Realidad aumentada en exteriores e interiores

OpenAIRE

Gazcón, Nicolás Fernando; Trippel Nagel, Juan Manuel; Urribarri, Dana K.; Bjerg, Ernesto; Castro, Silvia Mabel

2015-01-01

La tecnología conocida como Realidad Aumentada ya forma parte con mayor frecuencia de nuestra vida cotidiana. Los avances tecnológicos como son, por ejemplo, los dispositivos móviles, han permitido que esta tecnología emergente esté al alcance de cualquier tipo de público. Si bien constantemente surgen diversas propuestas para entretenimiento, medicina, educación, turismo y mantenimiento, entre otras, todavía hay un largo camino por recorrer para que esta tecnología madure en cada campo, o...

In Situ Fabrication of AlN Coating by Reactive Plasma Spraying of Al/AlN Powder

Directory of Open Access Journals (Sweden)

Mohammed Shahien

2011-10-01

Full Text Available Reactive plasma spraying is a promising technology for the in situ formation of aluminum nitride (AlN coatings. Recently, it became possible to fabricate cubic-AlN-(c-AlN based coatings through reactive plasma spraying of Al powder in an ambient atmosphere. However, it was difficult to fabricate a coating with high AlN content and suitable thickness due to the coalescence of the Al particles. In this study, the influence of using AlN additive (h-AlN to increase the AlN content of the coating and improve the reaction process was investigated. The simple mixing of Al and AlN powders was not suitable for fabricating AlN coatings through reactive plasma spraying. However, it was possible to prepare a homogenously mixed, agglomerated and dispersed Al/AlN mixture (which enabled in-flight interaction between the powder and the surrounding plasma by wet-mixing in a planetary mill. Increasing the AlN content in the mixture prevented coalescence and increased the nitride content gradually. Using 30 to 40 wt% AlN was sufficient to fabricate a thick (more than 200 µm AlN coating with high hardness (approximately 1000 Hv. The AlN additive prevented the coalescence of Al metal and enhanced post-deposition nitriding through N₂ plasma irradiation by allowing the nitriding species in the plasma to impinge on a larger Al surface area. Using AlN as a feedstock additive was found to be a suitable method for fabricating AlN coatings by reactive plasma spraying. Moreover, the fabricated coatings consist of hexagonal (h-AlN, c-AlN (rock-salt and zinc-blend phases and certain oxides: aluminum oxynitride (Al₅O₆N, cubic sphalerite Al₂₃O₂₇N₅ (ALON and Al₂O₃. The zinc-blend c-AlN and ALON phases were attributed to the transformation of the h-AlN feedstock during the reactive plasma spraying. Thus, the zinc-blend c-Al

Instability of TiC and TiAl3 compounds in Al-10Mg and Al-5Cu alloys by addition of Al-Ti-C master alloy

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

The performance of Al-Ti-C master alloy in refining Al-10Mg and A1-5Cu alloys was studied by using electron probe micro-analyzer (EPMA) and X-ray diffractometer (XRD) analysis.The results indicate that there are obvious fading phenomena in both Al-10Mg and Al-5Cu alloys with the addition of Al-5Ti-0.4C refiner which contains TiC and TiAl3 compounds.Mg element has no influence on the stability of TiC and TiAl3, while TiC particles in Al-10Mg alloy react with Al to form Al4C3 particles, resulting in the refinement fading.However, TiC particles are relatively stable in Al-5Cu alloy, while TiAl3 phase reacts with Al2Cu to produce a new phase Ti(Al, Cu)2, which is responsible for the refinement fading in Al-5Cu alloy.These indicate that the refinement fading will not occur only when both the TiC particles and TiAl3 compound of Al-Ti-C refiner are stable in Al alloys.

PEMAHAMAN HADITS TARBAWI BURHAN AL ISLAM AL ZARNUJI DALAM KITAB TA’LIM AL MUTA’ALLIM

Directory of Open Access Journals (Sweden)

Benny Afwadzi

2017-01-01

Full Text Available This paper explores the understanding of tarbawi (education hadith from one of the major influential clerics in the Islamic educational system, especially in pesantren. He is Burhan al Islam al Zarnuji with his landmark book Ta’lim al Muta’allim. The conclusion that can be drawn is that al Zarnuji has shades of sufistical view in understanding tarbawi hadith. This can be seen in his understanding of hadith on obligation to seek knowledge (thalab al ilmi faridhatun ‘ala kulli muslimin wa muslimatin, which is interpreted as ilm al hal, the science concerning the condition of the human religious or simplistically said as the religious sciences; and the hadith of intention of studying (innama al a’malu bi al niyyat with the intention for the sake of the hereafter and religion, not mundane. Such an understanding is not something taken for granted, but it can be reinterpreted and perfected in accordance with the spirit of the times of context.

Calculation of Gibbs energy of Zr-Al-Ni, Zr-Al-Cu, Al-Ni-Cu and Zr-Al-Ni-Cu liquid alloys based on quasiregular solution model

International Nuclear Information System (INIS)

Li, H.Q.; Yang, Y.S.; Tong, W.H.; Wang, Z.Y.

2007-01-01

With the effects of electronic structure and atomic size being introduced, the mixing enthalpy as well as the Gibbs energy of the ternary Zr-Al-Cu, Ni-Al-Cu, Zr-Ni-Al and quaternary Zr-Al-Ni-Cu systems are calculated based on quasiregular solution model. The computed results agree well with the experimental data. The sequence of Gibbs energies of different systems is: G Zr-Al-Ni-Cu Zr-Al-Ni Zr-Al-Cu Cu-Al-Ni . To Zr-Al-Cu, Ni-Al-Cu and Zr-Ni-Al, the lowest Gibbs energy locates in the composition range of X Zr 0.39-0.61, X Al = 0.38-0.61; X Ni = 0.39-0.61, X Al = 0.38-0.60 and X Zr = 0.32-0.67, X Al = 0.32-0.66, respectively. And to the Zr-Ni-Al-Cu system with 66.67% Zr, the lowest Gibbs energy is obtained in the region of X Al = 0.63-0.80, X Ni = 0.14-0.24

Bipolar characteristics of AlGaN/AlN/GaN/AlGaN double heterojunction structure with AlGaN as buffer layer

International Nuclear Information System (INIS)

Peng, Enchao; Wang, Xiaoliang; Xiao, Hongling; Wang, Cuimei; Yin, Haibo; Chen, Hong; Feng, Chun; Jiang, Lijuan; Hou, Xun; Wang, Zhanguo

2013-01-01

Highlights: •2DEG and 2DHG coexist in the AlGaN/AlN/GaN/AlGaN DH-structure. •The sheet densities of 2DEG and 2DHG vary with buffer Al content and GaN thickness. •The conditions for the disappearance of 2DHG are discussed. •Increasing buffer Al content provides better electron confinement. •Dislocation scattering is reduced in the DH-structure. -- Abstract: This is a theoretical study of AlGaN/AlN/GaN/AlGaN double heterojunction (DH) structure with AlGaN as buffer layer. Our calculation shows that as the buffer Al content increases, though two-dimensional electron gas (2DEG) sheet density decreases, the channel back-barrier caused by polarization-induced electric field in GaN provides better electron confinement. And under certain conditions the DH-structure shows bipolar characteristics, with an additional two-dimensional hole gas (2DHG) formed at GaN/AlGaN interface. The influence of the buffer Al content and GaN channel thickness on the 2DEG and 2DHG sheet densities are investigated, and the conditions for the disappearance of 2DHG are discussed. Also, the mobility inhibited by dislocation scattering is enhanced in DH-structure due to the enhancement of screening effect of the 2DEG

DEL MALTRATO AL UXORICIDIO. LA VIOLENCIA «PUERTAS ADENTRO» EN LA ALDEA CHILENA TRADICIONAL (Siglo XIX

Directory of Open Access Journals (Sweden)

René Salinas Meza

2011-10-01

Full Text Available Este artículo pone de manifiesto el contexto en el cual las mujeres chilenas de las aldeas del siglo XIX son víctimas de diversos tipos de agresiones físicas, directas e indirectas, y psicológicas. Las conductas violentas de los agresores son explicadas en el marco de una comunidad que las reconoce como un componente habitual de la vida cotidiana. Así, se delimitan espacios específicos en los que se desenvuelven las relaciones de la gente, tales como el mundo urbano de la aldea y el mundo doméstico de la casa. En ambos, las personas construyen redes colectivas de solidaridad y fraternidad; pero, al mismo tiempo, desarrollan relaciones de competencia que son generadoras de roces y agresiones que ilustran la sociabilidad y el parentesco. Por otra parte, las mujeres agredidas confundieron a menudo la agresión con la aceptación de la autoridad masculina que permitía suponer la existencia de un matrimonio socialmente aceptado y cotidianamente bien llevado. La actitud de rebeldía femenina chocaba con el rechazo social y el ejercicio de un poder marital que se expresaba en conductas agresivas. Así, las relaciones en la pareja no fueron entre iguales, sino jerárquicas, imponiendo a las mujeres un rol subordinado y dependiente frente a los hombres, los que, a su vez, ostentaban la autoridad suficiente para controlarlas y castigarlas. Con la ayuda documental de un abundante número de expedientes judiciales se intenta comprender y explicar las conductas que asumen hombres y mujeres en la relación familiar desarrollada en las aldeas chilenas del siglo XIX.

The code of light: al-ghazali and al-suhrawardi

OpenAIRE

Gediminaitė, Barbora

2017-01-01

The Code of Light: Al-Ghazali and Al-Suhrawardi The Bachelor’s thesis The Code of Light in Islam: al-Ghazali and al-Suhrawardi presents a comparative study of light. The study analyses the philosophical systems of al-Ghazali and al-Suhrawardi through the reconstruction of the image of light and its operation principles. The main subject of the thesis are the attributes of light. The main problem of the research is the semantics and contextuality of light in Islamic theology and philosophy. Th...

Pemikiran Filosofis Sadra Dalam Tafsir Al-Qur’an Al-Karim : Surah Al-’A‘la

Directory of Open Access Journals (Sweden)

Kerwanto Kerwanto

2014-12-01

Full Text Available Abstrak : Dalam tafsir atas Surah al-’A‘lā, Mulla Sadra, melalui karyanya Tafsīr al Qur’ān al-Karīm, mengajak jiwa kita berpetualang menuju lapisan makna terdalam untuk mengenali realitas ketauhidan (al- mabdā’, kenabian (shirāth atau nubuwwah dan kebangkitan (ma‘ād dan mengulasnya secara filosofis. Penelitian ini merupakan suatu upaya untuk menggali manfaat dari aspek-aspek penting dari sumber-sumber keagamaan yang tergali dari petunjuk al Qur’an yang berpadu dengan prinsip- prinsip rasional filosofis dan pengalaman mistik (intuitif Sadra. Setiap bab pada tafsir ini diberikan judul dengan tasbīḥ (pernyataan pemujian dan pensucian, dengan tetap memaparkan beragam pokok persoalan terkait metafisika al-Qur’an. Prinsip-prinsip filosofis yang digunakan dalam risalah tafsir ini bisa menjadi salah satu bukti ketidakberjarakan antara filsafat dengan teks-teks keagamaan. Sadra menggunakan metode tafsir yang tetap menerima sisi lahiriah al-Qur’an, dan selanjutnya mencari misteri-misteri, rahasia-rahasia, dan dengan bantuan intelek (akal, intuisi dan iluminasi Tuhan untuk memperoleh realitas-realitas dan makna- makna dibalik selaput ekternalnya (aspek literalnyaKata kunci : Ḥikmah Muta’āliyah, irfan, al-mabdā’, kebangkitan setelah mati, nubuwwah, takwīl, gerak substansial (ḥarakah jawhariyyah, denotasi utama (al-maqshūd al-ashlī, penyempurnaan diri (takammul, tasbīḥ.  Abstract : In his commentary on Surah al-’ A‘lā, Mulla Sadra, through his Tafsīr al-Qur’ān al-Karīm invites our souls to ventureinto the deepest layers of meaning to recognize the reality of Divinity (al- mabdā’, prophethood (Ṣirāṭ or nubuwwah and resurrection (ma‘ād and discusses it in a more philosophical manner. This study is an attempt to explore the benefits of these important aspects of religious sources unearthed from Qur’anic injunctions combined with rational principles of philosophical and mystical experiences

La educación puesta a prueba en un espacio de reclusión

Directory of Open Access Journals (Sweden)

Gilles Chantraine

2013-04-01

Full Text Available Recién llegados al paisaje carcelario francés, los establecimientos penitenciarios para menores (EPM son fruto de la voluntad de convertir los espacios de reclusión destinados a jóvenes de entre 13 y 18 años en espacios propiamente “educativos”, al objeto de dar respuesta a la falta de continuidad socioeducativa de los menores presos de los quartiers mineurs ubicados en las prisiones de adultos. Basada en una investigación monográfica realizada en dos EPM que mezcla observaciones directas de la vida cotidiana de la reclusión con entrevistas semiestructuradas hechas al conjunto de actores del EPM.Esta contribución está basada en una investigación monográfica hecha en dos EPM, que mezcla observaciones directas de la vida cotidiana de la reclusión con entrevistas semidirectivas realizadas al conjunto de actores del EPM; su objetivo es analizar la forma adoptada por las prácticas educativas en estos establecimientos y su entrelazamiento con el orden penitenciario. Una vez recordados algunos elementos de contexto relativos a las recientes transformaciones de la justicia de menores en Francia, propondremos una mirada simétrica de las prácticas de los educadores de la PJJ (Protección Judicial de la Juventud y de los vigilantes penitenciarios.Este análisis simétrico nos llevará a demostrar que, aun poniendo de manifiesto una apertura relativa de la institución carcelaria, el EPM sigue marcado por una supremacía de las lógicas securitarias sobre las lógicas educativas, que dibuja una articulación original entre ambas lógicas: en el EPM ya no se trata únicamente de constreñir los cuerpos de los presos a someterse al orden penitenciario, sino también de una labor de movilización de las subjetividades reclusas mediante un trabajo “educativo” de persuasión sobre la pertinencia del orden penitenciario.

A united refinement technology for commercial pure Al by Al-10Ti and Al-Ti-C master alloys

International Nuclear Information System (INIS)

Ma Xiaoguang; Liu Xiangfa; Ding Haimin

2009-01-01

Because flake-like TiAl 3 particles in Al-Ti-C master alloys prepared in a melt reaction method dissolve slowly when they are added into Al melt at 720 deg. C, Ti atoms cannot be released rapidly to play the assistant role of grain refinement, leading to a poor refinement efficiency of Al-Ti-C master alloys. A united refinement technology by Al-10Ti and Al-Ti-C master alloys was put forward in this paper. The rational combination of fine blocky TiAl 3 particles in Al-10Ti and TiC particles in Al-Ti-C can improve the nucleation rate of α-Al. It not only improves the grain refinement efficiency of Al-Ti-C master alloys, but also reduces the consumption

Liquidus projection of the Nb-Cr-Al system near the Al3(Nb,Cr) + Cr(Al,Nb) eutectic region

International Nuclear Information System (INIS)

Souza, S.A.; Ferrandini, P.L.; Nunes, C.A.; Coelho, A.A.; Caram, R.

2006-01-01

The system Nb-Cr-Al was investigated in the region near the Al 3 (Nb,Cr) + Cr(Al,Nb) eutectic and the liquidus projection of that region was determined based on the microstructural characterization of arc melted alloys. The characterization utilized scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), differential thermal analysis (DTA) and X-ray diffraction (XRD). The results allowed one to determine three primary solidification liquidus surfaces ((Cr,Al) 2 Nb, Cr(Al,Nb) and Al 3 (Nb,Cr)), that are originated from the binary systems Cr-Nb, Cr-Al and Al-Nb. It is proposed the occurrence of the invariant reaction L + (Cr,Al) 2 Nb ↔ Al 3 (Nb,Cr) + Cr(Al,Nb) and of a point of minimum, which involves a three phase reaction, L ↔ Al 3 (Nb,Cr) + Cr(Al,Nb). All alloys studied showed formation of the Al 3 (Nb,Cr) + Cr(Al,Nb) eutectic as the last solidification step with Al(Nb)Cr 2 precipitating from Cr(Al,Nb)

A united refinement technology for commercial pure Al by Al-10Ti and Al-Ti-C master alloys

Energy Technology Data Exchange (ETDEWEB)

Ma Xiaoguang [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn; Ding Haimin [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China)

2009-03-05

Because flake-like TiAl{sub 3} particles in Al-Ti-C master alloys prepared in a melt reaction method dissolve slowly when they are added into Al melt at 720 deg. C, Ti atoms cannot be released rapidly to play the assistant role of grain refinement, leading to a poor refinement efficiency of Al-Ti-C master alloys. A united refinement technology by Al-10Ti and Al-Ti-C master alloys was put forward in this paper. The rational combination of fine blocky TiAl{sub 3} particles in Al-10Ti and TiC particles in Al-Ti-C can improve the nucleation rate of {alpha}-Al. It not only improves the grain refinement efficiency of Al-Ti-C master alloys, but also reduces the consumption.

Una fuente para el estudio de la geografía eclesiástica de Galicia en la Baja Edad Media: las tasaciones del subsidio y la décima

Directory of Open Access Journals (Sweden)

Vázquez Bertomeu, Mercedes

2002-12-01

Full Text Available The most important tax that Galician clergy must confront in late Middle Ages is the decimal, delivered initially to the Pontificate and afterwards to the royal chambre, which became the revenue called in the century XV «decima y subsidio del clero». The payment that the diocesan representative does to the papal or royal collector is the final point of a process whose details are described here for the case of the Galician churches. This charge, which envolves all the diocesan benefices, caused a specific documentary type known as taxation in which is established a roll of contributors and a valuation of beneficies - a very useful source to know late medieval dioceses.

La tasa más importante que pesa sobre el clero gallego es la décima, entregada inicialmente en beneficio del pontificado y más tarde al tesoro real, dando lugar al canon que en el siglo XV se conoce como «décima y subsidio del clero». El pago que el representante diocesano hace al recaudador pontificio o real es el punto final de un proceso cuyos pormenores son aquí descritos para el caso de las diócesis gallegas. Este gravamen, que afecta a todo los beneficios diocesanos, dio lugar al nacimiento de un tipo documental específico conocido como tasación en el que se establece la cantidad que cada contribuyente debe aportar y que es de gran interés para el acercamiento a la geografía diocesana bajomedieval.

United modification of Al-24Si alloy by Al-P and Al-Ti-C master alloys

Institute of Scientific and Technical Information of China (English)

韩延峰; 刘相法; 王海梅; 王振卿; 边秀房; 张均艳

2003-01-01

The modification effect of a new type of Al-P master alloy on Al-24Si alloys was investigated. It is foundthat excellent modification effect can be obtained by the addition of this new type of A1-P master alloy into Al-24Simelt and the average primary Si grain size is decreased below 47 μm from original 225 μm. It is also found that theTiC particles in the melt coming from Al8Ti2C can improve the modification effect of the Al-P master alloy. Whenthe content of TiC particles in the Al-24Si melt is 0.03 %, the improvement reaches the maximum and keeps steadywith increasing content of TiC particles. Modification effect occurs at 50 min after the addition of the Al-P master al-loy and TiC particles, and keeps stable with prolonging holding time.

Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling

Science.gov (United States)

Yu, Hailiang; Lu, Cheng; Tieu, A. Kiet; Li, Huijun; Godbole, Ajit; Kong, Charlie

2018-06-01

The roll bonding technique is one of the most widely used methods to produce metal laminate sheets. Such sheets offer interesting research opportunities for both scientists and engineers. In this paper, we report on an experimental investigation of the 'thickness effect' during laminate rolling for the first time. Using a four-high multifunction rolling mill, Cu/Al/Cu laminate sheets were fabricated with a range of thicknesses (16, 40, 70 and 130 μm) of the Al layer. The thickness of the Cu sheets was a constant 300 μm. After rolling, TEM images show good bonding quality between the Cu and Al layers. However, there are many nanoscale pores in the Al layer. The fraction of nanoscale pores in the Al layer increases with a reduction in the Al layer thickness. The finite element method was used to simulate the Cu/Al/Cu rolling process. The simulation results reveal the effect of the Al layer thickness on the deformation characteristics of the Cu/Al/Cu laminate. Finally, we propose that the size effect of the Al layer thickness during Cu/Al/Cu laminate rolling may offer a method to fabricate 'nanoporous' Al sandwich laminate foils. Such foils can be used in electromagnetic shielding of electrical devices and noisy shielding of building.

Del abandono y la orfandad al cuidado y formación para la vida

Directory of Open Access Journals (Sweden)

Luz Alexandra Garzón Ospina

2017-01-01

Full Text Available Este artículo analiza la historia institucional de la Escuela de Oficios Domésticos y el Asilo San José para niños desamparados, dos instituciones creadas por la Beneficencia de Cundinamarca para la atención y educación de la niñez en orfandad y abandono. Este análisis se realiza a partir de los informes de protección infantil dados a la Junta General de Beneficencia por parte del secretario de Asistencia Social y de los directores científicos y administrativos de estos establecimientos durante los años 1938, 1939, 1944 y 1946. El interés se centra en analizar, describir y contextualizar el funcionamiento y la vida cotidiana de estas instituciones.

Structural stability and electronic properties of AlCu3, AlCu2Zr in AlZr3: Stabilnost strukture in elektronske lastnosti AlCu3, AlCu2Zr in AlZr3:

OpenAIRE

Cheng, Rong; Wu, Xiao-Yu

2013-01-01

First-principles calculations were performed to study the alloying stability and electronic structure of the Al-based intermetallic compounds AlCusub3, AlCusub{2}Zr and AlZrsub3. The results show that the lattice parameters obtained after the full relaxation of the crystalline cells are consistent with the experimental data, and these intermetallics have a strong alloying ability and structural stability due to their negative formation energies and their cohesive energies. A further analysis ...

La hipotermia como alternativa terapéutica en el manejo del estatus epiléptico en caninos

OpenAIRE

Giraldo Villegas, Juan Carlos; Meneses Córdoba, Fernando; Gutiérrez Gómez, Claudia Marcela

2012-01-01

Las enfermedades que tienen como origen el sistema nervioso central, presentan un reto para el clínico especialista en pequeños animales. En este artículo se muestra la hipotermia (bajos  niveles de temperatura externos al paciente) como una alternativa en el manejo del estatus  epiléptico, el cual es un problema neurológico de alto impacto en la clínica cotidiana y se  manifiesta con la presencia de eventos epilépticos continuos, en los cuales el paciente no recupera su conciencia entre epis...

Nuevos materiales didácticos para descubrir los aspectos más cotidianos de la Electroquímica

OpenAIRE

Arán-Ais, Rosa M.; Busó-Rogero, Carlos; Chumillas, Sara; Climent, Víctor; Herrero, Enrique; Aldaz Riera, Antonio; Feliu, Juan M.

2014-01-01

A pesar del amplio abanico de aplicaciones que posee la electroquímica, con importantes repercusiones en muchos aspectos de la vida cotidiana, los egresados de química de las universidades españolas poseen en general un notable desconocimiento de esta materia. Con objeto de hacer más atractivo el aprendizaje de esta parte de la química, al tiempo que se revelan algunas de sus aplicaciones menos conocidas, se han preparado nuevos materiales didácticos. En ellos se describen de manera divulgati...

Complementos exóticos, atractivos en la formación matemática del Bachillerato de Ciencias y Tecnología de Castilla y León

OpenAIRE

Campo Gutiérrez, Luis del

2013-01-01

Acercamiento de las matemáticas al alumnado de Bachillerato de Ciencias y Tecnología para romper la barrera que existe entre ellos y la matemática como ente abstracto y ciencia de reglas fijas sin demasiada relación con otros saberes y situaciones cotidianas. Este acercamiento a los alumnos se pretende hacer a través de complementos poco comunes, peculiares que atraigan por lo sorprendente de su propuesta, muchos de ellos desconocidos para el público general y que pueden incrementar el interé...

Spa Rituales Ancestrales AüA S.A.S.

OpenAIRE

Lozano Socarrás, Rosa Marina

2013-01-01

Las practicas ancestrales de las culturas precolombinas cada día son mas validas en su aplicación actual para la medicina alternativa, orientada al bienestar y la salud, es un hecho que en los últimos años se observa un gran crecimiento de endemias de estrés que se presentan bajo determinadas circunstancias propias del sistema actual de vida urbana y actividades cotidianas, ocasionando recargas de tensión como respuesta a la supervivencia en un mundo agitado. La somatizacion del estrés se tra...

Seguridad en espacios confinados aplicados en El Complejo Metalúrgico de La Oroya

OpenAIRE

Álvarez Valencia, Enrique Camilo; Álvarez Valencia, Enrique Camilo

2010-01-01

El tema está referido al conocimiento y análisis profundo de los peligros y riesgos que están asociados a los espacios confinados cuyas principales características de: “falta de oxígeno, poca ventilación y presencia de gases tóxicos y atmósferas explosivas entre otras”, están presentes en las actividades cotidianas del hogar, la comunidad, y la industria en general. En este contexto, las actividades minero metalúrgicas tienen un alto inventario de trabajos con estas características, debido a ...

Análisis químico de alimentos cocinados, típicos de los estados de Puebla y Tlaxcala, México

OpenAIRE

Morales-Guerrero, Josefina C.; García-Zepeda, Rodrigo A.; Ruiz-Jimenez, Silvia; Rosas-Romero, M. Jesús; Salas-Velázquez, Víctor; Morales-Ravelo, Claudia

2015-01-01

La información nutrimental de los alimentos cocinados es útil para la planificación dietética de los individuos, la cual incluye calcular dietas más apegadas a la vida cotidiana, ofrecer orientación alimentaria adecuada, desarrollar nuevos productos, informar al consumidor y aspectos diversos de la regulación sanitaria de los alimentos. El objetivo de este estudio fue determinar la composición química (humedad, cenizas, proteína cruda, extracto etéreo, fibra cruda, hidratos de carbono, Na, K,...

Presentación Monográfico Educación Infantil

OpenAIRE

Fernández Martínez, Pilar; Ríos García, Isabel; Fernández Martínez, María del Pilar; Ramos Xavier, Gelta Terezinha

2016-01-01

En este Monográfico de la RIE hemos abordado aspectos teóricos y prácticos en distintos escenarios del quehacer educativo en la Educación Infantil que contribuyen al desarrollo social, afectivo, cognitivo y organizativo. En los trabajos que aparecen en él, de una alta calidad investigadora pero muy arraigados a las aulas y a las realidades cotidianas de la escuela infantil, encontramos un punto de unión bajo el enfoque sociocultural de los procesos de enseñanza y aprendizaje, que establece qu...

Criminología mediática y victimología del miedo- incidencia en la política criminal

OpenAIRE

Gaibor Iza, Paulo César

2016-01-01

La presente investigación analiza el miedo como construcción social y a partir de la categoría teoría del miedo líquido planteado por Zygmunt Bauman se describe como un sentimiento destinado para favorecer la supervivencia, pierde su significación original hasta convertirse en una sensación omnipresente en la vida cotidiana frente a la cual se ofrecen múltiples soluciones disponibles por catálogo sin que ninguna de ellas logre conferir a los seres humanos al anhelada seguridad que buscan en l...

Literatura infantil para no lectores. Una experiencia desde la universidad

OpenAIRE

Ponce Naranjo, Genoveva

2016-01-01

La lectura es un tema de indiscutible importancia, como lo refiere Michèle Petit (1999, p. 19), “la lectura es tanto un medio para elaborar su subjetividad como un medio para acceder al conocimiento”; por eso, la experiencia académica con estudiantes de la Carrera de Ciencias Sociales de la Facultad de Ciencias de la Educación de la Universidad Nacional de Chimborazo,  tuvo como objetivo, resignificar  la lectura como práctica cotidiana, a través de una metodología cualitativa que apoyada en ...

Nuevos tiempos para la comunicaci??n, "branded content" frente a otras tendencias = New times for communication, branded content against other trends

OpenAIRE

Carrizo Rey, Vanessa

2017-01-01

La manera de comunicarnos entre las personas ha cambiado radicalmente respecto al pasado siglo. Las nuevas tecnolog??as de la informaci??n y comunicaci??n han irrumpido en nuestras vidas de manera que si echamos la vista atr??s apenas 10 a??os, nos daremos cuenta que nada es lo mismo a la hora de comunicarnos con otras personas, con las empresas e incluso en nuestra vida cotidiana como por ejemplo a la hora de hacer la compra o ver la televisi??n, nada es igual. En este trabajo, se hablar?? d...

Cooperación y relevancia: dos aproximaciones pragmáticas a la interpretación

OpenAIRE

Yus Ramos, Francisco

2003-01-01

En las últimas décadas, los estudios del lenguaje humano y la interpretación han experimentado un importante giro desde posiciones tradicionales (que atribuían un excesivo valor al código lingüístico en detrimento de la práctica cotidiana del lenguaje) hacia el paradigma de la pragmática y la creciente importancia que esta perspectiva lingüística otorga a las diferentes variedades de información contextual en el desarrollo y la calidad de los intercambios conversacionales.

LAS MATEMÁTICAS Y EL ARTE: propuesta de intervención en Educación Infantil.

OpenAIRE

Bejarano-García, María

2015-01-01

Las matemáticas escolares, en muchas ocasiones, resultan alejadas de la realidad y sin aparente aplicabilidad en la vida cotidiana. Partiendo de la idea de que el aprendizaje de las matemáticas está cargado de connotaciones negativas, el trabajo que se presenta ha sido diseñado desde el convencimiento de que hay otra forma de aprender matemáticas mucho más activa, lúdica y natural, haciendo de ellas una herramienta funcional para el conocimiento del entorno que rodea al niño. Para ello, se ha...

Roles y estereotipos de género en el cine romántico de la última década. Perspectivas educativas

OpenAIRE

Morales Romo, Beatriz

2015-01-01

[ES]En la sociedad del conocimiento en la que hoy estamos inmersos, el cine tiene, por activa o por pasiva, un papel fundamental. Al tiempo, a pesar de los numerosos avances logrados en las últimas décadas en pro de la igualdad entre hombres y mujeres, la vida cotidiana sigue impregnada de roles y estereotipos sexistas que erosionan esta igualdad. Desde estos dos puntos de partida nace esta tesis. Su estructura gira en torno a tres capítulos teóricos, donde se abordan y analizan diversas c...

Sexoservidoras en salones de masajes en la ciudad de Hermosillo (Sonora, México)

OpenAIRE

Gay-Sylvestre, Dominique

2016-01-01

Bellas, « sexys », madres de familia solteras o casadas, las sexoservidoras (trabajadoras sexuales) llevan una vida oculta entre el hogar, el trabajo « fuera de la casa » y el salón de belleza donde practican masajes « especiales ». Necesidades apremiantes, carencias educativas, ausencia de carrera, lucha cotidiana por el bienestar de los hijos, las han inducido a optar por un oficio que, al contrario del de las de la calle, les ofrece seguridad y ganancia. Todas llevan sobrenombres: las masa...

Utilización de los sistemas de diálogo hablado para el acceso a la información en diferentes dominios

OpenAIRE

Griol, David; Zoraida, Callejas; López-Cózar, Ramón; Gutiérrez, Ana

2009-01-01

Ponencias de la Segunda Conferencia internacional sobre brecha digital e inclusión social, celebrada del 28 al 30 de octubre de 2009 en la Universidad Carlos III de Madrid La acción de conversar es el modo más natural para resolver un gran número de acciones cotidianas entre los seres humanos. Por este motivo, un interés histórico dentro del campo de las Tecnologías del Habla ha sido utilizar estas tecnologías en aplicaciones reales, especialmente en aplicaciones que permitan a una persona...

/Cu-Al System

Science.gov (United States)

Kish, Orel; Froumin, Natalya; Aizenshtein, Michael; Frage, Nachum

2014-05-01

Wettability and interfacial interaction of the Ta2O5/Cu-Al system were studied. Pure Cu does not wet the Ta2O5 substrate, and improved spreading is achieved when relatively a high fraction of the active element (~40 at.% Al) was added. The Al2O3 and AlTaO4 phases were observed at the Ta2O5/Cu-Al interface. A thermodynamic evaluation allowed us to suggest that the lack of wetting bellow 40 at.% Al is due to the presence of a native oxide, which covers the drop. The conditions of the native oxide decomposition and the formation of the volatile Al2O suboxide strongly depend on the vacuum level during sessile drop experiments and the composition of the Cu-Al alloy. In our case, Al contents greater than 40% provides thermodynamic conditions for the formation of Al2O (as a result of Al reaction with Al2O3) and the drop spreading. It was suggested that the final contact angle in the Ta2O5/Cu-Al system (50°) is determined by Ta adsorption on the newly formed alumina interlayer.

Un improbabile precursore di Gutenberg?

Directory of Open Access Journals (Sweden)

Antonio Sartori

2010-03-01

Full Text Available The reconsideration of the small silver foil epigraph of the so called “Tesoro di Marengo” clarly demonstrates that the inscription has been made not “per mezzo di punzoni e stampi”, as proposed by the first publisher and never more discussed, but using a deep-drawing technique applied to the upper side, which the succeeding phases of deepening, rethink, corrections to many imperfections can be followed of.

Metodologi Kitab Ma‘alim al-Tanzil Karya Al-Bagawiy

Directory of Open Access Journals (Sweden)

M. Rusydi Khalid

2017-12-01

This study aims to describe the metodology of Ma'a> lim al-tanzi>l book by al-Bagawi. The book is one of the books of exegesis written on the basis of hadith, which by the commentary scholars recognized avoided from heresy and weak hadith. The author of this book is Imam Abu Humaid Hussein bin Mas‘u>d al-Farra>’ Al-Bagawi al-Syafi‘i>, died in the year 510 H. This exegesis book combines the interpretation of the companions, tabi‘i>n, and tabi‘i> tabi‘i>n. Interpretation is broken down with easy, simple, and concise diction choices. The stoning of the interpretation of the salaf scholars without mentioning the sanad as already mentioned in the introduction to his book. This book was first printed in one edition with the exegesis book of Ibn Kas}i>r and al-kha>zin. This book interprets the Qur'an analytically from the beginning to the end of the surah by using the method of interpretation based on the hadith, namely by mentioning the arguments of the hadith sahih, the fatwa of the companions and the tabi‘i>n. The characteristic or purpose of this book is fiqh oriented, which tends to the Shafi‘i fiqh.   Abstrak Tulisan ini mendeskripsikan metode penafsiran dalam kitab Ma’a>lim al-tanzi>l karya al-bagawi. Kitab tafsir ini merupakan salah satu di antara kitab-kitab tafsir yang ditulis berdasarkan riwayat, yang oleh para ulama tafsir diakui terhindar dari bid’ah dan hadis dhaif (lemah. Penulis buku ini adalah Imam Abu Muhammad Husain bin Mas‘u>d al-Farra>‘ al-Bagawi al-Syafi‘i>, wafat pada tahun 510 H. Kitab ini adalah kitab pertengahan yang mengutip penafsiran para Sahabat, ta>bi‘i>n, dan tabi‘i ta>bi‘i>n. Penafsiran diuraikan dengan pilihan diksi yang mudah, sederhana, dan ringkas. Penukilan dari interpretasi ulama salaf tanpa menyebutkan sanad karena telah disebutkan dalam pendahuluan bukunya. Buku ini pertama kali dicetak dalam satu edisi dengan tafsir Ibn Kas\\i>r dan tafsir al-Kha>zin. Kitab ini menafsirkan al-Qur’an secara

Cómo la radio involucra al oyente en la elaboración de su agenda y programación por medio de las redes sociales.

OpenAIRE

Mancero Chacón, Andrea Susana

2012-01-01

Las redes tecnológicas de comunicación permiten hoy intercambiar información, debatir, planificar, tomar decisiones de manera mancomunada, pasar a la acción, coordinar esfuerzos, ilusiones, perspectivas y resultados. Actualmente, las discusiones académicas, los negocios, las relaciones internacionales, las actividades humanas más cotidianas están centradas en una revolución por demás significativa, porque tiene como base a las Tecnologías de Información y Comunicación, innovaciones que fav...

ALS Association

Science.gov (United States)

... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

AlN nanoparticle-reinforced nanocrystalline Al matrix composites: Fabrication and mechanical properties

International Nuclear Information System (INIS)

Liu, Y.Q.; Cong, H.T.; Wang, W.; Sun, C.H.; Cheng, H.M.

2009-01-01

To improve the specific strength and stiffness of Al-based composites, AlN/Al nanoparticles were in-situ synthesized by arc plasma evaporation of Al in nitrogen atmosphere and consolidated by hot-pressing to fabricate AlN nanoparticle-reinforced nanocrystalline Al composites (0-39 vol.% AlN). Microstructure characterization shows that AlN nanoparticles homogeneously distribute in the matrix of Al nanocrystalline, which forms atomically bonded interfaces of AlN/Al. The hardness and the elastic modulus of the nanocomposite have been improved dramatically, up to 3.48 GPa and 142 GPa, respectively. Such improvement is believed to result from the grain refinement strengthening and the interface strengthening (load transfer) between the Al matrix and AlN nanoparticles

Comparison of one and two-neutron transfer near the Coulomb barrier for the 27Al(18O, 16O)29Al, 27Al(18O, 17O)28Al and 27Al(13C, 12C)28Al reactions

International Nuclear Information System (INIS)

Schiller, S.A.; Eck, J.S.

