WorldWideScience

Sample records for counter point bar

  1. Downstream-migrating fluvial point bars in the rock record

    Science.gov (United States)

    Ghinassi, Massimiliano; Ielpi, Alessandro; Aldinucci, Mauro; Fustic, Milovan

    2016-04-01

    deposits can be controlled by aggradation at the scale of the entire meander belt. Despite their different preservation potential, the sedimentology of downstream-bar deposits is overall similar to that of expansional bars, since a downstream decrease in grain size and dominance of upbar-directed palaeoflows are observed in both cases. Bar-tail deposits are instead distinctive of DMFPB, specifically when channel-flow impinges at high angle against river outer banks. There, fine-grained counter-point bars or coarse-grained eddy-accretion deposits can accumulate. Channel belts dominated by DMFPB develop cross-sectional configurations featuring two main marginal trenches, commonly filled with bar tail deposits.

  2. Measurement of $\\pi^{+/-}, K^{+/-}, p$ and $\\bar{p}$ production in $Z^0 \\to q\\bar{q}, Z^{0} \\to b\\bar{b}$ and $Z^{0} \\to u\\bar{u}, d\\bar{d}, s\\bar{s}$ (Particle Identification with the DELPHI Barrel Ring Imaging Cherenkov Counter)

    CERN Document Server

    Schyns, Emile

    1997-01-01

    Measurement of $\\pi^{+/-}, K^{+/-}, p$ and $\\bar{p}$ production in $Z^0 \\to q\\bar{q}, Z^{0} \\to b\\bar{b}$ and $Z^{0} \\to u\\bar{u}, d\\bar{d}, s\\bar{s}$ (Particle Identification with the DELPHI Barrel Ring Imaging Cherenkov Counter)

  3. CounterPoint: Zeeman-split absorption lines

    Science.gov (United States)

    Deen, Casey

    2015-12-01

    CounterPoint works in concert with MoogStokes (ascl:1308.018). It applies the Zeeman effect to the atomic lines in the region of study, splitting them into the correct number of Zeeman components and adjusting their relative intensities according to the predictions of Quantum Mechanics, and finally creates a Moog-readable line list for use with MoogStokes. CounterPoint has the ability to use VALD and HITRAN line databases for both atomic and molecular lines.

  4. Nearshore bars and the break-point hypothesis

    Science.gov (United States)

    Sallenger, A.H.; Howd, P.A.

    1989-01-01

    The set of hypotheses calling for bar formation at the break point was tested with field data. During two different experiments, waves were measured across the surf zone coincident with the development of a nearshore bar. We use a criterion, based on the wave height to depth ratio, to determine the offshore limit of the inner surf zone. During the first experiment, the bar became better developed and migrated offshore while remaining well within the inner surf zone. During the second experiment, the surf zone was narrower and we cannot rule out the possibility of break point processes contributing to bar development. We conclude that bars are not necessarily coupled with the break point and can become better developed and migrate offshore while being in the inner surf zone landward from initial wave breaking in the outer surf zone. ?? 1989.

  5. A 3D forward stratigraphic model of fluvial meander-bend evolution for prediction of point-bar lithofacies architecture

    Science.gov (United States)

    Yan, Na; Mountney, Nigel P.; Colombera, Luca; Dorrell, Robert M.

    2017-08-01

    Although fundamental types of fluvial meander-bend transformations - expansion, translation, rotation, and combinations thereof - are widely recognised, the relationship between the migratory behaviour of a meander bend, and its resultant accumulated sedimentary architecture and lithofacies distribution remains relatively poorly understood. Three-dimensional data from both currently active fluvial systems and from ancient preserved successions known from outcrop and subsurface settings are limited. To tackle this problem, a 3D numerical forward stratigraphic model - the Point-Bar Sedimentary Architecture Numerical Deduction (PB-SAND) - has been devised as a tool for the reconstruction and prediction of the complex spatio-temporal migratory evolution of fluvial meanders, their generated bar forms and the associated lithofacies distributions that accumulate as heterogeneous fluvial successions. PB-SAND uses a dominantly geometric modelling approach supplemented by process-based and stochastic model components, and is constrained by quantified sedimentological data derived from modern point bars or ancient successions that represent suitable analogues. The model predicts the internal architecture and geometry of fluvial point-bar elements in three dimensions. The model is applied to predict the sedimentary lithofacies architecture of ancient preserved point-bar and counter-point-bar deposits of the middle Jurassic Scalby Formation (North Yorkshire, UK) to demonstrate the predictive capabilities of PB-SAND in modelling 3D architectures of different types of meander-bend transformations. PB-SAND serves as a practical tool with which to predict heterogeneity in subsurface hydrocarbon reservoirs and water aquifers.

  6. From Contrapuntal Music to Polyphonic Novel: Aldous Huxley’s Point Counter Point

    Directory of Open Access Journals (Sweden)

    Mevlüde ZENGİN

    2015-06-01

    Full Text Available Taken at face value Point Counter Point (1928 written by Aldous Huxley seems to be a novel including many stories of various and sundry people and reflecting their points of view about the world in which they live and about the life they have been leading. However, it is this very quality of the novel that provides grounds for the study of the novel as a polyphonic one. The novel presents to its reader an aggregate of strikingly different characters and thus a broad spectrum of contemporary society. The characters in the novel are all characterized by and individualized with easily recognizable physical, intellectual, emotional, psychological and moral qualities. Each of them is well-contrived through their differences in social status, political views, wealth, etc. Thus, many different viewpoints, conflicting voices, contrasting insights and ideas are heard and seen synchronically in Point Counter Point, which makes it polyphonic. Polyphony is a musical motif referring to different notes and chords played at the same time to create a rhythm. It was first adopted by M. M. Bakhtin to analyze F. M. Dostoyevsky’s fiction. The aim of this study is firstly to elucidate, in Bakhtinian thought, polyphony and then dialogism and heteroglossia closely related to his concept of polyphony; and then to put the polyphonic qualities in Point Counter Point forth, studying the novel’s dialogism and heteroglot qualities

  7. Response of the integrals in the Tremaine-Weinberg method to multiple pattern speeds: a counter-rotating inner bar in NGC 2950?

    CERN Document Server

    Maciejewski, W

    2006-01-01

    When integrals in the standard Tremaine-Weinberg method are evaluated for the case of a realistic model of a doubly barred galaxy, their modifications introduced by the second rotating pattern are in accord with what can be derived from a simple extension of that method, based on separation of tracer's density. This extension yields a qualitative argument that discriminates between prograde and retrograde inner bars. However, the estimate of the value of inner bar's pattern speed requires further assumptions. When this extension of the Tremaine-Weinberg method is applied to the recent observation of the doubly barred galaxy NGC 2950, it indicates that the inner bar there is counter-rotating, possibly with the pattern speed of -140 +/- 50 km/s/arcsec. The occurrence of counter-rotating inner bars can constrain theories of galaxy formation.

  8. The Shengli I Point Bar on the Yellow River Delta: Three-Dimensional Structures and Their Evolution

    Institute of Scientific and Technical Information of China (English)

    钟建华; 沈晓华; 倪晋仁; 王冠民; 温志峰; 王夕宾; 王海桥; 李理; 吴孔友; 李勇; 洪梅

    2002-01-01

    Point bars are well developed on the Yellow River delta, among which the Shengli I point bar is the mosttypical. The point bar, being about 4 km in length and several tens to more than 100 meters in width, is located on the southside of the Shengli Bridge in Kenli County, Dongying, Shandong. It is a typical fine-grained point bar with silt, which ispredominant, some clay and minor plant debris and clay boulders. The Shengli I point bar has complicated 3-D structures.Firstly, in a plane view, it comprises mainly eight sedimentary units, bar edge, bar ridge, bar platform, bar plain, bar channel,bar gully, bar pond and bar bay, developing side by side and superimposed one by one in a complex way. Secondly, itsvertical structures are very complex due to the partial superimposition of the 8 sedimentary units. Besides hydatogenesis, veryintensive wind erosion, eolian, ice and meltwater actions are also visible on the Shengli I point bar. The complex form is madeeven more complicated because of the above co-actions.

  9. The V0 detector is two disks of counters in both sides of the interaction point.

    CERN Multimedia

    Grossiord, Jean-Yves

    2006-01-01

    The V0 detector is two disks of counters in both sides of the interaction point. Here is the V0C disk to be fixed on the front face of the muon spectrometer absorber. It is made of 48 scintillating elements coupled to two wavelength fibre layers which emit and guide the light up to connrctors arounda case made of Carbon fibre plates. The light going out of connectors is collected by an optical fibre bundle and transmitted at 3 metres to photo-multipliers which convert light to electrical signal. The elements are set in the case following 2 small rings of 8 counters and 2 large rings of 16 counters grouped two by two. 32 channels of detection distributed around the LHC beam pipe constitute thus the detector

  10. Evaluation of Particle Counter Technology for Detection of Fuel Contamination Detection Utilizing Fuel System Supply Point

    Science.gov (United States)

    2014-06-19

    utilizing Fuel System Supply Point Joel Schmitigal U S Army Tank Automotive Research DISTRIBUTION STATEMENT A. Approved for public release; distribution...UNCLASSIFIED 6 UNCLASSIFIED Receipt Vehicle Fuel Tank Fuel Injector Aviation Fuel DEF (AUST) 5695B 18/16/13 Parker 18...Test Center while AMRDEC was conducting Alcohol to Jet (ATJ) fuel flight tests (17). The test results indicated that on-line particle counters

  11. POINT/CounterPOINT: The View from the Trenches of Education Policy Research

    Science.gov (United States)

    Ballou, Dale; Springer, Matthew G.; McCaffrey, Daniel F.; Lockwood, J. R.; Stecher, Brian M.; Hamilton, Laura; Pepper, Matthew

    2012-01-01

    The Project on Incentives in Teaching (POINT) was a three-year study testing the hypothesis that rewarding teachers for improved student scores on standardized tests would cause scores to rise. Results, as described in Springer et al. (2010b), did not confirm this hypothesis. In this article we provide additional information on the POINT study…

  12. Dynamics of Nearshore Sand Bars and Infra-gravity Waves: The Optimal Theory Point of View

    Science.gov (United States)

    Bouchette, F.; Mohammadi, B.

    2016-12-01

    It is well known that the dynamics of near-shore sand bars are partly controlled by the features (location of nodes, amplitude, length, period) of the so-called infra-gravity waves. Reciprocally, changes in the location, size and shape of near-shore sand bars can control wave/wave interactions which in their turn alter the infra-gravity content of the near-shore wave energy spectrum. The coupling infra-gravity / near-shore bar is thus definitely two ways. Regarding numerical modelling, several approaches have already been considered to analyze such coupled dynamics. Most of them are based on the following strategy: 1) define an energy spectrum including infra-gravity, 2) tentatively compute the radiation stresses driven by this energy spectrum, 3) compute sediment transport and changes in the seabottom elevation including sand bars, 4) loop on the computation of infra-gravity taking into account the morphological changes. In this work, we consider an alternative approach named Nearshore Optimal Theory, which is a kind of breakdown point of view for the modeling of near-shore hydro-morphodynamics and wave/ wave/ seabottom interactions. Optimal theory applied to near-shore hydro-morphodynamics arose with the design of solid coastal defense structures by shape optimization methods, and is being now extended in order to model dynamics of any near-shore system combining waves and sand. The basics are the following: the near-shore system state is through a functional J representative of the energy of the system in some way. This J is computed from a model embedding the physics to be studied only (here hydrodynamics forced by simple infra-gravity). Then the paradigm is to say that the system will evolve so that the energy J tends to minimize. No really matter the complexity of wave propagation nor wave/bottom interactions. As soon as J embeds the physics to be explored, the method does not require a comprehensive modeling. Near-shore Optimal Theory has already given

  13. Implementing CHC to Counter Shoulder Surfing Attack in PassPoint – Style Graphical Passwords

    Directory of Open Access Journals (Sweden)

    M. Joshuva

    2011-05-01

    Full Text Available Graphical passwords are an alternative to existing alphanumeric passwords. In Graphical passwords users click on images than type a long, complex password. Passpoints scheme is one of the Graphical user authentication techniques. In this method the password is represented by multiple clicks on a single image. One of the advantages with Passpoints scheme is that, a user can click on any place in the image as a click point. Graphical authentication suffers a major drawback of Shoulder-surfing. Shoulder-surfing refers to someone observing the user’s action as the user enters a password. Due to this, the user’s action can be monitored by the attacker or it can be captured using recording devices such as camera. Sobrado and Birget suggested Convex Hull Click (CHC scheme to counter shoulder-surfing using PassIcons which is different from PassPoint scheme. In this paper, we described how CHC is implemented in Passpoint-sheme to counter Shoulder Surfing Attack.

  14. Study on dew point evaporative cooling system with counter-flow configuration

    KAUST Repository

    Lin, J.

    2015-12-18

    Dew point evaporative cooling has great potential as a disruptive process for sensible cooling of air below its entering wet bulb temperature. This paper presents an improved mathematical model for a single-stage dew point evaporative cooler in a counter-flow configuration. Longitudinal heat conduction and mass diffusion of the air streams, channel plate and water film, as well as the temperature difference between the plate and water film, are accounted for in the model. Predictions of the product air temperature are validated using three sets of experimental data within a discrepancy of 4%. The cooler’s heat and mass transfer process is analyzed in terms of its cooling capacity intensity, water evaporation intensity, and overall heat transfer coefficient along the channel. Parametric studies are conducted at different geometric and operating conditions. For the conditions evaluated, the study reveals that (1) the saturation point of the working air occurs at a fixed point regardless of the inlet air conditions, and it is mainly influenced by the working air ratio and channel height; (2) the intensity of the water evaporation approaches a minimum at 0.2 to 0.3m from the entrance; (3) the wet channel can be separated into two zones, and the overall heat transfer coefficient is above 100W/(m2·K) after the temperature of water film becomes higher than the working air temperature.

  15. Dimensional synthesis of six-bar Stephenson II linkage for fifteen precision points path generation

    Directory of Open Access Journals (Sweden)

    Khalid Nafees

    2016-09-01

    Full Text Available This paper presents the dimensional synthesis of a planar six-bar Stephenson II linkage having single degree of freedom with rotational constraints. The objective of the synthesis is to determine all the link lengths with their orientations of the linkage that is capable to follow the path specified by fifteen precision points. The analytical loop closure equations are formed using dyad and triad technique by means of complex number mathematics for path generation. These equations are solved simultaneously for fifteen displacement positions of coupler tracing point to determine various link lengths with their corresponding orientations. The displacement vector and coupler link motion are the prescribed parameters. The effectiveness of mechanism synthesis has been demonstrated on a numerical example. The solution of loop closure equations has been obtained using a MATLAB code. Finally, the determined link lengths with their orientations have been verified using SAM software.

  16. Unsteady-state analysis of a counter-flow dew point evaporative cooling system

    KAUST Repository

    Lin, J.

    2016-07-19

    Understanding the dynamic behavior of the dew point evaporative cooler is crucial in achieving efficient cooling for real applications. This paper details the development of a transient model for a counter-flow dew point evaporative cooling system. The transient model approaching steady conditions agreed well with the steady state model. Additionally, it is able to accurately predict the experimental data within 4.3% discrepancy. The transient responses of the cooling system were investigated under different inlet air conditions. Temporal temperature and humidity profiles were analyzed for different transient and step responses. The key findings from this study include: (1) the response trend and settling time is markedly dependent on the inlet air temperature, humidity and velocity; (2) the settling time of the transient response ranges from 50 s to 300 s when the system operates under different inlet conditions; and (3) the average transient wet bulb effectiveness (1.00–1.06) of the system is observed to be higher than the steady state wet bulb effectiveness (1.01) for our range of study. © 2016 Elsevier Ltd

  17. Implementation strategies to promote community-engaged efforts to counter tobacco marketing at the point of sale.

    Science.gov (United States)

    Leeman, Jennifer; Myers, Allison; Grant, Jennifer C; Wangen, Mary; Queen, Tara L

    2017-04-12

    The US tobacco industry spends $8.2 billion annually on marketing at the point of sale (POS), a practice known to increase tobacco use. Evidence-based policy interventions (EBPIs) are available to reduce exposure to POS marketing, and nationwide, states are funding community-based tobacco control partnerships to promote local enactment of these EBPIs. Little is known, however, about what implementation strategies best support community partnerships' success enacting EBPI. Guided by Kingdon's theory of policy change, Counter Tools provides tools, training, and other implementation strategies to support community partnerships' performance of five core policy change processes: document local problem, formulate policy solutions, engage partners, raise awareness of problems and solutions, and persuade decision makers to enact new policy. We assessed Counter Tools' impact at 1 year on (1) partnership coordinators' self-efficacy, (2) partnerships' performance of core policy change processes, (3) community progress toward EBPI enactment, and (4) salient contextual factors. Counter Tools provided implementation strategies to 30 partnerships. Data on self-efficacy were collected using a pre-post survey. Structured interviews assessed performance of core policy change processes. Data also were collected on progress toward EBPI enactment and contextual factors. Analysis included descriptive and bivariate statistics and content analysis. Following 1-year exposure to implementation strategies, coordinators' self-efficacy increased significantly. Partnerships completed the greatest proportion of activities within the "engage partners" and "document local problem" core processes. Communities made only limited progress toward policy enactment. Findings can inform delivery of implementation strategies and tests of their effects on community-level efforts to enact EBPIs.

  18. Teaching Literature through the Arts: A Few Notes on Teaching Aldous Huxley's Point Counter Point through Beethoven's Music

    Science.gov (United States)

    Badulescu, Dana

    2015-01-01

    The present article examines a teaching experiment undertaken by the author in order to point out not only the importance of the arts and aesthetics, but also their limitations. It also argues that, despite these limitations, the spirit of the arts opens us up to freedom and flexibility. Their purpose is not to give answers or solutions, but to…

  19. Aggradation and lateral migration shaping geometry of a tidal point bar: An example from salt marshes of the Northern Venice Lagoon (Italy)

    Science.gov (United States)

    Brivio, Lara; Ghinassi, Massimiliano; D'Alpaos, Andrea; Finotello, Alvise; Fontana, Alessandro; Roner, Marcella; Howes, Nick

    2016-08-01

    Although meanders are ubiquitous features of the tidal landscape, the architectural geometries of tidal point bar deposits are relatively unexplored and commonly investigated on the basis of facies models developed for their fluvial counterparts. The present study aims at improving current understanding of tidal point bar deposits developed in salt marsh settings, through a high-resolution investigation of an abandoned intertidal meander loop, located in the northern part of the Venice Lagoon (Italy). The study channel is 6 m wide and was active until the 1950s, when it was deactivated as consequence of a neck cut-off. A total of 150 cores was recovered from the associated point bar. The bar erosionally overlies a subtidal platform consisting of sand and mud and is covered by both channel fill and salt marsh mud. The bar, floored by a shell-rich sandy lag, consists of stratified fine sand, grading upward into sandy mud. The outer bank of the bend is characterized by well-developed, sand-rich levee deposits and absence of crevasse splays, which represent a distinctive feature of alluvial sedimentation. Sediment grain size distributions suggesting that seaward and landward sides of the point bar experienced comparable changes of bed shear stress due to alternation between flood and ebb currents, highlighting a remarkable difference with the classical downstream-fining characterizing fluvial point bars. Spatial interpolation between key stratal surfaces shows an overall thickening of the bar from 1.2 to 1.7 m in the direction of channel migration, associated with both lowering of the bar base and rising of its brink, which occurs in parallel with an increase in channel cross-sectional area, to progressively accommodate the increasing tidal prism. The bar top surface is characterized by a spoon-shaped geometry stemming out from a combination between lateral migration (8-10 cm/yr) and vertical aggradation (2.5-3.0 mm/yr) of the inner bank. In salt marsh settings

  20. The effect of coconut oil and palm oil as substituted oils to cocoa butter on chocolate bar texture and melting point

    Science.gov (United States)

    Limbardo, Rebecca Putri; Santoso, Herry; Witono, Judy Retti

    2017-05-01

    Cocoa butter has responsibility for dispersion medium to create a stable chocolate bar. Due to the economic reason, cocoa butter is partially or wholly substituted by edible oils e.g palm oil and coconut oil. The objective of the research was to observe the effect of oil substitution in the chocolate bar towards its melting point and texture. The research were divided in three steps which were preliminary research started with fat content analysis in cocoa powder, melting point analysis of substituted oils anc cocoa butter, and iodine number analysis in vegetable fats (cocoa butter, coconut oil, and palm oil), chocolate bar production with substitution 0%, 20%, 40%, 60%, 80%, and 100%wt of cocoa butter with each of substituted oils, and analysis process to determine the chocolate bar melting point with DSC and chocolate bar hardness with texture analyser. The increasement of substituted oils during substitution in chocolate bar would reduce the melting point of chocolate bar from 33.5°C to 31.6°C in palm oil substitution with cocoa butter and 33.5°C to 30.75°C in coconut oil substitution. The hardness of chocolate with palm oil were around 88.5 to 139 g on the 1st cycle and 22.75 to 132 g on the 2nd cycle. The hardness of chocolate with coconut oil were around 74.75 to 152.5 g on the 1st cycle and 53.25 to 132 g on the 2nd cycle. Maximum amount of fats substitution to produce a stable texture chocolate bar is 60% wt.

  1. Crack initiation at high loading rates applying the four-point bending split Hopkinson pressure bar technique

    Directory of Open Access Journals (Sweden)

    Henschel Sebastian

    2015-01-01

    Full Text Available Dynamic crack initiation with crack-tip loading rates of K̇ ≈ 2.106MPa√ms-1 in a high strength G42CrMoS4 steel was investigated. To this end, a previously developed split Hopkinson pressure bar with four-point bending was utilised. V-notched and pre-cracked Charpy specimens were tested. The detection of dynamic crack initiation was performed by analysing the dynamic force equilibrium between the incident and the transmission bar. Additionally, the signal of a near-field strain gauge and high-speed photography were used to determine the instant of crack initiation. To account for vibrations of the sample, a dynamic analysis of the stress intensity factor was performed. The dynamic and static analyses of the tests produced nearly the same results when a force equilibrium was achieved. Fracture-surface analysis revealed that elongated MnS inclusions strongly affected both the dynamic crack initiation and growth. Blunting of the precrack did not take place when a group of MnS inclusions was located directly at the precrack tip. Due to the direction of the elongated MnS inclusions perpendicular to the direction of crack growth, the crack could be deflected. The comparison with a 42CrMo4 steel without elongated MnS inclusions revealed the detrimental effect in terms of resistance to crack initiation. Taking the loading-rate dependency into consideration, it was shown that there was no pronounced embrittlement due to the high loading rates.

  2. Evaluation of portable point-of-care CD4 counter with high sensitivity for detecting patients eligible for antiretroviral therapy.

    Directory of Open Access Journals (Sweden)

    Yukari C Manabe

    Full Text Available BACKGROUND: Accurate, inexpensive point-of-care CD4+ T cell testing technologies are needed that can deliver CD4+ T cell results at lower level health centers or community outreach voluntary counseling and testing. We sought to evaluate a point-of-care CD4+ T cell counter, the Pima CD4 Test System, a portable, battery-operated bench-top instrument that is designed to use finger stick blood samples suitable for field use in conjunction with rapid HIV testing. METHODS: Duplicate measurements were performed on both capillary and venous samples using Pima CD4 analyzers, compared to the BD FACSCalibur (reference method. The mean bias was estimated by paired Student's t-test. Bland Altman plots were used to assess agreement. RESULTS: 206 participants were enrolled with a median CD4 count of 396 (range; 18-1500. The finger stick PIMA had a mean bias of -66.3 cells/µL (95%CI -83.4-49.2, P500 cells/µL with a mean bias of -120.6 (95%CI -162.8, -78.4, P<0.001. The sensitivity (95%CI of the Pima CD4 analyzer was 96.3% (79.1-99.8% for a <250 cells/ul cut-off with a negative predictive value of 99.2% (95.1-99.9%. CONCLUSIONS: The Pima CD4 finger stick test is an easy-to-use, portable, relatively fast device to test CD4+ T cell counts in the field. Issues of negatively-biased CD4 cell counts especially at higher absolute numbers will limit its utility for longitudinal immunologic response to ART. The high sensitivity and negative predictive value of the test makes it an attractive option for field use to identify patients eligible for ART, thus potentially reducing delays in linkage to care and ART initiation.

  3. IMPROVED HOMOTOPY ITERATION METHOD AND APPLIED TO THE NINE-POINT PATH SYNTHESIS PROBLEM FOR FOUR-BAR LINKAGES

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new algorithm called homotopy iteration method based on the homotopy function is studied and improved. By the improved homotopy iteration method, polynomial systems with high order and deficient can be solved fast and efficiently comparing to the original homotopy iteration method. Numerical examples for the ninepoint path synthesis of four-bar linkages show the advantages and efficiency of the improved homotopy iteration method.

  4. Repurposed automated handheld counter as a point-of-care tool to identify individuals 'at risk' of serious post-ivermectin encephalopathy.

    Directory of Open Access Journals (Sweden)

    Sasisekhar Bennuru

    2014-09-01

    Full Text Available Administration of ivermectin (IVM as part of mass drug administration (MDA campaigns for onchocerciasis and/or lymphatic filariasis (LF has been suspended in areas co-endemic for Loa loa due to severe post-treatment adverse events (SAEs associated with high-burden of infection (>30,000 mf/ml. One simple approach for preventing SAEs is to identify and exclude individuals at risk from MDA. Here, we describe a repurposed hand-held automated cell counter (Scepter 2.0; HHAC as a rapid, point-of-care method for quantifying microfilariae (mf in the blood of infected individuals.The quantification of microfilarial levels in blood of naturally infected humans, experimentally infected baboons, or mf-spiked human blood was tested using a microfluidic-based automated counter and compared to traditional calibrated thick-smears. We demonstrate that mf can be quantified in 20 µl of whole blood following lysis with 10% saponin within a minute of obtaining blood. There was a highly significant concordance between the counts obtained by the HHAC and those by microscopy for mf densities of >5,000 (p30,000 per ml (p<0.0001, r(c = 0.90. Preliminary proof of concept field studies in Cameroon with 20 µl of blood from L. loa infected humans (n = 22 and baboons (n = 4 also demonstrated a significantly high concordance (p<0.0001, r(c = 0.89 with calibrated thick blood smears counts.A repurposed HHAC is a portable, sensitive, rapid, point-of-care and quantitative tool to identify individuals with high levels of L. loa mf that put them at risk for SAEs following MDA. In addition, it provides ease of data storage and accessibility.

  5. Theories of translation and modernity's anguished counter points: José María Arguedas and Walter Benjamin

    Directory of Open Access Journals (Sweden)

    Joshua Price

    2010-12-01

    Full Text Available In order to illuminate some of the basic terms of translation theory, I explore two essays, José María Arguedas' "The Anguish of the Mestizo" and Walter Benjamin's "The Task of the Translator." I argue that the terms of translation theory can be changed by paying attention to the ‘replies' to European modernity made from outside of Europe, especially those replies that come as theory from the colonized, in this case in the form of Arguedas' work. In the conclusion, I juxtapose Arguedas' work on Quechua and Spanish to explore aspects of translation and linguistic invention at another point of domination: in this case, African-American English as described by James Baldwin. Through that, we can measure the potential of a network of histories constructed from Europe's others.

  6. Impact three-point bending tests on FRP by split-Hopkinson bar technique. Hopkinson boho ni yoru FRP no shogeki santenmage shiken

    Energy Technology Data Exchange (ETDEWEB)

    Higashida, F.; Ogawa, K. (Kyoto University, Kyoto (Japan). Faculty of Engineering)

    1990-10-15

    Fiber reinforced plastics (FRP) are widely used as high ratio strength structural material and strong interest is taken in their impact strength. In their impact bending test, observation is made of stress waveform, with which largely interferes high frequency fluctuation. Various measurement methods being studied to eliminate that interference, the present report used a split-Hopkinson bar technique, not influenced by the reflection of stress wave in the tester, and made impact three-point bending tests, up to about 15cm/s in impact speed, on CFRP and GFRP by having loosely ramped incident stress act. The result gave a smooth relation, almost free from high frequency fluctuation, between the load and time, which relation could accurately derive bending rigidity, breaking strength, etc. Of the CFRP and GFRP, elucidation was further made of independency of bending strength upon the strain speed, relation between the maximum stress and strain speed, effect of deformation speed on the three-point bending strength, etc. 35 refs., 8 figs., 1 tab.

  7. BEIJING BARS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Cappuccino Bar Cappuccino Bar, at the intersection of Dongzhimenwai Dajie and Sanlitun Beijie, Beijing's most vibrant nightlife area, is a hot new destination for European food lovers. With its perfect combination of both energy and tranquility, and surrounded by diplomatic compounds, it is conveniently located near other Beijing destinations including Lady Street

  8. Porter’s five forces reconsideration: Model of joint MBA programmes and schools’ fusion in the industry of Management Education as a counter point of competitive environment model : COMMUNICATION POUR LA BIENNALE 2015 « COOPERER » Identifiant : N° 448

    OpenAIRE

    NGUYEN, Thi Thu Tra

    2015-01-01

    International audience; In the scope of our doctoral research, business education is considered as an industry where business schools act as firms. Our thesis focuses on the strategic management field, with aims to explore how schools revisit their MBA curricula. Within this framework, joint and merged MBA programmes have been analysed as a counter point of Porter’s five forces (1980): rivalry among competitors, entry barriers, substitutions’ threats, buyers’ and suppliers’ bargaining power. ...

  9. Porter’s five forces reconsideration: Model of joint MBA programmes and schools’ fusion in the industry of Management Education as a counter point of competitive environment model : COMMUNICATION POUR LA BIENNALE 2015 « COOPERER » Identifiant : N° 448

    OpenAIRE

    NGUYEN, Thi Thu Tra

    2015-01-01

    International audience; In the scope of our doctoral research, business education is considered as an industry where business schools act as firms. Our thesis focuses on the strategic management field, with aims to explore how schools revisit their MBA curricula. Within this framework, joint and merged MBA programmes have been analysed as a counter point of Porter’s five forces (1980): rivalry among competitors, entry barriers, substitutions’ threats, buyers’ and suppliers’ bargaining power. ...

  10. The microstrip proportional counter

    Science.gov (United States)

    Ramsey, B. D.

    1992-01-01

    Microstrip detectors in which the usual discrete anode and cathode wires are replaced by conducting strips on an insulating or partially insulating substrate are fabricated using integrated circuit-type photolithographic techniques and hence offer very high spatial accuracy and uniformity, together with the capability of producing extremely fine electrode structures. Microstrip proportional counters have now been variously reported having an energy resolution of better than 11 percent FWHM at 5.9 keV. They have been fabricated with anode bars down to 2 microns and on a variety of substrate materials including thin films which can be molded to different shapes. This review will examine the development of the microstrip detector with emphasis on the qualities which make this detector particularly interesting for use in astronomy.

  11. Nanoporous Glass Integrated in Volumetric Bar-Chart Chip for Point-of-Care Diagnostics of Non-Small Cell Lung Cancer.

    Science.gov (United States)

    Li, Ying; Xuan, Jie; Song, Yujun; Qi, Wenjin; He, Bangshun; Wang, Ping; Qin, Lidong

    2016-01-26

    Point-of-care (POC) testing has the potential to enable rapid, low-cost, and large-scale screening. POC detection of a multiplexed biomarker panel can facilitate the early diagnosis of non-small cell lung cancer (NSCLC) and, thus, may allow for more timely surgical intervention for life-saving treatment. Herein, we report the nanoporous glass (NPG) integrated volumetric bar-chart chip (V-Chip) for POC detection of the three NSCLC biomarkers CEA, CYFRA 21-1, and SCCA, by the naked eye. The 3D nanostructures in the NPG membrane efficiently increase the number of binding sites for antibodies and decrease the diffusion distance between antibody and antigen, enabling the low detection limit and rapid analysis time of the NPG-V-Chip. We utilized the NPG-V-Chip to test the NSCLC biomarker panel and found that the limit of detection can reach 50 pg/mL (10-fold improvement over the original V-Chip), and the total assay time can be decreased from 4 to 0.5 h. We then detected CEA in 21 serum samples from patients with common cancers, and the on-chip results showed good correlation with the clinical results. We further assayed 10 lung cancer samples using the device and confirmed the results obtained using conventional ELISA methods. In summary, the NPG-V-Chip platform has the ability of multiplex, low detection limit, low cost, lack of need for accessory equipment, and rapid analysis time, which may render the V-Chip a useful platform for quantitative POC detection in resource-limited settings and personalized diagnostics.

  12. Riverbank erosion induced by gravel bar accretion

    Science.gov (United States)

    Klösch, Mario; Habersack, Helmut

    2010-05-01

    Riverbank erosion is known to be strongly fluvially controlled and determination of shear stresses at the bank surface and at the bank toe is a crucial point in bank erosion modeling. In many modeling attempts hydraulics are simulated separately in a hydrodynamic-numerical model and the simulated shear stresses are further applied onto the bank surface in a bank erosion model. Hydrodynamics are usually simulated at a constant geometry. However, in some cases bed geometry may vary strongly during the event, changing the conditions for hydrodynamics along the bank. This research seeks to investigate the effect of gravel bar accretion during high discharges on final bank retreat. At a restored section of the Drava River bed widenings have been implemented to counter bed degradation. There, in an initiated side-arm, self-dynamic widening strongly affects bed development and long-term connectivity to the main channel. Understanding the riverbank erosion processes there would help to improve planning of future restoration measures. At one riverbank section in the side-arm large bank retreat was measured repeatedly after several flow events. This section is situated between two groins with a distance of 60 m, which act as lateral boundaries to the self-widening channel. In front of this bank section a gravel bar developed. During low flow condition most discharge of the side-arm flows beside the gravel bar along the bank, but shear stresses are too low for triggering bank erosion. For higher discharges results from a two-dimensional hydrodynamic-numerical model suggested shear stresses there to be generally low during the entire events. At some discharges the modeled flow velocities even showed to be recirculating along the bank. These results didn't explain the observed bank retreat. Based on the modeled shear stresses, bank erosion models would have greatly underestimated the bank retreat induced by the investigated events. Repeated surveys after events applying

  13. Distributed performance counters

    Science.gov (United States)

    Davis, Kristan D; Evans, Kahn C; Gara, Alan; Satterfield, David L

    2013-11-26

    A plurality of first performance counter modules is coupled to a plurality of processing cores. The plurality of first performance counter modules is operable to collect performance data associated with the plurality of processing cores respectively. A plurality of second performance counter modules are coupled to a plurality of L2 cache units, and the plurality of second performance counter modules are operable to collect performance data associated with the plurality of L2 cache units respectively. A central performance counter module may be operable to coordinate counter data from the plurality of first performance counter modules and the plurality of second performance modules, the a central performance counter module, the plurality of first performance counter modules, and the plurality of second performance counter modules connected by a daisy chain connection.

  14. The AMS-01 Aerogel Threshold Cherenkov counter

    Energy Technology Data Exchange (ETDEWEB)

    Barancourt, D.; Barao, F.; Barbier, G.; Barreira, G.; Buenerd, M.; Castellini, G.; Choumilov, E.; Favier, J.; Fouque, N.; Gougas, A.; Hermel, V.; Kossakowski, R.; Laborie, G.; Laurenti, G.; Lee, S.-C.; Mayet, F. E-mail: frederic.mayet@isn.in2p3.fr; Meillon, B.; Oyang, Y.-T.; Plyaskin, V.; Pojidaev, V.; Rossin, C.; Santos, D.; Vezzu, F.; Vialle, J.P

    2001-06-11

    The Alpha Magnetic Spectrometer in a precursor version (AMS-01), was flown in June 1998 on a 51.6 deg. orbit and at altitudes ranging between 320 and 390 km, on board of the space shuttle Discovery (flight STS-91). AMS-01 included an Aerogel Threshold Cherenkov counter (ATC) to separate p-bar from e{sup -} and e{sup +} from p, for momenta below 3.5 GeV/c. This paper presents a description of the ATC counter and reports on its performances during the flight STS-91.

  15. Fast scintillation counters for the D0 muon system upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Baldin, B. [Fermi National Accelerator Lab., Batavia, IL (United States); Abramov, V.; Babintsev, V. [and others

    1999-08-01

    The design and main parameters of the completely redesigned D0 Forward Angle Muon System (FAMUS: 1.0 < {vert_bar}{eta}{vert_bar} < 2.0) for the next high luminosity Tevatron Collider run are reported. Results of the studies of trigger scintillation counters based on fast scintillator Bicron 404A and WLS bars SOFZ-105 are presented. The authors report about results of test beam studies of prototype counters including minimum ionizing particles detection efficiency, time resolution and amplitude response. Radiation ageing of scintillating materials for the doses up to 1 Mrad, phototubes magnetic shielding in the fields of up to 700 G and ageing of phototubes are presented. All tests show robustness of scintillation counters as triggering detector of the new muon system for a long period.

  16. Permanent traffic counters maintained by the NMDOT

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — A point dataset representing the permanent traffic counters maintained by the NMDOT. Event mapped dataset by LRS info provided by Traffic group.

  17. Quantum counter automata

    CERN Document Server

    Say, A C Cem

    2011-01-01

    The question of whether quantum real-time one-counter automata (rtQ1CAs) can outperform their probabilistic counterparts has been open for more than a decade. We provide an affirmative answer to this question, by demonstrating a non-context-free language that can be recognized with perfect soundness by a rtQ1CA. This is the first demonstration of the superiority of a quantum model to the corresponding classical one in the real-time case with an error bound less than 1. We also introduce a generalization of the rtQ1CA, the quantum one-way one-counter automaton (1Q1CA), and show that they too are superior to the corresponding family of probabilistic machines. For this purpose, we provide general definitions of these models that reflect the modern approach to the definition of quantum finite automata, and point out some problems with previous results. We identify several remaining open problems.

  18. Counter-cryptanalysis

    NARCIS (Netherlands)

    Stevens, M.M.J.; Canetti, R.; Garay, J.A.

    2013-01-01

    We introduce \\emph{counter-cryptanalysis} as a new paradigm for strengthening weak cryptographic primitives against cryptanalytic attacks. Redesigning a weak primitive to more strongly resist cryptanalytic techniques will unavoidably break backwards compatibility. Instead, counter-cryptanalysis expl

  19. CEDAR counter (internal part)

    CERN Multimedia

    1976-01-01

    Here on the mounting bench. The counter is a differential Cerenkov, corrected for chromaticity, able to differentiate pions from kaons up to 350 GeV. Counters of this type were used in all SPS hadron beams.

  20. A Gas Proportional Scintillation Counter with krypton filling

    Science.gov (United States)

    Monteiro, C. M. B.; Mano, R. D. P.; Barata, E. C. G. M.; Fernandes, L. M. P.; Freitas, E. D. C.

    2016-12-01

    A Gas Proportional Scintillation Counter filled with pure krypton was studied. Energy resolution below 10% for 5.9-keV X-rays was obtained with this prototype. This value is much better than the energy resolution obtained with proportional counters or other MPGDs with krypton filling. The krypton electroluminescence scintillation and ionisation thresholds were found to be about 0.5 and 3.5 kV cm-1bar-1, respectively.

  1. Research on the died center point position of Stephenson-Ⅲ six-bar linkage%Stephenson-Ⅲ六杆机构死点位置的研究

    Institute of Scientific and Technical Information of China (English)

    郭晓宁; 邹炎火; 窦宁

    2009-01-01

    当机构处于死点位置时,其机械效率等于0.文中基于机构机械效率与瞬心之间的关系,给出了机构处于死点住置时机构瞬心需满足的充要几何条件,全面讨论了Stephenson-Ⅲ型六杆机构所有可能发生死点的位置;它避免了处理复杂代数方程,并且在处理多杆机构时优越性更加明显,对于含有移动副的连杆机构也是可用的.%While a mechanism was situated in the dead center point, its mechanical advantage equals to zero. Based on the rela-tionship between mechanical advantage of mechanism and instanta-neous center the necessary and sufficient geometric conditions need to be satisfied for the instantaneous center of mechanism while the mechanism was situated in the dead center point position had been given out in this paper. All positions that the dead center point would happen in the Stephenson-Ⅲ typed six bar linkage have been discussed comprehensively. It avoided the handling of complex algebraic equations and there is even more evident superiority while dealing with the multi-bar linkage. It is also usable for link mecha-nism that contains moving pairs.

  2. [Nutritional characteristics of cereal and peanut bars].

    Science.gov (United States)

    Escobar, B; Estévez, A M; Tepper, A; Aguayo, M

    1998-06-01

    Snack with good nutritional value could play an important role in the physical and mental development of children and teenagers since they show a great preference for them. The tendency is increasing their nutritional value by supplying proteins, carbohydrates, fiber, vitamins and minerals in a balanced form. The purpose of this research was to evaluate the chemical, sensorial and nutritional quality of cereal and peanut bars. Three types of bars using different ratios of oat, wheat germ, peanut, toasted and expanded amaranthus and wheat extrudate were prepared. Bars proximate composition was determined according the AOAC methods, and their acceptability according Hedonic Scale. In the biological assays, rats fed with 10% protein diets, were used to obtain the Protein Efficiency Ratio (PER) Net Protein Ratio (NPR) and Apparent Digestibility (AD). Corrected PER, relative PER, relative AD, PER and NPR values did not showed difference between bars CM1 and CM2 (PER: 2.59-2.57; NPR: 3.99-3.95 respectively); CM3 bar showed a lower quality. There were not differences among bars in relation to AD. CM1 and CM2 bars had a better biological quality of the protein being CM3 bar of lower quality. From a chemical and sensorial point of view CM1 bar shows the highest protein content (14.23%) and acceptability (6.8) and CM2 bar shows a high raw fiber content (2.27%).

  3. FLEXIBLE GEIGER COUNTER

    Science.gov (United States)

    Richter, H.G.; Gillespie, A.S. Jr.

    1963-11-12

    A flexible Geiger counter constructed from materials composed of vinyl chloride polymerized with plasticizers or co-polymers is presented. The counter can be made either by attaching short segments of corrugated plastic sleeving together, or by starting with a length of vacuum cleaner hose composed of the above materials. The anode is maintained substantially axial Within the sleeving or hose during tube flexing by means of polystyrene spacer disks or an easily assembled polyethylene flexible cage assembly. The cathode is a wire spiraled on the outside of the counter. The sleeving or hose is fitted with glass end-pieces or any other good insulator to maintain the anode wire taut and to admit a counting gas mixture into the counter. Having the cathode wire on the outside of the counter substantially eliminates the objectional sheath effect of prior counters and permits counting rates up to 300,000 counts per minute. (AEC)

  4. Countering Internet Extremism

    Science.gov (United States)

    2009-01-01

    literally examine hundreds of books and speeches. Since the purpose of this work is examining ways to counter an extremist’s Internet use of the...provide differing perspectives on how to counter extremist Internet use . A 2008 New York Times article indirectly offers some methods. Writers Eric...or scholars have the most potential to effectively counter extremist Internet use . Such efforts could help to stifle some of the issues that

  5. Barred Owl [ds8

    Data.gov (United States)

    California Department of Resources — These data define the current range of Barred and hybrid Barred/Spotted Owls in California. The current range includes the coastal mountains of northern California...

  6. Analog floating-point BiCMOS sampling chip and architecture of the BaBar CsI calorimeter front-end electronics system at the SLAC B-Factory

    Energy Technology Data Exchange (ETDEWEB)

    Haller, G.M.; Freytag, D.R. [Stanford Univ., CA (United States). Stanford Linear Accelerator Center

    1996-06-01

    The design and implementation of an analog floating-point sampling integrated circuit for the BaBar detector at the SLAC B-Factory is described. The CARE (Custom Auto-Range Encoding) circuit is part of an 18-bit dynamic range sampling system with a 4-MHz waveform digitization rate for the CsI calorimeter. The architecture and methodology of the system are described. The CARE integrated circuit receives dual-range (gain of 1 and 32) 13-bit signals from the 18-bit range preamplifiers mounted directly on the CsI crystals and converts the input at a rate of 4 MHz to an auto-range floating-point format with a 10-bit analog mantissa and 2 digital range bits (for 4 ranges). Additional functions integrated on the chip are averaging and selection circuitry for signals originating from two independent diodes per crystal and range-selection overwrite circuitry. The circuit will be mounted within the detector structure and thus low power dissipation is essential. The circuit has been fabricated in a 1.2 {micro}m BiCMOS process with polysilicon-to-polysilicon capacitors and polysilicon resistors. Measurement results are presented. One complete CARE channel dissipates 25 mW.

  7. Anticoincidence scintillation counter

    CERN Multimedia

    1966-01-01

    This anticoincidence scintillation counter will be mounted in a hydrogen target vessel to be used in a measurement of the .beta. parameter in the .LAMBDA0. decay. The geometry of the counter optimizes light collection in the central part where a scintillation disk of variable thickness can be fitted.

  8. Proportional counter radiation camera

    Science.gov (United States)

    Borkowski, C.J.; Kopp, M.K.

    1974-01-15

    A gas-filled proportional counter camera that images photon emitting sources is described. A two-dimensional, positionsensitive proportional multiwire counter is provided as the detector. The counter consists of a high- voltage anode screen sandwiched between orthogonally disposed planar arrays of multiple parallel strung, resistively coupled cathode wires. Two terminals from each of the cathode arrays are connected to separate timing circuitry to obtain separate X and Y coordinate signal values from pulse shape measurements to define the position of an event within the counter arrays which may be recorded by various means for data display. The counter is further provided with a linear drift field which effectively enlarges the active gas volume of the counter and constrains the recoil electrons produced from ionizing radiation entering the counter to drift perpendicularly toward the planar detection arrays. A collimator is interposed between a subject to be imaged and the counter to transmit only the radiation from the subject which has a perpendicular trajectory with respect to the planar cathode arrays of the detector. (Official Gazette)

  9. The first CEDAR counter

    CERN Multimedia

    1976-01-01

    The first differential Cerenkov counter with chromatic corrections (called CEDAR) successfully tested at the PS in July 75. These counters were used in the SPS hadronic beams for particle identification. Some of the eight photomultipliers can be seen: they receive the light reflected back through the annular diaphragm. René Maleyran stands on the left.

  10. Bathroom Buddies: Countering your Clockwise Rotation

    Science.gov (United States)

    Cooper, C. M.; Stegman, D. R.

    2006-12-01

    Which way does your bathtub, toilet, sink, or other favorite plumbing basin drain? Popular television shows perpetuate the fact that water spins the opposite direction in the southern hemisphere, and sometimes even explicitly point to the Coriolis effect (or Earth's rotation) as the cause. Skeptics disagree: "No way. Water doesn't obey your rules: it goes where it wants...like me, babe." [1]. Fact: Cyclones rotate clockwise in the southern hemisphere and hurricanes counter-clockwise in the northern hemisphere. But does your hemisphere also determine the direction water spirals down your toilet? In the ideal scenario of water draining out a sink (i.e. a defect-free, perfectly-leveled basin in which water has remained undisturbed for sufficient enough time to quiet any background motions or eddies) --- then yes, maybe it is possible. However, in everyday life, not even the most decadent of bathtubs provide us a large enough lengthscale to observe the Coriolis effect on the direction which water spirals towards the drain. Thus, we are left confronting the possibility that something heard on television isn't true. But is just "telling" students, friends, or strangers in bars enough to debunk this urban myth? Rather, we offer a practical demonstration involving a friend from the opposite hemisphere (if not one in existence, then find one on the internet!), a bathroom, a funnel, a bucket, some food coloring, a camera, a pitcher and some equations and scalings for extra credit and fun. 1) Simpson, B., "Bart vs. Australia", Season 6, Episode 119, 1995.

  11. On Modified Bar recursion

    DEFF Research Database (Denmark)

    Oliva, Paulo Borges

    2002-01-01

    Modified bar recursion is a variant of Spector's bar recursion which can be used to give a realizability interpretation of the classical axiom of dependent choice. This realizability allows for the extraction of witnesses from proofs of forall-exists-formulas in classical analysis. In this talk I...... shall report on results regarding the relationship between modified and Spector's bar recursion. I shall also show that a seemingly weak form of modified bar recursion is as strong as "full" modified bar recursion in higher types....

  12. Measurement of the Collimated Beam Pointing Among Bars for Diode Laser Vertical Stack%垂直阵列DL巴间准直光束指向精度测量方法

    Institute of Scientific and Technical Information of China (English)

    郭林辉; 吕文强; 高松信; 武德勇; 李弋; 李艾; 蒋建锋; 彭勇

    2011-01-01

    High power diode laser vertical stack's collimated beam pointing error and the influence of the pointing on the laser beam are introduced. The experimental device is built, and single anastigmatic far field lens are adopted to collect the light spot of the vertical stacking. By combining the centroid arithmetic measured continuous work 2 kW vertical stacking diode laser, the results of collimation beam's pointing accuracy was ±1.7 mrad. The errors of the metrical method are analyzed and some routes are optimized to improve the metrical method.%简介了大功率二极管激光器垂直阵列巴条(Bar)间准直光束指向精度问题,及其对激光器垂直阵列输出光束的影响.采用单透镜远场探测系统对激光器垂直阵列远场光斑进行采集,搭建了实验测试装置.结合光斑强度质心算法对实验室封装的20巴条连续输出2 kw二极管激光器垂直阵列进行了测量,测试结果为巴间准直光束指向精度±1.7 mrad,结合二极管激光器封装工艺分析了测试结果,并对该测量方法进行了讨论分析,提出了优化该测试方法的途径.

  13. [Development of cereal bar with pineapple skin].

    Science.gov (United States)

    Fonseca, Renata Siqueira; Del Santo, Victor Rogério; Souza, Gilberto Batista de; Pereira, Cíntia Alessandra Matiucci

    2011-06-01

    The cereal bars are multi-component products consisting of cereals, dried fruit and syrup binder and may be added to the consumable parts of fruits and vegetables which usually are not exploited and have high nutritional value, thereby reducing food waste. It was developed a jam with pineapple skin, which it was utilized in 13.5% in the cereal bar formulation. The cereal bar was sensorial evaluated and had its centesimal and mineral composition determined. The new product achieved average of 8.3 for global impression using 9 points hedonic scale, 91% of acceptance rate and 67% of purchase intent. In this first use of pineapple skin jam as food ingredient it can be concluded that its aggregation in the cereal bar formula is feasible, making an accepted product with fibers, proteins and minerals, as an alternative to traditional cereal bars.

  14. Observation of B0bar --> D0 K0bar and B0bar --> D0 K*0bar decays

    CERN Document Server

    Krokovnyi, P P

    2003-01-01

    We report on a search for B0bar --> D0 K(*)0bar decays based on 85 10^6 BBar events collected with the Belle detector at KEKB. The B0bar --> D0 K0bar and B0bar --> D0 K*0bar decays have been observed for the first time with the branching fractions Br(B0bar --> D0 K0bar) = (5.0^{+1.3}_{-1.2}+- 0.6) 10^{-5} and Br(B0bar --> D0 K*0bar) = (4.8^{+1.1}_{-1.0}+- 0.5) 10^{-5}. No significant signal has been found for the B0bar --> D*0 K(*)0bar and B0bar --> D(*)0bar K*0bar decay modes, and upper limits at 90% CL are presented.

  15. Constraints from microlensing on the COBE bar

    Science.gov (United States)

    Zhao, H. S.

    Since the first review of converging evidences for a bar in the center of the Galaxy by de Zeeuw (1992) at the IAU Sym. 153 in Gent five years ago, the Galactic bar idea has been put on a solid footing by an influx of new data (COBE/DIRBE maps, star count data of bulge red clump giants, microlensing optical depth, and bulge stellar proper motions, etc.) and a burst of increasingly sophisticated theoretical models (triaxial luminosity models of Dwek et al. 1994, and Binney, Gerhard & Spergel 1997, steady state stellar bar dynamical model of Zhao 1996, combined luminosity, microlensing and gas kinematics models of Zhao, Rich & Spergel 1996, and Bissantz et al. 1997, etc.), which fit new data and improve upon earlier simple bulge/bar models (Kent 1992, Binney et al. 1991, Blitz & Spergel 1991). While research in this field shifts more and more to constraining the exact phase space and parameter space of the bar, both the non-uniqueness of and the mismatches among bars from different datasets start to show up. I compare the bar from microlensing data with the COBE bar and point out the effects the non-uniqueness.

  16. The four bars problem

    Science.gov (United States)

    Mauroy, Alexandre; Taslakian, Perouz; Langerman, Stefan; Jungers, Raphaël

    2016-09-01

    A four-bar linkage is a mechanism consisting of four rigid bars which are joined by their endpoints in a polygonal chain and which can rotate freely at the joints (or vertices). We assume that the linkage lies in the 2-dimensional plane so that one of the bars is held horizontally fixed. In this paper we consider the problem of reconfiguring a four-bar linkage using an operation called a pop. Given a four-bar linkage, a pop reflects a vertex across the line defined by its two adjacent vertices along the polygonal chain. Our main result shows that for certain conditions on the lengths of the bars, the neighborhood of any configuration that can be reached by smooth motion can also be reached by pops. The proof relies on the fact that pops are described by a map on the circle with an irrational number of rotation.

  17. A large Cerenkov counter

    CERN Multimedia

    1981-01-01

    The photo shows the vertex Cerenkov counter C0 back side (with 12 mirrors) of the NA9 experiment. On foreground are members of the team (CERN and Wuppertal Uni), Salvo .., Manfred Poetsch, ..., Jocelyn Thadome, Helmut Braun, Heiner Brueck.

  18. Counter-cryptanalysis

    NARCIS (Netherlands)

    M.M.J. Stevens (Marc); R. Canetti; J.A. Garay

    2013-01-01

    textabstractWe introduce \\emph{counter-cryptanalysis} as a new paradigm for strengthening weak cryptographic primitives against cryptanalytic attacks. Redesigning a weak primitive to more strongly resist cryptanalytic techniques will unavoidably break backwards compatibility. Instead,

  19. Bar and Theta Hyperoperations

    Directory of Open Access Journals (Sweden)

    Thomas Vougiouklis

    2011-12-01

    Full Text Available In questionnaires the replacement of the scale of Likert by a bar was suggested in 2008 by Vougiouklis & Vougiouklis. The use of the bar was rapidly accepted in social sciences. The bar is closely related with fuzzy theory and has several advantages during both the filling-in questionnaires and mainly in the research processing. In this paper we relate hyperstructure theory with questionnaires and we study the obtained hyperstructures which are used as an organising device of the problem.

  20. Comparison of a designed virtual counter with a real counter

    Science.gov (United States)

    Tektas, G.; Celiktas, C.

    2017-02-01

    A counter is a device which counts the incident pulses within a fixed time. In this work, a virtual counter was designed by developing a code by LabVIEW software. Generator signals were sent to the virtual counter via a National Instruments multifunction data acquisition device. Analog and PFI (Programmable Function Interface) inputs of the device was used for the process. A real counter was also used for comparison. Counts acquired from both counters in different time intervals were compared with each other. It was concluded from the obtained results that the developed virtual counter could be used as a real counter.

  1. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony,

    2013-01-01

    International audience; Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar and...

  2. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony,

    2013-01-01

    International audience; Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar and...

  3. The influence of the environment on bar formation

    CERN Document Server

    Mendez-Abreu, J; Zarattini, S; Sanchez-Janssen, R; Corsini, E M

    2009-01-01

    Galaxy mergers and interactions are mechanisms which could drive the formation of bars. Therefore, we could expect that the fraction of barred galaxies increases with the local density. Here we show the first results of an extensive search for barred galaxies in different environments. We conclude that the bar fraction on bright (L>L*) field, Virgo, and Coma cluster galaxies is compatible. These results point towards an scenario where the formation and/or evolution of bars depend mostly on internal galaxy processes rather than external ones.

  4. Bar-tailed

    NARCIS (Netherlands)

    Duijns, S.; Hidayati, N.A.; Piersma, T.

    2013-01-01

    Capsule Across the European wintering range Bar-tailed Godwits Limosa lapponica lapponica selected polychaete worms and especially Ragworms Hediste diversicolor, with differences between areas due to variations in prey availability.Aims To determine the diet of Bar-tailed Godwits across their winter

  5. Short Nuss bar procedure

    DEFF Research Database (Denmark)

    Pilegaard, Hans Kristian

    2016-01-01

    The Nuss procedure is now the preferred operation for surgical correction of pectus excavatum (PE). It is a minimally invasive technique, whereby one to three curved metal bars are inserted behind the sternum in order to push it into a normal position. The bars are left in situ for three years...

  6. How Different are Normal and Barred Spirals?

    CERN Document Server

    Bergh, Sidney van den

    2011-01-01

    No significant color differences are found between normal and barred spirals over the range of Hubble stages a - ab - b - bc. Furthermore, no significant difference is seen between the luminosity distributions of normal and barred galaxies over the same range of Hubble stages. However, SBc galaxies are found to be systematically fainter than Sc galaxies at 99% confidence. The observation that normal and barred spirals with Hubble stages a - ab - b - bc have indistinguishable intrinsic colors hints at the possibility that the bars in such spiral galaxies might be ephemeral structures. Finally, it is pointed out that lenticular galaxies of types S0 and SB0 are systematically fainter than are other early-type galaxies, suggesting that such galaxies are situated on evolutionary tracks that differ systematically from those of galaxies that lie along the E - Sa - Sb -Sc and E - SBa - SBb - SBc sequences.

  7. Blast Quantification Using Hopkinson Pressure Bars.

    Science.gov (United States)

    Clarke, Samuel D; Fay, Stephen D; Rigby, Samuel E; Tyas, Andrew; Warren, James A; Reay, Jonathan J; Fuller, Benjamin J; Gant, Matthew T A; Elgy, Ian D

    2016-07-05

    Near-field blast load measurement presents an issue to many sensor types as they must endure very aggressive environments and be able to measure pressures up to many hundreds of megapascals. In this respect the simplicity of the Hopkinson pressure bar has a major advantage in that while the measurement end of the Hopkinson bar can endure and be exposed to harsh conditions, the strain gauge mounted to the bar can be affixed some distance away. This allows protective housings to be utilized which protect the strain gauge but do not interfere with the measurement acquisition. The use of an array of pressure bars allows the pressure-time histories at discrete known points to be measured. This article also describes the interpolation routine used to derive pressure-time histories at un-instrumented locations on the plane of interest. Currently the technique has been used to measure loading from high explosives in free air and buried shallowly in various soils.

  8. An efficient anticoincidence counter

    CERN Multimedia

    1977-01-01

    This scintillation counter (about 25 cm diameter) was prepared at CERN for an experiment at the Saclay 600 MeV electron linac studying molecular processes originated in liquid hydrogen by muons. The counter is meant to surround the target and detect charged particles emerging from the hydrogen. The experiment was a CERN-Saclay collaboration which used the linac so as to take advantage of the time structure of the electron beam(see CERN Courier Sep 1977 and J. Bardin et al. Phys. Lett. B104 (1981) 320)

  9. The relation between bar formation, galaxy luminosity, and environment

    CERN Document Server

    Corsini, E M; Sanchez-Janssen, R; Aguerri, J A L; Zarattini, S

    2013-01-01

    We derive the bar fraction in three different environments ranging from the field to Virgo and Coma clusters, covering an unprecedentedly large range of galaxy luminosities (or, equivalently, stellar masses). We confirm that the fraction of barred galaxies strongly depends on galaxy luminosity. We also show that the difference between the bar fraction distributions as a function of galaxy luminosity (and mass) in the field and Coma cluster are statistically significant, with Virgo being an intermediate case. We interpret this result as a variation of the effect of environment on bar formation depending on galaxy luminosity. We speculate that brighter disk galaxies are stable enough against interactions to keep their cold structure, thus, the interactions are able to trigger bar formation. For fainter galaxies the interactions become strong enough to heat up the disks inhibiting bar formation and even destroying the disks. Finally, we point out that the controversy regarding whether the bar fraction depends on...

