WorldWideScience

Sample records for cost-effective integrated reservoir

  1. APPLICATION OF INTEGRATED RESERVOIR MANAGEMENT AND RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Jack Bergeron; Tom Blasingame; Louis Doublet; Mohan Kelkar; George Freeman; Jeff Callard; David Moore; David Davies; Richard Vessell; Brian Pregger; Bill Dixon; Bryce Bezant

    2000-03-01

    , and to monitor pressure and preferential fluid movement in the reservoir is demonstrated. These techniques are: long-term production and injection data analysis, pressure transient analysis, and advanced open and cased hole well log analysis. The major contribution of this project is to demonstrate the use of cost effective reservoir characterization and management tools that will be helpful to both independent and major operators for the optimal development of heterogeneous, low permeability carbonate reservoirs such as the North Robertson (Clearfork) Unit.

  2. Can re-regulation reservoirs and batteries cost-effectively mitigate sub-daily hydropeaking?

    Science.gov (United States)

    Haas, J.; Nowak, W.; Anindito, Y.; Olivares, M. A.

    2017-12-01

    To compensate for mismatches between generation and load, hydropower plants frequently operate in strong hydropeaking schemes, which is harmful to the downstream ecosystem. Furthermore, new power market structures and variable renewable systems may exacerbate this behavior. Ecological constraints (minimum flows, maximum ramps) are frequently used to mitigate hydropeaking, but these stand in direct tradeoff with the operational flexibility required for integrating renewable technologies. Fortunately, there are also physical methods (i.e. re-regulation reservoirs and batteries) but to date, there are no studies about their cost-effectiveness for hydropeaking mitigation. This study aims to fill that gap. For this, we formulate an hourly mixed-integer linear optimization model to plan the weekly operation of a hydro-thermal-renewable power system from southern Chile. The opportunity cost of water (needed for this weekly scheduling) is obtained from a mid-term programming solved with dynamic programming. We compare the current (unconstrained) hydropower operation with an ecologically constrained operation. The resulting cost increase is then contrasted with the annual payments necessary for the physical hydropeaking mitigation options. For highly constrained operations, both re-regulation reservoirs and batteries show to be economically attractive for hydropeaking mitigation. For intermediate constrained scenarios, re-regulation reservoirs are still economic, whereas batteries can be a viable solution only if they become cheaper in future. Given current cost projections, their break-even point (for hydropeaking mitigation) is expected within the next ten years. Finally, less stringent hydropeaking constraints do not justify physical mitigation measures, as the necessary flexibility can be provided by other power plants of the system.

  3. Exploring cost-effective maize integrated weed management ...

    African Journals Online (AJOL)

    Several production constraints have led to low yields (< 2.5 t ha-1) in maize (Zea mays L.) inUganda, among which are weeds. This study investigated the most cost-effective integrated weedmanagement (IWM) approach in maize in eastern Uganda. An experiment was conducted atIkulwe station, Mayuge in 2011 and 2012 ...

  4. SEA-MAP: A cost effective method for production from deepwater reservoirs

    International Nuclear Information System (INIS)

    Wybro, P.G.; Chaisson, M.

    1994-01-01

    SEA Engineering Marginal field Autonomous Production (SEAMAP) based on a small tension leg platform is a concept for commercially viable production from deepwater reservoirs. Considerable engineering effort has and is still being made to find ways of commercially developing the deepwater Gulf of Mexico reserves. The limited number of actual deepwater developments would appear to indicate the energy industry at present remains reluctant to proceed with the development of many of the known discoveries. The major deterrents have been the major investment required in order to implement the development plans combined with uncertainties regarding reservoir performance. Mindful of this situation, SEA-MAP evolved from a perceived need for a low cost deepwater production system viable for relatively small reserves. The capital risk exposure is more sustainable and the major part of the facilities can be relocated to another site. Conversely, field production can be increased at a later stage with additional SEA-MAP platforms SEA-MAP offers a potential means, with minimum capital expenditure, of initiating production autonomously from a deepwater field, obtaining reservoir data and thereafter producing and performing workover activities during the field life. After producing from the field for a period, it may be determined that additional wells are needed. Such a situation leads into a logical phased development comprising more than one small platform or the relocation of an existing structure. Deepwater development can thus be approached cautiously, with minimized capital risk, minimal start-up investment and subsequent self-financing phased production

  5. Cost-Effective Manufacturing of Damage-Tolerant Integral Armor

    National Research Council Canada - National Science Library

    Fink, Bruce

    2000-01-01

    The U.S. Army Research Laboratory (ARL) and the University of Delaware (UD) have developed an enabling technology to produce a polymer matrix composite-based integral armor with improved multihit ballistic capability...

  6. Cost-Effective Manufacturing of Damage-Tolerant Integral Armor

    National Research Council Canada - National Science Library

    Fink, Bruce

    2000-01-01

    ...) technology demonstrator and Crusader self-propelled howitzer platforms. Present integral armor manufacturing processes involve adhesive bonding of a composite structure with ballistic armor tiles, spall shield, and nuisance cover...

  7. Application of integrated reservoir management and reservoir characterization to optimize infill drilling, Class II

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, Jack; Blasingame, Tom; Doublet, Louis; Kelkar, Mohan; Freeman, George; Callard, Jeff; Moore, David; Davies, David; Vessell, Richard; Pregger, Brian; Dixon, Bill; Bezant, Bryce

    2000-03-16

    The major purpose of this project was to demonstrate the use of cost effective reservoir characterization and management tools that will be helpful to both independent and major operators for the optimal development of heterogeneous, low permeability carbonate reservoirs such as the North Robertson (Clearfork) Unit.

  8. Cost Effective Surfactant Formulations for Improved Oil Recovery in Carbonate Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    William A. Goddard; Yongchun Tang; Patrick Shuler; Mario Blanco; Yongfu Wu

    2007-09-30

    This report summarizes work during the 30 month time period of this project. This was planned originally for 3-years duration, but due to its financial limitations, DOE halted funding after 2 years. The California Institute of Technology continued working on this project for an additional 6 months based on a no-cost extension granted by DOE. The objective of this project is to improve the performance of aqueous phase formulations that are designed to increase oil recovery from fractured, oil-wet carbonate reservoir rock. This process works by increasing the rate and extent of aqueous phase imbibition into the matrix blocks in the reservoir and thereby displacing crude oil normally not recovered in a conventional waterflood operation. The project had three major components: (1) developing methods for the rapid screening of surfactant formulations towards identifying candidates suitable for more detailed evaluation, (2) more fundamental studies to relate the chemical structure of acid components of an oil and surfactants in aqueous solution as relates to their tendency to wet a carbonate surface by oil or water, and (3) a more applied study where aqueous solutions of different commercial surfactants are examined for their ability to recover a West Texas crude oil from a limestone core via an imbibition process. The first item, regarding rapid screening methods for suitable surfactants has been summarized as a Topical Report. One promising surfactant screening protocol is based on the ability of a surfactant solution to remove aged crude oil that coats a clear calcite crystal (Iceland Spar). Good surfactant candidate solutions remove the most oil the quickest from the surface of these chips, plus change the apparent contact angle of the remaining oil droplets on the surface that thereby indicate increased water-wetting. The other fast surfactant screening method is based on the flotation behavior of powdered calcite in water. In this test protocol, first the calcite

  9. A Methodology to Integrate Security and Cost-effectiveness in ATM

    OpenAIRE

    Matarese, Francesca; Montefusco, Patrizia; Neves, José; Rocha, André

    2014-01-01

    The objective of this paper is the definition of a new methodology for carrying out security risk assessment in the air traffic management (ATM) domain so as to enhance security awareness and integrate secure and cost-effective design objectives. This process is carried out by modelling the system, identifying the assets, threats and vulnerabilities, prioritizing the threats and proposing cost-effective countermeasures for the weaknesses found. ATM security is concerned with securing ATM a...

  10. Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

    Science.gov (United States)

    Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

    2015-09-15

    This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. The costs and cost-effectiveness of an integrated sepsis treatment protocol.

    Science.gov (United States)

    Talmor, Daniel; Greenberg, Dan; Howell, Michael D; Lisbon, Alan; Novack, Victor; Shapiro, Nathan

    2008-04-01

    Sepsis is associated with high mortality and treatment costs. International guidelines recommend the implementation of integrated sepsis protocols; however, the true cost and cost-effectiveness of these are unknown. To assess the cost-effectiveness of an integrated sepsis protocol, as compared with conventional care. Prospective cohort study of consecutive patients presenting with septic shock and enrolled in the institution's integrated sepsis protocol. Clinical and economic outcomes were compared with a historical control cohort. Beth Israel Deaconess Medical Center. Overall, 79 patients presenting to the emergency department with septic shock in the treatment cohort and 51 patients in the control group. An integrated sepsis treatment protocol incorporating empirical antibiotics, early goal-directed therapy, intensive insulin therapy, lung-protective ventilation, and consideration for drotrecogin alfa and steroid therapy. In-hospital treatment costs were collected using the hospital's detailed accounting system. The cost-effectiveness analysis was performed from the perspective of the healthcare system using a lifetime horizon. The primary end point for the cost-effectiveness analysis was the incremental cost per quality-adjusted life year gained. Mortality in the treatment group was 20.3% vs. 29.4% in the control group (p = .23). Implementing an integrated sepsis protocol resulted in a mean increase in cost of approximately $8,800 per patient, largely driven by increased intensive care unit length of stay. Life expectancy and quality-adjusted life years were higher in the treatment group; 0.78 and 0.54, respectively. The protocol was associated with an incremental cost of $11,274 per life-year saved and a cost of $16,309 per quality-adjusted life year gained. In patients with septic shock, an integrated sepsis protocol, although not cost-saving, appears to be cost-effective and compares very favorably to other commonly delivered acute care interventions.

  12. Cost, cost-efficiency and cost-effectiveness of integrated family planning and HIV services.

    Science.gov (United States)

    Shade, Starley B; Kevany, Sebastian; Onono, Maricianah; Ochieng, George; Steinfeld, Rachel L; Grossman, Daniel; Newmann, Sara J; Blat, Cinthia; Bukusi, Elizabeth A; Cohen, Craig R

    2013-10-01

    To evaluate costs, cost-efficiency and cost-effectiveness of integration of family planning into HIV services. Integration of family planning services into HIV care and treatment clinics. A cluster-randomized trial. Twelve health facilities in Nyanza, Kenya were randomized to integrate family planning into HIV care and treatment; six health facilities were randomized to (nonintegrated) standard-of-care with separately delivered family planning and HIV services. We assessed costs, cost-efficiency (cost per additional use of more effective family planning), and cost-effectiveness (cost per pregnancy averted) associated with the first year of integration of family planning into HIV care. More effective family planning methods included oral and injectable contraceptives, subdermal implants, intrauterine device, and female and male sterilization. We collected cost data through interviews with study staff and review of financial records to determine costs of service integration. Integration of services was associated with an average marginal cost of $841 per site and $48 per female patient. Average overall and marginal costs of integration were associated with personnel costs [initial ($1003 vs. $872) and refresher ($498 vs. $330) training, mentoring ($1175 vs. $902) and supervision ($1694 vs. $1636)], with fewer resources required for other fixed ($18 vs. $0) and recurring expenses ($471 vs. $287). Integration was associated with a marginal cost of $65 for each additional use of more effective family planning and $1368 for each pregnancy averted. Integration of family planning and HIV services is feasible, inexpensive to implement, and cost-efficient in the Kenyan setting, and thus supports current Kenyan integration policy.

  13. Cost-effectiveness optimization of a solar hot water heater with integrated storage system

    International Nuclear Information System (INIS)

    Kamaruzzaman Sopian; Syahri, M.; Shahrir, A.; Mohd Yusof Othman; Baharuddin Yatim

    2006-01-01

    Solar processes are generally characterized by high first cost and low operating costs. Therefore, the basic economic problem is one of comparing an initial known investment with estimated future operating cost. This paper present the cost-benefit ratio of solar collector with integrated storage system. Evaluation of the annual cost (AC) and the annual energy gain (AEG) of the collector are performed and the ratio of AC/AEG or the cost benefit ratio is presented for difference combination of mass flow rate, solar collector length and channel depth. Using these cost-effectiveness curves, the user can select optimum design features, which correspond to minimum AC/AEG

  14. Cost-Effective Integration of Efficient Low-Lift Base Load Cooling Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Winiarski, David W.; Katipamula, Srinivas; Armstrong, Peter R.

    2008-01-14

    The long-term goal of DOE’s Commercial Buildings Integration subprogram is to develop cost-effective technologies and building practices that will enable the design and construction of net Zero Energy Buildings — commercial buildings that produce as much energy as they use on an annual basis — by 2025. To support this long-term goal, DOE further called for — as part of its FY07 Statement of Needs — the development by 2010 of “five cost-effective design technology option sets using highly efficient component technologies, integrated controls, improved construction practices, streamlined commissioning, maintenance and operating procedures that will make new and existing commercial buildings durable, healthy and safe for occupants.” In response, PNNL proposed and DOE funded a scoping study investigation of one such technology option set, low-lift cooling, that offers potentially exemplary HVAC energy performance relative to ASHRAE Standard 90.1-2004. The primary purpose of the scoping study was to estimate the national technical energy savings potential of this TOS.

  15. International lessons in new methods for grading and integrating cost effectiveness evidence into clinical practice guidelines

    DEFF Research Database (Denmark)

    Antioch, Kathryn M; Drummond, Michael F; Niessen, Louis W

    2017-01-01

    Economic evidence is influential in health technology assessment world-wide. Clinical Practice Guidelines (CPG) can enable economists to include economic information on health care provision. Application of economic evidence in CPGs, and its integration into clinical practice and national decisio......-of-life, budget impact, cost-effective ratios, net benefits and disparities in access and outcomes. Priority setting remains essential and trade-off decisions between policy criteria can be based on MCDA, both in evidence based clinical medicine and in health planning....... that scores that checklist for grading studies, when assessing economic evidence. Cost-effectiveness Analysis (CEA) thresholds, opportunity cost and willingness-to-pay (WTP) are crucial issues for decision rules in CEA generally, including end-of-life therapies. Limitations of inter-rater reliability......, logistics, innovation price, price sensitivity, substitutes and complements, WTP, absenteeism and presentism. Supply issues may include economies of scale, efficiency changes, and return on investment. Involved equity and efficiency measures may include cost-of-illness, disease burden, quality...

  16. Sensor Technology Integration for Efficient and Cost-Effective D and D

    International Nuclear Information System (INIS)

    Varona, J. M.; Lagos, L. E.

    2002-01-01

    The deactivation and decommissioning of radiologically contaminated facilities require the use of a multitude of technologies to perform characterization, decontamination, dismantlement, and waste management. Current baseline technologies do not provide adequate tools to perform this work in an efficient and cost-effective manner. Examples of such tasks that can be modified to enhance the D and D work include: floor and wall decontamination, pipe decontamination, and surveillance and monitoring. FIU-HCET's Technology Development, Integration and Deployment (TDID) group aims to enhance the D and D process by integrating sensor technology to existing decontamination and remote surveillance tools. These integrated systems have been demonstrated throughout the DOE Complex and commercial nuclear facilities undergoing decommissioning. Finding new ways of integrating technologies utilized in the decommissioning and surveillance and monitoring process has been a goal of this group during the past several years. Current and previous integration projects include: Mobile Integrated Piping Decontamination and Characterization System, On-Line Decontamination and Characterization System, In-Situ Pipe Decontamination and Unplugging System, Remote Hazardous Environment Surveyor (RHES), and the Online Handheld grit blasting decontamination system As a result of integrating sensors with D and D tools, the resulting technologies have removed the downtime currently found in baseline processes by allowing operators and project managers to have real-time contamination data during the specified D and D process. This added component allows project managers to verify that full decontamination and surveillance has been conducted. Through successful demonstration and deployments of the TDID-developed technologies, FIU-HCET has provided tools that can impact the cost, schedule and health and safety of D and D operations in a positive way, leading to shorter downtimes and significant cost

  17. The effectiveness and cost-effectiveness of an integrated cardiometabolic risk assessment and treatment program in primary care (the INTEGRATE study).

    NARCIS (Netherlands)

    Stol, D.; Badenbroek, I.; Hollander, M.; Nielen, M.; Schellevis, F.; Wit, N. de

    2014-01-01

    The effectiveness and cost-effectiveness of an integrated cardiometabolic risk assessment and treatment program in primary care (the INTEGRATE study): a stepped-wedge randomized controlled trial protocol. Rationale: The increasing prevalence of cardiometabolic disease (CMD), including cardiovascular

  18. Improved characterization of reservoir behavior by integration of reservoir performances data and rock type distributions

    Energy Technology Data Exchange (ETDEWEB)

    Davies, D.K.; Vessell, R.K. [David K. Davies & Associates, Kingwood, TX (United States); Doublet, L.E. [Texas A& M Univ., College Station, TX (United States)] [and others

    1997-08-01

    An integrated geological/petrophysical and reservoir engineering study was performed for a large, mature waterflood project (>250 wells, {approximately}80% water cut) at the North Robertson (Clear Fork) Unit, Gaines County, Texas. The primary goal of the study was to develop an integrated reservoir description for {open_quotes}targeted{close_quotes} (economic) 10-acre (4-hectare) infill drilling and future recovery operations in a low permeability, carbonate (dolomite) reservoir. Integration of the results from geological/petrophysical studies and reservoir performance analyses provide a rapid and effective method for developing a comprehensive reservoir description. This reservoir description can be used for reservoir flow simulation, performance prediction, infill targeting, waterflood management, and for optimizing well developments (patterns, completions, and stimulations). The following analyses were performed as part of this study: (1) Geological/petrophysical analyses: (core and well log data) - {open_quotes}Rock typing{close_quotes} based on qualitative and quantitative visualization of pore-scale features. Reservoir layering based on {open_quotes}rock typing {close_quotes} and hydraulic flow units. Development of a {open_quotes}core-log{close_quotes} model to estimate permeability using porosity and other properties derived from well logs. The core-log model is based on {open_quotes}rock types.{close_quotes} (2) Engineering analyses: (production and injection history, well tests) Material balance decline type curve analyses to estimate total reservoir volume, formation flow characteristics (flow capacity, skin factor, and fracture half-length), and indications of well/boundary interference. Estimated ultimate recovery analyses to yield movable oil (or injectable water) volumes, as well as indications of well and boundary interference.

  19. Integrated, long term, sustainable, cost effective biosolids management at a large Canadian wastewater treatment facility.

    Science.gov (United States)

    Leblanc, R J; Allain, C J; Laughton, P J; Henry, J G

    2004-01-01

    The Greater Moncton Sewerage Commission's 115,000 m3/d advanced, chemically assisted primary wastewater treatment facility located in New Brunswick, Canada, has developed an integrated, long term, sustainable, cost effective programme for the management and beneficial utilization of biosolids from lime stabilized raw sludge. The paper overviews biosolids production, lime stabilization, conveyance, and odour control followed by an indepth discussion of the wastewater sludge as a resource programme, namely: composting, mine site reclamation, landfill cover, land application for agricultural use, tree farming, sod farm base as a soil enrichment, topsoil manufacturing. The paper also addresses the issues of metals, pathogens, organic compounds, the quality control program along with the regulatory requirements. Biosolids capital and operating costs are presented. Research results on removal of metals from primary sludge using a unique biological process known as BIOSOL as developed by the University of Toronto, Canada to remove metals and destroy pathogens are presented. The paper also discusses an ongoing cooperative research project with the Université de Moncton where various mixtures of plant biosolids are composted with low quality soil. Integration, approach to sustainability and "cumulative effects" as part of the overall biosolids management strategy are also discussed.

  20. A cost-effective technique for integrating personal radiation dose assessment with personal gravimetric sampling

    International Nuclear Information System (INIS)

    Strydom, R.; Rolle, R.; Van der Linde, A.

    1992-01-01

    During recent years there has been an increasing awareness internationally of radiation levels in the mining and milling of radioactive ores, including those from non-uranium mines. A major aspect of radiation control is concerned with the measurement of radiation levels and the assessment of radiation doses incurred by individual workers. Current techniques available internationally for personnel monitoring of radiation exposures are expensive and there is a particular need to reduce the cost of personal radiation monitoring in South African gold mines because of the large labour force employed. In this regard the obvious benefits of integrating personal radiation monitoring with existing personal monitoring systems already in place in South African gold mines should be exploited. A system which can be utilized for this purpose is personal gravimetric sampling. A new cost-effective technique for personal radiation monitoring, which can be fully integrated with the personal gravimetric sampling strategy being implemented on mines, has been developed in South Africa. The basic principles of this technique and its potential in South African mines are described. 9 refs., 7 figs

  1. Integrated, long term, sustainable, cost effective biosolids management at a large Canadian wastewater treatment facility

    Energy Technology Data Exchange (ETDEWEB)

    LeBlance, R.J.; Allain, C.J.; Laughton, P.J.; Henry, J.G.

    2003-07-01

    The Greater Moncton Sewerage Commission's 115 000 m{sup 3}/d advanced, chemically assisted primary wastewater treatment facility located in New Brunswick, Canada, has developed an integrated, long term, sustainable, cost effective programme for the management and beneficial utilization of biosolids from lime stabilized raw sludge. The paper overviews biosolids production, lime stabilization, conveyance, and odour control followed by an indepth discussion of the wastewater sludge as a resource programme, namely: composting, mine site reclamation, landfill cover, land application for agricultural use, tree farming, sod farm base as a soil enrichment, topsoil manufacturing. The paper also addresses the issues of metals, pathogens, organic compounds, the quality control program along with the regulatory requirements. Biosolids capital and operating costs are presented. Research results on removal of metals from primary sludge using a unique biological process known as BIOSOL as developed by the University of Toronto, Canada to remove metals and destroy pathogens are presented. The paper also discusses an ongoing cooperative research project with the Universite de Moncton where various mixtures of plant biosolids are composted with low quality soil. Integration, approach to sustainability and ''cumulative effects'' as part of the overall biosolids management strategy is also discussed. (author)

  2. International lessons in new methods for grading and integrating cost effectiveness evidence into clinical practice guidelines.

    Science.gov (United States)

    Antioch, Kathryn M; Drummond, Michael F; Niessen, Louis W; Vondeling, Hindrik

    2017-01-01

    Economic evidence is influential in health technology assessment world-wide. Clinical Practice Guidelines (CPG) can enable economists to include economic information on health care provision. Application of economic evidence in CPGs, and its integration into clinical practice and national decision making is hampered by objections from professions, paucity of economic evidence or lack of policy commitment. The use of state-of-art economic methodologies will improve this. Economic evidence can be graded by 'checklists' to establish the best evidence for decision making given methodological rigor. New economic evaluation checklists, Multi-Criteria Decision Analyses (MCDA) and other decision criteria enable health economists to impact on decision making world-wide. We analyse the methodologies for integrating economic evidence into CPG agencies globally, including the Agency of Health Research and Quality (AHRQ) in the USA, National Health and Medical Research Council (NHMRC) and Australian political reforms. The Guidelines and Economists Network International (GENI) Board members from Australia, UK, Canada and Denmark presented the findings at the conference of the International Health Economists Association (IHEA) and we report conclusions and developments since. The Consolidated Guidelines for the Reporting of Economic Evaluations (CHEERS) 24 item check list can be used by AHRQ, NHMRC, other CPG and health organisations, in conjunction with the Drummond ten-point check list and a questionnaire that scores that checklist for grading studies, when assessing economic evidence. Cost-effectiveness Analysis (CEA) thresholds, opportunity cost and willingness-to-pay (WTP) are crucial issues for decision rules in CEA generally, including end-of-life therapies. Limitations of inter-rater reliability in checklists can be addressed by including more than one assessor to reach a consensus, especially when impacting on treatment decisions. We identify priority areas to generate

  3. The integrated business information system: using automation to monitor cost-effectiveness of park operations

    Science.gov (United States)

    Dick Stanley; Bruce Jackson

    1995-01-01

    The cost-effectiveness of park operations is often neglected because information is laborious to compile. The information, however, is critical if we are to derive maximum benefit from scarce resources. This paper describes an automated system for calculating cost-effectiveness ratios with minimum effort using data from existing data bases.

  4. Integration of rock typing methods for carbonate reservoir characterization

    International Nuclear Information System (INIS)

    Aliakbardoust, E; Rahimpour-Bonab, H

    2013-01-01

    Reservoir rock typing is the most important part of all reservoir modelling. For integrated reservoir rock typing, static and dynamic properties need to be combined, but sometimes these two are incompatible. The failure is due to the misunderstanding of the crucial parameters that control the dynamic behaviour of the reservoir rock and thus selecting inappropriate methods for defining static rock types. In this study, rock types were defined by combining the SCAL data with the rock properties, particularly rock fabric and pore types. First, air-displacing-water capillary pressure curues were classified because they are representative of fluid saturation and behaviour under capillary forces. Next the most important rock properties which control the fluid flow and saturation behaviour (rock fabric and pore types) were combined with defined classes. Corresponding petrophysical properties were also attributed to reservoir rock types and eventually, defined rock types were compared with relative permeability curves. This study focused on representing the importance of the pore system, specifically pore types in fluid saturation and entrapment in the reservoir rock. The most common tests in static rock typing, such as electrofacies analysis and porosity–permeability correlation, were carried out and the results indicate that these are not appropriate approaches for reservoir rock typing in carbonate reservoirs with a complicated pore system. (paper)

  5. The (cost-)effectiveness of preventive, integrated care for community-dwelling frail older people: A systematic review.

    Science.gov (United States)

    Looman, Wilhelmina Mijntje; Huijsman, Robbert; Fabbricotti, Isabelle Natalina

    2018-04-17

    Integrated care is increasingly promoted as an effective and cost-effective way to organise care for community-dwelling frail older people with complex problems but the question remains whether high expectations are justified. Our study aims to systematically review the empirical evidence for the effectiveness and cost-effectiveness of preventive, integrated care for community-dwelling frail older people and close attention is paid to the elements and levels of integration of the interventions. We searched nine databases for eligible studies until May 2016 with a comparison group and reporting at least one outcome regarding effectiveness or cost-effectiveness. We identified 2,998 unique records and, after exclusions, selected 46 studies on 29 interventions. We assessed the quality of the included studies with the Effective Practice and Organization of Care risk-of-bias tool. The interventions were described following Rainbow Model of Integrated Care framework by Valentijn. Our systematic review reveals that the majority of the reported outcomes in the studies on preventive, integrated care show no effects. In terms of health outcomes, effectiveness is demonstrated most often for seldom-reported outcomes such as well-being. Outcomes regarding informal caregivers and professionals are rarely considered and negligible. Most promising are the care process outcomes that did improve for preventive, integrated care interventions as compared to usual care. Healthcare utilisation was the most reported outcome but we found mixed results. Evidence for cost-effectiveness is limited. High expectations should be tempered given this limited and fragmented evidence for the effectiveness and cost-effectiveness of preventive, integrated care for frail older people. Future research should focus on unravelling the heterogeneity of frailty and on exploring what outcomes among frail older people may realistically be expected. © 2018 The Authors. Health and Social Care in the Community

  6. The Albufera Initiative for Biodiversity: a cost effective model for integrating science and volunteer participation in coastal protected area management

    NARCIS (Netherlands)

    Riddiford, N.J.; Veraart, J.A.; Férriz, I.; Owens, N.W.; Royo, L.; Honey, M.R.

    2014-01-01

    This paper puts forward a multi-disciplinary field project, set up in 1989 at the Parc Natural de s’Albufera in Mallorca, Balearic Islands, Spain, as an example of a cost effective model for integrating science and volunteer participation in a coastal protected area. Outcomes include the provision

  7. Putting integrated reservoir characterization into practice - in house training

    Energy Technology Data Exchange (ETDEWEB)

    Wright, F.M. Jr.; Best, D.A.; Clarke, R.T. [Mobile Exploration and Producing Technical Center, Dallas, TX (United States)

    1997-08-01

    The need for even more efficient reservoir characterization and management has forced a change in the way Mobil Oil provides technical support to its production operations. We`ve learned that to be successful, a good understanding of the reservoir is essential. This includes an understanding of the technical and business significance of reservoir heterogeneities at different stages of field development. A multi-disciplinary understanding of the business of integrated reservoir characterization is essential and to facilitate this understanding, Mobil has developed a highly successful {open_quotes}Reservoir Characterization Field Seminar{close_quotes}. Through specific team based case studies that incorporate outcrop examples and data the program provides participants the opportunity to explore historic and alternative approaches to reservoir description, characterization and management. We explore appropriate levels and timing of data gathering, technology applications, risk assessment and management practices at different stages of field development. The case studies presented throughout the course are a unique element of the program which combine real life and hypothetical problem sets that explore how different technical disciplines interact, the approaches to a problem solving they use, the assumptions and uncertainties contained in their contributions and the impact those conclusions may have on other disciplines involved in the overall reservoir management process. The team building aspect of the course was an added bonus.

  8. Data Integration for the Generation of High Resolution Reservoir Models

    Energy Technology Data Exchange (ETDEWEB)

    Albert Reynolds; Dean Oliver; Gaoming Li; Yong Zhao; Chaohui Che; Kai Zhang; Yannong Dong; Chinedu Abgalaka; Mei Han

    2009-01-07

    The goal of this three-year project was to develop a theoretical basis and practical technology for the integration of geologic, production and time-lapse seismic data in a way that makes best use of the information for reservoir description and reservoir performance predictions. The methodology and practical tools for data integration that were developed in this research project have been incorporated into computational algorithms that are feasible for large scale reservoir simulation models. As the integration of production and seismic data require calibrating geological/geostatistical models to these data sets, the main computational tool is an automatic history matching algorithm. The following specific goals were accomplished during this research. (1) We developed algorithms for calibrating the location of the boundaries of geologic facies and the distribution of rock properties so that production and time-lapse seismic data are honored. (2) We developed and implemented specific procedures for conditioning reservoir models to time-lapse seismic data. (3) We developed and implemented algorithms for the characterization of measurement errors which are needed to determine the relative weights of data when conditioning reservoir models to production and time-lapse seismic data by automatic history matching. (4) We developed and implemented algorithms for the adjustment of relative permeability curves during the history matching process. (5) We developed algorithms for production optimization which accounts for geological uncertainty within the context of closed-loop reservoir management. (6) To ensure the research results will lead to practical public tools for independent oil companies, as part of the project we built a graphical user interface for the reservoir simulator and history matching software using Visual Basic.

  9. Integrated Approach to Drilling Project in Unconventional Reservoir Using Reservoir Simulation

    Science.gov (United States)

    Stopa, Jerzy; Wiśniowski, Rafał; Wojnarowski, Paweł; Janiga, Damian; Skrzypaszek, Krzysztof

    2018-03-01

    Accumulation and flow mechanisms in unconventional reservoir are different compared to conventional. This requires a special approach of field management with drilling and stimulation treatments as major factor for further production. Integrated approach of unconventional reservoir production optimization assumes coupling drilling project with full scale reservoir simulation for determine best well placement, well length, fracturing treatment design and mid-length distance between wells. Full scale reservoir simulation model emulate a part of polish shale - gas field. The aim of this paper is to establish influence of technical factor for gas production from shale gas field. Due to low reservoir permeability, stimulation treatment should be direct towards maximizing the hydraulic contact. On the basis of production scenarios, 15 stages hydraulic fracturing allows boost gas production over 1.5 times compared to 8 stages. Due to the possible interference of the wells, it is necessary to determine the distance between the horizontal parts of the wells trajectories. In order to determine the distance between the wells allowing to maximize recovery factor of resources in the stimulated zone, a numerical algorithm based on a dynamic model was developed and implemented. Numerical testing and comparative study show that the most favourable arrangement assumes a minimum allowable distance between the wells. This is related to the volume ratio of the drainage zone to the total volume of the stimulated zone.

  10. Integration of dynamical data in a geostatistical model of reservoir; Integration des donnees dynamiques dans un modele geostatistique de reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Costa Reis, L.

    2001-01-01

    We have developed in this thesis a methodology of integrated characterization of heterogeneous reservoirs, from geologic modeling to history matching. This methodology is applied to the reservoir PBR, situated in Campos Basin, offshore Brazil, which has been producing since June 1979. This work is an extension of two other thesis concerning geologic and geostatistical modeling of the reservoir PBR from well data and seismic information. We extended the geostatistical litho-type model to the whole reservoir by using a particular approach of the non-stationary truncated Gaussian simulation method. This approach facilitated the application of the gradual deformation method to history matching. The main stages of the methodology for dynamic data integration in a geostatistical reservoir model are presented. We constructed a reservoir model and the initial difficulties in the history matching led us to modify some choices in the geological, geostatistical and flow models. These difficulties show the importance of dynamic data integration in reservoir modeling. The petrophysical property assignment within the litho-types was done by using well test data. We used an inversion procedure to evaluate the petrophysical parameters of the litho-types. The up-scaling is a necessary stage to reduce the flow simulation time. We compared several up-scaling methods and we show that the passage from the fine geostatistical model to the coarse flow model should be done very carefully. The choice of the fitting parameter depends on the objective of the study. In the case of the reservoir PBR, where water is injected in order to improve the oil recovery, the water rate of the producing wells is directly related to the reservoir heterogeneity. Thus, the water rate was chosen as the fitting parameter. We obtained significant improvements in the history matching of the reservoir PBR. First, by using a method we have proposed, called patchwork. This method allows us to built a coherent

  11. Cost-effective mapping of benthic habitats in inland reservoirs through split-beam sonar, indicator kriging, and historical geologic data.

    Directory of Open Access Journals (Sweden)

    Erik R Venteris

    Full Text Available Because bottom substrate composition is an important control on the temporal and spatial location of the aquatic community, accurate maps of benthic habitats of inland lakes and reservoirs provide valuable information to managers, recreational users, and scientists. Therefore, we collected vertical, split-beam sonar data (roughness [E1], hardness [E2], and bathymetry and sediment samples to make such maps. Statistical calibration between sonar parameters and sediment classes was problematic because the E1:E2 ratios for soft (muck and clay sediments overlapped a lower and narrower range for hard (gravel substrates. Thus, we used indicator kriging (IK to map the probability that unsampled locations did not contain coarse sediments. To overcome the calibration issue we tested proxies for the natural processes and anthropogenic history of the reservoir as potential predictive variables. Of these, a geologic map proved to be the most useful. The central alluvial valley and mudflats contained mainly muck and organic-rich clays. The surrounding glacial till and shale bedrock uplands contained mainly poorly sorted gravels. Anomalies in the sonar data suggested that the organic-rich sediments also contained trapped gases, presenting additional interpretive issues for the mapping. We extended the capability of inexpensive split-beam sonar units through the incorporation of historic geologic maps and other records as well as validation with dredge samples. Through the integration of information from multiple data sets, were able to objectively identify bottom substrate and provide reservoir users with an accurate map of available benthic habitat.

  12. Cost-Effective Mapping of Benthic Habitats in Inland Reservoirs through Split-Beam Sonar, Indicator Kriging, and Historical Geologic Data

    Energy Technology Data Exchange (ETDEWEB)

    Venteris, Erik R.; May, Cassandra

    2014-04-23

    Because bottom substrate composition is an important control on the temporal and spatial location of the aquatic community, accurate maps of benthic habitats of inland lakes and reservoirs provide valuable information to managers, recreational users, and scientists. Therefore, we collected vertical, split-beam sonar data (roughness [E1], hardness [E2], and bathymetry) and sediment samples to make such maps. Statistical calibration between sonar parameters and sediment classes was problematic because the E1:E2 ratios for soft (muck and clay) sediments overlapped a lower and narrower range for hard (gravel) substrates. Thus, we used indicator kriging (IK) to map the probability that unsampled locations did not contain coarse sediments. To overcome the calibration issue we tested proxies for the natural processes and anthropogenic history of the reservoir as potential predictive variables. Of these, a geologic map proved to be the most useful. The central alluvial valley and mudflats contained mainly muck and organic-rich clays. The surrounding glacial till and shale bedrock uplands contained mainly poorly sorted gravels. Anomalies in the sonar data suggested that the organic-rich sediments also contained trapped gases, presenting additional interpretive issues for the mapping. We extended the capability of inexpensive split-beam sonar units through the incorporation of historic geologic maps and other records as well as validation with dredge samples. Through the integration of information from multiple data sets, were able to objectively identify bottom substrate and provide reservoir users with an accurate map of available benthic habitat.

  13. Assessing the cost-effectiveness of electric vehicles in European countries using integrated modeling

    International Nuclear Information System (INIS)

    Seixas, J.; Simões, S.; Dias, L.; Kanudia, A.; Fortes, P.; Gargiulo, M.

    2015-01-01

    Electric vehicles (EVs) are considered alternatives to internal combustion engines due to their energy efficiency and contribution to CO 2 mitigation. The adoption of EVs depends on consumer preferences, including cost, social status and driving habits, although it is agreed that current and expected costs play a major role. We use a partial equilibrium model that minimizes total energy system costs to assess whether EVs can be a cost-effective option for the consumers of each EU27 member state up to 2050, focusing on the impact of different vehicle investment costs and CO 2 mitigation targets. We found that for an EU-wide greenhouse gas emission reduction cap of 40% and 70% by 2050 vis-à-vis 1990 emissions, battery electric vehicles (BEVs) are cost-effective in the EU only by 2030 and only if their costs are 30% lower than currently expected. At the EU level, vehicle costs and the capability to deliver both short- and long-distance mobility are the main drivers of BEV deployment. Other drivers include each state’s national mobility patterns and the cost-effectiveness of alternative mitigation options, both in the transport sector, such as plug-in hybrid electric vehicles (PHEVs) or biofuels, and in other sectors, such as renewable electricity. - Highlights: • Electric vehicles were assessed through the minimization of the total energy systems costs. • EU climate policy targets could act as a major driver for PHEV adoption. • Battery EV is an option before 2030 if costs will drop by 30% from expected costs. • EV deployment varies per country depending on each energy system configuration. • Incentives at the country level should consider specific cost-effectiveness factors

  14. Integrated cost-effectiveness analysis of greenhouse gas emission abatement. The case of Finland

    Energy Technology Data Exchange (ETDEWEB)

    Lehtilae, A.; Tuhkanen, S. [VTT Energy, Espoo (Finland). Energy Systems

    1999-11-01

    In Finland greenhouse gas emissions are expected to increase during the next decades due to economic growth, particularly in the energy intensive industrial sectors. The role of these industries is very central in the national economy. The emission control according to the Kyoto Protocol will therefore be quite difficult and costly. The study analyses the cost-effectiveness of different technical options for reducing the emissions of carbon dioxide, methane, and nitrous oxide in Finland. The analysis is performed with the help of a comprehensive energy system model for Finland, which has been extended to cover all major sources of methane and nitrous oxide emissions in the energy sector, industry, waste management and agriculture. The focus being on technical options, no consideration is given to possible policy measures, emission trading or joint implementation in the study. Under the boundary conditions given for the development of the Finnish energy economy, cost-effective technical measures in the energy system include increases in the use of wood biomass, natural gas and wind energy, increases in the contribution of CHP to the power supply, and intensified energy conservation in all end-use sectors. Additional cost-effective measures are landfill gas recovery, utilisation of the combustible fraction of waste and catalytic conversion of N{sub 2}O in nitric acid production. With baseline assumptions, the direct annual costs of emission abatement are calculated to be about 2000 MFIM (330 M{epsilon}) in 2010. The marginal costs are estimated to be about 230 FIM (40 {epsilon}) per tonne of CO{sub 2}-equivalent in 2010. The cost curie derived from the analysis could be used in further analyses concerning emissions trading. (orig.) 109 refs. SIHTI Research Programme

  15. A Methodology to Integrate Security and Cost-effectiveness in ATM

    Directory of Open Access Journals (Sweden)

    Francesca Matarese

    2014-01-01

    prioritizing the threats and proposing cost-effective countermeasures for the weaknesses found. ATM security is concerned with securing ATM assets in order to prevent threats and limit their effects on the overall aviation network. This effect limitation can be achieved by removing the vulnerability from the system and/or increasing the tolerance in case of component failures due to attacks. The security risk assessment methodology proposed is based on what is currently being done by the industry (the International Civil Aviation Organization (ICAO and the International Standard Organization (ISO, etc..

  16. Application of Integrated Reservoir Management and Reservoir Characterization to Optimize Infill Drilling

    Energy Technology Data Exchange (ETDEWEB)

    P. K. Pande

    1998-10-29

    Initial drilling of wells on a uniform spacing, without regard to reservoir performance and characterization, must become a process of the past. Such efforts do not optimize reservoir development as they fail to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, and carbonate reservoirs in particular. These reservoirs are typically characterized by: o Large, discontinuous pay intervals o Vertical and lateral changes in reservoir properties o Low reservoir energy o High residual oil saturation o Low recovery efficiency

  17. Integrated and Person-Centered Care for Community-Living Older Adults: A Cost-Effectiveness Study.

    Science.gov (United States)

    Uittenbroek, Ronald J; van Asselt, Antoinette D I; Spoorenberg, Sophie L W; Kremer, Hubertus P H; Wynia, Klaske; Reijneveld, Sijmen A

    2018-03-24

    To assess the cost-effectiveness of Embrace, an integrated primary care service for older adults. Care and support claims from health care insurers, long-term care administration, and municipalities for enrolled older adults between 2011 and 2013. A total of 1,456 older adults, listed with 15 general practitioners practices in the Netherlands, were stratified into risk profiles ("Robust," "Frail," and "Complex care needs") and randomized to Embrace or care-as-usual groups. Incremental costs were calculated per quality-adjusted life year, per day able to age in place, and per percentage point risk profile improvement. Total average costs were higher for Embrace compared to care-as-usual. Differences in health-associated outcomes were small and not statistically significant. Probabilities that Embrace is cost-effective were below 80 percent, except for "risk profile improvements" within risk profile "Complex care needs." Complete case analysis resulted in smaller differences in total average costs across conditions and differences in health-associated outcomes remained small. According to current standards, Embrace is not considered cost effective after 12 months. However, it could be considered worthwhile in terms of "risk profile improvements" for older adults with "Complex care needs," if society is willing to invest substantially. © Health Research and Educational Trust.

  18. Management of radioactive waste gases from PET radiopharmaceutical synthesis using cost effective capture systems integrated with a cyclotron safety system.

    Science.gov (United States)

    Stimson, D H R; Pringle, A J; Maillet, D; King, A R; Nevin, S T; Venkatachalam, T K; Reutens, D C; Bhalla, R

    2016-09-01

    The emphasis on the reduction of gaseous radioactive effluent associated with PET radiochemistry laboratories has increased. Various radioactive gas capture strategies have been employed historically including expensive automated compression systems. We have implemented a new cost-effective strategy employing gas capture bags with electronic feedback that are integrated with the cyclotron safety system. Our strategy is suitable for multiple automated 18 F radiosynthesis modules and individual automated 11 C radiosynthesis modules. We describe novel gas capture systems that minimize the risk of human error and are routinely used in our facility.

  19. The flying classroom - a cost effective integrated approach to learning and teaching flight dynamics

    Science.gov (United States)

    Bromfield, Michael A.; Belberov, Aleksandar

    2017-11-01

    In the UK, the Royal Aeronautical Society recommends the inclusion of practical flight exercises for accredited undergraduate aerospace engineering programmes to enhance learning and student experience. The majority of academic institutions teaching aerospace in the UK separate the theory and practice of flight dynamics with students attending a series of lectures supplemented by an intensive one-day flight exercise. Performance and/or handling qualities flight tests are performed in a dedicated aircraft fitted with specialist equipment for the recording and presentation of flight data. This paper describes an innovative approach to better integrate theory and practice and the use of portable Commercial-off-The-Shelf (COTS) technologies to enable a range of standard, unmodified aircraft to be used. The integration of theory and practice has enriched learning and teaching, improved coursework grades and the student experience. The use of COTS and unmodified aircraft has reduced costs and enabled increased student participation.

  20. A microbial fuel cell–membrane bioreactor integrated system for cost-effective wastewater treatment

    International Nuclear Information System (INIS)

    Wang, Yong-Peng; Liu, Xian-Wei; Li, Wen-Wei; Li, Feng; Wang, Yun-Kun; Sheng, Guo-Ping; Zeng, Raymond J.; Yu, Han-Qing

    2012-01-01

    Highlights: ► An MFC–MBR integrated system for wastewater treatment and electricity generation. ► Stable electricity generation during 1000-h continuous operation. ► Low-cost electrode, separator and filter materials were adopted. -- Abstract: Microbial fuel cell (MFC) and membrane bioreactor (MBR) are both promising technologies for wastewater treatment, but both with limitations. In this study, a novel MFC–MBR integrated system, which combines the advantages of the individual systems, was proposed for simultaneous wastewater treatment and energy recovery. The system favored a better utilization of the oxygen in the aeration tank of MBR by the MFC biocathode, and enabled a high effluent quality. Continuous and stable electricity generation, with the average current of 1.9 ± 0.4 mA, was achieved over a long period of about 40 days. The maximum power density reached 6.0 W m −3 . Moreover, low-cost materials were used for the reactor construction. This integrated system shows great promise for practical wastewater treatment application.

  1. Photonic Integrated Circuits for Cost-Effective, High Port Density, and Higher Capacity Optical Communications Systems

    Science.gov (United States)

    Chiappa, Pierangelo

    Bandwidth-hungry services, such as higher speed Internet, voice over IP (VoIP), and IPTV, allow people to exchange and store huge amounts of data among worldwide locations. In the age of global communications, domestic users, companies, and organizations around the world generate new contents making bandwidth needs grow exponentially, along with the need for new services. These bandwidth and connectivity demands represent a concern for operators who require innovative technologies to be ready for scaling. To respond efficiently to these demands, Alcatel-Lucent is fast moving toward photonic integration circuits technologies as the key to address best performances at the lowest "bit per second" cost. This article describes Alcatel-Lucent's contribution in strategic directions or achievements, as well as possible new developments.

  2. Shared visions: Partnership of Rockwell International and NASA Cost Effectiveness Enhancements (CEE) for the space shuttle system integration program

    Science.gov (United States)

    Bejmuk, Bohdan I.; Williams, Larry

    As a result of limited resources and tight fiscal constraints over the past several years, the defense and aerospace industries have experienced a downturn in business activity. The impact of fewer contracts being awarded has placed a greater emphasis for effectiveness and efficiency on industry contractors. It is clear that a reallocation of resources is required for America to continue to lead the world in space and technology. The key to technological and economic survival is the transforming of existing programs, such as the Space Shuttle Program, into more cost efficient programs so as to divert the savings to other NASA programs. The partnership between Rockwell International and NASA and their joint improvement efforts that resulted in significant streamlining and cost reduction measures to Rockwell International Space System Division's work on the Space Shuttle System Integration Contract is described. This work was a result of an established Cost Effectiveness Enhancement (CEE) Team formed initially in Fiscal Year 1991, and more recently expanded to a larger scale CEE Initiative in 1992. By working closely with the customer in agreeing to contract content, obtaining management endorsement and commitment, and involving the employees in total quality management (TQM) and continuous improvement 'teams,' the initial annual cost reduction target was exceeded significantly. The CEE Initiative helped reduce the cost of the Shuttle Systems Integration contract while establishing a stronger program based upon customer needs, teamwork, quality enhancements, and cost effectiveness. This was accomplished by systematically analyzing, challenging, and changing the established processes, practices, and systems. This examination, in nature, was work intensive due to the depth and breadth of the activity. The CEE Initiative has provided opportunities to make a difference in the way Rockwell and NASA work together - to update the methods and processes of the organizations

  3. Shared visions: Partnership of Rockwell International and NASA Cost Effectiveness Enhancements (CEE) for the space shuttle system integration program

    Science.gov (United States)

    Bejmuk, Bohdan I.; Williams, Larry

    1992-01-01

    As a result of limited resources and tight fiscal constraints over the past several years, the defense and aerospace industries have experienced a downturn in business activity. The impact of fewer contracts being awarded has placed a greater emphasis for effectiveness and efficiency on industry contractors. It is clear that a reallocation of resources is required for America to continue to lead the world in space and technology. The key to technological and economic survival is the transforming of existing programs, such as the Space Shuttle Program, into more cost efficient programs so as to divert the savings to other NASA programs. The partnership between Rockwell International and NASA and their joint improvement efforts that resulted in significant streamlining and cost reduction measures to Rockwell International Space System Division's work on the Space Shuttle System Integration Contract is described. This work was a result of an established Cost Effectiveness Enhancement (CEE) Team formed initially in Fiscal Year 1991, and more recently expanded to a larger scale CEE Initiative in 1992. By working closely with the customer in agreeing to contract content, obtaining management endorsement and commitment, and involving the employees in total quality management (TQM) and continuous improvement 'teams,' the initial annual cost reduction target was exceeded significantly. The CEE Initiative helped reduce the cost of the Shuttle Systems Integration contract while establishing a stronger program based upon customer needs, teamwork, quality enhancements, and cost effectiveness. This was accomplished by systematically analyzing, challenging, and changing the established processes, practices, and systems. This examination, in nature, was work intensive due to the depth and breadth of the activity. The CEE Initiative has provided opportunities to make a difference in the way Rockwell and NASA work together - to update the methods and processes of the organizations

  4. Integrated analysis of water quality parameters for cost-effective faecal pollution management in river catchments.

    Science.gov (United States)

    Nnane, Daniel Ekane; Ebdon, James Edward; Taylor, Huw David

    2011-03-01

    In many parts of the world, microbial contamination of surface waters used for drinking, recreation, and shellfishery remains a pervasive risk to human health, especially in Less Economically Developed Countries (LEDC). However, the capacity to provide effective management strategies to break the waterborne route to human infection is often thwarted by our inability to identify the source of microbial contamination. Microbial Source Tracking (MST) has potential to improve water quality management in complex river catchments that are either routinely, or intermittently contaminated by faecal material from one or more sources, by attributing faecal loads to their human or non-human sources, and thereby supporting more rational approaches to microbial risk assessment. The River Ouse catchment in southeast England (U.K.) was used as a model with which to investigate the integration and application of a novel and simple MST approach to monitor microbial water quality over one calendar year, thereby encompassing a range of meteorological conditions. A key objective of the work was to develop simple low-cost protocols that could be easily replicated. Bacteriophages (viruses) capable of infecting a human specific strain of Bacteroides GB-124, and their correlation with presumptive Escherichia coli, were used to distinguish sources of faecal pollution. The results reported here suggest that in this river catchment the principal source of faecal pollution in most instances was non-human in origin. During storm events, presumptive E. coli and presumptive intestinal enterococci levels were 1.1-1.2 logs higher than during dry weather conditions, and levels of the faecal indicator organisms (FIOs) were closely associated with increased turbidity levels (presumptive E. coli and turbidity, r = 0.43). Spatio-temporal variation in microbial water quality parameters was accounted for by three principal components (67.6%). Cluster Analysis, reduced the fourteen monitoring sites to six

  5. COST-EFFECTIVE CONTROL OF NOx WITH INTEGRATED ULTRA LOW-NOx BURNERS AND SNCR

    International Nuclear Information System (INIS)

    Hamid Farzan

    2001-01-01

    Coal-fired electric utilities are facing a serious challenge with regards to curbing their NO(sub x) emissions. At issue are the NO(sub x) contributions to the acid rain, ground level ozone, and particulate matter formation. Substantial NO(sub x) control requirements could be imposed under the proposed Ozone Transport Rule, National Ambient Air Quality Standards, and New Source Performance Standards. McDermott Technology, Inc. (MTI), Babcock and Wilcox (B and W), and Fuel Tech are teaming to provide an integrated solution for NO(sub x) control. The system will be comprised of an ultra low-NO(sub x) pulverized coal (PC) burner technology plus a urea-based, selective non-catalytic reduction (SNCR) system. This system will be capable of meeting a target emission limit of 0.15 lb NO(sub x)/10(sup 6) Btu and target ammonia (NH3) slip level targeted below 5 ppmV for commercial units. Our approach combines the best available combustion and post-combustion NO(sub x) control technologies. More specifically, B and W's DRB-4Z TM ultra low-NO(sub x) PC burner technology will be combined with Fuel Tech's NO(sub x)OUT (SNCR) and NO(sub x)OUT Cascade (SNCR/SCR hybrid) systems and jointly evaluated and optimized in a state-of-the-art test facility at MTI. Although the NO(sub x)OUT Cascade (SNCR/SCR hybrid) system will not be tested directly in this program, its potential application for situations that require greater NO(sub x) reductions will be inferred from other measurements (i.e., SNCR NO(sub x) removal efficiency plus projected NO(sub x) reduction by the catalyst based on controlled ammonia slip). Our analysis shows that the integrated ultra low-NO(sub x) burner and SNCR system has the lowest cost when the burner emissions are 0.25 lb NO(sub x)/10(sup 6) Btu or less. At burner NO(sub x) emission level of 0.20 lb NO(sub x)/10(sup 6) Btu, the levelized cost per ton of NO(sub x) removed is 52% lower than the SCR cost

  6. A Cost Effective Security Technology Integrated with RFID Based Automated Toll Collection System

    Directory of Open Access Journals (Sweden)

    Rafiya Hossain

    2017-09-01

    Full Text Available Crime statistics and research on criminology show that under similar circumstances,crimes are more likely to occur in developing countries than in developed countries due to their lack ofsecurity measures. Transport crimes on highways and bridges are one of the most common crimes in the developing nations. Automation of various systems like the toll collection system is being introduced in the developing countries to avoid corruption in the collection of toll, decrease cost and increase operational efficiency. The goal of this research is to find an integrated solution that enhances security along with the advantage of automated toll collection. Inspired by the availability of many security systems, this research presents a system that can block a specific vehicle or a particular type of vehicles at the toll booths based on directives from the law enforcement agencies. The heart of the system is based on RFID (Radio Frequency Identification technology. In this system, by sending a text message the law enforcement agency or the authority that controls the toll booths can prevent the barrier from being liftedeven after deduction of the toll charge if the passing vehicle has a security issue. The designed system should help the effort of reducing transport crimes on highways and bridges of developing countries.

  7. Stress estimation in reservoirs using an integrated inverse method

    Science.gov (United States)

    Mazuyer, Antoine; Cupillard, Paul; Giot, Richard; Conin, Marianne; Leroy, Yves; Thore, Pierre

    2018-05-01

    Estimating the stress in reservoirs and their surroundings prior to the production is a key issue for reservoir management planning. In this study, we propose an integrated inverse method to estimate such initial stress state. The 3D stress state is constructed with the displacement-based finite element method assuming linear isotropic elasticity and small perturbations in the current geometry of the geological structures. The Neumann boundary conditions are defined as piecewise linear functions of depth. The discontinuous functions are determined with the CMA-ES (Covariance Matrix Adaptation Evolution Strategy) optimization algorithm to fit wellbore stress data deduced from leak-off tests and breakouts. The disregard of the geological history and the simplified rheological assumptions mean that only the stress field, statically admissible and matching the wellbore data should be exploited. The spatial domain of validity of this statement is assessed by comparing the stress estimations for a synthetic folded structure of finite amplitude with a history constructed assuming a viscous response.

  8. The geological model calibration - Learnings from integration of reservoir geology and field performance - Example from the upper carboniferous reservoirs of the Southern North Sea

    NARCIS (Netherlands)

    Moscariello, A.; Hoof, T.B. van; Kunakbayeva, G.; Veen, J.H. ten; Belt, F. van den; Twerda, A.; Peters, L.; Davis, P.; Williams, H.

    2013-01-01

    The Geological Model Calibration - Learnings from Integration of Reservoir Geology and Field Performance: example from the Upper Carboniferous Reservoirs of the Southern North Sea. Copyright © (2012) by the European Association of Geoscientists & Engineers All rights reserved.

  9. Integrated reservoir characterization: Improvement in heterogeneities stochastic modelling by integration of additional external constraints

    Energy Technology Data Exchange (ETDEWEB)

    Doligez, B.; Eschard, R. [Institut Francais du Petrole, Rueil Malmaison (France); Geffroy, F. [Centre de Geostatistique, Fontainebleau (France)] [and others

    1997-08-01

    The classical approach to construct reservoir models is to start with a fine scale geological model which is informed with petrophysical properties. Then scaling-up techniques allow to obtain a reservoir model which is compatible with the fluid flow simulators. Geostatistical modelling techniques are widely used to build the geological models before scaling-up. These methods provide equiprobable images of the area under investigation, which honor the well data, and which variability is the same than the variability computed from the data. At an appraisal phase, when few data are available, or when the wells are insufficient to describe all the heterogeneities and the behavior of the field, additional constraints are needed to obtain a more realistic geological model. For example, seismic data or stratigraphic models can provide average reservoir information with an excellent areal coverage, but with a poor vertical resolution. New advances in modelisation techniques allow now to integrate this type of additional external information in order to constrain the simulations. In particular, 2D or 3D seismic derived information grids, or sand-shale ratios maps coming from stratigraphic models can be used as external drifts to compute the geological image of the reservoir at the fine scale. Examples are presented to illustrate the use of these new tools, their impact on the final reservoir model, and their sensitivity to some key parameters.

  10. Integrated, multidisciplinary care for hand eczema: design of a randomized controlled trial and cost-effectiveness study

    Directory of Open Access Journals (Sweden)

    Boot Cécile RL

    2009-12-01

    Full Text Available Abstract Background The individual and societal burden of hand eczema is high. Literature indicates that moderate to severe hand eczema is a disease with a poor prognosis. Many patients are hampered in their daily activities, including work. High costs are related to high medical consumption, productivity loss and sick leave. Usual care is suboptimal, due to a lack of optimal instruction and coordination of care, and communication with the general practitioner/occupational physician and people involved at the workplace. Therefore, an integrated, multidisciplinary intervention involving a dermatologist, a care manager, a specialized nurse and a clinical occupational physician was developed. This paper describes the design of a study to investigate the effectiveness and cost-effectiveness of integrated care for hand eczema by a multidisciplinary team, coordinated by a care manager, consisting of instruction on avoiding relevant contact factors, both in the occupational and in the private environment, optimal skin care and treatment, compared to usual, dermatologist-led care. Methods The study is a multicentre, randomized, controlled trial with an economic evaluation alongside. The study population consists of patients with chronic, moderate to severe hand eczema, who visit an outpatient clinic of one of the participating 5 (three university and two general hospitals. Integrated, multidisciplinary care, coordinated by a care manager, including allergo-dermatological evaluation by a dermatologist, occupational intervention by a clinical occupational physician, and counselling by a specialized nurse on optimizing topical treatment and skin care will be compared with usual care by a dermatologist. The primary outcome measure is the cumulative difference in reduction of the clinical severity score HECSI between the groups. Secondary outcome measures are the patient's global assessment, specific quality of life with regard to the hands, generic quality

  11. Integrated HIV testing, malaria, and diarrhea prevention campaign in Kenya: modeled health impact and cost-effectiveness.

    Science.gov (United States)

    Kahn, James G; Muraguri, Nicholas; Harris, Brian; Lugada, Eric; Clasen, Thomas; Grabowsky, Mark; Mermin, Jonathan; Shariff, Shahnaaz

    2012-01-01

    Efficiently delivered interventions to reduce HIV, malaria, and diarrhea are essential to accelerating global health efforts. A 2008 community integrated prevention campaign in Western Province, Kenya, reached 47,000 individuals over 7 days, providing HIV testing and counseling, water filters, insecticide-treated bed nets, condoms, and for HIV-infected individuals cotrimoxazole prophylaxis and referral for ongoing care. We modeled the potential cost-effectiveness of a scaled-up integrated prevention campaign. We estimated averted deaths and disability-adjusted life years (DALYs) based on published data on baseline mortality and morbidity and on the protective effect of interventions, including antiretroviral therapy. We incorporate a previously estimated scaled-up campaign cost. We used published costs of medical care to estimate savings from averted illness (for all three diseases) and the added costs of initiating treatment earlier in the course of HIV disease. Per 1000 participants, projected reductions in cases of diarrhea, malaria, and HIV infection avert an estimated 16.3 deaths, 359 DALYs and $85,113 in medical care costs. Earlier care for HIV-infected persons adds an estimated 82 DALYs averted (to a total of 442), at a cost of $37,097 (reducing total averted costs to $48,015). Accounting for the estimated campaign cost of $32,000, the campaign saves an estimated $16,015 per 1000 participants. In multivariate sensitivity analyses, 83% of simulations result in net savings, and 93% in a cost per DALY averted of less than $20. A mass, rapidly implemented campaign for HIV testing, safe water, and malaria control appears economically attractive.

  12. Integrated HIV testing, malaria, and diarrhea prevention campaign in Kenya: modeled health impact and cost-effectiveness.

    Directory of Open Access Journals (Sweden)

    James G Kahn

    Full Text Available Efficiently delivered interventions to reduce HIV, malaria, and diarrhea are essential to accelerating global health efforts. A 2008 community integrated prevention campaign in Western Province, Kenya, reached 47,000 individuals over 7 days, providing HIV testing and counseling, water filters, insecticide-treated bed nets, condoms, and for HIV-infected individuals cotrimoxazole prophylaxis and referral for ongoing care. We modeled the potential cost-effectiveness of a scaled-up integrated prevention campaign.We estimated averted deaths and disability-adjusted life years (DALYs based on published data on baseline mortality and morbidity and on the protective effect of interventions, including antiretroviral therapy. We incorporate a previously estimated scaled-up campaign cost. We used published costs of medical care to estimate savings from averted illness (for all three diseases and the added costs of initiating treatment earlier in the course of HIV disease.Per 1000 participants, projected reductions in cases of diarrhea, malaria, and HIV infection avert an estimated 16.3 deaths, 359 DALYs and $85,113 in medical care costs. Earlier care for HIV-infected persons adds an estimated 82 DALYs averted (to a total of 442, at a cost of $37,097 (reducing total averted costs to $48,015. Accounting for the estimated campaign cost of $32,000, the campaign saves an estimated $16,015 per 1000 participants. In multivariate sensitivity analyses, 83% of simulations result in net savings, and 93% in a cost per DALY averted of less than $20.A mass, rapidly implemented campaign for HIV testing, safe water, and malaria control appears economically attractive.

  13. Effectiveness and cost-effectiveness of an integrated care program for schizophrenia: an analysis of routine data.

    Science.gov (United States)

    Kerkemeyer, Linda; Wasem, Jürgen; Neumann, Anja; Brannath, Werner; Mester, Benjamin; Timm, Jürgen; Wobrock, Thomas; Bartels, Claudia; Falkai, Peter; Biermann, Janine

    2017-08-08

    In Germany, a regional social health insurance fund provides an integrated care program for patients with schizophrenia (IVS). Based on routine data of the social health insurance, this evaluation examined the effectiveness and cost-effectiveness of the IVS compared to the standard care (control group, CG). The primary outcome was the reduction of psychiatric inpatient treatment (days in hospital), and secondary outcomes were schizophrenia-related inpatient treatment, readmission rates, and costs. To reduce selection bias, a propensity score matching was performed. The matched sample included 752 patients. Mean number of psychiatric and schizophrenia-related hospital days of patients receiving IVS (2.3 ± 6.5, 1.7 ± 5.0) per quarter was reduced, but did not differ statistically significantly from CG (2.7 ± 7.6, 1.9 ± 6.2; p = 0.772, p = 0.352). Statistically significant between-group differences were found in costs per quarter per person caused by outpatient treatment by office-based psychiatrists (IVS: €74.18 ± 42.30, CG: €53.20 ± 47.96; p analysis showed cost savings of €148.59 per reduced psychiatric and €305.40 per reduced schizophrenia-related hospital day. However, limitations, especially non-inclusion of costs related to management of the IVS and additional home treatment within the IVS, restrict the interpretation of the results. Therefore, the long-term impact of this IVS deserves further evaluation.

  14. Comparison of community-wide, integrated mass drug administration strategies for schistosomiasis and soil-transmitted helminthiasis: a cost-effectiveness modelling study.

    Science.gov (United States)

    Lo, Nathan C; Bogoch, Isaac I; Blackburn, Brian G; Raso, Giovanna; N'Goran, Eliézer K; Coulibaly, Jean T; Becker, Sören L; Abrams, Howard B; Utzinger, Jürg; Andrews, Jason R

    2015-10-01

    More than 1·5 billion people are affected by schistosomiasis or soil-transmitted helminthiasis. WHO's recommendations for mass drug administration (MDA) against these parasitic infections emphasise treatment of school-aged children, using separate treatment guidelines for these two helminthiases groups. We aimed to evaluate the cost-effectiveness of expanding integrated MDA to the entire community in four settings in Côte d'Ivoire. We extended previously published, dynamic, age-structured models of helminthiases transmission to simulate costs and disability averted with integrated MDA (of praziquantel and albendazole) for schistosomiasis and soil-transmitted helminthiasis. We calibrated the model to data for prevalence and intensity of species-specific helminth infection from surveys undertaken in four communities in Côte d'Ivoire between March, 1997, and September, 2010. We simulated a 15-year treatment programme with 75% coverage in only school-aged children; school-aged children and preschool-aged children; adults; and the entire community. Treatment costs were estimated at US$0·74 for school-aged children and $1·74 for preschool-aged children and adults. The incremental cost-effectiveness ratio (ICER) was calculated in 2014 US dollars per disability-adjusted life-year (DALY) averted. Expanded community-wide treatment was highly cost effective compared with treatment of only school-aged children (ICER $167 per DALY averted) and WHO guidelines (ICER $127 per DALY averted), and remained highly cost effective even if treatment costs for preschool-aged children and adults were ten times greater than those for school-aged children. Community-wide treatment remained highly cost effective even when elimination of helminth infections was not achieved. These findings were robust across the four diverse communities in Côte d'Ivoire, only one of which would have received annual MDA for both schistosomiasis and soil-transmitted helminthiasis under the latest WHO

  15. MAPPING OF RESERVOIR PROPERTIES AND FACIES THROUGH INTEGRATION OF STATIC AND DYNAMIC DATA

    Energy Technology Data Exchange (ETDEWEB)

    Albert C. Reynolds; Dean S. Oliver; Fengjun Zhang; Yannong Dong; Jan Arild Skjervheim; Ning Liu

    2003-01-01

    Knowledge of the distribution of permeability and porosity in a reservoir is necessary for the prediction of future oil production, estimation of the location of bypassed oil, and optimization of reservoir management. But while the volume of data that can potentially provide information on reservoir architecture and fluid distributions has increased enormously in the past decade, it is not yet possible to make use of all the available data in an integrated fashion. While it is relatively easy to generate plausible reservoir models that honor static data such as core, log, and seismic data, it is far more difficult to generate plausible reservoir models that honor dynamic data such as transient pressures, saturations, and flow rates. As a result, the uncertainty in reservoir properties is higher than it could be and reservoir management can not be optimized. The goal of this project is to develop computationally efficient automatic history matching techniques for generating geologically plausible reservoir models which honor both static and dynamic data. Solution of this problem is necessary for the quantification of uncertainty in future reservoir performance predictions and for the optimization of reservoir management. Facies (defined here as regions of relatively uniform petrophysical properties) are common features of all reservoirs. Because the flow properties of the various facies can vary greatly, knowledge of the location of facies boundaries is of utmost importance for the prediction of reservoir performance and for the optimization of reservoir management. When the boundaries between facies are fairly well known, but flow properties are poorly known, the average properties for all facies can be determined using traditional techniques. Traditional history matching honors dynamic data by adjusting petrophysical properties in large areas, but in the process of adjusting the reservoir model ignores the static data and often results in implausible reservoir

  16. Upscaling of permeability heterogeneities in reservoir rocks; an integrated approach

    NARCIS (Netherlands)

    Mikes, D.

