WorldWideScience

Sample records for cost recovery

  1. 50 CFR 680.44 - Cost recovery.

    Science.gov (United States)

    2010-10-01

    ...) Publication—(i) General. During the first quarter of each crab fishing year, NMFS shall calculate the crab fee... Management Measures § 680.44 Cost recovery. (a) Cost recovery fees—(1) Responsibility. The person documented... holder's liability for noncompliance with this section. (2) Fee liability determination. (i) All CR...

  2. Stranded cost recovery in electricity market reforms in the US

    International Nuclear Information System (INIS)

    Woo, C.K.; Lloyd, D.; Karimov, R.; Tishler, A.

    2003-01-01

    An important element of an electricity market reform is stranded cost recovery. This paper explains the cause of stranded costs, describes four recovery mechanisms, evaluates these mechanisms using the criteria of recovery certainty, economic efficiency and equity, reviews the financial performance of 12 utilities in the US in connection to stranded cost recovery, and shows why the mechanism used in California has contributed to the reform failure in that state. (Author)

  3. Cost Recovery Through Depreciation.

    Science.gov (United States)

    Forrester, Robert T.; Wesolowski, Leonard V.

    1983-01-01

    The approach of adopting depreciation rather than use allowance in order to recover more accurately the cost of college buildings and equipment used on federal projects is considered. It is suggested that depreciation will offer most colleges and universities a higher annual recovery rate, and an opportunity for better facilities planning. For…

  4. Study on the feasibility of implementing a cost-recovery program

    International Nuclear Information System (INIS)

    1988-02-01

    The AECB does not currently have an adequate legal basis for cost recovery. The use of amendments to the AEC (Atomic Energy Control) Act or Regulations to effect cost recovery would entail too high a risk of successful legal challenge and political complications which could adversely affect the AECB's operational effectiveness. In the time frame envisaged by Treasury Board Secretariat for the AECB to collect fees, it is not practical to amend the AEC Act to make it binding on the Crown, and specifically to authorize the AECB to recover its costs. The only practical approach to providing a sound legal basis for cost recovery is through amendment of the Financial Administration Act. Studies to date have provided a basis to establish options for cost recovery which may be practical, provided that a sound legal basis is established. Studies to date have not provided a basis to evaluate the impact of any of these options on the development, application, and use of atomic energy in Canada, or on the regulatory effectiveness of the AECB. While the principle of cost-recovery has been decided by the Treasury Board, public consultations are needed to evaluate impact and to arrive at a final decision on the extent of cost recovery. Such consultations are required by the government's Regulatory Process Action Plan. Cost recovery is likely to generate a strong negative reaction from the nuclear industry, some of which may affect the ability of the AECB to implement an effective regulatory program

  5. 77 FR 7237 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2012-02-10

    ... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2006-2010 (5-year) averaging period. This represents a 0.6% decrease over the average for...

  6. 78 FR 10262 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2013-02-13

    ... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2007-2011 (5-year) averaging period. This represents a 0.1% increase over the average for...

  7. 75 FR 16575 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2010-04-01

    ...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Adoption of a railroad cost recovery procedures productivity adjustment. SUMMARY: By decision served on February 1, 2010, the Board proposed to adopt 1.010 (1.0% per year) as the 2008 productivity adjustment, as...

  8. 75 FR 5170 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2010-02-01

    ...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed Railroad Cost Recovery Procedures Productivity Adjustment. SUMMARY: In a decision served... railroad productivity for the 2004-2008 (5-year) averaging period. This is a decline of 0.5 of a percentage...

  9. 40 CFR 35.928-4 - Moratorium on industrial cost recovery payments.

    Science.gov (United States)

    2010-07-01

    ... industrial users defined in paragraphs (a) and (b) of the definition in § 35.905 pay industrial cost recovery... industrial cost recovery charges incurred for accounting periods or portions of periods ending before January... defined in paragraphs (a) and (b) of the definition in § 35.905 to pay industrial cost recovery payments...

  10. 26 CFR 1.43-4 - Qualified enhanced oil recovery costs.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Qualified enhanced oil recovery costs. 1.43-4... TAXES Credits Against Tax § 1.43-4 Qualified enhanced oil recovery costs. (a) Qualifying costs—(1) In... “qualified enhanced oil recovery costs” if the amounts are paid or incurred with respect to an asset which is...

  11. Resource-recovery facilities: Production and cost functions, and debt-financing issues

    International Nuclear Information System (INIS)

    Simonsen, W.S.

    1991-01-01

    Some of the fiscal questions relating to resource-recovery, or trash-burning, facilities are addressed. Production and cost functions for resource-recovery facilities are estimated using regression analysis. Whether or not there are returns to scale are addressed using the production and cost-function framework. Production functions are also estimated using data envelopment analysis (DEA), and results are compared to the regression results. DEA is a linear-program-based technique that can provide information about the production process. The data used to estimate the production and cost functions were collected from the Resource Recovery Yearbook. Once the decision is made to construct a resource-recovery facility, it needs to be financed. The high cost of these facilities usually prohibits financing construction out of regular operating revenues. Therefore, the issues a government faces when debt is used to finance a resource-recovery facility are analyzed. The most important public policy finding is that increasing economies of scale do not seem to be present for resource-recovery facilities

  12. Earthquake recovery of historic buildings: exploring cost and time needs.

    Science.gov (United States)

    Al-Nammari, Fatima M; Lindell, Michael K

    2009-07-01

    Disaster recovery of historic buildings has rarely been investigated even though the available literature indicates that they face special challenges. This study examines buildings' recovery time and cost to determine whether their functions (that is, their use) and their status (historic or non-historic) affect these outcomes. The study uses data from the city of San Francisco after the 1989 Loma Prieta earthquake to examine the recovery of historic buildings owned by public agencies and non-governmental organisations. The results show that recovery cost is affected by damage level, construction type and historic status, whereas recovery time is affected by the same variables and also by building function. The study points to the importance of pre-incident recovery planning, especially for building functions that have shown delayed recovery. Also, the study calls attention to the importance of further investigations into the challenges facing historic building recovery.

  13. Universal access, cost recovery, and payment services

    OpenAIRE

    Sujit Chakravorti; Jeffery W. Gunther; Robert R. Moore

    2005-01-01

    We suggest a subtle, yet far- reaching, tension in the objectives specified by the Monetary Control Act of 1980 (MCA) for the Federal Reserve’s role in providing retail payment services, such as check processing. Specifically, we argue that the requirement of an overall cost-revenue match, coupled with the goal of ensuring equitable access on a universal basis, partially shifted the burden of cost recovery from high-cost to low-cost service points during the MCA’s early years, thereby allowin...

  14. Cost analysis and ecological benefits of environmental recovery methodologies in bauxite mining

    OpenAIRE

    Guimarães,João Carlos Costa; Barros,Dalmo Arantes de; Pereira,José Aldo Alves; Silva,Rossi Allan; Oliveira,Antonio Donizette de; Borges,Luís Antônio Coimbra

    2013-01-01

    This work analyzed and compared three methods of environmental recovery in bauxite mining commonly used in Poços de Caldas Plateau, MG, by means of recovery costs and ecological benefits. Earnings and costs data of environmental recovery activities were obtained for the areas that belonged to the Companhia Geral de Minas – CGM, on properties sited in the city of Poços de Caldas, MG. The amount of costs of these activities was used to compare the recovery methods by updating them monetarily to...

  15. The Societal Benefits and Costs of School Dropout Recovery

    Directory of Open Access Journals (Sweden)

    James S. Catterall

    2011-01-01

    Full Text Available This article reports an analysis of the societal benefits and costs of recovering school dropouts. Successful recovery is defined by subsequent graduation from high school. The analysis is based on established estimates of the societal costs of dropping out including reduced government tax collections and higher social costs of welfare, healthcare, and crime. These potential costs are cast as benefits when a dropout is recovered. A large dropout recovery program provides the setting for the analysis. Rigorous attention is given to accurate estimation of the number of students who would not have graduated without the program in the year assessed and to the induced public costs of their continued education. Estimated benefits are weighed against the total annual public costs of the program, which operates in 65 school centers and commands an annual budget of about $70 million. The estimated benefit-cost ratio for this program is 3 to 1, a figure comparable to benefit-cost ratio estimates reported in studies of dropout prevention. The sensitivity of this conclusion to specific assumptions within the analysis is discussed.

  16. 40 CFR 35.928-3 - Implementation of the industrial cost recovery system.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Implementation of the industrial cost...-Clean Water Act § 35.928-3 Implementation of the industrial cost recovery system. (a) When a grantee's industrial cost recovery system is approved, implementation of the approved system shall become a condition...

  17. AECB Cost Recovery Fees Regulations, amendment

    International Nuclear Information System (INIS)

    1992-01-01

    The amendments to the AECB Cost Recovery Fees Regulations have been made with a view to simplifying the registration procedure for obtaining such a certificate or approval under the above Transport Regulations. In effect there will no longer be a need for a separate fee system for registered users of certified package designs. (NEA)

  18. Medical Care Cost Recovery National Database (MCCR NDB)

    Data.gov (United States)

    Department of Veterans Affairs — The Medical Care Cost Recovery National Database (MCCR NDB) provides a repository of summary Medical Care Collections Fund (MCCF) billing and collection information...

  19. AECB Cost Recovery Fees Regulations, amendment

    International Nuclear Information System (INIS)

    1991-01-01

    The amendment to the Regulations was published on 24 October 1991 (SOR/91-590,Canada Gazette Part II, Vol.125, No 23). It modifies the list of institutions exempted from paying cost recovery fees (licence fees) to the Atomic Energy Control Board. The exemptions now include educational and health care institutions as well as Departments. (NEA)

  20. Cost recovery of NGO primary health care facilities: a case study in Bangladesh

    Directory of Open Access Journals (Sweden)

    Alam Khurshid

    2010-06-01

    Full Text Available Abstract Background Little is known about the cost recovery of primary health care facilities in Bangladesh. This study estimated the cost recovery of a primary health care facility run by Building Resources Across Community (BRAC, a large NGO in Bangladesh, for the period of July 2004 - June 2005. This health facility is one of the seven upgraded BRAC facilities providing emergency obstetric care and is typical of the government and private primary health care facilities in Bangladesh. Given the current maternal and child mortality in Bangladesh and the challenges to addressing health-related Millennium Development Goal (MDG targets the financial sustainability of such facilities is crucial. Methods The study was designed as a case study covering a single facility. The methodology was based on the 'ingredient approach' using the allocation techniques by inpatient and outpatient services. Cost recovery of the facility was estimated from the provider's perspective. The value of capital items was annualized using 5% discount rate and its market price of 2004 (replacement value. Sensitivity analysis was done using 3% discount rate. Results The cost recovery ratio of the BRAC primary care facility was 59%, and if excluding all capital costs, it increased to 72%. Of the total costs, 32% was for personnel while drugs absorbed 18%. Capital items were17% of total costs while operational cost absorbed 12%. Three-quarters of the total cost was variable costs. Inpatient services contributed 74% of total revenue in exchange of 10% of total utilization. An average cost per patient was US$ 10 while it was US$ 67 for inpatient and US$ 4 for outpatient. Conclusion The cost recovery of this NGO primary care facility is important for increasing its financial sustainability and decreasing donor dependency, and achieving universal health coverage in a developing country setting. However, for improving the cost recovery of the health facility, it needs to increase

  1. 75 FR 49508 - Recovery Policy, RP9525.7, Labor Costs-Emergency Work

    Science.gov (United States)

    2010-08-13

    ...] Recovery Policy, RP9525.7, Labor Costs--Emergency Work AGENCY: Federal Emergency Management Agency, DHS... (FEMA) is accepting comments on RP9525.7, Labor Costs--Emergency Work. This is an existing policy that is scheduled for review to ensure that Recovery Directorate policies are up to date, incorporate...

  2. Cost analysis and ecological benefits of environmental recovery methodologies in bauxite mining

    Directory of Open Access Journals (Sweden)

    João Carlos Costa Guimarães

    2013-03-01

    Full Text Available This work analyzed and compared three methods of environmental recovery in bauxite mining commonly used in Poços de Caldas Plateau, MG, by means of recovery costs and ecological benefits. Earnings and costs data of environmental recovery activities were obtained for the areas that belonged to the Companhia Geral de Minas – CGM, on properties sited in the city of Poços de Caldas, MG. The amount of costs of these activities was used to compare the recovery methods by updating them monetarily to a reference date, in other words, the present moment. It is concluded that the difference between the present value of costs for simple restoration and rehabilitation activities are less than 1% and that between the complete restoration and rehabilitation is about 15.12%, suggesting that the choice of the methods to be used must be based on the ecological earnings proportional to each of them. The methodology of environmental restoration of the mining areas emphasizes the ecological variables in the process of establishment of the community, to the detriment of complex ecological aspects, which show difficulties in measuring the actual moment of the development of the ecosystem considered.

  3. The effect of short recovery period investment on least-cost generation system expansion

    International Nuclear Information System (INIS)

    Yiqun He; David, A.K.; Fernando, P.N.

    1995-01-01

    The effect of the short recovery period of private investment on least-cost generation system expansion is analysed, and a trade-off method for generation system expansion, which gives consideration to both the least-cost strategy and the short recovery period of private investment, is presented. First, the optimal mix of generation units under a standard recovery period for all units is established, and then the surcharge, due to the difference between the short recovery period and the standard recovery period, is calculated and shared between all units. The former is an optimization to make best use of natural resources, and the latter is a trade-off method to spread the surcharge throughout the system. (Author)

  4. Waste Processing Cost Recovery at Los Alamos National Laboratory-Analysis and Recommendations

    International Nuclear Information System (INIS)

    Booth, St. R.

    2009-01-01

    Los Alamos National Laboratory is implementing full cost recovery for waste processing in fiscal year 2009 (FY2009), after a transition year in FY2008. Waste processing cost recovery has been implemented in various forms across the nuclear weapons complex and in corporate America. The fundamental reasoning of sending accurate price signals to waste generators is economically sound, and leads to waste minimization and reduced waste expense over time. However, Los Alamos faces significant implementation challenges because of its status as a government-owned, contractor-operated national scientific institution with a diverse suite of experimental and environmental cleanup activities, and the fact that this represents a fundamental change in how waste processing is viewed by the institution. This paper describes the issues involved during the transition to cost recovery and the ultimate selection of the business model. Of the six alternative cost recovery models evaluated, the business model chosen to be implemented in FY2009 is Recharge Plus Generators Pay Distributed Direct. Under this model, all generators who produce waste must pay a distributed direct share associated with their specific waste type to use a waste processing capability. This cost share is calculated using the distributed direct method on the fixed cost only, i.e., the fixed cost share is based on each program's forecast proportion of the total Los Alamos volume forecast of each waste type. (Fixed activities are those required to establish the waste processing capability, i.e., to make the process ready, permitted, certified, and prepared to handle the first unit of waste. Therefore, the fixed cost ends at the point just before waste begins to be processed. The activities to actually process the waste are considered variable.) The volume of waste actually sent for processing is charged a unit cost based solely on the variable cost of disposing of that waste. The total cost recovered each year is the

  5. Cost Effective Recovery of Low-TDS Frac Flowback Water for Re-use

    Energy Technology Data Exchange (ETDEWEB)

    Claire Henderson; Harish Acharya; Hope Matis; Hareesh Kommepalli; Brian Moore; Hua Wang

    2011-03-31

    The project goal was to develop a cost-effective water recovery process to reduce the costs and envi-ronmental impact of shale gas production. This effort sought to develop both a flowback water pre-treatment process and a membrane-based partial demineralization process for the treatment of the low-Total Dissolved Solids (TDS) portion of the flowback water produced during hydrofracturing operations. The TDS cutoff for consideration in this project is < 35,000 {approx} 45,000 ppm, which is the typical limit for economic water recovery employing reverse osmosis (RO) type membrane desalination processes. The ultimate objective is the production of clean, reclaimed water suitable for re-use in hydrofracturing operations. The team successfully compiled data on flowback composition and other attributes across multiple shale plays, identified the likely applicability of membrane treatment processes in those shales, and expanded the proposed product portfolio to include four options suitable for various reuse or discharge applications. Pretreatment technologies were evaluated at the lab scale and down-selected based upon their efficacy in removing key contaminants. The chosen technologies were further validated by performing membrane fouling studies with treated flowback water to demonstrate the technical feasibility of flowback treatment with RO membranes. Process flow schemes were constructed for each of the four product options based on experimental performance data from actual flowback water treatment studies. For the products requiring membrane treatment, membrane system model-ing software was used to create designs for enhanced water recovery beyond the typical seawater desalination benchmark. System costs based upon vendor and internal cost information for all process flow schemes were generated and are below target and in line with customer expectations. Finally, to account for temporal and geographic variability in flowback characteristics as well as local

  6. The long-term power purchase: Recovery of capacity costs

    International Nuclear Information System (INIS)

    Cross, P.S.

    1990-01-01

    As electric utilities increase their reliance on the long-term power purchase as an alternative to utility-owned generation, the appropriate rate treatment of the costs established in the purchase agreement assumes growing importance. In the November 9, 1989, issue, the authors examined the recent trend among state regulators to treat the long-term purchase in a manner similar to the addition by a utility of a new plant, including a full-scale prudence review. This installment will review recent rulings on the related issue of rate recovery of long-term capacity costs through the fuel cost adjustment clause

  7. 18 CFR 284.265 - Cost recovery by interstate pipeline.

    Science.gov (United States)

    2010-04-01

    ... 1978 AND RELATED AUTHORITIES Emergency Natural Gas Sale, Transportation, and Exchange Transactions... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Cost recovery by interstate pipeline. 284.265 Section 284.265 Conservation of Power and Water Resources FEDERAL ENERGY...

  8. Cost Scaling of a Real-World Exhaust Waste Heat Recovery Thermoelectric Generator: A Deeper Dive

    Science.gov (United States)

    Hendricks, Terry J.; Yee, Shannon; LeBlanc, Saniya

    2015-01-01

    Cost is equally important to power density or efficiency for the adoption of waste heat recovery thermoelectric generators (TEG) in many transportation and industrial energy recovery applications. In many cases the system design that minimizes cost (e.g., the $/W value) can be very different than the design that maximizes the system's efficiency or power density, and it is important to understand the relationship between those designs to optimize TEG performance-cost compromises. Expanding on recent cost analysis work and using more detailed system modeling, an enhanced cost scaling analysis of a waste heat recovery thermoelectric generator with more detailed, coupled treatment of the heat exchangers has been performed. In this analysis, the effect of the heat lost to the environment and updated relationships between the hot-side and cold-side conductances that maximize power output are considered. This coupled thermal and thermoelectric treatment of the exhaust waste heat recovery thermoelectric generator yields modified cost scaling and design optimization equations, which are now strongly dependent on the heat leakage fraction, exhaust mass flow rate, and heat exchanger effectiveness. This work shows that heat exchanger costs most often dominate the overall TE system costs, that it is extremely difficult to escape this regime, and in order to achieve TE system costs of $1/W it is necessary to achieve heat exchanger costs of $1/(W/K). Minimum TE system costs per watt generally coincide with maximum power points, but Preferred TE Design Regimes are identified where there is little cost penalty for moving into regions of higher efficiency and slightly lower power outputs. These regimes are closely tied to previously-identified low cost design regimes. This work shows that the optimum fill factor Fopt minimizing system costs decreases as heat losses increase, and increases as exhaust mass flow rate and heat exchanger effectiveness increase. These findings have

  9. Claus sulphur recovery potential approaches 99% while minimizing cost

    Energy Technology Data Exchange (ETDEWEB)

    Berlie, E M

    1974-01-21

    In a summary of a paper presented to the fourth joint engineering conference of the American Institute of Chemical Engineers and the Canadian Society for Chemical Engineering, the Claus process is discussed in a modern setting. Some problems faced in the operation of sulfur recovery plants include (1) strict pollution control regulations; (2) design and operation of existing plants; (3) knowledge of process fundamentals; (4) performance testing; (5) specification of feed gas; (6) catalyst life; (7) instrumentation and process control; and (8) quality of feed gas. Some of the factors which must be considered in order to achieve the ultimate capability of the Claus process are listed. There is strong evidence to support the contention that plant operators are reluctant to accept new fundamental knowledge of the Claus sulfur recovery process and are not taking advantage of its inherent potential to achieve the emission standards required, to minimize cost of tail gas cleanup systems and to minimize operating costs.

  10. Cost recovery of NGO primary health care facilities: a case study in Bangladesh

    OpenAIRE

    Alam, Khurshid; Ahmed, Shakil

    2010-01-01

    Abstract Background Little is known about the cost recovery of primary health care facilities in Bangladesh. This study estimated the cost recovery of a primary health care facility run by Building Resources Across Community (BRAC), a large NGO in Bangladesh, for the period of July 2004 - June 2005. This health facility is one of the seven upgraded BRAC facilities providing emergency obstetric care and is typical of the government and private primary health care facilities in Bangladesh. Give...

  11. Cost analysis of enhanced recovery after surgery in microvascular breast reconstruction.

    Science.gov (United States)

    Oh, Christine; Moriarty, James; Borah, Bijan J; Mara, Kristin C; Harmsen, William S; Saint-Cyr, Michel; Lemaine, Valerie

    2018-06-01

    Enhanced recovery after surgery (ERAS) pathways have been shown in multiple surgical specialties to decrease hospital length of stay (LOS) after surgery. ERAS in breast reconstruction has been found to decrease hospital LOS and inpatient opioid use. ERAS protocols can facilitate a patient's recovery and can potentially increase the quality of care while decreasing costs. A standardized ERAS pathway was developed through multidisciplinary collaboration. It addressed all phases of surgical care for patients undergoing free-flap breast reconstruction utilizing an abdominal donor site. In this retrospective cohort study, clinical variables associated with hospitalization costs for patients who underwent free-flap breast reconstruction with the ERAS pathway were compared with those of historical controls, termed traditional recovery after surgery (TRAS). All patients included in the study underwent surgery between September 2010 and September 2014. Predicted costs of the study groups were compared using generalized linear modeling. A total of 200 patients were analyzed: 82 in the ERAS cohort and 118 in the TRAS cohort. Clinical variables that were identified to potentially affect costs were found to have a statistically significant difference between groups and included unilateral versus bilateral procedures (p = 0.04) and the need for postoperative blood transfusion (p = 0.03). The cost regression analysis on the two cohorts was adjusted for these significant variables. Adjusted mean costs of patients with ERAS were found to be $4,576 lesser than those of the TRAS control group ($38,688 versus $43,264). Implementation of the ERAS pathway was associated with significantly decreased costs when compared to historical controls. There has been a healthcare focus toward prudent resource allocation, which dictates the need for plastic surgeons to recognize economic evaluation of clinical practice. The ERAS pathway can increase healthcare accountability by improving

  12. Cost-effectiveness of enhanced recovery in hip and knee replacement: a systematic review protocol.

    Science.gov (United States)

    Murphy, Jacqueline; Pritchard, Mark G; Cheng, Lok Yin; Janarthanan, Roshni; Leal, José

    2018-03-14

    Hip and knee replacement represents a significant burden to the UK healthcare system. 'Enhanced recovery' pathways have been introduced in the National Health Service (NHS) for patients undergoing hip and knee replacement, with the aim of improving outcomes and timely recovery after surgery. To support policymaking, there is a need to evaluate the cost-effectiveness of enhanced recovery pathways across jurisdictions. Our aim is to systematically summarise the published cost-effectiveness evidence on enhanced recovery in hip and knee replacement, both as a whole and for each of the various components of enhanced recovery pathways. A systematic review will be conducted using MEDLINE, EMBASE, Econlit and the National Health Service Economic Evaluations Database. Separate search strategies were developed for each database including terms relating to hip and knee replacement/arthroplasty, economic evaluations, decision modelling and quality of life measures.We will extract peer-reviewed studies published between 2000 and 2017 reporting economic evaluations of preoperative, perioperative or postoperative enhanced recovery interventions within hip or knee replacement. Economic evaluations alongside cohort studies or based on decision models will be included. Only studies with patients undergoing elective replacement surgery of the hip or knee will be included. Data will be extracted using a predefined pro forma following best practice guidelines for economic evaluation, decision modelling and model validation.Our primary outcome will be the cost-effectiveness of enhanced recovery (entire pathway and individual components) in terms of incremental cost per quality-adjusted life year. A narrative synthesis of all studies will be presented, focussing on cost-effectiveness results, study design, quality and validation status. This systematic review is exempted from ethics approval because the work is carried out on published documents. The results of the review will be

  13. 43 CFR 426.23 - Recovery of operation and maintenance (O&M) costs.

    Science.gov (United States)

    2010-10-01

    ... operation and maintenance (O&M) costs. (a) General. All new, amended, and renewed contracts shall provide... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Recovery of operation and maintenance (O&M) costs. 426.23 Section 426.23 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF...

  14. Cost-effective treatment of swine wastes through recovery of energy and nutrients.

    Science.gov (United States)

    Amini, Adib; Aponte-Morales, Veronica; Wang, Meng; Dilbeck, Merrill; Lahav, Ori; Zhang, Qiong; Cunningham, Jeffrey A; Ergas, Sarina J

    2017-11-01

    Wastes from concentrated animal feeding operations (CAFOs) are challenging to treat because they are high in organic matter and nutrients. Conventional swine waste treatment options in the U.S., such as uncovered anaerobic lagoons, result in poor effluent quality and greenhouse gas emissions, and implementation of advanced treatment introduces high costs. Therefore, the purpose of this paper is to evaluate the performance and life cycle costs of an alternative system for treating swine CAFO waste, which recovers valuable energy (as biogas) and nutrients (N, P, K + ) as saleable fertilizers. The system uses in-vessel anaerobic digestion (AD) for methane production and solids stabilization, followed by struvite precipitation and ion exchange (IX) onto natural zeolites (chabazite or clinoptilolite) for nutrient recovery. An alternative approach that integrated struvite recovery and IX into a single reactor, termed STRIEX, was also investigated. Pilot- and bench-scale reactor experiments were used to evaluate the performance of each stage in the treatment train. Data from these studies were integrated into a life cycle cost analysis (LCCA) to assess the cost-effectiveness of various process alternatives. Significant improvement in water quality, high methane production, and high nutrient recovery (generally over 90%) were observed with both the AD-struvite-IX process and the AD-STRIEX process. The LCCA showed that the STRIEX system can provide considerable financial savings compared to conventional systems. AD, however, incurs high capital costs compared to conventional anaerobic lagoons and may require larger scales to become financially attractive. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. An Insight Into Budgeting, The Funding And Cost Recovery of ...

    African Journals Online (AJOL)

    The study further revealed that Institutions' financial support for students was woefully inadequate. Students' fee payment was also identified as the main modality for cost recovery of tertiary education. It was recommended that communities and industries should be made to make meaningful contributions towards tertiary ...

  16. 76 FR 54223 - Notice of Proposed Administrative Cost Recovery Settlement Pursuant to the Comprehensive...

    Science.gov (United States)

    2011-08-31

    ... Costs Incurred at Marine Corps Logistics Base Barstow, CA AGENCY: Department of the Navy, DoD. ACTION... of response costs incurred by the DON at the Site. The proposed Administrative Settlement resolves... DEPARTMENT OF DEFENSE Department of the Navy Notice of Proposed Administrative Cost Recovery...

  17. A Stochastic Market Design With Revenue Adequacy and Cost Recovery by Scenario: Benefits and Costs

    DEFF Research Database (Denmark)

    Kazempour, Jalal; Pinson, Pierre; Hobbs, Benjamin F.

    2018-01-01

    Two desirable properties of electricity market mechanisms include: i) revenue adequacy for the market, and ii) cost recovery for all generators. Previously proposed stochastic market-clearing mechanisms satisfy both properties in expectation only, or satisfy one property by scenario and another...... scheme that ensures both properties by scenario. However, this approach is cost-inefficient in general and may sacrifice other desirable market attributes. Undesirable consequences include: one group of participants will have to pay more to ensure that all other participants have their costs covered......, and thus their prices will not be equilibrium supporting; and day-ahead and real-time prices are not arbitraged in expectation, although this can be fixed by allowing virtual bidders to arbitrage but at the potential cost of increased market inefficiency. Considering these pros and cons, we propose our...

  18. SOR/93-163 AECB Cost Recovery Fees Regulations, 1993

    International Nuclear Information System (INIS)

    1993-01-01

    The Atomic Energy Control Board (Cost Recovery Fees Regulations 1990 and subsequent amendments have been revoked and replaced by those new Regulations of 30 march 1993 which entered into force on 1 April 1993. The regulations were first made in 1990 in order to carry out the Government's policy of introducing the principle of ''user pay'' for the cost incurred by the AECB in its regulatory activities. The objective of the policy was to shift the cost of Government regulatory efforts for the taxpayer at large to those who most benefited from or whose activities were the reason for such effort. This new version of the Regulations reflects licensees' comments, e.g. extension of the period for review of proposed fees, and sets out increases in the fees. (NEA)

  19. Cost analysis, cost recovery, marketing and fee-based services a guide for the health sciences librarian

    CERN Document Server

    Wood, M Sandra

    2013-01-01

    This outstanding volume won the 1986 Ida and George Eliot Prize--awarded by the Medical Library Association for the work judged most effective in furthering medical librarianship. Library professionals review the controversy behind fee-for-service programs and provide a rationale for incorporating them into contemporary library philosophies of service. Some fee-based services are necessary for survival in a society that treats information as a marketable commodity; this comprehensive book gives practical advice on cost analysis, cost recovery and marketing of reference services, and presents i

  20. Influencing Factor of Postoperation Fast-track Recovery and in Hospital Cost after Lobctomy for Lung Cancer

    Directory of Open Access Journals (Sweden)

    Jianhua SU

    2014-07-01

    Full Text Available Background and objective It is unknown that the postoperation fast-track recovery and in hospital cost of the lobectomy in lung cancer, we explored the influencing factor of postoperative fast-track recovery and in hospital cost after undergoing lobectomy for lung cancer. Methods We retrospectively reviewed the medical records of all patients (n=176 who underwent lobectomy for lung cancer between January 2010 and November 2011 by a thoracic surgeon. Results The hospital costs of video-assisted thoracic surgery (VATS lobectomy (47,308.21 ¥ is significantly higher than open lobectomy (45,664.31 ¥(P=0.007. The hospital costs of body mass index (BMI ≥ 24 kg/m2 (51,186.99 ¥ is significantly higher than BMI < 24 kg/m2 (41,701.64 ¥(P=0.032. The hospital stay of VATS lobectomy (5.70 d is significantly less than open lobectomy (7.10 d(P<0.001. Conclusion These findings indicate that preoperative pulmonary rehabilitation and VATS lobectomy is contributed to fast-track recovery for patients who undergo lobectomy, but increase the hospital costs.

  1. Costs, CO{sub 2}- and primary energy balances of forest-fuel recovery systems at different forest productivity

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Lisa; Gustavsson, Leif [Ecotechnology, Department of Engineering and Sustainable Development, Mid Sweden University, SE-831 25 Oestersund (Sweden)

    2010-05-15

    Here we examine the cost, primary energy use, and net carbon emissions associated with removal and use of forest residues for energy, considering different recovery systems, terrain, forwarding distance and forest productivity. We show the potential recovery of forest fuel for Sweden, its costs and net carbon emissions from primary energy use and avoided fossil carbon emissions. The potential annual net recovery of forest fuel is about 66 TWh, which would cost one billion EUR{sub 2005} to recover and would reduce fossil emissions by 6.9 Mt carbon if coal were replaced. Of the forest fuel, 56% is situated in normal terrain with productivity of >30 t dry-matter ha{sup -1} and of this, 65% has a forwarding distance of <400 m. In normal terrain with >30 t dry-matter ha{sup -1} the cost increase for the recovery of forest fuel, excluding stumps, is around 4-6% and 8-11% for medium and longer forwarding distances, respectively. The stump and small roundwood systems are less cost-effective at lower forest fuel intensity per area. For systems where loose material is forwarded, less dry-matter per hectare increases costs by 6-7%, while a difficult terrain increases costs by 3-4%. Still, these systems are quite cost-effective. The cost of spreading ash is around 40 EUR{sub 2005} ha{sup -1}, while primary energy use for spreading ash in areas where logging residues, stumps, and small roundwood are recovered is about 0.025% of the recovered bioenergy. (author)

  2. 77 FR 58989 - Proposed CERCLA Administrative Cost Recovery Settlement for the Buckbee-Mears Co. Superfund Site...

    Science.gov (United States)

    2012-09-25

    ... paid $150,000 attributable to the costs of marketing and selling the Properties; (b) The Bank will pay... ENVIRONMENTAL PROTECTION AGENCY [FRL-9720-7] Proposed CERCLA Administrative Cost Recovery... costs concerning the Buckbee-Mears Co. Superfund Site located in Cortland, Cortland County, New York...

  3. A conceptional design, cost and sensitivity analysis on adsorption process for uranium recovery from seawater

    International Nuclear Information System (INIS)

    Ogata, Noboru

    1986-01-01

    The system model for a conceptional design and cost estimation was studied on a multi-layered fluidizing bed with a pump which used hydrous titanium oxide (HTO) and amidoxime resin (AOR) as adsorbents. The cost effect of some parameters, namely characteristics of adsorbent, operating conditions, price of materials and some others, were estimated, and finally there was shown a direction of improvement and a possibility of cost reduction. The conceptional design and operating condition were obtained from the balance point on expansion ratio, recovery and characteristics of adsorbent. A suitable plan was obtained from the minimum cost condition in some level of the expansion ratio and some parameters. HTO was heavy in density and cheap in price. The main results of the study indicated that the thickness of the bed was 1 m, the linear velocity of seawater was 52 m/hr, the number of bed layers was 4, the construction cost of a 100 t/y plant was 10 billion yen, and the uranium cost was 160 $/1b. AOR had a large adsorption capacity. As the main results, the thickness of bed was 0.08 m, the linear velosity of seawater was 11.6 m, the number of the bed layers was 27, the construction cost of a 100 t/y plant was 15 billion yen, and the uranium cost was 280 $/1b. The size of the 100 t/y plant was about 800 m length x 80 m depth x 30 m height at 80 % of recovery. An increase of adsorption capacity in HTO, and an increase of density and particle size in AOR had the greatest merit for cost reduction. Other effective parameters were the adsorption velocity, the recovery, temperature, the price of adsorbent, the manufacturing cost of instrument, and the rate of interest. The cost of uranium by this process had a possibility of cost reduction to 67 $/1b at HTO and 79 $/1b at AOR. (author)

  4. The impact of consumer awareness of water sector issues on willingness to pay and cost recovery in Zambia

    Science.gov (United States)

    Ntengwe, F. W.

    The recovery of costs in water utilities is a key element in sustainability of both the provider and of the water resource itself. This paper examines the role played by consumer awareness in their willingness to pay for water supply in two cities in Zambia. Research conducted in Kitwe and Lusaka reveals that level of awareness, willingness to pay and cost recovery all vary directly. Whereas awareness may increase consumers’ willingness to pay, therefore assisting service provider’s cost recovery, the research presented here also reveals that factors such as ability to pay, affordability of bills, quality of water and of the service provided, as well as good business-consumer relations are important factors affecting a utility’s ability to recover its costs. If water utilities are to attain sustainability over the long-term, they will have to embark on and maintain consumer awareness programmes, raise the quality of service (e.g., through improved operation and maintenance), and develop and apply the right water tariff.

  5. Transaction Costs in Collective Waste Recovery Systems in the EU

    OpenAIRE

    Nozharov, Shteryo

    2018-01-01

    The study aims to identify the institutional flaws of the current EU waste management model by analysing the economic model of extended producer responsibility and collective waste management systems and to create a model for measuring the transaction costs borne by waste recovery organizations. The model was approbated by analysing the Bulgarian collective waste management systems that have been complying with the EU legislation for the last 10 years. The analysis focuses on waste oils becau...

  6. Cost Recovery in Urban Water Services : Select Experiences in Indian Cities

    OpenAIRE

    Gupta, Anjali Sen

    2011-01-01

    The report draws on a Water and Sanitation Program (WSP) study from 2008 which made a comparative analysis of 23 Urban Local Bodies (ULBs)-looking at seven cities in detail and another 16 based on secondary data-to understand the factors affecting cost recovery in India and provide an indication of current performance. It also draws out examples and lessons to inform reform approaches and ...

  7. Decommissioning cost recovery in the United States: lessons learned from Connecticut Yankee NPP

    International Nuclear Information System (INIS)

    Joosten, J.

    1999-01-01

    The international audience at ICONE-7 is already familiar with the roles of the owner and the NRC in ensuring the technical and safety performance goals of nuclear plant decommissioning. This paper addresses the role of the economic regulator since the pursuit of technical and safety goals must necessarily carry with them -a price tag- and owners must be concerned with the recovery of those costs. Answers to questions about how to pay and who should pay for decommissioning can very often influence nuclear power plant owner's decision-making. In the United States, most nuclear power plants are privately owned. Nevertheless, their owners are not totally free to determine the plant's economics or profitability. Instead, plant owners must sell their electricity to consumers in a regulated market wherein the price of electricity and terms of sale are controlled by the government. Under this regulatory regime, utilities are generally allowed to recover their investment costs -including decommissioning costs- provided that such costs are prudently, incurred. However, when an owner retires the plant prematurely, the prudence of his actions -up to and including the shutdown- are likely to be challenged. In 1997, for example, the owners of the Connecticut Yankee reactor faced a stiff challenge to the recovery of decommissioning costs when they shut down the plant ten years before license expiration. The Connecticut Yankee case thus provides valuable insights into the role of economic regulation on a nuclear plant's decommissioning strategy. (author)

  8. Promoting mental health recovery after hurricanes Katrina and Rita: what can be done at what cost.

    Science.gov (United States)

    Schoenbaum, Michael; Butler, Brittany; Kataoka, Sheryl; Norquist, Grayson; Springgate, Benjamin; Sullivan, Greer; Duan, Naihua; Kessler, Ronald C; Wells, Kenneth

    2009-08-01

    Concerns about mental health recovery persist after the 2005 Gulf storms. We propose a recovery model and estimate costs and outcomes. To estimate the costs and outcomes of enhanced mental health response to large-scale disasters using the 2005 Gulf storms as a case study. Decision analysis using state-transition Markov models for 6-month periods from 7 to 30 months after disasters. Simulated movements between health states were based on probabilities drawn from the clinical literature and expert input. A total of 117 counties/parishes across Louisiana, Mississippi, Alabama, and Texas that the Federal Emergency Management Agency designated as eligible for individual relief following hurricanes Katrina and Rita. Hypothetical cohort, based on the size and characteristics of the population affected by the Gulf storms. Intervention Enhanced mental health care consisting of evidence-based screening, assessment, treatment, and care coordination. Morbidity in 6-month episodes of mild/moderate or severe mental health problems through 30 months after the disasters; units of service (eg, office visits, prescriptions, hospital nights); intervention costs; and use of human resources. Full implementation would cost $1133 per capita, or more than $12.5 billion for the affected population, and yield 94.8% to 96.1% recovered by 30 months, but exceed available provider capacity. Partial implementation would lower costs and recovery proportionately. Evidence-based mental health response is feasible, but requires targeted resources, increased provider capacity, and advanced planning.

  9. The impact of cost recovery on electric utilities' Clean Air Act compliance strategies

    International Nuclear Information System (INIS)

    Bensinger, D.L.

