WorldWideScience

Sample records for crash impact numerical

  1. Numerical analyses of an aircraft crash on containment building

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Jae Min; Kim, Seung Hyun; Chang, Yoon Suk [Kyunghee University, Yongin (Korea, Republic of)

    2016-05-15

    The containment building is responsible to isolate and protect internal devices against external conditions like earthquake, hurricane and impact loading. It has also to protect leakage of radioactivity, like LOCA (Loss Of Coolant Accident), when severe accidents occurred. Meanwhile, social awareness such as terrorism has been increased globally after international aircraft crashes at World Trade Center and Pentagon. In this paper, FE (Finite Element) analyses according to variation of crash locations and speeds were carried out to examine the aircraft crash impact on a domestic containment building. In this paper, numerical analyses of aircraft crash on NPP's containment building were performed taking into account different locations and aircraft speeds. (1) Amounts of concrete failure were dependent on the crash locations and the connector was the most delicate location comparing to the dome and wall part. (2) Maximum stress values generated at the liner plate and rebars did not exceed their UTS values.

  2. Numerical analyses of an aircraft crash on containment building

    International Nuclear Information System (INIS)

    Sim, Jae Min; Kim, Seung Hyun; Chang, Yoon Suk

    2016-01-01

    The containment building is responsible to isolate and protect internal devices against external conditions like earthquake, hurricane and impact loading. It has also to protect leakage of radioactivity, like LOCA (Loss Of Coolant Accident), when severe accidents occurred. Meanwhile, social awareness such as terrorism has been increased globally after international aircraft crashes at World Trade Center and Pentagon. In this paper, FE (Finite Element) analyses according to variation of crash locations and speeds were carried out to examine the aircraft crash impact on a domestic containment building. In this paper, numerical analyses of aircraft crash on NPP's containment building were performed taking into account different locations and aircraft speeds. (1) Amounts of concrete failure were dependent on the crash locations and the connector was the most delicate location comparing to the dome and wall part. (2) Maximum stress values generated at the liner plate and rebars did not exceed their UTS values

  3. Structural evaluation of spent nuclear fuel storage facilities under aircraft crash impact. Numerical study on evaluation of sealing performance of metal cask subjected to impact force

    International Nuclear Information System (INIS)

    Namba, Kosuke; Shirai, Koji; Saegusa, Toshiari

    2008-01-01

    A lot of safety evaluations on the important nuclear facilities against the aircraft crash have been reported in other countries. But the condition and the evaluation method to define impact force of aircraft crash have not been described clearly in the reports. In Japan, public concern with the safety evaluation against aircraft crash is increasing. It is important to make clear the behavior of the storage facilities installing the metal casks on impact loading due to aircraft crash. In this study, concerning crash between commercial aircraft and storage facility, impact analysis using dynamic analysis code LS-DYNA has been executed. The results showed that the storage facility was not completely destroyed. But the rigid aircraft engine may penetrate into the storage facility with local failure. Thus, we assumed the engine hit a metal cask in the storage facility and evaluated sealing performance of the metal cask under the impact loading. If the engine with 90m/s crashed the storage facility having concrete wall of 85cm in thickness, the remaining velocity became 60m/s after penetration. We calculated impact force of the engine with 60m/s crashing into the metal cask. Concerning the metal cask loaded the impact force, impact analysis was executed. We assumed two directions of impact force. One is vertical load and another is horizontal load against the cask. The result showed that plastic strain was not generated on flanges of the 1st lid and the sealing performance of the cask was maintained in each impact case. (author)

  4. Impact of pavement conditions on crash severity.

    Science.gov (United States)

    Li, Yingfeng; Liu, Chunxiao; Ding, Liang

    2013-10-01

    Pavement condition has been known as a key factor related to ride quality, but it is less clear how exactly pavement conditions are related to traffic crashes. The researchers used Geographic Information System (GIS) to link Texas Department of Transportation (TxDOT) Crash Record Information System (CRIS) data and Pavement Management Information System (PMIS) data, which provided an opportunity to examine the impact of pavement conditions on traffic crashes in depth. The study analyzed the correlation between several key pavement condition ratings or scores and crash severity based on a large number of crashes in Texas between 2008 and 2009. The results in general suggested that poor pavement condition scores and ratings were associated with proportionally more severe crashes, but very poor pavement conditions were actually associated with less severe crashes. Very good pavement conditions might induce speeding behaviors and therefore could have caused more severe crashes, especially on non-freeway arterials and during favorable driving conditions. In addition, the results showed that the effects of pavement conditions on crash severity were more evident for passenger vehicles than for commercial vehicles. These results provide insights on how pavement conditions may have contributed to crashes, which may be valuable for safety improvement during pavement design and maintenance. Readers should notice that, although the study found statistically significant effects of pavement variables on crash severity, the effects were rather minor in reality as suggested by frequency analyses. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Crash test rating and likelihood of major thoracoabdominal injury in motor vehicle crashes: the new car assessment program side-impact crash test, 1998-2010.

    Science.gov (United States)

    Figler, Bradley D; Mack, Christopher D; Kaufman, Robert; Wessells, Hunter; Bulger, Eileen; Smith, Thomas G; Voelzke, Bryan

    2014-03-01

    The National Highway Traffic Safety Administration's New Car Assessment Program (NCAP) implemented side-impact crash testing on all new vehicles since 1998 to assess the likelihood of major thoracoabdominal injuries during a side-impact crash. Higher crash test rating is intended to indicate a safer car, but the real-world applicability of these ratings is unknown. Our objective was to determine the relationship between a vehicle's NCAP side-impact crash test rating and the risk of major thoracoabdominal injury among the vehicle's occupants in real-world side-impact motor vehicle crashes. The National Automotive Sampling System Crashworthiness Data System contains detailed crash and injury data in a sample of major crashes in the United States. For model years 1998 to 2010 and crash years 1999 to 2010, 68,124 occupants were identified in the Crashworthiness Data System database. Because 47% of cases were missing crash severity (ΔV), multiple imputation was used to estimate the missing values. The primary predictor of interest was the occupant vehicle's NCAP side-impact crash test rating, and the outcome of interest was the presence of major (Abbreviated Injury Scale [AIS] score ≥ 3) thoracoabdominal injury. In multivariate analysis, increasing NCAP crash test rating was associated with lower likelihood of major thoracoabdominal injury at high (odds ratio [OR], 0.8; 95% confidence interval [CI], 0.7-0.9; p NCAP side-impact crash test rating is associated with a lower likelihood of major thoracoabdominal trauma. Epidemiologic study, level III.

  6. Numerical simulation of aircraft crash on nuclear containment structure

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, M.A., E-mail: iqbalfce@iitr.ernet.in [Department of Civil Engineering, Indian Institute of Technology Roorkee, Roorkee 247667 (India); Rai, S.; Sadique, M.R.; Bhargava, P. [Department of Civil Engineering, Indian Institute of Technology Roorkee, Roorkee 247667 (India)

    2012-02-15

    Highlights: Black-Right-Pointing-Pointer The deformation was more localised at the center of cylindrical portion. Black-Right-Pointing-Pointer The peak deflection at the junction of dome and cylinder was found to be 67 mm. Black-Right-Pointing-Pointer The peak deflection at midpoint of the cylindrical portion was found to be 88.9 mm. Black-Right-Pointing-Pointer The strain rate was found to be an important parameter to effect the deformation. Black-Right-Pointing-Pointer The model without strain rate and 290 s{sup -1} strain rate predicted very high deformations. - Abstract: Numerical simulations were carried with ABAQUS/Explicit finite element code in order to predict the response of BWR Mark III type nuclear containment against Boeing 707-320 aircraft crash. The load of the aircraft was applied using and force history curve. The damaged plasticity model was used to predict the behavior of concrete while the Johnson-Cook elasto-viscoplastic material model was used to incorporate the behavior of steel reinforcement. The crash was considered to occur at two different locations i.e., the midpoint of the cylindrical portion and the junction of dome and cylinder. The midpoint of the cylindrical portion experienced more deformation. The strain rate in the material model was varied and found to have a significant effect on the response of containment. The results of the present investigation were compared with those of the studies available in literature and a close agreement with the previous results was found in terms of maximum target deformation.

  7. Impact of connected vehicles on mitigating secondary crash risk

    Directory of Open Access Journals (Sweden)

    Hong Yang

    2017-09-01

    Full Text Available Reducing the risk of secondary crashes is a key goal for effective traffic incident management. However, only few countermeasures have been established in practices to achieve the goal. This is mainly due to the stochastic nature of both primary and secondary crashes. Given the emerging connected vehicle (CV technologies, it is highly likely that CVs will soon be able to communicate with each other through the ad-hoc wireless vehicular network. Information sharing among vehicles is deemed to change traffic operations and allow motorists for more proactive actions. Motorists who receive safety messages can be motivated to approach queues and incident sites with more caution. As a result of the improved situational awareness, the risk of secondary crashes is expected to be reduced. To examine whether this expectation is achievable or not, this study aims to assess the impact of connectivity on the risk of secondary crashes. A simulation-based modeling framework that enables vehicle-to-vehicle communication module was developed. Since crashes cannot be directly simulated in micro-simulation, the use of surrogate safety measures was proposed to capture vehicular conflicts as a proxy for secondary crash risk upstream of a primary crash site. An experimental study was conducted based on the developed simulation modeling framework. The results show that the use of connected vehicles can be a viable way to reduce the risk of secondary crashes. Their impact is expected to change with an increasing market penetration of connected vehicles.

  8. Finite Element Crash Simulations and Impact-Induced Injuries

    Directory of Open Access Journals (Sweden)

    Jaroslav Mackerle

    1999-01-01

    Full Text Available This bibliography lists references to papers, conference proceedings and theses/dissertations dealing with finite element simulations of crashes, impact-induced injuries and their protection that were published in 1980–1998. 390 citations are listed.

  9. Aircraft crash survivability from viscous injury in vertical impacts

    OpenAIRE

    Barth, Thomas H.

    2009-01-01

    This research investigated viscous injury from vertical impact loading to determine if it is critical to survivability of aircraft accidents. A unique database was built from autopsy reports and accident investigations combining injury data with the vehicle impact data. Computer models were created and used to assess injury potential. Common design limits and actual crash data from full scale research experiments were used as inputs. The results were analyzed according to publi...

  10. Crash simulation of UNS electric vehicle under frontal front impact

    Energy Technology Data Exchange (ETDEWEB)

    Susilo, D. D., E-mail: djoksus-2010@yahoo.com; Lukamana, N. I., E-mail: n.indra.lukmana@gmail.com; Budiana, E. P., E-mail: budiana.e@gmail.com; Tjahjana, D. D. D. P., E-mail: danar1405@gmail.com [Mechanical Engineering Department, Sebelas Maret University, Surakarta (Indonesia)

    2016-03-29

    Sebelas Maret University has been developing an Electric Vehicle namely SmarT-EV UNS. The main structure of the car are chasis and body. The chasis is made from steel and the body is made from fiberglass composite. To ensure the safety of the car, both static and dynamic tests were carried out to these structures, including their materials, like: tensile test, bending test, and impact test. Another test needed by this vehicle is crashworthiness test. To perform the test, it is needed complex equipments and it is quite expensive. Another way to obtain vehicle crashworthiness behaviour is by simulate it. The purpose of this study was to simulate the response of the Smart-EV UNS electric vehicle main structure when crashing rigid barrier from the front. The crash simulation was done in according to the NHTSA (National Highway Traffic Safety Administration) within the speed of the vehicle of 35 mph. The UNS Electric Vehicle was modelled using SolidWorks software, and the simulation process was done by finite element method using ANSYS software. The simulation result showed that the most internal impact energy was absorbed by chassis part. It absorbed 76.2% of impact energy, then the base absorbed 11.3 %, while the front body absorbed 2.5 %, and the rest was absorbed by fender, hood, and other parts.

  11. Injury and side impact air bag deployment in near and far sided motor vehicle crashes, United States, 2000-2005.

    Science.gov (United States)

    Stadter, Greg; Grabowski, Jurek G; Burke, Christine; Aldaghlas, Tayseer A; Robinson, Linda; Fakhry, Samir M

    2008-12-01

    Side impact crashes, the most lethal type, account for 26% of all motor vehicle crashes in the United States. The purpose of this study is to delineate side impact airbag (SIAB) deployment rates, injury rates, and analyze crash factors associated with SIAB deployment and occupant injury. All passenger vehicles equipped with SIABs that were involved in a side impact crash were identified from the National Automotive Sampling System database. Crashes with multiple impacts, ejections, unbelted drivers or rollovers were excluded from the study. The outcome variables of interest were SIAB deployment and driver injury. SIAB deployment was compared in similar crashes to analyze the impact on driver's injury severity score. Other crash factors were also examined to analyze what role they play in SIAB deployment rates and injury rates, such as plane of contact, striking object and Delta-V. The data set for this study contained 247 drivers in near and far side crashes in vehicles with installed SIABs. Overall SIAB deployment was 43% in side impact crashes. A significant factor associated with both the SIAB deployment rate and the driver's injury rate was increased Delta-V. SIABs do not deploy consistently in crashes with a high Delta-V or with a lateral primary direction of force and a front plane of contact. In these two scenarios, further research is warranted on SIAB deployments. With SIAB deployment, it appears drivers are able to sustain a higher Delta-V impact without serious injury.

  12. Analisis Penyerapan Energi Crash Box Pola Origami pada Pengujian Frontal Impact Posisi Angular Frontal

    Directory of Open Access Journals (Sweden)

    Redi Bintarto

    2017-05-01

    Full Text Available In the car, the body structure is designed in such a way so as to transfer and absorb energy. This serves to minimize the result of this accident related to kinetic energy. This needs a system to absorb the kinetic energy maximally, so as a result of a frontal collision events that can be reduced optimally and kinetic energy can be absorbed by a front body structure. Devices used for absorbing kinetic energy in the car is usually called a crash box, which is located between the main structure and bumper. Crash Box generally tubular thin shaped. It has been a lot of research about the crash box. In this study using crash box origami patterns and using methods taguchi orthogonal array L9 (34. AA7003-T7 aluminum material modeled as bilinear isotropic hardening, the loading method is Frontal Impact Frontal Angular Position with impact angles of 5, 15 and 30 degree by using the finite element software simulation methods. The simulation results showed that the crash box in the lowest possible energy absorption were happened at crash box with 5 degree, with 683 153 Joule energy absorbsion. The highest result was happened to crash box number 5 with the results of 3,140.778 Joule. Lowest absorption on impact of 15 degree and 30 degree were happened to crash box number 1 and number 3 with a value of 245 685 Joule and 174 845 Joule, while the highest absorption at mumber 3 with each value 1,708.521 Joule and 1,750.872 Joule.

  13. Classification of soft and hard impacts-Application to aircraft crash

    International Nuclear Information System (INIS)

    Koechlin, Pierre; Potapov, Serguei

    2009-01-01

    Before modeling an aircraft crash on a shield building of a nuclear power plant, it is very important to understand the physical phenomena and the structural behavior associated with this kind of impact. In the scientific literature, aircraft crash is classified as a soft impact, or as an impact of deformable missile. Nevertheless the existing classifications are not precise enough to be able to predict 'a priori' the structural response mode. The aim of this paper is to characterize very precisely what is a soft and a hard impact in the frame of aircraft crash on nuclear power plant. First the existing qualitative definition of soft and hard impact is quickly reviewed in order to introduce a new criterion to make a quantitative distinction between soft and hard impact. Then the experimental tests carried out during the last thirty years in the research field of aircraft crash are presented in the light of the new classification. The authors show that this characterization of soft and hard impacts has a real physical interest because it is linked to the failure mode for perforation: for soft impacts, perforation is the consequence of a shear plug breaking away and for hard impact it comes from local failure and projectile penetration. Moreover the boundary between soft and hard impact is the limit for the use of an impact force in an uncoupled computation of the impact

  14. Side Impact Regulatory Trends, Crash Environment and Injury Risk in the USA.

    Science.gov (United States)

    Prasad, Priya; Dalmotas, Dainius; Chouinard, Aline

    2015-11-01

    Light duty vehicles in the US are designed to meet and exceed regulatory standards, self-imposed industry agreements and safety rating tests conducted by NHTSA and IIHS. The evolution of side impact regulation in the US from 1973 to 2015 is discussed in the paper along with two key industry agreements in 2003 affecting design of restraint systems and structures for side impact protection. A combination of all the above influences shows that vehicles in the US are being designed to more demanding and comprehensive requirements than in any other region of the world. The crash environment in the US related to side impacts was defined based on data in the nationally representative crash database NASS. Crash environment factors, including the distribution of cars, light trucks and vans (LTV's), and medium-to-heavy vehicles (MHV's) in the fleet, and the frequency of their interactions with one another in side impacts, were considered. Other factors like, crash severity in terms of closing velocity between two vehicles involved in crash, gender and age of involved drivers in two-vehicle and single vehicle crashes, were also examined. Injury risks in side impacts to drivers and passengers were determined in various circumstances such as near-side, far-side, and single vehicle crashes as a function of crash severity, in terms of estimated closing speed or lateral delta-V. Also injury risks in different pairs of striking and struck cars and LTV's, were estimated. A logistic regression model for studying injury risks in two vehicle crashes was developed. The risk factors included in the model include case and striking vehicles, consisting of cars, SUV's, vans, and pickup trucks, delta-V, damage extent, occupant proximity to the impact side, age and gender of the occupant, and belt use. Results show that car occupants make up the vast majority of serious-to-fatally injured occupants. Injury rates of car occupants in two-vehicle collision are highest when the car is struck by a

  15. Robust human body model injury prediction in simulated side impact crashes.

    Science.gov (United States)

    Golman, Adam J; Danelson, Kerry A; Stitzel, Joel D

    2016-01-01

    This study developed a parametric methodology to robustly predict occupant injuries sustained in real-world crashes using a finite element (FE) human body model (HBM). One hundred and twenty near-side impact motor vehicle crashes were simulated over a range of parameters using a Toyota RAV4 (bullet vehicle), Ford Taurus (struck vehicle) FE models and a validated human body model (HBM) Total HUman Model for Safety (THUMS). Three bullet vehicle crash parameters (speed, location and angle) and two occupant parameters (seat position and age) were varied using a Latin hypercube design of Experiments. Four injury metrics (head injury criterion, half deflection, thoracic trauma index and pelvic force) were used to calculate injury risk. Rib fracture prediction and lung strain metrics were also analysed. As hypothesized, bullet speed had the greatest effect on each injury measure. Injury risk was reduced when bullet location was further from the B-pillar or when the bullet angle was more oblique. Age had strong correlation to rib fractures frequency and lung strain severity. The injuries from a real-world crash were predicted using two different methods by (1) subsampling the injury predictors from the 12 best crush profile matching simulations and (2) using regression models. Both injury prediction methods successfully predicted the case occupant's low risk for pelvic injury, high risk for thoracic injury, rib fractures and high lung strains with tight confidence intervals. This parametric methodology was successfully used to explore crash parameter interactions and to robustly predict real-world injuries.

  16. Advances in crash dynamics for aircraft safety

    Science.gov (United States)

    Guida, M.; Marulo, F.; Abrate, S.

    2018-04-01

    This paper studies the ability of the fuselage's lower lobe to absorb the energy during a crash landing, where the introduction of the composite materials can improve the crash survivability thanks to the crushing capability of structural parts to limit the effects of deceleration on the occupants. Providing a protective shell around the occupants and minimizing the risks of injuries during and immediately after the crash in the post-crash regime is a safety requirement. This study consists of: (1) numerical and experimental investigations on small components to verify design concepts using high performance composite materials; (2) analyses of full scale crashes of fuselage lower lobes. This paper outlines an approach for demonstrating the crashworthiness characteristics of the airframe performing a drop test at low velocity impact to validate a numerical model obtained by assembling structural components and materials' properties previously obtained by testing coupons and sub-elements.

  17. The impacts of multiple rest-break periods on commercial truck driver's crash risk.

    Science.gov (United States)

    Chen, Chen; Xie, Yuanchang

    2014-02-01

    Driver fatigue has been a major contributing factor to fatal commercial truck crashes, which accounted for about 10% of all fatal motor vehicle crashes that happened between 2009 and 2011. Commercial truck drivers' safety performance can deteriorate easily due to fatigue caused by long driving hours and irregular working schedules. To ensure safety, truck drivers often use off-duty time and short rest breaks during a trip to recover from fatigue. This study thoroughly investigates the impacts of off-duty time prior to a trip and short rest breaks on commercial truck safety by using Cox proportional hazards model and Andersen-Gill model. It is found that increasing total rest-break duration can consistently reduce fatigue-related crash risk. Similarly, taking more rest breaks can help to reduce crash risk. The results suggest that two rest breaks are generally considered enough for a 10-hour trip, as three or more rest breaks may not further reduce crash risk substantially. Also, the length of each rest break does not need to be very long and 30min is usually adequate. In addition, this study investigates the safety impacts of when to take rest breaks. It is found that taking rest breaks too soon after a trip starts will cause the rest breaks to be less effective. The findings of this research can help policy makers and trucking companies better understand the impacts of multiple rest-break periods and develop more effective rules to improve the safety of truck drivers. Copyright © 2014 Elsevier Ltd and National Safety Council. All rights reserved.

  18. Protection of children restrained in child safety seats in side impact crashes.

    Science.gov (United States)

    Arbogast, Kristy B; Locey, Caitlin M; Zonfrillo, Mark R; Maltese, Matthew R

    2010-10-01

    The performance of child restraint systems (CRS) in side impact motor vehicle crashes has been under study due to the injury and fatality burden of these events. Although previous research has quantified injury risk or described injured body regions, safety advances require an understanding of injury causation. Therefore, the objective was to delineate injury causation scenarios for CRS-restrained children in side impacts and document probable contact points in the vehicle interior. Two in-depth crash investigation databases, the Crash Injury Research and Engineering Network and the Partners for Child Passenger Safety Study, were queried for rear-seated, CRS-restrained children in side impact crashes who sustained Abbreviated Injury Scale 2+ injury. These cases were reviewed by a multidisciplinary team of physicians and engineers to describe injury patterns, injury causation, and vehicle components that contributed to the injuries. Forty-one occupants (average age, 2.6 years) met the inclusion criteria. Twenty-four were near side to the crash, 7 were far side, and 10 were center seated. The most common injuries were to the skull and brain with an increasing proportion of skull fracture as age increased. Head and spine injuries without evidence of head contact were rare but present. All thoracic injuries were lung contusions and no rib fractures occurred. Near-side head and face contacts points were along the rear vertical plane of the window and the horizontal plane of the window sill. Head and face contact points for center- and far-side occupants were along the edges of the front seat back and front seat head restraint. Head injuries are the target for injury prevention for children in CRS in side impact crashes. Most of these injuries are due to the contact; for near-side occupants, contact with the CRS structure and the door interior, for far- or center-seated occupants, contact with the front seat back. These data are useful in developing both educational and

  19. Bayesian Poisson hierarchical models for crash data analysis: Investigating the impact of model choice on site-specific predictions.

    Science.gov (United States)

    Khazraee, S Hadi; Johnson, Valen; Lord, Dominique

    2018-08-01

    The Poisson-gamma (PG) and Poisson-lognormal (PLN) regression models are among the most popular means for motor vehicle crash data analysis. Both models belong to the Poisson-hierarchical family of models. While numerous studies have compared the overall performance of alternative Bayesian Poisson-hierarchical models, little research has addressed the impact of model choice on the expected crash frequency prediction at individual sites. This paper sought to examine whether there are any trends among candidate models predictions e.g., that an alternative model's prediction for sites with certain conditions tends to be higher (or lower) than that from another model. In addition to the PG and PLN models, this research formulated a new member of the Poisson-hierarchical family of models: the Poisson-inverse gamma (PIGam). Three field datasets (from Texas, Michigan and Indiana) covering a wide range of over-dispersion characteristics were selected for analysis. This study demonstrated that the model choice can be critical when the calibrated models are used for prediction at new sites, especially when the data are highly over-dispersed. For all three datasets, the PIGam model would predict higher expected crash frequencies than would the PLN and PG models, in order, indicating a clear link between the models predictions and the shape of their mixing distributions (i.e., gamma, lognormal, and inverse gamma, respectively). The thicker tail of the PIGam and PLN models (in order) may provide an advantage when the data are highly over-dispersed. The analysis results also illustrated a major deficiency of the Deviance Information Criterion (DIC) in comparing the goodness-of-fit of hierarchical models; models with drastically different set of coefficients (and thus predictions for new sites) may yield similar DIC values, because the DIC only accounts for the parameters in the lowest (observation) level of the hierarchy and ignores the higher levels (regression coefficients

  20. A METHOD FOR DETERMINING THE RADIALLY-AVERAGED EFFECTIVE IMPACT AREA FOR AN AIRCRAFT CRASH INTO A STRUCTURE

    Energy Technology Data Exchange (ETDEWEB)

    Walker, William C. [ORNL

    2018-02-01

    This report presents a methodology for deriving the equations which can be used for calculating the radially-averaged effective impact area for a theoretical aircraft crash into a structure. Conventionally, a maximum effective impact area has been used in calculating the probability of an aircraft crash into a structure. Whereas the maximum effective impact area is specific to a single direction of flight, the radially-averaged effective impact area takes into consideration the real life random nature of the direction of flight with respect to a structure. Since the radially-averaged effective impact area is less than the maximum effective impact area, the resulting calculated probability of an aircraft crash into a structure is reduced.

  1. Safety impacts of platform tram stops on pedestrians in mixed traffic operation: A comparison group before-after crash study.

    Science.gov (United States)

    Naznin, Farhana; Currie, Graham; Logan, David; Sarvi, Majid

    2016-01-01

    Tram stops in mixed traffic environments present a variety of safety, accessibility and transport efficiency challenges. In Melbourne, Australia the hundred year-old electric tram system is progressively being modernized to improve passenger accessibility. Platform stops, incorporating raised platforms for level entry into low floor trams, are being retro-fitted system-wide to replace older design stops. The aim of this study was to investigate the safety impacts of platform stops over older design stops (i.e. Melbourne safety zone tram stops) on pedestrians in the context of mixed traffic tram operation in Melbourne, using an advanced before-after crash analysis approach, the comparison group (CG) method. The CG method evaluates safety impacts by taking into account the general trends in safety and the unobserved factors at treatment and comparison sites that can alter the outcomes of a simple before-after analysis. The results showed that pedestrian-involved all injury crashes reduced by 43% after platform stop installation. This paper also explores a concern that the conventional CG method might underestimate safety impacts as a result of large differences in passenger stop use between treatment and comparison sites, suggesting differences in crash risk exposure. To adjust for this, a modified analysis explored crash rates (crash counts per 10,000 stop passengers) for each site. The adjusted results suggested greater reductions in pedestrian-involved crashes after platform stop installation: an 81% reduction in pedestrian-involved all injury crashes and 86% reduction in pedestrian-involved FSI crashes, both are significant at the 95% level. Overall, the results suggest that platform stops have considerable safety benefits for pedestrians. Implications for policy and areas for future research are explored. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Thoracic aortic injury in motor vehicle crashes: the effect of impact direction, side of body struck, and seat belt use.

    Science.gov (United States)

    Fitzharris, Michael; Franklyn, Melanie; Frampton, Richard; Yang, King; Morris, Andrew; Fildes, Brian

    2004-09-01

    Using in-depth, real-world motor vehicle crash data from the United States and the United Kingdom, we aimed to assess the incidence and risk factors associated with thoracic aorta injuries. De-identified National Automotive Sampling System Crashworthiness Data System (U.S.) and Co-operative Crash Injury Study (U.K.) data formed the basis of this retrospective analysis. Logistic regression was used to assess the level of risk of thoracic aorta injury associated with impact direction, seat belt use and, given the asymmetry of the thoracic cavity, whether being struck toward the left side of the body was associated with increased risk in side-impact crashes. A total of 13,436 U.S. and 3,756 U.K. drivers and front seat passengers were analyzed. The incidence of thoracic aorta injury in the U.S. and U.K. samples was 1.5% (n = 197) and 1.9% (n = 70), respectively. The risk was higher for occupants seated on the side closest to the impact than for occupants involved in frontal impact crashes. This was the case irrespective of whether the force was applied toward the left (belted: relative risk [RR], 4.6; 95% confidence interval [CI], 2.9-7.1; p direction. Thoracic aorta injuries were found to be associated with high impact severity, and being struck by a sports utility vehicle relative to a passenger vehicle (RR, 1.7; 95% CI, 1.2-2.3; p = 0.001). Aortic injuries have been conventionally associated with frontal impacts. However, emergency clinicians should be aware that occupants of side-impact crashes are at greater risk, particularly if the occupant was unbelted and involved in a crash of high impact severity.

  3. Dynamic Response Analysis of Storage Cask Lid Structure Subjected to Lateral Impact Load of Aircraft Engine Crash

    International Nuclear Information System (INIS)

    Almomania, Belal; Kang, Hyun Gook; Lee, Sanghoon

    2015-01-01

    Several numerical methods and tests have been carried out to measure the capability of storage cask to withstand extreme impact loads. Testing methods are often constrained by cost, and difficulty in preparation for several impact conditions with different applied loads, and areas of impact. Instead, analytic method is an acceptable process that can easily apply different impact conditions for the evaluation of cask integrity. The aircraft engine impact is considered as one of the most critical impact accidents on the storage cask that significantly affects onto the lid closure system and may cause a considerable release of radioactive materials. This paper presents a method for evaluating the dynamic responses of one upper metal cask lid closure without impact limiters subjected to lateral impact of an aircraft engine with respect to variation of the impact velocity. An assessment method to predict damage response due to the lateral engine impact onto metal storage cask has been studied by using computer code LS-DYNA. The dynamic behavior of the lid movements was successfully calculated by utilizing a simplified finite element cask model, which showed a good agreement with the previous research. The simulation analyses results showed that no significant plastic deformation for bolts, lid, and the cask body. In this study, the lid opening and sliding displacements are considered as the major factors in initiating the leakage path. This analysis may be useful for evaluating the instantaneous leakage rates in a connection with the sliding and opening displacements between the lid and the flange to ensure that the radiological consequences caused by an aircraft engine crash accident during the storage phase are within the permissible level

  4. Dynamic Response Analysis of Storage Cask Lid Structure Subjected to Lateral Impact Load of Aircraft Engine Crash

    Energy Technology Data Exchange (ETDEWEB)

    Almomania, Belal; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Lee, Sanghoon [Keimyung Univ., Daegu (Korea, Republic of)

    2015-10-15

    Several numerical methods and tests have been carried out to measure the capability of storage cask to withstand extreme impact loads. Testing methods are often constrained by cost, and difficulty in preparation for several impact conditions with different applied loads, and areas of impact. Instead, analytic method is an acceptable process that can easily apply different impact conditions for the evaluation of cask integrity. The aircraft engine impact is considered as one of the most critical impact accidents on the storage cask that significantly affects onto the lid closure system and may cause a considerable release of radioactive materials. This paper presents a method for evaluating the dynamic responses of one upper metal cask lid closure without impact limiters subjected to lateral impact of an aircraft engine with respect to variation of the impact velocity. An assessment method to predict damage response due to the lateral engine impact onto metal storage cask has been studied by using computer code LS-DYNA. The dynamic behavior of the lid movements was successfully calculated by utilizing a simplified finite element cask model, which showed a good agreement with the previous research. The simulation analyses results showed that no significant plastic deformation for bolts, lid, and the cask body. In this study, the lid opening and sliding displacements are considered as the major factors in initiating the leakage path. This analysis may be useful for evaluating the instantaneous leakage rates in a connection with the sliding and opening displacements between the lid and the flange to ensure that the radiological consequences caused by an aircraft engine crash accident during the storage phase are within the permissible level.

  5. Overall impact of speed-related initiatives and factors on crash outcomes.

    Science.gov (United States)

    D'Elia, A; Newstead, S; Cameron, M

    2007-01-01

    From December 2000 until July 2002 a package of speed-related initiatives and factors took place in Victoria, Australia. The broad aim of this study was to evaluate the overall impact of the package on crash outcomes. Monthly crash counts and injury severity proportions were assessed using Poisson and logistic regression models respectively. The model measured the overall effect of the package after adjusting as far as possible for non-speed road safety initiatives and socio-economic factors. The speed-related package was associated with statistically significant estimated reductions in casualty crashes and suggested reductions in injury severity with trends towards increased reductions over time. From December 2000 until July 2002, three new speed enforcement initiatives were implemented in Victoria, Australia. These initiatives were introduced in stages and involved the following key components: More covert operations of mobile speed cameras, including flash-less operations; 50% increase in speed camera operating hours; and lowering of cameras' speed detection threshold. In addition, during the period 2001 to 2002, the 50 km/h General Urban Speed Limit (GUSL) was introduced (January 2001), there was an increase in speed-related advertising including the "Wipe Off 5" campaign, media announcements were made related to the above enforcement initiatives and there was a speeding penalty restructure. The above elements combine to make up a package of speed-related initiatives and factors. The package represents a broad, long term program by Victorian government agencies to reduce speed based on three linked strategies: more intensive Police enforcement of speed limits to deter potential offenders, i.e. the three new speed enforcement initiatives just described - supported by higher penalties; a reduction in the speed limit on local streets throughout Victoria from 60 km/h to 50 km/h; and provision of information using the mass media (television, radio and billboard) to

  6. Reducing the environmental impact of trials: a comparison of the carbon footprint of the CRASH-1 and CRASH-2 clinical trials

    Science.gov (United States)

    2011-01-01

    Background All sectors of the economy, including the health research sector, must reduce their carbon emissions. The UK National Institute for Health Research has recently prepared guidelines on how to minimize the carbon footprint of research. We compare the carbon emissions from two international clinical trials in order to identify where emissions reductions can be made. Methods We conducted a carbon audit of two clinical trials (the CRASH-1 and CRASH-2 trials), quantifying the carbon dioxide emissions produced over a one-year audit period. Carbon emissions arising from the coordination centre, freight delivery, trial-related travel and commuting were calculated and compared. Results The total emissions in carbon dioxide equivalents during the one-year audit period were 181.3 tonnes for CRASH-1 and 108.2 tonnes for CRASH-2. In total, CRASH-1 emitted 924.6 tonnes of carbon dioxide equivalents compared with 508.5 tonnes for CRASH-2. The CRASH-1 trial recruited 10,008 patients over 5.1 years, corresponding to 92 kg of carbon dioxide per randomized patient. The CRASH-2 trial recruited 20,211 patients over 4.7 years, corresponding to 25 kg of carbon dioxide per randomized patient. The largest contributor to emissions in CRASH-1 was freight delivery of trial materials (86.0 tonnes, 48% of total emissions), whereas the largest contributor in CRASH-2 was energy use by the trial coordination centre (54.6 tonnes, 30% of total emissions). Conclusions Faster patient recruitment in the CRASH-2 trial largely accounted for its greatly increased carbon efficiency in terms of emissions per randomized patient. Lighter trial materials and web-based data entry also contributed to the overall lower carbon emissions in CRASH-2 as compared to CRASH-1. Trial Registration Numbers CRASH-1: ISRCTN74459797 CRASH-2: ISRCTN86750102 PMID:21291517

  7. Reducing the environmental impact of trials: a comparison of the carbon footprint of the CRASH-1 and CRASH-2 clinical trials

    Directory of Open Access Journals (Sweden)

    Roberts Ian

    2011-02-01

    Full Text Available Abstract Background All sectors of the economy, including the health research sector, must reduce their carbon emissions. The UK National Institute for Health Research has recently prepared guidelines on how to minimize the carbon footprint of research. We compare the carbon emissions from two international clinical trials in order to identify where emissions reductions can be made. Methods We conducted a carbon audit of two clinical trials (the CRASH-1 and CRASH-2 trials, quantifying the carbon dioxide emissions produced over a one-year audit period. Carbon emissions arising from the coordination centre, freight delivery, trial-related travel and commuting were calculated and compared. Results The total emissions in carbon dioxide equivalents during the one-year audit period were 181.3 tonnes for CRASH-1 and 108.2 tonnes for CRASH-2. In total, CRASH-1 emitted 924.6 tonnes of carbon dioxide equivalents compared with 508.5 tonnes for CRASH-2. The CRASH-1 trial recruited 10,008 patients over 5.1 years, corresponding to 92 kg of carbon dioxide per randomized patient. The CRASH-2 trial recruited 20,211 patients over 4.7 years, corresponding to 25 kg of carbon dioxide per randomized patient. The largest contributor to emissions in CRASH-1 was freight delivery of trial materials (86.0 tonnes, 48% of total emissions, whereas the largest contributor in CRASH-2 was energy use by the trial coordination centre (54.6 tonnes, 30% of total emissions. Conclusions Faster patient recruitment in the CRASH-2 trial largely accounted for its greatly increased carbon efficiency in terms of emissions per randomized patient. Lighter trial materials and web-based data entry also contributed to the overall lower carbon emissions in CRASH-2 as compared to CRASH-1. Trial Registration Numbers CRASH-1: ISRCTN74459797 CRASH-2: ISRCTN86750102

  8. Dynamic impact testing of hedgehog spines using a dual-arm crash pendulum.

    Science.gov (United States)

    Swift, Nathan B; Hsiung, Bor-Kai; Kennedy, Emily B; Tan, Kwek-Tze

    2016-08-01

    Hedgehog spines are a potential model for impact resistant structures and material. While previous studies have examined static mechanical properties of individual spines, actual collision tests on spines analogous to those observed in the wild have not previously been investigated. In this study, samples of roughly 130 keratin spines were mounted vertically in thin substrates to mimic the natural spine layout on hedgehogs. A weighted crash pendulum was employed to induce and measure the effects of repeated collisions against samples, with the aim to evaluate the influence of various parameters including humidity effect, impact energy, and substrate hardness. Results reveal that softer samples-due to humidity conditioning and/or substrate material used-exhibit greater durability over multiple impacts, while the more rigid samples exhibit greater energy absorption performance at the expense of durability. This trend is exaggerated during high-energy collisions. Comparison of the results to baseline tests with industry standard impact absorbing foam, wherein the spines exhibit similar energy absorption, verifies the dynamic impact absorption capabilities of hedgehog spines and their candidacy as a structural model for engineered impact technology. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. THE RISK OF INJURY AND VEHICLE DAMAGE SEVERITY IN VEHICLE MISMATCHED SIDE IMPACT CRASHES IN BRITISH COLUMBIA

    Directory of Open Access Journals (Sweden)

    Ediriweera DESAPRIYA

    2005-01-01

    Full Text Available As occupant protection offered by new passenger vehicles has improved, there has been growing concern about the harm that some vehicle designs may inflict on occupants of other vehicles with which they collide. Preceding analyses of crash statistics have clearly demonstrated the incompatibility between passenger sedan cars (PS and pick-up trucks (PU involved in side impact crashes in British Columbia. A comparison of light truck and passenger car crashes in previous literature reveals that light truck vehicles inflict greater harm than passenger cars for a number of reasons including their greater weight, stiffer structure, and higher ride height. These features place occupants of passenger cars at a disadvantage should they be involved in a collision with a light truck vehicle. The injury risk for passenger sedan car occupants is greater than the risk for pick-up truck occupants in two-vehicle crashes (Odds Ratio (OR 1.87; 95% Confidence Interval (CI 1.38-2.52. In addition, the risk of vehicle damage severity was increased for passenger cars compared with pick-up trucks (write off vehicle-OR 5.35; 95% CI 3.75-7.63, severely damaged vehicles-OR 5.87; 95% CI 4.79–7.19, moderately damaged vehicles-OR 2.86; 95% CI 2.44–3.36. There is strong justification for injury prevention experts and policy makers to step up motor vehicle crash injury prevention advocacy by implementing evidence-based policies to reduce rates of injury as a result of passenger sedan cars and pick-up trucks involved in side impact crashes in the province of British Columbia.

  10. Transport company safety climate - the impact on truck driver behaviour and crash involvement

    OpenAIRE

    Sullman, Mark J. M.; Stephens A. N.; Pajo K.

    2017-01-01

    Objective: The present study investigated the relationships between safety climate and driving behavior and crash involvement. Methods: A total of 339 company-employed truck drivers completed a questionnaire that measured their perceptions of safety climate, crash record, speed choice, and aberrant driving behaviors (errors, lapses, and violations). Results: Although there was no direct relationship between the drivers' perceptions of safety climate and crash involvement, safety clima...

  11. Numerical simulation of several impact attenuator design for a formula student car

    Science.gov (United States)

    Sinaga, Farlian Rizky; Ubaidillah, Kurniawan, Krishna Eka; Fadhil, Muhamad Ivan; Cahyono, Sukmaji Indro; Idris, Muhamad Hafiz

    2018-02-01

    In the Formula Society of Automotive Engineer (SAE), safety is a vigorous factor. One of the safety components in the Formula SAE car is the impact attenuator. The purpose of this study is to get the impact attenuator design with the best ability to absorb kinetic energy from several existing designs, through numerical approaches, for estimating conditions against dynamic impacts. Material of impact attenuator use combination of aluminum and Zirconium G350. The simulation was caried out by crashing the impact with the rigid wall, to find the deformation that occurs and the energies are absorbed. The impact attenuator design to be simulated should be optimized to meet some parameters in the SAE Formula. The result of impact attenuator simulation should be able to absorb energy of 7350 joules at move 7 m/s and deformation at bulkhead less than 25.4 mm.

  12. Analytical research on impacting load of aircraft crashing upon moveable concrete target

    Science.gov (United States)

    Zhu, Tong; Ou, Zhuocheng; Duan, Zhuoping; Huang, Fenglei

    2018-03-01

    The impact load of an aircraft impact upon moveable concrete target was analyzed in this paper by both theoretical and numerical methods. The aircraft was simplified as a one dimensional pole and stress-wave theory was used to deduce the new formula. Furthermore, aiming to compare with previous experimental data, a numerical calculation based on the new formula had been carried out which showed good agreement with the experimental data. The approach, a new formula with particular numerical method, can predict not only the impact load but also the deviation between moveable and static concrete target.

  13. The impact of later trading hours for hotels on levels of impaired driver road crashes and driver breath alcohol levels.

    Science.gov (United States)

    Chikritzhs, Tanya; Stockwell, Tim

    2006-09-01

    To examine the impact of later trading hours for licensed hotels in Perth, Western Australia on levels of associated impaired driver road crashes and driver breath alcohol levels (BALs). Police data on the "last place of drinking" for impaired drivers involved in road crashes and their corresponding BALs were examined to identify those associated with Perth hotels between 1 July 1990 and 30 June 1997. During this period, 43 (23%) of the 186 hotels meeting study criteria were granted an Extended Trading Permit for 1 a.m. closing (ETP hotels), while the rest continued to close at midnight (non-ETP hotels). Time-series analyses employing multiple linear regressions were applied to determine whether an association existed between the introduction of extended trading and (i) monthly levels of impaired driver road crashes associated with ETP hotels and (ii) driver BALs associated with ETP hotels. Trends associated with non-ETP hotels were included as controls and possible confounders were considered. After controlling for the trend in crash rates associated with non-ETP hotels and the introduction of mobile police breath testing stations to Perth freeways, a significant increase in monthly crash rates for ETP hotels was found. This relationship was largely accounted for by higher volumes of high-alcohol content beer, wine and spirits purchased by ETP hotels. No relation was found between driver BALs and the introduction of ETPs. Late trading was associated with increased levels of impaired driver road crashes and alcohol consumption, particularly high-risk alcoholic beverages. Greater numbers of patrons and characteristics specific to clientele of hotels which applied for late trading hours (i.e. younger age, greater propensity to drunk-drive, preference for high-risk beverages) were suggested as having contributed to this increase.

  14. Crash sequence based risk matrix for motorcycle crashes.

    Science.gov (United States)

    Wu, Kun-Feng; Sasidharan, Lekshmi; Thor, Craig P; Chen, Sheng-Yin

    2018-04-05

    included in this study, weighted to represent 338,655 motorcyclists involved in traffic crashes in three years (2011-2013)(NHTSA, 2013). The top five most frequent and severe types of crash sequences were identified, accounting for 23 percent of all the motorcycle crashes included in the study, and they are (1) run-off-road crashes on the right, and hitting roadside objects, (2) cross-median crashes, and rollover, (3) left-turn oncoming crashes, and head-on, (4) crossing over (passing through) or turning into opposite direction at intersections, and (5) side-impacted. In addition to crash sequences, several other factors were also identified to have effects on crash severity: use of helmet, presence of horizontal curves, alcohol consumption, road surface condition, roadway functional class, and nighttime condition. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Bond graph modeling and simulation of impact dynamics of an automotive crash

    International Nuclear Information System (INIS)

    Khurshid, A.; Malik, M.A.

    2007-01-01

    With increase in the speeds of automotives, safety has become more and more important aspect of designers to care for. Thus, it is necessary to design the automobile body structure keeping in view all the safety requirements. As a result of the above-mentioned facts, in the recent years, the designers in making automotives more safe, more collision resistant and crash worthy have focused increased attention on designing automotives, which provides greater protection for the drivers and the passengers in case of an accident. Before a new model is launched into the market, a complete collision analysis is carried out to check the damage reduction capabilities and impact protection of automotives in case of an accident. Research in the field of automotive collision and impact analysis is a continuing activity and dedicated groups of engineers are devoting their full time and efforts for this. In this research work, the main attention is focused to provide a detailed knowledge about automotive collision analysis. The objective of this research paper is to develop an understanding of the automotive collision response. For this, we have done a simulation experiment in which, on a railroad, a train car is separated from a train and is moving towards two stationary train cars. By using a bond graph model of the system its state-space equations are found. Then by using software, the simulation is carried out. The bond graph method is a graphical presentation of the power flow using bonds. (author)

  16. The impact of pedestal turbulence and electron inertia on edge-localized-mode crashes

    Energy Technology Data Exchange (ETDEWEB)

    Xi, P. W. [FSC and State Key Lab of Nuclear Physics and Technology, Department of Physics, Peking University, Beijing 100871 (China); Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Xu, X. Q. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Diamond, P. H. [WCI Center for Fusion Theory, National Fusion Research Institute, Daejeon (Korea, Republic of); Center for Astrophysics and Space Sciences and Department of Physics, University of California San Diego, La Jolla, California 92093-0429 (United States)

    2014-05-15

    We demonstrate that the occurrence of Edge-Localized-Modes (ELM) crashes does not depend only on the linear peeling-ballooning threshold, but also relies on nonlinear processes. Wave-wave interaction constrains the growth time of a mode, thus inducing a shift in the criterion for triggering an ELM crash. An ELM crash requires the P-B growth rate to exceed a critical value γ>γ{sub c}, where γ{sub c} is set by 1/τ{sup ¯}{sub c}, and τ{sup ¯}{sub c} is the averaged mode phase coherence time. For 0<γ<γ{sub c}, P-B turbulence develops but drives enhanced turbulent transport. We also show that electron inertia dramatically changes the instability threshold when density is low. However, P-B turbulence alone cannot generate enough current transport to allow fast reconnection during an ELM crash.

  17. Crash characteristics and injury patterns of restrained front seat occupants in far-side impacts.

    Science.gov (United States)

    Yoganandan, Narayan; Arun, Mike W J; Halloway, Dale E; Pintar, Frank A; Maiman, Dennis J; Szabo, Aniko; Rudd, Rodney W

    2014-01-01

    The study was conducted to determine the association between vehicle-, crash-, and demographic-related factors and injuries to front seat far-side occupants in modern environments. Field data were obtained from the NASS-CDS database for the years 2009-2012. Inclusion factors included the following: adult restrained front outboard-seated occupants, no ejection or rollovers, and vehicle model years less than 10 years old at the time of crash. Far-side crashes were determined by using collision deformation classification. Injuries were scored using the Abbreviated Injury Scale (AIS). Injuries (MAIS 2+, MAIS 3+, M denotes maximum score) were examined based on demographics, change in velocity, vehicle type, direction of force, extent zone, collision partner, and presence of another occupant in the front seat. Only weighted data were used in the analysis. Injuries to the head and face, thorax, abdomen, pelvis, and upper and lower extremity regions were studied. Odds ratios and upper and lower confidence intervals were estimated from multivariate analysis. Out of 519,195 far-side occupants, 17,715 were MAIS 2+ and 4,387 were MAIS 3+ level injured occupants. The mean age, stature, total body mass, and body mass index (BMI) were 40.7 years, 1.7 m, 77.2 kg, and 26.8 kg/m2, respectively. Of occupants with MAIS 2+ injuries, 51% had head and 19% had thorax injuries. Of occupants with MAIS 3+ injuries, 50% had head and 69% had thorax injuries. The cumulative distribution of changes in velocities at the 50th percentile for the struck vehicle for all occupants and occupants with MAIS 2+ and MAIS 3+ injuries were 19, 34, and 42 km/h, respectively. Furthermore, 73% of MAIS 2+ injuries and 86% of MAIS 3+ injuries occurred at a change in velocity of 24 km/h or greater. Odds of sustaining MAIS 2+ and MAIS 3+ injuries increased with each unit increase in change in velocity, stature, and age, with one exception. Odds of sustaining injuries were higher with the presence of an occupant in

  18. The RID2 biofidelic rear impact dummy: a pilot study using human subjects in low speed rear impact full scale crash tests.

    Science.gov (United States)

    Croft, Arthur C; Philippens, Mathieu M G M

    2007-03-01

    Human subjects and the recently developed RID2 rear impact crash test dummy were exposed to a series of full scale, vehicle-to-vehicle crash tests. To evaluate the biofidelity of the RID2 anthropometric test dummy on the basis of calculated neck injury criterion (NIC) values by comparing these values to those obtained from human subjects exposed in the very same crashes. The widely used and familiar hybrid III dummy has been said to lack biofidelity in the special application of low speed rear impact crashes. Several attempts have been made to modify this dummy with only marginal success. Two completely new dummies have been developed; the BioRID and the RID2. Neither have been tested under real world crash boundary conditions in side-by-side comparisons with live human subjects. Volunteer subjects, including a 50th percentile male, a 95th percentile male, and a 50th percentile female, were placed in the driver's seat of a vehicle and subjected to a series of three low speed rear impact crashes each. The RID2 dummy, which is modeled after a 50th percentile male, was placed in the passenger seat in each case. Both subjects and dummy were fully instrumented and acceleration-time histories were recorded. From this data, velocities of the heads and torsos were determined and both were used to calculate the NIC values for both crash test subjects and the RID2. The RID2 demonstrated generally higher head accelerations and NIC values than those of the human subjects. Most of the observed variations might be explained on the basis of differing head restraint geometry, posture, and body size. The RID2 NIC values compared most favorably with those of the 50th percentile male subject. For the whole group, the correlations between RID2 and human subjects did not reach statistical significance. The small number of test subjects and crash tests limited the statistical power of this pilot study, and the correlation between the RID2 and human subject NIC values were not

  19. Effect of weight, height and BMI on injury outcome in side impact crashes without airbag deployment.

    Science.gov (United States)

    Pal, Chinmoy; Tomosaburo, Okabe; Vimalathithan, K; Jeyabharath, M; Muthukumar, M; Satheesh, N; Narahari, S

    2014-11-01

    A comprehensive analysis is performed to evaluate the effect of weight, height and body mass index (BMI) of occupants on side impact injuries at different body regions. The accident dataset for this study is based on the National Automotive Sampling System-Crashworthiness Data System (NASS-CDS) for accident year 2000-08. The mean BMI values for driver and front passenger are estimated from all types of crashes using NASS database, which clearly indicates that mean BMI has been increasing over the years in the USA. To study the effect of BMI in side impact injuries, BMI was split into three groups namely (1) thin (BMI30). For more clear identification of the effect of BMI in side impact injuries, a minimum gap of three BMI is set in between each adjacent BMI groups. Car model years from MY1995-1999 to MY2000-2008 are chosen in order to identify the degree of influence of older and newer generation of cars in side impact injuries. Impact locations particularly side-front (F), side-center (P) and side-distributed (Y) are chosen for this analysis. Direction of force (DOF) considered for both near side and far side occupants are 8 o'clock, 9 o'clock, 10 o'clock and 2 o'clock, 3 o'clock and 4 o'clock respectively. Age <60 years is also one of the constraints imposed on data selection to minimize the effect of bone strength on the occurrence of occupant injuries. AIS2+ and AIS3+ injury risk in all body regions have been plotted for the selected three BMI groups of occupant, delta-V 0-60kmph, two sets (old and new) of car model years. The analysis is carried with three approaches: (a) injury risk percentage based on simple graphical method with respect to a single variable, (b) injury distribution method where the injuries are marked on the respective anatomical locations and (c) logistic regression, a statistical method, considers all the related variables together. Lower extremity injury risk appears to be high for thin BMI group. It is found that BMI does not have much

  20. Local impact effects on concrete target due to missile: An empirical and numerical approach

    International Nuclear Information System (INIS)

    Ranjan, Rajiv; Banerjee, Sauvik; Singh, R.K.; Banerji, Pradipta

    2014-01-01

    Highlights: • Local impact effect of hard missile on reinforced concrete targets has been studied. • Review of empirical formulation for predicting local response carried out. • Numerical simulation of experimental test of Kojima (1991) carried out. • Divergence of FE results with those obtained using emperical formulations. • Close match of numerical simulation results with experimental data. - Abstract: Concrete containment walls and internal concrete barrier walls of a Nuclear Power Plant safety related structures are often required to be designed for externally and internally generated missiles. Potential missiles include external extreme wind generated missiles, aircraft crash and internal accident generated missiles such as impact due to turbine blade failure and steel pipe missiles resulting from pipe break. The objective of the present paper is to compare local missile impact effects on reinforced concrete target using available empirical formulations with those obtained using LS-DYNA numerical simulation. The use of numerical simulations for capturing the transient structural response has become increasingly used for structural design against impact loads. They overcome the limits of applicability of the empirical formulae and also provide information on stress and deformation fields, which may be used to improve the resistance of the concrete. Finite element (FE) analyses of an experimental impact problem reported by Kojima (1991) are carried out that are able to capture the missile impact effects; in terms of local and global damage. The continuous surface cap model has been used for modelling concrete behaviour. A range of missile velocity has been considered to simulate local missile impact phenomenon and modes of failure and to capture the concrete response from elastic to plastic fracture. A comparison is then made between the empirical formulations, numerical simulation results, and available experimental results of slab impact tests

  1. Impact of the 1994 alcohol production and sales deregulation policy on traffic crashes and fatalities in Japan.

    Science.gov (United States)

    Desapriya, Ediriweera; Fujiwara, Takeo; Dutt, Namrata; Arason, Neil; Pike, Ian

    2012-09-01

    . Many studies have demonstrated a strong relationship between alcohol availability and traffic crashes involving alcohol-impaired drivers. The present analysis focuses on the evaluation of the impact of alcohol availability on the Japanese population by comparing fatal and nonfatal motor vehicle crash rates before and after implementation of the alcohol deregulation policy in 1994. Participants and method. Poisson regression with robust standard error was used to model the before-to-after change in incidence rate ratios (IRRs) in the population. To control for potential confounders, per capita alcohol consumption, unemployment rate, and vehicle miles travelled (VMT) were also added to the model. The exponents of the fitted coefficients are equivalent to the IRRs. . Implementation of the policy deregulating alcohol sales and production did not appear to increase traffic fatalities and other traffic crashes in Japan. In the overall study results, nighttime fatalities were reduced statistically significantly by 6% since the implementation of the alcohol deregulation policy in 1994. Discussion. Contrary to previous research, the findings of this study demonstrated lower rates of fatalities and higher compliance with alcohol-related driving legislation. Further well-designed, nonaligned studies on alcohol availability and traffic fatalities in other countries are urgently needed.

  2. Brace for impact! A thesis on medical care following an airplane crash

    NARCIS (Netherlands)

    Postma, I.L.E.

    2014-01-01

    In this thesis the events and management of a mass casualty incident (MCI) of an airplane crash are studied from a medical point of view. The incident is broken down into areas that are applicable to other MCIs. it is believed that the detailed study of an exceptional event can provide vital

  3. "Crashing the gates" - selection criteria for television news reporting of traffic crashes.

    Science.gov (United States)

    De Ceunynck, Tim; De Smedt, Julie; Daniels, Stijn; Wouters, Ruud; Baets, Michèle

    2015-07-01

    This study investigates which crash characteristics influence the probability that the crash is reported in the television news. To this purpose, all news items from the period 2006-2012 about traffic crashes from the prime time news of two Belgian television channels are linked to the official injury crash database. Logistic regression models are built for the database of all injury crashes and for the subset of fatal crashes to identify crash characteristics that correlate with a lower or higher probability of being reported in the news. A number of significant biases in terms of crash severity, time, place, types of involved road users and victims' personal characteristics are found in the media reporting of crashes. More severe crashes are reported in the media more easily than less severe crashes. Significant fluctuations in media reporting probability through time are found in terms of the year and month in which the crash took place. Crashes during week days are generally less reported in the news. The geographical area (province) in which the crash takes place also has a significant impact on the probability of being reported in the news. Crashes on motorways are significantly more represented in the news. Regarding the age of the involved victims, a clear trend of higher media reporting rates of crashes involving young victims or young fatalities is observed. Crashes involving female fatalities are also more frequently reported in the news. Furthermore, crashes involving a bus have a significantly higher probability of being reported in the news, while crashes involving a motorcycle have a significantly lower probability. Some models also indicate a lower reporting rate of crashes involving a moped, and a higher reporting rate of crashes involving heavy goods vehicles. These biases in media reporting can create skewed perceptions in the general public about the prevalence of traffic crashes and eventually may influence people's behaviour. Copyright © 2015

  4. Nonlinear analysis of commercial aircraft impact on a reactor building—Comparison between integral and decoupled crash simulation

    Energy Technology Data Exchange (ETDEWEB)

    Siefert, A., E-mail: siefert@woelfel.de; Henkel, F.O.

    2014-04-01

    Since 9/11, the crash of a commercial aeroplane on the reactor building of a nuclear power plant is a realistic design scenario. Before that the structural behaviour under a crash of a military plane was investigated by a procedure using load-time functions (Riera, 1968). Thereby, the computation of the load-time-function was based on a conceptional model considering the main stiffness parts and masses by discrete elements. With respect to the homogeneous structural set-up of a military plane, the application of this model and the derived load-time-function applied as lumped load case seems very feasible. Contrary thereto the structural set-up of a commercial aeroplane, with e.g. the high mass concentration of the turbine or the high stiffness of the wing box compared to other parts, is different. This can be counteracted by using a more detailed finite element (FE) model for the computation of the load-time-function and by dividing the load case for the reactor building in different main load zones. Although this represents a more detailed investigation, the procedure of using a load-time-function still has the disadvantage to separate the real scenario into two steps. Thereby, the direct interaction between the structure and the aeroplane including all softening effects due to material respectively structural compliances is neglected. This leads to the general conclusion that by applying load-time-functions the results are conservative compared to the real behaviour. Due to the increased capabilities of numerical software solutions it is also possible nowadays to carry out integral crash simulations, combining all effects within one simulation. Compared to the procedure of using load-time-functions, the numerical complexity and therefore the amount of work for this integral method are increased. Within this paper both procedures (load-time function by detailed FE-model and the integral method) are exemplarily compared to each other by a crash analysis of an

  5. Nonlinear analysis of commercial aircraft impact on a reactor building—Comparison between integral and decoupled crash simulation

    International Nuclear Information System (INIS)

    Siefert, A.; Henkel, F.O.

    2014-01-01

    Since 9/11, the crash of a commercial aeroplane on the reactor building of a nuclear power plant is a realistic design scenario. Before that the structural behaviour under a crash of a military plane was investigated by a procedure using load-time functions (Riera, 1968). Thereby, the computation of the load-time-function was based on a conceptional model considering the main stiffness parts and masses by discrete elements. With respect to the homogeneous structural set-up of a military plane, the application of this model and the derived load-time-function applied as lumped load case seems very feasible. Contrary thereto the structural set-up of a commercial aeroplane, with e.g. the high mass concentration of the turbine or the high stiffness of the wing box compared to other parts, is different. This can be counteracted by using a more detailed finite element (FE) model for the computation of the load-time-function and by dividing the load case for the reactor building in different main load zones. Although this represents a more detailed investigation, the procedure of using a load-time-function still has the disadvantage to separate the real scenario into two steps. Thereby, the direct interaction between the structure and the aeroplane including all softening effects due to material respectively structural compliances is neglected. This leads to the general conclusion that by applying load-time-functions the results are conservative compared to the real behaviour. Due to the increased capabilities of numerical software solutions it is also possible nowadays to carry out integral crash simulations, combining all effects within one simulation. Compared to the procedure of using load-time-functions, the numerical complexity and therefore the amount of work for this integral method are increased. Within this paper both procedures (load-time function by detailed FE-model and the integral method) are exemplarily compared to each other by a crash analysis of an

  6. Comparison of Test and Finite Element Analysis for Two Full-Scale Helicopter Crash Tests

    Science.gov (United States)

    Annett, Martin S.; Horta,Lucas G.

    2011-01-01

    Finite element analyses have been performed for two full-scale crash tests of an MD-500 helicopter. The first crash test was conducted to evaluate the performance of a composite deployable energy absorber under combined flight loads. In the second crash test, the energy absorber was removed to establish the baseline loads. The use of an energy absorbing device reduced the impact acceleration levels by a factor of three. Accelerations and kinematic data collected from the crash tests were compared to analytical results. Details of the full-scale crash tests and development of the system-integrated finite element model are briefly described along with direct comparisons of acceleration magnitudes and durations for the first full-scale crash test. Because load levels were significantly different between tests, models developed for the purposes of predicting the overall system response with external energy absorbers were not adequate under more severe conditions seen in the second crash test. Relative error comparisons were inadequate to guide model calibration. A newly developed model calibration approach that includes uncertainty estimation, parameter sensitivity, impact shape orthogonality, and numerical optimization was used for the second full-scale crash test. The calibrated parameter set reduced 2-norm prediction error by 51% but did not improve impact shape orthogonality.

  7. Two-leaf wall structures under 'soft' impact load - aircraft crash

    International Nuclear Information System (INIS)

    Eibl, J.; Block, K.

    1982-01-01

    The article describes a mechanical model with which the load conditions associated with aircraft crash on a two-leaf wall or roof structure can be analysed quite simply. The necessary assumptions for the material behaviour governing the contact of the two slabs and, in general, the maximum limit deformations of reinforced concrete slabs are more particularly dealt with. Treating the problem the authors make use, inter alia, of some of their own experimental results. (orig.)

  8. Pedestrian Crashes

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — This data set maps the locations of crashes involving pedestrians in the Chapel Hill Region of North Carolina.The data comes from police-reported bicycle-motor...

  9. Bicycle Crashes

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — This data set maps the locations of crashes involving bicyclists in the Chapel Hill Region of North Carolina.The data comes from police-reported bicycle-motor...

  10. Airplane crash

    International Nuclear Information System (INIS)

    Brunner, P.

    1975-01-01

    In May, 1974, a severe airplane crash occurred near Springfield, llinois; the crew of three and a courier were killed. The plane was carrying a large container of controlled water with a slight amount of 60 Co. A survey of the crash site by Air Force detectives and the radiological assistance team from Wright--Patterson Air Force Base indicated no radioactivity. Experiences of the incident were used to develop guidelines for future emergency preparedness

  11. Simulation of crash tests for high impact levels of a new bridge safety barrier

    Science.gov (United States)

    Drozda, Jiří; Rotter, Tomáš

    2017-09-01

    The purpose is to show the opportunity of a non-linear dynamic impact simulation and to explain the possibility of using finite element method (FEM) for developing new designs of safety barriers. The main challenge is to determine the means to create and validate the finite element (FE) model. The results of accurate impact simulations can help to reduce necessary costs for developing of a new safety barrier. The introductory part deals with the creation of the FE model, which includes the newly-designed safety barrier and focuses on the application of an experimental modal analysis (EMA). The FE model has been created in ANSYS Workbench and is formed from shell and solid elements. The experimental modal analysis, which was performed on a real pattern, was employed for measuring the modal frequencies and shapes. After performing the EMA, the FE mesh was calibrated after comparing the measured modal frequencies with the calculated ones. The last part describes the process of the numerical non-linear dynamic impact simulation in LS-DYNA. This simulation was validated after comparing the measured ASI index with the calculated ones. The aim of the study is to improve professional public knowledge about dynamic non-linear impact simulations. This should ideally lead to safer, more accurate and profitable designs.

  12. Evaluating impacts of different longitudinal driver assistance systems on reducing multi-vehicle rear-end crashes during small-scale inclement weather.