    2002-01-01

    This thesis presents a hierarchical and geologically constrained deterministic approach to incorporate small-scale heterogeneities into reservoir flow simulators. We use a hierarchical structure to encompass all scales from laminae to an entire depositional system. For the geological models under

  17. Advances in coalbed methane reservoirs using integrated reservoir characterization and hydraulic fracturing in Karaganda coal basin, Kazakhstan

    Science.gov (United States)

    Ivakhnenko, Aleksandr; Aimukhan, Adina; Kenshimova, Aida; Mullagaliyev, Fandus; Akbarov, Erlan; Mullagaliyeva, Lylia; Kabirova, Svetlana; Almukhametov, Azamat

    2017-04-01

    Coalbed methane from Karaganda coal basin is considered to be an unconventional source of energy for the Central and Eastern parts of Kazakhstan. These regions are situated far away from the main traditional sources of oil and gas related to Precaspian petroleum basin. Coalbed methane fields in Karaganda coal basin are characterized by geological and structural complexity. Majority of production zones were characterized by high methane content and extremely low coal permeability. The coal reservoirs also contained a considerable natural system of primary, secondary, and tertiary fractures that were usually capable to accommodate passing fluid during hydraulic fracturing process. However, after closing was often observed coal formation damage including the loss of fluids, migration of fines and higher pressures required to treat formation than were expected. Unusual or less expected reservoir characteristics and values of properties of the coal reservoir might be the cause of the unusual occurred patterns in obtained fracturing, such as lithological peculiarities, rock mechanical properties and previous natural fracture systems in the coals. Based on these properties we found that during the drilling and fracturing of the coal-induced fractures have great sensitivity to complex reservoir lithology and stress profiles, as well as changes of those stresses. In order to have a successful program of hydraulic fracturing and avoid unnecessary fracturing anomalies we applied integrated reservoir characterization to monitor key parameters. In addition to logging data, core sample analysis was applied for coalbed methane reservoirs to observe dependence tiny lithological variations through the magnetic susceptibility values and their relation to permeability together with expected principal stress. The values of magnetic susceptibility were measured by the core logging sensor, which is equipped with the probe that provides volume magnetic susceptibility parameters

  18. Analog Integrated Circuit Design for Spike Time Dependent Encoder and Reservoir in Reservoir Computing Processors

    Science.gov (United States)

    2018-01-01

    HAS BEEN REVIEWED AND IS APPROVED FOR PUBLICATION IN ACCORDANCE WITH ASSIGNED DISTRIBUTION STATEMENT. FOR THE CHIEF ENGINEER : / S / / S...bridged high-performance computing, nanotechnology , and integrated circuits & systems. 15. SUBJECT TERMS neuromorphic computing, neuron design, spike...multidisciplinary effort encompassed high-performance computing, nanotechnology , integrated circuits, and integrated systems. The project’s architecture was

  19. Integrating gravimetric and interferometric synthetic aperture radar data for enhancing reservoir history matching of carbonate gas and volatile oil reservoirs

    KAUST Repository

    Katterbauer, Klemens; Arango, Santiago; Sun, Shuyu; Hoteit, Ibrahim

    2016-01-01

    Reservoir history matching is assuming a critical role in understanding reservoir characteristics, tracking water fronts, and forecasting production. While production data have been incorporated for matching reservoir production levels

  20. MAPPING OF RESERVOIR PROPERTIES AND FACIES THROUGH INTEGRATION OF STATIC AND DYNAMIC DATA

    Energy Technology Data Exchange (ETDEWEB)

    Albert C. Reynolds; Dean S. Oliver; Yannong Dong; Ning Liu; Guohua Gao; Fengjun Zhang; Ruijian Li

    2004-12-01

    Knowledge of the distribution of permeability and porosity in a reservoir is necessary for the prediction of future oil production, estimation of the location of bypassed oil, and optimization of reservoir management. The volume of data that can potentially provide information on reservoir architecture and fluid distributions has increased enormously in the past decade. The techniques developed in this research will make it easier to use all the available data in an integrated fashion. While it is relatively easy to generate plausible reservoir models that honor static data such as core, log, and seismic data, it is far more difficult to generate plausible reservoir models that honor dynamic data such as transient pressures, saturations, and flow rates. As a result, the uncertainty in reservoir properties is higher than it could be and reservoir management can not be optimized. In this project, we have developed computationally efficient automatic history matching techniques for generating geologically plausible reservoir models which honor both static and dynamic data. Specifically, we have developed methods for adjusting porosity and permeability fields to match both production and time-lapse seismic data and have also developed a procedure to adjust the locations of boundaries between facies to match production data. In all cases, the history matched rock property fields are consistent with a prior model based on static data and geologic information. Our work also indicates that it is possible to adjust relative permeability curves when history matching production data.

  1. Integration of Seismic and Petrophysics to Characterize Reservoirs in “ALA” Oil Field, Niger Delta

    Directory of Open Access Journals (Sweden)

    P. A. Alao

    2013-01-01

    Full Text Available In the exploration and production business, by far the largest component of geophysical spending is driven by the need to characterize (potential reservoirs. The simple reason is that better reservoir characterization means higher success rates and fewer wells for reservoir exploitation. In this research work, seismic and well log data were integrated in characterizing the reservoirs on “ALA” field in Niger Delta. Three-dimensional seismic data was used to identify the faults and map the horizons. Petrophysical parameters and time-depth structure maps were obtained. Seismic attributes was also employed in characterizing the reservoirs. Seven hydrocarbon-bearing reservoirs with thickness ranging from 9.9 to 71.6 m were delineated. Structural maps of horizons in six wells containing hydrocarbon-bearing zones with tops and bottoms at range of −2,453 to −3,950 m were generated; this portrayed the trapping mechanism to be mainly fault-assisted anticlinal closures. The identified prospective zones have good porosity, permeability, and hydrocarbon saturation. The environments of deposition were identified from log shapes which indicate a transitional-to-deltaic depositional environment. In this research work, new prospects have been recommended for drilling and further research work. Geochemical and biostratigraphic studies should be done to better characterize the reservoirs and reliably interpret the depositional environments.

  2. Integration of seismic and petrophysics to characterize reservoirs in "ALA" oil field, Niger Delta.

    Science.gov (United States)

    Alao, P A; Olabode, S O; Opeloye, S A

    2013-01-01

    In the exploration and production business, by far the largest component of geophysical spending is driven by the need to characterize (potential) reservoirs. The simple reason is that better reservoir characterization means higher success rates and fewer wells for reservoir exploitation. In this research work, seismic and well log data were integrated in characterizing the reservoirs on "ALA" field in Niger Delta. Three-dimensional seismic data was used to identify the faults and map the horizons. Petrophysical parameters and time-depth structure maps were obtained. Seismic attributes was also employed in characterizing the reservoirs. Seven hydrocarbon-bearing reservoirs with thickness ranging from 9.9 to 71.6 m were delineated. Structural maps of horizons in six wells containing hydrocarbon-bearing zones with tops and bottoms at range of -2,453 to -3,950 m were generated; this portrayed the trapping mechanism to be mainly fault-assisted anticlinal closures. The identified prospective zones have good porosity, permeability, and hydrocarbon saturation. The environments of deposition were identified from log shapes which indicate a transitional-to-deltaic depositional environment. In this research work, new prospects have been recommended for drilling and further research work. Geochemical and biostratigraphic studies should be done to better characterize the reservoirs and reliably interpret the depositional environments.

  3. Low-Loss Photonic Reservoir Computing with Multimode Photonic Integrated Circuits.

    Science.gov (United States)

    Katumba, Andrew; Heyvaert, Jelle; Schneider, Bendix; Uvin, Sarah; Dambre, Joni; Bienstman, Peter

    2018-02-08

    We present a numerical study of a passive integrated photonics reservoir computing platform based on multimodal Y-junctions. We propose a novel design of this junction where the level of adiabaticity is carefully tailored to capture the radiation loss in higher-order modes, while at the same time providing additional mode mixing that increases the richness of the reservoir dynamics. With this design, we report an overall average combination efficiency of 61% compared to the standard 50% for the single-mode case. We demonstrate that with this design, much more power is able to reach the distant nodes of the reservoir, leading to increased scaling prospects. We use the example of a header recognition task to confirm that such a reservoir can be used for bit-level processing tasks. The design itself is CMOS-compatible and can be fabricated through the known standard fabrication procedures.

  4. HIV integration sites and implications for maintenance of the reservoir.

    Science.gov (United States)

    Symons, Jori; Cameron, Paul U; Lewin, Sharon R

    2018-03-01

    To provide an overview of recent research of how HIV integration relates to productive and latent infection and implications for cure strategies. How and where HIV integrates provides new insights into how HIV persists on antiretroviral therapy (ART). Clonal expansion of infected cells with the same integration site demonstrates that T-cell proliferation is an important factor in HIV persistence, however, the driver of proliferation remains unclear. Clones with identical integration sites harbouring defective provirus can accumulate in HIV-infected individuals on ART and defective proviruses can express RNA and produce protein. HIV integration sites differ in clonally expanded and nonexpanded cells and in latently and productively infected cells and this influences basal and inducible transcription. There is a growing number of cellular proteins that can alter the pattern of integration to favour latency. Understanding these pathways may identify new interventions to eliminate latently infected cells. Using advances in analysing HIV integration sites, T-cell proliferation of latently infected cells is thought to play a major role in HIV persistence. Clonal expansion has been demonstrated with both defective and intact viruses. Production of viral RNA and protein from defective viruses may play a role in driving chronic immune activation. The site of integration may determine the likelihood of proliferation and the degree of basal and induced transcription. Finally, host factors and gene expression at the time of infection may determine the integration site. Together these new insights may lead to novel approaches to elimination of latently infected cells.

  5. Absorption of SO2 and NO through an integrative process with a cost-effective aqueous oxidant

    Directory of Open Access Journals (Sweden)

    Chelluboyana Vaishnava Raghunath

    2016-09-01

    Full Text Available Due to the substantial influence on the environment and health, there has been an intensifying environmental concern on sulfur dioxide (SO2 and nitrogen oxide (NO discharge to the atmosphere all over the world. Flue gas of coal-fired power stations is major leading source for the emission of SO2 and NO. Cost-effective and balanced technologies for the reduction of these pollutants from flue gas have become increasingly essential at the present time. The preliminary experimental attributes were retrieved in a batch scale agitating bubbling reactor for instantaneous absorption of SO2 and NO using aqueous oxidant. The prime conditions for instantaneous absorption examined were including absorbent concentration, reaction temperature, and pH in the fabricated flue gas system. Removal efficiencies of 99% for SO2 and 85% for NO were acquired, respectively under absorbent concentration 5 g/100 ml, reaction temperature 313 K, and pH 5.6.

  6. The next generation of urban MACCs. Reassessing the cost-effectiveness of urban mitigation options by integrating a systemic approach and social costs

    International Nuclear Information System (INIS)

    Saujot, Mathieu; Lefèvre, Benoit

    2016-01-01

    Many cities are implementing policies and climate action plans. Yet local climate policies suffer from a lack of scientific understanding and evaluation methods able to support the definition of efficient mitigation strategies. The purpose of this paper is to build on classical approaches in the energy policy field that exist at the national and international level to propose an urban MACCs methodology able to fulfill this lack and inform local debates. The methodology is an extension of static “expert-based” MACCs; it combines a land use transport integrated model and an abatement cost methodology that integrates co-benefits, and takes into account the spatial and systemic dimensions of cities. The methodology is implemented for the transportation sector of a mid-sized European city (Grenoble, France). Our results present the cost-effectiveness and political feasibility of several proposed measures. We find that the inclusion of co-benefits can profoundly change the cost-benefit assessment of transport mitigation options. Moreover we underline the key parameters determining the cost-effectiveness ranking of mitigation options. These urban MACCs aim to serve as a bridge between urban planning and mitigation policies and can thus contribute to strengthen and align sustainable and climate change agendas at the local level. - Highlights: •Local climate policies lack scientific understanding for prioritizing mitigation actions. •We develop a method to evaluate cost-effectiveness of urban transportation actions. •This method combines urban modeling and MACCs to inform urban planning. •Abatement costs from its application to a mid-sized city are presented. •The impact of the inclusion of co-benefits is analyzed.

  7. Performance modeling of an integral, self-regulating cesium reservoir for the ATI-TFE

    International Nuclear Information System (INIS)

    Thayer, K.L.; Ramalingam, M.L.; Young, T.J.

    1993-01-01

    This work covers the performance modeling of an integral metal-matrix cesium-graphite reservoir for operation in the Advanced Thermionic Initiative-Thermionic Fuel Element (ATI-TFE) converter configuration. The objectives of this task were to incorporate an intercalated cesium-graphite reservoir for the 3C 24 Cs→2C 36 Cs+Cs (g) two phase equilibrium reaction into the emitter lead region of the ATI-TFE. A semi two-dimensional, cylindrical TFE computer model was used to obtain thermal and electrical converter output characteristics for various reservoir locations. The results of this study are distributions for the interelectrode voltage, output current density, and output power density as a function of axial position along the TFE emitter. This analysis was accomplished by identifying an optimum cesium pressure for three representative pins in the ATI ''driverless'' reactor core and determining the corresponding position of the graphite reservoir in the ATI-TFE lead region. The position for placement of the graphite reservoir was determined by performing a first-order heat transfer analysis of the TFE lead region to determine its temperature distribution. The results of this analysis indicate that for the graphite reservoirs investigated the 3C 24 Cs→2C 36 Cs+Cs (g) equilibrium reaction reservoir is ideal for placement in the TFE emitter lead region. This reservoir can be directly coupled to the emitter, through conduction, to provide the desired cesium pressure for optimum performance. The cesium pressure corresponding to the optimum converter output performance was found to be 2.18 torr for the ATI core least power TFE, 2.92 torr for the average power TFE, and 4.93 torr for the maximum power TFE

  8. Informing mental health policies and services in the EMR: cost-effective deployment of human resources to deliver integrated community-based care.

    Science.gov (United States)

    Ivbijaro, G; Patel, V; Chisholm, D; Goldberg, D; Khoja, T A M; Edwards, T M; Enum, Y; Kolkiewic, L A

    2015-09-28

    For EMR countries to deliver the expectations of the Global Mental Health Action Plan 2013-2020 & the ongoing move towards universal health coverage, all health & social care providers need to innovate and transform their services to provide evidence-based health care that is accessible, cost-effective & with the best patient outcomes. For the primary and community workforce, this includes general medical practitioners, practice & community nurses, community social workers, housing officers, lay health workers, nongovernmental organizations & civil society, including community spiritual leaders/healers. This paper brings together the current best evidence to support transformation & discusses key approaches to achieve this, including skill mix and/or task shifting and integrated care. The important factors that need to be in place to support skill mix/task shifting and good integrated care are outlined with reference to EMR countries.

  9. A Methodology to Integrate Magnetic Resonance and Acoustic Measurements for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Parra, Jorge O.; Hackert, Chris L.; Collier, Hughbert A.; Bennett, Michael

    2002-01-29

    The objective of this project was to develop an advanced imaging method, including pore scale imaging, to integrate NMR techniques and acoustic measurements to improve predictability of the pay zone in hydrocarbon reservoirs. This is accomplished by extracting the fluid property parameters using NMR laboratory measurements and the elastic parameters of the rock matrix from acoustic measurements to create poroelastic models of different parts of the reservoir. Laboratory measurement techniques and core imaging are being linked with a balanced petrographical analysis of the core and theoretical model.

  10. Cost-Effectiveness Evaluation of a Novel Integrated Bite Case Management Program for the Control of Human Rabies, Haiti 2014-2015.

    Science.gov (United States)

    Undurraga, Eduardo A; Meltzer, Martin I; Tran, Cuc H; Atkins, Charisma Y; Etheart, Melissa D; Millien, Max F; Adrien, Paul; Wallace, Ryan M

    2017-06-01

    AbstractHaiti has the highest burden of rabies in the Western hemisphere, with 130 estimated annual deaths. We present the cost-effectiveness evaluation of an integrated bite case management program combining community bite investigations and passive animal rabies surveillance, using a governmental perspective. The Haiti Animal Rabies Surveillance Program (HARSP) was first implemented in three communes of the West Department, Haiti. Our evaluation encompassed all individuals exposed to rabies in the study area ( N = 2,289) in 2014-2015. Costs (2014 U.S. dollars) included diagnostic laboratory development, training of surveillance officers, operational costs, and postexposure prophylaxis (PEP). We used estimated deaths averted and years of life gained (YLG) from prevented rabies as health outcomes. HARSP had higher overall costs (range: $39,568-$80,290) than the no-bite-case-management (NBCM) scenario ($15,988-$26,976), partly from an increased number of bite victims receiving PEP. But HARSP had better health outcomes than NBCM, with estimated 11 additional annual averted deaths in 2014 and nine in 2015, and 654 additional YLG in 2014 and 535 in 2015. Overall, HARSP was more cost-effective (US$ per death averted) than NBCM (2014, HARSP: $2,891-$4,735, NBCM: $5,980-$8,453; 2015, HARSP: $3,534-$7,171, NBCM: $7,298-$12,284). HARSP offers an effective human rabies prevention solution for countries transitioning from reactive to preventive strategies, such as comprehensive dog vaccination.

  11. Modeling and Analysis of Integrated Bathymetric and Geodetic Data for Inventory Surveys of Mining Water Reservoirs

    Directory of Open Access Journals (Sweden)

    Ochałek Agnieszka

    2018-01-01

    Full Text Available The significant part of the hydrography is bathymetry, which is the empirical part of it. Bathymetry is the study of underwater depth of waterways and reservoirs, and graphic presentation of measured data in form of bathymetric maps, cross-sections and three-dimensional bottom models. The bathymetric measurements are based on using Global Positioning System and devices for hydrographic measurements – an echo sounder and a side sonar scanner. In this research authors focused on introducing the case of obtaining and processing the bathymetrical data, building numerical bottom models of two post-mining reclaimed water reservoirs: Dwudniaki Lake in Wierzchosławice and flooded quarry in Zabierzów. The report includes also analysing data from still operating mining water reservoirs located in Poland to depict how bathymetry can be used in mining industry. The significant issue is an integration of bathymetrical data and geodetic data from tachymetry, terrestrial laser scanning measurements.

  12. Modeling and Analysis of Integrated Bathymetric and Geodetic Data for Inventory Surveys of Mining Water Reservoirs

    Science.gov (United States)

    Ochałek, Agnieszka; Lipecki, Tomasz; Jaśkowski, Wojciech; Jabłoński, Mateusz

    2018-03-01

    The significant part of the hydrography is bathymetry, which is the empirical part of it. Bathymetry is the study of underwater depth of waterways and reservoirs, and graphic presentation of measured data in form of bathymetric maps, cross-sections and three-dimensional bottom models. The bathymetric measurements are based on using Global Positioning System and devices for hydrographic measurements - an echo sounder and a side sonar scanner. In this research authors focused on introducing the case of obtaining and processing the bathymetrical data, building numerical bottom models of two post-mining reclaimed water reservoirs: Dwudniaki Lake in Wierzchosławice and flooded quarry in Zabierzów. The report includes also analysing data from still operating mining water reservoirs located in Poland to depict how bathymetry can be used in mining industry. The significant issue is an integration of bathymetrical data and geodetic data from tachymetry, terrestrial laser scanning measurements.

  13. Application of Reservoir Flow Simulation Integrated with Geomechanics in Unconventional Tight Play

    Science.gov (United States)

    Lin, Menglu; Chen, Shengnan; Mbia, Ernest; Chen, Zhangxing

    2018-01-01

    Multistage hydraulic fracturing techniques, combined with horizontal drilling, have enabled commercial production from the vast reserves of unconventional tight formations. During hydraulic fracturing, fracturing fluid and proppants are pumped into the reservoir matrix to create the hydraulic fractures. Understanding the propagation mechanism of hydraulic fractures is essential to estimate their properties, such as half-length. In addition, natural fractures are often present in tight formations, which might be activated during the fracturing process and contribute to the post-stimulation well production rates. In this study, reservoir simulation is integrated with rock geomechanics to predict the well post-stimulation productivities. Firstly, a reservoir geological model is built based on the field data collected from the Montney formation in the Western Canadian Sedimentary Basin. The hydraulic fracturing process is then simulated through an integrated approach of fracturing fluid injection, rock geomechanics, and tensile failure criteria. In such a process, the reservoir pore pressure increases with a continuous injection of the fracturing fluid and proppants, decreasing the effective stress exerted on the rock matrix accordingly as the overburden pressure remains constant. Once the effective stress drops to a threshold value, tensile failure of the reservoir rock occurs, creating hydraulic fractures in the formation. The early production history of the stimulated well is history-matched to validate the predicted fracture geometries (e.g., half-length) generated from the fracturing simulation process. The effects of the natural fracture properties and well bottom-hole pressures on well productivity are also studied. It has been found that nearly 40% of hydraulic fractures propagate in the beginning stage (the pad step) of the fracturing schedule. In addition, well post-stimulation productivity will increase significantly if the natural fractures are propped or

  14. Towards an optimal integrated reservoir system management for the Awash River Basin, Ethiopia

    Directory of Open Access Journals (Sweden)

    R. Müller

    2016-05-01

    Full Text Available Recently, the Kessem–Tendaho project is completed to bring about socioeconomic development and growth in the Awash River Basin, Ethiopia. To support reservoir Koka, two new reservoirs where built together with extensive infrastructure for new irrigation projects. For best possible socioeconomic benefits under conflicting management goals, like energy production at three hydropower stations and basin wide water supply at various sites, an integrated reservoir system management is required. To satisfy the multi-purpose nature of the reservoir system, multi-objective parameterization-simulation-optimization model is applied. Different Pareto-optimal trade-off solutions between water supply and hydro-power generation are provided for two scenarios (i recent conditions and (ii future planned increases for Tendaho and Upper Awash Irrigation projects. Reservoir performance is further assessed under (i rule curves with a high degree of freedom – this allows for best performance, but may result in rules curves to variable for real word operation and (ii smooth rule curves, obtained by artificial neuronal networks. The results show no performance penalty for smooth rule curves under future conditions but a notable penalty under recent conditions.

  15. Optimal Reoperation of Multi-Reservoirs for Integrated Watershed Management with Multiple Benefits

    Directory of Open Access Journals (Sweden)

    Xinyi Xu

    2014-04-01

    Full Text Available Constructing reservoirs can make more efficient use of water resources for human society. However, the negative impacts of these projects on the environment are often ignored. Optimal reoperation of reservoirs, which considers not only in socio-economic values but also environmental benefits, is increasingly important. A model of optimal reoperation of multi-reservoirs for integrated watershed management with multiple benefits was proposed to alleviate the conflict between water use and environmental deterioration. The social, economic, water quality and ecological benefits were respectively taken into account as the scheduling objectives and quantified according to economic models. River minimum ecological flows and reservoir water levels based on flood control were taken as key constraint conditions. Feasible search discrete differential dynamic programming (FS-DDDP was used to run the model. The proposed model was used in the upstream of the Nanpan River, to quantitatively evaluate the difference between optimal reoperation and routine operation. The results indicated that the reoperation could significantly increase the water quality benefit and have a minor effect on the benefits of power generation and irrigation under different hydrological years. The model can be readily adapted to other multi-reservoir systems for water resources management.

  16. Towards an optimal integrated reservoir system management for the Awash River Basin, Ethiopia

    Science.gov (United States)

    Müller, Ruben; Gebretsadik, Henok Y.; Schütze, Niels

    2016-05-01

    Recently, the Kessem-Tendaho project is completed to bring about socioeconomic development and growth in the Awash River Basin, Ethiopia. To support reservoir Koka, two new reservoirs where built together with extensive infrastructure for new irrigation projects. For best possible socioeconomic benefits under conflicting management goals, like energy production at three hydropower stations and basin wide water supply at various sites, an integrated reservoir system management is required. To satisfy the multi-purpose nature of the reservoir system, multi-objective parameterization-simulation-optimization model is applied. Different Pareto-optimal trade-off solutions between water supply and hydro-power generation are provided for two scenarios (i) recent conditions and (ii) future planned increases for Tendaho and Upper Awash Irrigation projects. Reservoir performance is further assessed under (i) rule curves with a high degree of freedom - this allows for best performance, but may result in rules curves to variable for real word operation and (ii) smooth rule curves, obtained by artificial neuronal networks. The results show no performance penalty for smooth rule curves under future conditions but a notable penalty under recent conditions.

  17. Towards Cost-Effective Crystalline Silicon Based Flexible Solar Cells: Integration Strategy by Rational Design of Materials, Process, and Devices

    KAUST Repository

    Bahabry, Rabab R.

    2017-11-30

    The solar cells market has an annual growth of more than 30 percent over the past 15 years. At the same time, the cost of the solar modules diminished to meet both of the rapid global demand and the technological improvements. In particular for the crystalline silicon solar cells, the workhorse of this technology. The objective of this doctoral thesis is enhancing the efficiency of c-Si solar cells while exploring the cost reduction via innovative techniques. Contact metallization and ultra-flexible wafer based c-Si solar cells are the main areas under investigation. First, Silicon-based solar cells typically utilize screen printed Silver (Ag) metal contacts which affect the optimal electrical performance. To date, metal silicide-based ohmic contacts are occasionally used for the front contact grid lines. In this work, investigation of the microstructure and the electrical characteristics of nickel monosilicide (NiSi) ohmic contacts on the rear side of c-Si solar cells has been carried out. Significant enhancement in the fill factor leading to increasing the total power conversion efficiency is observed. Second, advanced classes of modern application require a new generation of versatile solar cells showcasing extreme mechanical resilience. However, silicon is a brittle material with a fracture strains <1%. Highly flexible Si-based solar cells are available in the form thin films which seem to be disadvantageous over thick Si solar cells due to the reduction of the optical absorption with less active Si material. Here, a complementary metal oxide semiconductor (CMOS) technology based integration strategy is designed where corrugation architecture to enable an ultra-flexible solar cell module from bulk mono-crystalline silicon solar wafer with 17% efficiency. This periodic corrugated array benefits from an interchangeable solar cell segmentation scheme which preserves the active silicon thickness and achieves flexibility via interdigitated back contacts. These cells

  18. Integrating gravimetric and interferometric synthetic aperture radar data for enhancing reservoir history matching of carbonate gas and volatile oil reservoirs

    KAUST Repository

    Katterbauer, Klemens

    2016-08-25

    Reservoir history matching is assuming a critical role in understanding reservoir characteristics, tracking water fronts, and forecasting production. While production data have been incorporated for matching reservoir production levels and estimating critical reservoir parameters, the sparse spatial nature of this dataset limits the efficiency of the history matching process. Recently, gravimetry techniques have significantly advanced to the point of providing measurement accuracy in the microgal range and consequently can be used for the tracking of gas displacement caused by water influx. While gravity measurements provide information on subsurface density changes, i.e., the composition of the reservoir, these data do only yield marginal information about temporal displacements of oil and inflowing water. We propose to complement gravimetric data with interferometric synthetic aperture radar surface deformation data to exploit the strong pressure deformation relationship for enhancing fluid flow direction forecasts. We have developed an ensemble Kalman-filter-based history matching framework for gas, gas condensate, and volatile oil reservoirs, which synergizes time-lapse gravity and interferometric synthetic aperture radar data for improved reservoir management and reservoir forecasts. Based on a dual state-parameter estimation algorithm separating the estimation of static reservoir parameters from the dynamic reservoir parameters, our numerical experiments demonstrate that history matching gravity measurements allow monitoring the density changes caused by oil-gas phase transition and water influx to determine the saturation levels, whereas the interferometric synthetic aperture radar measurements help to improve the forecasts of hydrocarbon production and water displacement directions. The reservoir estimates resulting from the dual filtering scheme are on average 20%-40% better than those from the joint estimation scheme, but require about a 30% increase in

  19. A micro-grid operation analysis for cost-effective battery energy storage and RES plants integration

    International Nuclear Information System (INIS)

    Barelli, L.; Bidini, G.; Bonucci, F.

    2016-01-01

    Penetration of renewable energy is strongly slowed by its characteristic intermittency and fluctuating trend and by the inadequacy of electricity networks. These issues can be addressed through the development of new or improved storage technologies with higher performance, availability, durability, safety and lower costs. In the present work, micro-grids characterized by the presence of different subsections including renewable plants coupled with batteries storage solution are investigated through the development of a suitable code. Several design conditions and features, related to RES plant, storage system and users, were considered in order to realize a sensitivity analysis aimed to examine, on a yearly base and with one minute time step, interactions among the different micro-grid subsections and to identify the best solutions from both economic and energy point of views. - Highlights: • Storage systems coupling to RES plants is investigated for micro-grids. • Interactions between RES plants, storage batteries and users are analyzed. • Self-consumption increases with storage installation. • Investment pay-back analysis is performed varying plant configurations. • Pay-back reduction up to 30–40% for new RES/Storage integrated installations.

  20. Efficacy and Cost-Effectiveness Analysis of Evidence-Based Nursing Interventions to Maintain Tissue Integrity to Prevent Pressure Ulcers and Incontinence-Associated Dermatitis.

    Science.gov (United States)

    Avşar, Pınar; Karadağ, Ayişe

    2018-02-01

    A reduction in tissue tolerance promotes the development of pressure ulcers (PUs) and incontinence-associated dermatitis (IAD). To determine the cost-effectiveness and efficacy of evidence-based (EB) nursing interventions on increasing tissue tolerance by maintaining tissue integrity. The study involved 154 patients in two intensive care units (77 patients, control group; 77 patients, intervention group). Data were collected using the following: patient characteristics form, Braden PU risk assessment scale, tissue integrity monitoring form, PU identification form, IAD and severity scale, and a cost table of the interventions. Patients in the intervention group were cared for by nurses trained in the use of the data collection tools and in EB practices to improve tissue tolerance. Routine nursing care was given to the patients in the control group. The researcher observed all patients in terms of tissue integrity and recorded the care-related costs. Deterioration of tissue integrity was observed in 18.2% patients in the intervention group compared to 54.5% in the control group (p cost to increase tissue tolerance prevention in the intervention and control groups was X¯ = $204.34 ± 41.07 and X¯ = $138.90 ± 1.70, respectively. It is recommended that EB policies and procedures are developed to improve tissue tolerance by maintaining tissue integrity. Although the cost of EB preventive initiatives is relatively high compared to those that are not EB, the former provide a significant reduction in the prevalence of tissue integrity deterioration. © 2017 Sigma Theta Tau International.

  1. Next-generation phage display: integrating and comparing available molecular tools to enable cost-effective high-throughput analysis.

    Directory of Open Access Journals (Sweden)

    Emmanuel Dias-Neto

    2009-12-01

    Full Text Available Combinatorial phage display has been used in the last 20 years in the identification of protein-ligands and protein-protein interactions, uncovering relevant molecular recognition events. Rate-limiting steps of combinatorial phage display library selection are (i the counting of transducing units and (ii the sequencing of the encoded displayed ligands. Here, we adapted emerging genomic technologies to minimize such challenges.We gained efficiency by applying in tandem real-time PCR for rapid quantification to enable bacteria-free phage display library screening, and added phage DNA next-generation sequencing for large-scale ligand analysis, reporting a fully integrated set of high-throughput quantitative and analytical tools. The approach is far less labor-intensive and allows rigorous quantification; for medical applications, including selections in patients, it also represents an advance for quantitative distribution analysis and ligand identification of hundreds of thousands of targeted particles from patient-derived biopsy or autopsy in a longer timeframe post library administration. Additional advantages over current methods include increased sensitivity, less variability, enhanced linearity, scalability, and accuracy at much lower cost. Sequences obtained by qPhage plus pyrosequencing were similar to a dataset produced from conventional Sanger-sequenced transducing-units (TU, with no biases due to GC content, codon usage, and amino acid or peptide frequency. These tools allow phage display selection and ligand analysis at >1,000-fold faster rate, and reduce costs approximately 250-fold for generating 10(6 ligand sequences.Our analyses demonstrates that whereas this approach correlates with the traditional colony-counting, it is also capable of a much larger sampling, allowing a faster, less expensive, more accurate and consistent analysis of phage enrichment. Overall, qPhage plus pyrosequencing is superior to TU-counting plus Sanger

  2. Integration of 3D photogrammetric outcrop models in the reservoir modelling workflow

    Science.gov (United States)

    Deschamps, Remy; Joseph, Philippe; Lerat, Olivier; Schmitz, Julien; Doligez, Brigitte; Jardin, Anne

    2014-05-01

    3D technologies are now widely used in geosciences to reconstruct outcrops in 3D. The technology used for the 3D reconstruction is usually based on Lidar, which provides very precise models. Such datasets offer the possibility to build well-constrained outcrop analogue models for reservoir study purposes. The photogrammetry is an alternate methodology which principles are based in determining the geometric properties of an object from photographic pictures taken from different angles. Outcrop data acquisition is easy, and this methodology allows constructing 3D outcrop models with many advantages such as: - light and fast acquisition, - moderate processing time (depending on the size of the area of interest), - integration of field data and 3D outcrops into the reservoir modelling tools. Whatever the method, the advantages of digital outcrop model are numerous as already highlighted by Hodgetts (2013), McCaffrey et al. (2005) and Pringle et al. (2006): collection of data from otherwise inaccessible areas, access to different angles of view, increase of the possible measurements, attributes analysis, fast rate of data collection, and of course training and communication. This paper proposes a workflow where 3D geocellular models are built by integrating all sources of information from outcrops (surface picking, sedimentological sections, structural and sedimentary dips…). The 3D geomodels that are reconstructed can be used at the reservoir scale, in order to compare the outcrop information with subsurface models: the detailed facies models of the outcrops are transferred into petrophysical and acoustic models, which are used to test different scenarios of seismic and fluid flow modelling. The detailed 3D models are also used to test new techniques of static reservoir modelling, based either on geostatistical approaches or on deterministic (process-based) simulation techniques. A modelling workflow has been designed to model reservoir geometries and properties from

  3. A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

    KAUST Repository

    Li, Ming

    2011-12-03

    We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO 2 laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc. © Springer-Verlag 2011.

  4. Developing an integrated 3D-hydrodynamic and emerging contaminant model for assessing water quality in a Yangtze Estuary Reservoir.

    Science.gov (United States)

    Xu, Cong; Zhang, Jingjie; Bi, Xiaowei; Xu, Zheng; He, Yiliang; Gin, Karina Yew-Hoong

    2017-12-01

    An integrated 3D-hydrodynamic and emerging contaminant model was developed for better understanding of the fate and transport of emerging contaminants in Qingcaosha Reservoir. The reservoir, which supplies drinking water for nearly half of Shanghai's population, is located in Yangtze Delta. The integrated model was built by Delft3D suite, a fully integrated multidimensional modeling software. Atrazine and Bisphenol A (BPA) were selected as two representative emerging contaminants for the study in this reservoir. The hydrodynamic model was calibrated and validated against observations from 2011 to 2015 while the integrated model was calibrated against observations from 2014 to 2015 and then applied to explore the potential risk of high atrazine concentrations in the reservoir driven by agriculture activities. Our results show that the model is capable of describing the spatial and temporal patterns of water temperature, salinity and the dynamic distributions of two representative emerging contaminants (i.e. atrazine and BPA) in the reservoir. The physical and biodegradation processes in this study were found to play a crucial role in determining the fate and transport of atrazine and BPA in the reservoir. The model also provides an insight into the potential risk of emerging contaminants and possible mitigation thresholds. The integrated approach can be a very useful tool to support policy-makers in the future management of Qingcaosha Reservoir. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. [Cost-effectiveness and cost-benefit analysis on the integrated schistosomiasis control strategies with emphasis on infection source in Poyang Lake region].

    Science.gov (United States)

    Lin, Dan-Dan; Zeng, Xiao-Jun; Chen, Hong-Gen; Hong, Xian-Lin; Tao, Bo; Li, Yi-Feng; Xiong, Ji-Jie; Zhou, Xiao-Nong

    2009-08-01

    To evaluate the cost-effectiveness and cost-benefit on the integrated schistosomiasis control strategies with emphasis on infection source, and provide scientific basis for the improvement of schistosomiasis control strategy. Aiguo and Xinhe villages in Jinxian County were selected as intervention group where the new comprehensive strategy was implemented, while Ximiao and Zuxi villages in Xinzi County served as control where routine control program was implemented. New strategy of interventions included removing cattle from snail-infested grasslands and providing farmers with farm machinery, improving sanitation by supplying tap water and building lavatories and methane gas tanks, and implementing an intensive health education program. Routine interventions were carried out in the control villages including diagnosis and treatment for human and cattle, health education, and focal mollusciciding. Data were collected from retrospective investigation and field survey for the analysis and comparison of cost-effectiveness and cost-benefit between intervention and control groups. The control effect of the intervention group was better than that of the control. The cost for 1% decrease of infection rate per 100 people, 100 cattle, and 100 snails in intervention group was 480.01, 6 851.24, and 683.63 Yuan, respectively, which were about 2.70, 4.37 and 20.25 times as those in the control respectively. The total cost/benefit ratio (BCR) was lower than 1 (0.94 in intervention group and 0.08 in the control). But the total benefit of intervention group was higher than that of the control from 2005 to 2008. The forecasting analysis indicated that the total BCR in intervention group would be 1.13 at the 4th year and all cost could be recalled. Sensitivity analysis revealed that the BCR in intervention group changed in the range around 1.0 and that of the control ranged blow 0.5. The cost-benefit of intervention group was evidently higher than that of the control. The integrated

  6. Cold reservoir integrated into a brine circuit of energy roofing, coupled to a heat pump

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, M.

    1983-12-01

    Model studies are presented in which the economic effects of a cold reservoir integrated in a heat pump system were established. Cold reservoirs have the following advantages: 1. The absolute annual savings increase with the storage volume. Storage volumes of 1 to 10 m/sup 3/ are economical, depending on the mode of operation. 2. If the storage volume is sufficiently large, the heat pump (operated in a bivalent, parallel system) can supply a considerable amount of the required even below the design temperature. 3. With a sufficiently large storage volume, the heat pump may be operated in more or less monovalent mode even if the heat pump has not been designed for a minimum ambient temperature.

  7. INTEGRATED OUTCROP AND SUBSURFACE STUDIES OF THE INTERWELL ENVIRONMENT OF CARBONATE RESERVOIRS: CLEAR FORK (LEONARDIAN-AGE) RESERVOIRS, WEST TEXAS AND NEW MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    F. Jerry Lucia

    2002-01-31

    This is the final report of the project ''Integrated Outcrop and Subsurface Studies of the Interwell Environment of Carbonate Reservoirs: Clear Fork (Leonardian-Age) Reservoirs, West Texas and New Mexico'', Department of Energy contract no. DE-AC26-98BC15105 and is the third in a series of similar projects funded jointly by the U.S. Department of Energy and The University of Texas at Austin, Bureau of Economic Geology, Reservoir Characterization Research Laboratory for Carbonates. All three projects focus on the integration of outcrop and subsurface data for the purpose of developing improved methods for modeling petrophysical properties in the interwell environment. The first project, funded by contract no. DE-AC22-89BC14470, was a study of San Andres outcrops in the Algerita Escarpment, Guadalupe Mountains, Texas and New Mexico, and the Seminole San Andres reservoir, Permian Basin. This study established the basic concepts for constructing a reservoir model using sequence-stratigraphic principles and rock-fabric, petrophysical relationships. The second project, funded by contract no. DE-AC22-93BC14895, was a study of Grayburg outcrops in the Brokeoff Mountains, New Mexico, and the South Cowden Grayburg reservoir, Permian Basin. This study developed a sequence-stratigraphic succession for the Grayburg and improved methods for locating remaining hydrocarbons in carbonate ramp reservoirs. The current study is of the Clear Fork Group in Apache Canyon, Sierra Diablo Mountains, West Texas, and the South Wasson Clear Fork reservoir, Permian Basin. The focus was on scales of heterogeneity, imaging high- and low-permeability layers, and the impact of fractures on reservoir performance. In this study (1) the Clear Fork cycle stratigraphy is defined, (2) important scales of petrophysical variability are confirmed, (3) a unique rock-fabric, petrophysical relationship is defined, (4) a porosity method for correlating high-frequency cycles and defining rock

  8. Integrating desalination to reservoir operation to increase redundancy for more secure water supply

    Science.gov (United States)

    Bhushan, Rashi; Ng, Tze Ling

    2016-08-01

    We investigate the potential of integrating desalination to existing reservoir systems to mitigate supply uncertainty. Desalinated seawater and wastewater are relatively reliable but expensive. Water from natural resources like reservoirs is generally cheaper but climate sensitive. We propose combining the operation of a reservoir and seawater and wastewater desalination plants for an overall system that is less vulnerable to scarcity and uncertainty, while constraining total cost. The joint system is modeled as a multiobjective optimization problem with the double objectives of minimizing risk and vulnerability, subject to a minimum limit on resilience. The joint model is applied to two cases, one based on the climate and demands of a location in India and the other of a location in California. The results for the Indian case indicate that it is possible for the joint system to reduce risk and vulnerability to zero given a budget increase of 20-120% under current climate conditions and 30-150% under projected future conditions. For the Californian case, this would require budget increases of 20-80% and 30-140% under current and future conditions, respectively. Further, our analysis shows a two-way interaction between the reservoir and desalination plants where the optimal operation of the former is just as much affected by the latter as the latter by the former. This highlights the importance of an integrated management approach. This study contributes to a greater quantitative understanding of desalination as a redundancy measure for adapting water supply infrastructures for a future of greater scarcity and uncertainty.

  9. Integrated Reflection Seismic Monitoring and Reservoir Modeling for Geologic CO2 Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    John Rogers

    2011-12-31

    The US DOE/NETL CCS MVA program funded a project with Fusion Petroleum Technologies Inc. (now SIGMA) to model the proof of concept of using sparse seismic data in the monitoring of CO{sub 2} injected into saline aquifers. The goal of the project was to develop and demonstrate an active source reflection seismic imaging strategy based on deployment of spatially sparse surface seismic arrays. The primary objective was to test the feasibility of sparse seismic array systems to monitor the CO{sub 2} plume migration injected into deep saline aquifers. The USDOE/RMOTC Teapot Dome (Wyoming) 3D seismic and reservoir data targeting the Crow Mountain formation was used as a realistic proxy to evaluate the feasibility of the proposed methodology. Though the RMOTC field has been well studied, the Crow Mountain as a saline aquifer has not been studied previously as a CO{sub 2} sequestration (storage) candidate reservoir. A full reprocessing of the seismic data from field tapes that included prestack time migration (PSTM) followed by prestack depth migration (PSDM) was performed. A baseline reservoir model was generated from the new imaging results that characterized the faults and horizon surfaces of the Crow Mountain reservoir. The 3D interpretation was integrated with the petrophysical data from available wells and incorporated into a geocellular model. The reservoir structure used in the geocellular model was developed using advanced inversion technologies including Fusion's ThinMAN{trademark} broadband spectral inversion. Seal failure risk was assessed using Fusion's proprietary GEOPRESS{trademark} pore pressure and fracture pressure prediction technology. CO{sub 2} injection was simulated into the Crow Mountain with a commercial reservoir simulator. Approximately 1.2MM tons of CO{sub 2} was simulated to be injected into the Crow Mountain reservoir over 30 years and subsequently let 'soak' in the reservoir for 970 years. The relatively small plume

  10. Technology strategy for integrated operations and real time reservoir management; Technology Target Areas; TTA5 - Integrated operations and RTRM

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    In Norway Integrated Operations (IO) is a concept which in the first phase (G1) has been used to describe how to integrate processes and people onshore and offshore using ICT solutions and facilities that improve onshore's ability to support offshore operationally. The second generation (G2) Integrated Operations aims to help operators utilize vendors' core competencies and services more efficiently. Utilizing digital services and vendor products, operators will be able to update reservoir models, drilling targets and well trajectories as wells are drilled, manage well completions remotely, optimize production from reservoir to export lines, and implement condition-based maintenance concepts. The total impact on production, recovery rates, costs and safety will be profound. When the international petroleum business moves to the Arctic region the setting is very different from what is the case on the Norwegian Continental Shelf (NCS) and new challenges will arise. The Norwegian Ministry of Environment has recently issued an Integrated Management Plan for the Barents Sea where one focus is on 'Monitoring of the Marine Environment in the North'. The Government aims to establish a new and more coordinated system for monitoring the marine ecosystems in the north. A representative group consisting of the major Operators, the Service Industry, Academia and the Authorities have developed the enclosed strategy for the OG21 Integrated Operations and Real Time Reservoir Management (IO and RTRM) Technology Target Area (TTA). Major technology and work process research and development gaps have been identified in several areas: Bandwidth down-hole to surface; Sensor development including Nano-technology; Cross discipline use of Visualisation, Simulation and model development particularly in Drilling and Reservoir management areas; Software development in terms of data handling, model updating and calculation speed; Enabling reliable and robust communications particularly for

  11. Technology strategy for integrated operations and real time reservoir management; Technology Target Areas; TTA5 - Integrated operations and RTRM

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    In Norway Integrated Operations (IO) is a concept which in the first phase (G1) has been used to describe how to integrate processes and people onshore and offshore using ICT solutions and facilities that improve onshore's ability to support offshore operationally. The second generation (G2) Integrated Operations aims to help operators utilize vendors' core competencies and services more efficiently. Utilizing digital services and vendor products, operators will be able to update reservoir models, drilling targets and well trajectories as wells are drilled, manage well completions remotely, optimize production from reservoir to export lines, and implement condition-based maintenance concepts. The total impact on production, recovery rates, costs and safety will be profound. When the international petroleum business moves to the Arctic region the setting is very different from what is the case on the Norwegian Continental Shelf (NCS) and new challenges will arise. The Norwegian Ministry of Environment has recently issued an Integrated Management Plan for the Barents Sea where one focus is on 'Monitoring of the Marine Environment in the North'. The Government aims to establish a new and more coordinated system for monitoring the marine ecosystems in the north. A representative group consisting of the major Operators, the Service Industry, Academia and the Authorities have developed the enclosed strategy for the OG21 Integrated Operations and Real Time Reservoir Management (IO and RTRM) Technology Target Area (TTA). Major technology and work process research and development gaps have been identified in several areas: Bandwidth down-hole to surface; Sensor development including Nano-technology; Cross discipline use of Visualisation, Simulation and model development particularly in Drilling and Reservoir management areas; Software development in terms of data handling, model updating and calculation speed; Enabling reliable and robust communications

  12. The use of Quality-Adjusted Life Years in cost-effectiveness analyses in palliative care: Mapping the debate through an integrative review.

    Science.gov (United States)

    Wichmann, Anne B; Adang, Eddy Mm; Stalmeier, Peep Fm; Kristanti, Sinta; Van den Block, Lieve; Vernooij-Dassen, Myrra Jfj; Engels, Yvonne

    2017-04-01

    In cost-effectiveness analyses in healthcare, Quality-Adjusted Life Years are often used as outcome measure of effectiveness. However, there is an ongoing debate concerning the appropriateness of its use for decision-making in palliative care. To systematically map pros and cons of using the Quality-Adjusted Life Year to inform decisions on resource allocation among palliative care interventions, as brought forward in the debate, and to discuss the Quality-Adjusted Life Year's value for palliative care. The integrative review method of Whittemore and Knafl was followed. Theoretical arguments and empirical findings were mapped. A literature search was conducted in PubMed, EMBASE, and CINAHL, in which MeSH (Medical Subject Headings) terms were Palliative Care, Cost-Benefit Analysis, Quality of Life, and Quality-Adjusted Life Years. Three themes regarding the pros and cons were identified: (1) restrictions in life years gained, (2) conceptualization of quality of life and its measurement, including suggestions to adapt this, and (3) valuation and additivity of time, referring to changing valuation of time. The debate is recognized in empirical studies, but alternatives not yet applied. The Quality-Adjusted Life Year might be more valuable for palliative care if specific issues are taken into account. Despite restrictions in life years gained, Quality-Adjusted Life Years can be achieved in palliative care. However, in measuring quality of life, we recommend to-in addition to the EQ-5D- make use of quality of life or capability instruments specifically for palliative care. Also, we suggest exploring the possibility of integrating valuation of time in a non-linear way in the Quality-Adjusted Life Year.

  13. Caprock Integrity during Hydrocarbon Production and CO2 Injection in the Goldeneye Reservoir

    Science.gov (United States)

    Salimzadeh, Saeed; Paluszny, Adriana; Zimmerman, Robert

    2016-04-01

    Carbon Capture and Storage (CCS) is a key technology for addressing climate change and maintaining security of energy supplies, while potentially offering important economic benefits. UK offshore, depleted hydrocarbon reservoirs have the potential capacity to store significant quantities of carbon dioxide, produced during power generation from fossil fuels. The Goldeneye depleted gas condensate field, located offshore in the UK North Sea at a depth of ~ 2600 m, is a candidate for the storage of at least 10 million tons of CO2. In this research, a fully coupled, full-scale model (50×20×8 km), based on the Goldeneye reservoir, is built and used for hydro-carbon production and CO2 injection simulations. The model accounts for fluid flow, heat transfer, and deformation of the fractured reservoir. Flow through fractures is defined as two-dimensional laminar flow within the three-dimensional poroelastic medium. The local thermal non-equilibrium between injected CO2 and host reservoir has been considered with convective (conduction and advection) heat transfer. The numerical model has been developed using standard finite element method with Galerkin spatial discretisation, and finite difference temporal discretisation. The geomechanical model has been implemented into the object-oriented Imperial College Geomechanics Toolkit, in close interaction with the Complex Systems Modelling Platform (CSMP), and validated with several benchmark examples. Fifteen major faults are mapped from the Goldeneye field into the model. Modal stress intensity factors, for the three modes of fracture opening during hydrocarbon production and CO2 injection phases, are computed at the tips of the faults by computing the I-Integral over a virtual disk. Contact stresses -normal and shear- on the fault surfaces are iteratively computed using a gap-based augmented Lagrangian-Uzawa method. Results show fault activation during the production phase that may affect the fault's hydraulic conductivity

  14. Application of integrated reservoir management and reservoir characterization to optimize infill drilling. Quarterly progress report, June 13, 1995--September 12, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Pande, P.K.

    1995-09-12

    At this stage of the reservoir characterization research, the main emphasis is on the geostatistics and reservoir simulation. Progress is reported on geological analysis, reservoir simulation, and reservoir management.

  15. Integrating geologic and engineering data into 3-D reservoir models: an example from norman wells field, NWT, Canada

    International Nuclear Information System (INIS)

    Yose, L.A.

    2004-01-01

    A case study of the Norman Wells field will be presented to highlight the work-flow and data integration steps associated with characterization and modeling of a complex hydrocarbon reservoir. Norman Wells is a Devonian-age carbonate bank ('reef') located in the Northwest Territories of Canada, 60 kilometers south of the Arctic Circle. The reservoir reaches a maximum thickness of 130 meters in the reef interior and thins toward the basin due to depositional pinch outs. Norman Wells is an oil reservoir and is currently under a 5-spot water injection scheme for enhanced oil recovery (EOR). EOR strategies require a detailed understanding of how reservoir flow units, flow barriers and flow baffles are distributed to optimize hydrocarbon sweep and recovery and to minimize water handling. Reservoir models are routinely used by industry to characterize the 3-D distribution of reservoir architecture (stratigraphic layers, depositional facies, faults) and rock properties (porosity. permeability). Reservoir models are validated by matching historical performance data (e.g., reservoir pressures, well production or injection rates). Geologic models are adjusted until they produce a history match, and model adjustments are focused on inputs that have the greatest geologic uncertainty. Flow simulation models are then used to optimize field development strategies and to forecast field performance under different development scenarios. (author)

  16. Enhanced heavy oil recovery for carbonate reservoirs integrating cross-well seismic–a synthetic Wafra case study

    KAUST Repository

    Katterbauer, Klemens

    2015-07-14

    Heavy oil recovery has been a major focus in the oil and gas industry to counter the rapid depletion of conventional reservoirs. Various techniques for enhancing the recovery of heavy oil were developed and pilot-tested, with steam drive techniques proven in most circumstances to be successful and economically viable. The Wafra field in Saudi Arabia is at the forefront of utilizing steam recovery for carbonate heavy oil reservoirs in the Middle East. With growing injection volumes, tracking the steam evolution within the reservoir and characterizing the formation, especially in terms of its porosity and permeability heterogeneity, are key objectives for sound economic decisions and enhanced production forecasts. We have developed an integrated reservoir history matching framework using ensemble based techniques incorporating seismic data for enhancing reservoir characterization and improving history matches. Examining the performance on a synthetic field study of the Wafra field, we could demonstrate the improved characterization of the reservoir formation, determining more accurately the position of the steam chambers and obtaining more reliable forecasts of the reservoir’s recovery potential. History matching results are fairly robust even for noise levels up to 30%. The results demonstrate the potential of the integration of full-waveform seismic data for steam drive reservoir characterization and increased recovery efficiency.

  17. Integrated workflow for characterizing and modeling fracture network in unconventional reservoirs using microseismic data

    Science.gov (United States)

    Ayatollahy Tafti, Tayeb

    We develop a new method for integrating information and data from different sources. We also construct a comprehensive workflow for characterizing and modeling a fracture network in unconventional reservoirs, using microseismic data. The methodology is based on combination of several mathematical and artificial intelligent techniques, including geostatistics, fractal analysis, fuzzy logic, and neural networks. The study contributes to scholarly knowledge base on the characterization and modeling fractured reservoirs in several ways; including a versatile workflow with a novel objective functions. Some the characteristics of the methods are listed below: 1. The new method is an effective fracture characterization procedure estimates different fracture properties. Unlike the existing methods, the new approach is not dependent on the location of events. It is able to integrate all multi-scaled and diverse fracture information from different methodologies. 2. It offers an improved procedure to create compressional and shear velocity models as a preamble for delineating anomalies and map structures of interest and to correlate velocity anomalies with fracture swarms and other reservoir properties of interest. 3. It offers an effective way to obtain the fractal dimension of microseismic events and identify the pattern complexity, connectivity, and mechanism of the created fracture network. 4. It offers an innovative method for monitoring the fracture movement in different stages of stimulation that can be used to optimize the process. 5. Our newly developed MDFN approach allows to create a discrete fracture network model using only microseismic data with potential cost reduction. It also imposes fractal dimension as a constraint on other fracture modeling approaches, which increases the visual similarity between the modeled networks and the real network over the simulated volume.

  18. Integrated hydrologic and hydrodynamic modeling to assess water exchange in a data-scarce reservoir

    Science.gov (United States)

    Wu, Binbin; Wang, Guoqiang; Wang, Zhonggen; Liu, Changming; Ma, Jianming

    2017-12-01

    Integrated hydrologic and hydrodynamic modeling is useful in evaluating hydrodynamic characteristics (e.g. water exchange processes) in data-scarce water bodies, however, most studies lack verification of the hydrologic model. Here, water exchange (represented by water age) was investigated through integrated hydrologic and hydrodynamic modeling of the Hongfeng Reservoir, a poorly gauged reservoir in southwest China. The performance of the hydrologic model and parameter replacement among sub-basins with hydrological similarity was verified by historical data. Results showed that hydrological similarity based on the hierarchical cluster analysis and topographic index probability density distribution was reliable with satisfactory performance of parameter replacement. The hydrodynamic model was verified using daily water levels and water temperatures from 2009 and 2010. The water exchange processes in the Hongfeng Reservoir are very complex with temporal, vertical, and spatial variations. The temporal water age was primarily controlled by the variable inflow and outflow, and the maximum and minimum ages for the site near the dam were 406.10 d (15th June) and 90.74 d (3rd August), respectively, in 2010. Distinct vertical differences in water age showed that surface flow, interflow, and underflow appeared alternately, depending on the season and water depth. The worst water exchange situation was found in the central areas of the North Lake with the highest water ages in the bottom on both 15th June and 3rd August, in 2010. Comparison of the spatial water ages revealed that the more favorable hydraulic conditions on 3rd August mainly improved the water exchange in the dam areas and most areas of the South Lake, but had little effect on the bottom layers of the other deepest areas in the South and North Lakes. The presented framework can be applied in other data-scarce waterbodies worldwide to provide better understanding of water exchange processes.

  19. Integrated petrophysical and reservoir characterization workflow to enhance permeability and water saturation prediction

    Science.gov (United States)

    Al-Amri, Meshal; Mahmoud, Mohamed; Elkatatny, Salaheldin; Al-Yousef, Hasan; Al-Ghamdi, Tariq

    2017-07-01

    Accurate estimation of permeability is essential in reservoir characterization and in determining fluid flow in porous media which greatly assists optimize the production of a field. Some of the permeability prediction techniques such as Porosity-Permeability transforms and recently artificial intelligence and neural networks are encouraging but still show moderate to good match to core data. This could be due to limitation to homogenous media while the knowledge about geology and heterogeneity is indirectly related or absent. The use of geological information from core description as in Lithofacies which includes digenetic information show a link to permeability when categorized into rock types exposed to similar depositional environment. The objective of this paper is to develop a robust combined workflow integrating geology and petrophysics and wireline logs in an extremely heterogeneous carbonate reservoir to accurately predict permeability. Permeability prediction is carried out using pattern recognition algorithm called multi-resolution graph-based clustering (MRGC). We will bench mark the prediction results with hard data from core and well test analysis. As a result, we showed how much better improvements are achieved in the permeability prediction when geology is integrated within the analysis. Finally, we use the predicted permeability as an input parameter in J-function and correct for uncertainties in saturation calculation produced by wireline logs using the classical Archie equation. Eventually, high level of confidence in hydrocarbon volumes estimation is reached when robust permeability and saturation height functions are estimated in presence of important geological details that are petrophysically meaningful.

  20. Reservoir management

    International Nuclear Information System (INIS)

    Satter, A.; Varnon, J.E.; Hoang, M.T.

    1992-01-01

    A reservoir's life begins with exploration leading to discovery followed by delineation of the reservoir, development of the field, production by primary, secondary and tertiary means, and finally to abandonment. Sound reservoir management is the key to maximizing economic operation of the reservoir throughout its entire life. Technological advances and rapidly increasing computer power are providing tools to better manage reservoirs and are increasing the gap between good and neural reservoir management. The modern reservoir management process involves goal setting, planning, implementing, monitoring, evaluating, and revising plans. Setting a reservoir management strategy requires knowledge of the reservoir, availability of technology, and knowledge of the business, political, and environmental climate. Formulating a comprehensive management plan involves depletion and development strategies, data acquisition and analyses, geological and numerical model studies, production and reserves forecasts, facilities requirements, economic optimization, and management approval. This paper provides management, engineers, geologists, geophysicists, and field operations staff with a better understanding of the practical approach to reservoir management using a multidisciplinary, integrated team approach

  1. Reservoir management

    International Nuclear Information System (INIS)

    Satter, A.; Varnon, J.E.; Hoang, M.T.

    1992-01-01

    A reservoir's life begins with exploration leading to discovery followed by delineation of the reservoir, development of the field, production by primary, secondary and tertiary means, and finally to abandonment. Sound reservoir management is the key to maximizing economic operation of the reservoir throughout its entire life. Technological advances and rapidly increasing computer power are providing tools to better manage reservoirs and are increasing the gap between good and neutral reservoir management. The modern reservoir management process involves goal setting, planning, implementing, monitoring, evaluating, and revising plans. Setting a reservoir management strategy requires knowledge of the reservoir, availability of technology, and knowledge of the business, political, and environmental climate. Formulating a comprehensive management plan involves depletion and development strategies, data acquisition and analyses, geological and numerical model studies, production and reserves forecasts, facilities requirements, economic optimization, and management approval. This paper provides management, engineers geologists, geophysicists, and field operations staff with a better understanding of the practical approach to reservoir management using a multidisciplinary, integrated team approach

  2. Efficient Operation of a Multi-purpose Reservoir in Chile: Integration of Economic Water Value for Irrigation and Hydropower

    Science.gov (United States)

    Olivares, M. A.; Gonzalez Cabrera, J. M., Sr.; Moreno, R.

    2016-12-01

    Operation of hydropower reservoirs in Chile is prescribed by an Independent Power System Operator. This study proposes a methodology that integrates power grid operations planning with basin-scale multi-use reservoir operations planning. The aim is to efficiently manage a multi-purpose reservoir, in which hydroelectric generation is competing with other water uses, most notably irrigation. Hydropower and irrigation are competing water uses due to a seasonality mismatch. Currently, the operation of multi-purpose reservoirs with substantial power capacity is prescribed as the result of a grid-wide cost-minimization model which takes irrigation requirements as constraints. We propose advancing in the economic co-optimization of reservoir water use for irrigation and hydropower at the basin level, by explicitly introducing the economic value of water for irrigation represented by a demand function for irrigation water. The proposed methodology uses the solution of a long-term grid-wide operations planning model, a stochastic dual dynamic program (SDDP), to obtain the marginal benefit function for water use in hydropower. This marginal benefit corresponds to the energy price in the power grid as a function of the water availability in the reservoir and the hydrologic scenarios. This function allows capture technical and economic aspects to the operation of hydropower reservoir in the power grid and is generated with the dual variable of the power-balance constraint, the optimal reservoir operation and the hydrologic scenarios used in SDDP. The economic value of water for irrigation and hydropower are then integrated into a basin scale stochastic dynamic program, from which stored water value functions are derived. These value functions are then used to re-optimize reservoir operations under several inflow scenarios.

  3. Integrated Sedimentological Approach to Assess Reservoir Quality and Architecture of Khuff Carbonates: Outcrop Analog, Central Saudi Arabia

    Science.gov (United States)

    Osman, Mutsim; Abdullatif, Osman

    2017-04-01

    The Permian to Triassic Khuff carbonate reservoirs (and equivalents) in the Middle East are estimated to contain about 38.4% of the world's natural gas reserves. Excellent exposed outcrops in central Saudi Arabia provide good outcrop equivalents to subsurface Khuff reservoirs. This study conduct high resolution outcrop scale investigations on an analog reservoir for upper Khartam of Khuff Formation. The main objective is to reconstruct litho- and chemo- stratigraphic outcrop analog model that may serve to characterize reservoir high resolution (interwell) heterogeneity, continuity and architecture. Given the fact of the limitation of subsurface data and toolsin capturing interwell reservoir heterogeneity, which in turn increases the value of this study.The methods applied integrate sedimentological, stratigraphic petrographic, petrophysical data and chemical analyses for major, trace and rare earth elements. In addition, laser scanning survey (LIDAR) was also utilized in this study. The results of the stratigraphic investigations revealed that the lithofacies range from mudstone, wackestone, packestone and grainstone. These lithofacies represent environments ranging from supratidal, intertidal, subtidal and shoal complex. Several meter-scale and less high resolution sequences and composite sequences within 4th and 5th order cycles were also recognized in the outcrop analog. The lithofacies and architectural analysis revealed several vertically and laterally stacked sequences at the outcrop as revealed from the stratigraphic sections and the lidar scan. Chemostratigraphy is effective in identifying lithofacies and sequences within the outcrop analog. Moreover, different chemical signatures were also recognized and allowed establishing and correlating high resolution lithofacies, reservoir zones, layers and surfaces bounding reservoirs and non-reservoir zones at scale of meters or less. The results of this high resolution outcrop analog study might help to understand

  4. Effectiveness and cost-effectiveness of a proactive, goal-oriented, integrated care model in general practice for older people. A cluster randomised controlled trial: Integrated Systematic Care for older People--the ISCOPE study.

    Science.gov (United States)

    Blom, Jeanet; den Elzen, Wendy; van Houwelingen, Anne H; Heijmans, Margot; Stijnen, Theo; Van den Hout, Wilbert; Gussekloo, Jacobijn

    2016-01-01

    older people often experience complex problems. Because of multiple problems, care for older people in general practice needs to shift from a 'problem-based, disease-oriented' care aiming at improvement of outcomes per disease to a 'goal-oriented care', aiming at improvement of functioning and personal quality of life, integrating all healthcare providers. Feasibility and cost-effectiveness of this proactive and integrated way of working are not yet established. cluster randomised trial. all persons aged ≥75 in 59 general practices (30 intervention, 29 control), with a combination of problems, as identified with a structured postal questionnaire with 21 questions on four health domains. for participants with problems on ≥3 domains, general practitioners (GPs) made an integrated care plan using a functional geriatric approach. Control practices: care as usual. (i) quality of life (QoL), (ii) activities of daily living, (iii) satisfaction with delivered health care and (iv) cost-effectiveness of the intervention at 1-year follow-up. Netherlands trial register, NTR1946. of the 11,476 registered eligible older persons, 7,285 (63%) participated in the screening. One thousand nine hundred and twenty-one (26%) had problems on ≥3 health domains. For 225 randomly chosen persons, a care plan was made. No beneficial effects were found on QoL, patients' functioning or healthcare use/costs. GPs experienced better overview of the care and stability, e.g. less unexpected demands, in the care. GPs prefer proactive integrated care. 'Horizontal' care using care plans for older people with complex problems can be a valuable tool in general practice. However, no direct beneficial effect was found for older persons. © The Author 2016. Published by Oxford University Press on behalf of the British Geriatrics Society.