  10. Counter-streaming radiative shock experiments on the Orion laser

    Science.gov (United States)

    Suzuki-Vidal, F.; Clayson, T.; Swadling, G. F.; Patankar, S.; Burdiak, G. C.; Lebedev, S. V.; Smith, R. A.; Stehle, C.; Chaulagain, U.; Singh, R. L.; Larour, J.; Kozlova, M.; Spindloe, C.; Foster, J.; Skidmore, J.; Gumbrell, E.; Graham, P.; Danson, C.

    2016-10-01

    The formation of radiative shocks, shocks in which the structure of density and temperature is affected by radiation from the shock-heated matter, is ubiquitous in many astrophysical scenarios. Experiments were performed at the Orion laser using a new target configuration that allows studying the formation of single and counter-streaming radiative shocks in gas-filled targets (Ne, Ar, Kr, Xe), with initial pressures 0.1-1 bar and a driver intensity of 6x1014 W/cm2 . The shocks propagate at velocities >60 km/s and were diagnosed with optical interferometry (streaked and time-resolved) and point-projection X-ray backlighting allowing to probe simultaneously the pre-shock radiative precursor and the shock front itself. Besides varying the extent of the radiative precursor the results show that different gases seem to have an effect on the shock front as evidenced by a number of spatial features. The results are compared with radiative hydrodynamics simulations in 1-D (HELIOS) and 2-D (NYM/PETRA). Supported by Orion Academic Access, the Royal Society, EPSRC, Labex PLAS@PAR. Currently at (2) LLNL, USA, (3) ELI, CZ, (4) First Light Fusion, UK.

  11. Geiger Counter Technique

    Science.gov (United States)

    1942-01-01

    is a Genco HIyvac and is backed by a single stage oil diffusion punp. The mercury well is emnloyed as a pump and mixing chamber, providing a means of...system, after first being puaped down, is filled to ovar-priees-e with Argan . re counter is then pullet off the ribber tubing a few dorps of ether are

  12. Sports Season, Sports Bars

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ For foreigners in Beijing, the sports bar is a special place, a place to gather for watching matches and a place to feel the familiarity of home, while for some sports enthusiasts it serves as their second home.

  13. Short Nuss bar procedure

    Science.gov (United States)

    2016-01-01

    The Nuss procedure is now the preferred operation for surgical correction of pectus excavatum (PE). It is a minimally invasive technique, whereby one to three curved metal bars are inserted behind the sternum in order to push it into a normal position. The bars are left in situ for three years and then removed. This procedure significantly improves quality of life and, in most cases, also improves cardiac performance. Previously, the modified Ravitch procedure was used with resection of cartilage and the use of posterior support. This article details the new modified Nuss procedure, which requires the use of shorter bars than specified by the original technique. This technique facilitates the operation as the bar may be guided manually through the chest wall and no additional stabilizing sutures are necessary. PMID:27747185

  14. Countering rumors about contraceptives.

    Science.gov (United States)

    Del Rosario, M L

    1976-01-01

    Rumors are among the serious problems of the National Population Program today. The principles related to the origin of rumors, who starts rumors pertaining to family planning, and how they spread are outlined. The basic approach in countering rumors for the pill and IUD is diagrammed so that each potential rumor is countered by a medical or nonmedical/technical explanation. Strategies used by information-education-communication programs to prevent rumors such as the small group discussion, selection and training of motivators, and use of mass media are discussed. Rumors about family planning are counteracted not with the use of elaborate techniques but with clear and fairly simple reassurances supported by medical evidence and case histories.

  15. BAR-MOM Code and Its Application

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    BAR-MOM [1,2] code to calculate the height of the fission barrier Bf, the energy of the ground state, the compound nucleus stability by limit with respect to fission, i.e., the angular momentum(the spin value) Lmax at which the fission barrier disappears, the three principal axis moments of inertia at saddle point for a certain nucleus with atomic number Z, atomic mass number and angular momentum L for 19BAR-MOM code to include the results for Z≥102[3] by using more recent parameterization of the Thomas Fermi fission

  16. Error bars in experimental biology.

    Science.gov (United States)

    Cumming, Geoff; Fidler, Fiona; Vaux, David L

    2007-04-09

    Error bars commonly appear in figures in publications, but experimental biologists are often unsure how they should be used and interpreted. In this article we illustrate some basic features of error bars and explain how they can help communicate data and assist correct interpretation. Error bars may show confidence intervals, standard errors, standard deviations, or other quantities. Different types of error bars give quite different information, and so figure legends must make clear what error bars represent. We suggest eight simple rules to assist with effective use and interpretation of error bars.

  17. Gaseous Structures in Barred Galaxies: Effects of the Bar Strength

    CERN Document Server

    Kim, Woong-Tae; Kim, Yonghwi

    2012-01-01

    Using hydrodynamic simulations, we investigate the physical properties of gaseous substructures in barred galaxies and their relationships with the bar strength. The gaseous medium is assumed to be isothermal and unmagnetized. The bar potential is modeled as a Ferrers prolate with index n. To explore situations with differing bar strength, we vary the bar mass fbar relative to the spheroidal component as well as its aspect ratio. We derive expressions as functions of fbar and the aspect ratio for the bar strength Qb and the radius r(Qb) where the maximum bar torque occurs. When applied to observations, these expressions suggest that bars in real galaxies are most likely to have fbar=0.25-0.5 and n0.2 and self-gravity is included.

  18. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, Paul; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second pap

  19. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, Paul; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second pap

  20. Raising the Bar (3)

    NARCIS (Netherlands)

    Elhorst, Paul; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    This editorial summarizes and comments on the papers published in issue 11(3) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper proposes spatial and a-spatial indicators to describe the networks of airline companies around the world. The second

  1. Highest Oxygen Bar

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The world’s highest altitude Lhalu Wetland in Tibet is rebounding from past environmental damage In Lhasa, where the oxygen content is just 60 percent of that of the plain area, a place known as the "natural oxygen bar"is highly prized by residents.

  2. Raising the bar (2)

    NARCIS (Netherlands)

    Elhorst, P.; Abreu, M.; Amaral, P.; Bhattacharjee, A.; Corrado, L.; Fingleton, B.; Fuerst, F.; Garretsen, H.; Igliori, D.; Le Gallo, J.; McCann, P.; Monastiriotis, V.; Pryce, G.; Yu, J.

    2016-01-01

    In this editorial we summarise and comment on the papers published in issue 11.2 so as to raise the bar in applied spatial economic research and highlight new trends. The first paper analyses which regions in Europe were resilient to the great Recession and which ones were not. The second and the th

  3. Electromagnetic shower counter

    CERN Multimedia

    1974-01-01

    The octogonal block of lead glass is observed by eight photomultiplier tubes. Four or five such counters, arranged in succession, are used on each arm of the bispectrometer in order to detect heavy particles of the same family as those recently observed at Brookhaven and SLAC. They provide a means of identifying electrons. The arrangement of eight lateral photomultiplier tubes offers an efficient means of collecting the photons produced in the showers and determining, with a high resolution, the energy of the incident electrons. The total width at half-height is less than 6.9% for electrons having an energy of 1 GeV.

  4. Silicon photomultipliers in AMIGA muon counters

    Energy Technology Data Exchange (ETDEWEB)

    Botti, Ana Martina [Institut fuer Kernphysik, Karlsruher Institut fuer Technologie (Germany); Instituto de Tecnologias en Deteccion y Astroparticulas (ITeDA) (Argentina); Collaboration: Pierre-Auger-Collaboration

    2016-07-01

    The project AMIGA (Auger Muons and Infill for the Ground Array) aims to extend the energy range at the Pierre Auger Observatory to observe cosmic rays of lower energies (down to ∝10{sup 17} eV) and to study the transition from extragalactic to galactic cosmic rays. AMIGA is compounded by an infill of surface detectors (employing Cherenkov radiation detection in water) and muon counters. The AMIGA muon counters consist of an array of buried modules composed of 64 scintillator bars, a multi-pixel Photo Multiplier Tube (PMT) and the corresponding electronic of acquisition which works along with the surface detector. Currently, ITeDA is evaluating the feasibility of replacing PMTs with silicon photomultipliers (SiPM) without performing any substantial modification in the digital readout nor in the mechanical design. I present calibration results of a prototype module associated to the surface detector Toune of the Pierre Auger Observatory using a SiPM Hamamatsu S1257-100C plugged to the standard AMIGA front-end electronics. In addition, a study concerning gain stability and temperature variation has also been performed and is reported. I finally discuss a comparison between traces measured by both photodetectors (PMT and SiPM) for modules associated to the surface detector Toune.

  5. Mono-top Signature from Supersymmetric $t \\bar t H$ Channel

    CERN Document Server

    Gonçalves, Dorival; Takeuchi, Michihisa

    2016-01-01

    We point out that a distinctive mono-top signature is present in Natural SUSY scenarios when a scalar top-quark and higgsinos are almost mass degenerate. This signature originates from a supersymmetric counter part of the $t \\bar t H$ process, i.e. $pp \\to \\tilde t t \\tilde h$. Unlike mono-jet signatures exploiting initial state radiation, this channel can be regarded as a smoking gun signature of a light stop and higgsinos, allowing a direct probe of the stop and neutralino sectors. The production rate of this channel largely depends on the up-type higgsino components in the neutralinos while the stop sector is sensitive to angular distributions of top-quark's decay products. We develop an optimal search strategy to capture the supersymmetric $t \\bar t H$ process and find that a high luminosity LHC can probe the stop and higgsino sectors with $m_{\\tilde t_1} \\lesssim 380$ GeV and $m_{\\tilde t_1} - m_{\\tilde \\chi_1^0} \\lesssim m_W$. Additionally, we propose a kinematic variable with which one can measure the ...

  6. Consumer Preferences for High Welfare Meat in Germany: Self-service Counter or Service Counter?

    Directory of Open Access Journals (Sweden)

    Ramona Weinrich

    2015-01-01

    Full Text Available Many people view animal welfare standards in the agricultural industry as critical and some consumers would prefer to buy high welfare meat. In order to successfully introduce high welfare meat products onto the market, some important marketing decisions must be made. Due to limited shelf space in retail outlets, niche products like high welfare meat cannot be placed both at the self-service counter and at the service counter. In order to analyze where to place it best an online survey of 642 German consumers was conducted. By means of factor and cluster analyses, consumers’ animal welfare attitudes and their preference for a point of purchase were combined. The different target groups were joint using cross tabulation analysis. The results reveal that consumers in the target group show a more positive attitude to the service counter.

  7. Measurement of the $\\bar{p}p \\rightarrow \\bar{n}n$ Charge-Exchange Differential Cross-Section

    CERN Multimedia

    2002-01-01

    The aim of this proposal is a measurement of the differential cross-section of the $\\bar{p}$p $\\rightarrow$ $\\bar{n}$n charge-exchange reaction with a point-to-point precision of 1\\% in the forward direction, and an absolute normalization error of 3\\%. The high precision of the data should allow, inter alia, a determination of the $\\pi$NN coupling constant to better than 2\\%.\\\\ \\\\ The measurement will be done using the existing neutron and antineutron detectors built for experiment PS199 and liquid hydrogen target. In one week of running time, with a $\\bar{p}$ beam intensity of 3 $ 10 ^{5} $ $\\bar{p}$/sec, the reaction will be measured at a few $\\bar{p}$ momenta, in the range 500 to 900~MeV/c.

  8. Multiple bars and secular evolution

    Science.gov (United States)

    Shen, Juntai

    2015-03-01

    Bars are the most important driver of secular evolution. A significant fraction of barred galaxies also harbor small secondary bars. Secondary bars are visible even in near-infrared images, so they are not just dusty and blue, but stellar features (Erwin & Sparke 2002). Since they are quite common, secondary bars are probably long-lived stellar features. The random relative orientation of the two bars indicates that they are dynamically decoupled with different pattern speeds (Buta & Crocker 1993). Corsini et al. (2003) presented conclusive direct kinematic evidence for a decoupled secondary bar in NGC 2950. Dynamically decoupled secondary bars have long been hypothesized to be a mechanism to drive gas past the ILR of primary bars to feed active galactic nuclei (Shlosman et al. 1989). However, the dynamics of secondary bars are still not well understood, and it is still unclear what role secondary bars play in the AGN fueling process. Numerical simulations offer the best approach to understanding double-barred systems. Decoupled secondary bar in the earlier gaseous simulations only last a short time (body simulations are preferred to further our understanding of double-barred systems. Debattista & Shen (2007) and Shen & Debattista (2009) managed to form long-lived double-barred systems with purely collisionless simulations, where a pre-existing rotating pseudo-bulge is introduced initially. The shape and size of secondary bars in the models are comparable to observed ones. They found that the rotation of the two bars is not rigid. The amplitude and pattern speed of the secondary bars oscillate as they rotate through their primary counterparts. Although the secondary bar rotates faster than the primary bar in this model, the stellar velocity field in the central region only shows a weakly twisted kinematic minor axis. Recently more simulations of double-barred galaxies with simpler initial conditions are explored (Du, Shen & Debattista 2014). We expect that the new

  9. Counter-Rotating Accretion Discs

    OpenAIRE

    Dyda, Sergei; Lovelace, Richard V. E.; Ustyugova, Galina V.; Romanova, Marina M.; Koldoba, Alexander V.

    2014-01-01

    Counter-rotating discs can arise from the accretion of a counter-rotating gas cloud onto the surface of an existing co-rotating disc or from the counter-rotating gas moving radially inward to the outer edge of an existing disc. At the interface, the two components mix to produce gas or plasma with zero net angular momentum which tends to free-fall towards the disc center. We discuss high-resolution axisymmetric hydrodynamic simulations of a viscous counter-rotating disc for cases where the tw...

  10. Error bars in experimental biology

    OpenAIRE

    2007-01-01

    Error bars commonly appear in figures in publications, but experimental biologists are often unsure how they should be used and interpreted. In this article we illustrate some basic features of error bars and explain how they can help communicate data and assist correct interpretation. Error bars may show confidence intervals, standard errors, standard deviations, or other quantities. Different types of error bars give quite different information, and so figure legends must make clear what er...

  11. Hough-based model for recognizing bar charts in document images

    Science.gov (United States)

    Zhou, YanPing; Tan, Chew Lim

    2000-12-01

    Bar charts are the most basic graphic representation for scientific data in technical and business papers. The objective of bar chart recognition in document image analysis is to extract graphics and text primitives structurally, then to correlate graphic interpretative information with text primitives semantically. This paper proposes a new model for generic bar chart recognition. We first change the image space into the Hough space by applying Hough Transform on the feature points. Then we use hypothesis-testing bar pattern searching algorithm to detect the bar patterns. We also apply a new text primitives grouping algorithm to extract text primitives. Finally, we interpret bar primitives by correlating them with corresponding text primitives like human's visual processing. The results show that the new model can recognize bar charts lying in any orientations, such as slant bar charts, or even hand-drawn bar charts.

  12. 40 CFR 417.190 - Applicability; description of the manufacture of detergent bars and cakes subcategory.

    Science.gov (United States)

    2010-07-01

    ... manufacture of detergent bars and cakes subcategory. 417.190 Section 417.190 Protection of Environment... POINT SOURCE CATEGORY Manufacture of Detergent Bars and Cakes Subcategory § 417.190 Applicability; description of the manufacture of detergent bars and cakes subcategory. The provisions of this subpart...

  13. Membrane biology: fission behind BARs.

    Science.gov (United States)

    Haucke, Volker

    2012-06-05

    Membrane bending is accomplished in part by amphipathic helix insertion into the bilayer and the assembly of BAR domain scaffolds preparing the membrane for fission. Two recent studies highlight the roles of amphipathic helices and BAR scaffolds in membrane fission and establish the structural basis of membrane bending by the N-BAR protein endophilin.

  14. Observations of offshore bar decay

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian

    2010-01-01

    Long-term, net offshore bar migration is a common occurrence on many multiple-barred beaches. The first stage of the process involves the generation of a longshore bar close to the shoreline that oscillates about a mean position for some time, followed by a stage of net offshore migration across...

  15. Dark Matter Trapping by Stellar Bars: The Shadow Bar

    Science.gov (United States)

    Petersen, Michael S.; Weinberg, Martin D.; Katz, Neal

    2016-09-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of three over the rate predicted by dynamical friction with an untrapped dark halo, and thus provides a possible physical explanation for the observed prevalence of fast bars in nature.

  16. Dark Matter Trapping by Stellar Bars: The Shadow Bar

    CERN Document Server

    Petersen, Michael S; Katz, Neal

    2016-01-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of three over the naive dynamical friction prediction, and thus provides a possible physical explanation for the observed prevalence of fast bars in nat...

  17. Dark matter trapping by stellar bars: the shadow bar

    Science.gov (United States)

    Petersen, Michael S.; Weinberg, Martin D.; Katz, Neal

    2016-12-01

    We investigate the complex interactions between the stellar disc and the dark-matter halo during bar formation and evolution using N-body simulations with fine temporal resolution and optimally chosen spatial resolution. We find that the forming stellar bar traps dark matter in the vicinity of the stellar bar into bar-supporting orbits. We call this feature the shadow bar. The shadow bar modifies both the location and magnitude of the angular momentum transfer between the disc and dark matter halo and adds 10 per cent to the mass of the stellar bar over 4 Gyr. The shadow bar is potentially observable by its density and velocity signature in spheroid stars and by direct dark matter detection experiments. Numerical tests demonstrate that the shadow bar can diminish the rate of angular momentum transport from the bar to the dark matter halo by more than a factor of 3 over the rate predicted by dynamical friction with an untrapped dark halo, and thus provides a possible physical explanation for the observed prevalence of fast bars in nature.

  18. Calculation of error bars for laser damage observations

    Science.gov (United States)

    Arenberg, Jonathan W.

    2008-10-01

    The use of the error bar is a critical means of communicating the quality of individual data points and a processed result. Understanding the error bar for a processed measurement depends on the measurement technique being used and is the subject of many recent works, as such, the paper will confine its scope to the determination of the error bar on a single data point. Many investigators either ignore the error bar altogether or use a "one size error fits all" method, both of these approaches are poor procedure and misleading. It is the goal of this work to lift the veil of mysticism surrounding error bars for damage observations and make their description, calculation and use, easy and commonplace. This paper will rigorously derive the error bar size as a function of the experimental parameters and observed data and will concentrate on the dependent variable, the cumulative probability of damage. The paper will begin with a discussion of the error bar as a measure of data quality or reliability. The expression for the variance in the parameters is derived via standard methods and converted to a standard deviation. The concept of the coverage factor is introduced to scale the error bar to the desired confidence level, completing the derivation

  19. The bar instability revisited

    CERN Document Server

    Chiodi, Filippo; Claudin, Philippe

    2012-01-01

    The river bar instability is revisited, using a hydrodynamical model based on Reynolds averaged Navier-Stokes equations. The results are contrasted with the standard analysis based on shallow water Saint-Venant equations. We first show that the stability of both transverse modes (ripples) and of small wavelength inclined modes (bars) predicted by the Saint-Venant approach are artefacts of this hydrodynamical approximation. When using a more reliable hydrodynamical model, the dispersion relation does not present any maximum of the growth rate when the sediment transport is assumed to be locally saturated. The analysis therefore reveals the fundamental importance of the relaxation of sediment transport towards equilibrium as it it is responsible for the stabilisation of small wavelength modes. This dynamical mechanism is characterised by the saturation number, defined as the ratio of the saturation length to the water depth Lsat/H. This dimensionless number controls the transition from ripples (transverse patte...

  20. Space and power efficient hybrid counters array

    Science.gov (United States)

    Gara, Alan G.; Salapura, Valentina

    2009-05-12

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  1. Breaking through the Bar

    Science.gov (United States)

    Gray, Katti

    2011-01-01

    Howard University School of Law had a problem, and school officials knew it. Over a 20-year period, 40 percent of its graduates who took the Maryland bar exam failed it on their first try. During the next 24 months--the time frame required to determine its "eventual pass rate"--almost 90 percent of the students did pass. What they did not know was…

  2. Strained graphene Hall bar

    Science.gov (United States)

    Milovanović, S. P.; Peeters, F. M.

    2017-02-01

    The effects of strain, induced by a Gaussian bump, on the magnetic field dependent transport properties of a graphene Hall bar are investigated. The numerical simulations are performed using both classical and quantum mechanical transport theory and we found that both approaches exhibit similar characteristic features. The effects of the Gaussian bump are manifested by a decrease of the bend resistance, R B, around zero-magnetic field and the occurrence of side-peaks in R B. These features are explained as a consequence of bump-assisted scattering of electrons towards different terminals of the Hall bar. Using these features we are able to give an estimate of the size of the bump. Additional oscillations in R B are found in the quantum description that are due to the population/depopulation of Landau levels. The bump has a minor influence on the Hall resistance even for very high values of the pseudo-magnetic field. When the bump is placed outside the center of the Hall bar valley polarized electrons can be collected in the leads.

  3. 从管理角度谈大学生负面情绪的应对%Counter Measures in Negative Emotion of College Students from Management Point of View

    Institute of Scientific and Technical Information of China (English)

    李姗姗; 张硕

    2013-01-01

    Some negative emotions such as anxiety , frustrated and depressed were produced in the daily study and life of college students, which affected by academic pressure, family environment, interpersonal relationship.The physical and mental health of college students were effected by the accumulation of negative emotions.Some counter measures in negative emotion of college students were discussed from 2 aspects of improving the quality of students and providing help for students by colleges.%  大学生在日常的学习和生活中会受到学业压力、家庭环境、人际关系的影响,产生焦虑、沮丧、郁闷等一些不积极的情绪。这些负面情绪的积累会影响大学生的生理和心理健康。从提高大学生自身素质、高校为大学生提供外界帮助2个方面,论述了应对大学生负面情绪的一些措施。

  4. Counter-Learning under Oppression

    Science.gov (United States)

    Kucukaydin, Ilhan

    2010-01-01

    This qualitative study utilized the method of narrative analysis to explore the counter-learning process of an oppressed Kurdish woman from Turkey. Critical constructivism was utilized to analyze counter-learning; Frankfurt School-based Marcusian critical theory was used to analyze the sociopolitical context and its impact on the oppressed. Key…

  5. Barred Galaxies: an Observer's Perspective

    CERN Document Server

    Gadotti, Dimitri A

    2008-01-01

    I review both well established and more recent findings on the properties of bars, and their host galaxies, stemming from photometric and spectroscopic observations, and discuss how these findings can be understood in terms of a global picture of the formation and evolution of bars, keeping a connection with theoretical developments. In particular, I show the results of a detailed structural analysis of ~ 300 barred galaxies in the Sloan Digital Sky Survey, providing physical quantities, such as bar length, ellipticity and boxyness, and bar-to-total luminosity ratio, that can either be used as a solid basis on which realistic models can be built, or be compared against more fundamental theoretical results. I also show correlations that indicate that bars grow longer, thinner and stronger with dynamical age, and that the growth of bars and bulges is connected. Finally, I briefly discuss open questions and possible directions for future research.

  6. Impact of Partial and Comprehensive Smoke-Free Regulations on Indoor Air Quality in Bars.

    Science.gov (United States)

    Kim, Jeonghoon; Ban, Hyunkyung; Hwang, Yunhyung; Ha, Kwonchul; Lee, Kiyoung

    2016-07-26

    In Korea, smoke-free regulations have been gradually implemented in bars based on venue size. Smoking bans were implemented in 2013 for bars ≥150 m², in 2014 for bars ≥100 m², and in 2015 for bars of all sizes. The purpose of this study was to determine indoor fine particle (PM2.5) concentrations in bars before and after implementation of the smoke-free policies based on venue size. Indoor PM2.5 concentrations were measured with real-time aerosol monitors at four time points: (1) pre-regulation (n = 75); (2) after implementing the ban in bars ≥150 m² (n = 75); (3) after implementing the ban in bars ≥100 m² (n = 107); and (4) when all bars were smoke-free (n = 79). Our results showed that the geometric mean of the indoor PM2.5 concentrations of all bars decreased from 98.4 μg/m³ pre-regulation to 79.5, 42.9, and 26.6 μg/m³ after the ban on smoking in bars ≥150 m², ≥100 m², and all bars, respectively. Indoor PM2.5 concentrations in bars of each size decreased only after the corresponding regulations were implemented. Although smoking was not observed in Seoul bars after smoking was banned in all bars, smoking was observed in 4 of 21 bars in Changwon. Our study concludes that the greatest decrease in PM2.5 concentrations in bars was observed after the regulation covering all bars was implemented. However, despite the comprehensive ban, smoking was observed in bars in Changwon. Strict compliance with the regulations is needed to improve indoor air quality further.

  7. Improved determination of the position and activity of a radioactive point source inside a bulky medium using several detectors. The special case of a lung counter-A general view

    Energy Technology Data Exchange (ETDEWEB)

    Pelled, Omer [NRC-Negev, P.O.Box 9001, Beer-Sheva 84190 (Israel); Bonardi, Mauro L. [Universita degli Studi and INFN-Milano, LASA, Radiochemistry Laboratory Via F.lli Cervi 201, 20090 Segrate, Milan (Italy); German, Uzi [NRC-Negev, P.O.Box 9001, Beer-Sheva 84190 (Israel); Groppi, Flavia [Universita degli Studi and INFN-Milano, LASA, Radiochemistry Laboratory Via F.lli Cervi 201, 20090 Segrate, Milan (Italy); Alfassi, Zeev B. [Department of Nuclear Engineering, Ben Gurion University, Beer Sheva 84105 (Israel)]. E-mail: alfassi@bgumail.bgu.ac.il

    2007-02-15

    A method is described to locate a radioactive point source in a lung using a commercial array of lung detectors. The method takes advantage of the fact that modern commercial systems consist of several Ge detectors, each connected to a multi-channel analyzer, and the information from each detector can be analyzed separately. The system is calibrated with point sources placed in various locations in the lungs of a phantom. A vector method is presented for determining which of the calibration locations in the phantom is closest to the location of the unknown point source. It has been shown that the accuracy of the method increases with increasing number of the vector dimensions. A higher dimensionality can be achieved by analyzing counts of several gamma lines or by using more detectors.

  8. Counter-driver shock tube

    Science.gov (United States)

    Tamba, T.; Nguyen, T. M.; Takeya, K.; Harasaki, T.; Iwakawa, A.; Sasoh, A.

    2015-11-01

    A "counter-driver" shock tube was developed. In this device, two counter drivers are actuated with an appropriate delay time to generate the interaction between a shock wave and a flow in the opposite direction which is induced by another shock wave. The conditions for the counter drivers can be set independently. Each driver is activated by a separate electrically controlled diaphragm rupture device, in which a pneumatic piston drives a rupture needle with a temporal jitter of better than 1.1 ms. Operation demonstrations were conducted to evaluate the practical performance.

  9. Bar piezoelectric ceramic transformers.

    Science.gov (United States)

    Erhart, Jiří; Pulpan, Půlpán; Rusin, Luboš

    2013-07-01

    Bar-shaped piezoelectric ceramic transformers (PTs) working in the longitudinal vibration mode (k31 mode) were studied. Two types of the transformer were designed--one with the electrode divided into two segments of different length, and one with the electrodes divided into three symmetrical segments. Parameters of studied transformers such as efficiency, transformation ratio, and input and output impedances were measured. An analytical model was developed for PT parameter calculation for both two- and three-segment PTs. Neither type of bar PT exhibited very high efficiency (maximum 72% for three-segment PT design) at a relatively high transformation ratio (it is 4 for two-segment PT and 2 for three-segment PT at the fundamental resonance mode). The optimum resistive loads were 20 and 10 kΩ for two- and three-segment PT designs for the fundamental resonance, respectively, and about one order of magnitude smaller for the higher overtone (i.e., 2 kΩ and 500 Ω, respectively). The no-load transformation ratio was less than 27 (maximum for two-segment electrode PT design). The optimum input electrode aspect ratios (0.48 for three-segment PT and 0.63 for two-segment PT) were calculated numerically under no-load conditions.

  10. The decays \\bar{B}->\\bar{K}D and \\bar{B}-> \\bar{K}\\bar{D} and final state interactions

    CERN Document Server

    Fayyazuddin, A

    2001-01-01

    The decays \\bar{B}-> \\bar{K}D and \\bar{B}-> \\bar{K}\\bar{D} taking into account final state interactions are discussed. These decays are described by four strong phases \\delta_0,\\delta_1,\\bar{\\delta}_0,\\bar{\\delta}_1 (subscripts 0 and 1 refers to I=0 and I=1 final states), one weak phase \\gamma and four real amplitudes. It is argued that strong interaction dynamics implies \\bar{\\delta}_1=0,\\delta_0=-\\delta_1. Rescattering has significant effects on weak amplitudes. Taking into account, rescattering, we find that direct CP--violating asymmetry in these decays may lie in the range \\mp 0.023\\sin \\gamma \\leq \\QTR{cal}{A}_{1,2}\\leq \\mp 0.086\\sin \\gamma.

  11. Over-the-Counter Medicines

    Science.gov (United States)

    Over-the-counter (OTC) medicines are drugs you can buy without a prescription. Some OTC medicines relieve aches, pains ... Others help manage recurring problems, like migraines. In the United States, the Food and Drug Administration decides ...

  12. Star Formation Activity of Barred Spiral Galaxies

    Science.gov (United States)

    Kim, Eunbin; Hwang, Ho Seong; Chung, Haeun; Lee, Gwang-Ho; Park, Changbom; Cervantes Sodi, Bernardo; Kim, Sungsoo S.

    2017-08-01

    We study the star formation activity of nearby galaxies with bars using a sample of late-type galaxies at 0.02≤slant z≤slant 0.05489 and {M}rmass and redshift distributions similar to barred galaxies. We find that the star formation activity of strongly barred galaxies probed by starburstiness, g-r, {NUV}-r, and mid-infrared [3.4]-[12] colors is, on average, lower than that of non-barred galaxies. However, weakly barred galaxies do not show such a difference between barred and non-barred galaxies. The amounts of atomic and molecular gas in strongly barred galaxies are smaller than those in non-barred galaxies, and the gas metallicity is higher in strongly barred galaxies than in non-barred galaxies. The gas properties of weakly barred galaxies again show no difference from those of non-barred galaxies. We stack the optical spectra of barred and non-barred galaxies in several mass bins and fit to the stacked spectra with a spectral fitting code, STARLIGHT. We find no significant difference in stellar populations between barred and non-barred galaxies for both strongly and weakly barred galaxies. Our results are consistent with the idea that the star formation activity of barred galaxies was enhanced in the past along with significant gas consumption, and is currently lower than or similar to that of non-barred galaxies. The past star formation enhancement depends on the strength of bars.

  13. Optical properties of the PANDA barrel DIRC radiator bars

    Energy Technology Data Exchange (ETDEWEB)

    Kalicy, Grzegorz; Krebs, Marvin; Peters, Klaus [GSI, Darmstadt (Germany); Goethe Universitaet, Frankfurt (Germany); Schwarz, Carsten; Schwiening, Jochen [GSI, Darmstadt (Germany); Collaboration: PANDA-Collaboration

    2015-07-01

    The PANDA experiment at the Facility for Antiproton and Ion Research in Europe (FAIR) at GSI, Darmstadt, will study fundamental questions of hadron physics and QCD. A fast focusing DIRC (Detection of Internally Reflected Cherenkov light) counter will provide hadronic particle identification (PID) in the barrel region of the PANDA detector. To meet the PID requirements, the Barrel DIRC has to provide precise measurements of the Cherenkov angle, which is conserved for Cherenkov photons propagating through the radiator by total internal reflection. The radiators, rectangular bars made from fused silica, have to fulfill very strict optical and mechanical requirements. This includes the squareness and parallelism of the sides of the bars, sharp corners, and a very smooth surface polish, ensuring that the Cherenkov photons reach the optical sensors without angular distortions. Currently the Barrel DIRC is at the final design stage and several different bar shapes and fabrication methods are being considered for the final detector. An optical setup, consisting of a computer-controlled positioning and a multi-wavelength laser system, is used to evaluate the radiator bars to obtain critical values like transmittance and reflectivity. The current results and techniques are presented on this poster.

  14. Bars in Cuspy Dark Halos

    CERN Document Server

    Dubinski, John; Shlosman, Isaac

    2008-01-01

    We examine the bar instability in models with an exponential disk and a cuspy NFW-like dark matter (DM) halo inspired by cosmological simulations. Bar evolution is studied as a function of numerical resolution in a sequence of models spanning 10K to 100M DM particles - including a multi-mass model with an effective resolution of 10G. The goal is to find convergence in dynamical behaviour. We characterize the bar growth, the buckling instability, pattern speed decay through resonant transfer of angular momentum, and possible destruction of the DM halo cusp. Overall, most characteristics converge in behaviour in detail for halos containing more than 10M particles. Notably, the formation of the bar does not destroy the density cusp in this case. These higher resolution simulations clearly illustrate the importance of discrete resonances in transporting angular momentum from the bar to the halo.

  15. The consequences of Israel's counter terrorism policy

    OpenAIRE

    Jansen, Pia Therese

    2008-01-01

    The main focus of this thesis is to examine Israel's counter terrorism methods and their consequences and to debate the effectiveness of Israel's counter terrorism policy. By stimulating a debate on these issues it is possible to identify a more effective counter terrorism policy. In order to examine Israel's counter terrorism methods, their consequences and effectiveness, it is necessary to first explore the overall concepts of terrorism and counter terrorism. Then, because...

  16. Galaxy Zoo: CANDELS Barred Disks and Bar Fractions

    CERN Document Server

    Simmons, B D; Lintott, Chris; Masters, Karen L; Willett, Kyle W; Keel, William C; Smethurst, R J; Cheung, Edmond; Nichol, Robert C; Schawinski, Kevin; Rutkowski, Michael; Kartaltepe, Jeyhan S; Bell, Eric F; Casteels, Kevin R V; Conselice, Christopher J; Almaini, Omar; Ferguson, Henry C; Fortson, Lucy; Hartley, William; Kocevski, Dale; Koekemoer, Anton M; McIntosh, Daniel H; Mortlock, Alice; Newman, Jeffrey A; Ownsworth, Jamie; Bamford, Steven; Dahlen, Tomas; Faber, Sandra M; Finkelstein, Steven L; Fontana, Adriano; Galametz, Audrey; Grogin, N A; Grutzbauch, Ruth; Guo, Yicheng; Haussler, Boris; Jek, Kian J; Kaviraj, Sugata; Lucas, Ray A; Peth, Michael; Salvato, Mara; Wiklind, Tommy; Wuyts, Stijn

    2014-01-01

    The formation of bars in disk galaxies is a tracer of the dynamical maturity of the population. Previous studies have found that the incidence of bars in disks decreases from the local Universe to z ~ 1, and by z > 1 simulations predict that bar features in dynamically mature disks should be extremely rare. Here we report the discovery of strong barred structures in massive disk galaxies at z ~ 1.5 in deep rest-frame optical images from CANDELS. From within a sample of 876 disk galaxies identified by visual classification in Galaxy Zoo, we identify 123 barred galaxies. Selecting a sub-sample within the same region of the evolving galaxy luminosity function (brighter than L*), we find that the bar fraction across the redshift range 0.5< z < 2 (f_bar = 10.7 +6.3 -3.5% after correcting for incompleteness) does not significantly evolve. We discuss the implications of this discovery in the context of existing simulations and our current understanding of the way disk galaxies have evolved over the last 11 bil...

  17. Cam-controlled boring bar

    Science.gov (United States)

    Glatthorn, Raymond H.

    1986-01-01

    A cam-controlled boring bar system (100) includes a first housing (152) which is rotatable about its longitudinal axis (154), and a second housing in the form of a cam-controlled slide (158) which is also rotatable about the axis (154) as well as being translatable therealong. A tool-holder (180) is mounted within the slide (158) for holding a single point cutting tool. Slide (158) has a rectangular configuration and is disposed within a rectangularly configured portion of the first housing (152). Arcuate cam slots (192) are defined within a side plate (172) of the housing (152), while cam followers (194) are mounted upon the cam slide (158) for cooperative engagement with the cam slots (192). In this manner, as the housing (152) and slide (158) rotate, and as the slide (158) also translates, a through-bore (14) having an hourglass configuration will be formed within a workpiece (16) which may be, for example, a nuclear reactor steam generator tube support plate.

  18. Bar Coliseo, en Sevilla

    Directory of Open Access Journals (Sweden)

    de la Peña Neila, Antonio

    1963-10-01

    Full Text Available This bar is situated inside the «Coliseo» building, which houses a cinema, as well as a number of commercial establishments. In order not to break the unity of the total project, no attempt has been made to alter the exterior aspect of the bar. No attempt was made, either, to make it into an intimate, club type of bar, now so much in fashion. Rather has it been given a diaphanous style, seeking the best possible use of the floor space. The windows of the building are elongated, and there is an intermediate floor level, whose detailed structure is metallic. A cleverly designed staircase, of folded sheet metal connects the ground floor, the intermediate floor level and the restaurant. Materials were carefully chosen in accordance with their function. The colour scheme has a sustained unity throughout the building, and care has been taken to avoid surprising or vivid chromatic patterns. Ceramic enamels by the painter Santiago del Campo provide a feature of decoration on the ground floor, and also serve to cover up the return air ducts. On the top floor, the restaurant is fitted with coloured tile facings, the work of the Seville painters Maria Josefa Sánchez, María Dolores Sánchez and Emilio García Ortiz. The bottom joints of the timber beams, in conjunction with the tile patterns, is reminiscent of the traditional Sevillian habit of placing ceramic units between the timber framework of buildings. The initial problem of the architect was to combine the optimum functional efficiency and aesthetic quality of the project, and the final solution is undoubtedly successful.El establecimiento está situado dentro del edificio «Coliseo», complejo formado por una sala de cine, y con la parte lateral destinada a locales comerciales. Formando un conjunto único no se pensó nunca en transformar los revestimientos y molduras de fachada. Tampoco presidió la idea de conseguir un establecimiento íntimo «tipo Club», tan en boga actualmente, sino un

  19. Repairing and strengthening a fractured Hader bar.

    Science.gov (United States)

    Herrero, D B

    1997-01-01

    Stresses from occlusion and metal fatigue over time can cause fracture of overdenture retention bars. Often failure of the bar necessitates the removal and remake of the bar. This may damage the abutment, especially if there are dowel posts involved. This article describes a method for reinforcing the existing bar without having to remove the bar or significantly alter the overdenture. The fractured bar can be prepared in the mouth to receive a reinforcing superstructure that will be cemented.

  20. Turbulent mixing condensation nucleus counter

    Science.gov (United States)

    Mavliev, Rashid

    The construction and operating principles of the Turbulent Mixing Condensation Nucleus Counter (TM CNC) are described. Estimations based on the semiempirical theory of turbulent jets and the classical theory of nucleation and growth show the possibility of detecting particles as small as 2.5 nm without the interference of homogeneous nucleation. This conclusion was confirmed experimentally during the International Workshop on Intercomparison of Condensation Nuclei and Aerosol Particle Counters (Vienna, Austria). Number concentration, measured by the Turbulent Mixing CNC and other participating instruments, is found to be essentially equal.

  1. Countering 21st Century Threats

    DEFF Research Database (Denmark)

    Scharling Pedersen, Peter; Pillai, Chad M.; Hun, Lee Jae

    2015-01-01

    ), Counter-Terrorism (CT), and Security and Stability Operations (SSO). • Establishing a construct that allows a strategic Whole-of-Government capacity for operations coordinated by joint interagency task forces. • Continue to developing the Global SOF network. • Increased intelligence sharing in areas...... to be addressed in order to successfully conduct IW. As result of researching the issues associated with developing a JIIM approach to IW, the paper makes the following recommendations: • Establishing universally accepted concepts and doctrines for IW, UW, Foreign Internal Defense (FID), Counter Insurgency (COIN...

  2. Experimental determinations of the eigenmodes for composite bars made with carbon and Kevlar-carbon fibers

    Science.gov (United States)

    Miriţoiu, C. M.; Stănescu, M. M.; Burada, C. O.; Bolcu, D.; Roşca, V.

    2015-11-01

    For modal identification, the single-point excitation method has been widely used in modal tests and it consists in applying a force in a given point and recording the vibratory structure response in all interest points, including the excitation point. There will be presented the experimental recordings for the studied bars (with Kevlar-carbon or carbon fibers), the frequency response function in Cartesian and polar coordinates. By using the frequency response functions we determine the eigenparameters for each bar. We present the final panel of the eigenmodes (with the damping factors, eigenfrequencies and critical damping) for each considered bar. Using the eigenfrequency of the first determined eigenmode, the bars stiffness has been determined. The presented bars can be used in practical engineering for: car or bus body parts, planes body parts, bullet-proof vests, reinforcements for sandwich beams, and so on.

  3. Nanoporosity of Si (100) bars

    Science.gov (United States)

    Novikov, S. N.; Timoshenkov, S. P.; Minaev, V. S.; Goryunova, E. P.; Gerasimenko, N. N.; Smirnov, D. I.

    2016-09-01

    Si(100) samples cut from a typical bar (100 mm in diameter) prepared using industrial technology are studied. Measurements of the electron work function (EWF) show that the size effects in these samples (a reduction in thickness along with a sample's area and the EWF) detected earlier were due to nanostructure porosity that was buried by the technological treatment of a bar's surface. This hidden nanoporosity is assumed to be a manifestation of the secondary crystal structure.

  4. Triply heavy tetraquark states with the $QQ\\bar{Q}\\bar{q}$ configuration

    CERN Document Server

    Chen, Kan; Wu, Jing; Liu, Yan-Rui; Zhu, Shi-Lin

    2016-01-01

    In the framework of the color-magnetic interaction, we systematically investigate the mass splittings of the $QQ\\bar{Q}\\bar{q}$ tetraquark states and estimated their rough masses in this work. These systems include the explicitly exotic states $cc\\bar{b}\\bar{q}$ and $bb\\bar{c}\\bar{q}$ and the hidden exotic states $cc\\bar{c}\\bar{q}$, $cb\\bar{b}\\bar{q}$, $bc\\bar{c}\\bar{q}$, and $bb\\bar{b}\\bar{q}$. If a state around the estimated mass region could be observed, its nature as a genuine tetraquark is favored. The strong decay patterns shown here will be helpful to the experimental search for these exotic states.

  5. Counter-Rotating Accretion Discs

    CERN Document Server

    Dyda, Sergei; Ustyugova, Galina V; Romanova, Marina M; Koldoba, Alexander V

    2014-01-01

    Counter-rotating discs can arise from the accretion of a counter-rotating gas cloud onto the surface of an existing co-rotating disc or from the counter-rotating gas moving radially inward to the outer edge of an existing disc. At the interface, the two components mix to produce gas or plasma with zero net angular momentum which tends to free-fall towards the disc center. We discuss high-resolution axisymmetric hydrodynamic simulations of a viscous counter-rotating disc for cases where the two components are vertically separated and radially separated. The viscosity is described by an isotropic $\\alpha-$viscosity including all terms in the viscous stress tensor. For the vertically separated components a shear layer forms between them. The middle of this layer free-falls to the disk center. The accretion rates are increased by factors $\\sim 10^2-10^4$ over that of a conventional disc rotating in one direction with the same viscosity. The vertical width of the shear layer and the accretion rate are strongly dep...

  6. The Eros of Counter Education

    Science.gov (United States)

    Luzon, Pinhas

    2016-01-01

    Erotic Counter Education (ECE) is the educational position of the late Ilan Gur-Ze'ev. In ECE Gur-Ze'ev combines two opposing positions in the philosophy of education, one teleological and anti-utopian, the other teleological and utopian. In light of this unique combination, I ask what mediates between these two poles and suggest that the answer…

  7. Automatic detection of service initiation signals used in bars

    Directory of Open Access Journals (Sweden)

    Sebastian eLoth

    2013-08-01

    Full Text Available Recognising the intention of others is important in all social interactions, especially in the service domain. Enabling a bartending robot to serve customers is particularly challenging as the system has to recognise the social signals produced by customers and respond appropriately. Detecting whether a customer would like to order is essential for the service encounter to succeed. This detection is particularly challenging in a noisy environment with multiple customers. Thus, a bartending robot has to be able to distinguish between customers intending to order, chatting with friends or just passing by. In order to study which signals customers use to initiate a service interaction in a bar, we recorded real-life customer-staff interactions in several German bars. These recordings were used to generate initial hypotheses about the signals customers produce when bidding for the attention of bar staff. Two experiments using snapshots and short video sequences then tested the validity of these hypothesised candidate signals. The results revealed that bar staff responded to a set of two non-verbal signals: first, customers position themselves directly at the bar counter and, secondly, they look at a member of staff. Both signals were necessary and, when occurring together, sufficient. The participants also showed a strong agreement about when these cues occurred in the videos. Finally, a signal detection analysis revealed that ignoring a potential order is deemed worse than erroneously inviting customers to order. We conclude that a these two easily recognisable actions are sufficient for recognising the intention of customers to initiate a service interaction, but other actions such as gestures and speech were not necessary, and b the use of reaction time experiments using natural materials is feasible and provides ecologically valid results.

  8. Measuring Cherenkov Backgrounds from Proportional Counters in SNO

    Science.gov (United States)

    Seibert, Stanley

    2006-04-01

    In the current phase of operation of the Sudbury Neutrino Observatory, He-3 proportional counters have been deployed in the center of the detector to measure neutron production from neutral-current interactions between neutrinos and deuterons in the heavy water. Radioactive decays of Bi-214 and Tl-208 in the counters produce gammas of sufficient energy to photodisintegrate deuterons, which become a background to the neutral current measurement. We have measured the background rate in-situ using Cherenkov light detected with SNO's 9456 inward-looking photomultiplier tubes. A maximum likelihood method is used to separate backgrounds in the heavy water from backgrounds in the proportional counters based upon the spatial distribution of low energy Cherenkov event vertices. Uncertainties on the backgrounds have been estimated using calibration data taken with both a distributed Na-24 source, and a contained Th source deployed at various points in the detector.

  9. Bar Dissolution in Prolate Halos

    CERN Document Server

    Ideta, M; Ideta, Makoto; Hozumi, Shunsuke

    2000-01-01

    The time evolution of barred structures is examined under the influence of the external forces exerted by a spherical halo and by prolate halos. In particular, galaxy disks are placed in the plane including the major axis of prolate halos, whose configuration is often found in cosmological simulations. N-body disks in fixed external halo fields are simulated, so that bars are formed via dynamical instability. In the subsequent evolution, the bars in prolate halos dissolve gradually with time, while the bar pattern in a spherical halo remains almost unchanged to the end of the simulation. The decay times of the bars suggest that they can be destroyed in a time smaller than a Hubble time. Our results indicate that this dissolution process could occur in real barred galaxies, if they are surrounded by massive dark prolate halos, and the configuration adopted here is not unusual from the viewpoint of galaxy formation. For a prolate halo model, an additional simulation that is restricted to two-dimensional in-plan...

  10. Basic Research Needs for Countering Terrorism

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, W.; Michalske, T.; Trewhella, J.; Makowski, L.; Swanson, B.; Colson, S.; Hazen, T.; Roberto, F.; Franz, D.; Resnick, G.; Jacobson, S.; Valdez, J.; Gourley, P.; Tadros, M.; Sigman, M.; Sailor, M.; Ramsey, M.; Smith, B.; Shea, K.; Hrbek, J.; Rodacy, P.; Tevault, D.; Edelstein, N.; Beitz, J.; Burns, C.; Choppin, G.; Clark, S.; Dietz, M.; Rogers, R.; Traina, S.; Baldwin, D.; Thurnauer, M.; Hall, G.; Newman, L.; Miller, D.; Kung, H.; Parkin, D.; Shuh, D.; Shaw, H.; Terminello, L.; Meisel, D.; Blake, D.; Buchanan, M.; Roberto, J.; Colson, S.; Carling, R.; Samara, G.; Sasaki, D.; Pianetta, P.; Faison, B.; Thomassen, D.; Fryberger, T.; Kiernan, G.; Kreisler, M.; Morgan, L.; Hicks, J.; Dehmer, J.; Kerr, L.; Smith, B.; Mays, J.; Clark, S.

    2002-03-01

    To identify connections between technology needs for countering terrorism and underlying science issues and to recommend investment strategies to increase the impact of basic research on efforts to counter terrorism.

  11. Field observations of nearshore bar formation

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian;

    2008-01-01

      The formation of an inner nearshore bar was observed during a high-energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics...

  12. Counter-discourse in Zimbabwean literature

    NARCIS (Netherlands)

    Mangena, Tendai

    2015-01-01

    Counter-Discourse in Zimbabwean Literature is a study of specific aspects of counter-discursive Zimbabwean narratives in English. In discussing the selected texts, my thesis is based on Terdiman’s (1989) the postcolonial concept of counter-discourse. In Zimbabwean literature challenges to a dominant

  13. Lossy Counter Machines Decidability Cheat Sheet

    Science.gov (United States)

    Schnoebelen, Philippe

    Lossy counter machines (LCM's) are a variant of Minsky counter machines based on weak (or unreliable) counters in the sense that they can decrease nondeterministically and without notification. This model, introduced by R. Mayr [TCS 297:337-354 (2003)], is not yet very well known, even though it has already proven useful for establishing hardness results.

  14. Science Experimenter: Experimenting with a Geiger Counter.

    Science.gov (United States)

    Mims, Forrest M., III

    1992-01-01

    Describes the use of geiger counters for scientific investigations and experiments. Presents information about background radiation, its sources and detection. Describes how geiger counters work and other methods of radiation detection. Provides purchasing information for geiger counters, related computer software and equipment. (MCO)

  15. Counter-discourse in Zimbabwean literature

    NARCIS (Netherlands)

    Mangena, Tendai

    2015-01-01

    Counter-Discourse in Zimbabwean Literature is a study of specific aspects of counter-discursive Zimbabwean narratives in English. In discussing the selected texts, my thesis is based on Terdiman’s (1989) the postcolonial concept of counter-discourse. In Zimbabwean literature challenges to a dominant

  16. Counter-Rotation in Disk Galaxies

    CERN Document Server

    Corsini, E M

    2014-01-01

    Counter-rotating galaxies host two components rotating in opposite directions with respect to each other. The kinematic and morphological properties of lenticulars and spirals hosting counter-rotating components are reviewed. Statistics of the counter-rotating galaxies and analysis of their stellar populations provide constraints on the formation scenarios which include both environmental and internal processes.

  17. Counter Examples as Starting Points for Reasoning and Sense Making

    Science.gov (United States)

    Yopp, David A.

    2013-01-01

    This article describes a classroom activity with college sophomores in a methods-of-proof course in which students reasoned about absolute value inequalities. The course was designed to meet the needs of both mathematics majors and secondary school mathematics teaching majors early in their college studies. Asked to "fix" a false…

  18. Effect of bars on the galaxy properties

    Science.gov (United States)

    Vera, Matias; Alonso, Sol; Coldwell, Georgina

    2016-10-01

    Aims: With the aim of assessing the effects of bars on disk galaxy properties, we present an analysis of different characteristics of spiral galaxies with strong bars, weak bars and without bars. Methods: We identified barred galaxies from the Sloan Digital Sky Survey (SDSS). By visual inspection of SDSS images we classified the face-on spiral galaxies brighter than glog (M∗/M⊙) processing, reflected in the significant changes in the physical properties of the host galaxies.

  19. 40 CFR 417.70 - Applicability; description of the manufacture of bar soaps subcategory.

    Science.gov (United States)

    2010-07-01

    ... manufacture of bar soaps subcategory. 417.70 Section 417.70 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.70 Applicability; description of the manufacture of...

  20. Counter support for WA35

    CERN Multimedia

    1977-01-01

    This assembly was equipped with 78 counters, each consisting of a lucite cone, to produce Cerenkov light, and a CsI scintillator plate of 3 mm thickness glued on the face of the cone. The experiment WA35 was set-up in the s1 beam (West Hall) by the Darmstadt-Heidelberg-Virginia-Warsaw Collaboration to measure angular distributions and multiplicities of pions and recoil protons produced by hadrons interacting in nuclei. (See Annual Report 1976 p. 39)

  1. Science role in countering terrorism

    Science.gov (United States)

    Showstack, Randy

    Geoscience expertise figures as a component of a new report on harnessing the U.S. science and technology community in the fight against terrorism.The National Research Council report, "Making the Nation Safer: The Role of Science and Technology in Countering Terrorism," proposes research agendas in a number of areas perceived to be vulnerable to terrorism. These areas include nuclear and radiological threats, toxic chemicals and explosive materials, information technology, energy systems, and cities and fixed infrastructure.

  2. Measurements of partial widths and forward-backward asymmetries in Z sup 0 decays into ss-bar, cc-bar and bb-bar-preliminary results

    CERN Document Server

    Axelsson, M G

    1999-01-01

    Measurements are reported of partial widths and forward-backward asymmetries in flavour-identified quark final states based on the full LEP1 statistics, corresponding to 3x10 sup 6 hadronic Z sup 0 decays collected by the DELPHI experiment from 1992 to 1995. Particle identification provided by the Ring Imaging Cherenkov counters and the Time Projection Chamber is used to obtain clear D sup 0 , D sup + , D sub s sup + and LAMBDA sub c sup + signatures. A measurement of the charm multiplicity in bb-bar events is also presented. Identification of high-energy charged kaons is used to tag the s quark. Two methods for determination of the forward-backward asymmetry of the s quark are presented.

  3. Measurement of B0bar -> D(*)0 K(*)0bar Branching Fractions

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Pappagallo, M; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Best, D S; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Teodorescu, L; Blinov, V E; Bukin, A D; Buzykaev, A R; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, Yu K; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Del Re, D; Hadavand, H K; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Nogowski, R; Petzold, A; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Grenier, P; Latour, E; Thiebaux, C; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Gaillard, J R; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Chai, X; Charles, M J; Mader, W F; Mallik, U; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Petersen, T C; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Brown, C L; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Kelly, M P; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Willocq, S Y; Cowan, R; Koeneke, K; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Potter, C T; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Chauveau, J; David, P; Del Buono, L; La Vaissière, C de; Hamon, O; Hartfiel, B L; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Panetta, J; Biasini, M; Covarelli, R; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Di, E; Marco; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Mayer, B; Vasseur, G; Yéche, C; Zito, M; Park, W; Purohit, M V; Weidemann, A W; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Boyarski, A M; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Azzolini, V; Martínez-Vidal, F; Panvini, R S; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Flood, K T; Graham, M T; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mellado, B; Mihályi, A; Mohapatra, A K; Pan, Y; Pierini, M; Prepost, R; Tan, P; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We present a study of the decays B0bar --> D(*)0 K(*)0bar using a sample of 226 million Y(4S) --> B Bbar decays collected with the BaBar detector at the PEP-II asymmetric-energy e+e-collider at SLAC. We report evidence for the decay of B0 and B0bar mesons to the D*0 K0s final state with an average branching fraction BF(B0-tilde --> D*0 K0bar) := [ BF(B0bar --> D*0 K0bar) + BF(B0 --> D*0 K0) ]/2 = (3.6 +- 1.2 +- 0.3) x 10^-5. Similarly, we measure BF(B0-tilde --> D0 K0bar) := [ BF(B0bar --> D0 K0bar) + BF(B0 --> D0 K0) ]/2 = (5.3 +- 0.7 +- 0.3) x 10^-5 forthe D0 K0s final state. We measure BF(B0bar --> D0 K*0bar) =^(4.0 +- 0.7 +- 0.3) x 10^-5 and set a 90% confidence level upper limit BF(B0bar --> D0bar K*0bar) D0bar K*0bar)/A(B0bar --> D0 K*0bar)| to be less than 0.4 at the 90% confidence level.

  4. Jackson Bar Training Structure Study

    Science.gov (United States)

    2015-05-01

    Jackson, AL. Jackson Bar, a sand bar, is located on the left descending bank upstream of a railroad bridge. Located in a bend in the BWT at Jackson, AL...foot-pounds force 1.355818 joules gallons (U.S. liquid ) 3.785412 E-03 cubic meters inches 0.0254 meters miles (nautical) 1,852 meters miles (U.S...left descending bank southwest of Jackson, AL, and upstream of the Norfolk Southern railroad bridge (Figure 1). The railroad bridge is located in the

  5. Signaling behind bars: a role for bar domains

    NARCIS (Netherlands)

    de Kreuk, B.J.

    2012-01-01

    In this thesis we describe several novel components of growth factor receptor and RhoGTPase activation and signaling. We have demonstrated that the F-BAR protein PACSIN2 is an important regulator of Rac1 output and, as a consequence, cell spreading and migration. This study further established the i

  6. Results on conventional and exotic charmonium at BaBar

    CERN Document Server

    Bernard, Denis

    2013-01-01

    The B factories provide a unique playground for studying the properties of conventional and exotic charmonium states. We present recent results in initial state radiation and two-photon fusion, obtained using the full data set collected by the BaBar experiment. Amongst BaBar 's harvest presented in this talk, the determination of the quantum numbers of the X(3915) resonance, a body of concording evidence pointing to JPC = 1++ for the X(3872), and updates on the family of the Y resonance to the full integrated luminosity.

  7. [p,q] does not equal (i h-bar)

    CERN Document Server

    Costella, J P

    1995-01-01

    In this short note, I point out that [p,q] does not equal (i h-bar), contrary to the original claims of Born and Jordan, and Dirac. Rather, [p,q] is equal to something that is *infinitesimally different* from (i h-bar). While this difference is usually harmless, it does provide the solution of the Born-Jordan "trace paradox" of [p,q]. More recently, subtleties of a very similar form have been found to be of fundamental importance in quantum field theory.

  8. The alignment and measurement of the magnetic field for muon counter at BESIII

    CERN Document Server

    Gao, Qing; Li, Chunhua

    2016-01-01

    Based on cosmic ray events taken without magnet filed during summer shutdown, we compare the coordinates of hits in muon counter with the expected interaction point of extrapolated tracks from the inner tracking system. By minimizing the difference, we align the muon counter with the inner tracking system. The muon counter is operating in magnetic return yoke and the magnetic field has never been measured before. The strength of the magnetic field of the muon counter is measured for the first time with $\\mu^+$ and $\\mu^-$ separately. After the alignment and magnetic field measurement, the offsets of hit-position for $\\mu^+$ and $\\mu^-$ are diminished. The alignment and magnetic field measurement are adopted in the latest BESIII offline software system. This makes physics analysis involving muon counter information more reliable.

