Etude aerodynamique d'un jet turbulent impactant une paroi concave

Science.gov (United States)

LeBlanc, Benoit

Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent

Contribution to the study of the geophysical behaviour of lead-210 by application of alpha spectrometry; Contribution a l'etude du comportement geophysique du plomb 210 par application de la spectrometrie alpha

Energy Technology Data Exchange (ETDEWEB)

Nezami, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

A study of the changes in the lead-210 contents of rain-water and of water produced by melting polar ice has required the development of a method for dosing lead-210, an {alpha} emitter. This method is 40 times more sensitive than that which measures the lead-210 by bismuth-210, a ({beta} emitter. The first part of the report presents the study of a spectrometry using semiconductor detectors; a catalogue of a spectra shows the advantages of this method. In the second part will be found at first a new chemical separation method for polonium-210 and the results obtained with this method. The main results obtained on the geophysical behaviour of lead-210 are the following: - the monthly lead-210 and polonium-210 contents in rain water are approximately constant with time. - in the Gif-sur-Yvette region, the clean-up by 'dry fall-out' can attain 40 to 50 per cent of the total fall-out. - a study of Antarctic ice samples makes it possible to determine an annual accumulation rate equivalent to 13.8 cm of water and to show discrepancies in the periodic concentrations which correspond to the latest maxima of solar activity. - a balance is drawn up between the radon produced by the continents and the lead-210 fall-out. (author) [French] Une etude sur les variations de la teneur en plomb 210 des eaux de pluie et des eaux de fusion des glaces polaires a necessite la mise au point d'une methode de dosage du plomb 210 emetteur {alpha}. Cette methode permet d'obtenir une sensibilite quarante fois superieure a celle dosant le plomb 210 par le bismuth 210 emetteur {beta}. La premiere partie du travail presente l'etude de la spectrometrie {alpha} par detecteur a semiconducteurs, un catalogue de spectres {alpha} met en evidence les avantages de cette methode. Dans la deuxieme partie on trouvera en premier lieu une nouvelle methode chimique de separation du polonium 210 ainsi que les resultats obtenus grace a cette methode. Les principaux resultats sur le comportement geophysique du

Study of the improvement of the radioprotective power of imidazole; Etude de l'amelioration du pouvoir radioprotecteur de l'imidazole

Energy Technology Data Exchange (ETDEWEB)

Mourret, A; Rinaldi, R [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

1968-07-01

In studies made on the Imidazole radioprotective power, the authors have attempted to neutralize its convulsive properties by the Depamide so as to decrease drug toxicity. Then, having studied in what manner the two products simultaneous action could carry one increase of radioprotective activity, they have established that if the Depamide permits to decrease very much the Imidazole toxicity, the variation of radioprotection power which is subject to animal sex, generally increases for females and decreases for males. (authors) [French] Dans le cadre de l'etude du pouvoir radioprotecteur de l'Imidazole, les auteurs ont essaye de neutraliser les proprietes convulsivantes de cette substance par le Depamide afin d'en dimunuer la toxicite. Ayant ensuite etudie dans quelle mesure l'action simultanee de ces deux produits pouvait apporter une amelioration de l'activite radioprotectrice, ils ont constate que si le Depamide permet de diminuer tres sensiblement la toxicite de l'Imidazole, la variation du pouvoir radioprotecteur, qui depend du sexe de l'animal, augmente en general pour les femelles et diminue pour les males. (auteurs)

Contribution to the study of the geophysical behaviour of lead-210 by application of alpha spectrometry; Contribution a l'etude du comportement geophysique du plomb 210 par application de la spectrometrie alpha

Energy Technology Data Exchange (ETDEWEB)

Nezami, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

A study of the changes in the lead-210 contents of rain-water and of water produced by melting polar ice has required the development of a method for dosing lead-210, an {alpha} emitter. This method is 40 times more sensitive than that which measures the lead-210 by bismuth-210, a ({beta} emitter. The first part of the report presents the study of a spectrometry using semiconductor detectors; a catalogue of a spectra shows the advantages of this method. In the second part will be found at first a new chemical separation method for polonium-210 and the results obtained with this method. The main results obtained on the geophysical behaviour of lead-210 are the following: - the monthly lead-210 and polonium-210 contents in rain water are approximately constant with time. - in the Gif-sur-Yvette region, the clean-up by 'dry fall-out' can attain 40 to 50 per cent of the total fall-out. - a study of Antarctic ice samples makes it possible to determine an annual accumulation rate equivalent to 13.8 cm of water and to show discrepancies in the periodic concentrations which correspond to the latest maxima of solar activity. - a balance is drawn up between the radon produced by the continents and the lead-210 fall-out. (author) [French] Une etude sur les variations de la teneur en plomb 210 des eaux de pluie et des eaux de fusion des glaces polaires a necessite la mise au point d'une methode de dosage du plomb 210 emetteur {alpha}. Cette methode permet d'obtenir une sensibilite quarante fois superieure a celle dosant le plomb 210 par le bismuth 210 emetteur {beta}. La premiere partie du travail presente l'etude de la spectrometrie {alpha} par detecteur a semiconducteurs, un catalogue de spectres {alpha} met en evidence les avantages de cette methode. Dans la deuxieme partie on trouvera en premier lieu une nouvelle methode chimique de separation du polonium 210 ainsi que les resultats obtenus grace a cette methode. Les principaux resultats sur le

Study of the age of uranium-containing mineral deposits in the Limouzat, the bois-noir mountains (12963); Etude des ages des mineralisations uraniferes du gisement du Limouzat, Massif des bois-noirs (1963)

Energy Technology Data Exchange (ETDEWEB)

Durand, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

The present work is concerned with 7 different samples taken at various levels in the Limouzat mine in the Bois-Noirs mountains. It has been possible to show that the uranium dates from 265 M.Y. and that a rearrangement occurred 65 M.Y. ago. A {gamma}-spectrometer study which was originally intended to show the existence of the lack of balance in the radon circulation, has made it possible to show that the {gamma} spectra recorded on various samples could be erroneous. We observed in effect that the presence of lead, iron, etc., had a strong influence on the {gamma} spectrum of the radium family, whereas all research workers have considered that concentrations in the uranium ore were negligible and had no significant effect on the study of the {gamma} spectra of the samples. It is obvious that an interesting study has to be undertaken on the screen effects of the different cations existing in the ores. We believe that it is possible to show the presence of certain elements directly by {gamma}-spectrometry. The ages measured with the mass spectrometer present two types of disagreement but these have been explained by considering that there occurred a first arrival of lead followed by a rearrangement and, at certain points, a second arrival at this date. Finally, the deposit studied undergoes a circulation of uranium and of radon. (author) [French] La presente etude a porte sur 7 prelevements differents effectues a divers niveaux de la mine du Limouzat, massif des Bois-Noirs. Elle a permis de mettre en evidence une premiere venue d'uranium il y a 265 M.A., suivie d'un remaniements il y a 65 M.A. Une etude au spectrometre {gamma} destinee, a l'origine, a prouver les desequilibres dus aux circulations de radon a permis de montrer que les spectres {gamma} enregistres sur divers echantillons pouvaient etre entaches d'erreurs. Nous nous sommes apercus en effet que la presence de plomb, de fer..., avait une forte influence sur le spectre {gamma} de la famille du radium

Blowing loop in the EL-4 reactor: CO{sub 2} flow control analogue study; Boucle de soufflage de la centrale EL-4 - regulation du debit CO{sub 2} - etude analogique

Energy Technology Data Exchange (ETDEWEB)

Chazal, G; Merle, J P; Guillemard, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Leroy, C; Robin, L; Jacquin, J C; Cornudet, A [Societe INDATOM, France (France)

1966-07-01

This report describes one study which contributed to the construction of the Monts d'Arree nuclear power station: EL-4. The reactor is cooled by a CO{sub 2} current provided by 3 turbo-blower groups. The priming vapour for the turbines is taken at the exit of the main CO{sub 2} - H{sub 2}O exchangers. The operation of EL 4 is based on a high degree of centralization of the controls which attributes an important role to the general regulation circuits. This general regulation includes in particular an internal blowing loop which controls the CO{sub 2} flow. The study of the control of this CO{sub 2} flow is made up of 3 parts: - analogue representation of the reactors cooling circuit and of the turbo blower unit. - first test campaign using the analogue computer describing the natural behaviour of the system in the absence of control. theoretical determination of the regulation factors; definition of the regulation using an analogue computer and second test campaign for recording the performances of the blowing loop. The 4. part of the report deals with the analogue study: analogue equations - development. (authors) [French] Ce rapport prend place parmi les etudes de realisation de la Centrale des Monts d'Arree EL-4. Le reacteur est refroidi par une circulation de CO{sub 2} assuree par 3 groupes turbosoufflantes. La vapeur d'entrainement des turbines est prelevee a la sortie des echangeurs principaux CO{sub 2} - H{sub 2}O. L'exploitation de EL-4 repose sur une centralisation poussee des moyens de controle-commande qui attribue un role essentiel aux circuits de regulation generale. Cette regulation generale comporte en particulier une boucle interne de soufflage qui realise un asservissement du debit de CO{sub 2}. L'etude de cette regulation du debit CO{sub 2} comprend 3 parties: - representation analogique du circuit de refroidissement du reacteur et de l'ensemble turbine-soufflante. - premiere campagne d'essais sur calculateur analogique decrivant le comportement

Study of deformation mechanisms of zinc bicrystals by thermal cycling (1963); Etude des mecanismes de deformation par cyclage thermique de bicristaux de zinc (1963)

Energy Technology Data Exchange (ETDEWEB)

Mondon, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1963-06-15

The thermal cycling of zinc bicrystals has been studied in order to precise the thermal cycling growth mechanism, proposed by Burke and TURKALO, specially the dependence of 'equi-cohesive' temperature of grains on their mutual orientation and the parameters of the thermal cycle. Dilatometric studies showed that a bicrystal had no equi-cohesive temperature and that the grain-boundary develops stress at all temperatures. The creep of single and bicrystal have been studied on a dilatometer with stress below the Yield-stress. At constant temperature secondary creep appears after a transient period, at cycled temperature creep stays transient for strains of about 10{sup -4} to 10{sup -3} when the crystal is plastically hard. Micrographic investigations show that grain-boundary migration accompanies the grain boundary shearing and that cycles produce a strong polygonisation, corroborating the fact that the grain boundary remains a stress-generator and that creep occurs in the volume of grains. The discussion of results shows that the transient creep of hard grain in a bicrystal makes the thermal cycling irreversible and allows on elongation at each cycle if that have the lower expansion coefficient. (author) [French] Le cyclage thermique de bicristaux de zinc a ete etudie pour preciser le mecanisme de la croissance au cyclage thermique propose par BURKE et TURKALO, notamment la temperature d' 'equicohesion' des grains en fonction de leur orientation mutuelle et du regime de cyclage impose. Des essais dilatometriques ont montre qu'un bicristal ne presentait pas de temperature d'equicohesion et que le joint exercait des contraintes quelle que soit la temperature superieure du cycle. Le fluage de monocristaux et de bicristaux a ete etudie sur un dilatometre avec des contraintes inferieures a la limite elastique. A temperature constante le fluage secondaire apparait apres une periode transitoire, a temperature cyclee le fluage reste transitoire pour des deformations de l

Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

Energy Technology Data Exchange (ETDEWEB)

Amblard, J C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-07-15

The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

Contribution to the study of the vertical molten zone process (1963); Contribution a l'etude du procede de la zone fondue verticale (1963)

Energy Technology Data Exchange (ETDEWEB)

Lenzin, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

Construction and use of several molten zone apparatuses operating either vertically or horizontally. Efficient purification of uranyl nitrate hexahydrate but less successful in the case of other hydrated double salts and of zirconyl chloride in the hydrochloric gel form. Demonstration and study of the dissymmetry in the direction of the transport of the impurity during, the purification by a vertical molten zone process. (author) [French] Construction et utilisation de plusieurs appareils de zone fondue travaillant soit en vertical, soit en horizontal. Purification efficace du nitrate d'uranyle hexahydrate mais peu significative dans le cas des autres couples de sels hydrates et du chlorure de zirconyle a l'etat de gel chlorhydrique. Mise en evidence et etude de la dissymetrie sur le sens de transport de l'impurete au cours de la purification par zone fondue verticale. (auteur)

X-spectrographic method for plutonium detection. Application to contamination measurements in humans; Etude d'une methode de detection du plutonium par spectrographie X. Application a la mesure des contaminations sur l'homme

Energy Technology Data Exchange (ETDEWEB)

Trouble, Michel [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

After reviewing the radio-toxicology of plutonium 239 and conventional detection methods using its {alpha}-radiation, the author considers the measurement of the X emission spectrum of plutonium 239 using a proportional counter filled with argon under pressure. This preliminary work leads to the third part of this research involving the detailed study of the possibilities of applying thin alkali halide crystal scintillators to the detection of soft plutonium X-rays; there follows a systematic study of all the parameters liable to render the detection as sensitive as possible: movement due to the photomultiplier itself and its accessory electronic equipment, nature and size of the crystal scintillator as well as its mode of preparation, shielding against external parasitic radiation. Examples of some applications to the measurement of contamination in humans give an idea of the sensitivity of this method. (author) [French] Apres un apercu de la radiotoxicologie du plutonium 239 et des methodes classiques de detection par son rayonnement {alpha}, on etudie le spectre d'emission X du plutonium 239 avec un compteur proportionnel rempli avec de l'argon sous pression. Ce travail preliminaire permet d'aborder la troisieme partie de cette etude dans laquelle nous examinons d'une fagon approfondie les possibilites d'application des cristaux scintillateurs minces d'halogenure alcalin a la detection du rayonnement X mou du plutonium; suit une etude systematique de tous les parametres susceptibles de rendre la detection aussi sensible que possible: mouvement propre du photomultiplicateur et de l'electronique associee, nature et dimensions du cristal scintillateur ainsi que son mode de fabrication, blindage contre les rayonnements parasites exterieurs. Quelques applications a la mesure des contaminations sur l'homme permettent d'apprecier la sensibilite de cette methode. (auteur)

Contribution to the study of several chemical hazards in the Centre d'Etudes Nucleaires of Fontenay-aux-Roses; Contribution a l'etude de quelques nuisances chimiques au centre d'etudes nucleaires de Fontenay-aux-Roses

Energy Technology Data Exchange (ETDEWEB)

Megemont, C; Grau, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-10-01

From the checking of 2750 index cards of hazards, the study relates the distribution of the chemical hazards in the Centre d'Etudes Nucleaires of Fontenay-aux-Roses. Those concerning the greatest number of agents in the Centre are classified according to the categories corresponding to the different conditions of working. Thus, the most important are put forward. Then, the authors rapidly make a review of hazards which may have some special interest because they appear more specific of the nuclear energy or because they are the most frequently noted on the index cards of hazards. The case of the tributylphosphate is studied more precisely. (authors) [French] A partir de l'examen de 2750 fiches de nuisances, l'etude porte sur la repartition des nuisances chimiques au Centre d'Etudes Nucleaires de Fontenay-aux-Roses. Celles qui concernent le plus grand nombre d'agents du Centre sont classees selon les categories correspondant aux differentes conditions de travail. Les plus importantes d'entre elles sont ainsi mises en evidence. | Les auteurs passent ensuite en revue, rapidement, les nuisances qui peuvent presenter un interet particulier soit parce qu'elles semblent plus specifiques de l'Energie Nucleaire, soit parce qu'on les rencontre le plus frequemment sur les fiches de nuisances. Le cas du tributylphosphate est envisage de facon plus detaillee. (auteurs)

The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay; Formation des scientifiques et des techniciens au Centre d'Etudes Nucleaires de Saclay

Energy Technology Data Exchange (ETDEWEB)

Debiesse, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' waeated (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author)Fren. [French] Les besoins considerables actuels et previsibles en chercheurs et scientifiques necessites par l'avevement de l'energie nucleaire imposaient au Commissariat a I'Energie atomique un effort particulier pour augmenter la formation quantitative et qualitative des scientifiques. Les moyens les plus divers ont ete mis en oeuvre: 1- Creation de l'Institut National des Sciences et Techniques Nucleaires par decret de la Presidence du Conseil et de l'Education Nationale en date du 18.6.57. Cet Institut d'Enseignement Superieur (250 etudiants) donne des cours en: genie atomique, mecanique quantique, theorie et technique des Accelerateurs de particules, metallurgie speciale, radiobiologie

Creep of uranium dioxide: bending test and mechanical behaviour; Etude du fluage du dioxyde d'uranium: caracterisation par essais de flexion et modelisation mecanique

Energy Technology Data Exchange (ETDEWEB)

Colin, Ch

2003-09-01

These PhD work in the frame of Pellet-Cladding Interactions studies, in the fuel assemblies of nuclear plants. Electricite de France (EDF) must well demonstrate and insure the integrity of the cladding. For that purpose, the viscoplastic behaviour of the nuclear fuel has to be known and, if possible, controlled. This PhD work aimed to characterize the creep of uranium dioxide, in conditions of transient power regime. First, a literature survey on mechanical behaviour of UO{sub 2} revealed that the ceramic was essentially studied with compressive tests, and that its creep behaviour is characterized by two domains, depending on the stress level. To estimate the loadings in a fuel pellet, EDF and CEA developed specific global codes. A simulation during a power ramp allowed the order of magnitude of the loadings in the pellet to be determined (temperature, thermal gradients, strains, strain rate...). The stress calculation using a finite element simulation requires the identification of behaviour laws, able to describe the behaviour under small strains, low strain rates, and under tensile stresses. Starting from this observation, three point bending method has been chosen to test the uranium dioxide. As, for representativeness reasons, testing specimens cut in actual fuel pads was required in our study; a ten millimeters span has been used. For this study, a specific three-point testing device has been developed, that can tests specimens up to 2 000 C in a controlled atmosphere (Ar + 5% H{sub 2}). A special care has been taken for the measurement of the deflexion of the sample, which is measured using a laser beam, that allow an accuracy of {+-}2{mu}m to be reached at high temperature. Specimens with 0,5 to 1 mm thickness have been tested using this jig. A Norton's law describe, with respective stress exponent and activation energy values of 1.73 and 540 kJ.mole-1, provided a good description of the stationary creep rate. Then, the mechanical behaviour of the fuel

Radio-vulcanization of natural rubber in the latex phase. Study of an experimental 1 tonne per hour production; Radio-vulcanisation du caoutchouc naturel en phase latex. Etude d'une production experimentale de 1 tonne par heure

Energy Technology Data Exchange (ETDEWEB)

Leveque, P; Puig, J R; Roudeix, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

After briefly reviewing the main research carried out on the radio-vulcanization of latex and elastomers, a description is given of 4 types of cell which have been used successively with a view to industrial irradiation. They have made it possible to acquire the information necessary for resolving the main problem arising during irradiation - the formation of coagulum. The first two cell are designed for irradiation by a horizontal beam ('Dynamitron'), the two others use a vertical beam ('Circe'). The study of the properties of the rubber obtained shows it to compare favorably with 'Revultex'. In the appendix are given some characteristics of natural latex and information about its processing. (authors) [French] Apres un rappel des principales etudes sur la radio-vulcanisation du latex et des elastomeres, on decrit les quatre types de cellules successivement essayes en vue de l'irradiation industrielle. Ils ont permis d'acquerir les informations necessaires a la resolution du probleme principal pose par l'irradiation, la formation de coagulum au cours de celle,-ci. Les deux premiers sont concus pour l'irradiation par un faisceau horizontal ('Dynamitron'), les derniers par un faisceau vertical ('Circe'). L'etude des proprietes du caoutchouc obtenu montre qu'il se compare favorablement au 'Revultex'. Un apercu est donne en annexe des caracteristiques du latex naturel et de sa mise en oeuvre. (auteurs)

Study of cerenkov radiation. Production of {gamma} rays by electron accelerators; Etude du rayonnement de freinage. Production de rayons {gamma} par des accelerateurs d'electrons

Energy Technology Data Exchange (ETDEWEB)

Bernard, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

This study is a critical comparison of the theories of Bremsstrahlung. Experimental results obtained by the production of {gamma} radiation with electron accelerators are compared to the theoretical results in order to estimate the extent to which the various theories are valid. (author) [French] Cette etude est une synthese des theories du rayonnement de freinage. Des resultats experimentaux, obtenus par la production de rayonnements {gamma} avec des accelerateurs d'electrons, sont compares aux resultats theoriques afin d'evaluer les domaines de validite des diverses theories. (auteur)

Actes du colloque sur le bilinguisme, Universite de Neuchatel, 14/15 Septembre, 1981 (Proceedings of the Colloquium on Bilingualism, University of Neuchatel, September 14-15, 1981).

Science.gov (United States)

TRANEL, 1982

1982-01-01

This issue contains proceedings of a colloquium on linguistics at the University of Neuchatel: (1) "Propositions epistemologiques pour une etude du bilinguisme (Epistemological Propositions for a Study of Bilingualism)," by B. Py; (2) "Comment on di ca? Prolegomenes a une etude de la composante semantique du langage des migrants (How Do You Say…

Contribution to the study of the sintering of finely divided alumina; Contribution a l'etude du frittage de l'alumine finement divisee

Energy Technology Data Exchange (ETDEWEB)

Vergnon, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-07-01

Two crystalline forms of alumina, delta and alpha, were used to prepare compacts. The shrinkage of these compacts was investigated at different temperatures. The samples of alumina are composed of non porous, spherical particles, of a very high purity. Their mean diameter varies between 160 and 1 200 Angstrom for the delta alumina samples and between 400 and 1 200 Angstrom for the alpha alumina samples. The shrinkage of compacts, heated at a linearly increasing temperature (300 deg. C/h, slow heating) was studied in a A.D.A.M.E.L. dilatometer, modified to be used as a retractometer. The kinetics of the isothermal shrinkage of compacts after their rapid introduction (a few seconds, flash heating) in the high temperature zone of the furnace were followed with a photographic technique. It is shown that the heating rate influences the shrinkage of the compacts when they are heated at temperatures over 1 000 deg. C. The kinetics of the isothermal shrinkage, at temperature between 1000 deg. C and 1600 deg. C were thoroughly studied. Values of the apparent activation energy for the different classes of compacts are given. An interpretation of the results is proposed. It takes into account two different but interdependent mechanisms of sintering: the disappearance of porosity as a result of vacancy diffusion and the grain growth as a result of boundary migration. (author) [French] Deux formes cristallines de l'alumine, la forme delta et la forme alpha, ont ete utilisees pour confectionner des comprimes en vue d'une etude cinetique du frittage. Ces alumines d'une tres grande purete sont constituees de particules spheriques non poreuses, sensiblement homodispersees dont le diametre moyen varie entre 160 et 1200 Angstrom pour les echantillons de l'alumine delta et entre 400 et 1200 Angstrom pour ceux de l'alumine alpha. Le retrait des comprimes chauffes a temperature linerairement croissante (300 deg. C/h: chauffage lent) a ete suivi a l'aide du dilotometre A

Syndrome de Gougerot-Sjögren primitif du sujet âgé ...

African Journals Online (AJOL)

Les objectifs de notre etude est d'etudier les caracteristiques cliniques et immunologiques du syndrome de Gougerot Sjogren primitif (SGSp) du sujet age et les comparer a une population temoin plus jeune. Nous avons analyse retrospectivement les dossiers de 60 patients atteints de SGSp consecutifs, suivis au service de ...

ETUDE DU COMPORTEMENT MECANIQUE DU BETON CELLULAIRE AUTOCLAVE PRODUIT EN ALGERIE

Directory of Open Access Journals (Sweden)

R BELOUETTAR

2002-12-01

Full Text Available Ce travail présente une étude expérimentale du comportement mécanique du béton cellulaire autoclavé. L’étude est portée essentiellement sur une série d’essais mécaniques en compression quasistatique à différentes vitesses de déformation variables entre 10-4 s-1 et 10 s-1 et à deux états différents (état sec et état saturé d’eau. En général, l’augmentation de la vitesse de déformation donne une augmentation de la contrainte critique du béton cellulaire autoclavé. Le béton cellulaire autoclavé présente une sensibilité à la vitesse de déformation positive. La valeur du module d’élasticité est proche de la valeur standard (1.5 GPa pour un béton cellulaire autoclavé de masse volumique égale à 500-550 kg/m3.

The ultrasonic copper and brass decontamination study; Etude de la decontamination du cuivre et des laitons en presence d'ultra-sons

Energy Technology Data Exchange (ETDEWEB)

Courtault, J; Kerdelleau, J de; Mestre, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The use of ultra-sounds as a decontamination technic does not bring an absolute solution. As a function of the materials it seemed necessary to find what was the optimum conditions for using the ultra-sounds and to define not only the ultra-sonic factors but also the chemical solutions which bring some appreciable decontamination factors without bringing any too important corrosion processus. This report gives the results of this study applied to copper and brass. This study allowed to select some effective treatment baths on the two types of contamination: plutonium and fission products. (authors) [French] L'emploi des ultra-sons comme technique de decontamination n'amene pas une solution absolue. Il est apparu necessaire de rechercher en fonction de la nature du materiau a decontaminer quelles etaient les conditions optimales d'utilisation des ultra-sons et de definir alors non seulement les facteurs ultrasoniques mais encore les solutions chimiques qui apportent des facteurs de decontamination appreciables sans amener des phenomenes de corrosion trop importants. Ce rapport donne les resultats de cette etude appliquee au cuivre et aux laitons. Cette etude a permis de selectionner des bains de traitement efficaces dans les deux cas de contamination: plutonium et produits de fission. (auteurs)

Study of fission product {gamma} spectra in the band 2-500 keV; Etude du spectre {gamma} des produits de fission dans la bande 0-500 keV

Energy Technology Data Exchange (ETDEWEB)

Rousseau, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

In the study of the {gamma} spectrum of uranium fission products, particular attention has been given in this note to the part of the spectrum ranging between 0 and 500 keV after a given pile operating programme and the evolution of this spectrum with time after a pile shutdown has been followed. The study be related to the fission products which appear in the pile as a whole or on those produced in a uranium sample assumed to have been placed in the pile. The latter case has been envisaged here. The spectrum determination is based partly on theory and partly on experiment. The pile operating conditions are different in the two cases, which widens the range of validity of the spectra traced here. (author) [French] Dans l'etude du spectre {gamma} des produits de fission de l'uranium, on s'est plus particulierement interesse dans la presente note a determiner la partie du spectre qui s'etend entre 0 et 500 keV, au bout d'un fonctionnement donne de pile, et a suivre l'evolution de ce spectre dans le temps apres un arret de pile. L'etude peut porter sur les produits de fission apparus dans toute la pile ou sur ceux apparus dans un echantillon d'uranium suppose place en pile. C'est ce dernier cas que nous avons envisage. La determination du spectre s'appuie sur une partie theorique et sur une partie experimentale. Les fonctionnements de pile choisis sont differents dans les deux cas, ce qui permet d'etendre la gamme de validite des spectres traces ici. (auteur)

Study of fission product {gamma} spectra in the band 2-500 keV; Etude du spectre {gamma} des produits de fission dans la bande 0-500 keV

Energy Technology Data Exchange (ETDEWEB)

Rousseau, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

In the study of the {gamma} spectrum of uranium fission products, particular attention has been given in this note to the part of the spectrum ranging between 0 and 500 keV after a given pile operating programme and the evolution of this spectrum with time after a pile shutdown has been followed. The study be related to the fission products which appear in the pile as a whole or on those produced in a uranium sample assumed to have been placed in the pile. The latter case has been envisaged here. The spectrum determination is based partly on theory and partly on experiment. The pile operating conditions are different in the two cases, which widens the range of validity of the spectra traced here. (author) [French] Dans l'etude du spectre {gamma} des produits de fission de l'uranium, on s'est plus particulierement interesse dans la presente note a determiner la partie du spectre qui s'etend entre 0 et 500 keV, au bout d'un fonctionnement donne de pile, et a suivre l'evolution de ce spectre dans le temps apres un arret de pile. L'etude peut porter sur les produits de fission apparus dans toute la pile ou sur ceux apparus dans un echantillon d'uranium suppose place en pile. C'est ce dernier cas que nous avons envisage. La determination du spectre s'appuie sur une partie theorique et sur une partie experimentale. Les fonctionnements de pile choisis sont differents dans les deux cas, ce qui permet d'etendre la gamme de validite des spectres traces ici. (auteur)

Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

Energy Technology Data Exchange (ETDEWEB)

Amblard, J.C. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-07-15

The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

Genetic cytological and biochemical study of a tomato chlorophyll mutant of the xanthic type, obtained by irradiation of the seeds; Etude genetique, cytologique et biochimique d'un mutant chlorophyllien de tomate du type xantha, obtenu par irradiation de graines

Energy Technology Data Exchange (ETDEWEB)

Lefort, M; Duranton, J; Galmiche, J M; Roux, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Irradiation of Lycopersicum aesculantum seeds with increasing doses of X-rays and thermal neutrons leads to the appearance of chlorophyll mutations in the descendants of the irradiated seeds. A genetic study of one of these mutants of the xanthic type showed that it was a recessive mutant with typical mono-genetic separation, while the cytological study demonstrated that the differentiation of the plast stopped at the stage of elementary lamella. Finally it is shown that in the light, the mutation brings about a very large deviation of the carbon metabolism towards the synthesis of amino acids and proteins, at the expense of that of glucosides. (author) [French] L'irradiation de graines de Lycopersicum Aesculantum avec des doses croissantes de rayons X et de neutrons thermiques entraine l'apparition de mutations chlorophylliennes dans la descendance des graines irradiees. L'etude genetique d'un de ces mutants du type xantha a montre qu'il s'agissait d'un mutant recessif a disjonction monogenique typique, tandis que l'etude cytologique a revele que la differentiation du plaste s'arretait au stade de lamelles elementaires. Il est apparu enfin qu'a la lumiere la mutation entrainait une deviation tres importante du metabolisme du carbone vers la synthese des acides amines et des proteines, au detriment de celle des glucides. (auteur)

Thermodynamic properties of beryllium hydroxide; Proprietes thermodynamiques de l'hydroxyde de beryllium. Etude du systeme BeO - H{sub 2}O - BE(OH){sub 2}

Energy Technology Data Exchange (ETDEWEB)

Baur, A; Lecocq, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The study of the hydro-thermal decomposition of beryllium hydroxide has made it possible to determine the free energy of formation and the entropy. The results obtained are in good agreement with the theoretical values calculated from the solubility product of this substance. They give furthermore the possibility of acquiring a better understanding of the BeO-H{sub 2}O-Be (OH){sub 2} system between 20 and 1500 C. (authors) [French] L'etude de la decomposition hydrothermale de l'hydroxyde de beryllium a permis de determiner l'energie libre de formation et l'entropie. Les resultats obtenus sont en bon accord avec les valeurs theoriques calculees a partir du produit de solubilite de ce corps. Ils donnent en outre la possibilite d'acceder a une meilleure comprehension du systeme BeO - H{sub 2}O - Be(OH){sub 2}, entre 20 C et 1500 C. (auteurs)

Systematic study of plasma and serum proteins in the pig; Etude systematique des proteines plasmatiques et seriques du porc

Energy Technology Data Exchange (ETDEWEB)

Daburon, F; Nizza, P; Hatchikian, C; Schmidt, J -P [Commissariat a l' Energie Atomique (France)

1966-07-01

This work has been carried out in the framework of the determination of the physiological constants of a normal pig. The aim was to study the serum and plasma proteins of this animal species, the ultimate object being to discover whether the qualitative and quantitative changes in these proteins can make a significant contribution to the establishment of a biological dosimetry for irradiated pigs. The serum and plasma from a normal pig were analyzed first by various simple electrophoretic methods and then by immuno-electrophoresis. As a result of the particular characteristics of pig serum we have gradually been led to make numerous modifications to the techniques used for human serums or for those of small laboratory animals. Much careful work and patience were required in order to obtain reproducible results. (authors) [French] Ce travail se situe dans le cadre de la determination des constantes physiologiques du porc normal. il s'agissait de proceder a l'etude des proteines seriques et plasmatiques de cette espece animale, le but ulterieur etant de savoir si les modifications qualitatives et quantitatives de ces proteines pourront representer une contribution valable a l'etablissement d'une dosimetrie biologique chez le porc irradie. Le serum et le plasma du porc normal ont ete analyses d'abord par diverses methodes electrophoretiques simples puis par immunoelectrophorese. Les caracteristiques particulieres du serum de porc nous ont conduits a apporter progressivement de nombreuses modifications aux techniques utilisees pour des serums humains ou de petits animaux de laboratoire. L'obtention de resultats reproductible a exige beaucoup de patience et de minutie. (auteurs)

Spectrophotometric study of the complexes of cerium and uranides with diethylenetetraaminepentaacetic acid (DTPA); Contribution a l'etude de la complexation du cerium et des uranides par l'acide diethylenetetraminepentaacetique (DTPA)

Energy Technology Data Exchange (ETDEWEB)

Hafez, M B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-03-01

A spectrophotometric determination was made of the complexes of cerium and uranides in their different degrees of oxidation with diethylenetriaminepentaacetic acid (DTPA). Two physico-chemical states, the ionic and hydrolysis ones, were considered. In the former case, we studied the influence of the pH on the formation of the complex, and whenever the complexes were stable, we determined the molecular ratio and calculated their stability constants. In the latter case, we studied the conditions of solubilization of the precipitate by formation of complexes soluble in water as a function of pH, age of the precipitate and time of precipitate-chelate contact. (authors) [French] Etude spectrophotometrique de la complexation du cerium et des uranides (uranium, neptunium, plutonium et americium) dans leurs differents etats d'oxydation par l'acide diethylenetriaminepentaacetique (DTPA). Deux etats physicochimiques ont retenu notre attention, l'etat ionique et l'etat precipite d'hydrolyse. Dans le premier cas, nous avons etudie l'influence du pH sur la formation du complexe, et dans tous les cas ou le complexe est stable, nous avons determine le rapport moleculaire (5) [element]/[chelatant] du complexe forme et nous avons calcule leurs constantes de stabilite. Dans le deuxieme cas, l'etat de precipite d'hydrolyse, nous avons etudie les conditions de solubilisation du precipite, par formation du complexe, en fonction du pH, de l'age du precipite et du temps de contact precipite - chelatant. (auteurs)

Contribution to research on the metabolism of fission product. Studies on the physico-chemical state and the metabolic fate of radio-cerium solution; Contribution a l'etude du metabolisme des produits de fission. Recherches sur l'etat physico-chimique et le devenir metabolique des solutions de radiocerium

Energy Technology Data Exchange (ETDEWEB)

Aeberhardt, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

This paper describes a study of the physico-chemical state of radio-cerium in dilute solutions on the tracer scale, as a function of the pH of the solution. The way in which this radioelement is transported in the blood is studied in vitro and in vivo, with reference to the ionic or colloidal state of the radio-cerium used. The distribution of cerium amongst the various components of the blood is studied by a new method of blood fractionation and by paper electrophoresis. Evidence of a cerium globulin connection is shown in the case of ionic cerium. A study of the initial distribution of radio-cerium in rats, after intravenous administration of ionic or colloidal solutions, shows considerable differences according to the physico-chemical state of the cerium injected. (author) [French] Ce travail presente une etude de l'etat physico-chimique du radiocerium en solutions diluees a l'echelle des indicateurs, en fonction du pH de la solution. En fonction de l'etat ionique ou colloidal du radiocerium utilise, le mode de transport de ce radioelement dans le sang est etudie in vitro et in vivo. La distribution du cerium entre les differents constituants du sang est etudiee par une methode nouvelle de fractionnement du sang et par electrophorese sur papier. L'existence d'une liaison cerium-globuline est mise en evidence dans le cas du cerium ionique. L'etude de la distribution initiale du radiocerium, chez le rat apres administration par voie veineuse de solutions ionique ou colloidale, montre des differences importantes en fonction de l'etat physico-chimique du cerium injecte. (auteur)

Contribution to the study of the stability of water-cooled reactors; Contribution a l'etude de la stabilite des reacteurs refroidis par de l'eau

Energy Technology Data Exchange (ETDEWEB)

Coudert, C [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1969-06-01

This work is devoted to the study of the stability of reactors cooled by water subjected only to natural convection. It is made up of two parts, a theoretical study and experimental work, each of these parts being devoted to a consideration of linear and non-linear conditions: - calculation of the transfer function of the reactor using neutronic and hydrodynamic linear equations with the determination of the instability threshold; - demonstration of the existence of the limiting oscillation cycle in the case of a linear feedback using MALKIN'S method; - measurement and interpretation of the reactor's transfer functions and of the hydrodynamic transfer functions; and - analysis of the noise due to boiling. (author) [French] Dans ce travail on etudie la stabilite des piles refroidies par de l'eau circulant en convection naturelle. Cette etude se divise en deux parties: un travail theorique et un travail experimental, chacune de ces parties comportant une etude lineaire et une etude non-lineaire: - calcul de la fonction de transfert du reacteur a partir des equations lineaires de la neutronique et de l'hydrodynamique avec determination du seuil d'instabilite; - demonstration de l'existence du cycle limite des oscillations dans le cas d'une retroaction lineaire en utilisant la methode de MALKIN; - mesure et interpretation de la fonction de transfert du reacteur et des fonctions de transfert hydrodynamiques; et - analyse du bruit d'ebullition. (auteur)

Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

Science.gov (United States)

Savard, Stephane

Les premieres etudes d'antennes a base de supraconducteurs a haute temperature critique emettant une impulsion electromagnetique dont le contenu en frequence se situe dans le domaine terahertz remontent a 1996. Une antenne supraconductrice est formee d'un micro-pont d'une couche mince supraconductrice sur lequel un courant continu est applique. Un faisceau laser dans le visible est focalise sur le micro-pont et place le supraconducteur dans un etat hors-equilibre ou des paires sont brisees. Grace a la relaxation des quasiparticules en surplus et eventuellement de la reformation des paires supraconductrices, nous pouvons etudier la nature de la supraconductivite. L'analyse de la cinetique temporelle du champ electromagnetique emis par une telle antenne terahertz supraconductrice s'est averee utile pour decrire qualitativement les caracteristiques de celle-ci en fonction des parametres d'operation tels que le courant applique, la temperature et la puissance d'excitation. La comprehension de l'etat hors-equilibre est la cle pour comprendre le fonctionnement des antennes terahertz supraconductrices a haute temperature critique. Dans le but de comprendre ultimement cet etat hors-equilibre, nous avions besoin d'une methode et d'un modele pour extraire de facon plus systematique les proprietes intrinseques du materiau qui compose l'antenne terahertz a partir des caracteristiques d'emission de celle-ci. Nous avons developpe une procedure pour calibrer le spectrometre dans le domaine temporel en utilisant des antennes terahertz de GaAs bombarde aux protons H+ comme emetteur et detecteur. Une fois le montage calibre, nous y avons insere une antenne emettrice dipolaire de YBa 2Cu3O7-delta . Un modele avec des fonctions exponentielles de montee et de descente du signal est utilise pour lisser le spectre du champ electromagnetique de l'antenne de YBa 2Cu3O7-delta, ce qui nous permet d'extraire les proprietes intrinseques de ce dernier. Pour confirmer la validite du modele

Nuclear study of Melusine; Etude nucleaire de Melusine

Energy Technology Data Exchange (ETDEWEB)

Cherot, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

In this report are reviewed - with respect to starting of experiments - the main nuclear characteristics of a 20 per cent enriched uranium lattice, with light water as moderator and reflector. The reactor is to operate at 1 MW. 1) Study of various critical masses. 2) Control. Effectiveness of cadmium. Control rods and of a stainless steel regulating rod. 3) Study of the effect on reactivity of disturbances in the core center. 4) Study of xenon and samarium poisoning. 5) Temperature factor. 6) Heat exchanges in a fuel element. (author) [French] On etudie, dans ce rapport, les principales proprietes nucleaires d'un reseau a uranium enrichi (20 pour cent), dont le moderateur et le reflecteur sont l'eau legere en vue des experiences de demarrage. Ce reacteur devra fonctionner a 1 MW. 1) Etude de diverses masses critiques. 2) Controle. Efficacite des barres de controle en cadmium et d'une barre de reglage en acier inoxydable. 3) Etude de l'effet sur la reactivite de perturbation au centre du coeur. 4) Etude de l'empoisonnement xenon et samarium. 5) Coefficient de temperature. 6) Echanges thermiques dans un element. (auteur)

Etude de l'origine du citronellol dans les vins

Directory of Open Access Journals (Sweden)

Isabelle Dugelay

1992-09-01

Full Text Available La formation du citronellol à partir du géraniol et du nérol au cours de la fermentation de moûts synthétiques et naturels de raisin par différentes souches de levures a été étudiée. Le géraniol et le nérol sont transformés en citronellol par la levure, ceci de façon plus marquée avec le géraniol. La quantité de citronellol formé dépend de la souche de levure utilisée. D'autres monoterpènes, comme les acétates de géranyle et de néryle et l'α-terpinéol, sont aussi formés au cours de la fermentation. La préparation enzymatique utilisée n'a pas montré d'activités réductases vis-à-vis du géraniol et du nérol pour former du citronellol.

Beach sediments drift study by means of radioactive tracers; L'etude du transport littoral par la methode des traceurs radioactifs

Energy Technology Data Exchange (ETDEWEB)

Hours, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires; Jaffry, P [Electricite de France (EDF), 78 - Chatou (France). Lab. National d' Hydraulique

1959-07-01

The present state of the sediments drift studies by means of radioactive tracers is exposed. Various processes of labelling, immersion and detection, used in France and other countries, are reviewed. A more extended analysis of some aspects of the problem by the same authors can be found in 'La Houille Blanche', number 3, may-june 1959 (Rapport C.E.A. number 1269). (author) [French] L'etude du transport littoral des sediments et galets par la methode des traceurs radioactifs est en plein developpement. Le present rapport precise l'etat actuel de la question. Les techniques de marquage, d'immersion et de detection utilisees en France et a l'etranger sont decrites; une analyse plus detaillee de certains aspects de la question est presentee par les memes auteurs dans 'La Houille Blanche', numero 3, mai-juin 1959 (Rapport C.E.A. numero 1269). (auteur)

Systematic study of plasma and serum proteins in the pig; Etude systematique des proteines plasmatiques et seriques du porc

Energy Technology Data Exchange (ETDEWEB)

Daburon, F.; Nizza, P.; Hatchikian, C.; Schmidt, J.-P. [Commissariat a l' Energie Atomique (France)

1966-07-01

This work has been carried out in the framework of the determination of the physiological constants of a normal pig. The aim was to study the serum and plasma proteins of this animal species, the ultimate object being to discover whether the qualitative and quantitative changes in these proteins can make a significant contribution to the establishment of a biological dosimetry for irradiated pigs. The serum and plasma from a normal pig were analyzed first by various simple electrophoretic methods and then by immuno-electrophoresis. As a result of the particular characteristics of pig serum we have gradually been led to make numerous modifications to the techniques used for human serums or for those of small laboratory animals. Much careful work and patience were required in order to obtain reproducible results. (authors) [French] Ce travail se situe dans le cadre de la determination des constantes physiologiques du porc normal. il s'agissait de proceder a l'etude des proteines seriques et plasmatiques de cette espece animale, le but ulterieur etant de savoir si les modifications qualitatives et quantitatives de ces proteines pourront representer une contribution valable a l'etablissement d'une dosimetrie biologique chez le porc irradie. Le serum et le plasma du porc normal ont ete analyses d'abord par diverses methodes electrophoretiques simples puis par immunoelectrophorese. Les caracteristiques particulieres du serum de porc nous ont conduits a apporter progressivement de nombreuses modifications aux techniques utilisees pour des serums humains ou de petits animaux de laboratoire. L'obtention de resultats reproductible a exige beaucoup de patience et de minutie. (auteurs)

Contribution to the study of the sintering of finely divided alumina; Contribution a l'etude du frittage de l'alumine finement divisee

Energy Technology Data Exchange (ETDEWEB)

Vergnon, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-07-01

Two crystalline forms of alumina, delta and alpha, were used to prepare compacts. The shrinkage of these compacts was investigated at different temperatures. The samples of alumina are composed of non porous, spherical particles, of a very high purity. Their mean diameter varies between 160 and 1 200 Angstrom for the delta alumina samples and between 400 and 1 200 Angstrom for the alpha alumina samples. The shrinkage of compacts, heated at a linearly increasing temperature (300 deg. C/h, slow heating) was studied in a A.D.A.M.E.L. dilatometer, modified to be used as a retractometer. The kinetics of the isothermal shrinkage of compacts after their rapid introduction (a few seconds, flash heating) in the high temperature zone of the furnace were followed with a photographic technique. It is shown that the heating rate influences the shrinkage of the compacts when they are heated at temperatures over 1 000 deg. C. The kinetics of the isothermal shrinkage, at temperature between 1000 deg. C and 1600 deg. C were thoroughly studied. Values of the apparent activation energy for the different classes of compacts are given. An interpretation of the results is proposed. It takes into account two different but interdependent mechanisms of sintering: the disappearance of porosity as a result of vacancy diffusion and the grain growth as a result of boundary migration. (author) [French] Deux formes cristallines de l'alumine, la forme delta et la forme alpha, ont ete utilisees pour confectionner des comprimes en vue d'une etude cinetique du frittage. Ces alumines d'une tres grande purete sont constituees de particules spheriques non poreuses, sensiblement homodispersees dont le diametre moyen varie entre 160 et 1200 Angstrom pour les echantillons de l'alumine delta et entre 400 et 1200 Angstrom pour ceux de l'alumine alpha. Le retrait des comprimes chauffes a temperature linerairement croissante (300 deg. C/h: chauffage lent) a ete suivi a l'aide du

Contribution to the study of the sintering of ex-carbonyl iron in the {alpha} and {gamma} phases using the micro-fractographic technique; Contribution a l'etude du frittage du fer ex-carbonyle en phases {alpha} et {gamma} par examen des surfaces de rupture au microscope electronique

Energy Technology Data Exchange (ETDEWEB)

Oxley Gaborit de Montjou, M.Th. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-07-01

The micro-fractographic study of the sintering of ex-carbonyl iron has shown or confirmed a number of phenomena of which the principal are as followed: Sintering in the a phase: -) existence of two stages of sintering differentiated by the type of rupture (inter or trans-crystalline); -) marked influence of the content of oxygen in the atmosphere and in the initial compressed sample on the speed of sintering; -) formation of striations on the grain-boundary surfaces and on the inner surface of pores caused by the presence of oxygen. Sintering in the {gamma} phase: -) a pronounced decrease in the speed of sintering: the grains in the initial powder remain in the granular state within the final {alpha} crystal in the iron sintered in the lower {gamma} range even after several hours of sintering; -) this granular structure can be eliminated by intermediate compression thus enabling the sintering process to proceed. A considerable decrease in the speed of sintering if the A{sub 3} point is passed one or more times in the {alpha} range sintering. A high speed sintering if the treatment in the {gamma} range is carried out at or above 1300 C. The results of this study agree with micrographic investigation as well as with dilatometric measurements and known auto-diffusion coefficients. (author) [French] L'etude microfractographique du frittage du fer ex-carbonyle a permis de mettre en evidence ou verifier plusieurs phenomenes dont les principaux sont les suivants: Pour le frittoge en phase {alpha}: -) existence de deux stades de frittage differencies par le type de rupture (inter et transcristalline); -) importance de la teneur en oxygene dans l'atmosphere et dans le comprime initial sur la vitesse de frittage; -) formation de stries dues a la presence d'oxygene sur les plans de joints et a l'interieur des pores. Pour le frittage en phase {gamma}: -) un ralentissement tres prononce de la cinetique du frittage: les granules de la poudre initiale demeurent a l'etat de

Contribution to the study of plasmatic fibrinogen and serum albumin: effects of irradiation; Contribution a l'etude du fibrinogene et de la serum-albumine plasmatiques - effets de l'irradiation

Energy Technology Data Exchange (ETDEWEB)

Suscillon, M [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

1967-07-01

The author studies the modifications of properties and structure of serum albumin and fibrinogen solution when subjected to radiation of low energy (X rays). On the other hand, two original techniques are exposed: 1. Amperometric determination of fibrin stabilizing factor or factor XIII of hemostasis. 2. Spectrophotometric study of fibrin formation kinetics. Then showing off and quantitative determination of platelets fibrinogen is exposed. (author) [French] L'auteur etudie les modifications des proprietes et de la structure des molecules de serum-albumine et de fibrinogene en solution soumise a un flux de RX de basse energie. D'autre part deux techniques originales sont exposees : 1. Dosage amperometrique du facteur stabilisant de la fibrine. 2. Etude spectrophotometrique de la cinetique de la fibro-formation. Enfin une mise en evidence et un dosage du fibrinogene plaquettaire sont presentes. (auteur)

Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

Science.gov (United States)

El Mansouri, Souleimane

Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

Concerning the study of the irreversible magnetic behaviour of superconductivity; Contribution a l'etude du comportement magnetique irreversible des supraconducteurs

Energy Technology Data Exchange (ETDEWEB)

Kuhn, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-03-01

The influence of the presence of extended lattice defects on the magnetic behaviour has been studied for the case of type I superconductors, such as Re and Ta, and in a more quantitative manner for the type II superconductor niobium. In this case, measurements of the thermal conductivity have given an estimate of the relative concentration of lattice defects in each specimen. These measurements show that the larger the number of lattice defects, the more irreversible becomes the magnetization curve, and the larger becomes the values of the critical current, which is related by a simple model to the magnetization values. Finally, a study by transmission electron microscopy has confirmed on the one hand the diversity of the extended lattice defects and on the other hand has allowed the formulation of several hypothesis on their respective influence. [French] L'influence de la presence de defauts etendus sur le comportement magnetique a ete etudie pour des supraconducteurs de premiere espece, tels que le rhenium et le tantale, et plus quantitativement pour un supraconducteur de deuxieme espece, le niobium. Dans ce cas, des mesures de conductibilite thermique ont permis d'estimer la concentration relative des defauts du reseau dans chaque echantillon. Ces mesures montrent que plus les defauts du reseau sont nombreux, plus la courbe d'aimantation est irreversible, et plus les valeurs du courant critique, reliees par un modele simple aux valeurs de l'aimantation, sont elevees. Enfin une etude par microscopie electronique en transmission - a permis d'une part de constater la diversite des defauts etendus et d'autre part de formuler quelques hypotheses sur leurs influences respectives.

A comparative study of the {sup 90}Sr/Ca ratio in human diet and bone tissue; Etude comparee chez l'homme du rapport {sup 90}Sr/Ca dans l'alimentation et le tissu osseux

Energy Technology Data Exchange (ETDEWEB)

Coulon, R; Madelmont, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-07-01

A comparative study of both the evolution of strontium-90 content in the bones of individuals of different ages for the period 1962-1967 as related to calcium, and the corresponding diets allowed to establish the relationship between food contribution and the resulting bone burden. The study is mainly devoted to the group of adults for which a mathematical expression is proposed which allows for the exchangeable form of a skeletal calcium fraction turned over in less than a year from the dietary calcium, and the stabilized form constituting the larger part of bone tissue characterized by a slow turnover. Both the amount of the exchangeable fraction and the turnover rate of the stabilized fraction are determined for vertebrae and ribs. At birth, bone levels indicate that the calcium used for skeleton modelling during foetal life originates from both maternal diet and bone tissue and a value is given, to their relative significance. There appears a good relationship between bone levels in infants from 6 months to 1 year of age and their diets. The physiological parameters particular to this age are quantified. (authors. [French] L'etude comparee de l'evolution de la teneur en strontium 90 rapportee au calcium, mesuree dans les os d'individus a differents ages durant la periode 1962-1967 et celle du regime alimentaire correspondant, a permis d'etablir la relation qui existe entre l'apport du a l'alimentation et la charge osseuse qui en resulte. L'essentiel de l'etude est consacre au cas des adultes. Pour ce groupe la formulation mathematique proposee tient compte de la presence de la forme echangeable d'une fraction du calcium osseux, renouvelee en moins d'un an a partir du calcium alimentaire, et de la forme stabilisee, constituant la majeure partie du tissu osseux, caracterisee par un renouvellement lent. L'importance de la fraction echangeable, ainsi que le taux de renouvellement de la fraction stabilisee sont etablis pour les vertebres et les cotes. La

Contribution to the study of plasmatic fibrinogen and serum albumin: effects of irradiation; Contribution a l'etude du fibrinogene et de la serum-albumine plasmatiques - effets de l'irradiation

Energy Technology Data Exchange (ETDEWEB)

Suscillon, M. [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

1967-07-01

The author studies the modifications of properties and structure of serum albumin and fibrinogen solution when subjected to radiation of low energy (X rays). On the other hand, two original techniques are exposed: 1. Amperometric determination of fibrin stabilizing factor or factor XIII of hemostasis. 2. Spectrophotometric study of fibrin formation kinetics. Then showing off and quantitative determination of platelets fibrinogen is exposed. (author) [French] L'auteur etudie les modifications des proprietes et de la structure des molecules de serum-albumine et de fibrinogene en solution soumise a un flux de RX de basse energie. D'autre part deux techniques originales sont exposees : 1. Dosage amperometrique du facteur stabilisant de la fibrine. 2. Etude spectrophotometrique de la cinetique de la fibro-formation. Enfin une mise en evidence et un dosage du fibrinogene plaquettaire sont presentes. (auteur)

The study of the distribution of Ca{sup 45} with time in the newborn rat by the autoradiography method at - 195 deg; Etude de la distribution du {sup 45}Ca en fonction du temps chez le rat nouveau-ne par la methode d'autoradiographie a -195 deg

Energy Technology Data Exchange (ETDEWEB)

Kellershohn, C; Pellerin, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1961-07-01

Ca{sup 45} metabolism has been studied as a function of time by autoradiography at -195 deg. C in the new-born rat after sub-epidermal dorsal injected of 20 micro-curies per animal. This study confirms: 1) The existence of a rapidly exchangeable calcium bone fraction; 2) A considerable intestinal excretion of radio-calcium, much greater than the urinary elimination; 3) A gradual transfer of the activity for the long bones of the epiphyseal to the diaphyseal regions during growth, together with secondary modifications during ossification. (author) [French] Le metabolisme du {sup 45}Ca est etudie en fonction du temps par autoradiographie a -195 deg. C, chez le rat nouveau-ne apres injection sous-epidermique dorsale de 20 microcuries par animal. Cette etude confirme: 1) l'existence d'une fraction calcique osseuse rapidement echangeable; 2) une excretion intestinale considerable du radiocalcium, tres superieure a l'elimination urinaire; 3) un transfert progressif de l'activite pour les os longs des regions epiphysaires aux regions diaphysaires au cours de la croissance, ainsi que les remaniements secondaires au cours de l'ossification. (auteur)

Etude Du Comportement Dynamique D'un Systeme De Pompage ...

African Journals Online (AJOL)

SIMULINK le comportement dynamique d'un système de pompage composé d'un générateur photovoltaïque, d'un onduleur, d'un moteur à induction et d'une pompe centrifuge. Le modèle global du système est bouclé : la sortie tension du GPV est ...

Development and testing of the EDF-2 reactor fuel element; Essais et mise au point de l'element combustible pour le reacteur EDF-2

Energy Technology Data Exchange (ETDEWEB)

Delpeyroux, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Furhmann, R [Societe Industrielle de Combustible Nucleaire (France)

1964-07-01

rassemble les etudes qui ont ete necessaires pour mener a bien la definition de l'element combustible EdF 2. Apres un bref rappel des caracteristiques du reacteur EdF 2 et des options preliminaires ayant permis de fixer un avant-projet d'element combustible, on aborde les etudes proprement dites: - Etudes uranium: essais de passage d'une couronne interne du tube en phase {beta}, flechage du tube sous l'action d'une force concentree, soudage des pastilles d'extremites et verification de leur etancheite. La tenue du tube a l'ecrasement et la resistance des pastilles a l'enfoncement sous l'action de la pression externe sont etudiees en detail dans un autre rapport CEA - Etudes gaine: rappel des conditions de fabrication et verification de l'etancheite de la gaine, tenue des ailettes au fluage sous l'action du courant gazeux - Etudes d'extremites: fluage en compression et soudage des bouchons a la gaine. - Etudes cartouche: determination des caracteristiques des gorges d'ancrage gaine-combustible et des conditions de gainage, verification de la tenue au cyclage thermique de l'element combustible, determination de la chute de temperature au contact gaine-combustible traitee en detail dans un autre rapport CEA, - Etudes de l'ensemble: les etudes se rapportant a la chemise de graphite, au support et aux vibrations de la cartouche ont ete traitees par le service des Etudes Mecaniques et Thermiques (Section de Mecanique), Dans ce domaine, la Section d'Etude d'Elements Combustibles a etudie la tenue des centreurs sous l'action du courant gazeux. L'aboutissement des etudes est constitue par le dessin de l'element combustible, le schema de fabrication et les normes de fabrication. La validite de l'ensemble de ces essais hors pile sera confirmee par des assais en pile qui sont en cours et par l'irradiation des elements dans le reacteur EdF 2 lui-meme. En conclusion, on donne l'orientation des etudes pour l'amelioration de l'element combustible et la definition d'un element combustible

Connaissances et attitudes des manipulateurs radio du Togo sur l ...

African Journals Online (AJOL)

Objectif : Evaluer les connaissances et les attitudes des manipulateurs togolais sur l'irradiation médicale des grossesses. Matériels et Méthode : Etude transversale menée en Avril 2011 chez 72 manipulateurs de radiologie des structures sanitaires publiques et privées du Togo. Résultats : Le quart des manipulateurs ...

Monte-Carlo method for studying the slowing down of neutrons in a thin plate of hydrogenated matter; Methode de Monte-Carlo pour l'etude du ralentissement des neutrons dans une plaque mince de matiere hydrogenee

Energy Technology Data Exchange (ETDEWEB)

Ribon, P; Michaudon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The studies of interaction of slow neutrons with atomic nuclei by means of the time of flight methods are made with a pulsed neutron source with a broad energy spectrum. The measurement accuracy needs a high intensity and an output time as short as possible and well defined. If the neutrons source is a target bombarded by the beam of a pulsed accelerator, it is usually required to slow down the neutrons to obtain a sufficient intensity at low energies. The purpose of the Monte-Carlo method which is described in this paper is to study the slowing down properties, mainly the intensity and the output time distribution of the slowed-down neutrons. The choice of the method and parameters studied is explained as well as the principles, some calculations and the program organization. A few results given as examples were obtained in the line of this program, the limits of which are principally due to simplifying physical hypotheses. (author) [French] l'etude de l'interaction des neutrons lents avec les noyaux atomiques par la methode du temps de vol s'effectue avec une source pulsee de neutrons dont le spectre en energie est assez etendu. La precision des mesures demande que la source soit intense et que la duree d'emission des neutrons soit breve et bien definie. Si la source est une cible bombardee par le faisceau de particules d'un accelerateur pulse, il est generalement indispensable de ralentir les neutrons pour avoir une intensite suffisante a basse energie. Nous presentons ici une methode de Monte-Carlo pour l'etude detaillee de ce ralentissement, notamment l'intensite et la distribution des temps de sortie des neutrons ralentis. Cette presentation comprend: la justification du choix de la methode de Monte-Carlo, les principes generaux, les differentes etapes du calcul et du programme ecrit pour le calculateur electronique IBM 7090. Nous indiquons aussi les restrictions qui sont apportees au domaine d'application de ce programme et qui proviennent surtout des

Syntheses and study of pyrrolidinic nitroxide free radicals. Preparation of a nitroxide-type stable bi-radical; Synthese et etudes de radicaux libres nitroxydes pyrrolidiniques. Preparation d'un biradical stable du type nitroxyde

Energy Technology Data Exchange (ETDEWEB)

Dupeyre, R M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires, Laboratoire de chimie organique physique

1967-12-01

Syntheses and study of pyrrolidinic nitroxide free radicals: These radicals are obtained by oxidation, with hydrogen peroxide, of pyrrolidinic amines prepared from triacetonamine by ring contraction. The U. V,, I. R, and E.P.R. spectral characteristics have been determined. The oxidation of these amines with hydrogen peroxide has led also to rupture of the pentagonal ring; some of the decomposition products have been identified. The high chemical stability of the nitroxide group has made it possible to synthesize and study a stable bi-radical. (author) [French] Syntheses et etudes de radicaux libres nitroxydes pyrrolidiniques: Ces radicaux sont obtenus par oxydation l'eau oxygenee d'amines pyrrolidiniques preparees a partir de la triacetonamine par contraction de cycle. Les caracteristiques spectroscopiques ultra-violettes, infra-rouge et resonance paramagnetique sont determinees. Cependant, 1'oxydation de ces amines a l'eau oxygenee a entraine la coupure du cycle pentagonal et identification de certaines substances de decomposition obtenues. La grande stabilite chimique de groupement nitroxyde a permis la synthese et l'etude d'un biradical stable. (auteur)

Activation and transfer of sulfate in biological systems (1960); Activation biologique du sulfate et son transfert (1960)

Energy Technology Data Exchange (ETDEWEB)

Chapeville, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

It examines in this review the successive stages of active sulfate formation and its role in biological synthesis of sulfuric esters. The possible role of active sulfate as intermediary in sulfate reduction is also discussed. (author) [French] On examine dans cette etude les stades successifs de la mise en evidence du sulfate actif, son role dans la formation des esters sulfuriques de natures diverses, ainsi que sa participation eventuelle comme intermediaire au cours de la reduction du sulfate. On decrit aussi un procede de preparation du systeme biologique, generateur du sulfate actif et une methode de synthese chimique. (auteur)

Hyperfine coupling in gadolinium-praseodymium alloys by specific heat measurements; Etude du couplage hyperfin dans les alliages gadolinium-praseodyme par mesures de chaleur specifique

Energy Technology Data Exchange (ETDEWEB)

Michel, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-12-01

We have studied the hyperfine coupling in gadolinium-praseodymium alloys by specific heat measurements down to 0.3 K. In the first part we describe the apparatus used to perform our measurements. The second part is devoted to some theoretical considerations. We have studied in detail the case of praseodymium which is an exception in the rare earth series. The third part shows the results we have obtained. (author) [French] Nous avons etudie le couplage hyperfin d'alliages de gadolinium-praseodyme par des mesures de chaleur specifique jusqu'a 0.3 K. Dans la premiere partie de cette etude nous decrivons le dispositif experimental. La deuxieme partie est consacree a des considerations theoriques. Nous avons etudie en detail le cas du praseodyme qui est une exception dans la serie des terres rares. La troisieme partie est consacree aux resultats experimentaux. (auteur)

Neutronic study of the two french heavy water reactors; Etude neutronique des deux piles francaises a eau lourde

Energy Technology Data Exchange (ETDEWEB)

Horowitz, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-07-01

The two french reactors - the reactor of Chatillon, named Zoe, and the reactor of Saclay - P2 - were the object of detailed neutronic studies which the main ideas are exposed in this report. These studies were mostly done by the Department of the Reactor Studies (D.E.P.). We have thus studied the distribution of neutronic fluxes; the factors influencing reactivity; the link between reactivity and divergence with the formula of Nordheim; the mean time life of neutrons; neutron spectra s of P2; the xenon effect; or the effect of the different adjustments of the plates and controls bar. (M.B.) [French] Les deux reacteurs francais - la pile de Chatillon, appelee ZOE, et la pile de Saclay, designee dans la suite par P2 - ont fait l'objet d'etudes neutroniques detaillees dont les principales sont exposees dans ce rapport. Ces etudes ont ete pour la plupart effectuees dans le cadre du Departement des Etudes de Piles (D.E.P.). Nous avons ainsi entre autre etudie la distribution du flux neutronique; les facteurs influencants la reactivite; le lien entre reactivite et divergence par la formule de Nordheim; le temps de vie moyen des neutrons; les spectres de neutrons de P2; l'effet xenon; ou encore l'effet des differents reglages des plaques et barres de controles. (M.B.)