  5. Integrating sequence stratigraphy and rock-physics to interpret seismic amplitudes and predict reservoir quality

    Science.gov (United States)

    Dutta, Tanima

    This dissertation focuses on the link between seismic amplitudes and reservoir properties. Prediction of reservoir properties, such as sorting, sand/shale ratio, and cement-volume from seismic amplitudes improves by integrating knowledge from multiple disciplines. The key contribution of this dissertation is to improve the prediction of reservoir properties by integrating sequence stratigraphy and rock physics. Sequence stratigraphy has been successfully used for qualitative interpretation of seismic amplitudes to predict reservoir properties. Rock physics modeling allows quantitative interpretation of seismic amplitudes. However, often there is uncertainty about selecting geologically appropriate rock physics model and its input parameters, away from the wells. In the present dissertation, we exploit the predictive power of sequence stratigraphy to extract the spatial trends of sedimentological parameters that control seismic amplitudes. These spatial trends of sedimentological parameters can serve as valuable constraints in rock physics modeling, especially away from the wells. Consequently, rock physics modeling, integrated with the trends from sequence stratigraphy, become useful for interpreting observed seismic amplitudes away from the wells in terms of underlying sedimentological parameters. We illustrate this methodology using a comprehensive dataset from channelized turbidite systems, deposited in minibasin settings in the offshore Equatorial Guinea, West Africa. First, we present a practical recipe for using closed-form expressions of effective medium models to predict seismic velocities in unconsolidated sandstones. We use an effective medium model that combines perfectly rough and smooth grains (the extended Walton model), and use that model to derive coordination number, porosity, and pressure relations for P and S wave velocities from experimental data. Our recipe provides reasonable fits to other experimental and borehole data, and specifically

  6. Integrated reservoir characterization of a Posidonia Shale outcrop analogue: From serendipity to understanding

    NARCIS (Netherlands)

    Zijp, M.H.A.A.; Veen, J.H. ten; Verreussel, R.M.C.H.; Ventra, D.

    2014-01-01

    Shale gas reservoir stimulation procedures (e.g. hydraulic fracturing) require upfront prediction and planning that should be supported by a comprehensive reservoir characterization. Therefore, understanding shale depositional processes and associated vertical and lateral sedimentological

  7. Mapping of Reservoir Properties and Facies Through Integration of Static and Dynamic Data

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Albert C.; Oliver, Dean S.; Zhang, Fengjun; Dong, Yannong; Skjervheim, Jan Arild; Liu, Ning

    2003-03-10

    The goal of this project was to develop computationally efficient automatic history matching techniques for generating geologically plausible reservoir models which honor both static and dynamic data. Solution of this problem was necessary for the quantification of uncertainty in future reservoir performance predictions and for the optimization of reservoir management.

  8. Mapping of Reservoir Properties and Facies Through Integration of Static and Dynamic Data

    Energy Technology Data Exchange (ETDEWEB)

    Oliver, Dean S.; Reynolds, Albert C.; Zhang, Fengjun; Li, Ruijian; Abacioglu, Yafes; Dong, Yannong

    2002-03-05

    The goal of this project was to develop computationally efficient automatic history matching techniques for generating geologically plausible reservoir models which honor both static and dynamic data. Solution of this problem is necessary for the quantification of uncertainty in future reservoir performance predictions and for the optimization of reservoir management.

  9. Integrated 3D Reservoir/Fault Property Modelling Aided Well Planning and Improved Hydrocarbon Recovery in a Niger Delta Field

    International Nuclear Information System (INIS)

    Onyeagoro, U. O.; Ebong, U. E.; Nworie, E. A.

    2002-01-01

    The large and varied portfolio of assets managed by oil companies requires quick decision-making and the deployment of best in class technologies in asset management. Timely decision making and the application of the best technologies in reservoir management are however sometimes in conflict due to large time requirements of the latter.Optimizing the location of development wells is critical to account for variable fluid contact movements and pressure interference effects between wells, which can be significant because of the high permeability (Darcy range) of Niger Delta reservoirs. With relatively high drilling costs, the optimization of well locations necessitates a good realistic static and dynamic 3D reservoir description, especially in the recovery of remaining oil and oil rim type of reservoirs.A detailed 3D reservoir model with fault properties was constructed for a Niger delta producing field. This involved the integration of high quality 3D seismic, core, petrophysics, reservoir engineering, production and structural geology data to construct a realistic 3D reservoir/fault property model for the field. The key parameters considered during the construction of the internal architecture of the model were the vertical and horizontal reservoir heterogeneities-this controls the fluid flow within the reservoir. In the production realm, the fault thickness and fault permeabilities are factors that control the impedance of fluid flow across the fault-fault transmissibility. These key internal and external reservoir/structural variables were explicitly modeled in a 3D modeling software to produce different realizations and manage the uncertainties.The resulting 3D reservoir/fault property model was upscaled for simulation purpose such that grid blocks along the fault planes have realistic transmissibility multipliers of 0 to 1 attached to them. The model was also used in the well planner to optimize the positioning of a high angle deviated well that penetrated

  10. Integrated method to optimize well connection and platform placement on a multi-reservoir scenario

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Sergio Henrique Guerra de; Madeira, Marcelo Gomes; Franca, Martha Salles [Halliburton, Rio de Janeiro, RJ (Brazil); Mota, Rosane Oliveira; Silva, Edilon Ribeiro da; King, Vanessa Pereira Spear [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    This paper describes a workflow created to optimize the platform placement and well-platform connections on a multi reservoir scenario using an integrated reservoir simulator paired with an optimization engine. The proposed methodology describes how a new platform, being incorporated into a pre-existing asset, can be better used to develop newly-discovered fields, while helping increase the production of existing fields by sharing their production load. The sharing of production facilities is highly important in Brazilian offshore assets because of their high price (a few billion dollars per facility) and the fact that total production is usually limited to the installed capacity of liquid processing, which is an important constraint on high water-cut well production rates typical to this region. The case study asset used to present the workflow consists of two deep water oil fields, each one developed by its own production platform, and a newly-discovered field with strong aquifer support that will be entirely developed with a new production platform. Because this new field should not include injector wells owing to the strong aquifer presence, the idea is to consider reconnecting existing wells from the two pre-existing fields to better use the production resources. In this scenario, the platform location is an important optimization issue, as a balance between supporting the production of the planned wells on the new field and the production of re-routed wells from the existing fields must be reached to achieve improved overall asset production. If the new platform is too far away from any interconnected production well, pressure-drop issues along the pipeline might actually decrease production from the existing fields rather than augment it. The main contribution of this work is giving the reader insights on how to model and optimize these complex decisions to generate high-quality scenarios. (author)

  11. An Integrated Study of the Grayburg/San Andres Reservoir, Foster and South Cowden Fields, Ector County, Texas, Class II

    Energy Technology Data Exchange (ETDEWEB)

    Trentham, Robert C.; Weinbrandt, Richard; Robinson, William C.; Widner, Kevin

    2001-05-03

    The objectives of the project were to: (1) Thoroughly understand the 60-year history of the field. (2) Develop a reservoir description using geology and 3D seismic. (3) Isolate the upper Grayburg in wells producing from multiple intervals to stop cross flow. (4) Re-align and optimize the upper Grayburg waterflood. (5) Determine well condition, identify re-frac candidates, evaluate the effectiveness of well work and obtain bottom hole pressure data for simulation utilizing pressure transient testing field wide. (6) Quantitatively integrate all the data to guide the field operations, including identification of new well locations utilizing reservoir simulation.

  12. Integrated reservoir assessment and characterization: Final report, October 1, 1985--September 30, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Honarpour, M.; Szpakiewicz, M.; Sharma, B.; Chang, Ming-Ming; Schatzinger, R.; Jackson, S.; Tomutsa, L.; Maerefat, N.

    1989-05-01

    This report covers the development of a generic approach to reservoir characterization, the preliminary studies leading to the selection of an appropriate depositional system for detailed study, the application of outcrop studies to quantified reservoir characterization, and the construction of a quantified geological/engineering model used to screen the effects and scales of various geological heterogeneities within a reservoir. These heterogeneities result in large production/residual oil saturation contrasts over small distances. 36 refs., 124 figs., 38 tabs.

  13. Cost-effectiveness analysis of the national implementation of integrated community case management and community-based health planning and services in Ghana for the treatment of malaria, diarrhoea and pneumonia.

    Science.gov (United States)

    Escribano Ferrer, Blanca; Hansen, Kristian Schultz; Gyapong, Margaret; Bruce, Jane; Narh Bana, Solomon A; Narh, Clement T; Allotey, Naa-Korkor; Glover, Roland; Azantilow, Naa-Charity; Bart-Plange, Constance; Sagoe-Moses, Isabella; Webster, Jayne

    2017-07-05

    Ghana has developed two main community-based strategies that aim to increase access to quality treatment for malaria, diarrhoea and suspected pneumonia: the integrated community case management (iCCM) and the community-based health planning and services (CHPS). The aim of the study was to assess the cost-effectiveness of these strategies under programme conditions. A cost-effectiveness analysis was conducted. Appropriate diagnosis and treatment given was the effectiveness measure used. Appropriate diagnosis and treatment data was obtained from a household survey conducted 2 and 8 years after implementation of iCCM in the Volta and Northern Regions of Ghana, respectively. The study population was carers of children under-5 years who had fever, diarrhoea and/or cough in the last 2 weeks prior to the interview. Costs data was obtained mainly from the National Malaria Control Programme (NMCP), the Ministry of Health, CHPS compounds and from a household survey. Appropriate diagnosis and treatment of malaria, diarrhoea and suspected pneumonia was more cost-effective under the iCCM than under CHPS in the Volta Region, even after adjusting for different discount rates, facility costs and iCCM and CHPS utilization, but not when iCCM appropriate treatment was reduced by 50%. Due to low numbers of carers visiting a CBA in the Northern Region it was not possible to conduct a cost-effectiveness analysis in this region. However, the cost analysis showed that iCCM in the Northern Region had higher cost per malaria, diarrhoea and suspected pneumonia case diagnosed and treated when compared to the Volta Region and to the CHPS strategy in the Northern Region. Integrated community case management was more cost-effective than CHPS for the treatment of malaria, diarrhoea and suspected pneumonia when utilized by carers of children under-5 years in the Volta Region. A revision of the iCCM strategy in the Northern Region is needed to improve its cost-effectiveness. Long-term financing

  14. Model Development to Establish Integrated Operational Rule Curves for Hungry Horse and Libby Reservoirs - Montana, 1996 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Marotz, Brian; Althen, Craig; Gustafson, Daniel

    1996-01-01

    Hungry Horse and Libby dams have profoundly affected the aquatic ecosystems in two major tributaries of the Columbia River by altering habitat and water quality, and by imposing barriers to fish migration. In 1980, the U.S. Congress passed the Pacific Northwest Electric Power Planning and Conservation Act, designed in part to balance hydropower development with other natural resources in the Columbia System. The Act formed the Northwest Power Planning Council (Council) who developed a program to protect, mitigate and enhance fish and wildlife on the Columbia River and its tributaries. Pursuant to the Council`s Fish and Wildlife Program for the Columbia River System (1987), we constructed computer models to simulate the trophic dynamics of the reservoir biota as related to dam operation. Results were used to develop strategies to minimize impacts and enhance the reservoir and riverine fisheries, following program measures 903(a)(1-4) and 903(b)(1-5). Two FORTRAN simulation models were developed for Hungry Horse and Libby reservoirs located in northwestern Montana. The models were designed to generate accurate, short-term predictions specific to two reservoirs and are not directly applicable to other waters. The modeling strategy, however, is portable to other reservoir systems where sufficient data are available. Reservoir operation guidelines were developed to balance fisheries concerns in the headwaters with anadromous species recovery actions in the lower Columbia (Biological Rule Curves). These BRCs were then integrated with power production and flood control to reduce the economic impact of basin-wide fisheries recovery actions. These Integrated Rule Curves (IRCs) were developed simultaneously in the Columbia Basin System Operation Review (SOR), the Council`s phase IV amendment process and recovery actions associated with endangered Columbia Basin fish species.

  15. Carbon Sequestration in a Large Hydroelectric Reservoir: An Integrative Seismic Approach

    NARCIS (Netherlands)

    Mendonca, R.; Kosten, S.; Sobek, S.; Cole, J.J.; Bastos, A.C.; Albuquerque, A.L.; Cardoso, S.J.; Roland, F.

    2014-01-01

    Artificial reservoirs likely accumulate more carbon than natural lakes due to their unusually high sedimentation rates. Nevertheless, the actual magnitude of carbon accumulating in reservoirs is poorly known due to a lack of whole-system studies of carbon burial. We determined the organic carbon

  16. Reservoir Modeling by Data Integration via Intermediate Spaces and Artificial Intelligence Tools in MPS Simulation Frameworks

    International Nuclear Information System (INIS)

    Ahmadi, Rouhollah; Khamehchi, Ehsan

    2013-01-01

    Conditioning stochastic simulations are very important in many geostatistical applications that call for the introduction of nonlinear and multiple-point data in reservoir modeling. Here, a new methodology is proposed for the incorporation of different data types into multiple-point statistics (MPS) simulation frameworks. Unlike the previous techniques that call for an approximate forward model (filter) for integration of secondary data into geologically constructed models, the proposed approach develops an intermediate space where all the primary and secondary data are easily mapped onto. Definition of the intermediate space, as may be achieved via application of artificial intelligence tools like neural networks and fuzzy inference systems, eliminates the need for using filters as in previous techniques. The applicability of the proposed approach in conditioning MPS simulations to static and geologic data is verified by modeling a real example of discrete fracture networks using conventional well-log data. The training patterns are well reproduced in the realizations, while the model is also consistent with the map of secondary data

  17. Reservoir Modeling by Data Integration via Intermediate Spaces and Artificial Intelligence Tools in MPS Simulation Frameworks

    Energy Technology Data Exchange (ETDEWEB)

    Ahmadi, Rouhollah, E-mail: rouhollahahmadi@yahoo.com [Amirkabir University of Technology, PhD Student at Reservoir Engineering, Department of Petroleum Engineering (Iran, Islamic Republic of); Khamehchi, Ehsan [Amirkabir University of Technology, Faculty of Petroleum Engineering (Iran, Islamic Republic of)

    2013-12-15

    Conditioning stochastic simulations are very important in many geostatistical applications that call for the introduction of nonlinear and multiple-point data in reservoir modeling. Here, a new methodology is proposed for the incorporation of different data types into multiple-point statistics (MPS) simulation frameworks. Unlike the previous techniques that call for an approximate forward model (filter) for integration of secondary data into geologically constructed models, the proposed approach develops an intermediate space where all the primary and secondary data are easily mapped onto. Definition of the intermediate space, as may be achieved via application of artificial intelligence tools like neural networks and fuzzy inference systems, eliminates the need for using filters as in previous techniques. The applicability of the proposed approach in conditioning MPS simulations to static and geologic data is verified by modeling a real example of discrete fracture networks using conventional well-log data. The training patterns are well reproduced in the realizations, while the model is also consistent with the map of secondary data.

  18. Improved prediction of reservoir behavior through integration of quantitative geological and petrophysical data

    Energy Technology Data Exchange (ETDEWEB)

    Auman, J. B.; Davies, D. K.; Vessell, R. K.

    1997-08-01

    Methodology that promises improved reservoir characterization and prediction of permeability, production and injection behavior during primary and enhanced recovery operations was demonstrated. The method is based on identifying intervals of unique pore geometry by a combination of image analysis techniques and traditional petrophysical measurements to calculate rock type and estimate permeability and saturation. Results from a complex carbonate and sandstone reservoir were presented as illustrative examples of the versatility and high level of accuracy of this method in predicting reservoir quality. 16 refs., 5 tabs., 14 figs.

  19. Integration of advanced geoscience and engineering techniques to quantify interwell heterogeneity in reservoir models. Final report, September 29, 1993--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, W.W.; Buckley, J.S.; Ouenes, A.

    1997-05-01

    The goal of this three-year project was to provide a quantitative definition of reservoir heterogeneity. This objective was accomplished through the integration of geologic, geophysical, and engineering databases into a multi-disciplinary understanding of reservoir architecture and associated fluid-rock and fluid-fluid interactions. This interdisciplinary effort integrated geological and geophysical data with engineering and petrophysical results through reservoir simulation to quantify reservoir architecture and the dynamics of fluid-rock and fluid-fluid interactions. An improved reservoir description allows greater accuracy and confidence during simulation and modeling as steps toward gaining greater recovery efficiency from existing reservoirs. A field laboratory, the Sulimar Queen Unit, was available for the field research. Several members of the PRRC staff participated in the development of improved reservoir description by integration of the field and laboratory data as well as in the development of quantitative reservoir models to aid performance predictions. Subcontractors from Stanford University and the University of Texas at Austin (UT) collaborated in the research and participated in the design and interpretation of field tests. The three-year project was initiated in September 1993 and led to the development and application of various reservoir description methodologies. A new approach for visualizing production data graphically was developed and implemented on the Internet. Using production data and old gamma rays logs, a black oil reservoir model that honors both primary and secondary performance was developed. The old gamma ray logs were used after applying a resealing technique, which was crucial for the success of the project. In addition to the gamma ray logs, the development of the reservoir model benefitted from an inverse Drill Stem Test (DST) technique which provided initial estimates of the reservoir permeability at different wells.

  20. Cold fronts and reservoir limnology: an integrated approach towards the ecological dynamics of freshwater ecosystems.

    Science.gov (United States)

    Tundisi, J G; Matsumura-Tundisi, T; Pereira, K C; Luzia, A P; Passerini, M D; Chiba, W A C; Morais, M A; Sebastien, N Y

    2010-10-01

    In this paper the authors discuss the effects of cold fronts on the dynamics of freshwater ecosystems of southeast South America. Cold fronts originating from the Antarctic show a monthly frequency that promotes turbulence and vertical mixing in reservoirs with a consequence to homogenize nutrient distribution, dissolved oxygen and temperature. Weak thermoclines and the athelomixis process immediately before, during and after the passage of cold fronts interfere with phytoplankton succession in reservoirs. Cyanobacteria blooms in eutrophic reservoirs are frequently connected with periods of stratification and stability of the water column. Cold fronts in the Amazon and Pantanal lakes may produce fish killings during the process of "friagem" associated mixing events. Further studies will try to implement a model to predict the impact of cold fronts and prepare management procedures in order to cope with cyanobacteria blooms during warm and stable water column periods. Changes in water quality of reservoirs are expected during circulation periods caused by cold fronts.

  1. Cold fronts and reservoir limnology: an integrated approach towards the ecological dynamics of freshwater ecosystems

    Directory of Open Access Journals (Sweden)

    JG. Tundisi

    Full Text Available In this paper the authors discuss the effects of cold fronts on the dynamics of freshwater ecosystems of southeast South America. Cold fronts originating from the Antarctic show a monthly frequency that promotes turbulence and vertical mixing in reservoirs with a consequence to homogenize nutrient distribution, dissolved oxygen and temperature. Weak thermoclines and the athelomixis process immediately before, during and after the passage of cold fronts interfere with phytoplankton succession in reservoirs. Cyanobacteria blooms in eutrophic reservoirs are frequently connected with periods of stratification and stability of the water column. Cold fronts in the Amazon and Pantanal lakes may produce fish killings during the process of "friagem" associated mixing events. Further studies will try to implement a model to predict the impact of cold fronts and prepare management procedures in order to cope with cyanobacteria blooms during warm and stable water column periods. Changes in water quality of reservoirs are expected during circulation periods caused by cold fronts.

  2. Controlling Eutrophication in A Mediterranean Shallow Reservoir by Phosphorus Loading Reduction: The Need for an Integrated Management Approach

    Science.gov (United States)

    Zaragüeta, Mikel; Acebes, Pablo

    2017-04-01

    Increased nutrient enrichment in Mediterranean standing waters has enhanced the risk of being affected by cyanobacterial blooms. Because phosphorus abatement is shaped as a crucial strategy for controlling eutrophication, this study introduces a structural thinking, experiential learning laboratory with animation dynamic model elaborated for Cazalegas Reservoir (Spain) to assess the feasibility of implementing a set of internal and external control measures and hydromorphological adjustments to meet the goal of oligotrophication. This shallow reservoir is another case where recurrent eutrophication has led to reach annual mean total phosphorus concentrations (0.16 ± 0.08 mg total phosphorus/L) over the threshold of current water policies, triggering cyanobacterial growth up to undesirable levels in summer time (approximately 50,000 cells/mL). Modeling results showed that (i) after upgrading water treatment in the main tributary, (ii) applying a lanthanum-modified bentonite into the water column and sediment, and (iii) increasing reservoir water level, in-lake P concentrations and cyanobacterial abundance decreased in an 88% (below 0.01 mg total phosphorus/L) and 84% (below 6000 cells/mL), respectively in the most critical periods. However, the constraints of the proposed management strategies are associated with their costs of implementation and the time span for a stable trophic recovery of the reservoir. In that end, integrated management approaches are aimed to be adopted by water managers to reach adequate ecological status of freshwater bodies.

  3. Treatment of an actual slaughterhouse wastewater by integration of biological and advanced oxidation processes: Modeling, optimization, and cost-effectiveness analysis.

    Science.gov (United States)

    Bustillo-Lecompte, Ciro Fernando; Mehrvar, Mehrab

    2016-11-01

    Biological and advanced oxidation processes are combined to treat an actual slaughterhouse wastewater (SWW) by a sequence of an anaerobic baffled reactor, an aerobic activated sludge reactor, and a UV/H2O2 photoreactor with recycle in continuous mode at laboratory scale. In the first part of this study, quadratic modeling along with response surface methodology are used for the statistical analysis and optimization of the combined process. The effects of the influent total organic carbon (TOC) concentration, the flow rate, the pH, the inlet H2O2 concentration, and their interaction on the overall treatment efficiency, CH4 yield, and H2O2 residual in the effluent of the photoreactor are investigated. The models are validated at different operating conditions using experimental data. Maximum TOC and total nitrogen (TN) removals of 91.29 and 86.05%, respectively, maximum CH4 yield of 55.72%, and minimum H2O2 residual of 1.45% in the photoreactor effluent were found at optimal operating conditions. In the second part of this study, continuous distribution kinetics is applied to establish a mathematical model for the degradation of SWW as a function of time. The agreement between model predictions and experimental values indicates that the proposed model could describe the performance of the combined anaerobic-aerobic-UV/H2O2 processes for the treatment of SWW. In the final part of the study, the optimized combined anaerobic-aerobic-UV/H2O2 processes with recycle were evaluated using a cost-effectiveness analysis to minimize the retention time, the electrical energy consumption, and the overall incurred treatment costs required for the efficient treatment of slaughterhouse wastewater effluents. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. INTEGRATED GEOLOGIC-ENGINEERING MODEL FOR REEF AND CARBONATE SHOAL RESERVOIRS ASSOCIATED WITH PALEOHIGHS: UPPER JURASSIC SMACKOVER FORMATION, NORTHEASTERN GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2002-09-25

    The University of Alabama in cooperation with Texas A&M University, McGill University, Longleaf Energy Group, Strago Petroleum Corporation, and Paramount Petroleum Company are undertaking an integrated, interdisciplinary geoscientific and engineering research project. The project is designed to characterize and model reservoir architecture, pore systems and rock-fluid interactions at the pore to field scale in Upper Jurassic Smackover reef and carbonate shoal reservoirs associated with varying degrees of relief on pre-Mesozoic basement paleohighs in the northeastern Gulf of Mexico. The project effort includes the prediction of fluid flow in carbonate reservoirs through reservoir simulation modeling which utilizes geologic reservoir characterization and modeling and the prediction of carbonate reservoir architecture, heterogeneity and quality through seismic imaging. The primary objective of the project is to increase the profitability, producibility and efficiency of recovery of oil from existing and undiscovered Upper Jurassic fields characterized by reef and carbonate shoals associated with pre-Mesozoic basement paleohighs. The principal research effort for Year 2 of the project has been reservoir characterization, 3-D modeling and technology transfer. This effort has included six tasks: (1) the study of rockfluid interactions, (2) petrophysical and engineering characterization, (3) data integration, (4) 3-D geologic modeling, (5) 3-D reservoir simulation and (6) technology transfer. This work was scheduled for completion in Year 2. Overall, the project work is on schedule. Geoscientific reservoir characterization is essentially completed. The architecture, porosity types and heterogeneity of the reef and shoal reservoirs at Appleton and Vocation Fields have been characterized using geological and geophysical data. The study of rock-fluid interactions is near completion. Observations regarding the diagenetic processes influencing pore system development and

  5. Integrated petrophysical approach for determining reserves and reservoir characterization to optimize production of oil sands in northeastern Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, A.; Koch, J. [Weatherford Canada Partnership, Bonneyville, AB (Canada)

    2008-10-15

    This study used logging data, borehole imaging data, dipole sonic and magnetic resonance data to study a set of 6 wells in the McMurray Formation of northeastern Alberta. The data sets were used to understand the geologic settings, fluid properties, and rock properties of the area's geology as well as to more accurately estimate its reservoir and production potential. The study also incorporated data from electric, nuclear and acoustic measurements. A shaly sand analysis was used to provide key reservoir petrophysical data. Image data in the study was used to characterize the heterogeneity and permeability of the reservoir in order to optimize production. Results of the shaly sand analysis were then combined with core data and nuclear resonance data in order to determine permeability and lithology-independent porosity. Data sets were used to iteratively refine an integrated petrophysical analysis. Results of the analysis indicated that the depositional environment in which the wells were located did not match a typical fluvial-estuarine sands environment. A further interpretation of all data indicated that the wells were located in a shoreface environment. It was concluded that the integration of petrophysical measurements can enable geoscientists to more accurately characterize sub-surface environments. 3 refs., 7 figs.

  6. Characterization of the Qishn sandstone reservoir, Masila Basin-Yemen, using an integrated petrophysical and seismic structural approach

    Science.gov (United States)

    Lashin, Aref; Marta, Ebrahim Bin; Khamis, Mohamed

    2016-03-01

    This study presents an integrated petrophysical and seismic structural analysis that is carried out to evaluate the reservoir properties of Qishn sandstone as well as the entrapment style of the hydrocarbons at Sharyoof field, Sayun-Masila Basin that is located at the east central of Yemen. The reservoir rocks are dominated by clean porous and permeable sandstones zones usually intercalated with some clay stone interbeds. As identified from well logs, Qishn sandstone is classified into subunits (S1A, S1B, S1C and S2) with different reservoir characteristics and hydrocarbon potentiality. A number of qualitative and quantitative well logging analyses are used to characterize the different subunits of the Qishn reservoir and identify its hydrocarbon potentiality. Dia-porosity, M-N, Pickett, Buckles plots, petrophysical analogs and lateral distribution maps are used in the analysis. Shale volume, lithology, porosity, and fluid saturation are among the most important deduced parameters. The analysis revealed that S1A and S1C are the main hydrocarbon-bearing units. More specifically, S1A unit is the best, as it attains the most prolific hydrocarbon saturations (oil saturation "SH″ up to 65) and reservoir characteristics. An average petrophysical ranges of 4-21%, 16-23%, 11-19%, 0-65%, are detected for S1A unit, regarding shale volume, total and effective porosity, and hydrocarbon saturation, respectively. Meanwhile, S1B unit exhibits less reservoir characteristics (Vsh>30%, ϕEff<15% and SH< 15%). The lateral distribution maps revealed that most of the hydrocarbons (for S1A and S1C units) are indicated at the middle of the study area as NE-SW oriented closures. The analysis and interpretation of seismic data had clarified that the structure of study area is represented by a big middle horst bounded by a group of step-like normal faults at the extreme boundaries (faulted anticlinal-structure). In conclusion, the entrapment of the encountered hydrocarbon at Sharyoof oil

  7. Integrated microbial processes for biofuels and high value-added products: the way to improve the cost effectiveness of biofuel production.

    Science.gov (United States)

    da Silva, Teresa Lopes; Gouveia, Luísa; Reis, Alberto

    2014-02-01

    The production of microbial biofuels is currently under investigation, as they are alternative sources to fossil fuels, which are diminishing and their use has a negative impact on the environment. However, so far, biofuels derived from microbes are not economically competitive. One way to overcome this bottleneck is the use of microorganisms to transform substrates into biofuels and high value-added products, and simultaneously taking advantage of the various microbial biomass components to produce other products of interest, as an integrated process. In this way, it is possible to maximize the economic value of the whole process, with the desired reduction of the waste streams produced. It is expected that this integrated system makes the biofuel production economically sustainable and competitive in the near future. This review describes the investigation on integrated microbial processes (based on bacteria, yeast, and microalgal cultivations) that have been experimentally developed, highlighting the importance of this approach as a way to optimize microbial biofuel production process.

  8. Controlling Healthcare Costs: Just Cost Effectiveness or "Just" Cost Effectiveness?

    Science.gov (United States)

    Fleck, Leonard M

    2018-04-01

    Meeting healthcare needs is a matter of social justice. Healthcare needs are virtually limitless; however, resources, such as money, for meeting those needs, are limited. How then should we (just and caring citizens and policymakers in such a society) decide which needs must be met as a matter of justice with those limited resources? One reasonable response would be that we should use cost effectiveness as our primary criterion for making those choices. This article argues instead that cost-effectiveness considerations must be constrained by considerations of healthcare justice. The goal of this article will be to provide a preliminary account of how we might distinguish just from unjust or insufficiently just applications of cost-effectiveness analysis to some healthcare rationing problems; specifically, problems related to extraordinarily expensive targeted cancer therapies. Unconstrained compassionate appeals for resources for the medically least well-off cancer patients will be neither just nor cost effective.

  9. Cost-effectiveness of trachoma control in seven world regions.

    NARCIS (Netherlands)

    Baltussen, R.M.P.M.; Sylla, M.; Frick, K.D.; Mariotti, S.P.

    2005-01-01

    BACKGROUND/AIMS: The fight against blinding trachoma is being addressed with an integrated strategy of surgery, antibiotics, hygiene promotion, and environmental improvement-the SAFE strategy, but its cost-effectiveness is largely unknown. This paper estimates the cost effectiveness of surgery and

  10. A new approach to integrate seismic and production data in reservoir models

    Energy Technology Data Exchange (ETDEWEB)

    Ouenes, A.; Chawathe, A.; Weiss, W. [New Mexico Tech, Socorro, NM (United States)] [and others

    1997-08-01

    A great deal of effort is devoted to reducing the uncertainties in reservoir modeling. For example, seismic properties are used to improve the characterization of interwell properties by providing porosity maps constrained to seismic impedance. Another means to reduce uncertainties is to constrain the reservoir model to production data. This paper describes a new approach where the production and seismic data are simultaneously used to reduce the uncertainties. In this new approach, the primary geologic parameter that controls reservoir properties is identified. Next, the geophysical parameter that is sensitive to the dominant geologic parameter is determined. Then the geology and geophysics are linked using analytic correlations. Unfortunately, the initial guess resulted in a reservoir model that did not match the production history. Since the time required for trial and error matching of production history is exorbitant, an automatic history matching method based on a fast optimization method was used to find the correlating parameters. This new approach was illustrated with an actual field in the Williston Basin. Upscalling problems do not arise since the scale is imposed by the size of the seismic bin (66m, 219 ft) which is the size of the simulator gridblocks.

  11. 4D seismic reservoir characterization, integrated with geo-mechanical modelling

    NARCIS (Netherlands)

    Angelov, P.V.

    2009-01-01

    Hydrocarbon production induces time-lapse changes in the seismic attributes (travel time and amplitude) both at the level of the producing reservoir and in the surrounding rock. The detected time-lapse changes in the seismic are induced from the changes in the petrophysical properties of the rock,

  12. An integratedReservoir-Plant” strategy for a sustainable and efficient use of geothermal resources

    International Nuclear Information System (INIS)

    Franco, Alessandro; Vaccaro, Maurizio

    2012-01-01

    A multidisciplinary approach for the design of geothermal power plants for water dominant resources is here proposed. The importance of a strategic approach is underlined, considering all the connections between the analysis of the geothermal potential of the reservoir (geophysical exploration and geochemical analysis) with the design of the plant based on thermodynamic and energy considerations, mainly regarding ORC (Organic Rankine Cycles) power plants. This multidisciplinary approach is fundamental for the objective of a sustainable exploitation of medium to low enthalpy sources. The aim of this study is to propose the optimization and management of the global system “reservoir-power plant” as the task of geothermal projects. This approach can be pursued only in a multidisciplinary perspective in which both Engineering and Geological aspects are involved. Numerical simulation appears to be an essential interacting step. After analyzing the problems caused by an incorrect characterization of geothermal source, reinjection temperature and strategy, a method for the numerical simulation of geothermal reservoirs long-term behavior/capacity is discussed. This could be the key instrument to synthesize the strategy inputs. A numerical modeling is performed, using as reference data the history matching of a well known and completely analyzed geothermal field. -- Highlights: ► Design of Binary plants based on Organic Rankine Cycle (ORC). ► A multidisciplinary approach for the design of geothermal power plants is proposed. ► Optimization of global system Reservoir-Plant is the aim of a geothermal project. ► Numerical simulation is strategic for the design of a geothermal ORC power plant. ► A numerical model of a geothermal reservoir has been realized and simulated.

  13. Investigating leaks in dams and reservoirs

    International Nuclear Information System (INIS)

    2003-01-01

    Millions of people throughout the world depend on dams and reservoirs for electricity, water and flood protection. Dams require significant investment to build and maintain, and yet their usefulness and integrity are constantly threatened by leakage and sedimentation. Isotope hydrology techniques, combined with conventional analytical methods, are a cost-effective tool to reduce such threats. The International Atomic Energy Agency is promoting their use to protect these investments and improve management, particularly by supporting specialized teams of scientists and engineers to investigate dam leakage in African countries on request. (IAEA)

  14. An Innovative Infrastructure with a Universal Geo-spatiotemporal Data Representation Supporting Cost-effective Integration of Diverse Earth Science Data

    Science.gov (United States)

    Kuo, K. S.; Rilee, M. L.

    2017-12-01

    Existing pathways for bringing together massive, diverse Earth Science datasets for integrated analyses burden end users with data packaging and management details irrelevant to their domain goals. The major data repositories focus on archival, discovery, and dissemination of products (files) in a standardized manner. End-users must download and then adapt these files using local resources and custom methods before analysis can proceed. This reduces scientific or other domain productivity, as scarce resources and expertise must be diverted to data processing. The Spatio-Temporal Adaptive Resolution Encoding (STARE) is a unifying scheme encoding geospatial and temporal information for organizing data on scalable computing/storage resources, minimizing expensive data transfers. STARE provides a compact representation that turns set-logic functions, e.g. conditional subsetting, into integer operations, that takes into account representative spatiotemporal resolutions of the data in the datasets, which is needed for data placement alignment of geo-spatiotemporally diverse data on massive parallel resources. Automating important scientific functions (e.g. regridding) and computational functions (e.g. data placement) allows scientists to focus on domain specific questions instead of expending their expertise on data processing. While STARE is not tied to any particular computing technology, we have used STARE for visualization and the SciDB array database to analyze Earth Science data on a 28-node compute cluster. STARE's automatic data placement and coupling of geometric and array indexing allows complicated data comparisons to be realized as straightforward database operations like "join." With STARE-enabled automation, SciDB+STARE provides a database interface, reducing costly data preparation, increasing the volume and variety of integrable data, and easing result sharing. Using SciDB+STARE as part of an integrated analysis infrastructure, we demonstrate the dramatic

  15. INTEGRATED GEOLOGIC-ENGINEERING MODEL FOR REEF AND CARBONATE SHOAL RESERVOIRS ASSOCIATED WITH PALEOHIGHS: UPPER JURASSIC SMACKOVER FORMATION, NORTHEASTERN GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2001-09-14

    The University of Alabama in cooperation with Texas A&M University, McGill University, Longleaf Energy Group, Strago Petroleum Corporation, and Paramount Petroleum Company are undertaking an integrated, interdisciplinary geoscientific and engineering research project. The project is designed to characterize and model reservoir architecture, pore systems and rock-fluid interactions at the pore to field scale in Upper Jurassic Smackover reef and carbonate shoal reservoirs associated with varying degrees of relief on pre-Mesozoic basement paleohighs in the northeastern Gulf of Mexico. The project effort includes the prediction of fluid flow in carbonate reservoirs through reservoir simulation modeling which utilizes geologic reservoir characterization and modeling and the prediction of carbonate reservoir architecture, heterogeneity and quality through seismic imaging. The primary objective of the project is to increase the profitability, producibility and efficiency of recovery of oil from existing and undiscovered Upper Jurassic fields characterized by reef and carbonate shoals associated with pre-Mesozoic basement paleohighs. The principal research effort for Year 1 of the project has been reservoir description and characterization. This effort has included four tasks: (1) geoscientific reservoir characterization, (2) the study of rock-fluid interactions, (3) petrophysical and engineering characterization and (4) data integration. This work was scheduled for completion in Year 1. Overall, the project work is on schedule. Geoscientific reservoir characterization is essentially completed. The architecture, porosity types and heterogeneity of the reef and shoal reservoirs at Appleton and Vocation Fields have been characterized using geological and geophysical data. The study of rock-fluid interactions has been initiated. Observations regarding the diagenetic processes influencing pore system development and heterogeneity in these reef and shoal reservoirs have been

  16. Cost-effective improvements of a rotating platform by integration of a high-accuracy inclinometer and encoders for attitude evaluation

    International Nuclear Information System (INIS)

    Wen, Chenyang; He, Shengyang; Hu, Peida; Bu, Changgen

    2017-01-01

    Attitude heading reference systems (AHRSs) based on micro-electromechanical system (MEMS) inertial sensors are widely used because of their low cost, light weight, and low power. However, low-cost AHRSs suffer from large inertial sensor errors. Therefore, experimental performance evaluation of MEMS-based AHRSs after system implementation is necessary. High-accuracy turntables can be used to verify the performance of MEMS-based AHRSs indoors, but they are expensive and unsuitable for outdoor tests. This study developed a low-cost two-axis rotating platform for indoor and outdoor attitude determination. A high-accuracy inclinometer and encoders were integrated into the platform to improve the achievable attitude test accuracy. An attitude error compensation method was proposed to calibrate the initial attitude errors caused by the movements and misalignment angles of the platform. The proposed attitude error determination method was examined through rotating experiments, which showed that the standard deviations of the pitch and roll errors were 0.050° and 0.090°, respectively. The pitch and roll errors both decreased to 0.024° when the proposed attitude error determination method was used. This decrease validates the effectiveness of the compensation method. Experimental results demonstrated that the integration of the inclinometer and encoders improved the performance of the low-cost, two-axis, rotating platform in terms of attitude accuracy. (paper)

  17. Optimising design and cost-effective implementation of future pan-African dietary studies: a review of existing economic integration and nutritional indicators for scenario-based profiling and clustering of countries.

    Science.gov (United States)

    Aglago, Elom K; Landais, Edwige; Zotor, Francis; Nicolas, Genevieve; Gunter, Marc J; Amuna, Paul; Slimani, Nadia

    2018-02-01

    Most of the African countries are undergoing a complex nutrition and epidemiologic transition associated with a rapid increase in the prevalence of diverse non-communicable diseases. Despite this alarming situation, the still limited and fragmented resources available in Africa impede the implementation of effective action plans to tackle the current and projected diet-disease burden. In order to address these common needs and challenges, the African Union is increasingly supporting continental approaches and strategies as reflected in the launching of the Agenda 2063 and the African regional nutrition strategy 2015-2025, among others. To assure the successful implementation of pan-African nutritional and health initiatives, cost-effective approaches considering similarities/disparities in economy, regional integration, development and nutritional aspects between countries are needed. In the absence of pre-existing models, we reviewed regional economic integration and nutritional indicators (n 13) available in international organisations databases or governmental agencies websites, for fifty-two African countries. These indicators were used to map the countries according to common languages (e.g. Arabic, English, French, Portuguese), development status (e.g. human development index), malnutrition status (e.g. obesity) and diet (e.g. staples predominantly based on either cereals or tubers). The review of the indicators showed that there exist similarities between African countries that can be exploited to benefit the continent with cross-national experiences in order to avoid duplication of efforts in the implementation of future pan-African health studies. In addition, including present and future nutrition surveillance programmes in Africa into national statistical systems might be cost-effective and sustainable in the longer term.

  18. An Innovative Infrastructure with a Universal Geo-Spatiotemporal Data Representation Supporting Cost-Effective Integration of Diverse Earth Science Data

    Science.gov (United States)

    Rilee, Michael Lee; Kuo, Kwo-Sen

    2017-01-01

    The SpatioTemporal Adaptive Resolution Encoding (STARE) is a unifying scheme encoding geospatial and temporal information for organizing data on scalable computing/storage resources, minimizing expensive data transfers. STARE provides a compact representation that turns set-logic functions into integer operations, e.g. conditional sub-setting, taking into account representative spatiotemporal resolutions of the data in the datasets. STARE geo-spatiotemporally aligns data placements of diverse data on massive parallel resources to maximize performance. Automating important scientific functions (e.g. regridding) and computational functions (e.g. data placement) allows scientists to focus on domain-specific questions instead of expending their efforts and expertise on data processing. With STARE-enabled automation, SciDB (Scientific Database) plus STARE provides a database interface, reducing costly data preparation, increasing the volume and variety of interoperable data, and easing result sharing. Using SciDB plus STARE as part of an integrated analysis infrastructure dramatically eases combining diametrically different datasets.

  19. Integrated Modeling and Carbonate Reservoir Analysis, Upper Jurassic Smackover Formation, Fishpond Field, Southwest Alabama

    Science.gov (United States)

    Owen, Alexander Emory

    This field case study focuses on Upper Jurassic (Oxfordian) Smackover hydrocarbon reservoir characterization, modeling and evaluation at Fishpond Field, Escambia County, Alabama, eastern Gulf Coastal Plain of North America. The field is located in the Conecuh Embayment area, south of the Little Cedar Creek Field in Conecuh County and east of Appleton Field in Escambia County. In the Conecuh Embayment, Smackover microbial buildups commonly developed on Paleozoic basement paleohighs in an inner to middle carbonate ramp setting. The microbial and associated facies identified in Fishpond Field are: (F-1) peloidal wackestone, (F-2) peloidal packstone, (F-3) peloidal grainstone, (F-4) peloidal grainstone/packstone, (F-5) microbially-influenced wackestone, (F-6) microbially-influenced packstone, (F-7) microbial boundstone, (F-8) oolitic grainstone, (F-9) shale, and (F-10) dolomitized wackestone/packstone. The Smackover section consists of an alternation of carbonate facies, including F-1 through F-8. The repetitive vertical trend in facies indicates variations in depositional conditions in the area as a result of changes in water depth, energy conditions, salinity, and/or water chemistry due to temporal variations or changes in relative sea level. Accommodation for sediment accumulation also was produced by a change in base level due to differential movement of basement rocks as a result of faulting and/or subsidence due to burial compaction and extension. These changes in base level contributed to the development of a microbial buildup that ranges between 130-165 ft in thickness. The Fishpond Field carbonate reservoir includes a lower microbial buildup interval, a middle grainstone/packstone interval and an upper microbial buildup interval. The Fishpond Field has sedimentary and petroleum system characteristics similar to the neighboring Appleton and Little Cedar Creek Fields, but also has distinct differences from these Smackover fields. The characteristics of the

  20. Cost effectiveness analysis in radiopharmacy

    International Nuclear Information System (INIS)

    Carpentier, N.; Verbeke, S.; Ducloux, T.

    1999-01-01

    Objective: to evaluate the cost effectiveness of radiopharmaceuticals and their quality control. Materials and methods: this retrospective study was made in the Nuclear Medicine Department of the University Hospital of Limoges. Radiopharmaceutical costs were obtained with adding the price of the radiotracer, the materials, the equipments, the labour, the running expenses and the radioisotope. The costs of quality control were obtained with adding the price of labour, materials, equipments, running expenses and the cost of the quality control of 99m Tc eluate. Results: during 1998, 2106 radiopharmaceuticals were prepared in the Nuclear Medicine Department. The mean cost effectiveness of radiopharmaceutical was 1430 francs (846 to 4260). The mean cost effectiveness of quality control was 163 francs (84 to 343). The rise of the radiopharmaceutical cost induced by quality control was 11%. Conclusion: the technical methodology of quality control must be mastered to optimize the cost of this operation. (author)

  1. Integrating top-down and bottom-up approaches to design a cost-effective and equitable programme of measures for adaptation of a river basin to global change

    Science.gov (United States)

    Girard, Corentin; Rinaudo, Jean-Daniel; Pulido-Velazquez, Manuel

    2016-04-01

    Adaptation to the multiple facets of global change challenges the conventional means of sustainably planning and managing water resources at the river basin scale. Numerous demand or supply management options are available, from which adaptation measures need to be selected in a context of high uncertainty of future conditions. Given the interdependency of water users, agreements need to be found at the local level to implement the most effective adaptation measures. Therefore, this work develops an approach combining economics and water resources engineering to select a cost-effective programme of adaptation measures in the context of climate change uncertainty, and to define an equitable allocation of the cost of the adaptation plan between the stakeholders involved. A framework is developed to integrate inputs from the two main approaches commonly used to plan for adaptation. The first, referred to as "top-down", consists of a modelling chain going from global greenhouse gases emission scenarios to local hydrological models used to assess the impact of climate change on water resources. Conversely, the second approach, called "bottom-up", starts from assessing vulnerability at the local level to then identify adaptation measures used to face an uncertain future. The methodological framework presented in this contribution relies on a combination of these two approaches to support the selection of adaptation measures at the local level. Outcomes from these two approaches are integrated to select a cost-effective combination of adaptation measures through a least-cost optimization model developed at the river basin scale. The performances of a programme of measures are assessed under different climate projections to identify cost-effective and least-regret adaptation measures. The issue of allocating the cost of the adaptation plan is considered through two complementary perspectives. The outcome of a negotiation process between the stakeholders is modelled through

  2. Know thy reservoir : multi-disciplinary shale gas solution integrates cased hole evaluation interpretation and stimulation

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.

    2009-11-15

    This article discussed Schlumberger's efforts in making shale gas a priority. Shale gas plays require maximum reservoir exposure to be economic. The exploitation of shale gas has been solved through the use of long horizontal wells that are fractured in multiple zones along their length. Companies have invested heavily into research to find increasingly novel ways to reduce costs and extract more molecules of gas from the ultra-low permeability rock. The tools and techniques that Schlumberger has developed for well stimulation and completion were described. Schlumberger was extremely focused on improving its ability to understand the Horn River reservoir and improve completion practices. Openhole logging was discussed as an option. Schlumberger in conjunction with its in-house data and consulting services group, also devised a method to log a lateral well after it had been cased, cemented, and the rig had been released. It was concluded that using such instruments as spectroscopy logging, epithermal neutron porosity logging and multidimensional shear sonic logging tools, Schlumberger could provide all the necessary measurements post-casing. 2 refs., 3 figs.

  3. Application of Nemerow Index Method and Integrated Water Quality Index Method in Water Quality Assessment of Zhangze Reservoir

    Science.gov (United States)

    Zhang, Qian; Feng, Minquan; Hao, Xiaoyan

    2018-03-01

    [Objective] Based on the water quality historical data from the Zhangze Reservoir from the last five years, the water quality was assessed by the integrated water quality identification index method and the Nemerow pollution index method. The results of different evaluation methods were analyzed and compared and the characteristics of each method were identified.[Methods] The suitability of the water quality assessment methods were compared and analyzed, based on these results.[Results] the water quality tended to decrease over time with 2016 being the year with the worst water quality. The sections with the worst water quality were the southern and northern sections.[Conclusion] The results produced by the traditional Nemerow index method fluctuated greatly in each section of water quality monitoring and therefore could not effectively reveal the trend of water quality at each section. The combination of qualitative and quantitative measures of the comprehensive pollution index identification method meant it could evaluate the degree of water pollution as well as determine that the river water was black and odorous. However, the evaluation results showed that the water pollution was relatively low.The results from the improved Nemerow index evaluation were better as the single indicators and evaluation results are in strong agreement; therefore the method is able to objectively reflect the water quality of each water quality monitoring section and is more suitable for the water quality evaluation of the reservoir.

  4. An Integrated Approach to Characterizing Bypassed Oil in Heterogeneous and Fractured Reservoirs Using Partitioning Tracers

    Energy Technology Data Exchange (ETDEWEB)

    Akhil Datta-Gupta

    2006-12-31

    We explore the use of efficient streamline-based simulation approaches for modeling partitioning interwell tracer tests in hydrocarbon reservoirs. Specifically, we utilize the unique features of streamline models to develop an efficient approach for interpretation and history matching of field tracer response. A critical aspect here is the underdetermined and highly ill-posed nature of the associated inverse problems. We have investigated the relative merits of the traditional history matching ('amplitude inversion') and a novel travel time inversion in terms of robustness of the method and convergence behavior of the solution. We show that the traditional amplitude inversion is orders of magnitude more non-linear and the solution here is likely to get trapped in local minimum, leading to inadequate history match. The proposed travel time inversion is shown to be extremely efficient and robust for practical field applications. The streamline approach is generalized to model water injection in naturally fractured reservoirs through the use of a dual media approach. The fractures and matrix are treated as separate continua that are connected through a transfer function, as in conventional finite difference simulators for modeling fractured systems. A detailed comparison with a commercial finite difference simulator shows very good agreement. Furthermore, an examination of the scaling behavior of the computation time indicates that the streamline approach is likely to result in significant savings for large-scale field applications. We also propose a novel approach to history matching finite-difference models that combines the advantage of the streamline models with the versatility of finite-difference simulation. In our approach, we utilize the streamline-derived sensitivities to facilitate history matching during finite-difference simulation. The use of finite-difference model allows us to account for detailed process physics and compressibility effects

  5. INTEGRATED GEOLOGIC-ENGINEERING MODEL FOR REEF AND CARBONATE SHOAL RESERVOIRS ASSOCIATED WITH PALEOHIGHS: UPPER JURASSIC SMACKOVER FORMATION, NORTHEASTERN GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2003-09-25

    The University of Alabama in cooperation with Texas A&M University, McGill University, Longleaf Energy Group, Strago Petroleum Corporation, and Paramount Petroleum Company are undertaking an integrated, interdisciplinary geoscientific and engineering research project. The project is designed to characterize and model reservoir architecture, pore systems and rock-fluid interactions at the pore to field scale in Upper Jurassic Smackover reef and carbonate shoal reservoirs associated with varying degrees of relief on pre-Mesozoic basement paleohighs in the northeastern Gulf of Mexico. The project effort includes the prediction of fluid flow in carbonate reservoirs through reservoir simulation modeling that utilizes geologic reservoir characterization and modeling and the prediction of carbonate reservoir architecture, heterogeneity and quality through seismic imaging. The primary objective of the project is to increase the profitability, producibility and efficiency of recovery of oil from existing and undiscovered Upper Jurassic fields characterized by reef and carbonate shoals associated with pre-Mesozoic basement paleohighs. The principal research effort for Year 3 of the project has been reservoir characterization, 3-D modeling, testing of the geologic-engineering model, and technology transfer. This effort has included six tasks: (1) the study of seismic attributes, (2) petrophysical characterization, (3) data integration, (4) the building of the geologic-engineering model, (5) the testing of the geologic-engineering model and (6) technology transfer. This work was scheduled for completion in Year 3. Progress on the project is as follows: geoscientific reservoir characterization is completed. The architecture, porosity types and heterogeneity of the reef and shoal reservoirs at Appleton and Vocation Fields have been characterized using geological and geophysical data. The study of rock-fluid interactions has been completed. Observations regarding the diagenetic

  6. Noble gas and hydrocarbon tracers in multiphase unconventional hydrocarbon systems: Toward integrated advanced reservoir simulators

    Science.gov (United States)

    Darrah, T.; Moortgat, J.; Poreda, R. J.; Muehlenbachs, K.; Whyte, C. J.

    2015-12-01

    Although hydrocarbon production from unconventional energy resources has increased dramatically in the last decade, total unconventional oil and gas recovery from black shales is still less than 25% and 9% of the totals in place, respectively. Further, the majority of increased hydrocarbon production results from increasing the lengths of laterals, the number of hydraulic fracturing stages, and the volume of consumptive water usage. These strategies all reduce the economic efficiency of hydrocarbon extraction. The poor recovery statistics result from an insufficient understanding of some of the key physical processes in complex, organic-rich, low porosity formations (e.g., phase behavior, fluid-rock interactions, and flow mechanisms at nano-scale confinement and the role of natural fractures and faults as conduits for flow). Noble gases and other hydrocarbon tracers are capably of recording subsurface fluid-rock interactions on a variety of geological scales (micro-, meso-, to macro-scale) and provide analogs for the movement of hydrocarbons in the subsurface. As such geochemical data enrich the input for the numerical modeling of multi-phase (e.g., oil, gas, and brine) fluid flow in highly heterogeneous, low permeability formations Herein we will present a combination of noble gas (He, Ne, Ar, Kr, and Xe abundances and isotope ratios) and molecular and isotopic hydrocarbon data from a geographically and geologically diverse set of unconventional hydrocarbon reservoirs in North America. Specifically, we will include data from the Marcellus, Utica, Barnett, Eagle Ford, formations and the Illinois basin. Our presentation will include geochemical and geological interpretation and our perspective on the first steps toward building an advanced reservoir simulator for tracer transport in multicomponent multiphase compositional flow (presented separately, in Moortgat et al., 2015).

  7. Enhanced heavy oil recovery for carbonate reservoirs integrating cross-well seismic–a synthetic Wafra case study

    KAUST Repository

    Katterbauer, Klemens; Arango, Santiago; Sun, Shuyu; Hoteit, Ibrahim

    2015-01-01

    reservoir history matching framework using ensemble based techniques incorporating seismic data for enhancing reservoir characterization and improving history matches. Examining the performance on a synthetic field study of the Wafra field, we could

  8. A mixed methods protocol to evaluate the effect and cost-effectiveness of an Integrated electronic Diagnosis Approach (IeDA) for the management of childhood illnesses at primary health facilities in Burkina Faso.

    Science.gov (United States)

    Blanchet, Karl; Lewis, James J; Pozo-Martin, Francisco; Satouro, Arsene; Somda, Serge; Ilboudo, Patrick; Sarrassat, Sophie; Cousens, Simon

    2016-08-04

    Burkina Faso introduced the Integrated Management of Childhood Illnesses (IMCI) strategy in 2003. However, an evaluation conducted in 2013 found that only 28 % of children were assessed for three danger signs as recommended by IMCI, and only 15 % of children were correctly classified. About 30 % of children were correctly prescribed with an antibiotic for suspected pneumonia or oral rehydration salts (ORS) for diarrhoea, and 40 % were correctly referred. Recent advances in information and communication technologies (ICT) and use of electronic clinical protocols hold the potential to transform healthcare delivery in low-income countries. However, no evidence is available on the effect of ICT on adherence to IMCI. This paper describes the research protocol of a mixed methods study that aims to measure the effect of the Integrated electronic Diagnosis Approach innovation (an electronic IMCI protocol provided to nurses) in two regions of Burkina Faso. The study combines a stepped-wedge trial, a realistic evaluation and an economic study in order to capture the effect of the innovation after its introduction on the level of adherence, cost and acceptability. The main challenge is to interconnect the three substudies. In integrating outcome, process and cost data, we focus on three key questions: (i) How does the effectiveness and the cost of the intervention vary by type of health worker and type of health centre? (ii) What is the impact of changes in the content, coverage and quality of the IeDA intervention on adherence and cost-effectiveness? (iii) What mechanisms of change (including costs) might explain the relationship between the IeDA intervention and adherence? Clinicaltrials.gov, NCT02341469 .

  9. Inspections - a cost effective approach

    International Nuclear Information System (INIS)

    Joseph, C.

    1981-01-01

    This paper describes a cost effective approach for inspections of Computerized Nuclear Materials Control and Accounting Systems (CNMCAS). Highlighted is the capability to conduct an inspection program via portable telephone terminals from off-site locations. The program can be applied to various materials management functions including materials control, quality assurance, and materials accounting. The system is designed to facilitate inspections by both external and internal groups

  10. Transport of reservoir fines

    DEFF Research Database (Denmark)

    Yuan, Hao; Shapiro, Alexander; Stenby, Erling Halfdan

    Modeling transport of reservoir fines is of great importance for evaluating the damage of production wells and infectivity decline. The conventional methodology accounts for neither the formation heterogeneity around the wells nor the reservoir fines’ heterogeneity. We have developed an integral...... dispersion equation in modeling the transport and the deposition of reservoir fines. It successfully predicts the unsymmetrical concentration profiles and the hyperexponential deposition in experiments....

  11. Maximizing Storage Rate and Capacity and Insuring the Environmental Integrity of Carbon Dioxide Sequestration in Geological Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    L.A. Davis; A.L. Graham; H.W. Parker; J.R. Abbott; M.S. Ingber; A.A. Mammoli; L.A. Mondy; Quanxin Guo; Ahmed Abou-Sayed

    2005-12-07

    Maximizing Storage Rate and Capacity and Insuring the Environmental Integrity of Carbon Dioxide Sequestration in Geological Formations The U.S. and other countries may enter into an agreement that will require a significant reduction in CO2 emissions in the medium to long term. In order to achieve such goals without drastic reductions in fossil fuel usage, CO2 must be removed from the atmosphere and be stored in acceptable reservoirs. The research outlined in this proposal deals with developing a methodology to determine the suitability of a particular geologic formation for the long-term storage of CO2 and technologies for the economical transfer and storage of CO2 in these formations. A novel well-logging technique using nuclear-magnetic resonance (NMR) will be developed to characterize the geologic formation including the integrity and quality of the reservoir seal (cap rock). Well-logging using NMR does not require coring, and hence, can be performed much more quickly and efficiently. The key element in the economical transfer and storage of the CO2 is hydraulic fracturing the formation to achieve greater lateral spreads and higher throughputs of CO2. Transport, compression, and drilling represent the main costs in CO2 sequestration. The combination of well-logging and hydraulic fracturing has the potential of minimizing these costs. It is possible through hydraulic fracturing to reduce the number of injection wells by an order of magnitude. Many issues will be addressed as part of the proposed research to maximize the storage rate and capacity and insure the environmental integrity of CO2 sequestration in geological formations. First, correlations between formation properties and NMR relaxation times will be firmly established. A detailed experimental program will be conducted to determine these correlations. Second, improved hydraulic fracturing models will be developed which are suitable for CO2 sequestration as opposed to enhanced oil recovery (EOR

  12. Well Integrity for Natural Gas Storage in Depleted Reservoirs and Aquifers

    Energy Technology Data Exchange (ETDEWEB)

    Freifeld, Barry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oldenburg, Curtis [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pan, Lehua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Perfect, Scott [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morris, Joseph [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); White, Joshua [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bauer, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Blankenship, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roberts, Barry [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bromhal, Grant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Glosser, Deborah [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Wyatt, Douglas [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Rose, Kelly [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2016-09-01

    The 2015-2016 Aliso Canyon/Porter Ranch natural gas well blowout emitted approximately 100,000 tonnes of natural gas (mostly methane, CH4) over four months. The blowout impacted thousands of nearby residents, who were displaced from their homes. The high visibility of the event has led to increased scrutiny of the safety of natural gas storage at the Aliso Canyon facility, as well as broader concern for natural gas storage integrity throughout the country. This report presents the findings of the DOE National Laboratories Well Integrity Work Group efforts in the four tasks. In addition to documenting the work of the Work Group, this report presents high priority recommendations to improve well integrity and reduce the likelihood and consequences of subsurface natural gas leaks.

  13. Efficient integration of stiff kinetics with phase change detection for reactive reservoir processes

    DEFF Research Database (Denmark)

    Kristensen, Morten Rode; Gerritsen, Margot G.; Thomsen, Per Grove

    2007-01-01

    We propose the use of implicit one-step Explicit Singly Diagonal Implicit Runge-Kutta (ESDIRK) methods for integration of the stiff kinetics in reactive, compositional and thermal processes that are solved using operator-splitting type approaches. To facilitate the algorithmic development we...

  14. INTEGRATED GEOLOGIC-ENGINEERING MODEL FOR REEF AND CARBONATE SHOAL RESERVOIRS ASSOCIATED WITH PALEOHIGHS: UPPER JURASSIC SMACKOVER FORMATION, NORTHEASTERN GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Ernest A. Mancini

    2004-02-25

    The University of Alabama, in cooperation with Texas A&M University, McGill University, Longleaf Energy Group, Strago Petroleum Corporation, and Paramount Petroleum Company, has undertaken an integrated, interdisciplinary geoscientific and engineering research project. The project is designed to characterize and model reservoir architecture, pore systems and rock-fluid interactions at the pore to field scale in Upper Jurassic Smackover reef and carbonate shoal reservoirs associated with varying degrees of relief on pre-Mesozoic basement paleohighs in the northeastern Gulf of Mexico. The project effort includes the prediction of fluid flow in carbonate reservoirs through reservoir simulation modeling which utilizes geologic reservoir characterization and modeling and the prediction of carbonate reservoir architecture, heterogeneity and quality through seismic imaging. The primary goal of the project is to increase the profitability, producibility and efficiency of recovery of oil from existing and undiscovered Upper Jurassic fields characterized by reef and carbonate shoals associated with pre-Mesozoic basement paleohighs. Geoscientific reservoir property, geophysical seismic attribute, petrophysical property, and engineering property characterization has shown that reef (thrombolite) and shoal reservoir lithofacies developed on the flanks of high-relief crystalline basement paleohighs (Vocation Field example) and on the crest and flanks of low-relief crystalline basement paleohighs (Appleton Field example). The reef thrombolite lithofacies have higher reservoir quality than the shoal lithofacies due to overall higher permeabilities and greater interconnectivity. Thrombolite dolostone flow units, which are dominated by dolomite intercrystalline and vuggy pores, are characterized by a pore system comprised of a higher percentage of large-sized pores and larger pore throats. Rock-fluid interactions (diagenesis) studies have shown that although the primary control on

  15. An integrated study of the Grayburg/San Andres reservoir, Foster and south Cowden fields, Ector County, Texas. Quarterly report, January 1--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Trentham, R.C.; Weinbrandt, R.; Reeves, J.J.

    1996-06-17

    The principal objective of this research is to demonstrate in the field that 3D seismic data can be used to aid in identifying porosity zones, permeability barriers and thief zones and thereby improve waterflood design. Geologic and engineering data will be integrated with the geophysical data to result in a detailed reservoir characterization. Reservoir simulation will then be used to determine infill drilling potential and the optimum waterflood design for the project area. This design will be implemented and the success of the waterflood evaluated.

  16. Constructing development and integrated coastal zone management in the conditions of the landslide slopes of Cheboksary water reservoir (Volga River)

    Science.gov (United States)

    Nikonorova, I. V.

    2018-01-01

    Uncontrolled construction and insufficient accounting of engineering-geological and hydro-geological conditions of the coastal zone, intensified technogenic impact on sloping surfaces and active urbanization led to the emergence of serious problems and emergency situations on the coasts of many Volga reservoirs, including the Cheboksary reservoir, within Cheboksary urban district and adjacent territories of Chuvashia. This article is devoted to substantiation of the possibility of rational construction development of landslide slopes of the Cheboksary water reservoir.

  17. Well Integrity for Natural Gas Storage in Depleted Reservoirs and Aquifers

    Energy Technology Data Exchange (ETDEWEB)

    Freifeld, Barry M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oldenburg, Curtis M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pan, Lehua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Perfect, Scott [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morris, Joseph [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); White, Joshua [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bauer, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Blankenship, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roberts, Barry [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bromhal, Grant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Glosser, Deborah [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Wyatt, Douglas [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Rose, Kelly [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2016-09-02

    Introduction Motivation The 2015-2016 Aliso Canyon/Porter Ranch natural gas well blowout emitted approximately 100,000 tonnes of natural gas (mostly methane, CH4) over four months. The blowout impacted thousands of nearby residents, who were displaced from their homes. The high visibility of the event has led to increased scrutiny of the safety of natural gas storage at the Aliso Canyon facility, as well as broader concern for natural gas storage integrity throughout the country. Federal Review of Well Integrity In April of 2016, the U.S. Department of Energy (DOE), in conjunction with the U.S. Department of Transportation (DOT) through the Pipeline and Hazardous Materials Safety Administration (PHMSA), announced the formation of a new Interagency Task Force on Natural Gas Storage Safety. The Task Force enlisted a group of scientists and engineers at the DOE National Laboratories to review the state of well integrity in natural gas storage in the U.S. The overarching objective of the review is to gather, analyze, catalogue, and disseminate information and findings that can lead to improved natural gas storage safety and security and thus reduce the risk of future events. The “Protecting our Infrastructure of Pipelines and Enhancing Safety Act of 2016’’ or the ‘‘PIPES Act of 2016,’’which was signed into law on June 22, 2016, created an Aliso Canyon Natural Gas Leak Task Force led by the Secretary of Energy and consisting of representatives from the DOT, Environmental Protection Agency (EPA), Department of Health and Human Services, Federal Energy Regulatory Commission (FERC), Department of Commerce and the Department of Interior. The Task Force was asked to perform an analysis of the Aliso Canyon event and make recommendations on preventing similar incidents in the future. The PIPES Act also required that DOT/PHMSA promulgate minimum safety standards for underground storage that would take effect within two years. Background on the DOE

  18. Prediction of total organic carbon content in shale reservoir based on a new integrated hybrid neural network and conventional well logging curves

    Science.gov (United States)

    Zhu, Linqi; Zhang, Chong; Zhang, Chaomo; Wei, Yang; Zhou, Xueqing; Cheng, Yuan; Huang, Yuyang; Zhang, Le

    2018-06-01

    There is increasing interest in shale gas reservoirs due to their abundant reserves. As a key evaluation criterion, the total organic carbon content (TOC) of the reservoirs can reflect its hydrocarbon generation potential. The existing TOC calculation model is not very accurate and there is still the possibility for improvement. In this paper, an integrated hybrid neural network (IHNN) model is proposed for predicting the TOC. This is based on the fact that the TOC information on the low TOC reservoir, where the TOC is easy to evaluate, comes from a prediction problem, which is the inherent problem of the existing algorithm. By comparing the prediction models established in 132 rock samples in the shale gas reservoir within the Jiaoshiba area, it can be seen that the accuracy of the proposed IHNN model is much higher than that of the other prediction models. The mean square error of the samples, which were not joined to the established models, was reduced from 0.586 to 0.442. The results show that TOC prediction is easier after logging prediction has been improved. Furthermore, this paper puts forward the next research direction of the prediction model. The IHNN algorithm can help evaluate the TOC of a shale gas reservoir.