  9. Proposition of Unique Pumping System with Counter-Rotating Mechanism

    Directory of Open Access Journals (Sweden)

    Toshiaki Kanemoto

    2004-01-01

    Full Text Available Turbo-pumps have weak points, such as when the pumping operation becomes unstable in the rising portion of the head characteristics and/or the cavitation occurs under the intolerably low suction head. To overcome both weak points simultaneously, this article proposes a unique pumping system with counter-rotating mechanism, which consists of two stage impellers and a peculiar motor with double rotors. The front and the rear impellers are driven by the inner and the outer rotors of the motor, respectively, keeping the relative rotational speed constant and counter-balancing the rotational torque. Such driving conditions not only smartly improve the unstable performance at lower discharge, but also suppress the cavitation at higher discharge, in the optimum cooperation with the impeller works and the rotor outputs.

  10. Solidarity and Recognition: Geographies of Counter-globalism

    Directory of Open Access Journals (Sweden)

    James Goodman

    2006-01-01

    Full Text Available Globalism is a contested concept, but perhaps best understood as a spatial strategy, which disempowers those unable to transcend the fixity of place and social context. Under globalism fluidity becomes a key source of power, enabling the powerful to liquefy assets, to disembed, and thereby displace, political, social or ecological impacts. The infrastructures of globalism enable the disembodied extension of power across territory, to the extent that one model, universally applicable for all societies, is positioned as supreme. The only possible challenge to globalism perhaps, is through a similarly disembedded counter-movement, that mirrors the global reach and power of mainstream globalism. The praxis of counter-globalist movements suggests a different tendency, one that centres on the assertion of particularity against universality. Expressed in the legitimacy of ‘many worlds’ against ‘one world’ globalism, such resistance centres on exposing the material effects and foregrounding concrete and material experiences of globalism. Movements mobilise against the disembodied logic of globalism on the basis of co-presence and inter-subjectivity, and are embedded in relational concepts of selfhood. They are often intensely embodied and are radically emplaced through militant localism and trans-local dialogue. Counter-globalism thus does not seek to defeat geography; rather it embraces it, as the starting-point of mobilisation. The starting point of this article is thus to analyse globalism as a spatial strategy, a strategy of displacement grounded in material power. Globalism thus signifies the capacity to exploit and dominate at distance, from the sanctity of corporate boardrooms, military briefings and media cutting rooms. The claim is to universal market, military and normative power, but the impact is of extended and deepened division. Centres of power appear more as islands, or enclaves, defined against the backwash effects of counter

  11. Bars in the Barkor Street

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In daytime,the Barkor Street is bustling with tourists,pious pilgrims and merchants crowded together.Only when darkness falls does the street become tranquil.Nevertheless,the area surrounding the Barkor Street(from Tibetan Hospital compound extending to east Beijing Road)is then revived by various kinds of bars.

  12. Long term compliance with California's Smoke-Free Workplace Law among bars and restaurants in Los Angeles County.

    Science.gov (United States)

    Weber, M D; Bagwell, D A S; Fielding, J E; Glantz, S A

    2003-09-01

    To assess long term compliance with the California Smoke-Free Workplace Law in Los Angeles County freestanding bars and bar/restaurants. Population based annual site inspection survey of a random sample of Los Angeles County freestanding bars and bar/restaurants was conducted from 1998 to 2002. The primary outcomes of interest were patron and employee smoking. The secondary outcomes of interest were the presence of ashtrays and designated outdoor smoking areas. Significant increases in patron non-smoking compliance were found for freestanding bars (45.7% to 75.8%, p Workplace Law has been effective at reducing patron and employee smoking in Los Angeles County bars and restaurants. Recommendations include educational campaigns targeted to freestanding bar owners and staff to counter perceptions of lost revenue, more rigorous enforcement, and more severe penalties for repeat violators such as alcohol licence revocation. Policymakers can enact smoke-free restaurant and bar policies to protect employees and patrons from secondhand smoke, confident that these laws can be successfully implemented.

  13. Fatigue of reinforcing bars during hydro-demolition

    Science.gov (United States)

    Hyland, C. W. K.; Ouwejan, A.

    2017-05-01

    Reinforcing steel fractured during hydro-demolition of a reinforced concrete pier head due to low cycle flexural fatigue from vibration caused by impact of the high pressure water jet on the exposed length of the bars. Research into the fatigue performance of steel reinforcing steel tends to focus on the high cycle axial performance in reinforced concrete members and re-bending behaviour. However with the increasing use of hydro-demolition of concrete structures as part of remediation works care is required to ensure the steel reinforcement exposed to the high pressure jet of water is not going to suffer relatively low cycle flexural damage that may compromise the designed performance of the completed reinforced concrete structure. This paper describes the failure assessment, fatigue analysis, and metallographic examination that was undertaken. It was found that the rib to flank transition radius on the reinforcement steel was small enough to cause a significant stress concentration effect and was the location of fatigue crack growth. A relatively simple analysis using the maximum unrestrained cantilevered bar length and force exerted by the water jet was used to calculate the maximum expected bending moment. This was compared to the bending capacity at initiation of yielding at the rib flank transition accounting for stress concentration effects. This showed that the observed cyclic reversing ductile crack growth and fracture of the H25 bars was consistent with the loading applied. A method is proposed based on these observations to assess suitable limits for unrestrained bar lengths or maximum working offset of the water jet from the point of bar restraint when undertaking hydro-demolition work. The fatigue critical performance requirements of AS/NZS4671 500E bars are also therefore compared with those of BS4449:2005 and PN EN/ISO 15630-1:2011 for comparable 500C bars

  14. A continuous sensor for damage detection in bars

    Science.gov (United States)

    Sundaresan, Mannur J.; Ghoshal, Anindya; Schulz, Mark J.

    2002-08-01

    The concept of a continuous sensor for detecting vibration and stress waves in bars is investigated in this paper. This type of sensor is a long tape with a number of sensing nodes that are electrically connected together to form a single sensor with one channel of data output. The spacing of the sensor nodes can be designed such that the sensor is capable of detecting acoustic emissions (AEs) occurring at any point along the length of the sensor. An active fiber composite material or piezoceramic wafers can be used as the active element of the sensor. The characteristics of this new type of sensor were investigated by a simplified simulation and through experiments. The scope of the simulation is primarily to determine the characteristics of the new type of sensor that is proposed and the simulation is not intended to model the complex dispersion characteristics of guided waves in bars. The sensor was modeled as being integrated within a uniform cantilever bar to measure longitudinal stress wave propagation. Damping was included in the model to attenuate the wave as it travels. The sensor was connected to an electrical tuning circuit to examine the capability to filter out undesirable noise due to ambient vibration that would occur in practice. The elastic response of the bar was computed in closed form, and the coupled piezoelectric constitutive equations and electric circuit equations were solved using the Newmark-Beta numerical integration method. Strain, vibration, and wave propagation responses were simulated and results indicate that damage to the bar can be detected by recognizable changes in the sensor output as the wave propagates along the bar and passes over each sensor node. Experiments were performed to verify the concept of the continuous sensor on a composite bar. The testing showed the continuous sensor can replace four or more individual sensors to detect AEs and thus may be a practical method for structural health monitoring.

  15. 超微针刀反阿是穴疗法治疗膝骨性关节炎疗效观察%Efficacy observation on osteoarthritis of the knee treated with the ultrastructural acnpotomy therapy at the counter-Ashi points

    Institute of Scientific and Technical Information of China (English)

    刘美荣; 李里; 贺志伟

    2012-01-01

    Objective To compare the difference in the efficacy on osteoarthritis of the knee between the ultra-structural acupotomy therapy at the counter-Ashi points and the conventional acupuncture-moxibustion therapy. Methods Sixty cases were randomly devided into an ultrastructural acupotomy therapy group(group A) and a conventional acupuncture-moxibustion group(group B), 30 cases in each one. In the group A, the ultrastructural acupotomy therapy was applied to the counter-Ashi points in which pain was alleviated or disappeared on pressure. The treatment was given once a week, lasting for 1 month. In the group B, the acupuncture-moxibustion therapy was applied to Dubi (ST 35) , Neixiyan (EX-LE 4), Zusanli (ST 36) , Yanglingquan (GB 34), etc. The treatment was given once daily, lasting for 1 month. Before and after treatment, the Visual Analogue Scale (VAS), Ly-sholm knee joint scale and the affected knee joint flexion angle were observed in the two groups. The clinical efficacy was compared between the two groups. Results After treatment, the scores of VAS, Lysholm knee joint scale and the affected knee joint flexion angle were improved obviously as compared with those before treatment in either group (P<0. 01, P<0. 05). The results of them in the group A were superior apparently to those in the group B (all P<. 0. 05). The total effective rate in the group A was superior to that in the group B [80. 0%(24/30) vs 60. 0%(18/30), P<0. 053. Conclusion The ultrastructural acupotomy therapy at the counter-Ashi points achieves the superior clinical efficacy on osteoarthritis of the knee as compared with the conventional acupuncture therapy. It relieves pain and improves the motion range of knee joint effectively. It is simple in operation and less in treatment frequency.%目的:比较超微针刀反阿是穴疗法与常规针灸疗法治疗膝骨性关节炎的疗效差异.方法:将60例患者随机分为超微针刀组、常规针灸组,每组30例.超微针刀组在

  16. Free-vibration acoustic resonance of a nonlinear elastic bar

    Science.gov (United States)

    Tarumi, Ryuichi; Oshita, Yoshihito

    2011-02-01

    Free-vibration acoustic resonance of a one-dimensional nonlinear elastic bar was investigated by direct analysis in the calculus of variations. The Lagrangian density of the bar includes a cubic term of the deformation gradient, which is responsible for both geometric and constitutive nonlinearities. By expanding the deformation function into a complex Fourier series, we derived the action integral in an analytic form and evaluated its stationary conditions numerically with the Ritz method for the first three resonant vibration modes. This revealed that the bar shows the following prominent nonlinear features: (i) amplitude dependence of the resonance frequency; (ii) symmetry breaking in the vibration pattern; and (iii) excitation of the high-frequency mode around nodal-like points. Stability of the resonant vibrations was also addressed in terms of a convex condition on the strain energy density.

  17. Galaxy Zoo: Observing Secular Evolution Through Bars

    CERN Document Server

    Cheung, Edmond; Masters, Karen L; Nichol, Robert C; Bosma, A; Bell, Eric F; Faber, S M; Koo, David C; Lintott, Chris; Melvin, Thomas; Schawinski, Kevin; Skibba, Ramin A; Willett, Kyle W

    2013-01-01

    Observations have shown that there is a connection between the presence of a bar and the properties of a galaxy. In a parallel effort, simulations have shown that this connection is consistent with the theory of bar-driven secular evolution. But observational evidence of bar-driven secular evolution has been sparse. In this paper, we use the Galaxy Zoo 2 dataset to look for evidence of this secular evolution. Our sample consists of 13,295 disk galaxies, with an overall bar fraction of 23.6 +/- 0.4%, of which 1,154 barred galaxies also have bar length measurements. These samples are the largest ever used to study the role of bars in disk galaxy evolution. We characterize bars by the bar likelihood, the likelihood a bar is present in a given galaxy, and the bar length. These two bar properties show interesting correlations with the specific star formation rate and the inner central structure of galaxies. Comparing these observations to state-of-the-art simulations of bar evolution, which include live halos and ...

  18. The transparent microstrip gas counter

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Hiroyuki, E-mail: leo@q.t.u-tokyo.ac.j [University of Tokyo, Tokyo 113-8656 (Japan); Fujita, Kaoru; Fujiwara, Takeshi [University of Tokyo, Tokyo 113-8656 (Japan); Niko, Hisako; Guerard, Bruno [Institute of Max von Laue and Paul Langevin, BP 156, 38042 Grenoble, Cedex 9 (France); Fraga, Francisco [Departamento de Fisica, LIP-Coimbra, Universidade de Coimbra, 3000 Coimbra (Portugal); Iyomoto, Naoko [University of Tokyo, Tokyo 113-8656 (Japan)

    2010-11-01

    Conventional MSGCs are made of metal electrodes that might absorb or reflect optical photons. If the electrodes are made of transparent material like ITO, we could take advantage of optical readout. A gas scintillation proportional counter made of ITO MSGC is fabricated and tested where both optical and charge signals are obtained. We have selected a multi-grid structure that can avoid charge-up problem with normal transparent glass substrate. Test results with Ar and CF{sub 4} gas mixture showed a stable gas gain of {approx}2800 and {approx}110 optical photons for 6 keV X-rays. Position sensing with PSPMT has successfully been demonstrated.

  19. COUNTER-TERRORISM IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Jordan Sebastian Meliala

    2015-04-01

    Full Text Available Since the incident of World Trade Center (WTC in USA, Indonesia has become an easy target for the next terrorism. Counterterrorist campaigns can be undertaken by military and paramilitary forces. Counterterrorism refers to proactive policies that specifically seek to eliminate terrorist environments and groups, Regardless of which policy is selected, the ultimate goal of counterterrorism is clear: to save lives by proactively preventing or decreasing the number of terrorist attacks. But, so far the Government of Indonesia is only able to capture the terrorists but is unable to eradicate terrorism. Therefore, the government of Indonesia still needs a comprehensive ways to counter terrorism in Indonesia

  20. Condensation Particle Counter Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Kuang, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-02-01

    The Model 3772 CPC is a compact, rugged, and full-featured instrument that detects airborne particles down to 10 nm in diameter, at an aerosol flow rate of 1.0 lpm, over a concentration range from 0 to 1x104 #/cc. This CPC is ideally suited for applications without high concentration measurements, such as basic aerosol research, filter and air-cleaner testing, particle counter calibrations, environmental monitoring, mobile aerosol studies, particle shedding and component testing, and atmospheric and climate studies.

  1. Behavior of reinforced concrete beams reinforced with GFRP bars

    Directory of Open Access Journals (Sweden)

    D. H. Tavares

    Full Text Available The use of fiber reinforced polymer (FRP bars is one of the alternatives presented in recent studies to prevent the drawbacks related to the steel reinforcement in specific reinforced concrete members. In this work, six reinforced concrete beams were submitted to four point bending tests. One beam was reinforced with CA-50 steel bars and five with glass fiber reinforced polymer (GFRP bars. The tests were carried out in the Department of Structural Engineering in São Carlos Engineering School, São Paulo University. The objective of the test program was to compare strength, reinforcement deformation, displacement, and some anchorage aspects between the GFRP-reinforced concrete beams and the steel-reinforced concrete beam. The results show that, even though four GFRP-reinforced concrete beams were designed with the same internal tension force as that with steel reinforcement, their capacity was lower than that of the steel-reinforced beam. The results also show that similar flexural capacity can be achieved for the steel- and for the GFRP-reinforced concrete beams by controlling the stiffness (reinforcement modulus of elasticity multiplied by the bar cross-sectional area - EA and the tension force of the GFRP bars.

  2. Going Smokefree Matters - Bars and Restaurants Infographic

    Data.gov (United States)

    U.S. Department of Health & Human Services — Explore the Going Smokefree Matters – Bars and Restaurants Infographic which outlines key facts related to the effects of secondhand smoke exposure in bars and...

  3. On the possibility to detect the Higgs decay $H\\to b\\bar b$ in the associated $Z + b\\bar b$ production at the LHC

    CERN Document Server

    Lipatov, A V

    2015-01-01

    We investigate the possibility to detect the scalar Higgs boson decay $H\\to b\\bar b$ in the associated $Z$ and $b\\bar b$ production at the LHC using the $k_T$-factorization QCD approach. Our consideration is based on the off-shell (i.e. depending on the transverse momenta of initial quarks and gluons) production amplitudes of $q^* \\bar q^* \\to Z H \\to Z q^\\prime \\bar q^\\prime$, $q^* \\bar q^* \\to Z q^\\prime \\bar q^\\prime$ and $g^* g^* \\to Z q^\\prime \\bar q^\\prime$ partonic subprocesses supplemented with the Catani-Ciafoloni-Fiorani-Marchesini (CCFM) dynamics of parton densities in a proton. We argue that the $H \\to b\\bar b$ signal could be observed at large transverse momenta near Higgs boson peak despite the overwhelming QCD background, and point out an important role of angular correlations between the produced $Z$ boson and $b$-quarks.

  4. Time-dependent Corotation Resonance in Barred Galaxies

    Science.gov (United States)

    Wu, Yu-Ting; Pfenniger, Daniel; Taam, Ronald E.

    2016-10-01

    The effective potential neighboring the corotation resonance region in barred galaxies is shown to be strongly time-dependent in any rotating frame, due to the competition of nearby perturbations of similar strengths with differing rotation speeds. Contrary to the generally adopted assumption that in the bar rotating frame the corotation region should possess four stationary equilibrium points (Lagrange points), with high quality N-body simulations, we localize the instantaneous equilibrium points (EPs) and find that they circulate or oscillate broadly in azimuth with respect to the pattern speeds of the inner or outer perturbations. This implies that at the particle level the Jacobi integral is not well conserved around the corotation radius. That is, angular momentum exchanges decouple from energy exchanges, enhancing the chaotic diffusion of stars through the corotation region.

  5. Time-dependent Corotation Resonance in Barred Galaxies

    CERN Document Server

    Wu, Yu-Ting; Taam, Ronald E

    2016-01-01

    The effective potential neighboring the corotation resonance region in barred galaxies is shown to be strongly time-dependent in any rotating frame because of the competition of nearby perturbations of similar strengths with differing rotation speeds. Contrary to the generally adopted assumption, that in the bar rotating frame the corotation region should possess four stationary equilibrium points (Lagrange points), with high quality N-body simulations we localize the instantaneous equilibrium points and find that they circulate or oscillate broadly in azimuth with respect to the pattern speeds of the inner or outer perturbations. This implies that at the particle level the Jacobi integral is not well conserved around the corotation radius. That is, angular momentum exchanges decouple from energy exchanges, enhancing the chaotic diffusion of stars through the corotation region.

  6. While in Shanghai,Enjoy Unigue Bars!

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Today, bars are nothingnew for people who live inmajor cities. Bars have becomeso common that they have toseek a revolution for survival.It seems the only way tosurvive the fierce market competitionis to take the lead in being special. Asa result, some bars are attractingcustomers with unique features.Among them are:

  7. Evidence of a mis-aligned secondary bar in the Large Magellanic Cloud

    CERN Document Server

    Subramanian, A

    2004-01-01

    Evidence of a mis-aligned secondary bar, within the primary bar of the Large Magellanic Cloud (LMC) is presented. The density distribution and the de-reddened mean magnitudes ($I_0$) of the red clump stars in the bar obtained from the OGLE II data are used for this study. The bar region which predominantly showed wavy pattern in the line of sight in \\citet{a03} was located. These points in the X-Z plane delineate an S-shaped pattern, clearly indicating a mis-aligned bar. This feature is statistically significant and does not depend on the considered value of $I_0$ for the LMC center. The rest of the bar region were not found to show the warp or the wavy pattern. The secondary bar is found to be considerably elongated in the Z-direction, with an inclination of 66$^o$.5 $\\pm$ 0$^o$.9, whereas the undisturbed part of the primary bar is found to have an inclination of 15$^o$.1 $\\pm$ 2$^o$.7, such that the eastern sides are closer to us with respect to the western sides of both the bars. The PA$_{maj}$ of the seco...

  8. Effect of flaxseed flour incorporation on the physical properties and consumer acceptability of cereal bars.

    Science.gov (United States)

    Khouryieh, H; Aramouni, F

    2013-12-01

    Extensive research has revealed numerous nutritional and health benefits of flaxseed due primarily to its nutrients content. The objective of this study was to evaluate the effect of flaxseed flour addition on the physical and sensory characteristics of cereal bars. Four formulations of the flaxseed cereal bars were prepared by partially replacing oats with flaxseed flour added at levels of 0 (control), 6%, 12% and 18%. There were no significant differences (p > 0.05) in water activity, moisture and firmness values between the flaxseed bars and control. Flaxseed addition significantly (p bars. There were no significant differences (p > 0.05) between the 12% flax cereal bars and the control with respect to sensory attributes and overall acceptability. The overall acceptability for both 12% flax bars and the control was in between 'like moderately' and 'like slightly' on the 9-point hedonic scale. The overall acceptability was most highly correlated with flavor acceptability for both control (r = 0.80) and 12% flax (r = 0.82) cereal bars. Flaxseed bars provided 12% dietary fiber of the daily recommended value. These results indicated that flaxseed flour incorporation up to 12% substantially enhanced the nutritional qualities of the cereal bars without affecting their sensory and quality properties.

  9. Damping of the Milky Way Bar by Manifold-driven Spirals

    Science.gov (United States)

    Łokas, Ewa L.

    2016-10-01

    We describe a new phenomenon of “bar damping” that may have played an important role in shaping the Milky Way bar and bulge as well as its spiral structure. We use a collisionless N-body simulation of a Milky Way–like galaxy initially composed of a dark matter halo and an exponential disk with a Toomre parameter slightly above unity. In this configuration, dominated by the disk in the center, a bar forms relatively quickly, after 1 Gyr of evolution. This is immediately followed by the formation of two manifold-driven spiral arms and the outflow of stars that modifies the potential in the vicinity of the bar, apparently shifting the position of the L 1/L 2 Lagrange points. This modification leads to the shortening of the bar and the creation of a next generation of manifold-driven spiral arms at a smaller radius. The process repeats itself a few times over the next 0.5 Gyr resulting in further substantial weakening and shortening of the bar. The time when the damping comes to an end coincides with the first buckling episode in the bar that rebuilds the orbital structure so that no more new spiral arms are formed. The morphology of the bar and the spiral structure at this time show remarkable similarity to the present properties of the Milky Way. Later on, the bar starts to grow rather steadily again, weakened only by subsequent buckling episodes occurring at more distant parts of the disk.

  10. TEEPEE DINING & BAR -TELTTARAVINTOLAN PERUSTAMINEN

    OpenAIRE

    Meronen, Pirita

    2015-01-01

    Opinnäytetyönä tein manuaalin Teepee Dining & Bar -telttaravintolan perustamisesta Suomen Teemaravintolat Oy:lle. Seurasin toimeksiantajani etenemistä ravintolan perustamisprosessissa ja raportoin kaikki ravintolan perustamiseen liittyvät vaiheet manuaaliin. Lisäksi kirjasin manuaaliin kaikki tarvittavat yhteyshenkilöt ja luvat, joita tarvitaan ravintolatoiminnan aloittamiseen. Aloitin opinnäytetyöni pohjatyön tiedon keräämisellä ja haastattelin toimeksiantajaani sekä tutustuin ravintola...

  11. Torsional Split Hopkinson Bar Optimization

    Science.gov (United States)

    2012-04-10

    pillow blocks used to mount the incident and transmitter bars are cast iron based- mounted Babbitt -lined bearing split, for 1 in. shaft diameter...Total 1 McMaster-CARR 5911k16 1" Dia, 6" long anodized aluminum shaft $15.38 8 $123.04 2 McMaster-CARR 6359k37 Cast iron base-mounted babbitt

  12. Pressure Points: Preventing and Controlling Hypertension

    Science.gov (United States)

    Skip Navigation Bar Home Current Issue Past Issues Pressure Points: Preventing and Controlling Hypertension Past Issues / Summer ... turn Javascript on. May is National High Blood Pressure Education Month, a good time for many Americans ...

  13. Biogenic traces in modern point bar deposits of the Middle-Lower Reaches of Yellow River in Jiaozuo area, Henan Province%黄河中下游焦作区段现代边滩沉积中的生物遗迹

    Institute of Scientific and Technical Information of China (English)

    胡斌; 王媛媛; 张璐; 单婷婷

    2012-01-01

    沉积物中的生物遗迹记录是生物与环境相互作用的结果,是沉积环境、气候及生态环境的良好指示标志.文中主要研究了黄河中下游焦作区段现代边滩沉积物中的生物遗迹及其造迹者的组成与分布特点,即:(1)近岸边滩:几乎无植被,以层面上的生物觅食迹为主,其造迹生物主要有鸟类、长泥甲虫(鞘翅目长泥甲科)和隐翅虫(鞘翅目隐翅虫科)等;(2)远岸边滩:有大量植物根出现,大多数生物遗迹是层内U形、Y形和W形潜穴以及层面上的F形、Y形爬行迹和觅食迹,其主要造迹生物为蝼蛄(直翅目蝼蛄科)、蟋蟀、狼蛛和蠕虫类等;(3)泛滥平原:出现大量植物根,以层内J形、漏斗形等的生物居住迹和进食迹为主,主要造迹生物为蝼蛄、蟋蟀、田鼠、蚁狮和狼蛛等.基于沉积物粒度分析、总有机碳测定、菌落平板计数法等手段分析得知,研究区现代生物遗迹的深度随沉积物中微生物群落数量的增加及植物根长度的增长而增加,而丰度和分异度随沉积物粒度的递减及总有机碳含量的增加而增大.该成果一方面能为研究区黄河边滩上生物成因的沉积构造提供新资料,另一方面也能为地史时期河流沉积环境的研究乃至古地理、古生态环境重建提供生物遗迹学方面的科学依据.%Biogenic traces records are the results of the interaction of organisms and environment and the good indicator of sedimentary environment, climate and the ecological environment. The composition and distribution characters of biogenic traces and their makers in modern point bar deposits of the Middle-Lower Reaches of Yellow River in Jiaozuo area, Henan Province, are as follows: (1 ) The main trace-makers on point bar near riverbed are birds and Coleptera. The main traces are the feeding traces of Co-leptera and birds on the bedding plane. (2) The main trace-makers on distal point bar and temporal channels are

  14. Effect of bars on the galaxy properties

    CERN Document Server

    Vera, Matias; Coldwell, Georgina

    2016-01-01

    Aims: With the aim of assessing the effects of bars on disc galaxy properties, we present an analysis of different characteristics of spiral galaxies with strong, weak and without bars. Method: We identified barred galaxies from the Sloan Digital Sky Survey. By visual inspection, we classified the face-on spiral galaxies brighter than g<16.5 mag into strong-bar, weak-bar and unbarred. In order to provide an appropiate quantification of the influence of bars on galaxy properties, we also constructed a suitable control sample of unbarred galaxies with similar redshift, magnitude, morphology, bulge sizes, and local density environment distributions to that of barred galaxies. Results: We found 522 strong-barred and 770 weak-barred galaxies, representing a 25.82% of the full sample of spiral galaxies, in good agreement with previous studies. We also found that strong-barred galaxies show less efficient star formation activity and older stellar populations compared to weak-barred and unbarred spirals from the c...

  15. New Constraints on the Galactic Bar

    CERN Document Server

    Minchev, I; Quillen, A C

    2007-01-01

    Previous work has related the Galactic Bar to structure in the local stellar velocity distribution. Here we show that the Bar also influences the spatial gradients of the velocity vector via the Oort constants. By numerical integration of test-particles we simulate measurements of the Oort C value in a gravitational potential including the Galactic Bar. We account for the observed trend that C is increasingly negative for stars with higher velocity dispersion. By comparing measurements of C with our simulations we improve on previous models of the Bar, estimating that the Bar pattern speed is Omega_b/Omega_0=1.87\\pm0.04, where Omega_0 is the local circular frequency, and the Bar angle lies within 20Bar affects measurements of the Oort constants A and B less than ~2 km/s/kpc for the hot stars.

  16. On generating counter-rotating streamwise vortices

    KAUST Repository

    Winoto, S H

    2015-09-23

    Counter-rotating streamwise vortices are known to enhance the heat transfer rate from a surface and also to improve the aerodynamic performance of an aerofoil. In this paper, some methods to generate such counter-rotating vortices using different methods or physical conditions will be briefly considered and discussed.

  17. Counter traction makes endoscopic submucosal dissection easier.

    Science.gov (United States)

    Oyama, Tsuneo

    2012-11-01

    Poor counter traction and poor field of vision make endoscopic submucosal dissection (ESD) difficult. Good counter traction allows dissections to be performed more quickly and safely. Position change, which utilizes gravity, is the simplest method to create a clear field of vision. It is useful especially for esophageal and colon ESD. The second easiest method is clip with line method. Counter traction made by clip with line accomplishes the creation of a clear field of vision and suitable counter traction thereby making ESD more efficient and safe. The author published this method in 2002. The name ESD was not established in those days; the name cutting endoscopic mucosal resection (EMR) or EMR with hook knife was used. The other traction methods such as external grasping forceps, internal traction, double channel scope, and double scopes method are introduced in this paper. A good strategy for creating counter traction makes ESD easier.

  18. The Omega Counter, a Frequency Counter Based on the Linear Regression

    CERN Document Server

    Rubiola, E; Bourgeois, P -Y; Vernotte, F

    2015-01-01

    This article introduces the {\\Omega} counter, a frequency counter -- or a frequency-to-digital converter, in a different jargon -- based on the Linear Regression (LR) algorithm on time stamps. We discuss the noise of the electronics. We derive the statistical properties of the {\\Omega} counter on rigorous mathematical basis, including the weighted measure and the frequency response. We describe an implementation based on a SoC, under test in our laboratory, and we compare the {\\Omega} counter to the traditional {\\Pi} and {\\Lambda} counters. The LR exhibits optimum rejection of white phase noise, superior to that of the {\\Pi} and {\\Lambda} counters. White noise is the major practical problem of wideband digital electronics, both in the instrument internal circuits and in the fast processes which we may want to measure. The {\\Omega} counter finds a natural application in the measurement of the Parabolic Variance, described in the companion article arXiv:1506.00687 [physics.data-an].

  19. $\\bar{\\psi} \\psi$-condensate in constant magnetic fields

    CERN Document Server

    Anguiano-Galicia, M de J; Raya, A

    2007-01-01

    We solve Dirac equation in the presence of a constant magnetic field in (3+1)- and (2+1)-dimensions. Quantizing the fermion field, we calculate $\\bar{\\psi} \\psi$-condensate from first principles for parity conserving and violating Lagrangians for arbitrary field strength. We make comparison with the results already known in the literature for some particular cases and point out the relevance of our work for possible physical applications.

  20. Acceptance of Nordic snack bars in children aged 8–11 years

    Directory of Open Access Journals (Sweden)

    Anna Holmer

    2012-04-01

    Full Text Available Background: A health promoting diet is suggested to be tailored to regional circumstances to preserve the cultural diversity in eating habits, as well as contribute to more environmentally friendly eating. It may influence consumer acceptance, however, if the components of the diet differs considerably from their habitual food. Objective: This study aimed to investigate whether snack bars composed of Nordic ingredients were accepted by 8–11 year-old Danish (n=134 and Swedish (n=109 children.Design: A seven-point hedonic scale was used to measure the children's acceptance of five snack bars that varied in their composition of whole grains, berries and nuts. A preference rank ordering of the five bars was also performed. Results: The results showed that samples that were rated highest in liking and were most preferred in both countries were a kamut/pumpkin bar and an oat/cranberry bar. The sample with the lowest rating that was also least preferred was a pumpernickel/sea buckthorn bar. Flavour was the most important determinant of overall liking followed by texture, odour and appearance. Conclusions: Children's acceptances and preferences were highly influenced by the sensory characteristics of the bars, mainly flavour. In agreement with earlier studies, the novel food ingredients seemed to influence children's preferences. The Nordic snack bars may have a potential to be a snack option for Danish and Swedish school children, but repeated exposures to the products are recommended to increase children's acceptance.

  1. Safety evaluation and the static-dynamic coupling analysis of counter-arched slab in plunge pool

    Institute of Scientific and Technical Information of China (English)

    LIAN JiJian; LIU XiZhu; MA Bin

    2009-01-01

    The stability of plunge pool slab of drainage structure is crucial to energy dissipation, but the working conditions of counter-arched slab are very complex and its stress procedure is considerably nonlinear and coupling. Therefore, a nonlinear static and dynamic coupling method to analyze the counter-arched slab configuration is put forward, which can reflect the coupling of dynamic loads, slab, anchor bars, groundwork and abutment as well as the dynamic procedure of instability. Various nonlinear factors and static-dynamic coupling are taken into consideration, and the working conditions, stress mechanism, dynamic instability procedure and influential instability factors are revealed. The proposed method thus provides a comprehensive safety evaluation method of plunge pool, which further pro-vides an important theoretical basis for engineering design of counter-arched slab in plunge pool.

  2. Safety evaluation and the static-dynamic coupling analysis of counter-arched slab in plunge pool

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The stability of plunge pool slab of drainage structure is crucial to energy dissipation,but the working conditions of counter-arched slab are very complex and its stress procedure is considerably nonlinear and coupling.Therefore,a nonlinear static and dynamic coupling method to analyze the counter-arched slab configuration is put forward,which can reflect the coupling of dynamic loads,slab,anchor bars,groundwork and abutment as well as the dynamic procedure of instability.Various nonlinear factors and static-dynamic coupling are taken into consideration,and the working conditions,stress mechanism,dynamic instability procedure and influential instability factors are revealed.The proposed method thus provides a comprehensive safety evaluation method of plunge pool,which further pro-vides an important theoretical basis for engineering design of counter-arched slab in plunge pool.

  3. Stress tracking in thin bars by eigenstrain actuation

    Science.gov (United States)

    Schoeftner, J.; Irschik, H.

    2016-11-01

    This contribution focuses on stress tracking in slender structures. The axial stress distribution of a linear elastic bar is investigated, in particular, we seek for an answer to the following question: in which manner do we have to distribute eigenstrains, such that the axial stress in a bar is equal to a certain desired stress distribution, despite external forces or support excitations are present? In order to track a certain time- and space-dependent stress function, smart actuators, such as piezoelectric actuators, are needed to realize eigenstrains. Based on the equation of motion and the constitutive relation, which relate stress, strain, displacement and eigenstrains, an analytical solution for the stress tracking problem is derived. The starting point for the derivation of a solution for the stress tracking problem is a semi-positive definite integral depending on the error stress which is the difference between the actual stress and the desired stress. Our derived stress tracking theory is verified by two examples: first, a clamped-free bar which is harmonically excited is investigated. It is shown under which circumstances the axial stress vanishes at every location and at every time instant. The second example is a support-excited bar with end mass, where a desired stress profile is prescribed.

  4. Validation of an automated mite counter for Dermanyssus gallinae in experimental laying hen cages.

    Science.gov (United States)

    Mul, Monique F; van Riel, Johan W; Meerburg, Bastiaan G; Dicke, Marcel; George, David R; Groot Koerkamp, Peter W G

    2015-08-01

    For integrated pest management (IPM) programs to be maximally effective, monitoring of the growth and decline of the pest populations is essential. Here, we present the validation results of a new automated monitoring device for the poultry red mite (Dermanyssus gallinae), a serious pest in laying hen facilities world-wide. This monitoring device (called an "automated mite counter") was validated in experimental laying hen cages with live birds and a growing population of D. gallinae. This validation study resulted in 17 data points of 'number of mites counted' by the automated mite counter and the 'number of mites present' in the experimental laying hen cages. The study demonstrated that the automated mite counter was able to track the D. gallinae population effectively. A wider evaluation showed that this automated mite counter can become a useful tool in IPM of D. gallinae in laying hen facilities.

  5. Instability of counter-rotating stellar disks

    Science.gov (United States)

    Hohlfeld, R. G.; Lovelace, R. V. E.

    2015-09-01

    We use an N-body simulation, constructed using GADGET-2, to investigate an accretion flow onto an astrophysical disk that is in the opposite sense to the disk's rotation. In order to separate dynamics intrinsic to the counter-rotating flow from the impact of the flow onto the disk, we consider an initial condition in which the counter-rotating flow is in an annular region immediately exterior the main portion of the astrophysical disk. Such counter-rotating flows are seen in systems such as NGC 4826 (known as the "Evil Eye Galaxy"). Interaction between the rotating and counter-rotating components is due to two-stream instability in the boundary region. A multi-armed spiral density wave is excited in the astrophysical disk and a density distribution with high azimuthal mode number is excited in the counter-rotating flow. Density fluctuations in the counter-rotating flow aggregate into larger clumps and some of the material in the counter-rotating flow is scattered to large radii. Accretion flow processes such as this are increasingly seen to be of importance in the evolution of multi-component galactic disks.

  6. 21 CFR 866.2170 - Automated colony counter.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2170 Automated colony counter. (a) Identification. An automated colony counter is a mechanical device intended for...

  7. BaBar Data Aquisition

    CERN Document Server

    Scott, I; Grosso, P; Hamilton, R T; Huffer, M E; O'Grady, C; Russell, J J

    1998-01-01

    The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by analysing the decays of a very large sample of B and Bbar mesons produced at the high luminosity PEP-11 accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detector subsystems. Data from the front end electronics is read into commercial VME processors via a custom "personality card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data are read out via a non-blocking network switch to a farm of commercial UNIX processors. Careful design of the core data acquisition code has enabled us to sustain events rates in excess of 20 kHz while maintaini...

  8. The Carnegie-Irvine Galaxy Survey. V. Statistical Study of Bars and Buckled Bars

    Science.gov (United States)

    Li, Zhao-Yu; Ho, Luis C.; Barth, Aaron J.

    2017-08-01

    Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle (i), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high i) or as a barlens structure (at low i). We visually identify bars, boxy/peanut-shaped bulges, and barlenses, and examine the dependence of bar and buckled bar fractions on host galaxy properties, including Hubble type, stellar mass, color, and gas mass fraction. We find that the barred and unbarred disks show similar distributions in these physical parameters. The bar fraction is higher (70%-80%) in late-type disks with low stellar mass (M * 1010.5 M ⊙), and decreases with higher gas mass ratio. These results suggest that bars are more difficult to grow in massive disks that are dynamically hotter than low-mass disks. However, once a bar forms, it can easily buckle in the massive disks, where a deeper potential can sustain the vertical resonant orbits. We also find a probable buckling bar candidate (ESO 506-G004) that could provide further clues to understand the timescale of the buckling process.

  9. Taming Past LTL and Flat Counter Systems

    CERN Document Server

    Demri, Stéphane; sangnier, Arnaud

    2012-01-01

    Reachability and LTL model-checking problems for flat counter systems are known to be decidable but whereas the reachability problem can be shown in NP, the best known complexity upper bound for the latter problem is made of a tower of several exponentials. Herein, we show that the problem is only NP-complete even if LTL admits past-time operators and arithmetical constraints on counters. Actually, the NP upper bound is shown by adequately combining a new stuttering theorem for Past LTL and the property of small integer solutions for quantifier-free Presburger formulae. Other complexity results are proved, for instance for restricted classes of flat counter systems.

  10. GEIGER-MULLER TYPE COUNTER TUBE

    Science.gov (United States)

    Fowler, I.L.; Watt, L.A.K.

    1959-12-15

    A single counter tube capable of responding to a wide range of intensities is described. The counter tube comprises a tubular cathode and an anode extending centrally of the cathode. The spacing between the outer surface of the anode and the inner surface of the cathode is varied along the length of the tube to provide different counting volumes in adjacent portions of the tube. A large counting volume in one portion adjacent to a low-energy absorption window gives adequate sensitivity for measuring lowintensity radiation, while a smaller volume with close electrode spacing is provided in the counter to make possible measurement of intense garnma radiation fields.

  11. Time interleaved counter analog to digital converters

    OpenAIRE

    Danesh, Seyed Amir Ali

    2011-01-01

    The work explores extending time interleaving in A/D converters, by applying a high-level of parallelism to one of the slowest and simplest types of data-converters, the counter ADC. The motivation for the work is to realise high-performance re-configurable A/D converters for use in multi-standard and multi-PHY communication receivers with signal bandwidths in the 10s to 100s of MHz. The counter ADC requires only a comparator, a ramp signal, and a digital counter, where the ...

  12. P{bar P} collider physics

    Energy Technology Data Exchange (ETDEWEB)

    Demarteau, M. [State Univ. of New York, Stony Brook, NY (United States)

    1992-04-01

    A brief introduction to {bar p}p collider physics is given. Selected results from the collider experiments at the CERN S{bar p}pS and the Tevatron collider are described. The emphasis is on experimental aspects of {bar p}p collisions. Minimum bias physics and the production of jets, Intermediate Vector Bosons and heavy flavors is reviewed. The outlook for physics at hadron colliders for the near future is briefly discussed.

  13. Installation of Shimming Bars for CYCIAE-100

    Institute of Scientific and Technical Information of China (English)

    LV; Yin-long; WANG; Zhen-hui; ZHONG; Jun-qing; LIU; Geng-shou

    2012-01-01

    <正>The 100 MeV high intensity proton cyclotron, CYCIAE-100, is the most critical equipment of the BRIF project at CIAE. The shimming bars are used to get the isochronous magnetic field. In the process of magnetic mapping and shimming, the bars should be repeated the installed and disassembly for about 10 times. Each time the installation precision must be ensured. The bars installation schedule and quality are directly related to the BRIF project progress.

  14. Periodic body-and-bar frameworks

    CERN Document Server

    Borcea, Ciprian S; Tanigawa, Shin-ichi

    2011-01-01

    Abstractions of crystalline materials known as periodic body-and-bar frameworks are made of rigid bodies connected by fixed-length bars and subject to the action of a group of translations. In this paper, we give a Maxwell-Laman characterization for generic minimally rigid periodic body-and-bar frameworks. As a consequence we obtain efficient polynomial time algorithms for their recognition based on matroid partition and pebble games.

  15. Correction of beam errors in high power laser diode bars and stacks.

    Science.gov (United States)

    Monjardin, J F; Nowak, K M; Baker, H J; Hall, D R

    2006-09-01

    The beam errors of an 11 bar laser diode stack fitted with fast-axis collimator lenses have been corrected by a single refractive plate, produced by laser cutting and polishing. The so-called smile effect is virtually eliminated and collimator aberration greatly reduced, improving the fast-axis beam quality of each bar by a factor of up to 5. The single corrector plate for the whole stack ensures that the radiation from all the laser emitters is parallel to a common axis. Beam-pointing errors of the bars have been reduced to below 0.7 mrad.

  16. Nuss bar migrations: occurrence and classification

    Energy Technology Data Exchange (ETDEWEB)

    Binkovitz, Lauren E.; Binkovitz, Larry A. [Mayo Clinic, Department of Radiology, Rochester, MN (United States); Zendejas, Benjamin; Moir, Christopher R. [Mayo Clinic, Department of Surgery, Rochester, MN (United States)

    2016-12-15

    Pectus excavatum results from dorsal deviation of the sternum causing narrowing of the anterior-posterior diameter of the chest. It can result in significant cosmetic deformities and cardiopulmonary compromise if severe. The Nuss procedure is a minimally invasive technique that involves placing a thin horizontally oriented metal bar below the dorsal sternal apex for correction of the pectus deformity. To identify the frequency and types of Nuss bar migrations, to present a new categorization of bar migrations, and to present examples of true migrations and pseudomigrations. We retrospectively reviewed the electronic medical records and all pertinent radiologic studies of 311 pediatric patients who underwent a Nuss procedure. We evaluated the frequency and type of bar migrations. Bar migration was demonstrated in 23 of 311 patients (7%) and occurred within a mean period of 26 days after surgery. Bar migrations were subjectively defined as deviation of the bar from the position demonstrated on the immediate postoperative radiographs and categorized as superior, inferior, rotation, lateral or flipped using a new classification system. Sixteen of the 23 migrations required re-operation. Nuss bar migration can be diagnosed with careful evaluation of serial radiographs. Nuss bar migration has a wide variety of appearances and requires exclusion of pseudomigration resulting from changes in patient positioning between radiologic examinations. (orig.)

  17. Measurement of |V{sub cb}| using {bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}} Decays

    Energy Technology Data Exchange (ETDEWEB)

    Della Ricca, Giuseppe

    2003-08-12

    A preliminary measurement of |V{sub cb}| and the branching fraction {Beta}({bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) has been performed based on a sample of about 55,700 {bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}} decays recorded with the BABAR detector. The decays are identified in the D*{sup +} {yields} D{sup 0}{pi}{sup +} final state, with the D{sup 0} reconstructed in three different decay modes. The differential decay rate is measured as a function of the relativistic boost of the D*{sup +} in the {bar B}{sup 0} rest frame. The value of the differential decay rate at ''zero recoil'', namely the point at which the D*{sup +} is at rest in the {bar B}{sup 0} frame, is predicted in Heavy Quark Effective Theory as a kinematic factor times F(1)|V{sub cb}|, where F is the unique form factor governing the decay. We extrapolate the measured differential decay rate to the zero recoil point and obtain F(1)|V{sub cb}| = (34.03 {+-} 0.24 {+-} 1.31) x 10{sup -3}. Using a theoretical calculation for F(1) we extract |V{sub cb}| = (37.27 {+-} 0.26(stat.) {+-} 1.43(syst.){sub -1.2}{sup +1.5}(theo.)) x 10{sup -3}. From the integrated decay rate we obtain {Beta}({bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) = (4.68 {+-} 0.03 {+-} 0.29)%.

  18. Chiral Perturbation Theory and the $\\bar B \\bar B$ Strong Interaction

    CERN Document Server

    Liu, Zhan-Wei; Zhu, Shi-Lin

    2012-01-01

    We have calculated the potentials of the heavy (charmed or bottomed) pseudoscalar mesons up to $O(\\epsilon^2)$ with the heavy meson chiral perturbation theory. We take into account the contributions from the football, triangle, box, and crossed diagrams with the 2$\\phi$ exchange and one-loop corrections to the contact terms. We notice that the total 2$\\phi$-exchange potential alone is attractive in the small momentum region in the channel ${\\bar B \\bar B}^{I=1}$, ${\\bar B_s \\bar B_s}^{I=0}$, or ${\\bar B \\bar B_s}^{I=1/2}$, while repulsive in the channel ${\\bar B \\bar B}^{I=0}$. Hopefully the analytical chiral structures of the potentials may be useful in the extrapolation of the heavy meson interaction from lattice QCD simulation.

  19. submitter Performance simulation of BaBar DIRC bar boxes in TORCH

    CERN Document Server

    Föhl, K; Castillo García, L; Cussans, D; Forty, R; Frei, C; Gao, R; Gys, T; Harnew, N; Piedigrossi, D; Rademacker, J; Ros García, A; van Dijk, M

    2017-01-01

    TORCH is a large-area precision time-of-flight detector based on the DIRC principle. The DIRC bar boxes of the BaBar experiment at SLAC could possibly be reused to form a part of the TORCH detector time-of-flight wall area, proposed to provide positive particle identification of low momentum kaons in the LHCb experiment at CERN. For a potential integration of BaBar bar boxes into TORCH, new imaging readout optics are required. From the several designs of readout optics that have been considered, two are used in this paper to study the effect of BaBar bar optical imperfections on the detector reconstruction performance. The kaon-pion separation powers obtained from analysing simulated photon hit patterns show the performance reduction for a BaBar bar of non-square geometry compared to a perfectly rectangular cross section.

  20. An Investigation on the Formation of Submerged Bar Under Surges in Sandy Coastal Region

    Institute of Scientific and Technical Information of China (English)

    Mustafa DEM(I)RC(I); M.Sami AK(O)Z

    2012-01-01

    Cross-shore sediment transport rate exposed to waves is very important for coastal morphology,the design of marine structures such as seawalls,jetties,breakwaters etc,and the prevention of coastal erosion and accretion due to onoff shore sediment transportation.In the present study,the experiments on cross-shore sediment transport are carried out in a laboratory wave channel with initial beach slopes of 1/8,1/10 and 1/15.By using the regular waves with different deep-water wave steepnesses generated by a pedal-type wave generator,the geometrical characteristics of beach profiles under storm conditions and the parameters affecting on-off shore sediment transport are investigated for the beach materials with medium diameters of d50=0.25,0.32,0.45,0.62 and 0.80 mm.The offshore bar geometric characteristics are the horizontal distances from the shoreline to the bar beginning (Xb),crest (Xt),and ending (Xs) points,the depth from the bar crest to the still water level (ht),and the bar volume (Vbar).The experimental results have indicated that when the deep-water steepness (H0/L0) increased,the net movement to seaside increased.With the increasing wave steepness,the bars moved to widen herewith the vertical distances from still water level to the bar beginning (Xb),crest (Xt) and ending (Xs) points and the horizontal distances from the coast line to the bar beginning,crest and ending points increased.It was also shown from experimental results that the horizontal distances from the bar beginning and ending points to the coast line increased with the decrease of the beach slope.The experimental results obtained from this study are compared with previous experimental work and found to be of the same magnitude as the experimental measurements and followed the expected basic trend.

  1. Development of a Mobile Ice Nucleus Counter

    Energy Technology Data Exchange (ETDEWEB)

    Kok, Gregory [Droplet Measurement Technologies, Boulder, CO (United States); Kulkarni, Gourihar [Droplet Measurement Technologies, Boulder, CO (United States)

    2014-07-10

    An ice nucleus counter has been constructed. The instrument uses built-in refrigeration systems for wall cooling. A cascade refrigeration system will allow the cold wall to operate as low as -70°C, and a single stage system can operate the warm wall at -45C. A unique optical particle counter has been constructed using polarization detection of the scattered light. This allows differentiation of the particles exiting the chamber to determine if they are ice or liquid.

  2. Development of a Mobile Ice Nucleus Counter

    Energy Technology Data Exchange (ETDEWEB)

    Kok, Gregory; Kulkarni, Gourihar

    2014-07-10

    An ice nucleus counter has been constructed. The instrument uses built-in refrigeration systems for wall cooling. A cascade refrigeration system will allow the cold wall to operate as low as -70 deg C, and a single stage system can operate the warm wall at -45 deg C. A unique optical particle counter has been constructed using polarization detection of the scattered light. This allows differentiation of the particles exiting the chamber to determine if they are ice or liquid.

  3. Lifetime characteristics of Gaiger-Muller counters

    Directory of Open Access Journals (Sweden)

    Kartalović Nenad M.

    2016-01-01

    Full Text Available This paper discusses the process of functional aging of Geiger-Muller counters. Two types of Geiger-Muller counter chambers were characterized in an experiment using a combined constant voltage. Chamber A had a coaxial geometry and chamber B had a plan-parallel geometry. The experimental results indicate that the aging process was faster in the case of chambers with a coaxial geometry. The results are explained based on the process of electrical discharges in gasses.

  4. Bar pattern speeds in CALIFA galaxies. I. Fast bars across the Hubble sequence

    NARCIS (Netherlands)

    Aguerri, J. A. L.; Méndez-Abreu, J.; Falcón-Barroso, J.; Amorin, A.; Barrera-Ballesteros, J.; Cid Fernandes, R.; García-Benito, R.; García-Lorenzo, B.; González Delgado, R. M.; Husemann, B.; Kalinova, V.; Lyubenova, M.; Marino, R. A.; Márquez, I.; Mast, D.; Pérez, E.; Sánchez, S. F.; van de Ven, G.; Walcher, C. J.; Backsmann, N.; Cortijo-Ferrero, C.; Bland-Hawthorn, J.; del Olmo, A.; Iglesias-Páramo, J.; Pérez, I.; Sánchez-Blázquez, P.; Wisotzki, L.; Ziegler, B.

    2015-01-01

    Context. The bar pattern speed (Ωb) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring Ωb. The non-parametric method proposed by Tremaine & Weinberg (1984, ApJ, 282, L5; TW) and based on stellar kinematics is the mo

  5. A study of B0bar --> D(*)0 K(*)bar decays

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Gaillard, J M; Hicheur, A; Karyotakis, Yu; Lees, J P; Tisserand, V; Zghiche, A; Palano, A; Pompili, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Borgland, A W; Breon, A B; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Day, C T; Gill, M S; Gritsan, A V; Groysman, Y; Jacobsen, R G; Kadel, R W; Kadyk, J; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, Michael T; Shelkov, V G; Wenzel, W A; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Fritsch, M; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Steinke, M; Boyd, J T; Chevalier, N; Cottingham, W N; Kelly, M P; Latham, T E; Wilson, F F; Çuhadar-Dönszelmann, T; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Thiessen, D; Khan, A; Kyberd, P; Teodorescu, L; Blinov, A E; Blinov, V E; Druzhinin, V P; Golubev, V B; Ivanchenko, V N; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Yushkov, A N; Best, D; Bruinsma, M; Chao, M; Eschrich, I; Kirkby, D; Lankford, A J; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Buchanan, C; Hartfiel, B L; Foulkes, S D; Gary, J W; Shen, B C; Wang, K; Del Re, D; Hadavand, H K; Hill, E J; MacFarlane, D B; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Dahmes, B; Long, O; Lu, A; Mazur, M A; Richman, J D; Verkerke, W; Beck, T W; Eisner, A M; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dubois-Felsmann, G P; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Yang, S; Jayatilleke, S M; Mancinelli, G; Meadows, B T; Sokoloff, M D; Abe, T; Blanc, F; Bloom, P; Chen, S; Ford, W T; Nauenberg, U; Olivas, A; Rankin, P; Smith, J G; Zhang, J; Zhang, L; Chen, A; Harton, J L; Soffer, A; Toki, W H; Wilson, R J; Zeng, Q; Altenburg, D; Brandt, T; Brose, J; Dickopp, M; Feltresi, E; Hauke, A; Lacker, H M; Müller-Pfefferkorn, R; Nogowski, R; Otto, S; Petzold, A; Schubert, J; Schubert, Klaus R; Schwierz, R; Spaan, B; Sundermann, J E; Bernard, D; Bonneaud, G R; Brochard, F; Grenier, P; Schrenk, S; Thiebaux, C; Vasileiadis, G; Verderi, M; Bard, D J; Clark, P J; Lavin, D; Muheim, F; Playfer, S; Xie, Y; Andreotti, M; Azzolini, V; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Piemontese, L; Sarti, A; Treadwell, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Patteri, P; Peruzzi, I M; Piccolo, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Crosetti, G; Lo Vetere, M; Macri, M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Bailey, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Won, E; Dubitzky, R S; Langenegger, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Gaillard, J R; Morton, G W; Nash, J A; Nikolich, M B; Taylor, G P; Charles, M J; Grenier, G J; Mallik, U; Cochran, J; Crawley, H B; Lamsa, J; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Yi, J; Biasini, M; Covarelli, R; Pioppi, M; Davier, M; Giroux, X; Grosdidier, G; Höcker, A; Laplace, S; Le Diberder, F R; Lepeltier, V; Lutz, A M; Petersen, T C; Plaszczynski, S; Schune, M H; Tantot, L; Wormser, G; Cheng, C H; Lange, D J; Simani, M C; Wright, D M; Bevan, A J; Chavez, C A; Coleman, J P; Forster, I J; Fry, J R; Gabathuler, Erwin; Gamet, R; Hutchcroft, D E; Parry, R J; Payne, D J; Sloane, R J; Touramanis, C; Back, J J; Harrison, P F; Mohanty, G B; Cowan, G; Flack, R L; Flächer, H U; Green, M G; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Winter, M A; Brown, D; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Hart, P A; Hodgkinson, M C; Lafferty, G D; Lyon, A J; Williams, J C; Farbin, A; Hulsbergen, W D; Jawahery, A; Kovalskyi, D; Lae, C K; Lillard, V; Roberts, D A; Blaylock, G; Dallapiccola, C; Flood, K T; Hertzbach, S S; Kofler, R; Koptchev, V B; Moore, T B; Saremi, S; Stängle, H; Willocq, S; Cowan, R; Sciolla, G; Sekula, S J; Taylor, F; Yamamoto, R K; Mangeol, D J J; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L M; Eschenburg, V; Godang, R; Kroeger, R; Reidy, J; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Taras, P; Nicholson, H; Cavallo, N; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Bulten, H; Raven, G; Snoek, H L; Wilden, L; Jessop, C P; LoSecco, J M; Allmendinger, T; Gan, K K; Honscheid, K; Hufnagel, D; Kagan, H; Kass, R; Pulliam, T; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Brau, J E; Frey, R; Igonkina, O; Potter, C T; Sinev, N B; Strom, D; Torrence, E; Colecchia, F; Dorigo, A; Galeazzi, F; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Tiozzo, G; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; La Vaissière, C de; Del Buono, L; Hamon, O; John, M J J; Leruste, P; Malcles, J; Ocariz, J; Pivk, M; Roos, L; T'Jampens, S; Therin, G; Manfredi, P F; Re, V; Behera, P K; Gladney, L; Guo, Q H; Panetta, J; Angelini, C; Batignani, G; Bettarini, S; Bondioli, M; Bucci, F; Calderini, G; Carpinelli, M; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Martínez-Vidal, F; Neri, N; Paoloni, E; Rama, M; Rizzo, G; Sandrelli, F; Walsh, J; Haire, M; Judd, D; Paick, K; Wagoner, D E; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Miftakov, V; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Pierini, M; Piredda, G; Safai-Tehrani, F; Voena, C; Christ, S; Wagner, G; Waldi, R; Adye, T; De Groot, N; Franek, B J; Geddes, N I; Gopal, G P; Olaiya, E O; Aleksan, Roy; Emery, S; Gaidot, A; Ganzhur, S F; Giraud, P F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; London, G W; Mayer, B; Schott, G; Vasseur, G; Yéche, C; Zito, M; Purohit, M V; Weidemann, A W; Wilson, J R; Yumiceva, F X; Aston, D; Bartoldus, R; Berger, N; Boyarski, A M; Buchmüller, O L; Claus, R; Convery, M R; Cristinziani, M; De Nardo, Gallieno; Dong, D; Dorfan, J; Dujmic, D; Dunwoodie, W M; Elsen, E E; Fan, S; Field, R C; Glanzman, T; Gowdy, S J; Hadig, T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Libby, J; Luitz, S; Lüth, V; Lynch, H L; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Petrak, S; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Simi, G; Snyder, A; Soha, A; Stelzer, J; Su, D; Sullivan, M K; Vavra, J; Wagner, S R; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Young, C C; Burchat, Patricia R; Edwards, A J; Meyer, T I; Petersen, B A; Roat, C; Ahmed, S; Alam, M S; Ernst, J A; Saeed, M A; Saleem, M; Wappler, F R; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Kim, H; Ritchie, J L; Satpathy, A; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Bóna, M; Gallo, F; Gamba, D; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Poropat, P; Vuagnin, G; Panvini, R S; Banerjee, Sw; Brown, C M; Fortin, D; Jackson, P D; Kowalewski, R V; Roney, J M; Sobie, R J; Band, H R; Cheng, B; Dasu, S; Datta, M; Eichenbaum, A M; Graham, M; Hollar, J J; Johnson, J R; Kutter, P E; Li, H; Liu, R; Mihályi, A; Mohapatra, A K; Pan, Y; Prepost, R; Tan, P; Von Wimmersperg-Töller, J H; Wu, J; Wu, S L; Yu, Z; Greene, M G; Neal, H

    2004-01-01

    We present a study of the decays B0bar --> D(*)0 K(*)0bar using a sample of 124 million Upsilon(4S) --> B0bar B0 decays collected with the BaBar detector at the PEP-II asymmetric-energy e+e- collider at SLAC. We report evidence for the decay of B0 and B0bar mesons to the D*0 K_S final state with an average branching fraction BF(B --> D*0 K0bar) = (4.5 +/- 1.9 +/- 0.5) x 10^-5. Similarly, we measure BF(B --> D0 K0bar) = (6.2 +/- 1.2 +/- 0.4) x 10^-5 for the D0 K_S final state. We also measure BF(B0bar --> D0 K*0bar) = (6.2 +/- 1.4 +/- 0.6) x 10^-5 and set a 90% C.L. upper limit BF(B0bar --> D0bar K*0bar) < 4.1 x 10^-5. All results presented in this paper are preliminary.