    1993-01-01

    By 1995, over 200 electric power plant units in twenty one states must comply with Phase I of the acid rain requirements in Title IV of the 1990 Clean Air Act Amendments (CAAA). By the year 2000, an additional 2200 units must comply with the Title IV. Compliance costs are expected to necessitate significant electricity rate increases. In order to recover their compliance costs, utilities must file rate increase requests with state public utility commissions (PUC's), and undergo a rate proceeding involving public heatings. Because of the magnitude of cost and the complexity of compliance options, including interaction with Titles I and III of the CAAA, extensive PUC reviews of compliance strategies are likely. These reviews could become as adversarial as the nuclear prudence reviews of the 1980's. A lack of understanding of air pollution and the CAA by much of the general public and the flexibility of compliance options creates an environment conducive to adverse public reaction to the cost of complying with the Clean Air Act. Public attitudes toward pollution control technologies will be greatly affected by these hearings, and the early plant hearings will shape the utility rate making process under the Clean Air Act. Inadequate cost recovery due to constrained compliance strategies or adverse hearings could significantly inhibit industry willingness to invest in certain control technologies or advanced combustion technologies. There are already signs that Clean Air Act compliance will be the prudence issue of the 1990's for utilities, even where state statutes mandate particular compliance approaches. Specific actions should be undertaken now by the utility industry to improve the probability of sound cost recovery decisions, preserve compliance options, including multimedia strategies, and avoid the social- and cost-acceptance problems of nuclear power

  10. Cost-Benefit Analysis of the Implementation of an Enhanced Recovery Program in Liver Surgery.

    Science.gov (United States)

    Joliat, Gaëtan-Romain; Labgaa, Ismaïl; Hübner, Martin; Blanc, Catherine; Griesser, Anne-Claude; Schäfer, Markus; Demartines, Nicolas

    2016-10-01

    Enhanced recovery after surgery (ERAS) programs have been shown to ease the postoperative recovery and improve clinical outcomes for various surgery types. ERAS cost-effectiveness was demonstrated for colorectal surgery but not for liver surgery. The present study aim was to analyze the implementation costs and benefits of a specific ERAS program in liver surgery. A dedicated ERAS protocol for liver surgery was implemented in our department in July 2013. The subsequent year all consecutive patients undergoing liver surgery were treated according to this protocol (ERAS group). They were compared in terms of real in-hospital costs with a patient series before ERAS implementation (pre-ERAS group). Mean costs per patient were compared with a bootstrap T test. A cost-minimization analysis was performed. Seventy-four ERAS patients were compared with 100 pre-ERAS patients. There were no significant pre- and intraoperative differences between the two groups, except for the laparoscopy number (n = 18 ERAS, n = 9 pre-ERAS, p = 0.010). Overall postoperative complications were observed in 36 (49 %) and 64 patients (64 %) in the ERAS and pre-ERAS groups, respectively (p = 0.046). The median length of stay was significantly shorter for the ERAS group (8 vs. 10 days, p = 0.006). The total mean costs per patient were €38,726 and €42,356 for ERAS and pre-ERAS (p = 0.467). The cost-minimization analysis showed a total mean cost reduction of €3080 per patient after ERAS implementation. ERAS implementation for liver surgery induced a non-significant decrease in cost compared to standard care. Significant decreased complication rate and hospital stay were observed in the ERAS group.

  11. Manipulative therapy in addition to usual medical care accelerates recovery of shoulder complaints at higher costs: economic outcomes of a randomized trial

    Directory of Open Access Journals (Sweden)

    Bergman Gert JD

    2010-09-01

    Full Text Available Abstract Background Shoulder complaints are common in primary care and have unfavourable long term prognosis. Our objective was to evaluate the clinical effectiveness of manipulative therapy of the cervicothoracic spine and the adjacent ribs in addition to usual medical care (UMC by the general practitioner in the treatment of shoulder complaints. Methods This economic evaluation was conducted alongside a randomized trial in primary care. Included were 150 patients with shoulder complaints and a dysfunction of the cervicothoracic spine and adjacent ribs. Patients were treated with UMC (NSAID's, corticosteroid injection or referral to physical therapy and were allocated at random (yes/no to manipulative therapy (manipulation and mobilization. Patient perceived recovery, severity of main complaint, shoulder pain, disability and general health were outcome measures. Data about direct and indirect costs were collected by means of a cost diary. Results Manipulative therapy as add-on to UMC accelerated recovery on all outcome measures included. At 26 weeks after randomization, both groups reported similar recovery rates (41% vs. 38%, but the difference between groups in improvement of severity of the main complaint, shoulder pain and disability sustained. Compared to the UMC group the total costs were higher in the manipulative group (€1167 vs. €555. This is explained mainly by the costs of the manipulative therapy itself and the higher costs due sick leave from work. The cost effectiveness ratio showed that additional manipulative treatment is more costly but also more effective than UMC alone. The cost-effectiveness acceptability curve shows that a 50%-probability of recovery with AMT within 6 months after initiation of treatment is achieved at €2876. Conclusion Manipulative therapy in addition to UMC accelerates recovery and is more effective than UMC alone on the long term, but is associated with higher costs. International Standard

  12. Lowering operation costs by energy recovery

    Energy Technology Data Exchange (ETDEWEB)

    Wegener, W; Hausmann, H; Hausmann, K H

    1976-01-01

    Heat recovery and the heat sources available as well as possible applications of the heat recovered are discussed. Groundwater, shower water and waste air are considered as energy sources. Energy recovery by means of finned-tube systems and the heat pump, and economic aspects of the techniques are described.

  13. Energy Recovery Hydropower: Prospects for Off-Setting Electricity Costs for Agricultural, Municipal, and Industrial Water Providers and Users; July 2017 - September 2017

    Energy Technology Data Exchange (ETDEWEB)

    Levine, Aaron L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Curtis, Taylor L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Johnson, Kurt [Telluride Energy; Telluride, CO (United States)

    2018-01-11

    Energy recovery hydropower is one of the most cost-effective types of new hydropower development because it is constructed utilizing existing infrastructure, and it is typically able to complete Federal Energy Regulatory Commission (FERC) review in 60 days. Recent changes in federal and state policy have supported energy recovery hydropower. In addition, some states have developed programs and policies to support energy recovery hydropower, including resource assessments, regulatory streamlining initiatives, and grant and loan programs to reduce project development costs. This report examines current federal and state policy drivers for energy recovery hydropower, reviews market trends, and looks ahead at future federal resource assessments and hydropower reform legislation.

  14. 77 FR 4997 - Proposed Information Collection; Comment Request; Alaska Individual Fishing Quota Cost Recovery...

    Science.gov (United States)

    2012-02-01

    ... Jessup, Departmental Paperwork Clearance Officer, Department of Commerce, Room 6616, 14th and... about the value of landings of IFQ species and to calculate and submit fees. The Cost Recovery Program.... Estimated Number of Respondents: 2,500. Estimated Time per Response: 2 hours to complete IFQ Permit Holder...

  15. Treated Seawater as a Magnesium Source for Phosphorous Recovery from Wastewater—A Feasibility and Cost Analysis

    Directory of Open Access Journals (Sweden)

    Cejna Anna Quist-Jensen

    2016-12-01

    Full Text Available Conventional resources of phosphorous are at high risk of depletion in the near future due to current practices of its exploitation, thus new and improved exploration methodologies need to be developed to ensure phosphorous security. Today, some treatment plants recover phosphorous from municipal wastewater as struvite (MgNH4PO4·6H2O. Magnesium is often added to the wastewater as MgCl2·6H2O to facilitate the phosphorous recovery. However, the use of magnesium increases the costs of the process and is not aligned with sustainable development, therefore, alternative magnesium sources have to be found. The current study analyzes the feasibility of integrated membrane processes for magnesium recovery from seawater for utilization in the phosphorous recovery process. The integrated membrane systems consist of nanofiltration (NF, membrane distillation (MD, and membrane crystallization (MCr. The lowest associated cost is found for standalone NF treatment. However, the additional treatment with MD and MCr produces fresh water and salts like NaCl or potentially other valuable minerals at the expense of low-grade heat.

  16. Guidance Document - Full-cost Recovery for Molybdenum-99 Irradiation Services: Methodology and Implementation

    International Nuclear Information System (INIS)

    Westmacott, Chad; Cameron, Ron

    2012-02-01

    At the request of its member countries, the OECD Nuclear Energy Agency (NEA) became involved in global efforts to ensure a reliable supply of molybdenum-99 ( 99 Mo) and its decay product, technetium-99m (' 99m Tc), the most widely used medical radioisotope. The NEA established the High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) in 2009. Under its first mandate (June 2009-2011), the HLG-MR examined the major issues that affect the short-, medium- and long-term reliability of 99 Mo/' 99m Tc supply and then developed a policy approach to move the supply chain to a sustainable basis and ensure security of supply. The objectives of the HLG-MR during its second mandate (July 2011-2013) are to work towards increasing the long-term security of supply of 99 Mo and ' 99m Tc, especially through the implementation of the HLG-MR policy approach and its associated recommendations. This will entail actions to maintain transparency on global developments, continue communication with the supply chain and end users, evaluate progress toward implementation and provide additional information and analysis where necessary. A key action under the second mandate is to provide guidance on the implementation of the HLG-MR policy approach. This document provides guidance to reactor and alternative production technology (e.g., cyclotrons, accelerators) operators on how to undertake full-cost identification and implement full-cost recovery. The document also discusses issues related to levelling the playing field between old and new reactors. In order to move toward a long-term secure supply of 99 Mo and ' 99m Tc, the HLG-MR policy approach will need to be implemented by all countries that have an impact on the global market - as producers or consumers. A key recommendation of the policy approach is the implementation of full-cost identification and recovery by operators of 99 Mo-producing research reactors or alternative technologies. This document provides the

  17. Cost-benefit analysis of copper recovery in remediation projects: A case study from Sweden.

    Science.gov (United States)

    Volchko, Yevheniya; Norrman, Jenny; Rosén, Lars; Karlfeldt Fedje, Karin

    2017-12-15

    Contamination resulting from past industrial activity is a problem throughout the world and many sites are severely contaminated by metals. Advances in research in recent years have resulted in the development of technologies for recovering metal from metal-rich materials within the framework of remediation projects. Using cost-benefit analysis (CBA), and explicitly taking uncertainties into account, this paper evaluates the potential social profitability of copper recovery as part of four remediation alternatives at a Swedish site. One alternative involves delivery of copper-rich ash to a metal production company for refining. The other three alternatives involve metal leaching from materials and sale of the resulting metal sludge for its further processing at a metal production company using metallurgical methods. All the alternatives are evaluated relative to the conventional excavation and disposal method. Metal recovery from the ash, metal sludge sale, and disposal of the contaminated soil and the ash residue at the local landfill site, was found to be the best remediation alternative. However, given the present conditions, its economic potential is low relative to the conventional excavation and disposal method but higher than direct disposal of the copper-rich ash for refining. Volatile copper prices, the high cost of processing equipment, the highly uncertain cost of the metal leaching and washing process, coupled with the substantial project risks, contribute most to the uncertainties in the CBA results for the alternatives involving metal leaching prior to refining. However, investment in processing equipment within the framework of a long-term investment project, production of safe, reusable soil residue, and higher copper prices on the metal market, can make metal recovery technology socially profitable. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Unbundling payments for radioisotopes from radiopharmaceuticals and from diagnostic procedures: A tool to support the implementation of full-cost recovery. NEA discussion document

    International Nuclear Information System (INIS)

    2012-01-01

    The objective of the NEA's HLG-MR policy approach is to ensure a long-term secure supply. The HLG-MR has determined that to attain that objective, a necessary (but not sufficient) requirement is that irradiation services in the 99 Mo/ 99m Tc supply chain must be provided on a full-cost recovery (FCR) basis (OECD-NEA, 2011). The HLG-MR policy approach also recommended that supply chain participants should implement payment reforms that promote full-cost recovery within their reimbursement systems. Reforms might include separate radioisotope pricing or auditing, separate radioisotope payment, differential radioisotope payment for FCR, or other approaches to promote a complete transition to full-cost recovery

  19. The effect of pre-existing health conditions on the cost of recovery from road traffic injury: insights from data linkage of medicare and compensable injury claims in Victoria, Australia.

    Science.gov (United States)

    Hassani-Mahmooei, Behrooz; Berecki-Gisolf, Janneke; Hahn, Youjin; McClure, Roderick J

    2016-04-29

    Comorbidity is known to affect length of hospital stay and mortality after trauma but less is known about its impact on recovery beyond the immediate post-accident care period. The aim of this study was to investigate the role of pre-existing health conditions in the cost of recovery from road traffic injury using health service use records for 1 year before and after the injury. Individuals who claimed Transport Accident Commission (TAC) compensation for a non-catastrophic injury that occurred between 2010 and 2012 in Victoria, Australia and who provided consent for Pharmaceutical Benefits Scheme (PBS) and Medicare Benefits Schedule (MBS) linkage were included (n = 738) in the analysis. PBS and MBS records dating from 12 months prior to injury were provided by the Department of Human Services (Canberra, Australia). Pre-injury use of health service items and pharmaceuticals were considered to indicate pre-existing health condition. Bayesian Model Averaging techniques were used to identify the items that were most strongly correlated with recovery cost. Multivariate regression models were used to determine the impact of these items on the cost of injury recovery in terms of compensated ambulance, hospital, medical, and overall claim cost. Out of the 738 study participants, 688 used at least one medical item (total of 15,625 items) and 427 used at least one pharmaceutical item (total of 9846). The total health service cost of recovery was $10,115,714. The results show that while pre-existing conditions did not have any significant impact on the total cost of recovery, categorical costs were affected: e.g. on average, for every anaesthetic in the year before the accident, hospital cost of recovery increased by 24 % [95 % CI: 13, 36 %] and for each pathological test related to established diabetes, hospital cost increased by $10,407 [5466.78, 15346.28]. For medical costs, each anaesthetic led to $258 higher cost [174.16, 341.16] and every prescription of drugs

  20. Recovery Risk and Labor Costs in Public-Private Partnerships : Contractual Choice in the US Water industry

    OpenAIRE

    Albalate, Daniel, 1980-; Bel i Queralt, Germà, 1963-; Geddes, R. Richard

    2012-01-01

    We use an ordered logistic model to empirically examine the factors that explain varying degrees of private involvement in the U.S. water sector through public-private partnerships. Our estimates suggest that a variety of factors help explain greater private participation in this sector. We find that the risk to private participants regarding cost recovery is an important driver of private participation. The relative cost of labor is also a key factor in determining the degree of private invo...

  1. Un-bundling payments for radioisotopes from radiopharmaceuticals and from diagnostic procedures: A tool to support the implementation of full-cost recovery - NEA discussion document

    International Nuclear Information System (INIS)

    2012-09-01

    The objective of the NEA's HLG-MR policy approach is to ensure a long-term secure supply. The HLG-MR has determined that to attain that objective, a necessary (but not sufficient) requirement is that irradiation services in the 99 Mo/' 99m Tc supply chain must be provided on a full-cost recovery (FCR) basis (OECD-NEA, 2011). The HLG-MR policy approach also recommended that supply chain participants should implement payment reforms that promote full-cost recovery within their reimbursement systems. Reforms might include separate radioisotope pricing or auditing, separate radioisotope payment, differential radioisotope payment for FCR, or other approaches to promote a complete transition to full-cost recovery. This paper is written to provide a basis for further discussion on the use of separate reimbursement to encourage the move to full-cost recovery. Separate reimbursement is one tool that could be used by public and private health insurance to support the move to ensuring sufficient reimbursement rates (or payments) for 99 Mo/' 99m Tc while the industry moves to full-cost recovery for irradiation services, paying for outage reserve capacity and transitioning to using LEU targets. Other tools are available (such as differential payments, separate radioisotope payments, auditing) that could lead to similar outcomes that support the changes necessary in the 99 Mo/' 99m Tc supply chain to ensure a long-term reliable supply of these important medical isotopes

  2. Recovery of Utility Fixed Costs: Utility, Consumer, Environmental and Economist Perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Lisa [Inst. for Electric Innovation and The Edison Foundation, Washington DC (United States); Hemphill, Ross [RCHemphill Solutions, Columbus, OH (United States); Howat, John [National Consumer Law Center, Boston, MA (United States); Cavanagh, Ralph [Natural Resources Defense Council, New York, NY (United States); Borenstein, Severin [Univ. of California, Berkeley, CA (United States); Deason, Jeff [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-06-14

    Utilities recover costs for providing electric service to retail customers through a combination of rate components that together comprise customers’ monthly electric bills. Rates and rate designs are set by state regulators and vary by jurisdiction, utility and customer class. In addition to the fundamental tenet of setting fair and reasonable rates, rate design balances economic efficiency, equity and fairness, customer satisfaction, utility revenue stability, and customer price and bill stability.1 At the most basic level, retail electricity bills in the United States typically include a fixed monthly customer charge — a set dollar amount regardless of energy usage — and a volumetric energy charge for each kilowatt-hour consumed.2 The energy charge may be flat across all hours, vary by usage level (for example, higher rates at higher levels of usage), or vary based on time of consumption.3 While some utility costs, such as fuel costs, clearly vary according to electricity usage, other costs are “fixed” over the short run — generally, those that do not vary over the course of a year. Depending on your point of view, and whether the state’s electricity industry has been restructured or remains vertically integrated, the set of costs that are “fixed” may be quite limited. Or the set may extend to all capacity costs for generation, transmission and distribution. In the long run, all costs are variable. In the context of flat or declining loads in some regions, utilities are proposing a variety of changes to retail rate designs, particularly for residential customers, to recover fixed costs. In this report, authors representing utility (Chapter 1), consumer (Chapter 2), environmentalist (Chapter 3) and economist (Chapter 4) perspectives discuss fixed costs for electric utilities and set out their principles for recovering those costs. The table on the next page summarizes each author’s relative preferences for various options for fixed cost

  3. The economic effect of electricity net-metering with solar PV: Consequences for network cost recovery, cross subsidies and policy objectives

    International Nuclear Information System (INIS)

    Eid, Cherrelle; Reneses Guillén, Javier; Frías Marín, Pablo; Hakvoort, Rudi

    2014-01-01

    Net-metering is commonly known as a practice by which owners of distributed generation (DG) units may offset their electricity consumption from the grid with local generation. The increasing number of prosumers (consumers that both produce and consume electricity) with solar photovoltaic (PV) generation combined with net-metering results in reduced incomes for many network utilities worldwide. Consequently, this pushes utilities to increase charges per kW h in order to recover costs. For non-PV owners, this could result into inequality issues due to the fact that also non-PV owners have to pay higher chargers for their electricity consumed to make up for netted costs of PV-owners. In order to provide insight in those inequality issues caused by net-metering, this study presents the effects on cross-subsidies, cost recovery and policy objectives evolving from different applied netmetering and tariff designs for a residential consumer. Eventually this paper provides recommendations regarding tariffs and metering that will result in more explicit incentives for PV, instead of the current implicit incentives which are present to PV owners due to net-metering. - Highlights: • Network users are frequently charged by energy charging and fixed charging. • Net-metering with energy charging causes potential problems for DSO cost recovery. • Increasing rolling credit timeframes amplify net-metering impacts on cost recovery. • Observed capacity charging can incentivize local storage and self-consumption. • PV owners should receive direct incentives in order to avoid cross subsidization

  4. [Cost recovery for the treatment of retinal and vitreal diseases by pars plana vitrectomy under the German DRG system].

    Science.gov (United States)

    Framme, C; Franz, D; Mrosek, S; Helbig, H

    2007-10-01

    Since 2004 inpatient health care in Germany is paid according to calculated DRGs. Only a few university hospitals participated in distinct cost calculations of clinical treatment. It was the aim of this study to check the cost recovery at a University Eye Hospital for the surgical treatment of retinal and vitreal diseases by pars plana vitrectomy (ppV), which are included in DRGs C03Z and C17Z. The performance data for both DRGs were collected for the years 2005 and 2006 using the E1 sheets according to section 21 KHEntG. The mean duration of all procedures was collected by data from the internal controlling. Costs for single operations were calculated from fixed and variable costs for the operation theatre and the ward including costs for personnel and material. In the 2-year period of 4,721 inpatient procedures 1,307 ppVs were performed. Each ppV had fixed surgical costs of 130.60 EUR; personnel costs varied between 575 EUR (C03Z; including cataract surgery; mean OP duration: 85 min) and 510 EUR (C17Z; no cataract surgery; mean OP duration: 73 min) at a proportion between general anaesthesia and local anaesthesia of 80/20. For a pure ppV material costs were 255 EUR. Additional adjuncts such as an encircling band, perfluorcarbon, ICG, tPA, gas and silicon oil or cataract surgery led to extra costs between 51 EUR and 250 EUR per adjunct und were used in 56% (C03Z) and 74.5% (C17Z) of all procedures. Costs for hospitalisation were about 1765 EUR at a mean residence time of 6.5 days. Thus, the overall costs of a pure basic ppV amounted to 2975 EUR (C03Z) and 2661 EUR (C17Z). In consideration of the current relative DRG weights of 1.08 and 0.957 and a current base rate of 2787.19 EUR in Bavaria, cost recovery is only given for basic ppV but not for complex ppVs having higher material and personnel costs. Additionally, the costs for multiple surgeries as occur in 5.9% of cases are not compensated by the DRG system. The reimbursement for inpatient ppVs in a University

  5. 76 FR 10028 - Settlement Agreement for Recovery of Past Response Costs 10,000 Havana Street Site, Commerce City...

    Science.gov (United States)

    2011-02-23

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9269-7] Settlement Agreement for Recovery of Past Response Costs 10,000 Havana Street Site, Commerce City, Adams County, CO AGENCY: Environmental Protection Agency. ACTION: Notice and request for public comment. SUMMARY: In accordance with the requirements of Section...

  6. A prospective cohort study to investigate cost-minimisation, of Traditional open, open fAst track recovery and laParoscopic fASt track multimodal management, for surgical patients with colon carcinomas (TAPAS study

    Directory of Open Access Journals (Sweden)

    van Duivendijk Peter

    2010-06-01

    Full Text Available Abstract Background The present developments in colon surgery are characterized by two innovations: the introduction of the laparoscopic operation technique and fast recovery programs such as the Enhanced Recovery After Surgery (ERAS recovery program. The Tapas-study was conceived to determine which of the three treatment programs: open conventional surgery, open 'ERAS' surgery or laparoscopic 'ERAS' surgery for patients with colon carcinomas is most cost minimizing? Method/design The Tapas-study is a three-arm multicenter prospective cohort study. All patients with colon carcinoma, eligible for surgical treatment within the study period in four general teaching hospitals and one university hospital will be included. This design produces three cohorts: Conventional open surgery is the control exposure (cohort 1. Open surgery with ERAS recovery (cohort 2 and laparoscopic surgery with ERAS recovery (cohort 3 are the alternative exposures. Three separate time periods are used in order to prevent attrition bias. Primary outcome parameters are the two main cost factors: direct medical costs (real cost price calculation and the indirect non medical costs (friction method. Secondary outcome parameters are mortality, complications, surgical-oncological resection margins, hospital stay, readmission rates, time back to work/recovery, health status and quality of life. Based on an estimated difference in direct medical costs (highest cost factor of 38% between open and laparoscopic surgery (alfa = 0.01, beta = 0.05, a group size of 3×40 = 120 patients is calculated. Discussion The Tapas-study is three-arm multicenter cohort study that will provide a cost evaluation of three treatment programs for patients with colon carcinoma, which may serve as a guideline for choice of treatment and investment strategies in hospitals. Trial registration ISRCTN44649165.

  7. Bioenergy, material, and nutrients recovery from household waste: Advanced material, substance, energy, and cost flow analysis of a waste refinery process

    International Nuclear Information System (INIS)

    Tonini, Davide; Dorini, Gianluca; Astrup, Thomas Fruergaard

    2014-01-01

    Highlights: • We modeled material, substance, energy, and cost flows of a waste refinery process. • Ca. 56% of 1 Mg dry waste input can be recovered as bioliquid yielding 6.2 GJ biogas. • Nutrients and carbon recovery in the bioliquid was estimated to 81–89%. • The biogenic carbon in the input waste was 63% of total carbon based on 14 C analyses. • The quality of the digestate may be critical with respect to use on land. - Abstract: Energy, materials, and resource recovery from mixed household waste may contribute to reductions in fossil fuel and resource consumption. For this purpose, legislation has been enforced to promote energy recovery and recycling. Potential solutions for separating biogenic and recyclable materials are offered by waste refineries where a bioliquid is produced from enzymatic treatment of mixed waste. In this study, potential flows of materials, energy, and substances within a waste refinery were investigated by combining sampling, analyses, and modeling. Existing material, substance, and energy flow analysis was further advanced by development of a mathematical optimization model for determination of the theoretical recovery potential. The results highlighted that the waste refinery may recover ca. 56% of the dry matter input as bioliquid, yielding 6.2 GJ biogas-energy. The potential for nitrogen, phosphorous, potassium, and biogenic carbon recovery was estimated to be between 81% and 89% of the input. Biogenic and fossil carbon in the mixed household waste input was determined to 63% and 37% of total carbon based on 14 C analyses. Additional recovery of metals and plastic was possible based on further process optimization. A challenge for the process may be digestate quality, as digestate may represent an emission pathway when applied on land. Considering the potential variability of local revenues for energy outputs, the costs for the waste refinery solution appeared comparable with alternatives such as direct incineration

  8. Life cycle cost of a hybrid forward osmosis - low pressure reverse osmosis system for seawater desalination and wastewater recovery.

    Science.gov (United States)

    Valladares Linares, R; Li, Z; Yangali-Quintanilla, V; Ghaffour, N; Amy, G; Leiknes, T; Vrouwenvelder, J S

    2016-01-01

    In recent years, forward osmosis (FO) hybrid membrane systems have been investigated as an alternative to conventional high-pressure membrane processes (i.e. reverse osmosis (RO)) for seawater desalination and wastewater treatment and recovery. Nevertheless, their economic advantage in comparison to conventional processes for seawater desalination and municipal wastewater treatment has not been clearly addressed. This work presents a detailed economic analysis on capital and operational expenses (CAPEX and OPEX) for: i) a hybrid forward osmosis - low-pressure reverse osmosis (FO-LPRO) process, ii) a conventional seawater reverse osmosis (SWRO) desalination process, and iii) a membrane bioreactor - reverse osmosis - advanced oxidation process (MBR-RO-AOP) for wastewater treatment and reuse. The most important variables affecting economic feasibility are obtained through a sensitivity analysis of a hybrid FO-LPRO system. The main parameters taken into account for the life cycle costs are the water quality characteristics (similar feed water and similar water produced), production capacity of 100,000 m(3) d(-1) of potable water, energy consumption, materials, maintenance, operation, RO and FO module costs, and chemicals. Compared to SWRO, the FO-LPRO systems have a 21% higher CAPEX and a 56% lower OPEX due to savings in energy consumption and fouling control. In terms of the total water cost per cubic meter of water produced, the hybrid FO-LPRO desalination system has a 16% cost reduction compared to the benchmark for desalination, mainly SWRO. Compared to the MBR-RO-AOP, the FO-LPRO systems have a 7% lower CAPEX and 9% higher OPEX, resulting in no significant cost reduction per m(3) produced by FO-LPRO. Hybrid FO-LPRO membrane systems are shown to have an economic advantage compared to current available technology for desalination, and comparable costs with a wastewater treatment and recovery system. Based on development on FO membrane modules, packing density, and

  9. LOWER COST METHODS FOR IMPROVED OIL RECOVERY (IOR) VIA SURFACTANT FLOODING

    Energy Technology Data Exchange (ETDEWEB)

    William A. Goddard III; Yongchun Tang; Patrick Shuler; Mario Blanco; Seung Soon Jang; Shiang-Tai Lin; Prabal Maiti; Yongfu Wu; Stefan Iglauer; Xiaohang Zhang

    2004-09-01

    This report provides a summary of the work performed in this 3-year project sponsored by DOE. The overall objective of this project is to identify new, potentially more cost-effective surfactant formulations for improved oil recovery (IOR). The general approach is to use an integrated experimental and computational chemistry effort to improve our understanding of the link between surfactant structure and performance, and from this knowledge, develop improved IOR surfactant formulations. Accomplishments for the project include: (1) completion of a literature review to assemble current and new surfactant IOR ideas, (2) Development of new atomistic-level MD (molecular dynamic) modeling methodologies to calculate IFT (interfacial tension) rigorously from first principles, (3) exploration of less computationally intensive mesoscale methods to estimate IFT, Quantitative Structure Property Relationship (QSPR), and cohesive energy density (CED) calculations, (4) experiments to screen many surfactant structures for desirable low IFT and solid adsorption behavior, and (5) further experimental characterization of the more promising new candidate formulations (based on alkyl polyglycosides (APG) and alkyl propoxy sulfate surfactants). Important findings from this project include: (1) the IFT between two pure substances may be calculated quantitatively from fundamental principles using Molecular Dynamics, the same approach can provide qualitative results for ternary systems containing a surfactant, (2) low concentrations of alkyl polyglycoside surfactants have potential for IOR (Improved Oil Recovery) applications from a technical standpoint (if formulated properly with a cosurfactant, they can create a low IFT at low concentration) and also are viable economically as they are available commercially, and (3) the alkylpropoxy sulfate surfactants have promising IFT performance also, plus these surfactants can have high optimal salinity and so may be attractive for use in higher

  10. Energy and cost savings potential of oscillating heat pipes for waste heat recovery ventilation

    Directory of Open Access Journals (Sweden)

    Govinda Mahajan

    2017-11-01

    Full Text Available The feasibility of using finned oscillating heat pipes (OHPs for heat exchange between counter-flowing air streams in HVAC air systems (i.e., outdoor and exhaust air flows, along with the associated cost savings in typical North American climates, is investigated. For a prescribed temperature difference and volumetric flow rate of air, rudimentary design parameters for a viable OHP Heat Recovery Ventilator (OHP-HRV were determined using the ε-NTU (effectiveness-Number of Transfer Unit method. The two-phase heat transfer within the OHP-HRV is modeled via effective evaporation/condensation heat transfer coefficients, while the latent heat transfer required to initiate OHP operation via boiling and evaporation is also considered. Results suggest that an OHP-HRV can possess a reasonable pressure drop (5 kW. The proposed OHP-HRV can possess an effectiveness near 0.5 and can pre-cool/heat HVAC air by >5°C. Potential energy and cost savings associated with using an OHP-HRV were estimated for commercial building envelopes in various regions of the United States. It is found that the proposed OHP-HRV can save more than $2500 annually in cities that have continental climatic conditions, such as Chicago and Denver, and for the selected locations the average yearly cost savings per building is found to be on-the-order of $700. Overall, the OHP-HRV shows potential in effectively reducing energy consumption and the operational cost of air handling units in buildings.

  11. Longitudinal Recovery and Reduced Costs After 120 Sessions of Locomotor Training for Motor Incomplete Spinal Cord Injury.

    Science.gov (United States)

    Morrison, Sarah A; Lorenz, Douglas; Eskay, Carol P; Forrest, Gail F; Basso, D Michele

    2018-03-01

    To determine the impact of long-term, body weight-supported locomotor training after chronic, incomplete spinal cord injury (SCI), and to estimate the health care costs related to lost recovery potential and preventable secondary complications that may have occurred because of visit limits imposed by insurers. Prospective observational cohort with longitudinal follow-up. Eight outpatient rehabilitation centers that participate in the Christopher & Dana Reeve Foundation NeuroRecovery Network (NRN). Individuals with motor incomplete chronic SCI (American Spinal Injury Association Impairment Scale C or D; N=69; 0.1-45y after SCI) who completed at least 120 NRN physical therapy sessions. Manually assisted locomotor training (LT) in a body weight-supported treadmill environment, overground standing and stepping activities, and community integration tasks. International Standards for Neurological Classification of Spinal Cord Injury motor and sensory scores, orthostatic hypotension, bowel/bladder/sexual function, Spinal Cord Injury Functional Ambulation Inventory (SCI-FAI), Berg Balance Scale, Modified Functional Reach, 10-m walk test, and 6-minute walk test. Longitudinal outcome measure collection occurred every 20 treatments and at 6- to 12-month follow-up after discharge from therapy. Significant improvement occurred for upper and lower motor strength, functional activities, psychological arousal, sensation of bowel movement, and SCI-FAI community ambulation. Extended training enabled minimal detectable changes at 60, 80, 100, and 120 sessions. After detectable change occurred, it was sustained through 120 sessions and continued 6 to 12 months after treatment. Delivering at least 120 sessions of LT improves recovery from incomplete chronic SCI. Because walking reduces rehospitalization, LT delivered beyond the average 20-session insurance limit can reduce rehospitalizations and long-term health costs. Copyright © 2018 American Congress of Rehabilitation Medicine

  12. Battleground Energy Recovery Project

    Energy Technology Data Exchange (ETDEWEB)

    Bullock, Daniel [USDOE Gulf Coast Clean Energy Application Center, Woodlands, TX (United States)

    2011-12-31

    In October 2009, the project partners began a 36-month effort to develop an innovative, commercial-scale demonstration project incorporating state-of-the-art waste heat recovery technology at Clean Harbors, Inc., a large hazardous waste incinerator site located in Deer Park, Texas. With financial support provided by the U.S. Department of Energy, the Battleground Energy Recovery Project was launched to advance waste heat recovery solutions into the hazardous waste incineration market, an area that has seen little adoption of heat recovery in the United States. The goal of the project was to accelerate the use of energy-efficient, waste heat recovery technology as an alternative means to produce steam for industrial processes. The project had three main engineering and business objectives: Prove Feasibility of Waste Heat Recovery Technology at a Hazardous Waste Incinerator Complex; Provide Low-cost Steam to a Major Polypropylene Plant Using Waste Heat; and Create a Showcase Waste Heat Recovery Demonstration Project.

  13. The difference between energy consumption and energy cost: Modelling energy tariff structures for water resource recovery facilities.

    Science.gov (United States)

    Aymerich, I; Rieger, L; Sobhani, R; Rosso, D; Corominas, Ll

    2015-09-15

    The objective of this paper is to demonstrate the importance of incorporating more realistic energy cost models (based on current energy tariff structures) into existing water resource recovery facilities (WRRFs) process models when evaluating technologies and cost-saving control strategies. In this paper, we first introduce a systematic framework to model energy usage at WRRFs and a generalized structure to describe energy tariffs including the most common billing terms. Secondly, this paper introduces a detailed energy cost model based on a Spanish energy tariff structure coupled with a WRRF process model to evaluate several control strategies and provide insights into the selection of the contracted power structure. The results for a 1-year evaluation on a 115,000 population-equivalent WRRF showed monthly cost differences ranging from 7 to 30% when comparing the detailed energy cost model to an average energy price. The evaluation of different aeration control strategies also showed that using average energy prices and neglecting energy tariff structures may lead to biased conclusions when selecting operating strategies or comparing technologies or equipment. The proposed framework demonstrated that for cost minimization, control strategies should be paired with a specific optimal contracted power. Hence, the design of operational and control strategies must take into account the local energy tariff. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Life cycle cost of a hybrid forward osmosis – low pressure reverse osmosis system for seawater desalination and wastewater recovery

    KAUST Repository

    Valladares Linares, Rodrigo

    2015-10-19

    In recent years, forward osmosis (FO) hybrid membrane systems have been investigated as an alternative to conventional high-pressure membrane processes (i.e. reverse osmosis (RO)) for seawater desalination and wastewater treatment and recovery. Nevertheless, their economic advantage in comparison to conventional processes for seawater desalination and municipal wastewater treatment has not been clearly addressed. This work presents a detailed economic analysis on capital and operational expenses (CAPEX and OPEX) for: i) a hybrid forward osmosis – low-pressure reverse osmosis (FO-LPRO) process, ii) a conventional seawater reverse osmosis (SWRO) desalination process, and iii) a membrane bioreactor – reverse osmosis – advanced oxidation process (MBR-RO-AOP) for wastewater treatment and reuse. The most important variables affecting economic feasibility are obtained through a sensitivity analysis of a hybrid FO-LPRO system. The main parameters taken into account for the life cycle costs are the water quality characteristics (similar feed water and similar water produced), production capacity of 100,000 m3 d−1 of potable water, energy consumption, materials, maintenance, operation, RO and FO module costs, and chemicals. Compared to SWRO, the FO-LPRO systems have a 21% higher CAPEX and a 56% lower OPEX due to savings in energy consumption and fouling control. In terms of the total water cost per cubic meter of water produced, the hybrid FO-LPRO desalination system has a 16% cost reduction compared to the benchmark for desalination, mainly SWRO. Compared to the MBR-RO-AOP, the FO-LPRO systems have a 7% lower CAPEX and 9% higher OPEX, resulting in no significant cost reduction per m3 produced by FO-LPRO. Hybrid FO-LPRO membrane systems are shown to have an economic advantage compared to current available technology for desalination, and comparable costs with a wastewater treatment and recovery system. Based on development on FO membrane modules, packing density, and

  15. Isolation and recovery of microbial polyhydroxyalkanoates

    Directory of Open Access Journals (Sweden)

    2011-07-01

    Full Text Available The deleterious environmental impacts caused by plastic wastes have attracted worldwide concern. The biobased and biodegradable polyhydroxyalkanoate (PHA appears to be one of the potential candidates to replace some conventional plastics. However, high production cost of PHAs has limited their market penetration. The major cost absorbing factors are the upstream fermentation processes and the downstream PHA recovery technologies. The latter significantly affects the overall process economics. Various recovery technologies have been proposed and studied in small scales in the laboratory as well as in industrial scales. These include solvent extraction, chemical digestion, enzymatic treatment and mechanical disruption, supercritical fluid disruption, flotation techniques, use of gamma irradiation and aqueous two-phase system. This paper reviews all the recovery methods known to date and compares their efficiency and the quality of the resulting PHA. Some of the large-scale production of PHA and the strategies employed to reduce the production cost are also discussed.

  16. Can treatment and disposal costs be reduced through metal recovery?

    Science.gov (United States)

    Smith, Kathleen S.; Figueroa, Linda; Plumlee, Geoffrey S.

    2015-01-01

    This paper describes a framework to conduct a “metal-recovery feasibility assessment” for mining influenced water (MIW) and associated treatment sludge. There are multiple considerations in such a determination, including the geologic/geochemical feasibility, market feasibility, technical feasibility, economic feasibility, and administrative feasibility. Each of these considerations needs to be evaluated to determine the practicality of metal recovery from a particular MIW.

  17. Integrating the Carbon and Water Footprints’ Costs in the Water Framework Directive 2000/60/EC Full Water Cost Recovery Concept: Basic Principles Towards Their Reliable Calculation and Socially Just Allocation

    Directory of Open Access Journals (Sweden)

    Anastasia Papadopoulou

    2012-01-01

    Full Text Available This paper presents the basic principles for the integration of the water and carbon footprints cost into the resource and environmental costs respectively, taking the suggestions set by the Water Framework Directive (WFD 2000/60/EC one step forward. WFD states that full water cost recovery (FWCR should be based on the estimation of the three sub-costs related: direct; environmental; and resource cost. It also strongly suggests the EU Member States develop and apply effective water pricing policies to achieve FWCR. These policies must be socially just to avoid any social injustice phenomena. This is a very delicate task to handle, especially within the fragile economic conditions that the EU is facing today. Water losses play a crucial role for the FWC estimation. Water losses should not be neglected since they are one of the major “water uses” in any water supply network. A methodology is suggested to reduce water losses and the related Non Revenue Water (NRW index. An Expert Decision Support System is proposed to assess the FWC incorporating the Water and Carbon Footprint costs.