  19. Application of integrated petroleum reservoir study for intervention and field development program in western onshore field, India

    Directory of Open Access Journals (Sweden)

    Vijai Kumar Baskaran

    2017-12-01

    Full Text Available In this research, an integrated reservoir study is performed in the J#Field (J-Oil Field of western onshore, India to evaluate its additional reserves expectations and implement field developments plan using waterflood pilot program. The target strata includes two formations of Paleogene, which is about 3600 ft, namely G#Fm (G-Formation of the Eocene and T#Fm (T-Formation of Oligocene, subdivided into 11 zones. Based on these results, an attempt was made to construct of an optimization plan to exploit it, taking into account that the field is producing since 1947, with a cumulative production of 183.5 MMbbl and an overall recovery factor of 28% until January 2016. On the basis of the potential evaluation and geological modeling, blocks J48 and J45 were simulated, and the remaining oil distribution characteristics in two blocks were studied after history match. The work includes the stratigraphic studies, seismic study, logging interpretation, sedimentary facies modeling, three dimensional geological modeling, simulations for waterflooding, and future field development plans.

  20. An Integrated Approach to Characterizing Bypassed Oil in Heterogeneous and Fractured Reservoirs Using Partitioning Tracers. Annual Report

    International Nuclear Information System (INIS)

    Akhil Datta-Gupta

    2006-01-01

    This report presents an efficient trajectory-based approach to integrate transient pressure data into high-resolution reservoir and aquifer models. The method involves alternating travel time and peak amplitude matching of pressure response using inverse modeling and is particularly well-suited for high resolution subsurface characterization using hydraulic tomography or pressure interference tests. Compared to travel time inversion only, our proposed approach results in a significantly improved match of the pressure response at the wells and also better estimates of subsurface properties. This is accomplished with very little increase in computational cost. Utilizing the concept of a ''diffusive'' time of flight derived from an asymptotic solution of the diffusivity equation, we develop analytical approaches to estimate the sensitivities for travel time and peak amplitude of pressure response to subsurface properties. The sensitivities are then used in an iterative least-squared minimization to match the pressure data. We illustrate our approach using synthetic and field examples. In the field application at a fractured limestone formation, the predominant fracture patterns emerging from the inversion are shown to be consistent with independent geophysical experiments and borehole data

  1. Integrated Outcrop and Subsurface Studies of the Interwell Environment of Carbonate Reservoirs: Clear Fork (Leonaradian Age) Reservoirs, West Texas and New Mexico, Semi-Annual; SEMIANNUAL

    International Nuclear Information System (INIS)

    Ruppel, Stephen C.; Jennings, James W.; Laubach, Stephen E.

    2001-01-01

    Outcrop studies include stratigraphic and petrophysical analysis. Analysis of the detailed sequence- and cycle-scale architecture of the Clear Fork reservoir-equivalent outcrops in Apache Canyon is nearly complete. This work reveals two high-frequency transgressive-regressive sequences (HFS) in the lower Clear Fork composite depositional sequence and three HFS in the basal middle Clear Fork composite depositional sequence. A 1,800-ft transect of 1-inch-diameter samples was collected from one cycle at the Apache Canyon outcrop. The transect was sampled with 5-ft spacing, but there were some gaps due to cover and cliff, resulting in 181 samples. Permeability, porosity, and grain density were measured, and the spatial statistics are being analyzed geostatistically

  2. Cost-effectiveness analysis of the national implementation of integrated community case management and community-based health planning and services in Ghana for the treatment of malaria, diarrhoea and pneumonia

    DEFF Research Database (Denmark)

    Escribano Ferrer, Blanca; Hansen, Kristian Schultz; Gyapong, Margaret

    2017-01-01

    was to assess the cost-effectiveness of these strategies under programme conditions. Methods: A cost-effectiveness analysis was conducted. Appropriate diagnosis and treatment given was the effectiveness measure used. Appropriate diagnosis and treatment data was obtained from a household survey conducted 2 and 8...... years after implementation of iCCM in the Volta and Northern Regions of Ghana, respectively. The study population was carers of children under-5 years who had fever, diarrhoea and/or cough in the last 2 weeks prior to the interview. Costs data was obtained mainly from the National Malaria Control...... Programme (NMCP), the Ministry of Health, CHPS compounds and from a household survey. Results: Appropriate diagnosis and treatment of malaria, diarrhoea and suspected pneumonia was more cost-effective under the iCCM than under CHPS in the Volta Region, even after adjusting for different discount rates...

  3. Cost-effective implementation of intelligent systems

    Science.gov (United States)

    Lum, Henry, Jr.; Heer, Ewald

    1990-01-01

    Significant advances have occurred during the last decade in knowledge-based engineering research and knowledge-based system (KBS) demonstrations and evaluations using integrated intelligent system technologies. Performance and simulation data obtained to date in real-time operational environments suggest that cost-effective utilization of intelligent system technologies can be realized. In this paper the rationale and potential benefits for typical examples of application projects that demonstrate an increase in productivity through the use of intelligent system technologies are discussed. These demonstration projects have provided an insight into additional technology needs and cultural barriers which are currently impeding the transition of the technology into operational environments. Proposed methods which addresses technology evolution and implementation are also discussed.

  4. Integrating a Typhoon Event Database with an Optimal Flood Operation Model on the Real-Time Flood Control of the Tseng-Wen Reservoir

    Science.gov (United States)

    Chen, Y. W.; Chang, L. C.

    2012-04-01

    Typhoons which normally bring a great amount of precipitation are the primary natural hazard in Taiwan during flooding season. Because the plentiful rainfall quantities brought by typhoons are normally stored for the usage of the next draught period, the determination of release strategies for flood operation of reservoirs which is required to simultaneously consider not only the impact of reservoir safety and the flooding damage in plain area but also for the water resource stored in the reservoir after typhoon becomes important. This study proposes a two-steps study process. First, this study develop an optimal flood operation model (OFOM) for the planning of flood control and also applies the OFOM on Tseng-wun reservoir and the downstream plain related to the reservoir. Second, integrating a typhoon event database with the OFOM mentioned above makes the proposed planning model have ability to deal with a real-time flood control problem and names as real-time flood operation model (RTFOM). Three conditions are considered in the proposed models, OFOM and RTFOM, include the safety of the reservoir itself, the reservoir storage after typhoons and the impact of flooding in the plain area. Besides, the flood operation guideline announced by government is also considered in the proposed models. The these conditions and the guideline can be formed as an optimization problem which is solved by the genetic algorithm (GA) in this study. Furthermore, a distributed runoff model, kinematic-wave geomorphic instantaneous unit hydrograph (KW-GIUH), and a river flow simulation model, HEC-RAS, are used to simulate the river water level of Tseng-wun basin in the plain area and the simulated level is shown as an index of the impact of flooding. Because the simulated levels are required to re-calculate iteratively in the optimization model, applying a recursive artificial neural network (recursive ANN) instead of the HEC-RAS model can significantly reduce the computational burden of

  5. Reviving Abandoned Reservoirs with High-Pressure Air Injection: Application in a Fractured and Karsted Dolomite Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Robert Loucks; Stephen C. Ruppel; Dembla Dhiraj; Julia Gale; Jon Holder; Jeff Kane; Jon Olson; John A. Jackson; Katherine G. Jackson

    2006-09-30

    Despite declining production rates, existing reservoirs in the United States contain vast volumes of remaining oil that is not being effectively recovered. This oil resource constitutes a huge target for the development and application of modern, cost-effective technologies for producing oil. Chief among the barriers to the recovery of this oil are the high costs of designing and implementing conventional advanced recovery technologies in these mature, in many cases pressure-depleted, reservoirs. An additional, increasingly significant barrier is the lack of vital technical expertise necessary for the application of these technologies. This lack of expertise is especially notable among the small operators and independents that operate many of these mature, yet oil-rich, reservoirs. We addressed these barriers to more effective oil recovery by developing, testing, applying, and documenting an innovative technology that can be used by even the smallest operator to significantly increase the flow of oil from mature U.S. reservoirs. The Bureau of Economic Geology and Goldrus Producing Company assembled a multidisciplinary team of geoscientists and engineers to evaluate the applicability of high-pressure air injection (HPAI) in revitalizing a nearly abandoned carbonate reservoir in the Permian Basin of West Texas. The Permian Basin, the largest oil-bearing basin in North America, contains more than 70 billion barrels of remaining oil in place and is an ideal venue to validate this technology. We have demonstrated the potential of HPAI for oil-recovery improvement in preliminary laboratory tests and a reservoir pilot project. To more completely test the technology, this project emphasized detailed characterization of reservoir properties, which were integrated to access the effectiveness and economics of HPAI. The characterization phase of the project utilized geoscientists and petroleum engineers from the Bureau of Economic Geology and the Department of Petroleum

  6. Integrating Geographical Information Systems, Fuzzy Logic and Analytical Hierarchy Process in Modelling Optimum Sites for Locating Water Reservoirs. A Case Study of the Debub District in Eritrea

    Directory of Open Access Journals (Sweden)

    Rodney G. Tsiko

    2011-03-01

    Full Text Available The aim of this study was to model water reservoir site selection for a real world application in the administrative district of Debub, Eritrea. This is a region were scarcity of water is a fundamental problem. Erratic rainfall, drought and unfavourable hydro-geological characteristics exacerbates the region’s water supply. Consequently, the population of Debub is facing severe water shortages and building reservoirs has been promoted as a possible solution to meet the future demand of water supply. This was the most powerful motivation to identify candidate sites for locating water reservoirs. A number of conflicting qualitative and quantitative criteria exist for evaluating alternative sites. Decisions regarding criteria are often accompanied by ambiguities and vagueness. This makes fuzzy logic a more natural approach to this kind of Multi-criteria Decision Analysis (MCDA problems. This paper proposes a combined two-stage MCDA methodology. The first stage involved utilizing the most simplistic type of data aggregation techniques known as Boolean Intersection or logical AND to identify areas restricted by environmental and hydrological constraints and therefore excluded from further study. The second stage involved integrating fuzzy logic with the Analytic Hierarchy Process (AHP to identify optimum and back-up candidate water reservoir sites in the area designated for further study.

  7. The persistence of natural CO2 accumulations over millennial timescales: Integrating noble gas and reservoir data at Bravo Dome, NM

    Science.gov (United States)

    Akhbari, D.

    2017-12-01

    Bravo Dome, the largest CO2 reservoir in the US, is a hydrogeologically closed system that has stored a very large amount of CO2 on millennial time scales. The pre-production gas pressures in Bravo Dome indicate that the reservoir is highly under-pressured and is divided into separate pressure compartments that do not communicate hydrologically. Previous studies used the noble gas composition at Bravo Dome to constrain the amount of dissolved CO2 into the brine. This CO2 dissolution into brine plays an important role in the observed under-pressure at the reservoir. However, the dissolution rates and transport mechanisms remain unknown. In this study, we are looking into reservoir pressures and noble gas composition in the northeastern section of the reservoir to constrain timescales of CO2 dissolution. We are interested in northeastern part of the reservoir because the largest amount of CO2 was dissolved into brine in this section. Also, we specifically look into the evolution of the CO2/3He and 20Ne concentration during convective CO2 dissolution at Bravo Dome. 20Ne has atmospheric origin and is initially in the brine, while 3He and CO2 have magmatic sources and were introduced with the gas. CO2/3He decreases as more CO2 dissolves into brine, due to the higher solubility of CO2 compare to that of 3He. However, 20Ne concentration in the gas increases due to exsolution of 20Ne from brine into the gas phase. We present 2D numerical simulation that demonstrate the persistence of CO2 over 1Ma and reproduce the observed reservoir pressures and noble gas compositions. Our results indicate that convection is required to produce observed changes in gas composition. But diffusion makes a significant contribution to mass transport.

  8. Cost-effectiveness of Campylobacter interventions on broiler farms in six European countries

    NARCIS (Netherlands)

    Wagenberg, van C.P.A.; Horne, van P.L.M.; Sommer, H.M.; Nauta, M.J.

    2016-01-01

    Broilers are an important reservoir for human Campylobacter infections, one of the leading causes of acute diarrheal disease in humans worldwide. Therefore, it is relevant to control Campylobacter on broiler farms. This study estimated the cost-effectiveness ratios of eight Campylobacter

  9. A Layered Decision Model for Cost-Effective System Security

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Huaqiang; Alves-Foss, James; Soule, Terry; Pforsich, Hugh; Zhang, Du; Frincke, Deborah A.

    2008-10-01

    System security involves decisions in at least three areas: identification of well-defined security policies, selection of cost-effective defence strategies, and implementation of real-time defence tactics. Although choices made in each of these areas affect the others, existing decision models typically handle these three decision areas in isolation. There is no comprehensive tool that can integrate them to provide a single efficient model for safeguarding a network. In addition, there is no clear way to determine which particular combinations of defence decisions result in cost-effective solutions. To address these problems, this paper introduces a Layered Decision Model (LDM) for use in deciding how to address defence decisions based on their cost-effectiveness. To validate the LDM and illustrate how it is used, we used simulation to test model rationality and applied the LDM to the design of system security for an e-commercial business case.

  10. Integrated use of antioxidant enzymes and oxidative damage in two fish species to assess pollution in man-made hydroelectric reservoirs.

    Science.gov (United States)

    Sakuragui, M M; Paulino, M G; Pereira, C D S; Carvalho, C S; Sadauskas-Henrique, H; Fernandes, M N

    2013-07-01

    This study investigated the relationship between contaminant body burden and the oxidative stress status of the gills and livers of two wild fish species in the Furnas Hydroelectric Power Station (HPS) reservoir (Minas Gerais, Brazil). Gills and livers presented similar pathways of metals and organochlorine bioaccumulation. During June, organochlorines were associated with lipid peroxidation (LPO), indicating oxidative stress due to the inhibition of the antioxidant enzymes superoxide dismutase and glutathione peroxidase. In the most polluted areas, metal concentrations in the liver were associated with metallothionein. During December, contaminants in the gills and liver were associated with catalase activity and LPO. Aldrin/dieldrin was the contaminant most associated with oxidative damage in the livers of both species. This integrated approach shed light on the relationship between adverse biological effects and bioaccumulation of contaminants inputted by intensive agricultural practices and proved to be a suitable tool for assessing the environmental quality of man-made reservoirs. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Tuition fees and sunk-cost effects

    NARCIS (Netherlands)

    Ketel, N.; Linde, J.; Oosterbeek, H.; van der Klaauw, B.

    2016-01-01

    This article reports on a field experiment testing for sunk-cost effects in an education setting. Students signing up for extra-curricular tutorial sessions randomly received a discount on the tuition fee. The sunk-cost effect predicts that students who pay more will attend more tutorial sessions,

  12. Cost-effectiveness thresholds: pros and cons.

    Science.gov (United States)

    Bertram, Melanie Y; Lauer, Jeremy A; De Joncheere, Kees; Edejer, Tessa; Hutubessy, Raymond; Kieny, Marie-Paule; Hill, Suzanne R

    2016-12-01

    Cost-effectiveness analysis is used to compare the costs and outcomes of alternative policy options. Each resulting cost-effectiveness ratio represents the magnitude of additional health gained per additional unit of resources spent. Cost-effectiveness thresholds allow cost-effectiveness ratios that represent good or very good value for money to be identified. In 2001, the World Health Organization's Commission on Macroeconomics in Health suggested cost-effectiveness thresholds based on multiples of a country's per-capita gross domestic product (GDP). In some contexts, in choosing which health interventions to fund and which not to fund, these thresholds have been used as decision rules. However, experience with the use of such GDP-based thresholds in decision-making processes at country level shows them to lack country specificity and this - in addition to uncertainty in the modelled cost-effectiveness ratios - can lead to the wrong decision on how to spend health-care resources. Cost-effectiveness information should be used alongside other considerations - e.g. budget impact and feasibility considerations - in a transparent decision-making process, rather than in isolation based on a single threshold value. Although cost-effectiveness ratios are undoubtedly informative in assessing value for money, countries should be encouraged to develop a context-specific process for decision-making that is supported by legislation, has stakeholder buy-in, for example the involvement of civil society organizations and patient groups, and is transparent, consistent and fair.

  13. A Departmental Cost-Effectiveness Model.

    Science.gov (United States)

    Holleman, Thomas, Jr.

    In establishing a departmental cost-effectiveness model, the traditional cost-effectiveness model was discussed and equipped with a distant and deflation equation for both benefits and costs. Next, the economics of costing was examined and program costing procedures developed. Then, the model construct was described as it was structured around the…

  14. Reservoir management under geological uncertainty using fast model update

    NARCIS (Netherlands)

    Hanea, R.; Evensen, G.; Hustoft, L.; Ek, T.; Chitu, A.; Wilschut, F.

    2015-01-01

    Statoil is implementing "Fast Model Update (FMU)," an integrated and automated workflow for reservoir modeling and characterization. FMU connects all steps and disciplines from seismic depth conversion to prediction and reservoir management taking into account relevant reservoir uncertainty. FMU

  15. Integrated interpretation of AE clusters and fracture system in Hijiori HDR artificial reservoir; Hijiori koon gantai jinko choryuso no AE cluster to kiretsu system ni kansuru togoteki kaishaku

    Energy Technology Data Exchange (ETDEWEB)

    Tezuka, K [Japan Petroleum Exploration Corp., Tokyo (Japan); Niitsuma, H [Tohoku University, Sendai (Japan)

    1997-05-27

    With regard to a fracture system in the Hijiori hot dry rock artificial reservoir, an attempt was made on an interpretation which integrates different data. Major factors that characterize development and performance of an artificial reservoir are composed of a fracture system in rocks, which acts as circulating water paths, a heat exchange face and a reservoir space. The system relates not only with crack density distribution, but also with cracks activated by water pressure fracturing, cracks generating acoustic emission (AE), and cracks working as major flow paths, all of which are characterized by having respective behaviors and roles. Characteristics are shown on AE cluster distribution, crack distribution, production zone and estimated stress fields. Mutual relationship among these elements was discussed based on the Coulomb`s theory. The most important paths are characterized by distribution of slippery cracks. Directions and appearance frequencies of the slippery cracks affect strongly directionality of the paths, which are governed by distribution of the cracks (weak face) and stress field. Among the slippery cracks, cracks that generate AE are cracks that release large energy when a slip occurs. Evaluation on slippery crack distribution is important. 7 refs., 8 figs.

  16. CT colonography and cost-effectiveness

    Energy Technology Data Exchange (ETDEWEB)

    Mavranezouli, Ifigeneia [University College London, National Collaborating Centre for Mental Health, Centre for Outcomes Research and Effectiveness, Sub-department of Clinical Health Psychology, London (United Kingdom); East, James E. [St Marks Hospital, Imperial College London, Wolfson Unit for Endoscopy, London (United Kingdom); Taylor, Stuart A. [University College Hospital, Specialist X-Ray, London (United Kingdom); University College Hospital, Department of Imaging, London (United Kingdom)

    2008-11-15

    CT colonography (CTC) is increasingly advocated as an effective initial screening tool for colorectal cancer. Nowadays, policy-makers are increasingly interested in cost-effectiveness issues. A number of studies assessing the cost-effectiveness of CTC have been published to date. The majority of findings indicate that CTC is probably not cost-effective when colonoscopy is available, but this conclusion is sensitive to a number of key parameters. This review discusses the findings of these studies, and considers those factors which most influence final conclusions, notably intervention costs, compliance rates, effectiveness of colonoscopy, and the assumed prevalence and natural history of diminutive advanced polyps. (orig.)

  17. CT colonography and cost-effectiveness

    International Nuclear Information System (INIS)

    Mavranezouli, Ifigeneia; East, James E.; Taylor, Stuart A.

    2008-01-01

    CT colonography (CTC) is increasingly advocated as an effective initial screening tool for colorectal cancer. Nowadays, policy-makers are increasingly interested in cost-effectiveness issues. A number of studies assessing the cost-effectiveness of CTC have been published to date. The majority of findings indicate that CTC is probably not cost-effective when colonoscopy is available, but this conclusion is sensitive to a number of key parameters. This review discusses the findings of these studies, and considers those factors which most influence final conclusions, notably intervention costs, compliance rates, effectiveness of colonoscopy, and the assumed prevalence and natural history of diminutive advanced polyps. (orig.)

  18. Reservoir resistivity characterization incorporating flow dynamics

    KAUST Repository

    Arango, Santiago; Sun, Shuyu; Hoteit, Ibrahim; Katterbauer, Klemens

    2016-01-01

    Systems and methods for reservoir resistivity characterization are provided, in various aspects, an integrated framework for the estimation of Archie's parameters for a strongly heterogeneous reservoir utilizing the dynamics of the reservoir are provided. The framework can encompass a Bayesian estimation/inversion method for estimating the reservoir parameters, integrating production and time lapse formation conductivity data to achieve a better understanding of the subsurface rock conductivity properties and hence improve water saturation imaging.

  19. Reservoir resistivity characterization incorporating flow dynamics

    KAUST Repository

    Arango, Santiago

    2016-04-07

    Systems and methods for reservoir resistivity characterization are provided, in various aspects, an integrated framework for the estimation of Archie\\'s parameters for a strongly heterogeneous reservoir utilizing the dynamics of the reservoir are provided. The framework can encompass a Bayesian estimation/inversion method for estimating the reservoir parameters, integrating production and time lapse formation conductivity data to achieve a better understanding of the subsurface rock conductivity properties and hence improve water saturation imaging.

  20. Integrated Reservoir Modeling of CO2-EOR Performance and Storage Potential in the Farnsworth Field Unit, Texas.

    Science.gov (United States)

    Ampomah, W.; Balch, R. S.; Cather, M.; Dai, Z.

    2017-12-01

    We present a performance assessment methodology and storage potential for CO2 enhanced oil recovery (EOR) in partially depleted reservoirs. A three dimensional heterogeneous reservoir model was developed based on geological, geophysics and engineering data from Farnsworth field Unit (FWU). The model aided in improved characterization of prominent rock properties within the Pennsylvanian aged Morrow sandstone reservoir. Seismic attributes illuminated previously unknown faults and structural elements within the field. A laboratory fluid analysis was tuned to an equation of state and subsequently used to predict the thermodynamic minimum miscible pressure (MMP). Datasets including net-to-gross ratio, volume of shale, permeability, and burial history were used to model initial fault transmissibility based on Sperivick model. An improved history match of primary and secondary recovery was performed to set the basis for a CO2 flood study. The performance of the current CO2 miscible flood patterns was subsequently calibrated to historical production and injection data. Several prediction models were constructed to study the effect of recycling, addition of wells and /or new patterns, water alternating gas (WAG) cycles and optimum amount of CO2 purchase on incremental oil production and CO2 storage in the FWU. The history matching study successfully validated the presence of the previously undetected faults within FWU that were seen in the seismic survey. The analysis of the various prediction scenarios showed that recycling a high percentage of produced gas, addition of new wells and a gradual reduction in CO2 purchase after several years of operation would be the best approach to ensure a high percentage of recoverable incremental oil and sequestration of anthropogenic CO2 within the Morrow reservoir. Larger percentage of stored CO2 were dissolved in residual oil and less amount existed as supercritical free CO2. The geomechanical analysis on the caprock proved to an

  1. Cost effectiveness of radon mitigation in Canada

    International Nuclear Information System (INIS)

    Letourneau, E.G.; Krewski, D.; Zielinski, J.M.; McGregor, R.G.

    1992-01-01

    This paper examines the cost effectiveness of comprehensive strategies for reducing exposure to radon gas in indoor air in Canadian homes. The analysis is conducted within the context of a general framework for risk management programme evaluation which includes well-known evaluation techniques such as cost effectiveness and cost-benefit analyses as special cases. Based on this analysis, it is clear that any comprehensive programme to reduce exposure to environmental radon will be extremely expensive, and may not be justifiable in terms of health impact, particularly when considered in relation to other public health programmes. Testing of homes at the point of sale and installing sub-slab suction equipment to reduce exposure to indoor radon where necessary appears to be a relatively cost-effective radon mitigation strategy. In general, radon mitigation was found to be most cost effective in cities with relatively high levels of radon. (author)

  2. Green Infrastructure Siting and Cost Effectiveness Analysis

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Parcel scale green infrastructure siting and cost effectiveness analysis. You can find more details at the project's website.

  3. Integrated Analysis Seismic Inversion and Rockphysics for Determining Secondary Porosity Distribution of Carbonate Reservoir at “FR” Field

    Science.gov (United States)

    Rosid, M. S.; Augusta, F. F.; Haidar, M. W.

    2018-05-01

    In general, carbonate secondary pore structure is very complex due to the significant diagenesis process. Therefore, the determination of carbonate secondary pore types is an important factor which is related to study of production. This paper mainly deals not only to figure out the secondary pores types, but also to predict the distribution of the secondary pore types of carbonate reservoir. We apply Differential Effective Medium (DEM) for analyzing pore types of carbonate rocks. The input parameter of DEM inclusion model is fraction of porosity and the output parameters are bulk moduli and shear moduli as a function of porosity, which is used as input parameter for creating Vp and Vs modelling. We also apply seismic post-stack inversion technique that is used to map the pore type distribution from 3D seismic data. Afterward, we create porosity cube which is better to use geostatistical method due to the complexity of carbonate reservoir. Thus, the results of this study might show the secondary porosity distribution of carbonate reservoir at “FR” field. In this case, North – Northwest of study area are dominated by interparticle pores and crack pores. Hence, that area has highest permeability that hydrocarbon can be more accumulated.

  4. Improving Geologic and Engineering Models of Midcontinent Fracture and Karst-Modified Reservoirs Using New 3-D Seismic Attributes

    Energy Technology Data Exchange (ETDEWEB)

    Susan Nissen; Saibal Bhattacharya; W. Lynn Watney; John Doveton

    2009-03-31

    Our project goal was to develop innovative seismic-based workflows for the incremental recovery of oil from karst-modified reservoirs within the onshore continental United States. Specific project objectives were: (1) to calibrate new multi-trace seismic attributes (volumetric curvature, in particular) for improved imaging of karst-modified reservoirs, (2) to develop attribute-based, cost-effective workflows to better characterize karst-modified carbonate reservoirs and fracture systems, and (3) to improve accuracy and predictiveness of resulting geomodels and reservoir simulations. In order to develop our workflows and validate our techniques, we conducted integrated studies of five karst-modified reservoirs in west Texas, Colorado, and Kansas. Our studies show that 3-D seismic volumetric curvature attributes have the ability to re-veal previously unknown features or provide enhanced visibility of karst and fracture features compared with other seismic analysis methods. Using these attributes, we recognize collapse features, solution-enlarged fractures, and geomorphologies that appear to be related to mature, cockpit landscapes. In four of our reservoir studies, volumetric curvature attributes appear to delineate reservoir compartment boundaries that impact production. The presence of these compartment boundaries was corroborated by reservoir simulations in two of the study areas. Based on our study results, we conclude that volumetric curvature attributes are valuable tools for mapping compartment boundaries in fracture- and karst-modified reservoirs, and we propose a best practices workflow for incorporating these attributes into reservoir characterization. When properly calibrated with geological and production data, these attributes can be used to predict the locations and sizes of undrained reservoir compartments. Technology transfer of our project work has been accomplished through presentations at professional society meetings, peer-reviewed publications

  5. Integrated petrophysical and sedimentological study of the Middle Miocene Nullipore Formation (Ras Fanar Field, Gulf of Suez, Egypt): An approach to volumetric analysis of reservoirs

    Science.gov (United States)

    Afife, Mohamed M.; Sallam, Emad S.; Faris, Mohamed

    2017-10-01

    This study aims to integrate sedimentological, log and core analyses data of the Middle Miocene Nullipore Formation at the Ras Fanar Field (west central Gulf of Suez, Egypt) to evaluate and reconstruct a robust petrophysical model for this reservoir. The Nullipore Formation attains a thickness ranging from 400 to 980 ft and represents a syn-rift succession of the Middle Miocene marine facies. It consists of coralline-algal-reefal limestone, dolomitic limestone and dolostone facies, with few clay and anhydrite intercalations. Petrographically, seven microfacies types (MF1 to MF7) have been recognized and assembled genetically into three related facies associations (FA1 to FA3). These associations accumulated in three depositional environments: 1) peritidal flat, 2) restricted lagoon, and 3) back-shoal environments situated on a shallow inner ramp (homoclinal) setting. The studied rocks have been influenced by different diagenetic processes (dolomitization, cementation, compaction, authigenesis and dissolution), which led to diminishing and/or enhancing the reservoir quality. Three superimposed 3rd-order depositional sequences are included in the Nullipore succession displaying both retrogradational and aggradational packages of facies. Given the hydrocarbon potential of the Nullipore Formation, conventional well logs of six boreholes and core analyses data from one of these wells (RF-B12) are used to identify electrofacies zones of the Nullipore Formation. The Nullipore Formation has been subdivided into three electrofacies zones (the Nullipore-I, Nullipore-II, and Nullipore-III) that are well-correlated with the three depositional sequences. Results of petrographical studies and log analyses data have been employed in volumetric calculations to estimate the amount of hydrocarbon-in-place and then the ultimate recovery of the Nullipore reservoir. The volumetric calculations indicate that the total volume of oil-in-place is 371 MMSTB at 50% probability (P50), whereas

  6. Biosimilar medicines and cost-effectiveness

    Directory of Open Access Journals (Sweden)

    Steven Simoens

    2011-02-01

    Full Text Available Steven SimoensResearch Centre for Pharmaceutical Care and Pharmaco-economics, Faculty of Pharmaceutical Sciences, Katholieke Universiteit Leuven, Leuven, BelgiumAbstract: Given that biosimilars are agents that are similar but not identical to the reference biopharmaceutical, this study aims to introduce and describe specific issues related to the economic evaluation of biosimilars by focusing on the relative costs, relative effectiveness, and cost-effectiveness of biosimilars. Economic evaluation assesses the cost-effectiveness of a medicine by comparing the costs and outcomes of a medicine with those of a relevant comparator. The assessment of cost-effectiveness of a biosimilar is complicated by the fact that evidence needed to obtain marketing authorization from a registration authority does not always correspond to the data requirements of a reimbursement authority. In particular, this relates to the availability of adequately powered equivalence or noninferiority studies, the need for comparative data about the effectiveness in a real-world setting rather than the efficacy in a structured setting, and the use of health outcome measures instead of surrogate endpoints. As a biosimilar is likely to be less expensive than the comparator (eg, the reference biopharmaceutical, the assessment of the cost-effectiveness of a biosimilar depends on the relative effectiveness. If appropriately designed and powered clinical studies demonstrate equivalent effectiveness between a biosimilar and the comparator, then a cost-minimization analysis identifies the least expensive medicine. If there are differences in the effectiveness of a biosimilar and the comparator, other techniques of economic evaluation need to be employed, such as cost-effectiveness analysis or cost-utility analysis. Given that there may be uncertainty surrounding the long-term safety (ie, risk of immunogenicity and rare adverse events and effectiveness of a biosimilar, the cost-effectiveness

  7. An integrated approach to model the biomagnification of organic pollutants in aquatic food webs of the Yangtze Three Gorges Reservoir ecosystem using adapted pollution scenarios.

    Science.gov (United States)

    Scholz-Starke, Björn; Ottermanns, Richard; Rings, Ursula; Floehr, Tilman; Hollert, Henner; Hou, Junli; Li, Bo; Wu, Ling Ling; Yuan, Xingzhong; Strauch, Katrin; Wei, Hu; Norra, Stefan; Holbach, Andreas; Westrich, Bernhard; Schäffer, Andreas; Roß-Nickoll, Martina

    2013-10-01

    The impounding of the Three Gorges Reservoir (TGR) at the Yangtze River caused large flooding of urban, industrial, and agricultural areas, and profound land use changes took place. Consequently, substantial amounts of organic and inorganic pollutants were released into the reservoir. Additionally, contaminants and nutrients are entering the reservoir by drift, drainage, and runoff from adjacent agricultural areas as well as from sewage of industry, aquacultures, and households. The main aim of the presented research project is a deeper understanding of the processes that determines the bioaccumulation and biomagnification of organic pollutants, i.e., mainly pesticides, in aquatic food webs under the newly developing conditions of the TGR. The project is part of the Yangtze-Hydro environmental program, financed by the German Ministry of Education and Science. In order to test combinations of environmental factors like nutrients and pollution, we use an integrated modeling approach to study the potential accumulation and biomagnification. We describe the integrative modeling approach and the consecutive adaption of the AQUATOX model, used as modeling framework for ecological risk assessment. As a starting point, pre-calibrated simulations were adapted to Yangtze-specific conditions (regionalization). Two exemplary food webs were developed by a thorough review of the pertinent literature. The first typical for the flowing conditions of the original Yangtze River and the Daning River near the city of Wushan, and the second for the stagnant reservoir characteristics of the aforementioned region that is marked by an intermediate between lake and large river communities of aquatic organisms. In close cooperation with German and Chinese partners of the Yangtze-Hydro Research Association, other site-specific parameters were estimated. The MINIBAT project contributed to the calibration of physicochemical and bathymetric parameters, and the TRANSMIC project delivered

  8. Cost effectiveness of selective decontamination of the digestive tract in liver transplant patients

    NARCIS (Netherlands)

    van Enckevort, PJ; Zwaveling, JH; Bottema, JT; Maring, JK; Klompmaker, IJ; Slooff, MJH; TenVergert, EM

    2001-01-01

    Objective: To assess the cost effectiveness of selective decontamination of the digestive tract (SDD) in liver transplant patients. Design: Randomised, placebo-controlled, double-blind trial with an integrated economic evaluation. Setting: Two university hospitals in The Netherlands. Cost

  9. Cost-effectiveness of a quality improvement collaborative focusing on patients with diabetes.

    NARCIS (Netherlands)

    Schouten, L.M.T.; Niessen, L.W.; Pas, J.W. van der; Grol, R.P.T.M.; Hulscher, M.E.J.L.

    2010-01-01

    OBJECTIVE: To investigate the lifelong health effects, costs, and cost-effectiveness of a quality improvement collaborative focusing on improving diabetes management in an integrated care setting. STUDY DESIGN AND METHODS: Economic evaluation from a healthcare perspective with lifetime horizon

  10. Application of Advanced Reservoir Characterization, Simulation, and Production Optimization Strategies to Maximize Recovery in Slope and Basin Clastic Reservoirs, West Texas (Delaware Basin)

    Energy Technology Data Exchange (ETDEWEB)

    Dutton, S.P.; Flanders, W.A.; Guzman, J.I.; Zirczy, H.

    1999-06-08

    The objective of this Class III project is to demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost-effective way to recover a higher percentage of the original oil in place through geologically based field development. This year the project focused on reservoir characterization of the East Ford unit, a representative Delaware Mountain Group field that produces from the upper Bell Canyon Formation (Ramsey Sandstone). The field, discovered in 1960, is operated by Orla Petco, Inc., as the East Ford unit; it contained an estimated 19.8 million barrels (MMbbl) of original oil in place. Petrophysical characterization of the East Ford unit was accomplished by integrating core and log data and quantifying petrophysical properties from wireline logs. Most methods of petrophysical analysis that had been developed during an earlier study of the Ford Geraldine unit were successfully transferred to the East Ford unit. The approach that was used to interpret water saturation from resistivity logs, however, had to be modified because in some East Ford wells the log-calculated water saturation was too high and inconsistent with observations made during the actual production. Log-porosity to core-porosity transforms and core-porosity to core-permeability transforms were derived from the East Ford reservoir. The petrophysical data were used to map porosity, permeability, net pay, water saturation, mobil-oil saturation, and other reservoir properties.

  11. Cost-effectiveness analysis of diarrhoea management approaches in Nigeria: A decision analytical model.

    Directory of Open Access Journals (Sweden)

    Charles E Okafor

    2017-12-01

    Full Text Available Diarrhoea is a leading cause of death in Nigerian children under 5 years. Implementing the most cost-effective approach to diarrhoea management in Nigeria will help optimize health care resources allocation. This study evaluated the cost-effectiveness of various approaches to diarrhoea management namely: the 'no treatment' approach (NT; the preventive approach with rotavirus vaccine; the integrated management of childhood illness for diarrhoea approach (IMCI; and rotavirus vaccine plus integrated management of childhood illness for diarrhoea approach (rotavirus vaccine + IMCI.Markov cohort model conducted from the payer's perspective was used to calculate the cost-effectiveness of the four interventions. The markov model simulated a life cycle of 260 weeks for 33 million children under five years at risk of having diarrhoea (well state. Disability adjusted life years (DALYs averted was used to quantify clinical outcome. Incremental cost-effectiveness ratio (ICER served as measure of cost-effectiveness.Based on cost-effectiveness threshold of $2,177.99 (i.e. representing Nigerian GDP/capita, all the approaches were very cost-effective but rotavirus vaccine approach was dominated. While IMCI has the lowest ICER of $4.6/DALY averted, the addition of rotavirus vaccine was cost-effective with an ICER of $80.1/DALY averted. Rotavirus vaccine alone was less efficient in optimizing health care resource allocation.Rotavirus vaccine + IMCI approach was the most cost-effective approach to childhood diarrhoea management. Its awareness and practice should be promoted in Nigeria. Addition of rotavirus vaccine should be considered for inclusion in the national programme of immunization. Although our findings suggest that addition of rotavirus vaccine to IMCI for diarrhoea is cost-effective, there may be need for further vaccine demonstration studies or real life studies to establish the cost-effectiveness of the vaccine in Nigeria.

  12. Privacy Enforcement in a Cost-Effective Smart Grid

    DEFF Research Database (Denmark)

    Mikkelsen, Søren Aagaard

    In this technical report we present the current state of the research conducted during the first part of the PhD period. The PhD thesis “Privacy Enforcement in a Cost-Effective Smart Grid” focuses on ensuring privacy when generating market for energy service providers that develop web services...... for the residential domain in the envisaged smart grid. The PhD project is funded and associated to the EU project “Energy Demand Aware Open Services for Smart Grid Intelligent Automation” (Smart HG) and therefore introduces the project on a system-level. Based on this, we present some of the integration, security...... and privacy challenges that emerge when designing a system architecture and infrastructure. The resulting architecture is a consumer-centric and agent-based design and uses open Internet-based communication protocols for enabling interoperability while being cost-effective. Finally, the PhD report present...

  13. The integration of elastic wave properties and machine learning for the distribution of petrophysical properties in reservoir modeling

    Science.gov (United States)

    Ratnam, T. C.; Ghosh, D. P.; Negash, B. M.

    2018-05-01

    Conventional reservoir modeling employs variograms to predict the spatial distribution of petrophysical properties. This study aims to improve property distribution by incorporating elastic wave properties. In this study, elastic wave properties obtained from seismic inversion are used as input for an artificial neural network to predict neutron porosity in between well locations. The method employed in this study is supervised learning based on available well logs. This method converts every seismic trace into a pseudo-well log, hence reducing the uncertainty between well locations. By incorporating the seismic response, the reliance on geostatistical methods such as variograms for the distribution of petrophysical properties is reduced drastically. The results of the artificial neural network show good correlation with the neutron porosity log which gives confidence for spatial prediction in areas where well logs are not available.

  14. RECENT ADVANCES IN NATURALLY FRACTURED RESERVOIR MODELING

    OpenAIRE

    ORDOÑEZ, A; PEÑUELA, G; IDROBO, E. A; MEDINA, C. E

    2001-01-01

    Large amounts of oil reserves are contained in naturally fractured reservoirs. Most of these hydrocarbon volumes have been left behind because of the poor knowledge and/or description methodology of those reservoirs. This lack of knowledge has lead to the nonexistence of good quantitative models for this complicated type of reservoirs. The complexity of naturally fractured reservoirs causes the need for integration of all existing information at all scales (drilling, well logging, seismic, we...

  15. Cesium reservoir and interconnective components

    International Nuclear Information System (INIS)

    1994-03-01

    The program objective is to demonstrate the technology readiness of a TFE (thermionic fuel element) suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW range. A thermionic converter must be supplied with cesium vapor for two reasons. Cesium atoms adsorbed on the surface of the emitter cause a reduction of the emitter work function to permit high current densities without excessive heating of the emitter. The second purpose of the cesium vapor is to provide space-charge neutralization in the emitter-collector gap so that the high current densities may flow across the gap unattenuated. The function of the cesium reservoir is to provide a source of cesium atoms, and to provide a reserve in the event that cesium is lost from the plasma by any mechanism. This can be done with a liquid cesium metal reservoir in which case it is heated to the desired temperature with auxiliary heaters. In a TFE, however, it is desirable to have the reservoir passively heated by the nuclear fuel. In this case, the reservoir must operate at a temperature intermediate between the emitter and the collector, ruling out the use of liquid reservoirs. Integral reservoirs contained within the TFE will produce cesium vapor pressures in the desired range at typical electrode temperatures. The reservoir material that appears to be the best able to meet requirements is graphite. Cesium intercalates easily into graphite, and the cesium pressure is insensitive to loading for a given intercalation stage. The goals of the cesium reservoir test program were to verify the performance of Cs-graphite reservoirs in the temperature-pressure range of interest to TFE operation, and to test the operation of these reservoirs after exposure to a fast neutron fluence corresponding to seven year mission lifetime. In addition, other materials were evaluated for possible use in the integral reservoir

  16. Cost-effectiveness analysis and innovation.

    Science.gov (United States)

    Jena, Anupam B; Philipson, Tomas J

    2008-09-01

    While cost-effectiveness (CE) analysis has provided a guide to allocating often scarce resources spent on medical technologies, less emphasis has been placed on the effect of such criteria on the behavior of innovators who make health care technologies available in the first place. A better understanding of the link between innovation and cost-effectiveness analysis is particularly important given the large role of technological change in the growth in health care spending and the growing interest of explicit use of CE thresholds in leading technology adoption in several Westernized countries. We analyze CE analysis in a standard market context, and stress that a technology's cost-effectiveness is closely related to the consumer surplus it generates. Improved CE therefore often clashes with interventions to stimulate producer surplus, such as patents. We derive the inconsistency between technology adoption based on CE analysis and economic efficiency. Indeed, static efficiency, dynamic efficiency, and improved patient health may all be induced by the cost-effectiveness of the technology being at its worst level. As producer appropriation of the social surplus of an innovation is central to the dynamic efficiency that should guide CE adoption criteria, we exemplify how appropriation can be inferred from existing CE estimates. For an illustrative sample of technologies considered, we find that the median technology has an appropriation of about 15%. To the extent that such incentives are deemed either too low or too high compared to dynamically efficient levels, CE thresholds may be appropriately raised or lowered to improve dynamic efficiency.

  17. Gedanken Experiments in Educational Cost Effectiveness

    Science.gov (United States)

    Brudner, Harvey J.

    1978-01-01

    Discusses the effectiveness of cost determining techniques in education. The areas discussed are: education and management; cost-effectiveness models; figures of merit determination; and the implications as they relate to the areas of audio-visual and computer educational technology. (Author/GA)

  18. Cost-effectiveness of colorectal cancer screening

    NARCIS (Netherlands)

    I. Lansdorp-Vogelaar (Iris); A.B. Knudsen (Amy); H. Brenner (Hermann)

    2011-01-01

    textabstractColorectal cancer is an important public health problem. Several screening methods have been shown to be effective in reducing colorectal cancer mortality. The objective of this review was to assess the cost-effectiveness of the different colorectal cancer screening methods and to

  19. The Interpersonal Sunk-Cost Effect.

    Science.gov (United States)

    Olivola, Christopher Y

    2018-05-01

    The sunk-cost fallacy-pursuing an inferior alternative merely because we have previously invested significant, but nonrecoverable, resources in it-represents a striking violation of rational decision making. Whereas theoretical accounts and empirical examinations of the sunk-cost effect have generally been based on the assumption that it is a purely intrapersonal phenomenon (i.e., solely driven by one's own past investments), the present research demonstrates that it is also an interpersonal effect (i.e., people will alter their choices in response to other people's past investments). Across eight experiments ( N = 6,076) covering diverse scenarios, I documented sunk-cost effects when the costs are borne by someone other than the decision maker. Moreover, the interpersonal sunk-cost effect is not moderated by social closeness or whether other people observe their sunk costs being "honored." These findings uncover a previously undocumented bias, reveal that the sunk-cost effect is a much broader phenomenon than previously thought, and pose interesting challenges for existing accounts of this fascinating human tendency.

  20. [Cost-effectiveness of addiction care].

    Science.gov (United States)

    Suijkerbuijk, A W M; van Gils, P F; Greeven, P G J; de Wit, G A

    2015-01-01

    A large number of interventions are available for the treatment of addiction. Professionals need to know about the effectiveness and cost-effectiveness of interventions so they can prioritise appropriate interventions for the treatment of addiction. To provide an overview of the scientific literature on the cost-effectiveness of addiction treatment for alcohol- and drug-abusers. We searched the databases Medline and Centre for Reviews and Dissemination. To be relevant for our study, articles had to focus on interventions in the health-care setting, have a Western context and have a health-related outcome measure such as quality adjusted life years (QALY). Twenty-nine studies met our inclusion criteria: 15 for alcohol and 14 for drugs. The studies on alcohol addiction related mainly to brief interventions. They proved to be cost-saving or had a favourable incremental cost-effectiveness ratio (ICER), remaining below the threshold of € 20,000 per QALY. The studies on drug addiction all involved pharmacotherapeutic interventions. In the case of 10 out of 14 interventions, the ICER was less than € 20,000 per QALY. Almost all of the interventions studied were cost-saving or cost-effective. Many studies consider only health-care costs. Additional research, for instance using a social cost-benefit analysis, could provide more details about the costs of addiction and about the impact that an intervention could have in these/the costs.

  1. Cost-effectiveness of Campylobacter interventions on broiler farms in six European countries

    DEFF Research Database (Denmark)

    van Wagenberg, C.P.A.; van Horne, P.L.M.; Sommer, Helle Mølgaard

    2016-01-01

    interventions on broiler farms in six European countries: Denmark, the Netherlands, Norway, Poland, Spain, and United Kingdom. The cost-effectiveness ratio of an intervention was the estimated costs of the intervention divided by the estimated public health benefits due to the intervention, and was expressed......Broilers are an important reservoir for human Campylobacter infections, one of the leading causes of acute diarrheal disease in humans worldwide. Therefore, it is relevant to control Campylobacter on broiler farms. This study estimated the cost-effectiveness ratios of eight Campylobacter...... in euro per avoided disability-adjusted life year (DALY). Interventions were selected on the basis of a European risk factor study and other risk factor research. A deterministic simulation model was developed to estimate the cost-effectiveness ratio of each intervention, if it would be implemented on all...

  2. Making choices in health: WHO guide to cost effectiveness analysis

    National Research Council Canada - National Science Library

    Tan Torres Edejer, Tessa

    2003-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . XXI PART ONE: METHODS COST-EFFECTIVENESS FOR GENERALIZED ANALYSIS 1. 2. What is Generalized Cost-Effectiveness Analysis? . . . . . . . . . . . . 3 Undertaking...

  3. Sweet spot identification and smart development -An integrated reservoir characterization study of a posidonia shale of a posidonia shale outcrop analogue

    NARCIS (Netherlands)

    Veen, J.H. ten; Verreussel, R.M.C.H.; Ventra, D.; Zijp, M.H.A.A.

    2014-01-01

    Shale gas reservoir stimulation procedures (e.g. hydraulic fracturing) require upfront prediction and planning that should be supported by a comprehensive reservoir characterization. Therefore, understanding shale depositional processes and associated vertical and lateral sedimentological

  4. Fracture-network analysis of the Latemar Platform (northern Italy): integrating outcrop studies to constrain the hydraulic properties of fractures in reservoir models

    NARCIS (Netherlands)

    Boro, H.; Rosero, E.; Bertotti, G.V.

    2014-01-01

    Fractures in subsurface reservoirs are known to have significant impacts on reservoir productivity. Quantifying their importance, however, is challenged by limited subsurface observations, and intense computations for modelling and upscaling. In this paper, we present a workflow to construct and

  5. Cost-effectiveness of tubal patency tests.

    Science.gov (United States)

    Verhoeve, H R; Moolenaar, L M; Hompes, P; van der Veen, F; Mol, B W J

    2013-04-01

    Guidelines are not in agreement on the most effective diagnostic scenario for tubal patency testing; therefore, we evaluated the cost-effectiveness of invasive tubal testing in subfertile couples compared with no testing and treatment. Cost-effectiveness analysis. Decision analytic framework. Computer-simulated cohort of subfertile women. We evaluated six scenarios: (1) no tests and no treatment; (2) immediate treatment without tubal testing; (3) delayed treatment without tubal testing; (4) hysterosalpingogram (HSG), followed by immediate or delayed treatment, according to diagnosis (tailored treatment); (5) HSG and a diagnostic laparoscopy (DL) in case HSG does not prove tubal patency, followed by tailored treatment; and (6) DL followed by tailored treatment. Expected cumulative live births after 3 years. Secondary outcomes were cost per couple and the incremental cost-effectiveness ratio. For a 30-year-old woman with otherwise unexplained subfertility for 12 months, 3-year cumulative live birth rates were 51.8, 78.1, 78.4, 78.4, 78.6 and 78.4%, and costs per couple were €0, €6968, €5063, €5410, €5405 and €6163 for scenarios 1, 2, 3, 4, 5 and 6, respectively. The incremental cost-effectiveness ratios compared with scenario 1 (reference strategy), were €26,541, €19,046, €20,372, €20,150 and €23,184 for scenarios 2, 3, 4, 5 and 6, respectively. Sensitivity analysis showed the model to be robust over a wide range of values for the variables. The most cost-effective scenario is to perform no diagnostic tubal tests and to delay in vitro fertilisation (IVF) treatment for at least 12 months for women younger than 38 years old, and to perform no tubal tests and start immediate IVF treatment from the age of 39 years. If an invasive diagnostic test is planned, HSG followed by tailored treatment, or a DL if HSG shows no tubal patency, is more cost-effective than DL. © 2013 The Authors BJOG An International Journal of Obstetrics and Gynaecology © 2013

  6. Integration into JRODOS the models of radionuclide transport in rivers, reservoirs and coastal waters to support the emergency response in early accidental stages

    Energy Technology Data Exchange (ETDEWEB)

    Zheleznyak, M.; Bezhenar, R.; Boyko, O.; Ievdin, I.; Koshebutsky, V.; Maderich, V. [Institute of Mathematical Machines and Systems, National Academy of Sciences of Ukraine (Ukraine); Raskob, W.; Trybushnyi, D. [Karlsruhe Institute of Technology, Institut fuer Kern- und Energietechnik (Germany)

    2014-07-01

    The decision support system for offsite nuclear emergency management RODOS (Real-time on-line decision support), developed under several EC RTD Framework Programs, contains many models related to support decision making in case of a nuclear or radiological emergency. Based on the request of the end users, it was re-engineered based on the JAVA technology and further named JRODOS. The consequences of the Fukushima Daiichi Nuclear Power Plant accident clearly demonstrated the importance of modeling tools predicting the radionuclide transport in marine and freshwater environment and assessing the doses to the public via the aquatic food chain to improve decision making in general. As a consequence, such an activity was launched as part of the European project PREPARE aiming to integrate the 3-dimensional model THREETOX for the radionuclide transport in coastal waters, estuaries, deep lakes, and reservoirs into hydrological model chain of JRODOS - JHDM (JRODOS Hydrological Dispersion Module). So far JHDM contains several aquatic radionuclide transport models describing the sequence of the processes 'atmospheric fallout to watershed' - 'radionuclide inflow to a river net' - 'radionuclide transport in river' - 'doses via aquatic pathways'. The implementation of the THREETOX model into this chain by developing also a user friendly interface will extend the applicability of JRODOS to deep fresh water bodies and marine coastal waters. This paper describes the assessment capabilities of this advanced model chain for two examples of the JRODOS implementation in Ukraine. JRODOS is installed in the emergency centers for two Ukrainian Nuclear Power Plants (NPP) - Zaporizzhya NPP (ZNPP) and Rivne NPP (RNPP). The different models of the JHDM were customized for these NPPs taking into account the characteristics of the water bodies in the surroundings of the NPPs. For the RNPP, located at the bank of the Sozh River which is a tributary of the

  7. Cost-effectiveness of the fenceline cow

    Energy Technology Data Exchange (ETDEWEB)

    Eichholz, G G; Lando, A V [Georgia Inst. of Tech., Atlanta (USA). School of Nuclear Engineering

    1979-07-01

    The grass-cow-milk pathway for /sup 131/I is one of the main contributers to estimated population dose from BWR's and PWR's. Such estimates assume a cow at the fenceline grazing for 12 months of the year. Reductions in the population dose would require a trade-off, based on cost-effectiveness criteria, between additions to the effluent treatment system, expanding the exclusion area, or raising the stack height. It is suggested that a more practical and more cost-effective means may be provided by redistribution of nearby dairy cattle (or goats), and that the plant operator buy these animals and/or contract with the land owner(s) to use the land for alternative crops. Even a subsidy to compensate the farmer for any financial losses entailed in these changes might be less expensive than alternative technical installations to lower iodine effluent levels. Figures are provided to illustrate these points.

  8. Cost-effectiveness of monitoring free flaps.

    Science.gov (United States)

    Subramaniam, Shiva; Sharp, David; Jardim, Christopher; Batstone, Martin D

    2016-06-01

    Methods of free flap monitoring have become more sophisticated and expensive. This study aims to determine the cost of free flap monitoring and examine its cost effectiveness. We examined a group of patients who had had free flaps to the head and neck over a two-year period, and combined these results with costs obtained from business managers and staff. There were 132 free flaps with a success rate of 99%. The cost of monitoring was Aus $193/flap. Clinical monitoring during this time period cost Aus$25 476 and did not lead to the salvage of any free flaps. Cost equivalence is reached between monitoring and not monitoring only at a failure rate of 15.8%. This is to our knowledge the first study to calculate the cost of clinical monitoring of free flaps, and to examine its cost-effectiveness. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. All rights reserved.

  9. Making choices in health: WHO guide to cost effectiveness analysis

    National Research Council Canada - National Science Library

    Tan Torres Edejer, Tessa

    2003-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 6. Uncertainty in cost-effectiveness analysis . . . . . . . . . . . . . . . . . . 73 7. 8. Policy uses of Generalized CEA...

  10. Cost-effectiveness Analysis with Influence Diagrams.

    Science.gov (United States)

    Arias, M; Díez, F J

    2015-01-01

    Cost-effectiveness analysis (CEA) is used increasingly in medicine to determine whether the health benefit of an intervention is worth the economic cost. Decision trees, the standard decision modeling technique for non-temporal domains, can only perform CEA for very small problems. To develop a method for CEA in problems involving several dozen variables. We explain how to build influence diagrams (IDs) that explicitly represent cost and effectiveness. We propose an algorithm for evaluating cost-effectiveness IDs directly, i.e., without expanding an equivalent decision tree. The evaluation of an ID returns a set of intervals for the willingness to pay - separated by cost-effectiveness thresholds - and, for each interval, the cost, the effectiveness, and the optimal intervention. The algorithm that evaluates the ID directly is in general much more efficient than the brute-force method, which is in turn more efficient than the expansion of an equivalent decision tree. Using OpenMarkov, an open-source software tool that implements this algorithm, we have been able to perform CEAs on several IDs whose equivalent decision trees contain millions of branches. IDs can perform CEA on large problems that cannot be analyzed with decision trees.

  11. Cost-effectiveness Analysis for Technology Acquisition.

    Science.gov (United States)

    Chakravarty, A; Naware, S S

    2008-01-01

    In a developing country with limited resources, it is important to utilize the total cost visibility approach over the entire life-cycle of the technology and then analyse alternative options for acquiring technology. The present study analysed cost-effectiveness of an "In-house" magnetic resonance imaging (MRI) scan facility of a large service hospital against outsourcing possibilities. Cost per unit scan was calculated by operating costing method and break-even volume was calculated. Then life-cycle cost analysis was performed to enable total cost visibility of the MRI scan in both "In-house" and "outsourcing of facility" configuration. Finally, cost-effectiveness analysis was performed to identify the more acceptable decision option. Total cost for performing unit MRI scan was found to be Rs 3,875 for scans without contrast and Rs 4,129 with contrast. On life-cycle cost analysis, net present value (NPV) of the "In-house" configuration was found to be Rs-(4,09,06,265) while that of "outsourcing of facility" configuration was Rs-(5,70,23,315). Subsequently, cost-effectiveness analysis across eight Figures of Merit showed the "In-house" facility to be the more acceptable option for the system. Every decision for acquiring high-end technology must be subjected to life-cycle cost analysis.

  12. Cost effectiveness of surveillance for GI cancers.

    Science.gov (United States)

    Omidvari, Amir-Houshang; Meester, Reinier G S; Lansdorp-Vogelaar, Iris

    2016-12-01

    Gastrointestinal (GI) diseases are among the leading causes of death in the world. To reduce the burden of GI diseases, surveillance is recommended for some diseases, including for patients with inflammatory bowel diseases, Barrett's oesophagus, precancerous gastric lesions, colorectal adenoma, and pancreatic neoplasms. This review aims to provide an overview of the evidence on cost-effectiveness of surveillance of individuals with GI conditions predisposing them to cancer, specifically focussing on the aforementioned conditions. We searched the literature and reviewed 21 studies. Despite heterogeneity of studies in terms of settings, study populations, surveillance strategies and outcomes, most reviewed studies suggested at least some surveillance of patients with these GI conditions to be cost-effective. For some high-risk conditions frequent surveillance with 3-month intervals was warranted, while for other conditions, surveillance may only be cost-effective every 10 years. Further studies based on more robust effectiveness evidence are needed to inform and optimise surveillance programmes for GI cancers. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Is expanding Medicare coverage cost-effective?

    Directory of Open Access Journals (Sweden)

    Muennig Peter

    2005-03-01

    Full Text Available Abstract Background Proposals to expand Medicare coverage tend to be expensive, but the value of services purchased is not known. This study evaluates the efficiency of the average private supplemental insurance plan for Medicare recipients. Methods Data from the National Health Interview Survey, the National Death Index, and the Medical Expenditure Panel Survey were analyzed to estimate the costs, changes in life expectancy, and health-related quality of life gains associated with providing private supplemental insurance coverage for Medicare beneficiaries. Model inputs included socio-demographic, health, and health behavior characteristics. Parameter estimates from regression models were used to predict quality-adjusted life years (QALYs and costs associated with private supplemental insurance relative to Medicare only. Markov decision analysis modeling was then employed to calculate incremental cost-effectiveness ratios. Results Medicare supplemental insurance is associated with increased health care utilization, but the additional costs associated with this utilization are offset by gains in quality-adjusted life expectancy. The incremental cost-effectiveness of private supplemental insurance is approximately $24,000 per QALY gained relative to Medicare alone. Conclusion Supplemental insurance for Medicare beneficiaries is a good value, with an incremental cost-effectiveness ratio comparable to medical interventions commonly deemed worthwhile.

  14. [Incremental cost effectiveness of multifocal cataract surgery].

    Science.gov (United States)

    Pagel, N; Dick, H B; Krummenauer, F

    2007-02-01

    Supplementation of cataract patients with multifocal intraocular lenses involves an additional financial investment when compared to the corresponding monofocal supplementation, which usually is not funded by German health care insurers. In the context of recent resource allocation discussions, however, the cost effectiveness of multifocal cataract surgery could become an important rationale. Therefore an evidence-based estimation of its cost effectiveness was carried out. Three independent meta-analyses were implemented to estimate the gain in uncorrected near visual acuity and best corrected visual acuity (vision lines) as well as the predictability (fraction of patients without need for reading aids) of multifocal supplementation. Study reports published between 1995 and 2004 (English or German language) were screened for appropriate key words. Meta effects in visual gain and predictability were estimated by means and standard deviations of the reported effect measures. Cost data were estimated by German DRG rates and individual lens costs; the cost effectiveness of multifocal cataract surgery was then computed in terms of its marginal cost effectiveness ratio (MCER) for each clinical benefit endpoint; the incremental costs of multifocal versus monofocal cataract surgery were further estimated by means of their respective incremental cost effectiveness ratio (ICER). An independent meta-analysis estimated the complication profiles to be expected after monofocal and multifocal cataract surgery in order to evaluate expectable complication-associated additional costs of both procedures; the marginal and incremental cost effectiveness estimates were adjusted accordingly. A sensitivity analysis comprised cost variations of +/- 10 % and utility variations alongside the meta effect estimate's 95 % confidence intervals. Total direct costs from the health care insurer's perspective were estimated 3363 euro, associated with a visual meta benefit in best corrected visual

  15. Economics of Developing Hot Stratigraphic Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Greg Mines; Hillary Hanson; Rick Allis; Joseph Moore

    2014-09-01

    Stratigraphic geothermal reservoirs at 3 – 4 km depth in high heat-flow basins are capable of sustaining 100 MW-scale power plants at about 10 c/kWh. This paper examines the impacts on the levelized cost of electricity (LCOE) of reservoir depth and temperature, reservoir productivity, and drillhole/casing options. For a reservoir at 3 km depth with a moderate productivity index by hydrothermal reservoir standards (about 50 L/s/MPa, 5.6 gpm/psi), an LCOE of 10c/kWh requires the reservoir to be at about 200°C. This is the upper temperature limit for pumps. The calculations assume standard hydrothermal drilling costs, with the production interval completed with a 7 inch liner in an 8.5 inch hole. If a reservoir at 4 km depth has excellent permeability characteristics with a productivity index of 100 L/s/MPa (11.3 gpm/psi), then the LCOE is about 11 c/kWh assuming the temperature decline rate with development is not excessive (< 1%/y, with first thermal breakthrough delayed by about 10 years). Completing wells with modest horizontal legs (e.g. several hundred meters) may be important for improving well productivity because of the naturally high, sub-horizontal permeability in this type of reservoir. Reducing the injector/producer well ratio may also be cost-effective if the injectors are drilled as larger holes.

  16. Cost-effectiveness analysis of rotavirus vaccination in Argentina.

    Science.gov (United States)

    Urueña, Analía; Pippo, Tomás; Betelu, María Sol; Virgilio, Federico; Hernández, Laura; Giglio, Norberto; Gentile, Ángela; Diosque, Máximo; Vizzotti, Carla

    2015-05-07

    Rotavirus is a leading cause of severe diarrhea in children under 5. In Argentina, the most affected regions are the Northeast and Northwest, where hospitalizations and deaths are more frequent. This study estimated the cost-effectiveness of adding either of the two licensed rotavirus vaccines to the routine immunization schedule. The integrated TRIVAC vaccine cost-effectiveness model from the Pan American Health Organization's ProVac Initiative (Version 2.0) was used to assess health benefits, costs savings, life-years gained (LYGs), DALYs averted, and cost/DALY averted of vaccinating 10 successive cohorts, from the health care system and societal perspectives. Two doses of monovalent (RV1) rotavirus vaccine and three doses of pentavalent (RV5) rotavirus vaccine were each compared to a scenario assuming no vaccination. The price/dose was US$ 7.50 and US$ 5.15 for RV1 and RV5, respectively. We ran both a national and sub-national analysis, discounting all costs and benefits 3% annually. Our base case results were compared to a range of alternative univariate and multivariate scenarios. The number of LYGs was 5962 and 6440 for RV1 and RV5, respectively. The cost/DALY averted when compared to no vaccination from the health care system and societal perspective was: US$ 3870 and US$ 1802 for RV1, and US$ 2414 and US$ 358 for RV5, respectively. Equivalent figures for the Northeast were US$ 1470 and US$ 636 for RV1, and US$ 913 and US$ 80 for RV5. Therefore, rotavirus vaccination was more cost-effective in the Northeast compared to the whole country; and, in the Northwest, health service's costs saved outweighed the cost of introducing the vaccine. Vaccination with either vaccine compared to no vaccination was highly cost-effective based on WHO guidelines and Argentina's 2011 per capita GDP of US$ 9090. Key variables influencing results were vaccine efficacy, annual loss of efficacy, relative coverage of deaths, vaccine price, and discount rate. Compared to no

  17. A novel bio-electrochemical system with sand/activated carbon separator, Al anode and bio-anode integrated micro-electrolysis/electro-flocculation cost effectively treated high load wastewater with energy recovery.

    Science.gov (United States)

    Gao, Changfei; Liu, Lifen; Yang, Fenglin

    2018-02-01

    A novel bio-electrochemical system (BES) was developed by integrating micro-electrolysis/electro-flocculation from attaching a sacrificing Al anode to the bio-anode, it effectively treated high load wastewater with energy recovery (maximum power density of 365.1 mW/m 3 and a maximum cell voltage of 0.97 V), and achieving high removals of COD (>99.4%), NH 4 + -N (>98.7%) and TP (>98.6%). The anode chamber contains microbes, activated carbon (AC)/graphite granules and Al anode. It was separated from the cathode chamber containing bifunctional catalytic and filtration membrane cathode (loaded with Fe/Mn/C/F/O catalyst) by a multi-medium chamber (MMC) filled with manganese sand and activated carbon granules, which replaced expensive PEM and reduced cost. An air contact oxidation bed for aeration was still adopted before liquid entering the cathode chamber. micro-electrolysis/electro-flocculation helps in achieving high removal efficiencies and contributes to membrane fouling migration. The increase of activated carbon in the separator MMC increased power generation and reduced system electric resistance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. An Integrated Rock Typing Approach for Unraveling the Reservoir Heterogeneity of Tight Sands in the Whicher Range Field of Perth Basin, Western Australia

    DEFF Research Database (Denmark)

    Ilkhchi, Rahim Kadkhodaie; Rezaee, Reza; Harami, Reza Moussavi

    2014-01-01

    Tight gas sands in Whicher Range Field of Perth Basin show large heterogeneity in reservoir characteristics and production behavior related to depositional and diagenetic features. Diagenetic events (compaction and cementation) have severely affected the pore system. In order to investigate...... the petrophysical characteristics, reservoir sandstone facies were correlated with core porosity and permeability and their equivalent well log responses to describe hydraulic flow units and electrofacies, respectively. Thus, very tight, tight, and sub-tight sands were differentiated. To reveal the relationship...... between pore system properties and depositional and diagenetic characteristics in each sand type, reservoir rock types were extracted. The identified reservoir rock types are in fact a reflection of internal reservoir heterogeneity related to pore system properties. All reservoir rock types...

  19. The water-quality monitoring program for the Baltimore reservoir system, 1981-2007—Description, review and evaluation, and framework integration for enhanced monitoring

    Science.gov (United States)

    Koterba, Michael T.; Waldron, Marcus C.; Kraus, Tamara E.C.