  6. Too Much Bar and Not Enough Mitzvah? A Proposed Research Agenda on Bar/Bat Mitzvah

    Science.gov (United States)

    Schoenfeld, Stuart

    2010-01-01

    Jewish educators are understandably interested in research on how bar/bat mitzvah affect Jewish education or research on what Jewish schools have done to avoid the distortions of a focus on bar/bat mitzvah. Research might also focus on the somewhat different and more ambitious topic of the role that bar/bat mitzvah play in contemporary Jewish…

  7. On the Relation between Spector's Bar Recursion and Modified Bar Recursion

    DEFF Research Database (Denmark)

    Oliva, Paulo Borges

    2002-01-01

    We introduce a variant of Spector's Bar Recursion in finite types to give a realizability interpretation of the classical axiom of dependent choice allowing for the extraction of witnesses from proofs of Sigma_1 formulas in classical analysis. We also give a bar recursive definition of the fan...... functional and study the relationship of our variant of Bar Recursion with others....

  8. Novel Designs of Quantum Reversible Counters

    Science.gov (United States)

    Qi, Xuemei; Zhu, Haihong; Chen, Fulong; Zhu, Junru; Zhang, Ziyang

    2016-11-01

    Reversible logic, as an interesting and important issue, has been widely used in designing combinational and sequential circuits for low-power and high-speed computation. Though a significant number of works have been done on reversible combinational logic, the realization of reversible sequential circuit is still at premature stage. Reversible counter is not only an important part of the sequential circuit but also an essential part of the quantum circuit system. In this paper, we designed two kinds of novel reversible counters. In order to construct counter, the innovative reversible T Flip-flop Gate (TFG), T Flip-flop block (T_FF) and JK flip-flop block (JK_FF) are proposed. Based on the above blocks and some existing reversible gates, the 4-bit binary-coded decimal (BCD) counter and controlled Up/Down synchronous counter are designed. With the help of Verilog hardware description language (Verilog HDL), these counters above have been modeled and confirmed. According to the simulation results, our circuits' logic structures are validated. Compared to the existing ones in terms of quantum cost (QC), delay (DL) and garbage outputs (GBO), it can be concluded that our designs perform better than the others. There is no doubt that they can be used as a kind of important storage components to be applied in future low-power computing systems.

  9. Sound quality assessment of wood for xylophone bars.

    Science.gov (United States)

    Aramaki, Mitsuko; Baillères, Henri; Brancheriau, Loïc; Kronland-Martinet, Richard; Ystad, Sølvi

    2007-04-01

    Xylophone sounds produced by striking wooden bars with a mallet are strongly influenced by the mechanical properties of the wood species chosen by the xylophone maker. In this paper, we address the relationship between the sound quality based on the timbre attribute of impacted wooden bars and the physical parameters characterizing wood species. For this, a methodology is proposed that associates an analysis-synthesis process and a perceptual classification test. Sounds generated by impacting 59 wooden bars of different species but with the same geometry were recorded and classified by a renowned instrument maker. The sounds were further digitally processed and adjusted to the same pitch before being once again classified. The processing is based on a physical model ensuring the main characteristics of the wood are preserved during the sound transformation. Statistical analysis of both classifications showed the influence of the pitch in the xylophone maker judgement and pointed out the importance of two timbre descriptors: the frequency-dependent damping and the spectral bandwidth. These descriptors are linked with physical and anatomical characteristics of wood species, providing new clues in the choice of attractive wood species from a musical point of view.

  10. Attention and Recall of Point-of-sale Tobacco Marketing: A Mobile Eye-Tracking Pilot Study

    Directory of Open Access Journals (Sweden)

    Maansi Bansal-Travers

    2016-01-01

    Full Text Available  Introduction: As tobacco advertising restrictions have increased, the retail ‘power wall’ behind the counter is increasingly invaluable for marketing tobacco products. Objective: The primary objectives of this pilot study were 3-fold: (1 evaluate the attention paid/fixations on the area behind the cash register where tobacco advertising is concentrated and tobacco products are displayed in a real-world setting, (2 evaluate the duration (dwell-time of these fixations, and (3 evaluate the recall of advertising displayed on the tobacco power wall. Methods: Data from 13 Smokers (S and 12 Susceptible or non-daily Smokers (SS aged 180–30 from a mobile eye-tracking study. Mobile-eye tracking technology records the orientation (fixation and duration (dwell-time of visual attention. Participants were randomized to one of three purchase tasks at a convenience store: Candy bar Only (CO; N = 10, Candy bar + Specified cigarette Brand (CSB; N = 6, and Candy bar + cigarette Brand of their Choice (CBC; N = 9. A post-session survey evaluated recall of tobacco marketing. Key outcomes were fixations and dwell-time on the cigarette displays at the point-of-sale. Results: Participants spent a median time of 44 seconds during the standardized time evaluated and nearly three-quarters (72% fixated on the power wall during their purchase, regardless of smoking status (S: 77%, SS: 67% or purchase task (CO: 44%, CSB: 71%, CBC: 100%. In the post session survey, nearly all participants (96% indicated they noticed a cigarette brand and 64% were able to describe a specific part of the tobacco wall or recall a promotional offer. Conclusions: Consumers are exposed to point-of-sale tobacco marketing, regardless of smoking status. FDA should consider regulations that limit exposure to point-of-sale tobacco marketing among consumers.

  11. Adventures of a tidally induced bar

    CERN Document Server

    Lokas, E L; Debattista, V P; Valluri, M; del Pino, A; Semczuk, M; Gajda, G; Kowalczyk, K

    2014-01-01

    Using N-body simulations, we study the properties of a bar induced in a dwarf galaxy as a result of tidal interaction with the Milky Way. The dwarf is initially composed of a disk embedded in a dark matter halo and we follow its evolution on a typical orbit for 10 Gyr. It undergoes an evolution typical of tidally stirred dwarf galaxies: it loses mass, the stellar component transforms from a disk to a spheroid and the rotation of the stars is partially replaced by random motions. A tidally induced bar forms at the first pericentre passage and survives until the end of the evolution. Fourier decomposition of the distribution of stars reveals that only even modes are significant and preserve a hierarchy so that the bar mode is always the strongest. They show a characteristic profile with a maximum, similar to simulated bars forming in isolated galaxies and observed bars in real galaxies. We adopt the maximum of the bar mode as a measure of the bar strength and we estimate the bar length by comparing the density ...

  12. Tubular stabilizer bars – calculations and construction

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2011-01-01

    Full Text Available The article outlines the calculation methods for tubular stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction, selection and manufacturing of tubular stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method.

  13. Stabilizer bars: Part 1. Calculations and construction

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2010-01-01

    Full Text Available The article outlines the calculation methods for stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction and manufacturing of stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method.

  14. Stabilizer bars: Part 3. Production methods

    Directory of Open Access Journals (Sweden)

    Adam-Markus WITTEK

    2011-01-01

    Full Text Available The article outlines the methods of stabilizer bar production as well as selected issues concerning the theory of cold roll forming. A proper construction and the selection of parameters are fundamental factors influencing the selection of a suitable production process. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  15. Stabilizer bars: Part 3. Production methods

    OpenAIRE

    Adam-Markus WITTEK; Hans-Christian RICHTER; Bogusław ŁAZARZ

    2011-01-01

    The article outlines the methods of stabilizer bar production as well as selected issues concerning the theory of cold roll forming. A proper construction and the selection of parameters are fundamental factors influencing the selection of a suitable production process. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  16. Bar Study Stories. Issues in Prevention

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    This issue of "Issues in Prevention" focuses on the impact of the availability of drinks in licensed establishments, such as bars and taverns on student drinking. This issue contains the following articles: (1) Cheap Drinks at College Bars Can Escalate Student Drinking (John D. Clapp); (2) High Alcohol Outlet Density: A Problem for Campuses and…

  17. The formation of spiral arms and rings in barred galaxies

    CERN Document Server

    Romero-Gomez, M; Masdemont, J J; García-Gomez, C

    2007-01-01

    We propose a new theory to explain the formation of spiral arms and of all types of outer rings in barred galaxies. We have extended and applied the technique used in celestial mechanics to compute transfer orbits. Thus, our theory is based on the chaotic orbital motion driven by the invariant manifolds associated to the periodic orbits around the hyperbolic equilibrium points. In particular, spiral arms and outer rings are related to the presence of heteroclinic or homoclinic orbits. Thus, R1 rings are associated to the presence of heteroclinic orbits, while R1R2 rings are associated to the presence of homoclinic orbits. Spiral arms and R2 rings, however, appear when there exist neither heteroclinic nor homoclinic orbits. We examine the parameter space of three realistic, yet simple, barred galaxy models and discuss the formation of the different morphologies according to the properties of the galaxy model. The different morphologies arise from differences in the dynamical parameters of the galaxy.

  18. Connecting Global to Local Parameters in Barred Galaxy Models

    Indian Academy of Sciences (India)

    N. D. Caranicolas

    2002-09-01

    We present connections between global and local parameters in a realistic dynamical model, describing motion in a barred galaxy. Expanding the global model in the vicinity of a stable Lagrange point, we find the potential of a two-dimensional perturbed harmonic oscillator, which describes local motion near the centre of the global model. The frequencies of oscillations and the coefficients of the perturbing terms are not arbitrary but are connected to the mass, the angular rotation velocity, the scale length and the strength of the galactic bar. The local energy is also connected to the global energy. A comparison of the properties of orbits in the global and local potential is also made.

  19. Discussion on National Standard GB 6167 "Methods for Testing the Performance of Airborne Particle Counter"

    Institute of Scientific and Technical Information of China (English)

    刘俊杰; 朱能; 王君山

    2003-01-01

    Airborne particle counters are used widely to test the air cleanliness of cleanrooms. The current Chinese national standard of airborne particle counter calibration, GB6167-85, Methods for Testing the Performance of Dust Particle Counter, has kept the same for more than 10 years. It is necessary to be amended in time.This paper discusses the differences between Chinese airborne particle counter calibration procedure and other new calibration procedures in other countries, and points out the defects of current Chinese national standard.The draft of revised Chinese National Standard is also introduced. The new revised standard, Methods for Testing the Performance of Airborne Particle Counter, covers two level calibrations:primary and secondary. Primary calibration procedure includes testing 6 kinds of performances: sample airflow rate, false counting, particle size accuracy and resolution, particle counting stability, counting efficiency and particle concentration limit. Secondary calibration is a relative comparing test method to verify the counting accuracy of calibrated airborne particle counters. Finally, how to keep the calibration traceability is suggested.

  20. Dynamical evolution of two associated galactic bars

    CERN Document Server

    Garzon, F

    2014-01-01

    We study the dynamical interactions of mass systems in equilibrium under their own gravity that mutually exert and experience gravitational forces. The method we employ is to model the dynamical evolution of two isolated bars, hosted within the same galactic system, under their mutual gravitational interaction. In this study we present an analytical treatment of the secular evolution of two bars that oscillate with respect one another. Two cases of interaction, with and without geometrical deformation, are discussed. In the latter case, the bars are described as modified Jacobi ellipsoids. These triaxial systems are formed by a rotating fluid mass in gravitational equilibrium with its own rotational velocity and the gravitational field of the other bar. The governing equation for the variation of their relative angular separation is then numerically integrated, which also provides the time evolution of the geometrical parameters of the bodies. The case of rigid, non-deformable, bars produces in some cases an ...

  1. Characterization of Bars Induced by Interactions

    Directory of Open Access Journals (Sweden)

    Inma Martinez-Valpuesta

    2016-05-01

    Full Text Available Whether the formation of bars is triggered by interactions or by internal processes has been discussed for many decades. In this work, we study differences between both mechanisms by means of numerical simulations. We relate our analysis to fly-by interactions in different mass groups or clusters according to the velocity of the encounters. We find that once the bar is created, the interaction does not much affect its evolution. We also find that bars can be triggered purely by a slow interaction. Those bars affected or triggered by interaction stay for a longer time in the slow regime, i.e., the corotation radius is more than 1.4 times the bar radius.

  2. A COMPLETE THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE BAR-BAR TENSILE IMPACT APPARATUS

    Institute of Scientific and Technical Information of China (English)

    万华培; 汪洋; 夏源明

    2003-01-01

    A complete three-dimensional FEM model of the Bar-Bar Tensile Impact Apparatus (BTIA) is constructed, in which the slots in the bars and the glue layers between the bars and the flat-shaped specimen are included. For elastic-plastic specimen material, Ly12cz aluminum alloy, the process of tensile impact experiments is simulated and the matching relation between the specimen geometry and the bars is investigated. Based on the FEM analysis, an iterative method is proposed to design a reasonable specimen geometry for obtaining the true dynamic stress-strain relation for a certain specimen material.

  3. Recent CKM and CP Results from BaBar

    CERN Document Server

    ,

    2011-01-01

    We present recent results of B and charm decays from the BaBar experiment. These results include searches for rare or forbidden charm decays, measurements of $|V_{ub}|$ from inclusive ${\\bar B} \\rightarrow X_u l {\\bar \

  4. Detecting the Elusive Blazar Counter-Jets

    CERN Document Server

    Liodakis, I; Angelakis, E

    2016-01-01

    Detection of blazar pc scale counter-jets is difficult, but it can provide invaluable insight into the relativistic effects, radiative processes and the complex mechanisms of jet production, collimation and accelation in blazars. We build on recent populations models (optimized using the MOJAVE apparent velocity and redshift distributions) in order to derive the distribution of jet-to-counter-jet ratios and the flux densities of the counter-jet at different frequencies, in an effort to set minimum sensitivity limits required for existing and future telescope arrays in order to detect these elusive counter-jets. We find that: for the BL Lacs $5\\%$ of their counter-jets have a flux-density higher than 100mJy, $15\\%$ are higher than 10 mJy, and $32\\%$ have higher flux-density than 1 mJy, whereas for the FSRQs $8\\%$ have a flux-density higher than 10mJy, $17\\%$ are higher than 1 mJy, and $32\\%$ are higher than 0.1 mJy (at 15 GHz). Future telescopes like the SKA and newly operating like e-MERLIN and JVLA may detec...

  5. Physicochemical Evaluation of Flaxseed-Date Bar

    Directory of Open Access Journals (Sweden)

    Maimuna Sultana Mohd. Ateequddin

    2015-09-01

    Full Text Available The objective of this study was to develop a flaxseed-date-bar fortified high level of dietary fibre by using functional ingredients. Formulations were developed containing 0, 5, 10, 15 and 20 grams of flaxseed flour. Flaxseed- date bar were evaluated for their, Physic-chemical properties. In the physical evaluation of bar it was found that flaxseed flour increase the hardness from 1076.82g to 1403.12g.The results revealed that the bar containing nuts and oilseeds shows maximum protein content (10.09 percent, dietary fibre content (9.89 percent, and ash content(2.90 percent was found in flaxseed-date bar. The gross energy of the flaxseed-date bar was in the range of 353.75 kcal to 377.08 kcal .The maximum gross energy was recorded by following sample A4were as the minimum was obtained by A0. The result revealed that flaxseed-dates along with nuts can be useful to prepare flaxseed-date bars of good sensory and nutritional value which provide substantial amount of carbohydrates, proteins, fats and dietary fibre.

  6. Do Bars Drive Spiral Density Waves?

    CERN Document Server

    Buta, R J; Elmegreen, B G; Salo, H; Laurikainen, E; Elmegreen, D M; Puerari, I; Block, D L

    2009-01-01

    We present deep near-infrared K_s-band AAT IRIS2 observations of a selected sample of nearby barred spiral galaxies, including some with the strongest known bars. The sample covers a range of Hubble types from SB0- to SBc. The goal is to determine if the torque strengths of the spirals correlate with those of the bars, which might be expected if the bars actually drive the spirals as has been predicted by theoretical studies. This issue has implications for interpreting bar and spiral fractions at high redshift. Analysis of previous samples suggested that such a correlation exists in the near-infrared, where effects of extinction and star formation are less important. However, the earlier samples had only a few excessively strong bars. Our new sample largely confirms our previous studies, but still any correlation is relatively weak. We find two galaxies, NGC 7513 and UGC 10862, where there is a only a weak spiral in the presence of a very strong bar. We suggest that some spirals probably are driven by their ...

  7. Analysis on plastic properties of reactive powder concrete continuous beams reinforced with GFRP bars

    Institute of Scientific and Technical Information of China (English)

    LU Shan-shan; ZHENG Wen-zhong

    2010-01-01

    To study the plastic properties of reactive powder concrete continuous beams reinforced with GFRP bars,the calculation programs for moment redistribution coefficients are prepared by using nonlinear analysis methods such as moment-curvature,conjugate beam method and so on.By comparing the test results of existed FRP bars reinforced concrete continuous beams with simulation results,the accuracy of the calculation program is verified.Then 18 simulated GFRP bars reinforced reactive powder concrete continuous beams are selected whose change parameters are reinforcement ratio of mid-span and middle support.Through the nonlinear analysis of simulated beams,moment redistribution coefficients under mid-span concentrated loads,one-third point loads and uniformly distributed loads are obtained respectively.Thus the formula of moment redistribution coefficients is obtained by fitting moment redistribution coefficients and factors.The results show that the reactive powder concrete continuous beams reinforced with GFRP bars have good plastic properties.

  8. Tidally Induced Bars of Galaxies in Clusters

    Science.gov (United States)

    Łokas, Ewa L.; Ebrová, Ivana; del Pino, Andrés; Sybilska, Agnieszka; Athanassoula, E.; Semczuk, Marcin; Gajda, Grzegorz; Fouquet, Sylvain

    2016-08-01

    Using N-body simulations, we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and a Navarro-Frenk-White dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case, we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger and longer, and have lower pattern speeds for tighter orbits. Only for the tightest orbit are the properties of the bar controlled by the orientation of the tidal torque from the cluster at pericenter. The mechanism behind the formation of the bars is the angular momentum transfer from the galaxy stellar component to its halo. All of the bars undergo extended periods of buckling instability that occur earlier and lead to more pronounced boxy/peanut shapes when the tidal forces are stronger. Using all simulation outputs of galaxies at different evolutionary stages, we construct a toy model of the galaxy population in the cluster and measure the average bar strength and bar fraction as a function of clustercentric radius. Both are found to be mildly decreasing functions of radius. We conclude that tidal forces can trigger bar formation in cluster cores, but not in the outskirts, and thus can cause larger concentrations of barred galaxies toward the cluster center.

  9. Game Theory, Adaptation, and Genetic Programming: Some Perspectives on Operations Research for Counter-IED

    Science.gov (United States)

    2011-06-01

    memes” ( Dawkins , 1989; Gabora, 1995; Boal & Schultz, 2007). As Weeks & Galunic (2003) point out: “Memes are the replicators in cultural evolution...Books. Dawkins , R. (1989), The Selfish Gene, 2 nd ed., Oxford University Press. Dekker, A.H. (2010), “Agent-Based Simulation for Counter-IED: A

  10. Cooperation and retaliation in collective good games : Does counter-punishment really destroy cooperation?

    NARCIS (Netherlands)

    Bakker, Dieko; Dijkstra, Jacob; Flache, Andreas

    2015-01-01

    Previous research has pointed to the potential of counter-punishment opportunities to undermine the positive effects of ‘altruistic punishment’ on cooperation in collective good games. These studies may have excluded important aspects of punishment in real life settings, notably the ambiguity whethe

  11. First Measurement of σ(gg → t$\\bar{t}$)/σ(p$\\bar{p}$ → t$\\bar{t}$)

    Energy Technology Data Exchange (ETDEWEB)

    Alamdari, Shabnaz Pashapour [Univ. of Toronto, ON (Canada)

    2008-01-01

    The work presented here is the first measurement of the fraction of top quark pair production through gluon-gluon fusion. We use an integrated luminosity of 0.96 ± 0.06 fb-1 of p{bar p} collisions at √s of 1.96 TeV collected by the CDF II detector. We select t$\\bar{t}$ candidates by identifying a high-pT lepton candidate, a large missing ET as evidence for a neutrino candidate and at least four high ET jets, one of which has to be identified as originating from a b quark. The challenge is to discriminate between the two production processes with the identical final state, gg → t$\\bar{t}$ and q$\\bar{p}$ → t$\\bar{t}$. We take advantage of the fact that compared to a quark, a gluon is more likely to radiate a low momentum gluon and therefore, one expects a larger number of charged particles with low pT in a process involving more gluons. Given the large uncertainties associated with the modeling of the low pT charged particle multiplicity, a data-driven technique was employed. Using calibration data samples, we show there exists a clear correlation between the observed average number of low pT charged particles and the average number of gluons involved in the production process predicted by Monte Carlo calculations. Given the correlation, one can identify low pT charged particle multiplicity distributions associated with specific average number of gluons. The W + 0 jet sample and dijets sample with leading jet ET in the range of 80-100 GeV are used to find no-gluon and gluon-rich low p{sub T} charged particle multiplicity distributions, respectively. Using these no-gluon and gluon-rich distributions in a likelihood fit, we find the fraction of gluon-rich events in t{bar t} candidates. This fraction has contributions from the signal and background events. Taking into account these contributions and the gg → t$\\bar{t}$ and q$\\bar{q}$ → t$\\bar

  12. Development of an effective pinch bar

    CSIR Research Space (South Africa)

    Ottermann, RW

    2003-02-01

    Full Text Available Length (m) Total Mass (kg) Mass (kg) for clamped length (2,6m) Deflection (25kg load @ clamped length) (mm) Bending / Breaking load (kg) Lightweight (extruded tube) 3.5 2.6 4 3.3 930 35 Manufactured Fibreglass tube 3.2 2.6 8.5 7.1 205... the stiffness of the XDM pinch bar with the extruded fibreglass tube bar is lower than that of the steel pinch bar the bending/braking strength is the same as the mode of failure for both is the bending of the steel tips. 14 3.4 Design review During...

  13. Neutron spectroscopy with the Spherical Proportional Counter

    CERN Document Server

    Bougamont, E; Derre, J; Galan, J; Gerbier, G; Giomataris, I; Gros, M; Katsioulas, I; Jourde, D; Magnier, P; Navick, X F; Papaevangelou, T; Savvidis, I; Tsiledakis, G

    2015-01-01

    A novel large volume spherical proportional counter, recently developed, is used for neutron measurements. Gas mixtures of $N_{2}$ with $C_{2}H_{6}$ and pure $N_{2}$ are studied for thermal and fast neutron detection, providing a new way for the neutron spectroscopy. The neutrons are detected via the ${}^{14}N(n, p)C^{14}$ and ${}^{14}N(n, \\alpha)B^{11}$ reactions. Here we provide studies of the optimum gas mixture, the gas pressure and the most appropriate high voltage supply on the sensor of the detector in order to achieve the maximum amplification and better resolution. The detector is tested for thermal and fast neutrons detection with a ${}^{252}Cf$ and a ${}^{241}Am-{}^{9}Be$ neutron source. The atmospheric neutrons are successfully measured from thermal up to several MeV, well separated from the cosmic ray background. A comparison of the spherical proportional counter with the current available neutron counters is also given.

  14. Exploratory flexural power flow measurements on a bar

    Science.gov (United States)

    Vanderwal, H. M. M.

    1990-05-01

    Exploratory experiments in a bar with an absorptive termination were performed. The bar was excited in a transversal direction. The flexural power flow in the bar was measured at various positions, applying the two transducer technique (2TT) and the four transducer technique (4TT). The separation distance between the accelerometers was varied. The power flow at the excitation point was determined from a force and an acceleration measurement (Fv). When comparing the 2TT power flow with the 4TT or Fv power flow, the discretization error (i.e. the error due to a finite accelerometer separation) is an important parameter, particularly for separations larger than one sixth of a wavelength. In order to quantify the effect of this error, a prediction of the measured power flows on the basis of an analytical solution of the bending wave equation for the far field is performed. For most cases a good agreement is found between the predicted and the measured power flow ratios (i.e. 4TT/2TT and 2TT/Fv). However, for accelerometer separations smaller than about one sixth of a wavelength, a larger scatter is observed in the power flow data, measured with the 4TT, due to loss of significant digits. This effect may result in limitations for multiple transducer techniques in two or three dimensional structures.

  15. Possible $D\\bar{D}$ and $B\\bar{B}$ Molecular states in a chiral quark model

    CERN Document Server

    Li, M T; Dong, Y B; Zhang, Z Y

    2012-01-01

    We perform a systematic study of the bound state problem of $D\\bar{D}$ and $B\\bar{B}$ systems by using effective interaction in our chiral quark model. Our results show that both the interactions of $D\\bar{D}$ and $B\\bar{B}$ states are attractive, which consequently result in $I^G(J^{PC})=0^+(0^{++})$ $D\\bar{D}$ and $B\\bar{B}$ bound states.

  16. Arrangement to control the roof bar depending on a sliding bar. Einrichtung zur Steuerung einer Hangendkappe in Abhaengigkeit einer Schiebekappe

    Energy Technology Data Exchange (ETDEWEB)

    Weirich, W.; Dettmers, M.

    1984-04-12

    The invention is concerned with an arrangement to control an underground powered support unit the roof bar of which is furnished with a regulating bar. The regulating cylinder of the regulating bar is hydraulically coupled with the sliding cylinder of the sliding bar in such a way that on pulling of the sliding bar the pressing pressure of the roof bar to the roof is reduced automatically to a level which can be preset. (orig.).

  17. The AMS-01 Aerogel Threshold Cherenkov counter

    CERN Document Server

    Barancourt, D; Barbier, G; Barreira, G; Buénerd, M; Castellini, G; Choumilov, E; Favier, Jean; Fouque, N; Gougas, Andreas; Hermel, V; Kossakowski, R; Laborie, G; Laurenti, G; Lee, S C; Mayet, F; Meillon, B; Oyang, J Y T; Plyaskin, V; Pozhidaev, V; Rossin, C; Santos, D; Vezzu, F; Vialle, J P

    2001-01-01

    The Alpha Magnetic Spectrometer in a precursor version (AMS-01), was flown in June 1998 on a 51.6 degrees orbit and at altitudes ranging between 320 and 390 km, on board of the space shuttle Discovery (flight STS-91). AMS-01 included an Aerogel Threshold Cherenkov counter (ATC) to separate antiprotons from electrons and positrons from protons, for momenta below 3.5 GeV/c. This paper presents a description of the ATC counter and reports on its performances during the flight STS-91.

  18. Analysis of counter-rotating wind turbines

    DEFF Research Database (Denmark)

    Shen, Wen Zhong; Zakkam, Vinod Arun Kumar; Sørensen, Jens Nørkær

    2007-01-01

    This paper presents a study on the performance of a wind turbine with two counter-rotating (CRWT) rotors. The characteristics of the two counter-rotating rotors are on a 3-bladed Nordtank 500 kW rotor. The analysis has been carried out by using an Actuator Line technique implemented in the Navier......-Stokes code EllipSys3D. The analysis shows that the Annual Energy Production can be increased to about 43.5 %, as compared to a wind turbine with a single rotor. In order to determine the optimal settings of the CRWT turbine, parameters such as distance between two rotors and rotational speed have been...

  19. Development of DUPIC safeguards neutron counter

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Gil; Cha, Hong Ryul; Kim, Ho Dong; Hong, Jong Sook; Kang, Hee Young

    1999-08-01

    KAERI, in cooperation with LANL, developed DSNC (DUPIC Safeguards Neutron Counter) for safeguards implementing on DUPIC process which is under development by KAERI for direct use of spent PWR fuel in CANDU reactors. DSNC is a well-type neutron coincidence counter with substantial shielding to protect system from high gamma radiation of spent fuel. General development procedures in terms of design, manufacturing, fabrication, cold and hot test, performance test for DSNC authentication by KAERI-IAEA-LANL are described in this report. It is expected that the techniques related DSNC development and associated neutron detection and evaluation method could be applied for safeguards improvement. (Author). 20 refs., 16 tabs. 98 figs.

  20. Development of DUPIC safeguards neutron counter

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Gil; Cha, Hong Ryul; Kim, Ho Dong; Hong, Jong Sook; Kang, Hee Young

    1999-08-01

    KAERI, in cooperation with LANL, developed DSNC (DUPIC Safeguards Neutron Counter) for safeguards implementing on DUPIC process which is under development by KAERI for direct use of spent PWR fuel in CANDU reactors. DSNC is a well-type neutron coincidence counter with substantial shielding to protect system from high gamma radiation of spent fuel. General development procedures in terms of design, manufacturing, fabrication, cold and hot test, performance test for DSNC authentication by KAERI-IAEA-LANL are described in this report. It is expected that the techniques related DSNC development and associated neutron detection and evaluation method could be applied for safeguards improvement. (Author). 20 refs., 16 tabs. 98 figs.

  1. Measurement of the B0bar Lifetime and the B0B0bar Oscillation Frequency Using Partially Reconstructed B0bar --> D*+ ell- nu-bar Decays

    CERN Document Server

    Aubert, B; Abrams, G S; Adye, T; Ahmed, M; Ahmed, S; Alam, M S; Albert, J; Aleksan, Roy; Allen, M T; Allison, J; Allmendinger, T; Altenburg, D; Andreassen, R; Andreotti, M; Angelini, C; Anulli, F; Arnaud, N; Aston, D; Azzolini, V; Baak, M; Back, J J; Bailey, S; Baldini-Ferroli, R; Band, H R; Banerjee, Sw; Barate, R; Bard, D J; Barlow, N R; Barlow, R J; Barrett, M; Bartoldus, R; Batignani, G; Battaglia, M; Bauer, J M; Beck, T W; Behera, P K; Bellini, F; Benayoun, M; Benelli, G; Berger, N; Bernard, D; Berryhill, J W; Best, D; Bettarini, S; Bettoni, D; Bevan, A J; Bhimji, W; Bhuyan, B; Bianchi, F; Biasini, M; Biesiada, J; Blanc, F; Blaylock, G; Blinov, A E; Blinov, V E; Bloom, P; Bomben, M; Bóna, M; Bondioli, M; Bonneaud, G R; Bosisio, L; Boutigny, D; Bowerman, D A; Boyarski, A M; Boyd, J T; Bozzi, C; Brandenburg, G; Brandt, T; Brau, J E; Breon, A B; Briand, H; Brose, J; Brown, C L; Brown, C M; Brown, D N; Bruinsma, M; Brunet, S; Bucci, F; Buchanan, C; Buchmüller, O L; Bugg, W; Bukin, A D; Bulten, H; Burchat, P R; Burke, J P; Button-Shafer, J; Buzzo, A; Côté, D; Cahn, R N; Calabrese, R; Calcaterra, A; Calderini, G; Campagnari, C; Capra, R; Carpinelli, M; Cartaro, C; Cavoto, G; Cenci, R; Chaisanguanthum, K S; Chao, M; Charles, E; Charles, M J; Chauveau, J; Chavez, C A; Chen, A; Chen, C; Chen, E; Chen, J C; Chen, S; Chen, X; Cheng, B; Cheng, C H; Chevalier, N; Cibinetto, G; Clark, P J; Claus, R; Cochran, J; Coleman, J P; Contri, R; Convery, M R; Cormack, C M; Cossutti, F; Cottingham, W N; Couderc, F; Covarelli, R; Cowan, G; Cowan, R; Crawley, H B; Cremaldi, L; Cristinziani, M; Çuhadar-Dönszelmann, T; Cunha, A; D'Orazio, A; Dahmes, B; Dallapiccola, C; Danielson, N; Dasu, S; Datta, M; Dauncey, P D; David, P; Davier, M; Davis, D BrownC L; Day, C T; De Groot, N; De Nardo, N; Cavallo, G; Del Buono, L; Della Ricca, G; Di Lodovico, F; Di Marco, E; Dickopp, M; Dingfelder, J C; Dittongo, S; Dong, D; Dorfan, J; Dorigo, A; Druzhinin, V P; Dubitzky, R S; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Dvoretskii, A; Eckhart, E A; Eckmann, R; Edwards, A J; Egede, U; Eichenbaum, A M; Eigen, G; Eisner, A M; Elmer, P; Emery, S; Ernst, J A; Eschenburg, V; Eschrich, I; Eyges, V; Faccini, R; Fan, S; Farbin, A; Feltresi, E; Ferrarotto, F; Ferroni, F; Field, R C; Finocchiaro, G; Flacco, C J; Flack, R L; Flächer, H U; Flood, K T; Ford, K E; Ford, W T; Forster, I J; Forti, F; Fortin, D; Foulkes, S D; Franek, B; Frey, R; Fritsch, M; Fry, J R; Fulsom, B G; Gabathuler, E; Gaidot, A; Gaillard, J R; Galeazzi, F; Gallo, F; Gamba, D; Gamet, R; Gan, K K; Ganzhur, S F; Gary, J W; Gaspero, M; Gatto, F; Fabozzi, C; George, K A; Gill, M S; Giorgi, M A; Giraud, P F; Giroux, X; Gladney, L; Glanzman, T; Godang, R; Goetzen, K; Golubev, V B; Gopal, G P; Gowdy, S J; Gradl, W; Graham, M; Grancagnolo, S; Graugès-Pous, E; Graziani, G; Green, M G; Grenier, P; Gritsan, A V; Grosdidier, G; Groysman, Y; Guo, Q H; Hadavand, H K; Hadig, T; Haire, M; Halyo, V; Hamano, K; Hamel de Monchenault, G; Hamon, O; Harrison, P F; Harrison, T J; Hart, A J; Hartfiel, B L; Hast, C; Hauke, A; Hawkes, C M; Hearty, C; Held, T; Hertzbach, S S; Heusch, C A; Hill, E J; Hitlin, D G; Höcker, A; Hodgkinson, M C; Hollar, J J; Hong, T M; Honscheid, K; Hopkins, D A; Hrynóva, T; Hufnagel, D; Hulsbergen, W D; Hutchcroft, D E; Igonkina, O; Innes, W R; Izen, J M; Jackson, P D; Jackson, P S; Jacobsen, R G; Jawahery, A; Jayatilleke, S M; John, M J J; Johnson, J R; Judd, D; Kadel, R W; Kadyk, J; Kagan, H; Karyotakis, Yu; Kass, R; Kelly, M P; Kelsey, M H; Kerth, L T; Khan, A; Kim, H; Kim, P; Kirkby, D; Kitayama, I; Klose, V; Knecht, N S; Koch, H; Kocian, M L; Koeneke, K; Kofler, R; Kolomensky, Yu G; Koptchev, V B; Kovalskyi, D; Kowalewski, R V; Kozanecki, Witold; Kravchenko, E A; Krishnamurthy, M; Kroeger, R; Kroseberg, J; Kukartsev, G; Kutter, P E; Kyberd, P; Lacker, H M; Lae, C K; Lafferty, G D; Lanceri, L; Lange, D J; Langenegger, U; Lankford, A J; Latham, T E; Lau, Y P; Lazzaro, A; Le Diberder, F R; Lees, J P; Legendre, M; Leith, D W G S; Lepeltier, V; Leruste, P; Levesque, J A; Lewandowski, B; Li Gioi, L; Li, H; Li, X; Libby, J; Lillard, V; Lista, L; Liu, R; Lo Secco, C P; Jessop, J M; Lo Vetere, M; Lockman, W S; Lombardo, V; London, G W; Long, O; Lou, X C; Lü, C; Lu, M; Luitz, S; Luppi, E; Lusiani, A; Lüth, V; Lutz, A M; Lynch, G; Lynch, H L; MacFarlane, D B; Macri, M; Mader, W F; Majewski, S A; Malcles, J; Mallik, U; Mancinelli, G; Mandelkern, M A; Marchiori, G; Margoni, M; Marks, J; Marsiske, H; Martínez-Vidal, F; Mattison, T S; Mayer, B; Mazur, M A; Mazzoni, M A; McKenna, J A; McMahon, T R; Meadows, B T; Mellado, B; Messner, R; Meyer, W T; Mihályi, A; Mir, L M; Mohanty, G B; Mohapatra, A K; Mommsen, R K; Monge, M R; Monorchio, D; Moore, T B; Morandin, M; Morgan, S E; Morganti, M; Morganti, S; Morii, M; Morton, G W; Muheim, F; Müller, D R; Naisbit, M T; Narsky, I; Nash, J A; Nauenberg, U; Nd, 14 40; Neal, H; Negrini, M; Neri, N; Nesom, G; Nicholson, H; Nikolich, M B; Nogowski, R; O'Grady, C P; Ocariz, J; Oddone, P J; Ofte, I; Olaiya, E O; Olivas, A; Olsen, J; Onuchin, A P; Orimoto, T J; Otto, S; Oyanguren, A; Ozcan, V E; Paar, H P; Pacetti, S; Palano, A; Palombo, F; Pan, Y; Panetta, J; Panvini, R S; Paoloni, E; Paolucci, P; Pappagallo, M; Parry, R J; Passaggio, S; Patel, P M; Patrignani, C; Patteri, P; Payne, D J; Pelizaeus, M; Perazzo, A; Perl, M; Peters, K; Petersen, B A; Petersen, T C; Petzold, A; Piatenko, T; Piccolo, D; Piccolo, I M; Peruzzi, M; Piemontese, L; Pierini, M; Pioppi, M; Piredda, G; Plaszczynski, S; Playfer, S; Poireau, V; Polci, F; Pompili, A; Porter, F C; Posocco, M; Potter, C T; Prell, S; Prepost, R; Pripstein, M; Pulliam, T; Purohit, M V; Qi, N D; Rahatlou, S; Rahimi, A M; Rama, M; Rankin, P; Ratcliff, B N; Raven, G; Reidy, J; Ricciardi, S; Richman, J D; Ritchie, J L; Rizzo, G; Roat, C; Roberts, D A; Robertson, S H; Robutti, E; Rodier, S; Roe, N A; Röthel, W; Ronan, M T; Roney, J M; Rong, G; Roodman, A; Roos, L; Rosenberg, E I; Rotondo, M; Roudeau, P; Rubin, A E; Ruddick, W O; Ryd, A; Sacco, R; Saeed, M A; Safai-Tehrani, F; Saleem, M; Salnikov, A A; Salvatore, F; Samuel, A; Sanders, D A; Santroni, A; Saremi, S; Satpathy, A; Schalk, T; Schenk, S; Schindler, R H; Schofield, K C; Schott, G; Schrenk, S; Schröder, H; Schröder, T; Schubert, J; Schubert, K R; Schumm, B A; Schune, M H; Schwiening, J; Schwierz, R; Schwitters, R F; Sciacca, C; Sciolla, G; Seiden, A; Sekula, S J; Serednyakov, S I; Sharma, V; Shen, B C; Simani, M C; Simi, G; Simonetto, F; Sinev, N B; Skovpen, Yu I; Smith, A J S; Smith, J G; Snoek, H L; Snyder, A; Sobie, R J; Soffer, A; Sokoloff, M D; Solodov, E P; Spaan, B; Spanier, S M; Spitznagel, M; Spradlin, P; Stängle, H; Steinke, M; Stelzer, J; Stocchi, A; Stoker, D P; Stroili, R; Strom, D; Strube, J; Stugu, B; Su, D; Sullivan, M K; Summers, D J; Sundermann, J E; Suzuki, K; Swain, S; Tan, P; Taras, P; Taylor, F; Taylor, G P; Telnov, A V; Teodorescu, L; Ter-Antonian, R; Therin, G; Thiebaux, C; Thompson, J M; Tisserand, V; Toki, W H; Torrence, E; Tosi, S; Touramanis, C; Ulmer, K A; Uwer, U; Vasileiadis, G; Vasseur, G; Vavra, J; Vazquez, W P; Verderi, M; Verkerke, W; Viaud, B; Vitale, L; Voci, C; Voena, C; Wagner, G; Wagner, S R; Wagoner, D E; Waldi, R; Walsh, J; Wang, K; Wang, P; Wappler, F R; Watson, A T; Weaver, M; Weidemann, A W; Weinstein, A J R; Wenzel, W A; Wilden, L; Williams, D C; Williams, J C; Willocq, S; Wilson, F F; Wilson, J R; Wilson, M G; Wilson, R J; Wisniewski, W J; Wittgen, M; Won, E; Wong, Q K; Wormser, G; Wright, D H; Wright, D M; Wu, J; Wu, S L; Xie, Y; Yamamoto, R K; Yarritu, A K; Ye, S; Yéche, C; Yi, J; Yi, K; Young, C C; Yu, Z; Yumiceva, F X; Yushkov, A N; Zain, S B; Zallo, A; Zeng, Q; Zghiche, A; Zhang, J; Zhang, L; Zhao, H W; Zhu, Y S; Zito, M; De Sangro, R; Del Re, D; La Vaissière, C de; Von Wimmersperg-Töller, J H

    2006-01-01

    We present a simultaneous measurement of the B0bar lifetime tau_B0 and B0B0bar oscillation frequency Delta_md. We use a sample of about 50000 partially reconstructed B0bar --> D*+ ell- nu-bar decays identified with the BABAR detector at the PEP-II e+e- storage ring at SLAC. The flavor of the other B meson in the event is determined from the charge of another high-momentum lepton. The results are tau_B0 = (1.504 +/- 0.013 (stat) {+0.018}/{-0.013} (syst)) ps, Delta_md = (0.511 +/- 0.007 (stat) {+0.007}/{-0.006} (syst)) ps-1

  2. Field observations of nearshore bar formation

    DEFF Research Database (Denmark)

    Aagaard, Troels; Kroon, Aart; Greenwood, Brian

    2008-01-01

      The formation of an inner nearshore bar was observed during a high-energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics...... and sediment fluxes were obtained from electromagnetic current meters and optical backscatter sensors. These process measurements showed that a divergence in sediment transport occurred at the location of the developing trough, and observed gradients in cross-shore net sediment flux were consistent...... with the morphological development. The main cause for the flux gradients were cross-shore gradients in offshore-directed mean current (undertow) speed which depended upon local relative wave height and local bed slope....

  3. Barring intervention? Lesbian and gay bars as an underutilized venue for tobacco interventions.

    Science.gov (United States)

    Leibel, Katherine; Lee, Joseph G L; Goldstein, Adam O; Ranney, Leah M

    2011-07-01

    Lesbian, gay, bisexual, and transgender (LGBT) communities are at high risk for tobacco use. While LGBT communities have historically considered bars to be safe places to socialize and congregate, these spaces are often tobacco-friendly environments and may have potential as sites for much needed intervention. Only a few public health interventions have attempted to work through bars and clubs to decrease tobacco use in the LGBT populations. Evidence from HIV prevention suggests some potential interventions in bars, and the tobacco industry has worked extensively (and successfully) to utilize bars in marketing efforts. Lesbian and gay bars are underutilized in tobacco control, suggesting missed avenues for chronic disease prevention programs. Researchers and communities should continue to recognize the importance of clean indoor air laws covering bars and develop additional strategies for reaching LGBT populations with disparities.

  4. Intelligent Bar Chart Plagiarism Detection in Documents

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts. PMID:25309952

  5. Intelligent bar chart plagiarism detection in documents.

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Rehman, Amjad; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

  6. Bar pattern speeds in CALIFA galaxies. I. Fast bars across the Hubble sequence

    Science.gov (United States)

    Aguerri, J. A. L.; Méndez-Abreu, J.; Falcón-Barroso, J.; Amorin, A.; Barrera-Ballesteros, J.; Cid Fernandes, R.; García-Benito, R.; García-Lorenzo, B.; González Delgado, R. M.; Husemann, B.; Kalinova, V.; Lyubenova, M.; Marino, R. A.; Márquez, I.; Mast, D.; Pérez, E.; Sánchez, S. F.; van de Ven, G.; Walcher, C. J.; Backsmann, N.; Cortijo-Ferrero, C.; Bland-Hawthorn, J.; del Olmo, A.; Iglesias-Páramo, J.; Pérez, I.; Sánchez-Blázquez, P.; Wisotzki, L.; Ziegler, B.

    2015-04-01

    Context. The bar pattern speed (Ωb) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring Ωb. The non-parametric method proposed by Tremaine & Weinberg (1984, ApJ, 282, L5; TW) and based on stellar kinematics is the most accurate. This method has been applied so far to 17 galaxies, most of them SB0 and SBa types. Aims: We have applied the TW method to a new sample of 15 strong and bright barred galaxies, spanning a wide range of morphological types from SB0 to SBbc. Combining our analysis with previous studies, we investigate 32 barred galaxies with their pattern speed measured by the TW method. The resulting total sample of barred galaxies allows us to study the dependence of Ωb on galaxy properties, such as the Hubble type. Methods: We measured Ωb using the TW method on the stellar velocity maps provided by the integral-field spectroscopy data from the CALIFA survey. Integral-field data solve the problems that long-slit data present when applying the TW method, resulting in the determination of more accurate Ωb. In addition, we have also derived the ratio ℛ of the corotation radius to the bar length of the galaxies. According to this parameter, bars can be classified as fast (ℛ 1.4). Results: For all the galaxies, ℛ is compatible within the errors with fast bars. We cannot rule out (at 95% level) the fast bar solution for any galaxy. We have not observed any significant trend between ℛ and the galaxy morphological type. Conclusions: Our results indicate that independent of the Hubble type, bars have been formed and then evolve as fast rotators. This observational result will constrain the scenarios of formation and evolution of bars proposed by numerical simulations.

  7. Upaya Perumusan Prinsip Counter Accounting Melalui Filosofi Punk Sebagai Counter Culture

    Directory of Open Access Journals (Sweden)

    Dayno Utama

    2015-12-01

    Full Text Available The aim of this research is to demonstrate that resistance to mainstream research contained in top/elite accounting journals for sparking creativity and innovation unconsciously has utilized the philosophy of punk. The research method of this research is argumentation technique. The result of this research shows that the philosophy of punk as counter culture can be utilized for accounting research through formulation the accounting principles namely counter accounting. Creative and innovative accounting as forms of counter accounting towards mainstream accounting tradition especially in elite journals, will not pervade in a short time.

  8. Hot Disks And Delayed Bar Formation

    CERN Document Server

    Sheth, Kartik; Elmegreen, Debra Meloy; Elmegreen, Bruce G; Athanassoula, E; Weiner, Ben

    2012-01-01

    We present observational evidence for the inhibition of bar formation in dispersion-dominated (dynamically hot) galaxies by studying the relationship between galactic structure and host galaxy kinematics in a sample of 257 galaxies between 0.1 $<$ z $\\leq$ 0.84 from the All-Wavelength Extended Groth Strip International Survey (AEGIS) and the Deep Extragalactic Evolutionary Probe 2 (DEEP2) survey. We find that bars are preferentially found in galaxies that are massive and dynamically cold (rotation-dominated) and on the stellar Tully-Fisher relationship, as is the case for barred spirals in the local Universe. The data provide at least one explanation for the steep ($\\times$3) decline in the overall bar fraction from z=0 to z=0.84 in L$^*$ and brighter disks seen in previous studies. The decline in the bar fraction at high redshift is almost exclusively in the lower mass (10 $<$ log M$_{*}$(\\Msun)$<$ 11), later-type and bluer galaxies. A proposed explanation for this "downsizing" of the bar formation ...

  9. Preparation of a Breadfruit Flour Bar.

    Science.gov (United States)

    Nochera, Carmen L; Ragone, Diane

    2016-05-20

    Breadfruit is a nutritious, high energy food with a low quantity of protein but excellent protein quality. It has the potential to be developed into desired products which will help increase its utilization and add value to the crop. The overall purposes of this investigation were to develop a portable, nutritious, ready-to-eat breadfruit product (bar), test the sensory qualities of the product, and evaluate the nutritional properties of the product. Flour made from the Micronesian variety, Meinpadahk (Artocarpus altilis × Artocarpus mariannensis), was utilized for the development of the breadfruit bar. Breadfruit is a rich source of fiber, vitamins such as vitamin C, minerals such as potassium, and phytochemicals such as flavonoids. Nutritional labeling indicates that the breadfruit bar is high in carbohydrates and low in fat, and sensory evaluation indicates that 81% of the panelists found the bar acceptable while 19% disliked the bar. The breadfruit bar can provide an appealing and inexpensive gluten-free food source based on locally available breadfruit.

  10. Preparation of a Breadfruit Flour Bar

    Directory of Open Access Journals (Sweden)

    Carmen L. Nochera

    2016-05-01

    Full Text Available Breadfruit is a nutritious, high energy food with a low quantity of protein but excellent protein quality. It has the potential to be developed into desired products which will help increase its utilization and add value to the crop. The overall purposes of this investigation were to develop a portable, nutritious, ready-to-eat breadfruit product (bar, test the sensory qualities of the product, and evaluate the nutritional properties of the product. Flour made from the Micronesian variety, Meinpadahk (Artocarpus altilis × Artocarpus mariannensis, was utilized for the development of the breadfruit bar. Breadfruit is a rich source of fiber, vitamins such as vitamin C, minerals such as potassium, and phytochemicals such as flavonoids. Nutritional labeling indicates that the breadfruit bar is high in carbohydrates and low in fat, and sensory evaluation indicates that 81% of the panelists found the bar acceptable while 19% disliked the bar. The breadfruit bar can provide an appealing and inexpensive gluten-free food source based on locally available breadfruit.

  11. Possible Signatures of New Physics in e+e- and bar bar{p}p Collisions

    Science.gov (United States)

    Senju, H.

    1998-12-01

    A preon model with preonic charge predicts many unique new particles. Among them, several are expected to be relatively light, including the fermion lS, which is a stable WIMP, bosons U0 and U+ and the lepto-quark fermion q'. The production of these particles in e+e- and bar{p}p collisions is discussed, focusing on e+e- --> UlS(e) and bar{p}p --> bar{q}'q' + X. A signature of the latter is dilepton + 2 charm jets + missing energy. A discussion on reported unusual events in the dilepton + jets sample is made based on bar{q}'q' production.

  12. $\\bar d - \\bar u$ asymmetry in the proton in chiral effective theory

    Energy Technology Data Exchange (ETDEWEB)

    Salamu, Yusupujiang [Institute of High Energy Physics, CAS, Beijing (China); Ji, Chueng -Ryong [North Carolina State Univ., Raleigh, NC (United States); Melnitchouk, W. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Wang, P. [Institute of High Energy Physics, Beijing (China); Theoretical Physics Center for Science Facilities, CAS, Beijing (China)

    2015-03-25

    We compute the $\\bar d - \\bar u$ asymmetry in the proton in chiral effective theory, including both nucleon and Δ degrees of freedom, within both relativistic and heavy baryon frameworks. In addition to the distribution at $x>0$, we estimate the correction to the integrated asymmetry arising from zero momentum contributions from pion rainbow and bubble diagrams at $x=0$, which have not been accounted for in previous analyses. In conclusion, we find that the empirical $x$ dependence of $\\bar d - \\bar u$ as well as the integrated asymmetry can be well reproduced in terms of a transverse momentum cutoff parameter.

  13. Dynamical Calculations of bar K and MULTI-bar K Nuclei

    Science.gov (United States)

    Gazda, D.; Mareš, J.; Friedman, E.; Gal, A.

    We report on our recent calculations of bar K and multi-bar K nuclei. Calculations were performed fully self-consistently across the periodic table using the relativistic mean-field approach. We aimed at detailed analysis of dynamical processes and various thresholds that determine the K- absorption width. Further, we studied the behavior of the nuclear medium under the influence of increasing strangeness in order to search for bar K condensation precursor phenomena. Last, we explored possibly self-bound strange hadronic configurations consisting of neutrons and bar K0 mesons and studied their properties.

  14. COUNTER-ROTATION IN RELATIVISTIC MAGNETOHYDRODYNAMIC JETS

    Energy Technology Data Exchange (ETDEWEB)

    Cayatte, V.; Sauty, C. [Laboratoire Univers et Théories, Observatoire de Paris, UMR 8102 du CNRS, Université Paris Diderot, F-92190 Meudon (France); Vlahakis, N.; Tsinganos, K. [Department of Astrophysics, Astronomy and Mechanics, Faculty of Physics, University of Athens, 15784 Zografos, Athens (Greece); Matsakos, T. [Department of Astronomy and Astrophysics, The University of Chicago, Chicago, IL 60637 (United States); Lima, J. J. G., E-mail: veronique.cayatte@obspm.fr [Centro de Astrofísica, Universidade do Porto, Rua das Estrelas, 4150-762 Porto (Portugal)

    2014-06-10

    Young stellar object observations suggest that some jets rotate in the opposite direction with respect to their disk. In a recent study, Sauty et al. showed that this does not contradict the magnetocentrifugal mechanism that is believed to launch such outflows. Motion signatures that are transverse to the jet axis, in two opposite directions, have recently been measured in M87. One possible interpretation of this motion is that of counter-rotating knots. Here, we extend our previous analytical derivation of counter-rotation to relativistic jets, demonstrating that counter-rotation can indeed take place under rather general conditions. We show that both the magnetic field and a non-negligible enthalpy are necessary at the origin of counter-rotating outflows, and that the effect is associated with a transfer of energy flux from the matter to the electromagnetic field. This can be realized in three cases: if a decreasing enthalpy causes an increase of the Poynting flux, if the flow decelerates, or if strong gradients of the magnetic field are present. An illustration of the involved mechanism is given by an example of a relativistic magnetohydrodynamic jet simulation.

  15. Can counter-stereotypes boost flexible thinking?

    NARCIS (Netherlands)

    M.A. Goclowska; R.J. Crisp; K. Labuschagne

    2012-01-01

    To reduce prejudice psychologists design interventions requiring people to think of counter-stereotypes (i.e., people who defy stereotypic expectations—a strong woman, a Black President). Grounded in the idea that stereotypes constrain the ability to think flexibly, we propose that thinking of count

  16. International perspectives on countering school segregation

    NARCIS (Netherlands)

    Bakker, J.T.A.; Denessen, E.J.P.G.; Peters, T.J.M.; Walraven, G.

    2010-01-01

    School segregation is perceived as an unyielding problem worldwide, which is manifest along both ethnic and socio-economic lines. With this edited volume we aim to share information about school segregation and policies focused on countering school segregation from an international perspective. Many

  17. Counter Trafficking System Development "Analysis Training Program"

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Dennis C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2010-12-01

    This document will detail the training curriculum for the Counter-Trafficking System Development (CTSD) Analysis Modules and Lesson Plans are derived from the United States Military, Department of Energy doctrine and Lawrence Livermore National Laboratory (LLNL), Global Security (GS) S Program.

  18. Can counter-stereotypes boost flexible thinking?

    NARCIS (Netherlands)

    Goclowska, M.A.; Crisp, R.J.; Labuschagne, K.

    2013-01-01

    To reduce prejudice psychologists design interventions requiring people to think of counter-stereotypes (i.e., people who defy stereotypic expectations—a strong woman, a Black President). Grounded in the idea that stereotypes constrain the ability to think flexibly, we propose that thinking of count

  19. Cerenkov counters at the Omega Facility

    CERN Multimedia

    1975-01-01

    P. Petroff on the left. Here one sees both the gas Cerenkov counters sitting in front of the magnet to select forward emitted particles. The smaller one, working at high pressure, sits nearest to the Omega magnet (see photo 7505073X), the other (see photo 7505071X) works at atmospheric pressure.

  20. One-Counter Markov Decision Processes

    NARCIS (Netherlands)

    Brazdil, T.; Brozek, V.; Etessami, K.; Kucera, A.; Wojtczak, D.K.; Charikar, M.

    2010-01-01

    We study the computational complexity of central analysis problems for One-Counter Markov Decision Processes (OC-MDPs), a class of finitely-presented, countable-state MDPs. OC-MDPs are equivalent to a controlled extension of (discrete-time) Quasi-Birth-Death processes (QBDs), a stochastic model stud

  1. Ultrafine Condensation Particle Counter Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Kuang, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-02-01

    The Model 3776 Ultrafine Condensation Particle Counter (UCPC; pictured in Appendix A) is designed for researchers interested in airborne particles smaller than 20 nm. With sensitivity to particles down to 2.5 nm in diameter, this UCPC is ideally suited for atmospheric and climate research, particle formation and growth studies, combustion and engine exhaust research, and nanotechnology research.

  2. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Point 1 -the zone for the ATLAS experiment. The film includes various stages of construction, especially from the pit of UX 15. Underground work includes the excavation work of the cavern, demolishing the central pillars and posing the support bars for the pit. The UX 15 - will shelter the detector itself. The cavern is located about 100 m below the surface and it is 53 m long, 30 m wide and 34.90 m high.

  3. The effects of bar-spiral coupling on stellar kinematics in the Galaxy

    CERN Document Server

    Monari, Giacomo; Siebert, Arnaud; Grand, Robert J J; Kawata, Daisuke; Boily, Christian

    2016-01-01

    We investigate models of the Milky Way disc taking into account simultaneously the bar and a two-armed quasi-static spiral pattern. Away from major resonance overlaps, the mean stellar radial motions in the plane are essentially a linear superposition of the isolated effects of the bar and spirals. Thus, provided the bar is strong enough, even in the presence of spiral arms, these mean radial motions are predominantly affected by the Galactic bar for large scale velocity fluctuations. This is evident when comparing the peculiar line-of-sight velocity power spectrum of our coupled models with bar-only models. However, we show how forthcoming spectroscopic surveys could disentangle bar-only non-axisymmetric models of the Galaxy from models in which spiral arms have a significant amplitude. We also point out that overlaps of low-order resonances are sufficient to enhance stellar churning within the disc, even when the spirals amplitude is kept constant. Nevertheless, for churning to be truly non-local, stronger ...

  4. Damping of the Milky Way bar by manifold-driven spirals

    CERN Document Server

    Lokas, Ewa L

    2016-01-01

    We describe a new phenomenon of `bar damping' that may have played an important role in shaping the Milky Way bar and bulge as well as its spiral structure. We use a collisionless N-body simulation of a Milky Way-like galaxy initially composed of a dark matter halo and an exponential disk with Toomre parameter slightly above unity. In this configuration, dominated by the disk in the center, a bar forms relatively quickly, after 1 Gyr of evolution. This is immediately followed by the formation of two manifold-driven spiral arms and the outflow of stars that modifies the potential in the vicinity of the bar, apparently shifting the position of the L_1/L_2 Lagrange points. This modification leads to the shortening of the bar and the creation of a next generation of manifold-driven spiral arms at a smaller radius. The process repeats itself a few times over the next 0.5 Gyr resulting in further substantial weakening and shortening of the bar. The time when the damping comes to an end coincides with the first buck...

  5. Cultural Factors Related to Smoking in San Francisco's Irish Bars

    Science.gov (United States)

    Satterlund, Travis D.; Antin, Tamar M. J.; Lee, Juliet P.; Moore, Roland S.