    Science.gov (United States)

    Li, Ye; Xing, Lu; Wang, Wei; Wang, Hao; Dong, Changyin; Liu, Shanwen

    2017-10-01

    Multi-vehicle rear-end (MVRE) crashes during small-scale inclement (SSI) weather cause high fatality rates on freeways, which cannot be solved by traditional speed limit strategies. This study aimed to reduce MVRE crash risks during SSI weather using different longitudinal driver assistance systems (LDAS). The impact factors on MVRE crashes during SSI weather were firstly analyzed. Then, four LDAS, including Forward collision warning (FCW), Autonomous emergency braking (AEB), Adaptive cruise control (ACC) and Cooperative ACC (CACC), were modeled based on a unified platform, the Intelligent Driver Model (IDM). Simulation experiments were designed and a large number of simulations were then conducted to evaluate safety effects of different LDAS. Results indicate that the FCW and ACC system have poor performance on reducing MVRE crashes during SSI weather. The slight improvement of sight distance of FCW and the limitation of perception-reaction time of ACC lead the failure of avoiding MVRE crashes in most scenarios. The AEB system has the better effect due to automatic perception and reaction, as well as performing the full brake when encountering SSI weather. The CACC system has the best performance because wireless communication provides a larger sight distance and a shorter time delay at the sub-second level. Sensitivity analyses also indicated that the larger number of vehicles and speed changes after encountering SSI weather have negative impacts on safety performances. Results of this study provide useful information for accident prevention during SSI weather. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. A Bayesian analysis of the impact of post-crash care on road mortality in Sub-Saharan African countries

    Directory of Open Access Journals (Sweden)

    Wonmongo Lacina Soro

    2017-10-01

    Full Text Available Sub-Saharan Africa is undergoing a disproportionate road tragedy compared to its motorization rate and road network density. Most of the road traffic deaths occur in the pre-hospital phase. Yet, more than half of the African countries do not possess formal pre-hospital care system. This study assesses the potential impact of post-crash care on road mortality in 23 Sub-Saharan African countries. A panel Bayesian normal linear regression with normally distributed non-informative priors is used to fit the data set covering the time period 2001–2010. The post-crash care system is proxied by the estimated share of seriously injured transported by ambulance, and three binary variables indicating the existence of emergency access telephone services and emergency training for doctors and nurses. The findings suggest a negative correlation between the road mortality rate and the estimated share of seriously injured transported by ambulance, the emergency access telephone services and the emergency training for doctors. A positive relation is unexpectedly observed for the emergency training for nurses. Other regressors such as the Gross Domestic Product per capita and populations in the age range 15–64 years are related to higher fatality rates while the length of the road network and life expectancy are linked to decreasing fatality rates.

  14. Biomechanical Response and Behavior of Users under Emergency Buffer Crash

    Directory of Open Access Journals (Sweden)

    R. Miralbes

    2013-01-01

    Full Text Available This paper aims to study the biomechanical effects on elevator users and the injuries sustained should an elevator crash happen. The analysis will focus on buffer impact, signaling that the earlier mentioned buffer is usually located at the bottom of the pit. In order to carry out this analysis, a numerical technique based on finite element method will be used, while elevator users will be simulated by means of automotive dummies. Two crash factors will be studied, namely, location of dummy and fall velocity. The analysis criteria will be damages sustained by the dummy, based on biomechanical index such as HIC, CSI, forces, and accelerations.

  15. Calibration of Airframe and Occupant Models for Two Full-Scale Rotorcraft Crash Tests

    Science.gov (United States)

    Annett, Martin S.; Horta, Lucas G.; Polanco, Michael A.

    2012-01-01

    Two full-scale crash tests of an MD-500 helicopter were conducted in 2009 and 2010 at NASA Langley's Landing and Impact Research Facility in support of NASA s Subsonic Rotary Wing Crashworthiness Project. The first crash test was conducted to evaluate the performance of an externally mounted composite deployable energy absorber under combined impact conditions. In the second crash test, the energy absorber was removed to establish baseline loads that are regarded as severe but survivable. Accelerations and kinematic data collected from the crash tests were compared to a system integrated finite element model of the test article. Results from 19 accelerometers placed throughout the airframe were compared to finite element model responses. The model developed for the purposes of predicting acceleration responses from the first crash test was inadequate when evaluating more severe conditions seen in the second crash test. A newly developed model calibration approach that includes uncertainty estimation, parameter sensitivity, impact shape orthogonality, and numerical optimization was used to calibrate model results for the second full-scale crash test. This combination of heuristic and quantitative methods was used to identify modeling deficiencies, evaluate parameter importance, and propose required model changes. It is shown that the multi-dimensional calibration techniques presented here are particularly effective in identifying model adequacy. Acceleration results for the calibrated model were compared to test results and the original model results. There was a noticeable improvement in the pilot and co-pilot region, a slight improvement in the occupant model response, and an over-stiffening effect in the passenger region. This approach should be adopted early on, in combination with the building-block approaches that are customarily used, for model development and test planning guidance. Complete crash simulations with validated finite element models can be used

  16. Factors affecting pelvic and thoracic forces in near-side impact crashes: a study of US-NCAP, NASS, and CIREN data.

    Science.gov (United States)

    Tencer, Allan F; Kaufman, Robert; Mack, Christopher; Mock, Charles

    2005-03-01

    The goal of this study was to identify variables related to vehicle design which are associated with pelvic and thoracic accelerations as measured by the driver's (near side) crash dummy during new car assessment program (NCAP) testing of motor vehicles. Vehicle specific parameters were analyzed using NCAP side impact test results. Data from national automotive sampling system, crashworthiness data system (NASS-CDS) and crash injury research and engineering network (CIREN) (both National Highway Traffic Safety Administration (NHTSA) injury databases) were assessed to confirm NCAP test observations. In addition, door armrest stiffness measurements were performed using a mechanical tester on a sample of 40 vehicles. NCAP data showed that of 10 variables tested using multiple linear regression, vehicle weight and door crush correlated with pelvic acceleration of the driver's crash dummy (overall, r2=0.58, p=0.002, n=165). For thoracic trauma index (TTI) vehicle weight and peak door velocity correlated, significantly (overall, r2=0.41, p=0.03, n=165). Mean TTI was 63.7 g with no side airbag (n=108) and 55.6 g with a thoracic side airbag (n=54), p=0.01. The mean vehicle weight and door crush between airbag and no airbag groups were not significantly different. NASS-CDS data demonstrated a direct relationship between increased door crush and increased abbreviated injury score (AIS). CIREN data showed that occupants who sustained pelvic injuries had a median AIS of 3 with 24.9 cm of door crush, with abdominal injuries, a median AIS of 3 and 30 cm of crush, and with thoracic injuries, a median AIS of 4 and 34 cm of door crush. In addition, the frequency of bilateral pelvic injuries was significantly higher for subjects in CIREN crashes who were in a vehicle with a center console, but only if door intrusion was greater than 15 cm. This information may be useful in design of vehicles with greater protection in side impact crashes.

  17. Reporting on cyclist crashes in Australian newspapers.

    Science.gov (United States)

    Boufous, Soufiane; Aboss, Ahmad; Montgomery, Victoria

    2016-10-01

    To assess information on cyclist crashes reported in Australian newspapers. The Factiva news archive was searched for articles on cyclist crashes published in major Australian newspapers between 2010 and 2013. Information on the circumstances of cyclist crashes were extracted and coded. A total of 160 cyclist crashes were covered by 198 newspaper articles, with 44% of crashes resulting in cyclist fatalities. Crashes reported by more than one newspaper were more likely to involve public figures or protracted court cases. Individual characteristics of cyclists as well as the location of the crash were reported for more than 80% of crashes. The road user at fault was reported for more than half of crashes. In contrast, information on helmet use, alcohol and cycling lanes was mentioned for only about 10% of crashes. Fewer than one in five articles mentioned prevention strategies including education campaigns, legislative and infrastructure changes. Australian newspapers tend to focus on the most dramatic and more 'newsworthy' aspects of cyclist crashes. Cycling advocates need to work with journalists to improve the quality of this coverage. Better communication between cycling advocates and journalists is likely to have a positive impact on the safety and the uptake of cycling in the community. © 2016 Public Health Association of Australia.

  18. Predicting motorcycle crash injury severity using weather data and alternative Bayesian multivariate crash frequency models.

    Science.gov (United States)

    Cheng, Wen; Gill, Gurdiljot Singh; Sakrani, Taha; Dasu, Mohan; Zhou, Jiao

    2017-11-01

    Motorcycle crashes constitute a very high proportion of the overall motor vehicle fatalities in the United States, and many studies have examined the influential factors under various conditions. However, research on the impact of weather conditions on the motorcycle crash severity is not well documented. In this study, we examined the impact of weather conditions on motorcycle crash injuries at four different severity levels using San Francisco motorcycle crash injury data. Five models were developed using Full Bayesian formulation accounting for different correlations commonly seen in crash data and then compared for fitness and performance. Results indicate that the models with serial and severity variations of parameters had superior fit, and the capability of accurate crash prediction. The inferences from the parameter estimates from the five models were: an increase in the air temperature reduced the possibility of a fatal crash but had a reverse impact on crashes of other severity levels; humidity in air was not observed to have a predictable or strong impact on crashes; the occurrence of rainfall decreased the possibility of crashes for all severity levels. Transportation agencies might benefit from the research results to improve road safety by providing motorcyclists with information regarding the risk of certain crash severity levels for special weather conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. A round robin on numerical analyses for impact problems

    International Nuclear Information System (INIS)

    Yagawa, G.; Ohtsubo, H.; Toi, Y.; Aizawa, T.; Ikushima, T.

    1984-01-01

    In this paper, two types of numerical tests are performed using several general- and special-purpose computer codes to understand dynamic behaviors of CASK for nuclear fuel shipping under the impact onto rigid floor due to the accidental fall from the height of 9 m. Discussed are the efficiency and the validity of direct time integration schemes and the effects of material and geometric nonlinearities and contact conditions on the numerical data. (orig.)

  20. Exploring the impacts of safety culture on immigrants' vulnerability in non-motorized crashes: a cross-sectional study.

    Science.gov (United States)

    Chen, Cynthia; Lin, Haiyun; Loo, Becky P Y

    2012-02-01

    Pedestrians and cyclists are a vulnerable group of road users. Immigrants are disproportionally represented in pedestrian and cyclist crashes. We postulate that the mismatch in safety culture between countries of their origin and the U.S.A. contribute to their vulnerability in pedestrian and cyclist crashes. Over time, the differences may disappear and immigrants' traffic behavior gravitates toward those of native-borns. We describe this process as safety assimilation. Using the pedestrian and cyclist crash database in New York City between 2001 and 2003, we examined the effects of foreign-born population, their countries of origin, and time of entry into the USA on census tract-level pedestrian and cyclist crashes. We find that neighborhoods with a higher concentration of immigrants, especially those from Latin America, Eastern Europe, and Asia, have more crashes. Our results also exhibit a pattern of the hypothesized safety assimilation process. The study suggests a higher level of vulnerability of immigrants to pedestrian and cyclist crashes. We propose that targeted policies and programs need to be developed for immigrants of different countries of origin.

  1. Numerical analysis of pipe impact on reinforced concrete structures

    International Nuclear Information System (INIS)

    Prinja, N.K.

    1990-01-01

    This paper presents the methodology and the results of numerical analyses carried out by using the computer code DYNA3D to analyse pipe impacts on a reinforced concrete slab, a floor beam and a column. Modelling techniques employed to represent various features of typical reinforced concrete (RC) structures and the details of a soil and crushable foam type of material model used to represent concrete material behaviour are described. The results show that a reasonable prediction of global behaviour of reinforced concrete structures under impact loading can be obtained by this numerical method. (author)

  2. The psychological impact of traffic injuries sustained in a road crash by bicyclists: A prospective study

    NARCIS (Netherlands)

    Craig, Ashley; Elbers, N.A.; Jagnoor, Jagnoor; Gopinath, Bamini; Kifley, Annette; Dinh, Michal; Pozzato, Ilaria; Ivers, Rebecca; Nicholas, Michael; Cameron, Ian

    2017-01-01

    Objective: The objective of this study was to investigate the psychological impact of traffic injuries in bicyclists (cyclists) in comparison to car occupants who also sustained traffic injuries. Factors predictive of elevated psychological distress were also investigated. Methods: An inception

  3. Numerical simulation of small scale soft impact tests

    International Nuclear Information System (INIS)

    Varpasuo, Pentti

    2008-01-01

    This paper describes the small scale soft missile impact tests. The purpose of the test program is to provide data for the calibration of the numerical simulation models for impact simulation. In the experiments, both dry and fluid filled missiles are used. The tests with fluid filled missiles investigate the release speed and the droplet size of the fluid release. This data is important in quantifying the fire hazard of flammable liquid after the release. The spray release velocity and droplet size are also input data for analytical and numerical simulation of the liquid spread in the impact. The behaviour of the impact target is the second investigative goal of the test program. The response of reinforced and pre-stressed concrete walls is studied with the aid of displacement and strain monitoring. (authors)

  4. Structures under crash and impact continuum mechanics, discretization and experimental characterization

    CERN Document Server

    Hiermaier, Stefan

    2007-01-01

    Required reading for those in the relevant areas of work, this book examines the testing and modeling of materials and structures under dynamic loading conditions.Readers get an in-depth analysis of the current mathematical modeling and simulation tools available for a variety of materials, alongside discussions of the benefits and limitations these tools pose in industrial design.The models discussed are also available in commercial codes such as LS-DYNA and AOTODYN.Following a logical and well organized structure, this volume uniquely combines experimental procedures with numerical simulatio

  5. The ideal flip-through impact: experimental and numerical investigation

    DEFF Research Database (Denmark)

    Bredmose, Henrik; Hunt-Raby, A.; Jayaratne, R.

    2010-01-01

    Results from a physical experiment and a numerical computation are compared for a flip-through type wave impact on a vertical face, typical of a seawall or breakwater. The physical wave was generated by application of the focused-wave group technique to the amplitudes of a JONSWAP spectrum, with ...

  6. Structural evaluation of spent nuclear fuel storage facilities under aircraft crash impact (2). Horizontal impact test onto reduced scale metal cask due to aircraft engine missile

    International Nuclear Information System (INIS)

    Namba, Kosuke; Shirai, Koji; Saegusa, Toshiari

    2009-01-01

    In this study, to confirm the sealing performance of a metal cask subjected to impact force due to possible commercial aircraft crash against a spent fuel storage facility, the horizontal impact test was carried out. In the test, an aircraft engine missile with a speed of 57.3 m/s attacked the reduced scale metal cask containing helium gas, which stands vertically. Then the leak rate and sliding displacement of the lid were measured. The leak rate increased rapidly and reached to 4.0 x 10 -6 Pa·m 3 /sec. After that, the leak rate decreased slowly and converged to 1.0x10 -6 Pa·m 3 /sec after 20 hours from the impact test. The leak rate of a full scale cask was evaluated using that of reduced scale cask obtained by the test. Then the leak rate of the full scale cask was 3.5x10 -5 Pa·m 3 /sec. This result showed that the sealing performance of the full scale metal cask would not be affected immediately by the horizontal impact of the aircraft engine with a speed of 57.3 m/s. (author)

  7. Numerical simulation of tornado-borne missile impact

    International Nuclear Information System (INIS)

    Tu, D.K.; Murray, R.C.

    1977-01-01

    The feasibility of using a finite element procedure to examine the impact phenomenon of a tornado-borne missile impinging on a reinforced concrete barrier was assessed. The major emphasis of this study was to simulate the impact of a nondeformable missile. Several series of simulations were run, using an 8-in.-dia steel slug as the impacting missile. The numerical results were then compared with experimental field tests and empirical formulas. The work is in support of tornado design practices for fuel reprocessing and fuel fabrication plants

  8. Seat belt use to save face: impact on drivers' body region and nature of injury in motor vehicle crashes.

    Science.gov (United States)

    Han, Guang-Ming; Newmyer, Ashley; Qu, Ming

    2015-01-01

    Seat belt use is the single most effective way to save lives and reduce injuries in motor vehicle crashes. However, some case reports described seat belt use as a double-edged sword because some injuries are related to seat belt use in motor vehicle crashes. To comprehensively understand the effects of seat belt use, we systemically investigated the association between seat belt use and injuries based on anatomic body region and type of injury in drivers involved in motor vehicle crashes. The injury information was obtained by linking crash reports with hospital discharge data and categorized by using the diagnosis codes based on the Barell injury diagnosis matrix. A total of 10,479 drivers (≥15 years) in passenger vehicles involved in motor vehicle crashes from 2006 to 2011 were included in this study. Seat belt use significantly reduced the proportions of traumatic brain injury (10.4% non-seat belt; 4.1% seat belt) and other head, face, and neck injury (29.3% non-seat belt; 16.6% seat belt) but increased the proportion of spine: thoracic to coccyx injury (17.9% non-seat belt; 35.5% seat belt). Although the proportion of spine: thoracic to coccyx injury was increased in drivers with seat belt use, the severity of injury was decreased, such as fracture (4.2% with seat belt use; 22.0% without seat belt use). Furthermore, the total medical charges decreased due to the change of injury profiles in drivers with seat belt use from a higher percentage of fractures (average cost for per case $26,352) to a higher percentage of sprains and/or strains ($1,897) with spine: thoracic to coccyx injury. This study provide a comprehensive picture for understanding the protective effect of seat belt use on injuries based on anatomic body region and type of injury in drivers involved in motor vehicle crashes.

  9. Numerical study of droplet impact and rebound on superhydrophobic surface

    Science.gov (United States)

    Cai, Xuan; Wu, Yanchen; Woerner, Martin; Frohnapfel, Bettina

    2017-11-01

    Droplet impact and rebound on superhydrophobic surface is an important process in many applications; among them are developing self-cleaning or anti-icing materials and limiting liquid film formation of Diesel Exhaust Fluid (DEF) in exhaust gas pipe. In the latter field, rebound of DEF droplet from wall is desired as an effective mean for avoiding or reducing unwanted solid deposition. Our goal is to numerically study influence of surface wettability on DEF droplet impact and rebound behavior. A phase-field method is chosen, which was implemented in OpenFOAM by us and validated for wetting-related interfacial flow problems. In the present contribution we first numerically reproduce relevant experimental studies in literature, to validate the code for droplet impact and rebound problem. There we study droplet-surface contact time, maximum/instantaneous spreading factor and droplet shape evolution. Our numerical results show good agreement with experimental data. Next we investigate for DEF droplets the effects of diameter, impact velocity and surface wettability on rebound behavior and jumping height. Based on Weber number and equilibrium contact angle, two regimes are identified. We show that surface wettability is a deciding factor for achieving rebound event. This work is supported by Foundation ``Friedrich-und-Elisabeth Boysen Stiftung fuer Forschung und Innovation'' (BOY-127-TP1).

  10. Numerical simulations for impact damage detection in composites using vibrothermography

    International Nuclear Information System (INIS)

    Pieczonka, L J; Uhl, T; Szwedo, M; Staszewski, W J; Aymerich, F

    2010-01-01

    Composite materials are widely used in many engineering applications due to their high strength-to-weight ratios. However, it is well known that composites are susceptible to impact damage. Detection of impact damage is an important issue in maintenance of composite structures. Various non-destructive image-based techniques have been developed for damage detection in composite materials. These include vibrothermography that detects surface temperature changes due to heating associated with frictional energy dissipation by damage. In the present paper numerical simulations are used to investigate heat generation in a composite plate with impact damage in order to support damage detection analysis with vibrothermography. Explicit finite elements are used to model ultrasonic wave propagation in the damaged plate. Simulated delamination and cracks induce frictional heating in the plate. Coupled thermo-mechanical simulations are performed in high frequencies using commercial LS-Dyna finite element code. Very good qualitative agreement between measurements and simulations has been obtained. The area of increased temperature corresponds very well with the damaged area in both experiments and simulations. Numerical model has to be further refined in order to quantitatively match the experiments. The main issues of concern are frictional and thermal properties of composites. The final goal of these research efforts is to predict damage detection sensitivity of vibrothermography in real engineering applications based on numerical models.

  11. Numerical simulation of impact tests on reinforced concrete beams

    International Nuclear Information System (INIS)

    Jiang, Hua; Wang, Xiaowo; He, Shuanhai

    2012-01-01

    Highlights: ► Predictions using advanced concrete model compare well with the impact test results. ► Several important behavior of concrete is discussed. ► Two mesh ways incorporating rebar into concrete mesh is also discussed. ► Gives a example of using EPDC model and references to develop new constitutive models. -- Abstract: This paper focuses on numerical simulation of impact tests of reinforced concrete (RC) beams by the LS-DYNA finite element (FE) code. In the FE model, the elasto-plastic damage cap (EPDC) model, which is based on continuum damage mechanics in combination with plasticity theory, is used for concrete, and the reinforcement is assumed to be elasto-plastic. The numerical results compares well with the experimental values reported in the literature, in terms of impact force history, mid-span deflection history and crack patterns of RC beams. By comparing the numerical and experimental results, several important behavior of concrete material is investigated, which includes: damage variable to describe the strain softening section of stress–strain curve; the cap surface to describe the plastic volume change; the shape of the meridian and deviatoric plane to describe the yield surface as well as two methods of incorporating rebar into concrete mesh. This study gives a good example of using EPDC model and can be utilized for the development new constitutive models for concrete in future.

  12. Improvement of Aircraft Crash Effective Areas for Koeberg Nuclear Power Plant

    International Nuclear Information System (INIS)

    Momoti, S.; Dongmo, G.B.; Combrink, Y.

    2017-01-01

    Probabilistic Safety Assessment (PSA): Tool for determining safe functioning of nuclear power plant to meet regulatory requirements; One of the inputs to the PSA are the frequency and consequences of an aircraft crash. Overview: Frequency of Aircraft Crash; Effective Area of an Aircraft Crashing into Koeberg - Aviation Categories, - Shielding of sensitive target buildings; Impact of refining the Effective AreaFrequency of Aircraft Crash

  13. Technostress: Surviving a Database Crash.

    Science.gov (United States)

    Dobb, Linda S.

    1990-01-01

    Discussion of technostress in libraries focuses on a database crash at California Polytechnic State University, San Luis Obispo. Steps taken to restore the data are explained, strategies for handling technological accidents are suggested, the impact on library staff is discussed, and a 10-item annotated bibliography on technostress is provided.…

  14. Motor Carrier Crash Data -

    Data.gov (United States)

    Department of Transportation — Contains data on large trucks and buses involved in Federally reportable crashes as per Title 49 U.S.C. Part 390.5 (crashes involving a commercial motor vehicle, and...

  15. Seatbelt use to save money: Impact on hospital costs of occupants who are involved in motor vehicle crashes.

    Science.gov (United States)

    Han, Guang-Ming; Newmyer, Ashley; Qu, Ming

    2017-03-01

    Seatbelt use is the single most effective way to save lives in motor vehicle crashes (MVC). However, although safety belt laws have been enacted in many countries, seatbelt usage throughout the world remains below optimal levels, and educational interventions may be needed to further increase seatbelt use. In addition to reducing crash-related injuries and deaths, reduced medical expenditures resulting from seatbelt use are an additional benefit that could make such interventions cost-effective. Accordingly, the objective of this study was to estimate the correlation between seatbelt use and hospital costs of injuries involved in MVC. The data used in this study were from the Nebraska CODES database for motor vehicle crashes that occurred between 2004 and 2013. The hospital cost information and information about other factors were obtained by linking crash reports with hospital discharge data. A multivariable regression model was performed for the association between seatbelt use and hospital costs. Mean hospital costs were significantly lower among motor vehicle occupants using a lap-shoulder seatbelt ($2909), lap-only seatbelt ($2289), children's seatbelt ($1132), or booster ($1473) when compared with those not using any type of seatbelt ($7099). After adjusting for relevant factors, there were still significantly decreased hospital costs for motor vehicle occupants using a lap-shoulder seatbelt (84.7%), lap-only seatbelt (74.1%), shoulder-only seatbelt (40.6%), children's seatbelt (95.9%), or booster (82.8%) compared to those not using a seatbelt. Seatbelt use is significantly associated with reduced hospital costs among injured MVC occupants. The findings in this study will provide important educational information for emergency department nurses who can encourage safety belt use for vehicle occupants. Copyright © 2016. Published by Elsevier Ltd.

  16. Experimental and numerical studies of high-velocity impact fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Kipp, M.E.; Grady, D.E.; Swegle, J.W.

    1993-08-01

    Developments are reported in both experimental and numerical capabilities for characterizing the debris spray produced in penetration events. We have performed a series of high-velocity experiments specifically designed to examine the fragmentation of the projectile during impact. High-strength, well-characterized steel spheres (6.35 mm diameter) were launched with a two-stage light-gas gun to velocities in the range of 3 to 5 km/s. Normal impact with PMMA plates, thicknesses of 0.6 to 11 mm, applied impulsive loads of various amplitudes and durations to the steel sphere. Multiple flash radiography diagnostics and recovery techniques were used to assess size, velocity, trajectory and statistics of the impact-induced fragment debris. Damage modes to the primary target plate (plastic) and to a secondary target plate (aluminum) were also evaluated. Dynamic fragmentation theories, based on energy-balance principles, were used to evaluate local material deformation and fracture state information from CTH, a three-dimensional Eulerian solid dynamics shock wave propagation code. The local fragment characterization of the material defines a weighted fragment size distribution, and the sum of these distributions provides a composite particle size distribution for the steel sphere. The calculated axial and radial velocity changes agree well with experimental data, and the calculated fragment sizes are in qualitative agreement with the radiographic data. A secondary effort involved the experimental and computational analyses of normal and oblique copper ball impacts on steel target plates. High-resolution radiography and witness plate diagnostics provided impact motion and statistical fragment size data. CTH simulations were performed to test computational models and numerical methods.

  17. Numerical simulations of glass impacts using smooth particle hydrodynamics

    International Nuclear Information System (INIS)

    Mandell, D.A.; Wingate, C.A.

    1995-01-01

    As part of a program to develop advanced hydrocode design tools, we have implemented a brittle fracture model for glass into the SPHINX smooth particle hydrodynamics code. We have evaluated this model and the code by predicting data from one-dimensional flyer plate impacts into glass. Since fractured glass properties, which are needed in the model, are not available, we did sensitivity studies of these properties, as well as sensitivity studies to determine the number of particles needed in the calculations. The numerical results are in good agreement with the data

  18. Numerical investigation of road salt impact on an urban wellfield.

    Science.gov (United States)

    Bester, M L; Frind, E O; Molson, J W; Rudolph, D L

    2006-01-01

    The impact of road salt on a wellfield in a complex glacial moraine aquifer system is studied by numerical simulation. The moraine underlies an extensive urban and industrial landscape, which draws its water supply from >20 wellfields, several of which are approaching or have exceeded the drinking water limit for chloride. The study investigates the mechanisms of road salt infiltration, storage, and transport in the subsurface and assesses the effectiveness of mitigation measures designed to reduce the impact. The three-dimensional transport model accounts for increases in salt loading, as well as growth of the urbanized area and road network over the past 50 years. The simulations, which focus on one impacted wellfield, show chloride plumes originating mainly at arterial roads and migrating through aquitard windows into the water supply aquifers. The results suggest that the aquifer system contains a large and heterogeneously distributed mass of chloride and that concentrations in the aquifer can be substantially higher than the concentrations in the well water. Future impact scenarios indicate that although the system responds rapidly to reductions in salt loading, the residual chloride mass may take decades to flush out, even if road salting were discontinued. The implications with respect to urban wellfields in typical snow-belt areas are discussed.

  19. Impact of the pedestal plasma density on dynamics of edge localized mode crashes and energy loss scaling

    Energy Technology Data Exchange (ETDEWEB)

    Xu, X. Q., E-mail: xxu@llnl.gov [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Ma, J. F. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Institute for Fusion Studies, University of Texas, Austin, Texas 78712 (United States); Li, G. Q. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2014-12-15

    The latest BOUT++ studies show an emerging understanding of dynamics of edge localized mode (ELM) crashes and the consistent collisionality scaling of ELM energy losses with the world multi-tokamak database. A series of BOUT++ simulations are conducted to investigate the scaling characteristics of the ELM energy losses vs collisionality via a density scan. Linear results demonstrate that as the pedestal collisionality decreases, the growth rate of the peeling-ballooning modes decreases for high n but increases for low n (1 < n < 5), therefore the width of the growth rate spectrum γ(n) becomes narrower and the peak growth shifts to lower n. Nonlinear BOUT++ simulations show a two-stage process of ELM crash evolution of (i) initial bursts of pressure blob and void creation and (ii) inward void propagation. The inward void propagation stirs the top of pedestal plasma and yields an increasing ELM size with decreasing collisionality after a series of micro-bursts. The pedestal plasma density plays a major role in determining the ELM energy loss through its effect on the edge bootstrap current and ion diamagnetic stabilization. The critical trend emerges as a transition (1) linearly from ballooning-dominated states at high collisionality to peeling-dominated states at low collisionality with decreasing density and (2) nonlinearly from turbulence spreading dynamics at high collisionality into avalanche-like dynamics at low collisionality.

  20. Numerical study of impact erosion of multiple solid particle

    Science.gov (United States)

    Zheng, Chao; Liu, Yonghong; Chen, Cheng; Qin, Jie; Ji, Renjie; Cai, Baoping

    2017-11-01

    Material erosion caused by continuous particle impingement during hydraulic fracturing results in significant economic loss and increased production risks. The erosion process is complex and has not been clearly explained through physical experiments. To address this problem, a multiple particle model in a 3D configuration was proposed to investigate the dynamic erosion process. This approach can significantly reduce experiment costs. The numerical model considered material damping and elastic-plastic material behavior of target material. The effects of impact parameters on erosion characteristics, such as plastic deformation, contact time, and energy loss rate, were investigated. Based on comprehensive studies, the dynamic erosion mechanism and geometry evolution of eroded crater was obtained. These findings can provide a detailed erosion process of target material and insights into the material erosion caused by multiple particle impingement.

  1. Investigation of Influential Factors for Bicycle Crashes Using a Spatiotemporal Model

    Science.gov (United States)

    Gill, G.; Sakrani, T.; Cheng, W.; Zhou, J.

    2017-09-01

    Despite the numerous potential advantages of indulging in bicycling, such as elevation of health and environment along with mitigation of congestion, the cyclists are a vulnerable group of commuters which is exposed to safety risks. This study aims to investigate the explanatory variables at transportation planning level which have a significant impact on the bicycle crashes. To account for the serial changes around the built environment, the linear time trend as well as time-varying coefficients are utilized for the covariates. These model modifications help account for the variations in the environment which may escape the incorporated variables due to lack of robustness in data. Also, to incorporate the interaction of roadway, demographic, and socioeconomic features within a Traffic Analysis Zone (TAZ), with the bicycle crashes of that area, a spatial correlation is integrated. This spatial correlation accounts for the spatially structured random effects which capture the unobserved heterogeneity and add towards building more comprehensive model with relatively precise estimates. Two different age groups, the student population in the TAZs, the presence of arterial roads and bike lanes, were observed to be statistically significant variables related with bicycle crashes. These observations will guide the transportation planning organizations which focus on the entity of TAZ while developing policies. The results of the current study establish a quantifies relationship between the significant factors and the crash count which will enable the planners to choose the most cost-efficient, yet most productive, factors which needs to be addressed for mitigation of crashes.

  2. Journal Impact Factor: Do the Numerator and Denominator Need Correction?

    Science.gov (United States)

    Liu, Xue-Li; Gai, Shuang-Shuang; Zhou, Jing

    2016-01-01

    To correct the incongruence of document types between the numerator and denominator in the traditional impact factor (IF), we make a corresponding adjustment to its formula and present five corrective IFs: IFTotal/Total, IFTotal/AREL, IFAR/AR, IFAREL/AR, and IFAREL/AREL. Based on a survey of researchers in the fields of ophthalmology and mathematics, we obtained the real impact ranking of sample journals in the minds of peer experts. The correlations between various IFs and questionnaire score were analyzed to verify their journal evaluation effects. The results show that it is scientific and reasonable to use five corrective IFs for journal evaluation for both ophthalmology and mathematics. For ophthalmology, the journal evaluation effects of the five corrective IFs are superior than those of traditional IF: the corrective effect of IFAR/AR is the best, IFAREL/AR is better than IFTotal/Total, followed by IFTotal/AREL, and IFAREL/AREL. For mathematics, the journal evaluation effect of traditional IF is superior than those of the five corrective IFs: the corrective effect of IFTotal/Total is best, IFAREL/AR is better than IFTotal/AREL and IFAREL/AREL, and the corrective effect of IFAR/AR is the worst. In conclusion, not all disciplinary journal IF need correction. The results in the current paper show that to correct the IF of ophthalmologic journals may be valuable, but it seems to be meaningless for mathematic journals. PMID:26977697

  3. Crash probability estimation via quantifying driver hazard perception.

    Science.gov (United States)

    Li, Yang; Zheng, Yang; Wang, Jianqiang; Kodaka, Kenji; Li, Keqiang

    2018-07-01

    Crash probability estimation is an important method to predict the potential reduction of crash probability contributed by forward collision avoidance technologies (FCATs). In this study, we propose a practical approach to estimate crash probability, which combines a field operational test and numerical simulations of a typical rear-end crash model. To consider driver hazard perception characteristics, we define a novel hazard perception measure, called as driver risk response time, by considering both time-to-collision (TTC) and driver braking response to impending collision risk in a near-crash scenario. Also, we establish a driving database under mixed Chinese traffic conditions based on a CMBS (Collision Mitigation Braking Systems)-equipped vehicle. Applying the crash probability estimation in this database, we estimate the potential decrease in crash probability owing to use of CMBS. A comparison of the results with CMBS on and off shows a 13.7% reduction of crash probability in a typical rear-end near-crash scenario with a one-second delay of driver's braking response. These results indicate that CMBS is positive in collision prevention, especially in the case of inattentive drivers or ole drivers. The proposed crash probability estimation offers a practical way for evaluating the safety benefits in the design and testing of FCATs. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Preliminary Study on Effect of Aviation Fuel in the Safety Evaluation of Nuclear Power Plant Crashed by Aircraft

    International Nuclear Information System (INIS)

    Jin, Byeong Moo; Jeon, Se Jin; Lee, Yun Seok; Kim, Young Jin

    2011-01-01

    As the safety assessments of nuclear power plants for the hypothetical large civil aircraft crash should be made mandatory, studies on large aircraft-nuclear power plant impact analyses and assessments are actively in progress. The large civil aircraft are being operated with a large amount of fuel and the fuel can be assumed to contribute to the impact loads at the impact. The fuel, i.e., the internal liquid can be considered as added masses classically in the evaluation of the impact load. According to the recent experimental research, it has been shown that the impact load of high speed impacting body with internal liquid is much higher than that of the mass-equivalent impacting body. In this study, the impact loads according to the existence of the internal liquid are computed by numerical methods and the safety assessment of nuclear power plant crashed by large civil aircraft are performed as an application

  5. AP statistics crash course

    CERN Document Server

    D'Alessio, Michael

    2012-01-01

    AP Statistics Crash Course - Gets You a Higher Advanced Placement Score in Less Time Crash Course is perfect for the time-crunched student, the last-minute studier, or anyone who wants a refresher on the subject. AP Statistics Crash Course gives you: Targeted, Focused Review - Study Only What You Need to Know Crash Course is based on an in-depth analysis of the AP Statistics course description outline and actual Advanced Placement test questions. It covers only the information tested on the exam, so you can make the most of your valuable study time. Our easy-to-read format covers: exploring da

  6. Distracted Driving Raises Crash Risk

    Science.gov (United States)

    ... this issue Health Capsule Distracted Driving Raises Crash Risk En español Send us your comments Video technology ... distracted driving, especially among new drivers, raises the risk for car crashes and near crashes. The study ...

  7. Impact-friction vibrations of tubular systems. Numerical simulation and experimental validation

    International Nuclear Information System (INIS)

    Jacquart, G.

    1993-05-01

    This note presents a summary on the numerical developments made to simulate impact-friction vibrations of tubular systems, detailing the algorithms used and the expression of impact and friction forces. A synthesis of the experimental results obtained on MASSIF workbench is also presented, as well as their comparison with numerical computations in order to validate the numerical approach. (author). 5 refs

  8. Road crash costs.

    NARCIS (Netherlands)

    2010-01-01

    Road crashes result in all kinds of social costs, such as medical costs, production loss, human losses, property damage, settlement costs and costs due to congestion. Studies into road crash costs and their trends are carried out quite regularly. In 2009, the costs amounted to € 12.5 billion, or

  9. Meso-modeling of Carbon Fiber Composite for Crash Safety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Shih-Po; Chen, Yijung; Zeng, Danielle; Su, Xuming

    2017-04-06

    In the conventional approach, the material properties for crash safety simulations are typically obtained from standard coupon tests, where the test results only provide single layer material properties used in crash simulations. However, the lay-up effects for the failure behaviors of the real structure were not considered in numerical simulations. Hence, there was discrepancy between the crash simulations and experimental tests. Consequently, an intermediate stage is required for accurate predictions. Some component tests are required to correlate the material models in the intermediate stage. In this paper, a Mazda Tube under high-impact velocity is chosen as an example for the crash safety analysis. The tube consists of 24 layers of uni-directional (UD) carbon fiber composite materials, in which 4 layers are perpendicular to, while the other layers are parallel to the impact direction. An LS-DYNA meso-model was constructed with orthotropic material models counting for the single-layer material behaviors. Between layers, a node-based tie-break contact was used for modeling the delamination of the composite material. Since fiber directions are not single-oriented, the lay-up effects could be an important effect. From the first numerical trial, premature material failure occurred due to the use of material parameters obtained directly from the coupon tests. Some parametric studies were conducted to identify the cause of the numerical instability. The finding is that the material failure strength used in the numerical model needs to be enlarged to stabilize the numerical model. Some hypothesis was made to provide the foundation for enlarging the failure strength and the corresponding experiments will be conducted to validate the hypothesis.

  10. Safety Assessment of a Metal Cask under Aircraft Engine Crash

    Directory of Open Access Journals (Sweden)

    Sanghoon Lee

    2016-04-01

    Full Text Available The structural integrity of a dual-purpose metal cask currently under development by the Korea Radioactive Waste Agency (KORAD was evaluated, through numerical simulations and a model test, under high-speed missile impact reflecting targeted aircraft crash conditions. The impact conditions were carefully chosen through a survey on accident cases and recommendations from literature. In the impact scenario, a missile flying horizontally hits the top side of the cask, which is freestanding on a concrete pad, with a velocity of 150 m/s. A simplified missile simulating a commercial aircraft engine was designed from an impact load–time function available in literature. In the analyses, the dynamic behavior of the metal cask and the integrity of the containment boundary were assessed. The simulation results were compared with the test results for a 1:3 scale model. Although the dynamic behavior of the cask in the model test did not match exactly with the prediction from the numerical simulation, other structural responses, such as the acceleration and strain history during the impact, showed very good agreement. Moreover, the containment function of the cask survived the missile impact as expected from the numerical simulation. Thus, the procedure and methodology adopted in the structural numerical analyses were successfully validated.

  11. Numerical investigations on pressurized AL-composite vessel response to hypervelocity impacts: Comparison between experimental works and a numerical code

    Directory of Open Access Journals (Sweden)

    Mespoulet Jérôme

    2015-01-01

    Full Text Available Response of pressurized composite-Al vessels to hypervelocity impact of aluminum spheres have been numerically investigated to evaluate the influence of initial pressure on the vulnerability of these vessels. Investigated tanks are carbon-fiber overwrapped prestressed Al vessels. Explored internal air pressure ranges from 1 bar to 300 bar and impact velocity are around 4400 m/s. Data obtained from experiments (Xray radiographies, particle velocity measurement and post-mortem vessels have been compared to numerical results given from LS-DYNA ALE-Lagrange-SPH full coupling models. Simulations exhibit an under estimation in term of debris cloud evolution and shock wave propagation in pressurized air but main modes of damage/rupture on the vessels given by simulations are coherent with post-mortem recovered vessels from experiments. First results of this numerical work are promising and further simulation investigations with additional experimental data will be done to increase the reliability of the simulation model. The final aim of this crossed work is to numerically explore a wide range of impact conditions (impact angle, projectile weight, impact velocity, initial pressure that cannot be explore experimentally. Those whole results will define a rule of thumbs for the definition of a vulnerability analytical model for a given pressurized vessel.

  12. Repeatability study of replicate crash tests: A signal analysis approach.

    Science.gov (United States)

    Seppi, Jeremy; Toczyski, Jacek; Crandall, Jeff R; Kerrigan, Jason

    2017-10-03

    To provide an objective basis on which to evaluate the repeatability of vehicle crash test methods, a recently developed signal analysis method was used to evaluate correlation of sensor time history data between replicate vehicle crash tests. The goal of this study was to evaluate the repeatability of rollover crash tests performed with the Dynamic Rollover Test System (DRoTS) relative to other vehicle crash test methods. Test data from DRoTS tests, deceleration rollover sled (DRS) tests, frontal crash tests, frontal offset crash tests, small overlap crash tests, small overlap impact (SOI) crash tests, and oblique crash tests were obtained from the literature and publicly available databases (the NHTSA vehicle database and the Insurance Institute for Highway Safety TechData) to examine crash test repeatability. Signal analysis of the DRoTS tests showed that force and deformation time histories had good to excellent repeatability, whereas vehicle kinematics showed only fair repeatability due to the vehicle mounting method for one pair of tests and slightly dissimilar mass properties (2.2%) in a second pair of tests. Relative to the DRS, the DRoTS tests showed very similar or higher levels of repeatability in nearly all vehicle kinematic data signals with the exception of global X' (road direction of travel) velocity and displacement due to the functionality of the DRoTS fixture. Based on the average overall scoring metric of the dominant acceleration, DRoTS was found to be as repeatable as all other crash tests analyzed. Vertical force measures showed good repeatability and were on par with frontal crash barrier forces. Dynamic deformation measures showed good to excellent repeatability as opposed to poor repeatability seen in SOI and oblique deformation measures. Using the signal analysis method as outlined in this article, the DRoTS was shown to have the same or better repeatability of crash test methods used in government regulatory and consumer evaluation test

  13. Behaviour of a spent fuel transport-storage cask during an airplane crash

    International Nuclear Information System (INIS)

    Malesys, P.

    1994-01-01

    TRANSNUCLEAIRE has got an order for the design and manufacturing of dual purpose, transport and storage, casks for spent fuel.An original item of the qualification of the design of this cask, for the storage aspect, is the necessity to demonstrate the resistance to an air crash.The typical case taken into account for design is the crash of a military fighter (F16) with a total mass of 14600kg and an impact speed of 150ms -1 . The demonstration of the ability of the cask to withstand this test is provided by both calculation and test.Two cases were considered. For the first one, the projectile hits the cask at the centre of the anti-crash lid. For the second one, it hits the cask in the plane of the closure system.The first step of the qualification is based on calculations performed with a code designed to study the effects of crashes. The aim of the calculations is, mainly, to determine the missile which has to be shot, and to select the worst orientation for the impact.To provide a full justification of the acceptability of the impact as concerned leaktightness, a test has been performed on a one-third scale model. It has shown that it was not altered by the impact.The paper provides a full description of the method of analysis, results of the numerical analysis, conclusion of the test and how the combination of calculation and test demonstrates the ability of the cask to withstand an airplane crash. ((orig.))

  14. Analysis of the impact of an aircraft crash on underground concrete ducts with protective slab at reactor buildings

    International Nuclear Information System (INIS)

    Kotulla, B.; Hansson, V.

    1977-01-01

    In this paper different types of idealization for a dynamic analysis of underground concrete ducts with protective slab are discussed and compared. Ducts between reactor and control building of a nuclear power plant are to be designed for loadings produced by an aircraft crash. These ducts have a height of about three to four meters and are two to eight meters wide. They are designed with a protective slab about 1.5 m in thickness at ground level and with an intermediate layer of earth of about one meter in thickness. An analysis has to take into account the combined effects of a protective slab with a relatively thin intermediate layer of earth and the underlaying duct and layer of soil with the nonlinear behavior of concrete due to cracking. For describing this behavior two types of idealization were made. One type is a continuum type calculation which describes the slab, the soil and the duct by finite elements. In the other type of idealization a model consisting of springs and lumped masses is used. The protective slab and the intermediate layer of earth may be described as a plate on elastic foundation. The behavior of the cracked part of the plate and the part of earth layer beneath and loads transferred to the uncracked part of the slab and the surrounding soil may be described by parallel springs. Spring and mass of this part of the model have to take into account the cracking of the upper slab which leads to a nonlinear characteristic of the spring. In addition the location of the loading in relation to the duct has to be considered. The duct may be described by a beam on elastic foundation which is loaded locally. From this model representative mass and spring have to be determined

  15. Patterns of severe injury in pediatric car crash victims: Crash Injury Research Engineering Network database.

    Science.gov (United States)

    Brown, J Kristine; Jing, Yuezhou; Wang, Stewart; Ehrlich, Peter F

    2006-02-01

    Motor vehicle crashes (MVCs) account for 50% of pediatric trauma. Safety improvements are typically tested with child crash dummies using an in vitro model. The Crash Injury Research Engineering Network (CIREN) provides an in vivo validation process. Previous research suggest that children in lateral crashes or front-seat locations have higher Injury Severity Scale scores and lower Glasgow Coma Scale scores than those in frontal-impact crashes. However, specific injury patterns and crash characteristics have not been characterized. Data were collected from the CIREN multidisciplinary crash reconstruction network (10 pediatric trauma centers). Injuries were examined with regard to crash direction (frontal/lateral), restraint use, seat location, and change in velocity at impact (DeltaV). Injuries were limited to Abbreviated Injury Scale (AIS) scores of 3 or higher and included head, thoracic, abdominal, pelvic, spine, and long bone (orthopedic) injuries. Standard age groupings (0-4, 5-9, 10-14, and 15-18 years) were used. Statistical analyses used Fisher's Exact test and multiple logistic regressions. Four hundred seventeen MVCs with 2500 injuries were analyzed (males = 219, females = 198). Controlling for DeltaV and age, children in lateral-impact crashes (n = 232) were significantly more likely to suffer severe injuries to the head and thorax as compared with children in frontal crashes (n = 185), who were more likely to suffer severe spine and orthopedic injuries. Children in a front-seat (n = 236) vs those in a back-seat (n = 169) position had more injuries to the thoracic (27% vs 17%), abdominal (21% vs 13%), pelvic (11% vs 1%), and orthopedic (28% vs 10%) regions (P < .05 for all). Seat belts were protective for pelvic (5% vs 12% unbelted) and orthopedic (15% vs 40%) injuries (odds ratio = 3, P < .01 for both). A reproducible pattern of injury is noted for children involved in lateral-impact crashes characterized by head and chest injuries. The Injury Severity

  16. Numerical

    Directory of Open Access Journals (Sweden)

    M. Boumaza

    2015-07-01

    Full Text Available Transient convection heat transfer is of fundamental interest in many industrial and environmental situations, as well as in electronic devices and security of energy systems. Transient fluid flow problems are among the more difficult to analyze and yet are very often encountered in modern day technology. The main objective of this research project is to carry out a theoretical and numerical analysis of transient convective heat transfer in vertical flows, when the thermal field is due to different kinds of variation, in time and space of some boundary conditions, such as wall temperature or wall heat flux. This is achieved by the development of a mathematical model and its resolution by suitable numerical methods, as well as performing various sensitivity analyses. These objectives are achieved through a theoretical investigation of the effects of wall and fluid axial conduction, physical properties and heat capacity of the pipe wall on the transient downward mixed convection in a circular duct experiencing a sudden change in the applied heat flux on the outside surface of a central zone.

  17. 14 CFR 29.952 - Fuel system crash resistance.

    Science.gov (United States)

    2010-01-01

    ... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.952 Fuel system... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel system crash resistance. 29.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

  18. 14 CFR 27.952 - Fuel system crash resistance.

    Science.gov (United States)

    2010-01-01

    ... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.952 Fuel system... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel system crash resistance. 27.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

  19. Allegheny County Crash Data

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Contains locations and information about every crash incident reported to the police in Allegheny County from 2004 to 2016. Fields include injury severity,...

  20. Allegheny County Crash Data

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Contains locations and information about every crash incident reported to the police in Allegheny County from 2004 to 2017. Fields include injury severity,...

  1. Offsite radiological consequence analysis for the bounding aircraft crash accident

    International Nuclear Information System (INIS)

    OBERG, B.D.

    2003-01-01

    The purpose of this calculation note is to quantitatively analyze a bounding aircraft crash accident for comparison to the DOE-STD-3009-94, ''Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', Appendix A, Evaluation Guideline of 25 rem. The potential of aircraft impacting a facility was evaluated using the approach given in DOE-STD-3014-96, ''Accident Analysis for Aircraft Crash into Hazardous Facilities''. The following aircraft crash FR-equencies were determined for the Tank Farms in RPP-11736, ''Assessment Of Aircraft Crash FR-equency For The Hanford Site 200 Area Tank Farms'': (1) The total aircraft crash FR-equency is ''extremely unlikely.'' (2) The general aviation crash FR-equency is ''extremely unlikely.'' (3) The helicopter crash FR-equency is ''beyond extremely unlikely.'' (4) For the Hanford Site 200 Areas, other aircraft type, commercial or military, each above ground facility, and any other type of underground facility is ''beyond extremely unlikely.'' As the potential of aircraft crash into the 200 Area tank farms is more FR-equent than ''beyond extremely unlikely,'' consequence analysis of the aircraft crash is required

  2. Damage assessment of nuclear containment against aircraft crash

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, Mohd Ashraf, E-mail: iqbal_ashraf@rediffmail.com; Sadique, Md. Rehan, E-mail: rehan.sadique@gmail.com; Bhargava, Pradeep, E-mail: bhpdpfce@iitr.ac.in; Bhandari, N.M., E-mail: nmbcefce@iitr.ac.in

    2014-10-15

    Highlights: • Damage assessment of nuclear containment is studied against aircraft crash. • Four impact locations have been identified at the outer containment shell. • The mid of the total height has been found to be most vulnerable location. • The crown of dome has been found to be the strongest location. • Phantom F4 caused more localized and severe damage compared to other aircrafts. - Abstract: The behavior of nuclear containment structure has been studied against aircraft crash with an emphasis on the influence of strike location. The impact locations identified on the BWR Mark III type nuclear containment structure are mid-height, junction of dome and cylinder, crown of dome and arc of dome. The containment at each of the above locations has been impacted normally by Phantom F-4, Boeing 707-320 and Airbus A320 aircrafts. The loading of the aircraft has been assigned through the corresponding reaction-time response curve. ABAQUS/Explicit finite element code has been used to carry out the three-dimensional numerical simulations. The concrete damaged plasticity model was used to simulate the behavior of concrete while the behavior of steel reinforcement was incorporated using the Johnson–Cook elasto-viscoplastic material model. The mid-height of containment has been found to experience most severe deformation against each aircraft. Phantom F4 has been found to be most disastrous at each location. The results have been compared with those of the available studies with respect to the containment deformation.

  3. Estimating likelihood of future crashes for crash-prone drivers

    OpenAIRE

    Subasish Das; Xiaoduan Sun; Fan Wang; Charles Leboeuf

    2015-01-01

    At-fault crash-prone drivers are usually considered as the high risk group for possible future incidents or crashes. In Louisiana, 34% of crashes are repeatedly committed by the at-fault crash-prone drivers who represent only 5% of the total licensed drivers in the state. This research has conducted an exploratory data analysis based on the driver faultiness and proneness. The objective of this study is to develop a crash prediction model to estimate the likelihood of future crashes for the a...

  4. Crash protection of stock car racing drivers--application of biomechanical analysis of Indy car crash research.

    Science.gov (United States)

    Melvin, John W; Begeman, Paul C; Faller, Ronald K; Sicking, Dean L; McClellan, Scott B; Maynard, Edwin; Donegan, Michael W; Mallott, Annette M; Gideon, Thomas W

    2006-11-01

    Biomechanical analysis of Indy car crashes using on-board impact recorders (Melvin et al. 1998, Melvin et al. 2001) indicates that Indy car driver protection in high-energy crashes can be achieved in frontal, side, and rear crashes with severities in the range of 100 to 135 G peak deceleration and velocity changes in the range of 50 to 70 mph. These crashes were predominantly single-car impacts with the rigid concrete walls of oval tracks. This impressive level of protection was found to be due to the unique combination of a very supportive and tight-fitting cockpit-seating package, a six-point belt restraint system, and effective head padding with an extremely strong chassis that defines the seat and cockpit of a modern Indy car. In 2000 and 2001, a series of fatal crashes in stock car racing created great concern for improving the crash protection for drivers in those racecars. Unlike the Indy car, the typical racing stock car features a more spacious driver cockpit due to its resemblance to the shape of a passenger car. The typical racing seat used in stock cars did not have the same configuration or support characteristics of the Indy car seat, and five-point belt restraints were used. The tubular steel space frame chassis of a stock car also differs from an Indy car's composite chassis structure in both form and mechanical behavior. This paper describes the application of results of the biomechanical analysis of the Indy car crash studies to the unique requirements of stock car racing driver crash protection. Sled test and full-scale crash test data using both Hybrid III frontal crash anthropomorphic test devices (ATDs) and BioSID side crash ATDs for the purpose of evaluating countermeasures involving restraint systems, seats and head/neck restraints has been instrumental in guiding these developments. In addition, the development of deformable walls for oval tracks (the SAFER Barrier) is described as an adjunct to improved occupant restraint through control

  5. Numerical human model for impact and seating comfort

    NARCIS (Netherlands)

    Hoof, J.F.A.M. van; Lange, R. de; Verver, M.M.

    2003-01-01

    This paper presents a detailed numerical model of the human body that can be used to evaluate both safety and comfort aspects of vehicle interiors. The model is based on a combination of rigid body and finite element techniques to provide an optimal combination of computational efficiency and

  6. Critical market crashes

    Science.gov (United States)

    Sornette, D.

    2003-04-01

    This review presents a general theory of financial crashes and of stock market instabilities that his co-workers and the author have developed over the past seven years. We start by discussing the limitation of standard analyses for characterizing how crashes are special. The study of the frequency distribution of drawdowns, or runs of successive losses shows that large financial crashes are “outliers”: they form a class of their own as can be seen from their statistical signatures. If large financial crashes are “outliers”, they are special and thus require a special explanation, a specific model, a theory of their own. In addition, their special properties may perhaps be used for their prediction. The main mechanisms leading to positive feedbacks, i.e., self-reinforcement, such as imitative behavior and herding between investors are reviewed with many references provided to the relevant literature outside the narrow confine of Physics. Positive feedbacks provide the fuel for the development of speculative bubbles, preparing the instability for a major crash. We demonstrate several detailed mathematical models of speculative bubbles and crashes. A first model posits that the crash hazard drives the market price. The crash hazard may sky-rocket at some times due to the collective behavior of “noise traders”, those who act on little information, even if they think they “know”. A second version inverses the logic and posits that prices drive the crash hazard. Prices may skyrocket at some times again due to the speculative or imitative behavior of investors. According the rational expectation model, this entails automatically a corresponding increase of the probability for a crash. We also review two other models including the competition between imitation and contrarian behavior and between value investors and technical analysts. The most important message is the discovery of robust and universal signatures of the approach to crashes. These precursory

  7. Sub-impacts of simply supported beam struck by steel sphere—part II: Numerical simulations

    Directory of Open Access Journals (Sweden)

    Xiaoli Qi

    2016-12-01

    Full Text Available This part of the article describes numerical simulations of the problem investigated experimentally. A three-dimensional finite element model of elastic–plastic for sphere falling on beam has been implemented using the nonlinear dynamic finite element software LS-DYNA. From the numerical simulations, it was found that the LS-DYNA is suitable to study complex sub-impact phenomenon, and good agreement is in general obtained between the simulation and experimental results. The numerical simulations show that the initial impact velocity, equivalent elasticity modulus, contact curvature radius of the sphere, and equivalent mass have great influence on the contact–impact time of the sub-impact, and an applicable range of the theoretical expression of contact–impact time of the sub-impact was determined. In addition, the numerical simulations demonstrate the ratios of maximum amplitudes of the first-, second-, and third-order vibrations to the maximum amplitudes of the beam vibrations, and the phase angle of the first-order vibration will change suddenly when the sub-impacts occur. Furthermore, the occurrence conditions of the sub-impacts were clarified numerically. It was found that the occurrence conditions of the sub-impacts can be represented by a mass ratio threshold, and the thickness or length of the beam has also a great influence on the occurrence of the sub-impacts. Once the sub-impacts occur, which would result in an uncertain behavior of the apparent coefficient of restitution.

  8. The impact of cognitive deficit on self-reported car crashes in ultra-octogenarian population: data of an Italian population-based study.

    Science.gov (United States)

    Rozzini, Luca; Riva, Maddalena; Zanetti, Marina; Gottardi, Federica; Caratozzolo, Salvatore; Vicini Chilovi, Barbara; Trabucchi, Marco; Padovani, Alessandro

    2013-06-01

    To examine the usefulness of specific neurocognitive tests for predicting the crash involvement in ultra-octogenarian population. A total of 800 subjects (mean age 82.4 + 3.1 years) underwent a battery of neuropsychological tests. Global intellectual functioning was assessed using the Mini Mental State Examination, mental flexibility and information processing speed were assessed using the Trail Making Test parts A and B (TMT-A and TMT-B), long-term memory was evaluated with the short story, and visuo-spatial skills were tested with Clock Drawing Test. One year after this evaluation, 343 (43%) participants have been interviewed by a telephone call to know if they were currently driving and if they had a car crash during this period. Two hundred ninety-seven subjects had their driving license renewed and completed the follow-up 1 year after. Data shows that less than 11% of this group had a car crash during the first year of observation (Crash Involved). Older subjects involved in a car crash showed significant worse performances on TMT-B (TMT-B pathological Crash Involved vs. Noncrash Involved 47% vs. 27%; p = 0.02) and on short story (short story pathological Crash Involved vs. Noncrash Involved 19% vs. 5%; p = 0.02). Trail Making test B and short story have been demonstrated to provide a predictive value of driving performance of older people. Therefore, we suggest that a simple and standardized battery of neuropsychological tests, lasting about 30 min and administered by an experienced staff, is a good diagnostic instrument for risk prevention of driving activity of older drivers. Copyright © 2012 John Wiley & Sons, Ltd.

  9. Estimating likelihood of future crashes for crash-prone drivers

    Directory of Open Access Journals (Sweden)

    Subasish Das

    2015-06-01

    Full Text Available At-fault crash-prone drivers are usually considered as the high risk group for possible future incidents or crashes. In Louisiana, 34% of crashes are repeatedly committed by the at-fault crash-prone drivers who represent only 5% of the total licensed drivers in the state. This research has conducted an exploratory data analysis based on the driver faultiness and proneness. The objective of this study is to develop a crash prediction model to estimate the likelihood of future crashes for the at-fault drivers. The logistic regression method is used by employing eight years' traffic crash data (2004–2011 in Louisiana. Crash predictors such as the driver's crash involvement, crash and road characteristics, human factors, collision type, and environmental factors are considered in the model. The at-fault and not-at-fault status of the crashes are used as the response variable. The developed model has identified a few important variables, and is used to correctly classify at-fault crashes up to 62.40% with a specificity of 77.25%. This model can identify as many as 62.40% of the crash incidence of at-fault drivers in the upcoming year. Traffic agencies can use the model for monitoring the performance of an at-fault crash-prone drivers and making roadway improvements meant to reduce crash proneness. From the findings, it is recommended that crash-prone drivers should be targeted for special safety programs regularly through education and regulations.

  10. NUMERICAL MODELING OF THE 2009 IMPACT EVENT ON JUPITER

    Energy Technology Data Exchange (ETDEWEB)

    Pond, Jarrad W. T.; Palotai, Csaba; Gabriel, Travis; Harrington, Joseph; Rebeli, Noemi [Planetary Sciences Group, Department of Physics, University of Central Florida, Orlando, FL 32816-2385 (United States); Korycansky, Donald G., E-mail: jarradpond@gmail.com [Department of Earth and Planetary Science, University of California, Santa Cruz, CA 95064 (United States)

    2012-02-01

    We have investigated the 2009 July impact event on Jupiter using the ZEUS-MP 2 three-dimensional hydrodynamics code. We studied the impact itself and the following plume development. Eight impactors were considered: 0.5 km and 1 km porous ({rho} = 1.760 g cm{sup -3}) and non-porous ({rho} = 2.700 g cm{sup -3}) basalt impactors, and 0.5 km and 1 km porous ({rho} = 0.600 g cm{sup -3}) and non-porous ({rho} = 0.917 g cm{sup -3}) ice impactors. The simulations consisted of these bolides colliding with Jupiter at an incident angle of {theta} = 69 Degree-Sign from the vertical and with an impact velocity of v = 61.4 km s{sup -1}. Our simulations show the development of relatively larger, faster plumes created after impacts involving 1 km diameter bodies. Comparing simulations of the 2009 event with simulations of the Shoemaker-Levy 9 (SL9) events reveals a difference in plume development, with the higher incident angle of the 2009 impact leading to a shallower terminal depth and a smaller and slower plume. We also studied the amount of dynamical chaos present in the simulations conducted at the 2009 incident angle. Compared to the chaos of the SL9 simulations, where {theta} Almost-Equal-To 45 Degree-Sign , we find no significant difference in chaos at the higher 2009 incident angle.

  11. A Numerical Investigation into Low-Speed Impact Cratering Events

    Science.gov (United States)

    Schwartz, Stephen; Richardson, D. C.; Michel, P.

    2012-10-01

    Impact craters are the geological features most commonly observed on the surface of solid Solar System bodies. Crater shapes and features are crucial sources of information regarding past and present surface environments, and can provide indirect information about the internal structures of these bodies. In this study, we consider the effects of low-speed impacts into granular material. Studies of low-speed impact events are suitable for understanding the cratering process leading, for instance, to secondary craters. In addition, upcoming asteroid sample return missions will employ surface sampling strategies that use impacts into the surface by a projectile. An understanding of the process can lead to better sampling strategies. We use our implementation of the Soft-Sphere Discrete Element Method (SSDEM) (Schwartz et al. 2012, Granular Matter 14, 363-380) into the parallel N-body code PKDGRAV (cf. Richardson et al. 2011, Icarus 212, 427-437) to model the impact cratering process into granular material. We consider the effects of boundary conditions on the ejecta velocity profile and discuss how results relate to the Maxwell Z-Model during the crater growth phase. Cratering simulations are compared to those of Wada et al. 2006 (Icarus 180, 528-545) and to impact experiments performed in conjunction with Hayabusa 2. This work is supported in part by grants from the National Science Foundation under grant number AST1009579 and from the Office of Space Science of NASA under grant number NNX08AM39G. Part of this study resulted from discussions with the International Team (#202) sponsored by ISSI in Bern (Switzerland). Some simulations were performed on the YORP cluster administered by the Center for Theory and Computation of the Department of Astronomy at the University of Maryland in College Park and on the SIGGAM computer cluster hosted by the Côte d'Azur Observatory in Nice (France).

  12. 78 FR 52605 - Announcing the Twenty First Public Meeting of the Crash Injury Research and Engineering Network...

    Science.gov (United States)

    2013-08-23

    ... large numbers of people injured in motor vehicle crashes. These teams are led by trauma surgeons and... in Frontal Impacts; Rib Fractures in Older Occupants; Changes Over Time in Injury and Crash...

  13. Simulation of the lateral pole-impact on a crash simulation system; Simulation des seitlichen Pfahlaufpralls auf einer Katapultanlage

    Energy Technology Data Exchange (ETDEWEB)

    Hoegner, C.; Gajewski, M.; Zippel, I. [ACTS GmbH und Co. KG, Sailauf (Germany)

    2001-07-01

    The test set-up for the simulation of a lateral pole impact has the following characteristics: - Simulation of pole impact procedures Euro-NCAP and others - Very realistic reproduction of the deformation performance of side panels (with simulated or original part assemblies) - Consideration of the dynamic displacement of the cant rail - Seat displacement and deformation - Realistic depiction of the vehicle displacement (i.e. car-to-pole) - Test velocity: up to 50 km/h - Intrusion: up to 550 mm (more also possible on demand) - Pole diameter 254 mm (variable). This test system design results in variable set-up possibilities: - Test-set up possible from very simple (on the basis of simulation data without real parts) to very complex (use of side panels and interior door trim) - Support of different protection systems (window bag and side bag) - A maximum of two occupants feasible (set up weight max. 300 kg) - Optimal camera perspectives, stationary or onboard - Front as well as rear side impact simulation possible - Front-rear interaction of protection systems feasible (two dummies). A test system has been realised with which the complex process in a lateral pole impact can be simulated with excellent approximation and with relatively simple means. Due to the avoidance of point validation this methodology can be ideally implemented for development tests. (orig.)

  14. Analysis of Aircraft Crash Accident for WETF

    International Nuclear Information System (INIS)

    Jordan, Hans

    2001-01-01

    This report applies the methodology of DOE-STD-3014-96, ''Accident Analysis for Aircraft Crash into Hazardous Facilities'', to the Weapons Engineering Tritium Facility (WETF) at LANL. Straightforward application of that methodology shows that including local helicopter flights with those of all other aircraft with potential to impact the facility poses a facility impact risk slightly in excess of the DOE standard's threshold--10 -6 impacts per year. It is also shown that helicopters can penetrate the facility if their engines impact that facility's roof. However, a refinement of the helicopter impact analysis shows that penetration risk of the facility for all aircraft lies below the DOE standard's threshold. By that standard, therefore, the potential for release of hazardous material from the facility as a result of an aircraft crashing into the facility is negligible and need not be analyzed further

  15. Experimental and numerical investigations of liquid mercury droplet impacts

    International Nuclear Information System (INIS)

    Naoe, Takashi; Futakawa, Masatoshi; Kenny, Richard Gerrard; Otsuki, Masato

    2014-01-01

    A broad investigation into the hydrodynamics of liquid mercury has been motivated of late by its use in MW-scale spallation neutron sources. One area of particular concern relates to the erosion suffered by vessel walls from the cumulative effects of liquid mercury droplet impacts arising from the collapse of cavitation bubbles. The low speed (< 5 m/s) range of such events forms the focus of this paper and to this end a series of experiments is conducted on spherical droplets of diameter 2.5 mm impacting upon a dry quartz surface. A reasonable simulation of such impacts is made possible by using the VOF (volume of fluid) solver interFoam (a part of the open source package OpenFOAM) in combination with an empirical expression for the dynamic contact angle of the air-mercury-quartz system. This latter represents a 'best fit' to data obtained from high resolution imaging of the droplet profile for a range of contact line velocities. Experiment and simulation are subsequently compared throughout the stages of initial deposition, spread, recession with break-up and, finally, bounce. (author)

  16. Time-varying Crash Risk

    DEFF Research Database (Denmark)

    Christoffersen, Peter; Feunoua, Bruno; Jeon, Yoontae

    We estimate a continuous-time model with stochastic volatility and dynamic crash probability for the S&P 500 index and find that market illiquidity dominates other factors in explaining the stock market crash risk. While the crash probability is time-varying, its dynamic depends only weakly on re...

