Light-Directed Particle Patterning by Evaporative Optical Marangoni Assembly.

Science.gov (United States)

Varanakkottu, Subramanyan Namboodiri; Anyfantakis, Manos; Morel, Mathieu; Rudiuk, Sergii; Baigl, Damien

2016-01-13

Controlled particle deposition on surfaces is crucial for both exploiting collective properties of particles and their integration into devices. Most available methods depend on intrinsic properties of either the substrate or the particles to be deposited making them difficult to apply to complex, naturally occurring or industrial formulations. Here we describe a new strategy to pattern particles from an evaporating drop, regardless of inherent particle characteristics and suspension composition. We use light to generate Marangoni surface stresses resulting in flow patterns that accumulate particles at predefined positions. Using projected images, we generate a broad variety of complex patterns, including multiple spots, lines and letters. Strikingly, this method, which we call evaporative optical Marangoni assembly (eOMA), allows us to pattern particles regardless of their size or surface properties, in model suspensions as well as in complex, real-world formulations such as commercial coffee.

Marangoni convection radiative flow of dusty nanoliquid with exponential space dependent heat source

Directory of Open Access Journals (Sweden)

Basavarajappa Mahanthesh

2017-12-01

Full Text Available The flow of liquids submerged with nanoparticles is of significance to industrial applications, specifically in nuclear reactors and the cooling of nuclear systems to improve energy efficiency. The application of nanofluids in water-cooled nuclear systems can result in a significant improvement of their economic performance and/or safety margins. Therefore, in this paper, Marangoni thermal convective boundary layer dusty nanoliquid flow across a flat surface in the presence of solar radiation is studied. A two phase dusty liquid model is considered. Unlike classical temperature-dependent heat source effects, an exponential space-dependent heat source aspect is considered. Stretching variables are utilized to transform the prevailing partial differential system into a nonlinear ordinary differential system, which is then solved numerically via the Runge-Kutta-Fehlberg approach coupled with a shooting technique. The roles of physical parameters are focused in momentum and heat transport distributions. Graphical illustrations are also used to consider local and average Nusselt numbers. We examined the results under both linear and quadratic variation of the surface temperature. Our simulations established that the impact of Marangoni flow is useful for an enhancement of the heat transfer rate.

Marangoni elasticity of flowing soap films

OpenAIRE

Kim, Ildoo; Mandre, Shreyas

2016-01-01

We measure the Marangoni elasticity of a flowing soap film to be 22 dyne/cm irrespective of its width, thickness, flow speed, or the bulk soap concentration. We perform this measurement by generating an oblique shock in the soap film and measuring the shock angle, flow speed and thickness. We postulate that the elasticity is constant because the film surface is crowded with soap molecules. Our method allows non-destructive measurement of flowing soap film elasticity, and the value 22 dyne/cm ...

Role of Marangoni stress during breakup of surfactant-covered liquid threads: Reduced rates of thinning and microthread cascades

Science.gov (United States)

Kamat, Pritish M.; Wagoner, Brayden W.; Thete, Sumeet S.; Basaran, Osman A.

2018-04-01

Adsorption onto and lowering of surface tension σ of fluid interfaces by surfactants is exploited in drop formation (e.g., inkjet printing) where a thinning liquid thread (radius h ) connects an about-to-form drop to the liquid that remains hanging from the nozzle when the former falls from it. Surfactants can affect thread pinch-off in two ways: first, by lowering σ , they lower capillary pressure (σ /h ), and second, as surfactant concentration along the interface can be nonuniform, they cause the interface to be subjected to a surface tension gradient or Marangoni stress. Recent studies show that the location where the thread breaks is devoid of surfactant, and others assert that the influence of Marangoni stress on pinch-off is negligible. We demonstrate by simulations and experiments that surfactants play a major role in drop formation and that Marangoni stresses acting near but not at the pinch point give rise to reduced rates of thread thinning and formation of multiple microthreads that distinguish pinch-off of surfactant-covered threads from surfactant-free ones. Thinning at finite Reynolds and Peclet numbers, Re and Pe, is shown to exhibit intermediate scaling regimes that have heretofore only been observed during pinch-off of threads undergoing creeping flow (Re=0 ) while convection of surfactant is weak compared to its diffusion (Pe<1 ).

Marangoni elasticity of flowing soap films

Science.gov (United States)

Kim, Ildoo; Mandre, Shreyas

2017-08-01

We measure the Marangoni elasticity of a flowing soap film to be 22 mN/m irrespective of its width, thickness, flow speed, or the bulk soap concentration. We perform this measurement by generating an oblique shock in the soap film and measuring the shock angle, flow speed, and thickness. We postulate that the elasticity is constant because the film surface is crowded with soap molecules. Our method allows nondestructive measurement of flowing soap film elasticity and the value 22 mN/m is likely applicable to other similarly constructed flowing soap films.

Marangoni Convection during Free Electron Laser Nitriding of Titanium

Science.gov (United States)

Höche, Daniel; Müller, Sven; Rapin, Gerd; Shinn, Michelle; Remdt, Elvira; Gubisch, Maik; Schaaf, Peter

2009-08-01

Pure titanium was treated by free electron laser (FEL) radiation in a nitrogen atmosphere. As a result, nitrogen diffusion occurs and a TiN coating was synthesized. Local gradients of interfacial tension due to the local heating lead to a Marangoni convection, which determines the track properties. Because of the experimental inaccessibility of time-dependent occurrences, finite element calculations were performed, to determine the physical processes such as heat transfer, melt flow, and mass transport. In order to calculate the surface deformation of the gas-liquid interface, the level set approach was used. The equations were modified and coupled with heat-transfer and diffusion equations. The process was characterized by dimensionless numbers such as the Reynolds, Peclet, and capillary numbers, to obtain more information about the acting forces and the coating development. Moreover, the nitrogen distribution was calculated using the corresponding transport equation. The simulations were compared with cross-sectional micrographs of the treated titanium sheets and checked for their validity. Finally, the process presented is discussed and compared with similar laser treatments.

Experiments on the breakup of drop-impact crowns by Marangoni holes

KAUST Repository

Aljedaani, Abdulrahman Barakat; Wang, Chunliang; Jetly, Aditya; Thoroddsen, Sigurdur T

2018-01-01

We investigate experimentally the breakup of the Edgerton crown due to Marangoni instability when a highly viscous drop impacts on a thin film of lower-viscosity liquid, which also has different surface tension than the drop liquid. The presence

Manipulation and control of instabilities for surfactant-laden liquid film flowing down an inclined plane using a deformable solid layer

Science.gov (United States)

Tomar, Dharmendra S.; Sharma, Gaurav

2018-01-01

We analyzed the linear stability of surfactant-laden liquid film with a free surface flowing down an inclined plane under the action of gravity when the inclined plane is coated with a deformable solid layer. For a flow past a rigid incline and in the presence of inertia, the gas-liquid (GL) interface is prone to the free surface instability and the presence of surfactant is known to stabilize the free surface mode when the Marangoni number increases above a critical value. The rigid surface configuration also admits a surfactant induced Marangoni mode which remains stable for film flows with a free surface. This Marangoni mode was observed to become unstable for a surfactant covered film flow past a flexible inclined plane in a creeping flow limit when the wall is made sufficiently deformable. In view of these observations, we investigate the following two aspects. First, what is the effect of inertia on Marangoni mode instability induced by wall deformability? Second, and more importantly, whether it is possible to use a deformable solid coating to obtain stable flow for the surfactant covered film for cases when the Marangoni number is below the critical value required for stabilization of free surface instability. In order to explore the first question, we continued the growth rates for the Marangoni mode from the creeping flow limit to finite Reynolds numbers (Re) and observed that while the increase in Reynolds number has a small stabilizing effect on growth rates, the Marangoni mode still remains unstable for finite Reynolds numbers as long as the wall is sufficiently deformable. The Marangoni mode remains the dominant mode for zero and small Reynolds numbers until the GL mode also becomes unstable with the increase in Re. Thus, for a given set of parameters and beyond a critical Re, there is an exchange of dominant mode of instability from the Marangoni to free surface GL mode. With respect to the second important aspect, our results clearly demonstrate

Interfacial dynamics driven by Marangoni stresses on a slowly moving liquid film

International Nuclear Information System (INIS)

Hewakandamby, Buddhika Naleen

2002-01-01

Differential surface tension is a common phenomenon in many chemical and biomedical processes. Localized surface tension gradients due to differential surface loading in thin films give rise to a moving shock front in the direction of higher surface tension. Existence of a background flow enhances the shock wave giving rise to wave breaking and wave separation mechanisms. The effect of a background flow field on Marangoni stress induced shock fronts were investigated in this thesis. Furthermore, a numerical procedure to find approximate solutions to the fully nonlinear flow problem that arises due to Marangoni spreading is proposed. A set of surface evolution equations that incorporates the effects of the background flow field is studied in two major respects: (i) breaking the horizontal symmetry and (ii) nonlinear accretion leading to shock front breaking or separation. The evolution of the surface is evaluated by numerical simulations for a wide range of parameter values. The investigation showed that there are two breaking mechanisms switched by the value of Peclet number. Furthermore it showed that the life time of the shock front is determined by the volumetric flow rate of the film. It is shown here that a weak Marangoni force generates a pure capillary gravity wave that propagates faster than the surfactant front. It is customary to use the lubrication approximations to simplify thin film problems. As a result, the inertial terms in flow equations and nonlinear terms in surface stress balances become excluded. To analyze the fully nonlinear flow, a finite element (FEM) analysis is proposed. The simulations shows that the lubrication theory holds globally in predicting the spreading rates but fails to do so locally until a quasi-steady state is reached. The FEM model shows the formation of two counter-rotating vortices at the beginning which diminishes as time evolves. The FEM results are compared with the lubrication theory simulations. The FEM model shows

Manipulation of Nano-/Micro Particles Using Light-Actuated Marangoni Tweezers

Science.gov (United States)

Lu, Cunjing; Varanakkottu, Subramanyan; Hardt, Steffen; Nano-; Microfluidics, Center of Smart Interfaces, TU Darmstadt Team

2015-11-01

The ability to manipulate and produce patterns of nano-/micro objects has been of great interest from both a fundamental and an application point of view. Here we demonstrate particle patterning using an optical landscape and optical nanoparticle manipulation based on light-actuated Marangoni tweezers. A liquid film with a photosurfactant which exists in two isomeric states (cis and trans) is employed for that purpose. Under multiple laser spots created by diffractive optical elements from a He-Cd laser, cis-rich regions with higher surface tension than unexposed trans-rich regions are created, resulting in converging Marangoni flows directing particles attached to the liquid surface toward the irradiated area. 10 μm polystyrene particles and 600 nm λ-DNA molecules distributed over the liquid surface move to the nearest laser spot and can be arranged in specific patterns. Furthermore, 100 nm polystyrene particles and 20 nm quantum dots can also be trapped, and the 100 nm particles can be driven along quite complex trajectories. Compared to conventional optical tweezers, the corresponding power requirements are much lower.

Spontaneous Marangoni Mixing of Miscible Liquids at a Liquid-Liquid-Air Contact Line.

Science.gov (United States)

Kim, Hyoungsoo; Lee, Jeongsu; Kim, Tae-Hong; Kim, Ho-Young

2015-08-11

We investigate the flow patterns created when a liquid drop contacts a reservoir liquid, which has implications on various physicochemical and biochemical reactions including mixing in microfluidic systems. The localized vortical flow spontaneously triggered by the difference of surface tension between the two liquids is studied, which is thus termed the Marangoni vortex. To quantitatively investigate the strength of vortices, we performed particle image velocimetry (PIV) experiments by varying the surface tension difference, the gap of the flow cell, the density and viscosity of the reservoir liquid, and the size of the drop. A scaling law that balances the interfacial energy of the system with the kinetic energy of the vortical flows allows us to understand the functional dependence of the Marangoni vortex strength on various experimental parameters.

CVB: the Constrained Vapor Bubble Capillary Experiment on the International Space Station MARANGONI FLOW REGION

Science.gov (United States)

Wayner, Peter C., Jr.; Kundan, Akshay; Plawsky, Joel

2014-01-01

The Constrained Vapor Bubble (CVB) is a wickless, grooved heat pipe and we report on a full- scale fluids experiment flown on the International Space Station (ISS). The CVB system consists of a relatively simple setup a quartz cuvette with sharp corners partially filled with either pentane or an ideal mixture of pentane and isohexane as the working fluids. Along with temperature and pressure measurements, the two-dimensional thickness profile of the menisci formed at the corners of the quartz cuvette was determined using the Light Microscopy Module (LMM). Even with the large, millimeter dimensions of the CVB, interfacial forces dominate in these exceedingly small Bond Number systems. The experiments were carried out at various power inputs. Although conceptually simple, the transport processes were found to be very complex with many different regions. At the heated end of the CVB, due to a high temperature gradient, we observed Marangoni flow at some power inputs. This region from the heated end to the central drop region is defined as a Marangoni dominated region. We present a simple analysis based on interfacial phenomena using only measurements from the ISS experiments that lead to a predictive equation for the thickness of the film near the heated end of the CVB. The average pressure gradient for flow in the film is assumed due to the measured capillary pressure at the two ends of the liquid film and that the pressure stress gradient due to cohesion self adjusts to a constant value over a distance L. The boundary conditions are the no slip condition at the wall interface and an interfacial shear stress at the liquid- vapor interface due to the Marangoni stress, which is due to the high temperature gradient. Although the heated end is extremely complex, since it includes three- dimensional variations in radiation, conduction, evaporation, condensation, fluid flow and interfacial forces, we find that using the above simplifying assumptions, a simple successful

Role of Bénard-Marangoni instabilities during solvent evaporation in polymer surface corrugations.

Science.gov (United States)

Bassou, N; Rharbi, Y

2009-01-06

Film formation through the drying of polymer solutions is a widely used process in laboratories and in many industrial applications such as coatings. One of the main goals of these applications is to control the film surface morphology. In many cases, evaporation has been found to yield corrugated patterns on the free surface of films. This has been interpreted in terms of either mechanical or hydrodynamic instabilities. In this article, we present experimental results where mesoscale 2D well-ordered surface corrugation patterns are formed during solvent evaporation from polystyrene/toluene solutions. The transformation of Benard-Marangoni instabilities into surface corrugation is studied during the entire drying process using particle tracking, 3D morphology analyses, etc. We show that the corrugation wavelength is controlled by the Benard-Marangoni instability, whereas the corrugation amplitude is controlled by a mechanism that involves a high evaporation rate.

Engineering flow states with localized forcing in a thin Marangoni-driven inclined film.

Science.gov (United States)

Levy, Rachel; Rosenthal, Stephen; Wong, Jeffrey

2010-11-01

Numerical simulations of lubrication models provide clues for experimentalists about the development of wave structures in thin liquid films. We analyze numerical simulations of a lubrication model for an inclined thin liquid film modified by Marangoni forces due to a thermal gradient and additional localized forcing heating the substrate. Numerical results can be explained through connections to theory for hyperbolic conservation laws predicting wave fronts from Marangoni-driven thin films without forcing. We demonstrate how a variety of forcing profiles, such as gaussian, rectangular, and triangular, affect the formation of downstream transient structures, including an N wave not commonly discussed in the context of thin films. Simulations employing a controlled approximation of a compressive-undercompressive wave pair demonstrate possibilities for applications of localized forcing as microfluidic valve. In the simulations, localized forcing provides a control parameter that can be used to determine mass flux and film profiles.

Dimensionless numbers in additive manufacturing

Science.gov (United States)

Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

2017-02-01

The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

Marangoni Convection in Evaporating Organic Liquid Droplets on a Nonwetting Substrate.

Science.gov (United States)

Chandramohan, Aditya; Dash, Susmita; Weibel, Justin A; Chen, Xuemei; Garimella, Suresh V

2016-05-17

We quantitatively characterize the flow field inside organic liquid droplets evaporating on a nonwetting substrate. A mushroom-structured surface yields the desired nonwetting behavior with methanol droplets, while use of a cooled substrate (5-15 °C) slows the rate of evaporation to allow quasi-static particle image velocimetry. Visualization reveals a toroidal vortex within the droplet that is characteristic of surface tension-driven flow; we demonstrate by means of a scaling analysis that this recirculating flow is Marangoni convection. The velocities in the droplet are on the order of 10-45 mm/s. Thus, unlike in the case of evaporation on wetting substrates where Marangoni convection can be ignored for the purpose of estimating the evaporation rate, advection due to the surface tension-driven flow plays a dominant role in the heat transfer within an evaporating droplet on a nonwetting substrate because of the large height-to-radius aspect ratio of the droplet. We formulate a reduced-order model that includes advective transport within the droplet for prediction of organic liquid droplet evaporation on a nonwetting substrate and confirm that the predicted temperature differential across the height of the droplet matches experiments.

A rapid one-step fabrication of patternable superhydrophobic surfaces driven by Marangoni instability.

Science.gov (United States)

Kang, Sung-Min; Hwang, Sora; Jin, Si-Hyung; Choi, Chang-Hyung; Kim, Jongmin; Park, Bum Jun; Lee, Daeyeon; Lee, Chang-Soo

2014-03-18

We present a facile and inexpensive approach without any fluorinated chemistry to create superhydrophobic surface with exceptional liquid repellency, transportation of oil, selective capture of oil, optical bar code, and self-cleaning. Here we show experimentally that the control of evaporation is important and can be used to form superhydrophobic surface driven by Marangoni instability: the method involves in-situ photopolymerization in the presence of a volatile solvent and porous PDMS cover to afford superhydrophobic surfaces with the desired combination of micro- and nanoscale roughness. The porous PDMS cover significantly affects Marangoni convection of coating fluid, inducing composition gradients at the same time. In addition, the change of concentration of ethanol is able to produce versatile surfaces from hydrophilic to superhydrophobic and as a consequence to determine contact angles as well as roughness factors. In conclusion, the control of evaporation under the polymerization provides a convenient parameter to fabricate the superhydrophobic surface, without application of fluorinated chemistry and the elegant nanofabrication technique.

Thermal Marangoni convection in two-phase flow of dusty Casson fluid

Science.gov (United States)

Mahanthesh, B.; Gireesha, B. J.

2018-03-01

This paper deals with the thermal Marangoni convection effects in magneto-Casson liquid flow through suspension of dust particles. The transpiration cooling aspect is accounted. The surface tension is assumed to be fluctuating linearly with temperature. The fluid and dust particle's temperature of the interface is chosen as a quadratic function of interface arc length. The governing problem is modelled by conservation laws of mass, momentum and energy for fluid and dust particle phase. Stretching transformation technique is utilized to form ordinary differential equations from the partial differential equations. Later, the numerical solutions based on Runge-Kutta-Fehlberg method are established. The momentum and heat transport distributions are focused on the outcome of distinct governing parameters. The results of Nusselt number is also presented and discussed. It is established that the heat transfer rate is higher in the case of dusty non-Newtonian fluid than dusty Newtonian fluid. The rate of heat transfer can be enhanced by suspending dust particles in a base liquid.

An analytical solution for the Marangoni mixed convection boundary layer flow

DEFF Research Database (Denmark)

Moghimi, M. A.; Kimiaeifar, Amin; Rahimpour, M.

2010-01-01

In this article, an analytical solution for a Marangoni mixed convection boundary layer flow is presented. A similarity transform reduces the Navier-Stokes equations to a set of nonlinear ordinary differential equations, which are solved analytically by means of the homotopy analysis method (HAM...... the convergence of the solution. The numerical solution of the similarity equations is developed and the results are in good agreement with the analytical results based on the HAM....

The Effect of Heat Transfer on MHD Marangoni Boundary Layer Flow Past a Flat Plate in Nanofluid

Directory of Open Access Journals (Sweden)

D. R. V. S. R. K. Sastry

2013-01-01

Full Text Available The problem of heat transfer on the Marangoni convection boundary layer flow in an electrically conducting nanofluid is studied. Similarity transformations are used to transform the set of governing partial differential equations of the flow into a set of nonlinear ordinary differential equations. Numerical solutions of the similarity equations are then solved through the MATLAB “bvp4c” function. Different nanoparticles like Cu, Al2O3, and TiO2 are taken into consideration with water as base fluid. The velocity and temperature profiles are shown in graphs. Also the effects of the Prandtl number and solid volume fraction on heat transfer are discussed.

The Marangoni convection induced by acetone desorption from the falling soap film

Science.gov (United States)

Sha, Yong; Li, Zhangyun; Wang, Yongyi; Huang, Jiali

2012-05-01

By means of the falling soap film tunnel and the Schlieren optical method, the Marangoni convection were observed directly in the immediate interfacial neighborhood during the desorption process of acetone from the falling soap film. Moreover, the hydraulic characteristics of the falling soap film tunnel, the acetone concentration, the surface tension of the soap liquid and the mass transfer has been investigated in details through the experimental or theoretical method.

Topological defects after a quench in a Bénard-Marangoni convection system.

Science.gov (United States)

Casado, S; González-Viñas, W; Mancini, H; Boccaletti, S

2001-05-01

We report experimental evidence of the fact that, in a Bénard-Marangoni conduction-convection transition, the density of defects in the emerging structure scales as a power law in the quench time needed for the control parameter to ramp through the threshold. The obtained scaling exponents differ from the ones predicted and observed in the case in which the defects correspond to zeros in the amplitude of the global two-dimensional field.

Microscale fluid transport using optically controlled marangoni effect

Science.gov (United States)

Thundat, Thomas G [Knoxville, TN; Passian, Ali [Knoxville, TN; Farahi, Rubye H [Oak Ridge, TN

2011-05-10

Low energy light illumination and either a doped semiconductor surface or a surface-plasmon supporting surface are used in combination for manipulating a fluid on the surface in the absence of any applied electric fields or flow channels. Precise control of fluid flow is achieved by applying focused or tightly collimated low energy light to the surface-fluid interface. In the first embodiment, with an appropriate dopant level in the semiconductor substrate, optically excited charge carriers are made to move to the surface when illuminated. In a second embodiment, with a thin-film noble metal surface on a dispersive substrate, optically excited surface plasmons are created for fluid manipulation. This electrode-less optical control of the Marangoni effect provides re-configurable manipulations of fluid flow, thereby paving the way for reprogrammable microfluidic devices.

Photothermally controlled Marangoni flow around a micro bubble

International Nuclear Information System (INIS)

Namura, Kyoko; Nakajima, Kaoru; Kimura, Kenji; Suzuki, Motofumi

2015-01-01

We have experimentally investigated the control of Marangoni flow around a micro bubble using photothermal conversion. Using a focused laser spot acting as a highly localized heat source on Au nanoparticles/dielectric/Ag mirror thin film enables us to create a micro bubble and to control the temperature gradient around the bubble at a micrometer scale. When we irradiate the laser next to the bubble, a strong main flow towards the bubble and two symmetric rotation flows on either side of it develop. The shape of this rotation flow shows a significant transformation depending on the relative position of the bubble and the laser spot. Using this controllable rotation flow, we have demonstrated sorting of the polystyrene spheres with diameters of 2 μm and 0.75 μm according to their size

Photothermally controlled Marangoni flow around a micro bubble

Science.gov (United States)

Namura, Kyoko; Nakajima, Kaoru; Kimura, Kenji; Suzuki, Motofumi

2015-01-01

We have experimentally investigated the control of Marangoni flow around a micro bubble using photothermal conversion. Using a focused laser spot acting as a highly localized heat source on Au nanoparticles/dielectric/Ag mirror thin film enables us to create a micro bubble and to control the temperature gradient around the bubble at a micrometer scale. When we irradiate the laser next to the bubble, a strong main flow towards the bubble and two symmetric rotation flows on either side of it develop. The shape of this rotation flow shows a significant transformation depending on the relative position of the bubble and the laser spot. Using this controllable rotation flow, we have demonstrated sorting of the polystyrene spheres with diameters of 2 μm and 0.75 μm according to their size.

Patterning of ultrathin polymethylmethacrylate films by in-situ photodirecting of the Marangoni flow

Energy Technology Data Exchange (ETDEWEB)

Elashnikov, Roman [Department of Solid State Engineering, University of Chemistry and Technology, 16628 Prague, Czech Repuiblic (Czech Republic); Fitl, Premysl [Department of Physics and Measurements, University of Chemistry and Technology, 16628 Prague, Czech Repuiblic (Czech Republic); Svorcik, Vaclav [Department of Solid State Engineering, University of Chemistry and Technology, 16628 Prague, Czech Repuiblic (Czech Republic); Lyutakov, Oleksiy, E-mail: lyutakoo@vscht.cz [Department of Solid State Engineering, University of Chemistry and Technology, 16628 Prague, Czech Repuiblic (Czech Republic)

2017-02-01

Highlights: • The preparation of periodical structures on the polymer surface using photo-directing of Marangoni flow is described. • The surface tension gradient appears due to the spatial distribution of energy in the laser beam and leads to the creation of periodical structures. • The method allows the creation of surface structures with different symmetry, from simple line array to more complex geometries. - Abstract: Laser heating and Marangoni flow result in the formation of surface structures with different geometries and shape on thin polymer films. By laser beam irradiation combined with a sample movement the solid polymethylmethacrylate (PMMA) films are heated and undergo phase transition which leads to a material flow. Since the laser beam has a non-linear distribution of energy, the PMMA film is heated inhomogeneously and a surface tension gradient in a lateral direction is introduced. During this procedure additional phenomena such as “reversible” or cyclic polymer flow also take place. The careful choice of experimental conditions enables the preparation of patterns with sophisticated geometries and with hierarchical pattern organization. Depending on initial PMMA film thickness and speed of the sample movement line arrays are created, which can subsequently be transformed into the crimped lines or system of circular holes. In addition, the introduction of a constant acceleration in the sample movement or a laser beam distortion enables the preparation of regularly crimped lines, ordered hexagonal holes or overlapped plates.

Comparison of Electromagnetic and Marangoni Forces on Thin Coatings during Rapid Heating Process

Science.gov (United States)

Steinberg, T.; Opitz, T.; Rybakov, A.; Baake, E.

2018-05-01

The present paper is dedicated to the investigation of Marangoni and Lorentz forces in a rapid heating process. During the melting of aluminum-silicon (AlSi) layer on the bor-manganese steel 22MnB5, the liquid AlSi is shifting from the middle to the side and leaves dry spots on the steel due to a combination of both forces. In order to solve this process design issue, the impact of each force in the process will be evaluated. Evaluation is carried out using experimental data and numerical simulation.

Marangoni convection in Casson liquid flow due to an infinite disk with exponential space dependent heat source and cross-diffusion effects

Science.gov (United States)

Mahanthesh, B.; Gireesha, B. J.; Shashikumar, N. S.; Hayat, T.; Alsaedi, A.

2018-06-01

Present work aims to investigate the features of the exponential space dependent heat source (ESHS) and cross-diffusion effects in Marangoni convective heat mass transfer flow due to an infinite disk. Flow analysis is comprised with magnetohydrodynamics (MHD). The effects of Joule heating, viscous dissipation and solar radiation are also utilized. The thermal and solute field on the disk surface varies in a quadratic manner. The ordinary differential equations have been obtained by utilizing Von Kármán transformations. The resulting problem under consideration is solved numerically via Runge-Kutta-Fehlberg based shooting scheme. The effects of involved pertinent flow parameters are explored by graphical illustrations. Results point out that the ESHS effect dominates thermal dependent heat source effect on thermal boundary layer growth. The concentration and temperature distributions and their associated layer thicknesses are enhanced by Marangoni effect.

Propelling a water drop with the vapor-mediated Marangoni effect

Science.gov (United States)

Kim, Seungho; Kim, Ho-Young

2013-11-01

We show that a water drop on solid surfaces can be propelled just by placing a volatile alcohol drop nearby. It is found to be because the water-air interface near the alcohol drop mixes with alcohol vapor, thereby locally lowering the surface tension. The surface-tension-gradient induces the motion of the water drop, enabling the trajectory control of water drops through the motion of remote alcohol drops. This vapor-mediated Marangoni effect also gives rise to other interesting interfacial flow phenomena, such as nucleation of holes on a water film and ballooning of a water drop hanging from a syringe needle with the approach of an alcohol drop. We visualize such interfacial dynamics with a high-speed camera and rationalize their salient features by scaling analysis. This work was supported by the National Research Foundation of Korea (grant no. 2012-008023).

Mecanismos de desgaste en refractarios de colada continua asociados al efecto Marangoni

Directory of Open Access Journals (Sweden)

Brandaleze, E.

2005-12-01

Full Text Available Nozzle wear during continuous casting process is caused by physical and chemical reasons and also by refractory quality. A post mortem study on a sample of Al₂O₃ - graphite nozzle with a ZrO₂ insert allows to identify the present wear mechanisms. Different cyclic stages are carried out due to recurrent changes of interfacial tension and fluid convection. When the surface tension promote the refractory wetting by the steel, graphite of the nozzle surface is lost. Then, grains of ZrO₂ and of Al₂O₃ are dissolved by slag contact. This type of wear is associated with the Marangoni effect. Light and electronic microscopy was used to observe the refractory structure and by a cathodoluminiscence technique phases transformations under process conditions are determined.

Las buzas sumergidas se erosionan durante el proceso de la colada continua, debido a causas físicas, químicas y a la calidad del refractario. El estudio post mortem de una buza de Al₂O₃ -grafito con inserto de ZrO₂ permite identificar los mecanismos de desgaste presentes, que ocurren por etapas debido a cambios cíclicos de tensión interfacial y convección de fluidos. Cuando la tensión superficial favorece la mojabilidad del refractario por el acero, la buza pierde grafito de la superficie. Luego, los granos de ZrO₂ y de Al₂O₃ se disuelven al ser mojados por la escoria. Este desgaste está asociado al efecto Marangoni. Se observa la microestructura mediante microscopía óptica y electrónica y, por catodoluminiscencia, se determinan las transformaciones de fases ocurridas en condiciones de proceso.

Thermosolutal Marangoni boundary layer magnetohydrodynamic flow with the Soret and Dufour effects past a vertical flat plate

Directory of Open Access Journals (Sweden)

A. Mahdy

2015-03-01

Full Text Available A numerical study of laminar magnetohydrodynamic thermosolutal Marangoni convection along a vertical surface in the presence of the Soret and Dufour effects has been performed. The diffusion-thermo implies that the heat transfer is induced by concentration gradient, and thermo-diffusion implies that the mass diffusion is induced by thermal gradient. In conformity to actuality, it is assumed that the surface tension varies linearly with both the temperature and concentration and that both interface temperature and concentration are quadratic functions of the interface arc length x. The general governing partial differential equations are converted into nonlinear ordinary differential equations using unique similarity transformations. The aim of this study is to investigate the effects of Hartmann number (0 ≤ M ≤ 5, thermosolutal surface tension ratio (0 ≤ R ≤ 5, Soret parameter (0.1 ≤ Sr ≤ 2, Dufour parameter (0.03 ≤ Du ≤ 0.6, Prandtl number (0.72 ≤ Pr ≤ 10 and Schmidt number (0.3 ≤ Sc ≤ 3 on the fluid velocity heat and mass transfer. It is found that, both of temperature and concentration gradient at the wall increases as the thermosolutal surface tension ratio increases. Also, the increase in Prandtl number results in an enhancement in the heat transfer at the wall.

Critical number of flavors in QED

International Nuclear Information System (INIS)

Bashir, A.; Gutierrez-Guerrero, L. X.; Calcaneo-Roldan, C.; Tejeda-Yeomans, M. E.

2011-01-01

We demonstrate that in unquenched quantum electrodynamics (QED), chiral symmetry breaking ceases to exist above a critical number of fermion flavors N f . This is a necessary and sufficient consequence of the fact that there exists a critical value of electromagnetic coupling α beyond which dynamical mass generation gets triggered. We employ a multiplicatively renormalizable photon propagator involving leading logarithms to all orders in α to illustrate this. We study the flavor and coupling dependence of the dynamically generated mass analytically as well as numerically. We also derive the scaling laws for the dynamical mass as a function of α and N f . Up to a multiplicative constant, these scaling laws are related through (α,α c )↔(1/N f ,1/N f c ). Calculation of the mass anomalous dimension γ m shows that it is always greater than its value in the quenched case. We also evaluate the β function. The criticality plane is drawn in the (α,N f ) phase space which clearly depicts how larger N f is required to restore chiral symmetry for an increasing interaction strength.

Critical radius and critical number of gas atoms for cavities containing a Van der Waals gas

International Nuclear Information System (INIS)

Coghlan, W.A.; Mansur, L.K.

1983-01-01

The effect of gas on void nucleation and growth is particularly important for structural materials in fusion reactors because of the high production of helium by neutron-induced transmutation reactions. Gas reduces the critical radius for bias driven growth and there is a critical number of gas atoms, n/sub g/*, at which the critical radius is reduced essentially to zero. The significance of this is that the time interval to the accumulation of n/sub g/* gas atoms may determine the time to the onset of bias driven swelling where n/sub g/* is large. In previous papers these critical quantities were given for an ideal gas. Recently, we presented the results for a Van der Waals gas. Here the derivation of these relations is presented and further results of calculations are given. At low temperatures (high pressures) the results depart from those of the ideal gas, with the critical number affected more strongly than the critical radius. Comparisons are made with earlier calculations

On star-critical and upper size Ramsey numbers

NARCIS (Netherlands)

Zhang, Yanbo; Broersma, Haitze J.; Chen, Yaojun

2016-01-01

In this paper, we study the upper size Ramsey number u(G1,G2)u(G1,G2), defined by Erdős and Faudree, as well as the star-critical Ramsey number r∗(G1,G2)r∗(G1,G2), defined by Hook and Isaak. We define Ramsey-full graphs and size Ramsey good graphs, and perform a detailed study on these graphs. We

SPENT NUCLEAR FUEL NUMBER DENSITIES FOR MULTI-PURPOSE CANISTER CRITICALITY CALCULATIONS

International Nuclear Information System (INIS)

D. A. Thomas

1996-01-01

The purpose of this analysis is to calculate the number densities for spent nuclear fuel (SNF) to be used in criticality evaluations of the Multi-Purpose Canister (MPC) waste packages. The objective of this analysis is to provide material number density information which will be referenced by future MPC criticality design analyses, such as for those supporting the Conceptual Design Report

A Multiple-Scale Analysis of Evaporation Induced Marangoni Convection

KAUST Repository

Hennessy, Matthew G.

2013-04-23

This paper considers the stability of thin liquid layers of binary mixtures of a volatile (solvent) species and a nonvolatile (polymer) species. Evaporation leads to a depletion of the solvent near the liquid surface. If surface tension increases for lower solvent concentrations, sufficiently strong compositional gradients can lead to Bénard-Marangoni-type convection that is similar to the kind which is observed in films that are heated from below. The onset of the instability is investigated by a linear stability analysis. Due to evaporation, the base state is time dependent, thus leading to a nonautonomous linearized system which impedes the use of normal modes. However, the time scale for the solvent loss due to evaporation is typically long compared to the diffusive time scale, so a systematic multiple scales expansion can be sought for a finite-dimensional approximation of the linearized problem. This is determined to leading and to next order. The corrections indicate that the validity of the expansion does not depend on the magnitude of the individual eigenvalues of the linear operator, but it requires these eigenvalues to be well separated. The approximations are applied to analyze experiments by Bassou and Rharbi with polystyrene/toluene mixtures [Langmuir, 25 (2009), pp. 624-632]. © 2013 Society for Industrial and Applied Mathematics.

A Multiple-Scale Analysis of Evaporation Induced Marangoni Convection

KAUST Repository

Hennessy, Matthew G.; Mü nch, Andreas

2013-01-01

This paper considers the stability of thin liquid layers of binary mixtures of a volatile (solvent) species and a nonvolatile (polymer) species. Evaporation leads to a depletion of the solvent near the liquid surface. If surface tension increases for lower solvent concentrations, sufficiently strong compositional gradients can lead to Bénard-Marangoni-type convection that is similar to the kind which is observed in films that are heated from below. The onset of the instability is investigated by a linear stability analysis. Due to evaporation, the base state is time dependent, thus leading to a nonautonomous linearized system which impedes the use of normal modes. However, the time scale for the solvent loss due to evaporation is typically long compared to the diffusive time scale, so a systematic multiple scales expansion can be sought for a finite-dimensional approximation of the linearized problem. This is determined to leading and to next order. The corrections indicate that the validity of the expansion does not depend on the magnitude of the individual eigenvalues of the linear operator, but it requires these eigenvalues to be well separated. The approximations are applied to analyze experiments by Bassou and Rharbi with polystyrene/toluene mixtures [Langmuir, 25 (2009), pp. 624-632]. © 2013 Society for Industrial and Applied Mathematics.

The exact effects of radiation and joule heating on magnetohydrodynamic Marangoni convection over a flat surface

Directory of Open Access Journals (Sweden)

Khaled S.M.

2018-01-01

Full Text Available In this paper, we re-investigate the problem describing effects of radiation, Joule heating, and viscous dissipation on magnetohydrodynamic Marangoni convection boundary layer over a flat surface with suction/injection. The analytical solution obtained for the reduced system of non-linear-coupled differential equations governing the problem. Laplace transform successfully implemented to get the exact expression for the temperature profile. Furthermore, comparing the current exact results with approximate numerical results obtained using Runge-Kutta-Fehlberg method is introduced. These comparisons declare that the published numerical results agree with the current exact results. In addition, the effects of various parameters on the temperature profile are discussed graphically.

Marangoni-buoyancy convection in binary fluids under varying noncondensable concentrations

Science.gov (United States)

Li, Yaofa; Yoda, Minami

2014-11-01

Marangoni-buoyancy convection in binary fluids in the presence of phase change is a complex and poorly understood problem. Nevertheless, this flow is of interest in evaporative cooling because solutocapillary stresses could reduce film dryout. Convection was therefore studied in methanol-water (MeOH-H2O) layers of depth h ~ 1 - 3 mm confined in a sealed rectangular cell driven by horizontal temperature differences of ~6° C applied over ~ 5 cm. Particle-image velocimetry (PIV) was used to study how varying the fraction of noncondensables (i.e., air) ca from ~ 7 mol% to ambient conditions in the vapor space affects soluto- and thermocapillary stresses in this flow. Although solutocapillary stresses can be used to drive the flow towards hot regions, solutocapillarity appears to have the greatest effect on the flow at small ca, because noncondensables suppress phase change and hence the gradient in the liquid-phase composition at the interface. Surprisingly, convection at ca ~ 50 % leads to a very weak flow and significant condensation in the central portion of the layer i.e., away from the heated and cooled walls). Supported by ONR.

Evaporative Optical Marangoni Assembly: Tailoring the Three-Dimensional Morphology of Individual Deposits of Nanoparticles from Sessile Drops.

Science.gov (United States)

Anyfantakis, Manos; Varanakkottu, Subramanyan Namboodiri; Rudiuk, Sergii; Morel, Mathieu; Baigl, Damien

2017-10-25

We have recently devised the evaporative optical Marangoni assembly (eOMA), a novel and versatile interfacial flow-based method for directing the deposition of colloidal nanoparticles (NPs) on solid substrates from evaporating sessile drops along desired patterns using shaped UV light. Here, we focus on a fixed UV spot irradiation resulting in a cylinder-like deposit of assembled particles and show how the geometrical features of the single deposit can be tailored in three dimensions by simply adjusting the optical conditions or the sample composition, in a quantitative and reproducible manner. Sessile drops containing cationic NPs and a photosensitive surfactant at various concentrations are allowed to evaporate under a single UV beam with a diameter much smaller than that of the drop. After complete evaporation, the geometrical characteristics of the NP deposits are precisely assessed using optical profilometry. We show that both the volume and the radial size of the light-directed NP deposit can be adjusted by varying the diameter or the intensity of the UV beam or alternatively by changing the concentration of the photosensitive surfactant. Notably, in all these cases, the deposits display an almost constant median height corresponding to a few layers of particles. Moreover, both the radial and the axial extent of the patterns are tuned by changing the NP concentration. These results are explained by the correlation among the strength of Marangoni flow, the particle trapping efficiency, and the volume of the deposit, and by the role of evaporation-driven flow in strongly controlling the deposit height. Finally, we extend the versatility of eOMA by demonstrating that NPs down to 30 nm in diameter can be effectively patterned on glass or polymeric substrates.

Theoretical Analysis on Marangoni-driven Cavity Formation in Ice during In Situ Burning of Oil Spills in Ice-infested Waters

Science.gov (United States)

Farmahini Farahani, H.; Jomaas, G.; Rangwala, A. S.

2017-12-01

In situ burning, intentional burning of discharged oil on the water surface, is a promising response method to oil spill accidents in the Arctic. However, burning of the oil adjacent to ice bodies creates a lateral cavity in the ice. As a result of the cavity formation the removal efficiency which is a key success criterion for in situ burning operation will decrease. The formation of lateral cavities are noticed recently and only a few experimental studies have addressed them. These experiments have shown lateral cavities with a length of severe horizontal temperature gradient which in turn generates a Marangoni flow from hot to cold regions. This is found to be the dominant heat transfer mechanism that is providing the heat for the ice to melt. Here, we introduce an order of magnitude analysis on the governing equations of the ice melting problem to estimate the penetration length of a burning oil near ice. This correlation incorporates the flame heat feedback with the surface flow driven by Marangoni convection. The melting energy continuity is also included in the analysis to complete the energy transfer cycle that leads to melting of the ice. The comparison between this correlation and the existing experimental data shows a very good agreement. Therefore, this correlation can be used to estimate the penetration length for burning of an actual spill and can be applied towards improved guidelines of burning adjacent to ice bodies, so as to enhance the chances for successful implantation of in situ burning.

Scrutinization of thermal radiation, viscous dissipation and Joule heating effects on Marangoni convective two-phase flow of Casson fluid with fluid-particle suspension

Science.gov (United States)

Mahanthesh, B.; Gireesha, B. J.

2018-03-01

The impact of Marangoni convection on dusty Casson fluid boundary layer flow with Joule heating and viscous dissipation aspects is addressed. The surface tension is assumed to vary linearly with temperature. Physical aspects of magnetohydrodynamics and thermal radiation are also accounted. The governing problem is modelled under boundary layer approximations for fluid phase and dust particle phase and then Runge-Kutta-Fehlberg method based numeric solutions are established. The momentum and heat transport mechanisms are focused on the result of distinct governing parameters. The Nusselt number is also calculated. It is established that the rate of heat transfer can be enhanced by suspending dust particles in the base fluid. The temperature field of fluid phase and temperature of dust phase are quite reverse for thermal dust parameter. The radiative heat, viscous dissipation and Joule heating aspects are constructive for thermal fields of fluid and dust phases. The velocity of dusty Casson fluid dominates the velocity of dusty fluid while this trend is opposite in the case of temperature. Moreover qualitative behaviour of fluid phase and dust phase temperature/velocity are similar.

Effect of pool rotation on three-dimensional flow in a shallow annular pool of silicon melt with bidirectional temperature gradients

Energy Technology Data Exchange (ETDEWEB)

Zhang, Quan-Zhuang; Peng, Lan; Liu, Jia [Key Laboratory of Low-grade Energy Utilization Technologies and Systems of Ministry of Education, College of Power Engineering, Chongqing University, Chongqing, 400044 (China); Wang, Fei, E-mail: penglan@cqu.edu.cn [Chongqing Special Equipment Inspection and Research Institute, Chongqing, 401121 (China)

2016-08-15

In order to understand the effect of pool rotation on silicon melt flow with the bidirectional temperature gradients, we conducted a series of unsteady three-dimensional (3D) numerical simulations in a shallow annular pool. The bidirectional temperature gradients are produced by the temperature difference between outer and inner walls as well as a constant heat flux at the bottom. Results show that when Marangoni number is small, a 3D steady flow is common without pool rotation. But it bifurcates to a 3D oscillatory flow at a low rotation Reynolds number. Subsequently, the flow becomes steady and axisymmetric at a high rotation Reynolds number. When the Marangoni number is large, pool rotation can effectively suppress the temperature fluctuation on the free surface, meanwhile, it improves the flow stability. The critical heat flux density diagrams are mapped, and the effects of radial and vertical temperature gradients on the flow are discussed. Additionally, the transition process from the flow dominated by the radial temperature gradient to the one dominated by the vertical temperature gradient is presented. (paper)

Fully developed MHD turbulence near critical magnetic Reynolds number

International Nuclear Information System (INIS)

Leorat, J.; Pouquet, A.; Frisch, U.

1981-01-01

Liquid-sodium-cooled breeder reactors may soon be operating at magnetic Reynolds numbers Rsup(M) where magnetic fields can be self-excited by a dynamo mechanism. Such flows have kinetic Reynolds numbers Rsup(V) of the order of 10 7 and are therefore highly turbulent. The behaviour of MHD turbulence with high Rsup(V) and low magnetic Prandtl numbers is investigated, using the eddy-damped quasi-normal Markovian closure applied to the MHD equations. For simplicity the study is restricted to homogeneous and isotropic turbulence, but includes helicity. A critical magnetic Reynolds number Rsub(c)sup(M) of the order of a few tens (non-helical case) is obtained above which magnetic energy is present. Rsub(c)sup(M) is practically independent of Rsup(V) (in the range 40 to 10 6 ) and can be considerably decreased by the presence of helicity. No attempt is made to obtain quantitative estimates for a breeder reactor, but discuss some of the possible consequences of exceeding Rsub(c)sup(M) such as decreased turbulent heat transport. (author)

A computational study of droplet evaporation with fuel vapor jet ejection induced by localized heat sources

KAUST Repository

Sim, Jaeheon; Im, Hong G.; Chung, Suk-Ho

2015-01-01

parametric study demonstrated that the Marangoni effect is indeed significant at realistic droplet combustion conditions, resulting in a higher evaporation constant. A modified Marangoni number was derived in order to represent the surface force

Determination of the critical Shields number for particle erosion in laminar flow

OpenAIRE

Ouriemi , Malika; Aussillous , Pascale; Medale , Marc; Peysson , Yannick; Guazzelli , Élisabeth

2007-01-01

International audience; We present reproducible experimental measurements for the onset of grain motion in laminar flow and find a constant critical Shields number for particle erosion, i.e., c = 0.12± 0.03, over a large range of small particle Reynolds number: 1.5 10 −5 Re p 0.76. Comparison with previous studies found in the literature is provided.

Negative Magnus Effect on a Rotating Sphere at around the Critical Reynolds Number

International Nuclear Information System (INIS)

Muto, Masaya; Watanabe, Hiroaki; Tsubokura, Makoto; Oshima, Nobuyuki

2011-01-01

Negative Magnus lift acting on a sphere rotating about the axis perpendicular to an incoming flow is investigated using large-eddy simulation at three Reynolds numbers of 1.0× 10 4 , 2.0 × 10 5 , and 1.14 × 10 6 . The numerical methods adopted are first validated on a non-rotating sphere and the spatial resolution around the sphere is determined so as to reproduce the laminar separation, reattachment, and turbulent transition of the boundary layer observed at around the critical Reynolds number. In the rotating sphere, positive or negative Magnus effect is observed depending on the Reynolds number and the rotating speed imposed. At the Reynolds number in the subcritical or supercritical region, the direction of the lift force follows the Magnus effect to be independent of the rotational speed tested here. In contrast, negative lift is observed at the Reynolds number at the critical region when particular rotating speeds are imposed. The negative Magnus effect is discussed in the context of the suppression or promotion of boundary layer transition around the separation point.

Negative Magnus lift on a rotating sphere at around the critical Reynolds number

Science.gov (United States)

Muto, Masaya; Tsubokura, Makoto; Oshima, Nobuyuki

2012-01-01

Negative Magnus lift acting on a sphere rotating about the axis perpendicular to an incoming flow was investigated using large-eddy simulation at three Reynolds numbers of 1.0 × 104, 2.0 × 105, and 1.14 × 106. The numerical methods used were first validated on a non-rotating sphere, and the spatial resolution around the sphere was determined so as to reproduce the laminar separation, reattachment, and turbulent transition of the boundary layer observed in the vicinity of the critical Reynolds number. The rotating sphere exhibited a positive or negative Magnus effect depending on the Reynolds number and the imposed rotating speed. At Reynolds numbers in the subcritical or supercritical regimes, the direction of the Magnus lift force was independent of the rotational speed. In contrast, the lift force was negative in the critical regime when particular rotating speeds were imposed. This negative Magnus effect was investigated in the context of suppression or promotion of boundary layer transition around the separation point.

Magnus effects at high angles of attack and critical Reynolds numbers

Science.gov (United States)

Seginer, A.; Ringel, M.

1983-01-01

The Magnus force and moment experienced by a yawed, spinning cylinder were studied experimentally in low speed and subsonic flows at high angles of attack and critical Reynolds numbers. Flow-field visualization aided in describing a flow model that divides the Magnus phenomenon into a subcritical region, where reverse Magnus loads are experienced, and a supercritical region where these loads are not encountered. The roles of the spin rate, angle of attack, and crossflow Reynolds number in determining the boundaries of the subcritical region and the variations of the Magnus loads were studied.

Aerodynamic forces and galloping instability for a skewed elliptical cylinder in a flow at the critical Reynolds number

Energy Technology Data Exchange (ETDEWEB)

Ma, Wenyong [Wind Engineering Research Center, Shijiazhuang Tiedao University, Shijiazhuang, Hebei 050043 (China); Liu, Qingkuan; Liu, Xiaobing [The Key Laboratory for Health Monitoring and Control of Large Structures, Hebei province, 050043 (China); Du, Xiaoqing, E-mail: ma@stdu.edu.cn, E-mail: dxq@shu.edu.cn [Department of Civil Engineering, Shanghai University, Shanghai, 200072 (China)

2017-08-15

The mechanism of large-amplitude aeroelastic vibrations of cylindrical bodies in the critical Reynolds number range are still unclear. This study concerns the aerodynamic forces acting on elliptical cylinders and the induced galloping instability resulting from skew flows (i.e., the direction of the flow is angled 0°–45° with respect to the central axis of the cylinder) for Reynolds numbers in the range of 37–235 k. The effects of the critical Reynolds number and the skew angle on the aerodynamic forces and the galloping instability are investigated with pressure wind tunnel tests. In all of the cases investigated in the present study, a sharp decrease in the lift coefficient with increasing angle of attack and a reduction in the drag coefficient at the critical Reynolds number could be responsible for the galloping instability. Variations in the torque coefficient leads to a torsional aerodynamic instability at the critical Reynolds number. Furthermore, the skew flow cause a critical flow state at lower Reynolds numbers. One possible reason for this behavior is that the longer effective cross section allows the flow to reattach. (paper)

Solutal Marangoni flow as the cause of ring stains from drying salty colloidal drops

Science.gov (United States)

Marin, Alvaro; Karpitschka, Stefan; Rossi, Massimiliano; Kaehler, Christian J.; Noguera-Marin, Diego; Rodriguez-Valverde, Miguel A.

2017-11-01

Salts can be found in different forms in almost any evaporating droplet in nature, our homes and in laboratories. The transport processes in such apparently simple systems differ strongly from `sweet' evaporating droplets since the liquid flows in the inverse direction due to Marangoni stresses at the surface. Such an effect has crucial consequences to salt crystallization processes and to the evaporation itself. In this work we show measurements that not only confirm clearly the details of the inverted flow patterns, but also permit us to calculate the surface tension gradients responsible for the reversal. Such a reversal does not prevent the coffee-stain effect; on the contrary, particles accumulate and get trapped at the liquid-air interface driven by the surface flow. In order to prove this, we show measurements of the full three-dimensional flow inside the evaporating salty droplet, confocal imaging is used to quantify the growth of the particle deposits for different salt concentrations, and we compare the experimental results with numerical simulations that capture the solvent evaporation, the evaporation-induced liquid flow and the quasi-equilibrium liquid-gas interface.

Critical exponents for square lattice trails with a fixed number of vertices of degree 4

International Nuclear Information System (INIS)

James, E W; Soteros, C E

2002-01-01

We prove several previously conjectured results about the number of n-edge trails and n-edge embeddings of Eulerian graphs, each with a fixed number, k, of degree 4 vertices, in the lattice Z 2 . In particular, under the assumption that the relevant critical exponents exist, we prove that the difference between the critical exponent for closed trails (Eulerian graph embeddings) and that for self-avoiding circuits (polygons) is exactly k, the number of degree 4 vertices. Similarly, we prove that the difference between the critical exponent for either open trails or open Eulerian graph embeddings and that for self-avoiding walks is also k. These results are proved by establishing upper and lower bounds for the number of n-edge embeddings of closed (open) Eulerian graphs with k vertices of degree 4 in terms of the number of n-edge self-avoiding polygons (walks). The lower bounds are proved using a Kesten pattern theorem argument and the upper bounds are established by developing (based on a detailed case analysis) a method for removing vertices of degree 4 from an embedding by altering at most a constant (independent of n) number of vertices and edges of the embedding. The work presented here extends and improves the arguments first given in the work of Zhao and Lookman (1993 J. Phys. A: Math. Gen. 26 1067-76)

Natural convection with evaporation in a vertical cylindrical cavity under the effect of temperature-dependent surface tension

Science.gov (United States)

Kozhevnikov, Danil A.; Sheremet, Mikhail A.