    2011-01-01

    The City of Baltimore, Maryland, and parts of five surrounding counties obtain their water from Loch Raven and Liberty Reservoirs. A third reservoir, Prettyboy, is used to resupply Loch Raven Reservoir. Management of the watershed conditions for each reservoir is a shared responsibility by agreement among City, County, and State jurisdictions. The most recent (2005) Baltimore Reservoir Watershed Management Agreement (RWMA) called for continued and improved water-quality monitoring in the reservoirs and selected watershed tributaries. The U.S. Geological Survey (USGS) conducted a retrospective review of the effectiveness of monitoring data obtained and analyzed by the RWMA jurisdictions from 1981 through 2007 to help identify possible improvements in the monitoring program to address RWMA water-quality concerns. Long-term water-quality concerns include eutrophication and sedimentation in the reservoirs, and elevated concentrations of (a) nutrients (nitrogen and phosphorus) being transported from the major tributaries to the reservoirs, (b) iron and manganese released from reservoir bed sediments during periods of deep-water anoxia, (c) mercury in higher trophic order game fish in the reservoirs, and (d) bacteria in selected reservoir watershed tributaries. Emerging concerns include elevated concentrations of sodium, chloride, and disinfection by-products (DBPs) in the drinking water from both supply reservoirs. Climate change and variability also could be emerging concerns, affecting seasonal patterns, annual trends, and drought occurrence, which historically have led to declines in reservoir water quality. Monitoring data increasingly have been used to support the development of water-quality models. The most recent (2006) modeling helped establish an annual sediment Total Maximum Daily Load to Loch Raven Reservoir, and instantaneous and 30-day moving average water-quality endpoints for chlorophyll-a (chl-a) and dissolved oxygen (DO) in Loch Raven and Prettyboy

  20. Cost effective material control and accountability training

    International Nuclear Information System (INIS)

    Robichaux, J.J.; Shull, L.M.; Salizzoni, L.M.

    1995-01-01

    DOE Order 5630.15, ''Safeguards and Security Training Program'' is being implemented at the Savannah River Site within the Westinghouse Savannah River Company's material control and accountability program. This paper reviews the development of a material control and accountability task analysis, the development of specific material control and accountability courses, and the cost effective and innovative strategies employed to implement the training program. The paper also discusses how the site material control and accountability policies and procedures are incorporated into the Westinghouse Savannah River Company training program to ensure that personnel receive the most current information

  1. Cost benefit analysis cost effectiveness analysis

    International Nuclear Information System (INIS)

    Lombard, J.

    1986-09-01

    The comparison of various protection options in order to determine which is the best compromise between cost of protection and residual risk is the purpose of the ALARA procedure. The use of decision-aiding techniques is valuable as an aid to selection procedures. The purpose of this study is to introduce two rather simple and well known decision aiding techniques: the cost-effectiveness analysis and the cost-benefit analysis. These two techniques are relevant for the great part of ALARA decisions which need the use of a quantitative technique. The study is based on an hypothetical case of 10 protection options. Four methods are applied to the data

  2. A cost effective CO2 strategy

    DEFF Research Database (Denmark)

    , a scenario-part and a cost-benefit part. Air and sea modes are not analyzed. The model adopts a bottom-up approach to allow a detailed assessment of transport policy measures. Four generic areas of intervention were identified and the likely effect on CO2 emissions, socioeconomic efficiency and other...... are evaluated according to CO2 reduction potential and according to the ‘shadow price’ on a reduction of one ton CO2. The shadow price reflects the costs (and benefits) of the different measures. Comparing the measures it is possible to identify cost effective measures, but these measures are not necessarily...... by the Ministry of Transport, with the Technical University of Denmark as one of the main contributors. The CO2-strategy was to be based on the principle of cost-effectiveness. A model was set up to assist in the assessment. The model consists of a projection of CO2-emissions from road and rail modes from 2020...

  3. On cost-effective communication network designing

    Science.gov (United States)

    Zhang, Guo-Qiang

    2010-02-01

    How to efficiently design a communication network is a paramount task for network designing and engineering. It is, however, not a single objective optimization process as perceived by most previous researches, i.e., to maximize its transmission capacity, but a multi-objective optimization process, with lowering its cost to be another important objective. These two objectives are often contradictive in that optimizing one objective may deteriorate the other. After a deep investigation of the impact that network topology, node capability scheme and routing algorithm as well as their interplays have on the two objectives, this letter presents a systematic approach to achieve a cost-effective design by carefully choosing the three designing aspects. Only when routing algorithm and node capability scheme are elegantly chosen can BA-like scale-free networks have the potential of achieving good tradeoff between the two objectives. Random networks, on the other hand, have the built-in character for a cost-effective design, especially when other aspects cannot be determined beforehand.

  4. Clinical evaluation based on cost-effectiveness

    International Nuclear Information System (INIS)

    Inoue, Takehiro; Inoue, Toshihiko

    1998-01-01

    We carried out two Phase III clinical trials using high dose rate (HDR) remote afterloading brachytherapy unit. We evaluated the clinical results based not only on the medical but also the economical standpoint. The first trial is the Phase III trial for cervical cancer treated with HDR or medium dose rate (MDR) intracavitary radiotherapy. The second one is the Phase III trial for tongue cancer treated with HDR or low dose rate (LDR) interstitial radiation. For cervical cancer, the survival rate of patients treated with HDR brachytherapy is the some as for LDR brachytherapy. The average total cost of treatment for the HDR group was 1.47 million yen, while that for the MDR group was 1.58 million yen. The average total admission days was 63. For tongue cancer, the local control rate of the HDR group is almost the same as that of the LDR groups. The average total cost for the HDR group was 780 thousand yen, and that for the LDR group was 830 thousand yen. The average total admission days was 34. According to the cost-effectiveness, HDR brachytherapy for cervical cancer has the same result as MDR, and HDR brachytherapy for tongue cancer has the same result as LDR. However, HDR can be treated without admission for patients who live near the hospital. HDR can be applied for these patients with less expense. We must be aware of not only the medical results but also the cost-effectiveness. (author)

  5. Deregulation and Nuclear Training: Cost Effective Alternatives

    International Nuclear Information System (INIS)

    Richard P. Coe; Patricia A. Lake

    2000-01-01

    Training is crucial to the success of any organization. It is also expensive, with some estimates exceeding $50 billion annually spent on training by U.S. corporations. Nuclear training, like that of many other highly technical organizations, is both crucial and costly. It is unlikely that the amount of training can be significantly reduced. If anything, current trends indicate that training needs will probably increase as the industry and workforce ages and changes. With the advent of energy deregulation in the United States, greater pressures will surface to make the costs of energy more cost-competitive. This in turn will drive businesses to more closely examine existing costs and find ways to do things in a more cost-effective way. The commercial nuclear industry will be no exception, and nuclear training will be equally affected. It is time for nuclear training and indeed the entire nuclear industry to begin using more aggressive techniques to reduce costs. This includes the need for nuclear training to find alternatives to traditional methods for the delivery of cost-effective high-quality training that meets regulatory requirements and produces well-qualified personnel capable of working in an efficient and safe manner. Computer-based and/or Web-based training are leading emerging technologies

  6. Cost-effective framework for basic surgical skills training.

    Science.gov (United States)

    Jiang, Deng-Jin; Wen, Chan; Yang, Ai-Jun; Zhu, Zhi-Li; Lei, Yan; Lan, Yang-Jun; Huang, Qing-Yuan; Hou, Xiao-Yu

    2013-06-01

    The importance of basic surgical skills is entirely agreed among surgical educators. However, restricted by ethical issues, finance etc, the basic surgical skills training is increasingly challenged. Increasing cost gives an impetus to the development of cost-effective training models to meet the trainees' acquisition of basic surgical skills. In this situation, a cost-effective training framework was formed in our department and introduced here. Each five students were assigned to a 'training unit'. The training was implemented weekly for 18 weeks. The framework consisted of an early, a transitional, an integrative stage and a surgical skills competition. Corresponding training modules were selected and assembled scientifically at each stage. The modules comprised campus intranet databases, sponge benchtop, nonliving animal tissue, local dissection specimens and simulating reality operations. The training outcomes used direct observation of procedural skills as an assessment tool. The training data of 50 trainees who were randomly selected in each year from 2006 to 2011 year, were retrospectively analysed. An excellent and good rate of the surgical skills is from 82 to 88%, but there is no significant difference among 6 years (P > 0.05). The skills scores of the contestants are markedly higher than those of non-contestants (P < 0.05). The average training cost per trainee is about $21.85-34.08. The present training framework is reliable, feasible, repeatable and cost-effective. The skills competition can promote to improve the surgical skills level of trainees. © 2012 The Authors. ANZ Journal of Surgery © 2012 Royal Australasian College of Surgeons.

  7. Integrated Approach Towards the Application of Horizontal Wells to Improve Waterflooding Performance

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, Mohan; Liner, Chris; Kerr, Dennis

    1999-10-15

    This final report describes the progress during the six year of the project on ''Integrated Approach Towards the Application of Horizontal Wells to Improve Waterflooding Performance.'' This report is funded under the Department of Energy's (DOE's) Class I program which is targeted towards improving the reservoir performance of mature oil fields located in fluvially-dominated deltaic deposits. The project involves using an integrated approach to characterize the reservoir followed by drilling of horizontal injection wells to improve production performance. The project was divided into two budget periods. In the first budget period, many modern technologies were used to develop a detailed reservoir management plan; whereas, in the second budget period, conventional data was used to develop a reservoir management plan. The idea was to determine the cost effectiveness of various technologies in improving the performance of mature oil fields.

  8. Cost-Effective Fuel Treatment Planning

    Science.gov (United States)

    Kreitler, J.; Thompson, M.; Vaillant, N.

    2014-12-01

    The cost of fighting large wildland fires in the western United States has grown dramatically over the past decade. This trend will likely continue with growth of the WUI into fire prone ecosystems, dangerous fuel conditions from decades of fire suppression, and a potentially increasing effect from prolonged drought and climate change. Fuel treatments are often considered the primary pre-fire mechanism to reduce the exposure of values at risk to wildland fire, and a growing suite of fire models and tools are employed to prioritize where treatments could mitigate wildland fire damages. Assessments using the likelihood and consequence of fire are critical because funds are insufficient to reduce risk on all lands needing treatment, therefore prioritization is required to maximize the effectiveness of fuel treatment budgets. Cost-effectiveness, doing the most good per dollar, would seem to be an important fuel treatment metric, yet studies or plans that prioritize fuel treatments using costs or cost-effectiveness measures are absent from the literature. Therefore, to explore the effect of using costs in fuel treatment planning we test four prioritization algorithms designed to reduce risk in a case study examining fuel treatments on the Sisters Ranger District of central Oregon. For benefits we model sediment retention and standing biomass, and measure the effectiveness of each algorithm by comparing the differences among treatment and no treat alternative scenarios. Our objective is to maximize the averted loss of net benefits subject to a representative fuel treatment budget. We model costs across the study landscape using the My Fuel Treatment Planner software, tree list data, local mill prices, and GIS-measured site characteristics. We use fire simulations to generate burn probabilities, and estimate fire intensity as conditional flame length at each pixel. Two prioritization algorithms target treatments based on cost-effectiveness and show improvements over those

  9. The Alphabet Soup of HIV Reservoir Markers.

    Science.gov (United States)

    Sharaf, Radwa R; Li, Jonathan Z

    2017-04-01

    Despite the success of antiretroviral therapy in suppressing HIV, life-long therapy is required to avoid HIV reactivation from long-lived viral reservoirs. Currently, there is intense interest in searching for therapeutic interventions that can purge the viral reservoir to achieve complete remission in HIV patients off antiretroviral therapy. The evaluation of such interventions relies on our ability to accurately and precisely measure the true size of the viral reservoir. In this review, we assess the most commonly used HIV reservoir assays, as a clear understanding of the strengths and weaknesses of each is vital for the accurate interpretation of results and for the development of improved assays. The quantification of intracellular or plasma HIV RNA or DNA levels remains the most commonly used tests for the characterization of the viral reservoir. While cost-effective and high-throughput, these assays are not able to differentiate between replication-competent or defective fractions or quantify the number of infected cells. Viral outgrowth assays provide a lower bound for the fraction of cells that can produce infectious virus, but these assays are laborious, expensive and substantially underestimate the potential reservoir of replication-competent provirus. Newer assays are now available that seek to overcome some of these problems, including full-length proviral sequencing, inducible HIV RNA assays, ultrasensitive p24 assays and murine adoptive transfer techniques. The development and evaluation of strategies for HIV remission rely upon our ability to accurately and precisely quantify the size of the remaining viral reservoir. At this time, all current HIV reservoir assays have drawbacks such that combinations of assays are generally needed to gain a more comprehensive view of the viral reservoir. The development of novel, rapid, high-throughput assays that can sensitively quantify the levels of the replication-competent HIV reservoir is still needed.

  10. Some Observations on Cost-Effectiveness Analysis in Education.

    Science.gov (United States)

    Geske, Terry G.

    1979-01-01

    The general nature of cost-effectiveness analysis is discussed, analytical frameworks for conducting cost-effectiveness studies are described, and some of the problems inherent in measuring educational costs and in assessing program effectiveness are addressed. (Author/IRT)

  11. OPCAB surgery is cost-effective for elderly patients

    DEFF Research Database (Denmark)

    Houlind, Kim Christian; Kjeldsen, Bo Juul; Madsen, Susanne Nørgaard

    2013-01-01

    To determine the cost-effective operative strategy for coronary artery bypass surgery in patients above 70 years.......To determine the cost-effective operative strategy for coronary artery bypass surgery in patients above 70 years....

  12. Understanding Cost-Effectiveness of Energy Efficiency Programs

    Science.gov (United States)

    Discusses the five standard tests used to assess the cost-effectiveness of energy efficiency, how states are using these tests, and how the tests can be used to determine the cost-effectiveness of energy efficiency measures.

  13. Designing cost effective water demand management programs in Australia.

    Science.gov (United States)

    White, S B; Fane, S A

    2002-01-01

    This paper describes recent experience with integrated resource planning (IRP) and the application of least cost planning (LCP) for the evaluation of demand management strategies in urban water. Two Australian case studies, Sydney and Northern New South Wales (NSW) are used in illustration. LCP can determine the most cost effective means of providing water services or alternatively the cheapest forms of water conservation. LCP contrasts to a traditional approach of evaluation which looks only at means of increasing supply. Detailed investigation of water usage, known as end-use analysis, is required for LCP. End-use analysis allows both rigorous demand forecasting, and the development and evaluation of conservation strategies. Strategies include education campaigns, increasing water use efficiency and promoting wastewater reuse or rainwater tanks. The optimal mix of conservation strategies and conventional capacity expansion is identified based on levelised unit cost. IRP uses LCP in the iterative process, evaluating and assessing options, investing in selected options, measuring the results, and then re-evaluating options. Key to this process is the design of cost effective demand management programs. IRP however includes a range of parameters beyond least economic cost in the planning process and program designs, including uncertainty, benefit partitioning and implementation considerations.

  14. Analysis of real-time reservoir monitoring : reservoirs, strategies, & modeling.

    Energy Technology Data Exchange (ETDEWEB)

    Mani, Seethambal S.; van Bloemen Waanders, Bart Gustaaf; Cooper, Scott Patrick; Jakaboski, Blake Elaine; Normann, Randy Allen; Jennings, Jim (University of Texas at Austin, Austin, TX); Gilbert, Bob (University of Texas at Austin, Austin, TX); Lake, Larry W. (University of Texas at Austin, Austin, TX); Weiss, Chester Joseph; Lorenz, John Clay; Elbring, Gregory Jay; Wheeler, Mary Fanett (University of Texas at Austin, Austin, TX); Thomas, Sunil G. (University of Texas at Austin, Austin, TX); Rightley, Michael J.; Rodriguez, Adolfo (University of Texas at Austin, Austin, TX); Klie, Hector (University of Texas at Austin, Austin, TX); Banchs, Rafael (University of Texas at Austin, Austin, TX); Nunez, Emilio J. (University of Texas at Austin, Austin, TX); Jablonowski, Chris (University of Texas at Austin, Austin, TX)

    2006-11-01

    The project objective was to detail better ways to assess and exploit intelligent oil and gas field information through improved modeling, sensor technology, and process control to increase ultimate recovery of domestic hydrocarbons. To meet this objective we investigated the use of permanent downhole sensors systems (Smart Wells) whose data is fed real-time into computational reservoir models that are integrated with optimized production control systems. The project utilized a three-pronged approach (1) a value of information analysis to address the economic advantages, (2) reservoir simulation modeling and control optimization to prove the capability, and (3) evaluation of new generation sensor packaging to survive the borehole environment for long periods of time. The Value of Information (VOI) decision tree method was developed and used to assess the economic advantage of using the proposed technology; the VOI demonstrated the increased subsurface resolution through additional sensor data. Our findings show that the VOI studies are a practical means of ascertaining the value associated with a technology, in this case application of sensors to production. The procedure acknowledges the uncertainty in predictions but nevertheless assigns monetary value to the predictions. The best aspect of the procedure is that it builds consensus within interdisciplinary teams The reservoir simulation and modeling aspect of the project was developed to show the capability of exploiting sensor information both for reservoir characterization and to optimize control of the production system. Our findings indicate history matching is improved as more information is added to the objective function, clearly indicating that sensor information can help in reducing the uncertainty associated with reservoir characterization. Additional findings and approaches used are described in detail within the report. The next generation sensors aspect of the project evaluated sensors and packaging

  15. Design And Implementation Of Cost Effective Inverter

    Directory of Open Access Journals (Sweden)

    Niaz Morshedul Haque

    2017-10-01

    Full Text Available This paper deals with the design and construct of a 100 Watt 220 Volt and 50 Hz Inverter. The system is designed without any microcontroller and it has a cost-effective design architecture. The elementary purpose of this device is to transmute 12 V DC to 220 V AC. Snubber technology is used to diminish the reverse potential transients and excessive heat of transformer winding and transistor switches. Switching pulse generated by NE 555 timer circuit and comparator circuit was used to take signal strength input from its rear as well as from both sides for triggering the MOSFET switches. Another switch is used to invert pulse between two switching circuitries. A 5 volts regulator IC 7805 was used to supply fixed 5V for biasing the switching and amplifying circuitry.

  16. Custom LSI plus hybrid equals cost effectiveness

    Science.gov (United States)

    Friedman, S. N.

    The possibility to combine various technologies, such as Bi-Polar linear and CMOS/Digital makes it feasible to create systems with a tailored performance not available on a single monolithic circuit. The custom LSI 'BLOCK', especially if it is universal in nature, is proving to be a cost effective way for the developer to improve his product. The custom LSI represents a low price part in contrast to the discrete components it will replace. In addition, the hybrid assembly can realize a savings in labor as a result of the reduced parts handling and associated wire bonds. The possibility of the use of automated system manufacturing techniques leads to greater reliability as the human factor is partly eliminated. Attention is given to reliability predictions, cost considerations, and a product comparison study.

  17. Cost effectiveness of transportation fuels from biomass

    International Nuclear Information System (INIS)

    De Jager, D.; Faaij, A.P.C.; Troelstra, W.P.

    1998-06-01

    The aim of the study on the title subject was to investigate whether stimulation of the production and use of biofuels for transportation is worthwhile compared to the production of electricity from biomass. Several options are compared to each other and with reference technologies on the basis of the consumption or the avoided input of fossil fuels, emissions of greenhouse gases, specific costs and cost effectiveness. For each phase in the biomass conversion process (cultivation, pretreatment, transportation, conversion, distribution and final consumption) indicators were collected from the literature. Next to costs of the bioconversion routes attention is paid to other relevant aspects that are important for the introduction of the technological options in the Netherlands. 41 refs

  18. Exploring cost-effective maize integrated weed management ...

    African Journals Online (AJOL)

    ACSS

    and Investment Plan 2011-2015 (DSIP,. 2010), whose increase in .... 11.9b. 169.6a. 16.1b. 18.4a. 4.9a. 2.7b. Pre-Atz+1hh. 253 ab. 13.3ab. 175.3a. 17.0ab. 18.2a. 0.6c ... *ROI (%) costs (U.shs ha-1) from maize sales (U.shs ha-1). (U.shs ha-1).

  19. 10 CFR 455.63 - Cost-effectiveness testing.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Cost-effectiveness testing. 455.63 Section 455.63 Energy..., Hospitals, Units of Local Government, and Public Care Institutions § 455.63 Cost-effectiveness testing. (a... paragraph (a) of this section, if the State plan requires the cost effectiveness of an energy conservation...

  20. 10 CFR 436.18 - Measuring cost-effectiveness.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Measuring cost-effectiveness. 436.18 Section 436.18 Energy... Procedures for Life Cycle Cost Analyses § 436.18 Measuring cost-effectiveness. (a) In accordance with this section, each Federal agency shall measure cost-effectiveness by combining cost data established under...

  1. 42 CFR 457.1015 - Cost-effectiveness.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Cost-effectiveness. 457.1015 Section 457.1015... Waivers: General Provisions § 457.1015 Cost-effectiveness. (a) Definition. For purposes of this subpart... may demonstrate cost-effectiveness by comparing the cost of coverage for the family to the cost of...

  2. 49 CFR 639.21 - Determination of cost-effectiveness.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Determination of cost-effectiveness. 639.21... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CAPITAL LEASES Cost-Effectiveness § 639.21 Determination of cost...-effectiveness comparison as described in this subpart, it may ask FTA to approve an alternate form of cost...

  3. Cost-effectiveness analysis of microdose clinical trials in drug development.

    Science.gov (United States)

    Yamane, Naoe; Igarashi, Ataru; Kusama, Makiko; Maeda, Kazuya; Ikeda, Toshihiko; Sugiyama, Yuichi

    2013-01-01

    Microdose (MD) clinical trials have been introduced to obtain human pharmacokinetic data early in drug development. Here we assessed the cost-effectiveness of microdose integrated drug development in a hypothetical model, as there was no such quantitative research that weighed the additional effectiveness against the additional time and/or cost. First, we calculated the cost and effectiveness (i.e., success rate) of 3 types of MD integrated drug development strategies: liquid chromatography-tandem mass spectrometry, accelerator mass spectrometry, and positron emission tomography. Then, we analyzed the cost-effectiveness of 9 hypothetical scenarios where 100 drug candidates entering into a non-clinical toxicity study were selected by different methods as the conventional scenario without MD. In the base-case, where 70 drug candidates were selected without MD and 30 selected evenly by one of the three MD methods, incremental cost-effectiveness ratio per one additional drug approved was JPY 12.7 billion (US$ 0.159 billion), whereas the average cost-effectiveness ratio of the conventional strategy was JPY 24.4 billion, which we set as a threshold. Integrating MD in the conventional drug development was cost-effective in this model. This quantitative analytical model which allows various modifications according to each company's conditions, would be helpful for guiding decisions early in clinical development.

  4. Reflection Phenomena in Underground Pumped Storage Reservoirs

    Directory of Open Access Journals (Sweden)

    Elena Pummer

    2018-04-01

    Full Text Available Energy storage through hydropower leads to free surface water waves in the connected reservoirs. The reason for this is the movement of water between reservoirs at different elevations, which is necessary for electrical energy storage. Currently, the expansion of renewable energies requires the development of fast and flexible energy storage systems, of which classical pumped storage plants are the only technically proven and cost-effective technology and are the most used. Instead of classical pumped storage plants, where reservoirs are located on the surface, underground pumped storage plants with subsurface reservoirs could be an alternative. They are independent of topography and have a low surface area requirement. This can be a great advantage for energy storage expansion in case of environmental issues, residents’ concerns and an unusable terrain surface. However, the reservoirs of underground pumped storage plants differ in design from classical ones for stability and space reasons. The hydraulic design is essential to ensure their satisfactory hydraulic performance. The paper presents a hybrid model study, which is defined here as a combination of physical and numerical modelling to use the advantages and to compensate for the disadvantages of the respective methods. It shows the analysis of waves in ventilated underground reservoir systems with a great length to height ratio, considering new operational aspects from energy supply systems with a great percentage of renewable energies. The multifaceted and narrow design of the reservoirs leads to complex free surface flows; for example, undular and breaking bores arise. The results show excessive wave heights through wave reflections, caused by the impermeable reservoir boundaries. Hence, their knowledge is essential for a successful operational and constructive design of the reservoirs.

  5. Cost effectiveness of recycling: A systems model

    Energy Technology Data Exchange (ETDEWEB)

    Tonjes, David J., E-mail: david.tonjes@stonybrook.edu [Department of Technology and Society, College of Engineering and Applied Sciences, Stony Brook University, Stony Brook, NY 11794-3560 (United States); Waste Reduction and Management Institute, School of Marine and Atmospheric Sciences, Stony Brook University, Stony Brook, NY 11794-5000 (United States); Center for Bioenergy Research and Development, Advanced Energy Research and Technology Center, Stony Brook University, 1000 Innovation Rd., Stony Brook, NY 11794-6044 (United States); Mallikarjun, Sreekanth, E-mail: sreekanth.mallikarjun@stonybrook.edu [Department of Technology and Society, College of Engineering and Applied Sciences, Stony Brook University, Stony Brook, NY 11794-3560 (United States)

    2013-11-15

    Highlights: • Curbside collection of recyclables reduces overall system costs over a range of conditions. • When avoided costs for recyclables are large, even high collection costs are supported. • When avoided costs for recyclables are not great, there are reduced opportunities for savings. • For common waste compositions, maximizing curbside recyclables collection always saves money. - Abstract: Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.

  6. Cost-effectiveness of the HIT programme in patients with schizophrenia and persistent auditory hallucinations

    NARCIS (Netherlands)

    Stant, AD; TenVergert, EM; Groen, H; Jenner, JA; Nienhuis, FJ; van de Willige, G; Wiersma, D

    Objective: To examine the cost-effectiveness of Hallucination focused Integrative Treatment (HIT) in patients with schizophrenia and a history of persistent auditory hallucinations. Method: Costs, in and outside the health care sector, and outcomes were registered prospectively during a period of 18

  7. A Cost Effective System Design Approach for Critical Space Systems

    Science.gov (United States)

    Abbott, Larry Wayne; Cox, Gary; Nguyen, Hai

    2000-01-01

    NASA-JSC required an avionics platform capable of serving a wide range of applications in a cost-effective manner. In part, making the avionics platform cost effective means adhering to open standards and supporting the integration of COTS products with custom products. Inherently, operation in space requires low power, mass, and volume while retaining high performance, reconfigurability, scalability, and upgradability. The Universal Mini-Controller project is based on a modified PC/104-Plus architecture while maintaining full compatibility with standard COTS PC/104 products. The architecture consists of a library of building block modules, which can be mixed and matched to meet a specific application. A set of NASA developed core building blocks, processor card, analog input/output card, and a Mil-Std-1553 card, have been constructed to meet critical functions and unique interfaces. The design for the processor card is based on the PowerPC architecture. This architecture provides an excellent balance between power consumption and performance, and has an upgrade path to the forthcoming radiation hardened PowerPC processor. The processor card, which makes extensive use of surface mount technology, has a 166 MHz PowerPC 603e processor, 32 Mbytes of error detected and corrected RAM, 8 Mbytes of Flash, and I Mbytes of EPROM, on a single PC/104-Plus card. Similar densities have been achieved with the quad channel Mil-Std-1553 card and the analog input/output cards. The power management built into the processor and its peripheral chip allows the power and performance of the system to be adjusted to meet the requirements of the application, allowing another dimension to the flexibility of the Universal Mini-Controller. Unique mechanical packaging allows the Universal Mini-Controller to accommodate standard COTS and custom oversized PC/104-Plus cards. This mechanical packaging also provides thermal management via conductive cooling of COTS boards, which are typically

  8. Statin cost effectiveness in primary prevention: A systematic review of the recent cost-effectiveness literature in the United States

    Directory of Open Access Journals (Sweden)

    Mitchell Aaron P

    2012-07-01

    Full Text Available Abstract Background The literature on the cost-effectiveness of statin drugs in primary prevention of coronary heart disease is complex. The objective of this study is to compare the disparate results of recent cost-effectiveness analyses of statins. Findings We conducted a systematic review of the literature on statin cost-effectiveness. The four studies that met inclusion criteria reported varying conclusions about the cost-effectiveness of statin treatment, without a clear consensus as to whether statins are cost-effective for primary prevention. However, after accounting for each study’s assumptions about statin costs, we found substantial agreement among the studies. Studies that assumed statins to be more expensive found them to be less cost-effective, and vice-versa. Furthermore, treatment of low-risk groups became cost-effective as statins became less expensive. Conclusions Drug price is the primary determinant of statin cost-effectiveness within a given risk group. As more statin drugs become generic, patients at low risk for coronary disease may be treated cost-effectively. Though many factors must be weighed in any medical decision, from a cost-effectiveness perspective, statins may now be considered an appropriate therapy for many patients at low risk for heart disease.

  9. 3D Reservoir Modeling of Semutang Gas Field: A lonely Gas field in Chittagong-Tripura Fold Belt, with Integrated Well Log, 2D Seismic Reflectivity and Attributes.

    Science.gov (United States)

    Salehin, Z.; Woobaidullah, A. S. M.; Snigdha, S. S.

    2015-12-01

    Bengal Basin with its prolific gas rich province provides needed energy to Bangladesh. Present energy situation demands more Hydrocarbon explorations. Only 'Semutang' is discovered in the high amplitude structures, where rest of are in the gentle to moderate structures of western part of Chittagong-Tripura Fold Belt. But it has some major thrust faults which have strongly breached the reservoir zone. The major objectives of this research are interpretation of gas horizons and faults, then to perform velocity model, structural and property modeling to obtain reservoir properties. It is needed to properly identify the faults and reservoir heterogeneities. 3D modeling is widely used to reveal the subsurface structure in faulted zone where planning and development drilling is major challenge. Thirteen 2D seismic and six well logs have been used to identify six gas bearing horizons and a network of faults and to map the structure at reservoir level. Variance attributes were used to identify faults. Velocity model is performed for domain conversion. Synthetics were prepared from two wells where sonic and density logs are available. Well to seismic tie at reservoir zone shows good match with Direct Hydrocarbon Indicator on seismic section. Vsh, porosity, water saturation and permeability have been calculated and various cross plots among porosity logs have been shown. Structural modeling is used to make zone and layering accordance with minimum sand thickness. Fault model shows the possible fault network, those liable for several dry wells. Facies model have been constrained with Sequential Indicator Simulation method to show the facies distribution along the depth surfaces. Petrophysical models have been prepared with Sequential Gaussian Simulation to estimate petrophysical parameters away from the existing wells to other parts of the field and to observe heterogeneities in reservoir. Average porosity map for each gas zone were constructed. The outcomes of the research

  10. Effects of the discharge of uranium mining effluents on the water quality of the reservoir: an integrative chemical and ecotoxicological assessment

    OpenAIRE

    Ferrari, Carla Rolim; do Nascimento, Heliana de Azevedo Franco; Rodgher, Suzelei; Almeida, Tito; Bruschi, Armando Luiz; Nascimento, Marcos Roberto Lopes do; Bonifácio, Rodrigo Leandro

    2017-01-01

    The water quality of the Antas reservoir, under the influence of treated effluents from a uranium mining area Ore Treatment Unit (UTM) with acid mine drainage, was investigated. Samples were collected every 3 months from the Antas reservoir (CAB, P41-E and P14) and from the UTM (P41-S). Chemical and acute 48 h toxicity tests using Ceriodaphnia silvestrii and Daphnia magna analyses were carried out to determine the potential environmental risks due to discharging the uranium mine effluents int...

  11. Cost-effectiveness, feed utilization and body composition of african ...

    African Journals Online (AJOL)

    Cost-effectiveness, feed utilization and body composition of african sharptooth catfish ( Clarias gariepinus , Burchell 1822) fingerlings fed locally formulated and commercial pelleted diets in tarpaulin tanks.

  12. Cost-effectiveness analysis of radon remediation in schools

    International Nuclear Information System (INIS)

    Kennedy, C.A.; Gray, A.M.

    2000-01-01

    Indoor radon is an important source of radiation dosage in the general population and has been recognised as a world-wide environmental and public health challenge. Governments in many Western and Eastern European and North American countries are undertaking active radon-risk reduction policies, including the remediation of existing residential and work place building stocks (1). These endeavours include a priority of remediating school buildings. Epidemiological and technical radon research has produced information which has enabled attention to be turned to specific effectiveness and optimisation questions regarding radon identification and remediation programmes in buildings, including schools. Decision making about policy implementation has been an integral part of these programmes and questions have been raised about the economic implications of the regulations and optimisation strategies for workplace action level policy (2,3). (the action level applied to schools is 400 Bq m -3 ). No previous study has estimated the cost-effectiveness of a radon remediation programme for schools using the methodological framework now considered appropriate in the economic evaluation of health interventions. It is imperative that this should be done, in order that the resources required to obtain health gain from radon remediation in schools can be systematically compared with equivalent data for other health interventions and radon remediation programmes. In this study a cost-effectiveness analysis of radon remediation in schools was undertaken, using the best available national data and information from Northamptonshire on the costs and effectiveness of radon identification and remediation in schools, and the costs and health impact of lung cancer cases. A model based on data from Northamptonshire is presented (where 6.3% of residential stock is over 200 Bq m -3 ). The resultant cost-effectiveness ratio was pound 7,550 per life year gained in pound 1997. Results from the

  13. Cost effectiveness of haemophilia treatment : a cross-national assessment

    NARCIS (Netherlands)

    Lippert, B; Berger, K; Berntorp, E; Giangrande, P; van den Berg, M; Schramm, W; Siebert, U

    2005-01-01

    The aim of this study was to assess the incremental cost effectiveness of on-demand versus prophylactic haemophilia therapy in Germany, Sweden, the United Kingdom and The Netherlands from the third-party payers' perspective. Using a decision tree model, the cost effectiveness of on-demand versus

  14. Cost-effectiveness of antiplatelet drugs after percutaneous coronary intervention.

    Science.gov (United States)

    Wisløff, Torbjørn; Atar, Dan

    2016-01-01

    Clopidogrel has, for long time, been accepted as the standard treatment for patients who have undergone a percutaneous coronary intervention (PCI). The introduction of prasugrel-and more recently, ticagrelor-has introduced a decision-making problem for clinicians and governments worldwide: to use the cheaper clopidogrel or the more effective, and also more expensive prasugrel or ticagrelor. We aim to give helpful contributions to this debate by analysing the cost-effectiveness of clopidogrel, prasugrel, and ticagrelor compared with each other. We modified a previously developed Markov model of cardiac disease progression. In the model, we followed up cohorts of patients who have recently had a PCI until 100 years or death. Possible events are revascularization, bleeding, acute myocardial infarction, and death. Our analysis shows that ticagrelor is cost-effective in 77% of simulations at an incremental cost-effectiveness ratio of €7700 compared with clopidogrel. Ticagrelor was also cost-effective against prasugrel at a cost-effectiveness ratio of €7800. Given a Norwegian cost-effectiveness threshold of €70 000, both comparisons appear to be clearly cost-effective in favour of ticagrelor. Ticagrelor is cost-effective compared with both clopidogrel and prasugrel for patients who have undergone a PCI.

  15. Cost effectiveness of Tuberculosis Treatment from the Patients ...

    African Journals Online (AJOL)

    ... Directly Observed Treatment Short course is more cost effective from the patients' point of view. DOTS needs to be re-focused out of the hospitals and clinics and made community based in view of the increasing TB caseload occasioned by HI V/AIDS. Key Words: Cost effectiveness, Tuberculosis treatment, personal cost, ...

  16. Index method for analyzing cost effectiveness of drilling rigs

    Energy Technology Data Exchange (ETDEWEB)

    Batura, N P; Bocharov, V V

    1978-01-01

    The method for a complete analysis of the factors determining cost effectiveness of a drilling rig fleet is examined. The system of calculating production indexes from statistical reports is relatively simple and is not difficult to use for production organizations. The analytical results may be used to develop actual measures used to increase cost effectiveness of drilling operations.

  17. The Cost-Effectiveness of NBPTS Teacher Certification

    Science.gov (United States)

    Yeh, Stuart S.

    2010-01-01

    A cost-effectiveness analysis of the National Board for Professional Teaching Standards (NBPTS) program suggests that Board certification is less cost-effective than a range of alternative approaches for raising student achievement, including comprehensive school reform, class size reduction, a 10% increase in per pupil expenditure, the use of…

  18. 10 CFR 436.13 - Presuming cost-effectiveness results.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Presuming cost-effectiveness results. 436.13 Section 436... Methodology and Procedures for Life Cycle Cost Analyses § 436.13 Presuming cost-effectiveness results. (a) If the investment and other costs for an energy or water conservation measure considered for retrofit to...

  19. Costs and cost-effectiveness of periviable care.

    Science.gov (United States)

    Caughey, Aaron B; Burchfield, David J

    2014-02-01

    With increasing concerns regarding rapidly expanding healthcare costs, cost-effectiveness analysis allows assessment of whether marginal gains from new technology are worth the increased costs. Particular methodologic issues related to cost and cost-effectiveness analysis in the area of neonatal and periviable care include how costs are estimated, such as the use of charges and whether long-term costs are included; the challenges of measuring utilities; and whether to use a maternal, neonatal, or dual perspective in such analyses. A number of studies over the past three decades have examined the costs and the cost-effectiveness of neonatal and periviable care. Broadly, while neonatal care is costly, it is also cost effective as it produces both life-years and quality-adjusted life-years (QALYs). However, as the gestational age of the neonate decreases, the costs increase and the cost-effectiveness threshold is harder to achieve. In the periviable range of gestational age (22-24 weeks of gestation), whether the care is cost effective is questionable and is dependent on the perspective. Understanding the methodology and salient issues of cost-effectiveness analysis is critical for researchers, editors, and clinicians to accurately interpret results of the growing body of cost-effectiveness studies related to the care of periviable pregnancies and neonates. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. ORIGINAL ARTICLES Cost-effectiveness analysis for priority-setting ...

    African Journals Online (AJOL)

    health outcomes and wasted resources.4-5 It was found that the cost- effectiveness of South ... Priorities for Developing Countries Project was that emergency (and even some elective) ... to control air pollutants found that in South Africa the most cost- effective ..... outdoor air pollution in South Africa in 2000. S Afr Med J ...

  1. SILTATION IN RESERVOIRS

    African Journals Online (AJOL)

    Keywords: reservoir model, siltation, sediment, catchment, sediment transport. 1. Introduction. Sediment ... rendered water storage structures useless in less than 25 years. ... reservoir, thus reducing the space available for water storage and ...

  2. Reservoir fisheries of Asia

    International Nuclear Information System (INIS)

    Silva, S.S. De.

    1990-01-01

    At a workshop on reservoir fisheries research, papers were presented on the limnology of reservoirs, the changes that follow impoundment, fisheries management and modelling, and fish culture techniques. Separate abstracts have been prepared for three papers from this workshop

  3. Large reservoirs: Chapter 17

    Science.gov (United States)

    Miranda, Leandro E.; Bettoli, Phillip William

    2010-01-01

    Large impoundments, defined as those with surface area of 200 ha or greater, are relatively new aquatic ecosystems in the global landscape. They represent important economic and environmental resources that provide benefits such as flood control, hydropower generation, navigation, water supply, commercial and recreational fisheries, and various other recreational and esthetic values. Construction of large impoundments was initially driven by economic needs, and ecological consequences received little consideration. However, in recent decades environmental issues have come to the forefront. In the closing decades of the 20th century societal values began to shift, especially in the developed world. Society is no longer willing to accept environmental damage as an inevitable consequence of human development, and it is now recognized that continued environmental degradation is unsustainable. Consequently, construction of large reservoirs has virtually stopped in North America. Nevertheless, in other parts of the world construction of large reservoirs continues. The emergence of systematic reservoir management in the early 20th century was guided by concepts developed for natural lakes (Miranda 1996). However, we now recognize that reservoirs are different and that reservoirs are not independent aquatic systems inasmuch as they are connected to upstream rivers and streams, the downstream river, other reservoirs in the basin, and the watershed. Reservoir systems exhibit longitudinal patterns both within and among reservoirs. Reservoirs are typically arranged sequentially as elements of an interacting network, filter water collected throughout their watersheds, and form a mosaic of predictable patterns. Traditional approaches to fisheries management such as stocking, regulating harvest, and in-lake habitat management do not always produce desired effects in reservoirs. As a result, managers may expend resources with little benefit to either fish or fishing. Some locally

  4. Cost-effective analysis of PET application in NSCLC

    International Nuclear Information System (INIS)

    Gu Aichun; Liu Jianjun; Sun Xiaoguang; Shi Yiping; Huang Gang

    2006-01-01

    Objective: To evaluate the cost-effectiveness of PET and CT application for diagnosis of non-small cell lung cancer (NSCLC) in China. Methods: Using decision analysis method the diagnostic efficiency of PET and CT for diagnosis of NSCLC in china was analysed. And also the value of cost for accurate diagnosis (CAD), cost for accurate staging (CAS) and cost for effective therapy (CAT) was calculated. Results: (1) For the accurate diagnosis, CT was much more cost-effective than PET. (2) For the accurate staging, CT was still more cost-effective than PET. (3) For the all over diagnostic and therapeutic cost, PET was more cost-effective than CT. (4) The priority of PET to CT was for the diagnosis of stage I NSCLC. Conclusion: For the management of NSCLC patient in China, CT is more cost-effective for screening, whereas PET for clinical staging and monitoring therapeutic effect. (authors)

  5. Integrated Water Basin Management Including a Large Pit Lake and a Water Supply Reservoir: The Mero-Barcés Basin

    Science.gov (United States)

    Delgado, Jordi; Juncosa-Rivera, Ricardo; Hernández-Anguiano, Horacio; Muñoz-Ibáñez, Andrea

    2016-04-01

    Water resource managers attempt to minimize conflicts among users, preserve the environment as much as possible, and satisfy user necessities at a minimum cost. Several European directives indirectly address mine restoration policies, with a goal of minimizing negative impacts and adding social and environmental value where possible. Water management must consider water sources, ecological flows, flood control, and variability in the demands for urban, industrial, and agricultural uses. In the context of the present study, the city of A Coruña is located in Galicia (NW Spain). The water supply system for this city and surrounding municipalities (~400.000 inhabitants) is based on the Abegondo-Cecebre reservoir. In cases when precipitation is scarce (e.g. no rain for more than seven consecutive months) and there is a seasonal increase in demand significantly stress the supply system so that, as occurred in 2010, shortages and water supply restrictions need to be considered. This is a clear indication of that, at present, the Abegondo-Cecebre reservoir has not enough capacity to cope with a scenario of increasing water demand (due to the vegetative and seasonal increase of population) and hydric stress likely connected with the widely acknowledged climate change. In the present context of monetary resources scarcity and society concern with respect large new public work projects, the construction of a new dam is challenging. However the opportunity provided by the recent flooding of the Meirama open pit (a large mine void that has been forced-flooded for its reclamation and it is located in the headwaters of one of the rivers draining towards the Abegondo-Cecebre reservoir) proves to be a significant new asset that will help to improve the future water management scenarios under the acknowledged uncertain conditions. In this study we have studied in detail the hydrochemistry of the affected systems (lake, river and reservoir) in order to make clear whether or not the

  6. RJD A Cost Effective Frackless Solution For Production Enhancement In Marginal Fields

    Directory of Open Access Journals (Sweden)

    Ahmed Kamel

    2017-02-01

    Full Text Available With the worldwide trend of low oil prices high maturity of oil fields excessive cost of horizontal and fracking technologies and necessity for green drilling applications radial jet drilling RJD technology can be a cost effective and environmentally-friendly alternative. RJD is an unconventional drilling technique that utilizes coiled tubing conveyed tools and the energy of high velocity jet fluids to drill laterals inside the reservoir. In recent years rapid advances in high pressure water jet technology has tremendously increased its application in oil and gas industry not only in drilling operations to improve drilling rate and reduce drilling cost but also in production to maximize hydrocarbon recovery. In addition RJD can be used to bypass near wellbore damage direct reservoir treatmentsinjections improve water disposal and re-injection rates and assist in steam or CO2 treatments. This paper highlights the theoretical basis technological advancement procedures applications and challenges of high pressure water jets. Several worldwide case studies are discussed to evaluate the success results pros and cons of RJD. The results show that nearly an average of four to five fold production increase can be obtained. The present paper clearly shows that radial jet drilling is a viable and attractive alternative in marginal and small reservoirs that still have significant oil in place to capture the benefits of horizontal drillingfracking and to improve productivity from both new wells andor workover wells that cannot be produced with the existing expensive conventional completions.

  7. Use of XML and Java for collaborative petroleum reservoir modeling on the Internet

    Science.gov (United States)

    Victorine, J.; Watney, W.L.; Bhattacharya, S.

    2005-01-01

    The GEMINI (Geo-Engineering Modeling through INternet Informatics) is a public-domain, web-based freeware that is made up of an integrated suite of 14 Java-based software tools to accomplish on-line, real-time geologic and engineering reservoir modeling. GEMINI facilitates distant collaborations for small company and academic clients, negotiating analyses of both single and multiple wells. The system operates on a single server and an enterprise database. External data sets must be uploaded into this database. Feedback from GEMINI users provided the impetus to develop Stand Alone Web Start Applications of GEMINI modules that reside in and operate from the user's PC. In this version, the GEMINI modules run as applets, which may reside in local user PCs, on the server, or Java Web Start. In this enhanced version, XML-based data handling procedures are used to access data from remote and local databases and save results for later access and analyses. The XML data handling process also integrates different stand-alone GEMINI modules enabling the user(s) to access multiple databases. It provides flexibility to the user to customize analytical approach, database location, and level of collaboration. An example integrated field-study using GEMINI modules and Stand Alone Web Start Applications is provided to demonstrate the versatile applicability of this freeware for cost-effective reservoir modeling. ?? 2005 Elsevier Ltd. All rights reserved.

  8. A cost-effective simulation curriculum for preclinical endodontics.

    Science.gov (United States)

    Pileggi, Roberta; Glickman, Gerald N

    2004-02-01

    A challenge in contemporary dental education is to achieve a smooth transition from preclinical teaching environments to patient-care clinics in a cost-effective manner. The preclinical endodontic courses at The University of Texas, Dental Branch at Houston provide a unique learning environment that enables the student to perform endodontic treatment on extracted teeth in a typodont, and be involved in diagnosis and treatment-planning discussions. The specially designed stone typodont used has built-in radiographic capability, and is mounted at each chair in the clinic. During each preclinical session, students are assigned clinical cubicles and proper aseptic protocol is followed. Students are required to wear gloves, masks and eyewear, and place a rubber dam during treatment. Written self-assessment evaluations based upon prescribed criteria are utilised; feedback is given by faculty composed of both full-time endodontists and graduate students who periodically rotate and are calibrated on a regular basis. In the lecture phase, clinical case scenarios are presented to reinforce concepts of diagnosis and emergency care and to help integrate endodontics with other disciplines; a Socratic-like teaching style is established by the faculty facilitator to create an environment for developing critical-thinking and problem-solving skills. The overall feedback from graduating students has been very positive. Advantages of this format are an easier transition to patient management, a more keen interest in specialsation and a perceived increase in levels of confidence.

  9. Mobile liquid VR system: a cost effective alternative

    International Nuclear Information System (INIS)

    Soto, R.; Harkins, R.; HPD, Inc., Naperville, IL)

    1985-01-01

    The need for cost effective alternatives to treat large volumes of liquid radwaste has never been more evident. As part of a continuing effort to introduce such alternatives, HPD, Inc., and Chem-Nuclear Systems, Inc., have integrated two proven state-of-the-art technologies to offer a mobile liquid volume reduction system that satisfies nuclear industry requirements, with respect to liquid radwaste handling. This system optimizes proven technology by employing a crystallizer unit to concentrate the waste liquids to 50 weight percent solids, thereby reducing the volume to be solidified by factors of 40, while using only 20 percent of the energy required by conventional evaporative systems. In addition, the system employs a field proven cement solidification process which has been accepted in a Topical Report by the US NRC and which offers the highest waste to container volume ratios for stable waste forms in the industry. This volume reduction-solidification system is able to reduce over 7000 gallons of liquid waste per day to less than 30 cubic feet of 10CFR61 certified stable solidified waste for ultimate disposal or on-site storage. This document describes the GEODE System; its applicability; economics; volume reduction; scope of responsibility and experience. Major benefits include higher VR factors; assurance of continual regulatory compliance; and no capital investment

  10. Cost effectiveness of in situ bioremediation at Savannah River

    International Nuclear Information System (INIS)

    Saaty, R.P.; Showalter, W.E.; Booth, S.R.

    1995-01-01

    In situ bioremediation (ISBR) is an innovative new remediation technology for the removal of chlorinated solvents from contaminated soils and groundwater. The principal contaminant at the Savannah River Integrated Demonstration is tricloroethylene (TCE) a volatile organic compound (VOC). A 384-day test run at Savannah River, sponsored by the US Department of Energy (DOE), Office of Technology Development (EM-50), furnished information about the performance and applications of ISBR. In situ bioremediation, as tested, is based on two distinct processes occurring simultaneously; the physical process of in situ air stripping and the biological process of bioremediation. Both processes have the potential to remediate some amount of contamination. A quantity of VOCs, directly measured from the extracted airstream, was removed from the test area by the physical process of air stripping. The biological process is difficult to examine. However, the results of several tests performed at the SRID and independent numerical modeling determined that the biological process remediated an additional 40% above the physical process. Given these data, the cost effectiveness of this new technology can be evaluated

  11. Naturally fractured reservoirs: Optimized E and P strategies using a reaction-transport-mechanical simulator in an integrated approach. Annual report, 1996--1997

    Energy Technology Data Exchange (ETDEWEB)

    Hoak, T.; Jenkins, R. [Science Applications International Corp., McLean, VA (United States); Ortoleva, P.; Ozkan, G.; Shebl, M.; Sibo, W.; Tuncay, K. [Laboratory for Computational Geodynamics (United States); Sundberg, K. [Phillips Petroleum Company (United States)

    1998-07-01

    The methodology and results of this project are being tested using the Andector-Goldsmith Field in the Permian Basin, West Texas. The study area includes the Central Basin Platform and the Midland Basin. The Andector-Goldsmith Field lies at the juncture of these two zones in the greater West Texas Permian Basin. Although the modeling is being conducted in this area, the results have widespread applicability to other fractured carbonate and other reservoirs throughout the world.

  12. Comparative costs and cost-effectiveness of behavioural interventions as part of HIV prevention strategies.

    Science.gov (United States)

    Hsu, Justine; Zinsou, Cyprien; Parkhurst, Justin; N'Dour, Marguerite; Foyet, Léger; Mueller, Dirk H

    2013-01-01

    Behavioural interventions have been widely integrated in HIV/AIDS social marketing prevention strategies and are considered valuable in settings with high levels of risk behaviours and low levels of HIV/AIDS awareness. Despite their widespread application, there is a lack of economic evaluations comparing different behaviour change communication methods. This paper analyses the costs to increase awareness and the cost-effectiveness to influence behaviour change for five interventions in Benin. Cost and cost-effectiveness analyses used economic costs and primary effectiveness data drawn from surveys. Costs were collected for provider inputs required to implement the interventions in 2009 and analysed by 'person reached'. Cost-effectiveness was analysed by 'person reporting systematic condom use'. Sensitivity analyses were performed on all uncertain variables and major assumptions. Cost-per-person reached varies by method, with public outreach events the least costly (US$2.29) and billboards the most costly (US$25.07). Influence on reported behaviour was limited: only three of the five interventions were found to have a significant statistical correlation with reported condom use (i.e. magazines, radio broadcasts, public outreach events). Cost-effectiveness ratios per person reporting systematic condom use resulted in the following ranking: magazines, radio and public outreach events. Sensitivity analyses indicate rankings are insensitive to variation of key parameters although ratios must be interpreted with caution. This analysis suggests that while individual interventions are an attractive use of resources to raise awareness, this may not translate into a cost-effective impact on behaviour change. The study found that the extensive reach of public outreach events did not seem to influence behaviour change as cost-effectively when compared with magazines or radio broadcasts. Behavioural interventions are context-specific and their effectiveness influenced by a

  13. Can a Costly Intervention Be Cost-effective?

    Science.gov (United States)

    Foster, E. Michael; Jones, Damon

    2009-01-01

    Objectives To examine the cost-effectiveness of the Fast Track intervention, a multi-year, multi-component intervention designed to reduce violence among at-risk children. A previous report documented the favorable effect of intervention on the highest-risk group of ninth-graders diagnosed with conduct disorder, as well as self-reported delinquency. The current report addressed the cost-effectiveness of the intervention for these measures of program impact. Design Costs of the intervention were estimated using program budgets. Incremental cost-effectiveness ratios were computed to determine the cost per unit of improvement in the 3 outcomes measured in the 10th year of the study. Results Examination of the total sample showed that the intervention was not cost-effective at likely levels of policymakers' willingness to pay for the key outcomes. Subsequent analysis of those most at risk, however, showed that the intervention likely was cost-effective given specified willingness-to-pay criteria. Conclusions Results indicate that the intervention is cost-effective for the children at highest risk. From a policy standpoint, this finding is encouraging because such children are likely to generate higher costs for society over their lifetimes. However, substantial barriers to cost-effectiveness remain, such as the ability to effectively identify and recruit such higher-risk children in future implementations. PMID:17088509

  14. Cost-effectiveness of Chlamydia antibody tests in subfertile women.

    Science.gov (United States)

    Fiddelers, A A A; Land, J A; Voss, G; Kessels, A G H; Severens, J L

    2005-02-01

    For the evaluation of tubal function, Chlamydia antibody testing (CAT) has been introduced as a screening test. We compared six CAT screening strategies (five CAT tests and one combination of tests), with respect to their cost-effectiveness, by using IVF pregnancy rate as outcome measure. A decision analytic model was developed based on a source population of 1715 subfertile women. The model incorporates hysterosalpingography (HSG), laparoscopy and IVF. To calculate IVF pregnancy rates, costs, effects, cost-effectiveness and incremental costs per effect of the six different CAT screening strategies were determined. pELISA Medac turned out to be the most cost-effective CAT screening strategy (15 075 per IVF pregnancy), followed by MIF Anilabsystems (15 108). A combination of tests (pELISA Medac and MIF Anilabsystems; 15 127) did not improve the cost-effectiveness of the single strategies. Sensitivity analyses showed that the results are robust for changes in the baseline values of the model parameters. Only small differences were found between the screening strategies regarding the cost-effectiveness, although pELISA Medac was the most cost-effective strategy. Before introducing a particular CAT test into clinical practice, one should consider the effects and consequences of the entire screening strategy, instead of only the diagnostic accuracy of the test used.

  15. Cost-effectiveness and the socialization of health care.

    Science.gov (United States)

    Musgrove, P

    1995-01-01

    The more health care is socialized, the more cost-effectiveness is an appropriate criterion for expenditure. Utility-maximizing individuals, facing divisibility of health care purchases and declining marginal health gains, and complete information about probable health improvements, should buy health care according to its cost-effectiveness. Absent these features, individual health spending will not be cost-effective; and in any case, differences in personal utilities and risk aversion will not lead to the same ranking of health care interventions for everyone. Private insurance frees consumers from concern for cost, which undermines cost-effectiveness, but lets them emphasize effectiveness, which favors value for money. This is most important for costly and cost-effective interventions, especially for poor people. Cost-effectiveness is more appropriate and easier to achieve under second-party insurance. More complete socialization of health care, via public finance, can yield greater efficiency by making insurance compulsory. Cost-effectiveness is also more attractive when taxpayers subsidize others' care: needs (effectiveness) take precedence over wants (utility). The gain in effectiveness may be greater, and the welfare loss from Pareto non-optimality smaller, in poor countries than in rich ones.

  16. The Potential Cost-Effectiveness of Amblyopia Screening Programs

    Science.gov (United States)

    Rein, David B.; Wittenborn, John S.; Zhang, Xinzhi; Song, Michael; Saaddine, Jinan B.

    2013-01-01

    Background To estimate the incremental cost-effectiveness of amblyopia screening at preschool and kindergarten, we compared the costs and benefits of 3 amblyopia screening scenarios to no screening and to each other: (1) acuity/stereopsis (A/S) screening at kindergarten, (2) A/S screening at preschool and kindergarten, and (3) photoscreening at preschool and A/S screening at kindergarten. Methods We programmed a probabilistic microsimulation model of amblyopia natural history and response to treatment with screening costs and outcomes estimated from 2 state programs. We calculated the probability that no screening and each of the 3 interventions were most cost-effective per incremental quality-adjusted life year (QALY) gained and case avoided. Results Assuming a minimal 0.01 utility loss from monocular vision loss, no screening was most cost-effective with a willingness to pay (WTP) of less than $16,000 per QALY gained. A/S screening at kindergarten alone was most cost-effective between a WTP of $17,000 and $21,000. A/S screening at preschool and kindergarten was most cost-effective between a WTP of $22,000 and $75,000, and photoscreening at preschool and A/S screening at kindergarten was most cost-effective at a WTP greater than $75,000. Cost-effectiveness substantially improved when assuming a greater utility loss. All scenarios were cost-effective when assuming a WTP of $10,500 per case of amblyopia cured. Conclusions All 3 screening interventions evaluated are likely to be considered cost-effective relative to many other potential public health programs. The choice of screening option depends on budgetary resources and the value placed on monocular vision loss prevention by funding agencies. PMID:21877675

  17. Reservoirs operation and water resources utilization coordination in Hongshuihe basin

    Science.gov (United States)

    Li, Chonghao; Chi, Kaige; Pang, Bo; Tang, Hongbin

    2018-06-01

    In the recent decade, the demand for water resources has been increasing with the economic development. The reservoirs of cascade hydropower stations in Hongshuihe basin, which are constructed with a main purpose of power generation, are facing more integrated water resources utilization problem. The conflict between power generation of cascade reservoirs and flood control, shipping, environmental protection and water supply has become increasingly prominent. This paper introduces the general situation and integrated water demand of cascade reservoirs in Hongshuihe basin, and it analyses the impact of various types of integrated water demand on power generation and supply. It establishes mathematic models, constrained by various types of integrated water demand, to guide the operation and water resources utilization management of cascade reservoirs in Hongshuihe basin. Integrated water coordination mechanism of Hongshuihe basin is also introduced. It provides a technical and management guide and demonstration for cascade reservoirs operation and integrated water management at home and abroad.

  18. Global cost-effectiveness of GDM screening and management

    DEFF Research Database (Denmark)

    Weile, Louise K K; Kahn, James G; Marseille, Elliot

    2015-01-01

    a systematic search and abstraction of cost-effectiveness and cost-utility studies from 2002 to 2014. We standardized all findings to 2014 US dollars. We found that cost-effectiveness ratios varied widely. Most variation was found to be due to differences in geographic setting, diagnostic criteria...... and intervention approaches, and outcomes (e.g., inclusion or exclusion of long-term type 2 diabetes risk and associated costs). We concluded that incorporation of long-term benefits of GDM screening and treatment has huge impact on cost-effectiveness estimates. Based on the large methodological heterogeneity...

  19. Cost effectiveness analysis of indoor radon control measures

    International Nuclear Information System (INIS)

    Fujimoto, Kenzo

    1989-01-01

    The problem of radon 222 in buildings as a contributor to radiation exposure is described. Five different control methods and the dose reductions that would result from each are analysed. The annualized cost for each control measure was evaluated and the cost effectiveness of each control measure was calculated on the basis of dollars per person-sievert dose reduction. The use of unipolar ion generators for particle removal appears to be the most cost effective and the use of ceiling fans to increase air circulation the least cost effective. 3 figs., 1 tab

  20. Cost-effective management alternatives for Snake River Chinook salmon: a biological-economic synthesis.

    Science.gov (United States)

    Halsing, David L; Moore, Michael R

    2008-04-01

    The mandate to increase endangered salmon populations in the Columbia River Basin of North America has created a complex, controversial resource-management issue. We constructed an integrated assessment model as a tool for analyzing biological-economic trade-offs in recovery of Snake River spring- and summer-run chinook salmon (Oncorhynchus tshawytscha). We merged 3 frameworks: a salmon-passage model to predict migration and survival of smolts; an age-structured matrix model to predict long-term population growth rates of salmon stocks; and a cost-effectiveness analysis to determine a set of least-cost management alternatives for achieving particular population growth rates. We assessed 6 individual salmon-management measures and 76 management alternatives composed of one or more measures. To reflect uncertainty, results were derived for different assumptions of effectiveness of smolt transport around dams. Removal of an estuarine predator, the Caspian Tern (Sterna caspia), was cost-effective and generally increased long-term population growth rates regardless of transport effectiveness. Elimination of adult salmon harvest had a similar effect over a range of its cost estimates. The specific management alternatives in the cost-effective set depended on assumptions about transport effectiveness. On the basis of recent estimates of smolt transport effectiveness, alternatives that discontinued transportation or breached dams were prevalent in the cost-effective set, whereas alternatives that maximized transportation dominated if transport effectiveness was relatively high. More generally, the analysis eliminated 80-90% of management alternatives from the cost-effective set. Application of our results to salmon management is limited by data availability and model assumptions, but these limitations can help guide research that addresses critical uncertainties and information. Our results thus demonstrate that linking biology and economics through integrated models can

  1. Cost effectiveness of facility and home based HIV voluntary ...

    African Journals Online (AJOL)

    Cost effectiveness of facility and home based HIV voluntary counseling and ... Background: In Uganda, the main stay for provision of human immunodeficiency virus (HIV) voluntary counseling and testing (VCT) ... AJOL African Journals Online.

  2. Cost-effectiveness and radiation risk of breast cancer screening

    International Nuclear Information System (INIS)

    Rombach, J.J.

    1987-01-01

    Base cost effectiveness risk associated with radiological screening for tuberculosis and lung tumor the Government of Netherlands advised against mass screening. However, mass screening remains an important method in the case of breast cancer

  3. Bioinformatics tools for development of fast and cost effective simple ...

    African Journals Online (AJOL)

    Bioinformatics tools for development of fast and cost effective simple sequence repeat ... comparative mapping and exploration of functional genetic diversity in the ... Already, a number of computer programs have been implemented that aim at ...

  4. Costs and Cost-Effectiveness of Plasmodium vivax Control.

    Science.gov (United States)

    White, Michael T; Yeung, Shunmay; Patouillard, Edith; Cibulskis, Richard

    2016-12-28

    The continued success of efforts to reduce the global malaria burden will require sustained funding for interventions specifically targeting Plasmodium vivax The optimal use of limited financial resources necessitates cost and cost-effectiveness analyses of strategies for diagnosing and treating P. vivax and vector control tools. Herein, we review the existing published evidence on the costs and cost-effectiveness of interventions for controlling P. vivax, identifying nine studies focused on diagnosis and treatment and seven studies focused on vector control. Although many of the results from the much more extensive P. falciparum literature can be applied to P. vivax, it is not always possible to extrapolate results from P. falciparum-specific cost-effectiveness analyses. Notably, there is a need for additional studies to evaluate the potential cost-effectiveness of radical cure with primaquine for the prevention of P. vivax relapses with glucose-6-phosphate dehydrogenase testing. © The American Society of Tropical Medicine and Hygiene.

  5. COST-EFFECTIVENESS ANALYSIS OF OUTSOURCING SERVICES IN REGARD TO Foreign ECONOMIC ACTIVITY OF ENTERPRISES

    OpenAIRE

    Evgenia Sergeevna Gracheva; Evgeniya Alexandrovna Ermakova

    2017-01-01

    Despite enterprises, which render outsourcing services, appeared on the Russian services market with the beginning of market relations, there are not many researches that deal with competition and cost-effectiveness analyses of outsourcing services in regard to foreign economic activity. Economic integration of Russian business into international economic relations leads to complication of all national foreign economic complex and to the necessity of international economic infrastructure ...

  6. Cost-effective conservation of an endangered frog under uncertainty.

    Science.gov (United States)

    Rose, Lucy E; Heard, Geoffrey W; Chee, Yung En; Wintle, Brendan A

    2016-04-01

    How should managers choose among conservation options when resources are scarce and there is uncertainty regarding the effectiveness of actions? Well-developed tools exist for prioritizing areas for one-time and binary actions (e.g., protect vs. not protect), but methods for prioritizing incremental or ongoing actions (such as habitat creation and maintenance) remain uncommon. We devised an approach that combines metapopulation viability and cost-effectiveness analyses to select among alternative conservation actions while accounting for uncertainty. In our study, cost-effectiveness is the ratio between the benefit of an action and its economic cost, where benefit is the change in metapopulation viability. We applied the approach to the case of the endangered growling grass frog (Litoria raniformis), which is threatened by urban development. We extended a Bayesian model to predict metapopulation viability under 9 urbanization and management scenarios and incorporated the full probability distribution of possible outcomes for each scenario into the cost-effectiveness analysis. This allowed us to discern between cost-effective alternatives that were robust to uncertainty and those with a relatively high risk of failure. We found a relatively high risk of extinction following urbanization if the only action was reservation of core habitat; habitat creation actions performed better than enhancement actions; and cost-effectiveness ranking changed depending on the consideration of uncertainty. Our results suggest that creation and maintenance of wetlands dedicated to L. raniformis is the only cost-effective action likely to result in a sufficiently low risk of extinction. To our knowledge we are the first study to use Bayesian metapopulation viability analysis to explicitly incorporate parametric and demographic uncertainty into a cost-effective evaluation of conservation actions. The approach offers guidance to decision makers aiming to achieve cost-effective

  7. Cost-effective treatment for the couple with infertility.

    Science.gov (United States)

    Van Voorhis, B J; Syrop, C H

    2000-12-01

    Although the evaluation of cost-effective approaches to infertility treatment remains in its infancy, several important principles have emerged from the initial studies in this field. Currently, in treating couples with infertility without tubal disease or severe male-factor infertility, the most cost-effective approach is to start with IUI or superovulation-IUI treatments before resorting to IVF procedures. The woman's age and number of sperm present for insemination are significant factors influencing cost-effectiveness. The influence of certain diagnoses on the cost-effectiveness of infertility treatments requires further study. Even when accounting for the costs associated with multiple gestations and premature deliveries, the cost of IVF decreases within the range of other cost-effective medical procedures and decreases to less than the willingness to pay for these procedures. Indeed, for patients with severe tubal disease, IVF has been found to be more cost-effective than surgical repair. The cost-effectiveness of IVF will likely improve as success rates show continued improvements over the course of time. In addition, usefulness of embryo selection and practices to reduce the likelihood of high-order multiple pregnancies, without reductions in pregnancy rates, will significantly impact cost-effectiveness. The exclusion of infertility treatments from insurance plans is unfortunate and accentuates the importance of physicians understanding the economics of infertility treatment with costs that are often passed directly to the patient. The erroneous economic policies and judgments that have led to inequities in access to infertility health care should not be tolerated.