Study of the solubility of plutonyl nitrate with a view to its extraction by a solvent; Etude de la solubilite du nitrate de plutonyle en vue de son extraction par solvant

Energy Technology Data Exchange (ETDEWEB)

Vergnaud, G [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

1965-09-01

The research covers the determination of the partition coefficient of plutonyl nitrate and their application to the industrial treatment of plutonium. The solvent used is a tri-n-butyl phosphate solution diluted to 30 per cent in dodecane. The parameters which have been studied and which can affect the extraction of the plutonyl nitrate are: the plutonyl nitrate concentration; the nitric acid concentration; the uranyl nitrate concentration; the tetravalent plutonium nitrate concentration. The industrial application has been studied using a battery of mixer-separators. The operational conditions are defined in the case of a conventional plutonium separation plant. The results obtained, for a higher plutonyl nitrate concentration than that actually planned, are satisfactory and encouraging as far as the operation is concerned. Only the presence of polymerized tetravalent plutonium can adversely affect the satisfactory extraction of the plutonium. (author) [French] L'etude porte sur les coefficients de partage du nitrate de plutonyle et leur application a l'elaboration industrielle du plutonium. Le solvant utilise est une solution de phosphate de tri-n-butyle, dilue a 30 pour cent dans le dodecane. Les parametres etudies et pouvant influencer l'extraction du nitrate de plutonyle, par ce solvant, sont: concentration du nitrate de plutonyle; concentration de l'acide nitrique; concentration du nitrate d'uranyle; concentration au nitrate de plutonium tetravalent. L'application industrielle est etudiee au moyen d'une batterie de melangeurs-decanteurs. Les conditions operatoires sont definies d'apres un schema classique d'usine de separation de plutonium. Les resultats obtenus, pour une concentration du nitrate de plutonyle superieure a celle reellement prevue, sont satisfaisants et encourageants pour l'exploitation. Seule, la presence de plutonium tetraralent polymerise, peut nuire a une bonne extraction du plutonium. (auteur)

Study of the solubility of plutonyl nitrate with a view to its extraction by a solvent; Etude de la solubilite du nitrate de plutonyle en vue de son extraction par solvant

Energy Technology Data Exchange (ETDEWEB)

Vergnaud, G. [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

1965-09-01

The research covers the determination of the partition coefficient of plutonyl nitrate and their application to the industrial treatment of plutonium. The solvent used is a tri-n-butyl phosphate solution diluted to 30 per cent in dodecane. The parameters which have been studied and which can affect the extraction of the plutonyl nitrate are: the plutonyl nitrate concentration; the nitric acid concentration; the uranyl nitrate concentration; the tetravalent plutonium nitrate concentration. The industrial application has been studied using a battery of mixer-separators. The operational conditions are defined in the case of a conventional plutonium separation plant. The results obtained, for a higher plutonyl nitrate concentration than that actually planned, are satisfactory and encouraging as far as the operation is concerned. Only the presence of polymerized tetravalent plutonium can adversely affect the satisfactory extraction of the plutonium. (author) [French] L'etude porte sur les coefficients de partage du nitrate de plutonyle et leur application a l'elaboration industrielle du plutonium. Le solvant utilise est une solution de phosphate de tri-n-butyle, dilue a 30 pour cent dans le dodecane. Les parametres etudies et pouvant influencer l'extraction du nitrate de plutonyle, par ce solvant, sont: concentration du nitrate de plutonyle; concentration de l'acide nitrique; concentration du nitrate d'uranyle; concentration au nitrate de plutonium tetravalent. L'application industrielle est etudiee au moyen d'une batterie de melangeurs-decanteurs. Les conditions operatoires sont definies d'apres un schema classique d'usine de separation de plutonium. Les resultats obtenus, pour une concentration du nitrate de plutonyle superieure a celle reellement prevue, sont satisfaisants et encourageants pour l'exploitation. Seule, la presence de plutonium tetraralent polymerise, peut nuire a une bonne extraction du plutonium

Study of atmospheric tritium transfers in lettuce: kinetic study, equilibrium and organic incorporation during a continuous atmospheric exposure; Etude des transferts du tritium atmospherique chez la laitue: Etude cinetique, etat d'equilibre et integration du tritum sous forme organique lors d'une exposition atmospherique continue

Energy Technology Data Exchange (ETDEWEB)

Boyer, C.

2009-11-30

This thesis has explored the mechanisms of tritium 'absorption and incorporation in a human-consumed plant, lettuce (Lactuca sativa L.), due to atmospheric exposure. Foliar uptake appears to play a key role in absorption of tritium as tissue free water tritium. Whatever the development stage and the light conditions, the specific activity in tissue free water reaches that of water vapour in air in several hours. The specific activity ratio is then about 0, 4. The time to reach equilibrium in soil is over 24 hours in most cases: the specific activity ratio ranges then 0, 01 to 0, 26. Incorporation rate of tissue free water tritium as organically-bound tritium has been estimated to 0, 13 to 0, 16 % h-l in average over the growing period of the plant, but marked variations are observed during growth. In particular, a significant increase appeared at the exponential growth stage. Deposition and diffusion of tritium in soil lead to significant OBT activities in soil. Results globally indicate equilibrium between the different environmental compartments (air, soil, plant). However, some experiments have revealed high OBT concentrations regarding atmospheric level exposure and ask for a possible phenomenon of local tritium accumulation in OBT for particular conditions of exposure. (author) [French] Ce travail de these a concerne l'etude des phenomenes d'absorption et d'incorporation sous forme organique du tritium dans un vegetal de consommation courante, la laitue (Lactuca sativa L.), en reponse a une exposition atmospherique. Il apparait que la voie foliaire joue un role primordial dans l'absorption du tritium au sein de l'eau tissulaire des plants. Quels que soient le stade de developpement des plants et les conditions d'eclairement, le temps necessaire pour atteindre l'equilibre des concentrations dans l'eau libre et dans la vapeur d'eau de l'air est de plusieurs heures; le rapport des concentrations est alors de

Study of the aqueous chemical treatment of uranium zirconium fuels; Etude du traitement chimique des combustibles uraniumzirconium par voie seche

Energy Technology Data Exchange (ETDEWEB)

Bourgeois, M; Nollet, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-07-01

A dry process has been studied for separating the uranium from the zirconium-either for recovering the enriched uranium from fuel element production waste, or with a view to treating this waste after irradiation. In this process the alloy is treated with hydrochloric acid at 400 deg. C in a fluidized corundum bed which causes the zirconium to volatilize as tetrachloride and the uranium to form the trichloride. This latter is then converted to the hexafluoride by attack with fluorure. After the laboratory tests, a first pilot plant with a capacity of 1 kg of alloy was tried out at the Fontenay-aux-Roses Nuclear Research Centre; this made it possible to fix the operational conditions for the process. An industrial scale plant was then built with the collaboration of the from Kuhlmann, and operated until a satisfactory process had been developed for treating the waste. This installation treats 3 kg/h of alloy with a yield for the hydrochloric acid of about 50 per cent and with a uranium loss in the zirconium tetrachloride of about 0.1 per cent. An active pilot plant capable of treating of treating a few kilos of irradiated alloy is now being studied. (authors) [French] On a etudie un procede de voie seche pour effectuer la separation de l'uranium et du zirconium - soit en vue de la recuperation de l'uranium enrichi contenu dans les dechets de fabrication des elements combustibles - soit en vue du traitement de ceux-ci apres irradiation. Ce procede consiste a attaquer l'alliage par l'acide chlorhydrique a 400 deg. C dans un lit fluidise de corindon, ce qui a pour effet de volatiliser le zirconium sous forme de tetrachlorure et de transformer l'uranium en trichlorure. Ce dernier est ensuite converti en hexafluorure par action du fluor. Apres des essais de laboratoire, un premier pilote a l'echelle de 1 kg d'alliage a ete experimente au Centre d'Etudes Nucleaires de Fontenay-aux-Roses et a permis de determiner les conditions operatoires du procede. En collaboration avec

Study of the form factors of the leptonic decays of the K{sub L}{sup 0}; Etude des facteurs de forme des desintegrations leptoniques du K{sub L}{sup 0}

Energy Technology Data Exchange (ETDEWEB)

Zylberajch, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-04-01

About 24 000 K{sub L}{sup 0} decays have been observed in a spark chamber spectrometer. 11 000 K{sub e3} and 7 000 K{sub {mu}}{sub 3} decays were identified and their distribution in the Dalitz plot analyzed. In the study of the K{sub {mu}}{sub 3} mode K{sub L}{sup 0} {yields} {pi}{sup {+-}} {mu}{sup {+-}} the interaction is found to be essentially a vectorial one. For the ratio {xi} = f{sub -} / f{sub +} a double solution is found: {xi} = -3.9 {+-} 0.18 and {xi} = 1.5 {+-} 0.18. The first solution is more likely. The study of the K{sub e3} mode K{sub L}{sup 0} {yields} {pi}{sup {+-}} e{sup {+-}} {nu} also confirms the vectorial nature of the interaction. It is found that: | A{sub S} /A{sub V} | < 11 per cent; | A{sub T} /A{sub V} | < 6 per cent. The q{sup 2} dependence of the form factor f{sub +} is weak: {lambda}{sub +} = 0.023 {+-} 0.012. (author) [French] Environ 24 000 desintegrations du K{sub L}{sup 0} ont ete observees et etudiees a l'aide de chambres a etincelles. 11 000 K{sub e3} et 7000 K{sub {mu}}{sub 3} ont ete identifies et etudies en analysant leur repartition dans le diagramme de Dalitz. L'etude du mode K{sub {mu}}{sub 3}: K{sub L}{sup 0} {yields} {pi}{sup {+-}} {mu}{sup {+-}} a confirme la nature essentiellement vectorielle de l'interaction. On trouve pour le rapport {xi} = f{sub -} / f{sub +} une double solution: {xi} = -3.9 {+-} 0.18 and {xi} = 1.5 {+-} 0.18. La premiere est la plus probable. L'etude du mode K{sub e3}: K{sub L}{sup 0} {yields} {pi}{sup {+-}} e{sup {+-}} {nu} confirme egalement la nature vectorielle de l'interaction avec | A{sub S} /A{sub V} | < 11 pour cent; | A{sub T} /A{sub V} | < 6 pour cent. Le facteur de forme f{sub +} varie peu avec le moment transfere. On trouve: {lambda}{sub +} = 0.023 {+-} 0.012. (auteur)

Vocabulaire du budget des Communautés européennes

CERN Document Server

European Communities. Luxembourg

1992-01-01

Sujet: Etude terminologique et phraséologique du vocabulaire du règlement financier et d'autres textes relatifs au budget des Communautés européennes. Langues: Français, anglais, allemand, italien, néerlandais, danois, espagnol, portuguais, grec. Présentation: Corpus d'un millier d'entrées en neuf langues, présentées dans l'ordre d'apparition des termes et phrases dans les textes dépouillés, avec indication des sources. Des définitions ou notes précisent certaines notions. Neuf index alphabétiques donnent accès au corpus.

Use of a new ion-detector in the study of the jet plasma injected into a pulsed magnetic mirror configuration (deca I); Utilisation d'un nouveau detecteur d'ions dans l'etude du jet de plasma injecte dans deca I

Energy Technology Data Exchange (ETDEWEB)

Renaud, C [Association Euratom-CEA Cadarache, Groupe de Recherches sur la Fusion Controlee, 13 - Saint-Paul-lez-Durance (France). Centre d' Etudes Nucleaires

1963-07-01

The study of a high sensitivity ion detector coupled to an electrostatic analyser has permitted a large investigation of the plasma jet injected into a pulsed magnetic mirror configuration. In this detector the positive ions are accelerated through a potential of 30 kV; they strike a metallic target, on which they produce secondary electrons; these, in turn, are accelerated onto a plastic scintillator. The light pulses are detected with a photomultiplier. The gain of this device is about 10{sup 7}. If we make an admission of air into the vacuum system and again we make vacuum, the gain is not modified, since no special activated surfaces are situated in the detector. (author) [French] L'etude d'un detecteur d'ions de grande sensibilite, allie a un analyseur electrostatique a permis une investigation approfondie du jet de plasma injecte dans le dispositif d'Etude de Compression Adiabatique. Dans ce detecteur, les ions positifs sont acceleres par une difference de potentiel voisine de 30 kV, ils bombardent une cible metallique et creent des electrons secondaires qui sont a leur tour acceleres vers un scintillateur plastique. Les impulsions lumineuses sont alors detectees par un photomultiplicateur. Le gain obtenu pour l'ensemble du detecteur est voisin de 10{sup 7}. Le detecteur ne possedant pas de surfaces specialement activees, les remises a l'air n'entrainent pas de variation de gain. (auteur)

Contribution to the study of hydrogenated and oxygenated impurities in liquid sodium; Contribution a l'etude des impuretees hydrogenees et oxygenees dans le sodium liquide

Energy Technology Data Exchange (ETDEWEB)

Naud, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-15

This study is made up essentially of two parts. The first is devoted to the development of dosage methods for selectively determining the oxygenated and hydrogenated impurities present in sodium, that is the oxide, the hydride and the hydroxide. The second makes use of these methods for a study of the Na-H{sub 2}-O{sub 2} system, as well as of the related problem of the attack of pyrex glass by molten sodium. The conventional method for dosing oxygen by amalgamation was first adapted to the simultaneous measurement of the hydride. We then developed a method for dosing the total hydrogen by measuring successively the concentrations of gas present in the hydride and hydroxide form. This method is based on the thermal decomposition of the hydride and the reaction between sodium and the hydroxide. Our contribution to the study of the Na-H{sub 2}-O{sub 2} System consists first of all in the study of the reaction between hydrogen and sodium in the temperature range from 150 to 250 deg C and at a pressure of about 150 mm of mercury. The study of the thermal decomposition of the hydride in sodium was then studied. It was possible to make some qualitative observations concerning the reaction between sodium and sodium hydroxide. Finally some complementary tests made it possible to define the nature of the phenomena occurring during the attack of pyrex glass by sodium. (author) [French] Cette etude comporte essentiellement deux parties. La premiere est consacree a la mise au point de methodes de dosages permettant de determiner selectivement les impuretes oxygenees et hydrogenees presentes dans le sodium, a savoir l'oxyde, l'hydrure et l'hydroxyde. La seconde met a profit ces methodes en vue de l'etude du systeme Na-H{sub 2}-O{sub 2}. ainsi que du phenomene connexe d'attaque du verre pyrex par le sodium fondu. La methode classique de dosage de l'oxygene par amalgamation a d'abord ete adaptee au dosage simultane de l'hydrure. Nous avons ensuite mis au point le dosage de l

Contribution to the study of the behaviour of silicon planar transistors exposed to the {sup 60}Co {gamma} rays; Contribution a l'etude du comportement des transistors silicium a structure plane soumis aux rayons {gamma} du {sup 60}Co

Energy Technology Data Exchange (ETDEWEB)

Le Ber, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-05-15

This report gives an account of studies carried out on bipolar silicon planar transistors irradiated by {sup 60}Co {gamma} rays. The author describes the interactions on the matter of the different types of particles and he gives a brief bibliographical recall of foreign studies. The technological structure of the planar transistors is then described in order to help the understanding of the phenomena, general comments are made about the choice of measured parameters and on the statistical interpretation of results. An automatic instrument for the measurement of the gain is described and the reproducibility of the results is stated The complexity of the problem and the difficulty to predict the behaviour of the semiconductors components are clearly shown. It is stated that the observed dispersions depend on: - the electrical bias during irradiation - the injection level in the emitter-base junction during the measurement - the manufacturer for a given type - the instantaneous dose rate - the geometry used The problem is then examined from the reliability point of view and methods are given to evaluate the reliability for a given dose - 'Worst case' method - moment method - Monte Carlo method. (author) [French] Ce rapport rend compte du travail effectue sur les transistors bipolaires au silicium irradies au rayons {gamma} du cobalt 60. On passe en revue les mecanismes d'interaction des differents rayonnements avec la matiere et on fait un bref rappel bibliographique des etudes effectuees a l'etranger. On decrit ensuite la structure technologique du transistor pour aider a la comprehension des phenomenes, puis on donne des generalites sur le choix des parametres mesures et l'interpretation statistique des resultats. On decrit l'ensemble du systeme de mesure de gain et on s'attache a montrer la reproductibilite des mesures. Les resultats experimentaux mentionnes etablissent clairement la complexite du probleme et la difficulte qu'il y a de faire des previsions. On

Serotonin transporter gene polymorphism and myocardial infarction: Etude Cas-Témoins de l'Infarctus du Myocarde (ECTIM).

Science.gov (United States)

Fumeron, Frédéric; Betoulle, Dina; Nicaud, Viviane; Evans, Alun; Kee, Frank; Ruidavets, Jean-Bernard; Arveiler, Dominique; Luc, Gérald; Cambien, François

2002-06-25

Depression is a risk factor for myocardial infarction (MI). Selective serotonin reuptake inhibitors reduce this risk. The site of action is the serotonin transporter (SLC6A4), which is expressed in brain and blood cells. A functional polymorphism in the promoter region of the SLC6A4 gene has been described. This polymorphism may be associated with the risk of MI. The SLC6A4 polymorphism has been investigated by polymerase chain reaction in 671 male patients with MI and in 688 controls from the Etude Cas-Témoins de l'Infarctus du Myocarde (ECTIM) multicentric study. Percentages for LL, LS, and SS genotypes were 35.5%, 45.4%, and 19.1%, respectively, for cases versus 28.1%, 49.1%, and 22.8%, respectively, for controls. S allele frequency was 41.8% and 47.4% for cases and controls, respectively. After adjustment for age and center by using multivariable logistic regression, the odds ratio for MI associated with the LL genotype was 1.40 (95% CI 1.11 to 1.76, P=0.0047). The LL genotype of the SLC6A4 polymorphism is associated with a higher risk of MI. This could be attributable to the effect of the polymorphism on serotonin-mediated platelet activation or smooth muscle cell proliferation or on other risk factors, such as depression or response to stress.

Cognitive decline is associated with systemic oxidative stress: the EVA study. Etude du Vieillissement Artériel.

Science.gov (United States)

Berr, C; Balansard, B; Arnaud, J; Roussel, A M; Alpérovitch, A

2000-10-01

To determine whether systemic oxidative stress status is associated with cognitive decline. A longitudinal population-based study. A cohort study of older subjects in Nantes, France. A total of 1166 high cognitive functioning subjects aged 60 to 70 in the Etude du Vieillissement Arteriel (EVA) cohort with a 4 year follow-up. Subjects completed a baseline interview and a global cognitive test (Mini-Mental Status Examination (MMSE)). Blood samples were obtained at baseline to determine plasma levels of selenium, carotenoids, thiobarbituric acid reactant substances (TBARS), an indicator of lipoperoxidation, and red blood cell vitamin E. Risk of cognitive decline, defined as a loss of 3 points in MMSE score between baseline and the 4 year follow-up, was assessed by oxidative stress level. Subjects with the highest levels of TBARS show an increased risk of cognitive decline (adjusted odds ratio (OR) = 2.25; confidence interval (CI) 95% = 1.26-4.02). This result is reinforced in the lower antioxidant status subgroup. Subjects with low levels of selenium have an increased risk of cognitive decline (OR = 1.58; CI 95% = 1.08-2.31) after adjustment for various confounding factors. These results suggest that increased levels of oxidative stress and/or antioxidant deficiencies may pose risk factors for cognitive decline. The direct implication of oxidative stress in vascular and neurodegenerative mechanisms that lead to cognitive impairment should be further explored.

Investigation de l'anisotropie du gap supraconducteur dans les composes Ba(Fe(1-x)Co(x))2As2, Ba(1-x)K(x)Fe2As2, LiFeAs et Fe1-deltaTe(1-x)Se(x)

Science.gov (United States)

Reid, Jean-Philippe

ommaire La structure du gap supraconducteur et sa modulation sont intimement liees au potentiel d'interaction responsable de l'appariement des electrons d'un supraconducteur. Ainsi, l'etude de la structure du gap-SC et de sa modulation permettent de faire la lumiere sur la nature du mecanisme d'appariement des electrons. A cet egard, les resultats experimentaux des supraconducteurs a base de fer ne cadrent pas dans un seul ensemble, ce qui est en opposition au gap-SC universel des cuprates. Dans ce qui suit, nous presenterons une etude systematique du gap-SC pour plusieurs pnictides. En effet, en utilisant la conductivite thermique, une sonde directionnelle du gap-SC, nous avons ete en mesure de reveler la structure du gap-SC pour les composes suivants : Ba1-xKxFe 2As2, Ba(Fe1-xCo x)2As2, LiFeAs et Fe1-deltaTe 1-xSex. L'etude de ces quatre composes, de trois differentes familles structurales, a pu etablir un tableau partiel mais tres exhaustif de la structure du gap-SC de pnictides. En effet, tel qu'illustre dans cette these, ces quatre composes ne possedent aucun noeud dans leur structure du gap-SC a dopage optimal. Toutefois, a une concentration differente de celle optimale pour les composes K-Ba122 et Co-Ba122, des noeuds apparaissent sur la surface de Fermi, aux extremites 'du dome supraconducteur. Ceci suggere fortement que, pour ces composes, la presence de noeuds sur la surface de Fermi est nuisible a la phase supraconductrice. Mots-cles: Supraconducteurs a base de fer, Pnictides, Structure du gap supraconducteur, Conductivite thermique

Study of radio-active ions in the atmosphere; Etude des ions radioactifs de l'atmosphere

Energy Technology Data Exchange (ETDEWEB)

Renoux, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1965-01-01

A comparative study is made of active, deposits of radon and thoron in suspension in the atmosphere by means of {alpha} radiation counting, using ZELENY tubes, scattering equipment, filter papers or membranes. It has been possible to show the existence of small and large ions which are negative and positive, as well as of neutral radio-active nuclei; their properties are studied. A theoretical interpretation of the results is presented. The average content of radon (using the Ra A concentration) and of Th B in the air has been determined. The radioactive equilibrium between radon and its daughter products in atmospheric air are examined. The techniques developed for active radon and thoron deposits are applied to the study of artificial radio-activity, the analyses being carried out by means of {gamma} spectrometry. (author) [French] On effectue une etude comparative entre les depots actifs du radon et du thoron en suspension dont l'atmosphere a l'aide de comptages de rayonnement {alpha}, en utilisant des tubes de ZELENY, une batterie de diffusion, des papiers filtres ou des membranes. On met ainsi en evidence la presence de petits et gros ions negatifs et positifs, ainsi que celle de noyaux neutres radioactifs, et on etudie leurs proprietes. Une Interpretation theorique des resultats obtenus est developpee. On determine la teneur moyenne de l'air en radon (a partir de la concentration en Ra A) et en Th B. L'equilibre radioactif entre le radon et ses descendants, dans l'air atmospherique, est examine. Les Techniques mises au point pour les depots actifs du radon et du thoron sont appliquees a l'etude de la radioactivite artificielle, les depouillements s'effectuant par spectrometrie {gamma}. (auteur)

Nouvelles: KEK: B pour BELLE; NA48 mesure la violation directe de CP; LEL: le laser à électrons libres dépasse le kilowatt; Le LEP à 100 pour 100; Tour d'honneur au RHIC; Mesures de précision; Etude sur les modes de gestion du village planétaire; Conférence PANIC99 à Uppsala; Rencontre électron-noyau à HERA; LPP, Doubna célèbre une décennie; Les physiciens auscultent le photon; Aimants chauds venus du froid

CERN Multimedia

1999-01-01

Nouvelles: KEK: B pour BELLE; NA48 mesure la violation directe de CP; LEL: le laser à électrons libres dépasse le kilowatt; Le LEP à 100 pour 100; Tour d'honneur au RHIC; Mesures de précision; Etude sur les modes de gestion du village planétaire; Conférence PANIC99 à Uppsala; Rencontre électron-noyau à HERA; LPP, Doubna célèbre une décennie; Les physiciens auscultent le photon; Aimants chauds venus du froid

Accouchement par césarienne et mortalité maternelle du postpartum

OpenAIRE

Deneux-Tharaux , Catherine; Carmona , Elodie; Bouvier-Colle , Marie-Hélène; Bréart , Gérard

2006-01-01

Objectifs Une augmentation continue du taux d'accouchements par césarienne (CS)est observée dans la plupart des pays depuis 20 ans. Cette évolution a suscité l'émergence d'un débat controversé sur les risques et les bénéfices associés à la CS. L'objectif de cette étude était d'estimer le risque de mort maternelle du postpartum lié directement à la CS par comparaison à l'accouchement par voie basse, globalement et en distinguant les CS pre- ou intra- partum . Méthode Etude cas/témoins. Les cas...

Theoretical study, and construction, of a spherical electrostatic beta spectrometer; Etude theorique et realisation d'un spectrometre beta electrostatique spherique

Energy Technology Data Exchange (ETDEWEB)

Moret, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-03-15

After a literature survey showing the importance of an electrostatic spectrometer with spherical electrodes for studying disintegration processes, the theoretical characteristics of such an apparatus are derived (determination of the trajectory equations calculation of the transmission and of the resolving power the case of a point source and of an extended source). The apparatus built as a result of these calculations is described. The electrostatic field distribution outside the electrodes is derived. As well as giving electron spectra ({beta} disintegration and conversion electrons) the apparatus make s it possible to study e-{gamma}, e-{beta}, e-e-{gamma} and e-e-{beta} coincidences. In the last part are given experimental characteristics and the results of the first measurements made on conversion electron spectra ({sup 161}Tb, {sup 151}Pm, {sup 155}Eu) and on coincidences ({sup 170}Tm) using this spectrometer. (author) [French] Apres une etude bibliographique montrant l'interet que presente un spectrometre electrostatique a electrodes spheriques pour l'etude des schemas de desintegration, l'auteur etablit les caracteristiques theoriques d'un tel appareil (determination de l'equation des trajectoires calcul de la transmission et du pouvoir de resolution cas d'une source ponctuelle et d'une source etendue). On decrit l'appareil realise d'apres ces calculs. On etablit la repartition du champ electrostatique a l'exterieur des electrodes. Outre le trace des spectres d'electrons (desintegration {beta} et electrons de conversion), l'appareil permet l'etude de coincidences e-{gamma}, e-{beta}, e-e-{gamma} and e-e-{beta}. Dans la derniere partie, sont donnees les caracteristiques experimentales et les premieres etudes de spectres d'electrons de conversion ({sup 161}Tb, {sup 151}Pm, {sup 155}Eu) et de coincidences ({sup 170}Tm) faites a l'aide de ce spectrometre. (auteur)

Effect of high energy electrons on the skin and on the underlying tissues of the rabbit. A clinical and histological study; Effets des electrons de haute energie sur la peau et les tissus sous-jacents du lapin. Etude clinique et histologique

Energy Technology Data Exchange (ETDEWEB)

Legeay, G; Vialettes, H; Adnet, J J; Court, L; Masse, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1967-07-01

The authors consider in this report the effects of high-energy electrons on rabbit teguments and on the underlying tissues after a single high dose irradiation. After briefly considering the mechanism of interaction between the electrons and matter as a function of their energy, the authors describe the dosimetry carried out, as a function of the irradiation device. The animal received surface doses of 5700 to 22100 rads in the thigh; the electron energy varied from 21 to 30 MeV. A clinical study was carried out over a period of nine months with a view to following the evolution of the damage and the functional degradation of the underlying tissues. A histological study of the induced damage was made after a second irradiation using 30 MeV electrons to produce doses of 16400 rads. Interesting observations were made concerning the damage caused to muscular and nerve tissues. (authors) [French] Les auteurs etudient, dans ce rapport, les effets des electrons de haute energie sur les teguments du lapin et les tissus sous-jacents apres une irradiation unique a dose elevee. Apres un rappel du mecanisme de l'interaction des electrons avec la matiere en fonction de leur energie, la dosimetrie realisee est exposee en fonction du dispositif d'irradiation. Les animaux ont recu, au niveau de la cuisse, des doses en surface de 5700 a 22100 rads; les energies des electrons vont de 21 a 30 MeV. Une etude clinique des lesions, observees pendant 9 mois, decrit leur evolution ainsi que les alterations fonctionnelles des tissus sous-jacents. Une etude histologique des lesions induites a ete realisee au cours d'une seconde experience pour des doses de 16400 rads avec des electrons de 30 MeV. D'interessantes observations ont ete faites concernant les lesions des tissus musculaires et nerveux. (auteurs)

Creeping of hysteresis cycles; Reptation des cycles d'hysteresis

Energy Technology Data Exchange (ETDEWEB)

Neel, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de Grenoble, 38 (France)

1959-07-01

Creeping consists of a kind of progressive translation of dissymmetric ferromagnetic hysteresis cycles as a function of the order number of the cycle. It is interpreted here by means of a probable coupling field, the existence of which is connected to a statistical conception of the distribution of the elementary regions. (author) [French] La reptation consiste en une sorte de translation progressive des cycles d'hysteresis ferromagnetiques dissymetriques en fonction du numero d'ordre du cycle. L'auteur l'interprete au moyen d'un champ aleatoire de couplage dont l'existence est liee a une conception statistique de la distribution des domaines elementaires. (auteur)

Study of the low energy gamma transitions of molybdenum 99; Etude des transitions gamma de basse energie du molybdene 99

Energy Technology Data Exchange (ETDEWEB)

Ravier, J.

1959-07-01

The study of the decay scheme of Mo{sup 99} has been performed on the magnetic iron-less and double focalization spectrograph of the Institute of Nuclear Physics of Lyon. Methods of internal and external conversion have been used. The intensities of the Mo{sup 99} sources used were not strong enough to determine the characteristics of the internal conversion accurately but were sufficient to precise the decay scheme at low energy. We have determined the internal conversion ratio for the transition of 180 KeV, we have got: 0.13 ± 0.03 which is not in agreement with the value given by a previous experiment based on γ-γ coincidence. Our method seems to be more reliable. We confirm the E2 feature of this transition and its 5/2+ spin. We have determined another important parameter for the 180 KeV de-excitation: the percentage of transitions that do not pass by the isomeric level but by the 140 KeV level is (6 ± 2)%, the isomeric level being at 142 KeV. The gamma spectra at low energy has been studied through the photoelectric effect in a lead converter [French] L'etude du schema de desintegration du Mo{sup 99} deja faite par differents auteurs a ete reprise par des methodes de conversion interne et externe, an moyen du spectrographe magnetique sans fer et a double focalisation de l'Institut de Physique Nucleaire de Lyon. Apres avoir cherche les possibilites d'obtention de sources de haute activite specifique par separation isotopique Szilard-Chalmers sur des molybdates alcalins, le spectre de conversion interne a basse energie a ete mesure. Ainsi se trouverent etre determines les coefficients partiaux de conversion interne. Le spectre γ a basse energie a ete etudier au moyen de l'effet photoelectrique sur un convertisseur de plomb. Les coefficients de conversion interne et les intensites relatives des differentes transitions ont ete calcules moyennant certaines hypotheses. La comparaison entre les valeurs donnees par la theorie et l'experience des differentes

Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

Energy Technology Data Exchange (ETDEWEB)

Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

Use of potassium-42 in the study of kidney functioning; Emploi du patassium-12 pour l'etude du fonctionnement renal

Energy Technology Data Exchange (ETDEWEB)

Morel, F; Guinnebault, M [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

Following an intravenous injection of potassium-42 as indicator, an analysis of the specific activity vs. time curve in arterial plasma, in venous plasma efferent from the kidney, in urine and in various regions of the kidney of rabbits reveals that: 1) The turnover rate of potassium in the cortex cells (proximal and distal convoluted tubes) is very large, being limited only by renal blood flow. 2) The turnover rate of potassium in deep regions (Henle loops and collector tubules) is much smaller. 3) Potassium in the urine comes from cells of the convoluted tubes and not from cells of Henle loops, collector ducts, or glomerular filtrate. 4) Any potassium filtered at the level of the glomerules would be entirely reabsorbed at the level of the proximal tube, while total potassium in the urine results from a process of excretion by cells of the distal tube. These results are comparable with the assumption that the movement of potassium between interstitial medium and convoluted tube cells results from entirely passive processes. (author) [French] Apres injection intraveineuse au lapin de radiopotassium comme indicateur, l'analyse des courbes de la radioactivite specifique du potassium, mesuree en fonction du temps dans le plasma arteriel, dans le plasma veineux efferent du rein, dans l'urine et dans diverses regions du rein, lui-meme, permet de montrer: 1)que la vitesse de renouvellement du potassium contenu dans les cellules du cortex (tubes contournes proximaux et distaux), apparait tres grande et semble limitee par le debit sanguin renal. 2) que le vitesse de renouvellement du potassium contenu dans les regions profondes (anses de Henle et tubes collecteurs) est beaucoup plus faible. 3) que le potassium de l'urine a pour precurseur le potassium des cellules des tubes contournes et non celui des cellules des anses de Henle ou des canaux collecteurs, ni celui du filtrat glomerulaire. 4) que le potassium filtre au niveau des glomerules serait entierement reabsorbe au

Study of a photomultiplier for the measurement of low light flows by photon counting; Etude d'un photomultiplicateur en vue de la mesure des faibles flux lumineux par comptage de photons

Energy Technology Data Exchange (ETDEWEB)

Haye, Kleber

1964-03-20

After a recall of the history of the discovery and use of the photoemission effect, a presentation of the main characteristics of photomultipliers, a discussion of performance and weaknesses of electron multiplier-based cells, this research thesis addresses the study of low light flows. The author tried to determine whether it was possible, at ambient temperature, to reduce the influence of the thermoelectric effect. In order to do so, he made a detailed study of the amplitude spectrum of pulses of photoelectric origin. In order to analyse the influence of temperature of photomultiplier characteristics, he studied, with respect to temperature, the variation of the counting rate corresponding to darkness, the variation of pulse amplitude spectrum, and relative variations of the quantum efficiency for various wavelengths. In parallel with the study by counting, a study has been performed by using the well known mean current measurement [French] Si l'on veut etudier de faibles flux lumineux, c'est surtout l'effet thermoelectronique qui limite a temperature ambiante le domaine possible des mesures. Les electrons qui arrivent en effet a quitter la photocathode ou les dynodes donnent naissance a des groupes supplementaires d'electrons venant s'ajouter a ceux causes par effet photoelectrique. En utilisant une methode de mesure par comptage des groupes d'electrons, nous nous sommes attaches a determiner s'il etait possible a temperature ordinaire de reduire 1'influence de l'effet thermoelectronique. Pour cela, nous avons fait une etude detaillee du spectre d'amplitude des impulsions d'origine photoelectrique. Toutefois, la solution la plus efficace pour combattre l'effet thermoelectronique etant le refroidissement, nous avons essaye d'analyser l'influence de la temperature sur les caracteristiques du photomultiplicateur. Nous avons ainsi etudie en fonction de la temperature la variation du taux de comptage correspondant a l'obscurite, la variation du spectre d

Prediction du profil de durete de l'acier AISI 4340 traite thermiquement au laser

Science.gov (United States)

Maamri, Ilyes

Les traitements thermiques de surfaces sont des procedes qui visent a conferer au coeur et a la surface des pieces mecaniques des proprietes differentes. Ils permettent d'ameliorer la resistance a l'usure et a la fatigue en durcissant les zones critiques superficielles par des apports thermiques courts et localises. Parmi les procedes qui se distinguent par leur capacite en terme de puissance surfacique, le traitement thermique de surface au laser offre des cycles thermiques rapides, localises et precis tout en limitant les risques de deformations indesirables. Les proprietes mecaniques de la zone durcie obtenue par ce procede dependent des proprietes physicochimiques du materiau a traiter et de plusieurs parametres du procede. Pour etre en mesure d'exploiter adequatement les ressources qu'offre ce procede, il est necessaire de developper des strategies permettant de controler et regler les parametres de maniere a produire avec precision les caracteristiques desirees pour la surface durcie sans recourir au classique long et couteux processus essai-erreur. L'objectif du projet consiste donc a developper des modeles pour predire le profil de durete dans le cas de traitement thermique de pieces en acier AISI 4340. Pour comprendre le comportement du procede et evaluer les effets des differents parametres sur la qualite du traitement, une etude de sensibilite a ete menee en se basant sur une planification experimentale structuree combinee a des techniques d'analyse statistiques eprouvees. Les resultats de cette etude ont permis l'identification des variables les plus pertinentes a exploiter pour la modelisation. Suite a cette analyse et dans le but d'elaborer un premier modele, deux techniques de modelisation ont ete considerees, soient la regression multiple et les reseaux de neurones. Les deux techniques ont conduit a des modeles de qualite acceptable avec une precision d'environ 90%. Pour ameliorer les performances des modeles a base de reseaux de neurones, deux

Study of the stopping power of various filters; Etude du pouvoir d'arret de differents filtres

Energy Technology Data Exchange (ETDEWEB)

Madelaine, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The first part is devoted to a study of aerosols obtained from the combustion of various smoke-producing compounds. A trial aerosol of which the size distribution is the closest possible to that of atmospheric dusts has been defined. The efficiency of various filters has been determined for successive increments of the dimensions and not for the whole range of its diameter distribution. The variation in the efficiency of the filtering layers as a function of the filtering speed and particle size has been studied for aerosols having particle diameters of over 0.3 {mu}. The second part describes an original method for measuring the efficiency of filters for ultra-fine particles (under 0.1 {mu}) using the fixation properties of radioactive atoms resulting from the decay of thoron. (author) [French] La premiere partie est consacree a l'etude des aerosols obtenus a partir de la combustion de divers types de fumigenes. Un aerosol d'essai, dont la repartition granulometrique se rapproche le plus possible des poussieres atmospheriques a ete defini. L'efficacite de plusieurs filtres a ete determinee pour des tranches successives de dimension et non pour l'aerosol pris dans sa totalite. La variation de l'efficacite des couches filtrantes en fonction de la taille des particules et de la vitesse de filtration a ete examinee pour des aerosols superieurs a 0,3 {mu}. La seconde partie decrit une methode originale permettant de mesurer l'efficacite des filtres pour des particules ultrafines (inferieures a 0,1 {mu}) en utilisant la propriete de fixation des atomes radioactifs des descendants du thoron. (auteur)

Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

Energy Technology Data Exchange (ETDEWEB)

Vaiman, M; Guenet, J -L; Maas, J; Nizza, P

1966-05-01

Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

Energy Technology Data Exchange (ETDEWEB)

Vaiman, M.; Guenet, J.-L.; Maas, J.; Nizza, P

1966-05-01

Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

Measurement of the thermal utilisation factor of the reactor G1; Mesure du facteur d'utilisation thermique du reacteur G1

Energy Technology Data Exchange (ETDEWEB)

Roullier, F; Schmitt, A P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

The thermal utilisation factor of the lattice of the reactor G1 has been measured by applying the autoradiographic technique to thin detectors irradiated in the cell. The experimental apparatus is described, and the results compared with those obtained by calculation based on various formulae. The results of the study of the thermal flux distribution in a cell containing a thorium rod of the same diameter as the uranium rods in the lattice are also given. The precision of the measurements is discussed. Value found: f diameter 26 = 0.8949 {+-} 0,005. (author) [French] Le facteur d'utilisation thermique du reseau du reacteur G1 a ete mesure en appliquant la technique de l'autoradiographie a des detecteurs minces irradies dans la cellule. Les dispositifs experimentaux sont decrits et les resultats sont compares a ceux obtenus par le calcul a partir de diverses formules. Les resultats de l'etude de la distribution du flux thermique dans une cellule contenant une barre de thorium de meme diametre que les barres d'uranium du reseau sont egalement indiques. La precision des mesures est discutee. Valeur trouvee: f diametre 26 = 0,8949 {+-} 0,005. (author)

Etude du secteur des préparations pour desserts 2009

OpenAIRE

Combris, Pierre; Goglia, Raffaella; Henini, Marion; Lafitte, Caroline; Soler, Louis Georges; Spiteri, Marine; Stevenin, Florence; Observatoire de la Qualité de l'Alimentation

2010-01-01

Cette étude sectorielle de suivi du marché des préparations pour desserts repose principalement sur les informations relevées sur les emballages, notamment les valeurs nutritionnelles, la taille des portions indiquées, les repères nutritionnels, les recommandations de consommation… Pour cette première année d’étude, la base de données compte 155 références, correspondant à une couverture d’au moins 67% du marché en volume. Pour affiner au mieux les traitements effectués, le secteur a été déco...

Generalities on the dynamic behaviour of rapid reactors. Preliminary studies on Rapsodie; Generalites sur le comportement dynamique des piles rapides. Etudes preliminaires de rapsodie

Energy Technology Data Exchange (ETDEWEB)

Campan, J L; Chaumont, J P; Clauzon, P P; Ghesquiere, G; Leduc, J; Schmitt, A P; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1963-07-01

The study of the dynamic behaviour of fast reactors may be divided into three section: 1. Stability studies around equilibrium power only the linear case was examining. S. Transient studies in the case of usual reactor operation (shut down, scram, etc.) with thermal shocks evaluation, for instance. 3. Explosion studies, for the maximum credible accidents. This report presents the status of the studies performed at the 'Physics Research Department' at Cadarache. Methods used are detailed and illustrated with the results obtained on a preliminary metallic core of the Rapsodie Reactor. (authors) [French] Le comportement dynamique des piles rapides, se presente tout naturellement sous trois aspects: 1. Etude de stabilite autour d'un regime d'equilibre (nous nous sommes bornes ici au cas lineaire). 2. Etude de regimes transitoires lors des operations normales de pile (arret, arret d'urgence, etc.) avec evaluation des chocs thermiques par exemple. 3. Etude des regimes transitoires de caractere explosif lors des accidents les plus graves possibles. Ce rapport presente l'etat des etudes a la date du 20 decembre 1961 a la Section d'Etudes de Piles Rapides a CADARACHE. Les methodes employees ont ete detaillees et illustrees a partir des resultats obtenus sur une premiere version 'combustible metallique' de Rapsodie. (auteurs)

Studies of magnetism with inelastic scattering of cold neutrons; Etudes de magnetisme realisees a l'aide de la diffusion inelastique de neutrons froids

Energy Technology Data Exchange (ETDEWEB)

Jacrot, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Inelastic scattering of cold neutrons can be used to study some aspects of magnetism: spins waves, exchange integrals, vicinity of Curie point. After description of the experimental set-up, several experiments, in the fields mentioned above, are analysed. (author) [French] La technique de diffusion inelastique des neutrons froids est utilisee pour etudier certains aspects du magnetisme: ondes de spins, integrales d'echange, etude au voisinage du point de Curie, etc. Apres une description de l'appareillage, on analyse diverses experiences effectuees dans les domaines enumeres plus haut. (auteur)

The control equipment of the Melusine II reactor; L'equipement de controle du reacteur Melusine II

Energy Technology Data Exchange (ETDEWEB)

Cordelle, M; Delcroix, V; Denis, P; Gariod, R

1963-07-01

Melusine II, low-power reactor, used for the study of Siloe core has diverged at the CEA Grenoble, the 23. May 1962; its monitoring board studied and carried out in this center is the first in France to be entirely transistorized. The first months of running have justified the hope put in the new electronics to improve the stability and the safety of running. The article describes the design of the control and gives the main characteristics of the measurement chains and of the actions on reactivity. (O.M.) [French] Melusine II, reacteur de faible puissance destine a l'etude du coeur de Siloe a diverge au Centre d'Etudes Nucleaires de Grenoble, le 23 mai 1962, son tableau de controle etudie et realise dans ce Centre est le premier en France a etre entierement transistorise. Les premiers mois de fonctionnement ont justifie l'espoir mis dans la nouvelle electronique pour ameliorer la stabilite et la surete de fonctionnement. L'article decrit la conception du controle et donne les principales caracteristiques des chaines de mesure et des actions sur la reactivite. (auteurs)

Study of the long-term values and prices of plutonium; a simplified parametrized model; Etude des valeurs et des prix du plutonium a long terme; un modele parametre simplifie

Energy Technology Data Exchange (ETDEWEB)

Gaussens, J; Paillot, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The authors define the notions of use values and price of plutonium. They give a 'simplified parametrized model' simulating the equilibrium of the offer and the demand in time, concerning the plutonium and the price deriving from the relative scarcity of this metal, taking into account the technical and economic operating parameters of the various reactors confronted. This model is simple enough to allow direct computations and establish clear relations between the various parameters. The use of the linear programmes method allows on the other hand a wide extension of the model. This report includes three main parts: I - General description of the study (without detailed calculations) II - Mathematical development of the simplified parametrized model and application (the basic data and the results of the calculations are given) III - Appendices (giving the detailed computations of part II). (authors) [French] Les auteurs definissent les notions de valeurs d'usage et de prix du plutonium. Ils donnent un 'modele parametre simplifie' simulant l'equilibre de l'office et de la demande dans le temps concernant le plutonium et le prix qui decoule de la rarete relative de ce metal, compte tenu des parametres techniques et economiques de fonctionnement des divers reacteurs en presence. Ce modele est suffisamment simple pour permettre des calculs manuels et etablir des liaisons claires entre les divers parametres. L'utilisation de la technique des programmes lineaires permet par ailleurs une extension considerable du modele. Cette note comprend trois parties: I - Expose general de l'etude (sans expose du detail des calculs) II - Developpement mathematique du modele parametre simplifie et application (on precise les donnees de base et le resultat des calculs) III - Annexes (donnant le detail des calculs de la partie II). (auteurs)

Study of beam-plasma interactions in the presence of a magnetic field; Etude d'interactions faisceau-plasma en la presence d'un champ magnetique

Energy Technology Data Exchange (ETDEWEB)

Etievant, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1963-12-15

The instabilities developing in a 'beam-plasma' system and in a 'double-beam' system in the presence of a magnetic field are discussed theoretically starting from the conductivity tensor expression for a multi-beam system. Oblique propagation is taken into account and this leads to the introduction of certain instability mechanisms which would not appear in the case of a propagation which is purely parallel or perpendicular to the magnetic field. Two experiments are described: a) Study of the collision of two counterstreaming electron beams: An instability has been observed experimentally which leads to the generation of a stationary cyclotron wave having a frequency of {omega}{sub ce}/2. A description is given of the measurement of the interaction frequency, of the wavelength and of the build-up time of the wave. b) Study of a 'beam-plasma' system: A description is given of the measurement of the spectra of excited waves and of the perturbation of the beam velocity distribution at the plasma-exit. This perturbation is very pronounced when 'plasma-plasma' interaction appears in the system. A study into cyclotron oscillations produced in the plasma by excitation due to the passage of the beam is also described in this report. (author) [French] Les instabilites se developpant dans un systeme 'faisceau-plasma' et dans un systeme 'faisceau-faisceau' en la presence d'un champ magnetique sont discutees theoriquement a partir de l'expression du tenseur de conductivite d'un systeme multi-faisceaux. La propagation oblique est prise en consideration, ce qui introduit certains mecanismes d'instabilite qui n'apparaitraient pas pour une propagation purement parallele ou perpendiculaire au champ magnetique. Deux experiences sont decrites: a) Etude de la collision de deux faisceaux d'electrons: Une instabilite conduisant a la generation d'une onde cyclotronique stationnaire a la frequence {omega}{sub ce}/2 a ete observee experimentalement. Les mesures de la frequence d

Use of potassium-42 in the study of kidney functioning; Emploi du patassium-12 pour l'etude du fonctionnement renal

Energy Technology Data Exchange (ETDEWEB)

Morel, F.; Guinnebault, M. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

Following an intravenous injection of potassium-42 as indicator, an analysis of the specific activity vs. time curve in arterial plasma, in venous plasma efferent from the kidney, in urine and in various regions of the kidney of rabbits reveals that: 1) The turnover rate of potassium in the cortex cells (proximal and distal convoluted tubes) is very large, being limited only by renal blood flow. 2) The turnover rate of potassium in deep regions (Henle loops and collector tubules) is much smaller. 3) Potassium in the urine comes from cells of the convoluted tubes and not from cells of Henle loops, collector ducts, or glomerular filtrate. 4) Any potassium filtered at the level of the glomerules would be entirely reabsorbed at the level of the proximal tube, while total potassium in the urine results from a process of excretion by cells of the distal tube. These results are comparable with the assumption that the movement of potassium between interstitial medium and convoluted tube cells results from entirely passive processes. (author) [French] Apres injection intraveineuse au lapin de radiopotassium comme indicateur, l'analyse des courbes de la radioactivite specifique du potassium, mesuree en fonction du temps dans le plasma arteriel, dans le plasma veineux efferent du rein, dans l'urine et dans diverses regions du rein, lui-meme, permet de montrer: 1)que la vitesse de renouvellement du potassium contenu dans les cellules du cortex (tubes contournes proximaux et distaux), apparait tres grande et semble limitee par le debit sanguin renal. 2) que le vitesse de renouvellement du potassium contenu dans les regions profondes (anses de Henle et tubes collecteurs) est beaucoup plus faible. 3) que le potassium de l'urine a pour precurseur le potassium des cellules des tubes contournes et non celui des cellules des anses de Henle ou des canaux collecteurs, ni celui du filtrat glomerulaire. 4) que le potassium filtre au niveau des glomerules serait entierement

Synthesis of 2-mercaptobenzothiazole ({sup 35}S); Synthese du mercapto-2-benzothiazole ({sup 35}S)

Energy Technology Data Exchange (ETDEWEB)

Bentov, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The synthesis of 2-mercaptobenzothiazole ({sup 35}S) by the interaction of 2-chloro benzothiazole and sodium hydrosulfide ({sup 35}S) has been studied. Under the conditions determined in this study a pure product with a radioactive yield of 79 per cent can be obtained. (author) [French] La synthese du mercapto-2-benzothiazole ({sup 35}S) par l'interaction du chloro-2-benzothiazole et I'hydrosurfure ({sup 35}S) de sodium a ete etudiee. On a trouve que dans les conditions determinees dans cette etude, on peut obtenir un produit pur avec un rendement radioactif de 79 pour cent. (auteur)

Some of the properties of plutonium and the aluminium-plutonium alloy; Quelques proprietes du plutonium et de l'alliage aluminium-plutonium

Energy Technology Data Exchange (ETDEWEB)

Abramson, R; Boucher, R; Fabre, R; Monti, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1959-07-01

physiques du plutonium. 1) Etude de l'allotropie du plutonium. a) Analyse thermique. On decrit brievement l'appareillage utilise et la technique de mesure. Les temperatures des points de transition et les chaleurs de transformation correspondantes ont ete determinees. Enfin, les resultats de l'etude particuliere de quelques points de transition sont exposes. b) Dilatometrie. L'analyse dilatometrique des changements de phase du plutonium a ete poursuivie a l'aide du dilatometre Chevenard a enregistrement photographique. On a fait varier les conditions de l'essai (vitesse de chauffe et de refroidissement, paliers isothermes, etc...) de maniere a preciser les caracteristiques de chaque transition notamment de la transition {delta} {yields} {gamma} au refroidissement. 2) Micrographie du plutonium. La preparation correcte des echantillons metallographiques exige une duree de polissage electrolytique tres courte, ce qui implique un polissage mecanique d'excellente qualite. On indique de nouveaux reactifs d'attaque qui revelent la structure du metal avec une grande nettete. 2- Etude des alliages aluminium-plutonium. Etude comparee des alliages Al-Pu et AI-U riches en aluminium. a) Analyse thermique. Les temperatures du liquidus et de fusion de l'eutectique Al-XAl{sub 4} ont ete precisees. La mesure des chaleurs de fusion a permis de determiner la composition exacte de l'alliage eutectique. b) Traitement thermique. La cinetique de coalescence de l'eutectique a ete etudiee par voie micrographique et en suivant l'evolution de la durete. Les resultats obtenus indiquent que le phenomene est plus rapide dans les alliages Al-Pu que dans les alliages AI-U. c) Etude micrographique de la transition XAI{sub 3} {yields} XAl{sub 4}. La reaction peritectique XAI{sub 3} + Iiq. {yields} XAI{sub 4} a ete supprimee par trempe. La transformation de la phase XAI{sub 3} a l'etat solide a ete etudiee ainsi que l'effet de faibles additions de silicium sur la cinetique de cette reaction. (auteur)

Some equipment for graphite research in swimming pool reactors; Quelques dispositifs d'etude du graphite dans les piles piscines

Energy Technology Data Exchange (ETDEWEB)

Seguin, M; Arragon, Ph; Dupont, G; Gentil, J; Tanis, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-07-01

The irradiation devices described are used for research concerning reactors of the natural uranium type, moderated by graphite and cooled by carbon dioxide. The devices are generally designed for use in swimming pool reactors. The following points have been particularly studied: - maximum use of the irradiation volume, - use of the simplest technological solutions, - standardization of certain constituent parts. This standardization calls for precision machining and careful assembling; these requirements are also true when a relatively low irradiation temperature is required and the nuclear heating is pronounced. Finally, the design of these devices is suitable for the irradiation of other fissile or non-fissile materials. (authors) [French] Les dispositifs d'irradiation decrits servent aux etudes relatives a la filiere des reacteurs a uranium naturel, moderes au graphite et refroidis par le gaz carbonique. Ils sont generalement concus pour etre utilises dans des piles piscines. L'accent a ete mis sur: - l'utilisation au maximum du volume d'irradiation, - le recours aux solutions technologiques les plus simples, - la standardisation de certaines parties constitutives. Cette standardisation impose un usinage precis et un montage soigne, lesquels sont egalement necessaires lorsqu'on doit obtenir une temperature d'irradiation relativement basse alors que l'echauffement nucleaire est important. Enfin, la conception de ces dispositifs est valable pour irradier d'autres materiaux non fissiles ou fissiles. (auteurs)

The origin of cholesterol in chyle demonstrated by nuclear indicator methods; Origines du cholesterol du chyle mises en evidence par la methode des indicateurs nucleaires

Energy Technology Data Exchange (ETDEWEB)

Vyas, M

1962-07-01

In order to obtain information about the mechanism of the intestinal absorption of cholesterol, rats having a lymphatic abdominal fistula are used. The animals receive either 4-{sup 14}C- cholesterol subcutaneously or orally, or the 1-{sup 14}C acetate. The study of the specific radio-activities of the cholesterol in chyle, in serum, in the lining, and in the intestinal contents makes it possible to define the roles played by the transfer cholesterol from the serum, by the cholesterol synthesised intestinally, and by the absorption cholesterol, in the formations of the lymph and of the chylomicrons. A new theory is proposed for the mechanism of cholesterol absorption. (author) [French] Pour obtenir des renseignements concernant le mecanisme de l'absorption intestinale du cholesterol, on utilise des rats porteurs d'une fistule lymphatique abdominale. Les animaux recoivent soit du cholesterol 4-{sup 14}C par voie sous-cutanee ou par voie orale, soit de l'acetate 1-{sup 14}C. L'etude des radioactivites specifiques du cholesterol du chyle, du serum, de la paroi et du contenu intestinal permet de preciser les roles joues par le cholesterol de transfert d'origine serique, par le cholesterol de synthese intestinale et par le cholesterol d'absorption, dans la formation de la lymphe et des chylomicrons. Une theorie nouvelle concernant le mecanisme de l'absorption du cholesterol est proposee. (auteur)

Preliminary study of the preparation of uranium 232 by irradiation of protactinium 231; Etude preliminaire a la preparation d'uranium 232 par irradiation de protactinium 231

Energy Technology Data Exchange (ETDEWEB)

Guillot, Ph. [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

1965-07-01

A bibliography about preparation of uranium 232 is done. This even-even isotope of uranium is suitable for radioactive tracer, neutron source through {alpha},n reaction and heat source applications. The irradiation of protactinium 231, the chemical separation and the purification of uranium are studied. (author) [French] Une etude bibliographique de la preparation d'uranium 232 a ete effectuee. Cet isotope pair-pair de l'uranium peut etre utilise en tant que traceur, source d'energie et source de neutrons, lorsqu'il est melange a un element leger tel le beryllium. Une etude du taux de formation des isotopes produits, lors de l'irradiation du protactinium 231 - une des manieres d'obtenir l'uranium 232 - a ete faite a l'aide d'un programme passe sur ordinateur. Les problemes poses par la separation chimique et la purification de l'uranium ont ete egalement envisages dans ce rapport. (auteur)

Study and construction of a {beta}-spectrometer of uniform axial magnetic field fitted with a {beta}-{gamma} coincidence selector. Study of the {beta} spectra of {sup 32}P, {sup 203}Hg, {sup 198}Au. Measurement of the conversion coefficients of {sup 203}Ti and of {sup 198}Hg; Etude et realisation d'un spectrometre-{beta} a champ magnetique axial uniforme, muni d'un selecteur de coincidence {beta}-{gamma}. Etude des spectres {beta} du {sup 32}p, {sup 203}Hg, {sup 198}Au. Mesure des coefficients de conversion du {sup 203}Ti et du {sup 198}Hg

Energy Technology Data Exchange (ETDEWEB)

Parsignault, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-06-01

various elements of the matrix. (author) [French] Dans une premiere partie est rappele le principe du spectrometre beta a champ axial uniforme en employant systematiquement la notion de caustique. L'appareil est decrit et ses proprietes comparees a celles deduites du calcul des trajectoires. Les detecteurs des rayons beta et des rayons gamma et le dispositif de selection des co cidences avec une resolution 2 {tau} de 5 nanosecondes sont egalement presentes. Dans une seconde partie, le spectrometre est employe a l'etude de corps de reference et on confirme les resultats obtenus avec la meilleure precision. Le spectre beta du {sup 60}Co a la forme statistique avec une precision de 1 pour cent, l'energie maximale E{sub 0} est de 316,5 {+-} 1,5 keV. Celui de la transition 7/2 + {yields} 11/2 du {sup 137}Cs possede la forme unique, une fois interdite. E{sub 0} = 522 {+-} 3 keV. Coefficients de conversion {alpha}{sub k} = 96 {+-} 1 X 10{sup -3} {alpha}L + M + N 20,9 {+-} 0,5 X 10{sup -3}. Les deux spectres beta du {sup 59}Fe, separes par coincidence avec le gamma ont la forme statistique E{sub 0} = 462 {+-} 2 keV (55,1 + 0,3 pour cent) et E{sub 1} = 275 {+-} 4 keV (44,9 {+-} 0,3 pour cent). On se propose ensuite d'examiner si la regle de selection l se manifeste dans la forme du spectre beta du phosphore 32. On constate, en effet, qu'elle s'ecarte de la forme statistique et on determine son coefficient de forme. L'interpretation theorique exige l'emploi de meilleures approximations que celles habituellement employees et elle n'est pas unique. Cette etude permet egalement de mettre en evidence la legere proportion de {sup 33}P que contient la source. L'etude du spectre beta de {sup 203}Hg suivi du gamma de 279 keV a pour but de determiner les coefficients de conversion. Le spectre interieur de l'or 198 n'a pas non plus la forme statistique. Le coefficient de forme est determine ainsi que les coefficients de conversion qui presentent un leger desaccord avec ceux calcules par Rose

Study and construction of a {beta}-spectrometer of uniform axial magnetic field fitted with a {beta}-{gamma} coincidence selector. Study of the {beta} spectra of {sup 32}P, {sup 203}Hg, {sup 198}Au. Measurement of the conversion coefficients of {sup 203}Ti and of {sup 198}Hg; Etude et realisation d'un spectrometre-{beta} a champ magnetique axial uniforme, muni d'un selecteur de coincidence {beta}-{gamma}. Etude des spectres {beta} du {sup 32}p, {sup 203}Hg, {sup 198}Au. Mesure des coefficients de conversion du {sup 203}Ti et du {sup 198}Hg

Energy Technology Data Exchange (ETDEWEB)

Parsignault, D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-06-01

various elements of the matrix. (author) [French] Dans une premiere partie est rappele le principe du spectrometre beta a champ axial uniforme en employant systematiquement la notion de caustique. L'appareil est decrit et ses proprietes comparees a celles deduites du calcul des trajectoires. Les detecteurs des rayons beta et des rayons gamma et le dispositif de selection des co cidences avec une resolution 2 {tau} de 5 nanosecondes sont egalement presentes. Dans une seconde partie, le spectrometre est employe a l'etude de corps de reference et on confirme les resultats obtenus avec la meilleure precision. Le spectre beta du {sup 60}Co a la forme statistique avec une precision de 1 pour cent, l'energie maximale E{sub 0} est de 316,5 {+-} 1,5 keV. Celui de la transition 7/2 + {yields} 11/2 du {sup 137}Cs possede la forme unique, une fois interdite. E{sub 0} = 522 {+-} 3 keV. Coefficients de conversion {alpha}{sub k} = 96 {+-} 1 X 10{sup -3} {alpha}L + M + N 20,9 {+-} 0,5 X 10{sup -3}. Les deux spectres beta du {sup 59}Fe, separes par coincidence avec le gamma ont la forme statistique E{sub 0} = 462 {+-} 2 keV (55,1 + 0,3 pour cent) et E{sub 1} = 275 {+-} 4 keV (44,9 {+-} 0,3 pour cent). On se propose ensuite d'examiner si la regle de selection l se manifeste dans la forme du spectre beta du phosphore 32. On constate, en effet, qu'elle s'ecarte de la forme statistique et on determine son coefficient de forme. L'interpretation theorique exige l'emploi de meilleures approximations que celles habituellement employees et elle n'est pas unique. Cette etude permet egalement de mettre en evidence la legere proportion de {sup 33}P que contient la source. L'etude du spectre beta de {sup 203}Hg suivi du gamma de 279 keV a pour but de determiner les coefficients de conversion. Le spectre interieur de l'or 198 n'a pas non plus la forme statistique. Le coefficient de forme est determine ainsi que les coefficients de conversion

116 Etude du régime alimentaire de la Chouette effraie Tyto alba ...

African Journals Online (AJOL)

SWEET

Résumé. Nous présentons dans ce travail les résultats de l'analyse du régime alimentaire d'un rapace nocturne. (la Chouette effraie Tyto alba) dans les plaines du Maroc atlantique à partir de plusieurs lots de pelotes de réjection collectées en 2012. Il s'agit de deux régions de la plaine du Gharb, une située dans un milieu.

Les premiers tours du monde à forfait. L’exemple de la Société des Voyages d’Etudes Autour du Monde (1878)

OpenAIRE

Gauthier, Lionel

2012-01-01

Dans la seconde moitié du XIXe siècle, avec le développement du bateau à vapeur et du chemin de fer, et l’ouverture de nouveaux axes de transport comme le Canal de Suez, le voyage autour du monde devient envisageable pour les touristes. Ainsi, dès 1872 des tours du monde à forfait sont organisés, ce qui témoigne de l’entrée du voyage autour du monde dans l’industrie touristique naissante. Cet article étudie ces premiers voyages d’un nouveau genre à travers l’exemple de la Société des Voyages ...

Some investigations on the pitting attack of magnesium and its alloys; Contribution a l'etude de la corrosion par piqures du magnesium et de ses alliages

Energy Technology Data Exchange (ETDEWEB)

Blanchet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-03-01

The pitting attack of magnesium and its alloys has been studied by means of potentio-kinetic polarisation curves; the following parameters have been considered: structural state and composition of the metal, chloride concentration and pH of the medium. The electrochemical data obtained demonstrate that when pH = 12, a localized corrosion might appear as soon as a 10{sup -3} M NaCl concentration is reached; on the other hand, when pH = 13, a much higher concentration (five times) has no effect. In the same conditions, the coupling of magnesium with various noble materials (graphite, platinum, 18/10 stainless steel) also dramatically increases its susceptibility to pitting, but only when chloride ions are present in the solution. Usual corrosion tests have confirmed these electrochemical results. A micrographic study of the pits has shown that their morphology is connected with the metallurgical state of the specimens. (author) [French] La corrosion par piqures du magnesium est etudiee a l'aide des courbes de polarisation potentiocinetiques en fonction des parametres suivants etat structural et composition du metal, concentration en chlorure et pH de la solution. De ces mesures electrochimiques on deduit qu'a pH 12, des la concentration 10{sup -3} M en NaCl, il existe un risque de corrosion localisee, tandis qu'a pH 13 une concentration cinq fois plus forte doit etre sans effet. Dans les memes conditions on montre que le couplage du magnesium avec differents elements nobles (graphite, platine, acier inoxydable 18/10) accroit fortement sa susceptibilite a l'attaque par piqures, excepte dans les solutions exemptes d'ions chlorures. Des essais classiques de corrosion dans les differentes solutions envisagees precedemment confirment les resultats de cette etude electrochimique. L'examen micrographique des piqures montre que leur morphologie est liee a l'etat metallurgique des echantillons. (auteur)

Des proprietes de l'etat normal du modele de Hubbard bidimensionnel

Science.gov (United States)

Lemay, Francois

Depuis leur decouverte, les etudes experimentales ont demontre que les supra-conducteurs a haute temperature ont une phase normale tres etrange. Les proprietes de ces materiaux ne sont pas bien decrites par la theorie du liquide de Fermi. Le modele de Hubbard bidimensionnel, bien qu'il ne soit pas encore resolu, est toujours considere comme un candidat pour expliquer la physique de ces composes. Dans cet ouvrage, nous mettons en evidence plusieurs proprietes electroniques du modele qui sont incompatibles avec l'existence de quasi-particules. Nous montrons notamment que la susceptibilite des electrons libres sur reseau contient des singularites logarithmiques qui influencent de facon determinante les proprietes de la self-energie a basse frequence. Ces singularites sont responsables de la destruction des quasi-particules. En l'absence de fluctuations antiferromagnetiques, elles sont aussi responsables de l'existence d'un petit pseudogap dans le poids spectral au niveau de Fermi. Les proprietes du modele sont egalement etudiees pour une surface de Fermi similaire a celle des supraconducteurs a haute temperature. Un parallele est etabli entre certaines caracteristiques du modele et celles de ces materiaux.

Silicon P.I.N. Junctions used for studies of radiation damage; Etude de l'irradiation aux neutrons rapides du silicium au moyen de jonctions P.I.N

Energy Technology Data Exchange (ETDEWEB)

Lanore, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-06-01

Irradiation of silicon P.I.N. junction has been studied primarily for the purpose of developing a radiation damage dosimeter, but also for the purpose of investigating silicon itself. It is known that the rate of recombination of electrons and holes is a linear function of defects introduced by neutron irradiation. Two methods have been used to measure that rate of recombination: forward characteristic measurements, recovery time measurements. In order to explain how these two parameters depend on recombination rate we have given a theory of the P.I.N. junction. We have also given an idea of the carrier lifetime dependence versus temperature. Annealing effects in the range of 70 to 700 K have also been studied, we found five annealing stages with corresponding activation energies. As an application for these studies, we developed a radiation damage dosimeter with which we made several experiments in facilities such as Naiade or Marias. (author) [French] L'irradiation de structures P.I.N. etait faite dans le but d'etudier principalement la mise au point d'un dosimetre a ''radiation damage'' et aussi pour etudier plus profondement le silicium lui-meme. On sait que le taux de recombinaison electrons-trous est une fonction lineaire du taux de defauts introduits par irradiation aux neutrons. Deux methodes ont ete utilisees pour atteindre ce taux de recombinaison: mesures de la caracteristique directe, mesures du temps de retournement. Pour expliquer de quelle facon ces parametres dependent du taux de recombinaison. Nous avons donne une theorie de la jonction P.I.N. Nous avons aussi donne l'allure des variations du temps de vie des porteurs en fonction de la temperature. Nous avons d'autre part effectue des recuits entre 70 et 700 K, domaine dans lequel nous avons trouve cinq etapes de ''guerison'' avec les energies d'activation correspondantes. En application de ces etudes nous avons mis ou point un dosimetre a ''radiation damage'' avec lequel nous avons effectue des

The accelerator tube of ions of the generator Van de Graaff of the CEA. Survey of development. First results; Le tube accelerateur d'ions du generateur van de graapp du commissariat. Etude de developpement. Premiers resultats

Energy Technology Data Exchange (ETDEWEB)

Bruck, H; Prevot, F [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

1953-07-01

Rare are the Van de Graaff supplies whose tube doesn't collapse electrically to tensions and currents very lower to those that the generator can provide. We chose the general measurements: length and diameter, and put the accent on the survey of the individual element, so much to the mechanical viewpoint (installation, solidity, tightness and degassing), that to the electric viewpoint (to increase the electric rigidity of it). After modification the breakdown voltage as well as the performances of the tube have been improved greatly. (M.B.) [French] Rares sont les machines de Van de Graaff dont le tube ne s'effondre pas electriquement a des tensions et des courants bien inferieurs a ceux que le generateur peut fournir. Nous avons choisi les dimensions generales: longueur et diametre, et mis l'accent sur l'etude de l'element individuel, tant au point de vue mecanique (montage, solidite, etancheite et degazage), qu'au point de vue electrique (pour en augmenter la rigidite electrique). Apres modification la tension de claquage ainsi que les performances du tube ont ete grandement ameliorees. (M.B.)