2018-01-01

The effect of surface tension on laminar natural convection in a vertical cylindrical cavity filled with a weak evaporating liquid has been analyzed numerically. The cylindrical enclosure is insulated at the bottom, heated by a constant heat flux from the side, and cooled by a non-uniform evaporative heat flux from the top free surface having temperature-dependent surface tension. Governing equations with corresponding boundary conditions formulated in dimensionless stream function, vorticity, and temperature have been solved by finite difference method of the second-order accuracy. The influence of Rayleigh number, Marangoni number, and aspect ratio on the liquid flow and heat transfer has been studied. Obtained results have revealed that the heat transfer rate at free surface decreases with Marangoni number and increases with Rayleigh number, while the average temperature inside the cavity has an opposite behavior; namely, it growths with Marangoni number and reduces with Rayleigh number.

On graphs double-critical with respect to the colouring number

DEFF Research Database (Denmark)

Pedersen, Anders Sune; Kriesell, Matthias

2015-01-01

The colouring number col(G) of a graph $G$ is the smallest integer k for which there is an ordering of the vertices of G such that when removing the vertices of G in the specified order no vertex of degree more than k-1 in the remaining graph is removed at any step. An edge e of a graph G is said...... with the ratio of double-col-critical edges between 1- \\epsilon and 1....

Simulations of thermal Rayleigh-Marangoni convection in a three-layer liquid-metal-battery model

Science.gov (United States)

Köllner, Thomas; Boeck, Thomas; Schumacher, Jörg

2017-11-01

Operating a liquid-metal battery produces Ohmic losses in the electrolyte layer that separates both metal electrodes. As a consequence, temperature gradients establish which potentially cause thermal convection since density and interfacial tension depend on the local temperature. In our numerical investigations, we considered three plane, immiscible layers governed by the Navier-Stokes-Boussinesq equations held at a constant temperature of 500°C at the bottom and top. A homogeneous current is applied that leads to a preferential heating of the mid electrolyte layer. We chose a typical material combination of Li separated by LiCl-KCl (a molten salt) from Pb-Bi for which we analyzed the linear stability of pure thermal conduction and performed three-dimensional direct-numerical simulations by a pseudospectral method probing different: electrolyte layer heights, overall heights, and current densities. Four instability mechanisms are identified, which are partly coupled to each other: buoyant convection in the upper electrode, buoyant convection in the molten salt layer, and Marangoni convection at both interfaces between molten salt and electrode. The global turbulent heat transfer follows scaling predictions for internally heated buoyant convection. Financial support by the Deutsche Forschungsgemeinschaft under Grant No. KO 5515/1-1 is gratefully acknowledged.

Surfactants and the Rayleigh-Taylor instability of Couette type flows

Science.gov (United States)

Frenkel, A. L.; Halpern, D.; Schweiger, A. S.

2011-11-01

We study the Rayleigh-Taylor instability of slow Couette- type flows in the presence of insoluble surfactants. It is known that with zero gravity, the surfactant makes the flow unstable to longwave disturbances in certain regions of the parameter space; while in other parametric regions, it reinforces the flow stability (Frenkel and Halpern 2002). Here, we show that in the latter parametric sectors, and when the (gravity) Bond number Bo is below a certain threshold value, the Rayleigh-Taylor instability is completely stabilized for a finite interval of Ma, the (surfactant) Marangoni number: MaL Ma2. For Ma Ma2, and also for MaL Ma2 as functions of the Bond number. We note that (for an interval of the Bond number) there are two distinct criticalities with nonzero (and distinct) critical wavenumbers.

Silver nanoparticle colloids with γ-cyclodextrin: enhanced stability and Gibbs–Marangoni flow

Energy Technology Data Exchange (ETDEWEB)

Amiri, Setareh; Duroux, Laurent; Larsen, Kim Lambertsen, E-mail: kll@bio.aau.dk [Aalborg University, Department of Chemistry and Bioscience (Denmark)

2015-01-15

Although cyclodextrins (CD) are effective stabilizers for metal nanoparticle colloids, differences between α-, β- and γ-CD in stabilizing such colloids have not been previously reported. In this study, silver nanoparticles (AgNP) were synthesized using NaBH{sub 4} as reducing agent and cyclodextrins as stabilizers. Long-term stability of AgNP colloids in equilibrium conditions showed no marked differences between CD types. Transmission electron microscopy and quantitative image analysis revealed only marginal differences in particle sizes for CD-AgNP, although statistically significant. CD-AgNP colloids showed dispersed particles with average diameters of 7.3 ± 2.2, 6.3 ± 2.9 and 4.9 ± 1.9 nm for α-, β- and γ-CD, respectively, and with similar ζ-potentials about −25 to −30 mV. AgNP without CD showed bigger and aggregated particles of 15.0 ± 2.0 nm with lower ζ-potentials of about −40 mV. When subjected to centrifugal forces, i.e. non-equilibrium conditions, γ-CD was markedly more efficient than α- and β-CD in stabilizing the colloids. Drying patterns of colloid droplets showed a typical self-pinned coffee ring for all but the colloid stabilized by γ-CD, which showed a pattern resulting from a dominant Gibbs–Marangoni flow inside the drying droplet. Calculations using the Derjaguin, Landau, Verwey and Overbeek (DLVO) theory supported the stabilizing effect of CD in equilibrium conditions; it however did not provide clues for the superior stabilization by γ-CD in conditions of hydrodynamic stress.

Silver nanoparticle colloids with γ-cyclodextrin: enhanced stability and Gibbs–Marangoni flow

International Nuclear Information System (INIS)

Amiri, Setareh; Duroux, Laurent; Larsen, Kim Lambertsen

2015-01-01

Although cyclodextrins (CD) are effective stabilizers for metal nanoparticle colloids, differences between α-, β- and γ-CD in stabilizing such colloids have not been previously reported. In this study, silver nanoparticles (AgNP) were synthesized using NaBH 4 as reducing agent and cyclodextrins as stabilizers. Long-term stability of AgNP colloids in equilibrium conditions showed no marked differences between CD types. Transmission electron microscopy and quantitative image analysis revealed only marginal differences in particle sizes for CD-AgNP, although statistically significant. CD-AgNP colloids showed dispersed particles with average diameters of 7.3 ± 2.2, 6.3 ± 2.9 and 4.9 ± 1.9 nm for α-, β- and γ-CD, respectively, and with similar ζ-potentials about −25 to −30 mV. AgNP without CD showed bigger and aggregated particles of 15.0 ± 2.0 nm with lower ζ-potentials of about −40 mV. When subjected to centrifugal forces, i.e. non-equilibrium conditions, γ-CD was markedly more efficient than α- and β-CD in stabilizing the colloids. Drying patterns of colloid droplets showed a typical self-pinned coffee ring for all but the colloid stabilized by γ-CD, which showed a pattern resulting from a dominant Gibbs–Marangoni flow inside the drying droplet. Calculations using the Derjaguin, Landau, Verwey and Overbeek (DLVO) theory supported the stabilizing effect of CD in equilibrium conditions; it however did not provide clues for the superior stabilization by γ-CD in conditions of hydrodynamic stress

Capillary waves with surface viscosity

Science.gov (United States)

Shen, Li; Denner, Fabian; Morgan, Neal; van Wachem, Berend; Dini, Daniele

2017-11-01

Experiments over the last 50 years have suggested a correlation between the surface (shear) viscosity and the stability of a foam or emulsion. With recent techniques allowing more accurate measurements of the elusive surface viscosity, we examine this link theoretically using small-amplitude capillary waves in the presence of the Marangoni effect and surface viscosity modelled via the Boussinesq-Scriven model. The surface viscosity effect is found to contribute a damping effect on the amplitude of the capillary wave with subtle differences to the effect of the convective-diffusive Marangoni transport. The general wave dispersion is augmented to take into account the Marangoni and surface viscosity effects, and a first-order correction to the critical damping wavelength is derived. The authors acknowledge the financial support of the Shell University Technology Centre for fuels and lubricants.

PIV study of non-Marangoni surface flows in thin liquid films induced by single- and multi-point thermodes

Science.gov (United States)

Cui, Nai-Yi; Wang, Song-Po

2018-03-01

The non-Marangoni directional flows, which can occur in only very thin liquid films, have been studied using particle image velocimetry techniques. Single- and multi-point thermodes have been used in this study for generating the flows. The results show that the direction of these flows is governed by the variation trend of the thickness of the film and the shape of the temperature profile. A hot thermode always drives a thick-to-thin flow, whereas a cold thermode always drives a flow in the opposite direction. Increasing the temperature difference between the thermode and the ambience, or decreasing the thickness of the liquid film, can accelerate the flow speed. However, the flow speed cannot exceed an upper limit. When more than one thermode was used, different flow patterns, including thick-to-thin streams driven by hot thermodes and thin-to-thick streams driven by cold thermodes, could be formed. The experimental results strongly suggest that these flows were not driven by thermo-capillary forces but by a newly proposed thermo-dynamic mechanism.

Use of Resolving Equation to Define the Lower Critical Reynolds Number

Directory of Open Access Journals (Sweden)

Alexander A. Solovyev

2014-09-01

Full Text Available Although the issue of streams with non-crossing trajectories of particle motions ranging from chaotic, random with irregular current lines, has been given a lot of attention, it still remains unresolved. The study features a relevant issue for hydromechanics, which is precise values determination of the Lower Critical Reynolds Number. It is suggested to put forward an updated approach to the use of energetic analysis for analytical calculation of the Reynolds Resolving Equation. The assessment of transition to mean motion from pulsation to the direction of laminar flows was fulfilled.

Assessment of the critical neutron number for internal break-even in explosion-induced thermonuclear fusion

International Nuclear Information System (INIS)

Kaliski, S.

1979-01-01

An analysis is performed of the systems of an explosion-induced thermonuclear microfusion from the angle of attaining an internal break-even. A critical-state meter is defined, i.e. the critical neutron yield Nsub(cr) as the most convenient for characterizing the experimental setups. It is demonstrated that in a number of designed systems of an explosion-induced microfusion, Nsub(cr) is attained. In the experiments actually carried out the N-yield efficiency is of about three orders of magnitude. (author)

Generation of transverse waves in a liquid layer with insoluble surfactant subjected to temperature gradient

Energy Technology Data Exchange (ETDEWEB)

Mikishev, Alexander B; Friedman, Barry A [Department of Physics, Sam Houston State University, Huntsville, TX 77341 (United States); Nepomnyashchy, Alexander A, E-mail: amik@shsu.edu, E-mail: phy_baf@shsu.edu, E-mail: nepom@technion.ac.il [Department of Mathematics, Technion—Israel Institute of Technology, Haifa 32000 (Israel)

2016-12-15

The formation of Faraday waves (FWs) at the surfactant-covered free surface of a vertically vibrated liquid layer is considered. The layer is subjected to a vertical temperature gradient. The surfactant is insoluble. Linear stability analysis and the Floquet method are used for disturbances with arbitrary wave numbers to find the regions of critical vibration amplitude where FWs are generated. The problem is considered for the semi-infinite liquid layer, as well as for the layer of a finite depth. It is shown numerically, that in the semi-infinite case the critical tongue of a neutral stability curve corresponding to the lowest value of the forcing amplitude is related to the subharmonic instability mode. It changes to the harmonic one in the case of finite depth. The influence of thermocapillary Marangoni number on the critical amplitude of FWs is studied. The growth of that number stabilizes the system, however, this effect is very weak. (paper)

Fragmented metastable states exist in an attractive bose-einstein condensate for atom numbers well above the critical number of the Gross-Pitaevskii theory.

Science.gov (United States)

Cederbaum, Lorenz S; Streltsov, Alexej I; Alon, Ofir E

2008-02-01

It is well known that attractive condensates do not posses a stable ground state in three dimensions. The widely used Gross-Pitaevskii theory predicts the existence of metastable states up to some critical number N(cr)(GP) of atoms. It is demonstrated here that fragmented metastable states exist for atom numbers well above N(cr)(GP). The fragments are strongly overlapping in space. The results are obtained and analyzed analytically as well as numerically. The implications are discussed.

Alecto, criticality experiment on a plutonium solution. Experimental results. Vessel number 1 (φ = 324 mm)

International Nuclear Information System (INIS)

Bruna, J.; Brunet, J.F.; Caizergues, R.; Clouet D'orval, C.; Kremser, J.; Leclerc, J.; Verriere, P.

1963-01-01

ALECTO is a critical experiment intended for the neutronic study of homogeneous aqueous multiplying media. It essentially consists of a cylindrical tank, reflected or not, where can be made critical a solution of fissionable material fed into the tank from a geometrically subcritical storage. The studies effected on this assembly concern on one hand the determination of critical masses, on the other hand the nuclear parameters used in neutron calculations. The container tested in the first series of experiments hereby described is a cylindrical tank, 324 mm diameter with a convex bottom, water reflected on the sides and on the inferior part. The minimum critical mass of this tank was determined and was found to be: M cmin = 845 ± 7 g. The decay constant of prompt neutrons as a function of reactivity was determined by the pulsed neutron technique. At the critical state, it was found to be: α c = 73 ± 6 s -1 . Furthermore, from the study of this tank, were derived a number of safety regulations for plutonium solutions. (authors) [fr

Linear temporal and spatio-temporal stability analysis of a binary liquid film flowing down an inclined uniformly heated plate

Science.gov (United States)

Hu, Jun; Hadid, Hamda Ben; Henry, Daniel; Mojtabi, Abdelkader

Temporal and spatio-temporal instabilities of binary liquid films flowing down an inclined uniformly heated plate with Soret effect are investigated by using the Chebyshev collocation method to solve the full system of linear stability equations. Seven dimensionless parameters, i.e. the Kapitza, Galileo, Prandtl, Lewis, Soret, Marangoni, and Biot numbers (Ka, G, Pr, L, ) are used to control the flow system. In the case of pure spanwise perturbations, thermocapillary S- and P-modes are obtained. It is found that the most dangerous modes are stationary for positive Soret numbers (0), and oscillatory for =0 remains so for >0 and even merges with the long-wave S-mode. In the case of streamwise perturbations, a long-wave surface mode (H-mode) is also obtained. From the neutral curves, it is found that larger Soret numbers make the film flow more unstable as do larger Marangoni numbers. The increase of these parameters leads to the merging of the long-wave H- and S-modes, making the situation long-wave unstable for any Galileo number. It also strongly influences the short-wave P-mode which becomes the most critical for large enough Galileo numbers. Furthermore, from the boundary curves between absolute and convective instabilities (AI/CI) calculated for both the long-wave instability (S- and H-modes) and the short-wave instability (P-mode), it is shown that for small Galileo numbers the AI/CI boundary curves are determined by the long-wave instability, while for large Galileo numbers they are determined by the short-wave instability.

Number Sense on the Number Line

Science.gov (United States)

Woods, Dawn Marie; Ketterlin Geller, Leanne; Basaraba, Deni

2018-01-01

A strong foundation in early number concepts is critical for students' future success in mathematics. Research suggests that visual representations, like a number line, support students' development of number sense by helping them create a mental representation of the order and magnitude of numbers. In addition, explicitly sequencing instruction…

Heat transfer enhancement by additive in vertical falling film absorption of H2O/LiBr

International Nuclear Information System (INIS)

Cheng Wenlong; Houda, Kouichi; Chen Zeshao; Akisawa, Atsushi; Hu Peng; Kashiwagi, Takao

2004-01-01

The enhancement effects of additive on vertical falling film of water into aqueous lithium bromide (LiBr) were studied by an experimental method. Based on the Navier-Stokes equations of falling film absorption, a new dimensionless parameter, surface renewal number Rn, was introduced, and a semi-empirical equation of enhancement factor of additive was obtained. It was shown that the absorption Marangoni number Ma, the surface Marangoni number M aA , and the surface renewal number Rn enhance the heat transfer of absorption, however the adsorption number Π and the Reynolds number Re weaken the heat transfer of absorption. It was proved that the semi-empirical equation agreed well with the experimental results by introduction of the parameters related to surface tension characters presented by the authors into the equation

A computational study of droplet evaporation with fuel vapor jet ejection induced by localized heat sources

KAUST Repository

Sim, Jaeheon

2015-05-12

Droplet evaporation by a localized heat source under microgravity conditions was numerically investigated in an attempt to understand the mechanism of the fuel vapor jet ejection, which was observed experimentally during the flame spread through a droplet array. An Eulerian-Lagrangian method was implemented with a temperature-dependent surface tension model and a local phase change model in order to effectively capture the interfacial dynamics between liquid droplet and surrounding air. It was found that the surface tension gradient caused by the temperature variation within the droplet creates a thermo-capillary effect, known as the Marangoni effect, creating an internal flow circulation and outer shear flow which drives the fuel vapor into a tail jet. A parametric study demonstrated that the Marangoni effect is indeed significant at realistic droplet combustion conditions, resulting in a higher evaporation constant. A modified Marangoni number was derived in order to represent the surface force characteristics. The results at different pressure conditions indicated that the nonmonotonic response of the evaporation rate to pressure may also be attributed to the Marangoni effect.

Study by the Prandtl-Glauert method of compressibility effects and critical Mach number for ellipsoids of various aspect ratios and thickness ratios

Science.gov (United States)

Hess, Robert V; Gardner, Clifford S

1947-01-01

By using the Prandtl-Glauert method that is valid for three-dimensional flow problems, the value of the maximum incremental velocity for compressible flow about thin ellipsoids at zero angle of attack is calculated as a function of the Mach number for various aspect ratios and thickness ratios. The critical Mach numbers of the various ellipsoids are also determined. The results indicate an increase in critical Mach number with decrease in aspect ratio which is large enough to explain experimental results on low-aspect-ratio wings at zero lift.

Evaporative and Convective Instabilities for the Evaporation of a Binary Mixture in a Bilayer System

Science.gov (United States)

Guo, Weidong; Narayanan, Ranga

2006-11-01

Evaporative convection in binary mixtures arises in a variety of industrial processes, such as drying of paint and coating technology. There have been theories devoted to this problem either by assuming a passive vapor layer or by isolating the vapor fluid dynamics. Previous work on evaporative and convective instabilities in a single component bilayer system suggests that active vapor layers play a major role in determining the instability of the interface. We have investigated the evaporation convection in binary mixtures taking into account the fluid dynamics of both phases. The liquid mixture and its vapor are assumed to be confined between two horizontal plates with a base state of zero evaporation but with linear vertical temperature profile. When the vertical temperature gradient reaches a critical value, the evaporative instability, Rayleigh and Marangoni convection set in. The effects of vapor and liquid depth, various wave numbers and initial composition of the mixture on the evaporative and convective instability are determined. The physics of the instability are explained and detailed comparison is made between the Rayleigh, Marangoni and evaporative convection in pure component and those in binary mixtures.

Dynamics of a slowly evaporating solvent-polymer mixture with a deformable upper surface

KAUST Repository

Hennessy, M. G.

2014-06-17

This paper examines how surface deformations affect the stability of a slowly evaporating solvent-polymer mixture. The destabilizing effect of surface-tension variations arising from evaporation-induced concentration gradients and the counteracting influence of mean gravity and surface tension are incorporated into the mathematical model. A linear stability analysis that takes advantage of the separation between the characteristic time scales of the slowly evolving base state and the perturbations is carried out in combination with numerical solutions of the linearized system. It is shown that the onset of instability can occur for Marangoni numbers that are much lower than the critical value for a non-deformable surface. Moreover, two types of Marangoni instabilities appear in the system: one is associated with the traditional stationary instability, and the other is an oscillatory instability that is not present for a non-deformable liquid surface. A region of the parameter space where the oscillatory instability dominates is identified and used to formulate appropriate conditions for future experiments. © 2014 The authors 2014. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved.

Dynamics of a slowly evaporating solvent-polymer mixture with a deformable upper surface

KAUST Repository

Hennessy, M. G.; Munch, A.

2014-01-01

This paper examines how surface deformations affect the stability of a slowly evaporating solvent-polymer mixture. The destabilizing effect of surface-tension variations arising from evaporation-induced concentration gradients and the counteracting influence of mean gravity and surface tension are incorporated into the mathematical model. A linear stability analysis that takes advantage of the separation between the characteristic time scales of the slowly evolving base state and the perturbations is carried out in combination with numerical solutions of the linearized system. It is shown that the onset of instability can occur for Marangoni numbers that are much lower than the critical value for a non-deformable surface. Moreover, two types of Marangoni instabilities appear in the system: one is associated with the traditional stationary instability, and the other is an oscillatory instability that is not present for a non-deformable liquid surface. A region of the parameter space where the oscillatory instability dominates is identified and used to formulate appropriate conditions for future experiments. © 2014 The authors 2014. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved.

Mechanisms of dynamic wetting failure in the presence of soluble surfactants

Science.gov (United States)

Kumar, Satish; Liu, Chen-Yu; Carvalho, Marcio S.

2017-11-01

A hydrodynamic model and flow visualization experiments are used to understand the mechanisms through which soluble surfactants can influence the onset of dynamic wetting failure. In the model, a Newtonian liquid displaces air in a rectangular channel in the absence of inertia. A Navier-slip boundary condition and constant contact angle are used to describe the dynamic contact line, and surfactants are allowed to adsorb to the interface and moving channel wall (substrate). The Galerkin finite element method is used to calculate steady states and identify the critical capillary number Cacrit at which wetting failure occurs. It is found that surfactant solubility weakens the influence of Marangoni stresses, which tend to promote the onset of wetting failure. The experiments indicate that Cacrit increases with surfactant concentration. For the more viscous solutions used, this behaviour can largely be explained by accounting for changes to the mean surface tension and static contact angle produced by surfactants. For the lowest-viscosity solution used, comparison between the model predictions and experimental observations suggests that other surfactant-induced phenomena such as Marangoni stresses may play a more important role.

Study on the Instability of Two-Phase Flow in the Heat-Absorbing Tube of Trough Solar Collector

Directory of Open Access Journals (Sweden)

Ying Zhang

2017-01-01

Full Text Available The Marangoni effect and Rayleigh-Benard effect in the two-phase region of solar trough heat-absorbing tube are simulated by FTM (front tracking method. Considering the Marangoni effect alone, although surface tension gradient and surface tension affect the interface wave, the two effects have different characteristics. The surface tension gradient caused by the temperature gradient is one of the factors that swing the interface. The amplitude attenuation of the interface wave decreases with the increase of the Marangoni number (Ma. In general, the surface tension gradient enhances the convection opposite to the temperature gradient. Under the gravity field, the Rayleigh-Benard effect influences the development of the vortex structure in the flow field, which in turn affects the velocity gradient near the interface to influence the evolution of the interface fluctuation. In a small Rayleigh number (Ra, the buoyancy convection reduces the velocity gradient, thus suppressing the evolution of the interfacial wave. In the range of Ra  4.0E4, the situation is just the opposite. The larger the Ra is, the stronger the promoting effect is.

Hydrodynamic stability of thermoviscous liquid film inside a rotating horizontal cylinder: Heating and cooling effects

Science.gov (United States)

Kumawat, Tara Chand; Tiwari, Naveen

2018-03-01

Steady two-dimensional solutions and their stability analysis are presented for thin film of a thermoviscous liquid flowing inside a cylinder rotating about its horizontal axis. The inner surface of the cylinder is either uniformly hotter or colder than the enveloping air. The mass, momentum, and energy equations are simplified using thin-film approximation. The analytically obtained film thickness evolution equation consists of various dimensionless parameters such as gravitational number, Bond number, Biot number, thermoviscosity number, and Marangoni number. The viscosity of the liquid is considered as an exponential function of temperature. The viscosity increases (decreases) within the film thickness away from the inner surface of the cylinder when the surface is uniformly hotter (colder) than the atmosphere. For hotter (colder) surface, the film thickness on the rising side decreases (increases) when convective heat transfer at the free surface is increased. The surface tension gradient at the free surface generates Marangoni stress that has a destabilizing (stabilizing) effect on the thin film flow in the case of a hotter (colder) cylinder. The thermoviscosity number stabilizes (destabilizes) the flow on a heating (cooling) surface and this effect increases with an increase in the heat transfer at the free surface. For a hotter surface and in the presence of Marangoni stress, the convective heat transfer at the interface has the destabilizing effect for small values of the Biot number and assumes a stabilizing role for larger values. Non-linear simulations show consistency with the linear stability analysis.

Critical masses for the even-neutron-numbered transuranium actinides

International Nuclear Information System (INIS)

Westfall, R.M.

1981-01-01

As part of a standards effort of the American Nuclear Society to establish subcritical mass limits for the transuranium actinides, critical masses were calculated for seven actinides, critical masses were calculated for seven actinide elements in bare, water-reflected, and steel-reflected metal systems. For the nuclides /sup 242/Pu and /sup 241/Am, values obtained with ENDF/B-V cross-section data were in much better agreement with values inferred from experimental measurement than were initial values calculated with ENDF/B-IV data. A brief description of the analytical methods employed is followed by a presentation of the results. 10 refs

Critical fluctuations of the number of neutrons in a reactor

International Nuclear Information System (INIS)

Ryazanov, V.V.; Lakoza, E.L.; Sysoev, V.M.

1995-01-01

The nuclear chain reaction is the most important physical process in a reactor. The theory of nuclear chain reaction fluctuations (neutron noise), developed in and other studies, has given results that are important for reactor physics and reactor practice (correlation analysis of neutron noise for measurement of the physical characteristics and reactor monitoring, stability of the critical state, etc.). Here we propose to study these problems by applying the methods of continuous phase transitions and synergetics and using the analogy with chemical chain reactions and the general laws of critical phenomena. The optimal reactor operating conditions are critical. To predict how a critical reactor will behave it is necessary to reveal those features of the neutron laws that are universal in some way, i.e., do not depend on the details of the individual acts of neutron motion and transformation that occur in reactors of different types. The similarity between chemical and nuclear chain reactions was noted long ago. Consequently, a universal theory of continuous phase transition was developed for systems of diverse physical nature

Surfactants non-monotonically modify the onset of Faraday waves

Science.gov (United States)

Strickland, Stephen; Shearer, Michael; Daniels, Karen

2017-11-01

When a water-filled container is vertically vibrated, subharmonic Faraday waves emerge once the driving from the vibrations exceeds viscous dissipation. In the presence of an insoluble surfactant, a viscous boundary layer forms at the contaminated surface to balance the Marangoni and Boussinesq stresses. For linear gravity-capillary waves in an undriven fluid, the surfactant-induced boundary layer increases the amount of viscous dissipation. In our analysis and experiments, we consider whether similar effects occur for nonlinear Faraday (gravity-capillary) waves. Assuming a finite-depth, infinite-breadth, low-viscosity fluid, we derive an analytic expression for the onset acceleration up to second order in ɛ =√{ 1 / Re } . This expression allows us to include fluid depth and driving frequency as parameters, in addition to the Marangoni and Boussinesq numbers. For millimetric fluid depths and driving frequencies of 30 to 120 Hz, our analysis recovers prior numerical results and agrees with our measurements of NBD-PC surfactant on DI water. In both case, the onset acceleration increases non-monotonically as a function of Marangoni and Boussinesq numbers. For shallower systems, our model predicts that surfactants could decrease the onset acceleration. DMS-0968258.

A critical number of workers in a honeybee colony triggers investment in reproduction.

Science.gov (United States)

Smith, Michael L; Ostwald, Madeleine M; Loftus, J Carter; Seeley, Thomas D

2014-10-01

Social insect colonies, like individual organisms, must decide as they develop how to allocate optimally their resources among survival, growth, and reproduction. Only when colonies reach a certain state do they switch from investing purely in survival and growth to investing also in reproduction. But how do worker bees within a colony detect that their colony has reached the state where it is adaptive to begin investing in reproduction? Previous work has shown that larger honeybee colonies invest more in reproduction (i.e., the production of drones and queens), however, the term 'larger' encompasses multiple colony parameters including number of adult workers, size of the nest, amount of brood, and size of the honey stores. These colony parameters were independently increased in this study to test which one(s) would increase a colony's investment in reproduction via males. This was assayed by measuring the construction of drone comb, the special type of comb in which drones are reared. Only an increase in the number of workers stimulated construction of drone comb. Colonies with over 4,000 workers began building drone comb, independent of the other colony parameters. These results show that attaining a critical number of workers is the key parameter for honeybee colonies to start to shift resources towards reproduction. These findings are relevant to other social systems in which a group's members must adjust their behavior as a function of the group's size.

A critical number of workers in a honeybee colony triggers investment in reproduction

Science.gov (United States)

Smith, Michael L.; Ostwald, Madeleine M.; Loftus, J. Carter; Seeley, Thomas D.

2014-10-01

Social insect colonies, like individual organisms, must decide as they develop how to allocate optimally their resources among survival, growth, and reproduction. Only when colonies reach a certain state do they switch from investing purely in survival and growth to investing also in reproduction. But how do worker bees within a colony detect that their colony has reached the state where it is adaptive to begin investing in reproduction? Previous work has shown that larger honeybee colonies invest more in reproduction (i.e., the production of drones and queens), however, the term `larger' encompasses multiple colony parameters including number of adult workers, size of the nest, amount of brood, and size of the honey stores. These colony parameters were independently increased in this study to test which one(s) would increase a colony's investment in reproduction via males. This was assayed by measuring the construction of drone comb, the special type of comb in which drones are reared. Only an increase in the number of workers stimulated construction of drone comb. Colonies with over 4,000 workers began building drone comb, independent of the other colony parameters. These results show that attaining a critical number of workers is the key parameter for honeybee colonies to start to shift resources towards reproduction. These findings are relevant to other social systems in which a group's members must adjust their behavior as a function of the group's size.

Experiment on smooth, circular cylinders in cross-flow in the critical Reynolds number regime

Science.gov (United States)

Miau, J. J.; Tsai, H. W.; Lin, Y. J.; Tu, J. K.; Fang, C. H.; Chen, M. C.

2011-10-01

Experiments were conducted for 2D circular cylinders at Reynolds numbers in the range of 1.73 × 105-5.86 × 105. In the experiment, two circular cylinder models made of acrylic and stainless steel, respectively, were employed, which have similar dimensions but different surface roughness. Particular attention was paid to the unsteady flow behaviors inferred by the signals obtained from the pressure taps on the cylinder models and by a hot-wire probe in the near-wake region. At Reynolds numbers pertaining to the initial transition from the subcritical to the critical regimes, pronounced pressure fluctuations were measured on the surfaces of both cylinder models, which were attributed to the excursion of unsteady flow separation over a large circumferential region. At the Reynolds numbers almost reaching the one-bubble state, it was noted that the development of separation bubble might switch from one side to the other with time. Wavelet analysis of the pressure signals measured simultaneously at θ = ±90° further revealed that when no separation bubble was developed, the instantaneous vortex-shedding frequencies could be clearly resolved, about 0.2, in terms of the Strouhal number. The results of oil-film flow visualization on the stainless steel cylinder of the one-bubble and two-bubble states showed that the flow reattachment region downstream of a separation bubble appeared not uniform along the span of the model. Thus, the three dimensionality was quite evident.

Visceral adipose inflammation in obesity is associated with critical alterations in tregulatory cell numbers.

Directory of Open Access Journals (Sweden)

Jeffrey Deiuliis

2011-01-01

Full Text Available The development of insulin resistance (IR in mouse models of obesity and type 2 diabetes mellitus (DM is characterized by progressive accumulation of inflammatory macrophages and subpopulations of T cells in the visceral adipose. Regulatory T cells (Tregs may play a critical role in modulating tissue inflammation via their interactions with both adaptive and innate immune mechanisms. We hypothesized that an imbalance in Tregs is a critical determinant of adipose inflammation and investigated the role of Tregs in IR/obesity through coordinated studies in mice and humans.Foxp3-green fluorescent protein (GFP "knock-in" mice were randomized to a high-fat diet intervention for a duration of 12 weeks to induce DIO/IR. Morbidly obese humans without overt type 2 DM (n = 13 and lean controls (n = 7 were recruited prospectively for assessment of visceral adipose inflammation. DIO resulted in increased CD3(+CD4(+, and CD3(+CD8(+ cells in visceral adipose with a striking decrease in visceral adipose Tregs. Treg numbers in visceral adipose inversely correlated with CD11b(+CD11c(+ adipose tissue macrophages (ATMs. Splenic Treg numbers were increased with up-regulation of homing receptors CXCR3 and CCR7 and marker of activation CD44. In-vitro differentiation assays showed an inhibition of Treg differentiation in response to conditioned media from inflammatory macrophages. Human visceral adipose in morbid obesity was characterized by an increase in CD11c(+ ATMs and a decrease in foxp3 expression.Our experiments indicate that obesity in mice and humans results in adipose Treg depletion. These changes appear to occur via reduced local differentiation rather than impaired homing. Our findings implicate a role for Tregs as determinants of adipose inflammation.

Determination of critical nucleation number for a single nucleation amyloid-β aggregation model.

Science.gov (United States)

Ghosh, Preetam; Vaidya, Ashwin; Kumar, Amit; Rangachari, Vijayaraghavan

2016-03-01

Aggregates of amyloid-β (Aβ) peptide are known to be the key pathological agents in Alzheimer disease (AD). Aβ aggregates to form large, insoluble fibrils that deposit as senile plaques in AD brains. The process of aggregation is nucleation-dependent in which the formation of a nucleus is the rate-limiting step, and controls the physiochemical fate of the aggregates formed. Therefore, understanding the properties of nucleus and pre-nucleation events will be significant in reducing the existing knowledge-gap in AD pathogenesis. In this report, we have determined the plausible range of critical nucleation number (n(*)), the number of monomers associated within the nucleus for a homogenous aggregation model with single unique nucleation event, by two independent methods: A reduced-order stability analysis and ordinary differential equation based numerical analysis, supported by experimental biophysics. The results establish that the most likely range of n(*) is between 7 and 14 and within, this range, n(*) = 12 closely supports the experimental data. These numbers are in agreement with those previously reported, and importantly, the report establishes a new modeling framework using two independent approaches towards a convergent solution in modeling complex aggregation reactions. Our model also suggests that the formation of large protofibrils is dependent on the nature of n(*), further supporting the idea that pre-nucleation events are significant in controlling the fate of larger aggregates formed. This report has re-opened an old problem with a new perspective and holds promise towards revealing the molecular events in amyloid pathologies in the future. Copyright © 2015 Elsevier Inc. All rights reserved.

A Critical Shock Mach Number for Particle Acceleration in the Absence of Pre-existing Cosmic Rays: M = √5

NARCIS (Netherlands)

Vink, J.; Yamazaki, R.

2014-01-01

It is shown that, under some generic assumptions, shocks cannot accelerate particles unless the overall shock Mach number exceeds a critical value M > √5. The reason is that for M ≤ √5 the work done to compress the flow in a particle precursor requires more enthalpy flux than the system can sustain.

Functional, interactive and critical health literacy: Varying relationships with control over care and number of GP visits.

Science.gov (United States)

van der Heide, Iris; Heijmans, Monique; Schuit, A Jantine; Uiters, Ellen; Rademakers, Jany

2015-08-01

The aim of this study is to examine the extent to which functional, interactive and critical health literacy are associated with patients' perceived control over care and frequency of GP visits. Data from the Dutch 'National Panel of People with Chronic Illness or Disability' was used (N=2508). Health literacy was assessed by the Functional, Communicative and Critical Health Literacy measure. Perceived control over care was indicated by perceived ability to organize care, interact with providers and to perform self-care. By multivariate linear and logistic regression analyses, associations between health literacy and perceived control over care and subsequently frequency of GP visits were studied. Mainly interactive health literacy was associated with patients' perceived ability to organize care, interact with healthcare providers and perform self-care, whereas only functional health literacy was associated with number of GP visits. The results imply that some patients' may be less able to exert control over their care because of lower health literacy. Functional, interactive and critical health literacy vary in their relevance for patients' ability to exert control. Initiatives for strengthening patients' role in healthcare may be improved by paying attention to patients' health literacy, specifically functional and interactive health literacy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Charge-transport anisotropy in black phosphorus: critical dependence on the number of layers.

Science.gov (United States)

Banerjee, Swastika; Pati, Swapan K

2016-06-28

Phosphorene is a promising candidate for modern electronics because of the anisotropy associated with high electron-hole mobility. Additionally, superior mechanical flexibility allows the strain-engineering of various properties including the transport of charge carriers in phosphorene. In this work, we have shown the criticality of the number of layers to dictate the transport properties of black phosphorus. Trilayer black phosphorus (TBP) has been proposed as an excellent anisotropic material, based on the transport parameters using Boltzmann transport formalisms coupled with density functional theory. The mobilities of both the electron and the hole are found to be higher along the zigzag direction (∼10(4) cm(2) V(-1) s(-1) at 300 K) compared to the armchair direction (∼10(2) cm(2) V(-1) s(-1)), resulting in the intrinsic directional anisotropy. Application of strain leads to additional electron-hole anisotropy with 10(3) fold higher mobility for the electron compared to the hole. Critical strain for maximum anisotropic response has also been determined. Whether the transport anisotropy is due to the spatial or charge-carrier has been determined through analyses of the scattering process of electrons and holes, and their recombination as well as relaxation dynamics. In this context, we have derived two descriptors (S and F(k)), which are general enough for any 2D or quasi-2D systems. Information on the scattering involving purely the carrier states also helps to understand the layer-dependent photoluminescence and electron (hole) relaxation in black phosphorus. Finally, we justify trilayer black phosphorus (TBP) as the material of interest with excellent transport properties.

Critical sizes and critical characteristics of nanoclusters, nanostructures and nanomaterials

International Nuclear Information System (INIS)

Suzdalev, I.P.

2005-01-01

Full text: Critical sizes and characteristics of nanoclusters and nanostructures are introduced as the parameters of nanosystems and nanomaterials. The next critical characteristics are considered: atomic and electronic 'magic number', critical size of cluster nucleation, critical size of melting-freezing of cluster, critical size of quantum (laser) radiation, critical sizes for the single electron conductivity, critical energy and magnetic field for the magnetic tunneling, critical cluster sizes for the giant magnetic resistance, critical size of the first order magnetic phase transition. The critical characteristics are estimated by thermodynamic approaches, by Moessbauer spectroscopy, AFM, heat capacity, SQUID magnetometry and other technique, The influence of cluster-cluster interactions, cluster-matrix interactions and cluster defects on cluster atomic dynamics, cluster melting, cluster critical sizes, Curie or Neel points and the character of magnetic phase transitions were investigated. The applications of critical size and critical characteristic parameters for the nanomaterial characterization are considered

Morphology and Pattern Control of Diphenylalanine Self-Assembly via Evaporative Dewetting.

Science.gov (United States)

Chen, Jiarui; Qin, Shuyu; Wu, Xinglong; Chu, And Paul K

2016-01-26

Self-assembled peptide nanostructures have unique physical and biological properties and promising applications in electrical devices and functional molecular recognition. Although solution-based peptide molecules can self-assemble into different morphologies, it is challenging to control the self-assembly process. Herein, controllable self-assembly of diphenylalanine (FF) in an evaporative dewetting solution is reported. The fluid mechanical dimensionless numbers, namely Rayleigh, Marangoni, and capillary numbers, are introduced to control the interaction between the solution and FF molecules in the self-assembly process. The difference in the film thickness reflects the effects of Rayleigh and Marangoni convection, and the water vapor flow rate reveals the role of viscous fingering in the emergence of aligned FF flakes. By employing dewetting, various FF self-assembled patterns, like concentric and spokelike, and morphologies, like strips and hexagonal tubes/rods, can be produced, and there are no significant lattice structural changes in the FF nanostructures.

Criticality accident in uranium fuel processing plant. The estimation of the total number of fissions with related reactor physics parameters

International Nuclear Information System (INIS)

Nishina, Kojiro; Oyamatsu, Kazuhiro; Kondo, Shunsuke; Sekimoto, Hiroshi; Ishitani, Kazuki; Yamane, Yoshihiro; Miyoshi, Yoshinori

2000-01-01

This accident occurred when workers were pouring a uranium solution into a precipitation tank with handy operation against the established procedure and both the cylindrical diameter and the total mass exceeded the limited values. As a result, nuclear fission chain reactor in the solution reached not only a 'criticality' state continuing it independently but also an instantly forming criticality state exceed the criticality and increasing further nuclear fission number. The place occurring the accident at this time was not reactor but a place having not to form 'criticality' called by a processing process of uranium fuel. In such place, as because of relating to mechanism of chain reaction, it is required naturally for knowledge on the reactor physics, it is also necessary to understand chemical reaction in chemical process, and functions of tanks, valves and pumps mounted at the processes. For this purpose, some information on uranium concentration ratio, atomic density of nuclides largely affecting to chain reaction such as uranium, hydrogen, and so forth in the solution, shape, inner structure and size of container for the solution, and its temperature and total volume, were necessary for determining criticality volume of the accident uranium solution by using nuclear physics procedures. Here were described on estimation of energy emission in the JCO accident, estimation from analytical results on neutron and solution, calculation of various nuclear physics property estimation on the JCO precipitation tank at JAERI. (G.K.)

Mean flow produced by small-amplitude vibrations of a liquid bridge with its free surface covered with an insoluble surfactant

Science.gov (United States)

Carrión, Luis M.; Herrada, Miguel A.; Montanero, José M.; Vega, José M.

2017-09-01

As is well known, confined fluid systems subject to forced vibrations produce mean flows, called in this context streaming flows. These mean flows promote an overall mass transport in the fluid that has consequences in the transport of passive scalars and surfactants, when these are present in a fluid interface. Such transport causes surfactant concentration inhomogeneities that are to be counterbalanced by Marangoni elasticity. Therefore, the interaction of streaming flows and Marangoni convection is expected to produce new flow structures that are different from those resulting when only one of these effects is present. The present paper focuses on this interaction using the liquid bridge geometry as a paradigmatic system for the analysis. Such analysis is based on an appropriate post-processing of the results obtained via direct numerical simulation of the system for moderately small viscosity, a condition consistent with typical experiments of vibrated millimetric liquid bridges. It is seen that the flow patterns show a nonmonotone behavior as the Marangoni number is increased. In addition, the strength of the mean flow at the free surface exhibits two well-defined regimes as the forcing amplitude increases. These regimes show fairly universal power-law behaviors.

ASSOCIATION AMONG MATHEMATICAL CRITICAL THINKING SKILL, COMMUNICATION, AND CURIOSITY ATTITUDE AS THE IMPACT OF PROBLEM-BASED LEARNING AND COGNITIVE CONFLICT STRATEGY (PBLCCS) IN NUMBER THEORY COURSE

OpenAIRE

Zetriuslita Zetriuslita; Wahyudin Wahyudin; Jarnawi Afgani Dahlan

2018-01-01

This research aims to find out the association amongMathematical Critical Thinking (MCT) ability, Mathematical Communication, and Mathematical Curiosity Attitude (MCA) as the impact of applying Problem-Based Learning Cognitive Conflict Strategy(PBLCCS) in Number Theory course. The research method is correlative study. The instruments include a test for mathematical critical thinking skill and communication, and questionnaire to obtain the scores of mathematical curiosity attitude. The finding...

Radiation and nitrogen use at the leaf and canopy level by wheat and oilseed rape during the critical period for grain number definition

NARCIS (Netherlands)

Dreccer, M.F.; Schapendonk, A.H.C.M.; Oijen, van M.; Pot, C.S.; Rabbinge, R.

2000-01-01

During the critical period for grain number definition, the amount of biomass produced per unit absorbed radiation is more sensitive to nitrogen (N) supply in oilseed rape than in wheat, and reaches a higher value at high N. This response was investigated by combining experimental and modelling

Critical Chain Exercises

Science.gov (United States)

Doyle, John Kevin

2010-01-01

Critical Chains project management focuses on holding buffers at the project level vs. task level, and managing buffers as a project resource. A number of studies have shown that Critical Chain project management can significantly improve organizational schedule fidelity (i.e., improve the proportion of projects delivered on time) and reduce…

Domination criticality in product graphs

Directory of Open Access Journals (Sweden)

M.R. Chithra

2015-07-01

Full Text Available A connected dominating set is an important notion and has many applications in routing and management of networks. Graph products have turned out to be a good model of interconnection networks. This motivated us to study the Cartesian product of graphs G with connected domination number, γc(G=2,3 and characterize such graphs. Also, we characterize the k−γ-vertex (edge critical graphs and k−γc-vertex (edge critical graphs for k=2,3 where γ denotes the domination number of G. We also discuss the vertex criticality in grids.

Strategies in filtering in the number field sieve

NARCIS (Netherlands)

S.H. Cavallar

2000-01-01

textabstractA critical step when factoring large integers by the Number Field Sieve consists of finding dependencies in a huge sparse matrix over the field GF(2), using a Block Lanczos algorithm. Both size and weight (the number of non-zero elements) of the matrix critically affect the running time

The average number of critical rank-one approximations to a tensor

NARCIS (Netherlands)

Draisma, J.; Horobet, E.

2014-01-01

Motivated by the many potential applications of low-rank multi-way tensor approximations, we set out to count the rank-one tensors that are critical points of the distance function to a general tensor v. As this count depends on v, we average over v drawn from a Gaussian distribution, and find

A New Method to Detect and Correct the Critical Errors and Determine the Software-Reliability in Critical Software-System

International Nuclear Information System (INIS)

Krini, Ossmane; Börcsök, Josef

2012-01-01

In order to use electronic systems comprising of software and hardware components in safety related and high safety related applications, it is necessary to meet the Marginal risk numbers required by standards and legislative provisions. Existing processes and mathematical models are used to verify the risk numbers. On the hardware side, various accepted mathematical models, processes, and methods exist to provide the required proof. To this day, however, there are no closed models or mathematical procedures known that allow for a dependable prediction of software reliability. This work presents a method that makes a prognosis on the residual critical error number in software. Conventional models lack this ability and right now, there are no methods that forecast critical errors. The new method will show that an estimate of the residual error number of critical errors in software systems is possible by using a combination of prediction models, a ratio of critical errors, and the total error number. Subsequently, the critical expected value-function at any point in time can be derived from the new solution method, provided the detection rate has been calculated using an appropriate estimation method. Also, the presented method makes it possible to make an estimate on the critical failure rate. The approach is modelled on a real process and therefore describes two essential processes - detection and correction process.

On 4-critical t-perfect graphs

OpenAIRE

Benchetrit, Yohann

2016-01-01

It is an open question whether the chromatic number of $t$-perfect graphs is bounded by a constant. The largest known value for this parameter is 4, and the only example of a 4-critical $t$-perfect graph, due to Laurent and Seymour, is the complement of the line graph of the prism $\\Pi$ (a graph is 4-critical if it has chromatic number 4 and all its proper induced subgraphs are 3-colorable). In this paper, we show a new example of a 4-critical $t$-perfect graph: the complement of the line gra...

Viscous effects in liquid encapsulated liquid bridges

International Nuclear Information System (INIS)

Johnson, Duane T.

2002-01-01

An analytical derivation of the surface deflections and the streamfunctions for the flow inside a liquid encapsulated liquid bridge has been derived using an asymptotic expansion about a small capillary number. The model assumes an initially flat and cylindrical interface under the assumption that the densities of both fluids are equal. To simplify the analysis, the top and bottom walls are assumed to be stress-free and the Reynolds number is assumed to be negligible. Flow is generated either by a moving outer wall (shear-driven flow) or by applying a temperature difference across the top and bottom walls (Marangoni-driven flow). The resulting equations show that for the shear-driven flow, as the viscosity ratio increases, the surface deflections increase monotonically. For the Marangoni-driven flow there exist values of the viscosity ratio where the surface deflections reach a minimum and then switch signs. This investigation shows that it may be possible in more realistic systems to use an outer encapsulating liquid of the proper viscosity ratio to stabilize the liquid-liquid interface during float zone crystal growth

Study of the Internal Flow and Evaporation Characteristic Inside a Water Droplet on a Vertical Vibrating Hydrophobic Surface

Energy Technology Data Exchange (ETDEWEB)

Park, Chang-Seok; Lim, Hee-Chang [Pusan Nat’l Univ., Busan (Korea, Republic of)

2017-01-15

Thermal Marangoni flow has been observed inside droplets on heated surfaces, finally resulting in a coffee stain effect. This study aims to visualize and control the thermal Marangoni flow by employing periodic vertical vibration. The variations in the contact angle and internal volume of the droplet as it evaporates is observed by using a combination of continuous light and a still camera. With regard to the internal velocity, the particle image velocimetry system is applied to visualize the internal thermal Marangoni flow. In order to estimate the internal temperature gradient and surface tension on the surface of a droplet, the theoretical model based on the conduction and convection theory of heat transfer is applied. Thus, the internal velocity increases with an increase in plate temperature. The flow directions of the Marangoni and gravitational flows are opposite, and hence, it may be possible to control the coffee stain effect.

A review of aqueous foam in microscale.

Science.gov (United States)

Anazadehsayed, Abdolhamid; Rezaee, Nastaran; Naser, Jamal; Nguyen, Anh V

2018-06-01

In recent years, significant progress has been achieved in the study of aqueous foams. Having said this, a better understanding of foam physics requires a deeper and profound study of foam elements. This paper reviews the studies in the microscale of aqueous foams. The elements of aqueous foams are interior Plateau borders, exterior Plateau borders, nodes, and films. Furthermore, these elements' contribution to the drainage of foam and hydraulic resistance are studied. The Marangoni phenomena that can happen in aqueous foams are listed as Marangoni recirculation in the transition region, Marangoni-driven flow from Plateau border towards the film in the foam fractionation process, and Marangoni flow caused by exposure of foam containing photosurfactants under UV. Then, the flow analysis of combined elements of foam such as PB-film along with Marangoni flow and PB-node are studied. Next, we contrast the behavior of foams in different conditions. These various conditions can be perturbation in the foam structure caused by injected water droplets or waves or using a non-Newtonian fluid to make the foam. Further review is about the effect of oil droplets and particles on the characteristics of foam such as drainage, stability and interfacial mobility. Copyright © 2018 Elsevier B.V. All rights reserved.

Criticality safety

International Nuclear Information System (INIS)

Walker, G.

1983-01-01

When a sufficient quantity of fissile material is brought together a self-sustaining neutron chain reaction will be started in it and will continue until some change occurs in the fissile material to stop the chain reaction. The quantity of fissile material required is the 'Critical Mass'. This is not a fixed quantity even for a given type of fissile material but varies between quite wide limits depending on a number of factors. In a nuclear reactor the critical mass of fissile material is assembled under well-defined condition to produce a controllable chain reaction. The same materials have to be handled outside the reactor in all stages of fuel element manufacture, storage, transport and irradiated fuel reprocessing. At any stage it is possible (at least in principle) to assemble a critical mass and thus initiate an accidental and uncontrollable chain reaction. Avoiding this is what criticality safety is all about. A system is just critical when the rate of production of neutrons balances the rate of loss either by escape or by absorption. The factors affecting criticality are, therefore, those which effect neutron production and loss. The principal ones are:- type of nuclide and enrichment (or isotopic composition), moderation, reflection, concentration (density), shape and interaction. Each factor is considered in detail. (author)

Unit Reynolds number, Mach number and pressure gradient effects on laminar-turbulent transition in two-dimensional boundary layers

Science.gov (United States)

Risius, Steffen; Costantini, Marco; Koch, Stefan; Hein, Stefan; Klein, Christian

2018-05-01

The influence of unit Reynolds number (Re_1=17.5× 106-80× 106 {m}^{-1}), Mach number (M= 0.35-0.77) and incompressible shape factor (H_{12} = 2.50-2.66) on laminar-turbulent boundary layer transition was systematically investigated in the Cryogenic Ludwieg-Tube Göttingen (DNW-KRG). For this investigation the existing two-dimensional wind tunnel model, PaLASTra, which offers a quasi-uniform streamwise pressure gradient, was modified to reduce the size of the flow separation region at its trailing edge. The streamwise temperature distribution and the location of laminar-turbulent transition were measured by means of temperature-sensitive paint (TSP) with a higher accuracy than attained in earlier measurements. It was found that for the modified PaLASTra model the transition Reynolds number (Re_{ {tr}}) exhibits a linear dependence on the pressure gradient, characterized by H_{12}. Due to this linear relation it was possible to quantify the so-called `unit Reynolds number effect', which is an increase of Re_{ {tr}} with Re_1. By a systematic variation of M, Re_1 and H_{12} in combination with a spectral analysis of freestream disturbances, a stabilizing effect of compressibility on boundary layer transition, as predicted by linear stability theory, was detected (`Mach number effect'). Furthermore, two expressions were derived which can be used to calculate the transition Reynolds number as a function of the amplitude of total pressure fluctuations, Re_1 and H_{12}. To determine critical N-factors, the measured transition locations were correlated with amplification rates, calculated by incompressible and compressible linear stability theory. By taking into account the spectral level of total pressure fluctuations at the frequency of the most amplified Tollmien-Schlichting wave at transition location, the scatter in the determined critical N-factors was reduced. Furthermore, the receptivity coefficients dependence on incidence angle of acoustic waves was used to

Critical success factors for competitiveness of construction companies: A critical review

Science.gov (United States)

Hanafi, Abdul Ghafur; Nawi, Mohd Nasrun Mohd

2016-08-01

Making progress basically, a fundamental issue for the construction companies to get by in a highly competitive industry. From time to time, industry players are facing stiff and tough competition due to large number of players, whether existing or new players involved from various background and track record. Furthermore, the large numbers of component deciding the competitiveness of contractors, whose organization structures and governance have turned out to be more muddled. Different construction companies have their own unique criteria which may differ from one to another. The enormous amount of issues needs to bring down to manageable numbers so that measures can be identified and scrutinized to enhance competitiveness. This paper discusses the result from the critical investigation from past studies in the Asian countries, namely China, India, Thailand, Singapore and Malaysia. Several fundamental factors have been identified as CSFs in construction companies in respective country. Also highlighted a critical survey based upon various literatures written on this subject where critical success factors (CSFs) as a yardstick to gauge the relationship among CSFs in various construction companies in the Asian region. Far reaching estimation of an organization's performance and resulting input to its supervision is crucial for business change. Estimation additionally empowers organizations to be contrasted from one another on the premise of institutionalized data, permitting best practices to be distinguished and connected more widely. Different countries have their own set of critical success factors (CSFs) which may differ in term of priority and at the same time share common elements of success factor in accomplishment as a construction companies. The study, which is exploratory in nature, embraced the content investigation and inductive technique to accomplish its objectives.