  17. Validation of a method to evaluate future impact of road safety interventions, a comparison between fatal passenger car crashes in Sweden 2000 and 2010.

    Science.gov (United States)

    Strandroth, Johan

    2015-03-01

    When targeting a society free from serious and fatal road-traffic injuries, it has been a common practice in many countries and organizations to set up time-limited and quantified targets for the reduction of fatalities and injuries. In setting these targets EU and other organizations have recognized the importance to monitor and predict the development toward the target as well as the efficiency of road safety policies and interventions. This study aims to validate a method to forecast future road safety challenges by applying it to the fatal crashes in Sweden in 2000 and using the method to explain the change in fatalities based on the road safety interventions made until 2010. The estimation of the method is then compared to the true outcome in 2010. The aim of this study was to investigate if a residual of crashes produced by a partial analysis could constitute a sufficient base to describe the characteristics of future crashes. show that out of the 332 car occupants killed in 2000, 197 were estimated to constitute the residual in 2010. Consequently, 135 fatalities from 2000 were estimated by the model to be prevented by 2010. That is a predicted reduction of 41% compared to the reduction in the real outcome of 53%, from 332 in 2000 to 156 in 2010. The method was found able to generate a residual of crashes in 2010 from the crashes in 2000 that had a very similar nature, with regards to crash type, as the true outcome of 2010. It was also found suitable to handle double counting and system effects. However, future research is needed in order to investigate how external factors as well as random and systematic variation should be taken into account in a reliable manner. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Hotspots and causes of motor vehicle crashes in Baltimore, Maryland: A geospatial analysis of five years of police crash and census data.

    Science.gov (United States)

    Dezman, Zachary; de Andrade, Luciano; Vissoci, Joao Ricardo; El-Gabri, Deena; Johnson, Abree; Hirshon, Jon Mark; Staton, Catherine A

    2016-11-01

    Road traffic injuries are a leading killer of youth (aged 15-29) and are projected to be the 7th leading cause of death by 2030. To better understand road traffic crash locations and characteristics in the city of Baltimore, we used police and census data, to describe the epidemiology, hotspots, and modifiable risk factors involved to guide further interventions. Data on all crashes in Baltimore City from 2009 to 2013 were made available from the Maryland Automated Accident Reporting System. Socioeconomic data collected by the US CENSUS 2010 were obtained. A time series analysis was conducted using an ARIMA model. We analyzed the geographical distribution of traffic crashes and hotspots using exploratory spatial data analysis and spatial autocorrelation. Spatial regression was performed to evaluate the impact of socioeconomic indicators on hotspots. In Baltimore City, between 2009 and 2013, there were a total of 100,110 crashes reported, with 1% of crashes considered severe. Of all crashes, 7% involved vulnerable road users and 12% had elderly or youth involvement. Reasons for crashes included: distracted driving (31%), speeding (6%), and alcohol or drug use (5%). After 2010, we observed an increasing trend in all crashes especially from March to June. Distracted driving then youth and elderly drivers were consistently the highest risk factors over time. Multivariate spatial regression model including socioeconomic indicators and controlling for age, gender and population size did not show a distinct predictor of crashes explaining only 20% of the road crash variability, indicating crashes are not geographically explained by socioeconomic indicators alone. In Baltimore City, road traffic crashes occurred predominantly in the high density center of the city, involved distracted driving and extremes of age with an increase in crashes from March to June. There was no association between socioeconomic variables where crashes occurred and hotspots. In depth analysis of

  19. Numerical Study of the Critical Impact Velocity in Shear. Appendix Number 1

    National Research Council Canada - National Science Library

    Klosak, M

    1996-01-01

    .... A numerical study of impact shearing of a layer has been performed by the FE code ABAQUS. It was intended to verify available experimental results for VAR 4340 steel 52 HRC, obtained by direct...

  20. INVESTIGATION OF ROADWAY GEOMETRIC AND TRAFFIC FLOW FACTORS FOR VEHICLE CRASHES USING SPATIOTEMPORAL INTERACTION

    Directory of Open Access Journals (Sweden)

    G. Gill

    2017-09-01

    Full Text Available Traffic safety is a major concern in the transportation industry due to immense monetary and emotional burden caused by crashes of various severity levels, especially the injury and fatality ones. To reduce such crashes on all public roads, the safety management processes are commonly implemented which include network screening, problem diagnosis, countermeasure identification, and project prioritization. The selection of countermeasures for potential mitigation of crashes is governed by the influential factors which impact roadway crashes. Crash prediction model is the tool widely adopted by safety practitioners or researchers to link various influential factors to crash occurrences. Many different approaches have been used in the past studies to develop better fitting models which also exhibit prediction accuracy. In this study, a crash prediction model is developed to investigate the vehicular crashes occurring at roadway segments. The spatial and temporal nature of crash data is exploited to form a spatiotemporal model which accounts for the different types of heterogeneities among crash data and geometric or traffic flow variables. This study utilizes the Poisson lognormal model with random effects, which can accommodate the yearly variations in explanatory variables and the spatial correlations among segments. The dependency of different factors linked with roadway geometric, traffic flow, and road surface type on vehicular crashes occurring at segments was established as the width of lanes, posted speed limit, nature of pavement, and AADT were found to be correlated with vehicle crashes.

  1. Investigation of Roadway Geometric and Traffic Flow Factors for Vehicle Crashes Using Spatiotemporal Interaction

    Science.gov (United States)

    Gill, G.; Sakrani, T.; Cheng, W.; Zhou, J.

    2017-09-01

    Traffic safety is a major concern in the transportation industry due to immense monetary and emotional burden caused by crashes of various severity levels, especially the injury and fatality ones. To reduce such crashes on all public roads, the safety management processes are commonly implemented which include network screening, problem diagnosis, countermeasure identification, and project prioritization. The selection of countermeasures for potential mitigation of crashes is governed by the influential factors which impact roadway crashes. Crash prediction model is the tool widely adopted by safety practitioners or researchers to link various influential factors to crash occurrences. Many different approaches have been used in the past studies to develop better fitting models which also exhibit prediction accuracy. In this study, a crash prediction model is developed to investigate the vehicular crashes occurring at roadway segments. The spatial and temporal nature of crash data is exploited to form a spatiotemporal model which accounts for the different types of heterogeneities among crash data and geometric or traffic flow variables. This study utilizes the Poisson lognormal model with random effects, which can accommodate the yearly variations in explanatory variables and the spatial correlations among segments. The dependency of different factors linked with roadway geometric, traffic flow, and road surface type on vehicular crashes occurring at segments was established as the width of lanes, posted speed limit, nature of pavement, and AADT were found to be correlated with vehicle crashes.

  2. Constraining the thermal conditions of impact environments through integrated low-temperature thermochronometry and numerical modeling

    Science.gov (United States)

    Kelly, N. M.; Marchi, S.; Mojzsis, S. J.; Flowers, R. M.; Metcalf, J. R.; Bottke, W. F., Jr.

    2017-12-01

    Impacts have a significant physical and chemical influence on the surface conditions of a planet. The cratering record is used to understand a wide array of impact processes, such as the evolution of the impact flux through time. However, the relationship between impactor size and a resulting impact crater remains controversial (e.g., Bottke et al., 2016). Likewise, small variations in the impact velocity are known to significantly affect the thermal-mechanical disturbances in the aftermath of a collision. Development of more robust numerical models for impact cratering has implications for how we evaluate the disruptive capabilities of impact events, including the extent and duration of thermal anomalies, the volume of ejected material, and the resulting landscape of impacted environments. To address uncertainties in crater scaling relationships, we present an approach and methodology that integrates numerical modeling of the thermal evolution of terrestrial impact craters with low-temperature, (U-Th)/He thermochronometry. The approach uses time-temperature (t-T) paths of crust within an impact crater, generated from numerical simulations of an impact. These t-T paths are then used in forward models to predict the resetting behavior of (U-Th)/He ages in the mineral chronometers apatite and zircon. Differences between the predicted and measured (U-Th)/He ages from a modeled terrestrial impact crater can then be used to evaluate parameters in the original numerical simulations, and refine the crater scaling relationships. We expect our methodology to additionally inform our interpretation of impact products, such as lunar impact breccias and meteorites, providing robust constraints on their thermal histories. In addition, the method is ideal for sample return mission planning - robust "prediction" of ages we expect from a given impact environment enhances our ability to target sampling sites on the Moon, Mars or other solar system bodies where impacts have strongly

  3. Load event: Aircraft crash

    International Nuclear Information System (INIS)

    Fritsch, H.

    1985-01-01

    The bibliography includes 48 quotations, up to the year 1983, on the following issues: Experiments and computational methods. Design load for the dimensioning of reinforced concrete buildings and components with respect to the dynamic load in the event of an aircraft crash. (orig./HP) [de

  4. Phantom crash confirms models

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    To test computer models of how a nuclear reactor's containment building would fare if an airplane crashed into it, the Muto Institute in Tokyo sponsored a 3.2 million dollar project at Sandia National Laboratory to slam an F-4 Phantom jet into a 500 ton concrete wall. The results showed that the computer calculations were accurate

  5. Advances in Crash Response

    Centers for Disease Control (CDC) Podcasts

    In this podcast, Dr. Richard C. Hunt, Director of CDC's Division of Injury Response, provides an overview on the benefits of using an Advanced Automatic Collision Notification system, or AACN, to help with emergency triage of people injured in vehicle crashes.

  6. Numerical simulation of a high velocity impact on fiber reinforced materials

    International Nuclear Information System (INIS)

    Thoma, Klaus; Vinckier, David

    1994-01-01

    Whereas the calculation of a high velocity impact on isotropical materials can be done on a routine basis, the simulation of the impact and penetration process into nonisotropical materials such as reinforced concrete or fiber reinforced materials still is a research task.We present the calculation of an impact of a metallic fragment on a modern protective wall structure. Such lightweight protective walls typically consist of two layers, a first outer layer made out of a material with high hardness and a backing layer. The materials for the backing layer are preferably fiber reinforced materials. Such types of walls offer a protection against fragments in a wide velocity range.For our calculations we used a non-linear finite element Lagrange code with explicit time integration. To be able to simulate the high velocity penetration process with a continuous erosion of the impacting metallic fragment, we used our newly developed contact algorithm with eroding surfaces. This contact algorithm is vectorized to a high degree and especially robust as it was developed to work for a wide range of contact-impact problems. To model the behavior of the fiber reinforced material under the highly dynamic loads, we present a material model which initially was developed to calculate the crash behavior (automotive applications) of modern high strength fiber-matrix systems. The model can describe the failure and the postfailure behavior up to complete material crushing.A detailed simulation shows the impact of a metallic fragment with a velocity of 750ms -1 on a protective wall with two layers, the deformation and erosion of fragment and wall material and the failure of the fiber reinforced material. ((orig.))

  7. Airplane crash simulations

    International Nuclear Information System (INIS)

    Jovall, Ola

    2007-01-01

    Impact loads are considered in nuclear facility design as the result of the loading effects of certain design basis accidents and design basis threats made up of natural as well as man-made hazards. Also, beyond design basis accidents and threats are considered. Typical missiles include objects caused by tornado winds, aircrafts, war or terrorist activities, dropped objects, turbine fragments and other missiles resulting from failure of rotating equipment and whipping pipes and other objects of failure of pressurized fluid systems. The aim of the work is to study the potential of tools for numerical simulations to study the local load effects of airplane missiles impacting concrete structures. Two of the leading commercial computer codes for analysis of highly dynamic events, ABAQUS/Explicit and AUTODYN, have been evaluated. Numerical simulations have been carried out for rigid as well as deformable missiles with the characteristics of airplane engines. The analysis results have been compared with test results from a test program performed in the USA at Sandia National Laboratory and in Japan at Kobori Research Complex and Central Research Institute of the Electric Power industry. Finally, numerical simulations of a large passenger airliner impacting a reactor containment has been carried out using the analysis methodology developed. (author)

  8. Narrative text analysis to identify technologies to prevent motor vehicle crashes: examples from military vehicles.

    Science.gov (United States)

    Pollack, Keshia M; Yee, Nathan; Canham-Chervak, Michelle; Rossen, Lauren; Bachynski, Kathleen E; Baker, Susan P

    2013-02-01

    The purpose of this research is to describe the leading circumstances of military vehicle crashes to guide prioritization and implementation of crash avoidance and/or warning technologies. A descriptive study using narrative text analysis on 3,944 military vehicle crash narratives. Crash data on drivers, from 2001 to 2006, were assembled from the U.S. Army Combat Readiness/Safety Center. Reviewers collected information on the circumstances of crashes and determined if vehicle technology could have prevented the crash. Nearly 98% of the crashes were nonfatal; 63% occurred in the U.S. and 24% in Iraq. Among crash events where the direction of the impact was recorded, 32% were to the front of the vehicle and 16% involved a vehicle being rear-ended. Rollovers were mentioned in 20% of the narratives. Technology was determined to have the potential to prevent 26% of the crashes, with the forward collision warning system, rear end collision avoidance, emergency brake assistance, and rollover stability control system likely to have the greatest impacts. Some technologies available for civilian vehicles may prevent certain military crash circumstances. The results of this research are significant in light of ongoing global military operations that rely on military vehicles. Improving the preventive technology featured on military vehicles may be an effective strategy to reduce the occurrence of military crashes. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Validation of Vibro-Impact Force Models by Numerical Simulation, Perturbation Methods and Experiments

    DEFF Research Database (Denmark)

    de Souza Reboucas, Geraldo Francisco; Santos, Ilmar; Thomsen, Jon Juel

    2017-01-01

    The frequency response of a single degree of freedom vibro-impact oscillator is analyzed using Harmonic Linearization, Averaging and Numeric Simulation, considering three different impact force models: one given by a piecewise-linear function (Kelvin-Voigt model), another by a high-order power...

  10. Experimental validation of vibro-impact force models using numeric simulation and perturbation methods

    DEFF Research Database (Denmark)

    de Souza Reboucas, Geraldo Francisco; Santos, Ilmar; Thomsen, Jon Juel

    2017-01-01

    The frequency response of a single-degree of freedom vibro-impact oscillator is analysed using Harmonic Linearization, Averaging and Numeric Simulations considering two different impact force models, one given by a piecewise-linear function and other by a high-order polynomial. Experimental...

  11. Numerical simulation of tornado-borne missile impact on reinforced concrete targets

    International Nuclear Information System (INIS)

    Tu, D.K.; Larder, R.

    1979-02-01

    This study is a continuation of the Lawrence Livermore Laboratory (LLL) effort to evaluate the applicability of using the finite element procedure to numerically simulate the impact of tornado-borne missiles on reinforced concrete targets. The objective of this study is to assess the back-face scab threshold of a reinforced concrete target impacted by deformable and nondeformable missiles. Several simulations were run using slug and pipe-type impacting missiles. The numerical results were compared with full-scale experimental field tests

  12. A numerical calculation method of environmental impacts for the deep sea mining industry - a review.

    Science.gov (United States)

    Ma, Wenbin; van Rhee, Cees; Schott, Dingena

    2018-03-01

    Since the gradual decrease of mineral resources on-land, deep sea mining (DSM) is becoming an urgent and important emerging activity in the world. However, until now there has been no commercial scale DSM project in progress. Together with the reasons of technological feasibility and economic profitability, the environmental impact is one of the major parameters hindering its industrialization. Most of the DSM environmental impact research focuses on only one particular aspect ignoring that all the DSM environmental impacts are related to each other. The objective of this work is to propose a framework for the numerical calculation methods of the integrated DSM environmental impacts through a literature review. This paper covers three parts: (i) definition and importance description of different DSM environmental impacts; (ii) description of the existing numerical calculation methods for different environmental impacts; (iii) selection of a numerical calculation method based on the selected criteria. The research conducted in this paper provides a clear numerical calculation framework for DSM environmental impact and could be helpful to speed up the industrialization process of the DSM industry.

  13. Solutions for acceleration measurement in vehicle crash tests

    Science.gov (United States)

    Dima, D. S.; Covaciu, D.

    2017-10-01

    Crash tests are useful for validating computer simulations of road traffic accidents. One of the most important parameters measured is the acceleration. The evolution of acceleration versus time, during a crash test, form a crash pulse. The correctness of the crash pulse determination depends on the data acquisition system used. Recommendations regarding the instrumentation for impact tests are given in standards, which are focused on the use of accelerometers as impact sensors. The goal of this paper is to present the device and software developed by authors for data acquisition and processing. The system includes two accelerometers with different input ranges, a processing unit based on a 32-bit microcontroller and a data logging unit with SD card. Data collected on card, as text files, is processed with a dedicated software running on personal computers. The processing is based on diagrams and includes the digital filters recommended in standards.

  14. COMPARISON OF SEVERITY AFFECTING FACTORS BETWEEN YOUNG AND OLDER DRIVERS INVOLVED IN SINGLE VEHICLE CRASHES

    Directory of Open Access Journals (Sweden)

    Sunanda DISSANAYAKE, Ph.D., P.E.

    2004-01-01

    Full Text Available Single vehicle crashes contribute to a significant amount of fatalities in the United States. At the same time, fatality crash involvement rates of young and older drivers are well above the average and both groups are identified as critical groups when it comes to highway safety. Therefore, the study described in this paper developed separate models to predict crash severity of single vehicle crashes by young and older drivers. By using the models, factors affecting towards increased crash severity were identified for each group and comparisons were made. Almost all the common identified factors influenced both driver groups in the same manner except in the case of alcohol and drug usage, which indicated an interesting finding in the case of crash severity of older drivers. Speeding and non-usage of a restraint device were the two most important factors affecting towards increased crash severity for both driver groups at all severity levels. Additionally, ejection and existence of curve/grade were determinants of higher young driver crash severity at all levels. For older drivers, having a frontal impact point was a severity determinant at all levels. County of residence and weather condition were not effective in making any changes with respect to crash severity at any level, while some other factors had a minimal affect. Findings of this study are beneficial in investigating the potential ways of reducing crash severity, which could also be influential in reducing the occurrence of crashes as well.

  15. Perbandingan Stock Market Crash 1987 : Dan Stock Market Crash 1997

    OpenAIRE

    Indridewi Atmadjaja, Yovita Vivianty

    1999-01-01

    Stock market crash refers to the condition, which is marked with the large dropping of stock Market price index. Historically, stock market crash has happened three times, namely in 1929, 1987 and 1997. This paper will discuss the causes of 1987's and 1997's stock market Crash and the similarities and the differences between 1987's and 1997's stock market crash. The structure of the paper is as follows. The paper starts with the introduction. The second Section briefly explains the causes of ...

  16. Advances in Crash Response

    Centers for Disease Control (CDC) Podcasts

    2009-06-29

    In this podcast, Dr. Richard C. Hunt, Director of CDC's Division of Injury Response, provides an overview on the benefits of using an Advanced Automatic Collision Notification system, or AACN, to help with emergency triage of people injured in vehicle crashes.  Created: 6/29/2009 by National Center for Injury Prevention and Control (NCIPC), Division of Injury Response (DIR).   Date Released: 6/29/2009.

  17. Model experiment and numerical simulation of drop impact response of multilayer-combinational container

    International Nuclear Information System (INIS)

    Xie Ruoze; Zhong Weizhou; Wan Qiang; Huang Xicheng; Zhang Fangju

    2015-01-01

    The drop impact process of multilayer-combinational container was simulated experimentally using a gas gun, and the normal impact and oblique impact of scaled models were tested. The experiments of scaled models were simulated numerically, and the stress distribution and plastic deformation in the tested structures during collision process were obtained. The results were compared with the experiment data. It was shown that the impact work mainly converted into plastic work due to the plastic deformation of the cushion wood and the plastic hinge in the buckled steel shell. The plastic deformation mainly happened at the collided end of the scaled models, and there was no plastic deformation found far from the collided end. The compressive stress-strain curve of the wood in texture direction can be used to simulate numerically the drop impact process of multilayer-combinational container. (authors)

  18. Piercing of the containment shell of a reactor building in case of airplane crash

    International Nuclear Information System (INIS)

    Herzog, M.

    1978-01-01

    The author presents a simple calculation model for a realistic check of the piercing safety of containments of reactor buildings in case of airplane crash. Its application is illustrated by a numerical example (Starfighter crash on the Unterweser nuclear power plant). (orig.) [de

  19. Large truck and bus crash facts, 2010.

    Science.gov (United States)

    2012-09-01

    This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2010. Selected crash statistics on passenger : vehicles are also presen...

  20. Large truck and bus crash facts, 2012.

    Science.gov (United States)

    2014-06-01

    This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks and buses in 2012. Selected crash statistics on passenger vehicles are also presented ...

  1. Large truck and bus crash facts, 2013.

    Science.gov (United States)

    2015-04-01

    This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks and buses in 2013. Selected crash statistics on passenger vehicles are also presented ...

  2. Large truck and bus crash facts, 2009.

    Science.gov (United States)

    2011-10-01

    This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2009. Selected crash statistics on passenger : vehicles are also presen...

  3. Large truck and bus crash facts, 2011.

    Science.gov (United States)

    2013-10-01

    This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2011. Selected crash statistics on passenger : vehicles are also presen...

  4. Omitted variable bias in crash reduction factors.

    Science.gov (United States)

    2015-09-01

    Transportation planners and traffic engineers are increasingly turning to crash reduction factors to evaluate changes in road : geometric and design features in order to reduce crashes. Crash reduction factors are typically estimated based on segment...

  5. Nuclear containment structure subjected to commercial and fighter aircraft crash

    International Nuclear Information System (INIS)

    Sadique, M.R.; Iqbal, M.A.; Bhargava, P.

    2013-01-01

    Highlights: • Nuclear containment response has been studied against aircraft crash. • Concrete damaged plasticity and Johnson–Cook elasto-viscoplastic models were employed. • Boeing 747-400 and Boeing 767-400 aircrafts caused global failure of containment. • Airbus A320 and Boeing 707-320 aircrafts caused local damage. • Tension damage of concrete was found more prominent compared to compression damage. -- Abstract: The response of a boiling water reactor (BWR) nuclear containment vessel has been studied against commercial and fighter aircraft crash using a nonlinear finite element code ABAQUS. The aircrafts employed were Boeing 747-400, Boeing 767-400, Airbus A-320, Boeing 707-320 and Phantom F4. The containment was modeled as a three-dimensional deformable reinforced concrete structure while the loading of aircraft was assigned using the respective reaction–time curve. The location of strike was considered near the junction of dome and cylinder, and the angle of incidence, normal to the containment surface. The material behavior of the concrete was incorporated using the damaged plasticity model while that of the reinforcement, the Johnson–Cook elasto-viscoplastic model. The containment could not sustain the impact of Boeing 747-400 and Boeing 767-400 aircrafts and suffered rupture of concrete around the impact region leading to global failure. On the other hand, the maximum local deformation at the point of impact was found to be 0.998 m, 0.099 m, 0.092 m, 0.089 m, and 0.074 m against Boeing 747-400, Phantom F4, Boeing 767, Boeing 707-320 and Airbus A-320 aircrafts respectively. The results of the present study were compared with those of the previous analytical and numerical investigations with respect to the maximum deformation and overall behavior of the containment

  6. Nuclear containment structure subjected to commercial and fighter aircraft crash

    Energy Technology Data Exchange (ETDEWEB)

    Sadique, M.R., E-mail: rehan.sadique@gmail.com; Iqbal, M.A., E-mail: iqbalfce@iitr.ernet.in; Bhargava, P., E-mail: bhpdpfce@iitr.ernet.in

    2013-07-15

    Highlights: • Nuclear containment response has been studied against aircraft crash. • Concrete damaged plasticity and Johnson–Cook elasto-viscoplastic models were employed. • Boeing 747-400 and Boeing 767-400 aircrafts caused global failure of containment. • Airbus A320 and Boeing 707-320 aircrafts caused local damage. • Tension damage of concrete was found more prominent compared to compression damage. -- Abstract: The response of a boiling water reactor (BWR) nuclear containment vessel has been studied against commercial and fighter aircraft crash using a nonlinear finite element code ABAQUS. The aircrafts employed were Boeing 747-400, Boeing 767-400, Airbus A-320, Boeing 707-320 and Phantom F4. The containment was modeled as a three-dimensional deformable reinforced concrete structure while the loading of aircraft was assigned using the respective reaction–time curve. The location of strike was considered near the junction of dome and cylinder, and the angle of incidence, normal to the containment surface. The material behavior of the concrete was incorporated using the damaged plasticity model while that of the reinforcement, the Johnson–Cook elasto-viscoplastic model. The containment could not sustain the impact of Boeing 747-400 and Boeing 767-400 aircrafts and suffered rupture of concrete around the impact region leading to global failure. On the other hand, the maximum local deformation at the point of impact was found to be 0.998 m, 0.099 m, 0.092 m, 0.089 m, and 0.074 m against Boeing 747-400, Phantom F4, Boeing 767, Boeing 707-320 and Airbus A-320 aircrafts respectively. The results of the present study were compared with those of the previous analytical and numerical investigations with respect to the maximum deformation and overall behavior of the containment.

  7. Crash Prediction and Risk Evaluation Based on Traffic Analysis Zones

    Directory of Open Access Journals (Sweden)

    Cuiping Zhang

    2014-01-01

    Full Text Available Traffic safety evaluation for traffic analysis zones (TAZs plays an important role in transportation safety planning and long-range transportation plan development. This paper aims to present a comprehensive analysis of zonal safety evaluation. First, several criteria are proposed to measure the crash risk at zonal level. Then these criteria are integrated into one measure-average hazard index (AHI, which is used to identify unsafe zones. In addition, the study develops a negative binomial regression model to statistically estimate significant factors for the unsafe zones. The model results indicate that the zonal crash frequency can be associated with several social-economic, demographic, and transportation system factors. The impact of these significant factors on zonal crash is also discussed. The finding of this study suggests that safety evaluation and estimation might benefit engineers and decision makers in identifying high crash locations for potential safety improvements.

  8. Why Do Markets Crash? Bitcoin Data Offers Unprecedented Insights

    Science.gov (United States)

    Donier, Jonathan; Bouchaud, Jean-Philippe

    2015-01-01

    Crashes have fascinated and baffled many canny observers of financial markets. In the strict orthodoxy of the efficient market theory, crashes must be due to sudden changes of the fundamental valuation of assets. However, detailed empirical studies suggest that large price jumps cannot be explained by news and are the result of endogenous feedback loops. Although plausible, a clear-cut empirical evidence for such a scenario is still lacking. Here we show how crashes are conditioned by the market liquidity, for which we propose a new measure inspired by recent theories of market impact and based on readily available, public information. Our results open the possibility of a dynamical evaluation of liquidity risk and early warning signs of market instabilities, and could lead to a quantitative description of the mechanisms leading to market crashes. PMID:26448333

  9. Why Do Markets Crash? Bitcoin Data Offers Unprecedented Insights.

    Science.gov (United States)

    Donier, Jonathan; Bouchaud, Jean-Philippe

    2015-01-01

    Crashes have fascinated and baffled many canny observers of financial markets. In the strict orthodoxy of the efficient market theory, crashes must be due to sudden changes of the fundamental valuation of assets. However, detailed empirical studies suggest that large price jumps cannot be explained by news and are the result of endogenous feedback loops. Although plausible, a clear-cut empirical evidence for such a scenario is still lacking. Here we show how crashes are conditioned by the market liquidity, for which we propose a new measure inspired by recent theories of market impact and based on readily available, public information. Our results open the possibility of a dynamical evaluation of liquidity risk and early warning signs of market instabilities, and could lead to a quantitative description of the mechanisms leading to market crashes.

  10. Why Do Markets Crash? Bitcoin Data Offers Unprecedented Insights.

    Directory of Open Access Journals (Sweden)

    Jonathan Donier

    Full Text Available Crashes have fascinated and baffled many canny observers of financial markets. In the strict orthodoxy of the efficient market theory, crashes must be due to sudden changes of the fundamental valuation of assets. However, detailed empirical studies suggest that large price jumps cannot be explained by news and are the result of endogenous feedback loops. Although plausible, a clear-cut empirical evidence for such a scenario is still lacking. Here we show how crashes are conditioned by the market liquidity, for which we propose a new measure inspired by recent theories of market impact and based on readily available, public information. Our results open the possibility of a dynamical evaluation of liquidity risk and early warning signs of market instabilities, and could lead to a quantitative description of the mechanisms leading to market crashes.

  11. Statistical modeling of total crash frequency at highway intersections

    Directory of Open Access Journals (Sweden)

    Arash M. Roshandeh

    2016-04-01

    Full Text Available Intersection-related crashes are associated with high proportion of accidents involving drivers, occupants, pedestrians, and cyclists. In general, the purpose of intersection safety analysis is to determine the impact of safety-related variables on pedestrians, cyclists and vehicles, so as to facilitate the design of effective and efficient countermeasure strategies to improve safety at intersections. This study investigates the effects of traffic, environmental, intersection geometric and pavement-related characteristics on total crash frequencies at intersections. A random-parameter Poisson model was used with crash data from 357 signalized intersections in Chicago from 2004 to 2010. The results indicate that out of the identified factors, evening peak period traffic volume, pavement condition, and unlighted intersections have the greatest effects on crash frequencies. Overall, the results seek to suggest that, in order to improve effective highway-related safety countermeasures at intersections, significant attention must be focused on ensuring that pavements are adequately maintained and intersections should be well lighted. It needs to be mentioned that, projects could be implemented at and around the study intersections during the study period (7 years, which could affect the crash frequency over the time. This is an important variable which could be a part of the future studies to investigate the impacts of safety-related works at intersections and their marginal effects on crash frequency at signalized intersections.

  12. Connected motorcycle crash warning interfaces.

    Science.gov (United States)

    2016-01-15

    Crash warning systems have been deployed in the high-end vehicle market segment for some time and are trickling down to additional motor vehicle industry segments each year. The motorcycle segment, however, has no deployed crash warning system to dat...

  13. Resisting "Crash Diet" Staff Development

    Science.gov (United States)

    Dana, Nancy Fichtman; Yendol-Hoppey, Diane

    2008-01-01

    People often respond to the pressure of attending a high school reunion or their child's wedding by going on a crash diet to get quick results. In response, friends may marvel about how good they look on the outside. But what folks don't acknowledge is that, in the name of getting results, crash dieters have done some very unhealthy things to…

  14. Mitigating Wind Induced Truck Crashes

    Science.gov (United States)

    2009-12-25

    Dangerous weather and high wind in particular, is a common contributing factor in truck crashes. High wind speeds have been documented as a perennial cause of truck crashes in Kansas and other Great Plains states. The possibility of reducing such cra...

  15. Numerical simulation of 900 MW control rods impact friction vibration and wear

    International Nuclear Information System (INIS)

    Jacquart, G.

    1993-12-01

    Impact-friction vibrations and wear have motivated a great research and development program aiming at understanding the impact and vibration behaviour of these components through experimental and numerical works. This report presents a numerical simulation of the vibrations of a single control rod and of a whole control cluster. Excitation sources for this component are due to hydraulic forces and are situated in the lower part of the rods and in the part of the cluster. Some parametric computations have been carried out on a single rod, to evaluate the effect of the lower excitation source. Different excitation levels, different eccentricities or static forces have been computed and compared to measurements on the MAGALY mock-up representing a complete rod cluster. A numerical model for the complete cluster allowed the evaluation of the upper excitation source effects. This source appears to be less powerful than the lower one. These results have been validated by comparison with MAGALY measurements. At last, some computations were performed with a model of the complete cluster, taking into account the both excitation sources. A parametric study on eccentricity and static forces has been carried out. A comparison with MAGALY measurements seems to be fairly fitting, showing that the numerical results are of the right order of magnitude. Through this numerical study, we have shown that numerical simulation of a complete control rod cluster could be lead, and we have obtained some new informations about impact forces and wear rates that need to be confirmed by more computational or experimental works or in-situ measurements. (author). 10 annexes, 11 refs

  16. Impact of Helmet Use on Injury and Financial Burden of Motorcycle and Moped Crashes in Hawai‘i: Analysis of a Linked Statewide Database

    Science.gov (United States)

    Castel, Nikki A; Wong, Linda L; Steinemann, Susan

    2016-01-01

    Helmet use reduces injury severity, disability, hospital length of stay, and hospital charges in motorcycle riders. The public absorbs billions of dollars annually in hospital charges for unhelmeted, uninsured motorcycle riders. We sought to quantify, on a statewide level, the healthcare burden of unhelmeted motorcycle and moped riders. We examined 1,965 emergency medical service (EMS) reports from motorcycle and moped crashes in Hawai‘i between 2007–2009. EMS records were linked to hospital medical records to assess associations between vehicle type, helmet use, medical charges, diagnoses, and final disposition. Unhelmeted riders of either type of vehicle suffered more head injuries, especially skull fractures (adjusted odds ratio (OR) of 4.48, P motorcycle and moped riders, with a significant (P = .006) difference between helmeted ($27,176) and unhelmeted ($40,217) motorcycle riders. Unhelmeted riders were twice as likely to self-pay (19.3%, versus 9.8% of helmeted riders), and more likely to have Medicaid or a similar income-qualifying insurance plan (13.5% versus 5.0%, respectively). Protective associations with helmet use are stronger among motorcyclists than moped riders, suggesting the protective effect is augmented in higher speed crashes. The public financial burden is higher from unhelmeted riders who sustain more severe injuries and are less likely to be insured. PMID:27980882

  17. Investigation of time and weather effects on crash types using full Bayesian multivariate Poisson lognormal models.

    Science.gov (United States)

    El-Basyouny, Karim; Barua, Sudip; Islam, Md Tazul

    2014-12-01

    Previous research shows that various weather elements have significant effects on crash occurrence and risk; however, little is known about how these elements affect different crash types. Consequently, this study investigates the impact of weather elements and sudden extreme snow or rain weather changes on crash type. Multivariate models were used for seven crash types using five years of daily weather and crash data collected for the entire City of Edmonton. In addition, the yearly trend and random variation of parameters across the years were analyzed by using four different modeling formulations. The proposed models were estimated in a full Bayesian context via Markov Chain Monte Carlo simulation. The multivariate Poisson lognormal model with yearly varying coefficients provided the best fit for the data according to Deviance Information Criteria. Overall, results showed that temperature and snowfall were statistically significant with intuitive signs (crashes decrease with increasing temperature; crashes increase as snowfall intensity increases) for all crash types, while rainfall was mostly insignificant. Previous snow showed mixed results, being statistically significant and positively related to certain crash types, while negatively related or insignificant in other cases. Maximum wind gust speed was found mostly insignificant with a few exceptions that were positively related to crash type. Major snow or rain events following a dry weather condition were highly significant and positively related to three crash types: Follow-Too-Close, Stop-Sign-Violation, and Ran-Off-Road crashes. The day-of-the-week dummy variables were statistically significant, indicating a possible weekly variation in exposure. Transportation authorities might use the above results to improve road safety by providing drivers with information regarding the risk of certain crash types for a particular weather condition. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Braking news: link between crash severity and crash avoidance maneuvers

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2012-01-01

    across severity levels were estimated to accommodate the ordered-response nature of severity. The sample used for estimation consisted of data for single-vehicle crashes extracted from the General Estimates System crash database for the period from 2005 to 2009. Results showed the correlation between...... of lower crash severity. These trends suggest that efforts to understand the mechanisms of reactions to different critical events should be made to improve in-vehicle warning systems, promote responsible driving behavior, and design forgiving infrastructures....

  19. Predicting brain mechanics during closed head impact : numerical and constitutive aspects

    NARCIS (Netherlands)

    Brands, D.W.A.

    2002-01-01

    Annually, motor vehicle crashes world wide cause over a million fatalities and over a hundred million injuries. Of all body parts, the head is identified as the body region most frequently involved in life-threatening injury. To understand how the brain gets injured during an accident, the

  20. Numerical studies of deuterium-tritium ignition in impact-fusion targets

    International Nuclear Information System (INIS)

    Zubrin, R.M.; Ribe, F.L.

    1989-01-01

    A numerical one-dimensional solution of the Euler equations for an imploding spherical tungsten shell with internal deuterium-tritium gas is applied to study impact-fusion dynamics with parameters of fusion reactor relevance. Thermal conduction and radiative energy loss by the plasma are taken into account, as is heating by fusion generated alpha particles. A variety of target sizes and impact velocities are examined, and scaling laws for fusion yields are deduced which define possible parameters for conceptual commercial impact-fusion power reactors. It is found that shell energies and velocities of about 30 MJ and 110 km/s would be satisfactory. A commercial impact-fusion reactor based on such parameters is discussed

  1. A Numerical Study on Impact of Taiwan Island Surface Heat Flux on Super Typhoon Haitang (2005)

    OpenAIRE

    Xu, Hongxiong

    2015-01-01

    Three to four tropical cyclones (TCs) by average usually impact Taiwan every year. This study, using the Developmental Tested Center (DTC) version of the Hurricane WRF (HWRF) model, examines the effects of Taiwan’s island surface heat fluxes on typhoon structure, intensity, track, and its rainfall over the island. The numerical simulation successfully reproduced the structure and intensity of super Typhoon Haitang. The model, especially, reproduced the looped path and landfall at nearly the ...

  2. An experimental and numerical investigation of head dynamics due to stick impacts in girls' lacrosse.

    Science.gov (United States)

    Morse, Justin D; Franck, Jennifer A; Wilcox, Bethany J; Crisco, Joseph J; Franck, Christian

    2014-12-01

    A method of investigating head acceleration and intracranial dynamics from stick impacts in girls' and women's lacrosse was developed using headform impact experiments and a finite element head model. Assessing the likelihood of head injury due to stick-head impacts is of interest in girls' and women's lacrosse due to the current lack of head protection during play. Experimental and simulation data were compared to characterize the head acceleration caused by stick-head impacts. Validation against cadaver head impact experiments ensures that the finite element model, with its relatively simple material properties, can provide means to develop a better understanding of the intracranial dynamics during lacrosse stick impacts. Our numerical results showed the peak acceleration at the center of gravity increased linearly with impact force, and was generally in agreement with the experimental data. von Mises stresses and peak principal strains, two common literature injury indicators, were examined within the finite element model, and peak values were below the previously reported thresholds for mild traumatic brain injury. By reconstructing typical in-game, unprotected stick-head impacts, this investigation lays the foundation for a quantitative methodology of injury prediction in girls' and womens' lacrosse.

  3. Seismo-Acoustic Numerical Investigation of Land Impacts, Water Impacts, or Air Bursts of Asteroids

    Science.gov (United States)

    Ezzedine, S. M.; Dearborn, D. S.; Miller, P. L.

    2017-12-01

    The annual probability of an asteroid impact is low, but over time, such catastrophic events are inevitable. Interest in assessing the impact consequences has led us to develop a physics-based framework to seamlessly simulate the event from entry to impact, including air, water and ground shock propagation and wave generation. The non-linear effects are simulated using the hydrodynamics code GEODYN. As effects propagate outward, they become a wave source for the linear-elastic-wave propagation code and simulated using SAW or SWWP, depends on whether the asteroid impacts the land or the ocean, respectively. The GEODYN-SAW-SWWP coupling is based on the structured adaptive-mesh-refinement infrastructure, SAMRAI, and has been used in FEMA table-top exercises conducted in 2013 and 2014, and more recently, the 2015 Planetary Defense Conference exercise. Moreover, during atmospheric entry, asteroids create an acoustic trace that could be used to infer several physical characteristics of asteroid itself. Using SAW we explore the physical space parameters in order to rank the most important characteristics; Results from these simulations provide an estimate of onshore and offshore effects and can inform more sophisticated inundation and structural models. The capabilities of this methodology are illustrated by providing results for different impact locations, and an exploration of asteroid size on the waves arriving at the shoreline of area cities. We constructed the maximum and minimum envelops of water-wave heights or acceleration spectra given the size of the asteroid and the location of the impact along the risk corridor. Such profiles can inform emergency response and disaster-mitigation efforts. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  4. Statistical analysis of vehicle crashes in Mississippi based on crash data from 2010 to 2014.

    Science.gov (United States)

    2017-08-15

    Traffic crash data from 2010 to 2014 were collected by Mississippi Department of Transportation (MDOT) and extracted for the study. Three tasks were conducted in this study: (1) geographic distribution of crashes; (2) descriptive statistics of crash ...

  5. Intelligent geocoding system to locate traffic crashes.

    Science.gov (United States)

    Qin, Xiao; Parker, Steven; Liu, Yi; Graettinger, Andrew J; Forde, Susie

    2013-01-01

    State agencies continue to face many challenges associated with new federal crash safety and highway performance monitoring requirements that use data from multiple and disparate systems across different platforms and locations. On a national level, the federal government has a long-term vision for State Departments of Transportation (DOTs) to report state route and off-state route crash data in a single network. In general, crashes occurring on state-owned or state maintained highways are a priority at the Federal and State level; therefore, state-route crashes are being geocoded by state DOTs. On the other hand, crashes occurring on off-state highway system do not always get geocoded due to limited resources and techniques. Creating and maintaining a statewide crash geographic information systems (GIS) map with state route and non-state route crashes is a complicated and expensive task. This study introduces an automatic crash mapping process, Crash-Mapping Automation Tool (C-MAT), where an algorithm translates location information from a police report crash record to a geospatial map and creates a pinpoint map for all crashes. The algorithm has approximate 83 percent mapping rate. An important application of this work is the ability to associate the mapped crash records to underlying business data, such as roadway inventory and traffic volumes. The integrated crash map is the foundation for effective and efficient crash analyzes to prevent highway crashes. Published by Elsevier Ltd.

  6. Quantitative impact of aerosols on numerical weather prediction. Part II: Impacts to IR radiance assimilation

    Science.gov (United States)

    Marquis, J. W.; Campbell, J. R.; Oyola, M. I.; Ruston, B. C.; Zhang, J.

    2017-12-01

    This is part II of a two-part series examining the impacts of aerosol particles on weather forecasts. In this study, the aerosol indirect effects on weather forecasts are explored by examining the temperature and moisture analysis associated with assimilating dust contaminated hyperspectral infrared radiances. The dust induced temperature and moisture biases are quantified for different aerosol vertical distribution and loading scenarios. The overall impacts of dust contamination on temperature and moisture forecasts are quantified over the west coast of Africa, with the assistance of aerosol retrievals from AERONET, MPL, and CALIOP. At last, methods for improving hyperspectral infrared data assimilation in dust contaminated regions are proposed.

  7. Alcohol and older drivers' crashes.

    Science.gov (United States)

    2014-09-01

    Researchers have examined the effects of alcohol consumption : on older adults functioning, and some have : addressed alcohols effects on older drivers crash risk. : Generally, the findings have shown that alcohol is less : likely to be a fa...

  8. Improving freight crash incident management.

    Science.gov (United States)

    2015-06-01

    The objective of this study was to determine the most effective way to mitigate the effect of freight : crash incidents on Louisiana freeways. Candidate incident management strategies were reviewed from : practice in other states and from those publi...

  9. Crash course in readers' advisory

    CERN Document Server

    Orr, Cynthia

    2014-01-01

    One of the key services librarians provide is helping readers find books they'll enjoy. This ""crash course"" will furnish you with the basic, practical information you need to excel at readers' advisory (RA) for adults and teens.

  10. A Numerical/Experimental Study on the Impact and CAI Behaviour of Glass Reinforced Compsite Plates

    Science.gov (United States)

    Perillo, Giovanni; Jørgensen, Jens K.; Cristiano, Roberta; Riccio, Aniello

    2018-04-01

    This paper focuses on the development of an advance numerical model specifically for simulating low velocity impact events and related stiffness reduction on composite structures. The model is suitable for low cost thick composite structures like wind turbine blade and maritime vessels. The model consist of a combination of inter and intra laminar models. The intra-laminar model present a combination of Puck and Hashin failure theories for the evaluation of the fibre and matrix failure. The inter-laminar damage is instead simulated by Cohesive Zone Method based on energy approach. Basic material properties, easily measurable according to standardized tests, are required. The model has been used to simulate impact and compression after impact tests. Experimental tests have been carried out on thick E-Glass/Epoxy composite commonly used in the wind turbine industry. The clustering effect as well as the consequence of the impact energy have been experimentally tested. The accuracy of numerical model has been verified against experimental data showing a very good accuracy of the model.

  11. Overview of the Transport Rotorcraft Airframe Crash Testbed (TRACT) Full Scale Crash Tests

    Science.gov (United States)

    Annett, Martin; Littell, Justin

    2015-01-01

    The Transport Rotorcraft Airframe Crash Testbed (TRACT) full-scale tests were performed at NASA Langley Research Center's Landing and Impact Research Facility in 2013 and 2014. Two CH-46E airframes were impacted at 33-ft/s forward and 25-ft/s vertical combined velocities onto soft soil, which represents a severe, but potentially survivable impact scenario. TRACT 1 provided a baseline set of responses, while TRACT 2 included retrofits with composite subfloors and other crash system improvements based on TRACT 1. For TRACT 2, a total of 18 unique experiments were conducted to evaluate Anthropomorphic Test Devices (ATD) responses, seat and restraint performance, cargo restraint effectiveness, patient litter behavior, and activation of emergency locator transmitters and crash sensors. Combinations of Hybrid II, Hybrid III, and ES-2 ATDs were placed in forward and side facing seats and occupant results were compared against injury criteria. The structural response of the airframe was assessed based on accelerometers located throughout the airframe and using three-dimensional photogrammetric techniques. Analysis of the photogrammetric data indicated regions of maximum deflection and permanent deformation. The response of TRACT 2 was noticeably different in the horizontal direction due to changes in the cabin configuration and soil surface, with higher acceleration and damage occurring in the cabin. Loads from ATDs in energy absorbing seats and restraints were within injury limits. Severe injury was likely for ATDs in forward facing passenger seats.

  12. Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles.

    Science.gov (United States)

    Teoh, Eric R

    2018-07-04

    The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles. Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011-2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles. Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes. Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.

  13. A probabilistic approach for debris impact risk with numerical simulations of debris behaviors

    International Nuclear Information System (INIS)

    Kihara, Naoto; Matsuyama, Masafumi; Fujii, Naoki

    2013-01-01

    We propose a probabilistic approach for evaluating the impact risk of tsunami debris through Monte Carlo simulations with a combined system comprising a depth-averaged two-dimensional shallow water model and a discrete element model customized to simulate the motions of floating objects such as vessels. In the proposed method, first, probabilistic tsunami hazard analysis is carried out, and the exceedance probability of tsunami height and numerous tsunami time series for various hazard levels on the offshore side of a target site are estimated. Second, a characteristic tsunami time series for each hazard level is created by cluster analysis. Third, using the Monte Carlo simulation model the debris impact probability with the buildings of interest and the exceedance probability of debris impact speed are evaluated. (author)

  14. Experimental and numerical study of water-filled vessel impacted by flat projectiles

    Science.gov (United States)

    Zhang, Wei; Ren, Peng; Huang, Wei; Gao, Yu Bo

    2014-05-01

    To understand the failure modes and impact resistance of double-layer plates separated by water, a flat-nosed projectile was accelerated by a two-stage light gas gun against a water-filled vessel which was placed in an air-filled tank. Targets consisted of a tank made of two flat 5A06 aluminum alloy plates held by a high strength steel frame. The penetration process was recorded by a digital high-speed camera. The same projectile-target system was also used to fire the targets placed directly in air for comparison. Parallel numerical tests were also carried out. The result indicated that experimental and numerical results were in good agreement. Numerical simulations were able to capture the main physical behavior. It was also found that the impact resistance of double layer plates separated by water was lager than that of the target plates in air. Tearing was the main failure models of the water-filled vessel targets which was different from that of the target plates in air where the shear plugging was in dominate.

  15. Numerical Study on the Projectile Impact Resistance of Multi-Layer Sandwich Panels with Cellular Cores

    Directory of Open Access Journals (Sweden)

    Liming Chen

    Full Text Available Abstract The projectile impact resistance of sandwich panels with cellular cores with different layer numbers has been numerically investigated by perpendicular impact of rigid blunt projectile in ABAQUS/Explicit. These panels with corrugation, hexagonal honeycomb and pyramidal truss cores are impacted at velocities between 50 m/s and 202 m/s while the relative density ranges from 0.001 to 0.15 The effects of core configuration and layer number on projectile impact resistance of sandwich panels with cellular cores are studied. At low impact velocity, sandwich panels with cellular cores outperform the corresponding solid ones and non-montonicity between relative density and projectile resistance of sandwich panels is found and analyzed. Multiplying layer can reduce the maximum central deflection of back face sheet of the above three sandwich panels except pyramidal truss ones in high relative density. Hexagonal honeycomb sandwich panel is beneficial to increasing layer numbers in lowering the contact force and prolonging the interaction time. At high impact velocity, though corrugation and honeycomb sandwich panels are inferior to the equal-weighted solid panels, pyramidal truss ones with high relative density outperform the corresponding solid panels. Multiplying layer is not the desirable way to improve high-velocity projectile resistance.

  16. Numerical Simulation of Shock Response and Dynamic Fracture of a Concrete Dam Subjected to Impact Load

    Directory of Open Access Journals (Sweden)

    Lu Lu

    2016-01-01

    Full Text Available The shock response and dynamic fracture of concrete gravity dams under impact load are the key problems to evaluate the antiknock safety of the dam. This study aims at understanding the effects of impact shock on the elastic response and dynamic fracture of concrete gravity dams. Firstly, this paper uses acceleration records of a concrete gravity dam under impact to establish the correct way to determine the concrete gravity dam of the fundamental frequency and present cut sheets multi-degree-of-freedom dynamic modeling. Under strong impact loading, the constitutive relation of concrete gravity dam and the highest frequency of the impact are uncertain. So, the main advantage of this method is avoiding the use of elastic modulus in the calculation. The result indicates that the calculation method is a reliable computational method for concrete gravity dams subjected to impact. Subsequently, the failure process of dam models was numerically simulated based on ABAQUS commercial codes. Finally, this paper puts forward suggestions for future research based on the results of the analysis.

  17. High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-up

    CERN Document Server

    Bertarelli, A; Carra, F; Cerutti, F; Dallocchio, A; Mariani, N; Timmins, M; Peroni, L; Scapin, M

    2011-01-01

    Beam Intercepting Devices are potentially exposed to severe accidental events triggered by direct impacts of energetic particle beams. State-of-the-art numerical methods are required to simulate the behaviour of affected components. A review of the different dynamic response regimes is presented, along with an indication of the most suited tools to treat each of them. The consequences on LHC tungsten collimators of a number of beam abort scenarios were extensively studied, resorting to a novel category of numerical explicit methods, named Hydrocodes. Full shower simulations were performed providing the energy deposition distribution. Structural dynamics and shock wave propagation analyses were carried out with varying beam parameters, identifying important thresholds for collimator operation, ranging from the onset of permanent damage up to catastrophic failure. Since the main limitation of these tools lies in the limited information available on constitutive material models under extreme conditions, a dedica...

  18. High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-Up

    CERN Document Server

    Bertarelli, A; Carra, F; Cerutti, F; Dallocchio, A; Mariani, N; Timmins, M; Peroni, L; Scapin, M

    2011-01-01

    Beam Intercepting Devices are potentially exposed to severe accidental events triggered by direct impacts of energetic particle beams. State-of-the-art numerical methods are required to simulate the behaviour of affected components. A review of the different dynamic response regimes is presented, along with an indication of the most suited tools to treat each of them. The consequences on LHC tungsten collimators of a number of beam abort scenarios were extensively studied, resorting to a novel category of numerical explicit methods, named Hydrocodes. Full shower simulations were performed providing the energy deposition distribution. Structural dynamics and shock wave propagation analyses were carried out with varying beam parameters, identifying important thresholds for collimator operation, ranging from the onset of permanent damage up to catastrophic failure. Since the main limitation of these tools lies in the limited information available on constitutive material models under extreme conditions, a dedica...

  19. Numerical Evaluation of a Light-Gas Gun Facility for Impact Test

    Directory of Open Access Journals (Sweden)

    C. Rahner

    2014-01-01

    Full Text Available Experimental tests which match the application conditions might be used to properly evaluate materials for specific applications. High velocity impacts can be simulated using light-gas gun facilities, which come in different types and complexities. In this work different setups for a one-stage light-gas gun facility have been numerically analyzed in order to evaluate their suitability for testing materials and composites used as armor protection. A maximal barrel length of 6 m and a maximal reservoir pressure of a standard industrial gas bottle (20 MPa were chosen as limitations. The numerical predictions show that it is not possible to accelerate the projectile directly to the desired velocity with nitrogen, helium, or hydrogen as propellant gas. When using a sabot corresponding to a higher bore diameter, the necessary velocity is achievable with helium and hydrogen gases.

  20. Numerical investigation of micro-pore formation during substrate impact of molten droplets in spraying processes

    International Nuclear Information System (INIS)

    Liu, H.; Lavernia, E.J.; Rangel, R.H.; Muehlberger, E.; Sickinger, A.

    1994-01-01

    The porosity that is commonly associated with discrete droplet processes, such as plasma spraying and spray deposition, effectively degrades the quality of the sprayed material. In the present study, micro-pore formation during the deformation and interaction of molten tungsten droplets impinging onto a flat substrate in spraying processes is numerically investigated. The numerical simulation is accomplished on the basis of the full Navier-Stokes equations and the Volume Of Fluid (VOF) function by using a 2-domain method for the thermal field and solidification problem and a two-phase flow continuum model for the flow problem with a growing solid layer. The possible mechanisms governing the formation of micro-pores are discussed. The effects of important processing parameters, such as droplet impact velocity, droplet temperature, substrate temperature, and droplet viscosity, on the micro-pore formation are addressed

  1. Numerical analysis of thermal impact on hydro-mechanical properties of clay

    Directory of Open Access Journals (Sweden)

    Xuerui Wang

    2014-10-01

    Full Text Available As is known, high-level radioactive waste (HLW is commonly heat-emitting. Heat output from HLW will dissipate through the surrounding rocks and induce complex thermo-hydro-mechanical-chemical (THMC processes. In highly consolidated clayey rocks, thermal effects are particularly significant because of their very low permeability and water-saturated state. Thermal impact on the integrity of the geological barriers is of most importance with regard to the long-term safety of repositories. This study focuses on numerical analysis of thermal effects on hydro-mechanical properties of clayey rock using a coupled thermo-mechanical multiphase flow (TH2M model which is implemented in the finite element programme OpenGeoSys (OGS. The material properties of the numerical model are characterised by a transversal isotropic elastic model based on Hooke's law, a non-isothermal multiphase flow model based on van Genuchten function and Darcy's law, and a transversal isotropic heat transport model based on Fourier's law. In the numerical approaches, special attention has been paid to the thermal expansion of three different phases: gas, fluid and solid, which could induce changes in pore pressure and porosity. Furthermore, the strong swelling and shrinkage behaviours of clayey material are also considered in the present model. The model has been applied to simulate a laboratory heating experiment on claystone. The numerical model gives a satisfactory representation of the observed material behaviour in the laboratory experiment. The comparison of the calculated results with the laboratory findings verifies that the simulation with the present numerical model could provide a deeper understanding of the observed effects.

  2. Evaluation of Vehicle-Based Crash Severity Metrics.

    Science.gov (United States)

    Tsoi, Ada H; Gabler, Hampton C

    2015-01-01

    Vehicle change in velocity (delta-v) is a widely used crash severity metric used to estimate occupant injury risk. Despite its widespread use, delta-v has several limitations. Of most concern, delta-v is a vehicle-based metric which does not consider the crash pulse or the performance of occupant restraints, e.g. seatbelts and airbags. Such criticisms have prompted the search for alternative impact severity metrics based upon vehicle kinematics. The purpose of this study was to assess the ability of the occupant impact velocity (OIV), acceleration severity index (ASI), vehicle pulse index (VPI), and maximum delta-v (delta-v) to predict serious injury in real world crashes. The study was based on the analysis of event data recorders (EDRs) downloaded from the National Automotive Sampling System / Crashworthiness Data System (NASS-CDS) 2000-2013 cases. All vehicles in the sample were GM passenger cars and light trucks involved in a frontal collision. Rollover crashes were excluded. Vehicles were restricted to single-event crashes that caused an airbag deployment. All EDR data were checked for a successful, completed recording of the event and that the crash pulse was complete. The maximum abbreviated injury scale (MAIS) was used to describe occupant injury outcome. Drivers were categorized into either non-seriously injured group (MAIS2-) or seriously injured group (MAIS3+), based on the severity of any injuries to the thorax, abdomen, and spine. ASI and OIV were calculated according to the Manual for Assessing Safety Hardware. VPI was calculated according to ISO/TR 12353-3, with vehicle-specific parameters determined from U.S. New Car Assessment Program crash tests. Using binary logistic regression, the cumulative probability of injury risk was determined for each metric and assessed for statistical significance, goodness-of-fit, and prediction accuracy. The dataset included 102,744 vehicles. A Wald chi-square test showed each vehicle-based crash severity metric

  3. Collection and valuation of numerical models with the aim to investigate the impact of aircraft emissions

    International Nuclear Information System (INIS)

    Dameris, M.

    1993-01-01

    Numerical models which are used to simulate the dynamics and chemistry of the Earth atmosphere are an important expedient to improve the knowledge of atmospheric processes. With such models it is possible to investigate single effects separately and to estimate their meaning for the whole system. It is possible to make sensitivity studies as well as calculations of different scenarios. This paper aims to describe different models which are available in the present time and which can be used for investigations dealing with the impact of aircraft emission on the Earth climate. Actual deficits of the modelling of atmospheric processes are discussed and the subsequent conclusions are presented. (orig.) 49 refs [de

  4. Numerical simulation and impact assessment of a groundwater pollution based on MODFLOW

    International Nuclear Information System (INIS)

    Liu Dongxu; Si Gaohua; Zheng Junfang; Yu Jing; Liu Yong; Chen Jianjie; Ma Jinzhu

    2013-01-01

    Based on MODFLOW, SRTM3 DEM data and GIS tool, a saturated-zone groundwater flow and radionuclide transport numerical model in a research area had been developed to evaluate the migration trend and environmental impact. The results showed that 3 H transporting with the groundwater had a fast velocity and a pulse concentration which can not reduce to acceptable level within short times. that may cause groundwater pollution in downstream region. However, 90 Sr was transported slowly with the groundwater, and may only cause a pollution area of about 200 m around the source. (authors)

  5. Analytical and Numerical Study of Foam-Filled Corrugated Core Sandwich Panels under Low Velocity Impact

    Directory of Open Access Journals (Sweden)

    Mohammad Nouri Damghani

    2016-05-01

    Full Text Available Analytical and finite element simulations are used to predict the effect of core density on the energy absorption of composite sandwich panels under low-velocity impact. The composite sandwich panel contains two facesheets and a foam-filled corrugated core. Analytical model is defined as a two degree-of-freedom system based on equivalent mass, spring, and dashpot to predict the local and global deformation response of a simply supported panel. The results signify a good agreement between analytical and numerical predictions.

  6. Numerical Evaluation of Dynamic Response for Flexible Composite Structures under Slamming Impact for Naval Applications

    Science.gov (United States)

    Hassoon, O. H.; Tarfaoui, M.; El Moumen, A.; Benyahia, H.; Nachtane, M.

    2018-06-01

    The deformable composite structures subjected to water-entry impact can be caused a phenomenon called hydroelastic effect, which can modified the fluid flow and estimated hydrodynamic loads comparing with rigid body. This is considered very important for ship design engineers to predict the global and the local hydrodynamic loads. This paper presents a numerical model to simulate the slamming water impact of flexible composite panels using an explicit finite element method. In order to better describe the hydroelastic influence and mechanical properties, composite materials panels with different stiffness and under different impact velocities with deadrise angle of 100 have been studied. In the other hand, the inertia effect was observed in the early stage of the impact that relative to the loading rate. Simulation results have been indicated that the lower stiffness panel has a higher hydroelastic effect and becomes more important when decreasing of the deadrise angle and increasing the impact velocity. Finally, the simulation results were compared with the experimental data and the analytical approaches of the rigid body to describe the behavior of the hydroelastic influence.

  7. Accident analysis for aircraft crash into hazardous facilities: DOE standard

    International Nuclear Information System (INIS)

    1996-10-01

    This standard provides the user with sufficient information to evaluate and assess the significance of aircraft crash risk on facility safety without expending excessive effort where it is not required. It establishes an approach for performing a conservative analysis of the risk posed by a release of hazardous radioactive or chemical material resulting from an aircraft crash into a facility containing significant quantities of such material. This can establish whether a facility has a significant potential for an aircraft impact and whether this has the potential for producing significant offsite or onsite consequences. General implementation guidance, screening and evaluation guidelines, and methodologies for the evaluations are included

  8. Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core

    Directory of Open Access Journals (Sweden)

    Soroush Sadeghnejad

    2016-03-01

    Full Text Available A numerical and experimental low-velocity impact behavior of sandwich plates have been presently studied with regard to the compressibility and viscoelasticity features of their cores. Face sheets were assumed to be anisotropic composites or isotropic aluminum materials and a viscoelastic behavior has been considered for core. The boundary conditions are assumed to be simply supported or rigid. Abaqus, as FEM software, and its python script programming feature, have been used to model the specimens. To model hyper-viscoelastic nonlinear behavior of the core, Ogden hyper-foam elasticity and Prony series approach are manipulated. To solve the numerical problem, dynamic explicit solver option with sufficient solving amplitude has been used. Prony series have been used to model the core time-dependent behavior. In conjunction with a simple indentation experiment, FEM used to formulate a novel method for finding the Prony series coefficients. By performing some low-velocity impact experiments, the impact force and displacement of the composite sandwich plates have been investigated. The results indicate that increasing the structural damping increases the contact time and missing energy and decreases the stored energy of the system. The structures with composite face sheets have a minimum ratio of upper face sheet displacement to lower face sheet displacement in comparison to those with the isotropic face sheets. Impact behavior of isotropic face sheet specimens are more flattened than that of the composite face sheets. In addition, the specific energy stored in the sandwich plates with composite face sheets, on different supports, is greater than that stored in the aluminum face sheets.

  9. Statewide analysis of bicycle crashes : [project summary].

    Science.gov (United States)

    2017-06-01

    An extensive literature review was conducted to locate existing studies in four areas: (1) risk factors that affect the frequency and severity of bicycle crashes; (2) bicycle crash causes, patterns, and contributing factors; (3) network screening met...

  10. Alcohol-crash problem in Canada, 2007

    Science.gov (United States)

    2010-03-01

    This report examines: data on alcohol in fatally injured drivers and pedestrians; the number and : percent of people who died in alcohol-related crashes; and alcohol involvement in those crashes : in which someone was seriously injured but not killed...

  11. Alcohol-crash problem in Canada, 2006

    Science.gov (United States)

    2009-01-01

    This report examines: data on alcohol in fatally injured drivers and pedestrians; the number and : percent of people who died in alcohol-related crashes; and alcohol involvement in those crashes : in which someone was seriously injured but not killed...

  12. Alcohol-crash problem in Canada, 2008

    Science.gov (United States)

    2010-12-01

    This report examines: data on alcohol in fatally injured drivers and pedestrians; the number and : percent of people who died in alcohol-related crashes; and alcohol involvement in those crashes : in which someone was seriously injured but not killed...

  13. National Motor Vehicle Crash Causation Survey (NMVCCS)

    Data.gov (United States)

    Department of Transportation — The National Motor Vehicle Crash Causation Survey (NMVVCS) was a nationwide survey of crashes involving light passenger vehicles, with a focus on the factors related...

  14. Teen driver crashes : a report to Congress

    Science.gov (United States)

    2008-07-01

    This report summarizes what is known about the teen driver crash problem and reviews the research on the major contributing factors to the high teen crash rate. Dispositional factors, such as immaturity, inexperience, faulty judgment, and a higher pr...

  15. 2004 road traffic crashes in Queensland

    Science.gov (United States)

    2009-05-01

    This report presents an overview of reported road traffic crashes in Queensland during : 2004 in the context of the previous five years based on data contained in the Queensland : Road Crash Information System maintained by the Department of Transpor...

  16. Experiments and Numerical Simulations of Dike Erosion due to a Wave Impact

    Directory of Open Access Journals (Sweden)

    Stefania Evangelista

    2015-10-01

    Full Text Available Dike erosion is a crucial issue in coastal and fluvial flood risk management. These defense structures appear vulnerable to extreme hydrological events, whose potential occurrence risk seems to be recently increased due to climate change. Their design and reinforcement is, however, a complex task, and although numerical models are very powerful nowadays, real processes cannot be accurately predicted; therefore, physical models constitute a useful tool to investigate different features under controlled conditions. This paper presents some laboratory experimental results of erosion of a sand dike produced by the impact of a dam break wave. Experiments have been conducted in the Water Engineering Laboratory at the University of Cassino and Southern Lazio, Italy, in a rectangular channel: here, the sudden opening of a gate forming the reservoir generates the wave impacting the dike, made in turn of two different, almost uniform sands. The physical evidence proves that the erosion process is strongly unsteady and significantly different from a gradual overtopping and highlights the importance of apparent cohesion for the fine sand dike. The experimental results have also been compared against the ones obtained through the numerical integration of a two-phase model, which shows the reasonable predictive capability of the temporal free surface and dike profile evolution.