Original Paper Etude des effets vermicide et anti-diarrhéique du ...

African Journals Online (AJOL)

lisse intestinal qui serait due, soit à une inhibition de l'influx calcique, soit à une augmentation de l'efflux de calcium sans modification de l'influx ou même à une capture du Ca2+ libre cytoplasmique. Effet des concentrations croissantes du macéré aqueux des feuilles de Salvadora persica, L. sur la contracture induite par.

Folds and Etudes

Science.gov (United States)

Bean, Robert

2007-01-01

In this article, the author talks about "Folds" and "Etudes" which are images derived from anonymous typing exercises that he found in a used copy of "Touch Typing Made Simple". "Etudes" refers to the musical tradition of studies for a solo instrument, which is a typewriter. Typing exercises are repetitive attempts to type words and phrases…

A Study Of The Dilution Of Radio-Active Waste In The Rhone (1961); Etude de la dilution dans le rhone des effluents radioactifs du Centre de Marcoule (1961)

Energy Technology Data Exchange (ETDEWEB)

Rodier, J; Scheidhauer, J; Marichal, M; Court, R [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

1961-07-01

The discharge into the Rhone of liquid radio-active waste from the Marcoule Centre necessitates a large number of measurements, in particular chemical and radio-chemical analysis of the waste, itself and of the waters of the Rhone both above arid below the point of discharge. The results thus obtained during 1960 made it possible to evaluate the total amount of active waste discharged and its dilution in the receiving medium. A statistical study of the results of the analysis of the Rhone waters shows that a satisfactory dilution of the waste occurs rapidly; the experimental results obtained with an experimental discharge of rhodamine are thus confirmed. (authors) [French] Le rejet au Rhone des effluents radioactifs liquides produits sur le Centre de Marcoule donne lieu a un grand nombre de mesures et en particulier d'analyses chimiques et radio-chimiques des effluents eux-memes ainsi que des eaux du Rhone avant et apres rejet. Au cours de l'annee 1960, l'ensemble des resultats ainsi obtenus a permis de dresser un bilan des activites rejetees et de leur dispersion dans le milieu recepteur. Une etude statistique des resultats d'analyses des eaux du Rhone montre qu'une dilution satisfaisante des effluents s'effectue rapidement confirmant ainsi les resultats obtenus lors d'un rejet experimental de rhodamine. (auteurs)

Contribution to the study of internal friction in graphites; Contribution a l'etude du frottement interieur des graphites

Energy Technology Data Exchange (ETDEWEB)

Merlin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-03-01

A study has been made of the internal friction in different graphites between -180 C and +500 C using a torsion pendulum; the graphites had been previously treated thermo-mechanically, by neutron irradiation and subjected to partial annealings. It has been shown that there occurs: a hysteretic type dissipation of energy, connected with interactions between dislocations and other defects in the matrix; a dissipation having a partially hysteretic character which can be interpreted by a Granato-Luke type formalism and which is connected with the presence of an 'ultra-micro porosity'; a dissipation by a relaxation mechanism after a small dose of irradiation; this is attributed to the reorientation of bi-interstitials; a dissipation having the characteristics of a solid state transformation, this during an annealing after irradiation. It is attributed to the reorganization of interstitial defects. Some information has thus been obtained concerning graphites, in particular: their behaviour at low mechanical stresses, the nature of irradiation defects and their behaviour during annealing, the structural changes occurring during graphitization, the relationship between internal friction and macroscopic mechanical properties. (author) [French] L'etude du coefficient de frottement interieur au moyen d'un pendule de torsion entre -180 C et +500 C a ete realisee pour differents graphites apres des traitements thermo-mecaniques, des irradiations neutroniques et des guerisons partielles. Il a ete mis en evidence: une dissipation d'energie a caractere hysteretique, reliee aux interactions des dislocations avec les autres defauts de la matrice; une dissipation a caractere partiellement hysteretique, interpretable par un formalisme type Granato-Lucke et reliee a la presence d'une ''ultra-microporosite''; une dissipation par un mecanisme de relaxation, apres irradiation a faible dose, attribuee a la reorientation de di-interstitiels; une dissipation presentant les caracteristiques d

Observation of allotropic transformations of plutonium with a hot stage microscope; Etude des transformations allotropiques du plutonium au microscopic a platine chauffante

Energy Technology Data Exchange (ETDEWEB)

Mars, J; Spftiet, B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1965-07-01

A hot stage microscope designed for the examination of plutonium and its alloys is described. This apparatus was used to study the {alpha} {r_reversible} {beta} and {delta} {r_reversible} {epsilon} allotropic transformations of pure or {beta} and {delta} stabilised plutonium. The {alpha} {yields} {beta} transformation is typically a nucleation and growth process. Some particularities caused by the internal stresses due to the volume change during this transformation are examined. The kinetics has been studied as a function of these stresses and a temperature dependent activation energy for nucleation has been deduced. The {beta} {yields} {alpha} transformation presents a memory effect which implies an orientation relationship between the two phases. This fact is probably caused by the stresses created during the {beta} {yields} {alpha} transition. The {beta} {r_reversible} {gamma} and {delta} {r_reversible} {epsilon} transformations are also diffusion governed processes. (authors) [French] On decrit un microscope a platine chauffante permettant l'examen du plutonium et de ses alliages. Cet appareil a servi a l'etude des transformations {alpha} {r_reversible} {gamma} et {delta} {r_reversible} {epsilon} du plutonium pur ou stabilise en phase {beta} et {delta}. La transformation {alpha} {yields} {beta} est une transformation typique par germination et croissance; elle presente des caracteristiques bien particulieres qui sont dues aux contraintes internes qui prennent naissance au changement de volume a la transformation; la cinetique a ete etudiee en fonction de ces contraintes, et on en a deduit une energie d'activation pour la germination variable avec la temperature. La transformation {beta} {yields} {alpha} presente un effet de memoire qui suppose une relation d'orientation entre les deux phases; ce phenomene semble lie comme auparavant aux contraintes creees par le passage {beta} {yields} {alpha}. Les transformations {beta} {r_reversible} {gamma} et {delta} {r

Contribution to the study of the mechanism of extraction of uranyl chloride by long chain aliphatic amines; Contribution a l'etude du mecanisme d'extraction du chlorure d'uranyle par les amines aliphatiques a longues chaines

Energy Technology Data Exchange (ETDEWEB)

Rubinstein, G R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

After having studied and developed the mechanisms which may 'a priori' explain the extraction process (co-ordination, ion association or intermediate mechanism), experience shows that ion association only should be taken into consideration. The structure of the organic complex of uranyl chloride has been defined on the basis of the study of the variation of the distribution coefficient of uranium between the two phases at the equilibrium as a function of successively the activity of Cl{sup -} ions in the aqueous phase, the concentration of amine salt in the organic phase and finally of the concentration of uranium in the aqueous phase. The plotting of the results in bi-logarithmic co-ordinates enables us to propose the following formula for the extracted compound: UO{sub 2}Cl{sub 4}{sup --}(NR{sub 3}H{sup +}){sub 2}. The calculation of the equilibrium constant of formation of the organic compound of uranyl chloride has been possible in the case of diluted solutions of uranium only. (author) [French] Apres avoir expose et developpe les mecanismes qui a priori pouvaient expliquer le processus d'extraction (coordination, association d'ions ou mecanisme intermediaire), le recours a l'experience a finalement permis de ne retenir que l'association d'ions. La structure du complexe organique de chlorure d'uranyle a ete definie a partir de l'etude de la variation du coefficient de partage de l'uranium entre les deux phases a l'equilibre en fonction successivement de l'activite des ions Cl{sup -} en phase aqueuse, de la concentration de sel d'amine en phase organique et enfin de la concentration d'uranium de la phase aqueuse. La representation bilogarithmique des resultats de ces essais a permis de proposer la formule suivante pour le compose extrait: UO{sub 2}Cl{sub 4}{sup --}(NR{sub 3}H{sup +}){sub 2}. Le calcul de la constante d'equilibre de formation du compose organique de chlorure d'uranyle a ete seulement possible pour les solutions diluees en uranium. (auteur)

Etude sur les sources de la passion du Palatinus

NARCIS (Netherlands)

Maas, Paul Marie

1942-01-01

Notre étude sur la Passion du Palatinus étant terminée, nous voudrions ajouter un aperçu des principaux résultats obtenus. Quelque modestes qu'ils soient, nous espérons que ces résultats pouront contribuer à faire mieux comprendre les rapports obscurs qui existent entre notre Passion et ses sources

Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

Science.gov (United States)

Leger, Michel T.

recension des ecrits sur le changement de comportement en environnement. Nous explorons egalement la famille comme systeme fonctionnel de sorte a mieux comprendre ce contexte d'action environnementale qui est, a notre connaissance, peu etudie. Dans le deuxieme article, nous presentons nos resultats de recherche concernant les facteurs d'influence observes ainsi que les competences manifestees au cours du processus d'adoption de nouveaux comportements environnementaux dans trois familles. Enfin, le troisieme article presente les resultats du cas d'une quatrieme famille ou les membres vivent depuis longtemps des modes de vie ecologique. Dans le cadre d'une demarche d'analyse par theorisation ancree, l'etude de ce cas modele nous a permis d'approfondir les categories conceptuelles identifiees dans le deuxieme article de sorte a produire une modelisation de l'integration de comportements environnementaux dans le contexte de la famille. Les conclusions degagees grace a la recension des ecrits nous ont permis d'identifier les elements qui pourraient influencer l'adoption de comportements environnementaux dans des familles. La recension a aussi permis une meilleure comprehension des divers facteurs qui peuvent affecter l'adoption de comportements environnementaux et, enfin, elle a permis de mieux cerner le phenomene de changement de comportement dans le contexte de la famille consideree comme un systeme. En appliquant un processus d'analyse inductif, a partir de nos donnees qualitatives, les resultats de notre etude multi-cas nous ont indique que deux construits conceptuels semblent influencer l'adoption de comportements environnementaux en famille : 1) les valeurs biospheriques communes au sein de la famille et 2) les competences collectivement mises a profit collectivement durant l'essai de nouveaux comportements environnementaux. Notre modelisation du processus de changement dans des familles indique aussi qu'une dynamique familiale collaborative et la presence d'un groupe de

Etude du transfert thermique entre un jet rond turbulent et une paroi ...

African Journals Online (AJOL)

Dans ce travail, on s\\'intéresse à l\\'étude du transfert de chaleur d\\'une plaque plane soumise à l\\'action d\\'un jet d\\'air perpendiculaire. L\\'étude de la possibilité d\\'améliorer le transfert de chaleur est effectuée en fonction des paramètres caractéristiques de l\\'interaction jet - paroi. Le problème du jet rond turbulent frappant ...

Studies of iron carbon alloys; Contribution a l'etude des alliages dilues de carbone dans le fer {alpha}

Energy Technology Data Exchange (ETDEWEB)

Anagnostopoulos, T [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1971-07-01

Precipitation of carbon in {alpha} iron during a thermal treatment was followed using the magnetic after effect. A study was made of the influence of different parameters such as quenching speed, annealing rate, carbon concentration with or without impurity, irradiation effects. A transient sur-saturation occurs during dissolution of carbon in iron at 500 C. (author) [French] La precipitation du carbone dans le fer au cours d'un traitement thermique a ete suivie au moyen du trainage magnetique. L'etude de differents parametres tels que: vitesse de trempe, mode de recuit, concentration en carbone, presence d'impuretes, effet d'une irradiation, ont ete menes a bien. Un phenomene de sursaturation transitoire au cours de la remise en solution a 500 C a ete mis en evidence. (auteur)

Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

Energy Technology Data Exchange (ETDEWEB)

Rousset, P.; Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

Contribution to the study of the uranium-hydrogen system; Contribution a l'etude du systeme uranium-hydrogene

Energy Technology Data Exchange (ETDEWEB)

Chevallier, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-01-01

Previous work on uranium-hydrogen system is reviewed. The U-H{sub 2}-UH{sub n} equilibrium is then investigated at pressures below one atmosphere, i.e. at temperatures lower than 430 deg. C. The hydride obtained at equilibrium is deficient in hydrogen (UH{sub n<3}), the hydrogen deficit increasing as the temperature rises. Thermodynamic functions for the formation of non-stoichiometric hydride and of one hydrogen vacancy are derived from pressure composition isotherms, in U-H phase diagram is proposed. The hydrogenation of U-UC alloys is also examined at pressures below one atmosphere with regard to the equilibrium: (free U + UC) - H{sub 2}-UH{sub n}. The equilibrium conditions are found different from that observed for pure uranium. (author) [French] Une etude bibliographique du systeme uranium-hydrogene est exposee. L'equilibre U-H{sub 2}-UH{sub n} est ensuite etudie sous des pressions inferieures a une atmosphere, soit aux temperatures inferieures a environ 430 degs. C. L'hydrure obtenu a l'equilibre est deficitaire en hydrogene - UH{sub n<3} - et d'autant plus que la temperature s'eleve. Les grandeurs thermodynamiques relatives a la formation et a la saturation de l'hydrure, ainsi qu'a la formation d'une lacune d'hydrogene sont deduites des pressions d'equilibre. Un modele de diagramme de phases U-H est propose. L'hyduration des alliages U-UC est etudiee egalement sous des pressions inferieures a l'atmosphere, au point de vue de l'equilibre (U libre + UC) - H{sub 2}-UH{sub n}. Les conditions d'equilibre sont trouvees differentes de celles observees sur l'uranium pur. (auteur)

Alecto 2 - interaction studies; Alecto 2 - etudes d'interaction

Energy Technology Data Exchange (ETDEWEB)

Brunet, J P; Clouet d' Orval, Ch; Mougniot, J C; Penet, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

Weak interactions were experimentally studies with the tank of the critical assembly Alecto II and one, two or three bottles containing solutions of various concentrations. In particular, was studied the validity of certain classical assumptions, shielding effects, screening and semi-reflexion effects, importance of thermal coupling. The method of the 'k{sub eff}, solid angle' is shown to apply to such a system. The determination by divergence and pulsed neutron technique of the reactivity related to a millimeter of solution level affords the obtention of critical heights in terms of reactivity. (authors) [French] Une etude experimentale d'interactions faibles a ete faite entre la cuve de l'experience critique ALECTO II et une, deux ou trois bouteilles contenant des concentrations variees. On etudie, en particulier, la validite de certaines hypotheses classiques, effets d'ombre, d'ecrans, de semi-reflexion, importance du couplage thermique. On montre d'autre part que la methode du 'K{sub eff}, angle solide' peut s'appliquer a un tel systeme. La determination par divergence et neutrons pulses de la reactivite liee au millimetre de solution permet de traduire les hauteurs critiques obtenues, en terme de reactivite. (auteurs)

Oxidation of iron and steels by carbon dioxide under pressure (1962); Oxydation du fer et des aciers par l'anhydride carbonique sous pression (1962)

Energy Technology Data Exchange (ETDEWEB)

Colombie, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1962-07-01

After having developed one of the first thermo-balances to operate under pressure, we have studied the influence of the pressure on the corrosion of iron and steels by carbon dioxide. The corrosion was followed by three different methods simultaneously: by the oxidation kinetics, by micrographs, and by radiocrystallography. We have been able to show that the influence of the pressure is not negligible and we have provided much experimental evidence: oxidation kinetics, micrographic aspects, surface precipitation of carbon, metal carburization, the texture of the magnetite layer. All these phenomena are certainly modified by changes in the carbon dioxide pressure. In order to interpret most of our results we have been led to believe that the phenomenon of corrosion by CO{sub 2} depends on secondary reactions localised at the oxide-gas interface. This would constitute a major difference between the oxidation by CO{sub 2} and that by oxygen. (author) [French] Apres avoir etudie et mis au point une des premieres thermobalances fonctionnant sous pression, nous avons etudie l'influence de la pression sur la corrosion du fer et des aciers par l'anhydride carbonique. Notre etude a ete conduite simultanement sur trois plans differents: etude des cinetiques d'oxydation, etude micrographique et etude radiocristallographique. Nous avons pu montrer que l'influence de la pression n'etait pas negligeable et nous en avons fourni un faisceau de preuves experimentales important: cinetiques d'oxydation, aspect micrographique, precipitation superficielle de carbone, carburation du metal, texture de la couche de magnetite. Tous ces phenomenes sont sans aucun doute modifies par une variation de pression du gaz carbonique. Pour interpreter la plupart de nos resultats, nous avons ete conduits a penser que le phenomene de corrosion par CO{sub 2} etait tributaire de reactions secondaires localisees a l'interface oxyde-gaz. Ce serait la une des differences fondamentales entre l'oxydation par

Contribution to the study of the reduction of sulfate by the yolk sac of the chicken embryo; Contribution a l'etude de la reduction du sulfate par le sac vitellin de l'embryon de poulet

Energy Technology Data Exchange (ETDEWEB)

Bourgeois, Claude

1958-11-15

This academic reports addresses additional information obtained about the reduction of sulfate into sulphite by the yolk sac of a chicken embryo. Two important difficulties have been faced: the impossibility to isolate this reduction from reactions which immediately use the formed sulphite, and the impossibility to obtain an acellular preparation able to reduce the sulfate. Then, the problem of reduction of sulfate into sulphite by the yolk sac is associated with the problem of permeability of yolk sac cells to the studied substances. Thus, the author studied whether other animal species could provide a better material than the chicken embryo for this study of sulfate reduction. It appears that some vertebrate embryos present some evidence of sulphur metabolism similar to that of chicken embryo. However, this last one revealed to be the most favourable for the study. The author reports the study of the evolution of the reduction activity of the yolk sac sulfate with respect to the embryo age, and the effect of some metabolic inhibitors on this activity [French] Dans le present travail nous avons obtenu quelques renseignements concernant la reduction du sulfate en sulfite par l'embryon de poulet. Cette etude a ete menee, a l'aide de substances marquees par le soufre {sup 35}S, par les methodes qui avaient permis anterieurement a Chapeville et Fromageot de mettre en evidence cette reaction et les reactions qui lui font suite au cours de la synthese des aminoacides soufres. Pour apprecier la reduction du sulfate {sup 35}S, nous avons mesure la quantite d'acide cysteique {sup 35}S et de taurine {sup 35}S formes a partir du sulfite {sup 35}S. Appliquant ces techniques aux embryons d'especes animales variees, nous avons constate que quelques embryons de vertebres etaient capables d'utiliser le sulfite a la synthese d'acide cysteique: les embryons de roussette et de rat avec un rendement faible, l'embryon d'un passereau de la famille des turdides, comme celui du poulet

Contribution to the study of the thermal fission process for uranium 235 (1964); Contribution a l'etude du processus de la fission thermique de l'uranium 235 (1964)

Energy Technology Data Exchange (ETDEWEB)

Chahrtache, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-12-15

This report deals with the study of the distribution of the masses of the fragments produced by the disintegration of the U-236 nucleus, formed when a U-235 nucleus captures a thermal neutron. The experimental method chosen consists in the simultaneous measurement using p-n silicon junction detectors of the energies of the two fragments emitted in coincidence. This measurement is first made by a conditioned analysis of the energy of one of the fragments and then by a two dimensional analysis of the energies of the two fragments. Systematic results, are obtained concerning the distribution of the masses for different values of the total kinetic energy. The five structures appearing both for the mass distributions and for the energies of the fragments are studied and discussed. Generally speaking, our results are in agreement with those obtained by the time-of-flight method. (author) [French] Le present rapport a pour objet t'etude de la distribution des masses des fragments emis lors de la fission du noyau U-236, forme par capture d'un neutron thermique par un noyau d'U-235. La methode experimentale choisie consiste en la mesure simultanee - a l'aide de detecteurs a jonction p-n au silicium des energies des deux fragments emis en coincidence. Cette mesure est d'abord effectuee par analyse conditionnee de l'energie de l'un des fragments puis par analyse bidimensionnelle des energies des deux fragments. Des resultats systematiques sont obtenus sur les distributions des masses pour differentes valeurs de l'energie cinetique totale. Les 'structures fines' apparaissant tant sur les distributions des masses que sur celles des energies des fragments sont egalement etudiees et discutees. D'une facon generale, nos resultats sont en accord avec ceux obtenus par la methode du temps de vol. (auteur)

Study of the behaviour of organic carbon in the soil, and carbon 14 study of podzols; Contribution a l'etude du comportement du carbone organique dans le sol et etude des podzols a l'aide du carbone 14

Energy Technology Data Exchange (ETDEWEB)

Nakhla Shawki, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

Using the penetration into soil of carbon 14 of thermo-nuclear origin, the behaviour and renewal rate were studied on different organic fractions of the soil. It was established that 18% of the total organic matter is renewed in about 400 years. In addition the formation of podzol-type fossil soils in France was dated from the first millenary B.C., i.e. the end of the sub-boreal period and the beginning of the atlantic period. (author) [French] En utilisant la penetration dans le sol du carbone 14 d'origine thermonucleaire, on a etudie le comportement et la vitesse de renouvellement des differentes fractions de la matiere organique du sol. On a pu preciser que 18% de la matiere organique globale se renouvelait en 400 ans environ. Par ailleurs, la formation en France des sols fossiles du type podzol a ete datee du premier millenaire avant J.C. c'est a dire a la fin de la periode subboreale et au debut de la periode atlantique. (auteur)

Etude hyperfrequence et ultrasonore des supraconducteurs organiques kappa-(ET)(2)X (X = copper(thiocyanogen), copper[N(CN)(2)]bromine)

Science.gov (United States)

Frikach, Kamal

2001-09-01

Dans ce travail je presente une etude de l'impedance de surface, ainsi que de l'attenuation et la variation de la vitesse ultrasonores dans les etats normal et supraconducteur sur les composes organiques k-(ET)2X (X = Cu(SCN) 2, Cu[N(CN)2]Br). A partir des mesures d'impedance de surface, les deux composantes sigma 1 et sigma2 de la conductivite complexe sont extraites en utilisant le modele de Drude. Ces mesures montrent que la symetrie du parametre d'ordre dans ces composes est differente de celle du cas BCS. Afin de comprendre le profil de sigma1 (T) nous avons etudie les fluctuations supraconductrices a partir de la paraconductivite sigma'( T). Cette etude est rendue possible grace a la structure quasi-2D des composes k-(ET)2X dans lesquelles les fluctuations supraconductrices sont fortes. Ces dernieres sont observees sur deux decades de temperatures dans le Cu(SCN)2. L'application du modele de Aslamazov-Larkin 2D et 3D montre la possibilite du passage du regime 2D a haute temperature au regime 3D au voisinage de Tc. En se basant sur ce resultat, nous avons calcule la paraconductivite en utilisant une approche a l'ordre d'une boucle a partir du modele de Lawrence-Doniach. En tenant compte de la correction par la self energie dans la limite dynamique (17 GHz), l'ajustement de la paraconductivite calculee est en bon accord avec les donnees experimentales. Le couplage interplan obtenu est compatible avec le caractere quasi-2D des composes organiques. Le temps de relaxation des quasi-particules dans l'etat supraconducteur est ensuite extrait pour la premiere fois dans ces composes dont le comportement en fonction de la temperature est compatible avec la presence des noeuds dans le gap. Dans l'etat normal, la variation de la vitesse ultrasonore presente un comportement anormal caracterise par un fort ramollissement a T = 38 K et 50 K dans k-(ET) 2Cu(SCN)2 et k-(ET)2Cu[N(CN) 2]Br respectivement dont l'amplitude est independante du champ magnetique jusqu'a H = Hc 2

Criticality studies; Etudes de criticite

Energy Technology Data Exchange (ETDEWEB)

Breton, D; Lecorche, P; Clouet d' Orval, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

de calcul destinees a resoudre les problemes de securite nucleaire poses par les installations chimiques et metallurgiques. I - Les etudes experimentales ont porte depuis 1958 sur des milieux homogenes composes d'un sel fissile dissous dans l'eau legere. Mises au point sur le reacteur PROSERPINE, les experiences ont ete poursuivies a Saclay sur les assemblages ALECTO ou des solutions de plutonium ou d'uranium enricni a 90 p.100 peuvent etre rendues critiques. Les resultats deja obtenus portent sur les masses critiques de cuves cylindriques de diametre variable entre 20 et 50 cm, reflechies de maniere diverse (eau, beton...) a des concentrations allant jusqu'a 100 g/l. Des mesures physiques (spectres, bruits de pile) et d'interaction completent les resultats obtenus. D'autres experiences portant sur des solutions de plutonium ont ete entreprises en 1963 au Centre de Valduc. Elles portent sur l'etude de masses critiques de reservoirs annulaires de diametre exterieur 50 cm et de diametre interieur variable entre 10 et 30 cm. Ces reservoirs peuvent etre reflechis par de l'eau independamment interieurement et exterieurement. Deux de ces reservoirs ont ete etudies en interaction, pour diverses configurations. D'autres experiences ont porte sur des plaques de diverses epaisseurs. II - Les etudes entreprises ont permis la mise au point de methodes de calcul qui ont ete eprouvees sur plusieurs experiences. Les possibilites de calcul reposant sur la methode du transport et sur la methode de Monte Carlo ont ete particulierement exploitees. Toutes ces etudes theoriques sont appliquees dans la conception et le controle des installations industrielles sur le plan de la surete. (auteurs)

Use of radioactive tracers in studying the transport of solids in watercourses; Emploi de traceurs radioactifs pour l'etude du transport solide dans les cours d'eau; Ispol'zovanie radioaktivnykh indikatorov dlya izucheniya peremeshcheniya tverdykh chastits v vodnykh potokakh; Empleo de indicadores radiactivos para el estudio del transporte de solidos en las corrientes de agua

Energy Technology Data Exchange (ETDEWEB)

Courtois, G [Centre d' Etudes Nucleaires de Saclay (France); Jaeery, P; Heuzel, M [Laboratoire National d' Hydraulique de Chatou (France)

1962-01-15

The National Hydraulics Laboratory which, in collaboration with the Saclay Nuclear Research Centre, has for several years been devising equipment and techniques for the study of sediment movements by the radioactive tracer method, is now endeavouring to develop a really quantitative method of research. Two river experiments were recently made, the first a study of shingle drifting in the Rhone, the second a study of sand movement in the Niger. The latter experiment was matched by identical experiments carried out on a scale model of the River Niger which the Chatou Laboratory has at its disposal. The experiments used Mn{sup 56} and Na{sup 24} radiation obtained by direct activation of crushed apricot stone, this representing in the scale model the natural sediment of the Niger bed. The Chatou Laboratory and the Saclay Nuclear Study Centre are at present both devoting attention to the application of radioactive tracers in studies with scale models, with the twin aims of: (a) Obtaining a single research tool for use under natural conditions and with scale models in order to gauge the trustworthiness of the model, in the calibration testing stage; (b) Taking advantage of the facilities for direct observation and measurement offered by scale models in order to study prospects of improving the tracer method, with a view particularly to securing quantitative data. (author) [French] Le Laboratoire national d'hydraulique, qui depuis quelques annees a developpe, en collaboration avec le Centre d'etudes nucleaires de Saclay, les appareillages et les techniques d'etudes des mouvements de sediments par la methode des traceurs radioactifs, s'efforce actuellement de mettre au point un moyen d'investigation veritablement quantitatif. Deux experiences ont ete effectuees recemment en riviere, la premiere a ete consacree a l'etude du charriage des galets dans le Rhone, l'autre a l'etude des transports de sables dans le Niger. Cette derniere experience a ete doublee d

Plutonium extraction by the formation of insoluble salts (1960); Extraction du plutonium par formation de sels insolubles (1960)

Energy Technology Data Exchange (ETDEWEB)

Ganivet, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1960-06-15

The aim of this work is to convert Pu IV nitrate in solution into an insoluble salt. Three methods have been studied: 1) the conventional oxalic acid method was improved; 2) precipitation with 8-hydroxyquinoline was tried; 3) the hydrogen peroxide method was adapted to the eluates of the ionic resins from Marcoule. The yield from the oxalic process has been increased (loss of Pu in the mother-liquor brought from 200 mg/l to 20 mg/l). The study of Pu IV precipitation by 8-hydroxyquinoline has shown that the yield is excellent (Pu concentration in the mother-liquor less than 5 mg/h), but decontamination from impurities is nil. Finally, experiments on the precipitation by hydrogen peroxide of Pu IV solutions at the concentrations normally obtained from the anionic resins at Marcoule have given us good yields (Pu concentration in the mother-liquor less than 7 mg/l), and the purification is better than that obtained by oxalic acid (1000 ppm total impurities after a precipitation). (author) [French] L'objet de l'etude est la transformation en sel insoluble du nitrate de Pu IV en solution. Trois procedes ont ete etudies: 1) la methode classique a l'acide oxalique a ete amelioree, 2) la precipitation a la 8-hydroxyquinoleine a ete essayee; 3) le procede a l'eau oxygenee a ete adapte aux solutions d'elution des resines anion de Marcoule. Le rendement du procede oxalique a ete augmente (perte en Pu dans les eaux-meres ramenee de 200 mg/l a 20 mg/l). L'etude de la precipitation du Pu IV par la 8-hydroxyquinoleine a montre que le rendement etait excellent (concentration du Pu dans les eaux-meres inferieure a 5 mg/l), mais la decontamination en impuretes est nulle. Enfin, l'etude et l'application de la precipitation par l'eau oxygenee de solutions de Pu IV de concentrations habituellement obtenues a la sortie des resines anion a Marcoule nous ont permis d'obtenir un bon rendement (concentration de Pu dans les eaux-meres inferieure a 7 mg/l); la purification est meilleure que

Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

Science.gov (United States)

Bendaoud, Adlane Larbi

Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

Tunnel diode amplifiers and their background noise as a function of the polarization point, the temperature, and the bandwidth; Amplificateurs a diode tunnel et leur bruit de fond, en fonction du point de polarisation, de la temperature et de la bande passante

Energy Technology Data Exchange (ETDEWEB)

Ozveaminian, K [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

The author presents mathematical and graphical methods for the study of the stability of tunnel diode circuits. He gives an application to the realization of three amplifiers. Then he describes a theoretical and experimental investigation of the noise of these amplifiers and of its variations with the bias, the temperature and the bandwidth. (author) [French] L'auteur presente deux methodes, l'une theorique l'autre graphique, pour l'etude de la stabilite des circuits a diode tunnel, dont il fait une application a la realisation de trois amplificateurs. Il effectue ensuite une etude theorique et experimentale du bruit de fond de ces amplificateurs, en fonction du point de polarisation, de la temperature et de la bande passante. (auteur)

Etudes optiques de nouveaux materiaux laser: Des orthosilicates dopes a l'ytterbium: Le yttrium (lutetium,scandium) pentoxide de silicium

Science.gov (United States)

Denoyer, Aurelie

La decouverte et l'elaboration de nouveaux materiaux laser solides suscitent beaucoup d'interet parmi la communaute scientifique. En particulier les lasers dans la gamme de frequence du micron debouchent sur beaucoup d'applications, en telecommunication, en medecine, dans le domaine militaire, pour la, decoupe des metaux (lasers de puissance), en optique non lineaire (doublage de frequence, bistabilite optique). Le plus couramment utilise actuellement est le Nd:YAG dans cette famille de laser, mais des remplacants plus performants sont toujours recherches. Les lasers a base d'Yb3+ possedent beaucoup d'avantages compares aux lasers Nd3+ du fait de leur structure electronique simple et de leur deterioration moins rapide. Parmi les matrices cristallines pouvant accueillir l'ytterbium, les orthosilicates Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5 se positionnent tres bien, du fait de leur bonne conductivite thermique et du fort eclatement de leur champ cristallin necessaire a l'elaboration de lasers quasi-3 niveaux. De plus l'etude fine et systematique des proprietes microscopiques de nouveaux materiaux s'avere toujours tres interessante du point de vue de la recherche fondamentale, c'est ainsi que de nouveaux modeles sont concus (par exemple pour le champ cristallin) ou que de nouvelles proprietes inhabituelles sont decouvertes, menant a de nouvelles applications. Ainsi d'autres materiaux dopes a l'ytterbium sont connus pour leurs proprietes de couplage electron-phonon, de couplage magnetique, d'emission cooperative ou encore de bistabilite optique, mais ces proprietes n'ont encore jamais ete mises en evidence dans Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5. Ainsi, cette these a pour but l'etude des proprietes optiques et des interactions microscopiques dans Yb:Y2SiO 5, Yb:Lu2SiO5 et Yb:Sc2SiO5. Nous utilisons principalement les techniques d'absorption IR et de spectroscopie Raman pour determiner les excitations du champ cristallin et les modes de vibration dans le materiau

Spherical Indentation Techniques for Creep Property Evaluation Considering Transient Creep

Energy Technology Data Exchange (ETDEWEB)

Lim, Dongkyu; Kim, Minsoo; Lee, Hyungyil [Sogang Univ., Seoul, (Korea, Republic of); Lee, Jin Haeng [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-11-15

Creep through nanoindentations has attracted increasing research attention in recent years. Many studies related to indentation creep tests, however, have simply focused on the characteristics of steady-state creep, and there exist wide discrepancies between the uniaxial test and the indentation test. In this study, we performed a computational simulation of spherical indentations, and we proposed a method for evaluating the creep properties onsidering transient creep. We investigated the material behavior with variation of creep properties and expressed it using regression equations for normalized variables. We finally developed a program to evaluate the creep properties considering transient creep. By using the proposed method, we successfully obtained creep exponents with an average error less than 1.1 and creep coefficients with an average error less than 2.3 from the load-depth curve.

Spherical Indentation Techniques for Creep Property Evaluation Considering Transient Creep

International Nuclear Information System (INIS)

Lim, Dongkyu; Kim, Minsoo; Lee, Hyungyil; Lee, Jin Haeng

2013-01-01

Creep through nanoindentations has attracted increasing research attention in recent years. Many studies related to indentation creep tests, however, have simply focused on the characteristics of steady-state creep, and there exist wide discrepancies between the uniaxial test and the indentation test. In this study, we performed a computational simulation of spherical indentations, and we proposed a method for evaluating the creep properties onsidering transient creep. We investigated the material behavior with variation of creep properties and expressed it using regression equations for normalized variables. We finally developed a program to evaluate the creep properties considering transient creep. By using the proposed method, we successfully obtained creep exponents with an average error less than 1.1 and creep coefficients with an average error less than 2.3 from the load-depth curve

Creep properties of discontinuous fibre composites with partly creeping fibres

International Nuclear Information System (INIS)

Bilde-Soerensen, J.B.; Lilholt, H.

1977-05-01

In a previous report (RISO-M-1810) the creep properties of discontinuous fibre composites with non-creeping fibres were analyzed. In the present report this analysis is extended to include the case of discontinuous composites with partly creeping fibres. It is shown that the creep properties of the composite at a given strain rate, epsilonsub(c), depend on the creep properties of the matrix at a strain rate higher than epsilonsub(c), and on the creep properties of the fibres at epsilonsub(c). The composite creep law is presented in a form which permits a graphical determination of the composite creep curve. This can be constructed on the basis of the matrix and the fibre creep curves by vector operations in a log epsilon vs. log sigma diagram. The matrix contribution to the creep strength can be evaluated by a simple method. (author)

The accelerator tube of ions of the generator Van de Graaff of the CEA. Survey of development. First results; Le tube accelerateur d'ions du generateur van de graapp du commissariat. Etude de developpement. Premiers resultats

Energy Technology Data Exchange (ETDEWEB)

Bruck, H.; Prevot, F. [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

1953-07-01

Rare are the Van de Graaff supplies whose tube doesn't collapse electrically to tensions and currents very lower to those that the generator can provide. We chose the general measurements: length and diameter, and put the accent on the survey of the individual element, so much to the mechanical viewpoint (installation, solidity, tightness and degassing), that to the electric viewpoint (to increase the electric rigidity of it). After modification the breakdown voltage as well as the performances of the tube have been improved greatly. (M.B.) [French] Rares sont les machines de Van de Graaff dont le tube ne s'effondre pas electriquement a des tensions et des courants bien inferieurs a ceux que le generateur peut fournir. Nous avons choisi les dimensions generales: longueur et diametre, et mis l'accent sur l'etude de l'element individuel, tant au point de vue mecanique (montage, solidite, etancheite et degazage), qu'au point de vue electrique (pour en augmenter la rigidite electrique). Apres modification la tension de claquage ainsi que les performances du tube ont ete grandement ameliorees. (M.B.)

Analcite formation in the Agades Region (Niger); Les formations a analcime de la Region d'Agades (Republique du Niger)

Energy Technology Data Exchange (ETDEWEB)

NONE

1966-06-01

A study based mainly upon field mapping and drill cores examination, followed by a laboratory survey allows us to support a genetic hypothesis upon the formation of analcime in the 'Continental intercalaire' of Agades (Niger). Analcime could be generated from an early diagenesis of argillaceous sediments influenced by high soda content fossil waters inside confined continental sedimentary basins. (authors) [French] Une etude axee essentiellement sur des leves de terrain et des carottes de sondages, suivie d'une etude en laboratoire, permet d'avancer une hypothese genetique sur les formations a analcime du Continental Intercalaire d'AGADES (Niger). L'analcime resulterait d'une diagenese precoce de sediments argileux, sous l'influence d'eaux connees riches en soude, dans des bassins sedimentaires continentaux confines.

Rapport final de la Collaboration CERN-CNRS pour la construction du LHC Accord Technique d'Exécution No 2 Cryostats et assemblage des sections droites courtes (SSS) du LHC

CERN Document Server

Bergot, JB; Poncet, A; Rohmig, P; Roy, E; Vincent, D

2006-01-01

Depuis 1995 et suite à la signature du protocole de Collaboration, le CERN, le CEA et le CNRS ont étroitement collaboré dans le cadre de la contribution exceptionnelle de la France à la construction du LHC. Pour le CNRS, l'Institut de Physique Nucléaire d'Orsay a pris en charge deux Accords Techniques d'Exécution. Le premier concerne la conception et l'assemblage des Sections Droites Courtes de la machine, et le deuxième, l'étalonnage des thermomètres cryogéniques du LHC. Dans le cadre de l'Accord Technique d'Exécution N°2, le Bureau d'Etudes de la Division Accélérateur de l'IPNO et le groupe AT-CRI du CERN ont travaillé de concert pour mener à bien la conception des SSS (Short Straight Section) et de tous les équipements nécessaires à l'assemblage. Ce rapport a donc pour objectif de dresser, en termes d'historique, d'organisation, de résultats quantitatifs et qualitatifs et de moyens mis en ?uvre, un tableau aussi complet que possible du déroulement de cette Collaboration entre le CERN e...

The use and evolution of the CEA research reactors; Utilisation et evolution des reacteurs de recherche du C.E.A

Energy Technology Data Exchange (ETDEWEB)

Rossillon, F; Chauvez, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

reacteurs en montrant ce qu'a ete jusqu'a present leur utilisation, et comment certaines modifications ont permis de les adapter a l'evolution des programmes. Ils precisent egalement les raisons qui ont conduit a l'elaboration du projet de la nouvelle pile OSIRIS, La pile ZOE, la plus ancienne du CEA, est en service au Centre de Fontenay-aux-Roses depuis 1948. Elle est principalement utilisee pour les mesures de section efficace d'absorption du graphite, et pour diverses irradiations de courte duree ne necessitant que des flux peu eleves. La Pile EL2, en service depuis 1952, a permis les premieres etudes liees au refroidissement par gaz. Elle a ete tres utilisee pour la production des radioisotopes et pour de nombreuses experiences de physique, de metallurgie et de physico-chimie - le vieillissement de certaines parties du reacteur a conduit a decider l'arret prochain de cette installation. La Pile EL. 3 a ete tres utilisee pour les experiences de physique et pour l'etude des combustibles. L'adoption d'une nouvelle structure pour le coeur (solution 'Cristal de neige') va permettre d'accroitre considerablement les possibilites de la pile pour les irradiations en neutrons rapides. La pile TRITON-I, piscine de 2 MW, est surtout utilisee pour les irradiations en neutrons rapides et en gamma. Certaines modifications, actuellement en cours, permettront d'accroitre la puissance du reacteur jusqu'a 4 ou 5 MW. Dans un compartiment voisin de TRITON-I est implantee la Pile TRITON-II, de meme structure generale, mais dont la puissance maximum est de 100 kW. TRITON-II est utilisee exclusivement pour les etudes de protections. MELUSINE, pile piscine de 2 MW est en fonctionnement au Centre d'Etudes Nucleaires de Grenoble depuis 1959. Elle a permis l'execution d'un programme important concernant surtout la physique du solide, l'etude fondamentale de combustibles refractaires et de graphites speciaux, et l'etude du comportement des liquides organiques sous radiations. Les installations de

Some particular aspects of control in nuclear power reactors; Quelques aspects particuliers du controle dans les piles atomiques de puissance

Energy Technology Data Exchange (ETDEWEB)

Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Pupponi, J [Electricite de France (EDF), 75 - Paris (France)

1964-07-01

There are still many problems in the field of measurement and control of neutron flux. The present studies in connexion with high flux reactors contribute to the solution of these problems which concern specialists in reactor control. The present state of this investigation and the results of different studies carried out in France by the C A and the EDF are pointed out: A - In the nuclear instrumentation field, work is at present devoted to the technologies used to develop detectors and cables, which have to work at high temperature and in a high {gamma} background; fast electronic techniques are applied to fission counters to measure low neutron fluxes in a high {gamma} background (10 Rh). B - In the control and safety field, there is a real need for studies on the behaviour of reactors in the subcritical state. This increases the margin of security during restarts when poison effects must be overcome The perturbations due to control rod movements necessitate a new organisation of power level safety and control assemblies, in connexion with thermal or activation measurements. Two methods of fast start-up are described. They are related to the fission rate measurement as a function of time. This is done either continuously by a constant and high reactivity change, or step by step. The application of automatic techniques to detector motion seems to give the answer to control and safety in normal start-up. C - The scope of these studies covers the methods used for the control of E.D.F. 3, which are described. (authors) [French] La mesure et le controle du flux neutronique dans les piles de puissance posent encore de nombreux problemes. Les etudes actuellement entreprises dans le domaine des piles a haut flux, doivent apporter une contribution importante a la solution de ces problemes qui interessent les specialistes du controle des piles de puissance. On analyse l'etat actuel de ces etudes et on donne les resultats des differents travaux effectues en France, dans

Silicon P.I.N. Junctions used for studies of radiation damage; Etude de l'irradiation aux neutrons rapides du silicium au moyen de jonctions P.I.N

Energy Technology Data Exchange (ETDEWEB)

Lanore, J. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-06-01

Irradiation of silicon P.I.N. junction has been studied primarily for the purpose of developing a radiation damage dosimeter, but also for the purpose of investigating silicon itself. It is known that the rate of recombination of electrons and holes is a linear function of defects introduced by neutron irradiation. Two methods have been used to measure that rate of recombination: forward characteristic measurements, recovery time measurements. In order to explain how these two parameters depend on recombination rate we have given a theory of the P.I.N. junction. We have also given an idea of the carrier lifetime dependence versus temperature. Annealing effects in the range of 70 to 700 K have also been studied, we found five annealing stages with corresponding activation energies. As an application for these studies, we developed a radiation damage dosimeter with which we made several experiments in facilities such as Naiade or Marias. (author) [French] L'irradiation de structures P.I.N. etait faite dans le but d'etudier principalement la mise au point d'un dosimetre a ''radiation damage'' et aussi pour etudier plus profondement le silicium lui-meme. On sait que le taux de recombinaison electrons-trous est une fonction lineaire du taux de defauts introduits par irradiation aux neutrons. Deux methodes ont ete utilisees pour atteindre ce taux de recombinaison: mesures de la caracteristique directe, mesures du temps de retournement. Pour expliquer de quelle facon ces parametres dependent du taux de recombinaison. Nous avons donne une theorie de la jonction P.I.N. Nous avons aussi donne l'allure des variations du temps de vie des porteurs en fonction de la temperature. Nous avons d'autre part effectue des recuits entre 70 et 700 K, domaine dans lequel nous avons trouve cinq etapes de ''guerison'' avec les energies d'activation correspondantes. En application de ces etudes nous avons mis ou point un

Study of transfer reactions ({alpha},t), ({alpha},{sup 3}He) in the f-p shell: mechanism and spectroscopic use; Etude des reactions de transfert ({alpha},t), ({alpha},{sup 3}He) dans la couche f-p mecanisme et utilisation spectroscopique

Energy Technology Data Exchange (ETDEWEB)

Roussel, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-05-01

We describe an experimental study of ({alpha},t), ({alpha},{sup 3}He) reactions at 44 MeV using a solid-state identifier, on the target-nuclei {sup 54}Fe and {sup 58,60,62,64}Ni. A critical study of optical model and of disturbed wave analysis has been performed. We show the complementarity of different transfer-reactions, the ambiguity of spectroscopic factors, the importance of the problem of the reaction mechanism. (author) [French] On decrit une etude experimentale des reactions ({alpha},t), ({alpha},{sup 3}He) a 44 MeV utilisant un systeme identificateur de particules sur les noyaux-cibles {sup 54}Fe et {sup 58,60,62,64}Ni. Une etude critique de modele optique et d'analyse en ondes deformees (D.W.B.A.) a ete entreprise. On montre la complementarite des differentes reactions de transfert, l'ambiguite des facteurs spectroscopiques, l'importance du probleme du mecanisme. (auteur)

Study of High-Resolution Spectroscopy of Plutonium. Part I. Contribution to the Classification of the Arc Spectrum. Part II. Determination of the Magnetic Moment of {sup 239}Pu; Etude du plutonium par spectroscopie a haute resolution: contribution a la classification du spectre d'arc et determination du moment magnetique de {sup 239}Pu

Energy Technology Data Exchange (ETDEWEB)

Gerstenkorn, S

1962-07-01

The study of the hyperfine structure and isotope shift enabled the positions of the first five levels of the multiplet {sup 7}F{sub 0-6} belonging to the fundamental configuration 5f{sup 6}7s{sup 2} to be determined. The classification of the arc spectrum begun in this way led to 25 odd levels, the number of classified lines (70) representing about 30 p. 100 of the light emitted by this hollow cathode in the visible. In addition, the isotope shifts of many lines and the data given by the King furnace show that the first levels of the configuration 5f{sup 5}6d7s{sup 2} are also low less than 8000 cm{sup -1} above the fundamental level {sup 7}F{sub 0}. The proximity of the configuration f{sup 6}s{sup 2} and f{sup 5}ds{sup 2} shows that the bonding energies of the 5f and 6d electrons are of the same order of magnitude and this fact must be responsible for the multiple valences belonging to plutonium. From the hyperfine structure of spark lines (Pu II) the interval factor a{sub 7} for the electron was deduced giving for the calculated nuclear moment of {sup 239}Pu a value of +0.21 {+-}0.06 {mu}{sub N}. The position of the hyperfine components show that the nuclear moment is positive, although the theoretical value given by B. R. Mottelson and S. Nillson is negative and equal to -0.1 {mu}{sub N}. (author) [French] Partie 1 - L'etude des structures hyperfines et du deplacement isotopique des raies du spectre d'arc du plutonium a permis de determiner la position des cinq premiers niveaux du multiplet {sup 7}F{sub 0-6} correspondant a la configuration fondamentale 5f{sup 6}7s{sup 2}. Des lors, la classification du spectre d'arc du plutonium pouvait etre amorcee: 25 niveaux impairs ont ete mis en evidence et le nombre de raies classees (70) represente environ 30 p. 100 de l'intensite totale du spectre d'arc emis par une cathode creuse dans le visible. D'autre part, le deplacement isotopique de certaines raies, joint aux renseignements donnes par le spectre emis par le four

Ecology of Acantharia and Strontium Circulation in the Sea; Ecologie des Acanthaires et Circulation du Strontium en Mer; 0411 0414 ; Ecologia de los Acantarios y Circulacion del Estroncio en el Mar

Energy Technology Data Exchange (ETDEWEB)

Schreiber, Bruno [Department of Zoology, University of Parma (Italy)

1960-07-01

The author first considers the biochemical cycle of strontium in sea-water and then examines the proposed programme and the objectives it is hoped to achieve. The Acantharia group was selected for this study since it is the only one which has a specific and exclusive deposit of strontium. It is, therefore, of particular interest in relation to the problems concerning the circulation of strontium and radioactive isotopes resulting from fall-out. (author) [French] L'auteur procede d'abord a une etude du cycle bio-chimique du strontium dans l'eau de mer, puis il procede a l'etude du programme envisage et des objectifs poursuivis. Les Acanthaires ont ete choisis pour cette etude car ils constituent le seul groupe possedant un depot de strontium specifique et exclusif. Il est donc particulierement interessant een ce qui concerne les problemes relatifs a la circulation du strontium et des isotopes radioactifs provenant des retombees. (author) [Spanish] El autor estudia primero el ciclo bioquimico del estroncio en las aguas del mar, y procede luego al estudio del programa proyectado y de los objetivos perseguidos. Para realizar este estudio se ha escogido a los acantarios porque su esqueleto contiene estroncio. Por ello, este grupo es de especial interes en lo que respecta a los problemas de la circulacion del estroncio y de los radioisotopos procedentes de las precipitaciones radiactivas. (author) [Russian] Prezhde vsego avtor opisyvaet biohimicheskij cikl stroncija v morskoj vode, a zatem perehodit k rassmotreniju planiruemoj programmy i presleduemyh celej. Dlja jetogo issledovanija byla vybrana akantarija (Acantharia), tak kak ona javljaetsja edinstvennoj gruppoj, imejushhej specificheskie i edinstvennye v svoem rode otlozhenija stroncija. Takim obrazom, ona javljaetsja krajne interesnoj v otnoshenii problem, svjazannyh s cirkuljaciej stroncija i radioaktivnyh izotopov, poluchaemyh v rezul'tate vypadenija osadkov. (author)

Heat exchanges during the re-flooding of a water reactor core - within the framework of the 'reference accident'; Echanges thermiques lors du renoyage d'un coeur de reacteur a eau - dans le cadre de 'l'accident de reference'

Energy Technology Data Exchange (ETDEWEB)

Andreoni, Daniel

1975-11-28

After a brief presentation of reported studies made in different countries and regarding the so-called 'reference accident', this research thesis reports the study of reactor re-flooding when the reactor is completely dried and heating elements have reached a temperature between 300 and 900 C, with a constant water flow rate entering the test section, with a constant dissipated electrical power, and by using very simple geometries. After a first part addressing the experimental study, the author reports the development of conduction calculation codes used to compute the flow extracted by the two-phase flow, present the thermal-hydraulic code used to compute local values and to study the correlation of the upstream area exchange coefficient. The author finally reports an analysis of the different existing models and the study of a re-flooding model [French] La presente etude est consacree a l'un des aspects de la surete des reacteurs a eau sous pression, et plus precisement a l'accident tres important qui consiste en une perte de fluide caloporteur (Loss of Coolant Accident - 'LOCA'). Le but de l'etude est de fournir des renseignements necessaires a l'interpretation des experiences effectuees sur des grappes, de donner une correlation de coefficient d'echange dans la zone aval, et de donner aussi un modele de progression du front de trempe pour les analyses de surete. Une etude bibliographique preliminaire nous a permis de faire le point sur les experiences entreprises concernant le refroidissement de secours. Ensuite, les chapitres suivants seront decrits: 1) Le chapitre II, consacre a l'etude experimentale (boucle, sections d'essais, resultats globaux). 2) Le chapitre III ou seront presentes les codes de calcul de conduction, necessaires au calcul du flux extrait par le melange diphasique, le code de thermohydraulique necessaire au calcul des grandeurs locales et l'etude de la correlation du coefficient d'echange de la zone aval. 3) Enfin le chapitre IV ou, apres

Consistent creep and rupture properties for creep-fatigue evaluation

International Nuclear Information System (INIS)

Schultz, C.C.

1978-01-01

The currently accepted practice of using inconsistent representations of creep and rupture behaviors in the prediction of creep-fatigue life is shown to introduce a factor of safety beyond that specified in current ASME Code design rules for 304 stainless steel Class 1 nuclear components. Accurate predictions of creep-fatigue life for uniaxial tests on a given heat of material are obtained by using creep and rupture properties for that same heat of material. The use of a consistent representation of creep and rupture properties for a mininum strength heat is also shown to provide adequate predictions. The viability of using consistent properties (either actual or those of a minimum heat) to predict creep-fatigue life thus identifies significant design uses for the results of characterization tests and improved creep and rupture correlations

Creep behaviour and creep mechanisms of normal and healing ligaments

Science.gov (United States)

Thornton, Gail Marilyn

Patients with knee ligament injuries often undergo ligament reconstructions to restore joint stability and, potentially, abate osteoarthritis. Careful literature review suggests that in 10% to 40% of these patients the graft tissue "stretches out". Some graft elongation is likely due to creep (increased elongation of tissue under repeated or sustained load). Quantifying creep behaviour and identifying creep mechanisms in both normal and healing ligaments is important for finding clinically relevant means to prevent creep. Ligament creep was accurately predicted using a novel yet simple structural model that incorporated both collagen fibre recruitment and fibre creep. Using the inverse stress relaxation function to model fibre creep in conjunction with fibre recruitment produced a superior prediction of ligament creep than that obtained from the inverse stress relaxation function alone. This implied mechanistic role of fibre recruitment during creep was supported using a new approach to quantify crimp patterns at stresses in the toe region (increasing stiffness) and linear region (constant stiffness) of the stress-strain curve. Ligament creep was relatively insensitive to increases in stress in the toe region; however, creep strain increased significantly when tested at the linear region stress. Concomitantly, fibre recruitment was evident at the toe region stresses; however, recruitment was limited at the linear region stress. Elevating the water content of normal ligament using phosphate buffered saline increased the creep response. Therefore, both water content and fibre recruitment are important mechanistic factors involved in creep of normal ligaments. Ligament scars had inferior creep behaviour compared to normal ligaments even after 14 weeks. In addition to inferior collagen properties affecting fibre recruitment and increased water content, increased glycosaminoglycan content and flaws in scar tissue were implicated as potential mechanisms of scar creep

Consistent creep and rupture properties for creep-fatigue evaluation

International Nuclear Information System (INIS)

Schultz, C.C.

1979-01-01

The currently accepted practice of using inconsistent representations of creep and rupture behaviors in the prediction of creep-fatigue life is shown to introduce a factor of safety beyond that specified in current ASME Code design rules for 304 stainless steel Class 1 nuclear components. Accurate predictions of creep-fatigue life for uniaxial tests on a given heat of material are obtained by using creep and rupture properties for that same heat of material. The use of a consistent representation of creep and rupture properties for a minimum strength heat is also shown to provide reasonable predictions. The viability of using consistent properties (either actual or those of a minimum strength heat) to predict creep-fatigue life thus identifies significant design uses for the results of characterization tests and improved creep and rupture correlations. 12 refs

Design of creep machine and creep specimen chamber for carrying out creep tests in flowing liquid sodium

Energy Technology Data Exchange (ETDEWEB)

Ravi, S., E-mail: sravi@igcar.gov.in; Laha, K.; Sakthy, S.; Mathew, M.D.; Jayakumar, T.

2014-02-15

Highlights: • Design of a lever type creep machine for carrying out creep test in flowing sodium. • Leveling of lever during creep was achieved by automated movement of fulcrum. • Design of creep chamber for providing constant sodium flow rate across creep specimen. • Minimum use of bellow in chamber for sodium containment and mechanical isolation. • Mini-lever mechanism to counter balance load reduction on specimen due to bellow stiffness. - Abstract: A creep testing system has been designed, fabricated, installed and validated for carrying out creep tests in flowing liquid sodium. The testing system consists of two sections namely creep testing machine and an environmental chamber. The testing system has the ability of (i) applying tensile load to the test specimen through a lever, (ii) monitoring continuously the creep elongation and (iii) allowing sodium to flow around the creep specimen at constant velocity. The annular space between the creep specimen and the environmental chamber has been suitably designed to maintain constant sodium flow velocity. Primary and secondary bellows are employed in the environmental chamber to (i) mechanically isolate the creep specimen, (ii) prevent the flowing sodium in contact with air and (iii) maintain an argon gas cover to the leaking sodium if any from primary bellow, with a provision to an alarm get activated by a spark plug. The lever-horizontality during creep test has been maintained by automatically lifting up the fulcrum instead of lowering down the pull rod as conventionally used. A mini lever mechanism has been incorporated in the load train to counter balance the load reduction on specimen from the changing stiffness of the bellows. The validation of the testing system has been established by carrying out creep tests on 316L(N) stainless steel at 873 K over a wide stress range and comparing the results with those obtained in air by employing the developed and conventional creep testing machines.

Les sulfures dans les filons Sn-W de Panasqueira (Portugal). Approche du problème de l'argent.

OpenAIRE

Pirard, Eric

1984-01-01

Etude des paragenèses minérales de la mine de Panasqueira. Microanalyses des sulfures. Pistes pour améliorer la récupération de l'argent dans les installations de traitement du minerai. Pavonite, Schapbachite, Mathildite. Detailed study of mineral parageneses in the Panasqueira ore deposit. Microanalysis of sulphide phases. Suggestions for better recovery of silver in the mineral processing plant. Pavonite, Schapbachite, Mathildite.

Etude s?ro-?pid?miologique de la leishmaniose canine au centre du Maroc

OpenAIRE

Fellah, Hajiba; Doughmi, Oursula; Maniar, Sa?d; Lalami, Abdelhakim El Ouali

2014-01-01

Dans le monde, la leishmaniose visc?rale humaine est connue pour avoir comme principale source d'infection les Canid?s domestiques et sauvages. Au centre du Maroc, les donn?es ?pid?miologiques, cliniques et parasitologiques sur la leishmaniose canine, sont quasiment inexistantes. Ce travail traite une ?tude prospective au cours de laquelle 61 s?rums canins ont ?t? analys?s par un test rapide et par l'immunofluorescence indirecte. La sensibilit? du test rapide par rapport ? celle de l'immunofl...

Etude expérimentale et analyse probabiliste du comportement à la ...

African Journals Online (AJOL)

DK

en traction de composites verre-perlon-acrylique à usage orthopédique. Experimental ... du comportement à la rupture de ces stratifiés ainsi que l'aspect probabiliste de cette dernière sont décrits .... signification physique qui donne au volume.

Creep and creep-rupture behavior of Alloy 718

International Nuclear Information System (INIS)

Brinkman, C.R.; Booker, M.K.; Ding, J.L.

1991-01-01

Data obtained from creep and creep-rupture tests conducted on 18 heats of Alloy 718 were used to formulate models for predicting high temperature time dependent behavior of this alloy. Creep tests were conducted on specimens taken from a number of commercial product forms including plate, bar, and forgoing material that had been procured and heat treated in accordance with ASTM specifications B-670 or B-637. Data were obtained over the temperature range of 427 to 760 degree C ad at test times to about 87,000 h. Comparisons are given between experimental data and the analytical models. The analytical models for creep-rupture included one based on lot-centering regression analysis and two based on the Minimum Commitment Method. A ''master'' curve approach was used to develop and equation for estimating creep deformation up to the onset of tertiary creep. 11 refs., 13 figs

Mineralogical and geochemical investigation of the Oligocene sedimentary series of Saint-Agoulin; Etude mineralogique et geochimique de la serie sedimentaire oligocene de Saint-Agoulin

Energy Technology Data Exchange (ETDEWEB)

Mohadjer, K [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires, direction des productions; Faculte des Sciences de l' Universite de Paris, 75 (France)

1967-07-05

The mineralogical investigation is based on determination of the amounts of quartz, clays, feldspars and on grain size analysis. A distinction was established between two lithological groups: the lower group with dominant silica the upper with dominant carbonates. Clays of the two groups are comparable with dominant illite, and accessory kaolinite and montmorillonite. The amounts of the elements Si, Al, Fe, Ca, Mg, Na, K, Ti, Mn, P, Ba, Sr, Rb, Pb, Cu, Ni, Co, V, Be, B, Zr, U, were determined by several analytical methods: chemistry, X ray fluorescence, spectrography and fluorimetry. Correlations between the chemical elements and the mineralogical components were computed and plotted. Lastly the conditions of filling up of the basin are defined, taking into account the Oligocene climatic conditions. (author) [French] L'etude mineralogique est basee sur les dosages du quartz, de la calcite, des argiles, des feldspaths et sur les granulometries. On a distingue 2 familles lithologiques: l'une riche en quartz dans la partie inferieure, l'autre riche en carbonate dans la partie superieure. Les argiles des 2 familles sont comparables: illite predominante, kaolinite et montmorillonite accessoires. Les elements: Si, Al, Fe, Ca, Mg, Na, K, Ti, Mn, P, Ba, Sr, Rb, Pb, Cu, Ni, Co, V, Be, B, Zr, U, ont ete doses par differentes methodes d'analyse: analyse chimique, fluorescence X, spectrographie et fluorimetrie. Une etude de correlation entre les elements chimiques et les constituants mineralogiques a ete realisee. Enfin, les conditions de remplissage du Bassin sont definies, en tenant compte du contexte climatique oligocene. (auteur)

The synthesis and spectroscopic study of stable free radicals related to piperidine-n-oxyl, including a stable bi-radical; Syntheses et etudes spectroscopiques de radicaux libres piperidiniques et d'un biradical stable, du type nitroxyde

Energy Technology Data Exchange (ETDEWEB)

Briere, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires, Laboratoire de chimie organique physique

1967-06-01

A new synthesis of di-tert-butyl nitroxide using the reaction between tert-butyl magnesium chloride and nitro-tert-butane is presented in the first section. Synthesis and investigation of stable free piperidine-N-oxyl radicals are described in the second section. All these nitroxides have been characterised by their I. R., U. V. and E. P. R. absorption spectra. The final section contains a description of the synthesis of a stable bi-radical of the nitroxide type by condensation of 2,2, 6, 6-tetramethyl-piperid-4-one-l-oxyl with hydrazine. (author) [French] La premiere partie expose une nouvelle methode de synthase du di-t-butyl nitroxyde, par action d'halogenures de t-butyl magnesium sur le nitro-t-butane (Rdt maximum 45 pour cert, purete 86 pour cent). Une etude de radicaux. libres stables pipericliniques est faite dans une seconde partie. Ces composes sont obtenus par oxydation de derives de la triacetonamine. Les caracteristiques spectroscopiques ultra-violette, infra-rouge, et paramagnetique electronique de ces radicaux sont donnees. La grande inertie chimique du groupement nitroxyde a permis la syn-these d'un biradical stable par formation d'azine d'une cetone radicalaire, ce qui fait 1'objet de la troisieme partie. (auteur)

Description of Concrete Creep under Time-Varying Stress Using Parallel Creep Curve

OpenAIRE

Park, Yeong-Seong; Lee, Yong-Hak; Lee, Youngwhan

2016-01-01

An incremental format of creep model was presented to take account of the development of concrete creep due to loading at different ages. The formulation was attained by introducing a horizontal parallel assumption of creep curves and combining it with the vertical parallel creep curve of the rate of creep method to remedy the disadvantage of the rate of creep method that significantly underestimates the amount of creep strain, regardless of its simple format. Two creep curves were combined b...

Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

Energy Technology Data Exchange (ETDEWEB)

Lambert, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-11-15

The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

Energy Technology Data Exchange (ETDEWEB)

Lambert, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-11-15

The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

A mathematical model for cost of maritime transport. Application to competitiveness of nuclear vessels; Modele mathematique du cout de transport maritime application a la competitivite du navire nucleaire

Energy Technology Data Exchange (ETDEWEB)

Dorval, C [Commissariat a l' Energie Atomique, 75 - Paris (France)

1966-05-01

In studying the competitiveness of a nuclear merchant vessel, economic assessments in terms of figures were discarded in favor of a simplified model, which gives a clearer idea of the mechanism of the comparison between alternative vessels and the particular influence of each parameter. An expression is formulated for the unit cost per ton carried over a given distance as a function of the variables (speed and deadweight tonnage) and is used to determine the optima for conventional and nuclear vessels. To represent the freight market involved in the optimization studies, and thus in the competitiveness computation, two cases are taken into account: the tonnage to be carried annually is limited, and the tonnage to be carried annually is not limited. In both cases the optima are calculated and compared for a conventional and a nuclear vessel. Competitiveness curves are plotted as a function of the ratios of nuclear and conventional fuel costs and nuclear and conventional marginal power costs. These curves express the limiting values of the above two ratios for which the transport costs of the nuclear and conventional vessels are equal. The competitiveness curves vary considerably according to the hypothesis adopted for the freight market and the limit of tonnage carried annually. (author) [French] Pour etudier la competitivite du navire marchand nucleaire, plutot que de nous livrer a des evaluations economiques chiffrees, discutables dans l'etat actuel des etudes, nous utilisons un modele simplifie permettant de mieux saisir le mecanisme de la comparaison des navires et l'influence particuliere de chaque parametre. Nous etablissons une expression du cout unitaire de la tonne transportee sur un parcours donne en fonction des variables vitesse et port en lourd. Et nous l'utilisons pour determiner les optima des navires classiques et nucleaires. Pour representer le marche du fret qui intervient dans les etudes d'optimisation, et donc dans la recherche de la

Etude de la magnetoresistance du compose supraconducteur YB a2 ...