1975-01-01

Total reaction cross sections for the transfer reactions 27 Al( 18 O, 16 O) 29 Al, 27 Al( 18 O, 17 O) 28 Al and 27 Al( 13 C, 12 C) 28 Al are reported for center-of-mass energies between 13 and 20 MeV for 18 O projectiles and between 11 and 17.5 MeV for 13 C projectiles. The reaction products, 29 Al, and 28 Al, beta decay to 29 Si and 28 Si, respectively, and the subsequent γ decays of 29 Si and 28 Si were measured. Due to the relatively long beta decay half lives, data were taken in a beam-off mode, resulting in very clean spectra. Total cross sections were calculated and compared with a theoretical model for barrier penetration proposed by C.Y. Wong. Differences between 18 O induced one and two-neutron total transfer reaction cross sections are discussed. (orig.) [de

Al-matrix composite materials reinforced by Al-Cu-Fe particles

International Nuclear Information System (INIS)

Bonneville, J; Laplanche, G; Joulain, A; Gauthier-Brunet, V; Dubois, S

2010-01-01

Al-matrix material composites were produced using hot isostatic pressing technique, starting with pure Al and icosahedral (i) Al-Cu-Fe powders. Depending on the processing temperature, the final reinforcement particles are either still of the initial i-phase or transformed into the tetragonal ω-Al0 0.70 Cu 0.20 Fe 0.10 crystalline phase. Compression tests performed in the temperature range 293K - 823K on the two types of composite, i.e. Al/i and Al/ω, indicate that the flow stress of both composites is strongly temperature dependent and exhibit distinct regimes with increasing temperature. Differences exist between the two composites, in particular in yield stress values. In the low temperature regime (T ≤ 570K), the yield stress of the Al/ω composite is nearly 75% higher than that of the Al/i composite, while for T > 570K both composites exhibit similar yield stress values. The results are interpreted in terms of load transfer contribution between the matrix and the reinforcement particles and elementary dislocation mechanisms in the Al matrix.

Piezo-tunnel effect in Al/Al2O3/Al junctions elaborated by atomic layer deposition

Science.gov (United States)

Rafael, R.; Puyoo, E.; Malhaire, C.

2017-11-01

In this work, the electrical transport in Al/Al2O3/Al junctions under mechanical stress is investigated in the perspective to use them as strain sensors. The metal/insulator/metal junctions are elaborated with a low temperature process (≤200 °C) fully compatible with CMOS back-end-of-line. The conduction mechanism in the structure is found to be Fowler-Nordheim tunneling, and efforts are made to extract the relevant physical parameters. Gauge factors up to -32.5 were found in the fabricated devices under tensile stress. Finally, theoretical mechanical considerations give strong evidence that strain sensitivity in Al/Al2O3/Al structures originates not only from geometrical deformations but also from the variation of interface barrier height and/or effective electronic mass in the tunneling oxide layer.

Generation and evolution of nanoscale AlP and Al{sub 13}Fe{sub 4} particles in Al-Fe-P system

Energy Technology Data Exchange (ETDEWEB)

Qiao, Huan; Gao, Tong; Zhu, Xiangzhen; Wu, Yuying; Qian, Zhao; Liu, Xiangfa, E-mail: xfliu@sdu.edu.cn

2015-02-15

Highlights: • Diffusion and gradual solid reactions between Al and Fe{sub x}P phases in Al-Fe-P alloy were investigated. • Nanoscale AlP clusters are in-situ generated and evolve during the whole process. • This novel Al-Fe-P alloy has an excellent low-temperature refining performance on hypereutectic Al-Si alloy. - Abstract: In this paper, the gradual solid reactions between Al and Fe{sub x}P phases in Al-Fe-P alloy were investigated. The results show that the whole reaction process undergoes four main stages: the diffusion of Al atom, the generation of (Al, Fe, P) intermediate compound, the precipitation of nano AlP and Al{sub 13}Fe{sub 4} clusters and their growth to submicron particles. The microstructure of Fe-P particles evolves from the “egg-type”, the “sponge-type” to the “sesame-cake” structure. AlP and Al{sub 13}Fe{sub 4} nano phases have in-situ generated and evolved during the whole process. The gradual reaction mechanism has been discussed. Furthermore, a novel Al-Fe-P alloy which contains (Al, Fe, P) intermediate compounds and nano AlP particles has been synthesized and its low-temperature refining performance on A390 alloy has also been investigated.

Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

Science.gov (United States)

Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

2016-08-15

Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients. Copyright © 2016 Elsevier B.V. All rights reserved.

Radiation detection with Nb/Al-AlOx/Al/Nb superconducting tunnel junctions

International Nuclear Information System (INIS)

Matsumura, Atsuki; Takahashi, Toru; Kurakado, Masahiko

1992-01-01

Superconductor radiation detectors have the possibility of 20-30 times better energy resolution than that of a high resolution Si detector. We fabricated Nb/Al-AlOx/Al/Nb superconducting tunnel junctions with low leakage current. X rays were detected with large area junctions of 178x178 μm 2 . High energy resolution of 160 eV for 5.9 keV was obtained. We also fabricated series connected junctions which covers a rather large area of 4x4 mm 2 . α particles injected into the rear substrate were detected using nonthermal phonons induced by the radiations in the substrate. (author)

ALS-Plus Syndrome: Non-Pyramidal Features in a Large ALS Cohort

Science.gov (United States)

McCluskey, Leo; Vandriel, Shannon; Elman, Lauren; Van Deerlin, Vivianna M.; Powers, John; Boller, Ashley; Wood, Elisabeth McCarty; Woo, John; McMillan, Corey T.; Rascovsky, Katya; Grossman, Murray

2014-01-01

Objective Autopsy studies show widespread pathology in amyotrophic lateral sclerosis (ALS), but clinical surveys of multisystem disease in ALS are rare. We investigated ALS-Plus syndrome, an understudied group of patients with clinical features extending beyond pyramidal and neuromuscular systems with or without cognitive/behavioral deficits. Methods In a large, consecutively-ascertained cohort of 550 patients with ALS, we documented atypical clinical manifestations. Genetic screening for C9orf72 hexanucleotide expansions was performed in 343 patients, and SOD1, TARDBP, and VCP were tested in the subgroup of patients with a family history of ALS. Gray matter and white matter imaging was available in a subgroup of 30 patients. Results Seventy-five (13.6%) patients were identified with ALS-Plus syndrome. We found disorders of ocular motility, cerebellar, extrapyramidal and autonomic functioning. Relative to those without ALS-Plus, cognitive impairment (8.0% vs 2.9%, p=0.029), bulbar-onset (49.3% vs 23.2%, pALS-Plus. Survival was significantly shorter in ALS-Plus (29.66 months vs 42.50 months, p=0.02), regardless of bulbar-onset or mutation status. Imaging revealed significantly greater cerebellar and cerebral disease in ALS-Plus compared to those without ALS-Plus. Conclusions ALS-Plus syndrome is not uncommon, and the presence of these atypical features is consistent with neuropathological observations that ALS is a multisystem disorder. ALS-Plus syndrome is associated with increased risk for poor survival and the presence of a pathogenic mutation. PMID:25086858

Aproximación al concepto de ansiedad en psicología: su carácter complejo y multidimensional

Directory of Open Access Journals (Sweden)

María Teresa GONZÁLEZ MARTÍNEZ

2009-11-01

Full Text Available La ansiedad, estado emotivo y respuesta que surge cuando uno se halla expuesto a situaciones que impliquen peligro o amenaza, es una experiencia universal y cotidiana para todo ser humano. Es, además, una conducta que cumple una función esencialmente adaptativa. Ahora bien, la ansiedad puede ser también una conducta patológica, cuando, por la continuidad de las respuestas o la excesiva intensidad de las mismas, no se logra establecer el equilibrio entre el sujeto y los estímulos. Estamos, pues, ante un concepto complejo en el que existen implícitos diferentes significados. A ello ha contribuido el hecho de que la ansiedad es un tema abordado desde ámbitos disciplinarios muy diferentes (filosofía, biología, psicología, sociología, entre otros.] Pero especialmente esto ha sido favorecido por la pluralidad teórica de la psicología que lleva a cada teoría a proponer un modelo explicativo de la ansiedad. A pesar de ello, los progresos actuales sobre el conocimiento de los mecanismos de la ansiedad y sus consecuencias, permiten que se haya llegado al acuerdo de un concepto de ansiedad, válido desde los distintos ámbitos disciplinarios y teóricos, como una forma de conducta compleja y multidimensional en la que existen componentes de respuesta fisiológicos, motores y subjetivo-cognitivos. Este patrón de conducta surge cuando un individuo se halla expuesto a estímulos interpretados como amenazantes, bien porque objetivamente lo sean, o porque él subjetivamente así lo vivencia.

Tailoring ultrafine grained and dispersion-strengthened Ti 2 AlC/TiAl ...

Indian Academy of Sciences (India)

In situ Ti 2 AlC/TiAl composite was fabricated by hot-pressing method via the reaction system of Ti 3 AlC 2 and Ti-Al pre-alloyed powders at low temperature of 1150 ∘ C. The composite mainly consisted of TiAl, Ti 3 Al and Ti 2 AlC phases. Fine Ti 2 AlC particles were homogeneously distributed and dispersed in the matrix.

Assessing behavioural changes in ALS: cross-validation of ALS-specific measures.

Science.gov (United States)

Pinto-Grau, Marta; Costello, Emmet; O'Connor, Sarah; Elamin, Marwa; Burke, Tom; Heverin, Mark; Pender, Niall; Hardiman, Orla

2017-07-01

The Beaumont Behavioural Inventory (BBI) is a behavioural proxy report for the assessment of behavioural changes in ALS. This tool has been validated against the FrSBe, a non-ALS-specific behavioural assessment, and further comparison of the BBI against a disease-specific tool was considered. This study cross-validates the BBI against the ALS-FTD-Q. Sixty ALS patients, 8% also meeting criteria for FTD, were recruited. All patients were evaluated using the BBI and the ALS-FTD-Q, completed by a carer. Correlational analysis was performed to assess construct validity. Precision, sensitivity, specificity, and overall accuracy of the BBI when compared to the ALS-FTD-Q, were obtained. The mean score of the whole sample on the BBI was 11.45 ± 13.06. ALS-FTD patients scored significantly higher than non-demented ALS patients (31.6 ± 14.64, 9.62 ± 11.38; p ALS-FTD-Q was observed (r = 0.807, p ALS-FTD-Q. Good construct validity has been further confirmed when the BBI is compared to an ALS-specific tool. Furthermore, the BBI is a more comprehensive behavioural assessment for ALS, as it measures the whole behavioural spectrum in this condition.

Plastic deformation of Al13Fe4 particles in Al-Al13Fe4 by high-speed compression

International Nuclear Information System (INIS)

Yoneyama, N.; Mizoguchi, K.; Kumai, S.; Sato, A.; Kiritani, M.

2003-01-01

Spray-formed Al-Fe alloys having undergone high-speed deformation were examined under a high-voltage electron microscope. Two types of specimens were examined; one containing fine Al 13 Fe 4 particles, and the other containing large particles. In the former specimen, deformation is found to proceed in three patterns, depending on specimen thickness and strain rate: (1) without deformation of the Al 13 Fe 4 ; (2) breaking of the Al 13 Fe 4 ; or (3) melting of the Al 13 Fe 4 . Local melting is found to alter some of the Al 13 Fe 4 particles, to impart five-fold symmetry in diffraction or an amorphous structure. In the latter specimen, introduction of glide dislocations enabled us to determine a shear system in the mc102 monoclinic c2/m crystal of Al 13 Fe 4 . On the bases of these observations, the mechanism of high-speed deformation is discussed while taking into account the highly stressed and/or heated states of Al 13 Fe 4 embedded in Al matrix

Synthesis and characterization of pillared bentonite with Al, AL/Fe and impregnated with Pd; Sintese e caracterizacao de bentonitas pilarizadas com Al, AL/Fe e impregnadas com Pd

Energy Technology Data Exchange (ETDEWEB)

Silva, Marcus Vinicius Costa; Pizarro, Alejandro Herrero; Molina, Carmen Belen, E-mail: marcus.ufpa@yahoo.com.br [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Instituto de Tecnologia. Faculdade de Engenharia Quimica; Seccion de Ingenieria Quimica, Facultad de Ciencias, Universidad Autonoma de Madri (Spain)

2017-10-01

In this work, a north american bentonite was pillared with Al and Al/Fe, creating the Al-PILC and Al-Fe-PILC, respectively. Then the Pd was impregnated in the materials, generating Pd-Al-PILC and Pd-Al-Fe-PILC, respectively. The samples were characterized by X-ray diffraction, differential thermal analysis and thermogravimetric and N{sub 2} adsorption at 77 K to determine the specific surface area by BET method (Brunauer - Emmett - Teller). There was an increase in the basal spacing of bentonite from 12.4Å in the original sample to 17.81Å in the Al-Fe-PILC, 17.20Å in Pd-Al-PILC and 17.05Å in the Pd-Al-Fe-PILC. The specific surface area increased from 19.05m{sup 2}/g in the original sample to 173.49m{sup 2}/g in Al-Fe-PILC, 101.31m{sup 2}/g to Pd-Al-PILC and 92m{sup 2}/g in Pd-Al-Fe-PILC. The pillaring process was successful and the synthesized materials have great potential for use as catalysts. (author)

Electrodeposition of Al from a 1-butylpyrrolidine-AlCl3 ionic liquid

Directory of Open Access Journals (Sweden)

Giridhar Pulletikurthi

2015-12-01

Full Text Available The addition of 1-butylpyrrolidine to AlCl3 results in the formation of an electrolyte that is suited to Al deposition. The feasibility of electrodepositing Al from the synthesized electrolyte was investigated. Several compositions of AlCl3 and 1-butylpyrrolidine were prepared for this purpose. These mixtures show a different phase behavior at various compositions of AlCl3 and 1-butylpyrrolidine. IR, Raman and NMR spectroscopy were employed to characterize the synthesized liquids. Among the prepared compositions, 1:1.2 mol ratio of 1-butylpyrrolidine:AlCl3 and the upper phase of 1:1.3 mol ratio of 1-butylpyrrolidine:AlCl3 were found to be suitable for Al electrodeposition at room temperature (RT. Uniform and thick (~µm thick layers of Al were obtained on copper at RT. Al deposition occured from the cationic species of AlCl3−xLy+ (where x≤2, y=1–2, and L=1-butylpyrrolidine in this electrolyte. This behavior is contrary to the well investigated classic AlCl3 based ionic liquids, where the deposition of Al occurs mainly from anionic Al2Cl7− ions.

Orientation of Al3Ti platelets in Al-Al3Ti functionally graded material manufactured by centrifugal method

International Nuclear Information System (INIS)

Watanabe, Y.; Fukui, Y.

1997-01-01

Al-Al 3 Ti functionally graded materials (FGMs) were manufactured by the centrifugal method with a commercial ingot of Al-5 mass% Ti master alloy. The alloy was melted at a liquid/solid coexisting temperature, at which Al 3 Ti remains as a solid, and then it was cast into a thick-walled ring. It was found that the Al-Al 3 Ti functionally graded material can be successfully fabricated by the centrifugal method. It was also found that the volume fraction of the Al 3 Ti can be increased by repetition of the centrifugal method. Since the shape of Al 3 Ti particles in a commercial alloy ingot is that of a platelet, the Al 3 Ti particles are arranged with their platelet planes nearly perpendicular to the radial direction. The orientation effects become stronger when the G number becomes larger. Although the final centrifugal casting was conducted under a very large centrifugal force for the specimen cast three times, the orientation effects were weaker than those in the specimen cast one time. From these observations, it is concluded that the origin of orientation of Al 3 Ti platelets can be attributed to the angular velocity gradient of the melt along the radial direction produced by the difference in the viscosity. (orig.)

In situ synthesis of Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composite by vacuum sintering mechanically alloyed TiAl powder coated with CNTs

Energy Technology Data Exchange (ETDEWEB)

Wang, Jian [Department of Materials Science and Engineering of Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China); Zhao, Naiqin, E-mail: nqzhao@tju.edu.cn [State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin (China); Department of Materials Science and Engineering of Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China); Nash, Philip [Thermal Processing Technology Center, Illinois Institute of Technology, IL (United States); Liu, Enzuo; He, Chunnian; Shi, Chunsheng; Li, Jiajun [Department of Materials Science and Engineering of Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China)

2013-11-25

Highlights: •Using zwitterionic surfactant to enhance the dispersion of the CNTs on the powder surface. •CNTs as carbon source decreased the formation temperature of Ti{sub 2}AlC. •Al{sub 2}O{sub 3} was generated in situ from the oxygen atoms introduced in the drying procedure. •Nanosized Ti{sub 3}Al was precipitated at 1250 °C and distribute in the TiAl matrix homogeneously. •Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composite was synthesized in situ by sintering pre-alloy Ti–Al coated with CNTs. -- Abstract: Bulk Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composites were in situ synthesized by vacuum sintering mechanically alloyed Ti–50 at.% Al powders coated with carbon nanotubes (CNTs). The pre-alloyed Ti–50 at.% Al powder was obtained by ball milling Ti and Al powders. The multi-walled carbon nanotubes as the carbon resource were covered on the surface of the pre-alloyed powders by immersing them into a water solution containing the CNTs. A zwitterionic surfactant was used to enhance the dispersion of the CNTs on the powder surface. The samples were cold pressed and sintered in vacuum at temperatures from 950 to 1250 °C, respectively. The results show that the reaction of forming Ti{sub 2}AlC can be achieved below 950 °C, which is 150 °C lower than in the Ti–Al–TiC system and 250 °C lower than for the Ti–Al–C system due to the addition of CNTs. Additionally, the reinforcement of Al{sub 2}O{sub 3} particles was introduced in situ in Ti{sub 2}AlC/TiAl by the drying process and subsequent sintering of the composite powders. Dense Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composites were obtained by sintering at 1250 °C and exhibited a homogeneous distribution of Ti{sub 2}AlC, Al{sub 2}O{sub 3} and precipitated Ti{sub 3}Al particles and a resulting high hardness.

27Al NMR studies of NpPd5Al2

International Nuclear Information System (INIS)

Chudo, H.; Sakai, H.; Tokunaga, Y.; Kambe, S.; Aoki, D.; Homma, Y.; Shiokawa, Y.; Haga, Y.; Ikeda, S.; Matsuda, T.D.; Onuki, Y.; Yasuoka, H.

2009-01-01

We present 27 Al NMR studies for a single crystal of the Np-based superconductor NpPd 5 Al 2 (T c =4.9K). We have observed a five-line 27 Al NMR spectrum with a center line and four satellite lines separated by first-order nuclear quadrupole splittings. The Knight shift clearly drops below T c . The temperature dependence of the 27 Al nuclear spin-lattice relaxation rate shows no coherence peak below T c , indicating that NpPd 5 Al 2 is an unconventional superconductor with an anisotropic gap. The analysis of the present NMR data provides evidence for strong-coupling d-wave superconductivity in NpPd 5 Al 2 .

Magnetic tunnel junctions with AlN and AlNxOy barriers

International Nuclear Information System (INIS)

Schwickert, M. M.; Childress, J. R.; Fontana, R. E.; Kellock, A. J.; Rice, P. M.; Ho, M. K.; Thompson, T. J.; Gurney, B. A.

2001-01-01

Nonoxide tunnel barriers such as AlN are of interest for magnetic tunnel junctions to avoid the oxidation of the magnetic electrodes. We have investigated the fabrication and properties of thin AlN-based barriers for use in low resistance magnetic tunnel junctions. Electronic, magnetic and structural data of tunnel valves of the form Ta (100 Aa)/PtMn (300 Aa)/CoFe 20 (20 Aa - 25 Aa)/barrier/CoFe 20 (10 - 20 Aa)/NiFe 16 (35 - 40 Aa)/Ta (100 Aa) are presented, where the barrier consists of AlN, AlN x O y or AlN/AlO x with total thicknesses between 8 and 15 Aa. The tunnel junctions were sputter deposited and then lithographically patterned down to 2 x 2μm 2 devices. AlN was deposited by reactive sputtering from an Al target with 20% - 35% N 2 in the Ar sputter gas at room temperature, resulting in stoichiometric growth of AlN x (x=0.50±0.05), as determined by RBS. TEM analysis shows that the as-deposited AlN barrier is crystalline. For AlN barriers and AlN followed by natural O 2 oxidation, we obtain tunnel magnetoresistance >10% with specific junction resistance R j down to 60Ωμm 2 . [copyright] 2001 American Institute of Physics

Los espacios de la cocina mexicana al albor del siglo XX: La creación alquímica de olores, sabores y texturas

OpenAIRE

Arana López, Gladys Noemí

2012-01-01

El objetivo principal de este documento fue la comprensión integral de la cocina como el espacio de la vivienda en donde se amalgaman múltiples prácticas culturales, en donde lo intangible se vuelve materia y en donde lo material se vuelve incorpóreo. El universo de estudio se conformó por aquellas cocinas localizadas en las casas de la élite mexicana entre los años 1886-1916, y se analizó con el cuerpo herramental empleado para el estudio de la vida cotidiana en conjunción con los utilizados...

A study of the Al-rich part of the Al-Re alloy system

International Nuclear Information System (INIS)

Balanetskyy, S.; Grushko, B.

2008-01-01

The Al-rich part of the Al-Re phase diagram was reinvestigated by scanning and transmission electron microscopy, powder X-ray diffraction and differential thermal analysis. The earlier reported Al 12 Re, Al 6 Re, and Al 11 Re 4 phases were confirmed. Close to the Al 4 Re composition a high-temperature h-Al 4 Re and a low-temperature l-Al 4 Re phase were found to be formed at slightly different compositions. Both exhibited compositional ranges. A new phase was revealed close to the Al 3 Re composition. The Al 11 Re 4 phase is formed congruently at 1650 deg. C, Al 3 Re peritectically at 1610 deg. C, h-Al 4 Re peritectically at 1410 deg. C, l-Al 4 Re peritectically at ∼1000 deg. C, Al 6 Re peritectically at 813 deg. C and Al 12 Re peritectically at 746 deg. C. Finally, the Al 12 Re-(Al) eutectic is formed at 658 deg. C. The Al 3 Re and h-Al 4 Re are decomposed by eutectoid reactions at ∼946 and 833 deg., respectively. The structure of the h-Al 4 Re phase has not yet been clarified, but it is distinctly different from the Al 4 W phase suggested earlier. The structure of l-Al 4 Re was confirmed. The Al 3 Re phase was found to have a monoclinic structure with a = 0.5180(4) nm, b = 3.97641(9) nm, c = 0.4955(3) nm and β = 99.55(7) o

Acercamiento crítico al holismo en la educación inicial: una discusión metodológica

Directory of Open Access Journals (Sweden)

Cynthia Orozco Castro

2014-10-01

la niñez en dos aulas de dos centros infantiles universitarios: Centro Infantil Laboratorio y Centro Infantil Ermelinda Mora. Tomando en cuenta los retos educativos que surgen en nuestra era, la investigación se focalizó en aulas que utilizaban modalidades de atención infantil que pretenden ser holistas y críticas, evaluando la coherencia entre las metas educativas de este paradigma y las acciones cotidianas desde la problematización del currículo oculto y sus implicaciones. Se asume la investigación cualitativa con miras a la decodificación y transformación de los espacios educativos, desde una acción dialógica y propositiva.

Abu al-Layth al-Libi

Science.gov (United States)

2015-02-01

success. As an Arab participant acknowledged very early on, “the situation was really harsh. All the brothers were tired,” as they lacked food and... glorious battles that occurred during the early Islamic period.133 He stressed the importance of the battlefield as the path to achieve honor and dignity...diaspora in Waziristan. In the words of Walid Othmani, a French jihadi trained by al-Qa`ida in Waziristan in 2008, “[Al-Libi] was someone well-known and

SAP-like ultrafine-grained Al composites dispersion strengthened with nanometric AlN

International Nuclear Information System (INIS)

Balog, M.; Krizik, P.; Yan, M.; Simancik, F.; Schaffer, G.B.; Qian, M.

2013-01-01

This paper reports the development of novel Sinter-Aluminum-Pulver (SAP)-like Al–AlN nanocomposites via replacing the native Al 2 O 3 thin films on fine Al powder with a large volume fraction of in situ formed nanometric AlN dispersoids. Fine gas-atomized Al powder (d 50 =1.3 µm) compacts were first partially nitrided at 590 °C in flowing nitrogen, controlled by a small addition of Sn (0.3–0.4 wt%), and subsequently consolidated by hot direct extrusion. The resulting Al–AlN composites consisted of submicrometric Al grains reinforced with nanometric AlN dispersoids together with some nanometric Al 2 O 3 dispersoids. An Al–13 vol% AlN nanocomposite fabricated this way achieved exceptional ultimate tensile strength of 227 MPa, yield strength of 195 MPa and Young's modulus of 66 GPa at 300 °C, superior to typical SAP materials and coarse grained Al–AlN composites. In addition, the Al–13 vol% AlN nanocomposite exhibited good thermal stability up to 500 °C. The strengthening mechanism is discussed

Analisis Kecenderungan Manhaj Akidah Shaykh Shams al-Din al-Sumatera’i

Directory of Open Access Journals (Sweden)

MOHD HAIDHAR KAMARZAMAN

2016-12-01

Full Text Available Shaykh Shams al-Din al-Sumatera'i is a very great and respected scholar during 16th and 17th century of Acheh. His knowledge in various fields recognized by local and international scholars. He had been a Qadi Malik al-’Adil, a religious leader, who became a referred by communities and country during the reign of the three Sultans of Aceh. He has authored nearly 40 pieces of books related to the theology and sufism. This study focuses on the methods used by Shaykh Shams al-Din al-Sumatera'i in his theological writings. This study found that Shaykh Shams al-Din al-Sumatera'i had used six methods in the such writings.

Museo de Bellas Artes de Castellón

Directory of Open Access Journals (Sweden)

Moreno Mansilla, Luis

2000-12-01

Full Text Available The Castellón 's "Museo de Bellas Artes ", enclose a gardened cloister, with magnificent cypresses, as a part of the old college "Serra Espadá ". The building housing the Museum Rooms, is like piled up grounds of similar dimensions in which a double high space is moving like cascade voids, with the same elements, turning each ground in a different place. lts slim proportions takes care of the town tressors, like an sphinx protected by a net of alluminium smelting plates, in which, its function is engraved like in the old roman bricks preserved by the Museum: "MUSEU DE CASTELLÓ"El Museo de Bellas Artes de Castellón gira alrededor de un claustro ajardinado con unos magníficos cipreses, perteneciente al antiguo colegio de Serra Espadá. La construcción que alberga las salas es un apilado de plantas de iguales dimensiones, en las que un espacio a doble altura se va desplazando, como una cascada de vacíos que, con los mismos elementos, convierte a cada planta en un lugar diferente. Esbelto de proporciones y mirando al frente, guarda los tesoros de la ciudad como una esfinge, protegido por una malla de placas de fundición de aluminio en las que se graba, como quedaba escrito en los antiguos ladrillos romanos que conserva el museo, su destino: MUSEU DE CASTELLÓ.

Ultrasonic spot welding of Al/Mg/Al tri-layered clad sheets

International Nuclear Information System (INIS)

Macwan, A.; Patel, V.K.; Jiang, X.Q.; Li, C.; Bhole, S.D.; Chen, D.L.

2014-01-01

Highlights: • The optimal welding condition is achieved at 100 J and 0.1 s. • Failure load first increases and then decreases with increasing welding energy. • The highest failure load after welding is close to that of the clad sheets. • At low energy levels failure occurs in the mode of interfacial failure. • At high energy levels failure takes place at the edge of nugget region. - Abstract: Solid-state ultrasonic spot welding (USW) was used to join Al/Mg/Al tri-layered clad sheets, aiming at exploring weldability and identifying failure mode in relation to the welding energy. It was observed that the application of a low welding energy of 100 J was able to achieve the optimal welding condition during USW at a very short welding time of 0.1 s for the tri-layered clad sheets. The optimal lap shear failure load obtained was equivalent to that of the as-received Al/Mg/Al tri-layered clad sheets. With increasing welding energy, the lap shear failure load initially increased and then decreased after reaching a maximum value. At a welding energy of 25 J, failure occurred in the mode of interfacial failure along the center Al/Al weld interface due to insufficient bonding. At a welding energy of 50 J, 75 J and 100 J, failure was also characterized by the interfacial failure mode, but it occurred along the Al/Mg clad interface rather than the center Al/Al weld interface, suggesting stronger bonding of the Al/Al weld interface than that of the Al/Mg clad interface. The overall weld strength of the Al/Mg/Al tri-layered clad sheets was thus governed by the Al/Mg clad interface strength. At a welding energy of 125 J and 150 J, thinning of weld nugget and extensive deformation at the edge of welding tip caused failure at the edge of nugget region, leading to a lower lap shear failure load

KITAB AL-SANĪ AL-MAṬĀLIB: INTERKONEKSI NAHWU DAN TASAWUF

Directory of Open Access Journals (Sweden)

Zakiyah Zakiyah

2012-12-01

Tulisan ini mereview buku yang berjudul al-Sanī al-Maṭālib yang ditulis oleh Kiai Nur Iman Mlangi Yogyakarta. Buku ini ditulis dalam bahasa Arab yang me­ngandung interkoneksi antara ilmu Nahwu (tata bahasa Arab dengan mis­tisis­me. Buku ini sangat menarik karena kenyataan bahwa kedua pengetahuan tersebut memiliki aturan sendiri-sendiri. Selain itu, sangat sedikit penulis yang menulis dengan gaya seperti itu. Salah satunya adalah Syaikh Abdul Qadir bin Ahmad al-Kuhany dengan karyanya yang berjudul Manniyat al-Fāqir al-Munjarid wa Sayrat al-Murīd al-Mutafarrid. Buku al-Saniy al-Muthalib diduga telah ditulis pada akhir abad ke-18 atau awal abad ke-19, menurut periode kehidupan Kiai Nur Iman yaitu sekitar pertengahan abad ke-18. Aturan Nahwu dalam buku ini dijelaskan secara teosofi yang dimulai dengan penjelasan mengenai tauhid (keesaan Tuhan sebagai kajian dasar bagi orang Islam, yang diikuti dengan makna dari masing-masing aturan bahasa Arab dalam aspek mistiknya.

Rekonstruksi Konsep Ijtihad: Studi Pemikiran Ben’umar tentang al-Ijtihad fi al-Waqi’

Directory of Open Access Journals (Sweden)

Duski Ibrahim

2015-10-01

Full Text Available This paper is the result of a research that evaluating the reconstruction the concept of ijtihad, by discuss the idea of al-Ijtihad Ben'umar fi al-waqi’. This paper concludes that Al-Ijtihad fi al-waqi’ is actually a form of collective ijtihad (al ijtihad al-jama'i, by gathering the experts of shari'ah law (fuqaha` ash-shar'i and experts Researchers and scientists (khubara` al-'ashr. Because experts know the nash purposes, while researchers and scientists (al-khubara` know the reality (al-waqi’, the effects in the future (ma'alat = future effect and challenges (tahaddiyat. The idea of formulating the concept of al-ijtihad fi al-waqi’ emerged based on a premise that ijtihad is a creation of experts to implement Islamic law in society. Therefore, the concept of ijtihad experienced a significant development, start from using the nash from the language aspects, continue to the using of logic. At the moment when the situation people are increasingly develop, then the creation of ijtihad become a necessary to developed, for example in the form of al-ijtihad fi al-waqi’ . About the source of the formation of the concept of al -ijtihad fi al-waqi’ comes from theory about the functions of nash, al-manath theory in Islamic law, and supported by the theory of al-mashlalah al-mursalah.

L'autonomia della banca Centrale in Italia e in Europa. (Central bank independence in Italy and in Europe

Directory of Open Access Journals (Sweden)

A. JOZZO

2013-12-01

Full Text Available I problemi che riguardano il rapporto tra le autorità monetarie ,del potere  esecutivo e potere legislativo è attualmente al centro di un dibattito politico ed economico , sia a livello nazionale che a livello europeo . A livello europeo il progresso dell'integrazione economica e monetaria solleva la questione dell'autonomia delle autorità monetarie responsabili della gestione valutaria . A livello nazionale la necessità di migliorare l'economia in Italia e ridurre l'inflazione spiega la proposta di aumentare l'indipendenza della Banca d' Italia  rispetto al Tesoro . Questi due aspetti sono tuttavia interdipendenti . Il presente lavoro fa riferimento al dibattito del dopoguerra che ha avuto luogo in Germania per quanto riguarda la ricostruzione di una banca centrale , al fine di analizzare il presente questione dell'indipendenza della banca centrale in Italia e in Europa The problems concerning the relationship between monetary authorities, executive and legislative powers is currently at the centre of a political and economic debate, both at the national and at the European level. At the European level the progress of economic and monetary integration raises the issue of the autonomy of monetary authorities in charge of currency management. At the national level the need to improve Italy’s economy and reduce inflation explains the proposal to increase the Bank of Italy’s independence with respect to the Treasury. These two aspects are, however, interdependent. The present work makes reference to the post-war debate that took place in Germany regarding the reconstruction of a central bank, in order to analyse the present issue of central bank independence in Italy and Europe.JEL: E58, F36

Perspectivas de desarrollo para el documentalismo, el documental en soporte digital

Directory of Open Access Journals (Sweden)

Lic. Manuela Penafria

1999-01-01

Full Text Available El documental tiene una historia reciente. Al contrario de lo que generalmente se afirma, entendemos que el documental no nace al mismo tiempo que el cine. Las primeras experiencias con las imágenes en movimiento tenían por objeto tan sólo registrar acontecimientos de la vida cotidiana de las personas y de los animales. Así, la contribución de los pioneros del cine para el documental fue mostrar que el material base de trabajo para el documental son las imágenes recogidas en los lugares donde ocurren los acontecimientos. O dicho de otra forma, es el registro in loco que encontramos en el inicio del cine que constituye la raíz (principio base en que se asienta la producción documental.

Hostelería para fines específicos en el aula de E/LE

Directory of Open Access Journals (Sweden)

David Giménez Folqués

2012-08-01

Full Text Available Cuando un alumno extranjero se dispone a estudiar un nuevo idioma, tiene laesperanza de volver a su país sabiendo al menos desenvolverse en los ámbitos másesenciales: en una conversación cotidiana, en el banco, en una entrevista de trabajo o,por qué no, en un restaurante. Así pues, hemos seleccionado la Hostelería para finesespecíficos en el aula de E/LE como proyecto con el fin de auxiliar al alumno en estecampo. Este objetivo lo llevamos a cabo mediante un enfoque por tareas, es decir,adquiriremos las herramientas necesarias antes de emprender la tarea que nos interesa:saber desenvolvernos en un restaurante. Para ello, hemos seleccionado los tiemposverbales y el vocabulario que hemos considerado esenciales para el desarrollo de nuestroobjetivo.

Pupilajes, gobernaciones y casas de estudiantes en Salamanca (1590-1630

Directory of Open Access Journals (Sweden)

Luis Enrique RODRÍGUEZ-SAN PEDRO BEZARES

2009-12-01

Full Text Available Sobre la vida cotidiana en la España de los siglos XVI-XVII no podemos decir que estemos faltos de estudios y trabajos, sino que por el contrario hubo tiempo en que proliferaron publicaciones en este sentido, más o menos evocadoras y descriptivas unas, elogiosonostálgicas otras, pintorescas y basadas en fuentes literarias las más de ellas. La riqueza y calidad literaria de la época que estudiaban las hicieron propicias. No faltaron en estos retablos los lienzos dedicados al bullicioso mundo estudiantil, que más o menos tópico desde el prisma picaresco era desplegado ante nosotros en todo su claroscuro. Todo ello contribuía al conocimiento de los modos de vida estudiantiles y de la historia social.

Guerra y museología: una introducción a la teoría de los museos

Directory of Open Access Journals (Sweden)

Maximiliano E. Korstanje

2013-01-01

Full Text Available Los museos ya son parte de nuestra vida cotidiana, en ellos uno puede llevar a su familia, a sus hijos, porque siempre encierran una forma de la realidad antes no contemplada. Lo que a lo largo de los años ha hecho del museo un lugar de entretenimiento y educación ha sido nuestra curiosidad, pero al margen de ella, existen factores económicos, sociales y políticos que vinculan al museo con la habilidad humana para hacer y rememorar la guerra o eventos inesperados de un alto impacto para la sociedad (traumáticos como ser desastres naturales. El museo, de alguna u otra parte, parece sublimar todas nuestras expectativas respecto a nuestra destructividad y a la presencia de la muerte.

EXCLUSIÓN Y VIDA COTIDIANA DE LA ESCUELA SECUNDARIA: SIGNIFICADOS DE DOS ALUMNOS EN SITUACIÓN DE REPROBACIÓN

Directory of Open Access Journals (Sweden)

José Inés Lozano Andrade

2009-01-01

Full Text Available El alto índice de reprobación en la escuela secundaria mexicana, que se convierte en el antecedente inmediato de la exclusión vía el abandono escolar, es un problema grave en la educación mexicana. Aunque se conocen datos sobre diversidad de factores que pretenden comprender el fenómeno, poco se ha incursionado en el campo de los significados que los propios alumnos tienen al respecto. Aquí se pretende abonar a este propósito al analizar los significados hacia la escuela y su particular situación académica que dos alumnos con altos índices de reprobación presentan y se hacen candidatos a la exclusión. Esto es abordado desde la teoría de las representaciones sociales, ya que ello permitirá conocer la subjetividad producida al respecto. Usando una metodología cualitativa, es como se reconocen en la construcción de las representaciones sociales, la existencia de cuatro dimensiones que configuran esta realidad: el mercado laboral, la escuela, la familia, y los alumnos adolescentes, quienes aceptan en lo general, pero no sumisamente, que la escuela es un factor de movilidad social. Es un mal necesario. Las representaciones sociales en estos casos, revelan su carácter dialéctico y contradictorio, crítico y conformista hacia la escuela.

