Full Text Available The axillary technique is the most popular approach to breast augmentation among Korean women. Transaxillary breast augmentation is now conducted with sharp electrocautery dissection under direct endoscopic vision throughout the entire process. The aims of this method are clear: both a bloodless pocket and a sharp non-traumatic dissection. Round textured or anatomical cohesive gel implants have been used to make predictable well-defined inframammary creases because textured surface implants demonstrated a better stability attributable to tissue adherence compared with smooth surface implants. The axillary endoscopic technique has greatly evolved, and now the surgical results are comparable to those with the inframammary approach. The author feels that this technique is an excellent choice for young patients with an indistinct or absent inframammary fold, who do not want a scar in the aesthetic unit of their chest.

  1. Autologous Fat Injection for Augmented Mammoplasty

    International Nuclear Information System (INIS)

    Yoon, Eul Sik; Seo, Bo Kyoung; Yi, Ann; Cho, Kyu Ran

    2008-01-01

    Autologous fat injection is one of the methods utilized for augmented mammoplasty methods. In this surgical procedure, the fat for transfer is obtained from the donor site of the patient's own body by liposuction and the fat is then injected into the breast. We report here cases of three patients who underwent autologous fat injection. Two of the patients had palpable masses that were present after surgery. The serial imaging findings and surgical method of autologous fat transfer are demonstrated

  2. Augmented reality in surgery.

    Science.gov (United States)

    Shuhaiber, Jeffrey H

    2004-02-01

    To evaluate the history and current knowledge of computer-augmented reality in the field of surgery and its potential goals in education, surgeon training, and patient treatment. National Library of Medicine's database and additional library searches. Only articles suited to surgical sciences with a well-defined aim of study, methodology, and precise description of outcome were included. Augmented reality is an effective tool in executing surgical procedures requiring low-performance surgical dexterity; it remains a science determined mainly by stereotactic registration and ergonomics. Strong evidence was found that it is an effective teaching tool for training residents. Weaker evidence was found to suggest a significant influence on surgical outcome, both morbidity and mortality. No evidence of cost-effectiveness was found. Augmented reality is a new approach in executing detailed surgical operations. Although its application is in a preliminary stage, further research is needed to evaluate its long-term clinical impact on patients, surgeons, and hospital administrators. Its widespread use and the universal transfer of such technology remains limited until there is a better understanding of registration and ergonomics.

  3. Augmented reality services

    Directory of Open Access Journals (Sweden)

    Tomáš Koubek

    2013-01-01

    Full Text Available We assume that one of the key reasons is in the difference between a standalone application and a web service. Both architectures have some advantages and disadvantages. The Standalone application (e.g. Nokia/OVI Maps provides the required functionality. From the user point of view, main asset of this “offline” approach is network connectivity independence. However, this kind of applications must be upgraded manually. Moreover, it is hard to get any data about the application usage because it requires additional actions from the user – data are usually acquired through conventional ways, such as email or web forms.The online service such as Google Maps (including its mobile application can offer the same functionality as the offline application. Nevertheless, a permanent connection to provider servers is necessary. This can be taken as a drawback. On the other hand, usage data collection is easier and can be done without the user intervention. The data collection provides a valuable analysis basis of the user habits and needs. This analysis is necessary for design of a complex “user” based solutions such as Google Now.Augmented reality applications are usually based on the first mentioned approach. In this article, we describe our model of augmented reality as a service and compare its features with standalone solutions. Further, other important key aspects for large emergence of augmented reality services in a mainstream market are discussed.

  4. Critical and subcritical mass calculations of curium-243 to -247 based on JENDL-3.2 for revision of ANSI/ANS-8.15

    International Nuclear Information System (INIS)

    Okuno, Hiroshi

    2002-01-01

    Critical and subcritical masses were calculated for a sphere of five curium isotopes from 243 Cm to 247 Cm in metal and in metal-water mixtures considering three reflector conditions: bare, with a water reflector or a stainless steel reflector. The calculation were made mainly with a combination of a continuous energy Monte Carlo neutron transport calculation code, MCNP, and the Japanese Evaluated Nuclear Data Library, JENDL-3.2. Other evaluated nuclear data files, ENDF/B-VI and JEF-2.2, were also applied to find differences in calculation results of the neutron multiplication factor originated from different nuclear data files. A large dependence on the evaluated nuclear data files was found in the calculation results: more than 10%Δk/k relative differences in the neutron multiplication factor for a homogeneous mixture of 243 Cm metal and water when JENDL-3.2 was replaced with ENDF/B-VI and JEF-2.2, respectively; and a 44% reduction in the critical mass by changing from JENDL-3.2 to ENDF/B-VI for 246 Cm metal. The present study supplied basic information to the ANSI/ANS-8.15 Working Group for revision of the standard for nuclear criticality control of special actinide elements. The new or revised values of the subcritical mass limits for curium isotopes accepted by the ANSI/ANS-8.15 Working Group were finally summarized. (author)

  5. Critical and subcritical mass calculations of curium-243 to -247 based on JENDL-3.2 for revision of ANSI/ANS-8.15

    Energy Technology Data Exchange (ETDEWEB)

    Okuno, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kawasaki, Hiromitsu [CRC Solutions Corporation, Hitachinaka, Ibaraki (Japan)

    2002-10-01

    Critical and subcritical masses were calculated for a sphere of five curium isotopes from {sup 243}Cm to {sup 247}Cm in metal and in metal-water mixtures considering three reflector conditions: bare, with a water reflector or a stainless steel reflector. The calculation were made mainly with a combination of a continuous energy Monte Carlo neutron transport calculation code, MCNP, and the Japanese Evaluated Nuclear Data Library, JENDL-3.2. Other evaluated nuclear data files, ENDF/B-VI and JEF-2.2, were also applied to find differences in calculation results of the neutron multiplication factor originated from different nuclear data files. A large dependence on the evaluated nuclear data files was found in the calculation results: more than 10%{delta}k/k relative differences in the neutron multiplication factor for a homogeneous mixture of {sup 243}Cm metal and water when JENDL-3.2 was replaced with ENDF/B-VI and JEF-2.2, respectively; and a 44% reduction in the critical mass by changing from JENDL-3.2 to ENDF/B-VI for {sup 246}Cm metal. The present study supplied basic information to the ANSI/ANS-8.15 Working Group for revision of the standard for nuclear criticality control of special actinide elements. The new or revised values of the subcritical mass limits for curium isotopes accepted by the ANSI/ANS-8.15 Working Group were finally summarized. (author)

  6. Human-Assisted AI: an Intelligence Augmentation Approach

    OpenAIRE

    Alicea, Bradly

    2018-01-01

    As a flavor of Human-Computer Interaction (HCI), Human-Assisted AI can serve to both augment both human performance and artificial systems. This talk will feature a discussion of Human-assisted AI as an instance of Intelligence Augmentation (IA). We will discuss instances of weak and strong IA, in addition to contemporary examples of and paths forward for such systems. In the variety of models presented, data plays a critical role in the structure of interactions between human and artificial ...

  7. AMI: Augmented Michelson Interferometer

    Science.gov (United States)

    Furió, David; Hachet, Martin; Guillet, Jean-Paul; Bousquet, Bruno; Fleck, Stéphanie; Reuter, Patrick; Canioni, Lionel

    2015-10-01

    Experiments in optics are essential for learning and understanding physical phenomena. The problem with these experiments is that they are generally time consuming for both their construction and their maintenance, potentially dangerous through the use of laser sources, and often expensive due to high technology optical components. We propose to simulate such experiments by way of hybrid systems that exploit both spatial augmented reality and tangible interaction. In particular, we focus on one of the most popular optical experiments: the Michelson interferometer. In our approach, we target a highly interactive system where students are able to interact in real time with the Augmented Michelson Interferometer (AMI) to observe, test hypotheses and then to enhance their comprehension. Compared to a fully digital simulation, we are investigating an approach that benefits from both physical and virtual elements, and where the students experiment by manipulating 3D-printed physical replicas of optical components (e.g. lenses and mirrors). Our objective is twofold. First, we want to ensure that the students will learn with our simulator the same concepts and skills that they learn with traditional methods. Second, we hypothesis that such a system opens new opportunities to teach optics in a way that was not possible before, by manipulating concepts beyond the limits of observable physical phenomena. To reach this goal, we have built a complementary team composed of experts in the field of optics, human-computer interaction, computer graphics, sensors and actuators, and education science.

  8. Mass Media and Consensus Politics: A Critical Evaluation of the Coverage of the 1980 Presidential Election Campaigns.

    Science.gov (United States)

    Self, Charles; Stovall, Jim

    Presidential candidates in the United States tend to seek consensus rather than to try to discover new answers to problems and to convince voters that they should be elected to implement those answers. Reporters in the mass media emphasize objectivity and fairness in their reporting. This emphasis produces an intense interest in the…

  9. Augmented Reality for Science Education

    DEFF Research Database (Denmark)

    Brandt, Harald; Nielsen, Birgitte Lund; Georgsen, Marianne

    Augmented reality (AR) holds great promise as a learning tool. So far, however, most research has looked at the technology itself – and AR has been used primarily for commercial purposes. As a learning tool, AR supports an inquiry-based approach to science education with a high level of student...... involvement. The AR-sci-project (Augmented Reality for SCIence education) addresses the issue of applying augmented reality in developing innovative science education and enhancing the quality of science teaching and learning....

  10. Crime Scenes as Augmented Reality

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    2010-01-01

    Using the concept of augmented reality, this article will investigate how places in various ways have become augmented by means of different mediatization strategies. Augmentation of reality implies an enhancement of the places' emotional character: a certain mood, atmosphere or narrative surplus......, physical damage: they are all readable and interpretable signs. As augmented reality the crime scene carries a narrative which at first is hidden and must be revealed. Due to the process of investigation and the detective's ability to reason and deduce, the crime scene as place is reconstructed as virtual...

  11. Current applications of high-resolution mass spectrometry for the analysis of new psychoactive substances: a critical review.

    Science.gov (United States)

    Pasin, Daniel; Cawley, Adam; Bidny, Sergei; Fu, Shanlin

    2017-10-01

    The proliferation of new psychoactive substances (NPS) in recent years has resulted in the development of numerous analytical methods for the detection and identification of known and unknown NPS derivatives. High-resolution mass spectrometry (HRMS) has been identified as the method of choice for broad screening of NPS in a wide range of analytical contexts because of its ability to measure accurate masses using data-independent acquisition (DIA) techniques. Additionally, it has shown promise for non-targeted screening strategies that have been developed in order to detect and identify novel analogues without the need for certified reference materials (CRMs) or comprehensive mass spectral libraries. This paper reviews the applications of HRMS for the analysis of NPS in forensic drug chemistry and analytical toxicology. It provides an overview of the sample preparation procedures in addition to data acquisition, instrumental analysis, and data processing techniques. Furthermore, it gives an overview of the current state of non-targeted screening strategies with discussion on future directions and perspectives of this technique. Graphical Abstract Missing the bullseye - a graphical respresentation of non-targeted screening. Image courtesy of Christian Alonzo.

  12. Storage of plutonium and nuclear power plant actinide waste in the form of critical-mass-free ceramics containing neutron poisons

    Energy Technology Data Exchange (ETDEWEB)

    Nadykto, B.A. [RFNC-VNIIEF, Nizhni Novgorod Region (Russian Federation)

    2001-07-01

    The nuclear weapons production has resulted in accumulation of a large quantity of plutonium and uranium highly enriched with uranium-235 isotope (many tons). The work under ISTC Project 332B-97 treated the issues of safe plutonium storage through making critical-mass-free plutonium oxide compositions with neutron poisons. This completely excludes immediate utilization (without chemical reprocessing) of retained plutonium in nuclear devices. It is therewith possible to locate plutonium most compactly in the storage facility, which would allow reduction in required storage areas and costs. The issues of the surplus weapon-grade plutonium management and utilization have been comprehensively studied in the recent decade. The issues are treated in multiple scientific publications, conferences, and seminars. At the same time, issues of nuclear power engineering actinide waste storage are studied no less extensively. The general issues are material radioactivity and energy release and nuclear accident hazards due to critical mass generation. Plutonium accumulated in nuclear power plant spent fuel is more accessible than weapon-grade plutonium and can become of higher and higher interest with time as its activity reduces, including as material for nuclear devices. The urgency of plutonium management is presently related not only to accumulation of surplus weapon-grade plutonium, but also to the fact that it is high time to decide what has to be done regarding reactor plutonium. Presently, the possibility of actinide separation from NPP spent nuclear fuel and compact underground burial separately from other (mainly fragment) activity is being considered. Actinide and neutron poison base critical-mass-free ceramic materials (similar to plutonium ceramics) may be useful for this burial method. (author)

  13. Storage of plutonium and nuclear power plant actinide waste in the form of critical-mass-free ceramics containing neutron poisons

    International Nuclear Information System (INIS)

    Nadykto, B.A.

    2001-01-01

    The nuclear weapons production has resulted in accumulation of a large quantity of plutonium and uranium highly enriched with uranium-235 isotope (many tons). The work under ISTC Project 332B-97 treated the issues of safe plutonium storage through making critical-mass-free plutonium oxide compositions with neutron poisons. This completely excludes immediate utilization (without chemical reprocessing) of retained plutonium in nuclear devices. It is therewith possible to locate plutonium most compactly in the storage facility, which would allow reduction in required storage areas and costs. The issues of the surplus weapon-grade plutonium management and utilization have been comprehensively studied in the recent decade. The issues are treated in multiple scientific publications, conferences, and seminars. At the same time, issues of nuclear power engineering actinide waste storage are studied no less extensively. The general issues are material radioactivity and energy release and nuclear accident hazards due to critical mass generation. Plutonium accumulated in nuclear power plant spent fuel is more accessible than weapon-grade plutonium and can become of higher and higher interest with time as its activity reduces, including as material for nuclear devices. The urgency of plutonium management is presently related not only to accumulation of surplus weapon-grade plutonium, but also to the fact that it is high time to decide what has to be done regarding reactor plutonium. Presently, the possibility of actinide separation from NPP spent nuclear fuel and compact underground burial separately from other (mainly fragment) activity is being considered. Actinide and neutron poison base critical-mass-free ceramic materials (similar to plutonium ceramics) may be useful for this burial method. (author)

  14. NASA Communications Augmentation network

    Science.gov (United States)

    Omidyar, Guy C.; Butler, Thomas E.; Laios, Straton C.

    1990-01-01

    The NASA Communications (Nascom) Division of the Mission Operations and Data Systems Directorate (MO&DSD) is to undertake a major initiative to develop the Nascom Augmentation (NAUG) network to achieve its long-range service objectives for operational data transport to support the Space Station Freedom Program, the Earth Observing System (EOS), and other projects. The NAUG is the Nascom ground communications network being developed to accommodate the operational traffic of the mid-1990s and beyond. The NAUG network development will be based on the Open Systems Interconnection Reference Model (OSI-RM). This paper describes the NAUG network architecture, subsystems, topology, and services; addresses issues of internetworking the Nascom network with other elements of the Space Station Information System (SSIS); discusses the operations environment. This paper also notes the areas of related research and presents the current conception of how the network will provide broadband services in 1998.

  15. Augmented fish health monitoring

    International Nuclear Information System (INIS)

    Michak, P.; Rogers, R.; Amos, K.

    1991-05-01

    The Bonneville Power Administration (BPA) initiated the Augmented Fish Health Monitoring project in 1986. This project was a five year interagency project involving fish rearing agencies in the Columbia Basin. Historically, all agencies involved with fish health in the Columbia Basin were conducting various levels of fish health monitoring, pathogen screening and collection. The goals of this project were; to identify, develop and implement a standardized level of fish health methodologies, develop a common data collection and reporting format in the area of artificial production, evaluate and monitor water quality, improve communications between agencies and provide annual evaluation of fish health information for production of healthier smolts. This completion report will contain a project evaluation, review of the goals of the project, evaluation of the specific fish health analyses, an overview of highlights of the project and concluding remarks. 8 refs., 1 fig., 4 tabs

  16. Augmented Virtual Reality Laboratory

    Science.gov (United States)

    Tully-Hanson, Benjamin

    2015-01-01

    Real time motion tracking hardware has for the most part been cost prohibitive for research to regularly take place until recently. With the release of the Microsoft Kinect in November 2010, researchers now have access to a device that for a few hundred dollars is capable of providing redgreenblue (RGB), depth, and skeleton data. It is also capable of tracking multiple people in real time. For its original intended purposes, i.e. gaming, being used with the Xbox 360 and eventually Xbox One, it performs quite well. However, researchers soon found that although the sensor is versatile, it has limitations in real world applications. I was brought aboard this summer by William Little in the Augmented Virtual Reality (AVR) Lab at Kennedy Space Center to find solutions to these limitations.

  17. Augmented reality system

    Science.gov (United States)

    Lin, Chien-Liang; Su, Yu-Zheng; Hung, Min-Wei; Huang, Kuo-Cheng

    2010-08-01

    In recent years, Augmented Reality (AR)[1][2][3] is very popular in universities and research organizations. The AR technology has been widely used in Virtual Reality (VR) fields, such as sophisticated weapons, flight vehicle development, data model visualization, virtual training, entertainment and arts. AR has characteristics to enhance the display output as a real environment with specific user interactive functions or specific object recognitions. It can be use in medical treatment, anatomy training, precision instrument casting, warplane guidance, engineering and distance robot control. AR has a lot of vantages than VR. This system developed combines sensors, software and imaging algorithms to make users feel real, actual and existing. Imaging algorithms include gray level method, image binarization method, and white balance method in order to make accurate image recognition and overcome the effects of light.

  18. Maxillary sinus augmentation

    Directory of Open Access Journals (Sweden)

    A B Tarun Kumar

    2015-01-01

    Full Text Available Placing dental implants in the maxillary posterior region can be both challenging and un-nerving for a regular implant dentist who is not well versed with advanced surgical procedures. It is vital for a general dentist to understand the fundamentals of bone grafting the maxillary sinus if he/she is really committed to providing the best health care for their patients. The dental practice is seeing an increasing group of patients who are living longer, and this group of older baby boomers often has an edentulous posterior maxilla either unilateral or bilateral. When edentulous, the posterior maxilla more likely has diminished bone height, which does not allow for the placement of dental implants without creating additional bone. Through grafting the maxillary sinus, bone of ideal quality can be created (allowing for placement of dental implants, which offer many advantages over other tooth replacement modalities. The sinus graft offers the dental patient a predictable procedure of regenerating lost osseous structure in the posterior maxilla. This offers the patient many advantages for long-term success. If dentists understand these concepts, they can better educate their patients and guide them to have the procedure performed. This article outlines bone grafting of the maxillary sinus for the purpose of placing dental implants. This review will help the readers to understand the intricacies of sinus augmentation. They can relate their patient's condition with the available literature and chalk out the best treatment plan for the patient, especially by using indirect sinus augmentation procedures which are less invasive and highly successful if done using prescribed technique.

  19. Prader-Willi Critical Region, a Non-Translated, Imprinted Central Regulator of Bone Mass: Possible Role in Skeletal Abnormalities in Prader-Willi Syndrome.

    Directory of Open Access Journals (Sweden)

    Ee-Cheng Khor

    Full Text Available Prader-Willi Syndrome (PWS, a maternally imprinted disorder and leading cause of obesity, is characterised by insatiable appetite, poor muscle development, cognitive impairment, endocrine disturbance, short stature and osteoporosis. A number of causative loci have been located within the imprinted Prader-Willi Critical Region (PWCR, including a set of small non-translated nucleolar RNA's (snoRNA. Recently, micro-deletions in humans identified the snoRNA Snord116 as a critical contributor to the development of PWS exhibiting many of the classical symptoms of PWS. Here we show that loss of the PWCR which includes Snord116 in mice leads to a reduced bone mass phenotype, similar to that observed in humans. Consistent with reduced stature in PWS, PWCR KO mice showed delayed skeletal development, with shorter femurs and vertebrae, reduced bone size and mass in both sexes. The reduction in bone mass in PWCR KO mice was associated with deficiencies in cortical bone volume and cortical mineral apposition rate, with no change in cancellous bone. Importantly, while the length difference was corrected in aged mice, consistent with continued growth in rodents, reduced cortical bone formation was still evident, indicating continued osteoblastic suppression by loss of PWCR expression in skeletally mature mice. Interestingly, deletion of this region included deletion of the exclusively brain expressed Snord116 cluster and resulted in an upregulation in expression of both NPY and POMC mRNA in the arcuate nucleus. Importantly, the selective deletion of the PWCR only in NPY expressing neurons replicated the bone phenotype of PWCR KO mice. Taken together, PWCR deletion in mice, and specifically in NPY neurons, recapitulates the short stature and low BMD and aspects of the hormonal imbalance of PWS individuals. Moreover, it demonstrates for the first time, that a region encoding non-translated RNAs, expressed solely within the brain, can regulate bone mass in health

  20. On the curve of critical exponents for nonlinear elliptic problems in the case of a zero mass

    Science.gov (United States)

    Il'yasov, Ya. Sh.

    2017-03-01

    For semilinear elliptic equations -Δ u = λ| u| p-2 u-| u| q-2 u, boundary value problems in bounded and unbounded domains are considered. In the plane of exponents p × q, the so-called curves of critical exponents are defined that divide this plane into domains with qualitatively different properties of the boundary value problems and the corresponding parabolic equations. New solvability conditions for boundary value problems, conditions for the stability and instability of stationary solutions, and conditions for the existence of global solutions to parabolic equations are found.

  1. Advanced Intellect-Augmentation Techniques.

    Science.gov (United States)

    Engelbart, D. C.

    This progress report covers a two-year project which is part of a program that is exploring the value of computer aids in augmenting human intellectual capability. The background and nature of the program, its resources, and the activities it has undertaken are outlined. User experience in applying augmentation tools and techniques to various…

  2. Augmented Reality Comes to Physics

    Science.gov (United States)

    Buesing, Mark; Cook, Michael

    2013-01-01

    Augmented reality (AR) is a technology used on computing devices where processor-generated graphics are rendered over real objects to enhance the sensory experience in real time. In other words, what you are really seeing is augmented by the computer. Many AR games already exist for systems such as Kinect and Nintendo 3DS and mobile apps, such as…

  3. Augmented reality som wearable technology

    DEFF Research Database (Denmark)

    Rahn, Annette

    “How Augmented reality can facilitate learning in visualizing human anatomy “ At this station I demonstrate how Augmented reality can be used to visualize the human lungs in situ and as a wearable technology which establish connection between body, image and technology in education. I will show...

  4. Women and mass media: a critical and analytical study of the portrayal of Sudanese women in printed media.

    Science.gov (United States)

    Badri, A E; Osama, S

    1995-06-01

    This study examines how Sudanese women are portrayed in the mass media. Data are obtained from a content analysis of historical records of Sudanese daily newspapers and women's magazines and from surveys among female editors in print media. The following types of newspapers are reviewed: independent newspapers; papers for the Al-Umma Party, a communist party, a Bathist party, a Muslim Nationalist Islamic Front Party, and a National Union Democratic Party; and a current military government paper. Women's magazines are published by women. Articles focus on women as the main newsmakers, women's life issues, female authors, a female focus but a male author, and famous Sudanese women. 16 content themes are identified. Women were not extensively featured or photographed in either newspapers or magazines. The Al-Umma Party paper and Al-Sudan Al-Hadith paper (an independent paper) were the only two newspapers with at least 10 photos of women. Women were pictured as professionals, educated persons, and leaders. There were 17 female editors. These editors preferred an image of women as leaders, followed by productive workers. Only 11.76% believed that women's dual roles as producers and reproducers should be portrayed. Female editors did not want a special women's page. 52.94% (the largest percentage) preferred targeting women with substantial leadership abilities. 17.65% desired the portrayal of women as workers and housewives. 58.82% did not think that the mass media image changed behavior or attitudes, because most Sudanese women are illiterate. Women's issues in both newspapers and women's magazines were devoted to women's work, achievements, and needs. The authors recommend removal of obstacles to women's equal participation in the mass media and press and research on the effect of media images on women's self-perception and behavior.

  5. A critical review of inductively coupled plasma-mass spectrometry for geoanalysis, geochemistry and hydrology, Part 1. Analytical performance

    Science.gov (United States)

    Brenner, I.B.; Taylor, Howard E.

    1992-01-01

    Present-day inductively coupled plasma-mass spectrometry (ICP-MS) instrumentation is described briefly. Emphasis is placed on performance characteristics for geoanalysis, geochemistry, and hydrology. Applications where ICP-MS would be indispensable are indicated. Determination of geochemically diagnostic trace elements (such as the rare earth elements [REE], U and Th), of isotope ratios for fingerprinting, tracer and other geo-isotope applications, and benchmark isotope dilution determinations are considered to be typical priority applications for ICP-MS. It is concluded that ICP-MS furnishes unique geoanalytical and environmental data that are not readily provided by conventional spectroscopic (emission and absorption) techniques.

  6. The Impact of a Mild Sub-Critical Hydrothermal Carbonization Pretreatment on Umbila Wood. A Mass and Energy Balance Perspective

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Cuvilas

    2015-03-01

    Full Text Available Over the last years, the pretreatment of biomass as a source of energy has become one of the most important steps of biomass conversion. In this work the effect of a mild subcritical hydrothermal carbonization of a tropical woody biomass was studied. Results indicate considerable change in carbon content from 52.78% to 65.1%, reduction of oxygen content from 41.14% to 28.72% and ash slagging and fouling potential. Even though decarboxylation, decarbonylation and dehydration reactions take place, dehydration is the one that prevails. The mass and energy balance was affected by the treatment conditions than the severity of the treatment.

  7. A theoretical critical heat flux model for low-pressure, low-mass-flux, and low-steam quality conditions

    International Nuclear Information System (INIS)

    Weihsiao Ho; Kuanchywan Tu; Baushei Pei; Chinjang Chang

    1993-01-01

    The critical heat flux (CHF) is the maximum heat flux just before a boiling crisis; its importance as a measurement of nuclear reactor power capability design as well as in the safety of reactors has been recognized. With emphasis on CHF behavior under subcooled and low-quality (i.e., 2 ·s), an improved model that uses the sublayer dry out theory has been developed. Based on experimental observations of CHF, the model assumes that CHF under such conditions is of the departure from nucleate boiling type. Based on the postulation that CHF is triggered by Helmholtz instability in the sublayer steam-liquid system, the model was developed by a simple energy balance of liquid sublayer evaporation as the vapor blanket tends to disturb the balance between the buoyancy force and the drag force exerted upon it. The model is compared with the well-known Biasi et al. correlation as well as the Atomic Energy of Canada Limited lookup table against 102 uniformly heated round tube CHF data and 34 nonuniformly heated round tube CHF data. The comparison shows that the model provides better accuracy and a reasonable agreement between the predicted values and experimental CHF data

  8. To the question of definition of fissile material mass and neutron multiplication in deep sub-critical systems

    International Nuclear Information System (INIS)

    Dulin, V.V.

    2006-01-01

    A method of determination neutrons multiplication in deep sub-critical multiplying media has been developed. It is based on a modified of Rossi - alpha method. It will consist in use of integral on time (a method of the areas) from correlated parts of distribution and integral in area, independent of time a part of distribution (area of a constant background). It allows to spend the calculated analysis, using the integrated equation on time for a neutrons flux and to not use representation of point kinetic model. A calculation spatially-correlation factor the adjoint (relative the detector count rate) inhomogeneous equation is used. Its calculation takes into account fission both in multiplying media and in a spontaneous neutron source. Measurements with plutonium-steel and uranium-steel blocks, and blocks from uranium and plutonium dioxide of different enrichment are have been carried out. The measured values of neutrons multiplication in a range 1.03-1.82 will be well coordinated to results of calculations. The question on an opportunity of definition of weight of the measured blocks of fissile material is considered [ru

  9. Phenobarbital Augments Hypothermic Neuroprotection

    Science.gov (United States)

    Barks, John D.; Liu, Yi-Qing; Shangguan, Yu; Silverstein, Faye S.

    2010-01-01

    Seizures are associated with adverse outcome in infants with hypoxic-ischemic encephalopathy. We hypothesized that early administration of the anticonvulsant phenobarbital after cerebral hypoxia-ischemia could enhance the neuroprotective efficacy of delayed-onset hypothermia. We tested this hypothesis in a neonatal rodent model. Seven-day-old rats (n=104) underwent right carotid ligation, followed by 90 min 8%O2 exposure; 15 min later, they received injections of phenobarbital (40 mg/kg) or saline. One or 3h later, all were treated with hypothermia (30°C, 3h). Function and neuropathology were evaluated after 7 days (“early outcomes”) or 1 month (“late outcomes”). Early outcome assessment demonstrated better sensorimotor performance and less cortical damage in phenobarbital-treated groups; there were no differences between groups in which the hypothermia delay was shortened from 3h to 1h. Late outcome assessment confirmed sustained benefits of phenobarbital+hypothermia treatment; sensorimotor performance was better (persistent attenuation of contralateral forepaw placing deficits and absence of contralateral forepaw neglect); neuropathology scores were lower (medians, phenobarbital 2, saline 8.5, pphenobarbital may augment the neuroprotective efficacy of therapeutic hypothermia. PMID:20098339

  10. Critical evaluation of analytical performance of atomic absorption spectrometry and inductively coupled plasma mass spectrometry for mercury determination

    International Nuclear Information System (INIS)

    Krata, A.; Bulska, E.

    2005-01-01

    The analytical performance of cold vapor atomic absorption spectrometry (CV AAS), graphite furnace atomic absorption spectrometry (GF AAS) and inductively coupled plasma mass spectrometry (ICP-MS) for mercury determination have been investigated with the use of two reference materials SRM 2710 Montana I Soil and BCR-144R (sewage sludge from domestic origin). The digestion conditions and their influence on determination of mercury have been studied. Samples were decomposed by microwave digestion in closed vessels with the use of HCl alone or mixture of HCl+HNO 3 +HF. The digestion solutions were analyzed by CV AAS using NaBH 4 as a reducing agent, by GF AAS with Pd or mixture of Pd/Rh as modifiers and by ICP-MS with Rh as internal standard. In the case of CV AAS, results were not dependent on digestion conditions. In the case of GF AAS and ICP-MS, results depended significantly on digestion conditions; in both cases, the use of the mixture of acids as defined above suppressed the signal of mercury. Therefore, in those cases, the microwave digestion with HCl is recommended. Detection limits of 0.003, 0.01 and 0.2 μg g -1 were achieved by ICP-MS, CV AAS and GF AAS, respectively

  11. Critical assessment of ionization patterns and applications of ambient desorption/ionization mass spectrometry using FAPA-MS.

    Science.gov (United States)

    Brüggemann, Martin; Karu, Einar; Hoffmann, Thorsten

    2016-02-01

    Ambient desorption/ionization mass spectrometry (MS) has gained growing interest during the last decade due to its high analytical performance and yet simplicity. Here, one of the recently developed ambient desorption/ionization MS sources, the flowing atmospheric-pressure afterglow (FAPA) source, was investigated in detail regarding background ions and typical ionization patterns in the positive as well as the negative ion mode for a variety of compound classes, comprising alkanes, alcohols, aldehydes, ketones, carboxylic acids, organic peroxides and alkaloids. A broad range of signals for adducts and losses was found, besides the usually emphasized detection of quasimolecular ions, i.e. [M + H](+) and [M - H](-) in the positive and the negative mode, respectively. It was found that FAPA-MS is best suited for polar analytes containing nitrogen and/or oxygen functionalities, e.g. carboxylic acids, with low molecular weights and relatively high vapor pressures. In addition, the source was used in proof-of-principle studies, illustrating the capabilities and limitations of the technique: Firstly, traces of cocaine were detected and unambiguously identified on euro banknotes using FAPA ionization in combination with tandem MS, suggesting a correlation between cocaine abundance and age of the banknote. Secondly, FAPA-MS was used for the identification of acidic marker compounds in organic aerosol samples, indicating yet-undiscovered matrix and sample surface effects of ionization pathways in the afterglow region. Copyright © 2016 John Wiley & Sons, Ltd.

  12. Augmented Mirror: Interactive Augmented Reality System Based on Kinect

    OpenAIRE

    Vera , Lucía; Gimeno , Jesús; Coma , Inmaculada; Fernández , Marcos

    2011-01-01

    Part 1: Long and Short Papers; International audience; In this paper we present a virtual character controlled by an actor in real time, who talks with an audience through an augmented mirror. The application, which integrates video images, the avatar and other virtual objects within an Augmented Reality system, has been implemented using a mixture of technologies: two kinect systems for motion capture, depth map and real images, a gyroscope to detect head movements, and control algorithms to...

  13. Parallel path nebulizer: Critical parameters for use with microseparation techniques combined with inductively coupled plasma mass spectrometry

    International Nuclear Information System (INIS)

    Yanes, Enrique G.; Miller-Ihli, Nancy J.

    2005-01-01

    Four different, low flow parallel path Mira Mist CE nebulizers were evaluated and compared in support of an ongoing project related to the use of microseparation techniques interfaced to inductively coupled plasma mass spectrometry for the quantification of cobalamin species (Vitamin B12). For the characterization of the different Mira Mist CE nebulizers, the nebulizer orientation as well as the effect of methanol on analytical response was the focus of the study. The position of the gas outlet on the nebulizer which consistently provided the maximum signal was when it was rotated to the 11 o'clock position when the nebulizer is viewed end-on. With this orientation the increased signal may be explained by the fact that the cone angle of the aerosol is such that the largest percentage of the aerosol is directed to the center of the spray chamber and consequently into the plasma. To characterize the nebulizer's performance, the signal response of a multielement solution containing elements with a variety of ionization potentials was used. The selection of elements with varying ionization energies and degrees of ionization was essential for a better understanding of observed increases in signal enhancement when methanol was used. Two different phenomena contribute to signal enhancement when using methanol: the first is improved transport efficiency and the second is the 'carbon enhancement effect'. The net result was that as much as a 30-fold increase in signal was observed for As and Mg when using a make-up solution of 20% methanol at a 15 μL/min flow rate which is equivalent to a net volume of 3 μL/min of pure methanol

  14. Criticality safety

    International Nuclear Information System (INIS)

    Walker, G.

    1983-01-01

    When a sufficient quantity of fissile material is brought together a self-sustaining neutron chain reaction will be started in it and will continue until some change occurs in the fissile material to stop the chain reaction. The quantity of fissile material required is the 'Critical Mass'. This is not a fixed quantity even for a given type of fissile material but varies between quite wide limits depending on a number of factors. In a nuclear reactor the critical mass of fissile material is assembled under well-defined condition to produce a controllable chain reaction. The same materials have to be handled outside the reactor in all stages of fuel element manufacture, storage, transport and irradiated fuel reprocessing. At any stage it is possible (at least in principle) to assemble a critical mass and thus initiate an accidental and uncontrollable chain reaction. Avoiding this is what criticality safety is all about. A system is just critical when the rate of production of neutrons balances the rate of loss either by escape or by absorption. The factors affecting criticality are, therefore, those which effect neutron production and loss. The principal ones are:- type of nuclide and enrichment (or isotopic composition), moderation, reflection, concentration (density), shape and interaction. Each factor is considered in detail. (author)

  15. Mersiline mesh in premaxillary augmentation.

    Science.gov (United States)

    Foda, Hossam M T

    2005-01-01

    Premaxillary retrusion may distort the aesthetic appearance of the columella, lip, and nasal tip. This defect is characteristically seen in, but not limited to, patients with cleft lip nasal deformity. This study investigated 60 patients presenting with premaxillary deficiencies in which Mersiline mesh was used to augment the premaxilla. All the cases had surgery using the external rhinoplasty technique. Two methods of augmentation with Mersiline mesh were used: the Mersiline roll technique, for the cases with central symmetric deficiencies, and the Mersiline packing technique, for the cases with asymmetric deficiencies. Premaxillary augmentation with Mersiline mesh proved to be simple technically, easy to perform, and not associated with any complications. Periodic follow-up evaluation for a mean period of 32 months (range, 12-98 months) showed that an adequate degree of premaxillary augmentation was maintained with no clinically detectable resorption of the mesh implant.