  17. Numerical simulation of impact bend tests on araldite B and steel specimens

    International Nuclear Information System (INIS)

    Stoeckl, H.; Boehme, W.

    1983-09-01

    As a preliminary stage in the numerical simulation of impact bend tests on elastic-plastic sample materials some simpler experiments were calculated for this report, some of which occured without crack propagation, others with linear elastic crack propagation. These calculations were performed with an own program based on the method of finite differences and also with the finite element program ADINA. In the numerical models plane stress was assumed. Crack propagation was governed by a relation between crack velocity and stress intensity factor. As load input the measured hammer load was used in some cases, mass and initial velocity of the hammer in others. The sample looses contact to the anvils and to the hammer for some time, which had to be considered in model building. The stiffening of the model in the contact region caused by the discretization had to be compensated by springs inserted between the sample and the anvils. The simulation reproduces the experimentally observed behaviour of the sample quite well. Furthermore, additional information can be extracted from the experiment, e.g. concerning the partition of the impact energy. (orig.) [de

  18. The distracted mind on the wheel: Overall propensity to mind wandering is associated with road crash responsibility

    OpenAIRE

    Gil-Jardin?, C?dric; N?e, M?lanie; Lagarde, Emmanuel; Schooler, Jonathan; Contrand, Benjamin; Orriols, Ludivine; Galera, C?dric

    2017-01-01

    The role of distractions on attentional lapses that place road users in higher risk of crash remains poorly understood. We aimed to assess the respective impact of (i) mind wandering trait (propensity to mind wander in the everyday life as measured with a set of 4 questions on the proportion of time spent mind wandering in 4 different situations) and (ii) mind wandering state (disturbing thoughts just before the crash) on road crash risk using a comparison between responsible and non-responsi...

  19. Numerical study of the impact of a drop containing a bubble

    Science.gov (United States)

    Wei, Yu; Thoraval, Marie-Jean

    2017-11-01

    The impact of a drop has many applications from inkjet printing to the spreading of crops diseases. This fundamental phenomenon has therefore attracted a lot of interest from different fields. However, they have mostly focused on the simplest case of a drop containing a single fluid. In inkjet printing and in the deposition process of thermal barrier coatings, some bubbles can be present in the drop when it impacts on the solid surface. The presence of the bubble can produce some additional splashing, and affect the quality of the deposited material. Only a few studies have looked at this problem, and many questions still need to be investigated. Generally, there are three possibilities when a drop containing a bubble impacts onto a solid surface, namely the bubble stays in drop, the bubble bursts and a counter jet forms. We have performed axisymmetric numerical simulations with the open source code Gerris to study this vertical jet. We have systematically varied several parameters, including the impact velocity, the bubble size, the vertical position of the bubble, and the liquid properties. We were thus able to characterize under which condition the bubble leads to splashing and the velocity of the produced jet.

  20. Numerical Study of High-Speed Droplet Impact on Surfaces and its Physical Cleaning Effects

    Science.gov (United States)

    Kondo, Tomoki; Ando, Keita

    2015-11-01

    Spurred by the demand for cleaning techniques of low environmental impact, one favors physical cleaning that does not rely on any chemicals. One of the promising candidates is based on water jets that often involve fission into droplet fragments and collide with target surfaces to which contaminant particles (often micron-sized or even smaller) stick. Hydrodynamic force (e.g., shearing and lifting) arising from the droplet impact will play a role to remove the particles, but its detailed mechanism is still unknown. To explore the role of high-speed droplet impact in physical cleaning, we solve compressible Navier-Stokes equations with a finite volume method that is designed to capture both shocks and material interfaces in accurate and robust manners. Water hammer and shear flow accompanied by high-speed droplet impact at a rigid wall is simulated to evaluate lifting force and rotating torque, which are relevant to the application of particle removal. For the simulation, we use the numerical code recently developed by Computational Flow Group lead by Tim Colonius at Caltech. The first author thanks Jomela Meng for her help in handling the code during his stay at Caltech.

  1. Conscientious personality and young drivers’ crash risk

    OpenAIRE

    Ehsani, Johnathon P.; Li, Kaigang; Simons-Morton, Bruce; Tree-McGrath, Cheyenne Fox; Perlus, Jessamyn; O’Brien, Fearghal; Klauer, Sheila G.

    2015-01-01

    Personality characteristics are associated with many risk behaviors. However, the relationship between personality traits, risky driving behavior, and crash risk is poorly understood. The purpose of this study was to examine the association between personality, risky driving behavior, and crashes and near-crashes, using naturalistic driving research methods. Method: Participants' driving exposure, kinematic risky driving (KRD), high-risk secondary task engagement, and the frequency of crashes...

  2. Building concepts against airplane crash

    International Nuclear Information System (INIS)

    Henkel, F.O.; Woelfel, H.

    1984-01-01

    In Germany safety related buildings of nuclear facilities as well as their equipment are to be designed against airplane crash. While the safety of the structure itself can always be guaranteed by structural means, the induced vibrations may cause severe problems for the equipment. Considerable effort was expended in recent years to comprehend the load case airplane crash in a more exact manner and to evaluate reasonable floor response spectra. Besides this analytical effort, investigations are cited to minimize the induced vibrations by new structural concepts. The present paper gives a survey concerning the development of structural concepts, culminating in the double shell structures that are state of the art today. Then the idea of spring supports, as it is known for the aseismic foundation of buildings, is further developed to a new spring concept which reduces the induced vibrations in an optimum way in the load case airplane crash and which additionally isolates earthquake vibrations. (orig.)

  3. Crash simulation: an immersive learning model.

    Science.gov (United States)

    Wenham, John; Bennett, Paul; Gleeson, Wendy

    2017-12-26

    Far West New South Wales Local Emergency Management Committee runs an annual crash simulation exercise to assess the operational readiness of all local emergency services to coordinate and manage a multi-casualty exercise. Since 2009, the Broken Hill University Department of Rural Health (BHUDRH) has collaborated with the committee, enabling the inclusion of health students in this exercise. It is an immersive interprofessional learning experience that evaluates teamwork, communication and safe effective clinical trauma management outside the hospital setting. After 7 years of modifying and developing the exercise, we set out to evaluate its impact on the students' learning, and sought ethics approval from the University of Sydney for this study. At the start of this year's crash simulation, students were given information sheets and consent forms with regards to the research. Once formal debriefing had finished, the researchers conducted a semi-structured focus-group interview with the health students to gain insight into their experience and their perceived value of the training. Students also completed short-answer questionnaires, and the anonymised responses were analysed. Crash simulation … evaluates teamwork, communication and safe effective clinical trauma management IMPLICATIONS: Participants identified that this multidisciplinary learning opportunity in a pre-hospital mass casualty situation was of value to them. It has taken them outside of their usually protected hospital or primary care setting and tested their critical thinking and communication skills. We recommend this learning concept to other educational institutions. Further research will assess the learning value of the simulated event to the other agencies involved. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

  4. IRIS-2012 OECD/NEA/CSNI benchmark: Numerical simulations of structural impact

    International Nuclear Information System (INIS)

    Orbovic, Nebojsa; Tarallo, Francois; Rambach, Jean-Mathieu; Sagals, Genadijs; Blahoianu, Andrei

    2015-01-01

    A benchmark of numerical simulations related to the missile impact on reinforced concrete (RC) slabs has been launched in the frame of OECD/NEA/CSNI research program “Improving Robustness Assessment Methodologies for Structures Impacted by Missiles”, under the acronym IRIS. The goal of the research program is to simulate RC structural, flexural and punching, behavior under deformable and rigid missile impact. The first phase called IRIS-2010 was a blind prediction of the tests performed at VTT facility in Espoo, Finland. The two simulations were performed related to two series of tests: (1) two tests on the impact of a deformable missile exhibiting damage mainly by flexural (so-called “flexural tests”) or global response and (2) three tests on the impact of a rigid missile exhibiting damage mainly by punching response (so-called “punching tests”) or local response. The simulation results showed significant scatter (coefficient of variation up to 132%) for both flexural and punching cases. The IRIS-2012 is the second, post-test, phase of the benchmark with the goal to improve simulations and reduce the scatter of the results. Based on the IRIS-2010 recommendations and to better calibrate concrete constitutive models, a series of tri-axial tests as well as Brazilian tests were performed as a part of the IRIS-2012 benchmark. 25 teams from 11 countries took part in this exercise. Majority of participants were part of the IRIS-2010 benchmark. Participants showed significant improvement in reducing epistemic uncertainties in impact simulations. Several teams presented both finite element (FE) and simplified analysis as per recommendations of the IRIS-2010. The improvements were at the level of simulation results but also at the level of understanding of impact phenomena and its modeling. Due to the complexity of the physical phenomena and its simulation (high geometric and material non-linear behavior) and inherent epistemic and aleatory uncertainties, the

  5. IRIS-2012 OECD/NEA/CSNI benchmark: Numerical simulations of structural impact

    Energy Technology Data Exchange (ETDEWEB)

    Orbovic, Nebojsa, E-mail: nebojsa.orbovic@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, ON (Canada); Tarallo, Francois [IRSN, Fontenay aux Roses (France); Rambach, Jean-Mathieu [Géodynamique et Structures, Bagneux (France); Sagals, Genadijs; Blahoianu, Andrei [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

    2015-12-15

    A benchmark of numerical simulations related to the missile impact on reinforced concrete (RC) slabs has been launched in the frame of OECD/NEA/CSNI research program “Improving Robustness Assessment Methodologies for Structures Impacted by Missiles”, under the acronym IRIS. The goal of the research program is to simulate RC structural, flexural and punching, behavior under deformable and rigid missile impact. The first phase called IRIS-2010 was a blind prediction of the tests performed at VTT facility in Espoo, Finland. The two simulations were performed related to two series of tests: (1) two tests on the impact of a deformable missile exhibiting damage mainly by flexural (so-called “flexural tests”) or global response and (2) three tests on the impact of a rigid missile exhibiting damage mainly by punching response (so-called “punching tests”) or local response. The simulation results showed significant scatter (coefficient of variation up to 132%) for both flexural and punching cases. The IRIS-2012 is the second, post-test, phase of the benchmark with the goal to improve simulations and reduce the scatter of the results. Based on the IRIS-2010 recommendations and to better calibrate concrete constitutive models, a series of tri-axial tests as well as Brazilian tests were performed as a part of the IRIS-2012 benchmark. 25 teams from 11 countries took part in this exercise. Majority of participants were part of the IRIS-2010 benchmark. Participants showed significant improvement in reducing epistemic uncertainties in impact simulations. Several teams presented both finite element (FE) and simplified analysis as per recommendations of the IRIS-2010. The improvements were at the level of simulation results but also at the level of understanding of impact phenomena and its modeling. Due to the complexity of the physical phenomena and its simulation (high geometric and material non-linear behavior) and inherent epistemic and aleatory uncertainties, the

  6. Numerical Study of Erosion, Heating, and Acceleration of the Magnetic Cloud as Impacted by Fast Shock

    International Nuclear Information System (INIS)

    Mao, Shoudi; He, Jiansen; Yang, Liping; Wang, Linghua; Zhang, Lei

    2017-01-01

    The impact of an overtaking fast shock on a magnetic cloud (MC) is a pivotal process in CME–CME (CME: coronal mass ejection) interactions and CME–SIR (SIR: stream interaction region) interactions. MC with a strong and rotating magnetic field is usually deemed a crucial part of CMEs. To study the impact of a fast shock on an MC, we perform a 2.5 dimensional numerical magnetohydrodynamic simulation. Two cases are run in this study: without and with impact by fast shock. In the former case, the MC expands gradually from its initial state and drives a relatively slow magnetic reconnection with the ambient magnetic field. Analyses of forces near the core of the MC as a whole body indicates that the solar gravity is quite small compared to the Lorentz force and the pressure gradient force. In the second run, a fast shock propagates, relative to the background plasma, at a speed twice that of the perpendicular fast magnetosonic speed, catches up with and takes over the MC. Due to the penetration of the fast shock, the MC is highly compressed and heated, with the temperature growth rate enhanced by a factor of about 10 and the velocity increased to about half of the shock speed. The magnetic reconnection with ambient magnetic field is also sped up by a factor of two to four in reconnection rate as a result of the enhanced density of the current sheet, which is squeezed by the forward motion of the shocked MC.

  7. Numerical Study of Erosion, Heating, and Acceleration of the Magnetic Cloud as Impacted by Fast Shock

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Shoudi; He, Jiansen; Yang, Liping; Wang, Linghua [School of Earth and Space Sciences, Peking University No. 5 Yiheyuan Road, Haidian District Beijing, 100871 (China); Zhang, Lei, E-mail: jshept@gmail.com [SIGMA Weather Group, State Key Laboratory of Space Weather, Center for Space Science and Applied Research, Chinese Academy of Sciences No.1 Nanertiao, Zhongguancun, Haidian district Beijing, 100190 (China)

    2017-06-20

    The impact of an overtaking fast shock on a magnetic cloud (MC) is a pivotal process in CME–CME (CME: coronal mass ejection) interactions and CME–SIR (SIR: stream interaction region) interactions. MC with a strong and rotating magnetic field is usually deemed a crucial part of CMEs. To study the impact of a fast shock on an MC, we perform a 2.5 dimensional numerical magnetohydrodynamic simulation. Two cases are run in this study: without and with impact by fast shock. In the former case, the MC expands gradually from its initial state and drives a relatively slow magnetic reconnection with the ambient magnetic field. Analyses of forces near the core of the MC as a whole body indicates that the solar gravity is quite small compared to the Lorentz force and the pressure gradient force. In the second run, a fast shock propagates, relative to the background plasma, at a speed twice that of the perpendicular fast magnetosonic speed, catches up with and takes over the MC. Due to the penetration of the fast shock, the MC is highly compressed and heated, with the temperature growth rate enhanced by a factor of about 10 and the velocity increased to about half of the shock speed. The magnetic reconnection with ambient magnetic field is also sped up by a factor of two to four in reconnection rate as a result of the enhanced density of the current sheet, which is squeezed by the forward motion of the shocked MC.

  8. Numerical Material Model for Composite Laminates in High-Velocity Impact Simulation

    Directory of Open Access Journals (Sweden)

    Tao Liu

    Full Text Available Abstract A numerical material model for composite laminate, was developed and integrated into the nonlinear dynamic explicit finite element programs as a material user subroutine. This model coupling nonlinear state of equation (EOS, was a macro-mechanics model, which was used to simulate the major mechanical behaviors of composite laminate under high-velocity impact conditions. The basic theoretical framework of the developed material model was introduced. An inverse flyer plate simulation was conducted, which demonstrated the advantage of the developed model in characterizing the nonlinear shock response. The developed model and its implementation were validated through a classic ballistic impact issue, i.e. projectile impacting on Kevlar29/Phenolic laminate. The failure modes and ballistic limit velocity were analyzed, and a good agreement was achieved when comparing with the analytical and experimental results. The computational capacity of this model, for Kevlar/Epoxy laminates with different architectures, i.e. plain-woven and cross-plied laminates, was further evaluated and the residual velocity curves and damage cone were accurately predicted.

  9. From “Crash!” to Crash: Adapting the Adaptation

    Directory of Open Access Journals (Sweden)

    Ljubica Matek

    2017-12-01

    Full Text Available The paper focuses on J.G. Ballard’s various adaptations of his own material related to the issue of the sexual and sensual nature of an automobile crash, and suggests that adaptation is one of the key methods in art and literature which can be used as a means of contemplating and developing various aesthetic and political ideas. Ballard’s short story “Crash!” was first published in the ICA’s (Institute of Contemporary Arts Eventsheet in February 1969, and later became a chapter of his experimental novel The Atrocity Exhibition (1970. At the same time, Ballard adapts the idea into the “Crashed Cars” exhibition (1970 in London. The short story was then adapted into a short film, Crash!, directed by Harley Cokeliss (1971 and starring Ballard himself, to be finally adapted into the novel Crash (1973. Ballard’s adaptation of his initial ideas across literary forms and media testifies to the importance of adaptation as a process and method of creating art. Thus, rather than suggesting that adaptations merely “breathe life” into the written word, the paper points to the conclusion that the form and content are mutually influential and that, in this case, the novel itself is an adaptation, rather than a hypotext (which it becomes in 1996 to David Cronenberg as he adapts it to film. The complexity of the relationship between the source text and its many adaptations has already contributed to the deconstruction, in Derrida’s terms, of the hierarchy (opposition between the original and the copy. Rather, Ballard’s crossmedial and transmedial adaptations of his own ideas show how, as Ray would suggest, an adaptation cites the source and grafts it into a new context, giving it a new function, both aesthetic and political.

  10. Finite pressure effects on the tokamak sawtooth crash

    International Nuclear Information System (INIS)

    Nishimura, Yasutaro

    1998-07-01

    The sawtooth crash is a hazardous, disruptive phenomenon that is observed in tokamaks whenever the safety factor at the magnetic axis is below unity. Recently, Tokamak Test Fusion Reactor (TFTR) experimental data has revealed interesting features of the dynamical pressure evolution during the crash phase. Motivated by the experimental results, this dissertation focuses on theoretical modeling of the finite pressure effects on the nonlinear stage of the sawtooth crash. The crash phase has been studied numerically employed a toroidal magnetohydrodynamic (MHD) initial value code deduced from the FAR code. For the first time, by starting from a concentric equilibrium, it has been shown that the evolution through an m/n = 1/1 magnetic island induces secondary high-n ballooning instabilities. The magnetic island evolution gives rise to convection of the pressure inside the inversion radius and builds up a steep pressure gradient across the island separatrix, or current sheet, and thereby triggers ballooning instabilities below the threshold for the axisymmetric equilibrium. Due to the onset of secondary ballooning modes, concomitant fine scale vortices and magnetic stochasticity are generated. These effects produce strong flows across the current sheet, and thereby significant modify the m = 1 driven magnetic reconnection process. The resultant interaction of the high-n ballooning modes with the magnetic reconnection process is discussed

  11. An experimental and numerical study of the atmospheric stability impact on wind turbine wakes

    DEFF Research Database (Denmark)

    Machefaux, Ewan; Larsen, Gunner Chr.; Koblitz, Tilman

    2016-01-01

    campus test site. Wake measurements are averaged within a mean wind speed bin of 1 m s1 and classified according to atmospheric stability using three different metrics: the Obukhov length, the Bulk–Richardson number and the Froude number. Three test cases are subsequently defined covering various...... atmospheric conditions. Simulations are carried out using large eddy simulation and actuator disk rotor modeling. The turbulence properties of the incoming wind are adapted to the thermal stratification using a newly developed spectral tensor model that includes buoyancy effects. Discrepancies are discussed......In this paper, the impact of atmospheric stability on a wind turbine wake is studied experimentally and numerically. The experimental approach is based on full-scale (nacelle based) pulsed lidar measurements of the wake flow field of a stall-regulated 500 kW turbine at the DTU Wind Energy, Risø...

  12. Numerical Simulations of the Impact and Spreading of a Particulate Drop on a Solid Substrate

    Directory of Open Access Journals (Sweden)

    Hyun Jun Jeong

    2012-01-01

    Full Text Available We present two-dimensional numerical simulations of the impact and spreading of a droplet containing a number of small particles on a flat solid surface, just after hitting the solid surface, to understand particle effects on spreading dynamics of a particle-laden droplet for the application to the industrial inkjet printing process. The Navier-Stokes equation is solved by a finite-element-based computational scheme that employs the level-set method for the accurate interface description between the drop fluid and air and a fictitious domain method for suspended particles to account for full hydrodynamic interaction. Focusing on the particle effect on droplet spreading and recoil behaviors, we report that suspended particles suppress the droplet oscillation and deformation, by investigating the drop deformations for various Reynolds numbers. This suppressed oscillatory behavior of the particulate droplet has been interpreted with the enhanced energy dissipation due to the presence of particles.

  13. Numerical Simulation of Ionospheric Disturbances Generated by the Chelyabinsk and Tunguska Space Body Impacts

    Science.gov (United States)

    Shuvalov, V. V.; Khazins, V. M.

    2018-03-01

    Numerical simulation of atmospheric disturbances during the first hours after the Chelyabinsk and Tunguska space body impacts has been carried out. The results of detailed calculations, including the stages of destruction, evaporation and deceleration of the cosmic body, the generation of atmospheric disturbances and their propagation over distances of thousands of kilometers, have been compared with the results of spherical explosions with energy equal to the kinetic energy of meteoroids. It has been shown that in the case of the Chelyabinsk meteorite, an explosive analogy provides acceptable dimensions of the perturbed region and the perturbation amplitude. With a more powerful Tunguska fall, the resulting atmospheric flow is very different from the explosive one; an atmospheric plume emerges that releases matter from the meteoric trace to an altitude of the order of a thousand kilometers.

  14. A NOVEL NUMERICAL MODEL APPROACH FOR EXAMINING SHIP BERTHING IMPACT ON FLOATING PIERS

    Directory of Open Access Journals (Sweden)

    AMIN CHEGENIZADEH

    2015-08-01

    Full Text Available This paper presents the results of an investigation into the impact of ship berthing upon floating piers using highly advanced numerical software Abaqus. The ship and floating piers were modeled as solid bodies. For the first time, the effect of soil on the total energy absorption of the system was considered using both elastic and elastic-perfectly plastic soil models. First the results for the elastic soil model were compared to and verified by the existing literature using a spring soil model.Then a continuum soil model was utilized instead of a spring soil model, with the results showing 27% higher energy absorption compared to the spring model. The investigation also considered a model with soil as an elastic-perfectly plastic material, being more aligned with the soil material’s real behavior. With this model the results produced 1% more energy absorption as the soil did not reach plastic failure.

  15. Experimental and Numerical Investigation of Metal Type and Thickness Effects on the Impact Resistance of Fiber Metal Laminates

    NARCIS (Netherlands)

    Sadighi, M.; Pärnänen, T.; Alderliesten, R.C.; Sayeaftabi, M.; Benedictus, R.

    2012-01-01

    The impact response of fiber metal laminates (FMLs), has been investigated with experiments and numerical simulations, which is reported in this article. Low-velocity impacts were carried out to study the effects of metal type and thickness within FMLs. Glare5-3/2 laminates with two aluminum layer

  16. Crash simulations for interior design

    NARCIS (Netherlands)

    Poeze, E.; Slaats, P.M.A.

    1996-01-01

    With the increasing number of compact cars, safety aspects becomes increasingly important for interior designs. The smaller dimensions of these cars do not only decrease the car mass, but also the energy absorption length, resulting in a more severe crash pulse. As a consequence, the inertia loading

  17. 2008 Michigan traffic crash facts

    Science.gov (United States)

    2009-03-18

    In keeping with recent trends, traffic fatalities in 2008 were down to 980, a 9.6 : percent decrease from last year. The total number of persons injured also declined : 7.5 percent to 74,568 and total crashes dropped 2.5 percent to 316,057. Most : no...

  18. 2009 Michigan traffic crash facts

    Science.gov (United States)

    2010-01-01

    In keeping with recent trends, traffic fatalities in 2009 were down to 871, a 11.1 : percent decrease from last year. The total number of persons injured also declined : 4.9 percent to 70,931 and total crashes dropped 7.9 percent to 290,978. Most : n...

  19. Suicide plane crash against nuclear power plants

    International Nuclear Information System (INIS)

    Richard, A.

    2002-01-01

    Cea (French atomic energy commission) and EDF (Electricity of France) are reassessing their safety standards concerning suicide plane attacks against nuclear facilities. The general idea is to study the non-linear behaviour of reinforced concrete in case of mechanical impact. American studies carried out in 1988 show that a F-14 phantom crashing into a 3,6 meter thick wall at a speed of 774 km/h penetrates only the first 5 cm of the wall. More recent studies performed in Germany and based on computerized simulations show that the reactor containment can sustain impacts from a F15 plane or even from a 747-Boeing but contiguous buildings like the one which houses spent fuels might be more easily damaged because of their metal roofing. (A.C.)

  20. A comprehensive analysis of factors influencing the injury severity of large-truck crashes.

    Science.gov (United States)

    Zhu, Xiaoyu; Srinivasan, Sivaramakrishnan

    2011-01-01

    Given the importance of trucking to the economic well being of a country and the safety concerns posed by the trucks, a study of large-truck crashes is critical. This paper contributes by undertaking an extensive analysis of the empirical factors affecting injury severity of large-truck crashes. Data from a recent, nationally representative sample of large-truck crashes are examined to determine the factors affecting the overall injury severity of these crashes. The explanatory factors include the characteristics of the crash, vehicle(s), and the driver(s). The injury severity was modeled using two measures. Several similarities and some differences were observed across the two models which underscore the need for improved accuracy in the assessment of injury severity of crashes. The estimated models capture the marginal effects of a variety of explanatory factors simultaneously. In particular, the models indicate the impacts of several driver behavior variables on the severity of the crashes, after controlling for a variety of other factors. For example, driver distraction (truck drivers), alcohol use (car drivers), and emotional factors (car drivers) are found to be associated with higher severity crashes. A further interesting finding is the strong statistical significance of several dummy variables that indicate missing data - these reflect how the nature of the crash itself could affect the completeness of the data. Future efforts should seek to collect such data more comprehensively so that the true effects of these aspects on the crash severity can be determined. Copyright © 2010 Elsevier Ltd. All rights reserved.

  1. Naturalistic Assessment of Novice Teenage Crash Experience

    Science.gov (United States)

    Lee, Suzanne E.; Simons-Morton, Bruce G.; Klauer, Sheila E.; Ouimet, Marie Claude; Dingus, Thomas A.

    2011-01-01

    Background Crash risk is highest during the first months after licensure. Current knowledge about teenagers’ driving exposure and the factors increasing their crash risk is based on self-reported data and crash database analyses. While these research tools are useful, new developments in naturalistic technologies have allowed researchers to examine newly-licensed teenagers’ exposure and crash risk factors in greater detail. The Naturalistic Teenage Driving Study (NTDS) described in this paper is the first study to follow a group of newly-licensed teenagers continuously for 18 months after licensure. The goals of this paper are to compare the crash and near-crash experience of drivers in the NTDS to national trends, to describe the methods and lessons learned in the NTDS, and to provide initial data on driving exposure for these drivers. Methods A data acquisition system was installed in the vehicles of 42 newly-licensed teenage drivers 16 years of age during their first 18 months of independent driving. It consisted of cameras, sensors (accelerometers, GPS, yaw, front radar, lane position, and various sensors obtained via the vehicle network), and a computer with removable hard drive. Data on the driving of participating parents was also collected when they drove the instrumented vehicle. Findings The primary findings after 18 months included the following: (1) crash and near-crash rates among teenage participants were significantly higher during the first six months of the study than the final 12 months, mirroring the national trends; (2) crash and near-crash rates were significantly higher for teenage than adult (parent) participants, also reflecting national trends; (3) teenaged driving exposure averaged between 507-710 kilometers (315-441 miles) per month over the study period, but varied substantially between participants with standard errors representing 8-14 percent of the mean; and (4) crash and near-crash types were very similar for male and female

  2. Effect of Accounting for Crash Severity on the Relationship between Mass Reduction and Crash Frequency and Risk per Crash

    Energy Technology Data Exchange (ETDEWEB)

    Wenzel, Tom P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Building Technology and Urban Systems Division. Energy Technologies Area

    2016-05-20

    Previous analyses have indicated that mass reduction is associated with an increase in crash frequency (crashes per VMT), but a decrease in fatality or casualty risk once a crash has occurred, across all types of light-duty vehicles. These results are counter-intuitive: one would expect that lighter, and perhaps smaller, vehicles have better handling and shorter braking distances, and thus should be able to avoid crashes that heavier vehicles cannot. And one would expect that heavier vehicles would have lower risk once a crash has occurred than lighter vehicles. However, these trends occur under several alternative regression model specifications. This report tests whether these results continue to hold after accounting for crash severity, by excluding crashes that result in relatively minor damage to the vehicle(s) involved in the crash. Excluding non-severe crashes from the initial LBNL Phase 2 and simultaneous two-stage regression models for the most part has little effect on the unexpected relationships observed in the baseline regression models. This finding suggests that other subtle differences in vehicles and/or their drivers, or perhaps biases in the data reported in state crash databases, are causing the unexpected results from the regression models.

  3. Impact of a Cosmic Body into Earth's Ocean and the Generation of Large Tsunami Waves: Insight from Numerical Modeling

    Science.gov (United States)

    Wünnemann, K.; Collins, G. S.; Weiss, R.

    2010-12-01

    The strike of a cosmic body into a marine environment differs in several respects from impact on land. Oceans cover approximately 70% of the Earth's surface, implying not only that oceanic impact is a very likely scenario for future impacts but also that most impacts in Earth's history must have happened in marine environments. Therefore, the study of oceanic impact is imperative in two respects: (1) to quantify the hazard posed by future oceanic impacts, including the potential threat of large impact-generated tsunami-like waves, and (2) to reconstruct Earth's impact record by accounting for the large number of potentially undiscovered crater structures in the ocean crust. Reconstruction of the impact record is of crucial importance both for assessing the frequency of collision events in the past and for better predicting the probability of future impact. We summarize the advances in the study of oceanic impact over the last decades and focus in particular on how numerical models have improved our understanding of cratering in the oceanic environment and the generation of waves by impact. We focus on insight gleaned from numerical modeling studies into the deceleration of the projectile by the water, cratering of the ocean floor, the late stage modification of the crater due to gravitational collapse, and water resurge. Furthermore, we discuss the generation and propagation of large tsunami-like waves as a result of a strike of a cosmic body in marine environments.

  4. Steel Processing Properties and Their Effect on Impact Deformation of Lightweight Structures

    Energy Technology Data Exchange (ETDEWEB)

    Simunovic, S

    2003-09-23

    The objective of the research was to perform a comprehensive computational analysis of the effects of material and process modeling approaches on performance of UltraLight Steel Auto Body (ULSAB) vehicle models. The research addressed numerous material related effects, impact conditions as well as analyzed the performance of the ULSAB vehicles in crashes against designs representing the current US vehicle fleet. This report is organized into three main sections. The first section describes the results of the computational analysis of ULSAB crash simulations that were performed using advanced material modeling techniques. The effects of strain-rate sensitivity on a high strength steel (HSS) intensive vehicle were analyzed. Frontal and frontal offset crash scenarios were used in a finite element parametric study of the ULSAB body structure. Comparisons are made between the crash results using the piece-wise-linear isotropic plasticity strain-rate dependent material model, and the isotropic plasticity material model based on quasi-static properties. The simulation results show the importance of advanced material modeling techniques for vehicle crash simulations due to strain-rate sensitivity and rapid hardening characteristics of advanced high strength steels. Material substitution was investigated for the main frontal crush structure using the material of similar yield stress a significantly different strain-rate and hardening characteristics. The objective of the research presented in Section 2 was to assess the influence of stamping process on crash response of ULSAB vehicle. Considered forming effects included thickness variations and plastic strain hardening imparted in the part forming process. The as-formed thickness and plastic strain for front crash parts were used as input data for vehicle crash analysis. Differences in structural performance between crash models with and without forming data were analyzed in order to determine the effects and feasibility of

  5. Prescription medicines and the risk of road traffic crashes: a French registry-based study.

    Directory of Open Access Journals (Sweden)

    Ludivine Orriols

    2010-11-01

    Full Text Available In recent decades, increased attention has been focused on the impact of disabilities and medicinal drug use on road safety. The aim of our study was to investigate the association between prescription medicines and the risk of road traffic crashes, and estimate the attributable fraction.We extracted and matched data from three French nationwide databases: the national health care insurance database, police reports, and the national police database of injurious crashes. Drivers identified by their national health care number involved in an injurious crash in France, between July 2005 and May 2008, were included in the study. Medicines were grouped according to the four risk levels of the French classification system (from 0 [no risk] to 3 [high risk]. We included 72,685 drivers involved in injurious crashes. Users of level 2 (odds ratio [OR]  = 1.31 [1.24-1.40] and level 3 (OR  = 1.25 [1.12-1.40] prescription medicines were at higher risk of being responsible for a crash. The association remained after adjustment for the presence of a long-term chronic disease. The fraction of road traffic crashes attributable to levels 2 and 3 medications was 3.3% [2.7%-3.9%]. A within-person case-crossover analysis showed that drivers were more likely to be exposed to level 3 medications on the crash day than on a control day, 30 days earlier (OR  = 1.15 [1.05-1.27].The use of prescription medicines is associated with a substantial number of road traffic crashes in France. In light of the results, warning messages appear to be relevant for level 2 and 3 medications and questionable for level 1 medications. A follow-up study is needed to evaluate the impact of the warning labeling system on road traffic crash prevention.

  6. Predicting Crashes Using Traffic Offences. A Meta-Analysis that Examines Potential Bias between Self-Report and Archival Data

    Science.gov (United States)

    af Wåhlberg, Anders; Freeman, James; Watson, Barry; Watson, Angela

    2016-01-01

    Background Traffic offences have been considered an important predictor of crash involvement, and have often been used as a proxy safety variable for crashes. However the association between crashes and offences has never been meta-analysed and the population effect size never established. Research is yet to determine the extent to which this relationship may be spuriously inflated through systematic measurement error, with obvious implications for researchers endeavouring to accurately identify salient factors predictive of crashes. Methodology and Principal Findings Studies yielding a correlation between crashes and traffic offences were collated and a meta-analysis of 144 effects drawn from 99 road safety studies conducted. Potential impact of factors such as age, time period, crash and offence rates, crash severity and data type, sourced from either self-report surveys or archival records, were considered and discussed. After weighting for sample size, an average correlation of r = .18 was observed over the mean time period of 3.2 years. Evidence emerged suggesting the strength of this correlation is decreasing over time. Stronger correlations between crashes and offences were generally found in studies involving younger drivers. Consistent with common method variance effects, a within country analysis found stronger effect sizes in self-reported data even controlling for crash mean. Significance The effectiveness of traffic offences as a proxy for crashes may be limited. Inclusion of elements such as independently validated crash and offence histories or accurate measures of exposure to the road would facilitate a better understanding of the factors that influence crash involvement. PMID:27128093

  7. STOCK MARKET CRASH AND EXPECTATIONS OF AMERICAN HOUSEHOLDS*

    Science.gov (United States)

    HUDOMIET, PÉTER; KÉZDI, GÁBOR; WILLIS, ROBERT J.

    2011-01-01

    SUMMARY This paper utilizes data on subjective probabilities to study the impact of the stock market crash of 2008 on households’ expectations about the returns on the stock market index. We use data from the Health and Retirement Study that was fielded in February 2008 through February 2009. The effect of the crash is identified from the date of the interview, which is shown to be exogenous to previous stock market expectations. We estimate the effect of the crash on the population average of expected returns, the population average of the uncertainty about returns (subjective standard deviation), and the cross-sectional heterogeneity in expected returns (disagreement). We show estimates from simple reduced-form regressions on probability answers as well as from a more structural model that focuses on the parameters of interest and separates survey noise from relevant heterogeneity. We find a temporary increase in the population average of expectations and uncertainty right after the crash. The effect on cross-sectional heterogeneity is more significant and longer lasting, which implies substantial long-term increase in disagreement. The increase in disagreement is larger among the stockholders, the more informed, and those with higher cognitive capacity, and disagreement co-moves with trading volume and volatility in the market. PMID:21547244

  8. STOCK MARKET CRASH AND EXPECTATIONS OF AMERICAN HOUSEHOLDS.

    Science.gov (United States)

    Hudomiet, Péter; Kézdi, Gábor; Willis, Robert J

    2011-01-01

    This paper utilizes data on subjective probabilities to study the impact of the stock market crash of 2008 on households' expectations about the returns on the stock market index. We use data from the Health and Retirement Study that was fielded in February 2008 through February 2009. The effect of the crash is identified from the date of the interview, which is shown to be exogenous to previous stock market expectations. We estimate the effect of the crash on the population average of expected returns, the population average of the uncertainty about returns (subjective standard deviation), and the cross-sectional heterogeneity in expected returns (disagreement). We show estimates from simple reduced-form regressions on probability answers as well as from a more structural model that focuses on the parameters of interest and separates survey noise from relevant heterogeneity. We find a temporary increase in the population average of expectations and uncertainty right after the crash. The effect on cross-sectional heterogeneity is more significant and longer lasting, which implies substantial long-term increase in disagreement. The increase in disagreement is larger among the stockholders, the more informed, and those with higher cognitive capacity, and disagreement co-moves with trading volume and volatility in the market.

  9. Advances in crash dummies

    NARCIS (Netherlands)

    Wismans, J.

    2001-01-01

    Thorough knowledge of the characteristics of the human body and its behaviour under extreme loading conditions is essential in order to prevent the serious consequences of road and other accidents. This field of research is called injury or impact biomechanics. In order to study human body response

  10. Impact of bacterial ice nucleating particles on weather predicted by a numerical weather prediction model

    Science.gov (United States)

    Sahyoun, Maher; Korsholm, Ulrik S.; Sørensen, Jens H.; Šantl-Temkiv, Tina; Finster, Kai; Gosewinkel, Ulrich; Nielsen, Niels W.

    2017-12-01

    Bacterial ice-nucleating particles (INP) have the ability to facilitate ice nucleation from super-cooled cloud droplets at temperatures just below the melting point. Bacterial INP have been detected in cloud water, precipitation, and dry air, hence they may have an impact on weather and climate. In modeling studies, the potential impact of bacteria on ice nucleation and precipitation formation on global scale is still uncertain due to their small concentration compared to other types of INP, i.e. dust. Those earlier studies did not account for the yet undetected high concentration of nanoscale fragments of bacterial INP, which may be found free or attached to soil dust in the atmosphere. In this study, we investigate the sensitivity of modeled cloud ice, precipitation and global solar radiation in different weather scenarios to changes in the fraction of cloud droplets containing bacterial INP, regardless of their size. For this purpose, a module that calculates the probability of ice nucleation as a function of ice nucleation rate and bacterial INP fraction was developed and implemented in a numerical weather prediction model. The threshold value for the fraction of cloud droplets containing bacterial INP needed to produce a 1% increase in cloud ice was determined at 10-5 to 10-4. We also found that increasing this fraction causes a perturbation in the forecast, leading to significant differences in cloud ice and smaller differences in convective and total precipitation and in net solar radiation reaching the surface. These effects were most pronounced in local convective events. Our results show that bacterial INP can be considered as a trigger factor for precipitation, but not an enhancement factor.

  11. Illiquidity Contagion and Liquidity Crashes

    OpenAIRE

    Giovanni Cespa; Thierry Foucault

    2014-01-01

    Liquidity providers often learn information about an asset from prices of other assets. We show that this generates a self-reinforcing positive relationship between price informativeness and liquidity. This relationship causes liquidity spillovers and is a source of fragility: a small drop in the liquidity of one asset can, through a feedback loop, result in a very large drop in market liquidity and price informativeness (a liquidity crash). This feedback loop provides a new explanation for c...

  12. Observed and unobserved correlation between crash avoidance manoeuvers and crash severity

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2015-01-01

    Understanding drivers’ responses to critical events, analyzing drivers’ abilities to perform corrective manoeuvers, and investigating the correlation between these manoeuvers and crash severity provide the opportunity of increasing the knowledge about how to avoid crash occurrence or at least mit...

  13. Development of a Numerical Model of Hypervelocity Impact into a Pressurized Composite Overwrapped Pressure Vessel

    Science.gov (United States)

    Garcia, M. A.; Davis, B. A.; Miller, J. E.

    2017-01-01

    As the outlook for space exploration becomes more ambitious and spacecraft travel deeper into space than ever before, it is increasingly important that propulsion systems perform reliably within the space environment. The increased reliability compels designers to increase design margin at the expense of system mass, which contrasts with the need to limit vehicle mass to maximize payload. Such are the factors that motivate the integration of high specific strength composite materials in the construction of pressure vessels commonly referred to as composite overwrapped pressure vessels (COPV). The COPV consists of a metallic liner for the inner shell of the COPV that is stiff, negates fluid permeation and serves as the anchor for composite laminates or filaments, but the liner itself cannot contain the stresses from the pressurant it contains. The compo-site-fiber reinforced polymer (CFRP) is wound around the liner using a combination of hoop (circumferential) and helical orientations. Careful consideration of wrap orientation allows the composite to evenly bear structural loading and creates the COPV's characteristic high strength to weight ratio. As the CFRP overwrap carries most of the stresses induced by pressurization, damage to the overwrap can affect mission duration, mission success and potentially cause loss-of-vehicle/loss-of-crew. For this reason, it is critical to establish a fundamental understanding of the mechanisms involved in the failure of a stressed composite such as that of the COPV. One of the greatest external threats to the integrity of a spacecraft's COPV is an impact from the meteoroid and orbital debris environments (MMOD). These impacts, even from submillimeter particles, generate extremely high stress states in the CFRP that can damage numerous fibers. As a result of this possibility, initial assumptions in survivability analysis for some human-rated NASA space-craft have assumed that any alteration of the vessel due to impact is

  14. A Numerical Study on Impact of Taiwan Island Surface Heat Flux on Super Typhoon Haitang (2005

    Directory of Open Access Journals (Sweden)

    Hongxiong Xu

    2015-01-01

    Full Text Available Three to four tropical cyclones (TCs by average usually impact Taiwan every year. This study, using the Developmental Tested Center (DTC version of the Hurricane WRF (HWRF model, examines the effects of Taiwan’s island surface heat fluxes on typhoon structure, intensity, track, and its rainfall over the island. The numerical simulation successfully reproduced the structure and intensity of super Typhoon Haitang. The model, especially, reproduced the looped path and landfall at nearly the right position. Sensitive experiments indicated that Taiwan’s surface heat fluxes have significant influence on the super Typhoon Haitang. Compared to sensible heat (SH fluxes, latent heat (LH is the dominant factor affecting the intensity and rainfall, but they showed opposite effects on intensity and rainfall. LH (SH flux of Taiwan Island intensified (weakened Typhoon Haitang’s intensity and structure by transferring more energy from (to surface. However, only LH played a major role in the looped path before the landfall of the Typhoon Haitang.

  15. Numerical analysis of single particle impact in the context of Cold Spray: a new adhesion model

    Science.gov (United States)

    Profizi, P.; Combescure, A.; Ogawa, K.

    2016-03-01

    A new adhesion model for numerical simulation of single particle impact in the context of Cold Spray is introduced. As in other studies, cohesive forces are put between the particle and substrate to account for adhesion. In this study however, the forces are put only when a local physical criterion is met. The physical phenomenon most often attributed to Cold Spray adhesion is a shear stress instability. The Johnson-Cook material law is used with a shear damage softening law to enable strong localization at the interface without the need for an extremely fine mesh. This localization is then detected as a drop in local yield stress value by the algorithm, which then implements a local cohesive force. The evolution of this cohesive force is defined by an energy dissipative cohesive model, using a surface adhesion energy as a material parameter. Each cohesive link is broken once all its associated surface energy is dissipated. A criterion on the damage value is also used to break a cohesive bond prematurely, to account for the effect of erosion at higher speeds. This model is found to reproduce the Cold Spray-like adhesion behavior with observed critical and maximum speeds.

  16. Religion and stock price crash risk: Evidence

    Directory of Open Access Journals (Sweden)

    Wenfei Li

    2016-09-01

    Full Text Available This paper investigates whether religious traditions influence firm-specific crash risk in China. Using a sample of A-share listed firms from 2003 to 2013, we provide evidence that the more intense the religious environment, the lower the stock price crash risk, implying that religion plays an important role in Chinese corporate governance. Further, we find that (1 religion affects stock price crash risk by reducing earnings management and the management perk problem; (2 different religions have different effects, and Taoism, in particular, is unrelated to crash risk; and (3 the effects of religion are more pronounced with higher quality corporate governance and a stronger legal environment. Religion constrains the management agency problem, thus reducing stock price crash risk in China. Our paper enriches the literature on stock price crash risk and religion, and on new economic geography.

  17. Comparison of moped, scooter and motorcycle crash risk and crash severity.

    Science.gov (United States)

    Blackman, Ross A; Haworth, Narelle L

    2013-08-01

    The increased popularity of mopeds and motor scooters in Australia and elsewhere in the last decade has contributed substantially to the greater use of powered two-wheelers (PTWs) as a whole. As the exposure of mopeds and scooters has increased, so too has the number of reported crashes involving those PTW types, but there is currently little research comparing the safety of mopeds and, particularly, larger scooters with motorcycles. This study compared the crash risk and crash severity of motorcycles, mopeds and larger scooters in Queensland, Australia. Comprehensive data cleansing was undertaken to separate motorcycles, mopeds and larger scooters in police-reported crash data covering the five years to 30 June 2008. The crash rates of motorcycles (including larger scooters) and mopeds in terms of registered vehicles were similar over this period, although the moped crash rate showed a stronger downward trend. However, the crash rates in terms of distance travelled were nearly four times higher for mopeds than for motorcycles (including larger scooters). More comprehensive distance travelled data is needed to confirm these findings. The overall severity of moped and scooter crashes was significantly lower than motorcycle crashes but an ordered probit regression model showed that crash severity outcomes related to differences in crash characteristics and circumstances, rather than differences between PTW types per se. Greater motorcycle crash severity was associated with higher (>80km/h) speed zones, horizontal curves, weekend, single vehicle and nighttime crashes. Moped crashes were more severe at night and in speed zones of 90km/h or more. Larger scooter crashes were more severe in 70km/h zones (than 60km/h zones) but not in higher speed zones, and less severe on weekends than on weekdays. The findings can be used to inform potential crash and injury countermeasures tailored to users of different PTW types. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Vehicular crash data used to rank intersections by injury crash frequency and severity

    OpenAIRE

    Liu, Yi; Li, Zongzhi; Liu, Jingxian; Patel, Harshingar

    2016-01-01

    This article contains data on research conducted in “A double standard model for allocating limited emergency medical service vehicle resources ensuring service reliability” (Liu et al., 2016) [1]. The crash counts were sorted out from comprehensive crash records of over one thousand major signalized intersections in the city of Chicago from 2004 to 2010. For each intersection, vehicular crashes were counted by crash severity levels, including fatal, injury Types A, B, and C for major, modera...

  19. Understanding traffic crash under-reporting

    DEFF Research Database (Denmark)

    Janstrup, Kira Hyldekær; Kaplan, Sigal; Hels, Tove

    2016-01-01

    Objective: This study aligns to the body of research dedicated to estimating the underreporting of road crash injuries and adds the perspective of understanding individual and crash factors contributing to the decision to report a crash to the police, the hospital, or both. Method: This study foc...... policy measures aimed at increasing the reporting rate by targeting specific road user groups (e.g., males, young road users) or specific situational factors (e.g., slight injuries, arm injuries, leg injuries, weekend)....

  20. Modelling and mitigation of Flash Crashes

    OpenAIRE

    Fry, John; Serbera, Jean-Philippe

    2017-01-01

    The algorithmic trading revolution has had a dramatic effect upon markets. Trading has become faster, and in some ways more efficient, though potentially at the cost higher volatility and increased uncertainty. Stories of predatory trading and flash crashes constitute a new financial reality. Worryingly, highly capitalised stocks may be particularly vulnerable to flash crashes. Amid fears of high-risk technology failures in the global financial system we develop a model for flash crashes....

  1. AP English language & composition crash course

    CERN Document Server

    Hogue, Dawn

    2012-01-01

    AP English Language & Composition Crash Course - Gets You a Higher Advanced Placement Score in Less Time Crash Course is perfect for the time-crunched student, the last-minute studier, or anyone who wants a refresher on the subject. AP English Language & Composition Crash Course gives you: Targeted, Focused Review - Study Only What You Need to Know Crash Course is based on an in-depth analysis of the AP English Language & Composition course description outline and actual Advanced Placement test questions. It covers only the information tested on the exam, so you can make the most of your valua

  2. AP calculus AB & BC crash course

    CERN Document Server

    Rosebush, J

    2012-01-01

    AP Calculus AB & BC Crash Course - Gets You a Higher Advanced Placement Score in Less Time Crash Course is perfect for the time-crunched student, the last-minute studier, or anyone who wants a refresher on the subject. AP Calculus AB & BC Crash Course gives you: Targeted, Focused Review - Study Only What You Need to Know Crash Course is based on an in-depth analysis of the AP Calculus AB & BC course description outline and actual AP test questions. It covers only the information tested on the exams, so you can make the most of your valuable study time. Written by experienced math teachers, our

  3. Large truck and bus crash facts, 2008. 

    Science.gov (United States)

    2010-03-01

    This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2008. Selected crash statistics on passenger : vehicles are also presen...

  4. A comprehensive engineering analysis of motorcycle crashes in Maryland.

    Science.gov (United States)

    2010-12-01

    The goal of this study was to identify recurring or common road characteristics of motorcycle crashes : in Maryland from 1998 to 2007. Motorcycle crash data was obtained from the National Highway : Traffic Safety Administrations Crash Outcome Data...

  5. 2008 South Dakota motor vehicle traffic crash summary

    Science.gov (United States)

    2009-06-01

    The Motor Vehicle Traffic Crash Summary is divided into two main sections, Historical : Trends and 2008 Motor Vehicle Traffic Crash Profile. The Historical Trend section : provides information on alcohol involvement in motor vehicle crashes, severity...

  6. 2010 South Dakota motor vehicle traffic crash summary

    Science.gov (United States)

    2011-01-01

    The Motor Vehicle Traffic Crash Summary is divided into two main sections, Historical Trends and 2010 Motor Vehicle Traffic Crash Profile. The Historical Trend section provides information on alcohol involvement in motor vehicle crashes, severity of ...

  7. 2009 South Dakota motor vehicle traffic crash summary

    Science.gov (United States)

    2010-06-01

    The Motor Vehicle Traffic Crash Summary is divided into two main sections, Historical : Trends and 2009 Motor Vehicle Traffic Crash Profile. The Historical Trend section : provides information on alcohol involvement in motor vehicle crashes, severity...

  8. CDC Vital Signs: Motor Vehicle Crash Injuries: Costly but Preventable

    Science.gov (United States)

    ... Press Kit Read the MMWR Science Clips Motor Vehicle Crash Injuries Costly but Preventable Language: English (US) ... and how to prevent future crashes. Problem Motor vehicle crashes are a leading cause of injury in ...

  9. Numerical Methods and Turbulence Modeling for LES of Piston Engines: Impact on Flow Motion and Combustion

    Directory of Open Access Journals (Sweden)

    Misdariis A.

    2013-11-01

    Full Text Available In this article, Large Eddy Simulations (LES of Spark Ignition (SI engines are performed to evaluate the impact of the numerical set-upon the predictedflow motion and combustion process. Due to the high complexity and computational cost of such simulations, the classical set-up commonly includes “low” order numerical schemes (typically first or second-order accurate in time and space as well as simple turbulence models (such as the well known constant coefficient Smagorinsky model (Smagorinsky J. (1963 Mon. Weather Rev. 91, 99-164. The scope of this paper is to evaluate the feasibility and the potential benefits of using high precision methods for engine simulations, relying on higher order numerical methods and state-of-the-art Sub-Grid-Scale (SGS models. For this purpose, two high order convection schemes from the Two-step Taylor Galerkin (TTG family (Colin and Rudgyard (2000 J. Comput. Phys. 162, 338-371 and several SGS turbulence models, namely Dynamic Smagorinsky (Germano et al. (1991 Phys. Fluids 3, 1760-1765 and sigma (Baya Toda et al. (2010 Proc. Summer Program 2010, Stanford, Center for Turbulence Research, NASA Ames/Stanford Univ., pp. 193-202 are considered to improve the accuracy of the classically used Lax-Wendroff (LW (Lax and Wendroff (1964 Commun. Pure Appl. Math. 17, 381-398 - Smagorinsky set-up. This evaluation is performed considering two different engine configurations from IFP Energies nouvelles. The first one is the naturally aspirated four-valve spark-ignited F7P engine which benefits from an exhaustive experimental and numerical characterization. The second one, called Ecosural, is a highly supercharged spark-ignited engine. Unique realizations of engine cycles have been simulated for each set-up starting from the same initial conditions and the comparison is made with experimental and previous numerical results for the F7P configuration. For the Ecosural engine, experimental results are not available yet and only

  10. A comparison of freeway median crash frequency, severity, and barrier strike outcomes by median barrier type.

    Science.gov (United States)

    Russo, Brendan J; Savolainen, Peter T

    2018-08-01

    Median-crossover crashes are among the most hazardous events that can occur on freeways, often resulting in severe or fatal injuries. The primary countermeasure to reduce the occurrence of such crashes is the installation of a median barrier. When installation of a median barrier is warranted, transportation agencies are faced with the decision among various alternatives including concrete barriers, beam guardrail, or high-tension cable barriers. Each barrier type differs in terms of its deflection characteristics upon impact, the required installation and maintenance costs, and the roadway characteristics (e.g., median width) where installation would be feasible. This study involved an investigation of barrier performance through an in-depth analysis of crash frequency and severity data from freeway segments where high-tension cable, thrie-beam, and concrete median barriers were installed. A comprehensive manual review of crash reports was conducted to identify crashes in which a vehicle left the roadway and encroached into the median. This review also involved an examination of crash outcomes when a barrier strike occurred, which included vehicle containment, penetration, or re-direction onto the travel lanes. The manual review of crash reports provided critical supplementary information through narratives and diagrams not normally available through standard fields on police crash report forms. Statistical models were estimated to identify factors that affect the frequency, severity, and outcomes of median-related crashes, with particular emphases on differences between segments with varying median barrier types. Several roadway-, traffic-, and environmental-related characteristics were found to affect these metrics, with results varying across the different barrier types. The results of this study provide transportation agencies with important guidance as to the in-service performance of various types of median barrier. Copyright © 2018 Elsevier Ltd. All rights

  11. Changes in the Severity and Injury Sources of Thoracic Aorta Injuries due to Vehicular Crashes.

    Science.gov (United States)

    Ryb, Gabriel; Dischinger, Patricia; Kerns, Timothy; Burch, Cynthia; Rabin, Joseph; Ho, Shiu

    Research using the National Automotive Sampling System-Crashworthiness Data System (NASS-CDS) suggested a decreased adjusted risk of thoracic aorta injuries (TAI) for newer vehicles during near-side crashes and an increased adjusted TAI risk during frontal crashes. This study attempted to explore possible explanations of these findings. Adult front seat occupants in the Crash Injury Research and Engineering Network (CIREN) database through June 2012 were studied. TAI cases were compared with remaining cases in relation to crash and vehicular characteristics. TAI cases of later crash year (CY) (2004-2012) were compared to those in earlier CY (1996-2003) in relation to TAI severity (minor, moderate, severe and non-survivable). TAI cases in newer model year (MY) vehicles (1999-2012) were compared to those in older vehicles (1988-98) in relation to injury source (steering wheel, front, left, seat belt, air bag and other or unknown). Analysis was stratified by direction of impact (frontal and near-side) and the use of restraints. The similar TAI severity of earlier and later CY among frontal crashes suggests that the observed changes in the adjusted odds of injury seen in NASS-CDS are not due to an increase in injury detection. The decrease in TAI severity among newer vehicles in near-side crashes of later CY is consistent with a beneficial effect of crashworthiness improvements for this crash configuration. A shift of injury source in frontal crashes from the steering wheel in older vehicles to "front of vehicle structures", "seat belts" and "unknown and other" in newer vehicles should suggest potential sites for crashworthiness improvements.

  12. Can a stochastic cusp catastrophe model explain stock market crashes?

    Czech Academy of Sciences Publication Activity Database

    Baruník, Jozef; Vošvrda, Miloslav

    2009-01-01

    Roč. 33, č. 10 (2009), s. 1824-1836 ISSN 0165-1889 R&D Projects: GA ČR GD402/09/H045; GA ČR GA402/09/0965 Grant - others:GAUK(CZ) 46108 Institutional research plan: CEZ:AV0Z10750506 Keywords : Stochastic cusp catastrophe * Bifurcations * Singularity * Nonlinear dynamics * Stock market crash Subject RIV: AH - Economics Impact factor: 1.097, year: 2009

  13. Numerical modelling of climate change impacts on freshwater lenses on the North Sea Island of Borkum

    Science.gov (United States)

    Sulzbacher, H.; Wiederhold, H.; Siemon, B.; Grinat, M.; Igel, J.; Burschil, T.; Günther, T.; Hinsby, K.

    2012-03-01

    A numerical variable-density groundwater model is set up for the North Sea Island of Borkum to estimate climate change impacts on coastal aquifers and especially the situation of barrier islands in the Wadden Sea. The database includes information from boreholes, a seismic survey, a helicopter-borne electromagnetic survey (HEM), monitoring of the freshwater-saltwater boundary by vertical electrode chains in two boreholes, measurements of groundwater table, pumping and slug tests, as well as water samples. Based on a statistical analysis of borehole columns, seismic sections and HEM, a hydrogeological model is set up. The groundwater model is developed using the finite-element programme FEFLOW. The variable-density groundwater model is calibrated on the basis of hydraulic, hydrological and geophysical data, in particular spatial HEM and local monitoring data. Verification runs with the calibrated model show good agreement between measured and computed hydraulic heads. A good agreement is also obtained between measured and computed density or total dissolved solids data for both the entire freshwater lens on a large scale and in the area of the well fields on a small scale. For simulating future changes in this coastal groundwater system until the end of the current century we use the climate scenario A2, specified by the Intergovernmental Panel on Climate Change and in particular the data for the German North Sea coast. Simulation runs show proceeding salinization with time beneath the well fields of the two waterworks Waterdelle and Ostland. The modelling study shows that spreading of well fields is an appropriate protection measure against excessive salinization of the water supply until the end of the current century.

  14. Comparison of teen and adult driver crash scenarios in a nationally representative sample of serious crashes.

    Science.gov (United States)

    McDonald, Catherine C; Curry, Allison E; Kandadai, Venk; Sommers, Marilyn S; Winston, Flaura K

    2014-11-01

    Motor vehicle crashes are the leading cause of death and acquired disability during the first four decades of life. While teen drivers have the highest crash risk, few studies examine the similarities and differences in teen and adult driver crashes. We aimed to: (1) identify and compare the most frequent crash scenarios-integrated information on a vehicle's movement prior to crash, immediate pre-crash event, and crash configuration-for teen and adult drivers involved in serious crashes, and (2) for the most frequent scenarios, explore whether the distribution of driver critical errors differed for teens and adult drivers. We analyzed data from the National Motor Vehicle Crash Causation Survey, a nationally representative study of serious crashes conducted by the U.S. National Highway Traffic Safety Administration from 2005 to 2007. Our sample included 642 16- to 19-year-old and 1167 35- to 54-year-old crash-involved drivers (weighted n=296,482 and 439,356, respectively) who made a critical error that led to their crash's critical pre-crash event (i.e., event that made the crash inevitable). We estimated prevalence ratios (PR) and 95% confidence intervals (CI) to compare the relative frequency of crash scenarios and driver critical errors. The top five crash scenarios among teen drivers, accounting for 37.3% of their crashes, included: (1) going straight, other vehicle stopped, rear end; (2) stopped in traffic lane, turning left at intersection, turn into path of other vehicle; (3) negotiating curve, off right edge of road, right roadside departure; (4) going straight, off right edge of road, right roadside departure; and (5) stopped in lane, turning left at intersection, turn across path of other vehicle. The top five crash scenarios among adult drivers, accounting for 33.9% of their crashes, included the same scenarios as the teen drivers with the exception of scenario (3) and the addition of going straight, crossing over an intersection, and continuing on a

  15. Arithmetic and algebraic problem solving and resource allocation: the distinct impact of fluid and numerical intelligence.

    Science.gov (United States)

    Dix, Annika; van der Meer, Elke

    2015-04-01

    This study investigates cognitive resource allocation dependent on fluid and numerical intelligence in arithmetic/algebraic tasks varying in difficulty. Sixty-six 11th grade students participated in a mathematical verification paradigm, while pupil dilation as a measure of resource allocation was collected. Students with high fluid intelligence solved the tasks faster and more accurately than those with average fluid intelligence, as did students with high compared to average numerical intelligence. However, fluid intelligence sped up response times only in students with average but not high numerical intelligence. Further, high fluid but not numerical intelligence led to greater task-related pupil dilation. We assume that fluid intelligence serves as a domain-general resource that helps to tackle problems for which domain-specific knowledge (numerical intelligence) is missing. The allocation of this resource can be measured by pupil dilation. Copyright © 2014 Society for Psychophysiological Research.

  16. The Effect of Alcohol and Road Traffic Policies on Crash Rates in Botswana, 2004–2011: A Time-Series Analysis

    OpenAIRE

    Sebego, Miriam; Naumann, Rebecca B.; Rudd, Rose A.; Voetsch, Karen; Dellinger, Ann M.; Ndlovu, Christopher

    2014-01-01

    In Botswana, increased development and motorization have brought increased road traffic-related death rates. Between 1981 and 2001, the road traffic-related death rate in Botswana more than tripled. The country has taken several steps over the last several years to address the growing burden of road traffic crashes and particularly to address the burden of alcohol-related crashes. This study examines the impact of the implementation of alcohol and road safety-related policies on crash rates, ...

  17. Crash-Tech 2001. Conference; Crash-Tech 2001. Tagung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Improved active and passive safety of motor vehicles has resulted in a very much improved accident statistics. This conference discussed further optimisations in motor car safety. The harmonisation of test specifications world-wide was gone into, with particular interest in compatibility. Safety specifications resulting from current accident research and new legislation were gone into, and the current state of measuring and technology in crash testing was outlined. [German] Aufgrund der Verbesserungen in der aktiven und passiven Sicherheit von Fahrzeugen weisen die Unfallstatistiken in vielen europaeischen Laendern eine erfreuliche Tendenz auf. Die Tagung wird sich mit den Moeglichkeiten der weiteren Optimierung der Verkehrssicherheit befassen. Die 'Crash-Tech 2001' will sich mit dem Motto 'Sind wir auf dem Weg zum World NCAP?' der Harmonisierung der Testvorschriften unter Einbeziehung der Kompatibilitaet widmen. Dazu werden Anforderungen an die Fahrzeugsicherheit diskutiert, die sich sowohl aus der aktuellen Unfallforschung als auch aus den Vorschriften ergeben. Weiterhin wird der aktuelle Stand der Mess- und Versuchstechnik im Unfallversuch vorgestellt. (orig.)

  18. Influences of pre-crash braking induced dummy - forward displacements on dummy behaviour during EuroNCAP frontal crashtest.

    Science.gov (United States)

    Woitsch, Gernot; Sinz, Wolfgang

    2014-01-01

    Combination of active and passive safety systems is a future key to further improvement in vehicle safety. Autonomous braking systems are able to reduce collision speeds, and therefore severity levels significantly. Passengers change their position due to pre-impact vehicle motion, a fact, which has not yet been considered in common crash tests. For this paper, finite elements simulations of crash tests were performed to show that forward displacements due to pre-crash braking do not necessarily increase dummy load levels. So the influence of different pre-crash scenarios, all leading to equal closing speeds in the crash phase, are considered in terms of vehicle motion (pitching, deceleration) and restraint system configurations (belt load limiter, pretensioner). The influence is evaluated by dummy loads as well as contact risk between the dummy and the interior. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Experimental and Numerical Analysis of Hull Girder Vibrations and Bow Impact of a Large Ship Sailing in Waves

    Directory of Open Access Journals (Sweden)

    Jialong Jiao

    2015-01-01

    Full Text Available It is of great importance to evaluate the hull structural vibrations response of large ships in extreme seas. Studies of hydroelastic response of an ultra large ship have been conducted with comparative verification between experimental and numerical methods in order to estimate the wave loads response considering hull vibration and water impact. A segmented self-propelling model with steel backbone system was elaborately designed and the experiments were performed in a tank. Time domain numerical simulations of the ship were carried out by using three-dimensional nonlinear hydroelasticity theory. The results from the computational analyses have been correlated with those from model tests.

  20. System crash as dynamics of complex networks.

    Science.gov (United States)

    Yu, Yi; Xiao, Gaoxi; Zhou, Jie; Wang, Yubo; Wang, Zhen; Kurths, Jürgen; Schellnhuber, Hans Joachim

    2016-10-18

    Complex systems, from animal herds to human nations, sometimes crash drastically. Although the growth and evolution of systems have been extensively studied, our understanding of how systems crash is still limited. It remains rather puzzling why some systems, appearing to be doomed to fail, manage to survive for a long time whereas some other systems, which seem to be too big or too strong to fail, crash rapidly. In this contribution, we propose a network-based system dynamics model, where individual actions based on the local information accessible in their respective system structures may lead to the "peculiar" dynamics of system crash mentioned above. Extensive simulations are carried out on synthetic and real-life networks, which further reveal the interesting system evolution leading to the final crash. Applications and possible extensions of the proposed model are discussed.

  1. Using a Numerical Model to Assess the Geomorphic Impacts of Forest Management Scenarios on Streams

    Science.gov (United States)

    Davidson, S. L.; Eaton, B. C.