  8. COST-EFFECTIVENESS ANALYSIS OF OUTSOURCING SERVICES IN REGARD TO Foreign ECONOMIC ACTIVITY OF ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Evgenia Sergeevna Gracheva

    2017-06-01

    Full Text Available Despite enterprises, which render outsourcing services, appeared on the Russian services market with the beginning of market relations, there are not many researches that deal with competition and cost-effectiveness analyses of outsourcing services in regard to foreign economic activity. Economic integration of Russian business into international economic relations leads to complication of all national foreign economic complex and to the necessity of international economic infrastructure development. One of its most important parts are both services which deal with execution of support international economic operations (interpreting and translation services, transport services, customs services etc. and conducting foreign economic activity for client-enterprise (complex outsourcing FEA. Welcoming environment is formed nowadays for outsourcing business development in regard to foreign economic activity. It dictates the need for more thorough study of this type of business activity and development of indicators system for cost-effectiveness analysis of outsourcing in regard to foreign economic activity. Purpose – to define the complex outsourcing FEA, to develop the indicators system for cost-effectiveness analysis of outsourcing services in regard to foreign economic activity. Methodology: in article following scientific methods are used: functional method and statistical method. Results: is given authorial definition of complex outsourcing FEA, is developed the indicators system for cost-effectiveness analysis of outsourcing. Practical implications: the results of this research may be used by the businesses, which render outsourcing and intermediary services in regard to foreign economic activity.

  9. Fortescue reservoir development and reservoir studies

    Energy Technology Data Exchange (ETDEWEB)

    Henzell, S.T.; Hicks, G.J.; Horden, M.J.; Irrgang, H.R.; Janssen, E.J.; Kable, C.W.; Mitchell, R.A.H.; Morrell, N.W.; Palmer, I.D.; Seage, N.W.

    1985-03-01

    The Fortescue field in the Gippsland Basin, offshore southeastern Australia is being developed from two platforms (Fortescue A and Cobia A) by Esso Australia Ltd. (operator) and BHP Petroleum. The Fortescue reservoir is a stratigraphic trap at the top of the Latrobe Group of sediments. It overlies the western flank of the Halibut and Cobia fields and is separated from them by a non-net sequence of shales and coals which form a hydraulic barrier between the two systems. Development drilling into the Fortescue reservoir commenced in April 1983 with production coming onstream in May 1983. Fortescue, with booked reserves of 44 stock tank gigalitres (280 million stock tank barrels) of 43/sup 0/ API oil, is the seventh major oil reservoir to be developed in the offshore Gippsland Basin by Esso/BHP. In mid-1984, after drilling a total of 20 exploration and development wells, and after approximately one year of production, a detailed three-dimensional, two-phase reservoir simulation study was performed to examine the recovery efficiency, drainage patterns, pressure performance and production rate potential of the reservoir. The model was validated by history matching an extensive suite of Repeat Formation Test (RFT) pressure data. The results confirmed the reserves basis, and demonstrated that the ultimate oil recovery from the reservoir is not sensitive to production rate. This result is consistent with studies on other high quality Latrobe Group reservoirs in the Gippsland Basin which contain undersaturated crudes and receive very strong water drive from the Basin-wide aquifer system. With the development of the simulation model during the development phase, it has been possible to more accurately define the optimal well pattern for the remainder of the development.

  10. Reservoir Models for Gas Hydrate Numerical Simulation

    Science.gov (United States)

    Boswell, R.

    2016-12-01

    Scientific and industrial drilling programs have now providing detailed information on gas hydrate systems that will increasingly be the subject of field experiments. The need to carefully plan these programs requires reliable prediction of reservoir response to hydrate dissociation. Currently, a major emphasis in gas hydrate modeling is the integration of thermodynamic/hydrologic phenomena with geomechanical response for both reservoir and bounding strata. However, also critical to the ultimate success of these efforts is the appropriate development of input geologic models, including several emerging issues, including (1) reservoir heterogeneity, (2) understanding of the initial petrophysical characteristics of the system (reservoirs and seals), the dynamic evolution of those characteristics during active dissociation, and the interdependency of petrophysical parameters and (3) the nature of reservoir boundaries. Heterogeneity is ubiquitous aspect of every natural reservoir, and appropriate characterization is vital. However, heterogeneity is not random. Vertical variation can be evaluated with core and well log data; however, core data often are challenged by incomplete recovery. Well logs also provide interpretation challenges, particularly where reservoirs are thinly-bedded due to limitation in vertical resolution. This imprecision will extend to any petrophysical measurements that are derived from evaluation of log data. Extrapolation of log data laterally is also complex, and should be supported by geologic mapping. Key petrophysical parameters include porosity, permeability and it many aspects, and water saturation. Field data collected to date suggest that the degree of hydrate saturation is strongly controlled by/dependant upon reservoir quality and that the ratio of free to bound water in the remaining pore space is likely also controlled by reservoir quality. Further, those parameters will also evolve during dissociation, and not necessary in a simple

  11. Cost-effectiveness analysis of treatments for premenstrual dysphoric disorder.

    Science.gov (United States)

    Rendas-Baum, Regina; Yang, Min; Gricar, Joseph; Wallenstein, Gene V

    2010-01-01

    Premenstrual syndrome (PMS) is reported to affect between 13% and 31% of women. Between 3% and 8% of women are reported to meet criteria for the more severe form of PMS, premenstrual dysphoric disorder (PMDD). Although PMDD has received increased attention in recent years, the cost effectiveness of treatments for PMDD remains unknown. To evaluate the cost effectiveness of the four medications with a US FDA-approved indication for PMDD: fluoxetine, sertraline, paroxetine and drospirenone plus ethinyl estradiol (DRSP/EE). A decision-analytic model was used to evaluate both direct costs (medication and physician visits) and clinical outcomes (treatment success, failure and discontinuation). Medication costs were based on average wholesale prices of branded products; physician visit costs were obtained from a claims database study of PMDD patients and the Agency for Healthcare Research and Quality. Clinical outcome probabilities were derived from published clinical trials in PMDD. The incremental cost-effectiveness ratio (ICER) was calculated using the difference in costs and percentage of successfully treated patients at 6 months. Deterministic and probabilistic sensitivity analyses were used to assess the impact of uncertainty in parameter estimates. Threshold values where a change in the cost-effective strategy occurred were identified using a net benefit framework. Starting therapy with DRSP/EE dominated both sertraline and paroxetine, but not fluoxetine. The estimated ICER of initiating treatment with fluoxetine relative to DRSP/EE was $US4385 per treatment success (year 2007 values). Cost-effectiveness acceptability curves revealed that for ceiling ratios>or=$US3450 per treatment success, fluoxetine had the highest probability (>or=0.37) of being the most cost-effective treatment, relative to the other options. The cost-effectiveness acceptability frontier further indicated that DRSP/EE remained the option with the highest expected net monetary benefit for

  12. Analyses of Blood Bank Efficiency, Cost-Effectiveness and Quality

    Science.gov (United States)

    Lam, Hwai-Tai Chen

    In view of the increasing costs of hospital care, it is essential to investigate methods to improve the labor efficiency and the cost-effectiveness of the hospital technical core in order to control costs while maintaining the quality of care. This study was conducted to develop indices to measure efficiency, cost-effectiveness, and the quality of blood banks; to identify factors associated with efficiency, cost-effectiveness, and quality; and to generate strategies to improve blood bank labor efficiency and cost-effectiveness. Indices developed in this study for labor efficiency and cost-effectiveness were not affected by patient case mix and illness severity. Factors that were associated with labor efficiency were identified as managerial styles, and organizational designs that balance workload and labor resources. Medical directors' managerial involvement was not associated with labor efficiency, but their continuing education and specialty in blood bank were found to reduce the performance of unnecessary tests. Surprisingly, performing unnecessary tests had no association with labor efficiency. This suggested the existence of labor slack in blood banks. Cost -effectiveness was associated with workers' benefits, wages, and the production of high-end transfusion products by hospital-based donor rooms. Quality indices used in this study included autologous transfusion rates, platelet transfusion rates, and the check points available in an error-control system. Because the autologous transfusion rate was related to patient case mix, severity of illness, and possible inappropriate transfusion, it was not recommended to be used for quality index. Platelet-pheresis transfusion rates were associated with the transfusion preferences of the blood bank medical directors. The total number of check points in an error -control system was negatively associated with government ownership and workers' experience. Recommendations for improving labor efficiency and cost-effectiveness

  13. Cost-effectiveness analysis of sandhill crane habitat management

    Science.gov (United States)

    Kessler, Andrew C.; Merchant, James W.; Shultz, Steven D.; Allen, Craig R.

    2013-01-01

    Invasive species often threaten native wildlife populations and strain the budgets of agencies charged with wildlife management. We demonstrate the potential of cost-effectiveness analysis to improve the efficiency and value of efforts to enhance sandhill crane (Grus canadensis) roosting habitat. We focus on the central Platte River in Nebraska (USA), a region of international ecological importance for migrating avian species including sandhill cranes. Cost-effectiveness analysis is a valuation process designed to compare alternative actions based on the cost of achieving a pre-determined objective. We estimated costs for removal of invasive vegetation using geographic information system simulations and calculated benefits as the increase in area of sandhill crane roosting habitat. We generated cost effectiveness values for removing invasive vegetation on 7 land parcels and for the entire central Platte River to compare the cost-effectiveness of management at specific sites and for the central Platte River landscape. Median cost effectiveness values for the 7 land parcels evaluated suggest that costs for creating 1 additional hectare of sandhill crane roosting habitat totaled US $1,595. By contrast, we found that creating an additional hectare of sandhill crane roosting habitat could cost as much as US $12,010 for some areas in the central Platte River, indicating substantial cost savings can be achieved by using a cost effectiveness analysis to target specific land parcels for management. Cost-effectiveness analysis, used in conjunction with geographic information systems, can provide decision-makers with a new tool for identifying the most economically efficient allocation of resources to achieve habitat management goals.

  14. Reproductive biomarkers responses induced by xenoestrogens in the characid fish Astyanax fasciatus inhabiting a South American reservoir: An integrated field and laboratory approach

    Energy Technology Data Exchange (ETDEWEB)

    Prado, Paula S.; Pinheiro, Ana Paula B. [Departamento de Morfologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, UFMG, Belo Horizonte, C.P. 486, 30161-970, Minas Gerais (Brazil); Bazzoli, Nilo [Programa de Pós-Graduação em Zoologia de Vertebrados, Pontifícia Universidade Católica de Minas Gerais, PUC Minas, Belo Horizonte 30535-610, Minas Gerais (Brazil); Rizzo, Elizete, E-mail: ictio@icb.ufmg.br [Departamento de Morfologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, UFMG, Belo Horizonte, C.P. 486, 30161-970, Minas Gerais (Brazil)

    2014-05-01

    Field studies evaluating the effects of endocrine disruption chemicals (EDCs) on the fish reproduction are scarce worldwide. The goal of this study was to assess hepatic levels of vitellogenin (Vtg), zona radiata proteins (Zrp) and insulin-like growth factors (IGF-I and IGF-II), and relating them to reproductive endpoints in a wild fish population habiting a reservoir that receive domestic sewage, agricultural and industrial residues. Adult fish Astyanax fasciatus were sampled during the reproductive season in five sites from the Furnas Reservoir, Grande River, and Paraguay–Paraná basin. As a control to field data, fish were experimentally exposed via dietary intake, to oestradiol benzoate (OB) for 7 days. Fish from site with little anthropogenic interference showed hepatic levels of Vtg, Zrp and IGF-I and IGF-II similar to those from the non-treated experimental group. In sites located immediately downstream from the municipal wastewater discharges, the water total oestrogen was >120 ng/l, and male fish displayed increased Vtg and Zrp and decreased IGF-I levels similar to OB treated fish. In females, levels of Vtg, Zrp, IGF-I and IGF-II suggest an impairment of final oocyte maturation and spawning, as also detected by frequency of over-ripening, follicular atresia and fecundity. At the sites that receive agricultural and industrial residues, the water total oestrogen was <50 ng/l and females showed decreased Zrp and increased IGF-II levels associated to reduced diameter of vitellogenic follicles, indicating an inhibition of oocyte growth. Overall, the current study reports oestrogenic contamination impairing the reproduction of a wild fish from a hydroeletric reservoir and, the data contribute to improving the current knowledge on relationship between hepatic Vtg, Zrp and IGF-I and IGF-II, and reproductive endpoints in a teleost fish. In addition, our data point out novel reproductive biomarkers (IGF-I, IGF-II and over-ripening) to assessing xenoestrogenic

  15. FY 1998 report on the development of technology for reservoir mass and heat flow characterization. Theme 5-2. Monitoring and modeling of reservoir mass and heat flows (Integrated reservoir modeling and simulation techniques/Modeling support technique); 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (yoyaku). 5-2. Choryuso hendo yosoku gijutsu (modeling shien gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This R and D are aimed at establishing technology to support the reservoir modeling work required for predicting the reservoir variation from the geological/geochemical side. The contents of the development are (1) establishment of the practical measuring system for core fracture system, and (2) establishment of new modeling support technology. In (1), as the core fraction system measuring system, the measurement of fluid inclusion homogenization temperature and melting point and laser Raman spectroscopy were applied to the Wasabizawa area to obtain the results. In (2), the R and D were conducted of a rapid age measuring method for altered rock/unaltered rock and an analytical method for fluid flow using trace chemical components of hydrothermal minerals. In the former, 3-D thermoluminescent intensity of the age-known quartz was measured. The TL age of weak altered rock of Kijiyama dacite in the Wasabizawa area was 320Ka, almost the same result as 320Ka already reported. In the latter, trace components of quartz were measured at each well, and changes in the depth direction were made clear. It was made clear that the variation of Na/K ratio is large around the lost circulation stratum. The geothermal fluid flow was made clear by the analysis of similarity of the intensity ratio. (NEDO)

  16. Screening for chronic kidney disease in Canadian indigenous peoples is cost-effective.

    Science.gov (United States)

    Ferguson, Thomas W; Tangri, Navdeep; Tan, Zhi; James, Matthew T; Lavallee, Barry D A; Chartrand, Caroline D; McLeod, Lorraine L; Dart, Allison B; Rigatto, Claudio; Komenda, Paul V J

    2017-07-01

    Canadian indigenous (First Nations) have rates of kidney failure that are 2- to 4-fold higher than the non-indigenous general Canadian population. As such, a strategy of targeted screening and treatment for CKD may be cost-effective in this population. Our objective was to assess the cost utility of screening and subsequent treatment for CKD in rural Canadian indigenous adults by both estimated glomerular filtration rate and the urine albumin-to-creatinine ratio. A decision analytic Markov model was constructed comparing the screening and treatment strategy to usual care. Primary outcomes were presented as incremental cost-effectiveness ratios (ICERs) presented as a cost per quality-adjusted life-year (QALY). Screening for CKD was associated with an ICER of $23,700/QALY in comparison to usual care. Restricting the model to screening in communities accessed only by air travel (CKD prevalence 34.4%), this ratio fell to $7,790/QALY. In road accessible communities (CKD prevalence 17.6%) the ICER was $52,480/QALY. The model was robust to changes in influential variables when tested in univariate sensitivity analyses. Probabilistic sensitivity analysis found 72% of simulations to be cost-effective at a $50,000/QALY threshold and 93% of simulations to be cost-effective at a $100,000/QALY threshold. Thus, targeted screening and treatment for CKD using point-of-care testing equipment in rural Canadian indigenous populations is cost-effective, particularly in remote air access-only communities with the highest risk of CKD and kidney failure. Evaluation of targeted screening initiatives with cluster randomized controlled trials and integration of screening into routine clinical visits in communities with the highest risk is recommended. Copyright © 2017 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

  17. Identifying potentially cost effective chronic care programs for people with COPD

    Directory of Open Access Journals (Sweden)

    L M G Steuten

    2008-12-01

    Full Text Available L M G Steuten1, K M M Lemmens2, A P Nieboer2, H JM Vrijhoef31Maastricht University Medical Centre, School for Care and Public Health Research, Department of Health, Organisation, Policy and Economics, Maastricht, The Netherlands; 2Erasmus University Medical Centre, Institute of Health Policy and Management, Rotterdam, The Netherlands; 3Maastricht University Medical Centre, School for Care and Public Health Research, Department of Integrated Care, Maastricht, The NetherlandsObjective: To review published evidence regarding the cost effectiveness of multi-component COPD programs and to illustrate how potentially cost effective programs can be identified.Methods: Systematic search of Medline and Cochrane databases for evaluations of multi-component disease management or chronic care programs for adults with COPD, describing process, intermediate, and end results of care. Data were independently extracted by two reviewers and descriptively summarized.Results: Twenty articles describing 17 unique COPD programs were included. There is little evidence for significant improvements in process and intermediate outcomes, except for increased provision of patient self-management education and improved disease-specific knowledge. Overall, the COPD programs generate end results equivalent to usual care, but programs containing ≥3 components show lower relative risks for hospitalization. There is limited scope for programs to break-even or save money.Conclusion: Identifying cost effective multi-component COPD programs remains a challenge due to scarce methodologically sound studies that demonstrate significant improvements on process, intermediate and end results of care. Estimations of potential cost effectiveness of specific programs illustrated in this paper can, in the absence of ‘perfect data’, support timely decision-making regarding these programs. Nevertheless, well-designed health economic studies are needed to decrease the current decision

  18. Cost-effectiveness and pricing of antibacterial drugs.

    Science.gov (United States)

    Verhoef, Talitha I; Morris, Stephen

    2015-01-01

    Growing resistance to antibacterial agents has increased the need for the development of new drugs to treat bacterial infections. Given increasing pressure on limited health budgets, it is important to study the cost-effectiveness of these drugs, as well as their safety and efficacy, to find out whether or not they provide value for money and should be reimbursed. In this article, we systematically reviewed 38 cost-effectiveness analyses of new antibacterial agents. Most studies showed the new antibacterial drugs were cost-effective compared to older generation drugs. Drug pricing is a complicated process, involving different stakeholders, and has a large influence on cost-effectiveness. Value-based pricing is a method to determine the price of a drug at which it can be cost-effective. It is currently unclear what the influence of value-based pricing will be on the prices of new antibacterial agents, but an important factor will be the definition of 'value', which as well as the impact of the drug on patient health might also include other factors such as wider social impact and the health impact of disease. © 2015 The Authors. Chemical Biology & Drug Design Published by John Wiley & Sons Ltd.

  19. Assembling evidence for identifying reservoirs of infection.

    Science.gov (United States)

    Viana, Mafalda; Mancy, Rebecca; Biek, Roman; Cleaveland, Sarah; Cross, Paul C; Lloyd-Smith, James O; Haydon, Daniel T

    2014-05-01

    Many pathogens persist in multihost systems, making the identification of infection reservoirs crucial for devising effective interventions. Here, we present a conceptual framework for classifying patterns of incidence and prevalence, and review recent scientific advances that allow us to study and manage reservoirs simultaneously. We argue that interventions can have a crucial role in enriching our mechanistic understanding of how reservoirs function and should be embedded as quasi-experimental studies in adaptive management frameworks. Single approaches to the study of reservoirs are unlikely to generate conclusive insights whereas the formal integration of data and methodologies, involving interventions, pathogen genetics, and contemporary surveillance techniques, promises to open up new opportunities to advance understanding of complex multihost systems. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  1. Assembling evidence for identifying reservoirs of infection

    Science.gov (United States)

    Mafalda, Viana; Rebecca, Mancy; Roman, Biek; Sarah, Cleaveland; Cross, Paul C.; James O, Lloyd-Smith; Daniel T, Haydon

    2014-01-01

    Many pathogens persist in multihost systems, making the identification of infection reservoirs crucial for devising effective interventions. Here, we present a conceptual framework for classifying patterns of incidence and prevalence, and review recent scientific advances that allow us to study and manage reservoirs simultaneously. We argue that interventions can have a crucial role in enriching our mechanistic understanding of how reservoirs function and should be embedded as quasi-experimental studies in adaptive management frameworks. Single approaches to the study of reservoirs are unlikely to generate conclusive insights whereas the formal integration of data and methodologies, involving interventions, pathogen genetics, and contemporary surveillance techniques, promises to open up new opportunities to advance understanding of complex multihost systems.

  2. Reservoir Engineering Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Howard, J.H.; Schwarz, W.J.

    1977-12-14

    The Reservoir Engineering Management Program being conducted at Lawrence Berkeley Laboratory includes two major tasks: 1) the continuation of support to geothermal reservoir engineering related work, started under the NSF-RANN program and transferred to ERDA at the time of its formation; 2) the development and subsequent implementation of a broad plan for support of research in topics related to the exploitation of geothermal reservoirs. This plan is now known as the GREMP plan. Both the NSF-RANN legacies and GREMP are in direct support of the DOE/DGE mission in general and the goals of the Resource and Technology/Resource Exploitation and Assessment Branch in particular. These goals are to determine the magnitude and distribution of geothermal resources and reduce risk in their exploitation through improved understanding of generically different reservoir types. These goals are to be accomplished by: 1) the creation of a large data base about geothermal reservoirs, 2) improved tools and methods for gathering data on geothermal reservoirs, and 3) modeling of reservoirs and utilization options. The NSF legacies are more research and training oriented, and the GREMP is geared primarily to the practical development of the geothermal reservoirs. 2 tabs., 3 figs.

  3. Comparison of different strategies in prenatal screening for Down's syndrome: cost effectiveness analysis of computer simulation.

    Science.gov (United States)

    Gekas, Jean; Gagné, Geneviève; Bujold, Emmanuel; Douillard, Daniel; Forest, Jean-Claude; Reinharz, Daniel; Rousseau, François

    2009-02-13

    To assess and compare the cost effectiveness of three different strategies for prenatal screening for Down's syndrome (integrated test, sequential screening, and contingent screenings) and to determine the most useful cut-off values for risk. Computer simulations to study integrated, sequential, and contingent screening strategies with various cut-offs leading to 19 potential screening algorithms. The computer simulation was populated with data from the Serum Urine and Ultrasound Screening Study (SURUSS), real unit costs for healthcare interventions, and a population of 110 948 pregnancies from the province of Québec for the year 2001. Cost effectiveness ratios, incremental cost effectiveness ratios, and screening options' outcomes. The contingent screening strategy dominated all other screening options: it had the best cost effectiveness ratio ($C26,833 per case of Down's syndrome) with fewer procedure related euploid miscarriages and unnecessary terminations (respectively, 6 and 16 per 100,000 pregnancies). It also outperformed serum screening at the second trimester. In terms of the incremental cost effectiveness ratio, contingent screening was still dominant: compared with screening based on maternal age alone, the savings were $C30,963 per additional birth with Down's syndrome averted. Contingent screening was the only screening strategy that offered early reassurance to the majority of women (77.81%) in first trimester and minimised costs by limiting retesting during the second trimester (21.05%). For the contingent and sequential screening strategies, the choice of cut-off value for risk in the first trimester test significantly affected the cost effectiveness ratios (respectively, from $C26,833 to $C37,260 and from $C35,215 to $C45,314 per case of Down's syndrome), the number of procedure related euploid miscarriages (from 6 to 46 and from 6 to 45 per 100,000 pregnancies), and the number of unnecessary terminations (from 16 to 26 and from 16 to 25 per 100

  4. Attributes of system testing which promote cost-effectiveness

    International Nuclear Information System (INIS)

    Martin, L.C.

    1975-01-01

    A brief overview of conventional EMP testing activity examines attributes of overall systems tests which promote cost-effectiveness. The general framework represents an EMP-oriented systems test as a portion of a planned program to design, produce, and field system elements. As such, all so-called system tests should play appropriate cost-effective roles in this program, and the objective here is to disclose such roles. The intrinsic worth of such tests depends not only upon placing proper values on the outcomes, but also upon the possible eventual consequences of not doing tests. A relative worth measure is required. Attributes of EMP system testing over the range of potential activity which encompasses research and development, production, field handling, verification, evaluation, and others are reviewed and examined. Thus, the relative worth, in a cost-effective sense, is provided by relating such attributes to the overall program objectives so that values can be placed on the outcomes for tradeoff purposes

  5. Cost effectiveness and efficiency in assistive technology service delivery.

    Science.gov (United States)

    Warren, C G

    1993-01-01

    In order to develop and maintain a viable service delivery program, the realities of cost effectiveness and cost efficiency in providing assistive technology must be addressed. Cost effectiveness relates to value of the outcome compared to the expenditures. Cost efficiency analyzes how a provider uses available resources to supply goods and services. This paper describes how basic business principles of benefit/cost analysis can be used to determine cost effectiveness. In addition, basic accounting principles are used to illustrate methods of evaluating a program's cost efficiency. Service providers are encouraged to measure their own program's effectiveness and efficiency (and potential viability) in light of current trends. This paper is meant to serve as a catalyst for continued dialogue on this topic.

  6. Bayesian cost-effectiveness analysis with the R package BCEA

    CERN Document Server

    Baio, Gianluca; Heath, Anna

    2017-01-01

    The book provides a description of the process of health economic evaluation and modelling for cost-effectiveness analysis, particularly from the perspective of a Bayesian statistical approach. Some relevant theory and introductory concepts are presented using practical examples and two running case studies. The book also describes in detail how to perform health economic evaluations using the R package BCEA (Bayesian Cost-Effectiveness Analysis). BCEA can be used to post-process the results of a Bayesian cost-effectiveness model and perform advanced analyses producing standardised and highly customisable outputs. It presents all the features of the package, including its many functions and their practical application, as well as its user-friendly web interface. The book is a valuable resource for statisticians and practitioners working in the field of health economics wanting to simplify and standardise their workflow, for example in the preparation of dossiers in support of marketing authorisation, or acade...

  7. Cost-effectiveness of osteo-odonto keratoprosthesis in Singapore.

    Science.gov (United States)

    Dong, Di; Tan, Anna; Mehta, Jodhbir S; Tan, Donald; Finkelstein, Eric Andrew

    2014-01-01

    To determine the long-term cost-effectiveness of osteo-odonto keratoprosthesis (OOKP) relative to no treatment among patients with end-stage corneal and ocular surface diseases in Singapore. Cost-effectiveness analysis based on data from a retrospective cohort study. From a health system perspective, we calculated the incremental cost-effectiveness ratio of OOKP treatment relative to no treatment over a 30-year horizon, based on data from a cohort of 23 patients who underwent OOKP surgery between 2004 and 2009 at Singapore National Eye Centre. Preoperative and postoperative vision-related quality-of-life values were estimated from patients' visual outcomes and were used to calculate the gain in quality-adjusted life years (QALYs) resulting from OOKP treatment. Unsubsidized costs for surgery, consultations, examinations, medications, follow-up visits, and treatments for complications were retrieved from patients' bills to estimate the total costs associated with OOKP treatment. Sensitivity analyses were conducted to test the robustness of the model. Over a 30-year period, OOKP treatment, compared with no treatment, improved QALYs by 3.991 among patients with end-stage corneal and ocular surface diseases at an additional cost of S$67 840 (US$55 150), resulting in an incremental cost-effectiveness ratio of S$17 000/QALY (US$13 820/QALY). Based on commonly cited cost-effectiveness benchmarks, the OOKP is a cost-effective treatment for patients with end-stage corneal and ocular surface diseases. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Is individualized medicine more cost-effective? A systematic review.

    Science.gov (United States)

    Hatz, Maximilian H M; Schremser, Katharina; Rogowski, Wolf H

    2014-05-01

    Individualized medicine (IM) is a rapidly evolving field that is associated with both visions of more effective care at lower costs and fears of highly priced, low-value interventions. It is unclear which view is supported by the current evidence. Our objective was to systematically review the health economic evidence related to IM and to derive general statements on its cost-effectiveness. A literature search of MEDLINE database for English- and German-language studies was conducted. Cost-effectiveness and cost-utility studies for technologies meeting the MEDLINE medical subject headings (MeSH) definition of IM (genetically targeted interventions) were reviewed. This was followed by a standardized extraction of general study characteristics and cost-effectiveness results. Most of the 84 studies included in the synthesis were from the USA (n = 43, 51 %), cost-utility studies (n = 66, 79 %), and published since 2005 (n = 60, 71 %). The results ranged from dominant to dominated. The median value (cost-utility studies) was calculated to be rounded $US22,000 per quality-adjusted life year (QALY) gained (adjusted to $US, year 2008 values), which is equal to the rounded median cost-effectiveness in the peer-reviewed English-language literature according to a recent review. Many studies reported more than one strategy of IM with highly varying cost-effectiveness ratios. Generally, results differed according to test type, and tests for disease prognosis or screening appeared to be more favorable than tests to stratify patients by response or by risk of adverse effects. However, these results were not significant. Different definitions of IM could have been used. Quality assessment of the studies was restricted to analyzing transparency. IM neither seems to display superior cost-effectiveness than other types of medical interventions nor to be economically inferior. Instead, rather than 'whether' healthcare was individualized, the question of 'how' it was individualized was

  9. Multi-data reservoir history matching for enhanced reservoir forecasting and uncertainty quantification

    KAUST Repository

    Katterbauer, Klemens

    2015-04-01

    Reservoir simulations and history matching are critical for fine-tuning reservoir production strategies, improving understanding of the subsurface formation, and forecasting remaining reserves. Production data have long been incorporated for adjusting reservoir parameters. However, the sparse spatial sampling of this data set has posed a significant challenge for efficiently reducing uncertainty of reservoir parameters. Seismic, electromagnetic, gravity and InSAR techniques have found widespread applications in enhancing exploration for oil and gas and monitoring reservoirs. These data have however been interpreted and analyzed mostly separately, rarely exploiting the synergy effects that could result from combining them. We present a multi-data ensemble Kalman filter-based history matching framework for the simultaneous incorporation of various reservoir data such as seismic, electromagnetics, gravimetry and InSAR for best possible characterization of the reservoir formation. We apply an ensemble-based sensitivity method to evaluate the impact of each observation on the estimated reservoir parameters. Numerical experiments for different test cases demonstrate considerable matching enhancements when integrating all data sets in the history matching process. Results from the sensitivity analysis further suggest that electromagnetic data exhibit the strongest impact on the matching enhancements due to their strong differentiation between water fronts and hydrocarbons in the test cases.

  10. Cost-effectiveness analysis of computer-based assessment

    Directory of Open Access Journals (Sweden)

    Pauline Loewenberger

    2003-12-01

    Full Text Available The need for more cost-effective and pedagogically acceptable combinations of teaching and learning methods to sustain increasing student numbers means that the use of innovative methods, using technology, is accelerating. There is an expectation that economies of scale might provide greater cost-effectiveness whilst also enhancing student learning. The difficulties and complexities of these expectations are considered in this paper, which explores the challenges faced by those wishing to evaluate the costeffectiveness of computer-based assessment (CBA. The paper outlines the outcomes of a survey which attempted to gather information about the costs and benefits of CBA.

  11. Cost Effectiveness Analysis of Optimal Malaria Control Strategies in Kenya

    Directory of Open Access Journals (Sweden)

    Gabriel Otieno

    2016-03-01

    Full Text Available Malaria remains a leading cause of mortality and morbidity among the children under five and pregnant women in sub-Saharan Africa, but it is preventable and controllable provided current recommended interventions are properly implemented. Better utilization of malaria intervention strategies will ensure the gain for the value for money and producing health improvements in the most cost effective way. The purpose of the value for money drive is to develop a better understanding (and better articulation of costs and results so that more informed, evidence-based choices could be made. Cost effectiveness analysis is carried out to inform decision makers on how to determine where to allocate resources for malaria interventions. This study carries out cost effective analysis of one or all possible combinations of the optimal malaria control strategies (Insecticide Treated Bednets—ITNs, Treatment, Indoor Residual Spray—IRS and Intermittent Preventive Treatment for Pregnant Women—IPTp for the four different transmission settings in order to assess the extent to which the intervention strategies are beneficial and cost effective. For the four different transmission settings in Kenya the optimal solution for the 15 strategies and their associated effectiveness are computed. Cost-effective analysis using Incremental Cost Effectiveness Ratio (ICER was done after ranking the strategies in order of the increasing effectiveness (total infections averted. The findings shows that for the endemic regions the combination of ITNs, IRS, and IPTp was the most cost-effective of all the combined strategies developed in this study for malaria disease control and prevention; for the epidemic prone areas is the combination of the treatment and IRS; for seasonal areas is the use of ITNs plus treatment; and for the low risk areas is the use of treatment only. Malaria transmission in Kenya can be minimized through tailor-made intervention strategies for malaria control

  12. Multi Data Reservoir History Matching using the Ensemble Kalman Filter

    KAUST Repository

    Katterbauer, Klemens

    2015-05-01

    Reservoir history matching is becoming increasingly important with the growing demand for higher quality formation characterization and forecasting and the increased complexity and expenses for modern hydrocarbon exploration projects. History matching has long been dominated by adjusting reservoir parameters based solely on well data whose spatial sparse sampling has been a challenge for characterizing the flow properties in areas away from the wells. Geophysical data are widely collected nowadays for reservoir monitoring purposes, but has not yet been fully integrated into history matching and forecasting fluid flow. In this thesis, I present a pioneering approach towards incorporating different time-lapse geophysical data together for enhancing reservoir history matching and uncertainty quantification. The thesis provides several approaches to efficiently integrate multiple geophysical data, analyze the sensitivity of the history matches to observation noise, and examine the framework’s performance in several settings, such as the Norne field in Norway. The results demonstrate the significant improvements in reservoir forecasting and characterization and the synergy effects encountered between the different geophysical data. In particular, the joint use of electromagnetic and seismic data improves the accuracy of forecasting fluid properties, and the usage of electromagnetic data has led to considerably better estimates of hydrocarbon fluid components. For volatile oil and gas reservoirs the joint integration of gravimetric and InSAR data has shown to be beneficial in detecting the influx of water and thereby improving the recovery rate. Summarizing, this thesis makes an important contribution towards integrated reservoir management and multiphysics integration for reservoir history matching.

  13. Application of advanced reservoir characterization, simulation and production optimization strategies to maximize recovery in slope and basin clastic reservoirs, West Texas (Delaware Basin). Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Dutton, S.P.; Asquith, G.B.; Barton, M.D.; Cole, A.G.; Gogas, J.; Malik, M.A.; Clift, S.J.; Guzman, J.I.

    1997-11-01

    The objective of this project is to demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost-effective way to recover a higher percentage of the original oil in place through strategic placement of infill wells and geologically based field development. This project involves reservoir characterization of two Late Permian slope and basin clastic reservoirs in the Delaware Basin, West Texas, followed by a field demonstration in one of the fields. The fields being investigated are Geraldine Ford and Ford West fields in Reeves and Culberson Counties, Texas. Project objectives are divided into two major phases, reservoir characterization and implementation. The objectives of the reservoir characterization phase of the project were to provide a detailed understanding of the architecture and heterogeneity of the two fields, the Ford Geraldine unit and Ford West field. Reservoir characterization utilized 3-D seismic data, high-resolution sequence stratigraphy, subsurface field studies, outcrop characterization, and other techniques. Once reservoir characterized was completed, a pilot area of approximately 1 mi{sup 2} at the northern end of the Ford Geraldine unit was chosen for reservoir simulation. This report summarizes the results of the second year of reservoir characterization.

  14. Sediment management for reservoir

    International Nuclear Information System (INIS)

    Rahman, A.

    2005-01-01

    All natural lakes and reservoirs whether on rivers, tributaries or off channel storages are doomed to be sited up. Pakistan has two major reservoirs of Tarbela and Managla and shallow lake created by Chashma Barrage. Tarbela and Mangla Lakes are losing their capacities ever since first impounding, Tarbela since 1974 and Mangla since 1967. Tarbela Reservoir receives average annual flow of about 62 MAF and sediment deposits of 0.11 MAF whereas Mangla gets about 23 MAF of average annual flows and is losing its storage at the rate of average 34,000 MAF annually. The loss of storage is a great concern and studies for Tarbela were carried out by TAMS and Wallingford to sustain its capacity whereas no study has been done for Mangla as yet except as part of study for Raised Mangla, which is only desk work. Delta of Tarbala reservoir has advanced to about 6.59 miles (Pivot Point) from power intakes. In case of liquefaction of delta by tremor as low as 0.12g peak ground acceleration the power tunnels I, 2 and 3 will be blocked. Minimum Pool of reservoir is being raised so as to check the advance of delta. Mangla delta will follow the trend of Tarbela. Tarbela has vast amount of data as reservoir is surveyed every year, whereas Mangla Reservoir survey was done at five-year interval, which has now been proposed .to be reduced to three-year interval. In addition suspended sediment sampling of inflow streams is being done by Surface Water Hydrology Project of WAPDA as also some bed load sampling. The problem of Chasma Reservoir has also been highlighted, as it is being indiscriminately being filled up and drawdown several times a year without regard to its reaction to this treatment. The Sediment Management of these reservoirs is essential and the paper discusses pros and cons of various alternatives. (author)

  15. Quantification of Libby Reservoir Levels Needed to Maintain or Enhance Reservoir Fisheries, 1983-1987 Methods and Data Summary.

    Energy Technology Data Exchange (ETDEWEB)

    Chisholm, Ian

    1989-12-01

    Libby Reservoir was created under an International Columbia River Treaty between the United States and Canada for cooperative water development of the Columbia River Basin. The authorized purpose of the dam is to provide power, flood control, and navigation and other benefits. Research began in May 1983 to determine how operations of Libby dam impact the reservoir fishery and to suggest ways to lessen these impacts. This study is unique in that it was designed to accomplish its goal through detailed information gathering on every trophic level in the reservoir system and integration of this information into a quantitative computer model. The specific study objectives are to: quantify available reservoir habitat, determine abundance, growth and distribution of fish within the reservoir and potential recruitment of salmonids from Libby Reservoir tributaries within the United States, determine abundance and availability of food organisms for fish in the reservoir, quantify fish use of available food items, develop relationships between reservoir drawdown and reservoir habitat for fish and fish food organisms, and estimate impacts of reservoir operation on the reservoir fishery. 115 refs., 22 figs., 51 tabs.

  16. Optimising reservoir operation

    DEFF Research Database (Denmark)

    Ngo, Long le

    Anvendelse af optimeringsteknik til drift af reservoirer er blevet et væsentligt element i vandressource-planlægning og -forvaltning. Traditionelt har reservoirer været styret af heuristiske procedurer for udtag af vand, suppleret i en vis udstrækning af subjektive beslutninger. Udnyttelse af...... reservoirer involverer en lang række interessenter med meget forskellige formål (f.eks. kunstig vanding, vandkraft, vandforsyning mv.), og optimeringsteknik kan langt bedre lede frem til afbalancerede løsninger af de ofte modstridende interesser. Afhandlingen foreslår en række tiltag, hvormed traditionelle...

  17. Skeletal traction and intramedullary nailing cost-effectiveness

    African Journals Online (AJOL)

    In the operative group 24 patients had union with one delayed union while in the traction group 12 patients had union, 9 with mal union and 4 delayed union. Conclusion: Intramedullary nailing is more cost-effective than skeletal traction. It met the dominant strategy, because it was significantly less costly than skeletal ...

  18. Cost Effectiveness of Premium Versus Regular Gasoline in MCPS Buses.

    Science.gov (United States)

    Baacke, Clifford M.; Frankel, Steven M.

    The primary question posed in this study is whether premium or regular gasoline is more cost effective for the Montgomery County Public School (MCPS) bus fleet, as a whole, when miles-per-gallon, cost-per-gallon, and repair costs associated with mileage are considered. On average, both miles-per-gallon, and repair costs-per-mile favor premium…

  19. Cost-effectiveness of varenicline for smoking cessation

    DEFF Research Database (Denmark)

    Keiding, Hans

    2009-01-01

    Smoking cessation therapies are among the most cost-effective preventive healthcare measures. Varenicline is a relatively new drug developed especially for this purpose, and it has been shown to achieve better quit rates than nicotine replacement therapies and the non-nicotine-based drug, bupropion...

  20. Pressure relieving support surfaces (PRESSURE) trial: cost effectiveness analysis.

    Science.gov (United States)

    Iglesias, Cynthia; Nixon, Jane; Cranny, Gillian; Nelson, E Andrea; Hawkins, Kim; Phillips, Angela; Torgerson, David; Mason, Su; Cullum, Nicky

    2006-06-17

    To assess the cost effectiveness of alternating pressure mattresses compared with alternating pressure overlays for the prevention of pressure ulcers in patients admitted to hospital. Cost effectiveness analysis carried out alongside the pressure relieving support surfaces (PRESSURE) trial; a multicentre UK based pragmatic randomised controlled trial. 11 hospitals in six UK NHS trusts. Intention to treat population comprising 1971 participants. Kaplan Meier estimates of restricted mean time to development of pressure ulcers and total costs for treatment in hospital. Alternating pressure mattresses were associated with lower overall costs (283.6 pounds sterling per patient on average, 95% confidence interval--377.59 pounds sterling to 976.79 pounds sterling) mainly due to reduced length of stay in hospital, and greater benefits (a delay in time to ulceration of 10.64 days on average,--24.40 to 3.09). The differences in health benefits and total costs for hospital stay between alternating pressure mattresses and alternating pressure overlays were not statistically significant; however, a cost effectiveness acceptability curve indicated that on average alternating pressure mattresses compared with alternating pressure overlays were associated with an 80% probability of being cost saving. Alternating pressure mattresses for the prevention of pressure ulcers are more likely to be cost effective and are more acceptable to patients than alternating pressure overlays.

  1. Cost-effectiveness of in vitro fertilization and embryo transfer

    NARCIS (Netherlands)

    Mol, B. W.; Bonsel, G. J.; Collins, J. A.; Wiegerinck, M. A.; van der Veen, F.; Bossuyt, P. M.

    2000-01-01

    OBJECTIVE: Economic analyses in reproductive medicine often fail to take into account the chances of treatment-independent conception. We compared the cost-effectiveness of several realistic strategies involving IVF using no treatment as the reference strategy. DESIGN: A decision tree was

  2. Cost-effectiveness of hysteroscopy screening for infertile women.

    Science.gov (United States)

    Kasius, Jenneke C; Eijkemans, René J C; Mol, Ben W J; Fauser, Bart C J M; Fatemi, Human M; Broekmans, Frank J M

    2013-06-01

    This study assessed the cost-effectiveness of office hysteroscopy screening prior to IVF. Therefore, the cost-effectiveness of two distinct strategies - hysteroscopy after two failed IVF cycles (Failedhyst) and routine hysteroscopy prior to IVF (Routinehyst) - was compared with the reference strategy of no hysteroscopy (Nohyst). When present, intrauterine pathology was treated during hysteroscopy. Two models were constructed and evaluated in a decision analysis. In model I, all patients had an increase in pregnancy rate after screening hysteroscopy prior to IVF; in model II, only patients with intrauterine pathology would benefit. For each strategy, the total costs and live birth rates after a total of three IVF cycles were assessed. For model I (all patients benefit from hysteroscopy), Routinehyst was always cost-effective compared with Nohyst or Failedhyst. For the Routinehyst strategy, a monetary profit would be obtained in the case where hysteroscopy would increase the live birth rate after IVF by ≥ 2.8%. In model II (only patients with pathology benefit from hysteroscopy), Routinehyst also dominated Failedhyst. However, hysteroscopy performance resulted in considerable costs. In conclusion, the application of a routine hysteroscopy prior to IVF could be cost-effective. However, randomized trials confirming the effectiveness of hysteroscopy are needed. Copyright © 2013 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  3. Construction of cost effective homebuilt spin coater for coating ...

    African Journals Online (AJOL)

    We report the construction of a cost effective and low power consumption spin coater from a direct current (DC) brushless motor. The DC mechanical component is widdely available in the central processing unit (CPU) cooler. This set up permits simple operation where the DC voltage can be controlled manually in order to ...

  4. Cost-Effectiveness Analysis of Regorafenib for Metastatic Colorectal Cancer.

    Science.gov (United States)

    Goldstein, Daniel A; Ahmad, Bilal B; Chen, Qiushi; Ayer, Turgay; Howard, David H; Lipscomb, Joseph; El-Rayes, Bassel F; Flowers, Christopher R

    2015-11-10

    Regorafenib is a standard-care option for treatment-refractory metastatic colorectal cancer that increases median overall survival by 6 weeks compared with placebo. Given this small incremental clinical benefit, we evaluated the cost-effectiveness of regorafenib in the third-line setting for patients with metastatic colorectal cancer from the US payer perspective. We developed a Markov model to compare the cost and effectiveness of regorafenib with those of placebo in the third-line treatment of metastatic colorectal cancer. Health outcomes were measured in life-years and quality-adjusted life-years (QALYs). Drug costs were based on Medicare reimbursement rates in 2014. Model robustness was addressed in univariable and probabilistic sensitivity analyses. Regorafenib provided an additional 0.04 QALYs (0.13 life-years) at a cost of $40,000, resulting in an incremental cost-effectiveness ratio of $900,000 per QALY. The incremental cost-effectiveness ratio for regorafenib was > $550,000 per QALY in all of our univariable and probabilistic sensitivity analyses. Regorafenib provides minimal incremental benefit at high incremental cost per QALY in the third-line management of metastatic colorectal cancer. The cost-effectiveness of regorafenib could be improved by the use of value-based pricing. © 2015 by American Society of Clinical Oncology.

  5. Chain Risk Model for quantifying cost effectiveness of phytosanitary measures

    NARCIS (Netherlands)

    Benninga, J.; Hennen, W.H.G.J.; Schans, van de J.

    2010-01-01

    A Chain Risk Model (CRM) was developed for a cost effective assessment of phytosanitary measures. The CRM model can be applied to phytosanitary assessments of all agricultural product chains. In CRM, stages are connected by product volume flows with which pest infections can be spread from one stage

  6. Cost-effectiveness in Clostridium difficile treatment decision-making

    NARCIS (Netherlands)

    Nuijten, Mark J. C.; Keller, Josbert J.; Visser, Caroline E.; Redekop, Ken; Claassen, Eric; Speelman, Peter; Pronk, Marja H.

    2015-01-01

    To develop a framework for the clinical and health economic assessment for management of Clostridium difficile infection (CDI). CDI has vast economic consequences emphasizing the need for innovative and cost effective solutions, which were aim of this study. A guidance model was developed for

  7. A cost-effective Geographic Information Systems for Transportation ...

    African Journals Online (AJOL)

    A cost-effective Geographic Information Systems for Transportation (GIS-T) application for traffic congestion analyses in the Developing World. ... The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like ...

  8. Final report: Compiled MPI. Cost-Effective Exascale Application Development

    Energy Technology Data Exchange (ETDEWEB)

    Gropp, William Douglas [Univ. of Illinois, Urbana-Champaign, IL (United States)

    2015-12-21

    This is the final report on Compiled MPI: Cost-Effective Exascale Application Development, and summarizes the results under this project. The project investigated runtime enviroments that improve the performance of MPI (Message-Passing Interface) programs; work at Illinois in the last period of this project looked at optimizing data access optimizations expressed with MPI datatypes.

  9. Impacts of optimum cost effective energy efficiency standards

    International Nuclear Information System (INIS)

    Brancic, A.B.; Peters, J.S.; Arch, M.

    1991-01-01

    Building Codes are increasingly required to be responsive to social and economic policy concerns. In 1990 the State of Connecticut passes An Act Concerning Global Warming, Public Act 90-219, which mandates the revision of the state building code to require that buildings and building elements be designed to provide optimum cost-effective energy efficiency over the useful life of the building. Further, such revision must meet the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) Standard 90.1 - 1989. As the largest electric energy supplier in Connecticut, Northeast Utilities (NU) sponsored a pilot study of the cost effectiveness of alternative building code standards for commercial construction. This paper reports on this study which analyzed design and construction means, building elements, incremental construction costs, and energy savings to determine the optimum cost-effective building code standard. Findings are that ASHRAE 90.1 results in 21% energy savings and alternative standards above it result in significant additional savings. Benefit/cost analysis showed that both are cost effective

  10. The Cost-Effectiveness of Raising Teacher Quality

    Science.gov (United States)

    Yeh, Stuart S.

    2009-01-01

    Econometric studies suggest that student achievement may be improved if high-performing teachers are substituted for low-performing teachers. Drawing upon a recent study linking teacher performance on licensure exams with gains in student achievement, an analysis was conducted to determine the cost-effectiveness of requiring teacher applicants to…

  11. A Cost-Effectiveness Analysis of Early Literacy Interventions

    Science.gov (United States)

    Simon, Jessica

    2011-01-01

    Success in early literacy activities is associated with improved educational outcomes, including reduced dropout risk, in-grade retention, and special education referrals. When considering programs that will work for a particular school and context; cost-effectiveness analysis may provide useful information for decision makers. The study…

  12. Cost-Effective Mass Production of Mono Bucket Foundations

    DEFF Research Database (Denmark)

    Gres, Szymon; Nielsen, Søren Andreas; Fejerskov, Morten

    2015-01-01

    for innovative and cost-effective design of Mono Bucket foundations. Established approach merges wind and wave load models, soil/structure interaction topics, structural optimization and installation/fabrication aspects, into software package with ability to perform optimal design of the individual foundations...

  13. Cost effectiveness studies of environmental technologies: Volume 1

    International Nuclear Information System (INIS)

    Silva, E.M.; Booth, S.R.

    1994-02-01

    This paper examines cost effectiveness studies of environmental technologies including the following: (1) In Situ Air Stripping, (2) Surface Towed Ordinance Locator System, (3) Ditch Witch Horizontal Boring Technology, (4) Direct Sampling Ion Trap Mass Spectrometer, (5) In Situ Vitrification, (6) Site Characterization and Analysis Penetrometer System, (7) In Situ Bioremediation, and (8) SEAMIST Membrane System Technology

  14. Improving cost-effectiveness of hypertension management at a ...

    African Journals Online (AJOL)

    Objectives. To describe the pattern of prescribing for hypertension at a community health centre (CHC) and to evaluate the impact of introducing treatment guidelines and restricting availability of less cost-effective antihypertensive drugs on prescribing patterns, costs of drug treatment and blood pressure (BP) control. Design ...

  15. Cost-effectiveness of hip protectors in frail institutionalized elderly

    NARCIS (Netherlands)

    van Schoor, N.M.; de Bruyne, M.C.; van der Roer, N.; Lommerse, E.; van Tulder, M.; Bouter, L.M.; Lips, P.T.A.M.

    2004-01-01

    A randomized controlled trial was performed to examine the cost-effectiveness of external hip protectors in the prevention of hip fractures. Since the hip protectors were not effective in preventing hip fractures in our study, the main objective became to examine whether the use of hip protectors

  16. Flipping the Calculus Classroom: A Cost-Effective Approach

    Science.gov (United States)

    Young, Andrea

    2015-01-01

    This article discusses a cost-effective approach to flipping the calculus classroom. In particular, the emphasis is on low-cost choices, both monetarily and with regards to faculty time, that make the daunting task of flipping a course manageable for a single instructor. Student feedback and overall impressions are also presented.

  17. Cost-effectiveness analysis of infant feeding strategies to prevent ...

    African Journals Online (AJOL)

    Changing feeding practices is beneficial, depending on context. Breastfeeding is dominant (less costly, more effective) in rural settings, whilst formula feeding is a dominant strategy in urban settings. Cost-effectiveness was most sensitive to proportion of women on lifelong antiretroviral therapy (ART) and infant mortality rate ...

  18. Cost-effectiveness of PET and PET/Computed Tomography

    DEFF Research Database (Denmark)

    Gerke, Oke; Hermansson, Ronnie; Hess, Søren

    2015-01-01

    measure by means of incremental cost-effectiveness ratios when considering the replacement of the standard regimen by a new diagnostic procedure. This article discusses economic assessments of PET and PET/computed tomography reported until mid-July 2014. Forty-seven studies on cancer and noncancer...

  19. Cost-Effectiveness Analysis of Unsafe Abortion and Alternative First ...

    African Journals Online (AJOL)

    To explore the policy implications of increasing access to safe abortion in Nigeria and Ghana, we developed a computer-based decision analytic model which simulates induced abortion and its potential complications in a cohort of women, and comparatively assessed the cost-effectiveness of unsafe abortion and three ...

  20. Design of cost effective antennas for instrumentation radars

    CSIR Research Space (South Africa)

    Botha, L

    2012-09-01

    Full Text Available The cost of antennas for instrumentation radars are determined by the development cost. By re-use of the reflector system cost effective antennas can be designed. The factors governing the design of such antennas are described here....

  1. Cost-Effectiveness Analysis of Family Planning Services Offered by ...

    African Journals Online (AJOL)

    USER

    Keywords: Mobile clinics; Staic clinic; Family planning; Cost-effectiveness. Résumé. Des analyses ... d'offrir plus de méthodes de longue durée d'action peut influer sur une décision politique entre ces options. Cliniques ... nurse and a driver9.

  2. Cost-effectiveness of controlling Salmonella in the pork chain

    NARCIS (Netherlands)

    Gaag, van der M.A.; Saatkamp, H.W.; Backus, G.B.C.; Beek, van P.; Huirne, R.B.M.

    2004-01-01

    Pork is one of the sources of food-borne salmonellosis in humans. In this paper, the cost-effectiveness of different control scenarios against Salmonella in the stages finishing, transport, lairage and slaughtering is explored. A stochastic simulation model was used for the epidemiological analysis

  3. How does cognitive dissonance influence the sunk cost effect?

    Directory of Open Access Journals (Sweden)

    Chung SH

    2018-03-01

    Full Text Available Shao-Hsi Chung,1 Kuo-Chih Cheng2 1Department of Business Administration, Meiho University, Pingtung, Taiwan; 2Department of Accounting, National Changhua University of Education, Changhua City, Taiwan Background: The sunk cost effect is the scenario when individuals are willing to continue to invest capital in a failing project. The purpose of this study was to explain such irrational behavior by exploring how sunk costs affect individuals’ willingness to continue investing in an unfavorable project and to understand the role of cognitive dissonance on the sunk cost effect. Methods: This study used an experimental questionnaire survey on managers of firms listed on the Taiwan Stock Exchange and Over-The-Counter. Results: The empirical results show that cognitive dissonance does not mediate the relationship between sunk costs and willingness to continue an unfavorable investment project. However, cognitive dissonance has a moderating effect, and only when the level of cognitive dissonance is high does the sunk cost have significantly positive impacts on willingness to continue on with an unfavorable investment. Conclusion: This study offers psychological mechanisms to explain the sunk cost effect based on the theory of cognitive dissonance, and it also provides some recommendations for corporate management. Keywords: sunk costs, sunk cost effect, cognitive dissonance, behavior, unfavorable investment

  4. Cost-effectiveness of telemonitoring of diabetic foot ulcer patients

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Gerstrøm, Marie; Rasmussen, Benjamin Schnack Brandt

    2016-01-01

    This study compared the cost-effectiveness of telemonitoring with standard monitoring for patients with diabetic foot ulcers. The economic evaluation was nested within a pragmatic randomised controlled trial. A total of 374 patients were randomised to either telemonitoring or standard monitoring...

  5. Cost-effectiveness of private umbilical cord blood banking.

    Science.gov (United States)

    Kaimal, Anjali J; Smith, Catherine C; Laros, Russell K; Caughey, Aaron B; Cheng, Yvonne W

    2009-10-01

    To investigate the cost-effectiveness of private umbilical cord blood banking. A decision-analytic model was designed comparing private umbilical cord blood banking with no umbilical cord blood banking. Baseline assumptions included a cost of $3,620 for umbilical cord blood banking and storage for 20 years, a 0.04% chance of requiring an autologous stem cell transplant, a 0.07% chance of a sibling requiring an allogenic stem cell transplant, and a 50% reduction in risk of graft-versus-host disease if a sibling uses banked umbilical cord blood. Private cord blood banking is not cost-effective because it cost an additional $1,374,246 per life-year gained. In sensitivity analysis, if the cost of umbilical cord blood banking is less than $262 or the likelihood of a child needing a stem cell transplant is greater than 1 in 110, private umbilical cord blood banking becomes cost-effective. Currently, private umbilical cord blood banking is cost-effective only for children with a very high likelihood of needing a stem cell transplant. Patients considering private blood banking should be informed of the remote likelihood that a unit will be used for a child or another family member. III.

  6. Protocol for cost effective detection of cassava mosaic virus ...

    African Journals Online (AJOL)

    Early detection of cassava mosaic disease (CMD) is an extremely important step in containing the spread of the disease in Africa. Many nucleic acid based detection tools have been developed for CMD diagnosis but although these methods are specific and sensitive for their target DNA, they are not fast, cost effective, can't ...

  7. Priority Setting, Cost-Effectiveness, and the Affordable Care Act.

    Science.gov (United States)

    Persad, Govind

    2015-01-01

    The Affordable Care Act (ACA) may be the most important health law statute in American history, yet much of the most prominent legal scholarship examining it has focused on the merits of the court challenges it has faced rather than delving into the details of its priority-setting provisions. In addition to providing an overview of the ACA's provisions concerning priority setting and their developing interpretations, this Article attempts to defend three substantive propositions. First, I argue that the ACA is neither uniformly hostile nor uniformly friendly to efforts to set priorities in ways that promote cost and quality. Second, I argue that the ACA does not take a single, unified approach to priority setting; rather, its guidance varies depending on the aspect of the healthcare system at issue (Patient Centered Outcomes Research Institute, Medicare, essential health benefits) and the factors being excluded from priority setting (age, disability, life expectancy). Third, I argue that cost-effectiveness can be achieved within the ACA's constraints, but that doing so will require adopting new approaches to cost-effectiveness and priority setting. By limiting the use of standard cost-effectiveness analysis, the ACA makes the need for workable rivals to cost-effectiveness analysis a pressing practical concern rather than a mere theoretical worry.

  8. Cost-effectiveness of infant pneumococcal vaccination in the Netherlands

    NARCIS (Netherlands)

    Vemer, P.; Postma, M.J.

    2013-01-01

    Objectives: The Dutch National Immunization Program offers the 10-valent pneumococcal conjugate vaccine (PCV10). Also licensed for use in the infant population is the 13-valent PCV (PCV13). To update cost-effectiveness (CE) estimates of PCV13 over PCV10, using current epidemiological and economic

  9. Cost-effectiveness of periconceptional supplementation of folic acid

    NARCIS (Netherlands)

    Postma, MJ; Londeman, J; Veenstra, M; de Walle, HEK; de Jong-van den Berg, LTW

    Background: Supplementation of folic acid prior to and in the beginning of pregnancy may prevent neural tube defects (NTDs) in newborns - such as spina bifida - and possibly other congenital malformations. Objective. To estimate cost effectiveness of periconceptional supplementation of folk: acid

  10. Cost-effectiveness of rotavirus vaccination in Turkey

    Directory of Open Access Journals (Sweden)

    Tulin Koksal

    2017-10-01

    Conclusion: At a cost per vaccine course of US$31.5 for monovalent and US$38 for pentavalent vaccine, routine RV vaccination could be potentially cost effective and also cost saving in Turkey. National RV vaccinations will play a significant role in preventing RV infections.

  11. Systemic cost-effectiveness analysis of food hazard reduction

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård; Lawson, Lartey Godwin; Lund, Mogens

    2015-01-01

    stage are considered. Cost analyses are conducted for different risk reduction targets and for three alternative scenarios concerning the acceptable range of interventions. Results demonstrate that using a system-wide policy approach to risk reduction can be more cost-effective than a policy focusing...

  12. Cost-effectiveness of pharmacological and psychosocial interventions for schizophrenia

    Directory of Open Access Journals (Sweden)

    Vos Theo

    2011-05-01

    Full Text Available Abstract Background Information on cost-effectiveness of interventions to treat schizophrenia can assist health policy decision making, particularly given the lack of health resources in developing countries like Thailand. This study aims to determine the optimal treatment package, including drug and non-drug interventions, for schizophrenia in Thailand. Methods A Markov model was used to evaluate the cost-effectiveness of typical antipsychotics, generic risperidone, olanzapine, clozapine and family interventions. Health outcomes were measured in disability adjusted life years. We evaluated intervention benefit by estimating a change in disease severity, taking into account potential side effects. Intervention costs included outpatient treatment costs, hospitalization costs as well as time and travel costs of patients and families. Uncertainty was evaluated using Monte Carlo simulation. A sensitivity analysis of the expected range cost of generic risperidone was undertaken. Results Generic risperidone is more cost-effective than typicals if it can be produced for less than 10 baht per 2 mg tablet. Risperidone was the cheapest treatment with higher drug costs offset by lower hospital costs in comparison to typicals. The most cost-effective combination of treatments was a combination of risperidone (dominant intervention. Adding family intervention has an incremental cost-effectiveness ratio of 1,900 baht/DALY with a 100% probability of a result less than a threshold for very cost-effective interventions of one times GDP or 110,000 baht per DALY. Treating the most severe one third of patients with clozapine instead of risperidone had an incremental cost-effectiveness ratio of 320,000 baht/DALY with just over 50% probability of a result below three times GDP per capita. Conclusions There are good economic arguments to recommend generic risperidone as first line treatment in combination with family intervention. As the uncertainty interval indicates

  13. Cost-effectiveness of pharmacological and psychosocial interventions for schizophrenia.

    Science.gov (United States)

    Phanthunane, Pudtan; Vos, Theo; Whiteford, Harvey; Bertram, Melanie

    2011-05-13

    Information on cost-effectiveness of interventions to treat schizophrenia can assist health policy decision making, particularly given the lack of health resources in developing countries like Thailand. This study aims to determine the optimal treatment package, including drug and non-drug interventions, for schizophrenia in Thailand. A Markov model was used to evaluate the cost-effectiveness of typical antipsychotics, generic risperidone, olanzapine, clozapine and family interventions. Health outcomes were measured in disability adjusted life years. We evaluated intervention benefit by estimating a change in disease severity, taking into account potential side effects. Intervention costs included outpatient treatment costs, hospitalization costs as well as time and travel costs of patients and families. Uncertainty was evaluated using Monte Carlo simulation. A sensitivity analysis of the expected range cost of generic risperidone was undertaken. Generic risperidone is more cost-effective than typicals if it can be produced for less than 10 baht per 2 mg tablet. Risperidone was the cheapest treatment with higher drug costs offset by lower hospital costs in comparison to typicals. The most cost-effective combination of treatments was a combination of risperidone (dominant intervention). Adding family intervention has an incremental cost-effectiveness ratio of 1,900 baht/DALY with a 100% probability of a result less than a threshold for very cost-effective interventions of one times GDP or 110,000 baht per DALY. Treating the most severe one third of patients with clozapine instead of risperidone had an incremental cost-effectiveness ratio of 320,000 baht/DALY with just over 50% probability of a result below three times GDP per capita. There are good economic arguments to recommend generic risperidone as first line treatment in combination with family intervention. As the uncertainty interval indicates the addition of clozapine may be dominated and there are serious

  14. Simulation of the cost-effectiveness of malaria vaccines

    Directory of Open Access Journals (Sweden)

    Tediosi Fabrizio

    2009-06-01

    Full Text Available Abstract Background A wide range of possible malaria vaccines is being considered and there is a need to identify which vaccines should be prioritized for clinical development. An important element of the information needed for this prioritization is a prediction of the cost-effectiveness of potential vaccines in the transmission settings in which they are likely to be deployed. This analysis needs to consider a range of delivery modalities to ensure that clinical development plans can be aligned with the most appropriate deployment strategies. Methods The simulations are based on a previously published individual-based stochastic model for the natural history and epidemiology of Plasmodium falciparum malaria. Three different vaccine types: pre-erythrocytic vaccines (PEV, blood stage vaccines (BSV, mosquito-stage transmission-blocking vaccines (MSTBV, and combinations of these, are considered each delivered via a range of delivery modalities (Expanded Programme of Immunization – EPI-, EPI with booster, and mass vaccination combined with EPI. The cost-effectiveness ratios presented are calculated for four health outcomes, for assumed vaccine prices of US$ 2 or US$ 10 per dose, projected over a 10-year period. Results The simulations suggest that PEV will be more cost-effective in low transmission settings, while BSV at higher transmission settings. Combinations of BSV and PEV are more efficient than PEV, especially in moderate to high transmission settings, while compared to BSV they are more cost-effective in moderate to low transmission settings. Combinations of MSTBV and PEV or PEV and BSV improve the effectiveness and the cost-effectiveness compared to PEV and BSV alone only when applied with EPI and mass vaccinations. Adding booster doses to the EPI is unlikely to be a cost-effective alternative to delivering vaccines via the EPI for any vaccine, while mass vaccination improves effectiveness, especially in low transmission settings, and is

  15. Cost-effectiveness of pharmacological and psychosocial interventions for schizophrenia

    Science.gov (United States)

    2011-01-01

    Background Information on cost-effectiveness of interventions to treat schizophrenia can assist health policy decision making, particularly given the lack of health resources in developing countries like Thailand. This study aims to determine the optimal treatment package, including drug and non-drug interventions, for schizophrenia in Thailand. Methods A Markov model was used to evaluate the cost-effectiveness of typical antipsychotics, generic risperidone, olanzapine, clozapine and family interventions. Health outcomes were measured in disability adjusted life years. We evaluated intervention benefit by estimating a change in disease severity, taking into account potential side effects. Intervention costs included outpatient treatment costs, hospitalization costs as well as time and travel costs of patients and families. Uncertainty was evaluated using Monte Carlo simulation. A sensitivity analysis of the expected range cost of generic risperidone was undertaken. Results Generic risperidone is more cost-effective than typicals if it can be produced for less than 10 baht per 2 mg tablet. Risperidone was the cheapest treatment with higher drug costs offset by lower hospital costs in comparison to typicals. The most cost-effective combination of treatments was a combination of risperidone (dominant intervention). Adding family intervention has an incremental cost-effectiveness ratio of 1,900 baht/DALY with a 100% probability of a result less than a threshold for very cost-effective interventions of one times GDP or 110,000 baht per DALY. Treating the most severe one third of patients with clozapine instead of risperidone had an incremental cost-effectiveness ratio of 320,000 baht/DALY with just over 50% probability of a result below three times GDP per capita. Conclusions There are good economic arguments to recommend generic risperidone as first line treatment in combination with family intervention. As the uncertainty interval indicates the addition of clozapine

  16. Cost-effectiveness of rotavirus vaccination in Albania.

    Science.gov (United States)

    Ahmeti, Albana; Preza, Iria; Simaku, Artan; Nelaj, Erida; Clark, Andrew David; Felix Garcia, Ana Gabriela; Lara, Carlos; Hoestlandt, Céline; Blau, Julia; Bino, Silvia

    2015-05-07

    Rotavirus vaccines have been introduced in several European countries but can represent a considerable cost, particularly for countries that do not qualify for any external financial support. This study aimed to evaluate the cost-effectiveness of introducing rotavirus vaccination into Albania's national immunization program and to inform national decision-making by improving national capacity to conduct economic evaluations of new vaccines. The TRIVAC model was used to assess vaccine impact and cost-effectiveness. The model estimated health and economic outcomes attributed to 10 successive vaccinated birth cohorts (2013-2022) from a government and societal perspective. Epidemiological and economic data used in the model were based on national cost studies, and surveillance data, as well as estimates from the scientific literature. Cost-effectiveness was estimated for both the monovalent (RV1) and pentavalent vaccines (RV5). A multivariate scenario analysis (SA) was performed to evaluate the uncertainty around the incremental cost-effectiveness ratios (ICERs). With 3% discounting of costs and health benefits over the period 2013-2022, rotavirus vaccination in Albania could avert 51,172 outpatient visits, 14,200 hospitalizations, 27 deaths, 950 disability-adjusted life-years (DALYs), and gain 801 life-years. When both vaccines were compared to no vaccination, the discounted cost per DALY averted was US$ 2008 for RV1 and US$ 5047 for RV5 from a government perspective. From the societal perspective the values were US$ 517 and US$ 3556, respectively. From both the perspectives, the introduction of rotavirus vaccine to the Albanian immunization schedule is either cost-effective or highly cost-effective for a range of plausible scenarios. In most scenarios, including the base-case scenario, the discounted cost per DALY averted was less than three times the gross domestic product (GDP) per capita. However, rotavirus vaccination was not cost-effective when rotavirus cases

  17. Cost-effectiveness of emergency contraception options over 1 year.

    Science.gov (United States)

    Bellows, Brandon K; Tak, Casey R; Sanders, Jessica N; Turok, David K; Schwarz, Eleanor B

    2018-05-01

    The copper intrauterine device is the most effective form of emergency contraception and can also provide long-term contraception. The levonorgestrel intrauterine device has also been studied in combination with oral levonorgestrel for women seeking emergency contraception. However, intrauterine devices have higher up-front costs than oral methods, such as ulipristal acetate and levonorgestrel. Health care payers and decision makers (eg, health care insurers, government programs) with financial constraints must determine if the increased effectiveness of intrauterine device emergency contraception methods are worth the additional costs. We sought to compare the cost-effectiveness of 4 emergency contraception strategies-ulipristal acetate, oral levonorgestrel, copper intrauterine device, and oral levonorgestrel plus same-day levonorgestrel intrauterine device-over 1 year from a US payer perspective. Costs (2017 US dollars) and pregnancies were estimated over 1 year using a Markov model of 1000 women seeking emergency contraception. Every 28-day cycle, the model estimated the predicted number of pregnancy outcomes (ie, live birth, ectopic pregnancy, spontaneous abortion, or induced abortion) resulting from emergency contraception failure and subsequent contraception use. Model inputs were derived from published literature and national sources. An emergency contraception strategy was considered cost-effective if the incremental cost-effectiveness ratio (ie, the cost to prevent 1 additional pregnancy) was less than the weighted average cost of pregnancy outcomes in the United States ($5167). The incremental cost-effectiveness ratios and probability of being the most cost-effective emergency contraception strategy were calculated from 1000 probabilistic model iterations. One-way sensitivity analyses were used to examine uncertainty in the cost of emergency contraception, subsequent contraception, and pregnancy outcomes as well as the model probabilities. In 1000 women

  18. Practical considerations of reservoir heterogeneities on SAGD projects

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R.; Fong, C.; Li, T. [Epic Consulting Services Ltd., Calgary, AB (Canada); Bowes, C.; Toews, M. [Calgary Univ., AB (Canada)

    2008-10-15

    Significant emphasis has been placed on developing cost-effective strategies for the production of large heavy oil and bitumen reserves located in western Canada and around the world. An effective method that has been proven to be effective in this regard is steam-assisted gravity drainage (SAGD). However, determining the optimum and cost-effective strategy is a challenge to any SAGD reservoir. Average rock quality and reservoir heterogeneities have a significant impact on steam chamber development and the overall volumetric sweep. As well, the approach to SAGD simulation varies as heterogeneity changes. This paper examined two well pairs with different degrees of heterogeneity in the Surmont pilot project. The paper also addressed potential geological risk through analogy and the amount of heterogeneity that must be accounted for when developing a representative simulation. The paper provided background information on the Surmont pilot project, which consists of three horizontal SAGD well pairs in the Athabasca oil sands of northeast Alberta. The reservoir simulation model was then described. Results and conclusions were offered. It was concluded that careful production controls and strategy must be applied particular to the reservoir to ensure that the SAGD well pairs were capable of draining the mobilized oil. 5 refs., 1 tab., 25 figs.