  16. The Augmented REality Sandtable (ARES)

    Science.gov (United States)

    2015-10-01

    Introduction The US Army Research Laboratory (ARL) Human Sciences Campaign calls out the topic of Virtual /Mixed and Augmented Reality as one of the...type of virtual environment. In virtual reality (VR), the totality of the environment is computer generated. In AR, the real world is augmented by...tangible user interfaces; and the effectiveness of virtual sand tables and similar systems. A market survey was also done to discover the state of

  17. Testing Augmented Reality Systems for Spotting Sub-Surface Impurities

    DEFF Research Database (Denmark)

    Hald, Kasper; Rehm, Matthias; Moeslund, Thomas B.

    2018-01-01

    This paper describes setup and procedure for testing augmented reality systems for showing sub-surface positions of foreign elements in an opaque mass. The goal is it test four types of setup in terms of user accuracy and speed, the four setups being a head-mounted see-through display, an arm...

  18. Control of criticality; Kawalan kegentingan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-31

    The chapter briefly discussed the following subjects: basic and the principle of criticality, natural uranium, neutron utilization, criticality data for systems, criticality accidents, criticality control i.e. mass, volume and geometry control .

  19. Reporting the methodology of height and weight acquisition in studies of body mass index-based prognosis in critically ill patients.

    Science.gov (United States)

    Oud, Lavi

    2013-10-01

    Conflicting findings were reported on the body mass index (BMI)-based prognosis of critically patients. Errors in source weight and height data can confound BMI group allocation. The aim of the present work was to examine investigators' reporting on the methods of height and weight acquisition (HWA). PubMed and Embase databases were searched for studies describing BMI group-based risk of death in critically ill patients. Eligible studies were examined for reporting on (1) the use of measured and/or estimated HWA, (2) details of measuring devices, (3) device accuracy, and (4) methods of adjustment for acute and chronic fluid-related weight changes. Thirty studies met the eligibility criteria, including 159,565 patients. No data were provided in 13 studies (52% of reported patients) on whether estimates or measurements were used for HWA. Measured HWA was used exclusively in 6 studies (3% of patients), and an unspecified combination of estimated and/or measured HWA was reported for the remainder. Only 1 study reported the specific devices used. None of the studies provided data on the bias and precision of measuring devices. Adjustment for chronic and/or acute fluid-related weight changes was addressed in 2 studies for each. These findings demonstrate the prevalent risk for BMI group misallocation in the reviewed studies, which may confound BMI-based prognosis, raising concerns about the validity of reported BMI-related prognostic impact. Copyright © 2013 Elsevier Inc. All rights reserved.

  20. Sarpogrelate hydrochloride, a selective 5-hydroxytryptamine(2A) antagonist, augments autologous bone marrow mononuclear cell implantation-induced improvement in endothelium-dependent vasodilation in patients with critical limb ischemia.

    Science.gov (United States)

    Higashi, Yukihito; Miyazaki, Masanori; Goto, Chikara; Sanada, Hiroaki; Sueda, Taijiro; Chayama, Kazuaki

    2010-01-01

    The purpose of this study was to determine the effect of a combination of bone marrow mononuclear cell (BM-MNC) implantation and sarpogrelate, a selective 5-HT(2A) antagonist, on endothelial function in patients with critical limb ischemia (CLI). We evaluated the leg blood flow (LBF) responses to acetylcholine (ACh) and sodium nitroprusside before and after BM-MNC implantation in 16 patients with CLI. We divided patients with CLI into 2 groups: those cotreated with sarpogrelate orally for 12 weeks (sarpogrelate group, n = 8) and those who remained on conventional therapy (control group, n = 8). LBF was measured by strain gauge plethysmography. BM-MNC implantation improved ankle brachial pressure index, transcutaneous oxygen pressure, and pain-free walking time. There was no significant difference in these parameters between the 2 groups. Before BM-MNC implantation, LBF responses to ACh were similar in the sarpogrelate group and control group. Twelve weeks of BM-MNC implantation enhanced LBF responses to ACh in the sarpogrelate and control groups. After 12 weeks of BM-MNC implantation, LBF response to ACh was significantly greater in the sarpogrelate group than in the control group. BM-MNC implantation did not alter the LBF responses to sodium nitroprusside in either group. These findings suggest that BM-MNC implantation improved not only limb ischemic symptoms but also endothelium-dependent vasodilation in patients with CLI. A combination of BM-MNC implantation and sarpogrelate had a more beneficial effect on vascular function in these patients.

  1. Bayesian Alternation During Tactile Augmentation

    Directory of Open Access Journals (Sweden)

    Caspar Mathias Goeke

    2016-10-01

    Full Text Available A large number of studies suggest that the integration of multisensory signals by humans is well described by Bayesian principles. However, there are very few reports about cue combination between a native and an augmented sense. In particular, we asked the question whether adult participants are able to integrate an augmented sensory cue with existing native sensory information. Hence for the purpose of this study we build a tactile augmentation device. Consequently, we compared different hypotheses of how untrained adult participants combine information from a native and an augmented sense. In a two-interval forced choice (2 IFC task, while subjects were blindfolded and seated on a rotating platform, our sensory augmentation device translated information on whole body yaw rotation to tactile stimulation. Three conditions were realized: tactile stimulation only (augmented condition, rotation only (native condition, and both augmented and native information (bimodal condition. Participants had to choose one out of two consecutive rotations with higher angular rotation. For the analysis, we fitted the participants’ responses with a probit model and calculated the just notable difference (JND. Then we compared several models for predicting bimodal from unimodal responses. An objective Bayesian alternation model yielded a better prediction (χred2 = 1.67 than the Bayesian integration model (χred2= 4.34. Slightly higher accuracy showed a non-Bayesian winner takes all model (χred2= 1.64, which either used only native or only augmented values per subject for prediction. However the performance of the Bayesian alternation model could be substantially improved (χred2= 1.09 utilizing subjective weights obtained by a questionnaire. As a result, the subjective Bayesian alternation model predicted bimodal performance most accurately among all tested models. These results suggest that information from augmented and existing sensory modalities in

  2. Augmented reality for breast imaging.

    Science.gov (United States)

    Rancati, Alberto; Angrigiani, Claudio; Nava, Maurizio B; Catanuto, Giuseppe; Rocco, Nicola; Ventrice, Fernando; Dorr, Julio

    2018-02-21

    Augmented reality (AR) enables the superimposition of virtual reality reconstructions onto clinical images of a real patient, in real time. This allows visualization of internal structures through overlying tissues, thereby providing a virtual transparency vision of surgical anatomy. AR has been applied to neurosurgery, which utilizes a relatively fixed space, frames, and bony references; the application of AR facilitates the relationship between virtual and real data. Augmented Breast imaging (ABI) is described. Breast MRI studies for breast implant patients with seroma were performed using a Siemens 3T system with a body coil and a four-channel bilateral phased-array breast coil as the transmitter and receiver, respectively. The contrast agent used was (CA) gadolinium (Gd) injection (0.1 mmol/kg at 2 ml/s) by a programmable power injector. Dicom formated images data from 10 MRI cases of breast implant seroma and 10 MRI cases with T1-2 N0 M0 breast cancer, were imported and transformed into Augmented reality images. Augmented breast imaging (ABI) demonstrated stereoscopic depth perception, focal point convergence, 3D cursor use, and joystick fly-through. Augmented breast imaging (ABI) to the breast can improve clinical outcomes, giving an enhanced view of the structures to work on. It should be further studied to determine its utility in clinical practice.

  3. Augmented Reality Imaging System: 3D Viewing of a Breast Cancer.

    Science.gov (United States)

    Douglas, David B; Boone, John M; Petricoin, Emanuel; Liotta, Lance; Wilson, Eugene

    2016-01-01

    To display images of breast cancer from a dedicated breast CT using Depth 3-Dimensional (D3D) augmented reality. A case of breast cancer imaged using contrast-enhanced breast CT (Computed Tomography) was viewed with the augmented reality imaging, which uses a head display unit (HDU) and joystick control interface. The augmented reality system demonstrated 3D viewing of the breast mass with head position tracking, stereoscopic depth perception, focal point convergence and the use of a 3D cursor and joy-stick enabled fly through with visualization of the spiculations extending from the breast cancer. The augmented reality system provided 3D visualization of the breast cancer with depth perception and visualization of the mass's spiculations. The augmented reality system should be further researched to determine the utility in clinical practice.

  4. Critical mass: Women in science

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes a video presentation designed to introduce science to middle and high school science classes as a field which is attractive to women. It is designed to facilitate thought and discussion on the issue of gender stereotypes and discrimination, and is intended for use as part of a curriculum plan which will discuss these issues.

  5. Augmenting digital displays with computation

    Science.gov (United States)

    Liu, Jing

    As we inevitably step deeper and deeper into a world connected via the Internet, more and more information will be exchanged digitally. Displays are the interface between digital information and each individual. Naturally, one fundamental goal of displays is to reproduce information as realistically as possible since humans still care a lot about what happens in the real world. Human eyes are the receiving end of such information exchange; therefore it is impossible to study displays without studying the human visual system. In fact, the design of displays is rather closely coupled with what human eyes are capable of perceiving. For example, we are less interested in building displays that emit light in the invisible spectrum. This dissertation explores how we can augment displays with computation, which takes both display hardware and the human visual system into consideration. Four novel projects on display technologies are included in this dissertation: First, we propose a software-based approach to driving multiview autostereoscopic displays. Our display algorithm can dynamically assign views to hardware display zones based on multiple observers' current head positions, substantially reducing crosstalk and stereo inversion. Second, we present a dense projector array that creates a seamless 3D viewing experience for multiple viewers. We smoothly interpolate the set of viewer heights and distances on a per-vertex basis across the arrays field of view, reducing image distortion, crosstalk, and artifacts from tracking errors. Third, we propose a method for high dynamic range display calibration that takes into account the variation of the chrominance error over luminance. We propose a data structure for enabling efficient representation and querying of the calibration function, which also allows user-guided balancing between memory consumption and the amount of computation. Fourth, we present user studies that demonstrate that the ˜ 60 Hz critical flicker fusion

  6. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  7. Therapeutic options for lip augmentation.

    Science.gov (United States)

    Segall, Lorne; Ellis, David A F

    2007-11-01

    Aesthetic ideals vary with emerging fashion trends and within different cultures. However, over the past few decades, fuller lips have been considered a desirable trait. Many younger patients are presenting for lip augmentation to achieve the sought-after look commonly seen in many fashion magazines. In addition, as individuals age, they lose lip volume, with a thinning of the red lip, some effacement of the vermillion border, and elongation and flattening of the white portion of the lip. Rejuvenation of the lips plays a key role in restoring a more youthful appearance. As a result, lip augmentation appeals to a wide spectrum of patients who present with various different aesthetic goals and expectations. Numerous therapeutic options exist for aesthetic lip augmentation, ranging from temporary and permanent injectable fillers to implants and other surgical techniques.

  8. A Determinate Model of Thrust-Augmenting Ejectors

    Science.gov (United States)

    Whitley, N.; Krothapalli, A.; van Dommelen, L.

    1996-01-01

    A theoretical analysis of the compressible flow through a constant-area jet-engine ejector in which a primary jet mixes with ambient fluid from a uniform free stream is pursued. The problem is reduced to a determinate mathematical one by prescribing the ratios of stagnation properties between the primary and secondary flows. For some selections of properties and parameters more than one solution is possible and the meaning of these solutions is discussed by means of asymptotic expansions. Our results further show that while under stationary conditions the thrust-augmentation ratio assumes a value of 2 in the large area-ratio limit, for a free-stream Mach number greater than 0.6 very little thrust augmentation is left. Due to the assumptions made, the analysis provides idealized values for the thrust-augmentation ratio and the mass flux entrainment factor.

  9. Normative Data for Interpreting the BREAST-Q: Augmentation

    Science.gov (United States)

    Mundy, Lily R.; Homa, Karen; Klassen, Anne F.; Pusic, Andrea L.; Kerrigan, Carolyn L.

    2016-01-01

    Background The BREAST-Q is a rigorously developed, well-validated, patient-reported outcome (PRO) instrument with a module designed for evaluating breast augmentation outcomes. However, there are no published normative BREAST-Q scores, limiting interpretation. Methods Normative data were generated for the BREAST-Q Augmentation Module via the Army of Women (AOW), an online community of women (with and without breast cancer) engaged in breast-cancer related research. Members were recruited via email, with women 18 years or older without a history of breast cancer or breast surgery invited to participate. Descriptive statistics and a linear multivariate regression were performed. A separate analysis compared normative scores to findings from previously published BREAST-Q augmentation studies. Results The preoperative BREAST-Q Augmentation Module was completed by 1,211 women. Mean age was 54 ±24 years, mean body mass index (BMI) was 27 ±6, and 39% (n=467) had a bra cup size ≥D. Mean scores were Satisfaction with Breasts (54 ±19), Psychosocial Well-being (66 ±20), Sexual Well-being (49 ±20), and Physical Well-being (86 ±15). Women with a BMI of 30 or greater and bra cup size D or greater had lower scores. In comparison to AOW scores, published BREAST-Q augmentation scores were lower before and higher after surgery for all scales except Physical Well-being. Conclusions The AOW normative data represent breast-related satisfaction and well-being in woman not actively seeking breast augmentation. This data may be used as normative comparison values for those seeking and undergoing surgery as we did, demonstrating the value of breast augmentation in this patient population. PMID:28350657

  10. Superconducting augmented rail gun (SARG)

    International Nuclear Information System (INIS)

    Homan, C.G.; Cummings, C.E.; Fowler, C.M.

    1986-01-01

    Superconducting augmentation consists of a superconducting coil operating in the persistent mode closely coupled magnetically with a normally conducting rail gun. A theoretical investigation of the effect of this system on a rail gun has shown that two benefits occur. Projectile velocities and launch efficiencies increase significantly depending on the magnetic coupling between the rail and augmentation circuits. Previous work evaluated an idealized system by neglecting energy dissipation effects. In this paper, the authors extend the analysis to include the neglected terms and show improved actual launch efficiencies for the SARG configuration. In this paper, the authors discuss details of projectile design in depth and present preliminary results of rail gun performance

  11. Flow interaction of diffuser augmented wind turbines

    Science.gov (United States)

    Göltenbott, U.; Ohya, Y.; Yoshida, S.; Jamieson, P.

    2016-09-01

    Up-scaling of wind turbines has been a major trend in order to reduce the cost of energy generation from the wind. Recent studies however show that for a given technology, the cost always rises with upscaling, notably due to the increased mass of the system. To reach capacities beyond 10 MW, multi-rotor systems (MRS) have promising advantages. On the other hand, diffuser augmented wind turbines (DAWTs) can significantly increase the performance of the rotor. Up to now, diffuser augmentation has only been applied to single small wind turbines. In the present research, DAWTs are used in a multi-rotor system. In wind tunnel experiments, the aerodynamics of two and three DAWTs, spaced in close vicinity in the same plane normal to a uniform flow, have been analysed. Power increases of up to 5% and 9% for the two and three rotor configurations are respectively achieved in comparison to a stand-alone turbine. The physical dynamics of the flows are analysed on the basis of the results obtained with a stand-alone turbine.

  12. Computer Augmented Learning; A Survey.

    Science.gov (United States)

    Kindred, J.

    The report contains a description and summary of computer augmented learning devices and systems. The devices are of two general types programed instruction systems based on the teaching machines pioneered by Pressey and developed by Skinner, and the so-called "docile" systems that permit greater user-direction with the computer under student…

  13. Aplikasi Web Augmented Reality Villa

    Directory of Open Access Journals (Sweden)

    Gede Yudha Prema Pangestu

    2017-07-01

    Full Text Available Bali is one of the highly developed tourist destination in Indonesia. The arrival of tourists having holiday in Bali led to increase residential needs with complete amenities. The occupancy rate of hotel and villa in Bali is increase significantlly during the long vacation. The emergence of new villa and hotel occupancy raises the level of competition in business, so it needs a correct use good marketing communication strategy in marketing the product in order to attract the attention of consumers. Web Application Augmented Reality Villa can help visualize the residential villa in three-dimensional shapes that look more attractive and practical. The use of brochures as written information and the application of augmented reality technology on the Web Application Augmented Reality Villa aims to develop an application that can provide information about the villa to visitors. Web Application uses Augmented Reality Villa designed by FlarToolkit library. Based on the test results show the application can display 3-dimensional objects by scanning marker villa in a brochure which already contain marker.

  14. Data Augmentation for Plant Classification

    NARCIS (Netherlands)

    Pawara, Pornntiwa; Okafor, Emmanuel; Schomaker, Lambertus; Wiering, Marco

    2017-01-01

    Data augmentation plays a crucial role in increasing the number of training images, which often aids to improve classification performances of deep learning techniques for computer vision problems. In this paper, we employ the deep learning framework and determine the effects of several

  15. Chapter 2. Surge capacity and infrastructure considerations for mass critical care. Recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza epidemic or mass disaster.

    Science.gov (United States)

    Hick, John L; Christian, Michael D; Sprung, Charles L

    2010-04-01

    To provide recommendations and standard operating procedures for intensive care unit (ICU) and hospital preparations for a mass disaster or influenza epidemic with a specific focus on surge capacity and infrastructure considerations. Based on a literature review and expert opinion, a Delphi process was used to define the essential topics including surge capacity and infrastructure considerations. Key recommendations include: (1) hospitals should increase their ICU beds to the maximal extent by expanding ICU capacity and expanding ICUs into other areas; (2) hospitals should have appropriate beds and monitors for these expansion areas; hospitals should develop contingency plans at the facility and government (local, state, provincial, national) levels to provide additional ventilators; (3) hospitals should develop a phased staffing plan (nursing and physician) for ICUs that provides sufficient patient care supervision during contingency and crisis situations; (4) hospitals should provide expert input to the emergency management personnel at the hospital both during planning for surge capacity as well as during response; (5) hospitals should assure that adequate infrastructure support is present to support critical care activities; (6) hospitals should prioritize locations for expansion by expanding existing ICUs, using postanesthesia care units and emergency departments to capacity, then step-down units, large procedure suites, telemetry units and finally hospital wards. Judicious planning and adoption of protocols for surge capacity and infrastructure considerations are necessary to optimize outcomes during a pandemic.

  16. Augmented reality and its practical application

    OpenAIRE

    ZÍTKOVÁ, Helena

    2011-01-01

    This thesis combines topic of augmented reality with tourism. For analyzing the state of the use of augmented reality was composed case studies. It was created product, which is called Guide to mobile phone.

  17. Augmented assessment as a means to augmented reality.

    Science.gov (United States)

    Bergeron, Bryan

    2006-01-01

    Rigorous scientific assessment of educational technologies typically lags behind the availability of the technologies by years because of the lack of validated instruments and benchmarks. Even when the appropriate assessment instruments are available, they may not be applied because of time and monetary constraints. Work in augmented reality, instrumented mannequins, serious gaming, and similar promising educational technologies that haven't undergone timely, rigorous evaluation, highlights the need for assessment methodologies that address the limitations of traditional approaches. The most promising augmented assessment solutions incorporate elements of rapid prototyping used in the software industry, simulation-based assessment techniques modeled after methods used in bioinformatics, and object-oriented analysis methods borrowed from object oriented programming.

  18. Use of Augmented Reality in Education

    OpenAIRE

    Jeřábek, Tomáš

    2014-01-01

    This thesis deals with phenomena of augmented reality in context of didactics. The thesis aims to define augmented reality in conceptual and content area and focuses on augmented reality in the structure of educational tools and identification of its functions and use from the didactical standpoint. The thesis characterizes augmented reality as a specific technological-perceptual concept and establishes a system of perceptual, technological and resulting aspects that reflect important paramet...

  19. Affordances in Mobile Augmented Reality Applications

    OpenAIRE

    Gjøsæter, Tor

    2014-01-01

    This paper explores the affordances of augmented reality content in a mobile augmented reality application. A user study was conducted by performing a multi-camera video recording of seven think aloud sessions. The think aloud sessions consisted of individual users performing tasks, exploring and experiencing a mobile augmented reality (MAR) application we developed for the iOS platform named ARad. We discuss the instrumental affordances we observed when users interacted with augmented realit...

  20. New Augmented Reality Taxonomy: Technologies and Features of Augmented Environment.

    OpenAIRE

    Hugues , Olivier; Fuchs , Philippe; Nannipieri , Olivier

    2011-01-01

    978-1-4614-0063-9; This article has a dual aim: firstly to define augmented reality (AR) en- vironments and secondly, based on our definition, a new taxonomy enabling these environments to be classified. After briefly reviewing existing classifica- tions, we define AR by its purpose, ie. to enable someone to create sensory- motor and cognitive activities in a new space combining the real environment and a virtual environment. Below we present our functional taxonomy of AR environments. We div...

  1. Women and Mental Health: Augmenting Undergraduates' Knowledge and Critical Thinking.

    Science.gov (United States)

    Gibson, Pamela Reed

    1992-01-01

    Describes an undergraduate course in psychology that addresses concepts relating to women's mental health. Explains that the course emphasizes the impact of social variables on mental health issues for women. Includes a list of topics and student activities for the course. Presents student reactions and assessment. (DK)

  2. [Augmentation technique on the proximal humerus].

    Science.gov (United States)

    Scola, A; Gebhard, F; Röderer, G

    2015-09-01

    The treatment of osteoporotic fractures is still a challenge. The advantages of augmentation with respect to primary in vitro stability and the clinical use for the proximal humerus are presented in this article. In this study six paired human humeri were randomized into an augmented and a non-augmented group. Osteosynthesis was performed with a PHILOS plate (Synthes®). In the augmented group the two screws finding purchase in the weakest cancellous bone were augmented. The specimens were tested in a 3-part fracture model in a varus bending test. The augmented PHILOS plates withstood significantly more load cycles until failure. The correlation to bone mineral density (BMD) showed that augmentation could partially compensate for low BMD. The augmentation of the screws in locked plating in a proximal humerus fracture model is effective in improving the primary stability in a cyclic varus bending test. The targeted augmentation of two particular screws in a region of low bone quality within the humeral head was almost as effective as four screws with twice the amount of bone cement. Screw augmentation combined with a knowledge of the local bone quality could be more effective in enhancing the primary stability of a proximal humerus locking plate because the effect of augmentation can be exploited more effectively limiting it to the degree required. The technique of augmentation is simple and can be applied in open and minimally invasive procedures. When the correct procedure is used, complications (cement leakage into the joint) can be avoided.

  3. Augmented Reality for Multi-disciplinary Collaboration

    OpenAIRE

    Wang, Xiangyu; Rui,

    2010-01-01

    This chapter presents a framework for multi-disciplinary collaboration. Tangible Augmented Reality has been raised as one of suitable systems for design collaboration. Furthermore, it emphasizes the advantages of Tangible Augmented Reality to illustrate the needs for integrating the Tangible User Interfaces and Augmented Reality Systems.

  4. Shielding measurements and augmentation for high power operations of FBTR

    International Nuclear Information System (INIS)

    Jose, M.T.; Baskar, S.; Viswanathan, S.; Balasundar, S.; Subramanian, V.; Ravi, T.; Sundaram, V.M.; Raghunath, V.M.; Varadarajan, S.; Jena, A.K.

    1996-01-01

    Fast breeder test reactor (FBTR) at Kalpakkam is a 40 MWt loop type fast reactor with sodium coolant. Since criticality in 1985, radiation surveys were carried out at all accessible locations at different power levels to find out the hot spots and evaluate the shielding adequacy. This paper gives the details of findings of these measurements, consequent changes in shielding, and the present status of dose profile after the augmentation of shielding. (author). 1 ref., 1 fig., 1 tab

  5. GNApp - an open source augmentative and alternative communication framework

    CSIR Research Space (South Africa)

    Coetzee, L

    2006-02-01

    Full Text Available them to improve the quality of their lives; • Addresses a critical human need to communicate with others through new and affordable technology; • Aims to generate tangible outputs in the form of technology building blocks and technology demonstrators...; and • Operates in partnership with a representative group of Disabled Persons’ Organisations and the Office on the Status of Disabled Persons (OSDP) in the Presidency. AAC – WHAT IS AUGMENTATIVE AND ALTERNATIVE COMMUNICATION? • AAC is the supplementation and...

  6. Development of evaluation methods for impact of earthquake-induced slope failure on nearby critical structures. Analysis of behavior of collapsed rock masses using 3-D distinct element method

    International Nuclear Information System (INIS)

    Ishimaru, Makoto; Tochigi, Hitoshi; Nakajima, Masato; Shirai, Koji

    2012-01-01

    Recently, importance of evaluation for impact of earthquake-induced slope failure on nearby critical structures is increasing in order to evaluate seismic stability of the slope, in addition to evaluating the possibilities of slope failure. In this study, we presented an examination flow chart to evaluate the impact on structures after slope failure. In the examination flow chart, we assumed the following four considerations; (1) evaluation of the collapse region of the slope, (2) evaluation of behavior of the collapsed rock masses, (3) evaluation of the impact on the structures, (4) examination of the countermeasures. And, for the purpose of using three dimensional distinct element method (DEM) for evaluation of behavior of the collapsed rock masses, we firstly confirmed applicability of DEM to behavior of a mass hurtling down the slope by means of comparing with the model test results. Moreover, we clarified influence of initial position or restitution coefficient of rock masses on final traveling distance of collapsed rock masses. (author)

  7. Augmented robotic device for EVA hand manoeuvres

    Science.gov (United States)

    Matheson, Eloise; Brooker, Graham

    2012-12-01

    During extravehicular activities (EVAs), pressurised space suits can lead to difficulties in performing hand manoeuvres and fatigue. This is often the cause of EVAs being terminated early, or taking longer to complete. Assistive robotic gloves can be used to augment the natural motion of a human hand, meaning work can be carried out more efficiently with less stress to the astronaut. Lightweight and low profile solutions must be found in order for the assistive robotic glove to be easily integrated with a space suit pressure garment. Pneumatic muscle actuators combined with force sensors are one such solution. These actuators are extremely light, yet can output high forces using pressurised gases as the actuation drive. Their movement is omnidirectional, so when combined with a flexible exoskeleton that itself provides a degree of freedom of movement, individual fingers can be controlled during flexion and extension. This setup allows actuators and other hardware to be stored remotely on the user's body, resulting in the least possible mass being supported by the hand. Two prototype gloves have been developed at the University of Sydney; prototype I using a fibreglass exoskeleton to provide flexion force, and prototype II using torsion springs to achieve the same result. The gloves have been designed to increase the ease of human movements, rather than to add unnatural ability to the hand. A state space control algorithm has been developed to ensure that human initiated movements are recognised, and calibration methods have been implemented to accommodate the different characteristics of each wearer's hands. For this calibration technique, it was necessary to take into account the natural tremors of the human hand which may have otherwise initiated unexpected control signals. Prototype I was able to actuate the user's hand in 1 degree of freedom (DOF) from full flexion to partial extension, and prototype II actuated a user's finger in 2 DOF with forces achieved

  8. Augmented reality building operations tool

    Science.gov (United States)

    Brackney, Larry J.

    2014-09-09

    A method (700) for providing an augmented reality operations tool to a mobile client (642) positioned in a building (604). The method (700) includes, with a server (660), receiving (720) from the client (642) an augmented reality request for building system equipment (612) managed by an energy management system (EMS) (620). The method (700) includes transmitting (740) a data request for the equipment (612) to the EMS (620) and receiving (750) building management data (634) for the equipment (612). The method (700) includes generating (760) an overlay (656) with an object created based on the building management data (634), which may be sensor data, diagnostic procedures, or the like. The overlay (656) is configured for concurrent display on a display screen (652) of the client (642) with a real-time image of the building equipment (612). The method (700) includes transmitting (770) the overlay (656) to the client (642).

  9. Augmented Reality 2.0

    Science.gov (United States)

    Schmalstieg, Dieter; Langlotz, Tobias; Billinghurst, Mark

    Augmented Reality (AR) was first demonstrated in the 1960s, but only recently have technologies emerged that can be used to easily deploy AR applications to many users. Camera-equipped cell phones with significant processing power and graphics abilities provide an inexpensive and versatile platform for AR applications, while the social networking technology of Web 2.0 provides a large-scale infrastructure for collaboratively producing and distributing geo-referenced AR content. This combination of widely used mobile hardware and Web 2.0 software allows the development of a new type of AR platform that can be used on a global scale. In this paper we describe the Augmented Reality 2.0 concept and present existing work on mobile AR and web technologies that could be used to create AR 2.0 applications.

  10. Augmented Reality in Science Education

    DEFF Research Database (Denmark)

    Nielsen, Birgitte Lund; Brandt, Harald; Swensen, Hakon

    Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits and chall......Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits...... and challenges related to AR enhancing student learning in science in lower secondary school were identified by expert science teachers, ICT designers and science education researchers from four countries in a Delphi survey. Findings were condensed in a framework to categorize educational AR designs....

  11. Tracking for Outdoor Mobile Augmented Reality: Further development of the Zion Augmented Reality Application

    OpenAIRE

    Strand, Tor Egil Riegels

    2008-01-01

    This report deals with providing tracking to an outdoor mobile augmented reality system and the Zion Augmented Reality Application. ZionARA is meant to display a virtual recreation of a 13th century castle on the site it once stood through an augmented reality Head Mounted Display. Mobile outdoor augmented/mixed reality puts special demands on what kind of equipment is practical. After briefly evaluating the different existing tracking methods, a solution based on GPS and an augmented inertia...

  12. Aesthetic occiput augmentation using methylmethacrylate.

    Science.gov (United States)

    Song, Yong Tai

    2015-01-01

    Cranioplasty for only aesthetic reasons has not been commonly performed to date. However, recently there has been a new focus by the public on a more aesthetically pleasing head shape with frequent patient requests for purely aesthetic contouring of the occiput, an important definer of cosmetic head shape. For example, in Asia, where the normal cranial shape is mesocephalic or brachycephalic and often with a planar occiput, requests for its aesthetic correction are increasingly common. Accordingly, the author developed a minimally invasive occiput augmentation using methylmethacrylate. In this study, the indications for aesthetic occiput contouring were planar occiput, left-right asymmetric occiput, and grooved occiput. Under local anesthesia, soft methylmethacrylate is subperiosteally inserted through a small incision (about 5-cm length), manually and precisely contoured in situ through the scalp to the desired occipital shape. All is performed as an outpatient procedure, and a quick recovery is the case. Between March 2007 and October 2013, 959 patients received such aesthetic occiput augmentation. The mean follow-up period was 49 months (range, 3-84 months). Nearly all patients were satisfied with the outcome, and complications were very rare. Only 5 patients (0.5%) needed additional corrective procedures. The author has concluded that aesthetic occiput augmentation using methylmethacrylate yields consistent, predictable, and satisfactory results. Additional long-term follow-up is required for a final conclusion, however.

  13. Facial sculpting and tissue augmentation.

    Science.gov (United States)

    Carruthers, Jean D A; Carruthers, Alastair

    2005-11-01

    Until recently, deep facial sculpting was exclusively the domain of surgical interventions. Recent advances in the available array of dermal and subdermal fillers combined with an esthetic appreciation by both surgeons and nonsurgeons alike of the positive effect of filling the volume-depleted face have led to an expansion in the indications for the use of soft tissue augmenting agents. Subdermal support of the lateral two-thirds of the brow, the nasojugal fold, the malar and buccal fat pads, the lateral lip commissures, and the perioral region, including the pre-jowl sulcus, all restore youthful facial contour and harmony. An important advance in technique is the subdermal rather than the intradermal injection plane. "Instant" facial sculpting giving a brow-lift, cheek-lift, lip expansion, and perioral augmentation is possible using modern soft tissue augmenting agents. The softer, more relaxed appearance contrasts to the somewhat "pulled" appearance of subjects who have had surgical overcorrections. Treatments can be combined with botulinum toxin and other procedures if required. Newer advances in the use of fillers include the use of fillers injected in the subdermal plane for "lunchtime" facial sculpting. Using the modern esthetic filler compounds, which are biodegradable but longer lasting, subjects can have a "rehearsal" treatment or make it ongoing. Some individuals, such as those with human immunodeficiency virus (HIV)-related lipoatrophy or those who desire to obtain a longer-lasting effect, may elect to use a nonbiodegradable filling agent.

  14. Stereoscopic augmented reality for laparoscopic surgery.

    Science.gov (United States)

    Kang, Xin; Azizian, Mahdi; Wilson, Emmanuel; Wu, Kyle; Martin, Aaron D; Kane, Timothy D; Peters, Craig A; Cleary, Kevin; Shekhar, Raj

    2014-07-01

    Conventional laparoscopes provide a flat representation of the three-dimensional (3D) operating field and are incapable of visualizing internal structures located beneath visible organ surfaces. Computed tomography (CT) and magnetic resonance (MR) images are difficult to fuse in real time with laparoscopic views due to the deformable nature of soft-tissue organs. Utilizing emerging camera technology, we have developed a real-time stereoscopic augmented-reality (AR) system for laparoscopic surgery by merging live laparoscopic ultrasound (LUS) with stereoscopic video. The system creates two new visual cues: (1) perception of true depth with improved understanding of 3D spatial relationships among anatomical structures, and (2) visualization of critical internal structures along with a more comprehensive visualization of the operating field. The stereoscopic AR system has been designed for near-term clinical translation with seamless integration into the existing surgical workflow. It is composed of a stereoscopic vision system, a LUS system, and an optical tracker. Specialized software processes streams of imaging data from the tracked devices and registers those in real time. The resulting two ultrasound-augmented video streams (one for the left and one for the right eye) give a live stereoscopic AR view of the operating field. The team conducted a series of stereoscopic AR interrogations of the liver, gallbladder, biliary tree, and kidneys in two swine. The preclinical studies demonstrated the feasibility of the stereoscopic AR system during in vivo procedures. Major internal structures could be easily identified. The system exhibited unobservable latency with acceptable image-to-video registration accuracy. We presented the first in vivo use of a complete system with stereoscopic AR visualization capability. This new capability introduces new visual cues and enhances visualization of the surgical anatomy. The system shows promise to improve the precision and

  15. CLIENT INTERACTION TECHNIQUES WHEN USING AUGMENTED REALITY TECHNOLOGY APPLICATIONS IN SALES

    OpenAIRE

    Kravtsov A. A.; Loyko V. I.