    2009-01-01

    California's Smoke-Free Workplace Act was extended to include bars in 1998. While the majority of bars in the state have become smoke free, in many bars patrons and staff continue to smoke despite the law. The authors present findings from a study which assessed cultural factors related to continued smoking in bars in the city of San Francisco. In…

  6. Branching fractions for chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega

    CERN Document Server

    Onyisi, P U E; Alexander, J P; Cassel, D G; Das, S; Ehrlich, R; Fields, L; Gibbons, L; Gray, S W; Hartill, D L; Heltsley, B K; Hunt, J M; Kreinick, D L; Kuznetsov, V E; Ledoux, J; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Sun, W M; Yelton, J; Rubin, P; Lowrey, N; Mehrabyan, S; Selen, M; Wiss, J; Adams, S; Kornicer, M; Mitchell, R E; Shepherd, M R; Tarbert, C M; Besson, D; Pedlar, T K; Xavier, J; Cronin-Hennessy, D; Hietala, J; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Xiao, T; Tomaradze, A; Brisbane, S; Libby, J; Martin, L; Powell, A; Spradlin, P; Wilkinson, G; Mendez, H; Ge, J Y; Miller, D H; Shipsey, I P J; Xin, B; Adams, G S; Hu, D; Moziak, B; Napolitano, J; Ecklund, K M; Insler, J; Muramatsu, H; Park, C S; Thorndike, E H; Yang, F; Ricciardi, S; Thomas, C; Artuso, M; Blusk, S; Mountain, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M; Bonvicini, G; Cinabro, D; Lincoln, A; Smith, M J; Zhou, P; Zhu, J; Naik, P; Rademacker, J; Asner, D M; Edwards, K W; Reed, J; Randrianarivony, K; Robichaud, A N; Tatishvili, G; White, E J; Briere, R A; Vogel, H

    2010-01-01

    Using a sample of 25.9 million psi(2S) decays acquired with the CLEO-c detector at the CESR e^+e^- collider, we report branching fractions for the decays chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega, with J=0,1,2. Our results for B(chi_cJ-> p p-bar pi^0) and B(chi_cJ-> p p-bar eta) are consistent with, but more precise than, previous measurements. Furthermore, we include the first measurement of B(chi_cJ-> p p-bar omega).

  7. Counter-Narratives and the Unrehearsed Stories Counter-Terrorists Unwittingly Produce.

    OpenAIRE

    Beatrice de Graaf

    2009-01-01

    Governments produce both deliberate and involuntary (and less conscious) narratives when countering terrorism. The thesis of this article is that such unintended messages can be much more powerful and consequential than is realized; in fact, they can completely contradict the intended official 'counter-narrative'. To substantiate this hypothesis, the author looks at the experience of the German Federal Republic in the 1970s and beyond when state and society were confronted with the Red Army F...

  8. Evidence for the existence of $u d \\bar{b} \\bar{b}$ and the non-existence of $s s \\bar{b} \\bar{b}$ and $c c \\bar{b} \\bar{b}$ tetraquarks from lattice QCD

    CERN Document Server

    Bicudo, Pedro; Peters, Antje; Wagenbach, Björn; Wagner, Marc

    2015-01-01

    We combine lattice QCD results for the potential of two static antiquarks in the presence of two quarks $q q$ of finite mass and quark model techniques to study possibly existing $q q \\bar{b} \\bar{b}$ tetraquarks. While there is strong indication for a bound four-quark state for $q q = (ud-du) / \\sqrt{2}$, i.e. isospin $I=0$, we find clear evidence against the existence of corresponding tetraquarks with $q q \\in \\{ uu , (ud+du) / \\sqrt{2} , dd \\}$, i.e. isospin $I=1$, $q q = s s$ and $q q = c c$.

  9. Central Mass Concentration and Bar Dissolution in Nearby Spiral Galaxies

    CERN Document Server

    Das, M; Vogel, S N; Regan, M W; Sheth, K; Harris, A I; Jefferys, W H; Das, Mousumi; Teuben, Peter J.; Vogel, Stuart N.; Regan, Michael W.; Sheth, Kartik; Harris, Andrew I.; Jefferys, William H.

    2003-01-01

    We use data from the BIMA Survey of Nearby Galaxies (SONG) to investigate the relationship between ellipticity and central mass concentration in barred spirals. Existing simulations predict that bar ellipticity decreases as inflowing mass driven by the bar accumulates in the central regions, ultimately destroying the bar. Using the ratio of the bulge mass to the mass within the bar radius as an estimate of the central mass concentration, we obtain dynamical mass estimates from SONG CO 1-0 rotation curve data. We find an inverse correlation between bar ellipticity and central mass concentration, consistent with simulations of bar dissolution.

  10. Allowable irreducible representations of the point groups with five-fold rotational axes

    Indian Academy of Sciences (India)

    K Ram Mohana Rao; B Simhachalam; P Hemagiri Rao

    2012-12-01

    Allowable irreducible representations of the point groups with five-fold rotations – that represent the symmetry of the quasicrystals in two and three dimensions – are derived by employing the little group technique in conjunction with the solvability property. The point groups $D_{5h}(\\bar{10}m2)$ and $I_{h}(\\dfrac{2}{m} \\bar{3} \\bar{5})$ are taken to illustrate the method.

  11. The HST/ACS Coma Cluster Survey. VIII. Barred Disk Galaxies in the Core of the Coma Cluster

    CERN Document Server

    Marinova, Irina; Weinzirl, Tim; Erwin, Peter; Trentham, Neil; Ferguson, Henry C; Hammer, Derek; Brok, Mark den; Graham, Alister W; Carter, David; Balcells, Marc; Goudfrooij, Paul; Guzman, Rafael; Hoyos, Carlos; Mobasher, Bahram; Mouhcine, Mustapha; Peletier, Reynier F; Peng, Eric; Kleijn, Gijs Verdoes

    2012-01-01

    (ABRIDGED) We use high resolution (~0.1") F814W ACS images from the HST ACS Treasury survey of the Coma cluster at z~0.02 to study bars in massive disk galaxies (S0s), and in dwarf galaxies in the Coma core. Our study helps constrain the evolution of bars and disks in dense environments and provides a comparison point for studies in lower density environments and at higher redshifts. (1) We characterize the fraction and properties of bars in a sample of 32 bright (M_V 10^9.5 M_sun) S0 galaxies, which dominate the population of massive disk galaxies in the Coma core. Measuring the S0 bar fraction must be handled carefully, as the results depend on the method used: the bar fraction for bright S0s in the Coma core is 50%+/-11%, 65%+/-11%, and 60%+/-11% for three methods of bar detection: strict ellipse fit criteria, relaxed ellipse fit criteria, and visual classification. (2) We compare the S0 bar fraction across different environments (Coma core, A901/902, Virgo). We find that the bar fraction among bright S0 ...

  12. Biomechanical and Cost Comparisons of Near-Far and Pin-Bar Constructs.

    Science.gov (United States)

    Whitney Kluk, Augusta; Zhang, Tina; Russell, Joseph P; Kim, Hyunchul; Hsieh, Adam H; O'Toole, Robert V

    2017-03-01

    Orthopedic dogma states that external fixator stiffness is improved by placing 1 pin close to the fracture and 1 as distant as possible ("near-far"). This fixator construct is thought to be less expensive than placing pins a shorter distance apart and using "pin-bar" clamps that attach pins to outriggers. The authors therefore hypothesized that the near-far construct is stiffer and less expensive. They compared mechanical stiffness and costs of near-far and pin-bar constructs commonly used for temporary external fixation of femoral shaft fractures. Their testing model simulated femoral shaft fractures in damage control situations. Fourth-generation synthetic femora (n=18) were used. The near-far construct had 2 pins that were 106 mm apart, placed 25 mm from the gap on each side of the fracture. The pin-bar construct pins were 55 mm apart, placed 40 mm from the gap. Mechanical testing was performed on a material test system machine. Stiffness was determined in the linear portion of the load-displacement curve for both constructs in 4 modes: axial compression, torsional loading, frontal plane 3-point bending, and sagittal plane 3-point bending. Costs were determined from a 2012 price guide. Compared with the near-far construct, the pin-bar construct had stiffness increased by 58% in axial compression (P<.05) and by 52% in torsional loading (P<.05). The pin-bar construct increased cost by 11%. In contrast to the authors' hypothesis and existing orthopedic dogma, the near-far construct was less stiff than the pin-bar construct and was similarly priced. Use of the pin-bar construct is mechanically and economically reasonable. [Orthopedics. 2017; 40(2):e238-e241.]. Copyright 2016, SLACK Incorporated.

  13. Nutritional Value and Consumer Acceptance of New Cereal Bars Offered to Children

    Directory of Open Access Journals (Sweden)

    Białek Małgorzata

    2016-07-01

    Full Text Available The main aim of this study was to determine consumer preferences by school-aged children and selected quality indicators of new, highly nutritive grain bars designed as a snack during school break. Consumer acceptance was evaluated by the scaling method using a five-point mimic hedonic scale. Triacylglycerols (TAG and fatty acids (FA composition was assayed in fats extracted from the designed bars (fresh and stored by gas chromatography. Contents of oxidation and hydrolysis products were determined using peroxide value (PV, anisidine value (AnV, and acidic value (AV. The antioxidant activity of the ethanolic extract from bars was measured by scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH radicals and Folin-Ciocalteau methods. The overall liking of bars was high (4.05 pts on average in the 5-point scale. The majority of children (71% scored the designed bars as tasty and very tasty. The designed products contained 22.3% of fat with about 44 g/100 g FA of valuable fatty acids, e.g., short-chain saturated fatty acids (SCSFA, monounsaturated fatty acids (MUFA and odd and branched chain fatty acids (OBCFA, recommended for young organisms. The content of CN52, CN54, CN50 and CN46 triacylglycerols (TAGs (about 49 g/100 g TAG was due to both milk and cocoa fat. Storage of bars did not influence their content of oxidation and hydrolysis products, resulting from a substantial content of total phenolics (TPC (53.64 mg GAE/100 mL of extract and DPPH scavenging activity at the level of 24%. The designed bars may be an interesting confectionery product for children and an alternative to snacks currently available in school shops.

  14. The Vertical Stellar Kinematics in Face-On Barred Galaxies: Estimating the Ages of Bars

    CERN Document Server

    Gadotti, D A; Gadotti, Dimitri A.; Souza, Ronaldo E. de

    2005-01-01

    In order to perform a detailed study of the stellar kinematics in the vertical axis of bars, we obtained high signal-to-noise spectra along the major and minor axes of the bars in a sample of 14 face-on galaxies, and used them to determine the line of sight stellar velocity distribution, parameterized as Gauss-Hermite series. With these data, we developed a diagnostic tool that allows one to distinguish between recently formed and evolved bars, as well as estimate their ages, assuming that bars form in vertically thin disks, recognizable by low values for the vertical velocity dispersion sigma_z. Through N-body realizations of bar unstable disk galaxies we could also check the time scales involved in the processes which give bars an important vertical structure. We show that sigma_z in evolved bars is roughly around 100 Km/s, which translates to a height scale of about 1.4 Kpc, giving support to scenarios in which bulges form through disk material. Furthermore, the bars in our numerical simulations have value...

  15. 21 CFR 866.2180 - Manual colony counter.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Manual colony counter. 866.2180 Section 866.2180...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2180 Manual colony counter. (a) Identification. A manual colony counter is a device intended for medical purposes that...

  16. A UNIFIED FRAMEWORK FOR THE ORBITAL STRUCTURE OF BARS AND TRIAXIAL ELLIPSOIDS

    Energy Technology Data Exchange (ETDEWEB)

    Valluri, Monica; Abbott, Caleb [Department of Astronomy, University of Michigan, Ann Arbor, MI 48109 (United States); Shen, Juntai [Key Laboratory for Research in Galaxies and Cosmology, Shanghai Astronomical Observatory, Chinese Academy of Sciences, 80 Nandan Road, Shanghai 200030 (China); Debattista, Victor P., E-mail: mvalluri@umich.edu, E-mail: calebga@umich.edu, E-mail: jshen@shao.ac.cn, E-mail: vpdebattista@uclan.ac.uk [Jeremiah Horrocks Institute, University of Central Lancashire, Preston, PR1 2HE (United Kingdom)

    2016-02-20

    We examine a large random sample of orbits in two self-consistent simulations of N-body bars. Orbits in these bars are classified both visually and with a new automated orbit classification method based on frequency analysis. The well-known prograde x1 orbit family originates from the same parent orbit as the box orbits in stationary and rotating triaxial ellipsoids. However, only a small fraction of bar orbits (∼4%) have predominately prograde motion like their periodic parent orbit. Most bar orbits arising from the x1 orbit have little net angular momentum in the bar frame, making them equivalent to box orbits in rotating triaxial potentials. In these simulations a small fraction of bar orbits (∼7%) are long-axis tubes that behave exactly like those in triaxial ellipsoids: they are tipped about the intermediate axis owing to the Coriolis force, with the sense of tipping determined by the sign of their angular momentum about the long axis. No orbits parented by prograde periodic x2 orbits are found in the pure bar model, but a tiny population (∼2%) of short-axis tube orbits parented by retrograde x4 orbits are found. When a central point mass representing a supermassive black hole (SMBH) is grown adiabatically at the center of the bar, those orbits that lie in the immediate vicinity of the SMBH are transformed into precessing Keplerian orbits that belong to the same major families (short-axis tubes, long-axis tubes and boxes) occupying the bar at larger radii. During the growth of an SMBH, the inflow of mass and outward transport of angular momentum transform some x1 and long-axis tube orbits into prograde short-axis tubes. This study has important implications for future attempts to constrain the masses of SMBHs in barred galaxies using orbit-based methods like the Schwarzschild orbit superposition scheme and for understanding the observed features in barred galaxies.

  17. Developing fruit-based nutritious snack bars.

    Science.gov (United States)

    da Silva, Edson P; Siqueira, Heloisa H; do Lago, Rafael Carvalho; Rosell, Cristina M; Vilas Boas, Eduardo V de Barros

    2014-01-15

    Marolo (Annona crassiflora Mart) is a typical savannah fruit that is very nutritious and highly appreciated. However, its consumption has been limited to fresh fruit. The objective of this study was to evaluate the potential use of marolo flour in the production of healthy snack bars to valorise this fruit and provide an alternative ready-to-eat nutritious product. Snack bars containing increasing amounts of marolo flour (5 g 100 g(-1), 10 g 100 g(-1), 15 g 100 g(-1), 20 g 100 g(-1), expressed in w/w) were produced and the physico-chemical and sensory characteristics were determined. Levels up to 20% marolo flour can be incorporated in snack bars with some minor changes in pH and moisture content but with an increase of 2.4-fold in dietary fibre content and also 1.3-fold of vitamin C, minerals and antioxidant activity. In addition, up to 10% marolo flour improves significantly the sensory properties of the snack bars, namely appearance, taste, texture and overall acceptance. Marolo flour can be considered an alternative flour for obtaining healthy snack bars, with increased nutritional and sensory quality. © 2013 Society of Chemical Industry.

  18. Stellar diffusion in barred spiral galaxies

    CERN Document Server

    Brunetti, Maura; Pfenniger, Daniel

    2011-01-01

    We characterize empirically the radial diffusion of stars in the plane of a typical barred disk galaxy by calculating the local spatial diffusion coefficient and diffusion time-scale for bulge-disk-halo N-body self-consistent systems which initially differ in the Safronov-Toomre-Q_T parameter. We find different diffusion scenarios that depend on the bar strength and on the degree of instability of the disk. Marginally stable disks, with Q_T \\sim 1, have two families of bar orbits with different values of angular momentum and energy, which determine a large diffusion in the corotation region. In hot disks, Q_T> 1, stellar diffusion is reduced with respect to the case of marginally stable disks. In cold models, we find that spatial diffusion is not constant in time and strongly depends on the activity of the bar, which can move stars all over the disk recurrently. We conclude that to realistically study the impact of radial migration on the chemical evolution modeling of the Milky Way the role of the bar has to...

  19. $NDK$, $\\bar{K} DN$ and $ND\\bar{D}$ molecules

    CERN Document Server

    Xiao, C W; Oset, E

    2011-01-01

    We investigate theoretically baryon systems made of three hadrons which contain one nucleon and one D meson, and in addition another meson, $\\bar{D}, K$ or $\\bar{K}$. The systems are studied using the Fixed Center Approximation to the Faddeev equations. The study is made assuming scattering of a $K$ or a $\\bar{K}$ on a $DN$ cluster, which is known to generate the $\\Lambda_c(2595)$, or the scattering of a nucleon on the $D\\bar{D}$ cluster, which has been shown to generate a hidden charm resonance named X(3700). We also investigate the configuration of scattering of $N$ on the $KD$ cluster, which is known to generate the $D_{s0}^*(2317)$. In all cases we find bound states, with the $NDK$ system, of exotic nature, more bound than the $\\bar{K} DN$.

  20. The Impact of Bar Code Medication Administration Technology on Reported Medication Errors

    Science.gov (United States)

    Holecek, Andrea

    2011-01-01

    The use of bar-code medication administration technology is on the rise in acute care facilities in the United States. The technology is purported to decrease medication errors that occur at the point of administration. How significantly this technology affects actual rate and severity of error is unknown. This descriptive, longitudinal research…

  1. Fusional Vergence Detected by Prism Bar and Synoptophore in Chinese Childhood Intermittent Exotropia

    Directory of Open Access Journals (Sweden)

    Tao Fu

    2015-01-01

    Full Text Available Purpose. To measure the changes in fusional vergence in Chinese children with intermittent exotropia (IXT and the association with the control of IXT. Methods. Ninety-two patients with IXT (8–15 years old were compared with 86 controls. Exodeviation control was evaluated using the Revised Newcastle Control Score. Angle of deviation was measured using prism and alternate cover testing at distance and near. Fusional vergence was measured using prism bar and synoptophore. This study was registered with ChiCTR-RCC-13003920. Results. Using prism bar, convergence break points were lower whereas divergence break points were higher in children with IXT at distance (P<0.001 and near (P<0.001 compared with controls. There was no significant difference in mean divergence amplitudes between the two groups when testing using a synoptophore (P=0.53. In children with IXT, the distance between recovery point and break point in both convergence (distance: P=0.02; near: P=0.02 and divergence (distance: P<0.001; near: P<0.001 was larger than controls when detected by prism bar and synoptophore (convergence: P=0.005; divergence: P=0.006. Conclusions. Children with IXT have reduced convergence amplitudes as detected by both prism bar and synoptophore.

  2. Track reconstruction in the BESⅢ muon counter

    Institute of Scientific and Technical Information of China (English)

    LIANG Yu-Tie; LIU Kun; YOU Zheng-Yun; MAO Ya-Jun; LI Wei-Dong; BIAN Jian-Ming; CAO Guo-Fu; CAO Xue-Xiang; CHEN Shen-Jian; DENG Zi-Yan; FU Cheng-Dong; GAO Yuan-Ning; HAN Lei; HAN Shao-Qing; HE Kang-Lin; HE Miao; HU Ji-Feng; HU Xiao-Wei; HUANG Bin; HUANG Xing-Tao; JIA Lu-Kui; JI Xiao-Bin; LI Hai-Bo; LIU Bei-Jiang; LIU Chun-Xiu; LIU Huai-Min; LIU Ying; LIU Yong; LUO Tao; Lü Qi-Wen; MA Qiu-Mei; MA Xiang; MAO Ze-Pu; MO Xiao-Hu; NING Fei-Peng; PING Rong-Gang; QIU Jin-Fa; SONG Wen-Bo; SUN Sheng-Sen; SUN Xiao-Dong; SUN Yong-Zhao; TIAN Hao-Lai; WANG Ji-Ke; WANG Liang-Liang; WEN Shuo-Pin; WU Ling-Hui; WU Zhi; XIE Yu-Guang; XU Min; YAN Jie; YAN Liang; YAO Jian; YUAN Chang-Zheng; YUAN Ye; ZHANG Chang-Chun; ZHANG Jian-Yong; ZHANG Lei; ZHANG Xue-Yao; ZHANG Yao; ZHENG Yang-Heng; ZHU Yong-Sheng; ZOU Jia-Heng

    2009-01-01

    The reconstruction algorithm for BESⅢ Muon Counter, MucRecAlg, is developed with the object-oriented language C++ in BESⅢ offline software environment. MucRecAlg consists of the following functions: to find track seeds either from extrapolation of tracks in the main drift chamber or from the fired strips in muon counter, to select fired strips associated to the candidate tracks, to fit the candidate tracks with a linear or quadratic function and to calculate other parameters of the tracks for muon identification. Monte Carlo samples are generated to check the performance of the reconstruction package, such as reconstruction efficiency, muon remaining rate and pion rejection rate, etc. The preliminary results show that the pion rejection rate is around 3%-4% while the muon remaining rate is better than 90% in 0.4-1.6 GeV/c momentum region, which meets the requirement as shown in the design report.

  3. (120) and (122-bar) monazite deformation twins

    Energy Technology Data Exchange (ETDEWEB)

    Hay, R.S

    2003-10-20

    Unusual features of (120) and (122-bar) deformation twins in monazite (monoclinic LaPO{sub 4}) are described and analyzed. These features are kinks and other irregularities in (120) twins, and V-shaped indentations on (120) and (122-bar) twin planes. Twinning shear analysis suggests that the kinks are a type II deformation twin mode with shear direction ({eta}{sub 1}) of [21-bar0]. This complements previous analysis based on atom shuffling considerations. Shear strain compatibility requires extensive plastic deformation in the kink. The V-shaped indentations may be analogous to similar structures in b.c.c metal deformation twins. Deformation mechanisms that may be associated with these structures are discussed.

  4. Neutron counter based on beryllium activation

    Energy Technology Data Exchange (ETDEWEB)

    Bienkowska, B.; Prokopowicz, R.; Kaczmarczyk, J.; Paducha, M. [Institute of Plasma Physics and Laser Microfusion (IPPLM), Hery 23, 01-497 Warsaw (Poland); Scholz, M.; Igielski, A. [Institute of Nuclear Physics PAS (IFJPAN), Radzikowskiego 152, 31-342 Krakow (Poland); Karpinski, L. [Faculty of Electrical Engineering, Rzeszow University of Technology, Pola 2, 35-959 Rzeszow (Poland); Pytel, K. [National Centre for Nuclear Research (NCBJ), Soltana 7, 05-400 Otwock - Swierk (Poland)

    2014-08-21

    The fusion reaction occurring in DD plasma is followed by emission of 2.45 MeV neutrons, which carry out information about fusion reaction rate and plasma parameters and properties as well. Neutron activation of beryllium has been chosen for detection of DD fusion neutrons. The cross-section for reaction {sup 9}Be(n, α){sup 6}He has a useful threshold near 1 MeV, which means that undesirable multiple-scattered neutrons do not undergo that reaction and therefore are not recorded. The product of the reaction, {sup 6}He, decays with half-life T{sub 1/2} = 0.807 s emitting β{sup −} particles which are easy to detect. Large area gas sealed proportional detector has been chosen as a counter of β–particles leaving activated beryllium plate. The plate with optimized dimensions adjoins the proportional counter entrance window. Such set-up is also equipped with appropriate electronic components and forms beryllium neutron activation counter. The neutron flux density on beryllium plate can be determined from the number of counts. The proper calibration procedure needs to be performed, therefore, to establish such relation. The measurements with the use of known β–source have been done. In order to determine the detector response function such experiment have been modeled by means of MCNP5–the Monte Carlo transport code. It allowed proper application of the results of transport calculations of β{sup −} particles emitted from radioactive {sup 6}He and reaching proportional detector active volume. In order to test the counter system and measuring procedure a number of experiments have been performed on PF devices. The experimental conditions have been simulated by means of MCNP5. The correctness of simulation outcome have been proved by measurements with known radioactive neutron source. The results of the DD fusion neutron measurements have been compared with other neutron diagnostics.

  5. Neutron counter based on beryllium activation

    Science.gov (United States)

    Bienkowska, B.; Prokopowicz, R.; Scholz, M.; Kaczmarczyk, J.; Igielski, A.; Karpinski, L.; Paducha, M.; Pytel, K.

    2014-08-01

    The fusion reaction occurring in DD plasma is followed by emission of 2.45 MeV neutrons, which carry out information about fusion reaction rate and plasma parameters and properties as well. Neutron activation of beryllium has been chosen for detection of DD fusion neutrons. The cross-section for reaction 9Be(n, α)6He has a useful threshold near 1 MeV, which means that undesirable multiple-scattered neutrons do not undergo that reaction and therefore are not recorded. The product of the reaction, 6He, decays with half-life T1/2 = 0.807 s emitting β- particles which are easy to detect. Large area gas sealed proportional detector has been chosen as a counter of β-particles leaving activated beryllium plate. The plate with optimized dimensions adjoins the proportional counter entrance window. Such set-up is also equipped with appropriate electronic components and forms beryllium neutron activation counter. The neutron flux density on beryllium plate can be determined from the number of counts. The proper calibration procedure needs to be performed, therefore, to establish such relation. The measurements with the use of known β-source have been done. In order to determine the detector response function such experiment have been modeled by means of MCNP5-the Monte Carlo transport code. It allowed proper application of the results of transport calculations of β- particles emitted from radioactive 6He and reaching proportional detector active volume. In order to test the counter system and measuring procedure a number of experiments have been performed on PF devices. The experimental conditions have been simulated by means of MCNP5. The correctness of simulation outcome have been proved by measurements with known radioactive neutron source. The results of the DD fusion neutron measurements have been compared with other neutron diagnostics.

  6. Prevent: A Fragmented Counter-Terrorism Strategy

    Science.gov (United States)

    2015-05-21

    of the Prevent strategy. The British counter-insurgency experiences in Malaysia provide an invaluable insight into the historical lessons of...cultural diversity , and language are recognized, it becomes easier to appreciate why a separation from the rest of the United Kingdom’s society is...autonomy in Malaysia reflect a similar dichotomy that the OSCT and DCLG face today. The Prevent strategy of decentralized control and emphasis on local

  7. Light Obscuration Particle Counter Fuel Contamination Limits

    Science.gov (United States)

    2015-10-08

    4) (5). The Army utilizes ASTM D4176 – Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection ...where high in the 4µm (c) channel only. 78 samples where aviation fuels (JP-8 and F-24) that where high in the 6µm (c),14µm (c), and/or 30µm (c...AND USE OF LIQUID FUELS Charleston, South Carolina USA 4-8 October 2015 LIGHT OBSCURATION PARTICLE COUNTER FUEL CONTAMINATION LIMITS Joel

  8. Surface state of the dual topological insulator Bi0.91Sb0.09 (11 2 bar)

    Science.gov (United States)

    Matsuda, I.; Yaji, K.; Taskin, A. A.; D'angelo, M.; Yukawa, R.; Ohtsubo, Y.; Le Fèvre, P.; Bertran, F.; Yoshizawa, S.; Taleb-Ibrahimi, A.; Kakizaki, A.; Ando, Yoichi; Komori, F.

    2017-07-01

    The electronic structure of a Bi0.91Sb0.09 single crystal was elucidated at a bisectrix (11 2 bar) surface by angle-resolved photoemission spectroscopy using microbeam synchrotron radiation. A Dirac-cone-like dispersion of the surface state was observed at the Γ bar point. The detected surface-state band likely corresponds to the one observed in previous quantum transport research (Taskin and Ando, 2009) [14].

  9. Imaging of physeal bars in children

    Energy Technology Data Exchange (ETDEWEB)

    Wang, David C. [Massachusetts General Hospital and Harvard Medical School, Department of Radiology, Boston, MA (United States); Deeney, Vincent; Roach, James W. [Children' s Hospital of Pittsburgh of UPMC, Department of Orthopedics, Pittsburgh, PA (United States); Shah, Amisha J. [Children' s Hospital of Pittsburgh of UPMC, Department of Radiology, Pittsburgh, PA (United States)

    2015-08-15

    The growth plate, also known as the physis or epiphyseal plate, is essential for longitudinal growth of bones in the immature skeleton. A variety of insults to the growth plate from trauma to infection to idiopathic causes can lead to physeal bar formation, an interruption in normal growth plate cartilage, where a bony or fibrous bridge develops between the metaphysis and epiphysis. This bridge restricts subsequent bone growth, leading to limb shortening and/or angular deformities. Early recognition of the presence of a physeal bar can help direct appropriate surgical management to restore linear growth of the bone. (orig.)

  10. BAR FREGOLI [Material gráfico

    OpenAIRE

    Fundación para la Etnografía y el Desarrollo de la Artesanía Canaria

    1990-01-01

    ANTES LOS MOSTRADORES ERAN DE MADERA, HASTA QUE EN 1998 HIZO UNA REFORMA Y LOS CAMBIÓ POR LOS ACTUALES HECHO DE CORIAN. Antiguedad: SIGLO XX BAR DE REDUCIDAS DIMENSIONES. PLANTA RECTANGULAR. BARA EN FORMA DE "L", HECHA EN CORIAN. POSEE UN PEQUEÑO BAÑO, UNA PLANCHA Y UNA CAFETERA. BIENES MUEBLES ASOCIADOS: POSEE TODAVÍA UNA MÁQUINA DE CAFÉ A GAS, MARCA "FAEMA" QUE TIENE DESDE QUE ABRIÓ EL BAR EN 1977 Y QUE TODAVÍA ES LA QUE USA. Calificación del suelo: URBANO CONSOLIDADO Clasifi...

  11. Sine-Bar Attachment For Machine Tools

    Science.gov (United States)

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  12. Solving Problems with The Percentage Bar

    Directory of Open Access Journals (Sweden)

    Frans van Galen

    2013-01-01

    Full Text Available At the end of primary school all children more of less know what apercentage is, but yet they often struggle with percentage problems.This article describes a study in which students of 13 and 14 years old were given a written test with percentage problems and a week later were interviewed about the way they solved some of these problems. In a teaching experiment the students were then taught the use of the percentage bar. Although the teaching experiment was very short - just one lesson - the results confirm that the percentage bar is a powerful model that deserves a central place in the teaching of percentages

  13. Sine-Bar Attachment For Machine Tools

    Science.gov (United States)

    Mann, Franklin D.

    1988-01-01

    Sine-bar attachment for collets, spindles, and chucks helps machinists set up quickly for precise angular cuts that require greater precision than provided by graduations of machine tools. Machinist uses attachment to index head, carriage of milling machine or lathe relative to table or turning axis of tool. Attachment accurate to 1 minute or arc depending on length of sine bar and precision of gauge blocks in setup. Attachment installs quickly and easily on almost any type of lathe or mill. Requires no special clamps or fixtures, and eliminates many trial-and-error measurements. More stable than improvised setups and not jarred out of position readily.

  14. Jazz Chants Born in a Piano Bar

    Directory of Open Access Journals (Sweden)

    Caroline Graham

    2010-01-01

    Full Text Available When I first arrived in New York in the late sixties, I began teaching ESL at New York University. I didn`t really think of teaching as a profession for me. I just thought it would pay the rent so I could do what I really wanted to do which was to sing and play ragtime piano in the piano bars. When I got my first piano job in an Irish Bar it was uptown, far away from NYU so I didn`t feel it was necessary to mention this night job to my boss.

  15. M33: THE EXISTENCE OF A BAR

    Directory of Open Access Journals (Sweden)

    I. Hernández-López

    2009-01-01

    Full Text Available A signi cant fraction of galaxies in the Local Universe classi ed as unbarred in the RC3 turn out to be barred in optical and NIR wavelengths. In the Local Group the Milky Way and M31 have shown to be barred as well, this also could be the case of M33. In this paper we present the results of the Ellipse tting and bidimensional Fourier Analysis, on the R and I bands, deprojected and non-deprojected, images of M33 obtained from DSS2 and Spitzer-IRAC.

  16. B Counting at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    McGregor, Grant Duncan

    2008-12-16

    In this thesis we examine the method of counting B{bar B} events produced in the BABAR experiment. The original method was proposed in 2000, but improvements to track reconstruction and our understanding of the detector since that date make it appropriate to revisit the B Counting method. We propose a new set of cuts designed to minimize the sensitivity to time-varying backgrounds. We find the new method counts B{bar B} events with an associated systematic uncertainty of {+-} 0.6%.

  17. Newtorites in bar detectors of gravitational wave

    CERN Document Server

    Ronga, F

    2016-01-01

    The detection of particles with only gravitational interactions (Newtorites) in gravitational bar detectors was studied in 1984 by Bernard, De Rujula and Lautrup. The negative results of dark matter searches suggest to look to exotic possibilities like Newtorites. The limits obtained with the Nautilus bar detector will be presented and the possible improvements will be discussed. Since the gravitational coupling is very weak, the possible limits are very far from what is needed for dark matter, but for large masses are the best limits obtained on the Earth. An update of limits for MACRO particles will be given.

  18. Four Experiments on the Perception of Bar Charts.

    Science.gov (United States)

    Talbot, Justin; Setlur, Vidya; Anand, Anushka

    2014-12-01

    Bar charts are one of the most common visualization types. In a classic graphical perception paper, Cleveland & McGill studied how different bar chart designs impact the accuracy with which viewers can complete simple perceptual tasks. They found that people perform substantially worse on stacked bar charts than on aligned bar charts, and that comparisons between adjacent bars are more accurate than between widely separated bars. However, the study did not explore why these differences occur. In this paper, we describe a series of follow-up experiments to further explore and explain their results. While our results generally confirm Cleveland & McGill's ranking of various bar chart configurations, we provide additional insight into the bar chart reading task and the sources of participants' errors. We use our results to propose new hypotheses on the perception of bar charts.

  19. Hardware support for software controlled fast multiplexing of performance counters

    Science.gov (United States)

    Salapura, Valentina; Wisniewski, Robert W.

    2013-01-01

    Performance counters may be operable to collect one or more counts of one or more selected activities, and registers may be operable to store a set of performance counter configurations. A state machine may be operable to automatically select a register from the registers for reconfiguring the one or more performance counters in response to receiving a first signal. The state machine may be further operable to reconfigure the one or more performance counters based on a configuration specified in the selected register. The state machine yet further may be operable to copy data in selected one or more of the performance counters to a memory location, or to copy data from the memory location to the counters, in response to receiving a second signal. The state machine may be operable to store or restore the counter values and state machine configuration in response to a context switch event.

  20. Observation of B+ --> K0bar K+ and B0 --> K0 K0bar

    CERN Document Server

    Aubert, B; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Gill, M S; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Del, P; Amo Sanchez; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Watson, A T; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Asgeirsson, D J; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Sherwood, D J; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, K Yu; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Hadavand, H K; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dvoretskii, A; Fang, F; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Mancinelli, G; Meadows, B T; Mishra, K; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nagel, M; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Merkel, J; Petzold, A; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Latour, E; Thiebaux, C; Verderi, M; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Contri, R; Lo, M; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bard, D J; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Behera, P K; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Denig, A G; Fritsch, M; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Wren, A C; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Cowan, R; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Mclachlin, S E; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côté, D; Simard, M; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M A; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Corwin, L A; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Rahimi, A M; Regensburger, J J; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Kolb, J A; Lu, M; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Briand, H; Chauveau, J; David, P; Del, L; Buono; La Vaissière, C de; Hamon, O; Hartfiel, B L; Leruste, P; Malcles, J; Ocariz, J; Roos, L; Therin, G; Gladney, L; Biasini, M; Covarelli, R; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Paoloni, E; Rizzo, G; Walsh, J J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Aleksan, R; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Vasseur, G; Yéche, C; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Grenier, P; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Leith, D W G S; Li, S; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schilling, C J; Schwitters, R F; Izen, J M; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Lanceri, L; Vitale, L; Azzolini, V; Lopez-March, N; Martínez-Vidal, F; Banerjee, Sw; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Flood, K T; Hollar, J J; Kutter, P E; Mellado, B; Mihályi, A; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We report observations of the b --> d penguin-dominated decays B+ --> K0bar K+ and B0 --> K0 K0bar in approximately 350 million Upsilon(4S) --> BBbar decays collected with the BaBar detector. We measure the branching fractions B(B+ --> K0bar K+) = (1.61 +/- 0.44 +/- 0.09) * 10^-6 and B(B0 --> K0 K0bar) = (1.08 +/- 0.28 +/- 0.11) * 10^-6, and the CP-violating charge asymmetry A_{CP}(K0bar K+) = 0.10 +/- 0.26 +/- 0.03. Using a vertexing technique previously employed in several analyses of all-neutral final states containing kaons, we report the first measurement of time-dependent CP-violating asymmetries in B0 --> K0 K0bar, obtaining S = -1.28 +0.80/-0.73 +0.11/-0.16 and C = -0.40 +/- 0.41 +/- 0.06. We also report improved measurements of the branching fraction B(B0 --> K0 pi+) = (23.9 +/- 1.1 +/- 1.0) * 10^-6 and CP-violating charge asymmetry A_{CP}(K0 pi+) = -0.029 +/- 0.039 +/- 0.010.

  1. CMS High Level Trigger for boosted $t\\bar{t}$ events

    CERN Document Server

    Celli, Federico

    2016-01-01

    In this work we studied the efficiency of a new CMS high level trigger path for boosted topology $t\\bar{t}$ events, available during the 2016 LHC run at 13 TeV. We found out that this trigger was affected by a prescale factor bug that did not allow us to register about 18.4% of candidate $t\\bar{t}$ events, leading to an apparent loss in the trigger efficiency. This work has also pointed out that as soon as this issue is solved we will be able to use the new trigger path with good performances, increasing the statistics in future measurements.

  2. Test of bar window with internal bars free from the glass surfaces

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1998-01-01

    A sealed glazing unit with 3 horisontal and 3 vertical bars and a reference glazing without bars have been tested in a guarded hotbox. The difference in measured heat loss coefficient between the two test objects is a measure of the thermal influence of the bars. The difference in heat loss coeff...... coefficent was found to 1.9 and 1.5 W/(m2 K) respectively. The difference was larger than expected. Opening of the sealed glazing unit showed that the gap distance only was 1/3 of the expected....

  3. Measurement of the forward-backward asymmetry of $\\Lambda$ and $\\bar{\\Lambda}$ production in $p \\bar{p}$ collisions

    CERN Document Server

    Abazov, Victor Mukhamedovich; Acharya, Bannanje Sripath; Adams, Mark Raymond; Adams, Todd; Agnew, James P; Alexeev, Guennadi D; Alkhazov, Georgiy D; Alton, Andrew K; Askew, Andrew Warren; Atkins, Scott; Augsten, Kamil; Avila, Carlos A; Badaud, Frederique; Bagby, Linda F; Baldin, Boris; Bandurin, Dmitry V; Banerjee, Sunanda; Barberis, Emanuela; Baringer, Philip S; Bartlett, JFrederick; Bassler, Ursula Rita; Bazterra, Victor; Bean, Alice L; Begalli, Marcia; Bellantoni, Leo; Beri, Suman B; Bernardi, Gregorio; Bernhard, Ralf Patrick; Bertram, Iain A; Besancon, Marc; Beuselinck, Raymond; Bhat, Pushpalatha C; Bhatia, Sudeep; Bhatnagar, Vipin; Blazey, Gerald Charles; Blessing, Susan K; Bloom, Kenneth A; Boehnlein, Amber S; Boline, Daniel Dooley; Boos, Edward E; Borissov, Guennadi; Borysova, Maryna; Brandt, Andrew; Brandt, Oleg; Brock, Raymond L; Bross, Alan D; Brown, Duncan Paul; Bu, Xue-Bing; Buehler, Marc; Buescher, Volker; Bunichev, Viacheslav Yevgenyevich; Burdin, Sergey; Buszello, Claus Peter; Camacho-Perez, Enrique; Casey, Brendan Cameron Kieran; Castilla-Valdez, Heriberto; Caughron, Seth Aaron; Chakrabarti, Subhendu; Chan, Kwok Ming Leo; Chandra, Avdhesh; Chapon, Emilien; Chen, Guo; Cho, Sung-Woong; Choi, Suyong; Choudhary, Brajesh C; Cihangir, Selcuk; Claes, Daniel R; Clutter, Justace Randall; Cooke, Michael P; Cooper, William Edward; Corcoran, Marjorie D; Couderc, Fabrice; Cousinou, Marie-Claude; Cuth, Jakub; Cutts, David; Das, Amitabha; Davies, Gavin John; de Jong, Sijbrand Jan; De La Cruz-Burelo, Eduard; Deliot, Frederic; Demina, Regina; Denisov, Dmitri S; Denisov, Sergei P; Desai, Satish Vijay; Deterre, Cecile; DeVaughan, Kayle Otis; Diehl, HThomas; Diesburg, Michael; Ding, Pengfei; Dominguez, DAaron M; Dubey, Abhinav Kumar; Dudko, Lev V; Duperrin, Arnaud; Dutt, Suneel; Eads, Michael T; Edmunds, Daniel L; Ellison, John A; Elvira, VDaniel; Enari, Yuji; Evans, Harold G; Evdokimov, Anatoly V; Evdokimov, Valeri N; Faure, Alexandre; Feng, Lei; Ferbel, Thomas; Fiedler, Frank; Filthaut, Frank; Fisher, Wade Cameron; Fisk, HEugene; Fortner, Michael R; Fox, Harald; Franc, Jiri; Fuess, Stuart C; Garbincius, Peter H; Garcia-Bellido, Aran; Garcia-Gonzalez, Jose Andres; Gavrilov, Vladimir B; Geng, Weigang; Gerber, Cecilia Elena; Gershtein, Yuri S; Ginther, George E; Gogota, Olga; Golovanov, Georgy Anatolievich; Grannis, Paul D; Greder, Sebastien; Greenlee, Herbert B; Grenier, Gerald Jean; Gris, Phillipe Luc; Grivaz, Jean-Francois; Grohsjean, Alexander; Gruenendahl, Stefan; Gruenewald, Martin Werner; Guillemin, Thibault; Gutierrez, Gaston R; Gutierrez, Phillip; Haley, Joseph Glenn Biddle; Han, Liang; Harder, Kristian; Harel, Amnon; Hauptman, John Michael; Hays, Jonathan M; Head, Tim; Hebbeker, Thomas; Hedin, David R; Hegab, Hatim; Heinson, Ann; Heintz, Ulrich; Hensel, Carsten; Heredia-De La Cruz, Ivan; Herner, Kenneth Richard; Hesketh, Gavin G; Hildreth, Michael D; Hirosky, Robert James; Hoang, Trang; Hobbs, John D; Hoeneisen, Bruce; Hogan, Julie; Hohlfeld, Mark; Holzbauer, Jenny Lyn; Howley, Ian James; Hubacek, Zdenek; Hynek, Vlastislav; Iashvili, Ia; Ilchenko, Yuriy; Illingworth, Robert A; Ito, Albert S; Jabeen, Shabnam; Jaffre, Michel J; Jayasinghe, Ayesh; Jeong, Min-Soo; Jesik, Richard L; Jiang, Peng; Johns, Kenneth Arthur; Johnson, Emily; Johnson, Marvin E; Jonckheere, Alan M; Jonsson, Per Martin; Joshi, Jyoti; Jung, Andreas Werner; Juste, Aurelio; Kajfasz, Eric; Karmanov, Dmitriy Y; Katsanos, Ioannis; Kaur, Manbir; Kehoe, Robert Leo Patrick; Kermiche, Smain; Khalatyan, Norayr; Khanov, Alexander; Kharchilava, Avto; Kharzheev, Yuri N; Kiselevich, Ivan Lvovich; Kohli, Jatinder M; Kozelov, Alexander V; Kraus, James Alexander; Kumar, Ashish; Kupco, Alexander; Kurca, Tibor; Kuzmin, Valentin Alexandrovich; Lammers, Sabine Wedam; Lebrun, Patrice; Lee, Hyeon-Seung; Lee, Seh-Wook; Lee, William M; Lei, Xiaowen; Lellouch, Jeremie; Li, Dikai; Li, Hengne; Li, Liang; Li, Qi-Zhong; Lim, Jeong Ku; Lincoln, Donald W; Linnemann, James Thomas; Lipaev, Vladimir V; Lipton, Ronald J; Liu, Huanzhao; Liu, Yanwen; Lobodenko, Alexandre; Lokajicek, Milos; Lopes de Sa, Rafael; Luna-Garcia, Rene; Lyon, Adam Leonard; Maciel, Arthur KA; Madar, Romain; Magana-Villalba, Ricardo; Malik, Sudhir; Malyshev, Vladimir L; Mansour, Jason; Martinez-Ortega, Jorge; McCarthy, Robert L; Mcgivern, Carrie Lynne; Meijer, Melvin M; Melnitchouk, Alexander S; Menezes, Diego D; Mercadante, Pedro Galli; Merkin, Mikhail M; Meyer, Arnd; Meyer, Jorg Manfred; Miconi, Florian; Mondal, Naba K; Mulhearn, Michael James; Nagy, Elemer; Narain, Meenakshi; Nayyar, Ruchika; Neal, Homer A; Negret, Juan Pablo; Neustroev, Petr V; Nguyen, Huong Thi; Nunnemann, Thomas P; Hernandez Orduna, Jose de Jesus; Osman, Nicolas Ahmed; Osta, Jyotsna; Pal, Arnab; Parashar, Neeti; Parihar, Vivek; Park, Sung Keun; Partridge, Richard A; Parua, Nirmalya; Patwa, Abid; Penning, Bjoern; Perfilov, Maxim Anatolyevich; Peters, Reinhild Yvonne Fatima; Petridis, Konstantinos; Petrillo, Gianluca; Petroff, Pierre; Pleier, Marc-Andre; Podstavkov, Vladimir M; Popov, Alexey V; Prewitt, Michelle; Price, Darren; Prokopenko, Nikolay N; Qian, Jianming; Quadt, Arnulf; Quinn, Gene Breese; Ratoff, Peter N; Razumov, Ivan A; Ripp-Baudot, Isabelle; Rizatdinova, Flera; Rominsky, Mandy Kathleen; Ross, Anthony; Royon, Christophe; Rubinov, Paul Michael; Ruchti, Randal C; Sajot, Gerard; Sanchez-Hernandez, Alberto; Sanders, Michiel P; Santos, Angelo Souza; Savage, David G; Savitskyi, Mykola; Sawyer, HLee; Scanlon, Timothy P; Schamberger, RDean; Scheglov, Yury A; Schellman, Heidi M; Schott, Matthias; Schwanenberger, Christian; Schwienhorst, Reinhard H; Sekaric, Jadranka; Severini, Horst; Shabalina, Elizaveta K; Shary, Viacheslav V; Shaw, Savanna; Shchukin, Andrey A; Simak, Vladislav J; Skubic, Patrick Louis; Slattery, Paul F; Smirnov, Dmitri V; Snow, Gregory R; Snow, Joel Mark; Snyder, Scott Stuart; Soldner-Rembold, Stefan; Sonnenschein, Lars; Soustruznik, Karel; Stark, Jan; Stoyanova, Dina A; Strauss, Michael G; Suter, Louise; Svoisky, Peter V; Titov, Maxim; Tokmenin, Valeriy V; Tsai, Yun-Tse; Tsybychev, Dmitri; Tuchming, Boris; Tully, Christopher George T; Uvarov, Lev; Uvarov, Sergey L; Uzunyan, Sergey A; Van Kooten, Richard J; van Leeuwen, Willem M; Varelas, Nikos; Varnes, Erich W; Vasilyev, Igor A; Verkheev, Alexander Yurievich; Vertogradov, Leonid S; Verzocchi, Marco; Vesterinen, Mika; Vilanova, Didier; Vokac, Petr; Wahl, Horst D; Wang, Michael HLS; Warchol, Jadwiga; Watts, Gordon Thomas; Wayne, Mitchell R; Weichert, Jonas; Welty-Rieger, Leah Christine; Williams, Mark Richard James; Wilson, Graham Wallace; Wobisch, Markus; Wood, Darien Robert; Wyatt, Terence R; Xie, Yunhe; Yamada, Ryuji; Yang, Siqi; Yasuda, Takahiro; Yatsunenko, Yuriy A; Ye, Wanyu; Ye, Zhenyu; Yin, Hang; Yip, Kin; Youn, Sungwoo; Yu, Jiaming; Zennamo, Joseph; Zhao, Tianqi Gilbert; Zhou, Bing; Zhu, Junjie; Zielinski, Marek; Zieminska, Daria; Zivkovic, Lidija

    2015-01-01

    We study $\\Lambda$ and $\\bar{\\Lambda}$ production asymmetries in $p \\bar{p} \\rightarrow \\Lambda (\\bar{\\Lambda}) X$, $p \\bar{p} \\rightarrow J/\\psi \\Lambda (\\bar{\\Lambda}) X$, and $p \\bar{p} \\rightarrow \\mu^\\pm \\Lambda (\\bar{\\Lambda}) X$ events recorded by the D0 detector at the Fermilab Tevatron collider at $\\sqrt{s} = 1.96$ TeV. We find an excess of $\\Lambda$'s ($\\bar{\\Lambda}$'s) produced in the proton (antiproton) direction. This forward-backward asymmetry is measured as a function of rapidity. We confirm that the $\\bar{\\Lambda}/\\Lambda$ production ratio, measured by several experiments with various targets and a wide range of energies, is a universal function of "rapidity loss", i.e., the rapidity difference of the beam proton and the lambda.

  4. Possible strange hidden-charm pentaquarks from $\\Sigma_c^{(*)}\\bar{D}_s^*$ and $\\Xi^{(',*)}_c\\bar{D}^*$ interactions

    CERN Document Server

    Chen, Rui; Liu, Xiang

    2016-01-01

    In a one-boson-exchange model with one-pion and one-eta exchanges, we investigate possible strange hidden-charm pentaquarks produced from the $\\Lambda_c\\bar{D}_s^*$, $\\Sigma_c\\bar{D}_s^*$, $\\Sigma_c^*\\bar{D}_s^*$, $\\Xi_c\\bar{D}^*$, $\\Xi_c'\\bar{D}^*$, and $\\Xi_c^*\\bar{D}^*$ interactions with the S-D wave mixing. The Lagrangians with chiral symmetry, heavy quark symmetry, and/or hidden local symmetry are adopted to describe the interactions. With such Lagrangians, it is found that the $\\Lambda_c\\bar{D}_s^*$ and $\\Xi_c\\bar{D}^*$ interactions are forbidden. For the $\\Sigma_c\\bar{D}_s^*$ and $\\Sigma_c^*\\bar{D}_s^*$ systems where the one-pion exchange is forbidden and only one-eta exchange survives, there exist three molecular candidates at cutoffs about 3 GeV, i.e., a $\\Sigma_c\\bar{D}_s^*$ state with quantum number $I(J^P)=1(\\frac{3}{2}^-)$ and $\\Sigma_c^*\\bar{D}_s^*$ states with $1(\\frac{1}{2}^-)$ and $1(\\frac{3}{2}^-)$. For the $\\Xi_c'\\bar{D}^*$ and $\\Xi_c^*\\bar{D}^*$ systems where the one-pion exchange is allow...

  5. The BaBar Data Acquisition System

    CERN Document Server

    Scott, I; Grosso, P; Huffer, M E; O'Grady, C; Russell, J J

    1999-01-01

    The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by ana-lyzing the decays of a very large sample of B and B(Bar) mesons produced at the high luminosity PEP-II accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detec-tor subsystems. Data from the front end electronics is read into commercial VME processors via a custom "Personality Card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data is read out via a non-blocking network switch to a farm of commercial UNIX processors. The current implementation of the BaBar data acquisition sys-tem has been shown to sustain a Level 1 trigger rate of 1.3...

  6. Bar instability in disk-halo systems

    CERN Document Server

    Sellwood, J A

    2016-01-01

    We show that the exponential growth rate of a bar in a stellar disk is substantially greater when the disk is embedded in a live halo than in a rigid one having the same mass distribution. We also find that the vigor of the instability in disk-halo systems varies with the shape of the halo velocity ellipsoid. Disks in rigid halos that are massive enough to be stable by the usual criteria, quickly form bars in isotropic halos and much greater halo mass is needed to avoid a strong bar; thus stability criteria derived for disks in rigid halos do not apply when the halo is responsive. The study presented here is of an idealized family of models with near uniform central rotation and that lack an extended halo; we present more realistic models with extended halos in a companion paper. The puzzle presented by the absence of strong bars in some galaxies having gently rising inner rotation curves is compounded by the results presented here.

  7. Should an infected Nuss bar be removed?

    NARCIS (Netherlands)

    Van Renterghem, KM; von Bismarck, S; Bax, NMA; Fleer, A; Hollwarth, ME

    2005-01-01

    Background: The Nuss procedure is a minimally invasive procedure for correction of pectus excavatum. It involves insertion of a substernal metal bar. A feared complication of any implanted device is infection, which often necessitates removal. The purpose of this report is to describe the authors' e

  8. My Bar Graph Tells a Story

    Science.gov (United States)

    McMillen, Sue; McMillen, Beth

    2010-01-01

    Connecting stories to qualitative coordinate graphs has been suggested as an effective instructional strategy. Even students who are able to "create" bar graphs may struggle to correctly "interpret" them. Giving children opportunities to work with qualitative graphs can help them develop the skills to interpret, describe, and compare information…

  9. Trichomoniasis in the Hawaiian barred dove

    Science.gov (United States)

    Kocan, R.M.; Banko, W.

    1974-01-01

    Two barred doves found in the south Kona district of the island of Hawaii were diagnosed as having trichomoniasis on the basis of gross and microscopic lesions. This brings the confirmed list of columbid species susceptible to natural trichomoniasis to four and is the first report of the disease from columbids in the Hawaiian Islands.

  10. Hiding Solar-Array Bus Bars

    Science.gov (United States)

    Hufnagel, W. F.

    1983-01-01

    End terminals mounted under cells, maximizing usable illuminated area. Reconfigured solar panel bus bars placed under cells, reducing portion of module area not occupied by active silicon. Underside of last cell in string of cells serves as contact for positive bus. Negative tab of last cell in string is wrapped around from top of cell. Tabs are connected to output boards mounted under cells.

  11. A piezo-bar pressure probe

    Science.gov (United States)

    Friend, W. H.; Murphy, C. L.; Shanfield, I.

    1967-01-01

    Piezo-bar pressure type probe measures the impact velocity or pressure of a moving debris cloud. It measures pressures up to 200,000 psi and peak pressures may be recorded with a total pulse duration between 5 and 65 musec.

  12. The effects of bar-spiral coupling on stellar kinematics in the Galaxy

    Science.gov (United States)

    Monari, Giacomo; Famaey, Benoit; Siebert, Arnaud; Grand, Robert J. J.; Kawata, Daisuke; Boily, Christian

    2016-10-01

    We investigate models of the Milky Way disc taking into account simultaneously the bar and a two-armed quasi-static spiral pattern. Away from major resonance overlaps, the mean stellar radial motions in the plane are essentially a linear superposition of the isolated effects of the bar and spirals. Thus, provided the bar is strong enough, even in the presence of spiral arms, these mean radial motions are predominantly affected by the Galactic bar for large-scale velocity fluctuations. This is evident when comparing the peculiar line-of-sight velocity power spectrum of our coupled models with bar-only models. However, we show how forthcoming spectroscopic surveys could disentangle bar-only non-axisymmetric models of the Galaxy from models in which spiral arms have a significant amplitude. We also point out that overlaps of low-order resonances are sufficient to enhance stellar churning within the disc, even when the spirals amplitude is kept constant. Nevertheless, for churning to be truly non-local, stronger or (more likely) transient amplitudes would be needed: otherwise the disc is actually mostly unaffected by churning in the present models. Finally, regarding vertical breathing modes, the combined effect of the bar and spirals on vertical motions is a clear non-linear superposition of the isolated effects of both components, significantly superseding the linear superposition of modes produced by each perturber separately, thereby providing an additional effect to consider when analysing the observed breathing mode of the Galactic disc in the extended solar neighbourhood.

  13. Star formation properties in barred galaxies. III. Statistical study of bar-driven secular evolution using a sample of nearby barred spirals

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhi-Min; Wu, Hong [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Cao, Chen, E-mail: zmzhou@bao.ac.cn, E-mail: hwu@bao.ac.cn, E-mail: caochen@sdu.edu.cn [School of Space Science and Physics, Shandong University at Weihai, Weihai, Shandong 264209 (China)

    2015-01-01

    Stellar bars are important internal drivers of secular evolution in disk galaxies. Using a sample of nearby spiral galaxies with weak and strong bars, we explore the relationships between the star formation feature and stellar bars in galaxies. We find that galaxies with weak bars tend coincide with low concentrical star formation activity, while those with strong bars show a large scatter in the distribution of star formation activity. We find enhanced star formation activity in bulges toward stronger bars, although not predominantly, consistent with previous studies. Our results suggest that different stages of the secular process and many other factors may contribute to the complexity of the secular evolution. In addition, barred galaxies with intense star formation in bars tend to have active star formation in their bulges and disks, and bulges have higher star formation densities than bars and disks, indicating the evolutionary effects of bars. We then derived a possible criterion to quantify the different stages of the bar-driven physical process, while future work is needed because of the uncertainties.