Criticality experiment for No.2 core of DF-VI fast neutron criticality facility

International Nuclear Information System (INIS)

Yang Lijun; Liu Zhenhua; Yan Fengwen; Luo Zhiwen; Chu Chun; Liang Shuhong

2007-01-01

At the completion of the DF-VI fast neutron criticality facility, its core changed, and it was restarted and a series of experiments and measurements were made. According to the data from 29 criticality experiments, the criticality element number and mass were calculated, the control rod reactivity worth were measured by period method and rod compensate method, reactivity worth of safety rod and safety block were measured using reactivity instrument; the reactivity worth of outer elements and radial distribution of elements were measured too. Based on all the measurements mentioned above, safety operation parameters for core 2 in DF-VI fast neutron criticality facility were conformed. (authors)

Evaluation of some self-sustained capillary effects taking place in slag at the interface during desulphurization process

International Nuclear Information System (INIS)

Nita, Petre Stelian

2008-01-01

In the paper are presented and analyzed some specific problems of instability and of Marangoni convection in desulphurizing slags at 1873.15 K, due to the presence of sulphur, during liquid steel treatments. Starting from the quantity sulphide capacity, a limit of sulphur solubility in a homogeneous liquid slag is established. The thermodynamic effect of sulphur in the slag is evaluated using an enthalpy of interaction of sulphur containing the balance of the partial molar enthalpy of mixing for CaS and CaO. The sulphur effect in slag, on the enhancement of the mass transfer coefficient through the interface is evaluated based on the expression of the concentration coefficient of the surface tension related to the mole fraction, the solutal Marangoni number and of the sulphur mass transfer enhancement parameters. It is concluded that during desulphurization, self-sustained capillary effects are present in slags

Analysis of android random number generator

OpenAIRE

Sarıtaş, Serkan

2013-01-01

Ankara : The Department of Computer Engineering and the Graduate School of Engineering and Science of Bilkent University, 2013. Thesis (Master's) -- Bilkent University, 2013. Includes bibliographical references leaves 61-65. Randomness is a crucial resource for cryptography, and random number generators are critical building blocks of almost all cryptographic systems. Therefore, random number generation is one of the key parts of secure communication. Random number generatio...

Low energy fermion number violation

International Nuclear Information System (INIS)

Peccei, R.D.

1989-01-01

After a brief aside on charge quantization in the standard electroweak theory, I concentrate on various aspects of anomaly induced fermion number violation in the standard model. A critical analysis of the role of sphalerons for the universe's baryon asymmetry is presented and the importance of calculating directly fermion number violating Green's functions is stressed. A physical interpretation of the recent observation of Ringwald, that coherent effects in the electroweak theory lead to catastrophic fermion number violation at 100 TeV, is discussed. Possible quantum effects which might spoil this semi-classical picture are examined

Critical thinking in clinical nurse education: application of Paul's model of critical thinking.

Science.gov (United States)

Andrea Sullivan, E

2012-11-01

Nurse educators recognize that many nursing students have difficulty in making decisions in clinical practice. The ability to make effective, informed decisions in clinical practice requires that nursing students know and apply the processes of critical thinking. Critical thinking is a skill that develops over time and requires the conscious application of this process. There are a number of models in the nursing literature to assist students in the critical thinking process; however, these models tend to focus solely on decision making in hospital settings and are often complex to actualize. In this paper, Paul's Model of Critical Thinking is examined for its application to nursing education. I will demonstrate how the model can be used by clinical nurse educators to assist students to develop critical thinking skills in all health care settings in a way that makes critical thinking skills accessible to students. Copyright © 2012 Elsevier Ltd. All rights reserved.

On the diameter of dot-critical graphs

Directory of Open Access Journals (Sweden)

Doost Ali Mojdeh

2009-01-01

Full Text Available A graph G is \\(k\\-dot-critical (totaly \\(k\\-dot-critical if \\(G\\ is dot-critical (totaly dot-critical and the domination number is \\(k\\. In the paper [T. Burtona, D. P. Sumner, Domination dot-critical graphs, Discrete Math, 306 (2006, 11-18] the following question is posed: What are the best bounds for the diameter of a \\(k\\-dot-critical graph and a totally \\(k\\-dot-critical graph \\(G\\ with no critical vertices for \\(k \\geq 4\\? We find the best bound for the diameter of a \\(k\\-dot-critical graph, where \\(k \\in\\{4,5,6\\}\\ and we give a family of \\(k\\-dot-critical graphs (with no critical vertices with sharp diameter \\(2k-3\\ for even \\(k \\geq 4\\.

Some types of parent number talk count more than others: relations between parents' input and children's cardinal-number knowledge.

Science.gov (United States)

Gunderson, Elizabeth A; Levine, Susan C

2011-09-01

Before they enter preschool, children vary greatly in their numerical and mathematical knowledge, and this knowledge predicts their achievement throughout elementary school (e.g. Duncan et al., 2007; Ginsburg & Russell, 1981). Therefore, it is critical that we look to the home environment for parental inputs that may lead to these early variations. Recent work has shown that the amount of number talk that parents engage in with their children is robustly related to a critical aspect of mathematical development - cardinal-number knowledge (e.g. knowing that the word 'three' refers to sets of three entities; Levine, Suriyakham, Rowe, Huttenlocher & Gunderson, 2010). The present study characterizes the different types of number talk that parents produce and investigates which types are most predictive of children's later cardinal-number knowledge. We find that parents' number talk involving counting or labeling sets of present, visible objects is related to children's later cardinal-number knowledge, whereas other types of parent number talk are not. In addition, number talk that refers to large sets of present objects (i.e. sets of size 4 to 10 that fall outside children's ability to track individual objects) is more robustly predictive of children's later cardinal-number knowledge than talk about smaller sets. The relation between parents' number talk about large sets of present objects and children's cardinal-number knowledge remains significant even when controlling for factors such as parents' socioeconomic status and other measures of parents' number and non-number talk. © 2011 Blackwell Publishing Ltd.

Instability of two-layer film flows due to the interacting effects of surfactants, inertia, and gravity

Science.gov (United States)

Kalogirou, Anna

2018-03-01

We consider a two-fluid shear flow where the interface between the two fluids is coated with an insoluble surfactant. An asymptotic model is derived in the thin-layer approximation, consisting of a set of nonlinear partial differential equations describing the evolution of the film and surfactant disturbances at the interface. The model includes important physical effects such as Marangoni forces (caused by the presence of surfactant), inertial forces arising in the thick fluid layer, as well as gravitational forces. The aim of this study is to investigate the effect of density stratification or gravity—represented through the Bond number Bo—on the flow stability and the interplay between the different (de)stabilisation mechanisms. It is found that gravity can either stabilise or destabilise the interface (depending on fluid properties) but not always as intuitively anticipated. Different traveling-wave branches are presented for varying Bo, and the destabilising mechanism associated with the Marangoni forces is discussed.

Evaluation of Saxton critical experiments

Energy Technology Data Exchange (ETDEWEB)

Joo, Hyung Kook; Noh, Jae Man; Jung, Hyung Guk; Kim, Young Il; Kim, Young Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1998-12-31

As a part of International Criticality Safety Benchmark Evaluation Project (ICSBEP), SAXTON critical experiments were reevaluated. The effects of k{sub eff} of the uncertainties in experiment parameters, fuel rod characterization, soluble boron, critical water level, core structure, {sup 241}Am and {sup 241}Pu isotope number densities, random pitch error, duplicated experiment, axial fuel position, model simplification, etc., were evaluated and added in benchmark-model k{sub eff}. In addition to detailed model, the simplified model for Saxton critical experiments was constructed by omitting the top, middle, and bottom grids and ignoring the fuel above water. 6 refs., 1 fig., 3 tabs. (Author)

Evaluation of Saxton critical experiments

Energy Technology Data Exchange (ETDEWEB)

Joo, Hyung Kook; Noh, Jae Man; Jung, Hyung Guk; Kim, Young Il; Kim, Young Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1997-12-31

As a part of International Criticality Safety Benchmark Evaluation Project (ICSBEP), SAXTON critical experiments were reevaluated. The effects of k{sub eff} of the uncertainties in experiment parameters, fuel rod characterization, soluble boron, critical water level, core structure, {sup 241}Am and {sup 241}Pu isotope number densities, random pitch error, duplicated experiment, axial fuel position, model simplification, etc., were evaluated and added in benchmark-model k{sub eff}. In addition to detailed model, the simplified model for Saxton critical experiments was constructed by omitting the top, middle, and bottom grids and ignoring the fuel above water. 6 refs., 1 fig., 3 tabs. (Author)

Critical Infrastructure Awareness Required by Civil Emergency Planning

NARCIS (Netherlands)

Luiijf, H.A.M.; Klaver, M.H.A.

2005-01-01

Modern societies are increasingly dependent on a set of critical products and services which comprise the Critical Infrastructure (CI). This makes Critical infrastructures increasingly important as a planning factor in case of emergencies. For that reason, we studied a number of emergencies and a

Life after critical illness: an overview.

Science.gov (United States)

Rattray, Janice

2014-03-01

To illustrate the potential physical and psychological problems faced by patients after an episode of critical illness, highlight some of the interventions that have been tested and identify areas for future research. Recovery from critical illness is an international problem and as an issue is likely to increase. For some, recovery from critical illness is prolonged, subject to physical and psychological problems that may negatively impact upon health-related quality of life. The literature accessed for this review includes the work of a number of key researchers in the field of critical care research. These were identified from a number of sources include (1) personal knowledge of the research field accumulated over the last decade and (2) using the search engine 'The Knowledge Network Scotland'. Fatigue and weakness are significant problems for critical care survivors and are common in patients who have been in ICU for more than one week. Psychological problems include anxiety, depression, post-traumatic stress, delirium and cognitive impairment. Prevalence of these problems is difficult to establish for a number of methodological reasons that include the use of self-report questionnaires, the number of different questionnaires used and the variation in administration and timing. Certain subgroups of ICU survivors especially those at the more severe end of the illness severity spectrum are more at risk and this has been demonstrated for both physical and psychological problems. Findings from international studies of a range of potential interventions are presented. However, establishing effectiveness for most of these still has to be empirically demonstrated. What seems clear is the need for a co-ordinated, multidisciplinary, designated recovery and rehabilitation pathway that begins as soon as the patient is admitted into an intensive care unit. © 2013 John Wiley & Sons Ltd.

Analysis of construction dynamic plan using fuzzy critical path method

Directory of Open Access Journals (Sweden)

Kurij Kazimir V.

2014-01-01

Full Text Available Critical Path Method (CPM technique has become widely recognized as valuable tool for the planning and scheduling large construction projects. The aim of this paper is to present an analytical method for finding the Critical Path in the precedence network diagram where the duration of each activity is represented by a trapezoidal fuzzy number. This Fuzzy Critical Path Method (FCPM uses a defuzzification formula for trapezoidal fuzzy number and applies it on the total float (slack time for each activity in the fuzzy precedence network to find the critical path. The method presented in this paper is very effective in determining the critical activities and finding the critical paths.

Critical Care Pharmacist Market Perceptions: Comparison of Critical Care Program Directors and Directors of Pharmacy.

Science.gov (United States)

Hager, David R; Persaud, Rosemary A; Naseman, Ryan W; Choudhary, Kavish; Carter, Kristen E; Hansen, Amanda

2017-05-01

Background: While hospital beds continue to decline as patients previously treated as inpatients are stabilized in ambulatory settings, the number of critical care beds available in the United States continues to rise. Growth in pharmacy student graduation, postgraduate year 2 critical care (PGY2 CC) residency programs, and positions has also increased. There is a perception that the critical care trained pharmacist market is saturated, yet this has not been evaluated since the rise in pharmacy graduates and residency programs. Purpose: To describe the current perception of critical care residency program directors (CC RPDs) and directors of pharmacy (DOPs) on the critical care pharmacist job market and to evaluate critical care postresidency placement and anticipated changes in PGY2 CC programs. Methods: Two electronic surveys were distributed from October 2015 to November 2015 through Vizient/University HealthSystem Consortium, American Society of Health-System Pharmacists (ASHP), Society of Critical Care Medicine, and American College of Clinical Pharmacy listservs to target 2 groups of respondents: CC RPDs and DOPs. Questions were based on the ASHP Pharmacy Forecast and the Pharmacy Workforce Center's Aggregate Demand Index and were intended to identify perceptions of the critical care market of the 2 groups. Results: Of 116 CC RPDs, there were 66 respondents (56.9% response rate). Respondents have observed an increase in applicants; however, they do not anticipate increasing the number of positions in the next 5 years. The overall perception is that there is a balance in supply and demand in the critical care trained pharmacist market. A total of 82 DOPs responded to the survey. Turnover of critical care pharmacists within respondent organizations is expected to be low. Although a majority of DOPs plan to expand residency training positions, only 9% expect to increase positions in critical care PGY2 training. Overall, DOP respondents indicated a balance of

Off-critical local height probabilities on a plane and critical partition functions on a cylinder

Directory of Open Access Journals (Sweden)

Omar Foda

2018-03-01

Full Text Available We compute off-critical local height probabilities in regime-III restricted solid-on-solid models in a 4N-quadrant spiral geometry, with periodic boundary conditions in the angular direction, and fixed boundary conditions in the radial direction, as a function of N, the winding number of the spiral, and τ, the departure from criticality of the model, and observe that the result depends only on the product Nτ. In the limit N→1, τ→τ0, such that τ0 is finite, we recover the off-critical local height probability on a plane, τ0-away from criticality. In the limit N→∞, τ→0, such that Nτ=τ0 is finite, and following a conformal transformation, we obtain a critical partition function on a cylinder of aspect-ratio τ0. We conclude that the off-critical local height probability on a plane, τ0-away from criticality, is equal to a critical partition function on a cylinder of aspect-ratio τ0, in agreement with a result of Saleur and Bauer.

Observations of mass transport phenomena in multicomponent liquid mixtures

International Nuclear Information System (INIS)

Mruzek, M.T.; Musinski, D.L.; Jacobs, R.B.

1985-01-01

Examples of surface tension effects on liquid behavior are common, such as liquid rising in a capillary tube or the beading of rain drops on a freshly waxed car. Usually through, the surface tension forces are small compared to other forces such as gravity. Situations exist, however, where the simple statement attributed to Marangoni can explain striking and unexpected observations. ''If for any reason difference of surface tension exist along a free liquid surface, liquid will flow toward the region of higher surface tension''. Such flows are called Marangoni flows. Observations of isotopic hydrogen fuel mixtures in cryogenic Inertial Confinement Fusion (ICF) targets can be explained on the basis of Marangoni flows. Additional experiments at KMS with common room temperature mixtures have produced similar results

Criticality meets learning: Criticality signatures in a self-organizing recurrent neural network.

Science.gov (United States)

Del Papa, Bruno; Priesemann, Viola; Triesch, Jochen

2017-01-01

Many experiments have suggested that the brain operates close to a critical state, based on signatures of criticality such as power-law distributed neuronal avalanches. In neural network models, criticality is a dynamical state that maximizes information processing capacities, e.g. sensitivity to input, dynamical range and storage capacity, which makes it a favorable candidate state for brain function. Although models that self-organize towards a critical state have been proposed, the relation between criticality signatures and learning is still unclear. Here, we investigate signatures of criticality in a self-organizing recurrent neural network (SORN). Investigating criticality in the SORN is of particular interest because it has not been developed to show criticality. Instead, the SORN has been shown to exhibit spatio-temporal pattern learning through a combination of neural plasticity mechanisms and it reproduces a number of biological findings on neural variability and the statistics and fluctuations of synaptic efficacies. We show that, after a transient, the SORN spontaneously self-organizes into a dynamical state that shows criticality signatures comparable to those found in experiments. The plasticity mechanisms are necessary to attain that dynamical state, but not to maintain it. Furthermore, onset of external input transiently changes the slope of the avalanche distributions - matching recent experimental findings. Interestingly, the membrane noise level necessary for the occurrence of the criticality signatures reduces the model's performance in simple learning tasks. Overall, our work shows that the biologically inspired plasticity and homeostasis mechanisms responsible for the SORN's spatio-temporal learning abilities can give rise to criticality signatures in its activity when driven by random input, but these break down under the structured input of short repeating sequences.

Critical Masses for Unreflected Metal Spheres

International Nuclear Information System (INIS)

Westfall, Robert Michael; Wright, Richard Q.

2009-01-01

Calculated critical masses of bare metal spheres for 28 actinide isotopes, using the SCALE/XSDRNPM one-dimensional, discrete-ordinates system, are presented. ENDF/B-VI, ENDF/B-VII, and JENDL-3.3 cross sections were used in the calculations. Results are given for isotopes of uranium, neptunium, plutonium, americium, curium, californium, and for one isotope of einsteinium. Calculated k values for these same nuclides are also given. We show that, for non-threshold or low-threshold fission nuclides, a good approximation for the nuclide k is the value of nubar at 1 MeV. A plot of the critical mass versus k values is given for 19 nuclides with A-numbers between 232 and 250. The peaks in the critical mass curve (for seven nuclides) correspond to dips in the k curve. For the seven cases with the largest critical mass, six are even-even nuclides. Neptunium-237, with a critical mass of about 62.7 kg (ENDF/B-VI calculation), has an odd number of protons and an even number of neutrons. However, two cases with quite small critical masses, 232U and 236Pu, are also even-even. These two nuclides do not exhibit threshold fission behavior like most other even-even nuclides. The largest critical mass is 208.8 kg for 243Am and the smallest is 2.44 kg for 251Cf. The calculated k values vary from 1.5022 for 234U to 4.4767 for 251Cf. A correlation between the calculated critical mass (kg) and the fission spectrum averaged value of is given for the elements U, Np, Pu, Am, Cm, and Cf. For each of the five elements, a fit to the data for that element is provided. In each case the fit employs a negative exponential of the form mass = exp(A + B ∼ ln). The values of A and B are element dependent and vary slightly for each of the five elements. The method described here is mainly applicable for non-threshold fission nuclides (15 of the 28 nuclides considered in this paper). There are three exceptions, 238Pu, 244Cm, and 250Cf, which all exhibit threshold fission behavior.

On the size of edge chromatic 5-critical graphs

Directory of Open Access Journals (Sweden)

K. Kayathri

2017-04-01

Full Text Available In this paper, we study the size of edge chromatic 5-critical graphs in several classes of 5-critical graphs. In most of the classes of 5-critical graphs in this paper, we have obtained their exact size and in the other classes of 5-critical graphs, we give new bounds on their number of major vertices and size.

Baryon number fluctuations in quasi-particle model

Energy Technology Data Exchange (ETDEWEB)

Zhao, Ameng [Southeast University Chengxian College, Department of Foundation, Nanjing (China); Luo, Xiaofeng [Central China Normal University, Key Laboratory of Quark and Lepton Physics (MOE), Institute of Particle Physics, Wuhan (China); Zong, Hongshi [Nanjing University, Department of Physics, Nanjing (China); Joint Center for Particle, Nuclear Physics and Cosmology, Nanjing (China); Institute of Theoretical Physics, CAS, State Key Laboratory of Theoretical Physics, Beijing (China)

2017-04-15

Baryon number fluctuations are sensitive to the QCD phase transition and the QCD critical point. According to the Feynman rules of finite-temperature field theory, we calculated various order moments and cumulants of the baryon number distributions in the quasi-particle model of the quark-gluon plasma. Furthermore, we compared our results with the experimental data measured by the STAR experiment at RHIC. It is found that the experimental data can be well described by the model for the colliding energies above 30 GeV and show large discrepancies at low energies. This puts a new constraint on the qQGP model and also provides a baseline for the QCD critical point search in heavy-ion collisions at low energies. (orig.)

Systematics of criticality data of special actinide nuclides deduced through the Trombay criticality formula

International Nuclear Information System (INIS)

Srinivasan, M.; SubbaRao, K.; Garg, S.B.; Acharya, G.V.

1989-01-01

The authors describe a number of interesting systematics and correlations deduced by analyzing the criticality data of special actinide nuclides using concepts embodied in the Trombay critically formula (TCF). The κ ∞ of fast metal actinide nuclides gives a remarkable linear correlation with the fissility parameter Z 2 /A. The neutron leakage probability of all fast metal cores characterized using a constant parameter σ std enables computation of the critical mass value of any unknown fissile nuclide knowing only its Z 2 /A value. Since the neutron leakage probability from dilute fissile solutions is primarily governed by the scattering/slowing down properties of the hydrogen present in water, critical masses and subcritical limits can be predicted for any water-reflected system at any specified hydrogen-to-actinide atomic ratio knowing only the κ ∞ value of the given fissile solution

Working Memory Strategies during Rational Number Magnitude Processing

Science.gov (United States)

Hurst, Michelle; Cordes, Sara

2017-01-01

Rational number understanding is a critical building block for success in more advanced mathematics; however, how rational number magnitudes are conceptualized is not fully understood. In the current study, we used a dual-task working memory (WM) interference paradigm to investigate the dominant type of strategy (i.e., requiring verbal WM…

Criticality alarm device

International Nuclear Information System (INIS)

Sasaki, Takashi.

1995-01-01

In a critical alarm device comprising an n-number of radiation detectors and a 2/3 logic module, the 2/3 logic module comprises a rectifier inputting an output of an AC power and outputting it as a full wave-rectified, DC voltage, an analog/digital converter inputting the output from the rectifier, putting it to analog/digital conversion and continuously storing it into a memory, a latch circuit inputting critical signals from the 2/3 logic and holding them and outputting latch signals, and a means for outputting timing signals for data storage to a memory based on clocks at a predetermined period and outputting timing signals for stopping the data storage to the memory after passing a predetermined period from the inputting time point if the latch signals are inputted from the latch circuit. Then, judgement whether the generation of criticality is caused by an actual radiation detection or by noises from the power source is enabled, to provide extremely high reliability. (N.H.)

Magnetocaloric effect and its implementation in critical behaviour ...

Indian Academy of Sciences (India)

Model; manganites; magnetization; magnetocaloric effect; critical exponent. 1. Introduction. Large number of magnetocaloric effect (MCE) materials have attracted much ... external magnetic field, which is advantageous for applica- tion as magnetic ... of the magnetic phase transition and critical behaviour can be obtained by ...

On Reynolds number dependence of micro-ramp-induced transition

NARCIS (Netherlands)

Ye, Q.; Schrijer, F.F.J.; Scarano, F.

2018-01-01

The variation of transitional flow features past a micro-ramp is investigated when the Reynolds number is decreased approaching the critical regime. Experiments are conducted in the incompressible flow spanning from supercritical to subcritical roughness-height-based Reynolds number ( , 730, 460

Wire-number effects on high-power annular z-pinches and some characteristics at high wire number

Energy Technology Data Exchange (ETDEWEB)

SANFORD,THOMAS W. L.

2000-05-23

Characteristics of annular wire-array z-pinches as a function of wire number and at high wire number are reviewed. The data, taken primarily using aluminum wires on Saturn are comprehensive. The experiments have provided important insights into the features of wire-array dynamics critical for high x-ray power generation, and have initiated a renaissance in z-pinches when high numbers of wires are used. In this regime, for example, radiation environments characteristic of those encountered during the early pulses required for indirect-drive ICF ignition on the NIF have been produced in hohlraums driven by x-rays from a z-pinch, and are commented on here.

Wire-number effects on high-power annular z-pinches and some characteristics at high wire number

International Nuclear Information System (INIS)

SANFORD, THOMAS W. L.

2000-01-01

Characteristics of annular wire-array z-pinches as a function of wire number and at high wire number are reviewed. The data, taken primarily using aluminum wires on Saturn are comprehensive. The experiments have provided important insights into the features of wire-array dynamics critical for high x-ray power generation, and have initiated a renaissance in z-pinches when high numbers of wires are used. In this regime, for example, radiation environments characteristic of those encountered during the early pulses required for indirect-drive ICF ignition on the NIF have been produced in hohlraums driven by x-rays from a z-pinch, and are commented on here

Fregean One-to-one Correspondence and Numbers as Object Properties

Directory of Open Access Journals (Sweden)

Boris Grozdanoff

2009-12-01

Full Text Available The paper critically examines an unpopular line of Frege’s view on numbers in the Foundations of Arithmetic. According to this view, which analyzes numbers in terms of properties and not in terms of extensions, numbers are properties of concepts vs. properties of objects. The latter view is held by Mill and is famously criticized in the Foundations. I argue that on the property account numbers cannot only be properties of concepts but they also have to be properties of objects. My main argument rests on purely metaphysical grounds. It stems from the motivation that were numbers only properties of concepts we would not have been able to explain mathematical truths about the physical world or those truths would have been miraculous. On pains that we do have mathematical truths about the physical world that are not miraculous we cannot agree with Frege’s property line about the metaphysical nature of numbers.

Reactor noise in critical and accelerator driven sub-critical systems

International Nuclear Information System (INIS)

Degweker, S.B.; Rana, Y.S.

2007-01-01

Noise methods have long been used for reactor kinetics parameters measurement and as diagnostic tools for monitoring the health of a nuclear power plant. It is conceivable that noise techniques would find similar applications in ADS. Measurement/monitoring the degree of sub-criticality of an ADS is one such application for which noise based methods are being considered, among others such as the pulsed source method. For this reason, theoretical studies on ADS noise have appeared since the late nineties. The principal difference between critical reactor noise and ADS noise is due to the statistical properties of the source. Unlike the source due to radioactive decay present in ordinary reactors, the machine produced ADS source cannot be assumed to be a Poisson process. In addition the source is pulsed. All this requires a new theoretical approach to the subject. In a number of papers (beginning in 2000) such a theoretical approach has been developed in BARC. Over the years, our approach has received general acceptance. The paper gives a description of the subject of reactor noise and its applications in critical reactors. The theory of noise in ADS is then outlined, highlighting the differences in approach and results from that of critical reactors. (author)

The Top Ten Websites in Critical Care Medicine Education Today.

Science.gov (United States)

Wolbrink, Traci A; Rubin, Lucy; Burns, Jeffrey P; Markovitz, Barry

2018-01-01

The number of websites for the critical care provider is rapidly growing, including websites that are part of the Free Open Access Med(ical ed)ucation (FOAM) movement. With this rapidly expanding number of websites, critical appraisal is needed to identify quality websites. The last major review of critical care websites was published in 2011, and thus a new review of the websites relevant to the critical care clinician is necessary. A new assessment tool for evaluating critical care medicine education websites, the Critical Care Medical Education Website Quality Evaluation Tool (CCMEWQET), was modified from existing tools. A PubMed and Startpage search from 2007 to 2017 was conducted to identify websites relevant to critical care medicine education. These websites were scored based on the CCMEWQET. Ninety-seven websites relevant for critical care medicine education were identified and scored, and the top ten websites were described in detail. Common types of resources available on these websites included blog posts, podcasts, videos, online journal clubs, and interactive components such as quizzes. Almost one quarter of websites (n = 22) classified themselves as FOAM websites. The top ten websites most often included an editorial process, high-quality and appropriately attributed graphics and multimedia, scored much higher for comprehensiveness and ease of access, and included opportunities for interactive learning. Many excellent online resources for critical care medicine education currently exist, and the number is likely to continue to increase. Opportunities for improvement in many websites include more active engagement of learners, upgrading navigation abilities, incorporating an editorial process, and providing appropriate attribution for graphics and media.

Critical Values for Yen’s Q₃

DEFF Research Database (Denmark)

Christensen, Karl Bang; Makransky, Guido; Horton, Mike

2017-01-01

The assumption of local independence is central to all item response theory (IRT) models. Violations can lead to inflated estimates of reliability and problems with construct validity. For the most widely used fit statistic Q3, there are currently no well-documented suggestions of the critical...... to the data set, and provide example critical values for a number of data structure situations. The results show that for the Q3 fit statistic, no single critical value is appropriate for all situations, as the percentiles in the empirical null distribution are influenced by the number of items, the sample...... size, and the number of response categories. Furthermore, the results show that LD should be considered relative to the average observed residual correlation, rather than to a uniform value, as this results in more stable percentiles for the null distribution of an adjusted fit statistic....

Critical experiments AT Pacific Northwest Laboratory

International Nuclear Information System (INIS)

Clayton, E.D.; Bierman, S.R.

1984-01-01

After a short description of the facility, a brief listing of the principal types of fuel forms and assembly geometries is provided. A number of experiments have recently been performed on plain fissionable units, or isolated assemblies of single units, that include measurements on solutions composed of Pu-U mixtures and critical experiment data on lattices of low enriched uranium in water. Experiments have been performed on planar arrays of containers with Pu solutions because of the lack of data in this field concerning the safe storage of nuclear fuel; others have been conducted on arrays of low enriched U lattice assemblies. Neutronic measurements to date have shown they can be used to provide additional benchmark data for improvement and validation of criticality codes. Studies have previously been made to ascertain the need for critical experiments in support of fuel recycle operations. The result of an effort to update the list of needed critical experiments is summarized in this section. Experiments are listed in support of uranium based fuels and fast breeder reactor fuels. An effort is made to identify those areas within the fuel cycle wherein the critical experiment data would be applied and to identify the experiments (and data) required to fulfill the needs in each of these areas. The type and form of fuel on which the data would be obtained also are identified. In presenting this information, no attempt is made to describe the experiments in detail, or to define the actual number of critical experiments that might be needed to provide the required data

Critical field measurements in a superconducting networks

International Nuclear Information System (INIS)

Pannetier, B.; Chaussy, J.; Rammal, R.

1984-01-01

We have measured the critical field of a periodic two-dimensional network of superconducting indium. At low fields, the critical line Hsub(c)(T) reflects the network topology and exhibits well-defined cusps due to flux quantization corresponding to both integer and rational number of flux quanta phi 0 = h/2e per unit loop of the network [fr

The link between Movability Number and Incipient Motion in river ...

African Journals Online (AJOL)

This allowed for a firmer definition of Incipient Motion as well as a new bedload transportation equation. Additional laboratory experimentation for Particle Reynolds number over the range 0.12-486 facilitated the improved prediction of Incipient Motion from a plot of the critical Movability Number vs. Particle Reynolds number ...

Static analysis of material testing reactor cores:critical core calculations

International Nuclear Information System (INIS)

Nawaz, A. A.; Khan, R. F. H.; Ahmad, N.

1999-01-01

A methodology has been described to study the effect of number of fuel plates per fuel element on critical cores of Material Testing Reactors (MTR). When the number of fuel plates are varied in a fuel element by keeping the fuel loading per fuel element constant, the fuel density in the fuel plates varies. Due to this variation, the water channel width needs to be recalculated. For a given number of fuel plates, water channel width was determined by optimizing k i nfinity using a transport theory lattice code WIMS-D/4. The dimensions of fuel element and control fuel element were determined using this optimized water channel width. For the calculated dimensions, the critical cores were determined for the given number of fuel plates per fuel element by using three dimensional diffusion theory code CITATION. The optimization of water channel width gives rise to a channel width of 2.1 mm when the number of fuel plates is 23 with 290 g ''2''3''5U fuel loading which is the same as in the case of Pakistan Reactor-1 (PARR-1). Although the decrease in number of fuel element results in an increase in optimal water channel width but the thickness of standard fuel element (SFE) and control fuel element (CFE) decreases and it gives rise to compact critical and equilibrium cores. The criticality studies of PARR-1 are in good agreement with the predictions

Consideration of Nuclear Criticality When Directly Disposing Highly Enriched Spent Nuclear Fuel in Unsaturated Tuff - I: Nuclear Criticality Constraints

International Nuclear Information System (INIS)

Rechard, Rob P.; Sanchez, Lawrence C.; Trellue, Holly R.

2003-01-01

This paper presents the mass, concentration, and volume required for a critical event to occur in homogeneous mixtures of fissile material and various other geologic materials. The fissile material considered is primarily highly enriched uranium spent fuel; however, 239 Pu is considered in some cases. The non-fissile materials examined are those found in the proposed repository area at Yucca Mountain, Nevada: volcanic tuff, iron rust, concrete, and naturally occurring water. For 235 U, the minimum critical solid concentration for tuff was 5 kg/m 3 (similar to sandstone), and in goethite, 45 kg/m 3 . The critical mass of uranium was sensitive to a number of factors, such as moisture content and fissile enrichment, but had a minimum, assuming almost 100% saturation and >20% enrichment, of 18 kg in tuff as Soddyite (or 9.5 kg as UO 2 ) and 7 kg in goethite. For 239 Pu, the minimum critical solid concentration for tuff was 3 kg/m 3 (similar to sandstone); in goethite, 20 kg/m 3 . The critical mass of plutonium was also sensitive to a number of factors, but had a minimum, assuming 100% saturation and 80-90% enrichment, of 5 kg in tuff and 6 kg in goethite

Morphogenesis of polycrystalline dendritic patterns from evaporation of a reactive nanofluid sessile drop

Science.gov (United States)

Wu, Hua; Briscoe, Wuge H.

2018-04-01

We report polycrystalline residual patterns with dendritic micromorphologies upon fast evaporation of a mixed-solvent sessile drop containing reactive ZnO nanoparticles. The molecular and particulate species generated in situ upon evaporative drying collude with and modify the Marangoni solvent flows and Bénard-Marangoni instabilities, as they undergo self-assembly and self-organization under conditions far from equilibrium, leading to the ultimate hierarchical central cellular patterns surrounded by a peripheral coffee ring upon drying.

Does good critical thinking equal effective decision-making among critical care nurses? A cross-sectional survey.

Science.gov (United States)

Ludin, Salizar Mohamed

2018-02-01

A critical thinker may not necessarily be a good decision-maker, but critical care nurses are expected to utilise outstanding critical thinking skills in making complex clinical judgements. Studies have shown that critical care nurses' decisions focus mainly on doing rather than reflecting. To date, the link between critical care nurses' critical thinking and decision-making has not been examined closely in Malaysia. To understand whether critical care nurses' critical thinking disposition affects their clinical decision-making skills. This was a cross-sectional study in which Malay and English translations of the Short Form-Critical Thinking Disposition Inventory-Chinese Version (SF-CTDI-CV) and the Clinical Decision-making Nursing Scale (CDMNS) were used to collect data from 113 nurses working in seven critical care units of a tertiary hospital on the east coast of Malaysia. Participants were recruited through purposive sampling in October 2015. Critical care nurses perceived both their critical thinking disposition and decision-making skills to be high, with a total score of 71.5 and a mean of 48.55 for the SF-CTDI-CV, and a total score of 161 and a mean of 119.77 for the CDMNS. One-way ANOVA test results showed that while age, gender, ethnicity, education level and working experience factors significantly impacted critical thinking (pnurses' critical thinking and clinical decision-making (r=0.637, p=0.001). While this small-scale study has shown a relationship exists between critical care nurses' critical thinking disposition and clinical decision-making in one hospital, further investigation using the same measurement tools is needed into this relationship in diverse clinical contexts and with greater numbers of participants. Critical care nurses' perceived high level of critical thinking and decision-making also needs further investigation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Criticality for charged black branes

Science.gov (United States)

Hennigar, Robie A.

2017-09-01

We show that the inclusion of higher curvature terms in the gravitational action can lead to phase transitions and critical behaviour for charged black branes. The higher curvature terms considered here belong to the recently constructed generalized quasi-topological class [arXiv:1703.01631], which possess a number of interesting properties, such as being ghost-free on constant curvature backgrounds and non-trivial in four dimensions. We show that critical behaviour is a generic feature of the black branes in all dimensions d ≥ 4, and contextualize the results with a review of the properties of black branes in Lovelock and quasi-topological gravity, where critical behaviour is not possible. These results may have interesting implications for the CFTs dual to this class of theories.

The Acceptance of Critical-Cultural Scholarship in Mass Communication Education.

Science.gov (United States)

Switzer, Les; Ryan, Michael

2002-01-01

Notes that critical-cultural studies have had little impact on journalism and mass communication education for a number of reasons. Surveys 100 journalism and mass communication programs. Examines how critical-cultural faculty interact with the university community. Finds that scholars, as a whole, were open to critical-cultural perspectives.…

"More Complicated than a Numbers Game": A Critical Race Theory Examination of Asian Americans and Campus Racial Climate

Science.gov (United States)

Poon, Oi Yan Anita

2010-01-01

In the Grutter and Gratz Supreme Court decision, proponents of affirmative action claimed that a critical mass of minority students could effectively counter racial marginalization often experienced by students of color due to their racial status. On some campuses, Asian Americans as a pan-ethnic population enjoy a critical mass in undergraduate…

Mechanics of occurrence of critical flow in compressible two-phase flow

International Nuclear Information System (INIS)

Katto, Yoshiro; Sudo, Yukio

1976-01-01

Fundamental framework of mechanics for the occurrence of critical flow is investigated, following the principle that the critical flow appears as a limit in a continuous change of state of flow along a nozzle (or a pipe) and should be derived only from simultaneous mechanical equations concerned with the flow. Mathematical procedures with which the critical flow: (i) the single phase flow of an arbitrary fluid, unrestricted by the equation of state of ideal gas, where the number of simultaneous equations is equal to the number of independent variables, and (ii) the one-component, separated two-phase flow under saturated condition, where the number of equations exceeds that of variables. In each case, interesting mechanism of leading to the occurrence of a limiting state of flow at a definite cross-section in a nozzle (incl. a pipe) is clarified, and a definite state of flow at the critical cross-section is also determined. Then, the analysis is extended to the critical flow which should appear in the completely isolated and the homogeneously dispersed, two-component, two-phase flow (composed of a compressible and an incompressible substance). It is found that the analyses of these special flow patterns provide several supplementary information to the mechanics of critical flow. (auth.)

Fractal properties of critical invariant curves

International Nuclear Information System (INIS)

Hunt, B.R.; Yorke, J.A.; Khanin, K.M.; Sinai, Y.G.

1996-01-01

We examine the dimension of the invariant measure for some singular circle homeomorphisms for a variety of rotation numbers, through both the thermodynamic formalism and numerical computation. The maps we consider include those induced by the action of the standard map on an invariant curve at the critical parameter value beyond which the curve is destroyed. Our results indicate that the dimension is universal for a given type of singularity and rotation number, and that among all rotation numbers, the golden mean produces the largest dimension

Long-wave-instability-induced pattern formation in an evaporating sessile or pendent liquid layer

Science.gov (United States)

Wei, Tao; Duan, Fei

2018-03-01

We investigate the nonlinear dynamics and stability of an evaporating liquid layer subject to vapor recoil, capillarity, thermocapillarity, ambient cooling, viscosity, and negative or positive gravity combined with buoyancy effects in the lubrication approximation. Using linear theory, we identify the mechanisms of finite-time rupture, independent of thermocapillarity and direction of gravity, and predict the effective growth rate of an interfacial perturbation which reveals competition among the mechanisms. A stability diagram is predicted for the onset of long-wave (LW) evaporative convection. In the two-dimensional simulation, we observe well-defined capillary ridges on both sides of the valley under positive gravity and main and secondary droplets under negative gravity, while a ridge can be trapped in a large-scale drained region in both cases. Neglecting the other non-Boussinesq effects, buoyancy does not have a significant influence on interfacial evolution and rupture time but makes contributions to the evaporation-driven convection and heat transfer. The average Nusselt number is found to increase with a stronger buoyancy effect. The flow field and interface profile jointly manifest the LW Marangoni-Rayleigh-Bénard convection under positive gravity and the LW Marangoni convection under negative gravity. In the three-dimensional simulation of moderate evaporation with a random perturbation, the rupture patterns are characterized by irregular ridge networks with distinct height scales for positive and negative gravity. A variety of interfacial and internal dynamics are displayed, depending on evaporation conditions, gravity, Marangoni effect, and ambient cooling. Reasonable agreement is found between the present results and the reported experiments and simulations. The concept of dissipative compacton also sheds light on the properties of interfacial fractalization.

Radiation and nitrogen use at the leaf and canopy level by wheat and oilseed rape during the critical period for grain number definition

International Nuclear Information System (INIS)

Dreccer, M.F.; Schapendonk, H.C.M.; Oijen, M. van; Pot, C.S.; Rabbinge, R.

2000-01-01

During the critical period for grain number definition, the amount of biomass produced per unit absorbed radiation is more sensitive to nitrogen (N) supply in oilseed rape than in wheat, and reaches a higher value at high N. This response was investigated by combining experimental and modelling work. Oilseed rape and wheat were grown at three levels of N supply, combined with two levels of plant density at high N supply. Canopy photosynthesis and daytime radiation use efficiency (RUE A ) were calculated with a model based on observed N-dependent leaf photosynthesis and observed canopy vertical distribution of light and leaf N. In oilseed rape, RUE A was higher than in wheat and, in contrast to wheat, the sensitivity to canopy leaf N content increased from the start to the end of the critical period. These results were partly explained by the higher leaf photosynthesis in oilseed rape vs wheat. In addition, oilseed rape leaves were increasingly shaded by the inflorescence. Thus, RUE A increased because more leaves were operating at non-saturating light levels. In both species, the vertical distribution of leaf N was close to that optimising canopy photosynthesis. The results are discussed in relation to possibilities for improvement of N productivity in these crops. (author)

Heterogeneity of publicly accessible online critical values for therapeutic drugs

Directory of Open Access Journals (Sweden)

Colt M McClain

2011-01-01

Full Text Available Introduction: Critical values are reported to clinicians when laboratory values are life threatening and require immediate attention. To date no definitive critical value limit recommendations have been produced regarding therapeutic drug monitoring. Some laboratories choose to publish critical value lists online. These publicly available values may be accessed and potentially utilized by laboratory staff, patient care providers, and patients. Materials and Methods: A web-based search of laboratories associated with the Accreditation Council for Graduate Medical Education pathology residency programs was initiated to determine which therapeutic drugs had critical values and to examine the degree of variation in published critical values for these institutions. Results: Of the 107 institutions with university-based pathology training programs, 36 had published critical values online for review. Thirteen therapeutic drugs were investigated and the number of institutions reporting critical value limits for the drug, as well as the median, range, standard deviation, and the coefficient of variation of critical value concentration limits for each drug were determined. A number of the online critical value limits were deemed to be erroneous, most likely due to incorrectly listed units of measurement. Conclusions: There was a large degree of heterogeneity with regard to the chosen critical value limits for therapeutic drugs. This wide variance in critical values appears to be greater than that observed in interassay proficiency testing. Institutions should reexamine the rationale for their current critical value parameters and ensure that critical value limits and associated units are accurately published online.

MATERIAL COMPOSITIONS AND NUMBER DENSITIES FOR NEUTRONICS CALCULATIONS

International Nuclear Information System (INIS)

D. A. Thomas

1996-01-01

The purpose of this analysis is to calculate the number densities and isotopic weight percentages of the standard materials to be used in the neutronics (criticality and radiation shielding) evaluations by the Waste Package Development Department. The objective of this analysis is to provide material number density information which can be referenced by future neutronics design analyses, such as for those supporting the Conceptual Design Report

The winding number of three complexes in SU(3)

International Nuclear Information System (INIS)

Lasher, G.

1989-01-01

The Phillip-Stone algorithm for the topological charge of a lattice gauge field requires the computation of the winding number of certain 3-complexes in the space of the group. The extension of the computational procedure for the SU(2) gauge group to SU(3) requires an understanding of the SU(3) geometry. An important issue is the behavior of a 3-cell in SU(3) as it approaches a critical configuration, i.e., one at which the cell is a discontinuous function of its vertices. A measure of the proximity of a cell to criticality is found and a method for computing its contribution to the winding number is recommended. (orig.)

Pandemic influenza-implications for critical care resources in Australia and New Zealand.

Science.gov (United States)

Anderson, Therese A; Hart, Graeme K; Kainer, Marion A

2003-09-01

To quantify resource requirements (additional beds and ventilator capacity), for critical care services in the event of pandemic influenza. Cross-sectional survey about existing and potential critical care resources. Participants comprised 156 of the 176 Australasian (Australia and New Zealand) critical care units on the database of the Australian and New Zealand Intensive Care Society (ANZICS) Research Centre for Critical Care Resources. The Meltzer, Cox and Fukuda model was adapted to map a range of influenza attack rate estimates for hospitalisation and episodes likely to require intensive care and to predict critical care admission rates and bed day requirements. Estimations of ventilation rates were based on those for community-acquired pneumonia. The estimated extra number of persons requiring hospitalisation ranged from 8,455 (10% attack rate) to 150,087 (45% attack rate). The estimated number of additional admissions to critical care units ranged from 423 (5% admission rate, 10% attack rate) to 37,522 (25% admission rate, 45% attack rate). The potential number of required intensive care bed days ranged from 846 bed days (2 day length of stay, 10% attack rate) to 375,220 bed days (10 day length of stay, 45% attack rate). The number of persons likely to require mechanical ventilation ranged from 106 (25% of projected critical care admissions, 10% attack rate) to 28,142 (75% of projected critical care admissions, 45% attack rate). An additional 1,195 emergency ventilator beds were identified in public sector and 248 in private sector hospitals. Cancellation of elective surgery could release a potential 76,402 intensive care bed days (per annum), but in the event of pandemic influenza, 31,150 bed days could be required over an 8- to 12-week period. Australasian critical care services would be overwhelmed in the event of pandemic influenza. More work is required in relation to modelling, contingency plans, and resource allocation.

Thermodiffusion as a means to manipulate liquid film dynamics on chemically patterned surfaces.

Science.gov (United States)

Kalpathy, Sreeram K; Shreyes, Amrita Ravi

2017-06-07

The model problem examined here is the stability of a thin liquid film consisting of two miscible components, resting on a chemically patterned solid substrate and heated from below. In addition to surface tension gradients, the temperature variations also induce gradients in the concentration of the film by virtue of thermodiffusion/Soret effects. We study the stability and dewetting behaviour due to the coupled interplay between thermal gradients, Soret effects, long-range van der Waals forces, and wettability gradient-driven flows. Linear stability analysis is first employed to predict growth rates and the critical Marangoni number for chemically homogeneous surfaces. Then, nonlinear simulations are performed to unravel the interfacial dynamics and possible locations of the film rupture on chemically patterned substrates. Results suggest that appropriate tuning of the Soret parameter and its direction, in conjunction with either heating or cooling, can help manipulate the location and time scales of the film rupture. The Soret effect can either potentially aid or oppose film instability depending on whether the thermal and solutal contributions to flow are cooperative or opposed to each other.

Geographic Hotspots of Critical National Infrastructure.

Science.gov (United States)

Thacker, Scott; Barr, Stuart; Pant, Raghav; Hall, Jim W; Alderson, David

2017-12-01

Failure of critical national infrastructures can result in major disruptions to society and the economy. Understanding the criticality of individual assets and the geographic areas in which they are located is essential for targeting investments to reduce risks and enhance system resilience. Within this study we provide new insights into the criticality of real-life critical infrastructure networks by integrating high-resolution data on infrastructure location, connectivity, interdependence, and usage. We propose a metric of infrastructure criticality in terms of the number of users who may be directly or indirectly disrupted by the failure of physically interdependent infrastructures. Kernel density estimation is used to integrate spatially discrete criticality values associated with individual infrastructure assets, producing a continuous surface from which statistically significant infrastructure criticality hotspots are identified. We develop a comprehensive and unique national-scale demonstration for England and Wales that utilizes previously unavailable data from the energy, transport, water, waste, and digital communications sectors. The testing of 200,000 failure scenarios identifies that hotspots are typically located around the periphery of urban areas where there are large facilities upon which many users depend or where several critical infrastructures are concentrated in one location. © 2017 Society for Risk Analysis.

Web-based resources for critical care education.

Science.gov (United States)

Kleinpell, Ruth; Ely, E Wesley; Williams, Ged; Liolios, Antonios; Ward, Nicholas; Tisherman, Samuel A

2011-03-01

reviews of the benefits of utilizing e-learning. Review of the Web sites of relevant critical care organizations revealed the existence of a number of e-learning resources, including online critical care courses, tutorials, podcasts, webcasts, slide sets, and continuing medical education resources, some requiring membership or a fee to access. Respondents to listserve queries (>100) and critical care medicine fellowship director and advanced practice nursing educator e-mail queries (>50) identified the use of a number of tutorials, self-directed learning modules, and video-enhanced programs for critical care education and practice. In all, >135 Web-based education resources exist, including video Web resources for critical care education in a variety of e-learning formats, such as tutorials, self-directed learning modules, interactive case studies, webcasts, podcasts, and video-enhanced programs. As identified by critical care educators and practitioners, e-learning is actively being integrated into critical care medicine and nursing training programs for continuing medical education and competency training purposes. Knowledge of available Web-based educational resources may enhance critical care practitioners' ongoing learning and clinical competence, although this has not been objectively measured to date.

Criticality management of Tokai reprocessing facility

Energy Technology Data Exchange (ETDEWEB)

Nojiri, Ichiro [Japan Nuclear Cycle Development Inst., Tokai, Ibaraki (Japan)

2001-01-01

In fuel cycle centers a number of equipment and vessels of various types and of complex design are used in several processes, i.e. dissolution of spent fuels, separation and storage of uranium and plutonium from fission products and transuranium elements. For each processes, Monte Carlo codes are frequently applied to manage the fuel criticality. Safety design depends largely on specific features of each facilities. The present report describes status of criticality management for main processes in Tokai Reprocessing Facility, JNC, and the criticality conditions specifically existing there. The guiding principle throughout consists of mass control, volume control, design (form) control, concentration control, and control due to employment of neutron poisons. (S. Ohno)

Nuclear data for criticality safety

International Nuclear Information System (INIS)

Westfall, R.M.

1994-01-01

A brief overview is presented on emerging requirements for new criticality safety analyses arising from applications involving nuclear waste management, facility remediation, and the storage of nuclear weapons components. A derivation of criticality analyses from the specifications of national consensus standards is given. These analyses, both static and dynamic, define the needs for nuclear data. Integral data, used primarily for analytical validation, and differential data, used in performing the analyses, are listed, along with desirable margins of uncertainty. Examples are given of needs for additional data to address systems having intermediate neutron energy spectra and/or containing nuclides of intermediate mass number

The analysis of failure data in the presence of critical and degraded failures

International Nuclear Information System (INIS)

Haugen, Knut; Hokstad, Per; Sandtorv, Helge

1997-01-01

Reported failures are often classified into severityclasses, e.g., as critical or degraded. The critical failures correspond to loss of function(s) and are those of main concern. The rate of critical failures is usually estimated by the number of observed critical failures divided by the exposure time, thus ignoring the observed degraded failures. In the present paper failure data are analyzed, applying an alternative estimate for the critical failure rate, also taking the number of observed degraded failures into account. The model includes two alternative failure mechanisms, one being of the shock type, immediately leading to a critical failure, another resulting in a gradual deterioration, leading to a degraded failure before the critical failure occurs. Failure data on safety valves from the OREDA (Offshore REliability DAta) data base are analyzed using this model. The estimate for the critical failure rate is obtained and compared with the standard estimate

CriticalEd

DEFF Research Database (Denmark)

Kjellberg, Caspar Mølholt; Meredith, David

2014-01-01

. Since the comments are not input sequentially, with regard to position, but in arbitrary order, this list must be sorted by copy/pasting the rows into place—an error-prone and time-consuming process. Scholars who produce critical editions typically use off-the-shelf music notation software......The best text method is commonly applied among music scholars engaged in producing critical editions. In this method, a comment list is compiled, consisting of variant readings and editorial emendations. This list is maintained by inserting the comments into a document as the changes are made......, consisting of a Sibelius plug-in, a cross-platform application, called CriticalEd, and a REST-based solution, which handles data storage/retrieval. A prototype has been tested at the Danish Centre for Music Publication, and the results suggest that the system could greatly improve the efficiency...

Bowel management systems in critical care: a service evaluation.