    2015-01-01

    Augmented reality offers unique ways to display visual information, in particular the visualization of threedimensional objects. With AR object can be visualized directly in the context of its operation. As an example can be a piece of furniture rendered in the interior, plants in the garden, the architectural object in the landscape. Modern consumer devices such as smartphones and tablet computers, as well as the algorithmic base lead to the possibility of augmented reality mass usage. The c...

  16. Augmented reality in intraventricular neuroendoscopy.

    Science.gov (United States)

    Finger, T; Schaumann, A; Schulz, M; Thomale, Ulrich-W

    2017-06-01

    Individual planning of the entry point and the use of navigation has become more relevant in intraventricular neuroendoscopy. Navigated neuroendoscopic solutions are continuously improving. We describe experimentally measured accuracy and our first experience with augmented reality-enhanced navigated neuroendoscopy for intraventricular pathologies. Augmented reality-enhanced navigated endoscopy was tested for accuracy in an experimental setting. Therefore, a 3D-printed head model with a right parietal lesion was scanned with a thin-sliced computer tomography. Segmentation of the tumor lesion was performed using Scopis NovaPlan navigation software. An optical reference matrix is used to register the neuroendoscope's geometry and its field of view. The pre-planned ROI and trajectory are superimposed in the endoscopic image. The accuracy of the superimposed contour fitting on endoscopically visualized lesion was acquired by measuring the deviation of both midpoints to one another. The technique was subsequently used in 29 cases with CSF circulation pathologies. Navigation planning included defining the entry points, regions of interests and trajectories, superimposed as augmented reality on the endoscopic video screen during intervention. Patients were evaluated for postoperative imaging, reoperations, and possible complications. The experimental setup revealed a deviation of the ROI's midpoint from the real target by 1.2 ± 0.4 mm. The clinical study included 18 cyst fenestrations, ten biopsies, seven endoscopic third ventriculostomies, six stent placements, and two shunt implantations, being eventually combined in some patients. In cases of cyst fenestrations postoperatively, the cyst volume was significantly reduced in all patients by mean of 47%. In biopsies, the diagnostic yield was 100%. Reoperations during a follow-up period of 11.4 ± 10.2 months were necessary in two cases. Complications included one postoperative hygroma and one insufficient

  17. Webizing mobile augmented reality content

    Science.gov (United States)

    Ahn, Sangchul; Ko, Heedong; Yoo, Byounghyun

    2014-01-01

    This paper presents a content structure for building mobile augmented reality (AR) applications in HTML5 to achieve a clean separation of the mobile AR content and the application logic for scaling as on the Web. We propose that the content structure contains the physical world as well as virtual assets for mobile AR applications as document object model (DOM) elements and that their behaviour and user interactions are controlled through DOM events by representing objects and places with a uniform resource identifier. Our content structure enables mobile AR applications to be seamlessly developed as normal HTML documents under the current Web eco-system.

  18. Indeterminacy and labor augmenting externalities

    DEFF Research Database (Denmark)

    Poulsen, Odile; Goenka, Aditya

    2002-01-01

    In this two-sector discrete time model of endogenous economic growth intersectoral effects are assumed to be "labor augmenting" We derive necessary and sufficient conditions for local indeterminacy and multiplicity of the balanced growth path in terms of factor intensities in both sectors....... The balanced growth path is unique if the consumption good sector is more capital intensive. However, it can be indeterminate. When the investment good sector is more capital intensive a sufficient condition for indeterminacy is that there exists at least three balanced growth paths....

  19. Matrix-Assisted Laser Desorption Ionization Mass Spectrometry Imaging for Peptide and Protein Analyses: A Critical Review of On-Tissue Digestion

    NARCIS (Netherlands)

    Cillero-Pastor, B.; Heeren, R.M.A.

    2013-01-01

    Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) has established itself among the plethora of mass spectrometry applications. In the biomedical field, MALDI-MSI is being more frequently recognized as a new method for the discovery of biomarkers and targets of

  20. Psychotherapy augmentation through preconscious priming

    Directory of Open Access Journals (Sweden)

    Francois eBorgeat

    2013-03-01

    Full Text Available Objective: To test the hypothesis that repeated preconscious (masked priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition involved listening twice daily with a passive attitude to a recording of individualized formulations of appropriate cognitions and attitudes masked by music. The Control condition involved listening to an indistinguishable recording where the formulations had been replaced by random numbers. Changes in social cognitions were measured by the Social Interaction Self Statements Test (SISST.Results: Patients improved following therapy. The Priming procedure was associated with increased positive cognitions and decreased negative cognitions on the SISST while the Control procedure was not. The Priming procedure induced more cognitive change when applied immediately after the group therapy. Conclusion: An effect of priming was observed on social phobia related cognitions in the expected direction. This self administered addition to a therapy could be seen as an augmentation strategy.

  1. Enhancing tourism with augmented and virtual reality

    OpenAIRE

    Jenny, Sandra

    2017-01-01

    Augmented and virtual reality are on the advance. In the last twelve months, several interesting devices have entered the market. Since tourism is one of the fastest growing economic sectors in the world and has become one of the major players in international commerce, the aim of this thesis was to examine how tourism could be enhanced with augmented and virtual reality. The differences and functional principles of augmented and virtual reality were investigated, general uses were described ...

  2. Interactive Assembly Guide using Augmented Reality

    DEFF Research Database (Denmark)

    Andersen, Martin; Andersen, Rasmus Skovgaard; Larsen, Christian Lindequist

    2009-01-01

    This paper presents an Augmented Reality system for aiding a pump assembling process at Grundfos, one of the leading pump producers. Stable pose estimation of the pump is required in order to augment the graphics correctly. This is achieved by matching image edges with synthesized edges from CAD...... norm. A dynamic visualization of the augmented graphics provides the user with guidance. Usability tests show that the accuracy of the system is sufficient for assembling the pump....

  3. Augmented Reality Using JavaScript

    OpenAIRE

    Hailemichael, Aida

    2013-01-01

    The project goal was to provide a mobile application, for a venue called Kulturhuset Karelia which is located in Tammisaari Finland. In this paper, the concept of Augmented Reality technology is briefly discussed along with the mobile application for the venue. The utilisation of JavaScript for creating Augmented reality content for mobile Augmented reality browser is also demonstrated. The application was created by using Architecht API which is Jacvascript library based on the Wikitude...

  4. Augmenting Locomotion in an Anthropomorphic System

    Directory of Open Access Journals (Sweden)

    Derek Wight

    2005-02-01

    Full Text Available A powered orthosis has applications ranging from assisting the elderly to augmenting astronauts. An assistive control scheme is developed that uses the force from a slave actuator to augment the force of a master actuator. This can be used to augment a closed-loop control scheme applied to the master actuator. Initially, actuator augmentation is explored both theoretically and experimentally using a simple mechanical system. The control scheme is then applied to a scale model of human lower limbs on a stationary bicycle to investigate the feasibility of a powered orthosis using pneumatic muscle actuators.

  5. [Cement augmentation on the spine : Biomechanical considerations].

    Science.gov (United States)

    Kolb, J P; Weiser, L; Kueny, R A; Huber, G; Rueger, J M; Lehmann, W

    2015-09-01

    Vertebral compression fractures are the most common osteoporotic fractures. Since the introduction of vertebroplasty and screw augmentation, the management of osteoporotic fractures has changed significantly. The biomechanical characteristics of the risk of adjacent fractures and novel treatment modalities for osteoporotic vertebral fractures, including pure cement augmentation by vertebroplasty, and cement augmentation of screws for posterior instrumentation, are explored. Eighteen human osteoporotic lumbar spines (L1-5) adjacent to vertebral bodies after vertebroplasty were tested in a servo-hydraulic machine. As augmentation compounds we used standard cement and a modified low-strength cement. Different anchoring pedicle screws were tested with and without cement augmentation in another cohort of human specimens with a simple pull-out test and a fatigue test that better reflects physiological conditions. Cement augmentation in the osteoporotic spine leads to greater biomechanical stability. However, change in vertebral stiffness resulted in alterations with the risk of adjacent fractures. By using a less firm cement compound, the risk of adjacent fractures is significantly reduced. Both screw augmentation techniques resulted in a significant increase in the withdrawal force compared with the group without cement. Augmentation using perforated screws showed the highest stability in the fatigue test. The augmentation of cement leads to a significant change in the biomechanical properties. Differences in the stability of adjacent vertebral bodies increase the risk of adjacent fractures, which could be mitigated by a modified cement compound with reduced strength. Screws that were specifically designed for cement application displayed greatest stability in the fatigue test.

  6. Augmented reality in dentistry: a current perspective.

    Science.gov (United States)

    Kwon, Ho-Beom; Park, Young-Seok; Han, Jung-Suk

    2018-02-21

    Augmentation reality technology offers virtual information in addition to that of the real environment and thus opens new possibilities in various fields. The medical applications of augmentation reality are generally concentrated on surgery types, including neurosurgery, laparoscopic surgery and plastic surgery. Augmentation reality technology is also widely used in medical education and training. In dentistry, oral and maxillofacial surgery is the primary area of use, where dental implant placement and orthognathic surgery are the most frequent applications. Recent technological advancements are enabling new applications of restorative dentistry, orthodontics and endodontics. This review briefly summarizes the history, definitions, features, and components of augmented reality technology and discusses its applications and future perspectives in dentistry.

  7. INTEGRATIVE AUGMENTATION OF STANDARDIZED MANAGEMENT SYSTEMS

    Directory of Open Access Journals (Sweden)

    Stanislav Karapetrovic

    2008-03-01

    Full Text Available The development, features and integrating abilities of different international standards related to management systems are discussed. A group of such standards that augment the performance of quality management systems in organizations is specifically focused on. The concept, characteristics and an illustrative example of one augmenting standard, namely ISO 10001, are addressed. Integration of standardized augmenting systems, both by themselves and within the overall management system, is examined. It is argued that, in research and practice alike, integrative augmentation represents the future of standardized quality and other management systems.

  8. Dietary strategies to augment muscle mass in the elderly

    NARCIS (Netherlands)

    Tieland, C.A.B.

    2013-01-01

    Background: The world population is aging rapidly. This growth of the aging population is accompanied by an increased number of frail elderly people who are at risk of adverse health outcomes such as disability, co-morbidity and

  9. Use of augmentative and alternative communication strategies by family members in the intensive care unit.

    Science.gov (United States)

    Broyles, Lauren M; Tate, Judith A; Happ, Mary Beth

    2012-03-01

    Little is known about communication between patients and their family members during critical illness and mechanical ventilation in the intensive care unit, including use of augmentative and alternative communication tools and strategies. To identify (1) which augmentative and alternative communication tools families use with nonspeaking intensive care patients and how they are used, and (2) what families and nurses say about communication of family members with nonspeaking intensive care patients. A qualitative secondary analysis was conducted of existing data from a clinical trial testing interventions to improve communication between nurses and intensive care patients. Narrative study data (field notes, intervention logs, nurses' interviews) from 127 critically ill adults were reviewed for evidence of family involvement with augmentative and alternative communication tools. Qualitative content analysis was applied for thematic description of family members' and nurses' accounts of patient-family communication. Family involvement with augmentative and alternative communication tools was evident in 44% of the 93 patients who completed the parent study protocol. Spouses or significant others communicated with patients most often. Main themes describing patient-family communication included (1) families being unprepared and unaware, (2) families' perceptions of communication effectiveness, (3) nurses deferring to or guiding patient-family communication, (4) patients' communication characteristics, and (5) families' experience with and interest in augmentative and alternative communication tools. Assessment by skilled bedside clinicians can reveal patients' communication potential and facilitate useful augmentative and alternative communication tools and strategies for patients and their families.

  10. CriticalEd

    DEFF Research Database (Denmark)

    Kjellberg, Caspar Mølholt; Meredith, David

    2014-01-01

    . Since the comments are not input sequentially, with regard to position, but in arbitrary order, this list must be sorted by copy/pasting the rows into place—an error-prone and time-consuming process. Scholars who produce critical editions typically use off-the-shelf music notation software......The best text method is commonly applied among music scholars engaged in producing critical editions. In this method, a comment list is compiled, consisting of variant readings and editorial emendations. This list is maintained by inserting the comments into a document as the changes are made......, consisting of a Sibelius plug-in, a cross-platform application, called CriticalEd, and a REST-based solution, which handles data storage/retrieval. A prototype has been tested at the Danish Centre for Music Publication, and the results suggest that the system could greatly improve the efficiency...

  11. Mass Society

    DEFF Research Database (Denmark)

    Borch, Christian

    2017-01-01

    the negative features usually ascribed by late nineteenth-century crowd psychology to spontaneous crowds, and attributes these to the entire social fabric. However, in contrast to crowd psychology, theorists of mass society often place greater emphasis on how capitalism, technological advances, or demographic......Mass society is a societal diagnosis that emphasizes – usually in a pejorative, modernity critical manner – a series of traits allegedly associated with modern society, such as the leveling of individuality, moral decay, alienation, and isolation. As such, the notion of mass society generalizes...... developments condition such negative features, and some theorists argue that mass society produces a propensity to totalitarianism. Discussions of mass society culminated in the early and mid-twentieth century....

  12. LEARNING ANATOMY WITH AUGMENTED REALITY

    DEFF Research Database (Denmark)

    Nørgaard, Cita; Dyhrberg O'Neill, Lotte; Nielsen, Kurt Gammelgaard

    An Augmented Reality (AR) app for Hololens glasses was developed to help students learn the anatomy of the human body mediastinum. In this research project, we wanted to evaluate whether AR: strengthened the students’ self-efficacy and motivation, helped students to improve learning, and provided...... a questionnaire regarding their self-efficacy and motivation, presence in the virtual room, experiences with Hololens teaching, and how they used the quizzes. In addition, students answered a test with the same 20 questions used in the app and three additional transfer questions new to students. Finally, students......’ scores on the mediastinum questions in the exam 2 month later were collected to examine the long-term memory of content. Internal consistency was estimated for all measures. Correlations between measures were examined with a correlation matrix, and group differences were examined with one-way analysis...

  13. Augmented reality in laser laboratories

    Science.gov (United States)

    Quercioli, Franco

    2018-05-01

    Laser safety glasses block visibility of the laser light. This is a big nuisance when a clear view of the beam path is required. A headset made up of a smartphone and a viewer can overcome this problem. The user looks at the image of the real world on the cellphone display, captured by its rear camera. An unimpeded and safe sight of the laser beam is then achieved. If the infrared blocking filter of the smartphone camera is removed, the spectral sensitivity of the CMOS image sensor extends in the near infrared region up to 1100 nm. This substantial improvement widens the usability of the device to many laser systems for industrial and medical applications, which are located in this spectral region. The paper describes this modification of a phone camera to extend its sensitivity beyond the visible and make a true augmented reality laser viewer.

  14. Augmented reality for improved safety

    CERN Multimedia

    Stefania Pandolfi

    2016-01-01

    Sometimes, CERN experts have to operate in low visibility conditions or in the presence of possible hazards. Minimising the duration of the operation and reducing the risk of errors is therefore crucial to ensuring the safety of personnel. The EDUSAFE project integrates different technologies to create a wearable personnel safety system based on augmented reality.    The EDUSAFE integrated safety system uses a camera mounted on the helmet to monitor the working area.  In its everyday operation of machines and facilities, CERN adopts a whole set of measures and safety equipment to ensure the safety of its personnel, including personal wearable safety devices and access control systems. However, sometimes, scheduled and emergency maintenance work needs to be done in zones with potential cryogenic hazards, in the presence of radioactive equipment or simply in demanding conditions where visibility is low and moving around is difficult. The EDUSAFE Marie Curie Innovative&...

  15. Augmented Reality and Mobile Art

    Science.gov (United States)

    Gwilt, Ian

    The combined notions of augmented-reality (AR) and mobile art are based on the amalgamation of a number of enabling technologies including computer imaging, emergent display and tracking systems and the increased computing-power in hand-held devices such as Tablet PCs, smart phones, or personal digital assistants (PDAs) which have been utilized in the making of works of art. There is much published research on the technical aspects of AR and the ongoing work being undertaken in the development of faster more efficient AR systems [1] [2]. In this text I intend to concentrate on how AR and its associated typologies can be applied in the context of new media art practices, with particular reference to its application on hand-held or mobile devices.

  16. LOFT Augmented Operator Capability Program

    International Nuclear Information System (INIS)

    Hollenbeck, D.A.; Krantz, E.A.; Hunt, G.L.; Meyer, O.R.

    1980-01-01

    The outline of the LOFT Augmented Operator Capability Program is presented. This program utilizes the LOFT (Loss-of-Fluid Test) reactor facility which is located at the Idaho National Engineering Laboratory and the LOFT operational transient experiment series as a test bed for methods of enhancing the reactor operator's capability for safer operation. The design of an Operational Diagnotics and Display System is presented which was backfit to the existing data acquisition computers. Basic color-graphic displays of the process schematic and trend type are presented. In addition, displays were developed and are presented which represent safety state vector information. A task analysis method was applied to LOFT reactor operating procedures to test its usefulness in defining the operator's information needs and workload

  17. Sensory augmentation for the blind

    Directory of Open Access Journals (Sweden)

    Silke Manuela Kärcher

    2012-03-01

    Full Text Available Enacted theories of consciousness conjecture that perception and cognition arise from an active experience of the regular relations that are tying together the sensory stimulation of different modalities and associated motor actions. Previous experiments investigated this concept by employing the technique of sensory substitution. Building on these studies, here we test a set of hypotheses derived from this framework and investigate the utility of sensory augmentation in handicapped people. We provide a late blind subject with a new set of sensorimotor laws: A vibro-tactile belt continually signals the direction of magnetic north. The subject completed a set of behavioral tests before and after an extended training period. The tests were complemented by questionnaires and interviews. This newly supplied information improved performance on different time scales. In a pointing task we demonstrate an instant improvement of performance based on the signal provided by the device. Furthermore, the signal was helpful in relevant daily tasks, often complicated for the blind, such as keeping a direction over longer distances or taking shortcuts in familiar environments. A homing task with an additional attentional load demonstrated a significant improvement after training. The subject found the directional information highly expedient for the adjustment of his inner maps of familiar environments and describes an increase in his feeling of security when exploring unfamiliar environments with the belt. The results give evidence for a firm integration of the newly supplied signals into the behavior of this late blind subject with better navigational performance and more courageous behavior in unfamiliar environments. Most importantly, the complementary information provided by the belt lead to a positive emotional impact with enhanced feeling of security. This experimental approach demonstrates the potential of sensory augmentation devices for the help of

  18. Rotor Design for Diffuser Augmented Wind Turbines

    Directory of Open Access Journals (Sweden)

    Søren Hjort

    2015-09-01

    Full Text Available Diffuser augmented wind turbines (DAWTs can increase mass flow through the rotor substantially, but have often failed to fulfill expectations. We address high-performance diffusers, and investigate the design requirements for a DAWT rotor to efficiently convert the available energy to shaft energy. Several factors can induce wake stall scenarios causing significant energy loss. The causality between these stall mechanisms and earlier DAWT failures is discussed. First, a swirled actuator disk CFD code is validated through comparison with results from a far wake swirl corrected blade-element momentum (BEM model, and horizontal-axis wind turbine (HAWT reference results. Then, power efficiency versus thrust is computed with the swirled actuator disk (AD code for low and high values of tip-speed ratios (TSR, for different centerbodies, and for different spanwise rotor thrust loading distributions. Three different configurations are studied: The bare propeller HAWT, the classical DAWT, and the high-performance multi-element DAWT. In total nearly 400 high-resolution AD runs are generated. These results are presented and discussed. It is concluded that dedicated DAWT rotors can successfully convert the available energy to shaft energy, provided the identified design requirements for swirl and axial loading distributions are satisfied.

  19. Augmented Visual Experience of Simulated Solar Phenomena

    Science.gov (United States)

    Tucker, A. O., IV; Berardino, R. A.; Hahne, D.; Schreurs, B.; Fox, N. J.; Raouafi, N.

    2017-12-01

    The Parker Solar Probe (PSP) mission will explore the Sun's corona, studying solar wind, flares and coronal mass ejections. The effects of these phenomena can impact the technology that we use in ways that are not readily apparent, including affecting satellite communications and power grids. Determining the structure and dynamics of corona magnetic fields, tracing the flow of energy that heats the corona, and exploring dusty plasma near the Sun to understand its influence on solar wind and energetic particle formation requires a suite of sensors on board the PSP spacecraft that are engineered to observe specific phenomena. Using models of these sensors and simulated observational data, we can visualize what the PSP spacecraft will "see" during its multiple passes around the Sun. Augmented reality (AR) technologies enable convenient user access to massive data sets. We are developing an application that allows users to experience environmental data from the point of view of the PSP spacecraft in AR using the Microsoft HoloLens. Observational data, including imagery, magnetism, temperature, and density are visualized in 4D within the user's immediate environment. Our application provides an educational tool for comprehending the complex relationships of observational data, which aids in our understanding of the Sun.

  20. An Integrative Introduction to Human Augmentation Science

    OpenAIRE

    Alicea, Bradly

    2018-01-01

    Human Augmentation (HA) spans several technical fields and methodological approaches, including Experimental Psychology, Human-Computer Interaction, Psychophysiology, and Artificial Intelligence. Augmentation involves various strategies for optimizing and controlling cognitive states, which requires an understanding of biological plasticity, dynamic cognitive processes, and models of adaptive systems. As an instructive lesson, we will explore a few HA-related concepts and outstanding issues. ...

  1. Augmented REality Sandtables (ARESs) Impact on Learning

    Science.gov (United States)

    2016-07-01

    ARL-CR-0803 ● JULY 2016 US Army Research Laboratory Augmented REality Sandtable’s (ARES’s) Impact on Learning by Tarah N......The use of augmented reality (AR) to supplement training tools, specifically sand tables, can produce highly effective systems at relatively low

  2. Augmented Reality Interfaces for Additive Manufacturing

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Frisvad, Jeppe Revall

    2017-01-01

    This paper explores potential use cases for using augmented reality (AR) as a tool to operate industrial machines. As a baseline we use an additive manufacturing system, more commonly known as a 3D printer. We implement novel augmented interfaces and controls using readily available open source...

  3. Enhancing Education through Mobile Augmented Reality

    Science.gov (United States)

    Joan, D. R. Robert

    2015-01-01

    In this article, the author has discussed about the Mobile Augmented Reality and enhancing education through it. The aim of the present study was to give some general information about mobile augmented reality which helps to boost education. Purpose of the current study reveals the mobile networks which are used in the institution campus as well…

  4. Age grouping to optimize augmentation success.

    Science.gov (United States)

    Gordon, Robert W

    2010-05-01

    This article has described the different age groups that present for noninvasive injectable lip and perioral augmentation, as well as the breakdown of 3 subgroups that present within the 4 general age groups. With the fundamental understanding of these presenting groups and subgroups, the practicing augmenter will be able to better treatment plan and educate the patient on realistic and optimal aesthetic outcomes.

  5. From Augmentation Media to Meme Media.

    Science.gov (United States)

    Tanaka, Yuzuru

    Computers as meta media are now evolving from augmentation media vehicles to meme media vehicles. While an augmentation media system provides a seamlessly integrated environment of various tools and documents, meme media system provides further functions to edit and distribute tools and documents. Documents and tools on meme media can easily…

  6. Aspects of User Experience in Augmented Reality

    DEFF Research Database (Denmark)

    Madsen, Jacob Boesen

    in human factors related to Augmented Reality. This is investigated partly as how Augmented Reality applications are used in unsupervised settings, and partly in specific evaluations related to user performance in supervised settings. The thesis starts by introducing Augmented Reality to the reader......, followed by a presentation of the technical areas related to the field, and different human factor areas. As a contribution to the research area, this thesis presents five separate, but sequential, papers within the area of Augmented Reality.......In Augmented Reality applications, the real environment is annotated or enhanced with computer-generated graphics. This is a topic that has been researched in the recent decades, but for many people this is a brand new and never heard of topic. The main focus of this thesis is investigations...

  7. Novel Augmentation Strategies in Major Depression

    DEFF Research Database (Denmark)

    Martiny, Klaus

    2017-01-01

    Hypothesis The hypotheses of all the four included studies share the common idea that it is possible to augment the effect of antidepressant drug treatment by applying different interventions and with each intervention attain a clinically meaningful better effect compared to a control condition...... and randomised to augmentation with either active or placebo matching pindolol tablets. In the PEMF study patients were continued on ongoing medication and randomised to augmentation with active or inactive (sham) 30 minutes daily PEMF treatment on weekdays. In the Chronos study all patients were treated...... The results from the Pindolol study showed that pindolol did not augment the effect of venlafaxine for the whole sample. However, for those patients classified as slow metabolizers, based on their O-desmethylvenlafaxine/venlafaxine ratio (ODV/V), pindolol did augment the antidepressant effect. For patients...

  8. Performance of a self-augmented railgun

    International Nuclear Information System (INIS)

    Burton, R.L.; Witherspoon, F.D.; Goldstein, S.A.

    1991-01-01

    The accelerating force of a railgun 1/2L'I 2 a can be increased by augmenting the self-induced magnetic field created by the armature current. Augmentation fields can be produced by external current coils or, as is done here, by shorting the railgun muzzle, and using the gun rails as the augmentation coil. Experimental results are presented for a 3.6-m railgun operated in this self-augmented mode, and effective inductance gradients are achieved which are as much as 9.3 times that of the unaugmented gun. A circuit model is presented which explains features of the measured shunt current and voltage. It is concluded that self-augmentation is an effective way to reduce ohmic heating in the armature of a railgun

  9. Genetic Augmentation of Syringyl Lignin in Low-lignin Aspen Trees, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Chung-Jui Tsai; Mark F. Davis; Vincent L. Chiang

    2004-11-10

    As a polysaccharide-encrusting component, lignin is critical to cell wall integrity and plant growth but also hinders recovery of cellulose fibers during the wood pulping process. To improve pulping efficiency, it is highly desirable to genetically modify lignin content and/or structure in pulpwood species to maximize pulp yields with minimal energy consumption and environmental impact. This project aimed to genetically augment the syringyl-to-guaiacyl lignin ratio in low-lignin transgenic aspen in order to produce trees with reduced lignin content, more reactive lignin structures and increased cellulose content. Transgenic aspen trees with reduced lignin content have already been achieved, prior to the start of this project, by antisense downregulation of a 4-coumarate:coenzyme A ligase gene (Hu et al., 1999 Nature Biotechnol 17: 808- 812). The primary objective of this study was to genetically augment syringyl lignin biosynthesis in these low-lignin trees in order to enhance lignin reactivity during chemical pulping. To accomplish this, both aspen and sweetgum genes encoding coniferaldehyde 5-hydroxylase (Osakabe et al., 1999 PNAS 96: 8955-8960) were targeted for over-expression in wildtype or low-lignin aspen under control of either a constitutive or a xylem-specific promoter. A second objective for this project was to develop reliable and cost-effective methods, such as pyrolysis Molecular Beam Mass Spectrometry and NMR, for rapid evaluation of cell wall chemical components of transgenic wood samples. With these high-throughput techniques, we observed increased syringyl-to-guaiacyl lignin ratios in the transgenic wood samples, regardless of the promoter used or gene origin. Our results confirmed that the coniferaldehyde 5-hydroxylase gene is key to syringyl lignin biosynthesis. The outcomes of this research should be readily applicable to other pulpwood species, and promise to bring direct economic and environmental benefits to the pulp and paper industry.

  10. Weight Loss Composition is One-Fourth Fat-Free Mass: A Critical Review and Critique of This Widely Cited Rule

    Science.gov (United States)

    Heymsfield, Steven B.; Cristina Gonzalez, M. C.; Shen, Wei; Redman, Leanne; Thomas, Diana

    2014-01-01

    Maximizing fat loss while preserving lean tissue mass and function is a central goal of modern obesity treatments. A widely cited rule guiding expected loss of lean tissue as fat-free mass (FFM) states that approximately one-fourth of weight loss will be FFM (i.e., ΔFFM/ΔWeight = ~0.25) with the remaining three-fourths fat mass. This review examines the dynamic relations between FFM, fat mass, and weight changes that follow induction of negative energy balance with hypocaloric dieting and/or exercise. Historical developments in the field are traced with the “Quarter FFM Rule” used as a framework to examine evolving concepts on obesity tissue, excess weight, and what is often cited as “Forbes’ Rule”. Temporal effects in the fractional contribution of FFM to changes in body weight are examined as are lean tissue moderating effects such as aging, inactivity, and exercise that frequently accompany structured low-calorie diet weight loss protocols. Losses of lean tissue with dieting typically tend to be small, raising questions about study design, power, and applied measurement method reliability. Our review elicits important questions related to the fractional loss of lean tissues with dieting and provides a foundation for future research on this topic. PMID:24447775

  11. A critical assessment of the performance criteria in confirmatory analysis for veterinary drug residue analysis using mass spectrometric detection in selected reaction monitoring mode

    NARCIS (Netherlands)

    Berendsen, Bjorn J.A.; Meijer, Thijs; Wegh, Robin; Mol, Hans G.J.; Smyth, Wesley G.; Armstrong Hewitt, S.; Ginkel, van Leen; Nielen, Michel W.F.

    2016-01-01

    Besides the identification point system to assure adequate set-up of instrumentation, European Commission Decision 2002/657/EC includes performance criteria regarding relative ion abundances in mass spectrometry and chromatographic retention time. In confirmatory analysis, the relative abundance

  12. Augmented nonlinear differentiator design and application to nonlinear uncertain systems.

    Science.gov (United States)

    Shao, Xingling; Liu, Jun; Li, Jie; Cao, Huiliang; Shen, Chong; Zhang, Xiaoming

    2017-03-01

    In this paper, an augmented nonlinear differentiator (AND) based on sigmoid function is developed to calculate the noise-less time derivative under noisy measurement condition. The essential philosophy of proposed AND in achieving high attenuation of noise effect is established by expanding the signal dynamics with extra state variable representing the integrated noisy measurement, then with the integral of measurement as input, the augmented differentiator is formulated to improve the estimation quality. The prominent advantages of the present differentiation technique are: (i) better noise suppression ability can be achieved without appreciable delay; (ii) the improved methodology can be readily extended to construct augmented high-order differentiator to obtain multiple derivatives. In addition, the convergence property and robustness performance against noises are investigated via singular perturbation theory and describing function method, respectively. Also, comparison with several classical differentiators is given to illustrate the superiority of AND in noise suppression. Finally, the robust control problems of nonlinear uncertain systems, including a numerical example and a mass spring system, are addressed to demonstrate the effectiveness of AND in precisely estimating the disturbance and providing the unavailable differential estimate to implement output feedback based controller. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  13. Chapter 2. Surge capacity and infrastructure considerations for mass critical care. Recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza epidemic or mass disaster

    NARCIS (Netherlands)

    Hick, John L.; Christian, Michael D.; Sprung, Charles L.; Camargo, Ruben; Ceraso, Daniel; Azoulay, Elie; Duguet, Alexandre; Guery, Benoit; Reinhart, Konrad; Adini, Bruria; Barlavie, Yaron; Benin-Goren, Odeda; Cohen, Robert; Klein, Motti; Leoniv, Yuval; Margalit, Gila; Rubinovitch, Bina; Sonnenblick, Moshe; Steinberg, Avraham; Weissman, Charles; Wolff, Donna; Kesecioglu, Jozef; de Jong, Menno; Moreno, Rui; An, Youzhong; Du, Bin; Joynt, Gavin M.; Colvin, John; Loo, Shi; Richards, Guy; Artigas, Antonio; Pugin, Jerome; Amundson, Dennis; Devereaux, Asha; Beigel, John; Danis, Marion; Farmer, Chris; Maki, Dennis; Masur, Henry; Rubinson, Lewis; Sandrock, Christian; Talmor, Daniel; Truog, Robert; Zimmerman, Janice; Brett, Steve; Montgomery, Hugh; Rhodes, Andrew; Sanderson, Frances; Taylor, Bruce; Monrgomery, Hugh

    2010-01-01

    To provide recommendations and standard operating procedures for intensive care unit (ICU) and hospital preparations for a mass disaster or influenza epidemic with a specific focus on surge capacity and infrastructure considerations. Based on a literature review and expert opinion, a Delphi process

  14. Comment on critical instability

    International Nuclear Information System (INIS)

    King, S.F.; Suzuki, Mahiko

    1992-01-01

    We discuss the problem of the mass splitting between top and bottom quarks, within the context of Nambu-Jona-Lasinio type models involving top and bottom quark condensates. We interpret the phenomenon of 'critical instability' recently proposed to account for such a mass splitting as the fine-tuning of two vacuum expectation values in a composite two-Higgs doublet model. (orig.)

  15. Digital Augmented Reality Audio Headset

    Directory of Open Access Journals (Sweden)

    Jussi Rämö

    2012-01-01

    Full Text Available Augmented reality audio (ARA combines virtual sound sources with the real sonic environment of the user. An ARA system can be realized with a headset containing binaural microphones. Ideally, the ARA headset should be acoustically transparent, that is, it should not cause audible modification to the surrounding sound. A practical implementation of an ARA mixer requires a low-latency headphone reproduction system with additional equalization to compensate for the attenuation and the modified ear canal resonances caused by the headphones. This paper proposes digital IIR filters to realize the required equalization and evaluates a real-time prototype ARA system. Measurements show that the throughput latency of the digital prototype ARA system can be less than 1.4 ms, which is sufficiently small in practice. When the direct and processed sounds are combined in the ear, a comb filtering effect is brought about and appears as notches in the frequency response. The comb filter effect in speech and music signals was studied in a listening test and it was found to be inaudible when the attenuation is 20 dB. Insert ARA headphones have a sufficient attenuation at frequencies above about 1 kHz. The proposed digital ARA system enables several immersive audio applications, such as a virtual audio tourist guide and audio teleconferencing.

  16. Augmented reality for personalized nanomedicines.

    Science.gov (United States)

    Lee, Yugyung; Lee, Chi H

    As our understanding of onset and progress of diseases at the genetic and molecular level rapidly progresses, the potential of advanced technologies, such as 3D-printing, Socially-Assistive Robots (SARs) or augmented reality (AR), that are applied to personalized nanomedicines (PNMs) to alleviate pathological conditions, has become more prominent. Among advanced technologies, AR in particular has the greatest potential to address those challenges and facilitate the translation of PNMs into formidable clinical application of personalized therapy. As AR is about to adapt additional new methods, such as speech, voice recognition, eye tracing and motion tracking, to enable interaction with host response or biological systems in 3-D space, a combination of multiple approaches to accommodate varying environmental conditions, such as public noise and atmosphere brightness, will be explored to improve its therapeutic outcomes in clinical applications. For instance, AR glasses still being developed by Facebook or Microsoft will serve as new platform that can provide people with the health information they are interested in or various measures through which they can interact with medical services. This review has addressed the current progress and impact of AR on PNMs and its application to the biomedical field. Special emphasis is placed on the application of AR based PNMs to the treatment strategies against senior care, drug addiction and medication adherence. Published by Elsevier Inc.