Study of the 26Al(n,p)26Mg and 26Al(n,α)23Na reactions using the 27Al(p,p')27Al inelastic scattering reaction

International Nuclear Information System (INIS)

Benamara, S; De Séréville, N; Hammache, F; Stefan, I; Roussel, P; Ancelin, S; Assié, M; Guillot, J; Le Crom, B; Lefebvre, L; Adsley, P; Laird, A M; Barton, C; Diget, C; Fox, S; Coc, A; Deloncle, I; Hamadache, C; Kiener, J; Lefebfre-Schuhl, A

2016-01-01

26 Al was the first cosmic radioactivity ever detected in the galaxy as well as one of the first extinct radioactivity observed in refractory phases of meteorites. Its nucleosynthesis in massive stars is still uncertain mainly due to the lack of nuclear information concerning the 26 Al(n,p) 26 Mg and 26 Al(n,α) 23 Na reactions. We report on a single and coincidence measurement of the 27 Al(p,p') 27 Al(p) 26 Mg and 27 Al(p,p') 27 Al(α) 23 Na reactions performed at the Orsay TANDEM facility aiming at the spectroscopy study of 27 Al above the neutron threshold. Fourteen states are observed for the first time within 350 keV above the 26 Al+n threshold. (paper)

AlN/Al dual protective coatings on NdFeB by DC magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Li Jinlong; Mao Shoudong; Sun Kefei [Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Li Xiaomin [Shanghai Institute of Ceramics Chinese Academy of Sciences, Shanghai 200050 (China); Song Zhenlun [Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)], E-mail: songzhenlun@nimte.ac.cn

2009-11-15

AlN/Al dual protective coatings were prepared on NdFeB by DC magnetron sputtering in a home-made industrial apparatus. Comparing with Al coating, AlN/Al coatings have a denser structure of an outmost AlN amorphous layer following an inner Al columnar crystal layer. The coatings and NdFeB substrate combine well, and moreover, there is occurrence of metallurgy bonding in the interface layer. Both Al and AlN/Al coatings have a good protective ability to NdFeB. Especially, the corrosion resistance of AlN/Al coated NdFeB is improved largely. AlN/Al and Al protective coatings not only do not deteriorate the magnetic properties of NdFeB, but contribute to their slight increase.

AlN/Al dual protective coatings on NdFeB by DC magnetron sputtering

International Nuclear Information System (INIS)

Li Jinlong; Mao Shoudong; Sun Kefei; Li Xiaomin; Song Zhenlun

2009-01-01

AlN/Al dual protective coatings were prepared on NdFeB by DC magnetron sputtering in a home-made industrial apparatus. Comparing with Al coating, AlN/Al coatings have a denser structure of an outmost AlN amorphous layer following an inner Al columnar crystal layer. The coatings and NdFeB substrate combine well, and moreover, there is occurrence of metallurgy bonding in the interface layer. Both Al and AlN/Al coatings have a good protective ability to NdFeB. Especially, the corrosion resistance of AlN/Al coated NdFeB is improved largely. AlN/Al and Al protective coatings not only do not deteriorate the magnetic properties of NdFeB, but contribute to their slight increase.

Diario de una infancia. Mariana

OpenAIRE

Casal, Silvana

2017-01-01

Resumen: Este artículo está centrado en el análisis del diario de infancia que una de mis entrevistadas, Mariana, escribió durante su niñez en la dictatorial República Argentina a partir del secuestro de su padre, producido en 1977, situación que dio pie al exilio familiar en México. Mariana nos permite entrar en su universo, conocer sus sentimientos y emociones, y acercarnos -a través de sus palabras plasmadas en las cartas que le escribe a su padre desaparecido- a su vida cotidiana y a trav...

El uso de las Redes Sociales en el Aula de Música en Secundaria y Bachillerato

OpenAIRE

Arnaiz Diego, Irene

2016-01-01

Las redes sociales han conseguido crear una nueva forma de comunicarse y relacionarse, gracias entre otros elementos al fenómeno de Internet, que ya es parte de nuestro día a día. Estos cambios permiten que nos planteemos nuevas formas y desafíos en el ámbito educativo. De la misma manera que las personas cambiamos en nuestra vida cotidiana, la educación necesita de ese mismo cambio, debe ser algo en constante renovación. Departamento de Didáctica de la Expresión Musical, Plástica y Corpor...

CtOS Enabler

OpenAIRE

Crespo Cepeda, Rodrigo; El Yamri El Khatibi, Meriem; Carrera García, Juan Manuel

2015-01-01

Las Smart Cities son, indudablemente, el futuro próximo de la tecnología al que nos acercamos cada día, lo que se puede observar en la abundancia de dispositivos móviles entre la población, que informatizan la vida cotidiana mediante el uso de la geolocalización y la información. Pretendemos unir estos dos ámbitos con CtOS Enabler para crear un estándar de uso que englobe todos los sistemas de Smart Cities y facilite a los desarrolladores de dicho software la creación de nuevas herramientas. ...

Perfiles ideológicos de consumo mediático de información política en Córdoba-Argentina

OpenAIRE

Paz García, A. Pamela; Centro de Investigaciones y Estudios en Cultura y Sociedad (CIECS, Argentina)

2014-01-01

Recuperando el papel de la ideología como componente clave de la cultura política y considerando el rol de los medios masivos de comunicación como agentes y referentes ideológicos, este trabajo sintetiza resultados parciales de una investigación mayor sobre las condiciones psico-socio-políticas que intervienen en la estructuración de las prácticas cotidianas de consumo de información política. Primero, se discuten las condiciones de selectividad ideológica de las audiencias, entendiendo al co...

La experiencia personal y la perspectiva antropológica en el aprendizaje del esquí nórdico. Realizar unos ejercicios en casa puede acelerar su aprendizaje

Directory of Open Access Journals (Sweden)

Feliu Funollet Queixalós

2011-12-01

Full Text Available La experiencia cotidiana en las pistas de esquí nórdico nos sugiere la existencia de tres elementos básicos que al empezar a esquiar dificultan su aprendizaje: la falta de conciencia corporal, la dificultad en controlar la acción del tobillo y la vinculación de la sensación de deslizarse con el miedo súbito. Creemos que si esos tres elementos pudieran entrenarse en casa o en los centros educativos, luego en las pistas de esquí el aprendizaje se realizaría de forma más rápida y segura.

Un símbolo para el departamento de psicología de la universidad nacional de colombia

OpenAIRE

Pérez González, Aristóbulo

2012-01-01

Buscar formas de identificación ha interesado al hombre siempre, desde cuando este experimento alguna confusión mental debido a la ambigüedad de los estímulos de su entorno físico o social. Entonces comenzó a nominar las cosas más cotidianas y familiares y entre estas a sus congéneres. Pero las identificaciones no se limitaron a las vocalizaciones, sino que el humano también apelo a eventos y a objetos que lo representaran, pues tales cosas ofrecían cualidades de interés para aquel. Entonces ...

Como aquí, allá; como nosotros, ellos: la internacionalización de la precariedad en el ejercicio ciudadano

Directory of Open Access Journals (Sweden)

Patricia Zamudio Grave

2007-05-01

Full Text Available La universalidad de los derechos humanos ha sido proclamada y reiterada por la comunidad de naciones, desde mediados del siglo veinte. Al mismo tiempo, procesos globalizadores parecen contradecir el derecho de todos los seres humanos a gozar de una vida digna, en todos los aspectos que ésta engloba, tanto en países desarrollados, como en aquéllos en proceso de desarrollo. Este trabajo reflexiona sobre la forma como la migración internacional conecta experiencias de precariedad en el ejercicio de derechos y sus consecuencias para la vida cotidiana de los migrantes.

De una singular leche alabastrina: el pulque en la literatura mexicana del siglo XIX

OpenAIRE

Olea Franco, Rafael

2010-01-01

En este ensayo se analiza el pulque como motivo en la literatura mexicana, empezando por dos de sus representaciones más extensas: las Leyendas mexicanas de José María Roa Bárcena y Los bandidos de Río Frío de Manuel Payno. De este modo se describe cómo el primer escritor se basa en el mito y la leyenda, mientras el segundo ensaya un exhaustivo registro costumbrista basado en la amplia presencia del pulque en la cultura cotidiana del siglo XIX. Al final, mediante el examen de un ensayo de Jos...

La proporción en la música

OpenAIRE

Cárdenas, Doris; Pérez, John Mario

2004-01-01

Presentamos parte de un trabajo de exploración en la didáctica de la matemática, en el cual desarrollamos un tema de gran importancia, como es la proporcionalidad, desde otras áreas, que si bien tienen este concepto como elemento fundamental, no han sido aprovechadas ni puestas en evidencia suficientemente dentro del campo de la enseñanza de la matemática, nos referimos a la música y al dibujo. También se toma la vida cotidiana como un campo de aplicación natural del concepto de proporcionali...

Energy harvesting from human passive power

OpenAIRE

Mateu Sáez, Maria Loreto

2009-01-01

Las tendencias en la tecnología actual permiten la reducción tanto en tamaño como en potencia consumida de los sistemas digitales complejos. Esta disminución en el tamaño y el consumo da lugar al concepto de dispositivos portátiles que se integren en la vida pertenencias personales y cotidianas como ropa, relojes, gafas, etc. La fuente de alimentación es un factor limitante en la movilidad de los dispositivos portátiles que se ve reducida por la duración de la batería. Además, ...

Teoría de los rasgos: contribución a la teoría del comportamiento del empresario

OpenAIRE

Gutiérrez Roa, Manuel

2011-01-01

El autor propone un nuevo punto de vista que relaciona la sicología con la Administración de Empresas. Se da una nueva explicación sobre el comportamiento del empresario mediante la formulación de hipótesis basadas en las teorías del comportamiento y en los hechos y actitudes que caracterizan al industrial en su actividad cotidiana. Las hipótesis son: - El empresario tiene una formación valorativa fruto de un proceso de interiorización y maduración del yo, a partir de una formación temprana e...

Kilómetro por hora, ji cuadrado, días-hormiga: temas dimensionales, métricos y algebraicos en las tareas de redacción, edición y traducción

OpenAIRE

José A. Tapia Granados

2004-01-01

Este trabajo comenta algunos aspectos básicos de teoría métrica, análisis dimensional y álgebra relativos a las magnitudes y cantidades de uso habitual en la vida cotidiana y en todos los campos de las ciencias naturales y sociales. Se trata de aspectos muy generales, cuyo conocimiento parece necesario para todos los implicados en la redacción de textos en castellano. El artículo presta especial atención a algunos problemas que surgen al traducir del inglés, explica las ambigüedades matemátic...

Al-Si/Al2O3 in situ composite prepared by displacement reaction of CuO/Al system

Directory of Open Access Journals (Sweden)

Zhang Jing

2010-02-01

Full Text Available Al2O3 particle-reinforced ZL109 composite was prepared by in situ reaction between CuO and Al. The microstructure was observed by means of OM, SEM and TEM. The Al2O3 particles in sub-micron sizes distribute uniformly in the matrix, and the Cu displaced from the in situ reaction forms net-like alloy phases with other alloy elements. The hardness and the tensile strength of the composites at room temperature have a slight increase as compared to that of the matrix. However, the tensile strength at 350 ℃ has reached 90.23 MPa, or 16.92 MPa higher than that of the matrix. The mechanism of the reaction in the CuO/Al system was studied by using of differential scanning calorimetry(DSC and thermodynamic calculation. The reaction between CuO and Al involves two steps. First, CuO reacts with Al to form Cu2O and Al2O3 at the melting temperature of the matrix alloy, and second, Cu2O reacts with Al to form Cu and Al2O3 at a higher temperature. At ZL109 casting temperature of 750–780 ℃, the second step can also take place because of the effect of exothermic reaction of the first step.

AlGaN nanocolumns and AlGaN/GaN/AlGaN nanostructures grown by molecular beam epitaxy

Energy Technology Data Exchange (ETDEWEB)

Ristic, J.; Sanchez-Garcia, M.A.; Ulloa, J.M.; Calleja, E. [Departamento de Ingenieria Electronica, ETSI Telecomunicacion, Universidad Politecnica de Madrid, Ciudad Universitaria, 28040 Madrid (Spain); Sanchez-Paramo, J.; Calleja, J.M. [Departamento de Fisica de Materiales, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Jahn, U.; Trampert, A.; Ploog, K.H. [Paul-Drude-Institut fuer Festkoerperelektronik, Hausvogteiplatz 5-7, 10117 Berlin (Germany)

2002-12-01

This work reports on the characterization of hexagonal, single crystal AlGaN nanocolumns with diameters in the range of 30 to 100 nm grown by molecular beam epitaxy on Si(111) substrates. The change of the flux ratio between the Al and the total III-element controls the alloy composition. The Al composition trend versus the Al flux is consistent both with the E{sub 2} phonon energy values measured by inelastic light scattering and the luminescence emission peaks position. High quality low dimensional AlGaN/GaN/AlGaN heterostructures with five GaN quantum discs, 2 and 4 nm thick, embedded into the AlGaN columns, were designed in order to study the quantum confinement effects. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

KONSEPSI AL-QURAN DAN AL-HADITS TENTANG OPERASIONAL BANK SYARIAH

Directory of Open Access Journals (Sweden)

Muhammad Ardy Zaini

2015-01-01

Full Text Available Islam hadir dengan beberapa tujuan, diantaranya adalah terciptanya khoirul ummah dan rahmatan lil’alamin dengan al-Qur’an dan al-Hadits sebagai penuntun umat Islam demi tercapainya tujuan tersebut. Sebagai pedoman hidup, al-Qur’an dan al-Hadits memberikan berbagai petunjuk tentang keteraturan dan permasalahan hidup, termasuk didalamnya mengenai perbankan yang telah memenuhi hampir separuh sisi-sisi kehidupan manusia. Untuk memaksimal ajaran syariah secara kaffah, maka nilai-nilai yang terdapat dalam al-Quran harus mampu diturunkan pada tataran praktis. Salah satu usaha dan langkah dalam rangka menemukan formula perbankan masa depan, al-Quran dan Hadits memiliki konsepsi dalam kegiatan operasional Bank Syariah. Hal ini dilakukan untuk membentuk sikap mental atau watak yang terjabarkan dalam pola berpikir, cara berbicara, dan etika bertingkah laku, sebagai ekspresi jiwa dari manusia yang beriman dan bertakwa kepada Allah Swt. Agar umat Islam mampu menjadi umat yang unggul (khayr ummah.

Fabrication of AlN-TiC/Al composites by gas injection processing

Institute of Scientific and Technical Information of China (English)

YU Huashun; CHEN Hongmei; MA Rendian; MIN Guanghui

2006-01-01

The fabrication of AlN-TiC/Al composites by carbon-and nitrogen-containing gas injection into Al-Mg-Ti melts was studied. It was shown that AlN and TiC particles could be formed by the in situ reaction of mixture gas (N2+C2H2+NH3) with Al-Mg-Ti melts. The condition for the formation of AlN was that the treatment temperature must be higher than 1373 K, and the amounts of AlN and TiC increased with the increase of the treatment temperature and the gas injection time.It was considered that AlN was formed by the direct reaction of Al with nitrogen-containing gas at the interface of the gas bubble and the melt. However, the mechanism of TiC formation is a combination mechanism of solution-precipitation and solid-liquid reaction.

La mappa del tesoro per l'auto autonoma

Directory of Open Access Journals (Sweden)

Massimiliano Arcieri

2015-06-01

Full Text Available As cartographers, we have long dreamt of creating the perfect map – one that precisely recreates the territory it seeks to represent. But, as many in the field will attest, at the heart of that endeavor has lay a great paradox: the closer to reality a map becomes, the less useful it tends to be, especially in today´s complex and crowded world.Maps have historically been abstractions of reality by necessity as people need not know every inch of the territory to get from A to B. And besides, there are limits to how much information the human brain can handle.But what if map data is not only designed for direct consumption by people but also to be read by machines capable of comprehending vast quantities of information? When we build maps that need to be understood only by software then the paradox falls away: one can indeed have a map which is close to 1:1 scale and at the same time useful to a machine such as a self-driving vehicle.HERE is working on such maps of the future through a combination of modern technology and traditional mapmaking expertise.At the forefront of its mapmaking is a global, highly trained team of geographic analysts, supported by mappers from the community, which contribute edits to the map via HERE’s Map Creator program. Beyond that, HERE is also deploying the industry’s most modern mapmaking technology too in the form of LIDAR data capture vehicles, which help HERE build very detailed 3D maps. Itis these high definition maps – which HERE calls the HD Map – that will be the foundation for autonomous driving. It is these maps that also move us closer to the notion of the ‘perfect map’.

La mappa del tesoro per l'auto autonoma

Directory of Open Access Journals (Sweden)

Massimiliano Arcieri

2015-06-01

is these high definition maps – which HERE calls the HD Map – that will be the foundation for autonomous driving. It is these maps that also move us closer to the notion of the ‘perfect map’.

The formation of AlB2 in an Al-B master alloy

International Nuclear Information System (INIS)

Wang Xiaoming

2005-01-01

The formation of borides in an Al-3 wt.%B master alloy, produced via chemical reactions of KBF 4 and aluminium has been investigated. The chemical reactions produce boron, which dissolves into molten aluminium and subsequently forms aluminium borides. Backscattered electron imaging (BEI) of the Al-3 wt.%B master alloy under a scanning electron microscope (SEM) revealed the presence of two types of phases that contain different levels of boron. Combined with X-ray diffraction (XRD) results, the two types of phases are identified as AlB 2 on AlB 12 . This gives a direct evidence for a peritectic reaction of AlB 12 and aluminium, which produces AlB 2 . The thermodynamic properties of the reactions that may be involved are examined, and the presence of AlB 12 phase in the master alloy explained. The observed microstructure is explained according to the peritectic reaction in an Al-B phase diagram. The stability of AlB 2 and AlB 12 at lower temperature than 975 deg. C is clarified

Construction and evaluation of multi-component Zn-Al based bearing alloys (Zn-Al-Si, Zn-Al-Cu)

International Nuclear Information System (INIS)

Shahmiri, M.; Shahin, K.

2001-01-01

Zn-Al based alloys, with excellent mechanical properties, are finding increasing applications in various industries, especially bearing and bushing fields. Observed dimensional instabilities, in their multicomponent systems, (e. g. Zn-Al-Si and, Zn-Al Si-Cu), is believed to be as the result of some kinds of phase transformation, due to the temperature variations, while in service. Profound understanding of the phase transformations due to the temperature variation, requires detailed evaluations of the isothermal sections of the multi-components phase diagrams of Zn-Al-Si and, Zn-Al-Si-Cu alloy systems. In the present article, the isothermal sections of the aforementioned ternary and quaternary systems in the solid state regions have been investigated and observed phase transitions have been critically evaluated

The Existence of a Designer Al=Al Double Bond in the LiAl2 H4- Cluster Formed by Electronic Transmutation.

Science.gov (United States)

Lundell, Katie A; Zhang, Xinxing; Boldyrev, Alexander I; Bowen, Kit H

2017-12-22

The Al=Al double bond is elusive in chemistry. Herein we report the results obtained via combined photoelectron spectroscopy and ab initio studies of the LiAl 2 H 4 - cluster that confirm the formation of a conventional Al=Al double bond. Comprehensive searches for the most stable structures of the LiAl 2 H 4 - cluster have shown that the global minimum isomer I possesses a geometric structure which resembles that of Si 2 H 4 , demonstrating a successful example of the transmutation of Al atoms into Si atoms by electron donation. Theoretical simulations of the photoelectron spectrum discovered the coexistence of two isomers in the ion beam, including the one with the Al=Al double bond. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Characterization of N-polar AlN in GaN/AlN/(Al,Ga)N heterostructures grown by metal-organic chemical vapor deposition

Science.gov (United States)

Li, Haoran; Mazumder, Baishakhi; Bonef, Bastien; Keller, Stacia; Wienecke, Steven; Speck, James S.; Denbaars, Steven P.; Mishra, Umesh K.

2017-11-01

In GaN/(Al,Ga)N high-electron-mobility transistors (HEMT), AlN interlayer between GaN channel and AlGaN barrier suppresses alloy scattering and significantly improves the electron mobility of the two-dimensional electron gas. While high concentrations of gallium were previously observed in Al-polar AlN interlayers grown by metal-organic chemical vapor deposition, the N-polar AlN (Al x Ga1-x N) films examined by atom probe tomography in this study exhibited aluminum compositions (x) equal to or higher than 95% over a wide range of growth conditions. The also investigated AlN interlayer in a N-polar GaN/AlN/AlGaN/ S.I. GaN HEMT structure possessed a similarly high x content.

KRITIK ATAS KRITIK EPISTEMOLOGI TAFSIR M. ABIED AL JABIRI: Studi Kritis atas Madkhal ila al Quran al Karim

Directory of Open Access Journals (Sweden)

Ahmad Fawaid

2015-12-01

Full Text Available This paper critically views the epistemology of Muhammad Abid al Jabiri’s interpretation in his book, Madkhal ila al Quran al Karim. His latest work is projected to make the Quran relevant to mankind today and with certainly critiquing classical Quranic studies that have been constructed by previous scholars. Starting from Arab criticism, which is expected to synergize the gap between Turath and modernity, al Jabiri tried out his theory in the realm of Quranic studies oriented to maintain its originality and interpretation from sectarian influence. Focusing on al Jabiri’s review on the Quran, this paper examines and associates some of the problems with the epistemology of critique in Arab reasoning. Finally, it is inferred that the epistemologic offer of al Jabiri used in Turath is not fully applicable in Quranic studies for several reasons. First, the Quranic studies existed within the chain of sanad in its formation. Secondly, at the application stage, al Jabri often overlooked the sanad and narrations from the companions.

Tolerância à dor no infarto do miocárdio Tolerancia al dolor en infarto del miocárdio Pain tolerance during myocardium infarction

Directory of Open Access Journals (Sweden)

Fernanda Carneiro Mussi

2010-01-01

Full Text Available OBJETIVO: Analisar a tolerância à dor como sintoma prodrômico do infarto do miocárdio na perspectiva dos gêneros masculino e feminino em pacientes que vivenciaram esse evento cardiovascular. MÉTODOS: Estudo exploratório de natureza quanti-qualitativa. Entrevistou-se 43 mulheres e 54 homens em hospital público. Os dados sóciodemográficos foram analisados em percentuais e os qualitativos com base na análise de conteúdo e da categoria gênero. RESULTADOS: A mediana de idade para homens foi 55,3 e mulheres de 61,5 anos. Predominou para os gêneros a baixa escolaridade e inatividade profissional. Os homens tinham renda familiar maior e viviam mais em companhia de alguém. Evidenciou-se que homens e mulheres demonstraram igualmente enfrentamento e resistência à dor, visando manter o controle da própria existência e reproduzindo construções sociais sobre o masculino e o feminino em suas vidas cotidianas. CONCLUSÃO: O desafio profissional é atuar no plano simbólico dos gêneros para reduzir o retardo na decisão de buscar atenção médica e possibilitar os benefícios imediatos das terapias de reperfusão coronária.OBJETIVO: Analizar la tolerancia al dolor como síntoma prodrómico del infarto del miocardio en la perspectiva de los géneros masculino y femenino en pacientes que experimentaron ese evento cardiovascular. MÉTODOS: Estudio exploratorio de naturaleza cuantitativa cualitativa. Se entrevistaron 43 mujeres y 54 hombres en un hospital público. Los datos sociodemográficos fueron analizados en porcentajes y los cualitativos con base en el análisis de contenido y de la categoría género. RESULTADOS: El promedio de edad para hombres fue 55,3 y mujeres de 61,5 años. Predominó para los dos géneros la baja escolaridad e inactividad profesional. Los hombres tenían renta familiar mayor y vivían más en compañía de alguien. Se evidenció que los hombres y mujeres demostraron igualmente enfrentamiento y resistencia al

TERRITORIALIDAD Y REIVINDICACIÓN SOCIAL: REFLEXIONES EN TORNO AL BARRIO DE LA PROSPERITAT/BARCELONA DESDE LA PERSPECTIVA DEL ADULTO MAYOR

Directory of Open Access Journals (Sweden)

Erika Tatiana Ayala García

2015-06-01

Full Text Available Este articulo reflexiona en torno al significado e impacto que tienen los espacios publicos en la vida cotidiana de los adultos mayores de 65 afios, residentes del barrio de La Prosperitat en Barcelona. Se desarrolla a partir de una metodología cualitati- va, que identifica las diferentes percepciones y opiniones en relaci6n a los espacios físicos y vivenciales. Los participantes lo describen como un barrio con una gran cohesión social y un alto sentido de lugar, que se transmite de generación en gene- ración, alimentado por reivindicaciones vecinales que buscan mejorar la calidad de vida de los habitantes. Como conclusión, se resalta la necesidad de generar investi- gaciones interdisciplinares que estudien la relación del ser humano con su entorno habitado, y generen así propuestas arquitectónicas, urbanas y sociales más acordes con la realidad. AbstractThis paper focuses on the impact and the significance, people older tan 65 years old have in relation with public spaces, in La Prosperitat neighborhood (Barcelona. A qualitative methodology to identify the different perceptions and opinions related to the physical and existing spaces. La Prosperitat neighborhood residents describe it as a big social cohesiveness and a high sense of belonging community, which is transmitted from generation to generation, concerned about how to improve the qua- lity of life of its inhabitants. As a conclusion, it is highlighted the need to generate interdisciplinary researches that aims to study the relation of the human being with his inhabited environment, and generate architectural, urban and social proposals more according to the reality.

Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

International Nuclear Information System (INIS)

Li, Shuo; Bhushan, Bharat

2016-01-01

Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

Energy Technology Data Exchange (ETDEWEB)

Li, Shuo [School of Materials Science and Technology, China University of Geosciences (Beijing), 29 Xueyuan Road, Haidian Distract, Beijing 100083 (China); Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States); Bhushan, Bharat, E-mail: bhushan.2@osu.edu [Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States)

2016-08-15

Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

Dakwah Kultural Bayt al-Qur’an al-Akbar Ukiran Kayu Khas Melayu Palembang

Directory of Open Access Journals (Sweden)

Reza Pahlevi

2016-07-01

Full Text Available Penelitian ini berusaha mengungkap berbagai fenomena yang menggambarkan serangkaian kegiatan dakwah kultural Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang. Sehingga dapat diperoleh sejumlah informasi mengenai berbagai upaya penerapan program yang dimaksud. Penelitian ini dapat disimpulkan, pertama kontribusi Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang terhadap perkembangan metode dakwah kultural adalah dakwah melalui seni. Kedua, Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang sebagai tempat Wisata Religi yang sangat signifikan.   This research tries to reveal the various phenomenon that describe a series of cultural propaganda activities Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang. In order to obtain some informations about the efforts of the implementation of the program in question. It can be concluded, the first contribution of Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang on the development of methods of cultural propaganda is propaganda through art. Second Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang as a very significant Religious Tourism.

Optical phonon scattering on electronic mobility in Al2O3/AlGaN/AlN/GaN heterostructures

Science.gov (United States)

Zhou, X. J.; Qu, Y.; Ban, S. L.; Wang, Z. P.

2017-12-01

Considering the built-in electric fields and the two-mode property of transverse optical phonons in AlGaN material, the electronic eigen-energies and wave functions are obtained by solving Schrödinger equation with the finite difference method. The dispersion relations and potentials of the optical phonons are given by the transfer matrix method. The mobility of the two dimensional electron gas influenced by the optical phonons in Al2O3/AlGaN/AlN/GaN heterostructures is investigated based on the theory of Lei-Ting force balance equation. It is found that the scattering from the half-space phonons is the main factor affecting the electronic mobility, and the influence of the other phonons can be ignored. The results show that the mobility decreases with increasing the thicknesses of Al2O3 and AlN layers, but there is no definite relationship between the mobility and the thickness of AlGaN barrier. The mobility is obviously reduced by increasing Al component in AlGaN crystal to show that the effect of ternary mixed crystals is important. It is also found that the mobility increases first and then decreases as the increment of the fixed charges, but decreases always with increasing temperature. The heterostructures constructed here can be good candidates as metal-oxide-semiconductor high-electron-mobility-transistors since they have higher electronic mobility due to the influence from interface phonons weakened by the AlN interlayer.

Al2O3 adherence on CoCrAl alloys

International Nuclear Information System (INIS)

Kingsley, L.M.

1980-04-01

Adherence of protective oxides on NiCrAl and CoCrAl superalloys has been promoted by a dispersion of a highly oxygen reactive element or its oxide being produced within the protection system. Two aspects of this subject are investigated here: the use of Al 2 O 3 as both the dispersion and protective oxide; and the production of an HfO 2 dispersion while simultaneously aluminizing the alloy. It was found that an Al 2 O 3 dispersion will act to promote the adherence of an external scale of Al 2 O 3 to a degree comparable to previously tested dispersions and an HfO 2 dispersion comparable to that produced by a Rhines pack treatment is produced during aluminization

Diseño de moduladores Delta-Sigma en tecnología CMOS-VLSI. Aplicación al desarrollo de circuitos de interfaz para sensores capacitivos

OpenAIRE

Gómez Cama, José María

2000-01-01

La tecnología microelectrónica esta entrando a formar parte de la vida cotidiana. Así, además del ordenador PC, tanto en los vehículos, como en las viviendas es difícil encontrar equipos o subsistemas eléctricos que no incluyan algún tipo de circuito integrado para su control.Aspectos como la automatización de viviendas y edificios se empieza a considerar una cuestión clave para la industria informática. Los cuales se basan en buses de campo. Estos precisan de sensores que le informen del est...

Tracing Al Shabaab’s Decision to Cooperate with Al Qaeda in Somalia (2008

Directory of Open Access Journals (Sweden)

Adlini Ilma Ghaisany Sjah

2014-02-01

Full Text Available 'Al Shabaab, a Somali insurgent with predominantly nationalistic causes (alongside transnational [global Jihad] and Islamic goals made the choice to fight on behalf of Al Qaeda in 2008. The decision to do so contrasted with Al Shabaab’s previous behaviour of actively denying cooperation and distancing itself from Al Qaeda. This study aims to uncover factors that contributed to Al Shabaab’s decision through the use of process-tracing. The results show that Al Shabaab’s declaration of cooperation with Al Qaeda in August 2008 was brought about by a series of events that traced back to four factors: public reactions to the implementation of a Salafi ideology, the shift to a radical leadership, Al Shabaab’s inability to maintain stability in areas under its control and its increasing attacks by Al Shabaab on the Somali public. Al Shabaab pursued cooperation with Al Qaeda after realizing that their nationalistic preference was no longer achievable in the near future.' ' '

Las cosas que se llevan en la mochila: El poder en comunidades de okupación rural españolas

Directory of Open Access Journals (Sweden)

María Teresa Ramírez

2013-07-01

Full Text Available En este texto presento algunas reflexiones sobre los discursos que buscan generar una alternativa al modelohegemónico propuesto por el neoliberalismo. Para esto, me centro en el discurso sobre el poder de un grupo depersonas vinculadas al movimiento de okupación rural español. Comienzo desde las motivaciones que tienen laspersonas de este grupo para buscar una forma de vida cotidiana alternativa a la hegemónica, y las dificultades,centradas en la propia comunidad, con las que se han encontrado para lograrlo. Desde aquí, expongo las concepcionesque tienen sobre el poder, utilizando como marco interpretativo la teoría de Foucault. Luego me centroen la forma en que este grupo busca superar estas dificultades, principalmente vinculada al “reconocimientoindividual” de las emociones. Sobre este punto termino con algunas reflexiones críticas ligadas a conceptoscomo tecnologías del yo y subjetivación.

All About ALS

Science.gov (United States)

... Subscribe August 2015 Print this issue All About ALS Understanding a Devastating Disorder En español Send us ... Sports Concussions Wise Choices How Can I Help ALS Research? If you have ALS, join the National ...

Atomistic simulations of diffusion mechanisms in off-stoichiometric Al-rich Ni3Al

International Nuclear Information System (INIS)

Duan, Jinsong

2007-01-01

This paper presents dynamics simulation results of diffusion in off-stoichiometric Al-rich Ni 3 Al (Ni 73 Al 27 ) at temperature ranging from 1300 to 1550 K. The interatomic forces are described by the Finnis-Sinclair type N-body potentials. Particular attention is devoted to the effect of the extra 2% of Al atoms sitting on the Ni sublattice as antisite point defects (Al Ni ) on diffusion. Simulation results show that Ni atoms mainly diffuse through the Ni sublattice at the temperatures investigated. Al atoms diffuse via both the intrasublattice and antistructure bridge (ASB) mechanisms. The contribution to Al diffusion from the ASB mechanism decreases at the lower temperature (T Ni ) enhances both Al and Ni diffusion in Ni 73 Al 27 . The Ni-Al coupled diffusion effect is observed and understood at the atomic level for the first time

Methodology and Characteristics of Zad al-masir fi ‘ilm al-tafsirby AllamaIbn al-Jawzī (Urdu

Directory of Open Access Journals (Sweden)

Dr. Muhammad Riaz al Azhari

2017-01-01

Full Text Available This article describes the methodology and characteristics of Zad al-masir fi ‘ilm al-tafsir. This is one the finest work of AllamaIbn al-Jawzī, a 6th century prominent Interpreter. Several editions of this Tafsir have been published. However, the edition of dar al-kitab al-‘arbi, Beirut published in four volumes is selected for this study. This exegesis is based on conventional narrations, authentic quotations from the Islamic Scholars and lingual & grammatical discussions. As a witness, causes of verses (asbabal-Nuz┴l,Makki and MadaniSurah’s (chapters, the abrogating and abrogated verses (al-nasikhwal-mans┴kh and Islamic jurisprudence have been discussed in it where needed. The quality of this translation which is admirable is that mostly authentic Ahadith from original sources, and references to well known basic books in relevant discussions have been described. `

Phenotypic and genotypic studies of ALS cases in ALS-SMA families.

Science.gov (United States)

Corcia, Philippe; Vourc'h, Patrick; Blasco, Helene; Couratier, Philippe; Dangoumau, Audrey; Bellance, Remi; Desnuelle, Claude; Viader, Fausto; Pautot, Vivien; Millecamps, Stephanie; Bakkouche, Salah; Salachas, FranÇois; Andres, Christian R; Meininger, Vincent; Camu, William

2018-03-01

Amyotrophic lateral sclerosis (ALS) and spinal muscular atrophy (SMA) are the most frequent motor neuron disorders in adulthood and infancy, respectively. There is a growing literature supporting common pathophysiological patterns between those disorders. One important clinical issue for that is the co-occurrence of both diseases within a family. To collect families in which ALS and SMA patients co-exist and describe the phenotype and the genotype of ALS patients. Nine families with co-occurrence of SMA and ALS have been gathered over the last 15 years. Epidemiological, phenotype and genetic status were collected. Out of the nine families, six corresponded to the criteria of familial ALS (FALS). Clinical data were available for 11 patients out of the 15 ALS cases. Mean age of onset was 58.5 years, site of onset was lower limbs in nine cases (81.8%), median duration was 22 months. Four ALS patients carried a mutation: three mutations in SOD1 gene (G147N in two cases and one with E121G) and one repeat expansion in the C9ORF72 gene. Three patients had abnormal SMN1 copy numbers. While the high proportion of familial history of ALS cases in these ALS-SMA pedigrees could have suggested that these familial clusters of the two most frequent MND rely on a genetic background, we failed to exclude that this occurred by chance.

Eutectic microstructures of Al-ThA13 and Al-UA14 alloys

International Nuclear Information System (INIS)

Vieira, R.R.; Ambrozio Filho, F.

1990-01-01

This paper deals on the microstructures of systems Al-ThAl3 and Al-UAL4, which are composed by a non faceted phase (aluminium) and an intermetallic phase (ThAl3 or UAL4) which is normally faceted phase. (C.M.)

Interface reactions in the Al-Si-SiC and Mg-Al-Al{sub 2}O{sub 3} composite systems

Energy Technology Data Exchange (ETDEWEB)

Johnson, P.K. [Commission of the European Communities, Petten (Netherlands). Inst. for Advanced Materials; Fazal-Ur-Rehman [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials; Fox, S. [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials; Flower, H.M. [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials; West, D.R.F.

1995-12-31

Structural and compositional observations are reported on the influence of the interfaces on the mechanisms and kinetics of liquid metal-ceramic reactions in Al-SiC, Al-Si-SiC, Mg-Al{sub 2}O{sub 3} and Mg-Al-Al{sub 2}O{sub 3} composites. The aluminium based materials contained up to 20 vol% SiC in particulate form, and were produced by a spray casting process; subsequently the interface reactions were studied in samples heated to temperatures up to 1100 C. The reaction product was Al{sub 4}C{sub 3} in both Al-SiC and Al-Si-SiC composites. The influence of the crystallography and topology of the SiC particle surfaces on the nucleation of the Al{sub 4}C{sub 3} has been demonstrated; surface asperities play an important role. Growth of nuclei proceeds to form continuous reaction product layers which control the subsequent kinetics. The magnesium based composites contained 5 vol% Al{sub 2}O{sub 3} fibres (3 {mu}m in diameter), and were produced by a liquid infiltration process. SD Safimax fibres with relatively low and high porosity, and also RF Saffil fibres, with a silica binder, were investigated. Fibre porosity plays a major role in accelerating the penetration of Mg into the fibres with reaction to form MgO. Silica binder on the fibre surface transforms to MgO. The reaction rate was reduced by the presence of aluminium in the matrix. The factors controlling the reactions in the aluminium and magnesium based composites are compared. (orig.)

KONSTRUKSI FIQH BUKHARI DALAM KITAB AL-JAMI’ AL-SHAHIH

Directory of Open Access Journals (Sweden)

Abdul Sattar

2011-06-01

Popularitas Imam Bukhari sebagai penyusun kitab Hadits memiliki posisi yang tinggi di kalangan masyarakat muslim. Kitab Al-Jami ‘al-Shahih karya Imam  Bukhari dianggap sebagai koleksi hadits terbaik setelah Quran. Namun, tidak ada banyak informasi tentang kemampuannya di bidang Hukum Islam (fiqh. Ada beberapa pertanyaan yang dapat diajukan dalam hal tersebut;  pertama, apakah pemikiran Imam Bukhari dipengaruh salah satu dari empat fuqaha Sunni saat menulis al-Jami ‘al-Shahih?. Kedua, apa yang diupayakan Imam Bukhari untuk mengartikulasikan pemikirannya tentang hukum Islam? Dengan menggunakan pendekatan eksploratif, verifikatif dan hermenetical, artikel ini akan mengungkapkan bahwa Imam Bukhari tidak berada di bawah pengaruh madhab tertentu dalam mengartikulasikan pemikirannya tentang hukum Islam. Dia mengartikulasikan pandangannya dengan cara yang unik dan execelent berdasarkan kapasitasnya sebagai muhaddits.