African Journals Online (AJOL)

00 ;0,01 ; 0,03 ; 0,06 ; 0,10 ; 0,20 ; 0,25) ont été élaborés par la méthode de réaction à l'état solide. L'effet de différents cycles de recuit sur la substitution du cuivre par le titane dans l'YBCO a été faite à travers des mesures de résistivité ...

Etude des facteurs de risque du retard de croissance intra-utérin à Lubumbashi

Science.gov (United States)

Moyambe, Jules Ngwe Thaba; Bernard, Pierre; Khang'Mate, Faustin; Nkoy, Albert Mwembo Tambwe A; Mukalenge, Faustin Chenge; Makanda, Daudet; Twite, Eugene; Ndudula, Arthur Munkana; Lubamba, Cham; Kadingi, Arnauld Kabulu; Kayomb, Mutach; Kayamba, Prosper Kalenga Muenze

2013-01-01

Introduction Dans notre milieu, il n'existe aucune politique de prévention du Retard de Croissance Intra-Utérin (RCIU) clairement défini. L'objectif de ce travail était d'identifier les facteurs de risque de RCIU afin de proposer une stratégie de lutte contre cette pathologie en agissant surtout sur des facteurs pouvant faire l'objet d'une action préventive. Méthodes Une étude cas-témoins a été menée dans 11 centres hospitaliers de Lubumbashi en République Démocratique du Congo, de Janvier 2010 à Juin 2011, dans le but d'identifier les facteurs de risque du retard de croissance intra-utérin (RCIU). Au total 420 gestantes (cas et témoins) avec grossesse monofoetale d'au moins 24 semaines d'aménorrhée ont été inclues dans l'étude. Les cas correspondaient aux gestantes dont le poids du fœtus était resté inférieur au 10 eme percentile des courbes de référence d'Alexander, après 2 échographies successives réalisées à intervalle de 4 semaines. Les témoins correspondaient aux gestantes dont le poids du fœtus était supérieur ou égal au 10 eme percentile de mêmes courbes. A chaque cas a été apparié un témoin de même parité porteur d'une grossesse de même âge. Résultats L'analyse univariée a identifié comme facteurs de risque: la taille maternelle. Conclusion L'amélioration du niveau socio-économique des populations, la lutte contre le paludisme et les consultations prénatales mieux organisées couplées à une meilleure éducation sanitaire et nutritionnelle peuvent contribuer sensiblement à la réduction de la fréquence du RCIU à Lubumbashi. PMID:23504392

Supply for the ejection magnets of the beam of Saturne. Comparison between several solutions; Alimentation des aimants d'ejection du faisceau de Saturne. Comparaisons entre plusieurs solutions

Energy Technology Data Exchange (ETDEWEB)

Pillet, E.

1957-07-01

A brief study of three possible systems leads to the choice of a motor-dynamo group with a low time constant. The partial use of a battery of accumulators or of a delay line seems to have no economic or technical advantages. (author) [French] Une etude rapide de trois dispositifs possibles, conduit a preferer un groupe moteur-dynamo a faible constante de temps. L'emploi partiel d'une batterie d'accumulateurs ou d'une ligne a retard ne semble avantageux ni du point de vue economique, ni du point de vue technique. (auteur)

Magnetic study of solid uranium-fluorine complexes; Contribution a l'etude magnetique de composes fluores solides de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Dianoux, A J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-06-01

les difficultes d'interpretation du paramagnetisme des fluorures d'uranium, dans lesquels l'ion uranium est place dans un site de basse symetrie. L'etude theorique du magnetisme de l'ion U{sub V} dans les fluorures complexes du type M{sub 3}UF{sub 8} (M = NH{sub 4}, Na, Rb, Cs) conduit a interpreter les resultats experimentaux par une deformation trigonale de l'entourage a huit fluors de l'uranium. L'utilisation du formalisme de l'hamiltonien de spin et un emploi systematique de la theorie des groupes permettent de presenter les calculs de la susceptibilite d'une maniere concise. L'etude de la resonance et de la relaxation des fluors, dans des fluorures complexes d'uranium VI pulverulents, suggere un modele structural pour le compose NaUF{sub 7}. Nous montrons que la forme des raies d'absorption de resonance magnetique est dominee par la presence d'importants deplacements chimiques anisotropes. Dans le modele que nous proposons, six fluors sont lies a l'uranium par des liaisons a fort caractere de covalence, dans un octaedre UF{sub 6} deforme, le septieme fluor restant ionique. L'etude de la relaxation longitudinale des fluors confirme l'existence d'un mouvement de rotation de l'octaedre, l'energie d'activation etant de 0.46 eV. (auteur)

Contribution to the development of a gamma radiation camera for use in scintigraphy; Contribution a l'etude et a la realisation d'une camera a rayonnement gamma en vue d'une application a la scintigraphie

Energy Technology Data Exchange (ETDEWEB)

Felix, J [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1969-10-01

This report constitutes an attempt to study systematically the properties of the detection head of a multichannel collimating grid camera. The object has been to show the disadvantages of present equipment, and to propose possible solutions for overcoming them: firstly by improving the methods used for collecting data, and the performances of the equipment doing the collecting; secondly by devising methods for processing the data so as to reduce image distortion and, first of all, the astigmatism due to the collimator. The first part deals with the study of the formation of the image by means of the collimating grid, the second with the examination of many systems which could be used for acquiring data. The last part summarizes the experiments carried out and proposes an experimental programme for the development of a prototype. (author) [French] Ce rapport constitue une tentative d'etude systematique des proprietes de la tete de detection d'une camera a grille collimatrice multicanal. Le but de cette etude est de souligner les inconvenients des dispositifs actuels et d'esquisser des solutions propres a y remedier: premierement, par l'amelioration du mode d'acquisition des donnees et des performances du sous-ensemble charge de cette acquisition; deuxiemement, par la recherche de methodes de traitement des donnees propres a reduire les distorsions de l'image et en premier lieu l'astigmatisme du au collimateur. La premiere partie en est devolue a l'etude de la formation de l'image par l'intermediaire de la grille collimatrice, la seconde a l'examen de nombreux systemes utilisables pour l'acquisition des donnees. La derniere partie resume les experiences effectuees et propose un programme de manipulations utiles a l'elaboration d'un prototype d'appareil. (auteur)

Nanoindentation creep versus bulk compressive creep of dental resin-composites.

Science.gov (United States)

El-Safty, S; Silikas, N; Akhtar, R; Watts, D C

2012-11-01

To evaluate nanoindentation as an experimental tool for characterizing the viscoelastic time-dependent creep of resin-composites and to compare the resulting parameters with those obtained by bulk compressive creep. Ten dental resin-composites: five conventional, three bulk-fill and two flowable were investigated using both nanoindentation creep and bulk compressive creep methods. For nano creep, disc specimens (15mm×2mm) were prepared from each material by first injecting the resin-composite paste into metallic molds. Specimens were irradiated from top and bottom surfaces in multiple overlapping points to ensure optimal polymerization using a visible light curing unit with output irradiance of 650mW/cm(2). Specimens then were mounted in 3cm diameter phenolic ring forms and embedded in a self-curing polystyrene resin. Following grinding and polishing, specimens were stored in distilled water at 37°C for 24h. Using an Agilent Technologies XP nanoindenter equipped with a Berkovich diamond tip (100nm radius), the nano creep was measured at a maximum load of 10mN and the creep recovery was determined when each specimen was unloaded to 1mN. For bulk compressive creep, stainless steel split molds (4mm×6mm) were used to prepare cylindrical specimens which were thoroughly irradiated at 650mW/cm(2) from multiple directions and stored in distilled water at 37°C for 24h. Specimens were loaded (20MPa) for 2h and unloaded for 2h. One-way ANOVA, Levene's test for homogeneity of variance and the Bonferroni post hoc test (all at p≤0.05), plus regression plots, were used for statistical analysis. Dependent on the type of resin-composite material and the loading/unloading parameters, nanoindentation creep ranged from 29.58nm to 90.99nm and permanent set ranged from 8.96nm to 30.65nm. Bulk compressive creep ranged from 0.47% to 1.24% and permanent set ranged from 0.09% to 0.38%. There was a significant (p=0.001) strong positive non-linear correlation (r(2)=0.97) between bulk

Creep strength and rupture ductility of creep strength enhanced ferritic steels

Energy Technology Data Exchange (ETDEWEB)

Kushima, Hideaki; Sawada, Kota; Kimura, Kazuhiro [National Inst. for Materials Science, Tsukuba, Ibaraki (Japan)

2010-07-01

Creep strength and rupture ductility of Creep Strength Enhanced Ferritic (CSEF) steels were investigated from a viewpoint of stress dependence in comparison with conventional low alloy ferritic creep resistant steels. Inflection of stress vs. time to rupture curve was observed at 50% of 0.2% offset yield stress for both CSEF and conventional ferritic steels. Creep rupture ductility tends to decrease with increase in creep exposure time, however, those of conventional low alloy steels indicate increase in the long-term. Creep rupture ductility of the ASME Grades 92 and 122 steels indicates drastic decrease with decrease in stress at 50% of 0.2% offset yield stress. Stress dependence of creep rupture ductility of the ASME Grades 92 and 122 steels is well described by stress ratio to 0.2% offset yield stress, regardless of temperature. Drop of creep rupture ductility is caused by inhomogeneous recovery at the vicinity of prior austenite grain boundary, and remarkable drop of creep rupture ductility of CSEF steels should be derived from those stabilized microstructure. (orig.)

Etude linguistique chez les Baráshi/Banyaambo du Rwanda

African Journals Online (AJOL)

User

ont quitté le Nkóle et ont gagné le Mutára, puis le Mubarí qui est une large bande frontalière située au nord du lac Ihema jouxtant la région tanzanienne de Karágwe. Puis le mouvement s'est poursuivi vers le sud, ce qui explique donc la présence aujourd'hui d'une communauté Baráshi/Banyaambo au. Gisaká autour des ...

Contribution to the study of the mechanism of extraction of uranyl chloride by long chain aliphatic amines; Contribution a l'etude du mecanisme d'extraction du chlorure d'uranyle par les amines aliphatiques a longues chaines

Energy Technology Data Exchange (ETDEWEB)

Rubinstein, G.R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

After having studied and developed the mechanisms which may 'a priori' explain the extraction process (co-ordination, ion association or intermediate mechanism), experience shows that ion association only should be taken into consideration. The structure of the organic complex of uranyl chloride has been defined on the basis of the study of the variation of the distribution coefficient of uranium between the two phases at the equilibrium as a function of successively the activity of Cl{sup -} ions in the aqueous phase, the concentration of amine salt in the organic phase and finally of the concentration of uranium in the aqueous phase. The plotting of the results in bi-logarithmic co-ordinates enables us to propose the following formula for the extracted compound: UO{sub 2}Cl{sub 4}{sup --}(NR{sub 3}H{sup +}){sub 2}. The calculation of the equilibrium constant of formation of the organic compound of uranyl chloride has been possible in the case of diluted solutions of uranium only. (author) [French] Apres avoir expose et developpe les mecanismes qui a priori pouvaient expliquer le processus d'extraction (coordination, association d'ions ou mecanisme intermediaire), le recours a l'experience a finalement permis de ne retenir que l'association d'ions. La structure du complexe organique de chlorure d'uranyle a ete definie a partir de l'etude de la variation du coefficient de partage de l'uranium entre les deux phases a l'equilibre en fonction successivement de l'activite des ions Cl{sup -} en phase aqueuse, de la concentration de sel d'amine en phase organique et enfin de la concentration d'uranium de la phase aqueuse. La representation bilogarithmique des resultats de ces essais a permis de proposer la formule suivante pour le compose extrait: UO{sub 2}Cl{sub 4}{sup --}(NR{sub 3}H{sup +}){sub 2}. Le calcul de la constante d'equilibre de formation du compose organique de chlorure d

Processing of data issued from {gamma} spectrometer. Application to the study of decay schemes; Traitement des informations issues d'un spectrometre {gamma}. Application a l'etude de schemas de desintegration

Energy Technology Data Exchange (ETDEWEB)

Boulanger, J P; Legrand, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

The main purpose of the following report is the study of a generation method of {gamma} spectra corresponding to any energy, from a library of some basic spectra. Then we point out how to establish the decay scheme of a radio-nuclide, in using an accurate analysis of full-energy peaks which appear in its complex spectrum, followed by a generation of plain spectra corresponding to the energies of the different transitions, and ending with a least-squares fitting procedure of the complex spectrum. The accuracy of the process is examined comparing the calculated spectra to the ones issued from two kinds of spectrometers (Na I(Tl) and Ge(Li)). The method is then applied to the study of {sup 134}Cs and {sup 95}Zr - {sup 95}Nb. (authors) [French] Le present rapport a pour principal objet l'etude d'une methode de generation de spectres {gamma} correspondant a n'importe quelle energie, a partir d'une bibliotheque de quelques spectres de reference. On montre ensuite comment on peut etablir le schema de desintegration d'un radionucleide, a l'aide d'une analyse precise des pics d'absorption totale apparaissant dans son spectre complexe, suivie d'une generation des spectres simples correspondant aux energies des diverses transitions, et en terminant par une decomposition du spectre complexe par la methode des moindres carres. On examine la validite du procede en comparant les spectres calcules a ceux obtenus avec deux types de detecteurs (scintillateurs et semi-conducteurs). On applique alors la methode a l'etude du {sup 134}Cs et du {sup 95}Zr - {sup 95}Nb. (auteurs)

Study of the artificial radioactivity of the marine medium using gamma spectrometry (1962-1966); Etude de la radioactivite artificielle du milieu marin par spectrometrie gamma (1962-1966)

Energy Technology Data Exchange (ETDEWEB)

Chesselet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

incidences de cette retombee dans les eaux marines superficielles. Considerant les radioelements etudies comme des 'traceurs' dans le milieu marin, divers processus physiques, chimiques ou biologiques ont ete etudies par spectrometrie gamma a haute sensibilite. Le passage en phase soluble dans l'eau de mer d'une fraction importante (environ 50 pour cent) de l'activite liee aux poussieres radioactives, phenomene qui n'etait pas previsible pour les radioelements etudies, gouverne les processus d'accumulation dans la biomasse planctonique et la diffusion vers les eaux plus profondes. Par ailleurs, une methode de spectrometrie 'in situ' permettant de mesurer directement dans la mer de tres faibles concentrations en certains radionuclides emetteurs gamma est decrite. L'application de cette methode a permis de nombreuses observations dans les eaux de surface de la Mediterranee occidentale et du Golfe de Gascogne. On montre quo la profondeur de melange est etroitement liee a celle de la thermocline. Un processus d'accumulation au niveau de celle-ci est constate. Les coefficients de diffusion sont voisins du coefficient de diffusion thermique turbulente. L'existence de compartiments qui subsistent pendant plusieurs mois dans la masse des eaux de surface du Golfe de Gascogne est mise en evidence. Grace aux bilans effectues, une etude comparative montre que le taux de retombees radioactives sur les surfaces maritimes est toujours deux a trois fois superieur a celui sur les regions continentales voisines. Diverses explications de ce phenomene sont discutees. (auteur)

Study of the artificial radioactivity of the marine medium using gamma spectrometry (1962-1966); Etude de la radioactivite artificielle du milieu marin par spectrometrie gamma (1962-1966)

Energy Technology Data Exchange (ETDEWEB)

Chesselet, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

atmospherique entre 1962 et 1964 et les incidences de cette retombee dans les eaux marines superficielles. Considerant les radioelements etudies comme des 'traceurs' dans le milieu marin, divers processus physiques, chimiques ou biologiques ont ete etudies par spectrometrie gamma a haute sensibilite. Le passage en phase soluble dans l'eau de mer d'une fraction importante (environ 50 pour cent) de l'activite liee aux poussieres radioactives, phenomene qui n'etait pas previsible pour les radioelements etudies, gouverne les processus d'accumulation dans la biomasse planctonique et la diffusion vers les eaux plus profondes. Par ailleurs, une methode de spectrometrie 'in situ' permettant de mesurer directement dans la mer de tres faibles concentrations en certains radionuclides emetteurs gamma est decrite. L'application de cette methode a permis de nombreuses observations dans les eaux de surface de la Mediterranee occidentale et du Golfe de Gascogne. On montre quo la profondeur de melange est etroitement liee a celle de la thermocline. Un processus d'accumulation au niveau de celle-ci est constate. Les coefficients de diffusion sont voisins du coefficient de diffusion thermique turbulente. L'existence de compartiments qui subsistent pendant plusieurs mois dans la masse des eaux de surface du Golfe de Gascogne est mise en evidence. Grace aux bilans effectues, une etude comparative montre que le taux de retombees radioactives sur les surfaces maritimes est toujours deux a trois fois superieur a celui sur les regions continentales voisines. Diverses explications de ce phenomene sont discutees. (auteur)

Deformation by grain boundary sliding and slip creep versus diffusional creep

International Nuclear Information System (INIS)

Ruano, O A; Sherby, O D; Wadsworth, J.

1998-01-01

A review is presented of the debates between the present authors and other investigators regarding the possible role of diffusional creep in the plastic flow of polycrystalline metals at low stresses. These debates are recorded in eleven papers over the past seventeen years. ln these papers it has been shown that the creep rates of materials in the so-called diffusional creep region are almost always higher than those predicted by the diffusional creep theory. Additionally, the predictions of grain size effects and stress exponents from diffusional creep theory are often not found in the experimental data. Finally, denuded zones have been universally considered to be direct evidence for diffusional creep; but, those reported in the literature are shown to be found only under conditions where a high stress exponent is observed. Also, the locations of the denuded zones do not match those predicted. Alternative mechanisms are described in which diffusion-controlled dislocation creep and/or grain boundary sliding are the dominant deformation processes in low-stress creep. It is proposed that denuded zones are formed by stress-directed grain boundary migration with the precipitates dissolving in the moving grain boundaries. The above observations have led us to the conclusion that grain boundary sliding and slip creep are in fact the principal mechanisms for observations of plastic flow in the so-called diffusional creep regions

Creep in ceramics

CERN Document Server

Pelleg, Joshua

2017-01-01

This textbook is one of its kind, since there are no other books on Creep in Ceramics. The book consist of two parts: A and B. In part A general knowledge of creep in ceramics is considered, while part B specifies creep in technologically important ceramics. Part B covers creep in oxide ceramics, carnides and nitrides. While covering all relevant information regarding raw materials and characterization of creep in ceramics, the book also summarizes most recent innovations and developments in this field as a result of extensive literature search.

Experimental study of the hydrodynamic instabilities occurring in boiling-water reactors; Etude experimentale des instabilites hydrodynamiques survenant dans les reacteurs nucleaires a ebullition

Energy Technology Data Exchange (ETDEWEB)

Fabreca, S [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-10-01

convection naturelle et en convection forcee avec by-pass du canal d'essai. L'etude comporte 3 parties: 1. L'etablissement prealable des lois de la perte de pression en ebullition. 2. La determination des frontieres d'apparition de l'oscillation, dans une gamme tres large des parametres intervenant. 3. Une etude descriptive des oscillations et la mesure des periodes. Les frontieres de l'oscillation sont fournies en convection naturelle et en convection forcee pour diverses valeurs de la perte de charge singuliere a l'entree du canal et pour differentes longueurs de cheminee. Les resultats sont presentes sous une forme adimensionnelle valable en premiere approximation quelles que soient l'echelle geometrique et la nature du fluide. Enfin on a constate les particularites suivantes: - la paroi (nature et epaisseur) peut jouer un role important; - l'oscillation est possible en canal horizontal. (auteur)

Contribution to the study of corrosion of zirconium and zircaloy-2 in superheated steam at 400 deg C (105 kg /cm{sup 2}); Contribution a l'etude de la corrosion du zirconium et du zircaloy-2 dans la vapeur d'eau surchauffee a 400 deg C (105 kg /cm{sup 2})

Energy Technology Data Exchange (ETDEWEB)

Coriou, H; Gauduchau, J; Grall, L; Hure, J; Pelras, M [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

The corrosion kinetics of zircaloy-2 in water and steam at temperatures between 300 deg. C and 400 deg. C are represented by a curve sharply divided into two stages separated by a so-called transition point. After a first period of decreasing corrosion rate there follows a second period with much faster kinetics in which the speed is constant. After carrying out a methodical study of the corrosion of 'zircaloy-2 in the form of sheets and tubes. We have demonstrated, at 400 deg. C in steam, a systematic anomaly which appears at the transition point. The curve presents three quite distinct points; after the first period a fast corrosion is observed, followed by a third period at a slower speed. This leads us to believe that there may be not a single point but a transition zone, separating two types of kinetic behaviour and corresponding to modifications in the properties of the oxide layer. After this readjustment period a new corrosion law is established, lasting a considerable time, the corrosion speed being slower than that indicated so far. A study of the morphology of the oxide films which develop under these conditions has demonstrated the special part played by mechanical, physical and metallurgical factors in the case of zirconium. Deep penetration of oxide can thus show up on the inner wall of hammer-hardened tubes. Simultaneously a very considerable hydride formation occurs in the metal. (author) [French] La cinetique de corrosion du zircaloy-2 dans l'eau et la vapeur a des temperatures comprises entre 300 et 400 deg. C est representee par une courbe a deux periodes separees par un point singulier appele point de transition. A une premiere periode a vitesse de corrosion decroissante, succede une deuxieme periode a cinetique beaucoup plus rapide dont la vitesse est constante. Apres une etude systematique de la corrosion du zircaloy-2 sous forme de toles et de tubes, nous avons mis en evidence a 400 deg. C, dans la vapeur, une anomalie systematique qui se

Polarographic study of the electrochemical properties of plutonium; Etude polarographique des proprietes electrochimiques du plutonium

Energy Technology Data Exchange (ETDEWEB)

Guichard, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

The behaviour of the different degrees of oxidation of plutonium have been studied using a falling drop mercury electrode in a non-complexing medium: dilute perchloric acid. In this medium it is possible to carry out the polarographic determination of plutonium using the reduction step situated at - 0.54 V/ECS which corresponds to the passage from the degree of oxidation(V) to the degree(III). The modifications brought about by a complexing ion, acetate, are then observed and interpreted. The existence of two plutonium(IV) acetic complexes has been shown; one is a polymerized substance. (author) [French] Le comportement des differents degres d'oxydation du plutonium est etudie a l'electrode a gouttes de mercure dans un milieu non complexant: l'acide perchlorique dilue. Il est possible dans ce milieu d'effectuer le dosage polarographique du plutonium en utilisant la vague de reduction situee a - 0.54 V/ECS qui correspond au passage du degre d'oxydation(V) au degre(III). Les modifications apportees par un ion complexant, l'acetate, sont ensuite observees et interpretees. Deux complexes acetiques du plutonium(IV) ont ete mis en evidence, dont l'un est un compose polymerise. (auteur)

Magnetic study of solid uranium-fluorine complexes; Contribution a l'etude magnetique de composes fluores solides de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Dianoux, A.J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-06-01

fluor. Nous montrons les difficultes d'interpretation du paramagnetisme des fluorures d'uranium, dans lesquels l'ion uranium est place dans un site de basse symetrie. L'etude theorique du magnetisme de l'ion U{sub V} dans les fluorures complexes du type M{sub 3}UF{sub 8} (M = NH{sub 4}, Na, Rb, Cs) conduit a interpreter les resultats experimentaux par une deformation trigonale de l'entourage a huit fluors de l'uranium. L'utilisation du formalisme de l'hamiltonien de spin et un emploi systematique de la theorie des groupes permettent de presenter les calculs de la susceptibilite d'une maniere concise. L'etude de la resonance et de la relaxation des fluors, dans des fluorures complexes d'uranium VI pulverulents, suggere un modele structural pour le compose NaUF{sub 7}. Nous montrons que la forme des raies d'absorption de resonance magnetique est dominee par la presence d'importants deplacements chimiques anisotropes. Dans le modele que nous proposons, six fluors sont lies a l'uranium par des liaisons a fort caractere de covalence, dans un octaedre UF{sub 6} deforme, le septieme fluor restant ionique. L'etude de la relaxation longitudinale des fluors confirme l'existence d'un mouvement de rotation de l'octaedre, l'energie d'activation etant de 0.46 eV. (auteur)

Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

Energy Technology Data Exchange (ETDEWEB)

Dubois, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces etudes, deux applications pratiques

Numerical description of creep of highly creep resistant alloys

International Nuclear Information System (INIS)

Preussler, T.

1991-01-01

Fatigue tests have been performed with a series of highly creep resistant materials for gas turbines and related applications for gaining better creep data up to long-term behaviour. The investigations were performed with selected individual materials in the area of the main applications down to strains and stresses relevant to design, and have attained trial durations of 25000 to 60000 h. In continuing former research, creep equations for a selection of characterizing individual materials have been improved and partly newly developed on the basis of a differentiated evaluation. Concerning the single materials, there are: one melt each of the materials IN-738 LC, IN-939, IN-100, FSX-414 and Inconel 617. The applied differentiated evaluation is based on the elastoplastical behaviour from the hot-drawing test, the creep behaviour from the non interrupted or the interrupted fatigue test, and the contraction behaviour from the annealing test. The creep equations developed describe the high temperature deformation behaviour taking into account primary, secondary and partly the tertiary creep dependent of temperature, stress and time. These equations are valid for the whole application area of the respective material. (orig./MM) [de

Influence of variations in creep curve on creep behavior of a high-temperature structure

International Nuclear Information System (INIS)

Hada, Kazuhiko

1986-01-01

It is one of the key issues for a high-temperature structural design guideline to evaluate the influence of variations in creep curve on the creep behavior of a high-temperature structure. In the present paper, a comparative evaluation was made to clarify such influence. Additional consideration was given to the influence of the relationship between creep rupture life and minimum creep rate, i.e., the Monkman-Grant's relationship, on the creep damage evaluation. The consideration suggested that the Monkman-Grant's relationship be taken into account in evaluating the creep damage behavior, especially the creep damage variations. However, it was clarified that the application of the creep damage evaluation rule of ASME B and P.V. Code Case N-47 to the ''standard case'' which was predicted from the average creep property would predict the creep damage on the safe side. (orig./GL)

The protective cell petrus for the production of californium 252; Cellule blindee petrus pour la production et l'etude du californium 252

Energy Technology Data Exchange (ETDEWEB)

Sontag, R; Berger, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1967-07-01

The alpha, beta, gamma, neutron cell which is described in the present paper is devoted to the transplutonium element production and study. It is located at the CEN in Fontenay-aux-Roses (France). The 4 feet ordinary concrete shielding made of stacked blocs allows the manipulation of radioactive sources as high as 1000 curies of 1 MeV gamma rays and with a fast neutrons flux of 10{sup 9} n.cm{sup -2}.s{sup -1}. The airtight alpha containment box is equipped with two transfer systems, one consists of a parallelepiped shaped airtight box located in a turntable, the other uses standard cylindrical containers made of polyethylene. The general equipment and the main setting up are also described. (authors) [French] La cellule alpha, beta, gamma, neutron, qui fait l'objet du present article, est destinee a la production et a l'etude des elements transplutoniens. Elle est construite au C.E.N. de Fontenay-aux-Roses (France). La protection biologique, calculee pour une activite de 1000 curies de rayonnement gamma d'energie 1 MeV accompagnee d'un flux de neutrons rapides de 10{sup 9}/cm{sup 2}s, est constituee par des parois en beton de 1,20 m d'epaisseur. L'enceinte alpha est une boite etanche qui comporte devx systemes de transferts: l'un consiste en une boite parallelepipedique etanche logee dans un barillet, l'autre fait appel a des recipients cylindriques standard en polyethylene. L'equipement general et les installations les plus importantes sont ensuite decrits. (auteurs)

Contribution to the study of {beta} disintegration and of nuclear structure using experiments on certain {beta}-{gamma} cascades: 198{sub Au}, 86{sub Rb}, 170{sub Tm}; Contribution a l'etude de la desintegration beta et a l'etude de la structure nucleaire a l'aide d'experiences sur certaines cascades beta-gamma: 198{sub Au}, 86{sub Rb}, 170{sub Tm}

Energy Technology Data Exchange (ETDEWEB)

Lachkar, J [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes; Paris-11 Univ., fabulte des Sciences 91 - Orsay (France)

1969-07-01

{beta}{gamma} directional angular correlations and shapes of inner beta spectra leading to the first excited level of the final nucleus enable one to determine the nuclear matrix elements typical of the {beta} transition. In the three observed first forbidden cases: {sup 170}Tm, {sup 86}Rb, {sup 198}Au, these matrix elements do not confirm the independent shell model theory. Other hypotheses are then suggested and discussed. (author) [French] Les experiences de correlation angulaire {beta}{gamma} et l'etude du spectre {beta} conduisant au premier niveau excite du noyau final permettent de determiner les elements de matrices nucleaires caracteristiques de cette transition. Dans les trois cas etudies (transitions une fois interdites): {sup 170}Tm, {sup 86}Rb, {sup 198}Au, ces elements de matrices ne peuvent etre retrouves a l'aide du modele en couches et a particules independantes. D'autres hypotheses sont alors emises et discutees. (auteur)

Creep theories compared by means of high sensitivity tensile creep data

International Nuclear Information System (INIS)

Salim, A.

1987-01-01

Commonly used creep theories include time-hardening, strain-hardening and Rabotnov's modified strain-hardening. In the paper they are examined by using high sensitivity tensile creep data produced on 1% CrMoV steel at a temperatue of 565 0 C. A special creep machine designed and developed by the author is briefly described and is compared with other existing machines. Tensile creep data reported cover a stress range of 100-260 MN m -2 ; four variable-creep tests each in duplicate are also reported. Test durations are limited to 3000 h, or failure, whichever occurs earlier. The strain-hardening theory and Rabotnov's modified strain-hardening theory are found to give good prediction of creep strain under variable stress conditions. The time-hardening theory shows a relatively poor agreement and considerably underestimates the accumulated inelastic strain under increasing stress condition. This discrepancy increases with the increased stress rate. The theories failed to predict the variable stress results towards the later part of the test where tertiary effects were significant. The use of creep equations which could account for creep strain at higher stress levels seems to improve the situation considerably. Under conditions of variable stress, it is suggested that a theory based on continuous damage mechanics concepts might give a better prediction. (author)

The study of neutron transport by oscillation method; Etude du transport des neutrons par la methode de modulation

Energy Technology Data Exchange (ETDEWEB)

Raievski, V

1959-07-01

The oscillation method is of very general use for studying the behavior of thermal neutrons in media. The main experiments are described and a general theory of them is given. This theory, which is presented in the first part, is established using the two-group approximation which has proved its efficiency in the case of thermal neutron piles. The validity of the two-group approximation is recalled. This allows definition of the meaning of the parameters used in the theory and which are measured in these experiments. The experiments carried out by this method are described, especially those performed at the Centre d'Etudes Nucleaires de Saclay where the method has been extensively used. These experiments are interpreted by means of the general theory given previously. In this way, the identity of parameters measured by this method and those given by the theory is proved. This is particularly conclusive is the case of the mean life of neutrons in a pile. (author) [French] La methode de modulation est un procede tres general d'etude des proprietes neutroniques des milieux contenant des neutrons thermiques. Le present rapport a pour but de decrire les principales de ces experiences et d'en donner une theorie generale. Cette theorie, exposee dans la premiere partie, est etablie dons le cadre de l'approximation a deux groupes de vitesse qui a prouve son efficacite dons le cas des piles a neutrons thermiques. Le domaine de validite de l'approximation a deux groupes est rappele au debut, ce qui permet de definir avec precision la signification des parametres qui entrent dons la theorie et qui font l'objet de ces mesures. La deuxieme partie decrit les experiences realisees, en particulier celles effectuees au Centre d'Etudes Nucleaires de Saclay ou la methode a ete considerablement developpee. Ces experiences sont interpretees dans le cadre de la theorie generale exposee precedemment. On prouve ainsi l'identite des parametres mesures par cette methode et de ceux figurant

Creep buckling of shell structures

International Nuclear Information System (INIS)

Miyazaki, Noriyuki; Hagihara, Seiya

2015-01-01

The present article contains a review of the literatures on the creep buckling of shell structures published from late 1950's to recent years. In this article, the creep buckling studies on circular cylindrical shells, spherical shells, partial cylindrical shells and other shells are reviewed in addition to creep buckling criteria. Creep buckling is categorized into two types. One is the creep buckling due to quasi-static instability, in which the critical time for creep buckling is determined by tracing a creep deformation versus time curve. The other is the creep buckling due to kinetic instability, in which the critical time can be determined by examining the shape of total potential energy in the vicinity of a quasi-static equilibrium state. Bifurcation buckling and snap-through buckling during creep deformation belong to this type of creep buckling. A few detailed descriptions are given to the bifurcation and snap-through type of creep buckling based on the present authors' works. (author)

Studies on solid-state physics carried out with the Saclay reactor (1962); Etudes de physique du solide realisees a la pile de Saclay (1962)

Energy Technology Data Exchange (ETDEWEB)

Herpin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1962-07-01

This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10{sup 13} n/cm{sup 2}, and - since 1958 - EL-3, whose central flux is equal ta 10{sup 14} n/cm{sup 2}. The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [French] Cet expose ne relate que des experiences de physique du solide faites sur des faisceaux sortis; plutot que de donner une revue de l'ensemble des travaux effectues, on ne cite que quelques etudes que l'on peut considerer comme plus essentielles ou mieux achevees. On utilise les faisceaux experimentaux des deux piles de Saclay, EL-2 dont le flux au centre est de 10{sup 13}n/cm{sup 2} et, depuis 1958, EL-3 pour laquelle il est egal a 10{sup 14} n/cm{sup 2}. Les experiences sont realisees par deux groupes de physiciens distincts, employant des techniques differentes, la diffraction des neutrons qui utilise un spectrometre a cristal, et la diffusion inelastique avec un spectrometre a temps de vol. (auteur)

Creep feeding nursing beef calves.

Science.gov (United States)

Lardy, Gregory P; Maddock, Travis D

2007-03-01

Creep feeding can be used to increase calf weaning weights. However, the gain efficiency of free-choice, energy-based creep feeds is relatively poor. Generally, limit-feeding, high-protein creep feeds are more efficient, and gains may be similar to those produced by creep feeds offered free choice. Creep feeding can increase total organic matter intake and improve the overall energy status of the animal. Creep-fed calves tend to acclimate to the feedlot more smoothly than unsupplemented calves. Furthermore, provision of a high-starch creep feed may have a positive influence on subsequent carcass quality traits. Creep feeding can be applied to numerous environmental situations to maximize calf performance; however, beef cattle producers should consider their individual situations carefully before making the decision to creep feed.

A statistical analysis of electrical cerebral activity; Contribution a l'etude de l'analyse statistique de l'activite electrique cerebrale

Energy Technology Data Exchange (ETDEWEB)

Bassant, Marie-Helene

1971-01-15

The aim of this work was to study the statistical properties of the amplitude of the electroencephalographic signal. The experimental method is described (implantation of electrodes, acquisition and treatment of data). The program of the mathematical analysis is given (calculation of probability density functions, study of stationarity) and the validity of the tests discussed. The results concerned ten rabbits. Trips of EEG were sampled during 40 s. with very short intervals (500 μs). The probability density functions established for different brain structures (especially the dorsal hippocampus) and areas, were compared during sleep, arousal and visual stimulus. Using a Χ{sup 2} test, it was found that the Gaussian distribution assumption was rejected in 96.7 per cent of the cases. For a given physiological state, there was no mathematical reason to reject the assumption of stationarity (in 96 per cent of the cases). (author) [French] Le but de ce travail est d'etudier les proprietes statistiques des amplitudes du signal electroencephalographique. La methode experimentale est decrite (implantation d'electrodes, acquisition et traitement des donnees). Le programme d'analyse mathematique est precise (calcul des courbes de repartition statistique, etude de la stationnarite du signal) et la validite des tests, discutee. Les resultats de l'etude portent sur 10 lapins. Des sequences de 40 s d'EEG sont echantillonnees. La valeur de la tension est prelevee a un pas d'echantillonnage de 500 μs. Les courbes de repartition statistiques sont comparees d'une region de l'encephale a l'autre (l'hippocampe dorsal a ete specialement analyse) ceci pendant le sommeil, l'eveil et des stimulations visuelles. Le test du Χ{sup 2} rejette l'hypothese de distribution normale dans 97 pour cent des cas. Pour un etat physiologique donne, il n'existe pas de raison mathematique a ce que soit repoussee l'hypothese de stationnarite, ceci dans 96.7 pour cent des cas. (auteur)

Aspects of the magnetism of ferrous chloride; Aspects du magnetisme du chlorure ferreux

Energy Technology Data Exchange (ETDEWEB)

Carrara, P [Commissariat a l' Energie Atomique Saclay (France). Centre d' Etudes Nucleaires

1968-03-01

This work is a critical review of the existing work on ferrous chloride and presents, as well, a number of new experimental results. First, a careful analysis of the level structure of ferrous ions in the crystalline field shows that the crystalline anisotropy is of the same order of magnitude as the exchange interactions, a feature which gives rise to some particular effects, such as an upward curvature of the magnetization curve at 0 K in a perpendicular magnetic field. Further, the very low temperature (T > 0.4 K) thermal variation of both the specific heat and magnetic susceptibility evidences a magnetic component in elementary excitations. This result suggests the presence of a large magneto-elastic coupling. Finally, an experimental study of the H-T phase diagram near T{sub N} and of the critical behaviour of the specific heat and parallel susceptibility was performed. (author) [French] Ce travail constitue une analyse critique des resultats obtenus a ce jour sur le chlorure ferreux et comporte en outre quelques resultats experimentaux nouveaux. Tout d'abord, une etude precise de la structure de niveaux de l'ion ferreux dans le champ cristallin montre que l'anisotropie cristalline est comparable aux interactions d'echange, ce qui produit quelques effets originaux tels que, par exemple, l'inflexion de la courbe d'aimantation a 0 K en champ perpendiculaire. D'autre part, la variation thermique a basse temperature (T > 0.4 K) de la chaleur specifique et de la susceptibilite magnetique montre la presence d'une composante magnetique dans les excitations de basse energie. Ce resultat suggere la presence d'un couplage magneto-elastique. Enfin, nous avons realise une etude experimentale de la ligne de transition de phase (diagramme H,T) au voisinage de T{sub N}, et du comportement critique de la chaleur specifique et de la susceptibilite parallele. (auteur)

Investigations on creep and creep fatigue crack behaviour for component assessment

International Nuclear Information System (INIS)

Gengenbach, T.; Klenk, A.; Maile, K.

2004-01-01

There are various methods to assess crack initiation and crack growth behaviour of components under creep and creep fatigue loading. The programme system HT-Riss has been developed to support calculations aimed to determine the behaviour of a crack under creep or creep-fatigue loading using methods based on stress-intensity factor K (e.g. the Two-Criteria-Diagram) or C*-Integral. This paper describes the steps which have to be performed to assess crack initiation and growth of a component using this programme system. First the size of the maximum initial defect in a specimen or in a component has to be estimated and the necessary fracture mechanics parameters have to be determined. Then the time for creep crack initiation and creep crack growth is calculated. Using these values a prediction of life time and necessary inspection intervals is possible. For exemplification the crack assessment of a component-like specimen and a component is shown. (orig.)

Study of the retention of fission products by a few common minerals. Application to the treatment of medium activity effluents (1962); Etude de la retention des produits de fission par quelques mineraux usuels. Application aux traitements d'effluents de moyenne activite specifique (1962)

Energy Technology Data Exchange (ETDEWEB)

Auchapt, J M [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

1962-07-01

The conditions in which strontium is fixed on calcite (the object of the Geneva report P/395 - USA - 1958) are more closely studied and the work is extended to five fission products present in the effluents, and to 17 common rocks and minerals. Although as it turns out this fixation is not suitable as a method of treating the S.T.E. effluents (i.e. those from the Effluent Treatment plant at Marcoule), the study shows that all the crystals considered are strongly contaminated by simple contact with the effluents. (author) [French] Les conditions de fixation du strontium sur la calcite (objet du rapport de Geneve P/395 - USA - 1958) sont approfondies et l'etude est etendue aux cinq produits de fission presents dans les effluents et a 17 roches et minerais courants. Bien qu'en definitive cette fixation se revele inutilisable comme procede de traitement d'effluents S.T.E. (Station de Traitement des Effluents, Marcoule), l'etude montre que tous les cristaux consideres se contaminent fortement par simple contact avec les effluents. (auteur)

Cell for studying electron-adsorbed gas interactions; Cellule d'etudes des interactions electron-gaz adsorbe

Energy Technology Data Exchange (ETDEWEB)

Golowacz, H; Degras, D A [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires, Deptartement de Physique des Plasmas et de la Fusion Controlee, Service de Physique Appliquee, Service de Physique des Interractions Electroniques, Section d' Etude des Interactions Gaz-Solides

1967-07-01

The geometry and the technology of a cell used for investigations on electron-adsorbed gas interactions are described. The resonance frequencies of the surface ions which are created by the electron impact on the adsorbed gas are predicted by simplified calculations. The experimental data relative to carbon monoxide and neon are in good agreement with these predictions. (authors) [French] Les caracteristiques geometriques et technologiques generales d'une cellule d'etude des interactions entre un faisceau d'electrons et un gaz adsorbe sont donnees. Un calcul simplifie permet de prevoir les frequences de resonance des ions de surface crees par l'impact des electrons sur le gaz adsorbe. Les donnees experimentales sur l'oxyde de carbone et le neon confirment les previsions du calcul. (auteurs)

Experimental study and modelling of high temperature creep flow and damage behaviour of 9Cr1Mo-NbV steel weldments; Etude experimentale et modelisation, du comportement, de l'endommagement et de la rupture en fluage a haute temperature de joint soudes en acier 9Cr1Mo-NbV

Energy Technology Data Exchange (ETDEWEB)

Gaffard, V

2004-12-15

Chromium martensitic stainless steels are under development since the 70's with the prospect of using them as structural components in thermal and nuclear power plants. The modified 9Cr1Mo-NbV steel is already used, especially in England and Japan, as a material for structural components in thermal power plants where welding is a commonly used joining technique. New generations of chromium martensitic stainless steels with improved mechanical properties for high pressure and temperature use are currently under development. However, observations of several in-service premature failures of welded components in 9Cr1Mo-NbV steel, outline a strong need for understanding the high temperature creep flow and damage behaviour of 9Cr1Mo-NbV steels and weldments. The present study aimed at experimentally determining and then modelling the high temperature creep flow and damage behaviour of both 9Cr1Mo-NbV steels and weldments (typically in the temperature range from 450 C to 650 C). The base metal was first studied as the reference material. It was especially evidenced that tempered chromium martensitic steels exhibit a change in both creep flow and damage behaviour for long term creep exposure. As a consequence, the classically performed extrapolation of 1,000 hours creep data to 100,000 hours creep lifetime predictions might be very hazardous. Based on experimental observations, a new model, integrating and coupling multiple creep flow and damage mechanisms, was developed in the framework of the mechanics of porous media. It was then successfully used to represent creep flow and damage behaviour of the base metal from high to low stress levels even for complex multiaxial loading conditions. Although the high temperature creep properties of the base metal are quite good, the occurrence of premature failure in weldments in high temperature creep conditions largely focused the attention of the scientific community. The lower creep strength of the weld component was also

Theoretical study and construction of a multichannel {beta} spectrometer with uniform magnetic field; Etude et realisation d'un spectrometre {beta} multivoies a champ magnetique uniforme

Energy Technology Data Exchange (ETDEWEB)

Schussler, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-09-01

After a brief survey of the interest of a multichannel beta spectrometer for studying decay schemes of short lived nuclides (30 seconds minimum, the theoretically well known characteristics of uniform magnetic field analyser (image of a large source, transmission and resolution) are briefly remembered. In the second part, the apparatus built as a result of these calculations is described. This apparatus allows the determination of beta spectra by simultaneous determination of the beta spectra in coincidence with four gamma rays predetermined in the gamma spectrum of the studied nuclide. Finally, in the last part, the experimental characteristics of the spectrometer (calibration in energy and transmission) and the first measurement of beta spectra ({sup 155}Sm) and of coincidences ({sup 24}Na), are given. (author) [French] Apres avoir brievement souligne l'interet pratique que presente un spectrometre multivoies pour l'etude des schemas de desintegration des corps radioactifs de courtes periodes (30 secondes au maximum), l'auteur effectue un rappel des caracteristiques theoriques bien connues d'un analyseur magnetique a champ uniforme (image d'une source etendue) calcul de la transmission et du pouvoir de resolution. Une deuxieme partie est consacree a la description de l'appareil realise d'apres ces calculs. Cet appareil permet le releve des spectres beta par detection, simultanee de dix groupes d'electrons d'energies differentes; il permet egalement le releve simultane des spectres beta en coincidence avec quatre rayonnements gammas preselectionnes a l'avance dans le spectre gamma du corps etudie. Dans une derniere partie enfin, sont donnees les caracteristiques experimentales du spectrometre (etalonnage en energie et en transmission) ainsi que les premiers resultats des etudes de spectre beta ({sup 155}Sm) et de coincidence ({sup 24}Na). (auteur)

Realization of an electromagnetic isotope separator. Application to the isotopes of the mass 93 from the molybdenum and the technetium; Realisation d'un separateur electromagnetique d'isotope. Application a l'etude des isotopes de masse 93 du molybdene et du technetium

Energy Technology Data Exchange (ETDEWEB)

Bernas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1954-07-15

Analysis of focusing properties of a homogeneous magnetic field leads the author to use a magnetic sector of 60 deg, for the realization of an electromagnetic separator. The sources of realized ions provide ionic debits of 10 mA. The currents ionic detached isotopes to the collector vary from 1 to 5 mA. The separation efficiency is of 125 for a current collected of 1 mA. A survey of the neutralization of the space charge permitted to specify the role of the negative ions in this phenomenon. A method of neutralization of the space charge is proposed and gave excellent results. A report will be given of the separations of some elements: mercury, bromine, thorium, etc... The application of the separator to the study of the isomeric transfers in the molybdenum and the technetium permitted to assign definitely for {sup 93}Mo and {sup 93}Tc two radiances {gamma} of respective energies 260 and 390 keV. A new process of fast chemical separation Mo/Tc is described. (author) [French] L'analyse des proprietes de focalisation d'un champ magnetique homogene conduit l'auteur, pour la realisation d'un separateur electromagnetique, a employer un secteur magnetique de 60 deg. Les sources d'ions realisees fournissent des debits ioniques de 10 mA. Les courants ioniques d'isotopes separes au collecteur varient de 1 a 5 mA. Le pouvoir separateur est de 125 pour un courant collecte de 1 mA. Une etude de la neutralisation de la charge d'espace a permis de preciser le role des ions negatifs dans ce phenomene. Une methode de neutralisation de la charge d'espace est proposee et a donne d'excellents resultats. On donne le compte rendu des separations de quelques elements: mercure, brome, thorium, etc... L'application du separateur a l'etude des translations isomeriques dans le molybdene et le technetium a permis d'attribuer definitivement a {sup 93}Mo et a {sup 93}Tc deux rayonnements {gamma} d'energies respectives 260 et 390 keV. Un nouveau procede de separation chimique rapide Mo c est

Development of evaluation technique of high temperature creep characteristics by small punch-creep test method (I)

International Nuclear Information System (INIS)

Baek, Seung Se; Na, Sung Hun; Yu, Hyo Sun; Na, Eui Gyun

2001-01-01

In this study, a Small Punch Creep(SP-Creep) test using miniaturized specimen(10 x 10 x 0.5mm) is described to develop the new creep test method for high temperature structural materials. The SP-Creep test is applied to 2.25Cr-1Mo(STBA24) steel which is widely used as boiler tube material. The test temperatures applied for the creep deformation of miniaturized specimens are between 550∼600 .deg. C. The SP-Creep curves depend definitely on applied load and creep temperature, and show the three stages of creep behavior like in conventional uniaxial tensile creep curves. The load exponent of miniaturized specimen decrease with increasing test temperature, and its behavior is similar to stress exponent behavior of uniaxial creep test. The creep activation energy obtained from the relationship between SP-Creep rate and test temperature decreases as the applied load increases. A predicting equation of SP-Creep rate for 2.25Cr-1Mo steel is suggested, and a good agreement between experimental and calculated data has been found

Prediction of the creep properties of discontinuous fibre composites from the matrix creep law

International Nuclear Information System (INIS)

Bilde-Soerensen, J.B.; Boecker Pedersen, O.; Lilholt, H.

1975-02-01

Existing theories for predicting the creep properties of discontinuous fibre composites with non-creeping fibres from matrix creep properties, originally based on a power law, are extended to include an exponential law, and in principle a general matrixlaw. An analysis shows that the composite creep curve can be obtained by a simple displacement of the matrix creep curve in a log sigma vs. log epsilon diagram. This principle, that each point on the matrix curve has a corresponding point on the composite curve,is given a physical interpretation. The direction of displacement is such that the transition from a power law toan exponential law occurs at a lower strain rate for the composite than for the unreinforced matrix. This emphasizes the importance of the exponential creep range in the creep of fibre composites. The combined use of matrix and composite data may allow the creep phenomenon to be studied over a larger range of strain rates than otherwise possible. A method for constructing generalized composite creep diagrams is suggested. Creep properties predicted from matrix data by the present analysis are compared with experimental data from the literature. (author)

Experimental study of the hydrodynamic instabilities occurring in boiling-water reactors; Etude experimentale des instabilites hydrodynamiques survenant dans les reacteurs nucleaires a ebullition

Energy Technology Data Exchange (ETDEWEB)

Fabreca, S. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-10-01

en convection naturelle et en convection forcee avec by-pass du canal d'essai. L'etude comporte 3 parties: 1. L'etablissement prealable des lois de la perte de pression en ebullition. 2. La determination des frontieres d'apparition de l'oscillation, dans une gamme tres large des parametres intervenant. 3. Une etude descriptive des oscillations et la mesure des periodes. Les frontieres de l'oscillation sont fournies en convection naturelle et en convection forcee pour diverses valeurs de la perte de charge singuliere a l'entree du canal et pour differentes longueurs de cheminee. Les resultats sont presentes sous une forme adimensionnelle valable en premiere approximation quelles que soient l'echelle geometrique et la nature du fluide. Enfin on a constate les particularites suivantes: - la paroi (nature et epaisseur) peut jouer un role important; - l'oscillation est possible en canal horizontal. (auteur)

Creep Rupture Life Prediction Based on Analysis of Large Creep Deformation

Directory of Open Access Journals (Sweden)

YE Wenming

2016-08-01

Full Text Available A creep rupture life prediction method for high temperature component was proposed. The method was based on a true stress-strain elastoplastic creep constitutive model and the large deformation finite element analysis method. This method firstly used the high-temperature tensile stress-strain curve expressed by true stress and strain and the creep curve to build materials' elastoplastic and creep constitutive model respectively, then used the large deformation finite element method to calculate the deformation response of high temperature component under a given load curve, finally the creep rupture life was determined according to the change trend of the responsive curve.The method was verified by durable test of TC11 titanium alloy notched specimens under 500 ℃, and was compared with the three creep rupture life prediction methods based on the small deformation analysis. Results show that the proposed method can accurately predict the high temperature creep response and long-term life of TC11 notched specimens, and the accuracy is better than that of the methods based on the average effective stress of notch ligament, the bone point stress and the fracture strain of the key point, which are all based on small deformation finite element analysis.

Creep and creep recovery of concrete subjected to triaxial compressive stresses at elevated temperature

International Nuclear Information System (INIS)

Ohnuma, Hiroshi; Abe, Hirotoshi

1979-01-01

In order to design rationally the vessels made of prestressed concrete for nuclear power stations and to improve the accuracy of high temperature creep analysis, the Central Research Institute of Electric Power Industry had carried out the proving experiments with scale models. In order to improve the accuracy of analysis, it is important to grasp the creep behavior of the concrete subjected to triaxial compressive stresses at high temperature as the basic property of concrete, because actual prestressed concrete vessels are in such conditions. In this paper, the triaxial compression creep test at 60 deg. C using the concrete specimens with same mixing ratio as the scale models is reported. The compressive strength of the concrete at the age of 28 days was 406 kg/cm 2 , and the age of the concrete at the time of loading was 63 days. Creep and creep recovery were measured for 5 months and 2 months, respectively. The creep of concrete due to uniaxial compression increased with temperature rise, and the creep strain at 60 deg. C was 2.54 times as much as that at 20 deg. C. The effective Poisson's ratio in triaxial compression creep was 0.15 on the average, based on the creep strain due to uniaxial compression at 60 deg. C. The creep recovery rate in high temperature, triaxial compression creep was 33% on the average. (Kako, I.)

Survie au cancer du sein à Rabat (Maroc) 2005-2008

Science.gov (United States)

Mechita, Nada Bennani; Tazi, Mohammed Adnane; Er-Raki, Abdelouahed; Mrabet, Mustapha; Saadi, Asma; Benjaafar, Noureddine; Razine, Rachid

2016-01-01

Introduction Le cancer du sein représente un problème de santé publique au Maroc. L’objectif de ce travail était d’estimer le taux de survie au cancer du sein chez les patientes habitant la ville de Rabat. Méthodes Etude pronostique réalisée chez les patientes diagnostiquées pour cancer du sein de 2005 à 2008, habitant la ville de Rabat et enregistrées au registre des cancers de Rabat. La date d’inclusion dans l’étude correspondait à la date de confirmation histologique du cancer. L’estimation de la survie a été réalisée par la méthode de Kaplan Meier, et la comparaison entre les différentes classes d’une variable a été réalisée par le test de log rank. L’étude des facteurs associés à la survie a été effectuée par le modèle de Cox. Résultats Durant la période d’étude 628 cas de cancer du sein ont été collectés. Le pourcentage de décès était de 19,9%. La survie globale à un an était de 97,1%, elle était de 89,2% à 3 ans et de 80,6 % à 5 ans. En analyse multivariée la survie au cancer du sein était statistiquement moins bonne chez les patientes âgées de plus de 70 ans (p<0,001), ayantune grande taille de tumeur (p<0,001), un stade avancé d’adénopathies (p=0,007), présentant des métastases (p<0,001) et non traitées par hormonothérapie (p=0,002). Conclusion Une grande taille de la tumeur et la présence de métastases sont des facteurs de mauvais pronostic du cancer du sein d’où la nécessité de renforcer les programmes de dépistage. PMID:28292106

Sédimentation et diagenèse des minéraux argileux du Jurassique supérieur-Crétacé dans le Jura méridional et le domaine subalpin (France, Sud-Est). Comparaison avec le domaine Atlantique Nord

OpenAIRE

Deconinck , Jean-François

1984-01-01

Le but de cette thèse est de décrire et d'expliquer l'évolution des assemblages argileux dans les Alpes occidentales depuis l'Oxfordien jusqu'au Crétacé supérieur, et de la comparer à celle connue dans l'Atlantique nord grâce aux forages DSDP. Etude géologique, sédimentologique et géochimique. Les assemblages argileux du Mésozolque supérieur (Malm - Crétacé) du domaine subalpin et du Jura mérldional sont étudiés par diffraction des rayons X, microscopie électronique à transmission et analyses...

Micro creep mechanisms of tungsten

International Nuclear Information System (INIS)

Levoy, R.; Hugon, I.; Burlet, H.; Baillin, X.; Guetaz, L.

2000-01-01

Due to its high melting point (3410 deg C), tungsten offers good mechanical properties at elevated temperatures for several applications in non-oxidizing environment. The creep behavior of tungsten is well known between 1200 and 2500 deg C and 10 -3 to 10 -1 strain. However, in some applications when dimensional stability of components is required, these strains are excessive and it is necessary to know the creep behavior of the material for micro-strains (between 10 -4 and 10 -6 ). Methods and devices used to measure creep micro-strains are presented, and creep equations (Norton and Chaboche laws) were developed for wrought, annealed and recrystallized tungsten. The main results obtained on tungsten under low stresses are: stress exponent 1, symmetry of micro-strains in creep-tension and creep-compression, inverse creep (threshold stress), etc. TEM, SEM and EBSD studies allow interpretation of the micro-creep mechanism of tungsten under low stresses and low temperature (∼0.3 K) like the Harper-Dorn creep. In Harper-Dorn creep, micro-strains are associated with the density and the distribution of dislocations existing in the crystals before creep. At 975 deg C, the initial dislocation structure moves differently whether or not a stress is applied. To improve the micro-creep behavior of tungsten, a heat treatment is proposed to create the optimum dislocation structure. (authors)

The prediction of creep damage in Type 347 weld metal: part II creep fatigue tests

International Nuclear Information System (INIS)

Spindler, M.W.

2005-01-01

Calculations of creep damage under conditions of strain control are often carried out using either a time fraction approach or a ductility exhaustion approach. In part I of this paper the rupture strength and creep ductility data for a Type 347 weld metal were fitted to provide the material properties that are used to calculate creep damage. Part II of this paper examines whether the time fraction approach or the ductility exhaustion approach gives the better predictions of creep damage in creep-fatigue tests on the same Type 347 weld metal. In addition, a new creep damage model, which was developed by removing some of the simplifying assumptions that are made in the ductility exhaustion approach, was used. This new creep damage model is a function of the strain rate, stress and temperature and was derived from creep and constant strain rate test data using a reverse modelling technique (see part I of this paper). It is shown that the new creep damage model gives better predictions of creep damage in the creep-fatigue tests than the time fraction and the ductility exhaustion approaches

Browse Title Index

African Journals Online (AJOL)

Vol 18, No 4 (2016): Series B, D, E, Etude de la magnetoresistance du compose supraconducteur YBa2(Cu1-xTix)3Oy suite a un multicycle de traitement thermique, Abstract. D Mani Kongnine, A Hamrita, K Napo. Vol 16, No 2 (2014), Etude de la Pyrolyse en Analyse Thermogravimetrique du Carton : Cinetique Double ...

Influences of cyclic deformation on creep property and creep-fatigue life prediction considering them

International Nuclear Information System (INIS)

Takahashi, Yukio

2009-01-01

Evaluation of creep-fatigue is essential in design and life management of high-temperature components in power generation plants. Cyclic deformation may alter creep property of the materials and its consideration may improve predictability of creep-fatigue failure life. To understand them, creep tests were conducted for the materials subjected to cyclic loading and their creep rupture and deformation behaviors were compared with those of as-received materials. Both 316FR and modified 9Cr-1Mo steel were tested. (1) Creep rupture time and elongation generally tend to decrease with cyclic loading in both materials, and especially elongation of 316FR drastically decreases by being cyclically deformed. (2) Amount of primary creep deformation decreases by cyclic loading and the ways to improve its predictability were developed. (3) Use of creep rupture ductility after cyclic deformation, instead of that of as-received material, brought about clear improvement of life prediction in a modified ductility exhaustion approach. (author)

Influence of creep ductility on creep-fatigue behaviour of 20%Cr/25%Ni/Nb stainless steel

International Nuclear Information System (INIS)

Gladwin, D.; Miller, D.A.

1985-01-01

The influence of creep ductility on creep-fatigue endurance of 20%Cr/25%Ni/Nb stainless steel has been examined. In order to induce different creep ductilities in the 20/25/Nb stainless steel, three different thermo-mechanical routes were employed. These resulted in a range of ductilities (3-36%) being obtained at the strain rates of interest. Strain controlled slow-fast creep-fatigue cycles were used with strain rates of 10 -6 s -1 , 10 -7 s -1 in tension and 10 -3 s -1 in compression. It was found that creep ductility strongly influenced the creep-fatigue endurance of the 20/25/Nb stainless steel. When failure was creep dominated endurance was found to be directly proportional to the creep ductility. A ductility exhaustion model has been used to successfully predict creep-fatigue endurance when failure was creep dominated. (author)

A creep life assessment method for boiler pipes using small punch creep test

International Nuclear Information System (INIS)

Izaki, Toru; Kobayashi, Toshimi; Kusumoto, Junichi; Kanaya, Akihiro

2009-01-01

The small punch creep (SPC) test is considered as a highly useful method for creep life assessment for high temperature plant components. SPC uses miniature-sized specimens and does not cause any serious sampling damages, and its assessment accuracy is at a high level. However, in applying the SPC test to the residual creep life assessment of the boiler in service, there are some issues to be studied. In order to apply SPC test to the residual creep life assessment of the 2.25Cr-1Mo steel boiler pipe, the relationship between uniaxial creep stress and the SPC test load has been studied. The virgin material, pre-crept, weldment and service aged samples of 2.25Cr-1Mo steel were tested. It was confirmed that the relationship between uniaxial creep stress and the SPC test load at the same rupture time can be described as a single straight line independent of test conditions and materials. Therefore a life assessment is possible by using SPC test in place of uniaxial creep tests. The creep life assessment using SPC was applied to actual thermal power plant components which are in service.

Influence of stress on creep deformation properties of 9-12Cr ferritic creep resistant steels

Energy Technology Data Exchange (ETDEWEB)

Kimura, K.; Sawada, K.; Kushima, H. [National Institute for Materials Science (Japan)

2008-07-01

Creep deformation property of 9-12Cr ferritic creep resistant steels was investigated. With decrease in stress, a magnitude of creep strain at the onset of accelerating creep stage decreased from about 2% in the short-term to less than 1% in the longterm. A time to 1% total strain was observed in the transient creep stage in the short term regime, however, it shifted to the accelerating creep stage in the long-term regime. Life fraction of the times to 1% creep strain and 1% total strain tended to increase with decrease in stress. Difference in stress dependence of the minimum creep rate was observed in the high- and low-stress regimes with a boundary condition of 50% of 0.2% offset yield stress. Stress dependence of the minimum creep rate in the high stress regime was equivalent to a strain rate dependence of the flow stress evaluated by tensile test, and a magnitude of stress exponent, n, in the high stress regime decreased with increase in temperature from 20 at 550 C to 10 at 700 C. On the other hand, n value in the low stress regime was about 5, and creep deformation in the low stress regime was considered to be controlled by dislocation climb. Creep rupture life was accurately predicted by a region splitting method by considering a change in stress dependence of creep deformation. (orig.)

Elaboration du Ge mesoporeux et etude de ses proprietes physico-chimiques en vue d'applications photovoltaiques

Science.gov (United States)

Tutashkonko, Sergii

Le sujet de cette these porte sur l'elaboration du nouveau nanomateriau par la gravure electrochimique bipolaire (BEE) --- le Ge mesoporeux et sur l'analyse de ses proprietes physico-chimiques en vue de son utilisation dans des applications photovoltaiques. La formation du Ge mesoporeux par gravure electrochimique a ete precedemment rapportee dans la litterature. Cependant, le verrou technologique important des procedes de fabrication existants consistait a obtenir des couches epaisses (superieure a 500 nm) du Ge mesoporeux a la morphologie parfaitement controlee. En effet, la caracterisation physico-chimique des couches minces est beaucoup plus compliquee et le nombre de leurs applications possibles est fortement limite. Nous avons developpe un modele electrochimique qui decrit les mecanismes principaux de formation des pores ce qui nous a permis de realiser des structures epaisses du Ge mesoporeux (jusqu'au 10 mum) ayant la porosite ajustable dans une large gamme de 15% a 60%. En plus, la formation des nanostructures poreuses aux morphologies variables et bien controlees est desormais devenue possible. Enfin, la maitrise de tous ces parametres a ouvert la voie extremement prometteuse vers la realisation des structures poreuses a multi-couches a base de Ge pour des nombreuses applications innovantes et multidisciplinaires grace a la flexibilite technologique actuelle atteinte. En particulier, dans le cadre de cette these, les couches du Ge mesoporeux ont ete optimisees dans le but de realiser le procede de transfert de couches minces d'une cellule solaire a triple jonctions via une couche sacrificielle en Ge poreux. Mots-cles : Germanium meso-poreux, Gravure electrochimique bipolaire, Electrochimie des semi-conducteurs, Report des couches minces, Cellule photovoltaique

Creep and creep fatigue crack behavior of 1Cr- and 9Cr-steels

International Nuclear Information System (INIS)

Maile, K.; Klenk, A.; Schellenberg, G.; Granacher, J.; Tramer, M.

2000-01-01

A large database for creep crack initiation and propagation under constant load conditions is available on conventional power plant steels of types 1%Cr and 12%Cr. Modern plants are often used in the medium and peak load regime, thus the dominant loading situation in high temperature components is creep fatigue. For life assessment data about crack initiation and growth under creep fatigue loading are required. These characteristics can not be substituted by pure fatigue or creep crack data. Therefore, a comprehensive test programme was started to investigate the creep fatigue crack behaviour of a 1%CrMoNiV turbine rotor steel (30CrMoNiV 4 11) at 550 C and a new 9%CrMoVNb pipe steel (type P 9 1) at 600 C. DENT-specimen with 15 and 60 mm thickness as well as side grooved CT-specimen with 25 and 50 mm thickness have been tested to determine possible influences of geometry and thus to check the transferability of the data to components. The creep fatigue crack growth results of tests with dwell times between t H = 0,32h and 10 h lie in the scatterbands given by creep crack growth results. Nevertheless a higher crack growth rate under creep fatigue conditions can be stated. An increase in crack growth rate due to creep fatigue is clearly visible. Loading situations with frequencies higher than 1.10 -4 Hz should be not assessed with pure creep crack results or sufficient safety margins have to be applied. (orig.)