  17. Display technologies for augmented reality

    Science.gov (United States)

    Lee, Byoungho; Lee, Seungjae; Jang, Changwon; Hong, Jong-Young; Li, Gang

    2018-02-01

    With the virtue of rapid progress in optics, sensors, and computer science, we are witnessing that commercial products or prototypes for augmented reality (AR) are penetrating into the consumer markets. AR is spotlighted as expected to provide much more immersive and realistic experience than ordinary displays. However, there are several barriers to be overcome for successful commercialization of AR. Here, we explore challenging and important topics for AR such as image combiners, enhancement of display performance, and focus cue reproduction. Image combiners are essential to integrate virtual images with real-world. Display performance (e.g. field of view and resolution) is important for more immersive experience and focus cue reproduction may mitigate visual fatigue caused by vergence-accommodation conflict. We also demonstrate emerging technologies to overcome these issues: index-matched anisotropic crystal lens (IMACL), retinal projection displays, and 3D display with focus cues. For image combiners, a novel optical element called IMACL provides relatively wide field of view. Retinal projection displays may enhance field of view and resolution of AR displays. Focus cues could be reconstructed via multi-layer displays and holographic displays. Experimental results of our prototypes are explained.

  18. Wireless Augmented Reality Prototype (WARP)

    Science.gov (United States)

    Devereaux, A. S.

    1999-01-01

    Initiated in January, 1997, under NASA's Office of Life and Microgravity Sciences and Applications, the Wireless Augmented Reality Prototype (WARP) is a means to leverage recent advances in communications, displays, imaging sensors, biosensors, voice recognition and microelectronics to develop a hands-free, tetherless system capable of real-time personal display and control of computer system resources. Using WARP, an astronaut may efficiently operate and monitor any computer-controllable activity inside or outside the vehicle or station. The WARP concept is a lightweight, unobtrusive heads-up display with a wireless wearable control unit. Connectivity to the external system is achieved through a high-rate radio link from the WARP personal unit to a base station unit installed into any system PC. The radio link has been specially engineered to operate within the high- interference, high-multipath environment of a space shuttle or space station module. Through this virtual terminal, the astronaut will be able to view and manipulate imagery, text or video, using voice commands to control the terminal operations. WARP's hands-free access to computer-based instruction texts, diagrams and checklists replaces juggling manuals and clipboards, and tetherless computer system access allows free motion throughout a cabin while monitoring and operating equipment.

  19. Augmented Reality: Daily Prayers for Preschooler Student

    OpenAIRE

    Hendra Pradibta

    2018-01-01

    Education is one of the aspects that many synthesized with technology. Yet, this is contrary to the fact that where most of the learning materials are still based on text. This research aims to develop an alternative learning media by implementing Augmented Reality Technology for Preschooler students. Augmented Reality (AR) is an application that can combine the virtual object as text, pictures and animation into the real world. Development of Augmented Reality application uses Web Aurasma Ba...

  20. Determination of student opinions in augmented reality

    Directory of Open Access Journals (Sweden)

    Huseyin Bicen

    2016-11-01

    Full Text Available The rapid development of the new technology has changed classroom teaching methods and tools in a positive way. This study investigated the classroom learning with augmented reality and the impact of student opinions. 97 volunteer undergraduate students took part in this study. Results included data in the form of frequencies, percentages and descriptive statistics. The results show that, with gamification methods, augmented reality content affected students’ opinions in a positive way. When QR codes are used in the classroom, students feel independent from classroom materials and can access various resources. Moreover, students think that, when augmented reality in the classroom is used, education is more enjoyable.

  1. Remaining Sites Verification Package for the 600-111, P-11 Critical Mass Laboratory Crib, and UPR-600-16, Fire and Contamination Spread Waste Sites. Attachment to Waste Site Reclassification Form 2004-065

    International Nuclear Information System (INIS)

    Capron, J.M.

    2008-01-01

    The 600-111, P-11 Critical Mass Laboratory Crib waste site, also referred to as the P-11 Facility, included the 120 Experimental Building, the 123 Control Building, and the P-11 Crib. The facility was constructed in 1949 and was used as a laboratory for plutonium criticality studies. In accordance with this evaluation, the confirmatory and verification sampling results support a reclassification of this site to Interim Closed Out. The results of confirmatory and verification sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River

  2. Mechanism of transient force augmentation varying with two distinct timescales for interacting vortex rings

    Science.gov (United States)

    Fu, Zhidong; Qin, Suyang; Liu, Hong

    2014-01-01

    The dynamics of dual vortex ring flows is studied experimentally and numerically in a model system that consists of a piston-cylinder apparatus. The flows are generated by double identical strokes which have the velocity profile characterized by the sinusoidal function of half the period. By calculating the total wake impulse in two strokes in the experiments, it is found that the average propulsive force increases by 50% in the second stroke for the sufficiently small stroke length, compared with the first stroke. In the numerical simulations, two types of transient force augmentation are revealed, there being the transient force augmentation for the small stroke lengths and the absolute transient force augmentation for the large stroke lengths. The relative transient force augmentation increases to 78% for L/D = 1, while the absolute transient force augmentation for L/D = 4 is twice as much as that for L/D = 1. Further investigation demonstrates that the force augmentation is attributed to the interaction between vortex rings, which induces transport of vortex impulse and more evident fluid entrainment. The critical situation of vortex ring separation is defined and indicated, with vortex spacing falling in a narrow gap when the stroke lengths vary. A new model is proposed concerning the limiting process of impulse, further suggesting that apart from vortex formation timescale, vortex spacing should be interpreted as an independent timescale to reflect the dynamics of vortex interaction.

  3. Alien Contact!: Exploring Teacher Implementation of an Augmented Reality Curricular Unit

    Science.gov (United States)

    Mitchell, Rebecca

    2011-01-01

    This paper reports on findings from a five-teacher, exploratory case study, critically observing their implementation of a technology-intensive, augmented reality (AR) mathematics curriculum unit, along with its paper-based control. The unit itself was intended to promote multiple proportional-reasoning strategies with urban, public, middle school…

  4. Applied Augmented Reality for High Precision Maintenance

    Science.gov (United States)

    Dever, Clark

    Augmented Reality had a major consumer breakthrough this year with Pokemon Go. The underlying technologies that made that app a success with gamers can be applied to improve the efficiency and efficacy of workers. This session will explore some of the use cases for augmented reality in an industrial environment. In doing so, the environmental impacts and human factors that must be considered will be explored. Additionally, the sensors, algorithms, and visualization techniques used to realize augmented reality will be discussed. The benefits of augmented reality solutions in industrial environments include automated data recording, improved quality assurance, reduction in training costs and improved mean-time-to-resolution. As technology continues to follow Moore's law, more applications will become feasible as performance-per-dollar increases across all system components.

  5. Augmented Reality Simulations on Handheld Computers

    Science.gov (United States)

    Squire, Kurt; Klopfer, Eric

    2007-01-01

    Advancements in handheld computing, particularly its portability, social interactivity, context sensitivity, connectivity, and individuality, open new opportunities for immersive learning environments. This article articulates the pedagogical potential of augmented reality simulations in environmental engineering education by immersing students in…

  6. Affordances in Mobile Augmented Reality Applications

    Directory of Open Access Journals (Sweden)

    Tor Gjøsæter

    2014-10-01

    Full Text Available This paper explores the affordances of augmented reality content in a mobile augmented reality application. A user study was conducted by performing a multi-camera video recording of seven think aloud sessions. The think aloud sessions consisted of individual users performing tasks, exploring and experiencing a mobile augmented reality (MAR application we developed for the iOS platform named ARad. We discuss the instrumental affordances we observed when users interacted with augmented reality content, as well as more complex affordances rising from conventions from media content, AR and the traditional WIMP paradigm. We find that remediation of traditional newspaper content through the MAR medium can provide engaging, pleasing and exciting user experiences. However, the some of the content still suffers from being shoveled onto the MAR platform without adapting it properly. Finally, we discuss what content was most successfully mediated to the user and how the content impacts the user experience.

  7. Muzzle shunt augmentation of conventional railguns

    International Nuclear Information System (INIS)

    Parker, J.V.

    1991-01-01

    This paper reports on augmentation which is a technique for reducing the armature current and hence the armature power dissipation in a plasma armature railgun. In spite of the advantages, no large augmented railguns have been built, primarily due to the mechanical and electrical complexity introduced by the extra conductors required. it is possible to achieve some of the benefits of augmentation in a conventional railgun by diverting a fraction φ of the input current through a shunt path at the muzzle of the railgun. In particular, the relation between force and armature current is the same as that obtained in an n-turn, series-connected augmented railgun with n = 1/(1 - φ). The price of this simplification is a reduction in electrical efficiency and some additional complexity in the external electrical system

  8. Augmenting the Web through Open Hypermedia

    DEFF Research Database (Denmark)

    Bouvin, N.O.

    2003-01-01

    Based on an overview of Web augmentation and detailing the three basic approaches to extend the hypermedia functionality of the Web, the author presents a general open hypermedia framework (the Arakne framework) to augment the Web. The aim is to provide users with the ability to link, annotate, a......, and otherwise structure Web pages, as they see fit. The paper further discusses the possibilities of the concept through the description of various experiments performed with an implementation of the framework, the Arakne Environment......Based on an overview of Web augmentation and detailing the three basic approaches to extend the hypermedia functionality of the Web, the author presents a general open hypermedia framework (the Arakne framework) to augment the Web. The aim is to provide users with the ability to link, annotate...

  9. Global Navigation Satellite System and Augmentation

    Indian Academy of Sciences (India)

    aircraft-based augmentation system (ABAS). ... segment, the ground segment (or) control segment and the user segment ... control station (MCS), and ground antennas. ... repeatability, multipath rejection, size, profile, and environmental.

  10. Improved diffuser for augmenting a wind turbine

    Science.gov (United States)

    Foreman, K.M.; Gilbert, B.L.

    A diffuser for augmenting a wind turbine having means for energizing the boundary layer at several locations along the diffuser walls is improved by the addition of a short collar extending radially outward from the outlet of the diffuser.

  11. Fiber Optic Augmented Reality System (FOARS)

    Data.gov (United States)

    National Aeronautics and Space Administration — Innovation: Fiber Optics Augmented Reality System. This system in form of a mobile app interacts real time with the actual FOSS(Fiber Optics Sensing System) data and...

  12. Thrust augmentation for a small turbojet engine

    OpenAIRE

    Hackaday, Gary L.

    1999-01-01

    Approved for public release; distribution is unlimited A Sophia J450 (nine pounds of thrust) gas turbine engine was used first to examine the thrust augmentation generated using an ejector shroud. Experimental results obtained with and without the ejector were compared with performance predicted using an engine code and a one-dimensional ejector analysis. The engine code was revised to incorporate a radial turbine and the correct compressor map. Thrust augmentation of 3-10% was measured an...

  13. Dermal fillers for facial soft tissue augmentation.

    Science.gov (United States)

    Dastoor, Sarosh F; Misch, Carl E; Wang, Hom-Lay

    2007-01-01

    Nowadays, patients are demanding not only enhancement to their dental (micro) esthetics, but also their overall facial (macro) esthetics. Soft tissue augmentation via dermal filling agents may be used to correct facial defects such as wrinkles caused by age, gravity, and trauma; thin lips; asymmetrical facial appearances; buccal fold depressions; and others. This article will review the pathogenesis of facial wrinkles, history, techniques, materials, complications, and clinical controversies regarding dermal fillers for soft tissue augmentation.

  14. Breaking the Barriers to True Augmented Reality

    OpenAIRE

    Sandor, Christian; Fuchs, Martin; Cassinelli, Alvaro; Li, Hao; Newcombe, Richard; Yamamoto, Goshiro; Feiner, Steven

    2015-01-01

    In recent years, Augmented Reality (AR) and Virtual Reality (VR) have gained considerable commercial traction, with Facebook acquiring Oculus VR for \\$2 billion, Magic Leap attracting more than \\$500 million of funding, and Microsoft announcing their HoloLens head-worn computer. Where is humanity headed: a brave new dystopia-or a paradise come true? In this article, we present discussions, which started at the symposium "Making Augmented Reality Real", held at Nara Institute of Science and Te...

  15. Integrating Hypermedia Techniques with Augmented Reality Environments

    OpenAIRE

    Sinclair, Patrick

    2004-01-01

    Augmented Reality systems, which overlay virtual information over the real world, can benefit greatly from the techniques established by the Open Hypermedia research field. Storing information and links separately from a document can be advantageous for augmented reality applications and can enable the adaption of content to suit users’ preferences. This thesis explores how Open Hypermedia systems might be used as the information systems behind AR environments. This provides benefits to augme...

  16. Analysis of air mass trajectories to explain observed variability of tritium in precipitation at the Southern Sierra Critical Zone Observatory, California, USA.

    Science.gov (United States)

    Visser, Ate; Thaw, Melissa; Esser, Brad

    2018-01-01

    Understanding the behavior of tritium, a radioactive isotope of hydrogen, in the environment is important to evaluate the exposure risk of anthropogenic releases, and for its application as a tracer in hydrology and oceanography. To understand and predict the variability of tritium in precipitation, HYSPLIT air mass trajectories were analyzed for 16 aggregate precipitation samples collected over a 2 year period at irregular intervals at a research site located at 2000 m elevation in the southern Sierra Nevada (California, USA). Attributing the variation in tritium to specific source areas confirms the hypothesis that higher latitude or inland sources bring higher tritium levels in precipitation than precipitation originating in the lower latitude Pacific Ocean. In this case, the source of precipitation accounts for 79% of the variation observed in tritium concentrations. Air mass trajectory analysis is a promising tool to improve the predictions of tritium in precipitation at unmonitored locations and thoroughly understand the processes controlling transport of tritium in the environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Augmented reality implementation methods in mainstream applications

    Directory of Open Access Journals (Sweden)

    David Procházka

    2011-01-01

    Full Text Available Augmented reality has became an useful tool in many areas from space exploration to military applications. Although used theoretical principles are well known for almost a decade, the augmented reality is almost exclusively used in high budget solutions with a special hardware. However, in last few years we could see rising popularity of many projects focused on deployment of the augmented reality on dif­ferent mobile devices. Our article is aimed on developers who consider development of an augmented reality application for the mainstream market. Such developers will be forced to keep the application price, therefore also the development price, at reasonable level. Usage of existing image processing software library could bring a significant cut-down of the development costs. In the theoretical part of the article is presented an overview of the augmented reality application structure. Further, an approach for selection appropriate library as well as the review of the existing software libraries focused in this area is described. The last part of the article out­lines our implementation of key parts of the augmented reality application using the OpenCV library.

  18. Empirical evaluation of augmented prototyping effectiveness

    Directory of Open Access Journals (Sweden)

    Tomáš Koubek

    2012-01-01

    Full Text Available Augmented reality is a scientific field well known for more than twenty years. Although there is a huge number of projects that present promising results, the real usage of augmented reality applications for fulfilling common tasks is almost negligible. We believe that one of the principal reasons is insufficient usability of these applications. The situation is analogous to the desktop, mobile or cloud application development or even to the web pages design. The first phase of a technology adoption is the exploration of its potential. As soon as the technical problems are overcome and the technology is widely accepted, the usability is a principal issue. The usability is utmost important also from the business point of view. The cost of augmented reality implementation into the production process is substantial, therefore, the usability that is directly responsible for the implemented solution effectiveness must be appropriately tested. Consequently, the benefit of the implemented solution can be measured.This article briefly outlines common techniques used for usability evaluation. Discussed techniques were designed especially for evaluation of desktop applications, mobile solutions and web pages. In spite of this drawback, their application on augmented reality products is usually possible. Further, a review of existing augmented reality project evaluations is presented.Based on this review, a usability evaluation method for our augmented prototyping application is proposed. This method must overcome the fact that the design is a creative process. Therefore, it is not possible to take into account common criteria such as time consumption.

  19. Augmented Fotonovelas: A Visual Methodology for Community Engaged Research

    OpenAIRE

    Hidalgo, LeighAnna Grace

    2014-01-01

    Augmented Fotonovelas draw upon the aesthetic of traditional fotonovelas, but incorporate new technologies--such as video interviews, interactive mapping, smart phone technology, and Augmented Reality (AR). Augmented Fotonovelas also make the most of the classic form, utilizing photographs, text, and bubble captions. Through this methodology, new and old come together to produce Augmented Scholarship. I define Augmented Scholarship as knowledge production bridging the gap between communities ...

  20. Percussive Augmenter of Rotary Drills for Operating as a Rotary-Hammer Drill

    Science.gov (United States)

    Aldrich, Jack Barron (Inventor); Bar-Cohen, Yoseph (Inventor); Sherrit, Stewart (Inventor); Badescu, Mircea (Inventor); Bao, Xiaoqi (Inventor); Scott, James Samson (Inventor)

    2014-01-01

    A percussive augmenter bit includes a connection shaft for mounting the bit onto a rotary drill. In a first modality, an actuator percussively drives the bit, and an electric slip-ring provides power to the actuator while being rotated by the drill. Hammering action from the actuator and rotation from the drill are applied directly to material being drilled. In a second modality, a percussive augmenter includes an actuator that operates as a hammering mechanism that drives a free mass into the bit creating stress pulses that fracture material that is in contact with the bit.

  1. ARSC: Augmented Reality Student Card--An Augmented Reality Solution for the Education Field

    Science.gov (United States)

    El Sayed, Neven A. M.; Zayed, Hala H.; Sharawy, Mohamed I.

    2011-01-01

    Augmented Reality (AR) is the technology of adding virtual objects to real scenes through enabling the addition of missing information in real life. As the lack of resources is a problem that can be solved through AR, this paper presents and explains the usage of AR technology we introduce Augmented Reality Student Card (ARSC) as an application of…

  2. Augmented “Ouch!”. : How to create intersubjective augmented objects into which we can bump

    NARCIS (Netherlands)

    Liberati, Nicola

    2015-01-01

    The aim of this work is to provide the elements to design an intersubjective augmented reality in order to make the augmented objects part of our everyday world. This work will analyse intersubjectivity from a phenomenological point of view using the works by Husserl and Schutz. Thanks to these two

  3. Augmented reality and ubiquitous computing : The hidden potentialities of augmented reality

    NARCIS (Netherlands)

    Liberati, Nicola

    2016-01-01

    The aim of this paper was to highlight the augmented reality’s potentialities, depicting its main characteristics and focusing attention on what its goal should be in order to have a new technology completely different from those that already exist. From a technological point of view, augmented

  4. Trilinear-augmented gaugino mediation

    Energy Technology Data Exchange (ETDEWEB)

    Heisig, Jan [Institute for Theoretical Particle Physics and Cosmology, RWTH Aachen University,52056 Aachen (Germany); Kersten, Jörn [Department of Physics and Technology, University of Bergen,5020 Bergen (Norway); Murphy, Nick [CP-Origins, University of Southern Denmark,5230 Odense M (Denmark); Strümke, Inga [Department of Physics and Technology, University of Bergen,5020 Bergen (Norway)

    2017-05-02

    We consider a gaugino-mediated supersymmetry breaking scenario where in addition to the gauginos the Higgs fields couple directly to the field that breaks supersymmetry. This yields non-vanishing trilinear scalar couplings in general, which can lead to large mixing in the stop sector providing a sufficiently large Higgs mass. Using the most recent release of FeynHiggs, we show the implications on the parameter space. Assuming a gravitino LSP, we find allowed points with a neutralino, sneutrino or stau NLSP. We test these points against the results of Run 1 of the LHC, considering in particular searches for heavy stable charged particles.

  5. Trilinear-augmented gaugino mediation

    International Nuclear Information System (INIS)

    Heisig, Jan; Kersten, Jörn; Murphy, Nick; Strümke, Inga

    2017-01-01

    We consider a gaugino-mediated supersymmetry breaking scenario where in addition to the gauginos the Higgs fields couple directly to the field that breaks supersymmetry. This yields non-vanishing trilinear scalar couplings in general, which can lead to large mixing in the stop sector providing a sufficiently large Higgs mass. Using the most recent release of FeynHiggs, we show the implications on the parameter space. Assuming a gravitino LSP, we find allowed points with a neutralino, sneutrino or stau NLSP. We test these points against the results of Run 1 of the LHC, considering in particular searches for heavy stable charged particles.

  6. A CRITICAL LOOK AT THE MASS-METALLICITY-STAR FORMATION RATE RELATION IN THE LOCAL UNIVERSE. I. AN IMPROVED ANALYSIS FRAMEWORK AND CONFOUNDING SYSTEMATICS

    Energy Technology Data Exchange (ETDEWEB)

    Salim, Samir; Salzer, John J. [Department of Astronomy, Indiana University, Bloomington, IN 47404 (United States); Lee, Janice C. [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Ly, Chun [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Brinchmann, Jarle [Leiden Observatory, Leiden University, NL-2300 RA Leiden (Netherlands); Davé, Romeel [University of the Western Cape, Bellville, Cape Town 7535 (South Africa); Dickinson, Mark [National Optical Astronomy Observatory, Tucson, AZ 85719 (United States); Charlot, Stéphane, E-mail: salims@indiana.edu [Institut d' Astrophysique de Paris, CNRS, F-75014 Paris (France)

    2014-12-20

    It has been proposed that the (stellar) mass-(gas) metallicity relation of galaxies exhibits a secondary dependence on star formation rate (SFR), and that the resulting M {sub *}-Z-SFR relation may be redshift-invariant, i.e., ''fundamental''. However, conflicting results on the character of the SFR dependence, and whether it exists, have been reported. To gain insight into the origins of the conflicting results, we (1) devise a non-parametric, astrophysically motivated analysis framework based on the offset from the star-forming ({sup m}ain{sup )} sequence at a given M {sub *} (relative specific SFR); (2) apply this methodology and perform a comprehensive re-analysis of the local M {sub *}-Z-SFR relation, based on SDSS, GALEX, and WISE data; and (3) study the impact of sample selection and of using different metallicity and SFR indicators. We show that metallicity is anti-correlated with specific SFR regardless of the indicators used. We do not find that the relation is spurious due to correlations arising from biased metallicity measurements or fiber aperture effects. We emphasize that the dependence is weak/absent for massive galaxies (log M {sub *} > 10.5), and that the overall scatter in the M {sub *}-Z-SFR relation does not greatly decrease from the M {sub *}-Z relation. We find that the dependence is stronger for the highest SSFR galaxies above the star-forming sequence. This two-mode behavior can be described with a broken linear fit in 12+log(O/H) versus log (SFR/M {sub *}), at a given M {sub *}. Previous parameterizations used for comparative analysis with higher redshift samples that do not account for the more detailed behavior of the local M {sub *}-Z-SFR relation may incorrectly lead to the conclusion that those samples follow a different relationship.

  7. Augment-type two stage accelerator

    International Nuclear Information System (INIS)

    Ogino, Mutsuo; Azuma, Kingo.

    1995-01-01

    When a flying body accelerated by a gas gun at a first stage enters into an augment rail passing through an introduction tube, an ignition capacitor for initial plasmas is turned ON to apply a voltage between the augment rails. Subsequently, the accelerating gas present behind the flying body is formed into plasmas by a laser, to flow electric current from one of the inner augment rails → plasma armature → the other of the inner augment rails, and additionally accelerate the flying body by Lorentz force formed in this case. Since the plasmas are maintained in a state of higher density than the plasmas obtained by using all of the augment rails, the ignition capacitor for initial plasmas in switched to a power source. As a result, it is possible to flow the maximum current before the plasmas expand, and a large accelerating force and a high magnetic flux density are attained, to improve acceleration performance of the flying body. (N.H.)

  8. Potential costs of breast augmentation mammaplasty.

    Science.gov (United States)

    Schmitt, William P; Eichhorn, Mitchell G; Ford, Ronald D

    2016-01-01

    Augmentation mammaplasty is one of the most common surgical procedures performed by plastic surgeons. The aim of this study was to estimate the cost of the initial procedure and its subsequent complications, as well as project the cost of Food and Drug Administration (FDA)-recommended surveillance imaging. The potential costs to the individual patient and society were calculated. Local plastic surgeons provided billing data for the initial primary silicone augmentation and reoperative procedures. Complication rates used for the cost analysis were obtained from the Allergen Core study on silicone implants. Imaging surveillance costs were considered in the estimations. The average baseline initial cost of silicone augmentation mammaplasty was calculated at $6335. The average total cost of primary breast augmentation over the first decade for an individual patient, including complications requiring reoperation and other ancillary costs, was calculated at $8226. Each decade thereafter cost an additional $1891. Costs may exceed $15,000 over an averaged lifetime, and the recommended implant surveillance could cost an additional $33,750. The potential cost of a breast augmentation, which includes the costs of complications and imaging, is significantly higher than the initial cost of the procedure. Level III, economic and decision analysis study. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  9. Augmented Reality: Daily Prayers for Preschooler Student

    Directory of Open Access Journals (Sweden)

    Hendra Pradibta

    2018-01-01

    Full Text Available Education is one of the aspects that many synthesized with technology. Yet, this is contrary to the fact that where most of the learning materials are still based on text. This research aims to develop an alternative learning media by implementing Augmented Reality Technology for Preschooler students. Augmented Reality (AR is an application that can combine the virtual object as text, pictures and animation into the real world. Development of Augmented Reality application uses Web Aurasma Based Studio, with learning materials of daily prayer for preschool student. The development of the characters and the animations were using Adobe Illustrator and Adobe After Effects. The results of the study showed that technology Augmented Reality can be used as an alternative learning media especially in the learning process in Preschool Al Furqon. This is because the content Augmented Reality in the form of animation can gives more understanding and attention for preschool student to follow the learning process

  10. Nanostructures: A Platform for Brain Repair and Augmentation

    Directory of Open Access Journals (Sweden)

    Ruxandra eVidu

    2014-06-01

    Full Text Available Nanoscale structures have been at the core of research efforts dealing with integration of nanotechnology into novel electronic devices for the last decade. For instance, the unique electrical and optical properties of nanowires, nanotubes and nanocables with vertical orientation, assembled in nanoscale arrays, have been used in many device applications such as sensors that hold the potential to augment brain functions. However, the challenge in creating nanowires/nanotubes or nanocables arrays based sensors lies in making individual electrical connections fitting both the features of the brain and of the nanostructures. This review discusses two of the most important applications of nanostructures in neuroscience. First, the current approaches to create nanowires and nanocable structures are reviewed to critically evaluate their potential of developing unique nanostructure based sensors to improve recording and device performance to reduce noise and the detrimental effect of the interface on the tissue. Second, the implementation of nanomaterials in neurobiological and medical applications will be considered from the brain augmentation perspective. Because the size of nanomaterials is of the same order of magnitude with that of biomolecules, these materials are valuable tools for nanoscale manipulation in a broad range of neurobiological systems. Novel applications for diagnosis and treatment of brain diseases such as multiple sclerosis, meningitis, stroke, epilepsy, Alzheimer disease, schizophrenia, and autism will be considered. Because the blood brain barrier (BBB has a defensive mechanism in preventing nanomaterials arrival to the brain, various strategies to help them to passing through the BBB will be discussed. The nanostructures at the interface between nanotechnology and neuroscience will play a pivotal role not only in addressing the multitude of brain disorders but also to repair/augment brain functions.

  11. Orthobiologics in the augmentation of osteoporotic fractures.

    Science.gov (United States)

    Watson, J Tracy; Nicolaou, Daemeon A

    2015-02-01

    Many orthobiologic adjuvants are available and widely utilized for general skeletal restoration. Their use for the specific task of osteoporotic fracture augmentation is less well recognized. Common conductive materials are reviewed for their value in this patient population including the large group of allograft adjuvants categorically known as the demineralized bone matrices (DBMs). Another large group of alloplastic materials is also examined-the calcium phosphate and sulfate ceramics. Both of these materials, when used for the proper indications, demonstrate efficacy for these patients. The inductive properties of bone morphogenic proteins (BMPs) and platelet concentrates show no clear advantages for this group of patients. Systemic agents including bisphosphonates, receptor activator of nuclear factor κβ ligand (RANKL) inhibitors, and parathyroid hormone augmentation all demonstrate positive effects with this fracture cohort. Newer modalities, such as trace ion bioceramic augmentation, are also reviewed for their positive effects on osteoporotic fracture healing.

  12. Cognitive Cost of Using Augmented Reality Displays.

    Science.gov (United States)

    Baumeister, James; Ssin, Seung Youb; ElSayed, Neven A M; Dorrian, Jillian; Webb, David P; Walsh, James A; Simon, Timothy M; Irlitti, Andrew; Smith, Ross T; Kohler, Mark; Thomas, Bruce H

    2017-11-01

    This paper presents the results of two cognitive load studies comparing three augmented reality display technologies: spatial augmented reality, the optical see-through Microsoft HoloLens, and the video see-through Samsung Gear VR. In particular, the two experiments focused on isolating the cognitive load cost of receiving instructions for a button-pressing procedural task. The studies employed a self-assessment cognitive load methodology, as well as an additional dual-task cognitive load methodology. The results showed that spatial augmented reality led to increased performance and reduced cognitive load. Additionally, it was discovered that a limited field of view can introduce increased cognitive load requirements. The findings suggest that some of the inherent restrictions of head-mounted displays materialize as increased user cognitive load.

  13. Augmented reality-assisted skull base surgery.

    Science.gov (United States)

    Cabrilo, I; Sarrafzadeh, A; Bijlenga, P; Landis, B N; Schaller, K

    2014-12-01

    Neuronavigation is widely considered as a valuable tool during skull base surgery. Advances in neuronavigation technology, with the integration of augmented reality, present advantages over traditional point-based neuronavigation. However, this development has not yet made its way into routine surgical practice, possibly due to a lack of acquaintance with these systems. In this report, we illustrate the usefulness and easy application of augmented reality-based neuronavigation through a case example of a patient with a clivus chordoma. We also demonstrate how augmented reality can help throughout all phases of a skull base procedure, from the verification of neuronavigation accuracy to intraoperative image-guidance. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  14. Novel Augmentation Strategies in Major Depression

    DEFF Research Database (Denmark)

    Martiny, Klaus

    2017-01-01

    open psychiatric wards. Only a few patients were re-cruited through advertisements (in the PEMF and Chronos studies). Inclusion criteria Inclusion criteria were major depression according to the DSM-IV, including a depressive episode as part of a bipolar disorder. For the PEMF study, treatment...... The results from the Pindolol study showed that pindolol did not augment the effect of venlafaxine for the whole sample. However, for those patients classified as slow metabolizers, based on their O-desmethylvenlafaxine/venlafaxine ratio (ODV/V), pindolol did augment the antidepressant effect. For patients...... classified as fast metabolizers, pindolol worsened the outcome. This interaction between ODV/V ratio and treatment group was statistically significant (p = 0.01). Results from the PEMF study The results from the PEMF Study showed that treatment with active versus sham PEMF augmented the effect of the ongoing...

  15. Handling Occlusions for Robust Augmented Reality Systems

    Directory of Open Access Journals (Sweden)

    Maidi Madjid

    2010-01-01

    Full Text Available Abstract In Augmented Reality applications, the human perception is enhanced with computer-generated graphics. These graphics must be exactly registered to real objects in the scene and this requires an effective Augmented Reality system to track the user's viewpoint. In this paper, a robust tracking algorithm based on coded fiducials is presented. Square targets are identified and pose parameters are computed using a hybrid approach based on a direct method combined with the Kalman filter. An important factor for providing a robust Augmented Reality system is the correct handling of targets occlusions by real scene elements. To overcome tracking failure due to occlusions, we extend our method using an optical flow approach to track visible points and maintain virtual graphics overlaying when targets are not identified. Our proposed real-time algorithm is tested with different camera viewpoints under various image conditions and shows to be accurate and robust.

  16. Pemanfaatan Augmented Reality Pada Permainan Othello

    Directory of Open Access Journals (Sweden)

    Rendy Layman Aguston

    2016-11-01

    Full Text Available Perkembangan teknologi telah mengubah cara pengerjaan suatu pekerjaan dari cara konvensional menjadi cara yang lebih praktis. Dengan hadirnya teknologi Augmented Reality, cara bermain yang menggunakan pion dan membalikkan pion musuh secara manual menjadi lebih mudah dalam memainkan permainan selain juga dapat berinteraksi langsung. Pembuatan permainan Othello menggunakan program Unity dengan framework Vuforia untuk mewujudkan Augmented Reality pada permainan Othello. Untuk menerapkan Augmented Reality dengan baik, dibutuhkan papan permainan sebagai image target yang sesuai dengan kriteria, jenis kamera yang digunakan, jarak kamera terhadap papan permainan, intensitas cahaya yang ditangkap kamera, serta tingkat sensitivitas tombol virtual. Pada permainan Othello ini tersedia fitur komputer yang menggunakan algoritma Alpha Beta Pruning dengan 3 level kedalaman yang menggunakan perhitungan fungsi evaluasi berupa mobility, potential mobility dan penguasaan corner yang menghasilkan kemenangan mencapai 73,33% dari 15 kali uji coba terhadap aplikasi Othello serupa dan 78,34% dari 37 kali uji coba terhadap user.

  17. Vitreous humor and albumin augment the proliferation of cultured retinal precursor cells

    DEFF Research Database (Denmark)

    Yang, Jing; Klassen, Henry; Pries, Mette

    2008-01-01

    concentrations of vitreous fluid supplementation was quantified by using a (3)H-thymidine incorporation assay. Active components of vitreous fluid were partially characterized by gel filtration chromatography (GFC) and UV spectral analysis. The effect of each vitreous fraction on proliferation was determined...... Da, consistent with ascorbic acid. Ascorbic acid was confirmed in vitreous fluid by UV spectral analysis. Growth-augmenting activity was present in higher molecular mass vitreous fractions, consistent with protein components. Albumin, the major protein in vitreous fluid, was found to augment...... proliferation. Because vitreous-associated augmentation of retinal precursor proliferation remains an epidermal growth factor-dependent phenomenon, the proliferative status of transplanted cells in the vitreous cavity is likely determined by a combination of factors. (c) 2008 Wiley-Liss, Inc....

  18. Thinking Critically about Critical Thinking

    Science.gov (United States)

    Mulnix, Jennifer Wilson

    2012-01-01

    As a philosophy professor, one of my central goals is to teach students to think critically. However, one difficulty with determining whether critical thinking can be taught, or even measured, is that there is widespread disagreement over what critical thinking actually is. Here, I reflect on several conceptions of critical thinking, subjecting…

  19. NHS-based Tandem Mass Tagging of Proteins at the Level of Whole Cells: A Critical Evaluation in Comparison to Conventional TMT-Labeling Approaches for Quantitative Proteome Analysis.

    Science.gov (United States)

    Megger, Dominik A; Pott, Leona L; Rosowski, Kristin; Zülch, Birgit; Tautges, Stephanie; Bracht, Thilo; Sitek, Barbara

    2017-01-01

    Tandem mass tags (TMT) are usually introduced at the levels of isolated proteins or peptides. Here, for the first time, we report the labeling of whole cells and a critical evaluation of its performance in comparison to conventional labeling approaches. The obtained results indicated that TMT protein labeling using intact cells is generally possible, if it is coupled to a subsequent enrichment using anti-TMT antibody. The quantitative results were similar to those obtained after labeling of isolated proteins and both were found to be slightly complementary to peptide labeling. Furthermore, when using NHS-based TMT, no specificity towards cell surface proteins was observed in the case of cell labeling. In summary, the conducted study revealed first evidence for the general possibility of TMT cell labeling and highlighted limitations of NHS-based labeling reagents. Future studies should therefore focus on the synthesis and investigation of membrane impermeable TMTs to increase specificity towards cell surface proteins.