La "historia de los omeyas de al-Andalus" en los Masalik al-Absar

OpenAIRE

Molina, Luis

2005-01-01

[ES]Los Masalik al-absar de Ibn Fadl Allah al-`Umari incluyen un breve resumen de la Historia de los omeyas de al-Andalus. En este trabajo se analizan las relaciones textuales entre ese pasaje y el Muqtabis de Ibn Hayyan, crónica que resulta ser la fuente casi única utilizada por al-`Umari para redactar ese capítulo. [EN]The Masalik al-absar by Ibn Fadl Allah al-`Umari contains a brief summary of the Umayyad history in al-Andalus. In this article, the textual relationship between this p...

Apropiación de las TIC en comunidades vulnerables: el caso de Medellín Digital

Directory of Open Access Journals (Sweden)

Gloria María Álvarez Cadavid

2011-04-01

Full Text Available Este artículo presenta los resultados, aún preliminares, de una de las fases del proyecto "Diseño de una propuesta comunicativopedagógica de formación en los usos y apropiación de las tecnologías de la información y la comunicación (TIC digitales para la vida cotidiana y el ámbito educativo en comunidades vulnerables", realizado por el grupo de investigación Educación en Ambientes Virtuales de la Universidad Pontificia Bolivariana. El propósito de dicha fase es conocer y caracterizar las prácticas concretas frente al uso de las TIC de actores de diferentes grupos (emprendedores y empresarios, estudiantes y comunidad en general, beneficiarios del Programa Medellín Digital. Siguiendo los principios de la teoría fundamentada, se realizaron indagaciones de tipo cualitativo, mediante entrevista abierta, sobre conectividad, lugares de acceso y rutinas de uso de la tecnología, entre otros aspectos. Los análisis iniciales ya señalan temas y relaciones clave para comprender el proceso de apropiación tecnológica de acuerdo con los actores y sus prácticas cotidianas.

Cryptanalysis of Lin et al.'s Efficient Block-Cipher-Based Hash Function

NARCIS (Netherlands)

Liu, Bozhong; Gong, Zheng; Chen, Xiaohong; Qiu, Weidong; Zheng, Dong

2010-01-01

Hash functions are widely used in authentication. In this paper, the security of Lin et al.'s efficient block-cipher-based hash function is reviewed. By using Joux's multicollisions and Kelsey et al.'s expandable message techniques, we find the scheme is vulnerable to collision, preimage and second

From Kitāb al-ḥadā’iq to Kitāb al-dawā’ir: Reconsidering Ibn al-Sīd al-Batalyawsī’s Philosophical Treatise

Directory of Open Access Journals (Sweden)

Eliyahu, Ayala

2015-06-01

Full Text Available The philosophical treatise known as Kitāb al-ḥadā’iq is generally ascribed to the 12th century Andalusian author Ibn al-Sīd al-Batalyawsī, although this attribution is sometimes contested. This paper offers a new interpretation of the title, textual history, authorship, sources, and literary genre of this treatise, on the basis of new textual evidence, a reexamination of known evidence, and a comparison between the treatise and Batalyawsī’s works. The conclusions of this study are first, that Kitāb al-ḥadā’iq was not the treatise’s original title, and therefore it should be renamed Kitāb al-dawā’ir; second, that Kitāb al-dawā’ir was originally part of (one of the versions of Batalyawsī’s Kitāb al-masā’il; and third, that the textual and stylistic similarities between this treatise and Batalyawsī’s other works prove the authenticity of the treatise’s attribution to Batalyawsī. In addition, new findings regarding Batalyawsī’s use of formulas from the Rasā’il Ikhwān al-Safā, in Kitāb al-dawā’ir and Kitāb al-masā’il provide further evidence for the deep impact of the Ikhwān on Batalyawsī’s thought, as well as for the close connection between Kitāb al-dawā’ir and Kitāb al-masā’il. This connection is further highlighted according to the attribution of both treatises to the genre of questions and answers in Arabic literature. The evidence gathered in this paper supports the claim that Batalyawsī’s Kitāb al-dawā’ir should be seen as an integral part of his literary oeuvre, as well as of Andalusian philosophical literature in general.Generalmente el tratado filosófico conocido como Kitāb al-ḥadā’iq se asocia al autor andalusí del siglo XII Ibn al-Sid al-Batalyawsī, aunque esta atribución ha sido discutida en ocasiones. Este artículo ofrece una nueva interpretación del título, la historia del texto, la autoría, las fuentes e incluso del género literario al que se

Theory and X-ray Absorption Spectroscopy for Aluminum Coordination Complexes – Al K-Edge Studies of Charge and Bonding in (BDI)Al, (BDI)AlR2, and (BDI)AlX2 Complexes.

Science.gov (United States)

Altman, Alison B; Pemmaraju, C D; Camp, Clément; Arnold, John; Minasian, Stefan G; Prendergast, David; Shuh, David K; Tyliszczak, Tolek

2015-08-19

Polarized aluminum K-edge X-ray absorption near edge structure (XANES) spectroscopy and first-principles calculations were used to probe electronic structure in a series of (BDI)Al, (BDI)AlX2, and (BDI)AlR2 coordination compounds (X = F, Cl, I; R = H, Me; BDI = 2,6-diisopropylphenyl-β-diketiminate). Spectral interpretations were guided by examination of the calculated transition energies and polarization-dependent oscillator strengths, which agreed well with the XANES spectroscopy measurements. Pre-edge features were assigned to transitions associated with the Al 3p orbitals involved in metal-ligand bonding. Qualitative trends in Al 1s core energy and valence orbital occupation were established through a systematic comparison of excited states derived from Al 3p orbitals with similar symmetries in a molecular orbital framework. These trends suggested that the higher transition energies observed for (BDI)AlX2 systems with more electronegative X(1-) ligands could be ascribed to a decrease in electron density around the aluminum atom, which causes an increase in the attractive potential of the Al nucleus and concomitant increase in the binding energy of the Al 1s core orbitals. For (BDI)Al and (BDI)AlH2 the experimental Al K-edge XANES spectra and spectra calculated using the eXcited electron and Core-Hole (XCH) approach had nearly identical energies for transitions to final state orbitals of similar composition and symmetry. These results implied that the charge distributions about the aluminum atoms in (BDI)Al and (BDI)AlH2 are similar relative to the (BDI)AlX2 and (BDI)AlMe2 compounds, despite having different formal oxidation states of +1 and +3, respectively. However, (BDI)Al was unique in that it exhibited a low-energy feature that was attributed to transitions into a low-lying p-orbital of b1 symmetry that is localized on Al and orthogonal to the (BDI)Al plane. The presence of this low-energy unoccupied molecular orbital on electron-rich (BDI)Al distinguishes

Seguimiento de enfermería a la madre y al recién nacido durante el puerperio: traspasando las barreras hospitalarias

Directory of Open Access Journals (Sweden)

ONAIDY ALINA BOHÓRQUEZ GAMBA

2009-12-01

Full Text Available Este artículo ofrece una visión global del estado del arte de cinco trabajos de grado en modalidad de pasantía, realizados por estudiantes de pregrado de la Universidad Nacional de Colombia, Facultad de Enfermería, entre 2004 y 2007, desarrollados en los servicios de puerperio de cuatro hospitales de Bogotá, dentro del proyecto " Seguimiento domiciliario a la madre y al recién nacido durante el puerperio" . Refiere la vinculación de madres en periodo de puerperio, sus neonatos, padres y familias como grupo de apoyo, a quienes les realizaron seguimiento mediante llamadas telefónicas y visitas domiciliarias, para identificar factores de riesgo y signos de alarma que les comprometieran la salud y la vida. Congruentes con los hallazgos en las valoraciones de enfermería y el seguimiento, los estudiantes y docentes ejecutaron acciones de promoción de la salud y prevención de la enfermedad, mediante sesiones educativas en espacios institucional y domiciliario, dirigidas a fortalecer e iniciar oportunamente cuidados de enfermería, promover la participación de la familia, motivar la consulta temprana y ofrecer apoyo en lactancia materna, estilos de vida saludable, fortalecimiento del vínculo afectivo madre-hijo-padre, respetando las prácticas culturales. Las intervenciones de cuidado ejecutadas por estudiantes y docentes fueron estrategias para participar en la disminución de las tasas de morbilidad y mortalidad materna y neonatal por causas evitables. Además los trabajos evidenciaron que el cuidado de enfermería sobrepasa los espacios hospitalarios y reviste importancia en escenarios de vida cotidiana como el hogar.

Thermodynamic properties of Al-Mn, Al-Cu, and Al-Fe-Cu melts and their relations to liquid and quasicrystal structure

International Nuclear Information System (INIS)

Zaitsev, A I; Zaitseva, N E; Shimko, R Yu; Arutyunyan, N A; Dunaev, S F; Kraposhin, V S; Lam, Ha Thanh

2008-01-01

Thermodynamic properties of molten Al-Mn, Al-Cu and Al-Fe-Cu alloys in a wide temperature range of 1123-1878 K and the whole range of concentrations have been studied using the integral effusion method and Knudsen mass spectrometry. Thermodynamic functions of melts were described by the associated solution model. The possibility of icosahedral quasicrystal (i-QC) precipitation from liquid Al-Mn and Al-Cu-Fe alloys was found to be a consequence of the existence in liquid associates (clusters). A geometric model is suggested for the structure of associates in liquid

Sintering Behavior of CNT Reinforced Al6061 and Al2124 Nanocomposites

Directory of Open Access Journals (Sweden)

Nouari Saheb

2014-01-01

Full Text Available Ball milling and spark plasma sintering were successfully used to produce carbon nanotube reinforced Al6061 and Al2124 nanocomposites which have potential applications in the fields of aerospace, automotive, electronics, and high precision instrumentation. Al2124 and Al6061 nanocomposite powders containing 0.5 to 2 wt.% CNTs prepared through sonication and wet ball milling were spark plasma sintered at 400, 450, and 500°C for 20 minutes under a pressure of 35 MPa. CNTs were better dispersed, and less agglomerated and had good adhesion to the matrix in composites containing 1 wt.% CNTs. The increase of CNT content to 2 wt.% led to the formation of CNT clusters which resulted in less uniform and homogenous composite powders. Almost full densification of Al6061 reinforced with CNTs was achieved at 500°C. Also, CNTs reinforced Al2124 nanocomposites reached very high densities at 500°C. Composites reinforced with 1 wt.% CNTs displayed better densification compared to composites containing 2 wt.% CNTs. The increase of CNTs content from 0.5 to 1 wt.% increased the hardness of the Al6061 and Al2124 alloys to maximum values. Further increase of CNTs content to 2 wt.% decreased the hardness to values lower than that of the monolithic alloys.

Tetragonal phase in Al-rich region of U-Fe-Al system

International Nuclear Information System (INIS)

Meshi, L.; Zenou, V.; Ezersky, V.; Munitz, A.; Talianker, M.

2005-01-01

A new ternary aluminide U 2 FeAl 20 with the approximate composition Al-4.2at% Fe-8.5at% U was observed in the Al-rich corner of the U-Al-Fe system. Transmission electron microscopy and electron microdiffraction technique were used for characterization of the structure of this phase. It has a tetragonal unit cell with the parameters a=12.4A and c=10.3A and can be described by the space group I4-bar 2m

Ilhaq al-Masa'il bi Nazairiha dan Penerapannya dalam Bahth al-Masa'il

Directory of Open Access Journals (Sweden)

Luthfi Hadi Aminuddin

2013-11-01

Full Text Available Abstract: Ilh}a>q al-Masa>’il bi Naz}a>iriha is one of the methods used by Nahdlatul Ulama in resisting the opinion based on (manhaji analytical concept of Islamic jurisprudence (the solution for complex social problems as the main purpose of Islamic shari’ah. As known that, up to now, ilh}a>q has been understood as a process of answering a new case by the way of equating to the old one which is written in the book called al-mu’tabarah. Such ilh}a>q has got many criticisms both from the definitions, procedures and its epistemogical footing. This paper is about to reveal how the NU clerics of Islam understand the concept of Ilh}a>q}, what its epistemological footing was and how the concept was applied in discussing many cases (bah}th al-masa>’il. Based on the writer’s study to several documents of decision results of NU that Ilh}a>q did not only simplify to equate the new cases with the old ones that have been freely discussed in the books of al-mu’tabarah, but both cases should have similar legal substance, that is, both should be under the decrees of laws of al-qawa> ‘id al-fiqhi>yah. Thus, Ilh}a>q is actually answering the problem by applying al-qawa>‘id al-fiqhi>yah, whereas the formulation al-qawa>‘id al-fiqhi>yah itself was set off from the examination of a number of furu>’ generated by qiya> s. This paper also found three variations of the implementation of Ilh}a>q in bah}th al-masa>’il. First, the application of Ilh}a>q was without mentioning al-qawa> ‘id al-fiqhi>yah which covered new cases (mulh}aq and the old case law that has been known in the books of fiqh (mulh}aq bih/attached to. Second, the application of Ilh}a>q was accompanied by mentioning mulh}aq bih and al-qawa> ‘id al-fiqhi>yah. Third, the application of Ilh}a>q, was only by the mentioning al-qawa> ‘id al-fiqhi>yah.

Nanoindentation studies of ex situ AlN/Al metal matrix nanocomposites

International Nuclear Information System (INIS)

Fale, Sandeep; Likhite, Ajay; Bhatt, Jatin

2014-01-01

Highlights: • Formation of in-situ phases nucleated on AlN particles strengthens the matrix. • Formation of in-situ phases increases with AlN content in nanocomposites. • Stronger in-situ phases results in increased hardness and modulus of elasticity. - Abstract: Nanocrystalline Aluminium nitride (AlN) powder is dispersed in different weight ratio in Aluminum matrix to fabricate metal matrix nanocomposite (MMNC) using ex situ melt metallurgy process. The synthesized Al–AlN nanocomposites are studied for phase analysis using high resolution scanning electron microscopy (FEG-SEM) and for hardness behavior using microindentation and nanoindentation tests. Quantitative analysis of the oxide phases is calculated from thermodynamic data and mass balance equation using elemental data obtained from energy dispersive spectroscopy (EDS) results. Role of oxide phases in association with AlN particles is investigated to understand the mechanical behavior of composites using nanoindentation tester. Load–displacement profile obtained from nanoindentation test reveals distribution of oxide phases along with AlN particle and their effect on indent penetration

Hostelería para fines específicos en el aula de E/LE

Directory of Open Access Journals (Sweden)

David Giménez Folqués

2011-01-01

Full Text Available Cuando un alumno extranjero se dispone a estudiar un nuevo idioma, tiene la esperanza de volver a su país sabiendo al menos desenvolverse en los ámbitos más esenciales: en una conversación cotidiana, en el banco, en una entrevista de trabajo o,por qué no, en un restaurante. Así pues, hemos seleccionado la Hostelería para fines específicos en el aula de E/LE como proyecto con el fin de auxiliar al alumno en este campo. Este objetivo lo llevamos a cabo mediante un enfoque por tareas, es decir,adquiriremos las herramientas necesarias antes de emprender la tarea que nos interesa:saber desenvolvernos en un restaurante. Para ello, hemos seleccionado los tiempos verbales y el vocabulario que hemos considerado esenciales para el desarrollo de nuestro objetivo.

Sol de invierno: aspectos emocionales del paciente renal crónico

Directory of Open Access Journals (Sweden)

Tânia Rudnicki

2006-01-01

Full Text Available El presente artículo discute las principales características emocionales asociadas a la forma como los pacientes con insuficiencia renal crónica se enfrentan al tratamiento de hemodiálisis. El proceso de adaptación que se plantea, elemento importante en las emociones de las personas, involucra como protagonistas principales al paciente y sus maneras particulares de defensa ante la enfermedad, así como el apoyo de los recursos médicos hospitalarios, el equipo humano que le sostiene y la familia como aristas importantes para evitar problemas de aislamiento en el paciente. Del equilibrio de este proceso de adaptación, se previenen, como en toda enfermedad crónica, problemas subyacentes a la autoestima del paciente, la imagen corporal que construye y dificultades centradas a sus relaciones cotidianas.

Isothermal cross-sections of Sr-Al-Ge and Ba-Al-Ge systems at 673 K

International Nuclear Information System (INIS)

Kutsenok, N.L.; Yanson, T.I.

1987-01-01

X-ray and microstructural analyses are used to study phase equilibria in Sr-Al-Ge and Ba-Al-Ge systems. Existence of SrAl 2 Ge 2 , Sr(Al, Ge) 2 Ba(Al, Ge) 2 , Sr 3 Al 2 Ge 2 , Ba 3 Al 2 Ge 2 ternary compounds is confirmed, a new BaGe 4 binary compound and also new ternary compounds of approximate composition Sr 57 Al 30 Ge 13 and Ba 20 Al 40 Ge 40 , which crystal structure is unknown, are detected. Aluminium solubility in SrAl 4 and BaAl 4 binary compounds (0.05 atomic fraction) is determined. Ba(Al, Ge) 2 compound homogeneity region is defined more exactly (aluminium content varies from 0.27 to 0.51 at. fractions)

Production of 26Al by spallation of Fe, Si, Al nuclei

International Nuclear Information System (INIS)

Paillard, P.

1977-01-01

Cross sections for 7 Be, 10 Be and 26 Al formation in Al, Si and Fe targets bombarded with 0.6 and 24GeV protons have been measured by using highly selective chemical separation and low level background counters. Results for 26 Al at 0.6GeV are in mb: 17.9 + or - 2.7 in Al, 12.5 + or - 2.5 in Si and 0.45 + or - 0.14 in Fe; at 24GeV 2.6 + or - 0.5mb in Fe. Results for 10 Be are not valid on account of experimental difficulties. It is deduced from these values of aluminium in cosmic ray propagation that 26 Al is not yet cosmic ray chronometer [fr

La Concertación de Deudores: Un fantasma de las negociaciones financieras, un olvido en su historia

Directory of Open Access Journals (Sweden)

Diana Tussie

2015-01-01

Full Text Available Este artículo rescata la historia de la deuda latinoamericana y los intentos de concertación que hubo en los años ochenta para reducir mancomunadamente el servicio de la misma. Se pone en perspectiva su fracaso como sus implicancias a largo plazo. Asimismo se contrasta la concertación de deudores con las coaliciones en el campo comercial. Si bien ninguna de ellas logra el cambio de reglas que dicen proponerse como meta, los resultados residen en los pagos laterales que sus miembros obtienen al introducir una amenaza en la mesa de negociación. A largo plazo dichos pagos laterales fortalecieron a los acreedores en la arquitectura global de las reestructuraciones de deuda con efectos que bien pueden hoy irradiarse a Europa. La presente colaboración hace alusión a la suscrita por Bresser-Pereira, Luiz Carlos, (2014, “El punto de inflexión en la crisis de la deuda: Brasil, el Tesoro estadounidense y el Banco Mundial”, en www.olafinanciera.unam.mx Número 17 (Enero – Abril 2014, en la sección Clásicos.

143 - 148_Makeri et al.

African Journals Online (AJOL)

USER

2015-06-01

Jun 1, 2015 ... Yuan et al., 2003), antimicrobial activity (Sundarrao et al., 1993; Betancur-Galvis et al., 1999; Takashi et al., 2006), anti-parasitic, anti-malarial activities (Alali et al., 1998; Jaramillo et al., 2000; Luna et al.,. 2005). This study evaluates the antibacterial activity of extract of stem –bark and leaf extracts of Annona.

Phase relationships in the Al-rich region of the Al-Cu-Er system

International Nuclear Information System (INIS)

Zhang Ligang; Masset, Patrick J.; Cao Fuyong; Meng Fangui; Liu Libin; Jin Zhanpeng

2011-01-01

Research highlights: → One ternary phase τ 1 -Al 8 Cu 4 Er in Al-rich region with a composition of 59.4-60.4 at.% Al, 32.2-33.8 at.% Cu, and 6.4-7.7 at.% Er is observed in both as-cast and annealed alloys. At 673 K, the binary Al 3 Er phase dissolves about 3.51 at.% Cu. → The calculated solidification paths (based on the CALPHAD method) of as-cast alloys are in agreement with the experimental results. → It can be found that the resultant thermodynamic database can be applied to case studies of as-cast alloys, showing that the literature thermodynamic description of the Al-Cu-Er system is reliable as a working basis for computer-assisted alloy design. - Abstract: The Al-rich region of the ternary Al-Cu-Er system is investigated using the method of X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy. Phase equilibria in the Al-rich region of the Al-Cu-Er system at 673 K have been obtained, and the microstructures of as-cast alloys in the Al-rich region are also investigated. One ternary phase τ 1 -Al 8 Cu 4 Er with a composition of 59.4-60.4 at.% Al, 32.2-33.8 at.% Cu, and 6.4-7.7 at.% Er is observed in both as-cast and annealed alloys. At 673 K, the binary Al 3 Er phase dissolves about 3.51 at.% Cu. The calculated solidification paths (based on the CALPHAD method) of as-cast alloys are in agreement with the experimental results.

Mechanical properties and deformation behavior of Al/Al7075, two-phase material

International Nuclear Information System (INIS)

Sherafat, Z.; Paydar, M.H.; Ebrahimi, R.; Sohrabi, S.

2010-01-01

In the present study, mechanical properties and deformation behavior of Al/Al7075, two-phase material were investigated. The two-phase materials were fabricated by mixing commercially pure Al powder with Al7075 chips and consolidating the mixture through hot extrusion process at 500 o C. Mechanical properties and deformation behavior of the fabricated samples were evaluated using tensile and compression tests. A scanning electron microscope was used to study the fracture surface of the samples including different amount of Al powder, after they were fractured in tensile test. The results of the tensile and compression tests showed that with decreasing the amount of Al powder, the strength increases and ductility decreases. Calculation of work hardening exponent (n) indicated that deformation behavior does not follow a regular trend. In a way that the n value was approved to be variable and a strong function of strain and Al powder wt% of the sample. The results of the fractography studies indicate that the type of fracture happened changes from completely ductile to nearly brittle by decreasing the wt% of Al powder from 90% to 40%.

A Scholar from Saray: Mawlana Zada al-Sarayi (754/1353–791/1389 in the Biographical Dictionary of Taqi al-Din al-Maqrizi (766/1365–845/1441 “Kitab al-Muqaffa al-Kabir” (The Great Rhymed Book

Directory of Open Access Journals (Sweden)

D.R. Zaynuddinov

2017-03-01

Full Text Available Research objective: to introduce into academic circulation previously unknown source on the Golden Horde history. Research materials: biographical dictionary of Taqi al-Din al-Maqrizi (766/1365 – 845/1441 “Kitab al-Muqaffa al-Kabir” (The Great Rhymed Book. Results and novelty of the research: This article contains materials from the works of historians engaged in the narrative biography, which V.G. Tiesenhausen did not include in his “Collection of Materials on the Golden Horde history (extract from Arab writings”, although their writings contain very valuable information about the Golden Horde History. Research novelty consists in the fact that the author of this article presents one paragraph from biographical dictionary of Taqi al-Din al-Maqrizi, whose article number 421 provides information about a scholar from Saray – Mawlana Zada al-Sarayi. The author provides its translation and commentary referring to the more than ten medieval Arab sources. After receiving basic education at home, Mawlana Zada al-Sarayi traveled to many Eastern countries in search of knowledge and after having received high recognition he settled in Cairo as a teacher of Sharia Sciences. Despite the fact that his life was interrupted at an early age (36 years, he left a deep mark in science. His son Muhibbu al-Din (Cairo, 791/1389 – Mecca, Friday, the 3rd of Dhu al-Hijjah 859/13 November 1455 also became a great scholar as well as an imam of Sultan al-Ashraf Barsbay himself and other sultans after him. Nisba al-Sarayi sounded on the lips of the Ulema of the East as a symbol of learnedness and high temper. As a result of research it must be said that the study of life of Mawlana Zada al-Sarayi (754/1353 – 791/1389 and the number of migrants from Desht-i Kipchak in Egypt will help researchers in a deeper and more detailed study of the Golden Horde history.

Improved AlGaN/GaN HEMTs Grown on Si Substrates Using Stacked AlGaN/AlN Interlayer by MOCVD

International Nuclear Information System (INIS)

Wang Yong; Yu Nai-Sen; Li Ming; Lau Kei-May

2011-01-01

AlGaN/GaN high electron mobility transistors (HEMTs) are grown on 2-inch Si (111) substrates by MOCVD. The stacked AlGaN/AlN interlayer with different AlGaN thickness and indium surfactant doped is designed and optimized to relieve the tensile stress during GaN epitaxial growth. The top 1.0μm GaN buffer layer grown on the optimized AlGaN/AlN interlayer shows a crack-free and shining surface. The XRD results show that GaN(002) FWHM is 480 arcsec and GaN(102) FWHM is 900 arcsec. The AGaN/GaN HEMTs with optimized and non-optimized AlGaN/AlN interlayer are grown and processed for comparison and the dc and rf characteristics are characterized. For the dc characteristics of the device with optimized AlGaN/AlN interlayer, maximum drain current density I dss of 737mA/mm, peak transconductance G m of 185mS/mm, drain leakage current density I ds of 1.7μA/mm, gate leakage current density I gs of 24.8 μA/mm and off-state breakdown voltage V BR of 67 V are achieved with L g /W g /L gs /L gd = 1/10/1/1 μm. For the small signal rf characteristics of the device with optimized AlGaN/AlN interlayer, current gain cutoff frequency f T of 8.3 GHz and power gain cutoff frequency f max of 19.9 GHz are achieved with L g /W g /L gs /L gd = 1/100/1/1 μm. Furthermore, the best rf performance with f T of 14.5 GHz and f max of 37.3 GHz is achieved with a reduced gate length of 0.7μm. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Konsepsi Ibnu Jarir Al-Tabari Tentang Al-Qur’an, Tafsir Dan Ta’wil

Directory of Open Access Journals (Sweden)

A.M Ismatulloh

2012-12-01

Full Text Available The objective of this research is to describe the concept of Ibnu Jarir al-Tabari about al-Qur’an, tafsir and ta’wil. Ibn Jarir al-Tabari is an outstanding expert in the classic Islamic tradition. His knowledge in hadits, fiqh, lughah, history, and tafseer is unquestionable. This study uses an analytical descriptive design. The findings show that: Firstly, in defining al-Qur’an, al-Tabari focused on the al-Qur’an as an Arabic language text, not in other language. Secondly, al-Qur’an is written in sab’ah ahruf. It means that there are 7 different kinds of language with the same meaning. Thirdly, al-Qur’an comes from seven heaven’s door. Fourthly, there is no different word between tafseer and ta’wil. They have same meaning. These concepts are different to other concepts proposed by other ulama.

Predicción meteorológica estacional y su comunicación al pequeño agricultor en el nordeste de Brasil

Directory of Open Access Journals (Sweden)

Manuel Cabalar Fuentes

2014-01-01

Full Text Available Muchos aspectos de la vida cotidiana de las personas son influenciadas por las condiciones meteorológicas. Este hecho es más claro si la actividad se desarrolla al aire libre, expuesta directamente a los avatares atmosféricos. Bien conocido es el caso de la agricultura y la ganadería, que para tener éxito y rendir adecuadamente necesitan de agua y temperaturas dentro de unos determinados umbrales. En este contexto, las predicciones meteorológicas importan mucho, pues ayudan a los productores a planificar mejor sus actividades, anticiparse a circunstanciales eventos negativos y mejorar, por tanto, las cosechas. Son más vulnerables los pequeños agricultores familiares, sin medios técnicos y con poco o ningún acceso a la información meteorológica, y es peor aún en áreas de Clima irregular como las semiáridas, donde las lluvias caen erráticamente y de vez en cuando las sequías causan grandes estragos precisamente en esos pequeños productores. En este trabajo vamos a hacer una aproximación teórica a la problemática de la comunicación de las predicciones meteorológicas a pequeños agricultores, con atención especial en el Sertão (el espacio semiárido del Nordeste de Brasil, completado con una visión previa de los mecanismos atmosféricos y oceánicos que influencian su clima, bien conocidos y monitoreados continuamente, facilitando la predicción anticipada de las condiciones meteorológicas estacionales.

Predicting glass-forming compositions in the Al-La and Al-La-Ni systems

International Nuclear Information System (INIS)

Gargarella, P.; de Oliveira, M.F.; Kiminami, C.S.; Pauly, S.; Kuehn, U.; Bolfarini, C.; Botta, W.J.; Eckert, J.

2011-01-01

Research highlights: → The glass-forming ability of the Al-La and Al-La-Ni systems was studied using the λ* and the λ.Δe criteria. → Both criteria predicted with just 1% at. of error the best glass-former verified so far in the Al-La system. → Four new glass-former compositions could be predicted in the Al-La-Ni system using the λ.Δe criterion. → The best glass-former reported so far in the Al-La-Ni system was found. - Abstract: In this work, a criterion considering the topological instability (λ) and the differences in the electronegativity of the constituent elements (Δe) was applied to the Al-La and Al-Ni-La systems in order to predict the best glass-forming compositions. The results were compared with literature data and with our own experimental data for the Al-La-Ni system. The alloy described in the literature as the best glass former in the Al-La system is located near the point with local maximum for the λ.Δe criterion. A good agreement was found between the predictions of the λ.Δe criterion and literature data in the Al-La-Ni system, with the region of the best glass-forming ability (GFA) and largest supercooled liquid region (ΔT x ) coinciding with the best compositional region for amorphization indicated by the λ.Δe criterion. Four new glassy compositions were found in the Al-La-Ni system, with the best predicted composition presenting the best glass-forming ability observed so far for this system. Although the λ.Δe criterion needs further refinements for completely describe the glass-forming ability in the Al-La and Al-La-Ni systems, the results demonstrated that this criterion is a good tool to predict new glass-forming compositions.

Electric quadrupole moments of neutron-rich nuclei {sup 32}Al and {sup 31}Al

Energy Technology Data Exchange (ETDEWEB)

Kameda, D., E-mail: kameda@ribf.riken.jp; Ueno, H. [RIKEN Nishina Center (Japan); Asahi, K.; Nagae, D.; Takemura, M.; Shimada, K. [Tokyo Institute of Technology, Department of Physics (Japan); Yoshimi, A.; Nagatomo, T.; Sugimoto, T. [RIKEN Nishina Center (Japan); Uchida, M.; Arai, T.; Takase, K.; Suda, S.; Inoue, T. [Tokyo Institute of Technology, Department of Physics (Japan); Murata, J.; Kawamura, H. [Rikkyo University, Department of Physics (Japan); Watanabe, H. [Australian National University, Department of Nuclear Physics (Australia); Kobayashi, Y.; Ishihara, M. [RIKEN Nishina Center (Japan)

2007-11-15

The electric quadrupole moments for the ground states of {sup 32}Al and {sup 31}Al have been measured by the {beta} ray-detected nuclear quadrupole resonance method. Spin-polarized {sup 32}Al and {sup 31}Al nuclei were obtained from the fragmentation of {sup 40}Ar projectiles at E/A = 95 MeV/nucleon, and were implanted in a single crystal {alpha}-Al{sub 2}O{sub 3} stopper. The measured Q moment of {sup 32}Al, |Q({sup 32}Al)| = 24(2) mb, is in good agreement with a conventional shell-model calculation with a full sd model space and empirical effective charges, while that of {sup 31}Al is considerably smaller than the sd calculations.

The constitution of alloys in the Al-rich corner of the Al-Si-Sm ternary system

International Nuclear Information System (INIS)

Markoli, B.; Spaic, S.; Zupanic, F.

2001-01-01

The constitution of alloys and the liquidus surface in the Al-rich corner of the Al-Si-Sm ternary system were determined by the examination of controlled heated and cooled specimens, as well as heat-treated specimens by means of optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal analysis and X-ray diffraction. The Al-rich corner of the Al-Si-Sm ternary system comprises five regions of primary crystallisation (α Al , β Si , Al 3 Sm, Al 2 Si 2 Sm and AlSiSm) with following characteristic invariant reaction sequences: ternary eutectic reaction L → α Al + β Si + Al 2 Si 2 Sm, and two liquidus transition reactions, i. e., L + Al 3 Sm → α Al + AlSiSm, and L + AlSiSm → α Al + Al 2 Si 2 Sm. Along with the position of ternary eutectic and both interstitial points in the Al-rich corner of the Al-Si-Sm ternary system, the temperatures for each reaction were determined. (orig.)

LOS SIGNIFICADOS DE SER HOMBRE ASOCIADOS AL CONSUMO DE SUSTANCIAS PSICOACTIVAS

Directory of Open Access Journals (Sweden)

MARCO ANTONIO TOQUERO HERNÁNDEZ

2013-01-01

Full Text Available e l estudio del uso de sustancias psicoactivas ( spa , desde el construc - cionismo social, implica comprender cómo se articulan los conceptos y las prácticas. e l objetivo del presente trabajo fue conocer los signifi - cados de ser hombre, en un usuario de spa . s e empleó una metodo - logía cualitativa, a través de la historia de vida, se realizó un análisis narrativo en cuatro ejes: i c onsumo de spa en la familia y entorno; ii v ida emocional; iii c ontexto de pares y i V r elación con la figura femenina. l os resultados muestran que el uso de spa en la familia y entorno es una práctica que se “naturaliza” en la vida cotidiana; en la vida emocional, es un medio para evitar el sentimiento de vulne - rabilidad como hombres; en la relación con los pares es un recurso para obtener reconocimiento; y con la figura femenina representa un medio de control. d esde una perspectiva de género, el uso de spa significa ser hombre, asumir el control y poder.

Disordered crystal structure of 20H-AlON, Al10O3N8

International Nuclear Information System (INIS)

Banno, Hiroki; Funahashi, Shiro; Asaka, Toru; Hirosaki, Naoto; Fukuda, Koichiro

2015-01-01

The disordered crystal structure of 20H-AlON (Al 10 O 3 N 8 ) was determined by combined use of X-ray powder diffraction and transmission electron microscopy. The title compound is hexagonal with space group P6 3 /mmc (Z=2) and the unit-cell dimensions are a=0.307082(5) nm, c=5.29447(8) nm and V=0.432376(12) nm 3 . The structural model showed the positional disordering of three of the six Al sites in the unit cell. The reliability indices calculated from the Rietveld method were R wp =6.97%, S (=R wp /R e )=1.68, R p =5.45%, R B =5.13% and R F =4.56%. We interpreted the disordered structure of 20H-AlON as a statistical average of six different types of ordered structural configurations, which are composed of an octahedral [Al(O, N) 6 ] layer and tetrahedral [Al(O, N) 4 ] layers. We demonstrated the high correlations between the hexagonal unit-cell dimensions and the octahedral layer concentrations for AlON and SiAlON polytypoids. - Graphical abstract: Variations of a and c/(n O +n T ) with n O /(n O +n T ). The a and c are the hexagonal unit-cell dimensions of AlON, SiAlON and AlN. The n O and n T are, respectively, the numbers of octahedral and tetrahedral layers in the unit cells. The unit-cell dimensions in literature are plotted in black plus for AlON and black cross for SiAlON. The unit-cell dimensions of AlN are a=0.3110 nm and c=0.4980 nm. - Highlights: • Crystal structure of Al10O3N8 is determined by laboratory X-ray powder diffraction. • The atom arrangements are represented by the split-atom model. • Six types of ordered atom arrangements are derived from the disordered structure. • Hexagonal unit-cell dimensions changed systematically for AlON and SiAlON compounds

Prinsip Pendidikan Karakter dalam Islam: Studi Komparasi Pemikiran Al-Ghazali dan Burhanuddin Al-Zarnuji

Directory of Open Access Journals (Sweden)

Agus Setiawan

2014-06-01

Full Text Available The impelemtantion of character education that is done by the Indonesian government recently has been provoked by al-Ghazali and Burhanuddin al-Zarnuji long ago. It was proven by some written thoughts of al-Ghazali and Burhanuddin al-Zarnuji. They were very famous scientists in their era and widely welknown as educational experts who produced some phenomenal thoughts many people use today. Al-Ghazali and Burhanuddin al-Zarnuji lived in the era of Bani Abbasiyah monarchy, but Both of them lived in different era. Al-Ghazali was born first, then Burhanuddin al-Zarnuji. They had different mazhab, al-Ghazali went to the traditional principle of mazhab Syafi’I and Burhanuddin al-Zarnuji went to the modern principle of mazhab Hanafi. The differences, of course, would create a different thought. Still, they might have a similar principle of Islamic character education. The thoughts of character education of al-Ghazali have been poured in the “Ayyuha Walad” focusing to the students’ character building characterized by religiously obedient, skillfull of general and religious knowledge, socially helpful, affectionate, generous, good citizen, and coloring the society. Some applicable thoughts of character education of Ayyuha al-Walad of al-Gazhali to the contemporary education are: the balance of the happiness purposes of the recent life and the life after death, qana’ah and tawakal, affectionate, caring other, patience, honesty, philanthrophy, social works, generousity, democratic, peace makers, and patriotic. Those characters are also directed in the islamic character education nowdays. So that, the thoughts of al-Ghazali positively and responsively are absorbed by the Indonesian government to build the national character widely implementing in the national curriculum based on the local wisdom and the Islamic values. In the end, the students are able to live happily based on the Islamic rules by implementing the good behavior. Similar to the al

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY

Directory of Open Access Journals (Sweden)

M. S. Kaiser

2014-12-01

Full Text Available The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were also studied using JMAK type analysis to see if there exists any correlation between the methods. Recrystallization fraction behavior between two methods the scandium added alloys show the higher variation due to precipitation hardening and higher recrystallization behavior. The scandium and zirconium as a combined shows the more variation due to formation of Al3(Sc, Zr precipitate. From the microstructure it is also observed that the base Al-Mg alloy attained almost fully re-crystallized state after annealing at 400 °C for 60 minutes

Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis.