Science.gov (United States)

Ritzema, Jennifer

2017-01-25

Aim Many patients who are critically ill develop faecal incontinence associated with diarrhoea, and require a bowel management system (BMS) to prevent skin excoriation. Following guidelines produced by the National Institute for Health and Care Excellence, early rehabilitation has resulted in a reduction in the number of days that patients receive mechanical ventilation. However, patients with a BMS are potentially mechanically ventilated for longer because they are cared for in bed. The aim of this evaluation was to investigate whether patients with a BMS are mechanically ventilated for longer than those without a BMS. Method This was a retrospective service evaluation, in which a database search was conducted to identify patients admitted to the critical care department in one healthcare organisation during 2013. The search was narrowed to identify patients admitted to the critical care department who had received advanced respiratory support (mechanical ventilation), to compare the mean number of mechanically ventilated days between patients with and without a BMS (n = 122). Data were analysed using the Mann-Whitney U test. Results There was a significant difference in the number of mechanically ventilated days (Pcritically ill patients with a BMS are placed in a sitting position for short periods of time. Further research should explore alternative bowel care options for patients who are critically ill.

Nuclear criticality safety: 3-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1993-06-01

The open-quotes 3-Day Training Courseclose quotes is an intensive course in criticality safety consisting of lectures and laboratory sessions, including active student participation in actual critical experiments, a visit to a plutonium processing facility, and in-depth discussions on safety philosophy. The program is directed toward personnel who currently have criticality safety responsibilities in the capacity of supervisory staff and/or line management. This compilation of notes is presented as a source reference for the criticality safety course. It represents the contributions of many people, particularly Tom McLaughlin, the course's primary instructor. It should be noted that when chapters were extracted, an attempt was made to maintain footnotes and references as originally written. Photographs and illustrations are numbered sequentially

Strong coupling QCD at finite baryon-number density

International Nuclear Information System (INIS)

Karsch, F.; Muetter, K.H.

1989-01-01

We present a new representation of the partition function for strong-coupling QCD which is suitable also for finite baryon-number-density simulations. This enables us to study the phase structure in the canonical formulation (with fixed baryon number B) as well as the grand canonical one (with fixed chemical potential μ). We find a clear signal for a first-order chiral phase transition at μ c a=0.63. The critical baryon-number density n c a 3 =0.045 is only slightly higher than the density of nuclear matter. (orig.)

Safety implications of anomalous effects of neutron absorbers on criticality

International Nuclear Information System (INIS)

Clayton, E.D.

1987-04-01

A number of ''anomalies'' in nuclear criticality have been disclosed in recent years, and as new data have become available additional anomalies have come to light. Application of existing data, without familiarity with the anomalies could lead to diminished criticality control, or more costly less efficient control. As neutron absobers are frequently used for criticality control, this paper briefly presents and discusses six apparent anomalies pertaining to the effect of neutron absorbers on the criticality of fissionable material

ARCHITECTURE IN EFFECT: A Glance at Critical Historiography

Directory of Open Access Journals (Sweden)

Navid Gohardani

2014-03-01

Full Text Available Historiography marks a relatively unexplored research domain in architecture. Despite the obscure nature of this subject matter, architectural historiography equally illuminates a hidden pathway to the historical interaction of architecture with art or literature. Critical historiography adds another dimension to this emerging research topic that further encapsulates multiple levels of criticism. In recognition of a growing interest for historiography, it can be argued that the critical aspects of historiography may serve as crucial instruments for an enhanced understanding of architectural historiography. In this article, the realm of architectural historiography is investigated through a multidisciplinary perspective that revisits architectural criticism, critical historiography, modern architecture, phenomenology, and a number of aspects of architectural historiography in the Swedish Million Homes Program.

Determination of the number of software tests using probabilistic safety assessment

International Nuclear Information System (INIS)

Kang, H. K.; Seong, T. Y.; Lee, K. Y.

2000-01-01

The broader usage of digital equipment in nuclear power plants gives rise to the safety problems of software. The field test should be performed before the software is used in critical applications because it is well known that software shows non-linear response when it is applied to different target systems in different environment. In the case of safety-critical applications, the result of tests contains usually zero failure case and the satisfiable number of tests is hard to be determined. In this paper, we suggests the method to determine the number of software tests without failure using the probabilistic safety assessment. From the result of the probabilistic safety assessment on total system, the desirable unavailability of software is calculated and the number of tests is determined

Chinese Number Words, Culture, and Mathematics Learning

Science.gov (United States)

Ng, Sharon Sui Ngan; Rao, Nirmala

2010-01-01

This review evaluates the role of language--specifically, the Chinese-based system of number words and the simplicity of Chinese mathematical terms--in explaining the relatively superior performance of Chinese and other East Asian students in cross-national studies of mathematics achievement. Relevant research is critically reviewed focusing on…

Influence of surfactants in forced dynamic dewetting.

Science.gov (United States)

Henrich, Franziska; Fell, Daniela; Truszkowska, Dorota; Weirich, Marcel; Anyfantakis, Manos; Nguyen, Thi-Huong; Wagner, Manfred; Auernhammer, Günter K; Butt, Hans-Jürgen

2016-09-20

In this work we show that the forced dynamic dewetting of surfactant solutions depends sensitively on the surfactant concentration. To measure this effect, a hydrophobic rotating cylinder was horizontally half immersed in aqueous surfactant solutions. Dynamic contact angles were measured optically by extrapolating the contour of the meniscus to the contact line. Anionic (sodium 1-decanesulfonate, S-1DeS), cationic (cetyl trimethylammonium bromide, CTAB) and nonionic surfactants (C 4 E 1 , C 8 E 3 and C 12 E 5 ) with critical micelle concentrations (CMCs) spanning four orders of magnitude were used. The receding contact angle in water decreased with increasing velocity. This decrease was strongly enhanced when adding surfactant, even at surfactant concentrations of 10% of the critical micelle concentration. Plots of the receding contact angle-versus-velocity almost superimpose when being plotted at the same relative concentration (concentration/CMC). Thus the rescaled concentration is the dominating property for dynamic dewetting. The charge of the surfactants did not play a role, thus excluding electrostatic effects. The change in contact angle can be interpreted by local surface tension gradients, i.e. Marangoni stresses, close to the three-phase contact line. The decrease of dynamic contact angles with velocity follows two regimes. Despite the existence of Marangoni stresses close to the contact line, for a dewetting velocity above 1-10 mm s -1 the hydrodynamic theory is able to describe the experimental results for all surfactant concentrations. At slower velocities an additional steep decrease of the contact angle with velocity was observed. Particle tracking velocimetry showed that the flow profiles do not differ with and without surfactant on a scales >100 μm.

Characterization of the critical submanifolds in quantum ensemble control landscapes

International Nuclear Information System (INIS)

Wu Rebing; Rabitz, Herschel; Hsieh, Michael

2008-01-01

The quantum control landscape is defined as the functional that maps the control variables to the expectation values of an observable over the ensemble of quantum systems. Analyzing the topology of such landscapes is important for understanding the origins of the increasing number of laboratory successes in the optimal control of quantum processes. This paper proposes a simple scheme to compute the characteristics of the critical topology of the quantum ensemble control landscapes showing that the set of disjoint critical submanifolds one-to-one corresponds to a finite number of contingency tables that solely depend on the degeneracy structure of the eigenvalues of the initial system density matrix and the observable whose expectation value is to be maximized. The landscape characteristics can be calculated as functions of the table entries, including the dimensions and the numbers of positive and negative eigenvalues of the Hessian quadratic form of each of the connected components of the critical submanifolds. Typical examples are given to illustrate the effectiveness of this method

Refinement of criticality and breeding parameters by means of experiments on a series of critical assemblies

International Nuclear Information System (INIS)

Golubev, V.I.; Dulin, V.A.; Kazanskij, Yu.A.; Mamontov, V.M.; Mozhaev, V.K.; Sidorov, G.I.

1980-01-01

A programme of measurements was performed on a number of critical assemblies with the aim of obtaining reliable experimental data under conditions approximating the simplest calculation model. To this end the neutron balance at the centres of the BFS-31, BFS-33, BFS-35, BFS-38, KBR-3 and KBR-7 critical assemblies was investigated. These assemblies contained central inserts made of uranium dioxide (BFS-33), natural uranium oxide and plutonium metal (BFS-31), natural uranium and plutonium metal (BFS-38), 90% enriched metallic uranium and stainless steel (KBR-3) and enriched uranium dioxide and nickel (KBR-7). The composition of the inserts was such that Ksub(infinite)=1. The K + values, the ratios of the reaction rates of the principal raw material and fissionable isotopes and the reactivity coefficients of a number of materials were measured in the inserts. The components of the breeding coefficient were measured at the centre of the BFS-39 critical assembly which simulates a power reactor (simplest composition with low- and high-enrichment zones and no control mechanism). The authors describe briefly the critical assemblies, the methods of measurement and calculation and methods of correcting for differences between the calculation model and the conditions under which the measurements were performed and compare the results of the experiments with the corresponding theoretical values obtained using various systems of group constants. In their latest versions, the group constants derived from different sets of integral experiments describe the experimental data much better than was previously possible. The deviations which occur in the predicted criticality and breeding parameters using different versions of the constants essentially reflect the difference in the results of the sets of integral experiments that were used for the group constants. (author)

Numerical Simulation of the Kinetic Critical Nucleus

OpenAIRE

Sanada, Masaaki; Nishioka, Kazumi; Okada, Masahumi; Maksimov, Igor, L.

1997-01-01

Our main interest is to see whether the number density indicates a peak at the kinetically stable critical nucleus due to its kinetical stability. We have numerically calculated the time evolution of the number densities of clusters in the case of water vapor nucleation. We employ the condition in which the difference between the size of the thermodynamic crtitical nucleus and that of the kinetic one is appreciable. The results show that the peak does not appear in the number densities of clu...

Strouhal number for free swimming

Science.gov (United States)

Saadat, Mehdi; van Buren, Tyler; Floryan, Daniel; Smits, Alexander; Haj-Hariri, Hossein

2015-11-01

In this work, we present experimental results to explore the implications of free swimming for Strouhal number (as an outcome) in the context of a simple model for a fish that consists of a 2D virtual body (source of drag) and a 2D pitching foil (source of thrust) representing cruising with thunniform locomotion. The results validate the findings of Saadat and Haj-Hariri (2012): for pitching foils thrust coefficient is a function of Strouhal number for all gaits having amplitude less than a certain critical value. Equivalently, given the balance of thrust and drag forces at cruise, Strouhal number is only a function of the shape, i.e. drag coefficient and area, and essentially a constant for high enough swimming speeds for which the mild dependence of drag coefficient on the speed vanishes. Furthermore, a dimensional analysis generalizes the findings. A scaling analysis shows that the variation of Strouhal number with cruising speed is functionally related to the variation of body drag coefficient with speed. Supported by ONR MURI Grant N00014-14-1-0533.

Does the Approximate Number System Serve as a Foundation for Symbolic Mathematics?

Science.gov (United States)

Szkudlarek, Emily; Brannon, Elizabeth M.

2017-01-01

In this article we first review evidence for the approximate number system (ANS), an evolutionarily ancient and developmentally conservative cognitive mechanism for representing number without language. We then critically review five different lines of support for the proposal that symbolic representations of number build upon the ANS, and discuss…

The factors influencing burnout and job satisfaction among critical care nurses: a study of Saudi critical care nurses.

Science.gov (United States)

Alharbi, Jalal; Wilson, Rhonda; Woods, Cindy; Usher, Kim

2016-09-01

The aim of the study was to explore the prevalence of burnout and job satisfaction among Saudi national critical care nurses. Burnout is caused by a number of factors, including personal, organisational and professional issues. Previous literature reports a strong relationship between burnout and job satisfaction among critical care nurses. Little is known about this phenomenon among Saudi national critical care nurses. A convenience sample of 150 Saudi national critical care nurses from three hospitals in Hail, Saudi Arabia were included in a cross-sectional survey. Saudi national critical care registered nurses reported moderate to high levels of burnout in the areas of emotional exhaustion and depersonalisation. Participants also reported a feeling of ambivalence and dissatisfaction with their jobs but were satisfied with the nature of their work. Saudi national critical care nurses experience moderate to high levels of burnout and low levels of job satisfaction. Burnout is a predictor of job satisfaction for Saudi national critical care nurses. These results provide clear evidence of the need for nurse managers and policy makers to devise strategies to help nurses better cope with a stressful work environment, thereby also improving job satisfaction among Saudi national critical care nurses. © 2016 John Wiley & Sons Ltd.

Continuous surface force based lattice Boltzmann equation method for simulating thermocapillary flow

International Nuclear Information System (INIS)

Zheng, Lin; Zheng, Song; Zhai, Qinglan

2016-01-01

In this paper, we extend a lattice Boltzmann equation (LBE) with continuous surface force (CSF) to simulate thermocapillary flows. The model is designed on our previous CSF LBE for athermal two phase flow, in which the interfacial tension forces and the Marangoni stresses as the results of the interface interactions between different phases are described by a conception of CSF. In this model, the sharp interfaces between different phases are separated by a narrow transition layers, and the kinetics and morphology evolution of phase separation would be characterized by an order parameter via Cahn–Hilliard equation which is solved in the frame work of LBE. The scalar convection–diffusion equation for temperature field is resolved by thermal LBE. The models are validated by thermal two layered Poiseuille flow, and two superimposed planar fluids at negligibly small Reynolds and Marangoni numbers for the thermocapillary driven convection, which have analytical solutions for the velocity and temperature. Then thermocapillary migration of two/three dimensional deformable droplet are simulated. Numerical results show that the predictions of present LBE agreed with the analytical solution/other numerical results. - Highlights: • A CSF LBE to thermocapillary flows. • Thermal layered Poiseuille flows. • Thermocapillary migration.

Continuous surface force based lattice Boltzmann equation method for simulating thermocapillary flow

Energy Technology Data Exchange (ETDEWEB)

Zheng, Lin, E-mail: lz@njust.edu.cn [School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Zheng, Song [School of Mathematics and Statistics, Zhejiang University of Finance and Economics, Hangzhou 310018 (China); Zhai, Qinglan [School of Economics Management and Law, Chaohu University, Chaohu 238000 (China)

2016-02-05

In this paper, we extend a lattice Boltzmann equation (LBE) with continuous surface force (CSF) to simulate thermocapillary flows. The model is designed on our previous CSF LBE for athermal two phase flow, in which the interfacial tension forces and the Marangoni stresses as the results of the interface interactions between different phases are described by a conception of CSF. In this model, the sharp interfaces between different phases are separated by a narrow transition layers, and the kinetics and morphology evolution of phase separation would be characterized by an order parameter via Cahn–Hilliard equation which is solved in the frame work of LBE. The scalar convection–diffusion equation for temperature field is resolved by thermal LBE. The models are validated by thermal two layered Poiseuille flow, and two superimposed planar fluids at negligibly small Reynolds and Marangoni numbers for the thermocapillary driven convection, which have analytical solutions for the velocity and temperature. Then thermocapillary migration of two/three dimensional deformable droplet are simulated. Numerical results show that the predictions of present LBE agreed with the analytical solution/other numerical results. - Highlights: • A CSF LBE to thermocapillary flows. • Thermal layered Poiseuille flows. • Thermocapillary migration.

Deformation and rupture of a horizontal liquid layer by thermal and solutal Marangoni flows

Energy Technology Data Exchange (ETDEWEB)

Viviani, Antonio [Seconda Universita di Napoli (SUN), Dipartimento di Ingegneria Aerospaziale e Meccanica (DIAM), via Roma 29, 81031 Aversa (Italy); Zuev, Andrew [Institute of Continuous Media Mechanics, UB Russian Academy of Sciences, Academic Korolev Street 1, 614013 Perm (Russian Federation)

2008-11-15

The evolution of strong surface deformation of a thin viscous fluid layer on a horizontal solid wettable substrate was studied experimentally. Layer deformation is caused by the concentration gradient of surface tension generated by a drop of soluble surfactant placed on the free layer surface. The conditions leading to the layer rupture and drying of the bottom section under the spreading drop were studied. The dependence of the dry spot radius on time, horizontal dimension and thickness of the layer, volume of the introduced droplet and fluids properties, were obtained for various fluid pairs. It was found that the critical initial thickness of the layer, at which its deformation reaches the layer bottom, is practically insensitive to the quantity of the applied surfactant and is defined by the difference in surface tension between the drop and the layer. Comparison of the data with the results of the study of the thermocapillary rupture of a cylindrical layer heated at the center and cooled along the periphery showed good agreement between the dependences of the critical layer thickness on the thermal and the solutal surface tension difference. (author)

A criticality result for polycycles in a family of quadratic reversible centers

Science.gov (United States)

Rojas, D.; Villadelprat, J.

2018-06-01

We consider the family of dehomogenized Loud's centers Xμ = y (x - 1)∂x + (x + Dx2 + Fy2)∂y, where μ = (D , F) ∈R2, and we study the number of critical periodic orbits that emerge or disappear from the polycycle at the boundary of the period annulus. This number is defined exactly the same way as the well-known notion of cyclicity of a limit periodic set and we call it criticality. The previous results on the issue for the family {Xμ , μ ∈R2 } distinguish between parameters with criticality equal to zero (regular parameters) and those with criticality greater than zero (bifurcation parameters). A challenging problem not tackled so far is the computation of the criticality of the bifurcation parameters, which form a set ΓB of codimension 1 in R2. In the present paper we succeed in proving that a subset of ΓB has criticality equal to one.

Feasibility study on heterogeneous method in criticality calculations

International Nuclear Information System (INIS)

Prati, A.

1977-01-01

The criticality of finite heterogeneous assemblies is analysed by the heterogeneous methods employing the Eigen-function analysis. The moderation is treated by the Fermi age theory. The system is analysed in two dimensional rectangular coordinates. The criticality and the fluxes are determined for systems with small and large number of fuel rods. The convergence and the residual error in the modal analysis are discussed. (author)

Effect of geometry structure on critical properties

Science.gov (United States)

Jiang, Qing; Jiang, Xue-fan

1997-02-01

The effective-field renormalization group (EFRG) scheme is utilized to compute critical properties of the transverse Ising model (TIM) in a quantum-spin system. We distinguish differences between lattices of the same coordination number but of different structures and take effects of the first fluctuation correction into account. The improved results for the critical transverse field are obtained for several lattice structures even by considering the smallest possible cluster, which is in good agreement with series results.

Workplace Accidents and Self-Organized Criticality

OpenAIRE

Mauro, John C.; Diehl, Brett; Marcellin, Richard F.; Vaughn, Daniel J.

2018-01-01

The occurrence of workplace accidents is described within the context of self-organized criticality, a theory from statistical physics that governs a wide range of phenomena across physics, biology, geosciences, economics, and the social sciences. Workplace accident data from the U.S. Bureau of Labor Statistics reveal a power-law relationship between the number of accidents and their severity as measured by the number of days lost from work. This power-law scaling is indicative of workplace a...

Reactor Dynamics Experiments with a Sub-Critical Assembly

International Nuclear Information System (INIS)

Miley, G.H.; Yang, Y.; Wu, L.; Momota, H.

2004-01-01

A resurgence in use of nuclear power is now underway worldwide. However due to the shutdown of many university research reactors , student laboratories must rely more heavily on use of sub-critical assemblies. Here a driven sub-critical is described that uses a cylindrical Inertial Electrostatic Confinement (IEC) device to provide a fusion neutron source. The small IEC neutron source would be inserted in a fuel element position, with its power input controlled externally at a control panel. This feature opens the way to use of the critical assembly for a number of transient experiments such as sub-critical pulsing and neutron wave propagation. That in turn adds important new insights and excitement for the student teaching laboratory

Update of the Nuclear Criticality Slide Rule for the Emergency Response to a Nuclear Criticality Accident

Science.gov (United States)

Duluc, Matthieu; Bardelay, Aurélie; Celik, Cihangir; Heinrichs, Dave; Hopper, Calvin; Jones, Richard; Kim, Soon; Miller, Thomas; Troisne, Marc; Wilson, Chris

2017-09-01

AWE (UK), IRSN (France), LLNL (USA) and ORNL (USA) began a long term collaboration effort in 2015 to update the nuclear criticality Slide Rule for the emergency response to a nuclear criticality accident. This document, published almost 20 years ago, gives order of magnitude estimates of key parameters, such as number of fissions and doses (neutron and gamma), useful for emergency response teams and public authorities. This paper will present, firstly the motivation and the long term objectives for this update, then the overview of the initial configurations for updated calculations and preliminary results obtained with modern 3D codes.

Update of the Nuclear Criticality Slide Rule for the Emergency Response to a Nuclear Criticality Accident

Directory of Open Access Journals (Sweden)

Duluc Matthieu

2017-01-01

Full Text Available AWE (UK, IRSN (France, LLNL (USA and ORNL (USA began a long term collaboration effort in 2015 to update the nuclear criticality Slide Rule for the emergency response to a nuclear criticality accident. This document, published almost 20 years ago, gives order of magnitude estimates of key parameters, such as number of fissions and doses (neutron and gamma, useful for emergency response teams and public authorities. This paper will present, firstly the motivation and the long term objectives for this update, then the overview of the initial configurations for updated calculations and preliminary results obtained with modern 3D codes.

Determining the Number of Factors in P-Technique Factor Analysis

Science.gov (United States)

Lo, Lawrence L.; Molenaar, Peter C. M.; Rovine, Michael

2017-01-01

Determining the number of factors is a critical first step in exploratory factor analysis. Although various criteria and methods for determining the number of factors have been evaluated in the usual between-subjects R-technique factor analysis, there is still question of how these methods perform in within-subjects P-technique factor analysis. A…

Free surface deformation and heat transfer by thermocapillary convection

Science.gov (United States)

Fuhrmann, Eckart; Dreyer, Michael; Basting, Steffen; Bänsch, Eberhard

2016-04-01

Knowing the location of the free liquid/gas surface and the heat transfer from the wall towards the fluid is of paramount importance in the design and the optimization of cryogenic upper stage tanks for launchers with ballistic phases, where residual accelerations are smaller by up to four orders of magnitude compared to the gravity acceleration on earth. This changes the driving forces drastically: free surfaces become capillary dominated and natural or free convection is replaced by thermocapillary convection if a non-condensable gas is present. In this paper we report on a sounding rocket experiment that provided data of a liquid free surface with a nonisothermal boundary condition, i.e. a preheated test cell was filled with a cold but storable liquid in low gravity. The corresponding thermocapillary convection (driven by the temperature dependence of the surface tension) created a velocity field directed away from the hot wall towards the colder liquid and then in turn back at the bottom towards the wall. A deformation of the free surface resulting in an apparent contact angle rather different from the microscopic one could be observed. The thermocapillary flow convected the heat from the wall to the liquid and increased the heat transfer compared to pure conduction significantly. The paper presents results of the apparent contact angle as a function of the dimensionless numbers (Weber-Marangoni and Reynolds-Marangoni number) as well as heat transfer data in the form of a Nusselt number. Experimental results are complemented by corresponding numerical simulations with the commercial software Flow3D and the inhouse code Navier.

Thinking Critically about Critical Thinking

Science.gov (United States)

Mulnix, Jennifer Wilson

2012-01-01

As a philosophy professor, one of my central goals is to teach students to think critically. However, one difficulty with determining whether critical thinking can be taught, or even measured, is that there is widespread disagreement over what critical thinking actually is. Here, I reflect on several conceptions of critical thinking, subjecting…

Impegno 3.0. Towards participatory criticism?

Directory of Open Access Journals (Sweden)

Pierpaolo Antonello

2016-04-01

Full Text Available This essay is a general discussion on the possible contours taken by the the notion of impegno in the contemporary Italian context, seen from the point of view of critical and academic practices, particularly in the light of contextual socio-economic, technological and disciplinary changes. While an alignment with the  paradigmatic shift occurred at the international level where a number of studies have been discussing the emancipatory role of literature, cinema, and the media from the point of view of readers and audiences is felt much needed, a paradigmatic refashioning of the critical debate and of the public sphere is currently occurring, which gives rise of new possibilities for critical engagement facilitated by the so-called Web 3.0. This new media-ecology provides fora by which the critical practice is much more horizontal and democratic in nature, while authorship and readership present a more dynamic cross-fertilisation

Comparing Data Sets: Implicit Summaries of the Statistical Properties of Number Sets

Science.gov (United States)

Morris, Bradley J.; Masnick, Amy M.

2015-01-01

Comparing datasets, that is, sets of numbers in context, is a critical skill in higher order cognition. Although much is known about how people compare single numbers, little is known about how number sets are represented and compared. We investigated how subjects compared datasets that varied in their statistical properties, including ratio of…

Critical states and thermomagnetic instabilities in three-dimensional nanostructured superconductors

Energy Technology Data Exchange (ETDEWEB)

Tamegai, T., E-mail: tamegai@ap.t.u-tokyo.ac.jp [Department of Applied Physics, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Mine, A.; Tsuchiya, Y.; Miyano, S.; Pyon, S. [Department of Applied Physics, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Mawatari, Y.; Nagasawa, S.; Hidaka, M. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8568 (Japan)

2017-02-15

Highlights: • Critical state field profiles and thermomagnetic instabilities are studied in three-dimensional nanostructured superconductors. • We find that the critical state field profiles in bi-layer systems are not simple superpositions of critical states in the two layers. • We also studied flux avalanches in shifted strip arrays with layer numbers up to six. • Various forms of avalanches either perpendicular or parallel to the strip are observed when the overlap between layers is large. • We find that introduction of asymmetry to shifted strip arrays affects the shape of flux avalanches sensitively. - Abstract: Critical state field profiles and thermomagnetic instabilities are studied in two kinds of three-dimensional nanostructured superconductors. We find that the critical state field profiles in some simple bi-layer systems are not simple superpositions of critical states in the two layers. Competition between the divergence of the local field at the edges of the film and the shielding by the neighboring layer makes novel critical state field profiles. We also studied flux avalanches in shifted strip arrays (SSAs) with layer numbers up to six. Various forms of avalanches either perpendicular or parallel to the strip are observed when the overlap between strips in neighboring layers is large. We also find that introduction of asymmetry in various forms to SSA affects the shape of flux avalanches sensitively.

Critical technologies research: Opportunities for DOE

Energy Technology Data Exchange (ETDEWEB)

1992-12-01

Recent studies have identified a number of critical technologies that are essential to the nation`s defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy`s Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE`s capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

Critical technologies research: Opportunities for DOE

Energy Technology Data Exchange (ETDEWEB)

1992-12-01

Recent studies have identified a number of critical technologies that are essential to the nation's defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy's Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE's capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

Effects of surface modification on the critical behaviour in multiple-surface-layer ferroelectric thin films

International Nuclear Information System (INIS)

Lu, Z X

2013-01-01

Using the usual mean-field theory approximation, the critical behaviour (i.e. the Curie temperature T c and the critical surface transverse field Ω sc ) in a multiple-surface-layer ferroelectric thin film is studied on the basis of the spin- 1/2 transverse Ising model. The dependence of the Curie temperature T c on the surface transverse field Ω s and the surface layer number N s are discussed in detail. Meanwhile the dependence of the critical surface transverse field Ω sc on the surface layer number N s is also examined. The numerical results indicate that the critical behaviour of ferroelectric thin films is obviously affected by modifications of the surface transverse field Ω s and surface layer number N s .

Heat and mass transfer boundary conditions at the surface of a heated sessile droplet

Science.gov (United States)

Ljung, Anna-Lena; Lundström, T. Staffan

2017-12-01

This work numerically investigates how the boundary conditions of a heated sessile water droplet should be defined in order to include effects of both ambient and internal flow. Significance of water vapor, Marangoni convection, separate simulations of the external and internal flow, and influence of contact angle throughout drying is studied. The quasi-steady simulations are carried out with Computational Fluid Dynamics and conduction, natural convection and Marangoni convection are accounted for inside the droplet. For the studied conditions, a noticeable effect of buoyancy due to evaporation is observed. Hence, the inclusion of moisture increases the maximum velocities in the external flow. Marangoni convection will, in its turn, increase the velocity within the droplet with up to three orders of magnitude. Results furthermore show that the internal and ambient flow can be simulated separately for the conditions studied, and the accuracy is improved if the internal temperature gradient is low, e.g. if Marangoni convection is present. Simultaneous simulations of the domains are however preferred at high plate temperatures if both internal and external flows are dominated by buoyancy and natural convection. The importance of a spatially resolved heat and mass transfer boundary condition is, in its turn, increased if the internal velocity is small or if there is a large variation of the transfer coefficients at the surface. Finally, the results indicate that when the internal convective heat transport is small, a rather constant evaporation rate may be obtained throughout the drying at certain conditions.

Diversity in the Emerging Critical Care Workforce: Analysis of Demographic Trends in Critical Care Fellows From 2004 to 2014.

Science.gov (United States)

Lane-Fall, Meghan B; Miano, Todd A; Aysola, Jaya; Augoustides, John G T

2017-05-01

Diversity in the physician workforce is essential to providing culturally effective care. In critical care, despite the high stakes and frequency with which cultural concerns arise, it is unknown whether physician diversity reflects that of critically ill patients. We sought to characterize demographic trends in critical care fellows, who represent the emerging intensivist workforce. We used published data to create logistic regression models comparing annual trends in the representation of women and racial/ethnic groups across critical care fellowship types. United States Accreditation Council on Graduate Medical Education-approved residency and fellowship training programs. Residents and fellows employed by Accreditation Council on Graduate Medical Education-accredited training programs from 2004 to 2014. None. From 2004 to 2014, the number of critical care fellows increased annually, up 54.1% from 1,606 in 2004-2005 to 2,475 in 2013-2014. The proportion of female critical care fellows increased from 29.5% (2004-2005) to 38.3% (2013-2014) (p workforce reflect underrepresentation of women and racial/ethnic minorities. Trends highlight increases in women and Hispanics and stable or decreasing representation of non-Hispanic underrepresented minority critical care fellows. Further research is needed to elucidate the reasons underlying persistent underrepresentation of racial and ethnic minorities in critical care fellowship programs.

Quantum Critical “Opalescence” around Metal-Insulator Transitions

Science.gov (United States)

Misawa, Takahiro; Yamaji, Youhei; Imada, Masatoshi

2006-08-01

Divergent carrier-density fluctuations equivalent to the critical opalescence of gas-liquid transition emerge around a metal-insulator critical point at a finite temperature. In contrast to the gas-liquid transitions, however, the critical temperatures can be lowered to zero, which offers a challenging quantum phase transition. We present a microscopic description of such quantum critical phenomena in two dimensions. The conventional scheme of phase transitions by Ginzburg, Landau, and Wilson is violated because of its topological nature. It offers a clear insight into the criticalities of metal-insulator transitions (MIT) associated with Mott or charge-order transitions. Fermi degeneracy involving the diverging density fluctuations generates emergent phenomena near the endpoint of the first-order MIT and must shed new light on remarkable phenomena found in correlated metals such as unconventional cuprate superconductors. It indeed accounts for the otherwise puzzling criticality of the Mott transition recently discovered in an organic conductor. We propose to accurately measure enhanced dielectric fluctuations at small wave numbers.

Critical velocity and anaerobic paddling capacity determined by different mathematical models and number of predictive trials in canoe slalom.

Science.gov (United States)

Messias, Leonardo H D; Ferrari, Homero G; Reis, Ivan G M; Scariot, Pedro P M; Manchado-Gobatto, Fúlvia B

2015-03-01

The purpose of this study was to analyze if different combinations of trials as well as mathematical models can modify the aerobic and anaerobic estimates from critical velocity protocol applied in canoe slalom. Fourteen male elite slalom kayakers from Brazilian canoe slalom team (K1) were evaluated. Athletes were submitted to four predictive trials of 150, 300, 450 and 600 meters in a lake and the time to complete each trial was recorded. Critical velocity (CV-aerobic parameter) and anaerobic paddling capacity (APC-anaerobic parameter) were obtained by three mathematical models (Linear1=distance-time; Linear 2=velocity-1/time and Non-Linear = time-velocity). Linear 1 was chosen for comparison of predictive trials combinations. Standard combination (SC) was considered as the four trials (150, 300, 450 and 600 m). High fits of regression were obtained from all mathematical models (range - R² = 0.96-1.00). Repeated measures ANOVA pointed out differences of all mathematical models for CV (p = 0.006) and APC (p = 0.016) as well as R² (p = 0.033). Estimates obtained from the first (1) and the fourth (4) predictive trials (150 m = lowest; and 600 m = highest, respectively) were similar and highly correlated (r=0.98 for CV and r = 0.96 for APC) with the SC. In summary, methodological aspects must be considered in critical velocity application in canoe slalom, since different combinations of trials as well as mathematical models resulted in different aerobic and anaerobic estimates. Key pointsGreat attention must be given for methodological concerns regarding critical velocity protocol applied on canoe slalom, since different estimates were obtained depending on the mathematical model and the predictive trials used.Linear 1 showed the best fits of regression. Furthermore, to the best of our knowledge and considering practical applications, this model is the easiest one to calculate the estimates from critical velocity protocol. Considering this, the abyss between science

The effective delayed neutron fraction for bare-metal criticals

International Nuclear Information System (INIS)

Pearlstein, S.

1999-01-01

Given sufficient material, a large number of actinides could be used to form bare-metal criticals. The effective delayed neutron fraction for a bare critical comprised of a fissile material is comparable with the absolute delayed neutron fraction. The effective delayed neutron fraction for a bare critical composed of a fissionable material is reduced by factors of 2 to 10 when compared with the absolute delayed neutron fraction. When the effective delayed neutron fraction is small, the difference between delayed and prompt criticality is small, and extreme caution must be used in critical assemblies of these materials. This study uses an approximate but realistic model to survey the actinide region to compare effective delayed neutron fractions with absolute delayed neutron fractions

Social Network Analysis and Critical Realism

DEFF Research Database (Denmark)

Buch-Hansen, Hubert

2014-01-01

in relation to established philosophies of science. This article argues that there is a tension between applied and methods-oriented SNA studies, on the one hand, and those addressing the social-theoretical nature and implications of networks, on the other. The former, in many cases, exhibits positivist...... tendencies, whereas the latter incorporate a number of assumptions that are directly compatible with core critical realist views on the nature of social reality and knowledge. This article suggests that SNA may be detached from positivist social science and come to constitute a valuable instrument...... in the critical realist toolbox....

Quench dynamics across quantum critical points

International Nuclear Information System (INIS)

Sengupta, K.; Powell, Stephen; Sachdev, Subir

2004-01-01

We study the quantum dynamics of a number of model systems as their coupling constants are changed rapidly across a quantum critical point. The primary motivation is provided by the recent experiments of Greiner et al. [Nature (London) 415, 39 (2002)] who studied the response of a Mott insulator of ultracold atoms in an optical lattice to a strong potential gradient. In a previous work, it had been argued that the resonant response observed at a critical potential gradient could be understood by proximity to an Ising quantum critical point describing the onset of density wave order. Here we obtain numerical results on the evolution of the density wave order as the potential gradient is scanned across the quantum critical point. This is supplemented by studies of the integrable quantum Ising spin chain in a transverse field, where we obtain exact results for the evolution of the Ising order correlations under a time-dependent transverse field. We also study the evolution of transverse superfluid order in the three-dimensional case. In all cases, the order parameter is best enhanced in the vicinity of the quantum critical point

Hoax News: Promoting the Students’ Critical Thinking in Critical Reading Class

Directory of Open Access Journals (Sweden)

Sri Haryati

2017-12-01

Full Text Available Critical thinking is vital for graduates in facing the dynamic life in order to strengthen their analysis ability and providing alternative solution towards the current problem. It is essential that units, courses, and material teach the critical thinking process have to provide an opportunity for students to excoriate certain problem and present the harmonious flow of thinking. Hoax news, the trending issue in a society as the reading materials, has abundance aspect to be criticized by students. Moreover, it has its own authenticity to be brought into a critical reading class as authentic materials which was not broadly discussed yet. This study aimed at paving the ways to improve the students’ critical thinking skills through reading hoax news. It is conducted to investigate the usage of hoax news in teaching critical reading for undergraduate students as well as particularize how far hoax news can enhance studenst’ critical thinking. This study employed classroom action research design. The subject of the study was the 31 students joining the critical reading class. The data were gotten from observation, document analysis and test. The essay test was the instrument used to assess the students’ critical thinking which later adopted the model of the Holistic Critical Thinking Scoring Rubric (HCTSR. The result of the study showed that using of hoax news significantly improve the students’ critical thinking followed by the development of interpretation, analysis and identification ability. The number students posed strong thinking increased from 6.45% to 72,2%. Using critical thinking can promote students’ high order thinking since it drives students to consider the fact and fake which demanding the high analysis and deep interpretation toward the presented text.   Keywords: Critical thinking, hoax news, teaching materials.  INDONESIAN ABSTRACT  Berpikir kritis merupakan hal yang penting dalam mengahadapi hidup yang dinamis untuk

ICPP criticality event of October 17, 1978. Facts and sequential description of criticality event and precursor events

International Nuclear Information System (INIS)

1979-01-01

On October 17 during the period of approximately 8:15 to 8:40 p.m., a criticality event occurred in the base of IB column, H-100. The inventory of medium short-lived fission products used to determine the number of fissions indicates that the criticality occurred in column H-100 aqueous phase and the sampling of the column wall with counting of the filings clearly indicates that the event occurred in the column base. The events leading up to the accident are described. The event produced no personnel injury, on-or off-site contamination, nor damage to equipment or property

Robustness of critical points in a complex adaptive system: Effects of hedge behavior

Science.gov (United States)

Liang, Yuan; Huang, Ji-Ping

2013-08-01

In our recent papers, we have identified a class of phase transitions in the market-directed resource-allocation game, and found that there exists a critical point at which the phase transitions occur. The critical point is given by a certain resource ratio. Here, by performing computer simulations and theoretical analysis, we report that the critical point is robust against various kinds of human hedge behavior where the numbers of herds and contrarians can be varied widely. This means that the critical point can be independent of the total number of participants composed of normal agents, herds and contrarians, under some conditions. This finding means that the critical points we identified in this complex adaptive system (with adaptive agents) may also be an intensive quantity, similar to those revealed in traditional physical systems (with non-adaptive units).

Universal signatures of fractionalized quantum critical points.

Science.gov (United States)

Isakov, Sergei V; Melko, Roger G; Hastings, Matthew B

2012-01-13

Ground states of certain materials can support exotic excitations with a charge equal to a fraction of the fundamental electron charge. The condensation of these fractionalized particles has been predicted to drive unusual quantum phase transitions. Through numerical and theoretical analysis of a physical model of interacting lattice bosons, we establish the existence of such an exotic critical point, called XY*. We measure a highly nonclassical critical exponent η = 1.493 and construct a universal scaling function of winding number distributions that directly demonstrates the distinct topological sectors of an emergent Z(2) gauge field. The universal quantities used to establish this exotic transition can be used to detect other fractionalized quantum critical points in future model and material systems.

Quantum phase crossovers with finite atom number in the Dicke model

International Nuclear Information System (INIS)

Hirsch, J G; Castaños, O; Nahmad-Achar, E; López-Peña, R

2013-01-01

Two-level atoms interacting with a one-mode cavity field at zero temperature have order parameters which reflect the presence of a quantum phase transition at a critical value of the atom–cavity coupling strength. Two popular examples are the number of photons inside the cavity and the number of excited atoms. Coherent states provide a mean field description, which becomes exact in the thermodynamic limit. Employing symmetry-adapted (SA) SU(2) coherent states the quantum crossover, precursor of the critical behavior, can be described for a finite number of atoms. A variation after projection treatment, involving a numerical minimization of the SA energy surface, associates the quantum crossover with a discontinuity in the order parameters, which originates from competition between two local minima in the SA energy surface. Although this discontinuity is not present in finite systems, it provides a good description of 1/N effects in the observables. (paper)

Critical Thinking in Higher Education: An Annotated Bibliography

Directory of Open Access Journals (Sweden)

Mary Shriner, MLS

2006-08-01

Full Text Available An overwhelming number of books and full-text articles on various databases are available that suggest ways to teach critical thinking. Most educators agree that this skill is becoming increasingly important as classes become more diversified and the curriculum becomes more global. An institution’s library is an often-overlooked faculty development resource; this article offers relevant articles on critical thinking from the many databases available through Park University's McAfee Memorial Library.

Enhancement of critical temperature in fractal metamaterial superconductors

Energy Technology Data Exchange (ETDEWEB)

Smolyaninov, Igor I., E-mail: smoly@umd.edu [Department of Electrical and Computer Engineering, University of Maryland, College Park, MD 20742 (United States); Smolyaninova, Vera N. [Department of Physics Astronomy and Geosciences, Towson University, 8000 York Road, Towson, MD 21252 (United States)

2017-04-15

Fractal metamaterial superconductor geometry has been suggested and analyzed based on the recently developed theoretical description of critical temperature increase in epsilon near zero (ENZ) metamaterial superconductors. Considerable enhancement of critical temperature has been predicted in such materials due to appearance of large number of additional poles in the inverse dielectric response function of the fractal. Our results agree with the recent observation (Fratini et al. Nature 466, 841 (2010)) that fractal defect structure promotes superconductivity.

Ten years of transition Stiglitz's criticism and counterarguments

Directory of Open Access Journals (Sweden)

Đurđević Ljiljana

2004-01-01

Full Text Available IMF supports the transition process in most ex-socialist countries through concessionary financing, recommendations for economic policy and technical assistance. Results vary across countries and have been analyzed by a number of authors. In this context, some authors have dealt with the IMF's "guilt" Stiglitz's criticism having struck the most responsive chord in public triggering violent reactions. The paper deals with the key hypotheses of this criticism as well as the main counter arguments.

Human Capital Theory: A Holistic Criticism

Science.gov (United States)

Tan, Emrullah

2014-01-01

Human capital theory has had a profound impact on a range of disciplines from economics to education and sociology. The theory has always been the subject of bitter criticisms from the very beginning, but it has comfortably survived and expanded its influence over other research disciplines. Not surprisingly, a considerable number of criticisms…

Mechanism of subcooled water flow boiling critical heat flux in a circular tube at high liquid Reynolds number

International Nuclear Information System (INIS)

Hata, K.; Fukuda, K.; Masuzaki, S.

2014-01-01

The subcooled boiling heat transfer and the steady state critical heat flux (CHF) in a vertical circular tube for the flow velocities (u=3.95 to 30.80 m/s) are systematically measured by the experimental water loop comprised of a multistage canned-type circulation pump with high pump head. The SUS304 test tube of inner diameter (d=6 mm) and heated length (L=59.5 mm) is used in this work. The outer surface temperatures of the SUS304 test tube with heating are observed by an infrared thermal imaging camera and a video camera. The subcooled boiling heat transfers for SUS304 test tube are compared with the values calculated by other workers' correlations for the subcooled boiling heat transfer. The influence of flow velocity on the subcooled boiling heat transfer and the CHF is investigated into details based on the experimental data. Nucleate boiling surface superheats at the CHF are close to the lower limit of the heterogeneous spontaneous nucleation temperature and the homogeneous spontaneous nucleation temperature. The dominant mechanism of the subcooled flow boiling CHF on the SUS304 circular tube is discussed at high liquid Reynolds number. On the other hand, theoretical equations for k-ε turbulence model in a circular tube of a 3 mm in diameter and a 526 mm long are numerically solved for heating of water on heated section of a 3 mm in diameter and a 67 mm long with various thicknesses of conductive sub-layer by using PHOENICS code under the same conditions as the experimental ones previously obtained considering the temperature dependence of thermo-physical properties concerned. The Platinum (Pt) test tube of inner diameter (d=3 mm) and heated length (L=66.5 mm) was used in this experiment. The thicknesses of conductive sub-layer from non-boiling regime to CHF are clarified. The thicknesses of conductive sub-layer at the CHF point are evaluated for various flow velocities. The experimental values of the CHF are also compared with the corresponding

Enhanced solar evaporation of water from porous media, through capillary mediated forces and surface treatment

International Nuclear Information System (INIS)

Canbazoglu, F. M.; Fan, B.; Kargar, A.; Vemuri, K.; Bandaru, P. R.

2016-01-01

The relative influence of the capillary, Marangoni, and hydrophobic forces in mediating the evaporation of water from carbon foam based porous media, in response to incident solar radiation, are investigated. It is indicated that inducing hydrophilic interactions on the surface, through nitric acid treatment of the foams, has a similar effect to reduced pore diameter and the ensuing capillary forces. The efficiency of water evaporation may be parameterized through the Capillary number (Ca), with a lower Ca being preferred. The proposed study is of much relevance to efficient solar energy utilization.

Vortex Shedding from Tapered Cylinders at high Reynolds Numbers

DEFF Research Database (Denmark)

Johansson, Jens; Andersen, Michael Styrk; Christensen, Silas Sverre

2015-01-01

percent for strakes of circular cross section. The present paper argues that this height can be reduced for structures where the critical wind velocity for vortex shedding is in the Supercritical Reynolds number regime. The present investigations are aimed for suppressing VIV on offshore wind turbine......^5 (Supercritical). Results indicate that circular strakes with a diameter corresponding to 3 percent of the structures mean diameter can be used to efficiently reduce VIV in the Supercritical Reynolds number regime....

Pediatric Critical Care Telemedicine Program: A Single Institution Review.

Science.gov (United States)

Hernandez, Maria; Hojman, Nayla; Sadorra, Candace; Dharmar, Madan; Nesbitt, Thomas S; Litman, Rebecca; Marcin, James P

2016-01-01

Rural and community emergency departments (EDs) often receive and treat critically ill children despite limited access to pediatric expertise. Increasingly, pediatric critical care programs at children's hospitals are using telemedicine to provide consultations to these EDs with the goal of increasing the quality of care. We conducted a retrospective review of a pediatric critical care telemedicine program at a single university children's hospital. Between the years 2000 and 2014, we reviewed all telemedicine consultations provided to children in rural and community EDs, classified the visits using a comprehensive evidence-based set of chief complaints, and reported the consultations' impact on patient disposition. We also reviewed the total number of pediatric ED visits to calculate the relative frequency with which telemedicine consultations were provided. During the study period, there were 308 consultations provided to acutely ill and/or injured children for a variety of chief complaints, most commonly for respiratory illnesses, acute injury, and neurological conditions. Since inception, the number of consultations has been increasing, as has the number of participating EDs (n = 18). Telemedicine consultations were conducted on 8.6% of seriously ill children, the majority of which resulted in admission to the receiving hospital (n = 150, 49%), with a minority of patients requiring transport to the university children's hospital (n = 103, 33%). This single institutional, university children's hospital-based review demonstrates that a pediatric critical care telemedicine program used to provide consultations to seriously ill children in rural and community EDs is feasible, sustainable, and used relatively infrequently, most typically for the sickest pediatric patients.

How Critical Is Critical Thinking?

Science.gov (United States)

Shaw, Ryan D.

2014-01-01

Recent educational discourse is full of references to the value of critical thinking as a 21st-century skill. In music education, critical thinking has been discussed in relation to problem solving and music listening, and some researchers suggest that training in critical thinking can improve students' responses to music. But what exactly is…

The Critical Exponent is Computable for Automatic Sequences

Directory of Open Access Journals (Sweden)

Jeffrey Shallit

2011-08-01

Full Text Available The critical exponent of an infinite word is defined to be the supremum of the exponent of each of its factors. For k-automatic sequences, we show that this critical exponent is always either a rational number or infinite, and its value is computable. This generalizes or recovers previous results of Krieger and others. Our technique is applicable to other situations; e.g., the computation of the optimal recurrence constant for a linearly recurrent k-automatic sequence.

Status, plans, and capabilities of the Nuclear Criticality Information System

International Nuclear Information System (INIS)

Koponen, B.L.

1984-01-01

The Nuclear Criticality Information System (NCIS), in preparation since 1981, has substantially evolved and now contains a growing number of resources pertinent to nuclear criticality safety. These resources include bibliographic compilations, experimental data, communications media, and the International Directory of Nuclear Criticality Safety Personnel. These resources are part of the LLNL Technology Information System (TIS) which provides the host computer for NCIS. The TIS provides nationwide access to authorized members of the nuclear criticality community via interactive dial-up from computer terminals that utilize communication facilities such as commercial and federal telephone networks, toll-free WATS lines, TYMNET, and the ARPANET/MILNET computer network

KENO IV: an improved Monte Carlo criticality program

International Nuclear Information System (INIS)

Petrie, L.M.; Cross, N.F.

1975-11-01

KENO IV is a multigroup Monte Carlo criticality program written for the IBM 360 computers. It executes rapidly and is flexibly dimensioned so the allowed size of a problem (i.e., the number of energy groups, number of geometry cards, etc., are arbitrary) is limited only by the total data storage required. The input data, with the exception of cross sections, fission spectra and albedos, may be entered in free form. The geometry input is quite simple to prepare and complicated three-dimensional systems can often be described with a minimum of effort. The results calculated by KENO IV include k-effective, lifetime and generation time, energy-dependent leakages and absorptions, energy- and region-dependent fluxes and region-dependent fission densities. Criticality searches can be made on unit dimensions or on the number of units in an array. A summary of the theory utilized by KENO IV, a section describing the logical program flow, a compilation of the error messages printed by the code and a comprehensive data guide for preparing input to the code are presented. 14 references

Determination of the aggregation number for micelles by isothermal titration calorimetry

DEFF Research Database (Denmark)

Olesen, Niels Erik; Holm, Rene; Westh, Peter

2014-01-01

Isothermal titration calorimetry (ITC) has previously been applied to estimate the aggregation number (n), Gibbs free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) of micellization. However, some difficulties of micelle characterization by ITC still remain; most micelles have aggregation numbers...... insight into optimal design of titration protocols for micelle characterization. By applying the new method, the aggregation number of sodium dodecyl sulphate and glycochenodeoxycholate was determined at concentrations around their critical micelle concentration (CMC)...

Plant critical concept

International Nuclear Information System (INIS)

O'Regan, P.J.

1995-01-01

The achievement of operation and maintenance (O ampersand M) cost reductions is a prime concern for plant operators. Initiatives by the nuclear industry to address this concern are under way and/or in development. These efforts include plant reliability studies, reliability-centered maintenance, risk ranking and testing philosophies, performance-based testing philosophies, graded quality assurance, and so forth. This paper presents the results of an effort to develop a methodology that integrates and applies the common data and analysis requirements for a number of risk-based and performance-based initiatives. This initial phase of the effort applied the methodology and its results to two initiatives. These were the procurement function and the preventive maintenance function. This effort integrated multiple programs and functions to identify those components that are truly critical from an integrated plant performance perspective. The paper describes the scope of the effort, the development of a methodology to identify plant critical components, and the application of these results to the maintenance rule compliance, preventive maintenance, and procurement functions at the candidate plant

Critical impact energy for the perforation of metallic plates

International Nuclear Information System (INIS)

Aly, S.Y.; Li, Q.M.

2008-01-01

This paper investigates the empirical formulae used in engineering practice to predict the critical perforation energy of metallic plates struck by rigid projectiles in the sub-ordnance regime. Main factors affecting the critical perforation energy are identified and valid conditions for each empirical formula are compared. Dimensional analysis is conducted to show the dependence of the non-dimensional critical impact energy on other influential non-dimensional numbers. Available empirical formulae are re-expressed in non-dimensional forms. A modified Jowett/AEA equation is proposed to predict the critical perforation energy of a flat-ended short projectile. The present work increases the confidence of using these empirical formulae and can be regarded as a quick guide for ballistic protection design of metallic shields and steel armour plates

Data collapse and critical dynamics in neuronal avalanche data

Science.gov (United States)

Butler, Thomas; Friedman, Nir; Dahmen, Karin; Beggs, John; Deville, Lee; Ito, Shinya

2012-02-01

The tasks of information processing, computation, and response to stimuli require neural computation to be remarkably flexible and diverse. To optimally satisfy the demands of neural computation, neuronal networks have been hypothesized to operate near a non-equilibrium critical point. In spite of their importance for neural dynamics, experimental evidence for critical dynamics has been primarily limited to power law statistics that can also emerge from non-critical mechanisms. By tracking the firing of large numbers of synaptically connected cortical neurons and comparing the resulting data to the predictions of critical phenomena, we show that cortical tissues in vitro can function near criticality. Among the most striking predictions of critical dynamics is that the mean temporal profiles of avalanches of widely varying durations are quantitatively described by a single universal scaling function (data collapse). We show for the first time that this prediction is confirmed in neuronal networks. We also show that the data have three additional features predicted by critical phenomena: approximate power law distributions of avalanche sizes and durations, samples in subcritical and supercritical phases, and scaling laws between anomalous exponents.

Characterization of neutron leakage probability, k /SUB eff/ , and critical core surface mass density of small reactor assemblies through the Trombay criticality formula

International Nuclear Information System (INIS)

Kumar, A.; Rao, K.S.; Srinivasan, M.