  20. Heating Augmentation for Short Hypersonic Protuberances

    Science.gov (United States)

    Mazaheri, Ali R.; Wood, William A.

    2008-01-01

    Computational aeroheating analyses of the Space Shuttle Orbiter plug repair models are validated against data collected in the Calspan University of Buffalo Research Center (CUBRC) 48 inch shock tunnel. The comparison shows that the average difference between computed heat transfer results and the data is about 9.5%. Using CFD and Wind Tunnel (WT) data, an empirical correlation for estimating heating augmentation on short hypersonic protuberances (k/delta less than 0.3) is proposed. This proposed correlation is compared with several computed flight simulation cases and good agreement is achieved. Accordingly, this correlation is proposed for further investigation on other short hypersonic protuberances for estimating heating augmentation.

  1. Medical imaging and augmented reality. Proceedings

    International Nuclear Information System (INIS)

    Dohi, Takeyoshi; Sakuma, Ichiro; Liao, Hongen

    2008-01-01

    This book constitutes the refereed proceedings of the 4th International Workshop on Medical Imaging and Augmented Reality, MIAR 2008, held in Tokyo, Japan, in August 2008. The 44 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on surgical planning and simulation, medical image computing, image analysis, shape modeling and morphometry, image-guided robotics, image-guided intervention, interventional imaging, image registration, augmented reality, and image segmentation. (orig.)

  2. Augmented Reality for Maintenance and Repair (ARMAR)

    Science.gov (United States)

    2007-08-01

    implementations by leveraging more robust vision algorithms or by using fiducials. 57 Fi gu re 2 3. A ug m en te d co nt ro ls st at e di ag ra m 58...34 Proceedings of the IEEE Conference on Virtual Reality (VR 󈧇), Washington, DC, 2003, p. 199. [18] W. Friedrich , "ARVIKA-Augmented Reality for...and ACM International Symposium on Mixed and Augmented Reality (ISMAR 󈧊), Santa Barbara , CA, 2006, pp. 105-108. [33] S. G. Rao, S. J. Schmugge

  3. The augmentation algorithm and molecular phylogenetic trees

    Science.gov (United States)

    Holmquist, R.

    1978-01-01

    Moore's (1977) augmentation procedure is discussed, and it is concluded that the procedure is valid for obtaining estimates of the total number of fixed nucleotide substitutions both theoretically and in practice, for both simulated and real data, and in agreement, for experimentally dense data sets, with stochastic estimates of the divergence, provided the restrictions on codon mutability resulting from natural selection are explicitly allowed for. Tateno and Nei's (1978) critique that the augmentation procedure has a systematic bias toward overestimation of the total number of nucleotide replacements is disputed, and a data analysis suggests that ancestral sequences inferred by the method of parsimony contain a large number of incorrectly assigned nucleotides.

  4. Introducing Augmented Reality in Cultural Heritage Studies

    OpenAIRE

    Villarejo, Luis; González-Reverté, Francesc; Miralbell, Oriol; Gomis, Joan Miquel

    2014-01-01

    Augmented Reality is a technology that allows overlaid digital content into our view of the real world through the camera of a Smartphone or a tablet. Video, audio, 2D and 3D images, web and text are just some examples of the type of content that can be overlaid on our perception of the real world. This content can be associated with real world elements by means of geolocation or image recognition. Such technology has great engagement potential and is used in many fields to augment the users’...

  5. Towards Wearable Gaze Supported Augmented Cognition

    DEFF Research Database (Denmark)

    Toshiaki Kurauchi, Andrew; Hitoshi Morimoto, Carlos; Mardanbeigi, Diako

    Augmented cognition applications must deal with the problem of how to exhibit information in an orderly, understandable, and timely fashion. Though context have been suggested to control the kind, amount, and timing of the information delivered, we argue that gaze can be a fundamental tool...... by the wearable computing community to develop a gaze supported augmented cognition application with three interaction modes. The application provides information of the person being looked at. The continuous mode updates information every time the user looks at a different face. The key activated discrete mode...

  6. Medical imaging and augmented reality. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Dohi, Takeyoshi [Tokyo Univ. (Japan). Dept. of Mechano-Informatics; Sakuma, Ichiro [Tokyo Univ. (Japan). Dept. of Precision Engineering; Liao, Hongen (eds.) [Tokyo Univ. (Japan). Dept. of Bioengineering

    2008-07-01

    This book constitutes the refereed proceedings of the 4th International Workshop on Medical Imaging and Augmented Reality, MIAR 2008, held in Tokyo, Japan, in August 2008. The 44 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on surgical planning and simulation, medical image computing, image analysis, shape modeling and morphometry, image-guided robotics, image-guided intervention, interventional imaging, image registration, augmented reality, and image segmentation. (orig.)

  7. Applied Operations Research: Augmented Reality in an Industrial Environment

    Science.gov (United States)

    Cole, Stuart K.

    2015-01-01

    Augmented reality is the application of computer generated data or graphics onto a real world view. Its use provides the operator additional information or a heightened situational awareness. While advancements have been made in automation and diagnostics of high value critical equipment to improve readiness, reliability and maintenance, the need for assisting and support to Operations and Maintenance staff persists. AR can improve the human machine interface where computer capabilities maximize the human experience and analysis capabilities. NASA operates multiple facilities with complex ground based HVCE in support of national aerodynamics and space exploration, and the need exists to improve operational support and close a gap related to capability sustainment where key and experienced staff consistently rotate work assignments and reach their expiration of term of service. The initiation of an AR capability to augment and improve human abilities and training experience in the industrial environment requires planning and establishment of a goal and objectives for the systems and specific applications. This paper explored use of AR in support of Operation staff in real time operation of HVCE and its maintenance. The results identified include identification of specific goal and objectives, challenges related to availability and computer system infrastructure.

  8. Here Comes the Hyper-Connected Augmented Consumer

    Directory of Open Access Journals (Sweden)

    Stephen Andrew T.

    2017-11-01

    Full Text Available Consumers have become always on and constantly connected. Search costs have plummeted, individuals’ abilities to digitally express themselves and their opinions increased, and the opportunities for superior business and market intelligence for companies have skyrocketed. This has given rise to more, richer, and new sources of consumer data that marketers can leverage, and has fueled the data-driven insights revolution in marketing. But there is more to come very soon. In marketing, we are quickly moving from the age of the connected consumer to the age of the augmented consumer. New technologies like wearable devices, smart sensors, consumer IoT devices, smart homes, and, critically, artificial intelligence ecosystems will not only connect, but will substantially and meaningfully augment the consumer in terms of their thoughts and behaviors. The biggest challenge for marketers will lie in how they approach marketing to this new type of consumer, particularly personal artificial intelligence ecosystems. This means marketing to algorithms, instead of people, and that is very different to how most marketing work is currently done.

  9. Ghrelin Serum Concentrations Are Associated with Treatment Response During Lithium Augmentation of Antidepressants.

    Science.gov (United States)

    Ricken, Roland; Bopp, Sandra; Schlattmann, Peter; Himmerich, Hubertus; Bschor, Tom; Richter, Christoph; Elstner, Samuel; Stamm, Thomas J; Schulz-Ratei, Brigitte; Lingesleben, Alexandra; Reischies, Friedel M; Sterzer, Philipp; Borgwardt, Stefan; Bauer, Michael; Heinz, Andreas; Hellweg, Rainer; Lang, Undine E; Adli, Mazda

    2017-09-01

    Lithium augmentation of antidepressants is an effective strategy in treatment-resistant depression. The proteohormone ghrelin is thought to be involved in the pathophysiology of depression. The purpose of this study was to investigate the association of treatment response with the course of ghrelin levels during lithium augmentation. Ghrelin serum concentrations and severity of depression were measured in 85 acute depressive patients before and after 4 weeks of lithium augmentation. In a linear mixed model analysis, we found a significant effect of response*time interaction (F1.81=9.48; P=.0028): under treatment, ghrelin levels increased in nonresponders and slightly decreased in responders to lithium augmentation. The covariate female gender had a significant positive effect (F1.83=4.69; P=.033), whereas time, response, appetite, and body mass index (kg/m2) did not show any significant effect on ghrelin levels (P>.05). This is the first study showing that the course of ghrelin levels separates responders and nonresponders to lithium augmentation. Present results support the hypothesis that ghrelin serum concentrations might be involved in response to pharmacological treatment of depression. © The Author 2017. Published by Oxford University Press on behalf of CINP.

  10. Movement augmentation to evaluate human control of locomotor stability.

    Science.gov (United States)

    Brown, Geoffrey; Wu, Mengnan Mary; Huang, Felix C; Gordon, Keith E

    2017-07-01

    Controlling center of mass (COM) position and velocity within a dynamic base of support is essential for gait stability. This skill is often compromised following neurologic injury, creating a need to develop effective interventions to enhance gait stability. A movement augmentation paradigm applied to walking could potentially be used to improve control of COM dynamics. We have developed a cable robot system, the Agility Trainer, to apply continuous frontal-plane forces to the pelvis during treadmill walking. This cable robot system uses a set of series elastic actuators powered by linear motors to create bilateral forces. Here we use the Agility Trainer to create a negative viscosity force field proportional to the subject's lateral velocity. Two healthy young subjects performed two 10-minute walking trials, Baseline and Negative Viscosity. During the first minute of walking in the Negative Viscosity field, participants' lateral COM motion became less controlled when compared to the rhythmic sinusoidal motion observed during Baseline walking. By the 10th minute of walking in the Negative Viscosity field the participants had adapted their gait patterns, decreasing their variation in peak lateral COM speed each stride. These results demonstrate that it is feasible to use the Agility Trainer to apply a movement augmentation paradigm to human walking.

  11. Packing of Fruit Fly Parasitoids for Augmentative Releases

    Directory of Open Access Journals (Sweden)

    Pablo Montoya

    2012-09-01

    Full Text Available The successful application of Augmentative Biological Control (ABC to control pest fruit flies (Diptera: Tephritidae confronts two fundamental requirements: (1 the establishment of efficient mass rearing procedures for the species to be released, and (2 the development of methodologies for the packing and release of parasitoids that permit a uniform distribution and their optimal field performance under an area-wide approach. Parasitoid distributions have been performed by ground and by air with moderate results; both options face challenges that remain to be addressed. Different devices and strategies have been used for these purposes, including paper bags and the chilled adult technique, both of which are commonly used when releasing sterile flies. However, insect parasitoids have morphological and behavioral characteristics that render the application of such methodologies suboptimal. In this paper, we discuss an alternate strategy for the augmentative release of parasitoids and describe packing conditions that favor the rearing and emergence of adult parasitoids for increased field performance. We conclude that the use of ABC, including the packaging of parasitoids, requires ongoing development to ensure that this technology remains a viable and effective control technique for pest fruit flies.

  12. Critical Care

    Science.gov (United States)

    Critical care helps people with life-threatening injuries and illnesses. It might treat problems such as complications from surgery, ... attention by a team of specially-trained health care providers. Critical care usually takes place in an ...

  13. Temporal Coherence Strategies for Augmented Reality Labeling

    DEFF Research Database (Denmark)

    Madsen, Jacob Boesen; Tatzgern, Markus; Madsen, Claus B.

    2016-01-01

    Temporal coherence of annotations is an important factor in augmented reality user interfaces and for information visualization. In this paper, we empirically evaluate four different techniques for annotation. Based on these findings, we follow up with subjective evaluations in a second experiment...

  14. Design Principles for Augmented Reality Learning

    Science.gov (United States)

    Dunleavy, Matt

    2014-01-01

    Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

  15. The Educational Possibilities of Augmented Reality

    Science.gov (United States)

    Cabero, Julio; Barroso, Julio

    2016-01-01

    A large number of emergent technologies have been acquiring a strong impulse in recent years. One of these emergent technologies is Augmented Reality (RA), which will surely have a high level of penetration into all our educational centers, including universities, in the next 3 to 5 years, as a number of different reports have already highlighted.…

  16. Personalized augmented reality for anatomy education.

    Science.gov (United States)

    Ma, Meng; Fallavollita, Pascal; Seelbach, Ina; Von Der Heide, Anna Maria; Euler, Ekkehard; Waschke, Jens; Navab, Nassir

    2016-05-01

    Anatomy education is a challenging but vital element in forming future medical professionals. In this work, a personalized and interactive augmented reality system is developed to facilitate education. This system behaves as a "magic mirror" which allows personalized in-situ visualization of anatomy on the user's body. Real-time volume visualization of a CT dataset creates the illusion that the user can look inside their body. The system comprises a RGB-D sensor as a real-time tracking device to detect the user moving in front of a display. In addition, the magic mirror system shows text information, medical images, and 3D models of organs that the user can interact with. Through the participation of 7 clinicians and 72 students, two user studies were designed to respectively assess the precision and acceptability of the magic mirror system for education. The results of the first study demonstrated that the average precision of the augmented reality overlay on the user body was 0.96 cm, while the results of the second study indicate 86.1% approval for the educational value of the magic mirror, and 91.7% approval for the augmented reality capability of displaying organs in three dimensions. The usefulness of this unique type of personalized augmented reality technology has been demonstrated in this paper. © 2015 Wiley Periodicals, Inc.

  17. Determination of Student Opinions in Augmented Reality

    Science.gov (United States)

    Bicen, Huseyin; Bal, Erkan

    2016-01-01

    The rapid development of the new technology has changed classroom teaching methods and tools in a positive way. This study investigated the classroom learning with augmented reality and the impact of student opinions. 97 volunteer undergraduate students took part in this study. Results included data in the form of frequencies, percentages and…

  18. Intelligent Augmented Reality Training for Motherboard Assembly

    Science.gov (United States)

    Westerfield, Giles; Mitrovic, Antonija; Billinghurst, Mark

    2015-01-01

    We investigate the combination of Augmented Reality (AR) with Intelligent Tutoring Systems (ITS) to assist with training for manual assembly tasks. Our approach combines AR graphics with adaptive guidance from the ITS to provide a more effective learning experience. We have developed a modular software framework for intelligent AR training…

  19. Augmentation of board games using smartphones

    DEFF Research Database (Denmark)

    Kulsinskas, Arturas; Balan, Catalin; Egede Bukdahl, Nicholas

    2015-01-01

    This paper contains details about research into the effect of digital augmentation on social presence in board games. A case study of the board game Tobago was performed during the project and a prototype application for smartphones was developed in order to compare the players’ social presence...

  20. Augmented reality for Android application development

    CERN Document Server

    Grubert, Jens

    2013-01-01

    A step-by-step tutorial-based guide aimed at giving you hands-on practical experience to develop AR applications for Android.Augmented Reality for Android Application Development is for Android mobile application developers who are familiar with Android Development Tools and deployment, JMonkeyEngine, and the Vuforia SDK.

  1. CARE: Creating Augmented Reality in Education

    Science.gov (United States)

    Latif, Farzana

    2012-01-01

    This paper explores how Augmented Reality using mobile phones can enhance teaching and learning in education. It specifically examines its application in two cases, where it is identified that the agility of mobile devices and the ability to overlay context specific resources offers opportunities to enhance learning that would not otherwise exist.…

  2. Aloqa and layar augmented reality feeds

    NARCIS (Netherlands)

    Ternier, Stefaan

    2010-01-01

    Aloqa is a service that proactively notifies the user of Point Of Interests (POIs). It runs on iPhone, blackberry and android. With this tool you can easily get directions to events, places, buildings or other places of interests. Layar builds on the same principle, but has a browser that augments

  3. Facial skeletal augmentation using hydroxyapatite cement.

    Science.gov (United States)

    Shindo, M L; Costantino, P D; Friedman, C D; Chow, L C

    1993-02-01

    This study investigates the use of a new calcium phosphate cement, which sets to solid, microporous hydroxyapatite, for facial bone augmentation. In six dogs, the supraorbital ridges were augmented bilaterally with this hydroxyapatite cement. On one side, the hydroxyapatite cement was placed directly onto the bone within a subperiosteal pocket. On the opposite side, the cement was contained within a collagen membrane tubule and then inserted into a subperiosteal pocket. The use of collagen tubules facilitated easy, precise placement of the cement. All implants maintained their original augmented height throughout the duration of the study. They were well tolerated without extrusion or migration, and there was no significant sustained inflammatory response. Histologic studies, performed at 3, 6, and 9 months revealed that when the cement was placed directly onto bone, progressive replacement of the implant by bone (osseointegration of the hydroxyapatite with the underlying bone) without a loss of volume was observed. In contrast, when the cement-collagen tubule combination was inserted, primarily a fibrous union was noted. Despite such fibrous union, the hydroxyapatite-collagen implant solidly bonded to the underlying bone, and no implant resorption was observed. Hydroxyapatite cement can be used successfully for the experimental augmentation of the craniofacial skeleton and may be applicable for such uses in humans.

  4. (Re-)Examination of Multimodal Augmented Reality

    NARCIS (Netherlands)

    Rosa, N.E.; Werkhoven, P.J.; Hürst, W.O.

    2016-01-01

    The majority of augmented reality (AR) research has been concerned with visual perception, however the move towards multimodality is imminent. At the same time, there is no clear vision of what multimodal AR is. The purpose of this position paper is to consider possible ways of examining AR other

  5. Accurate overlaying for mobile augmented reality

    NARCIS (Netherlands)

    Pasman, W; van der Schaaf, A; Lagendijk, RL; Jansen, F.W.

    1999-01-01

    Mobile augmented reality requires accurate alignment of virtual information with objects visible in the real world. We describe a system for mobile communications to be developed to meet these strict alignment criteria using a combination of computer vision. inertial tracking and low-latency

  6. Alveolar ridge augmentation by osteoinduction in rats

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1990-01-01

    The purpose of this study was to evaluate bone substitutes for alveolar ridge augmentation by osteoinduction. Allogenic, demineralized, and lyophilized dentin and bone was tested for osteoinductive properties in order to establish an experimental model for further studies. Implantations were perf...

  7. Augmentative Communication Services in the Schools.

    Science.gov (United States)

    Blackstone, Sarah W.

    1989-01-01

    The article considers current issues concerning service delivery systems and practices concerning augmentative and alternative communication (AAC) services in U.S. schools. Concerns in AAC program development are noted and service delivery models (center-based, community-based, or collaborative) are compared. (DB)

  8. Augmented Reality in Sports: Today and Tomorrow

    Directory of Open Access Journals (Sweden)

    Zafer BOZYER

    2015-08-01

    Full Text Available The rapid change experienced in the field of Information Technologies makes the informati cs more tangible in daily life. Today, it became possible to encounter with the informatics applications almost all the disciplines. As a matter of course, many informatics applications are put into the practice regarding the sports discipline. Because of the condition that the power of information processing has increased and the studies on wearable technol ogies in addition to the expert system design, augmented reality (AR has become a topic which gains imp ortance in the field of sports. There are many studies that are conducted with the aim of increasing the efficiency of physical activities done in many sports branches, ensuring a more fair management of competitions and providing the opportunity for spectators to watch the competitions in a more comfortable and efficient way. In this study; the information about the current augmented reality practices th at are used in various sports branches has been given and the mobile and interactive augmented reality practices which are possible to be seen in future have been mentioned. In addition, there is an augmented reality practice which is designed with the aim of ensuring that the shoots of sports people who are interested in archery, are more stable and of ensuring that the trainings and exercises are more efficient by stating to the sports people whether he or she is in the right position for shoot which is c alled as T shape seen at the time of releasing the arrow.

  9. Location-Based Learning through Augmented Reality

    Science.gov (United States)

    Chou, Te-Lien; Chanlin, Lih-Juan

    2014-01-01

    A context-aware and mixed-reality exploring tool cannot only effectively provide an information-rich environment to users, but also allows them to quickly utilize useful resources and enhance environment awareness. This study integrates Augmented Reality (AR) technology into smartphones to create a stimulating learning experience at a university…

  10. Volumetric, dashboard-mounted augmented display

    Science.gov (United States)

    Kessler, David; Grabowski, Christopher

    2017-11-01

    The optical design of a compact volumetric display for drivers is presented. The system displays a true volume image with realistic physical depth cues, such as focal accommodation, parallax and convergence. A large eyebox is achieved with a pupil expander. The windshield is used as the augmented reality combiner. A freeform windshield corrector is placed at the dashboard.

  11. Get Real: Augmented Reality for the Classroom

    Science.gov (United States)

    Mitchell, Rebecca; DeBay, Dennis

    2012-01-01

    Kids love augmented reality (AR) simulations because they are like real-life video games. AR simulations allow students to learn content while collaborating face to face and interacting with a multimedia-enhanced version of the world around them. Although the technology may seem advanced, AR software makes it easy to develop content-based…

  12. Understanding the Conics through Augmented Reality

    Science.gov (United States)

    Salinas, Patricia; Pulido, Ricardo

    2017-01-01

    This paper discusses the production of a digital environment to foster the learning of conics through augmented reality. The name conic refers to curves obtained by the intersection of a plane with a right circular conical surface. The environment gives students the opportunity to interact with the cone and the plane as virtual objects in real…

  13. Estimating energy-augmenting technological change in developing country industries

    International Nuclear Information System (INIS)

    Sanstad, Alan H.; Roy, Joyashree; Sathaye, Jayant A.

    2006-01-01

    Assumptions regarding the magnitude and direction of energy-related technological change have long been recognized as critical determinants of the outputs and policy conclusions derived from integrated assessment models. Particularly in the case of developing countries, however, empirical analysis of technological change has lagged behind simulation modeling. This paper presents estimates of sectoral productivity trends and energy-augmenting technological change for several energy-intensive industries in India and South Korea, and, for comparison, the United States. The key findings are substantial heterogeneity among both industries and countries, and a number of cases of declining energy efficiency. The results are subject to certain technical qualifications both in regards to the methodology and to the direct comparison to integrated assessment parameterizations. Nevertheless, they highlight the importance of closer attention to the empirical basis for common modeling assumptions

  14. Augmented wave ab initio EFG calculations: some methodological warnings

    International Nuclear Information System (INIS)

    Errico, Leonardo A.; Renteria, Mario; Petrilli, Helena M.

    2007-01-01

    We discuss some accuracy aspects inherent to ab initio electronic structure calculations in the understanding of nuclear quadrupole interactions. We use the projector augmented wave method to study the electric-field gradient (EFG) at both Sn and O sites in the prototype cases SnO and SnO 2 . The term ab initio is used in the standard context of the also called first principles methods in the framework of the Density Functional Theory. As the main contributions of EFG calculations to problems in condensed matter physics are related to structural characterizations on the atomic scale, we discuss the 'state of the art' on theoretical EFG calculations and make a brief critical review on the subject, calling attention to some fundamental theoretical aspects

  15. Augmented wave ab initio EFG calculations: some methodological warnings

    Energy Technology Data Exchange (ETDEWEB)

    Errico, Leonardo A. [Departamento de Fisica-IFLP (CONICET), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, CC67 (1900) La Plata (Argentina); Renteria, Mario [Departamento de Fisica-IFLP (CONICET), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, CC67 (1900) La Plata (Argentina); Petrilli, Helena M. [Instituto de Fisica-DFMT, Universidade de Sao Paulo, C.P. 66318, 05315-970 Sao Paulo, SP (Brazil)]. E-mail: hmpetril@macbeth.if.usp.br

    2007-02-01

    We discuss some accuracy aspects inherent to ab initio electronic structure calculations in the understanding of nuclear quadrupole interactions. We use the projector augmented wave method to study the electric-field gradient (EFG) at both Sn and O sites in the prototype cases SnO and SnO{sub 2}. The term ab initio is used in the standard context of the also called first principles methods in the framework of the Density Functional Theory. As the main contributions of EFG calculations to problems in condensed matter physics are related to structural characterizations on the atomic scale, we discuss the 'state of the art' on theoretical EFG calculations and make a brief critical review on the subject, calling attention to some fundamental theoretical aspects.

  16. Gravbox - The First Augmented Reality Sandbox for Gravitational Dynamics

    Science.gov (United States)

    Isbell, Jacob; Deam, Sophie; Reed, Mason; Bettis, Wyatt; Lu, Jianbo; Luppen, Zachary; Maier, Erin; McCurdy, Ross; Moore, Sadie; Fu, Hai

    2018-01-01

    Gravitational effects are an overarching theme in astronomy education, yet existing classroom demonstrations are insufficient in elucidating complex gravitational interactions. Inspired by the augmented reality (AR) sandbox developed by geologists, we have developed Gravbox, the first AR sandbox to demonstrate gravitational dynamics. The arbitrary topography of the sand surface represents the mass distribution of a two-dimensional universe. The computer reads the topography with a Kinect camera, calculates the orbit of a test particle with user-defined position and velocity, and projects the topography contour map and orbit animation with an overhead projector, all within a duty cycle of one second. This creates an interactive and intuitive tool to help students at all levels understand gravitational effects. In this contribution, we will describe the development of the Gravbox prototype and show its current capabilities. The Gravbox software will be publicly available along with a building tutorial.

  17. Development of CFD model for augmented core tripropellant rocket engine

    Science.gov (United States)

    Jones, Kenneth M.

    1994-10-01

    The Space Shuttle era has made major advances in technology and vehicle design to the point that the concept of a single-stage-to-orbit (SSTO) vehicle appears more feasible. NASA presently is conducting studies into the feasibility of certain advanced concept rocket engines that could be utilized in a SSTO vehicle. One such concept is a tripropellant system which burns kerosene and hydrogen initially and at altitude switches to hydrogen. This system will attain a larger mass fraction because LOX-kerosene engines have a greater average propellant density and greater thrust-to-weight ratio. This report describes the investigation to model the tripropellant augmented core engine. The physical aspects of the engine, the CFD code employed, and results of the numerical model for a single modular thruster are discussed.

  18. The role of imaging in pediatric bladder augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Breen, Micheal; Chow, Jeanne S. [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States); Phelps, Andrew [UCSF Benioff Children' s Hospital San Francisco, Department of Radiology and Biomedical Imaging, San Francisco, CA (United States); Estrada, Carlos [Boston Children' s Hospital, Department of Urology, Boston, MA (United States)

    2015-09-15

    Bladder augmentation (also called augmentation cystoplasty) refers to a number of surgical methods that increase the capacity and compliance of the urinary bladder. Imaging has an important role in the postoperative evaluation of bladder augmentation. The most common augmentation procedures utilize enteric segments to augment the bladder. The various types of bladder augmentation have characteristic appearances on different imaging modalities. Spontaneous bladder perforation is a complication that is seen in both early and late post-operative periods and it is one of the most important complications for radiologists to be aware of as it is life-threatening. We review the indications for bladder augmentation in children, the surgical techniques employed, the normal postoperative appearances on imaging studies and the role of imaging complications of bladder augmentation including delayed spontaneous bladder rupture, which is life-threatening. (orig.)

  19. How Critical Is Critical Thinking?

    Science.gov (United States)

    Shaw, Ryan D.

    2014-01-01

    Recent educational discourse is full of references to the value of critical thinking as a 21st-century skill. In music education, critical thinking has been discussed in relation to problem solving and music listening, and some researchers suggest that training in critical thinking can improve students' responses to music. But what exactly is…

  20. The synergy of creativity and critical thinking in engineering design

    DEFF Research Database (Denmark)

    Spuzic, Sead; Narayanan, Ramadas; Adriansen, Hanne Kirstine

    2016-01-01

    framework. It has been widely recognised that engineering design encompasses two ways of thinkingdcreative and critical. A central argument that the synergy of creativity and criticality is significantly enhanced by connecting true interdisciplinary augmentation with the fine arts is discussed along...

  1. Alternative realities : from augmented reality to mobile mixed reality

    OpenAIRE

    Claydon, Mark

    2015-01-01

    This thesis provides an overview of (mobile) augmented and mixed reality by clarifying the different concepts of reality, briefly covering the technology behind mobile augmented and mixed reality systems, conducting a concise survey of existing and emerging mobile augmented and mixed reality applications and devices. Based on the previous analysis and the survey, this work will next attempt to assess what mobile augmented and mixed reality could make possible, and what related applications an...

  2. Critical Mass: Education and the Economy.

    Science.gov (United States)

    Groff, Warren H.

    1984-01-01

    Underscores the importance of strategic planning and management in higher education in the future, emphasizing the need to develop the intellectual capital necessary to implement planning and management systems to tighten the relationship between education and the economy. Discusses selected facts about the economy and the challenges facing…

  3. Initial Model of Social Acceptability for Human Augmentation Technologies

    NARCIS (Netherlands)

    Eghtebas, Chloe; Pay, Yun Suen; Väänänen, Kaisa; Pfeiffer, Ties; Meyer, Joachim; Lukosch, S.G.

    2017-01-01

    Academia and industry engage in major efforts to develop technologies for augmenting human senses and activities. Many of these technologies, such as augmented reality (AR) and virtual reality (VR) head mounted displays (HMD), haptic augmentation systems, and exoskeletons can be applied in numerous

  4. Augmented reality: dé nieuwe dimensie in de sport?

    NARCIS (Netherlands)

    Slender, Hans

    2010-01-01

    Volgens trendwatcher Justien Marseille de trend van 2010: augmented reality. Augmented reality is een techniek om met de computer gemaakte beelden toe te voegen aan de realiteit. Het Nederlandse Layar (layar.com) presenteerde zich vorig jaar vol trots als een unieke augmented reality browser, met

  5. Critical Jostling

    Directory of Open Access Journals (Sweden)

    Pippin Barr

    2016-11-01

    Full Text Available Games can serve a critical function in many different ways, from serious games about real world subjects to self-reflexive commentaries on the nature of games themselves. In this essay we discuss critical possibilities stemming from the area of critical design, and more specifically Carl DiSalvo’s adversarial design and its concept of reconfiguring the remainder. To illustrate such an approach, we present the design and outcomes of two games, Jostle Bastard and Jostle Parent. We show how the games specifically engage with two previous games, Hotline Miami and Octodad: Dadliest Catch, reconfiguring elements of those games to create interactive critical experiences and extensions of the source material. Through the presentation of specific design concerns and decisions, we provide a grounded illustration of a particular critical function of videogames and hope to highlight this form as another valuable approach in the larger area of videogame criticism.

  6. Global navigation satellite systems performance analysis and augmentation strategies in aviation

    Science.gov (United States)

    Sabatini, Roberto; Moore, Terry; Ramasamy, Subramanian

    2017-11-01

    In an era of significant air traffic expansion characterized by a rising congestion of the radiofrequency spectrum and a widespread introduction of Unmanned Aircraft Systems (UAS), Global Navigation Satellite Systems (GNSS) are being exposed to a variety of threats including signal interferences, adverse propagation effects and challenging platform-satellite relative dynamics. Thus, there is a need to characterize GNSS signal degradations and assess the effects of interfering sources on the performance of avionics GNSS receivers and augmentation systems used for an increasing number of mission-essential and safety-critical aviation tasks (e.g., experimental flight testing, flight inspection/certification of ground-based radio navigation aids, wide area navigation and precision approach). GNSS signal deteriorations typically occur due to antenna obscuration caused by natural and man-made obstructions present in the environment (e.g., elevated terrain and tall buildings when flying at low altitude) or by the aircraft itself during manoeuvring (e.g., aircraft wings and empennage masking the on-board GNSS antenna), ionospheric scintillation, Doppler shift, multipath, jamming and spurious satellite transmissions. Anyone of these phenomena can result in partial to total loss of tracking and possible tracking errors, depending on the severity of the effect and the receiver characteristics. After designing GNSS performance threats, the various augmentation strategies adopted in the Communication, Navigation, Surveillance/Air Traffic Management and Avionics (CNS + A) context are addressed in detail. GNSS augmentation can take many forms but all strategies share the same fundamental principle of providing supplementary information whose objective is improving the performance and/or trustworthiness of the system. Hence it is of paramount importance to consider the synergies offered by different augmentation strategies including Space Based Augmentation System (SBAS), Ground

  7. Critical Proximity

    OpenAIRE

    Simon, Jane

    2010-01-01

    This essay considers how written language frames visual objects. Drawing on Michel Foucault’s response to Raymond Roussel’s obsessive description, the essay proposes a model of criticism where description might press up against its objects. This critical closeness is then mapped across the conceptual art practice and art criticism of Ian Burn. Burn attends to the differences between seeing and reading, and considers the conditions which frame how we look at images, including how w...

  8. Criticality Model

    International Nuclear Information System (INIS)

    Alsaed, A.

    2004-01-01

    The ''Disposal Criticality Analysis Methodology Topical Report'' (YMP 2003) presents the methodology for evaluating potential criticality situations in the monitored geologic repository. As stated in the referenced Topical Report, the detailed methodology for performing the disposal criticality analyses will be documented in model reports. Many of the models developed in support of the Topical Report differ from the definition of models as given in the Office of Civilian Radioactive Waste Management procedure AP-SIII.10Q, ''Models'', in that they are procedural, rather than mathematical. These model reports document the detailed methodology necessary to implement the approach presented in the Disposal Criticality Analysis Methodology Topical Report and provide calculations utilizing the methodology. Thus, the governing procedure for this type of report is AP-3.12Q, ''Design Calculations and Analyses''. The ''Criticality Model'' is of this latter type, providing a process evaluating the criticality potential of in-package and external configurations. The purpose of this analysis is to layout the process for calculating the criticality potential for various in-package and external configurations and to calculate lower-bound tolerance limit (LBTL) values and determine range of applicability (ROA) parameters. The LBTL calculations and the ROA determinations are performed using selected benchmark experiments that are applicable to various waste forms and various in-package and external configurations. The waste forms considered in this calculation are pressurized water reactor (PWR), boiling water reactor (BWR), Fast Flux Test Facility (FFTF), Training Research Isotope General Atomic (TRIGA), Enrico Fermi, Shippingport pressurized water reactor, Shippingport light water breeder reactor (LWBR), N-Reactor, Melt and Dilute, and Fort Saint Vrain Reactor spent nuclear fuel (SNF). The scope of this analysis is to document the criticality computational method. The criticality

  9. Augmenting WFIRST Microlensing with a Ground-Based Telescope Network

    Science.gov (United States)

    Zhu, Wei; Gould, Andrew

    2016-06-01

    Augmenting the Wide Field Infrared Survey Telescope (WFIRST) microlensing campaigns with intensive observations from a ground-based network of wide-field survey telescopes would have several major advantages. First, it would enable full two-dimensional (2-D) vector microlens parallax measurements for a substantial fraction of low-mass lenses as well as planetary and binary events that show caustic crossing features. For a significant fraction of the free-floating planet (FFP) events and all caustic-crossing planetary/binary events, these 2-D parallax measurements directly lead to complete solutions (mass, distance, transverse velocity) of the lens object (or lens system). For even more events, the complementary ground-based observations will yield 1-D parallax measurements. Together with the 1-D parallaxes from WFIRST alone, they can probe the entire mass range M > M_Earth. For luminous lenses, such 1-D parallax measurements can be promoted to complete solutions (mass, distance, transverse velocity) by high-resolution imaging. This would provide crucial information not only about the hosts of planets and other lenses, but also enable a much more precise Galactic model. Other benefits of such a survey include improved understanding of binaries (particularly with low mass primaries), and sensitivity to distant ice-giant and gas-giant companions of WFIRST lenses that cannot be detected by WFIRST itself due to its restricted observing windows. Existing ground-based microlensing surveys can be employed if WFIRST is pointed at lower-extinction fields than is currently envisaged. This would come at some cost to the event rate. Therefore the benefits of improved characterization of lenses must be weighed against these costs.