  14. Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

    CERN Document Server

    Aubert, B; Bóna, M; Boutigny, D; Couderc, F; Karyotakis, Yu; Lees, J P; Poireau, V; Tisserand, V; Zghiche, A; Graugès-Pous, E; Palano, A; Chen, J C; Qi, N D; Rong, G; Wang, P; Zhu, Y S; Eigen, G; Ofte, I; Stugu, B; Abrams, G S; Battaglia, M; Brown, D N; Button-Shafer, J; Cahn, R N; Charles, E; Gill, M S; Groysman, Y; Jacobsen, R G; Kadyk, J A; Kerth, L T; Kolomensky, Yu G; Kukartsev, G; Lynch, G; Mir, L M; Oddone, P J; Orimoto, T J; Pripstein, M; Roe, N A; Ronan, M T; Wenzel, W A; Del Amo-Sánchez, P; Barrett, M; Ford, K E; Harrison, T J; Hart, A J; Hawkes, C M; Morgan, S E; Watson, A T; Goetzen, K; Held, T; Koch, H; Lewandowski, B; Pelizaeus, M; Peters, K; Schröder, T; Steinke, M; Boyd, J T; Burke, J P; Cottingham, W N; Walker, D; Çuhadar-Dönszelmann, T; Fulsom, B G; Hearty, C; Knecht, N S; Mattison, T S; McKenna, J A; Khan, A; Kyberd, P; Saleem, M; Sherwood, D J; Teodorescu, L; Blinov, V E; Bukin, A D; Druzhinin, V P; Golubev, V B; Onuchin, A P; Serednyakov, S I; Skovpen, Y I; Solodov, E P; Todyshev, K Y; Best, D S; Bondioli, M; Bruinsma, M; Chao, M; Curry, S; Eschrich, I; Kirkby, D; Lankford, A J; Lund, P; Mandelkern, M A; Mommsen, R K; Röthel, W; Stoker, D P; Abachi, S; Buchanan, C; Foulkes, S D; Gary, J W; Long, O; Shen, B C; Wang, K; Zhang, L; Hill, E J; Paar, H P; Rahatlou, S; Sharma, V; Berryhill, J W; Campagnari, C; Cunha, A; Dahmes, B; Hong, T M; Kovalskyi, D; Richman, J D; Beck, T W; Eisner, A M; Flacco, C J; Heusch, C A; Kroseberg, J; Lockman, W S; Nesom, G; Schalk, T; Schumm, B A; Seiden, A; Spradlin, P; Williams, D C; Wilson, M G; Albert, J; Chen, E; Dvoretskii, A; Hitlin, D G; Narsky, I; Piatenko, T; Porter, F C; Ryd, A; Samuel, A; Andreassen, R; Mancinelli, G; Meadows, B T; Sokoloff, M D; Blanc, F; Bloom, P C; Chen, S; Ford, W T; Hirschauer, J F; Kreisel, A; Nauenberg, U; Olivas, A; Ruddick, W O; Smith, J G; Ulmer, K A; Wagner, S R; Zhang, J; Chen, A; Eckhart, E A; Soffer, A; Toki, W H; Wilson, R J; Winklmeier, F; Zeng, Q; Altenburg, D D; Feltresi, E; Hauke, A; Jasper, H; Petzold, A; Spaan, B; Brandt, T; Klose, V; Lacker, H M; Mader, W F; Nogowski, R; Schubert, J; Schubert, K R; Schwierz, R; Sundermann, J E; Volk, A; Bernard, D; Bonneaud, G R; Grenier, P; Latour, E; Thiebaux, C; Verderi, M; Bard, D J; Clark, P J; Gradl, W; Muheim, F; Playfer, S; Robertson, A I; Xie, Y; Andreotti, M; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Luppi, E; Negrini, M; Petrella, A; Piemontese, L; Prencipe, E; Anulli, F; Baldini-Ferroli, R; Calcaterra, A; De Sangro, R; Finocchiaro, G; Pacetti, S; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Buzzo, A; Capra, R; Contri, R; Lo Vetere, M; Macri, M M; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Santroni, A; Tosi, S; Brandenburg, G; Chaisanguanthum, K S; Morii, M; Wu, J; Dubitzky, R S; Marks, J; Schenk, S; Uwer, U; Bhimji, W; Bowerman, D A; Dauncey, P D; Egede, U; Flack, R L; Nash, J A; Nikolich, M B; Panduro-Vazquez, W; Chai, X; Charles, M J; Mallik, U; Meyer, N T; Ziegler, V; Cochran, J; Crawley, H B; Dong, L; Eyges, V; Meyer, W T; Prell, S; Rosenberg, E I; Rubin, A E; Gritsan, A V; Fritsch, M; Schott, G; Arnaud, N; Davier, M; Grosdidier, G; Höcker, A; Le Diberder, F R; Lepeltier, V; Lutz, A M; Oyanguren, A; Pruvot, S; Rodier, S; Roudeau, P; Schune, M H; Stocchi, A; Wang, W F; Wormser, G; Cheng, C H; Lange, D J; Wright, D M; Chavez, C A; Forster, I J; Fry, J R; Gabathuler, E; Gamet, R; George, K A; Hutchcroft, D E; Payne, D J; Schofield, K C; Touramanis, C; Bevan, A J; Di Lodovico, F; Menges, W; Sacco, R; Cowan, G; Flächer, H U; Hopkins, D A; Jackson, P S; McMahon, T R; Ricciardi, S; Salvatore, F; Wren, A C; Davis, C L; Allison, J; Barlow, N R; Barlow, R J; Chia, Y M; Edgar, C L; Lafferty, G D; Naisbit, M T; Williams, J C; Yi, J I; Chen, C; Hulsbergen, W D; Jawahery, A; Lae, C K; Roberts, D A; Simi, G; Blaylock, G; Dallapiccola, C; Hertzbach, S S; Li, X; Moore, T B; Saremi, S; Stängle, H; Willocq, S Y; Cowan, R; Sciolla, G; Sekula, S J; Spitznagel, M; Taylor, F; Yamamoto, R K; Kim, H; Patel, P M; Robertson, S H; Lazzaro, A; Lombardo, V; Palombo, F; Bauer, J M; Cremaldi, L; Eschenburg, V; Godang, R; Kroeger, R; Sanders, D A; Summers, D J; Zhao, H W; Brunet, S; Côte, D; Taras, P; Viaud, F B; Nicholson, H; Cavallo, N; De Nardo, Gallieno; Fabozzi, F; Gatto, C; Lista, L; Monorchio, D; Paolucci, P; Piccolo, D; Sciacca, C; Baak, M; Raven, G; Snoek, H L; Jessop, C P; LoSecco, J M; Allmendinger, T; Benelli, G; Gan, K K; Honscheid, K; Hufnagel, D; Jackson, P D; Kagan, H; Kass, R; Rahimi, A M; Ter-Antonian, R; Wong, Q K; Blount, N L; Brau, J E; Frey, R; Igonkina, O; Lu, M; Potter, C T; Rahmat, R; Sinev, N B; Strom, D; Strube, J; Torrence, E; Galeazzi, F; Gaz, A; Margoni, M; Morandin, M; Pompili, A; Posocco, M; Rotondo, M; Simonetto, F; Stroili, R; Voci, C; Benayoun, M; Chauveau, J; David, P; Del Buono, L; La Vaissière, C de; Hamon, O; Hartfiel, B L; John, M J J; Malcles, J; Ocariz, J; Roos, L; Therin, G; Behera, P K; Gladney, L; Panetta, J; Biasini, M; Covarelli, R; Pioppi, M; Angelini, C; Batignani, G; Bettarini, S; Bucci, F; Calderini, G; Carpinelli, M; Cenci, R; Forti, F; Giorgi, M A; Lusiani, A; Marchiori, G; Mazur, M A; Morganti, M; Neri, N; Rizzo, G; Walsh, J; Haire, M; Judd, D; Wagoner, D E; Biesiada, J; Danielson, N; Elmer, P; Lau, Y P; Lü, C; Olsen, J; Smith, A J S; Telnov, A V; Bellini, F; Cavoto, G; D'Orazio, A; Del Re, D; Di Marco, E; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Li Gioi, L; Mazzoni, M A; Morganti, S; Piredda, G; Polci, F; Safai-Tehrani, F; Voena, C; Ebert, M; Schröder, H; Waldi, R; Adye, T; De Groot, N; Franek, B; Olaiya, E O; Wilson, F F; Emery, S; Gaidot, A; Ganzhur, S F; Hamel de Monchenault, G; Kozanecki, Witold; Legendre, M; Vasseur, G; Yéche, C; Zito, M; Chen, X R; Liu, H; Park, W; Purohit, M V; Wilson, J R; Allen, M T; Aston, D; Bartoldus, R; Bechtle, P; Berger, N; Boyarski, A M; Claus, R; Coleman, J P; Convery, M R; Cristinziani, M; Dingfelder, J C; Dorfan, J; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Field, R C; Glanzman, T; Gowdy, S J; Graham, M T; Halyo, V; Hast, C; Hrynóva, T; Innes, W R; Kelsey, M H; Kim, P; Leith, D W G S; Li, S; Luitz, S; Lüth, V; Lynch, H L; MacFarlane, D B; Marsiske, H; Messner, R; Müller, D R; O'Grady, C P; Ozcan, V E; Perazzo, A; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Schwiening, J; Snyder, A; Stelzer, J; Su, D; Sullivan, M K; Suzuki, K; Swain, S K; Thompson, J M; Vavra, J; Van Bakel, N; Weaver, M; Weinstein, A J R; Wisniewski, W J; Wittgen, M; Wright, D H; Yarritu, A K; Yi, K; Young, C C; Burchat, P R; Edwards, A J; Majewski, S A; Petersen, B A; Roat, C; Wilden, L; Ahmed, S; Alam, M S; Bula, R; Ernst, J A; Jain, V; Pan, B; Saeed, M A; Wappler, F R; Zain, S B; Bugg, W; Krishnamurthy, M; Spanier, S M; Eckmann, R; Ritchie, J L; Satpathy, A; Schilling, C J; Schwitters, R F; Izen, J M; Kitayama, I; Lou, X C; Ye, S; Bianchi, F; Gallo, F; Gamba, D; Bomben, M; Bosisio, L; Cartaro, C; Cossutti, F; Della Ricca, G; Dittongo, S; Grancagnolo, S; Lanceri, L; Vitale, L; Martínez-Vidal, F; Azzolini, V; Banerjee, S; Bhuyan, B; Brown, C M; Fortin, D; Hamano, K; Kowalewski, R V; Nugent, I M; Roney, J M; Sobie, R J; Back, J J; Harrison, P F; Latham, T E; Mohanty, G B; Pappagallo, M; Band, H R; Chen, X; Cheng, B; Dasu, S; Datta, M; Flood, K T; Hollar, J J; Kutter, P E; Mellado, B; Mihályi, A; Pan, Y; Pierini, M; Prepost, R; Wu, S L; Yu, Z; Neal, H

    2006-01-01

    We present a search for the decay of a B0 or B0bar meson to a K*0bar K0 or K*0 K0bar final state, using a sample of approximately 232 million BBbar events collected with the BABAR detector at the PEP-II asymmetric energy e+e- collider at SLAC. The measured branching fraction is B(B0 --> K*0bar K0) + B(B0 --> K*0 K0bar) = (0.2+0.9-0.8+0.1-0.3)x 10-6. We obtain the following upper limit for the branching fraction at 90% confidence level: B(B0 --> K*0bar K0) + B(B0 --> K*0 K0bar) phi K0 from sin(2beta).

  15. Explicit solution for vibrating bar with viscous boundaries and internal damper

    CERN Document Server

    Jovanovic, Vojin

    2011-01-01

    We investigate longitudinal vibrations of a bar subjected to viscous boundary conditions at each end, and an internal damper at an arbitrary point along the bar's length. The system is described by four independent parameters and exhibits a variety of behaviors including rigid motion, super stability/instability and zero damping. The solution is obtained by applying the Laplace transform to the equation of motion and computing the Green's function of the transformed problem. This leads to an unconventional eigenvalue-like problem with the spectral variable in the boundary conditions. The eigenmodes of the problem are necessarily complex-valued and are not orthogonal in the usual inner product. Nonetheless, in generic cases we obtain an explicit eigenmode expansion for the response of the bar to initial conditions and external force. For some special values of parameters the system of eigenmodes may become incomplete, or no non-trivial eigenmodes may exist at all. We thoroughly analyze physical and mathematica...

  16. Microstructure control techniques in primary hot working of titanium alloy bars:A review

    Institute of Scientific and Technical Information of China (English)

    Guo Lianggang; Fan Xiaoguang; Yu Gaofeng; Yang He

    2016-01-01

    How to control the microstructure of titanium alloy bars is important to fabricating high-performance aerial forgings. This paper gives a thorough survey of the manufacturing meth-ods and microstructure control techniques for titanium alloy bars. It summarizes the effects of pro-cessing parameters on the mechanisms and laws of microstructure evolution during b working and (a+b) working, including the kinetics and grains size of dynamic recrystallization (DRX) during b deformation and the kinetics and grains size of spheroidization during (a+b) deformation. The trends in microstructure control techniques are presented for fabricating titanium alloy bars with high efficiency, low cost, and high quality by means of b/(a+b) working, and the puzzles and chal-lenges in the future are also pointed out.

  17. Effect of bar sealing parameters on OPP/MCPP heat seal strength

    Directory of Open Access Journals (Sweden)

    2007-11-01

    Full Text Available The effect of bar sealing parameters on the heat seal strength of oriented polypropylene (OPP/metallic cast polypropylene (MCPP laminate film was investigated. Based on the results obtained from the parametric study, a bar sealing process window was developed. All points drop within the process window are combinations of platen temperature and dwell time that produce acceptable heat seal. Optimum combinations are indicated by the lower border of the window. The plateau initiation temperature, Tpi of OPP/MCPP laminate film used in the present study occurred before the final melting temperature, Tmf of the sealant material. The highest achievable heat seal strength was at the plateau region, and the corresponding failure modes were delaminating, tearing or combine failure modes (delaminating and tearing. Minimum pressure level of 1.25 bars is necessary to bring the laminate interface into intimate contact in order to effect sealing.

  18. Study of psi(2S) Decays to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} and Search for p bar{p} Threshold Enhancements

    CERN Document Server

    Alexander, J P; Das, S; Ehrlich, R; Fields, L; Gibbons, L; Gray, S W; Hartill, D L; Heltsley, B K; Kreinick, D L; Kuznetsov, V E; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Sun, W M; Yelton, J; Rubin, P; Lowrey, N; Mehrabyan, S; Selen, M; Wiss, J; Adams, S; Kornicer, M; Mitchell, R E; Shepherd, M R; Tarbert, C M; Besson, D; Pedlar, T K; Xavier, J; Cronin-Hennessy, D; Hietala, J; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Tomaradze, A; Xiao, T; Brisbane, S; Libby, J; Martin, L; Powell, A; Spradlin, P; Wilkinson, G; Mendez, H; Ge, J Y; Miller, D H; Shipsey, I P J; Xin, B; Adams, G S; Hu, D; Moziak, B; Napolitano, J; Ecklund, K M; Insler, J; Muramatsu, H; Park, C S; Pearson, L J; Thorndike, E H; Yang, F; Ricciardi, S; Thomas, C; Artuso, M; Blusk, S; Mountain, R; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M; Bonvicini, G; Cinabro, D; Lincoln, A; Smith, M J; Zhou, P; Zhu, J; Naik, P; Rademacker, J; Asner, D M; Edwards, K W; Randrianarivony, K; Tatishvili, G; Briere, R A; Vogel, H; Onyisi, P U E; Rosner, J L

    2010-01-01

    The decays of psi(2S) into gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been studied with the CLEO-c detector using a sample of 24.5 million psi(2S) events obtained from e^+e^- annihilations at sqrt{s} = 3686 MeV. The data show evidence for the excitation of several N^* resonances in p pi^0 and p eta channels in pi^0 p bar{p} and eta p bar{p} decays, and f_2 states in gamma p bar{p} decay. Branching fractions for decays of psi(2S) to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been determined. No evidence for p bar{p} threshold enhancements was found in the reactions psi(2S)-> X p bar{p}, where X = gamma, pi^0, eta. We do, however, find confirming evidence for a p bar{p} threshold enhancement in J/psi-> gamma p bar{p} as previously reported by BES.

  19. The Morphology of Collisionless Galactic Rings Exterior to Evolving Bars

    CERN Document Server

    Bagley, Micaela; Quillen, Alice C

    2008-01-01

    The morphology of the outer rings of early-type spiral galaxies is compared to integrations of massless collisionless particles initially in nearly circular orbits. Particles are perturbed by a quadrupolar gravitational potential corresponding to a growing and secularly evolving bar. We find that outer rings with R1R2 morphology and pseudorings are exhibited by the simulations even though they lack gaseous dissipation. Simulations with stronger bars form pseudorings earlier and more quickly than those with weaker bars. We find that the R1 ring, perpendicular to the bar, is fragile and dissolves after a few bar rotation periods if the bar pattern speed increases by more than ~ 8%, bar strength increases (by >~ 140%) after bar growth, or the bar is too strong (Q_T>0.3). If the bar slows down after formation, pseudoring morphology persists and the R2 ring perpendicular to the bar is populated due to resonance capture. The R2 ring remains misaligned with the bar and increases in ellipticity as the bar slows down....

  20. Counter-Narratives and the Unrehearsed Stories Counter-Terrorists Unwittingly Produce

    Directory of Open Access Journals (Sweden)

    Beatrice de Graaf

    2010-11-01

    Full Text Available Governments produce both deliberate and involuntary (and less conscious narratives when countering terrorism. The thesis of this article is that such unintended messages can be much more powerful and consequential than is realized; in fact, they can completely contradict the intended official 'counter-narrative'. To substantiate this hypothesis, the author looks at the experience of the German Federal Republic in the 1970s and beyond when state and society were confronted with the Red Army Faction (RAF and similar left-wing "revolutionaries" like those of the 2nd of June Movement or the Red Zora.

  1. Fixed and periodic points in the probabilistic normed and metric spaces

    Energy Technology Data Exchange (ETDEWEB)

    Ghaemi, M.B. [Department of Mathematics, Faculty of Science, Imam Khomeini International University, P.O. Box 34194-288, Qazvin (Iran, Islamic Republic of) and Faculty of Mathematics, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)]. E-mail: M-Ghaemi@sbu.ac.ir; Razani, Abdolrahman [Department of Mathematics, Faculty of Science, Imam Khomeini International University, P.O. Box 34194-288, Qazvin (Iran, Islamic Republic of) and Department of Mathematics, Faculty of Science, Imam Khomeini International University, P.O. Box 34194-288, Qazvin (Iran, Islamic Republic of)]. E-mail: razani@ikiu.ac.ir

    2006-06-15

    In this paper, a fixed point theorem is proved, i.e., if A is a C-contraction in the Menger space (S,F) and E-bar S be such that A(E)-bar is compact, then A has a fixed point. In addition, under the same condition, the existence of a periodic point of A is proved. Finally, a fixed point theorem in probabilistic normed spaces is proved.

  2. Some Comments on the Branching Ratios for n-bar p Annihilation into pipi, KK-bar , and pieta Channels

    Science.gov (United States)

    Kudryavtsev, A. E.

    2000-11-01

    We give some remarks on the $\\bar n p$-partial branching ratios in flight at low momenta of antineutron, measured by OBELIX collaboration. The comparison is made to the known branching ratios from the $p \\bar p$-atomic states. The branching ratio for the reaction $\\bar n p \\to \\pi^+\\pi^0$ is found to be suppressed in comparison to what follows from the $ p \\bar p$-data. It is also shown, that there is no so called dynamic I=0-amplitude suppression for the process $N\\bar N \\to K\\bar K$.

  3. X(5568) as a {su}\\bar{d}\\bar{b} tetraquark in a simple quark model

    Science.gov (United States)

    Stancu, Fl

    2016-10-01

    The S-wave eigenstates of tetraquarks of type {su}\\bar{d}\\bar{b} with J P = 0+, 1+ and 2+ are studied within a simple quark model with chromomagnetic interaction and effective quark masses extracted from meson and baryon spectra. It is tempting to see if this spectrum can accommodate the new narrow structure X(5568), observed by the DØ Collaboration, but not confirmed by the LHCb Collaboration. If it exists, such a tetraquark is a system with four different flavors and its study can improve our understanding of multiquark systems. The presently calculated mass of X(5568) agrees quite well with the experimental value of the DØ Collaboration. Predictions are also made for the spectrum of the charmed partner {su}\\bar{d}\\bar{c}. However we are aware of the difficulty of extracting effective quark masses, from mesons and baryons, to be used in multiquark systems.

  4. Nucleon strange $s\\bar s$ asymmetry to the $\\Lambda/\\bar\\Lambda$ fragmentation

    CERN Document Server

    Chi, Yujie; Ma, Bo-Qiang

    2014-01-01

    The difference between the $\\Lambda$ and $\\bar \\Lambda$ longitudinal spin transfers in the semi-inclusive deep inelastic scattering process is intensively studied. The study is performed in the current fragmentation region, by considering the intermediate hyperon decay processes and sea quark fragmentation processes, while the strange sea $s\\bar s$ asymmetry in the nucleon is taken into account. The calculation in the light-cone quark-diquark model shows that the strange sea asymmetry gives a proper trend to the difference between the $\\Lambda$ and $\\bar \\Lambda$ longitudinal spin transfers. When considering the nonzero final hadron transverse momentum, our results can explain the COMPASS data reasonably. The nonzero final hadron transverse momentum is interpreted as a natural constraint to the final hadron $z$ range where the longitudinal spin transfer is more sensitive to the strange sea $s\\bar s$ asymmetry.

  5. Manufacturing cereal bars with high nutritional value through experimental design

    Directory of Open Access Journals (Sweden)

    Roberta Covino

    2015-01-01

    Full Text Available Organizations responsible for public health throughout the world have been increasingly worrying about how to feed populations encouraging a nutritious and balanced diet in order to decrease the occurrence of chronic diseases, which are constantly related to an inadequate diet. Still, due to matters of modern lifestyle consumers are increasingly seeking convenient products. This being so, cereal bars have been an option when the matter is low calorie fast food which is also source of fiber. This study aimed at developing a cereal bar with high dietary fiber, iron, vitamins A and vitamin E, in order to easily enable adult population achieve the daily recommendation for such nutrients. Eight formulations plus the focal point were conducted through experimental planning; sensory analysis with 110 tasters for each block and texture. Afterwards, we conducted centesimal analysis for all three formulations presenting the best sensory results. After statistical analysis and comparison to the means for products available in the market, it was possible to conclude that the product developed presented great acceptance and fiber level more than twice as much as the means for commercial products.

  6. Application of Cu-Al-Mn superelastic alloy bars as reinforcement elements in concrete beams

    Science.gov (United States)

    Shrestha, Kshitij C.; Araki, Yoshikazu; Nagae, Takuya; Yano, Hayato; Koetaka, Yuji; Omori, Toshihiro; Sutou, Yuji; Kainuma, Ryosuke; Ishida, Kiyohito

    2012-04-01

    Experimental works are done to assess the seismic behavior of concrete beams reinforced with superelastic alloy (SEA) bars. Applicability of newly developed Cu-Al-Mn SEA bars, characterized by large recovery strain, low material cost, and high machinability, have been proposed as partial replacements for conventional steel bars in order to reduce residual deformations in structures during and after intense earthquakes. Four-point reverse-cyclic bending tests were done on 1/3 scale concrete beams comprising three different types of specimens - conventional steel reinforced concrete (ST-RC), SEA reinforced concrete (SEA-RC), and SEA reinforced concrete with pre-tensioning (SEA-PC). The results showed that SEA reinforced concrete beams demonstrated significant enhancement in crack recovery capacity in comparison to steel reinforced beam. Average recovery of cracks for each of the specimens was 21% for ST-RC, 84% for SEA-RC, and 86% for SEA-PC. In addition, SEA-RC and SEA-PC beams demonstrated strong capability of recentering with comparable normalized strength and ductility relative to conventional ST-RC beam specimen. ST-RC beam, on the other hand, showed large residual cracks due to progressive reduction in its re-centering capability with each cycle. Both the SEA-RC and SEA-PC specimens demonstrated superiority of Cu-Al-Mn SEA bars to conventional steel reinforcing bars as reinforcement elements.

  7. Moment-Curvature Behaviors of Concrete Beams Singly Reinforced by Steel-FRP Composite Bars

    Directory of Open Access Journals (Sweden)

    Zeyang Sun

    2017-01-01

    Full Text Available A steel-fiber-reinforced polymer (FRP composite bar (SFCB is a kind of rebar with inner steel bar wrapped by FRP, which can achieve a better anticorrosion performance than that of ordinary steel bar. The high ultimate strength of FRP can also provide a significant increase in load bearing capacity. Based on the adequate simulation of the load-displacement behaviors of concrete beams reinforced by SFCBs, a parametric analysis of the moment-curvature behaviors of concrete beams that are singly reinforced by SFCB was conducted. The critical reinforcement ratio for differentiating the beam’s failure mode was presented, and the concept of the maximum possible peak curvature (MPPC was proposed. After the ultimate curvature reached MPPC, it decreased with an increase in the postyield stiffness ratio (rsf, and the theoretical calculation method about the curvatures before and after the MPPC was derived. The influence of the reinforcement ratio, effective depth, and FRP ultimate strain on the ultimate point was studied by the dimensionless moment and curvature. By calculating the envelope area under the moment-curvature curve, the energy ductility index can obtain a balance between the bearing capacity and the deformation ability. This paper can provide a reference for the design of concrete beams that are reinforced by SFCB or hybrid steel bar/FRP bar.

  8. Gas dynamics in the Milky Way: the nuclear bar and the 3-kpc arms

    CERN Document Server

    Rodríguez-Fernández, N J

    2009-01-01

    We discuss the results of the first model of the gas dynamics in the Milky Way in the presence of two bars: the large scale primary bar or boxy bulge and a secondary bar in the Galactic center region. We have obtained an accurate potential by modeling 2MASS star counts and we have used this potential to simulate the gas dynamics. As a first approximation we have used one single pattern speed \\Omega_p. The models with Omega_p=30-40 \\kmskpc and a primary bar orientation of 20-35 deg reproduce successfully many characteristics of the observed longitude-velocity diagrams as the terminal velocity curve or the spiral arm tangent points. The Galactic Molecular Ring is not an actual ring but the inner part of the spiral arms, within corotation. The model reproduces quantitatively the "3-kpc arm" and the recently found far-side counterpart, which are the lateral arms that contour the bar. In the Galactic center region, the model reproduces the 1-kpc HI ring and the Central Molecular Zone (CMZ), which is the gas respon...

  9. The BaLROG project - I. Quantifying the influence of bars on the kinematics of nearby galaxies

    CERN Document Server

    Seidel, M K; Martínez-Valpuesta, I; Díaz-García, S; Laurikainen, E; Salo, H; Knapen, J H

    2015-01-01

    We present the BaLROG (Bars in Low Redshift Optical Galaxies) sample of 16 morphologically distinct barred spirals to characterise observationally the influence of bars on nearby galaxies. Each galaxy is a mosaic of several pointings observed with the IFU spectrograph SAURON leading to a tenfold sharper spatial resolution (~100 pc) compared to ongoing IFU surveys. In this paper we focus on the kinematic properties. We calculate the bar strength Qb from classical torque analysis using 3.6 {\\mu}m Spitzer (S4G) images, but also develop a new method based solely on the kinematics. A correlation between the two measurements is found and backed up by N-body simulations, verifying the measurement of Qb . We find that bar strengths from ionised gas kinematics are ~2.5 larger than those measured from stellar kinematics and that stronger bars have enhanced influence on inner kinematic features. We detect that stellar angular momentum "dips" at 0.2$\\pm$0.1 bar lengths and half of our sample exhibits an anti-correlation ...

  10. Calculations of bar K-nuclear quasi-bound states using chiral bar KN amplitudes

    Science.gov (United States)

    Mareš, J.; Barnea, N.; Cieplý, A.; Friedman, E.; Gal, A.; Gazda, D.

    2014-03-01

    We review our recent calculations of K- quasi-bound states in nuclear systems using subthreshold energy dependent chiral bar KN amplitudes. Strong energy dependence of the scattering amplitudes requires self-consistent evaluation of the involved bar KN interactions. In view of sizable widths predicted by our calculations, an unambiguous identification of K--nuclear quasi-bound states in ongoing experimental searches would be difficult.

  11. Rare kaon decays: $K^{+} → ^{+} \\bar{}$ and future

    Indian Academy of Sciences (India)

    Bipul Bhuyan

    2004-03-01

    The experimental progress in the search for $K^{+} → ^{+} \\bar{}$ will be presented in this paper. Also the physics potential of the proposed BNL experiment to search for $K_{L}^{0} → ^{0} \\bar{}$ (KOPIO) will be discussed.

  12. Verification of Properties of Concrete Reinforcement Bars: Nigeria ...

    African Journals Online (AJOL)

    Nekky Umera

    from the producing mills but purchase them as groups of single bars from the ... determining the extent to which they conform to the requirements of. International ... the most widely used bar sizes for the local concrete reinforcement needs.

  13. Bond tests of fiberglass-reinforced plastic bars in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Larralde, J.; Silva-Rodriquez, R.; Burdette, J.; Harris, B. (Drexel Univ., Philadelphia, PA (United States). Civil and Architectural Engineering Dept.)

    1994-07-01

    Fiberglass Reinforced Plastic (FRP) bars for concrete reinforcement have been commercially available for several years. The main advantage of such bar relative to the conventional steel reinforcing bars is their resistance to corrosion. The reinforced plastic bars are slightly different from the conventional steel bars both geometrically and mechanically. Thus, research is needed to understand their behavior and to be able to use them in concrete reinforcement with adequate reliability. Bond strength of reinforced plastic bars in concrete is one of the mechanical and behavioral differences with the steel bars. This paper presents the results of pullout and beam tests conducted to determine the bond stress-slip behavior of FRP bars in concrete.

  14. Osmundiron, cleaved iron bars and slags (Osmundjern, kloder og kalotslagger)

    DEFF Research Database (Denmark)

    Buchwald, Vagn Fabritius

    1996-01-01

    Investigation of so-called Osmund iron, iron bars and slags from iron production in the medieval ages.......Investigation of so-called Osmund iron, iron bars and slags from iron production in the medieval ages....

  15. PRELIMINARY PROGRAMMED WHOLE—BODY COUNTER

    Institute of Scientific and Technical Information of China (English)

    张少东; 郑文忠; 等

    1995-01-01

    It is capable of giving the initial intakes of radionuclides and the assessment quantitites used in radiation protection according to its measured results of radionuclides in vivo.It is accomplished by providing the software of controlling,interface and internal dose estimation programs to the original iron cabin shielding whole-body counter.The preliminary application shows that its data processing is rapid and correct,and can meet the requirement of rapid internal radioactive contamination monitoring and diagnosing in case of lots of internal contamination subjects happened in nuclear accident.

  16. Taxing junk food to counter obesity.

    Science.gov (United States)

    Franck, Caroline; Grandi, Sonia M; Eisenberg, Mark J

    2013-11-01

    We examined the advantages and disadvantages of implementing a junk food tax as an intervention to counter increasing obesity in North America. Small excise taxes are likely to yield substantial revenue but are unlikely to affect obesity rates. High excise taxes are likely to have a direct impact on weight in at-risk populations but are less likely to be politically palatable or sustainable. Ultimately, the effectiveness of earmarked health programs and subsidies is likely to be a key determinant of tax success in the fight against obesity.

  17. Shared address collectives using counter mechanisms

    Science.gov (United States)

    Blocksome, Michael; Dozsa, Gabor; Gooding, Thomas M; Heidelberger, Philip; Kumar, Sameer; Mamidala, Amith R; Miller, Douglas

    2014-02-18

    A shared address space on a compute node stores data received from a network and data to transmit to the network. The shared address space includes an application buffer that can be directly operated upon by a plurality of processes, for instance, running on different cores on the compute node. A shared counter is used for one or more of signaling arrival of the data across the plurality of processes running on the compute node, signaling completion of an operation performed by one or more of the plurality of processes, obtaining reservation slots by one or more of the plurality of processes, or combinations thereof.

  18. Cerenkov counter for the experiment NA3

    CERN Multimedia

    1978-01-01

    The program of the NA3 experiment included the study of hadronic interactions with a large transverse momentum pT, thus the inclusion in the set-up of three gas threshold Cerenkov counters of large acceptance. The photo shows the downstream part of the second Cerenkov (located at the output of the magnet). The yellow membrane is a temporary protection for the optics (shown in photo 7810540X) to be taken away when fixing this part to the gas tank (entering the magnet and not shown). The photomultipliers all around are heavily shielded.

  19. The multimodal argumentation of persuasive counter discourses

    DEFF Research Database (Denmark)

    Maier, Carmen Daniela

    are given prominence in the argumentation by examining their complex interplay and functional differentiation. The ways in which speech, writing and images articulate the counter discourse occupy a central position in the analysis. A special focus is put on the multimodal configuration of specific...... and new multimodal ways of discussing them. References Kress, G. 2010. Multimodality. A Social Semiotic Approach to Contemporary Communication. London: Routledge. Van Leeuwen, Theo. 2008. Discourse and Practice. New Tools for Critical Discourse Analysis. Oxford: Oxford University Press. Chouliaraki, L...

  20. Industrial espionage and technical surveillance counter measurers

    CERN Document Server

    Androulidakis, Iosif

    2016-01-01

    This book examines technical aspects of industrial espionage and its impact in modern companies, organizations, and individuals while emphasizing the importance of intellectual property in the information era. The authors discuss the problem itself and then provide statistics and real world cases. The main contribution provides a detailed discussion of the actual equipment, tools and techniques concerning technical surveillance in the framework of espionage. Moreover, they present the best practices and methods of detection (technical surveillance counter measures) as well as means of intellectual property protection.

  1. Working With Embroideries and Counter-Maps: Engaging Memory and Imagination Within Decolonizing Frameworks

    Directory of Open Access Journals (Sweden)

    Puleng Segalo

    2015-08-01

    Full Text Available As people around the world continue to have their voices, desires, and movements restricted, and their pasts and futures told on their behalf, we are interested in the critical project of decolonizing, which involves contesting dominant narratives and hegemonic representations. Ignacio Martín-Baró called these the “collective lies” told about people and politics. This essay reflects within and across two sites of injustice, located in Israel/Palestine and in South Africa, to excavate the circuits of structural violence, internalized colonization and possible reworking of those toward resistance that can be revealed within the stubborn particulars of place, history, and culture. The projects presented here are locally rooted, site-specific inquiries into contexts that bear the brunt of colonialism, dispossession, and occupation. Using visual research methodologies such as embroideries that produce counter-narratives and counter-maps that divulge the complexity of land-struggles, we search for fitting research practices that amplify unheard voices and excavate the social psychological soil that grows critical analysis and resistance. We discuss here the practices and dilemmas of doing decolonial research and highlight the need for research that excavates the specifics of a historical material context and produces evidence of previously silenced narratives.

  2. $\\bar{D}\\Sigma^*_c$ and $\\bar{D}^*\\Sigma_c$ interactions and LHCb pentaquarks

    CERN Document Server

    He, Jun

    2016-01-01

    Recently, LHCb collaboration reported the observation of two hidden-charmed resonances $P_c(4380)$ and $P_c(4450)$ consistent with hidden-charmed pentaquarks. We perform a dynamical investigation about the $\\bar{D}\\Sigma_c^*(2520)$ and $\\bar{D}^*\\Sigma_c(2455)$ interactions which are described by the meson exchanges in a quasipotential Bethe-Salpeter equation approach. Two poles around $4450$ and $4390$ MeV are produced from the $\\bar{D}^*\\Sigma_c(2455)$ interaction with spin parities $3/2^-$ and $5/2^+$, respectively. The peak for $5/2^+$ state has a comparable hight as that of $3/2^-$ state in the $J/\\psi p$ invariant mass spectrum. Another bound state with spin-parity $J^P=3/2^-$ is produced from the $\\bar{D}\\Sigma^*_c(2520)$ interaction. Such results suggest that the narrower LHCb pentaquark $P_c(4450)$ can be well interpreted as a $5/2^+$ $\\bar{D}^*\\Sigma_c(2455)$ molecular state while the $P_c(4380)$ is a $3/2^-$ $\\bar{D}^*\\Sigma_c(2455)$ molecular state mixed with other secondary origins.

  3. Bar pattern speeds in CALIFA galaxies: I. Fast bars across the Hubble sequence

    CERN Document Server

    Aguerri, J A L; Falcón-Barroso, J; Amorin, A; Barrera-Ballesteros, J; Fernandes, R Cid; García-Benito, R; García-Lorenzo, B; Delgado, R M González; Husemann, B; Kalinova, V; Lyubenova, M; Marino, R A; Márquez, I; Mast, D; Pérez, E; Sánchez, S F; van de Ven, G; Walcher, C J; Backsmann, N; Cortijo-Ferrero, C; Bland-Hawthorn, J; del Olmo, A; Iglesias-Páramo, J; Pérez, I; Sánchez-Blázquez, P; Wisotzki, L; Ziegler, B

    2015-01-01

    The bar pattern speed ($\\Omega_{\\rm b}$) is defined as the rotational frequency of the bar, and it determines the bar dynamics. Several methods have been proposed for measuring $\\Omega_{\\rm b}$. The non-parametric method proposed by Tremaine \\& Weinberg (1984; TW) and based on stellar kinematics is the most accurate. This method has been applied so far to 17 galaxies, most of them SB0 and SBa types. We have applied the TW method to a new sample of 15 strong and bright barred galaxies, spanning a wide range of morphological types from SB0 to SBbc. Combining our analysis with previous studies, we investigate 32 barred galaxies with their pattern speed measured by the TW method. The resulting total sample of barred galaxies allows us to study the dependence of $\\Omega_{\\rm b}$ on galaxy properties, such as the Hubble type. We measured $\\Omega_{\\rm b}$ using the TW method on the stellar velocity maps provided by the integral-field spectroscopy data from the CALIFA survey. Integral-field data solve the problem...

  4. Orthogonal Vertical Velocity Dispersion Distributions Produced by Bars

    Science.gov (United States)

    Du, Min; Shen, Juntai; Debattista, Victor P.; de Lorenzo-Cáceres, Adriana

    2017-02-01

    In barred galaxies, the contours of stellar velocity dispersions (σ) are generally expected to be oval and aligned with the orientation of bars. However, many double-barred (S2B) galaxies exhibit distinct σ peaks on the minor axis of the inner bar, which we termed “σ-humps,” while two local σ minima are present close to the ends of inner bars, i.e., “σ-hollows.” Analysis of numerical simulations shows that {σ }z-humps or hollows should play an important role in generating the observed σ-humps+hollows in low-inclination galaxies. In order to systematically investigate the properties of {σ }z in barred galaxies, we apply the vertical Jeans equation to a group of well-designed three-dimensional bar+disk(+bulge) models. A vertically thin bar can lower {σ }z along the bar and enhance it perpendicular to the bar, thus generating {σ }z-humps+hollows. Such a result suggests that {σ }z-humps+hollows can be generated by the purely dynamical response of stars in the presence of a sufficiently massive, vertically thin bar, even without an outer bar. Using self-consistent N-body simulations, we verify the existence of vertically thin bars in the nuclear-barred and S2B models that generate prominent σ-humps+hollows. Thus, the ubiquitous presence of σ-humps+hollows in S2Bs implies that inner bars are vertically thin. The addition of a bulge makes the {σ }z-humps more ambiguous and thus tends to somewhat hide the {σ }z-humps+hollows. We show that {σ }z may be used as a kinematic diagnostic of stellar components that have different thicknesses, providing a direct perspective on the morphology and thickness of nearly face-on bars and bulges with integral field unit spectroscopy.

  5. Development of omega-3 rich energy bar with flaxseed

    OpenAIRE

    Mridula, D.; Singh, K. K.; Barnwal, P.

    2011-01-01

    Energy bar sample were prepared with different levels of flaxseed (0–20%) in addition to cereals and pulses with varying levels of sweeteners (45, 50, and 55%) to deliver a nutritious food to the consumer. The developed bars were evaluated for textural, colour, nutritional quality, sensory attributes and total microbial load. Different levels of flaxseed and sweeteners significantly affected the hue and chroma values of the energy bar. In general the level of flaxseed in energy bar did not af...

  6. Possible $B^{(\\ast)} \\bar{K}$ hadronic molecule state

    CERN Document Server

    Xiao, Cheng-Jian

    2016-01-01

    In the present work, we estimate the decays of the $X(5568)$ and $X(5616)$ in a $B \\bar{K}$ and a $B^\\ast \\bar{K}$ $S$-wave hadronic molecule scenarios, respectively, which may corresponding to the structure observed by D0 Collaboration. Our estimation indicates both $B\\bar{K}$ and $B^\\ast \\bar{K}$ hadronic molecule decay widths could explain the experimental data in a proper model parameter range.

  7. Primary and secondary scintillation measurements in a Xenon Gas Proportional Scintillation Counter

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, L M P; Freitas, E D C; Monteiro, C M B; Santos, J M F dos [Instrumentation Centre, Physics Department, University of Coimbra, P-3004-516 Coimbra (Portugal); Ball, M; Gomez-Cadenas, J J; Yahlali, N [Instituto de Fisica Corpuscular, E-46071, Valencia (Spain); Nygren, D, E-mail: pancho@gian.fis.uc.p [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

    2010-09-15

    NEXT is a new experiment to search for neutrinoless double beta decay using a 100 kg radio-pure high-pressure gaseous xenon TPC. The detector requires excellent energy resolution, which can be achieved in a Xe TPC with electroluminescence readout. Hamamatsu R8520-06SEL photomultipliers are good candidates for the scintillation readout. The performance of this photomultiplier, used as VUV photosensor in a gas proportional scintillation counter, was investigated. Initial results for the detection of primary and secondary scintillation produced as a result of the interaction of 5.9 keV X-rays in gaseous xenon, at room temperature and at pressures up to 3 bar, are presented. An energy resolution of 8.0% was obtained for secondary scintillation produced by 5.9 keV X-rays. No significant variation of the primary scintillation was observed for different pressures (1, 2 and 3 bar) and for electric fields up to 0.8 V cm{sup -1} torr{sup -1} in the drift region, demonstrating negligible recombination luminescence. A primary scintillation yield of 81 {+-} 7 photons was obtained for 5.9 keV X-rays, corresponding to a mean energy of 72 {+-} 6 eV to produce a primary scintillation photon in xenon.

  8. Primary and secondary scintillation measurements in a xenon Gas Proportional Scintillation Counter

    CERN Document Server

    Fernandes, L M P; Ball, M; Gómez-Cadenas, J J; Monteiro, C M B; Yahlali, N; Nygren, D; Santos, J M F dos

    2010-01-01

    NEXT is a new experiment to search for neutrinoless double beta decay using a 100 kg radio-pure high-pressure gaseous xenon TPC. The detector requires excellent energy resolution, which can be achieved in a Xe TPC with electroluminescence readout. Hamamatsu R8520-06SEL photomultipliers are good candidates for the scintillation readout. The performance of this photomultiplier, used as VUV photosensor in a gas proportional scintillation counter, was investigated. Initial results for the detection of primary and secondary scintillation produced as a result of the interaction of 5.9 keV X-rays in gaseous xenon, at room temperature and at pressures up to 3 bar, are presented. An energy resolution of 8.0% was obtained for secondary scintillation produced by 5.9 keV X-rays. No significant variation of the primary scintillation was observed for different pressures (1, 2 and 3 bar) and for electric fields up to 0.8 V cm-1 torr-1 in the drift region, demonstrating negligible recombination luminescence. A primary scinti...

  9. A new TDCR-LS counter using Channel photomultiplier tubes.

    Science.gov (United States)

    Ivan, C; Cassette, P; Sahagia, Maria

    2008-01-01

    A new Triple to Double Coincidence Ratio (TDCR) liquid scintillation (LS) counter using recently available photodetectors, the Channel photomultiplier (CPM) tubes, was constructed and tested in the framework of a scientific cooperation between IFIN-HH and LNHB. The prototype LS counter uses 3CPM tubes arranged symmetrically in an optical chamber around a standard LS vial. The behavior of the prototype was first evaluated with a light emitting diode (LED) light pulser. The counter was then compared against a TDCR counter using conventional photomultiplier tubes, by measuring (55)Fe, (3)H, (63)Ni and (90)Sr/(90)Y LS sources prepared in commercial liquid scintillation cocktails. Although the observed detection efficiency was significantly lower than the one achieved with the traditional counter, we found a remarkable agreement on the activity determination using the two counters. Details on the prototype and the measurement results obtained are discussed in this paper.

  10. Tipping Point

    Medline Plus

    Full Text Available ... OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point ... 24 hours a day. For young children whose home is a playground, it’s the best way to ...

  11. Access to Bathtub Grab Bars: Evidence of a Policy Gap

    Science.gov (United States)

    Birkett, Nicholas; Nair, Rama; Murphy, Maureen; Roberge, Ginette; Lockett, Donna

    2006-01-01

    This paper examines access to bathtub grab bars in privately and publicly owned apartment buildings and explores the profile of seniors who have access to bathtub grab bars. Results indicate that bathtub grab bars were significantly more prevalent in apartments that were publicly owned (91.3%) as compared to privately owned (37.8%) (p lesser than…

  12. [Storage and use of antioxidants in cereal and peanut bars].

    Science.gov (United States)

    Estévez, A M; Escobar, B; Tepper, A; Castillo, E

    1998-06-01

    The use of fatty materials in cereal bars gives to them a good energetic value; however they are exposed to oxidative rancidity which can affect their acceptability and nutritional value. So, the purpose of this research was to determine the stability in storage and the effect of antioxidants on three tipes of cereal bars with peanuts. Cereal bars with 18% of peanuts were prepared, with and without antioxidants (BHA + BHT; 100 ppm). Bars were packed in polyprolpilene-aluminium-polythilene bags, and were stored at room temperature (18-20 degrees C) for 90 days. Each 30 days, analysis of water activity (Aw); moisture content, peroxides index, sensory quality (flavor, aroma and appearance) and acceptability, were carried out. Moisture content was similar in all bars (7.6-9.6%) and Aw was higher in the bar which contained expanded amaranthus and antioxidant. At the 60th day of storage, the peroxide values were lower in the bars with antioxidants; only the bar which included expanded amaranthus showed significant differences (16.4 meq/kg in the bar with antioxidant and 25.7 meq/kg for the control bar). The sensory parameters were kept within normal status without differences between the bars with antioxidants and the control ones, along all the storage period. Shelf life of bars CM1 and CM2 was at least of 60 days when they are kept at 18-20 degrees C.

  13. 33 CFR 13.01-10 - Gold and silver bars.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Gold and silver bars. 13.01-10... DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-10 Gold and silver bars. No person shall receive more than one Gold Lifesaving Medal and...

  14. 21 CFR 886.5800 - Ophthalmic bar reader.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar reader. 886.5800 Section 886.5800...) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5800 Ophthalmic bar reader. (a) Identification. An ophthalmic bar reader is a device that consists of a magnifying lens intended for use by a...

  15. Observational Evidence of Secular Evolution in Barred Galaxies

    NARCIS (Netherlands)

    Perez, I.; Sanchez-Blazquez, P.; Zurita, A.; Funes, JG; Corsini, EM

    2008-01-01

    We report preliminary results of the derived stellar population metallicities and ages along the bars of a sample of 20 barred galaxies. We find that some galaxies show a positive radial bar metallicity gradient, implying that there has been a chemical enrichment and so that the star formation has l

  16. 10 CFR 39.49 - Uranium sinker bars.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Uranium sinker bars. 39.49 Section 39.49 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.49 Uranium sinker bars. The licensee may use a uranium sinker bar in well logging applications only if it is...

  17. A Reading PR Reference for Bar Executive Staff and Officers.

    Science.gov (United States)

    Georgia State Bar, Atlanta.

    This manual provides information to assist bar association staff and officers in explaining the role and function of the bar and in dealing with critical public-relations problems. Sections discuss the use and value of public relations, public relations and the role of the bar, public-relations problems, and major public-opinion problems…

  18. $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ As the Lightest $c\\bar c s \\bar s$ State

    CERN Document Server

    Lebed, Richard F

    2016-01-01

    The state $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ has recently been demoted by the Particle Data Group from its previous status as the conventional $c\\bar c$ $2 {}^3P_0$ state, largely due to the absence of expected $D\\bar D$ decays. We propose that $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ is actually the lightest $c\\bar c s \\bar s$ state, and calculate the spectrum of such states using the diquark model, identifying many of the observed charmoniumlike states that lack open-charm decay modes as $c\\bar c s \\bar s$. Among other results, we argue that $Y(4140)$ is a $J^{PC} = 1^{++}$ $c\\bar c s \\bar s$ state that has been not been seen in two-photon fusion largely as a consequence of the Landau-Yang theorem.

  19. Neutron pileup algorithms for multiplicity counters

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Sean M.; Stave, Sean; Lintereur, Azaree; Siciliano, Edward; Kouzes, Richard; Bliss, Mary

    2015-06-01

    Abstract The shortage of helium-3 (3He) has created a need to identify alternative neutron detection options for a variety of nuclear nonproliferation applications. One application that may be affected by 3He replacement technology is that of mass accountancy for safeguards, which utilizes coincidence and multiplicity counters to verify special nuclear material declarations. The use of neutron scintillation materials, such as LiF-ZnS sheets, as an alternative to 3He proportional tubes in multiplicity counters requires novel techniques for Pulse Shape Discrimination to distinguish between neutrons and gamma rays. These techniques must work under high count rates, as the maximum momentary rate for incoming neutrons from multiplicity events can be quite large. We have created a fast and accurate neutron discrimination algorithm based on time window filtering and signature comparison that can operate quickly on data with high degrees of gamma ray and neutron pileup. This algorithm is evaluated for its capability to separate signals as the pileup rate increases, and the possibility for implementation on fast hardware (e.g., FPGA hardware) for real-time operation is explored.

  20. Instability patterns between counter-rotating disks

    Directory of Open Access Journals (Sweden)

    F. Moisy

    2003-01-01

    Full Text Available The instability patterns in the flow between counter-rotating disks (radius to height ratio R/h from 3.8 to 20.9 are investigated experimentally by means of visualization and Particle Image Velocimetry. We restrict ourselves to the situation where the boundary layers remain stable, focusing on the shear layer instability that occurs only in the counter-rotating regime. The associated pattern is a combination of a circular chain of vortices, as observed by Lopez et al. (2002 at low aspect ratio, surrounded by a set of spiral arms, first described by Gauthier et al. (2002 in the case of high aspect ratio. Stability curve and critical modes are measured for the whole range of aspect ratios. From the measurement of a local Reynolds number based on the shear layer thickness, evidence is given that a free shear layer instability, with only weak curvature effect, is responsible for the observed patterns. Accordingly, the number of vortices is shown to scale as the shear layer radius, which results from the competition between the centrifugal effects of each disk.

  1. Neutron pileup algorithms for multiplicity counters

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Sean M., E-mail: sean.robinson@pnnl.gov [Pacific Northwest National Laboratory, Seattle, WA 98109 (United States); Stave, Sean; Lintereur, Azaree; Siciliano, Edward; Kouzes, Richard; Bliss, Mary [Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

    2015-06-01

    The shortage of helium-3 ({sup 3}He) has created a need to identify alternative neutron detection options for a variety of nuclear nonproliferation applications. One application that may be affected by {sup 3}He replacement technology is that of mass accountancy for safeguards, which utilizes coincidence and multiplicity counters to verify special nuclear material declarations. The use of neutron scintillation materials, such as LiF–ZnS sheets, as an alternative to {sup 3}He proportional tubes in multiplicity counters requires novel techniques for Pulse Shape Discrimination to distinguish between neutrons and gamma rays. These techniques must work under high count rates, as the maximum momentary rate for incoming neutrons from multiplicity events can be quite large. We have created a fast and accurate neutron discrimination algorithm based on time window filtering and signature comparison that can operate quickly on data with high degrees of gamma ray and neutron pileup. This algorithm is evaluated for its capability to separate signals as the pileup rate increases, and the possibility for implementation on fast hardware (e.g., FPGA hardware) for real-time operation is explored.

  2. The Brazilian military: its role in counter-drug activities.

    OpenAIRE

    Kitchener, Roy I.

    1992-01-01

    Approved for public release; distribution is unlimited This thesis examines the role of Brazil's military in counter-drug operations. Drug trafficking in Brazil poses a growing threat to the country's national security, but Brazil's physical size and limited resources have hindered the government's counter-drug efforts. The Brazilian military has been reluctant to assume a more significant role in counter-drug operations. The thesis argues that external, internal, and ...

  3. Invariant manifolds and the response of spiral arms in barred galaxies

    CERN Document Server

    Tsoutsis, P; Efthymiopoulos, C; Contopoulos, George

    2008-01-01

    The unstable invariant manifolds of the short-period family of periodic orbits around the unstable Lagrangian points $L_1$ and $L_2$ of a barred galaxy define loci in the configuration space which take the form of a trailing spiral pattern. In the present paper we investigate this association in the case of the self-consistent models of Kaufmann & Contopoulos (1996) which provide an approximation of real barred-spiral galaxies. We also examine the relation of `response' models of barred-spiral galaxies with the theory of the invariant manifolds. Our main results are the following: The invariant manifolds yield the correct form of the imposed spiral pattern provided that their calculation is done with the spiral potential term turned on. We provide a theoretical model explaining the form of the invariant manifolds that supports the spiral structure. The azimuthal displacement of the Lagrangian points with respect to the bar's major axis is a crucial parameter in this modeling. When this is taken into accou...

  4. A train for the bus(bars)

    CERN Multimedia

    CERN Bulletin

    2013-01-01

    On 8 April, the first SMACC (Superconducting Magnets and Circuits Consolidation) teams began work in the LHC tunnel. They are responsible for opening the interconnects between the magnets, laying the groundwork for the series of operations that will be performed by the team riding the ‘consolidation train’.   A technician installs the machine tool that allows them to prepare the surface of the section of the bar where the shunt will be fixed. The LHC’s 1,670 dipoles and quadrupoles are powered by power converters and connected by copper 'busbars’. The superconducting cables run through these bars, carrying a current of up to 11,850 amps. Six superconducting cables meet at each interconnect, where they are held together by a soldered (see box) electrical connection sandwiched between two pieces of copper, forming the splice between the busbars of the neighbouring magnets. The integrity of the electrical circuit is depen...

  5. Solving Problems with The Percentage Bar

    Directory of Open Access Journals (Sweden)

    Frans van Galen

    2013-01-01

    Full Text Available At the end of primary school all children more of less know what a percentage is, but yet they often struggle with percentage problems. This article describes a study in which students of 13 and 14 years old were given a written test with percentage problems and a week later were interviewed about the way they solved some of these problems. In a teaching experiment the students were then taught the use of the percentage bar. Although the teaching experiment was very short - just one lesson  -  the results confirm that the percentage bar is a powerful model that deserves a central place in the teaching of percentages.Keywords: percentage, model, design research DOI: http://dx.doi.org/10.22342/jme.4.1.558.1-8

  6. The Disability Dilemma: A Skeptical Bench & Bar

    Directory of Open Access Journals (Sweden)

    Wendy F. Hensel

    2008-04-01

    Full Text Available The legal profession is no stranger to the bias and prejudice present in American society. Members of the bar have been shown to engage in both conscious and subconscious sexism and racism, posing challenges to the profession as the profile of those practicing law has changed over the last several decades to admit increasing numbers of women and minorities.1 Nevertheless, it is notable that few, if any, members of the bar today would question openly whether women or people of color have the ability to be successful, productive members of the profession. Instead, the conventional wisdom is that the greatest obstacles to their success will come in the form of external barriers and institutional policies based on preconceived norms that do not acknowledge the divergent challenges faced by these group members.

  7. Arbejdsulykker inden for BAR-SOSU

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    Denne rapport er udarbejdet til BAR SOSU, som har formuleret følgende opgave: 1. At få udarbejdet et overblik over den viden om ulykker indenfor SOSU´s område, som foreligger i eksisterende statistikker, med henblik på udviklingen over de seneste 5-10 år, ulykkernes konsekvenser i form af skadens...... art og i det omfang det er muligt også ulykkernes art. 2. At få gennemgået BAR SOSU´s nuværende materiale målrettet ulykkesforebyggelse og vurdere, hvad der kan udvikles yderligere til brug for at styrke det ulykkesforebyggende arbejde. 3. Med udgangspunkt i nyere forskning om ulykkesforebyggelse og...

  8. Hardware support for software controlled fast reconfiguration of performance counters

    Science.gov (United States)

    Salapura, Valentina; Wisniewski, Robert W.

    2013-06-18

    Hardware support for software controlled reconfiguration of performance counters may include a plurality of performance counters collecting one or more counts of one or more selected activities. A storage element stores data value representing a time interval, and a timer element reads the data value and detects expiration of the time interval based on the data value and generates a signal. A plurality of configuration registers stores a set of performance counter configurations. A state machine receives the signal and selects a configuration register from the plurality of configuration registers for reconfiguring the one or more performance counters.

  9. Hardware support for software controlled fast reconfiguration of performance counters

    Science.gov (United States)

    Salapura, Valentina; Wisniewski, Robert W

    2013-09-24

    Hardware support for software controlled reconfiguration of performance counters may include a plurality of performance counters collecting one or more counts of one or more selected activities. A storage element stores data value representing a time interval, and a timer element reads the data value and detects expiration of the time interval based on the data value and generates a signal. A plurality of configuration registers stores a set of performance counter configurations. A state machine receives the signal and selects a configuration register from the plurality of configuration registers for reconfiguring the one or more performance counters.

  10. A new highly segmented start counter for the CLAS detector

    Energy Technology Data Exchange (ETDEWEB)

    Sharabian, Y.G. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); Battaglieri, M. [INFN Sezione di Genova, 16146 Genova (Italy); Burkert, V.D. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); DeVita, R. [INFN Sezione di Genova, 16146 Genova (Italy); Elouadrhiri, L. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); Guo, L. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); Kashy, D. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); Kubarovsky, V. [Rensselaer Polytechnic Institute, Troy, NY 12180 and Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); Mutchler, G.S. [T.W. Bonner Nuclear Laboratory, Rice University, Houton, TX 77251-1892 (United States)]. E-mail: mutchler@rice.edu; Ostrick, M. [Physikalisches Institut, Universitaet Bonn, Bonn (Germany); Ripani, M. [INFN Sezione di Genova, 16146 Genova (Italy); Rossi, P. [INFN Laboratori Nazionali di Frascati, 00044 Frascati (Italy); Rottura, A. [INFN Sezione di Genova, 16146 Genova (Italy); Pasyuk, E. [Arizona State University, Tempe, AZ, 85287-1504 (United States); Weygand, D. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States)

    2006-01-01

    The design, construction and performance of a highly segmented Start Counter are described. The Start Counter is an integral part of the trigger used in photon beam running with CLAS in Hall B at the Thomas Jefferson National Accelerator Facility (TJNAF). The Start Counter is constructed of 24 2.2-mm-thick single-ended scintillation paddles, forming a hermetic hexagon around the target region. This device measures the interaction time of the incoming photon in the target by detecting the outgoing particles. The counter provides complex trigger topologies, shows good efficiency and achieved a time resolution of 350 ps.

  11. A critique to the significance of Gettier counter-examples

    Institute of Scientific and Technical Information of China (English)

    Cao Jianbo

    2006-01-01

    Usually,people think that Gettier counter-examples challenged the traditional tripartite definition of knowledge and fundamentally changed the characteristic of the contemporary epistemology.This paper argues that regard for Gettier counter-examples is exaggerated,because(i)the JTB definition is neither an important nor a comprehensive one that covers all knowledge.Moreover,the significance of Gettier counter-examples is limited.(ii)The source of Gettier counter-examples lies in one arbitrary judgment,two mix-ups,three false assumptions,and a misunderstanding about the JTB definition.

  12. Hadron Physics in BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Lafferty, G.D.; /Manchester U.

    2005-08-29

    Some recent results in hadron physics from the BaBar experiment are discussed. In particular, the observation of two new charmed states, the D*{sub sJ}{sup +}(2317) and the D*{sub sJ}{sup +}(2457), is described, and results are presented on the first measurement of the rare decay mode of the B meson, B{sup 0} {pi}{sup 0}{pi}{sup 0}.

  13. Diffusion in barred-spiral galaxies

    CERN Document Server

    Brunetti, Maura; Pfenniger, Daniel

    2010-01-01

    We characterize the radial migration of stars in the disk plane by calculating the diffusion coefficient and the diffusion time-scale for a bulge-disk N-body self-consistent system with a marginally-stable Toomre-Q parameter. We find that diffusion is not constant in time, but follows the evolution of the bar, and becomes maximum near the corotation region and in the external disk region, where asymmetric patterns develop.

  14. Measurement of $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ ratio at 13 TeV with the CMS Detector

    CERN Document Server

    Jo, Young-kwon

    2016-01-01

    The measurement of the cross section ratio $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ is presented using a data sample corresponding to an integrated luminosity of 2.3~$\\rm{fb}^{-1}$ collected in pp collisions at \\\\ $\\sqrt{s}$ = 13TeV with the CMS detector at the LHC. Events with two leptons and at least four reconstructed jets, including at least two identified as b quark jets, in the final state are selected. The measured ratio is $0.022 \\pm 0.003$(stat.)$\\pm0.006$(syst.) in the full phase space. The measured cross section $\\sigma_{t\\bar{t}b\\bar{b}}$ is $3.9 \\pm 0.6$(stat.)$\\pm1.3$(syst.) pb and $\\sigma_{t\\bar{t}jj}$ is $176 \\pm 5$(stat.)$ \\pm 33 $(syst.) pb.