Science.gov (United States)

Knox, John E; Halls, Mathew D; Hratchian, Hrant P; Schlegel, H Bernhard

2006-03-28

Tris(8-hydroxyquinoline)aluminum(III), AlQ3, is used in organic light-emitting diodes (OLEDs) as an electron-transport material and emitting layer. The reaction of AlQ3 with trace H2O has been implicated as a major failure pathway for AlQ3-based OLEDs. Hybrid density functional calculations have been carried out to characterize the hydrolysis of AlQ3. The thermochemical and atomistic details for this important reaction are reported for both the neutral and oxidized AlQ3/AlQ3+ systems. In support of experimental conclusions, the neutral hydrolysis reaction pathway is found to be a thermally activated process, having a classical barrier height of 24.2 kcal mol(-1). First-principles infrared and electronic absorption spectra are compared to further characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 hydrolysis pathway is found to be 8.5 kcal mol(-1) lower than for the neutral reaction, which is significant since it suggests a role for charge imbalance in promoting chemical failure modes in OLED devices.

Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy

Directory of Open Access Journals (Sweden)

Liming Liu

2014-02-01

Full Text Available Based on the idea of alloying welding seams, a series of Zn–xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn–xAl filler metals, and when Zn–30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn–30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn–40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn2- and Al-based solid solution, the mechanical property of the joints was deteriorated.

Intentando leer el Caribe

Directory of Open Access Journals (Sweden)

Juan Carlos Rodríguez

2011-06-01

Full Text Available La primera sorpresa al releer a Alejo Carpentier se nos ofrece sin duda como la clave de cualquier escritura novelística: quiero decir, hasta qué punto Carpentier es capaz de “suspender nuestra incredulidad”, como indicaba Coleridge. De ahí la sorpresa: hoy es difícil leer novelas y mucho más creérnoslas. Afortunadamente Carpentier escribió en un momento en que aún se creía en la Literatura (precisamente casi el último o mejor momento, en que aún se creía en ese milagro de contar historias cotidianas como si fueran “maravillas”.

Disseny de hardware específic per a l'extracció de característiques i comparació d'empremtes dactilars.

OpenAIRE

Cañellas Alberich, Nicolau

2006-01-01

El método de identificación mediante huella dactilar es uno de los más fiables que se conocen y un serio candidato a ser incorporado a la vida cotidiana. En los últimos años la biometría de huella dactilar se ha ido acercando al gran público y ya no es extraña la utilización de sistemas automáticos de verificación dactilar para el acceso a algunas instalaciones.El mercado se encamina hacia un tipo de tarjetas personales que integren un sensor de huella dactilar junto a un dispositivo en el qu...

Educación y valores en la sociedad, asunto de políticas públicas o construcción ciudadana

Directory of Open Access Journals (Sweden)

Roberto Anaya Rodríguez

2013-01-01

Full Text Available El presente artículo discute la formación de valores en la política educativa y la participación ciudadana en el contexto mexicano. Se realiza un análisis crítico contrastando la normativa legal vigente y el desarrollo histórico vinculado. Se concluye que con independencia del tipo de valores o principios que se esté buscando inducir por medio de los programas educativos, existe otro conjunto de principios manifestados en las actividades cotidianas al interior de las aulas y espacios educativos, los cuales determinan en mayor medida los valores y las prácticas de convivencia social.

ENSAYO: RELACIONES DE GÉNERO EN INVESTIGACIONES BASADAS EN EXPERIENCIAS DE HISTORIA ORAL

Directory of Open Access Journals (Sweden)

Olga Cabrera García

2008-08-01

Full Text Available Este ensayo se propone analizar algunas cuestiones acerca de la perspectiva multidisciplinar en la metodología de la historia oral. Las investigaciones de historia oral tienen algunas características que le dan su especificidad pero, el artículo se concentra sobre dos de ellas: la entrevista y la construcción del documento oral. Se presentan algunas experiencias de ambas etapas de la investigación aunque el énfasis recae sobre el segundo aspecto. Se estudia la vida cotidiana así como la memoria, vinculadas al tiempo, con el propósito de comprender la historia oral.

El problema del sujeto en la posmodernidad occidental

Directory of Open Access Journals (Sweden)

Mario Magallón Anaya

2013-01-01

Full Text Available El art culo cuestiona la tesis hist rica de la construcci n de sujeto moderno en Am rica Latina en los marcos de la democracia liberal, dado que los procesos de incorporaci n del hombre americano al mundo occidental se han presentado de forma contradictoria y ambigua en medio de los debates sobre la formaci n de las categor as de ciudadan a , de democracia y de sociedad civil , lo que lleva a pensar en la naturaleza de los movimientos y representaciones sociales actuales en Am rica Latina, pero tambi n en las pr cticas sociales cotidianas que incluyen lo ideol gico y lo pol tico institucional.

FUNDAMENTACIÓN DE LA ENSEÑANZA DE LA BIOÉTICA EN MEDICINA

OpenAIRE

Outomuro,Delia

2008-01-01

Al repensar el modelo de atención médica, se vuelve evidente la necesidad de formar un médico general con una visión integral del hombre y de la medicina, capaz de enfrentarse críticamente a los problemas que entraña la práctica cotidiana. La incorporación de la bioética en los currículos de grado y posgrado constituye una estrategia fundamental para mejorar la calidad de atención sanitaria y desarrollar una práctica médica en un marco que enfatice la atención integrada sobre la especializada...

Trombosis venosa en el embarazo

Directory of Open Access Journals (Sweden)

DR. M. Fernando Ferrer

2014-11-01

El uso de anticoagulantes en pacientes obstétricas requiere de un plan de interrupción del embarazo lo más controlado posible. En la práctica clínica cotidiana esto no siempre es posible, debido a la incapacidad de predecir el momento de inicio del trabajo de parto. Por este motivo las recomendaciones relativas al manejo analgésico y anestésico del parto están basadas en el conocimiento de los cambios fisiológicos, farmacocinético y farmacodinámico de los anticoagulantes utilizados, lo que se analiza en extenso en esta revisión.

la escritura oficial del registro civil: cuando la ciudadanía pasa por la inscripción*

Directory of Open Access Journals (Sweden)

Claudine Dardy

2002-01-01

Full Text Available Los estados modernos registran oficialmente las identidades de los individuos. Este registro es una obligación, un cierto tipo de control; pero al mismo tiempo brinda un espacio social con todos los derechos que le corresponden, es decir, provee de identidades sociales. Aunque esta inscripción y burocratización de la vida cotidiana es un control, paradójicamente abre espacios de libertad. Así, aunque el modelo identitario del Registro Civil otorga privilegios a ciertas marcas (nombre, apellido, nacionalidad, sexo, impone la permanencia de las mismas. Un estado democrático dirige y codifica las posibles salidas de este modelo.

¡VIVE LAS MATEMÁTICAS! Matemáticas en educación infantil: fundamento y práctica en el aula

OpenAIRE

López Perela, María

2013-01-01

RESUMEN Desde que nacemos, el lenguaje lógico-matemático está presente en nuestra vida cotidiana, aunque en la mayoría de las ocasiones, no seamos conscientes de ello. El niño, atraviesa una serie de etapas en relación a la formación de capacidades relacionadas con el desarrollo lógico-matemático, que van consolidándose a medida que avanzan los cursos. Es importante, desde los primeros años de la etapa escolar, hacer ver al niño que las matemáticas no están sólo presentes en los libros de tex...

Bueno, hasta luego: el uso de bueno en conversaciones

OpenAIRE

Gregori-Signes, Carmen

1996-01-01

En las páginas que siguen presentamos un posible análisis de bueno en su función de marcador del discurso. Este análisis es parte (y a la vez resultado) de un trabajo contrastivo en torno a well/bueno y de otros marcadores del discurso en inglés y en castellano, dado su frecuente uso en la conversación cotidiana. La razón por la que se comparan estos dos marcadores es porque se pensó que podían coincidir en su función en ambos idiomas, y se procedió al análisis para comproba...

Optical, structural, and nuclear scientific studies of AlGaN with high Al composition

Science.gov (United States)

Lin, Tse Yang; Chung, Yee Ling; Li, Lin; Yao, Shude; Lee, Y. C.; Feng, Zhe Chuan; Ferguson, Ian T.; Lu, Weijie

2010-08-01

AlGaN epilayers with higher Al-compositions were grown by Metalorganic Chemical Vapor Deposition (MOCVD) on (0001) sapphire. Trimethylgallium (TMGa), trimethylaluminium (TMAl) and NH3 were used as the source precursors for Ga, Al, and N, respectively. A 25 nm AlN nucleation layer was first grown at low-temperature of 590 °C at 300 Torr. Followed, AlxGa1-xN layers were grown at 1080 °C on low-temperature AlN nucleation layers. The heterostructures were characterized by a series of techniques, including x-ray diffraction (XRD), Rutherford backscattering (RBS), photoluminescence (PL), scanning electron microscopy (SEM) and Raman scattering. Precise Al compositions were determined through XRD, RBS, and SEM combined measurements. Room Temperature Raman Scattering spectra shows three major bands from AlGaN alloys, which are AlN-like, A1 longitudinal optical (LO) phonon modes, and E2 transverse optical (TO) band, respectively, plus several peak comes from the substrate. Raman spectral line shape analysis lead to an optical determination of the electrical property free carrier concentration of AlGaN. The optical properties of AlGaN with high Al composition were presented here.

Ion-beam mixing and thermal annealing of Al--Nb and Al--Ta thin films

International Nuclear Information System (INIS)

Rai, A.K.; Bhattacharya, R.S.; Mendiratta, M.G.; Subramanian, P.R.; Dimiduk, D.M.

1988-01-01

Ion-beam mixing and thermal annealing of thin, alternating layers of Al and Nb, as well as Al and Ta, were investigated by selected area diffraction and Rutherford backscattering. The individual layer thicknesses were adjusted to obtain the overall compositions as Al 3 Nb and Al 3 Ta. The films were ion mixed with 1 MeV Au + ions at a dose of 1 x 10 16 ions cm/sup -2/ . Uniform mixing and amorphization were achieved for both Al--Nb and Al--Ta systems. Equilibrium crystalline Al 3 Nb and Al 3 Ta phases were formed after annealing of ion mixed amorphous films at 400 0 C for 6 h. Unmixed films, however, remained unreacted at 400 0 C for 1 h. Partial reaction was observed in the unmixed film of Al--Nb at 400 0 C for 6 h. After annealing at 500 0 C for 1 h, a complete reaction and formation of Al 3 Nb and Al 3 Ta phases in the respective films were observed. The influence of thermodynamics on the phase formation by ion mixing and thermal annealing is discussed

Effect of elevated Al and pH on the growth and root morphology of Al-tolerant and Al-sensitive wheat seedlings in an acid soil

Directory of Open Access Journals (Sweden)

Md. Toufiq Iqbal

2014-03-01

Full Text Available Aluminium ion (Al3+ toxicity and hydrogen ion (H+ activity are the major constraints for plant growth in acid soil. This study was undertaken to determine the effect of pH and Al on the growth response and changes in root morphology of Al-tolerant (ET8 and Al-sensitive (ES8 wheat seedlings. Different levels of AlCl3 and CaCO3 were added to the soils to manipulate soil pH and extractable Al. The results showed that the bulk soil pH remained constant at pH 4.1 with further applications of AlCl3, and that the seedlings died at the 200 mg AlCl3/kg treatments. The ET8 seedlings responded better than the ES8 seedlings in both low and high Al and pH. The ET8 seedlings had higher root surface areas and root tip numbers than the ES8 seedlings in the Al treatment. In contrast, the ES8 had higher root diameters than the ET8 seedlings due to the elevated Al supply. Apoplast Al increased with the increase of soil available extractable Al, and declined with the decrease of soil extractable Al. The ET8 seedlings accumulated more Al in their apoplast than the ES8 seedlings. This study concluded that accumulation of Al in the apoplast is also involved in Al tolerance mechanism with the addition of organic acid exudation.

Information of “Nukhbat al-dahr fi ‘aja’ib al-barr wa-al-bahr” by ad-Dimashqi about the Turkic Tribes of Dasht-i Kipchak »

Directory of Open Access Journals (Sweden)

Z.S. Ilyasova

2016-12-01

Full Text Available This article introduced into academic circulation information of such a historical source as “Nukhbat al-dahr fi ‘aja’ib al-barr wa-al-bahr” (Excerpts of Time on the Marvels of the Land and Sea on Kipchak clans and Turkic tribes of Dasht-i Kipchak. The material of the study is drawn from this source. Main scientific result of this work was the source’s translation into Russian accompanied by scientific comments. Sheikh Shams al-Din Abu Abdallah Muhammad Abu Talib al-Ansari al-Sufi al-Dimashqi was the author of this work. Some scholars have mistakenly confuse him with another chronicler named Shihab al-Din Ahmad ibn Yahya Ibn Fadlallah al-Omari al-Dimashqi. There is a widespread misconception that while writing on Kipchak clans and Turkic tribes al-Dimashqi used the data of such an author as Muhammad ibn Ibrahim ibn Yahya al-Ansari al-Qutub al-Warraq al-Vatvat, also known as Ahmad al-Tini. After had studying the manuscripts of al-Tini and al-Dimashqi, we did not notice the connection between these two authors regarding their information about Kipchak clans and Turkic tribes of Dasht-i Kipchak. After had studying the information about Kipchak clans and Turkic tribes of Dasht-i Kipchak, we put forward the theory that 16 ethnonyms previously identified as Kipchak clans, are actually the etnonyms of eight Kipchak clans and eight Turkic tribes. The article also contains the extraction from “Nukhbat al-dahr fi ‘aja’ib al-barr wa-al-bahr” regarding the geography of Dasht-i Kipchak and the countries inhabited by the Turks. The following data are unique in this source: 1. The text describes such rivers as Ceyhun (Amu Darya, Seyhun (Syr Darya, Itil (Volga, as well as Khorezm and Khazar Seas (Aral and Caspian Seas. 2. Additionally, this text lists the following Turkic peoples: al-Kharlukhiya (Karluks, al-Khirgaziya (Kyrgyz, al-Kaymakiya (Kimaks, al-Guzziya (Oguz, al-Bazhanakiya (Pechenegs, al-Tuguzguziya (Uighurs, al-Khulkhiya (?, al

Studies on SiC(p) reinforced Al-Al sub 3 Ni eutectic matrix composites

International Nuclear Information System (INIS)

Masrom, A.K.; Foo, L.C.; Ismail, A.B.

1996-01-01

An investigation on processing of Al-5.69wt% Ni eutectic with SiC particulate composites is reported. The intermetallic composites are prepared by elemental powder metallurgy route and sintered at two different temperatures, i.e., 600 degree C and 620 degree C. Results show that the metal matrix was Al-Al sub 3 Ni eutectic. The phase analysis by XRD identified the presence of Al sub 3 Ni and Al as dominant phases together with silicon and Al sub 4 C sub 3 phase as minor phases. The Al sub 4 C sub 3 and Si phases are formed during sintering due to SiC-Al interface reaction. SEM micrographs also reveal the formation of microvoid surrounding the SiC particle

The constitution of alloys in the Al-rich corner of the Al-Si-Sm ternary system

Energy Technology Data Exchange (ETDEWEB)

Markoli, B.; Spaic, S. [Ljubljana Univ. (Slovenia). Faculty of Natural Science and Engineering; Zupanic, F. [Maribor Univ. (Slovenia). Faculty of Mechanical Engineering

2001-09-01

The constitution of alloys and the liquidus surface in the Al-rich corner of the Al-Si-Sm ternary system were determined by the examination of controlled heated and cooled specimens, as well as heat-treated specimens by means of optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal analysis and X-ray diffraction. The Al-rich corner of the Al-Si-Sm ternary system comprises five regions of primary crystallisation ({alpha}{sub Al}, {beta}{sub Si}, Al{sub 3}Sm, Al{sub 2}Si{sub 2}Sm and AlSiSm) with following characteristic invariant reaction sequences: ternary eutectic reaction L {yields} {alpha}{sub Al} + {beta}{sub Si} + Al{sub 2}Si{sub 2}Sm, and two liquidus transition reactions, i. e., L + Al{sub 3}Sm {yields} {alpha}{sub Al} + AlSiSm, and L + AlSiSm {yields} {alpha}{sub Al} + Al{sub 2}Si{sub 2}Sm. Along with the position of ternary eutectic and both interstitial points in the Al-rich corner of the Al-Si-Sm ternary system, the temperatures for each reaction were determined. (orig.)

Electronic Structures and Bonding Properties of Ti2AlC and Ti3AlC2

Institute of Scientific and Technical Information of China (English)

MIN Xinmin; REN Yi

2007-01-01

The relation among electronic structure, chemical bond and property of Ti2AlC, Ti3AlC2 and doping Si into Ti2AlC was studied by density function and the discrete variation (DFT-DVM) method. After adding Si into Ti2AlC, the interaction between Si and Ti is weaker than that between Al and Ti, and the strengths of ionic and covalent bonds decrease both. The ionic and covalent bonds in Ti3AlC2, especially in Ti-Al, are stronger than those in Ti2AlC. Therefore, in synthesis of Ti2AlC, the addition of Si enhances the Ti3AlC2 content instead of Ti2AlC. The density of state (DOS) shows that there is mixed conductor characteristic in Ti2AlC and Ti3AlC2. The DOS of Ti3AlC2 is much like that of Ti2AlC. Ti2SixAl1-x C has more obvious tendency to form a semiconductor than Ti2AlC, which is seen from the obvious difference of partial DOS between Si and Al3p.

Pornographie als Metapher

Directory of Open Access Journals (Sweden)

Caroline Schubarth

2010-02-01

Full Text Available In diesem Artikel werden unterschiedliche metaphorische Verwendungen des Pornografiebegriffs und deren Implikationen untersucht. Während die Existenz von Pornografie der feministischen Anti-Porno-Bewegung als Erklärung für die anhaltende Diskriminierung von Frauen in westlichen Gesellschaften dient, nutzen rechtskonservative Kräfte den Pornografievorwurf als Rechtfertigung für die Zensur von als deviant empfundenen Identitäten und sexuellen Praktiken.

Deletion of ALS5, ALS6 or ALS7 increases adhesion of Candida albicans to human vascular endothelial and buccal epithelial cells

OpenAIRE

ZHAO, XIAOMIN; OH, SOON-HWAN; HOYER, LOIS L.

2007-01-01

C. albicans yeast forms deleted for ALS5, ALS6 or ALS7 are more adherent than a relevant control strain to human vascular endothelial cell monolayers and buccal epithelial cells. In the buccal and vaginal reconstituted human epithelium (RHE) disease models, however, mutant and control strains caused a similar degree of tissue destruction. Deletion of ALS5 or ALS6 significantly slowed growth of the mutant strain; this phenotype was not affected by addition of excess uridine to the culture medi...

Alpha and beta stabilizer character of Al in Zr-Nb-Al alloys

International Nuclear Information System (INIS)

Peruzzi Bardella, A.; Bolcich, J.C.

1987-01-01

The T β/α+β of Zr5Nb and Zr5Nb2Al (weight %) were determined in order to observe the alpha-stabilizer character of Al in ternary Zr-Nb-Al alloys. Techniques employed were change of resistivity with temperature in dynamic experiences, and metallography of samples quenched to room temperature after isothermal annealings. The T β/α+β of the ternary resulted 17 ± 8 deg C higher than that of the binary alloy. In addition, taking into account the results of previous investigations of the transformation of beta on quenching Zr-Nb-Al alloys from the beta field to room temperature, it is concluded that the beta-stabilizer character of Nb is stronger than the alpha-stabilizer character of Al in these Zr alloys, and that the Al can have important influence on the mechanical properties by the appearance of TRIP effect. (Author) [es

Insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor devices with Al2O3 or AlTiO gate dielectrics

Science.gov (United States)

Le, Son Phuong; Nguyen, Duong Dai; Suzuki, Toshi-kazu

2018-01-01

We have investigated insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor (MIS) devices with Al2O3 or AlTiO (an alloy of Al2O3 and TiO2) gate dielectrics obtained by atomic layer deposition on AlGaN. Analyzing insulator-thickness dependences of threshold voltages for the MIS devices, we evaluated positive interface fixed charges, whose density at the AlTiO/AlGaN interface is significantly lower than that at the Al2O3/AlGaN interface. This and a higher dielectric constant of AlTiO lead to rather shallower threshold voltages for the AlTiO gate dielectric than for Al2O3. The lower interface fixed charge density also leads to the fact that the two-dimensional electron concentration is a decreasing function of the insulator thickness for AlTiO, whereas being an increasing function for Al2O3. Moreover, we discuss the relationship between the interface fixed charges and interface states. From the conductance method, it is shown that the interface state densities are very similar at the Al2O3/AlGaN and AlTiO/AlGaN interfaces. Therefore, we consider that the lower AlTiO/AlGaN interface fixed charge density is not owing to electrons trapped at deep interface states compensating the positive fixed charges and can be attributed to a lower density of oxygen-related interface donors.

Effects of Al(III and Nano-Al13 Species on Malate Dehydrogenase Activity

Directory of Open Access Journals (Sweden)

Rong Fu Chen

2011-05-01

Full Text Available The effects of different aluminum species on malate dehydrogenase (MDH activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT modified glass carbon electrode (GCE. The results showed that Al(III and Al13 can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III and Al13 concentration increase. Our study also found that the effects of Al(III and Al13 on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

Effects of Al(III) and nano-Al13 species on malate dehydrogenase activity.

Science.gov (United States)

Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

2011-01-01

The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al(13) can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al(13) concentration increase. Our study also found that the effects of Al(III) and Al(13) on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

The Recovered Treasure. The Inventory of the Property of Sicilian queens confiscated by Manfredi Alagona in 1393

Directory of Open Access Journals (Sweden)

Santoro, Daniela

2007-06-01

Full Text Available

Beginning from the discovery, in the “Archivio di Stato” of Palermo, of an inventory containing the belongings confiscated from Manfredi Alagona in 1393, this work reconstructs the story of the treasure of the Sicilian queens (Costanza of Aragon and Maria of Sicily, that had been confiscated from the powerful Alagona family, originally from Aragon, who moved to Sicily. A detailed study of the inventoried movables allows the analysis of several aspects connected to customs and society at the end of the XIVth century, from clothing to utensils, from taste and fashion to care of appearance, from the love of jewels to the workship of relics.

Fracture toughness of Ti-Al3Ti-Al-Al3Ti laminate composites under static and cyclic loading conditions

Science.gov (United States)

Patselov, A. M.; Gladkovskii, S. V.; Lavrikov, R. D.; Kamantsev, I. S.

2015-10-01

The static and cyclic fracture toughnesses of a Ti-Al3Ti-Al-Al3Ti laminate composite material containing at most 15 vol % intermetallic compound are studied. Composite specimens are prepared by terminating reaction sintering of titanium and aluminum foils under pressure. The fracture of the titanium layers is quasi-cleavage during cyclic crack growth and is ductile during subsequent static loading.

Data supporting Al-Abed et al., Environ. Sci.: Nano, 2016,

Data.gov (United States)

U.S. Environmental Protection Agency — Data files representing each of the Figures and Tables published in Al-Abed et al., Environ. Sci.: Nano, 2016, 3, 593. The data file names identify the Figure or...

Ti, Al

Indian Academy of Sciences (India)

In the present study, authors report on the effect that substrate bias voltage has on the microstructure and mechanical properties of (Ti, Al)N hard coatings deposited with cathodic arc evaporation (CAE) technique. The coatings were deposited from a Ti0.5Al0.5 powder metallurgical target in a reactive nitrogen atmosphere at ...

Growth of CdTe: Al films; Crecimiento de peliculas de CdTe: Al

Energy Technology Data Exchange (ETDEWEB)

Gonzalez A, M.; Zapata T, M. [CICATA-IPN, 89600 Altamira, Tamaulipas (Mexico); Melendez L, M. [CINVESTAV-IPN, A.P. 14-740, 07000 Mexico D.F. (Mexico); Pena, J.L. [CINVESTAV-IPN, A.P. 73 Cordemex, 97310 Merida, Yucatan (Mexico)

2006-07-01

CdTe: AI films were grown by the close space vapor transport technique combined with free evaporation (CSVT-FE). The Aluminum (Al) evaporation was made by two kinds of sources: one made of graphite and the other of tantalum. The films were deposited on glass substrates. The Al source temperature was varied maintaining the CdTe source temperature fixed as well as the substrate temperature. The films were characterized by x-ray energy dispersive analysis (EDAX), x-ray diffraction and optical transmission. The results showed for the films grown with the graphite source for Al evaporation, the Al did not incorporate in the CdTe matrix, at least to the level of EDAX sensitivity; they maintained the same crystal structure and band gap. For the samples grown with the tantalum source, we were able to incorporate the Al. The x-ray diffraction patterns show that the films have a crystal structure that depends on Al concentration. They were cubic up to 2.16 at. % Al concentration; for 19.65 at. % we found a mixed phase; for Al concentration higher than 21 at. % the films were amorphous. For samples with cubic structure it was found that the lattice parameter decreases and the band gap increases with Al concentration. (Author)

First-principles study of L10 Ti-Al and V-Al alloys

International Nuclear Information System (INIS)

Chubb, S.R.; Papaconstantopoulos, D.A.; Klein, B.M.

1988-01-01

As a first step towards understanding the reduced embrittlement of L1 0 Ti-Al alloys which accompanies the introduction of small concentrations of V, we have determined from first principles, using full-potential linearized--augmented-plane-wave calculations, the equilibrium values of the structural parameters and the associated electronic structure for the stoichiometric (L1 0 ) Ti-Al (tetragonal) compound. Our calculated values of c/a and a are in good agreement with experiment. Using the same method of calculation, we have also studied the electronic structure associated with the (hypothetical) L1 0 V-Al alloy that would form when V is substituted for Ti. We find that (1) the electronic structures of these V-Al alloys are relatively insensitive to variations of c/a and a; (2) near the Ti-Al equilibrium geometry, the electronic structures of the V-Al and Ti-Al alloys are very similar; and (3) that a rigid-band model involving substitution of V for Ti can be used to gain a qualitative understanding of the reduction in c/a which accompanies the introduction of small concentrations of V. We relate the reduction in c/a to important changes in the bonding that accompany the occupation of bands immediately above the Fermi level of the stoichiometric Ti-Al compound

Kinetic studies of oxidation of MgAlON and a comparison of the oxidation behaviour of AlON, MgAlON, O'SiAlON-ZrO{sub 2}, and BN-ZCM ceramics

Energy Technology Data Exchange (ETDEWEB)

Wang Xidong; Seetharaman, S. [Div. of Metallurgy, Royal Inst. of Tech., Stockholm (Sweden); Li Wenchao [Dept. of Physical Chemistry, Univ. of Science and Technology Beijing (USTB), Beijing, BJ (China)

2002-06-01

The kinetics and morphology of the oxidation process of magnesium-aluminium oxynitride (MgAlON), aluminium oxynitride (AlON), O'SiAlON-ZrO{sub 2}, and BN-ZCM have been studied in the temperature range 1373-1773 K (ZCM=30 wt% ZrO{sub 2}, 52 wt% Al{sub 2}O{sub 3} and 18 wt% 3 Al{sub 2}O{sub 3}.2 SiO{sub 2}). Oxidation experiments with powder and plate samples of the above materials have been carried out in air. MgAlON shows the best resistance to oxidation at lower temperatures (< 1473 K), whereas at higher temperatures ({proportional_to} 773 K), AlON shows the best resistance. O'SiAlON-ZrO{sub 2} shows very good oxidation resistance up to 1673 K. But its oxidation rate increases strongly above 1673 K, presumably due to the formation of liquid phase. BN-ZCM has the poorest oxidation resistance due to the evaporation of B{sub 2}O{sub 3}. The activation energies for the chemical oxidation reaction of AlON, MgAlON, and O'SiAlON-ZrO{sub 2} are 214, 330 and 260 kJ/mol, respectively. The overall diffusion activation energies for AlON, MgAlON, O'SiAlON-ZrO{sub 2} and BN-ZCM are 227, 573, 367 and 289 kJ/mol, respectively. (orig.)

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn-Al alloys

International Nuclear Information System (INIS)

Qin, Gaowu W.; Ren Yuping; Huang Wei; Li Song; Pei Wenli

2010-01-01

Graphical abstract: Display Omitted Research highlights: The ε-AlMn phase acts as the heterogeneous nucleus of α-Mg phase during the solidification of the AZ31 Mg alloy, not the γ-Al 8 Mn 5 phase. The grain refinement effect is very clear with the addition of only 0.5 wt% Mn-28Al alloy (pure ε-AlMn). The grain refinement does not deteriorate up to the holding time of 60 min at 740 o C. - Abstract: The effect of manganese on grain refinement of Al-containing AZ31 Mg alloy has been investigated by designing a series of Mn-Al alloys composed of either pure ε-AlMn, γ 2 -Al 8 Mn 5 or both of them using optical microscopy and X-ray diffraction. It is experimentally clarified that the grain refinement of the AZ31 Mg alloy is due to the existence of the ε-AlMn phase in the Mn-Al alloys, not the γ 2 -Al 8 Mn 5 phase. The grain size of AZ31 Mg alloy is about 91 μm without any addition of Mn-Al alloys, but remarkably decreases to ∼55 μm with the addition of either Mn-34 wt% Al or Mn-28 wt% Al. With a minor addition of 0.5 wt% Mn-28Al alloy, the grain size of AZ31 alloy decreases to ∼53 μm, and the Mn-28Al alloy can be active as grain refiner for holding time up to 60 min for the melt AZ31 alloy at 750 o C.

Vida cotidiana y laboral en las haciendas de Zinacantepec, siglos xix y xx

Directory of Open Access Journals (Sweden)

Hilda Lagunas Ruiz

2011-01-01

Full Text Available La finalidad de este artículo es presentar una perspectiva sobre las condiciones generales de vida y relaciones laborales de los trabajadores de las haciendas y ranchos del municipio de Zinacantepec en los siglos XIX y primera mitad del XX. Las haciendas y ranchos se fortalecieron durante el Porfiriato, uno de los planteamientos más aceptados señala que se logró en detrimento de la tierra de los habitantes de los pueblos, mismos que pasaron a formar parte del ejército de trabajo de estas unidades de producción, por lo que en este artículo también se analizarán las relaciones de interdependencia entre los dueños de las haciendas y los habitantes de los pueblos circunvecinos. Se define como trabajador al individuo que se adscribía voluntariamente para trabajar en el recinto de estas unidades productivas, desde españoles pobres, mestizos e indígenas. Los indígenas pertenecían a diversos grupos étnicos, como matlatzincas, otomíes, nahuas. Eran individuos que generalmente carecían de tierra propia. Los trabajadores de las haciendas recibieron diferentes denominaciones que se relacionaban con el cargo o actividad desempeñada. Estos aspectos les daban cierta jerarquía y a la vez dependencia. Existían varias clasificaciones, entre ellas la de los trabajadores permanentes, eventuales o temporales, y arrendatarios.

Ibn Qutayba en al-Andalus. La préface à I 'Adab al-Kātib dans le commentaire d'Ibn al-Sīd al-Baṭalyawsī

Directory of Open Access Journals (Sweden)

Soravia, Bruna

2004-12-01

Full Text Available Ibn Qutayba's preface to his Adab al-kātib has been considered for centuries the most important section of this work and it has been the object of many commentaries, both in the Muslim East and West. This paper deals with Ibn al-Sīd al-Baṭalyawsī´s commentary al-Iqtiḍāb, trying to show the peculiar way in which Ibn al-Sīd develops his own critique of Ibn Qutayba's controversial thesis on the relation between orthodoxy, falsafa and kalām. At the same time, the Andalusi author works out his own conception of adab, deeply influenced by his biographical experience. Finally a full translation of Ibn Qutayba's preface is proposed, half a century after G. Lecomte's partial one.

El prefacio de Ibn Qutayba a su Adab al-Kātib ha sido considerado durante siglos como el fragmento más importante de su obra, y ha sido objeto de muchos comentarios, tanto orientales como occidentales. Este artículo trata del comentario que Ibn al-Sīd al-Baṭalyawsī hizo de ese texto de Ibn Qutayba, e intenta mostrar la forma peculiar en que Ibn al-Sīd desarrolla su propia crítica a la polémica tesis de Ibn Qutayba sobre la relación entre ortodoxia, falsafa y kalām. Al mismo tiempo, el autor andalusí elabora su propia concepción del adab, profundamente influida por su experiencia biográfica. Para concluir, se presenta una traducción completa del prefacio de Ibn Qutayba, medio siglo después de la parcial realizada por G. Lecomte.

Interview als Text vs. Interview als Interaktion

Directory of Open Access Journals (Sweden)

Arnulf Deppermann

2013-09-01

Full Text Available Das Interview ist nach wie vor das beliebteste sozialwissenschaftliche Verfahren des Datengewinns. Ökonomie der Erhebung, Vergleichbarkeit und die Möglichkeit, Einsicht in Praxisbereiche und historisch-biografische Dimensionen zu erhalten, die der direkten Beobachtung kaum zugänglich sind, machen seine Attraktivität aus. Zugleich mehren sich Kritiken, die seine Leistungsfähigkeit problematisieren, indem sie auf die begrenzte Reichweite der Explikationsfähigkeiten der Befragten, die Reaktivität der Erhebung oder die Differenz zwischen Handeln und dem Bericht über Handeln verweisen. Im Beitrag wird zwischen Ansätzen, die das Interview als Text, und solchen, die es als Interaktion verstehen, unterschieden. Nach dem Text-Verständnis werden Interviews unter inhaltlichen Gesichtspunkten analysiert und als Zugang zu einer vorgängigen sozialen oder psychischen Wirklichkeit angesehen. Das Interaktions-Verständnis versteht Interviews dagegen als situierte Praxis, in welcher im Hier und Jetzt von InterviewerInnen und Befragten gemeinsam soziale Sinnstrukturen hergestellt werden. Anhand ubiquitärer Phänomene der Interviewinteraktion – Fragen, Antworten und die Selbstpositionierung von InterviewerInnen und Befragten – werden Praktiken des interaktiv-performativen Handelns im Interview dargestellt. Ihre Relevanz für die Interviewkonstitution und ihre Erkenntnispotenziale für die Interviewauswertung werden aufgezeigt. Es wird dafür plädiert, die interaktive Konstitutionsweise von Interviews empirisch zu erforschen und methodisch konsequent zu berücksichtigen. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1303131

Structure and phase composition of Al-Ce-Cu system alloys in range of quasi-binary Al-Al8CeCu4 section

International Nuclear Information System (INIS)

Belov, N.A.; Khvan, A.V.

2007-01-01

The phase diagram of the Al-Cu-Ce system in the quasibinary section area of Al-Al 8 CeCu 4 has been investigated by metallographic, thermal, micro-X-ray spectral and X-ray structural analyses. The parameters of the eutectic reaction L→(Al)+CeCu 4 Al 8 : T=610 Deg C were found out; the composition was 14% Cu and 7% Ce. This eutectics is of a disperse structure and the ternary compound contained is capable of fragmentation and spheroidizing in the heating process (starting from 540 Deg C). It was demonstrated that the area of optimal (Al)+CeCu 4 Al 8 eutectics-based alloy compositions was within the narrow limits. That is related to the fact that at a comparatively little variation of the Cu:Ce=2 ratio solidus sharply decreases and, as a result, the crystallization interval considerably extends [ru

Structural and electrical characterization of AuPtAlTi ohmic contacts to AlGaN/GaN with varying annealing temperature and Al content

OpenAIRE

Fay, Mike W.; Han, Y.; Brown, Paul D.; Harrison, Ian; Hilton, K.P.; Munday, A.; Wallis, D.; Balmer, R.S.; Uren, M.J.; Martin, T.

2008-01-01

The effect of varying annealing temperature and Al layer thickness on the structural and electrical characteristics of AuPtAlTi/AlGaN/GaN ohmic contact structures has been systematically investigated. The relationship between annealing temperature, Al content, interfacial microstructure, surface planarity and contact resistance is\\ud examined. In particular, the presence of a detrimental low temperature Pt-Al reaction is identified. This is implicated in both the requirement for a higher Al:T...

Análisis de los instrumentos de la política pública destinada a la pequeña minería y minería artesanal en Perú (2009-2013).

OpenAIRE

Sulca Huamaní, Daniyar Gulsarí

2015-01-01

La poli?tica de formalizacio?n de la pequen?a mineri?a y mineri?a artesanal en el Peru? es un espacio de poli?tica complejo por el elevado nu?mero de instituciones, programas y actores estatales y no estatales que involucra. La investigacio?n examina las fallas de implementacio?n de la poli?tica durante el peri?odo 2009-2013. Para ello, se aplica el modelo NATO (instrumentos de nodalidad, autoridad, tesoro y organizacio?n), bajo dos dimensiones, la sustantiva y la procedimental y finalment...