1983-01-01

The Trombay criticality formula (TCF) has been derived by incorporating a number of well-known concepts of criticality physics to enable prediction of changes in critical size or k /SUB eff/ following alterations in geometrical and physical parameters of uniformly reflected small reactor assemblies characterized by large neutron leakage from the core. The variant parameters considered are size, shape, density and diluent concentration of the core, and density and thickness of the reflector. The effect of these changes (except core size) manifests, through sigma /SUB c/ the critical surface mass density of the ''corresponding critical core,'' that sigma, the massto-surface-area ratio of the core,'' is essentially a measure of the product /rho/ extended to nonspherical systems and plays a dominant role in the TCF. The functional dependence of k /SUB eff/ on sigma/sigma /SUB c/ , the system size relative to critical, is expressed in the TCF through two alternative representations, namely the modified Wigner rational form and, an exponential form, which is given

Direct modification of silicon surface by nanosecond laser interference lithography

Energy Technology Data Exchange (ETDEWEB)

Wang, Dapeng [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Wang, Zuobin, E-mail: wangz@cust.edu.cn [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Zhang, Ziang [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); Yue, Yong [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Li, Dayou [JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Maple, Carsten [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom)

2013-10-01

Periodic and quasi-periodic structures on silicon surface have numerous significant applications in photoelectronics and surface engineering. A number of technologies have been developed to fabricate the structures in various research fields. In this work, we take the strategy of direct nanosecond laser interference lithography technology, and focus on the silicon material to create different well-defined surface structures based on theoretical analysis of the formation of laser interference patterns. Two, three and four-beam laser interference systems were set up to fabricate the grating, regular triangle and square structures on silicon surfaces, respectively. From the AFM micrographs, the critical features of structures have a dependence on laser fluences. For a relative low laser fluence, grating and dot structures formed with bumps due to the Marangoni Effect. With the increase of laser fluences, melt and evaporation behaviors can be responsible for the laser modification. By properly selecting the process parameters, well-defined grating and dot structures can been achieved. It can be demonstrated that direct laser interference lithography is a facile and efficient technology with the advantage of a single process procedure over macroscale areas for the fabrication of micro and nano structures.

A fundamental study of a variable critical nozzle flow

International Nuclear Information System (INIS)

Kim, Jea Hyung; Kim, Heuy Dong; Park, Kyung Am

2003-01-01

The mass flow rate of gas flow through critical nozzle depends on the nozzle supply conditions and the cross-sectional area at the nozzle throat. In order that the critical nozzle can be operated at a wide range of supply conditions, the nozzle throat diameter should be controlled to change the flow passage area. This can be achieved by means of a variable critical nozzle. In the present study, both experimental and computational works are performed to develop variable critical nozzle. A cone-cylinder with a diameter of d is inserted into conventional critical nozzle. It can move both upstream and downstream, thereby changing the cross-sectional area of the nozzle throat. Computational work using the axisymmetric, compressible Navier-Stokes equations is carried out to simulate the variable critical nozzle flow. An experiment is performed to measure the mass flow rate through variable critical nozzle. The present computational results are in close agreement with measured ones. The boundary layer displacement and momentum thickness are given as a function of Reynolds number. An empirical equation is obtained to predict the discharge coefficient of variable critical nozzle

Thermo capillary and buoyancy convection in a fluid locally heated on its free surface; Convection thermocapillaire et thermogravitaire dans un fluide chauffe localement sur sa surface libre

Energy Technology Data Exchange (ETDEWEB)

Favre, E.

1997-09-26

coupled buoyancy and thermo-capillary convection lead to a convective motion of the interface liquid/gas which drastically changes the heat and mass transfer across the liquid layer. Two experiments were considered, depending on the fluid: oil or mercury. The liquid is set in a cooled cylindrical vessel, and heated by a heat flux across the center of the free surface. The basic flow, in the case of oil, is a torus. When the heat parameter increases, a stationary flow appears as petals or rays when the aspect ratio. The lateral confinement selects the azimuthal wavelength. In the case of petals-like flow, a sub-critical Hopf bifurcation is underlined. The turbulence is found to be `weak`, even for the largest values of the Marangoni number (Ma = 1.3 10{sup 5}). In the case of mercury, the thermo-capillary effect is reduced to zero to impurities at the surface which have special trajectories we describe and compare to a simpler experiment. Only the buoyancy forces induce a unstationary, weakly turbulent flow as soon as the heating power exceeds 4W (Ra = 4.5 10{sup 3}, calculated with h = 1 mm). The past part concerns the analysis of the effect on the flow of the boundary conditions, the geometry, the Prandtl number and the buoyancy force with the help of the literature. Results concerning heat transfer, in particular the exponent of the law Nusselt number vs. heating power, were compared with available data. (author) 115 refs.

A Parametric Study of a Constant-Mach-Number MHD Generator with Nuclear Ionization

International Nuclear Information System (INIS)

Braun, J.

1965-03-01

The influence of electrical and gas dynamical parameters on the length, of a linear constant-Mach-number MHD duct has been investigated. The gas has been assumed to be ionized by neutron irradiation in the expansion nozzle preceding the MHD duct. Inside the duct the electron recombination is assumed to be governed, by volume recombination. It is found that there exists a distinct domain from which the parameters must be chosen, pressure and Mach number being the most critical ones. If power densities in the order of magnitude 100 MW/m 3 are desired, high magnetic fields and Mach numbers in the supersonic range are needed. The influence of the variation of critical parameters on the channel length is given as a product of simple functions, each containing one parameter

A Parametric Study of a Constant-Mach-Number MHD Generator with Nuclear Ionization

Energy Technology Data Exchange (ETDEWEB)

Braun, J

1965-03-15

The influence of electrical and gas dynamical parameters on the length, of a linear constant-Mach-number MHD duct has been investigated. The gas has been assumed to be ionized by neutron irradiation in the expansion nozzle preceding the MHD duct. Inside the duct the electron recombination is assumed to be governed, by volume recombination. It is found that there exists a distinct domain from which the parameters must be chosen, pressure and Mach number being the most critical ones. If power densities in the order of magnitude 100 MW/m{sup 3} are desired, high magnetic fields and Mach numbers in the supersonic range are needed. The influence of the variation of critical parameters on the channel length is given as a product of simple functions, each containing one parameter.

Critical reading and critical thinking Critical reading and critical thinking

Directory of Open Access Journals (Sweden)

Loni Kreis Taglieber

2008-04-01

Full Text Available The purpose of this paper is to provide, for L1 and L2 reading and writing teachers, a brief overview of the literature about critical reading and higher level thinking skills. The teaching of these skills is still neglected in some language classes in Brazil, be it in L1 or in L2 classes. Thus, this paper may also serve as a resource guide for L1 and/or L2 reading and writing teachers who want to incorporate critical reading and thinking into their classes. In modern society, even in everyday life people frequently need to deal with complicated public and political issues, make decisions, and solve problems. In order to do this efficiently and effectively, citizens must be able to evaluate critically what they see, hear, and read. Also, with the huge amount of printed material available in all areas in this age of “information explosion” it is easy to feel overwhelmed. But often the information piled up on people’s desks and in their minds is of no use due to the enormous amount of it. The purpose of this paper is to provide, for L1 and L2 reading and writing teachers, a brief overview of the literature about critical reading and higher level thinking skills. The teaching of these skills is still neglected in some language classes in Brazil, be it in L1 or in L2 classes. Thus, this paper may also serve as a resource guide for L1 and/or L2 reading and writing teachers who want to incorporate critical reading and thinking into their classes. In modern society, even in everyday life people frequently need to deal with complicated public and political issues, make decisions, and solve problems. In order to do this efficiently and effectively, citizens must be able to evaluate critically what they see, hear, and read. Also, with the huge amount of printed material available in all areas in this age of “information explosion” it is easy to feel overwhelmed. But often the information piled up on people’s desks and in their minds is of

EMPOWERING NON-NATIVE ENGLISH SPEAKING TEACHERS THROUGH CRITICAL PEDAGOGY

Directory of Open Access Journals (Sweden)

Nur Hayati

2010-02-01

Full Text Available Critical pedagogy is a teaching approach that aims to develop students’ critical thinking, political and social awareness, and self esteem through dialogue learning and reflection. Related to the teaching of EFL, this pedagogy holds the potential to empower non native English speaking teachers (NNESTs when incorporated into English teacher education programs. It can help aspiring NNESTs to grow awareness of the political and sociocultural implications of EFL teaching, to foster their critical thinking on any concepts or ideas regarding their profession, and more importantly, to recognize their strengths as NNESTs. Despite the potential, the role of critical pedagogy in improving EFL teacher education program in Indonesia has not been sufficiently discussed. This article attempts to contribute to the discussion by looking at a number of ways critical pedagogy can be incorporated in the programs, the rationale for doing so, and the challenges that might come on the way.

Pasteurised milk and implementation of HACCP (Hazard Analysis Critical Control Point

Directory of Open Access Journals (Sweden)

T.B Murdiati

2004-10-01

Full Text Available The purpose of pasteurisation is to destroy pathogen bacteria without affecting the taste, flavor, and nutritional value. A study on the implementation of HACCP (Hazard Analysis Critical Control Point in producing pasteurized milk was carried out in four processing unit of pasteurised milk, one in Jakarta, two in Bandung and one in Bogor. The critical control points in the production line were identified. Milk samples were collected from the critical points and were analysed for the total number of microbes. Antibiotic residues were detected on raw milks. The study indicated that one unit in Bandung dan one unit in Jakarta produced pasteurized milk with lower number of microbes than the other units, due to better management and control applied along the chain of production. Penisilin residues was detected in raw milk used by unit in Bogor. Six critical points and the hazard might arise in those points were identified, as well as how to prevent the hazards. Quality assurance system such as HACCP would be able to produce high quality and safety of pasteurised milk, and should be implemented gradually.

Fluctuations in non-ideal pion gas with dynamically fixed particle number

Science.gov (United States)

Kolomeitsev, E. E.; Voskresensky, D. N.

2018-05-01

We consider a non-ideal hot pion gas with the dynamically fixed number of particles in the model with the λϕ4 interaction. The effective Lagrangian for the description of such a system is obtained after dropping the terms responsible for the change of the total particle number. Reactions π+π- ↔π0π0, which determine the isospin balance of the medium, are permitted. Within the self-consistent Hartree approximation we compute the effective pion mass, thermodynamic characteristics of the system and the variance of the particle number at temperatures above the critical point of the induced Bose-Einstein condensation when the pion chemical potential reaches the value of the effective pion mass. We analyze conditions for the condensate formation in the process of thermalization of an initially non-equilibrium pion gas. The normalized variance of the particle number increases with a temperature decrease but remains finite in the critical point of the Bose-Einstein condensation. This is due to the non-perturbative account of the interaction and is in contrast to the ideal-gas case. In the kinetic regime of the condensate formation the variance is shown to stay finite also.

Criticism and Counter-Criticism of Public Management: Strategy Models

OpenAIRE

Luis C. Ortigueira

2007-01-01

Critical control is very important in scientific management. This paper presents models of critical and counter-critical public-management strategies, focusing on the types of criticism and counter-criticism manifested in parliamentary political debates. The paper includes: (i) a normative model showing how rational criticism can be carried out; (ii) a normative model for oral critical intervention; and (iii) a general motivational strategy model for criticisms and counter-criticisms. The pap...

Washing and chilling as critical control points in pork slaughter hazard analysis and critical control point (HACCP) systems.

Science.gov (United States)

Bolton, D J; Pearce, R A; Sheridan, J J; Blair, I S; McDowell, D A; Harrington, D

2002-01-01

The aim of this research was to examine the effects of preslaughter washing, pre-evisceration washing, final carcass washing and chilling on final carcass quality and to evaluate these operations as possible critical control points (CCPs) within a pork slaughter hazard analysis and critical control point (HACCP) system. This study estimated bacterial numbers (total viable counts) and the incidence of Salmonella at three surface locations (ham, belly and neck) on 60 animals/carcasses processed through a small commercial pork abattoir (80 pigs d(-1)). Significant reductions (P HACCP in pork slaughter plants. This research will provide a sound scientific basis on which to develop and implement effective HACCP in pork abattoirs.

CARNAC, Neutron Flux and Neutron Spectra in Criticality Accident

International Nuclear Information System (INIS)

Bessis, J.

1976-01-01

Nature of physical problem solved: Calculation of flux and neutron spectra in the case of a criticality accident. The method is unsophisticated but fast. The program is divided into two parts: (1) The code CRITIC is based on the Fermi age equation and evaluates the neutron number per fission emitted from a moderate critical system and its energy spectrum. (2) The code NARCISSE uses concrete current albedo, evaluates the product of neutron reflection on walls of the source containment and calculates the resulting flux at any point, and its energy distribution into 21 groups. The results obtained seem satisfactory, if compared with a Monte Carlo program

Superconducting critical temperature under pressure

Science.gov (United States)

González-Pedreros, G. I.; Baquero, R.

2018-05-01

The present record on the critical temperature of a superconductor is held by sulfur hydride (approx. 200 K) under very high pressure (approx. 56 GPa.). As a consequence, the dependence of the superconducting critical temperature on pressure became a subject of great interest and a high number of papers on of different aspects of this subject have been published in the scientific literature since. In this paper, we calculate the superconducting critical temperature as a function of pressure, Tc(P), by a simple method. Our method is based on the functional derivative of the critical temperature with the Eliashberg function, δTc(P)/δα2F(ω). We obtain the needed coulomb electron-electron repulsion parameter, μ*(P) at each pressure in a consistent way by fitting it to the corresponding Tc using the linearized Migdal-Eliashberg equation. This method requires as input the knowledge of Tc at the starting pressure only. It applies to superconductors for which the Migdal-Eliashberg equations hold. We study Al and β - Sn two weak-coupling low-Tc superconductors and Nb, the strong coupling element with the highest critical temperature. For Al, our results for Tc(P) show an excellent agreement with the calculations of Profeta et al. which are known to agree well with experiment. For β - Sn and Nb, we found a good agreement with the experimental measurements reported in several works. This method has also been applied successfully to PdH elsewhere. Our method is simple, computationally light and gives very accurate results.

Battery-Aware Scheduling of Mixed Criticality Systems

DEFF Research Database (Denmark)

Wognsen, Erik Ramsgaard; Hansen, Rene Rydhof; Larsen, Kim Guldstrand

2014-01-01

. Mixed criticality and soft real-time systems may accept deadline violations and therefore enable trade-offs and evaluation of performance by criteria such as the number of tasks that can be completed with a given battery. We model a task set in combination with the kinetic battery model as a stochastic...

Coupling-matrix approach to the Chern number calculation in disordered systems

International Nuclear Information System (INIS)

Zhang Yi-Fu; Ju Yan; Sheng Li; Shen Rui; Xing Ding-Yu; Yang Yun-You; Sheng Dong-Ning

2013-01-01

The Chern number is often used to distinguish different topological phases of matter in two-dimensional electron systems. A fast and efficient coupling-matrix method is designed to calculate the Chern number in finite crystalline and disordered systems. To show its effectiveness, we apply the approach to the Haldane model and the lattice Hofstadter model, and obtain the correct quantized Chern numbers. The disorder-induced topological phase transition is well reproduced, when the disorder strength is increased beyond the critical value. We expect the method to be widely applicable to the study of topological quantum numbers. (rapid communication)

Thinking Critically about Critical Thinking: Integrating Online Tools to Promote Critical Thinking

Directory of Open Access Journals (Sweden)

B. Jean Mandernach

2006-01-01

Full Text Available The value and importance of critical thinking is clearly established; the challenge for instructors lies in successfully promoting students’ critical thinking skills within the confines of a traditional classroom experience. Since instructors are faced with limited student contact time to meet their instructional objectives and facilitate learning, they are often forced to make instructional decisions between content coverage, depth of understanding, and critical analysis of course material. To address this dilemma, it is essential to integrate instructional strategies and techniques that can efficiently and effectively maximize student learning and critical thinking. Modern advances in educational technology have produced a range of online tools to assist instructors in meeting this instructional goal. This review will examine the theoretical foundations of critical thinking in higher education, discuss empirically-based strategies for integrating online instructional supplements to enhance critical thinking, offer techniques for expanding instructional opportunities outside the limitations of traditional class time, and provide practical suggestions for the innovative use of critical thinking strategies via online resources.

The Critical Point Entanglement and Chaos in the Dicke Model

Directory of Open Access Journals (Sweden)

Lina Bao

2015-07-01

Full Text Available Ground state properties and level statistics of the Dicke model for a finite number of atoms are investigated based on a progressive diagonalization scheme (PDS. Particle number statistics, the entanglement measure and the Shannon information entropy at the resonance point in cases with a finite number of atoms as functions of the coupling parameter are calculated. It is shown that the entanglement measure defined in terms of the normalized von Neumann entropy of the reduced density matrix of the atoms reaches its maximum value at the critical point of the quantum phase transition where the system is most chaotic. Noticeable change in the Shannon information entropy near or at the critical point of the quantum phase transition is also observed. In addition, the quantum phase transition may be observed not only in the ground state mean photon number and the ground state atomic inversion as shown previously, but also in fluctuations of these two quantities in the ground state, especially in the atomic inversion fluctuation.

An Integrative Review of the Concealed Connection: Nurse Educators' Critical Thinking.

Science.gov (United States)

Raymond, Christy; Profetto-McGrath, Joanne; Myrick, Florence; Strean, William B

2017-11-01

The role of nurse educators in the development of students' critical thinking has been overlooked despite the emphasized need for effective teaching methods. An integrative review was performed to examine both quantitative and qualitative research published from 2000 to 2015 related to nurse educators' critical thinking. Many barriers and facilitators existing on individual, interpersonal, and contextual levels affected nurse educators' critical thinking. Various tools have been used to measure nurse educators' critical thinking. This review also highlighted the continued lack of a consensus definition of critical thinking and the limited presence of conceptual models to guide the use of critical thinking in nursing education. Continued examination of nurse educators' critical thinking is needed, given the limited number of studies that have been completed. Much needs to be explored further, including conceptualizations of critical thinking and confirmation of emerging themes identified in this review. [J Nurs Educ. 2017;56(11):648-654.]. © 2017 Raymond, Profetto-McGrath, Myrick, et al.

A Review of Critical Conditions for the Onset of Nonlinear Fluid Flow in Rock Fractures

Directory of Open Access Journals (Sweden)

Liyuan Yu

2017-01-01

Full Text Available Selecting appropriate governing equations for fluid flow in fractured rock masses is of special importance for estimating the permeability of rock fracture networks. When the flow velocity is small, the flow is in the linear regime and obeys the cubic law, whereas when the flow velocity is large, the flow is in the nonlinear regime and should be simulated by solving the complex Navier-Stokes equations. The critical conditions such as critical Reynolds number and critical hydraulic gradient are commonly defined in the previous works to quantify the onset of nonlinear fluid flow. This study reviews the simplifications of governing equations from the Navier-Stokes equations, Stokes equation, and Reynold equation to the cubic law and reviews the evolutions of critical Reynolds number and critical hydraulic gradient for fluid flow in rock fractures and fracture networks, considering the influences of shear displacement, normal stress and/or confining pressure, fracture surface roughness, aperture, and number of intersections. This review provides a reference for the engineers and hydrogeologists especially the beginners to thoroughly understand the nonlinear flow regimes/mechanisms within complex fractured rock masses.

Condensation heat transfer correlation for water-ethanol vapor mixture flowing through a plate heat exchanger

Science.gov (United States)

Zhou, Weiqing; Hu, Shenhua; Ma, Xiangrong; Zhou, Feng

2018-04-01

Condensation heat transfer coefficient (HTC) as a function of outlet vapor quality was investigated using water-ethanol vapor mixture of different ethanol vapor concentrations (0%, 1%, 2%, 5%, 10%, 20%) under three different system pressures (31 kPa, 47 kPa, 83 kPa). A heat transfer coefficient was developed by applying multiple linear regression method to experimental data, taking into account the dimensionless numbers which represents the Marangoni condensation effects, such as Re, Pr, Ja, Ma and Sh. The developed correlation can predict the condensation performance within a deviation range from -22% to 32%. Taking PHE's characteristic into consideration and bringing in Ma number and Sh number, a new correlation was developed, which showed a much more accurate prediction, within a deviation from -3.2% to 7.9%.

Critical Success Factors in Online Language Learning

Science.gov (United States)

Alberth

2011-01-01

With the proliferation of online courses nowadays, it is necessary to ask what defines the success of teaching and learning in these new learning environments exactly. This paper identifies and critically discusses a number of factors for successful implementation of online delivery, particularly as far as online language learning is concerned.…

Variations in Financial Performance among Peer Groups of Critical Access Hospitals

Science.gov (United States)

Pink, George H.; Holmes, George M.; Thompson, Roger E.; Slifkin, Rebecca T.

2007-01-01

Context: Among the large number of hospitals with critical access hospital (CAH) designation, there is substantial variation in facility revenue as well as the number and types of services provided. If these variations have material effects on financial indicators, then performance comparisons among all CAHs are problematic. Purpose: To…

Critical/non-critical system methodology report

International Nuclear Information System (INIS)

1989-01-01

The method used to determine how the waste Isolation Pilot Plant (WIPP) facilities/systems were classified as critical or non-critical to the receipt of CH waste is described within this report. All WIPP critical facilities/systems are listed in the Operational Readiness Review Dictionary. Using the Final Safety Analysis Report (FSAR) as a guide to define the boundaries of the facilities/systems, a direct correlation of the ORR Dictionary to the FSAR can be obtained. The critical facilities/systems are those which are directly related to or have a critical support role in the receipt of CH waste. The facility/systems must meet one of the following requirements to be considered critical: (a) confinement or measure of the release of radioactive materials; (b) continued receipt and/or storage of transuranic waste (TRU) without an interruption greater than one month according to the shipping plan schedule; (c) the environmental and occupational safety of personnel meets the established site programs; and (d) the physical security of the WIPP facilities

Coexistence of critical orbit types in sub-hyperbolic polynomial maps

OpenAIRE

Poirier, Alfredo

1994-01-01

We establish necessary and sufficient conditions for the realization of mapping schemata as post-critically finite polynomials, or more generally, as post-critically finite polynomial maps from a finite union of copies of the complex numbers {\\bf C} to itself which have degree two or more in each copy. As a consequence of these results we prove a transitivity relation between hyperbolic components in parameter space which was conjectured by Milnor.

Critical Dynamics of Burst Instabilities in the Portevin-Le Chatelier Effect

International Nuclear Information System (INIS)

D'Anna, Gianfranco; Nori, Franco

2000-01-01

We investigate the Portevin-Le Chatelier effect (PLC), by compressing Al-Mg alloys in a very large deformation range, and interpret the results from the viewpoint of phase transitions and critical phenomena. The system undergoes two dynamical phase transitions between intermittent (or ''jerky'') and ''laminar'' plastic dynamic phases. Near these two dynamic critical points, the order parameter 1/τ of the PLC effect exhibits large fluctuations, and ''critical slowing down'' (i.e., the number τ of bursts, or plastic instabilities, per unit time slows down considerably)

Criticality safety engineering at the Savannah River Site - the 1990s

International Nuclear Information System (INIS)

Chandler, J.R.; Apperson, C.E. Jr.

1996-01-01

The privatization and downsizing effort that is ongoing within the U.S. Department of Energy (DOE) is requiring a change in the management of criticality safety engineering resources at the Savannah River Site (SRS). Downsizing affects the number of criticality engineers employed by the prime contractor, Westinghouse Savannah River Company (WSRC), and privatization affects the manner in which business is conducted. In the past, criticality engineers at the SRS have been part of the engineering organizations that support each facility handling fissile material. This practice led to different criticality safety engineering organizations dedicated to fuel fabrication activities, reactor loading and unloading activities, separation and waste management operations, and research and development

Molecular dynamics simulations of diffusion and clustering along critical isotherms of medium-chain n-alkanes.

Science.gov (United States)

Mutoru, J W; Smith, W; O'Hern, C S; Firoozabadi, A

2013-01-14

Understanding the transport properties of molecular fluids in the critical region is important for a number of industrial and natural systems. In the literature, there are conflicting reports on the behavior of the self diffusion coefficient D(s) in the critical region of single-component molecular systems. For example, D(s) could decrease to zero, reach a maximum, or remain unchanged and finite at the critical point. Moreover, there is no molecular-scale understanding of the behavior of diffusion coefficients in molecular fluids in the critical regime. We perform extensive molecular dynamics simulations in the critical region of single-component fluids composed of medium-chain n-alkanes-n-pentane, n-decane, and n-dodecane-that interact via anisotropic united-atom potentials. For each system, we calculate D(s), and average molecular cluster sizes κ(cl) and numbers N(cl) at various cluster lifetimes τ, as a function of density ρ in the range 0.2ρ(c) ≤ ρ ≤ 2.0ρ(c) at the critical temperature T(c). We find that D(s) decreases with increasing ρ but remains finite at the critical point. Moreover, for any given τ critical point.

Thermocapillarity in Microfluidics—A Review

Directory of Open Access Journals (Sweden)

Alireza Karbalaei

2016-01-01

Full Text Available This paper reviews the past and recent studies on thermocapillarity in relation to microfluidics. The role of thermocapillarity as the change of surface tension due to temperature gradient in developing Marangoni flow in liquid films and conclusively bubble and drop actuation is discussed. The thermocapillary-driven mass transfer (the so-called Benard-Marangoni effect can be observed in liquid films, reservoirs, bubbles and droplets that are subject to the temperature gradient. Since the contribution of a surface tension-driven flow becomes more prominent when the scale becomes smaller as compared to a pressure-driven flow, microfluidic applications based on thermocapillary effect are gaining attentions recently. The effect of thermocapillarity on the flow pattern inside liquid films is the initial focus of this review. Analysis of the relation between evaporation and thermocapillary instability approves the effect of Marangoni flow on flow field inside the drop and its evaporation rate. The effect of thermocapillary on producing Marangoni flow inside drops and liquid films, leads to actuation of drops and bubbles due to the drag at the interface, mass conservation, and also gravity and buoyancy in vertical motion. This motion can happen inside microchannels with a closed multiphase medium, on the solid substrate as in solid/liquid interaction, or on top of a carrier liquid film in open microfluidic systems. Various thermocapillary-based microfluidic devices have been proposed and developed for different purposes such as actuation, sensing, trapping, sorting, mixing, chemical reaction, and biological assays throughout the years. A list of the thermocapillary based microfluidic devices along with their characteristics, configurations, limitations, and improvements are presented in this review.

Providing care for critically ill surgical patients: challenges and recommendations.

Science.gov (United States)

Tisherman, Samuel A; Kaplan, Lewis; Gracias, Vicente H; Beilman, Gregory J; Toevs, Christine; Byrnes, Matthew C; Coopersmith, Craig M

2013-07-01

Providing optimal care for critically ill and injured surgical patients will become more challenging with staff shortages for surgeons and intensivists. This white paper addresses the historical issues behind the present situation, the need for all intensivists to engage in dedicated critical care per the intensivist model, and the recognition that intensivists from all specialties can provide optimal care for the critically ill surgical patient, particularly with continuing involvement by the surgeon of record. The new acute care surgery training paradigm (including trauma, surgical critical care, and emergency general surgery) has been developed to increase interest in trauma and surgical critical care, but the number of interested trainees remains too few. Recommendations are made for broadening the multidisciplinary training and practice opportunities in surgical critical care for intensivists from all base specialties and for maintaining the intensivist model within acute care surgery practice. Support from academic and administrative leadership, as well as national organizations, will be needed.

Universal critical wrapping probabilities in the canonical ensemble

Directory of Open Access Journals (Sweden)

Hao Hu

2015-09-01

Full Text Available Universal dimensionless quantities, such as Binder ratios and wrapping probabilities, play an important role in the study of critical phenomena. We study the finite-size scaling behavior of the wrapping probability for the Potts model in the random-cluster representation, under the constraint that the total number of occupied bonds is fixed, so that the canonical ensemble applies. We derive that, in the limit L→∞, the critical values of the wrapping probability are different from those of the unconstrained model, i.e. the model in the grand-canonical ensemble, but still universal, for systems with 2yt−d>0 where yt=1/ν is the thermal renormalization exponent and d is the spatial dimension. Similar modifications apply to other dimensionless quantities, such as Binder ratios. For systems with 2yt−d≤0, these quantities share same critical universal values in the two ensembles. It is also derived that new finite-size corrections are induced. These findings apply more generally to systems in the canonical ensemble, e.g. the dilute Potts model with a fixed total number of vacancies. Finally, we formulate an efficient cluster-type algorithm for the canonical ensemble, and confirm these predictions by extensive simulations.

Critical phenomena and chemical potential of a charged AdS black hole

Science.gov (United States)

Wei, Shao-Wen; Liang, Bin; Liu, Yu-Xiao

2017-12-01

Inspired by the interpretation of the cosmological constant from the boundary gauge theory, we here treat it as the number of colors N and its conjugate quantity as the associated chemical potential μ in the black hole side. Then the thermodynamics and the chemical potential for a five-dimensional charged AdS black hole are studied. It is found that there exists a small-large black hole phase transition of van der Waals type. The critical phenomena are investigated in the N2-μ chart. The result implies that the phase transition can occur for large number of colors N , while is forbidden for small number. This to some extent implies that the interaction of the system increases with the number. In particular, in the reduced parameter space, all the thermodynamic quantities can be rescaled with the black hole charge such that these reduced quantities are charge-independent. Then we obtain the coexistence curve and the phase diagram. The latent heat is also numerically calculated. Moreover, the heat capacity and the thermodynamic scalar are studied. The result indicates that the information of the first-order black hole phase transition is encoded in the heat capacity and scalar. However, the phase transition point cannot be directly calculated with them. Nevertheless, the critical point linked to a second-order phase transition can be determined by either the heat capacity or the scalar. In addition, we calculate the critical exponents of the heat capacity and the scalar for the saturated small and large black holes near the critical point.

Healthcare reform: the role of coordinated critical care.

Science.gov (United States)

Cerra, F B

1993-03-01

To evaluate and editorialize the evolving role of the discipline of critical care as a healthcare delivery system in the process of healthcare reform. The sources included material from the Federal Office of Management and Budget, Health Care Financing Review, President Bush's Office, Association of American Medical Colleges, and publications of the Society of Critical Care Medicine. Data were selected that the author felt was relevant to the healthcare reform process and its implications for the discipline of critical care. The data were extracted by the author to illustrate the forces behind healthcare reform, the implications for the practice of critical care, and role of critical care as a coordinated (managed) care system in the process of healthcare reform. Healthcare reform has been initiated because of a number of considerations that arise in evaluating the current healthcare delivery system: access, financing, cost, dissatisfactions with the mechanisms of delivery, and political issues. The reform process will occur with or without the involvement of critical care practitioners. Reforms may greatly alter the delivery of critical care services, education, training, and research in critical care. Critical care has evolved into a healthcare delivery system that provides services to patients who need and request them and provides these services in a coordinated (managed) care model. Critical care practitioners must become involved in the healthcare reform process, and critical care services that are effective must be preserved, as must the education, training, and research programs. Critical care as a healthcare delivery system utilizing a coordinated (managed) care model has the potential to provide services to all patients who need them and to deliver them in a manner that is cost effective and recognized as providing added value.

Nutritional requirements of the critically ill patient.

Science.gov (United States)

Chan, Daniel L

2004-02-01

The presence or development of malnutrition during critical illness has been unequivocally associated with increased morbidity and mortality in people. Recognition that malnutrition may similarly affect veterinary patients emphasizes the need to properly address the nutritional requirements of hospitalized dogs and cats. Because of a lack in veterinary studies evaluating the nutritional requirements of critically ill small animals, current recommendations for nutritional support of veterinary patients are based largely on sound clinical judgment and the best information available, including data from experimental animal models and human studies. This, however, should not discourage the veterinary practitioner from implementing nutritional support in critically ill patients. Similar to many supportive measures of critically ill patients, nutritional interventions can have a significant impact on patient morbidity and may even improve survival. The first step of nutritional support is to identify patients most likely to benefit from nutritional intervention. Careful assessment of the patient and appraisal of its nutritional needs provide the basis for a nutritional plan, which includes choosing the optimal route of nutritional support, determining the number of calories to provide, and determining the composition of the diet. Ultimately, the success of the nutritional management of critically ill dogs and cats will depend on close monitoring and frequent reassessment.

Bubble dynamics in microchannels: inertial and capillary migration forces

Science.gov (United States)

Rivero-Rodriguez, Javier; Scheid, Benoit

2018-05-01

This work focuses on the dynamics of a train of unconfined bubbles flowing in microchan- nels. We investigate the transverse position of a train of bubbles, its velocity and the associated pressure drop when flowing in a microchannel depending on the internal forces due to viscosity, inertia and capillarity. Despite the small scales of the system, inertia, referred to as inertial migration force, play a crucial role in determining the transverse equilibrium position of the bubbles. Beside inertia and viscosity, other effects may also affect the transverse migration of bubbles such as the Marangoni surface stresses and the surface deformability. We look at the influence of surfactants in the limit of infinite Marangoni effect which yields rigid bubble interface. The resulting migration force may balance external body forces if present such as buoyancy, Dean or magnetic ones. This balance not only determines the transverse position of the bubbles but, consequently, the surrounding flow structure, which can be determinant for any mass/heat transfer process involved. Finally, we look at the influence of the bubble deformation on the equilibrium position and compare it to the inertial migration force at the centred position, explaining the stable or unstable character of this position accordingly. A systematic study of the influence of the parameters - such as the bubble size, uniform body force, Reynolds and capillary numbers - has been carried out using numerical simulations based on the Finite Element Method, solving the full steady Navier-Stokes equations and its asymptotic counterpart for the limits of small Reynolds and/or capillary numbers.

On the motion of non-spherical particles at high Reynolds number

DEFF Research Database (Denmark)

Mandø, Matthias; Rosendahl, Lasse

2010-01-01

This paper contains a critical review of available methodology for dealing with the motion of non-spherical particles at higher Reynolds numbers in the Eulerian- Lagrangian methodology for dispersed flow. First, an account of the various attempts to classify the various shapes and the efforts...... motion it is necessary to account for the non-coincidence between the center of pressure and center of gravity which is a direct consequence of the inertial pressure forces associated with particles at high Reynolds number flow. Extensions for non-spherical particles at higher Reynolds numbers are far...

Critical enrichment and critical density of infinite systems for nuclear criticality safety evaluation

International Nuclear Information System (INIS)

Naito, Yoshitaka; Koyama, Takashi; Komuro, Yuichi

1986-03-01

Critical enrichment and critical density of homogenous infinite systems, such as U-H 2 O, UO 2 -H 2 O, UO 2 F 2 aqueous solution, UO 2 (NO 3 ) 2 aqueous solution, Pu-H 2 O, PuO 2 -H 2 O, Pu(NO 3 ) 4 aqueous solution and PuO 2 ·UO 2 -H 2 O, were calculated with the criticality safety evaluation computer code system JACS for nuclear criticality safety evaluation on fuel facilities. The computed results were compared with the data described in European and American criticality handbooks and showed good agreement with each other. (author)

Renewing U.S. Mathematics; Critical Resource for the Future.

Science.gov (United States)

1986-04-30

formulated in 1922. It deals with the number of rational points on algebraic curves of genus 2 or higher. It concerns the number of points having...becomes increasingly mathematicized. For academic mathematicians and their institutions, funding in- equities across the sciences create real problems. At... equity among the fields it supports. This vulnerability concerns us over the long run. It should not be interpreted as a criticism of current events at

The meaning of social support for the critically ill patient.

Science.gov (United States)

Hupcey, J E

2001-08-01

Social support has been shown to be important for the critically ill patient. However, what constitutes adequate support for these patients has not been investigated. Thus, the purpose of this qualitative study was to investigate patients' perceptions of their need for and adequacy of the social support received while they were critically ill. Thirty adult patients who were critical during some point of their stay in the intensive care unit (ICU) stay were interviewed, once stable. Interviews were tape-recorded and began with an open-ended question regarding the ICU experience. This was followed by open-ended focused questions regarding social support, such as 'Who were your greatest sources of social support while you were critically ill?' 'What did they do that was supportive or unsupportive?' Data were analyzed according to Miles and Huberman (1994). The categories that emerged were need for social support based on patient perceptions (not number of visitors), quality of support (based on perceptions of positive and negative behaviors of supporters) and lack of support. This study found that quality of support was more important than the actual number of visitors. Patients with few visitors may have felt supported, while those with numerous visitors felt unsupported. Patients who felt unsupported also were more critical of the staff and the care they received. Nurses need to individually assess patients regarding their need for support, and assist family/friends to meet these needs.

Simulating an arbitrary number of flavors of dynamical overlap fermions

International Nuclear Information System (INIS)

DeGrand, T.; Schaefer, S.

2006-05-01

We present a set of related Hybrid Monte Carlo methods to simulate an arbitrary number of dynamical overlap fermions. Each fermion is represented by a chiral pseudo-fermion field. The new algorithm reduces critical slowing down in the chiral limit and for sectors of nontrivial topology. (Orig.)

Particle number fluctuations for the van der Waals equation of state

International Nuclear Information System (INIS)

Vovchenko, V; Anchishkin, D V; Gorenstein, M I

2015-01-01

The van der Waals (VDW) equation of state describes a thermal equilibrium in system of particles, where both repulsive and attractive interactions between them are included. This equation predicts the existence of the first order liquid–gas phase transition and the critical point. The standard form of the VDW equation is given by the pressure function in a canonical ensemble (CE) with a fixed number of particles. In this paper the VDW equation is derived within the grand canonical ensemble (GCE) formulation. We argue that this procedure can be useful for new physical applications, in particular, the fluctuations of the number of particles, which are absent in the CE, can be studied in the GCE. For the VDW equation of state in the GCE the particle number fluctuations are calculated for the whole phase diagram, both outside and inside the liquid–gas mixed phase region. It is shown that the scaled variance of these fluctuations remains finite within the mixed phase and goes to infinity at the critical point. The GCE formulation of the VDW equation of state can also be an important step for its application in the statistical description of hadronic systems, where numbers of different particle species are usually not conserved. (paper)

Critical Points of Contact

DEFF Research Database (Denmark)

Jensen, Ole B.; Wind, Simon; Lanng, Ditte Bendix

2012-01-01

In this brief article, we shall illustrate the application of the analytical and interventionist concept of ‘Critical Points of Contact’ (CPC) through a number of urban design studios. The notion of CPC has been developed over a span of the last three to four years and is reported in more detail...... elsewhere (Jensen & Morelli 2011). In this article, we will only discuss the conceptual and theoretical framing superficially, since our real interest is to show and discuss the concept's application value to spatial design in a number of urban design studios. The 'data' or the projects presented are seven...... in urban design at Aalborg University, where urban design consists of both an analytical and an interventionist field of operation. Furthermore, the content of the CPC concept links to research in mobilities, the network city, and urban design. These are among the core pillars of both the masters programme...

Linear-stability theory of thermocapillary convection in a model of float-zone crystal growth

Science.gov (United States)

Neitzel, G. P.; Chang, K.-T.; Jankowski, D. F.; Mittelmann, H. D.

1992-01-01

Linear-stability theory has been applied to a basic state of thermocapillary convection in a model half-zone to determine values of the Marangoni number above which instability is guaranteed. The basic state must be determined numerically since the half-zone is of finite, O(1) aspect ratio with two-dimensional flow and temperature fields. This, in turn, means that the governing equations for disturbance quantities will remain partial differential equations. The disturbance equations are treated by a staggered-grid discretization scheme. Results are presented for a variety of parameters of interest in the problem, including both terrestrial and microgravity cases.

Triage and medical management of criticality accident victims

International Nuclear Information System (INIS)

Lebaron-Jacobs, L.; Flury-Herard, A.; Cavadore, D.

2002-01-01

The criticality accident is the result of an uncontrolled chain fission reaction initiated when the quantities of nuclear materials (uranium or plutonium)present accidentally exceed a given limit called the c ritical mass . As soon as the critical state is exceeded, the chain reaction increases exponentially. The result is a fast increase in the number of fission events which occur within the fissile medium. This phenomenon results in a release of energy mainly in the form of heat, accompanied by the intense emission of neutron and gamma radiation and the release of fission gases (Barby, 1983)

Reduced Cortisol Metabolism during Critical Illness

Science.gov (United States)

Boonen, Eva; Vervenne, Hilke; Meersseman, Philippe; Andrew, Ruth; Mortier, Leen; Declercq, Peter E.; Vanwijngaerden, Yoo-Mee; Spriet, Isabel; Wouters, Pieter J.; Perre, Sarah Vander; Langouche, Lies; Vanhorebeek, Ilse; Walker, Brian R.; Van den Berghe, Greet

2015-01-01

BACKGROUND Critical illness is often accompanied by hypercortisolemia, which has been attributed to stress-induced activation of the hypothalamic–pituitary–adrenal axis. However, low corticotropin levels have also been reported in critically ill patients, which may be due to reduced cortisol metabolism. METHODS In a total of 158 patients in the intensive care unit and 64 matched controls, we tested five aspects of cortisol metabolism: daily levels of corticotropin and cortisol; plasma cortisol clearance, metabolism, and production during infusion of deuterium-labeled steroid hormones as tracers; plasma clearance of 100 mg of hydrocortisone; levels of urinary cortisol metabolites; and levels of messenger RNA and protein in liver and adipose tissue, to assess major cortisol-metabolizing enzymes. RESULTS Total and free circulating cortisol levels were consistently higher in the patients than in controls, whereas corticotropin levels were lower (PCortisol production was 83% higher in the patients (P=0.02). There was a reduction of more than 50% in cortisol clearance during tracer infusion and after the administration of 100 mg of hydrocortisone in the patients (P≤0.03 for both comparisons). All these factors accounted for an increase by a factor of 3.5 in plasma cortisol levels in the patients, as compared with controls (Pcortisol clearance also correlated with a lower cortisol response to corticotropin stimulation. Reduced cortisol metabolism was associated with reduced inactivation of cortisol in the liver and kidney, as suggested by urinary steroid ratios, tracer kinetics, and assessment of liver-biopsy samples (P≤0.004 for all comparisons). CONCLUSIONS During critical illness, reduced cortisol breakdown, related to suppressed expression and activity of cortisol-metabolizing enzymes, contributed to hypercortisolemia and hence corticotropin suppression. The diagnostic and therapeutic implications for critically ill patients are unknown. (Funded by the Belgian

Critical sustainability parameters in defluoridation of drinking water

DEFF Research Database (Denmark)

Bregnhøj, Henrik

to be critical since fluorosis is not always considered as the main problem of concern and improvements are not always visible for a number of years. Appropiate and cheap technique is always a must in poor villages. Finally the organisation of supporting functions that may include quality control, technical...

New developments enhancing MCNP for criticality safety

International Nuclear Information System (INIS)

Hendricks, J.S.; McKinney, G.W.; Forster, R.A.

1993-01-01

Since the early 80's MCNP has had three estimates of k eff : collision, absorption, and track length. MCNP has also had collision and absorption estimators of removal lifetime. These are calculated for every cycle and are averaged over the cycles as simple averages and covariance weighted averages. Correlation coefficients between estimators are also calculated. These criticality estimators are all in addition to the extensive summary information and tally edits used in shielding and other problems. A number of significant new developments have been made to enhance the MCNP Monte Carlo radiation transport code for criticality safety applications. These are available in the newly released MCNP4A version of the code

Exploring the Relationship between Burnout and Critical Thinking Skills among Iranian University Professors Teaching TEFL

Directory of Open Access Journals (Sweden)

Hossein Khodabakhshzadeh

2017-10-01

Full Text Available The profession as a teacher involves experiencing a number of challenges which naturally lead to emotional tiredness and lack of reward, technically known as burnout (Colomeischi, 2015. The goal of the present study was to investigate the relationship between burnout and critical thinking ability. To this end, a sample of 40 professors of Teaching English as a Foreign Language (TEFL filed at a number of universities in Iran was chosen. Maslach Burnout Inventory (MBI was employed to assess the participants' burnout level, which is specifically evaluated by measuring three subscales of emotional exhaustion, depersonalization, and personal achievement. In addition, the measures of the participants' critical thinking skills were obtained via Watson-Glaser Critical Thinking Appraisal (WGCTA. The Pearson correlation coefficient analysis indicated that emotional exhaustion and depersonalization strongly and negatively correlated with critical thinking ability. However, a strong and positive relationship was found between personal achievement and critical thinking skills.

Nostalgia Videogames as Playable Game Criticism

Directory of Open Access Journals (Sweden)

Robin J.S. Sloan

2016-11-01

Full Text Available The aim of this paper is to consider the emergence of nostalgia videogames in the context of playable game criticism. Mirroring the development of the nostalgia film in cinema, an increasing number of developers are creating videogames that are evocative of past gaming forms, designs, and styles. The primary focus of this paper is to explore the extent to which these nostalgia videogames could be considered games-on-games: games that offer a critical view on game design and development, framed by the nostalgia and cultural memory of both gamers and game developers. Theories of pastiche and parody as applied to literature, film, and art are used to form a basis for the examination of recent nostalgia videogames, all of which demonstrate a degree of reflection on the videogame medium.

Selenium supplementation for critically ill adults

DEFF Research Database (Denmark)

Allingstrup, Mikkel; Afshari, Arash

2015-01-01

BACKGROUND: Selenium is a trace mineral essential to health and has an important role in immunity, defence against tissue damage and thyroid function. Improving selenium status could help protect against overwhelming tissue damage and infection in critically ill adults. This Cochrane review...... was originally published in 2004 updated in 2007 and again 2015. OBJECTIVES: The primary objective was to examine the effect of nutrition supplemented with selenium or ebselen on mortality in critically ill patients.The secondary objective was to examine the relationship between selenium or ebselen...... supplementation and number of infections, duration of mechanical ventilation, length of intensive care unit stay and length of hospital stay. SEARCH METHODS: In this update, we searched the current issue of the Cochrane Central Register of Controlled Trials, the Cochrane Library (2014, Issue 5); MEDLINE (Ovid SP...

Critical Media Literacy in Action: Uniting Theory, Practice and Politics in Media Education

Science.gov (United States)

Thevenin, Benjamin Joseph

2012-01-01

As media literacy is a growing field, there exist a number of distinct approaches to media education with varied political significance. Approaches such as protectionism, media arts education, and critical media literacy draw upon diverse theoretical traditions. Often overlooked in these traditions is the Critical Theory of the Frankfurt School.…

Thinking Critically about Critical Thinking: Integrating Online Tools to Promote Critical Thinking

OpenAIRE

B. Jean Mandernach, PhD

2006-01-01

The value and importance of critical thinking is clearly established; the challenge for instructors lies in successfully promoting students’ critical thinking skills within the confines of a traditional classroom experience. Since instructors are faced with limited student contact time to meet their instructional objectives and facilitate learning, they are often forced to make instructional decisions between content coverage, depth of understanding, and critical analysis of course material. ...

CRITICALITY SAFETY LIMIT EVALUATION PROGRAM (CSLEP's) AND QUICK SCREENS: ANSWERS TO EXPEDITED PROCESSING LEGACY CRITICALITY SAFETY LIMITS AND EVALUATIONS

International Nuclear Information System (INIS)

TOFFER, H.

2006-01-01

Since the end of the cold war, the need for operating weapons production facilities has faded. Criticality Safety Limits and controls supporting production modes in these facilities became outdated and furthermore lacked the procedure based rigor dictated by present day requirements. In the past, in many instances, the formalism of present day criticality safety evaluations was not applied. Some of the safety evaluations amounted to a paragraph in a notebook with no safety basis and questionable arguments with respect to double contingency criteria. When material stabilization, clean out, and deactivation activities commenced, large numbers of these older criticality safety evaluations were uncovered with limits and controls backed up by tenuous arguments. A dilemma developed: on the one hand, cleanup activities were placed on very aggressive schedules; on the other hand, a highly structured approach to limits development was required and applied to the cleanup operations. Some creative approaches were needed to cope with the limits development process

Critical Cases Faced by Mental Health Nurses and Assistant Nurses in Psychiatric Hospitals in Greece

Directory of Open Access Journals (Sweden)

Evmorfia Koukia

2013-01-01

Full Text Available Background: Psychiatric Nurses and nurses’ assistants working in an inpatient unit experience a significant number of critical cases. A small number of studies have explored which patients’ problems nurses perceive as ‘critical case or incident’ and particularly which interventions they choose. Aim: The aim of the research was 1. To identify the clinical problems that mental health nurses and assistant nurses characterize as critical 2. To report the main nursing interventions 3. To investigate the main person involved in the critical incident. Material-Method: Critical incident technique was used as a method of data collection. Content analysis was carried out in order nurses’ information to be categorized into subcategories. The sample consisted of 35 mental health nurses and nurses’ assistants who work in psychiatric acute inpatient wards.Results: Nurses identified ten types of critical incidents. They noted violence (verbal, physical by patients and psychotic symptoms to be the most critical situations. Nurses were the main person involved in these incidents. The study also described eight nursing interventions used by nurses when faced with critical events. Conclusions: The findings indicated that mental health nurses and assistant nurses working in acute inpatient wards are called to confront a variety of critical incidents in their every day practice. Further research is necessary to identify in-depth nursing interventions and decision-making used in these situations.

Drivers and Constraints of Critical Materials Recycling: The Case of Indium

Directory of Open Access Journals (Sweden)

Jenni Ylä-Mella

2016-11-01

Full Text Available Raw material criticality studies are receiving increasing attention because an increasing number of elements of great economic importance, performing essential functions face high supply risks. Scarcity of key materials is a potential barrier to large-scale deployment of sustainable energy and clean-tech technologies as resorting to several critical materials. As physical scarcity and geopolitical issues may present a barrier to the supply of critical metals, recycling is regarded as a possible solution to substitute primary resources for securing the long-term supply of critical metals. In this paper, the main drivers and constraints for critical materials recycling are analyzed from literature, considering indium as a case study of critical materials. This literature review shows that waste electrical and electronic equipment (WEEE could be a future source of critical metals; however, the reduction of dissipation of critical materials should have much higher priority. It is put forward that more attention should be paid to sustainable management of critical materials, especially improved practices at the waste management stage. This calls for not only more efficient WEEE recycling technologies, but also revising priorities in recycling strategies.

Universal conductance and conductivity at critical points in integer quantum Hall systems.

Science.gov (United States)

Schweitzer, L; Markos, P

2005-12-16

The sample averaged longitudinal two-terminal conductance and the respective Kubo conductivity are calculated at quantum critical points in the integer quantum Hall regime. In the limit of large system size, both transport quantities are found to be the same within numerical uncertainty in the lowest Landau band, and , respectively. In the second-lowest Landau band, a critical conductance is obtained which indeed supports the notion of universality. However, these numbers are significantly at variance with the hitherto commonly believed value . We argue that this difference is due to the multifractal structure of critical wave functions, a property that should generically show up in the conductance at quantum critical points.

NUCDAS: a database of nuclear criticality data around the world

International Nuclear Information System (INIS)

Komuro, Yuichi; Sakai, Tomohiro

1999-01-01

The NUCDAS database, which contains great numbers of nuclear criticality data and subcritical limit data described in criticality safety handbooks of Japan and foreign countries, has been developed at JAERI. The database was designed to perform quick search on criticality data and subcritical limits and to draw their curves for comparison. So, criticality data among handbooks can be shown on the screen and/or printed on the paper. The database runs on the Apple Macintosh computer and written in 4th Dimension, a relational database software for the Macintosh. This tool provides powerful search and sort capabilities. An appropriate graphic software (e.g. KaleidaGraph) is used to draw a graph of selected criticality data. NUCDAS will be demonstrated in the poster presentation. NUCEF'98 participants who are interested in NUCDAS will be able to operate Macintosh with the database and will be encouraged to give us some comments on it for modifications. Though all messages on the screen are written in Japanese, don't worry. (author)

Stability in shifting sands: contemporary leadership roles in critical care.

Science.gov (United States)

Endacott, R; Boulanger, C; Chamberlain, W; Hendry, J; Ryan, H; Chaboyer, W

2008-10-01

Contemporary nursing leadership roles in critical care are a reflection of the changing environment in which critical care is provided. In the UK, critical care nursing faces challenges in the form of: reduced number and seniority of medical staff cover for acute wards; mandated responsibility for management of patients outside of critical care units, without corresponding responsibility for managing staff; increased public and political awareness of deficits in critical care; increased use of Assistant Practitioners; and emphasis on longer-term outcomes from intensive care. New leadership roles have met these challenges head on with two main foci: patient management across the acute/critical care interface and hospital wide policies and practice. The leadership roles examined in this paper highlight three underpinning goals: improved quality and safety of patient care; improved communication between professionals; and empowerment of junior nurses and doctors. There has been considerable investment in strategic leadership roles for critical care nursing; evidence is developing of the return on this investment for patient and service outcomes. Consideration must now be given to the preparation, mentorship and development of leadership roles for the next generation of nurse leaders.

Why I Believe People Need Painting By Numbers

Directory of Open Access Journals (Sweden)

Jason Makansi

2018-01-01

Full Text Available Jason Makansi. Painting By Numbers: How to Sharpen Your BS Detector and Smoke Out the Experts (Tucson AZ: Layla Dog Press, 2016. 196 pp. ISBN 978-0998425900. This piece briefly introduces my Painting By Numbers, which aims to take the core messages of the QL/QR community from academic and professional circles to the rest of the citizenry. I describe the book in the context of the critical need for the most basic numeracy tools to help consumers of news, information, and analysis�delivered through traditional and contemporary social media outlets�determine where a reported numerical result lies on the scale from utter nonsense to a widely established and accepted �fact.�

A leadership programme for critical care.