  19. Cost-effectiveness of scaling up voluntary counselling and testing in West-Java, Indonesia.

    Science.gov (United States)

    Tromp, Noor; Siregar, Adiatma; Leuwol, Barnabas; Komarudin, Dindin; van der Ven, Andre; van Crevel, Reinout; Baltussen, Rob

    2013-01-01

    to evaluate the costs-effectiveness of scaling up community-based VCT in West-Java. the Asian epidemic model (AEM) and resource needs model (RNM) were used to calculate incremental costs per HIV infection averted and per disability-adjusted life years saved (DALYs). Locally monitored demographic, epidemiological behavior and cost data were used as model input. scaling up community-based VCT in West-Java will reduce the overall population prevalence by 36% in 2030 and costs US$248 per HIV infection averted and US$9.17 per DALY saved. Cost-effectiveness estimation were most sensitive to the impact of VCT on condom use and to the population size of clients of female sex workers (FSWs), but were overall robust. The total costs for scaling up community-based VCT range between US$1.3 and 3.8 million per year and require the number of VCT integrated clinics at public community health centers to increase from 73 in 2010 to 594 in 2030. scaling up community-based VCT seems both an effective and cost-effective intervention. However, in order to prioritize VCT in HIV/AIDS control in West-Java, issues of budget availability and organizational capacity should be addressed.

  20. The role of cognition in cost-effectiveness analyses of behavioral interventions

    Directory of Open Access Journals (Sweden)

    Prenger Rilana

    2012-03-01

    Full Text Available Abstract Background Behavioral interventions typically focus on objective behavioral endpoints like weight loss and smoking cessation. In reality, though, achieving full behavior change is a complex process in which several steps towards success are taken. Any progress in this process may also be considered as a beneficial outcome of the intervention, assuming that this increases the likelihood to achieve successful behavior change eventually. Until recently, there has been little consideration about whether partial behavior change at follow-up should be incorporated in cost-effectiveness analyses (CEAs. The aim of this explorative review is to identify CEAs of behavioral interventions in which cognitive outcome measures of behavior change are analyzed. Methods Data sources were searched for publications before May 2011. Results Twelve studies were found eligible for inclusion. Two different approaches were found: three studies calculated separate incremental cost-effectiveness ratios for cognitive outcome measures, and one study modeled partial behavior change into the final outcome. Both approaches rely on the assumption, be it implicitly or explicitly, that changes in cognitive outcome measures are predictive of future behavior change and may affect CEA outcomes. Conclusion Potential value of cognitive states in CEA, as a way to account for partial behavior change, is to some extent recognized but not (yet integrated in the field. In conclusion, CEAs should consider, and where appropriate incorporate measures of partial behavior change when reporting effectiveness and hence cost-effectiveness.

  1. Reservoir characterization of Pennsylvanian sandstone reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1995-02-01

    This final report summarizes the progress during the three years of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description; (ii) scale-up procedures; (iii) outcrop investigation. The first section describes the methods by which a reservoir can be described in three dimensions. The next step in reservoir description is to scale up reservoir properties for flow simulation. The second section addresses the issue of scale-up of reservoir properties once the spatial descriptions of properties are created. The last section describes the investigation of an outcrop.

  2. Cost-effectiveness of pneumococcal conjugate vaccination in Croatia.

    Science.gov (United States)

    Vučina, V Višekruna; Filipović, S Kurečić; Kožnjak, N; Stamenić, V; Clark, A D; Mounaud, B; Blau, J; Hoestlandt, C; Kaić, B

    2015-05-07

    Pneumococcus is a known cause of meningitis, pneumonia, sepsis, and acute otitis media in children and adults globally. Two new vaccines for children have the potential to prevent illness, disability, and death, but these vaccines are expensive. The Croatian Ministry of Health has considered introducing the vaccine in the past, but requires economic evidence to ensure that the limited funds available for health care will be used in the most effective way. Croatia appointed a multidisciplinary team of experts to evaluate the cost-effectiveness of introducing pneumococcal conjugate vaccination (PCV) into the national routine child immunization program. Both 10-valent and 13-valent PCV (PCV10 and PCV13) were compared to a scenario assuming no vaccination. The TRIVAC decision-support model was used to estimate cost-effectiveness over the period 2014-2033. We used national evidence on demographics, pneumococcal disease incidence and mortality, the age distribution of disease in children, health service utilization, vaccine coverage, vaccine timeliness, and serotype coverage. Vaccine effectiveness was based on evidence from the scientific literature. Detailed health care costs were not available from the Croatian Institute for Health Insurance at the time of the analysis so assumptions and World Health Organization (WHO) estimates for Croatia were used. We assumed a three-dose primary vaccination schedule, and an initial price of US$ 30 per dose for PCV10 and US$ 35 per dose for PCV13. We ran univariate sensitivity analyses and multivariate scenario analyses. Either vaccine is estimated to prevent approximately 100 hospital admissions and one death each year in children younger than five in Croatia. Compared to no vaccine, the discounted cost-effectiveness of either vaccine is estimated to be around US$ 69,000-77,000 per disability-adjusted life-years (DALYs) averted over the period 2014-2033 (from the government or societal perspective). Only two alternative scenarios

  3. Cost-effectiveness of norovirus vaccination in children in Peru.

    Science.gov (United States)

    Mirelman, Andrew J; Ballard, Sarah Blythe; Saito, Mayuko; Kosek, Margaret N; Gilman, Robert H

    2015-06-17

    With candidate norovirus (NV) vaccines in a rapid phase of development, assessment of the potential economic value of vaccine implementation will be necessary to aid health officials in vaccine implementation decisions. To date, no evaluations have been performed to evaluate the benefit of adopting NV vaccines for use in the childhood immunization programs of low- and middle-income countries. We used a Markov decision model to evaluate the cost-effectiveness of adding a two-dose NV vaccine to Peru's routine childhood immunization schedule using two recent estimates of NV incidence, one for a peri-urban region and one for a jungle region of the country. Using the peri-urban NV incidence estimate, the annual cost of vaccination would be $13.0 million, offset by $2.6 million in treatment savings. Overall, this would result in 473 total DALYs averted; 526,245 diarrhea cases averted;153,735 outpatient visits averted; and 414 hospitalizations averted between birth and the fifth year of life. The incremental cost-effectiveness ratio would be $21,415 per DALY averted; $19.86 per diarrhea case; $68.23 per outpatient visit; and $26,298 per hospitalization. Using the higher jungle NV incidence rates provided a lower cost per DALY of $10,135. The incremental cost per DALY with per-urban NV incidence is greater than three times the 2012 GDP per capita of Peru but the estimate drops below this threshold using the incidence from the jungle setting. In addition to the impact of incidence, sensitivity analysis showed that vaccine price and efficacy play a strong role in determining the level of cost-effectiveness. The introduction of a NV vaccine would prevent many healthcare outcomes in the Peru and potentially be cost-effective in scenarios with high NV incidence. The vaccine cost-effectiveness model could also be applied to the evaluation of NV vaccine cost-effectiveness in other countries. In resource-poor settings, where NV incidence rates are expected to be higher. Published

  4. Cost-effectiveness of Bariatric Surgery in Adolescents With Obesity.

    Science.gov (United States)

    Klebanoff, Matthew J; Chhatwal, Jagpreet; Nudel, Jacob D; Corey, Kathleen E; Kaplan, Lee M; Hur, Chin

    2017-02-01

    Severe obesity affects 4% to 6% of US youth and is increasing in prevalence. Bariatric surgery for the treatment of adolescents with severe obesity is becoming more common, but data on cost-effectiveness are limited. To assess the cost-effectiveness of bariatric surgery for adolescents with obesity using recently published results from the Teen-Longitudinal Assessment of Bariatric Surgery study. A state-transition model was constructed to compare 2 strategies: no surgery and bariatric surgery. In the no surgery strategy, patients remained at their initial body mass index (calculated as weight in kilograms divided by height in meters squared) over time. In the bariatric surgery strategy, patients were subjected to risks of perioperative mortality and complications as well as initial morbidity but also experienced longer-term quality-of-life improvements associated with weight loss. Cohort demographic information-of the 228 patients included, the mean (SD) age was 17 (1.6) years, the mean (range) body mass index was 53 (34-88), and 171 (75.0%) were female-surgery-related outcomes, and base case time horizon (3 years) were based on data from the Teen-Longitudinal Assessment of Bariatric Surgery study. One-way and probabilistic sensitivity analyses were performed. Quality-adjusted life-years (QALYs), total costs (in US dollars adjusted to 2015-year values using the Consumer Price Index), and incremental cost-effectiveness ratios (ICERs). A willingness-to-pay threshold of $100 000 per QALY was used to assess cost-effectiveness. After 3 years, surgery led to a gain of 0.199 QALYs compared with no surgery at an incremental cost of $30 747, yielding an unfavorable ICER of $154 684 per QALY. When the clinical study results were extrapolated to 4 years, the ICER decreased to $114 078 per QALY and became cost-effective by 5 years with an ICER of $91 032 per QALY. Outcomes were robust in most 1-way and probabilistic sensitivity analyses. Bariatric surgery incurs

  5. Cost-effectiveness of a central venous catheter care bundle.

    Directory of Open Access Journals (Sweden)

    Kate A Halton

    Full Text Available BACKGROUND: A bundled approach to central venous catheter care is currently being promoted as an effective way of preventing catheter-related bloodstream infection (CR-BSI. Consumables used in the bundled approach are relatively inexpensive which may lead to the conclusion that the bundle is cost-effective. However, this fails to consider the nontrivial costs of the monitoring and education activities required to implement the bundle, or that alternative strategies are available to prevent CR-BSI. We evaluated the cost-effectiveness of a bundle to prevent CR-BSI in Australian intensive care patients. METHODS AND FINDINGS: A Markov decision model was used to evaluate the cost-effectiveness of the bundle relative to remaining with current practice (a non-bundled approach to catheter care and uncoated catheters, or use of antimicrobial catheters. We assumed the bundle reduced relative risk of CR-BSI to 0.34. Given uncertainty about the cost of the bundle, threshold analyses were used to determine the maximum cost at which the bundle remained cost-effective relative to the other approaches to infection control. Sensitivity analyses explored how this threshold alters under different assumptions about the economic value placed on bed-days and health benefits gained by preventing infection. If clinicians are prepared to use antimicrobial catheters, the bundle is cost-effective if national 18-month implementation costs are below $1.1 million. If antimicrobial catheters are not an option the bundle must cost less than $4.3 million. If decision makers are only interested in obtaining cash-savings for the unit, and place no economic value on either the bed-days or the health benefits gained through preventing infection, these cost thresholds are reduced by two-thirds. CONCLUSIONS: A catheter care bundle has the potential to be cost-effective in the Australian intensive care setting. Rather than anticipating cash-savings from this intervention, decision

  6. SEISMIC DETERMINATION OF RESERVOIR HETEROGENEITY: APPLICATION TO THE CHARACTERIZATION OF HEAVY OIL RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Matthias G. Imhof; James W. Castle

    2005-02-01

    The objective of the project was to examine how seismic and geologic data can be used to improve characterization of small-scale heterogeneity and their parameterization in reservoir models. The study focused on West Coalinga Field in California. The project initially attempted to build reservoir models based on different geologic and geophysical data independently using different tools, then to compare the results, and ultimately to integrate them all. We learned, however, that this strategy was impractical. The different data and tools need to be integrated from the beginning because they are all interrelated. This report describes a new approach to geostatistical modeling and presents an integration of geology and geophysics to explain the formation of the complex Coalinga reservoir.

  7. Proposals for software analysis of cost effectiveness and cost-benefit for optimisation of radiation protection

    International Nuclear Information System (INIS)

    Schieber, C.; Lombard, J.; Lefaure, C.

    1990-06-01

    The objective of this report is to present the principles of decision making software for radiation protection option, applying ALARA principle. The choice of optimum options is performed by applying the models of cost effectiveness and cost-benefit. Options of radiation protection are described by two indicators: a simple economic indicator: cost of radiation protection; and dosimetry indicator: collective dose related to protection. For both analyses the software enables sensitivity analysis. It would be possible to complete the software by integrating a module which would take into account combinations of two options since they are not independent

  8. Cost-Effectiveness of Fecal Microbiota Transplantation in the Treatment of Recurrent Clostridium Difficile Infection: A Literature Review.

    Science.gov (United States)

    Arbel, Leor T; Hsu, Edmund; McNally, Keegan

    2017-08-23

    Clostridium difficile ( C. difficile ) is a common cause of antibiotic--associated diarrhea (AAD), being responsible for 15--25% of all AAD cases. The purpose of this literature review is to determine the cost-effectiveness of fecal microbiota transplantation (FMT) and how it compares in this regard to the standard treatments of choice for recurrent C. difficile infection (CDI). The review of the literature along with the evaluation of three comparative cost effective analyses yielded findings consistent with the view that FMT is the most cost-effective option in treating recurrent CDI. There are some (but considerably less) data indicating that FMT may be a cost effective strategy in treating initial CDI, as well. The superior cost-effectiveness of FMT as compared to the preferred standards of treatment for recurrent CDI suggest FMT use should become more integrated in routine clinical practice. Increased utilization of FMTs would allow for better control of this increasingly problematic disease as well as lower costs associated with its management.

  9. Cost-Effectiveness of Fecal Microbiota Transplantation in the Treatment of Recurrent Clostridium Difficile Infection: A Literature Review

    Science.gov (United States)

    Arbel, Leor T; McNally, Keegan

    2017-01-01

    Clostridium difficile (C. difficile) is a common cause of antibiotic-­associated diarrhea (AAD), being responsible for 15­-25% of all AAD cases. The purpose of this literature review is to determine the cost-effectiveness of fecal microbiota transplantation (FMT) and how it compares in this regard to the standard treatments of choice for recurrent C. difficile infection (CDI). The review of the literature along with the evaluation of three comparative cost effective analyses yielded findings consistent with the view that FMT is the most cost-effective option in treating recurrent CDI. There are some (but considerably less) data indicating that FMT may be a cost effective strategy in treating initial CDI, as well. The superior cost-effectiveness of FMT as compared to the preferred standards of treatment for recurrent CDI suggest FMT use should become more integrated in routine clinical practice. Increased utilization of FMTs would allow for better control of this increasingly problematic disease as well as lower costs associated with its management. PMID:29067223

  10. DEVELOPMENT OF RESERVOIR CHARACTERIZATION TECHNIQUES AND PRODUCTION MODELS FOR EXPLOITING NATURALLY FRACTURED RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Wiggins; Raymon L. Brown; Faruk Civan; Richard G. Hughes

    2002-12-31

    For many years, geoscientists and engineers have undertaken research to characterize naturally fractured reservoirs. Geoscientists have focused on understanding the process of fracturing and the subsequent measurement and description of fracture characteristics. Engineers have concentrated on the fluid flow behavior in the fracture-porous media system and the development of models to predict the hydrocarbon production from these complex systems. This research attempts to integrate these two complementary views to develop a quantitative reservoir characterization methodology and flow performance model for naturally fractured reservoirs. The research has focused on estimating naturally fractured reservoir properties from seismic data, predicting fracture characteristics from well logs, and developing a naturally fractured reservoir simulator. It is important to develop techniques that can be applied to estimate the important parameters in predicting the performance of naturally fractured reservoirs. This project proposes a method to relate seismic properties to the elastic compliance and permeability of the reservoir based upon a sugar cube model. In addition, methods are presented to use conventional well logs to estimate localized fracture information for reservoir characterization purposes. The ability to estimate fracture information from conventional well logs is very important in older wells where data are often limited. Finally, a desktop naturally fractured reservoir simulator has been developed for the purpose of predicting the performance of these complex reservoirs. The simulator incorporates vertical and horizontal wellbore models, methods to handle matrix to fracture fluid transfer, and fracture permeability tensors. This research project has developed methods to characterize and study the performance of naturally fractured reservoirs that integrate geoscience and engineering data. This is an important step in developing exploitation strategies for

  11. Above Bonneville passage and propagation cost effectiveness analysis

    International Nuclear Information System (INIS)

    Paulsen, C.M.; Hyman, J.B.; Wernstedt, K.

    1993-05-01

    We have developed several models to evaluate the cost-effectiveness of alternative strategies to mitigate hydrosystem impacts on salmon and steelhead, and applied these models to areas of the Columbia River Basin. Our latest application evaluates the cost-effectiveness of proposed strategies that target mainstem survival (e.g., predator control, increases in water velocity) and subbasin propagation (e.g., habitat improvements, screening, hatchery production increases) for chinook salmon and steelhead stocks, in the portion of the Columbia Basin bounded by Bonneville, Chief Joseph, Dworshak, and Hells Canyon darns. At its core the analysis primarily considers financial cost and biological effectiveness, but we have included other attributes which may be of concern to the region

  12. [Cost-effectiveness of breast cancer screening policies in Mexico].

    Science.gov (United States)

    Valencia-Mendoza, Atanacio; Sánchez-González, Gilberto; Bautista-Arredondo, Sergio; Torres-Mejía, Gabriela; Bertozzi, Stefano M

    2009-01-01

    Generate cost-effectiveness information to allow policy makers optimize breast cancer (BC) policy in Mexico. We constructed a Markov model that incorporates four interrelated processes of the disease: the natural history; detection using mammography; treatment; and other competing-causes mortality, according to which 13 different strategies were modeled. Strategies (starting age, % of coverage, frequency in years)= (48, 25, 2), (40, 50, 2) and (40, 50, 1) constituted the optimal method for expanding the BC program, yielding 75.3, 116.4 and 171.1 thousand pesos per life-year saved, respectively. The strategies included in the optimal method for expanding the program produce a cost per life-year saved of less than two times the GNP per capita and hence are cost-effective according to WHO Commission on Macroeconomics and Health criteria.

  13. In search of cost-effective, reliable software

    International Nuclear Information System (INIS)

    Naser, J.A.; Bhatt, S.C.

    1992-01-01

    Considerable effort is ongoing to utilize the strengths of digital technology to upgrade and add functionality to existing systems and to develop solutions to problems in the nuclear industry. Acceptance of digital solutions requires verification and validation activities to ensure the reliability and acceptance of these solutions. EPRI has an ongoing effort to develop a methodology for verification and validation of digital control systems. Also, a joint project between the NRC and EPRI is developing a methodology for expert system verification and validation. To obtain a wider acceptance of digital system solutions and hence the utilization of verification and validation techniques, cost effective methods for design, development and verification and validation are needed. EPRI is leading an effort to develop methods for cost effective verification and validation for all types of software

  14. Above Bonneville Passage and Propagation Cost Effectiveness Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Paulsen, C.M.; Hyman, J.B.; Wernstedt, K.

    1993-05-01

    We have developed several models to evaluate the cost-effectiveness of alternative strategies to mitigate hydrosystem impacts on salmon and steelhead, and applied these models to areas of the Columbia River Basin. Our latest application evaluates the cost-effectiveness of proposed strategies that target mainstem survival (e.g., predator control, increases in water velocity) and subbasin propagation (e.g., habitat improvements, screening, hatchery production increases) for chinook salmon and steelhead stocks, in the portion of the Columbia Basin bounded by Bonneville, Chief Joseph, Dworshak, and Hells Canyon darns. At its core the analysis primarily considers financial cost and biological effectiveness, but we have included other attributes which may be of concern to the region.

  15. Impact and cost-effectiveness of rotavirus vaccination in Bangladesh.

    Science.gov (United States)

    Pecenka, Clint; Parashar, Umesh; Tate, Jacqueline E; Khan, Jahangir A M; Groman, Devin; Chacko, Stephen; Shamsuzzaman, Md; Clark, Andrew; Atherly, Deborah

    2017-07-13

    Diarrheal disease is a leading cause of child mortality globally, and rotavirus is responsible for more than a third of those deaths. Despite substantial decreases, the number of rotavirus deaths in children under five was 215,000 per year in 2013. Of these deaths, approximately 41% occurred in Asia and 3% of those in Bangladesh. While Bangladesh has yet to introduce rotavirus vaccination, the country applied for Gavi support and plans to introduce it in 2018. This analysis evaluates the impact and cost-effectiveness of rotavirus vaccination in Bangladesh and provides estimates of the costs of the vaccination program to help inform decision-makers and international partners. This analysis used Pan American Health Organization's TRIVAC model (version 2.0) to examine nationwide introduction of two-dose rotavirus vaccination in 2017, compared to no vaccination. Three mortality scenarios (low, high, and midpoint) were assessed. Benefits and costs were examined from the societal perspective over ten successive birth cohorts with a 3% discount rate. Model inputs were locally acquired and complemented by internationally validated estimates. Over ten years, rotavirus vaccination would prevent 4000 deaths, nearly 500,000 hospitalizations and 3 million outpatient visits in the base scenario. With a Gavi subsidy, cost/disability adjusted life year (DALY) ratios ranged from $58/DALY to $142/DALY averted. Without a Gavi subsidy and a vaccine price of $2.19 per dose, cost/DALY ratios ranged from $615/DALY to $1514/DALY averted. The discounted cost per DALY averted was less than the GDP per capita for nearly all scenarios considered, indicating that a routine rotavirus vaccination program is highly likely to be cost-effective. Even in a low mortality setting with no Gavi subsidy, rotavirus vaccination would be cost-effective. These estimates exclude the herd immunity benefits of vaccination, so represent a conservative estimate of the cost-effectiveness of rotavirus vaccination

  16. Cost-effectiveness of a pressure ulcer quality collaborative

    Directory of Open Access Journals (Sweden)

    Bal Roland

    2010-06-01

    Full Text Available Abstract Background A quality improvement collaborative (QIC in the Dutch long-term care sector (nursing homes, assisted living facilities, home care used evidence-based prevention methods to reduce the incidence and prevalence of pressure ulcers (PUs. The collaborative consisted of a core team of experts and 25 organizational project teams. Our aim was to determine its cost-effectiveness from a healthcare perspective. Methods We used a non-controlled pre-post design to establish the change in incidence and prevalence of PUs in 88 patients over the course of a year. Staff indexed data and prevention methods (activities, materials. Quality of life (Qol weights were assigned to the PU states. We assessed the costs of activities and materials in the project. A Markov model was built based on effectiveness and cost data, complemented with a probabilistic sensitivity analysis. To illustrate the results of longer term, three scenarios were created in which change in incidence and prevalence measures were (1 not sustained, (2 partially sustained, and (3 completely sustained. Results Incidence of PUs decreased from 15% to 4.5% for the 88 patients. Prevalence decreased from 38.6% to 22.7%. Average Quality of Life (Qol of patients increased by 0.02 Quality Adjusted Life Years (QALYs in two years; healthcare costs increased by €2000 per patient; the Incremental Cost-effectiveness Ratio (ICER was between 78,500 and 131,000 depending on whether the changes in incidence and prevalence of PU were sustained. Conclusions During the QIC PU incidence and prevalence significantly declined. When compared to standard PU care, the QIC was probably more costly and more effective in the short run, but its long-term cost-effectiveness is questionable. The QIC can only be cost-effective if the changes in incidence and prevalence of PU are sustained.

  17. Cost-effectiveness of a pressure ulcer quality collaborative.

    Science.gov (United States)

    Makai, Peter; Koopmanschap, Marc; Bal, Roland; Nieboer, Anna P

    2010-06-01

    A quality improvement collaborative (QIC) in the Dutch long-term care sector (nursing homes, assisted living facilities, home care) used evidence-based prevention methods to reduce the incidence and prevalence of pressure ulcers (PUs). The collaborative consisted of a core team of experts and 25 organizational project teams. Our aim was to determine its cost-effectiveness from a healthcare perspective. We used a non-controlled pre-post design to establish the change in incidence and prevalence of PUs in 88 patients over the course of a year. Staff indexed data and prevention methods (activities, materials). Quality of life (Qol) weights were assigned to the PU states. We assessed the costs of activities and materials in the project. A Markov model was built based on effectiveness and cost data, complemented with a probabilistic sensitivity analysis. To illustrate the results of longer term, three scenarios were created in which change in incidence and prevalence measures were (1) not sustained, (2) partially sustained, and (3) completely sustained. Incidence of PUs decreased from 15% to 4.5% for the 88 patients. Prevalence decreased from 38.6% to 22.7%. Average Quality of Life (Qol) of patients increased by 0.02 Quality Adjusted Life Years (QALY)s in two years; healthcare costs increased by euro2000 per patient; the Incremental Cost-effectiveness Ratio (ICER) was between 78,500 and 131,000 depending on whether the changes in incidence and prevalence of PU were sustained. During the QIC PU incidence and prevalence significantly declined. When compared to standard PU care, the QIC was probably more costly and more effective in the short run, but its long-term cost-effectiveness is questionable. The QIC can only be cost-effective if the changes in incidence and prevalence of PU are sustained.

  18. Cost-effectiveness of root caries preventive treatments.

    Science.gov (United States)

    Schwendicke, Falk; Göstemeyer, Gerd

    2017-01-01

    With a growing number of individuals retaining their teeth lifelong, often with periodontitis-induced root surface exposure, there is the need for cost-effective management strategies for root caries lesions. The present study aimed to assess the cost-effectiveness of root caries preventive treatments. Patients were simulated over 10 years using a Markov model. Four treatments were compared: No treatment, daily 225-800ppm fluoride rinses, chlorhexidine (CHX) varnish (2×/year), silver diamine fluoride (SDF) varnish (2×/year). Data from a systematic review were submitted to network meta-analysis for inferring relative efficacies of treatments. The health outcome was years of teeth being free of root caries. A mixed public-private payer perspective within 2016 German healthcare was taken, with costs being estimated from fee item catalogues or based on market prices. Populations with different numbers of teeth and tooth-level risks were modelled. Monte-Carlo microsimulations, univariate- and probabilistic sensitivity analyses were performed. In populations with 16 teeth at risk and low tooth-level risk for root caries, providing no preventive treatment was least costly, but also least effective (130 Euro, 144 years). SDF ranked next, being more costly (180 Euro), but also more effective (151 years). Payers willing to invest 8.30 Euro per root caries-free tooth-year found SDF most cost-effective. CHX varnish and fluoride rinse were not cost-effective. In populations with more teeth and high tooth-level risk, SDF was the most effective and least costly option. Root caries preventive treatments (like SDF) are effective and might even be cost-saving in high risk populations. Application of SDF can be recommended as a cost-saving treatment for prevention of root caries in patients with high risk of root caries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Cost-Effectiveness of a Clinical Childhood Obesity Intervention.

    Science.gov (United States)

    Sharifi, Mona; Franz, Calvin; Horan, Christine M; Giles, Catherine M; Long, Michael W; Ward, Zachary J; Resch, Stephen C; Marshall, Richard; Gortmaker, Steven L; Taveras, Elsie M

    2017-11-01

    To estimate the cost-effectiveness and population impact of the national implementation of the Study of Technology to Accelerate Research (STAR) intervention for childhood obesity. In the STAR cluster-randomized trial, 6- to 12-year-old children with obesity seen at pediatric practices with electronic health record (EHR)-based decision support for primary care providers and self-guided behavior-change support for parents had significantly smaller increases in BMI than children who received usual care. We used a microsimulation model of a national implementation of STAR from 2015 to 2025 among all pediatric primary care providers in the United States with fully functional EHRs to estimate cost, impact on obesity prevalence, and cost-effectiveness. The expected population reach of a 10-year national implementation is ∼2 million children, with intervention costs of $119 per child and $237 per BMI unit reduced. At 10 years, assuming maintenance of effect, the intervention is expected to avert 43 000 cases and 226 000 life-years with obesity at a net cost of $4085 per case and $774 per life-year with obesity averted. Limiting implementation to large practices and using higher estimates of EHR adoption improved both cost-effectiveness and reach, whereas decreasing the maintenance of the intervention's effect worsened the former. A childhood obesity intervention with electronic decision support for clinicians and self-guided behavior-change support for parents may be more cost-effective than previous clinical interventions. Effective and efficient interventions that target children with obesity are necessary and could work in synergy with population-level prevention strategies to accelerate progress in reducing obesity prevalence. Copyright © 2017 by the American Academy of Pediatrics.

  20. Cost-effectiveness of rotavirus vaccination in Kenya and Uganda.

    Science.gov (United States)

    Sigei, Charles; Odaga, John; Mvundura, Mercy; Madrid, Yvette; Clark, Andrew David

    2015-05-07

    Rotavirus vaccines have the potential to prevent a substantial amount of life-threatening gastroenteritis in young African children. This paper presents the results of prospective cost-effectiveness analyses for rotavirus vaccine introduction for Kenya and Uganda. In each country, a national consultant worked with a national technical working group to identify appropriate data and validate study results. Secondary data on demographics, disease burden, health utilization, and costs were used to populate the TRIVAC cost-effectiveness model. The baseline analysis assumed an initial vaccine price of $0.20 per dose, corresponding to Gavi, the Vaccine Alliance stipulated copay for low-income countries. The incremental cost-effectiveness of a 2-dose rotavirus vaccination schedule was evaluated for 20 successive birth cohorts from the government perspective in both countries, and from the societal perspective in Uganda. Between 2014 and 2033, rotavirus vaccination can avert approximately 60,935 and 216,454 undiscounted deaths and hospital admissions respectively in children under 5 years in Kenya. In Uganda, the respective number of undiscounted deaths and hospital admission averted is 70,236 and 329,779 between 2016 and 2035. Over the 20-year period, the discounted vaccine program costs are around US$ 80 million in Kenya and US$ 60 million in Uganda. Discounted government health service costs avoided are US$ 30 million in Kenya and US$ 10 million in Uganda (or US$ 18 million including household costs). The cost per disability-adjusted life-year (DALY) averted from a government perspective is US$ 38 in Kenya and US$ 34 in Uganda (US$ 29 from a societal perspective). Rotavirus vaccine introduction is highly cost-effective in both countries in a range of plausible 'what-if' scenarios. The involvement of national experts improves the quality of data used, is likely to increase acceptability of the results in decision-making, and can contribute to strengthened national

  1. COST EFFECTIVE AND HIGH RESOLUTION SUBSURFACE CHARACTERIZATION USING HYDRAULIC TOMOGRAPHY

    Science.gov (United States)

    2017-08-01

    objective of this project is to provide the DoD and its remediation contractors with the HT technology for delineating the spatial distribution of...STATEMENT Approved for public release; distribution is unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT Hydraulic Tomography ( HT ) is a high-resolution...performance of subsurface remedial actions at environmental sites. The good technical performance and cost-effectiveness of HT have been demonstrated in

  2. Invisible Cost Effective Mechanics for Anterior Space Closure.

    Science.gov (United States)

    Jumle, Aatish Vinod; Bagrecha, Saurabh; Gharat, Ninad; Misal, Abhijit; Toshniwal, N G

    2015-01-01

    The shifting paradigm towards invisible orthodontic treatment and also awareness in patients has allured their focus towards the most esthetic treatment approach. Also the lingual treatment is proved successful and is very well accepted by the patients. The problem that persist is its high expenses, which is not affordable by all patients. This article is a effort to treat a simple Class I malocclusion with anterior spacing using a simple, esthetic, Cost effective approach with acceptable results when esthetics plays a priority role.

  3. A Cost-effectiveness Analysis of Early vs Late Tracheostomy.

    Science.gov (United States)

    Liu, C Carrie; Rudmik, Luke

    2016-10-01

    The timing of tracheostomy in critically ill patients requiring mechanical ventilation is controversial. An important consideration that is currently missing in the literature is an evaluation of the economic impact of an early tracheostomy strategy vs a late tracheostomy strategy. To evaluate the cost-effectiveness of the early tracheostomy strategy vs the late tracheostomy strategy. This economic analysis was performed using a decision tree model with a 90-day time horizon. The economic perspective was that of the US health care third-party payer. The primary outcome was the incremental cost per tracheostomy avoided. Probabilities were obtained from meta-analyses of randomized clinical trials. Costs were obtained from the published literature and the Healthcare Cost and Utilization Project database. A multivariate probabilistic sensitivity analysis was performed to account for uncertainty surrounding mean values used in the reference case. The reference case demonstrated that the cost of the late tracheostomy strategy was $45 943.81 for 0.36 of effectiveness. The cost of the early tracheostomy strategy was $31 979.12 for 0.19 of effectiveness. The incremental cost-effectiveness ratio for the late tracheostomy strategy compared with the early tracheostomy strategy was $82 145.24 per tracheostomy avoided. With a willingness-to-pay threshold of $50 000, the early tracheostomy strategy is cost-effective with 56% certainty. The adaptation of an early vs a late tracheostomy strategy depends on the priorities of the decision-maker. Up to a willingness-to-pay threshold of $80 000 per tracheostomy avoided, the early tracheostomy strategy has a higher probability of being the more cost-effective intervention.

  4. Emission Control Cost-Effectiveness of Alternative-Fuel Vehicles

    OpenAIRE

    Wang, Quanlu; Sperling, Daniel; Olmstead, Janis

    1993-01-01

    Although various legislation and regulations have been adopted to promote the use of alternative-fuel vehicles for curbing urban air pollution problems, there is a lack of systematic comparisons of emission control cost-effectiveness among various alternative-fuel vehicle types. In this paper, life-cycle emission reductions and life-cycle costs were estimated for passenger cars fueled with methanol, ethanol, liquified petroleum gas, compressed natural gas, and electricity. Vehicle emission es...

  5. Cost effectiveness methodology for evaluating Korean international communication system alternatives.

    OpenAIRE

    Hwang, Tae Kyun.

    1987-01-01

    Approved for public release; distribution in unlimited. Cost and Effectiveness models are developed by using of cost-effectiveness technique for fiber optic cable and satellite communication media. The models are applied to the Korean international communication problem. Alternative selection is required since the two medias different in cost and effectiveness. The major difficulties encountered were data gathering and measuring the effectiveness of the Korean international ...

  6. Cost-effectiveness of the Norwegian breast cancer screening program.

    Science.gov (United States)

    van Luijt, P A; Heijnsdijk, E A M; de Koning, H J

    2017-02-15

    The Norwegian Breast Cancer Screening Programme (NBCSP) has a nation-wide coverage since 2005. All women aged 50-69 years are invited biennially for mammography screening. We evaluated breast cancer mortality reduction and performed a cost-effectiveness analysis, using our microsimulation model, calibrated to most recent data. The microsimulation model allows for the comparison of mortality and costs between a (hypothetical) situation without screening and a situation with screening. Breast cancer incidence in Norway had a steep increase in the early 1990s. We calibrated the model to simulate this increase and included recent costs for screening, diagnosis and treatment of breast cancer and travel and productivity loss. We estimate a 16% breast cancer mortality reduction for a cohort of women, invited to screening, followed over their complete lifetime. Cost-effectiveness is estimated at NOK 112,162 per QALY gained, when taking only direct medical costs into account (the cost of the buses, examinations, and invitations). We used a 3.5% annual discount rate. Cost-effectiveness estimates are substantially below the threshold of NOK 1,926,366 as recommended by the WHO guidelines. For the Norwegian population, which has been gradually exposed to screening, breast cancer mortality reduction for women exposed to screening is increasing and is estimated to rise to ∼30% in 2020 for women aged 55-80 years. The NBCSP is a highly cost-effective measure to reduce breast cancer specific mortality. We estimate a breast cancer specific mortality reduction of 16-30%, at the cost of 112,162 NOK per QALY gained. © 2016 UICC.

  7. Cost-effectiveness analysis of treatments for vertebral compression fractures.

    Science.gov (United States)

    Edidin, Avram A; Ong, Kevin L; Lau, Edmund; Schmier, Jordana K; Kemner, Jason E; Kurtz, Steven M

    2012-07-01

    Vertebral compression fractures (VCFs) can be treated by nonsurgical management or by minimally invasive surgical treatment including vertebroplasty and balloon kyphoplasty. The purpose of the present study was to characterize the cost to Medicare for treating VCF-diagnosed patients by nonsurgical management, vertebroplasty, or kyphoplasty. We hypothesized that surgical treatments for VCFs using vertebroplasty or kyphoplasty would be a cost-effective alternative to nonsurgical management for the Medicare patient population. Cost per life-year gained for VCF patients in the US Medicare population was compared between operated (kyphoplasty and vertebroplasty) and non-operated patients and between kyphoplasty and vertebroplasty patients, all as a function of patient age and gender. Life expectancy was estimated using a parametric Weibull survival model (adjusted for comorbidities) for 858 978 VCF patients in the 100% Medicare dataset (2005-2008). Median payer costs were identified for each treatment group for up to 3 years following VCF diagnosis, based on 67 018 VCF patients in the 5% Medicare dataset (2005-2008). A discount rate of 3% was used for the base case in the cost-effectiveness analysis, with 0% and 5% discount rates used in sensitivity analyses. After accounting for the differences in median costs and using a discount rate of 3%, the cost per life-year gained for kyphoplasty and vertebroplasty patients ranged from $US1863 to $US6687 and from $US2452 to $US13 543, respectively, compared with non-operated patients. The cost per life-year gained for kyphoplasty compared with vertebroplasty ranged from -$US4878 (cost saving) to $US2763. Among patients for whom surgical treatment was indicated, kyphoplasty was found to be cost effective, and perhaps even cost saving, compared with vertebroplasty. Even for the oldest patients (85 years of age and older), both interventions would be considered cost effective in terms of cost per life-year gained.

  8. Cost-effectiveness of screening for asymptomatic carotid atherosclerotic disease.

    Science.gov (United States)

    Derdeyn, C P; Powers, W J

    1996-11-01

    The value of screening for asymptomatic carotid stenosis has become an important issue with the recently reported beneficial effect of endarterectomy. The purpose of this study is to evaluate the cost-effectiveness of using Doppler ultrasound as a screening tool to select subjects for arteriography and subsequent surgery. A computer model was developed to simulate the cost-effectiveness of screening a cohort of 1000 men during a 20-year period. The primary outcome measure was incremental present-value dollar expenditures for screening and treatment per incremental present-value quality-adjusted life-year (QALY) saved. Estimates of disease prevalence and arteriographic and surgical complication rates were obtained from the literature. Probabilities of stroke and death with surgical and medical treatment were obtained from published clinical trials. Doppler ultrasound sensitivity and specificity were obtained through review of local experience. Estimates of costs were obtained from local Medicare reimbursement data. A one-time screening program of a population with a high prevalence (20%) of > or = 60% stenosis cost $35130 per incremental QALY gained. Decreased surgical benefit or increased annual discount rate was detrimental, resulting in lost QALYs. Annual screening cost $457773 per incremental QALY gained. In a low-prevalence (4%) population, one-time screening cost $52588 per QALY gained, while annual screening was detrimental. The cost-effectiveness of a one-time screening program for an asymptomatic population with a high prevalence of carotid stenosis may be cost-effective. Annual screening is detrimental. The most sensitive variables in this simulation model were long-term stroke risk reduction after surgery and annual discount rate for accumulated costs and QALYs.

  9. A Cost-Effectiveness Analysis Model for Evaluating and Planning Secondary Vocational Programs

    Science.gov (United States)

    Kim, Jin Eun

    1977-01-01

    This paper conceptualizes a cost-effectiveness analysis and describes a cost-effectiveness analysis model for secondary vocational programs. It generates three kinds of cost-effectiveness measures: program effectiveness, cost efficiency, and cost-effectiveness and/or performance ratio. (Author)

  10. Cost-Effectiveness of Secondary Screening Modalities for Hypertension

    Science.gov (United States)

    Wang, Y. Claire; Koval, Alisa M.; Nakamura, Miyabi; Newman, Jonathan D.; Schwartz, Joseph E.; Stone, Patricia W.

    2014-01-01

    Background Clinic-based blood pressure (CBP) has been the default approach for diagnosing hypertension, but patients may be misclassified due to masked hypertension (false negative) or “white coat” hypertension (false positive). The incorporation of other diagnostic modalities, such as home blood pressure monitoring (HBPM) and ambulatory blood pressure monitoring (ABPM), holds promise to improve diagnostic accuracy and subsequent treatment decisions. Method We reviewed the literature on the costs and cost-effectiveness of adding HBPM and ABPM into routine blood pressure screening in adults. We excluded letters, editorials, and studies of pregnant and/or pre-eclamptic patients, children, and patients with specific conditions (e.g. diabetes). Results We identified 14 original, English language studies that included cost outcomes and compared two or more modalities. ABPM was found to be cost-saving for diagnostic confirmation following an elevated CBP in 6 studies. Three of 4 studies found that adding HBPM to an elevated CBP was also cost-effective. Conclusion Existing evidence supports the cost-effectiveness of incorporating HBPM or ABPM following an initial CBP-based diagnosis of hypertension. Future research should focus on their implementation in clinical practice, long-term economic values, and potential roles in identifying masked hypertension. PMID:23263535

  11. Cost-effectiveness in Clostridium difficile treatment decision-making.

    Science.gov (United States)

    Nuijten, Mark Jc; Keller, Josbert J; Visser, Caroline E; Redekop, Ken; Claassen, Eric; Speelman, Peter; Pronk, Marja H

    2015-11-16

    To develop a framework for the clinical and health economic assessment for management of Clostridium difficile infection (CDI). CDI has vast economic consequences emphasizing the need for innovative and cost effective solutions, which were aim of this study. A guidance model was developed for coverage decisions and guideline development in CDI. The model included pharmacotherapy with oral metronidazole or oral vancomycin, which is the mainstay for pharmacological treatment of CDI and is recommended by most treatment guidelines. A design for a patient-based cost-effectiveness model was developed, which can be used to estimate the cost-effectiveness of current and future treatment strategies in CDI. Patient-based outcomes were extrapolated to the population by including factors like, e.g., person-to-person transmission, isolation precautions and closing and cleaning wards of hospitals. The proposed framework for a population-based CDI model may be used for clinical and health economic assessments of CDI guidelines and coverage decisions for emerging treatments for CDI.

  12. Cost-effective conservation planning: lessons from economics.

    Science.gov (United States)

    Duke, Joshua M; Dundas, Steven J; Messer, Kent D

    2013-08-15

    Economists advocate that the billions of public dollars spent on conservation be allocated to achieve the largest possible social benefit. This is "cost-effective conservation"-a process that incorporates both monetized benefits and costs. Though controversial, cost-effective conservation is poorly understood and rarely implemented by planners. Drawing from the largest publicly financed conservation programs in the United States, this paper seeks to improve the communication from economists to planners and to overcome resistance to cost-effective conservation. Fifteen practical lessons are distilled, including the negative implications of limiting selection with political constraints, using nonmonetized benefit measures or benefit indices, ignoring development risk, using incomplete cost measures, employing cost measures sequentially, and using benefit indices to capture costs. The paper highlights interrelationships between benefits and complications such as capitalization and intertemporal planning. The paper concludes by identifying the challenges at the research frontier, including incentive problems associated with adverse selection, additionality, and slippage. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Cost-effectiveness of secondary screening modalities for hypertension.

    Science.gov (United States)

    Wang, Y Claire; Koval, Alisa M; Nakamura, Miyabi; Newman, Jonathan D; Schwartz, Joseph E; Stone, Patricia W

    2013-02-01

    Clinic-based blood pressure (CBP) has been the default approach for the diagnosis of hypertension, but patients may be misclassified because of masked hypertension (false negative) or 'white coat' hypertension (false positive). The incorporation of other diagnostic modalities, such as home blood pressure monitoring (HBPM) and ambulatory blood pressure monitoring (ABPM), holds promise to improve diagnostic accuracy and subsequent treatment decisions. We reviewed the literature on the costs and cost-effectiveness of adding HBPM and ABPM to routine blood pressure screening in adults. We excluded letters, editorials, and studies of pregnant and/or pre-eclamptic patients, children, and patients with specific conditions (e.g. diabetes). We identified 14 original, English language studies that included cost outcomes and compared two or more modalities. ABPM was found to be cost saving for diagnostic confirmation following an elevated CBP in six studies. Three of four studies found that adding HBPM to an elevated CBP was also cost-effective. Existing evidence supports the cost-effectiveness of incorporating HBPM or ABPM after an initial CBP-based diagnosis of hypertension. Future research should focus on their implementation in clinical practice, long-term economic values, and potential roles in identifying masked hypertension.

  14. The Canadian Government perspective on cost-effective regulation

    Energy Technology Data Exchange (ETDEWEB)

    Martin, J K; Iwankow, C [Treasury Board of Canada Secretariat, Ottawa, ON (Canada)

    1997-12-31

    Fiscal constraint, globalization of markets, and accelerated technological change have resulted in a new focus on the cost-effectiveness of government activities and, in turn, on methods of policy evaluation. An exploration of regulatory problems, and the use of regulation as a public policy instrument, reveals a commonalty of experience in all industrialized countries. This paper provides a brief synopsis of the Government of Canada`s perspective on cost-effective regulation. To understand cost-effective regulation, this paper examines the principles of regulatory reform which underlie the current strategy of the federal government (collaborative decision-making mechanisms., methods of clear policy evaluation, and well defined lines of accountability). It discusses the nature of, and rationale for, government regulation, the reasons for regulatory reform in the economy, and the principal aims of Canadian regulatory reform and regulatory policy assessment. It does so by specifically addressing the role of cost-benefit analysis in the process of regulatory assessment - a method which involves systematically identifying, and quantifying where possible, the social benefits and costs associated with alternative public policy actions - with a particular focus on regulation which affects the Canadian nuclear industry. (author). 51 refs.

  15. How does cognitive dissonance influence the sunk cost effect?

    Science.gov (United States)

    Chung, Shao-Hsi; Cheng, Kuo-Chih

    2018-01-01

    The sunk cost effect is the scenario when individuals are willing to continue to invest capital in a failing project. The purpose of this study was to explain such irrational behavior by exploring how sunk costs affect individuals' willingness to continue investing in an unfavorable project and to understand the role of cognitive dissonance on the sunk cost effect. This study used an experimental questionnaire survey on managers of firms listed on the Taiwan Stock Exchange and Over-The-Counter. The empirical results show that cognitive dissonance does not mediate the relationship between sunk costs and willingness to continue an unfavorable investment project. However, cognitive dissonance has a moderating effect, and only when the level of cognitive dissonance is high does the sunk cost have significantly positive impacts on willingness to continue on with an unfavorable investment. This study offers psychological mechanisms to explain the sunk cost effect based on the theory of cognitive dissonance, and it also provides some recommendations for corporate management.

  16. Cost-effectiveness analysis of optimal strategy for tumor treatment

    International Nuclear Information System (INIS)

    Pang, Liuyong; Zhao, Zhong; Song, Xinyu

    2016-01-01

    We propose and analyze an antitumor model with combined immunotherapy and chemotherapy. Firstly, we explore the treatment effects of single immunotherapy and single chemotherapy, respectively. Results indicate that neither immunotherapy nor chemotherapy alone are adequate to cure a tumor. Hence, we apply optimal theory to investigate how the combination of immunotherapy and chemotherapy should be implemented, for a certain time period, in order to reduce the number of tumor cells, while minimizing the implementation cost of the treatment strategy. Secondly, we establish the existence of the optimality system and use Pontryagin’s Maximum Principle to characterize the optimal levels of the two treatment measures. Furthermore, we calculate the incremental cost-effectiveness ratios to analyze the cost-effectiveness of all possible combinations of the two treatment measures. Finally, numerical results show that the combination of immunotherapy and chemotherapy is the most cost-effective strategy for tumor treatment, and able to eliminate the entire tumor with size 4.470 × 10"8 in a year.

  17. Cost-effectiveness of barium enemas performed by radiographers

    International Nuclear Information System (INIS)

    Brown, Lorraine; Desai, Sharad

    2002-01-01

    AIM: To assess the cost-effectiveness of barium enemas performed by radiographers compared to those performed by consultant radiologists. METHOD: Prospective study of 200 barium enemas carried out by a senior radiographer and a consultant radiologist. The sample was a consecutive sample of adult out-patients over a 3-month period, with no exclusion. The length of time of the enema and the numbers and grades of staff involved in the procedure were recorded. This was translated into staffing costs using the appropriate pay scales. RESULTS: The barium enemas performed by the superintendent radiographer were more cost-effective than those performed by the consultant radiologist (1406 pounds for 100 radiographer-performed barium enemas compared to 1787 pounds for 100 carried out by the consultant radiologist). CONCLUSION: In terms of staffing costs, radiographers performing barium enemas not only liberates radiologist time, it is also a cost-effective method of providing an out-patient barium enema service. Brown, L. and Desai, S. (2002)

  18. The Canadian Government perspective on cost-effective regulation

    International Nuclear Information System (INIS)

    Martin, J.K.; Iwankow, C.

    1996-01-01

    Fiscal constraint, globalization of markets, and accelerated technological change have resulted in a new focus on the cost-effectiveness of government activities and, in turn, on methods of policy evaluation. An exploration of regulatory problems, and the use of regulation as a public policy instrument, reveals a commonalty of experience in all industrialized countries. This paper provides a brief synopsis of the Government of Canada's perspective on cost-effective regulation. To understand cost-effective regulation, this paper examines the principles of regulatory reform which underlie the current strategy of the federal government (collaborative decision-making mechanisms., methods of clear policy evaluation, and well defined lines of accountability). It discusses the nature of, and rationale for, government regulation, the reasons for regulatory reform in the economy, and the principal aims of Canadian regulatory reform and regulatory policy assessment. It does so by specifically addressing the role of cost-benefit analysis in the process of regulatory assessment - a method which involves systematically identifying, and quantifying where possible, the social benefits and costs associated with alternative public policy actions - with a particular focus on regulation which affects the Canadian nuclear industry. (author). 51 refs

  19. Cost-effectiveness of open versus arthroscopic rotator cuff repair.

    Science.gov (United States)

    Adla, Deepthi N; Rowsell, Mark; Pandey, Radhakant

    2010-03-01

    Economic evaluation of surgical procedures is necessary in view of more expensive newer techniques emerging in an increasingly cost-conscious health care environment. This study compares the cost-effectiveness of open rotator cuff repair with arthroscopic repair for moderately size tears. This was a prospective study of 30 consecutive patients, of whom 15 had an arthroscopic repair and 15 had an open procedure. Clinical effectiveness was assessed using Oxford and Constant shoulder scores. Costs were estimated from departmental and hospital financial data. At last follow-up, no difference Oxford and Constant shoulder scores was noted between the 2 methods of repair. There was no significant difference between the groups in the cost of time in the operating theater, inpatient time, amount of postoperative analgesia, number of postoperative outpatient visits, physiotherapy costs, and time off work. The incremental cost of each arthroscopic rotator cuff repair was pound675 ($1248.75) more than the open procedure. This was mainly in the area of direct health care costs, instrumentation in particular. Health care policy makers are increasingly demanding evidence of cost-effectiveness of a procedure. This study showed both methods of repair provide equivalent clinical results. Open cuff repair is more cost-effective than arthroscopic repair and is likely to have lower cost-utility ratio. In addition, the tariff for the arthroscopic procedure in some health care systems is same as open repair. Copyright 2010 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

  20. Cost effectiveness of detritiating water with resin columns

    International Nuclear Information System (INIS)

    Drake, R.H.; Williams, D.S.

    1997-10-01

    There are technologies in use for cleaning up concentrated tritiated process water. These are not cost effective for tritiated water with low concentrations of tritium. There are currently no cost-effective technologies for cleaning up low-tritium-concentration tritiated water, such as most tritiated groundwater, spent fuel storage basin water, or underground storage tank water. Resin removal of tritium from tritiated water at low concentrations (near the order of magnitude of drinking water standard maximums) is being tested on TA-SO (Los Alamos National Laboratory's Liquid Radioactive Waste Treatment Facility) waste streams. There are good theoretical and test indications that this may be a technologically effective means of removing tritium from tritiated water. Because of likely engineering design similarity, it is reasonable to anticipate that a resin column system's costs will be similar to some common commercial water treatment systems. Thus, the potential cost effectiveness of a resin treatment system offers hope for treating tritiated water at affordable costs. The TA-50 resin treatment cost projection of $18 per 1,000 gallons is within the same order of magnitude as cost data for typical commercial groundwater cleanup projects. The prospective Los Alamos National Laboratory (LANL) resin treatment system at $18 per 1,000 gallons appears to have a likely cost advantage of at least an order of magnitude over the competing, developmental, water detritiation technologies

  1. Determinants of Change in the Cost-effectiveness Threshold.

    Science.gov (United States)

    Paulden, Mike; O'Mahony, James; McCabe, Christopher

    2017-02-01

    The cost-effectiveness threshold in health care systems with a constrained budget should be determined by the cost-effectiveness of displacing health care services to fund new interventions. Using comparative statics, we review some potential determinants of the threshold, including the budget for health care, the demand for existing health care interventions, the technical efficiency of existing interventions, and the development of new health technologies. We consider the anticipated direction of impact that would affect the threshold following a change in each of these determinants. Where the health care system is technically efficient, an increase in the health care budget unambiguously raises the threshold, whereas an increase in the demand for existing, non-marginal health interventions unambiguously lowers the threshold. Improvements in the technical efficiency of existing interventions may raise or lower the threshold, depending on the cause of the improvement in efficiency, whether the intervention is already funded, and, if so, whether it is marginal. New technologies may also raise or lower the threshold, depending on whether the new technology is a substitute for an existing technology and, again, whether the existing technology is marginal. Our analysis permits health economists and decision makers to assess if and in what direction the threshold may change over time. This matters, as threshold changes impact the cost-effectiveness of interventions that require decisions now but have costs and effects that fall in future periods.

  2. HIV-1 Reservoir Association with Immune Activation

    Directory of Open Access Journals (Sweden)

    Alejandro Vallejo

    2015-09-01

    Full Text Available In this issue of EBioMedicine, Ruggiero and colleagues describe immune activation biomarkers associated with the size of the HIV reservoir in a carefully designed cross-sectional study. The cohort consists of a homogeneous sample of HIV-1-infected patients with long-term plasma HIV-1 RNA suppression under antiretroviral treatment (ART. It is crucial to explore the potential utility of biomarkers that are easier (less labor intensive, less expensive to measure than integrated HIV DNA load, in order to quickly and accurately quantify cellular reservoirs of HIV.

  3. Guideline adherence is worth the effort: a cost-effectiveness analysis in intrauterine insemination care.

    Science.gov (United States)

    Haagen, E C; Nelen, W L D M; Adang, E M; Grol, R P T M; Hermens, R P M G; Kremer, J A M

    2013-02-01

    a result, 415 infertile couples who started a total of 1803 IUI cycles were eligible for the cost-effectiveness analyses. Optimal adherence to the guideline recommendations about sperm quality, the total number of IUI cycles and dose of human chorionic gonadotrophin was cost-effective with an incremental net monetary benefit between € 645 and over € 7500 per couple, depending on the recommendation and assuming a willingness to pay € 20 000 for an ongoing pregnancy. Because not all recommendations applied to all 415 included couples, smaller groups were left for some of the cost-effectiveness analyses, and one integrated analysis with all recommendations within one model was impossible. Optimal guideline adherence in IUI care has substantial economic benefits when compared with suboptimal guideline adherence. For Europe, where over 144,000 IUI cycles are initiated each year to treat ≈ 32 000 infertile couples, this could mean a possible cost saving of at least 20 million euro yearly. Therefore, it is valuable to make an effort to improve guideline development and implementation.

  4. Geological Characterisation of Depleted Oil and Gas Reservoirs for ...

    African Journals Online (AJOL)

    Dr Tse

    The reservoir formation consists of multilayered alternating beds of sandstone and shale cap rocks ... In the oil sector, Nigeria is one of the highest emitters ... Industrial emission and flaring .... integration of the 3D seismic data and wireline logs.

  5. A cost-effectiveness analysis of shipboard telemedicine.

    Science.gov (United States)

    Stoloff, P H; Garcia, F E; Thomason, J E; Shia, D S

    1998-01-01

    The U.S. Navy is considering the installation of telemedicine equipment on more than 300 ships. Besides improving the quality of care, benefits would arise from avoiding medical evacuations (MEDEVACs) and returning patients to work more quickly. Because telemedicine has not yet been fully implemented by the Navy, we relied on projections of anticipated savings and costs, rather than actual expenditures, to determine cost-effectiveness. To determine the demand for telemedicine and the cost-effectiveness of various technologies (telephone and fax, e-mail and Internet, video teleconferencing (VTC), teleradiology, and diagnostic instruments), as well as their bandwidth requirements. A panel of Navy medical experts with telemedicine experience reviewed a representative sample of patient visits collected over a 1-year period and estimated the man-day savings and quality-of-care enhancements that might have occurred had telemedicine technologies been available. The savings from potentially avoiding MEDEVACs was estimated from a survey of ships' medical staff. These sample estimates were then projected to the medical workload of the entire fleet. Off-the-shelf telemedicine equipment prices were combined with installation, maintenance, training, and communication costs to obtain the lifecycle costs of the technology. If telemedicine were available to the fleet, ship medical staffs would initiate nearly 19, 000 consults in a year-7% of all patient visits. Telemedicine would enhance quality of care in two-thirds of these consults. Seventeen percent of the MEDEVACs would be preventable with telemedicine (representing 155,000 travel miles), with a savings of $4400 per MEDEVAC. If the ship's communication capabilities were available, e-mail and Internet and telephone and fax would be cost-effective on all ships (including small ships and submarines). Video teleconferencing would be cost-effective on large ships (aircraft carriers and amphibious) only. Teleradiology would be cost-effective

  6. Cost-effectiveness of hepatitis A vaccination in Indonesia

    Science.gov (United States)

    Suwantika, Auliya A; Beutels, Philippe; Postma, Maarten J

    2014-01-01

    Objective This study aims to assess the cost-effectiveness of hepatitis A immunization in Indonesia, including an explicit comparison between one-dose and two-dose vaccines. Methods An age-structured cohort model based on a decision tree was developed for the 2012 Indonesia birth cohort. Using the model, we made a comparison on the use of two-dose and one-dose vaccines. The model involved a 70-year time horizon with 1-month cycles for children less than 2 years old and annually thereafter. Monte Carlo simulations were used to examine the economic acceptability and affordability of the hepatitis A vaccination. Results Vaccination would save US$ 3 795 148 and US$ 2 892 920 from the societal perspective, for the two-dose and one-dose vaccine schedules, respectively, in the context of hepatitis A treatment. It also would save 8917 and 6614 discounted quality-adjusted-life-years (QALYs), respectively. With the vaccine price of US$ 3.21 per dose, the implementation of single dose vaccine would yield an incremental cost-effectiveness ratio (ICER) of US$ 4933 per QALY gained versus no vaccination, whereas the two-dose versus one-dose schedule would cost US$ 14 568 per QALY gained. Considering the 2012 gross-domestic-product (GDP) per capita in Indonesia of US$ 3557, the results indicate that hepatitis A vaccination would be a cost-effective intervention, both for the two-dose and one-dose vaccine schedules in isolation, but two-dose vaccination would no longer be cost-effective if one-dose vaccination is a feasible option. Vaccination would be 100% affordable at budgets of US$ 71 408 000 and US$ 37 690 000 for the implementation of the two-dose and one-dose vaccine schedules, respectively. Conclusions The implementation of hepatitis A vaccination in Indonesia would be a cost-effective health intervention under the market vaccine price. Given the budget limitations, the use of a one-dose-vaccine schedule would be more realistic to be applied than a two

  7. Estimation of reservoir fluid volumes through 4-D seismic analysis on Gullfaks

    Energy Technology Data Exchange (ETDEWEB)

    Veire, H.S.; Reymond, S.B.; Signer, C.; Tenneboe, P.O.; Soenneland, L.; Schlumberger, Geco-Prakla

    1998-12-31

    4-D seismic has the potential to monitor hydrocarbon movement in reservoirs during production, and could thereby supplement the predictions of reservoir parameters offered by the reservoir simulator. However 4-D seismic is often more band limited than the vertical resolution required in the reservoir model. As a consequence the seismic data holds a composite response from reservoir parameter changes during production so that the inversion becomes non-unique. A procedure where data from the reservoir model are integrated with seismic data will be presented. The potential of such a procedure is demonstrated through a case study from a recent 4-D survey over the Gullfaks field. 2 figs.

  8. Coupling a fluid flow simulation with a geomechanical model of a fractured reservoir

    OpenAIRE

    Segura Segarra, José María; Paz, C.M.; de Bayser, M.; Zhang, J.; Bryant, P.W.; Gonzalez, Nubia Aurora; Rodrigues, E.; Vargas, P.E.; Carol, Ignacio; Lakshmikantha, Ramasesha Mookanahallipatna; Das, K. C.; Sandha, S.S.; Cerqueira, R.; Mello,, U.

    2013-01-01

    Improving the reliability of integrated reservoir development planning and addressing subsidence, fault reactivation and other environmental impacts, requires increasingly sophisticated geomechanical models, especially in the case of fractured reservoirs where fracture deformation is strongly coupled with its permeability change. Reservoir simulation has historically treated any geomechanical effects by means of a rock compressibility term/table, which can be improved by simulating the actual...