  15. Study of the decay $\\bar{B}^{0}\\rightarrow\\Lambda_{c}^{+}\\bar{p}\\pi^{+}\\pi^{-}$ and its intermediate states

    CERN Document Server

    Lees, J P; Tisserand, V; Grauges, E; Palano, A; Eigen, G; Stugu, B; Brown, D N; Kerth, L T; Kolomensky, Yu G; Lynch, G; Koch, H; Schroeder, T; Asgeirsson, D J; Hearty, C; Mattison, T S; McKenna, J A; So, R Y; Khan, A; Blinov, V E; Buzykaev, A R; Druzhinin, V P; Golubev, V B; Kravchenko, E A; Onuchin, A P; Serednyakov, S I; Skovpen, Yu I; Solodov, E P; Todyshev, K Yu; Yushkov, A N; Kirkby, D; Lankford, A J; Mandelkern, M; Atmacan, H; Gary, J W; Long, O; Vitug, G M; Campagnari, C; Hong, T M; Kovalskyi, D; Richman, J D; West, C A; Eisner, A M; Kroseberg, J; Lockman, W S; Martinez, A J; Schumm, B A; Seiden, A; Chao, D S; Cheng, C H; Echenard, B; Flood, K T; Hitlin, D G; Ongmongkolkul, P; Porter, F C; Rakitin, A Y; Andreassen, R; Huard, Z; Meadows, B T; Sokoloff, M D; Sun, L; Bloom, P C; Ford, W T; Gaz, A; Nauenberg, U; Smith, J G; Wagner, S R; Ayad, R; Toki, W H; Spaan, B; Schubert, K R; Schwierz, R; Bernard, D; Verderi, M; Clark, P J; Playfer, S; Bettoni, D; Bozzi, C; Calabrese, R; Cibinetto, G; Fioravanti, E; Garzia, I; Luppi, E; Piemontese, L; Santoro, V; Baldini-Ferroli, R; Calcaterra, A; de Sangro, R; Finocchiaro, G; Patteri, P; Peruzzi, I M; Piccolo, M; Rama, M; Zallo, A; Contri, R; Guido, E; Vetere, M Lo; Monge, M R; Passaggio, S; Patrignani, C; Robutti, E; Bhuyan, B; Prasad, V; Morii, M; Adametz, A; Uwer, U; Lacker, H M; Lueck, T; Dauncey, P D; Mallik, U; Chen, C; Cochran, J; Meyer, W T; Prell, S; Rubin, A E; Gritsan, A V; Arnaud, N; Davier, M; Derkach, D; Grosdidier, G; Diberder, F Le; Lutz, A M; Malaescu, B; Roudeau, P; Schune, M H; Stocchi, A; Wormser, G; Lange, D J; Wright, D M; Chavez, C A; Coleman, J P; Fry, J R; Gabathuler, E; Hutchcroft, D E; Payne, D J; Touramanis, C; Bevan, A J; Di Lodovico, F; Sacco, R; Sigamani, M; Cowan, G; Davis, C L; Denig, A G; Fritsch, M; Gradl, W; Griessinger, K; Hafner, A; Prencipe, E; Barlow, R J; Jackson, G; Lafferty, G D; Behn, E; Cenci, R; Hamilton, B; Jawahery, A; Roberts, D A; Dallapiccola, C; Cowan, R; Dujmic, D; Sciolla, G; Cheaib, R; Lindemann, D; Patel, P M; Robertson, S H; Biassoni, P; Neri, N; Palombo, F; Stracka, S; Cremaldi, L; Godang, R; Kroeger, R; Sonnek, P; Summers, D J; Nguyen, X; Simard, M; Taras, P; De Nardo, G; Monorchio, D; Onorato, G; Sciacca, C; Martinelli, M; Raven, G; Jessop, C P; LoSecco, J M; Wang, W F; Honscheid, K; Kass, R; Brau, J; Frey, R; Sinev, N B; Strom, D; Torrence, E; Feltresi, E; Gagliardi, N; Margoni, M; Morandin, M; Posocco, M; Rotondo, M; Simi, G; Simonetto, F; Stroili, R; Akar, S; Ben-Haim, E; Bomben, M; Bonneaud, G R; Briand, H; Calderini, G; Chauveau, J; Hamon, O; Leruste, Ph; Marchiori, G; Ocariz, J; Sitt, S; Biasini, M; Manoni, E; Pacetti, S; Rossi, A; Angelini, C; Batignani, G; Bettarini, S; Carpinelli, M; Casarosa, G; Cervelli, A; Forti, F; Giorgi, M A; Lusiani, A; Oberhof, B; Perez, A; Rizzo, G; Walsh, J J; Pegna, D Lopes; Olsen, J; Smith, A J S; Anulli, F; Faccini, R; Ferrarotto, F; Ferroni, F; Gaspero, M; Gioi, L Li; Mazzoni, M A; Piredda, G; Bünger, C; Grünberg, O; Hartmann, T; Leddig, T; Schröder, H; Voß, C; Waldi, R; Adye, T; Olaiya, E O; Wilson, F F; Emery, S; de Monchenault, G Hamel; Vasseur, G; Y\\`, Ch; Aston, D; Bartoldus, R; Benitez, J F; Cartaro, C; Convery, M R; Dorfan, J; Dubois-Felsmann, G P; Dunwoodie, W; Ebert, M; Field, R C; Sevilla, M Franco; Fulsom, B G; Gabareen, A M; Graham, M T; Grenier, P; Hast, C; Innes, W R; Kelsey, M H; Kim, P; Kocian, M L; Leith, D W G S; Lewis, P; Lindquist, B; Luitz, S; Luth, V; Lynch, H L; MacFarlane, D B; Muller, D R; Neal, H; Nelson, S; Perl, M; Pulliam, T; Ratcliff, B N; Roodman, A; Salnikov, A A; Schindler, R H; Snyder, A; Su, D; Sullivan, M K; Va'vra, J; Wagner, A P; Wisniewski, W J; Wittgen, M; Wright, D H; Wulsin, H W; Young, C C; Ziegler, V; Park, W; Purohit, M V; White, R M; Wilson, J R; Randle-Conde, A; Sekula, S J; Bellis, M; Burchat, P R; Miyashita, T S; Puccio, E M T; Alam, M S; Ernst, J A; Gorodeisky, R; Guttman, N; Peimer, D R; Soffer, A; Spanier, S M; Ritchie, J L; Ruland, A M; Schwitters, R F; Wray, B C; Izen, J M; Lou, X C; Bianchi, F; Gamba, D; Zambito, S; Lanceri, L; Vitale, L; Martinez-Vidal, F; Oyanguren, A; Villanueva-Perez, P; Ahmed, H; Albert, J; Banerjee, Sw; Bernlochner, F U; Choi, H H F; King, G J; Kowalewski, R; Lewczuk, M J; Nugent, I M; Roney, J M; Sobie, R J; Tasneem, N; Gershon, T J; Harrison, P F; Latham, T E; Band, H R; Dasu, S; Pan, Y; Prepost, R; Wu, S L

    2013-01-01

    We study the decay $\\bar{B}^{0}\\rightarrow\\Lambda_{c}^{+}\\bar{p}\\pi^{+}\\pi^{-}$, reconstructing the \\Lambda_{c}^{+} baryon in the $p K^{-}\\pi^{+}$ mode, using a data sample of $467\\times 10^{6}$ $B\\bar{B}$ pairs collected with the BaBar detector at the PEP-2 storage rings at SLAC. We measure branching fractions for decays with intermediate $\\Sigma_{c}$ baryons to be ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2455)^{++}\\bar{p}\\pi^{-}]=(21.3 \\pm 1.0 \\pm 1.0 \\pm 5.5) \\times 10^{-5}$, ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2520)^{++}\\bar{p}\\pi^{-}]=(11.5\\pm 1.0 \\pm 0.5 \\pm 3.0)\\times 10^{-5}$, ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2455)^{0}\\bar{p}\\pi^{+}]=(9.1 \\pm 0.7 \\pm 0.4 \\pm 2.4)\\times10^{-5}$, and ${\\cal B}[\\bar{B}^{0}\\rightarrow\\Sigma_{c}(2520)^{0}\\bar{p}\\pi^{+}]= (2.2 \\pm 0.7 \\pm 0.1\\pm 0.6) \\times 10^{-5}$, where the uncertainties are statistical, systematic, and due to the uncertainty on the $\\Lambda_{c}^{+}\\rightarrow\\proton\\Km\\pi^{+}$ branching fraction, respectively. For decays without $\\Sig...

  16. New Spectroscopy at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Mazzoni, M.A.; /INFN, Rome

    2007-04-18

    The Babar experiment at the SLAC B factory has accumulated a high luminosity that offers the possibility of systematic studies of quarkonium spectroscopy and of investigating rare new phenomena. Recent results in this field are presented. In recent times spectroscopy has become exciting again, after the discovery of new states that are not easily explained by conventional models. States such as the X(3872) and the Y(4260) could be new excited charmonium states, but require precise measurements for positive identification. The BaBar experiment [1] is installed at the asymmetric storage ring PEP-II. 90% of the data accumulated by BaBar are taken at the Y(4S) (10.58 GeV) and 10% just below (10.54 GeV). The BaBar detector includes a 5-layer, double-sided silicon vertex tracker and a 40-layer drift chamber in a 1.5 T solenoidal magnetic field, which detect charged particles and measures their momenta and ionization energy losses. Photons, electrons, and neutral hadrons are detected with a CsI(Tl)-crystal electromagnetic calorimeter. An internally reflecting ring-imaging Cherenkov is also used for particle id. Penetrating muon and neutral hadrons are identified by an array of resistive-plate chambers embedded in the steel of the flux return. The detector allows good track and vertex resolution, good particle id and good photon detection so it is especially suited for spectroscopy studies.

  17. Formation of Nuclear Spirals in Barred Galaxies

    CERN Document Server

    Ann, H B; Thakur, Parijat

    2004-01-01

    We have performed smoothed particle hydrodynamics (SPH) simulations for the response of the gaseous disk to the imposed moderately strong non-axisymmetric potentials. The model galaxies are composed of the three stellar components (disk, bulge and bar) and two dark ones (supermassive black hole and halo) whose gravitational potentials are assumed to be invariant in time in the frame corotating with the bar. We found that the torques alone generated by the moderately strong bar that gives the maximum of tangential-to-radial force ratio as $(F_{Tan}/F_{Rad})_{max}= 0.3$ are not sufficient to drive the gas particles close to the center due to the barrier imposed by the inner Lindblad resonances (ILRs). In order to transport the gas particles towards the nucleus ($r<100$ pc), a central supermassive black hole (SMBH) and high sound speed of the gas are required to be present. The former is required to remove the inner inner Lindblad resonance (IILR) that prevents gas inflow close to the nucleus, while the latte...

  18. Leptonic B Decays at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Baracchini, Elisabetta; /Rome U. /INFN, Rome

    2011-11-10

    We will present the most recent results on leptonic B decays B{sup {+-}(0)} {yields} K*{sup {+-}(0)}{nu}{bar {nu}} and B{sup {+-}} {yields} {mu}{sup {+-}}{nu}, based on the data collected by the BaBar detector at PEP-II, an asymmetric e{sup +}e{sup -} collider at the center of mass energy of the {Upsilon}(4S) resonance. Rare B decays have always been a standard probe for New Physics (NP) searches. The very low Standard Model (SM) rate of these decays often make them unaccessible with the present experimental datasets, unless NP effects enhance the rate up to the current experimental sensitivity. Moreover, as NP effects can modify the decay kinematic, particular attention must be paid in order to perform a model independent analysis. A B-Factory provides an unique environment to investigate these processes. The high number of B{bar B} pairs produced by a B-Factory often allows to approach the needed experimental sensitivity. Moreover, the clean environment and the closed kinematic of the initial state enable to obtaining a very pure sample where to look for these decays.

  19. Leptonic B Decays at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Monorchio, Diego; /INFN, Naples /Naples U.

    2011-09-13

    The authors will present the most recent results on leptonic B decays B{sup {+-}(0)} {yields} K*{sup {+-}(0)} {nu}{bar {nu}} and B{sup {+-}} {yields} {mu}{sup {+-}}{nu}, based on the data collected by the BaBar detector at PEP-II, an asymmetric e{sup +}e{sup -} collider at the center of mass energy of the {Upsilon}(4S) resonance. Rare B decays have always been a standard probe for New Physics (NP) searches. The very low Standard Model (SM) rate of these decays often make them unaccessible with the present experimental datasets, unless NP effects enhance the rate up to the current experimental sensitivity. Moreover, as NP effects can modify the decay kinematic, particular attention must be payed in order to perform a model independent analysis. A B-Factory provides an unique environment where to investigate these processes. The high number of B{bar B} pairs produced by a B-Factory often allows to approach the needed experimental sensitivity. Moreover, the clean environment and the closed kinematic of the initial state enable to obtaining a very pure sample where to look for these decays.

  20. Near Infrared Spectra of the Orion Bar

    CERN Document Server

    Marconi, A; Natta, A; Walmsley, C M; Spazio, D A S; Firenze, U; Arcetri, O A

    1997-01-01

    We have used the LONGSP spectrometer on the 1.5-m TIRGO telescope to obtain long slit spectra in the J, H, and K wavelength bands towards two positions along the Orion bar. These data have been supplemented with images made using the ARNICA camera mounted on TIRGO as well as with an ESO NTT observation carried out by Dr A. Moorwood. We detect a variety of transitions of hydrogen, helium, OI, FeII, FeIII, and H_2 . From our molecular hydrogen data, we conclude that densities are moderate (3-6 10^4 cm^-3) in the layer responsible for the molecular hydrogen emission and give no evidence for the presence of dense neutral clumps. We also find that the molecular hydrogen bar is likely to be tilted by ~10 degrees relative to the line of sight. We discuss the relative merits of several models of the structure of the bar and conclude that it may be split into two structures separated by 0.2-0.3 parsec along the line of sight. It also seems likely to us that in both structures, density increases along a line perpendicu...

  1. Antihydrogen Production in $ \\bar{p} $ Z - interaction

    CERN Multimedia

    2002-01-01

    % PS210 \\\\ \\\\ The production of the antihydrogen atom $ \\bar {H}^0 \\equiv \\bar{p}e $ as the simplest atomic bound state of antimatter has been studied. Nine $ \\bar {H}^0 $ have been observed.\\\\ \\\\ The production of $ \\bar {H}^0 $ is predominantly mediated by the two-photon mechanism in the antiproton-nucleus interaction. In principle $ \\bar {H}^0 $ is well suited for investigations of fundamental CPT violation studies under different forces, however, in the present experiment we concentrated on the production of this antimatter object, since so far it never had been observed.

  2. How can double-barred galaxies be long-lived?

    Science.gov (United States)

    Wozniak, Hervé

    2015-03-01

    Context. Double-barred galaxies account for almost one third of all barred galaxies, suggesting that secondary stellar bars, which are embedded in large-scale primary bars, are long-lived structures. However, up to now it has been hard to self-consistently simulate a disc galaxy that sustains two nested stellar bars for longer than a few rotation periods. Aims: The dynamical and physical requirements for long-lived triaxiality in the central region of galaxies still need to be clarified. Methods: N-body/hydrodynamical simulations including star formation recipes have been performed. Their properties (bar lengths, pattern speeds, age of stellar population, and gas content) have been compared with the most recent observational data in order to prove that they are representative of double-barred galaxies, even SB0. Overlaps in dynamical resonances and bar modes have been looked for using Fourier spectrograms. Results: Double-barred galaxies have been successfully simulated with lifetimes as long as 7 Gyr. The stellar and gaseous distributions in the central regions are time dependent and display many observed morphological features (circumnuclear rings, pseudo-bulges, triaxial bulges, ovals, etc.) typical of barred galaxies, even early-type. The stellar population of the secondary bar is younger on average than for the primary large-scale bar. An important feature of these simulations is the absence of any resonance overlap for several Gyr. In particular, there is no overlap between the primary bar inner Lindblad resonance and the secondary bar corotation. Therefore, mode coupling cannot sustain the secondary bar mode. Star formation is identified here as possibly being responsible for bringing energy to the nuclear mode. Star formation is also responsible for limiting the amount of gas in the central region which prevents the orbits sustaining the secondary bar from being destroyed. Therefore, the secondary bar can dissolve but reappear after ≈1 Gyr as the

  3. Heat Transfer in the LHC Main Superconducting Bus Bars

    CERN Document Server

    Granieri, P P; Richter, D

    2011-01-01

    CERN is performing a systematic analysis of the interconnecting bus bars of the Large Hadron Collider (LHC) main magnets. Their thermal, electrical, mechanical and hydraulic performances are addressed. In the frame of these studies, the heat transfer between the main superconducting (SC) bus bars and the surrounding He bath is investigated. It represents a key parameter in the comprehension of the bus bars stability and quench propagation mechanisms, thus crucial for the analysis of the 2008 incident which was triggered by a defective bus bars joint. This paper reports on the experimental tests and relative analysis aiming at describing the thermal behavior of the LHC main bus bars.

  4. Tipping Point

    Medline Plus

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... see news reports about horrible accidents involving young children and furniture, appliance and tv tip-overs. The ...

  5. Slowly rotating bars-Morphologies introduced by bistability in barred-spiral galactic potentials

    CERN Document Server

    Tsigaridi, L

    2015-01-01

    We investigate the orbital dynamics of a \\textit{barred-spiral} model when the system is rotating slowly and corotation is located beyond the end of the spiral arms. In the characteristic of the central family of periodic orbits we find a "bistable region". In the response model we observe a ring surrounding the bar and spiral arms starting tangential to the ring. This is a morphology resembling barred-spiral systems with inner rings. However, the dynamics associated with this structure in the case we study is different from that of a typical bar ending close to corotation. The ring of our model is round, or rather elongated perpendicular to the bar. It is associated with a folding (an "S" shaped feature) of the characteristic of the central family, which is typical in bistable bifurcations. Along the "S" part of the characteristic we have a change in the orientation of the periodic orbits from a x1-type to a x2-type morphology. The orbits populated in the response model change rather abruptly their orientati...

  6. Automated bar detection in local disc galaxies from the SDSS - The colors of bars

    CERN Document Server

    Consolandi, Guido

    2016-01-01

    This paper describes an automatic isophotal fitting procedure that succeeds, without the support of any visual inspection of neither the images nor the ellipticity/P.A. radial profiles, at extracting a fairly pure sample of barred LTGs among thousands of optical images from the SDSS. The procedure relies on the methods described in Consolandi et al. (2016) to robustly extract the photometrical properties of a large sample of local SDSS galaxies and is tailored to extract bars on the basis of their well-known peculiarities in their P.A. and ellipticity profiles. It has been run on a sample of 5853 galaxies in the Coma and Local supercluster. The procedure extracted for each galaxy a color, an ellipticity and a position angle radial profile of the ellipses fitted to the isophotes. Examining automatically the profiles of 922 face-on late-type galaxies (B/A >0.7) the procedure found that ~ 36 % are barred. The local bar fraction strongly increases with stellar mass. The sample of barred galaxies is used to constr...

  7. On the galactic spin of barred disk galaxies

    CERN Document Server

    Cervantes-Sodi, Bernardo; Park, Changbom; Wang, Lixin

    2013-01-01

    We present a study of the connection between the galactic spin parameter $\\lambda_{d}$ and the bar fraction in a volume-limited sample of 10,674 disk galaxies drawn from the Sloan Digital Sky Survey Data Release 7. The galaxies in our sample are visually classified into galaxies hosting strong or weak bars, and non-barred galaxies. We find that the spin distributions of these three classes are statistically different, with galaxies hosting strong bars with the lowest $\\lambda_{d}$ values, followed by non-barred galaxies, while galaxies with weak bars present typically high spin parameters. The bar fraction presents its maximum at low to intermediate $\\lambda_{d}$ values for the case of strong bars, while the maximum for weak bars is at high $\\lambda_{d}$. This bi-modality is in good agreement with previous studies finding stronger bars hosted by luminous, massive, red galaxies with low content of cold gas, while weak bars are found in low luminosity, low mass, blue galaxies, usually gas rich. In addition, the...

  8. Which bulges are favoured by barred S0 galaxies?

    CERN Document Server

    Barway, Sudhanshu; Vaghmare, Kaustubh; Kembhavi, Ajit K

    2016-01-01

    S0 galaxies are known to host classical bulges with a broad range of size and mass, while some such S0s are barred and some not. The origin of the bars has remained as a long-standing problem -- what made bar formation possible in certain S0s? By analysing a large sample of S0s with classical bulges observed by the Spitzer space telescope, we find that most of our barred S0s host comparatively low-mass classical bulges, typically with bulge-to-total ratio ($B/T$) less than $0.5$; whereas S0s with more massive classical bulges than these do not host any bar. Furthermore, we find that amongst the barred S0s, there is a trend for the longer and massive bars to be associated with comparatively bigger and massive classical bulges -- possibly suggesting bar growth being facilitated by these classical bulges. In addition, we find that the bulge effective radius is always less than the bar effective radius --indicating an interesting synergy between the host classical bulge and bars being maintained while bar growth ...

  9. Fiber-Optic Monitoring System of Particle Counters

    Directory of Open Access Journals (Sweden)

    A. A. Titov

    2016-01-01

    Full Text Available The article considers development of a fiber-optic system to monitor the counters of particles. Presently, optical counters of particles, which are often arranged at considerable distance from each other, are used to study the saltation phenomenon. For monitoring the counters, can be used electric communication lines.However, it complicates and raises the price of system Therefore, we offered a fiber-optic system and the counter of particles, free from these shortcomings. The difference between the offered counter of particles and the known one is that the input of radiation to the counter and the output of radiation scattering on particles are made by the optical fibers, and direct radiation is entered the optical fiber rather than is delayed by a light trap and can be used for lighting the other counters thereby allowing to use their connection in series.The work involved a choice of the quartz multimode optical fiber for communication, defining the optical fiber and lenses parameters of the counter of particles, and a selection of the radiation source and the photo-detector.Using the theory of light diffraction on a particle, a measuring range of the particle sizes has been determined. The system speed has been estimated, and it has been shown that a range of communication can reach 200km.It should be noted that modulation noise of counters of particles connected in series have the impact on the useful signal. To assess the extent of this influence we have developed a calculation procedure to illustrate that with ten counters connected in series this influence on the signal-to-noise ratio will be insignificant.Thus, it has been shown that the offered fiber-optic system can be used for monitoring the counters of particles across the desertified territories. 

  10. MULTI-bar K (hyper)nuclei and Kaon Condensation

    Science.gov (United States)

    Gazda, D.; Mareš, J.; Friedman, E.; Gal, A.

    2010-10-01

    We report on recent relativistic mean-field calculations of multi-bar K nuclei1,2 which were performed fully and self-consistently across the periodic table. The bar K separation energy B{bar K} as well as the nuclear and bar K-meson densities were found to saturate with the number of antikaons in the nuclear medium. Saturation appears robust against a wide range of variations, including the nuclear model used and the type of boson fields mediating the strong interactions. In addition, we have explored properties of kaonic hypernuclei - strange systems made of nucleons, hyperons and K- mesons. We observed saturation also in these objects. Since the bar K separation energy B{bar K} does not exceed 200 MeV, multi-bar K nuclei lie energetically well above multi-hyperonic nuclei and it is unlikely that kaon condensation could occur in strong-interaction self-bound hadronic matter.

  11. Design of LED edge-lit light bar for automotive taillight applications

    Science.gov (United States)

    Yu, Jyh-Cheng; Chen, Jia-Hao; Liu, Shih-Chiang

    2013-09-01

    This study investigates the optical design of LED edge-lit curved light bar and applies to the design of automotive taillight. LEDs have been widely used in automotive lighting. However, the designs are mostly of direct backlight using arrays of LEDs with diffusive patterns above, which often causes problems such as low uniformity, glaring, and excess LEDs. Edge-lit light guide devices have been widely used in the back light models of LCD. However, the geometry of the lighting devices in the automotive lighting is often curved and non-rectangular, and the related literatures are very limited. This study addresses the design of edge-lit curved light bars and the optimization scheme for uniform light emitting. An automotive taillight with LED edge-lit light bar is used as an illustrated example. The light tracing software, TracePro is used to simulate the optical characteristics of the proposed design. 90° V-cuts are used as the optical features to distribute the light, and the lead angles of the V-cut are varied to achieve the optimum axial luminous intensity. A Fuzzy optimization scheme is proposed to manipulate the anchor spacing points which continuously varies the V-cut spacing along the light bar to satisfy the requirements of Society of Automotive Engineers (SAE) regulations and the illumination uniformity requirements. This study also proposes a solution to reduce the illuminance difference between the inner and the outer portions of the curved section of a light bar by varying bilaterial thickness of light bar cross section.

  12. Addressing challenges in bar-code scanning of large-volume infusion bags.

    Science.gov (United States)

    Raman, Kirthana; Heelon, Mark; Kerr, Gary; Higgins, Thomas L

    2011-08-01

    A hospital pharmacy's efforts to identify and address challenges with bedside scanning of bar codes on large-volume parenteral (LVP) infusion bags are described. Bar-code-assisted medication administration (BCMA) has been shown to reduce medication errors and improve patient safety. After the pilot implementation of a BCMA system and point-of-care scanning procedures at a medical center's intensive care unit, it was noted that nurses' attempted bedside scans of certain LVP bags for product identification purposes often were not successful. An investigation and root-cause analysis, including observation of nurses' scanning technique by a multidisciplinary team, determined that the scanning failures stemmed from the placement of two bar-code imprints-one with the product identification code and another, larger imprint with the expiration date and lot number-adjacently on the LVP bags. The nursing staff was educated on a modified scanning technique, which resulted in significantly improved success rates in the scanning of the most commonly used LVP bags. Representatives of the LVP bag manufacturer met with hospital staff to discuss the problem and corrective measures. As part of a subsequent infusion bag redesign, the manufacturer discontinued the use of the bar-code imprint implicated in the scanning failures. Failures in scanning LVP bags were traced to problematic placement of bar-code imprints on the bags. Interdisciplinary collaboration, consultation with the bag manufacturer, and education of the nursing and pharmacy staff resulted in a reduction in scanning failures and the manufacturer's removal of one of the bar codes from its LVP bags.

  13. Combustion Dynamic Characteristics Identification in a 9-point LDI Combustor Under Choked Outlet Boundary Conditions

    Science.gov (United States)

    He, Zhuohui J.; Chang, Clarence T.

    2017-01-01

    Combustion dynamics data were collected at the NASA Glenn Research Center's CE-5 flame tube test facility under combustor outlet choked conditions. Two 9-point Swirl-Venturi Lean Direct Injection (SV-LDI) configurations were tested in a rectangular cuboid combustor geometry. Combustion dynamic data were measured at different engine operational conditions up to inlet air pressure and temperature of 24.13 bar and 828 K, respectively. In this study, the effects of acoustic cavity resonance, precessing vortex core (PVC), and non-uniform thermal expansion on the dynamic noise spectrum are identified by comparing the dynamic data that collected at various combustor inlet conditions along with combustor geometric calculations. The results show that the acoustic cavity resonance noises were seen in the counter-rotating pilot configuration but not in the co-rotating pilot configuration. Dynamic pressure noise band at around 0.9 kHz was only detected at the P'41 location (9.8 cm after fuel injector face) but not at the P'42 location (29 cm after the fuel injector face); the amplitude of this noise band depended on the thermal expansion ratio (T4/T3). The noise band at around 1.8 kHz was found to depend on the inlet air pressure or the air density inside the combustor. The PVC frequency was not observed in these two configurations.

  14. Modelling of an IR scintillation counter

    CERN Document Server

    Fraga, M M F; Policarpo, Armando

    2000-01-01

    A systematic study of the excitation and de-excitation mechanisms in ternary gas mixtures Ar+CO sub 2 +N sub 2 is presented regarding the possibility of developing a proportional scintillation counter based on the detection of the infrared molecular emissions associated with the lowest vibrational states of molecules. The use of visible or near-infrared photons (lambda<1 mu m) for applications like imaging and quality control of microstructure detectors has been reported. In view of these applications we analyse the processes leading to near-infrared emissions in pure argon and give an estimation of the number of photons emitted per electron, at several pressures, as a function of the charge gain.

  15. Absolute calibration of TFTR helium proportional counters

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, J.D.; Diesso, M.; Jassby, D.; Johnson, L.; McCauley, S.; Munsat, T.; Roquemore, A.L. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Barnes, C.W. [Princeton Univ., NJ (United States). Plasma Physics Lab.]|[Los Alamos National Lab., NM (United States); Loughlin, M. [Princeton Univ., NJ (United States). Plasma Physics Lab.]|[JET Joint Undertaking, Abingdon (United Kingdom)

    1995-06-01

    The TFTR helium proportional counters are located in the central five (5) channels of the TFTR multichannel neutron collimator. These detectors were absolutely calibrated using a 14 MeV neutron generator positioned at the horizontal midplane of the TFTR vacuum vessel. The neutron generator position was scanned in centimeter steps to determine the collimator aperture width to 14 MeV neutrons and the absolute sensitivity of each channel. Neutron profiles were measured for TFTR plasmas with time resolution between 5 msec and 50 msec depending upon count rates. The He detectors were used to measure the burnup of 1 MeV tritons in deuterium plasmas, the transport of tritium in trace tritium experiments, and the residual tritium levels in plasmas following 50:50 DT experiments.

  16. EFFECT OF COUNTERS IN PERFORMANCE OF HADOOP

    Directory of Open Access Journals (Sweden)

    Preeti Jain

    2015-10-01

    Full Text Available Recent technological advancements have led to an overflow of data from distinctive domains (e.g., health care and scientific sensors, user-generated data, Internet and financial companies, and supply chain systems over the past two decades [1]. Big data is commonly unstructured, huge in volume and require more real-time analysis. This paper discusses a Big Data problem from NCDC for huge volume of weather data collected from various parts of world. We had generated map ( and reduce ( function for solving this problem and experimental results of these applications on a Hadoop cluster are being discussed. In this paper, performance of above application has been shown with respect to some counters available.

  17. Microstrip proportional counter development at MSFC

    Science.gov (United States)

    Fulton, M. A.; Kolodziejczak, J. J.; Ramsey, B. D.

    1992-01-01

    Microstrip detectors are an exciting new development in proportional counter design fabricated using integrated circuit-type photolithography techniques; they therefore offer very high spatial accuracy and uniformity. A development program is underway at NASA-Marshall to produce large-area microstrips for use in an X-ray detector balloon flight program and to investigate the general performance limits of these new devices. Microstrips tested so far have been fabricated both in-house using standard photolithographic techniques and by an outside contractor using electron beam technology. Various substrate materials have been tested along with different electrode configurations. The distributions of pickup on subdivided cathodes on both top and bottom surfaces of the microstrips are also being investigated for use as two-dimensional imaging detectors. Data from these tests in the development of a large-area device will be presented.

  18. Actively suspended counter-rotating machine

    Science.gov (United States)

    Studer, Philip A. (Inventor)

    1983-01-01

    A counter-rotating machine, such as a positive displacement pump having a pair of meshed, non-contacting helical screws (10,12), subjects its rotating members to axial and radial thrust forces when used for such purposes as compression of liquid or gaseous phase fluids while transporting them through a pump cavity (11,13). Each helical screw (10,12) has a shaft (17,17') which is actively suspended at opposite ends (11a,11b) of the pump cavity by a servo-controlled magnetic bearing assembly (19) and a servo-controlled rotary drive motor (20). Both bearing assemblies and drive motors are mounted on the outside of the pump cavity (11,13). Opto-electric angular position sensors (250) provide synchronization between radial orientation of the drive motors. The bearing assemblies and drive motors conjugately provide axial stabilization and radial centering of the helical screws during volumetric compression of aspirated liquid or gaseous phase fluids.

  19. Over-the-counter analgesic use.

    Science.gov (United States)

    De Broe, Marc E; Elseviers, Monique M

    2009-10-01

    Chronic analgesic nephropathy, particularly chronic interstitial nephritis and renal papillary necrosis, results from daily use for many years of mixtures containing at least two analgesics and caffeine or dependence-inducing drugs. Computed tomography scan can accurately diagnose this disease even in the absence of reliable information on previous analgesic use. The occasion to moderate regular use of aspirin and nonsteroidal anti-inflammatory drugs is without renal risk when renal function is normal. Paracetamol use is less clear although the risk is not great. The continued use of non-phenacetin-combined analgesics with or without nonsteroidal anti-inflammatory drugs is associated with faster progression toward renal impairment. As long as high-risk analgesic mixtures are available over the counter, analgesic nephropathy will continue to be a problem.

  20. The multimodal argumentation of persuasive counter discourses

    DEFF Research Database (Denmark)

    Maier, Carmen Daniela

    with the characteristics and potential fallacies of the advertising discourse of commercials. The original advertising discourse is deconstructed and reconstructed with additional visual material in front of the viewers’ eyes who are instructed by a voiceover narrator what to look at and how to identify and decode...... and critical participants in the process of message understanding. In this paper, I explore the Media Bites videos that identify and discuss problematic gender issues in commercials advertising various products. I adopt a multimodal approach in my discourse analysis and I establish which semiotic modes...... are given prominence in the argumentation by examining their complex interplay and functional differentiation. The ways in which speech, writing and images articulate the counter discourse occupy a central position in the analysis. A special focus is put on the multimodal configuration of specific...

  1. Exact calculations of a quasi-bound state in the $\\bar{K} \\bar{K} N$ system

    CERN Document Server

    Shevchenko, N V

    2015-01-01

    Dynamically exact calculations of a quasi-bound state in the $\\bar{K}\\bar{K}N$ three-body system are performed using Faddeev-type AGS equations. As input two phenomenological and one chirally motivated $\\bar{K}N$ potentials are used, which describe the experimental information on the $\\bar{K}N$ system equally well and produce either a one- or two-pole structure of the $\\Lambda(1405)$ resonance. For the $\\bar{K}\\bar{K}$ interaction separable potentials are employed that are fitted to phase shifts obtained from two theoretical models. The first one is a phenomenological $\\bar{K}\\bar{K}$ potential based on meson exchange, which is derived by SU(3) symmetry arguments from the J\\"ulich $\\pi \\pi - \\bar{K} K$ coupled-channels model. The other interaction is a variant of the first one, which is adjusted to the $KK$ s-wave scattering length recently determined in lattice QCD simulations. The position and width of the $\\bar{K}\\bar{K}N$ quasi-bound state is evaluated in two ways: (i) by a direct pole search in the compl...

  2. The Counter Terrorist Classroom: Religion, Education, and Security

    Science.gov (United States)

    Gearon, Liam

    2013-01-01

    The article identifies international cases--from the United States, Europe, and the United Nations--of an emergent interface of religion, education, and security. This is manifest in the uses of religion in education to counter religious extremism, the notional "counter terrorist classroom." To avoid an over-association of extremism with religion,…

  3. Majorizational Choosing of SeveralDifferent Fuzzy Counter Operator

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Different fuzzy reasoning methods were made by choosing different fuzzy operater. This article generally introduced the basic structure of fuzzy controller ,and gave several different fuzzy controllers ,and compared and analyzed different fuzzy counters in theory and computer simulating control and realized majorizational choosing of several fuzzy counters.

  4. Counter-terrorism strategies in Indonesia, Algeria and Saudi Arabia

    NARCIS (Netherlands)

    Meijer, R.; Hasan, Noorhaidi; Hendriks, B.; Janssen, F.

    2012-01-01

    This report is the result of a year-long study, conducted from March 2010 to March 2011, of the counter-terrorist strategies of three countries: Indonesia, Algeria and Saudi Arabia. The aim of this study was to acquire insight into the counter-terrorist strategies of these countries, to analyse them

  5. VLSI Architecture Of A Binary Up/Down Counter

    Science.gov (United States)

    Hsu, In-Shek; Truong, Trieu-Kie; Reed, I. S.

    1988-01-01

    Identical stages contain relatively-few logic gates. New algorithm simplifies design of binary up/down counter. Design suitable for very-large-scale integrated circuits. Contains simple "pipeline" array of identical cells. Programmable logic unit converts increment and decrement input signals to "U" and "D" signals required by algorithm of counter.

  6. The Counter Terrorist Classroom: Religion, Education, and Security

    Science.gov (United States)

    Gearon, Liam

    2013-01-01

    The article identifies international cases--from the United States, Europe, and the United Nations--of an emergent interface of religion, education, and security. This is manifest in the uses of religion in education to counter religious extremism, the notional "counter terrorist classroom." To avoid an over-association of extremism with…

  7. Dirty Fighting: How to Counter Total Warfare Mentality

    Science.gov (United States)

    2015-06-12

    DIRTY FIGHTING: HOW TO COUNTER TOTAL WARFARE MENTALITY A thesis presented to the Faculty of the U.S. Army Command and...to Counter Total Warfare Mentality Approved by: , Thesis Committee Chair LTC Sandra J. Sanchez, MBA , Member Marlyn R. Pierce...

  8. Lessons from History for Counter- Terrorism Strategic Communications

    NARCIS (Netherlands)

    Ingram, H.J.; Reed, A.G.

    2016-01-01

    Drawing on the Counter-terrorism Strategic Communication (CTSC) Project’s research paper “A Brief History of Propaganda during Conflict“, this Policy Brief lays out the key policy-relevant lessons for developing effective counter-terrorism strategic communications. It presents a framework of

  9. The Counter Terrorist Classroom: Religion, Education, and Security

    Science.gov (United States)

    Gearon, Liam

    2013-01-01

    The article identifies international cases--from the United States, Europe, and the United Nations--of an emergent interface of religion, education, and security. This is manifest in the uses of religion in education to counter religious extremism, the notional "counter terrorist classroom." To avoid an over-association of extremism with…

  10. Recent results on aerogel development for use in Cherenkov counters

    Energy Technology Data Exchange (ETDEWEB)

    Danilyuk, A.F. E-mail: danilyuk@catalysis.nsk.su; Kirillov, V.L.; Savelieva, M.D.; Bobrovnikov, V.S.; Buzykaev, A.R.; Kravchenko, E.A.; Lavrov, A.V.; Onuchin, A.P

    2002-11-21

    Synthesis of silica aerogel for Cherenkov counters is being studied for more than 10 years at the Boreskov Institute of Catalysis in collaboration with the Budker Institute of Nuclear Physics. Index of refraction, light scattering length and light absorption length are optical characteristics which determine the quality of aerogel Cherenkov counter. These parameters were measured for the aerogel produced. The results are presented.

  11. Recent results on aerogel development for use in Cherenkov counters

    CERN Document Server

    Danilyuk, A F; Savelieva, M D; Bobrovnikov, V S; Buzykaev, A R; Kravchenko, E A; Lavrov, A V; Onuchin, A P

    2002-01-01

    Synthesis of silica aerogel for Cherenkov counters is being studied for more than 10 years at the Boreskov Institute of Catalysis in collaboration with the Budker Institute of Nuclear Physics. Index of refraction, light scattering length and light absorption length are optical characteristics which determine the quality of aerogel Cherenkov counter. These parameters were measured for the aerogel produced. The results are presented.

  12. Counter-Buffing: A Visual Criticism of Guerrilla Advertising

    Science.gov (United States)

    Lauzon, Robb Conrad; Cooke, Laquana

    2017-01-01

    This article addresses and explores hip-hop's reclamation of space using transit as a public bulletin. It is situated within counter-publics discourse and couched in the theoretical frameworks offered by visual rhetorical theory. This article also discusses hip-hop counter-publics through guerrilla advertising by former graffiti artists, SKI and…

  13. Counter-terrorism strategies in Indonesia, Algeria and Saudi Arabia

    NARCIS (Netherlands)

    Meijer, R.; Hasan, Noorhaidi; Hendriks, B.; Janssen, F.

    2012-01-01

    This report is the result of a year-long study, conducted from March 2010 to March 2011, of the counter-terrorist strategies of three countries: Indonesia, Algeria and Saudi Arabia. The aim of this study was to acquire insight into the counter-terrorist strategies of these countries, to analyse

  14. Counter design influences the privacy of patients in health care

    NARCIS (Netherlands)

    Mobach, Mark P.

    2009-01-01

    A re-furnishing of counter areas in primary health care was used to assess patient privacy and its influences on the nature of conversations in a controlled experiment. Patients in two community-based pharmacies in the Netherlands were assigned to enclosed counters and a queue at distance, or to cou

  15. The IFIN-HH triple coincidence liquid scintillation counter

    CSIR Research Space (South Africa)

    Razdolescu, AC

    2006-10-01

    Full Text Available at IFIN-HH using a 3 H standard. The performances of the IFIN-HH TDCR counter was checked against the measurement results of the TDCR counters of CSIR NML (South Africa), RC (Poland) and LNHB (France). A set of ready-to-measure Ni-63 sources in liquid...

  16. Investigations in the upper load range of stratified operation with injection pressures up to 1000 bar; Untersuchungen im oberen Lastbereich des Schichtbetriebes bei Einspritzdruecken bis 1000 bar

    Energy Technology Data Exchange (ETDEWEB)

    Buri, Stefan; Busch, Steve; Kubach, Heiko; Spicher, Ulrich [Karlsruhe Univ. (DE). Inst. fuer Kolbenmaschinen (IFKM)

    2010-07-01

    This paper presents the results of recent research that has been performed on a single-cylinder spray-guided DISI engine at the Institut fuer Kolbenmaschinen. A production multihole injector is used as a baseline and compared with a specially adapted injector at higher injection pressures. Injection pressures of up to 1000 bar are utilized to investigate the combustion and emissions characteristics at the stability limit of stratified combustion. With the modified injector, measurements with the two-color method are applied to analyze this operating condition in terms of soot formation. Included are results for a spark timing variation with 1000 bar injection pressure, an injection pressure variation with constant spark timing, and fuel consumption-optimized engine operating parameters in order to analyze realistic operating points. The benefits of injecting fuel at higher pressures are described, as are the limitations of the experimental setup. (orig.)

  17. Design of a novel quantum reversible ternary up-counter

    Science.gov (United States)

    Houshmand, Pouran; Haghparast, Majid

    2015-08-01

    Reversible logic has been recently considered as an interesting and important issue in designing combinational and sequential circuits. The combination of reversible logic and multi-valued logic can improve power dissipation, time and space utilization rate of designed circuits. Only few works have been reported about sequential reversible circuits and almost there are no paper exhibited about quantum ternary reversible counter. In this paper, first we designed 2-qutrit and 3-qutrit quantum reversible ternary up-counters using quantum ternary reversible T-flip-flop and quantum reversible ternary gates. Then we proposed generalized quantum reversible ternary n-qutrit up-counter. We also introduced a new approach for designing any type of n-qutrit ternary and reversible counter. According to the results, we can conclude that applying second approach quantum reversible ternary up-counter is better than the others.

  18. Electrovacuum Static Counter-Rotating Relativistic Dust Disks

    CERN Document Server

    González, G A

    2002-01-01

    A detailed study of the Counter-Rotating Model (CRM) for generic electrostatic (magnetostatic) axially symmetric thin disks without radial pressure is presented. We find a general constraint over the counter-rotating tangential velocities needed to cast the surface energy-momentum tensor of the disk as the superposition of two counter-rotating charged dust fluids. We then show that this constraint is satisfied if we take the two counter-rotating streams as circulating along electrogeodesics with equal and opposite tangential velocities. We also find explicit expressions for the energy densities, electrostatic (magnetostatic) charge densities and velocities of the counter-rotating fluids. Three specific examples are considered where we obtain some CRM well behaved based in simple solutions to the Einstein-Maxwell equations. The considered solutions are Reissner-Nordstrom in the electrostatic case, its magnetostatic counterpart and two solutions obtained from Taub-NUT and Kerr solutions.

  19. DESIGN OF TERNARY COUNTER BASED ON ADIABATIC DOMINO CIRCUIT

    Institute of Scientific and Technical Information of China (English)

    Yang Qiankun; Wang Pengjun; Zheng Xuesong

    2013-01-01

    By researching the ternary counter and low power circuit design method,a novel design of low power ternary Domino counter on switch-level is proposed.Firstly,the switch-level structure expression of ternary loop operation circuit with enable pin is derived according to the switch-signal theory,and the one bit ternary counter is obtained combining the ternary adiabatic Domino literal operation circuit and buffer.Then the switch-level structure expression of enable signal circuit is derived,and the four bits ternary counter is obtained by cascade connection.Finally,the circuit is simulated by Spice tool and the output waveforms transform in proper order indicating that the logic function is correct.The energy consumption of the four bits ternary adiabatic Domino counter is 63% less than the conventional Domino counterpart.

  20. The search for stability: bar displacement in three series of pectus excavatum patients treated with the Nuss technique

    Directory of Open Access Journals (Sweden)

    Miguel Lia Tedde

    2011-01-01

    Full Text Available OBJECTIVES: To compare bar displacement and complication rates in three retrospective series of patients operated on by the same surgical team. METHOD: A retrospective medical chart analysis of the three patient series was performed. In the first series, the original, unmodified Nuss technique was performed. In the second, we used the ''third point fixation'' technique,and in the last series, the correction was performed with modifications to the stabilizer and stabilizer position. RESULTS: There were no deaths in any of the series. Minor complications occurred in six (4.9% patients: pneumothorax with spontaneous resolution (2, suture site infection (2, and bar displacement without the reoperation need (2. Major complications were observed in eight (6.5% patients: pleural effusion requiring drainage (1, foreign body reaction to the bar (1, pneumonia and shock septic (1, cardiac perforation (1, skin erosion/seroma (1, and displacement that necessitated a second operation to remove the bar within the 30 days of implantation (3. All major complications occurred in the first and second series. CONCLUSION: The elimination of fixation wires, the use of shorter bars and redesigned stabilizers placed in a more medial position results in a better outcome for pectus excavatum patients treated with the Nuss technique. With bar displacement and instability no longer significant postoperative risks, the Nuss technique should be considered among the available options for the surgical correction of pectus excavatum in pediatric patients.

  1. Machine-vision-based bar code scanning for long-range applications

    Science.gov (United States)

    Banta, Larry E.; Pertl, Franz A.; Rosenecker, Charles; Rosenberry-Friend, Kimberly A.

    1998-10-01

    Bar code labeling of products has become almost universal in most industries. However, in the steel industry, problems with high temperatures, harsh physical environments and the large sizes of the products and material handling equipment have slowed implementation of bar code based systems in the hot end of the mill. Typical laser-based bar code scanners have maximum scan distances of only 15 feet or so. Longer distance models have been developed which require the use of retro reflective paper labels, but the labels must be very large, are expensive, and cannot stand the heat and physical abuse of the steel mill environment. Furthermore, it is often difficult to accurately point a hand held scanner at targets in bright sunlight or at long distances. An automated product tag reading system based on CCD cameras and computer image processing has been developed by West Virginia University, and demonstrated at the Weirton Steel Corporation. The system performs both the pointing and reading functions. A video camera is mounted on a pan/tilt head, and connected to a personal computer through a frame grabber board. The computer analyzes the images, and can identify product ID tags in a wide-angle scene. It controls the camera to point at each tag and zoom for a closeup picture. The closeups are analyzed and the program need both a barcode and the corresponding alphanumeric code on the tag. This paper describes the camera pointing and bar-code reading functions of the algorithm. A companion paper describes the OCR functions.

  2. Minimum bar size for flexure testing of irradiated SiC/SiC composite

    Energy Technology Data Exchange (ETDEWEB)

    Youngblood, G.E.; Jones, R.H. [Pacific Northwest National Lab., Richland, WA (United States)

    1998-03-01

    This report covers material presented at the IEA/Jupiter Joint International Workshop on SiC/SiC Composites for Fusion structural Applications held in conjunction with ICFRM-8, Sendai, Japan, Oct. 23-24, 1997. The minimum bar size for 4-point flexure testing of SiC/SiC composite recommended by PNNL for irradiation effects studies is 30 {times} 6 {times} 2 mm{sup 3} with a span-to-depth ratio of 10/1.

  3. How can double-barred galaxies be long-lived?

    CERN Document Server

    Wozniak, Herve

    2015-01-01

    Double-barred galaxies account for almost one third of all barred galaxies, suggesting that secondary stellar bars, which are embedded in large-scale primary bars, are long-lived structures. However, up to now it has been hard to self-consistently simulate a disc galaxy that sustains two nested stellar bars for longer than a few rotation periods. N-body/hydrodynamical simulations including star formation recipes have been performed. Their properties have been compared with the most recent observational data in order to prove that they are representative of double-barred galaxies, even SB0. Overlaps in dynamical resonances and bar modes have been looked for using Fourier spectrograms. Double-barred galaxies have been successfully simulated with lifetimes as long as 7 Gyr. The stellar population of the secondary bar is younger on average than for the primary large-scale bar. An important feature of these simulations is the absence of any resonance overlap for several Gyr. In particular, there is no overlap betw...

  4. Non-axisymmetric vertical velocity dispersion distributions produced by bars

    CERN Document Server

    Du, Min; Debattista, Victor P

    2016-01-01

    In barred galaxies, the contours of stellar velocity dispersions ($\\sigma$) are generally expected to be oval and aligned with the orientation of bars. However, many double-barred (S2B) galaxies exhibit distinct $\\sigma$ peaks on the minor axis of inner bar, which we termed "$\\sigma$-humps," while two local $\\sigma$ minima are present close to the ends of inner bars, i.e., "$\\sigma$-hollows." Analysis of numerical simulations shows that $\\sigma_z$-humps or hollows should play an important role in generating the observed $\\sigma$-humps+hollows in low-inclination galaxies. In order to systematically investigate the properties of $\\sigma_z$ in barred galaxies, we apply the vertical Jeans equation to a group of well-designed three-dimensional bar+disk(+bulge) models. A vertically thin bar can lower $\\sigma_z$ along the bar and enhance it perpendicular to the bar, thus generating $\\sigma_z$-humps+hollows. Such a result suggests that $\\sigma_z$-humps+hollows can be generated by the purely dynamical response of star...

  5. Finite Element Simulations to Explore Assumptions in Kolsky Bar Experiments.

    Energy Technology Data Exchange (ETDEWEB)

    Crum, Justin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-05

    The chief purpose of this project has been to develop a set of finite element models that attempt to explore some of the assumptions in the experimental set-up and data reduction of the Kolsky bar experiment. In brief, the Kolsky bar, sometimes referred to as the split Hopkinson pressure bar, is an experimental apparatus used to study the mechanical properties of materials at high strain rates. Kolsky bars can be constructed to conduct experiments in tension or compression, both of which are studied in this paper. The basic operation of the tension Kolsky bar is as follows: compressed air is inserted into the barrel that contains the striker; the striker accelerates towards the left and strikes the left end of the barrel producing a tensile stress wave that propogates first through the barrel and then down the incident bar, into the specimen, and finally the transmission bar. In the compression case, the striker instead travels to the right and impacts the incident bar directly. As the stress wave travels through an interface (e.g., the incident bar to specimen connection), a portion of the pulse is transmitted and the rest reflected. The incident pulse, as well as the transmitted and reflected pulses are picked up by two strain gauges installed on the incident and transmitted bars as shown. By interpreting the data acquired by these strain gauges, the stress/strain behavior of the specimen can be determined.

  6. Dependence of Barred Galaxy Fraction on Galaxy Properties and Environment

    CERN Document Server

    Lee, Gwang-Ho; Lee, Myung Gyoon; Choi, Yun-Young

    2011-01-01

    We investigate the dependence of occurrence of bars in galaxies on galaxy properties and environment. We use a volume-limited sample of 33,391 galaxies brighter than $M_{r}=-19.5+5$log$h$ at $0.02\\le z\\le0.05489$, drawn from the SDSS DR 7. We classify the galaxies into early and late types, and identify bars by visual inspection. Among 10,674 late-type galaxies with axis ratio $b/a>0.60$, we find 3,240 barred galaxies ($f_{bar}=30.4%$) which divide into 2,542 strong bars ($f_{SB1}=23.8%$) and 698 weak bars ($f_{SB2}=6.5%$). We find that $f_{SB1}$ increases as $u-r$ color becomes redder, and that it has a maximum value at intermediate velocity dispersion ($\\sigma\\simeq$150 km s$^{-1}$). This trend suggests that strong bars are dominantly hosted by intermediate-mass systems. Weak bars prefer bluer galaxies with lower mass and lower concentration. In the case of strong bars, their dependence on the concentration index appears only for massive galaxies with $\\sigma>150$ km s${}^{-1}$. We also find that $f_{bar}$ ...

  7. Morphodynamics of a pseudomeandering gravel bar reach

    Science.gov (United States)

    Bartholdy, J.; Billi, P.

    2002-01-01

    A large number of rivers in Tuscany have channel planforms, which are neither straight nor what is usually understood as meandering. In the typical case, they consist of an almost straight, slightly incised main channel fringed with large lateral bars and lunate-shaped embayments eroded into the former flood plain. In the past, these rivers have not been recognised as an individual category and have often been considered to be either braided or meandering. It is suggested here that this type of river planform be termed pseudomeandering. A typical pseudomeandering river (the Cecina River) is described and analysed to investigate the main factors responsible for producing this channel pattern. A study reach (100×300 m) was surveyed in detail and related to data on discharge, channel changes after floods and grain-size distribution of bed sediments. During 18 months of topographic monitoring, the inner lateral bar in the study reach expanded and migrated towards the concave outer bank which, concurrently, retreated by as much as 25 m. A sediment balance was constructed to analyse bar growth and bank retreat in relation to sediment supply and channel morphology. The conditions necessary to maintain the pseudomeandering morphology of these rivers by preventing them from developing a meandering planform, are discussed and interpreted as a combination of a few main factors such as the flashy character of floods, sediment supply (influenced by both natural processes and human impact), the morphological effects of discharges with contrasting return intervals and the short duration of flood events. Finally, the channel response to floods with variable sediment transport capacity (represented by bed shear stress) is analysed using a simple model. It is demonstrated that bend migration is associated with moderate floods while major floods are responsible for the development of chute channels, which act to suppress bend growth and maintain the low sinuosity configuration of

  8. Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, B.

    2006-06-27

    The authors present a search for the decay of a B{sup 0} or {bar B}{sup 0} meson to a {bar K}*{sup 0} K{sup 0} or K*{sup 0} {bar K}{sup 0} final state, using a sample of approximately 232 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric energy e{sup +}e{sup -} collider at SLAC. The measured branching fraction is {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) = (0.2{sub -0.8, -0.3}{sup +0.9, +0.1}) x 10{sup -6}. They obtain the following upper limit for the branching fraction at 90% confidence level: {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) < 1.9 x 10{sup -6}. They use our result to constrain the Standard Model prediction for the deviation of the CP asymmetry in B{sup 0} {yields} {phi}K{sup 0} from sin 2{beta}.

  9. Strong Interactions Physics at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Pioppi, M.

    2005-03-14

    Recent results obtained by BABAR experiment and related to strong interactions physics are presented, with particular attention to the extraction of the first four hadronic-mass moments and the first three lepton-energy moments in semileptonic decays. From a simultaneous fit to the moments, the CKM element |V{sub cb}|, the inclusive B {yields} X{sub c}lv and other heavy quark parameters are derived. The second topic is the ambiguity-free measurement of cos(2{beta}) in B {yields} J/{Psi}K* decays. With approximately 88 million of B{bar B} pairs, negative solutions for cos(2{beta}) are excluded at 89%.

  10. P-bar ANDA at FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Schepers, G., E-mail: g.schepers@gsi.de [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH (Germany); Collaboration: P-bar ANDA Collaboration

    2012-12-15

    The P-bar ANDA experiment represents the central part of the hadron physics branch of the antiproton program of the new Facility for Antiproton and Ion Research (FAIR) at Darmstadt/Germany. It will investigate antiproton annihilations with an almost 4{pi} acceptance from two sequent spectrometer in the momentum range from 1.5 to 15 GeV/c. The gluon rich reaction product of antiproton-proton and antiproton-nucleus collisions on one hand and the high intensity and phase space cooled antiproton beam of the HESR on the other hand constitutes an ideal environment to study the sector of non-conventional hadronic states.

  11. CP Violation at BaBar

    Energy Technology Data Exchange (ETDEWEB)

    Yeche, Christophe; /DSM, DAPNIA, Saclay

    2011-11-15

    We report recent measurements of the three CKM angles of the Unitarity Triangle using about 383 millions b{bar b} pairs collected with the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC. The results of the angles ({beta}, {alpha}, {gamma}) of the unitarity triangle are consistent with Belle results, and with other CKM constraints such as the measurement of {epsilon}{sub K}, the length of the sides of the unitarity triangle determined from the measurements of {Delta}m{sub d}, {Delta}m{sub s}, |V{sub ub}|. This is an impressive confirmation of Standard Model in quark-flavor sector.

  12. Technological Innovations to Counter CBRNE Threat Vectors and Ecotage

    Science.gov (United States)

    Vaseashta, Ashok

    The ubiquitous presence of sensors for enhanced situational awareness necessitates an innovative, articulate, and focused review of their design, architecture, functionality, and interoperability. A comprehensive overview of the latest and state-of-the art technological innovations in point and stand-off sensing/detection platforms with the objective of countering threats arising from chemical-biological-nuclear-high yield explosives (CBRNE) is the focus of this investigation. Ongoing research efforts and future research directions based on advanced approaches, including nanomaterials to develop materials, devices, and systems for potential use in sensing and detection of such threat vectors are articulated. The concept of advanced sciences convergences is introduced to examine the feasibility of potentially new and innovative research directions for persistent surveillance of CBRNE agents and infectious diseases. The intentional release of such agents in the environment constitutes ecological sabotage. Advanced sensing/detection platforms for CBRNE are used to detect threats to the environment. Issues associated with the use of nanomaterials regarding societal implications and dual-use concerns are addressed by studying fate and transport and the development of guidelines for a risk-assessment model. A roadmap of the future of nanomaterials, in terms of complexity, a nexus of disciplines, and its emerging potential to provide advanced, futuristic, and a paradigm-shifting platform is presented.

  13. Double pion production in $NN$ and $\\bar{N}N$ collisions

    CERN Document Server

    Cao, Xu; Xu, Hu-Shan

    2010-01-01

    With an effective Lagrangian approach, we give a full analysis on the $NN \\to NN\\pi\\pi$ and $\\bar{N}N\\to \\bar{N}N\\pi\\pi$ reactions by exploring the roles of various resonances with mass up to 1.72 GeV. We find large contributions from $\\Delta$, $N^*(1440)$, $\\Delta(1600)$ and $\\Delta(1620)$ resonances. Our calculations also indicate sizeable contributions from nucleon poles for the energies close to the threshold. A good description to the existing data of different isospin channels of $NN\\to NN\\pi\\pi$ and $\\bar{N}N\\to \\bar{N}N\\pi\\pi$ for beam energies up to 2.2 GeV is reached. Our results provide important implications to the ABC effect and guildlines to the future experimental projects at COSY, HADES and HIRFL-CSR. We point out that the \\={P}ANDA at FAIR could be an essential place for studying the properties of baryon resonances and the data with baryon and anti-baryon in final states are worth analyzing.