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn-Al alloys

Energy Technology Data Exchange (ETDEWEB)

Qin, Gaowu W., E-mail: qingw@smm.neu.edu.c [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Wenhu Road 3-11, Heping District, Shenyang 110004, Liaoning Province (China); Ren Yuping; Huang Wei; Li Song; Pei Wenli [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Wenhu Road 3-11, Heping District, Shenyang 110004, Liaoning Province (China)

2010-10-08

Graphical abstract: Display Omitted Research highlights: The {epsilon}-AlMn phase acts as the heterogeneous nucleus of {alpha}-Mg phase during the solidification of the AZ31 Mg alloy, not the {gamma}-Al{sub 8}Mn{sub 5} phase. The grain refinement effect is very clear with the addition of only 0.5 wt% Mn-28Al alloy (pure {epsilon}-AlMn). The grain refinement does not deteriorate up to the holding time of 60 min at 740 {sup o}C. - Abstract: The effect of manganese on grain refinement of Al-containing AZ31 Mg alloy has been investigated by designing a series of Mn-Al alloys composed of either pure {epsilon}-AlMn, {gamma}{sub 2}-Al{sub 8}Mn{sub 5} or both of them using optical microscopy and X-ray diffraction. It is experimentally clarified that the grain refinement of the AZ31 Mg alloy is due to the existence of the {epsilon}-AlMn phase in the Mn-Al alloys, not the {gamma}{sub 2}-Al{sub 8}Mn{sub 5} phase. The grain size of AZ31 Mg alloy is about 91 {mu}m without any addition of Mn-Al alloys, but remarkably decreases to {approx}55 {mu}m with the addition of either Mn-34 wt% Al or Mn-28 wt% Al. With a minor addition of 0.5 wt% Mn-28Al alloy, the grain size of AZ31 alloy decreases to {approx}53 {mu}m, and the Mn-28Al alloy can be active as grain refiner for holding time up to 60 min for the melt AZ31 alloy at 750 {sup o}C.

AYAT-AYAT WAH}DAT AL-WUJUd dalam Kitab Tanbi>h al-Ma>shi Karya ‘Abdurrauf al-Sinkili

Directory of Open Access Journals (Sweden)

Asep Nahrul Musadad

2015-08-01

Full Text Available Abstract: One of the key moments in discussing the history of Indonesian Islam is a polemic related to the negotiation on the doctrine of wahdat al-wujud that occured in Aceh in 17th century between the followers of Hamzah al-Fansuri and Nuruddin al-Raniri. This article focuses on analyzing several Qur’anic verses used by ‘Abdurrauf as the confirmation of his argument. In the polemical context, Abdurrauf al-Sinkili appeared to be an actor of reconciliation between two opposite sides. He tried to respond to the disputed issues through his book called “Tanbi>h al-Mashi”. As an exponent of the so-called moderate sufism (mysticism, he built the argument concerning wah}dat al-wujud based on the Quranic text. After making a thematic classification chronologically, his interpretation on these verses is analyzed by using Hussain al-Dhahaby’s theory of sufistic exegesis. In conclusion, it shows that ‘Abdurrauf’s commentary is “sufi-nazari type”, featured by his exegeses pattern. This, of course, represents his attitude as a reconciler who then needs to seek confirmation to the Qur’anic verses in evaluating wah}dat al-wujud doctrine, through which such a polemical issues occurred at that time. الملخص: إن من المرحلة الأساسية التي مرّ بها تاريخ الإسلام في اندونيسيا الجدل و النزاع حول عقيدة وحدة الوجود فى أتشيه (Aceh حول قرن السابع عشر بين أتباع حمزة الفنسوري و نور الدين الرانيري. ففي ذلك الخطاب النزاعي جاء عبد الرؤوف السنكيلي مصلحا بين الجانبين المعاكسين. وعلى مقتضى الظروف، كتب كتاب " تنبيه الماشي" الذي تطرّق فيه طريق التوسّط، ممثّلا للتصوّف المعتدل. اعتمد عبد الرؤوف على النصوص القرآنية فى تحقيق آراءه حول ت

Reviewing Medical Education in KamelAl-Senaat Al-Tebieh

Directory of Open Access Journals (Sweden)

Shahla Moradi

2017-06-01

Full Text Available Background and Objective: Among the human sciences, medicine is superior to all other sciences. One of the effective factors in education, especially in medical education is using appropriate textbooks. This study aims to consider a classic book of medical education and find its relevance to modern medicine. Materials and Methods: Reviewing and analyzing parts of Kamel Al-Senaat Al-Tebieh medical textbook. Results: This book has about four hundred thousand words and it was divided into twenty articles, each consisting of several chapters, first ten topics of which are about theoretical medicine, and others are information related to practical medicine. Conclusion: One of the most important obligations of every nation is to protect and preserve written and unwritten cultural and scientific resources Kamel Al-Senaat Al-Tebieh was written in one of the glorious periods of Iranian Medical History by Ali Ibn Abbas. It has a dignified position because of its recording method. This method is one of the best methods that is used after Ahvazi. Even today it is a valuable source of medical education.

Density and atomic volume in liquid Al-Fe and Al-Ni binary alloys

Energy Technology Data Exchange (ETDEWEB)

Plevachuk, Yu. [Ivan Franko National Univ., Lviv (Ukraine). Dept. of Metal Physics; Egry, I.; Brillo, J.; Holland-Moritz, D. [Deutsches Zentrum fuer Luft- und Raumfahrt, Koeln (Germany). Inst. fuer Raumsimulation; Kaban, I. [Chemnitz Univ. of Technolgy (Germany). Inst. of Physics

2007-02-15

The density of liquid Al-Fe and Al-Ni binary alloys have been determined over a wide temperature range by a noncontact technique combining electromagnetic levitation and optical dilatometry. The temperature and composition dependences of the density are analysed. A negative excess volume correlates with the negative enthalpy of mixing, compound forming ability and chemical short-range ordering in liquid Al-Fe and Al-Ni alloys. (orig.)

TEM characterization of Al-C-Cu-Al2O3 composites produced by mechanical milling

International Nuclear Information System (INIS)

Santos-Beltran, A.; Gallegos-Orozco, V.; Estrada-Guel, I.; Bejar-Gomez, L.; Espinosa-Magana, F.; Miki-Yoshida, M.; Martinez-Sanchez, R.

2007-01-01

Novel Al-based composites (Al-C-Cu-Al 2 O 3 ) obtained by mechanical milling (MM), were characterized by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). Analyses of composites were carried out in both, the as-milled and the as-sintered conditions. C nanoparticles were found in the as-milled condition and Al 2 O 3 nanofibers were found in as-sintered products, as determined by EELS. C and Cu react with Al to crystallize in Al 3 C 4 and Al 2 Cu structures, respectively

Formation of AlFeSi phase in AlSi12 alloy with Ce addition

Directory of Open Access Journals (Sweden)

S. Kores

2012-04-01

Full Text Available The influence of cerium addition on the solidification sequence and microstructure constituents of the Al-Si alloys with 12,6 mass % Si was examined. The solidification was analyzed by a simple thermal analysis. The microstructures were examined with conventional light and scanning electron microscopy. Ternary AlSiCe phase was formed in the Al-Si alloys with added cerium during the solidification process. AlSiCe and β-AlFeSi phases solidified together in the region that solidified the last. Cerium addition influenced on the morphology of the α-AlFeSi phase solidification.

Compressive performance and crack propagation in Al alloy/Ti{sub 2}AlC composites

Energy Technology Data Exchange (ETDEWEB)

Hanaor, D.A.H., E-mail: dorian.hanaor@sydney.edu.au [School of Civil Engineering, University of Sydney, Sydney, NSW 2006 (Australia); Hu, L. [Ames Laboratory, U.S. Department of Energy, Ames, Iowa 50011 (United States); Kan, W.H.; Proust, G. [School of Civil Engineering, University of Sydney, Sydney, NSW 2006 (Australia); Foley, M. [Australian Centre for Microscopy and Microanalysis, University of Sydney, Sydney, NSW 2006 (Australia); Karaman, I.; Radovic, M. [Department of Materials Science and Engineering, Texas A& M University, College Station, TX 77843 (United States)

2016-08-30

Composite materials comprising a porous Ti{sub 2}AlC matrix and Al 6061 alloy were fabricated by a current-activated pressure assisted melt infiltration process. Coarse, medium and fine meso-structures were prepared with Al alloy filled pores of differing sizes. Materials were subjected to uniaxial compressive loading up to stresses of 668 MPa, leading to the failure of specimens through crack propagation in both phases. As-fabricated and post-failure specimens were analysed by X-ray microscopy and electron microscopy. Quasi-static mechanical testing results revealed that compressive strength was the highest in the fine structured composite materials. While the coarse structured specimens exhibited a compressive strength of 80% relative to this. Reconstructed micro-scale X-ray tomography data revealed different crack propagation mechanisms. Large planar shear cracks propagated throughout the fine structured materials while the coarser specimens exhibited networks of branching cracks propagating preferentially along Al alloy-Ti{sub 2}AlC phase interfaces and through shrinkage pores in the Al alloy phase. Results suggest that control of porosity, compensation for Al alloy shrinkage and enhancement of the Al alloy-Ti{sub 2}AlC phase interfaces are key considerations in the design of high performance metal/Ti{sub 2}AlC phase composites.

Phase equilibria and crystalline structure of compounds in the Lu-Al and Lu-Cu-Al systems

International Nuclear Information System (INIS)

Kuz'ma, Yu.B.; Stel'makhovich, B.M.; Galamushka, L.I.

1992-01-01

Phase equilibria and crystal structure of compounds in Lu-Al and Lu-Cu-Al systems were studied. Existence of Lu 2 Al compound having the structure of the PbCl 2 type is ascertained. Diagram of phase equilibria of Lu-Cu-Al system at 870 K is plotted. Compounds Lu 2 (Cu,Al) 17 (the Th 2 Zn 17 type structure), Lu(Cu,Al) 5 (CaCu 5 type structure), Lu 6 (Cu,Al) 23 (Th 6 Mn 23 type structure) and ∼ LuCuAl 2 have been prepared for the first time. Investigation of component interaction in Lu-Cu-Al system shows that the system is similar to previously studied systems Dy-Cu-Al and Er-Cu-Al. The main difference consists in the absence of LuCuAl 3 compound with rhombic structure of the CeNi 2+x Sb 2-x type in the system investigated

Al Qaeda in the Arabian Peninsula (AQAP): An Al Qaeda Affiliate Case Study

Science.gov (United States)

2017-10-01

Villarosa, Al-Qaeda in Yemen, Carnegie Endowment, July 7, 2009, http://carnegieendowment.org/2009/07/07/Al-Qaeda-in-yemen- event-1372. 53 Brian Whitaker...73 Khaled Fattah, “Yemen’s Insecurity Dilemma,” Yemen Times, February 11, 2014, http:// carnegie -mec.org/2014/02...Johnsen, and Shari Villarosa, “Al-Qaeda in Yemen.” Carnegie Endowment. July 7, 2009. http://carnegieendowment.org/2009/07/07/Al-Qaeda-in- yemen-event

The ionising radiations: a daily reality Las radiaciones ionizantes: una realidad cotidiana

Directory of Open Access Journals (Sweden)

Eduardo Gallego Díaz

2010-12-01

Full Text Available This paper introduce the nature of the radioactive substances and of the ionising radiation, the effects that they cause on the matter and the available media for their detection and measure, as well as the sources of natural radiation, to which the human being are exposed. Next, in the more detailed part of this paper, it is described the wide range of ionising radiations uses in: medicine, agriculture, earth sciences, biology and in some other scientific fields, that allow to pose its impact in the perspective of facing the ones from natural sources. The article concludes that for avoiding damages it is necessary proper protection against the radioactive substances, but avoiding limitation their beneficial uses in the various ranges described. For finishing this paper, the basic principles of radiation protection are described, due to they are the its principal aim.Este trabajo introduce la naturaleza de las sustancias radiactivas y de la radiación ionizante, los efectos que causa sobre la materia y los medios disponibles para su detección y medida, así como las fuentes de radiación naturales a las que los seres humanos estamos expuestos. Seguidamente, en el apartado más amplio del trabajo, se describen las múltiples aplicaciones de las radiaciones ionizantes en la medicina, la agricultura, la industria, las ciencias de la tierra, la biología y otras ramas, lo que permite poder poner su impacto en perspectiva frente al de las fuentes naturales. La tesis final del artículo es que para evitar sufrir daños resulta necesario protegerse adecuadamente de los efectos nocivos de la radiación y las sustancias radiactivas, pero sin limitar innecesariamente su utilización beneficiosa en los numerosos ámbitos descritos. Ese es el objetivo fundamental de la protección radiológica, cuyos principios básicos se presentan para terminar.

Formation of epitaxial Al 2O 3/NiAl(1 1 0) films: aluminium deposition

Science.gov (United States)

Lykhach, Y.; Moroz, V.; Yoshitake, M.

2005-02-01

Structure of epitaxial Al 2O 3 layers formed on NiAl(1 1 0) substrates has been studied by means of reflection high-energy electron diffraction (RHEED). The elucidated structure was compared to the model suggested for 0.5 nm-thick Al 2O 3 layers [K. Müller, H. Lindner, D.M. Zehner, G. Ownby, Verh. Dtsch. Phys. Ges. 25 (1990) 1130; R.M. Jaeger, H. Kuhlenbeck, H.J. Freund, Surf. Sci. 259 (1991) 235]. The stepwise growth of Al 2O 3 film, involving deposition and subsequent oxidation of aluminium onto epitaxial 0.5 nm-thick Al 2O 3 layers, has been investigated. Aluminium was deposited at room temperature, whereas its oxidation took place during annealing at 1070 K. The Al 2O 3 thickness was monitored by means of Auger electron spectroscopy (AES). It was found that Al 2O 3 layer follows the structure of 0.5 nm thick Al 2O 3 film, although a tilting of Al 2O 3(1 1 1) surface plane with respect to NiAl(1 1 0) surface appeared after Al deposition.

Amyotrophic lateral sclerosis (ALS)

Science.gov (United States)

Lou Gehrig disease; ALS; Upper and lower motor neuron disease; Motor neuron disease ... One out of 10 cases of ALS is due to a genetic defect. The cause is unknown in most other cases. In ALS, motor nerve cells (neurons) waste away ...

Pemikiran Politik al-Shawkânî dalam Fath al-Qadîr

Directory of Open Access Journals (Sweden)

Yusuf Hanafi

2015-09-01

Full Text Available Muhammad b. ‘Alî Muhammad b. ‘Abd Allâh al-Shawkânî al-San‘ânî. He was born in the Hijrah in Shawkân village, Yemen on Monday 28 Dhû al-Qa‘dah 1172 H and died on Tuesday, 27 Jumâd al-Akhîr 1250 H at the age about 78 years. Al-Shawkânî grew up in the San‘a city, it is the capital of the republic of Yemen now. He study first time about religion from his father, then from renowed scholars in San‘a and its surrounding, he was known as a scolar who mastered the various branches of religious sciences. Such as tafsîr, h}adîth, fiqh, us}ûl al-fiqh, history, science of kalâm, philosophy, balâghah, mant}iq etc. the main issue in this article is how political thought in the book of tafsir Fath al-Qadîr is the work of Shawkânî. At the end of article, the authors found that the intended political thinking in the study of Fath al-Qadîr is about constitutional ideas. These ideas about the constitution is limited to the concept of leadership and deliberation, the concept of the right of citizen to obtain justice, and the concept pf the right of citizens to live association and assembly

Oxidation behavior of Al/Cr coating on Ti2AlNb alloy at 900 °C

Science.gov (United States)

Yang, Zhengang; Liang, Wenping; Miao, Qiang; Chen, Bowen; Ding, Zheng; Roy, Nipon

2018-04-01

In this paper, the Al/Cr coating was fabricated on the surface of Ti2AlNb alloy via rf magnetron sputtering and double glow treatment to enhance oxidation resistance. The protective coating with an outer layer of Al and inner layer of Cr has great bonding strength due to the in-diffusion of Cr and the inter-diffusion between Al and Cr to form Al-Cr alloyed layer which has great hardness. Acoustic emission curve which was detected via WS-2005 scratch tester indicates the bonding strength between Al/Cr coating and substrate is great. Morphology of Ti2AlNb alloy with Al/Cr coating after scratch test shows that the scratch is smooth without disbanding, and the depth and breadth of scratch are changed uniformly. The mass change was reduced after oxidation test due to the Al/Cr protective coating. Isothermal oxidation test at 900 °C was researched. Results indicate that Al/Cr coating provided oxidation resistance of Ti2AlNb alloy with prolonged air exposure at 900 °C. Al2O3 was detected by XRD patterns and SEM images, and was formed on the surface of Ti2AlNb alloy to protect substrate during oxidation test. A certain content of Cr is beneficial for the formation of Al2O3. Besides, Cr2O3 was produced under Al2O3 by outward diffusion of Cr to protect substrate sequentially, no cracks were discovered on Al/Cr protective coating. The process of Ti outward diffusion into surface was suppressive due to integration of Cr-Ti and Al-Ti intermetallics. A steady, adherent and continuous coated layer of Al/Cr on Ti2AlNb alloy increases oxidation resistance.

¿COLOMBIA DEBE APOSTARLE AL SOFTWARE LIBRE, AL DE FUENTE ABIERTA O AL PROPIETARIO?

Directory of Open Access Journals (Sweden)

Luis Alberto Girón Murillo

2014-06-01

Full Text Available Es complejo para gestores y administradores conocer las implicaciones que la adopción de modelos de desarrollo de software tendría para una región. Este artículo ofrece una evaluación de las implicaciones dinámicas que para el desarrollo de software de una región tendría el apostar de forma excluyente al software libre, al software de fuente abierta y al software propietario. Se desarrolló un modelo de simulación en Vensim de la dinámica de sistemas en donde se evaluaron 3 escenarios: uno en donde se adopta de forma excluyente el software libre, uno en donde se adopta el software propietario y uno en donde se adopta el software de fuente abierta. Se ofrecen descripciones y explicaciones de los resultados que sugieren las potencialidades de cada uno de los modelos de desarrollo evaluados.

Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer

International Nuclear Information System (INIS)

Honarpisheh, M.; Asemabadi, M.; Sedighi, M.

2012-01-01

Highlights: ► We studied explosive-welded Al/Cu/Al multilayer. ► We investigated heat treatment influence on the bond properties of Al/Cu/Al. ► Intermetallic compounds were studied using the SEM, OM and EDS analysis. ► Variations of hardness in the thickness were investigated using micro-hardness. ► Intermetallic phases such as AlCu 3 and Al 2 C create at the interface of Al/Cu/Al. -- Abstract: In this study, an Al/Cu/Al multilayer sheet was fabricated by explosive welding process and the effects of annealing temperature on the interfacial properties of explosively bonded Al/Cu bimetal have been investigated. For this purpose, hardness changes along the thickness of the samples have been measured, and the thickness and type of intermetallic compounds formed at the joining interface have been explored by means of optical microscopy (OM), scanning electron microscopy (SEM) and also energy dispersive spectroscopy (EDS). The obtained results indicate that, with the increase of the annealing temperature, the thickness of intermetallic compounds has increased and the amount of hardness along the thickness of the joining interface has diminished. In the annealed sample at 400 °C for 30 min, it was observed that intermetallic layers have formed at the interface of Al/Cu bimetals. These layers consist of the intermetallic compounds AlCu 3 , Al 2 Cu and AlCu, and their thickness gets to about 5 μm at some points. The examinations performed by the SEM, following the Vickers micro-hardness test, indicated the existence of a number of microcracks at the top and bottom interface of the sample annealed at 400 °C. This shows the formation of brittle intermetallic compounds at the joining interface, and also indicates the low ductility of these compounds.

Desentrañar sucesos, evaluar sujetos y producir verdades para 'restituir derechos de niños'. Un abordaje desde las prácticas cotidianas de intervención en un dispositivo estatal de protección de la niñez del conurbano bonaerense

Directory of Open Access Journals (Sweden)

Agustín Barna

2015-07-01

Full Text Available Uno de los elementos más ponderados de las recientes transformaciones legislativas referidas a la infancia y sus derechos, ha sido la “desjudicialización” de las intervenciones de origen “asistencial”. Se ha argumentado que dicha transformación supuso una merma en la arbitrariedad a la que estaban sometidos los niños y familias de sectores populares en los ámbitos tribunalicios. En el presente trabajo, se busca suspender tal asunción para avanzar en las reflexiones sobre sus implicancias en la dimensión cotidiana de las prácticas estatales destinadas a “restituir derechos”. Para ello indago aquí, desde una perspectiva etnográfica, en las actuaciones desplegadas por agentes de un Servicio Local de Protección de Derechos de Niños en un municipio del conurbano bonaerense en contextos marcados por la desigualdad social. En particular aquellas desplegadas frente a situaciones problemáticas de niños que se encuentran atravesadas por prácticas adultas, habitualmente interpretadas como delictuosas -por ejemplo maltrato infantil o abuso sexual-.

DISCURSOS ÉTICO-POLÍTICOS Y PRÁCTICAS SOCIALES COTIDIANAS EN LAS COMUNIDADES ZAPATISTAS

Directory of Open Access Journals (Sweden)

Citlalli Mendoza Sánchez

2015-12-01

Full Text Available RESUMENEl movimiento zapatista ha tenido un gran entramado de prácticas sociales y discursos que remiten a cuestiones de índole ético-política. En nuestra investigación nos centramos en la descripción, interpretación y análisis de estos. Se utilizó la metodología cualitativa recurriendo a la revisión documental y se realizó un ejercicio etnográfico en el que se empleó la técnica de observación participante; los datos obtenidos se procesaron en base al análisis interpretacional. La noción de práctica social se abordó desde la perspectiva de Pierre Bourdieu y su concepto de habitus así como desde la teoría de la estructuración de Anthony Giddens. La noción de discurso es conceptualizada como una práctica social. En la investigación se describe como el entramado de prácticas y discursos ético-­políticos en las comunidades zapatistas son posibilitadores de nuevas acciones y que ayudan a la continuidad y las transformaciones del movimiento ético­-político.

NMR evidence for Co-Al-Co molecular groups trapped in cages of Co4Al13

International Nuclear Information System (INIS)

Jeglic, P.; Heggen, M.; Feuerbacher, M.; Bauer, B.; Gille, P.; Haarmann, F.

2009-01-01

We present the results of 27 Al nuclear magnetic resonance (NMR) experiments on the phase Co 4 Al 13 . These results are compared to a recent structure model [1], which demonstrates a unique bonding for Al atoms in the Co-Al-Co molecular groups. In our measurement, two 27 Al signals were identified. The first one originates from Al atoms forming cages. The second signal corresponds to Al sites with exceptionally large almost axially symmetric quadrupole coupling. This finding is in perfect agreement with isolated Co-Al-Co molecular groups in accordance to Ref. [1].

The Y-Cu-Al system

International Nuclear Information System (INIS)

Krachan, T.; Stel'makhovych, B.; Kuz'ma, Yu.

2003-01-01

The phase diagram of the Y-Cu-Al system at 820 K has been constructed using X-ray powder diffraction. The existence of earlier known ternary aluminides has been confirmed and their homogeneity regions and atomic distributions in the structures have been determined: YCu 4.6-4.0 Al 7.4-8.0 (ThMn 12 -type R I =0.049), Y 2 Cu 12.0-10.5 Al 5.0-6.5 (Th 2 Zn 17 -type R I =0.092), YCu 1.0-1.1 Al 1.0-0.9 (Fe 2 P-type R I =0.068). It has been shown that the structure of Y(Cu,Al) 3 is characterized by an ordered distribution of the Cu and Al atoms and it should be referred as Ca 3 Cu 2 Al 7 structure type (R I =0.060) besides the PuNi 3 structure type with statistical occupancies of the smaller atoms. At the investigated temperature the compound YCu 1.0-0.25 Al 3.0-3.75 (BaAl 4 -type) was not observed. However, we found the ternary aluminide with composition Y 3 Cu 2.7-2.0 Al 8.3-9.0 and related La 3 Al 11 -type (space group Immm, a=0.4192-0.4228, b=1.2423-1.2557, c=0.9812-0.9895 nm, R I =0.069). The compounds YCu 6.8 Al 4.2 (space group Fddd, Tb(Cu 0.58 Al 0.42 ) 11 -type, a=1.42755, b=1.48587, c=0.65654 nm, R I =0.062) and YCu 6.5 Al 4.5 (space group I4 1 /amd, BaCd 11 -type, a=1.02774, c=0.65838 nm, R I =0.071) have been found and structurally refined for the first time

Aspergillus baeticus sp. nov. and Aspergillus thesauricus sp. nov., two species in section Usti from Spanish caves.

Science.gov (United States)

Nováková, Alena; Hubka, Vit; Saiz-Jimenez, Cesareo; Kolarik, Miroslav

2012-11-01

Two novel species of Aspergillus that are clearly distinct from all known species in section Usti were revealed during a study of microfungal communities in Spanish caves. The novel species identified in this study and additional species of Aspergillus section Usti are associated with places and substrates related to human activities in caves. Novel species are described using data from four loci (ITS, benA, caM and rpb2), morphology and basic chemical and physiological analyses. Members of the species Aspergillus thesauricus sp. nov. were isolated from various substrates, including decaying organic matter, cave air and cave sediment of the Cueva del Tesoro Cave (the Treasure cave); the species is represented by twelve isolates and is most closely related to the recently described Aspergillus germanicus. Members of the species Aspergillus baeticus sp. nov. were isolated from cave sediment in the Gruta de las Maravillas Cave (the Grotto of the Marvels); the species is represented by two isolates. An additional isolate was found in the Cueva del Tesoro Cave and in the Demänovská Peace Cave (Slovakia), suggesting a potentially wide distribution of this micro-organism. The species is related to Aspergillus ustus and Aspergillus pseudoustus. Both species were unable to grow at 37 °C, and a weakly positive, light greenish yellow Ehrlich reaction was observed in A. thesauricus. Unique morphological features alone are sufficient to distinguish both species from related taxa.

España y Cuba. Cien años de relaciones financieras

Directory of Open Access Journals (Sweden)

Inés ROLDÁN DE MONTAUD

2010-02-01

Full Text Available RESUMEN: Desde la pérdida del imperio continental americano, Cuba se convierte en el territorio colonial de mayor importancia para la metrópoli. Mercado preferencial para la producción española y fuente de capitales que ayudó a paliar el déficit del Tesoro peninsular, las páginas siguientes se dedican a estudiar las diferentes etapas por las que atravesaron las relaciones financieras entre metrópoli y colonia a lo largo del siglo XIX. Estudio centrado en el aspecto institucional, es decir, en las relaciones entre los Tesoros y por tanto en la especial configuración de la Hacienda colonial y la concepción y estructura del sistema presupuestario. Palabras Clave: España, Cuba, Siglo XIX, Relaciones financieras, Hacienda colonial, Presupuestos. ABSTRACT: After metropolis lost its empire on the American continent, Cuba became its most important colonial territory and a preferential market for Spanish production as well as a source of capital which helped to mitigate the deficit in the Spanish Treasury. The pages that follow study the different stages through which the financial relations between the metropolis and the colony passed during the 19th century. This study focuses on the institutional aspect, i.e., on the relations between the treasuries and therefore on the special configuration of the colonial Treasuty and the conception and structure of the budgetary system. Key words: Spain, Cuba 19th Century, Financial Relation, Colonial Treasury, Budgets.

Preparation, deformation, and failure of functional Al-Sn and Al-Sn-Pb nanocrystalline alloys

Science.gov (United States)

Noskova, N. I.; Vil'Danova, N. F.; Filippov, Yu. I.; Churbaev, R. V.; Pereturina, I. A.; Korshunov, L. G.; Korznikov, A. V.

2006-12-01

Changes in the structure, hardness, mechanical properties, and friction coefficient of Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb (wt %) alloys subjected to severe plastic deformation by equal-channel angular pressing (with a force of 40 tonne) and by shear at a pressure of 5 GPa have been studied. The transition into the nanocrystalline state was shown to occur at different degrees of plastic deformation. The hardness exhibits nonmonotonic variations, namely, first it increases and subsequently decreases. The friction coefficient of the Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys quenched from the melt was found to be 0.33; the friction coefficients of these alloys in the submicrocrystalline state (after equal-channel angular pressing) equal 0.24, 0.32, and 0.35, respectively. The effect of disintegration into nano-sized powders was found to occur in the Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys after severe plastic deformation to ɛ = 6.4 and subsequent short-time holding.

Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet

International Nuclear Information System (INIS)

Cao, J.; Song, X.G.; Wu, L.Z.; Qi, J.L.; Feng, J.C.

2012-01-01

The Al/Ni multilayers were characterized and diffusion bonding of TiAl intermetallics to TiC cermets was carried out using the multilayers. The microstructure of Al/Ni multilayers and TiAl/TiC cermet joint was investigated. The layered structures consisting of a Ni 3 (AlTi) layer, a Ni 2 AlTi layer, a (Ni,Al,Ti) layer and a Ni diffusion layer were observed from the interlayer to the TiAl substrate. Only one AlNi 3 layer formed at the multilayer/TiC cermet interface. The reaction behaviour of Al/Ni multilayers was characterized by means of differential scanning calorimeter (DSC) and X-ray diffraction. The initial exothermic peak of the DSC curve was formed due to the formation of Al 3 Ni and Al 3 Ni 2 phases. The reaction sequence of the Al/Ni multilayers was Al 3 Ni → Al 3 Ni 2 → AlNi → AlNi 3 and the final products were AlNi and AlNi 3 phases. The shear strength of the joint was tested and the experimental results suggested that the application of Al/Ni multilayers improved the joining quality. - Highlights: ► Diffusion bonding of TiAl to TiC cermet was realized using Al/Ni multilayer. ► The reaction sequence of the Al/Ni multilayers was Al 3 Ni → Al 3 Ni 2 → AlNi → AlNi 3 . ► The interfacial microstructure of the joint was clarified. ► The application of Al/Ni multilayers improved the joining quality.

Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating

Science.gov (United States)

Fu, Guangyan; Wu, Yongzhao; Liu, Qun; Li, Rongguang; Su, Yong

2017-03-01

The 1Cr18Ni9Ti stainless steel with Al-Si/Al-Si-Cr coatings is prepared by slurry process and vacuum diffusion, and the hot corrosion behavior of the stainless steel with/without the coatings is studied under the condition of Na2SO4 film at 950 °C in air. Results show that the corrosion kinetics of stainless steel, the stainless steel with Al-Si coating and the stainless steel with Al-Si-Cr coating follow parabolic laws in several segments. After 24 h corrosion, the sequence of the mass gain for the three alloys is the stainless steel with Al-Si-Cr coating coating coating. The corrosion products of the three alloys are layered. Thereinto, the corrosion products of stainless steel without coating are divided into two layers, where the outside layer contains a composite of Fe2O3 and FeO, and the inner layer is Cr2O3. The corrosion products of the stainless steel with Al-Si coating are also divided into two layers, of which the outside layer mainly consists of Cr2O3, and the inner layer is mainly SiO2. The corrosion film of the stainless steel with Al-Si-Cr coating is thin and dense, which combines well with substrate. Thereinto, the outside layer is mainly Cr2O3, and the inside layer is Al2O3. In the matrix of all of the three alloys, there exist small amount of sulfides. Continuous and protective films of Cr2O3, SiO2 and Al2O3 form on the surface of the stainless steel with Al-Si and Al-Si-Cr coatings, which prevent further oxidation or sulfide corrosion of matrix metals, and this is the main reason for the much smaller mass gain of the two alloys than that of the stainless steel without any coatings in the 24 h hot corrosion process.

Quality of life improvement in people with spinal cord injury: The transition from rehabilitation hospital to the everyday life from users’ perspective La mejora de la calidad de vida de las personas con lesión medular: La transición del centro rehabilitador a la vida cotidiana desde la perspectiva de los usuarios

Directory of Open Access Journals (Sweden)

Mariona Gifre Monreal

2010-07-01

Full Text Available Returning process to the everyday life context for a person with spinal cord injury after its Hospitalization period has been defined as a moment of difficulties and personal challenges. 
In this article we show the most prominent factors contributing to improve quality of life from the perspective of the injured people. Two discussion groups, one formed by 12 people with paraplegia, and another formed by 6 people with tetraplejia, have been carried out. Content analysis carried out indicates that participants related quality of life quality once leaving the rehabilitation hospital with to dimensions: a closer context need of attention and, b real world preparation. On conclusion, to design integral rehabilitation programme, physical rehabilitation, learning abilities to allow maximum autonomy and, family assessment must be included. 

El proceso de retorno a la vida cotidiana para una persona con lesión medular después de su periodo de hospitalización, se ha definido como un momento lleno de dificultades, ambigüedades y retos personales.

En este trabajo nos planteamos identificar los factores más relevantes que contribuyen a mejorar su calidad de vida, desde la perspectiva de las propias personas afectada. Para ello, hemos realizado dos grupos de discusión: uno formado por 12 personas con paraplejia y otro formado por 6 personas con tetraplejia. El análisis de contenido realizado con las transcripciones de los dos grupos indica que, para los participantes existen dos dimensiones relacionadas con el nivel de calidad de vida una vez salen del centro de rehabilitación: a necesidad de atención al entorno más próximo y b preparación para el mundo real. Como conclusión señalamos la necesidad de incluir la atención integral a las personas con lesión medular desde los diferentes niveles asistenciales del territorio.

Gate length scaling effect on high-electron mobility transistors devices using AlGaN/GaN and AlInN/AlN/GaN heterostructures.

Science.gov (United States)

Liao, S Y; Lu, C C; Chang, T; Huang, C F; Cheng, C H; Chang, L B

2014-08-01

Compared to AlGaN/GaN HEMT with 0.15 μm T-gate length, the AlInN/AlN/GaN one exhibits much higher current density and transconductance of 1558 mA/mm at Vd = 2 V and 330 mS/mm, respectively. The high extrinsic ft and fmax of 82 GHz and 70 GHz are extracted from AlInN/AlN/GaN HEMT. Besides, we find that the transconductance roll-off is significant in AlGaN/GaN, but largely improved in AlInN/AlN/GaN HEMT, suggesting that the high carrier density and lattice-matched epitaxial heterostructure is important to reach both large RF output power and high operation frequency, especially for an aggressively gate length scaling.

A new approach to development drilling in Trinidad-Tesoro

Energy Technology Data Exchange (ETDEWEB)

Persad, K.M.

1972-01-01

A detailed correlation of the Upper Cruse by means of electric logs from wells in Central Palo Seco field in S. Trinidad was done in an attempt to trace sands which have yielded very high oil productions, but which shaled out completely, very rapidly, in seemingly random directions. A new approach was attempted, namely, using the S.P. shapes from the logs to identify depositional environments of the sands, with a view to determining the paleogeography of the area. This study has revealed a meander belt channel running from west to east and ending in a delta, with several distributary chanels. It has also been possible to distinguish areas of lagoonal or pro-deltaic deposition. On the basis of this study, one well P.S. 816, was drilled but found only part of the channel. Another location has been recommended, but has not yet been drilled. If this well finds the main channel, a dipmeter will be run to help in the siting of new locations.

VIVENCIA DE ESTUDIANTES DE ENFERMERÍA DE LA TRANSICIÓN A LA PRÁCTICA PROFESIONAL: UN ENFOQUE FENOMENOLÓGICO SOCIAL

Directory of Open Access Journals (Sweden)

Antonia Vollrath Ramírez

2011-01-01

Full Text Available La finalidad de este estudio fue comprender el significado de la experiencia de aprendizaje de transición del estudiante de enfermería, y el significado de sus expectativas del aprendizaje para su futura práctica profesional. Optamos por una investigación cualitativa, con enfoque fenomenológico social de Alfred Shutz, para lo cual se entrevistó a diez internos de enfermería. Del análisis comprensivo del tipo vivido, fue identificado que el estudiante siente que al asumir responsabilidades experimenta sufrimiento e inseguridad por falta de conocimiento, no confía en sus habilidades y se siente solo; pero a medida que percibe apoyo adquiere confianza, autonomía y se integra al equipo. Siente además que la enfermera es importante para la transición. Se lograron comprender en el proceso de transición los motivos para y los motivos por qué de sus acciones, y cómo se integra al mundo de la vida cotidiana de un determinado grupo social en un determinado tiempo y espacio.

Some aspects of anelastic and microplastic creep of pure Al and two Al-alloys

Energy Technology Data Exchange (ETDEWEB)

Sgobba, S. (Lab. de Metallurgie Mecanique, Dept. des Materiaux, Ecole Polytechnique Federale de Lausanne (Switzerland)); Kuenzi, H.U. (Lab. de Metallurgie Mecanique, Dept. des Materiaux, Ecole Polytechnique Federale de Lausanne (Switzerland)); Ilschner, B. (Lab. de Metallurgie Mecanique, Dept. des Materiaux, Ecole Polytechnique Federale de Lausanne (Switzerland))

1993-11-01

Anelastic creep of pure Al, commercial Al-Cu and a binary Al-Cu alloy has been measured at room temperature by means of a high resolution laser interferometer. The irreversible component of the deformation was also quantified from measurements of the anelastic creep recovery. The dependence of the deformation-time curves on thermal treatment and cold work is analyzed. The mechanisms responsible for the room temperature anelastic creep are discussed. Materials loaded below their elastic limit can present either a pure anelastic behavior (commercial Al-Cu) or additional viscoelastic creep (pure Al, high purity Al-Cu). For commercial Al-Cu, the presence of an irreversible deformation appears to be mainly related to the state of the surface. A viscoelastic after effect has been measured for this alloy after a Cu-electroplating treatment. As a typical result for room temperature creep, the irreversible deformation depends logarithmically on load time. (orig.).

Some aspects of anelastic and microplastic creep of pure Al and two Al-alloys

International Nuclear Information System (INIS)

Sgobba, S.; Kuenzi, H.U.; Ilschner, B.

1993-01-01

Anelastic creep of pure Al, commercial Al-Cu and a binary Al-Cu alloy has been measured at room temperature by means of a high resolution laser interferometer. The irreversible component of the deformation was also quantified from measurements of the anelastic creep recovery. The dependence of the deformation-time curves on thermal treatment and cold work is analyzed. The mechanisms responsible for the room temperature anelastic creep are discussed. Materials loaded below their elastic limit can present either a pure anelastic behavior (commercial Al-Cu) or additional viscoelastic creep (pure Al, high purity Al-Cu). For commercial Al-Cu, the presence of an irreversible deformation appears to be mainly related to the state of the surface. A viscoelastic after effect has been measured for this alloy after a Cu-electroplating treatment. As a typical result for room temperature creep, the irreversible deformation depends logarithmically on load time. (orig.)