  18. Supplying synthetic crude oil from Canadian oil sands: A comparative study of the costs and CO2 emissions of mining and in-situ recovery

    International Nuclear Information System (INIS)

    Méjean, Aurélie; Hope, Chris

    2013-01-01

    High crude oil prices and the eventual decline of conventional oil production raise the issue of alternative fuels such as non-conventional oil. The paper describes a simple probabilistic model of the costs of synthetic crude oil produced from Canadian oil sands. Synthetic crude oil is obtained by upgrading bitumen that is first produced through mining or in-situ recovery techniques. This forward-looking analysis quantifies the effects of learning and production constraints on the costs of supplying synthetic crude oil. The sensitivity analysis shows that before 2035, the most influential parameters are the learning parameter in the case of in-situ bitumen and the depletion parameter in the case of mined bitumen. After 2035, depletion dominates in both cases. The results show that the social cost of CO 2 has a large impact on the total costs of synthetic crude oil, in particular in the case of synthetic crude oil from in-situ bitumen, due to the carbon intensity of the recovery techniques: taking into account the social cost of CO 2 adds more than half to the cost of producing synthetic crude oil from mined bitumen in 2050 (mean value), while the cost of producing synthetic crude oil from in-situ bitumen more than doubles. - Highlights: • We model the cost of Canadian synthetic crude oil (SCO) using Monte-Carlo techniques. • We reveal the uncertainty associated with each input parameter. • We quantify the effect of learning, depletion and CO 2 using sensitivity analyses. • Accounting for the social cost of CO 2 doubles the cost of SCO from in-situ bitumen. • CO 2 pricing could have a large effect on the economics of the oil sands

  19. Fluid diversion in oil recovery

    International Nuclear Information System (INIS)

    Nimir, Hassan B.

    1999-01-01

    In any oil recovery process, large scale heterogeneities, such as fractures, channels, or high-permeability streaks, can cause early break through of injected fluid which will reduce oil recovery efficiency. In waterflooding, enhanced oil recovery, and acidizing operations, this problem is particularly acute because of the cost of the injected fluid. On the other hand coping with excess water production is always a challenging task for field operators. The cost of handling and disposing produced water can significantly shorten the economic production life of an oil well. The hydrostatic pressure created by high fluid levels in a well (water coning) is also detrimental to oil production. In this paper, the concept of fluid diversion is explained. Different methods that are suggested to divert the fluid into the oil-bearing-zones are briefly discussed, to show their advantages and disadvantages. Methods of reducing water production in production well are also discussed. (Author)

  20. Implementation of enhanced recovery programme for laparoscopic distal pancreatectomy: feasibility, safety and cost analysis.

    Science.gov (United States)

    Richardson, John; Di Fabio, Francesco; Clarke, Hannah; Bajalan, Mohammed; Davids, Joe; Abu Hilal, Mohammed

    2015-01-01

    The adoption of laparoscopy for distal pancreatectomy has proven to substantially improve short-term outcomes. Stress response after major surgery can be further minimized within an enhanced recovery programme (ERP). However, data on the potential benefit of an ERP for laparoscopic distal pancreatectomy are still lacking. The aim was to assess the feasibility, safety and cost of ERP for patients undergoing laparoscopic distal pancreatectomy. This is a case-control study from a Tertiary University Hospital. Sixty-six consecutive patients who underwent laparoscopic distal pancreatectomy were analyzed. Twenty-two patients were enrolled for the ERP and compared with previous consecutive 44 patients managed traditionally (1:2 ratio). Operative details, post-operative outcome and cost analysis were compared in the two groups. Patients enrolled in the ERP had similar intraoperative blood loss (median 165 ml vs. 200 ml; p = 0.176), operation time (225 min vs. 210 min; p = 0.633), time to remove naso-gastric tube (1 vs. 1 day; p = 0.081) but significantly shorter time to mobilization (median 1 vs. 2 days; p = 0.0001), start solid diet (2 vs. 3 days; p = 0004), and pass stools (3 vs. 5 days; p = 0.002) compared to the control group. Median length of stay was significantly shorter in the ERP group (3 vs. 6 days; p pancreatectomy with significant earlier return to normal gut function, reduced length of stay and cost saving. Copyright © 2015 IAP and EPC. Published by Elsevier B.V. All rights reserved.

  1. Energy recovery from wastes

    International Nuclear Information System (INIS)

    De Stefanis, P.

    1999-01-01

    In this paper are reported analysis of some energy recovery form wastes plants. In this work are considered materials and energy flows, environmental impacts and related treatment costs and financial resources [it

  2. Two-step optimization of pressure and recovery of reverse osmosis desalination process.

    Science.gov (United States)

    Liang, Shuang; Liu, Cui; Song, Lianfa

    2009-05-01

    Driving pressure and recovery are two primary design variables of a reverse osmosis process that largely determine the total cost of seawater and brackish water desalination. A two-step optimization procedure was developed in this paper to determine the values of driving pressure and recovery that minimize the total cost of RO desalination. It was demonstrated that the optimal net driving pressure is solely determined by the electricity price and the membrane price index, which is a lumped parameter to collectively reflect membrane price, resistance, and service time. On the other hand, the optimal recovery is determined by the electricity price, initial osmotic pressure, and costs for pretreatment of raw water and handling of retentate. Concise equations were derived for the optimal net driving pressure and recovery. The dependences of the optimal net driving pressure and recovery on the electricity price, membrane price, and costs for raw water pretreatment and retentate handling were discussed.

  3. Spatially Dispersed Employee Recovery

    DEFF Research Database (Denmark)

    Hvass, Kristian Anders; Torfadóttir, Embla

    2014-01-01

    Employee recovery addresses either employee well-being or management's practices in aiding employees in recovering themselves following a service failure. This paper surveys the cabin crew at a small, European, low-cost carrier and investigates employees' perceptions of management practices to aid...... personnel achieve service recovery. Employee recovery within service research often focuses on front-line employees that work in a fixed location, however a contribution to the field is made by investigating the recovery of spatially dispersed personnel, such as operational personnel in the transport sector......, who have a work place away from a fixed or central location and have minimal management contact. Results suggest that the support employees receive from management, such as recognition, information sharing, training, and strategic awareness are all important for spatially dispersed front...

  4. Evaluation of resource recovery from waste incineration residues--the case of zinc.

    Science.gov (United States)

    Fellner, J; Lederer, J; Purgar, A; Winterstetter, A; Rechberger, H; Winter, F; Laner, D

    2015-03-01

    Solid residues generated at European Waste to Energy plants contain altogether about 69,000 t/a of Zn, of which more than 50% accumulates in air pollution control residues, mainly boiler and filter ashes. Intensive research activities aiming at Zn recovery from such residues recently resulted in a technical scale Zn recovery plant at a Swiss waste incinerator. By acidic leaching and subsequent electrolysis this technology (FLUREC) allows generating metallic Zn of purity>99.9%. In the present paper the economic viability of the FLUREC technology with respect to Zn recovery from different solid residues of waste incineration has been investigated and subsequently been categorised according to the mineral resource classification scheme of McKelvey. The results of the analysis demonstrate that recovery costs for Zn are highly dependent on the costs for current fly ash disposal (e.g. cost for subsurface landfilling). Assuming current disposal practice costs of 220€/ton fly ash, resulting recovery costs for Zn are generally higher than its current market price of 1.6€/kg Zn. With respect to the resource classification this outcome indicates that none of the identified Zn resources present in incineration residues can be economically extracted and thus cannot be classified as a reserve. Only for about 4800 t/a of Zn an extraction would be marginally economic, meaning that recovery costs are only slightly (less than 20%) higher than the current market price for Zn. For the remaining Zn resources production costs are between 1.5 and 4 times (7900 t/a Zn) and 10-80 times (55,300 t/a Zn) higher than the current market value. The economic potential for Zn recovery from waste incineration residues is highest for filter ashes generated at grate incinerators equipped with wet air pollution control. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Incineration with energy recovery

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, T.G.

    1986-02-01

    Motherwell Bridge Tacol Ltd. operate a 'Licence Agreement' with Deutsche Babcock Anlagen of Krefeld, West Germany, for the construction of Municipal Refuse Incineration plant and Industrial Waste plant with or without the incorporation of waste heat recovery equipment. The construction in the UK of a number of large incineration plants incorporating the roller grate incinerator unit is discussed. The historical background, combustion process, capacity, grate details, refuse analysis and use as fuel, heat recovery and costs are outlined.

  6. Precious Metals Recovery from Electroplating Wastewater: A Review

    Science.gov (United States)

    Azmi, A. A.; Jai, J.; Zamanhuri, N. A.; Yahya, A.

    2018-05-01

    Metal bearing electroplating wastewater posts great health and environmental concerns, but could also provide opportunities for precious and valuable metal recovery, which can make the treatment process more cost-effective and sustainable. Current conventional electroplating wastewater treatment and metal recovery methods include chemical precipitation, coagulation and flocculation, ion exchange, membrane filtration, adsorption, electrochemical treatment and photocatalysis. However, these physico-chemical methods have several disadvantages such as high initial capital cost, high operational cost due to expensive chemical reagents and electricity supply, generation of metal complexes sludge which requires further treatment, ineffective in diluted and/or concentrated wastewater, low precious metal selectivity, and slow recovery process. On the other hand, metal bio-reduction assisted by bioactive phytochemical compounds extracted from plants and plant parts is a new found technology explored by several researchers in recent years aiming to recover precious and valuable metals from secondary sources mainly industrial wastewater by utilizing low-cost and eco-friendly biomaterials as reagents. Extract of plants contains polyphenolic compounds which have great antioxidant properties and reducing capacities, able to reduce metal ions into zerovalent metal atoms and stabilize the metal particles formed. This green bio-recovery method has a value added in their end products since the metals are recovered in nano-sized particles which are more valuable and have high commercial demand in other fields ranging from electrochemistry to medicine.

  7. The impact of cost recovery and sharing system on water policy implementation and human right to water: a case of Ileje, Tanzania.

    Science.gov (United States)

    Kibassa, Deusdedit

    2011-01-01

    In Tanzania, the National Water Policy (NAWAPO) of 2002 clearly stipulates that access to water supply and sanitation is a right for every Tanzanian and that cost recovery is the foundation of sustainable service delivery. To meet these demands, water authorities have introduced cost recovery and a water sharing system. The overall objective of this study was to assess the impact of cost recovery and the sharing system on water policy implementation and human rights to water in four villages in the Ileje district. The specific objectives were: (1) to assess the impact of cost recovery and the sharing system on the availability of water to the poor, (2) to assess user willingness to pay for the services provided, (3) to assess community understanding on the issue of water as a human right, (4) to analyse the implications of the results in relation to policies on human rights to water and the effectiveness of the implementation of the national water policy at the grassroots, and (5) to establish the guidelines for water pricing in rural areas. Questionnaires at water demand, water supply, ability and willingness to pay and revenue collection were the basis for data collection. While 36.7% of the population in the district had water supply coverage, more than 73,077 people of the total population of 115,996 still lacked access to clean and safe water and sanitation services in the Ileje district. The country's rural water supply coverage is 49%. Seventy-nine percent of the interviewees in all four villages said that water availability in litres per household per day had decreased mainly due to high water pricing which did not consider the income of villagers. On the other hand, more than 85% of the villagers were not satisfied with the amount they were paying because the services were still poor. On the issue of human rights to water, more than 92% of the villagers know about their right to water and want it exercised by the government. In all four villages, more than

  8. Phosphorus recovery from municipal wastewater: An integrated comparative technological, environmental and economic assessment of P recovery technologies.

    Science.gov (United States)

    Egle, L; Rechberger, H; Krampe, J; Zessner, M

    2016-11-15

    Phosphorus (P) is an essential and limited resource. Municipal wastewater is a promising source of P via reuse and could be used to replace P derived from phosphate rocks. The agricultural use of sewage sludge is restricted by legislation or is not practiced in several European countries due to environmental risks posed by organic micropollutants and pathogens. Several technologies have been developed in recent years to recover wastewater P. However, these technologies target different P-containing flows in wastewater treatment plants (effluent, digester supernatant, sewage sludge, and sewage sludge ash), use diverse engineering approaches and differ greatly with respect to P recycling rate, potential of removing or destroying pollutants, product quality, environmental impact and cost. This work compares 19 relevant P recovery technologies by considering their relationships with existing wastewater and sludge treatment systems. A combination of different methods, such as material flow analysis, damage units, reference soil method, annuity method, integrated cost calculation and a literature study on solubility, fertilizing effects and handling of recovered materials, is used to evaluate the different technologies with respect to technical, ecological and economic aspects. With regard to the manifold origins of data an uncertainty concept considering validity of data sources is applied. This analysis revealed that recovery from flows with dissolved P produces clean and plant-available materials. These techniques may even be beneficial from economic and technical perspectives under specific circumstances. However, the recovery rates (a maximum of 25%) relative to the wastewater treatment plant influent are relatively low. The approaches that recover P from sewage sludge apply complex technologies and generally achieve effective removal of heavy metals at moderate recovery rates (~40-50% relative to the WWTP input) and comparatively high costs. Sewage sludge ash is

  9. Cost competitive “soft sensor” for determining product recovery in industrial methanol

    DEFF Research Database (Denmark)

    S.B.A. Udugama, Isuru; Mansouri, Seyed Soheil; Huusom, Jakob Kjøbsted

    2017-01-01

    The measurement of ratio of product recovery in industrial methanol distillation is of high economic importance and represent a key performance index (KPI) of the distillation unit. In current operations, the product recovery of many industrial distillation units are not actively monitored, instead...

  10. Strontium-90 and promethium-147 recovery

    International Nuclear Information System (INIS)

    Hoisington, J.E.; McDonell, W.R.

    1982-01-01

    Strontium-90 and promethium-147 are fission product radionuclides with potential for use as heat source materials in high reliability, non-interruptible power supplies. Interest has recently been expressed in their utilization for Department of Defense (DOD) applications. This memorandum summarizes the current inventories, the annual production rates, and the possible recovery of Sr-90 and Pm-147 from nuclear materials production operations at Hanford and Savannah River. Recovery of these isotopes from LWR spend fuel utilizing the Barnwell Nuclear Fuels Plant (BNFP) is also considered. Unit recovery costs at each site are provided

  11. Enhanced Recovery in Thoracic Surgery: A Review

    Directory of Open Access Journals (Sweden)

    Vesna D. Dinic

    2018-02-01

    Full Text Available The main goal of enhanced recovery program after thoracic surgery is to minimize stress response, reduce postoperative pulmonary complications, and improve patient outcome, which will in addition decrease hospital stay and reduce hospital costs. As minimally invasive technique, video-assisted thoracoscopic surgery represents an important element of enhanced recovery program in thoracic surgery. Anesthetic management during preoperative, intraoperative and postoperative period is essential for the enhanced recovery. In the era of enhanced recovery protocols, non-intubated thoracoscopic procedures present a step forward. This article focuses on the key elements of the enhanced recovery program in thoracic surgery. Having reviewed recent literature, the authors highlight potential procedures and techniques that might be incorporated into the program.

  12. Podoconiosis patients’ willingness to pay for treatment services in Northwest Ethiopia: potential for cost recovery

    Science.gov (United States)

    2014-01-01

    Background Podoconiosis is non-filarial elephantiasis of the lower legs. It is more commonly found in tropical Africa, Central and South America, and northwest India. In Ethiopia, a few non-governmental organizations provide free treatment to podoconiosis patients, but sustainability of free treatment and scale-up of services to reach the huge unmet need is challenged by resource limitations. We aimed to determine podoconiosis patient’s willingness to pay (WTP) for a treatment package (composed of deep cleaning of limbs with diluted antiseptic solution, soap, and water, bandaging, application of emollient on the skin, and provision of shoes), and factors associated with WTP in northwestern Ethiopia. Methods A cross-sectional study was conducted among randomly selected untreated podoconiosis patients (n = 393) in Baso Liben woreda, northwestern Ethiopia. The contingent valuation method was used with a pre-tested interviewer-administered questionnaire. Results The majority of podoconiosis patients (72.8%) were willing to pay for treatment services. The median WTP amount was 64 Birr (US$ 3.28) per person per year. More than one-third of patients (36.7%) were willing to pay at least half of the full treatment cost and 76.2% were willing to pay at least half of the cost of shoes. A multivariate analysis showed that having a higher monthly income, being a woman, older age, being aware of the role of shoes to prevent podoconiosis, and possession of a functional radio were significantly associated with higher odds of WTP. Conclusions The considerable WTP estimates showed that podoconiosis treatment could improve sustainability and service utilization. A subsidized cost recovery scheme could reduce treatment costs and more feasibility integrate podoconiosis treatment service with other NTDs and the government’s primary health care system. PMID:24642085

  13. Double-Shell Tanks System Maintenance and Recovery Needs Report

    International Nuclear Information System (INIS)

    SMITH, D.F.

    2002-01-01

    This report represents an initial effort to identify maintenance equipment needed to support critical components used for delivery of waste feed to the Waste Isolation and Treatment Plant (WTP). Rough estimates of cost benefits for selected maintenance capabilities are provided. A follow-on to this report should include a detailed cost analysis showing cost benefits and tradeoffs in selection and development of specific maintenance capabilities. Critical component failures during delivery of waste feed from the DSTs to the WTP have the potential to idle WTP facilities if the duration of the recovery operations are long enough to allow the WTP to exhaust a planned 60-day lag storage capacity for waste feed. If a critical component within the transfer route fails, current planning does not provide for an alternative HLW feed source. Critical components with relatively high failure frequencies and recovery times are identified, along with a summary of documentation regarding historical maintenance and recovery operations and planning. Components, such as mixer pumps and transfer pumps, are estimated to have relatively long recovery times due, in part, to the current practice of sending spare pumps, when needed, off-site to a remote location, for vendor refurbishment and testing prior to installation in a tank. No capability is provided on-site for pump ''run-in''. As neither the spare pumps in storage, installed pumps, or other critical components are subjected to periodic preventive maintenance, and these critical components are planned to be operated intermittently over a long period of time, component failures are to be expected. Recommendations are made for further analysis to identify specific equipment cost benefits, development costs, and tradeoffs in selection of alternatives. This new equipment will provide capabilities for component storage and maintenance in line with vendor recommendations, reduce the duration of recovery operations, and support personnel

  14. The economics of aquifer storage recovery technology

    Energy Technology Data Exchange (ETDEWEB)

    David, R.; Pyne, G.

    2014-10-01

    Aquifer storage recovery (ASR) technology is increasingly being utilized around the world for storing water underground through one or more wells during wet months and other times when water is available for storage. The water is then recovered from the same wells when needed to meet a growing variety of water supply objectives. The economics of ASR constitute the principal reason for its increasing utilization. ASR unit capital costs are typically less than half those of other water supply and water storage alternatives. Unit operating costs are usually only slightly greater than for conventional production well-fields. Marginal costs for ASR storage and recovery provide a powerful tool for making more efficient use of existing infrastructure, providing water supply sustainability and reliability at relatively low cost. The opportunity exists for a careful analysis of the net present value of ASR well-fields, addressing not only the associated capital and operating costs but also the value of the benefits achieved for each of the water supply objectives at each site. (Author)

  15. The economics of aquifer storage recovery technology

    International Nuclear Information System (INIS)

    David, R.; Pyne, G.

    2014-01-01

    Aquifer storage recovery (ASR) technology is increasingly being utilized around the world for storing water underground through one or more wells during wet months and other times when water is available for storage. The water is then recovered from the same wells when needed to meet a growing variety of water supply objectives. The economics of ASR constitute the principal reason for its increasing utilization. ASR unit capital costs are typically less than half those of other water supply and water storage alternatives. Unit operating costs are usually only slightly greater than for conventional production well-fields. Marginal costs for ASR storage and recovery provide a powerful tool for making more efficient use of existing infrastructure, providing water supply sustainability and reliability at relatively low cost. The opportunity exists for a careful analysis of the net present value of ASR well-fields, addressing not only the associated capital and operating costs but also the value of the benefits achieved for each of the water supply objectives at each site. (Author)

  16. The Vessel Schedule Recovery Problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Plum, Christian Edinger Munk; Vaaben, Bo

    Maritime transportation is the backbone of world trade and is accountable for around 3% of the worlds CO2 emissions. We present the Vessel Schedule Recovery Problem (VSRP) to evaluate a given disruption scenario and to select a recovery action balancing the trade off between increased bunker cons...... consumption and the impact on the remaining network and the customer service level. The model is applied to 4 real cases from Maersk Line. Solutions are comparable or superior to those chosen by operations managers. Cost savings of up to 58% may be achieved.......Maritime transportation is the backbone of world trade and is accountable for around 3% of the worlds CO2 emissions. We present the Vessel Schedule Recovery Problem (VSRP) to evaluate a given disruption scenario and to select a recovery action balancing the trade off between increased bunker...

  17. Recovery of energy in a gaseous diffusion plant

    International Nuclear Information System (INIS)

    Ergalant, Jacques; Guais, J.-C.; Perrault, Michel; Vignet, Paul

    1975-01-01

    Any energy recovery, even partial, goes in the direction of savings in energy and should be sought for. The Tricastin plant, now in the course of being built, will be able to deliver several hundreds of MW for the purpose of urban and agricultural heating. The new Coredif project will more completely integrate the valorization of calories in its definition (choice of temperatures, design of the heat exchangers, recovery cycles). In fact the recent evolution in energy costs renders the otpimization of a plant equipped with a heat recovery system (1 to 2% on the cost of the uranium produced) now economically worth-while. In the same way, the choice of the site of the future plant may be conditioned by the possible uses of calories in its vicinity [fr

  18. Enhanced Recovery Pathways for Improving Outcomes After Minimally Invasive Gynecologic Oncology Surgery.

    Science.gov (United States)

    Chapman, Jocelyn S; Roddy, Erika; Ueda, Stefanie; Brooks, Rebecca; Chen, Lee-Lynn; Chen, Lee-May

    2016-07-01

    To estimate whether an enhanced recovery after surgery pathway facilitates early recovery and discharge in gynecologic oncology patients undergoing minimally invasive surgery. This was a retrospective case-control study. Consecutive gynecologic oncology patients undergoing laparoscopic or robotic surgery between July 1 and November 5, 2014, were treated on an enhanced recovery pathway. Enhanced recovery pathway components included patient education, multimodal analgesia, opioid minimization, nausea prophylaxis as well as early catheter removal, ambulation, and feeding. Cases were matched in a one-to-two ratio with historical control patients on the basis of surgery type and age. Primary endpoints were length of hospital stay, rates of discharge by noon, 30-day hospital readmission rates, and hospital costs. There were 165 patients included in the final cohort, 55 of whom were enhanced recovery pathway patients. Enhanced recovery patients were more likely to be discharged on postoperative day 1 compared with patients in the control group (91% compared with 60%, Pcontrol patients (P=.03). Postoperative pain scores decreased (2.6 compared with 3.12, P=.03) despite a 30% reduction in opioid use. Average total hospital costs were decreased by 12% in the enhanced recovery group ($13,771 compared with $15,649, P=.01). Readmission rates, mortality, and reoperation rates did not differ between the two groups. An enhanced recovery pathway in patients undergoing gynecologic oncology minimally invasive surgery is associated with significant improvements in recovery time, decreased pain despite reduced opioid use, and overall lower hospital costs.

  19. Incentive pricing and cost recovery at the basin scale.

    Science.gov (United States)

    Ward, Frank A; Pulido-Velazquez, Manuel

    2009-01-01

    Incentive pricing programs have potential to promote economically efficient water use patterns and provide a revenue source to compensate for environmental damages. However, incentive pricing may impose disproportionate costs and aggravate poverty where high prices are levied for basic human needs. This paper presents an analysis of a two-tiered water pricing system that sets a low price for subsistence needs, while charging a price equal to marginal cost, including environmental cost, for discretionary uses. This pricing arrangement can promote efficient and sustainable water use patterns, goals set by the European Water Framework Directive, while meeting subsistence needs of poor households. Using data from the Rio Grande Basin of North America, a dynamic nonlinear program, maximizes the basin's total net economic and environmental benefits subject to several hydrological and institutional constraints. Supply costs, environmental costs, and resource costs are integrated in a model of a river basin's hydrology, economics, and institutions. Three programs are compared: (1) Law of the River, in which water allocations and prices are determined by rules governing water transfers; (2) marginal cost pricing, in which households pay the full marginal cost of supplying treated water; (3) two-tiered pricing, in which households' subsistence water needs are priced cheaply, while discretionary uses are priced at efficient levels. Compared to the Law of the River and marginal cost pricing, two-tiered pricing performs well for efficiency and adequately for sustainability and equity. Findings provide a general framework for formulating water pricing programs that promote economically and environmentally efficient water use programs while also addressing other policy goals.

  20. Changes in Federal Water Project Repayment Policies Can Reduce Federal Costs.

    Science.gov (United States)

    1981-08-07

    a reimburs - able purpose, the users should share in cost recovery. RECOMMENDATIONS To provide for equitable cost reimbursement on underutilized...Department of the Interior’s Bureau of Reclamation that do not ensure fair and timely recovery of water projects’ reimbursable costs. We made this...such costs for reimbursable project purposes and considering them in future water price determinations, agencies often reas- signed them to

  1. Resource recovery. A report for the Royal Commission of Environmental Pollution

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    A report for the Royal Commission on Environmental Pollution describes the key factors influencing the level of resource recovery in the UK and compares the level in other European countries and the US. Aspects covered include waste paper, oils and batteries, cost allocation, waste disposal cost and charges, separation of waste streams and energy from waste. Finally the report identifies a number of specific areas where action might be taken to increase resource recovery. (UK).

  2. Simple Recovery of Intracellular Gold Nanoparticles from Peanut Seedling Roots.

    Science.gov (United States)

    Raju, D; Mehta, Urmil J; Ahmad, Absar

    2015-02-01

    Fabrication of inorganic nanomaterials via a biological route witnesses the formation either extracellularly, intracellulary or both. Whereas extracellular formation of these nanomaterials is cherished owing to their easy and economical extraction and purification processes; the intracellular formation of nanomaterials, due to the lack of a proper recovery protocol has always been dreaded, as the extraction processes used so far were tedious, costly, time consuming and often resulting in very low recovery. The aim of the present study was to overcome the problems related with the extraction and recovery of intracellularly synthesized inorganic nanoparticles, and to devise a method to increasing the output, the shape, size, composition and dispersal of nanoparticles is not altered. Water proved to be much better system as it provided well dispersed, stable gold nanoparticles and higher recovery. This is the first report, where intracellular nanoparticles have been recovered using a very cost-effective and eco-friendly approach.

  3. Cost Effective Surfactant Formulations for Improved Oil Recovery in Carbonate Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    William A. Goddard; Yongchun Tang; Patrick Shuler; Mario Blanco; Yongfu Wu

    2007-09-30

    This report summarizes work during the 30 month time period of this project. This was planned originally for 3-years duration, but due to its financial limitations, DOE halted funding after 2 years. The California Institute of Technology continued working on this project for an additional 6 months based on a no-cost extension granted by DOE. The objective of this project is to improve the performance of aqueous phase formulations that are designed to increase oil recovery from fractured, oil-wet carbonate reservoir rock. This process works by increasing the rate and extent of aqueous phase imbibition into the matrix blocks in the reservoir and thereby displacing crude oil normally not recovered in a conventional waterflood operation. The project had three major components: (1) developing methods for the rapid screening of surfactant formulations towards identifying candidates suitable for more detailed evaluation, (2) more fundamental studies to relate the chemical structure of acid components of an oil and surfactants in aqueous solution as relates to their tendency to wet a carbonate surface by oil or water, and (3) a more applied study where aqueous solutions of different commercial surfactants are examined for their ability to recover a West Texas crude oil from a limestone core via an imbibition process. The first item, regarding rapid screening methods for suitable surfactants has been summarized as a Topical Report. One promising surfactant screening protocol is based on the ability of a surfactant solution to remove aged crude oil that coats a clear calcite crystal (Iceland Spar). Good surfactant candidate solutions remove the most oil the quickest from the surface of these chips, plus change the apparent contact angle of the remaining oil droplets on the surface that thereby indicate increased water-wetting. The other fast surfactant screening method is based on the flotation behavior of powdered calcite in water. In this test protocol, first the calcite

  4. The economics of recovery after pancreatic surgery: detailed cost minimization analysis of an enhanced recovery program.

    Science.gov (United States)

    Kagedan, Daniel J; Devitt, Katharine S; Tremblay St-Germain, Amélie; Ramjaun, Aliya; Cleary, Sean P; Wei, Alice C

    2017-11-01

    Clinical pathways (CPW) are considered safe and effective at decreasing postoperative length of stay (LoS), but the effect on economic costs is uncertain. This study sought to elucidate the effect of a CPW on direct hospitalization costs for patients undergoing pancreaticoduodenectomy (PD). A CPW for PD patients at a single Canadian institution was implemented. Outcomes included LoS, 30-day readmissions, and direct costs of hospital care. A retrospective cost minimization analysis compared patients undergoing PD prior to and following CPW implementation, using a bootstrapped t test and deviation-based cost modeling. 121 patients undergoing PD after CPW implementation were compared to 74 controls. Index LoS was decreased following CPW implementation (9 vs. 11 days, p = 0.005), as was total LoS (10 vs. 11 days, p = 0.003). The mean total cost of postoperative hospitalization per patient decreased in the CPW group ($15,678.45 CAD vs. $25,732.85 CAD, p = 0.024), as was the mean 30-day cost including readmissions ($16,627.15 CAD vs. $29,872.72 CAD, p = 0.016). Areas of significant cost savings included laboratory tests and imaging investigations. CPWs may generate cost savings by reducing unnecessary investigations, and improve quality of care through process standardization and decreasing practice variation. Copyright © 2017 International Hepato-Pancreato-Biliary Association Inc. Published by Elsevier Ltd. All rights reserved.

  5. Recovery and use of fission product noble metals

    International Nuclear Information System (INIS)

    Jensen, G.A.; Rohmann, C.A.; Perrigo, L.D.

    1980-06-01

    Noble metals in fission products are of strategic value. Market prices for noble metals are rising more rapidly than recovery costs. A promising concept has been developed for recovery of noble metals from fission product waste. Although the assessment was made only for the three noble metal fission products (Rh, Pd, Ru), there are other fission products and actinides which have potential value

  6. Community financing of local ivermectin distribution in Nigeria: potential payment and cost-recovery outlook.

    Science.gov (United States)

    Onwujekwe, O E; Shu, E N; Okonkwo, P O

    2000-04-01

    The preferred payment mechanism in a community financing scheme for local ivermectin distribution was elicited from randomly selected household heads from three communities in Nigeria using interviewer-administered structured questionnaires. The majority of the respondents in the three communities were prepared to pay for local ivermectin distribution. Additionally, the average amounts the respondents were prepared to pay per person treated ($0.28, $0.30 and $0.38 in Nike, Achi and Toro, respectively) were all more than the $0.20 ceiling recommended by the partners of the African Programme on Onchocerciasis Control (APOC). Thus, the cost-recovery outlook is bright in these communities. However, the preferred payment modality varied. Fee-for-service was the predominant payment modality in the Achi and Nike communities, while the Toro community preferred pre-payment. This study demonstrates that many communities have different payment preferences for endemic disease control efforts. This knowledge will help in developing acceptable and sustainable schemes. The imposition of unacceptable payment mechanisms will lead to an unwillingness to pay.

  7. Tax incentives and enhanced oil recovery techniques

    International Nuclear Information System (INIS)

    Stathis, J.S.

    1991-05-01

    Tax expenditures-reductions in income tax liability resulting from a special tax provision-are often used to achieve economic and social objectives. The arguments for petroleum production tax incentives usually encompass some combination of enhancing energy security, rewarding risk, or generating additional investment in new technologies. Generally, however, some portion of any tax expenditure is spend on activities that would have occurred anyway. This paper is a review of tax incentives for petroleum production found two to be of questionable merit. Others, including tax preferences for enhanced oil recovery methods, which offered the potential for better returns on the tax dollar. Increased use of enhanced oil recovery techniques could lead to additional environmental costs, however, and these need to be factored into any cost-benefit calculation

  8. Inherently safe in situ uranium recovery

    International Nuclear Information System (INIS)

    Krumhansl, James Lee; Beauheim, Richard Louis; Brady, Patrick Vane; Arnold, Bill Walter; Kanney, Joseph F.; McKenna, Sean Andrew

    2009-01-01

    Expansion of uranium mining in the United States is a concern to some environmental groups and sovereign Native American Nations. An approach which may alleviate some problems is to develop inherently safe in situ uranium recovery ('ISR') technologies. Current ISR technology relies on chemical extraction of trace levels of uranium from aquifers that, once mined, can still contain dissolved uranium and other trace metals that are a health concern. Existing ISR operations are few in number; however, high uranium prices are driving the industry to consider expanding operations nation-wide. Environmental concerns and enforcement of the new 30 ppb uranium drinking water standard may make opening new mining operations more difficult and costly. Here we propose a technological fix: the development of inherently safe in situ recovery (ISISR) methods. The four central features of an ISISR approach are: (1) New 'green' leachants that break down predictably in the subsurface, leaving uranium, and associated trace metals, in an immobile form; (2) Post-leachant uranium/metals-immobilizing washes that provide a backup decontamination process; (3) An optimized well-field design that increases uranium recovery efficiency and minimizes excursions of contaminated water; and (4) A combined hydrologic/geochemical protocol for designing low-cost post-extraction long-term monitoring. ISISR would bring larger amounts of uranium to the surface, leave fewer toxic metals in the aquifer, and cost less to monitor safely - thus providing a 'win-win-win' solution to all stakeholders.

  9. Impediments to the success of management actions for species recovery.

    Directory of Open Access Journals (Sweden)

    Chooi Fei Ng

    Full Text Available Finding cost-effective management strategies to recover species declining due to multiple threats is challenging, especially when there are limited resources. Recent studies offer insights into how costs and threats can influence the best choice of management actions. However, when implementing management actions in the real-world, a range of impediments to management success often exist that can be driven by social, technological and land-use factors. These impediments may limit the extent to which we can achieve recovery objectives and influence the optimal choice of management actions. Nonetheless, the implications of these impediments are not well understood, especially for recovery planning involving multiple actions. We used decision theory to assess the impact of these types of impediments for allocating resources among recovery actions to mitigate multiple threats. We applied this to a declining koala (Phascolarctos cinereus population threatened by habitat loss, vehicle collisions, dog attacks and disease. We found that the unwillingness of dog owners to restrain their dogs at night (a social impediment, the effectiveness of wildlife crossings to reduce vehicle collisions (a technological impediment and the unavailability of areas for restoration (a land-use impediment significantly reduced the effectiveness of our actions. In the presence of these impediments, achieving successful recovery may be unlikely. Further, these impediments influenced the optimal choice of recovery actions, but the extent to which this was true depended on the target koala population growth rate. Given that species recovery is an important strategy for preserving biodiversity, it is critical that we consider how impediments to the success of recovery actions modify our choice of actions. In some cases, it may also be worth considering whether investing in reducing or removing impediments may be a cost-effective course of action.

  10. A Mixed Bi-level Model to Correspond Service Recovery Chain

    OpenAIRE

    Abdolalipour, Amirhossein; Nazemi, Jamshid; Eshlaghi, Abbas Toloie; Lotfi, Farhad Hosseinzadeh

    2017-01-01

    In the competitive environment, minimizing time space between service failure perception and service recovery with lowest cost is one of fast responsiveness company’s requirements. In this article, modeling service failure response time is considered. It was not only service recovery chain profit optimization carefully planned but also satisfaction of consumers who disturbed by a service failure was considered profoundly. Inconsistency between optimization of service recovery chain’s total be...

  11. Selection and application of effective LNAPL recovery techniques

    International Nuclear Information System (INIS)

    Fulton, D.E.

    1996-01-01

    The accumulation of light non-aqueous phase liquids (LNAPL) such as gasoline, diesel, fuel oil and lubricating oil resulting from historical or catastrophic releases, is present at numerous industrial and hazardous waste sites. Initiating LNAPL removal is the first step in remediating impacted groundwater with the LNAPL recovery process having a profound effect on the ability to cost effectively achieve site closure. In many cases, LNAPL recovery precedes full-scale groundwater design activities or even final site characterization due to regulatory compliance issues. Therefore, the timely and effective implementation of a LNAPL recovery system can result in reduced project costs by mitigating further plume migration, achieving maximum volume of recoverable hydrocarbons, eliminating the source area associated with dissolved phase contamination, and allowing comprehensive groundwater remediation to be employed sooner. Effective LNAPL recovery systems begin with evaluating a number of site-specific parameters to quantify the physical characteristics of the type of LNAPL to be recovered, the hydrogeological environment, LNAPL, plume geometry, and the specified client or regulatory cleanup goals. These parameters are discussed along with their significance in developing a conceptual understanding of the site

  12. Recovery of light nonaqueous-phase liquids without groundwater pumping

    International Nuclear Information System (INIS)

    Markley, D.E.; Prince-Larsen, N.

    1995-01-01

    This paper outlines recovery of light nonaqueous-phase liquids (LNAPL) encountered in the subsurface at a remote natural gas facility. Remediation of LNAPL in the subsurface usually begins with dual pumping of LNAPL and groundwater. However, regulations required that only LNAPL be recovered. Methods were sought for recovering LNAPL from groundwater without pumping groundwater to the surface. Alternative methods of LNAPL recovery, using a variety of skimming pumps, included: LNAPL recovery from large-diameter wells; LNAPL recovery from trenches; LNAPL recovery from small-diameter wells; and vacuum-enhanced recovery of LNAPL while skimming with a belt skimmer. Based on the goals of the site owner and the costs associated with each alternative examined, the recommended method for recovering LNAPL without groundwater pumping was recovery of LNAPL while skimming with a belt skimmer. This paper discusses both the advantages and limitations of this technique

  13. Platforms for energy and nutrient recovery from domestic wastewater: A review.

    Science.gov (United States)

    Batstone, D J; Hülsen, T; Mehta, C M; Keller, J

    2015-12-01

    Alternative domestic wastewater treatment processes that recover energy and nutrients while achieving acceptable nutrient limits (650mgCODL(-1). PRR offers the possibility for recovery of nitrogen and other nutrients (including potassium) through assimilative recovery. However, the energetic overhead of this is substantial, requiring 5kWhkgN(-1) as electricity, which compares to ammonia fixation costs. The lower energy costs, and near to market status of LEM treatment make it likely as a recovery platform in the shorter term, while ability to recover other elements such as nitrogen and potassium, as well as enhance favourability on concentrated wastewaters may enhance the desirability of partitioning in the longer term. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. CLINSULF sub-dew-point process for sulphur recovery

    Energy Technology Data Exchange (ETDEWEB)

    Heisel, M.; Marold, F.