    2014-12-01

    In-stream large wood governs the morphology of many small to intermediate streams, while riparian vegetation influences bank strength and channel pattern. Forest management practices such as harvesting and fire suppression therefore dramatically influence channel processes and associated aquatic habitat. The primary objective of this research is to compare the impacts of three common forest scenarios - natural fire disturbance, forest harvesting with a riparian buffer, and fire suppression - on the volume of in-channel wood and the complexity of aquatic habitat in channels at a range of scales. Each scenario is explored through Monte Carlo simulations run over a period of 1000 years using a numerical reach scale channel simulator (RSCS), with variations in tree toppling rate and forest density used to represent each forest management trajectory. The habitat complexity associated with each scenario is assessed based on the area of the bed occupied by pools and spawning sized sediment, the availability of wood cover, and the probability of avulsion. Within the fire scenario, we also use the model to separately investigate the effects of root decay and recovery on equilibrium channel geometry by varying the rooting depth and associated bank strength through time. The results show that wood loading and habitat complexity are influenced by the timing and magnitude of wood recruitment, as well as channel scale. The forest harvesting scenario produces the lowest wood loads and habitat complexity so long as the buffer width is less than the average mature tree height. The natural fire cycle produces the greatest wood loading and habitat complexity, but also the greatest variability because these streams experience significant periods without wood recruitment as forests regenerate. In reaches that experience recurrent fires, width increases in the post-fire period as roots decay, at times producing a change in channel pattern when a threshold width to depth ratio is

  2. Ionization impact on molecular clouds and star formation: Numerical simulations and observations

    International Nuclear Information System (INIS)

    Tremblin, Pascal

    2012-01-01

    At all the scales of Astrophysics, the impact of the ionization from massive stars is a crucial issue. At the galactic scale, the ionization can regulate star formation by supporting molecular clouds against gravitational collapse and at the stellar scale, indications point toward a possible birth place of the Solar System close to massive stars. At the molecular cloud scale, it is clear that the hot ionized gas compresses the surrounding cold gas, leading to the formation of pillars, globules, and shells of dense gas in which some young stellar objects are observed. What are the formation mechanisms of these structures? Are the formation of these young stellar objects triggered or would have they formed anyway? Do massive stars have an impact on the distribution of the surrounding gas? Do they have an impact on the mass distribution of stars (the initial mass function, IMF)? This thesis aims at shedding some light on these questions, by focusing especially on the formation of the structures between the cold and the ionized gas. We present the state of the art of the theoretical and observational works on ionized regions (H II regions) and we introduce the numerical tools that have been developed to model the ionization in the hydrodynamic simulations with turbulence performed with the HERACLES code. Thanks to the simulations, we present a new model for the formation of pillars based on the curvature and collapse of the dense shell on itself and a new model for the formations of cometary globules based on the turbulence of the cold gas. Several diagnostics have been developed to test these new models in the observations. If pillars are formed by the collapse of the dense shell on itself, the velocity spectrum of a nascent pillar presents a large spectra with a red-shifted and a blue-shifted components that are caused by the foreground and background parts of the shell that collapse along the line of sight. If cometary globules emerge because of the turbulence of

  3. Response of equipment in nuclear power plants to airplane crash

    International Nuclear Information System (INIS)

    Schalk, M.; Woelfel, H.

    1976-01-01

    Nuclear power plants in Germany are to be designed against airplane crash. Two problems arise: first, the local problem of penetration as well as local destruction of the building and secondly the airplane induced vibrations of the whole building which cause loadings for secondary systems (equipment). This paper deals especially with the second problem. Floor response spectra due to airplane crash are presented for two different power plant buildings. The influence of various parameters (time history of excitation, direction and location of impact, mathematical model, soil, damping, etc.) are discussed. A comparison with the results of earthquake loading is given. Suggestions are made for developing suitable floor design spectra and using them to analyse multidegree-of-freedom systems. However, the paper gives only a partial answer to the questions arising because of some important restrictions which had to be made. Studies concerning these restrictions are still being conducted and will be presented in a separate paper. (Auth.)

  4. Structural integrity analysis of an Ignalina nuclear power plant building subjected to an airplane crash

    International Nuclear Information System (INIS)

    Dundulis, Gintautas; Kulak, Ronald F.; Marchertas, Algirdas; Uspuras, Eugenijus

    2007-01-01

    Recent terrorist attacks using commandeered commercial airliners on civil structures have raised the issue of the ability of nuclear power plants to survive the consequences of an airliner crash. The structural integrity analysis due to the effects of an aircraft crash on an Ignalina nuclear power plant (INPP) accident localization system (ALS) building is the subject of this paper. A combination of the finite element method and empirical relationships were used for the analysis. A global structural integrity analysis was performed for a portion of the ALS building using the dynamic loading from an aircraft crash impact model. The local effects caused by impact of the aircraft's engine on the building wall were evaluated independently by using an empirical formula. The results from the crash analysis of a twin engine commercial aircraft show that the impacted reinforced concrete wall of the ALS building will not have through-the-wall concrete failure, and the reinforcement will not fail. Strain-rate effects were found to delay the onset of cracking. Therefore, the structural integrity of the impacted wall of the INPP ALS building will be maintained during the crash event studied

  5. Structural integrity analysis of an Ignalina nuclear power plant building subjected to an airplane crash

    Energy Technology Data Exchange (ETDEWEB)

    Dundulis, Gintautas [Laboratory of Nuclear Installation Safety, Lithuanian Energy Institute, 3 Breslaujos, 44403 Kaunas-35 (Lithuania)]. E-mail: gintas@isag.lei.lt; Kulak, Ronald F. [RFK Engineering Mechanics Consultants (United States); Marchertas, Algirdas [Northern Illinois University (United States); Uspuras, Eugenijus [Laboratory of Nuclear Installation Safety, Lithuanian Energy Institute, 3 Breslaujos, 44403 Kaunas-35 (Lithuania)

    2007-08-15

    Recent terrorist attacks using commandeered commercial airliners on civil structures have raised the issue of the ability of nuclear power plants to survive the consequences of an airliner crash. The structural integrity analysis due to the effects of an aircraft crash on an Ignalina nuclear power plant (INPP) accident localization system (ALS) building is the subject of this paper. A combination of the finite element method and empirical relationships were used for the analysis. A global structural integrity analysis was performed for a portion of the ALS building using the dynamic loading from an aircraft crash impact model. The local effects caused by impact of the aircraft's engine on the building wall were evaluated independently by using an empirical formula. The results from the crash analysis of a twin engine commercial aircraft show that the impacted reinforced concrete wall of the ALS building will not have through-the-wall concrete failure, and the reinforcement will not fail. Strain-rate effects were found to delay the onset of cracking. Therefore, the structural integrity of the impacted wall of the INPP ALS building will be maintained during the crash event studied.

  6. Assessing crash risk considering vehicle interactions with trucks using point detector data.

    Science.gov (United States)

    Hyun, Kyung Kate; Jeong, Kyungsoo; Tok, Andre; Ritchie, Stephen G

    2018-03-12

    Trucks have distinct driving characteristics in general traffic streams such as lower speeds and limitations in acceleration and deceleration. As a consequence, vehicles keep longer headways or frequently change lane when they follow a truck, which is expected to increase crash risk. This study introduces several traffic measures at the individual vehicle level to capture vehicle interactions between trucks and non-trucks and analyzed how the measures affect crash risk under different traffic conditions. The traffic measures were developed using headways obtained from Inductive Loop Detectors (ILDs). In addition, a truck detection algorithm using a Gaussian Mixture (GM) model was developed to identify trucks and to estimate truck exposure from ILD data. Using the identified vehicle types from the GM model, vehicle interaction metrics were categorized into three groups based on the combination of leading and following vehicle types. The effects of the proposed traffic measures on crash risk were modeled in two different cases of prior- and non-crash using a case-control approach utilizing a conditional logistic regression. Results showed that the vehicle interactions between the leading and following vehicle types were highly associated with crash risk, and further showed different impacts on crash risk by traffic conditions. Specifically, crashes were more likely to occur when a truck following a non-truck had shorter average headway but greater headway variance in heavy traffic while a non-truck following a truck had greater headway variance in light traffic. This study obtained meaningful conclusions that vehicle interactions involved with trucks were significantly related to the crash likelihood rather than the measures that estimate average traffic condition such as total volume or average headway of the traffic stream. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Commercial truck crash injury severity analysis using gradient boosting data mining model.

    Science.gov (United States)

    Zheng, Zijian; Lu, Pan; Lantz, Brenda

    2018-06-01

    Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

  8. Differences in Factors Affecting Various Crash Types with High Numbers of Fatalities and Injuries in China

    Science.gov (United States)

    Wang, Kai; He, Jie; Ding, Jianxun; Shi, Qin; Wang, Changjun; Li, Pingfan

    2016-01-01

    Objectives Road traffic crashes that involve very high numbers of fatalities and injuries arouse public concern wherever they occur. In China, there are two categories of such crashes: a crash that results in 10–30 fatalities, 50–100 serious injuries or a total cost of 50–100 million RMB ($US8-16m) is a “serious road traffic crash” (SRTC), while a crash that is even more severe or costly is a “particularly serious road traffic crash” (PSRTC). The aim of this study is to identify the main factors affecting different types of these crashes (single-vehicle, head-on, rear-end and side impact) with the ultimate goal of informing prevention activities and policies. Methods Detailed descriptions of the SRTCs and PSRTCs that occurred from 2007 to 2014 were collected from the database “In-depth Investigation and Analysis System for Major Road Traffic Crashes” (IIASMRTC), which is maintained by the Traffic Management Research Institute of the Ministry of Public Security of China (TMRI). 18 main risk factors, which were categorized into four areas (participant, vehicle, road and environment-related) were chosen as potential independent variables for the multinomial logistic regression analysis. Comparisons were made among the single-vehicle, head-on, rear-end and side impact crashes in terms of factors affecting crash occurrence. Findings Five risk factors were significant for the six multinomial logistic regression models, which were location, vertical alignment, roadside safety rating, driver distraction and overloading of cargo. It was indicated that intersections were more likely to have side impact SRTCs and PSRTCs, especially with poor visibility at night. Overloaded freight vehicles were more likely to be involved in a rear-end crash than other freight vehicles. Driver distraction is an important risk factor for head-on crashes, while vertical alignment and roadside safety rating are positively associated with single-vehicle crashes. Conclusion Based

  9. Numerical simulating and experimental study on the woven carbon fiber-reinforced composite laminates under low-velocity impact

    Science.gov (United States)

    Liu, Hanyang; Tang, Zhanwen; Pan, Lingying; Zhao, Weidong; Sun, Baogang; Jiang, Wenge

    2016-05-01

    Impact damage has been identified as a critical form of the defects that constantly threatened the reliability of composite structures, such as those used in the aerospace structures and systems. Low energy impacts can introduce barely visible damage and cause the degradation of structural stiffness, furthermore, the flaws caused by low-velocity impact are so dangerous that they can give rise to the further extended delaminations. In order to improve the reliability and load carrying capacity of composite laminates under low-velocity impact, in this paper, the numerical simulatings and experimental studies on the woven fiber-reinforced composite laminates under low-velocity impact with impact energy 16.7J were discussed. The low velocity impact experiment was carried out through drop-weight system as the reason of inertia effect. A numerical progressive damage model was provided, in which the damages of fiber, matrix and interlamina were considered by VUMT subroutine in ABAQUS, to determine the damage modes. The Hashin failure criteria were improved to cover the failure modes of fiber failure in the directions of warp/weft and delaminations. The results of Finite Element Analysis (FEA) were compared with the experimental results of nondestructive examination including the results of ultrasonic C-scan, cross-section stereomicroscope and contact force - time history curves. It is found that the response of laminates under low-velocity impact could be divided into stages with different damage. Before the max-deformation of the laminates occurring, the matrix cracking, fiber breakage and delaminations were simulated during the impactor dropping. During the releasing and rebounding period, matrix cracking and delaminations areas kept increasing in the laminates because of the stress releasing of laminates. Finally, the simulating results showed the good agreements with the results of experiment.

  10. Evaluation of an autonomous braking system in real-world PTW crashes.

    Science.gov (United States)

    Savino, Giovanni; Pierini, Marco; Rizzi, Matteo; Frampton, Richard

    2013-01-01

    Powered 2-wheelers (PTWs) are becoming increasingly popular in Europe. They have the ability to get around traffic queues, thus lowering fuel consumption and increasing mobility. The risk of rider injury in a traffic crash is however much higher than that associated with car users. The European project, Powered Two Wheeler Integrated Safety (PISa), identified an autonomous braking system (AB) as a priority to reduce the injury consequences of a PTW crash. The aim of this study was to assess the potential effectiveness of the AB system developed in PISa, taking into account the specific system characteristics that emerged during the design, development and testing phases. Fifty-eight PTW cases representing European crash configurations were examined, in which 43 percent of riders sustained a Maximum Abbreviated Injury Scale (MAIS) 2+ injury. Two of the most common crash types were a PTW impacting a stationary object (car following scenario) 16% and an object pulling across the PTW path (crossing scenario) 54%. An expert team analysed the in-depth material of the sample crashes and determined a posteriori to what extent the AB would have affected the crash. For those cases where the AB was evaluated as applicable, a further quantitative evaluation of the benefits was conducted by considering a set of different possible rider reactions in addition to that exhibited in the actual crash. In 67 percent of cases, the application of AB could have mitigated the crash outcome. Analysis of those real crash cases showed the potential for an expert rider to avoid the collision. An early reaction of the rider, associated with a correct application of the brakes would have avoided 18 of the 37 car following/crossing scenarios. Conversely, according to the analysis, an expert rider would not have been able to avoid 19 of the 37 cases. In 14 of those 19 cases, the AB would have contributed to mitigating the crash outcome. This study demonstrated significant potential for

  11. Prevalence of driver physical factors leading to unintentional lane departure crashes.

    Science.gov (United States)

    Cicchino, Jessica B; Zuby, David S

    2017-07-04

    Some lane-keeping assist systems in development and production provide autonomous braking and steering to correct unintentional lane drift but otherwise require drivers to fully control their vehicles. The goal of this study was to quantify the proportion of drivers involved in unintentional lane drift crashes who would be unable to regain control of their vehicles to inform the design of such systems. The NHTSA's National Motor Vehicle Crash Causation Survey collected in-depth, on-scene data for a nationally representative sample of 5,470 U.S. police-reported passenger vehicle crashes during 2005-2007 that occurred between 6 a.m. and midnight and for which emergency medical services were dispatched. The physical states of drivers involved in the 631 lane drift crashes in the sample, which represented 259,034 crashes nationally, were characterized. Thirty-four percent of drivers who crashed because they drifted from their lanes were sleeping or otherwise incapacitated. These drivers would be unlikely to regain full control of their vehicles if an active safety system prevented their initial drift. An additional 13% of these drivers had a nonincapacitating medical issue, blood alcohol concentration (BAC) ≥ 0.08%, or other physical factor that may not allow them to regain full vehicle control. When crashes involved serious or fatal injuries, 42% of drivers who drifted were sleeping or otherwise incapacitated, and an additional 14% were impacted by a nonincapacitating medical issue, BAC ≥ 0.08%, or other physical factor. Designers of active safety systems that provide autonomous lateral control should consider that a substantial proportion of drivers at risk of lane drift crashes are incapacitated. Systems that provide only transient corrective action may not ultimately prevent lane departure crashes for these drivers, and drivers who do avoid lane drift crashes because of these systems may be at high risk of other types of crashes when they attempt to regain

  12. Numerical simulation of the impact of water-air fronts on radionuclides plumes in heterogeneous media

    International Nuclear Information System (INIS)

    Aquino, J.; Francisco, A.S.; Pereira, F.; Amaral Souto, H.P.

    2004-01-01

    The goal of this paper is to investigate the interaction of water-air fronts with radionuclide plumes in unsaturated heterogeneous porous media. This problem is modeled by a system of equations that describes both the water-air flow and the radionuclide transport. The water-air problem is solved numerically by a mixed finite element combined with a non-oscillatory central difference scheme. For the radionuclide transport equation we use the Modified Method of Characteristics (MMOC). We present the results of numerical simulations for heterogeneous permeability fields taking into account sorption effects. (author)

  13. Crash data modeling with a generalized estimator.

    Science.gov (United States)

    Ye, Zhirui; Xu, Yueru; Lord, Dominique

    2018-05-11

    The investigation of relationships between traffic crashes and relevant factors is important in traffic safety management. Various methods have been developed for modeling crash data. In real world scenarios, crash data often display the characteristics of over-dispersion. However, on occasions, some crash datasets have exhibited under-dispersion, especially in cases where the data are conditioned upon the mean. The commonly used models (such as the Poisson and the NB regression models) have associated limitations to cope with various degrees of dispersion. In light of this, a generalized event count (GEC) model, which can be generally used to handle over-, equi-, and under-dispersed data, is proposed in this study. This model was first applied to case studies using data from Toronto, characterized by over-dispersion, and then to crash data from railway-highway crossings in Korea, characterized with under-dispersion. The results from the GEC model were compared with those from the Negative binomial and the hyper-Poisson models. The cases studies show that the proposed model provides good performance for crash data characterized with over- and under-dispersion. Moreover, the proposed model simplifies the modeling process and the prediction of crash data. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Numerical Simulation of Output Response of PVDF Sensor Attached on a Cantilever Beam Subjected to Impact Loading

    Directory of Open Access Journals (Sweden)

    Cao Vu Dung

    2016-04-01

    Full Text Available Polyvinylidene Flouride (PVDF is a film-type polymer that has been used as sensors and actuators in various applications due to its mechanical toughness, flexibility, and low density. A PVDF sensor typically covers an area of the host structure over which mechanical stress/strain is averaged and converted to electrical energy. This study investigates the fundamental “stress-averaging” mechanism for dynamic strain sensing in the in-plane mode. A numerical simulation was conducted to simulate the “stress-averaging” mechanism of a PVDF sensor attached on a cantilever beam subjected to an impact loading, taking into account the contribution of piezoelectricity, the cantilever beam’s modal properties, and electronic signal conditioning. Impact tests and FEM analysis were also carried out to verify the numerical simulation results. The results of impact tests indicate the excellent capability of the attached PVDF sensor in capturing the fundamental natural frequencies of the cantilever beam. There is a good agreement between the PVDF sensor’s output voltage predicted by the numerical simulation and that obtained in the impact tests. Parametric studies were conducted to investigate the effects of sensor size and sensor position and it is shown that a larger sensor tends to generate higher output voltage than a smaller one at the same location. However, the effect of sensor location seems to be more significant for larger sensors due to the cancelling problem. Overall, PVDF sensors exhibit excellent sensing capability for in-plane dynamic strain induced by impact loading.

  15. Impact of Working Memory Training Targeting the Central Executive on Kindergarteners' Numerical Skills

    Science.gov (United States)

    Honoré, Nastasya; Noël, Marie-Pascale

    2017-01-01

    Working memory capacities are associated with mathematical development. Many studies have tried to improve working memory abilities through training. Furthermore, the central executive has been shown to be the component of working memory, which is the most strongly related to numerical and arithmetical skills. Therefore, we developed a training…

  16. Short-term impact of pictorial posters and a crash course on radiographic errors for improving the quality of paediatric chest radiographs in an unsupervised unit - a pilot study for quality-assurance outreach

    International Nuclear Information System (INIS)

    Tebogo Hlabangana, Linda; Andronikou, Savvas

    2015-01-01

    Chest radiography is the most commonly performed diagnostic X-ray examination. The radiation dose to the patient for this examination is relatively low but because of its frequent use, the contribution to the collective dose is considerable. Optimized image quality not only allows for more accurate diagnosis but also supports radiation protection, which is particularly important in children. To determine whether the introduction of a poster of technical errors in paediatric radiography accompanied by a short lecture (crash course) for radiographers on common errors can sustainably decrease the number and rate of these errors in an unsupervised radiology department (without a paediatric-trained radiologist or paediatric-trained radiography personnel). We conducted a pilot study for quality-assurance outreach, with retrospective and prospective components, in the paediatric radiology department of a teaching hospital. The technical errors in frontal chest radiographs performed in the unit were assessed by quality-assurance analysis using a customized tick-sheet. The review was performed before and after an intervention that involved a half-hour crash course and poster displays in the department. We compared the rate of technical errors made before and after the intervention. There was statistically significant improvement in quality of radiographs (P 2 months after the intervention. A simple intervention of a crash course and poster placement resulted in improved quality of paediatric chest radiographs. A decline in quality after 2 months suggests the need to repeat this or another type of intervention regularly. (orig.)

  17. Macro-level vulnerable road users crash analysis: A Bayesian joint modeling approach of frequency and proportion.

    Science.gov (United States)

    Cai, Qing; Abdel-Aty, Mohamed; Lee, Jaeyoung

    2017-10-01

    This study aims at contributing to the literature on pedestrian and bicyclist safety by building on the conventional count regression models to explore exogenous factors affecting pedestrian and bicyclist crashes at the macroscopic level. In the traditional count models, effects of exogenous factors on non-motorist crashes were investigated directly. However, the vulnerable road users' crashes are collisions between vehicles and non-motorists. Thus, the exogenous factors can affect the non-motorist crashes through the non-motorists and vehicle drivers. To accommodate for the potentially different impact of exogenous factors we convert the non-motorist crash counts as the product of total crash counts and proportion of non-motorist crashes and formulate a joint model of the negative binomial (NB) model and the logit model to deal with the two parts, respectively. The formulated joint model is estimated using non-motorist crash data based on the Traffic Analysis Districts (TADs) in Florida. Meanwhile, the traditional NB model is also estimated and compared with the joint model. The result indicates that the joint model provides better data fit and can identify more significant variables. Subsequently, a novel joint screening method is suggested based on the proposed model to identify hot zones for non-motorist crashes. The hot zones of non-motorist crashes are identified and divided into three types: hot zones with more dangerous driving environment only, hot zones with more hazardous walking and cycling conditions only, and hot zones with both. It is expected that the joint model and screening method can help decision makers, transportation officials, and community planners to make more efficient treatments to proactively improve pedestrian and bicyclist safety. Published by Elsevier Ltd.

  18. Effects from airplane crashes and gas explosions to Leningrad nuclear plant

    International Nuclear Information System (INIS)

    Junttila, K.; Varpasuo, P.

    1998-01-01

    In this study the effects of aircraft crash and gas explosion to Leningrad Nuclear Power Plant has been researched. One of the two reactor buildings is modeled with finite element method using the pre-processor program MSC/PATRAN and analyzed with MSC/NASTRAN analysis program. In MSC/PATRAN or FEMAP, which is a pre-processor program of MSC/NASTRAN for Windows, the reactor building of the plant has been modeled with shell and beam elements and the load sets describing the aircraft crash and gas explosion have been developed. The crash loads are from Cessna 210 civil airplane crash with impact velocity 360 km/h and maximum impact force of 7 MN and Phantom RF-43 military airplane crash with impact velocity 215 m/s and with maximum impact force of 110 MN. The gas explosion pressure wave simulates the deflagration wave with maximum pressure of 0,045 MPa. Seven Cessna 210 airplane crash locations, two Phantom RF-43 airplane crash locations and one gas explosion load case is modeled. Airplane crash loads were from different directions and to different points of impact in the reactor building. The gas explosion load was assumed to affect the reactor building from one side parallel to one of the global coordinate axes of the model. With MSC/NASTRAN reactions from loads are analyzed. All loads were timedependent; their magnitude varied with time and consequently the analysis was carried out with the aid of transient response analysis. Time step in Cessna 210 analysis was 0,003 s and in Phantom RF-43 and gas explosion analyses 0,01 s. The greatest displacement from Cessna 210 loads was 12 mm and from Phantom RF-43 load 344 mm. The last value shows that construction would fail with that load. The greatest displacement from gas explosion load was 68 mm. Stresses are not so interesting in this preliminary analysis of the effects, but they are shown in pictures embedded in the report text. Displacements were greatest in upper part of the reactor building, where no intersections

  19. Factors Contributing to Crashes among Young Drivers

    Directory of Open Access Journals (Sweden)

    Lyndel J. Bates

    2014-08-01

    Full Text Available Young drivers are the group of drivers most likely to crash. There are a number of factors that contribute to the high crash risk experienced by these drivers. While some of these factors are intrinsic to the young driver, such as their age, gender or driving skill, others relate to social factors and when and how often they drive. This article reviews the factors that affect the risk of young drivers crashing to enable a fuller understanding of why this risk is so high in order to assist in developing effective countermeasures.

  20. Full-Scale Crash Test of an MD-500 Helicopter

    Science.gov (United States)

    Littell, Justin

    2011-01-01

    A full-scale crash test was successfully conducted in March 2010 of an MD-500 helicopter at NASA Langley Research Center s Landing and Impact Research Facility. The reasons for conducting this test were threefold: 1 To generate data to be used with finite element computer modeling efforts, 2 To study the crashworthiness features typically associated with a small representative helicopter, and 3 To compare aircraft response to data collected from a previously conducted MD-500 crash test, which included an externally deployable energy absorbing (DEA) concept. Instrumentation on the airframe included accelerometers on various structural components of the airframe; and strain gages on keel beams, skid gear and portions of the skin. Three Anthropomorphic Test Devices and a specialized Human Surrogate Torso Model were also onboard to collect occupant loads for evaluation with common injury risk criteria. This paper presents background and results from this crash test conducted without the DEA concept. These results showed accelerations of approximately 30 to 50 g on the airframe at various locations, little energy attenuation through the airframe, and moderate to high probability of occupant injury for a variety of injury criteria.

  1. Braking News: the Link between Crash Severity and Crash Avoidance Maneuvers

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2012-01-01

    the ordered-response nature of severity while allowing for changes in effects across severity levels. The data sample for estimation consists of single-vehicle crashes extracted from the General Estimates System (GES) crash database for the period 2005-2009. Results show the correlation between crash...... severity. These trends suggest that effort should be posed toward understanding the reaction mechanisms to different critical events, improving in-vehicle warning systems, promoting responsible driving behavior, and designing forgiving infrastructures....

  2. Experimental Study and Numerical Modelling of Low Velocity Impact on Laminated Composite Reinforced with Thin Film Made of Carbon Nanotubes

    Science.gov (United States)

    El Moumen, A.; Tarfaoui, M.; Hassoon, O.; Lafdi, K.; Benyahia, H.; Nachtane, M.

    2018-04-01

    In this work, polymer laminated composites based on Epon 862 Epoxy resin, T300 6 k carbon fibers and carbon nanotubes (CNTs) were tested with the aim to elucidate the effect of CNTs on impact properties including impact force and capacity to absorb impact energy. The polymer matrix was reinforced by a random distribution of CNTs with fraction ranging from 0.5 to 4.wt%. Composite panels were manufactured by using the infusion process. Taylor impact test was used to obtain the impact response of specimens. Projectile manufactured from a high strength and hardened steel with a diameter of 20 mm and 1.5 kg of mass was launched by a compressed gas gun within the velocity of 3 m/s. Impact force histories and absorbed energy of specimens were recorded. A numerical model was employed to simulate the impact performance. This model has been accomplished by forming a user established subroutine (VUMAT) and executing it in ABAQUS software. Finally, the effect of CNTs amount on dynamic properties of laminated composites was discussed.

  3. Homogenization of Vehicle Fleet Frontal Crash Pulses from 2000–2010

    Science.gov (United States)

    Locey, Caitlin M.; Garcia-Espana, J. Felipe; Toh, Akira; Belwadi, Aditya; Arbogast, Kristy B.; Maltese, Matthew R.

    2012-01-01

    Full-scale vehicle crash tests are performed globally to assess vehicle structure and restraint system performance. The crash pulse, captured by accelerometers mounted within the occupant compartment, measures the motion of the vehicle during the impact event. From an occupant’s perspective, the crash pulse is the inertial event to which the vehicle’s restraint systems must respond in order to mitigate the forces and accelerations that act on a passenger, and thus reduce injury risk. The objective of this study was to quantify the characteristics of crash pulses for different vehicle types in the contemporary North American fleet, and delineate current trends in crash pulse evolution. NHTSA and Transport Canada crash test databases were queried for full-frontal rigid barrier crash tests of passenger vehicles model year 2000–2010 with impact angle equaling zero degrees. Acceleration-time histories were analyzed for all accelerometers attached to the vehicle structure within the occupant compartment. Custom software calculated the following crash pulse characteristics (CPCs): peak deceleration, time of peak deceleration, onset rate, pulse duration, and change in velocity. Vehicle body types were classified by adapting the Highway Loss Data Institute (HLDI) methodology, and vehicles were assigned a generation start year in place of model year in order to more accurately represent structural change over time. 1094 vehicle crash tests with 2795 individual occupant compartment-mounted accelerometers were analyzed. We found greater peak decelerations and and shorter pulse durations across multiple vehicle types in newer model years as compared to older. For midsize passenger cars, large passenger cars, and large SUVs in 56 km/h rigid barrier tests, maximum deceleration increased by 0.40, 0.96, and 1.57 g/year respectively, and pulse duration decreased by 0.74, 1.87, and 2.51 ms/year. We also found that the crash pulse characteristics are becoming more homogeneous in

  4. Numerical and experimental analysis of the impact of a nuclear spent fuel cask

    Energy Technology Data Exchange (ETDEWEB)

    Aquaro, D. [Department of Mechanical, Nuclear and Production Engineering (DIMNP), Pisa University, Via Diotisalvi, Pisa (Italy); Zaccari, N., E-mail: nicola.zaccari@enel.i [Department of Mechanical, Nuclear and Production Engineering (DIMNP), Pisa University, Via Diotisalvi, Pisa (Italy); Di Prinzio, M.; Forasassi, G. [Department of Mechanical, Nuclear and Production Engineering (DIMNP), Pisa University, Via Diotisalvi, Pisa (Italy)

    2010-04-15

    This paper deals with the numerical and experimental analyses of a shell type shock absorber for a nuclear spent fuel cask. Nine-meter free drop tests performed on reduced scale models are described. The results are compared with numerical simulations performed with FEM computer codes, considering reduced scale models as well as the prototype. The paper shows the results of a similitude analysis, with which the data obtained by means of the reduced scale models can be extrapolated to the prototype. Small discrepancies were obtained using large-scale models (1:2 and 1:6), while small-scale models (1:12) did not give reliable results. A 1:9 scale model provided useful information with a less than 20% error.

  5. Numerical simulation of deformation and failure processes of a complex technical object under impact loading

    Science.gov (United States)

    Kraus, E. I.; Shabalin, I. I.; Shabalin, T. I.

    2018-04-01

    The main points of development of numerical tools for simulation of deformation and failure of complex technical objects under nonstationary conditions of extreme loading are presented. The possibility of extending the dynamic method for construction of difference grids to the 3D case is shown. A 3D realization of discrete-continuum approach to the deformation and failure of complex technical objects is carried out. The efficiency of the existing software package for 3D modelling is shown.

  6. Numerical study of impact and solidification of a droplet over a deposited frozen splat

    International Nuclear Information System (INIS)

    Ghafouri-Azar, R.; Mostaghimi, J.; Chandra, S.

    2002-01-01

    The impact and solidification of a molten tin droplet on another solidified splat was studied for varying offset spacing using a three-dimensional model of droplet impact. It was found the final shapes of impinging droplets were sensitive to the offset distance. The model applies a fixed-grid Eulerian control volume method to solve the fluid dynamics and heat transfer in the droplet. The model employs a Volume of Fluid (VOF) algorithm to track free surface deformation. Predictions of droplet shapes during impact from the model agreed well with experimental photographs. (author)

  7. Numerical simulation and experiment of high-intensity current pulsed impact on the structure body

    International Nuclear Information System (INIS)

    Li Mintang; Yan Ping; Yuan Weiqun; Sun Yaohong; Sun Lianhua; Zhou Yuan; Liu Chuanpu

    2010-01-01

    To better understand the characteristics of the impulse force formed by pulse current of electromagnetic rail propulsion system, and to explore effective ways to improve the support structure of rails, a set of impulse force test system was designed, and the work-related test situation was numerically simulated. Several impulse force waveforms formed by different pulse current waveforms were achieved by using an armature as a source of impulse force in this test system, and two curves of waveform were comparatively analyzed. The armature existing in the environment of coupling fields including electric field and magnetic field and force field was carried out numerical calculation by using the software of ANSYS, and the coupling force field was emphatically analyzed to calculate the electromagnetic driving force and the electromagnetic clamping force acting on the armature, and the structure stress and deformation was also analyzed. The results showed that the curves of electromagnetic driving force computed by numerical simulation and the curves of impulse force obtained by experiment were basically the same, and the value of peak points' error was increasing along with the increase of pulse current, but the curves still showed some common characteristics. This verified that the test method we used in this paper was proper to capture the impulse force, and the method of calculation was also feasible and effective. (authors)

  8. Large Truck Crash Causation Study (LTCCS)

    Data.gov (United States)

    Department of Transportation — The Large Truck* Crash Causation Study (LTCCS) is based on a three-year data collection project conducted by the Federal Motor Carrier Safety Administration (FMCSA)...

  9. Economic Cost of Crashes in Idaho

    Science.gov (United States)

    2016-06-01

    The Idaho Transportation Departments Office of Highway Safety contracted with Cambridge Systematics (CS) for an assessment of the feasibility of calculating the Idaho-specific economic and comprehensive costs associated with vehicle crashes. Resea...

  10. Motor Vehicle Crash Injuries PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    This 60 second Public Service Announcement is based on the October 2014 CDC Vital Signs report. Motor vehicle crashes are costly and preventable. Learn what can be done to help prevent motor vehicle injuries.

  11. Exploring cycle crash characteristics in Malaysia

    Directory of Open Access Journals (Sweden)

    Hamzah A.

    2017-01-01

    Full Text Available This paper explains the cycle road crash trend, characteristics and injuries in Malaysia. It analyses the in-depth road crash investigation data collected by the Royal Malaysian Police which was made available to MIROS crash database. Fatality data was utilized due to its consistency. Cycle casualties reflected a continual downward pattern for year 2009 to 2014 in which the number of cycle crash involvement reduced by 49% and fatalities dropped by 42%. Among the prevalent factors of cycle fatalities are >60 age group, federal and state roads and straight road sections, rural and small towns, evening peak hours, and mainly involving cars and motorcycles. It is hoped that all these information would spark interests to improve cycle safety in Malaysia.

  12. Syncope and Motor Vehicle Crash Risk

    DEFF Research Database (Denmark)

    Numé, Anna-Karin; Gislason, Gunnar; Christiansen, Christine Benn

    2016-01-01

    IMPORTANCE: Syncope may have serious consequences for traffic safety. Current clinical guideline recommendations on driving following syncope are primarily based on expert consensus. OBJECTIVE: To identify whether there is excess risk of motor vehicle crashes among patients with syncope compared...... vehicle crashes throughout the follow-up period. This study suggests that syncope should be considered as one of several factors in a broad assessment of fitness to drive....

  13. Multinational Corporations and Stock Price Crash Risk

    Directory of Open Access Journals (Sweden)

    Anthony May

    2016-10-01

    Full Text Available A nascent literature in finance and accounting on tail risk in individual stock returns concludes that bad news hoarding by corporate managers engenders sudden, extreme crashes in a firm’s stock price when the bad news is eventually made public. This literature finds that firm-specific crash risk is higher among firms with more severe asymmetric information and agency problems. A hitherto disjointed literature spanning the fields of international business, finance, and accounting suggests that geographic dispersion in a firm’s operations, and especially dispersion across different countries, gives rise to organizational complexities and greater costs of monitoring that can exacerbate asymmetric information and agency problems. Motivated by the confluence of arguments and findings from these two strands of literature, this paper examines whether stock price crash risk is higher among multinational firms than domestic firms. Using a large sample of U.S. headquartered firms during 1987-2011, we find robust evidence that multinational firms are significantly more likely to crash than domestic firms. Moreover, we show that the difference in crash risk between multinational and domestic firms is most acute among firms with weaker corporate governance mechanisms, including weaker shareholder rights, less independent boards, and less stable institutional ownership. Our analysis indicates that stronger monitoring from each of these three governance mechanisms significantly attenuates the positive relation between crash risk and multinationality. Our findings are robust to the use of alternative measures of crash risk and to controlling for known determinants of crash risk identified in prior studies. Our study offers new insights that should hold value for scholars and market participants interested in understanding the implications of heighted agency problems that multinational firms are likely to encounter and scholars and market participants

  14. A probabilistic quantitative risk assessment model for the long-term work zone crashes.

    Science.gov (United States)

    Meng, Qiang; Weng, Jinxian; Qu, Xiaobo

    2010-11-01

    Work zones especially long-term work zones increase traffic conflicts and cause safety problems. Proper casualty risk assessment for a work zone is of importance for both traffic safety engineers and travelers. This paper develops a novel probabilistic quantitative risk assessment (QRA) model to evaluate the casualty risk combining frequency and consequence of all accident scenarios triggered by long-term work zone crashes. The casualty risk is measured by the individual risk and societal risk. The individual risk can be interpreted as the frequency of a driver/passenger being killed or injured, and the societal risk describes the relation between frequency and the number of casualties. The proposed probabilistic QRA model consists of the estimation of work zone crash frequency, an event tree and consequence estimation models. There are seven intermediate events--age (A), crash unit (CU), vehicle type (VT), alcohol (AL), light condition (LC), crash type (CT) and severity (S)--in the event tree. Since the estimated value of probability for some intermediate event may have large uncertainty, the uncertainty can thus be characterized by a random variable. The consequence estimation model takes into account the combination effects of speed and emergency medical service response time (ERT) on the consequence of work zone crash. Finally, a numerical example based on the Southeast Michigan work zone crash data is carried out. The numerical results show that there will be a 62% decrease of individual fatality risk and 44% reduction of individual injury risk if the mean travel speed is slowed down by 20%. In addition, there will be a 5% reduction of individual fatality risk and 0.05% reduction of individual injury risk if ERT is reduced by 20%. In other words, slowing down speed is more effective than reducing ERT in the casualty risk mitigation. 2010 Elsevier Ltd. All rights reserved.

  15. Impact of mussel bioengineering on fine-grained sediment dynamics in a coastal lagoon: a numerical modelling investigation

    DEFF Research Database (Denmark)

    Forsberg, Pernille Louise; Lumborg, Ulrik; Bundgaard, Klavs

    2017-01-01

    Rødsand lagoon in southeast Denmark is a non-tidal coastal lagoon. It is home to a wide range of marine flora and fauna and part of the Natura 2000 network. An increase in turbidity through elevated levels of suspended sediment concentration (SSC) within the lagoon may affect the ecosystem health...... due to reduced light penetration. Increasing SSC levels within Rødsand lagoon could be caused by increasing storm intensity or by a sediment spill from dredging activities west of the lagoon in relation to the planned construction of the Fehmarnbelt fixed link between Denmark and Germany. The aim...... of the study was to investigate the impact of a mussel reef on sediment import and SSC in a semi-enclosed lagoon through the development of a bioengineering modelling application that makes it possible to include the filtrating effect of mussels in a numerical model of the lagoonal system. The numerical...

  16. Relationship of Near-Crash/Crash Risk to Time Spent on a Cell Phone While Driving.

    Science.gov (United States)

    Farmer, Charles M; Klauer, Sheila G; McClafferty, Julie A; Guo, Feng

    2015-01-01

    The objective of this study was to examine in a naturalistic driving setting the dose-response relationship between cell phone usage while driving and risk of a crash or near crash. How is the increasing use of cell phones by drivers associated with overall near-crash/crash risk (i.e., during driving times both on and off the phone)? Day-to-day driving behavior of 105 volunteer subjects was monitored over a period of 1 year. A random sample was selected comprised of 4 trips from each month that each driver was in the study, and in-vehicle video was used to classify driver behavior. The proportion of driving time spent using a cell phone was estimated for each 3-month period and correlated with overall crash and near-crash rates for each period. Thus, it was possible to test whether changes in an individual driver's cell phone use over time were associated with changes in overall near-crash/crash risk. Drivers in the study spent 11.7% of their driving time interacting with a cell phone, primarily talking on the phone (6.5%) or simply holding the phone in their hand or lap (3.7%). The risk of a near-crash/crash event was approximately 17% higher when the driver was interacting with a cell phone, due primarily to actions of reaching for/answering/dialing, which nearly triples risk (relative risk = 2.84). However, the amount of driving time spent interacting with a cell phone did not affect a driver's overall near-crash/crash risk. Vehicle speeds within 6 s of the beginning of each call on average were 5-6 mph lower than speeds at other times. Results of this naturalistic driving study are consistent with the observation that increasing cell phone use in the general driving population has not led to increased crash rates. Although cell phone use can be distracting and crashes have occurred during this distraction, overall crash rates appear unaffected by changes in the rate of cell phone use, even for individual drivers. Drivers compensate somewhat for the distraction

  17. On the impact of communication complexity in the design of parallel numerical algorithms

    Science.gov (United States)

    Gannon, D.; Vanrosendale, J.

    1984-01-01

    This paper describes two models of the cost of data movement in parallel numerical algorithms. One model is a generalization of an approach due to Hockney, and is suitable for shared memory multiprocessors where each processor has vector capabilities. The other model is applicable to highly parallel nonshared memory MIMD systems. In the second model, algorithm performance is characterized in terms of the communication network design. Techniques used in VLSI complexity theory are also brought in, and algorithm independent upper bounds on system performance are derived for several problems that are important to scientific computation.

  18. Priorities and Potential of Pedestrian Protection - Accident data, Experimental tests and Numerical Simulations of Car-to-Pedestrian Impacts

    OpenAIRE

    Fredriksson, Rikard

    2011-01-01

    Pedestrian disability and fatality as a consequence of car crashes is a large global health problem. To introduce maximally effective car-based countermeasures it is important to understand which injuries are most common and from which car parts they originate. It is also important to focus on the most severe injuries resulting in disability or death. The aim of this thesis was therefore to determine priorities for and evaluate the potential of car-mounted safety systems designed to mitigate ...

  19. The distracted mind on the wheel: Overall propensity to mind wandering is associated with road crash responsibility.

    Science.gov (United States)

    Gil-Jardiné, Cédric; Née, Mélanie; Lagarde, Emmanuel; Schooler, Jonathan; Contrand, Benjamin; Orriols, Ludivine; Galera, Cédric

    2017-01-01

    The role of distractions on attentional lapses that place road users in higher risk of crash remains poorly understood. We aimed to assess the respective impact of (i) mind wandering trait (propensity to mind wander in the everyday life as measured with a set of 4 questions on the proportion of time spent mind wandering in 4 different situations) and (ii) mind wandering state (disturbing thoughts just before the crash) on road crash risk using a comparison between responsible and non-responsible drivers. 954 drivers injured in a road crash were interviewed at the adult emergency department of the Bordeaux university hospital in France (2013-2015). Responsibility for the crash, mind wandering (trait/state), external distraction, alcohol use, psychotropic drug use, and sleep deprivation were evaluated. Based on questionnaire reports, 39% of respondents were classified with a mind wandering trait and 13% reported a disturbing thought just before the crash. While strongly correlated, mind wandering state and trait were independently associated with responsibility for a traffic crash (State: OR = 2.51, 95% CI: 1.64-3.83 and Trait: OR = 1.62, 95% CI: 1.22-2.16 respectively). Self-report of distracting thoughts therefore did not capture the entire risk associated with the propensity of the mind to wander, either because of under-reported thoughts and/or other deleterious mechanisms to be further explored.

  20. The distracted mind on the wheel: Overall propensity to mind wandering is associated with road crash responsibility.

    Directory of Open Access Journals (Sweden)

    Cédric Gil-Jardiné

    Full Text Available The role of distractions on attentional lapses that place road users in higher risk of crash remains poorly understood. We aimed to assess the respective impact of (i mind wandering trait (propensity to mind wander in the everyday life as measured with a set of 4 questions on the proportion of time spent mind wandering in 4 different situations and (ii mind wandering state (disturbing thoughts just before the crash on road crash risk using a comparison between responsible and non-responsible drivers. 954 drivers injured in a road crash were interviewed at the adult emergency department of the Bordeaux university hospital in France (2013-2015. Responsibility for the crash, mind wandering (trait/state, external distraction, alcohol use, psychotropic drug use, and sleep deprivation were evaluated. Based on questionnaire reports, 39% of respondents were classified with a mind wandering trait and 13% reported a disturbing thought just before the crash. While strongly correlated, mind wandering state and trait were independently associated with responsibility for a traffic crash (State: OR = 2.51, 95% CI: 1.64-3.83 and Trait: OR = 1.62, 95% CI: 1.22-2.16 respectively. Self-report of distracting thoughts therefore did not capture the entire risk associated with the propensity of the mind to wander, either because of under-reported thoughts and/or other deleterious mechanisms to be further explored.

  1. The trend of road traffic crashes at urban signalised intersection

    Science.gov (United States)

    Farhana Nasarrudin, Nurul; Razelan, Intan Suhana Mohd

    2018-04-01

    Road traffic crash is one of the main contributing factors for deaths in the world. Intersection is listed as the second road type which road crashes occurred frequently. Hence, the traffic light was installed to minimise the road crashes at intersection. However, the crashes are still occurring and arising. The objective of this study was to exhibit the trend of road crashes at the signalised intersections. The data of road crashes for the past 6 years were analysed using descriptive analysis. The results showed that the road traffic crashes at three- and four-legged signalised intersection recorded the increasing trend. In conclusion, this finding shows that the road traffic crashes for these types of signalised intersection in Malaysia is rising. It is also one the contributors to the increasing number of crashes in Malaysia. This finding will encourage the local authority to conduct awareness programs on the safety at the signalised intersection.

  2. Short-term impact of pictorial posters and a crash course on radiographic errors for improving the quality of paediatric chest radiographs in an unsupervised unit - a pilot study for quality-assurance outreach

    Energy Technology Data Exchange (ETDEWEB)

    Tebogo Hlabangana, Linda; Andronikou, Savvas [University of the Witwatersrand, Department of Diagnostic Radiology, Johannesburg (South Africa)

    2014-08-17

    Chest radiography is the most commonly performed diagnostic X-ray examination. The radiation dose to the patient for this examination is relatively low but because of its frequent use, the contribution to the collective dose is considerable. Optimized image quality not only allows for more accurate diagnosis but also supports radiation protection, which is particularly important in children. To determine whether the introduction of a poster of technical errors in paediatric radiography accompanied by a short lecture (crash course) for radiographers on common errors can sustainably decrease the number and rate of these errors in an unsupervised radiology department (without a paediatric-trained radiologist or paediatric-trained radiography personnel). We conducted a pilot study for quality-assurance outreach, with retrospective and prospective components, in the paediatric radiology department of a teaching hospital. The technical errors in frontal chest radiographs performed in the unit were assessed by quality-assurance analysis using a customized tick-sheet. The review was performed before and after an intervention that involved a half-hour crash course and poster displays in the department. We compared the rate of technical errors made before and after the intervention. There was statistically significant improvement in quality of radiographs (P < 0.0083) performed immediately after the intervention. There was a statistically significant decline in the quality of radiographs performed >2 months after the intervention. A simple intervention of a crash course and poster placement resulted in improved quality of paediatric chest radiographs. A decline in quality after 2 months suggests the need to repeat this or another type of intervention regularly. (orig.)

  3. Numerical simulation of self-oscillations of human vocal folds with Hertz model of impact forces

    Czech Academy of Sciences Publication Activity Database

    Horáček, Jaromír; Šidlof, Petr; Švec, J. G.

    2005-01-01

    Roč. 20, č. 6 (2005), s. 853-869 ISSN 0889-9746 R&D Projects: GA AV ČR IAA2076401 Institutional research plan: CEZ:AV0Z20760514 Keywords : flow induced vibrations * human voice biomechanics * post-critical behaviour Subject RIV: BI - Acoustics Impact factor: 0.832, year: 2005

  4. Control of humanoid robot motions with impacts : numerical experiments with reference spreading control

    NARCIS (Netherlands)

    Rijnen, M.W.L.M.; De Mooij, E.B.C.; Traversaro, S.; Nori, F.; Van De Wouw, N.; Saccon, A.; Nijmeijer, H.

    2017-01-01

    This work explores the stabilization of desired dynamic motion tasks involving hard impacts at non-negligible speed for humanoid robots. To this end, a so-called reference spreading hybrid control law is designed showing promising results in simulation. The simulations are performed employing a

  5. Vehicular crash data used to rank intersections by injury crash frequency and severity

    Directory of Open Access Journals (Sweden)

    Yi Liu

    2016-09-01

    Full Text Available This article contains data on research conducted in “A double standard model for allocating limited emergency medical service vehicle resources ensuring service reliability” (Liu et al., 2016 [1]. The crash counts were sorted out from comprehensive crash records of over one thousand major signalized intersections in the city of Chicago from 2004 to 2010. For each intersection, vehicular crashes were counted by crash severity levels, including fatal, injury Types A, B, and C for major, moderate, and minor injury levels, property damage only (PDO, and unknown. The crash data was further used to rank intersections by equivalent injury crash frequency. The top 200 intersections with the highest number of crash occurrences identified based on crash frequency- and severity-based scenarios are shared in this brief. The provided data would be a valuable source for research in urban traffic safety analysis and could also be utilized to examine the effectiveness of traffic safety improvement planning and programming, intersection design enhancement, incident and emergency management, and law enforcement strategies.

  6. Estimate of aircraft crash hit frequencies on to facilities at the Lawrence Livermore National Laboratory (LLNL) Site 200

    International Nuclear Information System (INIS)

    Kimura, C.Y.

    1997-01-01

    Department of Energy (DOE) nuclear facilities are required by DOE Order 5480.23, Section 8.b.(3)(k) to consider external events as initiating events to accidents within the scope of their Safety Analysis Reports (SAR). One of the external initiating events which should be considered within the scope of a SAR is an aircraft accident, i.e., an aircraft crashing into the nuclear facility with the related impact and fire leading to penetration of the facility and to the release of radioactive and/or hazardous materials. This report presents the results of an Aircraft Crash Frequency analysis performed for the Materials Management Area (MMA), and the National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory (LLNL) Site 200. The analysis estimates only the aircraft crash hit frequency on to the analyzed facilities. No initial aircraft crash hit frequency screening structural response calculations of the facilities to the aircraft impact, or consequence analysis of radioactive/hazardous materials released following the aircraft impact are performed. The method used to estimate the aircraft crash hit frequencies on to facilities at the Lawrence Livermore National Laboratory (LLNL) generally follows the procedure given by the DOE Standard 3014-96 on Aircraft Crash Analysis. However, certain adjustments were made to the DOE Standard procedure because of the site specific fight environment or because of facility specific characteristics

  7. Aircraft crash upon outer containment of nuclear power plant

    International Nuclear Information System (INIS)

    Abbas, H.; Paul, D.K.; Godbole, P.N.; Nayak, G.C.

    1996-01-01

    In this paper, analysis of an aircraft crash upon an outer containment of a nuclear power plant is presented. The effect of target yielding is considered simultaneously by calculating the reaction time in a time marching scheme. The concrete model employed is capable of predicting the cracking and yielding. The response for different cracking strains and different locations of aircraft strike for different aircraft has been studied. Critical location of aircraft strike for the containment has been investigated. The analytical procedure and the material model used are found to be capable of representing the aircraft impact response of the containment structure. (orig.)

  8. Numerical modelling of the impact of flood wave cyclicality on the stability of levees

    Directory of Open Access Journals (Sweden)

    Franczyk Anna

    2016-01-01

    Full Text Available Sensitivity analysis applied to the flooding process is discussed in the paper. The analysis was done as part of the ISMOP project devoted to elaborating and designing a complex system for embankment monitoring and threat forecasting. The analysis was performed using selected geotechnical parameters that describe embankment state. It was shown that the sensitivity analysis method is very practical for detecting places where the largest vertical displacement and pore pressure distribution are observed. The sensitivity analysis was carried out for a single flood wave numerical experiment as well as for a double successive flood wave experiment. Comparison of the results allowed us to detect the places where the biggest differences in total relative sensitivity values are observed. Plots of these differences can help to indicate the particular places within the embankment that are the most influenced by successive flood waves and should be especially examined during field experiments as part of the ISMOP project.

  9. Structural analysis of a metal spent-fuel storage cask in an aircraft crash for risk assessment

    International Nuclear Information System (INIS)

    Almomani, Belal; Lee, Sanghoon; Kang, Hyun Gook

    2016-01-01

    Highlights: • Several engine-applied loads with different locations of impact on the storage cask body were implemented. • Cask structural responses due to the influence of engine impact loadings were analyzed. • Leakage path areas from lid closure openings were numerically calculated. • Release fractions that depend on the generated seal opening areas and fuel damage ratios were estimated. - Abstract: Evaluations of the impact resistance of a dry storage cask under mechanical impact loadings resulting from a large commercial aircraft crash have become an important issue for designers and evaluators, in order to promote interim dry storage activities and to evaluate design safety margins. This study presents a method to evaluate the structural integrity of a generic metal cask subjected to various mechanical loading conditions, which represent aircraft engine impacts, on different locations of the cask body. Thirty representative impact conditions are analyzed to provide a comprehensive evaluation of cask damage response. The applied engine impact load–time functions were carefully re-derived by utilizing CRIEPI’s proposed curve through Riera’s approach for six impact velocities, and applied to five locations on a freestanding cask: lateral impacts on the lower half, center of gravity, and upper half of the cask body, corner impact on the lid closure, and vertical impact on the center of the lid closure. A nonlinear dynamic finite element analysis is performed to evaluate the dynamic response of the cask lid closure system and to calculate the lid gaps. The release fractions from the cask to the environment for each impact condition are preliminarily estimated by referring to a proposed methodology from literature. It is believed that this paper presents a systematic process to connect the mechanical analysis of a cask response at the moment of aircraft engine impact with its radiological consequence analysis.

  10. Structural analysis of a metal spent-fuel storage cask in an aircraft crash for risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Almomani, Belal, E-mail: balmomani@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Lee, Sanghoon, E-mail: shlee1222@kmu.ac.kr [Department of Mechanical and Automotive Engineering, Keimyung University, Dalgubeol-daero 1095, Dalseo-gu, Daegu (Korea, Republic of); Kang, Hyun Gook, E-mail: hyungook@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2016-11-15

    Highlights: • Several engine-applied loads with different locations of impact on the storage cask body were implemented. • Cask structural responses due to the influence of engine impact loadings were analyzed. • Leakage path areas from lid closure openings were numerically calculated. • Release fractions that depend on the generated seal opening areas and fuel damage ratios were estimated. - Abstract: Evaluations of the impact resistance of a dry storage cask under mechanical impact loadings resulting from a large commercial aircraft crash have become an important issue for designers and evaluators, in order to promote interim dry storage activities and to evaluate design safety margins. This study presents a method to evaluate the structural integrity of a generic metal cask subjected to various mechanical loading conditions, which represent aircraft engine impacts, on different locations of the cask body. Thirty representative impact conditions are analyzed to provide a comprehensive evaluation of cask damage response. The applied engine impact load–time functions were carefully re-derived by utilizing CRIEPI’s proposed curve through Riera’s approach for six impact velocities, and applied to five locations on a freestanding cask: lateral impacts on the lower half, center of gravity, and upper half of the cask body, corner impact on the lid closure, and vertical impact on the center of the lid closure. A nonlinear dynamic finite element analysis is performed to evaluate the dynamic response of the cask lid closure system and to calculate the lid gaps. The release fractions from the cask to the environment for each impact condition are preliminarily estimated by referring to a proposed methodology from literature. It is believed that this paper presents a systematic process to connect the mechanical analysis of a cask response at the moment of aircraft engine impact with its radiological consequence analysis.

  11. Barrier-relevant crash modification factors and average costs of crashes on arterial roads in Indiana.

    Science.gov (United States)

    Zou, Yaotian; Tarko, Andrew P

    2018-02-01

    The objective of this study was to develop crash modification factors (CMFs) and estimate the average crash costs applicable to a wide range of road-barrier scenarios that involved three types of road barriers (concrete barriers, W-beam guardrails, and high-tension cable barriers) to produce a suitable basis for comparing barrier-oriented design alternatives and road improvements. The intention was to perform the most comprehensive and in-depth analysis allowed by the cross-sectional method and the crash data available in Indiana. To accomplish this objective and to use the available data efficiently, the effects of barrier were estimated on the frequency of barrier-relevant (BR) crashes, the types of harmful events and their occurrence during a BR crash, and the severity of BR crash outcomes. The harmful events component added depth to the analysis by connecting the crash onset with its outcome. Further improvement of the analysis was accomplished by considering the crash outcome severity of all the individuals involved in a crash and not just drivers, utilizing hospital data, and pairing the observations with and without road barriers along same or similar road segments to better control the unobserved heterogeneity. This study confirmed that the total number of BR crashes tended to be higher where medians had installed barriers, mainly due to collisions with barriers and, in some cases, with other vehicles after redirecting vehicles back to traffic. These undesirable effects of barriers were surpassed by the positive results of reducing cross-median crashes, rollover events, and collisions with roadside hazards. The average cost of a crash (unit cost) was reduced by 50% with cable barriers installed in medians wider than 50ft. A similar effect was concluded for concrete barriers and guardrails installed in medians narrower than 50ft. The studied roadside guardrails also reduced the unit cost by 20%-30%. Median cable barriers were found to be the most effective

  12. Assimilation of radar altimeter data in numerical wave models: an impact study in two different wave climate regions

    Directory of Open Access Journals (Sweden)

    G. Emmanouil

    2007-03-01

    Full Text Available An operational assimilation system incorporating significant wave height observations in high resolution numerical wave models is studied and evaluated. In particular, altimeter satellite data provided by the European Space Agency (ESA-ENVISAT are assimilated in the wave model WAM which operates in two different wave climate areas: the Mediterranean Sea and the Indian Ocean. The first is a wind-sea dominated area while in the second, swell is the principal part of the sea state, a fact that seriously affects the performance of the assimilation scheme. A detailed study of the different impact is presented and the resulting forecasts are evaluated against available buoy and satellite observations. The corresponding results show a considerable improvement in wave forecasting for the Indian Ocean while in the Mediterranean Sea the assimilation impact is restricted to isolated areas.

  13. Preliminary Study on Evaluation of Impact Resistance Performance of Fiber Reinforced Concrete Walls

    International Nuclear Information System (INIS)

    Jin, Byeong Moo; Lee, Yun Seok; Kim, Young Jin; Jeon, Se Jin

    2012-01-01

    As the safety assessments of nuclear power plants for the hypothetical large civil aircraft crash should be made mandatory, studies on large aircraft-nuclear power plant impact analyses and assessments studies are actively in progress. For the safety assessment of nuclear power plants against large civil aircraft crash, it is practically impossible to conduct full-scale experiments. Therefore, analysis using general purpose numerical analysis program accompanied by scale model experiments and element experiments has been adopted for the safety assessment. The safety of nuclear power plants against large civil aircraft crash is able to be accomplished by enhancement of the impact resistance performance, such as increasing the wall thickness, increasing the strength of concrete and using the fiber reinforced concrete which is able to be acquired by relatively simple process of adding fibers to a concrete mix without significant change of design and construction. A research for the enhancement of impact resistance performance depending upon design parameters for fiber reinforced concrete, such as type of fibers and application rate, is in progress. In this study, before the safety assessment of nuclear power plants against large civil aircraft crash, we assess the impact resistance performance of concrete wall depending upon type of fibers and impact velocity of objects

  14. Preliminary Study on Evaluation of Impact Resistance Performance of Fiber Reinforced Concrete Walls

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Byeong Moo; Lee, Yun Seok; Kim, Young Jin [Daewoo E and C Co. Ltd., Suwon (Korea, Republic of); Jeon, Se Jin [Ajou University, Suwon (Korea, Republic of)

    2012-05-15

    As the safety assessments of nuclear power plants for the hypothetical large civil aircraft crash should be made mandatory, studies on large aircraft-nuclear power plant impact analyses and assessments studies are actively in progress. For the safety assessment of nuclear power plants against large civil aircraft crash, it is practically impossible to conduct full-scale experiments. Therefore, analysis using general purpose numerical analysis program accompanied by scale model experiments and element experiments has been adopted for the safety assessment. The safety of nuclear power plants against large civil aircraft crash is able to be accomplished by enhancement of the impact resistance performance, such as increasing the wall thickness, increasing the strength of concrete and using the fiber reinforced concrete which is able to be acquired by relatively simple process of adding fibers to a concrete mix without significant change of design and construction. A research for the enhancement of impact resistance performance depending upon design parameters for fiber reinforced concrete, such as type of fibers and application rate, is in progress. In this study, before the safety assessment of nuclear power plants against large civil aircraft crash, we assess the impact resistance performance of concrete wall depending upon type of fibers and impact velocity of objects

  15. Numerical assessment of wind turbine blade damage due to contact/impact with tower during installation

    Science.gov (United States)

    Shankar Verma, Amrit; Petter Vedvik, Nils; Gao, Zhen

    2017-12-01

    The use of floating crane vessel for installation of offshore wind turbine blades presents a great challenge in terms of its random motions and is likely to increase the probability of the blade hitting the preassembled tower during lifting operation. To evaluate the consequences of such scenarios and to determine the allowable motions or sea states for such operations, it is very important to understand the damage development in the blade due to impact. The present paper employs the application of high fidelity finite element method to investigate the damage behavior in the blade when the leading edge of the blade hits the tower. A nonlinear time domain structural analysis using ABAQUS was conducted on the DTU 10 MW reference blade model which is based on shell elements. Damage assessment along with the nature of evolution of various energies is examined and presented for two different impact velocities with modified layup stacking sequence at the contact region.

  16. Analysis of hourly crash likelihood using unbalanced panel data mixed logit model and real-time driving environmental big data.

    Science.gov (United States)

    Chen, Feng; Chen, Suren; Ma, Xiaoxiang

    2018-06-01

    Driving environment, including road surface conditions and traffic states, often changes over time and influences crash probability considerably. It becomes stretched for traditional crash frequency models developed in large temporal scales to capture the time-varying characteristics of these factors, which may cause substantial loss of critical driving environmental information on crash prediction. Crash prediction models with refined temporal data (hourly records) are developed to characterize the time-varying nature of these contributing factors. Unbalanced panel data mixed logit models are developed to analyze hourly crash likelihood of highway segments. The refined temporal driving environmental data, including road surface and traffic condition, obtained from the Road Weather Information System (RWIS), are incorporated into the models. Model estimation results indicate that the traffic speed, traffic volume, curvature and chemically wet road surface indicator are better modeled as random parameters. The estimation results of the mixed logit models based on unbalanced panel data show that there are a number of factors related to crash likelihood on I-25. Specifically, weekend indicator, November indicator, low speed limit and long remaining service life of rutting indicator are found to increase crash likelihood, while 5-am indicator and number of merging ramps per lane per mile are found to decrease crash likelihood. The study underscores and confirms the unique and significant impacts on crash imposed by the real-time weather, road surface, and traffic conditions. With the unbalanced panel data structure, the rich information from real-time driving environmental big data can be well incorporated. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

  17. Numerical analysis of impact-penetration problems for nuclear reactor safety

    International Nuclear Information System (INIS)

    Dubois, J.J.; Chedmail, J.F.; Bianchini, J.C.

    1977-01-01

    This paper discusses the finite element and finite difference analysis of two impact penetration problems, namely a fuel cask drop on a foundation slab and a missile penetration into a reinforced concrete structure. For a realistic detailed analysis, advanced techniques were required in the following areas: reinforced concrete simulation; remeshing algorithms for penetration induced distortions; boundary condition. The fuel cask drop on a concrete slab generates complex elasto plastic waves which propagate towards the pool where tensile cracks might appear. The problem is analysed in two steps: calculation of the energy absorbed locally around the impacted area; calculation of the three dimensional wave propagation towards the pool. For the analysis of missile penetration problems, two examples are shown: a 3000 kg missile with a velocity of 132 m/s penetrates a 1.2 m thick concrete wall (PAM-GDYNS) and a 3600 kg missile with a velocity of 90 m/s (F.D. Program HEMP-ESI) penetrates a wall at a floor level. For the second case, the computed impact-penetration mechanism is

  18. Impact of flow routing on catchment area calculations, slope estimates, and numerical simulations of landscape development

    Science.gov (United States)

    Shelef, Eitan; Hilley, George E.

    2013-12-01

    Flow routing across real or modeled topography determines the modeled discharge and wetness index and thus plays a central role in predicting surface lowering rate, runoff generation, likelihood of slope failure, and transition from hillslope to channel forming processes. In this contribution, we compare commonly used flow-routing rules as well as a new routing rule, to commonly used benchmarks. We also compare results for different routing rules using Airborne Laser Swath Mapping (ALSM) topography to explore the impact of different flow-routing schemes on inferring the generation of saturation overland flow and the transition between hillslope to channel forming processes, as well as on location of saturation overland flow. Finally, we examined the impact of flow-routing and slope-calculation rules on modeled topography produced by Geomorphic Transport Law (GTL)-based simulations. We found that different rules produce substantive differences in the structure of the modeled topography and flow patterns over ALSM data. Our results highlight the impact of flow-routing and slope-calculation rules on modeled topography, as well as on calculated geomorphic metrics across real landscapes. As such, studies that use a variety of routing rules to analyze and simulate topography are necessary to determine those aspects that most strongly depend on a chosen routing rule.

  19. Effect of Mesoscale and Multiscale Modeling on the Performance of Kevlar Woven Fabric Subjected to Ballistic Impact: A Numerical Study

    Science.gov (United States)

    Jia, Xin; Huang, Zhengxiang; Zu, Xudong; Gu, Xiaohui; Xiao, Qiangqiang

    2013-12-01

    In this study, an optimal finite element model of Kevlar woven fabric that is more computational efficient compared with existing models was developed to simulate ballistic impact onto fabric. Kevlar woven fabric was modeled to yarn level architecture by using the hybrid elements analysis (HEA), which uses solid elements in modeling the yarns at the impact region and uses shell elements in modeling the yarns away from the impact region. Three HEA configurations were constructed, in which the solid element region was set as about one, two, and three times that of the projectile's diameter with impact velocities of 30 m/s (non-perforation case) and 200 m/s (perforation case) to determine the optimal ratio between the solid element region and the shell element region. To further reduce computational time and to maintain the necessary accuracy, three multiscale models were presented also. These multiscale models combine the local region with the yarn level architecture by using the HEA approach and the global region with homogenous level architecture. The effect of the varying ratios of the local and global area on the ballistic performance of fabric was discussed. The deformation and damage mechanisms of fabric were analyzed and compared among numerical models. Simulation results indicate that the multiscale model based on HEA accurately reproduces the baseline results and obviously decreases computational time.