Interleukin-6 gene polymorphisms and susceptibility to myocardial infarction: the ECTIM study. Etude Cas-Témoin de l'Infarctus du Myocarde.

Science.gov (United States)

Georges, J L; Loukaci, V; Poirier, O; Evans, A; Luc, G; Arveiler, D; Ruidavets, J B; Cambien, F; Tiret, L

2001-06-01

There is growing evidence that interleukin (IL) 6 plays an important role in the atherosclerotic process because of its role in mediating immune and inflammatory responses and inducing cell proliferation. The present study examined whether molecular variations at the IL-6 locus are involved in the predisposition to myocardial infarction. The entire coding region, 1,158 bp of the 5' flanking region and 237 bp of the 3' flanking region of the IL-6 gene were screened. We detected three nucleotide substitutions in the 5' region at positions -174 (G/C), -572 (G/C), and -596 (G/A) from the transcription start site, and one insertion/deletion in the 3' region at position +528 after the Stop codon. These polymorphisms were genotyped in the Etude Cas-Témoin de l'Infarctus du Myocarde study comparing male patients (n=640) and age-matched controls (n=719) from Northern Ireland and France. The IL-6/G-174C and IL-6/G-596A polymorphisms were in nearly complete association. Carriers of the IL-6/-174 C allele were more frequent in patients than in controls. The population-adjusted odds ratio for myocardial infarction associated with genotype CC+CG vs. GG was estimated as 1.34. In French patients the number of coronary arteries with greater than 50% stenosis was assessed by angiography. The IL-6/-174 C allele was more frequent in patients with two or fewer stenosed vessels than in patients with three-vessel lesions. These results suggest that genetic variation at the IL-6 locus is associated with susceptibility to myocardial infarction, especially events occurring on less extended lesions. These findings would be compatible with a lower IL-6 secretion associated with the IL-6/-174 C allele, itself or in combination with other promoter polymorphisms, leading to more unstable plaques.

Kinetic study of the fluorination by fluorine of some uranium and plutonium compounds; Etude cinetique de la fluoration par le fluor de quelques composes de l'uranium et du plutonium

Energy Technology Data Exchange (ETDEWEB)

Vandenbussche, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-12-15

The study of fluorination reactions of uranium and plutonium compounds with elementary fluorine, has been carried out using a thermogravimetric method. These reactions are heterogeneous ones, and of the following type: S(solid) + G{sub 1}(gas) - G{sub 2}(gas). The kinetics of these reactions correspond to a uniform attack of the entire surface of the sample. {alpha}: being the degree of completion of the reaction, k(rel): being the relative rate of penetration of the reaction interface, t: being the time, one have the relation: (1-{alpha}){sup 1/3} = 1 - k(rel)*t. The mechanism of the reaction varies according to the nature of the compound: 1) with uranium tetrafluoride and plutonium tetrafluoride, the reaction proceeds in a single step; 2) with uranium oxides, the reaction proceeds in two steps, uranium oxyfluoride being the intermediate compound; 3) with plutonium oxide, the reaction proceeds in two steps, plutonium tetrafluoride being the intermediate compound; and 4) with uranium trichloride, the mechanism is complex: chlorine trifluoride is formed. (author) [French] L'etude des reactions de fluoration par le fluor, de composes de l'uranium et du plutonium a ete faite par thermogravimetrie. Ce sont des reactions heterogenes du type: S(solide) + G{sub 1}(gaz) - G{sub 2}(gaz). La cinetique de ces reactions est celle correspondant a une attaque uniforme de toute la surface de l'echantillon. Si {alpha}: est le degre d'avancement de la reaction, k(rel): est la vitesse relative d'avancement d'un interface reactionnel, t: le temps. On a la relation: (1-{alpha}){sup 1/3} = 1-k(rel)*t. Le mecanisme de la reaction varie selon la nature du compose: 1) tetrafluorure d'uranium et tetrafluorure de plutonium, la reaction s'effectue en un seul stade; 2) Oxydes d'uranium: la reaction s'effectue en deux stades, l'oxyfluorure d'uranium est le compose intermediaire; 3) oxyde de plutonium, la reaction s'effectue en deux stades, la tetrafluorure de plutonium est le compose

Study of {gamma}'s in Naiade; Etude des gamma de Naiade

Energy Technology Data Exchange (ETDEWEB)

Millot, J P; Rastoin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Following a study of the gamma sources, the flux of gamma of different energies in the swimming pool is investigated. The biological dose can thus be obtained by calculation, and compared with the results given by photographic plates. The influence of photoneutrons is estimated by calculation, and research is being carried out on their influence on the thermal neutron flux curve on the axis of the uranium plate, with the plate emitting neutrons and with the plate protected by boral. (author) [French] Apres l'etude des sources de gamma, l'on etudie le flux de gamma de differentes energies dans la piscine. La dose biologique peut etre obtenue ainsi par le calcul et comparee avec les resultats donnes par les plaques photographiques. L'influence des photoneutrons est estimee par le calcul et l'on recherche leur influence sur la courbe de flux de neutrons thermiques sur l'axe de la plaque d'uranium, la plaque emettant des neutrons et la plaque protegee par du boral. (auteur)

Creep of high temperature composites

International Nuclear Information System (INIS)

Sadananda, K.; Feng, C.R.

1993-01-01

High temperature creep deformation of composites is examined. Creep of composites depends on the interplay of many factors. One of the basic issues in the design of the creep resistant composites is the ability to predict their creep behavior from the knowledge of the creep behavior of the individual components. In this report, the existing theoretical models based on continuum mechanics principles are reviewed. These models are evaluated using extensive experimental data on molydisilicide-silicon carbide composites obtained by the authors. The analysis shows that the rule of mixture based on isostrain and isostress provides two limiting bounds wherein all other theoretical predictions fall. For molydisilicide composites, the creep is predominantly governed by the creep of the majority phase, i.e. the matrix with fibers deforming elastically. The role of back stresses both on creep rates and activation energies are shown to be minimum. Kinetics of creep in MoSi 2 is shown to be controlled by the process of dislocation glide with climb involving the diffusion of Mo atoms

Underground nuclear explosions. Geological survey of the cavities; Explosions nucleaires souterraines etude geologique des cavites

Energy Technology Data Exchange (ETDEWEB)

Faure, J [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

1969-07-01

A geological survey of underground nuclear explosions makes it possible to determine the main characteristics of the cavity formed. The lower portion is spherical; the same was very likely true of the roof, which collapses in the majority of media with the exception of rock-salt. Its radius, for a given bomb size, can vary by a factor of two according to the type of rock. The lay-out of its contents depends on the characteristics of the solid and liquid products at the moment of the roof collapse; according to the medium involved, mixing of the rubble and the mud-flow occurs (granite) or does not occur (tuff and alluvia). In all media, the average physical properties can be evaluated. (author) [French] L'etude geologique d'explosions nucleaires souterraines permet de determiner les principaux caracteres de la cavite creee. Sa partie inferieure est spherique; il en etait vraisemblablement de meme de sa voute, effondree dans la plupart des milieux a l'exception du sel gemme. Son rayon, a energie d'engin egale, varie selon les roches du simple au double. La disposition de son contenu depend des caracteristiques des produits solides et liquides au moment de la chute du toit; selon le cas, il n'y a pas (tuf et alluvions) ou il y a (granite) melange des eboulis et des laves. Dans tous les milieux, les proprietes physiques moyennes peuvent etre evaluees. (auteur)

Contribution to the study of {beta} disintegration and of nuclear structure using experiments on certain {beta}-{gamma} cascades: 198{sub Au}, 86{sub Rb}, 170{sub Tm}; Contribution a l'etude de la desintegration beta et a l'etude de la structure nucleaire a l'aide d'experiences sur certaines cascades beta-gamma: 198{sub Au}, 86{sub Rb}, 170{sub Tm}

Energy Technology Data Exchange (ETDEWEB)

Lachkar, J. [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes; Paris-11 Univ., fabulte des Sciences 91 - Orsay (France)

1969-07-01

{beta}{gamma} directional angular correlations and shapes of inner beta spectra leading to the first excited level of the final nucleus enable one to determine the nuclear matrix elements typical of the {beta} transition. In the three observed first forbidden cases: {sup 170}Tm, {sup 86}Rb, {sup 198}Au, these matrix elements do not confirm the independent shell model theory. Other hypotheses are then suggested and discussed. (author) [French] Les experiences de correlation angulaire {beta}{gamma} et l'etude du spectre {beta} conduisant au premier niveau excite du noyau final permettent de determiner les elements de matrices nucleaires caracteristiques de cette transition. Dans les trois cas etudies (transitions une fois interdites): {sup 170}Tm, {sup 86}Rb, {sup 198}Au, ces elements de matrices ne peuvent etre retrouves a l'aide du modele en couches et a particules independantes. D'autres hypotheses sont alors emises et discutees. (auteur)

Prediction of creep-fatigue life by use of creep rupture ductility

International Nuclear Information System (INIS)

Yamaguchi, Koji; Suzuki, Naoyuki; Ijima, Kiyoshi; Kanazawa, Kenji

1985-01-01

It was clarified that tension strain hold reduced creep-fatigue life of many engineering materials in different degrees depending on material, temperature and test duration. However the reduction in the life due to holding for various durations could be correlated to the fraction of intergranular facets on fracture surfaces which was considered to be an index of the damage introduced during strain hold. This fraction of intergranular facets by creep-fatigue failure exhibited a direct relation to the creep rupture ductility of the material tested at the same temperature and for the same creep-fatigue life-time. From these results an empirical equation has been derived as follow; (Δ sub(epsilonsub(i)))/Dsub(c).(N sub(h sup(α))) = C, where Δ sub(epsilonsub(i)) is inelastic strain range, Dsub(c) is the creep rupture ductility for the same duration as creep-fatigue life time, Nsub(h) is the creep-fatigue life under tension strain hold conditions, and α and C are constants depending on the material and testing temperature. From the equation the life prediction is possible for a given inelastic strain range Δ sub(epsilonsub(i)) if the constants α and C, and Dsub(c) are known. The value of α was found to be 0.62 and 0.74 for various austenitic stainless steels and NCF800 at 600 0 C and 700 0 C, respectively, and 0.69 for 1 1/4Cr-1/2Mo steel at 600 0 C. The value of C was found to be 0.50 and 0.59 for various austenitic stainless steels and NCF800 at 600 0 C and 700 0 C, respectively, and 0.49 for 1 1/4Cr-1/2Mo steel at 600 0 C. The creep rupture ductility Dsub(c) is available in the NRIM Creep Data Sheets up to 10 5 h for multi-heats of many kinds of heat resistant alloys. (author)

Study of the antithyroid and radioprotective properties of compounds of the 5 thione imidazolidines group; Etude des proprietes antithyroidiennes et radioprotectrices de composes de la famille des 5 thione imidazolidines

Energy Technology Data Exchange (ETDEWEB)

Rinaldi, R; Bernard, Y [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

1961-07-01

Some compounds of the 5 thione imidazolidines group were synthesized by conventional or original methods, and this study is aimed at defining certain pharmacodynamic properties which these substances may be expected to show on the basis of their structure. The properties looked for are: - antithyroid activity, by studying the difference in iodine 131 fixation by the thyroid of rats previously treated or not with these materials; - radioprotective activity, by the comparative study of percentage survival; after 30 days, of mice subjected to a lethal dose of X radiation and having received or not, before irradiation, an intraperitoneal injection of the product under investigation. (author) [French] La synthese de quelques composes de la famille des 5 thione imidazolidines a ete realisee par des methodes classiques ou originales, et le but de ce travail est d'essayer de preciser certaines proprietes pharmacodynamiques que la structure de ces substances peut laisser prevoir. Les proprietes recherchees sont: - l'activite antithyroidienne par l'etude de la difference de la fixation de l'iode 131 par la thyroide de rats prealablement traites ou non par ces produits; - l'activite radioprotectrice par l'etude comparative du pourcentage de survie a 30 jours chez des souris soumises a une dose lethale de rayonnement X, et ayant recu ou non, avant irradiation une injection intraperitoneale du produit a etudier. (auteur)

Creep buckling of shells

International Nuclear Information System (INIS)

Stone, C.M.; Nickell, R.E.

1977-01-01

Because of the characteristics of LMFBR primary piping components (thin-walled, low pressure, high temperature), the designer must guard against creep buckling as a potential failure mode for certain critical regions, such as elbows, where structural flexibility and inelastic response may combine to concentrate deformation and cause instability. The ASME Boiler and Pressure Vessel Code, through its elevated temperature Code Case 1592 (Section III, Division 1) provides design rules for Class 1 components aimed at preventing creep buckling during the design life. A similar set of rules is being developed for Class 2 and 3 components at this time. One of the original concepts behind the creep buckling rules was that the variability in creep properties (especially due to the effects of prior heat treatment), the uncertainty about initial imperfections, and the lack of confirmed accuracy of design analysis meant that conservatism would be difficult to assure. As a result, a factor of ten on service life was required (i.e. analysis must show that, under service conditions that extrapolate the life of the component by ten times, creep buckling does not occur). Two obvious problems with this approach are that: first, the creep behavior must also be extrapolated (since most creep experiments are terminated at a small fraction of the design life, extrapolation of creep data is already an issue, irrespective of the creep buckling question); second the nonlinear creep analysis, which is very nearly prohibitively expensive for design life histograms, becomes even more costly. Analytical results for an aluminum cylindrical shell subjected to axial loads at elevated temperatures are used to examine the supposed equivalence of two types of time-dependent buckling safety factors - a factor of ten on service life and a factor of 1.5 on loading

New measurements in plutonium L X ray emission spectrum using an electron probe micro-analyser; Nouvelles mesures dans le spectre d'emission L du plutonium au moyen d'un micro analyseur a sonde electronique

Energy Technology Data Exchange (ETDEWEB)

Bobin, J L; Despres, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-07-01

Further studies by means of an electron-probe micro-analyser, allowed report CEA-R--1798 authors to set up a larger plutonium X ray spectrum table. Measurements of plutonium L{sub II} and L{sub III} levels excitation potentials have also been achieved. Some remarks about apparatus performance data (such as spectrograph sensibility, resolving power and accuracy) will be found in the appendix. (authors) [French] Poursuivant les etudes exposees dans le rapport CEA-R--1798, les auteurs ont pu dresser un tableau plus etendu du spectre L du plutonium, au moyen du micro-analyseur a sonde electronique. Ils ont egalement effectue des mesures de potentiel d'excitation des niveaux L{sub II} et L{sub III} du plutonium. On trouvera en annexe quelques notes sur les constantes d'appareillage (sensibilite, pouvoir de resolution et precision des spectrographes). (auteurs)

Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

Energy Technology Data Exchange (ETDEWEB)

Dubois, F. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces

Chronological study of beryllium plasma produced by a laser beam; Etude chronologique du plasma de beryllium cree par le faisceau d'un laser

Energy Technology Data Exchange (ETDEWEB)

Langer, Ph; Tonon, G; Durand, Y; Buges, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

l'evolution du plasma pendant toute la duree de l'impulsion laser (largeur a mi-hauteur 40 ns). Ce plasma, visible a partir de - 60 ns (l'origine des temps est prise au sommet de l'impulsion laser) subit une acceleration uniforme de - 30 a + 5 ns; a cet instant sa vitesse d'expansion est maximum et vaut 10{sup 7}cm/s, Des ions Be{sup +}, Be{sup 2+} et Be{sup 3+} (correspondant a un potentiel d'ionisation de 153 eV) sont emis par le plasma des sa creation et possedent une energie cinetique maximum de 1500 eV. L'etude spectroscopique du plasma a mis en evidence l'apparition de raies de recombinaison du beryllium une fois ionise et du beryllium excite a partir respectivement de + 70 ns et + 120 ns. Ces raies sont encore visibles au-dela de + 470 ns et + 720 ns. Des mesures interferometriques effectuees sur ce plasma nous ont revele que sa densite electronique n'est pas uniforme et decroit rapidement au fur et a mesure que l'on s'eloigne de la cible. Par exemple a 0,3 mm de la surface de la cible elle est respectivement de 2,3. 10{sup 18} e/cm{sup 3} et de 5,5. 10{sup 17} e/cm{sup 3} aux instants + 20 ns et + 40 ns. (auteurs)

Thermal decomposition of uranyl nitrate hexahydrate. Study of intermediate reaction products; Decomposition thermique du nitrate d'uranyle hexahydrate etude des intermediaires de cette decomposition

Energy Technology Data Exchange (ETDEWEB)

Chottard, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1970-07-01

The thermal decomposition of uranyl nitrate hexahydrate has been carried but at constant pressure and constant rate of reaction. The following intermediary products have been shown to exist and isolated: UO{sub 2}(NO{sub 3}){sub 2}.3H{sub 2}O; UO{sub 2}(NO{sub 3}){sub 2}. 2H{sub 2}O; UO{sub 2}(NO{sub 3}){sub 2}. H{sub 2}O; UO{sub 2}(NO{sub 3}){sub 2} and UO{sub 3}. These products, together with the hexahydrate UO{sub 2} (NO{sub 3}){sub 2}.6H{sub 2}O, have been studied by: - X-ray diffraction, using the Debye-Scherrer method.- infra-red spectrography: determination of the type of bonding for the water and the nitrate groups. - nuclear magnetic resonance: study of the mobility of water molecules. The main results concern: - the water molecule bonds in the series of hydrates with 6.3 and 2 H{sub 2}O. - isolation and characterization of uranyl nitrate monohydrate, together with the determination of its molecular structure. - the mobility of the water molecules in the series of the hydrates with 6.3 and 2 H{sub 2}O. An analysis is made of the complementary results given by infra-red spectroscopy and nuclear magnetic resonance; they are interpreted for the whole of the hydrate series. [French] La decomposition thermique du nitrate d'uranyle hexahydrate a ete effectuee en operant a pression et vitesse de decomposition constantes. Les produits intermediaires suivants ont ete mis en evidence et isoles: UO{sub 2}(NO{sub 3}){sub 2}, 3H{sub 2}O; UO{sub 2}(NO{sub 3}){sub 2}, 2H{sub 2}O; UO{sub 2}(NO{sub 3}){sub 2},H{sub 2}O; UO{sub 2}(NO{sub 3}){sub 2} et UO{sub 3}. Ces composes, ainsi que l'hexahydrate UO{sub 2}(NO{sub 3} ){sub 2}, 6H{sub 2}O ont ete etudies par: - diffraction des rayons X, selon la methode Debye-Scherrer.- spectrographie infra-rouge: determination des modes de liaison de l'eau et des groupements nitrate. - resonance magnetique nucleaire: etude de la mobilite des molecules d'eau. Les principaux resultats portent sur: - les liaisons des molecules d'eau dans la

Creep of titanium--silicon alloys

International Nuclear Information System (INIS)

Paton, N.E.; Mahoney, M.W.

1976-01-01

Operative creep mechanisms in laboratory melts of Ti-5Zr-0.5Si and Ti-5Zr-0.5Si have been investigated as a function of microstructure, creep stress, and temperature. From creep rate data and transmission electron microscopy results, it has been shown that an important creep strengthening mechanism at 811 0 K in Si-bearing Ti alloys is clustering of solute atoms on dislocations. All of the alloys investigated showed anomalously high apparent activation energies and areas for creep and a high exponent (n) in the Dorn equation. In addition, the effect of heat treatment was investigated and it is shown that the highest creep strength was obtained by using a heat treatment which retained the maximum amount of silicon in solution. This is consistent with the proposed creep strengthening mechanism. An investigation of the creep behavior of several other Si containing alloys including two commercial alloys, Ti-11 and IMI-685 indicated similar results. 12 fig., 6 tables

Study on the effect of prior fatigue and creep-fatigue damage on the fatigue and creep characteristics of 316 FR stainless steel. 2nd report. The effect of prior creep-fatigue damage on the creep and fatigue characteristics

International Nuclear Information System (INIS)

Yamauchi, Masafumi; Chuman, Yasuharu; Otani, Tomomi; Takahashi, Yukio

2001-01-01

The effect of prior creep-fatigue damage on the creep and the fatigue characteristics was studied to investigate the creep-fatigue life evaluation procedure of 316FR stainless steel. Creep and fatigue tests were conducted at 550degC by using the specimen exposed to prior creep-fatigue cycles at the same temperature and interrupted at 1/4 Nf, 1/2 Nf and 3/4 Nf cycle. The creep and fatigue strength of the pre-damaged material showed monotonic reduction with the prior creep-fatigue damage compared with the virgin material. The creep ductility also showed monotonic reduction with the prior creep-fatigue damage. These results were evaluated by the stress-based Time Fraction Rule and the strain-based Ductility Exhaustion Method. The result showed that the application of the Ductility Exhaustion Method to the creep-fatigue damage evaluation is more promising than the Time Fraction Rule. (author)

Study of the fluctuations of the partial and total radiative widths by neutron capture resonance method; Etude des fluctuations des largeurs radiatives partielles et totales par la capture des neutrons de resonance

Energy Technology Data Exchange (ETDEWEB)

Huynh, V D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

Radiative capture experiments by neutron time-of-flight methods have been made for following studies: distribution of partial radiative widths, effects of correlation between different radiative transitions, fluctuations of total radiative widths {gamma}{sub {gamma}} from resonance to resonance, variation of {gamma}{sub {gamma}} with number of mass and the search for the existence of potential capture. Also, some other experiments with the use of neutron capture gamma-rays spectra have been investigated. (author) [French] Par la capture des neutrons de resonance dont les energies sont selectionnees a l'aide de la technique du temps de vol, differents types d'experiences ont ete realisees concernant les etudes des distributions des largeurs radiatives partielles, des effets de correlation entre differentes voies de desexcitation, de la fluctuation des largeurs radiatives totales {gamma}{sub {gamma}} de resonance a resonance, de la variation de la quantite {gamma}{sub {gamma}} en fonction du nombre de masse et de la mise en evidence de l'existence du processus de capture potentielle. Quelques autres applications de l'emploi du spectre de rayons gamma ont egalement ete presentees. (auteur)

Prediction of long-term creep curves

International Nuclear Information System (INIS)

Oikawa, Hiroshi; Maruyama, Kouichi

1992-01-01

This paper aims at discussing how to predict long-term irradiation enhanced creep properties from short-term tests. The predictive method based on the θ concept was examined by using creep data of ferritic steels. The method was successful in predicting creep curves including the tertiary creep stage as well as rupture lifetimes. Some material constants involved in the method are insensitive to the irradiation environment, and their values obtained in thermal creep are applicable to irradiation enhanced creep. The creep mechanisms of most engineering materials definitely change at the athermal yield stress in the non-creep regime. One should be aware that short-term tests must be carried out at stresses lower than the athermal yield stress in order to predict the creep behavior of structural components correctly. (orig.)

Transformation-Induced Creep and Creep Recovery of Shape Memory Alloy.

Science.gov (United States)

Takeda, Kohei; Tobushi, Hisaaki; Pieczyska, Elzbieta A

2012-05-22

If the shape memory alloy is subjected to the subloop loading under the stress-controlled condition, creep and creep recovery can appear based on the martensitic transformation. In the design of shape memory alloy elements, these deformation properties are important since the deflection of shape memory alloy elements can change under constant stress. The conditions for the progress of the martensitic transformation are discussed based on the kinetics of the martensitic transformation for the shape memory alloy. During loading under constant stress rate, temperature increases due to the stress-induced martensitic transformation. If stress is held constant during the martensitic transformation stage in the loading process, temperature decreases and the condition for the progress of the martensitic transformation is satisfied, resulting in the transformation-induced creep deformation. If stress is held constant during the reverse transformation stage in the unloading process, creep recovery appears due to the reverse transformation. The details for these thermomechanical properties are investigated experimentally for TiNi shape memory alloy, which is most widely used in practical applications. The volume fraction of the martensitic phase increases in proportion to an increase in creep strain.

Creep fracture mechanics analysis for through-wall cracked pipes under widespread creep condition

International Nuclear Information System (INIS)

Huh, Nam Su; Kim, Yun Jae; Kim, Young Jin

2003-01-01

This paper compares engineering estimation schemes of C * and creep COD for circumferential and axial through-wall cracked pipes at elevated temperatures with detailed 3-D elastic-creep finite element results. Engineering estimation schemes included the GE/EPRI method, the reference stress method where reference stress is defined based on the plastic limit load and the enhanced reference stress method where the reference stress is defined based on the optimized reference load. Systematic investigations are made not only on the effect of creep-deformation behaviour on C * and creep COD, but also on effects of the crack location, the pipe geometry, the crack length and the loading mode. Comparison of the FE results with engineering estimations provides that for idealized power law creep, estimated C * and COD rate results from the GE/EPRI method agree best with FE results. For general creep-deformation laws where either primary or tertiary creep is important and thus the GE/EPRI method is hard to apply, on the other hand, the enhanced reference stress method provides more accurate and robust estimations for C * and COD rate than the reference stress method

Theoretical study for a digital transfer function analyser; Etude theorique pour un transferometre digital

Energy Technology Data Exchange (ETDEWEB)

Freycenon, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

This study deals with the harmonic analysis of the instantaneous counting rate of a pulse train. This arises from using a fission chamber for reactivity to power transfer function measurements by oscillation methods in reactors. The systematical errors due to the sampling process are computed. The integration carried out when sampling the signal modifies the formulae of the Nyquist theorem on spectrum folding. The statistical errors due to the noise are analysed: it is shown that the bandwidth of the spectral window applied to the noise frequency spectrum is equal to the inverse of the time duration of the experiment. A dead time of 25 per cent of the sampling time does not increase appreciably the bandwidth. A new method is proposed afterwards yielding very approximate results of the Fourier analysis during the experiment. The systematical errors arising from the measuring process are determined, and it is shown that the bandwidth of the corresponding spectral window is still given by the inverse of the time duration of the experiment. (author) [French] Cette etude se rapporte a l'analyse harmonique de la valeur instantanee du taux de comptage d'une suite d'impulsions. On rencontre ce probleme dans l'utilisation de chambres a fission pour les mesures de fonction de transfert reactivite-puissance par la methode d'oscillation dans les piles. On calcule l'erreur systematique due au processus d'echantillonnage ou l'integration operee modifie les formules classiques de recouvrement du spectre. On analyse ensuite les erreurs statistiques dues au bruit de fond. On montre que la largeur de bande de la fenetre spectrale appliquee au spectre de puissance du bruit est donnee par l'inverse du temps de mesure. Un temps mort de 25 pour cent du temps de prelevement n'accroit pas sensiblement cette largeur de bande. On propose ensuite un procede simple qui permet d'obtenir, en cours d'experience, des resultats tres approches de l'analyse de Fourier. On determine les erreurs

Dosage of plutonium by isotopic dilution in irradiated fuels; Dosage du plutonium par dilution isotopique dans les combustibles irradies

Energy Technology Data Exchange (ETDEWEB)

Lucas, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

collaboration entre SECACI (Section d'Etudes Chimique et Analytique des Combustibles Irradies) et SSM (Section de Spectrometrie de Masse). SECACI a mis a notre disposition les locaux et le materiel necessaire dans ses laboratoires de Fontenay. Cette etude a mis en evidence l'importance du cycle de valence celui-ci doit permettre d'obtenir une repartition isotopique homogene dans les melanges echantillon-traceur et une separation U/Pu convenable. Or, nous avons constate que la presence d'un exces d'uranium modifie profondement la cinetique des reactions d'oxydo-reduction du plutonium. Nous avons donc ete amenes a changer certains points de la technique operatoire pour rendre ce cycle efficace et ameliorer de ce fait la separation U/Pu; la stabilite de l'emission thermoionique du plutonium, liee a la quantite d'uranium residuaire, a du meme coup ete amelioree, et, nous obtenons maintenant des analyses isotopiques plus precises. D'autre part, nous nous sommes efforces d'eliminer au maximum les contaminations isotopiques en employant un mode operatoire plus rationnel; le materiel utilise a fait l'objet d'une etude particuliere. Les evaporations sont conduites de facon a interdire l'existence de vapeurs saturantes a l'interieur des boites a gants. Le materiel qui ne peut etre change a chaque operation est soigneusement nettoye a chaque changement d'echantillons. Avec cette technique, un second etalonnage du traceur T{sub 2} a ete entrepris au moyen d'une nouvelle solution etalon. Preparee tres soigneusement, par pesee d'uranium et de plutonium de purete chimique connue, nous pensons que cette solution offre des garanties suffisantes pour servir de reference. La valeur du rapport {sup 233}U/{sup 242}Pu du traceur a ete obtenue avec une precision relative de 0,5 pour cent. Cette methode modifiee est appliquee actuellement a l'analyse des barreaux irradies dans G-3. (auteur)

Etude de facteurs de risque de la transmission du VIH de la mère à l ...

African Journals Online (AJOL)

Introduction: L'infection à VIH chez la femme enceinte a pour principal risque la contamination du nouveau-né. L'objectif est de déterminer letaux de transmission du VIH de la mère à l'enfant (TME) dans la ville de Lubumbashi et en évaluer les facteurs de risque. Méthodes: Il s'agissait d'une étude prospective transversale ...

Creep in buffer clay

International Nuclear Information System (INIS)

Pusch, R.; Adey, R.

1999-12-01

The study involved characterization of the microstructural arrangement and molecular forcefields in the buffer clay for getting a basis for selecting suitable creep models. It is concluded that the number of particles and wide range of the particle bond spectrum require that stochastical mechanics and thermodynamics will be considered and they are basic to the creep model proposed for predicting creep settlement of the canisters. The influence of the stress level on creep strain of MX-80 clay is not well known but for the buffer creep is approximately proportional to stress. Theoretical considerations suggest a moderate impact for temperatures up to 90 deg C and this is supported by model experiments. It is believed that the assumption of strain being proportional to temperature is conservative. The general performance of the stochastic model can be illustrated in principle by use of visco-elastic rheological models implying a time-related increase in viscosity. The shear-induced creep settlement under constant volume conditions calculated by using the proposed creep model is on the order of 1 mm in ten thousand years and up to a couple of millimeters in one million years. It is much smaller than the consolidation settlement, which is believed to be on the order of 10 mm. The general conclusion is that creep settlement of the canisters is very small and of no significance to the integrity of the buffer itself or of the canisters

Metallurgical principles of creep processes

International Nuclear Information System (INIS)

Bolton, C.J.

1977-12-01

A brief review is presented of current theories of a number of the physical processes which can be involved in deformation and fracture under creep conditions. The processes considered are power law creep, diffusion creep, grain boundary sliding, cavitation and other modes of failure, and creep crack growth. The note concludes with some suggestions for future work. (author)

Low stress creep of stainless steel

International Nuclear Information System (INIS)

Crossland, I.G.; Clay, B.D.; Baker, C.

1976-06-01

The creep of 20%Cr, 25%Ni, Nb stainless steel has been examined at temperatures from 675 to 775 0 C at sheer stressed below 13 MPa and grain sizes from 6 to 20μm. The results have indicated that the initial creep rates were linearly dependent upon stress but with a threshold stress below which no creep occurred, i.e. Bingham behaviour; in addition, the creep activation energy at small strains was substantially lower than the lattice self-diffusion value and the initial creep rates were approximately related to the grain size through an inverse cube relation. It has been concluded that at low strains (approaching the initial elastic deflection) the creep mechanism was probably that of grain boundary diffusion creep (Coble, 1963) and this is further supported by the close agreement between the observed and theoretically predicted creep rate values. Steady-state creep rates were not observed; initially the creep rates fell rapidly with strain after which a more gradual decrease occurred. Whilst the creep rate - stress relationship continued to be of a Bingham form, the progressive reduction in creep rate with strain was found to be mainly attributable to an increase in the effective viscosity, threshold stress effects being generally of secondary importance. A model has been proposed which explains the initial creep rates as being due to Cable creep with elastic accommodation at grain boundary particles. At higher strains grain boundary collapse caused by vacancy sinking is accommodated at precipitate particles by plastic deformation of the adjacent matrix material. (author)

Irradiation creep models - an overview

International Nuclear Information System (INIS)

Matthews, J.R.; Finnis, M.W.

1988-01-01

The modelling of irradiation creep is now highly developed but many of the basic processes underlying the models are poorly understood. A brief introduction is given to the theory of cascade interactions, point defect clustering and dislocation climb. The range of simple irradiation creep models is reviewed including: preferred nucleation of interstitial loops; preferred absorption of point defects by dislocations favourably orientated to an applied stress; various climb-enhanced glide and recovery mechanisms, and creep driven by internal stresses produced by irradiation growth. A range of special topics is discussed including: cascade effects; creep transients; structural and induced anisotropy; and the effect of impurities. The interplay between swelling and growth with thermal and irradiation creep is emphasized. A discussion is given on how irradiation creep theory should best be developed to assist the interpretation of irradiation creep observations and the requirements of reactor designers. (orig.)

Contribution to the study of french pitchblendes; Contribution a l'etude des pechblendes francaises

Energy Technology Data Exchange (ETDEWEB)

Geffroy, J [Commissariat a l' Energie Atomique, Lab. de Mineralogie, Centre de Chatillon (France). Centre d' Etudes Nucleaires; Sarcia, J A [Commissariat a l' Energie Atomique, Div. de la Crouzille, Haute Vienne (France). Centre d' Etudes Nucleaires

1955-07-01

The authors first review the characteristics of uraninite-pitchblende, as deduced of present literature. They set apart from typical pitchblende a black oxide aspect, which probably corresponds to neo-formations, and a 'para-pitchblende' aspect, which they relate to deep sur-oxidation of normal pitchblende. They insist on the easy replacement of pitchblende by silica. and give indications as to changes in vein stones (fluorite, quartz, etc...). A detailed study of paragenesis and successions in french uranium districts follows (including discussion of uranium of uranium-bearing coals). The authors attempt to classify french pitchblende veins. They are chiefly epithermal and poor in satellite ores. Three types of deposits are identified: massive - pitchblende type, silica type, fluorite type. These deposits, as those of Portugal, are included in granite, Central-European peri-batholitic types where uranium associates which Ni, Co, Bi and Ag, are in France both rare and poor. Finally, the authors attempt to bring out in the european Hercynian area a particular distribution of paragenetic types. (authors) [French] Les auteurs recapitulent d'abord les caracteres et les occurences de l'uraninite - pechblende, tels qu'ils peuvent etre degages de l'actuelle bibliographie. Ils exposent ensuite les faits qui du point de vue mineralogique seulement ressortent de l'etude mineralogique et chalcographique des pechblendes francaises et de leurs satellites. Ils distinguent de la pechblende-type un facies oxyde noir; correspondant probablement a une neoformation, et un facies parapechblende, qui est rapporte a une sur oxydation hypogene de la pechblende proprement dite. Ils insistent sur le facile remaniement de la pechblende par la slice; et donnent quelques precisions sur les modifications des gangues (fluorine, quartz, etc...). Suit l'etude detaillee des parageneses et des successions dans les districts uraniferes francais: Divisions du Limousin, de Grury, de Lachaux et de

Study of microinstabilities due to an anisotropic velocity distribution function of the particles of a homogeneous plasma; Etude des microinstabilities liees a l'anisotropie de la fonction de distribution des vitesses des particules d'un plasma homogene

Energy Technology Data Exchange (ETDEWEB)

Hennion, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-06-01

A study is made of instabilities in a plasma with an ion velocity distribution function of the form: f{sub oi} = 1 / (2*{pi}*{alpha}{sub p}e{sub i}*{alpha}{sub p}a{sub i}) * {lambda}({nu}{sub p}e - {alpha}{sub p}e{sub i}) * e{sup -}(v{sub pa2}/{alpha}{sub pai2}). The plasma is assumed to have finite dimensions limited by infinitely conductive boundary surfaces. A theoretical and numerical analysis of marginal stability locates the regions of stability as a function of several parameters; i.e. plasma length, ion anisotropy ({tau}) and electron temperature (T{sub e}). A limiting plasma length is found, below which the plasma is stable regardless of its density. For the parameters of the injection experiment M.M.I.I. at Fontenay-aux-roses it is found that the type of instabilities studied here should not occur. (author) [French] L'etude est faite en choisissant une fonction de distribution des ions de la forme f{sub oi} = 1 / (2*{pi}*{alpha}{sub p}e{sub i}*{alpha}{sub p}a{sub i}) * {lambda}({nu}{sub p}e - {alpha}{sub p}e{sub i}) * e{sup -}(v{sub pa2}/{alpha}{sub pai2}) et en supposant une conductivite infinie sur les limites du plasma de dimensions finies. L'etude theorique et numerique de la stabilite marginale determine les domaines de stabilite qui sont etudies en fonction de plusieurs parametres: longueur du plasma, anisotropie des ions ({tau}), temperature electronique (T{sub e}). Il apparait une longueur limite du plasma au-dessous de laquelle le plasma est stable, independemment de la densite. L'application faite avec les valeurs des parametres de l'experience d'injection M.M.I.I, a Fontenay-aux-Roses permet de conclure a la non existence dans cet appareil du type d'instabilite etudie ici. (auteur)

Multiaxial creep-fatigue rules

International Nuclear Information System (INIS)

Spindler, M.W.; Hales, R.; Ainsworth, R.A.

1997-01-01

Within the UK, a comprehensive procedure, called R5, is used to assess the high temperature response of structures. One part of R5 deals with creep-fatigue initiation, and in this paper we describe developments in this part of R5 to cover multiaxial stress states. To assess creep-fatigue, damage is written as the linear sum of fatigue and creep components. Fatigue is assessed using Miner's law with the total endurance split into initiation and growth cycles. Initiation is assessed by entering the curve of initiation cycles vs strain range using a Tresca equivalent strain range. Growth is assessed by entering the curve of growth cycles vs strain range using a Rankine equivalent strain range. The number of allowable cycles is obtained by summing the initiation and growth cycles. In this way the problem of defining an equivalent strain range applicable over a range of endurance is avoided. Creep damage is calculated using ductility exhaustion methods. In this paper we address two aspects; first, the nature of stress relaxation and, hence, accumulated creep strain in multiaxial stress fields; secondly, the effect of multiaxial stress on creep ductility. The effect of multiaxial stress state on creep ductility has been examined using experimental data and mechanistic models. Good agreement is demonstrated between an empirical description of test data and a cavity growth model, provided a simple nucleation criterion is included. A simple scaling factor is applied to uniaxial creep ductility, defined as a function of stress state. The factor is independent of the cavity growth mechanisms and yields a value of equivalent strain which can be conveniently used in determining creep damage by ductility exhaustion. (author). 14 refs, 4 figs

Modeling of creep-fatigue interaction of zirconium {alpha} under cyclic loading at 200 C; Modelisation du comportement et de l`endommagement en fatigue-fluage du zirconium {alpha} a 200C

Energy Technology Data Exchange (ETDEWEB)

Vogel, C.

1996-04-01

The present work deals with mechanical behaviour of zirconium alpha at 200 deg. C and crack initiation prediction methods, particularly when loading conditions lead to interaction of fatigue and creep phenomena. A classical approach used to study interaction between cyclic effects and constant loading effects does not give easy understanding of experimental results. Therefore, a new approach has been developed, which allow to determine a number of cycles for crack initiation for complex structures under large loading conditions. To study influence of fatigue and creep interaction on crack initiation, a model was chosen, using a scalar variable, giving representation of the material deterioration state. The model uses a non linear cumulating effect between the damage corresponding to cyclic loads and the damage correlated to time influence. The model belongs to uncoupled approaches between damage and behaviour, which is described here by a two inelastic deformations model. This mechanical behaviour model is chosen because it allows distinction between a plastic and a viscous part in inelastic flow. Cyclic damage is function of stress amplitude and mean stress. For the peculiar sensitivity of the material to creep, a special parameter bas been defined to be critical toward creep damage. It is the kinematic term associated to state variables describing this type of hardening in the viscous mechanism. (author).

Chrono-potentiometry in molten chlorides. Application to the study of the electrochemical properties of uranium and plutonium in the LiCl-KCl eutectic; Chronopotentiometrie dans les chlorures fondus. Application a l'etude des proprietes electrochimiques de l'uranium et du plutonium dans l'eutectique LiCl-KCl

Energy Technology Data Exchange (ETDEWEB)

Leseur, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-05-01

Using solutions of cadmium chloride in the eutectic LiCl-KCl, a chrono-potentiometric method has been developed with a view to its application to the study of molten solutions. Particular attention has been paid to the choice of the indicator electrodes. The method makes it possible to analyze molten solutions quantitatively and to determine diffusion coefficients and their activation energies; it yields furthermore information about the nature and the behaviour of ionic species in solution. The method has been applied to the study of solutions of uranium and plutonium chloride in the eutectic LiCl-KCl. Linear chrono-amperometry has been used for studying these solutions quantitatively, but chrono-potentiometry, of which the theory is better developed, is better suited to a quantitative study. The results obtained have made it possible to determine the diffusion coefficients of the ions Cd{sup 2+}, U{sup 3+}, U{sup 4+} and U(IV) in the presence of F{sup -} and Pu{sup 3+} ions, as well as the activation energy of the diffusion coefficients. (author) [French] La mise au point de la chronopotentiometrie comme moyen d'etude des solutions fondues a ete effectuee avec des solutions de chlorure de cadmium dans l'eutectique LiCl-KCl. Le probleme du choix des electrodes indicatrices a ete particulierement etudie. La methode permet l'analyse quantitative des solutions fondues ainsi que la determination des coefficients de diffusion et de leurs energies d'activation: elle donne en outre des renseignements sur la nature et le comportement des especes ioniques en solution. Elle a ete appliquee a l'etude des solutions des chlorures d'uranium et de plutonium dans l'eutectique LiCl-KCl. La chronoamperometrie lineaire a ete utilisee pour l'etude qualitative de ces solutions, mais la chronopotentiometrie, dont la theorie est plus complete, convient mieux pour l'etude quantitative. Les resultats obtenus ont permis de determiner les

Strength and life under creeping

International Nuclear Information System (INIS)

Pospishil, B.

1982-01-01

Certain examples of the application of the Lepin modified creep model, which are of interest from technical viewpoint, are presented. Mathematical solution of the dependence of strength limit at elevated temperatures on creep characteristics is obtained. Tensile test at elevated temperatures is a particular case of creep or relaxation and both strength limit and conventional yield strength at elevated temperatures are completely determined by parameters of state equations during creep. The equation of fracture summing during creep is confirmed not only by the experiment data when stresses change sporadically, but also by good reflection of durability curve using the system of equations. The system presented on the basis of parameters of the equations obtained on any part of durability curve, permits to forecast the following parameters of creep: strain, strain rate, life time, strain in the process of fracture. Tensile test at elevated temperature is advisable as an addition when determining creep curves (time-strain curves) [ru

Nanogranular origin of concrete creep.

Science.gov (United States)

Vandamme, Matthieu; Ulm, Franz-Josef

2009-06-30

Concrete, the solid that forms at room temperature from mixing Portland cement with water, sand, and aggregates, suffers from time-dependent deformation under load. This creep occurs at a rate that deteriorates the durability and truncates the lifespan of concrete structures. However, despite decades of research, the origin of concrete creep remains unknown. Here, we measure the in situ creep behavior of calcium-silicate-hydrates (C-S-H), the nano-meter sized particles that form the fundamental building block of Portland cement concrete. We show that C-S-H exhibits a logarithmic creep that depends only on the packing of 3 structurally distinct but compositionally similar C-S-H forms: low density, high density, ultra-high density. We demonstrate that the creep rate ( approximately 1/t) is likely due to the rearrangement of nanoscale particles around limit packing densities following the free-volume dynamics theory of granular physics. These findings could lead to a new basis for nanoengineering concrete materials and structures with minimal creep rates monitored by packing density distributions of nanoscale particles, and predicted by nanoscale creep measurements in some minute time, which are as exact as macroscopic creep tests carried out over years.

The use tri-n-butyl phosphate in plutonium extraction. Radiolysis and recycling of the solvent (1963); Le phosphate de tri-n-butyle dans l'extraction du plutonium. Radiolyse et recyclage du solvant (1963)

Energy Technology Data Exchange (ETDEWEB)

Isaac, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

The work concerns the radiolysis and recycling of tri-n-butyl phosphate used as extraction solvent for plutonium. The radiolysis is studied on an industrial solvent using a cobalt 60 source. Figures are given for the yield of the mono- and di-butyl-phosphoric acids formed from the dry and water-saturated solvents and the influence of nitric acid on the formation of dibutyl-phosphoric acid is indicated. The recycling treatment of the solvent is reconsidered with a view to lowering the residual contamination due to fission products. The tests carried out on a solvent from the plutonium extraction plant at Marcoule show the efficiency of the sodium carbonate treatment. Of all the products studied, only caustic soda led to a better decontamination than sodium carbonate; in all cases however, the elimination of ruthenium is always incomplete. (author) [French] L'etude porte sur la radiolyse et le recyclage du phosphate de tri-n-butyle utilise comme solvant d'extraction du plutonium. La radiolyse est etudiee sur un solvant industriel a l'aide d'une source de cobalt 60. On donne les rendements de formation des acides mono- et dlbutylphosphoriques a partir de solvants secs et satures d'eau, et on montre l'influence de l'acide nitrique sur la formation de l'acide dibutylphosphorique. Le traitement de recyclage du solvant est repris en vue d'abaisser la contamination residuelle en produits de fission. Les essais, effectues sur un solvant provenant de l'usine d'extraction du plutonium de Marcoule, montrent l'efficacite du traitement au carbonate de sodium. De tous les reactifs etudies, seule la soude a donne une decontamination superieure au carbonate de sodium; mais dans tous les cas, l'elimination du ruthenium est toujours incomplete. (auteur)

Ion-molecule interactions of biological importance. A vibrational spectroscopic study of magnesium complexes with hydroxylated quinones; Interactions ions-molecules d'interet biologique. Etude par spectrometrie de vibrations de la complexation du magnesium avec des molecules quinoniques hydroxylees

Energy Technology Data Exchange (ETDEWEB)

Kirszenbaum, Marek

1976-06-14

complete des vibrations de l'anthraquinone-9,10, de ses deux derives hydroxyles et deuteroxyles et de complexes magnesies. Une etude des complexes substitues au {sup 24}Mg et {sup 26}Mg nous a permis d'attribuer les vibrations Mg-O; leur nombre correspondant au metal hexacoordonne pour l'acetylacetonate de magnesium et tetracoordonne pour les anthraquinone-olates de magnesium. La position des bandes de vibrations ν C=O et ν C-O des complexes montre que les liaisons du cycle chelate du Mg(1-O-AQ){sub 2} gardent leur caractere des liaisons simple et double, alors que dans le [Mg(1,4-O{sub 2}-AQ]{sub n} il y a une resonance des liaisons de ce cycle. L'etude des spectres IR et R des complexes a permis egalement de proposer la structure tetraedrique des oxygenes autour du magnesium. Nous avons remarque, de plus, que les liaisons Mg-O presentent un caractere covalent important. (auteur)

Tensile cracks in creeping solids

International Nuclear Information System (INIS)

Riedel, H.; Rice, J.R.

1979-02-01

The loading parameter determining the stress and strain fields near a crack tip, and thereby the growth of the crack, under creep conditions is discussed. Relevant loading parameters considered are the stress intensity factor K/sub I/, the path-independent integral C*, and the net section stress sigma/sub net/. The material behavior is modelled as elastic-nonlinear viscous where the nonlinear term describes power law creep. At the time t = 0 load is applied to the cracked specimen, and in the first instant the stress distribution is elastic. Subsequently, creep deformation relaxes the initial stress concentration at the crack tip, and creep strains develop rapidly near the crack tip. These processes may be analytically described by self-similar solutions for short times t. Small scale yielding may be defined. In creep problems, this means that elastic strains dominate almost everywhere except in a small creep zone which grows around the crack tip. If crack growth ensues while the creep zone is still small compared with the crack length and the specimen size, the stress intensity factor governs crack growth behavior. If the calculated creep zone becomes larger than the specimen size, the stresses become finally time-independent and the elastic strain rates can be neglected. In this case, the stress field is the same as in the fully-plastic limit of power law hardening plasticity. The loading parameter which determines the near tip fields uniquely is then the path-independent integral C*.K/sub I/ and C* characterize opposite limiting cases. The case applied in a given situation is decided by comparing the creep zone size with the specimen size and the crack length. Besides several methods of estimating the creep zone size, a convenient expression for a characteristic time is derived, which characterizes the transition from small scale yielding to extensive creep of the whole specimen

Modelling of degradation processes in creep resistant steels through accelerated creep tests after long-term isothermal ageing

Energy Technology Data Exchange (ETDEWEB)

Sklenicka, V.; Kucharova, K.; Svoboda, M.; Kroupa, A.; Kloc, L. [Academy of Sciences of the Czech Republic, Brno (Czech Republic). Inst. of Physics of Materials; Cmakal, J. [UJP PRAHA a.s., Praha-Zbraslav (Czech Republic)

2010-07-01

Creep behaviour and degradation of creep properties of creep resistant materials are phenomena of major practical relevance, often limiting the lives of components and structures designed to operate for long periods under stress at elevated and/or high temperatures. Since life expectancy is, in reality, based on the ability of the material to retain its high-temperature creep strength for the projected designed life, methods of creep properties assessment based on microstructural evolution in the material during creep rather than simple parametric extrapolation of short-term creep tests are necessary. In this paper we will try to further clarify the creep-strength degradation of selected advanced creep resistant steels. In order to accelerate some microstructural changes and thus to simulate degradation processes in long-term service, isothermal ageing at 650 C for 10 000 h was applied to P91 and P23 steels in their as-received states. The accelerated tensile creep tests were performed at temperature 600 C in argon atmosphere on all steels both in the as-received state and after long-term isothermal ageing, in an effort to obtain a more complete description of the role of microstructural stability in high temperature creep of these steels. Creep tests were followed by microstructural investigations by means of both transmission and scanning electron microscopy and by the thermodynamic calculations. The applicability of the accelerated creep tests was verified by the theoretical modelling of the phase equilibria at different temperatures. It is suggested that under restructed oxidation due to argon atmosphere microstructural instability is the main detrimental process in the long-term degradation of the creep rupture strength of these steels. (orig.)

Creep of crystals

International Nuclear Information System (INIS)

Poirier, J.-P.

1988-01-01

Creep mechanisms for metals, ceramics and rocks, effect of pressure and temperature on deformation processes are considered. The role of crystal defects is analysed, different models of creep are described. Deformation mechanisms maps for different materials are presented

A study of the aptitude of soils under natural conditions to retain radiostrontium; Etude de la vocation des sols en place a la retention du radiostrontium

Energy Technology Data Exchange (ETDEWEB)

Bovard, P; Grauby, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

Independently of the theoretical study of the propagation of radioactivity in the soil as a result of submersions or of radioactive rain, the authors have studied directly and practically how this radioactivity can vary in the actual soil. To this end a simple, rapid method has been perfected; it makes it possible to maintain for each soil sample the natural parameters (structure, humidity, etc.) without introducing boundary effects. In the laboratory, after charging the soil samples, part of the study of the propagation of radioactivity is done by autoradiography; finally, as a practical application, the study of an atomic site illustrates the methods described. (author) [French] Independamment de l'etude theorique de la propagation de la radioactivite dans le sol a la suite de submersions ou de pluies radioactives, les auteurs ont etudie directement et pratiquement comment pourrait evoluer cette radioactivite dans les sols en place. Pour cela, une methode simple et rapide a ete mise au point; elle permet de conserver pour chaque echantillon de sol, les parametres naturels (structure, humidite, etc...), sans introduire d'effets de paroi. En laboratoire, apres mise en charge des massifs preleves, une partie de l'etude de la propagation des radioelements est realisee par autoradiographie; enfin, une application pratique, l'etude d'un site atomique, illustre l'expose. (auteur)

A study of the aptitude of soils under natural conditions to retain radiostrontium; Etude de la vocation des sols en place a la retention du radiostrontium

Energy Technology Data Exchange (ETDEWEB)

Bovard, P.; Grauby, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

Independently of the theoretical study of the propagation of radioactivity in the soil as a result of submersions or of radioactive rain, the authors have studied directly and practically how this radioactivity can vary in the actual soil. To this end a simple, rapid method has been perfected; it makes it possible to maintain for each soil sample the natural parameters (structure, humidity, etc.) without introducing boundary effects. In the laboratory, after charging the soil samples, part of the study of the propagation of radioactivity is done by autoradiography; finally, as a practical application, the study of an atomic site illustrates the methods described. (author) [French] Independamment de l'etude theorique de la propagation de la radioactivite dans le sol a la suite de submersions ou de pluies radioactives, les auteurs ont etudie directement et pratiquement comment pourrait evoluer cette radioactivite dans les sols en place. Pour cela, une methode simple et rapide a ete mise au point; elle permet de conserver pour chaque echantillon de sol, les parametres naturels (structure, humidite, etc...), sans introduire d'effets de paroi. En laboratoire, apres mise en charge des massifs preleves, une partie de l'etude de la propagation des radioelements est realisee par autoradiographie; enfin, une application pratique, l'etude d'un site atomique, illustre l'expose. (auteur)

Solidification of residual fission-product solutions; laboratory studies; Solidification de solutions residuaires concentrees de produits de fission: etudes de laboratoire

Energy Technology Data Exchange (ETDEWEB)

Boniaud, R; Cohen, P; Sombret, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1961-07-01

This paper describes the results obtained, at laboratory scale, during the study of the incorporation of fission products into glasses and synthetic micas. The rate of leaching of fission products from the glass and their volatility during firing were measured. A hot cell was built to complete these results. (author) [French] Ce rapport resume le resultat des etudes faites en laboratoire (activite de l'ordre du millicurie) sur l'incorporation des produits de fission dans des verres et micas synthetiques. On a mesure le taux de lixiviation des produits de fission et leur volatilisation au cours de la cuisson. Une cellule chaude a ete installee pour completer ces resultats au moyen d'essais realises avec une activite superieure. (auteur)

The study of some thiazinic and indaminic dye syntheses induced by ionising radiation; Etude de quelques syntheses de colorants thianziniques et indaminiques amorcees par les rayonnements ionisants

Energy Technology Data Exchange (ETDEWEB)

Balestic, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-03-15

grace a leur spectre d'absorption apres qu'ils aient ete separes du milieu reactionnel par chromatographie d'adsorption ou d'echange d'ions; d'autres produits de la radiolyse, chlorure d'ammonium et eau oxygenee, ont ete egalement caracterises. Au cours d'une etape ulterieure, une variation systematique des parametres physico-chimiques a permis de determiner les conditions les plus favorables a la radiosynthese; les rendements radiochimiques maximum obtenus ont pour valeurs respectives: G (Violet de Lauth) = 1,65; G (Bleu de Methylene) = 1,75. En outre, l'etude de l'influence sur le rendement radiochimique des reactifs amines differemment substitues a fait apparaitre la possibilite de synthetiser par voie radiochimique le Vert de Bindschedler et le Bleu de Wurster. Enfin la decouverte d'un compose intermediaire fondamental, le Rouge de Wurster, ainsi que l'etude cinetique de la synthese chimique du Bleu de Methylene ont permis de determiner les principales etapes du Bleu de Methylene reactionnel et de preciser la part qui revenait aux rayonnements ionisants dans le cas de la synthese par voie radiochimique. (auteur)

The use of tracers in the study of the ionic permeability of the nerve; Utilisation des indicateurs nucleaires dans l'etude de la permeabilite ionique du nerf

Energy Technology Data Exchange (ETDEWEB)

Guinnebault, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

The use of the radioactive tracers {sup 24}Na and {sup 42}K, and the electrophysiological fine study carried out on the plant Cephalopods nervous cells have made it possible, during ten years, to study the relationships between the electrical phenomena observed during the propagation of the nervous impulse and the ionic movements which occur at the cell membrane between the intra- and extra-cellular media. In the state of rest, the nerve fibres present a certain permeability towards sodium and potassium, a permeability which allows the renewal, from the extra-cellular medium, of the cations contained in the cytoplasm. At the moment of the passage of the nervous impulse, it is possible to demonstrate a temporary increase in the permeability towards the sodium which causes the entry of Na{sup +} ions into the nerve fibre, whilst, a few milliseconds later, the increase in the potassium permeability causes the departure of an equivalent quantity of K{sup +} ions. A recovery phase follows the passage of the nervous impulse, during which the original ionic conditions are re-established. If the potassium movements can be considered as passive, the expulsion of Na{sup +} requires, on the part of the cell, the use of a part of the metabolic energy. (author) [French] L'utilisation des indicateurs radioactifs {sup 24}Na et {sup 42}K, et l'etude electrophysiologique fine realisee sur des cellules nerveuses geantes de Cephalopodes a permis, depuis une dizaine d'annees, d'etudier les rapports entre les phenomenes electriques observes lors de la propagation de l'influx nerveux et les mouvements ioniques qui s'effectuent au niveau de la membrane cellulaire entre milieux intracellulaire et extracellulaire. A l'etat de repos, les fibres nerveuses possedent pour le sodium et le potassium, une permeabilite qui permet le renouvellement, a partir du milieu extracellulaire des cations contenus dans le cytoplasme. Au moment du passage de l'influx nerveux, on peut mettre en evidence une

Some ways for the investigation of the solar modulation of cosmic electrons; Moyens d'etude de la modulation solaire des electrons cosmiques

Energy Technology Data Exchange (ETDEWEB)

Mercier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

In this report, we are investigating the solar modulation of cosmic electrons, in different ways. By comparing the calculated intensity with the measured intensity of positrons, we can evaluate the solar modulation of positrons, hence the modulation of negatons, since the modulation of negatons is probably the same that for positrons. By comparing the electron spectrum in interstellar space needed to explain the galactic background radio emission with that observed near the earth, we can deduce information about the modulation of electrons. We can investigate the modulation through the observation of its variations during the solar cycle. This different ways lead us to compatible results. In spite of the fact that the precision of the experimental data is poor, the modulation can be represented by: a constant or a form in exp(- K/Ro{beta}) under the rigidity Ro {approx_equal} 0,5 BV; a form in exp(- K/R) or exp(- K/R{beta}) above this rigidity. In addition, the investigation of both electrons and protons displays that the diffusion-convection theory is inadequate to explain all the features of the solar modulation. (author) [French] Dans le present rapport, nous etudions la modulation solaire des electrons cosmiques a l'aide de plusieurs methodes. Par comparaison entre l'intensite calculee et l'intensite mesuree des positons, on peut evaluer la modulation solaire des positons, et aussi des negatons, puisque la modulation des negatons est probablement la meme que celle des positons. Par le calcul, a partir du bruit de fond radio, du flux des electrons a l'exterieur du systeme solaire et sa confrontation avec le flux observe a l'orbite de la Terre permet l'etude de la modulation solaire des electrons. On peut aussi analyser ce phenomene de modulation pour l'etude de ses variations au cours du cycle solaire. Ces diverses methodes donnent des resultats compatibles. En depit de la precision mediocre des donnees experimentales, on peut caracteriser la modulation par: une

Study of the use of an electric discharge for hollow cathodes used as optical excitation sources in the spectrographic measurement of fluorine in thorium, uranium and plutonium; Etude de l'utilisation de la decharge electrique en cathode creuse comme source d'excitation optique pour le dosage spectrographique du fluor dans le thorium, l'uranium et le plutonium

Energy Technology Data Exchange (ETDEWEB)

Bufpereau, M; Crehange, G; Poublan, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Previous works and phenomena concerned with a hollow cathode excitation are reviewed. Experiments aimed specially on the determination of the best conditions for an analysis of fluorine in oxides-metals and solutions. In that purpose, several factors have been pointed out. One started some researches about others elements that fluorine. Carrying fluorine into discharge and excitation have been more specially studied. A quantitative analysis method is given. The analysis limit is 45 ppm about but the detection limit is 5 ppm about. As a conclusion, various ways for optical excitation of fluorine are reviewed as other analytical possibilities a hollow cathode discharge offers. (authors) [French] On rappelle les travaux effectues jusqu'alors ainsi que les phenomenes mis en jeu dans l'excitation cathode creuse. Les experiences effectuees ont eu pour but essentiel la determination des conditions optima du dosage du fluor dans les oxydes, metaux et solutions. Pour cela de nombreux facteurs ont ete mis en evidence. Certaines etudes concernant d'autres elements que le fluor ont ete amorcees. Le passage du fluor dans la decharge et son excitation ont ete plus particulierement etudies. Une methode d'analyse quantitative est degagee, la limite de dosage est de l'ordre de 45 ppm, la limite de detection de 5 ppm. En conclusion, on passe en revue les differentes methodes d'excitation optique du fluor ainsi que les autres possibilites analytiques que peut offrir la cathode creuse. (auteurs)

A study on stress analysis of small punch-creep test and its experimental correlations with uniaxial-creep test

International Nuclear Information System (INIS)

Lee, Song In; Baek, Seoung Se; Kwon, Il Hyun; Yu, Hyo Sun

2002-01-01

A basic research was performed to ensure the usefulness of Small Punch-creep(SP-creep) test for residual life evaluation of heat resistant components effectively. This paper presents analytical results of initial stress and strain distributions in SP specimen caused by constant loading for SP-creep test and its experimental correlations with uniaxial creep(Ten-creep) test on 9CrlMoVNb steel. It was shown that the initial maximum equivalent stress, σ eq · max from FE analysis was correlated with steady-state equivalent creep strain rate, ε qf-ss , rupture time, t r , activation energy, Q and Larson-Miller parameter, LMP during SP-creep deformation. The simple correlation laws, σ SP - σ TEN , P SP -σ TEN and Q SP -Q TEN adopted to established a quantitative correlation between SP-creep and Ten-creep test data. Especially, the activation energy obtained from SP-creep test is linearly related to that from Ten-creep test at 650 deg. C as follows : Q SP-P =1.37 Q TEN , Q SP-σ =1.53 Q TEN

Realization of an electromagnetic isotope separator. Application to the isotopes of the mass 93 from the molybdenum and the technetium; Realisation d'un separateur electromagnetique d'isotope. Application a l'etude des isotopes de masse 93 du molybdene et du technetium

Energy Technology Data Exchange (ETDEWEB)

Bernas, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1954-07-15

Analysis of focusing properties of a homogeneous magnetic field leads the author to use a magnetic sector of 60 deg, for the realization of an electromagnetic separator. The sources of realized ions provide ionic debits of 10 mA. The currents ionic detached isotopes to the collector vary from 1 to 5 mA. The separation efficiency is of 125 for a current collected of 1 mA. A survey of the neutralization of the space charge permitted to specify the role of the negative ions in this phenomenon. A method of neutralization of the space charge is proposed and gave excellent results. A report will be given of the separations of some elements: mercury, bromine, thorium, etc... The application of the separator to the study of the isomeric transfers in the molybdenum and the technetium permitted to assign definitely for {sup 93}Mo and {sup 93}Tc two radiances {gamma} of respective energies 260 and 390 keV. A new process of fast chemical separation Mo/Tc is described. (author) [French] L'analyse des proprietes de focalisation d'un champ magnetique homogene conduit l'auteur, pour la realisation d'un separateur electromagnetique, a employer un secteur magnetique de 60 deg. Les sources d'ions realisees fournissent des debits ioniques de 10 mA. Les courants ioniques d'isotopes separes au collecteur varient de 1 a 5 mA. Le pouvoir separateur est de 125 pour un courant collecte de 1 mA. Une etude de la neutralisation de la charge d'espace a permis de preciser le role des ions negatifs dans ce phenomene. Une methode de neutralisation de la charge d'espace est proposee et a donne d'excellents resultats. On donne le compte rendu des separations de quelques elements: mercure, brome, thorium, etc... L'application du separateur a l'etude des translations isomeriques dans le molybdene et le technetium a permis d'attribuer definitivement a {sup 93}Mo et a {sup 93}Tc deux rayonnements {gamma} d'energies respectives 260 et 390

Etude expérimentale du séchage convectif à haute température d'un milieu granulaire

OpenAIRE

Messai , Souad; Sghaier , Jalila; Lecomte , Didier; Belghith , Ali

2008-01-01

International audience; Dans ce travail on présente une étude expérimentale et numérique du séchage convectif à haute température d'un milieu granulaire formé par des particules poreuses sphériques. La partie expérimentale a été consacrée à l'utilisation de l'air humide comme agent séchant. En prenant deux valeurs d'humidité relative de l'air, nous avons mis en évidence l'importance de ce paramètre sur le processus du séchage. Nous avons mesuré simultanément la cinétique de séchage du lit fix...