    1988-01-01

    In a 2-reactor system, the CLINSULF process allows very high sulphur recovery rates. When operated at 100/sup 0/C at the outlet, i.e. below the sulphur solidification point, a sulphur recovery rate of more than 99.2% was achieved in a 2-reactor series. Assuming a 70% sulphur recovery in an upstream Claus furnace plus sulphur condenser, an overall sulphur recovery of more than 99.8% results for the 2-reactor system. This is approximately 2% higher than in conventional Claus plus SDP units, which mostly consist of 4 reactors or more. This means the the CLINSULF SSP process promises to be an improvement both in respect of efficiency and low investment cost.

  15. Nuclear plant cancellations: causes, costs, and consequences

    International Nuclear Information System (INIS)

    1983-04-01

    This study was commissioned in order to help quantify the effects of nuclear plant cancellations on the Nation's electricity prices. This report presents a historical overview of nuclear plant cancellations through 1982, the costs associated with those cancellations, and the reasons that the projects were terminated. A survey is presented of the precedents for regulatory treatment of the costs, the specific methods of cost recovery that were adopted, and the impacts of these decisions upon ratepayers, utility stockholders, and taxpayers. Finally, the report identifies a series of other nuclear plants that remain at risk of canellation in the future, principally as a result of similar demand, finance, or regulatory problems cited as causes of cancellation in the past. The costs associated with these potential cancellations are estimated, along with their regional distributions, and likely methods of cost recovery are suggested

  16. Life-Cycle Cost and Environmental Assessment of Decentralized Nitrogen Recovery Using Ion Exchange from Source-Separated Urine through Spatial Modeling.

    Science.gov (United States)

    Kavvada, Olga; Tarpeh, William A; Horvath, Arpad; Nelson, Kara L

    2017-11-07

    Nitrogen standards for discharge of wastewater effluent into aquatic bodies are becoming more stringent, requiring some treatment plants to reduce effluent nitrogen concentrations. This study aimed to assess, from a life-cycle perspective, an innovative decentralized approach to nitrogen recovery: ion exchange of source-separated urine. We modeled an approach in which nitrogen from urine at individual buildings is sorbed onto resins, then transported by truck to regeneration and fertilizer production facilities. To provide insight into impacts from transportation, we enhanced the traditional economic and environmental assessment approach by combining spatial analysis, system-scale evaluation, and detailed last-mile logistics modeling using the city of San Francisco as an illustrative case study. The major contributor to energy intensity and greenhouse gas (GHG) emissions was the production of sulfuric acid to regenerate resins, rather than transportation. Energy and GHG emissions were not significantly sensitive to the number of regeneration facilities. Cost, however, increased with decentralization as rental costs per unit area are higher for smaller areas. The metrics assessed (unit energy, GHG emissions, and cost) were not significantly influenced by facility location in this high-density urban area. We determined that this decentralized approach has lower cost, unit energy, and GHG emissions than centralized nitrogen management via nitrification-denitrification if fertilizer production offsets are taken into account.

  17. 24 CFR 266.656 - Recovery of costs after final claim settlement.

    Science.gov (United States)

    2010-04-01

    ... AUTHORITIES HOUSING FINANCE AGENCY RISK-SHARING PROGRAM FOR INSURED AFFORDABLE MULTIFAMILY PROJECT LOANS... project or otherwise, the total amount of such recovery shall be shared by HUD and the HFA in accordance...

  18. Multi-bits error detection and fast recovery in RISC cores

    International Nuclear Information System (INIS)

    Wang Jing; Yang Xing; Zhang Weigong; Shen Jiao; Qiu Keni; Zhao Yuanfu

    2015-01-01

    The particles-induced soft errors are a major threat to the reliability of microprocessors. Even worse, multi-bits upsets (MBUs) are ever-increased due to the rapidly shrinking feature size of the IC on a chip. Several architecture-level mechanisms have been proposed to protect microprocessors from soft errors, such as dual and triple modular redundancies (DMR and TMR). However, most of them are inefficient to combat the growing multi-bits errors or cannot well balance the critical paths delay, area and power penalty. This paper proposes a novel architecture, self-recovery dual-pipeline (SRDP), to effectively provide soft error detection and recovery with low cost for general RISC structures. We focus on the following three aspects. First, an advanced DMR pipeline is devised to detect soft error, especially MBU. Second, SEU/MBU errors can be located by enhancing self-checking logic into pipelines stage registers. Third, a recovery scheme is proposed with a recovery cost of 1 or 5 clock cycles. Our evaluation of a prototype implementation exhibits that the SRDP can successfully detect particle-induced soft errors up to 100% and recovery is nearly 95%, the other 5% will inter a specific trap. (paper)

  19. Multi-bits error detection and fast recovery in RISC cores

    Science.gov (United States)

    Jing, Wang; Xing, Yang; Yuanfu, Zhao; Weigong, Zhang; Jiao, Shen; Keni, Qiu

    2015-11-01

    The particles-induced soft errors are a major threat to the reliability of microprocessors. Even worse, multi-bits upsets (MBUs) are ever-increased due to the rapidly shrinking feature size of the IC on a chip. Several architecture-level mechanisms have been proposed to protect microprocessors from soft errors, such as dual and triple modular redundancies (DMR and TMR). However, most of them are inefficient to combat the growing multi-bits errors or cannot well balance the critical paths delay, area and power penalty. This paper proposes a novel architecture, self-recovery dual-pipeline (SRDP), to effectively provide soft error detection and recovery with low cost for general RISC structures. We focus on the following three aspects. First, an advanced DMR pipeline is devised to detect soft error, especially MBU. Second, SEU/MBU errors can be located by enhancing self-checking logic into pipelines stage registers. Third, a recovery scheme is proposed with a recovery cost of 1 or 5 clock cycles. Our evaluation of a prototype implementation exhibits that the SRDP can successfully detect particle-induced soft errors up to 100% and recovery is nearly 95%, the other 5% will inter a specific trap.

  20. Disaster recovery: mitigating loss through documentation.

    Science.gov (United States)

    Boisvert, Sue

    2011-01-01

    Flood, fire, tornado, hurricane. Whatever the cause, natural or man-made, the result on an organization can be devastating. Planning and preparation for disaster must include significant attention to disaster recovery. The ability to produce documentation of what existed, what was damaged, recovery costs and income losses will be essential to the claims adjustment process. This article discusses strategies for creating a historical record, leveraging contemporaneous incident command documentation and working with contractors to identify and record disaster-related expenses. © 2011 American Society for Healthcare Risk Management of the American Hospital Association.

  1. Total Value of Phosphorus Recovery.

    Science.gov (United States)

    Mayer, Brooke K; Baker, Lawrence A; Boyer, Treavor H; Drechsel, Pay; Gifford, Mac; Hanjra, Munir A; Parameswaran, Prathap; Stoltzfus, Jared; Westerhoff, Paul; Rittmann, Bruce E

    2016-07-05

    Phosphorus (P) is a critical, geographically concentrated, nonrenewable resource necessary to support global food production. In excess (e.g., due to runoff or wastewater discharges), P is also a primary cause of eutrophication. To reconcile the simultaneous shortage and overabundance of P, lost P flows must be recovered and reused, alongside improvements in P-use efficiency. While this motivation is increasingly being recognized, little P recovery is practiced today, as recovered P generally cannot compete with the relatively low cost of mined P. Therefore, P is often captured to prevent its release into the environment without beneficial recovery and reuse. However, additional incentives for P recovery emerge when accounting for the total value of P recovery. This article provides a comprehensive overview of the range of benefits of recovering P from waste streams, i.e., the total value of recovering P. This approach accounts for P products, as well as other assets that are associated with P and can be recovered in parallel, such as energy, nitrogen, metals and minerals, and water. Additionally, P recovery provides valuable services to society and the environment by protecting and improving environmental quality, enhancing efficiency of waste treatment facilities, and improving food security and social equity. The needs to make P recovery a reality are also discussed, including business models, bottlenecks, and policy and education strategies.

  2. Laboratory simulations of the mixed solvent extraction recovery of dominate polymers in electronic waste.

    Science.gov (United States)

    Zhao, Yi-Bo; Lv, Xu-Dong; Yang, Wan-Dong; Ni, Hong-Gang

    2017-11-01

    The recovery of four dominant plastics from electronic waste (e-waste) using mixed solvent extraction was studied. The target plastics included polycarbonate (PC), polystyrene (PS), acrylonitrile butadiene styrene (ABS), and styrene acrylonitrile (SAN). The extraction procedure for multi-polymers at room temperature yielded PC, PS, ABS, and SAN in acceptable recovery rates (64%, 86%, 127%, and 143%, respectively, where recovery rate is defined as the mass ratio of the recovered plastic to the added standard polymer). Fourier transform infrared spectroscopy (FTIR) was used to verify the recovered plastics' purity using a similarity analysis. The similarities ranged from 0.98 to 0.99. Another similar process, which was denoted as an alternative method for plastic recovery, was examined as well. Nonetheless, the FTIR results showed degradation may occur over time. Additionally, the recovery cost estimation model of our method was established. The recovery cost estimation indicated that a certain range of proportion of plastics in e-waste, especially with a higher proportion of PC and PS, can achieve a lower cost than virgin polymer product. It also reduced 99.6%, 30.7% and 75.8% of energy consumptions and CO 2 emissions during the recovery of PC, PS and ABS, and reduced the amount of plastic waste disposal via landfill or incineration and associated environmental impacts. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. A new helium gas recovery and purification system

    International Nuclear Information System (INIS)

    Yamamotot, T.; Suzuki, H.; Ishii, J.; Hamana, I.; Hayashi, S.; Mizutani, S.; Sanjo, S.

    1974-01-01

    A helium gas recovery and purification system, based on the principle of gas permeation through a membrane, is described. The system can be used for the purification of helium gas containing air as a contaminant. The apparatus, operating at ambient temperature does not need constant attention, the recovery ratio of helium gas is satisfactory and running costs are low. Gases other than helium can be processed with the apparatus. (U.K.)

  4. Key Recovery Using Noised Secret Sharing with Discounts over Large Clouds

    OpenAIRE

    JAJODIA , Sushil; Litwin , Witold; Schwarz , Thomas

    2013-01-01

    Encryption key loss problem is the Achilles's heel of cryptography. Key escrow helps, but favors disclosures. Schemes for recoverable encryption keys through noised secret sharing alleviate the dilemma. Key owner escrows a specifically encrypted backup. The recovery needs a large cloud. Cloud cost, money trail should rarefy illegal attempts. We now propose noised secret sharing schemes supporting discounts. The recovery request with discount code lowers the recovery complexity, easily by orde...

  5. 30 CFR 220.013 - Unallowable costs.

    Science.gov (United States)

    2010-07-01

    ...)); (c) Depreciation, depletion, amortization, or any other charge for capital recovery for materiel... employee move that is for the primary benefit of the lessee's non-NPSL operations; (h) The lessee's own cost of administering employee benefit plans; (i) The cost of acquiring or constructing shore base...

  6. Development of a Field Demonstration for Cost-Effective Low-Grade Heat Recovery and Use Technology Designed to Improve Efficiency and Reduce Water Usage Rates for a Coal-Fired Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Noble, Russell [Southern Company Services, Incorporated, Birmingham, AL (United States); Dombrowski, K. [AECOM Technical Services, Austin, TX (United States); Bernau, M. [AECOM Technical Services, Austin, TX (United States); Morett, D. [AECOM Technical Services, Austin, TX (United States); Maxson, A. [EPRI, Palo Alto, CA (United States); Hume, S. [EPRI, Palo Alto, CA (United States)

    2016-06-30

    Coal-based power generation systems provide reliable, low-cost power to the domestic energy sector. These systems consume large amounts of fuel and water to produce electricity and are the target of pending regulations that may require reductions in water use and improvements in thermal efficiency. While efficiency of coal-based generation has improved over time, coal power plants often do not utilize the low-grade heat contained in the flue gas and require large volumes of water for the steam cycle make-up, environmental controls, and for process cooling and heating. Low-grade heat recovery is particularly challenging for coal-fired applications, due in large part to the condensation of acid as the flue gas cools and the resulting potential corrosion of the heat recovery materials. Such systems have also not been of significant interest as recent investments on coal power plants have primarily been for environmental controls due to more stringent regulations. Also, in many regions, fuel cost is still a pass-through to the consumer, reducing the motivation for efficiency improvements. Therefore, a commercial system combining low-grade heat-recovery technologies and associated end uses to cost effectively improve efficiency and/or reduce water consumption has not yet been widely applied. However, pressures from potential new regulations and from water shortages may drive new interest, particularly in the U.S. In an effort to address this issue, the U.S. Department of Energy (DOE) has sought to identify and promote technologies to achieve this goal.

  7. Novel integrated gasification combined cycles with a carbon dioxide recovery option

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, J.

    1997-08-01

    Two novel combined cycle configurations offering potential to reduce the cost of electricity from coal-fired IGCCs were investigated - one based on the use of flue gas recycling with heat recovery to the recycled stream, the other, aimed at removing carbon dioxide, using flue gas recycle and heat recovery but with oxygen as the oxidant in the gas turbine. The investigation included the use of fuels other than coal. It was found that gasification efficiency was increased by use of a coal/Orimulsion slurry. Flue gas recycling at 1 bar for the industrial gas turbine offered a gain of about 0.4 percentage points. In a standard IGCC the industrial gas turbine showed an advantage of 1.5 percentage points over the aero-derived machine. The least cost electricity with CO{sub 2} removal was achieved using an oxygen-fed industrial gas turbine with flue gas recycling and recovery. Several recommendations are made for further studies to reduce costs of electricity production. 11 refs., 3 figs., 5 tabs., 1 app.

  8. An economic and legal perspective on electric utility transition costs

    Energy Technology Data Exchange (ETDEWEB)

    Rose, K.

    1996-07-01

    The issue of possibly unrecoverable cost incurred by a utility, or `stranded costs,` has emerged as a major obstacle to developing a competitive generation market. Stranded or transition costs are defined as costs incurred by a utility to serve its customers that were being recovered in rates but are no longer due to availability of lower-priced alternative suppliers. The idea of `stranded cost,` and more importantly arguments for its recovery, is a concept with little basis in economic theory, legal precedence, or precedence in other deregulated industries. The main argument recovery is that the ``regulatory compact`` requires it. This is based on the misconception that the regulator compact is simply: the utility incurs costs on behalf of its customers because of the ``obligation to serve`` so, therefore, customers are obligated to pay. This is a mischaracterization of what the compact was and how it developed. Another argument is that recovery is required for economic efficiency. This presumes, however, a very narrow definition of efficiency based on preventing ``uneconomic`` bypass of the utility and that utilities minimize costs. A broader definition of efficiency and the likelihood of cost inefficiencies in the industry suggest that the cost imposed on customers from inhibiting competition could exceed the gains from preventing uneconomic bypass. Both these issues are examined in this paper.

  9. Understanding the cost bases of Space Shuttle pricing policies for commercial and foreign customers

    Science.gov (United States)

    Stone, Barbara A.

    1984-01-01

    The principles and underlying cost bases of the 1977 and 1982 Space Shuttle Reimbursement Policies are compared and contrasted. Out-of-pocket cost recovery has been chosen as the base of the price for the 1986-1988 time period. With this cost base, it is NASA's intent to recover the total cost of consumables and the launch and flight operations costs added by commercial and foreign customers over the 1986-1988 time period. Beyond 1988, NASA intends to return to its policy of full cost recovery.

  10. Process options and projected mass flows for the HTGR refabrication scrap recovery system

    International Nuclear Information System (INIS)

    Tiegs, S.M.

    1979-03-01

    The two major uranium recovery processing options reviewed are (1) internal recovery of the scrap by the refabrication system and (2) transfer to and external recovery of the scrap by the head end of the reprocessing system. Each option was reviewed with respect to equipment requirements, preparatory processing, and material accountability. Because there may be a high cost factor on transfer of scrap fuel material to the reprocessing system for recovery, all of the scrap streams will be recycled internally within the refabrication system, with the exception of reject fuel elements, which will be transferred to the head end of the reprocessing system for uranium recovery. The refabrication facility will be fully remote; thus, simple recovery techniques were selected as the reference processes for scrap recovery. Crushing, burning, and leaching methods will be used to recover uranium from the HTGR refabrication scrap fuel forms, which include particles without silicon carbide coatings, particles with silicon carbide coatings, uncarbonized fuel rods, carbon furnace parts, perchloroethylene distillation bottoms, and analytical sample remnants. Mass flows through the reference scrap recovery system were calculated for the HTGR reference recycle facility operating with the highly enriched uranium fuel cycle. Output per day from the refabrication scrap recovery system is estimated to be 4.02 kg of 2355 U and 10.85 kg of 233 U. Maximum equipment capacities were determined, and future work will be directed toward the development and costing of the scrap recovery system chosen as reference

  11. A Bridge to Recovery

    Directory of Open Access Journals (Sweden)

    Rebecca M. Loya

    2015-02-01

    Full Text Available Sexual violence can trigger adverse economic events for survivors, including increased expenses and decreased earnings. Using interview data, this exploratory study examines how access to assets (liquid assets, familial financial assistance, and homeownership affects survivors’ economic well-being during recovery. In keeping with asset theory, liquid assets and familial assistance can help offset post-assault expenses and facilitate access to services. Homeownership, meanwhile, appears to have mixed effects on survivors’ economic well-being. These findings suggest that the economic costs of sexual violence can burden survivors with fewer financial resources more heavily than those who own significant assets. As such, these findings shift the focus toward a dimension of inequality in recovery from sexual violence that is often overlooked in research and that may have implications for public policy and victim services.

  12. Nutrition for recovery in aquatic sports.

    Science.gov (United States)

    Burke, Louise M; Mujika, Iñigo

    2014-08-01

    Postexercise recovery is an important topic among aquatic athletes and involves interest in the quality, quantity, and timing of intake of food and fluids after workouts or competitive events to optimize processes such as refueling, rehydration, repair, and adaptation. Recovery processes that help to minimize the risk of illness and injury are also important but are less well documented. Recovery between workouts or competitive events may have two separate goals: (a) restoration of body losses and changes caused by the first session to restore performance for the next and (b) maximization of the adaptive responses to the stress provided by the session to gradually make the body become better at the features of exercise that are important for performance. In some cases, effective recovery occurs only when nutrients are supplied, and an early supply of nutrients may also be valuable in situations in which the period immediately after exercise provides an enhanced stimulus for recovery. This review summarizes contemporary knowledge of nutritional strategies to promote glycogen resynthesis, restoration of fluid balance, and protein synthesis after different types of exercise stimuli. It notes that some scenarios benefit from a proactive approach to recovery eating, whereas others may not need such attention. In fact, in some situations it may actually be beneficial to withhold nutritional support immediately after exercise. Each athlete should use a cost-benefit analysis of the approaches to recovery after different types of workouts or competitive events and then periodize different recovery strategies into their training or competition programs.

  13. Free product recovery at spill sites with fluctuating water tables

    International Nuclear Information System (INIS)

    Parker, J.C.; Katyal, A.K.; Zhu, J.L.; Kremesec, V.J.; Hockman, E.L.

    1992-01-01

    Spills and leaks of hydrocarbons from underground storage tanks, pipelines and other facilities pose a serious potential for groundwater contamination which can be very costly to remediate. The severity of the impacts and the cost of remediation can be reduced by various means. Lateral spreading of free phase hydrocarbons on the groundwater table can be prevented by pumping water to control the hydraulic gradient. Recovery of floating product may be performed by skimming hydrocarbons from wells, usually in combination with water pumping to increase the gradient. The environmental variables (water table gradient, water table fluctuations due to regional recovery wells, rates of water pumping)

  14. Study on Dynamic Characteristics of Microbial Enhanced Oil Recovery

    Science.gov (United States)

    Zhao, Yang; Shi, Fang; Qin, Wuying; Yan, Jing

    2018-01-01

    With the rapid development of economy, the demand for oil is increasing day by day. MEOR has the advantages of low cost and no pollution to the environment, attracted widespread attention. In this paper, the dynamic characteristics of microbial enhanced oil recovery were studied by laboratory experiments. The result showed that all the microbial flooding recovery rate could reach more than 5%, and the total recovery could reach more than 35% and if the injection period of microbial composite system was advanced, the whole oil displacement process could be shortened and the workload would be reduced.

  15. Advantage of fast reacting adsorbents like humic acids for the recovery of uranium from seawater

    International Nuclear Information System (INIS)

    Denzinger, H.; Schnell, C.; Heitkamp, D.; Wagener, K.

    1980-01-01

    This report is divided into two sections. The first part comprises experimental data of humic acid adsorbers; whereas, the second concerns design parameter and costs of a recovery plant using fast reacting adsorbents. Summarizing the experimental results, hydrogen-loaded humic acids on carriers show an exceptionally fast kinetics of uranium fixation in seawater which is practically temperature independent. This fast adsorption performance may be maintained in a technical recovery process if care is taken to minimize slow diffraction controlled steps preceding the uranium fixation reaction. When humic acid was used instead of titanium hydroxide in the recovery plant, there was a decrease of investment and production costs of about 50%. However, there was a higher percentage of energy costs, i.e., electric power consumption and investments for pumps

  16. Preliminary fee methodology for recovering GTCC-LLW management costs

    International Nuclear Information System (INIS)

    Clark, L.L.

    1990-06-01

    The US Department of Energy (DOE) is currently planning a fee to recover costs of managing Greater-Than-Class-C Low-Level Waste (GTCC-LLW). A cash flow basis will be used for fee calculations to ensure recovery of all applicable program costs. Positive cash flows are revenues received from waste generators. Negative cash flows are program expenses for storage, transportation, treatment, and disposal of the wastes and for program development, evaluation, and administration. Program balances are the net result of positive and negative cash flows each year. The methodology calculates fees that will recovery all program expenses taking into account cost inflation. 3 refs., 1 tab

  17. Marginal pricing of transmission services: An analysis of cost recovery

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Arriaga, I.J.; Rubio, F.J. [Univ. Pontificia Comillas, Madrid (Spain); Puerta, J.F.; Arceluz, J.; Marin, J. [IBERDROLA, Bilbao (Spain). Unidad de Planificacion Estrategica

    1995-02-01

    This paper presents an in-depth analysis of network revenues computed with marginal pricing, and in particular it investigates the reasons why marginal prices fail to recover the total incurred network costs in actual power systems. The basic theoretical results are presented and the major causes of the mismatch between network costs and marginal revenues are identified and illustrated with numerical examples, some tutorial and others of realistic size. The regulatory implications of marginal network pricing in the context of competitive electricity markets are analyzed, and suggestions are provided for the meaningful allocation of the costs of the network among its users.

  18. Marginal pricing of transmission services: An analysis of cost recovery

    International Nuclear Information System (INIS)

    Perez-Arriaga, I.J.; Rubio, F.J.; Puerta, J.F.; Arceluz, J.; Marin, J.

    1995-01-01

    This paper presents an in-depth analysis of network revenues computed with marginal pricing, and in particular it investigates the reasons why marginal prices fail to recover the total incurred network costs in actual power systems. The basic theoretical results are presented and the major causes of the mismatch between network costs and marginal revenues are identified and illustrated with numerical examples, some tutorial and others of realistic size. The regulatory implications of marginal network pricing in the context of competitive electricity markets are analyzed, and suggestions are provided for the meaningful allocation of the costs of the network among its users

  19. Managing the Cost of Enhanced Oil Recovery Gérer le coût de la récupération assistée

    Directory of Open Access Journals (Sweden)

    Simandoux P.

    2006-11-01

    Full Text Available The drop in crude-oil prices has caused a worldwide slowing down of the growth of enhanced-recovery activities and a recentering on less costly processes. The technical costs of implementing such methods have diminished, mainly because of the decrease in the cost of services, but insufficiently to ensure the economic viability of many projects. Therefore, today even more than yesterday, it is of prime importance to search for all ways of reducing the cost of enhanced recovery. It is thus indispensable to improve our mastery of process, the knowledge and management of reservoirs, and to use the appropriate indicators to follow the evolution of costs. Likewise, synergisms resulting from the use of horizontal drain holes at the same time as steam or polymer flooding must be systematically sought for. Lastly, only sustained activity in the field of pilot projects can enable these goals to be reached. La baisse du prix du brut a provoqué au plan mondial un ralentissement de la croissance de l'activité de la récupération assistée et un recentrage sur les procédés les moins onéreux. Les coûts techniques de mise en oeuvre de ces méthodes ont diminué, essentiellement grâce à la baisse du coût des services, mais de façon insuffisante pour assurer la viabilité économique de nombreux projets. En conséquence, aujourd'hui encore plus qu'hier, il est de première importance de rechercher toutes les voies de réduction des coûts offertes par la récupération assistée. Dans ce sens, il est indispensable d'améliorer la maîtrise des procédés, la connaissance et la gestion des réservoirs, et de suivre avec des indicateurs appropriés l'évolution des coûts. De même, les synergies résultant de l'utilisation de drains horizontaux simultanément avec une injection de vapeur ou de polymères doivent être systématiquement recherchées. Enfin, seule une activité soutenue en terme de pilotes peut permettre d'atteindre ces objectifs.

  20. THE CALCULATION OF THE ENERGY RECOVERY ELECTRIFIED URBAN TRANSPORT DURING THE INSTALLATION DRIVE FOR TRACTION SUBSTATION

    Directory of Open Access Journals (Sweden)

    A. A. Sulim

    2014-01-01

    Full Text Available At present a great attention is paid to increasing of energy efficiency at operated electrified urban transport. Perspective direction for increasing energy efficiency at that type of transport is the application of regenerative braking. For additional increasing of energy efficiency there were suggested the use of capacitive drive on tires of traction substation. One of the main task is the analysis of energy recovery application  with drive and without it.These analysis demonstrated that the calculation algorithms don’t allow in the full volume to carry out calculations of amount and cost of energy recovery without drive and with it. That is why we see the current interest to this topic. The purpose of work is to create methods of algorithms calculation for definite amount and cost of consumed, redundant and recovery energy of electrified urban transport due to definite regime of motion on wayside. There is algorithm developed, which allow to calculate amount and cost of consumed, redundant and recovery energy of electrified urban transport on wayside during the installation capacitive drive at traction substation. On the basis of developed algorithm for the definite regime of wagon motion of subway there were fulfilled the example of energy recovery amount and its cost calculation, among them with limited energy intensity drive, when there are 4 trains on wayside simultaneously.

  1. Setting-up a cost recovery system for the largest wastewater treatment plant in South-East Asia.

    Science.gov (United States)

    Lønholdt, J; Elberg Jørgensen, P; O'Hearn, D

    2005-01-01

    A tariff system has been set up for the largest wastewater treatment plant in South-East Asia, the Samut Prakarn Wastewater Treatment Plant south of Bangkok, which is currently under completion. Fully functional the plant will have a design capacity for 500,000 m3 per day and will service a combined residential and industrial area with approximately 600,000 residents and 2,300 factories. The tariff system, which includes a tariff model, is based on water consumption and BOD load. As background for setting the tariffs a comprehensive monitoring system including an industrial permitting system has been developed. The paper presents the background and rationale for setting up the system as well as the objective, scope and content of the tariff system and the industrial permit system. Further, the feasibility of introducing cost recovery systems, which is widely accepted in developing economies on the conceptual level and to some extent implemented at the legal and regulatory level, but has yet to be implemented at large, is discussed.

  2. The ways of perfection managerial accounting and cost calculation

    OpenAIRE

    Gheorghe Lepadatu

    2011-01-01

    Improvement and diversification of costing methods should consider, in addition to efficiency, foresight and responsibility, and reduce the workload necessary to obtain information on costs of production and costs, and possible recovery of the information obtained. This process requires the adoption of systems, methods and techniques of budgeting, tracking and costing, to provide efficiency, simplicity, economy and provision.

  3. Mechanical ventilation with heat recovery in arctic climate

    DEFF Research Database (Denmark)

    Kragh, Jesper; Svendsen, Svend

    2005-01-01

    Mechanical ventilations systems with highly effective heat recovery units in arctic climate have problems with condensing water from the extracted humid indoor air. If the condensing water freezes to ice in the heat recovery unit, the airflow rate will quickly diminish due to the increasing...... pressure drop. Preheating the inlet air (outdoor air) to a temperature just above 0ºC is typically used to solve the problem. To minimize the energy cost, a more efficient solution to the problem is therefore desirable. In this project a new design of a heat recovery unit has been developed to the low......-energy house in Sisimiut, which is capable of continuously defrosting itself. The disadvantage of the unit is that it is quite big compared with other units. In this paper the new heat recovery unit is described and laboratory measurements are presented showing that the unit is capable of continuously...

  4. Microbial enhanced oil recovery: Entering the log phase

    Energy Technology Data Exchange (ETDEWEB)

    Bryant, R.S.

    1995-12-31

    Microbial enhanced oil recovery (MEOR) technology has advanced internationally since 1980 from a laboratory-based evaluation of microbial processes to field applications. In order to adequately support the decline in oil production in certain areas, research on cost-effective technologies such as microbial enhanced oil recovery processes must focus on both near-term and long-term applications. Many marginal wells are desperately in need of an inexpensive improved oil recovery technology today that can assist producers in order to prevent their abandonment. Microbial enhanced waterflooding technology has also been shown to be an economically feasible technology in the United States. Complementary environmental research and development will also be required to address any potential environmental impacts of microbial processes. In 1995 at this conference, the goal is to further document and promote microbial processes for improved oil recovery and related technology for solving environmental problems.

  5. Integrating remediation and resource recovery: On the economic conditions of landfill mining

    International Nuclear Information System (INIS)

    Frändegård, Per; Krook, Joakim; Svensson, Niclas

    2015-01-01

    Highlights: • We compare two remediation scenarios; one with resource recovery and one without. • Economic analysis includes relevant direct costs and revenues for the landfill owner. • High degrees of metal and/or combustible contents are important economic factors. • Landfill tax and the access to a CHP can have a large impact on the result. • Combining landfill mining and remediation may decrease the project cost. - Abstract: This article analyzes the economic potential of integrating material separation and resource recovery into a landfill remediation project, and discusses the result and the largest impact factors. The analysis is done using a direct costs/revenues approach and the stochastic uncertainties are handled using Monte Carlo simulation. Two remediation scenarios are applied to a hypothetical landfill. One scenario includes only remediation, while the second scenario adds resource recovery to the remediation project. Moreover, the second scenario is divided into two cases, case A and B. In case A, the landfill tax needs to be paid for re-deposited material and the landfill holder does not own a combined heat and power plant (CHP), which leads to disposal costs in the form of gate fees. In case B, the landfill tax is waived on the re-deposited material and the landfill holder owns its own CHP. Results show that the remediation project in the first scenario costs about €23/ton. Adding resource recovery as in case A worsens the result to −€36/ton, while for case B the result improves to −€14/ton. This shows the importance of landfill tax and the access to a CHP. Other important factors for the result are the material composition in the landfill, the efficiency of the separation technology used, and the price of the saleable material

  6. Integrating remediation and resource recovery: On the economic conditions of landfill mining

    Energy Technology Data Exchange (ETDEWEB)

    Frändegård, Per, E-mail: per.frandegard@liu.se; Krook, Joakim; Svensson, Niclas

    2015-08-15

    Highlights: • We compare two remediation scenarios; one with resource recovery and one without. • Economic analysis includes relevant direct costs and revenues for the landfill owner. • High degrees of metal and/or combustible contents are important economic factors. • Landfill tax and the access to a CHP can have a large impact on the result. • Combining landfill mining and remediation may decrease the project cost. - Abstract: This article analyzes the economic potential of integrating material separation and resource recovery into a landfill remediation project, and discusses the result and the largest impact factors. The analysis is done using a direct costs/revenues approach and the stochastic uncertainties are handled using Monte Carlo simulation. Two remediation scenarios are applied to a hypothetical landfill. One scenario includes only remediation, while the second scenario adds resource recovery to the remediation project. Moreover, the second scenario is divided into two cases, case A and B. In case A, the landfill tax needs to be paid for re-deposited material and the landfill holder does not own a combined heat and power plant (CHP), which leads to disposal costs in the form of gate fees. In case B, the landfill tax is waived on the re-deposited material and the landfill holder owns its own CHP. Results show that the remediation project in the first scenario costs about €23/ton. Adding resource recovery as in case A worsens the result to −€36/ton, while for case B the result improves to −€14/ton. This shows the importance of landfill tax and the access to a CHP. Other important factors for the result are the material composition in the landfill, the efficiency of the separation technology used, and the price of the saleable material.

  7. Low-temperature waste-heat recovery in the food and paper industries

    Energy Technology Data Exchange (ETDEWEB)

    Foell, W.K.; Lund, D.; Mitchell, J.W.; Ray, D.; Stevenson, R.; TenWolde, A.

    1980-11-01

    The potential of low-temperature waste-heat recovery technology is examined. An examination of barriers to impede waste-heat recovery is made and research programs are identified. Extensive information and data are presented in the following chapters: Waste Heat Recovery in the Wisconsin Food Industry; Waste Heat Recovery in the Wisconsin Pulp and Paper Industry; Industries' Economic Analysis of Energy Conservation Projects; Industrial Waste Heat Recovery (selection of heat-recovery heat exchangers for industrial applications, simplified procedure for selection of heat recovery heat exchangers for industrial applications, selection of heat pumps for industrial applications); Institutional Aspects of Industrial Energy Conservation (economic motivation for energy conservation and the industrial response, intrafirm idea channels and their sources, evaluation and approval of plant improvement projects, reported barriers to adopting waste heat recovery projects and recommendations for government involvement, and the final chapter is a summary with major conclusions given. Additional information is given in two appendices on the potential waste heat recovery in a cheese plant (calculation) and conditions for optimum exchanger size and break-even fuel cost. (MCW)

  8. Optimization of Surfactant Mixtures and Their Interfacial Behavior for Advanced Oil Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Somasundaran, Prof. P.

    2001-02-27

    The goal of this report is to develop improved extraction processes to mobilize and produce the oil left untapped using conventional techniques. Current chemical schemes for recovering the residual oil have been in general less than satisfactory. High cost of the processes as well as significant loss of chemicals by adsorption on reservoir materials and precipitation has limited the utility of chemical-flooding operations. There is a need to develop cost-effective, improved reagent schemes to increase recovery from domestic oil reservoirs. The goal of the report was to develop and evaluate novel mixtures of surfactants for improved oil recovery.

  9. Conceptual process design for uranium recovery from sea water

    International Nuclear Information System (INIS)

    Suzuki, Motoyuki; Chihara, Kazuyuki; Fujimoto, Masahiko; Yagi, Hiroshi; Wada, Akihiko.

    1985-01-01

    Based on design of uranium recovery process from sea water, total cost for uranium production was estimated. Production scale of 1,000 ton-uranium per year was supposed, because of the big demand for uranium in the second age, i.e., fast breeder reactor age. The process is described as follows: Fluidized bed of hydrous titanium oxide (diameter is 0.1 mm, saturated adsorption capacity is 510 μg-U/g-Ad, adsorption capacity for ten days is 150 μg-U/g-Ad) is supposed, as an example, to be utilized as the primarily concentration unit. Fine adsorbent particles can be transferred as slurry in all of the steps of adsorption, washing, desorption, washing, regeneration. As an example, ammonium carbonate is applied to desorb the adsorbed uranium from titanium oxide. Then, stripping method is adopted for desorbent recovery. As for the secondary concentration, strong basic anion exchange method is supposed. The first step of process design is to determine the mass balance of each component through the whole process system by using the signal diagram. Then, the scale of each unit process, with which the mass balances are satisfied, is estimated by detailed chemical engineering calculation. Also, driving cost of each unit operation is estimated. As a result, minimum total cost of 160,000 yen/kg-U is obtained. Adsorption process cost is 80 to 90 % of the total cost. Capital cost and driving cost are fifty-fifty in the adsorption process cost. Pump driving cost forms a big part of the driving cost. Further concentrated study should be necessary on the adsorption process design. It might be important to make an effort on direct utilization of ocean current for saving the pump driving cost. (author)

  10. Cost recovery of congested infrastructure under market power

    NARCIS (Netherlands)

    Verhoef, Erik T.

    2017-01-01

    The Mohring–Harwitz (1962) theorem states that the degree of self-financing of congested infrastructure is equal to the elasticity of the capacity cost function in the optimum, so that under neutral scale economies exact self-financing applies. The theorem breaks down when the infrastructure is used

  11. Case study: Free product recovery and site remediation using horizontal trenching, soil vapor treatment and groundwater extraction

    International Nuclear Information System (INIS)

    Sanderson, E.P.; Johnston, H.S. Jr.; Farrell, M.; Twedell, D.B.

    1993-01-01

    Sites with soil and groundwater impacted by petroleum hydrocarbons have been remediated using a variety of traditional techniques. However, when the site impacted lies within a very confined downtown area of an expanding metropolitan city, a more complex array of technologies must be considered. The Law Enforcement Center site is the City of Charlotte's worst known underground storage tank (UST) release to date. A cost effective free product recovery, soil vapor and groundwater extraction system is being piloted here using new horizontal trenching technology and state of the art equipment. On-site low permeability soil required that an alternative to standard recovery wells be developed for groundwater recovery and vapor extraction. Operation and maintenance (O and M) of the large number of recovery wells required would have been extremely costly over the expected lifetime of the project. Although horizontal trenching was the best solution to the O and M costs, many problems were encountered during their installation

  12. Ranking oil sands bitumen recovery techniques

    Energy Technology Data Exchange (ETDEWEB)

    Lam, A.; Nobes, D.S.; Lipsett, M.G. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mechanical Engineering

    2009-07-01

    The preference ranking organization method (PROMETHEE) was used to assess and rank 3 techniques for in situ bitumen recovery: (1) steam assisted gravity drainage; (2) vapour extraction (VAPEX); and (3) toe-to-heel air injection (THAI). The study used a business scenario where management-type indicators included potential production rates; estimated overall operating costs; energy consumption; facilities requirement; recovery efficiency; and energy loss. Amounts of carbon dioxide (CO{sub 2}) emissions were also considered, as well as the production depth, formation thickness, and API gravity of the produced bitumen. The study showed that THAI recovery methods had the most beneficial criteria weighting of the 3 processes, while SAGD was the least favourable choice. However, SAGD processes are the most widely used of the 3 processes, while THAI has only been demonstrated on a limited scale. It was concluded that the maturity of a technology should be weighted more heavily when using the PROMETHEE method. 8 refs., 2 tabs.

  13. Hydropower recovery in water supply systems: Models and case study

    International Nuclear Information System (INIS)

    Vilanova, Mateus Ricardo Nogueira; Balestieri, José Antônio Perrella

    2014-01-01

    Highlights: • We present hydropower recovery models for water supply systems. • Hydropower recovery potential in water supply systems is highly variable. • The case studied could make the supply systems self-sufficient in terms of energy. • Hydropower recovery can reduce GHGs emissions and generate carbon credits. - Abstract: The energy efficiency of water supply systems can be increased through the recovery of hydraulic energy implicit to the volumes of water transported in various stages of the supply process, which can be converted into electricity through hydroelectric recovery systems. Such a process allows the use of a clean energy source that is usually neglected in water supplies, reducing its dependence on energy from the local network and the system’s operation costs. This article evaluates the possibilities and benefits of the use of water supply facilities, structures and equipment for hydraulic energy recovery, addressing several applicable hydroelectric models. A real case study was developed in Brazil to illustrate the technical, economic and environmental aspects of hydropower recovery in water supply systems

  14. Applications of thermal energy storage to waste heat recovery in the food processing industry

    Science.gov (United States)

    Wojnar, F.; Lunberg, W. L.