Science.gov (United States)

Crofts, Linda

2006-08-01

This paper describes the genesis, design and implementation of a leadership programme for critical care. This was an initiative funded by the National Health Service (NHS) Nursing Leadership Project and had at the core of its design flexibility to meet the needs of the individual hospitals, which took part in it. Participation was from the multi-disciplinary critical care team. Six NHS hospitals took part in the programme which was of 20 days duration and took place on hospital sites. The programme used the leadership model of as its template and had a number of distinct components; a baseline assessment, personal development, principles of leadership and critical case reviews. The programme was underpinned by three themes; working effectively in multi-professional teams to provide patient focussed care, managing change through effective leadership and developing the virtual critical care service. Each group set objectives pertinent to their own organisation's needs. The programme was evaluated by a self-reporting questionnaire; group feedback and feedback from stakeholders. Programme evaluation was positive from all the hospitals but it was clear that the impact of the programme varied considerably between the groups who took part. It was noted that there was some correlation between the success of the programme and organisational 'buy in' as well as the organisational culture within which the participants operated. A key feature of the programme success was the critical case reviews, which were considered to be a powerful learning tool and medium for group learning and change management.

Critical thinking: Not all that critical

Directory of Open Access Journals (Sweden)

Bruce Dietrick Price

2016-09-01

Full Text Available Critical Thinking basically says to be suspicious of everything, except the fad known as Critical Thinking. It is perhaps best understood as a new and watered-down version of an earlier fad called Deconstruction. That was just a fancy word for debunking. After you strip away all the high-minded rhetoric, Critical Thinking is typically used to tell students that they should not trust conventional wisdom, tradition, religion, parents, and all that irrelevant, old-fashioned stuff. Critical Thinking, somewhat surprisingly, also turns out to be highly contemptuous of facts and knowledge. The formulation in public schools goes like this: children must learn how to think, not what to think. WHAT is, of course, all the academic content and scholarly knowledge that schools used to teach.

Crossover phenomena in the critical range near magnetic ordering transition

Science.gov (United States)

Köbler, U.

2018-05-01

Among the most important issues of Renormalization Group (RG) theory are crossover events and relevant (or non-relevant) interactions. These terms are unknown to atomistic theories but they will be decisive for future field theories of magnetism. In this experimental study the importance of these terms for the critical dynamics above and below magnetic ordering transition is demonstrated on account of new analyses of published data. When crossover events are overlooked and critical data are fitted by a single power function of temperature over a temperature range including a crossover event, imprecise critical exponents result. The rather unsystematic and floating critical exponents reported in literature seem largely to be due to this problem. It is shown that for appropriate data analyses critical exponents are obtained that are to a good approximation rational numbers. In fact, rational critical exponents can be expected when spin dynamics is controlled by the bosons of the continuous magnetic medium (Goldstone bosons). The bosons are essentially magnetic dipole radiation generated by the precessing spins. As a result of the here performed data analyses, critical exponents for the magnetic order parameter of β = 1/2, 1/3, 1/4 and 1/6 are obtained. For the critical paramagnetic susceptibility the exponents are γ = 1 and γ = 4/3.

Implementation of critical success factors in construction research ...

African Journals Online (AJOL)

Construction research and development (R&D) process has a number of issues that affect its success. These issues imply that Critical Success Factors (CSFs) of construction R&D process are not properly addressed. Not knowing CSFs could lead to not implementing them and not paying proper attention for them. The study ...

Statistics of an ideal homogeneous Bose gas with a fixed number of particles

International Nuclear Information System (INIS)

Alekseev, Vladimir A

2001-01-01

The distribution function w 0 (n 0 ) of the number n 0 of particles is found for the condensate of an ideal gas of free bosons with a fixed total number N of particles. It is shown that above the critical temperature (T > T c ) this function has the usual form w 0 (n 0 ) = (1 - e μ )e μn 0 , where μ is the chemical potential in temperature units. In a narrow vicinity of the critical temperature |T/T c - 1| ≤ N -1/3 , this distribution changes and at T c acquires the form of a resonance. The width of the resonance depends on the shape of the volume occupied by the gas and it has exponential (but not the Gaussian) wings. As the temperature is lowered, the resonance maximum shifts to larger values of n 0 and its width tends to zero, which corresponds to the suppression of fluctuations. For N → ∞, this change occurs abruptly. The distribution function of the number of particles in excited states for the systems with a fixed and a variable number of particles (when only a mean number of particles is fixed) prove to be identical and have the usual form. (physical basis of quantum electronics)

Critical points for finite Fibonacci chains of point delta-interactions and orthogonal polynomials

International Nuclear Information System (INIS)

De Prunele, E

2011-01-01

For a one-dimensional Schroedinger operator with a finite number n of point delta-interactions with a common intensity, the parameters are the intensity, the n - 1 intercenter distances and the mass. Critical points are points in the parameters space of the Hamiltonian where one bound state appears or disappears. The study of critical points for Hamiltonians with point delta-interactions arranged along a Fibonacci chain is shown to be closely related to the study of the so-called Fibonacci operator, a discrete one-dimensional Schroedinger-type operator, which occurs in the context of tight binding Hamiltonians. These critical points are the zeros of orthogonal polynomials previously studied in the context of special diatomic linear chains with elastic nearest-neighbor interaction. Properties of the zeros (location, asymptotic behavior, gaps, ...) are investigated. The perturbation series from the solvable periodic case is determined. The measure which yields orthogonality is investigated numerically from the zeros. It is shown that the transmission coefficient at zero energy can be expressed in terms of the orthogonal polynomials and their associated polynomials. In particular, it is shown that when the number of point delta-interactions is equal to a Fibonacci number minus 1, i.e. when the intervals between point delta-interactions form a palindrome, all the Fibonacci chains at critical points are completely transparent at zero energy. (paper)

Baryon number fluctuations and the phase structure in the PNJL model

Energy Technology Data Exchange (ETDEWEB)

Shao, Guo-yun; Tang, Zhan-duo; Gao, Xue-yan; He, Wei-bo [Xi' an Jiaotong University, School of Science, Xi' an, Shaanxi (China)

2018-02-15

We investigate the kurtosis and skewness of net-baryon number fluctuations in the Polyakov loop extended Nambu-Jona-Lasinio (PNJL) model, and discuss the relations between fluctuation distributions and the phase structure of quark-gluon matter. The calculation shows that the traces of chiral and deconfinement transitions can be effectively reflected by the kurtosis and skewness of net-baryon number fluctuations not only in the critical region but also in the crossover region. The contour plot of baryon number kurtosis derived in the PNJL model can qualitatively explain the behavior of net-proton number kurtosis in the STAR beam energy scan experiments. Moreover, the three-dimensional presentations of the kurtosis and skewness in this study are helpful to understand the relations between baryon number fluctuations and QCD phase structure. (orig.)

CFD simulation of estimating critical shear stress for cleaning flat ...

Indian Academy of Sciences (India)

Sumit Kawale

2017-11-22

Nov 22, 2017 ... Jet impingement; wall shear stress; cleaning of flat plate; turbulence model; critical shear stress; ... On comparing the theoretical predictions with wall shear ... distance and Reynolds number on peak value of local shear stress ...

Critical thinking dispositions and learning styles of baccalaureate nursing students from China.

Science.gov (United States)

Zhang, Huan; Lambert, Vickie

2008-09-01

Although considerable information exists regarding the learning styles and critical thinking dispositions of nursing students from Western countries, limited comparable information exists within China. The purposes of this study were to assess the learning styles and critical thinking dispositions of Chinese baccalaureate nursing students and to identify the relationships among the learning styles, critical thinking dispositions, and demographics. The sample consisted of 100 Chinese baccalaureate nursing students enrolled at two universities. The data were obtained through a Demographic Data Questionnaire, the California Critical Thinking Disposition Inventory, and the Index of Learning Styles. The primary learning style dimensions were found to be reflective, sensing, visual, and global, while the critically thinking abilities was found to be weak. A number of positive and negative correlations were found among the demographics, learning styles, and critical thinking dispositions. These findings suggest further examination on how to increase nursing students' critical thinking skills based upon their preferred learning styles.

Modelling of hydrothermal instabilities in a capillary bridge

Science.gov (United States)

Pillai, Dipin; Wray, Alex; Narayanan, Ranga

2017-11-01

We examine the behaviour of a capillary bridge/boat suspended between two heated plates. Such systems are common in many physical situations such as crystal growth processes. However, as shown experimentally by Messmer et al., the system exhibits a complex array of behaviours driven by a Marangoni instability. While qualitative arguments have been advanced for these behaviours in the past, we develop a complete low-order model to elucidate the mechanisms at work. The model takes into account viscosity, surface tension, Marangoni stress and inertia as well as a full convection-diffusion equation for the thermal effects. Detailed comparisons of flow fields and thermal distributions are made with experiments. NASA NNX17AL27G and NSF 0968313.

Scaled parametric equation of state for steam in the critical region

International Nuclear Information System (INIS)

Murphy, T.A.; Sengers, J.V.

1975-01-01

The anomalous thermodynamic behavior of fluids near the critical point can be described in terms of scaling laws. In recent years a parametric equation of state, the so-called Linear Model, has been proposed that satisfies the scaling laws and contains only a small number of adjustable parameters. It is shown that the Linear Model yields a satisfactory representation of the experimental P-V-T data for steam in the critical region. (29 references)

Critical parameters of Quark-Hadron phase transition with interacting and massive quarks

International Nuclear Information System (INIS)

Singh, C.P.; Patra, B.K.

1994-06-01

Current techniques to simulate the dynamical behaviour of Quark-Gluon Plasma (QGP) reveal that the order of the phase transition as well as the values of the critical parameters depend on the number of quark flavours as well as on the quark-masses included in the simulation. We attempt to show here the effects of the number of quark flavours and quark-masses on critical parameters by using the perturbative, finite temperature field theory to g 3 s order in the strong coupling g s . We treat the hadrons as particles with finite size and its implications on the equation of state for hadron gas are studied. We find that the critical temperature T c is lowered by 9 MeV as we move from two to three quark flavours. The nature of the phase transition always remains as first order. However, the inclusion of quark-masses in our calculation does not affect the result much. (author). 14 refs, 3 figs

Exponential and Critical Experiments Vol. II. Proceedings of the Symposium on Exponential and Critical Experiments

International Nuclear Information System (INIS)

1964-01-01

In September 1963 the International Atomic Energy Agency organized the Symposium on Exponential and Critical Experiments in Amsterdam, Netherlands, at the invitation of the Government of the Netherlands. The Symposium enabled scientists from Member States to discuss the results of such experiments which provide the physics data necessary for the design of power reactors. Great advances made in recent years in this field have provided scientists with highly sophisticated and reliable experimental and theoretical methods. This trend is reflected in the presentation, at the Symposium, of many new experimental techniques resulting in more detailed and accurate information and a reduction of costs. Both the number of experimental parameters and their range of variation have been extended, and a closer degree of simulation of the actual power reactor has been achieved, for example, by means of high temperature critical assemblies. Basic types of lattices have continued to be the objective of many investigations, and extensive theoretical analyses have been carried out to provide a more thorough understanding of the neutron physics involved. Twenty nine countries and 3 international organizations were represented by 198 participants. Seventy one papers were presented. These numbers alone show the wide interest which the topic commands in the field of reactor design. We hope that this publication, which includes the papers presented at the Symposium and a record of the discussions, will prove useful as a work of reference to scientists working in this field

Criticality Model

International Nuclear Information System (INIS)

Alsaed, A.

2004-01-01

The ''Disposal Criticality Analysis Methodology Topical Report'' (YMP 2003) presents the methodology for evaluating potential criticality situations in the monitored geologic repository. As stated in the referenced Topical Report, the detailed methodology for performing the disposal criticality analyses will be documented in model reports. Many of the models developed in support of the Topical Report differ from the definition of models as given in the Office of Civilian Radioactive Waste Management procedure AP-SIII.10Q, ''Models'', in that they are procedural, rather than mathematical. These model reports document the detailed methodology necessary to implement the approach presented in the Disposal Criticality Analysis Methodology Topical Report and provide calculations utilizing the methodology. Thus, the governing procedure for this type of report is AP-3.12Q, ''Design Calculations and Analyses''. The ''Criticality Model'' is of this latter type, providing a process evaluating the criticality potential of in-package and external configurations. The purpose of this analysis is to layout the process for calculating the criticality potential for various in-package and external configurations and to calculate lower-bound tolerance limit (LBTL) values and determine range of applicability (ROA) parameters. The LBTL calculations and the ROA determinations are performed using selected benchmark experiments that are applicable to various waste forms and various in-package and external configurations. The waste forms considered in this calculation are pressurized water reactor (PWR), boiling water reactor (BWR), Fast Flux Test Facility (FFTF), Training Research Isotope General Atomic (TRIGA), Enrico Fermi, Shippingport pressurized water reactor, Shippingport light water breeder reactor (LWBR), N-Reactor, Melt and Dilute, and Fort Saint Vrain Reactor spent nuclear fuel (SNF). The scope of this analysis is to document the criticality computational method. The criticality

Deconfined Quantum Critical Points: Symmetries and Dualities

Directory of Open Access Journals (Sweden)

Chong Wang

2017-09-01

Full Text Available The deconfined quantum critical point (QCP, separating the Néel and valence bond solid phases in a 2D antiferromagnet, was proposed as an example of (2+1D criticality fundamentally different from standard Landau-Ginzburg-Wilson-Fisher criticality. In this work, we present multiple equivalent descriptions of deconfined QCPs, and use these to address the possibility of enlarged emergent symmetries in the low-energy limit. The easy-plane deconfined QCP, besides its previously discussed self-duality, is dual to N_{f}=2 fermionic quantum electrodynamics, which has its own self-duality and hence may have an O(4×Z_{2}^{T} symmetry. We propose several dualities for the deconfined QCP with SU(2 spin symmetry which together make natural the emergence of a previously suggested SO(5 symmetry rotating the Néel and valence bond solid orders. These emergent symmetries are implemented anomalously. The associated infrared theories can also be viewed as surface descriptions of (3+1D topological paramagnets, giving further insight into the dualities. We describe a number of numerical tests of these dualities. We also discuss the possibility of “pseudocritical” behavior for deconfined critical points, and the meaning of the dualities and emergent symmetries in such a scenario.

Fluid Flow and Mixing Induced by AC Continuous Electrowetting of Liquid Metal Droplet

Directory of Open Access Journals (Sweden)

Qingming Hu

2017-04-01

Full Text Available In this work, we proposed a novel design of a microfluidic mixer utilizing the amplified Marangoni chaotic advection induced by alternating current (AC continuous electrowetting of a metal droplet situated in electrolyte solution, due to the linear and quadratic voltage-dependence of flow velocity at small or large voltages, respectively. Unlike previous researchers exploiting the unidirectional surface stress with direct current (DC bias at droplet/medium interface for pumping of electrolytes where the resulting flow rate is linearly proportional to the field intensity, dominance of another kind of dipolar flow pattern caused by local Marangoni stress at the drop surface in a sufficiently intense AC electric field is demonstrated by both theoretical analysis and experimental observation, which exhibits a quadratic growth trend as a function of the applied voltage. The dipolar shear stress merely appears at larger voltages and greatly enhances the mixing performance by inducing chaotic advection between the neighboring laminar flow. The mixer design developed herein, on the basis of amplified Marangoni chaotic advection around a liquid metal droplet at larger AC voltages, has great potential for chemical reaction and microelectromechanical systems (MEMS actuator applications because of generating high-throughput and excellent mixing performance at the same time.

Journalists' Occupational Stress: A Comparative Study between Reporting Critical Events and Domestic News.

Science.gov (United States)

Monteiro, Susana; Marques-Pinto, Alexandra

2017-07-27

Nowadays, journalism is considered a stressful occupation, not only due to the stress perceived in journalists' daily work but also due to the critical, potentially traumatic events they report. However, research on journalists' occupational stress in both these professional settings is still scarce. This study aims to characterize and compare occupational stress variables perceived by journalists in their daily work and in critical scenarios. Taking the Holistic Model of Occupational Stress by Nelson and Simmons (2003) as a framework, 25 Portuguese journalists, all with experience in reporting critical events, were interviewed on their perceptions of some core variables of the model: occupational stressors, distress and eustress emotional reactions, and the consequences of these experiences on their well-being. Differences among these core variables, according to the number of deployments to a critical event, were statistically analysed in order to ascertain whether repeated exposure to trauma influenced journalists' occupational stress perceptions. The data content analysis showed that occupational stressors and emotional reactions differed across settings, while the consequences associated with journalists' experiences were perceived as being mainly negative in both occupational contexts. Significant differences were identified in some of these variables according to the number of deployments to a critical event (p studies.

The chromatic number of a graph of girth 5 on a fixed surface

DEFF Research Database (Denmark)

Thomassen, Carsten

2003-01-01

We prove a color extension result implying that, for every fixed surface S, there are only finitely many 4-color-critical graphs of girth 5 on S. The result is best possible in the sense that there are infinitely many 4-color-critical graphs of girth 4 on S, except when S is the sphere, As a cons......, As a consequence, the chromatic number of graphs of girth 5 on S can be found in polynomial time....

Approximate number word knowledge before the cardinal principle.

Science.gov (United States)

Gunderson, Elizabeth A; Spaepen, Elizabet; Levine, Susan C

2015-02-01

Approximate number word knowledge-understanding the relation between the count words and the approximate magnitudes of sets-is a critical piece of knowledge that predicts later math achievement. However, researchers disagree about when children first show evidence of approximate number word knowledge-before, or only after, they have learned the cardinal principle. In two studies, children who had not yet learned the cardinal principle (subset-knowers) produced sets in response to number words (verbal comprehension task) and produced number words in response to set sizes (verbal production task). As evidence of approximate number word knowledge, we examined whether children's numerical responses increased with increasing numerosity of the stimulus. In Study 1, subset-knowers (ages 3.0-4.2 years) showed approximate number word knowledge above their knower-level on both tasks, but this effect did not extend to numbers above 4. In Study 2, we collected data from a broader age range of subset-knowers (ages 3.1-5.6 years). In this sample, children showed approximate number word knowledge on the verbal production task even when only examining set sizes above 4. Across studies, children's age predicted approximate number word knowledge (above 4) on the verbal production task when controlling for their knower-level, study (1 or 2), and parents' education, none of which predicted approximation ability. Thus, children can develop approximate knowledge of number words up to 10 before learning the cardinal principle. Furthermore, approximate number word knowledge increases with age and might not be closely related to the development of exact number word knowledge. Copyright © 2014 Elsevier Inc. All rights reserved.

Alternate measurements of benefit to criticality issues at Hanford

Energy Technology Data Exchange (ETDEWEB)

Toffer, H.; Cabrilla, D.E.

1997-06-01

Measurements in a critical mass facility, such as the Los Alamos Critical Experiments Facility, could be performed on simulated nuclear waste materials that would provide important critical mass information and concurrently provide a calibration of alternate measurement techniques. In addition to criticality information, the measurements could also provide a better assessment of diluent material/neutron interaction cross sections. An Hanford, large quantities of fissionable materials are dispersed in tanks, fuel storage pools, and in solid waste. Although the fissionable materials are well diluted by a variety of neutron-moderating and -absorbing substances, it is difficult to assess the margin of subcriticality. A number of measurement approaches are proposed that will either help determine fissionable material concentrations, distributions, or provide a direct measure of subcriticality. The methods under consideration involve passive neutron counting, active neutron measurements, pulse neutron applications, neutron noise analyses, and cover gas evaluations. Active neutron measurements can also provide insight into the determination of neutron absorber concentrations. Efforts are underway to test some of the methods in actual waste tank environments and geometries. It is important that these methods be tested and calibrated in a critical mass facility.

Alternate measurements of benefit to criticality issues at Hanford

International Nuclear Information System (INIS)

Toffer, H.; Cabrilla, D.E.

1997-01-01

Measurements in a critical mass facility, such as the Los Alamos Critical Experiments Facility, could be performed on simulated nuclear waste materials that would provide important critical mass information and concurrently provide a calibration of alternate measurement techniques. In addition to criticality information, the measurements could also provide a better assessment of diluent material/neutron interaction cross sections. An Hanford, large quantities of fissionable materials are dispersed in tanks, fuel storage pools, and in solid waste. Although the fissionable materials are well diluted by a variety of neutron-moderating and -absorbing substances, it is difficult to assess the margin of subcriticality. A number of measurement approaches are proposed that will either help determine fissionable material concentrations, distributions, or provide a direct measure of subcriticality. The methods under consideration involve passive neutron counting, active neutron measurements, pulse neutron applications, neutron noise analyses, and cover gas evaluations. Active neutron measurements can also provide insight into the determination of neutron absorber concentrations. Efforts are underway to test some of the methods in actual waste tank environments and geometries. It is important that these methods be tested and calibrated in a critical mass facility

Engineering Sustainable Solutions Program: Critical Literacies for Engineers Portfolio

Science.gov (United States)

Paten, Cheryl J. K.; Palousis, Nicholas; Hargroves, Karlson; Smith, Michael

2005-01-01

Purpose: While a number of universities in Australia have embraced concepts such as project/problem-based learning and design of innovative learning environments for engineering education, there has been a lack of national guidance on including sustainability as a "critical literacy" into all engineering streams. This paper was presented…

Risk and Interdependencies in Critical Infrastructures A Guideline for Analysis

CERN Document Server

Utne, Ingrid; Vatn, Jørn

2012-01-01

Today’s society is completely dependent on critical networks such as  water supply, sewage, electricity, ICT and transportation. Risk and vulnerability analyses are needed to grasp the impact of threats and hazards. However, these become quite complex as there are strong interdependencies both within and between infrastructure systems. Risk and Interdependencies in Critical Infrastructures: A  guideline for analysis provides methods for analyzing risks and interdependencies of critical infrastructures.  A number of analysis approaches are described and are adapted to each of these infrastructures. Various approaches are also revised, and all are supported by several examples and illustrations. Particular emphasis is given to the analysis of various interdependencies that often exist between the infrastructures.  Risk and Interdependencies in Critical Infrastructures: A  guideline for analysis provides a good tool to identify the hazards that are threatening your infrastructures, and will enhance the un...

Atomic mean-square displacements and the critical-voltage effect in cubic solid solutions

International Nuclear Information System (INIS)

Shirley, C.G.; Fisher, R.M.

1979-01-01

The critical-voltage phenomena observed in high-voltage electron microscope images of bend contours as well as in corresponding Kikuchi or convergent-beam diffraction patterns provide sensitive methods of determining submicroscopic alloy parameters such as Debye temperatures, short-range order, and atomic scattering factors. Only a very limited number of critical voltages can be observed in metal crystals in the voltage range usually available, 100 to 1200 kV, so that quantitative interpretation of the data must be based on a few-parameter model which incorporates all the pertinent factors. A satisfactory two-parameter model has been developed which can be used to interpret or compute the critical voltages of substitutional solid solutions as functions of composition, temperature and short-range order. In the alloy systems Fe-Cr, Ni-Au, Cu-Au and Cu-Al, sufficient critical voltage data are available to derive the model parameters which pertain to atomic bonding in the lattice. In addition to atomic scattering amplitudes, the critical voltage depends strongly on the atomic mean-square displacements. The static contribution to the mean-square displacements is large in alloys with large atomic-radius disparity, and is especially sensitive to short-range order in f.c.c. solid solutions. Well-defined best estimates for the model parameters are used to predict the critical voltage and its sensitivity to composition, temperature and short-range order for a large number of solid solutions. Systems for which critical-voltage studies may be of considerable interest are indicated. (author)

Experimental observation of pulsating instability under acoustic field in downward-propagating flames at large Lewis number

KAUST Repository

Yoon, Sung Hwan

2017-10-12

According to previous theory, pulsating propagation in a premixed flame only appears when the reduced Lewis number, β(Le-1), is larger than a critical value (Sivashinsky criterion: 4(1 +3) ≈ 11), where β represents the Zel\\'dovich number (for general premixed flames, β ≈ 10), which requires Lewis number Le > 2.1. However, few experimental observation have been reported because the critical reduced Lewis number for the onset of pulsating instability is beyond what can be reached in experiments. Furthermore, the coupling with the unavoidable hydrodynamic instability limits the observation of pure pulsating instabilities in flames. Here, we describe a novel method to observe the pulsating instability. We utilize a thermoacoustic field caused by interaction between heat release and acoustic pressure fluctuations of the downward-propagating premixed flames in a tube to enhance conductive heat loss at the tube wall and radiative heat loss at the open end of the tube due to extended flame residence time by diminished flame surface area, i.e., flat flame. The thermoacoustic field allowed pure observation of the pulsating motion since the primary acoustic force suppressed the intrinsic hydrodynamic instability resulting from thermal expansion. By employing this method, we have provided new experimental observations of the pulsating instability for premixed flames. The Lewis number (i.e., Le ≈ 1.86) was less than the critical value suggested previously.

Role of computers in quality assurance in the LLL Criticality Safety Program

International Nuclear Information System (INIS)

Koponen, B.L.

1978-01-01

Some of the aspects of computational criticality safety quality assurance that have been emphasized in recent years at LLL are summarized. In particular, computer code changes that have been made that help the criticality analyst reduce the number of errors that he makes and to locate those that he does make; and how a computerized ''benchmark'' data base aids him in the validation of his computational methods are discussed

Modeling of criticality accidents and their environmental consequences

International Nuclear Information System (INIS)

Thomas, W.; Gmal, B.

1987-01-01

In the Federal Republic of Germany, potential radiological consequences of accidental nuclear criticality have to be evaluated in the licensing procedure for fuel cycle facilities. A prerequisite to this evaluation is to establish conceivable accident scenarios. First, possibilities for a criticality exceeding the generally applied double contingency principle of safety are identified by screening the equipment and operation of the facility. Identification of undetected accumulations of fissile material or incorrect transfer of fissile solution to unfavorable geometry normally are most important. Second, relevant and credible scenarios causing the most severe consequences are derived from these possibilities. For the identified relevant scenarios, time-dependent fission rates and reasonable numbers for peak power and total fissions must be determined. Experience from real accidents and experiments (KEWB, SPERT, CRAC, SILENE) has been evaluated using empirical formulas. To model the time-dependent behavior of criticality excursions in fissile solutions, a computer program FELIX has been developed

Critical Phenomena of Rainfall in Ecuador

Science.gov (United States)

Serrano, Sh.; Vasquez, N.; Jacome, P.; Basile, L.

2014-02-01

Self-organized criticality (SOC) is characterized by a power law behavior over complex systems like earthquakes and avalanches. We study rainfall using data of one day, 3 hours and 10 min temporal resolution from INAMHI (Instituto Nacional de Meteorologia e Hidrologia) station at Izobamba, DMQ (Metropolitan District of Quito), satellite data over Ecuador from Tropical Rainfall Measure Mission (TRMM,) and REMMAQ (Red Metropolitana de Monitoreo Atmosferico de Quito) meteorological stations over, respectively. Our results show a power law behavior of the number of rain events versus mm of rainfall measured for the high resolution case (10 min), and as the resolution decreases this behavior gets lost. This statistical property is the fingerprint of a self-organized critical process (Peter and Christensen, 2002) and may serve as a benchmark for models of precipitation based in phase transitions between water vapor and precipitation (Peter and Neeling, 2006).

Evolvement of nuclear criticality safety programs

International Nuclear Information System (INIS)

Ketzlach, N.

1992-01-01

Nuclear criticality safety (NCS) has developed from a discipline requiring the services of personnel with only a background in reactor physics to that involving reactor physics, process engineering, and design as well as administration of the program to ensure all its requirements are implemented. When Oak Ridge National Laboratory (ORNL) was designed and constructed, the physicists at Los Alamos National Laboratory (LANL) were performing the criticality analyses. A physicist who had no chemical process or engineering experience was brought in from LANL to determine whether the facility would be safe. It was only because of his understanding of the reactor physics principles, scientific intuition, and some luck that the design and construction of the facility led to a safe plant. It took a number of years of experience with facility operations and the dedication of personnel for NCS to reach its present status as a recognized discipline

Program for Critical Technologies in Breast Oncology

Science.gov (United States)

1999-07-01

the tissues, and in a ethical manner that respects the patients’ rights . The Program for Critical Technologies in Breast Oncology helps address all of...diagnosis, database 15. NUMBER OF PAGES 148 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY CLASSIFICATION OF THIS...closer to clinical utility. Page 17 References Adida C. Crotty PL. McGrath J. Berrebi D. Diebold J. Altieri DC. Developmentally regulated

The use of spatio-temporal correlation to forecast critical transitions

Science.gov (United States)

Karssenberg, Derek; Bierkens, Marc F. P.

2010-05-01

spatio-temporal autocorrelation and variance are consistent predictors of a critical transition, even under the condition of a poorly defined system. Second, we perform data assimilation experiments using an artificial exhaustive data set generated by one realization of the model. To mimic real-world sampling, an observational data set is created from this exhaustive data set. This is done by sampling on a regular spatio-temporal grid, supplemented by sampling locations at a short distance. Spatial and temporal autocorrelation in this observational data set is calculated for different spatial and temporal separation (lag) distances. To assign appropriate weights to observations (here, autocorrelation values and variance) in the Particle Filter, the covariance matrix of the error in these observations is required. This covariance matrix is estimated using Monte Carlo sampling, selecting a different random position of the sampling network relative to the exhaustive data set for each realization. At each update moment in the Particle Filter, observed autocorrelation values are assimilated into the model and the state of the model is updated. Using this approach, it is shown that the use of autocorrelation reduces the uncertainty in the forecasted timing of a critical transition compared to runs without data assimilation. The performance of the use of spatial autocorrelation versus temporal autocorrelation depends on the timing and number of observational data. This study is restricted to a single model only. However, it is becoming increasingly clear that spatio-temporal autocorrelation and variance can be used as early warning signals for a large number of systems. Thus, it is expected that spatio-temporal autocorrelation and variance are valuable in data assimilation frameworks in a large number of dynamical systems.

Chain length dependence of the critical density of organic homologous series

DEFF Research Database (Denmark)

Kontogeorgis, Georgios M.; Fredenslund, Aage; Tassios, Dimitrios P.

1995-01-01

Whether the critical density of organic compounds belonging to a certain homologous series increases or decreases with (increasing) molecular weight has been a challenging question over the years. Two sets of experimental data have recently appeared in the literature for the critical density of n......-alkanes: Steele's data (up to n-decane) suggest that critical density increases with carbon number and reaches a limiting value. On the other hand, the data of Teja et al., 1990 which cover a broader range of n-alkanes (up to n-octadecane), reveal a decreasing trend of the critical density after a maximum at n......-heptane. Teja et al. have also presented critical density measurements for 1-alkenes (up to 1-decene) and 1-alkanols (up to 1-undecanol). These data follow the same decreasing trend with the molecular weight as n-alkanes. This trend is not in agreement with the predictions of most group-contribution methods...

Critical opalescence and the true dielectric state in a Coulomb system

Science.gov (United States)

Bobrov, V. B.; Trigger, S. A.

2015-04-01

To study the critical opalescence effect in a two-component Coulomb system consisting of single-type electrons and nuclei, we consider the limit relations for static structure factors and analyze the singularities of the dielectric permittivity. We show that the critical opalescence effect can be observed not only at the critical point corresponding to the gas-liquid phase transition but also near the true dielectric state with zero static conductivity. With the available experimental data taken into account, we assume that the true dielectric state is the limit state of the liquid-liquid phase transition accompanied by sharp variations in the electrical conduction of the substances. We find that if the thermodynamic parameters correspond to the true dielectric state, then the critical opalescence effect can arise in the case where the squared fluctuation in the total number of electrons and nuclei in a two-component Coulomb system becomes infinite, as this occurs at the critical point corresponding to the gas-liquid phase transition.

Criticism versus stylistics: an analysis of their areas of overlap and ...

African Journals Online (AJOL)

Criticism versus stylistics: an analysis of their areas of overlap and contrast. ... AFRREV LALIGENS: An International Journal of Language, Literature and Gender Studies ... in a number of areas, a great deal of discrepancy exists between them.

Criticality accident of nuclear fuel facility. Think back on JCO criticality accident

International Nuclear Information System (INIS)

Naito, Keiji

2003-09-01

This book is written in order to understand the fundamental knowledge of criticality safety or criticality accident of nuclear fuel facility by the citizens. It consists of four chapters such as critical conditions and criticality accident of nuclear facility, risk of criticality accident, prevention of criticality accident and a measure at an occurrence of criticality accident. A definition of criticality, control of critical conditions, an aspect of accident, a rate of incident, damage, three sufferers, safety control method of criticality, engineering and administrative control, safety design of criticality, investigation of failure of safety control of JCO criticality accident, safety culture are explained. JCO criticality accident was caused with intention of disregarding regulation. It is important that we recognize the correct risk of criticality accident of nuclear fuel facility and prevent disasters. On the basis of them, we should establish safety culture. (S.Y.)

The computation of bond percolation critical polynomials by the deletion–contraction algorithm

International Nuclear Information System (INIS)

Scullard, Christian R

2012-01-01

Although every exactly known bond percolation critical threshold is the root in [0,1] of a lattice-dependent polynomial, it has recently been shown that the notion of a critical polynomial can be extended to any periodic lattice. The polynomial is computed on a finite subgraph, called the base, of an infinite lattice. For any problem with exactly known solution, the prediction of the bond threshold is always correct for any base containing an arbitrary number of unit cells. For unsolved problems, the polynomial is referred to as the generalized critical polynomial and provides an approximation that becomes more accurate with increasing number of bonds in the base, appearing to approach the exact answer. The polynomials are computed using the deletion–contraction algorithm, which quickly becomes intractable by hand for more than about 18 bonds. Here, I present generalized critical polynomials calculated with a computer program for bases of up to 36 bonds for all the unsolved Archimedean lattices, except the kagome lattice, which was considered in an earlier work. The polynomial estimates are generally within 10 −5 –10 −7 of the numerical values, but the prediction for the (4,8 2 ) lattice, though not exact, is not ruled out by simulations. (paper)

The critical care cascade: a systems approach.

Science.gov (United States)

Ghosh, Rishi; Pepe, Paul

2009-08-01

To emphasize the evolving body of evidence that supports the need for a more seamless and interconnected continuum of patient care for a growing compendium of critical care conditions, starting in the prehospital and emergency department (ED) phases of management and continuing through ICU and rehabilitation services. The care of critically ill and injured patients has become increasingly complex. It now has been demonstrated that, for a number of such critical care conditions, optimal management not only relies heavily on the talents of highly coordinated, multidisciplinary teams, but it also may require shared responsibilities across a continuum of longitudinal care involving numerous specialties and departments. This continuum usually needs to begin in the prehospital and ED settings with management extending through specialized in-hospital diagnostic and interventional suites to traditional ICU and rehabilitation programs. In recent years, examples of these conditions have included the development of systems of care for trauma, cardiac arrest, myocardial infarction, stroke, sepsis syndromes, toxicology and other critical illnesses. Although the widespread implementation of such multidisciplinary, multispecialty critical care cascades of care has been achieved most commonly in trauma care, current healthcare delivery systems generally tend to employ compartmentalized organization for the majority of other critical care patients. Accordingly, optimal systematic care often breaks down in the management of these complex patients due to barriers such as lack of interoperable communication between teams, disjointed transfers between services, unnecessary time-consuming, re-evaluations and transitional pauses in time-dependent circumstances, deficiencies in cross-disciplinary education and quality assurance loops, and significant variability in patient care practices. Such barriers can lead to adverse outcomes in this fragile patient population. This article discusses

Critical Jostling

Directory of Open Access Journals (Sweden)

Pippin Barr

2016-11-01

Full Text Available Games can serve a critical function in many different ways, from serious games about real world subjects to self-reflexive commentaries on the nature of games themselves. In this essay we discuss critical possibilities stemming from the area of critical design, and more specifically Carl DiSalvo’s adversarial design and its concept of reconfiguring the remainder. To illustrate such an approach, we present the design and outcomes of two games, Jostle Bastard and Jostle Parent. We show how the games specifically engage with two previous games, Hotline Miami and Octodad: Dadliest Catch, reconfiguring elements of those games to create interactive critical experiences and extensions of the source material. Through the presentation of specific design concerns and decisions, we provide a grounded illustration of a particular critical function of videogames and hope to highlight this form as another valuable approach in the larger area of videogame criticism.

Toward critical bioethics.

Science.gov (United States)

Árnason, Vilhjálmur

2015-04-01

This article deals with the question as to what makes bioethics a critical discipline. It considers different senses of criticism and evaluates their strengths and weaknesses. A primary method in bioethics as a philosophical discipline is critical thinking, which implies critical evaluation of concepts, positions, and arguments. It is argued that the type of analytical criticism that restricts its critical role to critical thinking of this type often suffers from other intellectual flaws. Three examples are taken to demonstrate this: premature criticism, uncritical self-understanding of theoretical assumptions, and narrow framing of bioethical issues. Such flaws can lead both to unfair treatment of authors and to uncritical discussion of topics. In this context, the article makes use of Häyry's analysis of different rationalities in bioethical approaches and argues for the need to recognize the importance of communicative rationality for critical bioethics. A radically different critical approach in bioethics, rooted in social theory, focuses on analyses of power relations neglected in mainstream critical thinking. It is argued that, although this kind of criticism provides an important alternative in bioethics, it suffers from other shortcomings that are rooted in a lack of normative dimensions. In order to complement these approaches and counter their shortcomings, there is a need for a bioethics enlightened by critical hermeneutics. Such hermeneutic bioethics is aware of its own assumptions, places the issues in a wide context, and reflects critically on the power relations that stand in the way of understanding them. Moreover, such an approach is dialogical, which provides both a critical exercise of speech and a normative dimension implied in the free exchange of reasons and arguments. This discussion is framed by Hedgecoe's argument that critical bioethics needs four elements: to be empirically rooted, theory challenging, reflexive, and politely skeptical.

Critical thinking: assessing the risks to the future security of supply of critical metals

Science.gov (United States)

Gunn, Gus

2015-04-01

Increasing world population, the spread of prosperity across the globe and the demands of new technologies have led to a revival of concerns about the availability of raw materials needed by society. Despite scare stories about resource depletion, physical exhaustion of minerals is considered to be unlikely. However, we do need to know which materials might be of concern so that we can develop strategies to secure adequate supplies and to mitigate the effects of supply disruption. This requirement has led to renewed interest in criticality, a term that is generally used to refer to metals and minerals of high economic importance that have a relatively high likelihood of supply disruption. The European Union (EU) developed a quantitative methodology for the assessment of criticality which led to the definition of 14 raw materials as critical to the EU economy (EC, 2010). This has succeeded in raising awareness of potential supply issues and in helping to prioritise requirements for new policies and supporting research. The EU has recently assessed a larger number of candidate materials of which 20 are now identified as critical to the EU (EC, 2014). These include metals such as indium, mostly used in flat-screen displays, antimony for flame retardants and cobalt for rechargeable batteries, alloys and a host of other products. Although there is no consensus on the methodology for criticality assessments and broad analyses at this scale are inevitably imperfect, they can, nevertheless, provide early warning of supply problems. However, in order to develop more rigorous and dynamic assessments of future availability detailed analysis of the whole life-cycle of individual metals to identify specific problems and develop appropriate solutions is required. New policies, such as the Raw Materials Initiative (2008) and the European Innovation Partnership on Raw Materials (2013), have been developed by the European Commission (EC) and are aimed at securing sustainable

The impact of natural hazard on critical infrastructure systems: definition of an ontology

Science.gov (United States)

Dimauro, Carmelo; Bouchon, Sara; Frattini, Paolo; Giusto, Claudia

2013-04-01

According to the Council of the European Union Directive (2008), 'critical infrastructure' means an asset, system or part thereof which is essential for the maintenance of vital societal functions, health, safety, security, economic or social well-being of people, and the disruption or destruction of which would have a significant impact as a result of the failure to maintain those functions. Critical infrastructure networks are exposed to natural events, such as floods, storms, landslides, earthquakes, etc. Recent natural disasters show that socio-economic consequences can be very much aggravated by the impact on these infrastructures. Though, there is still a lack of a recognized approach or methodology to assess the vulnerability of critical infrastructure assets against natural threats. The difficulty to define such an approach is increased by the need to consider a very high number of natural events, which differ in nature, magnitude and probability, as well as the need to assess the vulnerability of a high variety of infrastructure assets (e.g. bridges, roads, tunnels, pipelines, etc.) To meet this challenge, the objective of the THREVI2 EU-CIPS project is to create a database linking the relationships between natural hazards and critical infrastructure assets. The query of the database will allow the end-users (critical infrastructure protection authorities and operators) to identify the relevant scenarios according to the own priorities and criteria. The database builds on an ontology optimized for the assessment of the impact of threats on critical infrastructures. The ontology aims at capturing the existing knowledge on natural hazards, critical infrastructures assets and their related vulnerabilities. Natural phenomena that can threaten critical infrastructures are classified as "events", and organized in a genetic-oriented hierarchy. The main attributes associated to each event are the probability, the magnitude and the "modus". The modus refers to the

Criticality analyses of regions containing uranium in the earth history

International Nuclear Information System (INIS)

Ravnik, M.

2005-01-01

Investigations of necessary conditions for a self-sustained chain reaction in the Earth inner regions hypothetically containing uranium is presented for the time interval from Earth formation to present time. It is determined that criticality was theoretically possible up to 2.5 Ga before present if uranium concentrated in pure form. In the early geological history (4 Ga before present) the self-sustained criticality could occur even if uranium was diluted up to 1:20 by the average core material or 1:60 by the average mantle material. If other metallic materials of similar density as uranium (e.g., Au, W) or similar atomic weight (e.g., Th) concentrated from the primordial mixture in equal proportion as uranium, criticality was not possible for any period in Earth history provided that the basic material contained no light nuclides (H, C). Criticality in the Earth inner regions could have established only if uranium concentrated from the basic material more effectively than elements of similar density or atomic number. (orig.)

Classification for Safety-Critical Car-Cyclist Scenarios Using Machine Learning

NARCIS (Netherlands)

Cara, I.; Gelder, E.D.

2015-01-01

The number of fatal car-cyclist accidents is increasing. Advanced Driver Assistance Systems (ADAS) can improve the safety of cyclists, but they need to be tested with realistic safety-critical car-cyclist scenarios. In order to store only relevant scenarios, an online classification algorithm is

Effects of Froude number and geometry on water entry of a 2-D ellipse

Science.gov (United States)

Zhang, Xu; Liu, Pei-qing; Qu, Qiu-lin; Wang, Rui; Agarwal, Ramesh K.

2018-05-01

By using the finite volume method with volume of fluid model and global dynamic mesh technique, the effects of Froude number and geometry on the water entry process of a 2-D ellipse are investigated numerically. For the time history of the vertical force, the computational fluid dynamics (CFD) results match the experimental data much better than the classical potential-flow theories due to the consideration of the viscosity, turbulence, surface tension, gravity, and compressibility. The results show that the position of peak pressure on ellipse shifts from the spray root to the bottom of ellipse at a critical time. The critical time changes with the geometry and Froude number. By studying the vertical force, the ellipse water entry process can be divided into the initial and late stages based on the critical dimensionless time of about 0.1. The geometry of the ellipse plays a dominant role in the initial stage, while the Froude number is more important in the late stage of entry. The classical Wagner theory is extended to the ellipse water entry, and the predicted maximum value of vertical force coefficient in the initial stage is 4πa/b that matches the CFD results very well, where a and b are the horizontal axis and vertical axis of the ellipse parallel and perpendicular to the initial calm water surface, respectively.

Non-linear quantum critical dynamics and fluctuation-dissipation ratios far from equilibrium

Energy Technology Data Exchange (ETDEWEB)

Zamani, Farzaneh [Max Planck Institute for the Physics of Complex Systems, Nöthnitzer Str. 38, 01187 Dresden (Germany); Max Planck Institute for Chemical Physics of Solids, Nöthnitzer Str. 40, 01187 Dresden (Germany); Ribeiro, Pedro [CeFEMA, Instituto Superior Tcnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Russian Quantum Center, Novaya Street 100 A, Skolkovo, Moscow Area, 143025 (Russian Federation); Kirchner, Stefan, E-mail: stefan.kirchner@correlated-matter.com [Center for Correlated Matter, Zhejiang University, Hangzhou, Zhejiang 310058 (China)

2016-02-15

Non-thermal correlations of strongly correlated electron systems and the far-from-equilibrium properties of phases of condensed matter have become a topical research area. Here, an overview of the non-linear dynamics found near continuous zero-temperature phase transitions within the context of effective temperatures is presented. In particular, we focus on models of critical Kondo destruction. Such a quantum critical state, where Kondo screening is destroyed in a critical fashion, is realized in a number of rare earth intermetallics. This raises the possibility of experimentally testing for the existence of fluctuation-dissipation relations far from equilibrium in terms of effective temperatures. Finally, we present an analysis of a non-interacting, critical reference system, the pseudogap resonant level model, in terms of effective temperatures and contrast these results with those obtained near interacting quantum critical points. - Highlights: • Critical Kondo destruction explains the unusual properties of quantum critical heavy fermion compounds. • We review the concept of effective temperatures in models of critical Kondo destruction. • We compare effective temperatures found near non-interacting and fully interacting fixed points. • A comparison with non-interacting quantum impurity models is presented.

Critical Education, Critical Pedagogies, Marxist Education in the United States

Science.gov (United States)

Foley, Jean Ann; Morris, Doug; Gounari, Panayota; Agostinone-Wilson, Faith

2015-01-01

As critical pedagogy becomes more mainstream on the educational landscape in the United States, it is important to revisit the original tenets of critical pedagogy and explore their current manifestations. Since the beginning of "criticalism" from the theoretical/foundational work of the Frankfurt School of Critical Social Theory,…

Critical slowing down in driven-dissipative Bose-Hubbard lattices

Science.gov (United States)

Vicentini, Filippo; Minganti, Fabrizio; Rota, Riccardo; Orso, Giuliano; Ciuti, Cristiano

2018-01-01

We explore theoretically the dynamical properties of a first-order dissipative phase transition in coherently driven Bose-Hubbard systems, describing, e.g., lattices of coupled nonlinear optical cavities. Via stochastic trajectory calculations based on the truncated Wigner approximation, we investigate the dynamical behavior as a function of system size for one-dimensional (1D) and 2D square lattices in the regime where mean-field theory predicts nonlinear bistability. We show that a critical slowing down emerges for increasing number of sites in 2D square lattices, while it is absent in 1D arrays. We characterize the peculiar properties of the collective phases in the critical region.

New relation for critical exponents in the Ising model

International Nuclear Information System (INIS)

Pishtshev, A.

2007-01-01

The Ising model in a transverse field is considered at T=0. From the analysis of the power low behaviors of the energy gap and the order parameter as functions of the field a new relation between the respective critical exponents, β>=1/(8s 2 ), is derived. By using the Suzuki equivalence from this inequality a new relation for critical exponents in the Ising model, β>=1/(8ν 2 ), is obtained. A number of numerical examples for different cases illustrates the generality and validity of the relation. By applying this relation the estimation ν=(1/4) 1/3 ∼0.62996 for the 3D-Ising model is proposed

Critically Important Object Security System Element Model

Directory of Open Access Journals (Sweden)

I. V. Khomyackov

2012-03-01

Full Text Available A stochastic model of critically important object security system element has been developed. The model includes mathematical description of the security system element properties and external influences. The state evolution of the security system element is described by the semi-Markov process with finite states number, the semi-Markov matrix and the initial semi-Markov process states probabilities distribution. External influences are set with the intensity of the Poisson thread.

Spin-resolved entanglement spectroscopy of critical spin chains and Luttinger liquids

International Nuclear Information System (INIS)

Laflorencie, Nicolas; Rachel, Stephan

2014-01-01

Quantum critical chains are well-described and understood by virtue of conformal field theory. Still, the meaning of the real space entanglement spectrum—the eigenvalues of the reduced density matrix—of such systems remains elusive in general, even when there is an additional quantum number available such as the spin or particle number. In this paper, we explore in detail the properties and structure of the reduced density matrix of critical XXZ spin- (1/2) chains. We investigate the quantum/thermal correspondence between the reduced density matrix of a T = 0 pure quantum state and the thermal density matrix of an effective entanglement Hamiltonian. Using large scale DMRG and QMC simulations, we investigate the conformal structure of the spectra, the entanglement Hamiltonian, and temperature. We then introduce the notion of spin-resolved entanglement entropies, which display interesting scaling features. (paper)

Coincidence logic modules for criticality alarming

International Nuclear Information System (INIS)

Schaief, C.C. III.

1977-04-01

A coincidence Logic Module and a companion contact closure Relay Module utilizing the NIM Standard have been developed for criticality alarming. The units provide an ALARM whenever two or more out of N detectors become activated. In addition, an ALERT is generated whenever one or more detectors is activated or when certain electronic component failures occur. The number of detector inputs (N) can be expanded in groups of six by adding modules. Serial and parallel redundancy were used to reduce the probability of system failure

The Generalized Higher Criticism for Testing SNP-Set Effects in Genetic Association Studies

Science.gov (United States)

Barnett, Ian; Mukherjee, Rajarshi; Lin, Xihong

2017-01-01

It is of substantial interest to study the effects of genes, genetic pathways, and networks on the risk of complex diseases. These genetic constructs each contain multiple SNPs, which are often correlated and function jointly, and might be large in number. However, only a sparse subset of SNPs in a genetic construct is generally associated with the disease of interest. In this article, we propose the generalized higher criticism (GHC) to test for the association between an SNP set and a disease outcome. The higher criticism is a test traditionally used in high-dimensional signal detection settings when marginal test statistics are independent and the number of parameters is very large. However, these assumptions do not always hold in genetic association studies, due to linkage disequilibrium among SNPs and the finite number of SNPs in an SNP set in each genetic construct. The proposed GHC overcomes the limitations of the higher criticism by allowing for arbitrary correlation structures among the SNPs in an SNP-set, while performing accurate analytic p-value calculations for any finite number of SNPs in the SNP-set. We obtain the detection boundary of the GHC test. We compared empirically using simulations the power of the GHC method with existing SNP-set tests over a range of genetic regions with varied correlation structures and signal sparsity. We apply the proposed methods to analyze the CGEM breast cancer genome-wide association study. Supplementary materials for this article are available online. PMID:28736464

Progress Report on the US Critical Zone Observatory Program

Science.gov (United States)

Barrera, E. C.

2014-12-01

The Critical Zone Observatory (CZO) program supported by the National Science Foundation originated from the recommendation of the Earth Science community published in the National Research Council report "Basic Research Opportunities in Earth Sciences" (2001) to establish natural laboratories to study processes and systems of the Critical Zone - the surface and near-surface environment sustaining nearly all terrestrial life. After a number of critical zone community workshops to develop a science plan, the CZO program was initiated in 2007 with three sites and has now grown to 10 sites and a National Office, which coordinates research, education and outreach activities of the network. Several of the CZO sites are collocated with sites supported by the US Long Term Ecological Research (LTER) and the Long Term Agricultural Research (LTAR) programs, and the National Ecological Observatory Network (NEON). Future collaboration with additional sites of these networks will add to the potential to answer questions in a more comprehensive manner and in a larger regional scale about the critical zone form and function. At the international level, CZOs have been established in many countries and strong collaborations with the US program have been in place for many years. The next step is the development of a coordinated international program of critical zone research. The success of the CZO network of sites can be measured in transformative results that elucidate properties and processes controlling the critical zone and how the critical zone structure, stores and fluxes respond to climate and land use change. This understanding of the critical zone can be used to enhance resilience and sustainability, and restore ecosystem function. Thus, CZO science can address major societal challenges. The US CZO network is a facility open to research of the critical zone community at large. Scientific data and information about the US program are available at www.criticalzone.org.

Causal explanation, intentionality, and prediction: Evaluating the Criticism of "Deductivism"

DEFF Research Database (Denmark)

Koch, Carsten Allan

2001-01-01

In a number of influential contributions, Tony Lawson has attacked a view of science that he refers to as deductivism, and criticized economists for implicitly using it in their research. Lawson argues that deductivism is simply the covering-law model, also known as the causal model of scientific...... critisizes the use of universal laws in social science, especially in economics. This view cannot be as easily dismissed as his general criticism of causal explanation. We argue that a number of arguments often used against the existence of (correct) universal laws in the social sciences can be put...... into question. First, it is argued that entities need not be identical, or even remotely alike, to be applicable to the same law. What is necessary is that they have common properties, e.g. mass in physics, and that the law relates to that property (section 6). Second, one might take the so-called model...

Allee effect in the selection for prime-numbered cycles in periodical cicadas.

Science.gov (United States)

Tanaka, Yumi; Yoshimura, Jin; Simon, Chris; Cooley, John R; Tainaka, Kei-ichi

2009-06-02

Periodical cicadas are well known for their prime-numbered life cycles (17 and 13 years) and their mass periodical emergences. The origination and persistence of prime-numbered cycles are explained by the hybridization hypothesis on the basis of their lower likelihood of hybridization with other cycles. Recently, we showed by using an integer-based numerical model that prime-numbered cycles are indeed selected for among 10- to 20-year cycles. Here, we develop a real-number-based model to investigate the factors affecting the selection of prime-numbered cycles. We include an Allee effect in our model, such that a critical population size is set as an extinction threshold. We compare the real-number models with and without the Allee effect. The results show that in the presence of an Allee effect, prime-numbered life cycles are most likely to persist and to be selected under a wide range of extinction thresholds.