  14. An Implementation of Bayesian Adaptive Regression Splines (BARS in C with S and R Wrappers

    Directory of Open Access Journals (Sweden)

    Garrick Wallstrom

    2007-02-01

    Full Text Available BARS (DiMatteo, Genovese, and Kass 2001 uses the powerful reversible-jump MCMC engine to perform spline-based generalized nonparametric regression. It has been shown to work well in terms of having small mean-squared error in many examples (smaller than known competitors, as well as producing visually-appealing fits that are smooth (filtering out high-frequency noise while adapting to sudden changes (retaining high-frequency signal. However, BARS is computationally intensive. The original implementation in S was too slow to be practical in certain situations, and was found to handle some data sets incorrectly. We have implemented BARS in C for the normal and Poisson cases, the latter being important in neurophysiological and other point-process applications. The C implementation includes all needed subroutines for fitting Poisson regression, manipulating B-splines (using code created by Bates and Venables, and finding starting values for Poisson regression (using code for density estimation created by Kooperberg. The code utilizes only freely-available external libraries (LAPACK and BLAS and is otherwise self-contained. We have also provided wrappers so that BARS can be used easily within S or R.

  15. Investigating the nuclear activity of barred spiral galaxies: the case of NGC 1672

    CERN Document Server

    Jenkins, L P; Colbert, E J M; Koribalski, B; Kuntz, K D; Levan, A J; Ojha, R; Roberts, T P; Ward, M J; Zezas, A

    2011-01-01

    We have performed an X-ray study of the nearby barred spiral galaxy NGC1672, primarily to ascertain the effect of the bar on its nuclear activity. We use both Chandra and XMM-Newton observations to investigate its X-ray properties, together with supporting high-resolution optical imaging data from the Hubble Space Telescope (HST), infrared imaging from the Spitzer Space Telescope, and ATCA ground-based radio data. We detect 28 X-ray sources within the D25 area of the galaxy, many of which correlate spatially with star-formation in the bar and spiral arms, while two are identified as background galaxies in the HST images. Nine of the X-ray sources are ULXs, with the three brightest (LX > 5E39 erg/s) located at the ends of the bar. With the spatial resolution of Chandra, we are able to show for the first time that NGC1672 possesses a hard (Gamma~1.5) nuclear X-ray source with a 2-10 keV luminosity of 4E38 erg/s. This is surrounded by an X-ray bright circumnuclear star-forming ring, comprised of point sources an...

  16. Complex central structures suggest complex evolutionary paths for barred S0 galaxies

    CERN Document Server

    Dullo, Bililign T; Knapen, Johan H

    2016-01-01

    We investigate three barred lenticular galaxies (NGC 2681, NGC 3945 and NGC 4371) which were previously reported to have complex central structures but without a detailed structural analysis of these galaxies' high-resolution data. We have therefore performed four- to six-component (pseudo-)bulge/disk/bar/ring/point source) decompositions of the composite (Hubble Space Telescope plus ground-based) surface brightness profiles. We find that NGC 2681 hosts three bars, while NGC 3945 and NGC 4371 are double- and single-barred galaxies, respectively, in agreement with past isophotal analysis. We find that the bulges in these galaxies are compact, and have S\\'ersic indices of $n\\sim 2.2 - 3.6$ and stellar masses of $M_{*}$ $\\sim 0.28\\times10^{10} - 1.1\\times10^{10} M_{\\sun}$. NGC 3945 and NGC 4371 have intermediate-scale `pseudo-bulges' that are well described by a S\\'ersic model with low $n \\la 0.5$ instead of an exponential ($n=1$) profile as done in the past. We measure emission line fluxes enclosed within 9 dif...

  17. Smoking restrictions in bars and bartender smoking in the US, 1992-2007.

    Science.gov (United States)

    Bitler, Marianne P; Carpenter, Christopher; Zavodny, Madeline

    2011-05-01

    The present work is an analysis of whether adoption of state clean indoor air laws (SCIALs) covering bars reduces the proportion of bartenders who smoke primarily by reducing smoking among people already employed as bartenders when restrictions are adopted or by changing the composition of the bartender workforce with respect to smoking behaviours. Logistic regressions were estimated for a variety of smoking outcomes, controlling for individual demographic characteristics, state economic characteristics, and state, year, and month fixed effects, using data on 1380 bartenders from the 1992-2007 Tobacco Use Supplement to the Current Population Survey combined with data on SCIALs from ImpacTeen. State restrictions on smoking in bars are negatively associated with whether a bartender smokes, with a 1-point increase in restrictiveness (on a scale of 0-3) associated with a 5.3% reduction in the odds of smoking. Bar SCIALs are positively associated with the likelihood a bartender reports never having smoked cigarettes but not with the likelihood a bartender reports having been a former smoker. State clean indoor air laws covering bars appear to reduce smoking among bartenders primarily by changing the composition of the bartender workforce with respect to smoking rather than by reducing smoking among people already employed as bartenders when restrictions are adopted. Such laws may nonetheless be an important public health tool for reducing secondhand smoke.

  18. Rings and spirals in barred galaxies. III. Further comparisons and links to observations

    CERN Document Server

    Athanassoula, E; Bosma, A; Masdemont, J J

    2010-01-01

    In a series of papers, we propose a theory to explain the formation and properties of rings and spirals in barred galaxies. The building blocks of these structures are orbits guided by the manifolds emanating from the unstable Lagrangian points located near the ends of the bar. In this paper, the last of the series, we present more comparisons of our theoretical results to observations and also give new predictions for further comparisons. Our theory provides the right building blocks for the rectangular-like bar outline and for ansae. We consider how our results can be used to give estimates for the pattern speed values, as well as their effect on abundance gradients in barred galaxies. We present the kinematics along the manifold loci, to allow comparisons with the observed kinematics along the ring and spiral loci. We consider gaseous arms and their relations to stellar ones. We discuss several theoretical aspects and stress that the orbits that constitute the building blocks of the spirals and rings are c...

  19. The LHCb pentaquark as a $\\bar{D}^*\\Sigma_c-\\bar{D}^*\\Sigma_c^*$ molecular state

    CERN Document Server

    Roca, L.; Oset, E.

    2015-01-01

    We perform a theoretical analysis of the $\\Lambda_b \\to J/\\psi K^- p$ reaction from where a recent LHCb experiment extracts a $\\Lambda(1405)$ contribution in the $K^- p$ spectrum close to threshold and two baryon states of hidden charm in the $J/\\psi\\,p$ spectrum. We recall that baryon states of this type have been theoretically predicted matching the mass, width and $J^P$ of the experiment, concretely some states built up from the $J/\\psi\\, N$, $\\bar D^* \\Lambda_c$, $\\bar D^* \\Sigma_c$, $\\bar D \\Sigma^*_c$ and $\\bar D^* \\Sigma^*_c$ coupled channels. We assume that the observed narrow state around 4450 MeV has this nature and we are able to describe simultaneously the shapes and relative strength of the the $K^- p$ mass distribution close to threshold and the peak of the $J/\\psi\\,p$ distribution, with values of the $J/\\psi\\, p$ coupling to the resonance in line with the theoretical ones. The non trivial matching of many properties gives support to a $J^P=3/2^-$ assignment to this state and to its nature as a ...

  20. Automated multisyringe stir bar sorptive extraction using robust montmorillonite/epoxy-coated stir bars.

    Science.gov (United States)

    Ghani, Milad; Saraji, Mohammad; Maya, Fernando; Cerdà, Víctor

    2016-05-01

    Herein we present a simple, rapid and low cost strategy for the preparation of robust stir bar coatings based on the combination of montmorillonite with epoxy resin. The composite stir bar was implemented in a novel automated multisyringe stir bar sorptive extraction system (MS-SBSE), and applied to the extraction of four chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol) as model compounds, followed by high performance liquid chromatography-diode array detection. The different experimental parameters of the MS-SBSE, such as sample volume, selection of the desorption solvent, desorption volume, desorption time, sample solution pH, salt effect and extraction time were studied. Under the optimum conditions, the detection limits were between 0.02 and 0.34μgL(-1). Relative standard deviations (RSD) of the method for the analytes at 10μgL(-1) concentration level ranged from 3.5% to 4.1% (as intra-day RSD) and from 3.9% to 4.3% (as inter-day RSD at 50μgL(-1) concentration level). Batch-to-batch reproducibility for three different stir bars was 4.6-5.1%. The enrichment factors were between 30 and 49. In order to investigate the capability of the developed technique for real sample analysis, well water, wastewater and leachates from a solid waste treatment plant were satisfactorily analyzed.

  1. Implant-retained mandibular bar-supported overlay dentures: a finite element stress analysis of four different bar heights.

    Science.gov (United States)

    Rismanchian, Mansoor; Dakhilalian, Mansour; Bajoghli, Farshad; Ghasemi, Ehsan; Sadr-Eshkevari, Pooyan

    2012-04-01

    Proper stress distribution on dental implants is necessary in bar-retained implant overlay dentures. We aimed to comparatively assess this stress distribution according to different bar heights using finite element models. A three-dimensional (3D) computer model of mandible with 2 implants (ITI, 4.1 mm diameter and 12 mm length) in canine areas and an overlying implant-supported bar-retained overlay denture were simulated with 0-, 1-, 2-, and 3-mm bar heights using ABAQUS software. A vertical force was applied to the left first molar and gradually increased from 0 to 50 N. The resultant stress distribution was evaluated. Bars of 1 and 2 mm in height transferred the least stress to the implants (3.882 and 3.896 MPa, respectively). The 0-mm height of the bar connection transferred the highest stress value (4.277 MPa). The amount of stress transferred by 3-mm heights of the bar connection was greater than that of 1- and 2-mm bar connections and smaller than that of 0-mm bar connection (4.165 kgN). This 3D finite element analysis study suggested that the use of Dolder bar attachment with 1- and 2-mm heights could be associated with appropriate stress distribution for implant-retained overlay dentures.

  2. Counter-Rotating Tandem Motor Drilling System

    Energy Technology Data Exchange (ETDEWEB)

    Kent Perry

    2009-04-30

    Gas Technology Institute (GTI), in partnership with Dennis Tool Company (DTC), has worked to develop an advanced drill bit system to be used with microhole drilling assemblies. One of the main objectives of this project was to utilize new and existing coiled tubing and slimhole drilling technologies to develop Microhole Technology (MHT) so as to make significant reductions in the cost of E&P down to 5000 feet in wellbores as small as 3.5 inches in diameter. This new technology was developed to work toward the DOE's goal of enabling domestic shallow oil and gas wells to be drilled inexpensively compared to wells drilled utilizing conventional drilling practices. Overall drilling costs can be lowered by drilling a well as quickly as possible. For this reason, a high drilling rate of penetration is always desired. In general, high drilling rates of penetration (ROP) can be achieved by increasing the weight on bit and increasing the rotary speed of the bit. As the weight on bit is increased, the cutting inserts penetrate deeper into the rock, resulting in a deeper depth of cut. As the depth of cut increases, the amount of torque required to turn the bit also increases. The Counter-Rotating Tandem Motor Drilling System (CRTMDS) was planned to achieve high rate of penetration (ROP) resulting in the reduction of the drilling cost. The system includes two counter-rotating cutter systems to reduce or eliminate the reactive torque the drillpipe or coiled tubing must resist. This would allow the application of maximum weight-on-bit and rotational velocities that a coiled tubing drilling unit is capable of delivering. Several variations of the CRTDMS were designed, manufactured and tested. The original tests failed leading to design modifications. Two versions of the modified system were tested and showed that the concept is both positive and practical; however, the tests showed that for the system to be robust and durable, borehole diameter should be substantially larger

  3. Counter-terrorism threat prediction architecture

    Science.gov (United States)

    Lehman, Lynn A.; Krause, Lee S.

    2004-09-01

    This paper will evaluate the feasibility of constructing a system to support intelligence analysts engaged in counter-terrorism. It will discuss the use of emerging techniques to evaluate a large-scale threat data repository (or Infosphere) and comparing analyst developed models to identify and discover potential threat-related activity with a uncertainty metric used to evaluate the threat. This system will also employ the use of psychological (or intent) modeling to incorporate combatant (i.e. terrorist) beliefs and intent. The paper will explore the feasibility of constructing a hetero-hierarchical (a hierarchy of more than one kind or type characterized by loose connection/feedback among elements of the hierarchy) agent based framework or "family of agents" to support "evidence retrieval" defined as combing, or searching the threat data repository and returning information with an uncertainty metric. The counter-terrorism threat prediction architecture will be guided by a series of models, constructed to represent threat operational objectives, potential targets, or terrorist objectives. The approach would compare model representations against information retrieved by the agent family to isolate or identify patterns that match within reasonable measures of proximity. The central areas of discussion will be the construction of an agent framework to search the available threat related information repository, evaluation of results against models that will represent the cultural foundations, mindset, sociology and emotional drive of typical threat combatants (i.e. the mind and objectives of a terrorist), and the development of evaluation techniques to compare result sets with the models representing threat behavior and threat targets. The applicability of concepts surrounding Modeling Field Theory (MFT) will be discussed as the basis of this research into development of proximity measures between the models and result sets and to provide feedback in support of model

  4. Anti-seismic behavior of HRB400 reinforced steel bars

    Institute of Scientific and Technical Information of China (English)

    QIN Bin; SHENG Guang-min; GONG Shi-hong

    2005-01-01

    The properties of anti-seismic HRB400 steel bars with 25 mm diameter were systematically investigated. The results showed that the properties of the HRB400 reinforced steel bars had been greatly enhanced comparing with HRB335 steel bars, i.e. coordination of strength and ductility, strain-aging sensibility, low temperature impact toughness, weld ability and high strain low cycle fatigue. The ductile-brittle transit temperatures of hot-rolled and strain-aged steel bars were evaluated as -17℃ and-8℃ respectively, and the low temperature impact toughness of HRB400 steel bars remains to be improved. Transmission electron microscopy (TEM) and electron diffraction showed little vanadium existed in ferrite as VN, most of which existed in pearlite as alloy cementite which resulted in the declination of impact toughness. Methods were suggested to improve the anti-seismic properties of steel bars.

  5. Shepherding Tidal Debris with the Galactic Bar: The Ophiuchus Stream

    CERN Document Server

    Hattori, Kohei; Sanders, Jason L

    2015-01-01

    The dynamics of stellar streams in rotating barred potentials is explained for the first time. Naturally, neighbouring stream stars reach pericentre at slightly different times. In the presence of a rotating bar, these neighbouring stream stars experience different bar orientations during pericentric passage and hence each star receives a different torque from the bar. These differing torques reshape the angular momentum and energy distribution of stars in the stream, which in turn changes the growth rate of the stream. For a progenitor orbiting in the same sense as the bar's rotation and satisfying a resonance condition, the resultant stream can be substantially shorter or longer than expected, depending on whether the pericentric passages of the progenitor occur along the bar's minor or major axis respectively. We present a full discussion of this phenomenon focusing mainly on streams confined to the Galactic plane. In stark contrast with the evolution in static potentials, which give rise to streams that g...

  6. Barómetro industrial LEON 50

    Directory of Open Access Journals (Sweden)

    Javier Álvarez Martínez

    2005-12-01

    Full Text Available El Barómetro indusrial LEON 50 es un trabajo de investigación que tiene como objetivo esencial identificar características patrimoniales, financieras y económicas de una muestra de empresas que actúan dentro de la industria leonesa. El soporte de este estudio empírico es la información contable anual auditada que depositan en el Registro Mercantil las empresas integrantes de la muestra, recogida básicamente en el balance de situación, la cuenta de pérdidas y ganacias y el cuadro de finaciación referidos al bienio 2001-02. En esencia, el Barómetro Industrial LEON 50 pretende ser un avance en el análisis, diagnóstico y mejor conocimiento de la industria regional, aportando una visión actualizada sobre estrategias y pautas de actuación empresarial que serán objeto de observación en períodos

  7. COUNTER-PUNISHMENT, COMMUNICATION AND COOPERATION AMONG PARTNERS

    Directory of Open Access Journals (Sweden)

    Giulia eAndrighetto

    2016-04-01

    Full Text Available We study how communication affects cooperation in an experimental public goods environment with punishment and counter-punishment opportunities. Participants interacted over thirty rounds in fixed groups with fixed identifiers that allowed them to trace other group members’ behavior over time. The two dimensions of communication we study are asking for a specific contribution level and having to express oneself when choosing to counter-punish. We conduct four experimental treatments, all involving a contribution stage, a punishment stage and a counter-punishment stage in each round. In the first treatment communication is not possible at any of the stages. The second treatment allows participants to ask for a contribution level at the punishment stage and in the third treatment participants are required to send a message if they decide to counter-punishment. The fourth combines the two communication channels of the second and third treatments. We find that the three treatments involving communication at any of the two relevant stages lead to significantly higher contributions than the baseline treatment. We find no difference between the three treatments with communication. We also relate our results to previous results from treatments without counter-punishment opportunities and do not find that the presence of counter-punishment leads to lower cooperation level. The overall pattern of results shows that given fixed identifiers the key factor is the presence of communication. Whenever communication is possible contributions and earnings are higher than when it is not, regardless of counter-punishment opportunities.

  8. Effect of Counter Electrode in Electroformation of Giant Vesicles

    Directory of Open Access Journals (Sweden)

    Shuuhei Oana

    2011-11-01

    Full Text Available Electroformation of cell-sized lipid membrane vesicles (giant vesicles, GVs, from egg yolk phosphatidylcholine, was examined varying the shape of the counter electrode. Instead of a planar ITO (indium tin oxide electrode commonly used, platinum wire mesh was employed as a counter electrode facing lipid deposit on a planar formation electrode. The modification did not significantly alter GV formation, and many GVs of 30–50 µm, some as large as 100 µm, formed as with the standard setup, indicating that a counter electrode does not have to be a complete plane. When the counter electrode was reduced to a set of two parallel platinum wires, GV formation deteriorated. Some GVs formed, but only in close proximity to the counter electrode. Lower electric voltage with this setup no longer yielded GVs. Instead, a large onion-like multilamellar structure was observed. The deteriorated GV formation and the formation of a multilamellar structure seemed to indicate the weakened effect of the electric field on lipid deposit due to insufficient coverage with a small counter electrode. Irregular membranous objects formed by spontaneous swelling of lipid without electric voltage gradually turned into multilamellar structure upon following application of voltage. No particular enhancement of GV formation was observed when lipid deposit on a wire formation electrode was used in combination with a large planar counter electrode.

  9. A dual-detector extended range rem-counter

    CERN Document Server

    Ferrarini, M; Silari, M; Agosteo, S

    2010-01-01

    The design and characterization of a dual-detector spherical rem counter is discussed in this paper. The rem counter is based on a polythene sphere with lead and cadmium insets, designed to host at its centre either an active (He-3 SP9 proportional counter) or a passive (CR39 + B-10 radiator) thermal neutron detector. Its sensitivity ranges from thermal energies up to 1 GeV. A Monte Carlo characterization of this dual-detector rem counter has shown no significant change in the shape of the response curve obtained with the two detectors. The rem counter has been calibrated with a Pu-Be source. An intercomparison in a high-energy neutron field has been carried out at the CERF facility at CERN among the rem counter in the two configurations, two commercial units and the original version of the active LINUS in use at CERN. Both the active and passive versions of the rem counter agree, within the statistical uncertainties, with the CERN LINUS and with the facility reference values. Both versions of the instrument ...

  10. $B_s$-$\\bar{B_s}$ mixing from lattice QCD

    CERN Document Server

    Blossier, B

    2005-01-01

    We study the $B^0_s-\\bar{B^0_s}$ mixing amplitude in Standard Model by computing the relevant hadronic matrix element in the static limit of lattice HQET with the Neuberger light quark action. In the quenched approximation, and after matching to the $\\bar{\\rm MS}$ scheme in QCD, we obtain $\\hat{B}^{\\bar{\\rm MS},{\\rm NLO}}_{B_s}(m_b)=0.940(16)(22)$.

  11. Cereal and nut bars, nutritional quality and storage stability.

    Science.gov (United States)

    Estévez, A M; Escobar, B; Vásquez, M; Castillo, E; Araya, E; Zacarías, I

    1995-06-01

    Six snack-type bars were manufactured, to contain oat and wheat germ and two different walnut levels, agglutinated with natural sweeteners and fats. Two bars also contained toasted amaranth with brown sugar cover and wheat extrudate, while two others, contained puffed instead of toasted amaranth. Water activity (Aw) and moisture were determined in the manufactured products. Quality and sensory evaluation and proximate analysis were carried out on the bars containing highest levels of walnuts (18%). The caloric contribution of the bars was computed by Atwater methods. The nutritional quality of the bars was determined by means of the Protein Efficiency Ratio (PER) and Net Protein Ratio (NPR), and the results were used to obtain relative PER and relative NPR. Samples of the latter bars were kept under accelerated storage for 15 days at 37 degrees C and analyzed every 5 days to determine their Aw, moisture, peroxide and sensory acceptability. The drying time for the cereal - and walnut - based bars was 45 min at 120 degrees C. All bars presented a good fiber supply and the CN1 bar, containing only oat, wheat germ and walnut, had the greatest protein content. In the sensory evaluation, the walnut level with the greatest preference was 18%. PER and NPR values of the bars did not differ significantly showing values approximately 86% that of the casein value. During storage, the moisture and Aw decreased in all the bars. Peroxides remained within the acceptable ranges; acceptability based on sensory evaluation remained best in the bar with toasted amaranth.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. Faraday resonance in dynamical bar instability of differentially rotating stars

    CERN Document Server

    Saijo, Motoyuki

    2008-01-01

    We investigate the nonlinear behaviour of the dynamically unstable rotating star for the bar mode by three-dimensional hydrodynamics in Newtonian gravity. We find that an oscillation along the rotation axis is induced throughout the growth of the unstable bar mode, and that its characteristic frequency is twice as that of the bar mode, which oscillates mainly along the equatorial plane. A possibility to observe Faraday resonance in gravitational waves is demonstrated and discussed.

  13. STABILIZER BARS – CALCULATIONS, CONSTRUCTION AND PRODUCTION METHODS

    Directory of Open Access Journals (Sweden)

    Adam Marek WITTEK

    2015-06-01

    Full Text Available The article outlines the calculation and production methods for stabilizer bars. Modern technological and structural solutions in contemporary cars are reflected also in the construction and manufacturing of stabilizer bars. A proper construction and the selection of parameters influence the strength properties, the weight, durability and reliability as well as the selection of an appropriate production method. The selection of the manufacturing process has a fundamental impact on the quality and durability of the stabilizer bars.

  14. Economic Impact of Cruise Ship Passengers in Bar Harbor, Maine

    OpenAIRE

    Gabe, Todd; Lynch, Colleen; McConnon, James; Allen, Thomas

    2003-01-01

    This report examines the economic impact of cruise ship passengers in Bar Harbor, Maine. In 2002, 64 cruise ships docked in Bar Harbor carrying about 120,000 passengers and crewmembers. The analysis presented in the report is based on 1,080 passenger surveys conducted between August and October of 2002. Economic impact figures are based on a total of 97,190 passengers, which is the capacity of the 64 cruise ships that were scheduled to visit Bar Harbor in 2002.

  15. Particle size dependent response of aerosol counters

    Science.gov (United States)

    Ankilov, A.; Baklanov, A.; Colhoun, M.; Enderle, K.-H.; Gras, J.; Julanov, Yu.; Kaller, D.; Lindner, A.; Lushnikov, A. A.; Mavliev, R.; McGovern, F.; O'Connor, T. C.; Podzimek, J.; Preining, O.; Reischl, G. P.; Rudolf, R.; Sem, G. J.; Szymanski, W. W.; Vrtala, A. E.; Wagner, P. E.; Winklmayr, W.; Zagaynov, V.

    During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions. The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.

  16. Training options for countering nuclear smuggling

    Energy Technology Data Exchange (ETDEWEB)

    Ball, D Y; Erickson, S A

    1999-07-01

    The burden of stopping a nuclear smuggling attempt at the border rests most heavily on the front-line customs inspector. He needs to know how to use the technological tools at his disposal, how to discern tell-tale anomalies in export documents and manifests, how to notice psychological signs of a smuggler's tension, and how to search anything that might hide nuclear material. This means that assistance in the counter-nuclear smuggling training of customs officers is one of the most critical areas of help that the United States can provide. This paper discusses the various modes of specialized training, both in the field and in courses, as well as the types of assistance that can be provided. Training for nuclear customs specialists, and supervisors and managers of nuclear smuggling detection systems is also important, and differs from front-line inspector training in several aspects. The limitations of training and technological tools such as expert centers that will overcome these limitations are also discussed. Training assistance planned by DOE/NN-43 to Russia within the Second Line of Defense program is discussed in the light of these options, and future possibilities for such training are projected.

  17. Over-the-Counter Medications in Pregnancy.

    Science.gov (United States)

    Servey, Jessica; Chang, Jennifer

    2014-10-15

    Many pregnant women take over-the-counter (OTC) medications despite the absence of randomized controlled trials to guide their use during pregnancy. Most data come from case-control and cohort studies. In 1979, the U.S. Food and Drug Administration began reviewing all prescription and OTC medications to develop risk categories for use in pregnancy. Most OTC medications taken during pregnancy are for allergy, respiratory, gastrointestinal, or skin conditions, as well as for general analgesia. Acetaminophen, which is used by about 65% of pregnant women, is generally considered safe during any trimester. Cold medications are also commonly used and are considered safe for short-term use outside of the first trimester. Many gastrointestinal medications are now available OTC. Histamine H2 blockers and proton pump inhibitors have not demonstrated significant fetal effects. Nonsteroidal anti-inflammatory drugs are generally not recommended in pregnancy, especially during organogenesis and in the third trimester. There are even fewer data regarding use of individual herbal supplements. Ginger is considered safe and effective for treating nausea in pregnancy. Topical creams are considered safe based on small studies and previous practice. All OTC medication use should be discussed with patients, and the effects of the symptoms should be balanced with the risks and benefits of each medication. Because of the expanding OTC market, formalized studies are warranted for patients to make a safe and informed decision about OTC medication use during pregnancy.

  18. Shanghai’s Bars:Urban Romance and Sadness

    Institute of Scientific and Technical Information of China (English)

    LiuSha

    2002-01-01

    When speaking of Shanghai’s bars, what comes to people’s minds first must be Hengshan Street, a road known for its variety of bars. For many people, Hengshan Street is a landmark. On this street, bars in bold and unrestrained styles appeal to visitors. In fact, the whole street is a large open bar: the hurly-burly of "Hello" permeates every corner of the street; the resonant singing of "Rainbow Potato" echoes in the night sky; the rock’n roll of "Full House" fascinates passers-by with the wildness of John Lennon; even

  19. Comparing photometric results of real and N-body bars

    CERN Document Server

    Athanassoula, E; Carrasco, L; Bosma, A; De Souza, R E; Recillas, E

    2009-01-01

    We compare the results of the photometrical analysis of barred galaxies with those of a similar analysis from N-body simulations. The photometry is for a sample of nine barred galaxies observed in the J and Ks bands with the CANICA near infrared (NIR) camera at the 2.1-m telescope of the Observatorio Astrofisico Guillermo Haro (OAGH) in Cananea, Sonora, Mexico. The comparison includes radial ellipticity profiles and surface brightness (density for the N-body galaxies) profiles along the bar major and minor axes. We find very good agreement, arguing that the exchange of angular momentum within the galaxy plays a determinant role in the evolution of barred galaxies.

  20. Musculoskeletal demands of progressions for the longswing on high bar.

    Science.gov (United States)

    Irwin, Gareth; Kerwin, David G

    2007-09-01

    Kinetic analyses of the chalked bar longswing on high bar and its associated progressions were used to explain musculoskeletal contributions during the performance of these skills. Data on four international male gymnasts performing three series of chalked bar longswings and eight progressions were recorded. Customized body segment inertia parameters, two-dimensional kinematics (50 Hz), and bar forces (1000 Hz) were used as input to inverse dynamic modelling. The analysis focused on the relative contributions of the knees, hips, and shoulders with root mean squared differences between the chalked bar longswing and the progressions being used to rank the progressions. Seventy per cent of the total work occurred between 200 degrees and 240 degrees of angular rotation in the longswing, 67% of which was contributed by the shoulders. The shoulders were also dominant in all progressions, with the largest such contribution occurring in the looped bar longswing with "no action". The least similar progression was the looped bar pendulum swing, while the most similar was the chalked bar bent knee longswing. This study provides a useful means for ranking progressions based on their kinetic similarity to the chalked bar longswing and builds on earlier research in identifying that progressions can be classified into those similar in physical demand (kinetics) and those similar in geometry (kinematics).

  1. Prediction of Vibration Transmission within Periodic Bar Structures

    DEFF Research Database (Denmark)

    Domadiya, Parthkumar Gandalal; Andersen, Lars Vabbersgaard; Sorokin, Sergey

    2012-01-01

    The present analysis focuses on vibration transmission within semi-infinite bar structure. The bar is consisting of two different materials in a periodic manner. A periodic bar model is generated using two various methods: The Finite Element method (FEM) and a Floquet theory approach. A parameter...... study is carried out regarding the influence of the number of periods at various frequencies within a semi-infinite bar, stop bands are illustrated at certain periodic intervals within the structure. The computations are carried out in frequency domain in the range below 500 Hz. Results from both...

  2. Non-uniform impact excitation of a cylindrical bar

    Science.gov (United States)

    Karp, Baruch; Dorogoy, Avraham; Wang, Zonggang

    2009-06-01

    An experimental and numerical study of a non-uniform impact excitation of a circular bar is reported. In experiments, nine strikers with different contact area were accelerated against a circular bar. Axial surface strain of the impacted bar was measured at several distances from the impinged end to include the near and the far fields. The same experimental conditions were solved numerically using a commercial finite element code. It was demonstrated that the far-field response is insensitive to both the size and the form of the striker's colliding end. The distance at which such insensitivity is set is estimated to be approximately one and a half bar diameters.

  3. Mechanical Engineering Safety Note PEPC Spreader Bar Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Mason, D.

    2001-08-26

    The PEPC Spreader Bar Assembly consists of a spreader bar that will be attached to the PEPC Cell Housing or the Midplane Transportation Fixture during operation. While in use in the OAB (Optics Assembly Building), the Spreader Bar Assembly will be manipulated by the NOID (New Optics Insertion Device). The other critical components of the assembly are the three angular contact bearing swivels that attach the spreader bar to the lifting mechanism and the corner clamps which are used to capture the Cell Housing.

  4. Strain analysis of nonlocal viscoelastic Kelvin bar in tension

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xue-chuan; LEI Yong-jun; ZHOU Jian-ping

    2008-01-01

    Based on viscoelastic Kelvin model and nonlocal relationship of strain and stress, a nonlocal constitutive relationship of viscoelasticity is obtained and the strain response of a bar in tension is studied. By transforming governing equation of the strain analysis into Volterra integration form and by choosing a symmetric exponential form of kernel function and adapting Neumann series, the closed-form solution of strain field of the bar is obtained. The creep process of the bar is presented. When time approaches infinite, the strain of bar is equal to the one of nonlocal elasticity.

  5. On the bar formation mechanism in galaxies with cuspy bulges

    Science.gov (United States)

    Polyachenko, E. V.; Berczik, P.; Just, A.

    2016-11-01

    We show by numerical simulations that a purely stellar dynamical model composed of an exponential disc, a cuspy bulge, and a Navarro-Frenk-White halo with parameters relevant to the Milky Way is subject to bar formation. Taking into account the finite disc thickness, the bar formation can be explained by the usual bar instability, in spite of the presence of an inner Lindblad resonance, that is believed to damp any global modes. The effect of replacing the live halo and bulge by a fixed external axisymmetric potential (rigid models) is studied. It is shown that while the e-folding time of bar instability increases significantly (from 250 to 500 Myr), the bar pattern speed remains almost the same. For the latter, our average value of 55 km s-1 kpc-1 agrees with the assumption that the Hercules stream in the solar neighbourhood is an imprint of the bar-disc interaction at the outer Lindblad resonance of the bar. Vertical averaging of the radial force in the central disc region comparable to the characteristic scale length allows us to reproduce the bar pattern speed and the growth rate of the rigid models, using normal mode analysis of linear perturbation theory in a razor-thin disc. The strong increase of the e-folding time with decreasing disc mass predicted by the mode analysis suggests that bars in galaxies similar to the Milky Way have formed only recently.

  6. Stability of cassava flour-based food bars

    Directory of Open Access Journals (Sweden)

    Erica Caroline da Silva

    2013-03-01

    Full Text Available The consumption of Brazilian cassava has been reduced due to a lack of adjustment to the modern lifestyle. To reverse this trend, new products could be developed specifically targeted to high-value niche markets. Cereal bars stand out as fast food high in nutritional value. A bar formula mimicking cereal bars was prepared using a mixture of Brazilian cassava flour, hydrogenated vegetable fat, dried bananas, ground cashew nuts, and glucose syrup. After being pressed, the bars were dried for 1 hour at 65 °C, packaged in films, and stored under ambient conditions. Its stability was continuously monitored for 210 days in order to ensure its safety and enable its introduction to the market. Texture loss was observed in the packed bars after 90 days of storage, but the sensory characteristics allowed the testers to perceive this tendency after only 30 days of storage. However, chemical, physical, and microbial analyses confirmed that the bars were safe for consumption for 180 days. The results showed that a 45 g cassava flour-based bar enriched with nuts and dried fruits can meet 6% of the recommended daily fiber intake with a caloric value between that of the common cereal bar and that of an energy bar. Adapting the formula with ingredients (fruits, nuts from different regions of Brazil may add value to this traditional product as a fast food.

  7. Multipacting Analysis of the Superconducting Parallel-bar Cavity

    Energy Technology Data Exchange (ETDEWEB)

    S.U. De Silva, J.R. Delayen,

    2011-03-01

    The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. Multipacting can be a limiting factor to the performance of in any superconducting structure. In the parallel-bar cavity the main contribution to the deflection is due to the transverse deflecting voltage, between the parallel bars, making the design potentially prone to multipacting. This paper presents the results of analytical calculations and numerical simulations of multipacting in the parallel-bar cavity with resonant voltage, impact energies and corresponding particle trajectories.

  8. Hardware support for collecting performance counters directly to memory

    Science.gov (United States)

    Gara, Alan; Salapura, Valentina; Wisniewski, Robert W.

    2012-09-25

    Hardware support for collecting performance counters directly to memory, in one aspect, may include a plurality of performance counters operable to collect one or more counts of one or more selected activities. A first storage element may be operable to store an address of a memory location. A second storage element may be operable to store a value indicating whether the hardware should begin copying. A state machine may be operable to detect the value in the second storage element and trigger hardware copying of data in selected one or more of the plurality of performance counters to the memory location whose address is stored in the first storage element.

  9. The Application of Counter-Rotating Turbine in Rocket Turbopump

    Directory of Open Access Journals (Sweden)

    Tang Fei

    2008-01-01

    Full Text Available Counter rotating turbine offers advantages on weight, volume, efficiency, and maneuverability relative to the conventional turbine because of its special architecture. Nowadays, it has been a worldwide research emphasis and has been used widely in the aeronautic field, while its application in the astronautic field is seldom investigated. Researches of counter rotating turbine for rocket turbopump are reviewed in this paper. A primary analysis of a vaneless counter rotating-turbine configuration with rotors of different diameters and rotational speeds is presented. This unconventional configuration meets the requirements of turbopump and may benefit the performance and reliability of rocket engines.

  10. Countering the ‘Natural’ Organizational Self on Social Media

    DEFF Research Database (Denmark)

    Johansen, Trine Susanne

    2017-01-01

    Using narrative as a theoretical and methodological lens, this study explores digital processes of organizational identity construction in the intersection between organization and market.The purpose is to understand the ways in which online interactions produce counter-narratives that contrast......, challenge and contradict organizational self-narration in light of market place skepticism and cynicism. The study identifies three strategies of counter-narrativizing (authenticity, legitimacy and irony) based on juxtaposing pairs of opposites. Moreover, it suggests counter-narration to be a natural...

  11. Development of Laser-Based Handheld Aerosol Particle Counter

    Institute of Scientific and Technical Information of China (English)

    CHEN Chang; LI Hui

    2005-01-01

    The JC-CA300 handheld Aerosol particle counter is designed and developed based on light scattering principle. The JC-CA300 counter is composed of optical sensor, DSP component and microprocessor unit. The hardware architecture is designed in compact style by SMT IC chips. The whole counter weight is less than 2 pounds. With 32K RAM space, the JC-CA300 can store 500 sampling records and support standard printer and communicate with a computer through RS232 interface. Based on experimental results, the main performance of JC-CA300 is better than that of the ARTI'S HHPC-6 instrument.

  12. The Quark Flavor Violating Higgs Decay $h \\rightarrow \\bar b s + b \\bar s$ in the MSSM

    CERN Document Server

    Gómez, M E; Rehman, M

    2015-01-01

    We study the quark flavor violating Higgs-boson decay $h \\rightarrow \\bar b s + b \\bar s$ in the Minimal Supersymmetric Standard Model (MSSM). The decay is analyzed first in a model independent, and in a second step in the minimal flavor violationg (MFV) Constrained MSSM. The experimental constraints from $B$-Physics observables (BPO) and electroweak precision observables (EWPO) are also calculated and imposed on the parameter space. It is shown that in some cases the EWPO restrict the flavor violating parameter space stronger than the BPO. In the model independent analysis values of ${\\cal O}(10^{-4})$ can be found for ${\\rm BR}(h \\rightarrow \\bar b s + b \\bar s)$. In the MFV CMSSM such results can only be obtained in very restricted parts of the parameter space. The results show that it is not excluded to observe the decay $h \\rightarrow \\bar b s + b \\bar s$ in the MSSM at future $e^+e^-$ colliders.

  13. Experimental Study on the Three-Dimensional Unsteady Flow Characteristics of the Counter-Rotating Axial Flow Fan

    Science.gov (United States)

    Cho, Lee-Sang; Cha, Bong-Jun; Cho, Jin-Soo

    The counter-rotating axial flow fan shows that the complex flow characteristics with three-dimensional, viscous, and unsteady flow fields. For the understanding of the entire core flow in counter-rotating axial flow fan, it is necessary to investigate the three-dimensional unsteady flow field between the rotors. This information is also essential for the improvement of the aerodynamic characteristics, the reduction of the aerodynamic noise level and vibration characteristics of the counter-rotating axial flow fan. The purpose of this study is, therefore, to present the periodic characteristics of the blade passage flow, the wake and the tip vortex, which are utilized for the blade design data for the improvement of the aerodynamic characteristics, the reduction of the aerodynamic noise level and vibration characteristics of the counter-rotating axial flow fan. In this paper, the three-dimensional unsteady flow by the rotor-rotor interaction of the CRF were investigated at the design point(peak efficiency operating point). Unsteady flow fields in the CRF are measured at the cross-sectional planes of the upstream, between and downstream of each rotor using the 45° inclined hot-wire probe. The stationary hot-wire technique used the 45° inclined hot-wire probe, which rotates successively with 120 degrees increments about its own axis. And, the sampling data of unsteady flow fields were phase-locked averaged to remove the random components.

  14. On the possibility to detect the Higgs decay H→bb{sup -bar} in the associated Z+bb{sup -bar} production at the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Lipatov, A. V., E-mail: lipatov@theory.sinp.msu.ru [Skobeltsyn Institute of Nuclear Physics, Lomonosov Moscow State University, 119991, Moscow (Russian Federation); Joint Institute for Nuclear Research, 141980, Dubna, Moscow Region (Russian Federation); Zotov, N. P. [Skobeltsyn Institute of Nuclear Physics, Lomonosov Moscow State University, 119991, Moscow (Russian Federation)

    2015-05-05

    We investigate the possibility to detect the scalar Higgs boson decay H→bb{sup -bar} in the associated Z and bb{sup -bar} production at the LHC using the k{sub T}-factorization QCD approach. Our consideration is based on the off-shell (i.e. depending on the transverse momenta of initial quarks and gluons) production amplitudes of q{sup ∗}q{sup -bar∗}→ZH→Zq{sup ′}q{sup -bar′}, q{sup ∗}q{sup -bar∗}→Zq{sup ′}q{sup -bar′}, and g{sup ∗}g{sup ∗}→Zq{sup ′}q{sup -bar′} partonic subprocesses supplemented with the Catani–Ciafoloni–Fiorani–Marchesini (CCFM) dynamics of parton densities in a proton. We argue that the H→bb{sup -bar} signal could be observed at large transverse momenta near the Higgs boson peak despite the overwhelming QCD background, and we point out the important role of angular correlations between the produced Z boson and b-quarks.

  15. The GlueX Start Counter and Beam Asymmetry$\\Sigma$ in Single $\\pi^{0}$ Photoproduction

    Energy Technology Data Exchange (ETDEWEB)

    Pooser, Eric [Florida Intl Univ., Miami, FL (United States)

    2016-03-26

    The GlueX experiment aims to study meson photoproduction while utilizing the coherent bremsstrahlung technique to produce a 9 GeV linearly polarized photon beam incident on a liquid H2 target. A Start Counter detector was fabricated to properly identify the accelerator electron beam buckets and to provide accurate timing information. The Start Counter detector was designed to operate at photon intensities of up to 108 γ/s in the coherent peak and provides a timing resolution ~300 ps so as to provide successful identification of the electron beam buckets to within 99% accuracy. Furthermore, the Start Counter detector provides excellent solid angle coverage, ~ 90% of 4π hermeticity, and a high degree of segmentation for background rejection. It consists of a cylindrical array of 30 scintillators with pointed ends that bend towards the beam at the downstream end. Magnetic field insensitive silicon photomultiplier detectors were selected as the readout system. An initial measurement of the beam asymmetry Sigma in the exclusive reaction γ$\\vec{p}$→ π0p, where π0 → γ has been carried out utilizing the GlueX spectrometer during the Spring 2015 commissioning run. The tagged photon energies ranged from 2.5≤ Eγ ≤ 3.0 GeV in the coherent peak. These measurements were then compared to the world data set and show remarkable agreement with only two hours of physics production running.

  16. Probe $\\Lambda - \\bar{\\Lambda}$ oscillation in $J/\\psi \\rightarrow \\Lambda\\,\\bar\\Lambda$ decay at BES-III

    OpenAIRE

    Kang, X. W.; H.B. Li; Lu, G. R.

    2010-01-01

    We discuss the possible searching for the oscillation by coherent $\\Lambda\\bar{\\Lambda}$ production in $J/\\psi \\rightarrow \\Lambda \\bar{\\Lambda}$ decay process. The sensitivity of measurement of $\\Lambda - \\bar{\\Lambda}$ oscillation in the external field at BES-III experiment is considered. These considerations indicate an alternative way to probe the $\\Delta B =2$ amplitude in addition to neutron oscillation experiments. Both coherent and time-dependent information can be used to extract $\\L...

  17. Sobolev regularity of the $\\bar{\\partial}$-equation on the Hartogs triangle

    CERN Document Server

    Chakrabarti, Debraj

    2011-01-01

    The regularity of the $\\bar{\\partial}$-problem on the domain $\\{|{z_1}|<|{z_2}|<1\\}$ in $\\mathbb{C}^2$ is studied using $L^2$ methods. Estimates are obtained for the canonical solution in weighted $L^2$-Sobolev spaces with a weight that is singular at the point $(0,0)$. The canonical solution for $\\dbar$ with weights is exact regular in the weighted Sobolev spaces away from the singularity $(0,0)$. In particular, the singularity of the Bergman projection for the Hartogs triangle is contained at the singular point and it does not propagate.

  18. Restoring Alternate Bar Sequences in Large Rivers: Flow, Sediment, and Elbow Room

    Science.gov (United States)

    Trush, W. J.; McBain, S. M.

    2006-12-01

    Large river management must rely on crucial premises that the river channel is a product of its watershed's hydrology and the space within which it moves, and that native plant and animal species have evolved with, and still depend on, the natural annual hydrograph. While interesting academically, these premises may appear to offer very limited utility as management tools, given few large rivers in the Pacific Northwest and elsewhere have escaped major hydrologic and geomorphic change. The opposite, however, is likely true. Without reconstructing and incorporating an historical perspective, large river restoration will fail. Healthy river ecosystems can be achieved without completely restoring the natural unregulated hydrology, sediment supply regime, and original migration corridor. Usually there is little choice. An historical perspective identifies crucial threshold streamflow, sediment, and corridor processes driving a healthy river ecosystem. Alternating point bar sequences are the building blocks of alluvial rivers that also function as the physical template for creating abundant, high quality habitat for fish, amphibians, and riparian plant. While alternating bars can be created with bulldozers, their evolution, longevity, and quality will endure only if key geomorphic and biological threshold processes are provided by naturally variable annual hydrographs. An historical perspective therefore must identify how unregulated annual hydrographs once created and fostered dynamic alternating bar sequences. Restoration practitioners must then devise ways to restore these processes while purposefully cheating Mother Nature of some of her flow, sediment, and corridor width (elbow room). Two commonly prescribed high flow releases, flushing flows and the bankfull discharge, address several geomorphic requirements yet neither, or the two combined, can restore and maintain alternating bar sequences. Higher flood peak magnitudes from winter floods and spring snowmelt

  19. INFLUENCING OF FRICTION IN HINGES FORCE SIZE OF BARS

    Directory of Open Access Journals (Sweden)

    BOHOMAZ V. N.

    2016-04-01

    Full Text Available Formulation of the problem. The size of critical force of bar on the traditional method of calculation is determined in supposition of ideal hinge in the place of fixing of bar. There are both a hinge resistance at the turn of bar ends and their moving in the real hinges. Thus, there is the necessity of influencing character determination of these hinge imperfections on the size of critical force. In the existent scientific labours is devoted the alike problems, influencing of friction in the hinges of bar fastening on the size of critical force was not taken into account. At determination of bars stability with no ideality of hinges friction in them it is possible to take into account by the eccentric appendix of loading or appendix of moment. However at such approach it is difficult enough to define the size of attached force or moment. Purpose. To set influencing of friction in the hinge of bar fastening on of his critical force size in sense of Euler, and also build dependences for determination of bar critical force taking into account mechanical descriptions of hinges materials. Conclusion. For the task of determination the size of bar critical force with the joint fastening on ends are got the dependences which take into account mechanical descriptions of material hinge. The received dependences allow to define more exact meaning of critical force for bars. The examples of calculation of whole bar and bar with undercuting in the middle are resulted that values of critical force, certain on a traditional method are overpriced.

  20. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

  1. /bar p/p collider physics

    Energy Technology Data Exchange (ETDEWEB)

    Green, D.

    1989-03-01

    This note encompasses a set of six lectures given at the summer school held at Campos Do Jordao in January of 1989 near Sao Paulo, Brazil. The intent of the lectures was to describe the physics of /bar p/p at CERN and Fermilab. Particular attention has been paid to making a self contained presentation to a prospective audience of graduate students. Since large Monte Carlo codes might not be available to all members of this audience, great reliance was placed on ''back of the envelope estimates.'' Emphasis was also placed on experimental data rather than theoretical speculation, since predictions for, for example, supersymmetric particle production are easily obtained by transcription of formulae already obtained. 9 refs., 67 figs., 2 tabs.

  2. Human Rights and Dignity Behind Bars.

    Science.gov (United States)

    Maschi, Tina; Richter, Marina

    2017-01-01

    Death and dying in prisons constitute a topic of growing importance across the globe. Based on the contributions made in this special issue, we reflect on current debates and outline recommendations for dialogue and practice. Scientific dialogue across the Atlantic, and across the globe, provides insights into different national carceral systems and their ways of dealing with end of life behind bars. At the same time, the comparison also helps to identify basic needs and practices that can work in various settings. We identify several issues where further efforts need to be taken to deepen the dialogue. A common ground for all advancement of legislation and practice constitute the minimal level of rights to which every human being is entitled.

  3. Bars and spheroids in gravimetry problem

    CERN Document Server

    Sizikov, Valery

    2016-01-01

    The direct gravimetry problem is solved by dividing each deposit body into a set of vertical adjoining bars, whereas in the inverse problem, each deposit body is modelled by a homogeneous ellipsoid of revolution (spheroid). Well-known formulae for the z-component of gravitational intensity for a spheroid are transformed to a convenient form. Parameters of a spheroid are determined by minimizing the Tikhonov smoothing functional with constraints on the parameters, which makes the ill-posed inverse problem by unique and stable. The Bulakh algorithm for initial estimating the depth and mass of a deposit is modified. The proposed technique is illustrated by numerical model examples of deposits in the form of two and five bodies. The inverse gravimetry problem is interpreted as a gravitational tomography problem or, in other words, as "introscopy" of Earth's crust and mantle.

  4. Method and an apparatus to control the lateral motion of a long metal bar being formed by a mechanical process such as rolling or drawing

    Science.gov (United States)

    Chang, Tzyy-Shuh; Huang, Hsun-Hau; Lin, Chang-Hung

    2007-10-02

    An adjustable guide, includes two or more mechanisms each having a rotatable retaining element containing a retaining groove with a variable radius in its perimeter surface. The grooves form a guidance path to control the lateral, i.e. non-axial, motion of a long bar moving along a longitudinal axis during a production process.The diameter of the guidance path varies according to the variable radii of the grooves. The guidance path increases in size at a predetermined rate, from a point of origin to an end point on the retaining groove. Rotating the retaining elements causes the diameter of the retaining grooves to change so that the size of the guidance path can be changed to match the diameter of the bar being rolled, size of the guidance path can be changed to fit the diameter of a new bar rolled without having to exchange the guide for a different sized guide, reduce fiction between the bar and the guide, a media, such as compressed air, can be injected between the retaining elements via orifices.Each retaining element is attached to a mounting apparatus. The mounting apparatus can be fixed or flexible. The flexible mounting apparatus includes one or more springs and one or more shock absorbers. A force neutral position of the flexible mounting apparatus is designed to be located on the predetermined ideal bar path line. The flexible mounting apparatus dissipates kinetic energy from the bar thereby reducing the bar's lateral motion relative to the ideal bar path line.The damping ratio of the mounting apparatus can be adjustable to alter the product's vibration mode to enable better control of the bar's lateral motion.

  5. Current Over-the-Counter Medicine Label: Take a Look

    Science.gov (United States)

    ... This is to help protect consumers against possible criminal tampering. Drug products with tamper-evident packaging have ... Medicines Medicines in My Home (MIMH) Choosing the right over-the-counter medicine (OTCs) The Over-the- ...

  6. Calibration and Monte Carlo modelling of neutron long counters

    CERN Document Server

    Tagziria, H

    2000-01-01

    The Monte Carlo technique has become a very powerful tool in radiation transport as full advantage is taken of enhanced cross-section data, more powerful computers and statistical techniques, together with better characterisation of neutron and photon source spectra. At the National Physical Laboratory, calculations using the Monte Carlo radiation transport code MCNP-4B have been combined with accurate measurements to characterise two long counters routinely used to standardise monoenergetic neutron fields. New and more accurate response function curves have been produced for both long counters. A novel approach using Monte Carlo methods has been developed, validated and used to model the response function of the counters and determine more accurately their effective centres, which have always been difficult to establish experimentally. Calculations and measurements agree well, especially for the De Pangher long counter for which details of the design and constructional material are well known. The sensitivit...

  7. leaves extracts as counter stain in gram staining reaction 56

    African Journals Online (AJOL)

    DR. AMINU

    Keywords: Aqueous Extract, Dyes, Henna, Counter-Staining. INTRODUCTION ... is a stain with color contrasting to the principal stain, making the .... different solutions of ethanol extracts were prepared .... this plant a true natural dye. Saponins ...

  8. Sinus Pain: Can Over-the-Counter Medications Help?

    Science.gov (United States)

    ... requests or policy questions to our media and public relations staff at newsroom@entnet.org . Why Do We ... over-the-counter (OTC) medications. What Is The Role Of OTC Medication For Sinus Pain? There are ...

  9. Over the Counter Laxatives for Constipation: Use with Caution

    Science.gov (United States)

    ... may be best for you. Type of laxative (brand examples) How they work Side effects Oral osmotics ( ... the-counter laxatives. Journal of the American Medical Association. 2014;312:1167. Constipation. National Institute of Diabetes ...

  10. Over-the-counter codeine use in Iceland

    DEFF Research Database (Denmark)

    Almarsdóttir, Anna Birna; Grimsson, A

    2000-01-01

    The objective of this study was to test the assumption that liberalizing community pharmacy ownership in Iceland would lead to increased irrational use of over-the-counter pain relievers containing codeine....

  11. Study Counters Link Between Excess Pregnancy Weight and Overweight Kids

    Science.gov (United States)

    ... Study Counters Link Between Excess Pregnancy Weight and Overweight Kids Connection is likely in the genes, researchers ... 24, 2017 (HealthDay News) -- Kids whose moms were overweight during pregnancy have increased odds of being overweight ...

  12. Optimal synthesis of a four-bar linkage by method of controlled deviation

    Directory of Open Access Journals (Sweden)

    Bulatović Radovan R.

    2004-01-01

    Full Text Available This paper considers optimal synthesis of a four-bar linkage by method of controlled deviations. The advantage of this approximate method is that it allows control of motion of the coupler in the four-bar linkage so that the path of the coupler is in the prescribed environment around the given path on the segment observed. The Hooke-Jeeves’s optimization algorithm has been used in the optimization process. Calculation expressions are not used as the method of direct searching, i.e. individual comparison of the calculated value of the objective function is made in each iteration and the moving is done in the direction of decreasing the value of the objective function. This algorithm does not depend on the initial selection of the projected variables. All this is illustrated on an example of synthesis of a four-bar linkage whose coupler point traces a straight line, i.e. passes through sixteen prescribed points lying on one straight line. .

  13. The effect of moderate glycemic energy bar consumption on blood glucose and mood in dancers.

    Science.gov (United States)

    Brown, Derrick; Wyon, Matthew

    2014-03-01

    Ingesting quality carbohydrates has been shown to be essential for dancers. Given that most dance classes take place in the morning, it has been recommended that dancers eat a well-balanced breakfast containing carbohydrates, fats, and protein as a means of fuelling this activity. The aim of this study was to determine the effect of a moderate glycemic index energy (MGI) bar or a fasting condition on dancers' blood glucose levels and perceived pleasure-displeasure response during the first dance class of the day. In a randomized counterbalanced design, 10 female preprofessional dance students took their regular scheduled contemporary dance class, on four separate occasions. On each occasion, they consumed either a commercially prepared carbohydrate (CHO)-dense energy bar (47.3 g CHO) or water (FAST). Plasma glucose responses and pleasure-displeasure affect were measured before and at two time points during the class. Dancers who consumed the MGI bar had significantly greater peak blood glucose levels at all time points than those who fasted (pdance class. Further, we conclude that skipping breakfast can have an unfavorable effect on the pleasure-displeasure state of dancers. These findings highlight the impact of breakfast on how one feels, as well as the physiological and metabolic benefits of CHO as an exogenous energy source in dancers.

  14. Optimal Path Design of Geared 5-bar mechanism using Differential Evolution Algorithm

    Directory of Open Access Journals (Sweden)

    Ali Aliniay Saghalaksari

    2016-06-01

    Full Text Available Five-bar linkage mechanisms with two degrees of freedom (DOF are more capable in generating coupler path than four-bar mechanisms with one DOF. The DOF of these mechanisms is reduced to one and they will have constant ratio of binary input when they are equipped by gear. Therefore, besides keeping the simple structure, it is possible to employ them to generate a more accurate path than that generated by four-bar mechanisms using only one input. In this study, using such mechanism for the considered paths, which are used for the comparison purpose, a singleobjective design is performed to optimize the length of mechanism links and revolution ratio of gears by considering the necessary constraints. The error function of square deviation of positions is considered as the objective function and the differential evolution algorithm is utilized in order to solve the considered optimization problems, which are Triangle Curve with 22 Discrete Points and Asteroid Curve with 41 Discrete Points. Compared with the main reference [9], the final results revealed a significant improvement.

  15. Evaluation of dual flow counter-current chromatography and intermittent counter-current extraction.

    Science.gov (United States)

    Ignatova, Svetlana; Hewitson, Peter; Mathews, Ben; Sutherland, Ian

    2011-09-09

    The aim of this research is to compare two continuous extraction technologies, intermittent counter-current extraction (ICcE) and dual flow counter-current chromatography (DFCCC), in terms of loading and throughput using the GUESSmix, and show the advantages and disadvantages of the two methods. A model sample containing caffeine, vanillin, naringenin and carvone, with a total load of 11.2 g, was employed with a hexane-ethyl acetate-methanol-water (2:3:2:3) phase system to evaluate an ICcE method on a preparative (912 ml coil volume) DE-Midi instrument. While DFCCC was carried out on a specially designed preparative (561 ml coil volume) bobbin installed in a similar Midi instrument case. While similar throughputs of 7.8 g/h and 6.9 g/h were achieved for the ICcE and DFCCC methods respectively, ICcE was demonstrated to have a number of advantages over DFCCC.

  16. Over-the-counter codeine use in Iceland

    DEFF Research Database (Denmark)

    Almarsdóttir, Anna Birna; Grimsson, A

    2000-01-01

    The objective of this study was to test the assumption that liberalizing community pharmacy ownership in Iceland would lead to increased irrational use of over-the-counter pain relievers containing codeine.......The objective of this study was to test the assumption that liberalizing community pharmacy ownership in Iceland would lead to increased irrational use of over-the-counter pain relievers containing codeine....

  17. Using DMA for copying performance counter data to memory

    Science.gov (United States)

    Gara, Alan; Salapura, Valentina; Wisniewski, Robert W

    2013-12-31

    A device for copying performance counter data includes hardware path that connects a direct memory access (DMA) unit to a plurality of hardware performance counters and a memory device. Software prepares an injection packet for the DMA unit to perform copying, while the software can perform other tasks. In one aspect, the software that prepares the injection packet runs on a processing core other than the core that gathers the hardware performance data.

  18. Over-the-counter treatments for acne and rosacea.

    Science.gov (United States)

    Rosamilia, Lorraine Larsen

    2016-06-01

    Acne and rosacea are common inflammatory processes historically classified in the same disease category, but evolving understanding of their disparate pathophysiology and exacerbating factors have generated an enormous armamentarium of therapeutic possibilities. Patients seek over-the-counter therapies first when managing cutaneous disease; therefore, this review defines ingredients considered to be effective over-the-counter acne and rosacea products, their mechanisms, and safe formulations, including botanical components, oral supplements, and other anecdotal options in this vast skin care domain.

  19. Liberty and Order: Reintegration as Counter-Insurgency in Colombia

    Science.gov (United States)

    2003-01-01

    experienced the same fits and starts as others in the region. There have been successes , including the reintegration of the M-19 (Movimiento del 19... REINTEGRATION AS COUNTER-INSURGENCY IN COLOMBIA Mr. GREGORY E. PHILLIPS, DOS COURSE 5601 and 5602 FUNDAMENTALS OF STRATEGIC LOGIC and THE NATURE OF...COVERED 00-00-2003 to 00-00-2003 4. TITLE AND SUBTITLE Liberty and Order: Reintegration as Counter-Insurgency in Colombia 5a. CONTRACT NUMBER 5b

  20. Counter-terrorism judicial review by a traditionally weak judiciary

    DEFF Research Database (Denmark)

    Rytter, Jens Elo

    2014-01-01

    The article analyses recent Danish case law on counter-terrorism measures to ascertain the extent to which a tradiitonally weak judiciary like the Danish one performs a real review. The conclusion is that the review is real, but measured.......The article analyses recent Danish case law on counter-terrorism measures to ascertain the extent to which a tradiitonally weak judiciary like the Danish one performs a real review. The conclusion is that the review is real, but measured....