    1980-01-01

    A study to assess the potential for waste heat recovery in the food industry and to evaluate prospective waste heat recovery system concepts employing thermal energy storage was conducted. The study found that the recovery of waste heat in canning facilities can be performed in significant quantities using systems involving thermal energy storage that are both practical and economical. A demonstration project is proposed to determine actual waste heat recovery costs and benefits and to encourage system implementation by the food industry.

  15. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost

  16. Electrodialysis reversal: Process and cost approximations for treating coal-bed methane waters

    Energy Technology Data Exchange (ETDEWEB)

    Sajtar, E.T.; Bagley, D.M. [University of Wyoming, Laramie, WY (United States)

    2009-02-15

    Brackish waters with total dissolved solids (TDS) concentrations less than 10,000 mg/L are extracted from coal-beds in the Wyoming Powder River basin to facilitate the production of coal-bed methane. These waters frequently require treatment before disposal or use. Electrodialysis reversal (EDR) has not yet been used to treat these waters but this technology should be suitable. The question is whether EDR would be cost-effective. The purpose of this work, then, was to develop models for predicting the cost of EDR for brackish waters. These models, developed from data available in the literature, were found to predict actual EDR costs as a function of TDS removal, influent flow rate, chemical rejection efficiency, water recovery, electricity use, and labor cost within 10% of reported values. The total amortized cost for removing 1,000 mg/L of TDS from 10,000 m{sup 3}/day of influent assuming no concentrate disposal costs was predicted to range from $0.23/m{sup 3} to $0.85/m{sup 3} and was highly dependent on capital cost and facility life. Concentrate disposal costs significantly affected total treatment cost, providing a total treatment cost range from $0.38/m{sup 3} to $6.38/m{sup 3}, depending on concentrate disposal cost and water recovery. Pilot demonstrations of EDR in the Powder River basin should be conducted to determine the achievable water recovery when treating these waters.

  17. Nitrous Oxide and Nitrous Oxide-Free Low-Flow Anesthesia Using Bispectral Index Monitoring: Effects on Hemodynamics, Recovery Times, Volatile Anesthetic Consumption and Costs

    Directory of Open Access Journals (Sweden)

    Bengü Gülhan Köksal

    2010-12-01

    Full Text Available Aim: In this study, we aimed to compare the effects of desfluraneN2O and desflurane-fentanyl combinations on hemodynamics, recovery times, volatile anesthetic consumption and costs in low-flow desflurane anesthesia by bispectral index (BIS monitoring of depth of anesthesia. Methods: After approval of ethics committee and obtaining patient consents, 60 patients were divided into two equal groups randomly. Non-invasive blood pressure measurement, ECG, SpO2 and BIS were monitored. All patients received 10 L .min-1 100% oxygen with mask for 5 minute before intubation. 2 mg.kg-1 propofol, 2 μg.kg-1 fentanyl and 0.6 mg.kg-1 rocuronium bromide were administered at induction in both groups. Desfluran 6% was chosen for anesthesia maintenance. Group 1 received 50% O2-N2O mixture in 6 L.min-1 and Group 2 received 50% O2-air mixture in 6 L.min-1 as carrier gas. Low-flow anesthesia (1 L.min-1 was started after a 10-min period of initial high flow (6 L.min-1. In Group 2, infusion of fentanyl was begun in 1 μg.kg.hour-1 rate. Desflurane level was adjusted at a main BIS value of 40-60. Blood pressure, heart rate, FiO2, etO2, FiN22, EtN2O, FiCO2, EtCO2, Fidesfluran and Etdesflurane were recorded. Results: There were no significant differences between the two groups in terms of heart rate, arterial blood pressure, settings of desfluran and recovery time. BIS values (p<0.001 and anesthetic agent costs (p<0.001 were higher in Group 2. Conclusion: Using fentanyl infusion instead of nitrous oxide in low flow-anesthesia with desflurane did not alter the hemodynamic parameters. Fentanyl infusion with medical air-oxygen as carrier gas is an alternative technique, but increases BIS values and anesthetic agent costs. (The Medical Bulletin of Haseki 2010; 48: 132-8

  18. Assessment of Long-Run Marginal Costing of Transmission and ...

    African Journals Online (AJOL)

    The Long-Run Marginal Costing (LRMC) technique is used as a cost-reflecting pricing method and finds useful application in the recovery of the total investment cost for the use of a transmission or distribution network. This paper reviews recent applications of this technique based on some examples from United Kingdom, ...

  19. Reducing Building HVAC Costs with Site-Recovery Energy

    Science.gov (United States)

    Pargeter, Stephen J.

    2012-01-01

    Building owners are caught between two powerful forces--the need to lower energy costs and the need to meet or exceed outdoor air ventilation regulations for occupant health and comfort. Large amounts of energy are wasted each day from commercial, institutional, and government building sites as heating, ventilation, and air conditioning (HVAC)…

  20. Utilizing waste heat. Energy recovery options for trade and industry

    Energy Technology Data Exchange (ETDEWEB)

    Krieg, W

    1988-08-01

    The article shows options for efficient and low-cost thermal energy recovery. Heat recovery involves a number of problems, e.g. the type of waste heat, the uses of the energy recovered, and the best way of utilizing it. There is no generally applicable way of solving these problems. Some practical examples are presented. Economically efficient solutions require detailed technical knowledge as well as a good portion of creativity and imagination. (BR).

  1. Recovery of amino acids and phosphorus from manure

    Science.gov (United States)

    Background & Objectives: The recovery of phosphorus and proteins from manure could be advantageous to both offset costs and to improve and lessen the environmental impacts of manure. Phosphorous in manure can contaminate rivers, lakes, and bays through runoff, if applied onto a cropland excessively....

  2. Comparison of Configurations for High-Recovery Inland Desalination Systems

    Directory of Open Access Journals (Sweden)

    Philip A. Davies

    2012-09-01

    Full Text Available Desalination of brackish groundwater (BW is an effective approach to augment water supply, especially for inland regions that are far from seawater resources. Brackish water reverse osmosis (BWRO desalination is still subject to intensive energy consumption compared to the theoretical minimum energy demand. Here, we review some of the BWRO plants with various system arrangements. We look at how to minimize energy demands, as these contribute considerably to the cost of desalinated water. Different configurations of BWRO system have been compared from the view point of normalized specific energy consumption (SEC. Analysis is made at theoretical limits. The SEC reduction of BWRO can be achieved by (i increasing number of stages, (ii using an energy recovery device (ERD, or (iii operating the BWRO in batch mode or closed circuit mode. Application of more stages not only reduces SEC but also improves water recovery. However, this improvement is less pronounced when the number of stages exceeds four. Alternatively and more favourably, the BWRO system can be operated in Closed Circuit Desalination (CCD mode and gives a comparative SEC to that of the 3-stage system with a recovery ratio of 80%. A further reduction of about 30% in SEC can be achieved through batch-RO operation. Moreover, the costly ERDs and booster pumps are avoided with both CCD and batch-RO, thus furthering the effectiveness of lowering the costs of these innovative approaches.

  3. An evaluation of service use outcomes in a Recovery College.

    Science.gov (United States)

    Bourne, Philippa; Meddings, Sara; Whittington, Adrian

    2017-12-23

    Recovery Colleges offer educational courses about recovery and mental health which are co-produced by mental health professionals and experts by lived experience. Previous evaluations have found positive effects of Recovery Colleges on a range of outcomes including wellbeing, recovery and quality of life. To evaluate service use outcomes for Sussex Recovery College students who use mental health services. The study used a controlled-before-and-after design. It used archival data to analyse service use before and after participants registered with the Recovery College (n = 463). Participants acted as their own control. Students used mental health services less after attending the Recovery College than before. Students who attended the Recovery College showed significant reductions in occupied hospital bed days, admissions, admissions under section and community contacts in the 18 months post compared with the 18 months before registering. Reductions in service use were greater for those who completed a course than those who registered but did not complete a course. These findings suggest that attending Recovery College courses is associated with reduced service use. The reductions equate to non-cashable cost-savings of £1200 per registered student and £1760 for students who completed a course. Further research is needed to investigate causality.

  4. HYBRID SULFUR RECOVERY PROCESS FOR NATURAL GAS UPGRADING

    International Nuclear Information System (INIS)

    Girish Srinivas; Steven C. Gebhard; David W. DeBerry

    2001-01-01

    This first quarter report of 2001 describes progress on a project funded by the U.S. Department of Energy (DOE) to test a hybrid sulfur recovery process for natural gas upgrading. The process concept represents a low cost option for direct treatment of natural gas streams to remove H(sub 2)S in quantities equivalent to 0.2-25 metric tons (LT) of sulfur per day. This process is projected to have lower capital and operating costs than the competing technologies, amine/aqueous iron liquid redox and amine/Claus/tail gas treating, and have a smaller plant footprint, making it well suited to both on-shore and offshore applications. CrystaSulf(trademark) (service mark of Gas Research Institute) is a new nonaqueous sulfur recovery process that removes hydrogen sulfide (H(sub 2)S) from gas streams and converts it into elemental sulfur. CrystaSulf features high sulfur recovery similar to aqueous-iron liquid redox sulfur recovery processes, but differs from the aqueous processes in that CrystaSulf controls the location where elemental sulfur particles are formed. In the hybrid process, approximately 1/3 of the total H(sub 2)S in the natural gas is first oxidized to SO(sub 2) at low temperatures over a heterogeneous catalyst. Low temperature oxidation is done so that the H(sub 2)S can be oxidized in the presence of methane and other hydrocarbons without oxidation of the hydrocarbons. The project involves the development of a catalyst using laboratory/bench-scale catalyst testing, and then demonstration of the catalyst at CrystaTech's pilot plant in west Texas. During this reporting periods new catalyst formulations were tested. The experiments showed that the newest catalyst has slightly better performance, but catalyst TDA No.2 is still superior overall for use with the hybrid CrystaSulf process due to lower costs. Plans for catalyst pelletization and continued testing are described

  5. Cost Efficient Optimization Based Supervisory Controller for Supermarket Subsystems with Heat Recovery

    DEFF Research Database (Denmark)

    Minko, Tomasz; Wisniewski, Rafal; Bendtsen, Jan Dimon

    2015-01-01

    In this paper, we present a simple modelling approach for a thermal system, which consists of heating, ventilation, air conditioning system (HVAC) and a vapor compression cycle (VCC) system, with one loop heat recovery. In addition a simple model for water tank is presented, in which the reclaimed...

  6. Transmission pricing and stranded costs in the electric power industry

    International Nuclear Information System (INIS)

    Baumol, W.J.; Sidak, J.G.

    1995-09-01

    Stranded costs are those costs that electric utilities are currently permitted to recover through their rates but whose recovery may be impeded or prevented by the advent of competition in the industry. Estimates of these costs run from the tens to the hundreds of billions of dollars. Should regulators permit utilities to recover stranded costs while they take steps to promote competition in the electric power industry. William Baumol and J. Gregory Sidak argue that answer to that question should be yes.The authors show that a transmission price, the price for sending electricity over the transmission grid, can be determined in a manner that is compatible with economic efficiency and clearly neutral in its effects upon all competitors in electricity generation. A correctly constructed regime of transmission pricing may in fact achieve the efficiency and equity goals that justify the recovery of stranded costs

  7. Investigation of the strontium (Sr(II)) adsorption of an alginate microsphere as a low-cost adsorbent for removal and recovery from seawater.

    Science.gov (United States)

    Hong, Hye-Jin; Ryu, Jungho; Park, In-Su; Ryu, Taegong; Chung, Kang-Sup; Kim, Byuong-Gyu

    2016-01-01

    In this paper, we investigated alginate microspheres as a low-cost adsorbent for strontium (Sr(II)) removal and recovery from seawater. Alginate microspheres have demonstrated a superior adsorption capacity for Sr(II) ions (≈110 mg/g). A Freundlich isotherm model fits well with the Sr(II) adsorption of an alginate microsphere. The mechanism of Sr(II) adsorption is inferred as an ion exchange reaction with Ca(II) ions. The effects of the solution pH and co-existing ions in seawater are also investigated. Except for a pH of 1-2, Sr(II) adsorption capacity is not affected by pH. However, increasing the seawater concentration of metal cations seriously decreases Sr(II) uptake. In particular, highly concentrated (15,000 mg/L) Na(I) ions significantly interfere with Sr(II) adsorption. Sr(II) desorption was performed using 0.1 M HCl and CaCl2. Both regenerants show an excellent desorption efficiency, but the FTIR spectrum reveals that the chemical structure of the microsphere is destroyed after repeated use of HCl. Conversely, CaCl2 successfully desorbed Sr(II) without damage, and the Sr(II) adsorption capacity does not decrease after three repeated uses. The alginate microsphere was also applied to the adsorption of Sr(II) in a real seawater medium. Because of inhibition by co-existing ions, the Sr(II) adsorption capacity was decreased and the adsorption rate was retarded compared with D.I. water. Although the Sr(II) adsorption capacity was decreased, the alginate microsphere still exhibited 17.8 mg/g of Sr(II) uptake in the seawater medium. Considering its excellent Sr(II) uptake in seawater and its reusability, an alginate microsphere is an appropriate cost-effective adsorbent for the removal and recovery of Sr(II) from seawater. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Examination of uranium recovery technique from sea water using natural components for adsorbent

    International Nuclear Information System (INIS)

    Tanaka, Nobuyuki; Masaki, Hiroyuki; Shimizu, Takao; Tokiwai, Moriyasu

    2010-01-01

    In this study, we investigated the potency of natural components as adsorbent for uranium recovery from seawater. In addition, cost evaluation of uranium recovery from seawater using natural components for adsorbents was performed. Furthermore, new ideas on reservation system of adsorbents at sea area were proposed. Several poly-phenols were selected as adsorbent reagents, then they were adsorbed on the support such as cotton fiber by several methods as the followings; chemical syntheses, electrical beam irradiation, and traditional dyeing. As a result, the adsorbent made by traditional dyeing method using gallnut tannin as natural component, was showed high performance for uranium recovery from seawater on only the first. It was evaluated that traditional dyeing method had also advantage in the manufacturing cost, comparing with earlier method. Additionally, it was considered that reservation system of adsorbent at sea was able to be simplified compared with earlier system. Consequently, uranium recovery from sea water using natural components as adsorbent proposed in this study had a potency of practical use. (author)

  9. Resource recovery and reuse as an incentive for a more viable sanitation service chain

    Directory of Open Access Journals (Sweden)

    Krishna C. Rao

    2017-06-01

    Full Text Available Recovering nutrients, water and energy from domestic waste streams, including wastewater and faecal sludge, is slowly gaining momentum in low-income countries. Resource recovery and reuse (RRR offers value beyond environmental benefits through cost recovery. An expected game changer in sanitation service provision is a business model where benefits accrued via RRR can support upstream sanitation services despite the multitude of private and public stakeholders involved from waste collection to treatment. This paper shows options of how resource recovery and reuse can be an incentive for the sustainable sanitation service chain, by recovering costs where revenue can feed back internally or using generated revenues from reuse to fill financial gaps across the service chain to complement other supporting mechanisms for making waste management more attractive.

  10. Advanced regenerative heat recovery system

    Science.gov (United States)

    Prasad, A.; Jasti, J. K.

    1982-02-01

    A regenerative heat recovery system was designed and fabricated to deliver 1500 scfm preheated air to a maximum temperature of 1600 F. Since this system is operating at 2000 F, the internal parts were designed to be fabricated with ceramic materials. This system is also designed to be adaptable to an internal metallic structure to operate in the range of 1100 to 1500 F. A test facility was designed and fabricated to test this system. The test facility is equipped to impose a pressure differential of up to 27 inches of water column in between preheated air and flue gas lines for checking possible leakage through the seals. The preliminary tests conducted on the advanced regenerative heat recovery system indicate the thermal effectiveness in the range of 60% to 70%. Bench scale studies were conducted on various ceramic and gasket materials to identify the proper material to be used in high temperature applications. A market survey was conducted to identify the application areas for this heat recovery system. A cost/benefit analysis showed a payback period of less than one and a half years.

  11. Diet-dependent heat emission reveals costs of post-diapause recovery from different nutritional sources in a carnivorous beetle

    Science.gov (United States)

    Toft, Søren; Nielsen, Søren Achim

    2017-08-01

    Restoration of fat stores is metabolic first priority for many insects that emerge from hibernation with depleted fat bodies. To some extent, the animals must be flexible and use whatever foods available irrespective of their nutrient composition. Previously, the carabid beetles Anchomenus dorsalis have been found to refill their fat stores to the same extent over 9 days irrespective of the nutrient composition of their food. However, a higher cost of fat deposition when the food was rich in sugar or protein rather than lipid was indicated by higher total energy consumption. Here, we test the hypothesis of increased metabolic costs of building fat stores from sugar- or protein-rich food than from lipid-rich food by microcalorimetry. We measured the heat emitted from beetles that had fed on sugar-, protein-, or lipid-rich food for 0 (common control), 2, 5, or 10 days. As predicted, heat emission was increased in beetles getting sugar- and protein-rich food compared with those getting lipid-rich food. However, we did not confirm the beetles' ability to rebuild fat stores from protein-rich food; instead, they increased in lean mass. Overall, sugar-rich food seems to be optimal for post-winter recovery, because it is better than lipid-rich food that allows concurrent rebuilding of fat stores and lean mass, which may benefit preparation for spring migration and reproduction. We propose that overwintered fruits may be highly preferred post-diapause food for these otherwise mostly carnivorous beetles.

  12. Diet-dependent heat emission reveals costs of post-diapause recovery from different nutritional sources in a carnivorous beetle.

    Science.gov (United States)

    Toft, Søren; Nielsen, Søren Achim

    2017-08-01

    Restoration of fat stores is metabolic first priority for many insects that emerge from hibernation with depleted fat bodies. To some extent, the animals must be flexible and use whatever foods available irrespective of their nutrient composition. Previously, the carabid beetles Anchomenus dorsalis have been found to refill their fat stores to the same extent over 9 days irrespective of the nutrient composition of their food. However, a higher cost of fat deposition when the food was rich in sugar or protein rather than lipid was indicated by higher total energy consumption. Here, we test the hypothesis of increased metabolic costs of building fat stores from sugar- or protein-rich food than from lipid-rich food by microcalorimetry. We measured the heat emitted from beetles that had fed on sugar-, protein-, or lipid-rich food for 0 (common control), 2, 5, or 10 days. As predicted, heat emission was increased in beetles getting sugar- and protein-rich food compared with those getting lipid-rich food. However, we did not confirm the beetles' ability to rebuild fat stores from protein-rich food; instead, they increased in lean mass. Overall, sugar-rich food seems to be optimal for post-winter recovery, because it is better than lipid-rich food that allows concurrent rebuilding of fat stores and lean mass, which may benefit preparation for spring migration and reproduction. We propose that overwintered fruits may be highly preferred post-diapause food for these otherwise mostly carnivorous beetles.

  13. Increasing freshwater recovery upon aquifer storage : A field and modelling study of dedicated aquifer storage and recovery configurations in brackish-saline aquifers

    NARCIS (Netherlands)

    Zuurbier, Koen

    2016-01-01

    The subsurface may provide opportunities for robust, effective, sustainable, and cost-efficient freshwater management solutions. For instance, via aquifer storage and recovery (ASR; Pyne, 2005): “the storage of water in a suitable aquifer through a well during times when water is available, and the

  14. Marginal pricing of transmission services. An analysis of cost recovery

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Arriaga, I.J.., Rubio, F.J. [Instituto de Investigacion Technologica, Universidad Pontificia Comillas, Madrid (Spain); Puerta, J.F.; Arceluz, J.; Marin, J. [Unidad de Planificacion Estrategica, Iberdrola, Madrid (Spain)

    1996-12-31

    The authors present an in-depth analysis of network revenues that are computed with marginal pricing, and investigate the reasons why marginal prices in actual power systems fail to recover total incurred network costs. The major causes of the failure are identified and illustrated with numerical examples. The paper analyzes the regulatory implications of marginal network pricing in the context of competitive electricity markets and provides suggestions for the meaningful allocation of network costs among users. 5 figs., 9 tabs., 8 refs.

  15. Marginal pricing of transmission services. An analysis of cost recovery

    International Nuclear Information System (INIS)

    Perez-Arriaga, I.J.., Rubio, F.J.; Puerta, J.F.; Arceluz, J.; Marin, J.

    1996-01-01

    The authors present an in-depth analysis of network revenues that are computed with marginal pricing, and investigate the reasons why marginal prices in actual power systems fail to recover total incurred network costs. The major causes of the failure are identified and illustrated with numerical examples. The paper analyzes the regulatory implications of marginal network pricing in the context of competitive electricity markets and provides suggestions for the meaningful allocation of network costs among users. 5 figs., 9 tabs., 8 refs

  16. 26 CFR 1.737-3 - Basis adjustments; Recovery rules.

    Science.gov (United States)

    2010-04-01

    ... respective amounts of unrealized appreciation in such properties at the time of the distribution. (4) Section... depreciation (or other cost recovery) method (including first-year conventions) available to the partnership..., partnership income equals partnership expenses (other than depreciation deductions for contributed property...

  17. Heat recovery optimization in a steam-assisted gravity drainage (SAGD) plant

    International Nuclear Information System (INIS)

    Ashrafi, Omid; Navarri, Philippe; Hughes, Robin; Lu, Dennis

    2016-01-01

    Pinch Analysis was used to improve the energy performance of a typical steam-assisted gravity drainage (SAGD) process. The objective of this work was to reduce the amount of natural gas used for steam generation in the plant and the associated greenhouse gas emissions. The INTEGRATION software was used to analyze how heat is being used in the existing design and identify inefficient heat exchanges causing excessive use of energy. Several modifications to improve the base case heat exchanger network (HEN) were identified. The proposed retrofit projects reduced the process heating demands by improving the existing heat recovery system and by recovering waste heat and decreased natural gas consumption in the steam production unit by approximately 40 MW, representing approximately 8% of total consumption. As a result, the amount of glycol used to transfer energy across the facility was also reduced, as well as the electricity consumption related to glycol pumping. It was shown that the proposed heat recovery projects reduced natural gas costs by C$3.8 million/y and greenhouse gas emissions by 61,700 t/y of CO_2. - Highlights: • A heat integration study using Pinch analysis was performed in a SAGD process. • Several modifications are suggested to improve the existing heat recovery system. • Heat recovery projects increased boiler feed water and combustion air temperatures. • The proposed modifications reduced natural gas use for steam generation. • Heat recovery significantly reduced operating costs and greenhouse gas emissions.

  18. Economical photovoltaic power generation with heat recovery

    Science.gov (United States)

    Ascher, G.

    1977-01-01

    Three designs for conversion of solar radiation to electricity and thermal energy are analyzed. The objective of these converters is to increase the electric and thermal output for each photovoltaic array so as to lower the cell cost relative to the amount of energy delivered. An analysis of the economical aspects of conversion by photovoltaic cells with heat recovery is carried out in terms of hypothetical examples. Thus, it is shown that the original cost of say $40,000 per generated kilowat can be reduced to $572.00 per kilowatt by increasing the original electric output of 1 kW to 10 kW in electricity and 60 kW in thermal energy. The newly derived specific cost is only 1.4 percent of the original one. It is expected that a cost reduction of roughly 2% of the present specific cost per kilowatt will greatly stimulate public acceptance of photovoltaic terrestrial conversion to electricity.

  19. Affordable Rankine Cycle Waste Heat Recovery for Heavy Duty Trucks

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, Swami Nathan [Eaton Corporation

    2017-06-30

    Nearly 30% of fuel energy is not utilized and wasted in the engine exhaust. Organic Rankine Cycle (ORC) based waste heat recovery (WHR) systems offer a promising approach on waste energy recovery and improving the efficiency of Heavy-Duty diesel engines. Major barriers in the ORC WHR system are the system cost and controversial waste heat recovery working fluids. More than 40% of the system cost is from the additional heat exchangers (recuperator, condenser and tail pipe boiler). The secondary working fluid loop designed in ORC system is either flammable or environmentally sensitive. The Eaton team investigated a novel approach to reduce the cost of implementing ORC based WHR systems to Heavy-Duty (HD) Diesel engines while utilizing safest working fluids. Affordable Rankine Cycle (ARC) concept aimed to define the next generation of waste energy recuperation with a cost optimized WHR system. ARC project used engine coolant as the working fluid. This approach reduced the need for a secondary working fluid circuit and subsequent complexity. A portion of the liquid phase engine coolant has been pressurized through a set of working fluid pumps and used to recover waste heat from the exhaust gas recirculation (EGR) and exhaust tail pipe exhaust energy. While absorbing heat, the mixture is partially vaporized but remains a wet binary mixture. The pressurized mixed-phase engine coolant mixture is then expanded through a fixed-volume ratio expander that is compatible with two-phase conditions. Heat rejection is accomplished through the engine radiator, avoiding the need for a separate condenser. The ARC system has been investigated for PACCAR’s MX-13 HD diesel engine.

  20. Benefits and costs of alcoholic relationships and recovery through Al-Anon.

    Science.gov (United States)

    Young, Lance Brendan; Timko, Christine

    2015-01-01

    Codependence is an ambiguous and disputed term often used to characterize both those who maintain relationships with alcoholics and those who seek help through resources such as Al-Anon Family Groups. The purpose of this article is to better understand non-pathological reasons for maintaining alcoholic relationships and for help-seeking by detailing the costs and benefits of those choices. The costs and benefits both of remaining in an alcoholic relationship and of seeking help in Al-Anon were identified through a review of available research on alcoholic family systems, Al-Anon, and other mutual-support groups. Alcoholic relationships may benefit concerned others by preserving self-identity, social identity, values, security, stability, and hope. Costs of alcoholic relationships include physical symptoms, injury, mental problems, financial difficulty, legal troubles, and relational distress. Al-Anon is perceived beneficial for six primary reasons: Al-Anon philosophy, format, social support, accessibility, effectiveness, and potential to change the drinker's behavior. Possible costs of Al-Anon include marginalization of the concerned other, blame, codependent pathology, sexist stereotyping, substitute dependency, and perpetuating victimization. Conclusions/Importance: The identified costs and benefits of alcoholic relationships and help-seeking in Al-Anon can help to model decision-making processes using existing behavioral health frameworks without defaulting to the stigmatized and ambiguous codependence terminology.

  1. Chloride metallurgy for uranium recovery: concept and costs

    International Nuclear Information System (INIS)

    Campbell, M.C.; Ritcey, G.M.; Joe, E.G.

    1982-01-01

    Uranium, thorium and radium are all effectively solubilized in chloride media. This provides a means to separate and isolate these species for ultimate sale or disposal. The laboratory work on the applications of hydrochloric acid leaching, chlorine assisted leaching and high temperature chlorination is reviewed. An indication of costs and benefits is provided to enable the evaluation of this technology as an option for reducing the environmental impact of tailings

  2. Possibility of heat recovery from gray water in residential building

    Directory of Open Access Journals (Sweden)

    Mazur Aleksandra

    2017-12-01

    Full Text Available Recovery of waste heat from gray water can be an interesting alternative to other energy saving systems in a building, including alternative energy sources. Mainly, due to a number of advantages including independence from weather conditions, small investment outlay, lack of user support, or a slight interference with the installation system. The purpose of this article is to present the financial effectiveness of installations which provide hot, usable water to a detached house, using a Drain Water Heat Recovery (DWHR system depending on the number of system users and the various combinations of bathing time in the shower, which has an influence on the daily warm water demand in each of the considered options. The economic analysis of the adopted installation variants is based on the Life Cycle Cost (LCC method, which is characterized by the fact that it also includes the operating costs in addition to the capital expenditure during the entire analysis period. For each case, the necessary devices were selected and the cost of their installation was estimated.

  3. Possibility of heat recovery from gray water in residential building

    Science.gov (United States)

    Mazur, Aleksandra; Słyś, Daniel

    2017-12-01

    Recovery of waste heat from gray water can be an interesting alternative to other energy saving systems in a building, including alternative energy sources. Mainly, due to a number of advantages including independence from weather conditions, small investment outlay, lack of user support, or a slight interference with the installation system. The purpose of this article is to present the financial effectiveness of installations which provide hot, usable water to a detached house, using a Drain Water Heat Recovery (DWHR) system depending on the number of system users and the various combinations of bathing time in the shower, which has an influence on the daily warm water demand in each of the considered options. The economic analysis of the adopted installation variants is based on the Life Cycle Cost (LCC) method, which is characterized by the fact that it also includes the operating costs in addition to the capital expenditure during the entire analysis period. For each case, the necessary devices were selected and the cost of their installation was estimated.

  4. Conceptual design of krypton recovery plant by porous membrane method

    International Nuclear Information System (INIS)

    Yoshida, Hiroshi; Fujine, Sachio; Shimizu, Toku; Saito, Keiichiro; Ouchi, Misao

    1979-10-01

    A conceptual design of a krypton recovery plant by porous membrane method was made to study feasibility of treating fuel reprocessing off-gas. Specifications of the plant could be clarified, such as off-gas pretreatment system, first cascade system of gaseous diffusion Hertz cascade composed of two-compartment diffusers, storage system, shield and housing and operating conditions. Capital costs and operating costs of the plant were estimated for different operating conditions and cost parameters. Technical and economic feasibility of the method compares favorably with those of the cryogenic distillation or the solvent absorption method. (author)

  5. Prescribed burning cost recovery analysis on nonindustrial private forestland in North Carolina

    Science.gov (United States)

    Ronald J. Myers; William Powell; Mark Megalos

    2012-01-01

    A statewide internal analysis of prescribed burning costs was conducted by the North Carolina Division of Forest Resources (NCDFR) in 2008 to examine the regional differences of site preparation and silvicultural burning costs, and to determine which components were most responsible for losses or gains. This study analyzed actual costs for 90 site preparation (2,559...

  6. METHODOLOGICAL BASES OF PRACTICAL APPLICATION OF PRODUCTION COSTS MANAGEMENT ACCOUNTING AT OIL AND FAT ENTERPRISES

    Directory of Open Access Journals (Sweden)

    E. Mykhalska

    2014-12-01

    Full Text Available Implementing of models of production costs management accounting in response to responsibility centers into Ukrainian oil and fat enterprises is the aim of their full optimization in terms of current competitive market. Setting production costs as an object of every single responsibility center will enable to update the whole range of accounting operations on costs paperwork, used raw and other materials assessment, cost recovery from labour costs with benefits-related deduction, depreciation recovery due to season production variability, services distribution of auxiliary and service departments and general production costs. In this regard, referring to the current costs accounting at oil and fat enterprises of Ukraine it should be admitted that the main purpose of the article is to explore the above-mentioned issues.

  7. 75 FR 33379 - Railroad Cost Recovery Procedures-Productivity Adjustment; Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-06-11

    ... information is contained in the Board's June 14, 2010 decision, which is available on our website at http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the office of Public... Cost Adjustment Factor AGENCY: Surface Transportation Board. [[Page 33380

  8. Distortions Imposed By Inflation on Historical-Cost Depreciation

    OpenAIRE

    Bravo-Ureta, Boris E.

    1983-01-01

    The use of historical-cost depreciation in periods of persistent inflation decreases the present value of depreciation deductions, thus understating the true economic cost of capital and increasing the real after-tax rate of return required by potential investors. Efforts to correct these problems by adopting depreciation methods that allow for artificially short recovery periods or accelerated rates do not provide an adequate solution. Distortions imposed by inflation on historical-cost depr...

  9. POWERCO, Nuclear Power Plant Electricity Cost and Economics

    International Nuclear Information System (INIS)

    Tyson, Frank D.

    1982-01-01

    1 - Description of problem or function: POWERCO calculates the cost of electricity produced by nuclear power stations, assuming all cash expenses such as investment and fuel costs, operating expenses, and taxes are known. The power cost is held constant throughout the project life. 2 - Method of solution: The cost calculation is based on the requirement that income received must provide for recovery of investment, return on investment, and all operating expenses. Equations are developed to calculate true fixed charge rates and true average fuel working capital

  10. Application of molten salt oxidation for the minimization and recovery of plutonium-238 contaminated wastes

    International Nuclear Information System (INIS)

    Wishau, R.; Ramsey, K.B.; Montoya, A.

    1998-01-01

    This paper presents the technical and economic feasibility of molten salt oxidation technology as a volume reduction and recovery process for 238 Pu contaminated waste. Combustible low-level waste material contaminated with 238 Pu residue is destroyed by oxidation in a 900 C molten salt reaction vessel. The combustible waste is destroyed creating carbon dioxide and steam and a small amount of ash and insoluble 2328 Pu in the spent salt. The valuable 238 Pu is recycled using aqueous recovery techniques. Experimental test results for this technology indicate a plutonium recovery efficiency of 99%. Molten salt oxidation stabilizes the waste converting it to a non-combustible waste. Thus installation and use of molten salt oxidation technology will substantially reduce the volume of 238 Pu contaminated waste. Cost-effectiveness evaluations of molten salt oxidation indicate a significant cost savings when compared to the present plans to package, or re-package, certify and transport these wastes to the Waste Isolation Pilot Plant for permanent disposal. Clear and distinct cost advantages exist for MSO when the monetary value of the recovered 238 Pu is considered

  11. Resource and energy recovery options for fermentation industry residuals

    Energy Technology Data Exchange (ETDEWEB)

    Chiesa, S C [Santa Clara Univ., CA (USA); Manning, Jr, J F [Alabama Univ., Birmingham, AL (USA)

    1989-01-01

    Over the last 40 years, the fermentation industry has provided facility planners, plant operators and environmental engineers with a wide range of residuals management challenges and resource/energy recovery opportunities. In response, the industry has helped pioneer the use of a number of innovative resource and energy recovery technologies. Production of animal feed supplements, composts, fertilizers, soil amendments, commercial baking additives and microbial protein materials have all been detailed in the literature. In many such cases, recovery of by-products significantly reduces the need for treatment and disposal facilities. Stable, reliable anaerobic biological treatment processes have also been developed to recover significant amounts of energy in the form of methane gas. Alternatively, dewatered or condensed organic fermentation industry residuals have been used as fuels for incineration-based energy recovery systems. The sale or use of recovered by-products and/or energy can be used to offset required processing costs and provide a technically and environmentally viable alternative to traditional treatment and disposal strategies. This review examines resource recovery options currently used or proposed for fermentation industry residuals and the conditions necessary for their successful application. (author).

  12. Heat Recovery From Tail Gas Incineration To Generate Power

    Energy Technology Data Exchange (ETDEWEB)

    Tawfik, Tarek

    2010-09-15

    Many industrial processes result in tail gas wastes that must be flared or incinerated to abide with environmental guidelines. Tail gas incineration occurs in several chemical processes resulting in high-temperature exhaust gas that simply go to the stack, thus wasting all that valuable heat! This paper discusses useful heat recovery and electric power generation utilizing available heat in exhaust gas from tail gas incinerators. This heat will be recovered in a waste-heat recovery boiler that will produce superheated steam to expand in a steam turbine to generate power. A detailed cost estimate is presented.

  13. Increasing CO2 storage in oil recovery

    International Nuclear Information System (INIS)

    Jessen, K.; Kovscek, A.R.; Orr, F.M. Jr.

    2005-01-01

    Oil fields offer a significant potential for storing CO 2 and will most likely be the first large scale geological targets for sequestration as the infrastructure, experience and permitting procedures already exist. The problem of co-optimizing oil production and CO 2 storage differs significantly from current gas injection practice due to the cost-benefit imbalance resulting from buying CO 2 for enhanced oil recovery projects. Consequently, operators aim to minimize the amount of CO 2 required to sweep an oil reservoir. For sequestration purposes, where high availability of low cost CO 2 is assumed, the design parameters of enhanced oil recovery processes must be re-defined to optimize the amount of CO 2 left in the reservoir at the time of abandonment. To redefine properly the design parameters, thorough insight into the mechanisms controlling the pore scale displacement efficiency and the overall sweep efficiency is essential. We demonstrate by calculation examples the different mechanisms controlling the displacement behavior of CO 2 sequestration schemes, the interaction between flow and phase equilibrium and how proper design of the injection gas composition and well completion are required to co-optimize oil production and CO 2 storage. [Author

  14. Increasing CO2 storage in oil recovery

    International Nuclear Information System (INIS)

    Jessen, Kristian; Kovscek, Anthony R.; Orr, Franklin M.

    2005-01-01

    Oil fields offer a significant potential for storing CO 2 and will most likely be the first large scale geological targets for sequestration as the infrastructure, experience and permitting procedures already exist. The problem of co-optimizing oil production and CO 2 storage differs significantly from current gas injection practice due to the cost-benefit imbalance resulting from buying CO 2 for enhanced oil recovery projects. Consequently, operators aim to minimize the amount of CO 2 required to sweep an oil reservoir. For sequestration purposes, where high availability of low cost CO 2 is assumed, the design parameters of enhanced oil recovery processes must be re-defined to optimize the amount of CO 2 left in the reservoir at the time of abandonment. To redefine properly the design parameters, thorough insight into the mechanisms controlling the pore scale displacement efficiency and the overall sweep efficiency is essential. We demonstrate by calculation examples the different mechanisms controlling the displacement behavior of CO 2 sequestration schemes, the interaction between flow and phase equilibrium and how proper design of the injection gas composition and well completion are required to co-optimize oil production and CO 2 storage

  15. Biofuels from stumps and small roundwood - Costs and CO{sub 2} benefits

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Lisa Naeslund; Gustavsson, Leif [Ecotechnology, Department of Engineering, Physics and Mathematics, Mid Sweden University, SE-831 25 Oestersund (Sweden)

    2008-10-15

    In this study, we analysed and compared costs, primary energy use and CO{sub 2} benefits of recovering stumps and small roundwood from thinnings, together with logging residues. Small roundwood, chipped at a terminal or end-user, has a cost comparable to the chip system and a primary energy use comparable to the bundle system used for recovery of logging residues. The small roundwood system with roadside chipping is more expensive. As productivity in the cutting process improves, the small roundwood alternatives become more cost-effective. The stump system has costs in the same range as or lower than the chip and bundle systems. Forestry operations for stump and small roundwood recovery require considerable primary energy, but net recovery per hectare is much greater than for the chip and bundle systems, which means that more fossil fuel can be displaced per hectare of clearcut than with a chip or a bundle system. Stumps and small roundwood from thinnings can become as cost-effective as logging residues in the near future. Furthermore, when stumps and small roundwood from thinnings are also used to replace fossil fuels, the potential CO{sub 2} reduction will be about four times as great as when only logging residues are used with a traditional chip system. (author)

  16. Disaster Debris Recovery Database - Recovery

    Data.gov (United States)

    U.S. Environmental Protection Agency — The US EPA Disaster Debris Recovery Database (DDRD) promotes the proper recovery, recycling, and disposal of disaster debris for emergency responders at the federal,...