  20. Cross-country VFR crashes: pilot and contextual factors.

    Science.gov (United States)

    O'Hare, David; Owen, Douglas

    2002-04-01

    General Aviation (GA) cross-country crashes, particularly those involving weather, continue to be a major source of fatalities, with a fatality rate more than four times greater than for GA crashes in general. There has been much speculation and little solid evidence on the causes of these crashes. We have designed a program of laboratory and database research into the causes of cross-country weather-related crashes including an analysis of air crashes in New Zealand between 1988 and 2000. There were 1308 reported occurrences in this period. We examined in detail 77 crashes where it could be determined that the aircraft was on a cross-country flight. In our first analysis we compared the characteristics of crashes that occurred in response to externally driven failures with crashes where the aircraft continued to be flown at the pilot's discretion up until the point of the crash. Clear differences were found for visibility, altitude, crash severity, and for several pilot characteristics. These differences are highly consistent with those found for previous research on pilot characteristics and crash involvement. In the second analysis we made comparisons between the weather-related and nonweather-related crashes in the discretionary control group and between subcategories of weather-related crashes. These data show that weather-related crashes occur further into the flight and closer to the planned destination than other kinds of cross-country crashes in GA. Pilots involved in these crashes are younger and have more recent flight time than pilots involved in other crashes. Their increased involvement cannot be explained simply by exposure (flight-time) but must be due to other factors.

  1. A test-based method for the assessment of pre-crash warning and braking systems.

    Science.gov (United States)

    Bálint, András; Fagerlind, Helen; Kullgren, Anders

    2013-10-01

    In this paper, a test-based assessment method for pre-crash warning and braking systems is presented where the effectiveness of a system is measured by its ability to reduce the number of injuries of a given type or severity in car-to-car rear-end collisions. Injuries with whiplash symptoms lasting longer than 1 month and MAIS2+ injuries in both vehicles involved in the crash are considered in the assessment. The injury reduction resulting from the impact speed reduction due to a pre-crash system is estimated using a method which has its roots in the dose-response model. Human-machine interaction is also taken into account in the assessment. The results reflect the self-protection as well as the partner-protection performance of a pre-crash system in the striking vehicle in rear-end collisions and enable a comparison between two or more systems. It is also shown how the method may be used to assess the importance of warning as part of a pre-crash system. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. The road traffic crashes as a neglected public health concern; an observational study from Iranian population.

    Science.gov (United States)

    Bakhtiyari, Mahmood; Delpisheh, Ali; Monfared, Ayad Bahadori; Kazemi-Galougahi, Mohammad Hassan; Mehmandar, Mohammad Reza; Riahi, Mohammad; Salehi, Masoud; Mansournia, Mohammad Ali

    2015-01-01

    Traffic crashes are multifactorial events caused by human factors, technical issues, and environmental conditions. The present study aimed to determine the role of human factors in traffic crashes in Iran using the proportional odds regression model. The database of all traffic crashes in Iran in 2010 (n = 592, 168) registered through the "COM.114" police forms was investigated. Human risk factors leading to traffic crashes were determined and the odds ratio (OR) of each risk factor was estimated using an ordinal regression model and adjusted for potential confounding factors such as age, gender, and lighting status within and outside of cities. The drivers' mean age ± standard deviation was 34.1 ± 14.0 years. The most prevalent risk factors leading to death within cities were disregarding traffic rules and regulations (45%), driver rushing (31%), and alcohol consumption (12.3%). Using the proportional odds regression model, alcohol consumption was the most significant human risk factor in traffic crashes within cities (OR = 6.5, 95% confidence interval [CI], 4.88-8.65) and outside of cities (OR = 1.73, 95% CI, 1.22-3.29). Public health strategies and preventive policies should be focused on more common human risk factors such as disregarding traffic rules and regulations, drivers' rushing, and alcohol consumption due to their greater population attributable fraction and more intuitive impacts on society.

  3. Recession depression: mental health effects of the 2008 stock market crash.

    Science.gov (United States)

    McInerney, Melissa; Mellor, Jennifer M; Nicholas, Lauren Hersch

    2013-12-01

    Do sudden, large wealth losses affect mental health? We use exogenous variation in the interview dates of the 2008 Health and Retirement Study to assess the impact of large wealth losses on mental health among older U.S. adults. We compare cross-wave changes in wealth and mental health for respondents interviewed before and after the October 2008 stock market crash. We find that the crash reduced wealth and increased feelings of depression and use of antidepressant drugs, and that these effects were largest among respondents with high levels of stock holdings prior to the crash. These results suggest that sudden wealth losses cause immediate declines in subjective measures of mental health. However, we find no evidence that wealth losses lead to increases in clinically-validated measures of depressive symptoms or indicators of depression. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Safety Performance Evaluations for the Vehicle Based Movable Barriers Using Full Scale Crash Tests

    Directory of Open Access Journals (Sweden)

    Jin Minsoo

    2017-01-01

    Full Text Available The present study aims to develop a prototype of large-size movable barriers to protect roadside workers from incoming vehicles to the road work area with the following functions: maximization of work space in the right and left directions, convenient mobility, and minimization of impact without modification of the inside of movable barriers into traffic lanes and perform safety performance assessment on passengers through full scale crash tests. The large movable barrier was divided into folder type and telescope type and the development stage was now at the prototype phase. A full scale crash test was conducted prior to certification test at a level of 90%. The full scale crash test result showed that both types of folder type movable barrier and telescope type movable barrier satisfied the standard of the passenger safety performance evaluation at a level of 90%.

  5. Recession Depression: Mental Health Effects of the 2008 Stock Market Crash*

    Science.gov (United States)

    McInerney, Melissa; Mellor, Jennifer M.; Nicholas, Lauren Hersch

    2013-01-01

    Do sudden, large wealth losses affect mental health? We use exogenous variation in the interview dates of the 2008 Health and Retirement Study to assess the impact of large wealth losses on mental health among older U.S. adults. We compare cross-wave changes in wealth and mental health for respondents interviewed before and after the October 2008 stock market crash. We find that the crash reduced wealth and increased feelings of depression and use of antidepressant drugs, and that these effects were largest among respondents with high levels of stock holdings prior to the crash. These results suggest that sudden wealth losses cause immediate declines in subjective measures of mental health. However, we find no evidence that wealth losses lead to increases in clinically-validated measures of depressive symptoms or indicators of depression. PMID:24113241

  6. Control oriented system analysis and feedback control of a numerical sawtooth instability model

    NARCIS (Netherlands)

    Witvoet, G.; Westerhof, E.; Steinbuch, M.; Baar, de M.R.; Doelman, N.J.; Prater, R.

    2010-01-01

    A combined Porcelli-Kadomtsev numerical sawtooth instability model is analyzed using control oriented identification techniques. The resulting discrete time linear models describe the system’s behavior from crash to crash and is used in the design of a simple discrete time feedback controller, which

  7. Numerical modelling of physiological and ecological impacts of ocean acidification on coccolithophores

    Science.gov (United States)

    Furukawa, Makoto; Sato, Toru; Suzuki, Yoshimi; Casareto, Beatriz E.; Hirabayashi, Shinichiro

    2018-06-01

    Ocean surface acidification due to increasing atmospheric CO2 concentration is currently attracting much attention. Coccolithophores distribute widely across the world's oceans and represent a carbon sink containing about 100 million tonnes of carbon. For this reason, there is concern about dissolution of their shells, which are made of calcium carbonate, due to decreasing pH. In this study, intracellular calcification, photosynthesis, and mass transport through biomembranes of Emiliania huxleyi were modelled numerically for understanding biological response in calcifying organisms. Unknown parameters were optimised by a generic algorithm to match existing experimental results. The model showed that the production of calcium carbonate rather than its dissolution is promoted under an acidified environment. Calcite remains at saturation levels in a coccolith even when it is below saturation levels in the external seawater. Furthermore, a coccolith can dissolve even in water where calcite saturation exceeds 1, because the saturation may be below the threshold level locally around the cell membrane. The present model also showed that the different calcification rates of E. huxleyi with respect to rising CO2 concentrations reported in the literature are due to differences in experimental conditions; in particular, how the CO2 concentration is matched. Lastly, the model was able to reproduce differences in calcification rates among coccolithophore species. The above biochemical-kinetic model was then incorporated into an ecosystem model, and the behaviour of coccolithophores in the ecosystem and the influence of increases in CO2 concentration on water quality were simulated and validated by comparison with existing experimental results. The model also suggests that increased CO2 concentration could lead to an increase in the biomass ratio of coccolithophores to diatoms at high CO2 concentrations, particularly in oligotrophic environments, and to a consequent decrease in

  8. Observational and numerical evidence for ocean frontogenesis inducing submesoscale processes and impacting biochemistry

    Science.gov (United States)

    Claret, M.; Ruiz, S.; Pascual, A.; Olita, A.; Mahadevan, A.; Tovar, A.; Troupin, C.; Tintore, J.; Capet, A.

    2016-02-01

    We present the results of ALBOREX, a multi-platform and multi-disciplinary experiment completed in May 2014 as a part of PERSEUS EU funded project. This unique process-oriented experiment in the eastern Alboran Sea (Western Mediterranean) examined mesoscale and submesoscale dynamics at an intense front. The field campaign, conducted during 8 days, included 25 drifters, 2 gliders, 3 Argo floats and one ship (66 CTDs and 500 biochemical samples). The drifters followed coherently an anticyclonic gyre. ADCP data showed consistent patterns with currents up to 1 m/s in the southern part of the domain and Rossby numbers up to 1.5 suggesting significant ageostrophic motion. We show observational evidence for mesoscale frontogenesis produced by the confluence of (fresh) Atlantic Water and the resident (more saline) Mediterranean Water. This confluence resulted in lateral density gradients of the order of 1 kg/m3 in 10 km and associated vertical velocities of about ±20 m/day, diagnosed using the QG Omega equation. However, the vertical velocity is likely underestimated due to unresolved submesoscale processes (<10 km), which are induced by intense mesoscale frontogenesis. In order to assess the role of these submesoscale processes in the frontal vertical transport, a high-resolution Process Ocean Model Study is initialized with hydrographic data (0.5-1 km resolution) from underwater gliders. Numerical results show that observed lateral buoyancy gradients are large enough to trigger submesoscale mixed layer instabilities. The coupling between mesoscale and submesoscale phenomena can explain remarkable subduction events of chlorophyll and oxygen captured by ocean gliders, as well as local increases of primary production.

  9. Impact of biogenic terpene emissions from Brassica napus on tropospheric ozone over Saxony (Germany): numerical investigation.

    Science.gov (United States)

    Renner, Eberhard; Münzenberg, Annette

    2003-01-01

    The role of biogenic emissions in tropospheric ozone production is currently under discussion and major aspects are not well understood yet. This study aims towards the estimation of the influence of biogenic emissions on tropospheric ozone concentrations over Saxony in general and of biogenic emissions from brassica napus in special. MODELLING TOOLS: The studies are performed by utilizing a coupled numerical modelling system consisting of the meteorological model METRAS and the chemistry transport model MUSCAT. For the chemical part, the Euro-RADM algorithm is used. EMISSIONS: Anthropogenic and biogenic emissions are taken into account. The anthropogenic emissions are introduced by an emission inventory. Biogenic emissions, VOC and NO, are calculated within the chemical transport model MUSCAT at each time step and in each grid cell depending on land use type and on the temperature. The emissions of hydrocarbons from forest areas as well as biogenic NO especially from agricultural grounds are considered. Also terpene emissions from brassica napus fields are estimated. SIMULATION SETUP AND METEOROLOGICAL CONDITIONS: The simulations were performed over an area with an extension of 160 x 140 km2 which covers the main parts of Saxony and neighboring areas of Brandenburg, Sachsen-Anhalt and Thuringia. Summer smog with high ozone concentrations can be expected during high pressure conditions on hot summer days. Typical meteorological conditions for such cases were introduced in an conceptual way. It is estimated that biogenic emissions change tropospheric ozone concentrations in a noticeable way (up to 15% to 20%) and, therefore, should not be neglected in studies about tropospheric ozone. Emissions from brassica napus do have a moderate potential to enhance tropospheric ozone concentrations, but emissions are still under consideration and, therefore, results vary to a high degree. Summing up, the effect of brassica napus terpene emissions on ozone concentrations is

  10. Numerical study on the impact of ground heating and ambient wind speed on flow fields in street canyons

    Science.gov (United States)

    Li, Lei; Yang, Lin; Zhang, Li-Jie; Jiang, Yin

    2012-11-01

    The impact of ground heating on flow fields in street canyons under different ambient wind speed conditions was studied based on numerical methods. A series of numerical tests were performed, and three factors including height-to-width (H/W) ratio, ambient wind speed and ground heating intensity were taken into account. Three types of street canyon with H/W ratios of 0.5, 1.0 and 2.0, respectively, were used in the simulation and seven speed values ranging from 0.0 to 3.0 m s-1 were set for the ambient wind speed. The ground heating intensity, which was defined as the difference between the ground temperature and air temperature, ranged from 10 to 40 K with an increase of 10 K in the tests. The results showed that under calm conditions, ground heating could induce circulation with a wind speed of around 1.0 m s-1, which is enough to disperse pollutants in a street canyon. It was also found that an ambient wind speed threshold may exist for street canyons with a fixed H/W ratio. When ambient wind speed was lower than the threshold identified in this study, the impact of the thermal effect on the flow field was obvious, and there existed a multi-vortex flow pattern in the street canyon. When the ambient wind speed was higher than the threshold, the circulation pattern was basically determined by dynamic effects. The tests on the impact of heating intensity showed that a higher ground heating intensity could strengthen the vortical flow within the street canyon, which would help improve pollutant diffusion capability in street canyons.

  11. Impact of cloud parameterization on the numerical simulation of a super cyclone

    Energy Technology Data Exchange (ETDEWEB)

    Deshpande, M.S.; Pattnaik, S.; Salvekar, P.S. [Indian Institute of Tropical Meteorology, Pune (India)

    2012-07-01

    This study examines the role of parameterization of convection and explicit moisture processes on the simulated track, intensity and inner core structure of Orissa super cyclone (1999) in Bay of Bengal (north Indian Ocean). Sensitivity experiments are carried out to examine the impact of cumulus parameterization schemes (CPS) using MM5 model (Version 3.7) in a two-way nested domain (D1 and D2) configuration at horizontal resolutions (45-15 km). Three different cumulus parameterization schemes, namely Grell (Gr), Betts-Miller (BM) and updated Kain Fritsch (KF2), are tested. It is noted that track and intensity both are very sensitive to CPS and comparatively, KF2 predicts them reasonably well. Particularly, the rapid intensification phase of the super cyclone is best simulated by KF2 compared to other CPS. To examine the effect of the cumulus parameterization scheme at high resolution (5 km), the three-domain configuration (45-15-5 km resolution) is utilized. Based on initial results, KF2 scheme is used for both the domains (D1 and D2). Two experiments are conducted: one in which KF2 is used as CPS and another in which no CPS is used in the third domain. The intensity is well predicted when no CPS is used in the innermost domain. The sensitivity experiments are also carried out to examine the impact from microphysics parameterization schemes (MPS). Four cloud microphysics parameterization schemes, namely mixed phase (MP), Goddard microphysics with Graupel (GG), Reisner Graupel (RG) and Schultz (Sc), are tested in these experiments. It is noted that the tropical cyclone tracks and intensity variation have considerable sensitivity to the varying cloud microphysical parameterization schemes. The MPS of MP and Sc could very well capture the rapid intensification phase. The final intensity is well predicted by MP, which is overestimated by Sc. The MPS of GG and RG underestimates the intensity. (orig.)

  12. Examination of factors associated in motorcycle crashes in work zones.

    Science.gov (United States)

    2013-01-01

    This paper analyzes the factors associated with motorcycle crashes in work zones. This analysis was completed : through the collection and inspection of three types of data: 1) practices used throughout the country on this topic, : 2) crash reports a...

  13. Financial Services Advertising before and after the Crash of 1987.

    Science.gov (United States)

    Everett, Stephen E.

    1988-01-01

    Examines institutional changes in advertising before and after the stock market "crash" of 1987 as represented in the "Wall Street Journal." Finds that financial institutions increased the frequency and size of ads after the crash. (RS)

  14. School start times and teenage driver motor vehicle crashes.

    Science.gov (United States)

    2015-12-01

    There is substantial evidence that lack of sleep is a significant factor in motor vehicle crashes experienced by teenage drivers. This report examines the hypothesis that a later high school start time may reduce crash rates by reducing the interfere...

  15. Linear regression crash prediction models : issues and proposed solutions.

    Science.gov (United States)

    2010-05-01

    The paper develops a linear regression model approach that can be applied to : crash data to predict vehicle crashes. The proposed approach involves novice data aggregation : to satisfy linear regression assumptions; namely error structure normality ...

  16. A Study of Transport Airplane Crash-Resistant Fuel Systems

    National Research Council Canada - National Science Library

    Robertson, S

    2002-01-01

    ...), of transport airplane crash-resistant fuel system (CRFS). The report covers the historical studies related to aircraft crash fires and fuel containment concepts undertaken by the FAA, NASA, and the U.S...

  17. Risk factors associated with high potential for serious crashes.

    Science.gov (United States)

    2015-09-01

    Crashes are random events and low traffic volumes therefore dont always make crash hot-spot : identification possible. This project has used extensive data collection and analysis for a large sample : of Oregons low volume roads to develop a ri...

  18. Taxonomy of Older Driver Behaviors and Crash Risk : Appendix C

    Science.gov (United States)

    2012-02-01

    This projects objectives were to identify risky behaviors, driving habits, and exposure patterns that have been shown to increase the likelihood of crash involvement among older drivers; and to classify these crash-contributing factors according t...

  19. Evaluation of safety ratings of roads based on frontal crashes with known crash pulse and injury outcome.

    Science.gov (United States)

    Stigson, H

    2009-06-01

    The objective in this study, using data from crashed cars fitted with on-board crash pulse recorders, was to present differences in average crash severity, distribution of crash severity, and injury outcomes, based on an independent safety rating of roads, also taking road type and speed limit into consideration. Furthermore, the objective was to evaluate differences in injury risk, based on the distribution of crash severity. The investigation included both frontal two-vehicle crashes and single-vehicle crashes with known injury outcome. In total, 209 real-world crashes involving cars fitted with crash pulse recorders were included. For all crashes, average mean acceleration and change of velocity of the vehicle acceleration pulse were measured and calculated. All crash spots were classified according to an independent road safety rating program (European Road Assessment Programme Road Protection Score), where the safety quality of roads is rated in relation to posted speed limits. The crash severity and injury outcome in crashes that occurred on roads with good safety ratings were compared with crashes on roads with poor safety ratings. The data were also divided into subcategories according to posted speed limit and road type, to evaluate whether there was a difference in crash severity and injury outcome within the categories. In total, crash severity was statistically significantly lower in crashes occurring on roads with good safety ratings than in crashes occurring on roads with poor safety ratings. It was found that crash severity and injury risk were lower on roads with good safety ratings with a speed limit of above 90 km/h compared with roads with poor safety ratings, irrespective of speed limit. On the other hand, crash severity was higher on roads with good safety ratings with speed limit of 70 km/h than on roads with poor safety ratings with the same speed limit. Though it was found that a higher speed limit resulted in higher crash severity on roads

  20. Pre-crash scenarios at road junctions: A clustering method for car crash data.

    Science.gov (United States)

    Nitsche, Philippe; Thomas, Pete; Stuetz, Rainer; Welsh, Ruth

    2017-10-01

    Given the recent advancements in autonomous driving functions, one of the main challenges is safe and efficient operation in complex traffic situations such as road junctions. There is a need for comprehensive testing, either in virtual simulation environments or on real-world test tracks. This paper presents a novel data analysis method including the preparation, analysis and visualization of car crash data, to identify the critical pre-crash scenarios at T- and four-legged junctions as a basis for testing the safety of automated driving systems. The presented method employs k-medoids to cluster historical junction crash data into distinct partitions and then applies the association rules algorithm to each cluster to specify the driving scenarios in more detail. The dataset used consists of 1056 junction crashes in the UK, which were exported from the in-depth "On-the-Spot" database. The study resulted in thirteen crash clusters for T-junctions, and six crash clusters for crossroads. Association rules revealed common crash characteristics, which were the basis for the scenario descriptions. The results support existing findings on road junction accidents and provide benchmark situations for safety performance tests in order to reduce the possible number parameter combinations. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Bubbles, Post-Crash Dynamics, and the Housing Market

    OpenAIRE

    Crocker H. Liu; Adam Nowak; Stuart Rosenthal

    2014-01-01

    This paper documents and explains previously unrecognized post-crash dynamics following the collapse of a housing bubble. A simple model predicts that speculative developers ensure stable pre-crash relative prices between small and large homes while their post-crash exit allows small-home relative values to fall. Evidence from Phoenix supports the model. Although home prices doubled 2004-2006, relative prices of small-to-large homes remained nearly constant but then plummeted post-crash. As s...

  2. Gasoline Prices and Their Relationship to Drunk-Driving Crashes

    OpenAIRE

    Guangqing Chi; Xuan Zhou; Timothy McClure; Paul Gilbert; Arthur Cosby; Li Zhang; Angela Robertson; David Levinson

    2010-01-01

    This study investigates the relationship between changing gasoline prices and drunk-driving crashes. Specifically, we examine the effects of gasoline prices on drunk-driving crashes in Mississippi by age, gender, and race from 2004Ð2008, a period experiencing great fluctuation in gasoline prices. An exploratory visualization by graphs shows that higher gasoline prices are generally associated with fewer drunk-driving crashes. Higher gasoline prices depress drunk- driving crashes among younger...

  3. The Impact of Microstructure Geometry on the Mass Transport in Artificial Pores: A Numerical Approach

    Directory of Open Access Journals (Sweden)

    Matthias Galinsky

    2014-01-01

    Full Text Available The microstructure of porous materials used in heterogeneous catalysis determines the mass transport inside networks, which may vary over many length scales. The theoretical prediction of mass transport phenomena in porous materials, however, is incomplete and is still not completely understood. Therefore, experimental data for every specific porous system is needed. One possible experimental technique for characterizing the mass transport in such pore networks is pulse experiments. The general evaluation of experimental outcomes of these techniques follows the solution of Fick’s second law where an integral and effective diffusion coefficient is recognized. However, a detailed local understanding of diffusion and sorption processes remains a challenge. As there is lack of proved models covering different length scales, existing classical concepts need to be evaluated with respect to their ability to reflect local geometries on the nanometer level. In this study, DSMC (Direct Simulation Monte Carlo models were used to investigate the impact of pore microstructures on the diffusion behaviour of gases. It can be understood as a virtual pulse experiment within a single pore or a combination of different pore geometries.

  4. A numerical investigation of the impact of surface topology on laminar boundary layers

    Science.gov (United States)

    Beratlis, Nikolaos; Squires, Kyle; Balaras, Elias

    2015-11-01

    Surface topology, such as dimples or trip wires, has been utilized in the past for passive separation control over bluff bodies. The majority of the work, however, has focused on the indirect effects on the drag and lift forces, while the details of the impact on the boundary layer evolution are not well understood. Here we report a series of DNS of flow over a single row of spherical and hexagonal dimples, as well as, circular grooves. The Reynolds number and the thickness of the incoming laminar boundary layer is carefully controlled. In all cases transition to turbulence downstream of the elements comes with reorientation of the spanwise vorticity into hairpin like vortices. Although qualitatively the transition mechanism amongst different dimples and grooves is similar, important quantitative differences exist: two-dimensional geometries such as the groove, are more stable than three-dimensional geometries. In addition, it was found that the cavity geometry controls the initial thickness of the boundary layer and practically results in a shift of the virtual origin of the turbulent boundary layer. Important differences in the momentum transport downstream of the dimples exist, but in all cases the boundary layer evolves in a self-similar manner.

  5. One-dimensional numerical modeling of Blue Jet and its impact on stratospheric chemistry

    Science.gov (United States)

    Duruisseau, F.; Thiéblemont, R.; Huret, N.

    2011-12-01

    In the stratosphere the ozone layer is very sensitive to the NOx abundance. The ionisation of N2 and O2 molecules by TLE's (Transient Luminous Events) is a source of NOx which is currently not well quantified and could act as a loss of ozone. In this study a one dimensional explicit parameterization of a Blue-Jet propagation based on that proposed by Raizer et al. (2006 and 2007) has been developed. This parameterization considers Blue-Jet as a streamer initiated by a bidirectional leader discharge, emerging from the anvil and sustained by moderate cloud charge. The streamer growth varies with the electrical field induced by initial cloud charge and the initial altitude. This electrical parameterization and the chemical mechanisms associated with the discharge have been implemented into a detailed chemical model of stratospheric ozone including evolution of nitrogen, chlorine and bromine species. We will present several tests performed to validate the electrical code and evaluate the propagation velocity and the maximum altitude attains by the blue jet as a function of electrical parameters. The results obtained giving the spatiotemporal evolution of the electron density are then used to initiate the specific chemistry associated with the Blue Jet. Preliminary results on the impact of such discharge on the ozone content and the whole stratospheric system will be presented.

  6. Conscientious personality and young drivers’ crash risk

    Science.gov (United States)

    Ehsani, Johnathon P.; Li, Kaigang; Simons-Morton, Bruce; Tree-McGrath, Cheyenne Fox; Perlus, Jessamyn; O’Brien, Fearghal; Klauer, Sheila G.

    2015-01-01

    Introduction Personality characteristics are associated with many risk behaviors. However, the relationship between personality traits, risky driving behavior, and crash risk is poorly understood. The purpose of this study was to examine the association between personality, risky driving behavior and crashes and near-crashes, using naturalistic driving research methods. Method Participants’ driving exposure, kinematic risky driving (KRD), high-risk secondary task engagement, and the frequency of crashes and near-crashes (CNC) were assessed over the first 18 months of licensure using naturalistic driving methods. A personality survey (NEO-Five Factor Inventory) was administered at baseline. The association between personality characteristics, KRD rate, secondary task engagement rate and CNC rate was estimated using a linear regression model. Mediation analysis was conducted to examine if participants’ KRD rate or secondary task engagement rate mediated the relationship between personality and CNC. Data were collected as part of the Naturalistic Teen Driving Study. Results Conscientiousness was marginally negatively associated with CNC (path c = −0.034, p = .09) and both potential mediators KRD (path a = −0.040, p = .09) and secondary task engagement while driving (path a = −0.053, p = .03). KRD, but not secondary task engagement, was found to mediate (path b = 0.376, p = .02) the relationship between conscientiousness and CNC (path c’ = −0.025, p = .20). Conclusions Using objective measures of driving behavior and a widely used personality construct, these findings present a causal pathway through which personality and risky driving are associated with CNC. Specifically, more conscientious teenage drivers engaged in fewer risky driving maneuvers, suffered fewer CNC. Practical Applications Part of the variability in crash-risk observed among newly licensed teenage drivers can be explained by personality. Parents and driving instructors may take teenage

  7. Conscientious personality and young drivers' crash risk.

    Science.gov (United States)

    Ehsani, Johnathon P; Li, Kaigang; Simons-Morton, Bruce G; Fox Tree-McGrath, Cheyenne; Perlus, Jessamyn G; O'Brien, Fearghal; Klauer, Sheila G

    2015-09-01

    Personality characteristics are associated with many risk behaviors. However, the relationship between personality traits, risky driving behavior, and crash risk is poorly understood. The purpose of this study was to examine the association between personality, risky driving behavior, and crashes and near-crashes, using naturalistic driving research methods. Participants' driving exposure, kinematic risky driving (KRD), high-risk secondary task engagement, and the frequency of crashes and near-crashes (CNC) were assessed over the first 18months of licensure using naturalistic driving methods. A personality survey (NEO-Five Factor Inventory) was administered at baseline. The association between personality characteristics, KRD rate, secondary task engagement rate, and CNC rate was estimated using a linear regression model. Mediation analysis was conducted to examine if participants' KRD rate or secondary task engagement rate mediated the relationship between personality and CNC. Data were collected as part of the Naturalistic Teen Driving Study. Conscientiousness was marginally negatively associated with CNC (path c=-0.034, p=.09) and both potential mediators KRD (path a=-0.040, p=.09) and secondary task engagement while driving (path a=-0.053, p=.03). KRD, but not secondary task engagement, was found to mediate (path b=0.376, p=.02) the relationship between conscientiousness and CNC (path c'=-0.025, p=.20). Using objective measures of driving behavior and a widely used personality construct, these findings present a causal pathway through which personality and risky driving are associated with CNC. Specifically, more conscientious teenage drivers engaged in fewer risky driving maneuvers, and suffered fewer CNC. Part of the variability in crash risk observed among newly licensed teenage drivers can be explained by personality. Parents and driving instructors may take teenage drivers' personality into account when providing guidance, and establishing norms and

  8. The combined benefits of motorcycle antilock braking systems (ABS) in preventing crashes and reducing crash severity.

    Science.gov (United States)

    Rizzi, Matteo; Kullgren, Anders; Tingvall, Claes

    2016-01-01

    Several studies have reported the benefits of motorcycle antilock braking systems (ABS) in reducing injury crashes, due to improved stability and braking performance. Both aspects may prevent crashes but may also reduce the crash severity when a collision occurs. However, it is still unknown to what extent the reductions in injury crashes with ABS may be due to a combination of these mechanisms. Swedish hospital and police reports (2003-2012) were used. The risk for permanent medical impairment (RPMI) was calculated, showing the risk of at least 1 or 10% permanent medical impairment. In total, 165 crashes involving ABS-equipped motorcycles were compared with 500 crashes with similar motorcycles without ABS. The analysis was performed in 3 steps. First, the reduction in emergency care visits with ABS was calculated using an induced exposure approach. Secondly, the injury mitigating effects of ABS were investigated. The mean RPMI 1+ and RPMI 10+ were analyzed for different crash types. The distributions of impairing injuries (PMI 1+) and severely impairing injuries (PMI 10+) were also analyzed. In the third step, the total reduction of PMI 1+ and PMI 10+ injured motorcyclists was calculated by combining the reductions found in the previous steps. An additional analysis of combined braking systems (CBS) together with ABS was also performed. The results showed that emergency care visits were reduced by 47% with ABS. In the second step, it was found that the mean RPMI 1+ and RPMI 10+ with ABS were 15 and 37% lower, respectively. Finally, the third step showed that the total reductions in terms of crash avoidance and mitigation of PMI 1+ and PMI 10+ injured motorcyclists with ABS were 67 and 55%, respectively. However, PMI 1+ and PMI 10+ leg injuries were not reduced by ABS to the same extent. Indications were found suggesting that the benefits of ABS together with CBS may be greater than ABS alone. This article indicated that motorcycle ABS reduced impairing injuries

  9. Pre-crash system validation with PRESCAN and VEHIL

    NARCIS (Netherlands)

    Gietelink, O.J.; Verburg, D.J.; Labibes, K.; Oostendorp, A.F.

    2004-01-01

    This paper presents the tools for design and validation of Pre-Crash Systems: the software tool PRE-crash SCenario ANalyzer (PRESCAN) and the VEhicle-Hardware-In-the-Loop (VEHIL) facility. PRESCAN allows to investigate a pre-crash scenario in simulation. This scenario can then be compared with tests

  10. Analysis of traffic crash data in Kentucky : 2004-2008.

    Science.gov (United States)

    2009-09-01

    The report documents an analysis of traffic crash data in Kentucky for the years of 2004 through 2008. A primary objective of this study was to determine average crash statistics for Kentucky highways. Average and critical numbers and rates of crashe...

  11. Numerical simulations and experimental measurements of steel and ice impacts on concrete for acoustic interrogation of delaminations in bridge decks

    Energy Technology Data Exchange (ETDEWEB)

    Mazzeo, Brian A.; Patil, Anjali N.; Klis, Jeffrey M. [Brigham Young University, Department of Electrical and Computer Engineering, Provo, Utah, 84602 (United States); Hurd, Randy C.; Truscott, Tadd T. [Brigham Young University, Department of Mechanical Engineering, Provo, Utah, 84602 (United States); Guthrie, W. Spencer [Brigham Young University, Department of Civil and Environmental Engineering, Provo, Utah, 84602 (United States)

    2014-02-18

    Delaminations in bridge decks typically result from corrosion of the top mat of reinforcing steel, which leads to a localized separation of the concrete cover from the underlying concrete. Because delaminations cannot be detected using visual inspection, rapid, large-area interrogation methods are desired to characterize bridge decks without disruption to traffic, without the subjectivity inherent in existing methods, and with increased inspector safety. To this end, disposable impactors such as water droplets or ice chips can be dropped using automatic dispensers onto concrete surfaces to excite mechanical vibrations while acoustic responses can be recorded using air-coupled microphones. In this work, numerical simulations are used to characterize the flexural response of a model concrete bridge deck subject to both steel and ice impactors, and the results are compared with similar experiments performed in the laboratory on a partially delaminated concrete bridge deck slab. The simulations offer greater understanding of the kinetics of impacts and the responses of materials.

  12. A modified compressible smoothed particle hydrodynamics method and its application on the numerical simulation of low and high velocity impacts

    International Nuclear Information System (INIS)

    Amanifard, N.; Haghighat Namini, V.

    2012-01-01

    In this study a Modified Compressible Smoothed Particle Hydrodynamics method is introduced which is applicable in problems involving shock wave structures and elastic-plastic deformations of solids. As a matter of fact, algorithm of the method is based on an approach which descritizes the momentum equation into three parts and solves each part separately and calculates their effects on the velocity field and displacement of particles. The most exclusive feature of the method is exactly removing artificial viscosity of the formulations and representing good compatibility with other reasonable numerical methods without any rigorous numerical fractures or tensile instabilities while Modified Compressible Smoothed Particle Hydrodynamics does not use any extra modifications. Two types of problems involving elastic-plastic deformations and shock waves are presented here to demonstrate the capability of Modified Compressible Smoothed Particle Hydrodynamics in simulation of such problems and its ability to capture shock. The problems that are proposed here are low and high velocity impacts between aluminum projectiles and semi infinite aluminum beams. Elastic-perfectly plastic model is chosen for constitutive model of the aluminum and the results of simulations are compared with other reasonable studies in these cases.

  13. Numerical analysis of the impact of permeability on trailing-edge noise

    Science.gov (United States)

    Koh, Seong Ryong; Meinke, Matthias; Schröder, Wolfgang

    2018-05-01

    The impact of porous surfaces on the near-wall turbulent structures and the generated trailing-edge noise is analyzed for several trailing-edge shapes of finite thickness using a high resolution large-eddy simulation (LES)/computational aeroacoustics (CAA) method. The porous surface of the trailing edge is defined by the porosity and the viscous permeability determined by the solution of a turbulent flat plate boundary layer at a Reynolds number 1280 based on the displacement thickness in the inflow cross section. The volume-averaged approach for the homogeneous porous medium shows that the porous impedance scales linearly with the porosity and exponentially with the mean structure size of a porous medium. The drag induced by the porous surface changes the friction velocity and the permeability Reynolds number ReK which determines the porous impedance Rs scaled by ReK-2/3. The trailing-edge noise is analyzed for three solid and three porous trailing edges. The effect of a finite span is investigated by the spanwise correlation model based on the measured coherence distribution. The acoustic prediction shows a good agreement with measurements of the broadband spectrum and the strong tone generated by a finite trailing-edge thickness. The pressure gradient inside the porous media is redistributed by the Darcy drag defined by the viscous permeability and the porosity. The mean pressure increases in the upstream direction inside the porous medium such that the flow acceleration involved in the acoustic generation is reduced inside the porous medium. The noise reduction by a porous medium reaches 11 dB for the trailing-edge shape which possesses a sharp corner for the solid surface. The porous surface applied to a semi-circular trailing edge achieves a 4 dB noise reduction. The directivity pattern for individual components of the acoustic spectrum shows that the massive noise reduction is determined at the tone. Enhanced wave diffraction by the thick flat plate changes

  14. Impact of mussel bioengineering on fine-grained sediment dynamics in a coastal lagoon: A numerical modelling investigation

    Science.gov (United States)

    Forsberg, Pernille L.; Lumborg, Ulrik; Bundgaard, Klavs; Ernstsen, Verner B.

    2017-12-01

    Rødsand lagoon in southeast Denmark is a non-tidal coastal lagoon. It is home to a wide range of marine flora and fauna and part of the Natura 2000 network. An increase in turbidity through elevated levels of suspended sediment concentration (SSC) within the lagoon may affect the ecosystem health due to reduced light penetration. Increasing SSC levels within Rødsand lagoon could be caused by increasing storm intensity or by a sediment spill from dredging activities west of the lagoon in relation to the planned construction of the Fehmarnbelt fixed link between Denmark and Germany. The aim of the study was to investigate the impact of a mussel reef on sediment import and SSC in a semi-enclosed lagoon through the development of a bioengineering modelling application that makes it possible to include the filtrating effect of mussels in a numerical model of the lagoonal system. The numerical implementation of an exterior mussel reef generated a reduction in the SSC in the vicinity of the reef, through the adjacent inlet and in the western part of the lagoon. The mussel reef reduced the sediment import to Rødsand lagoon by 13-22% and reduced the SSC within Rødsand lagoon by 5-9% depending on the filtration rate and the reef length. The results suggest that the implementation of a mussel reef has the potential to relieve the pressure of increasing turbidity levels within a semi-enclosed lagoonal system. However, further assessment and development of the bioengineering application and resulting ecosystem impacts are necessary prior to actual implementation.

  15. A numerical study of tsunami wave impact and run-up on coastal cliffs using a CIP-based model

    Science.gov (United States)

    Zhao, Xizeng; Chen, Yong; Huang, Zhenhua; Hu, Zijun; Gao, Yangyang

    2017-05-01

    There is a general lack of understanding of tsunami wave interaction with complex geographies, especially the process of inundation. Numerical simulations are performed to understand the effects of several factors on tsunami wave impact and run-up in the presence of gentle submarine slopes and coastal cliffs, using an in-house code, a constrained interpolation profile (CIP)-based model. The model employs a high-order finite difference method, the CIP method, as the flow solver; utilizes a VOF-type method, the tangent of hyperbola for interface capturing/slope weighting (THINC/SW) scheme, to capture the free surface; and treats the solid boundary by an immersed boundary method. A series of incident waves are arranged to interact with varying coastal geographies. Numerical results are compared with experimental data and good agreement is obtained. The influences of gentle submarine slope, coastal cliff and incident wave height are discussed. It is found that the tsunami amplification factor varying with incident wave is affected by gradient of cliff slope, and the critical value is about 45°. The run-up on a toe-erosion cliff is smaller than that on a normal cliff. The run-up is also related to the length of a gentle submarine slope with a critical value of about 2.292 m in the present model for most cases. The impact pressure on the cliff is extremely large and concentrated, and the backflow effect is non-negligible. Results of our work are highly precise and helpful in inverting tsunami source and forecasting disaster.

  16. The impact of watershed management on coastal morphology: A case study using an integrated approach and numerical modeling

    Science.gov (United States)

    Samaras, Achilleas G.; Koutitas, Christopher G.

    2014-04-01

    Coastal morphology evolves as the combined result of both natural- and human- induced factors that cover a wide range of spatial and temporal scales of effect. Areas in the vicinity of natural stream mouths are of special interest, as the direct connection with the upstream watershed extends the search for drivers of morphological evolution from the coastal area to the inland as well. Although the impact of changes in watersheds on the coastal sediment budget is well established, references that study concurrently the two fields and the quantification of their connection are scarce. In the present work, the impact of land-use changes in a watershed on coastal erosion is studied for a selected site in North Greece. Applications are based on an integrated approach to quantify the impact of watershed management on coastal morphology through numerical modeling. The watershed model SWAT and a shoreline evolution model developed by the authors (PELNCON-M) are used, evaluating with the latter the performance of the three longshore sediment transport rate formulae included in the model formulation. Results document the impact of crop abandonment on coastal erosion (agricultural land decrease from 23.3% to 5.1% is accompanied by the retreat of ~ 35 m in the vicinity of the stream mouth) and show the effect of sediment transport formula selection on the evolution of coastal morphology. Analysis denotes the relative importance of the parameters involved in the dynamics of watershed-coast systems, and - through the detailed description of a case study - is deemed to provide useful insights for researchers and policy-makers involved in their study.

  17. Crash risk factors for interstate large trucks in North Carolina.

    Science.gov (United States)

    Teoh, Eric R; Carter, Daniel L; Smith, Sarah; McCartt, Anne T

    2017-09-01

    Provide an updated examination of risk factors for large truck involvements in crashes resulting in injury or death. A matched case-control study was conducted in North Carolina of large trucks operated by interstate carriers. Cases were defined as trucks involved in crashes resulting in fatal or non-fatal injury, and one control truck was matched on the basis of location, weekday, time of day, and truck type. The matched-pair odds ratio provided an estimate of the effect of various driver, vehicle, or carrier factors. Out-of-service (OOS) brake violations tripled the risk of crashing; any OOS vehicle defect increased crash risk by 362%. Higher historical crash rates (fatal, injury, or all crashes) of the carrier were associated with increased risk of crashing. Operating on a short-haul exemption increased crash risk by 383%. Antilock braking systems reduced crash risk by 65%. All of these results were statistically significant at the 95% confidence level. Other safety technologies also showed estimated benefits, although not statistically significant. With the exception of the finding that short-haul exemption is associated with increased crash risk, results largely bolster what is currently known about large truck crash risk and reinforce current enforcement practices. Results also suggest vehicle safety technologies can be important in lowering crash risk. This means that as safety technology continues to penetrate the fleet, whether from voluntary usage or government mandates, reductions in large truck crashes may be achieved. Practical application: Results imply that increased enforcement and use of crash avoidance technologies can improve the large truck crash problem. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

  18. A hot spot analysis of teenage crashes : an assessment of crashes in Houston, Texas.

    Science.gov (United States)

    2014-09-01

    Today, states have enacted laws to ensure that teen drivers are more skilled and drive safely. The result is : fewer accidents. However, in previous research, when teen crashes were mapped, certain streets and areas : appeared to have more accidents ...

  19. Analysis of the injury severity of crashes by considering different lighting conditions on two-lane rural roads.

    Science.gov (United States)

    Jafari Anarkooli, A; Hadji Hosseinlou, M

    2016-02-01

    Many studies have examined different factors contributing to the injury severity of crashes; however, relatively few studies have focused on the crashes by considering the specific effects of lighting conditions. This research investigates lighting condition differences in the injury severity of crashes using 3-year (2009-2011) crash data of two-lane rural roads of the state of Washington. Separate ordered-probit models were developed to predict the effects of a set of factors expected to influence injury severity in three lighting conditions; daylight, dark, and dark with street lights. A series of likelihood ratio tests were conducted to determine if these lighting condition models were justified. The modeling results suggest that injury severity in specific lighting conditions are associated with contributing factors in different ways, and that such differences cannot be uncovered by focusing merely on one aggregate model. Key differences include crash location, speed limit, shoulder width, driver action, and three collision types (head-on, rear-end, and right-side impact collisions). This paper highlights the importance of deploying street lights at and near intersections (or access points) on two-lane rural roads because injury severity highly increases when crashes occur at these points in dark conditions. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

  20. Sleep-related vehicle crashes on low speed roads.

    Science.gov (United States)

    Filtness, A J; Armstrong, K A; Watson, A; Smith, S S

    2017-02-01

    Very little is known about the characteristics of sleep related (SR) crashes occurring on low speed roads compared with current understanding of the role of sleep in crashes occurring on high speed roads e.g. motorways. To address this gap, analyses were undertaken to identify the differences and similarities between (1) SR crashes occurring on roads with low (≤60km/h) and high (≥100km/h) speed limits, and (2) SR crashes and not-SR crashes occurring on roads with low speed limits. Police reports of all crashes occurring on low and high speed roads over a ten year period between 2000 and 2009 were examined for Queensland, Australia. Attending police officers identified all crash attributes, including 'fatigue/fell asleep', which indicates that the police believe the crash to have a causal factor relating to falling asleep, sleepiness due to sleep loss, time of day, or fatigue. Driver or rider involvement in crashes was classified as SR or not-SR. All crash-associated variables were compared using Chi-square tests (Cramer's V=effect size). A series of logistic regression was performed, with driver and crash characteristics as predictors of crash category. A conservative alpha level of 0.001 determined statistical significance. There were 440,855 drivers or riders involved in a crash during this time; 6923 (1.6%) were attributed as SR. SR crashes on low speed roads have similar characteristics to those on high speed roads with young (16-24y) males consistently over represented. SR crashes on low speed roads are noticeably different to not-SR crashes in the same speed zone in that male and young novice drivers are over represented and outcomes are more severe. Of all the SR crashes identified, 41% occurred on low speed roads. SR crashes are not confined to high speed roads. Low speed SR crashes warrant specific investigation because they occur in densely populated areas, exposing a greater number of people to risk and have more severe outcomes than not-SR crashes

  1. Motorcycle crash causes and outcomes : pilot study.

    Science.gov (United States)

    2010-06-01

    The number of motorcyclist crash-related fatalities has more than doubled during the past 10 years. In the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) P.L. 109-59, Congress directed the Secretary ...

  2. Child passengers injured in motor vehicle crashes.

    Science.gov (United States)

    Romano, Eduardo; Kelley-Baker, Tara

    2015-02-01

    During 2010, 171,000 children aged 0-14 were injured in motor vehicle crashes. Despite the severity of the problem, research has been limited, and most of what we know about these children emanates from fatal crash databases. Using information from the General Estimates System, this effort examines the occurrence of non-fatal crashes among children aged 0-14 over the last decade. We found that about 1% of the non-injured children in the file had been driven by a driver who was positive for alcohol. This percentage climbed to about 2% among children who had suffered injuries. Compared with the proportion of alcohol-positive drivers at the time of the crash, the proportion of drivers who sped or failed to obey a traffic signal was significantly higher. The finding that drinking and driving with children did not decrease over time questions the adequacy of the extant child endangerment laws. Copyright © 2014 National Safety Council and Elsevier Ltd. All rights reserved.

  3. Mechanism for rapid sawtooth crashes in tokamaks

    International Nuclear Information System (INIS)

    Aydemir, A.Y.; Hazeltine, R.D.

    1986-09-01

    The sawtooth oscillations in the soft x-ray signals observed in tokamaks are associated with periodic changes in the central electron temperature, T/sub e/. Typically, a slow phase during which the central temperature slowly rises is followed by a fast drop in T/sub e/, associated with flattening of the central temperature. The time scale of the slow phase is determined by various transport processes such as ohmic heating. The resistive internal kink mode was invoked by Kadomtsev to explain the crash phase of the oscillations. Fast crash times observed in the large tokamaks are studied here, especially the fast crashes observed in JET. These sawtooth oscillations are characterized by the absence of any discrenible precursor oscillations, and a rapid collapse of the central temperature in about 100 microseconds. During the crash phase, the hot core region rapidly moves outward and is replaced by colder plasma. Then, this highly asymmetric state relaxes (in ∼100μsec) to a poloidally symmetric state in which a ring of hot plasma surrounds the colder core plasma, producing a hollow pressure profile

  4. Vital Signs-Motor Vehicle Crash Injuries

    Centers for Disease Control (CDC) Podcasts

    2014-10-07

    This podcast is based on the October 2014 CDC Vital Signs report. Motor vehicle crashes are costly and preventable. Learn what can be done to help prevent motor vehicle injuries.  Created: 10/7/2014 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 10/7/2014.

  5. Motor Vehicle Crash Injuries PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2014-10-07

    This 60 second Public Service Announcement is based on the October 2014 CDC Vital Signs report. Motor vehicle crashes are costly and preventable. Learn what can be done to help prevent motor vehicle injuries.  Created: 10/7/2014 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 10/7/2014.

  6. Improvement of crash compatibility between cars

    NARCIS (Netherlands)

    Huibers, J.A.H.M.; Faerber, E.; Cesari, D.; Hobbs, A.C.; Kampen, B. van; Paez, J.; Wykes, N.J.

    1998-01-01

    This paper will provide an overview of the research work of the European Enhanced Vehicle-safety Committee (EEVC) in the field of crash compatibility between passenger cars. Since July 1997 the EC Commission is partly funding the research work of EEVC. The running period of this project will be two

  7. Motor Vehicle Crash Deaths PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    This 60 second public service announcement is based on the July 2016 CDC Vital Signs report. In the U.S., about 90 people die in motor vehicle crashes each day and thousands more are injured, resulting in hundreds of millions of dollars in direct medical costs each year. Learn what you can do to stay safe.

  8. 2010 traffic crash facts annual report

    Science.gov (United States)

    2010-01-01

    The death rate on Nebraska roadways during 2010 was .97 persons killed per 100 million vehicle miles traveled. This is the lowest death rate recorded since the state first began keeping motor vehicle crash statistics in 1936. The trend of declining d...

  9. Using linked data to evaluate hospital charges for motor vehicle crash victims in Pennsylvania : Crash Outcome Data Evaluation System (CODES) linked data demonstration project

    Science.gov (United States)

    1998-10-01

    The report uses police-reported crash data that have been linked to hospital discharge data to evaluate charges for hospital care provided to motor vehicle crash victims in Pennsylvania. Approximately 17,000 crash victims were hospitalized in Pennsyl...

  10. How similar are two-unit bicycle and motorcycle crashes?

    Science.gov (United States)

    Haworth, Narelle; Debnath, Ashim Kumar

    2013-09-01

    This paper explores the similarities and differences between bicycle and motorcycle crashes with other motor vehicles. If similar treatments can be effective for both bicycle and motorcycle crashes, then greater benefits in terms of crash costs saved may be possible for the same investment in treatments. To reduce the biases associated with under-reporting of these crashes to police, property damage and minor injury crashes were excluded. The most common crash type for both bicycles (31.1%) and motorcycles (24.5%) was intersection from adjacent approaches. Drivers of other vehicles were coded most at fault in the majority of two-unit bicycle (57.0%) and motorcycle crashes (62.7%). The crash types, patterns of fault and factors affecting fault were generally similar for bicycle and motorcycle crashes. This confirms the need to combat the factors contributing to failure of other drivers to yield right of way to two-wheelers, and suggest that some of these actions should prove beneficial to the safety of both motorized and non-motorized two-wheelers. In contrast, child bicyclists were more often at fault, particularly in crashes involving a vehicle leaving the driveway or footpath. The greater reporting of violations by riders and drivers in motorcycle crashes also deserves further investigation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Direct medical costs of motorcycle crashes in Ontario.

    Science.gov (United States)

    Pincus, Daniel; Wasserstein, David; Nathens, Avery B; Bai, Yu Qing; Redelmeier, Donald A; Wodchis, Walter P

    2017-11-20

    There is no reliable estimate of costs incurred by motorcycle crashes. Our objective was to calculate the direct costs of all publicly funded medical care provided to individuals after motorcycle crashes compared with automobile crashes. We conducted a population-based, matched cohort study of adults in Ontario who presented to hospital because of a motorcycle or automobile crash from 2007 through 2013. For each case, we identified 1 control absent a motor vehicle crash during the study period. Direct costs for each case and control were estimated in 2013 Canadian dollars from the payer perspective using methodology that links health care use to individuals over time. We calculated costs attributable to motorcycle and automobile crashes within 2 years using a difference-in-differences approach. We identified 26 831 patients injured in motorcycle crashes and 281 826 injured in automobile crashes. Mean costs attributable to motorcycle and automobile crashes were $5825 and $2995, respectively ( p motorcycle crashes compared with automobile crashes (2194 injured annually/100 000 registered motorcycles v. 718 injured annually/100 000 registered automobiles; incidence rate ratio [IRR] 3.1, 95% confidence interval [CI] 2.8 to 3.3, p motorcycles v. 12 severe injuries annually/100 000 registered automobiles; IRR 10.4, 95% CI 8.3 to 13.1, p motorcycle in Ontario costs the public health care system 6 times the amount of each registered automobile. Medical costs may provide an additional incentive to improve motorcycle safety. © 2017 Joule Inc. or its licensors.

  12. Fatal crashes involving large numbers of vehicles and weather.

    Science.gov (United States)

    Wang, Ying; Liang, Liming; Evans, Leonard

    2017-12-01

    Adverse weather has been recognized as a significant threat to traffic safety. However, relationships between fatal crashes involving large numbers of vehicles and weather are rarely studied according to the low occurrence of crashes involving large numbers of vehicles. By using all 1,513,792 fatal crashes in the Fatality Analysis Reporting System (FARS) data, 1975-2014, we successfully described these relationships. We found: (a) fatal crashes involving more than 35 vehicles are most likely to occur in snow or fog; (b) fatal crashes in rain are three times as likely to involve 10 or more vehicles as fatal crashes in good weather; (c) fatal crashes in snow [or fog] are 24 times [35 times] as likely to involve 10 or more vehicles as fatal crashes in good weather. If the example had used 20 vehicles, the risk ratios would be 6 for rain, 158 for snow, and 171 for fog. To reduce the risk of involvement in fatal crashes with large numbers of vehicles, drivers should slow down more than they currently do under adverse weather conditions. Driver deaths per fatal crash increase slowly with increasing numbers of involved vehicles when it is snowing or raining, but more steeply when clear or foggy. We conclude that in order to reduce risk of involvement in crashes involving large numbers of vehicles, drivers must reduce speed in fog, and in snow or rain, reduce speed by even more than they already do. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

  13. Under-reporting of road traffic crash data in Ghana.

    Science.gov (United States)

    Salifu, Mohammed; Ackaah, Williams

    2012-01-01

    Having reliable estimates of the shortfalls in road traffic crash data is an important prerequisite for setting more realistic targets for crash/casualty reduction programmes and for a better appreciation of the socio-economic significance of road traffic crashes. This study was carried out to establish realistic estimates of the overall shortfall (under-reporting) in the official crash statistics in Ghana over an eight-year period (1997-2004). Surveys were conducted at hospitals and among drivers to generate relevant alternative data which were then matched against records in police crash data files and the official database. Overall shortfalls came from two sources, namely, 'non-reporting' and 'under-recording'. The results show that the level of non-reporting varied significantly with the severity of the crash from about 57% for property damage crashes through 8% for serious injury crashes to 0% for fatal crashes. Crashes involving cyclists and motorcyclists were also substantially non-reported. Under-recording on the other hand declined significantly over the period from an average of 37% in 1997-1998 to 27% in 2003-2004. Thus, the official statistics of road traffic crashes in Ghana are subject to significant shortfalls that need to be accounted for. Correction factors have therefore been suggested for adjusting the official data.

  14. The Pattern of Road Traffic Crashes in South East Iran.

    Science.gov (United States)

    Rad, Mahdieh; Martiniuk, Alexandra Lc; Ansari-Moghaddam, Alireza; Mohammadi, Mahdi; Rashedi, Fariborz; Ghasemi, Ardavan

    2016-09-01

    In the present study, the epidemiologic aspects of road traffic crashes in South East of Iran are described. This cross-sectional study included the profile of 2398 motor vehicle crashes recorded in the police office in one Year in South East of Iran. Data collected included: demographics, the type of crash, type of involved vehicle, location of crash and factors contributing to the crash. Descriptive statistics were used for data analysis. Collisions with other vehicles or objects contributed the highest proportion (62.4%) of motor vehicle crashes. Human factors including careless driving, violating traffic laws, speeding, and sleep deprivation/fatigue were the most important causal factors accounting for 90% of road crashes. Data shows that 41% of drivers were not using a seat belt at the time of crash. One- third of the crashes resulted in injury (25%) or death (5%). Reckless driving such as speeding and violation of traffic laws are major risk factors for crashes in the South East of Iran. This highlights the need for education along with traffic law enforcement to reduce motor vehicle crashes in future.

  15. Elastic-plastic dynamic behavior of guard pipes due to sudden opening of longitudinal cracks in the inner pipe and crash to the guard pipe wall

    International Nuclear Information System (INIS)

    Theuer, E.; Heller, M.

    1979-01-01

    Integrity of guard pipes is an important parameter in the design of nuclear steam supply systems. A guard pipe shall withstand all kinds of postulated inner pipe breaks without failure. Sudden opening of a crack in the inner pipe and crash of crack borders to the guard pipe wall represent a shock problem where complex phenomena of dynamic plastification as well as dynamic behavior of the entire system have to be taken in consideration. The problem was analyzed by means of Finite Element computation using the general purpose program MARC. Equation of motion was resolved by direct integration using the Newmark β-operator. Analysis shows that after 1,2 m sec crack borders touch the guard pipe wall for the first time. At this moment a considerable amount of local plastification appears in the inner pipe wall, while the guard pipe is nearly unstressed. After initial touching, the crack borders begin to slip along the guard pipe wall. Subsequently, a short withdrawal of the crack borders and a new crash occur, while the inner pipe rolls along the guard pipe wall. The analysis procedure described is suitable for designing numerous guard pipe geometries as well as U-Bolt restraint systems which have to withstand high-energy pipe rupture impact. (orig.)

  16. Survivors’ experiences from a train crash

    Directory of Open Access Journals (Sweden)

    Rebecca Forsberg

    2011-11-01

    Full Text Available Rarely described are people's lived experiences from severe injury events such as train crashes. The number of train crashes named disasters with ≥10 killed and/or ≥100 nonfatally injured grows globally and the trend shows that more people survive these disasters today than did so in the past. This results in an increased number of survivors needing care. The aim of the study was to explore survivors’ experiences from a train crash. Narrative interviews were performed with 14 passengers 4 years after a train crash event. Qualitative content analysis was used to analyse the interviews. Experiences were captured in three main themes: (1 Living in the mode of existential threat describes how the survivors first lost control, then were thrown into a state of unimaginable chaos as they faced death. (2 Dealing with the unthinkable described how survivors restored control, the central role of others, and the importance of reconstructing the event to move forward in their processing. (3 Having cheated death shows how some became shackled by their history, whereas others overcame the haunting of unforgettable memories. Furthermore, the result shows how all experienced a second chance in life. Experiencing a train crash meant that the passengers experienced severe vulnerability and a threat to life and interdependence turned out to play a crucial role. Focusing on helping other passengers on site was one way to regain the loss of control and kept the chaos at bay. Family, friends, and fellow passengers turned out to be extremely important during the recovery process why such closeness should be promoted and facilitated.

  17. Evaluation of Factors Affecting E-Bike Involved Crash and E-Bike License Plate Use in China Using a Bivariate Probit Model

    Directory of Open Access Journals (Sweden)

    Yanyong Guo

    2017-01-01

    Full Text Available The primary objective of this study is to evaluate factors affecting e-bike involved crash and license plate use in China. E-bike crashes data were collected from police database and completed through a telephone interview. Noncrash samples were collected by a questionnaire survey. A bivariate probit (BP model was developed to simultaneously examine the significant factors associated with e-bike involved crash and e-bike license plate and to account for the correlations between them. Marginal effects for contributory factors were calculated to quantify their impacts on the outcomes. The results show that several contributory factors, including gender, age, education level, driver license, car in household, experiences in using e-bike, law compliance, and aggressive driving behaviors, are found to have significant impacts on both e-bike involved crash and license plate use. Moreover, type of e-bike, frequency of using e-bike, impulse behavior, degree of riding experience, and risk perception scale are found to be associated with e-bike involved crash. It is also found that e-bike involved crash and e-bike license plate use are strongly correlated and are negative in direction. The result enhanced our comprehension of the factors related to e-bike involved crash and e-bike license plate use.

  18. Comparative study on deformation and mechanical behavior of corroded pipe: Part I–Numerical simulation and experimental investigation under impact load

    Directory of Open Access Journals (Sweden)

    Dong-Man Ryu

    2017-09-01

    Full Text Available Experiments and a numerical simulation were conducted to investigate the deformation and impact behavior of a corroded pipe, as corrosion, fatigue, and collision phenomena frequently occur in subsea pipelines. This study focuses on the deformation of the corrosion region and the variation of the geometry of the pipe under impact loading. The experiments for the impact behavior of the corroded pipe were performed using an impact test apparatus to validate the results of the simulation. In addition, during the simulation, material tests were performed, and the results were applied to the simulation. The ABAQUS explicit finite element analysis program was used to perform numerical simulations for the parametric study, as well as experiment scenarios, to investigate the effects of defects under impact loading. In addition, the modified ASME B31.8 code formula was proposed to define the damage range for the dented pipe.

  19. Numerically Simulated Impact of Gas Prandtl Number and Flow Model on Efficiency of the Machine-less Energetic Separation Device

    Directory of Open Access Journals (Sweden)

    K. S. Egorov

    2015-01-01

    Full Text Available The presented paper regards the influence of one of similarity criteria – the Prandtl number of gas (Pr - on the efficiency of the machine-less energetic separation device (Leontiev pipe, using numerical modeling in ANSYS software. This device, equally as Rank-Hilsch and Hartman-Schprenger pipes, is designed to separate one gas flow into two flows with different temperatures. One flow (supersonic streams out of the pipe with a temperature higher than initial and the other (subsonic flows out with a temperature lower than initial. This direction of energetic separation is true if the Prandtl number is less than 1 that corresponds to gases.The Prandtl number affects the efficiency of running Leontiev pipe indirectly both through a temperature difference on which a temperature recovery factor has an impact and through a thermal conductivity coefficient that shows the impact of heat transfer intensity between gas and solid wall.The Prandtl number range in the course of research was from 0.1 to 0.7. The Prandtl number value equal to 0.7 corresponds to the air or pure gases (for example, inert argon gas. The Prandtl number equal to 0.2 corresponds to the mixtures of inert gases such as helium-xenon.The numerical modeling completed for the supersonic flow with Mach number 2.0 shows that efficiency of the machine-less energetic separation device has been increased approximately 2 times with the Prandtl number decreasing from 0.7 to 0.2. Moreover, for the counter-flow scheme this effect is a little higher due to its larger heat efficiency in comparison with the straight-flow one.Also, the research shows that the main problem for the further increase of the Leontiev pipe efficiency is a small value of thermal conductivity coefficient, which requires an intensification of the heat exchange, especially in the supersonic flow. It can be obtained, for example, by using a system of oblique shock waves in the supersonic channel.

  20. Analysis of Driver Evasive Maneuvering Prior to Intersection Crashes Using Event Data Recorders.

    Science.gov (United States)

    Scanlon, John M; Kusano, Kristofer D; Gabler, Hampton C

    2015-01-01

    traveling through the intersection without yielding (79.0%). After accounting for uncertainty in the timing of braking and steering data, the median evasive braking time was found to be between 0.5 to 1.5 s prior to impact, and the median initial evasive steering time was found to occur between 0.5 and 0.9 s prior to impact. The median average evasive braking deceleration for all cases was found to be 0.58 g. The median of the maximum evasive vehicle yaw rates was found to be 8.2° per second. Evasive steering direction was found to be most frequently in the direction of travel of the approaching vehicle. The majority of drivers involved in intersection crashes were alert enough to perform an evasive action. Most drivers used a combination of steering and braking to avoid a crash. The average driver attempted to steer and brake at approximately the same time prior to the crash.

  1. Comparison of Expected Crash and Injury Reduction from Production Forward Collision and Lane Departure Warning Systems.

    Science.gov (United States)

    Kusano, Kristofer D; Gabler, Hampton C

    2015-01-01

    The U.S. New Car Assessment Program (NCAP) now tests for forward collision warning (FCW) and lane departure warning (LDW). The design of these warnings differs greatly between vehicles and can result in different real-world field performance in preventing or mitigating the effects of collisions. The objective of this study was to compare the expected number of crashes and injured drivers that could be prevented if all vehicles in the fleet were equipped with the FCW and LDW systems tested under the U.S. NCAP. To predict the potential crashes and serious injury that could be prevented, our approach was to computationally model the U.S. crash population. The models simulated all rear-end and single-vehicle road departure collisions that occurred in a nationally representative crash database (NASS-CDS). A sample of 478 single-vehicle crashes from NASS-CDS 2012 was the basis for 24,822 simulations for LDW. A sample of 1,042 rear-end collisions from NASS-CDS years 1997-2013 was the basis for 7,616 simulations for FCW. For each crash, 2 simulations were performed: (1) without the system present and (2) with the system present. Models of each production safety system were based on 54 model year 2010-2014 vehicles that were evaluated under the NCAP confirmation procedure for LDW and/or FCW. NCAP performed 40 LDW and 45 FCW tests of these vehicles. The design of the FCW systems had a dramatic impact on their potential to prevent crashes and injuries. Between 0 and 67% of crashes and 2 and 69% of moderately to fatally injured drivers in rear-end impacts could have been prevented if all vehicles were equipped with the FCW systems. Earlier warning times resulted in increased benefits. The largest effect on benefits, however, was the lower operating speed threshold of the systems. Systems that only operated at speeds above 20 mph were less than half as effective as those that operated above 5 mph with similar warning times. The production LDW systems could have prevented

  2. Injury mitigation estimates for an intersection driver assistance system in straight crossing path crashes in the United States.