Electrochemical study of chemical properties in ethanolamine and its mixtures with water; Etude electrochimique de proprietes chimiques dans l'ethanolamine et ses melanges avec l'eau

Energy Technology Data Exchange (ETDEWEB)

Grall, M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-12-01

This work is concerned with the study of acid-base reactions and of complex formation in ethanolamine and its mixtures with water. The ionic product of the solvent has been determined by an electro-chemical study of the H{sup +}/H{sub 2} system. The reduction curves for ethanolamine-water mixtures, for different acidities, have made it possible to follow the variations in the size of the pH domain as a function of the composition of the solvent. The form of this variation has been explained on the basis of the dielectric constant and the solvation of the proton by the ethanolamine. In the second part, the electrochemical systems of mercury have been studied by anodic polarography. In order to establish a parallel between the acid-base reactions and complex formation reactions, we have studied the stability of Hg (CN){sub 2} in water-ethanolamine mixtures. It has been possible to deduce the law for the variation of pK{sub c} with solvent composition. The representative graph of this function passes through a minimum for a proportion of about 50 per cent of ethanolamine as in the case of acids. This variation has been explained by the predominating influence of {epsilon} for ethanolamine propositions of over 50 per cent and by that of the solvation of Hg{sup 2+} for proportions of under 50 per cent. (author) [French] Ce travail porte sur l'etude des reactions acides-bases et de formation de complexes dans l'ethanolamine et ses melanges avec l'eau. Le produit ionique du solvant a pu etre determine par l'etude electro-chimique du systeme H{sup +}/H{sub 2}. Les courbes de reduction des melanges ethanolamine-eau, pour des acidites variables, ont permis de suivre les variations de l'etendue du domaine de pH, en fonction de la composition du solvant. L'allure de cette variation a ete expliquee en faisant intervenir la constante dielectrique et la solvatation du proton par l'ethanolamine. Dans une deuxieme partie, les systemes electrochimiques du mercure ont ete etudies par

An approach to automated chromosome analysis; Etudes pour une methode d'automatisation des analyses chromosomiques

Energy Technology Data Exchange (ETDEWEB)

Le Go, Roland

1972-05-03

d'une automatisation des differentes etapes de l'analyse chromosomique. Il est divise en trois tomes dont la matiere est decrite ci-apres. Dans le tome 1 est decrite l'etude d'un selecteur automatique de metaphases. Cet appareil doit realiser au cours du scanning d'une preparation, un processus de decision aboutissant a rejeter toutes images ininteressantes et a conserver les images pertinentes (bonnes metaphases). Ce probleme a ete aborde au moyen d'une etude sur ordinateur par un programme de simulation. La realisation de ce programme a permis d'etablir des algorithmes de selection dont la replique pourra etre realisee dans des circuits logiques electroniques. Dans le tome 2 est traite le probleme de l'automatisation de l'etude morphologique des chromosomes presents dans une metaphase. Cette automatisation necessite le traitement des photographies de metaphases par un appareil convertisseur optique-numerique qui extrait l'information-image et la transcrit sous la forme d'un fichier numerique. Ce fichier comporte pour une image de metaphase, environ 200 000 valeurs de gris, codees selon une echelle a 16, 32 ou 64 ni veaux. Ce fichier numerique est traite par un programme de reconnaissance de forme, qui isole les chromosomes et en recherche les traits caracteristiques: sommets de bras et region centromerique, dans le but d'obtenir des mensurations equivalentes aux longueurs des quatre bras. Le tome 3 etudie un programme d'etablissement automatique du caryotype humain, par appariement optimise des chromosomes. Les donnees proviennent de la numerisation directe des longueurs de bras, effectuee au moyen d'un lecteur digital BENSON. Le programme etablit une liste des appariements, un document graphique imprime representant les paires constituees, dans l'espace: longueur - index centromerique; enfin un document graphique obtenu sur traceur BENSON dans lequel l'auteur donne une representation personnelle des chromosomes, sous forme de croix a bras orthogonaux, dont chaque

Study of free acidity determinations in aqueous solution; Etude des dosages d'acidite libre en solution aqueuse

Energy Technology Data Exchange (ETDEWEB)

Kergreis, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-04-01

The object of this work is the study of the principal methods which can be applied to the measurement of 'free' acidity. In the first part, we define the various types of acidity which can exist in aqueous solution; then, after having studied some hydrolysis reactions, we compare the value of the neutralisation pH of the hydrated cation and that of the precipitation of the hydroxide. In the second part we have started to study the determination of the acidity of an aqueous solution. After having rapidly considered the 'total' acidity determination, we deal with the problem of the 'free' acidity titration. We have considered in particular certain methods: extrapolation of the equivalent point, colorimetric titrations with or without a complexing agent, and finally the use of ion-exchange resins with mixed aqueous and solvent solutions. (author) [French] Le but de ce travail est l'etude des principales methodes de determination de l'acidite 'libre'. Dans une premiere partie nous avons defini les differentes sortes d'acidites pouvant exister en solution aqueuse, puis apres avoir etudie quelques reactions d'hydrolyse, nous avons compare la valeur de pH de neutralisation du cation hydrate et celle de precipitation de l'hydroxyde. Dans la seconde partie nous avons aborde l'etuce des dosages de l'acidite d'une solution aqueuse. Apres avoir envisage assez rapidement la determination de l'acidite 'totale', nous traitons du probleme du titrage de l'acidite 'libre'. Nous avons porte notre attention sur certaines methodes: extrapolation du point equivalent, titrimetrie colorimetrique avec ou sans complexant, et enfin utilisation des resines echangeuses d'ions en milieu aqueux et solvant mixte.

Aspects of the magnetism of ferrous chloride; Aspects du magnetisme du chlorure ferreux

Energy Technology Data Exchange (ETDEWEB)

Carrara, P. [Commissariat a l' Energie Atomique Saclay (France). Centre d' Etudes Nucleaires

1968-03-01

This work is a critical review of the existing work on ferrous chloride and presents, as well, a number of new experimental results. First, a careful analysis of the level structure of ferrous ions in the crystalline field shows that the crystalline anisotropy is of the same order of magnitude as the exchange interactions, a feature which gives rise to some particular effects, such as an upward curvature of the magnetization curve at 0 K in a perpendicular magnetic field. Further, the very low temperature (T > 0.4 K) thermal variation of both the specific heat and magnetic susceptibility evidences a magnetic component in elementary excitations. This result suggests the presence of a large magneto-elastic coupling. Finally, an experimental study of the H-T phase diagram near T{sub N} and of the critical behaviour of the specific heat and parallel susceptibility was performed. (author) [French] Ce travail constitue une analyse critique des resultats obtenus a ce jour sur le chlorure ferreux et comporte en outre quelques resultats experimentaux nouveaux. Tout d'abord, une etude precise de la structure de niveaux de l'ion ferreux dans le champ cristallin montre que l'anisotropie cristalline est comparable aux interactions d'echange, ce qui produit quelques effets originaux tels que, par exemple, l'inflexion de la courbe d'aimantation a 0 K en champ perpendiculaire. D'autre part, la variation thermique a basse temperature (T > 0.4 K) de la chaleur specifique et de la susceptibilite magnetique montre la presence d'une composante magnetique dans les excitations de basse energie. Ce resultat suggere la presence d'un couplage magneto-elastique. Enfin, nous avons realise une etude experimentale de la ligne de transition de phase (diagramme H,T) au voisinage de T{sub N}, et du comportement critique de la chaleur specifique et de la susceptibilite parallele. (auteur)

Measuring irradiation creep

International Nuclear Information System (INIS)

Pelah, I.

1981-03-01

Simulation of fusion-neutron induced damage by beams of light ions is discussed. It is suggested that accelerated creep measurements to determine ''end of life'' of materials may be done by the application of thermal treatment and thermal creep measurements. (author)

Creep damage evaluation of low alloy steel weld joint by small punch creep testing

International Nuclear Information System (INIS)

Nishioka, Tomoya; Sawaragi, Yoshiatsu; Uemura, Hiromi

2013-01-01

The effect of sampling location on SPC (Small Punch Creep) tests were investigated for weld joints to establish evaluation method of Type IV creep behavior. The SPC specimen shape was 10mm diameter and 0.5mm thick round disc prepared from weld joints of 2.25Cr-1Mo low alloy steel. It was found that the center of SPC specimen should be 2mm apart from the weld interface as the recommended sampling location. Creep damage was imposed for large weld joint specimens by axial creep loading at 620degC, 52MPa with the interrupted time fraction of 0.34, 0.45, 0.64 and 0.82.SPC samples were prepared from those damaged specimens following the recommended way described in this paper. Among the various SPC tests conducted, good relationships were found for the test condition of 625degC, 200N. Namely, good relationships were obtained both between minimum deflection rate and creep life fraction, and between rupture time and creep life fraction. Consequently, creep life assessment of Type IV fracture by SPC tests could be well conducted using the sampling location and the test condition recommended in this paper. (author)

Thermal creep of Zircaloy-4 cladding

International Nuclear Information System (INIS)

Murty, K.L.; Clevinger, G.S.; Papazoglou, T.P.

1977-01-01

Data on the hoop creep characteristics of Zircaloy tubing were collected at temperatures between 600 F and 800 F, and at stress levels ranging from 10 ksi to 25 ksi using internal pressurization tests. At low driving forces, exposures as long as 2000 hours were found insufficient to establish steady state creep. The experimental data at temperatures of 650 F to 800 F correlate well with an exponential stress dependence, and the activation energy for creep was found to be in excellent agreement with that for self-diffusion. The range of stresses and temperatures is too small to study the overall effect of these variables on the activation energy for creep. The experimental steady state creep-rates and those predicted from the creep equation used agree within a factor of 1.3. These correlations imply that the mechanism for hoop creep of Zircaloy-4 cladding is characterized by an activation energy of approximately 60 kcal/mole and an activation area of about 20b 3 . In addition, the exponential stress dependence implies that the activation area for creep is stress-independent. These results suggest that the climb of edge dislocations is the rate controlling mechanism for creep of Zircaloy-4. The transient creep regime was also analysed on the premise that primary creep is directly related to the rate of dispersal of dislocation entanglements by climb. (Auth.)

Low Temperature Creep of Hot-Extruded Near-Stoichiometric NiTi Shape Memory Alloy. Part I; Isothermal Creep

Science.gov (United States)

Raj, S. V.; Noebe, R. D.

2013-01-01

This two-part paper is the first published report on the long term, low temperature creep of hot-extruded near-stoichiometric NiTi. Constant load tensile creep tests were conducted on hot-extruded near-stoichiometric NiTi at 300, 373 and 473 K under initial applied stresses varying between 200 and 350 MPa as long as 15 months. These temperatures corresponded to the martensitic, two-phase and austenitic phase regions, respectively. Normal primary creep lasting several months was observed under all conditions indicating dislocation activity. Although steady-state creep was not observed under these conditions, the estimated creep rates varied between 10(exp -10) and 10(exp -9)/s. The creep behavior of the two phases showed significant differences. The martensitic phase exhibited a large strain on loading followed by a primary creep region accumulating a small amount of strain over a period of several months. The loading strain was attributed to the detwinning of the martensitic phase whereas the subsequent strain accumulation was attributed to dislocation glide-controlled creep. An "incubation period" was observed before the occurrence of detwinning. In contrast, the austenitic phase exhibited a relatively smaller loading strain followed by a primary creep region, where the creep strain continued to increase over several months. It is concluded that the creep of the austenitic phase occurs by a dislocation glide-controlled creep mechanism as well as by the nucleation and growth of deformation twins.

Steady-state creep of discontinuous fibre composites

International Nuclear Information System (INIS)

Boecker Pedersen, O.

1975-07-01

A review is given of the relevant literature on creep of composites, including a presentation of existing models for the steady-state creep of composites containing aligned discontinuous fibres where creep of the matrix and fibres is assumed to follow a power law. A model is suggested for predicting the composite creep law from a matrix creep law given in a general form, in the case where the fibres do not creep. The composite creep law predicted by this model is compared with those predicted by previous models, when these are extended to comprise a general matrix creep law. Experimentally, pure copper and composites consisting of aligned discontinuous tungsten fibres in a copper matrix were creep tested at a temperature of 500 deg C. The results indicate a relatively low stress sensitivity of the steady-state creep-rate for pure copper and relatively high stress sensitivity for the composites. This may be explained by the creep models based upon a general matrix creep law. A quantitative prediction shows promising agreement with the present experimental results. (author)

Contribution to the study of the electrodeposition of iron-nickel alloys; Contribution a l'etude du depot electrolytique des alliages fer-nickel

Energy Technology Data Exchange (ETDEWEB)

Valignat, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-12-01

Using a coulometric technique based upon the anodic intentiostatic dissolution, we studied the potentiostatic, deposition of nickel, iron and nickel iron alloys. We have shown that the minimum of the curve I = f (t) (deposition current versus time) is probably due to the transitory blocking of the surface by hydrogen and that the syn-crystallisation of nickel and iron is responsible for the anomalous co-deposition of these two elements. (author) [French] En employant une methode coulometrique par dissolution anodique intensipstatique, nous avons etudie le depot potentiostatique du nickel, du fer et des alliages fer-nickel. Nous avons pu montrer que le minimum de la courbe I = f (t) enregistree au cours du depot est du probablement au blocage momentane de la surface par l'hydrogene et que la syncristallisation du fer et du nickel est responsable de l'anomalie du depot simultane de ces deux elements. (auteur)

High temperature creep-fatigue design

International Nuclear Information System (INIS)

Tavassoli, A. A. F.; Fournier, B.; Sauzay, M.

2010-01-01

Generation IV fission and future fusion reactors envisage development of more efficient high temperature concepts where materials performances are key to their success. This paper examines different types of high temperature creep-fatigue interactions and their implications on design rules for the structural materials retained in both programmes. More precisely, the paper examines current status of design rules for the stainless steel type 316L(N), the conventional Modified 9Cr-1Mo martensitic steel and the low activation Eurofer steel. Results obtained from extensive high temperature creep, fatigue and creep-fatigue tests performed on these materials and their welded joints are presented. These include sequential creep-fatigue and relaxation creep-fatigue tests with hold times in tension, in compression or in both. Effects of larger plastic deformations on fatigue properties are studied through cyclic creep tests or fatigue tests with extended hold time in creep. In most cases, mechanical test results are accompanied with microstructural and fractographic observations. In the case of martensitic steels, the effect of oxidation is examined by performing creep-fatigue tests on identical specimens in vacuum. Results obtained are analyzed and their implications on design allowable and creep-fatigue interaction diagrams are presented. While reasonable confidence is found in predicting creep-fatigue damage through existing code procedures for austenitic stainless steels, effects of cyclic softening and coarsening of microstructure of martensitic steels throughout the fatigue life on materials properties need to be taken into account for more precise damage calculations. In the long-term, development of ferritic/martensitic steels with stable microstructure, such as ODS steels, is proposed. (authors)

High temperature creep-fatigue design

Energy Technology Data Exchange (ETDEWEB)

Tavassoli, A. A. F.; Fournier, B.; Sauzay, M. [CEA Saclay, DEN DMN, F-91191 Gif Sur Yvette (France)

2010-07-01

Generation IV fission and future fusion reactors envisage development of more efficient high temperature concepts where materials performances are key to their success. This paper examines different types of high temperature creep-fatigue interactions and their implications on design rules for the structural materials retained in both programmes. More precisely, the paper examines current status of design rules for the stainless steel type 316L(N), the conventional Modified 9Cr-1Mo martensitic steel and the low activation Eurofer steel. Results obtained from extensive high temperature creep, fatigue and creep-fatigue tests performed on these materials and their welded joints are presented. These include sequential creep-fatigue and relaxation creep-fatigue tests with hold times in tension, in compression or in both. Effects of larger plastic deformations on fatigue properties are studied through cyclic creep tests or fatigue tests with extended hold time in creep. In most cases, mechanical test results are accompanied with microstructural and fractographic observations. In the case of martensitic steels, the effect of oxidation is examined by performing creep-fatigue tests on identical specimens in vacuum. Results obtained are analyzed and their implications on design allowable and creep-fatigue interaction diagrams are presented. While reasonable confidence is found in predicting creep-fatigue damage through existing code procedures for austenitic stainless steels, effects of cyclic softening and coarsening of microstructure of martensitic steels throughout the fatigue life on materials properties need to be taken into account for more precise damage calculations. In the long-term, development of ferritic/martensitic steels with stable microstructure, such as ODS steels, is proposed. (authors)

Thermal ratcheting and creep damage

International Nuclear Information System (INIS)

Clement, G.; Cousseran, P.; Roche, R.L.

1983-08-01

Creep is a cause of deformation; it may also result in rupture in time. Although LMFBR structures are not heavily loaded, they are subjected to large thermal transients. Can structure lifetime be shortened by such transients. Several proposals have been made to assist adesigners with thermal ratcheting in the creep range. Unfortunately these methods are not validated by experiments, and they take only inelastic distorsion into consideration as creep effects. The aim of the work presented here is to correct these deficiencies in providing an experimental basis to ratcheting analysis rules in the creep range, and in considering the effect of cyclic straining (like cyclic thermal stresses) on the time to rupture by creep. Experimental tests have been performed on austenitic stainless steel at 650 0 C for the first item. Results of these tests and results available in the open literature have been used to built a practical rule of ratcheting analysis. This rule giving a conservative value of the creep distortion, is based on the concept of effective primary stress which is an amplification of the primary stress really applied. Concerning the second point (time to rupture), it was necessary to obtain real creep rupture and not instability. According to the proposal of Pr LECKIE, tests were performed on specimen made out of copper, and of aluminium alloys at temperatures between 150 0 C and 300 0 C. With such materials creep rupture is obtained without necking. Experimental tests show that cyclic straining reduces the time to creep rupture under load controlled stress. Caution must be given to the designer: cyclic thermal stress can lead to premature creep rupture

Thermal ratcheting and creep damage

International Nuclear Information System (INIS)

Clement, G.; Cousseran, P.; Roche, R.L.

1983-01-01

Several proposals have been made to assist adesigners with thermal ratcheting in the creep range, the more known has been made by O'DONNELL and POROWSKY. Unfortunately these methods are not validated by experiments, and they take only inelastic distortion into consideration as creep effects. The aim of the work presented here is to correct these deficiencies - in providing an experimental basis to ratcheting analysis rules in the creep range, - in considering the effect of cyclic straining (like cyclic thermal stresses) on the time to rupture by creep. Experimental tests have been performed on austenitic stainless steel at 650 0 C for the first item. Results of these tests and results available in the open literature have been used to built a practical rule of ratcheting analysis. This rule giving a conservative value of the creep distortion, is based on the concept of effective primary stress which is an amplification of the primary stress really applied. Concerning the second point (time to rupture), it was necessary to obtain real creep rupture and not instability. According to the proposal of Pr LECKIE, tests were performed on specimens made out of copper, and of aluminium alloys at temperatures between 150 0 C and 300 0 C. With such materials creep rupture is obtained without necking. Experimental tests show that cyclic straining reduces the time to creep rupture under load controlled stress. Caution must be given to the designer: cyclic thermal stress can lead to premature creep rupture. (orig./GL)

Low stress creep behaviour of zirconium

International Nuclear Information System (INIS)

Prasad, N.

1989-01-01

Creep behaviour of alpha zirconium of grain size varying between 16 and 55 μm has been investigated in the temperature range 813 to 1003K at stresses upto 5.5 MNm -2 using high sensitive spring specimen geometry. Creep experiments on specimens of 50 μm grain size revealed a transition from lattice diffusion controlled viscous creep at temperatures greater than 940K to grain boundary diffusion controlled viscous creep at lower temperatures. Tests conducted on either side of the transition suggest the dominance of Nabarro-Herring and Coble creep processes respectively. Evidence for power-law creep has been observed in practically all the creep tests. Based on the experimental data obtained in the present study and those recently reported by Novotny et al (1985), Langdon creep mechanism maps have bee n constructed at 873 and 973K. With the help of these maps for zirconium and those published for titanium the low stress creep behaviour of zirconium and titanium are compared. (author). 22 refs., 11 figs., 3 tabs

Negative creep in nickel base superalloys

DEFF Research Database (Denmark)

Dahl, Kristian Vinter; Hald, John

2004-01-01

Negative creep describes the time dependent contraction of a material as opposed to the elongation seen for a material experiencing normal creep behavior. Negative creep occurs because of solid state transformations that results in lattice contractions. For most applications negative creep will h...

EFAM ETM-CREEP 03 - the engineering flaw assessment method for creep

International Nuclear Information System (INIS)

Landes, J.D.; Schwalbe, K.H.

2002-01-01

EFAM ETM-CREEP is a document that describes the GKSS procedure for estimating residual lives for structural components that contain crack-like defects and operating in a high temperature regime where they undergo creep deformation. It uses the traditional parameters C t and C * and the ETM parameters δ 5 and δ 5 to characterize the crack extension rates. It relies on input from EFAM ETM 97 for calculating these parameters and from EFAM GTP-CREEP 02 to provide the material property data for crack extension rates and fracture toughness data. (orig.) [de

High temperature creep of vanadium

International Nuclear Information System (INIS)

Juhasz, A.; Kovacs, I.

1978-01-01

The creep behaviour of polycrystalline vanadium of 99.7% purity has been investigated in the temperature range 790-880 0 C in a high temperature microscope. It was found that the creep properties depend strongly on the history of the sample. To take this fact into account some additional properties such as the dependence of the yield stress and the microhardness on the pre-annealing treatment have also been studied. Samples used in creep measurements were selected on the basis of their microhardness. The activation energy of creep depends on the microhardness and on the creep temperature. In samples annealed at 1250 0 C for one hour (HV=160 kgf mm -2 ) the rate of creep is controlled by vacancy diffusion in the temperature range 820-880 0 C with an activation energy of 78+-8 kcal mol -1 . (Auth.)

Creep of parylene-C film

KAUST Repository

Lin, Jeffrey Chun-Hui

2011-06-01

The glass transition temperature of as-deposited parylene-C is first measured to be 50°C with a ramping-temperature-dependent modulus experiment. The creep behavior of parylene-C film in the primary and secondary creep region is then investigated below and above this glass transition temperature using a dynamic mechanical analysis (DMA) machine Q800 from TA instruments at 8 different temperatures: 10, 25, 40, 60, 80, 100, 120 and 150°C. The Burger\\'s model, which is the combined Maxwell model and Kelvin-Voigt model, fits well with our primary and secondary creep data. Accordingly, the results show that there\\'s little or no creep below the glass transition temperature. Above the glass transition temperature, the primary creep and creep rate increases with the temperature, with a retardation time constant around 6 minutes. © 2011 IEEE.

A crystallographic and spectroscopic study of crystal sites in the 'spinel' structure; Etude cristallographique et spectroscopique des sites cristallins dans la structure 'spinelle'

Energy Technology Data Exchange (ETDEWEB)

Drifford, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-15

A crystallographic study on magnesium aluminates led to the determination of crystal site average distortion. A spectroscopic study of transition elements doped spinels gave the position of the doping element in tetrahedral (A) or octahedral (B) sites, and the local distortion of the latter. The comparison of average and local parameters points to differences in the behaviour of doping elements and shows the size of (A) sites are independent of the host crystal composition while the average size of (B) sites varies with the composition. (author) [French] Une etude cristallographique des aluminates de magnesium a permis de determiner la deformation moyenne des sites cristallins. Une etude spectroscopique des aluminates de magnesium dopes avec des elements de transition a permis de localiser les dopants entre les sites tetraedriques (A) et octaedriques (B) et d'etudier la deformation locale de ces sites. La comparaison entre les parametres moyens et locaux a caracterise le comportement du dopant et montre que les dimensions des sites (A) sont independantes de la composition de la matrice, alors que les caracteristiques geometriques moyennes des sites (B) varient continument avec la composition. (auteur)

Contribution to the study of french pitchblendes; Contribution a l'etude des pechblendes francaises

Energy Technology Data Exchange (ETDEWEB)

Geffroy, J. [Commissariat a l' Energie Atomique, Lab. de Mineralogie, Centre de Chatillon (France). Centre d' Etudes Nucleaires; Sarcia, J.A. [Commissariat a l' Energie Atomique, Div. de la Crouzille, Haute Vienne (France). Centre d' Etudes Nucleaires

1955-07-01

The authors first review the characteristics of uraninite-pitchblende, as deduced of present literature. They set apart from typical pitchblende a black oxide aspect, which probably corresponds to neo-formations, and a 'para-pitchblende' aspect, which they relate to deep sur-oxidation of normal pitchblende. They insist on the easy replacement of pitchblende by silica. and give indications as to changes in vein stones (fluorite, quartz, etc...). A detailed study of paragenesis and successions in french uranium districts follows (including discussion of uranium of uranium-bearing coals). The authors attempt to classify french pitchblende veins. They are chiefly epithermal and poor in satellite ores. Three types of deposits are identified: massive - pitchblende type, silica type, fluorite type. These deposits, as those of Portugal, are included in granite, Central-European peri-batholitic types where uranium associates which Ni, Co, Bi and Ag, are in France both rare and poor. Finally, the authors attempt to bring out in the european Hercynian area a particular distribution of paragenetic types. (authors) [French] Les auteurs recapitulent d'abord les caracteres et les occurences de l'uraninite - pechblende, tels qu'ils peuvent etre degages de l'actuelle bibliographie. Ils exposent ensuite les faits qui du point de vue mineralogique seulement ressortent de l'etude mineralogique et chalcographique des pechblendes francaises et de leurs satellites. Ils distinguent de la pechblende-type un facies oxyde noir; correspondant probablement a une neoformation, et un facies parapechblende, qui est rapporte a une sur oxydation hypogene de la pechblende proprement dite. Ils insistent sur le facile remaniement de la pechblende par la slice; et donnent quelques precisions sur les modifications des gangues (fluorine, quartz, etc...). Suit l'etude detaillee des parageneses et des successions dans les districts uraniferes francais: Divisions du

Modeling Creep Processes in Aging Polymers

Science.gov (United States)

Olali, N. V.; Voitovich, L. V.; Zazimko, N. N.; Malezhik, M. P.

2016-03-01

The photoelastic method is generalized to creep in hereditary aging materials. Optical-creep curves and mechanical-creep or optical-relaxation curves are used to interpret fringe patterns. For materials with constant Poisson's ratio, it is sufficient to use mechanical- or optical-creep curves for this purpose

Relationship between the nuclear resonance of cobalt metal and its ferromagnetic properties; Relations entre la resonance nucleaire du cobalt metallique et ses proprietes ferromagnetiques

Energy Technology Data Exchange (ETDEWEB)

Aubrun, J.N. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-05-15

resulte du couplage intense existant entre les noyaux et les electrons porteurs du magnetisme. Ces derniers excitent les noyaux et, dans les parois de Bloch, les soumettent a un champ radio-frequence bien plus intense que le champ RF applique. Les parametres de la resonance se determinent alors a partir du mouvement des parois, et dependent donc des constantes ferromagnetiques. La theorie permet de prevoir quantitativement certains effets particuliers, notamment par action d'un champ magnetique continu ou de la temperature. L'etude expeimentale a porte sur des poudres de cobalt et est en bon accord avec la theorie. Toutefois il faut tenir compte de l'effet de peau et reviser la theorie en consequence. Ceci permet d'expliquer certaines divergences observees, ainsi que l'influence de la taille des grains et celle du champ magnetique sur la forme de raie. Des renseignements originaux ont ete obtenus sur certaines proprietes purement ferromagnetiques du cobalt, en etudiant l'effet d'un champ magnetique et cette methode a pu etre appliquee a d'autres corps ferromagnetiques. En raison du caractere particulier de cette resonance nucleaire, qui se produit en l'absence de champ directeur et possede une importante largeur de raie, des spectrographes de type nouveau ont ete realises qui ont rendu possible des mesures precises de la forme de raie. La faible intensite des signaux obtenus dans certains cas a conduit a la mise au point d'une methode originale d'extraction dont la theorie et les applications pratiques sont donnees ici. L'ensemble de ces experiences fait apparaitre la resonance nucleaire comme un puissant moyen d'etude du ferromagnetique permettant de deceler des phenomenes microscopiques difficilement accessibles par les methodes classiques. (auteur)

Relationship between the nuclear resonance of cobalt metal and its ferromagnetic properties; Relations entre la resonance nucleaire du cobalt metallique et ses proprietes ferromagnetiques

Energy Technology Data Exchange (ETDEWEB)

Aubrun, J N [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-05-15

Theoretical study of nuclear magnetic resonance in ferromagnetic metals shows the near dependence of ferromagnetic properties and unusual feature of this nuclear resonance. This results from a strong interaction between nuclei and magnetic electrons. They excite the nuclei, and, in Bloch walls, submit them to a RF field much stronger than those directly applied. The parameters of the resonance are determined from wall movement and depend consequently of ferromagnetic constants. The theory is enable to provide quantitatively some peculiar effects, specially those of a continuous magnetic field and of temperature. Experimental study was made on cobalt powders, and is in good agreement with theory. However one must take the skin-effect into consideration and accordingly adjust, the theory. This can explain some observed divergences, as well as the influence at particles size and magnetic field over the line shape. Original informations have been obtained about some typical ferromagnetic properties of cobalt, when studying magnetic field effect, and it has been able to apply this method to other ferromagnetic materials. In consideration of the peculiar characteristics of this nuclear resonance, which occurs without external magnetic field and whose line width is large, new models of spectrographs have been realized and have permitted accurate measures of the line shape. The weak intensity of the signals obtained in some cases, has induced the elaboration of an original method of extraction whose theory and practical uses are described here. The whole of this experiment reveals the nuclear resonance as a strong way for the study of ferromagnetism, which is able to detect microscopic phenomenons, not easily accessible by classical methods. (author) [French] L'etude theorique de la resonance magnetique nucleaire dans les metaux ferromagnetiques revele l'etroite liaison entre les proprietes ferromagnetiques et l'aspect inhabituel de cette resonance. Ceci resulte du

Creep of fibrous composite materials

DEFF Research Database (Denmark)

Lilholt, Hans

1985-01-01

Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions...... to the creep strength of composites. The advantage of combined analyses of several data sets is emphasized and illustrated for some experimental data. The analyses show that it is possible to derive creep equations for the (in situ) properties of the fibres. The experiments treated include model systems...... such as Ni + W-fibres, high temperature materials such as Ni + Ni3Al + Cr3C2-fibres, and medium temperature materials such as Al + SiC-fibres. For the first two systems reasonable consistency is found for the models and the experiments, while for the third system too many unquantified parameters exist...

Etude de l'oscillateur de van der pol generalise par la methode du ...

African Journals Online (AJOL)

La méthode du groupe de renormalisation est l'une des méthodes de perturbation singulière utilisée dans la recherche des comportements asymptotiques de solution des équations différentielles ordinaires. Dans ce papier, l'équation de l'oscillateur de VAN der Pol généralisé qui modélise beaucoup de phénomènes ...

Etude de l.inocuite et de l.acceptabilite du sulfate de cellulose (SC ...

African Journals Online (AJOL)

L.objectif principal de l.étude était d.évaluer les effets secondaires locaux et systémiques de l.application vaginale de plusieurs doses de gel de sulfate de cellulose à 6%. L.objectif secondaire était d.en évaluer l.acceptabilité par les participantes. L.autorisation pour mener l.étude a été obtenue du Ministère de la Santé ...

Viscoelastic characterization of carbon fiber-epoxy composites by creep and creep rupture tests

International Nuclear Information System (INIS)

Farina, Luis Claudio

2009-01-01

One of the main requirements for the use of fiber-reinforced polymer matrix composites in structural applications is the evaluation of their behavior during service life. The warranties of the integrity of these structural components demand a study of the time dependent behavior of these materials due to viscoelastic response of the polymeric matrix and of the countless possibilities of design configurations. In the present study, creep and creep rupture test in stress were performed in specimens of unidirectional carbon fiber-reinforced epoxy composites with fibers orientations of 60 degree and 90 degree, at temperatures of 25 and 70 degree C. The aim is the viscoelastic characterization of the material through the creep curves to some levels of constant tension during periods of 1000 h, the attainment of the creep rupture envelope by the creep rupture curves and the determination of the transition of the linear for non-linear behavior through isochronous curves. In addition, comparisons of creep compliance curves with a viscoelastic behavior prediction model based on Schapery equation were also performed. For the test, a modification was verified in the behavior of the material, regarding the resistance, stiffness and deformation, demonstrating that these properties were affected for the time and tension level, especially in work temperature above the ambient. The prediction model was capable to represent the creep behavior, however the determination of the equations terms should be considered, besides the variation of these with the applied tension and the elapsed time of test. (author)

Creep Strength of Discontinuous Fibre Composites

DEFF Research Database (Denmark)

Pedersen, Ole Bøcker

1974-01-01

relation between stress and strain rate. Expressions for the interface stress, the creep velocity profile adjacent to the fibres and the creep strength of the composite are derived. Previous results for the creep strength, sc = aVfs0 ( \\frac[( Î )\\dot] [( Î )\\dot] 0 )1/nr1 + 1/n c=Vf001n1+1n in which[( Î...... )\\dot] is the composite creep rate,V f is the fibre volume fraction,sgr 0,epsi 0 andn are the constants in the matrix creep law. The creep strength coefficient agr is found to be very weakly dependent onV f and practically independent ofn whenn is greater than about 6....

Theory, analysis and applications of the operation of the superconducting transformer supplying a direct current to a non-dissipative superconducting charge circuit; Theorie, analyse et applications du fonctionnement du transformateur supraconducteur alimentant en courant continu un circuit de charge supraconducteur non dissipatif

Energy Technology Data Exchange (ETDEWEB)

Sole, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

The author derives the very simple equations governing the operation of a transformer with superconducting windings supplying direct current to a non-dissipative superconducting charge circuit. An analysis of the various possible modes of operation with direct or slowly varying current raises the problem of the magnetic core. The study. leads to a conclusion which a priori might be surprising: the elimination of the magnetic core and the use of a primary super-conductor. An example of a possible realization of such a transformer is given as an indication, and the present prospects for different applications are considered. (author) [French] L'auteur etablit les equations tres simples de fonctionnement du transformateur a enroulements supraconducteurs alimentant en courant continu un circuit de charge supraconducteur non dissipatif. L'analyse de divers modes de fonctionnement possibles en courant continu ou lentement variable souleve le probleme du noyau magnetique. L'etude aboutit a une conclusion qui a priori aurait pu surprendre: l'elimination du noyau magnetique et l'utilisation d'un primaire supraconducteur. Un exemple de realisation possible d'un tel transformateur est donne a titre indicatif et les perspectives d'applications actuelles sont envisagees. (auteur)

Low-temperature creep of austenitic stainless steels

Science.gov (United States)

Reed, R. P.; Walsh, R. P.

2017-09-01

Plastic deformation under constant load (creep) in austenitic stainless steels has been measured at temperatures ranging from 4 K to room temperature. Low-temperature creep data taken from past and unreported austenitic stainless steel studies are analyzed and reviewed. Creep at cryogenic temperatures of common austenitic steels, such as AISI 304, 310 316, and nitrogen-strengthened steels, such as 304HN and 3116LN, are included. Analyses suggests that logarithmic creep (creep strain dependent on the log of test time) best describe austenitic stainless steel behavior in the secondary creep stage and that the slope of creep strain versus log time is dependent on the applied stress/yield strength ratio. The role of cold work, strain-induced martensitic transformations, and stacking fault energy on low-temperature creep behavior is discussed. The engineering significance of creep on cryogenic structures is discussed in terms of the total creep strain under constant load over their operational lifetime at allowable stress levels.

Fluid Creep and Over-resuscitation.

Science.gov (United States)

Saffle, Jeffrey R

2016-10-01

Fluid creep is the term applied to a burn resuscitation, which requires more fluid than predicted by standard formulas. Fluid creep is common today and is linked to several serious edema-related complications. Increased fluid requirements may accompany the appropriate resuscitation of massive injuries but dangerous fluid creep is also caused by overly permissive fluid infusion and the lack of colloid supplementation. Several strategies for recognizing and treating fluid creep are presented. Copyright © 2016 Elsevier Inc. All rights reserved.

Study of new structures adapted to gas-graphite and gas-heavy water reactors; Etude de structures nouvelles adaptees aux reacteurs graphite-gaz et eau lourde-gaz

Energy Technology Data Exchange (ETDEWEB)

Martin, R; Roche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

'EDF d'une part, les conclusions des etudes et essais effectues hors pile d'autre part, conduisent a un changement considerable de la physionomie des reacteurs de la filiere Graphite-Gaz, Les principales modifications envisagees sont analysees dans la communication. L'adoption d'un element combustible annulaire et d'un soufflage descendant permettront d'accroitre considerablement la puissance specifique et la puissance developpee par canal; il en resultera une reduction sensible du nombre des canaux et un accroissement correlatif de la maille du reseau - L'empilement de graphite devra etre adapte a ces nouvelles conditions - Des raisons de securite conduisent a generaliser l'emploi du beton precontraint pour la construction du caisson; elles pourront amener a integrer a l'interieur de celui-ci les echangeurs et l'appareil de manutention du combustible (dispositif dit: 'en grenier'). Une maquette en vraie grandeur de ce grenier a ete construite a Saclay avec la participation d'EURATOM; les resultats d'exploitation en sont presentes, ainsi que des idees de barres de controle de conception nouvelle. En ce qui concerne la filiere Eau-Lourde-Gaz, les etudes sont poursuivies dans deux voies principales; la premiere, qui conserverait l'usage de tubes de force horizontaux, tient compte de l'experience acquise au cours de la construction du reacteur EL4 dont elle constituerait une extrapolation; la seconde, inspiree des etudes poursuivies au titre de la filiere Graphite-Gaz, ferait appel a un caisson en beton precontraint pour tenir la pression, le moderateur etant sensiblement a la pression du fluide refrigerant et le combustible etant dispose dans des canaux verticaux. Les merites respectifs de ces deux variantes sont analyses dans la communication. (auteurs)

Creep Behaviour of Modified Mar-247 Superalloy

Directory of Open Access Journals (Sweden)

Cieśla M.

2016-06-01

Full Text Available The paper presents the results of analysis of creep behaviour in short term creep tests of cast MAR-247 nickel-based superalloy samples made using various modification techniques and heat treatment. The accelerated creep tests were performed under temperature of 982 °C and the axial stresses of σ = 150 MPa (variant I and 200 MPa (variant II. The creep behaviour was analysed based on: creep durability (creep rupture life, steady-state creep rate and morphological parameters of macro- and microstructure. It was observed that the grain size determines the creep durability in case of test conditions used in variant I, durability of coarse-grained samples was significantly higher.

Study of the fluctuations of the partial and total radiative widths by neutron capture resonance method; Etude des fluctuations des largeurs radiatives partielles et totales par la capture des neutrons de resonance

Energy Technology Data Exchange (ETDEWEB)

Huynh, V.D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

Radiative capture experiments by neutron time-of-flight methods have been made for following studies: distribution of partial radiative widths, effects of correlation between different radiative transitions, fluctuations of total radiative widths {gamma}{sub {gamma}} from resonance to resonance, variation of {gamma}{sub {gamma}} with number of mass and the search for the existence of potential capture. Also, some other experiments with the use of neutron capture gamma-rays spectra have been investigated. (author) [French] Par la capture des neutrons de resonance dont les energies sont selectionnees a l'aide de la technique du temps de vol, differents types d'experiences ont ete realisees concernant les etudes des distributions des largeurs radiatives partielles, des effets de correlation entre differentes voies de desexcitation, de la fluctuation des largeurs radiatives totales {gamma}{sub {gamma}} de resonance a resonance, de la variation de la quantite {gamma}{sub {gamma}} en fonction du nombre de masse et de la mise en evidence de l'existence du processus de capture potentielle. Quelques autres applications de l'emploi du spectre de rayons gamma ont egalement ete presentees. (auteur)

Finite element simulation for creep crack growth

International Nuclear Information System (INIS)

Miyazaki, Noriyuki; Sasaki, Toru; Nakagaki, Michihiko; Brust, F.W.

1992-01-01

A finite element method was applied to a generation phase simulation of creep crack growth. Experimental data on creep crack growth in a 1Cr-1Mo-1/4V steel compact tension specimen were numerically simulated using a node-release technique and the variations of various fracture mechanics parameters such as CTOA, J, C * and T * during creep crack growth were calculated. The path-dependencies of the integral parameters J, C * and T * were also obtained to examine whether or not they could characterize the stress field near the tip of a crack propagating under creep condition. The following conclusions were obtained from the present analysis. (1) The J integral shows strong path-dependency during creep crack growth, so that it is does not characterize creep crack growth. (2) The C * integral shows path-dependency to some extent during creep crack growth even in the case of Norton type steady state creep law. Strictly speaking, we cannot use it as a fracture mechanics parameter characterizing creep crack growth. It is, however, useful from the practical viewpoint because it correlates well the rate of creep crack growth. (3) The T * integral shows good path-independency during creep crack growth. Therefore, it is a candidate for a fracture mechanics parameter characterizing creep crack growth. (author)

Experiments on neutron-attenuation by ordinary concrete; Etude experimentale de l'attenuation des neutrons dans le beton ordinaire

Energy Technology Data Exchange (ETDEWEB)

Beauge, R; Millot, J P; Rastoin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

The penetration of fission-neutrons in water and glass mixtures has been investigated in the NAIADE facility. The slopes of the thermal and fast fluxes (the latter measured with a dosimeter) remain similar when the volume proportion of water is greater than 15 per cent. For smaller water-contents the measurements show the evidence of streaming, presumably due to slowing-down neutrons of energy smaller than 300 keV. Since a volume proportion of about 15 per cent of water in glass corresponds to the composition of ordinary concrete, the present work enables to predict the effects of a desiccation of concrete. Moreover, it is seen that there is no interest in increasing the proportion of water in ordinary concrete beyond the usual values (15-20 per cent). (author) [French] La propagation des neutrons de fission a ete etudiee dans les melanges verre-eau au moyen du dispositif NAIADE. La pente du flux thermique et la pente du flux rapide (obtenue au moyen d'un dosimetre) restent voisines lorsque la proportion d'eau dans le melange depasse 15 pour cent en volume. Pour des proportions d'eau inferieures les mesures mettent en evidence un 'streaming' de neutrons en ralentissement d'energie probablement inferieure a 300 keV. La composition des melanges verre-eau aux environs de 15 pour cent d'eau en volume correspondant au beton ordinaire, la presente etude permet de prevoir les effets d'une dessication du beton, et montre, en outre, qu'il n'y a pas interet a essayer d'augmenter la proportion d'eau dans le beton ordinaire au dela des valeurs usuelles (15 a 20 pour cent). (auteur)

A study on creep properties of laminated rubber bearings. Pt. 1. Creep properties and numerical simulations of thick rubber bearings

International Nuclear Information System (INIS)

Matsuda, Akihiro; Yabana, Shuichi

2000-01-01

In this report, to evaluate creep properties and effects of creep deformation on mechanical properties of thick rubber bearings for three-dimensional isolation system, we show results of compression creep test for rubber bearings of various rubber materials and shapes and development of numerical simulation method. Creep properties of thick rubber bearings were obtained from compression creep tests. The creep strain shows steady creep that have logarithmic relationships between strain and time and accelerated creep that have linear relationships. We make numerical model of a rubber material with nonlinear viscoelastic constitutional equations. Mechanical properties after creep loading test are simulated with enough accuracy. (author)

A phenomenological theory of transient creep

International Nuclear Information System (INIS)

Ajaja, O.; Ardell, A.J.

1979-01-01

A new creep theory is proposed which takes into account the strain generated during the annihilation of dislocations. This contribution is found to be very significant when recovery is appreciable, and is mainly responsible for the decreasing creep rate associated with the normal primary creep of class II materials. The theory provides excellent semiquantitative rationalization for the types of creep curves presented in the preceding paper. In particular, the theory predicts a change in the shape of the primary creep curve from normal to inverted as recovery becomes less important, i.e. as the applied stress and/or temperature decrease(s). It also predicts a minimum creep rate under certain circumstances, hence pseudo-tertiary behaviour. These different types of creep curves are predicted even though the net dislocation density decreases monotonically with time in all cases. Qualitative rationalization is presented for the inverted transient which always follows a stress drop in class II materials, as well as for the inverted primary and sigmoidal creep behaviour of class I solid solutions. (author)

Creep and creep rupture properties of unalloyed vanadium and solid-solution-strengthened vanadium-base alloys

International Nuclear Information System (INIS)

Kainuma, T.; Iwao, N.; Suzuki, T.; Watanabe, R.

1982-01-01

The creep and creep rupture properties of vanadium and vanadium-base alloys were studied at 700 and 1000 0 C. The alloys were vanadium-base binary alloys containing about 5 - 21 at.% Al, Ti, Nb, Ta, Cr, Mo or Fe, three V-20wt.%Nb-base ternary alloys containing 5 or 10 wt.% Al, Cr or Mo, V-10wt.%Ta-10wt.%Al and V-25wt.%Cr-0.8wt.%Zr. The creep rupture stress of the binary alloys, except the V-Al and V-Ti alloys, increased linearly with increasing concentration of the alloying elements. The V-Nb alloy had the best properties with respect to the rupture stress and creep rate at 700 0 C and the rupture stress at 1000 0 C, but the V-Mo alloy appeared likely to have better creep properties at longer times and higher temperatures. Of the five ternary alloys, V-20wt.%Nb-5wt.%Cr and V-20wt.%Nb-10wt.%Mo showed the best creep properties. The creep properties of these two alloys were compared with those of other vanadium alloys and of type 316 stainless steel. (Auth.)

The Mosquitoes of the Subgenus Culex in Southwestern Asia and Egypt (Diptera: Culicidae) (Contributions of the American Entomological Institute. Volume 24, Number 1, 1988)

Science.gov (United States)

1988-01-01

Pathol. Exot. 53: 531-542. 1968. Contribution a I’etude des moustiques du Maroc (Diptera, Culicidae) six especes nouvelles pour le pays. Cah. ORSTOM...quelques moustiques du Maroc. Arch. inst. Pasteur Maroc 2: 361-365. 1957. Sur Culex torrentium Martini. Ann. Parasitol. Hum. Comp. 32: 438-442...De Grandpre, A.D. and D. D’E. De Charmoy 1900(1901). Les moustiques : anatomie et biologie. Contribution a I’etude des Culicides et principalement

Creep buckling analysis of shells

International Nuclear Information System (INIS)

Stone, C.M.; Nickell, R.E.

1977-01-01

The current study was conducted in an effort to determine the degree of conservatism or lack of conservatism in current ASME design rules concerning time-dependent (creep) buckling. In the course of this investigation, certain observations were made concerning the numerical solution of creep buckling problems. It was demonstrated that a nonlinear finite element code could be used to solve the time-dependent buckling problem. A direct method of solution was presented which proved to be computationally efficient and provided answers which agreed very well with available analytical solutions. It was observed that the calculated buckling times could vary widely for small errors in computed displacements. The presence of high creep strain rates contributed to the prediction of early buckling times when calculated during the primary creep stage. The predicted time estimates were found to increase with time until the secondary stage was reached and the estimates approached the critical times predicted without primary creep. It can be concluded, therefore, that for most nuclear piping components, whose primary creep stage is small compared to the secondary stage, the effect of primary creep is negligible and can be omitted from the calculations. In an evaluation of the past and current ASME design rules for time-dependent, load controlled buckling, it was concluded that current use of design load safety factors is not equivalent to a safety factor of ten on service life for low creep exponents

Lattice continuum and diffusional creep.

Science.gov (United States)

Mesarovic, Sinisa Dj

2016-04-01

Diffusional creep is characterized by growth/disappearance of lattice planes at the crystal boundaries that serve as sources/sinks of vacancies, and by diffusion of vacancies. The lattice continuum theory developed here represents a natural and intuitive framework for the analysis of diffusion in crystals and lattice growth/loss at the boundaries. The formulation includes the definition of the Lagrangian reference configuration for the newly created lattice, the transport theorem and the definition of the creep rate tensor for a polycrystal as a piecewise uniform, discontinuous field. The values associated with each crystalline grain are related to the normal diffusional flux at grain boundaries. The governing equations for Nabarro-Herring creep are derived with coupled diffusion and elasticity with compositional eigenstrain. Both, bulk diffusional dissipation and boundary dissipation accompanying vacancy nucleation and absorption, are considered, but the latter is found to be negligible. For periodic arrangements of grains, diffusion formally decouples from elasticity but at the cost of a complicated boundary condition. The equilibrium of deviatorically stressed polycrystals is impossible without inclusion of interface energies. The secondary creep rate estimates correspond to the standard Nabarro-Herring model, and the volumetric creep is small. The initial (primary) creep rate is estimated to be much larger than the secondary creep rate.

Etude séro-épidémiologique de la leishmaniose canine au centre du Maroc

Science.gov (United States)

Fellah, Hajiba; Doughmi, Oursula; Maniar, Saâd; Lalami, Abdelhakim El Ouali

2014-01-01

Dans le monde, la leishmaniose viscérale humaine est connue pour avoir comme principale source d'infection les Canidés domestiques et sauvages. Au centre du Maroc, les données épidémiologiques, cliniques et parasitologiques sur la leishmaniose canine, sont quasiment inexistantes. Ce travail traite une étude prospective au cours de laquelle 61 sérums canins ont été analysés par un test rapide et par l'immunofluorescence indirecte. La sensibilité du test rapide par rapport à celle de l'immunofluorescence indirecte (IFI) est de 33,33%. La fréquence de la maladie chez les chiens s’élève à 9,83% (Test Rapide) et 24,59% (IFI). 73,33% des cas canins positifs à la sérologie sont asymptomatiques. Ce sont les jeunes chiens de moins de 5 ans qui sont les plus fréquemment atteints avec une sensibilité de la race Berger Allmand à l'infection. Cette étude a permis de mettre en évidence la présence de chiens leishmaniens (15 chiens séropositifs parmi 61) et de prouver l'existence du réservoir canin. Une stratégie de prévention active doit être mise en place. PMID:25852791

Collect Available Creep-Fatigue Data and Study Existing Creep-Fatigue Evaluation Procedures for Grade 91 and Hastelloy XR

International Nuclear Information System (INIS)

Asayama, Tai; Tachibana, Yukio

2007-01-01

This report describes the results of investigation on Task 5 of DOE/ASME Materials Project based on a contract between ASME Standards Technology, LLC (ASME ST-LLC) and Japan Atomic Energy Agency (JAEA). Task 5 is to collect available creep-fatigue data and study existing creep-fatigue evaluation procedures for Grade 91 steel and Hastelloy XR. Part I of this report is devoted to Grade 91 steel. Existing creep-fatigue data were collected (Appendix A) and analyzed from the viewpoints of establishing a creep-fatigue procedure for VHTR design. A fair amount of creep-fatigue data has been obtained and creep-fatigue phenomena have been clarified to develop design standards mainly for fast breeder reactors. Following this, existing creep-fatigue procedures were studied and it was clarified that the creep-fatigue evaluation procedure of the ASME-NH has a lot of conservatisms and they were analyzed in detail from the viewpoints of the evaluation of creep damage of material. Based on the above studies, suggestions to improve the ASME-NH procedure along with necessary research and development items were presented. Part II of this report is devoted to Hastelloy XR. Existing creep-fatigue data used for development of the high temperature structural design guideline for High Temperature Gas-cooled Reactor (HTGR) were collected. Creep-fatigue evaluation procedure in the design guideline and its application to design of the intermediate heat exchanger (IHX) for High Temperature Engineering Test Reactor (HTTR) was described. Finally, some necessary research and development items in relation to creep-fatigue evaluation for Gen IV and VHTR reactors were presented.

Mechanisms of transient radiation-induced creep

International Nuclear Information System (INIS)

Pyatiletov, Yu.S.

1981-01-01

Radiation-induced creep at the transient stage is investigated for metals. The situation, when several possible creep mechanisms operate simultaneously is studied. Among them revealed are those which give the main contribution and determine thereby the creep behaviour. The time dependence of creep rate and its relation to the smelling rate is obtained. The results satisfactorily agree with the available experimental data [ru

Synthesis of phenobarbital {sup 14}C - 5 (1964); Synthese du phenobarbital {sup 14}C - 5 (1964)

Energy Technology Data Exchange (ETDEWEB)

Benakis, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Phenobarbital (Luminal), well known as a hypnotic agent, plays also an important role in the medical treatment of epilepsy. With the object of studying the metabolism of this medicament in the living system, the synthesis of phenobarbital marked in position 2 of the pyrimidinic ring has been effected. It has been necessary, in order to carry out to research into the metabolism of this product, to have a phenobarbital marked in position 5 of the pyrimidinic ring. This synthesis, making it possible to introduce C-14 into position 5 of the pyrimidinic ring, consists of seven stages starting from C-14 carboxyl benzoic acid having a specific activity of 25 mc/mM. The melting point of the final product is 172 - 173 deg. C and its specific activity is 11.15 mc/mM. The overall radioactive yield of the pure product, with respect to the original benzoic acid (10 mM) is of the order of 3 per cent. The purity of the product has been controlled by paper chromatography; it is of the order of 99 per cent. (author) [French] Le phenobarbital (Luminal) bien connu comme agent hypnotique, joue egalement un role important dans la medication anti-epileptique. Pour l'etude du metabolisme de ce medicament dans l'organisme vivant, nous avons synthetise le phenobarbital marque en position 2 du cycle pyrimidinique. Afin de poursuivre la recherche du metabolisme de ce produit, il a ete necessaire de disposer du phenobarbital marque en position 5 du cycle. pyrimidinique. Cette synthese, permettant l'introduction du {sup 14}C en position 5 du cycle pyrimidinique, comporte sept etapes, au depart de l'acide benzoique carboxyle {sup 14}C, d'une activite specifique de 25 mc/mM. Point de fusion du produit final: 172 - 173 deg. C Activite specifique: 11,15 mC/mM. Rendement total radioactif du produit pur, par rapport a l'acide benzoique de depart sur 10 mM, de l'ordre de 3 pour cent. La purete du produit a ete controlee par chromatographie sur papier; elle est de l'ordre de 99 pour cent. (auteur)

Processing Th C{sub 2} - UC{sub 2} fuel extracted from high temperature reactors HTGCR; Etude du traitement des combustibles Th C{sub 2} - UC{sub 2} issus de reacteurs a haute temperature

Energy Technology Data Exchange (ETDEWEB)

Derrien, C; Lessart, P; Pianezza, E; Verry, C; Villain, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

The object of this investigation is solubilisation head-end (from crushing and grinding phase to non included first purification phase) of pulverulent ({sup 233}U/{sup 232}Th)C{sub 2} (200 - 500 microns diameter) contained in a graphite matrix extracted from a 4.10{sup 13} n.cm{sup -2}.s{sup -1} thermalized neutrons average flux with an irradiation of 80000 MWjT{sup -1} HTGCR reactor. After having succinctly described different bibliographic processes we have chosen the burn - leach of reactor fuel and graphite matrix containing it. The technology of burner is original in nuclear field and still more by utilizing ultra-sounds to intensify burning reaction and to minimize the weight of unburnables. The mixture of ThO{sub 2}, U{sub 3}O{sub 8}, and fission products oxides is solubilized by boiling HNO{sub 3} 13 M + HF 0.05 M. This process is profit-learning in a thorium recuperation and reprocessing point of view. In the contrary-case it would be interesting to consider a dry-process which would permit to separate solid ThF{sub 4} from gaseous UF{sub 6}. (authors) [French] Cette etude a pour objet le traitement initial de mise en solution ou 'head-end' (allant de la phase broyag-concassage a la phase de premiere purification exclue) d'un combustible ({sup 233}U/{sup 232}Th)C{sub 2} pulverulent (de 200 a 500 {mu} de diametre) contenu dans une matrice de graphite issu d'un reacteur HTGCR surgenerateur a neutrons thermiques de flux moyen 4. l0{sup 13} n.cm{sup -2}.s{sup -1} et taux d'irradiation 80000 MWjT{sup -1}. Apres exposition succincte des differents procedes bibliographiques decrits, nous avons finalement choisi le traitement par combustion-attaque ('Burn-Leach') du combustible et de la matrice etanche graphite qui le contient. La technologie du bruleur est originale dans le domaine nucleaire d'autant qu'elle utilise les ultra-sons pour ameliorer le rendement de la reaction de combustion et reduire au minimum le poids des imbrules. Le melange ThO{sub 2}, U{sub 3}O

Advanced nondestructive evaluation for creep damage

International Nuclear Information System (INIS)

Anon.

1987-01-01

As a result of operation at elevated temperatures, power plant components experience creep. Changes in metallurgical structure and microscopic cracking occur after periods of operation and lead to component failure. In order to detect the presence of creep and avoid creep-related failures, EPRI has just initiated a five year program entitled Advanced NDE for Creep Damage (RP 1856-7). The objective of this program is to develop NDE methods for detection and characterization of microscopic creep damage. Several NDE methods will be initially evaluated to determine their potential for detecting and characterizing such damage. These NDE methods include ultrasonics, eddy current, Barkhausen, positron annihilation, and thermal-wave imaging. A prototype system will be developed and tested for commercial applications in a follow-on project, utilizing characteristics of the best NDE method for creep detection. A brief description of the project and results of a theoretical investigation, to determine feasibility of ultrasonic NDE method, for detection of creep damage are presented

Contribution to the study of the diffusion of fission products in uranium; Contribution a l'etude de la diffusion des produits de fission dans l'uranium

Energy Technology Data Exchange (ETDEWEB)

Tournier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-10-15

In this work we have developed a simple method for determining the diffusion constants and the solid-state solubilities of a metal which is volatile and only slightly soluble in second metal. This method has been applied to the behaviour of certain fission products in {gamma} uranium: strontium, barium, lanthanum, samarium and cerium. This work has made it possible to show the effect of the atomic radius of the solute on the diffusion constants. (author) [French] Dans ce travail nous avons mis au point une methode simple permettant de determiner les constantes de diffusion ainsi que les solubilites a l'etat solide d'un metal volatil et peu soluble dans un autre. Cette methode a ete appliquee au comportement de certains produits de fission dans l'uranium {gamma}: strontium, baryum, lanthane, samarium et cerium. Cette etude a permis de mettre en evidence le role du rayon atomique du solute sur les constantes de diffusion. (auteur)

Creep rupture strength and creep behavior of low-activation martensitic OPTIFER alloys. Final report

International Nuclear Information System (INIS)

Schirra, M.; Falkenstein, A.; Heger, S.; Lapena, J.

2001-07-01

The creep rupture strength and creep experiments performed on low-activation OPTIFER alloys in the temperature range of 450-700 C shall be summarized in the present report. Together with the reference alloy of the type 9.5Cr1W-Mn-V-Ta, W-free variants (+Ge) with a more favorable activation and decay behavior shall be studied. Their smaller strength values are compensated by far better toughness characteristics. Of each development line, several batches of slightly varying chemical composition have been investigated over service lives of up to 40,000 h. Apart from the impact of a reference thermal treatment at a hardening temperature of 1075 C and an annealing temperature of 750 C, the influence of reduced hardening temperatures (up to 950 C) has been determined. A long-term use at increased temperatures (max. 550 C-20,000 h) produces an aging effect with strength being decreased in the annealed state. To determine this aging effect quantitatively, creep rupture experiments have been performed using specimens that were subjected to variable types of T/t annealing (550 -650 C, 330-5000 h). Based on all test results, minimum values for the 1% time-strain limit and creep rupture in the T range of 400-600 C can be given as design curves for 20,000 h. The minimum creep rates obtained from the creep curves recorded as a function of the experimental stress yield the stress exponent n (n=Norton) for the individual test temperatures. Creep behavior as a function of the test temperature yields the values for the effective activation energy of creeping Q K . The influence of a preceding temperature transient up to 800 C (≤Ac 1b ) or 840 C (>Ac 1b ) with subsequent creep rupture tests at 500 C and 550 C, respectively, shall be described. The results obtained for the OPTIFER alloys shall be compared with the results achieved for the Japanese 2% W-containing F82H-mod. alloy. (orig.) [de

Creep and creep-recovery of a thermoplastic resin and composite

Science.gov (United States)

Hiel, Clem

1988-01-01

The database on advanced thermoplastic composites, which is currently available to industry, contains little data on the creep and viscoelastic behavior. This behavior is nevertheless considered important, particularly for extended-service reliability in structural applications. The creep deformation of a specific thermoplastic resin and composite is reviewed. The problem to relate the data obtained on the resin to the data obtained on the composite is discussed.

Transitions in creep mechanisms and creep anisotropy in Zr-1Nb-1Sn-0.2Fe sheet

International Nuclear Information System (INIS)

Murty, K.L.; Ravi, J.; Wiratmo

1995-01-01

The creep characteristics of a Zr-1Nb-1Sn-0.2Fe alloy sheet were investigated at temperatures from 773 to 923K and at stresses ranging from 9 to 150MPa along both the rolling and transverse directions. Transitions in creep mechansims are noted, with diffusional viscous creep at low stresses, viscous-glide-controlled microcreep in the intermediate stress regime and the climb of edge dislocations at high stresses. The creep anisotropy decreases with a decrease in the stress exponent and the creep rates differ by only 30% in the viscous creep regime, while an order-of-magnitude difference is noted at high stresses. The solute-strengthening effect of Nb addition is evident in the stress regime where appropriate data are available. These transitions in creep mechansims clearly reveal the dangers in blind extrapolation of short-term high stress data to low stresses and long times relevant to in-reactor conditions. The creep behavior of these materials is similar to that noted in Class I alloys, while the transitions in deformation mechanisms in Zircaloy-4 resemble those found in pure metals or Class II alloys with no viscous glide mechanism. ((orig.))

Le changement comme tradition dans la recherche et la formation a la recherche en biotechnologie et en peripherie Etude de cas en sciences de la sante, sciences naturelles et genie

Science.gov (United States)

Bourque, Claude Julie

Le champ de la recherche scientifique et de la formation a la recherche est traverse depuis quelques dizaines d'annees par plusieurs courants et discours associes au changement, mais peu de travaux empiriques permettent de comprendre ce qui change concretement. C'est la contribution originale de cette these au champ de l'education, plus specifiquement a l'etude sociologique de l'enseignement superieur ou sont concentrees les activites liees a la triade thematique du programme doctoral dans lequel elle a ete produite : recherche, formation et pratique. L'enquete-terrain a ete realisee en 2009 et 2010 aupres de 808 repondants affilies a 60 etablissements au Quebec et a produit un vaste materiau de nature mixte (donnees quantitatives et qualitatives). Un portrait de la nebuleuse biotechnologique qui touche les secteurs des sciences de la sante, des sciences naturelles et du genie a ete realise. Ce domaine concerne des dizaines de disciplines et se revele de nature transdisciplinaire, mais les pratiques n'y sont pas davantage marquees par le changement que celles d'autres domaines connexes. Les dynamiques sociales ont fait l'objet d'analyses comparatives dans quatre contextes: le choix des programmes, des objets et des methodes, le financement, la diffusion et la planification de la carriere. Les resultats indiquent que les echanges entre les agents traditionnellement situes au coeur des activites de recherche dominent ces dynamiques dans tous les contextes etudies. L'etude des representations au fondement des pratiques a revele l'existence de trois ecoles de pensee qui coexistent dans le champ scientifique: academique, pragmatique et economiste. Ces ecoles permettent de categoriser les agents en fonction des zones de fractures qui marquent leurs oppositions tout en identifiant ce qu'ils ont en commun. Les representations et les pratiques liees a la formation temoignent d'un habitus plutot homogene, alors que les contradictions semblent plus souvent ancrees dans des

Neutron irradiation creep in stainless steel alloys

Energy Technology Data Exchange (ETDEWEB)

Schuele, Wolfgang (Commission of the European Union, Institute for Advanced Materials, I-21020 Ispra (Vatican City State, Holy See) (Italy)); Hausen, Hermann (Commission of the European Union, Institute for Advanced Materials, I-21020 Ispra (Vatican City State, Holy See) (Italy))

1994-09-01

Irradiation creep elongations were measured in the HFR at Petten on AMCR steels, on 316 CE-reference steels, and on US-316 and US-PCA steels varying the irradiation temperature between 300 C and 500 C and the stress between 25 and 300 MPa. At the beginning of an irradiation a type of primary'' creep stage is observed for doses up to 3-5 dpa after which dose the secondary'' creep stage begins. The primary'' creep strain decreases in cold-worked steel materials with decreasing stress and decreasing irradiation temperature achieving also negative creep strains depending also on the pre-treatment of the materials. These primary'' creep strains are mainly attributed to volume changes due to the formation of radiation-induced phases, e.g. to the formation of [alpha]-ferrite below about 400 C and of carbides below about 700 C, and not to irradiation creep. The secondary'' creep stage is found for doses larger than 3 to 5 dpa and is attributed mainly to irradiation creep. The irradiation creep rate is almost independent of the irradiation temperature (Q[sub irr]=0.132 eV) and linearly dependent on the stress. The total creep elongations normalized to about 8 dpa are equal for almost every type of steel irradiated in the HFR at Petten or in ORR or in EBR II. The negative creep elongations are more pronounced in PCA- and in AMCR-steels and for this reason the total creep elongation is slightly smaller at 8 dpa for these two steels than for the other steels. ((orig.))

Multi-axial Creep and the LICON Methodology for Accelerated Creep Testing

International Nuclear Information System (INIS)

Bowyer, William H.

2006-05-01

The copper-Iron canister for disposal of nuclear waste in the Swedish Programme has a design life exceeding 100,000 years. Whilst the operating temperature (100 deg C max.) and operating stress (50 MPa max.) are modest, the very long design life does require that the likely creep performance of the canister should be investigated. Many studies have been carried out by SKB but these have all involved very short duration tests at relatively high stresses. The process of predicting canister creep life by extrapolation of data from such tests has been challenged for two main reasons. The first is that the deformation and failure mechanisms in the tests employed are different from the mechanism expected under service conditions and the second is that the extrapolation is extreme. It has been recognised that there is usually scope for some increase in test temperatures and stresses which will accelerate the development of creep damage without compromising the use of extrapolation for life prediction. Cane demonstrated that in steels designed for high temperature and pressure applications, conditions of multi-axial stressing could lead to increases or decreases in the rate of damage accumulation without changing the damage mechanism. This provided a third method for accelerating creep testing which has been implemented as the LICON method. This report aims to explain the background to the LICON method and its application to the case of the copper canister. It seems likely that the method could be used to improve our knowledge of the creep resistance of the copper canister. Multiplication factors that may be achieved by the technique could be increased by attention to specimen design but an extensive and targeted programme of data collection on creep of copper would still be needed to implement the method to best advantage

Multi-axial Creep and the LICON Methodology for Accelerated Creep Testing

Energy Technology Data Exchange (ETDEWEB)

Bowyer, William H. [Meadow End Farm, Farnham (United Kingdom)

2006-05-15

The copper-Iron canister for disposal of nuclear waste in the Swedish Programme has a design life exceeding 100,000 years. Whilst the operating temperature (100 deg C max.) and operating stress (50 MPa max.) are modest, the very long design life does require that the likely creep performance of the canister should be investigated. Many studies have been carried out by SKB but these have all involved very short duration tests at relatively high stresses. The process of predicting canister creep life by extrapolation of data from such tests has been challenged for two main reasons. The first is that the deformation and failure mechanisms in the tests employed are different from the mechanism expected under service conditions and the second is that the extrapolation is extreme. It has been recognised that there is usually scope for some increase in test temperatures and stresses which will accelerate the development of creep damage without compromising the use of extrapolation for life prediction. Cane demonstrated that in steels designed for high temperature and pressure applications, conditions of multi-axial stressing could lead to increases or decreases in the rate of damage accumulation without changing the damage mechanism. This provided a third method for accelerating creep testing which has been implemented as the LICON method. This report aims to explain the background to the LICON method and its application to the case of the copper canister. It seems likely that the method could be used to improve our knowledge of the creep resistance of the copper canister. Multiplication factors that may be achieved by the technique could be increased by attention to specimen design but an extensive and targeted programme of data collection on creep of copper would still be needed to implement the method to best advantage.