  17. Recovery in soccer : part ii-recovery strategies.

    Science.gov (United States)

    Nédélec, Mathieu; McCall, Alan; Carling, Chris; Legall, Franck; Berthoin, Serge; Dupont, Gregory

    2013-01-01

    In the formerly published part I of this two-part review, we examined fatigue after soccer matchplay and recovery kinetics of physical performance, and cognitive, subjective and biological markers. To reduce the magnitude of fatigue and to accelerate the time to fully recover after completion, several recovery strategies are now used in professional soccer teams. During congested fixture schedules, recovery strategies are highly required to alleviate post-match fatigue, and then to regain performance faster and reduce the risk of injury. Fatigue following competition is multifactorial and mainly related to dehydration, glycogen depletion, muscle damage and mental fatigue. Recovery strategies should consequently be targeted against the major causes of fatigue. Strategies reviewed in part II of this article were nutritional intake, cold water immersion, sleeping, active recovery, stretching, compression garments, massage and electrical stimulation. Some strategies such as hydration, diet and sleep are effective in their ability to counteract the fatigue mechanisms. Providing milk drinks to players at the end of competition and a meal containing high-glycaemic index carbohydrate and protein within the hour following the match are effective in replenishing substrate stores and optimizing muscle-damage repair. Sleep is an essential part of recovery management. Sleep disturbance after a match is common and can negatively impact on the recovery process. Cold water immersion is effective during acute periods of match congestion in order to regain performance levels faster and repress the acute inflammatory process. Scientific evidence for other strategies reviewed in their ability to accelerate the return to the initial level of performance is still lacking. These include active recovery, stretching, compression garments, massage and electrical stimulation. While this does not mean that these strategies do not aid the recovery process, the protocols implemented up until

  18. Surplus Facilities and Resource Conservation and Recovery Act Closure program plan, fiscal year 1992

    International Nuclear Information System (INIS)

    Hughes, M.C.; Wahlen, R.K.; Winship, R.A.

    1991-10-01

    The Surplus Facilities and Resource Conservation and Recovery Act Closure program is responsible to US Department of Energy Field Office, Richland for the safe, cost-effective surveillance, maintenance, and decommissioning of surplus facilities at the Hanford Site. The Surplus Facilities and Resource Conservation and Recovery Act Closure program is also responsible to US Department of Energy Field Office, Richland for the program management of specific Resource Conservation and Recovery Act closures at the Hanford Site. This program plan addresses only the surplus facilities. The criteria used to evaluate each factor relative to decommissioning are based on the guidelines presented by the US Department of Energy Field Office, Richland, Environmental Restoration Division. The guidelines are consistent with the Westinghouse Hanford Company commitment to decommission Hanford Site retired facilities in the safest and most cost-effective way achievable. This document outlines the plan for managing these facilities until disposal

  19. IDC reengineering Phase 2 & 3 US industry standard cost estimate summary

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huelskamp, Robert M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-01-01

    Sandia National Laboratories has prepared a ROM cost estimate for budgetary planning for the IDC Reengineering Phase 2 & 3 effort, using a commercial software cost estimation tool calibrated to US industry performance parameters. This is not a cost estimate for Sandia to perform the project. This report provides the ROM cost estimate and describes the methodology, assumptions, and cost model details used to create the ROM cost estimate. ROM Cost Estimate Disclaimer Contained herein is a Rough Order of Magnitude (ROM) cost estimate that has been provided to enable initial planning for this proposed project. This ROM cost estimate is submitted to facilitate informal discussions in relation to this project and is NOT intended to commit Sandia National Laboratories (Sandia) or its resources. Furthermore, as a Federally Funded Research and Development Center (FFRDC), Sandia must be compliant with the Anti-Deficiency Act and operate on a full-cost recovery basis. Therefore, while Sandia, in conjunction with the Sponsor, will use best judgment to execute work and to address the highest risks and most important issues in order to effectively manage within cost constraints, this ROM estimate and any subsequent approved cost estimates are on a 'full-cost recovery' basis. Thus, work can neither commence nor continue unless adequate funding has been accepted and certified by DOE.

  20. Economic benefits from food recovery at the retail stage: an application to Italian food chains.

    Science.gov (United States)

    Giuseppe, Aiello; Mario, Enea; Cinzia, Muriana

    2014-07-01

    The food supply chain is affected by losses of products near to their expiry date or damaged by improper transportation or production defects. Such products are usually poorly attractive for the consumer in the target market even if they maintain their nutritional properties. On the other hand undernourished people face every day the problem of fulfilling their nutritional needs usually relying on non-profit organizations. In this field the food recovery enabling economic benefits for donors is nowadays seen as a coherent way to manage food products unsalable in the target market for various causes and thus destined to be discarded and disposed to landfill thus representing only a cost. Despite its obvious affordability the food recovery is today not always practiced because the economic benefits that could be achieved are barely known. The paper aims at presenting a deterministic mathematical model for the optimization of the supply chain composed by retailers and potential recipients that practice the food recovery, taking into account the benefits recognized to donors and the management costs of the food recovery. The model determines the optimal time to withdraw the products from the shelves as well as the quantities to be donated to the non-profit organizations and those to be sent to the livestock market maximizing the retailer profit. The results show that the optimal conditions ensuring the affordability of the food recovery strategy including the tax reliefs and cost saving for the retailers outperforms the profit achievable in absence of such a system. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Recovery of uranium from crude uranium tetrafluoride

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, S K; Bellary, M P; Keni, V S [Chemical Engineering Division, Bhabha Atomic Research Centre, Mumbai (India)

    1994-06-01

    An innovative process has been developed for recovery of uranium from crude uranium tetrafluoride cake. The process is based on direct dissolution of uranium tetrafluoride in nitric acid in presence of aluminium hydroxide and use of solvent extraction for removal of fluorides and other bulk impurities to make uranium amenable for refining. It is a simple process requiring minimum process step and has advantage of lesser plant corrosion. This process can be applied for processing of uranium tetrafluoride generated from various sources like uranium by-product during thorium recovery from thorium concentrate, first stage product of uranium recovery from phosphoric acid by OPPA process and off grade uranium tetrafluoride material. The paper describes the details of the process developed and demonstrated on bench and pilot scale and its subsequent modification arising out of bulky solid waste generation. The modified process uses a lower quantity of aluminium hydroxide by allowing a lower dissolution of uranium per cycle and recycles the undissolved material to the next cycle, maintaining the overall recovery at high level. This innovation has reduced the solid waste generated by a factor of four at the cost of a slightly larger dissolution vessel and its increased corrosion rate. (author). 4 refs., 1 fig., 3 tabs.

  2. Recovery of uranium from crude uranium tetrafluoride

    International Nuclear Information System (INIS)

    Ghosh, S.K.; Bellary, M.P.; Keni, V.S.

    1994-01-01

    An innovative process has been developed for recovery of uranium from crude uranium tetrafluoride cake. The process is based on direct dissolution of uranium tetrafluoride in nitric acid in presence of aluminium hydroxide and use of solvent extraction for removal of fluorides and other bulk impurities to make uranium amenable for refining. It is a simple process requiring minimum process step and has advantage of lesser plant corrosion. This process can be applied for processing of uranium tetrafluoride generated from various sources like uranium by-product during thorium recovery from thorium concentrate, first stage product of uranium recovery from phosphoric acid by OPPA process and off grade uranium tetrafluoride material. The paper describes the details of the process developed and demonstrated on bench and pilot scale and its subsequent modification arising out of bulky solid waste generation. The modified process uses a lower quantity of aluminium hydroxide by allowing a lower dissolution of uranium per cycle and recycles the undissolved material to the next cycle, maintaining the overall recovery at high level. This innovation has reduced the solid waste generated by a factor of four at the cost of a slightly larger dissolution vessel and its increased corrosion rate. (author)

  3. Effects of Microwave Radiation on Oil Recovery

    Science.gov (United States)

    Esmaeili, Abdollah

    2011-12-01

    A variety of oil recovery methods have been developed and applied to mature and depleted reservoirs in order to improve the efficiency. Microwave radiation oil recovery method is a relatively new method and has been of great interest in the recent years. Crude oil is typically co-mingled with suspended solids and water. To increase oil recovery, it is necessary to remove these components. The separation of oil from water and solids using gravitational settling methods is typically incomplete. Oil-in-water and oil-water-solid emulsions can be demulsified and separated into their individual layers by microwave radiation. The data also show that microwave separation is faster than gravity separation and can be faster than conventional heating at many conditions. After separation of emulsion into water and oil layers, water can be discharged and oil is collected. High-frequency microwave recycling process can recover oil and gases from oil shale, residual oil, drill cuttings, tar sands oil, contaminated dredge/sediments, tires and plastics with significantly greater yields and lower costs than are available utilizing existing known technologies. This process is environmentally friendly, fuel-generating recycler to reduce waste, cut emissions, and save energy. This paper presents a critical review of Microwave radiation method for oil recovery.

  4. Economic valuation of the environmental impact of logging residue recovery and nutrient compensation

    International Nuclear Information System (INIS)

    Boerjesson, P.

    2000-01-01

    In this paper, the environmental impact of logging residue recovery (LRR) and nutrient compensation (NC) in Sweden is analysed and evaluated economically. Logging reside recovery and recirculation of wood ash can generate local environmental benefits, such as reduced soil acidification and, primarily in southern Sweden, also improved nitrogen balance and reduced nutrient leaching from forest land. Recovery of residues leads to a slight increase in net emissions of carbon dioxide, compared with on site decomposition, but this increase is small compared with the net emissions of carbon dioxide from fossil fuel cycles. The impact of toxic compounds is estimated to be insignificant, as is that on biodiversity, when current guidelines for forestry management methods are followed. The total cost, including direct costs and environmental costs/benefits, of LRR and NC is estimated to be about 1.1, 3.3 and 4.6 US dollars/GJ in southern, central and northern Sweden, respectively. For comparison, the current direct cost of LRR, excluding NC, is, on average, about 4.0 US dollars/GJ in Sweden. Almost one-third of the Swedish forest fuel potential is estimated to be located in the south, but this potential varies from about 50 to over 100 PJ per year depending on the assumptions made. Thus, when local environmental benefits are also considered, the overall economic benefit derived from the utilisation of forest fuels could increase significantly in southern Sweden, where large quantities of logging residues are available. (author)

  5. Cost analysis and cost justification of automated data processing in the clinical laboratory.

    Science.gov (United States)

    Westlake, G E

    1983-03-01

    Prospective cost analysis of alternative data processing systems can be facilitated by proper selection of the costs to be analyzed and realistic appraisal of the effect on staffing. When comparing projects with dissimilar cash flows, techniques such as analysis of net present value can be helpful in identifying financial benefits. Confidence and accuracy in prospective analyses will increase as more retrospective studies are published. Several accounts now in the literature describe long-term experience with turnkey laboratory information systems. Acknowledging the difficulty in longitudinal studies, they all report favorable effects on labor costs and recovery of lost charges. Enthusiasm is also expressed for the many intangible benefits of the systems. Several trends suggest that cost justification and cost effectiveness will be more easily demonstrated in the future. These are the rapidly decreasing cost of hardware (with corresponding reduction in service costs) and the entry into the market of additional systems designed for medium to small hospitals. The effect of broadening the sales base may be lower software prices. Finally, operational and executive data management and reporting are destined to become the premier extensions of the LIS for cost justification. Aptly applied, these facilities can promote understanding of costs, control of costs, and greater efficiency in providing laboratory services.

  6. 26 CFR 7.57(d)-1 - Election with respect to straight line recovery of intangibles.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Election with respect to straight line recovery... ACT OF 1976 § 7.57(d)-1 Election with respect to straight line recovery of intangibles. (a) Purpose... Tax Reform Act of 1976. Under this election taxpayers may use cost depletion to compute straight line...

  7. 15 CFR 904.507 - Recovery of certain storage costs.

    Science.gov (United States)

    2010-01-01

    ... fee for expenses to the United States connected with the transfer, board, handling or storage of such... States connected with the storage, care and maintenance of such property. Within a reasonable time after... the bill objects to the reasonableness of the costs assessed he or she may, within 30 days of receipt...

  8. Conceptual design on uranium recovery plant from seawater

    International Nuclear Information System (INIS)

    Kato, Toshiaki; Okugawa, Katsumi; Sugihara, Yutaka; Matsumura, Tsuyoshi

    1999-01-01

    Uranium containing in seawater is extremely low concentration, which is about 3 mg (3 ppb) per 1 ton of seawater. Recently, a report on development of a more effective collector of uranium in seawater (a radiation graft polymerization product of amidoxime onto polyethylene fiber) was issued by Japan Atomic Energy Research Institute. In this paper, an outline design of a uranium recovery plant from seawater was conducted on a base of the collector. As a result of cost estimation, the collection cost of seawater uranium using this method was much higher than that of uranium mine on land and described in the Red Book for mineral uranium cost. In order to make the seawater uranium cost comparable to the on-land uranium cost, it is necessary to establish comprehensive efforts in future technical development, such as development in absorption property of uranium with the collector, resolution method using less HCl, and so forth. (G.K.)

  9. Cost and Systems Analysis of Innovative Fuel Resources Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Erich [Univ. of Texas, Austin, TX (United States). Nuclear and Radiation Engineering Program; Byers, M. [Univ. of Texas, Austin, TX (United States). Nuclear and Radiation Engineering Program

    2017-05-04

    Economically recovered uranium from seawater can have a transformative effect on the way policy makers view the long-term viability of uranium based fuel cycles. Seawater uranium, even when estimated to cost more than terrestrially mined uranium, is integral in establishing an economic backstop, thus reducing uncertainty in future nuclear power costs. While a passive recovery scheme relying on a field of polymer adsorbents prepared via radiation induced grafting has long been considered the leading technology for full scale deployment, non-trivial cost and logistical barriers persist. Consequently, university partners of the nation-wide consortium for seawater uranium recovery have developed variants of this technology, each aiming to address a substantial weakness. The focus of this NEUP project is the economic impacts of the proposed variant technologies. The team at University of Alabama has pursued an adsorbent synthesis method that replaces the synthetic fiber backbone with a natural waste product. Chitin fibers suitable for ligand grafting have been prepared from shrimp shell waste. These environmental benefits could be realized at a comparable cost to the reference fiber so long as the uptake can be increased or the chemical consumption cost decreased.

  10. Decision making model for the recovery of useful material resources from wastes

    International Nuclear Information System (INIS)

    Rising, K.H.; Jensen, G.A.; FitzPatrick, V.F.

    1982-06-01

    In the United States, many of the material resources necessary for energy production are imported. Strategic stockpiling of these resources has been a well-known method for reducing the economic and productivity impact of supply interruption in case of emergency. Another viable option is the recovery of valuable materials and recycle of useful products from wastes generated in energy production and industrial processing. The technical feasibility for recovery and recycle, including decontamination of nuclear-related materials, has been proven and demonstrated. The economic feasibility would depend on both the resale and strategic values of the material, the saving from reusing rather than disposing of the material, the reclamation cost, and other factors that may influence the incentive for recovery and recycle. The purpose of the work presented in this paper is to develop a model to identify the economic and other incentives for the reclamation of useful material resources. Using available data to quantify factors such as strategic and resale values, reclamation cost and disposal cost saving, this model calculates the incentive value consisting of the above factors and selects the appropriate reclamation option. Because this model is empirical, there are limitations to its application. However, within the boundary where the model has been tested, it can be a useful tool for the decision maker to evaluate the economic feasibility of reclamation

  11. Costs of RCRA corrective action: Interim report

    International Nuclear Information System (INIS)

    Tonn, B.; Russell, M.; Hwang Ho-Ling; Goeltz, R.; Warren, J.

    1991-09-01

    This report estimates the cost of the corrective action provisions of the Resource Conservation and Recovery Act (RCRA) for all non-federal facilities in the United States. RCRA is the federal law which regulates the treatment, storage, disposal, and recovery of hazardous waste. The 1984 amendment to RCRA, known as the Hazardous and Solid Waste Amendments, stipulates that facilities that treat, store or dispose of hazardous wastes (TSDs) must remediate situations where hazardous wastes have escaped into the environment from their solid waste management units (SWMUs). The US Environmental Protection Agency (USEPA 1990a), among others, believes that the costs of RCRA corrective action could rival the costs of SUPERFUND. Evaluated herein are costs associated with actual remedial actions. The remedial action cost estimating program developed by CH2M Hill is known as the Cost of Remedial Action Model (CORA). It provides cost estimates, in 1987 dollars, by technology used to remediate hazardous waste sites. Rules were developed to categorize each SWMU in the RTI databases by the kinds of technologies that would be used to remediate them. Results were then run through CORA using various assumptions for variable values that could not be drawn from the RTI databases and that did not have CORA supplied default values. Cost estimates were developed under several scenarios. The base case assumes a TSD and SWMU universe equal to that captured in the RTI databases, a point of compliance at the SWMU boundary with no ability to shift wastes from SWMU to SWMU, and a best-as-practical clean-up to health-based standards. 11 refs., 12 figs., 12 tabs

  12. Spatial cognitive rehabilitation and motor recovery after stroke

    Science.gov (United States)

    Barrett, A.M.; Muzaffar, Tufail

    2014-01-01

    Purpose of review Stroke rehabilitation needs to take major steps forward to reduce functional disability for survivors. In this article, we suggest that spatial retraining might greatly increase the efficiency and efficacy of motor rehabilitation, directly addressing the burden and cost of paralysis after stroke. Recent findings Combining motor and cognitive treatment may be practical, as well as addressing needs after moderate–to-severe stroke. Spatial neglect could suppress motor recovery and reduce motor learning, even when patients receive appropriate rehabilitation to build strength, dexterity, and endurance. Spatial neglect rehabilitation acts to promote motor as well as visual-perceptual recovery. These findings, and previous underemphasized studies, make a strong case for combining spatial neglect treatment with traditional exercise training. Spatial neglect therapies might also help people who cannot participate in intensive movement therapies because of limited strength and endurance after stroke. Summary Spatial retraining, currently used selectively after right brain stroke, may be broadly useful after stroke to promote rapid motor recovery. PMID:25364954

  13. The Role of Dissolved Organic Carbon and Preadaptation in the Biotransformation of Trace Organic Chemicals during Aquifer Recharge and Recovery

    KAUST Repository

    Ouf, Mohamed

    2012-01-01

    Aquifer recharge and recovery (ARR) is a low-cost and environmentally-friendly treatment technology which uses conventionally treated wastewater effluent for groundwater recharge and subsequent recovery for agricultural, industrial or drinking water

  14. Sequential Construction of Costly Networks

    Energy Technology Data Exchange (ETDEWEB)

    Gutfraind, Alexander [Los Alamos National Laboratory

    2011-01-01

    Natural disasters or attacks often disrupt infrastructure networks requiring a costly recovery. This motivates an optimization problem where the objecitve is to construct the nodes of a graph G(V;E), and the cost of each node is dependent on the number of its neighbors previously constructed, or more generally, any properties of the previously-completed subgraph. In this optimization problem the objective is to find a permutation of the nodes which results in the least construction cost. We prove that in the case where the cost of nodes is a convex function in the number of neighbors, the optimal construction sequence is to start at a single node and move outwards. We also introduce algorithms and heuristics for solving various instances of the problem. Those methods can be applied to help reduce the cost of recovering from disasters as well as to plan the deployment of new network infrastructure.

  15. The role of complaint management in the service recovery process.

    Science.gov (United States)

    Bendall-Lyon, D; Powers, T L

    2001-05-01

    Patient satisfaction and retention can be influenced by the development of an effective service recovery program that can identify complaints and remedy failure points in the service system. Patient complaints provide organizations with an opportunity to resolve unsatisfactory situations and to track complaint data for quality improvement purposes. Service recovery is an important and effective customer retention tool. One way an organization can ensure repeat business is by developing a strong customer service program that includes service recovery as an essential component. The concept of service recovery involves the service provider taking responsive action to "recover" lost or dissatisfied customers and convert them into satisfied customers. Service recovery has proven to be cost-effective in other service industries. The complaint management process involves six steps that organizations can use to influence effective service recovery: (1) encourage complaints as a quality improvement tool; (2) establish a team of representatives to handle complaints; (3) resolve customer problems quickly and effectively; (4) develop a complaint database; (5) commit to identifying failure points in the service system; and (6) track trends and use information to improve service processes. Customer retention is enhanced when an organization can reclaim disgruntled patients through the development of effective service recovery programs. Health care organizations can become more customer oriented by taking advantage of the information provided by patient complaints, increasing patient satisfaction and retention in the process.

  16. Downstream extraction process development for recovery of organic acids from a fermentation broth.

    Science.gov (United States)

    Bekatorou, Argyro; Dima, Agapi; Tsafrakidou, Panagiotia; Boura, Konstantina; Lappa, Katerina; Kandylis, Panagiotis; Pissaridi, Katerina; Kanellaki, Maria; Koutinas, Athanasios A

    2016-11-01

    The present study focused on organic acids (OAs) recovery from an acidogenic fermentation broth, which is the main problem regarding the use of OAs for production of ester-based new generation biofuels or other applications. Specifically, 10 solvents were evaluated for OAs recovery from aqueous media and fermentation broths. The effects of pH, solvent/OAs solution ratios and application of successive extractions were studied. The 1:1 solvent/OAs ratio showed the best recovery rates in most cases. Butyric and isobutyric acids showed the highest recovery rates (80-90%), while lactic, succinic, and acetic acids were poorly recovered (up to 45%). The OAs recovery was significantly improved by successive 10-min extractions. Alcohols presented the best extraction performance. The process using repeated extractions with 3-methyl-1-butanol led to the highest OAs recovery. However, 1-butanol can be considered as the most cost-effective option taking into account its price and availability. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Recovery of Indirect Costs in the Pricing of Equitable Adjustments and Terminations for Convenience

    Science.gov (United States)

    1988-05-01

    HORNGREN , COST ACCOUNTING , A MANAGERIAL EMPHASIS, 21 (5th ed. 1982). 2 6FAR Part 31, Contract Cost Principles and Procedures. 2 7 L. ANDERSON...O WOIRECT COSTS /0 5. TYPE OF REPORT & PERIOD COVERED T$0, PEIK~ O ITPA3L-, AO s ~tjQr5 AfJI0 MS THESIS p O12T0MIPJTIOOZ P 0 o, CO V rJiC I rL)C .. S ... Accounting Standards (CAS) 13 C. The Cost Principles 14 D. Measurement of Cost 15 E. Accounting Systems 16 F. Allocation of Costs 17 1. Direct Costs

  18. Possibilities of heat energy recovery from greywater systems

    Science.gov (United States)

    Niewitecka, Kaja

    2018-02-01

    Waste water contains a large amount of heat energy which is irretrievably lost, so it is worth thinking about the possibilities of its recovery. It is estimated that in a residential building with full sanitary fittings, about 70% of the total tap water supplied is discharged as greywater and could be reused. The subject of the work is the opportunity to reuse waste water as an alternative source of heat for buildings. For this purpose, the design of heat exchangers used in the process of greywater heat recovery in indoor sewage systems, public buildings as well as in industrial plants has been reviewed. The possibility of recovering heat from waste water transported in outdoor sewage systems was also taken into consideration. An exemplary waste water heat recovery system was proposed, and the amount of heat that could be obtained using a greywater heat recovery system in a residential building was presented. The work shows that greywater heat recovery systems allow for significant savings in preheating hot tap water, and the rate of cost reimbursement depends on the purpose of the building and the type of installation. At the same time, the work shows that one should adjust the construction solutions of heat exchangers and indoor installations in buildings to the quality of the medium flowing, which is greywater.

  19. Energy sector methane recovery and use: the importance of policy

    Energy Technology Data Exchange (ETDEWEB)

    Tom Kerr; Michelle Hershman

    2009-08-15

    To raise awareness about appropriate policy options to advance methane recovery and use in the energy sector, the IEA has conducted a series of analyses and studies over the past few years. This report continues IEA efforts by providing policy makers with examples and best practices in methane mitigation policy design and implementation. This report offers an overview of four types of methane mitigation projects that have the strongest links to the energy sector: oil and gas methane recovery and reduction of leaks and losses; coal mine methane; landfill methane; and manure methane recovery and use. It identifies successful policies that have been used to advance these important projects. This information is intended to guide policy makers as they search for low-cost, near-term solutions to climate change. 38 refs., 10 figs., 1 app.

  20. Digital innovations and emerging technologies for enhanced recovery programmes

    DEFF Research Database (Denmark)

    Michard, F; Gan, T J; Kehlet, H

    2017-01-01

    Enhanced recovery programmes (ERPs) are increasingly used to improve post-surgical recovery. However, compliance to various components of ERPs-a key determinant of success-remains sub-optimal. Emerging technologies have the potential to help patients and caregivers to improve compliance with ERPs...... of the above-mentioned ERP elements is omitted during the surgical journey.By optimizing compliance to the multiple components of ERPs, digital innovations, non-invasive techniques and wearable sensors have the potential to magnify the clinical and economic benefits of ERPs. Among the growing number...... of technical innovations, studies are needed to clarify which tools and solutions have real clinical value and are cost-effective....

  1. Optimal Control of Diesel Engines with Waste Heat Recovery System

    NARCIS (Netherlands)

    Willems, F.P.T.; Donkers, M.C.F.; Kupper, F.

    2014-01-01

    This study presents an integrated energy and emission management strategy for a Euro-VI diesel engine with Waste Heat Recovery (WHR) system. This Integrated Powertrain Control (IPC) strategy optimizes the CO2-NOx trade-off by minimizing the operational costs associated with fuel and AdBlue

  2. Optimal control of diesel engines with waste heat recovery systems

    NARCIS (Netherlands)

    Willems, F.P.T.; Donkers, M.C.F.; Kupper, F.; Waschl, H.; Kolmanovsky, I.; Steinbuch, M.; Del Re, L.

    2014-01-01

    This study presents an integrated energy and emission management strategy for a Euro-VI diesel engine with Waste Heat Recovery (WHR) system. This Integrated Powertrain Control (IPC) strategy optimizes the CO 2 - NO x trade-off by minimizing the operational costs associated with fuel and AdBlue

  3. Status of RF system for the JAERI energy-recovery linac FEL

    International Nuclear Information System (INIS)

    Sawamura, Masaru; Nagai, Ryoji

    2006-01-01

    The two types of the RF sources are used for the JAERI ERL-FEL. One is an all-solid state amplifier and the other is an inductive output tube (IOT). There are advantages of little failure and wide bandwidth for the all-solid state amplifier, low cost and high efficiency for IOT. The property of low cost with the IOT is suitable for a large machine like an energy recovery linac (ERL)

  4. Review on dog rabies vaccination coverage in Africa: a question of dog accessibility or cost recovery?

    Science.gov (United States)

    Jibat, Tariku; Hogeveen, Henk; Mourits, Monique C M

    2015-02-01

    Rabies still poses a significant human health problem throughout most of Africa, where the majority of the human cases results from dog bites. Mass dog vaccination is considered to be the most effective method to prevent rabies in humans. Our objective was to systematically review research articles on dog rabies parenteral vaccination coverage in Africa in relation to dog accessibility and vaccination cost recovery arrangement (i.e.free of charge or owner charged). A systematic literature search was made in the databases of CAB abstracts (EBSCOhost and OvidSP), Scopus, Web of Science, PubMed, Medline (EBSCOhost and OvidSP) and AJOL (African Journal Online) for peer reviewed articles on 1) rabies control, 2) dog rabies vaccination coverage and 3) dog demography in Africa. Identified articles were subsequently screened and selected using predefined selection criteria like year of publication (viz. ≥ 1990), type of study (cross sectional), objective(s) of the study (i.e. vaccination coverage rates, dog demographics and financial arrangements of vaccination costs), language of publication (English) and geographical focus (Africa). The selection process resulted in sixteen peer reviewed articles which were used to review dog demography and dog ownership status, and dog rabies vaccination coverage throughout Africa. The main review findings indicate that 1) the majority (up to 98.1%) of dogs in African countries are owned (and as such accessible), 2) puppies younger than 3 months of age constitute a considerable proportion (up to 30%) of the dog population and 3) male dogs are dominating in numbers (up to 3.6 times the female dog population). Dog rabies parenteral vaccination coverage was compared between "free of charge" and "owner charged" vaccination schemes by the technique of Meta-analysis. Results indicate that the rabies vaccination coverage following a free of charge vaccination scheme (68%) is closer to the World Health Organization recommended coverage rate

  5. Recovery concept of value metals from automotive lithium-ion batteries

    International Nuclear Information System (INIS)

    Traeger, Thomas; Friedrich, Bernd

    2015-01-01

    A recycling process for automotive lithium-ion batteries was developed. The process combines a mechanical pretreatment with pyrometallurgical recycling process step to recover all battery components, and realize cost-neutral and sustainable recycling. The focus of the research work is the development of a pyrometallurgical process step to recover especially Li out of electrode mass powder which is the fine fraction extracted mechanically from spent Li-ion batteries. Two metallurgical treatment technologies were investigated: direct vacuum evaporation of Li and recovery of metallic Li by distillation, and a selective entraining gas evaporation of Li and recovery of lithium oxide.

  6. Detection and rapid recovery of the Sutter's Mill meteorite fall as a model for future recoveries worldwide

    Science.gov (United States)

    Fries, Marc; Le Corre, Lucille; Hankey, Mike; Fries, Jeff; Matson, Robert; Schaefer, Jake; Reddy, Vishnu

    2014-11-01

    The Sutter's Mill C-type meteorite fall occurred on 22 April 2012 in and around the town of Coloma, California. The exact location of the meteorite fall was determined within hours of the event using a combination of eyewitness reports, weather radar imagery, and seismometry data. Recovery of the first meteorites occurred within 2 days and continued for months afterward. The recovery effort included local citizens, scientists, and meteorite hunters, and featured coordination efforts by local scientific institutions. Scientific analysis of the collected meteorites revealed characteristics that were available for study only because the rapid collection of samples had minimized terrestrial contamination/alteration. This combination of factors—rapid and accurate location of the event, participation in the meteorite search by the public, and coordinated scientific investigation of recovered samples—is a model that was widely beneficial and should be emulated in future meteorite falls. The tools necessary to recreate the Sutter's Mill recovery are available, but are currently underutilized in much of the world. Weather radar networks, scientific institutions with interest in meteoritics, and the interested public are available globally. Therefore, it is possible to repeat the Sutter's Mill recovery model for future meteorite falls around the world, each for relatively little cost with a dedicated researcher. Doing so will significantly increase the number of fresh meteorite falls available for study, provide meteorite material that can serve as the nuclei of new meteorite collections, and will improve the public visibility of meteoritics research.

  7. Potential of Russian Regions to Implement CO2-Enhanced Oil Recovery

    Directory of Open Access Journals (Sweden)

    Alexey Cherepovitsyn

    2018-06-01

    Full Text Available The paper assesses the techno-economic potential of Russia to implement carbon capture and storage technologies that imply the capture of anthropogenic CO2 and its injection into geologic reservoirs for long-term storage. The focus is on CO2 enhanced oil recovery projects that seem to be the most economically promising option of carbon capture and storage. The novelty of the work lies in the formulation of a potential assessment method of CO2 enhanced oil recovery, which allows for establishing a connection between energy production and oil extraction from the viewpoint of CO2 supply and demand. Using linear optimization, the most promising combinations of CO2 sources and sinks are identified and an economic evaluation of these projects is carried out. Based on this information, regions of Russia are ranked according to their prospects in regards to CO2 capture and enhanced oil recovery storage. The results indicate that Russia has a significant potential to utilize its power plants as CO2 sources for enhanced oil recovery projects. It has been estimated that 71 coal-fired power plants, and 185 of the gas-fired power plants of Russia annually produce 297.1 and 309.6 Mt of CO2 that can cover 553.4 Mt of the demand of 322 Russian oil fields. At the same time, the total CO2 storage capacity of the Russian fields is estimated at 7382.6 Mt, however, due to geological and technical factors, only 22.6% can be used for CO2-EOR projects. Of the 183 potential projects identified in the regional analysis phase, 99 were found to be cost-effective, with an average unit cost of € 19.07 per ton of CO2 and a payback period of 8.71 years. The most promising of the estimated regions is characterized by a well-developed energy industry, relatively low transportation costs, numerous large and medium-sized oil fields at the final stages of development, and favorable geological conditions that minimize the cost of injection. Geographically, they are located in the

  8. 7 CFR 625.10 - Cost-share payments.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF... recovery of listed species under the Endangered Species Act (ESA). These protections operate with lands... cost-share assistance. (d) Failure to perform planned management activities can result in violation of...

  9. Composite tube cracking in kraft recovery boilers: A state-of-the-art review

    Energy Technology Data Exchange (ETDEWEB)

    Singbeil, D.L.; Prescott, R. [Pulp and Paper Research Inst. of Canada, Vancouver, British Columbia (Canada); Keiser, J.R.; Swindeman, R.W. [Oak Ridge National Lab., TN (United States)

    1997-07-01

    Beginning in the mid-1960s, increasing energy costs in Finland and Sweden made energy recovery more critical to the cost-effective operation of a kraft pulp mill. Boiler designers responded to this need by raising the steam operating pressure, but almost immediately the wall tubes in these new boilers began to corrode rapidly. Test panels installed in the walls of the most severely corroding boiler identified austenitic stainless steel as sufficiently resistant to the new corrosive conditions, and discussions with Sandvik AB, a Swedish tube manufacturer, led to the suggestion that coextruded tubes be used for water wall service in kraft recovery boilers. Replacement of carbon steel by coextruded tubes has solved most of the corrosion problems experienced by carbon steel wall tubes, however, these tubes have not been problem-free. Beginning in early 1995, a multidisciplinary research program funded by the US Department of Energy was established to investigate the cause of cracking in coextruded tubes and to develop improved materials for use in water walls and floors of kraft recovery boilers. One portion of that program, a state-of-the-art review of public- and private-domain documents related to coextruded tube cracking in kraft recovery boilers is reported here. Sources of information that were consulted for this review include the following: tube manufacturers, boiler manufacturers, public-domain literature, companies operating kraft recovery boilers, consultants and failure analysis laboratories, and failure analyses conducted specifically for this project. Much of the information contained in this report involves cracking problems experienced in recovery boiler floors and those aspects of spout and air-port-opening cracking not readily attributable to thermal fatigue. 61 refs.

  10. The international inspection of a US excess fissile material storage facility with and without remote monitoring: A cost comparison

    International Nuclear Information System (INIS)

    Abrams, M.; Nilsen, C.; Tolk, K.M.; McGilvary, R.C. III

    1996-01-01

    This study estimates the DOE-incurred costs in preparing for and hosting potential IAEA inspections of an excess pit storage facility at the Pantex Site with and without the aid of remote monitoring. Focus was on whether an investment in remote monitoring is recoverable, ie, whether the costs for installing, operating, and maintaining a remote monitoring system (RMS) are overcome by the costs that would be incurred without its use. A baseline RMS incorporating demonstrated technologies is defined and its cost estimated. This estimate and several multiples of it, together with estimates of labor and operational costs incurred under a postulated inspection regime serve as the bases of this study. A key finding is that, for the range of parameters considered, the times for investment recovery are reached relatively quickly, ie, within a decade after the inspection regime's onset. Investment recovery times, expenditures in reaching them, and average annual cost accrual rates are provided as function of RMS initial cost. A guideline indicating when investment recovery is theoretically possible is also provided

  11. Investment recovery program at Niagara Mohawk Power Corporation

    International Nuclear Information System (INIS)

    Kotcamp, R.T.

    1993-01-01

    Niagara Mohawk Power Company's pioneering investment recovery program was initiated in 1984, Its mission is to dispose of company assets classified as obsolete, scrap, surplus, or retired capital equipment that results from company operations or work projects. These assets include items such as scrap wire, pipe, line hardware, transformers, power station equipment, crates of dusty telephone modems and computer monitors, pallets of residential gas and electric meters, a box of toilet paper holders, burned-out light bulbs, chunks of electric cable, brass and copper valves, electric bills from 1952, and a dozen tattered office chairs. It was risky for Niagara Mohawk to commit money to a program that created a scrap company inside a utility and is not the core business. No one regrets the decision to create and expand investment recovery. The program has contributed more than $35,000,000 ($8,140,585 nuclear division) of cash receipts with an additional $5,000,000 of cost avoidance since its inception. The program has credited these dollars back to the operating departments, which has reduced operating costs thereby improving the open-quotes bottom line.close quotes

  12. Investigation of Chemical-Foam Design as a Novel Approach toward Immiscible Foam Flooding for Enhanced Oil Recovery

    NARCIS (Netherlands)

    Hosseini Nasab, S.M.; Zitha, P.L.J.

    2017-01-01

    Strong foam can be generated in porous media containing oil, resulting in incremental oil recovery; however, oil recovery factor is restricted. A large fraction of oil recovered by foam flooding forms an oil-in-water emulsion, so that costly methods may need to be used to separate the oil.

  13. Recovery from schizophrenia and the recovery model.

    Science.gov (United States)

    Warner, Richard

    2009-07-01

    The recovery model refers to subjective experiences of optimism, empowerment and interpersonal support, and to a focus on collaborative treatment approaches, finding productive roles for user/consumers, peer support and reducing stigma. The model is influencing service development around the world. This review will assess whether optimism about outcome from serious mental illness and other tenets of the recovery model are borne out by recent research. Remission of symptoms has been precisely defined, but the definition of 'recovery' is a more diffuse concept that includes such factors as being productive and functioning independently. Recent research and a large, earlier body of data suggest that optimism about outcome from schizophrenia is justified. A substantial proportion of people with the illness will recover completely and many more will regain good social functioning. Outcome is better for people in the developing world. Mortality for people with schizophrenia is increasing but is lower in the developing world. Working appears to help people recover from schizophrenia, and recent advances in vocational rehabilitation have been shown to be effective in countries with differing economies and labor markets. A growing body of research supports the concept that empowerment is an important component of the recovery process. Key tenets of the recovery model - optimism about recovery from schizophrenia, the importance of access to employment and the value of empowerment of user/consumers in the recovery process - are supported by the scientific research. Attempts to reduce the internalized stigma of mental illness should enhance the recovery process.

  14. A statistical approach to electrical storage sizing with application to the recovery of braking energy

    International Nuclear Information System (INIS)

    Musolino, V.; Pievatolo, A.; Tironi, E.

    2011-01-01

    In the context of efficient energy use, electrical energy in electric drives plays a fundamental role. High efficiency energy storage systems permit energy recovery, peak shaving and power quality functions. Due to their cost and the importance of system integration, there is a need for a correct design based on technical-economical optimization. In this paper, a method to design a centralized storage system for the recovery of the power regenerated by a number of electric drives is presented. It is assumed that the drives follow deterministic power cycles, but shifted by an uncertain amount. Therefore the recoverable energy and, consequently, the storage size requires the optimization of a random cost function, embedding both the plant total cost and the saving due to the reduced energy consumption during the useful life of the storage. The underlying stochastic model for the power profile of the drives as a whole is built from a general Markov chain framework. A numerical example, based on Monte Carlo simulations, concerns the maximization of the recoverable potential energy of multiple bridge cranes, supplied by a unique grid connection point and a centralized supercapacitor storage system. -- Highlights: ► Recovery of braking power produced by multiple electric drives. ► Temporal power profile modeled through the multinomial distribution and Markov chains. ► Storage sizing via random cost function optimization. ► The search region for the optimization is given explicitly. ► The value of energy recovered during the useful life of the storage outweighs its cost.

  15. Techno-economic assessment of central sorting at material recovery facilities

    DEFF Research Database (Denmark)

    Cimpan, Ciprian; Maul, Anja; Wenzel, Henrik

    2016-01-01

    sales and sorting residues disposal costs. Material flows through the plants were simulated considering both optimal process conditions and real or typical conditions characterised by downtime and frequent operation at overcapacity. By modelling four plants of progressively higher capacity (size......Simulation of technical and economic performance for materials recovery facilities (MRFs) is a basic requirement for planning new, or evaluating existing, separate waste collection and recycling systems. This study mitigates the current pervasive scarcity of data on process efficiency and costs...... 7 to 21 million EUR and the yearly operational expenditure grew by a factor of 2.4 from 2 to 4.7 million EUR. As a result, specific unit processing cost decreased from 110 to 70 EUR/tonne. Material sales and disposal costs summed to between a net cost of 25 EUR/tonne and net revenue of 50 EUR...