    Science.gov (United States)

    Scanlon, John M; Sherony, Rini; Gabler, Hampton C

    2017-05-29

    Accounting for one fifth of all crashes and one sixth of all fatal crashes in the United States, intersection crashes are among the most frequent and fatal crash modes. Intersection advanced driver assistance systems (I-ADAS) are emerging vehicle-based active safety systems that aim to help drivers safely navigate intersections. The objective of this study was to estimate the number of crashes and number of vehicles with a seriously injured driver (Maximum Abbreviated Injury Scale [MAIS] 3+) that could be prevented or reduced if, for every straight crossing path (SCP) intersection crash, one of the vehicles had been equipped with an I-ADAS. This study retrospectively simulated 448 U.S. SCP crashes as if one of the vehicles had been equipped with I-ADAS. Crashes were reconstructed to determine the path and speeds traveled by the vehicles. Cases were then simulated with I-ADAS. A total of 30 variations of I-ADAS were considered in this study. These variations consisted of 5 separate activation timing thresholds, 3 separate computational latency times, and 2 different I-ADAS response modalities (i.e., a warning or autonomous braking). The likelihood of a serious driver injury was computed for every vehicle in every crash using impact delta-V. The results were then compiled across all crashes in order to estimate system effectiveness. The model predicted that an I-ADAS that delivers an alert to the driver has the potential to prevent 0-23% of SCP crashes and 0-25% of vehicles with a seriously injured driver. Conversely, an I-ADAS that autonomously brakes was found to have the potential to prevent 25-59% of crashes and 38-79% of vehicles with a seriously injured driver. I-ADAS effectiveness is a strong function of design. Increasing computational latency time from 0 to 0.5 s was found to reduce crash and injury prevention estimates by approximately one third. For an I-ADAS that delivers an alert, crash/injury prevention effectiveness was found to be very sensitive to

  3. Neighborhood Influences on Vehicle-Pedestrian Crash Severity.

    Science.gov (United States)

    Toran Pour, Alireza; Moridpour, Sara; Tay, Richard; Rajabifard, Abbas

    2017-12-01

    Socioeconomic factors are known to be contributing factors for vehicle-pedestrian crashes. Although several studies have examined the socioeconomic factors related to the location of the crashes, limited studies have considered the socioeconomic factors of the neighborhood where the road users live in vehicle-pedestrian crash modelling. This research aims to identify the socioeconomic factors related to both the neighborhoods where the road users live and where crashes occur that have an influence on vehicle-pedestrian crash severity. Data on vehicle-pedestrian crashes that occurred at mid-blocks in Melbourne, Australia, was analyzed. Neighborhood factors associated with road users' residents and location of crash were investigated using boosted regression tree (BRT). Furthermore, partial dependence plots were applied to illustrate the interactions between these factors. We found that socioeconomic factors accounted for 60% of the 20 top contributing factors to vehicle-pedestrian crashes. This research reveals that socioeconomic factors of the neighborhoods where the road users live and where the crashes occur are important in determining the severity of the crashes, with the former having a greater influence. Hence, road safety countermeasures, especially those focussing on the road users, should be targeted at these high-risk neighborhoods.

  4. DRSPALL: Impact of the Modification of the Numerical Spallings Model on Waste Isolation Pilot Plant Performance Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Kicker, Dwayne Curtis [Stoller Newport News Nuclear, Inc., Carlsbad, NM (United States); Herrick, Courtney G. [Sandia National Lab. (SNL-NM), Carlsbad, NM (United States); Zeitler, Todd [Sandia National Lab. (SNL-NM), Carlsbad, NM (United States); Malama, Bwalya [Sandia National Lab. (SNL-NM), Carlsbad, NM (United States); Rudeen, David Keith [GRAM Inc., Albuquerque, NM (United States); Gilkey, Amy P. [GRAM Inc., Albuquerque, NM (United States)

    2016-01-01

    The numerical code DRSPALL (from direct release spallings) is written to calculate the volume of Waste Isolation Pilot Plant (WIPP) solid waste subject to material failure and transport to the surface as a result of a hypothetical future inadvertent drilling intrusion. An error in the implementation of the DRSPALL finite difference equations was discovered as documented in Software Problem Report (SPR) 13-001. The modifications to DRSPALL to correct the finite difference equations are detailed, and verification and validation testing has been completed for the modified DRSPALL code. The complementary cumulative distribution function (CCDF) of spallings releases obtained using the modified DRSPALL is higher compared to that found in previous WIPP performance assessment (PA) calculations. Compared to previous PAs, there was an increase in the number of vectors that result in a nonzero spallings volume, which generally translates to an increase in spallings releases. The overall mean CCDFs for total releases using the modified DRSPALL are virtually unchanged, thus the modification to DRSPALL did not impact WIPP PA calculation results.

  5. Impact of trees on pollutant dispersion in street canyons: A numerical study of the annual average effects in Antwerp, Belgium.

    Science.gov (United States)

    Vranckx, Stijn; Vos, Peter; Maiheu, Bino; Janssen, Stijn

    2015-11-01

    Effects of vegetation on pollutant dispersion receive increased attention in attempts to reduce air pollutant concentration levels in the urban environment. In this study, we examine the influence of vegetation on the concentrations of traffic pollutants in urban street canyons using numerical simulations with the CFD code OpenFOAM. This CFD approach is validated against literature wind tunnel data of traffic pollutant dispersion in street canyons. The impact of trees is simulated for a variety of vegetation types and the full range of approaching wind directions at 15° interval. All these results are combined using meteo statistics, including effects of seasonal leaf loss, to determine the annual average effect of trees in street canyons. This analysis is performed for two pollutants, elemental carbon (EC) and PM10, using background concentrations and emission strengths for the city of Antwerp, Belgium. The results show that due to the presence of trees the annual average pollutant concentrations increase with about 8% (range of 1% to 13%) for EC and with about 1.4% (range of 0.2 to 2.6%) for PM10. The study indicates that this annual effect is considerably smaller than earlier estimates which are generally based on a specific set of governing conditions (1 wind direction, full leafed trees and peak hour traffic emissions). Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Evaluating the Impacts of NASA/SPoRT Daily Greenness Vegetation Fraction on Land Surface Model and Numerical Weather Forecasts

    Science.gov (United States)

    Bell, Jordan R.; Case, Jonathan L.; Molthan, Andrew L.

    2011-01-01

    The NASA Short-term Prediction Research and Transition (SPoRT) Center develops new products and techniques that can be used in operational meteorology. The majority of these products are derived from NASA polar-orbiting satellite imagery from the Earth Observing System (EOS) platforms. One such product is a Greenness Vegetation Fraction (GVF) dataset, which is produced from Moderate Resolution Imaging Spectroradiometer (MODIS) data aboard the NASA EOS Aqua and Terra satellites. NASA SPoRT began generating daily real-time GVF composites at 1-km resolution over the Continental United States (CONUS) on 1 June 2010. The purpose of this study is to compare the National Centers for Environmental Prediction (NCEP) climatology GVF product (currently used in operational weather models) to the SPoRT-MODIS GVF during June to October 2010. The NASA Land Information System (LIS) was employed to study the impacts of the new SPoRT-MODIS GVF dataset on land surface models apart from a full numerical weather prediction (NWP) model. For the 2010 warm season, the SPoRT GVF in the western portion of the CONUS was generally higher than the NCEP climatology. The eastern CONUS GVF had variations both above and below the climatology during the period of study. These variations in GVF led to direct impacts on the rates of heating and evaporation from the land surface. The second phase of the project is to examine the impacts of the SPoRT GVF dataset on NWP using the Weather Research and Forecasting (WRF) model. Two separate WRF model simulations were made for individual severe weather case days using the NCEP GVF (control) and SPoRT GVF (experimental), with all other model parameters remaining the same. Based on the sensitivity results in these case studies, regions with higher GVF in the SPoRT model runs had higher evapotranspiration and lower direct surface heating, which typically resulted in lower (higher) predicted 2-m temperatures (2-m dewpoint temperatures). The opposite was true

  7. Evaluating the Impacts of NASA/SPoRT Daily Greenness Vegetation Fraction on Land Surface Model and Numerical Weather Forecasts

    Science.gov (United States)

    Bell, Jordan R.; Case, Jonathan L.; LaFontaine, Frank J.; Kumar, Sujay V.

    2012-01-01

    The NASA Short-term Prediction Research and Transition (SPoRT) Center has developed a Greenness Vegetation Fraction (GVF) dataset, which is updated daily using swaths of Normalized Difference Vegetation Index data from the Moderate Resolution Imaging Spectroradiometer (MODIS) data aboard the NASA EOS Aqua and Terra satellites. NASA SPoRT began generating daily real-time GVF composites at 1-km resolution over the Continental United States (CONUS) on 1 June 2010. The purpose of this study is to compare the National Centers for Environmental Prediction (NCEP) climatology GVF product (currently used in operational weather models) to the SPoRT-MODIS GVF during June to October 2010. The NASA Land Information System (LIS) was employed to study the impacts of the SPoRT-MODIS GVF dataset on a land surface model (LSM) apart from a full numerical weather prediction (NWP) model. For the 2010 warm season, the SPoRT GVF in the western portion of the CONUS was generally higher than the NCEP climatology. The eastern CONUS GVF had variations both above and below the climatology during the period of study. These variations in GVF led to direct impacts on the rates of heating and evaporation from the land surface. In the West, higher latent heat fluxes prevailed, which enhanced the rates of evapotranspiration and soil moisture depletion in the LSM. By late Summer and Autumn, both the average sensible and latent heat fluxes increased in the West as a result of the more rapid soil drying and higher coverage of GVF. The impacts of the SPoRT GVF dataset on NWP was also examined for a single severe weather case study using the Weather Research and Forecasting (WRF) model. Two separate coupled LIS/WRF model simulations were made for the 17 July 2010 severe weather event in the Upper Midwest using the NCEP and SPoRT GVFs, with all other model parameters remaining the same. Based on the sensitivity results, regions with higher GVF in the SPoRT model runs had higher evapotranspiration and

  8. Pilot ejection, parachute, and helicopter crash injuries.

    Science.gov (United States)

    McBratney, Colleen M; Rush, Stephen; Kharod, Chetan U

    2014-01-01

    USAF Pararescuemen (PJs) respond to downed aircrew as a fundamental mission for personnel recovery (PR), one of the Air Force's core functions. In addition to responding to these in Military settings, the PJs from the 212 Rescue Squadron routinely respond to small plane crashes in remote regions of Alaska. While there is a paucity of information on the latter, there have been articles detailing injuries sustained from helicopter crashes and while ejecting or parachuting from fixed wing aircraft. The following represents a new chapter added to the Pararescue Medical Operations Handbook, Sixth Edition (2014, editors Matt Wolf, MD, and Stephen Rush, MD, in press). It was designed to be a quick reference for PJs and their Special Operations flight surgeons to help with understanding of mechanism of injury with regard to pilot ejection, parachute, and helicopter accident injuries. It outlines the nature of the injuries sustained in such mishaps and provides an epidemiologic framework from which to approach the problem. 2014.

  9. Camera systems for crash and hyge testing

    Science.gov (United States)

    Schreppers, Frederik

    1995-05-01

    Since the beginning of the use of high speed cameras for crash and hyge- testing substantial changements have taken place. Both the high speed cameras and the electronic control equipment are more sophisticated nowadays. With regard to high speed equipment, a short historical retrospective view will show that concerning high speed cameras, the improvements are mainly concentrated in design details, where as the electronic control equipment has taken full advantage of the rapid progress in electronic and computer technology in the course of the last decades. Nowadays many companies and institutes involved in crash and hyge-testing wish to perform this testing, as far as possible, as an automatic computer controlled routine in order to maintain and improve security and quality. By means of several in practice realize solutions, it will be shown how their requirements could be met.

  10. Motor Vehicle Crash Deaths PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2016-07-06

    This 60 second public service announcement is based on the July 2016 CDC Vital Signs report. In the U.S., about 90 people die in motor vehicle crashes each day and thousands more are injured, resulting in hundreds of millions of dollars in direct medical costs each year. Learn what you can do to stay safe.  Created: 7/6/2016 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 7/6/2016.

  11. Crash Test of an MD-500 Helicopter with a Deployable Energy Absorber Concept

    Science.gov (United States)

    Littell, Justin D.; Jackson, Karen E.; Kellas, Sotiris

    2010-01-01

    On December 2, 2009, a full scale crash test was successfully conducted of a MD-500 helicopter at the NASA Langley Research Center Landing and Impact Research Facility . The purpose of this test was to evaluate a novel composite honeycomb deployable energy absorbing (DEA) concept for attenuation of structural and crew loads during helicopter crashes under realistic crash conditions. The DEA concept is an alternative to external airbags, and absorbs impact energy through crushing. In the test, the helicopter impacted the concrete surface with 11.83 m/s (38.8 ft/s) horizontal, 7.80 m/s (25.6 ft/s) vertical and 0.15 m/s (0.5 ft/s) lateral velocities; corresponding to a resultant velocity of 14.2 m/s (46.5 ft/s). The airframe and skid gear were instrumented with accelerometers and strain gages to determine structural integrity and load attenuation, while the skin of the airframe was covered with targets for use by photogrammetry to record gross vehicle motion before, during, and after the impact. Along with the collection of airframe data, one Hybrid III 50th percentile anthropomorphic test device (ATD), two Hybrid II 50th percentile ATDs and a specialized human surrogate torso model (HSTM) occupant were seated in the airframe and instrumented for the collection of occupant loads. Resultant occupant data showed that by using the DEA, the loads on the Hybrid II and Hybrid III ATDs were in the Low Risk regime for the injury criteria, while structural data showed the airframe retained its structural integrity post crash. Preliminary results show that the DEA is a viable concept for the attenuation of impact loads.

  12. Using event-triggered naturalistic data to examine the prevalence of teen driver distractions in rear-end crashes.

    Science.gov (United States)

    Carney, Cher; Harland, Karisa K; McGehee, Daniel V

    2016-06-01

    While teen driver distraction is cited as a leading cause of crashes, especially rear-end crashes, little information is available regarding its true prevalence. The majority of distraction studies rely on data derived from police reports, which provide limited information regarding driver distraction. This study examined over 400 teen driver rear-end crashes captured by in-vehicle event recorders. A secondary data analysis was conducted, paying specific attention to driver behaviors, eyes-off-road time, and response times to lead-vehicle braking. Among teens in moderate to severe rear-end crashes, over 75% of drivers were observed engaging in a potentially distracting behavior. The most frequently seen driver behaviors were cell phone use, attending to a location outside the vehicle, and attending to passengers. Drivers using a cell phone had a significantly longer response time than drivers not engaged in any behaviors, while those attending to passengers did not. Additionally, in about 50% of the rear-end crashes where the driver was operating/looking at a phone (e.g., texting), the driver showed no driver response (i.e., braking or steering input) before impact, compared to 10% of crashes where the driver was attending to a passenger. The high frequency of attending to passengers and use of a cell phone leading up to a crash, compounded with the associated risks, underlines the importance of continued investigation in these areas. Parents and teens must be educated regarding the frequency of and the potential effects of distractions. Additional enforcement may be necessary if Graduated Driver Licensing (GDL) programs are to be effective. Systems that alert distracted teens could also be especially helpful in reducing rear-end collisions. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

  13. Prescription medicine use by pedestrians and the risk of injurious road traffic crashes: A case-crossover study.

    Directory of Open Access Journals (Sweden)

    Mélanie Née

    2017-07-01

    Full Text Available While some medicinal drugs have been found to affect driving ability, no study has investigated whether a relationship exists between these medicines and crashes involving pedestrians. The aim of this study was to explore the association between the use of medicinal drugs and the risk of being involved in a road traffic crash as a pedestrian.Data from 3 French nationwide databases were matched. We used the case-crossover design to control for time-invariant factors by using each case as its own control. To perform multivariable analysis and limit false-positive results, we implemented a bootstrap version of Lasso. To avoid the effect of unmeasured time-varying factors, we varied the length of the washout period from 30 to 119 days before the crash. The matching procedure led to the inclusion of 16,458 pedestrians involved in an injurious road traffic crash from 1 July 2005 to 31 December 2011. We found 48 medicine classes with a positive association with the risk of crash, with median odds ratios ranging from 1.12 to 2.98. Among these, benzodiazepines and benzodiazepine-related drugs, antihistamines, and anti-inflammatory and antirheumatic drugs were among the 10 medicines most consumed by the 16,458 pedestrians. Study limitations included slight overrepresentation of pedestrians injured in more severe crashes, lack of information about self-medication and the use of over-the-counter drugs, and lack of data on amount of walking.Therapeutic classes already identified as impacting the ability to drive, such as benzodiazepines and antihistamines, are also associated with an increased risk of pedestrians being involved in a road traffic crash. This study on pedestrians highlights the necessity of improving awareness of the effect of these medicines on this category of road user.

  14. Identification and validation of a logistic regression model for predicting serious injuries associated with motor vehicle crashes.

    Science.gov (United States)

    Kononen, Douglas W; Flannagan, Carol A C; Wang, Stewart C

    2011-01-01

    A multivariate logistic regression model, based upon National Automotive Sampling System Crashworthiness Data System (NASS-CDS) data for calendar years 1999-2008, was developed to predict the probability that a crash-involved vehicle will contain one or more occupants with serious or incapacitating injuries. These vehicles were defined as containing at least one occupant coded with an Injury Severity Score (ISS) of greater than or equal to 15, in planar, non-rollover crash events involving Model Year 2000 and newer cars, light trucks, and vans. The target injury outcome measure was developed by the Centers for Disease Control and Prevention (CDC)-led National Expert Panel on Field Triage in their recent revision of the Field Triage Decision Scheme (American College of Surgeons, 2006). The parameters to be used for crash injury prediction were subsequently specified by the National Expert Panel. Model input parameters included: crash direction (front, left, right, and rear), change in velocity (delta-V), multiple vs. single impacts, belt use, presence of at least one older occupant (≥ 55 years old), presence of at least one female in the vehicle, and vehicle type (car, pickup truck, van, and sport utility). The model was developed using predictor variables that may be readily available, post-crash, from OnStar-like telematics systems. Model sensitivity and specificity were 40% and 98%, respectively, using a probability cutpoint of 0.20. The area under the receiver operator characteristic (ROC) curve for the final model was 0.84. Delta-V (mph), seat belt use and crash direction were the most important predictors of serious injury. Due to the complexity of factors associated with rollover-related injuries, a separate screening algorithm is needed to model injuries associated with this crash mode. Copyright © 2010 Elsevier Ltd. All rights reserved.

  15. Life-threatening motor vehicle crashes in bright sunlight

    OpenAIRE

    Redelmeier, Donald A.; Raza, Sheharyar

    2017-01-01

    Abstract Bright sunlight may create visual illusions that lead to driver error, including fallible distance judgment from aerial perspective. We tested whether the risk of a life-threatening motor vehicle crash was increased when driving in bright sunlight. This longitudinal, case-only, paired-comparison analysis evaluated patients hospitalized because of a motor vehicle crash between January 1, 1995 and December 31, 2014. The relative risk of a crash associated with bright sunlight was estim...

  16. An Initial Assessment of the Impact of CYGNSS Ocean Surface Wind Assimilation on Navy Global and Mesoscale Numerical Weather Prediction

    Science.gov (United States)

    Baker, N. L.; Tsu, J.; Swadley, S. D.

    2017-12-01

    We assess the impact of assimilation of CYclone Global Navigation Satellite System (CYGNSS) ocean surface winds observations into the NAVGEM[i] global and COAMPS®[ii] mesoscale numerical weather prediction (NWP) systems. Both NAVGEM and COAMPS® used the NRL 4DVar assimilation system NAVDAS-AR[iii]. Long term monitoring of the NAVGEM Forecast Sensitivity Observation Impact (FSOI) indicates that the forecast error reduction for ocean surface wind vectors (ASCAT and WindSat) are significantly larger than for SSMIS wind speed observations. These differences are larger than can be explained by simply two pieces of information (for wind vectors) versus one (wind speed). To help understand these results, we conducted a series of Observing System Experiments (OSEs) to compare the assimilation of ASCAT wind vectors with the equivalent (computed) ASCAT wind speed observations. We found that wind vector assimilation was typically 3 times more effective at reducing the NAVGEM forecast error, with a higher percentage of beneficial observations. These results suggested that 4DVar, in the absence of an additional nonlinear outer loop, has limited ability to modify the analysis wind direction. We examined several strategies for assimilating CYGNSS ocean surface wind speed observations. In the first approach, we assimilated CYGNSS as wind speed observations, following the same methodology used for SSMIS winds. The next two approaches converted CYGNSS wind speed to wind vectors, using NAVGEM sea level pressure fields (following Holton, 1979), and using NAVGEM 10-m wind fields with the AER Variational Analysis Method. Finally, we compared these methods to CYGNSS wind speed assimilation using multiple outer loops with NAVGEM Hybrid 4DVar. Results support the earlier studies suggesting that NAVDAS-AR wind speed assimilation is sub-optimal. We present detailed results from multi-month NAVGEM assimilation runs along with case studies using COAMPS®. Comparisons include the fit of

  17. Crash data and rates for age-sex groups of drivers, 1996

    Science.gov (United States)

    1998-01-01

    The results of this research note are based on 1996data for fatal crashes, driver licenses, and estimates of total crashes based upon data obtained from the nationally representative sample of crashes gathered in the General Estimates System (GES). T...

  18. Association knowledge for fatal run-off-road crashes by Multiple Correspondence Analysis

    Directory of Open Access Journals (Sweden)

    Subasish Das

    2016-03-01

    Results of the MCA method can help researchers select the most effective crash countermeasures. Further work on the degree of association between the identified crash contributing factors can help safety management systems develop the most efficient crash reduction strategies.

  19. The advanced role of computational mechanics and visualization in science and technology: analysis of the Germanwings Flight 9525 crash

    International Nuclear Information System (INIS)

    Chen, Goong; Wang, Yi-Ching; Gu, Cong; Perronnet, Alain; Yao, Pengfei; Bin-Mohsin, Bandar; Hajaiej, Hichem; Scully, Marlan O

    2017-01-01

    Computational mathematics, physics and engineering form a major constituent of modern computational science, which now stands on an equal footing with the established branches of theoretical and experimental sciences. Computational mechanics solves problems in science and engineering based upon mathematical modeling and computing, bypassing the need for expensive and time-consuming laboratory setups and experimental measurements. Furthermore, it allows the numerical simulations of large scale systems, such as the formation of galaxies that could not be done in any earth bound laboratories. This article is written as part of the 21st Century Frontiers Series to illustrate some state-of-the-art computational science. We emphasize how to do numerical modeling and visualization in the study of a contemporary event, the pulverizing crash of the Germanwings Flight 9525 on March 24, 2015, as a showcase. Such numerical modeling and the ensuing simulation of aircraft crashes into land or mountain are complex tasks as they involve both theoretical study and supercomputing of a complex physical system. The most tragic type of crash involves ‘pulverization’ such as the one suffered by this Germanwings flight. Here, we show pulverizing airliner crashes by visualization through video animations from supercomputer applications of the numerical modeling tool LS-DYNA. A sound validation process is challenging but essential for any sophisticated calculations. We achieve this by validation against the experimental data from a crash test done in 1993 of an F4 Phantom II fighter jet into a wall. We have developed a method by hybridizing two primary methods: finite element analysis and smoothed particle hydrodynamics . This hybrid method also enhances visualization by showing a ‘debris cloud’. Based on our supercomputer simulations and the visualization, we point out that prior works on this topic based on ‘hollow interior’ modeling can be quite problematic and, thus, not

  20. The advanced role of computational mechanics and visualization in science and technology: analysis of the Germanwings Flight 9525 crash

    Science.gov (United States)

    Chen, Goong; Wang, Yi-Ching; Perronnet, Alain; Gu, Cong; Yao, Pengfei; Bin-Mohsin, Bandar; Hajaiej, Hichem; Scully, Marlan O.

    2017-03-01

    Computational mathematics, physics and engineering form a major constituent of modern computational science, which now stands on an equal footing with the established branches of theoretical and experimental sciences. Computational mechanics solves problems in science and engineering based upon mathematical modeling and computing, bypassing the need for expensive and time-consuming laboratory setups and experimental measurements. Furthermore, it allows the numerical simulations of large scale systems, such as the formation of galaxies that could not be done in any earth bound laboratories. This article is written as part of the 21st Century Frontiers Series to illustrate some state-of-the-art computational science. We emphasize how to do numerical modeling and visualization in the study of a contemporary event, the pulverizing crash of the Germanwings Flight 9525 on March 24, 2015, as a showcase. Such numerical modeling and the ensuing simulation of aircraft crashes into land or mountain are complex tasks as they involve both theoretical study and supercomputing of a complex physical system. The most tragic type of crash involves ‘pulverization’ such as the one suffered by this Germanwings flight. Here, we show pulverizing airliner crashes by visualization through video animations from supercomputer applications of the numerical modeling tool LS-DYNA. A sound validation process is challenging but essential for any sophisticated calculations. We achieve this by validation against the experimental data from a crash test done in 1993 of an F4 Phantom II fighter jet into a wall. We have developed a method by hybridizing two primary methods: finite element analysis and smoothed particle hydrodynamics. This hybrid method also enhances visualization by showing a ‘debris cloud’. Based on our supercomputer simulations and the visualization, we point out that prior works on this topic based on ‘hollow interior’ modeling can be quite problematic and, thus, not

  1. A joint econometric analysis of seat belt use and crash-related injury severity.

    Science.gov (United States)

    Eluru, Naveen; Bhat, Chandra R

    2007-09-01

    This paper formulates a comprehensive econometric structure that recognizes two important issues in crash-related injury severity analysis. First, the impact of a factor on injury severity may be moderated by various observed and unobserved variables specific to an individual or to a crash. Second, seat belt use is likely to be endogenous to injury severity. That is, it is possible that intrinsically unsafe drivers do not wear seat belts and are the ones likely to be involved in high injury severity crashes because of their unsafe driving habits. The preceding issues are considered in the current research effort through the development of a comprehensive model of seat belt use and injury severity that takes the form of a joint correlated random coefficients binary-ordered response system. To our knowledge, this is the first instance of such a model formulation and application not only in the safety analysis literature, but in the econometrics literature in general. The empirical analysis is based on the 2003 General Estimates System (GES) data base. Several types of variables are considered to explain seat belt use and injury severity levels, including driver characteristics, vehicle characteristics, roadway design attributes, environmental factors, and crash characteristics. The results, in addition to confirming the effects of various explanatory variables, also highlight the importance of (a) considering the moderating effects of unobserved individual/crash-related factors on the determinants of injury severity and (b) seat belt use endogeneity. From a policy standpoint, the results suggest that seat belt non-users, when apprehended in the act, should perhaps be subjected to both a fine (to increase the chances that they wear seat belts) as well as mandatory enrollment in a defensive driving course (to attempt to change their aggressive driving behaviors).

  2. Analyzing fault in pedestrian-motor vehicle crashes in North Carolina.

    Science.gov (United States)

    Ulfarsson, Gudmundur F; Kim, Sungyop; Booth, Kathleen M

    2010-11-01

    Crashes between pedestrians and motor vehicles are an important traffic safety concern. This paper explores the assignment of fault in such crashes, where observed factors are associated with pedestrian at fault, driver at fault, or both at fault. The analysis is based on police reported crash data for 1997 through 2000 in North Carolina, U.S.A. The results show that pedestrians are found at fault in 59% of the crashes, drivers in 32%, and both are found at fault in 9%. The results indicate drivers need to take greater notice of pedestrians when drivers are turning, merging, and backing up as these are some of the prime factors associated with the driver being found at fault in a crash. Pedestrians must apply greater caution when crossing streets, waiting to cross, and when walking along roads, as these are correlated with pedestrians being found at fault. The results suggest a need for campaigns focused on positively affecting pedestrian street-crossing behavior in combination with added jaywalking enforcement. The results also indicate that campaigns to increase the use of pedestrian visibility improvements at night can have a significant positive impact on traffic safety. Intoxication is a concern and the results show that it is not only driver intoxication that is affecting safety, but also pedestrian intoxication. The findings show in combination with other research in the field, that results from traffic safety studies are not necessarily transferable between distant geographic locations, and that location-specific safety research needs to take place. It is also important to further study the specific effects of the design of the pedestrian environment on safety, e.g. crosswalk spacing, signal timings, etc., which together may affect pedestrian safety and pedestrian behavior. 2010 Elsevier Ltd. All rights reserved.

  3. Modeling wrong-way crashes and fatalities on arterials and freeways

    Directory of Open Access Journals (Sweden)

    Raj V. Ponnaluri

    2018-04-01

    Full Text Available Wrong way driving (WWD research and mitigation measures have primarily focused on limited access facilities. This is most likely due to the higher incidence of fatal WWD crashes with dramatic consequences on freeways, media attention, and a call for innovative solutions to address the problem. While public agencies and published literature address WWD incidence on freeway systems, the crash analyses on non-limited access facilities, i.e., arterial corridors, remains untouched. This research extends previous works and attempts to provide many new perspectives on arterial WWD incidence. In particular, one work showed that while WWD fatalities are more likely to occur on freeways, the likelihood of these crashes is higher on arterials. Hence this work with univariate and multivariate analyses of WWD and non-WWD crashes, and fatal and non-fatal WWD incidents. Results show the impressive negative impacts of alcohol use, driver defect, nighttime and weekend incidence, poor street lighting, low traffic volumes, rural geography, and median and shoulder widths. The objective here is to highlight the need for paying greater attention to WWD crashes on arterial corridors as is done with fatal WWD incidents on freeway systems. It suffices to say that while engineering countermeasures should evolve from the traditional signing and pavement markings to connected vehicle technology applications, there is a clear and compelling need to focus on educational campaigns specifically targeting drunken driving, and enforcement initiatives with an objective to mitigate WWD in the most efficient manner possible. Keywords: Wrong-way driving, Modeling, Arterials and freeways, Logistic regression, Likelihood

  4. High risk of near-crash driving events following night-shift work.

    Science.gov (United States)

    Lee, Michael L; Howard, Mark E; Horrey, William J; Liang, Yulan; Anderson, Clare; Shreeve, Michael S; O'Brien, Conor S; Czeisler, Charles A

    2016-01-05

    Night-shift workers are at high risk of drowsiness-related motor vehicle crashes as a result of circadian disruption and sleep restriction. However, the impact of actual night-shift work on measures of drowsiness and driving performance while operating a real motor vehicle remains unknown. Sixteen night-shift workers completed two 2-h daytime driving sessions on a closed driving track at the Liberty Mutual Research Institute for Safety: (i) a postsleep baseline driving session after an average of 7.6 ± 2.4 h sleep the previous night with no night-shift work, and (ii) a postnight-shift driving session following night-shift work. Physiological measures of drowsiness were collected, including infrared reflectance oculography, electroencephalography, and electrooculography. Driving performance measures included lane excursions, near-crash events, and drives terminated because of failure to maintain control of the vehicle. Eleven near-crashes occurred in 6 of 16 postnight-shift drives (37.5%), and 7 of 16 postnight-shift drives (43.8%) were terminated early for safety reasons, compared with zero near-crashes or early drive terminations during 16 postsleep drives (Fishers exact: P = 0.0088 and P = 0.0034, respectively). Participants had a significantly higher rate of lane excursions, average Johns Drowsiness Scale, blink duration, and number of slow eye movements during postnight-shift drives compared with postsleep drives (3.09/min vs. 1.49/min; 1.71 vs. 0.97; 125 ms vs. 100 ms; 35.8 vs. 19.1; respectively, P Night-shift work increases driver drowsiness, degrading driving performance and increasing the risk of near-crash drive events. With more than 9.5 million Americans working overnight or rotating shifts and one-third of United States commutes exceeding 30 min, these results have implications for traffic and occupational safety.

  5. Realizing stock market crashes: stochastic cusp catastrophe model of returns under time-varying volatility

    Czech Academy of Sciences Publication Activity Database

    Baruník, Jozef; Kukačka, Jiří

    2015-01-01

    Roč. 15, č. 6 (2015), s. 959-973 ISSN 1469-7688 R&D Projects: GA ČR GA402/09/0965; GA ČR GA13-32263S EU Projects: European Commission 612955 - FINMAP Institutional support: RVO:67985556 Keywords : Stochastic cusp catastrophe model * Realized volatility * Bifurcations * Stock market crash Subject RIV: AH - Economics Impact factor: 0.794, year: 2015 http://library.utia.cas.cz/separaty/2014/E/barunik-0434202.pdf

  6. An investigation of the speeding-related crash designation through crash narrative reviews sampled via logistic regression.

    Science.gov (United States)

    Fitzpatrick, Cole D; Rakasi, Saritha; Knodler, Michael A

    2017-01-01

    Speed is one of the most important factors in traffic safety as higher speeds are linked to increased crash risk and higher injury severities. Nearly a third of fatal crashes in the United States are designated as "speeding-related", which is defined as either "the driver behavior of exceeding the posted speed limit or driving too fast for conditions." While many studies have utilized the speeding-related designation in safety analyses, no studies have examined the underlying accuracy of this designation. Herein, we investigate the speeding-related crash designation through the development of a series of logistic regression models that were derived from the established speeding-related crash typologies and validated using a blind review, by multiple researchers, of 604 crash narratives. The developed logistic regression model accurately identified crashes which were not originally designated as speeding-related but had crash narratives that suggested speeding as a causative factor. Only 53.4% of crashes designated as speeding-related contained narratives which described speeding as a causative factor. Further investigation of these crashes revealed that the driver contributing code (DCC) of "driving too fast for conditions" was being used in three separate situations. Additionally, this DCC was also incorrectly used when "exceeding the posted speed limit" would likely have been a more appropriate designation. Finally, it was determined that the responding officer only utilized one DCC in 82% of crashes not designated as speeding-related but contained a narrative indicating speed as a contributing causal factor. The use of logistic regression models based upon speeding-related crash typologies offers a promising method by which all possible speeding-related crashes could be identified. Published by Elsevier Ltd.

  7. LS-DYNA Analysis of a Full-Scale Helicopter Crash Test

    Science.gov (United States)

    Annett, Martin S.

    2010-01-01

    A full-scale crash test of an MD-500 helicopter was conducted in December 2009 at NASA Langley's Landing and Impact Research facility (LandIR). The MD-500 helicopter was fitted with a composite honeycomb Deployable Energy Absorber (DEA) and tested under vertical and horizontal impact velocities of 26 ft/sec and 40 ft/sec, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of a system integrated LS-DYNA finite element model. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests was conducted to evaluate the impact performances of various components, including a new crush tube and the DEA blocks. Parameters defined within the system integrated finite element model were determined from these tests. The objective of this paper is to summarize the finite element models developed and analyses performed, beginning with pre-test and continuing through post test validation.

  8. CRASH SAFETY OF A TYPICAL BAY TABLE IN A RAILWAY VEHICLE

    Directory of Open Access Journals (Sweden)

    Emmanuel MATSIKA

    2015-12-01

    Full Text Available Increasingly, urban and high speed trains are incorporating tables (workstations as common railway vehicle interior furniture because passengers prefer seating by bay tables. Among table design characteristics, the most challenging is meeting crashworthiness requirements. Past accident data and sled test results have shown that in the event of railway vehicle frontal impact, occupants located in the bay seating are exposed to chest and abdominal injuries upon contact with tables resulting from secondary collision. In some cases tables have tended to be structurally weak; they easily detach from the side walls and/or floor mounting. Subsequently these become unguided missiles that strike occupants, resulting in injuries. This paper presents an analysis of the crash performance of a typical bay table. The results provide some understanding of the table’s crash safety, giving an indication of its impact aggression. Table materials are characterised using quasi-static compressive tests. In addition, experimental dynamic (impact tests are conducted using a pendulum representing a body block (mass. The results provide information about the possible loading of the table on the occupant in the event of a crash. Contact forces are compared with chest and abdominal injury tolerance thresholds to infer the collision injury potential. Recommendations are then made on design of bay tables to meet the “functional-strength-and-safety balance”.

  9. Cell phone use and traffic crash risk: a culpability analysis.

    Science.gov (United States)

    Asbridge, Mark; Brubacher, Jeff R; Chan, Herbert

    2013-02-01

    The use of a cell phone or communication device while driving is illegal in many jurisdictions, yet evidence evaluating the crash risk associated with cell phone use in naturalistic settings is limited. This article aims to determine whether cell phone use while driving increases motor vehicle crash culpability. Method Drivers involved in crashes where police reported cell phone use (n = 312) and propensity matched drivers (age, sex, suspect alcohol/drug impairment, crash type, date, time of day, geographical location) without cell phone use (n = 936) were drawn from Insurance Corporation of British Columbia Traffic Accident System data. A standardized scoring tool, modified to account for Canadian driving conditions, was used to determine crash culpability from police reports on all drivers from the crashes. The association between crash culpability and cell phone use was determined, with additional subgroup analyses based on crash severity, driver characteristics and type of licence. A comparison of crashes with vs without cell phones revealed an odds ratio of 1.70 (95% confidence interval 1.22-2.36; P = 0.002). This association was consistent after adjustment for matching variables and other covariates. Subgroup analyses demonstrated an association for male drivers, unimpaired drivers, injured and non-injured drivers, and for drivers aged between 26 and 65 years. Crash culpability was found to be significantly associated with cell phone use by drivers, increasing the odds of a culpable crash by 70% compared with drivers who did not use a cell phone. This increased risk was particularly high for middle-aged drivers.

  10. Wrong-way driving crashes on French divided roads.

    Science.gov (United States)

    Kemel, Emmanuel

    2015-02-01

    The objective of divided roads is to increase users' safety by posting unidirectional traffic flows. It happens however that drivers proceed in the wrong direction, endangering themselves as well as other users. The crashes caused by wrong-way drivers are generally spotlighted by the media and call for public intervention. This paper proposes a characterization of wrong-way driving crashes occurring on French divided road on the 2008-2012 period. The objective is to identify the factors that delineate between wrong-way driving crashes and other crashes. Building on the national injury road crash database, 266 crashes involving a wrong-way driver were identified. Their characteristics (related to timing, location, vehicle and driver) are compared to those of the 22,120 other crashes that occurred on the same roads over the same period. The comparison relies on descriptive statistics, completed by a logistic regression. Wrong-way driving crashes are rare but severe. They are more likely to occur during night hours and on non-freeway roads than other crashes. Wrong-way drivers are older, more likely to be intoxicated, to be locals, to drive older vehicles, mainly passenger cars without passengers, than other drivers. The differences observed across networks can help prioritizing public intervention. Most of the identified WW-driving factors deal with cognitive impairment. Therefore, the specific countermeasures such as alternative road signs should be designed for and tested on cognitively impaired drivers. Nevertheless, WW-driving factors are also risk factors for other types of crashes (e.g. elderly driving, drunk driving and age of the vehicle). This suggests that, instead of (or in addition to) developing WW-driving specific countermeasures, managing these risk factors would help reducing a larger number of crashes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Development of a probabilistic safety assessment framework for an interim dry storage facility subjected to an aircraft crash using best-estimate structural analysis

    Energy Technology Data Exchange (ETDEWEB)

    Almomani, Belal; Jang, Dong Chan [Dept. of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Lee, Sang Hoon [Dept. of Mechanical and Automotive Engineering, Keimyung University, Daegu (Korea, Republic of); Kang, Hyun Gook [Dept. of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy (United States)

    2017-03-15

    Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under an aircraft impact is discussed through a numerical structural analysis and an analytical fragility assessment. Sequences of the impact scenario are shown in a developed event tree, with uncertainties considered in the impact analysis and failure probabilities calculated. To evaluate the influence of parameters relevant to design safety, risks are estimated for three specification levels of cask and storage facility structures. The proposed assessment procedure includes the determination of the loading parameters, reference impact scenario, structural response analyses of facility walls, cask containment, and fuel assemblies, and a radiological consequence analysis with dose–risk estimation. The risk results for the proposed scenario in this study are expected to be small relative to those of design basis accidents for best-estimated conservative values. The importance of this framework is seen in its flexibility to evaluate the capability of the facility to withstand an aircraft impact and in its ability to anticipate potential realistic risks; the framework also provides insight into epistemic uncertainty in the available data and into the sensitivity of the design parameters for future research.

  12. Development of a Probabilistic Safety Assessment Framework for an Interim Dry Storage Facility Subjected to an Aircraft Crash Using Best-Estimate Structural Analysis

    Directory of Open Access Journals (Sweden)

    Belal Almomani

    2017-03-01

    Full Text Available Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under an aircraft impact is discussed through a numerical structural analysis and an analytical fragility assessment. Sequences of the impact scenario are shown in a developed event tree, with uncertainties considered in the impact analysis and failure probabilities calculated. To evaluate the influence of parameters relevant to design safety, risks are estimated for three specification levels of cask and storage facility structures. The proposed assessment procedure includes the determination of the loading parameters, reference impact scenario, structural response analyses of facility walls, cask containment, and fuel assemblies, and a radiological consequence analysis with dose–risk estimation. The risk results for the proposed scenario in this study are expected to be small relative to those of design basis accidents for best-estimated conservative values. The importance of this framework is seen in its flexibility to evaluate the capability of the facility to withstand an aircraft impact and in its ability to anticipate potential realistic risks; the framework also provides insight into epistemic uncertainty in the available data and into the sensitivity of the design parameters for future research.

  13. Development of a probabilistic safety assessment framework for an interim dry storage facility subjected to an aircraft crash using best-estimate structural analysis

    International Nuclear Information System (INIS)

    Almomani, Belal; Jang, Dong Chan; Lee, Sang Hoon; Kang, Hyun Gook

    2017-01-01

    Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under an aircraft impact is discussed through a numerical structural analysis and an analytical fragility assessment. Sequences of the impact scenario are shown in a developed event tree, with uncertainties considered in the impact analysis and failure probabilities calculated. To evaluate the influence of parameters relevant to design safety, risks are estimated for three specification levels of cask and storage facility structures. The proposed assessment procedure includes the determination of the loading parameters, reference impact scenario, structural response analyses of facility walls, cask containment, and fuel assemblies, and a radiological consequence analysis with dose–risk estimation. The risk results for the proposed scenario in this study are expected to be small relative to those of design basis accidents for best-estimated conservative values. The importance of this framework is seen in its flexibility to evaluate the capability of the facility to withstand an aircraft impact and in its ability to anticipate potential realistic risks; the framework also provides insight into epistemic uncertainty in the available data and into the sensitivity of the design parameters for future research

  14. Aircraft crash upon a containment structure of a nuclear power plant

    International Nuclear Information System (INIS)

    Paul, D.K.; Abbas, H.; Godbole, P.N.; Nayak, G.C.

    1993-01-01

    The reinforced concrete outer containment of a Nuclear Power Plant (NPP) is required to be designed to withstand the impact of aircraft and aircrash debris etc. The problem is of strategic significance because the damage caused to the structure by these missiles may lead to the leakage of nuclear radiations. The safety design of NPP against aircraft crash requires the evaluation of crash probability. If the probability is smaller than the allowable value then the aircraft crash is neglected as design basis item. Otherwise adequate measures are taken to bring the released radioactive material within the permissible limit. The aircrafts and their striking velocity to be considered in the design of a structure are decided by the accident analysis. The probabilistic aspect of the problem has not been covered in the present work. The non-affordability of coupled analysis of large problems like aircraft crash on NPP, automobile impact on a structure etc. due to the requirement of excessive amount of manual as well as computer time and storage compels us to switch over to the uncoupled analysis. Moreover, the results of coupled analysis are heavily influenced by the analyst's modelling technique and choice of increment size. It is uncoupling of the missile and the target which converts the impact load to the impulse load. This impulse can be found by taking into consideration only the inertial and stiffness properties of missile and considering the target to be rigid. Though the impulse load so obtained disregards the inertial and stiffness characteristics of the target but its effect can be incorporated by modifying it for the inertial and stiffness properties of target at different time steps as we march in time domain during the analysis of the target

  15. The resistance to impact of spent Magnox fuel transport flasks

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    This book completes the papers of the four-year programme of research and demonstrations embarked upon by the CEGB in 1981, culminating in the spectacular train crash at Old Dalby in July 1984. It explains the CEGB's operations in relation to the transportation of spent Magnox fuel. The public tests described in this book are more effective in improving public understanding and confidence than any amount of explanations could have been, raising the wider question of how best the scientific community can respond to the legitimate concerns of the man and woman in the street about the generating of electricity from nuclear power. The contents are: Taking care; irradiated fuel transport in the UK; programming for flask safety; the use of scale models in impact testing; flask analytical studies; drop test facilities; demonstration drop test; a study of flask transport impact hazards; impact of Magnox irradiated fuel transport flasks into rock and concrete; rail crash demonstration scenarios; horizontal impact testing of quarter scale flasks using masonry targets; horizontal crash testing and analysis of model flatrols; flatrol test; analysis of full scale impact into an abutment; analysis of primary impact forces in the train crash demonstration; horizontal impact tests of quarter scale Magnox flasks and stylised model locomotives; predictive estimates for behaviour in the train crash demonstration; design and organization of the crash; execution of the crash demonstration by British Rail; instrumentation for the train crash demonstration; photography for the crash demonstration; a summary of the CEGB's flask accident impact studies

  16. Sawtooth crashes at high beta on JET

    Energy Technology Data Exchange (ETDEWEB)

    Alper, B; Huysmans, G T.A.; Sips, A C.C. [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Nave, M F.F. [Universidade Tecnica, Lisbon (Portugal). Inst. Superior Tecnico

    1994-07-01

    The sawtooth crashes on JET display features which depend on beta. The main observation is a transient bulging of flux surfaces (duration inferior to 30 microsec.), which is predominantly on the low field side and extends to larger radii as beta increases. This phenomenon reaches the plasma boundary when beta{sub N} exceeds 0.5 and in these cases is followed by an ELM within 50 microsec. These sawtooth/ELM events limit plasma performance. Modelling of mode coupling shows qualitative agreement between observations of the structure of the sawtooth precursor and the calculated internal kink mode at high beta. (authors). 6 refs., 5 figs.

  17. Crash testing the largest experiment on Earth

    OpenAIRE

    Cauchi, Marija

    2015-01-01

    Under Europe lies a 27 km tunnel that is both the coldest and hottest place on Earth. The Large Hadron Collider (LHC) has already found out what gives mass to all the matter in the Universe. It is now trying to go even deeper into what makes up everything we see around us. Dr Marija Cauchi writes about her research that helped protect this atom smasher from itself. Photography by Jean Claude Vancell. http://www.um.edu.mt/think/crash-testing-the-largest-experiment-on-earth/

  18. Correlation between crash avoidance maneuvers and injury severity sustained by motorcyclists in single-vehicle crashes.

    Science.gov (United States)

    Wang, Chen; Lu, Linjun; Lu, Jian; Wang, Tao

    2016-01-01

    In order to improve motorcycle safety, this article examines the correlation between crash avoidance maneuvers and injury severity sustained by motorcyclists, under multiple precrash conditions. Ten-year crash data for single-vehicle motorcycle crashes from the General Estimates Systems (GES) were analyzed, using partial proportional odds models (i.e., generalized ordered logit models). The modeling results show that "braking (no lock-up)" is associated with a higher probability of increased severity, whereas "braking (lock-up)" is associated with a higher probability of decreased severity, under all precrash conditions. "Steering" is associated with a higher probability of reduced injury severity when other vehicles are encroaching, whereas it is correlated with high injury severity under other conditions. "Braking and steering" is significantly associated with a higher probability of low severity under "animal encounter and object presence," whereas it is surprisingly correlated with high injury severity when motorcycles are traveling off the edge of the road. The results also show that a large number of motorcyclists did not perform any crash avoidance maneuvers or conducted crash avoidance maneuvers that are significantly associated with high injury severity. In general, this study suggests that precrash maneuvers are an important factor associated with motorcyclists' injury severity. To improve motorcycle safety, training/educational programs should be considered to improve safety awareness and adjust driving habits of motorcyclists. Antilock brakes and such systems are also promising, because they could effectively prevent brake lock-up and assist motorcyclists in maneuvering during critical conditions. This study also provides valuable information for the design of motorcycle training curriculum.

  19. Two-fractal overlap time series: Earthquakes and market crashes

    Indian Academy of Sciences (India)

    velocity over the other and time series of stock prices. An anticipation method for some of the crashes have been proposed here, based on these observations. Keywords. Cantor set; time series; earthquake; market crash. PACS Nos 05.00; 02.50.-r; 64.60; 89.65.Gh; 95.75.Wx. 1. Introduction. Capturing dynamical patterns of ...

  20. Drug and alcohol crash risk : a case-control study.

    Science.gov (United States)

    2016-12-01

    This study used a case-control design to estimate the risk of crashes involving drivers using drugs, alcohol or both. Data was collected in Virginia Beach, Virginia, for 20 months. The study obtained biological measures on more than 3,000 crash...

  1. In pedestrian crashes, it's vehicle speed that matters the most

    Science.gov (United States)

    2000-05-13

    A recently prepared report on pedestrian injuries provides these two main findings: 1) regardless of age, pedestrians involved in crashes are more likely to be killed as vehicle speeds increase; and 2) in crashes at any speed, older pedestrians are m...

  2. Prediction equation for vehicle-pedestrian crash and safety analysis ...

    African Journals Online (AJOL)

    The occurrences of vehicle-pedestrian crashes at signalized intersections were investigated using a 3 year (2004-2006) crash records of 82 signalized intersections in Accra, Kumasi, Tema, Sekondi-Takoradi and Tamale. The data were analyzed using Micro-computer Accident Analysis Package. Traffic flow characteristics ...

  3. Analysis of Traffic Crash Data in Kentucky (2012-2016).

    Science.gov (United States)

    2017-09-01

    This report documents an analysis of traffic crash data in Kentucky for the years of 2012 through 2016. A primary objective of this study was to determine average crash statistics for Kentucky highways. Rates were calculated for various types of high...

  4. Analysis of traffic crash data in Kentucky (2009-2013).

    Science.gov (United States)

    2014-09-01

    This report documents an analysis of traffic crash data in Kentucky for the years of 2009 through 2013. A primary objective of this study was to determine average crash statistics for Kentucky highways. Rates were calculated for various types of high...

  5. Robust collaborative process interactions under system crash and network failures

    NARCIS (Netherlands)

    Wang, Lei; Wombacher, Andreas; Ferreira Pires, Luis; van Sinderen, Marten J.; Chi, Chihung

    2013-01-01

    With the possibility of system crashes and network failures, the design of robust client/server interactions for collaborative process execution is a challenge. If a business process changes its state, it sends messages to the relevant processes to inform about this change. However, server crashes

  6. Social costs of road crashes : an international analysis.

    NARCIS (Netherlands)

    Wijnen, W. & Stipdonk, H.L.

    2016-01-01

    This paper provides an international overview of the most recent estimates of the social costs of road crashes: total costs, value per casualty and breakdown in cost components. The analysis is based on publications about the national costs of road crashes of 17 countries, of which ten high income

  7. Road Crashes in Addis Ababa, Ethiopia: Empirical Findings ...

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    studies on road crashes forecasted road traffic fatalities to be the second ... Ethiopia's capital city – shares 60% out of the total number of vehicles in the ... network density and vehicle ownership, the country (Ethiopia) has been cited as ... crash related injury case confirmation. ..... to thank you in advance for your cooperation!

  8. An Observing System Simulation Experiment (OSSE to Assess the Impact of Doppler Wind Lidar (DWL Measurements on the Numerical Simulation of a Tropical Cyclone

    Directory of Open Access Journals (Sweden)

    Lei Zhang

    2010-01-01

    Full Text Available The importance of wind observations has been recognized for many years. However, wind observations—especially three-dimensional global wind measurements—are very limited. A satellite-based Doppler Wind Lidar (DWL is proposed to measure three-dimensional wind profiles using remote sensing techniques. Assimilating these observations into a mesoscale model is expected to improve the performance of the numerical weather prediction (NWP models. In order to examine the potential impact of the DWL three-dimensional wind profile observations on the numerical simulation and prediction of tropical cyclones, a set of observing simulation system experiments (OSSEs is performed using the advanced research version of the Weather Research and Forecasting (WRF model and its three-dimensional variational (3DVAR data assimilation system. Results indicate that assimilating the DWL wind observations into the mesoscale numerical model has significant potential for improving tropical cyclone track and intensity forecasts.

  9. Failure analysis of parameter-induced simulation crashes in climate models

    Science.gov (United States)

    Lucas, D. D.; Klein, R.; Tannahill, J.; Ivanova, D.; Brandon, S.; Domyancic, D.; Zhang, Y.

    2013-08-01

    Simulations using IPCC (Intergovernmental Panel on Climate Change)-class climate models are subject to fail or crash for a variety of reasons. Quantitative analysis of the failures can yield useful insights to better understand and improve the models. During the course of uncertainty quantification (UQ) ensemble simulations to assess the effects of ocean model parameter uncertainties on climate simulations, we experienced a series of simulation crashes within the Parallel Ocean Program (POP2) component of the Community Climate System Model (CCSM4). About 8.5% of our CCSM4 simulations failed for numerical reasons at combinations of POP2 parameter values. We applied support vector machine (SVM) classification from machine learning to quantify and predict the probability of failure as a function of the values of 18 POP2 parameters. A committee of SVM classifiers readily predicted model failures in an independent validation ensemble, as assessed by the area under the receiver operating characteristic (ROC) curve metric (AUC > 0.96). The causes of the simulation failures were determined through a global sensitivity analysis. Combinations of 8 parameters related to ocean mixing and viscosity from three different POP2 parameterizations were the major sources of the failures. This information can be used to improve POP2 and CCSM4 by incorporating correlations across the relevant parameters. Our method can also be used to quantify, predict, and understand simulation crashes in other complex geoscientific models.

  10. School start times and teenage driver motor vehicle crashes.

    Science.gov (United States)

    Foss, Robert D; Smith, Richard L; O'Brien, Natalie P

    2018-04-26

    Shifting school start times to 8:30 am or later has been found to improve academic performance and reduce behavior problems. Limited research suggests this may also reduce adolescent driver motor vehicle crashes. A change in the school start time from 7:30 am to 8:45 am for all public high schools in one North Carolina county presented the opportunity to address this question with greater methodologic rigor. We conducted ARIMA interrupted time-series analyses to examine motor vehicle crash rates of high school age drivers in the intervention county and 3 similar comparison counties with comparable urban-rural population distribution. To focus on crashes most likely to be affected, we limited analysis to crashes involving 16- & 17-year-old drivers occurring on days when school was in session. In the intervention county, there was a 14% downward shift in the time-series following the 75 min delay in school start times (p = .076). There was no change approaching statistical significance in any of the other three counties. Further analysis indicated marked, statistically significant shifts in hourly crash rates in the intervention county, reflecting effects of the change in school start time on young driver exposure. Crashes from 7 to 7:59 am decreased sharply (-25%, p = .008), but increased similarly from 8 to 8:59 am (21%, p = .004). Crashes from 2 to 2:59 pm declined dramatically (-48%, p = .000), then increased to a lesser degree from 3 to 3:59 pm (32%, p = .024) and non-significantly from 4 to 4:59 (19%, p = .102). There was no meaningful change in early morning or nighttime crashes, when drowsiness-induced crashes might have been expected to be most common. The small decrease in crashes among high school age drivers following the shift in school start time is consistent with the findings of other studies of teen driver crashes and school start times. All these studies, including the present one, have limitations, but the similar

  11. Aircraft crash protection from a military engineering point of view

    International Nuclear Information System (INIS)

    Lynch, J.P.

    1975-01-01

    The general problem is to investigate the situation of an aircraft crash on a reactor building. One aspect of the problem is to determine if the structural conditions required to protect the environment against the results of an impact at the center of a 10 m by 10 m reinforced concrete wall slab are reasonable. This paper discusses the dynamic structural response problem, using the analytical methods developed for military structures designed to resist blast loading. The military protection problem is quite similar to reactor protection in that extensive analysis is required to define the threat or loading conditions. The post-dynamic-loading structural requirements must also be defined, since every possible source of resistance is used to obtain a structure which protects against the stated threat at the lowest cost. Such a structural design contains the lowest possible factor of safety, using reasonable analytical techniques, and is more properly called collapse design. If more protection is provided than required, the cost will be greater than necessary. An aircraft jet engine impact is selected as the loading condition for the protection requirements of the reactor wall panel. Analytical investigation of the impact indicates that the load function can be reasonably well approximated by the half sine wave pressure-time curve. Thus, the maximum pressure and duration of the half sine pressure pulse completely define the load-time history. (orig./HP) [de

  12. Multi-axial model of anisotropic damage: numerical management of failure and application to the ruin of reinforced concrete structures under impact

    International Nuclear Information System (INIS)

    Leroux, A.

    2012-01-01

    The objective of this research thesis is to develop the most precise possible numeric modelling of reinforced concrete behaviour with application to the design of structures of protection of nuclear plants against violent dynamic loadings (explosions, impacts). After a discussion of existing models, of their benefits and weaknesses, a multi-axial model of anisotropic damage is proposed and implemented with the finite element method. A new procedure of failure management is also proposed which allows the induced anisotropic damage to be taken into account. Impact tests on concrete beams and concrete cubes with longitudinal steel have been performed in order to validate the model [fr

  13. The Effects of Curtain Airbag on Occupant Kinematics and Injury Index in Rollover Crash

    Directory of Open Access Journals (Sweden)

    Hongyun Li

    2018-01-01

    Full Text Available Background. Occupant injuries in rollover crashes are associated with vehicle structural performance, as well as the restraint system design. For a better understanding of the occupant kinematics and injury index in certain rollover crash, it is essential to carry out dynamic vehicle rollover simulation with dummy included. Objective. This study focused on effects of curtain airbag (CAB parameters on occupant kinematics and injury indexes in a rollover crash. Besides, optimized parameters of the CAB were proposed for the purpose of decreasing the occupant injuries in such rollover scenario. Method and Material. The vehicle motion from the physical test was introduced as the input for the numerical simulation, and the 50% Hybrid III dummy model from the MADYMO database was imported into a simulation model. The restraint system, including a validated CAB module, was introduced for occupant kinematics simulation and injury evaluation. TTF setting, maximum inflator pressure, and protection area of the CAB were analysed. Results. After introducing the curtain airbag, the maximum head acceleration was reduced from 91.60 g to 49.52 g, and the neck Mx and neck Fz were reduced significantly. Among these CAB parameters, the TTF setting had the largest effect on the head acceleration which could reduce 8.6 g furthermore after optimization. The neck Fz was decreased from 3766.48 N to 2571.77 N after optimization of CAB protection area. Conclusions. Avoiding hard contact is critical for the occupant protection in the rollover crashes. The simulation results indicated that occupant kinematics and certain injury indexes were improved with the help of CAB in such rollover scenario. Appropriate TTF setting and inflator selection could benefit occupant kinematics and injury indexes. Besides, it was advised to optimize the curtain airbag thickness around the head contact area to improve head and neck injury indexes.

  14. The October 2014 United States Treasury bond flash crash and the contributory effect of mini flash crashes.

    Directory of Open Access Journals (Sweden)

    Zachary S Levine

    Full Text Available We investigate the causal uncertainty surrounding the flash crash in the U.S. Treasury bond market on October 15, 2014, and the unresolved concern that no clear link has been identified between the start of the flash crash at 9:33 and the opening of the U.S. equity market at 9:30. We consider the contributory effect of mini flash crashes in equity markets, and find that the number of equity mini flash crashes in the three-minute window between market open and the Treasury Flash Crash was 2.6 times larger than the number experienced in any other three-minute window in the prior ten weekdays. We argue that (a this statistically significant finding suggests that mini flash crashes in equity markets both predicted and contributed to the October 2014 U.S. Treasury Bond Flash Crash, and (b mini-flash crashes are important phenomena with negative externalities that deserve much greater scholarly attention.

  15. The October 2014 United States Treasury bond flash crash and the contributory effect of mini flash crashes.

    Science.gov (United States)

    Levine, Zachary S; Hale, Scott A; Floridi, Luciano

    2017-01-01

    We investigate the causal uncertainty surrounding the flash crash in the U.S. Treasury bond market on October 15, 2014, and the unresolved concern that no clear link has been identified between the start of the flash crash at 9:33 and the opening of the U.S. equity market at 9:30. We consider the contributory effect of mini flash crashes in equity markets, and find that the number of equity mini flash crashes in the three-minute window between market open and the Treasury Flash Crash was 2.6 times larger than the number experienced in any other three-minute window in the prior ten weekdays. We argue that (a) this statistically significant finding suggests that mini flash crashes in equity markets both predicted and contributed to the October 2014 U.S. Treasury Bond Flash Crash, and (b) mini-flash crashes are important phenomena with negative externalities that deserve much greater scholarly attention.

  16. Mechanisms and factors involved in hip injuries during frontal crashes.

    Science.gov (United States)

    Yoganandan, N; Pintar, F A; Gennarelli, T A; Maltese, M R; Eppinger, R H

    2001-11-01

    This study was conducted to collect data and gain insights relative to the mechanisms and factors involved in hip injuries during frontal crashes and to study the tolerance of hip injuries from this type of loading. Unembalmed human cadavers were seated on a standard automotive seat (reinforced) and subjected to knee impact test to each lower extremity. Varying combinations of flexion and adduction/abduction were used for initial alignment conditions and pre-positioning. Accelerometers were fixed to the iliac wings and twelfth thoracic vertebral spinous process. A 23.4-kg padded pendulum impacted the knee at velocities ranging from 4.3 to 7.6 m/s. The impacting direction was along the anteroposterior axis, i.e., the global X-axis, in the body-fixed coordinate system. A load cell on the front of the pendulum recorded the impact force. Peak impact forces ranged from 2,450 to 10,950 N. The rate of loading ranged from 123 to 7,664 N/msec. The impulse values ranged from 12.4 to 31.9 Nsec. Injuries were not apparent in three tests. Eight tests resulted in trauma. Fractures involving the pelvis including the acetabulum and proximal femur occurred in five out of the eight tests, and distal femoral bone fracture occurred in one test. These results underscore the importance of leg pre-positioning and the orientation of the impacting axis to produce specific types of trauma to the pelvic region of the lower extremity.

  17. Gasoline prices and traffic crashes in Alabama, 1999-2009.

    Science.gov (United States)

    Chi, Guangqing; McClure, Timothy E; Brown, David B

    2012-09-01

    The price of gasoline has been found to be negatively associated with traffic crashes in a limited number of studies. However, most of the studies have focused either on fatal crashes only or on all crashes but measured over a very short time period. In this study, we examine gasoline price effects on all traffic crashes by demographic groups in the state of Alabama from 1999 to 2009. Using negative binomial regression techniques to examine monthly data from 1999 to 2009 in the state of Alabama, we estimate the effects of changes in gasoline price on changes in automobile crashes. We also examine how these effects differ by age group (16-20, 21-25, 26-30, 31-64, and 65+), gender (male and female), and race/ethnicity (non-Hispanic white, non-Hispanic black, and Hispanic). The results show that gasoline prices have both short-term and long-term effects on reducing total traffic crashes and crashes of each age, gender, and race/ethnicity group (except Hispanic due to data limitations). The short-term and long-term effects are not statistically different for each individual demographic group. Gasoline prices have a stronger effect in reducing crashes involving drivers aged 16 to 20 than crashes involving drivers aged 31 to 64 and 65+ in the short term; the effects, however, are not statistically different across other demographic groups. Although gasoline price increases are not favored, our findings show that gasoline price increases (or decreases) are associated with reductions (or increases) in the incidence of traffic crashes. If gasoline prices had remained at the 1999 level of $1.41 from 1999 to 2009, applying the estimated elasticities would result in a predicted increase in total crashes of 169,492 (or 11.3%) from the actual number of crashes. If decision makers wish to reduce traffic crashes, increasing gasoline taxes is a possible option-however, doing so would increase travel costs and lead to equity concerns. These findings may help to shape transportation

  18. Crashes and near-crashes on horizontal curves along rural two-lane highways: Analysis of naturalistic driving data.

    Science.gov (United States)

    Wang, Bo; Hallmark, Shauna; Savolainen, Peter; Dong, Jing

    2017-12-01

    Prior research has shown the probability of a crash occurring on horizontal curves to be significantly higher than on similar tangent segments, and a disproportionally higher number of curve-related crashes occurred in rural areas. Challenges arise when analyzing the safety of horizontal curves due to imprecision in integrating information as to the temporal and spatial characteristics of each crash with specific curves. The second Strategic Highway Research Program(SHRP 2) conducted a large-scale naturalistic driving study (NDS),which provides a unique opportunity to better understand the contributing factors leading to crash or near-crash events. This study utilizes high-resolution behavioral data from the NDS to identify factors associated with 108 safety critical events (i.e., crashes or near-crashes) on rural two-lane curves. A case-control approach is utilized wherein these events are compared to 216 normal, baseline-driving events. The variables examined in this study include driver demographic characteristics, details of the traffic environment and roadway geometry, as well as driver behaviors such as in-vehicle distractions. Logistic regression models are estimated to discern those factors affecting the likelihood of a driver being crash-involved. These factors include high-risk behaviors, such as speeding and visual distractions, as well as curve design elements and other roadway characteristics such as pavement surface conditions. This paper successfully integrated driver behavior, vehicle characteristics, and roadway environments into the same model. Logistic regression model was found to be an effective way to investigate crash risks using naturalistic driving data. This paper revealed a number of contributing factors to crashes on rural two-lane curves, which has important implications in traffic safety policy and curve geometry design. This paper also discussed limitations and lessons learned from working with the SHRP 2 NDS data. It will benefit

  19. Numerical relativity

    International Nuclear Information System (INIS)

    Piran, T.