Gifted and Talented Education in Turkey: Critics and Prospects

Directory of Open Access Journals (Sweden)

Uğur Sak

2015-12-01

Full Text Available This article is a review and critics of gifted education in Turkey. Gifted education in Turkey has undergone dramatic changes in recent years. Innovations and regulations in the education of gifted and talented students have emerged and been formed as a result of a global agenda of the country. New steps such as the establishment of science high schools have been taken at specific critical point in history. With the beginning of the 21st century, the education of gifted students has gained momentum with the national strategic plan on gifted education and establishment of gifted education departments in universities. In the last fifteen years, the number of special programs and scientific publications has multiplied. Even though gifted education in Turkey has progressed notably over years, certain problems still remain unsolved, such as inconsistencies in definitions and contradictions between definitions and practices, inefficiency in nationwide identification, inadequate number of program types, recruitment of untrained teachers and lack of expertise in program development, and opposition against gifted education.

Review of studies on criticality safety evaluation and criticality experiment methods

International Nuclear Information System (INIS)

Naito, Yoshitaka; Yamamoto, Toshihiro; Misawa, Tsuyoshi; Yamane, Yuichi

2013-01-01

Since the early 1960s, many studies on criticality safety evaluation have been conducted in Japan. Computer code systems were developed initially by employing finite difference methods, and more recently by using Monte Carlo methods. Criticality experiments have also been carried out in many laboratories in Japan as well as overseas. By effectively using these study results, the Japanese Criticality Safety Handbook was published in 1988, almost the intermediate point of the last 50 years. An increased interest has been shown in criticality safety studies, and a Working Party on Nuclear Criticality Safety (WPNCS) was set up by the Nuclear Science Committee of Organisation Economic Co-operation and Development in 1997. WPNCS has several task forces in charge of each of the International Criticality Safety Benchmark Evaluation Program (ICSBEP), Subcritical Measurement, Experimental Needs, Burn-up Credit Studies and Minimum Critical Values. Criticality safety studies in Japan have been carried out in cooperation with WPNCS. This paper describes criticality safety study activities in Japan along with the contents of the Japanese Criticality Safety Handbook and the tasks of WPNCS. (author)

Nitrogen critical loads using biodiversity-related critical limits

International Nuclear Information System (INIS)

Posch, Maximilian; Aherne, Julian; Hettelingh, Jean-Paul

2011-01-01

Critical loads are widely used in the effects-based assessment of emission reduction policies. While the impacts of acidification have diminished, there is increasing concern regarding the effects of nitrogen deposition on terrestrial ecosystems. In this context much attention has been focussed on empirical critical loads as well as simulations with linked geochemistry-vegetation models. Surprisingly little attention has been paid to adapt the widely used simple mass balance approach. This approach has the well-established benefit of easy regional applicability, while incorporating specified critical chemical criteria to protect specified receptors. As plant occurrence/biodiversity is related to both the nutrient and acidity status of an ecosystem, a single abiotic factor (chemical criterion) is not sufficient. Rather than an upper limit for deposition (i.e., critical load), linked nutrient nitrogen and acidity chemical criteria for plant occurrence result in an 'optimal' nitrogen and sulphur deposition envelope. - Highlights: → Mass balance critical load approaches for nutrient nitrogen remain useful. → Biodiversity-related limits are related to nutrient and acidity status. → Nutrient and acidity chemical criteria lead to optimal deposition envelopes. → Optimal loads support effects-based emission reduction policies. - Biodiversity-related critical limits lead to optimal nitrogen and sulphur deposition envelopes for plant species or species compositions.

Identifying critical thinking indicators and critical thinker attributes in nursing practice.

Science.gov (United States)

Chao, Shu-Yuan; Liu, Hsing-Yuan; Wu, Ming-Chang; Clark, Mary Jo; Tan, Jung-Ying

2013-09-01

Critical thinking is an essential skill in the nursing process. Although several studies have evaluated the critical thinking skills of nurses, there is limited information related to the indicators of critical thinking or evaluation of critical thinking in the context of the nursing process. This study investigated the potential indicators of critical thinking and the attributes of critical thinkers in clinical nursing practice. Knowledge of these indicators can aid the development of tools to assess nursing students' critical thinking skills. The study was conducted between September 2009 and August 2010. In phase 1, a literature review and four focus groups were conducted to identify the indicators of critical thinking in the context of nursing and the attributes of critical thinkers. In phase 2, 30 nursing professionals participated in a modified Delphi research survey to establish consensus and the appropriateness of each indicator and attribute identified in phase 1. We identified 37 indicators of critical thinking and 10 attributes of critical thinkers. The indicators were categorized into five subscales within the context of the nursing process toreflect nursing clinical practice: assessment, 16 indicators of ability to apply professional knowledge and skills to analyze and interpret patient problems; diagnosis, five indicators of ability to propose preliminary suppositions; planning, five indicators of ability to develop problem-solving strategies; implementation, five indicators of ability to implement planning; and evaluation, six indicators of ability to self-assess and reflect. The study operationalized critical thinking into a practical indicator suitable for nursing contexts in which critical thinking is required for clinical problem solving. Identified indicators and attributes can assist clinical instructors to evaluate student critical thought skills and development-related teaching strategies.

Using Discussions to Promote Critical Thinking in an Online Environment

Directory of Open Access Journals (Sweden)

Nega Debela

2008-06-01

Full Text Available This paper examines how the discussion tool is used to promote critical thinking in an online environment at Marshall University. The significance of critical thinking in higher education has been brought to attention at both national and local levels. The paper studies the use of discussions as an approach to promote critical thinking in a number of English as a Second Language (ESL courses offered by Marshall University's Graduate School of Education and Professional Development (GSEPD program. At the end of the semester, a qualitative survey was developed to identify the effectiveness of such discussions, and the opportunities for improvement. The survey was sent to all students in these three classes. These students were all full time teachers in Elementary and Secondary schools in West Virginia. Out of 21 students, 15 of them have responded to the three questions asked in the survey. Almost all the respondents have found discussion helpful in enhancing learning and critical thinking. Most students support the involvement of an online instructor in the online discussion, and faculty members involved in these discussions function as helpers in the development of critical thinking skills.

Odd number of coupled antiferromagnetic anisotropic Heisenberg chains: Spin wave theory

International Nuclear Information System (INIS)

Benyoussef, A.

1996-10-01

The effect of the chain and perpendicular anisotropies on the energy gap for odd number of coupled quantum spin-1/2 antiferromagnetic anisotropic Heisenberg chains is investigated using a spin wave theory. The energy gap opens above a critical anisotropic value. The known results of the isotropic case have been obtained. (author). 11 refs, 4 figs

Uncertainties in criticality analysis which affect the storage and transportation of LWR fuel

International Nuclear Information System (INIS)

Napolitani, D.G.

1989-01-01

Satisfying the design criteria for subcriticality with uncertainties affects: the capacity of LWR storage arrays, maximum allowable enrichment, minimum allowable burnup and economics of various storage options. There are uncertainties due to: calculational method, data libraries, geometric limitations, modelling bias, the number and quality of benchmarks performed and mechanical uncertainties in the array. Yankee Atomic Electric Co. (YAEC) has developed and benchmarked methods to handle: high density storage rack designs, pin consolidation, low density moderation and burnup credit. The uncertainties associated with such criticality analysis are quantified on the basis of clean criticals, power reactor criticals and intercomparison of independent analysis methods

Sleep Scheduling in Critical Event Monitoring with Wireless Sensor Networks

NARCIS (Netherlands)

Guo, Peng; Jiang, Tao; Zhang, Qian; Zhang, Kui

In this paper, we focus on the applications of wireless sensor networks (WSNs) for critical event monitoring, where normally there are only small number of packets need to be transmitted, while when urgent event occurs, the alarm should be broadcast to the entire network as soon as possible. During

On the Problem of Determining Aggregation Numbers from Surface Tension Measurements.

Science.gov (United States)

Rusanov, Anatoly I

2017-11-07

In view of the recent discovery of variable aggregation numbers in the vicinity of the critical micelle concentration (CMC), the mass-action-law theory of the surface tension isotherm of a micellar solution with variable aggregation numbers is formulated both for nonionic and ionic surfactants. It is shown that the shape of the surface tension isotherm should be concave in the logarithmic scale above the CMC. Considering a change in the isotherm slope at the CMC apparent break point, the problems of determining the aggregation number for nonionic micelles and the degree of counterion binding for ionic micelles are discussed. In case of the aggregation number variability near the CMC, finding the aggregation number above the CMC apparent break point is considered and a computational scheme is elaborated, requiring a higher precision for experiment. Some experimental data from the literature are analyzed, and the method of estimating the degree of counterion binding is improved.

Effect of Reynolds Number on Aerodynamics of Airfoil with Gurney Flap

Directory of Open Access Journals (Sweden)

Shubham Jain

2015-01-01

Full Text Available Steady state, two-dimensional computational investigations performed on NACA 0012 airfoil to analyze the effect of variation in Reynolds number on the aerodynamics of the airfoil without and with a Gurney flap of height of 3% chord are presented in this paper. RANS based one-equation Spalart-Allmaras model is used for the computations. Both lift and drag coefficients increase with Gurney flap compared to those without Gurney flap at all Reynolds numbers at all angles of attack. The zero lift angle of attack seems to become more negative as Reynolds number increases due to effective increase of the airfoil camber. However the stall angle of attack decreased by 2° for the airfoil with Gurney flap. Lift coefficient decreases rapidly and drag coefficient increases rapidly when Reynolds number is decreased below critical range. This occurs due to change in flow pattern near Gurney flap at low Reynolds numbers.

Critical incidents and mortality reporting in pediatric anesthesia: the Australian experience.

Science.gov (United States)

Ragg, Philip

2011-07-01

Since 1960, the collection and analysis of mortality data for anesthesia in Australia has been of significant benefit to practising anesthetists. These figures include pediatric deaths which fortunately have been rare and often inevitable because of severe underlying disease and patient risk factors. The reporting of critical incidents and serious morbidity, on the other hand, has been far less impressive. Only one state in Australia, Victoria, currently has a committee that collects morbidity data and, as this reporting is voluntary, is likely to under-represent the true numbers of critical events. There is no specific pediatric morbidity database in Australia so much of this discussion will be regarding overall anesthesia critical event reporting which includes pediatrics as a subset. © 2011 Blackwell Publishing Ltd.

Exploring critical thinking in critical care nursing education: a pilot study.

Science.gov (United States)

Rogal, Sonya M; Young, Jeanne

2008-01-01

Critical care nurses process vast amounts of information and require well developed critical-thinking skills to make clinical decisions. Using a pretest posttest design, the critical-thinking skills of 31 postgraduate nurses were evaluated using the California Critical Thinking Skills Test (CCTST). For the total group, mean critical-thinking scores improved slightly over time. The CCTST revealed a mean pretest score of 18.5 and a mean posttest score of 19.7, both of which were higher than the established norms for the test. Overall, no significant difference was observed between pretest and posttest. However, statistical significance was observed posttest for nurses whose critical-thinking scores improved (p critical-thinking skills during the course of their study.

Formal Methods for Life-Critical Software

Science.gov (United States)

Butler, Ricky W.; Johnson, Sally C.

1993-01-01

The use of computer software in life-critical applications, such as for civil air transports, demands the use of rigorous formal mathematical verification procedures. This paper demonstrates how to apply formal methods to the development and verification of software by leading the reader step-by-step through requirements analysis, design, implementation, and verification of an electronic phone book application. The current maturity and limitations of formal methods tools and techniques are then discussed, and a number of examples of the successful use of formal methods by industry are cited.

Phases of a stack of membranes in a large number of dimensions of configuration space

Science.gov (United States)

Borelli, M. E.; Kleinert, H.

2001-05-01

The phase diagram of a stack of tensionless membranes with nonlinear curvature energy and vertical harmonic interaction is calculated exactly in a large number of dimensions of configuration space. At low temperatures, the system forms a lamellar phase with spontaneously broken translational symmetry in the vertical direction. At a critical temperature, the stack disorders vertically in a meltinglike transition. The critical temperature is determined as a function of the interlayer separation l.

Universality classes and critical phenomena in confined liquid systems

Directory of Open Access Journals (Sweden)

A.V. Chalyi

2013-06-01

Full Text Available It is well known that the similar universal behavior of infinite-size (bulk systems of different nature requires the same basic conditions: space dimensionality; number components of order parameter; the type (short- or long-range of the intermolecular interaction; symmetry of the fluctuation part of thermodynamical potential. Basic conditions of similar universal behavior of confined systems needs the same supplementary conditions such as the number of monolayers for a system confinement; low crossover dimensionality, i.e., geometric form of restricted volume; boundary conditions on limiting surfaces; physical properties under consideration. This review paper is aimed at studying all these conditions of similar universal behavior for diffusion processes in confined liquid systems. Special attention was paid to the effects of spatial dispersion and low crossover dimensionality. This allowed us to receive receiving correct nonzero expressions for the diffusion coefficient at the critical point and to take into account the specific geometric form of the confined liquid volume. The problem of 3D⇔2D dimensional crossover was analyzed. To receive a smooth crossover for critical exponents, the Kawasaki-like approach from the theory of mode coupling in critical dynamics was proposed. This ensured a good agreement between data of computer experiment and theoretical calculations of the size dependence of the critical temperature Tc(H of water in slitlike pores. The width of the quasi-elastic scattering peak of slow neutrons near the structural phase transition in the aquatic suspensions of plasmatic membranes (mesostructures with the typical thickness up to 10 nm was studied. It was shown that the width of quasi-elastic peak of neutron scattering decreases due to the process of cell proliferation, i.e., with an increase of the membrane size (including the membrane thickness. Thus, neutron studies could serve as an additional diagnostic test for the

Fluorescent visualization of a spreading surfactant

Energy Technology Data Exchange (ETDEWEB)

Fallest, David W; Lichtenberger, Adele M; Fox, Christopher J; Daniels, Karen E, E-mail: kdaniel@ncsu.ed [Department of Physics, North Carolina State University, Raleigh, NC 27695 (United States)

2010-07-15

The spreading of surfactants on thin films is an industrially and medically important phenomenon, but the dynamics are highly nonlinear and visualization of the surfactant dynamics has been a long-standing experimental challenge. We perform the first quantitative, spatiotemporally resolved measurements of the spreading of an insoluble surfactant on a thin fluid layer. During the spreading process, we directly observe both the radial height profile of the spreading droplet and the spatial distribution of the fluorescently tagged surfactant. We find that the leading edge of a spreading circular layer of surfactant forms a Marangoni ridge in the underlying fluid, with a trough trailing the ridge as expected. However, several novel features are observed using the fluorescence technique, including a peak in the surfactant concentration that trails the leading edge, and a flat, monolayer-scale spreading film that differs from concentration profiles predicted by current models. Both the Marangoni ridge and the surfactant leading edge can be described to spread as R{approx}t{sup {delta}}. We find spreading exponents {delta}{sub H}{approx}0.30 and {delta}{sub {Gamma}}{approx}0.22 for the ridge peak and surfactant leading edge, respectively, which are in good agreement with theoretical predictions of {delta}=1/4. In addition, we observe that the surfactant leading edge initially leads the peak of the Marangoni ridge, with the peak later catching up to the leading edge.

What Makes Critical Thinking Critical for Adult ESL Students

Science.gov (United States)

Miekley, Joshua P.

2014-01-01

Critical-thinking skills help to prepare adult education students for a successful transition to college degree programs and for job advancement. Yet fostering critical thinking poses a challenge to ESL instructors. Brookfield (2012) provides a way forward for adult educators when he explains that the crux of critical thinking is to discover one's…

Remarks on fermion-number violation and premature unitarization in high-energy instanton-induced scattering

International Nuclear Information System (INIS)

Maggiore, M.; Shifman, M.

1993-01-01

We critically discuss recent works in which the premature unitarization mechanism is studied with the inclusion of non-nearest-neighbor interactions or beyond leading order in the energy. We also point out that the nonperturbative valley method gives inconsistent results when applied to fermion-number-violating amplitudes, and we argue that, independently of the mechanism of premature unitarization, the nonperturbative amplitudes which violate the fermion number are always exponentially suppressed

Mortality after major amputation in elderly patients with critical limb ischemia

NARCIS (Netherlands)

S. Klaphake (Sanne); de Leur, K. (Kevin); P.G.H. Mulder (Paul); G.H. Ho (Gwan); H.G.W. de Groot (Hans); E.J. Veen (Eelco J.); H.J.M. Verhagen (Hence); L. van der Laan (Lyckle)

2017-01-01

markdownabstractBackground: Owing to the aging population, the number of elderly patients with critical limb ischemia (CLI) has increased. The consequence of amputation is immense. However, at the moment, information about the mortality after amputation in the elderly vascular patients is unknown.

Big Data and Data Science in Critical Care.

Science.gov (United States)

Sanchez-Pinto, L Nelson; Luo, Yuan; Churpek, Matthew M

2018-05-09

The digitalization of the healthcare system has resulted in a deluge of clinical Big Data and has prompted the rapid growth of data science in medicine. Data science, which is the field of study dedicated to the principled extraction of knowledge from complex data, is particularly relevant in the critical care setting. The availability of large amounts of data in the intensive care unit, the need for better evidence-based care, and the complexity of critical illness makes the use of data science techniques and data-driven research particularly appealing to intensivists. Despite the increasing number of studies and publications in the field, so far there have been few examples of data science projects that have resulted in successful implementations of data-driven systems in the intensive care unit. However, given the expected growth in the field, intensivists should be familiar with the opportunities and challenges of Big Data and data science. In this paper, we review the definitions, types of algorithms, applications, challenges, and future of Big Data and data science in critical care. Copyright © 2018. Published by Elsevier Inc.

Coast Guard Proceedings. Volume 68, Number 1, Spring 2011

Science.gov (United States)

2011-01-01

largest mar- ijuana seizure by a USCG buoy tender, CGC Aspen intercepted a “go-fast” vessel loaded with eight tons of marijuana . · Fisheries Enforcement...recommended routes; · amplifying vessel static and voyage-related data; · VTS or synthetic targets (vessels without AIS); · pertinent time-critical dynamic...Used by a ship to report the number of persons on board (e.g., on request by a competent authority). VTS-generated/ synthetic targets Used to transmit

Electromagnetic waves destabilized by runaway electrons in near-critical electric fields

Energy Technology Data Exchange (ETDEWEB)

Komar, A.; Pokol, G. I. [Department of Nuclear Techniques, Budapest University of Technology and Economics, Association EURATOM, H-1111 Budapest (Hungary); Fueloep, T. [Department of Applied Physics, Nuclear Engineering, Chalmers University of Technology and Euratom-VR Association, Goeteborg (Sweden)

2013-01-15

Runaway electron distributions are strongly anisotropic in velocity space. This anisotropy is a source of free energy that may destabilize electromagnetic waves through a resonant interaction between the waves and the energetic electrons. In this work, we investigate the high-frequency electromagnetic waves that are destabilized by runaway electron beams when the electric field is close to the critical field for runaway acceleration. Using a runaway electron distribution appropriate for the near-critical case, we calculate the linear instability growth rate of these waves and conclude that the obliquely propagating whistler waves are most unstable. We show that the frequencies, wave numbers, and propagation angles of the most unstable waves depend strongly on the magnetic field. Taking into account collisional and convective damping of the waves, we determine the number density of runaways that is required to destabilize the waves and show its parametric dependences.

Modulation of Apoptosis Controls Inhibitory Interneuron Number in the Cortex

Directory of Open Access Journals (Sweden)

Myrto Denaxa

2018-02-01

Full Text Available Cortical networks are composed of excitatory projection neurons and inhibitory interneurons. Finding the right balance between the two is important for controlling overall cortical excitation and network dynamics. However, it is unclear how the correct number of cortical interneurons (CIs is established in the mammalian forebrain. CIs are generated in excess from basal forebrain progenitors, and their final numbers are adjusted via an intrinsically determined program of apoptosis that takes place during an early postnatal window. Here, we provide evidence that the extent of CI apoptosis during this critical period is plastic and cell-type specific and can be reduced in a cell-autonomous manner by acute increases in neuronal activity. We propose that the physiological state of the emerging neural network controls the activity levels of local CIs to modulate their numbers in a homeostatic manner.

Outcome measures for adult critical care: a systematic review.

Science.gov (United States)

Hayes, J A; Black, N A; Jenkinson, C; Young, J D; Rowan, K M; Daly, K; Ridley, S

2000-01-01

1. To identify generic and disease specific measures of impairment, functional status and health-related quality of life that have been used in adult critical care (intensive and high-dependency care) survivors. 2. To review the validity, reliability and responsiveness of the measures in adult critical care survivors. 3. To consider the implications for future policy and to make recommendations for further methodological research. 4. To review what is currently known of the outcome of adult critical care. Searches of electronic databases (MEDLINE, EMBASE, CINAHL, PsycLIT, The Cochrane Library and SIGLE) from 1970 to August 1998. Manual searches of five journals (1985-98) not indexed in electronic databases and relevant conference proceedings (1993-98). Reference lists of six existing reviews, plus snowballing from reference lists of all relevant articles identified. Randomised trials, non-randomised trials (cohort studies) and case series that included data on outcomes after discharge from adult (16 years and over) critical care. If reported, the following data were extracted from each paper: patient characteristics (age, gender, severity of illness, diagnostic category) number of patients eligible for study, follow-up period, number of deaths before follow-up, number and proportion of survivors included in follow-up method of presentation of outcome data - proportion normal as defined by reference values, or aggregate value (e.g. mean or median), or aggregate values plus an indication of variance (e.g. standard deviation or inter-quartile range). Evidence for three measurement properties was sought for each outcome measure that had been used in at least two studies - their validity, reliability and responsiveness in adult critical care. If the authors did not report these aspects explicitly, an attempt was made to use the data provided to provide these measurement properties. For measures that were used in at least ten studies, information on actual reported

High level issues in reliability quantification of safety-critical software

International Nuclear Information System (INIS)

Kim, Man Cheol

2012-01-01

For the purpose of developing a consensus method for the reliability assessment of safety-critical digital instrumentation and control systems in nuclear power plants, several high level issues in reliability assessment of the safety-critical software based on Bayesian belief network modeling and statistical testing are discussed. Related to the Bayesian belief network modeling, the relation between the assessment approach and the sources of evidence, the relation between qualitative evidence and quantitative evidence, how to consider qualitative evidence, and the cause-consequence relation are discussed. Related to the statistical testing, the need of the consideration of context-specific software failure probabilities and the inability to perform a huge number of tests in the real world are discussed. The discussions in this paper are expected to provide a common basis for future discussions on the reliability assessment of safety-critical software. (author)

Quantum critical scaling of fidelity in BCS-like model

International Nuclear Information System (INIS)

Adamski, Mariusz; Jedrzejewski, Janusz; Krokhmalskii, Taras

2013-01-01

We study scaling of the ground-state fidelity in neighborhoods of quantum critical points in a model of interacting spinful fermions—a BCS-like model. Due to the exact diagonalizability of the model, in one and higher dimensions, scaling of the ground-state fidelity can be analyzed numerically with great accuracy, not only for small systems but also for macroscopic ones, together with the crossover region between them. Additionally, in the one-dimensional case we have been able to derive a number of analytical formulas for fidelity and show that they accurately fit our numerical results; these results are reported in the paper. Besides regular critical points and their neighborhoods, where well-known scaling laws are obeyed, there is the multicritical point and critical points in its proximity where anomalous scaling behavior is found. We also consider scaling of fidelity in neighborhoods of critical points where fidelity oscillates strongly as the system size or the chemical potential is varied. Our results for a one-dimensional version of a BCS-like model are compared with those obtained recently by Rams and Damski in similar studies of a quantum spin chain—an anisotropic XY model in a transverse magnetic field. (paper)

Critical infrastructure protection

Energy Technology Data Exchange (ETDEWEB)

Bradley, F. [Canadian Electricity Association, Toronto, ON (Canada)

2003-04-01

The need to protect critical electrical infrastructure from terrorist attacks, or other physical damage, including weather related events, or the potential impact of computer viruses and other attacks on IT resources are discussed. Activities of the North American Electric Reliability Council (NERC) are highlighted which seek to safeguard the North American bulk electric power system principally through the Information Sharing and Analysis Sector (ES-ISAC). ES-ISAC serves the electricity sector by facilitating communication between electric sector participants, federal government and other critical infrastructure industries by disseminating threat indications, analyses and warnings, together with interpretations, to assist the industry in taking infrastructure protection actions. Attention is drawn to the numerous cyber incidents in recent years, which although resulted in no loss of service to electricity customers so far, in at least one instance (the January 25th SOL-Slammer worm incident) resulted in degradation of service in a number of sectors, including financial, transportation and telecommunication services. The increasing frequency of cyber-based attacks, coupled with the industry's growing dependence on e-commerce and electronic controls, are good reasons to believe that critical infrastructure protection (CIP) poses a serious challenge to the industry's risk management practices. The Canadian Electricity Association (CEA) is an active participant in ES-ISAC and works cooperatively with a range of partners, such as the Edison Electric Institute and the American Public Power Association to ensure coordination and effective protection program delivery for the electric power sector. The Early Warning System (EWS) developed by the CIP Working Group is one of the results of this cooperation. EWS uses the Internet, e-mail, web-enabled cell phones and Blackberry hand-held devices to deliver real-time threat information to members on a 24/7 basis. EWS

Critical Review

DEFF Research Database (Denmark)

Rosenbaum, Ralph K.; Olsen, Stig Irving

2018-01-01

Manipulation and mistakes in LCA studies are as old as the tool itself, and so is its critical review. Besides preventing misuse and unsupported claims, critical review may also help identifying mistakes and more justifiable assumptions as well as generally improve the quality of a study. It thus...... supports the robustness of an LCA and increases trust in its results and conclusions. The focus of this chapter is on understanding what a critical review is, how the international standards define it, what its main elements are, and what reviewer qualifications are required. It is not the objective...... of this chapter to learn how to conduct a critical review, neither from a reviewer nor from a practitioner perspective. The foundation of this chapter and the basis for any critical review of LCA studies are the International Standards ISO 14040:2006, ISO 14044:2006 and ISO TS 14071:2014....

Computer–Aided Design of the Critical Speed of Shafts | Akpobi ...

African Journals Online (AJOL)

A computer aided design software for the analysis of the critical speed of shaft, is developed and presented in this work. The software was designed using the principles of object oriented programming, and implemented with the Microsoft Visual Basic Language. The package was tested on a number of benchmark design ...

Mathematical Critical Thinking and Curiosity Attitude in Problem Based Learning and Cognitive Conflict Strategy: A Study in Number Theory Course

Science.gov (United States)

Zetriuslita; Wahyudin; Jarnawi

2017-01-01

This research aims to describe and analyze result of applying Problem-Based Learning and Cognitive Conflict Strategy (PBLCCS) in increasing students' Mathematical Critical Thinking (MCT) ability and Mathematical Curiosity Attitude (MCA). Adopting a quasi-experimental method with pretest-posttest control group design and using mixed method with…

Design and construction of a fast critical facility

International Nuclear Information System (INIS)

Kato, W.Y.; Dates, L.R.

1962-01-01

Design and construction of a fast critical facility. In a fast-power-reactor development programme, a critical facility is found to be a highly useful tool to ascertain calculational techniques, to verify neutron cross-section sets, and to obtain integral reactor-physics parameters necessary for the nuclear design of a power system. Since it is primarily a physics instrument, the design of a fast critical facility itself poses a number of different problems not found in the design of a power reactor. In addition to usual questions of site, containment, core design and instrumentation , there arise such problems as: how to obtain a large degree of flexibility consistent with safety, the determination of the size and type of facility to meet the experimental physics requirements, the determination of the number and location of control and safety rods minimizing perturbation effects and the specification of the reproducibility of control rods and other movable components to obtain the accuracy required in reactivity measurements. These are some of the problems which are discussed in this paper based on recent experience at the Argonne National Laboratory which has under construction a fast critical facility, ZPR-VI at its Lemont, Illinois site for fast-reactor-physics studies. The ZPR-VI is a movable half- or split-table-type machine similar to ZPR-III. It has a matrix about two and a half times the volume of the earlier machine and will be used to investigate the physics of large, highly dilute, metal and cermet, unmoderated and partially moderated systems having core volumes up to about 1500 l. A detailed description of the ZPR-VI with a discussion on the criteria used in the design of its various components from the point of view of reactor physics is presented. In addition, such topics as management and operating procedures, potential hazards during operation, experimental techniques to be used and construction costs are also included. (author) [fr

Investigation of heat transfer and fluid flow in activating TIG welding by numerical modeling

International Nuclear Information System (INIS)

Wang, Xinxin; Huang, Jiankang; Huang, Yong; Fan, Ding; Guo, Yanning

2017-01-01

Highlights: • The heat input to the anode and subsequent thermal efficiency is almost equal for TIG and A-TIG welding. • Dominant effect heat convection and reversion of molten metal flow in weld pool causes significant increase in weld penetration. - Abstract: Heat transfer and fluid flow of arc plasma and weld pool in tungsten inert gas (TIG) welding and activated flux tungsten inert gas (A-TIG) welding of SUS 304 stainless steel are investigated comparatively though a 3D unified model. The model differs from the previous ones in that it considers the arc length more realistic for welding production. Tungsten electrode, anode (work piece) and arc plasma are all included. The effects of buoyance, plasma drag force, Lorentz force and Marangoni force on the weld pool flow are taken into account. By solving the conservation equations of mass, momentum, energy as well as Maxwell equations, the distributions of temperature and velocity of arc plasma and weld pool are obtained for TIG and A-TIG welding. The heat flux, current density and shear stress at the weld pool are presented. Dimensionless numbers are employed to compare the relative importance of the driven forces and that of convection and conduction in heat transfer of the weld pool. It is demonstrated that there is no significant difference in the heat flux at the weld pool, and total heat input to the anode and thermal efficiency is almost equal for TIG and A-TIG welding. The current density and the heat flux at the weld pool are more concentrated in more realistic welding condition. As a result, both of the temperature of the weld pool for TIG welding and A-TIG welding increases, while the latter is more significant. Marangoni force ranges from zero to 100 Pa and dominant the weld pool flow. Compared with the conventional TIG welding, the reversion of the Marangoni force results in inward flow and thus causes inward heat convection in weld pool of A-TIG welding. Heat convection was the main mechanism of

Critical Care Organizations: Business of Critical Care and Value/Performance Building.

Science.gov (United States)

Leung, Sharon; Gregg, Sara R; Coopersmith, Craig M; Layon, A Joseph; Oropello, John; Brown, Daniel R; Pastores, Stephen M; Kvetan, Vladimir

2018-01-01

New, value-based regulations and reimbursement structures are creating historic care management challenges, thinning the margins and threatening the viability of hospitals and health systems. The Society of Critical Care Medicine convened a taskforce of Academic Leaders in Critical Care Medicine on February 22, 2016, during the 45th Critical Care Congress to develop a toolkit drawing on the experience of successful leaders of critical care organizations in North America for advancing critical care organizations (Appendix 1). The goal of this article was to provide a roadmap and call attention to key factors that adult critical care medicine leadership in both academic and nonacademic setting should consider when planning for value-based care. Relevant medical literature was accessed through a literature search. Material published by federal health agencies and other specialty organizations was also reviewed. Collaboratively and iteratively, taskforce members corresponded by electronic mail and held monthly conference calls to finalize this report. The business and value/performance critical care organization building section comprised of leaders of critical care organizations with expertise in critical care administration, healthcare management, and clinical practice. Two phases of critical care organizations care integration are described: "horizontal," within the system and regionalization of care as an initial phase, and "vertical," with a post-ICU and postacute care continuum as a succeeding phase. The tools required for the clinical and financial transformation are provided, including the essential prerequisites of forming a critical care organization; the manner in which a critical care organization can help manage transformational domains is considered. Lastly, how to achieve organizational health system support for critical care organization implementation is discussed. A critical care organization that incorporates functional clinical horizontal and

Experimental comparison of the critical ionization velocity in atomic and molecular gases

International Nuclear Information System (INIS)

Axnaes, I.

1978-08-01

The critical ionization velocity usub(c) of Ne, Kr, Xe, Cl 2 , O 2 , CO, CO 2 , NH 3 and H 2 O is investigated experimentally in a coaxial plasma gun. Together with experimental data obtained in earlier experiments the present results make it possible to make a systematic comparison between the critical ionization velocity for atomic and molecular gases. It is found that atomic and molecular gases tend to have values of critical ionization velocity which are respectively smaller and larger than the theoretical values. The current dependence of usub(c) is found to be different for atomic and molecular gases. A number of atomic and molecular processes relevant to the experiment are discussed

Toward quantification of the uncertainty in estimating frequency of critical station blackout

International Nuclear Information System (INIS)

Rodgers, Shawn; Betancourt, Coral; Kee, Ernie; Nelson, Paul; Rodi, Paul

2011-01-01

A formal statement of the critical station blackout problem is provided, and a solution given, up to evaluation of an n-dimensional 'non recovery integral' n =number of trains (parallel backup sources of electrical power). Several approaches that have been developed in the industry to estimate probability of critical station blackout are shown to be interpretable as special cases of such integrals. Computational results, for a simple model problem, suggest there is yet a very substantial over conservatism in current state-of-the-art techniques for estimating probability of critical station blackout. Research issues associated to possibly meeting this need via computational evaluation of the non recovery integral are discussed. (author)

Scaling laws of resistive magnetohydrodynamic reconnection in the high-Lundquist-number, plasmoid-unstable regime

International Nuclear Information System (INIS)

Huang Yimin; Bhattacharjee, A.

2010-01-01

The Sweet-Parker layer in a system that exceeds a critical value of the Lundquist number (S) is unstable to the plasmoid instability. In this paper, a numerical scaling study has been done with an island coalescing system driven by a low level of random noise. In the early stage, a primary Sweet-Parker layer forms between the two coalescing islands. The primary Sweet-Parker layer breaks into multiple plasmoids and even thinner current sheets through multiple levels of cascading if the Lundquist number is greater than a critical value S c ≅4x10 4 . As a result of the plasmoid instability, the system realizes a fast nonlinear reconnection rate that is nearly independent of S, and is only weakly dependent on the level of noise. The number of plasmoids in the linear regime is found to scales as S 3/8 , as predicted by an earlier asymptotic analysis [N. F. Loureiro et al., Phys. Plasmas 14, 100703 (2007)]. In the nonlinear regime, the number of plasmoids follows a steeper scaling, and is proportional to S. The thickness and length of current sheets are found to scale as S -1 , and the local current densities of current sheets scale as S -1 . Heuristic arguments are given in support of theses scaling relations.

Critical power experiment with a tight-lattice 37-rod bundle

International Nuclear Information System (INIS)

Kureta, Masatoshi; Tamai, Hidesada; Ohnuki, Akira; Sato, Takashi; Liu, Wei; Akimoto, Hajime

2006-01-01

Since most of critical power or CHF data have been collected in tube, annulus, or BWR geometries under BWR flow conditions, critical power data for highly tight and triangular lattice bundles under low mass velocity are indispensable for thermal-hydraulic design of Reduced-Moderation Water Reactor. Large-scale thermal-hydraulic experiments which use a basic 37-rod bundle test section (rod diameter: 13.0 mm, gap width between rods: 1.3 mm) were therefore carried out in this study within range of 2-9 MPa in pressure and 150-1,000 kg/(m 2 ·s) in mass velocity. Fundamental characteristics of boiling transition were investigated through effects of flow parameter on critical power and those of rod number. It was confirmed that the fundamental characteristics in 37-rod bundle are similar to those in 7-rod bundle and in case of the BWR geometry. The results of the transverse non-uniform power distribution test and subchannel analysis suggest that the critical power becomes higher when the transverse local quality distribution closes to uniform. (author)

Critical thinking and the role of the clinical ultrasound tutor

International Nuclear Information System (INIS)

Edwards, Hazel

2006-01-01

As radiographers continue to extend their role and take on more procedures associated traditionally with radiologists, it is essential that their critical thinking abilities keep pace with the new practical skills they are learning. This is particularly important in ultrasound where student sonographers must master a number of new skills including the technical dexterity required to perform a scan, the ability to form and discard hypotheses when trying to interpret the image, and the communication of their findings as a written report. Interpreting the image and producing an accurate, appropriate report involves the higher level cognitive processes of analysis, synthesis and evaluation. In other words, the student sonographer must be able to think critically to become a successful practitioner. This paper attempts to define and discuss critical thinking, and considers a range of simple strategies that the clinical teacher of ultrasound can employ to help develop critical thinking skills in their students. These methods are appropriate for use not only by clinical teachers of ultrasound but for all teachers and mentors wishing to improve reasoning skills in their pupils

Criticality alarm device

International Nuclear Information System (INIS)

Kasai, Kenji.

1994-01-01

The device of the present invention is utilized, for example, to a reprocessing facility for storing and processing nuclear fuels and measures and controls the nuclear fuel assembly system so as not to exceed criticality. That is, a conventional criticality alarm device applies a predetermined processing to neutron fluxes generated from a nuclear fuel assembly system containing nuclear fuels and outputs an alarm. The device of the present invention comprises (1) a neutron flux supply source for increasing and decreasing neutron fluxes periodically and supplying them to nuclear fuel assemblies, (2) a detector for detecting neutron fluxes in the nuclear fuel assemblies, (3) a critical state judging section for judging the critical state of the nuclear fuel assemblies based on the periodically changing signals obtained from the detector (2) and (4) an alarm section for outputting criticality alarms depending on the result of the judgement. The device of the present invention can accurately recognize the critical state of the nuclear fuel assembly system and can forecast reaching of the nuclear fuel assembly to criticality or prompt neutron critical state. (I.S.)

Critical cooperation range to improve spatial network robustness.

Directory of Open Access Journals (Sweden)

Vitor H P Louzada

Full Text Available A robust worldwide air-transportation network (WAN is one that minimizes the number of stranded passengers under a sequence of airport closures. Building on top of this realistic example, here we address how spatial network robustness can profit from cooperation between local actors. We swap a series of links within a certain distance, a cooperation range, while following typical constraints of spatially embedded networks. We find that the network robustness is only improved above a critical cooperation range. Such improvement can be described in the framework of a continuum transition, where the critical exponents depend on the spatial correlation of connected nodes. For the WAN we show that, except for Australia, all continental networks fall into the same universality class. Practical implications of this result are also discussed.

Validation of KENO V.a: Comparison with critical experiments

International Nuclear Information System (INIS)

Jordan, W.C.; Landers, N.F.; Petrie, L.M.

1986-12-01

Section 1 of this report documents the validation of KENO V.a against 258 critical experiments. Experiments considered were primarily high or low enriched uranium systems. The results indicate that the KENO V.a Monte Carlo Criticality Program accurately calculates a broad range of critical experiments. A substantial number of the calculations showed a positive or negative bias in excess of 1 1/2% in k-effective (k/sub eff/). Classes of criticals which show a bias include 3% enriched green blocks, highly enriched uranyl fluoride slab arrays, and highly enriched uranyl nitrate arrays. If these biases are properly taken into account, the KENO V.a code can be used with confidence for the design and criticality safety analysis of uranium-containing systems. Sections 2 of this report documents the results of investigation into the cause of the bias observed in Sect. 1. The results of this study indicate that the bias seen in Sect. 1 is caused by code bias, cross-section bias, reporting bias, and modeling bias. There is evidence that many of the experiments used in this validation and in previous validations are not adequately documented. The uncertainty in the experimental parameters overshadows bias caused by the code and cross sections and prohibits code validation to better than about 1% in k/sub eff/. 48 refs., 19 figs., 19 tabs

Kirik või muuseum? / Rael Artel

Index Scriptorium Estoniae

Artel, Rael, 1980-

2004-01-01

Vatikani kultuuriministeeriumi juhi ametikohale asunud piiskop Mauro Piacenza mõistis hukka kirikutesse sissepääsu maksustamise. Veneetsia kirikutes piletimüüki korraldava Progetto Choruse presidendi Aldo Marangoni vastus piiskopi avaldusele, piletitulu kasutamisest

Critical de Broglie wavelength in superconductors

Science.gov (United States)

Talantsev, E. F.

2018-03-01

There are growing numbers of experimental evidences that the self-field critical currents, Jc(sf,T), are a new instructive tool to investigate fundamental properties of superconductors ranging from atomically thin films [M. Liao et al., Nat. Phys. 6 (2018), https://doi.org/10.1038/s41567-017-0031-6; E. F. Talantsev et al., 2D Mater. 4 (2017) 025072; A. Fete et al., Appl. Phys. Lett. 109 (2016) 192601] to millimeter-scale samples [E. F. Talantsev et al., Sci. Rep. 7 (2017) 10010]. The basic empirical equation which quantitatively accurately described experimental Jc(sf,T) was proposed by Talantsev and Tallon [Nat. Commun. 6 (2015) 7820] and it was the relevant critical field (i.e. thermodynamic field, Bc, for type-I and lower critical field, Bc1, for type-II superconductors) divided by the London penetration depth, λL. In this paper, we report new findings relating to this empirical equation. It is that the critical wavelength of the de Broglie wave, λdB,c, of the superconducting charge carrier which within a numerical pre-factor is equal to the largest of two characteristic lengths of Ginzburg-Landau theory, i.e. the coherence length, ξ, for type-I superconductors or the London penetration depth, λL, for type-II superconductors. We also formulate a microscopic criterion for the onset of dissipative transport current flow: ps ṡ 2ṡλL ln(1+2ṡ(λL ξ )) ≥ 1 2 ṡ ( h 2π), where ps is the charge carrier momentum, h is Planck’s constant and the inequality sign “ <” is reserved for the dissipation-free flow.

Burst wait time simulation of CALIBAN reactor at delayed super-critical state

International Nuclear Information System (INIS)

Humbert, P.; Authier, N.; Richard, B.; Grivot, P.; Casoli, P.

2012-01-01

In the past, the super prompt critical wait time probability distribution was measured on CALIBAN fast burst reactor [4]. Afterwards, these experiments were simulated with a very good agreement by solving the non-extinction probability equation [5]. Recently, the burst wait time probability distribution has been measured at CEA-Valduc on CALIBAN at different delayed super-critical states [6]. However, in the delayed super-critical case the non-extinction probability does not give access to the wait time distribution. In this case it is necessary to compute the time dependent evolution of the full neutron count number probability distribution. In this paper we present the point model deterministic method used to calculate the probability distribution of the wait time before a prescribed count level taking into account prompt neutrons and delayed neutron precursors. This method is based on the solution of the time dependent adjoint Kolmogorov master equations for the number of detections using the generating function methodology [8,9,10] and inverse discrete Fourier transforms. The obtained results are then compared to the measurements and Monte-Carlo calculations based on the algorithm presented in [7]. (authors)

Burst wait time simulation of CALIBAN reactor at delayed super-critical state

Energy Technology Data Exchange (ETDEWEB)

Humbert, P. [Commissariat a l' Energie Atomique CEA, Centre de Bruyeres-le-Chatel, 91297 Arpajon (France); Authier, N.; Richard, B.; Grivot, P.; Casoli, P. [Commissariat a l' Energie Atomique CEA, Centre de Valduc, 21120 Is-sur-Tille (France)

2012-07-01

In the past, the super prompt critical wait time probability distribution was measured on CALIBAN fast burst reactor [4]. Afterwards, these experiments were simulated with a very good agreement by solving the non-extinction probability equation [5]. Recently, the burst wait time probability distribution has been measured at CEA-Valduc on CALIBAN at different delayed super-critical states [6]. However, in the delayed super-critical case the non-extinction probability does not give access to the wait time distribution. In this case it is necessary to compute the time dependent evolution of the full neutron count number probability distribution. In this paper we present the point model deterministic method used to calculate the probability distribution of the wait time before a prescribed count level taking into account prompt neutrons and delayed neutron precursors. This method is based on the solution of the time dependent adjoint Kolmogorov master equations for the number of detections using the generating function methodology [8,9,10] and inverse discrete Fourier transforms. The obtained results are then compared to the measurements and Monte-Carlo calculations based on the algorithm presented in [7]. (authors)

Formation and magic number characteristics of clusters formed during solidification processes

International Nuclear Information System (INIS)

Liu Rangsu; Dong Kejun; Tian Zean; Liu Hairong; Peng Ping; Yu Aibing

2007-01-01

A molecular dynamics simulation study has been performed for a large-sized system consisting of 10 6 liquid metal Al atoms to investigate the formation and magic number characteristics of various clusters formed during solidification processes. The cluster-type index method (CTIM) is adopted to describe various types of cluster by basic clusters. It is demonstrated that the icosahedral cluster (12 0 12 0) is the most important basic cluster, and that it plays a critical role in the microstructure transition. A new statistical method has been proposed to classify the clusters as some group levels according to the numbers of basic clusters contained in each cluster. The magic numbers can be determined by the respective peak value positions of different group levels of clusters, and the magic number sequence in the system is 13, 19, 25(27), 31(33), 38(40), 42(45), 48(51), 55(59), 61(65), 67,... the numbers in the brackets are the second magic number of the corresponding group levels of clusters. This magic number sequence is in good agreement with the experimental results obtained by Schriver and Harris et al, and the experimental results can be reasonably well explained

From coffee ring to spherulites ring of poly(ethylene oxide) film from drying droplet

Science.gov (United States)

Hu, Yinchun; Zhang, Xuerong; Qiu, Maibo; Wei, Yan; Zhou, Qiong; Huang, Di

2018-03-01

We discuss how the "spherulites ring" morphology and "coffee ring" profile of PEO film formed by the drying droplet at glass substrate with different heating rate. Upon increasing the heating rate of substrate, it is found that deposited PEO film from drying droplet shows the unusually observed "coffee ring" profile and "spherulites ring" morphology. The main mechanism for this phenomenon is proposed to be an enhanced Marangoni convection which is induced by the increased solute concentration gradient and reduced viscous force above 70 °C. A simple formation mechanism of the unusually observed "coffee ring" profile and "spherulites ring" morphology is proposed. These findings can be exploited to trace the center of Marangoni convection, with potential applications in designing the spherulite patterns of crystalline polymer films in ink-jet printing and self-assembly fields.

From Critical Theory to Critical Hermeneutics

Directory of Open Access Journals (Sweden)

Øjvind Larsen

2014-06-01

Full Text Available From their beginning in the 1930s, critical theory and the Frankfurt school had their focus on a critique of disturbed social relations in western society dominated by totalitarian political regimes like Stalinism, Fascism, Nazism, and by capitalism as an oppressive and destructive economic system and culture. Now, 80 years later, this has all become history and thus it is time to leave the concept of critical theory behind us, and instead bring the concept of critique to a broader theoretical framework like hermeneutics. This allows the possibility of retaining the theoretical intentions of the old Frankfurt school and at the same time there will be no boundaries by specific dominant theoretical perspectives. In this paper, such a framework for a critical hermeneutics is discussed on the basis of Weber’s, Gadamer’s, and Habermas’ theories on hermeneutics within the social sciences.

Liquid-Vapor Argon Isotope Fractionation from the Triple Point to the Critical Point

DEFF Research Database (Denmark)

Phillips, J. T.; Linderstrøm-Lang, C. U.; Bigeleisen, J.

1972-01-01

are compared at the same molar volume. The isotope fractionation factor α for 36Ar∕40Ar between liquid and vapor has been measured from the triple point to the critical temperature. The results are compared with previous vapor pressure data, which cover the range 84–102°K. Although the agreement is within....... The fractionation factor approaches zero at the critical temperature with a nonclassical critical index equal to 0.42±0.02.〈∇2Uc〉/ρc in liquid argon is derived from the experimental fractionation data and calculations of 〈∇2Ug〉/ρg for a number of potential functions for gaseous argon....

Critical Thinking in Criminology: Critical Reflections on Learning and Teaching

Science.gov (United States)

Howes, Loene M.

2017-01-01

Fostering critical thinking abilities amongst students is one component of preparing them to navigate uncertain and complex social lives and employment circumstances. One conceptualisation of critical thinking, valuable in higher education, draws from critical theory to promote social justice and redress power inequities. This study explored how…

An approach to solve group-decision-making problems with ordinal interval numbers.

Science.gov (United States)

Fan, Zhi-Ping; Liu, Yang

2010-10-01

The ordinal interval number is a form of uncertain preference information in group decision making (GDM), while it is seldom discussed in the existing research. This paper investigates how the ranking order of alternatives is determined based on preference information of ordinal interval numbers in GDM problems. When ranking a large quantity of ordinal interval numbers, the efficiency and accuracy of the ranking process are critical. A new approach is proposed to rank alternatives using ordinal interval numbers when every ranking ordinal in an ordinal interval number is thought to be uniformly and independently distributed in its interval. First, we give the definition of possibility degree on comparing two ordinal interval numbers and the related theory analysis. Then, to rank alternatives, by comparing multiple ordinal interval numbers, a collective expectation possibility degree matrix on pairwise comparisons of alternatives is built, and an optimization model based on this matrix is constructed. Furthermore, an algorithm is also presented to rank alternatives by solving the model. Finally, two examples are used to illustrate the use of the proposed approach.

Application of ANNS in tube CHF prediction: effect on neuron number in hidden layer

International Nuclear Information System (INIS)

Han, L.; Shan, J.; Zhang, B.

2004-01-01

Prediction of the Critical Heat Flux (CHF) for upward flow of water in uniformly heated vertical round tube is studied with Artificial Neuron Networks (ANNs) method utilizing different neuron number in hidden layers. This study is based on thermal equilibrium conditions. The neuron number in hidden layers is chosen to vary from 5 to 30 with the step of 5. The effect due to the variety of the neuron number in hidden layers is analyzed. The analysis shows that the neuron number in hidden layers should be appropriate, too less will affect the prediction accuracy and too much may result in abnormal parametric trends. It is concluded that the appropriate neuron number in two hidden layers should be [15 15]. (authors)

Parachors in terms of critical temperature, critical pressure and acentric factor

Energy Technology Data Exchange (ETDEWEB)

Broseta, D.; Ragil, K.

1995-12-31

The method of parachors is widely used in conventional thermodynamic codes and reservoir simulators to calculate oil/gas interfacial tensions of complex hydrocarbon mixtures. In the low-to-moderate interfacial tension regime, a value p{approx}11/3 has previously been shown to be the {open_quotes}best{close_quotes} parachor exponent. This exponent is a critical exponent and its value is consistent with the values of critical exponents characterizing the liquid/vapor critical behavior. Therefore parachors may be viewed as critical amplitudes. By using critical scaling theory, parachors are related to other critical amplitudes and critical parameters that describe the bulk thermodynamic behavior of fluids. A simple expression relating the parachor of a pure compound to its critical temperature T{sub c}, critical pressure P{sub c}, and acentric factor {omega} is proposed: P= (0.85-0.19{omega})T{sub c}{sup 12/11}/P{sub c}{sup 9/11} where the parachor P is in units of (dyn/cm){sup 3/11}cm{sup 3}/mol, T{sub c} in K and P{sub c} in MPa. This equation matches (within experimental error) the known parachor values of normal fluids (e.g. alkanes, aromatics, CO{sub 2}, N{sub 2}, H{sub 2}S, etc...).

Critical pressure of non-equilibrium two-phase critical flow

Energy Technology Data Exchange (ETDEWEB)

Minzer, U [Israel Electric Corp. Ltd., Haifa (Israel)

1996-12-01

Critical pressure is defined as the pressure existing at the exit edge of the piping, when it remains constant despite a decrease in the back. According to this definition the critical pressure is larger than the back pressure and for two-phase conditions below saturation pressure. The two-phase critical pressure has a major influence on the two-phase critical flow characteristics. Therefore it is of High significance in calculations of critical mass flux and critical depressurization rate, which are important in the fields of Nuclear Reactor Safety and Industrial Safety. At the Nuclear Reactor Safety field is useful for estimations of the Reactor Cooling System depressurization, the core coolant level, and the pressure build-up in the containment. In the Industrial Safety field it is helpful for estimating the leakage rate of toxic gases Tom liquefied gas pressure vessels, depressurization of pressure vessels, and explosion conditions due to liquefied gas release. For physical description of non-equilibrium two-phase critical flow it would be convenient to divide the flow into two stages. The first stage is the flow of subcooled liquid at constant temperature and uniform pressure drop (i.e., the case of incompressible fluid and uniform piping cross section). The rapid flow of the liquid causes a delay in the boiling of the liquid, which begins to boil below saturation pressure, at thermal non-equilibrium. The boiling is the beginning of the second stage, characterized by a sharp increase of the pressure drop. The liquid temperature on the second stage is almost constant because most of the energy for vaporization is supplied from the large pressure drop The present work will focus on the two-phase critical pressure of water, since water serves as coolant in the vast majority of nuclear power reactors throughout the world. (author).

Critical pressure of non-equilibrium two-phase critical flow

International Nuclear Information System (INIS)

Minzer, U.