  16. Joint Sparse Recovery With Semisupervised MUSIC

    Science.gov (United States)

    Wen, Zaidao; Hou, Biao; Jiao, Licheng

    2017-05-01

    Discrete multiple signal classification (MUSIC) with its low computational cost and mild condition requirement becomes a significant noniterative algorithm for joint sparse recovery (JSR). However, it fails in rank defective problem caused by coherent or limited amount of multiple measurement vectors (MMVs). In this letter, we provide a novel sight to address this problem by interpreting JSR as a binary classification problem with respect to atoms. Meanwhile, MUSIC essentially constructs a supervised classifier based on the labeled MMVs so that its performance will heavily depend on the quality and quantity of these training samples. From this viewpoint, we develop a semisupervised MUSIC (SS-MUSIC) in the spirit of machine learning, which declares that the insufficient supervised information in the training samples can be compensated from those unlabeled atoms. Instead of constructing a classifier in a fully supervised manner, we iteratively refine a semisupervised classifier by exploiting the labeled MMVs and some reliable unlabeled atoms simultaneously. Through this way, the required conditions and iterations can be greatly relaxed and reduced. Numerical experimental results demonstrate that SS-MUSIC can achieve much better recovery performances than other MUSIC extended algorithms as well as some typical greedy algorithms for JSR in terms of iterations and recovery probability.

  17. Green partial packet recovery in wireless sensor networks

    KAUST Repository

    Daghistani, Anas

    2015-08-18

    Partial packet recovery is well known for increasing network throughput and reducing frame retransmissions. However, partial packet recovery methods in the literature are not energy-aware and hence they are not suitable for the battery powered wireless sensor motes. We propose Green-Frag, a novel adaptive partial packet recovery mechanism that is energy friendly. It can help prolonging the battery life of wireless sensor motes that are usually resource constrained. It dynamically partitions the frame into smaller blocks to avoid dropping the whole frame due to a single bit error. Also, Green-Frag is able to tolerate high interference and save energy by varying the transmit power based on channel quality and interference pattern. We experimentally evaluate the energy efficiency as well as goodput and delay of Green-Frag using our TelosB sensor mote testbed. We find that Green-Frag reduces energy consumption by 33% on average compared to the state of the art partial packet recovery scheme in the literature in the presence of Wi-Fi interference. In the worst case, this reduction in energy consumption comes at the cost of 10% reduction in goodput. Finally, Green-Frag reduces the latency by 22% on average compared to other static frame fragmentation schemes.

  18. 78 FR 74128 - Proposed CERCLA Administrative Cost Recovery Settlement; Cadie Auto Salvage Site, Belvidere...

    Science.gov (United States)

    2013-12-10

    ... Recovery Settlement; Cadie Auto Salvage Site, Belvidere, Boone County, Illinois AGENCY: Environmental... Auto Salvage Site in Belvidere, Boone County, Illinois with the following settling parties: UOP, LLC... Cadie Auto Salvage Site, Belvidere, Boone County, Illinois and EPA Docket No. and should be addressed to...

  19. 78 FR 77673 - Proposed CERCLA Administrative Cost Recovery Settlement; Cadie Auto Salvage Site, Belvidere...

    Science.gov (United States)

    2013-12-24

    ... Recovery Settlement; Cadie Auto Salvage Site, Belvidere, Boone County, Illinois AGENCY: Environmental... Auto Salvage Site in Belvidere, Boone County, Illinois with the following settling party: Helen E... reference the Cadie Auto Salvage Site, Belvidere, Boone County, Illinois and EPA Docket No. and should be...

  20. Design of Hybrid Steam-In Situ Combustion Bitumen Recovery Processes

    International Nuclear Information System (INIS)

    Yang Xiaomeng; Gates, Ian D.

    2009-01-01

    Given enormous capital costs, operating expenses, flue gas emissions, water treatment and handling costs of thermal in situ bitumen recovery processes, improving the overall efficiency by lowering energy requirements, environmental impact, and costs of these production techniques is a priority. Steam-assisted gravity drainage (SAGD) is the most widely used in situ recovery technique in Athabasca reservoirs. Steam generation is done on surface and consequently, because of heat losses, the energy efficiency of SAGD can never be ideal with respect to the energy delivered to the sandface. An alternative to surface steam generation is in situ combustion (ISC) where heat is generated within the formation through injection of oxygen at a sufficiently high pressure to initiate combustion of bitumen. In this manner, the heat from the combustion reactions can be used directly to mobilize the bitumen. As an alternative, the heat can be used to generate steam within the formation which then is the agent to move heat in the reservoir. In this research, alternative hybrid techniques with simultaneous and sequential steam-oxygen injection processes are examined to maximize the thermal efficiency of the recovery process. These hybrid processes have the advantage that during ISC, steam is generated within the reservoir from injected and formation water and as a product of oxidation. This implies that ex situ steam generation requirements are reduced and if there is in situ storage of combustion gases, that overall gas emissions are reduced. In this research, detailed reservoir simulations are done to examine the dynamics of hybrid processes to enable design of these processes. The results reveal that hybrid processes can lower emitted carbon dioxide-to-oil ratio by about 46%, decrease the consumed natural gas-to-oil ratio by about 73%, reduce the cumulative energy-to-oil ratio by between 40% and 70% compared to conventional SAGD, and drop water consumption per unit oil produced

  1. 26 CFR 301.7430-8 - Administrative costs incurred in damage actions for violations of section 362 or 524 of the...

    Science.gov (United States)

    2010-04-01

    ...) In general. The Internal Revenue Service may grant a taxpayer's request for recovery of reasonable... Revenue Service or recovery of damages from the Internal Revenue Service under § 301.7433-2(e). (d) Costs... administrative costs within six months after such request is filed, the Internal Revenue Service's failure to...

  2. Design and analysis of heat recovery system in bioprocess plant

    International Nuclear Information System (INIS)

    Anastasovski, Aleksandar; Rašković, Predrag; Guzović, Zvonimir

    2015-01-01

    Highlights: • Heat integration of a bioprocess plant is studied. • Bioprocess plant produces yeast and ethyl-alcohol. • The design of a heat recovery system is performed by batch pinch analysis. • Direct and indirect heat integration approaches are used in process design. • The heat recovery system without a heat storage opportunity is more profitable. - Abstract: The paper deals with the heat integration of a bioprocess plant which produces yeast and ethyl-alcohol. The referent plant is considered to be a multiproduct batch plant which operates in a semi-continuous mode. The design of a heat recovery system is performed by batch pinch analysis and by the use of the Time slice model. The results obtained by direct and indirect heat integration approaches are presented in the form of cost-optimal heat exchanger networks and evaluated by different thermodynamic and economic indicators. They signify that the heat recovery system without a heat storage opportunity can be considered to be a more profitable solution for the energy efficiency increase in a plant

  3. Practical model for economic optimization of a heat recovery plate heat exchanger and its examination

    Energy Technology Data Exchange (ETDEWEB)

    Lepach, T.; Marttila, E.; Hammo, S.

    1997-12-31

    This report presents a practical model for designers whose job it is to dimension a plate heat exchanger used especially in heat recovery systems for ventilation. Special attention was given to the economic optimization of such a unit. The first part of the report presents the most important types of heat exchangers and then goes on to present those that are normally used in ventilation systems for heat recovery. The second part discusses the operating costs, investments required and the savings in costs that can be achieved through heat recovery. The third part takes a look at the theory of heat transfer and the characteristics of heat exchanger. In the finally part, a utilization of this model is presented. The results from this are discussed in the following. The developed equations have been calculated and plotted by the use of the numeric software MATLAB. The code used for calculation with MATLAB is listed in the appendix. (orig.) 16 refs.

  4. 26 CFR 301.7430-2 - Requirements and procedures for recovery of reasonable administrative costs.

    Science.gov (United States)

    2010-04-01

    ... recovery—(1) Determination by the Internal Revenue Service. The Internal Revenue Service will grant a... such request is filed, the Internal Revenue Service's failure to respond may be considered by the..., the Internal Revenue Service will not grant a request for recovery of the reasonable administrative...

  5. Integrated working fluid-thermodynamic cycle design of organic Rankine cycle power systems for waste heat recovery

    DEFF Research Database (Denmark)

    Cignitti, Stefano; Andreasen, Jesper Graa; Haglind, Fredrik

    2017-01-01

    recovery. Inthis paper, an organic Rankine cycle process and its pure working fluid are designed simultaneously forwaste heat recovery of the exhaust gas from a marine diesel engine. This approach can overcome designissues caused by the high sensitivity between the fluid and cycle design variables......Today, some established working fluids are being phased out due to new international regulations on theuse of environmentally harmful substances. With an ever-increasing cost to resources, industry wants toconverge on improved sustainability through resource recovery, and in particular waste heat...

  6. Dutchess County Resource Recovery Task Force report: Dutchess County Pyrolysis Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    Dutchess County initiated development of a long-range master plan for Solid Waste Management in 1971. The plan included development of a resource recovery facility to service the municipalities in the County population center. Based on early recommendations, a pyrolysis facility employing Purox technology was to be implemented. A feasibility study, paid for by County funds was completed in 1975. The study provided siting recommendations, estimation of available waste, and preliminary facility design. Because of various considerations, the project was not developed. Under the Department of Energy grant, the County reassessed the feasibility of a resource recovery facility, with emphasis on confirming previous conclusions supporting the Purox technology, waste availability, energy recovery and sale and siting of the plant. The conclusions reached in the new study were: a resource recovery facility is feasible for the County; sufficient waste for such a facility is available and subject to control; While Purox technology was feasible it is not the most appropriate available technoloy for the County; that mass burning with steam recovery is the most appropriate technology; and that resource recovery while presently more expensive than landfilling, represents the only cost effective, energy efficient, and environmentally sound way to handle the solid waste problem in the County.

  7. Preparation of recovery fuel - assumptions, quality, technology and cost; Upparbetning av returbraenslen - foerutsaettningar, kvalite, teknik och kostnader

    Energy Technology Data Exchange (ETDEWEB)

    Njurell, Rolf; Gyllenhammar, Marianne [SEP Scandinavian Energy Project AB, Goeteborg (Sweden)

    2000-05-01

    New laws and restrictions, in Sweden and within the EU, will change the handling of waste within the next years. The combustible wastes going to landfill today, have to be dealt with in another way in the future. The knowledge about fuel preparation has been accentuated. Preparation of wastes - properly executed - will make it a useful fuel and increase energy recovery. S.E.P. Scandinavian Energy Project AB has by the assignment of the Thermal Engineering Research Institute made this survey of required conditions technology and quality costs related to fuel preparation of recovered waste like wood, paper and plastic. Only a few fuel preparation plants for recovered waste exist in Sweden today. Most of the municipalities do not have any waste treatment except for landfill. In the future regional preparation plants will most likely be built. In that way recovered wastes can be treated in a cost-effective way and be converted into useful fuel. Transportation will increase when landfills, presently in use, will close and the waste has to be transported to regional plants. Recovered fuel can be divided into two types depending on their content. Recovered Wood Fuel is what we call RWF in this report. Recovered Commercial waste Fuel containing plastic, paper, textiles etc, is called RCF in this report. To receive a suitable fuel for a special combustion plant, the nature, quality and content of the fuel must be known. The choice of preparation equipment is guided both by the type of waste and the quality of fuel needed for the combustion plant. Different contaminations in waste are presented in the report, together with technology to separate them from the fuel. The report also focuses on some type of equipment that are available for fuel preparation in different applications. In general the waste has to be shredded or crushed and the tramp iron has to be removed. If required the waste also has to be screened. The non waste incineration plants firing RWF today and intend

  8. 10 CFR 603.575 - Repayment of Federal cost share.

    Science.gov (United States)

    2010-01-01

    ... Business Evaluation Accounting, Payments, and Recovery of Funds § 603.575 Repayment of Federal cost share. In accordance with the Energy Policy Act of 2005 (Public Law 109-58), section 988(e), the contracting...

  9. Joint recovery programme versus usual care - An economic evaluation of a clinical pathway for joint replacement surgery

    NARCIS (Netherlands)

    Brunenberg, DE; van Steyn, MJ; Sluimer, JC; Bekebrede, LL; Bulstra, SK; Joore, MA

    2005-01-01

    Objective: The objective of the present study was to determine the incremental cost-effectiveness of a clinical pathway for patients undergoing joint replacement, the Joint Recovery Programme (JRP), as compared with usual care. The existing care process was revised to contain costs and shorten

  10. Exergy costs analysis of water desalination and purification techniques by transfer functions

    International Nuclear Information System (INIS)

    Carrasquer, Beatriz; Martínez-Gracia, Amaya; Uche, Javier

    2016-01-01

    Highlights: • A procedure to estimate the unit exergy cost of water treatment techniques is provided. • Unit exergy costs of water purification and desalination are given as a function of design and operating parameters. • Unit exergy costs range from 3.3 to 6.8 in purification and from 2 to 26 in desalination. • They could be used in their preliminary design as good indicators of their energy efficiency. - Abstract: The unit exergy costs of desalination and purification, which are two alternatives commonly used for water supply and treatment, have been characterized as a function of the energy efficiency of the process by combining the Exergy Cost Analysis with Transfer Function Analysis. An equation to assess the exergy costs of these alternatives is then proposed as a quick guide to know the energy efficiency of any water treatment process under different design and operating conditions. This combination, was satisfactory applied to groundwaters and water transfers. After identifying the boundaries of the system, input and output flows are calculated in exergy values. Next, different examples are analyzed in order to propose a generic equation to assess the exergy cost of the water restoration technologies, attending to their main features. Recovery ratio, energy requirements and salts concentrations (for desalination), and plant capacity and organic matter recovery (for water purification) are introduced in the calculations as their main endogenous parameters. Values obtained for typical operation ranges of commercial plants showed that unit exergy costs of water purification ranged from 3.3 to 6.8; maximum values, as expected, were found at low plant capacities and high organic matter removal ratios. For water desalination, values varied from 2 to 7 in membrane technologies and from 10 to 26 in thermal processes. The recovery ratio and salts concentration in raw water increased the unit exergy costs in membrane techniques. In distillation processes

  11. Recovery in SoccerPart II—Recovery Strategies

    OpenAIRE

    Nedelec, Mathieu; McCall, Alan; Carling, Chris; Legall, Franck; Berthoin, Serge; Dupont, Grégory

    2013-01-01

    International audience; In the formerly published part I of this two-part review, we examined fatigue after soccer matchplay and recovery kinetics of physical performance, and cognitive, subjective and biological markers. To reduce the magnitude of fatigue and to accelerate the time to fully recover after completion, several recovery strategies are now used in professional soccer teams. During congested fixture schedules, recovery strategies are highly required to alleviate post-match fatigue...

  12. Methods of tritium recovery from molten lithium

    International Nuclear Information System (INIS)

    Farookhi, R.; Rogers, J.E.

    1968-01-01

    It is important to keep the tritium inventory in a blanket of a thermonuclear reactor at a low level both to eliminate possible hydriding of structural components and to reduce inventory cost. Removing the tritium from a lithium blanket by fractional distillation, flash vaporization, and fractional crystallization was investigated. No definitive data are available either on the vapor-liquid equilibrium between lithium and tritium at low T 2 concentrations, or on the rate of formation and decomposition of lithium tritide. The final distinction between the recovery systems discussed in this report will depend on such data, but presently distillation appears to be the best alternate to the diffusion scheme proposed by A.P. Fraas. The capital cost of equipment necessary to remove tritium by distillation appears to be greater than 10 million dollars for a 5000 MW system, whereas the capital cost associated with the diffusion process has been estimated to be 4 million dollars

  13. Cost-assessment Analysis of Local Vehicle Scrapping Facility

    Science.gov (United States)

    Grabowski, Lukasz; Gliniak, Maciej; Polek, Daria; Gruca, Maria

    2017-12-01

    The purpose of the paper was to analyse the costs of recycling vehicles at local vehicle scrapping facility. The article contains regulations concerning vehicle decommissioning, describes the types of recovery, vehicles recycling networks, analyses the structure of a disassembly station, as well as the financial and institutional system in charge of dealing with the recycling of vehicles in Poland. The authors present the number of scrapped vehicles at local recycling company and the level of achieved recovery and recycling. The research presented in the article shows financial situation of the vehicle scrapping industry. In addition, it has been observed that the number of subsidies are directly proportional to the number of scrapped vehicles, and achieved levels of recycling and recovery depends on the percentage of incomplete vehicles.

  14. 76 FR 77528 - Proposed CERCLA Administrative Cost Recovery Settlement; North Hollywood Operable Unit of the San...

    Science.gov (United States)

    2011-12-13

    ...In accordance with Section 122(i) of the Comprehensive Environmental Response, Compensation, and Liability Act, as amended (``CERCLA''), 42 U.S.C. 9622(i), notice is hereby given of a proposed administrative settlement for recovery of response costs concerning the North Hollywood Operable Unit of the San Fernando Valley Area 1 Superfund Site, located in the vicinity of Los Angeles, California, with the following settling parties: Pick-Your-Part Auto Wrecking; Hayward Associates, LLC; and PNM Properties, LLC. The settlement requires the settling parties to pay a total of $102,161 to the North Hollywood Operable Unit Special Account within the Hazardous Substance Superfund. The settlement also includes a covenant not to sue the settling parties pursuant to Section 107(a) of CERCLA, 42 U.S.C. 9607(a). For thirty (30) days following the date of publication of this notice, the Agency will receive written comments relating to the settlement. The Agency will consider all comments received and may modify or withdraw its consent to the settlement if comments received disclose facts or considerations which indicate that the settlement is inappropriate, improper, or inadequate. The Agency's response to any comments received will be available for public inspection at the City of Los Angeles Central Library, Science and Technology Department, 630 West 5th Street, Los Angeles, CA 90071 and at the EPA Region 9 Superfund Records Center, Mail Stop SFD-7C, 95 Hawthorne Street, Room 403, San Francisco, CA 94105.

  15. 76 FR 79678 - Proposed CERCLA Administrative Cost Recovery Settlement; North Hollywood Operable Unit of the San...

    Science.gov (United States)

    2011-12-22

    ...In accordance with Section 122(i) of the Comprehensive Environmental Response, Compensation, and Liability Act, as amended (``CERCLA''), 42 U.S.C. 9622(i), notice is hereby given of a proposed administrative settlement for recovery of response costs concerning the North Hollywood Operable Unit of the San Fernando Valley Area 1 Superfund Site, located in the vicinity of Los Angeles, California, with the following settling parties: Pick-Your-Part Auto Wrecking; Hayward Associates, LLC; and PNM Properties, LLC. The settlement requires the settling parties to pay a total of $102,161 to the North Hollywood Operable Unit Special Account within the Hazardous Substance Superfund. The settlement also includes a covenant not to sue the settling parties pursuant to Section 107(a) of CERCLA, 42 U.S.C. 9607(a). For thirty (30) days following the date of publication of this notice, the Agency will receive written comments relating to the settlement. The Agency will consider all comments received and may modify or withdraw its consent to the settlement if comments received disclose facts or considerations which indicate that the settlement is inappropriate, improper, or inadequate. The Agency's response to any comments received will be available for public inspection at the City of Los Angeles Central Library, Science and Technology Department, 630 West 5th Street, Los Angeles, CA 90071 and at the EPA Region 9 Superfund Records Center, Mail Stop SFD-7C, 95 Hawthorne Street, Room 403, San Francisco, CA 94105.

  16. 77 FR 123 - Proposed CERCLA Administrative Cost Recovery Settlement; North Hollywood Operable Unit of the San...

    Science.gov (United States)

    2012-01-03

    ...In accordance with Section 122(i) of the Comprehensive Environmental Response, Compensation, and Liability Act, as amended (``CERCLA''), 42 U.S.C. 9622(i), notice is hereby given of a proposed administrative settlement for recovery of response costs concerning the North Hollywood Operable Unit of the San Fernando Valley Area 1 Superfund Site, located in the vicinity of Los Angeles, California, with the following settling party: Waste Management Recycling & Disposal Services of California, Inc., dba Bradley Landfill & Recycling Center. The settlement requires the settling party to pay a total of $185,734 to the North Hollywood Operable Unit Special Account within the Hazardous Substance Superfund. The settlement also includes a covenant not to sue the settling party pursuant to Section 107(a) of CERCLA, 42 U.S.C. 9607(a). For thirty (30) days following the date of publication of this notice, the Agency will receive written comments relating to the settlement. The Agency will consider all comments received and may modify or withdraw its consent to the settlement if comments received disclose facts or considerations which indicate that the settlement is inappropriate, improper, or inadequate. The Agency's response to any comments received will be available for public inspection at the City of Los Angeles Central Library, Science and Technology Department, 630 West 5th Street, Los Angeles CA 90071 and at the EPA Region 9 Superfund Records Center, Mail Stop SFD-7C, 95 Hawthorne Street, Room 403, San Francisco, CA 94105.

  17. Principles of heavy oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Szasz, S.E.; Thomas, G.W.

    1965-10-01

    Rising exploration costs have prompted greater interest in the large known deposits of heavy oil in North America. Because of high oil viscosities in such reservoirs, recoveries are poor, fluid drives are inefficient and production rates are uneconomical. Viscosity reduction can best be accomplished by heating the reservoir. The basic aspects of reservoir heating are reviewed and those processes which are of practical importance in heavy oil reservoirs are discussed. Wellbore heating frequently can be applied to heavy oil reservoirs to increase production rates. In hot waterflooding, the water requirements are much higher than an ordinary waterflood. Steam floods are more attractive, but operating costs are generally high. Conduction heating processes appear most promising. Among these is included the cyclic steam-soak process. A simple method is presented for estimating the performance from the first cycle of steam injection into the formation, assuming gravity as the only driving energy. An example calculation for a typical heavy oil reservoir is given. (26 refs.)

  18. Recovery from cannabis use disorders: Abstinence versus moderation and treatment-assisted recovery versus natural recovery.

    Science.gov (United States)

    Stea, Jonathan N; Yakovenko, Igor; Hodgins, David C

    2015-09-01

    The present study of recovery from cannabis use disorders was undertaken with 2 primary objectives that address gaps in the literature. The first objective was to provide an exploratory portrait of the recovery process from cannabis use disorders, comparing individuals who recovered naturally with those who were involved in treatment. The second objective was to explore systematically the similarities and differences between abstinence and moderation recoveries. Adults who have recovered from a cannabis use disorder were recruited in the community (N = 119). The abstinence and treatment-assisted participants exhibited higher levels of lifetime cannabis problem severity than the moderation and natural recovery participants, respectively. As well, cognitive factors were identified as the most useful strategies for recovery (e.g., thinking about benefits and negative consequences of cannabis), followed by behavioral factors (e.g., avoidance of triggers for use and high-risk situations). Findings lend further support to the effectiveness of cognitive, motivational, and behavioral strategies as helpful actions and maintenance factors involved in the recovery process. The findings also generally support the idea that cannabis use disorders lie on a continuum of problem severity, with moderation and natural recoveries more likely to occur at the lower end of the continuum and abstinence and treatment-assisted recoveries more likely to occur at the upper end. (c) 2015 APA, all rights reserved).

  19. Recovery Act: Low Cost Integrated Substrate for OLED Lighting Development

    Energy Technology Data Exchange (ETDEWEB)

    Benton, Scott [PPG Industries, Inc., Pittsburgh, PA (United States); Bhandari, Abhinav [PPG Industries, Inc., Pittsburgh, PA (United States)

    2012-12-26

    PPG pursued the development of an integrated substrate, including the anode, external, and internal extraction layers. The objective of PPG's program was to achieve cost reductions by displacing the existing expensive borosilicate or double-side polished float glass substrates and developing alternative electrodes and scalable light extraction layer technologies through focused and short-term applied research. One of the key highlights of the project was proving the feasibility of using PPG's high transmission Solarphire® float glass as a substrate to consistently achieve organic lightemitting diode (OLED) devices with good performance and high yields. Under this program, four low-cost alternatives to the Indium Tin Oxide (ITO) anode were investigated using pilot-scale magnetron sputtered vacuum deposition (MSVD) and chemical vapor deposition (CVD) technologies. The anodes were evaluated by fabricating small and large phosphorescent organic lightemitting diode (PHOLED) devices at Universal Display Corporation (UDC). The device performance and life-times comparable to commercially available ITO anodes were demonstrated. A cost-benefit analysis was performed to down-select two anodes for further low-cost process development. Additionally, PPG developed and evaluated a number of scalable and compatible internal and external extraction layer concepts such as scattering layers on the outside of the glass substrate or between the transparent anode and the glass interface. In one external extraction layer (EEL) approach, sol-gel sprayed pyrolytic coatings were deposited using lab scale equipment by hand or automated spraying of sol-gel solutions on hot glass, followed by optimizing of scattering with minimal absorption. In another EEL approach, PPG tested large-area glass texturing by scratching a glass surface with an abrasive roller and acid etching. Efficacy enhancements of 1.27x were demonstrated using white PHOLED devices for 2.0mm substrates which are

  20. 78 FR 40104 - Endangered and Threatened Species; Notice of Intent To Prepare a Recovery Plan for Pacific Eulachon

    Science.gov (United States)

    2013-07-03

    ... Coordinator. Business hours are 8 a.m. to 5 p.m. Monday through Friday, except Federal holidays. Via fax: 503... threats; (b) estimates of the time and cost to implement recovery actions; (c) critical knowledge gaps and/or uncertainties that need to be resolved to better inform recovery efforts; and (d) research...

  1. 18 CFR 2.25 - Ratemaking treatment of the cost of emissions allowances in coordination transactions.

    Science.gov (United States)

    2010-04-01

    ... the cost of emissions allowances in coordination transactions. 2.25 Section 2.25 Conservation of Power... § 2.25 Ratemaking treatment of the cost of emissions allowances in coordination transactions. (a... Commission provides for recovery of variable costs on an incremental basis, the Commission will allow...

  2. A cost-benefit analysis of landfill mining and material recycling in China

    International Nuclear Information System (INIS)

    Zhou, Chuanbin; Gong, Zhe; Hu, Junsong; Cao, Aixin; Liang, Hanwen

    2015-01-01

    Highlights: • Assessing the economic feasibility of landfill mining. • We applied a cost-benefit analysis model for landfill mining. • Four material cycling and energy recovery scenarios were designed. • We used net present value to evaluate the cost-benefit efficiency. - Abstract: Landfill mining is an environmentally-friendly technology that combines the concepts of material recycling and sustainable waste management, and it has received a great deal of worldwide attention because of its significant environmental and economic potential in material recycling, energy recovery, land reclamation and pollution prevention. This work applied a cost-benefit analysis model for assessing the economic feasibility, which is important for promoting landfill mining. The model includes eight indicators of costs and nine indicators of benefits. Four landfill mining scenarios were designed and analyzed based on field data. The economic feasibility of landfill mining was then evaluated by the indicator of net present value (NPV). According to our case study of a typical old landfill mining project in China (Yingchun landfill), rental of excavation and hauling equipment, waste processing and material transportation were the top three costs of landfill mining, accounting for 88.2% of the total cost, and the average cost per unit of stored waste was 12.7 USD ton −1 . The top three benefits of landfill mining were electricity generation by incineration, land reclamation and recycling soil-like materials. The NPV analysis of the four different scenarios indicated that the Yingchun landfill mining project could obtain a net positive benefit varying from 1.92 million USD to 16.63 million USD. However, the NPV was sensitive to the mode of land reuse, the availability of energy recovery facilities and the possibility of obtaining financial support by avoiding post-closure care

  3. A cost-benefit analysis of landfill mining and material recycling in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Chuanbin, E-mail: cbzhou@rcees.ac.cn; Gong, Zhe; Hu, Junsong; Cao, Aixin; Liang, Hanwen

    2015-01-15

    Highlights: • Assessing the economic feasibility of landfill mining. • We applied a cost-benefit analysis model for landfill mining. • Four material cycling and energy recovery scenarios were designed. • We used net present value to evaluate the cost-benefit efficiency. - Abstract: Landfill mining is an environmentally-friendly technology that combines the concepts of material recycling and sustainable waste management, and it has received a great deal of worldwide attention because of its significant environmental and economic potential in material recycling, energy recovery, land reclamation and pollution prevention. This work applied a cost-benefit analysis model for assessing the economic feasibility, which is important for promoting landfill mining. The model includes eight indicators of costs and nine indicators of benefits. Four landfill mining scenarios were designed and analyzed based on field data. The economic feasibility of landfill mining was then evaluated by the indicator of net present value (NPV). According to our case study of a typical old landfill mining project in China (Yingchun landfill), rental of excavation and hauling equipment, waste processing and material transportation were the top three costs of landfill mining, accounting for 88.2% of the total cost, and the average cost per unit of stored waste was 12.7 USD ton{sup −1}. The top three benefits of landfill mining were electricity generation by incineration, land reclamation and recycling soil-like materials. The NPV analysis of the four different scenarios indicated that the Yingchun landfill mining project could obtain a net positive benefit varying from 1.92 million USD to 16.63 million USD. However, the NPV was sensitive to the mode of land reuse, the availability of energy recovery facilities and the possibility of obtaining financial support by avoiding post-closure care.

  4. A Cost-Effectiveness Analysis for Incineration or Recycling of Dutch Household Plastics

    NARCIS (Netherlands)

    R.H.J.M. Gradus (Raymond); R. van Koppen (Rick); E. Dijkgraaf (Elbert); P. Nillesen (Paul)

    2016-01-01

    textabstractThe cost-effectiveness of plastic recycling is compared to energy recovery from plastic incineration in a waste-to-energy plant using data for the Netherlands. Both options have specific benefits and costs. The benefits of recycling are the avoidance of both CO2 that otherwise would be

  5. From recovery values to recovery-oriented practice?

    DEFF Research Database (Denmark)

    Dalum, Helle; Pedersen, Inge Kryger; Cunningham, Harry

    2015-01-01

    Introduction: The recovery model has influenced mental health services and fostered new standards for best practice. However, knowledge about how mental health care professionals (HCPs) experience recoveryoriented programs is sparse. Aim/Question: This paper explores HCPs' experiences when...... facilitating a recovery-oriented rehabilitation program. The research question is howdo HCPs experience a change in their attitude and practicewhen applying recovery-oriented programs? Methods: This paper draws on semi-structured in-depth qualitative interviews conducted with 16 HCPs experienced...... in facilitating a recovery-oriented rehabilitation program in either the USA or Denmark. Results: Three themes emerged from the HCPs' reflections on changes in attitudes and practices: “Hopeful Attitude” captures a change in the HCPs' attitude toward a more positive view on the future for clients' living...

  6. The Vessel Schedule Recovery Problem (VSRP) – A MIP model for handling disruptions in liner shipping

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Dirksen, Jakob; Pisinger, David

    2013-01-01

    or even omitting one. We present the Vessel Schedule Recovery Problem (VSRP) to evaluate a given disruption scenario and to select a recovery action balancing the trade off between increased bunker consumption and the impact on cargo in the remaining network and the customer service level. It is proven...... due to adverse weather conditions, port contingencies, and many other issues. A common scenario for recovering a schedule is to either increase the speed at the cost of a significant increase in the fuel consumption or delaying cargo. Advanced recovery options might exist by swapping two port calls...... that the VSRP is NP-hard. The model is applied to four real life cases from Maersk Line and results are achieved in less than 5seconds with solutions comparable or superior to those chosen by operations managers in real life. Cost savings of up to 58% may be achieved by the suggested solutions compared...

  7. Condensate recovery by cycling at declining pressures

    Energy Technology Data Exchange (ETDEWEB)

    Havlena, Z G; Griffith, J D; Pot, R; Kiel, O G

    1967-06-05

    Cycling condensate reservoirs under conditions of declining pressure, rather than constant pressure, is advantageous from both a recovery and an economic standpoint. Wet gas displaced from the swept areas is recovered concurrently with wet gas recovered by gas expansion from the unswept portions of the reservoir. Any liquid condensed in the swept areas is revaporized by dry injection gas and recovered as an enriched gas. By this mode of operation, high condensate recovery is obtained, gas sales may be possible at an earlier stage of depletion, more flexibility in field and plant operations is feasible and reduction of 15% in investment and operating costs is achieved. Injection gas requirements are reduced by 40%. The Windfall reservoir in Canada has been successfully produced in this manner, starting in 1962. It is a typical retrograde type reservoir which in 1965 represented 15% of reservoirs exploited in North America.

  8. Large scale carbon dioxide production from coal-fired power stations for enhanced oil recovery: a new economic feasibility study

    International Nuclear Information System (INIS)

    Tontiwachwuthikul, P.; Chan, C. W.; Kritpiphat, W.; Demontigny, D.; Skoropad, D.; Gelowitz, D.; Aroonwilas, A.; Mourits, F.; Wilson, M.; Ward, L.

    1998-01-01

    The concept of capturing carbon dioxide from fossil-fuelled electric power generating plants and utilizing it as a flooding agent in enhanced oil recovery (EOR) processes, was explored. In this context, this paper describes how cogeneration concepts, together with process optimization strategies, help to reduce the carbon dioxide production cost by utilizing low-pressure steam and waste heat from various sections of the power generation process. Based on these optimization strategies, the recovery cost of carbon dioxide from coal-fired power stations is estimated to be in the range of $ 0.50 to $ 2.00/mscf. Assuming an average cost of $ 1.25/mscf, the production cost of incremental oil would be about $ 18.00. This means that even with today's modest oil prices, there is room for profit to be made operating a carbon dioxide flood with flue gas extracted carbon dioxide

  9. Lumber recovery from small-diameter ponderosa pine from Flagstaff, Arizona

    Science.gov (United States)

    Eini C. Lowell; David W. Green

    2001-01-01

    Thousands of acres of densely stocked ponderosa pine forests surround Flagstaff, AZ. These stands are at high risk of fire, insect, and disease outbreak. Stand density management activity can be expensive, but product recovery from the thinned material could help defray removal costs. This project evaluated the yield and economic return of lumber recovered from small-...

  10. Prospects for Increased Energy Recovery from Horse Manure—A Case Study of Management Practices, Environmental Impact and Costs

    Directory of Open Access Journals (Sweden)

    Åsa Hadin

    2017-11-01

    Full Text Available A transition to renewable energy sources and a circular economy has increased interest in renewable resources not usually considered as energy sources or plant nutrient resources. Horse manure exemplifies this, as it is sometimes recycled but not often used for energy purposes. The purpose of this study was to explore horse manure management in a Swedish municipality and prospects for energy recovery. The case study includes a survey of horse manure practices, environmental assessment of horse manure treatment in a biogas plant, including associated transport, compared to on-site unmanaged composting, and finally a simplified economic analysis. It was found that horse manure management was characterized by indoor collection of manure most of the year and storage on concrete slabs or in containers, followed by direct application on arable land. Softwood was predominantly used as bedding, and bedding accounted for a relatively small proportion (13% of the total mix. Anaerobic digestion was indicated to reduce potential environmental impact in comparison to unmanaged composting, mainly due to biogas substituting use of fossil fuels. The relative environmental impact from transport of manure from horse facilities to anaerobic digestion plant was small. Results also indicate a relatively high cost for horse keepers to change from composting on site to anaerobic digestion in a centralized plant.

  11. Pushing desalination recovery to the maximum limit: Membrane and thermal processes integration

    KAUST Repository

    Shahzad, Muhammad Wakil

    2017-05-05

    The economics of seawater desalination processes has been continuously improving as a result of desalination market expansion. Presently, reverse osmosis (RO) processes are leading in global desalination with 53% share followed by thermally driven technologies 33%, but in Gulf Cooperation Council (GCC) countries their shares are 42% and 56% respectively due to severe feed water quality. In RO processes, intake, pretreatment and brine disposal cost 25% of total desalination cost at 30–35% recovery. We proposed a tri-hybrid system to enhance overall recovery up to 81%. The conditioned brine leaving from RO processes supplied to proposed multi-evaporator adsorption cycle driven by low temperature industrial waste heat sources or solar energy. RO membrane simulation has been performed using WinFlow and IMSDesign commercial softwares developed by GE and Nitto. Detailed mathematical model of overall system is developed and simulation has been conducted in FORTRAN. The final brine reject concentration from tri-hybrid cycle can vary from 166,000ppm to 222,000ppm if RO retentate concentration varies from 45,000ppm to 60,000ppm. We also conducted economic analysis and showed that the proposed tri-hybrid cycle can achieve highest recovery, 81%, and lowest energy consumption, 1.76kWhelec/m3, for desalination reported in the literature up till now.

  12. Waste Management Facilities Cost Information Report

    Energy Technology Data Exchange (ETDEWEB)

    Feizollahi, F.; Shropshire, D.

    1992-10-01

    The Waste Management Facility Cost Information (WMFCI) Report, commissioned by the US Department of Energy (DOE), develops planning life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities. This report contains PLCC estimates versus capacity for 26 different facility cost modules. A procedure to guide DOE and its contractor personnel in the use of estimating data is also provided. Estimates in the report apply to five distinctive waste streams: low-level waste, low-level mixed waste, alpha contaminated low-level waste, alpha contaminated low-level mixed waste, and transuranic waste. The report addresses five different treatment types: incineration, metal/melting and recovery, shredder/compaction, solidification, and vitrification. Data in this report allows the user to develop PLCC estimates for various waste management options.

  13. Waste Management Facilities Cost Information Report

    International Nuclear Information System (INIS)

    Feizollahi, F.; Shropshire, D.