  10. Dynamic augmentation restores anterior tibial translation in ACL suture repair: a biomechanical comparison of non-, static and dynamic augmentation techniques.

    Science.gov (United States)

    Hoogeslag, Roy A G; Brouwer, Reinoud W; Huis In 't Veld, Rianne; Stephen, Joanna M; Amis, Andrew A

    2018-02-03

    There is a lack of objective evidence investigating how previous non-augmented ACL suture repair techniques and contemporary augmentation techniques in ACL suture repair restrain anterior tibial translation (ATT) across the arc of flexion, and after cyclic loading of the knee. The purpose of this work was to test the null hypotheses that there would be no statistically significant difference in ATT after non-, static- and dynamic-augmented ACL suture repair, and they will not restore ATT to normal values across the arc of flexion of the knee after cyclic loading. Eleven human cadaveric knees were mounted in a test rig, and knee kinematics from 0° to 90° of flexion were recorded by use of an optical tracking system. Measurements were recorded without load and with 89-N tibial anterior force. The knees were tested in the following states: ACL-intact, ACL-deficient, non-augmented suture repair, static tape augmentation and dynamic augmentation after 10 and 300 loading cycles. Only static tape augmentation and dynamic augmentation restored ATT to values similar to the ACL-intact state directly postoperation, and maintained this after cyclic loading. However, contrary to dynamic augmentation, the ATT after static tape augmentation failed to remain statistically less than for the ACL-deficient state after cyclic loading. Moreover, after cyclic loading, ATT was significantly less with dynamic augmentation when compared to static tape augmentation. In contrast to non-augmented ACL suture repair and static tape augmentation, only dynamic augmentation resulted in restoration of ATT values similar to the ACL-intact knee and decreased ATT values when compared to the ACL-deficient knee immediately post-operation and also after cyclic loading, across the arc of flexion, thus allowing the null hypotheses to be rejected. This may assist healing of the ruptured ACL. Therefore, this study would support further clinical evaluation of dynamic augmentation of ACL repair.

  11. Geochemical constraints on accumulation of actinide critical masses from stored nuclear waste in natural rock repositories. Technical report, April 1, 1978--August 31, 1978 (plus supplemental time to December 31, 1978)

    International Nuclear Information System (INIS)

    Brookins, D.G.

    1978-01-01

    Results of a literature search of abundant data on lanthanide and actinide individual and joint systematics are presented. Covered were several papers/reports about uranium solution chemistry, uranium deposits, a natural fission reactor, rare-earch deposits, manganese nodules, bedded and dome salt deposits, and miscellaneous items. This literature search is not complete but represents efforts of seven individuals attempting to gather data relevant to the objectives defined in this report. Many foreign articles, as well as many English language articles are absent. Approximately 800 articles were inspected; 69 are included in the References cited. The data search for actinides and lanthanides in natural rocks indicated that only limited segregation of the actinides U, Np, Pu, Am, and Cm from the lanthanides is possible should high-level waste be released from canisters stored in various geomedia. Supporting this were studies of Oklo and other uranium deposits, manganese nodules, monomineralic and concretion formation rates, and actinide and lathanide transport in brines. The fact that some waste canisters may, under certain conditions, contain several critical masses of one or more actinides is countered by the facts that (a) most actinides have very short half-lives and would decay before release from canisters, (b) released actinides and lanthanides, although dispersed, would be transported and deposited as a group, thus preventing point concentration of any actinides, and (c) 235 U has a much longer half-life than the other actinides, thus allowing greater time for possible reaccumulation and criticality; such a scenario would demand that 235 U be segregated effectively from other elements in the lanthanide-actinide groups.No mechanism to do this is consistent with the natural occurrences studied or the theoretical Eh-pH diagrams considered

  12. Augmenting Probabilistic Risk Assesment with Malevolent Initiators

    International Nuclear Information System (INIS)

    Smith, Curtis; Schwieder, David

    2011-01-01

    As commonly practiced, the use of probabilistic risk assessment (PRA) in nuclear power plants only considers accident initiators such as natural hazards, equipment failures, and human error. Malevolent initiators are ignored in PRA, but are considered the domain of physical security, which uses vulnerability assessment based on an officially specified threat (design basis threat). This paper explores the implications of augmenting and extending existing PRA models by considering new and modified scenarios resulting from malevolent initiators. Teaming the augmented PRA models with conventional vulnerability assessments can cost-effectively enhance security of a nuclear power plant. This methodology is useful for operating plants, as well as in the design of new plants. For the methodology, we have proposed an approach that builds on and extends the practice of PRA for nuclear power plants for security-related issues. Rather than only considering 'random' failures, we demonstrated a framework that is able to represent and model malevolent initiating events and associated plant impacts.

  13. Interactive learning environments in augmented reality technology

    Directory of Open Access Journals (Sweden)

    Rafał Wojciechowski

    2010-01-01

    Full Text Available In this paper, the problem of creation of learning environments based on augmented reality (AR is considered. The concept of AR is presented as a tool for safe and cheap experimental learning. In AR learning environments students may acquire knowledge by personally carrying out experiments on virtual objects by manipulating real objects located in real environments. In the paper, a new approach to creation of interactive educational scenarios, called Augmented Reality Interactive Scenario Modeling (ARISM, is mentioned. In this approach, the process of building learning environments is divided into three stages, each of them performed by users with different technical and domain knowledge. The ARISM approach enables teachers who are not computer science experts to create AR learning environments adapted to the needs of their students.

  14. Camera Based Navigation System with Augmented Reality

    Directory of Open Access Journals (Sweden)

    M. Marcu

    2012-06-01

    Full Text Available Nowadays smart mobile devices have enough processing power, memory, storage and always connected wireless communication bandwidth that makes them available for any type of application. Augmented reality (AR proposes a new type of applications that tries to enhance the real world by superimposing or combining virtual objects or computer generated information with it. In this paper we present a camera based navigation system with augmented reality integration. The proposed system aims to the following: the user points the camera of the smartphone towards a point of interest, like a building or any other place, and the application searches for relevant information about that specific place and superimposes the data over the video feed on the display. When the user moves the camera away, changing its orientation, the data changes as well, in real-time, with the proper information about the place that is now in the camera view.

  15. Survey on Urban Warfare Augmented Reality

    Directory of Open Access Journals (Sweden)

    Xiong You

    2018-01-01

    Full Text Available Urban warfare has become one of the main forms of modern combat in the twenty-first century. The main reason why urban warfare results in hundreds of casualties is that the situational information of the combatant is insufficient. Accessing information via an Augmented Reality system can elevate combatants’ situational awareness to effectively improve the efficiency of decision-making and reduce the injuries. This paper begins with the concept of Urban Warfare Augmented Reality (UWAR and illuminates the objectives of developing UWAR, i.e., transparent battlefield, intuitional perception and natural interaction. Real-time outdoor registration, information presentation and natural interaction are presented as key technologies of a practical UWAR system. Then, the history and current research state of these technologies are summarized and their future developments are highlighted from three perspectives, i.e., (1 Better integration with Geographic Information System and Virtual Geographic Environment; (2 More intelligent software; (3 More powerful hardware.

  16. MARCS: Mobile Augmented Reality for Cybersecurity

    OpenAIRE

    Mattina, Brendan Casey

    2017-01-01

    Network analysts have long used two-dimensional security visualizations to make sense of network data. As networks grow larger and more complex, two-dimensional visualizations become more convoluted, potentially compromising user situational awareness of cyber threats. To combat this problem, augmented reality (AR) can be employed to visualize data within a cyber-physical context to restore user perception and improve comprehension; thereby, enhancing cyber situational awareness. Multiple gen...

  17. Facade Proposals for Urban Augmented Reality

    OpenAIRE

    Fond , Antoine; Berger , Marie-Odile; Simon , Gilles

    2017-01-01

    International audience; We introduce a novel object proposals method specific to building facades. We define new image cues that measure typical facadecharacteristics such as semantic, symmetry and repetitions. They are combined to generate a few facade candidates in urban environments fast. We show that our method outperforms state-of-the-art object proposals techniques for this task on the 1000 images of the Zurich Building Database. We demonstrate the interest of this procedure for augment...

  18. Lifelong Augmentation of Multimodal Streaming Autobiographical Memories

    OpenAIRE

    Petit, Maxime; Fischer, Tobias; Demiris, Yiannis

    2016-01-01

    Robot systems that interact with humans over extended periods of time will benefit from storing and recalling large amounts of accumulated sensorimotor and interaction data. We provide a principled framework for the cumulative organisation of streaming autobiographical data so that data can be continuously processed and augmented as the processing and reasoning abilities of the agent develop and further interactions with humans take place. As an example, we show how a kinematic structure lear...

  19. Augmented reality to training spatial skills

    OpenAIRE

    Martin-Gutierrez, Jorge; Contero, Manuel; Alcañiz Raya, Mariano Luis

    2015-01-01

    La Laguna University has been offering courses for the development of spatial skills since 2004. Each year since that time spatial ability of engineering students has been measured before and after the courses to check progress after each training session. We have developed a spatial skills training course based on augmented reality and graphic engineering contents, and designed the AR_Dehaes tool, which is based on its own library the uses computer vision techniques for incorporating vis...

  20. Augmentation Mammaplasty Using Implants: A Review

    Directory of Open Access Journals (Sweden)

    Susumu Takayanagi

    2012-09-01

    Full Text Available One of the techniques for augmentation mammaplasty is the procedure using implants. Even though this technique has been used for many years, there are still several controversial issues to be discussed and overcome for patient safety. In this review article, capsular contracture, leak or rupture of the implants, possible systemic disease, relation with breast cancer, and recent problems with Poly Implant Prothese implants are described and discussed.

  1. Augmentation Mammaplasty Using Implants: A Review

    Directory of Open Access Journals (Sweden)

    Susumu Takayanagi

    2012-09-01

    Full Text Available One of the techniques for augmentation mammaplasty is the procedure using implants. Eventhough this technique has been used for many years, there are still several controversial issuesto be discussed and overcome for patient safety. In this review article, capsular contracture,leak or rupture of the implants, possible systemic disease, relation with breast cancer, andrecent problems with Poly Implant Prothese implants are described and discussed.

  2. CIRSE Guidelines on Percutaneous Vertebral Augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Tsoumakidou, Georgia, E-mail: gtsoumakidou@yahoo.com; Too, Chow Wei, E-mail: spyder55@gmail.com; Koch, Guillaume, E-mail: guillaume.koch@gmail.com; Caudrelier, Jean, E-mail: jean.caudrelier@chru-strasbourg.fr; Cazzato, Roberto Luigi, E-mail: gigicazzato@hotmail.it; Garnon, Julien, E-mail: juliengarnon@gmail.com; Gangi, Afshin, E-mail: gangi@unistra.fr [Strasbourg University Hospital, Interventional Radiology Department (France)

    2017-03-15

    Vertebral compression fracture (VCF) is an important cause of severe debilitating back pain, adversely affecting quality of life, physical function, psychosocial performance, mental health and survival. Different vertebral augmentation procedures (VAPs) are used in order to consolidate the VCFs, relief pain,and whenever posible achieve vertebral body height restoration. In the present review we give the indications, contraindications, safety profile and outcomes of the existing percutaneous VAPs.

  3. Medical imaging and augmented reality. Proceedings

    International Nuclear Information System (INIS)

    Yang Guang-Zhong; Jiang Tianzi; Shen Dinggang; Gu Lixu; Yang Jie

    2006-01-01

    This book constitutes the refereed proceedings of the Third International Workshop on Medical Imaging and Augmented Reality, MIAR 2006, held in Shanghai, China, in August 2006. The 45 revised full papers presented together with 4 invited papers were carefully reviewed and selected from 87 submissions. The papers are organized in topical sections on shape modeling and morphometry, patient specific modeling and quantification, surgical simulation and skills assessment, surgical guidance and navigation, image registration, PET image reconstruction, and image segmentation. (orig.)

  4. Multiple Kernel Learning with Data Augmentation

    Science.gov (United States)

    2016-11-22

    JMLR: Workshop and Conference Proceedings 63:49–64, 2016 ACML 2016 Multiple Kernel Learning with Data Augmentation Khanh Nguyen nkhanh@deakin.edu.au...University, Australia Editors: Robert J. Durrant and Kee-Eung Kim Abstract The motivations of multiple kernel learning (MKL) approach are to increase... kernel expres- siveness capacity and to avoid the expensive grid search over a wide spectrum of kernels . A large amount of work has been proposed to

  5. Developing augmented reality solutions through user involvement

    OpenAIRE

    Siltanen, Sanni

    2015-01-01

    Augmented reality (AR) technology merges digital information into the real world. It is an effective visualization method; AR enhances user's spatial perception skills and helps to understand spatial dimensions and relationships. It is beneficial for many professional application areas such as assembly, maintenance and repair. AR visualization helps to concretize building and construction projects and interior design plans – also for non-technically oriented people, who might otherwise have d...

  6. IMPLEMENTATION OF AERONAUTICAL LOCAL SATELLITE AUGMENTATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Stojce Ilcev

    2011-03-01

    Full Text Available Abstract. This paper introduces development and implementation of new Local Satellite AugmentationSystem as an integration component of the Regional Satellite Augmentation System (RSAS employingcurrent and new Satellite Communications, Navigation and Surveillance (CNS for improvement of the AirTraffic Control (ATC and Air Traffic Management (ATM and for enhancement safety systems includingtransport security and control of flights in all stages, airport approaching, landing, departures and allmovements over airport surface areas. The current first generation of the Global Navigation Satellite SystemGNSS-1 applications are represented by fundamental military solutions for Position, Velocity and Time ofthe satellite navigation and determination systems such as the US GPS and Russian GLONASS (Former-USSR requirements, respectively. The establishment of Aeronautical CNS is also discussed as a part ofGlobal Satellite Augmentation Systems of GPS and GLONASS systems integrated with existing and futureRSAS and LSAS in airports areas. Specific influence and factors related to the Comparison of the Currentand New Aeronautical CNS System including the Integration of RSAS and GNSS solutions are discussedand packet of facts is determined to maximize the new satellite Automatic Dependent Surveillance System(ADSS and Special Effects of the RSAS Networks. The possible future integration of RSAS and GNSS andthe common proposal of the satellite Surface Movement Guidance and Control are presented in thechangeless ways as of importance for future enfacements of ATC and ATM for any hypothetical airportinfrastructure.Keywords: ADSS, ATC, ATM, CNS, GSAS, LRAS, RSAS, SMGC, Special Effects of RSAS.

  7. Labor Augmentation with Oxytocin Decreases Glutathione Level

    Directory of Open Access Journals (Sweden)

    Naomi Schneid-Kofman

    2009-01-01

    Full Text Available Objective. To compare oxidative stress following spontaneous vaginal delivery with that induced by Oxytocin augmented delivery. Methods. 98 women recruited prior to labor. 57 delivered spontaneously, while 41 received Oxytocin for augmentation of labor. Complicated deliveries and high-risk pregnancies were excluded. Informed consent was documented. Arterial cord blood gases, levels of Hematocrit, Hemoglobin, and Bilirubin were studied. Glutathione (GSH concentration was measured by a spectroscopic method. Plasma and red blood cell (RBC levels of Malondialdehyde indicated lipid peroxidation. RBC uptake of phenol red denoted cell penetrability. SPSS data analysis was used. Results. Cord blood GSH was significantly lower in the Oxytocin group (2.3±0.55 mM versus 2.55±0.55 mM, =.01. No differences were found in plasma or RBC levels of MDA or in uptake of Phenol red between the groups. Conclusion. Lower GSH levels following Oxytocin augmentation indicate an oxidative stress, though selected measures of oxidative stress demonstrate no cell damage.

  8. A Mobile Augmented Reality Emulator for Android

    Directory of Open Access Journals (Sweden)

    Donald Munro

    2017-07-01

    Full Text Available Augmented Reality (AR provides a fusion of the real and virtual worlds by superimposing virtual objects on real world scenery. The implementation of AR on mobile devices is known as Mobile Augmented Reality (MAR. MAR is in its infancy and MAR development software is in the process of maturing. Dating back to the origin of Computer Science as an independent field, software development tools have been an integral part of the process of software creation. MAR, being a relatively new technology, is still lacking such related software development tools. With the rapid progression of mobile devices, the development of MAR applications fusing advanced Computer Vision techniques with mobile device sensors have become increasingly feasible. However, testing and debugging of MAR applications present a new challenge in that they require the developer be at the location that is being augmented at some point during the development process. In this research study, a MAR recorder application was developed as well as emulation class libraries for Android devices that allows the recording and off-site playback of video, location and motion sensor data. The research objective was to provide a software emulator which provides debugging, testing and prototyping capabilities for a MAR application including the ability to emulate the combination of computer vision with locational and motion sensors using previously recorded data. The emulator was evaluated using different mobile technologies. The results indicate that this research could assist developers of MAR applications to implement applications more rapidly, without being at the location.

  9. Augmented spaces, a look beyond advertising

    Directory of Open Access Journals (Sweden)

    Oana Andreea Căplescu

    2014-03-01

    Full Text Available From billboards to urban screens and now to media facades, the augmentation of our cities has expanded, changing social behaviours and public space consumption. Smart buildings are being developed and, much like the smartphones, these hybrids are not only in sci-fi movies anymore. One of the main promoters of media facades and media architecture has been the advertising industry. But artists and designers showed the potential of different approaches, experimenting with digitally augmented spaces both indoors and outdoors. Going beyond the commercial aspect of being an advertising and branding tool, these hybrids offer a variety of uses. Questions of how and where we use them and how they can improve our life quality are discussed here emphasizing that we developed a media behaviour, adjusting our relation to the physical and information environments. I examine some of the most notable experiments outside of the advertising sphere, offering a base for future development of augmented spaces and opening the discussion over the language of new media architecture.

  10. Application results for an augmented video tracker

    Science.gov (United States)

    Pierce, Bill

    1991-08-01

    The Relay Mirror Experiment (RME) is a research program to determine the pointing accuracy and stability levels achieved when a laser beam is reflected by the RME satellite from one ground station to another. This paper reports the results of using a video tracker augmented with a quad cell signal to improve the RME ground station tracking system performance. The video tracker controls a mirror to acquire the RME satellite, and provides a robust low bandwidth tracking loop to remove line of sight (LOS) jitter. The high-passed, high-gain quad cell signal is added to the low bandwidth, low-gain video tracker signal to increase the effective tracking loop bandwidth, and significantly improves LOS disturbance rejection. The quad cell augmented video tracking system is analyzed, and the math model for the tracker is developed. A MATLAB model is then developed from this, and performance as a function of bandwidth and disturbances is given. Improvements in performance due to the addition of the video tracker and the augmentation with the quad cell are provided. Actual satellite test results are then presented and compared with the simulated results.

  11. Centers of Excellence Contribution to Knowledge Augmentation

    International Nuclear Information System (INIS)

    Mignone, O.

    2016-01-01

    Full text: Knowledge management is a key need of the nuclear industry to cope with the knowledge limited augmentation and the risks of knowledge loss due to a number of reasons, such as: staff attrition, organizational changes, upgraded technologies, new projects implementation, and the nuclear power evolution in recent years (i.e., post-Fukushima upgrades). This document describes the contribution of nuclear centers of excellence to knowledge augmentation. The effective implementation of nuclear centers of excellence is a key success factor for the knowledge management programme of nuclear organizations. This document, is based on a real example of operating organization approach in launching such initiative for staff knowledge augmentation and performance improvement. Eventually, any type of organizations in the nuclear sector could apply the proposed technique to reach better knowledge usage. The nuclear centers of excellence are a key knowledge management initiative for the learning organizations that are caring about organizational intellectual capital and striving for performance improvement. The nuclear centers of excellence can be realized as a forum to exchange ideas, knowledge, information, experiences; to collect lessons learned; and to identify areas for improvement where further organizational competence building is needed. Usual realization of this initiative is going through an active staff involvement in knowledge sharing in a form of different technical communities of practice focusing on specific knowledge domains. (author

  12. Critical Review

    DEFF Research Database (Denmark)

    Rosenbaum, Ralph K.; Olsen, Stig Irving

    2018-01-01

    Manipulation and mistakes in LCA studies are as old as the tool itself, and so is its critical review. Besides preventing misuse and unsupported claims, critical review may also help identifying mistakes and more justifiable assumptions as well as generally improve the quality of a study. It thus...... supports the robustness of an LCA and increases trust in its results and conclusions. The focus of this chapter is on understanding what a critical review is, how the international standards define it, what its main elements are, and what reviewer qualifications are required. It is not the objective...... of this chapter to learn how to conduct a critical review, neither from a reviewer nor from a practitioner perspective. The foundation of this chapter and the basis for any critical review of LCA studies are the International Standards ISO 14040:2006, ISO 14044:2006 and ISO TS 14071:2014....

  13. Comparison of the hydrogeology and water quality of a ground-water augmented lake with two non-augmented lakes in northwest Hillsborough County, Florida

    Science.gov (United States)

    Metz, Patricia A.; Sacks, Laura A.

    2002-01-01

    lakes, which is additional evidence of the limited confinement at Round Lake. A comparison of the water quality and lake-bottom sediments at the three lakes indicate that Round Lake is strongly influenced by the addition of large quantities of calcium-bicarbonate enriched augmentation water. Round Lake had higher alkalinity, pH, calcium and dissolved oxygen concentrations, specific conductance, and water clarity than the two non-augmented lakes. Round Lake was generally saturated to supersaturated with respect to calcite, but was undersaturated when augmentation was low and after high rainfall periods. Calcium carbonate has accumulated in the lake sediments from calcite precipitation, from macrophytes such as Nitella sp., and from the deposition of carbonate-rich mollusk shells, such as Planerbella sp., both of which thrive in the high alkalinity lake water. Lake-bottom sediments and aquatic biota at Round Lake had some of the highest radium-226 activity levels measured in a Florida lake. The high radium-226 levels (27 disintegrations per minute per dry mass) can be atrributed to augmenting the lake with ground water from the Upper Floridan aquifer. Although the ground water has relatively low levels of radium-226 (5.8 disintegrations per minute per liter), the large volumes of ground water added to the lake for more than 30 years have caused radium-226 to accumulate in the sediments and lake biota.The Round Lake basin had higher calcium and bicarbonate concentrations in the surficial aquifer than at the non-augmented lakes, which indicates the lateral leakage of calcium-bicarbonate enriched lake water into the surficial aquifer. Deuterium and oxygen-18 data indicated that water in well nests near the lake consists of as much as 100 percent lake leakage, and water from the augmentation well had a high percentage of recirculated lake water (between 59 and 73 percent lake leakage). The ground water surrounding Round Lake was undersaturated with respect to calcite

  14. Assessment of data-assisted prediction by inclusion of crosslinking/mass-spectrometry and small angle X-ray scattering data in the 12th Critical Assessment of protein Structure Prediction experiment.

    Science.gov (United States)

    Tamò, Giorgio E; Abriata, Luciano A; Fonti, Giulia; Dal Peraro, Matteo

    2018-03-01

    Integrative modeling approaches attempt to combine experiments and computation to derive structure-function relationships in complex molecular assemblies. Despite their importance for the advancement of life sciences, benchmarking of existing methodologies is rather poor. The 12 th round of the Critical Assessment of protein Structure Prediction (CASP) offered a unique niche to benchmark data and methods from two kinds of experiments often used in integrative modeling, namely residue-residue contacts obtained through crosslinking/mass-spectrometry (CLMS), and small-angle X-ray scattering (SAXS) experiments. Upon assessment of the models submitted by predictors for 3 targets assisted by CLMS data and 11 targets by SAXS data, we observed no significant improvement when compared to the best data-blind models, although most predictors did improve relative to their own data-blind predictions. Only for target Tx892 of the CLMS-assisted category and for target Ts947 of the SAXS-assisted category, there was a net, albeit mild, improvement relative to the best data-blind predictions. We discuss here possible reasons for the relatively poor success, which point rather to inconsistencies in the data sources rather than in the methods, to which a few groups were less sensitive. We conclude with suggestions that could improve the potential of data integration in future CASP rounds in terms of experimental data production, methods development, data management and prediction assessment. © 2017 Wiley Periodicals, Inc.

  15. Blind testing cross-linking/mass spectrometry under the auspices of the 11th critical assessment of methods of protein structure prediction (CASP11 [version 1; referees: 1 approved, 2 approved with reservations

    Directory of Open Access Journals (Sweden)

    Adam Belsom

    2016-12-01

    Full Text Available Determining the structure of a protein by any method requires various contributions from experimental and computational sides. In a recent study, high-density cross-linking/mass spectrometry (HD-CLMS data in combination with ab initio structure prediction determined the structure of human serum albumin (HSA domains, with an RMSD to X-ray structure of up to 2.5 Å, or 3.4 Å in the context of blood serum. This paper reports the blind test on the readiness of this technology through the help of Critical Assessment of protein Structure Prediction (CASP. We identified between 201-381 unique residue pairs at an estimated 5% FDR (at link level albeit with missing site assignment precision evaluation, for four target proteins. HD-CLMS proved reliable once crystal structures were released. However, improvements in structure prediction using cross-link data were slight. We identified two reasons for this. Spread of cross-links along the protein sequence and the tightness of the spatial constraints must be improved. However, for the selected targets even ideal contact data derived from crystal structures did not allow modellers to arrive at the observed structure. Consequently, the progress of HD-CLMS in conjunction with computational modeling methods as a structure determination method, depends on advances on both arms of this hybrid approach.

  16. Soft tissue augmentation 2006: filler fantasy.

    Science.gov (United States)

    Klein, Arnold William

    2006-01-01

    As an increasing number of patients seek esthetic improvement through minimally invasive procedures, interest in soft tissue augmentation and filling agents is at an all-time high. One reason for this interest is the availability of botulinum toxin type A, which works superbly in the upper face. The rejuvenation of the upper face has created much interest in injectable filling agents and implant techniques that work equally well in the restoration of the lower face. One of the central tenets of soft tissue augmentation is the concept of the three-dimensional face. The youthful face has a soft, full appearance, as opposed to the flat, pulled, two-dimensional look often achieved by more traditional surgical approaches. Injectable filling agents can augment and even at times, replace pulling. Additionally, with the lip as the focal center of the lower face, subtle lip enhancement is here to stay, and is in fact, the number one indication for injectable fillers. Moreover, minimally invasive soft tissue augmentation offers cosmetic enhancement without the cost and recovery time associated with more invasive procedures. As more and more physicians take interest in minimally invasive surgery, courses in cosmetic surgery techniques are becoming increasingly popular at the medical meetings of many specialties. Today, physicians have a much larger armamentarium of techniques and materials with which to improve facial contours, ameliorate wrinkles, and provide esthetic rejuvenation to the face. For a substance or device to be amenable for soft tissue augmentation in the medical community, it must meet certain criteria. It must have both a high "use" potential, producing cosmetically pleasing results with a minimum undesirable reactions, and have a low abuse potential in that widespread or incorrect or indiscriminate use would not result in significant morbidity. It must be nonteratogenic, noncarcinogenic, and nonmigratory. In addition, the agent must provide predictable

  17. Visualizing UAS-collected imagery using augmented reality

    Science.gov (United States)

    Conover, Damon M.; Beidleman, Brittany; McAlinden, Ryan; Borel-Donohue, Christoph C.

    2017-05-01

    One of the areas where augmented reality will have an impact is in the visualization of 3-D data. 3-D data has traditionally been viewed on a 2-D screen, which has limited its utility. Augmented reality head-mounted displays, such as the Microsoft HoloLens, make it possible to view 3-D data overlaid on the real world. This allows a user to view and interact with the data in ways similar to how they would interact with a physical 3-D object, such as moving, rotating, or walking around it. A type of 3-D data that is particularly useful for military applications is geo-specific 3-D terrain data, and the visualization of this data is critical for training, mission planning, intelligence, and improved situational awareness. Advances in Unmanned Aerial Systems (UAS), photogrammetry software, and rendering hardware have drastically reduced the technological and financial obstacles in collecting aerial imagery and in generating 3-D terrain maps from that imagery. Because of this, there is an increased need to develop new tools for the exploitation of 3-D data. We will demonstrate how the HoloLens can be used as a tool for visualizing 3-D terrain data. We will describe: 1) how UAScollected imagery is used to create 3-D terrain maps, 2) how those maps are deployed to the HoloLens, 3) how a user can view and manipulate the maps, and 4) how multiple users can view the same virtual 3-D object at the same time.

  18. Cytochalasin B augments diacylglycerol levels in stimulated neutrophils

    International Nuclear Information System (INIS)

    Honeycutt, P.J.; Niedel, J.

    1986-01-01

    Diacylglycerol (DG) has gained wide acceptance as an important second messenger and intracellular activator of protein kinase C, but few studies have directly measured DG levels in cells or tissues. The authors measured the mass of DG in lipid extracts from normal human neutrophils by quantitative conversion of DG to [ 32 P] phosphatidic acid using E. coli DG kinase. The chemotactic peptide N-formyl-Met-Leu-Phe (fMLP) stimulated a transient 30% rise in DG that was maximal at 30 to 45 sec and returned to the basal level of 150 picomoles/10 7 cells by one min. This initial peak was followed by a slower, more prolonged 30% increase in DG that was maximal at 20 min. Cytochalasin B (CB) augments many biological responses of neutrophils to fMLP, including superoxide production and lysosomal enzyme release. CB alone caused no change in basal DG levels, but in the presence of CB, fMLP stimulated a rapid, large, and persistent DG response. DG levels increased to 290% of basal at 5 min with a t1/2 = 45 sec. The DG response to fMLP was maximal at 5 to 10 μm CB and 1 μM fMLP. The DG response to optimal fMLP and CB concentrations was decreased 40% by an fMLP antagonist, and no response was elicited by an inactive fMLP analog and CB. Protein kinase C has been implicated in fMLP-stimulated superoxide production and lysosomal enzyme release. These data are consistent with the hypothesis that CB may effect augmentation of biological responses by increasing DG levels

  19. Alpha-1-antitrypsin augmentation therapy in deficient individuals enrolled in the Alpha-1 Foundation DNA and Tissue Bank

    Directory of Open Access Journals (Sweden)

    Adriano R Tonelli

    2009-12-01

    Full Text Available Adriano R Tonelli1, Farshid Rouhani1, Ning Li2, Pam Schreck1, Mark L Brantly11Alpha-1 Research Program, Division of Pulmonary, Critical Care and Sleep Medicine, Department of Internal Medicine, 2Department of Epidemiology and Biostatistics, University of Florida, Gainesville, Florida, USAIntroduction: Intravenous augmentation therapy with purified intravenous alpha-1 antitrypsin replaces the deficient protein and is the only currently approved treatment for alpha-1 antitrypsin deficiency (AATD related lung disease. While augmentation therapy has been available for more than 20 years, there are a limited number of studies evaluating the effect of augmentation on lung function.Material and methods: We examined the decline in forced expiratory volume in one second (FEV1 in patients enrolled in the Alpha-1 Foundation DNA and Tissue Bank in relation to the use or not of alpha-1 antitrypsin augmentation therapy. For the purpose of our analysis we included 164 patients with AATD and PI ZZ genotype.Results: Mean age of the patients was 60 years, 52% were females, 94% were white and 78% ex-smokers. The mean FEV1 at baseline was 1.7 L and the mean FEV1 % of predicted was 51.3%. The mean follow-up time was 41.7 months. A total of 124 (76% patients received augmentation therapy (augmented group while 40 patients (24% did not received it (non-augmented group. When adjusted by age at baseline, sex, smoking status, baseline FEV1 % of predicted, the mean overall change in FEV1 was 47.6 mL/year, favoring the augmented group (?FEV1 10.6 ± 21.4 mL/year in comparison with the non-augmented group (?FEV1 −36.96 ± 12.1 mL/year (P = 0.05. Beneficial ?FEV1 were observed in ex-smokers and the group with initial FEV1 % of predicted of <50%. No differences were observed in mortality.Conclusions: In conclusion, augmentation therapy improves lung function in subjects with AATD when adjusted by age, gender, smoking status and baseline FEV1 % of predicted. The beneficial

  20. Critical Arts

    African Journals Online (AJOL)

    both formal and informal) in culture and social theory. CRITICAL ARTS aims to challenge and ... Book Review: Brian McNair, An Introduction to Political Communication (3rd edition), London: Routledge, 2003, ISBN 0415307082, 272pp. Phil Joffe ...

  1. Critical Proximity

    Directory of Open Access Journals (Sweden)

    Jane Simon

    2010-09-01

    Full Text Available This essay considers how written language frames visual objects. Drawing on Michel Foucault’s response to Raymond Roussel’s obsessive description, the essay proposes a model of criticism where description might press up against its objects. This critical closeness is then mapped across the conceptual art practice and art criticism of Ian Burn. Burn attends to the differences between seeing and reading, and considers the conditions which frame how we look at images, including how we look at, and through words. The essay goes on to consider Meaghan Morris’s writing on Lynn Silverman’s photographs. Both Morris and Burn offer an alternative to a parasitic model of criticism and enact a patient way of looking across and through visual landscapes.

  2. Critical proximity

    Directory of Open Access Journals (Sweden)

    Simon, Jane

    2010-01-01

    Full Text Available This essay considers how written language frames visual objects. Drawing on Michel Foucault’s response to Raymond Roussel’s obsessive description, the essay proposes a model of criticism where description might press up against its objects. This critical closeness is then mapped across the conceptual art practice and art criticism of Ian Burn. Burn attends to the differences between seeing and reading, and considers the conditions which frame how we look at images, including how we look at, and through words. The essay goes on to consider Meaghan Morris’s writing on Lynn Silverman’s photographs. Both Morris and Burn offer an alternative to a parasitic model of criticism and enact a patient way of looking across and through visual landscapes.

  3. Towards an Understanding of the Effects of Augmented Reality Games on Disaster Management

    OpenAIRE

    Luczak-Roesch, Markus

    2017-01-01

    Location-based augmented reality games have entered the mainstream with the nearly overnight success of Niantic's Pok\\'emon Go. Unlike traditional video games, the fact that players of such games carry out actions in the external, physical world to accomplish in-game objectives means that the large-scale adoption of such games motivate people, en masse, to do things and go places they would not have otherwise done in unprecedented ways. The social implications of such mass-mobilisation of ind...

  4. The Point Mass Concept

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2011-04-01

    Full Text Available A point-mass concept has been elaborated from the equations of the gravitational field. One application of these deductions results in a black hole configuration of the Schwarzschild type, having no electric charge and no angular momentum. The critical mass of a gravitational collapse with respect to the nuclear binding energy is found to be in the range of 0.4 to 90 solar masses. A second application is connected with the spec- ulation about an extended symmetric law of gravitation, based on the options of positive and negative mass for a particle at given positive energy. This would make masses of equal polarity attract each other, while masses of opposite polarity repel each other. Matter and antimatter are further proposed to be associated with the states of positive and negative mass. Under fully symmetric conditions this could provide a mechanism for the separation of antimatter from matter at an early stage of the universe.