  9. An empiric estimate of the value of life: updating the renal dialysis cost-effectiveness standard.

    Science.gov (United States)

    Lee, Chris P; Chertow, Glenn M; Zenios, Stefanos A

    2009-01-01

    Proposals to make decisions about coverage of new technology by comparing the technology's incremental cost-effectiveness with the traditional benchmark of dialysis imply that the incremental cost-effectiveness ratio of dialysis is seen a proxy for the value of a statistical year of life. The frequently used ratio for dialysis has, however, not been updated to reflect more recently available data on dialysis. We developed a computer simulation model for the end-stage renal disease population and compared cost, life expectancy, and quality adjusted life expectancy of current dialysis practice relative to three less costly alternatives and to no dialysis. We estimated incremental cost-effectiveness ratios for these alternatives relative to the next least costly alternative and no dialysis and analyzed the population distribution of the ratios. Model parameters and costs were estimated using data from the Medicare population and a large integrated health-care delivery system between 1996 and 2003. The sensitivity of results to model assumptions was tested using 38 scenarios of one-way sensitivity analysis, where parameters informing the cost, utility, mortality and morbidity, etc. components of the model were by perturbed +/-50%. The incremental cost-effectiveness ratio of dialysis of current practice relative to the next least costly alternative is on average $129,090 per quality-adjusted life-year (QALY) ($61,294 per year), but its distribution within the population is wide; the interquartile range is $71,890 per QALY, while the 1st and 99th percentiles are $65,496 and $488,360 per QALY, respectively. Higher incremental cost-effectiveness ratios were associated with older age and more comorbid conditions. Sensitivity to model parameters was comparatively small, with most of the scenarios leading to a change of less than 10% in the ratio. The value of a statistical year of life implied by dialysis practice currently averages $129,090 per QALY ($61,294 per year), but

  10. Are Geotehrmal Reservoirs Stressed Out?

    Science.gov (United States)

    Davatzes, N. C.; Laboso, R. C.; Layland-Bachmann, C. E.; Feigl, K. L.; Foxall, W.; Tabrez, A. R.; Mellors, R. J.; Templeton, D. C.; Akerley, J.

    2017-12-01

    Crustal permeability can be strongly influenced by developing connected networks of open fractures. However, the detailed evolution of a fracture network, its extent, and the persistence of fracture porosity are difficult to analyze. Even in fault-hosted geothermal systems, where heat is brought to the surface from depth along a fault, hydrothermal flow is heterogeneously distributed. This is presumably due to variations in fracture density, connectivity, and attitude, as well as variations in fracture permeability caused by sealing of fractures by precipitated cements or compaction. At the Brady Geothermal field in Nevada, we test the relationship between the modeled local stress state perturbed by dislocations representing fault slip or volume changes in the geothermal reservoir inferred from surface deformation measured by InSAR and the location of successful geothermal wells, hydrothermal activity, and seismicity. We postulate that permeability is favored in volumes that experience positive Coulomb stress changes and reduced compression, which together promote high densities of dilatant fractures. Conversely, permeability can be inhibited in locations where Coulomb stress is reduced, compression promotes compaction, or where the faults are poorly oriented in the stress field and consequently slip infrequently. Over geologic time scales spanning the development of the fault system, these local stress states are strongly influenced by the geometry of the fault network relative to the remote stress driving slip. At shorter time scales, changes in fluid pressure within the fracture network constituting the reservoir cause elastic dilations and contractions. We integrate: (1) direct observations of stress state and fractures in boreholes and the mapped geometry of the fault network; (2) evidence of permeability from surface hydrothermal features, production/injection wells and surface deformations related to pumping history; and (3) seismicity to test the

  11. Geothermal reservoir engineering

    CERN Document Server

    Grant, Malcolm Alister

    2011-01-01

    As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate.  For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference.  This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The bo

  12. Quantifying Multiscale Habitat Structural Complexity: A Cost-Effective Framework for Underwater 3D Modelling

    Directory of Open Access Journals (Sweden)

    Renata Ferrari

    2016-02-01

    Full Text Available Coral reef habitat structural complexity influences key ecological processes, ecosystem biodiversity, and resilience. Measuring structural complexity underwater is not trivial and researchers have been searching for accurate and cost-effective methods that can be applied across spatial extents for over 50 years. This study integrated a set of existing multi-view, image-processing algorithms, to accurately compute metrics of structural complexity (e.g., ratio of surface to planar area underwater solely from images. This framework resulted in accurate, high-speed 3D habitat reconstructions at scales ranging from small corals to reef-scapes (10s km2. Structural complexity was accurately quantified from both contemporary and historical image datasets across three spatial scales: (i branching coral colony (Acropora spp.; (ii reef area (400 m2; and (iii reef transect (2 km. At small scales, our method delivered models with <1 mm error over 90% of the surface area, while the accuracy at transect scale was 85.3% ± 6% (CI. Advantages are: no need for an a priori requirement for image size or resolution, no invasive techniques, cost-effectiveness, and utilization of existing imagery taken from off-the-shelf cameras (both monocular or stereo. This remote sensing method can be integrated to reef monitoring and improve our knowledge of key aspects of coral reef dynamics, from reef accretion to habitat provisioning and productivity, by measuring and up-scaling estimates of structural complexity.

  13. Nagylengyel: an interesting reservoir. [Yugoslovia

    Energy Technology Data Exchange (ETDEWEB)

    Dedinszky, J

    1971-04-01

    The Nagylengyel oil field, discovered in 1951, has oil-producing formations mostly in the Upper-Triassic dolomites, in the Norian-Ractian transition formations, in the Upper-Cretaceous limestones and shales, and in the Miocene. The formation of the reservoir space occurred in many stages. A porous, cavernous fractured reservoir is developed in the Norian principal dolomite. A cavernous fractured reservoir exists in the Cretaceous limestone and in the Cretaceous shale and porous fractured reservoir is developed in the Miocene. The derivation of the model of the reservoir, and the conservative evaluation of the volume of the reservoir made it possible to use secondary recovery.

  14. Fractured reservoir discrete feature network technologies. Final report, March 7, 1996 to September 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Dershowitz, William S.; Einstein, Herbert H.; LaPoint, Paul R.; Eiben, Thorsten; Wadleigh, Eugene; Ivanova, Violeta

    1998-12-01

    This report summarizes research conducted for the Fractured Reservoir Discrete Feature Network Technologies Project. The five areas studied are development of hierarchical fracture models; fractured reservoir compartmentalization, block size, and tributary volume analysis; development and demonstration of fractured reservoir discrete feature data analysis tools; development of tools for data integration and reservoir simulation through application of discrete feature network technologies for tertiary oil production; quantitative evaluation of the economic value of this analysis approach.

  15. Training effectiveness vs. cost effectiveness: The next millennium challenge

    International Nuclear Information System (INIS)

    Coe, Richard P.

    2003-01-01

    With the advent of the new millennium and energy deregulation, organizations will be challenged to be cost competitive and profitable. Deregulation in the US energy industry will force utilities and, more specifically, commercial nuclear power production to unprecedented cost control measures. It will also renew the fires of debate about costs vs. safety. With personnel costs being the single largest expenditure for most organizations management will be faced with constant dilemmas of competition for scarce resources. Salaries, benefits and training costs will be under greater scrutiny. Training resources and programs will face increased pressure to be job related, based on conservative requirements and more cost effective than in the past. For nearly two decades the US National Academy for Nuclear Training (NANT) has developed and used industry-wide accreditation and evaluation standards based on the Systematic Approach to Training (SAT). This process assures that existing and emerging technical training is constantly reviewed and evaluated against standardized criteria to assure job relatedness and enhanced job performance. The process also requires management to approve, actively participate in and support the training of NPP personnel. Instructors must be highly skilled and well trained in the SAT process and various instructional strategies. The SAT process is grounded in five interlocking keystone steps; Analysis - Design - Development - Implementation - Evaluation (ADDIE). Evaluation of training is often said to be the most crucial and most difficult step. Here is where an organization determines if the training is effective and meeting the legitimate needs of all of the stakeholders. This QA/QC aspect of training must be an ongoing process involving management, instructors and the students. It is only through the discipline of an SAT based evaluation process that an organization can truly determine if the training is efficient, effective, cost effective and

  16. On the censored cost-effectiveness analysis using copula information

    Directory of Open Access Journals (Sweden)

    Charles Fontaine

    2017-02-01

    Full Text Available Abstract Background Information and theory beyond copula concepts are essential to understand the dependence relationship between several marginal covariates distributions. In a therapeutic trial data scheme, most of the time, censoring occurs. That could lead to a biased interpretation of the dependence relationship between marginal distributions. Furthermore, it could result in a biased inference of the joint probability distribution function. A particular case is the cost-effectiveness analysis (CEA, which has shown its utility in many medico-economic studies and where censoring often occurs. Methods This paper discusses a copula-based modeling of the joint density and an estimation method of the costs, and quality adjusted life years (QALY in a cost-effectiveness analysis in case of censoring. This method is not based on any linearity assumption on the inferred variables, but on a punctual estimation obtained from the marginal distributions together with their dependence link. Results Our results show that the proposed methodology keeps only the bias resulting statistical inference and don’t have anymore a bias based on a unverified linearity assumption. An acupuncture study for chronic headache in primary care was used to show the applicability of the method and the obtained ICER keeps in the confidence interval of the standard regression methodology. Conclusion For the cost-effectiveness literature, such a technique without any linearity assumption is a progress since it does not need the specification of a global linear regression model. Hence, the estimation of the a marginal distributions for each therapeutic arm, the concordance measures between these populations and the right copulas families is now sufficient to process to the whole CEA.

  17. Cost-effectiveness of minimally invasive sacroiliac joint fusion

    Science.gov (United States)

    Cher, Daniel J; Frasco, Melissa A; Arnold, Renée JG; Polly, David W

    2016-01-01

    Background Sacroiliac joint (SIJ) disorders are common in patients with chronic lower back pain. Minimally invasive surgical options have been shown to be effective for the treatment of chronic SIJ dysfunction. Objective To determine the cost-effectiveness of minimally invasive SIJ fusion. Methods Data from two prospective, multicenter, clinical trials were used to inform a Markov process cost-utility model to evaluate cumulative 5-year health quality and costs after minimally invasive SIJ fusion using triangular titanium implants or non-surgical treatment. The analysis was performed from a third-party perspective. The model specifically incorporated variation in resource utilization observed in the randomized trial. Multiple one-way and probabilistic sensitivity analyses were performed. Results SIJ fusion was associated with a gain of approximately 0.74 quality-adjusted life years (QALYs) at a cost of US$13,313 per QALY gained. In multiple one-way sensitivity analyses all scenarios resulted in an incremental cost-effectiveness ratio (ICER) <$26,000/QALY. Probabilistic analyses showed a high degree of certainty that the maximum ICER for SIJ fusion was less than commonly selected thresholds for acceptability (mean ICER =$13,687, 95% confidence interval $5,162–$28,085). SIJ fusion provided potential cost savings per QALY gained compared to non-surgical treatment after a treatment horizon of greater than 13 years. Conclusion Compared to traditional non-surgical treatments, SIJ fusion is a cost-effective, and, in the long term, cost-saving strategy for the treatment of SIJ dysfunction due to degenerative sacroiliitis or SIJ disruption. PMID:26719717

  18. The cost-effectiveness of rotavirus vaccination in Armenia.

    Science.gov (United States)

    Jit, Mark; Yuzbashyan, Ruzanna; Sahakyan, Gayane; Avagyan, Tigran; Mosina, Liudmila

    2011-11-08

    The cost-effectiveness of introducing infant rotavirus vaccination in Armenia in 2012 using Rotarix(R) was evaluated using a multiple birth cohort model. The model considered the cost and health implications of hospitalisations, primary health care consultations and episodes not leading to medical care in children under five years old. Rotavirus vaccination is expected to cost the Ministry of Health $220,000 in 2012, rising to $830,000 in 2016 following termination of GAVI co-financing, then declining to $260,000 in 2025 due to vaccine price maturity. It may reduce health care costs by $34,000 in the first year, rising to $180,000 by 2019. By 2025, vaccination may be close to cost saving to the Ministry of Health if the vaccine purchase price declines as expected. Once coverage has reached high levels, vaccination may prevent 25,000 cases, 3000 primary care consultations, 1000 hospitalisations and 8 deaths per birth cohort vaccinated. The cost per disability-adjusted life year (DALY) saved is estimated to be about $650 from the perspective of the Ministry of Health, $850 including costs accrued to both the Ministry and to GAVI, $820 from a societal perspective excluding indirect costs and $44 from a societal perspective including indirect costs. Since the gross domestic product per capita of Armenia in 2008 was $3800, rotavirus vaccination is likely to be regarded as "very cost-effective" from a WHO standpoint. Vaccination may still be "very cost-effective" if less favourable assumptions are used regarding vaccine price and disease incidence, as long as DALYs are not age-weighted. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. Cost-Effectiveness of the Freeze-All Policy.

    Science.gov (United States)

    Roque, Matheus; Valle, Marcello; Guimarães, Fernando; Sampaio, Marcos; Geber, Selmo

    2015-08-01

    To evaluate the cost-effectiveness of freeze-all cycles when compared to fresh embryo transfer. This was an observational study with a cost-effectiveness analysis. The analysis consisted of 530 intracytoplasmic sperm injection (ICSI) cycles in a private center in Brazil between January 2012 and December 2013. A total of 530 intracytoplasmic sperm injection (ICSI) cycles - 351 fresh embryo transfers and 179 freeze-all cycles - with a gonadotropin-releasing hormone (GnRH) antagonist protocol and day 3 embryo transfers. The pregnancy rate was 31.1% in the fresh group and 39.7% in the freeze-all group. We performed two scenario analyses for costs. In scenario 1, we included those costs associated with the ICSI cycle (monitoring during controlled ovarian stimulation [COS], oocyte retrieval, embryo transfer, IVF laboratory, and medical costs), embryo cryopreservation of supernumerary embryos, hormone measurements during COS and endometrial priming, medication use (during COS, endometrial priming, and luteal phase support), ultrasound scan for frozen- thawed embryo transfer (FET), obstetric ultrasounds, and miscarriage. The total cost (in USD) per pregnancy was statistically lower in the freeze-all cycles (19,156.73 ± 1,732.99) when compared to the fresh cycles (23,059.72 ± 2,347.02). Even in Scenario 2, when charging all of the patients in the freeze-all group for cryopreservation (regardless of supernumerary embryos) and for FET, the fresh cycles had a statistically significant increase in treatment costs per ongoing pregnancy. The results presented in this study suggest that the freeze-all policy is a cost-effective strategy when compared to fresh embryo transfer.

  20. Cost effectiveness of adopted quality requirements in hospital laboratories.

    Science.gov (United States)

    Hamza, Alneil; Ahmed-Abakur, Eltayib; Abugroun, Elsir; Bakhit, Siham; Holi, Mohamed

    2013-01-01

    The present study was designed in quasi-experiment to assess adoption of the essential clauses of particular clinical laboratory quality management requirements based on international organization for standardization (ISO 15189) in hospital laboratories and to evaluate the cost effectiveness of compliance to ISO 15189. The quality management intervention based on ISO 15189 was conceded through three phases; pre - intervention phase, Intervention phase and Post-intervention phase. In pre-intervention phase the compliance to ISO 15189 was 49% for study group vs. 47% for control group with P value 0.48, while the post intervention results displayed 54% vs. 79% for study group and control group respectively in compliance to ISO 15189 and statistically significant difference (P value 0.00) with effect size (Cohen's d) of (0.00) in pre-intervention phase and (0.99) in post - intervention phase. The annual average cost per-test for the study group and control group was 1.80 ± 0.25 vs. 1.97 ± 0.39, respectively with P value 0.39 whereas the post-intervention results showed that the annual average total costs per-test for study group and control group was 1.57 ± 0.23 vs 2.08 ± 0.38, P value 0.019 respectively, with cost-effectiveness ratio of (0.88) in pre -intervention phase and (0.52) in post-intervention phase. The planned adoption of quality management requirements (QMS) in clinical laboratories had great effect to increase the compliance percent with quality management system requirement, raise the average total cost effectiveness, and improve the analytical process capability of the testing procedure.

  1. Cost-effectiveness of pharmacotherapy to reduce obesity.

    Directory of Open Access Journals (Sweden)

    J Lennert Veerman

    Full Text Available AIMS: Obesity causes a high disease burden in Australia and across the world. We aimed to analyse the cost-effectiveness of weight reduction with pharmacotherapy in Australia, and to assess its potential to reduce the disease burden due to excess body weight. METHODS: We constructed a multi-state life-table based Markov model in Excel in which body weight influences the incidence of stroke, ischemic heart disease, hypertensive heart disease, diabetes mellitus, osteoarthritis, post-menopausal breast cancer, colon cancer, endometrial cancer and kidney cancer. We use data on effectiveness identified from PubMed searches, on mortality from Australian Bureau of Statistics, on disease costs from the Australian Institute of Health and Welfare, and on drug costs from the Department of Health and Ageing. We evaluate 1-year pharmacological interventions with sibutramine and orlistat targeting obese Australian adults free of obesity-related disease. We use a lifetime horizon for costs and health outcomes and a health sector perspective for costs. Incremental Cost-Effectiveness Ratios (ICERs below A$50 000 per Disability Adjusted Life Year (DALY averted are considered good value for money. RESULTS: The ICERs are A$130 000/DALY (95% uncertainty interval [UI] 93 000-180 000 for sibutramine and A$230 000/DALY (170 000-340 000 for orlistat. The interventions reduce the body weight-related disease burden at the population level by 0.2% and 0.1%, respectively. Modest weight loss during the interventions, rapid post-intervention weight regain and low adherence limit the health benefits. CONCLUSIONS: Treatment with sibutramine or orlistat is not cost-effective from an Australian health sector perspective and has a negligible impact on the total body weight-related disease burden.

  2. Cost-effective analysis of unilateral vestibular weakness investigation.

    Science.gov (United States)

    Gandolfi, Michele M; Reilly, Erin K; Galatioto, Jessica; Judson, Randy B; Kim, Ana H

    2015-02-01

    To evaluate the cost-effectiveness of obtaining a magnetic resonance imaging (MRI) in patients with abnormal electronystagmography (ENG) or videonystagmography (VNG) results. Retrospective chart review. Academic specialty center. Patients presenting with vertigo between January 1, 2010, and August 30, 2013. Patients who fit the following abnormal criteria were included in the study: unilateral caloric weakness (≥20%), abnormal ocular motor testing, and nystagmus on positional testing. Patients with abnormal findings who then underwent MRI with gadolinium were evaluated. Of the 1,996 charts reviewed, there were 1,358 patients who met the inclusion criteria. The average age of these patients was 62 years (12-94 yr). The male:female ratio was approximately 1:2. Of the 1,358 patients, 253 received an MRI with the following pathologies: four vestibular schwannomas, three subcortical/periventricular white matter changes suspicious for demyelinating disease, four acute cerebellar/posterior circulation infarct, two vertebral artery narrowing, one pseudomeningocele of internal auditory canal, and two white matter changes indicative of migraines. The positive detection rate on MRI was 5.5% based on MRI findings of treatable pathologies causing vertigo. Average cost of an MRI is $1,200, thereby making the average cost of identifying a patient with a positive MRI finding $15,180. In our study, those patients with a positive MRI had a constellation of symptoms and findings (asymmetric sensorineural hearing loss, tinnitus, vertigo, and abnormal ENG/VNG). Cost-effectiveness can be improved by ordering an MRI only when clinical examination and VNG point toward a central pathology. Clinical examination and appropriate testing should be factored when considering the cost-effectiveness of obtaining an MRI in patients with abnormal ENG/VNG findings.

  3. Design of a cost-effective laser spot tracker

    Science.gov (United States)

    Artan, Göktuǧ Gencehan; Sari, Hüseyin

    2017-05-01

    One of the most important aspects of guided systems is detection. The most convenient detection in the sense of precision can be achieved with a laser spot tracker. This study deals with a military grade, high performance and cost-effective laser spot tracker for a guided system. The aim is to develop a high field of view system that will detect a laser spot from a distance of 3 kilometers in which the target is designated from 3 kilometers with a laser. The study basically consists of the system design, modeling, producing and the conducting performance tests of the whole system.

  4. Preoperative localization of parathyroid adenomas is cost-effective

    International Nuclear Information System (INIS)

    Wilson, M.A.; Mack, E.; Rowe, B.; Perlman, S.B.

    1986-01-01

    The preoperative localization of parathyroid adenomas is cost-effective because it reduces anesthesia and surgery times. The technique is sensitive in single and double adenomas (90%), and some surgeons have modified their operative technique because of its introduction. The practical experience of one surgeon is presented, with similar patient subsets (n = 22) compared before and after use of a localization scan was instituted. The average operative time fell by 94%, from 2 hours 35 minutes to 1 hour 19 minutes. The reduction in operative time was possible because the surgeon did not seek to identify the remaining normal parathyroids when the scanned lesion was excised and proved to be the adenoma

  5. Cost effectiveness of a protocol using palivizumab in preterm infants

    Directory of Open Access Journals (Sweden)

    Yolanda Hernández-Gago

    2017-03-01

    Full Text Available Objective: The main objective was to evaluate the cost-effectiveness of protocol use of palivizumab in premature established by consensus in our Hospital comparing it based on the recommendations of various Scientific Societies. As a secondary objective risk factors and severity of hospitalized patients attending the established protocol in our Hospital were analyzed. Methods: The study period was 4 seasons with the expanded protocol (retrospective data versus 2 with restricted or agreed protocol (prospective data. The perspective of the study was the Health System, including the costs of hospitalization and palivizumab our center. The calculation of the effectiveness was determined with the admission rate of premature patients stratified by weeks of gestational age <29, <32; and <35. For the analysis of risk factors and severity in patients admitted seasons with the new protocol are collected prospectively clinical data and environmental and social factors. Results: In the range of gestational age <29 years old and <32 greater effectiveness of the extended protocol was not demonstrated against the consensus. Only more effective for EG <35 in the accumulated data and comparing seasons 12/13 and 08/09 to 13/14 for individual data was observed. This range has an associated incremental cost effectiveness ratio of € 53 250,07 (range: € 14 793,39 to € 90 446,47 for singles data and € 50 525,53 (€ 28 688.22 to € 211 575,65 for accumulated. The establishment of this protocol in our center meant an average saving per season € 169 911,51. A cost- effectiveness of the extended protocol appropriate relationship is found if the cost of palivizumab per patient was less than € 1 206,67 (calculated for maximum use of the vial and a higher rate of hospitalization of 9.21%. Children entering the season with the new protocol (season 12/13 and 13/14 are 63.4% in children under 3 months and 90% are term infants who do not belong to any population at

  6. Operating dedicated data centers – is it cost-effective?

    International Nuclear Information System (INIS)

    Ernst, M; Hogue, R; Hollowell, C; Strecker-Kellog, W; Wong, A; Zaytsev, A

    2014-01-01

    The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.

  7. Operating Dedicated Data Centers - Is It Cost-Effective?

    Science.gov (United States)

    Ernst, M.; Hogue, R.; Hollowell, C.; Strecker-Kellog, W.; Wong, A.; Zaytsev, A.

    2014-06-01

    The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.

  8. Cost-effectiveness in fall prevention for older women

    OpenAIRE

    Hektoen, Liv F.; Aas, Eline; Lurås, Hilde

    2009-01-01

    Artikkelen beskriver en studie hvor hensikten var å estimere kostnadseffekten av fallforebygging for hjemmeboende eldre kvinner i Norge. The aim of this study was to estimate the cost-effectiveness of implementing an exercise-based fall prevention programme for home-dwelling women in the 80-year age group in Norway. Methods: the impact of the home-based individual exercise programme on the number of falls is based on a New Zealand study. On the basis of the cost estimates and the estimate...

  9. Cost effective tools for soil organic carbon monitoring

    Science.gov (United States)

    Shepherd, Keith; Aynekulu, Ermias

    2013-04-01

    There is increasing demand for data on soil properties at fine spatial resolution to support management and planning decisions. Measurement of soil organic carbon has attracted much interest because (i) soil organic carbon is widely cited as a useful indicator of soil condition and (ii) of the importance of soil carbon in the global carbon cycle and climate mitigation strategies. However in considering soil measurement designs there has been insufficient attention given to careful analysis of the specific decisions that the measurements are meant to support and on what measurements have high information value for decision-making. As a result, much measurement effort may be wasted or focused on the wrong variables. A cost-effective measurement is one that reduces risk in decisions and does not cost more than the societal returns to additional evidence. A key uncertainty in measuring soil carbon as a soil condition indicator is what constitutes a good or bad level of carbon on a given soil. A measure of soil organic carbon concentration may have limited value for informing management decisions without the additional information required to interpret it, and so expending further efforts on improving measurements to increase precision may then have no value to improving the decision. Measuring soil carbon stock changes for carbon trading purposes requires high levels of measurement precision but there is still large uncertainty on whether the costs of measurement exceed the benefits. Since the largest cost component in soil monitoring is often travel to the field and physically sampling soils, it is generally cost-effective to meet multiple objectives by analysing a number of properties on a soil sample. Diffuse reflectance infrared spectroscopy is playing a key role in allowing multiple soil properties to be determined rapidly and at low cost. The method provides estimation of multiple soil properties (e.g. soil carbon, texture and mineralogy) in one measurement

  10. Dynamic modeling of cost-effectiveness of rotavirus vaccination, Kazakhstan.

    Science.gov (United States)

    Freiesleben de Blasio, Birgitte; Flem, Elmira; Latipov, Renat; Kuatbaeva, Ajnagul; Kristiansen, Ivar Sønbø

    2014-01-01

    The government of Kazakhstan, a middle-income country in Central Asia, is considering the introduction of rotavirus vaccination into its national immunization program. We performed a cost-effectiveness analysis of rotavirus vaccination spanning 20 years by using a synthesis of dynamic transmission models accounting for herd protection. We found that a vaccination program with 90% coverage would prevent ≈880 rotavirus deaths and save an average of 54,784 life-years for children vaccine cost at vaccination program costs would be entirely offset. To further evaluate efficacy of a vaccine program, benefits of indirect protection conferred by vaccination warrant further study.

  11. Cost-effectiveness studies as part of an ALARA program

    International Nuclear Information System (INIS)

    Baum, J.W.

    1986-01-01

    Recent studies of cost effectiveness of engineering modifications for dose reduction at nuclear power plants conducted at BNL will be considered in this report. Since each of these items has the potential for a 50% to 60% reduction in collective dose, it appears there is large potential for dose reduction from engineering type modifications. The question that must be answered for each plant is ''which modifications or improvements are required for optimization (ALARA). The purpose of this paper is to illustrate that quantified optimization need not be costly and can often be highly beneficial

  12. The cost - effective solar energy applications in Canada

    International Nuclear Information System (INIS)

    Pape, A.

    1999-01-01

    This paper outlines several cost-effective solar energy application in Canada, and estimates the GHG emission reduction potential for each. The applications include: (1) passive solar building design; (2) solar water heating applications; (3) solar photovoltaics for remote power; and (4) solar assisted space heating and cooling in industrial buildings. Each technology is briefly profiled in terms of functionality, cost characteristics, energy production characteristics and potential emission reduction benefits. Real-life examples of each application are also included. Finally, the paper concludes on the potential role of solar energy in the reduction of Canadian GHG emissions. (author)

  13. A compact cost-effective beamline for a PET Cyclotron

    International Nuclear Information System (INIS)

    Dehnel, M.P.; Jackle, P.; Roeder, M.; Stewart, T.; Theroux, J.; Brasile, J.P.; Sirot, P.; Buckley, K.R.; Bedue, M.

    2007-01-01

    Most commercial PET Cyclotrons have targets mounted on or near the main cyclotron vacuum chamber. There is often little or no system capability for centering or focusing the extracted beam on target to achieve maximum production. This paper describes the ion-optics, design and development of a compact cost-effective beamline comprised of low activation and radiation resistant materials. The beamline, complete with suitable diagnostic devices, permits the extracted proton beam to be centered (X-Y steering magnet), and focused (quadrupole doublet) on target eliminating unnecessary beamspill and ensuring high production

  14. Cost-effectiveness of minimally invasive sacroiliac joint fusion

    Directory of Open Access Journals (Sweden)

    Cher DJ

    2015-12-01

    Full Text Available Daniel J Cher,1 Melissa A Frasco,2 Renée JG Arnold,2,3 David W Polly4,5 1Clinical Affairs, SI-BONE, Inc., San Jose, CA, USA; 2Division of Health Economics and Outcomes Research, Quorum Consulting, Inc., San Francisco, CA, USA; 3Department of Preventive Medicine, Icahn School of Medicine at Mount Sinai, New York, NY, USA; 4Department of Orthopaedic Surgery, University of Minnesota, Minneapolis, MN, USA; 5Department of Neurosurgery, University of Minnesota, Minneapolis, MN, USA Background: Sacroiliac joint (SIJ disorders are common in patients with chronic lower back pain. Minimally invasive surgical options have been shown to be effective for the treatment of chronic SIJ dysfunction. Objective: To determine the cost-effectiveness of minimally invasive SIJ fusion. Methods: Data from two prospective, multicenter, clinical trials were used to inform a Markov process cost-utility model to evaluate cumulative 5-year health quality and costs after minimally invasive SIJ fusion using triangular titanium implants or non-surgical treatment. The analysis was performed from a third-party perspective. The model specifically incorporated variation in resource utilization observed in the randomized trial. Multiple one-way and probabilistic sensitivity analyses were performed. Results: SIJ fusion was associated with a gain of approximately 0.74 quality-adjusted life years (QALYs at a cost of US$13,313 per QALY gained. In multiple one-way sensitivity analyses all scenarios resulted in an incremental cost-effectiveness ratio (ICER <$26,000/QALY. Probabilistic analyses showed a high degree of certainty that the maximum ICER for SIJ fusion was less than commonly selected thresholds for acceptability (mean ICER =$13,687, 95% confidence interval $5,162–$28,085. SIJ fusion provided potential cost savings per QALY gained compared to non-surgical treatment after a treatment horizon of greater than 13 years. Conclusion: Compared to traditional non-surgical treatments

  15. Cost-effectiveness in the mitigation of green house gases

    International Nuclear Information System (INIS)

    Rey, Francisco Carlos

    2009-01-01

    This paper analyzes the cost-effectiveness in the mitigation of green house gases from solar, eolic and nuclear energy sources, concluding that nuclear is, not doubt, the mos efficient. On the other hand, nuclear is the unique source that can be installed without limit in magnitude and in the proximity of the demand, and is for all these reasons that several environmental referents in the world have changed their perception on this source and defend it as the unique actual alternative to fight against the emission of green house gases. (author) [es

  16. Cost effective treatment for wet FGD scrubber bleedoff

    Energy Technology Data Exchange (ETDEWEB)

    Janecek, K.F. [EIMCO Process Equipment Company, Salt Lake City, UT (United States); Kim, J.Y. [Samkook Corporation, Seoul (Korea, Democratic People`s Republic of)

    1994-12-31

    The dewatering of scrubber bleedoff gypsum is a thoroughly proven technology, whether for production of wallboard grade gypsum or environmentally responsible land fill. Careful review of the technology options will show which one is the most effective for the specific plant site. Likewise, a recipe for wastewater treatment for heavy metals removal can be found that will meet local regulatory limits. EIMCO has worldwide experience in FGD gypsum sludge dewatering and wastewater treatment. Contacting EIMCO can be the most important step toward a practical cost effective system for handling FGD scrubber bleed slurries.

  17. Cost Effective Polymer Solar Cells Research and Education

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Sam-Shajing [Norfolk State Univ, Norfolk, VA (United States)

    2015-10-13

    The technical or research objective of this project is to investigate and develop new polymers and polymer based optoelectronic devices for potentially cost effective (or cost competitive), durable, lightweight, flexible, and high efficiency solar energy conversion applications. The educational objective of this project includes training of future generation scientists, particularly young, under-represented minority scientists, working in the areas related to the emerging organic/polymer based solar energy technologies and related optoelectronic devices. Graduate and undergraduate students will be directly involved in scientific research addressing issues related to the development of polymer based solar cell technology.

  18. Is aggressive treatment of traumatic brain injury cost-effective?

    Science.gov (United States)

    Whitmore, Robert G; Thawani, Jayesh P; Grady, M Sean; Levine, Joshua M; Sanborn, Matthew R; Stein, Sherman C

    2012-05-01

    The object of this study was to determine whether aggressive treatment of severe traumatic brain injury (TBI), including invasive intracranial monitoring and decompressive craniectomy, is cost-effective. A decision-analytical model was created to compare costs, outcomes, and cost-effectiveness of 3 strategies for treating a patient with severe TBI. The aggressive-care approach is compared with "routine care," in which Brain Trauma Foundation guidelines are not followed. A "comfort care" category, in which a single day in the ICU is followed by routine floor care, is included for comparison only. Probabilities of each treatment resulting in various Glasgow Outcome Scale (GOS) scores were obtained from the literature. The GOS scores were converted to quality-adjusted life years (QALYs), based on expected longevity and calculated quality of life associated with each GOS category. Estimated direct (acute and long-term medical care) and indirect (loss of productivity) costs were calculated from the perspective of society. Sensitivity analyses employed a 2D Monte Carlo simulation of 1000 trials, each with 1000 patients. The model was also used to estimate these values for patients 40, 60, and 80 years of age. For the average 20-year-old, aggressive care yields 11.7 (± 1.6 [SD]) QALYs, compared with routine care (10.0 ± 1.5 QALYs). This difference is highly significant (p care remains significantly better at all ages. When all costs are considered, aggressive care is also significantly less costly than routine care ($1,264,000 ± $118,000 vs $1,361,000 ± $107,000) for the average 20-year-old. Aggressive care remains significantly less costly until age 80, at which age it costs more than routine care. However, even in the 80-year-old, aggressive care is likely the more cost-effective approach. Comfort care is associated with poorer outcomes at all ages and with higher costs for all groups except 80-year-olds. When all the costs of severe TBI are considered, aggressive

  19. Modelling the cost effectiveness of antidepressant treatment in primary care.

    Science.gov (United States)

    Revicki, D A; Brown, R E; Palmer, W; Bakish, D; Rosser, W W; Anton, S F; Feeny, D

    1995-12-01

    The aim of this study was to estimate the cost effectiveness of nefazodone compared with imipramine or fluoxetine in treating women with major depressive disorder. Clinical decision analysis and a Markov state-transition model were used to estimate the lifetime health outcomes and medical costs of 3 antidepressant treatments. The model, which represents ideal primary care practice, compares treatment with nefazodone to treatment with either imipramine or fluoxetine. The economic analysis was based on the healthcare system of the Canadian province of Ontario, and considered only direct medical costs. Health outcomes were expressed as quality-adjusted life years (QALYs) and costs were in 1993 Canadian dollars ($Can; $Can1 = $US0.75, September 1995). Incremental cost-utility ratios were calculated comparing the relative lifetime discounted medical costs and QALYs associated with nefazodone with those of imipramine or fluoxetine. Data for constructing the model and estimating necessary parameters were derived from the medical literature, clinical trial data, and physician judgement. Data included information on: Ontario primary care physicians' clinical management of major depression; medical resource use and costs; probabilities of recurrence of depression; suicide rates; compliance rates; and health utilities. Estimates of utilities for depression-related hypothetical health states were obtained from patients with major depression (n = 70). Medical costs and QALYs were discounted to present value using a 5% rate. Sensitivity analyses tested the assumptions of the model by varying the discount rate, depression recurrence rates, compliance rates, and the duration of the model. The base case analysis found that nefazodone treatment costs $Can1447 less per patient than imipramine treatment (discounted lifetime medical costs were $Can50,664 vs $Can52,111) and increases the number of QALYs by 0.72 (13.90 vs 13.18). Nefazodone treatment costs $Can14 less than fluoxetine

  20. Male circumcision at different ages in Rwanda: a cost-effectiveness study.

    Directory of Open Access Journals (Sweden)

    Agnes Binagwaho

    2010-01-01

    -saving (the cost-effectiveness ratio is negative, even though savings from infant circumcision will be realized later in time. The cost per infection averted is US$3,932 for adolescent MC and US$4,949 for adult MC. Results for infant MC appear robust. Infant MC remains highly cost-effective across a reasonable range of variation in the base case scenario. Adolescent MC is highly cost-effective for the base case scenario but this high cost-effectiveness is not robust to small changes in the input variables. Adult MC is neither cost-saving nor highly cost-effective when considering only the direct benefit for the circumcised man. CONCLUSIONS: The study suggests that Rwanda should be simultaneously scaling up circumcision across a broad range of age groups, with high priority to the very young. Infant MC can be integrated into existing health services (i.e., neonatal visits and vaccination sessions and over time has better potential than adolescent and adult circumcision to achieve the very high coverage of the population required for maximal reduction of HIV incidence. In the presence of infant MC, adolescent and adult MC would evolve into a "catch-up" campaign that would be needed at the start of the program but would eventually become superfluous. Please see later in the article for the Editors' Summary.

  1. Parallel reservoir simulator computations

    International Nuclear Information System (INIS)

    Hemanth-Kumar, K.; Young, L.C.

    1995-01-01

    The adaptation of a reservoir simulator for parallel computations is described. The simulator was originally designed for vector processors. It performs approximately 99% of its calculations in vector/parallel mode and relative to scalar calculations it achieves speedups of 65 and 81 for black oil and EOS simulations, respectively on the CRAY C-90

  2. unconventional natural gas reservoirs

    International Nuclear Information System (INIS)

    Correa G, Tomas F; Osorio, Nelson; Restrepo R, Dora P

    2009-01-01

    This work is an exploration about different unconventional gas reservoirs worldwide: coal bed methane, tight gas, shale gas and gas hydrate? describing aspects such as definition, reserves, production methods, environmental issues and economics. The overview also mentioned preliminary studies about these sources in Colombia.

  3. INNOVATIVE MIOR PROCESS UTILIZING INDIGENOUS RESERVOIR CONSTITUENTS

    Energy Technology Data Exchange (ETDEWEB)

    D.O. Hitzman; A.K. Stepp; D.M. Dennis; L.R. Graumann

    2003-09-01

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions and technologies for improving oil production. The goal was to identify and utilize indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. Experimental laboratory work in model sandpack cores was conducted using microbial cultures isolated from produced water samples. Comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents were conducted in sand packs with natural field waters using cultures and conditions representative of oil reservoirs. Increased oil recovery in multiple model sandpack systems was achieved and the technology and results were verified by successful field studies. Direct application of the research results has lead to the development of a feasible, practical, successful, and cost-effective technology which increases oil recovery. This technology is now being commercialized and applied in numerous field projects to increase oil recovery. Two field applications of the developed technology reported production increases of 21% and 24% in oil recovery.

  4. Interdisciplinary study of reservoir compartments and heterogeneity. Final report, October 1, 1993--December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Van Kirk, C.

    1998-01-01

    A case study approach using Terry Sandstone production from the Hambert-Aristocrat Field, Weld County, Colorado was used to document the process of integration. One specific project goal is to demonstrate how a multidisciplinary approach can be used to detect reservoir compartmentalization and improve reserve estimates. The final project goal is to derive a general strategy for integration for independent operators. Teamwork is the norm for the petroleum industry where teams of geologists, geophysicists, and petroleum engineers work together to improve profits through a better understanding of reservoir size, compartmentalization, and orientation as well as reservoir flow characteristics. In this manner, integration of data narrows the uncertainty in reserve estimates and enhances reservoir management decisions. The process of integration has proven to be iterative. Integration has helped identify reservoir compartmentalization and reduce the uncertainty in the reserve estimates. This research report documents specific examples of integration and the economic benefits of integration.

  5. Cost-effectiveness criteria for marine oil spill preventive measures

    International Nuclear Information System (INIS)

    Vanem, Erik; Endresen, Oyvind; Skjong, Rolf

    2008-01-01

    Oil tanker accidents resulting in large quantities of oil spills and severe pollution have occurred in the past, leading to major public attention and an international focus on finding solutions for minimising the risks related to such events. This paper proposes a novel approach for evaluating measures for prevention and control of marine oil spills, based on considerations of oil spill risk and cost effectiveness. A cost model that incorporates all costs of a shipping accident has been established and oil tanker spill accidents have been further elaborated as a special case of such accidents. Utilising this model, novel implementation criteria, in terms of the Cost of Averting a Tonne of oil Spilt (CATS), for risk control options aiming at mitigating the environmental risk of accidental oil spills, are proposed. The paper presents a review of previous studies on the costs associated with oil spills from shipping, which is a function of many factors such as location of spill, spill amount, type of oil, etc. However, ships are designed for global trade, transporting different oil qualities. Therefore, globally applicable criteria must average over most of these factors, and the spill amount is the remaining factor that will be used to measure cost effectiveness against. A weighted, global average cleanup cost of USD 16,000/tonne of oil spilt has been calculated, considering the distribution of oil tanker traffic densities. Finally, the criteria are compared with some existing regulations for oil spill prevention, response and compensation (OPA 90)

  6. Selecting cost-effective areas for restoration of ecosystem services.

    Science.gov (United States)

    Adame, M F; Hermoso, V; Perhans, K; Lovelock, C E; Herrera-Silveira, J A

    2015-04-01

    Selection of areas for restoration should be based on cost-effectiveness analysis to attain the maximum benefit with a limited budget and overcome the traditional ad hoc allocation of funds for restoration projects. Restoration projects need to be planned on the basis of ecological knowledge and economic and social constraints. We devised a novel approach for selecting cost-effective areas for restoration on the basis of biodiversity and potential provision of 3 ecosystem services: carbon storage, water depuration, and coastal protection. We used Marxan, a spatial prioritization tool, to balance the provision of ecosystem services against the cost of restoration. We tested this approach in a mangrove ecosystem in the Caribbean. Our approach efficiently selected restoration areas that at low cost were compatible with biodiversity targets and that maximized the provision of one or more ecosystem services. Choosing areas for restoration of mangroves on the basis carbon storage potential, largely guaranteed the restoration of biodiversity and other ecosystem services. © 2014 Society for Conservation Biology.

  7. Dynamic Modeling of Cost-effectiveness of Rotavirus Vaccination, Kazakhstan

    Science.gov (United States)

    Flem, Elmira; Latipov, Renat; Kuatbaeva, Ajnagul; Kristiansen, Ivar Sønbø

    2014-01-01

    The government of Kazakhstan, a middle-income country in Central Asia, is considering the introduction of rotavirus vaccination into its national immunization program. We performed a cost-effectiveness analysis of rotavirus vaccination spanning 20 years by using a synthesis of dynamic transmission models accounting for herd protection. We found that a vaccination program with 90% coverage would prevent ≈880 rotavirus deaths and save an average of 54,784 life-years for children <5 years of age. Indirect protection accounted for 40% and 60% reduction in severe and mild rotavirus gastroenteritis, respectively. Cost per life year gained was US $18,044 from a societal perspective and US $23,892 from a health care perspective. Comparing the 2 key parameters of cost-effectiveness, mortality rates and vaccine cost at

  8. Cost-effectiveness of minimally invasive sacroiliac joint fusion.

    Science.gov (United States)

    Cher, Daniel J; Frasco, Melissa A; Arnold, Renée Jg; Polly, David W

    2016-01-01

    Sacroiliac joint (SIJ) disorders are common in patients with chronic lower back pain. Minimally invasive surgical options have been shown to be effective for the treatment of chronic SIJ dysfunction. To determine the cost-effectiveness of minimally invasive SIJ fusion. Data from two prospective, multicenter, clinical trials were used to inform a Markov process cost-utility model to evaluate cumulative 5-year health quality and costs after minimally invasive SIJ fusion using triangular titanium implants or non-surgical treatment. The analysis was performed from a third-party perspective. The model specifically incorporated variation in resource utilization observed in the randomized trial. Multiple one-way and probabilistic sensitivity analyses were performed. SIJ fusion was associated with a gain of approximately 0.74 quality-adjusted life years (QALYs) at a cost of US$13,313 per QALY gained. In multiple one-way sensitivity analyses all scenarios resulted in an incremental cost-effectiveness ratio (ICER) dysfunction due to degenerative sacroiliitis or SIJ disruption.

  9. Carbon footprint and cost-effectiveness of cataract surgery.

    Science.gov (United States)

    Venkatesh, Rengaraj; van Landingham, Suzanne W; Khodifad, Ashish M; Haripriya, Aravind; Thiel, Cassandra L; Ramulu, Pradeep; Robin, Alan L

    2016-01-01

    This article raises awareness about the cost-effectiveness and carbon footprint of various cataract surgery techniques, comparing their relative carbon emissions and expenses: manual small-incision cataract surgery (MSICS), phacoemulsification, and femtosecond laser-assisted cataract surgery. As the most commonly performed surgical procedure worldwide, cataract surgery contributes significantly to global climate change. The carbon footprint of a single phacoemulsification cataract surgery is estimated to be comparable to that of a typical person's life for 1 week. Phacoemulsification has been estimated to be between 1.4 and 4.7 times more expensive than MSICS; however, given the lower degree of postoperative astigmatism and other potential complications, phacoemulsification may still be preferable to MSICS in relatively resource-rich settings requiring high levels of visual function. Limited data are currently available regarding the environmental and financial impact of femtosecond laser-assisted cataract surgery; however, in its current form, it appears to be the least cost-effective option. Cataract surgery has a high value to patients. The relative environmental impact and cost of different types of cataract surgery should be considered as this treatment becomes even more broadly available globally and as new technologies are developed and implemented.

  10. Simulating school closure policies for cost effective pandemic decision making

    Directory of Open Access Journals (Sweden)

    Araz Ozgur M

    2012-06-01

    Full Text Available Abstract Background Around the globe, school closures were used sporadically to mitigate the 2009 H1N1 influenza pandemic. However, such closures can detrimentally impact economic and social life. Methods Here, we couple a decision analytic approach with a mathematical model of influenza transmission to estimate the impact of school closures in terms of epidemiological and cost effectiveness. Our method assumes that the transmissibility and the severity of the disease are uncertain, and evaluates several closure and reopening strategies that cover a range of thresholds in school-aged prevalence (SAP and closure durations. Results Assuming a willingness to pay per quality adjusted life-year (QALY threshold equal to the US per capita GDP ($46,000, we found that the cost effectiveness of these strategies is highly dependent on the severity and on a willingness to pay per QALY. For severe pandemics, the preferred strategy couples the earliest closure trigger (0.5% SAP with the longest duration closure (24 weeks considered. For milder pandemics, the preferred strategies also involve the earliest closure trigger, but are shorter duration (12 weeks for low transmission rates and variable length for high transmission rates. Conclusions These findings highlight the importance of obtaining early estimates of pandemic severity and provide guidance to public health decision-makers for effectively tailoring school closures strategies in response to a newly emergent influenza pandemic.

  11. Cost effectiveness of reducing radon exposure in Spanish dwellings

    International Nuclear Information System (INIS)

    Colgan, P.A.; Gutierrez, J.

    1996-01-01

    Published information on the distribution of radon levels in Spanish single family dwellings is used to evaluate the cost-effectiveness of three different intervention scenarios: remediation of existing dwellings, radon proofing of all future dwellings and the targetting of areas with higher than average indoor radon concentrations. Analysis is carried out on the basis of a Reference Level of 400 Bq m -3 for the existing housing stock and 200 Bq m -3 for new dwellings. Certain assumptions are made about the effectiveness and durability of the measures applied and annualised costs are used to calculate the costs per lung cancer death averted. The results reveal that targetting future housing is a more cost-effective option than remediation of existing dwellings with radon concentrations above the Reference Level -the costs per lung cancer death averted are typically $145000. In high-risk areas, these costs can be considerably less, depending on the percentage of dwellings expected to exceed the Reference Level and the average savings in exposure as a result of the intervention. The costs of intervention to reduce lung cancer deaths following exposure to radon compare favourably with those of other health programmes in other countries. (Author)

  12. Cost-effectiveness assessment in outpatient sinonasal surgery.

    Science.gov (United States)

    Mortuaire, G; Theis, D; Fackeure, R; Chevalier, D; Gengler, I

    2018-02-01

    To assess the cost-effectiveness of outpatient sinonasal surgery in terms of clinical efficacy and control of expenses. A retrospective study was conducted from January 2014 to January 2016. Patients scheduled for outpatient sinonasal surgery were systematically included. Clinical data were extracted from surgical and anesthesiology computer files. The cost accounting methods applied in our institution were used to evaluate logistic and technical costs. The standardized hospital fees rating system based on hospital stay and severity in diagnosis-related groups (Groupes homogènes de séjours: GHS) was used to estimate institutional revenue. Over 2years, 927 outpatient surgical procedures were performed. The crossover rate to conventional hospital admission was 2.9%. In a day-1 telephone interview, 85% of patients were very satisfied with the procedure. All outpatient cases showed significantly lower costs than estimated for conventional management with overnight admission, while hospital revenue did not differ between the two. This study confirmed the efficacy of outpatient surgery in this indication. Lower costs could allow savings for the health system by readjusting the rating for the procedure. More precise assessment of cost-effectiveness will require more fine-grained studies based on micro costing at hospital level and assessment of impact on conventional surgical activity and post-discharge community care. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  13. Cost-effectiveness Analysis Appraisal and Application: An Emergency Medicine Perspective.

    Science.gov (United States)

    April, Michael D; Murray, Brian P

    2017-06-01

    Cost-effectiveness is an important goal for emergency care delivery. The many diagnostic, treatment, and disposition decisions made in the emergency department (ED) have a significant impact upon healthcare resource utilization. Cost-effectiveness analysis (CEA) is an analytic tool to optimize these resource allocation decisions through the systematic comparison of costs and effects of alternative healthcare decisions. Yet few emergency medicine leaders and policymakers have any formal training in CEA methodology. This paper provides an introduction to the interpretation and use of CEA with a focus on application to emergency medicine problems and settings. It applies a previously published CEA to the hypothetical case of a patient presenting to the ED with chest pain who requires risk stratification. This paper uses a widely cited checklist to appraise the CEA. This checklist serves as a vehicle for presenting basic CEA terminology and concepts. General topics of focus include measurement of costs and outcomes, incremental analysis, and sensitivity analysis. Integrated throughout the paper are recommendations for good CEA practice with emphasis on the guidelines published by the U.S. Panel on Cost-Effectiveness in Health and Medicine. Unique challenges for emergency medicine CEAs discussed include the projection of long-term outcomes from emergent interventions, costing ED services, and applying study results to diverse patient populations across various ED settings. The discussion also includes an overview of the limitations inherent in applying CEA results to clinical practice to include the lack of incorporation of noncost considerations in CEA (e.g., ethics). After reading this article, emergency medicine leaders and researchers will have an enhanced understanding of the basics of CEA critical appraisal and application. The paper concludes with an overview of economic evaluation resources for readers interested in conducting ED-based economic evaluation

  14. Low-income DSM Programs: Methodological approach to determining the cost-effectiveness of coordinated partnerships

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.; Hill, L.J.

    1994-05-01

    As governments at all levels become increasingly budget-conscious, expenditures on low-income, demand-side management (DSM) programs are being evaluated more on the basis of efficiency at the expense of equity considerations. Budgetary pressures have also caused government agencies to emphasize resource leveraging and coordination with electric and gas utilities as a means of sharing the expenses of low-income programs. The increased involvement of electric and gas utilities in coordinated low-income DSM programs, in turn, has resulted in greater emphasis on estimating program cost-effectiveness. The objective of this study is to develop a methodological approach to estimate the cost- effectiveness of coordinated low-income DSM programs, given the special features that distinguish these programs from other utility-operated DSM programs. The general approach used in this study was to (1) select six coordinated low-income DSM programs from among those currently operating across the United States, (2) examine the main features of these programs, and (3) determine the conceptual and pragmatic problems associated with estimating their cost-effectiveness. Three types of coordination between government and utility cosponsors were identified. At one extreme, local agencies operate {open_quotes}parallel{close_quotes} programs, each of which is fully funded by a single sponsor (e.g., one funded by the U.S. Department of Energy and the other by a utility). At the other extreme are highly {open_quotes}coupled{close_quotes} programs that capitalize on the unique capabilities and resources offered by each cosponsor. In these programs, agencies employ a combination of utility and government funds to deliver weatherization services as part of an integrated effort. In between are {open_quotes}supplemental{close_quotes} programs that utilize resources to supplement the agency`s government-funded weatherization, with no changes to the operation of that program.

  15. Efficacy and cost-effectiveness of environmental management for malaria control.

    Science.gov (United States)

    Utzinger, J; Tozan, Y; Singer, B H

    2001-09-01

    Roll back malaria (RBM) aims at halving the current burden of the disease by the year 2010. The focus is on sub-Saharan Africa, and it is proposed to implement efficacious and cost-effective control strategies. But the evidence base of such information is scarce, and a notable missing element is the discussion of the potential of environmental management. We reviewed the literature and identified multiple malaria control programmes that incorporated environmental management as the central feature. Prominent among them are programmes launched in 1929 and implemented for two decades at copper mining communities in Zambia. The full package of control measures consisted of vegetation clearance, modification of river boundaries, draining swamps, oil application to open water bodies and house screening. Part of the population also was given quinine and was sleeping under mosquito nets. Monthly malaria incidence rates and vector densities were used for surveillance and adaptive tuning of the environmental management strategies to achieve a high level of performance. Within 3-5 years, malaria-related mortality, morbidity and incidence rates were reduced by 70-95%. Over the entire 20 years of implementation, the programme had averted an estimated 4173 deaths and 161,205 malaria attacks. The estimated costs per death and malaria attack averted were US$ 858 and US$ 22.20, respectively. Over the initial 3-5 years start-up period, analogous to the short-duration of cost-effectiveness analyses of current studies, we estimated that the costs per disability adjusted life year (DALY) averted were US$ 524-591. However, the strategy has a track record of becoming cost-effective in the longer term, as maintenance costs were much lower: US$ 22-92 per DALY averted. In view of fewer adverse ecological effects, increased sustainability and better uses of local resources and knowledge, environmental management--integrated with pharmacological, insecticidal and bednet interventions

  16. 三峡库区小江流域水环境综合区划%Integrated Water Environment Regionalization in Xiaojiang Watershed in the Three Gorges Reservoir Area, China

    Institute of Scientific and Technical Information of China (English)

    王晶晶; 王文杰; 郎海鸥; 饶胜; 王维; 白雪

    2011-01-01

    In this study, taking Xiaojiang Watershed of the Three Gorges Reservoir Area as the research object, comprehensively considering the effects of land system, aquatic system, and socio-economic system on the water environment, an index system of integrated water environment regionalization was established, and the basic unit of division was developed under the watershed DEM. In accordance with the method of dominant factors and space overlay, combined with GIS software, integrated water environment regionalization in Xiaojiang Watershed was separated into three zones, i.e. water conservation and ecological conservation zonein the north, pollution control zone in the south, and eutrophication control zone on the mainstream area of Xiaojiang Watershed, respectively. And according to the characteristics and the main environmental problems of the region, put forward environmental protection requirements and measures. In the water conservation and ecological conservation zone, vegetation are not high, and degradation is obvious, requesting to protect existing forest, prohibite excessive deforestation, and facilitate afforestation; in the pollution control zone, forest and grass cover is low, soil erosion is very serious, and industrial pollution emission is the most important factor causing changes in water quality, needing to take pollution control as the main approach; Xiaojiang Watershed is the largest fluctuation band in Three Gorges Reservoir eutrophication control area, requiring proper resettlement, while focusing on strengthening eutrophication management. By exploring the integrated environmental management approach in Xiaojiang Watershed, we proposed zone management of water environment as a new idea, in order to improve the management of water environment in China.%本研究以三峡库区小江流域为研究对象,在综合考虑陆域、水体、社会经济对流域水环境影响的基础上,建立了水环境综合区划的指标体系,同时根据DEM划

  17. Seventeenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1992-01-31

    PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

  18. Assessment of global guidelines for preventive chemotherapy against schistosomiasis and soil-transmitted helminthiasis: a cost-effectiveness modelling study.

    Science.gov (United States)

    Lo, Nathan C; Lai, Ying-Si; Karagiannis-Voules, Dimitrios-Alexios; Bogoch, Isaac I; Coulibaly, Jean T; Bendavid, Eran; Utzinger, Jürg; Vounatsou, Penelope; Andrews, Jason R

    2016-09-01

    WHO guidelines recommend annual treatment for schistosomiasis or soil-transmitted helminthiasis when prevalence in school-aged children is at or above a threshold of 50% and 20%, respectively. Separate treatment guidelines are used for these two helminthiases, and integrated community-wide treatment is not recommended. We assessed the cost-effectiveness of changing prevalence thresholds and treatment guidelines under an integrated delivery framework. We developed a dynamic, age-structured transmission and cost-effectiveness model that simulates integrated preventive chemotherapy programmes against schistosomiasis and soil-transmitted helminthiasis. We assessed a 5-year treatment programme with praziquantel (40 mg/kg per treatment) against schistosomiasis and albendazole (400 mg per treatment) against soil-transmitted helminthiasis at 75% coverage. We defined strategies as highly cost-effective if the incremental cost-effectiveness ratio was less than the World Bank classification for a low-income country (gross domestic product of US$1045 per capita). We calculated the prevalence thresholds for cost-effective preventive chemotherapy of various strategies, and estimated treatment needs for sub-Saharan Africa. Annual preventive chemotherapy against schistosomiasis was highly cost-effective in treatment of school-aged children at a prevalence threshold of 5% (95% uncertainty interval [UI] 1·7-5·2; current guidelines recommend treatment at 50% prevalence) and for community-wide treatment at a prevalence of 15% (7·3-18·5; current recommendation is unclear, some community treatment recommended at 50% prevalence). Annual preventive chemotherapy against soil-transmitted helminthiasis was highly cost-effective in treatment of school-aged children at a prevalence of 20% (95% UI 5·4-30·5; current guidelines recommend treatment at 20% prevalence) and the entire community at 60% (35·3-85·1; no guidelines available). When both helminthiases were co-endemic, prevalence

  19. Cost-effectiveness analysis in minimally invasive spine surgery.

    Science.gov (United States)

    Al-Khouja, Lutfi T; Baron, Eli M; Johnson, J Patrick; Kim, Terrence T; Drazin, Doniel

    2014-06-01

    Medical care has been evolving with the increased influence of a value-based health care system. As a result, more emphasis is being placed on ensuring cost-effectiveness and utility in the services provided to patients. This study looks at this development in respect to minimally invasive spine surgery (MISS) costs. A literature review using PubMed, the Cost-Effectiveness Analysis (CEA) Registry, and the National Health Service Economic Evaluation Database (NHS EED) was performed. Papers were included in the study if they reported costs associated with minimally invasive spine surgery (MISS). If there was no mention of cost, CEA, cost-utility analysis (CUA), quality-adjusted life year (QALY), quality, or outcomes mentioned, then the article was excluded. Fourteen studies reporting costs associated with MISS in 12,425 patients (3675 undergoing minimally invasive procedures and 8750 undergoing open procedures) were identified through PubMed, the CEA Registry, and NHS EED. The percent cost difference between minimally invasive and open approaches ranged from 2.54% to 33.68%-all indicating cost saving with a minimally invasive surgical approach. Average length of stay (LOS) for minimally invasive surgery ranged from 0.93 days to 5.1 days compared with 1.53 days to 12 days for an open approach. All studies reporting EBL reported lower volume loss in an MISS approach (range 10-392.5 ml) than in an open approach (range 55-535.5 ml). There are currently an insufficient number of studies published reporting the costs of MISS. Of the studies published, none have followed a standardized method of reporting and analyzing cost data. Preliminary findings analyzing the 14 studies showed both cost saving and better outcomes in MISS compared with an open approach. However, more Level I CEA/CUA studies including cost/QALY evaluations with specifics of the techniques utilized need to be reported in a standardized manner to make more accurate conclusions on the cost effectiveness of

  20. Cost-Effective Icy Bodies Exploration using Small Satellite Missions

    Science.gov (United States)

    Jonsson, Jonas; Mauro, David; Stupl, Jan; Nayak, Michael; Aziz, Jonathan; Cohen, Aaron; Colaprete, Anthony; Dono-Perez, Andres; Frost, Chad; Klamm, Benjamin; hide

    2015-01-01

    It has long been known that Saturn's moon Enceladus is expelling water-rich plumes into space, providing passing spacecraft with a window into what is hidden underneath its frozen crust. Recent discoveries indicate that similar events could also occur on other bodies in the solar system, such as Jupiter's moon Europa and the dwarf planet Ceres in the asteroid belt. These plumes provide a possible giant leap forward in the search for organics and assessing habitability beyond Earth, stepping stones toward the long-term goal of finding extraterrestrial life. The United States Congress recently requested mission designs to Europa, to fit within a cost cap of $1B, much less than previous mission designs' estimates. Here, innovative cost-effective small spacecraft designs for the deep-space exploration of these icy worlds, using new and emerging enabling technologies, and how to explore the outer solar system on a budget below the cost horizon of a flagship mission, are investigated. Science requirements, instruments selection, rendezvous trajectories, and spacecraft designs are some topics detailed. The mission concepts revolve around a comparably small-sized and low-cost Plume Chaser spacecraft, instrumented to characterize the vapor constituents encountered on its trajectory. In the event that a plume is not encountered, an ejecta plume can be artificially created by a companion spacecraft, the Plume Maker, on the target body at a location timed with the passage of the Plume Chaser spacecraft. Especially in the case of Ceres, such a mission could be a great complimentary mission to Dawn, as well as a possible future Europa Clipper mission. The comparably small volume of the spacecraft enables a launch to GTO as a secondary payload, providing multiple launch opportunities per year. Plume Maker's design is nearly identical to the Plume Chaser, and fits within the constraints for a secondary payload launch. The cost-effectiveness of small spacecraft missions enables the

  1. Cost-effectiveness of Rotavirus vaccination in Vietnam

    Directory of Open Access Journals (Sweden)

    Goldie Sue J

    2009-01-01

    Full Text Available Abstract Background Rotavirus is the most common cause of severe diarrhea leading to hospitalization or disease-specific death among young children. New rotavirus vaccines have recently been approved. Some previous studies have provided broad qualitative insights into the health and economic consequences of introducing the vaccines into low-income countries, representing several features of rotavirus infection, such as varying degrees of severity and age-dependency of clinical manifestation, in their model-based analyses. We extend this work to reflect additional features of rotavirus (e.g., the possibility of reinfection and varying degrees of partial immunity conferred by natural infection, and assess the influence of the features on the cost-effectiveness of rotavirus vaccination. Methods We developed a Markov model that reflects key features of rotavirus infection, using the most recent data available. We applied the model to the 2004 Vietnamese birth cohort and re-evaluated the cost-effectiveness (2004 US dollars per disability-adjusted life year [DALY] of rotavirus vaccination (Rotarix® compared to no vaccination, from both societal and health care system perspectives. We conducted univariate sensitivity analyses and also performed a probabilistic sensitivity analysis, based on Monte Carlo simulations drawing parameter values from the distributions assigned to key uncertain parameters. Results Rotavirus vaccination would not completely protect young children against rotavirus infection due to the partial nature of vaccine immunity, but would effectively reduce severe cases of rotavirus gastroenteritis (outpatient visits, hospitalizations, or deaths by about 67% over the first 5 years of life. Under base-case assumptions (94% coverage and $5 per dose, the incremental cost per DALY averted from vaccination compared to no vaccination would be $540 from the societal perspective and $550 from the health care system perspective. Conclusion

  2. Is Stacking Intervention Components Cost-Effective? An Analysis of the Incredible Years Program

    Science.gov (United States)

    Foster, E. Michael; Olchowski, Allison E.; Webster-Stratton, Carolyn H.

    2007-01-01

    The cost-effectiveness of delivering stacked multiple intervention components for children is compared to implementing single intervention by analyzing the Incredible Years Series program. The result suggests multiple intervention components are more cost-effective than single intervention components.

  3. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for South Carolina

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in South Carolina. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in South Carolina.

  4. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Nebraska

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Nebraska. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Nebraska.

  5. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Wisconsin

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Wisconsin. Moving to the 2015 IECC from the 2006 IECC base code is cost-effective for residential buildings in all climate zones in Wisconsin.

  6. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Pennsylvania. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Pennsylvania.

  7. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Nevada. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Nevada.

  8. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Texas

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Texas. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Texas.

  9. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Oklahoma

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Oklahoma. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Oklahoma.

  10. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Missouri

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Missouri. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Missouri.

  11. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Rhode Island

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Rhode Island. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Rhode Island.

  12. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in New Mexico. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in New Mexico.

  13. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for North Dakota

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in North Dakota. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in North Dakota.

  14. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Ohio. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Ohio.

  15. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Massachusetts

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Massachusetts. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Massachusetts.

  16. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Vermont

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Vermont. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Vermont.

  17. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Mississippi

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Mississippi. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Mississippi.

  18. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Virginia. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Virginia.

  19. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Wyoming. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Wyoming.

  20. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in West Virginia. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in West Virginia.

  1. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Utah

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Utah. Moving to the 2015 IECC from the 2012 Utah State Code base code is cost-effective for residential buildings in all climate zones in Utah.

  2. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Tennessee. Moving to the 2015 IECC from the 2006 IECC base code is cost-effective for residential buildings in all climate zones in Tennessee.

  3. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for South Dakota

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in South Dakota. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in South Dakota.

  4. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Michigan. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Michigan.

  5. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Minnesota

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Minnesota. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Minnesota.

  6. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Montana

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Montana. Moving to the 2015 IECC from the 2014 Montana State Code base code is cost-effective for residential buildings in all climate zones in Montana.

  7. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for New York

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in New York. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in New York.

  8. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Alabama

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Alabama. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Alabama.

  9. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Louisiana. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Louisiana.

  10. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Delaware

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Delaware. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Delaware.

  11. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Arizona. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Arizona.

  12. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Idaho

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Idaho. Moving to the 2015 IECC from the 2015 Idaho State Code base code is cost-effective for residential buildings in all climate zones in Idaho.

  13. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Georgia. Moving to the 2015 IECC from the 2011 Georgia State Code base code is cost-effective for residential buildings in all climate zones in Georgia.

  14. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Kansas. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Kansas.

  15. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Arkansas

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Arkansas. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Arkansas.

  16. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Florida

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Florida. Moving to the 2015 IECC from the 2012 IECC base code is cost-effective for residential buildings in all climate zones in Florida.

  17. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Connecticut

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Connecticut. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Connecticut.

  18. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Colorado. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Colorado.

  19. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Hawaii. Moving to the 2015 IECC from the 2006 IECC base code is cost-effective for residential buildings in all climate zones in Hawaii.

  20. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Indiana

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V.; Zhao, Mingjie; Taylor, Zachary T.; Poehlman, Eric A.

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Indiana. Moving to the 2015 IECC from the 2009 IECC base code is cost-effective for residential buildings in all climate zones in Indiana.