1996-01-01

Critical pressure is defined as the pressure existing at the exit edge of the piping, when it remains constant despite a decrease in the back. According to this definition the critical pressure is larger than the back pressure and for two-phase conditions below saturation pressure. The two-phase critical pressure has a major influence on the two-phase critical flow characteristics. Therefore it is of High significance in calculations of critical mass flux and critical depressurization rate, which are important in the fields of Nuclear Reactor Safety and Industrial Safety. At the Nuclear Reactor Safety field is useful for estimations of the Reactor Cooling System depressurization, the core coolant level, and the pressure build-up in the containment. In the Industrial Safety field it is helpful for estimating the leakage rate of toxic gases Tom liquefied gas pressure vessels, depressurization of pressure vessels, and explosion conditions due to liquefied gas release. For physical description of non-equilibrium two-phase critical flow it would be convenient to divide the flow into two stages. The first stage is the flow of subcooled liquid at constant temperature and uniform pressure drop (i.e., the case of incompressible fluid and uniform piping cross section). The rapid flow of the liquid causes a delay in the boiling of the liquid, which begins to boil below saturation pressure, at thermal non-equilibrium. The boiling is the beginning of the second stage, characterized by a sharp increase of the pressure drop. The liquid temperature on the second stage is almost constant because most of the energy for vaporization is supplied from the large pressure drop The present work will focus on the two-phase critical pressure of water, since water serves as coolant in the vast majority of nuclear power reactors throughout the world. (author)

Nuclear criticality predictability

International Nuclear Information System (INIS)

Briggs, J.B.

1999-01-01

As a result of lots of efforts, a large portion of the tedious and redundant research and processing of critical experiment data has been eliminated. The necessary step in criticality safety analyses of validating computer codes with benchmark critical data is greatly streamlined, and valuable criticality safety experimental data is preserved. Criticality safety personnel in 31 different countries are now using the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments'. Much has been accomplished by the work of the ICSBEP. However, evaluation and documentation represents only one element of a successful Nuclear Criticality Safety Predictability Program and this element only exists as a separate entity, because this work was not completed in conjunction with the experimentation process. I believe; however, that the work of the ICSBEP has also served to unify the other elements of nuclear criticality predictability. All elements are interrelated, but for a time it seemed that communications between these elements was not adequate. The ICSBEP has highlighted gaps in data, has retrieved lost data, has helped to identify errors in cross section processing codes, and has helped bring the international criticality safety community together in a common cause as true friends and colleagues. It has been a privilege to associate with those who work so diligently to make the project a success. (J.P.N.)

Coupled thermo-capillary and buoyancy convection in a liquid layer locally heated on its free surface

International Nuclear Information System (INIS)

Favre, E.

1997-01-01

Coupled buoyancy and thermo-capillary convection lead to a convective motion of the interface liquid/gas, which changes drastically the heat and mass transfer across the liquid layer. Two experiments are considered, depending on the fluid: oil or mercury. The liquid is set in a cooled cylindrical vessel, and heated by a heat flux across the center of the free surface. The basic flow, in the case of oil, is a torus. When the heat parameter increases, a stationary flow looking like petals or rays appears when the aspect ratio length/depth is small, and like concentric rings in the case of large values of the aspect ratio. The lateral confinement selects the azimuthal length wave. In the case of petals-like flow, a sub-critical Hopf bifurcation is underlined. The turbulence is found to be 'weak', even for the largest values of the Marangoni number (Ma ≅ 1.3 * 10 5 ). In the case of mercury, the thermo-capillary effect is reduced to zero, due to impurities at the surface, which have special trajectories we describe and compare to a simpler experiment. The only buoyancy forces induces an un-stationary, weakly turbulent flow as soon as the heating power exceeds 4 W (≅ 4.5 * 10 3 , calculated with h = 1 mm). The last part concerns the analysis of the effect on the flow of the boundary conditions, the geometry, the Prandtl number, the buoyancy force, with the help of the literature. Results concerning heat transfer, especially the exponent of the law Nusselt number vs. heating power, are compared with available data. (author) [fr

Resonance – Journal of Science Education | Indian Academy of ...

Indian Academy of Sciences (India)

Abstract. In this series of articles, the authors discuss various phenomenain fluid dynamics, which may be investigated via tabletopexperiments using low-cost or home-made instruments. Theeleventh article in this series demonstrates the Marangoni effect.

Critical Thinking and Disposition Toward Critical Thinking Among Physical Therapy Students.

Science.gov (United States)

Domenech, Manuel A; Watkins, Phillip

2015-01-01

Students who enter a physical therapist (PT) entry-level program with weak critical thinking skills may not be prepared to benefit from the educational training program or successfully engage in the future as a competent healthcare provider. Therefore, assessing PT students' entry-level critical thinking skills and/or disposition toward critical thinking may be beneficial to identifying students with poor, fair, or good critical thinking ability as one of the criteria used in the admissions process into a professional program. First-year students (n=71) from the Doctor of Physical Therapy (DPT) program at Texas Tech University Health Sciences Center completed the California Critical Thinking Skills Test (CCTST), the California Critical Thinking Dispositions Inventory (CCTDI), and demographic survey during orientation to the DPT program. Three students were lost from the CCTST (n=68), and none lost from the CCTDI (n=71). Analysis indicated that the majority of students had a positive disposition toward critical thinking, yet the overall CCTST suggested that these students were somewhat below the national average. Also, individuals taking math and science prerequisites at the community-college level tended to have lower overall CCTST scores. The entering DPT class demonstrated moderate or middle range scores in critical thinking and disposition toward critical thinking. This result does not indicate, but might suggest, the potential for learning challenges. Assessing critical thinking skills as part of the admissions process may prove advantageous.

Critical Proximity

Directory of Open Access Journals (Sweden)

Jane Simon

2010-09-01

Full Text Available This essay considers how written language frames visual objects. Drawing on Michel Foucault’s response to Raymond Roussel’s obsessive description, the essay proposes a model of criticism where description might press up against its objects. This critical closeness is then mapped across the conceptual art practice and art criticism of Ian Burn. Burn attends to the differences between seeing and reading, and considers the conditions which frame how we look at images, including how we look at, and through words. The essay goes on to consider Meaghan Morris’s writing on Lynn Silverman’s photographs. Both Morris and Burn offer an alternative to a parasitic model of criticism and enact a patient way of looking across and through visual landscapes.

Critical proximity

Directory of Open Access Journals (Sweden)

Simon, Jane

2010-01-01

Full Text Available This essay considers how written language frames visual objects. Drawing on Michel Foucault’s response to Raymond Roussel’s obsessive description, the essay proposes a model of criticism where description might press up against its objects. This critical closeness is then mapped across the conceptual art practice and art criticism of Ian Burn. Burn attends to the differences between seeing and reading, and considers the conditions which frame how we look at images, including how we look at, and through words. The essay goes on to consider Meaghan Morris’s writing on Lynn Silverman’s photographs. Both Morris and Burn offer an alternative to a parasitic model of criticism and enact a patient way of looking across and through visual landscapes.

Effects of low heterogeneity in fast critical assemblies

International Nuclear Information System (INIS)

Belov, S.P.; Dulin, V.A.; Zhukov, A.V.; Kuzin, E.N.; Mozhaev, V.K.; Sitnikov, V.I.; Tsibulya, A.M.; Shapar', A.V.; Zayfert, E.; Kuntsman, B.; Khayntsel'man, B.

1989-01-01

The problem of the low heterogeneity of fast critical assemblies, which are used to simulate fast reactors that are under design, has begun to assume increasing importance as the errors in nuclear data and group constants decrease and the capabilities of design codes improve. The design of the fuel channels of the fast critical assemblies of a BFS differs from that of the fuel subassemblies of a power reactor. The principal difference is that critical assemblies have a more heterogeneous structure than a reactor core does. As a result, the effects of this heterogeneity turn out to be appreciable for a number of functionals. Of particular interest was the measurement of the main neutronic characteristics of a fast reactor in its actual design and in the mockup produced by using BFS facilities. The authors measured and calculated the most important functionals (the ratios of the average cross sections of the main absorbing and fissioning elements, etc.) for both a homogeneous medium (fuel assemblies) and a heterogeneous medium (slugs, tubes) of practically identical composition. The objective of this work was to compare the discrepancy between experiment and calculations for the central functionals in the homogeneous and heterogeneous cases after corrections. This is a check of the accuracy of the simulation of homogeneous cores in fast power reactors by using the tools of the BFS fast critical assembly

The critic as transvestite: the parody nature of literary criticism

Directory of Open Access Journals (Sweden)

David Pruneda Sentíes

2016-09-01

Full Text Available This paper explores a path in the analysis of literary criticism as an object of study. In order to convey this, this essay attempts to define literary criticism as a genre that parodies the literary text it aspires to examine. Mikhail Bakhtin’s analysis of the novelistic discourse is useful to establish a connection between parody and criticism. Although Bakhtin discusses the novel, I ascertain that his arguments may be applied to the description of criticism as a parodic-travestying genre. Secondly, this paper discusses Linda Hutcheon’s work, which states that parody is a repetition of the original text. According to Hutcheon, this repetition implies a critical distance with the parodied text, which marks difference rather than similarity.

Analysis of Content of Selected Critical Elements in Fly Ash

Directory of Open Access Journals (Sweden)

Makowska Dorota

2016-03-01

Full Text Available Pursuant to the new mineral policy of the European Union, searching for new sources of raw materials is required. Coal fly ash has long been considered as a potential source of a number of critical elements. Therefore, it is important to monitor the contents of the critical elements in fly ash from coal combustion. The paper presents the results of examinations of the contents of selected elements, i.e. beryllium, cobalt, chromium and germanium in fly ash from Polish power plants. The results of the conducted investigations indicate that the examined ash samples from bituminous coal combustion cannot be treated as a potential source of the analysed critical elements. The content of these elements in ash, though slightly higher than their average content in the sedimentary rocks, is, however, not high enough to make their recovery technologically and economically justified at this moment.

Critical Proximity

OpenAIRE

Simon, Jane

2010-01-01

This essay considers how written language frames visual objects. Drawing on Michel Foucault’s response to Raymond Roussel’s obsessive description, the essay proposes a model of criticism where description might press up against its objects. This critical closeness is then mapped across the conceptual art practice and art criticism of Ian Burn. Burn attends to the differences between seeing and reading, and considers the conditions which frame how we look at images, including how w...

Fully three dimensional simulations of rotating convection at low Prandtl number

Science.gov (United States)

Kaplan, E.; Schaeffer, N.; Cardin, P.

2016-12-01

Rotating thermal convection in spheres or spherical shells has been extensively studied for Prandtl number unity.However, planetary cores are made of liquid metals which have low Prandtl numbers Pr ≤ 0.1. Recently, using a quasi-geostrophic approximation, Guervilly & Cardin (2016) have studied nonlinear convection in rotating full sphere with internal heating at low Prandtl (0.01 ≤ Pr ≤ 0.1) and Ekman (10-8 ≤ Ek ≤ 10-5 ) numbers. They have found a bifurcation between a weak branch characterized by thermal Rossby waves and a strong branch characterized by a strong zonal flow with multiple jets. In these quasi-geostrophic simulations, where vorticity is defined to be constant along the axis of rotation, these bifurcations could be super- or sub-critical or exhibit hysteresis depending on the Ek and Prnumbers of the simulations. Here we present fully three dimensional simulations carried out over a portion of the parameter space (down to Ek = 10-6, Pr = 0.01) that confirm the scaling and bifurcations of the weak and strong branches found in the QG models. Additionally, by modeling the full flow we get information about the full meridional circulation of the convective fluid. The vigorous flows of the sub-critical strong branch may help to generate powerful dynamos before an inner-core has been formed, with a heat flux extracted from the mantle very close to the adiabatic flux.

The appearance of critical dimensions in regulated string theories. Pt. 2

International Nuclear Information System (INIS)

Ambjoern, J.; Durhuus, B.; Froehlich, J.

1986-01-01

We supply numerical evidence for the existence of critical dimensions in a gaussian model of a discretized string, between which the mean number of vertices in the world sheet diverges, and hence a continuum limit may exist. We also discuss the possibility of non-trivial continuum limits. In particular, by introducing an additional parameter into the model, we argue that non-trivial continuum limits can possibly be obtained only between two critical dimensions. Furthermore, we give proofs of some lower bounds on determinants of combinatorial laplacians entering the models, which were announced in a previous paper. (orig.)

Interaction, Critical Thinking, and Social Network Analysis (SNA in Online Courses

Directory of Open Access Journals (Sweden)

Joan Thormann

2013-07-01

Full Text Available This study tried to ascertain a possible relationship between the number of student moderators (1, 2, and 3, online interactions, and critical thinking of K-12 educators enrolled in an online course that was taught from a constructivist approach. The course topic was use of technology in special education. Social network analysis (SNA and measures of critical thinking (Newman, Webb, & Cochrane, 1995 were used to research and assess if there was a difference in interaction and critical thinking between 1, 2, or 3 student moderators who facilitated a forum discussion of an assignment in an online course. The same course was repeated over three years. Each year either 1, 2, or 3 students moderated. The analysis indicated more discussion per non-moderating student with the three student moderated group. Using SNA we found that there was only one noticeable difference among the three groups which was in the value of network centralization. Using critical thinking measures the three student moderator group scored higher in five of the eight critical thinking categories. Variations in instructor presence in the online courses may have influenced these findings.

Exemption, exception and other criteria for transport criticality safety

International Nuclear Information System (INIS)

Mennerdahl, D.

2004-01-01

Many strange concepts, requirements and specifications related to criticality safety are present in the Regulations. Some earlier problems have been corrected but, going back to 1961 and the first edition of the Regulations, it seems as many changes have been to the worse. Fissile material was defined correctly as a material that could consist of or contain fissile nuclides. Materials consisting of pure fissile nuclides don't exist but are important in package designs. 238 Pu was included as a fissile nuclide only as an emergency, because there was no alternative, but this caused some people to think that all nuclides supporting criticality are fissile. Neutron interaction between different (non-identical) packages had to be evaluated, making the transport index or allowable number of packages a credible safety control. That is not true anymore. The 15 gram exception limit for fissile nuclides was combined with a transport mode limit, similar to but more restrictive than the current consignment limit. The confinement system was introduced to help with formulation of a single requirement for safety of the containment system but is becoming something very different. Controls before the first use of a packaging have become controls of the first use of a package, supporting multiple shipments of the same package. The lack of exemption limits for fissile material essentially makes all radioactive materials fissile (all radioactive material contains some fissile atoms). Radioactive material seems to be defined without consideration of the criticality hazard of the material. LSA materials are defined with consideration of criticality, but only relates to quantities in fissile exceptions when other properties can be equally or more important. In July 2004, a number of proposals to IAEA have been submitted by Sweden to improve and expand the criticality safety control of the Regulations. Essential is the introduction of the fissionable nuclide and material concepts in

Exemption, exception and other criteria for transport criticality safety

Energy Technology Data Exchange (ETDEWEB)

Mennerdahl, D. [E Mennerdahl Systems, Taeby (Sweden)

2004-07-01

Many strange concepts, requirements and specifications related to criticality safety are present in the Regulations. Some earlier problems have been corrected but, going back to 1961 and the first edition of the Regulations, it seems as many changes have been to the worse. Fissile material was defined correctly as a material that could consist of or contain fissile nuclides. Materials consisting of pure fissile nuclides don't exist but are important in package designs. {sup 238}Pu was included as a fissile nuclide only as an emergency, because there was no alternative, but this caused some people to think that all nuclides supporting criticality are fissile. Neutron interaction between different (non-identical) packages had to be evaluated, making the transport index or allowable number of packages a credible safety control. That is not true anymore. The 15 gram exception limit for fissile nuclides was combined with a transport mode limit, similar to but more restrictive than the current consignment limit. The confinement system was introduced to help with formulation of a single requirement for safety of the containment system but is becoming something very different. Controls before the first use of a packaging have become controls of the first use of a package, supporting multiple shipments of the same package. The lack of exemption limits for fissile material essentially makes all radioactive materials fissile (all radioactive material contains some fissile atoms). Radioactive material seems to be defined without consideration of the criticality hazard of the material. LSA materials are defined with consideration of criticality, but only relates to quantities in fissile exceptions when other properties can be equally or more important. In July 2004, a number of proposals to IAEA have been submitted by Sweden to improve and expand the criticality safety control of the Regulations. Essential is the introduction of the fissionable nuclide and material

Critical experiments simulating accidental water immersion of highly enriched uranium dioxide fuel elements

International Nuclear Information System (INIS)

Ponomarev-Stepnoi, N.N.; Glushkov, L.S.

2003-01-01

The paper focuses on experimental analysis of nuclear criticality safety at accidental water immersion of fuel elements of the Russian TOPAZ-2 space nuclear power system reactor. The structure of water-moderated heterogeneous critical assemblies at the NARCISS facility is described in detail, including sizes, compositions, densities of materials of the main assembly components for various core configurations. Critical parameters of the assemblies measured for varying number of fuel elements, height of fuel material in fuel elements and their arrangement in the water moderator with a uniform or variable spacing are presented. It has been found from the experiments that at accidental water immersion of fuel elements involved, the minimum critical mass equal to approximately 20 kg of uranium dioxide is achieved at 31-37 fuel elements. The paper gives an example of a physical model of the water-moderated heterogeneous critical assembly with a detailed characterization of its main components that can be used for calculations using different neutronic codes, including Monte Carlo ones. (author)

Upper critical fields and critical current densities of Fe-based superconductors as compared to those of other technical superconductors

Energy Technology Data Exchange (ETDEWEB)

Pallecchi, I., E-mail: ilaria.pallecchi@spin.cnr.it [CNR-SPIN, Corso Perrone 24, 16152 Genova (Italy); Tropeano, M. [Columbus Superconductors S.p.A, Via delle Terre Rosse 30, 16133 Genova (Italy); Lamura, G. [CNR-SPIN, Corso Perrone 24, 16152 Genova (Italy); Pani, M. [Dipartimento di Chimica e Chimica Industriale, Universita di Genova, Via Dodecaneso 31, 16146 Genova (Italy); Palombo, M. [Columbus Superconductors S.p.A, Via delle Terre Rosse 30, 16133 Genova (Italy); Dipartimento di Chimica e Chimica Industriale, Universita di Genova, Via Dodecaneso 31, 16146 Genova (Italy); Dipartimento di Fisica, Universita di Genova, Via Dodecaneso 33, 16146 Genova (Italy); Palenzona, A. [Dipartimento di Chimica e Chimica Industriale, Universita di Genova, Via Dodecaneso 31, 16146 Genova (Italy); Putti, M. [CNR-SPIN, Corso Perrone 24, 16152 Genova (Italy); Dipartimento di Fisica, Universita di Genova, Via Dodecaneso 33, 16146 Genova (Italy)

2012-11-20

Three years since the discovery by the Hosono's group of Fe-based superconductors, an enormous number of compounds, belonging to several different families have been discovered and fundamental properties have been deeply investigated in order to clarify the interplay between magnetisms and superconductivity in these compounds. Indeed, the actual potential of these compounds for practical applications remains still unclear. Fe-based superconductors are midway between high temperature superconductors (HTSCs) and MgB{sub 2}. In Fe-based superconductors the critical current is rather independent of the field, similarly to HTSCs, as a consequence of the exceptionally high upper critical field and strong pinning associated with nm-scale local modulations of the order parameter. They exhibit low anisotropy of the critical current with respect to the crystalline directions, as in the case of MgB{sub 2}, which allows current flow along the c-axis. However, Fe-based superconductor polycrystalline materials currently available still exhibit electromagnetic granularity, like the HTSCs, which suppresses superconducting current flow over long length. Whether the nature of such granularity is extrinsic, as due to spurious phases or cracks between grains or intrinsic, as related to misalignment of adjacent grains, is under debate. These aspects will be reviewed in the light of the recent literature.

Creating Critical Objectives and Assessments Using a Critical Communication Pedagogical Framework

Science.gov (United States)

Kahl, David H., Jr.

2018-01-01

Courses: Instructional Communication, Graduate Teaching Assistant Training Programs. Objectives: Students will (1) understand critical communication pedagogy (CCP); (2) evaluate traditional and critical objectives and assessment procedures; and (3) create critical objectives and assessment procedures.

Number names and number understanding

DEFF Research Database (Denmark)

Ejersbo, Lisser Rye; Misfeldt, Morten

2014-01-01

This paper concerns the results from the first year of a three-year research project involving the relationship between Danish number names and their corresponding digits in the canonical base 10 system. The project aims to develop a system to help the students’ understanding of the base 10 syste...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

Prevention of the causes and consequences of a criticality accident - measures adopted in France

International Nuclear Information System (INIS)

Fruchard, Y.; Lavie, J.M.

1966-01-01

The question of safety in regard to criticality accident risks has two aspects: prevention of the cause and limitation of the consequences. These two aspects are closely connected. The effort devoted to prevention of the causes depends on the seriousness of the possible human psychologic and economic consequences of the accident. The criticality accidents which have occurred in the nuclear industry, though few in number, do reveal the imperfect nature of the techniques adopted to prevent the causes, and also constitute the only available realistic basis for evaluating the consequences and developing measures to limit them. The authors give a analysis of the known causes and consequences of past criticality accidents and on this basis make a number of comments concerning: the validity of traditional safety criteria, the probability of accidents for different types of operations, characteristic accidents which can serve as models, and the extent of possible radiological consequences. The measures adopted in France to limit the consequences of a possible criticality accident under the headings: location, design and lay-out of the installations, accident detection, and dosimetry for the exposed personnel, are briefly described after a short account of the criteria used in deciding on them. (author) [fr

The quark-hadron transition in systems with net baryon number

International Nuclear Information System (INIS)

Olive, K.A.; Harvard Univ., Cambridge, MA

1982-01-01

The transition from quark matter to hadronic matter is examined in systems with arbitrary chemical potentials corresponding to net baryon number. In the hardron phase, both a Reid-type potential for nucleons and the ππ potential derived from Weinberg's effective lagrangian have been included. In the quark phase, a linear confining potential has been considered. Results are most sensitive to the slope of the confining potential, although qualitatively the behavior of the thermodynamic properties remain unchanged. The critical baryon density is found to remain roughly constant for all temperatures below the critical temperature, Tsub(c), then falls rapidly to zero as T → Tsub(c). Below Tsub(c) this density is about 30n 0 for K = 0.18 GeV 2 (the slope of the quark potential) and 23n 0 for K = 0.10 GeV 2 . (orig.)

Critical Care

Science.gov (United States)

Critical care helps people with life-threatening injuries and illnesses. It might treat problems such as complications from surgery, ... attention by a team of specially-trained health care providers. Critical care usually takes place in an ...

The evolution of an unsteady translating nonlinear rossby-wave critical layer

Science.gov (United States)

Haynes, Peter H.; Cowley, Stephen J.

When a monochromatic Rossby wave is forced on a flow which is slowly varying in time, the location of the critical line, where the phase speed of the wave is equal to that of the flow, also slowly changes. It is shown that this translation can play an important role in the vorticity balance near the critical line. The behavior of the translating critical layer is analyzed for various values of y, a parameter which measures the relative importance of nonlinear advection and translation. First, the vorticity equation in the critical layer is solved numerically in an important special case, where the velocity field in the critical layer is independent of the vorticity distribution and constant in time. The solutions reveal a number of new aspects of the behavior which are introduced by the translation, including the formation of a wake behind the critical layer, and the possibility of "trapping" of fluid particles in the critical layer if y exceeds a threshold value. Viewed in a frame of reference moving with the critical line the vorticity distribution may tend to a steady state, except in a "vorticity front" far downstream in the wake. If streamlines in the critical layer are open this steady state may be a predominantly inviscid one; if they are closed a steady state is possible only with non-zero dissipation. For both the unsteady and steady flows the translation allows the "logarithmic phase jump" across the critical layer, 4, to be non-zero and negative. Hence, even when the viscosity is vanishingly small, the critical layer can act as a strong "absorber" of Eliassen-Palm wave activity. Second, steady-state solutions are obtained numerically for a case when the velocity field in the critical layer is not independent of the vorticity distribution there. The interaction restricts the formation of closed streamlines, and an asymptotic open-streamline solution for large y can be found. The critical layer again acts an absorber of wave activity, but with decreasing e

Topology and Edge Modes in Quantum Critical Chains

Science.gov (United States)

Verresen, Ruben; Jones, Nick G.; Pollmann, Frank

2018-02-01

We show that topology can protect exponentially localized, zero energy edge modes at critical points between one-dimensional symmetry-protected topological phases. This is possible even without gapped degrees of freedom in the bulk—in contrast to recent work on edge modes in gapless chains. We present an intuitive picture for the existence of these edge modes in the case of noninteracting spinless fermions with time-reversal symmetry (BDI class of the tenfold way). The stability of this phenomenon relies on a topological invariant defined in terms of a complex function, counting its zeros and poles inside the unit circle. This invariant can prevent two models described by the same conformal field theory (CFT) from being smoothly connected. A full classification of critical phases in the noninteracting BDI class is obtained: Each phase is labeled by the central charge of the CFT, c ∈1/2 N , and the topological invariant, ω ∈Z . Moreover, c is determined by the difference in the number of edge modes between the phases neighboring the transition. Numerical simulations show that the topological edge modes of critical chains can be stable in the presence of interactions and disorder.

Critical factors for EIA implementation: literature review and research options.

Science.gov (United States)

Zhang, Jie; Kørnøv, Lone; Christensen, Per

2013-01-15

After decades of development, the gap between expectations of Environment Impact Assessments (EIA) and their practical performance remains significant. Research has been done to identify the critical factors for an effective implementation of EIA. However, this research, to a large extent, has not been cumulated and analysed comprehensively according to the stages of the EIA process. This paper contributes to the critical review of the literature on EIA implementation and effectiveness by cumulating mainly empirical findings in an implementation theoretical perspective. It focuses on the links between different critical factors and how they relate to different stages in the EIA and thus influence the decision making process. After reviewing 33 refereed journal articles published between 1999 and 2011, we identified 203 notions of critical factors. Of these, 102 related to different stages defined in our comprehensive EIA implementation model, and 101 were identified as general factors related to the whole EIA system. The number of notions of stage factors and general factors is thus about equal. An overlap between stage factors and general factors was found, which demonstrates that critical factors function differently in different cases. The function of the critical factors is complex and it is difficult to determine contingencies and causations. In the sources we examined, there is evidently an imbalance between in-depth empirical research and general knowledge, and the paper offers some suggestions for future research. Copyright © 2012 Elsevier Ltd. All rights reserved.

Critical Gap distance in Laser Butt-welding

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

1999-01-01

In a number of systematic laboratory experiments the critical gap distance that results in sound beads in laser butt welding is sought identified. By grinding the edges of the sheets, a number of "reference" welds are made and compared to the sheets with shear cut edges. In the tests the gap...... was set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with a thickness of 0.75 and 1.25 mm with and without zinc coating were analysed. A total of 120 welds were made at different welding speeds.As quality norm DIN 8563 was used to divide the welds into quality classes. A number of welds...... were also x-ray photographed.Of the weld combinations analysed 80 % were of high quality and 17 % of a non-acceptable quality. 90 % of the bad welds had a gap distance larger than 0.05 mm. The results showed that 85 % of the bad welds were shear cut and only 15 % grinded. Two third of the bad welds...

Critical Gap distance in Laser Butt-welding

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

of "reference" welds are made and compared to sheets with the edges shear cut. The gap distance is precisely controlled by inserting spacers between the sheets. In the tests the gap is set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with thickness? of 0.75 and 1.25 mm with and without zinc......When butt-welding metal sheets with high power lasers the gap distance between the sheets determine the final quality of the seam. In a number of systematic laboratory experiments the critical gap distance that results in sound beads is identified. By grinding the edges of the sheets, a number...... coating were analysed. A total of 120 welds are made at different welding speeds.As quality norm DIN 8563 is used to divide the welds into quality classes. Since this norm only deals with surface defects a number of welds are also x-ray photographed.According to DIN 8563 the welds have classes of either B...

75 FR 11918 - Hewlett Pachard Company, Business Critical Systems, Mission Critical Business Software Division...

Science.gov (United States)

2010-03-12

... Pachard Company, Business Critical Systems, Mission Critical Business Software Division, Openvms Operating... Colorado, Marlborough, Massachuetts; Hewlett Pachard Company, Business Critical Systems, Mission Critical... Company, Business Critical Systems, Mission Critical Business Software Division, OpenVMS Operating System...

Determining the nuclear data uncertainty on MONK10 and WIMS10 criticality calculations

Science.gov (United States)

Ware, Tim; Dobson, Geoff; Hanlon, David; Hiles, Richard; Mason, Robert; Perry, Ray

2017-09-01

The ANSWERS Software Service is developing a number of techniques to better understand and quantify uncertainty on calculations of the neutron multiplication factor, k-effective, in nuclear fuel and other systems containing fissile material. The uncertainty on the calculated k-effective arises from a number of sources, including nuclear data uncertainties, manufacturing tolerances, modelling approximations and, for Monte Carlo simulation, stochastic uncertainty. For determining the uncertainties due to nuclear data, a set of application libraries have been generated for use with the MONK10 Monte Carlo and the WIMS10 deterministic criticality and reactor physics codes. This paper overviews the generation of these nuclear data libraries by Latin hypercube sampling of JEFF-3.1.2 evaluated data based upon a library of covariance data taken from JEFF, ENDF/B, JENDL and TENDL evaluations. Criticality calculations have been performed with MONK10 and WIMS10 using these sampled libraries for a number of benchmark models of fissile systems. Results are presented which show the uncertainty on k-effective for these systems arising from the uncertainty on the input nuclear data.

Criticality design evaluation of the White Sands reactor building storage vault

International Nuclear Information System (INIS)

Philbin, J.S.; Nelson, W.E.

1979-03-01

This report describes the conceptual design and criticality evaluation of a storage vault for components of the fast pulse reactor at White Sands Missile Range. Criticality calculations were performed with the KENO-IV Monte Carlo code for various storage configurations in order to investigate the coupling between the portable reactor and storage arrays of spare reactor rings or other fissile components of similar mass. Abnormal conditions corresponding to pseudo--random arrays of the fuel components, as well as a number of flooded configurations, were also evaluated to assess criticality potential for highly unlikely situations. In a normal, dry configuration, the neutron self-multiplication factor, k/sub eff/, of the fully loaded 3 x 8 planar array plus the reactor is less than 0.87. A completely flooded vault was found to produce self-multiplication factors in excess of 1.2

Critical Transitions in Thin Layer Turbulence

Science.gov (United States)

Benavides, Santiago; Alexakis, Alexandros

2017-11-01

We investigate a model of thin layer turbulence that follows the evolution of the two-dimensional motions u2 D (x , y) along the horizontal directions (x , y) coupled to a single Fourier mode along the vertical direction (z) of the form uq (x , y , z) = [vx (x , y) sin (qz) ,vy (x , y) sin (qz) ,vz (x , y) cos (qz) ] , reducing thus the system to two coupled, two-dimensional equations. Its reduced dimensionality allows a thorough investigation of the transition from a forward to an inverse cascade of energy as the thickness of the layer H = π / q is varied.Starting from a thick layer and reducing its thickness it is shown that two critical heights are met (i) one for which the forward unidirectional cascade (similar to three-dimensional turbulence) transitions to a bidirectional cascade transferring energy to both small and large scales and (ii) one for which the bidirectional cascade transitions to a unidirectional inverse cascade when the layer becomes very thin (similar to two-dimensional turbulence). The two critical heights are shown to have different properties close to criticality that we are able to analyze with numerical simulations for a wide range of Reynolds numbers and aspect ratios. This work was Granted access to the HPC resources of MesoPSL financed by the Region Ile de France and the project Equip@Meso (reference ANR-10-EQPX-29-01).

International critical perspectives

NARCIS (Netherlands)

Sambrook, S.A.; Poell, R.F.

2014-01-01

The Problem Critical perspectives on human resource development (HRD) have emerged, across Europe and America, hailed as the future of the field. However, we note the paucity of critical perspectives globally, the problematic dominance of critical HRD activities in Western sites of theory and

An evaluation method of critical velocity for self-excited vibration of cross-shaped tube bundle in cross flow

International Nuclear Information System (INIS)

Inada, Fumio; Nishihara, Takashi; Yasuo, Akira; Morita, Ryo

2002-01-01

The applicability of the cross-shaped tube bundle as a lower plenum component of pressure vessel is examined to develop a next generation LWR in Japanese electric utilities. The flow-induced vibration characteristics are not understood well. Methods to evaluate turbulence induced vibration and vortex induced vibration were proposed by CRIEPI. In this study, vibration response is obtained experimentally to propose a method to evaluate self-excited vibration of cross-shaped tube bundle. The self-excited vibration was found to be generated when nondimensional flow velocity was above a critical value. The nondimensional critical velocity of normal configuration is 15% smaller than that of staggered configuration, which means that the nondimensional critical velocity of normal configuration can give conservative evaluation. The result of Reynolds number Re=6.2 x 10 4 agrees well with that of Re=6.8 x 10 5 , in which region, the effect of Reynolds number on the critical velocity is small. (author)

Critical crossover phenomena in compatible polymer blends studied with SANS

DEFF Research Database (Denmark)

Schwahn, D.; Janssen, S.; Willner, L.

1995-01-01

Polymer blends show a much larger 3d-Ising regime, e.g. a much larger Ginzburg number Gi than predicted by the Ginzburg criterion. This discrepancy is supposed to be explained by the compressibility or the free volume of the blend. In this paper we present and discuss the Gi number of polymer...... on monomeric microstructure and on pressure. This clearly shows that Gi is not a universal function. The observed strong decrease of Gi with pressure is a clear experimental proof that the critical crossover behaviour in polymer blends is indeed strongly influenced by the compressibility or free volume...

Critical thinking skills of undergraduate nursing students: description and demographic predictors.

Science.gov (United States)

Hunter, Sharyn; Pitt, Victoria; Croce, Nic; Roche, Jan

2014-05-01

This study investigated the critical thinking skills among undergraduate nursing students in Australia to obtain a profile and determine demographic predictors of critical thinking. There is universal agreement that being a critical thinker is an outcome requirement for many accreditation and registering nursing bodies. Most studies provide descriptive statistical information about critical thinking skills while some have studied the changes in critical thinking after an intervention. Limited research about factors that predict critical thinking skills is available. A cross-sectional descriptive study was conducted using convenience sampling. Two hundred and sixty-nine students were recruited across three years of an undergraduate programme in 2009. Most students' age ranged from under 20 to 34 years (58%), 87% were female, 91% were Australian and 23% of first and second year students had nursing associated experience external to the university. Data about critical thinking skills were collected via the Health Science Reasoning Test (HSRT). Linear regression analysis investigated the predictors of nursing students' critical thinking skills. The students in third year had a profile of critical thinking skills comparable with HSRT norms. Year of study predicted higher critical thinking scores for all domains (p<0.001) except the subscale, analysis. Nationality predicted higher scores for total CT skill scores (p<0.001) and subscales, inductive (p=0.001) and deductive reasoning (p=0.001). Nursing associated experience predicted higher scores for the subscale, analysis (p<0.001). Age and gender were not predictive. However, these demographic predictors only accounted for a small variance obtained for the domains of CT skills. An understanding of factors that predict nursing students' CT skills is required. Despite this study finding a number of significant predictors of nursing students' CT skills, there are others yet to be understood. Future research is recommended

Quantum criticality around metal-insulator transitions of strongly correlated electron systems

Science.gov (United States)

Misawa, Takahiro; Imada, Masatoshi

2007-03-01

Quantum criticality of metal-insulator transitions in correlated electron systems is shown to belong to an unconventional universality class with violation of the Ginzburg-Landau-Wilson (GLW) scheme formulated for symmetry breaking transitions. This unconventionality arises from an emergent character of the quantum critical point, which appears at the marginal point between the Ising-type symmetry breaking at nonzero temperatures and the topological transition of the Fermi surface at zero temperature. We show that Hartree-Fock approximations of an extended Hubbard model on square lattices are capable of such metal-insulator transitions with unusual criticality under a preexisting symmetry breaking. The obtained universality is consistent with the scaling theory formulated for Mott transitions and with a number of numerical results beyond the mean-field level, implying that preexisting symmetry breaking is not necessarily required for the emergence of this unconventional universality. Examinations of fluctuation effects indicate that the obtained critical exponents remain essentially exact beyond the mean-field level. It further clarifies the whole structure of singularities by a unified treatment of the bandwidth-control and filling-control transitions. Detailed analyses of the criticality, containing diverging carrier density fluctuations around the marginal quantum critical point, are presented from microscopic calculations and reveal the nature as quantum critical “opalescence.” The mechanism of emerging marginal quantum critical point is ascribed to a positive feedback and interplay between the preexisting gap formation present even in metals and kinetic energy gain (loss) of the metallic carrier. Analyses of crossovers between GLW type at nonzero temperature and topological type at zero temperature show that the critical exponents observed in (V,Cr)2O3 and κ-ET -type organic conductors provide us with evidence for the existence of the present marginal

Criticality safety studies for plutonium–uranium metal fuel pin fabrication facility

International Nuclear Information System (INIS)

Stephen, Neethu Hanna; Reddy, C.P.

2013-01-01

Highlights: ► Criticality safety limits for PUMP-F facility is identified. ► The fissile mass which can be handled safely during alloy preparation is 10.5 kg. ► The number of fuel slugs which can be handled safely during injection casting is 53. ► The number of fuel slugs which can be handled safely after fuel fabrication is 71. - Abstract: This study focuses on the criticality safety during the fabrication of fast reactor metal fuel pins comprising of the fuel type U–15Pu, U–19Pu and U–19Pu–6Zr in the Plutonium–Uranium Metal fuel Pin fabrication Facility (PUMP-F). Maximum amount of fissile mass which can be handled safely during master alloy preparation, Injection casting and fuel slug preparation following fuel pin fabrication were identified and fixed based on this study. In the induction melting furnace, the fissile mass can be limited to 10.5 kg. During fuel slug preparation and fuel pin fabrication, fuel slugs and pins were arranged in hexagonal and square lattices to identify the most reactive configuration. The number of fuel slugs which can be handled safely after injection casting can be fixed to be 53, whereas after fuel fabrication it is 71

The Increase of Critical Thinking Skills through Mathematical Investigation Approach

Science.gov (United States)

Sumarna, N.; Wahyudin; Herman, T.

2017-02-01

Some research findings on critical thinking skills of prospective elementary teachers, showed a response that is not optimal. On the other hand, critical thinking skills will lead a student in the process of analysis, evaluation and synthesis in solving a mathematical problem. This study attempts to perform an alternative solution with a focus on mathematics learning conditions that is held in the lecture room through mathematical investigation approach. This research method was Quasi-Experimental design with pre-test post-test design. Data analysis using a mixed method with Embedded design. Subjects were regular students enrolled in 2014 at the study program of education of primary school teachers. The number of research subjects were 111 students consisting of 56 students in the experimental group and 55 students in the control group. The results of the study showed that (1) there is a significant difference in the improvement of critical thinking ability of students who receive learning through mathematical investigation approach when compared with students studying through expository approach, and (2) there is no interaction effect between prior knowledge of mathematics and learning factors (mathematical investigation and expository) to increase of critical thinking skills of students.

Rayleigh Number Criterion for Formation of A-Segregates in Steel Castings and Ingots

DEFF Research Database (Denmark)

Rad, M. Torabi; Kotas, Petr; Beckermann, C.

2013-01-01

A Rayleigh number-based criterion is developed for predicting the formation of A-segregates in steel castings and ingots. The criterion is calibrated using available experimental data for ingots involving 27 different steel compositions. The critical Rayleigh number above which A-segregates can b......, the primary reason for this over-prediction is persumed to be the presence of a central zone of equiaxed grains in the casting sections. A-segregates do not form when the grain structure is equiaxed. © The Minerals, Metals & Materials Society and ASM International 2013...

Results of an OECD/NEA comparison of minimum critical values

International Nuclear Information System (INIS)

Weber, Wolf; Mennerdahl, Dennis

2003-01-01

An OECD/NEA expert group has compiled international data on existing minimum critical values for UO 2 -, PuO 2 -, UNH- and PuNH-systems to identify any significant discrepancies in the data and to propose explanations. The paper examines the spread of the compiled data and the influence of the time of generation of the data on the spread. It turns out, that the remarkable spread reduces by omitting values older than five years. Considering only data generated in the last three years, the spread further reduces. The number of cases with a large spread in the reported minimum critical values falls from 28 to four cases, and the smallest and largest data values converge. (author)

The origin of power-law distributions in self-organized criticality

International Nuclear Information System (INIS)

Yang, C B

2004-01-01

The origin of power-law distributions in self-organized criticality is investigated by treating the variation of the number of active sites in the system as a stochastic process. An avalanche is then regarded as a first-return random-walk process in a one-dimensional lattice. Power-law distributions of the lifetime and spatial size are found when the random walk is unbiased with equal probability to move in opposite directions. This shows that power-law distributions in self-organized criticality may be caused by the balance of competitive interactions. At the mean time, the mean spatial size for avalanches with the same lifetime is found to increase in a power law with the lifetime. (letter to the editor)

Formal methods for industrial critical systems a survey of applications

CERN Document Server

Margaria-Steffen, Tiziana

2012-01-01

"Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

Analysis of RA-8 critical facility core in some configurations

International Nuclear Information System (INIS)

Abbate, Maximo J.; Sbaffoni, Maria M.

2000-01-01

The RA-8 critical facility was designated and built to be used in the experimental plan of the 'CAREM' Project but is, in itself, very versatile and adequate to perform many types of other experiments. The present paper includes calculated estimates of some critical configurations and comparisons with experimental results obtained during its start up. Results for Core 1 with homogeneous arrangement of rods containing 1.8 % enriched uranium, showed very good agreement. In fact, an experimentally critical configuration was reached with 1.300 rods and calculated values were: 1.310 using the WIMS code and 1.148 from the CONDOR code. Moreover, it was verified that the estimated number of 3.4% enriched uranium rods to be fabricated is enough to build a heterogeneous core or even a homogeneous core with this enrichment. The replacement of 3.4 % enriched uranium by 3.6 % will not present problems related with the original plan. (author)

Healthcare librarians and the delivery of critical appraisal training: barriers to involvement.

Science.gov (United States)

Maden-Jenkins, Michelle

2011-03-01

  Many healthcare librarians are undertaking training in critical appraisal but a significant number are not cascading the training to their end-users.   To examine the barriers to healthcare librarian involvement in delivering critical appraisal training.   A questionnaire survey of 57 library services across 48 NHS Trust Library Services in north west England followed up with 21 semi-structured interviews.   Two types of barriers were noted: extrinsic barriers (organisational, environmental, training, role expectations) and intrinsic barriers (knowledge, skills, attitude).   These barriers are not mutually exclusive and by overcoming one of them it does not necessarily follow that healthcare librarians will engage in delivering critical appraisal skills training. The challenge lies in developing strategies to deal effectively with these barriers to encourage and support healthcare librarians in the delivery of critical appraisal training at a level at which they feel confident and able. © 2010 The authors. Health Information and Libraries Journal © 2010 Health Libraries Group.

Order parameter fluctuations at a critical point - an exact result about percolation -

International Nuclear Information System (INIS)

Botet, Robert

2011-01-01

The order parameter of the system in the critical state, is expected to undergo large non-Gaussian fluctuations. However, almost nothing is known about the mathematical forms of the possible probability distributions of the order parameter. A remarkable exception is the site-percolation on the Bethe lattice, for which the complete order-parameter distribution has been recently derived at the critical point. Surprisingly, it appears to be the Kolmogorov-Smirnov distribution, well known in very different areas of mathematical statistics. In the present paper, we explain first how this special distribution could appear naturally in the context of the critical systems, under the assumption (still virtually unstudied) of the exponential distribution of the number of domains of a given size. In a second part, we present for the first time the complete derivation of the order-parameter distribution for the critical percolation model on the Bethe lattice, thus completing a recent publication announcing this result.

HRM, climate and employee well-being : comparing an optimistic and critical perspective

NARCIS (Netherlands)

Veld, M.F.A.|info:eu-repo/dai/nl/341254282; Alfes, Kerstin

2017-01-01

A growing number of studies investigating the linkage between HRM and employee well-being largely supports a positive perspective on HRM (HRM positively affects employee well-being). There is only a limited body of empirical evidence that supports a critical perspective (HRM negatively affects

Living in critical times: The impact of critical incidents on frontline ambulance personnel--a qualitative perspective.

LENUS (Irish Health Repository)

Gallagher, Sharon

2007-01-01

Little is known about the impact of Critical Incidents (CIs) on the lives of ambulance personnel. One-to-one interviews were conducted with 27 participants who had experienced CIs during the previous 12 months in order to: assess the nature and impact of CIs on health and well-being; examine attitudes toward support services; and explore barriers to service use. The results showed that incidents involving children, suicides, and grotesque mutilation were the most distressing. Participants reported a wide range of physical and mental health problems including sleep difficulties, angry outbursts, irrationality and feelings of alienation. Key themes included: low support service uptake due to fears relating to confidentiality and machismo; a perceived lack of concern and support from management; and a need for professional counselling and stress awareness training. Emergency Medical Controllers (EMCs) also reported a number of difficulties unique to their role. The findings suggest that exposure to CIs has a significant impact on health and well-being; this has important implications for recognizing and appropriately addressing the health and training needs of ambulance personnel, including the effective management of Critical Incident Stress.

Scaling functions for the Inverse Compressibility near the QCD critical point

Science.gov (United States)

Lacey, Roy

2017-09-01

The QCD phase diagram can be mapped out by studying fluctuations and their response to changes in the temperature and baryon chemical potential. Theoretical studies indicate that the cumulant ratios Cn /Cm used to characterize the fluctuation of conserved charges, provide a valuable probe of deconfinement and chiral dynamics, as well as for identifying the position of the critical endpoint (CEP) in the QCD phase diagram. The ratio C1 /C2 , which is linked to the inverse compressibility, vanishes at the CEP due to the divergence of the net quark number fluctuations at the critical point belonging to the Z(2) universality class. Therefore, it's associated scaling function can give insight on the location of the critical end point, as well as the critical exponents required to assign its static universality class. Scaling functions for the ratio C1 /C2 , obtained from net-proton multiplicity distributions for a broad range of collision centralities in Au+Au (√{sNN} = 7.7 - 200 GeV) collisions will be presented and discussed.

Prediction calculation of HTR-10 fuel loading for the first criticality

International Nuclear Information System (INIS)

Jing Xingqing; Yang Yongwei; Gu Yuxiang; Shan Wenzhi

2001-01-01

The 10 MW high temperature gas cooled reactor (HTR-10) was built at Institute of Nuclear Energy Technology, Tsinghua University, and the first criticality was attained in Dec. 2000. The high temperature gas cooled reactor physics simulation code VSOP was used for the prediction of the fuel loading for HTR-10 first criticality. The number of fuel element and graphite element was predicted to provide reference for the first criticality experiment. The prediction calculations toke into account the factors including the double heterogeneity of the fuel element, buckling feedback for the spectrum calculation, the effect of the mixture of the graphite and the fuel element, and the correction of the diffusion coefficients near the upper cavity based on the transport theory. The effects of impurities in the fuel and the graphite element in the core and those in the reflector graphite on the reactivity of the reactor were considered in detail. The first criticality experiment showed that the predicted values and the experiment results were in good agreement with little relative error less than 1%, which means the prediction was successful

Safety-critical Java on a Java processor

DEFF Research Database (Denmark)

Schoeberl, Martin; Rios Rivas, Juan Ricardo

2012-01-01

The safety-critical Java (SCJ) specification is developed within the Java Community Process under specification request number JSR 302. The specification is available as public draft, but details are still discussed by the expert group. In this stage of the specification we need prototype...... implementations of SCJ and first test applications that are written with SCJ, even when the specification is not finalized. The feedback from those prototype implementations is needed for final decisions. To help the SCJ expert group, a prototype implementation of SCJ on top of the Java optimized processor...

A cost effective approach for criticality accident analysis of a DOE SNF storage facility

International Nuclear Information System (INIS)

Garrett, R.L.; Couture, G.F.; Gough, S.T.

1997-01-01

This paper presents the methodologies used to derive criticality accident analyses for a spent nuclear fuel receipt, storage, handling, and shipping facility. Two criticality events are considered: process-induced and Natural Phenomena Hazards (NPH)-induced. The criticality analyses required the development of: (1) the frequency at which each sceanario occurred, (2) the estimated number of fissions for each scenario, and (3) the consequences associated with each criticality scenario. A fault tree analysis was performed to quantify the frequency of criticality due to process-induced events. For the frequency analysis of NPH-induced criticality, a probabilistic approach was employed. To estimate the consequences of a criticality event, the resulting fission yield was determined using a probabilistic approach. For estimating the source term, a 95% amount of overall conservatism was targeted. This methodology applied to the facility criticality scenarios indicated that: (1) the 95th percentile yield levels from the historical yield distributions are approximately 5 x 10 17 fissions and 5 x 10 18 fissions for internal event and NPH-induced criticality event, respectively; and (2) using probabilistic Latin Hypercube Sampling, the downwind 95th percentile dose to a receptor at the US DOE reservation boundary is 2.2 mrem. This estimate is compared to the bounding dose of 1.4 rem. 4 refs., 1 fig

Reimagining Critical Theory

Science.gov (United States)

Rexhepi, Jevdet; Torres, Carlos Alberto

2011-01-01

This paper discusses Critical Theory, a model of theorizing in the field of the political sociology of education. We argue for a "reimagined" Critical Theory to herald an empowering, liberatory education that fosters curiosity and critical thinking, and a means for successful bottom-up, top-down political engagement. We present arguments…

Monte Carlo analysis of critical phenomenon of the Ising model on memory stabilizer structures

International Nuclear Information System (INIS)

Viteri, C. Ricardo; Tomita, Yu; Brown, Kenneth R.

2009-01-01

We calculate the critical temperature of the Ising model on a set of graphs representing a concatenated three-bit error-correction code. The graphs are derived from the stabilizer formalism used in quantum error correction. The stabilizer for a subspace is defined as the group of Pauli operators whose eigenvalues are +1 on the subspace. The group can be generated by a subset of operators in the stabilizer, and the choice of generators determines the structure of the graph. The Wolff algorithm, together with the histogram method and finite-size scaling, is used to calculate both the critical temperature and the critical exponents of each structure. The simulations show that the choice of stabilizer generators, both the number and the geometry, has a large effect on the critical temperature.

On the number of independent cultural traits carried by individuals and populations.

Science.gov (United States)

Lehmann, Laurent; Aoki, Kenichi; Feldman, Marcus W

2011-02-12

In species subject to individual and social learning, each individual is likely to express a certain number of different cultural traits acquired during its lifetime. If the process of trait innovation and transmission reaches a steady state in the population, the number of different cultural traits carried by an individual converges to some stationary distribution. We call this the trait-number distribution. In this paper, we derive the trait-number distributions for both individuals and populations when cultural traits are independent of each other. Our results suggest that as the number of cultural traits becomes large, the trait-number distributions approach Poisson distributions so that their means characterize cultural diversity in the population. We then analyse how the mean trait number varies at both the individual and population levels as a function of various demographic features, such as population size and subdivision, and social learning rules, such as conformism and anti-conformism. Diversity at the individual and population levels, as well as at the level of cultural homogeneity within groups, depends critically on the details of population demography and the individual and social learning rules.

How Critical Is Critical Thinking? FACTC Focus, 2010

Science.gov (United States)

Doerr, Mark, Ed.

2010-01-01

"FACTC Focus" is a publication of Faculty Association of Community and Technical Colleges (FACTC) with the purpose of presenting diverse views on faculty issues. Included in this issue are: (1) LOL: The Easy ROUTE TO Critical Thinking (Barbara B. Parsons); (2) Critical Thinking: We Know It When We (Don't) See It (Jared Anthony); (3) Critical…

Line printing solution-processable small molecules with uniform surface profile via ink-jet printer.

Science.gov (United States)

Liu, Huimin; Xu, Wei; Tan, Wanyi; Zhu, Xuhui; Wang, Jian; Peng, Junbiao; Cao, Yong

2016-03-01

Line printing offers a feasible approach to remove the pixel well structure which is widely used to confine the ink-jet printed solution. In the study, a uniform line is printed by an ink-jet printer. To achieve a uniform surface profile of the printed line, 10vol% low-volatile solvent DMA (3,4-Dimethylanisole) is mixed with high-volatile solvent Pxy (p-xylene) as the solvent. After a solution-processable small molecule is dissolved, the surface tension of DMA solution becomes lower than that of Pxy solution, which creates an inward Marangoni flow during the solvent evaporation. The inward Marangoni flow balances out the outward capillary flow, thereby forming a flat film surface. The line width of the printed line depends on the contact angle of the solution on the hole injection layer. Copyright © 2015 Elsevier Inc. All rights reserved.

Between Traditions: Stephen Ball and the Critical Sociology of Education

Science.gov (United States)

Apple, Michael W.

2013-01-01

Stephen Ball's work has deservedly received a good deal of attention. In this article, I detail a number of tasks in which the critical sociologist of education--as a "public intellectual"--should engage. I then place Ball's work within these tasks and evaluate his contributions to them. In the process, I show that one of the…

THE CRITICAL PEDAGOGY AND THE ACADEMIC SUCCESS FOR EVERYONE