  5. The Point Mass Concept

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2011-04-01

    Full Text Available A point-mass concept has been elaborated from the equations of the gravitational field. One application of these deductions results in a black hole configuration of the Schwarzschild type, having no electric charge and no angular momentum. The critical mass of a gravitational collapse with respect to the nuclear binding energy is found to be in the range of 0.4 to 90 solar masses. A second application is connected with the speculation about an extended symmetric law of gravitation, based on the options of positive and negative mass for a particle at given positive energy. This would make masses of equal polarity attract each other, while masses of opposite polarity repel each other. Matter and antimatter are further proposed to be associated with the states of positive and negative mass. Under fully symmetric conditions this could provide a mechanism for the separation of antimatter from matter at an early stage of the universe.

  6. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    Directory of Open Access Journals (Sweden)

    Liang CL

    2015-03-01

    Full Text Available Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebral augmentation.Methods: We performed a retrospective, nationwide, population-based longitudinal observation study, using the National Health Insurance Research Database (NHIRD of Taiwan. All patients who received vertebral augmentation for vertebral compression fractures were evaluated. The collected data included patient characteristics (demographics, comorbidities, and medication exposure and repeat vertebral augmentation. Kaplan–Meier and stratified Cox proportional hazard regressions were performed for analyses.Results: The overall incidence of repeat vertebral augmentation was 11.3% during the follow-up until 2010. Patients with the following characteristics were at greater risk for repeat vertebral augmentation: female sex (AOR=1.24; 95% confidence interval [CI]: 1.10–2.36, advanced age (AOR=1.60; 95% CI: 1.32–2.08, diabetes mellitus (AOR=4.31; 95% CI: 4.05–5.88, cerebrovascular disease (AOR=4.09; 95% CI: 3.44–5.76, dementia (AOR=1.97; 95% CI: 1.69–2.33, blindness or low vision (AOR=3.72; 95% CI: 2.32–3.95, hypertension (AOR=2.58; 95% CI: 2.35–3.47, and hyperlipidemia (AOR=2.09; 95% CI: 1.67–2.22. Patients taking calcium/ vitamin D (AOR=2.98; 95% CI: 1.83–3.93, bisphosphonates (AOR=2.11; 95% CI: 1.26–2.61, or calcitonin (AOR=4.59; 95% CI: 3.40–5.77 were less likely to undergo repeat vertebral augmentation; however, those taking steroids (AOR=7.28; 95% CI: 6.32–8.08, acetaminophen (AOR=3.54; 95% CI: 2.75–4.83, or nonsteroidal

  7. Augmented Reality Edugame Senjata Tradisional Indonesia

    Directory of Open Access Journals (Sweden)

    Endah Sudarmilah

    2015-12-01

    Full Text Available Senjata tradisional merupakan sebuah produk yang berkaitan erat dengan budaya suatu masyarakat. Selain berfungsi sebagai senjata, senjata tradisional telah menjadi identitas suatu bangsa yang membantu memperkaya khasanah budaya nusantara. Pendidikan di Indonesia berpedoman pada kurikulum baru yang disebut kurikulum 2013. Salah satu materi kurikulum mengarahkan siswa untuk belajar tentang senjata tradisional bentuk senjata tradisional. Berdasarkan pada masalah yang timbul dari kurikulum 2013, peneliti menyiapkan metode pembelajaran dengan menggabungkan Augmented Reality (AR dengan permainan edukasi berbasis adventure game dalam menyajikan materi keanekaragaman budaya Indonesia, terutama untuk senjata tradisional sehingga siswa memiliki semangat dalam belajar tentang keanekaragaman budaya Indonesia khusunya senjata.

  8. Electromagnetic acceleration studies with augmented rails

    International Nuclear Information System (INIS)

    Maruo, T.; Fujioka, K.; Nagaoka, K.; Okamoto, A.; Ikuta, K.; Nemoto, K.

    1991-01-01

    A comparative study of electromagnetic acceleration in the rail-type accelerators with two kinds of rail geometry was carried out experimentally. The accelerators were energized by 200kJ capacitor bank and the weight of loaded projectiles was about 1.3 grams with 10mm x 10mm square bore. The attained velocity was 4.3km/s in the augmented accelerator, while it was 3.8km/s in the classical device. In this paper these differences in attained velocity are briefly discussed. A theoretical understanding of the rail erosion is also described

  9. Terrain Simplification Research in Augmented Scene Modeling

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    environment. As one of the most important tasks in augmented scene modeling, terrain simplification research has gained more and more attention. In this paper, we mainly focus on point selection problem in terrain simplification using triangulated irregular network. Based on the analysis and comparison of traditional importance measures for each input point, we put forward a new importance measure based on local entropy. The results demonstrate that the local entropy criterion has a better performance than any traditional methods. In addition, it can effectively conquer the "short-sight" problem associated with the traditional methods.

  10. A Survey on Applications of Augmented Reality

    OpenAIRE

    Andrea Sanna; Federico Manuri

    2016-01-01

    The term Augmented Reality (AR) refers to a set of technologies and devices able to enhance and improve human perception, thus bridging the gap between real and virtual space. Physical and artificial objects are mixed together in a hybrid space where the user can move without constraints. This mediated reality is spread in our everyday life: work, study, training, relaxation, time spent traveling are just some of the moments in which you can use AR applications.This paper aims to provide an o...

  11. Augmented Reality Sultan Deli Di Istana Maimun

    OpenAIRE

    Nathan P. L

    2016-01-01

    Augmented reality is a technology that can provide visualization of 3D models. Based from that technology, the modeling from a picture of Sultan Deli Istana Maimun can be applied to restore photos Sultan Deli into a three-dimensional model. This is due to Sultan Deli which is one of the important figures in the history of Medan city known less by the public. Submission of Deli Sultanate history only through such two-dimensional images and other archives. The photo shows the Sultan of Deli ev...

  12. Augmenting Your Own Reality: Student Authoring of Science-Based Augmented Reality Games

    Science.gov (United States)

    Klopfer, Eric; Sheldon, Josh

    2010-01-01

    Augmented Reality (AR) simulations superimpose a virtual overlay of data and interactions onto a real-world context. The simulation engine at the heart of this technology is built to afford elements of game play that support explorations and learning in students' natural context--their own community and surroundings. In one of the more recent…

  13. Augmented reality in bone tumour resection

    Science.gov (United States)

    Park, Y. K.; Gupta, S.; Yoon, C.; Han, I.; Kim, H-S.; Choi, H.; Hong, J.

    2017-01-01

    Objectives We evaluated the accuracy of augmented reality (AR)-based navigation assistance through simulation of bone tumours in a pig femur model. Methods We developed an AR-based navigation system for bone tumour resection, which could be used on a tablet PC. To simulate a bone tumour in the pig femur, a cortical window was made in the diaphysis and bone cement was inserted. A total of 133 pig femurs were used and tumour resection was simulated with AR-assisted resection (164 resection in 82 femurs, half by an orthropaedic oncology expert and half by an orthopaedic resident) and resection with the conventional method (82 resection in 41 femurs). In the conventional group, resection was performed after measuring the distance from the edge of the condyle to the expected resection margin with a ruler as per routine clinical practice. Results The mean error of 164 resections in 82 femurs in the AR group was 1.71 mm (0 to 6). The mean error of 82 resections in 41 femurs in the conventional resection group was 2.64 mm (0 to 11) (p Augmented reality in bone tumour resection: An experimental study. Bone Joint Res 2017;6:137–143. PMID:28258117

  14. Augmented reality for the surgeon: Systematic review.

    Science.gov (United States)

    Yoon, Jang W; Chen, Robert E; Kim, Esther J; Akinduro, Oluwaseun O; Kerezoudis, Panagiotis; Han, Phillip K; Si, Phong; Freeman, William D; Diaz, Roberto J; Komotar, Ricardo J; Pirris, Stephen M; Brown, Benjamin L; Bydon, Mohamad; Wang, Michael Y; Wharen, Robert E; Quinones-Hinojosa, Alfredo

    2018-04-30

    Since the introduction of wearable head-up displays, there has been much interest in the surgical community adapting this technology into routine surgical practice. We used the keywords augmented reality OR wearable device OR head-up display AND surgery using PubMed, EBSCO, IEEE and SCOPUS databases. After exclusions, 74 published articles that evaluated the utility of wearable head-up displays in surgical settings were included in our review. Across all studies, the most common use of head-up displays was in cases of live streaming from surgical microscopes, navigation, monitoring of vital signs, and display of preoperative images. The most commonly used head-up display was Google Glass. Head-up displays enhanced surgeons' operating experience; common disadvantages include limited battery life, display size and discomfort. Due to ergonomic issues with dual-screen devices, augmented reality devices with the capacity to overlay images onto the surgical field will be key features of next-generation surgical head-up displays. Copyright © 2018 John Wiley & Sons, Ltd.

  15. Boosting physics education through mobile augmented reality

    Science.gov (United States)

    Crǎciun, Dana; Bunoiu, Mǎdǎlin

    2017-12-01

    The integration of collaborative applications, based on modern learning technologies and the Internet, of various visualization techniques and digital strategies in open, flexible modern learning environments which facilitate access to resources, represents a challenge for physics teachers in Romania in general, and for novice teachers in particular. Although large efforts have been made worldwide to invest in educational technologies, their impact on the students' learning outcomes is quite modest. In this paper, we describe and analyze various curricular and extracurricular activities specifically designed for and undertaken by pre-service physics teachers. These activities employ new educational technologies, mobile augmented reality (MAR) and are based on modern teaching and learning theories. MAR is an extension for mobile devices of augmented reality, an interactive and in real time combination, of real and virtual objects overlaid in the real environment. The obtained results show that pre-service physics teachers are confident in using MAR in their teaching and learning activities, and consider that the activities performed helped them develop the skills necessary for science teachers in a technology-based society and to reflect upon the role of technology in the current Romanian educational context.

  16. Virtual patients in a real clinical context using augmented reality: impact on antibiotics prescription behaviors.

    Science.gov (United States)

    Nifakos, Sokratis; Zary, Nabil

    2014-01-01

    The research community has called for the development of effective educational interventions for addressing prescription behaviour since antimicrobial resistance remains a global health issue. Examining the potential to displace the educational process from Personal Computers to Mobile devices, in this paper we investigated a new method of integration of Virtual Patients into Mobile devices with augmented reality technology, enriching the practitioner's education in prescription behavior. Moreover, we also explored which information are critical during the prescription behavior education and we visualized these information on real context with augmented reality technology, simultaneously with a running Virtual Patient's scenario. Following this process, we set the educational frame of experiential knowledge to a mixed (virtual and real) environment.

  17. Mobile Augmented Note-taking to Support Operating Physical Devices

    OpenAIRE

    Liu , Can; Diehl , Jonathan; Huot , Stéphane; Borchers , Jan

    2011-01-01

    Mobile Augmented Reality: Design Issues and Opportunities - 1st Workshop on Mobile Augmented Reality, MobileHCI 2011; In this paper we propose an approach to assist operating physical devices with mobile augmented reality techniques. We propose ideas of interaction techniques, which allow users to put self-authored information as notes onto physical objects. We present the design of two example applications aiming at solving problems from different aspects of physical operations.

  18. Guidelines for user interactions in mobile augmented reality

    OpenAIRE

    Ortman, Erik; Swedlund, Kenneth

    2012-01-01

    Over the last couple of years the field of Augmented Reality has transformed from something mainly seen in academic researchinto several examples of big commercially successful products, and the widespread use of highly capable mobile devices has greatly helped accelerate this trend. The powerful sensors in modern handsets enable designers to bring Augmented Reality implementations to the hands ofthe users.This thesis examines how Augmented Reality can be implemented onmobile platforms, mainl...

  19. Augmented reality tools and learning practice in mobile-learning

    OpenAIRE

    Figueiredo, Mauro; Gomes, José; Gomes, Cristina; Lopes, João

    2014-01-01

    There are many augmented reality (AR) applications available that can be used to create educational contents for these mobile devices. This paper surveys the most popular augmented reality applications and we select AR eco-systems to be used in daily teaching activities which are user friendly, do not require programming skills and are free. Different augmented reality technologies are explored in this paper to create teaching activities with animations, videos and other information to be sho...

  20. Augmented reality mobile application for overlaying images on textiles

    OpenAIRE

    Brinza, Veronica

    2016-01-01

    Augmented reality is one the relatively new and fast growing branches in modern informatics. It incorporates in simple people lives on a lot of different levels. It can be used everywhere starting from the simple checking of your email and ending up with a complex augmented reality video games or augmented reality learning. From the ancient times actors tried to immerse the spectators in world of the performance using decoration and costumed. In XVIII – XIX centuries pictures w...

  1. Towards an interactive medical system by augmented reality

    OpenAIRE

    Khawla Ben Abderrahim; Mohamed Kallel; M.S. Bouhlel

    2013-01-01

    Augmented reality is a computer field that progresses rapidly. Its principle is to mix the real world and the virtual world. Many applications already use augmented reality, particularly the medical field. Medical image allows doctors to make diagnosis of the patient. This diagnosis allows him to make the best decision without committing professional mistakes that can cause problems. Hence the idea of integrating augmented reality with medical image analysis to help the doctor to make the bes...

  2. 1.5 T augmented reality navigated interventional MRI: paravertebral sympathetic plexus injections.

    Science.gov (United States)

    Marker, David R; U Thainual, Paweena; Ungi, Tamas; Flammang, Aaron J; Fichtinger, Gabor; Iordachita, Iulian I; Carrino, John A; Fritz, Jan

    2017-01-01

    The high contrast resolution and absent ionizing radiation of interventional magnetic resonance imaging (MRI) can be advantageous for paravertebral sympathetic nerve plexus injections. We assessed the feasibility and technical performance of MRI-guided paravertebral sympathetic injections utilizing augmented reality navigation and 1.5 T MRI scanner. A total of 23 bilateral injections of the thoracic (8/23, 35%), lumbar (8/23, 35%), and hypogastric (7/23, 30%) paravertebral sympathetic plexus were prospectively planned in twelve human cadavers using a 1.5 Tesla (T) MRI scanner and augmented reality navigation system. MRI-conditional needles were used. Gadolinium-DTPA-enhanced saline was injected. Outcome variables included the number of control magnetic resonance images, target error of the needle tip, punctures of critical nontarget structures, distribution of the injected fluid, and procedure length. Augmented-reality navigated MRI guidance at 1.5 T provided detailed anatomical visualization for successful targeting of the paravertebral space, needle placement, and perineural paravertebral injections in 46 of 46 targets (100%). A mean of 2 images (range, 1-5 images) were required to control needle placement. Changes of the needle trajectory occurred in 9 of 46 targets (20%) and changes of needle advancement occurred in 6 of 46 targets (13%), which were statistically not related to spinal regions (P = 0.728 and P = 0.86, respectively) and cadaver sizes (P = 0.893 and P = 0.859, respectively). The mean error of the needle tip was 3.9±1.7 mm. There were no punctures of critical nontarget structures. The mean procedure length was 33±12 min. 1.5 T augmented reality-navigated interventional MRI can provide accurate imaging guidance for perineural injections of the thoracic, lumbar, and hypogastric sympathetic plexus.

  3. Critical Vidders

    DEFF Research Database (Denmark)

    Svegaard, Robin Sebastian Kaszmarczyk

    2015-01-01

    This article will introduce and take a look at a specific subset of the fan created remix videos known as vids, namely those that deal with feminist based critique of media. Through examples, it will show how fans construct and present their critique, and finally broach the topic of the critical ...

  4. Bone Augmentation in Rabbit Tibia Using Microfixed Cobalt-Chromium Membranes with Whole Blood and Platelet-Rich Plasma

    Directory of Open Access Journals (Sweden)

    Oscar A. Decco

    2015-07-01

    Full Text Available Background: Bone augmentation is a subject of intensive investigation in regenerative bone medicine and constitutes a clinical situation in which autogenous bone grafts or synthetic materials are used to aid new bone formation. Method: Based on a non-critical defect, Co-Cr barrier membranes were placed on six adult Fauve de Bourgogne rabbits, divided into two groups: whole blood and PRP. Three densitometric controls were performed during the experiment. The animals were euthanized at 30, 45, 60, and 110 days. The presence of newly formed bone was observed. Samples for histological studies were taken from the augmentation center. Results: External and internal bone tissue augmentation was observed in almost all cases. Significant differences between PRP- and whole blood–stimulated bone augmentation were not observed. At 60 days, bones with PRP presented higher angiogenesis, which may indicate more proliferation and cellular activity. Conclusion: PRP activates the bone regeneration process under optimized conditions by stimulation of osteoblast proliferation after six weeks, when a significant difference in cellular activity was observed. Membranes could stimulate bone augmentation at the site of placement and in the surrounding areas.

  5. Critical reading and critical thinking Critical reading and critical thinking

    Directory of Open Access Journals (Sweden)

    Loni Kreis Taglieber

    2008-04-01

    Full Text Available The purpose of this paper is to provide, for L1 and L2 reading and writing teachers, a brief overview of the literature about critical reading and higher level thinking skills. The teaching of these skills is still neglected in some language classes in Brazil, be it in L1 or in L2 classes. Thus, this paper may also serve as a resource guide for L1 and/or L2 reading and writing teachers who want to incorporate critical reading and thinking into their classes. In modern society, even in everyday life people frequently need to deal with complicated public and political issues, make decisions, and solve problems. In order to do this efficiently and effectively, citizens must be able to evaluate critically what they see, hear, and read. Also, with the huge amount of printed material available in all areas in this age of “information explosion” it is easy to feel overwhelmed. But often the information piled up on people’s desks and in their minds is of no use due to the enormous amount of it. The purpose of this paper is to provide, for L1 and L2 reading and writing teachers, a brief overview of the literature about critical reading and higher level thinking skills. The teaching of these skills is still neglected in some language classes in Brazil, be it in L1 or in L2 classes. Thus, this paper may also serve as a resource guide for L1 and/or L2 reading and writing teachers who want to incorporate critical reading and thinking into their classes. In modern society, even in everyday life people frequently need to deal with complicated public and political issues, make decisions, and solve problems. In order to do this efficiently and effectively, citizens must be able to evaluate critically what they see, hear, and read. Also, with the huge amount of printed material available in all areas in this age of “information explosion” it is easy to feel overwhelmed. But often the information piled up on people’s desks and in their minds is of

  6. Pseudomonas aeruginosa ExoU augments neutrophil transepithelial migration.

    Science.gov (United States)

    Pazos, Michael A; Lanter, Bernard B; Yonker, Lael M; Eaton, Alex D; Pirzai, Waheed; Gronert, Karsten; Bonventre, Joseph V; Hurley, Bryan P

    2017-08-01

    Excessive neutrophil infiltration of the lungs is a common contributor to immune-related pathology in many pulmonary disease states. In response to pathogenic infection, airway epithelial cells produce hepoxilin A3 (HXA3), initiating neutrophil transepithelial migration. Migrated neutrophils amplify this recruitment by producing a secondary gradient of leukotriene B4 (LTB4). We sought to determine whether this two-step eicosanoid chemoattractant mechanism could be exploited by the pathogen Pseudomonas aeruginosa. ExoU, a P. aeruginosa cytotoxin, exhibits phospholipase A2 (PLA2) activity in eukaryotic hosts, an enzyme critical for generation of certain eicosanoids. Using in vitro and in vivo models of neutrophil transepithelial migration, we evaluated the impact of ExoU expression on eicosanoid generation and function. We conclude that ExoU, by virtue of its PLA2 activity, augments and compensates for endogenous host neutrophil cPLA2α function, leading to enhanced transepithelial migration. This suggests that ExoU expression in P. aeruginosa can circumvent immune regulation at key signaling checkpoints in the neutrophil, resulting in exacerbated neutrophil recruitment.

  7. Pseudomonas aeruginosa ExoU augments neutrophil transepithelial migration.

    Directory of Open Access Journals (Sweden)

    Michael A Pazos

    2017-08-01

    Full Text Available Excessive neutrophil infiltration of the lungs is a common contributor to immune-related pathology in many pulmonary disease states. In response to pathogenic infection, airway epithelial cells produce hepoxilin A3 (HXA3, initiating neutrophil transepithelial migration. Migrated neutrophils amplify this recruitment by producing a secondary gradient of leukotriene B4 (LTB4. We sought to determine whether this two-step eicosanoid chemoattractant mechanism could be exploited by the pathogen Pseudomonas aeruginosa. ExoU, a P. aeruginosa cytotoxin, exhibits phospholipase A2 (PLA2 activity in eukaryotic hosts, an enzyme critical for generation of certain eicosanoids. Using in vitro and in vivo models of neutrophil transepithelial migration, we evaluated the impact of ExoU expression on eicosanoid generation and function. We conclude that ExoU, by virtue of its PLA2 activity, augments and compensates for endogenous host neutrophil cPLA2α function, leading to enhanced transepithelial migration. This suggests that ExoU expression in P. aeruginosa can circumvent immune regulation at key signaling checkpoints in the neutrophil, resulting in exacerbated neutrophil recruitment.

  8. Soldier-worn augmented reality system for tactical icon visualization

    Science.gov (United States)

    Roberts, David; Menozzi, Alberico; Clipp, Brian; Russler, Patrick; Cook, James; Karl, Robert; Wenger, Eric; Church, William; Mauger, Jennifer; Volpe, Chris; Argenta, Chris; Wille, Mark; Snarski, Stephen; Sherrill, Todd; Lupo, Jasper; Hobson, Ross; Frahm, Jan-Michael; Heinly, Jared

    2012-06-01

    This paper describes the development and demonstration of a soldier-worn augmented reality system testbed that provides intuitive 'heads-up' visualization of tactically-relevant geo-registered icons. Our system combines a robust soldier pose estimation capability with a helmet mounted see-through display to accurately overlay geo-registered iconography (i.e., navigation waypoints, blue forces, aircraft) on the soldier's view of reality. Applied Research Associates (ARA), in partnership with BAE Systems and the University of North Carolina - Chapel Hill (UNC-CH), has developed this testbed system in Phase 2 of the DARPA ULTRA-Vis (Urban Leader Tactical, Response, Awareness, and Visualization) program. The ULTRA-Vis testbed system functions in unprepared outdoor environments and is robust to numerous magnetic disturbances. We achieve accurate and robust pose estimation through fusion of inertial, magnetic, GPS, and computer vision data acquired from helmet kit sensors. Icons are rendered on a high-brightness, 40°×30° field of view see-through display. The system incorporates an information management engine to convert CoT (Cursor-on-Target) external data feeds into mil-standard icons for visualization. The user interface provides intuitive information display to support soldier navigation and situational awareness of mission-critical tactical information.

  9. Critical Thresholds in Earth-System Dynamics

    Science.gov (United States)

    Rothman, D.

    2017-12-01

    The history of the Earth system is a story of change. Some changesare gradual and benign, but others, especially those associated withcatastrophic mass extinction, are relatively abrupt and destructive.What sets one group apart from the other? Here I hypothesize thatperturbations of Earth's carbon cycle lead to mass extinction if theyexceed either a critical rate at long time scales or a critical sizeat short time scales. By analyzing 31 carbon-isotopic events duringthe last 542 million years, I identify the critical rate with a limitimposed by mass conservation. Further analysis identifies thecrossover timescale separating fast from slow events with thetimescale of the ocean's homeostatic response to a change in pH. Theproduct of the critical rate and the crossover timescale then yieldsthe critical size. The modern critical size for the marine carboncycle is roughly similar to the mass of carbon that human activitieswill likely have added to the oceans by the year 2100.

  10. Criticality accident:

    International Nuclear Information System (INIS)

    Canavese, Susana I.

    2000-01-01

    A criticality accident occurred at 10:35 on September 30, 1999. It occurred in a precipitation tank in a Conversion Test Building at the JCO Tokai Works site in Tokaimura (Tokai Village) in the Ibaraki Prefecture of Japan. STA provisionally rated this accident a 4 on the seven-level, logarithmic International Nuclear Event Scale (INES). The September 30, 1999 criticality accident at the JCO Tokai Works Site in Tokaimura, Japan in described in preliminary, technical detail. Information is based on preliminary presentations to technical groups by Japanese scientists and spokespersons, translations by technical and non-technical persons of technical web postings by various nuclear authorities, and English-language non-technical reports from various news media and nuclear-interest groups. (author)

  11. Critical dynamics

    International Nuclear Information System (INIS)

    Dekker, H.

    1980-01-01

    It is shown how to solve the master equation for a Markov process including a critical point by means of successive approximations in terms of a small parameter. A critical point occurs if, by adjusting an externally controlled quantity, the system shows a transition from normal monostable to bistable behaviour. The fundamental idea of the theory is to separate the master equation into its proper irreducible part and a corrective remainder. The irreducible or zeroth order stochastic approximation will be a relatively simple Fokker-Planck equation that contains the essential features of the process. Once the solution of this irreducible equation is known, the higher order corrections in the original master equation can be incorporated in a systematic manner. (Auth.)

  12. Digital Facial Augmentation for Interactive Entertainment

    Directory of Open Access Journals (Sweden)

    Naoto Hieda

    2015-08-01

    Full Text Available Digital projection technology allows for effective and entertaining spatial augmented reality applications. Leveraging the capabilities of reasonably accurate object tracking using commodity cameras and/or depth sensors to determine the 3D position and pose of objects in real time, it is possible to project dynamic graphical content on arbitrary surfaces, such as a person’s face. Coupling these capabilities with a simple drawing application, participants can have the experience of "painting" on someone’s face, or even on their own, by observing the projection in a mirror. Similarly, integrating 2D rigid-body, fluid and gravity simulation, one may interact with virtual objects projected on their own face or body.

  13. Augmented reality. Fundamentals and nuclear related applications

    International Nuclear Information System (INIS)

    Ishii, Hirotake

    2010-01-01

    In recent years, Augmented Reality (AR) has attracted considerable interest from both academia and industry. Virtual Reality enables users to interact only with virtual objects in a virtual environment, but AR enables users to interact with both virtual objects and real objects in the real world. This feature supports application of AR to various fields such as education, driving, entertainment, and navigation. Especially, by application of AR to support workers in nuclear power plants, it is expected that working time and human error can be decreased. However, many problems remain unsolved to apply AR to real fields. In this lecture note, fundamental knowledge of AR is presented first including the overview of elemental technologies to realize AR. Then various AR applications to nuclear fields are described. Finally, future prospects are given. (author)

  14. Out of the Cube: Augmented Rubik's Cube

    Directory of Open Access Journals (Sweden)

    Oriel Bergig

    2011-01-01

    Full Text Available Computer gaming habits have a tendency to evolve with technology, the best being ones that immerse both our imagination and intellect. Here, we describe a new game platform, an Augmented Reality Rubik's cube. The cube acts simultaneously as both the controller and the game board. Gameplay is controlled by the cube, and game assets are rendered on top of it. Shuffling and tilting operations on the cube are mapped to game interaction. We discuss the game design decisions involved in developing a game for this platform, as well as the technological challenges in implementing it. Ultimately, we describe two games and discuss the conclusions of an informal user study based on those games.

  15. Augmented Reality: Advances in Diagnostic Imaging

    Directory of Open Access Journals (Sweden)

    David B. Douglas

    2017-11-01

    Full Text Available In recent years, advances in medical imaging have provided opportunities for enhanced diagnosis and characterization of diseases including cancer. The improved spatial resolution provides outstanding detail of intricate anatomical structures, but has challenged physicians on how to effectively and efficiently review the extremely large datasets of over 1000 images. Standard volume rendering attempts to tackle this problem as it provides a display of 3D information on a flat 2D screen, but it lacks depth perception and has poor human–machine interface (HMI. Most recently, Augmented Reality/Virtual Reality (AR/VR with depth 3-dimensional (D3D imaging provides depth perception through binocular vision, head tracking for improved HMI and other key AR features. In this article, we will discuss current and future medical applications of AR including assessing breast cancer. We contend that leveraging AR technology may enhance diagnosis, save cost and improve patient care.

  16. A telescope with augmented reality functions

    Science.gov (United States)

    Hou, Qichao; Cheng, Dewen; Wang, Qiwei; Wang, Yongtian

    2016-10-01

    This study introduces a telescope with virtual reality (VR) and augmented reality (AR) functions. In this telescope, information on the micro-display screen is integrated to the reticule of telescope through a beam splitter and is then received by the observer. The design and analysis of telescope optical system with AR and VR ability is accomplished and the opto-mechanical structure is designed. Finally, a proof-of-concept prototype is fabricated and demonstrated. The telescope has an exit pupil diameter of 6 mm at an eye relief of 19 mm, 6° field of view, 5 to 8 times visual magnification , and a 30° field of view of the virtual image.

  17. Augmenting Satellite Precipitation Estimation with Lightning Information

    Energy Technology Data Exchange (ETDEWEB)

    Mahrooghy, Majid [Mississippi State University (MSU); Anantharaj, Valentine G [ORNL; Younan, Nicolas H. [Mississippi State University (MSU); Petersen, Walter A. [NASA Marshall Space Flight Center, Huntsville, AL; Hsu, Kuo-Lin [University of California, Irvine; Behrangi, Ali [Jet Propulsion Laboratory, Pasadena, CA; Aanstoos, James [Mississippi State University (MSU)

    2013-01-01

    We have used lightning information to augment the Precipitation Estimation from Remotely Sensed Imagery using an Artificial Neural Network - Cloud Classification System (PERSIANN-CCS). Co-located lightning data are used to segregate cloud patches, segmented from GOES-12 infrared data, into either electrified (EL) or non-electrified (NEL) patches. A set of features is extracted separately for the EL and NEL cloud patches. The features for the EL cloud patches include new features based on the lightning information. The cloud patches are classified and clustered using self-organizing maps (SOM). Then brightness temperature and rain rate (T-R) relationships are derived for the different clusters. Rain rates are estimated for the cloud patches based on their representative T-R relationship. The Equitable Threat Score (ETS) for daily precipitation estimates is improved by almost 12% for the winter season. In the summer, no significant improvements in ETS are noted.

  18. A ''quadratized'' augmented plane wave method

    International Nuclear Information System (INIS)

    Smrcka, L.

    1982-02-01

    The exact radial solution inside the muffin-tin sphere is replaced by its Taylor expansion with respect to the energy, truncated after the quadratic term. Making use of it the energy independent augmented plane waves are formed which lead to the secular equations linear in energy. The method resembles the currently used linearized APW method but yields higher accuracy. The analysis of solution inside one muffin-tin sphere shows that the eigenvalue error is proportional to (E-E 0 ) 6 as compared with (E-E 0 ) 4 for LAPW. The error of eigenfunctions is (E-E 0 ) 3 ((E-E 0 ) 2 for LAPW). These conclusions are confirmed by direct numerical calculation of band structure of Cu and Al. (author)

  19. Novel Augmentation Strategies in Major Depression

    DEFF Research Database (Denmark)

    Martiny, Klaus

    2017-01-01

    Hypothesis The hypotheses of all the four included studies share the common idea that it is possible to augment the effect of antidepressant drug treatment by applying different interventions and with each intervention attain a clinically meaningful better effect compared to a control condition......, and with minor side effects, thus improving the short- and medium-term outcome in major depression. Procedures Study design The basic study design has been the double blind randomised controlled trial (RCT). In the light therapy study, all patients were treated with sertraline for the whole of the study duration...... open psychiatric wards. Only a few patients were re-cruited through advertisements (in the PEMF and Chronos studies). Inclusion criteria Inclusion criteria were major depression according to the DSM-IV, including a depressive episode as part of a bipolar disorder. For the PEMF study, treatment...

  20. [Penile augmentation using acellular dermal matrix].

    Science.gov (United States)

    Zhang, Jin-ming; Cui, Yong-yan; Pan, Shu-juan; Liang, Wei-qiang; Chen, Xiao-xuan

    2004-11-01

    Penile enhancement was performed using acellular dermal matrix. Multiple layers of acellular dermal matrix were placed underneath the penile skin to enlarge its girth. Since March 2002, penile augmentation has been performed on 12 cases using acellular dermal matrix. Postoperatively all the patients had a 1.3-3.1 cm (2.6 cm in average) increase in penile girth in a flaccid state. The penis had normal appearance and feeling without contour deformities. All patients gained sexual ability 3 months after the operation. One had a delayed wound healing due to tight dressing, which was repaired with a scrotal skin flap. Penile enlargement by implantation of multiple layers of acellular dermal matrix was a safe and effective operation. This method can be performed in an outpatient ambulatory setting. The advantages of the acellular dermal matrix over the autogenous dermal fat grafts are elimination of donor site injury and scar and significant shortening of operation time.

  1. Critical scattering

    International Nuclear Information System (INIS)

    Stirling, W.G.; Perry, S.C.

    1996-01-01

    We outline the theoretical and experimental background to neutron scattering studies of critical phenomena at magnetic and structural phase transitions. The displacive phase transition of SrTiO 3 is discussed, along with examples from recent work on magnetic materials from the rare-earth (Ho, Dy) and actinide (NpAs, NpSb, USb) classes. The impact of synchrotron X-ray scattering is discussed in conclusion. (author) 13 figs., 18 refs

  2. Augmented reality in neurosurgery: a systematic review.

    Science.gov (United States)

    Meola, Antonio; Cutolo, Fabrizio; Carbone, Marina; Cagnazzo, Federico; Ferrari, Mauro; Ferrari, Vincenzo

    2017-10-01

    Neuronavigation has become an essential neurosurgical tool in pursuing minimal invasiveness and maximal safety, even though it has several technical limitations. Augmented reality (AR) neuronavigation is a significant advance, providing a real-time updated 3D virtual model of anatomical details, overlaid on the real surgical field. Currently, only a few AR systems have been tested in a clinical setting. The aim is to review such devices. We performed a PubMed search of reports restricted to human studies of in vivo applications of AR in any neurosurgical procedure using the search terms "Augmented reality" and "Neurosurgery." Eligibility assessment was performed independently by two reviewers in an unblinded standardized manner. The systems were qualitatively evaluated on the basis of the following: neurosurgical subspecialty of application, pathology of treated lesions and lesion locations, real data source, virtual data source, tracking modality, registration technique, visualization processing, display type, and perception location. Eighteen studies were included during the period 1996 to September 30, 2015. The AR systems were grouped by the real data source: microscope (8), hand- or head-held cameras (4), direct patient view (2), endoscope (1), and X-ray fluoroscopy (1) head-mounted display (1). A total of 195 lesions were treated: 75 (38.46 %) were neoplastic, 77 (39.48 %) neurovascular, and 1 (0.51 %) hydrocephalus, and 42 (21.53 %) were undetermined. Current literature confirms that AR is a reliable and versatile tool when performing minimally invasive approaches in a wide range of neurosurgical diseases, although prospective randomized studies are not yet available and technical improvements are needed.