A study of ion damage in Al, Al/Cu and Al/Ag

International Nuclear Information System (INIS)

Marikar, P.

1979-06-01

Specimens of pure aluminium, aluminium-copper and aluminium-silver have been irradiated with 20 keV helium ions and/or 100 keV aluminium ions and the nature of the damage assessed using transmission electron microscopy. Irradiation with 20 keV helium ions to a dose of 2.7 x 10 15 ions cm -2 results in the formation of interstitial loops and helium gas bubbles. The helium bubbles were detectable only after annealing at a high temperature following irradiation. When the helium preinjected aluminium specimens were irradiated with 100 keV Al + ions to a dose of 84 dpa at temperatures above 150 0 C, voids were observed to form. At a lower dose of 64 dpa, only a high density of dislocation loops was observed. Al-1 wt% Cu alloy containing partially coherent theta' precipitates resists void formation to a considerable extent, and Al-10 wt% Ag alloy containing coherent G.P. zones offers complete resistance to both dislocation loop nucleation and void formation. The experimental results are discussed in the light of the current theories of irradiation induced damage in metals. The importance of the dislocation-sink efficiency for point defects, the gaseous impurity and the alloying elements in determining void formation is highlighted. (author)

Interdiffusion between U(Mo,Pt) or U(Mo,Zr) and Al or Al A356 alloy

International Nuclear Information System (INIS)

Komar Varela, C.; Mirandou, M.; Arico, S.; Balart, S.; Gribaudo, L.

2009-01-01

Solid state reactions in chemical diffusion couples U-7 wt.%Mo-0.9 wt.%Pt/Al at 580 deg. C and U-7 wt.%Mo-0.9 wt.%Pt/Al A356 alloy, U-7 wt.%Mo-1 wt.%Zr/Al and U-7 wt.%Mo-1 wt.%Zr/Al A356 alloy at 550 deg. C were characterized. Results were obtained from optical and scanning electron microscopy, electron probe microanalysis and X-ray diffraction. The UAl 3, UAl 4 and Al 20 Mo 2 U phases were identified in the interaction layers of γU(Mo,Pt)/Al and γU(Mo,Zr)/Al diffusion couples. Al 43 Mo 4 U 6 ternary compound was also identified in γU(Mo,Zr)/Al due to the decomposition of γU(Mo,Zr) phase. The U(Al,Si) 3 and U 3 Si 5 phases were identified in the interaction layers of γU(Mo,Pt)/Al A356 and γU(Mo,Zr)/Al A356 diffusion couples. These phases are formed due to the migration of Si to the interaction layer. In the diffusion couple U(Mo,Zr)/Al A356, Zr 5 Al 3 phase was also identified in the interaction layer. The use of synchrotron radiation at Brazilian Synchrotron Light Laboratory (LNLS, CNPq, Campinas, Brazil) was necessary to achieve a complete crystallographic characterization.

CuAlO2 and CuAl2O4 thin films obtained by stacking Cu and Al films using physical vapor deposition

Science.gov (United States)

Castillo-Hernández, G.; Mayén-Hernández, S.; Castaño-Tostado, E.; DeMoure-Flores, F.; Campos-González, E.; Martínez-Alonso, C.; Santos-Cruz, J.

2018-06-01

CuAlO2 and CuAl2O4 thin films were synthesized by the deposition of the precursor metals using the physical vapor deposition technique and subsequent annealing. Annealing was carried out for 4-6 h in open and nitrogen atmospheres respectively at temperatures of 900-1000 °C with control of heating and cooling ramps. The band gap measurements ranged from 3.3 to 4.5 eV. Electrical properties were measured using the van der Pauw technique. The preferred orientations of CuAlO2 and CuAl2O4 were found to be along the (1 1 2) and (3 1 1) planes, respectively. The phase percentages were quantified using a Rietveld refinement simulation and the energy dispersive X-ray spectroscopy indicated that the composition is very close to the stoichiometry of CuAlO2 samples and with excess of aluminum and deficiency of copper for CuAl2O4 respectively. High resolution transmission electron microscopy identified the principal planes in CuAlO2 and in CuAl2O4. Higher purities were achieved in nitrogen atmosphere with the control of the cooling ramps.

Three-Dimensional FIB/EBSD Characterization of Irradiated HfAl3-Al Composite

Energy Technology Data Exchange (ETDEWEB)

Hua, Zilong; Guillen, Donna Post; Harris, William; Ban, Heng

2016-09-01

A thermal neutron absorbing material, comprised of 28.4 vol% HfAl3 in an Al matrix, was developed to serve as a conductively cooled thermal neutron filter to enable fast flux materials and fuels testing in a pressurized water reactor. In order to observe the microstructural change of the HfAl3-Al composite due to neutron irradiation, an EBSD-FIB characterization approach is developed and presented in this paper. Using the focused ion beam (FIB), the sample was fabricated to 25µm × 25µm × 20 µm and mounted on the grid. A series of operations were carried out repetitively on the sample top surface to prepare it for scanning electron microscopy (SEM). First, a ~100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. Last, the surface was scanned by Electron Backscattering Diffraction (EBSD) to obtain the two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three-dimensional models were obtained from samples of the original and post-irradiation HfAl3-Al composite respectively, from which the most significant microstructural change caused by neutron irradiation apparently is the size reduction of both HfAl3 and Al grains. The possible reason is the thermal expansion and related thermal strain from the thermal neutron absorption. This technique can be applied to three-dimensional microstructure characterization of irradiated materials.

The Genyornis Egg: Response to Miller et al.'s commentary on Grellet-Tinner et al., 2016

Science.gov (United States)

Grellet-Tinner, Gerald; Spooner, Nigel A.; Handley, Warren D.; Worthy, Trevor H.

2017-04-01

Williams (1981) and Williams and Rich (1991) attributed Australian Quaternary fossil eggshell that differed from that of emu Dromaius novaehollandiae to the extinct bird Genyornis newtoni without any osteological or embryonic support. Such association by proximity or abundance mirrors the case of the mistaken association of oviraptor eggs to Protoceratops in the 1920's by Andrews (Grellet-Tinner and Makovicky, 2006). No other candidate species was considered, and this attribution has been unchallenged and followed by everyone thereafter. Much research has been done on this Australian eggshell, with one result being that the extinction of the parent of this eggshell is the most well documented for a taxon in Australia (e.g., Miller et al., 1999, 2005). Grellet-Tinner et al. (2016) raised several problems with the identity of the eggshell Williams (1981) attributed to Genyornis newtoni and suggested that extinct megapodes of the genus Progura were the more likely layer of this eggshell type, therein referred to as ;putative Genyornis oological material; (PGOM). Miller et al. (2017) challenged our hypothesis stating that ;Based on the dimensions of the reconstructed Spooner Egg,Grellet-Tinner et al. (2016)argue that PGOM is too small for a bird with the body mass estimated for Genyornis (168-275 kg) … …[and] …. None of the additional PGOM observations reported byGrellet-Tinner et al. (2016)are inconsistent with a Genyornis parent;. Here we take the opportunity to respond to their critique, the basis of which resolves into a few points, which we address in turn.

Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet

Energy Technology Data Exchange (ETDEWEB)

Cao, J., E-mail: cao_jian@hit.edu.cn [State Key Lab of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001 (China); Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150001 (China); Song, X.G. [State Key Lab of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001 (China); Wu, L.Z. [Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150001 (China); Qi, J.L.; Feng, J.C. [State Key Lab of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001 (China)

2012-02-29

The Al/Ni multilayers were characterized and diffusion bonding of TiAl intermetallics to TiC cermets was carried out using the multilayers. The microstructure of Al/Ni multilayers and TiAl/TiC cermet joint was investigated. The layered structures consisting of a Ni{sub 3}(AlTi) layer, a Ni{sub 2}AlTi layer, a (Ni,Al,Ti) layer and a Ni diffusion layer were observed from the interlayer to the TiAl substrate. Only one AlNi{sub 3} layer formed at the multilayer/TiC cermet interface. The reaction behaviour of Al/Ni multilayers was characterized by means of differential scanning calorimeter (DSC) and X-ray diffraction. The initial exothermic peak of the DSC curve was formed due to the formation of Al{sub 3}Ni and Al{sub 3}Ni{sub 2} phases. The reaction sequence of the Al/Ni multilayers was Al{sub 3}Ni {yields} Al{sub 3}Ni{sub 2} {yields} AlNi {yields} AlNi{sub 3} and the final products were AlNi and AlNi{sub 3} phases. The shear strength of the joint was tested and the experimental results suggested that the application of Al/Ni multilayers improved the joining quality. - Highlights: Black-Right-Pointing-Pointer Diffusion bonding of TiAl to TiC cermet was realized using Al/Ni multilayer. Black-Right-Pointing-Pointer The reaction sequence of the Al/Ni multilayers was Al{sub 3}Ni {yields} Al{sub 3}Ni{sub 2} {yields} AlNi {yields} AlNi{sub 3}. Black-Right-Pointing-Pointer The interfacial microstructure of the joint was clarified. Black-Right-Pointing-Pointer The application of Al/Ni multilayers improved the joining quality.

UNDERSTANDING THE MULTIDIMENSIONAL ISLAMIC FAITH THROUGH ‘ABD AL-GHANI AL-NABULUSI’S MYSTICAL PHILOSOPHY

Directory of Open Access Journals (Sweden)

Naoki Yamamoto

2013-12-01

Full Text Available This paper tries to present a new perspective on Islamic faith and Muslim identity to Muslim minorities who are challenged in practicing or following Islamic law in non-Islamic countries or non-Muslims in the contemporary world. It will uncover the multidimensional perspective of the concept of faith based on sin (dhanb and repentance (tawbah through the mystical philosophy of a Syrian scholar, Abd al-Ghani al-Nabulusi (d. 1143/1741 of the 18th century Ottoman Damascus who contributed to the field of Sufism particularly based on Ibn ‘Arabi’s thought of wahdat al-wujud (oneness of being and insan kamil (the perfect man. Nabulusi believes that anyone who lived during the inexistence of prophet’s revelation, inhabited an isolated place cut off from information about Islam, or lived in dar al-harb and did not make a hijra to dar al-islam could not be regarded as sinful in their deeds. However, faith in Allah is essential and infidelity is not forgiven regardless whether or not they live in dar al-islam or dar al-harb. Further, Nabulusi insists that true faith can be achieved by understanding the sin of existence; the ignorance of the difference of existence between Allah and men.  [Artikel ini menjelaskan identitas keberagamaan umat Islam minoritas yang dituntut untuk menerapkan syariat, namun harus hidup di negara non-muslim, dengan mendiskusikan perspektif multidimensional terhadap konsep dosa dan tobat seperti dikembangkan oleh Abd al-Ghanī al-Nabulusī (1143/1741, seorang sufi pemikir Syria, khususnya  wahdat al-wujūd dan insan kamil, yang hidup di masa kesultanan Usmani di Damaskus. Nabulusī berkeyakinan bahwa siapa saja yang hidup sebelum turunnya wahyu di masa Nabi, hidup di daerah terpencil yang tidak mengenal Islam, atau hidup di dar al-harb dan tidak hijrah ke dar al-islam, tidaklah dibebani dosa atas perbuatannya. Namun demikian, iman kepada Allah amatlah penting dan kekufuran tidaklah dimaafkan, baik seseorang tersebut hidup

PRECIPITATION HARDENING IN B2-ORDERED NiAl BY Ni2AlTiCOMPOUND

Institute of Scientific and Technical Information of China (English)

W.H. Tian; K. Ohishi; M. Nemoto

2001-01-01

Microstructural variations and correlated hardness changes in B2-ordered NiAl containing fine precipitation of Ni2AlTi have been investigated by means of transmission electron microscopy (TEM) and hardness tests. The amount of age hardening is not large as compared to the large microstructural variations during aging. TEM observations have revealed that the L21-type Ni2AlTi precipitates keep a lattice coherency with the NiAl matrix at the beginning of aging. By longer periods of aging Ni2AlTi precipitates lose their coherency and change their morphology to the globular ones surrounded by misfit dislocations. The temperature dependence of the yield strength of precipitate-containing B2-ordered NiAl was investigated by compression tests over the temperature range of 873-1273K. The fine precipitation of Ni2AlTi was found to enhance greatly the yield strength and the high-temperature strength is comparison with that of superalloy Mar-M200.``

Luche-Mundo: Una metodología para el abordaje responsable y dialógico del TDAH

OpenAIRE

Claro Tagle, Sebastián

2015-01-01

La alta prevalencia del TDAH y la falta de evidencia acerca de tratamientos que tengan un impacto a largo plazo, justifica diseñar y estudiar nuevas formas de abordaje. Luche-Mundo... buscando un tesoro es una metodología creada para abordar colaborativamente este problema. Se funda en un entendimiento de la situación-TDAH. Esto comprende el comportamiento del niño, la percepción de este comportamiento, el entorno y contexto sociocultural. Tras una revisión de las evidencias acerca de los tra...

Novela Orijinal: Huayna Capac

Directory of Open Access Journals (Sweden)

Felipe Pérez

1964-05-01

Full Text Available Confiado en la opinión de U, me atrevo a dar a la prensa la serie de novelas históricas que de algún tiempo atrás tengo escritas, i que pueden reputarse como un bosquejo de las últimas décadas del imperio de los Incas. U. me conoce demasiado para ver, en esta resolución mía, algo que parezca o sea pretensioso. Contribuir con mi óbolo a la formación del tesoro de nuestra naciente literatura -tal es mi pensamiento-.

La salud mental en situación de desastre. Una aproximación a sus particularidades

OpenAIRE

Roberto Anselmo Ramos Valverde

2015-01-01

A lo largo de la historia de la humanidad, la naturaleza ha demostrado el poder de los fenómenos naturales. El mundo antiguo fue testigo de catastróficos sismos que demolieron valiosos tesoros de la cultura universal. Hoy en día devastadores peligros hidrometeorológicos han venido impactando a países, cuyas poblaciones nunca antes habían visto tan impresionantes fuerzas. La escalada de desastres a nivel mundial sugiere fortalecer las capacidades de la reducción del riesgo de desastres para ab...

La función de la contabilidad. Una perspectiva socio-fenomenológica

Directory of Open Access Journals (Sweden)

Jairo Emiro Cuenú Cabezas

2013-07-01

Full Text Available El presente documento es un artículo de reflexión, que tiene como objetivo determinar la función de la contabilidad a partir de la sociología-fenomenológica del austriaco Alfred Schütz; el cual teoriza sobre el mundo de la vida cotidiana, explicando que existen tres clases de productos: los instrumentos, las marcas y las obras de arte. Desde Schütz, la contabilidad es un instrumento y una marca. Instrumento porque es útil para… y marca porque pretende recordar. Esto lo logró haciendo uso de la escritura y la arcilla, elementos que le permitieron manipular la memoria, ya que ésta no tiene la capacidad de recordar todas las acciones humanas. Con la sociología-fenomenológica, se determina que la contabilidad surgió por la poca capacidad de la memoria para recordar todas las acciones humanas realizadas por el hombre en el mundo de la vida cotidiana y en referencia a su zona económica de operación, zona que hace más de 6000 años, en Mesopotamia, había logrado un gran desarrollo con la acumulación, la concepción de la propiedad, la división del trabajo y los aspectos jurídicos; desarrollos que llevaron al hombre a dar orden a sus acciones y a lograr tener más y mejor información para el control; aspecto que logro con la contabilidad. En este orden de ideas en el artículo se determina que la contabilidad no surgió para suplir los fallos de la memoria, sino por la poca capacidad de la memoria para traer al presente todas las acciones humanas, especialmente las de carácter económico.

Rupture of Al matrix in U-Mo/Al dispersion fuel by fission induced creep

Energy Technology Data Exchange (ETDEWEB)

Jeong, Gwan Yoon; Sohn, Dong Seong [UNIST, Daejeon (Korea, Republic of); Kim, Yeon Soo [Argonne National Laboratory, Argonnge (United States); Lee, Kyu Hong [KAERI, Daejeon (Korea, Republic of)

2016-05-15

This phenomenon was found specifically in the dispersion fuel plate with Si addition in the Al matrix to suppress interaction layer (IL) formation between UMo and Al. It is known that the stresses induced by fission induced swelling in U-Mo fuel particles are relieved by creep deformation of the IL, surrounding the fuel particles, that has a much higher creep rate than the Al matrix. Thus, when IL growth is suppressed, the stress is instead exerted on the Al matrix. The observed rupture in the Al matrix is believed to be caused when the stress exceeded the rupture strength of the Al matrix. In this study, the possibility of creep rupture of the Al matrix between the neighboring U-Mo fuel particles was examined using the ABAQUS finite element analysis (FEA) tool. The predicted rupture time for a plate was much shorter than its irradiation life indicating a rupture during the irradiation. The higher stress leads Al matrix to early creep rupture in this plate for which the Al matrix with lower creep strain rate does not effectively relieve the stress caused by the swelling of the U-Mo fuel particles. For the other plate, no rupture was predicted for the given irradiation condition. The effect of creeping of the continuous phase on the state of stress is significant.

Effect of Al and AlP on the microstructure of Mn-30 wt.%Si alloy

Energy Technology Data Exchange (ETDEWEB)

Wu Yuying [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jing Shi Road 73, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jing Shi Road 73, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn

2008-04-15

Effect of Al and AlP particles on the microstructure of near eutectic Mn-Si alloy (Mn-30 wt.%Si) was studied by Electron Probe Micro-analyzer (EPMA) and Differential Scanning Calorimeter (DSC). Crystal lattice correspondence analyses show that both Al and AlP have good lattice matching coherence relationships with MnSi phase, and the addition of Al and AlP particles results in an abnormal eutectic structure, i.e. the eutectic constitution MnSi and Mn{sub 5}Si{sub 3} precipitate separately: MnSi precipitates firstly, and then the Mn{sub 5}Si{sub 3} phase.

Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression

OpenAIRE

Qian, Suxin; Geng, Yunlong; Wang, Yi; Pillsbury, Thomas E.; Hada, Yoshiharu; Yamaguchi, Yuki; Fujimoto, Kenjiro; Hwang, Yunho; Radermacher, Reinhard; Cui, Jun; Yuki, Yoji; Toyotake, Koutaro; Takeuchi, Ichiro

2016-01-01

This paper reports the elastocaloric effect of two Cu-based shape memory alloys: Cu68Al16Zn16 (CuAlZn) and Cu73Al15Mn12 (CuAlMn), under compression at ambient temperature. The compression tests were conducted at two different rates to approach isothermal and adiabatic conditions. Upon unloading at a strain rate of 0.1 s−1 (adiabatic condition) from 4% strain, the highest adiabatic temperature changes (ΔTad) of 4.0 K for CuAlZn and 3.9 K for CuAlMn were obtained. The maximum stress and hystere...

Formation of Al3Ti/Mg composite by powder metallurgy of Mg-Al-Ti system.

Science.gov (United States)

Yang, Zi R; Qi Wang, Shu; Cui, Xiang H; Zhao, Yu T; Gao, Ming J; Wei, Min X

2008-07-01

An in situ titanium trialuminide (Al 3 Ti)-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg-Al-Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC), x-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Al 3 Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg-Al-Ti system, Al 3 Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg-Al-Ti system is almost the same as that of the Al-Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

Al-‘Alāqah baina Ushūl al-Fiqh wa Maqāshidi al-Sharīah wa al-Da’wah ilā Ta’sīsi ‘Ilmi al-Maqāshid

Directory of Open Access Journals (Sweden)

Anggraini Binti Ramli

2016-12-01

Full Text Available The study of Maqāshid sharīa is an important point in the discussion of Islamic legal theory (ushūl al-fiqh. Serious debates began to emerge in the 19th century among Islamic jurists concerning the position of maqāshid sharīa. At least, there are three important debates in the history; first, whether maqāshid is part of the discussion ushūl al-fiqh; second, is maqāshid sharīa built upon a foundation of classical Islamic jurisprudence (fiqh; and third, whether the maqāshid sharīa study is able to become an independent science that is separated from the study of classical Islamic jurisprudence. This article tries to present a discussion of the three paradigms by employing a descriptive-analytic method. The results of this study uncover that the study of maqāshid sharīa is like two sides of one coin; theoretically it is a distinctive study from ushūl al-fiqh, but it cannot be separated from one another. Ushūl al-fiqh has become the foundation to find out more details about the study of maqashid sharia. The separation between classical Islamic jurisprudence (fiqh and maqāshid sharīa study conducted by Islamic jurists is a relative separation.

Solutional Landforms of Gabal Al-Qaraha, the Oasis of Al-Hasa, Saudi Arabia

OpenAIRE

Embabi, Nabil S.

1981-01-01

Jabal Al-Qarah is one of the small outlier hills at the Oasis of Al-Hasa, lying at about lOkm ENE of Al-Hafuf Town. The solutional forms of Al-Qarah hill discussed in this paper are as follows : 1. A calcareous duricrust which covers the top and some of the slopes of the hill. 2. Rock Pillars which are long columns of white lime-stone. 3. Huge crevasses which are wide erosional openings along vertical joints. 4. Narrow, sinuous caves inside the hill. 5. Pedestal rocks with mushroo...

Comparison on the interaction of Al3+/nano-Al13 with calf thymus DNA /salmon sperm DNA

Science.gov (United States)

Ma, Fei; Ma, Yue; Du, Changwen; Yang, Xiaodi; Shen, Renfang

2015-11-01

The conformation change, binding mode and binding site between Al3+/nano-Al13 and calf thymus DNA/salmon sperm DNA were investigated by UV-vis absorption, FTIR spectra, Raman spectroscopy and CD spectra, as well as melting curves measurement. The UV-vis spectra and circular dichroism spectra results suggested that the phosphate group structure was changed when Al3+ interacted with DNA, while the double-helix was distorted when nano-Al13 interacted with DNA. The FTIR and Raman spectroscopy revealed that the binding sites were Al3+ … PO2, Al3+ … N7/guanine PO2 … Al13 … N7-C8/guanine with calf thymus DNA, and Al3+ … N3-O2/cytosine, Al3+ … N7-C8/guanine, PO2 … Al13 … N7-C8/guanine, PO2 … Al13 … N1/adenine with salmon sperm DNA, respectively. The electrostatic binding was existed between Al3+ and DNA, and the electrostatic binding and complexing were found between nano-Al13 and DNA.

Bukti Kebenaran Al-quran

OpenAIRE

Aliyah, Sri

2015-01-01

Al Quran is the greatest miracles of Muhammad SAW as the direction of humankind in order to reach eternal happiness. Scientific evidences show that Al Quran has the truth massages, although it was released far before the finding of modern sciences. The researches continue to study the truth of Al Quran an it revealed the historical fact.

Sintering of (Ni,Mg)(Al,Fe)2O4 Materials and their Corrosion Process in Na3AlF6-AlF3-K3AlF6 Electrolyte

Science.gov (United States)

Xu, Yibiao; Li, Yawei; Yang, Jianhong; Sang, Shaobai; Wang, Qinghu

2017-06-01

The application of ledge-free sidewalls in the Hall-Héroult cells can potentially reduce the energy requirement of aluminum production by about 30 pct (Nightingale et al. in J Eur Ceram, 33:2761-2765, 2013). However, this approach poses great material challenges since such sidewalls are in direct contact with corrosive electrolyte. In the present paper, (Ni,Mg)(Al,Fe)2O4 materials were prepared using fused magnesia, reactive alumina, nickel oxide, and iron oxide powders as the starting materials. The sintering behaviors of specimens as well as their corrosion resistance to molten electrolyte have been investigated by means of X-ray diffraction and scanning electron microscope. The results show that after firing at temperature ranging from 1673 K (1400 °C) up to 1873 K (1600 °C), all the specimens prepared are composed of single-phase (Ni,Mg)(Al,Fe)2O4 composite spinel, the lattice parameter of which increases with increasing Fe3+ ion concentration. Increasing the iron oxide content enhances densification of the specimens, which is accompanied by the formation of homogeneously distributed smaller pores in the matrix. The corrosion tests show that corrosion layers consist of fluoride and Ni(Al,Fe)2O4 composite spinel grains are produced in specimens with Fe/Al mole ratio no more than 1, whereas dense Ni(Al,Fe)2O4 composite spinel layers are formed on the surface of the specimens with Fe/Al mole ratio more than 1. The dense Ni(Al,Fe)2O4 composite spinel layers formed improve the corrosion resistance of the specimens by inhibiting the infiltration of electrolyte and hindering the chemical reaction between the specimen and electrolyte.

Synthesis of Al(OH3 Nanostructures from Al(OH3 Microagglomerates via Dissolution-Precipitation Route

Directory of Open Access Journals (Sweden)

Bo Yu

2013-01-01

Full Text Available A facile method was developed to synthesize Al(OH3 nanostructures from Al(OH3 microagglomerates by dissolution in 9.0 mol·L−1 NaOH at 115°C followed by dilution and aging of the solution at room temperature. The influence of Al(OH3 nanoseed and surfactants as sodium dodecyl sulfate (SDS, polyethylene glycol 6000 (PEG6000, and cetyltrimethylammonium bromide (CTAB on the formation of the Al(OH3 nano-structures was investigated. The experimental results indicated that the Al(OH3 microspheres composed of nanoparticles were prepared in the blank experiment, while dispersive Al(OH3 nano-particles with a diameter of 80–100 nm were produced in the presence of Al(OH3 nano-seed and CTAB.

Effects of Al content on structure and mechanical properties of hot-rolled ZrTiAlV alloys

International Nuclear Information System (INIS)

Liang, S.X.; Yin, L.X.; Che, H.W.; Jing, R.; Zhou, Y.K.; Ma, M.Z.; Liu, R.P.

2013-01-01

Highlights: • Phase structure is greatly dependent on the Al content. • Intermetallic compound will precipitates while Al content is over 6.9 wt%. • Equiaxed α-phase grains present in the hot-rolled alloy with 6.9 wt% Al. • Alloys with Al content from 3.3 wt% to 5.6 wt% have good mechanical properties. - Abstract: Zirconium alloys show attractive properties for astronautic applications where the most important factors are anti-irradiation, corrosion resistance, anti-oxidant, very good strength-to-weight ratio. The effects of Al content (2.2–6.9 wt%) on structure and mechanical properties of the hot-rolled ZrTiAlV alloy samples were investigated in this study. Each sample of the hot-rolled ZrTiAlV alloys with Al contents from 2.2 wt% to 5.6 wt% is composed of the α phase and β phase, meanwhile, the relative content of the α phase increased with the Al content. However, the (ZrTi) 3 Al intermetallic compound was observed as the Al content increased to 6.9 wt%. Changes of phase compositions and structure with Al content distinctly affected mechanical properties of ZrTiAlV alloys. Yield strength of the alloy with 2.2 wt% Al is below 200 MPa. As Al content increased to 5.6 wt%, the yield strength, tensile strength and elongation of the examined alloy are 1088 MPa, 1256 MPa and 8%, respectively. As Al content further increased to 6.9 wt%, a rapid decrease in ductility was observed as soon as the (ZrTi) 3 Al intermetallic compound precipitated. Results show that the ZrTiAlV alloys with Al contents between 3.3 wt% and 5.6 wt% have excellent mechanical properties

Relationship between Al content and substitution mechanism of Al-bearing anhydrous bridgmanites

Science.gov (United States)

Noda, M.; Inoue, T.; Kakizawa, S.

2017-12-01

It is considered that two substitution mechanisms, Tschermak substitution and oxygen vacancy substitution, exist in MgSiO3 bridgmanite for the incorporation of Al in anhydrous condition. Kubo and Akaogi (2000) has conducted the phase equilibrium experiment in the system MgSiO3-Al2O3, and established the phase diagram up to 28 GPa. However the careful observation in the bridgmanite shows that the chemical compositions are slightly deviated from Tschermak substitution join. The same tendency can be also observed in the run products by Irifune et al. (1996). This result indicates that pure Tschermak substitution bridgmanite cannot be stable even in the MgSiO3-Al2O3 join experiment. However, the previous studies used powder samples as the starting materials, so the absorbed water may affect the results. Therefore, we tried to conduct the experiment in the join MgSiO3-Al2O3 in extremely anhydrous condition to clarify whether the pure Tschermak substitution bridgmanite can be stable or not. In addition, we also examined the stability of oxygen vacancy bridgmanite in the extremely anhydrous condition for the comparison. The high pressure synthesis experiments were conducted at 28 GPa and 1600-1700° for 1hour using a Kawai-type multi-anvil apparatus. Four different Al content samples were prepared as the starting materials along the ideal substitution line of Tschermak (Al=0.025, 0.05, 0.1, 0.15 mol) and oxygen-vacancy (Al=0.025, 0.05, 0.075, 0.1 mol) substitutions, respectively (when total cation of 2). The glass rods were used as the starting materials to eliminate the absorbed water on the sample surface. The chemical compositions of the synthesized bridgmanite could not be measured by EPMA because of small grain size less than submicron. Therefore the chemical compositions were estimated from the result of the XRD pattern by subtracting the amount of the other phases. The estimated chemical compositions of Tschermak substitution bridgmanites were consistent with the

Burden of rare variants in ALS genes influences survival in familial and sporadic ALS.

Science.gov (United States)

Pang, Shirley Yin-Yu; Hsu, Jacob Shujui; Teo, Kay-Cheong; Li, Yan; Kung, Michelle H W; Cheah, Kathryn S E; Chan, Danny; Cheung, Kenneth M C; Li, Miaoxin; Sham, Pak-Chung; Ho, Shu-Leong

2017-10-01

Genetic variants are implicated in the development of amyotrophic lateral sclerosis (ALS), but it is unclear whether the burden of rare variants in ALS genes has an effect on survival. We performed whole genome sequencing on 8 familial ALS (FALS) patients with superoxide dismutase 1 (SOD1) mutation and whole exome sequencing on 46 sporadic ALS (SALS) patients living in Hong Kong and found that 67% had at least 1 rare variant in the exons of 40 ALS genes; 22% had 2 or more. Patients with 2 or more rare variants had lower probability of survival than patients with 0 or 1 variant (p = 0.001). After adjusting for other factors, each additional rare variant increased the risk of respiratory failure or death by 60% (p = 0.0098). The presence of the rare variant was associated with the risk of ALS (Odds ratio 1.91, 95% confidence interval 1.03-3.61, p = 0.03), and ALS patients had higher rare variant burden than controls (MB, p = 0.004). Our findings support an oligogenic basis with the burden of rare variants affecting the development and survival of ALS. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

O turista, o morador e o uso do espaço urbano: interações espaciais em Gramado e Canela

Directory of Open Access Journals (Sweden)

Décio Rigatti

2002-12-01

Full Text Available O objetivo central deste trabalho é o de examinar as modalidades de estruturação espacial de cidades turísticas, verificando como o espaço se organiza de forma lógica para permitir o acesso e a movimentação dos turistas, ou os estranhos ao sistema espacial considerado, além de estruturar a vida cotidiana dos moradores. A partir do exame de duas cidades: Gramado e Canela, cidades gaúchas que possuem no turismo um forte componente de sua base econômica, pretende-se analisar em que medida o espaço atua como uma instância das relações entre estranhos e moradores.

Turpilóquio em português e italiano: reflexões sobre marcas de uso de itens tabus em dicionários

Directory of Open Access Journals (Sweden)

Vivian Orsi

2014-06-01

Full Text Available Neste artigo procuramos compreender o lugar das palavras tabuizadas e sua importância na língua. Focamos questões sobre o tabu e sobre como as palavras sofrem algum tipo de proibição. Elegemos como objeto de pesquisa os palavrões pois observamos que essas palavras possuem um importante espaço no léxico de muitos falantes, e estão presentes em livros e filmes, além da fala cotidiana. Assim tentamos mostrar que devem ser analisados com atenção e livres de preconceitos. Verificamos que os palavrões podem ser muito diferentes nas línguas selecionadas, refletindo, desse modo, a cultura dos idiomas envolvidos.

Aproximación a un estudio jurídico y ético de la medicina genética predictiva

Directory of Open Access Journals (Sweden)

Aitziber Emaldi Cirión

2017-01-01

Full Text Available Constantemente, los avances en el ámbito de la reproducción plantean cuestiones bioéticas y en ocasiones, también jurídicas de gran relevancia. Así es, los diagnósticos genéticos predictivos cada vez más preciosos nos obligan a tomar decisiones tales como: la de tener un hijo con una discapacidad o anomalía, proceder a un aborto, etc. En este trabajo de investigación, se analizarán los aspectos éticos en conflicto, teniendo presente la regulación jurídica que existe al respecto de estas prácticas cada vez más cotidianas.

La evaluación como manifestación ideológica

Directory of Open Access Journals (Sweden)

Moya Pardo Myriam Constanza

1996-06-01

Full Text Available

En este artículo se hace evidente una clase específica de conocimiento que capacita al hablante/oyente para interactuar lingüísticamente. Esto tiene que ver con lo que Hamon (1983 ha llamado evaluaciones, las cuales indican la concepción del mundo constituida por un conjunto de normas aprendidas acerca de la realidad natural, social y simbólica. Este trabajo pretende  entonces mostrar cómo a través de sus narraciones cotidianas los niños expresan creencias y opiniones en relación con el mundo narrado como reflejo de la ideología de la sociedad en la cual se encuentran inmersos.

Influence of Al grain boundaries segregations and La-doping on embrittlement of intermetallic NiAl

Energy Technology Data Exchange (ETDEWEB)

Kovalev, Anatoly I., E-mail: a_kovalev@sprg.ru; Wainstein, Dmitry L.; Rashkovskiy, Alexander Yu.

2015-11-01

Highlights: • We investigated Al grain boundaries segregations in ordered pure and La-doped NiAl. • Structural segregation of Al decreases critical strain for brittle cracks nucleation. • La alloying sharply improves plasticity of NiAl intermetallic. • Metallicity of interatomic bonds on grain boundaries increases at La alloying. • We have experimentally measured by EELFS that La atoms are located in Al sublattice. - Abstract: The microscopic nature of intergranular fracture of NiAl was experimentally investigated by the set of electron spectroscopy techniques. The paper demonstrates that embrittlement of NiAl intermetallic compound is caused by ordering of atomic structure that leads to formation of structural aluminum segregations at grain boundaries (GB). Such segregations contain high number of brittle covalent interatomic bonds. The alloying by La increases the ductility of material avoiding Al GB enrichment and disordering GB atomic structure. The influence of La alloying on NiAl mechanical properties was investigated. GB chemical composition, atomic and electronic structure transformations after La doping were investigated by AES, XPS and EELFS techniques. To qualify the interatomic bonds metallicity the Fermi level (E{sub F}) position and electrons density (n{sub eff}) in conduction band were determined in both undoped and doped NiAl. Basing on experimental results the physical model of GB brittleness formation was proposed.

Heterogeneous nucleation of solid Al from the melt by Al 3 Ti : Molecular dynamics simulations

KAUST Repository

Wang, Junsheng; Horsfield, Andrew; Lee, Peter D.; Brommer, Peter

2010-01-01

It has been known experimentally for some time that Al3 Ti is a powerful nucleant for the solidification of aluminum from the melt; however, a full microscopic understanding is still lacking. To develop this understanding, we have performed molecular dynamics simulations of the nucleation and early stages of growth using published embedded atom method potentials for Al-Ti, but modified by us to stabilize the D 022 structure. We discover that Al3 Ti can indeed be very effective in promoting the growth of solid Al but the manner in which growth takes place depends sensitively on the surface on which the Al nucleates. In particular, complete growth of solid Al from the liquid on the (001) and (110) surfaces of Al3 Ti occurs at a lower temperature than on the (112) surface. This anisotropy agrees with observations in previous experiments. We explain this observation in terms of interfacial energies. On the preferential (111) surface of Al the solid-liquid interfacial energy is highest while the solid-vacuum energy is lowest. Our simulations also show that the extent of ordering taking place in liquid Al close to the Al 3 Ti substrate above the melting point correlates well with the effectiveness of the substrate as a nucleant below the melting temperature: this could provide a computationally efficient scheme to identify good nucleants. © 2010 The American Physical Society.

Heterogeneous nucleation of solid Al from the melt by Al 3 Ti : Molecular dynamics simulations

KAUST Repository

Wang, Junsheng

2010-10-27

It has been known experimentally for some time that Al3 Ti is a powerful nucleant for the solidification of aluminum from the melt; however, a full microscopic understanding is still lacking. To develop this understanding, we have performed molecular dynamics simulations of the nucleation and early stages of growth using published embedded atom method potentials for Al-Ti, but modified by us to stabilize the D 022 structure. We discover that Al3 Ti can indeed be very effective in promoting the growth of solid Al but the manner in which growth takes place depends sensitively on the surface on which the Al nucleates. In particular, complete growth of solid Al from the liquid on the (001) and (110) surfaces of Al3 Ti occurs at a lower temperature than on the (112) surface. This anisotropy agrees with observations in previous experiments. We explain this observation in terms of interfacial energies. On the preferential (111) surface of Al the solid-liquid interfacial energy is highest while the solid-vacuum energy is lowest. Our simulations also show that the extent of ordering taking place in liquid Al close to the Al 3 Ti substrate above the melting point correlates well with the effectiveness of the substrate as a nucleant below the melting temperature: this could provide a computationally efficient scheme to identify good nucleants. © 2010 The American Physical Society.

Strength of Al and Al-Mg/alumina bonds prepared using ultrahigh vacuum diffusion bonding

International Nuclear Information System (INIS)

King, W.E.; Campbell, G.H.; Wien, W.L.; Stoner, S.L.