Correlation of creep rate with microstructural changes during high temperature creep

Science.gov (United States)

Young, C. T.; Sommers, B. R.; Lytton, J. L.

1977-01-01

Creep tests were conducted on Haynes 188 cobalt-base alloy and alpha titanium. The tests on Haynes 188 were conducted at 1600 F and 1800 F for stresses from 3 to 20 ksi, and the as-received, mill-annealed results were compared to specimens given 5%, 10%, and 15% room temperature prestrains and then annealed one hour at 1800 F. The tests on alpha titanium were performed at 7,250 and 10,000 psi at 500 C. One creep test was done at 527 C and 10,000 psi to provide information on kinetics. Results for annealed titanium were compared to specimens given 10% and 20% room temperature prestrains followed by 100 hours recovery at 550 C. Electron microscopy was used to relate dislocation and precipitate structure to the creep behavior of the two materials. The results on Haynes 188 alloy reveal that the time to reach 0.5% creep strain at 1600 F increases with increasing prestrain for exposure times less than 1,000 hours, the increase at 15% prestrain being more than a factor of ten.

Etude de pratiques d'enseignement relatives a la modelisation en sciences et technologies avec des enseignants du secondaire

Science.gov (United States)

Aurousseau, Emmanuelle

Les modeles sont des outils amplement utilises en sciences et technologies (S&T) afin de representer et d’expliquer un phenomene difficilement accessible, voire abstrait. La demarche de modelisation est presentee de maniere explicite dans le programme de formation de l’ecole quebecoise (PFEQ), notamment au 2eme cycle du secondaire (Quebec. Ministere de l'Education du Loisir et du Sport, 2007a). Elle fait ainsi partie des sept demarches auxquelles eleves et enseignants sont censes recourir. Cependant, de nombreuses recherches mettent en avant la difficulte des enseignants a structurer leurs pratiques d’enseignement autour des modeles et de la demarche de modelisation qui sont pourtant reconnus comme indispensables. En effet, les modeles favorisent la conciliation des champs concrets et abstraits entre lesquels le scientifique, meme en herbe, effectue des allers-retours afin de concilier le champ experimental de reference qu’il manipule et observe au champ theorique relie qu’il construit. L’objectif de cette recherche est donc de comprendre comment les modeles et la demarche de modelisation contribuent a faciliter l’articulation du concret et de l’abstrait dans l’enseignement des sciences et des technologies (S&T) au 2eme cycle du secondaire. Pour repondre a cette question, nous avons travaille avec les enseignants dans une perspective collaborative lors de groupes focalises et d’observation en classe. Ces dispositifs ont permis d’examiner les pratiques d’enseignement que quatre enseignants mettent en oeuvre en utilisant des modeles et des demarches de modelisation. L’analyse des pratiques d’enseignement et des ajustements que les enseignants envisagent dans leur pratique nous permet de degager des connaissances a la fois pour la recherche et pour la pratique des enseignants, au regard de l’utilisation des modeles et de la demarche de modelisation en S&T au secondaire.

Creep Aging Behavior Characterization of 2219 Aluminum Alloy

Directory of Open Access Journals (Sweden)

Lingfeng Liu

2016-06-01

Full Text Available In order to characterize the creep behaviors of 2219 aluminum alloy at different temperatures and stress levels, a RWS-50 Electronic Creep Testing Machine (Zhuhai SUST Electrical Equipment Company, Zhuhai, China was used for creep experiment at temperatures of 353~458 k and experimental stresses of 130~170 MPa. It was discovered that this alloy displayed classical creep curve characteristics in its creep behaviors within the experimental parameters, and its creep value increased with temperature and stress. Based on the creep equation of hyperbolic sine function, regression analysis was conducted of experimental data to calculate stress exponent, creep activation energy, and other related variables, and a 2219 aluminum alloy creep constitutive equation was established. Results of further analysis of the creep mechanism of the alloy at different temperatures indicated that the creep mechanism of 2219 aluminum alloy differed at different temperatures; and creek characteristics were presented in three stages at different temperatures, i.e., the grain boundary sliding creep mechanism at a low temperature stage (T < 373 K, the dislocation glide creep mechanism at a medium temperature stage (373 K ≤ T < 418 K, and the dislocation climb creep mechanism at a high temperature stage (T ≥ 418 K. By comparative analysis of the fitting results and experiment data, they were found to be in agreement with the experimental data, revealing that the established creep constitutive equation is suitable for different temperatures and stresses.

Analysis of Current HT9 Creep Correlations and Modification

International Nuclear Information System (INIS)

Lee, Cheol Min; Sohn, Dongseong; Cheon, Jin Sik

2014-01-01

It has high thermal conductivity, high mechanical strength and low irradiation induced swelling. However high temperature creep of HT9 has always been a life limiting factor. Above 600 .deg. C, the dislocation density in HT9 is decreased and the M 23 C 6 precipitates coarsen, these processes are accelerated if there is irradiation. Finally microstructural changes at high temperature lead to lower creep strength and large creep strain. For HT9 to be used as a future cladding, creep behavior of the HT9 should be predicted accurately based on the physical understanding of the creep phenomenon. Most of the creep correlations are composed of irradiation creep and thermal creep terms. However, it is certain that in-pile thermal creep and out-of-pile thermal creep are different because of the microstructure changes induced from neutron irradiation. To explain creep behavior more accurately, thermal creep contributions other than neutron irradiation should be discriminated in a creep correlation. To perform this work, existing HT9 creep correlations are analyzed, and the results are used to develop more accurate thermal creep correlation. Then, the differences between in-pile thermal creep and out-of-pile thermal creep are examined

Study of portable particle accelerators used as neutron sources. Report 7-9. Characteristics of accelerators currently available on the market; Etude sur les accelerateurs de particules du type transportable utilises en tant que sources de neutrons. Rapport 7-9. Caracteristiques des accelerateurs actuellement sur le marche

Energy Technology Data Exchange (ETDEWEB)

Godar, Serge [Communaute europeenne de l' energie atomique - Euratom, Brussels (Belgium)

1964-08-15

This report indicates characteristics of available accelerators adapted to neutron production. Indicated information are for example: brand and type, brief description, maximum high voltage, ion source, ion current, gas introduction system, titanium self-target, beam focusing system, target diameter, reaction used for neutron production, target cooling, generator use temperature, dimensions, weight, manufacturer address, and so on [French] L'ensemble de cette etude bibliographique est traitee dans une serie de huit rapports, chacun ayant trait a un aspect ou un domaine particulier. Ce rapport (No. 7-9) a pour but de donner des renseignements generaux aux chercheurs desirant acquerir un accelerateur de particules adapte a la production de neutrons. Les recherches concernant les caracteristiques des appareils actuellement sur le marche ont ete arretees a la date du 15 octobre 1963. Il n'est malheureusement pas possible de garantir toutes les caracteristiques fournies, etant donne les modifications continuelles apportees a ces generateurs.

Determining a pool - type reactor fuel policy; Recherche d'une politique de gestion du combustible d'une pile piscine

Energy Technology Data Exchange (ETDEWEB)

NONE

1964-07-01

Refuelling the 10 to 15 MW pool type reactor considered here will occur frequently (some 10 elements every 3 to 4 weeks). It is therefore necessary to determine the most economic fuel policy. This study proposes to define a strategy that will make it possible to decide on the number and characteristics of the shipment containers, as well as on the means of storage, so as to reduce the risks as much as possible should the basic parameters of the study vary. Among these parameters, the respective influence of which is investigated, chemical reprocessing costs play a vital part. Two examples of optimum fuel management are given according to whether the reprocessing charges applied are those of the old or of the 1961 U.S. AEC base charges for reprocessing highly enriched irradiated fuel. (authors) [French] Les renouvellements du combustible de la pile piscine de 10 a 15 MW consideree ici, seront frequents (quelques 10 elements toutes les 3 ou 4 semaines). Il est donc important de connaitre les meilleures conditions de gestion economique de ce combustible. Cette etude se propose de definir une strategie permettant de choisir le nombre et les caracteristiques des containers de transport, ainsi que les moyens de stockage, de facon a minimiser les risques si les parametres de base de l'etude varient. Parmi ces parametres dont l'influence respective est successivement examinee, le cout du traitement chimique joue un role fondamental. Deux exemples d'optimum de gestion sont donnes selon que le tarif de retraitement est conforme a l'ancien tarif de l'U.S. AEC ou au tarif 1961 de traitement des combustibles irradies tres enrichis. (auteurs)

Possibilities and limitations of analogue methods for studying the dynamics of nuclear power stations; Possibilites et limitations du calcul analogique pour les etudes dynamiques de centrales nucleaires

Energy Technology Data Exchange (ETDEWEB)

Caillet, C; Deat, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

'on decrit en discutant la validite des approximations choisies. 4. Les simulateurs de machines tournantes: on souligne le caractere particulier que presentent les calculs des machines tournantes en raison de la necessite ou l'on est de passer par l'intermediaire d'abaques. On propose l'utilisation d'une memoire a acces aleatoire permettant un traitement analogique de ces problemes. 5. Etude d'une centrale nucleaire: on etudie, sur un exemple, les problemes poses par l'interconnexion d'elements du type precedent pour la simulation de grands ensembles (centrales nucleaires) et on souligne le role des elements ordinaires de calcul. 6. Conclusion: on souligne la necessite pour toutes ces etudes, de disposer d'un materiel de qualite et on discute la signification des resultats ainsi obtenus. (auteur)

Contribution to the study of turbulent flow in cylindrical tubing with porous walls; Contribution a l'etude de l'ecoulement turbulent dans une conduite cylindrique a paroi poreuse

Energy Technology Data Exchange (ETDEWEB)

Burnage, H

1962-07-01

A theoretical study has been made of a fully developed turbulent flow in cylindrical tubing of circular cross-section subjected to a uniform suction through the walls. This study has made it possible to find a relationship giving the friction coefficient at the wall in terms of the amount of local suction and of the longitudinal static pressure gradient. A method for calculating the Reynolds tensions from the pressure measurements has been devised. An experimental system has been developed. Pressure measurements have been made. By using experimental results it has been possible to obtain a semi empirical expression for the friction coefficient at the wall, in terms of the amount of suction of the inlet Reynolds number, and of the abscissa. (author) [French] Une etude theorique de refoulement turbulent pleinement developpe dans une conduite cylindrique de section circulaire soumise a une aspiration parietale uniforme a ete entreprise. Elle a permis de trouver une relation donnant le coefficient de frottement a la paroi en fonction du taux d'aspiration local et du gradient de pression statique longitudinal. Une methode de calcul des tensions de Reynolds a partir des mesures de pression a ete etablie. Un dispositif experimental a ete realise et mis au point. Des mesures de pression ont ete effectuees. L'utilisation des resultats experimentaux a permis d'obtenir une expression semi-empirique du coefficient de frottement a la paroi en fonction du taux d'aspiration, du nombre de Reynolds d'entree et de l'abscisse. (auteur)

Magnetothermoelastic creep analysis of functionally graded cylinders

International Nuclear Information System (INIS)

Loghman, A.; Ghorbanpour Arani, A.; Amir, S.; Vajedi, A.

2010-01-01

This paper describes time-dependent creep stress redistribution analysis of a thick-walled FGM cylinder placed in uniform magnetic and temperature fields and subjected to an internal pressure. The material creep, magnetic and mechanical properties through the radial graded direction are assumed to obey the simple power law variation. Total strains are assumed to be the sum of elastic, thermal and creep strains. Creep strains are time, temperature and stress dependent. Using equations of equilibrium, stress-strain and strain-displacement a differential equation, containing creep strains, for displacement is obtained. Ignoring creep strains in this differential equation a closed form solution for the displacement and initial magnetothermoelastic stresses at zero time is presented. Initial magnetothermoelastic stresses are illustrated for different material properties. Using Prandtl-Reuss relation in conjunction with the above differential equation and the Norton's law for the material uniaxial creep constitutive model, the radial displacement rate is obtained and then the radial and circumferential creep stress rates are calculated. Creep stress rates are plotted against dimensionless radius for different material properties. Using creep stress rates, stress redistributions are calculated iteratively using magnetothermoelastic stresses as initial values for stress redistributions. It has been found that radial stress redistributions are not significant for different material properties, however major redistributions occur for circumferential and effective stresses.

Creep cavitation effects in polycrystalline alumina

International Nuclear Information System (INIS)

Porter, J.R.; Blumenthal, W.; Evans, A.G.

1981-01-01

Fine grained polycrystalline alumina has been deformed in creep at high temperatures, to examine the evolution of cavities at grain boundaries. Cavities with equilibrium and crack-like morphologies have been observed, distributed nonuniformly throughout the material. The role of these cavities during creep has been described. A transition from equilibrium to crack-like morphology has been observed and correlated with a model based on the influence of the surface to boundary diffusivity ratio and the local tensile stress. The contribution of cavitation to the creep rate and total creep strain has been analyzed and excluded as the principal cause of the observed non-linear creep rate

Creep failure of a spray drier

CSIR Research Space (South Africa)

Carter, P

1998-06-01

Full Text Available , and creep. The calculations pointed to creep, and no positive metallurgic or physical evidence was discovered to support any of the hypotheses. However, the compression stresses implied that creep deformation could have occurred without inducing discernible...

Rapsodie first core manufacture. 1. part: processing plant; Fabrication du premier coeur de rapsodie. Premiere partie: l'atelier de fabrication

Energy Technology Data Exchange (ETDEWEB)

Masselot, Y; Bataller, S; Ganivet, M; Guillet, H; Robillard, A; Stosskopf, F [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1968-07-01

This report is the first in a series of three describing the processes, results and peculiar technical problems related to the manufacture of the first core of the fast reactor Rapsodie. A detailed study of manufacturing processes(pellets, pins, fissile sub-assemblies), the associated testings (raw materials, processed pellets and pins, sub-assemblies before delivery), manufacturing facilities and improvements for a second campaign are described. (author) [French] Ce rapport est le premier d'une serie de trois qui decrivent les procedes, les resultats et les problemes techniques particuliers de la fabrication du du premier coeur de la pile a neutrons rapides Rapsodie. Il comporte une etude detaillee des procedes de fabrication (pastilles, aiguilles, assemblages combustibles) et des methodes de controle associees (matieres premieres, pastilles et aiguilles en cours de fabrication, assemblages fissiles avant livraison), ainsi qu'une decription complete des installations de l'atelier de fabrication et les modifications apportees pour une deuxieme campagne. (auteur)

The strontium-90 equilibrium parameters in Saclay soil; Les parametres d'equilibre du strontium 90 dans le sol de Saclay

Energy Technology Data Exchange (ETDEWEB)

Cohen, P; Gailledreau, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The equilibrium parameters of {sup 90}Sr in the presence of the following elements: Ca, Na, K, NH{sub 4} are measured in the soil at Saclay for each of the pairs Sr-Ca, Sr-Na, Sr-K, Sr-NH{sub 4}. The adsorption mechanism for Sr is studied in comparison with a synthetic resin which is a pure ion-exchanger. A preliminary study of a three component system; one being a tracer, is outlined. (author) [French] Les parametres d'equilibre du {sup 90}Sr en presence des elements suivants: Ca, Na, K, NH{sub 4} sont mesures sur le sol de Saclay pour chacun des couples Sr-Ca, Sr-Na, Sr-K, Sr-NH{sub 4}. Le mecanisme d'adsorption du Sr est etudie par comparaison avec une resine synthetique qui est un echangeur d'ions pur. Une etude preliminaire d'un systeme a trois composants, dont l'un est un traceur, est exposee. (auteur)

Use of cadmium in solution in the EL 4 reactor moderator irreversible fixing of cadmium on the metallic surfaces; Utilisation du cadmium en solution dans le moderateur du reacteur EL 4 - fixation irreversible du cadmium sur les surfaces metalliques

Energy Technology Data Exchange (ETDEWEB)

Croix, O; Paoli, O; Lecomte, J; Dolle, L; Gallic, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

In the framework of research into the poisoning of the EL-4 reactor by cadmium sulphate, measurements have been made by two different methods of the residual amounts of cadmium liable to be fixed irreversibly on the surfaces in contact with the heavy water. A marked influence of the pH has been noticed. The mechanism of the irreversible fixing is compatible with the hypothesis of an ion-exchange in the surface oxide layer. In a sufficiently wide range of pH the cadmium thus fixed causes very little residual poisoning. The stability of the cadmium sulphate solutions is however rather low in the conditions of poisoning. (authors) [French] Dans le cadre des etudes sur l'empoisonnement du reacteur EL-4 par le sulfate de cadmium, les quantites residuelles de cadmium susceptibles de se fixer irreversiblement sur les parois que mouillerait l'eau lourde, ont ete mesurees experimentalement par deux methodes differentes. On observe une influence nette du pH. Le mecanisme de la fixation irreversible est compatible avec l'hypothese d'un echange d'ions dans la pellicule d'oxyde superficielle. Dans des limites suffisamment larges de pH, la cadmium ainsi fixe n'occasionne pas d'empoisonnement residuel important. La stabilite des solutions de sulfate de cadmium dans les conditions de l'empoisonnement est cependant mediocre. (auteurs)

Phenomenological approach to precise creep life prediction by means of quantitative evaluation of strain rate acceleration in secondary creep

International Nuclear Information System (INIS)

Sato, Hiroyuki; Miyano, Takaya

2010-01-01

A method of creep life prediction by means of Strain-Acceleration-Parameter (SAP), α, is presented. The authors show that the shape of creep curve can be characterized by SAP that reflects magnitude of strain-rate change in secondary creep. The SAP-values, α are evaluated on magnesium-aluminium solution hardened alloys. Reconstruction of creep curves by combinations of SAP and minimum-creep rates are successfully performed, and the curves reasonably agree with experiments. The advantage of the proposed method is that the required parameters evaluated from individual creep curves are directly connected with the minimum creep rate. The predicted times-to-failure agree well with that obtained by experiments, and possibility of precise life time prediction by SAP is pronounced.

Simultaneous consolidation and creep

DEFF Research Database (Denmark)

Krogsbøll, Anette

1997-01-01

Materials that exhibit creep under constant effective stress typically also show rate dependent behavior. The creep deformations and the rate sensitive behavior is very important when engineering and geological problems with large time scales are considered. When stress induced compaction...

Creep life assessment of Mod.9Cr-1Mo steel. Pt. 2. Quantitative evaluation of microstructural damage in creep-interrupted specimens

International Nuclear Information System (INIS)

Sawada, Kota; Maruyama, Kouichi; Komine, Ryuji; Nagae, Yuji

1998-02-01

Mod.9Cr-1Mo steel has a martensitic lath structure. Recovery of the lath structure takes place in the course of creep. Microstructural degradation due to the recovery results in the acceleration of creep rate and the subsequent failure of a specimen. Change of lath width during creep of the steel was quantitatively investigated to propose a residual life assessment methodology based on the recovery process. Since the steel was tempered at 1053K, the lath structure is thermally stable at the testing temperatures (848K-923K). However, recovery of lath structure readily takes place during creep, indicating that the recovery is induced by creep deformation. Lath width d increases with creep strain and saturates to a value d s determined by creep stress. The increase of d is faster at a higher stress and temperature. A normalized change in lath width, Δd/Δd s , was introduced to explain the variation of lath growth rate with creep stress and temperature. Δd is the change in lath width from the initial value d 0 , and Δd s is the difference between d s and d 0 . Δd/Δd s is uniquely related to creep strain ε and the relationship is independent of creep stress as well as creep temperature. This Δd/Δd s -ε relationship obtained by an accelerated creep test at a higher temperature or stress is applicable to any creep condition including service conditions of engineering plants. Creep strain can be evaluated from the measurement of Δd/Δd s based on the Δd/Δd s -ε relationship. A creep curve under any creep condition can readily be calculated by creep data of the steel. Combining these information one can assess residual life of a structural component made of the steel. (author)

Etude expérimentale du cliquetis à haut régime Experimental Study of Hight-Speed Knocking

Directory of Open Access Journals (Sweden)

Guibet J. C.

2006-11-01

Full Text Available La première partie de cette étude a consisté à observer et à tenter d'interpréter l'action des conditions de fonctionnement et des paramètres de réglage du moteur sur la tendance au cliquetis à haut régime. On a montré ensuite que les différentes familles chimiques d'hydrocarbures qui constituent les carburants classiques présentent chacune un comportement bien distinct en fonction de la richesse, de la pression et de la température d'admission. On a également étudié l'influence de la teneur en plomb du carburant et du type d'alkyle de plomb employé. Quelques expériences ont été effectuées afin de déterminer l'incidence d'une réduction de un point de taux de compression sur l'exigence en octane à haut régime et sur l'action des caractéristiques de composition du carburant. Enfin, en déterminant le pourcentage de cycles soumis au cliquetis pour différentes avances à l'allumage, il a été possible de fournir quelques indications permettant de mieux caractériser l'intensité du phénomène. The first part of this study consists in observing and trying to interpret the effect of operating conditions and engine tuning parameters on the tendency for high-speed knocking to appear. The different chemical families of the hydrocarbons making up conventional fuels are shown to each have a quite different behavior depending on the fuel-air equivalency ratio and the admission pressure and temperature. The influence of the lead content in the fuel and of the type of lead alkyl used is also studied. Some experiments were performed to determine the influence of a one-point reduction in the compression ratio on the high-speed octane requirement and on the effect of fuel composition properties. Lastly, by determing the percentage of cycles accompanied by knocking at different spark advances, some indications were found for better characterizing the intensity of the phenomenon.

Study of the point defects formed in cobalt by electron bombardment; Etude des defauts ponctuels crees par bombardement electronique dans le cobalt

Energy Technology Data Exchange (ETDEWEB)

Sulpice, G [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

1968-12-01

A study of the point defects formed in cobalt by electron bombardment is presented. The results are compared with those previously obtained for two other ferromagnetic metals of different structure, iron and nickel. In the first part we give a review of the literature concerning the creation of point defects, their contribution to resistivity and their annihilation mode in the three structure types. We then describe the experimental techniques adapted, in particular the study of the resistivity increase during a linear temperature rise. Our investigations concern the following, essential points : the observation of the successive annihilation stages of the point defects formed in pure cobalt, a study of the variations with respect to the doses and energy of the incident particles, and the determination of the annealing kinetics and the corresponding activation energies. The results are finally compared with the various models of point defect annihilation proposed for other metals: none of these interpretations is in perfect agreement with our results. In the case of cobalt we are thus led to modify the model proposed by our laboratory for iron an nickel. The difference between these three metals is explained by the anisotropic character of the cobalt matrix. (author) [French] Nous presentons une etude des defauts ponctuels crees par bombardement electronique dans le cobalt et comparons nos resultats a ceux obtenus precedemment dans deux autres metaux ferromagnetiques de structure differente, le fer et le nickel. Dans une premiere partie nous faisons une mise au point bibliographique comparee sur la creation des defauts, leur contribution a la resistivite et leur mode d'annihilation dans les trois types de structure. Nous decrivons ensuite les techniques experimentales mises au point, en particulier l'etude du revenu de la resistivite au cours d'une montee lineaire de temperature. Au cours de ce travail, nous avons mis en evidence les stades successifs d

Concrete creep and thermal stresses:new creep models and their effects on stress development

OpenAIRE

Westman, Gustaf

1999-01-01

This thesis deals with the problem of creep in concrete and its influence on thermal stress development. New test frames were developed for creep of high performance concrete and for measurements of thermal stress development. Tests were performed on both normal strength and high performance concretes. Two new models for concrete creep are proposed. Firstly, a viscoelastic model, the triple power law, is supplemented with two additional functions for an improved modelling of the early age cre...

Modelling of creep damage development in ferritic steels

Energy Technology Data Exchange (ETDEWEB)

Sandstroem, R [Swedish Institute for Metals Research, Stockholm (Sweden)

1999-12-31

The physical creep damage, which is observed in fossil-fired power plants, is mainly due to the formation of cavities and their interaction. It has previously been demonstrated that both the nucleation and growth of creep cavities can be described by power functions in strain for low alloy and 12 % CrMoV creep resistant steels. It possible to show that the physical creep damage is proportional to the product of the number of cavities and their area. Hence, the physical creep damage can also be expressed in terms of the creep strain. In the presentation this physical creep damage is connected to the empirical creep damage classes (1-5). A creep strain-time function, which is known to be applicable to low alloy and 12 % CrMoV creep resistant steels, is used to describe tertiary creep. With this creep strain - time model the residual lifetime can be predicted from the observed damage. For a given damage class the remaining life is directly proportional to the service time. An expression for the time to the next inspection is proposed. This expression is a function of fraction of the total allowed damage, which is consumed till the next inspection. (orig.) 10 refs.

Modelling of creep damage development in ferritic steels

Energy Technology Data Exchange (ETDEWEB)

Sandstroem, R. [Swedish Institute for Metals Research, Stockholm (Sweden)

1998-12-31

The physical creep damage, which is observed in fossil-fired power plants, is mainly due to the formation of cavities and their interaction. It has previously been demonstrated that both the nucleation and growth of creep cavities can be described by power functions in strain for low alloy and 12 % CrMoV creep resistant steels. It possible to show that the physical creep damage is proportional to the product of the number of cavities and their area. Hence, the physical creep damage can also be expressed in terms of the creep strain. In the presentation this physical creep damage is connected to the empirical creep damage classes (1-5). A creep strain-time function, which is known to be applicable to low alloy and 12 % CrMoV creep resistant steels, is used to describe tertiary creep. With this creep strain - time model the residual lifetime can be predicted from the observed damage. For a given damage class the remaining life is directly proportional to the service time. An expression for the time to the next inspection is proposed. This expression is a function of fraction of the total allowed damage, which is consumed till the next inspection. (orig.) 10 refs.

Fundamental study of ionization and dissociation processes caused by electron impact in aromatic molecules; application of the quasi-equilibrium theory to phenanthrene and to methylphenanthrenes; Etudes fondamentales des processus d'ionisation et de dissociation des molecules aromatiques par impact electronique et application de la theorie du quasi-equilibre au phenanthrene et aux methyl-phenanthrenes

Energy Technology Data Exchange (ETDEWEB)

Nounou, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

behaviour under ionizing radiations of the studied compounds. (author) [French] La theorie du quasi-equilibre n'a ete appliquee jusqu'a present qu'a la seule famille des hydrocarbures aliphatiques en chaine droite. Nous avons donc essaye de l'etendre au phenanthrene et au methyl-phenantrene, c'est-a-dire, d'une part a des molecules aromatiques et d'autre part a des molecules ayant un tres grand nombre de degres de liberte. Dans une premiere partie nous avons tente d'interpreter de facon methodique les processus d'ionisation et de dissociation des molecules phenanthreniques. Cette premiere etude experimentale du comportement des composes sous impact electronique, et son interpretation, nous ont fourni de precieux renseignements sur de profonds changements de structure des ions moleculaires et fragmentaires, voire d'excitation des molecules etudiees. L'etude approfondie des pics metastables a ensuite confirme les processus de dissociation precedents, tout en precisant certaines grandeurs thermodynamiques relatives aux reactions de decomposition. Etudes des processus d'ionisation, puis de dissociation, et enfin des pics metastables, constituent les trois temps d'une methode generale d'interpretation de la fragmentation en spectrometrie de masse. Pour donner a cette methode son assise theorique nous avons ete amenes a elaborer les diagrammes moleculaires de chacun des composes etudies, montrant ainsi l'aide efficace que peut presenter la Mecanique Quantique pour l'etude des etats excites et ionises. Dans une seconde partie, nous avons calcule les spectres de masse du phenanthrene et des methyl-phenanthrenes a partir des expressions des constantes de reaction donnees par ROSENSTOCK. Pour ce faire, nous avons propose de nouvelles methodes de calcul des facteurs de frequence, tant pour les molecules aliphatiques que les aromatiques. Si le bon accord generalement observe entre le calcul et l'experience ne peut etre attribue a coup sur a l'exactitude de la theorie, il n'en demontre

A Creep Model for High-Density Snow

Science.gov (United States)

2017-04-01

proportionality, Q = activation energy (Cal/mol), R = the ideal gas constant (1.985 Cal/mol K), and T = absolute temperature in Kelvin. Applying this, I...modifies Mellor and Smith’s creep model for dense snow to conform to the more general creep power law form (Glen’s creep law for ice is a special case of...this power law ). The present study used this general form as the basis for developing two creep models: one to describe the pri- mary creep and

A simple model for indentation creep

Science.gov (United States)

Ginder, Ryan S.; Nix, William D.; Pharr, George M.

2018-03-01

A simple model for indentation creep is developed that allows one to directly convert creep parameters measured in indentation tests to those observed in uniaxial tests through simple closed-form relationships. The model is based on the expansion of a spherical cavity in a power law creeping material modified to account for indentation loading in a manner similar to that developed by Johnson for elastic-plastic indentation (Johnson, 1970). Although only approximate in nature, the simple mathematical form of the new model makes it useful for general estimation purposes or in the development of other deformation models in which a simple closed-form expression for the indentation creep rate is desirable. Comparison to a more rigorous analysis which uses finite element simulation for numerical evaluation shows that the new model predicts uniaxial creep rates within a factor of 2.5, and usually much better than this, for materials creeping with stress exponents in the range 1 ≤ n ≤ 7. The predictive capabilities of the model are evaluated by comparing it to the more rigorous analysis and several sets of experimental data in which both the indentation and uniaxial creep behavior have been measured independently.

Trunk proprioception adaptations to creep deformation.

Science.gov (United States)

Abboud, Jacques; Rousseau, Benjamin; Descarreaux, Martin

2018-01-01

This study aimed at identifying the short-term effect of creep deformation on the trunk repositioning sense. Twenty healthy participants performed two different trunk-repositioning tasks (20° and 30° trunk extension) before and after a prolonged static full trunk flexion of 20 min in order to induce spinal tissue creep. Trunk repositioning error variables, trunk movement time and erector spinae muscle activity were computed and compared between the pre- and post-creep conditions. During the pre-creep condition, significant increases in trunk repositioning errors, as well as trunk movement time, were observed in 30° trunk extension in comparison to 20°. During the post-creep condition, trunk repositioning errors variables were significantly increased only when performing a 20° trunk extension. Erector spinae muscle activity increased in the post-creep condition, while it remained unchanged between trunk repositioning tasks. Trunk repositioning sense seems to be altered in the presence of creep deformation, especially in a small range of motion. Reduction of proprioception acuity may increase the risk of spinal instability, which is closely related to the risk of low back pain or injury.

Creep and Creep-Fatigue Crack Growth at Structural Discontinuities and Welds

Energy Technology Data Exchange (ETDEWEB)

Dr. F. W. Brust; Dr. G. M. Wilkowski; Dr. P. Krishnaswamy; Mr. Keith Wichman

2010-01-27

The subsection ASME NH high temperature design procedure does not admit crack-like defects into the structural components. The US NRC identified the lack of treatment of crack growth within NH as a limitation of the code and thus this effort was undertaken. This effort is broken into two parts. Part 1, summarized here, involved examining all high temperature creep-fatigue crack growth codes being used today and from these, the task objective was to choose a methodology that is appropriate for possible implementation within NH. The second part of this task, which has just started, is to develop design rules for possible implementation within NH. This second part is a challenge since all codes require step-by-step analysis procedures to be undertaken in order to assess the crack growth and life of the component. Simple rules for design do not exist in any code at present. The codes examined in this effort included R5, RCC-MR (A16), BS 7910, API 579, and ATK (and some lesser known codes). There are several reasons that the capability for assessing cracks in high temperature nuclear components is desirable. These include: (1) Some components that are part of GEN IV reactors may have geometries that have sharp corners - which are essentially cracks. Design of these components within the traditional ASME NH procedure is quite challenging. It is natural to ensure adequate life design by modeling these features as cracks within a creep-fatigue crack growth procedure. (2) Workmanship flaws in welds sometimes occur and are accepted in some ASME code sections. It can be convenient to consider these as flaws when making a design life assessment. (3) Non-destructive Evaluation (NDE) and inspection methods after fabrication are limited in the size of the crack or flaw that can be detected. It is often convenient to perform a life assessment using a flaw of a size that represents the maximum size that can elude detection. (4) Flaws that are observed using in-service detection

Creep and Creep-Fatigue Crack Growth at Structural Discontinuities and Welds

International Nuclear Information System (INIS)

Brust, F.W.; Wilkowski, G.M.; Krishnaswamy, P.; Wichman, Keith

2010-01-01

The subsection ASME NH high temperature design procedure does not admit crack-like defects into the structural components. The US NRC identified the lack of treatment of crack growth within NH as a limitation of the code and thus this effort was undertaken. This effort is broken into two parts. Part 1, summarized here, involved examining all high temperature creep-fatigue crack growth codes being used today and from these, the task objective was to choose a methodology that is appropriate for possible implementation within NH. The second part of this task, which has just started, is to develop design rules for possible implementation within NH. This second part is a challenge since all codes require step-by-step analysis procedures to be undertaken in order to assess the crack growth and life of the component. Simple rules for design do not exist in any code at present. The codes examined in this effort included R5, RCC-MR (A16), BS 7910, API 579, and ATK (and some lesser known codes). There are several reasons that the capability for assessing cracks in high temperature nuclear components is desirable. These include: (1) Some components that are part of GEN IV reactors may have geometries that have sharp corners - which are essentially cracks. Design of these components within the traditional ASME NH procedure is quite challenging. It is natural to ensure adequate life design by modeling these features as cracks within a creep-fatigue crack growth procedure. (2) Workmanship flaws in welds sometimes occur and are accepted in some ASME code sections. It can be convenient to consider these as flaws when making a design life assessment. (3) Non-destructive Evaluation (NDE) and inspection methods after fabrication are limited in the size of the crack or flaw that can be detected. It is often convenient to perform a life assessment using a flaw of a size that represents the maximum size that can elude detection. (4) Flaws that are observed using in-service detection

Study of the {eta} meson production and decay in {pi}{sup +} - d interactions between 600 and 900 MeV; Etude de la production et de la desintegration du meson {eta} dans les interactions {pi}{sup +} - deuterium entre 600 et 900 MeV

Energy Technology Data Exchange (ETDEWEB)

Pauli, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

The reaction {pi}{sup +} + d {yields} p + p + {eta} is observed in the 35 cm and 50 cm deuterium bubble chambers of the L.P.C.H.E. in Saclay. A total of 150000 pictures has been taken at six incident energies of the {pi}{sup +} between 600 MeV and 900 MeV in a {pi}{sup +} separated beam at Saturne. The results of this study show that the {eta} production cross section increases rapidly at threshold, then decreases slowly at higher energies. The {eta} production cross section increases rapidly at threshold, then decreases slowly at higher energies. The {eta} production angular distribution in the {pi}{sup +} - neutron c.m.s. is isotropic. From both of these facts, we conclude that the {eta} is produced in a S wave near threshold. As for the {eta} decay, the values of the following branching ratios have been determined: {gamma}{sub {eta}} ({gamma}{gamma})/{gamma}{sub {eta}} ({pi}{sup 0}{pi}{sup 0}{pi}{sup 0}) = 1.1 {+-} 0.5; {gamma}{sub {eta}} ({pi}{sup +}{pi}{sup -}{gamma})/{gamma}{sub {eta}} ({pi}{sup +}{pi}{sup -}{pi}{sup 0}) = 0.73 {+-} 0.25; {gamma}{sub {eta}} (neutrals)/{gamma}{sub {eta}} ({pi}{sup +}{pi}{sup -}{pi}{sup 0}) = 3.8 {+-} 1.1; {gamma}{sub {eta}} (neutrals)/{gamma}{sub {eta}} (charged) = 2.2 {+-} 0.35. Finally, we compare the {eta} production and decay results with the different theoretical predictions. (author) [French] La reaction {pi}{sup +} + d {yields} p + p + {eta} est observee dans les chambres a bulles a deuterium de 35 cm et de 50 cm du L.P.C.H.E. a Saclay. L'energie incidente du {pi}{sup +} varie de 600 a 900 MeV et environ 150000 photos ont ete prises au total aupres de Saturne. Cette etude nous montre que la section efficace de production du {eta} augmente tres rapidement a partir du seuil et diminue a energie plus elevee. La distribution angulaire de production du {eta} dans le systeme {pi}{sup +} neutron est compatible avec une distribution isotrope. Ces deux resultats nous amenent a conclure que le {eta} est sans doute produit dans

Room temperature creep in metals and alloys

Energy Technology Data Exchange (ETDEWEB)

Deibler, Lisa Anne [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Materials Characterization and Performance

2014-09-01

Time dependent deformation in the form of creep and stress relaxation is not often considered a factor when designing structural alloy parts for use at room temperature. However, creep and stress relaxation do occur at room temperature (0.09-0.21 T_m for alloys in this report) in structural alloys. This report will summarize the available literature on room temperature creep, present creep data collected on various structural alloys, and finally compare the acquired data to equations used in the literature to model creep behavior. Based on evidence from the literature and fitting of various equations, the mechanism which causes room temperature creep is found to include dislocation generation as well as exhaustion.

Flexural creep behaviour of jute polypropylene composites

Science.gov (United States)

Chandekar, Harichandra; Chaudhari, Vikas

2016-09-01

Present study is about the flexural creep behaviour of jute fabric reinforced polypropylene (Jute-PP) composites. The PP sheet and alkali treated jute fabric is stacked alternately and hot pressed in compression molding machine to get Jute-PP composite laminate. The flexural creep study is carried out on dynamic mechanical analyzer. The creep behaviour of the composite is modeled using four-parameter Burgers model. Short-term accelerated creep testing is conducted which is later used to predict long term creep behaviour. The feasibility of the construction of a master curve using the time-temperature superposition (TTS) principle to predict long term creep behavior of unreinforced PP and Jute-PP composite is investigated.

LES VARIANTES LEXICALES POUR LE MOT ESPADRILLES AU PARANÁ ET DANS LA RÉGION NORD-EST DU BRÉSIL: UNE ETUDE ETHNOLINGUISTIQUE

Directory of Open Access Journals (Sweden)

Maranúbia Pereira Barbosa Doiron

2014-03-01

Full Text Available : Cette étude concerne les variantes lexicales pour le mot espadrilles dans l’Etat du Paraná et dans la région Nord-Est du Brésil, sous un regard ethnolinguistique. Le corpus est composé par les donnés obtenues à partir de la question numéro 276 du Questionnaire Semantique-Lexical de l’Atlas Linguistique du Paraná (ALPR, dont l’auteur est le professeur Vanderci de Andrade Aguilera (1994, de l’Université de l’Etat de Londrina, autant que les variantes lexicales pour le mot espadrilles trouvées dans deux ouvrages littéraires d’auteurs originaires du Nord-Est du Brésil – Fogo Morto, de José Lins do Rego (2009 et Vidas Secas, de Graciliano Ramos (1969. Dans ces livres, les espadrilles jouent un rôle fondamental, tout en reflétant son importance dans le vestiaire de cette région, du moins jusqu’à moitié du XXème siècle. On rechercha des éventuelles ressemblances ou différences existentes entre les variantes lexicales de la chaussure mentionnée par les informateurs “paranaenses” et le modèle cité dans les ouvrages des écrivains Rego et Ramos. Dans les deuxs sources – la linguistique et la littéraire – on privilégia l’analyse semantique des unités lexicales et le contexte dans lequel elles ont été enregistrées. L’étude démontra que l’unité lexicale espadrilles et ses variantes phonétiques similaires dans les deux corpora, aussi que les variantes lexicales populaires présentes dans l’Atlas Linguistique du Paraná (ALPR. En dépit des simitudes l’esthétique et la fonction des espadrilles ne sont pas les mêmes dans les localitées concernées.

LES VARIANTES LEXICALES POUR LE MOT ESPADRILLES AU PARANÁ ET DANS LA RÉGION NORD-EST DU BRÉSIL: UNE ETUDE ETHNOLINGUISTIQUE

Directory of Open Access Journals (Sweden)

Vanderci de Andrade AGUILERA

2013-12-01

Full Text Available Cette étude concerne les variantes lexicales pour le mot espadrilles dans l’Etat du Paraná et dans la région Nord-Est du Brésil, sous un regard ethnolinguistique. Le corpus est composé par les donnés obtenues à partir de la question numéro 276 du Questionnaire Semantique-Lexical de l’Atlas Linguistique du Paraná (ALPR, dont l’auteur est le professeur Vanderci de Andrade Aguilera (1994, de l’Université de l’Etat de Londrina, autant que les variantes lexicales pour le mot espadrilles trouvées dans deux ouvrages littéraires d’auteurs originaires du Nord-Est du Brésil – Fogo Morto, de José Lins do Rego (2009 et Vidas Secas, de Graciliano Ramos (1969. Dans ces livres, les espadrilles jouent un rôle fondamental, tout en reflétant son importance dans le vestiaire de cette région, du moins jusqu’à moitié du XXème siècle. On rechercha des éventuelles ressemblances ou différences existentes entre les variantes lexicales de la chaussure mentionnée par les informateurs “paranaenses” et le modèle cité dans les ouvrages des écrivains Rego et Ramos. Dans les deuxs sources – la linguistique et la littéraire – on privilégia l’analyse semantique des unités lexicales et le contexte dans lequel elles ont été enregistrées. L’étude démontra que l’unité lexicale espadrilles et ses variantes phonétiques similaires dans les deux corpora, aussi que les variantes lexicales populaires présentes dans l’Atlas Linguistique du Paraná (ALPR. En dépit des simitudes l’esthétique et la fonction des espadrilles ne sont pas les mêmes dans les localitées concernées.

PENULISAN ETUDE-ETUDE MUSIK TALEMPONG UNGGAN (Sebuah Usaha Pembelajaran Musik Tradisi Berbasis Literatur

Directory of Open Access Journals (Sweden)

Asri MK

2014-12-01

Full Text Available “Talempong unggan”, a traditional music from Minangkabau community particularly in Unggan, Sumpur Kudus, Sijunjung Regency, West Sumatera Indonesia is classified into genre of “talempong duduak” (rea. Due to its special musical concept and the playing technics, this traditional music is selected as a practising course in the Karawitan Department of Indonesian Institute of Art (ISI Padang Panjang since 1993 till now. In a system of class learning with many students, Talempong Unggan definitely needs supporting methods and learning technics suitable for the course where the students can reach their maximum skills. All the melody of “talempong unggan” that has been made as a material of practice is transcribed to the system of numeric notation and rhythm motive of “gendang” and “aguang” which is written into signs and special notation. All of qualitative data is formulated into finding methods, technics and etude of learning ensamble of Talempong Unggan the traditional music that learned in Karawitan Department of ISI Padang Panjang. Key words: Talempong Unggan, Methods, Technics, Etude

A crystallographic and spectroscopic study of crystal sites in the 'spinel' structure; Etude cristallographique et spectroscopique des sites cristallins dans la structure 'spinelle'

Energy Technology Data Exchange (ETDEWEB)

Drifford, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-15

A crystallographic study on magnesium aluminates led to the determination of crystal site average distortion. A spectroscopic study of transition elements doped spinels gave the position of the doping element in tetrahedral (A) or octahedral (B) sites, and the local distortion of the latter. The comparison of average and local parameters points to differences in the behaviour of doping elements and shows the size of (A) sites are independent of the host crystal composition while the average size of (B) sites varies with the composition. (author) [French] Une etude cristallographique des aluminates de magnesium a permis de determiner la deformation moyenne des sites cristallins. Une etude spectroscopique des aluminates de magnesium dopes avec des elements de transition a permis de localiser les dopants entre les sites tetraedriques (A) et octaedriques (B) et d'etudier la deformation locale de ces sites. La comparaison entre les parametres moyens et locaux a caracterise le comportement du dopant et montre que les dimensions des sites (A) sont independantes de la composition de la matrice, alors que les caracteristiques geometriques moyennes des sites (B) varient continument avec la composition. (auteur)

Assessment of concrete creep and shrinkage

International Nuclear Information System (INIS)

Trivedi, Neha; Singh, R.K.

2012-01-01

B-3 model prediction of concrete creep and shrinkage strains on cylindrical specimen and BARC Containment test model (BARCOM) are presented. Experimental shrinkage strain is shown to be in agreement with B-3 model predictions for cylindrical specimen and BARCOM. Creep strain in cylindrical specimen is found to be in agreement with B-3 model. In BARCOM for wall cast in different pores, creep strain is in agreement with B-3 model in hoop direction however in longitudinal direction, observed creep strain in higher than B-3 model. For dome structure cast in a single pour, experimental creep strain shows confirmity with B-3 model both in hoop and longitudinal directions. The study on concrete aging and average longitudinal shrinkage strain is carried out. (author)

Irradiation-induced creep in graphite: a review

International Nuclear Information System (INIS)

Price, R.J.

1981-08-01

Data on irradiation-induced creep in graphite published since 1972 are reviewed. Sources include restrained shrinkage tests conducted at Petten, the Netherlands, tensile creep experiments with continuous strain registration at Petten and Grenoble, France, and controlled load tests with out-of-reactor strain measurement performed at Oak Ridge National Laboratory, Petten, and in the United Kingdom. The data provide reasonable confirmation of the linear viscoelastic creep model with a recoverable transient strain component followed by a steady-state strain component, except that the steady-state creep coefficient must be treated as a function of neutron fluence and is higher for tensile loading than for compressive loading. The total transient creep strain is approximately equal to the preceding elastic strain. No temperature dependence of the transient creep parameters has been demonstrated. The initial steady-state creep coefficient is inversely proportional to the unirradiated Young modulus

Injection and temporary capture of a charged particle beam in an open magnetic configuration. Optimization of the configuration. Case of cylindrical symmetry: A mirror machine; Etude de l'injection et de la capture temporaire d'un faisceau de particules chargees dans une configuration magnetique ouverte. Optimisation de la configuration. Cas de la symetrie de revolution: Machine a miroirs

Energy Technology Data Exchange (ETDEWEB)

Capdequi-Peyranere, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-12-01

A study has been made of a new method of transverse injection of charged particles into a magnetic mirror configuration. This injection scheme permits the penetration and temporary capture by non-adiabatic effect of a particle beam of approximately 1 cm{sup 2} cross-section. A theoretical study of the injection and capture is made in the approximation that space charge is negligible. The original programs for IBM 7094 computer calculations are described; these programs were used to obtain an optimization of the configuration. The results of a statistical numerical study of the optimum configuration are then given. This study indicates that, if the energy of the particles of the beam is about 1 per cent greater than a minimum penetration energy, the entire beam can be captured with an average capture length of 100 meters (50 reflections between the two mirrors). If the energy is about 4 per cent greater than the minimum penetration energy, the capture length is reduced to 40 meters. We have studied the distribution of energy transverse and longitudinal with the magnetic field for the population of captured particles. For the cases of injected molecular hydrogen ions or heavy CH{sub 4}{sup +} ions, a study is made of the capture time of protons resulting from the dissociation of the ions by collisions with the neutral gas. Finally, we describe a model experiment using electrons designed to provide an experimental verification of the capture of the primary beam. (author) [French] On etudie un nouveau schema d'injection transversale de particules chargees dans une configuration magnetique a miroirs. Ce mode d'injection permet la penetration et la capture temporaire par effet non adiabatique d'un faisceau de particules presentant une section de l'ordre de 1 cm{sup 2}. Une etude theorique du probleme de l'injection et de la capture est faite en supposant la charge d'espace negligeable. On decrit des programmes originaux de calcul sur ordinateur IBM 7094 permettant l

Irradiation Creep in Graphite

Energy Technology Data Exchange (ETDEWEB)

Ubic, Rick; Butt, Darryl; Windes, William

2014-03-13

An understanding of the underlying mechanisms of irradiation creep in graphite material is required to correctly interpret experimental data, explain micromechanical modeling results, and predict whole-core behavior. This project will focus on experimental microscopic data to demonstrate the mechanism of irradiation creep. High-resolution transmission electron microscopy should be able to image both the dislocations in graphite and the irradiation-induced interstitial clusters that pin those dislocations. The team will first prepare and characterize nanoscale samples of virgin nuclear graphite in a transmission electron microscope. Additional samples will be irradiated to varying degrees at the Advanced Test Reactor (ATR) facility and similarly characterized. Researchers will record microstructures and crystal defects and suggest a mechanism for irradiation creep based on the results. In addition, the purchase of a tensile holder for a transmission electron microscope will allow, for the first time, in situ observation of creep behavior on the microstructure and crystallographic defects.

Biaxial Creep Specimen Fabrication

Energy Technology Data Exchange (ETDEWEB)

JL Bump; RF Luther

2006-02-09

This report documents the results of the weld development and abbreviated weld qualification efforts performed by Pacific Northwest National Laboratory (PNNL) for refractory metal and superalloy biaxial creep specimens. Biaxial creep specimens were to be assembled, electron beam welded, laser-seal welded, and pressurized at PNNL for both in-pile (JOYO reactor, O-arai, Japan) and out-of-pile creep testing. The objective of this test campaign was to evaluate the creep behavior of primary cladding and structural alloys under consideration for the Prometheus space reactor. PNNL successfully developed electron beam weld parameters for six of these materials prior to the termination of the Naval Reactors program effort to deliver a space reactor for Project Prometheus. These materials were FS-85, ASTAR-811C, T-111, Alloy 617, Haynes 230, and Nirnonic PE16. Early termination of the NR space program precluded the development of laser welding parameters for post-pressurization seal weldments.

Biaxial Creep Specimen Fabrication

International Nuclear Information System (INIS)

JL Bump; RF Luther

2006-01-01

This report documents the results of the weld development and abbreviated weld qualification efforts performed by Pacific Northwest National Laboratory (PNNL) for refractory metal and superalloy biaxial creep specimens. Biaxial creep specimens were to be assembled, electron beam welded, laser-seal welded, and pressurized at PNNL for both in-pile (JOYO reactor, O-arai, Japan) and out-of-pile creep testing. The objective of this test campaign was to evaluate the creep behavior of primary cladding and structural alloys under consideration for the Prometheus space reactor. PNNL successfully developed electron beam weld parameters for six of these materials prior to the termination of the Naval Reactors program effort to deliver a space reactor for Project Prometheus. These materials were FS-85, ASTAR-811C, T-111, Alloy 617, Haynes 230, and Nirnonic PE16. Early termination of the NR space program precluded the development of laser welding parameters for post-pressurization seal weldments

Creep analysis of orthotropic shells

International Nuclear Information System (INIS)

Mehra, V.K.; Ghosh, A.

1975-01-01

A method of creep analysis of orthotropic cylindrical shells subjected to axisymmetric loads has been developed. A general study of creep behaviour of cylindrical shells subjected to a uniform internal pressure has been conducted for a wide range of values of anisotropy coefficients and creep law exponent. Analysis includes determination of stress re-distribution, strain rates, stationary state stresses. Application of reference stress technique has been extended to analysis of shells. (author)

Point defects and the creep of metals

International Nuclear Information System (INIS)

Nichols, F.A.

1976-01-01

Basic concepts felt to be important in diffusion-controlled creep of metals are reviewed and it is suggested that such creep is controlled by edge-dislocation climb under a rather wide range of conditions. The effect of a damage-producing flux on such creep processes is explored. It is shown that processes such as Herring-Nabarro creep are unaffected by irradiation. Evidence is presented for a climb-plus-glide mechanism of radiation creep for stresses above unirradiated yield or flow stresses. At lower stresses a preferential dislocation loop nucleation model is suggested

Creep, fatigue and creep-fatigue damage evaluation and estimation of remaining life of SUS 304 austenitic stainless steel at high temperature

International Nuclear Information System (INIS)

Nishino, Seiichi; Sakane, Masao; Ohnami, Masateru

1986-01-01

Experimental study was made on the damage evaluation and estimation of remaining life of SUS 304 stainless steel in creep, low-cycle fatigue and creep-fatigue at 873 K in air. Creep, fatigue and creep-fatigue damage curves were drawn by the method proposed by D.A. Woodford and the relations between these damages and non-destructive parameters, i.e., microvickers hardness and quantities obtained from X-ray diffraction, were discussed. From these tests, the following conclusions were obtained. (1) Constant damage lines in the diagram of remaining lives in creep and fatigue could be drawn by changing load levels during the tests. Constant damage lines in creep-fatigue were also made by a linear damage rule using both static creep and fatigue damage curves, which agree well with the experimental data in creep-fatigue. (2) Microvickers hardness and half-value breadth in X-ray diffraction are appropriate parameters to evaluate creep damage but are not proper to evaluate fatigue damage. Particle size and microstrain obtained by X-ray profile analysis are good parameters to evaluate both creep and fatigue damages. (author)

Radiation effects on time-dependent deformation: Creep and growth

International Nuclear Information System (INIS)

Simonen, E.P.

1989-03-01

Observations of irradiation creep strain as well as irradiation growth strain and related microstructures are reviewed and compared to mechanisms for radiation effects on time-dependent deformation. Composition, microstructure, stress and temperature affect irradiation creep less than thermal creep. Irradiation creep rates can often dominate thermal creep rates, particularly at low temperatures and low stresses. Irradiation creep mechanisms are classified in two general categories: (1) stress-induced preferential absorption and (2) climb-glide. In the former, creep results from dislocation climb, whereas in the latter, creep results from dislocation glide. The effects of irradiation creep on failure modes in nuclear environments are discussed. 53 refs., 18 figs., 1 tab

Synopsis of research conducted under the 1991/92 northern contaminants program: from a workshop in support of the technical and science managers committees on northern ecosystems and native diets, Ottawa, Ontario, March 24-25, 1992

National Research Council Canada - National Science Library

Murray, J. L; Shearer, R. G

1992-01-01

.... Ce repport stipule le resume des resultats de recherches et etudes surveilles entreprises sous les auspices de la Strategie pour l'Environnemente Arctique du Plan Vert du Canada en 1991/92 concernant...

Contribution to the crystallographic study of the uranium-oxygenated system; Contribution a l'etude cristallographique du systeme uranium-oxygene

Energy Technology Data Exchange (ETDEWEB)

Perio, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-04-15

Three uranium oxides, UO{sub 2}, U{sub 3}O{sub 8} and UO{sub 3} are known since a long time. The existence of a fourth, U{sub 2}O{sub 5}, is discussed. The mechanisms of decomposition between UO{sub 3} and U{sub 3}O{sub 8} have even some shadow zones. The aim of this report is the study of the phase relations in an uranium - oxygen system, from the metal until UO{sub 3}. We considered, on the one hand, the equilibrium relations, what should result in a diagram of phases in pressures and temperatures, on the other hand, the transformations bringing one oxide to the other, often by a continuous way and through intermediate of metastable phases. The introduction of the temperature and the consideration of the kinetics effects have permitted to raise the ambiguities. We adopted, to facilitate the presentation of the results, a partition a few arbitrary but convenient, in three chapters,: I - experimental Techniques II - Crystallographic species between U and UO{sub 3}. III - Kinetic of oxidisation of UO{sub 2}. (M.B.) [French] Trois oxydes d'uranium, UO{sub 2}, U{sub 3}O{sub 8} et UO{sub 3} sont connus depuis longtemps. L'existence d'un quatrieme, U{sub 2}O{sub 5}, est en suspend. Les mecanismes de decomposition entre UO{sub 3} et U{sub 3}O{sub 8} possedent encore quelques zones d mbres. Le but propose dans ce memoire est l'etude des relations de phase dans le systeme uranium - oxygene, du metal jusqu'a UO{sub 3}. Nous avons ete amene a considerer, d'une part, les relations a l'equilibre, ce qui devrait se traduire par un diagramme de phases en pressions et temperatures, d'autre part, les transformations amenant, souvent d'une facon continue et par l'intermediaire de phases metastables, d'un oxyde a l'autre. L'introduction de la temperature et la consideration des effets de cinetique ont le plus souvent permis de lever les ambiguites rencontrees. Nous avons adopte, pour faciliter la presentation des resultats, une division un peu arbitraire mais commode, en trois

A study of the conformation and stability of nitroxide free radicals; Etude de la conformation et de la stabilite de radicaux libres nitroxydes

Energy Technology Data Exchange (ETDEWEB)

Briere, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-03-01

les constantes de couplage des protons situes en {gamma} de l'azote ont une dependance spatiale tres marquee au meme titre que les protons situes en {beta}, ce que les etudes anterieures n'avaient pu preciser. Une analyse conformationnelle est effectuee par RMN a 310 MHz, en temperature variable. La synthese du di-t-butyl nitroxyde marque au carbone 13 en position {alpha} du groupement nitroxyde a permis de determiner avec certitude la constante d'interaction hyperfine electron carbone 13 quaternaire, grandeur qui n'avait pas ete mesuree jusqu'alors. Les constantes de couplage mesurees dans les radicaux piperidiniques tetramethyles en 2,2,6,6 ont pu etre ensuite attribuees a des carbones 13 situes en {beta} de l'azote, et leur variation a pu etre reliee a la conformation des cycles. C'est l'objet de la seconde partie. Dans un dernier chapitre, l'etude cinetique d'un radical nitroxyde instable, ayant un hydrogene en {beta}, met en evidence une decomposition bimoleculaire qui met en jeu la rupture de la liaison C-H; ceci est demontre par effet isotopique primaire. On peut conclure de cette etude qu'un nitroxyde est stable lorsque les differents groupes attaches a l'atome d'azote ne peuvent provoquer une decomposition du radical, soit intramoleculairement, si la geometrie de la molecule le permet, soit intermoleculairement par dimerisation sur un autre centre d'une molecule voisine, conduisant ainsi a une fragmentation ou a une disproportionation. (auteur)

Creep characterization of type 316LN and HT-9 stainless steels by the K-R creep damage model

International Nuclear Information System (INIS)

Kim, Woo Gon; Kim, Sung Ho; Ryu, Woo Seog

2001-01-01

The Kachanov and Rabotnov (K-R) creep damage model was interpreted and applied to type 316LN and HT-9 stainless steels. Seven creep constants of the model, A, B, k, m, λ, γ, and q were determined for type 316LN stainless steel. In order to quantify a damage parameter, the cavity was interruptedly traced during creep for measuring cavity area to be reflected into the damage equation. For type 316LN stainless steel, λ=ε R /ε * and λ f =ε/ε R were 3.1 and increased with creep strain. The creep curve with λ=3.1 depicted well the experimental data to the full lifetime and its damage curve showed a good agreement when γ=24. However for the HT-9 stainless steel, the values of λ and λ f were different as λ=6.2 and λ f =8.5, and their K-R creep curves did not agree with the experimental data. This mismatch in the HT-9 steel was due to the ductile fracture by softening of materials rather than the brittle fracture by cavity growth. The differences of the values in the above steels were attributed to creep ductilities at the secondary and the tertiary creep stages

Creep equations for gas turbine materials

International Nuclear Information System (INIS)

Kloos, K.H.; Granacher, J.; Preussler, T.

1988-01-01

The long-term high-temperature deformation behaviour of typical gas turbine materials can be described on the basis of a differentiated evaluation which takes the results from thermal tension tests, short-term creep tests with continuous extension measurement, long-term creep tests with discontinuous extension measurement as well as annealing tests with contraction measurement into account. By this, especially the 'negative creeping' can be controlled. Equations were developed for individual materials of the type IN-738 LC, IN-939, IN-100 and FSX-414, which describe the high-temperature deformation behaviour with consideration to the primary and secondary creeping and partly the tertiary creeping. The equations are valid in the entire application-relevant range, i.e. up to 100 000 h in the case of industrial turbine materials. (orig.) [de

Creep collapse of TAPS fuel cladding

International Nuclear Information System (INIS)

Chaudhry, S.M.; Anand, A.K.

1975-01-01

Densification of UO 2 can cause axial gaps between fuel pelets and cladding in unsupported (internally) at these regions. An analysis is carried out regarding the possibility of creep collapse in these regions. The analysis is based on Timoshenko's theory of collapse. At various times during the residence of fuel in reactor following parameters are calculated : (1) inelastic collapse of perfectly circular tubes (2) plastic instability in oval tubes (3) effect of creep on ovality. Creep is considered to be a non-linear combination of the following : (a) thermal creep (b) intresenic creep (c) stress aided radiation enhanced (d) stress free growth (4) Critical pressure ratio. The results obtained are compared with G.E. predictions. The results do not predict collapse of TAPS fuel cladding for five year residence time. (author)

Large earthquakes and creeping faults

Science.gov (United States)

Harris, Ruth A.

2017-01-01

Faults are ubiquitous throughout the Earth's crust. The majority are silent for decades to centuries, until they suddenly rupture and produce earthquakes. With a focus on shallow continental active-tectonic regions, this paper reviews a subset of faults that have a different behavior. These unusual faults slowly creep for long periods of time and produce many small earthquakes. The presence of fault creep and the related microseismicity helps illuminate faults that might not otherwise be located in fine detail, but there is also the question of how creeping faults contribute to seismic hazard. It appears that well-recorded creeping fault earthquakes of up to magnitude 6.6 that have occurred in shallow continental regions produce similar fault-surface rupture areas and similar peak ground shaking as their locked fault counterparts of the same earthquake magnitude. The behavior of much larger earthquakes on shallow creeping continental faults is less well known, because there is a dearth of comprehensive observations. Computational simulations provide an opportunity to fill the gaps in our understanding, particularly of the dynamic processes that occur during large earthquake rupture and arrest.

Creep cavity and carbide studies during creep of a 12%CrMoV-steel

Energy Technology Data Exchange (ETDEWEB)

Andersson, Henrik; Storesund, J.; Seitisleam, F.

1997-03-01

Uniaxial creep tests of a X20CrMoV 12 1 steel has been carried out. The work was performed as a follow-up on earlier investigations on a similar steel with lower creep ductility. A comparison with this previous work is included. Both interrupted and rupture tests were performed and studies were made of cavity formation processes and carbide transformations. The creep curves could be reproduced using an analytical model. No secondary creep was observed. Cavities were found to form already at a strain of 1%. The cavity density, mean diameter and cavitated area fraction were found to have a linear relationship with the strain for strains up to about 10%. The mean carbide diameter was observed to be a function of time at temperature. A small decrease in carbide density with strain was detected 12 refs, 28 figs, 6 tabs

Micro manometer and pitot tube for measuring the velocity distribution in a natural convection water stream between two vertical parallel plates (1961); Micromano metre et tube de pitot destines a l'exploration du profil de vitesse dans un ecoulement d'eau de convection naturelle entre deux plaques verticales paralleles (1961)

Energy Technology Data Exchange (ETDEWEB)

Santon, L; Vernier, Ph [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1961-07-01

For heat transfer studies in certain cases of cooling in swimming-pool type nuclear reactors, a knowledge of the distribution of the velocities between two heating elements is of prime importance. A Pitot tube and a micro-manometer have been developed for making these measurements on an experimental model. (authors) [French] Pour l'etude du transfert de chaleur dans certains cas de refroidissement des reacteurs nucleaires du type piscine, la connaissance de la repartition des vitesses entre deux elements chauffants est primordiale. On a mis au point un tube de Pitot et un micromanometre pour effectuer ces mesures sur une maquette experimentale. (auteurs)

Creep properties of a thermally grown alumina

Energy Technology Data Exchange (ETDEWEB)

Kang, K.J. [Department of Mechanical Engineering, Chonnam National University, Kwangju 500-757 (Korea, Republic of)], E-mail: kjkang@chonnam.ac.kr; Mercer, C. [Materials Department, University of California, Santa Barbara, CA 93106-5050 (United States)

2008-04-15

A unique test system has been developed to measure creep properties of actual thermally grown oxides (TGO) formed on a metal foil. The thickness of TGO, load and displacement can be monitored in situ at high temperature. Two batches of FeCrAlY alloys which differ from each other in contents of yttrium and titanium were selected as the {alpha}-Al{sub 2}O{sub 3} TGO forming materials. The creep tests were performed on {alpha}-Al{sub 2}O{sub 3} of thickness 1-4 {mu}m, thermally grown at 1200 deg. C in air. The strength of the substrate was found to be negligible, provided that the TGO and substrate thickness satisfy: h{sub TGO} > 1 {mu}m and H{sub sub} {<=} 400 {mu}m. The steady-state creep results for all four TGO thicknesses obtained on batch I reside within a narrow range, characterized by a parabolic creep relation. It is nevertheless clear that the steady-state creep rates vary with TGO thickness: decreasing as the thickness increases. For batch II, the steady-state creep rates are higher and now influenced more significantly by TGO thickness. In comparison with previous results of the creep properties for bulk polycrystalline {alpha}-Al{sub 2}O{sub 3} at a grain size of {approx}2 {mu}m, the creep rates for the TGO were apparently higher, but both were significantly affected by yttrium content. The higher creep rate and dependency on the TGO thickness led to a hypothesis that the deformation of the TGO under tensile stress at high temperature was not a result of typical creep mechanisms such as diffusion of vacancies or intra-granular motion of dislocations, but a result of inter-grain growth of TGO. Results also indicate that the amount of yttrium may influence the growth strain as well as the creep rate.

Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing

International Nuclear Information System (INIS)

Kawasaki, Megumi; Beyerlein, Irene J.; Vogel, Sven C.; Langdon, Terence G.

2008-01-01

High-purity aluminum was processed by equal-channel angular pressing (ECAP) and then tested under creep conditions at 473 K. The results show conventional power-law creep with a stress exponent of n = 5 which is consistent with an intragranular dislocation process involving the glide and climb of dislocations. It is demonstrated that diffusion creep is not important in these tests because the ultrafine grains produced by ECAP are not stable at this temperature. Texture measurements were undertaken using the high-pressure preferred orientation neutron time-of-flight diffractometer and they reveal significant differences in the evolution of texture during creep in pressed and unpressed specimens. These experimental measurements of texture are in excellent agreement with theoretical textures predicted using a visco-plastic self-consistent model that limits deformation to plastic slip. The calculations provide additional confirmation that creep occurs through an intragranular dislocation process

Creep fatigue assessment for EUROFER components

Energy Technology Data Exchange (ETDEWEB)

Özkan, Furkan, E-mail: oezkan.furkan@partner.kit.edu; Aktaa, Jarir

2015-11-15

Highlights: • Design rules for creep fatigue assessment are developed to EUROFER components. • Creep fatigue assessment tool is developed in FORTRAN code with coupling MAPDL. • Durability of the HCPB-TBM design is discussed under typical fusion reactor loads. - Abstract: Creep-fatigue of test blanket module (TBM) components built from EUROFER is evaluated based on the elastic analysis approach in ASME Boiler Pressure Vessel Code (BPVC). The required allowable number of cycles design fatigue curve and stress-to-rupture curve to estimate the creep-fatigue damage are used from the literature. Local stress, strain and temperature inputs for the analysis of creep-fatigue damage are delivered by the finite element code ANSYS utilizing the Mechanical ANSYS Parametric Design Language (MAPDL). A developed external FORTRAN code used as a post processor is coupled with MAPDL. Influences of different pulse durations (hold-times) and irradiation on creep-fatigue damage for the preliminary design of the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) are discussed for the First Wall component of the TBM box.

Review of recent irradiation-creep results

International Nuclear Information System (INIS)

Coghlan, W.A.

1982-05-01

Materials deform faster under stress in the presence of irradiation by a process known as irradiation creep. This phenomenon is important to reactor design and has been the subject of a large number of experimental and theoretical investigations. The purpose of this work is to review the recent experimental results to obtain a summary of these results and to determine those research areas that require additional information. The investigations have been classified into four subgroups based on the different experimental methods used. These four are: (1) irradiation creep using stress relaxation methods, (2) creep measurements using pressurized tubes, (3) irradiation creep from constant applied load, and (4) irradiation creep experiments using accelerated particles. The similarity and the differences of the results from these methods are discussed and a summary of important results and suggested areas for research is presented. In brief, the important results relate to the dependence of creep on swelling, temperature, stress state and alloying additions. In each of these areas new results have been presented and new questions have arisen which require further research to answer. 65 references

Factors influencing creep model equation selection

International Nuclear Information System (INIS)

Holdsworth, S.R.; Askins, M.; Baker, A.; Gariboldi, E.; Holmstroem, S.; Klenk, A.; Ringel, M.; Merckling, G.; Sandstrom, R.; Schwienheer, M.; Spigarelli, S.

2008-01-01

During the course of the EU-funded Advanced-Creep Thematic Network, ECCC-WG1 reviewed the applicability and effectiveness of a range of model equations to represent the accumulation of creep strain in various engineering alloys. In addition to considering the experience of network members, the ability of several models to describe the deformation characteristics of large single and multi-cast collations of ε(t,T,σ) creep curves have been evaluated in an intensive assessment inter-comparison activity involving three steels, 21/4 CrMo (P22), 9CrMoVNb (Steel-91) and 18Cr13NiMo (Type-316). The choice of the most appropriate creep model equation for a given application depends not only on the high-temperature deformation characteristics of the material under consideration, but also on the characteristics of the dataset, the number of casts for which creep curves are available and on the strain regime for which an analytical representation is required. The paper focuses on the factors which can influence creep model selection and model-fitting approach for multi-source, multi-cast datasets

A Model for Creep and Creep Damage in the γ-Titanium Aluminide Ti-45Al-2Mn-2Nb.

Science.gov (United States)

Harrison, William; Abdallah, Zakaria; Whittaker, Mark

2014-03-14

Gamma titanium aluminides (γ-TiAl) display significantly improved high temperature mechanical properties over conventional titanium alloys. Due to their low densities, these alloys are increasingly becoming strong candidates to replace nickel-base superalloys in future gas turbine aeroengine components. To determine the safe operating life of such components, a good understanding of their creep properties is essential. Of particular importance to gas turbine component design is the ability to accurately predict the rate of accumulation of creep strain to ensure that excessive deformation does not occur during the component's service life and to quantify the effects of creep on fatigue life. The theta (θ) projection technique is an illustrative example of a creep curve method which has, in this paper, been utilised to accurately represent the creep behaviour of the γ-TiAl alloy Ti -45Al-2Mn-2Nb. Furthermore, a continuum damage approach based on the θ-projection method has also been used to represent tertiary creep damage and accurately predict creep rupture.

High temperature high vacuum creep testing facilities

International Nuclear Information System (INIS)

Matta, M.K.

1985-01-01

Creep is the term used to describe time-dependent plastic flow of metals under conditions of constant load or stress at constant high temperature. Creep has an important considerations for materials operating under stresses at high temperatures for long time such as cladding materials, pressure vessels, steam turbines, boilers,...etc. These two creep machines measures the creep of materials and alloys at high temperature under high vacuum at constant stress. By the two chart recorders attached to the system one could register time and temperature versus strain during the test . This report consists of three chapters, chapter I is the introduction, chapter II is the technical description of the creep machines while chapter III discuss some experimental data on the creep behaviour. Of helium implanted stainless steel. 13 fig., 3 tab

Creep of plain weave polymer matrix composites

Science.gov (United States)

Gupta, Abhishek

Polymer matrix composites are increasingly used in various industrial sectors to reduce structural weight and improve performance. Woven (also known as textile) composites are one class of polymer matrix composites with increasing market share mostly due to their lightweight, their flexibility to form into desired shape, their mechanical properties and toughness. Due to the viscoelasticity of the polymer matrix, time-dependent degradation in modulus (creep) and strength (creep rupture) are two of the major mechanical properties required by engineers to design a structure reliably when using these materials. Unfortunately, creep and creep rupture of woven composites have received little attention by the research community and thus, there is a dire need to generate additional knowledge and prediction models, given the increasing market share of woven composites in load bearing structural applications. Currently, available creep models are limited in scope and have not been validated for any loading orientation and time period beyond the experimental time window. In this thesis, an analytical creep model, namely the Modified Equivalent Laminate Model (MELM), was developed to predict tensile creep of plain weave composites for any orientation of the load with respect to the orientation of the fill and warp fibers, using creep of unidirectional composites. The ability of the model to predict creep for any orientation of the load is a "first" in this area. The model was validated using an extensive experimental involving the tensile creep of plain weave composites under varying loading orientation and service conditions. Plain weave epoxy (F263)/ carbon fiber (T300) composite, currently used in aerospace applications, was procured as fabrics from Hexcel Corporation. Creep tests were conducted under two loading conditions: on-axis loading (0°) and off-axis loading (45°). Constant load creep, in the temperature range of 80-240°C and stress range of 1-70% UTS of the

Analysis of Simple Creep Stress Calculation Methods for Creep Life Assessment

Energy Technology Data Exchange (ETDEWEB)

Seo, Jun Min; Lee, Han Sang; Kim, Yun Jae [Korea Univ., Daejeon (Korea, Republic of)

2017-08-15

Creep analysis takes much more time than elastic or elastic-plastic analysis. In this study, we conducted elastic and elastic-plastic analysis and compared the results with creep analysis results. In the elastic analysis, we used primary stress, which can be classified by the Mα-tangent method and stress intensities recommended in the ASME code. In the elastic-plastic analysis, we calculated the parameters recommended in the R5 code. For the FE models, a bending load, uniaxial load, and biaxial load were applied to the cross shaped welded plate, and a bending load and internal pressure were applied to the elbow pipe. To investigate the element size sensitivity, we conducted FE analysis for various element sizes for the cases where bending load was applied to the cross shaped welded plate. There was no significant difference between the creep.

Numerical algorithms in secondary creep

International Nuclear Information System (INIS)

Feijoo, R.A.; Taroco, E.

1980-01-01

The problem of stationary creep is presented as well as its variational formulation, when weak constraints are established, capable of assuring one single solution. A second, so-called elasto-creep problem, is further analysed, together with its variational formulation. It is shown that its stationary solution coincides with that of the stationary creep and the advantages of this formulation with respect to the former one is emphasized. Some numerical applications showing the efficiency of the method propesed are finally presented [pt

Preliminary studies on the closed cycle magneto aerodynamic converter; Etudes preliminaires sur les convertisseurs magnetohydrodynamiques fonctionnant hors d'equilibre thermodynamique

Energy Technology Data Exchange (ETDEWEB)

Ricateau, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

electron heating in argon-potassium can be achieved by magnetic fields from 1 to 2 Ts. Plans are being made to build an important facility which will work on the principle of hot shots. The gas generator will deliver cesium-seeded helium shots at a temperature of 2100 deg. K. The shot will last 1/ 10 s and the instantaneous thermal power will reach 1 MW. (author) [French] A cote des convertisseurs magnetoaerodynamiques a cycle ouvert qui transforment l'energie thermique contenue dans les gaz de combustion on etudie tres attentivement le convertisseur a cycle ferme qui peut tirer son energie de toute source de chaleur a haute temperature et tout particulierement des sources nucleaires. Avant une etude pratique de l'ensemble de la centrale les performances du convertisseur lui-meme doivent etre bien delimitees. Ces performances sont largement fonction de la conductivite du gaz utilise. Mais cette conductivite ne doit pas etre payee par une temperature techniquement inadmissible pour l'echangeur de chaleur. Dans le fluide de conversion on est amene a associer un gaz porteur, helium ou argon, et une semence facilement ionisable cesium ou potassium. L'ionisation purement thermique n'est efficace qu'a partir de 2500 deg. K, par contre le champ electrique developpe par induction dans le convertisseur peut, sous certaines conditions, accroitre la temperature electronique et developper une ionisation bien superieure a la valeur d'equilibre. Il devient alors possible d'ioniser le gaz a temperature moderee. Des travaux en cours ont pour but de preciser les conditions permettant de creer cette ionisation hors d'equilibre dans les gaz rares ensemenses. Des mesures ont ete faites a l'aide d'un plasmatron triphase do 500 kVA alimente a l'argon ensemence de potassium. On a fait debiter cet appareil dans une cellule permettant de mesurer les composantes tensorielles de la conductivite en presence de champ magnetique. Les valeurs trouvees dans les conditions d'equilibre thermodynamique

Development of an apparatus for measuring the thermal conductivity of irradiated or non-irradiated graphite; Realisation d'un appareil de mesure de la conductibilite thermique du graphite irradie ou non irradie

Energy Technology Data Exchange (ETDEWEB)

Bocquet, M; Micaud, G

1962-07-01

An apparatus was developed for measuring the thermal conductivity coefficient K of irradiated or non-irradiated graphite. The measurement of K at around room temperature with an accuracy of about 6% is possible. The study specimen is placed in a vacuum between a hot and a cold source which create a temperature gradient {delta}{theta}/ {delta}x in the steady state. The amount of heat transferred, Q, is deduced from the electrical power dissipated at the hot source, after allowing for heat losses. The thermal conductivity coefficient is defined as: K = Q/S. {delta}x/{delta}{theta}, S being the cross section of the sample. Systematic studies have made it possible to determine the mean values of the thermal conductivity. (authors) [French] Un appareil de mesure du coefficient de conductibilite thermique K du graphite irradie ou non irradie a ete realise. Utilisant le principe du transfert de chaleur, il permet de mesurer K au voisinage de la temperature ambiante avec une precision de 6 pour cent environ. L'echantillon de graphite etudie est place sous vide entre une source chaude et une source froide qui creent en regime permanent un gradient de temperature {delta}{theta}/{delta}x La quantite de chaleur transferee Q est deduite de la puissance electrique dissipee dans la source chaude en deduisant les pertes thermiques. Le coefficient de conductibilite thermique est defini par: K = Q/S. {delta}x/{delta}{theta} S designant la section de l'echantillon. Des etudes systematiques ont permis de determiner pour differents graphites non irradies les valeurs moyennes des coefficients de conductibilite thermique. Ces etudes ont mis en evidence pour un type de graphite donne, l'influence de la densite apparente sur le coefficient de conductibilite thermique. A partir de mesures effectuees sur des echantillons de graphite irradies preleves par carottage dans les empilements des reacteurs a moderateur de graphite les variations du rapport K0/Ki en fonction de la dose et de la

Contribution to the study of recoil species produced by potassium ferrocyanide neutron irradiation; Contribution a l'etude de la reactivite des especes de recul dans le ferrocyanure de potassium irradie aux neutrons thermiques

Energy Technology Data Exchange (ETDEWEB)

Meriadec Vernier de Byans, B. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-04-01

The chemical species produced by potassium ferrocyanide neutron irradiation were separated and identified. The study of their behaviour upon thermal annealing has allowed to establish a scheme of reaction as well as a kinetic treatment of the data. Activation energies are determined in different conditions and the effects of radiation dose, oxygen and water of crystallisation upon the activation energies were studied. Preliminary E.S.R. data and its relevance to the decomposition process is also discussed. (authors) [French] On a separe et identifie les differentes especes chimiques produites par irradiation neutronique de ferrocyanure de potassium. L'etude de leur comportement au cours du recuit thermique a permis l'application de differentes cinetiques et l'etablissement d'un schema de reaction. On a deterrmine la valeur des energies d'activation dans differentes conditions de recuit ainsi que l'influence de la dose de radiations, de l'oxygene et de l'eau de cristallisation sur ces energies. Une serie de mesures de resonance paramagnetique electronique a complete cette etude. (auteurs)

ETUDES ANALYTIQUES : Détection des OGM : du libre choix des consommateurs aux études de biovigilance

Directory of Open Access Journals (Sweden)

Bertheau Yves

2000-07-01

Full Text Available Les récentes affaires de semences conventionnelles de colza et de maïs contaminées par des traces d’OGM ont à nouveau, s’il en était besoin, rappelé à notre bon souvenir les besoins en méthodes de détection et d’identification des OGM fiables et sensibles. Les développements se poursuivent, certes bien plus lentement qu’initialement espéré du fait du nombre important de facteurs à maîtriser et du caractère relativement inédit de ce travail. Concernant des matrices alimentaires variées, cette détection se heurte au manque de recul dans plusieurs domaines tels que celui de l’extraction et la purification d’acides nucléiques en quantité et en qualité. Bien que développées pour satisfaire aux besoins réglementaires européens concernant l’alimentation humaine, ces méthodes devraient être aisément applicables dans d’autres domaines concernés par les OGM (étude des transferts de gènes par flux pollinique, éventuels transferts horizontaux, suivi des acides nucléiques lors de l’ingestion.... Au-delà des OGM, les méthodes mises en œuvre devraient présenter un intérêt dans d’autres domaines comme la microbiologie, l’épidémiologie ou l’authentification des composants biologiques d’un produit.

Study and development of an optical method for the measurement of convection coefficients; Etude et developpement d'une methode optique pour la mesure du coefficient de convection

Energy Technology Data Exchange (ETDEWEB)

Crowther, David J.

1990-03-06

a la valeur du coefficient de convection. Sa determination est principalement basee sur l'utilisation des moments temporels d'ordre zero. Les resultats experimentaux obtenus par cette methode, sont compares a ceux donnes par un fluxmetre en regime permanent. L'etude montre que le coefficient de convection n'est pas constant pendant l'experience impulsionnelle, mais passe par un extremum avant de tendre vers une asymptote.

Approche de l’état podologique du patient diabétique hémodialysé chronique dans un centre hospitalier Marocain

OpenAIRE

Benabdellah, Nawal; Karimi, Ilham; Bentata, Yassamine; Haddiya, Intissar

2013-01-01

De plus en plus de patients diabétiques sont pris en charge en HDC. Les conséquences sont multiples, notamment les problèmes de pied diabétique qui demeurent mal connus du patient diabétique et des soignants ce qui retentit considérablement sur la qualité de prise en charge. Nous avons réalisé une Etude transversale en Novembre 2011 au centre d'hémodialyse de l'hôpital Al Farabi d'Oujda, incluant tous nos patients diabétiques HDC. Nous avons relevé les données démographiques, clinico-biologiq...

Crack Tip Creep Deformation Behavior in Transversely Isotropic Materials

International Nuclear Information System (INIS)

Ma, Young Wha; Yoon, Kee Bong

2009-01-01

Theoretical mechanics analysis and finite element simulation were performed to investigate creep deformation behavior at the crack tip of transversely isotropic materials under small scale creep (SCC) conditions. Mechanical behavior of material was assumed as an elastic-2 nd creep, which elastic modulus ( E ), Poisson's ratio (v ) and creep stress exponent ( n ) were isotropic and creep coefficient was only transversely isotropic. Based on the mechanics analysis for material behavior, a constitutive equation for transversely isotropic creep behavior was formulated and an equivalent creep coefficient was proposed under plain strain conditions. Creep deformation behavior at the crack tip was investigated through the finite element analysis. The results of the finite element analysis showed that creep deformation in transversely isotropic materials is dominant at the rear of the crack-tip. This result was more obvious when a load was applied to principal axis of anisotropy. Based on the results of the mechanics analysis and the finite element simulation, a corrected estimation scheme of the creep zone size was proposed in order to evaluate the creep deformation behavior at the crack tip of transversely isotropic creeping materials

Uranium deposits in the Nord-Limousin; Les gites d'uranium du Nord-Limousin

Energy Technology Data Exchange (ETDEWEB)

Sarcia, J A; Sarcia, J A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The authors briefly consider the region in its geographical and geological setting. They describe the main petrographic, metallogenic and tectonic characteristics of the sector investigated by the Atomic Energy Commission since 1947, stressing the form of uraniferous mineral deposits. This short account is intended as a general presentation of the detailed studies which will follow, of which that dealing with the mine Henriette is the first to be published. (author) [French] Les auteurs replacent rapidement la region dans son cadre geographique et geologique. Ils decrivent les principales caracteristiques petrographiques, metallogeniques et tectoniques du secteur etudie par le Commissariat a I'Energie atomique depuis 1947, en insistant sur le mode de gisement des mineralisations uraniferes. Ces quelques pages sont destinees a la presentation generale des etudes de detail qui suivront, dont celle qui concerne la Mine Henriette est la premiere publiee. (auteur)

Kinetic ion exchange studies in ultramarines by the radioactive tracer method; Etudes cinetiques d'echanges d'ions dans les outremers par la technique des traceurs radioactifs

Energy Technology Data Exchange (ETDEWEB)

May, S; Goenvec, H; Pinte, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

The possibility of ion exchanges in various ultramarines has been studied in the aqueous phase. The kinetics of the exchange reactions is followed by studying the behaviour of a radioactive ion, either in the solution of the exchanging salt or in the ultramarine itself. The sodium in the make-up of the ultramarine, is found to exchange with various ions in solution. The reaction speeds appear to be governed by a diffusion process inside the grains of ultramarine. The diffusion coefficients and the activation energies are determined for the exchanges studied. Several exchange studies were carried out in an organic medium. The kinetics of ion exchange is also investigated in ultramarines from which most of the constituent sulphur has been eliminated. The results obtained in these ultramarines are compared with the exchange kinetics of the same ions in ordinary ultramarine. (author) [French] Nous avons etudie la possibilite d'echanges ioniques dans differents outremers, en phase aqueuse. L'etude cinetique des reactions d'echanges est suivie en etudiant le comportement d'ion radioactif, soit dans la solution du sel echangeant, soit dans l'outremer lui-meme. C'est le sodium de constitution de l'outremer qui s'echange avec differents ions en solution. Les vitesses de reactions semblent etre controlees par un processus de diffusion a l'interieur des grains d'outremer. Les coefficients de diffusion et les energies d'activation sont determines pour les echanges etudies. Quelques etudes sont realisees en milieu organique ou quelques echanges ont ete etudies. La cinetique d'echange d'ions est egalement etudie dans des outremers dans lesquels la majorite du soufre de constitution a ete eliminee. On compare les resultats obtenus dans ces outremers avec les cinetiques d'echanges des memes ions dans l'outremer ordinaire. (auteur)

Contribution to the study of samarium-151 excited levels; Contribution a l'etude des niveaux excites du samarium-151

Energy Technology Data Exchange (ETDEWEB)

Locard, P [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

1967-07-01

The nucleus of {sup 151}Sm, which has 89 neutrons, happens to be on the lower edge of the deformed nuclei of region II. Therefore, the study of its levels is very interesting for the verification of the goodness of the collective models for deformed nuclei when the deformation is small (we introduce these models in the first chapter). {sup 151}Sm has often been studied, but the direct gamma spectrum measured with a lithium drift-germanium detector (chapter 3) shows many high energy transitions which did not appear in the previous level schemes. In order to settle these transitions, we have undertaken gamma-gamma coincidence spectra (as well as sum-coincidence spectra) experiments with a scintillation spectrometer designed in our laboratory (chapter 2). The investigation of the intensities of these coincidences leads us to modify the last proposed level schemes: we suppress the levels at 405,5 and 650 keV, we add levels at 245,6 - 306,6 - 522 - 952 and 962 keV. We have also verified the multipolarities of the main transitions and measured the half-lives of a few levels (chapter 3) (we find a half-life of 1.1 {+-} 0.5 nanosecond for the level at 167,7 keV). In chapter 4, we compare our results to the predictions of the models described in chapter 1. (author) [French] Le noyau de {sup 151}Sm, qui possede 89 neutrons, se trouve a la limite inferieure des noyaux deformes de la region II. L'etude de ses niveaux excites est donc d'un interet tout particulier pour la verification de la validite des differents modeles collectifs pour les noyaux deformes, lorsque la deformation est petite (nous introduisons ces modeles dans un premier chapitre). Le {sup 151}Sm a deja fait l'objet de nombreuses etudes, mais le spectre gamma direct fait avec une jonction de germanium compense au lithium (chapitre 3), nous a montre l'existence d'un grand nombre de transitions de hautes energies qui ne sont pas placees dans les schemas proposes jusqu'a ce jour. Pour preciser la place de ces

Model for transient creep of southeastern New Mexico rock salt

International Nuclear Information System (INIS)

Herrmann, W.; Wawersik, W.R.; Lauson, H.S.

1980-11-01

In a previous analysis, existing experimental data pertaining to creep tests on rock salt from the Salado formation of S.E. New Mexico were fitted to an exponential transient creep law. While very early time portions of creep strain histories were not fitted very well for tests at low temperatures and stresses, initial creep rates in particular generally being underestimated, the exponential creep law has the property that the transient creep strain approaches a finite limit with time, and is therefore desirable from a creep modelling point of view. In this report, an analysis of transient creep is made. It is found that exponential transient creep can be related to steady-state creep through a universal creep curve. The resultant description is convenient for creep analyses where very early time behavior is not important

Study on the creep constitutive equation of Hastelloy X, (1)

International Nuclear Information System (INIS)

Hada, Kazuhiko; Mutoh, Yasushi

1983-01-01

A creep constitutive equation of Hastelloy X was obtained from available experimental data. A sensitivity analysis of this creep constitutive equation was carried out. As the result, the following were revealed: (i) Variations in creep behavior with creep constitutive equation are not small. (ii) In a simpler stress change pattern, variations in creep behavior are similar to those in the corresponding fundamental creep characteristics (creep strain curve, stress relaxation curve, etc.). (iii) Cumulative creep damage estimated in accordance with ASME Boiler and Pressure Vessel Code Case N-47 from a stress history predicted by ''the standard creep constitutive equation'' which predicts the average behavior of creep strain curve data is not thought to be on the safe side on account of uncertainties in creep damage caused by variations in creep strain curve. (author)

Creep resistant high temperature martensitic steel

Energy Technology Data Exchange (ETDEWEB)

Hawk, Jeffrey A.; Jablonski, Paul D.; Cowen, Christopher J.

2017-01-31

The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, copper, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

Creep resistant high temperature martensitic steel

Science.gov (United States)

Hawk, Jeffrey A.; Jablonski, Paul D.; Cowen, Christopher J.

2015-11-13

The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6 carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

Creep and creep rupture properties of cladding tube (type 316) in high temperature sodium

International Nuclear Information System (INIS)

Atsumo, H.

1977-01-01

The thin walled small sized seamless AISI 316 steel tubes, which are designated to be domestically used as the fuel cladding tube for sodium cooled fast breeder reactors in Japan, are irradiated in the following sodium of high temperature in the range of 370 deg. C to 700 deg. C, and receive gradually increased internal pressure caused by the fission produced gas generating from the nuclear fuel burn-up inside the cladding tube. Consequently, the creep behavior of fuel cladding tubes under a high temperature sodium environment is an important problem which must be determined and clarified together with their characteristic features under irradiation and in air. In relation to the creep performance of fuel cladding tubes made of AISI 316 steel and other comparable austenitic stainless steels, hardly any studies are found that are made systematically to examine the effect of sodium with sodium purity as parameter or any comparative studies with in-air data at various different temperatures. The present research work was aimed to obtain certain basic design data relating to in-sodium creep performance of the domestic made fuel cladding tubes for fast breeder reactors, and also to gain further date as considered necessary under several sodium conditions. That is, together with establishment of the technology for tensile creep test and internal pressure creep rupture test in flowing sodium of high temperature, a series of tests and studies were performed on the trial made cladding tubes of AISI Type-316 steel. In the first place, two kinds of purity conditions of sodium, close to the actual reactor-operating condition, (oxygen concentration of 10 ppm and 5 ppm respectively) were established, and then uniaxial tensile creep test and rupture test under various temperatures were performed and the resulting data were compared and evaluated against the in-air data. Then, secondly, an internal pressure creep rupture test was conducted under a single purity sodium environment

A method of creep damage summation based on accumulated strain for the assessment of creep-fatigue endurance

International Nuclear Information System (INIS)

Hales, R.

1983-01-01

A method of combining long term creep data with relatively short term mechanical behaviour to provide an estimate of creep-fatigue endurance is presented. It is proposed that the creep-fatigue effect in high temperature cyclic deformation is governed by a difference in strain rate around the cycle and the associated variation in ductility with strain rate. (author)

Creep rupture behavior of unidirectional advanced composites

Science.gov (United States)

Yeow, Y. T.

1980-01-01

A 'material modeling' methodology for predicting the creep rupture behavior of unidirectional advanced composites is proposed. In this approach the parameters (obtained from short-term tests) required to make the predictions are the three principal creep compliance master curves and their corresponding quasi-static strengths tested at room temperature (22 C). Using these parameters in conjunction with a failure criterion, creep rupture envelopes can be generated for any combination of in-plane loading conditions and ambient temperature. The analysis was validated experimentally for one composite system, the T300/934 graphite-epoxy system. This was done by performing short-term creep tests (to generate the principal creep compliance master curves with the time-temperature superposition principle) and relatively long-term creep rupture tensile tests of off-axis specimens at 180 C. Good to reasonable agreement between experimental and analytical results is observed.

Study of FeC1{sub 2} by neutron diffraction; Etude de Fe C1{sub 2} par diffraction de neutrons

Energy Technology Data Exchange (ETDEWEB)

Herpin, A; Meriel, P [Commissariat a l' Energie Atomique, Saclay (France)

1959-07-01

Magnetic measurements have shown that anhydrous ferrous chloride behaves as a metamagnetic at temperatures below 24 deg. K, in other words as an antiferromagnetic sensitive to the action of an external field of moderate strength. The aim of the neutron diffraction study is to determine precisely the arrangement of the magnetic moments, and to follow its evolution as a function of the applied field. (author) [French] Des mesures magnetiques ont montre que le chlorure ferreux anhydre se comporte comme un metamagnetique a une temperature inferieure a 24 deg. K, c'est a dire comme un antiferromagnetique sensible a l'action d'un champ exterieur modere. L'etude par diffraction de neutrons a pour buts de preciser la disposition des moments magnetiques et de suivre son evolution en fonction du champ applique. (auteur)

Creep Properties of Walikukun (Schouthenia ovata Timber Beams

Directory of Open Access Journals (Sweden)

Ali Awaludin

2016-09-01

Full Text Available This study presents an evaluation of creep constants of Walikukun (Schoutheniaovata timber beams when rheological model of four solid elements, which is obtained byassembling Kelvin and Maxwell bodies in parallel configuration, was adopted. Creep behaviorobtained by this method was further discussed and compared with creep behavior developedusing phenomenological model of the previous study. Creep data of previous study was deformationmeasurement of Walikukun beams having cross-section of 15 mm by 20 mm with a clearspan of 550 mm loaded for three weeks period under two different room conditions: with andwithout Air Conditioner. Creep behavior given by both four solid elements model and phenomenological(in this case are power functions had good agreement during the period of creepmeasurement, but they give different prediction of creep factor beyond this period. The powerfunction of phenomenological model could give a reasonable creep prediction, while for the foursolid elements model a necessary modification is required to adjust its long-term creep behavior.

Creep behaviour of heat resistant steels. Pt. 2

International Nuclear Information System (INIS)

Kloos, K.H.; Granacher, J.; Oehl, M.

1993-01-01

Creep data scatter bands of steels 2.25 Cr-1 Mo and 12 Cr-1 Mo-0.3 V were evaluated with the aid of model functions based on time temperature parameters. From the times to reach given strain values, mean isostrain curves in the stress time diagramme were calculated and therefrom, mean creep curves were derived. On this basis, creep equations were established, which include primary-, secondary- and tertiary-creep and are valid in the main range of application of each steel. Further, mean stress strain curves from hot tensile tests were used to describe the initial plastic strain in the creep equations. The values calculated with the established creep equations agreed relatively well with the correspondent original scatter band values from the creep tests. (orig.) [de

Etude de la structure interne du nucleon en diffusion profondement inelastique de muons sur cibles fixes.

CERN Document Server

Granier, Thierry

Dans ce mémoire est présentée l'analyse, dans le but de l'extraction des fonctions de structure, d'une partie des données de diffusion profondément inélastique de muons sur cibles fixes d'hydrogène et de detérium obtenues dans l'expérience NMC (New Muon Collaboration) du CERN. Les fonctions de structure, à partir desquelles s'exprime la probabilité de diffusion à un certain angle et une certaine énergie, contiennent de l'information sur la structure interne du nucléon, plus précisément sur la distribution en énergie des quarks à l'intérieur de celui-ci. L'étude de la variation des fonctions de structure avec le degré d'inélasticité de la diffusion permet de tester la validité de la chromodynamique quantique, la théorie de jauge des interactions fortes

Understanding effects of microstructural inhomogeneity on creep response – New approaches to improve the creep resistance in magnesium alloys

Directory of Open Access Journals (Sweden)

Yuanding Huang

2014-06-01

Full Text Available Previous investigations indicate that the creep resistance of magnesium alloys is proportional to the stability of precipitated intermetallic phases at grain boundaries. These stable intermetallic phases were considered to be effective to suppress the deformation by grain boundary sliding, leading to the improvement of creep properties. Based on this point, adding the alloying elements to form the stable intermetallics with high melting point became a popular way to develop the new creep resistant magnesium alloys. The present investigation, however, shows that the creep properties of binary Mg–Sn alloy are still poor even though the addition of Sn possibly results in the precipitation of thermal stable Mg2Sn at grain boundaries. That means other possible mechanisms function to affect the creep response. It is finally found that the poor creep resistance is attributed to the segregation of Sn at dendritic and grain boundaries. Based on this observation, new approaches to improve the creep resistance are suggested for magnesium alloys because most currently magnesium alloys have the commonality with the Mg–Sn alloys.

F{sup 19} relaxation in non-magnetic hexafluorides; Contribution a l'etude de la relaxation des fluors dans les hexafluorures non magnetiques

Energy Technology Data Exchange (ETDEWEB)

Rigny, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-12-01

The interesting properties of the fluorine magnetic resonance in the hexafluorides of molybdenum, tungsten and uranium, are very much due to large anisotropies of the chemical shift tensors. In the solid phases these anisotropies, the values of which are deduced from line shape studies, allow one to show that the molecules undergo hindered rotations about the metal atom. The temperature and frequency dependence of the fluorine longitudinal relaxation times shows that the relaxation is due to the molecular motion. The dynamical parameters of this motion are then deduced from the complete study of the fluorine relaxation in the rotating frame. In the liquid phases, the existence of anisotropies allows an estimation of the different contributions to the relaxation. In particular, the frequency and temperature dependence of the relaxation shows it to be dominated by the spin-rotation interaction. We have shown that the strength of this interaction can be deduced from the chemical shifts, and the angle through which the molecule rotates quasi-freely can be determined. In the hexafluorides, this angle is roughly one radian at 70 C, and with the help of this value, the friction coefficients which describe the intermolecular interactions are discussed. (author) [French] Les proprietes de la resonance magnetique des fluors dans les hexafluorures de molybdene, tungstene et uranium sont influencees par l'existence de deplacements chimiques tres anisotropes. Dans les phases solides, la valeur de cette anisotropie peut etre determinee par l'analyse des formes de raies et son existence permet de montrer que les molecules sont en rotation empechee autour de leur atome central. L'etude du temps de relaxation longitudinal en fonction de la temperature et de la frequence montre que la relaxation est due aux mouvements moleculaires, aux plus hautes temperatures. Les proprietes dynamiques du mouvement sont obtenues par l'etude complete de la relaxation spin-reseau dans le referentiel

Life assessment of Mod.9Cr-1Mo steel. Quantitative evaluation of microstructural damage in creep interrupted specimens and in creep-fatigue specimens

International Nuclear Information System (INIS)

Maruyama, Kouichi; Kato, Syoichi; Nagae, Yuji

1999-02-01

Boiler and steam turbine components in power generating plants are used under creep and creep-fatigue conditions. It is important to measure both creep and creep-fatigue damage of the components in order to assess the residual life of the components. Modified 9Cr-1Mo steel, a candidate material for steam generator in FBR, has a tempered martensitic lath structure. It was proposed in the second report that lath width in the lath structure is closely related to creep strain, and using this relation one can assess residual creep life of a structural component made of the steel. The objectives of this study are to investigate the change of the lath structure during creep.fatigue deformation, and to estimate creep strain by measuring area of cell composing the lath structure. The area of cell can be a better measure of creep deformation than the lath width. The lath structure is covered during creep-fatigue deformation. The lath structure becomes equiaxed cell structure under creep-fatigue more quickly compared with the lath structure recovered during creep. The lath structure recovered under creep-fatigue has a stationary value of the lath width determined by maximum stress at Nf/2. (Nf: number of cycles) If the recovery process of the lath structure can be investigated under creep-fatigue, the lath width can be a measure of the life assessment under creep-fatigue. Area of cell composing the lath structure increases with creep deformation and reaches a stationary value S s determined by creep stress. The rate of increase in the area is faster at a higher stress and temperature. A normalized change in the area of cell, ΔS/ΔS s , was introduced as a measure of the recovery process of martensitic lath structure. ΔS is the change in area of cell from the initial value S 0 , ΔS s is the difference between S s and S 0 . ΔS/ΔS s is uniquely related to creep strain independent of creep conditions. However, the scatter of data in ΔS/ΔS s -strain relation is wider than

Irradiation creep in simple binary alloys

International Nuclear Information System (INIS)

Nagakawa, J.; Sethi, V.K.; Turner, A.P.L.

1981-07-01

Creep enhancement during 21-MeV deuteron irradiation was examined at 350 0 C for two simple binary alloys with representative microstructures, i.e., solid-solution (Ni - 4 at. % Si) and precipitation-hardened (Ni - 12.8 at. % Al) alloys. Coherent precipitates were found to be very effective in suppressing irradiation-enhanced creep. Si solute atoms depressed irradiation creep moderately and caused irradiation hardening via radiation-induced segregation. The stress-dependence of irradiation creep in Ni - 4 at. % Si should a transition, which seems to reflect a change of mechanism from dislocation climb due to stress-induced preferential absorption (SIPA) to climb-controlled dislocation glide enhanced by irradiation

Loading History Effect on Creep Deformation of Rock

Directory of Open Access Journals (Sweden)

Wendong Yang

2018-06-01

Full Text Available The creep characteristics of rocks are very important for assessing the long-term stability of rock engineering structures. Two loading methods are commonly used in creep tests: single-step loading and multi-step loading. The multi-step loading method avoids the discrete influence of rock specimens on creep deformation and is relatively time-efficient. It has been widely accepted by researchers in the area of creep testing. However, in the process of multi-step loading, later deformation is affected by earlier loading. This is a key problem in considering the effects of loading history. Therefore, we intend to analyze the deformation laws of rock under multi-step loading and propose a method to correct the disturbance of the preceding load. Based on multi-step loading creep tests, the memory effect of creep deformation caused by loading history is discussed in this paper. A time-affected correction method for the creep strains under multi-step loading is proposed. From this correction method, the creep deformation under single-step loading can be estimated by the super-position of creeps obtained by the dissolution of a multistep creep. We compare the time-affected correction method to the coordinate translation method without considering loading history. The results show that the former results are more consistent with the experimental results. The coordinate translation method produces a large error which should be avoided.

Vertebral deformity arising from an accelerated "creep" mechanism.

Science.gov (United States)

Luo, Jin; Pollintine, Phillip; Gomm, Edward; Dolan, Patricia; Adams, Michael A

2012-09-01

Vertebral deformities often occur in patients who recall no trauma, and display no evident fracture on radiographs. We hypothesise that vertebral deformity can occur by a gradual creep mechanism which is accelerated following minor damage. "Creep" is continuous deformation under constant load. Forty-five thoracolumbar spine motion segments were tested from cadavers aged 42-92 years. Vertebral body areal BMD was measured using DXA. Specimens were compressed at 1 kN for 30 min, while creep in each vertebral body was measured using an optical MacReflex system. After 30 min recovery, each specimen was subjected to a controlled overload event which caused minor damage to one of its vertebrae. The creep test was then repeated. Vertebral body creep was measurable in specimens with BMD Creep was greater anteriorly than posteriorly (p creep by 800 % (anteriorly), 1,000 % (centrally) and 600 % (posteriorly). In 34 vertebrae with complete before-and-after data, anterior wedging occurring during the 1st creep test averaged 0.07° (STD 0.17°), and in the 2nd test (after minor damage) it averaged 0.79° (STD 1.03°). The increase was highly significant (P creep test was proportional to the severity of damage, as quantified by specimen height loss during the overload event (r (2) = 0.51, p creep to such an extent that it makes a substantial contribution to vertebral deformity.

Development of mercury porosimeter. Application to nuclear graphite studies (1961); Mise au point d'un porosimetre a mercure. Application a l'etude des graphites nucleaires (1961)

Energy Technology Data Exchange (ETDEWEB)

Bocquet, M; Genisson, J; Sailleau, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

A mercury porosimeter, model IFP-CEA, has been developed for application to nuclear graphite studies. The apparatus is based on the capillary depression phenomenon. The relationship between the radius of a pore and the pressure at which mercury fills it is pr = -2 {sigma} cos {theta} ( {sigma} is the surface tension, {theta} the angle of contact of the mercury). After some theoretical consideration, the apparatus is described. The mercury pressure is increased step-wise from 0 to 1000 kg/cm{sup 2} thus yielding the complete distribution of pores from 92 {mu} to 75 A. Results are, then presented concerning nuclear graphites which show the evolution of the porous structure under the effect of bitumen impregnation. In general, the volume of the large pores decreases while that of the small pores increases. The structure of impregnated products appears to depend to a certain extent on that of the starting materials. It has also been possible to study other products with this porosimeter; the range of measurements possible is such that it may be used for the study of the majority of porous materials. (authors) [French] Un porosimetre a mercure modele IFP-CEA a ete mis au point en vue de son application a l'etude de graphites nucleaires. Le fonctionnement de l'appareil repose sur le phenomene de depression capillaire. On etablit la relation existant entre le rayon r d'un pore et la pression p pour laquelle le mercure peut y penetrer: pr = -2 {sigma} cos {theta} ( {sigma} tension superficielle, {theta} angle de contact du mercure). Apres quelques considerations theoriques, l'appareil utilise est decrit. Il permet de faire varier par palier la pression du mercure entre 0 et 1000 kg/cm{sup 2} et d'etablir ainsi la distribution complete des rayons de pores compris entre 92 {mu} et 75 A. Les resultats d'une etude faite sur des graphites nucleaires sont alors presentes faisant apparaitre l'evolution de la structure poreuse sous l'effet des impregnations au brai. D'une facon

Creep and relaxation behavior of Inconel-617

International Nuclear Information System (INIS)

Osthoff, W.; Ennis, P.J.; Nickel, H.; Schuster, H.

1984-01-01

The static and dynamic creep behavior of Inconel alloy 617 has been determined in constant load creep tests, relaxation tests, and stress reduction tests in the temperature range 1023 to 1273 K. The results have been interpreted using the internal stress concept: The dependence of the internal stress on the applied stress and test temperature was determined. In a few experiments, the influence of cold deformation prior to the creep test on the magnitude of the internal stress was also investigated. It was found that the experimentally observed relaxation behavior could be more satisfactorily described using the Norton creep equation modified by incorporation of the internal stress than by the conventional Norton creep equation

Documentation for the viscoplastic and creep program

DEFF Research Database (Denmark)

Bellini, Anna

2004-01-01

of this workpackage is to simulate creep behavior of aluminum cast samples subjected to high temperature. In this document a two-state variables unified model is applied in order to simulate creep behavior and time-dependent metallurgical changes. The fundamental assumption of the unified theory is that creep...... is run using the material data obtained through the mentioned experimental study. The results obtained for the simulation of tensile tests and of creep tests are compared with experimental curves, showing a good agreement. Moreover, the document describes the results obtained during the first...... is quite stable and convergence can be reached also with big time steps. Keywords: Viscoplasticity, creep, unified constitutive model, aluminum, high temperature....

Contribution to the study of deformed heavy nuclei by means of nuclear reactions; Contribution a l'etude des noyaux lourds deformes au moyen de reactions nucleaires

Energy Technology Data Exchange (ETDEWEB)

Gastebois, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-06-01

The experimental results obtained in the study of the (d,p) reactions, at E{sub d} = 12 MeV, on the three even-even deformed nuclei {sup 170}Yb, {sup 172}Yb and {sup 174}Yb have been analysed in terms of DWBA calculations. The spectroscopic information relative to the odd final nuclei have been compared with the predictions of the collective model and of the Nilsson's model. The effect of various parameters used in the DWBA analysis (form factors, optical wave functions) has been carefully studied. The observed differences between the three final nuclei are qualitatively reproduced in the experimental study of resonances, seen in excitation functions of elastically and inelastically scattered protons on the same target nuclei, and corresponding to analogue states in the three nuclei {sup 171}Lu, {sup 173}Lu and {sup 175}Lu. (author) [French] Les resultats experimentaux de l'etude des reactions (d.p) a E{sub d} = 12 MeV, sur les noyaux deformes pairs-pairs {sup 170}Yb, {sup 172}Yb et {sup 174}Yb ont ete interpretes dans le cadre de l'approximation de Born des ondes deformees. Les informations spectroscopiques relatives aux noyaux impairs finals ont ete comparees aux predictions du modele collectif et du modele de Nilsson, apres avoir examine avec soin l'influence des differents parametres (facteurs de forme, fonctions d'onde 'optiques') utilises lors de l'analyse. Les differences observees entre les trois noyaux finals sont qualitativement reproduites par les resultats experimentaux de l'etude de resonances dans les fonctions d'excitation de diffusion elastique et inelastique de protons sur les memes noyaux-cibles, lors de la recherche d'etats analogues dans les noyaux {sup 171}Lu, {sup 173}Lu et {sup 175}Lu. (auteur)

Creep of parylene-C film

KAUST Repository

Lin, Jeffrey Chun-Hui; Deng, Peigang; Lam, Gilbert; Lu, Bo; Lee, Yi-Kuen; Tai, Yu-Chong

2011-01-01

The glass transition temperature of as-deposited parylene-C is first measured to be 50°C with a ramping-temperature-dependent modulus experiment. The creep behavior of parylene-C film in the primary and secondary creep region is then investigated

Study of the catalytic activity of mixed non-stoichiometric uranium-thorium oxides in carbon monoxide oxidation; Etude de l'activite catalytique des oxydes mixtes d'uranium et de thorium non stoechiometriques dans l'oxydation du monoxyde de carbone

Energy Technology Data Exchange (ETDEWEB)

Brau, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-06-01

The aim of this work has been to study the catalytic properties of non-stoichiometric uranium-thorium oxides having the general formula U{sub x}Th{sub 1-x}O{sub 2+y}, for the oxidation of carbon monoxide. The preparation of pure, homogeneous, isotropic solids having good structural stability and a surface area as high as possible calls for a strict control of the conditions of preparation of these oxides right from the preparation of 'mother salts': the mixed oxalates U{sub x}Th{sub 1-x}(C{sub 2}O{sub 4}){sub 2}, 2H{sub 2}O. A study has been made of their physico-chemical properties (overall and surface chemical constitution, texture, structure, electrical conductivity), as well as of their adsorption properties with respect to gaseous species occurring in the catalytic reaction. This analysis has made it possible to put forward a reaction mechanism based on successive oxidations and reductions of the active surface by the reactants. A study of the reactions kinetics has confirmed the existence of this oxidation-reduction mechanism which only occurs for oxides having a uranium content of above 0.0014. The carbon dioxide produced by the reaction acts as an inhibitor by blocking the sites on which carbon monoxide can be adsorbed. These non-stoichiometric mixed oxides are a particularly clear example of catalysis by oxygen exchange between the solid and the gas phase. (author) [French] Ce travail a pour but l'etude des proprietes catalytiques des oxydes mixtes d'uranium et de thorium non stoechiometriques de formule generale U{sub x}Th{sub 1-x}O{sub 2+y} dans l'oxydation du monoxyde de carbone. L'obtention de solides purs, homogenes, isotropes, de bonne stabilite structurale et d'aire specifique aussi elevee que possible, exige de controler rigoureusement les conditions de preparation de ces oxydes des l'elaboration de leurs 'ascendants': les oxalates mixtes U{sub x}Th{sub 1-x}(C{sub 2}O{sub 4}){sub 2}, 2H{sub 2}O. Leurs proprietes physico-chimiques (composition

Cleavage and creep fracture of rock salt

International Nuclear Information System (INIS)

Chan, K.S.; Munson, D.E.; Bodner, S.R.

1996-01-01

The dominant failure mechanism in rock salt at ambient temperature is either cleavage or creep fracture. Since the transition of creep fracture to cleavage in a compressive stress field is not well understood, failure of rock salt by cleavage and creep fracture is analyzed in this paper to elucidate the effect of stress state on the competition between these two fracture mechanisms. For cleavage fracture, a shear crack is assumed to cause the formation and growth of a symmetric pair of wing cracks in a predominantly compressive stress field. The conditions for wing-crack instability are derived and presented as the cleavage fracture boundary in the fracture mechanism map. Using an existing creep fracture model, stress conditions for the onset of creep fracture and isochronous failure curves of specified times-to-rupture are calculated and incorporated into the fracture mechanism map. The regimes of dominance by cleavage and creep fracture are established and compared with experimental data. The result indicates that unstable propagation of cleavage cracks occurs only in the presence of tensile stress. The onset of creep fracture is promoted by a tensile stress, but can be totally suppressed by a high confining pressure. Transition of creep fracture to cleavage occurs when critical conditions of stress difference and tensile stress for crack instability are exceeded

Creep behavior evaluation of welded joint

International Nuclear Information System (INIS)

Susei, Shuzo; Matsui, Shigetomo; Mori, Eisuke; Shimizu, Shigeki; Satoh, Keisuke.

1980-01-01

In the creep design of high temperature structural elements, it is necessary to grasp the creep performance of joints as a whole, paying attention to the essential lack of uniformity between the material qualities of parent metals and welds. In this study, the factors controlling the creep performance of butt welded joints were investigated theoretically, when they were subjected to lateral tension and longitudinal tension. It was clarified that the rupture time in the case of laterally pulled joints was determined by the ratio of the creep rupture times of weld metals and parent metals, and the rupture time in the case of longitudinally pulled joints was determined by the ratio of the creep rupture times and the ratio of the creep strain rates of weld metals and parent metals. Moreover, when the joints of the former ratio less than 1 and the latter ratio larger than 1 were investigated experimentally, the rupture time in the case of laterally pulled joints was affected by the relative thickness, and when the relative thickness was large, the theoretical and the experimental values coincided, but the relative thickness was small, the theoretical values gave the evaluation on safe side as compared with the experimental values due to the effect of restricting deformation. In the case of longitudinally pulled joints, the theoretical and the experimental values coincided relatively well. The diagram of classifying the creep performance of welded joints was proposed. (Kako, I.)

Creep curve formularization at 950degC for Hastelloy XR

International Nuclear Information System (INIS)

Kaji, Yoshiyuki; Muto, Yasushi

1991-03-01

Creep tests under constant stress were conducted on a nickel-base heat-resistant alloy, Hastelloy XR, in air at 950degC. Minimum creep strain rate, time to the onset of tertiary creep and time to rupture were obtained as a function of applied stress. Then, a creep constitutive equation was made based on the Garofalo formula for primary and secondary creep and based on the Kachanov-Rabotnov formula for tertiary creep, which could represent fairly well the experimental creep deformation curves under the constant stress conditions. The creep deformation under the constant load condition corresponding to the stress increment was analysed using the creep constitutive equation and strain hardening law. Then the calculated creep strain showed slightly higher value than the experimental creep strain, and the calculated life was shorter than the experimental one. (author)

Study of the creep of lime-stabilised zirconia

International Nuclear Information System (INIS)

Saint-Jacques, Robert G.

1971-09-01

This research thesis reports the study of creep of stabilised zirconia containing between 13 and 20 per cent of lime, at temperatures between 1.200 and 1.400 C, and under compression stresses between 500 and 4.000 pounds by square inch. Specimens are polycrystalline with an average grain diameter between 7 and 29 microns. The author notably shows that the creep rate of lime-stabilised zirconia is directly proportional to the applied stress, and that the creep apparent activation energy is close to activation energy of volume self-diffusion of calcium and zirconium in lime-stabilised zirconia. Results of creep tests show that, in the studied conditions, the creep rate is directly proportional to the inverse of the grain average diameter, and this is in compliance with the Gifkins and Snowden theory of creep by sliding at grain boundaries. The author also shows that the creep rate of the lime stabilised zirconia varies with lime content, and reaches a maximum when zirconia contains about 15 per cent of lime. Lower creep rates obtained for higher and lower lime contents are explained [fr

Accelerated diffusion controlled creep of polycrystalline materials. Communication 1. Model of diffusion controlled creep acceleration

International Nuclear Information System (INIS)

Smirnova, E.S.; Chuvil'deev, V.N.

1998-01-01

The model is suggested which describes the influence of large-angle grain boundary migration on a diffusion controlled creep rate in polycrystalline materials (Coble creep). The model is based on the concept about changing the value of migrating boundary free volume when introducing dislocations distributed over the grain bulk into this boundary. Expressions are obtained to calculate the grain boundary diffusion coefficient under conditions of boundary migration and the parameter, which characterized the value of Coble creep acceleration. A comparison is made between calculated and experimental data for Cd, Co and Fe

Long-term creep test with finite elements

International Nuclear Information System (INIS)

Argyris, J.H.; Szimmat, J.; Willam, K.J.

1975-01-01

Following a presentation of concrete creep, a brief summary of the direct and incremental calculation methods for long-term creep behaviour is given. In addition, a survey on the methods of the inner state variables is given which, on the one hand, gives a uniform framework for the various formulations of concrete creep, and on the other hand leads to a computable calculation method. Two examples on long-term creep behaviour illustrate the application field of the calculation method. (orig./LH) [de

Creep of fissile ceramic materials under neutron irradiation

International Nuclear Information System (INIS)

Brucklacher, D.

1975-01-01

Theoretical estimation of the irradiation-induced creep rate of U0 2 by a modification of the Nabarro-Herring model for diffusional creep resulted in a creep rate range between about 6 x 10 -6 to 8 x 10 -5 h -1 for a fission rate of 1 x 10 14 f/cm 3 s and a stress of 2 kgf/mm 2 . Accordingly, the creep rate is enhanced by irradiation at temperatures below 1000 0 to 1200 0 C. It is essentially due to the 'thermal rods' along the fission fragment tracks. Therefore, irradiation-induced creep rates should depend only slightly on temperature and must be markedly lower for carbide and nitride fuel. In-reactor creep experiments on UO 2 were performed at fuel temperatures between 250 0 to 850 0 C. At burnups between 0.3 to 3% the steady-state compressive creep rates are proportional to stress (0 to 4 kgf/mm 2 ) and to fission rate (1 x 10 13 to 2 x 10 14 f/cm 3 s), and are in the range estimated before. The increase in the creep rate with increasing temperature is low and corresponds to an apparent activation energy of only 5200 cal/mol. At burnups above 3 to 4% the stress exponent of the irradiation-induced creep rate increased from n = 1 to n = 1.5. Creep measurements on UO 2 to 15 wt-%Pu0 2 (mechanically mixed, sintered density 86% TD) showed the same temperature dependence as UO 2 below 700 0 C. However, the creep rates were higher by a factor of about 20 compared to fully dense UO 2 . This difference may be explained by assuming a high 'effective' porosity. In-pile creep tests on some UN samples resulted in creep rates that were lower by an order of magnitude than for UO 2 under comparable conditions. (author)

Thoron and associated risks in the handling of thorium compounds; Le thoron et les risques associes dans la manipulation des composes du thorium

Energy Technology Data Exchange (ETDEWEB)

Pradel, J; Billard, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1959-07-01

1. Thorium compounds continually give off thoron and its daughters and their radioactivity can constitute a danger for operators who may inhale them. 2. By analogy with radon the maximum admissible content in air of thoron and its daughters has been set at 10{sup -7} {mu}c/cm{sup 3}. However the differences in behaviour between radon and its active deposit on the one hand, and thoron and its daughters on the other, appear great enough to justify more thorough investigation. In fact it seemed probable that, contrary to what takes place with radon, the thoron + thorium A content at a given point may differ appreciable from the thorium B + thorium C + thorium C' + thorium C'' content at the same point, because of the considerable differences in half-life which allow a greater or lesser distribution. 3. To determine the relative concentrations it was necessary to develop a method for estimating thoron in equilibrium with thorium A, the measurement of thorium B and its daughters being carried out in the conventional way by counting the activity collected on a filter. 4. Another object of this study was to estimate the danger presented by thoron in equilibrium with thorium A in the immediate vicinity of thorium sources, in a plant extracting thorium from urano-thorianite. (author) [French] 1. Le thoron et ses descendants se degagent constamment des composes du thorium et leur radioactivite peut presenter un danger pour les personnes qui sont amenees a les respirer. 2. Par analogie avec le radon, la teneur maximum admissible dans l'air de thoron et de ses descendants a ete fixee a 10{sup -7} {mu}c/cm{sup 3}. Mais, les differences de comportement du radon et de son depot actif d'une part, du thoron et de ses descendants d'autre part, ont paru suffisantes pour justifier une etude plus complete. Il semblait en effet probable, contrairement a ce qui se produit pour le radon, qu'en un meme point, la teneur en thoron + thorium A puisse differer notablement de la teneur en

Thoron and associated risks in the handling of thorium compounds; Le thoron et les risques associes dans la manipulation des composes du thorium

Energy Technology Data Exchange (ETDEWEB)

Pradel, J.; Billard, F. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1959-07-01

1. Thorium compounds continually give off thoron and its daughters and their radioactivity can constitute a danger for operators who may inhale them. 2. By analogy with radon the maximum admissible content in air of thoron and its daughters has been set at 10{sup -7} {mu}c/cm{sup 3}. However the differences in behaviour between radon and its active deposit on the one hand, and thoron and its daughters on the other, appear great enough to justify more thorough investigation. In fact it seemed probable that, contrary to what takes place with radon, the thoron + thorium A content at a given point may differ appreciable from the thorium B + thorium C + thorium C' + thorium C'' content at the same point, because of the considerable differences in half-life which allow a greater or lesser distribution. 3. To determine the relative concentrations it was necessary to develop a method for estimating thoron in equilibrium with thorium A, the measurement of thorium B and its daughters being carried out in the conventional way by counting the activity collected on a filter. 4. Another object of this study was to estimate the danger presented by thoron in equilibrium with thorium A in the immediate vicinity of thorium sources, in a plant extracting thorium from urano-thorianite. (author) [French] 1. Le thoron et ses descendants se degagent constamment des composes du thorium et leur radioactivite peut presenter un danger pour les personnes qui sont amenees a les respirer. 2. Par analogie avec le radon, la teneur maximum admissible dans l'air de thoron et de ses descendants a ete fixee a 10{sup -7} {mu}c/cm{sup 3}. Mais, les differences de comportement du radon et de son depot actif d'une part, du thoron et de ses descendants d'autre part, ont paru suffisantes pour justifier une etude plus complete. Il semblait en effet probable, contrairement a ce qui se produit pour le radon, qu'en un meme point, la teneur en thoron + thorium A puisse

Neutron Activation for Studying Hydroelectrolytic Disorders in Child Pathology; Application de l'Activation Neutronique a l'Etude des Troubles Hydroelectrolytiques en Pathologie Infantile

Energy Technology Data Exchange (ETDEWEB)

Dubois, J. [Hopital Universitaire St-Pierre, Bruxelles (Belgium); Colard, J. [Centre d' Etude de l' Energie Nucleaire, Mol (Belgium); Vis, H. L. [Institut pour la Recherche Scientifique en Afrique Centrale, Bukavu (Congo, The Democratic Republic of the)

1967-10-15

The authors describe a method of determining electrolytes (Na, K, CI) and phosphorus in small fragments of muscle taken from child patients by needle biopsy. This method has been used to study muscular disturbances in hydroelectrolytic illnesses of childhood, whether acute, such as dehydration or toxicosis in infants, or chronic, such as malnutrition or marasmus. The results are discussed in the light of parallel data obtained by other methods of investigation. The authors also discuss the possibility of using this method to estimate intra-cellular hydroelectrolytic disorders in child pathology. (author) [French] Les auteurs presentent la description d'une methode permettant le dosage des electrolytes (Na, K, Cl) et du phosphore sur de petits fragments musculaires preleves par ponction-biopsie chez l'enfant. Cette methode a ete appliquee a l'etude des perturbations du milieu musculaire dans des troubles hydroelectrolytiques aigus (deshydratation et toxicose des nourrissons) et chroniques (malnutrition et denutrition) de l'enfance. Les resultats obtenus sont discutes a la lumiere de donnees recueillies parallelement par d'autres methodes d'investigation. Les auteurs discutent egalement la possibilite d'estimer par cette methode les perturbations hydroelectrolytiques intra-cellulaires en pathologie pediatrique. (author)

E. P. R. spectroscopic study of nitroxide mono- and bi-radicals; Etude par spectroscopie de resonance paramagnetique electronique de monoradicaux et de biradicaux nitroxydes

Energy Technology Data Exchange (ETDEWEB)

Lemaire, H [Commissariat a l' Energie Atomique, Grenoble, 38 (France). Centre d' Etudes Nucleaires

1967-07-01

parfaitement bien definis au point de vue structure chimique. L'etude par resonance paramagnetique electronique de monoradicaux nitroxydes conduit a la determination des axes et des elements du tenseur d'interaction hyperfine electron-noyau d'azote et du tenseur d'anisotropie du facteur de Lande: les resultats sont relies a la structure electronique des radicaux. On interprete qualitativement l'influence du solvant sur les elements des tenseurs, ainsi que les elargissements selectifs des raies hyperfines en milieu visqueux. Dans les biradicaux nitroxydes, la structure hyperfine depend non seulement des interactions magnetiques propres a chaque monomere, mais egalement de la grandeur de l'interaction d'echange separant les etats singulet et triplet du dimere; les biradicaux etudies ici sont les premiers composes organiques pour lesquels l'influence de l'echange sur la structure hyperfine est clairement mise en evidence. La presence de deux electrons non apparies introduit egalement une interaction magnetique dipolaire electron-electron, que l'on peut mettre a profit, dans le cas d'un echange intermediaire, pour determiner le signe de l'echange en etudiant le biradical dans un cristal liquide. Ces composes presentent egalement des elargissements selectifs de transitions hyperfines lorsque la viscosite du solvant croit. La theorie utilisee pour interpreter les largeurs de raie des monoradicaux est etendue au cas des biradicaux; elle rend compte des resultats experimentaux si l'on introduit simultanement les anisotropies des facteurs de Lande et des interactions dipolaires electrons-noyaux et electron-electron, en conduisant a une autre determination du signe de l'echange. (auteur)

microstructure change in 12 % Cr steel during creep

International Nuclear Information System (INIS)

Winatapura, D. S.; Panjaitan, E.; Arslan, A.; Sulistioso, G.S.

1998-01-01

The microstructure change in steel containing of 12% Cr or DIN X20CrMoV 12 1 during creep has been studied by means of optical microscopy and Transmission Electron Microscope (TEM). The creep testing at 650 o C was conducted under constant load of 650 Mpa. The heat treatment of the specimen before creep testing was austenization, followed by tempering for 2 hours. The obtained microstructure was tempered martensitic. This microstructure consisted of the martensite laths, and distributed randomly in the matrix. During tempering, chromium carbide particles of Cr 7 C 6 less than 0,2 μmin-size were precipitated on or and in the subgrain and lath martensite grain boundary. During creep testing those particles transformed and precipitated as chrome carbide precipitates of Cr 23 C 6 . At the secondary creep stage, the void formation occurred, and then it developed into the creep cracks. At tertiary creep stage for 3554 hours, the specimen was failure. The creep cracks were informs of transgranular and intergranular modes which propagated almost perpendicular to the stress axis. From this observation, it is suggested that tempering caused the ductility of martensitic microstructure, which increased the creep resistant or Cr 12% steel

In-situ Creep Testing Capability Development for Advanced Test Reactor

Energy Technology Data Exchange (ETDEWEB)

B. G. Kim; J. L. Rempe; D. L. Knudson; K. G. Condie; B. H. Sencer

2010-08-01

Creep is the slow, time-dependent strain that occurs in a material under a constant strees (or load) at high temperature. High temperature is a relative term, dependent on the materials being evaluated. A typical creep curve is shown in Figure 1-1. In a creep test, a constant load is applied to a tensile specimen maintained at a constant temperature. Strain is then measured over a period of time. The slope of the curve, identified in the figure below, is the strain rate of the test during Stage II or the creep rate of the material. Primary creep, Stage I, is a period of decreasing creep rate due to work hardening of the material. Primary creep is a period of primarily transient creep. During this period, deformation takes place and the resistance to creep increases until Stage II, Secondary creep. Stage II creep is a period with a roughly constant creep rate. Stage II is referred to as steady-state creep because a balance is achieved between the work hardening and annealing (thermal softening) processes. Tertiary creep, Stage III, occurs when there is a reduction in cross sectional area due to necking or effective reduction in area due to internal void formation; that is, the creep rate increases due to necking of the specimen and the associated increase in local stress.

Development of a slow mono-kinetic electron source; Etude et realisation d'une source d'electrons lents monocinetiques

Energy Technology Data Exchange (ETDEWEB)

Ballu, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-06-01

A comparative study of already existing slow mono-kinetic electron guns shows that those using a 127 degrees electrostatic selector can be improved still further to arrive at the performances obtained with spherical 180 degrees selectors for example. For this reason we have examined the 127 degrees selector theoretically in more detail; it appears that it should be possible to obtain a resolving power better than 30 mV for a current of about 10{sup -10} A, on condition that certain improvements be made to the instrument as normally designed, in particular concerning the entrance and exit slides. As a result, the usual suppressors for the scattered electrons are no longer necessary. The development of this apparatus has been carried out with particular care: the dimensional characteristics are fixed to an accuracy of a few microns, although the instrument can be baked out at 300 C. The experimental results are in excellent agreement with the theoretical predictions: for a current of 10{sup -10} A, the measured resolving power is 24 {+-} 4 mV. The easy detection of the He{sup -} resonance line at 19.3 eV has confirmed the advantages of this apparatus for the study of atomic collisions. (author) [French] L'etude comparative des canons a electrons lents monocinetiques realises jusqu'a present montre que ceux qui utilisent un selecteur electrostatique a 127 degres peuvent etre encore perfectionnes en vue de parvenir aux performances obtenues avec les selecteurs spheriques a 180 degres par exemple. D'ou notre etude theorique approfondie du selecteur a 127 degres qui nous a conduit a esperer une resolution meilleure que 30 mV pour un courant de l'ordre de 10{sup -10} A a condition d'apporter certaines ameliorations a la conception usuelle de cet instrument notamment au niveau des fentes d'entree et de sortie. Par voie de consequence les suppresseurs habituels d'electrons parasites deviennent inutiles. L'etude et la mise au point de l'appareil ont fait l'objet de soins

Etude du comportement de pieux forés, Partie I : Expérimentations in situ et en laboratoire