  3. Augmented reality in a tumor resection model.

    Science.gov (United States)

    Chauvet, Pauline; Collins, Toby; Debize, Clement; Novais-Gameiro, Lorraine; Pereira, Bruno; Bartoli, Adrien; Canis, Michel; Bourdel, Nicolas

    2018-03-01

    Augmented Reality (AR) guidance is a technology that allows a surgeon to see sub-surface structures, by overlaying pre-operative imaging data on a live laparoscopic video. Our objectives were to evaluate a state-of-the-art AR guidance system in a tumor surgical resection model, comparing the accuracy of the resection with and without the system. Our system has three phases. Phase 1: using the MRI images, the kidney's and pseudotumor's surfaces are segmented to construct a 3D model. Phase 2: the intra-operative 3D model of the kidney is computed. Phase 3: the pre-operative and intra-operative models are registered, and the laparoscopic view is augmented with the pre-operative data. We performed a prospective experimental study on ex vivo porcine kidneys. Alginate was injected into the parenchyma to create pseudotumors measuring 4-10 mm. The kidneys were then analyzed by MRI. Next, the kidneys were placed into pelvictrainers, and the pseudotumors were laparoscopically resected. The AR guidance system allows the surgeon to see tumors and margins using classical laparoscopic instruments, and a classical screen. The resection margins were measured microscopically to evaluate the accuracy of resection. Ninety tumors were segmented: 28 were used to optimize the AR software, and 62 were used to randomly compare surgical resection: 29 tumors were resected using AR and 33 without AR. The analysis of our pathological results showed 4 failures (tumor with positive margins) (13.8%) in the AR group, and 10 (30.3%) in the Non-AR group. There was no complete miss in the AR group, while there were 4 complete misses in the non-AR group. In total, 14 (42.4%) tumors were completely missed or had a positive margin in the non-AR group. Our AR system enhances the accuracy of surgical resection, particularly for small tumors. Crucial information such as resection margins and vascularization could also be displayed.

  4. Googles Augmented-Reality-Game "Ingress"

    Directory of Open Access Journals (Sweden)

    Karl H. Stingeder

    2013-12-01

    Full Text Available Das an das "Geocoaching"-Spielprinzip erinnernde Augmented-­Reality-Game "Ingress" ist auf allen mit Android-Betriebssystem ausgestatteten Smartphones spielbar. Das Alleinstellungsmerkmal des Spiels ist gleich­zeitig auch das beste Patent-Rezept für bzw. gegen notorisches "Couch-Potato-ing": Das Game-Design des "Draußenspiels" erfordert jedoch stets die physische Anwesenheit der SpielerInnen am realen Ort des Geschehens, meist touristisch attraktive Sehenswürdigkeiten und architektonisch markante Plätze. Sobald "Ingress" per App am Smart­phone gestartet wird, stehen Interaktionen und Machtverhältnisse auf dem Handy-Display im Dreh- und Angelpunkt des Geschehens. Die Spielgrafik ist auf das Wesentliche reduziert und erinnert an die Optik von Videospielen der 80er Jahre. "Ingress" im Allgemeinen sowie "Magnus13", die erste von Google organisierte Fan-Veranstaltung Österreichs mit mehreren Hundert TeilnehmerInnen und ist mit einer "digitalen Schnitzeljagd" vergleichbar: Gemeinsam ist der klassischen "Schnitzeljagd" und dem digitalen "Schere-Schein-Papier" Prinzip von "Ingress" die tragende Rolle des im Spiel entstehenden Gemeinschaftsgefühls, welche in einer hohen Langzeitmotivation mündet. Trotz aller Euphorie, ob des unkonventionellen Augmented-Reality-Spielkonzepts und des in Folge der sozialen Dynamik außergewöhnlichen Sucht­potentials, ist angesichts von Edward Snowden und vielfältiger NSA-Abhörmaßnahmen, eine gesunde Portion Skepsis angebracht: Welchen Zweck erfüllt "Ingress"? Gibt es ein verhülltes "Mittel zum Zweck"? Welche Gefahren bestehen mit einer systematischen Auswertung des umfangreichen, ortsrelevanten Daten-Sammelsuriums? "Ingress" verdeutlicht trotz aller Risiken den soziokulturellen Bedeutungswandel des digitalen Spiels: Spiele per se und das Spiel als soziale Interaktion sind aktuell dabei, alle Bereiche unseres Lebens zu erfassen.

  5. Caffeine Sodium Benzoate for Electroconvulsive Therapy Augmentation.

    Science.gov (United States)

    Bozymski, Kevin M; Potter, Teresa G; Venkatachalam, Vasu; Pandurangi, Ananda K; Crouse, Ericka L

    2018-05-15

    Because of an ongoing manufacturer shortage of injectable caffeine sodium benzoate (CSB), patients at our health system were given CSB compounded in-house to increase seizure response during electroconvulsive therapy (ECT). Therefore, we aimed to evaluate its effectiveness and safety as an ECT augmentation agent. Medical records of patients who received compounded CSB at Virginia Commonwealth University Health System were reviewed to identify adults receiving it as part of an index ECT treatment course between June 2012 and December 2016. The primary outcome was change in electroencephalogram seizure duration from pre-caffeine session to initial caffeine session. Data were also collected on demographics, motor seizure duration, maximum heart rate, mean arterial pressure, and concurrent medication use for these sessions and the last caffeine session. Seven-one patients were included in the study, predominantly white females with a mean age of 58.6 years. The most common indication for ECT was major depressive disorder resistant to pharmacotherapy (71.8%), followed by catatonia associated with another mental disorder (19.7%). Electroencephalogram seizure duration increased by 24.1 seconds on average with first CSB use (P < 0.0001), allowing 24 more patients overall to achieve goal of at least 30 seconds (P < 0.0001). No clinically significant changes in maximum heart rate or mean arterial pressure were observed, nor did any patients require an abortive agent for prolonged seizure. Five patients (7%) discontinued CSB prematurely: 4 related to adverse effects and 1 secondary to ineffectiveness. We confirm results of prior studies of the utility of CSB and add that compounded CSB is effective for ECT augmentation, maintaining effectiveness throughout the index course with minimal safety concerns.

  6. Performance of a solar augmented heat pump

    Science.gov (United States)

    Bedinger, A. F. G.; Tomlinson, J. J.; Reid, R. L.; Chaffin, D. J.

    Performance of a residential size solar augmented heat pump is reported for the 1979-1980 heating season. The facility located in Knoxville, Tennessee, has a measured heat load coefficient of 339.5 watt/C (644 BTU/hr- F). The solar augmented heat pump system consists of 7.4 cu m of one inch diameter crushed limestone. The heat pump is a nominal 8.8 KW (2 1/2 ton) high efficiency unit. The system includes electric resistance heaters to give the option of adding thermal energy to the pebble bed storage during utility off-peak periods, thus offering considerable load management capability. A 15 KW electric resistance duct heater is used to add thermal energy to the pebble bin as required during off-peak periods. Hourly thermal performance and on site weather data was taken for the period November 1, 1979, to April 13, 1980. Thermal performance data consists of heat flow summations for all modes of the system, pebble bed temperatures, and space temperature. Weather data consists of dry bulb temperature, dew point temperature, total global insolation (in the plane of the collector), and wind speed and direction. An error analysis was performed and the least accurate of the measurements was determined to be the heat flow at 5%. Solar system thermal performance factor was measured to be 8.77. The heat pump thermal performance factor was 1.64. Total system seasonal performance factor was measured to be 1.66. Using a modified version of TRNSYS, the thermal performance of this system was simulated. When simulation results were compared with data collected onsite, the predicted heat flow and power consumption generally were within experimental accuracy.

  7. A brief review of augmented reality science learning

    Science.gov (United States)

    Gopalan, Valarmathie; Bakar, Juliana Aida Abu; Zulkifli, Abdul Nasir

    2017-10-01

    This paper reviews several literatures concerning the theories and model that could be applied for science motivation for upper secondary school learners (16-17 years old) in order to make the learning experience more amazing and useful. The embedment of AR in science could bring an awe-inspiring transformation on learners' viewpoint towards the respective subject matters. Augmented Reality is able to present the real and virtual learning experience with the addition of multiple media without replacing the real environment. Due to the unique feature of AR, it attracts the mass attention of researchers to implement AR in science learning. This impressive technology offers learners with the ultimate visualization and provides an astonishing and transparent learning experience by bringing to light the unseen perspective of the learning content. This paper will attract the attention of researchers in the related field as well as academicians in the related discipline. This paper aims to propose several related theoretical guidance that could be applied in science motivation to transform the learning in an effective way.

  8. Synthesis of the unmanned aerial vehicle remote control augmentation system

    International Nuclear Information System (INIS)

    Tomczyk, Andrzej

    2014-01-01

    Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are not suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system

  9. Synthesis of the unmanned aerial vehicle remote control augmentation system

    Energy Technology Data Exchange (ETDEWEB)

    Tomczyk, Andrzej, E-mail: A.Tomczyk@prz.edu.pl [Department of Avionics and Control Systems, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstañców Warszawy 12, 35-959 Rzeszów (Poland)

    2014-12-10

    Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are not suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.

  10. Augmented Plasma Adiponectin after Prolonged Fasting During Ramadan in Men

    Directory of Open Access Journals (Sweden)

    Sadegh Feizollahzadeh

    2014-07-01

    Full Text Available Background: Intermittent fasting during Ramadan entails major changes in metabolism and energy expenditure. This study sought to determine effect of the Ramadan fasting on serum levels of adiponectin and tumor necrosis factor-α (TNF-α as two inter-related peptides involved in cells sensitivity to insulin and glucose metabolism. Methods: Total of seventy healthy men, with age range equal or greater than 30, with at least three type2 diabetes mellitus (DM risk factors were selected. Serum lipid profile, anthropometric indices and plasma glucose levels were determined using conventional methods. Also, serum adiponectin and TNF- α concentrations were assessed using Enzyme-linked Immunosorbent Assay. Data were analyzed by paired t-test. Results: Ramadan fasting resulted in a significant increase of serum adiponectin (P< 0.000, fasting glucose (P< 0.000 and triglycride (P< 0.001. Body mass index was lowered during the fasting (P< 0.000. Finally, no remarkable decrease was found in serum TNF-α levels (P= 0.100. Conclusion: Ramadan fasting resulted in augmented adiponectin levels which may help in improving metabolic stress induced by insulin resistance in men with predisposing factors of type2 DM.

  11. Augmenting a Child's Reality: Using Educational Tablet Technology

    Science.gov (United States)

    Tanner, Patricia; Karas, Carly; Schofield, Damian

    2014-01-01

    This study investigates the classroom integration of an innovative technology, augmented reality. Although the process of adding new technologies into a classroom setting can be daunting, the concept of augmented reality has demonstrated the ability to educate students and to assist with their comprehension of a procedural task. One half of the…

  12. Potential Use of Augmented Reality in LIS Education

    Science.gov (United States)

    Wójcik, Magdalena

    2016-01-01

    The subject of this article is the use of augmented reality technology in library and information science education. The aim is to determine the scope and potential uses of augmented reality in the education of information professionals. In order to determine the scope and forms of potential use of AR technology in LIS education a two-step…

  13. Augmented Reality Learning Experiences: Survey of Prototype Design and Evaluation

    Science.gov (United States)

    Santos, Marc Ericson C.; Chen, Angie; Taketomi, Takafumi; Yamamoto, Goshiro; Miyazaki, Jun; Kato, Hirokazu

    2014-01-01

    Augmented reality (AR) technology is mature for creating learning experiences for K-12 (pre-school, grade school, and high school) educational settings. We reviewed the applications intended to complement traditional curriculum materials for K-12. We found 87 research articles on augmented reality learning experiences (ARLEs) in the IEEE Xplore…

  14. The Local Games Lab ABQ: Homegrown Augmented Reality

    Science.gov (United States)

    Holden, Christopher

    2014-01-01

    Experiments in the use of augmented reality games formerly required extensive material resources and expertise to implement above and beyond what might be possible within the usual educational contexts. Currently, the more common availability of hardware in these contexts and the existence of easy-to-use, general purpose augmented reality design…

  15. Routine sensor-augmented pump therapy in type 1 diabetes

    DEFF Research Database (Denmark)

    Nørgaard, Kirsten; Scaramuzza, Andrea; Bratina, Natasa

    2013-01-01

    Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia.......Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia....

  16. Augmented Reality, the Future of Contextual Mobile Learning

    Science.gov (United States)

    Sungkur, Roopesh Kevin; Panchoo, Akshay; Bhoyroo, Nitisha Kirtee

    2016-01-01

    Purpose: This study aims to show the relevance of augmented reality (AR) in mobile learning for the 21st century. With AR, any real-world environment can be augmented by providing users with accurate digital overlays. AR is a promising technology that has the potential to encourage learners to explore learning materials from a totally new…

  17. Sensor-augmented pump therapy at 36 months

    DEFF Research Database (Denmark)

    Schmidt, Signe; Nørgaard, Kirsten

    2012-01-01

    This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start.......This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start....

  18. AUGMENTED REALITY - STATE OF KNOWLEDGE, USE AND EXPERIMENTATION

    Directory of Open Access Journals (Sweden)

    Mihaela Filofteia TUTUNEA

    2013-12-01

    Full Text Available Technologies for augmenting reality have been consolidated during the last decades, extending their applicability to more and more socio-economic areas. The rapid evolution of mobile technologies and virtualization of the digital environment have created auspicious conditions for massive extension and implementation of solutions for augmenting reality at global level. Experience has already shown that augmented reality, alongside virtual reality can offer very important support solutions in modeling the real world with the aim of extending the human capabilities of perception, allowing the opening of a new phase in the world’s socio-economic development. Starting from the evident tendencies that have manifested at global level in the development and implementation of augmented reality technologies, the paper begins with the presentation of the most important aspects related to augmented reality technologies, highlighting their main areas of application, and presents the study realized for identifying the level of knowledge, use and effective experimentation of augmented reality applications by mobile device users. The results of this study could be very useful to the socio-economic environment, starting with the field of research, continuing with developers and providers of augmented reality solutions, manufacturers and providers of hardware infrastructure support for augmented reality solutions and systems, final users of these solutions, both individuals and businesses, and experimenting digital communities.

  19. Pose estimation for mobile devices and augmented reality

    NARCIS (Netherlands)

    Caarls, J.

    2009-01-01

    In this thesis we introduce the reader to the field of Augmented Reality (AR) and describe aspects of an AR system. We show the current uses in treatment of phobias, games, sports and industry. We present the challenges for Optical See-Through Augmented Reality in which the real world is perceived

  20. Augmentative biological control of arthropods in Latin America

    NARCIS (Netherlands)

    Lenteren, van J.C.; Bueno, V.H.P.

    2003-01-01

    Augmentative forms of biological control, where natural enemies are periodically introduced, are applied over large areas in various cropping systems in Latin America. About 25% of the world area under augmentative control is situated in this region. Well-known examples are the use of species of the

  1. International workshop on multimodal virtual and augmented reality (workshop summary)

    NARCIS (Netherlands)

    Hürst, W.O.; Iwai, Daisuke; Balakrishnan, Prabhakaran

    2016-01-01

    Virtual reality (VR) and augmented reality (AR) are expected by many to become the next wave of computing with significant impacts on our daily lives. Motivated by this, we organized a workshop on “Multimodal Virtual and Augmented Reality (MVAR)” at the 18th ACM International Conference on

  2. Operational Data Augmentation in Classifying Single Aerial Images of Animals

    NARCIS (Netherlands)

    Okafor, Emmanuel; Smit, Rik; Schomaker, Lambertus; Wiering, Marco

    2017-01-01

    In deep learning, data augmentation is important to increase the amount of training images to obtain higher classification accuracies. Most data-augmentation methods adopt the use of the following techniques: cropping, mirroring, color casting, scaling and rotation for creating additional training

  3. A Systematic Review of Pliance, Tracking, and Augmenting

    NARCIS (Netherlands)

    Kissi, Ama; Hughes, Sean; Mertens, Gaëtan; Barnes-Holmes, Dermot; De Houwer, Jan; Crombez, Geert

    Within relational frame theory, a distinction has been made between three types of rule-governed behavior known as pliance, tracking, and augmenting. This review examined whether there is support for the concepts of pliance, tracking, and augmenting in the experimental analysis of behavior; whether

  4. Complications 15 years after breast augmentation with polyacrylamide

    Directory of Open Access Journals (Sweden)

    Habib M. Ghasemi

    2015-06-01

    Full Text Available Polyacrylamide hydrogel (PAAG has been used as an injectable, permanent filler for soft-tissue augmentation for more than two decades. Several complications have been reported worldwide. In this case report, we present a woman with long-term complications 15 years after bilateral breast augmentation with PAAG injections.

  5. Augmentation of Cognition and Perception Through Advanced Synthetic Vision Technology

    Science.gov (United States)

    Prinzel, Lawrence J., III; Kramer, Lynda J.; Bailey, Randall E.; Arthur, Jarvis J.; Williams, Steve P.; McNabb, Jennifer

    2005-01-01

    Synthetic Vision System technology augments reality and creates a virtual visual meteorological condition that extends a pilot's cognitive and perceptual capabilities during flight operations when outside visibility is restricted. The paper describes the NASA Synthetic Vision System for commercial aviation with an emphasis on how the technology achieves Augmented Cognition objectives.

  6. Buspirone is an effective augmenting agent of serotonin selective re ...

    African Journals Online (AJOL)

    Results. Patients had previously failed mUltiple trials of antidepressants, often including lithium and/or thyroid augmentation, as well as, in 12 cases, electroconvulsive therapy. However, augmentation of an SSRI With buspirone led to a rapid and significant improvement in depression in. 6 of 14 (43%) patients. Conclusion.

  7. Applying Augmented Reality in practical classes for engineering students

    Science.gov (United States)

    Bazarov, S. E.; Kholodilin, I. Yu; Nesterov, A. S.; Sokhina, A. V.

    2017-10-01

    In this article the Augmented Reality application for teaching engineering students of electrical and technological specialties is introduced. In order to increase the motivation for learning and the independence of students, new practical guidelines on Augmented Reality were developed in the application to practical classes. During the application development, the authors used software such as Unity 3D and Vuforia. The Augmented Reality content consists of 3D-models, images and animations, which are superimposed on real objects, helping students to study specific tasks. A user who has a smartphone, a tablet PC, or Augmented Reality glasses can visualize on-screen virtual objects added to a real environment. Having analyzed the current situation in higher education: the learner’s interest in studying, their satisfaction with the educational process, and the impact of the Augmented Reality application on students, a questionnaire was developed and offered to students; the study involved 24 learners.

  8. Augmented Reality as a Countermeasure for Sleep Deprivation.

    Science.gov (United States)

    Baumeister, James; Dorrlan, Jillian; Banks, Siobhan; Chatburn, Alex; Smith, Ross T; Carskadon, Mary A; Lushington, Kurt; Thomas, Bruce H

    2016-04-01

    Sleep deprivation is known to have serious deleterious effects on executive functioning and job performance. Augmented reality has an ability to place pertinent information at the fore, guiding visual focus and reducing instructional complexity. This paper presents a study to explore how spatial augmented reality instructions impact procedural task performance on sleep deprived users. The user study was conducted to examine performance on a procedural task at six time points over the course of a night of total sleep deprivation. Tasks were provided either by spatial augmented reality-based projections or on an adjacent monitor. The results indicate that participant errors significantly increased with the monitor condition when sleep deprived. The augmented reality condition exhibited a positive influence with participant errors and completion time having no significant increase when sleep deprived. The results of our study show that spatial augmented reality is an effective sleep deprivation countermeasure under laboratory conditions.

  9. Augmented Reality in Tourism - Research and Applications Overview

    Directory of Open Access Journals (Sweden)

    Anabel L. Kečkeš

    2017-06-01

    Full Text Available Augmented reality is a complex interdisciplinary field utilizing information technologies in diverse areas such as medicine, education, architecture, industry, tourism and others, augmenting the real-time, real-world view with additional superimposed information in chosen format(s. The aim of this paper is to present an overview of both research and application aspects of using augmented reality technologies in tourism domain. While most research, and especially applications, are dealing with and developing visual-based augmented reality systems, there is a relevant amount of research discussing the utilization of other human senses such as tactioception and audioception, both being discussed within this work. A comprehensive literature analysis within this paper resulted with the identification, compilation and categorization of the key factors having the most relevant impact on the success of utilization of augmented technology in tourism domain.

  10. Augmented Reality-Guided Lumbar Facet Joint Injections.

    Science.gov (United States)

    Agten, Christoph A; Dennler, Cyrill; Rosskopf, Andrea B; Jaberg, Laurenz; Pfirrmann, Christian W A; Farshad, Mazda

    2018-05-08

    The aim of this study was to assess feasibility and accuracy of augmented reality-guided lumbar facet joint injections. A spine phantom completely embedded in hardened opaque agar with 3 ring markers was built. A 3-dimensional model of the phantom was uploaded to an augmented reality headset (Microsoft HoloLens). Two radiologists independently performed 20 augmented reality-guided and 20 computed tomography (CT)-guided facet joint injections each: for each augmented reality-guided injection, the hologram was manually aligned with the phantom container using the ring markers. The radiologists targeted the virtual facet joint and tried to place the needle tip in the holographic joint space. Computed tomography was performed after each needle placement to document final needle tip position. Time needed from grabbing the needle to final needle placement was measured for each simulated injection. An independent radiologist rated images of all needle placements in a randomized order blinded to modality (augmented reality vs CT) and performer as perfect, acceptable, incorrect, or unsafe. Accuracy and time to place needles were compared between augmented reality-guided and CT-guided facet joint injections. In total, 39/40 (97.5%) of augmented reality-guided needle placements were either perfect or acceptable compared with 40/40 (100%) CT-guided needle placements (P = 0.5). One augmented reality-guided injection missed the facet joint space by 2 mm. No unsafe needle placements occurred. Time to final needle placement was substantially faster with augmented reality guidance (mean 14 ± 6 seconds vs 39 ± 15 seconds, P Augmented reality-guided facet joint injections are feasible and accurate without potentially harmful needle placement in an experimental setting.

  11. Augmented Lagrangian for shallow viscoplastic flow with topography

    Science.gov (United States)

    Ionescu, Ioan R.

    2013-06-01

    In this paper we have developed a robust numerical algorithm for the visco-plastic Saint-Venant model with topography. For the time discretization an implicit (backward) Euler scheme was used. To solve the resulting nonlinear equations, a four steps iterative algorithm was proposed. To handle the non-differentiability of the plastic terms an iterative decomposition-coordination formulation coupled with the augmented Lagrangian method was adopted. The proposed algorithm is consistent, i.e. if the convergence is achieved then the iterative solution satisfies the nonlinear system at each time iteration. The equations for the velocity field are discretized using the finite element method, while a discontinuous Galerkin method, with an upwind choice of the flux, is adopted for solving the hyperbolic equations that describe the evolution of the thickness. The algorithm permits to solve alternatively, at each iteration, the equations for the velocity field and for the thickness. The iterative decomposition coordination formulation coupled with the augmented Lagrangian method works very well and no instabilities are present. The proposed algorithm has a very good convergence rate, with the exception of large Reynolds numbers (Re≫1000), not involved in the applications concerned by the shallow viscoplastic model. The discontinuous Galerkin technique assure the mass conservation of the shallow system. The model has the exact C-property for a plane bottom and an asymptotic C-property for a general topography. Some boundary value problems were selected to analyze the robustness of the numerical algorithm and the predictive capabilities of the mechanical model. The comparison with an exact rigid flow solution illustrates the accuracy of the numerical scheme in handling the non-differentiability of the plastic terms. The influence of the mesh and of the time step are investigated for the flow of a Bingham fluid in a talweg. The role of the material cohesion in stopping a

  12. AUGMENTED REALITY APPLICATIONS IN HAND-HELD DEVICES IN THE LIGHT OF BAUDRILLARD’S “SIMULACRA AND SIMULATION”

    Directory of Open Access Journals (Sweden)

    Erandaru Erandaru

    2008-01-01

    Full Text Available Baudrillard merupakan salah satu tokoh dalam filsafat postmodern yang mengkritik kehadiran media dunia maya dalam budaya hidup manusia saat ini. Baudrillard melontarkan pendapat bahwa interaksi manusia dengan media tersebut tidak membawa manfaat. Lebih jauh lagi dia mengkhawatirkan bahwa masyarakat dapat menjadi obyek bagi media. kemampuan media tersebut untuk membentuk dunia impian yang dapat menarik masyarakat untuk semakin menjauh dari kehidupan nyata. Perkembangan terakhir dalam teknologi virtual telah memungkinkan kehadirannya secara luas di pasar dan dalam jangkaun daya beli konsumen melalui aplikasi augmented reality. Aplikasi dengan konsep untuk memungkinkan pengguna melihat dunia maya terintegrasi ke dalam dunia nyata. Suatu pendekatan yang berbeda dibandingkan dengan aplikasi yang menggunakan teknologi virtual reality pada umumnya yang berusaha untuk menghadirkan pengguna ke dalam dunia maya. Bukannya semakin menarik pengguna menjauh dari dunia nyata, aplikasi augmented reality justru semakin menarik pengguna untuk berinteraksi dengan dunia nyata. Walaupun masih terlalu dini untuk mengetahui seberapa jauh dampak teknologi augmented reality bagi masyarakat, pemahaman terhadap kritik yang dilontarkan oleh Baudrillard setidaknya mampu memberikan wawasan bagi pelaku desain media dalam memanfaatkan teknologi augmented reality dan menerapkannya sedemikian hingga membantu dalam meningkatkan wawasan dan kepedulian masyarakat terhadap dunia nyata. Abstract in Bahasa Indonesia: Baudrillard is one of postmodernist theorists that criticize the unreality of the culture which we live in. He suggests that human interactions with virtual reality media and unreal technologies, achieve nothing; He even fears that society will fall prey to these media subjectivity. The virtual reality media capability to produce simulated reality could mislead society into voluntary detachment with the real world. The latest development in virtual technology has made it

  13. Conscious Augmentation of Creative State Enhances "Real" Creativity in Open-Ended Analogical Reasoning.

    Science.gov (United States)

    Weinberger, Adam B; Iyer, Hari; Green, Adam E

    2016-01-01

    Humans have an impressive ability to augment their creative state (i.e., to consciously try and succeed at thinking more creatively). Though this "thinking cap" phenomenon is commonly experienced, the range of its potential has not been fully explored by creativity research, which has often focused instead on creativity as a trait. A key question concerns the extent to which conscious augmentation of state creativity can improve creative reasoning. Although artistic creativity is also of great interest, it is creative reasoning that frequently leads to innovative advances in science and industry. Here, we studied state creativity in analogical reasoning, a form of relational reasoning that spans the conceptual divide between intelligence and creativity and is a core mechanism for creative innovation. Participants performed a novel Analogy Finding Task paradigm in which they sought valid analogical connections in a matrix of word-pairs. An explicit creativity cue elicited formation of substantially more creative analogical connections (measured via latent semantic analysis). Critically, the increase in creative analogy formation was not due to a generally more liberal criterion for analogy formation (that is, it appeared to reflect "real" creativity rather than divergence at the expense of appropriateness). The use of an online sample provided evidence that state creativity augmentation can be successfully elicited by remote cuing in an online environment. Analysis of an intelligence measure provided preliminary indication that the influential "threshold hypothesis," which has been proposed to characterize the relationship between intelligence and trait creativity, may be extensible to the new domain of state creativity.

  14. PleurAlert: an augmented chest drainage system with electronic sensing, automated alerts and internet connectivity.

    Science.gov (United States)

    Leeson, Cory E; Weaver, Robert A; Bissell, Taylor; Hoyer, Rachel; McClain, Corinne; Nelson, Douglas A; Samosky, Joseph T

    2012-01-01

    We have enhanced a common medical device, the chest tube drainage container, with electronic sensing of fluid volume, automated detection of critical alarm conditions and the ability to automatically send alert text messages to a nurse's cell phone. The PleurAlert system provides a simple touch-screen interface and can graphically display chest tube output over time. Our design augments a device whose basic function dates back 50 years by adding technology to automate and optimize a monitoring process that can be time consuming and inconvenient for nurses. The system may also enhance detection of emergency conditions and speed response time.

  15. Augmented reality usage for prototyping speed up

    Directory of Open Access Journals (Sweden)

    Jiří Šťastný

    2011-01-01

    Full Text Available The integral part of production process in many companies is prototyping. Although, these companies commonly have high quality visualization tools (large screen projections, virtual reality, prototyping was never abandoned. There is a number of reasons. The most important is the possibility of model observation from any angle without any physical constraints and its haptic feedback. The interactivity of model adjustments is important as well. The direct work with the model allows the designers to focus on the creative process more than work with a computer. There is still a problem with a difficult adjustability of the model. More significant changes demand completely new prototype or at least longer time for its realization.The first part of the article describes our approach for solution of this problem by means of Augmented Reality. The merging of the real world model and digital objects allows streamline the work with the model and speed up the whole production phase significantly. The main advantage of augmented reality is the possibility of direct manipulation with the scene using a portable digital camera. Also adding digital objects into the scene could be done using identification markers placed on the surface of the model. Therefore it is not necessary to work with special input devices and lose the contact with the real world model. Adjustments are done directly on the model. The key problem of outlined solution is the ability of identification of an object within the camera picture and its replacement with the digital object. The second part of the article is focused especially on the identification of exact position and orientation of the marker within the picture. The identification marker is generalized into the triple of points which represents a general plane in space. There is discussed the space identification of these points and the description of representation of their position and orientation be means of transformation

  16. Pullout strength of cement-augmented and wide-suture transosseous fixation in the greater tuberosity.

    Science.gov (United States)

    Shi, Brendan Y; Diaz, Miguel; Belkoff, Stephen M; Srikumaran, Uma

    2017-12-01

    Obtaining strong fixation in low-density bone is increasingly critical in surgical repair of rotator cuff tears because of the aging population. To evaluate two new methods of improving pullout strength of transosseous rotator cuff repair in low-density bone, we analyzed the effects of 1) using 2-mm suture tape instead of no. 2 suture and 2) augmenting the lateral tunnel with cement. Eleven pairs of osteopenic or osteoporotic cadaveric humeri were identified by dual-energy x-ray absorptiometry. One bone tunnel and one suture were placed in the heads of 22 specimens. Five randomly selected pairs were repaired with no. 2 suture; the other six pairs were repaired with 2-mm suture tape. One side of each pair received lateral tunnel cement augmentation. Specimens were tested to suture pullout. Data were fitted to multivariate models that accounted for bone mineral density and other specimen characteristics. Two specimens were excluded because of knot-slipping during testing. Use of suture tape versus no. 2 suture conferred a 75-N increase (95% CI: 37, 113) in pullout strength (PCement augmentation conferred a 42-N improvement (95% CI: 10, 75; P=0.011). Other significant predictors of pullout strength were age, sex, and bone mineral density. We show two methods of improving the fixation strength of transosseous rotator cuff repairs in low-density bone: using 2-mm suture tape instead of no. 2 suture and augmenting the lateral tunnel with cement. These methods may improve the feasibility of transosseous repairs in an aging patient population. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Using an Augmented Lagrangian Method and block fracturing in the DDA method

    International Nuclear Information System (INIS)

    Lin, C.T.; Amadei, B.; Sture, S.

    1994-01-01

    This paper presents two extensions to the Discontinuous Deformation Analysis (DDA) method orginally proposed by Shi for modeling the response of blocky rock masses to mechanical loading. The first extension consists of improving the block contact algorithm. An Augmented Lagrangian Method is used to replace the Penalty Method orginally proposed. It allows Lagrange multipliers to be introduced without increasing the number of equations that need to be solved and thus, block contract forces can be calculated more accurately. A block fracturing capability based on a three-parameter Mohr-Coulomb criterion represents the second extension. It allows for shear or tensile fracturing of intact blocks and the formation of smaller blocks

  18. Recent Development of Augmented Reality in Surgery: A Review

    Science.gov (United States)

    Vávra, P.; Zonča, P.; Ihnát, P.; El-Gendi, A.

    2017-01-01

    Introduction The development augmented reality devices allow physicians to incorporate data visualization into diagnostic and treatment procedures to improve work efficiency, safety, and cost and to enhance surgical training. However, the awareness of possibilities of augmented reality is generally low. This review evaluates whether augmented reality can presently improve the results of surgical procedures. Methods We performed a review of available literature dating from 2010 to November 2016 by searching PubMed and Scopus using the terms “augmented reality” and “surgery.” Results. The initial search yielded 808 studies. After removing duplicates and including only journal articles, a total of 417 studies were identified. By reading of abstracts, 91 relevant studies were chosen to be included. 11 references were gathered by cross-referencing. A total of 102 studies were included in this review. Conclusions The present literature suggest an increasing interest of surgeons regarding employing augmented reality into surgery leading to improved safety and efficacy of surgical procedures. Many studies showed that the performance of newly devised augmented reality systems is comparable to traditional techniques. However, several problems need to be addressed before augmented reality is implemented into the routine practice. PMID:29065604

  19. Recent Development of Augmented Reality in Surgery: A Review

    Directory of Open Access Journals (Sweden)

    P. Vávra

    2017-01-01

    Full Text Available Introduction. The development augmented reality devices allow physicians to incorporate data visualization into diagnostic and treatment procedures to improve work efficiency, safety, and cost and to enhance surgical training. However, the awareness of possibilities of augmented reality is generally low. This review evaluates whether augmented reality can presently improve the results of surgical procedures. Methods. We performed a review of available literature dating from 2010 to November 2016 by searching PubMed and Scopus using the terms “augmented reality” and “surgery.” Results. The initial search yielded 808 studies. After removing duplicates and including only journal articles, a total of 417 studies were identified. By reading of abstracts, 91 relevant studies were chosen to be included. 11 references were gathered by cross-referencing. A total of 102 studies were included in this review. Conclusions. The present literature suggest an increasing interest of surgeons regarding employing augmented reality into surgery leading to improved safety and efficacy of surgical procedures. Many studies showed that the performance of newly devised augmented reality systems is comparable to traditional techniques. However, several problems need to be addressed before augmented reality is implemented into the routine practice.

  20. Hybrid-augmented intelligence:collaboration and cognition

    Institute of Scientific and Technical Information of China (English)

    Nan-ning ZHENG; Zi-yi LIU; Peng-ju REN; Yong-qiang MA; Shi-tao CHEN; Si-yu YU; Jian-ru XUE

    2017-01-01

    The long-term goal of artificial intelligence (AI) is to make machines learn and think like human beings. Due to the high levels of uncertainty and vulnerability in human life and the open-ended nature of problems that humans are facing, no matter how intelligent machines are, they are unable to completely replace humans. Therefore, it is necessary to introduce human cognitive capabilities or human-like cognitive models into AI systems to develop a new form of AI, that is, hybrid-augmented intelligence. This form of AI or machine intelligence is a feasible and important developing model. Hybrid-augmented intelligence can be divided into two basic models:one is human-in-the-loop augmented intelligence with human-computer collaboration, and the other is cognitive computing based augmented intelligence, in which a cognitive model is embedded in the machine learning system. This survey describes a basic framework for human-computer collaborative hybrid-augmented intelligence, and the basic elements of hybrid-augmented intelligence based on cognitive computing. These elements include intuitive reasoning, causal models, evolution of memory and knowledge, especially the role and basic principles of intuitive reasoning for complex problem solving, and the cognitive learning framework for visual scene understanding based on memory and reasoning. Several typical applications of hybrid-augmented intelligence in related fields are given.