1994-01-01

The authors have measured the cross-breaking strength of Al and Al-Mg alloys bonded with alumina. Diffusion bonding of Al and Al-Mg alloys requires significantly more bonding time than previously thought to obtain complete bonding. In contrast to previous diffusion bonding studies, fracture morphologies are similar to those obtained in bonds formed by liquid phase reaction; i.e., bonds are as strong or stronger than the ceramic; and fracture tends to propagate in the metal for pure Al and near the interface in the ceramic for the alloys. There are indications that the fracture morphology depends on Mg content and therefore on plasticity in the metal

Wear protection in cutting tool applications by PACVD (Ti,Al)N and Al2O3 coatings

International Nuclear Information System (INIS)

Kathrein, M.; Heiss, M.; Rofner, R.; Schleinkofer, U.; Schintlmeister, W.; Schatte, J.; Mitterer, C.

2001-01-01

Various (Ti,Al)N-, Al 2 O 3 -, and (Ti,Al)N/Al 2 O 3 multilayer coatings were deposited onto cemented carbide cutting tool inserts by a plasma assisted chemical vapor deposition (PACVD) technique. Al 2 O 3 coatings were deposited using the gaseous mixture AlCl 3 , Ar, H 2 , and O 2 . (Ti,Al)N intermediate layers were deposited in the same device using the process mentioned and the gases AICl 3 , Ar, H 2 , TiCl 4 and N 2 . The unique properties of (Ti,Al)N/Al 2 O 3 multilayer coatings result in superior wear protection for cutting inserts applied in severe multifunction cutting processes. The influence of different deposition temperatures an structure and properties of the coatings like crystallographic phases, chemical composition, mechanical and technological properties is shown. PACVD (Ti,Al)N/Al 2 O 3 coated cutting inserts with fine grained crystalline α/κ-Al 2 O 3 offer performance advantages which are superior with respect to coatings deposited by chemical vapor deposition (CVD) due to the low deposition temperature applied. (author)

Modelo analítico rizomático para el estudio de los efectos de las políticas educativas regionales en la experiencia escolar cotidiana: las perspectivas de Rockwell, Bourdieu y Ball

Directory of Open Access Journals (Sweden)

Silvana Lorena Lagoria

Full Text Available Resumen: La escuela cotidiana se comprende en parte por un particular trasfondo que tiñe toda la experiencia que allí se desarrolla. Ese trasfondo lo constituye la cultura escolar. En su construcción intervienen tanto prácticas internas como externas a la escuela, entre ellas, las políticas educativas. La influencia de las políticas educativas regionales sobre la conformación de la cultura institucional en el devenir del cotidiano escolar se plantea como un interesante y complejo objeto a desentrañar. Para emprender ese camino es importante construir una base teórica consistente a partir de la conjunción de diferentes fuentes. En términos de Tello (2015, esto implica concebir un sustento teórico rizomático como base para analizar la cultura escolar en el marco de la “escuela cotidiana” (Rockwell, 2000. En definitiva, lo que planteamos aquí es la necesidad de construir un eje epistemológico potente para hacer inteligibles los efectos de las políticas educativas en el cotidiano escolar. En ese sentido, el presente trabajo se propone interrelacionar un conjunto de perspectivas teóricas a modo de red, para comprender un aspecto intrínseco de la escuela: los efectos de las políticas educativas en la cultura institucional. En primer lugar, definimos qué entendemos por cultura y cultura institucional. A continuación proponemos nuestro modelo analítico rizomático, integrando los aportes teóricos de Rockwell, Bourdieu y Ball. Finalmente, en las conclusiones, realizamos una breve integración de las ideas expuestas en el cuerpo de este trabajo.

Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

Science.gov (United States)

Pandit, Bhishma; Seo, Tae Hoon; Ryu, Beo Deul; Cho, Jaehee

2016-06-01

The current transport mechanism of graphene formed on AlxGa1-xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40) is investigated. The current-voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

Directory of Open Access Journals (Sweden)

Bhishma Pandit

2016-06-01

Full Text Available The current transport mechanism of graphene formed on AlxGa1−xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40 is investigated. The current–voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

Assessment of phase constitution on the Al-rich region of rapidly solidified Al-Co-Fe-Cr alloys

International Nuclear Information System (INIS)

Wolf, W.; Bolfarini, C.; Kiminami, C.S.; Botta, W.J.

2016-01-01

The formation of quasicrystalline approximants in rapidly solidified Al-Co-Fe-Cr alloys was investigated. Alloys of atomic composition Al 71 Co 13 Fe 8 Cr 8 , Al 77 Co 11 Fe 6 Cr 6 and Al 76 Co 19 Fe 4 Cr 1 were produced using melt spinning and arc melting methods and their microstructural characterization was carried out by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Up to the present there is no consensus in the literature regarding the formation of quasicrystalline phase or quasicrystalline approximants in the Al 71 Co 13 Fe 8 Cr 8 alloy. This work presents, for the first time, a detailed structural characterization of selected alloys in the Al-Co-Fe-Cr system close to the atomic composition Al 71 Co 13 Fe 8 Cr 8 . The results indicated the samples to be composed, mostly, by two intermetallic phases, which are quaternary extensions of Al 5 Co 2 and Al 13 Co 4 and are quasicrystalline approximants. Although the Al 5 Co 2 phase has already been reported in the Al 71 Co 13 Fe 8 Cr 8 alloy, the presence of the monoclinic Al 13 Co 4 is now identified for the first time in the as cast state. In the binary Al-Co system a quasicrystalline phase is known to form in a rapidly solidified alloy with composition close to the monoclinic and orthorhombic Al 13 Co 4 phases. This binary quasicrystalline phase presents an average valence electron per atom (e/a) between 1.7 and 1.9; thus, in addition to the Al 71 Co 13 Fe 8 Cr 8 alloy, the compositions Al 77 Co 11 Fe 6 Cr 6 and Al 76 Co 19 Fe 4 Cr 1 were chosen to be within the region of formation of the quaternary extension of the Al 13 Co 4 phase and also within the (e/a) of 1.7 to 1.9. However, no quasicrystalline phase is present in any of the studied alloys. The Al-Co-Fe-Cr system, around the compositions studied, is composed of quaternary extensions of Al-Co intermetallic phases, which present solubility of Fe and Cr at Co atomic sites. - Highlights: •The Al rich region of the Al

Comparison of ALS functionality and plant growth in ALS-inhibitor susceptible and resistant Myosoton aquaticum L.

Science.gov (United States)

Liu, Weitang; Bai, Shuang; Jia, Sisi; Guo, Wenlei; Zhang, Lele; Li, Wei; Wang, Jinxin

2017-10-01

Herbicide target-site resistance mutations may cause pleiotropic effects on plant ecology and physiology. The effect of several known (Pro197Ser, Pro197Leu Pro197Ala, and Pro197Glu) target-site resistance mutations of the ALS gene on both ALS functionality and plant vegetative growth of weed Myosoton aquaticum L. (water chickweed) have been investigated here. The enzyme kinetics of ALS from four purified water chickweed populations that each homozygous for the specific target-site resistance-endowing mutations were characterized and the effect of these mutations on plant growth was assessed via relative growth rate (RGR) analysis. Plants homozygous for Pro197Ser and Pro197Leu exhibited higher extractable ALS activity than susceptible (S) plants, while all ALS mutations with no negative change in ALS kinetics. The Pro197Leu mutation increased ALS sensitivity to isoleucine and valine, and Pro197Glu mutation slightly increased ALS sensitivity to isoleucine. RGR results indicated that none of these ALS resistance mutations impose negative pleiotropic effects on relative growth rate. However, resistant (R) seeds had a lowed germination rate than S seeds. This study provides baseline information on ALS functionality and plant growth characteristics associated with ALS inhibitor resistance-endowing mutations in water chickweed. Copyright © 2017. Published by Elsevier Inc.

AL FIKR AL BALAGHI FI AL MA’ĂNI ‘INDA AS SAKĂKI FI KITABIHI MIFTAHUL ULUM DIRĂSAH BALAGHIYYAH

Directory of Open Access Journals (Sweden)

Talqis Nurdianto

2018-02-01

Full Text Available Miftāhul ‘Ulūm, written by al-Sakākī, especially the third part, was the beginning of a new phase in the development of Arabic rhetoric. Al-Sakākī divided the rhetoric into three fields of study, which are  (1 Ma’ānī, (2 Bayān, (3 Badī’. However, his style is influenced by philosophers, theologians and their verbal lexicon, which are difficult to take, especially for the ordinary recipient. Al-Sakākī described that his book containing several types of literature, namely, ‘ilm ṣarf in complete version and its conclusion, derivation science, and the grammatical study in the completeness of Ma’ānī and Bayān. The meaning of Makna is the study of completeness and conclusion. Therefore, books and prose, and poem require al-‘Arūḍ and al-Qawāfī include Ṣarf, Grammar, Ma’ānī, Bayān, limitation, reasoning, al’Arūḍ, and al-Qawāfī. He argued that the fields of study were influential in delivering knowledge to the student in order to reach the goal of the author towards his book.This research was an analytical descriptive study of al-Sakākī rhetoric that focused on the normative aspect represented by rhetorical rule and aesthetic aspects. Those aspects were shown by the feeling. Al-Sakākī rhetoric thought is a method based on mental division and has conducted in the construction of many factors, which the most important of them are philosophy and logic. Keywords: thought, rhetoric, meanings, sakkaki, study

A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

International Nuclear Information System (INIS)

Li Jianing; Chen Chuanzhong; Squartini, Tiziano; He Qingshan

2010-01-01

Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti 3 Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti 3 Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti 3 Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti 3 Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

Study of the 27Al(n,2,)26Al reaction via accelerator mass spectrometry

International Nuclear Information System (INIS)

Wallner, A.

2000-06-01

The excitation function for the 27 Al(n,2n) 26 Al reaction is expected to show a strongly non-linear behavior in the neutron-energy region around 14 MeV, the neutron energy in D-T plasmas; thus the production rate of 26 Al (t 1/2 =7.2*10 5 a) in D-T fusion environments can in principle be used to measure the temperature of such plasmas. Existing measurements, however, are strongly discordant. Therefore, a new accurate measurement of the 27 Al(n,2n) 26 Al cross sections in the near threshold region (E n =13.5-14.8 MeV) was performed with the goal to achieve relative cross sections with the highest accuracy possible. In addition, the measurements were also designed to provide good absolute cross-section values, as absolute cross sections are important for radioactive waste predictions. Samples of Al metal were irradiated with neutrons in the energy range near threshold (E th =13.55 MeV) at the Radiuminstitutes of both Vienna and St. Petersburg, and in Tokai-mura, Japan. In Tuebingen irradiations with neutrons of higher energies (17 and 19 MeV) were performed. The amount of 26 Al produced during the irradiations was measured via accelerator mass spectrometry (AMS) at the Vienna Environmental Research Accelerator (VERA). This work represents the first 26 Al measurements for this new facility. With this system, a background as low as 3*10 -15 for 26 Al/ 27 Al isotope ratios was obtained, corresponding to a (n,2n) cross section of 0.04 mb. Utilizing AMS, cross sections with much higher precision and considerably closer to the threshold than in previous investigations could be measured. The prerequisite for its application as a temperature monitor, namely a very well known shape of the excitation function was met. A quantitative prediction of the sensitivity of this method for monitoring the temperature in a D-T fusion plasma was therefore possible. For thermal plasmas temperature changes in the order of 5 to 15 % should be detectable. An even higher sensitivity was found

Magnetostrictive properties of FeAl/polyester and FeAl/silicone composites

Energy Technology Data Exchange (ETDEWEB)

Riesgo, G. [Dpto. de Ciencias y Técnicas de la Navegación, Universidad de Oviedo, Campus universitario de Gijón, 33203 Gijón (Spain); Carrizo, J. [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Elbaile, L., E-mail: elbaile@uniovi.es [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Crespo, R.D. [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Sepúlveda, R. [Dpto. de Ingeniería Mecánica y de los Materiales, Universidad de Sevilla, Isla Cartuja, 41092 Sevilla (Spain); García, J.A. [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain)

2017-01-15

Highlights: • Nanocrystalline powders of FeAl have been obtained from the Fe{sub 81}Al{sub 19} ribbon produced by melt spinning. • The method allows the obtainment of a FeAl solid solution from the starting process. • The microstructure and magnetic properties of the powders were investigated. • Composites with a magnetostriction of 45 ppm have been obtained. - Abstract: Ribbons of composition Fe{sub 81}Al{sub 19} obtained by the melt spinning method have been used to yield powder by mechanical milling. Using this method, a rapid nanocrystallization and a FeAl solid solution phase was obtained from the start of the process. The microstructural and magnetic properties as well as the XRD patterns of the powders were studied in function of the milling time. Grain refinement and an increase of the coercive field were the main transformations resulting from increasing the milling time. Two sets of magnetostrictive composites were produced from the 100 h-milled powder. In one of them polyester was used as matrix and in the other one silicone. In the case of the silicone composites cured in a magnetic field of 140 mT in the longitudinal direction a saturation magnetostriction as high as 45 ppm was obtained.

Thermodynamic calculation of Al-Gd and Al-Gd-Mg phase equilibria checked by key experiments

International Nuclear Information System (INIS)

Groebner, J.; Kevorkov, D.; Schmid-Fetzer, R.

2001-01-01

The binary Al-Gd and the ternary Al-Gd-Mg systems were calculated using the Calphad method. It is demonstrated that previous interpretation of ternary liquidus temperatures below 700 C must be related to other phase equilibria. The actual ternary liquidus temperatures are much higher, up to some 600 C above the previous interpretation in literature. They are widely governed by the high-melting compounds Al 2 Gd and Al 3 Gd with liquidus surfaces stretching far into the ternary system. A small number of key experiments in this work confirmed the calculated liquidus temperature and the phase relations. The available experimental data in literature fit excellently with the calculation in the binary Al-Gd system. In the ternary Al-Gd-Mg system, which is shown in several sections of the phase diagram, a good agreement can be observed too, considering the necessary reinterpretation of the liquidus temperatures suggested by Rokhlin et al. Ternary solubilities were not found experimentally. The ternary compound Al 4 GdMg (τ) forms in a ternary peritectic reaction at 761 C. (orig.)

Forged HITEMAL: Al-based MMCs strengthened with nanometric thick Al{sub 2}O{sub 3} skeleton

Energy Technology Data Exchange (ETDEWEB)

Balog, Martin, E-mail: ummsbama@savba.sk [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 83102 Bratislava (Slovakia); Krizik, Peter; Nosko, Martin; Hajovska, Zuzana [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 83102 Bratislava (Slovakia); Victoria Castro Riglos, Maria [Centro Atómico Bariloche, Av. Bustillo 9.500, 8400 Bariloche, Río Negro (Argentina); Rajner, Walter [New Materials Development GmbH, Römerstrasse 28, 83410 Laufen, Leobendorf (Germany); Liu, De-Shin [National Chung Cheng University, 168 University Rd., Min-Hsiung, 62102 Chia-Yi, Taiwan (China); Simancik, Frantisek [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 83102 Bratislava (Slovakia)

2014-09-08

Bulk Al–Al{sub 2}O{sub 3} metal matrix composites (MMCs) named HITEMAL (high temperature aluminum) were fabricated in situ by forging compaction of five different types of gas-atomized commercial purity Al powders with a mean particle size in the range of 1–9 µm. As-forged HITEMAL consisted of (sub)micrometric Al grains (matrix) decorated with nanometric thick amorphous Al{sub 2}O{sub 3} (a-Al{sub 2}O{sub 3}) skeleton. Low-angle grain boundaries (LAGBs) free of Al{sub 2}O{sub 3} were located in the Al grain interior. The Al grain size and the portion of LAGBs increased with the increase in the relative powder surface area. As-forged HITEMAL shows excellent thermal stability up to 400 °C for 24 h. Annealing at temperatures ≥450 °C led to crystallization and morphological transformation from a-Al{sub 2}O{sub 3} skeleton to nanometric γ-Al{sub 2}O{sub 3} particles. Owing to the pinning effect of Al{sub 2}O{sub 3} phase, no Al grain growth took place during annealing up to 500 °C. HITEMAL showed attractive mechanical properties especially when tested at 300 °C (yield strength up to 220 MPa, Young's modulus up to 58 GPa). Despite the presence of a nearly continuous a-Al{sub 2}O{sub 3} skeleton along adjacent Al grains, forged HITEMAL materials had reasonable room temperature elongation of 7–26%. HITEMAL's elongation decreased as the Al grain size decreased and with increased testing temperature. The loss in elongation (uniform and total) was attributed to the inhomogeneous flow, which occurred due to high densities of high angle grain boundaries (dislocation sinks) and small content of LAGBs. The strength of HITEMAL stemmed from grain boundary mediated strengthening mechanisms. The results showed a positive deviation from the Hall–Petch plot, which is typical behavior of ultrafine-grained metals. Transformation of a-Al{sub 2}O{sub 3} skeleton to γ-Al{sub 2}O{sub 3} particles led to deterioration of the HITEMAL strength and Young's modulus.

Determination of Al concentration in Al doped ZnO using Auger spectra excited by Mo X-rays

International Nuclear Information System (INIS)

Toth, J.; Koever, L.; Cserny, I.; Varga, D.

2006-01-01

Complete text of publication follows. A good conductor with excellent transparency is of crucial importance for the window layer of CIGS solar cells. Al doped ZnO is a good candidate for this purpose, its conductivity depends on the concentration and chemical state of the Al dopant atoms. It was demonstrated that the non-conventional XPS using Mo X-rays for excitation is a very sensitive tool for the detection of Al, P, Si [1, 2, 3]. The present paper compares the experimental ratios for Zn/Al photoinduced peak intensity ratios obtained using both Al and Mo X-ray excitations. The Mo excited Zn/Al intensity ratios can be determined with higher selectivity and sensitivity than the Zn/Al intensity ratios excited by Al X-rays. The experiments were performed with a hemispherical deflector electron spectrometer [4]. The chemical state of the Al was identified to be close to that in Al 2 O 3 . The atomic concentrations were determined using a calibration curve based on ZnO/Al samples with known composition of Al. The energy dependent efficiency of the electron spectrometer was determined comparing REELS spectra of Cu specimen to standard spectra measured by K. Goto (Nagoya Institute of Technology, Japan). For evaluation of the Al atomic concentrations from the measured photoelectron intensities the photoionisation cross-sections of Band et al [5] and the IMFP data of S. Tanuma et al [6] and C.J. Powell and A. Jablonski [7] were used. (author)

Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

Science.gov (United States)

Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

2017-03-01

P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

Al-Shebab: An Al-Qaeda Affiliate Case Study (2Rev)

Science.gov (United States)

2017-10-01

deputies responsible for finance , administration, and security. Coordination among regional groups is common.10 The deputy leader of al-Shebab, Mukhtar...Maaliya (Ministry of Finance ) controlled taxation. A complex court system also emerged. Multiple training camps were built that focused on hand-to-hand...Nathan Chandler, Counterterrorism and Counterinsurgency in Somalia: Assessing the Campaign Against Al Shabaab, Rand Corporation , 2016, accessed 6/5

Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

OpenAIRE

Xiao Wang; Wei Wang; Jingli Wang; Hao Wu; Chang Liu

2017-01-01

P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgG...

LA MÚSICA HARDCORE EN BOGOTÁ: CONVICCIÓN-PERSEVERANCIA Y VALOR ACERCAMIENTO AL QUEHACER HUMANO-ARTÍSTICO Y PRODUCTIVO DE BANDAS Y GESTORES

Directory of Open Access Journals (Sweden)

Martha Vidal Arizabaleta

2013-07-01

Full Text Available El presente artículo corresponde al estudio social realizado a los jóvenes de Bogotá que participan, viven y desarrollan actividades musicales relacionadas con el género musical de música alternativa, denominado "hardcore"3 , término que en inglés se utiliza con frecuencia para identificar un amplio espectro de experiencias musicales que describen lo extremo o aquello que roza los límites de lo habitual. El universo de la música es una de las experiencias de negocios de mayor impacto y realización en el mundo actual. Su multiplicidad, evolución y apertura en estilos y géneros de expresión e interpretación conjuga, de un lado, el sentimiento humano en la forma de vivencias, denuncias, inconformismos, emociones, pasiones, deseos y sueños presentes en las líricas y sonidos entrecruzados y, de otro lado, capital simbólico -en el sentido de Pierre Bourdieu-, capacidad de interrogar lo social, de denunciar, examinar críticamente y de orientar acciones sociales efectivas, visibles como proyectos de vida en general. Bogotá, por ser la ciudad capital, es un lugar privilegiado en donde confluyen diversas culturas y subculturas, imaginarios y estilos que conforman la vida orgánica de los jóvenes expresada a través de las propuestas musicales de los diferentes grupos. En la esfera comercial se presentan antagonismos, realizaciones, emprendimientos, propuestas innovadoras: fusiones, en fin, un sinnúmero de prácticas que nutren la experiencia cotidiana. En este contexto, el proyecto se orientó a la identificación y caracterización de los grupos que tienen una unidad de negocio alrededor de una propuesta musical de tipo alternativo: Hardcore o sus derivados.

Tadris Al Mufradat Li Tathbiq Maharah Al Kalam Fi Madrasah Al Muallimin Al Islamiyyah Li Mahad Bait Al Arqam Balong Jember

Directory of Open Access Journals (Sweden)

Muhammad Ardy Zaini

2017-06-01

Full Text Available There are four  skills in teaching Arabic. Ie listening, speaking, reading, and writing. Among these four, speaking considered one of the most important objectives of learning foreign language. In order to speak properly, one must know the vocabulary and apply it in a sentence. The aims of this research is to describe the teaching of vocabulary to apply the speaking skill in the school of Islamic teachers in the Institute of Bait al Arqom Balong Jember. This study used qualitative approach. The data collection was taken trough observation, personal interview, history and documentation. The teaching of vocabulary to apply the speaking skill at the Islamic Teachers' School at the Institute of Bait Al Arqam Balong Jember has gone well in terms of planning (general objectives and specific objectives, implementation (materials, use of the teaching method and teaching aids, and evaluation (assessment and evaluation. This teaching is to apply the speaking skill in terms of conversation or dialogue and lecture.

NEK1 genetic variability in a Belgian cohort of ALS and ALS-FTD patients.

Science.gov (United States)

Nguyen, Hung Phuoc; Van Mossevelde, Sara; Dillen, Lubina; De Bleecker, Jan L; Moisse, Matthieu; Van Damme, Philip; Van Broeckhoven, Christine; van der Zee, Julie

2018-01-01

We evaluated the genetic impact of the amyotrophic lateral sclerosis (ALS) risk gene never in mitosis gene a-related kinase 1 (NEK1) in a Belgian cohort of 278 patients with ALS (n = 245) or ALS with frontotemporal dementia (ALS-FTD, n = 33) and 609 control individuals. We identified 2 ALS patients carrying a loss-of-function (LOF) mutation, p.Leu854Tyrfs*2 and p.Tyr871Valfs*17, that was absent in the control group. A third LOF variant p.Ser1036* was present in 2 sibs with familial ALS but also in an unrelated control person. Missense variants were common in both patients (3.6%) and controls (3.0%). The missense variant, p.Arg261His, which was previously associated with ALS risk, was detected with a minor allele frequency of 0.90% in patients compared to 0.33% in controls. Taken together, NEK1 LOF variants accounted for 1.1% of patients, although interpretation of pathogenicity and penetrance is complicated by the observation of occasional LOF variants in unaffected individuals (0.16%). Furthermore, enrichment of additional ALS gene mutations was observed in NEK1 carriers, suggestive of a "second hit" model were NEK1 variants may modify disease presentation of driving mutations. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

The effect of ammonia flow in the AlN spacer on the electrical properties of InAlN/AlN/GaN HEMT structures

International Nuclear Information System (INIS)

Gamarra, Piero; Lacam, Cedric; Magis, Michelle; Tordjman, Maurice; Di Forte Poisson, Marie-Antoinette

2012-01-01

During the past few years it has been reported that a thin AlN spacer of few nanometers needs to be inserted in InAlN/GaN high electron mobility transistors (HEMTs) to obtain high 2DEG carrier mobility. This work presents a systematic study of the effects of varying the ammonia flow in the AlN spacer of InAlN/AlN/GaN HEMTs grown by low pressure metalorganic vapour phase epitaxy (LP-MOVPE). The strain state, the surface roughness and the growth rate of AlN were found to be dependent on the V/III ratio. In addition the ammonia flow in the interlayer has a strong impact on the structural properties of the subsequent InAlN barrier layer and on the electrical properties of the structure. A sheet resistance as low as 327 Ω/□ with a sheet carrier density of 1.5 x 10 13 cm -2 has been obtained at room temperature. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

The effect of ammonia flow in the AlN spacer on the electrical properties of InAlN/AlN/GaN HEMT structures

Energy Technology Data Exchange (ETDEWEB)

Gamarra, Piero; Lacam, Cedric; Magis, Michelle; Tordjman, Maurice; Di Forte Poisson, Marie-Antoinette [III-V Lab., Marcussis (France)

2012-01-15

During the past few years it has been reported that a thin AlN spacer of few nanometers needs to be inserted in InAlN/GaN high electron mobility transistors (HEMTs) to obtain high 2DEG carrier mobility. This work presents a systematic study of the effects of varying the ammonia flow in the AlN spacer of InAlN/AlN/GaN HEMTs grown by low pressure metalorganic vapour phase epitaxy (LP-MOVPE). The strain state, the surface roughness and the growth rate of AlN were found to be dependent on the V/III ratio. In addition the ammonia flow in the interlayer has a strong impact on the structural properties of the subsequent InAlN barrier layer and on the electrical properties of the structure.istance as low as 327 {omega}/{open_square} with a sheet carrier density of 1.5 x 10{sup 13} cm{sup -2} has been obtained at room temperature. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Assessment of phase constitution on the Al-rich region of rapidly solidified Al-Co-Fe-Cr alloys

Energy Technology Data Exchange (ETDEWEB)

Wolf, W., E-mail: witorw@gmail.com [Programa de Pós-Graduação em Ciência e Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil); Bolfarini, C., E-mail: cbolfa@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil); Kiminami, C.S., E-mail: kiminami@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil); Botta, W.J., E-mail: wjbotta@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil)

2016-12-15

The formation of quasicrystalline approximants in rapidly solidified Al-Co-Fe-Cr alloys was investigated. Alloys of atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}, Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were produced using melt spinning and arc melting methods and their microstructural characterization was carried out by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Up to the present there is no consensus in the literature regarding the formation of quasicrystalline phase or quasicrystalline approximants in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy. This work presents, for the first time, a detailed structural characterization of selected alloys in the Al-Co-Fe-Cr system close to the atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}. The results indicated the samples to be composed, mostly, by two intermetallic phases, which are quaternary extensions of Al{sub 5}Co{sub 2} and Al{sub 13}Co{sub 4} and are quasicrystalline approximants. Although the Al{sub 5}Co{sub 2} phase has already been reported in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the presence of the monoclinic Al{sub 13}Co{sub 4} is now identified for the first time in the as cast state. In the binary Al-Co system a quasicrystalline phase is known to form in a rapidly solidified alloy with composition close to the monoclinic and orthorhombic Al{sub 13}Co{sub 4} phases. This binary quasicrystalline phase presents an average valence electron per atom (e/a) between 1.7 and 1.9; thus, in addition to the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the compositions Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were chosen to be within the region of formation of the quaternary extension of the Al{sub 13}Co{sub 4} phase and also within the (e/a) of 1.7 to 1.9. However, no quasicrystalline phase is present in any of the studied alloys. The Al-Co-Fe-Cr system

Corrosion analysis of AlMg2 and AlMgSi using electrochemical method

International Nuclear Information System (INIS)

Dian A; Maman Kartaman; Rosika K; Yanlinastuti

2014-01-01

Corrosion test of cladding materials and structures of research reactor fuel, AlMgSi and AlMg2 have been performed in demineralized water of pH 2 and 6.7 using an electrochemical method. Corrosion phenomenon is affected by several factor such as composition and condition of solution. The purpose of this activity is to investigate the corrosion phenomena through the determination of the parameters of corrosion and polarization curve. The materials used are AlMg2 and AlMgSi alloy in circular dish shape with an area of 1 Cm"2. Preparation of the test sample is performed through several stages polishing, cleaning and drying procedures followed ASTM G3. The electrochemical method is done by measuring the open circuit potential (OCP), polarization resistance and potentiodynamic in demineralized water of pH 2 and pH 6.7 at temperature of 25°C. The results of the OCP is the corrosion potential (Ecorr) of AlMg2 and AlMgSi each of -906.1 mV and -619.8 mV at pH 2 and -868.6 and -756.7 mV at pH 6.7 mV. The results of measurements by polarization resistance technique showed that the corrosion rate of AlMg2 and AlMgSi in safe category (<2 mpy) at pH 6.7 and at pH 2 corrosion rate increased significantly, but still in the lightweight category (<20 mpy). Potentiodynamic curves showed that the passivation at pH 6.7 is very low while the passivation at pH 2 occurs within a relatively short range potential and followed events corroded. (author)

Catalytic effect of Al and AlN interlayer on the growth and properties of containing carbon films

International Nuclear Information System (INIS)

Zhou, Bing; Liu, Zhubo; Tang, Bin; Rogachev, A.V.

2015-01-01

Highlights: • DLC and CN x bilayers with Al (AlN) interlayer were fabricated by cathode arc technique. • Complete diffusion of Al and C atoms occurs at the interface of Al/DLC (CN x ) bilayer. • Al/CN x bilayer presents a higher content of Csp 3 /Csp 2 bonds. • The hardness of Al/DLC bilayer decreases but increases for the other bilayers. • Morphology of the bilayers was explained by growth mechanism of DLC and surface state of substrate. - Abstract: Diamond-like carbon (DLC) and carbon nitride (CN x ) bilayer films with Al and AlN interlayer were fabricated by pulse cathode arc technique. The structure, composition, morphology and mechanical properties of the films were investigated by Raman, Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Knoop sclerometer and surface profilometer. The results indicated that the complete diffusion between C and Al atoms occurs in the Al/DLC and Al/CN x bilayer. Al interlayer induces the increase of the size and ordering of Csp 2 clusters in the films but AlN interlayer increases the disordering degree of Csp 2 clusters. XPS results showed that a higher content of Csp 3 /Csp 2 bonds presents in the Al/CN x bilayer, and Al and AlN interlayer decreases the atomic ratio of N/C. AFM with phase contrast mode illustrated the morphologic characteristics of the bilayer films. All the bilayers show a nano-structural surface. The morphology changes of the bilayer were well explained by the surface state of the substrate and the growth mechanism of DLC films. The hardness of Al/DLC bilayer decreases but it increases for the other bilayers compared to the corresponding DLC (CN x ) monolayer. The internal stress of the bilayer is significantly lower than that of the monolayer except for the AlN/CN x bilayer. These studies could make the difference at the time of choosing a suitable functional film for certain application

Characteristics in AlN/AlGaN/GaN Multilayer-Structured High-Electron-Mobility Transistors

International Nuclear Information System (INIS)

Gui-Zhou, Hu; Ling, Yang; Li-Yuan, Yang; Si, Quan; Shou-Gao, Jiang; Ji-Gang, Ma; Xiao-Hua, Ma; Yue, Hao

2010-01-01

A new multilayer-structured AlN/AlGaN/GaN heterostructure high-electron-mobility transistor (HEMT) is demonstrated. The AlN/AlGaN/GaN HEMT exhibits the maximum drain current density of 800 mA/mm and the maximum extrinsic transconductance of 170 mS/mm. Due to the increase of the distance between the gate and the two-dimensional electron-gas channel, the threshold voltage shifts slightly to the negative. The reduced drain current collapse and higher breakdown voltage are observed on this AlN/AlGaN/GaN HEMT. The current gain cut-off frequency and the maximum frequency of oscillation are 18.5 GHz and 29.0 GHz, respectively. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

60Co gamma radiation effect on AlGaN//AlN/GaN HEMT devices

International Nuclear Information System (INIS)

Wang Yanping; Luo Yinhong; Wang Wei; Zhang Keying; Guo Hongxia; Guo Xiaoqiang; Wang Yuanming

2013-01-01

The testing techniques and experimental methods of the 60 Co gamma irradiation effect on AlGaN/AlN/GaN high electron mobility transistors (HEMTs) are established. The degradation of the electrical properties of the device under the actual radiation environment are analyzed theoretically, and studies of the total dose effects of gamma radiation on AlGaN/AlN/GaN HEMTs at three different radiation bias conditions are carried out. The degradation patterns of the main parameters of the AlGaN/AlN/GaN HEMTs at different doses are then investigated, and the device parameters that were sensitive to the gamma radiation induced damage and the total dose level induced device damage are obtained. (authors)

Cu-segregation at the Q'/α-Al interface in Al-Mg-Si-Cu alloy

International Nuclear Information System (INIS)

Matsuda, Kenji; Teguri, Daisuke; Uetani, Yasuhiro; Sato, Tatsuo; Ikeno, Susumu

2002-01-01

Cu segregation was detected at the Q ' /α-Al interface in an Al-Mg-Si-Cu alloy by energy-filtered transmission electron microscopy. By contrast, in a Cu-free Al-Mg-Si alloy no segregation was observed at the interface between the matrix and Type-C precipitate

Effect of Al-5Ti-0.62C-0.2Ce Master Alloy on the Microstructure and Tensile Properties of Commercial Pure Al and Hypoeutectic Al-8Si Alloy

Directory of Open Access Journals (Sweden)

Wanwu Ding

2017-06-01

Full Text Available Al-5Ti-0.62C-0.2Ce master alloy was synthesized by a method of thermal explosion reaction in pure molten aluminum and used to modify commercial pure Al and hypoeutectic Al-8Si alloy. The microstructure and tensile properties of commercial pure Al and hypoeutectic Al-8Si alloy with different additions of Al-5Ti-0.62C-0.2Ce master alloy were investigated. The results show that the Al-5Ti-0.62C-0.2Ce alloy was composed of α-Al, granular TiC, lump-like TiAl3 and block-like Ti2Al20Ce. Al-5Ti-0.62C-0.2Ce master alloy (0.3 wt %, 5 min can significantly refine macro grains of commercial pure Al into tiny equiaxed grains. The Al-5Ti-0.62C-0.2Ce master alloy (0.3 wt %, 30 min still has a good refinement effect. The tensile strength and elongation of commercial pure Al modified by the Al-5Ti-0.62C-0.2Ce master alloy (0.3 wt %, 5 min increased by roughly 19.26% and 61.83%, respectively. Al-5Ti-0.62C-0.2Ce master alloy (1.5 wt %, 10 min can significantly refine both α-Al grains and eutectic Si of hypoeutectic Al-8Si alloy. The dendritic α-Al grains were significantly refined to tiny equiaxed grains. The morphology of the eutectic Si crystals was significantly refined from coarse needle-shape or lath-shape to short rod-like or grain-like eutectic Si. The tensile strength and elongation of hypoeutectic Al-8Si alloy modified by the Al-5Ti-0.62C-0.2Ce master alloy (1.5 wt %, 10 min increased by roughly 20.53% and 50%, respectively. The change in mechanical properties corresponds to evolution of the microstructure.

Tailoring ultrafine grained and dispersion-strengthened Ti2AlC/TiAl ...

Indian Academy of Sciences (India)

and Ti-Al pre-alloyed powders at low temperature of 1150◦C. The composite mainly consisted ... Metal–matrix composites; mechanical properties; microstructures; sintering. 1. Introduction γ-TiAl-based intermetallic alloys have been extensively.

Stagnation of the exploitation of Al ores and the depression of world prices of Al

Directory of Open Access Journals (Sweden)

Slavkovský Jozef

1999-03-01

Full Text Available In the contribution, data on Al – a metal of the 20th century are compiled together with the problems of genesis of the Al mineral raw ma-terials as well as types of bauxite and Al-laterite deposits. Furthermore, an overview of the world exploitation of bauxite during 1935-1980 is given along with the prognoses to 2000 and present situation (1992-1996. Overviews of the production of Al follows, providing its rela-tion to the bauxite exploitation. Contrary to the prognoses, a stabilization or stagnation has been observed in the exploitation of bauxite and production of Al during nineties, which a tendency is directly reflected in the world price of this commodity. When analyzing the Al prices for a longer period, some serious deviations can be noticed, that however presently represent a long-term minimum. We hope the stagnation of the production and the price decline are only temporary and new possibilities of the utilization of Al will be found soon.

A study on preparation and hydriding of β-Mg2Al3 and γ-Mg17Al12

International Nuclear Information System (INIS)

Hadi Suwarno

2009-01-01

The mechanism of the synthetic formation of β-Mg 2 Al 3 and γ-Mg 17 Al 12 has been studied. Mechanical alloying of Mg and Al powders with the atomic ratio of Mg:Al = 2:3 in toluene solution yields β-Mg 2 Al 3 compound after milling for 30 h. The γ-Mg 17 Al 12 can be formed by heating the β-Mg 2 Al 3 at 430°C under high vacuum. The measured hydrogen capacities of β-Mg 2 Al 3 and γ-Mg 17 Al 12 as hydride at 300°C are 3.2 and 4.9 wt%, respectively. Microstructure of the Mg-Al specimen shows that on hydriding at 300°C the polygonal shape of the γ-Mg 17 Al 12 changes into irregular shapes which are composed of γ-MgH 2 and Al. (author)

Marinbiologisk optegnelse i NUḪBAT AL-DAHR FĪ ʿAǦ ʾIB AL-BARR WA-AL-BAḤR

OpenAIRE

Provencal, Philippe

2014-01-01

I det arabiske geografiske værk NUḪBAT AL-DAHR FĪ ʿAǦ ʾIB AL-BARR WA-AL-BAḤR (færdigskrevet mellem 1324 og 1327) fra omtales seks dyr fra Adenbugten. Det dreje sig om savrokke, kuglefisk, pilrokke, pindsvinefisk og hvalhaj. Det sidste dyr har ikke kunnet bestemmes. Artiklen bringer en oversættelse af optegnelsen til engelsk samt både en filologisk som en biologisk kommentar. The aim of this article is to present a medieval Arabic report regarding sixanimals from the Gulf of Aden, to provid...