    1982-01-01

    There are many recent developments in numerical relativity, but there remain important unsolved theoretical and practical problems. The author reviews existing numerical approaches to solution of the exact Einstein equations. A framework for classification and comparison of different numerical schemes is presented. Recent numerical codes are compared using this framework. The discussion focuses on new developments and on currently open questions, excluding a review of numerical techniques. (Auth.)

  20. Influence of the aircraft crash induced local nonlinearities on the overall dynamic response of a RC structure through a parametric study

    International Nuclear Information System (INIS)

    Rouzaud, C.; Gatuingt, F.; Hervé, G.; Moussallam, N.; Dorival, O.

    2016-01-01

    Highlights: • Structures could resist to the induced accelerations which they might undergo. • The characterization of non-linearities in the signal of an aircraft impact. • The non linear impact area are studied through a sensitivity analysis. • This analysis should allow to achieve a link between aircraft impact parameters. - Abstract: In the process of nuclear power plant design, the safety of structures is an important aspect. Civil engineering structures have to resist the accelerations induced by, for example, seismic loads or shaking loads resulting from the aircraft impact. This is even more important for the in-structures equipments that have also to be qualified against the vibrations generated by this kind of hazards. In the case of aircraft crash, as a large variety of scenarios has to be envisaged, it is necessary to use methods that are less CPU-time consuming and that consider appropriately the nonlinearities. The analysis presented in this paper deals with the problem of the characterization of nonlinearities (damaged area, transmitted force) in the response of a structure subjected to an aircraft impact. The purpose of our study is part of the development of a new decoupled nonlinear and elastic way for calculating the shaking of structures following an aircraft impact which could be very numerically costly if studied with classical finite element methods. The aim is to identify which parameters control the dimensions of the nonlinear zone and so will have a direct impact on the induced vibrations. In a design context, several load cases (and simulations) are analyzed in order to consider a wide range of impact (different loading surfaces, momentum) and data sets of the target (thickness, reinforcements). In this work, the nonlinear area generated by the impact is localized and studied through a parametric analysis associated with a sensitivity analysis to identify the boundaries between the elastic domain and this nonlinear area.

  1. Exploratory multinomial logit model-based driver injury severity analyses for teenage and adult drivers in intersection-related crashes.

    Science.gov (United States)

    Wu, Qiong; Zhang, Guohui; Ci, Yusheng; Wu, Lina; Tarefder, Rafiqul A; Alcántara, Adélamar Dely

    2016-05-18

    Teenage drivers are more likely to be involved in severely incapacitating and fatal crashes compared to adult drivers. Moreover, because two thirds of urban vehicle miles traveled are on signal-controlled roadways, significant research efforts are needed to investigate intersection-related teenage driver injury severities and their contributing factors in terms of driver behavior, vehicle-infrastructure interactions, environmental characteristics, roadway geometric features, and traffic compositions. Therefore, this study aims to explore the characteristic differences between teenage and adult drivers in intersection-related crashes, identify the significant contributing attributes, and analyze their impacts on driver injury severities. Using crash data collected in New Mexico from 2010 to 2011, 2 multinomial logit regression models were developed to analyze injury severities for teenage and adult drivers, respectively. Elasticity analyses and transferability tests were conducted to better understand the quantitative impacts of these factors and the teenage driver injury severity model's generality. The results showed that although many of the same contributing factors were found to be significant in the both teenage and adult driver models, certain different attributes must be distinguished to specifically develop effective safety solutions for the 2 driver groups. The research findings are helpful to better understand teenage crash uniqueness and develop cost-effective solutions to reduce intersection-related teenage injury severities and facilitate driver injury mitigation research.

  2. Severe injury in multiple impacts: Analysis of 1997-2015 NASS-CDS.

    Science.gov (United States)

    Viano, David C; Parenteau, Chantal S

    2018-07-04

    This is a descriptive study of the incidence and risk for severe injury in single-impact and multi-impact crashes by belt use and crash type using NASS-CDS. 1997-2015 NASS-CDS data were used to determine the distribution of crashes by the number of impacts and severe injury (Maximum Abbreviated Injury Score [MAIS] 4+F) to >15-year-old nonejected drivers by seat belt use in 1997+ MY vehicles. It compares the risk for severe injury in a single impact and in crashes involving 2, 3, or 4+ impacts in the collision with a focus on a frontal crash followed by other impacts. Most vehicle crashes involve a single impact (75.4% of 44,889,518 vehicles), followed by 2-impact crashes (19.6%), 3-impact crashes (5.0%) and 4+ impacts (2.6%). For lap-shoulder-belted drivers, the distribution of severe injury was 42.1% in a single impact, 29.3% in 2 impacts, 13.4% in 3 impacts, and 15.1% in 4+ impact crashes. The risk for a belted driver was 0.256 ± 0.031% in a single impact, 0.564 ± 0.079% in 2 impacts, 0.880 ± 0.125% in 3 impacts, and 2.121 ± 0.646% in 4+ impact. The increase in risk from a single crash to multi-impact collisions was statistically significant (P impact, 53.8% of belted drivers were in a frontal crashes, 22.4% in side crashes, 20% in rear crashes, and 1.7% in rollover crashes. The risk for severe injury was highest in a rollover at 0.677 ± 0.250%, followed by near-side impact at 0.467 ± 0.084% and far-side impact at 0.237 ± 0.071%. Seat belt use was 82.4% effective in preventing severe injury (MAIS 4+F) in a rollover, 47.9% in a near-side impact, and 74.8% in a far-side impact. In 2-impact crashes with a belted driver, the most common sequence was a rear impact followed by a frontal crash at 1,843,506 (21.5%) with a risk for severe injury of 0.100 ± 0.058%. The second most common was a frontal impact followed by another frontal crash at 1,257,264 (14.7%) with a risk of 0.401 ± 0.057%. The risk was 0.658 ± 0.271% in a frontal impact followed by a rear

  3. Modeling crash injury severity by road feature to improve safety.

    Science.gov (United States)

    Penmetsa, Praveena; Pulugurtha, Srinivas S

    2018-01-02

    The objective of this research is 2-fold: to (a) model and identify critical road features (or locations) based on crash injury severity and compare it with crash frequency and (b) model and identify drivers who are more likely to contribute to crashes by road feature. Crash data from 2011 to 2013 were obtained from the Highway Safety Information System (HSIS) for the state of North Carolina. Twenty-three different road features were considered, analyzed, and compared with each other as well as no road feature. A multinomial logit (MNL) model was developed and odds ratios were estimated to investigate the effect of road features on crash injury severity. Among the many road features, underpass, end or beginning of a divided highway, and on-ramp terminal on crossroad are the top 3 critical road features. Intersection crashes are frequent but are not highly likely to result in severe injuries compared to critical road features. Roundabouts are least likely to result in both severe and moderate injuries. Female drivers are more likely to be involved in crashes at intersections (4-way and T) compared to male drivers. Adult drivers are more likely to be involved in crashes at underpasses. Older drivers are 1.6 times more likely to be involved in a crash at the end or beginning of a divided highway. The findings from this research help to identify critical road features that need to be given priority. As an example, additional advanced warning signs and providing enlarged or highly retroreflective signs that grab the attention of older drivers may help in making locations such as end or beginning of a divided highway much safer. Educating drivers about the necessary skill sets required at critical road features in addition to engineering solutions may further help them adopt safe driving behaviors on the road.

  4. Drug and Alcohol Involvement in Four Types of Fatal Crashes*

    Science.gov (United States)

    Romano, Eduardo; Voas, Robert B.

    2011-01-01

    Objective: The aim of this study was to explore the relationship of drunk and drugged driving to the occurrence of fatal crashes associated with speeding, failure to obey/yield, inattention, and seat belt nonuse. Method: We examined data for fatally injured drivers involved in single-vehicle crashes killed in states in which more than 79% of the drivers were tested for drugs other than alcohol and had a known result. Results: About 25% of the drivers tested positive for drugs, a figure almost double that estimated by the 2007 National Roadside Survey. Cannabinoids and stimulants each contributed to about 23% of the drug-positive results (6% among all fatally injured single-vehicle drivers). Stimulants more than cannabinoids were found to be associated with the four types of crashes under study. Some drugs showed a protective effect over the four crash types under study. Significant interactions between drugs and alcohol were observed. Stimulants contributed to the different types of fatal crashes irrespective of the levels of alcohol consumed by the drivers. Conclusions: This study provides further evidence of a link between drug consumption and fatal crashes. It also opens the door to some interesting and sometimes unexpected questions regarding the way drugs contribute to crashes, which we found varies depending on the type of crash considered, the class of drug, and the presence of alcohol. Research is also needed on drugs that could have a protective effect on the occurrence of fatal crashes. These findings could be highly relevant to the design of drug-related traffic laws and programs targeted at curbing drugged driving. PMID:21683038

  5. A Numerical Study of the Impact of Radial Baffles in solid Bowl Centrifuges Using computational Fluid Dynamics

    OpenAIRE

    Romani, Xiana; Nirschl, Hermann

    2010-01-01

    Centrifugal separation equipment, such as solid bowl centrifuges, is used to carry out an effective separation of fine particles from industrial fluids. Knowledge of the streams and sedimentation behavior inside solid bowl centrifuges is necessary to determine the geometry and the process parameters that lead to an optimal performance. Regarding a given industrial centrifuge geometry, a grid was built to calculate numerically the multiphase flow of water, air, and particles with a computation...

  6. Rear seat safety: Variation in protection by occupant, crash and vehicle characteristics.

    Science.gov (United States)

    Durbin, Dennis R; Jermakian, Jessica S; Kallan, Michael J; McCartt, Anne T; Arbogast, Kristy B; Zonfrillo, Mark R; Myers, Rachel K

    2015-07-01

    Current information on the safety of rear row occupants of all ages is needed to inform further advances in rear seat restraint system design and testing. The objectives of this study were to describe characteristics of occupants in the front and rear rows of model year 2000 and newer vehicles involved in crashes and determine the risk of serious injury for restrained crash-involved rear row occupants and the relative risk of fatal injury for restrained rear row vs. front passenger seat occupants by age group, impact direction, and vehicle model year. Data from the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) and Fatality Analysis Reporting System (FARS) were queried for all crashes during 2007-2012 involving model year 2000 and newer passenger vehicles. Data from NASS-CDS were used to describe characteristics of occupants in the front and rear rows and to determine the risk of serious injury (AIS 3+) for restrained rear row occupants by occupant age, vehicle model year, and impact direction. Using a combined data set containing data on fatalities from FARS and estimates of the total population of occupants in crashes from NASS-CDS, logistic regression modeling was used to compute the relative risk (RR) of death for restrained occupants in the rear vs. front passenger seat by occupant age, impact direction, and vehicle model year. Among all vehicle occupants in tow-away crashes during 2007-2012, 12.3% were in the rear row where the overall risk of serious injury was 1.3%. Among restrained rear row occupants, the risk of serious injury varied by occupant age, with older adults at the highest risk of serious injury (2.9%); by impact direction, with rollover crashes associated with the highest risk (1.5%); and by vehicle model year, with model year 2007 and newer vehicles having the lowest risk of serious injury (0.3%). Relative risk of death was lower for restrained children up to age 8 in the rear compared with passengers in the right

  7. Fatigue-related crashes involving express buses in Malaysia: will the proposed policy of banning the early-hour operation reduce fatigue-related crashes and benefit overall road safety?

    Science.gov (United States)

    Mohamed, Norlen; Mohd-Yusoff, Mohammad-Fadhli; Othman, Ilhamah; Zulkipli, Zarir-Hafiz; Osman, Mohd Rasid; Voon, Wong Shaw

    2012-03-01

    Fatigue-related crashes have long been the topic of discussion and study worldwide. The relationship between fatigue-related crashes and time of day is well documented. In Malaysia, the possibility of banning express buses from operating during the early-hours of the morning has emerged as an important consideration for passenger safety. This paper highlights the findings of an impact assessment study. The study was conducted to determine all possible impacts prior to the government making any decision on the proposed banning. This study is an example of a simple and inexpensive approach that may influence future policy-making process. The impact assessment comprised two major steps. The first step involved profiling existing operation scenarios, gathering information on crashes involving public express buses and stakeholders' views. The second step involved a qualitative impact assessment analysis using all information gathered during the profiling stage to describe the possible impacts. Based on the assessment, the move to ban early-hour operations could possibly result in further negative impacts on the overall road safety agenda. These negative impacts may occur if the fundamental issues, such as driving and working hours, and the need for rest and sleep facilities for drivers, are not addressed. In addition, a safer and more accessible public transportation system as an alternative for those who choose to travel at night would be required. The proposed banning of early-hour operations is also not a feasible solution for sustainability of express bus operations in Malaysia, especially for those operating long journeys. The paper concludes by highlighting the need to design a more holistic approach for preventing fatigue-related crashes involving express buses in Malaysia. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Minor Crashes and ‘Whiplash’ in the United States

    OpenAIRE

    Bartsch, Adam J.; Gilbertson, Lars G.; Prakash, Vikas; Morr, Douglas R.; Wiechel, John F.

    2008-01-01

    In the United States there is currently a paucity of available real world minor rear crash data with struck vehicle delta-V, or speed change, less than or equal to 15 kilometers per hour. These data are essential as researchers attempt to define ‘whiplash’ injury risk potential in these minor crashes. This study analyzed a new set of 105 U.S. minor rear aligned crashes between passenger vehicles. Mean struck vehicle delta-V and acceleration were 6.3 km/h (s.d. = 2.1 km/h) and 1.4g (s.d. = 0.5...

  9. Projecting Fatalities in Crashes Involving Older Drivers, 2000-2025

    Energy Technology Data Exchange (ETDEWEB)

    Hu, P.S.

    2001-03-23

    As part of this research effort, we developed a new methodology for projecting elderly traffic crash fatalities. This methodology separates exposure to crashes from crash risk per se, and further divides exposure into two components, the number of miles driven and the likelihood of being a driver. This component structure permits conceptually different determinants of traffic fatalities to be projected separately and has thorough motivation in behavioral theory. It also permits finer targeting of particular aspects of projections that need improvement and closer linking of projections to possible policy instruments for influencing them.

  10. Construct exploit constraint in crash analysis by bypassing canary

    Science.gov (United States)

    Huang, Ning; Huang, Shuguang; Huang, Hui; Chang, Chao

    2017-08-01

    Selective symbolic execution is a common program testing technology. Developed on the basis of it, some crash analysis systems are often used to test the fragility of the program by constructing exploit constraints, such as CRAX. From the study of crash analysis based on symbolic execution, this paper find that this technology cannot bypass the canary stack protection mechanisms. This paper makes the improvement uses the API hook in Linux. Experimental results show that the use of API hook can effectively solve the problem that crash analysis cannot bypass the canary protection.

  11. Rib and sternum fractures in the elderly and extreme elderly following motor vehicle crashes.

    Science.gov (United States)

    Bansal, Vishal; Conroy, Carol; Chang, David; Tominaga, Gail T; Coimbra, Raul

    2011-05-01

    As the population ages, the need to protect the elderly during motor vehicle crashes becomes increasingly critical. This study focuses on causation of elderly rib and sternum fractures in seriously injured elderly occupants involved in motor vehicle crashes. We used data from the Crash Injury Research and Engineering Network (CIREN) database (1997-2009). Study case criteria included occupant (≥ 65 years old) drivers (sitting in the left outboard position of the first row) or passengers (sitting in the first row right outboard position) who were in frontal or side impacts. To avoid selection bias, only occupants with a Maximum Abbreviated Injury Scale (MAIS) 3 (serious) or greater severity injury were included in this study. Odds ratios were used as a descriptive measure of the strength of association between variables and Chi square tests were used to determine if there was a statistically significant relationship between categorical variables. Of the 211 elderly (65-79 years old) occupants with thoracic injury, 92.0% had rib fractures and 19.6% had sternum fractures. For the 76 extreme elderly (80 years or older) with thoracic injury, 90.4% had rib fractures and 27.7% had sternum fractures. Except for greater mortality and more rib fractures caused by safety belts, there were no differences between the extreme elderly and the elderly occupants. Current safety systems may need to be redesigned to prevent rib and sternum fractures in occupants 80 years and older. Copyright © 2010 Elsevier Ltd. All rights reserved.

  12. Changes in depression stigma after the Germanwings crash - Findings from German population surveys.

    Science.gov (United States)

    von dem Knesebeck, Olaf; Mnich, Eva; Angermeyer, Matthias C; Kofahl, Christopher; Makowski, Anna

    2015-11-01

    Media coverage of the Germanwings plane crash intensely focused on the co-pilot's mental illness and was criticized for potentially increasing depression stigma. We explored whether stigma beliefs towards persons with depression changed in April 2015 (about one month after the crash) compared to 2014. Telephone surveys among the adult population were conducted in Munich, Germany (N=650 in 2014 and N=601 in 2015). In both surveys, four components of stigma were assessed: (1) characteristics ascribed to persons with a depression, (2) belief in a continuum of symptoms from mental health to mental illness, (3) emotional reactions to people afflicted by depression (fear, anger, and pro-social reactions), and (4) desire for social distance. Some stigmatizing attitudes have increased after the crash. More specifically, we found more pronounced changes in the attributes ascribed (stereotypes) and in the perceived separation from persons afflicted (continuum beliefs) than in the emotional reactions and the desire for social distance. However, overall increase in depression stigma was smaller than expected as changes were not statistically significant in the majority of the analyzed items. Due to the study design no causal interpretation of results is possible. Moreover, evidence presented is confined to a regional German sample. A single devastating event and related media coverage seem to have a limited impact on public stigmatizing attitudes. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Numerical Prediction of the Impact of Non-Uniform Leading Edge Coatings On the Aerodynamic Performance of Compressor Airfoils

    National Research Council Canada - National Science Library

    Elmstrom, Michael

    2004-01-01

    A computational fluid dynamic (CFD) investigation is presented that provides predictions of the aerodynamic impact of uniform and non-uniform coatings applied to the leading edge of a compressor airfoil in a cascade. Using a NACA 65(12...

  14. Numerical Simulation of Adiabatic Shear Bands in Ti-6Al-4V Alloy Due to Fragment Impact

    National Research Council Canada - National Science Library

    Fermen-Coker, Muege

    2004-01-01

    ... and lethality technologies for the Army's Future Combat Systems. Onset and propagation of adiabatic shear bands are investigated both experimentally and computationally by studying the ballistic impact of 20-mm steel fragments against Ti-6Al-4V plates...

  15. Numerical simulation of projectile impact on mild steel armour plates using LS-DYNA, Part II: Parametric studies

    OpenAIRE

    Raguraman, M; Deb, A; Gupta, NK; Kharat, DK

    2008-01-01

    In Part I of the current two-part series, a comprehensive simulation-based study of impact of Jacketed projectiles on mild steel armour plates has been presented. Using the modelling procedures developed in Part I, a number of parametric studies have been carried out for the same mild steel plates considered in Part I and reported here in Part II. The current investigation includes determination of ballistic limits of a given target plate for different projectile diameters and impact velociti...

  16. Numerical Simulation of Projectile Impact on Mild Steel Armour Platesusing LS-DYNA, Part II: Parametric Studies

    OpenAIRE

    M. Raguraman; A. Deb; N. K. Gupta; D. K. Kharat

    2008-01-01

    In Part I of the current two-part series, a comprehensive simulation-based study of impact of jacketed projectiles on mild steel armour plates has been presented. Using the modelling procedures developed in Part I, a number of parametric studies have been carried out for the same mild steel plates considered in Part I and reported here in Part II. The current investigation includes determination of ballistic limits of a given target plate for different projectile diameters and impact velociti...

  17. Numerical modeling of the dynamic behavior of structures under impact with a discrete elements / finite elements coupling

    International Nuclear Information System (INIS)

    Rousseau, J.

    2009-07-01

    That study focuses on concrete structures submitted to impact loading and is aimed at predicting local damage in the vicinity of an impact zone as well as the global response of the structure. The Discrete Element Method (DEM) seems particularly well suited in this context for modeling fractures. An identification process of DEM material parameters from macroscopic data (Young's modulus, compressive and tensile strength, fracture energy, etc.) will first be presented for the purpose of enhancing reproducibility and reliability of the simulation results with DE samples of various sizes. Then, a particular interaction, between concrete and steel elements, was developed for the simulation of reinforced concrete. The discrete elements method was validated on quasi-static and dynamic tests carried out on small samples of concrete and reinforced concrete. Finally, discrete elements were used to simulate impacts on reinforced concrete slabs in order to confront the results with experimental tests. The modeling of a large structure by means of DEM may lead to prohibitive computation times. A refined discretization becomes required in the vicinity of the impact, while the structure may be modeled using a coarse FE mesh further from the impact area, where the material behaves elastically. A coupled discrete-finite element approach is thus proposed: the impact zone is modeled by means of DE and elastic FE are used on the rest of the structure. An existing method for 3D finite elements was extended to shells. This new method was then validated on many quasi-static and dynamic tests. The proposed approach is then applied to an impact on a concrete structure in order to validate the coupled method and compare computation times. (author)

  18. Numerical simulation of the detection of crack in reinforced concrete structures of NPP due to expansion of reinforcing corrosive products using Impact-Echo method

    Directory of Open Access Journals (Sweden)

    Morávka Š.

    2008-12-01

    Full Text Available Nuclear energy boom is starting nowadays. But also current nuclear power plants (NPP are duty to certify their security for regular renewal of their operating licenses. NPP security can be significantly affected by defects of large amount of ageing reinforced concrete structures. Advanced Impact-Echo method seams to be very hopeful to cooperate at performing in-service inspections such structures. Just these in-service inspections are included in the first priority group of specific technical issues according to the recommendations of OECD-Nuclear Energy Agency, Commission on Safety of Nuclear Installation in the field of ageing management.This paper continues of extensive project dealing with Impact-Echo method application. It will present method description and main results of numerical modeling of detection and localization of crack caused by corrosive product expansion. Steel reinforcing rods are subjected to corrosion due to diffusion of corrosive agents from structure surface. Corrosive products have up to 7-times larger volume than pure steel. Raised strain can cad lead up to concrete failure and crack development. We investigate whether it is possible to detect these growing cracks by Impact-Echo method in time.Experimental verification of our numerical predictions is prepared on Civil Faculty in Brno.

  19. A multinomial-logit ordered-probit model for jointly analyzing crash avoidance maneuvers and crash severity

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    ' propensity to engage in various corrective maneuvers in the case of the critical event of vehicle travelling. Five lateral and speed control maneuvers are considered: “braking”, “steering”, “braking & steering”, and “other maneuvers”, in addition to a “no action” option. The analyzed data are retrieved from...... the United States National Automotive Sampling System General Estimates System (GES) crash database for the years 2005-2009. Results show (i) the correlation between crash avoidance maneuvers and crash severity, and (ii) the link between drivers' attributes, risky driving behavior, road characteristics...

  20. Analysis of delta velocity and PDOF by means of collision partner and structural involvement in real-life crash pulses with modern passenger cars.

    Science.gov (United States)

    Iraeus, Johan; Lindquist, Mats

    2014-01-01

    In the widely used National Automotive Sampling System (NASS)-Crashworthiness Data System (CDS) database, summary metrics that describe crashes are available. Crash angle or principal direction of force (PDOF) is estimated by the crash examiner and velocity changes (ΔV) in the x- and y-directions are calculated by the WinSMASH computer program using PDOF and results from rigid barrier crash testing combined with deformations of the crashed car. In recent years, results from event data recorders (EDRs) have been added to the database. The aim of this study is to compare both PDOF and ΔV between EDR measurements and WinSMASH calculations. NASS-CDS inclusion criteria were model-year 2000 through 2010 automobiles, frontal crashes with ΔV higher than 16 km/h, and the pulse entirely recorded in the EDR module. This resulted in 649 cases. The subject vehicles were further examined and characterized with regard to frontal structure engagement (large or small overlap) as well as collision properties of the partner (impact location; front, side, or back) or object. The EDR crash angle was calculated as the angle between the lateral and longitudinal ΔV at the time of peak longitudinal ΔV. This angle was compared to the NASS-CDS investigator's estimated PDOF with regard to structural engagement and the collision partner or object. Multiple linear regression was used to establish adjustment factors on ΔV and crash angle between the results calculated based on EDR recorded data and that estimated in NASS-CDS. According to this study, simulation in the newest WinSMASH version (2008) underestimates EDR ΔV by 11 percent for large overlap crashes and 17 percent for small overlap impacts. The older WinSMASH version, used prior to 2008, underestimated each one of these two groups by an additional 7 percentage points. Another significant variable to enhance the prediction was whether the crash examiner had reported the WinSMASH estimated ΔV as low or high. In this study, none

  1. Impact of aircraft exhaust on the atmosphere. Box model studies and 3-D mesoscale numerical case studies of seasonal differences

    Energy Technology Data Exchange (ETDEWEB)

    Petry, H; Ebel, A; Franzkowiak, V; Hendricks, J; Lippert, E; Moellhoff, M [Koeln Univ. (Germany). Inst. fuer Geophysik und Meteorologie

    1998-12-31

    The impact of aircraft emissions released in the tropopause region on atmospheric trace gases as O{sub 3} or HNO{sub 3} is investigated by means of model studies. Special emphasis is drawn on seasonal effects. A box model is applied as well as a 3-D mesoscale chemistry transport model. These model studies show that the impact of aircraft emissions on ozone in the tropopause region is much stronger in summer than in late autumn with a difference of one order of magnitude. (author) 14 refs.

  2. Impact of aircraft exhaust on the atmosphere. Box model studies and 3-D mesoscale numerical case studies of seasonal differences

    Energy Technology Data Exchange (ETDEWEB)

    Petry, H.; Ebel, A.; Franzkowiak, V.; Hendricks, J.; Lippert, E.; Moellhoff, M. [Koeln Univ. (Germany). Inst. fuer Geophysik und Meteorologie

    1997-12-31

    The impact of aircraft emissions released in the tropopause region on atmospheric trace gases as O{sub 3} or HNO{sub 3} is investigated by means of model studies. Special emphasis is drawn on seasonal effects. A box model is applied as well as a 3-D mesoscale chemistry transport model. These model studies show that the impact of aircraft emissions on ozone in the tropopause region is much stronger in summer than in late autumn with a difference of one order of magnitude. (author) 14 refs.

  3. MOTORCYCLE CRASH PREDICTION MODEL FOR NON-SIGNALIZED INTERSECTIONS

    Directory of Open Access Journals (Sweden)

    S. HARNEN

    2003-01-01

    Full Text Available This paper attempts to develop a prediction model for motorcycle crashes at non-signalized intersections on urban roads in Malaysia. The Generalized Linear Modeling approach was used to develop the model. The final model revealed that an increase in motorcycle and non-motorcycle flows entering an intersection is associated with an increase in motorcycle crashes. Non-motorcycle flow on major road had the greatest effect on the probability of motorcycle crashes. Approach speed, lane width, number of lanes, shoulder width and land use were also found to be significant in explaining motorcycle crashes. The model should assist traffic engineers to decide the need for appropriate intersection treatment that specifically designed for non-exclusive motorcycle lane facilities.

  4. Motorcycle crash causes and outcomes: pilot study : traffic tech.

    Science.gov (United States)

    2010-08-01

    The number of motorcyclist crash-related fatalities has more than doubled during the past 10 years. In the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU), Congress directed the Secretary of Transport...

  5. Preliminary plan for case-control crash risk study

    Science.gov (United States)

    2002-01-31

    The goal of the Federal Motor Carrier Safety Administration (FMCSA) is to reduce commercial vehicle-related fatalities and injuries. This is achieved through a thorough understanding of crash characteristics, precursors, and risk factors. This will h...

  6. Pedestrian and bicycle crash data analysis : 2005-2010.

    Science.gov (United States)

    2012-04-03

    The safety of pedestrians and bicyclists using the roadway is an increasing concern for the Michigan Department of Transportation (MDOT). This report summarizes data for motor vehicle crashes involving pedestrians and bicyclists in Michigan from 2005...

  7. Crash Data Improvement Program : An RSPCB Peer Exchange

    Science.gov (United States)

    2011-08-04

    This report provides a summary of the Crash Data Improvement Program (CDIP) peer : exchange sponsored by the Federal Highway Administrations (FHWA) Office of Safety : on August 4, 2011. The peer exchange was hosted in conjunction with the annual :...

  8. Relationship between organisational safety culture dimensions and crashes.

    Science.gov (United States)

    Varmazyar, Sakineh; Mortazavi, Seyed Bagher; Arghami, Shirazeh; Hajizadeh, Ebrahim

    2016-01-01

    Knowing about organisational safety culture in public transportation system can provide an appropriate guide to establish effective safety measures and interventions to improve safety at work. The aim of this study was investigation of association between safety culture dimensions (leadership styles and company values, usage of crashes information and prevention programmes, management commitment and safety policy, participation and control) with involved self-reported crashes. The associations were considered through Spearman correlation, Pearson chi-square test and logistic regression. The results showed an association among self-reported crashes (occurrence or non-occurrence) and factors including leadership styles and company values; management commitment and safety policy; and control. Moreover, it was found a negative correlation and an odds ratio less than one between control and self-reported crashes.

  9. Maintenance program decision-making utilizing crash data.

    Science.gov (United States)

    2013-07-01

    This document describes methods that may be used by UDOT Maintenance personnel to improve highway safety. Four programs have been recommended using crash data to make more informed decisions concerning maintenance programs as follows: : Snow & Ic...

  10. Evaluating the police service quality for handling traffic crash reporting

    DEFF Research Database (Denmark)

    Janstrup, Kira Hyldekær; Kaplan, Sigal; Barfod, Michael Bruhn

    2017-01-01

    Purpose The phenomenon of traffic crash under-reporting has been extensively documented in terms of its extent, but not equally analysed in terms of its reasons. As police distrust has been recently identified as a major reason for crash under-reporting, the purpose of this paper is to look...... at the police service quality for handling the reporting of traffic crashes. Design/methodology/approach This study introduces a novel approach to evaluate service quality that combines multi-criteria decision analysis (MCDA) with latent class analysis (LCA). Moreover, this study presents the design of a web......-based survey on the basis of the SERVQUAL approach to detecting strengths, opportunities and threats with crash reporting to the police at a strategic level. Transportation stakeholders (e.g. researchers, authorities, consultants, NGO representatives, suppliers) with an interest in traffic safety in Denmark...

  11. Traffic crash involvement: experiential driving knowledge and stressful contextual antecedents.

    Science.gov (United States)

    Legree, Peter J; Heffner, Tonia S; Psotka, Joseph; Martin, Daniel E; Medsker, Gina J

    2003-02-01

    Researchers have rarely examined stressful environments and psychological characteristics as predictors of driving behavior in the same study. The authors hypothesized that (a) safer drivers more accurately assess physical and emotional traffic hazards and (b) stress and emotional states elevate crash risk. The hypotheses were evaluated with procedural and declarative tacit driving knowledge tests requiring assessment of emotional and contextual hazards and with accident reports describing crash antecedents, including stressful events and environmental conditions. Analyses identified separate driving knowledge factors corresponding to emotional and contextual hazards that were significantly related to the crash criteria. Accident report analyses show that stress significantly elevates at-fault crash risk. The results demonstrate the importance of experiential knowledge acquired without instruction (procedural or tacit knowledge) and provide safety recommendations.

  12. Heavy Vehicle Crash Characteristics in Oman; 2009–2011

    Directory of Open Access Journals (Sweden)

    Islam Al-Bulushi

    2015-05-01

    Full Text Available In recent years, Oman has seen a shift in the burden of diseases towards road accidents. The main objective of this paper, therefore, is to describe key characteristics of heavy vehicle crashes in Oman and identify the key driving behaviours that influence fatality risks. Crash data from January 2009 to December 2011 were examined and it was found that, of the 22,543 traffic accidents that occurred within this timeframe, 3,114 involved heavy vehicles. While the majority of these crashes were attributed to driver behaviours, a small proportion was attributed to other factors. The results of the study indicate that there is a need for a more thorough crash investigation process in Oman. Future research should explore the reporting processes used by the Royal Oman Police, cultural influences on heavy vehicle operations in Oman and improvements to the current licensing system.

  13. Data mining the Kansas traffic-crash database : final report.

    Science.gov (United States)

    2009-08-01

    Traffic crashes results from the interaction of different parameters which includes highway geometrics, traffic characteristics and human factors. Geometric variables include number of lanes, lane width, median width, shoulder width, roadway section ...

  14. Data mining the Kansas traffic-crash database : summary.

    Science.gov (United States)

    2009-08-01

    Traffic crashes results from the interaction of different parameters which includes highway geometrics, traffic : characteristics and human factors. Geometric variables include number of lanes, lane width, median width, shoulder : width, roadway sect...

  15. Geo-demographic analysis of fatal motorcycle crashes

    Science.gov (United States)

    2001-01-01

    The objective of this study is to analyze the combined motor vehicle crash data from the Fatality Analysis Reporting System (FARS) with the Claritas geo-demographic database from the lifestyle perspective to determine the appropriate media to use in ...

  16. A numerical study on the impact of nonlinear interactions on the amplitude of the migrating semidiurnal tide

    Directory of Open Access Journals (Sweden)

    C. M. Huang

    2006-12-01

    Full Text Available To quantitatively study the effects of nonlinear interactions on tide structure, a nonlinear numerical tidal model is developed, and the reliability and convergence of the adopted algorithm and coding are checked by numerical experiments. Under the same conditions as those employed by the GSWM-00 (Global Scale Wave Model 2000, our model provides the nonlinear quasi-steady solution of the migrating semidiurnal tide, which differs from the GSWM-00 result (the linear steady solution in the MLT region, especially above 100 km. Additionally, their amplitude difference displays a remarkable month-to-month variation, and its significant magnitudes occur during the month with strong semidiurnal tide. A quantitative analysis suggests that the main cause for the amplitude difference is that the initial migrating 12-h tide will interact with the mean flow as well as the nonlinearity-excited 6-h tide, and subsequently yield a new 12-h tidal part. Furthermore, our simulations also show that the mean flow/tidal interaction will significantly alter the background wind and temperature fields. The large magnitudes of the tidal amplitude difference and the background alteration indicate that the nonlinear processes involved in tidal propagations should be comprehensively considered in the description of global atmospheric dynamics in the MLT region. The comparisons among our simulations, the GSWMs and some observations of tides suggest that the nonlinearity-induced tidal structure variation could be a possible mechanism to account for some discrepancies between the GSWMs and the observations.

  17. Micro-foundation using percolation theory of the finite time singular behavior of the crash hazard rate in a class of rational expectation bubbles

    Science.gov (United States)

    Seyrich, Maximilian; Sornette, Didier

    2016-04-01

    We present a plausible micro-founded model for the previously postulated power law finite time singular form of the crash hazard rate in the Johansen-Ledoit-Sornette (JLS) model of rational expectation bubbles. The model is based on a percolation picture of the network of traders and the concept that clusters of connected traders share the same opinion. The key ingredient is the notion that a shift of position from buyer to seller of a sufficiently large group of traders can trigger a crash. This provides a formula to estimate the crash hazard rate by summation over percolation clusters above a minimum size of a power sa (with a>1) of the cluster sizes s, similarly to a generalized percolation susceptibility. The power sa of cluster sizes emerges from the super-linear dependence of group activity as a function of group size, previously documented in the literature. The crash hazard rate exhibits explosive finite time singular behaviors when the control parameter (fraction of occupied sites, or density of traders in the network) approaches the percolation threshold pc. Realistic dynamics are generated by modeling the density of traders on the percolation network by an Ornstein-Uhlenbeck process, whose memory controls the spontaneous excursion of the control parameter close to the critical region of bubble formation. Our numerical simulations recover the main stylized properties of the JLS model with intermittent explosive super-exponential bubbles interrupted by crashes.

  18. Minor Crashes and ‘Whiplash’ in the United States

    Science.gov (United States)

    Bartsch, Adam J.; Gilbertson, Lars G.; Prakash, Vikas; Morr, Douglas R.; Wiechel, John F.

    2008-01-01

    In the United States there is currently a paucity of available real world minor rear crash data with struck vehicle delta-V, or speed change, less than or equal to 15 kilometers per hour. These data are essential as researchers attempt to define ‘whiplash’ injury risk potential in these minor crashes. This study analyzed a new set of 105 U.S. minor rear aligned crashes between passenger vehicles. Mean struck vehicle delta-V and acceleration were 6.3 km/h (s.d. = 2.1 km/h) and 1.4g (s.d. = 0.5g), respectively. A total of 113 struck vehicle occupants were diagnosed within five weeks post-crash with 761 ICD-9-CM complaints and 427 AIS injuries (99.5% AIS1) attributed to the crashes. No striking vehicle occupants reported complaints. The main ICD-9-CM diagnoses were 40.6% cervical, 22.5% lumbar/sacral and 10.2% thoracic and the main AIS1 diagnoses were 29.7% cervical, 23.2% lumbar/sacral and 14.3% thoracic. The diagnosis disparity was mainly due to coding for pre-existing degenerative diagnosis in ICD-9-CM. Degenerative spine conditions were not significant for increased AIS1 injury risk. Surprisingly, many non-‘whiplash’ diagnoses were found. The AIS injury diagnosis distribution and frequency in these minor delta-V crashes did not correspond with previous minor rear crash studies. A prospectively collected and unbiased minor rear crash databank in the model of CIREN or NASS is highly desirable to verify or refute these results for the U.S. population since the current study cohort may have been influenced by litigation. PMID:19026229

  19. Minor crashes and 'whiplash' in the United States.

    Science.gov (United States)

    Bartsch, Adam J; Gilbertson, Lars G; Prakash, Vikas; Morr, Douglas R; Wiechel, John F

    2008-10-01

    In the United States there is currently a paucity of available real world minor rear crash data with struck vehicle delta-V, or speed change, less than or equal to 15 kilometers per hour. These data are essential as researchers attempt to define 'whiplash' injury risk potential in these minor crashes. This study analyzed a new set of 105 U.S. minor rear aligned crashes between passenger vehicles. Mean struck vehicle delta-V and acceleration were 6.3 km/h (s.d. = 2.1 km/h) and 1.4 g (s.d. = 0.5 g), respectively. A total of 113 struck vehicle occupants were diagnosed within five weeks post-crash with 761 ICD-9-CM complaints and 427 AIS injuries (99.5% AIS1) attributed to the crashes. No striking vehicle occupants reported complaints. The main ICD-9-CM diagnoses were 40.6% cervical, 22.5% lumbar/sacral and 10.2% thoracic and the main AIS1 diagnoses were 29.7% cervical, 23.2% lumbar/sacral and 14.3% thoracic. The diagnosis disparity was mainly due to coding for pre-existing degenerative diagnosis in ICD-9-CM. Degenerative spine conditions were not significant for increased AIS1 injury risk. Surprisingly, many non-'whiplash' diagnoses were found. The AIS injury diagnosis distribution and frequency in these minor delta-V crashes did not correspond with previous minor rear crash studies. A prospectively collected and unbiased minor rear crash databank in the model of CIREN or NASS is highly desirable to verify or refute these results for the U.S. population since the current study cohort may have been influenced by litigation.

  20. Cell phone use while driving and attributable crash risk.

    Science.gov (United States)

    Farmer, Charles M; Braitman, Keli A; Lund, Adrian K

    2010-10-01

    Prior research has estimated that crash risk is 4 times higher when talking on a cell phone versus not talking. The objectives of this study were to estimate the extent to which drivers talk on cell phones while driving and to compute the implied annual number of crashes that could have been avoided if driver cell phone use were restricted. A national survey of approximately 1200 U.S. drivers was conducted. Respondents were asked to approximate the amount of time spent driving during a given day, number of cell phone calls made or received, and amount of driving time spent talking on a cell phone. Population attributable risk (PAR) was computed for each combination of driver gender, driver age, day of week, and time of day. These were multiplied by the corresponding crash counts to estimate the number of crashes that could have been avoided. On average, drivers were talking on cell phones approximately 7 percent of the time while driving. Rates were higher on weekdays (8%), in the afternoon and evening (8%), and for drivers younger than 30 (16%). Based on these use rates, restricting cell phones while driving could have prevented an estimated 22 percent (i.e., 1.3 million) of the crashes in 2008. Although increased rates of cell phone use while driving should be leading to increased crash rates, crash rates have been declining. Reasons for this paradox are unclear. One possibility is that the increase in cell phone use and crash risk due to cell phone use have been overestimated. Another possibility is that cell phone use has supplanted other driving distractions that were similarly hazardous.

  1. Numerical simulations of mechanical and ignition-deflagration responses for PBXs under low-to-medium-level velocity impact loading.

    Science.gov (United States)

    Yang, Kun; Wu, Yanqing; Huang, Fenglei; Li, Ming

    2017-09-05

    An effective computational model is required to accurately predict the dynamic responses in accidental initiations of explosives. The present work uses a series of two-dimensional mechanical-chemical simulations performed via a hydrodynamic-code, DREXH-2D, to efficiently describe the mechanical and ignition-deflagration responses of cased cylindrical polymer-bonded explosives (PBXs) undergoing a low-to-medium-level impact (70-350m/s) in longitudinal direction. The ignition response was predicted based on an ignition criterion of effective plastic work. Slow burning and its growth to deflagration were described through a pressure-dependent reaction rate equation. The extreme value of effective plastic work was found to be useful to determine the ignition threshold velocity for PBXs. For low-level velocity impact, the incident stress wave reflection from lateral surfaces contributed to the formation of ignition regions. After the ignition, the deflagration was induced in the medium-level impact, and its violence was related to the shock strength. However, the low-strength stress wave only induced reaction at local regions, and sequent burning was no longer sensitive to the strength of incident wave. The predicted pressure and temperature results of PBXs were consistent with the medium-level impact tests performed by China Academy of Engineering Physics. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Design and numerical implementation of a 3-D non-linear viscoelastic constitutive model for brain tissue during impact

    NARCIS (Netherlands)

    Brands, D.W.A.; Peters, G.W.M.; Bovendeerd, P.H.M.

    2004-01-01

    Finite Element (FE) head models are often used to understand mechanical response of the head and its contents during impact loading in the head. CurrentFE models do not account for non-linear viscoelastic material behavior of brain tissue. We developed a new non-linear viscoelastic material model

  3. Numerical analysis

    CERN Document Server

    Khabaza, I M

    1960-01-01

    Numerical Analysis is an elementary introduction to numerical analysis, its applications, limitations, and pitfalls. Methods suitable for digital computers are emphasized, but some desk computations are also described. Topics covered range from the use of digital computers in numerical work to errors in computations using desk machines, finite difference methods, and numerical solution of ordinary differential equations. This book is comprised of eight chapters and begins with an overview of the importance of digital computers in numerical analysis, followed by a discussion on errors in comput

  4. Numerical relativity

    CERN Document Server

    Shibata, Masaru

    2016-01-01

    This book is composed of two parts: First part describes basics in numerical relativity, that is, the formulations and methods for a solution of Einstein's equation and general relativistic matter field equations. This part will be helpful for beginners of numerical relativity who would like to understand the content of numerical relativity and its background. The second part focuses on the application of numerical relativity. A wide variety of scientific numerical results are introduced focusing in particular on the merger of binary neutron stars and black holes.

  5. Role of Motorcycle Running Lights in Reducing Motorcycle Crashes during Daytime; A Review of the Current Literature

    Science.gov (United States)

    Davoodi, Seyed Rasoul; Hossayni, Seyed Mohamad

    2015-01-01

    In comparison to other transportation modes, riding motorcycle is prone to accidents. Motorcyclists are more exposed to physical injury than the car drivers. Many multi-vehicle motorcycles crashes occur, there is right-of- way violation takes place in which another vehicle turns in fronts of a motorcycle, or a sudden cross of path of an on-coming motorcycle. One main factor which leads to high rate of motorcycle crashes is lack of conspicuity of motorcycles by other road users especially during day time traffic. This paper highlights previous studies on the implementation of motorcycle DRLs, focusing on the efficacy of the DRLs to improve motorcycle conspicuity. This paper reviews the impacts of DRL by motorcyclists on multi-vehicle motorcycle crash. The three categories of effects of motorcycle DRLs were reviewed. All literature, supporting that operating headlights during daytime appears to be an influential and effective approach to reduce rate of collision by improving motorcycle’s conspicuity in traffic. The motorcycle DRLs managed to reduce about 4 to 20% of motorcycle crash risk. This paper also recommends that motorcycle DRLs must be used globally, especially in countries with high motorcycle accidents to improve the safety of the riders as well as their pillion riders. PMID:27162907

  6. Development of a continuous motorcycle protection barrier system using computer simulation and full-scale crash testing.

    Science.gov (United States)

    Atahan, Ali O; Hiekmann, J Marten; Himpe, Jeffrey; Marra, Joseph

    2018-07-01

    Road restraint systems are designed to minimize the undesirable effects of roadside accidents and improve safety of road users. These systems are utilized at either side or median section of roads to contain and redirect errant vehicles. Although restraint systems are mainly designed against car, truck and bus impacts there is an increasing pressure by the motorcycle industry to incorporate motorcycle protection systems into these systems. In this paper development details of a new and versatile motorcycle barrier, CMPS, coupled with an existing vehicle barrier is presented. CMPS is intended to safely contain and redirect motorcyclists during a collision event. First, crash performance of CMPS design is evaluated by means of a three dimensional computer simulation program LS-DYNA. Then full-scale crash tests are used to verify the acceptability of CMPS design. Crash tests were performed at CSI proving ground facility using a motorcycle dummy in accordance with prEN 1317-8 specification. Full-scale crash test results show that CMPS is able to successfully contain and redirect dummy with minimal injury risk on the dummy. Damage on the barrier is also minimal proving the robustness of the CMPS design. Based on the test findings and further review by the authorities the implementation of CMPS was recommended at highway system. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Structural Integrity Assessment of Reactor Containment Subjected to Aircraft Crash

    International Nuclear Information System (INIS)

    Kim, Junyong; Chang, Yoonsuk

    2013-01-01

    When an accident occurs at the NPP, containment building which acts as the last barrier should be assessed and analyzed structural integrity by internal loading or external loading. On many occasions that can occur in the containment internal such as LOCA(Loss Of Coolant Accident) are already reflected to design. Likewise, there are several kinds of accidents that may occur from the outside of containment such as earthquakes, hurricanes and strong wind. However, aircraft crash that at outside of containment is not reflected yet in domestic because NPP sites have been selected based on the probabilistic method. After intentional aircraft crash such as World Trade Center and Pentagon accident in US, social awareness for safety of infrastructure like NPP was raised world widely and it is time for assessment of aircraft crash in domestic. The object of this paper is assessment of reactor containment subjected to aircraft crash by FEM(Finite Element Method). In this paper, assessment of structural integrity of containment building subjected to certain aircraft crash was carried out. Verification of structure integrity of containment by intentional severe accident. Maximum stress 61.21MPa of horizontal shell crash does not penetrate containment. Research for more realistic results needed by steel reinforced concrete model

  8. Three Cases of Spine Fractures after an Airplane Crash.

    Science.gov (United States)

    Lee, Han Joo; Moon, Bong Ju; Pennant, William A; Shin, Dong Ah; Kim, Keung Nyun; Yoon, Do Heum; Ha, Yoon

    2015-10-01

    While injuries to the spine after an airplane crash are not rare, most crashes result in fatal injuries. As such, few studies exist that reported on spine fractures sustained during airplane accidents. In this report, we demonstrate three cases of spine fractures due to crash landing of a commercial airplane. Three passengers perished from injuries after the crash landing, yet most of the passengers and crew on board survived, with injuries ranging from minor to severe. Through evaluating our three spine fracture patients, it was determined that compression fracture of the spine was the primary injury related to the airplane accident. The first patient was a 20-year-old female who sustained a T6-8 compression fracture without neurologic deterioration. The second patient was a 33-year-old female with an L2 compression fracture, and the last patient was a 49-year-old male patient with a T8 compression fracture. All three patients were managed conservatively and required spinal orthotics. During the crash, each of these patients were subjected to direct, downward high gravity z-axis (Gz) force, which gave rise to load on the spine vertically, thereby causing compression fracture. Therefore, new safety methods should be developed to prevent excessive Gz force during airplane crash landings.

  9. Fatal motorcycle crashes: a growing public health problem in Cambodia.

    Science.gov (United States)

    Roehler, Douglas R; Ear, Chariya; Parker, Erin M; Sem, Panhavuth; Ballesteros, Michael F

    2015-01-01

    This study examines the risk characteristics of fatal motorcycle crashes in Cambodia over a 5-year period (2007-2011). Secondary data analyses were conducted using the Cambodia Road Crash and Victim Information System, the only comprehensive and integrated road crash surveillance system in the country. Researchers from the Centers for Disease Control and Prevention and Handicap International found that (1) males are dying in motorcycle crashes roughly seven times more frequently than females; (2) motorcyclist fatalities increased by about 30% from 2007 to 2011; (3) the motorcyclist death rates per 100,000 population increased from 7.4 to 8.7 deaths from 2007 to 2011; and (4) speed-related crashes and not wearing motorcycle helmet were commonly reported for motorcyclist fatalities at approximately 50% and over 80% through the study years, respectively. Additionally, this study highlights that Cambodia has the highest motorcycle death rate in South-East Asia, far surpassing Thailand, Malaysia, and Myanmar. By recognising the patterns of fatal motorcycle crashes in Cambodia, local road-safety champions and stakeholders can design targeted interventions and preventative measures to improve road safety among motorcyclists.

  10. Three Cases of Spine Fractures after an Airplane Crash

    Science.gov (United States)

    Lee, Han Joo; Moon, Bong Ju; Pennant, William A.; Shin, Dong Ah; Kim, Keung Nyun; Yoon, Do Heum

    2015-01-01

    While injuries to the spine after an airplane crash are not rare, most crashes result in fatal injuries. As such, few studies exist that reported on spine fractures sustained during airplane accidents. In this report, we demonstrate three cases of spine fractures due to crash landing of a commercial airplane. Three passengers perished from injuries after the crash landing, yet most of the passengers and crew on board survived, with injuries ranging from minor to severe. Through evaluating our three spine fracture patients, it was determined that compression fracture of the spine was the primary injury related to the airplane accident. The first patient was a 20-year-old female who sustained a T6-8 compression fracture without neurologic deterioration. The second patient was a 33-year-old female with an L2 compression fracture, and the last patient was a 49-year-old male patient with a T8 compression fracture. All three patients were managed conservatively and required spinal orthotics. During the crash, each of these patients were subjected to direct, downward high gravity z-axis (Gz) force, which gave rise to load on the spine vertically, thereby causing compression fracture. Therefore, new safety methods should be developed to prevent excessive Gz force during airplane crash landings. PMID:27169094

  11. The Impact of Perceptual/Concurrent and Mnemonic Digits on Temporal Processing: A Congruency Effect of Numerical Magnitudes.

    Science.gov (United States)

    Fan, Zhao; Jing, Guomin; Ding, Xianfeng; Cheng, Xiaorong

    2016-01-01

    Task-irrelevant stimulus numbers can automatically modulate concurrent temporal tasks--leading to the phenomenon of number-time association (NTA). Recent research provides converging evidence that the NTA occurs at the stage of temporal memory. Specifically, a reference memory containing encoded duration information can be modified by perceptual/concurrent digits, i.e., a perceptual/concurrent digit-induced NTA. Here, with five experiments, we investigated whether another working memory (WM)-related mechanism was involved in the generation of NTAs and how this memory-induced NTA was related with the perception-induced NTA. We first explored whether similar NTA effects existed for mnemonic digits which disappeared before time encoding but were actively maintained in WM, i.e., a mnemonic digit-induced NTA. Experiments 1-3 demonstrated both types of NTAs. Further, we revealed a close relationship between the two types of NTAs in two contexts. First, the mnemonic digit-induced NTA also relied on a perceptual number-time co-occurrence at time encoding. We found that the mnemonic digits influenced subsequent temporal processing when a task-irrelevant constant number '5' was presented during target encoding, but not when a non-numerical symbol was presented, suggesting that temporal representations in the reference memory could be accessed and modified by both sensory and postsensory numerical magnitudes through this number-time co-occurrence. Second, the effects of perceptual and mnemonic digits on temporal reproduction could cancel each other out. A congruency effect for perceptual and mnemonic digits (relying on memorization requirement) was demonstrated in Experiments 4 and 5. Specifically, a typical NTA was observed when the magnitudes of memorized and the perceptual/concurrent digits were congruent (both were large or small numbers), but not when they were incongruent (one small and one large numbers). Taken together, our study sheds new light on the mechanism of

  12. The impact of structural development on near bed flow dynamics in gravel bed rivers: coupling flume experiments with numerical modelling

    Science.gov (United States)

    Ockelford, A.; Hardy, R. J.; Rice, S. P.; Powell, M.

    2017-12-01

    It is increasingly being recognised that gravel bed rivers develop a surface `texture' in response to changes in the flow and sediment regime. This textural response often takes the form of a bed structure which develops to ultimately stabilise the surface across a range of spatio-temporal scales and it is these topographical structures which determine the flow structures that develop over the river bed. However, our ability to measure and parameterise that structure in ways that are useful and meaningful for the prediction of flow dynamics, still remains inadequate; this paper uses a three dimensional numerical model to assess how the temporal development of structure influences the near bed flow dynamics. Using a suite of flume based experiments a unimodal grain size distribution (σg = 1.30, D50 = 8.8mm) was exposed to three different levels of constant bed shear that produced sediment transport conditions ranging from marginal transport to conditions approaching full mobility of all size fractions. Surface structuring characteristics were measured at a high spatio-temporal resolution such that the time evolution of the beds could be fully described. In total 54 surfaces were generated and run through a Reynolds averaged three dimensional numerical model with an Rng turbulence closure. The topography input included using an immersed boundary technique within a Cartesian framework. Discussion concentrates on the how the trajectory of structural evolution under the different treatments affects the near bed flow dynamics. Specifically links are made between how the scales of boundary topography influence the flow and discusses how the measured flow variability at any one point will contain both locally derived and upstream-inherited flow structures, according to the range of scales of bed topography present. Keywords: Graded, Sediment, Structure, Turbulence, Modelling

  13. Development of a prediction model for crash occurrence by analyzing traffic crash and citation data : final report.

    Science.gov (United States)

    2017-04-30

    It is commonly acknowledged that factors such as human factors, vehicle characteristics, road design and environmental factors highly contribute to the occurrence of traffic crashes (WHO, 2004). Since human factors usually have the most significant i...

  14. The Development of Two Composite Energy Absorbers for Use in a Transport Rotorcraft Airframe Crash Testbed (TRACT 2) Full-Scale Crash Test

    Science.gov (United States)

    Littell, Justin D.; Jackson, Karen E.; Annett, Martin S.; Seal, Michael D.; Fasanella, Edwin L.

    2015-01-01

    Two composite energy absorbers were developed and evaluated at NASA Langley Research Center through multi-level testing and simulation performed under the Transport Rotorcraft Airframe Crash Testbed (TRACT) research program. A conical-shaped energy absorber, designated the conusoid, was evaluated that consisted of four layers of hybrid carbon-Kevlar plain weave fabric oriented at [+45deg/-45deg/-45deg/+45deg] with respect to the vertical direction. A sinusoidal-shaped energy absorber, designated the sinusoid, was developed that consisted of hybrid carbon-Kevlar plain weave fabric face sheets, two layers for each face sheet oriented at +/-45deg with respect to the vertical direction, and a closed-cell ELFOAM P200 polyisocyanurate (2.0-lb/cu ft) foam core. The design goal for the energy absorbers was to achieve average floor-level accelerations of between 25- and 40-g during the full-scale crash test of a retrofitted CH-46E helicopter airframe, designated TRACT 2. Variations in both designs were assessed through dynamic crush testing of component specimens. Once the designs were finalized, subfloor beams of each configuration were fabricated and retrofitted into a barrel section of a CH-46E helicopter. A vertical drop test of the barrel section was conducted onto concrete to evaluate the performance of the energy absorbers prior to retrofit into TRACT 2. The retrofitted airframe was crash tested under combined forward and vertical velocity conditions onto soft soil. Finite element models were developed of all test articles and simulations were performed using LS-DYNA, a commercial nonlinear explicit transient dynamic finite element code. Test-analysis results are presented for each energy absorber as comparisons of time-history responses, as well as predicted and experimental structural deformations and progressive damage under impact loading for each evaluation level.

  15. Numerical study of the spreading and solidification of a molten particle impacting onto a rigid substrate under plasma spraying conditions

    Directory of Open Access Journals (Sweden)

    Oukach Soufiane

    2015-01-01

    Full Text Available This paper deals with simulation of the spreading and solidification of a fully molten particle impacting onto a preheated substrate under traditional plasma spraying conditions. The multiphase problem governing equations of mass, momentum and energy conservation taking into account heat transfer by conduction, convection and phase change are solved by using a Finite Element approach. The interface between molten particle and surrounding air, is tracked using the Level Set method. The effect of the Reynolds number on the droplet spreading and solidification, using a wide range of impact velocities (40-250m/s, is reported. A new correlation that predicts the final spread factor of splat as a function of Reynolds number is obtained. Thermal contact resistance, viscous dissipation, wettability and surface tension forces effects are taken into account.

  16. A stepwise approach for introducing numerical modeling in Environmental Engineering MSc unit: The impact of clear assessment criteria and detailed feedback

    Science.gov (United States)

    Rosolem, R.; Pritchard, J.

    2017-12-01

    An important aspect for the new generation of hydrologists and water resources managers is the understanding of hydrological processes through the application of numerical environmental models. Despite its importance, teaching numerical modeling subjects to young students in our MSc Water and Environment Management programme has been difficult, for instance, due to the wide range of student background and lack or poor contact with numerical modeling tools in the past. In previous years, this numerical skills concept has been introduced as a project assignment in our Terrestrial Hydrometeorology unit. However, previous efforts have shown non-optimal engagement by students with often signs of lack of interest or anxiety. Given our initial experience with this unit, we decided to make substantial changes to the coursework format with the aim to introduce a more efficient learning environment to the students. The proposed changes include: (1) a clear presentation and discussion of the assessment criteria at the beginning of the unit, (2) a stepwise approach in which students use our learning environment to acquire knowledge for individual components of the model step-by-step, and (3) access to timely and detailed feedback allowing for particular steps to be retraced or retested. In order to understand the overall impact on assessment and feedback, we carried out two surveys at the beginning and end of the module. Our results indicate a positive impact to student learning experience, as the students have clearly benefited from the early discussion on assignment criteria and appeared to have correctly identified the skills and knowledge required to carry out the assignment. In addition, we have observed a substantial increase in the quality of the reports. Our results results support that student engagement has increased since changes to the format of the coursework were introduced. Interestingly, we also observed a positive impact on the assignment to the final exam

  17. Impact of numerical choices on water conservation in the E3SM Atmosphere Model version 1 (EAMv1

    Directory of Open Access Journals (Sweden)

    K. Zhang

    2018-06-01

    Full Text Available The conservation of total water is an important numerical feature for global Earth system models. Even small conservation problems in the water budget can lead to systematic errors in century-long simulations. This study quantifies and reduces various sources of water conservation error in the atmosphere component of the Energy Exascale Earth System Model. Several sources of water conservation error have been identified during the development of the version 1 (V1 model. The largest errors result from the numerical coupling between the resolved dynamics and the parameterized sub-grid physics. A hybrid coupling using different methods for fluid dynamics and tracer transport provides a reduction of water conservation error by a factor of 50 at 1° horizontal resolution as well as consistent improvements at other resolutions. The second largest error source is the use of an overly simplified relationship between the surface moisture flux and latent heat flux at the interface between the host model and the turbulence parameterization. This error can be prevented by applying the same (correct relationship throughout the entire model. Two additional types of conservation error that result from correcting the surface moisture flux and clipping negative water concentrations can be avoided by using mass-conserving fixers. With all four error sources addressed, the water conservation error in the V1 model becomes negligible and insensitive to the horizontal resolution. The associated changes in the long-term statistics of the main atmospheric features are small. A sensitivity analysis is carried out to show that the magnitudes of the conservation errors in early V1 versions decrease strongly with temporal resolution but increase with horizontal resolution. The increased vertical resolution in V1 results in a very thin model layer at the Earth's surface, which amplifies the conservation error associated with the surface moisture flux correction. We note

  18. Simulation of the Impact of New Aircraft- and Satellite-Based Ocean Surface Wind Measurements on H*Wind Analyses and Numerical Forecasts

    Science.gov (United States)

    Miller, Timothy; Atlas, Robert; Black, Peter; Chen, Shuyi; Hood, Robbie; Johnson, James; Jones, Linwood; Ruf, Chris; Uhlhorn, Eric; Krishnamurti, T. N.; hide

    2009-01-01

    The Hurricane Imaging Radiometer (HIRAD) is a new airborne microwave remote sensor for hurricane observations that is currently under development by NASA Marshall Space Flight Center, NOAA Hurricane Research Division, the University of Central Florida and the University of Michigan. HIRAD is being designed to enhance the realtime airborne ocean surface winds observation capabilities of NOAA and USAF Weather Squadron hurricane hunter aircraft using the operational airborne Stepped Frequency Microwave Radiometer (SFMR). Unlike SFMR, which measures wind speed and rain rate along the ground track directly beneath the aircraft, HIRAD will provide images of the surface wind and rain field over a wide swath ( 3 x the aircraft altitude). The present paper describes a set of Observing System Simulation Experiments (OSSEs) in which measurements from the new instrument as well as those from existing instruments (air, surface, and space-based) are simulated from the output of a detailed numerical model, and those results are used to construct H*Wind analyses. The H*Wind analysis, a product of the Hurricane Research Division of NOAA s Atlantic Oceanographic and Meteorological Laboratory, brings together wind measurements from a variety of observation platforms into an objective analysis of the distribution of wind speeds in a tropical cyclone. This product is designed to improve understanding of the extent and strength of the wind field, and to improve the assessment of hurricane intensity. See http://www.aoml.noaa.gov/hrd/data_sub/wind.html. Evaluations will be presented on the impact of the HIRAD instrument on H*Wind analyses, both in terms of adding it to the full suite of current measurements, as well as using it to replace instrument(s) that may not be functioning at the future time the HIRAD instrument is implemented. Also shown will be preliminary results of numerical weather prediction OSSEs in which the impact of the addition of HIRAD observations to the initial state

  19. Simulation of the Impact of New Aircraft-and Satellite-based Ocean Surface Wind Measurements on Wind Analyses and Numerical Forecasts

    Science.gov (United States)

    Miller, TImothy; Atlas, Robert; Black, Peter; Chen, Shuyi; Jones, Linwood; Ruf, Chris; Uhlhorn, Eric; Gamache, John; Amarin, Ruba; El-Nimri, Salem; hide

    2010-01-01

    The Hurricane Imaging Radiometer (HIRAD) is a new airborne microwave remote sensor for hurricane observations that is currently under development by NASA Marshall Space Flight Center, NOAA Hurricane Research Division, the University of Central Florida and the University of Michigan. HIRAD is being designed to enhance the realtime airborne ocean surface winds observation capabilities of NOAA and USAF Weather Squadron hurricane hunter aircraft currently using the operational airborne Stepped Frequency Microwave Radiometer (SFMR). Unlike SFMR, which measures wind speed and rain rate along the ground track directly beneath the aircraft, HIRAD will provide images of the surface wind and rain field over a wide swath (approx. 3 x the aircraft altitude). The present paper describes a set of Observing System Simulation Experiments (OSSEs) in which measurements from the new instrument as well as those from existing instruments (air, surface, and space-based) are simulated from the output of a detailed numerical model, and those results are used to construct H*Wind analyses, a product of the Hurricane Research Division of NOAA s Atlantic Oceanographic and Meteorological Laboratory. Evaluations will be presented on the impact of the HIRAD instrument on H*Wind analyses, both in terms of adding it to the full suite of current measurements, as well as using it to replace instrument(s) that may not be functioning at the future time the HIRAD instrument is implemented. Also shown will be preliminary results of numerical weather prediction OSSEs in which the impact of the addition of HIRAD observations to the initial state on numerical forecasts of the hurricane intensity and structure is assessed.

  20. Testing and validation of numerical models of groundwater flow, solute transport and chemical reactions in fractured granites: A quantitative study of the hydrogeological and hydrochemical impact produced

    Energy Technology Data Exchange (ETDEWEB)

    Molinero Huguet, J

    2001-07-01

    This work deals with numerical modeling of groundwater flow, solute transport and chemical reactions through fractured media. These models have been developed within the framework of research activities founded by ENRESA , the Spanish Company for Nuclear Waste Management. This project is the result of a collaborative agreement between ENRESA and his equivalent Swedish Company (SKB) through the research project Task Force 5 of the Aspo Underground Laboratory. One of the objectives of this project is to assess quantitatively th hydrogeological and hydrochemical impact produced by the construction of a Deep Geological Repository in fractured granites. This is important because the new conditions altered construction impact will constitute the initial conditions for the repository closure stage. A second goo l of this work deals with testing the ability of current numerical tools to cope simultaneously with the complex hydrogeological and hydrochemical settlings, which are expected to take place in actual nuclear waste underground repositories constructed in crystalline fractured bed racks. This study has been undertaken through the performance of numerical models, which have subsequently been applied to simulate the hydrogeological and hydrochemical behavior of a granite massif, at a kilo metrical scale, during construction of the Aspo Hard Rock Underground Laboratory (Sweden). The Aspo Hard Rock Laboratory is a prototype, full-scale underground facility launched and operated by SKB. The main aim of the laboratory is to provide an opportunity for research, development and demonstration in a realistic rock environment down to the depth planned for the future deep repository. The framework of this underground facility provides a unique opportunity to attempt the objectives of the present dissertation. (Author)