    1992-10-01

    The Waste Management Facility Cost Information (WMFCI) Report, commissioned by the US Department of Energy (DOE), develops planning life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities. This report contains PLCC estimates versus capacity for 26 different facility cost modules. A procedure to guide DOE and its contractor personnel in the use of estimating data is also provided. Estimates in the report apply to five distinctive waste streams: low-level waste, low-level mixed waste, alpha contaminated low-level waste, alpha contaminated low-level mixed waste, and transuranic waste. The report addresses five different treatment types: incineration, metal/melting and recovery, shredder/compaction, solidification, and vitrification. Data in this report allows the user to develop PLCC estimates for various waste management options

  14. A novel process for recovery of fermentation-derived succinic acid: process design and economic analysis.

    Science.gov (United States)

    Orjuela, Alvaro; Orjuela, Andrea; Lira, Carl T; Miller, Dennis J

    2013-07-01

    Recovery and purification of organic acids produced in fermentation constitutes a significant fraction of total production cost. In this paper, the design and economic analysis of a process to recover succinic acid (SA) via dissolution and acidification of succinate salts in ethanol, followed by reactive distillation to form succinate esters, is presented. Process simulation was performed for a range of plant capacities (13-55 million kg/yr SA) and SA fermentation titers (50-100 kg/m(3)). Economics were evaluated for a recovery system installed within an existing fermentation facility producing succinate salts at a cost of $0.66/kg SA. For a SA processing capacity of 54.9 million kg/yr and a titer of 100 kg/m(3) SA, the model predicts a capital investment of $75 million and a net processing cost of $1.85 per kg SA. Required selling price of diethyl succinate for a 30% annual return on investment is $1.57 per kg. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Damage detection monitoring applications in self-healing concrete structures using embedded piezoelectric transducers and recovery

    International Nuclear Information System (INIS)

    Karaiskos, G; Tsangouri, E; Aggelis, D G; Van Hemelrijck, D; Deraemaeker, A

    2015-01-01

    The ageing, operational and ambient loadings have a great impact in the operational and maintenance cost of concrete structures. Their service life prolongation is of utmost importance and this can be efficiently achieved by using reliable and low-cost monitoring and self-healing techniques. In the present study, the ultrasonic pulse velocity (UPV) method using embedded small-size and low-cost piezoelectric PZT (lead zirconate titanate) ceramic transducers in concrete with self-healing properties is implemented for monitoring not only the setting and hardening phases of concrete since casting time, but also for the detection of damage initiation, propagation and recovery of integrity after healing. A couple of small-scale notched unreinforced concrete beams are subjected to mode-I fracture through three-point bending tests. After a 24-hour healing agent curing period, the beams are reloaded using the same loading scenario. The results demonstrate the excellent performance of the proposed monitoring technique during the hydration, damage generation and recovery periods. (paper)

  16. Delayed gastrointestinal recovery after abdominal operation – role of alvimopan

    Directory of Open Access Journals (Sweden)

    Berger NG

    2015-08-01

    Full Text Available Nicholas G Berger, Timothy J Ridolfi, Kirk A LudwigDivision of Colorectal Surgery, Department of Surgery, Medical College of Wisconsin, Milwaukee, Wisconsin USAAbstract: Postoperative Ileus (POI, which occurs after surgical manipulation of the bowel during abdominal operations, is associated with prolonged hospital stay, increasing medical costs, and delayed advancement of enteral diet, which contributes to a significant economic burden on the healthcare system. The use of accelerated care pathways has shown to positively impact gut function, but inevitable postoperative opioid use contributes to POI. Alvimopan is a peripherally acting µ-opioid receptor antagonist designed to mitigate antimotility effects of opioids. In our review, we examined ten trials on alvimopan's use after abdominal operations. Several of the earlier studies on patients undergoing bowel resection showed correlations between the study group and GI recovery as defined by passage of flatus, first bowel movement, and time to readiness for discharge. Data in patients undergoing total abdominal hysterectomy showed similarly decreased GI recovery time. Additionally, data within the past few years shows alvimopan is associated with more rapid GI recovery time in patients undergoing radical cystectomy. Based on our review, use of alvimopan remains a safe and potentially cost-effective means of reducing POI in patients following open GI surgery, radical cystectomy, and total abdominal hysterectomy, and should be employed following these abdominal operations.Keywords: postoperative ileus, alvimopan, ileus, bowel resection, return of bowel function

  17. Routine recovery: an ethical plan for greatly increasing the supply of transplantable organs.

    Science.gov (United States)

    Spital, Aaron; Taylor, James S

    2008-04-01

    All current organ procurement policies require some form of consent. Many families refuse to permit organ recovery from a recently deceased relative; therefore, the major cost of requiring consent is the loss of some lives that could have been saved through transplantation. Here, we argue for a much more efficient approach to organ procurement from brain dead individuals - routine recovery of all transplantable organs without consent. Careful analysis of the relevant literature shows that, compared with its competitors, routine recovery has the greatest potential to increase cadaveric organ procurement and save lives while causing very little harm. Furthermore, a recent survey suggests that 30% of the US public would already accept routine recovery even though the respondents were not educated regarding the value of this approach. Patients on the transplant waiting list are dying while organs that could have saved them are being buried or burned because of family refusal to allow posthumous organ procurement. Routine recovery would eliminate this tragic loss of life-saving organs without violating ethical principles. Indeed, we argue that of all the proposals designed to increase the supply of transplantable cadaveric organs, routine recovery is the best.

  18. Solar Thermal Enhanced Oil Recovery, (STEOR) Volume 1: Executive summary

    Science.gov (United States)

    Elzinga, E.; Arnold, C.; Allen, D.; Garman, R.; Joy, P.; Mitchell, P.; Shaw, H.

    1980-11-01

    Thermal enhanced oil recovery is widely used in California to aid in the production of heavy oils. Steam injection either to stimulate individual wells or to drive oil to the producing wells, is by far the major thermal process today and has been in use for over 20 years. Since steam generation at the necessary pressures (generally below 4000 kPa (580 psia)) is within the capabilities of present day solar technology, it is logical to consider the possibilities of solar thermal enhanced oil recovery (STEOR). The present project consisted of an evaluation of STEOR. Program objectives, system selection, trade-off studies, preliminary design, cost estimate, development plan, and market and economic analysis are summarized.

  19. Aligning oversize/overweight fees with agency costs : critical issues.

    Science.gov (United States)

    2013-08-01

    This project provides an elementary analysis of issues and a proposed framework for the state to evaluate cost recovery options : due to OSOW operations. The authors provide a review of current permitting practices, provide a sampling of fee structur...

  20. Uses and abuses of recovery: implementing recovery-oriented practices in mental health systems

    Science.gov (United States)

    Slade, Mike; Amering, Michaela; Farkas, Marianne; Hamilton, Bridget; O'Hagan, Mary; Panther, Graham; Perkins, Rachel; Shepherd, Geoff; Tse, Samson; Whitley, Rob

    2014-01-01

    An understanding of recovery as a personal and subjective experience has emerged within mental health systems. This meaning of recovery now underpins mental health policy in many countries. Developing a focus on this type of recovery will involve transformation within mental health systems. Human systems do not easily transform. In this paper, we identify seven mis-uses (“abuses”) of the concept of recovery: recovery is the latest model; recovery does not apply to “my” patients; services can make people recover through effective treatment; compulsory detention and treatment aid recovery; a recovery orientation means closing services; recovery is about making people independent and normal; and contributing to society happens only after the person is recovered. We then identify ten empirically-validated interventions which support recovery, by targeting key recovery processes of connectedness, hope, identity, meaning and empowerment (the CHIME framework). The ten interventions are peer support workers, advance directives, wellness recovery action planning, illness management and recovery, REFOCUS, strengths model, recovery colleges or recovery education programs, individual placement and support, supported housing, and mental health trialogues. Finally, three scientific challenges are identified: broadening cultural understandings of recovery, implementing organizational transformation, and promoting citizenship. PMID:24497237

  1. Design of water and heat recovery networks for the simultaneous minimisation of water and energy consumption

    International Nuclear Information System (INIS)

    Polley, Graham Thomas; Picon-Nunez, Martin; Lopez-Maciel, Jose de Jesus

    2010-01-01

    This paper describes procedures for the design of processes in which water and energy consumption form a large part of the operating cost. Good process design can be characterised by a number of properties, amongst the most important are: efficient use of raw materials, low capital cost and good operability. In terms of thermodynamic analysis these processes can be characterised as being either a 'pinch' problem or a 'threshold' problem. This paper concentrates on developing designs for problems of the threshold type. Most of the problems discussed by previous workers have been of this type. With these properties in mind this work looks at the design of integrated water and energy systems that exhibit the following features: 1. minimum water consumption, 2. minimum energy consumption, and 3. simple network structure. The approach applies for single contaminant. It is shown that the water conservation problem and the heat recovery problems can be de-coupled and the water conservation options should be established first. It is then shown that the number of heaters and heat recovery units required for the system, the quantity and type of hot utility needed for the plant and the complexity of the heat recovery network can all be determined without having to design any heat recovery network. This allows the engineer to select the better water conservation option before embarking on the design of the heat recovery network. For this type of problem the design of the heat recovery network itself is usually simple and straightforward.

  2. Counteracting ammonia inhibition during anaerobic digestion by recovery using submersible microbial desalination cell.

    Science.gov (United States)

    Zhang, Yifeng; Angelidaki, Irini

    2015-07-01

    Ammonia inhibition is one of the most frequent and serious problems in biogas plants. In this study, a novel hybrid system consisting of a submersible microbial desalination cell (SMDC) and a continuous stirred tank reactor (CSTR) was developed for counteracting ammonia inhibition during anaerobic digestion (AD) with simultaneous in situ ammonia recovery and electricity production. The SMDC was powered by acetate in a buffer solution, while synthetic ammonia-rich wastewater was used as the feeding of the CSTR. Under continuous operation, ammonia recovery rate of 86 g-N/m(2) /day and current density of 4.33 A/m(2) were achieved at steady-state condition. As a result, 112% extra biogas was produced due to ammonia recovery by the SMDC. High-throughput sequencing showed that ammonia recovery had an impact on the microbial community structures in the SMDC and CSTR. Considering the additional economic benefits of biogas enhancement and possible wastewater treatment, the SMDC may represent a cost-effective and environmentally friendly method for waste resources recovery and biomethanation of ammonia-rich residues. © 2015 Wiley Periodicals, Inc.

  3. Themoeconomic optimization of triple pressure heat recovery steam generator operating parameters for combined cycle plants

    Directory of Open Access Journals (Sweden)

    Mohammd Mohammed S.

    2015-01-01

    Full Text Available The aim of this work is to develop a method for optimization of operating parameters of a triple pressure heat recovery steam generator. Two types of optimization: (a thermodynamic and (b thermoeconomic were preformed. The purpose of the thermodynamic optimization is to maximize the efficiency of the plant. The selected objective for this purpose is minimization of the exergy destruction in the heat recovery steam generator (HRSG. The purpose of the thermoeconomic optimization is to decrease the production cost of electricity. Here, the total annual cost of HRSG, defined as a sum of annual values of the capital costs and the cost of the exergy destruction, is selected as the objective function. The optimal values of the most influencing variables are obtained by minimizing the objective function while satisfying a group of constraints. The optimization algorithm is developed and tested on a case of CCGT plant with complex configuration. Six operating parameters were subject of optimization: pressures and pinch point temperatures of every three (high, intermediate and low pressure steam stream in the HRSG. The influence of these variables on the objective function and production cost are investigated in detail. The differences between results of thermodynamic and the thermoeconomic optimization are discussed.

  4. Technical and economical parameters of the recovery of straw for six systems; Parametros tecnico-economicos do recolhimento do palhico por seis sistemas

    Energy Technology Data Exchange (ETDEWEB)

    Michelazzo, Marcio Beraldo; Braunbeck, Oscar Antonio [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], Emails: marcio.michelazzo@agr.unicamp.br, oscar@agr.unicamp.br

    2006-07-01

    An analysis was done of the economic and mechanical parameters involved in the packing processes of the sugarcane trash. A model was defined to estimate the cost of trash recovery simulating the field capacity, oil consumption, depreciation, repair and maintenance as well as labor required for the field and transport operations. Six recovery systems were studied both from the technical and economical points of view. The results showed that handling billets and trash together, described as 'Integral harvesting', has the lowest cost for trash recovery, both for short and long distances, followed by bulk handling of chopped trash, the round bale, the cotton bale and finally the pellet and briquette systems. (author)

  5. Innovative bioelectrochemical-anaerobic-digestion integrated system for ammonia recovery and bioenergy production from ammonia-rich residues

    DEFF Research Database (Denmark)

    Zhang, Yifeng; Angelidaki, Irini

    2015-01-01

    (SMRC) and a continuous stirred tank reactor (CSTR), to prevent ammonia toxicity during anaerobic digestion by in-situ ammonia recovery and electricity production (Figure 1). In batch experiment, the ammonia concentration in the CSTR decreased from 6 to 0.7 g-N/L with an average recovery rate of 0.18 g-N/L(CSTR...... performance was enhanced. In addition, the coexistence of other cations in CSTR or cathode had no negative effect on the ammonia transportation. In continuous reactor operation, 112% extra biogas production was achieved due to ammonia recovery. High-throughput molecular sequencing analysis showed an impact...... of ammonia recovery on the microbial community composition in the integrated system. Results clearly indicate the great potential of the SMRC-CSTR-coupled system for efficient and cost-effective ammonia recovery, energy production and treatment of ammonia-rich residues....

  6. Retrofit of heat exchanger networks with pressure recovery of process streams at sub-ambient conditions

    International Nuclear Information System (INIS)

    Onishi, Viviani C.; Ravagnani, Mauro A.S.S.; Caballero, José A.

    2015-01-01

    Highlights: • New mathematical model for heat exchanger networks retrofit with pressure recovery. • Optimal heat and work integration applied to the retrofit of sub-ambient processes. • Streams pressure manipulation is used to enhance heat integration of the system. • Compressors and turbines can act on a coupling shaft and/or as stand-alone equipment. • Use of smaller amount of cold utilities, reducing significantly the operational costs. - Abstract: This paper presents a new mathematical programming model for the retrofit of heat exchanger networks (HENs), wherein the pressure recovery of process streams is conducted to enhance heat integration. Particularly applied to cryogenic processes, HENs retrofit with combined heat and work integration is mainly aimed at reducing the use of expensive cold services. The proposed multi-stage superstructure allows the increment of the existing heat transfer area, as well as the use of new equipment for both heat exchange and pressure manipulation. The pressure recovery of streams is carried out simultaneously with the HEN design, such that the process conditions (streams pressure and temperature) are variables of optimization. The mathematical model is formulated using generalized disjunctive programming (GDP) and is optimized via mixed-integer nonlinear programming (MINLP), through the minimization of the retrofit total annualized cost, considering the turbine and compressor coupling with a helper motor. Three case studies are performed to assess the accuracy of the developed approach, including a real industrial example related to liquefied natural gas (LNG) production. The results show that the pressure recovery of streams is efficient for energy savings and, consequently, for decreasing the HEN retrofit total cost especially in sub-ambient processes

  7. Concept definition study for recovery of tumbling satellites. Volume 2: Supporting research and technology report

    Science.gov (United States)

    Cable, D. A.; Derocher, W. L., Jr.; Cathcart, J. A.; Keeley, M. G.; Madayev, L.; Nguyen, T. K.; Preese, J. R.

    1986-01-01

    A number of areas of research and laboratory experiments were identified which could lead to development of a cost efficient remote, disable satellite recovery system. Estimates were planned of disabled satellite motion. A concept is defined as a Tumbling Satellite Recovery kit which includes a modular system, composed of a number of subsystem mechanisms that can be readily integrated into varying combinations. This would enable the user to quickly configure a tailored remote, disabled satellite recovery kit to meet a broad spectrum of potential scenarios. The capability was determined of U.S. Earth based satellite tracking facilities to adequately determine the orientation and motion rates of disabled satellites.

  8. Investigation of recovery system for Am and Cm. Results in 1999

    International Nuclear Information System (INIS)

    Watanabe, Masayuki; Kamiya, Masayoshi; Tanaka, Hiroshi

    2000-07-01

    In JAPAN NUCLEAR CYCLE DEVELOPMENT INSTITUTE, the feasibility study has been carried out in order to evaluate various methods of FBR cycle technology and to propose candidate concepts of practical technology. As a part of this, we investigated material balance and a process flow diagram of SETFICS process for the recovery system of Am and Cm from high level radioactive liquid waste, and we preliminarily evaluated the equipment scale, the cost and waste generation rate of this system. As a result, it was obtained that these values are about 17,15 and 10%, respectively, of the recycle plant based on the simplified PUREX process. In addition, we investigated preliminary flowsheets of 4 recovery systems for Am and Cm, and compared each to each of them. It was evaluated that the equipment scale of any process was also equivalent. From these results, each system is applicable as the recovery system of Am and Cm. But these results suggest that the facility may be much larger than the PUREX plant, in spite of small contents of the recovery materials in each system. Therefore, whichever method is applied to the recovery system of Am and Cm, we need to develop the process in order to make the system more compact and economical. (author)

  9. Experimental validation of a dynamic waste heat recovery system model for control purposes

    NARCIS (Netherlands)

    Feru, E.; Kupper, F.; Rojer, C.; Seykens, X.L.J.; Scappin, F.; Willems, F.P.T.; Smits, Jeroen; Jager, de A.G.; Steinbuch, M.

    2013-01-01

    This paper presents the identification and validation of a dynamic Waste Heat Recovery (WHR) system model. Driven by upcoming CO2 emission targets and increasing fuel costs, engine exhaust gas heat utilization has recently attracted much attention to improve fuel efficiency, especially for

  10. Techno-economic analysis and optimization of the heat recovery of utility boiler flue gas

    International Nuclear Information System (INIS)

    Xu, Gang; Huang, Shengwei; Yang, Yongping; Wu, Ying; Zhang, Kai; Xu, Cheng

    2013-01-01

    Highlights: • Four typical flue gas heat recovery schemes are quantitatively analyzed. • The analysis considers thermodynamic, heat transfer and hydrodynamics factors. • Techno-economic analysis and optimization design are carried out. • High-stage steam substitute scheme obtains better energy-saving effect. • Large heat transfer area and high flue gas resistances weaken overall performance. - Abstract: Coal-fired power plants in China consume nearly half of available coals, and the resulting CO 2 emissions cover over 40% of total national emissions. Therefore, reducing the energy expenditure of coal-fired power plants is of great significance to China’s energy security and greenhouse gas reduction programs. For coal-fired power plants, the temperature of a boiler’s exhaust gas reaches 120–150 °C or even higher. The thermal energy of boiler’s exhaust accounts for approximately 3–8% of the total energy of fuel input. Given these factors, we conducted a techno-economic analysis and optimization design of the heat recovery system using boiler exhaust gas. This research is conformed to the principles of thermodynamic, heat transfer, and hydrodynamics. Based on the data from an existing 1000 MW typical power generation unit in China, four typical flue gas heat recovery schemes are quantitatively analyzed from the thermodynamics perspective. The impacts of flue gas heat recovery on net work output and standard coal consumption rate of various schemes are performed. Furthermore, the transfer area of heat recovery exchanger and the draft fan work increment due to the flue gas pressure drop are analyzed. Finally, a techno-economic analysis of the heat recovery schemes is conducted, and some recommendations on optimization design parameters are proposed, with full consideration of various factors such as the decrease on fuel cost due to energy conservation as well as the investment cost of heat recovery retrofitting. The results revealed that, high

  11. Cost-effectiveness of focal psychodynamic therapy and enhanced cognitive-behavioural therapy in out-patients with anorexia nervosa.

    Science.gov (United States)

    Egger, N; Wild, B; Zipfel, S; Junne, F; Konnopka, A; Schmidt, U; de Zwaan, M; Herpertz, S; Zeeck, A; Löwe, B; von Wietersheim, J; Tagay, S; Burgmer, M; Dinkel, A; Herzog, W; König, H-H

    2016-12-01

    Anorexia nervosa (AN) is a serious illness leading to substantial morbidity and mortality. The treatment of AN very often is protracted; repeated hospitalizations and lost productivity generate substantial economic costs in the health care system. Therefore, this study aimed to determine the differential cost-effectiveness of out-patient focal psychodynamic psychotherapy (FPT), enhanced cognitive-behavioural therapy (CBT-E), and optimized treatment as usual (TAU-O) in the treatment of adult women with AN. The analysis was conducted alongside the randomized controlled Anorexia Nervosa Treatment of OutPatients (ANTOP) study. Cost-effectiveness was determined using direct costs per recovery at 22 months post-randomization (n = 156). Unadjusted incremental cost-effectiveness ratios (ICERs) were calculated. To derive cost-effectiveness acceptability curves (CEACs) adjusted net-benefit regressions were applied assuming different values for the maximum willingness to pay (WTP) per additional recovery. Cost-utility and assumptions underlying the base case were investigated in exploratory analyses. Costs of in-patient treatment and the percentage of patients who required in-patient treatment were considerably lower in both intervention groups. The unadjusted ICERs indicated FPT and CBT-E to be dominant compared with TAU-O. Moreover, FPT was dominant compared with CBT-E. CEACs showed that the probability for cost-effectiveness of FTP compared with TAU-O and CBT-E was ⩾95% if the WTP per recovery was ⩾€9825 and ⩾€24 550, respectively. Comparing CBT-E with TAU-O, the probability of being cost-effective remained <90% for all WTPs. The exploratory analyses showed similar but less pronounced trends. Depending on the WTP, FPT proved cost-effective in the treatment of adult AN.

  12. Other end of the telescope: a community approach to resource recovery

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, D R

    1977-09-01

    A small-scale alternative to the broad, high-technology approach to resource recovery centers is proposed in this paper. Starting with small components and combining a recovery system with job opportunity creation, this approach could stimulate the inner-city economy as well as contribute to solid-waste disposal programs. While several high-technology systems for separating solid wastes have been developed, their high capital costs make materials separation by householders and shopkeepers an attractive alternative. The experiences of Aynesley Metropolitan District Council in the United Kingdom is used to illustrate how a community recovery center can be planned and operated. Participants separated newsprint and paper, unbroken glass containers, cans, textiles, and miscellaneous items into five color-coded collection bags, which were collected twice a month. A personal relationship developed between participants and collection teams. Job opportunities developed from the collection and marketing of reclaimed items. (DCK)

  13. Finding and development costs in the United States

    International Nuclear Information System (INIS)

    Espenshade, S.A.

    1996-01-01

    The finding and development costs, or reserve replacement costs have become important statistics for benchmarking independent oil and gas companies against one another. However, no standard definition for finding costs exists. Every company reports their costs differently because of different accounting practices. The time period a company uses to calculate its finding costs is also important. Since exploring for a field and developing new properties involves a long lead time, costs should be calculated on an annual basis. Reserve replacement costs should include: acquisition costs, developments costs, exploration costs, geological and geophysical costs, general and administrative costs, drilling costs and improved recovery costs. The importance of independent oil and gas companies was emphasized. They drill 85% of all the wells in the United States and produce 64% of the natural gas and 37% of the crude oil. In the lower 48 states alone, they produce 49% of the crude oil. Lightening of regulatory and legislative burdens, opening up access to more public lands, improving the tax situation, and to obtain royalty relief, were considered essential to providing for the energy needs of Americans in the years to come. 12 figs

  14. Transition-cost issues for a restructuring US electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Utilities regulators can use a variety of approaches to calculate transition costs. We categorized these approaches along three dimensions. The first dimension is the use of administrative vs. market procedures to value the assets in question. Administrative approaches use analytical techniques to estimate transition costs. Market valuation relies on the purchase price of particular assets to determine their market values. The second dimension concerns when the valuation is done, either before or after the restructuring of the electricity industry. The third dimension concerns the level of detail involved in the valuation, what is often called top-down vs. bottom-up valuation. This paper discusses estimation approaches, criteria to assess estimation methods, specific approaches to estimating transition costs, factors that affect transition-cost estimates, strategies to address transition costs, who should pay transition costs, and the integration of cost recovery with competitive markets.

  15. Integrated economic and experimental framework for screening of primary recovery technologies for high cell density CHO cultures.

    Science.gov (United States)

    Popova, Daria; Stonier, Adam; Pain, David; Titchener-Hooker, Nigel J; Farid, Suzanne S

    2016-07-01

    Increases in mammalian cell culture titres and densities have placed significant demands on primary recovery operation performance. This article presents a methodology which aims to screen rapidly and evaluate primary recovery technologies for their scope for technically feasible and cost-effective operation in the context of high cell density mammalian cell cultures. It was applied to assess the performance of current (centrifugation and depth filtration options) and alternative (tangential flow filtration (TFF)) primary recovery strategies. Cell culture test materials (CCTM) were generated to simulate the most demanding cell culture conditions selected as a screening challenge for the technologies. The performance of these technology options was assessed using lab scale and ultra scale-down (USD) mimics requiring 25-110mL volumes for centrifugation and depth filtration and TFF screening experiments respectively. A centrifugation and depth filtration combination as well as both of the alternative technologies met the performance selection criteria. A detailed process economics evaluation was carried out at three scales of manufacturing (2,000L, 10,000L, 20,000L), where alternative primary recovery options were shown to potentially provide a more cost-effective primary recovery process in the future. This assessment process and the study results can aid technology selection to identify the most effective option for a specific scenario. © 2016 The Authors. Biotechnology Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Lean VOC-Air Mixtures Catalytic Treatment: Cost-Benefit Analysis of Competing Technologies

    Directory of Open Access Journals (Sweden)

    Gabriele Baldissone

    2017-06-01

    Full Text Available Various processing routes are available for the treatment of lean VOC-air mixtures, and a cost-benefit analysis is the tool we propose to identify the most suitable technology. Two systems have been compared in this paper, namely a “traditional” plant, with a catalytic fixed-bed reactor with a heat exchanger for heat recovery purposes, and a “non-traditional” plant, with a catalytic reverse-flow reactor, where regenerative heat recovery may be achieved thanks to the periodical reversal of the flow direction. To be useful for decisions-making, the cost-benefit analysis must be coupled to the reliability, or availability, analysis of the plant. Integrated Dynamic Decision Analysis is used for this purpose as it allows obtaining the full set of possible sequences of events that could result in plant unavailability, and, for each of them, the probability of occurrence is calculated. Benefits are thus expressed in terms of out-of-services times, that have to be minimized, while the costs are expressed in terms of extra-cost for maintenance activities and recovery actions. These variable costs must be considered together with the capital (fixed cost required for building the plant. Results evidenced the pros and cons of the two plants. The “traditional” plant ensures a higher continuity of services, but also higher operational costs. The reverse-flow reactor-based plant exhibits lower operational costs, but a higher number of protection levels are needed to obtain a similar level of out-of-service. The quantification of risks and benefits allows the stakeholders to deal with a complete picture of the behavior of the plants, fostering a more effective decision-making process. With reference to the case under study and the relevant operational conditions, the regenerative system was demonstrated to be more suitable to treat lean mixtures: in terms of time losses following potential failures the two technologies are comparable (Fixed bed

  17. Stranded costs and exit fees

    International Nuclear Information System (INIS)

    2002-01-01

    The New Brunswick Market Design Committee has been directed to examine the issue of stranded costs since it is a major component of restructuring within the electricity sector. When regulated monopolies are faced with competition, they could find that some of their embedded costs cannot be recovered. These costs are referred to as stranded costs. Common sources include large capital investments in uneconomic plants or expensive power purchase contracts or fuel supply contracts. In general, stranded costs do not include gains or losses associated with normal business risks experienced by regulated utilities. This report presents recommendations for mitigation of stranded costs, valuation methodologies and cost-recovery mechanisms. It also presents a summary of experience with stranded costs in other jurisdictions such as California, Rhode Island, Pennsylvania and Ontario. Stranded costs are often recovered through an obligatory charge on all customers, particularly in jurisdictions where retail competition exists. In the New Brunswick market, however, the only customers who can create stranded costs are those eligible to choose their own suppliers. It is argued that since most customers will not have a choice of electricity suppliers, they cannot generate stranded costs and therefore, should not have to pay costs stranded by others. A method to quantify stranded costs is presented, along with a review of transmission-related stranded costs in New Brunswick. Expansion of self-generation in New Brunswick could strand transmission assets. Currently, self-generators only contribute a small amount to fixed charges of the transmission system. However, under new recommended tariffs, the amount could increase. It is likely that the net amount of stranded transmission costs will not be large. 2 refs., 1 fig

  18. Removal and recovery of ammonia from livestock wastewater using hydrophobic gas-permeable membranes

    Science.gov (United States)

    The costs of fertilizers have rapidly increased in recent years, especially nitrogen fertilizer such as anhydrous ammonia which is made from natural gas. Thus, new treatment technologies for abatement of ammonia emissions in livestock operations are being focused on nitrogern (N) recovery in additio...

  19. The Role of Dairy in Effectiveness and Cost of Treatment of Children With Moderate Acute Malnutrition: A Narrative Review.

    Science.gov (United States)

    Suri, Devika J; Moorthy, Denish; Rosenberg, Irwin H

    2016-06-01

    Dairy is recommended in specially formulated supplementary foods to treat children with moderate acute malnutrition (MAM) but with limited evidence and added cost. Review studies of ready-to-use foods (RUFs) versus fortified blended foods (FBFs) to determine whether inclusion of dairy modifies the comparative effectiveness and cost. We reviewed literature comparing FBF and RUF in treatment of MAM among children younger than 5 years in developing countries. Outcomes of recovery from MAM, weight, and length gain were compared among treatment categories: FBF with dairy (FBF+), FBF without dairy (FBF-), RUF with dairy (RUF+), and RUF without dairy (RUF-). Supplement cost was compared per 500 kcal. Eight studies were included. Rations were heterogeneous in energy and type of dairy. Overall, RUF+, RUF-, and FBF+ performed similarly, with higher recovery and weight gain compared with FBF-. RUF+ had higher recovery (in 5 of 6 comparisons), weight gain (4 of 4), and length gain (1 of 4) versus FBF-. The RUF+ had higher recovery (1 of 2) versus FBF+, with no other differences. The RUF- versus FBF+ had no differences (0 of 2). The RUF- had higher recovery (1 of 2), weight gain (2 of 2) versus FBF-. Four studies reported supplement costs, which averaged US$0.15 (FBF-), US$0.18 (FBF+), US$0.18 (RUF-), and US$0.37 (RUF+) per 500 kcal. There is a consistent benefit of FBF that include dairy in treatment of children with MAM. Benefits of dairy in RUF require further investigation. Evidence from rigorous quantitative analysis of existing data, cost-effectiveness, and prospective trials will be essential in determining policy on treatment for children with MAM. © The Author(s) 2016.

  20. Control optimizations for heat recovery from CO2 refrigeration systems in supermarket

    International Nuclear Information System (INIS)

    Ge, Y.T.; Tassou, S.A.

    2014-01-01

    Highlights: • Application of supermarket energy control system model. • Heat recovery from CO 2 refrigeration system in supermarket space conditioning. • Effect of pressure controls of CO 2 refrigeration system on heat recovery potentials. • Control optimization of CO 2 refrigeration system for heat recovery in supermarket. - Abstract: A modern supermarket energy control system has a concurrent need for electricity, food refrigeration and space heating or cooling. Approximately 10% of this energy is for conventional gas-powered heating. In recent years, the use of CO 2 as a refrigerant in supermarket systems has received considerable attention due to its negligible contribution to direct greenhouse gas emissions and excellent thermophysical and heat transfer properties. CO 2 refrigeration systems also offer more compact component designs over a conventional HFC system and heat recovery potential from compressor discharge. In this paper, the heat recovery potential of an all-CO 2 cascade refrigeration system in a supermarket has been investigated using the supermarket simulation model “SuperSim” developed by the authors. It has been shown that at UK weather conditions, the heat recovery potential of CO 2 refrigeration systems can be increased by increasing the condenser/gas cooler pressure to the point where all the heat requirements are satisfied. However, the optimum level of heat recovery will vary during the year and the control system should be able to continuously optimize this level based on the relative cost of energy, i.e., gas and electricity

  1. An Assessment of the Drivers and Barriers for the Deployment of Urban Phosphorus Recovery Technologies: A Case Study of The Netherlands

    Directory of Open Access Journals (Sweden)

    Marissa A. de Boer

    2018-05-01

    Full Text Available Phosphorus (P, being one of the building blocks of life, is essential for a multitude of applications, primarily for fertilizer usage. Sustainable management of phosphorus is becoming increasingly important in light of adverse environmental effects, ambiguous reserves, increasing global demand and unilateral dependence. Recovery of phosphorus from the biggest loss stream, communal wastewater, has the potential to tackle each of these problems. The implementation of phosphorus recovery technologies at wastewater treatment plants is not widespread, despite prolonged efforts primarily done by researchers over the past decade. This study aimed to assess the drivers and barriers of a phosphorus recovery transition. Several key stakeholders involved in this transition in The Netherlands were interviewed. The Netherlands was taken as a case study, since it serves as a frontrunner in the implementation of phosphorus recovery technologies. This study shows that the main barriers from the point of view of fertilizer companies are the different and unclear characteristics of the phosphorus recovery product struvite compared to common fertilizers. Moreover, the end-of-waste status of struvite is mentioned as a prominent barrier for a phosphorus transition, since it hinders free market trade. Many water boards indicate that the main barrier is the high investment cost with an uncertain return on investment for onsite struvite recovery processes. The specified main driver for water boards for onsite struvite phosphorus recovery technology is the reduction of maintenance costs, and for phosphorus recovery from sewage sludge ash, the low organic pollutant in the P recovery product.

  2. Report: EPA Needs to Improve Internal Controls to Increase Cost Recovery

    Science.gov (United States)

    Report #09-P-0144, April 27, 2009. Within a sample of removal actions we reviewed, EPA collected from responsible parties approximately 11 percent ($31.4 of $294.5 million) of the Federal Government’s costs for conducting the removal actions.

  3. A review on waste heat recovery from exhaust in the ceramics industry

    Science.gov (United States)

    Delpech, Bertrand; Axcell, Brian; Jouhara, Hussam

    2017-11-01

    Following the energy crisis in 1980, many saving technologies have been investigated with attempts to implement them into various industries, one of them is the field of ceramic production. In order to comply with energy saving trends and environmental issues, the European ceramic industry sector has developed energy efficient systems which reduced significantly production time and costs and reduced total energy consumption. The last achievement is of great importance as the energy consumption of the ceramic process accounts for a significant percentage of the total production costs. More precisely, the firing stage consumes the highest amount of energy during the whole ceramic production process. The use of roller kilns, fired by natural gas, involves a loss of 50% of the input energy via the flue gas and the cooling gas exhausts. This review paper briefly describes the production process of the different ceramic products, with a focus on the ceramic sector in Europe. Due to the limited on waste heat recovery in the ceramic industry, other high temperature waste heat recovery applications are considered in the paper, such as in concrete and steel production, which could have a potential use in the ceramic industry. The state of the art technologies used in the ceramics industry are reviewed with a special interest in waste heat recovery from the ceramic process exhaust stacks and energy saving technologies.

  4. IDC Reengineering Phase 2 & 3 Rough Order of Magnitude (ROM) Cost Estimate Summary (Leveraged NDC Case).

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James M.; Prescott, Ryan; Dawson, Jericah M.; Huelskamp, Robert M.

    2014-11-01

    Sandia National Laboratories has prepared a ROM cost estimate for budgetary planning for the IDC Reengineering Phase 2 & 3 effort, based on leveraging a fully funded, Sandia executed NDC Modernization project. This report provides the ROM cost estimate and describes the methodology, assumptions, and cost model details used to create the ROM cost estimate. ROM Cost Estimate Disclaimer Contained herein is a Rough Order of Magnitude (ROM) cost estimate that has been provided to enable initial planning for this proposed project. This ROM cost estimate is submitted to facilitate informal discussions in relation to this project and is NOT intended to commit Sandia National Laboratories (Sandia) or its resources. Furthermore, as a Federally Funded Research and Development Center (FFRDC), Sandia must be compliant with the Anti-Deficiency Act and operate on a full-cost recovery basis. Therefore, while Sandia, in conjunction with the Sponsor, will use best judgment to execute work and to address the highest risks and most important issues in order to effectively manage within cost constraints, this ROM estimate and any subsequent approved cost estimates are on a 'full-cost recovery' basis. Thus, work can neither commence nor continue unless adequate funding has been accepted and certified by DOE.

  5. Consultations on a Canadian resource recovery strategy : summary of Yellowknife/Northwest Territories and Yukon consultation held at Yellowknife, Northwest Territories on April 22, 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    Natural Resources Canada (NRCan) contracted Hatch Associates to conduct seven one-day resource recovery sessions across Canada. The focus of the consultations was to identify opportunities, barriers and demonstration projects to facilitate resource recovery in different urban, rural and northern communities in Canada for the industrial, institutional and post-consumer sectors. These sessions are a first step in helping Canada identify economically-driven resource recovery activities that are environmentally and socially sustainable. This report describes the outcome of a meeting in Yellowknife in the spring of 2002 which involved 16 participants including resource recyclers, the City of Yellowknife, Diavik Diamonds, the government of the Northwest Territories, local entrepreneurs, a landfill operator, a gold mine undergoing environmental rehabilitation, and citizens including an Inuit Elder. The participants identified the following priorities for resource recovery: metal tanks at the Giant Mine, scrap metal at Giant Mine, waste paper, waste oil from vehicles, hazardous waste, arsenic trioxide, and waste packaging. The main barriers to resource recovery in Yellowknife are transportation costs, lack of volumes, the collection/storage infrastructure, and the fact that life cycle and social environmental costs are not included in the costs of products. Several recommendations were proposed to improve resource recovery, including charging a small fee for access to the salvage section of the Yellowknife landfill, charging a fee for garbage over a certain weight, or providing recycling bins everywhere and imposing a fine for disposal of recyclables. tabs.

  6. A strategy for low cost development of incremental oil in legacy reservoirs

    Science.gov (United States)

    Attanasi, E.D.

    2016-01-01

    The precipitous decline in oil prices during 2015 has forced operators to search for ways to develop low-cost and low-risk oil reserves. This study examines strategies to low cost development of legacy reservoirs, particularly those which have already implemented a carbon dioxide enhanced oil recovery (CO2 EOR) program. Initially the study examines the occurrence and nature of the distribution of the oil resources that are targets for miscible and near-miscible CO2 EOR programs. The analysis then examines determinants of technical recovery through the analysis of representative clastic and carbonate reservoirs. The economic analysis focusses on delineating the dominant components of investment and operational costs. The concluding sections describe options to maximize the value of assets that the operator of such a legacy reservoir may have that include incremental expansion within the same producing zone and to producing zones that are laterally or stratigraphically near main producing zones. The analysis identified the CO2 recycle plant as the dominant investment cost item and purchased CO2 and liquids management as a dominant operational cost items. Strategies to utilize recycle plants for processing CO2 from multiple producing zones and multiple reservoir units can significantly reduce costs. Industrial sources for CO2 should be investigated as a possibly less costly way of meeting EOR requirements. Implementation of tapered water alternating gas injection schemes can partially mitigate increases in fluid lifting costs.

  7. Optimization of Surfactant Mixtures and Their Interfacial Behavior for Advanced Oil Recovery, Annual Report, September 30, 1999-September 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Somasundaran, Prof. P.

    2001-04-04

    The goal of this report is to develop improved extraction processes to mobilize and produce the oil left untapped using conventional techniques. Current chemical schemes for recovering the residual oil have been in general less than satisfactory. High cost of the processes as well as significant loss of chemicals by adsorption on reservoir materials and precipitation has limited the utility of chemical-flooding operations. There is a need to develop cost-effective, improved reagent schemes to increase recovery from domestic oil reservoirs. The goal of the report was to develop and evaluate novel mixtures of surfactants for improved oil recovery.

  8. How much are households willing to contribute to the cost recovery of drinking water supply? Results from a household survey

    Directory of Open Access Journals (Sweden)

    S. Tarfasa

    2013-04-01

    Full Text Available Financial resources are crucial to improve existing urban drinking water supply in developing countries typically characterized by low cost recovery rates and high and rapidly growing demand for more reliable services. This study examines the willingness to pay for improved urban drinking water supply employing a choice model (CM in an urban context in Ethiopia, Hawassa, with a household survey of 170 respondents. The design of the choice model allows the estimation of the values of two attributes of urban drinking water service (extra day water delivery per week and safer water. The findings indicate that households are willing to pay up to 60% extra for improved levels of water supply over and above their current water bill. Especially those households living in the poorest part of the city with the lowest service levels demonstrate that they are willing to pay more despite significant income constraints they are facing. Women value the improvement of water quality most, while a significant effect is found for averting behavior and expenditures. The estimated economic values can be used in policy appraisals of investment decisions.

  9. Uncovering Recovery: The Resistible Rise of Recovery and Resilience

    Directory of Open Access Journals (Sweden)

    David Harper

    2012-10-01

    Full Text Available Discourses of recovery and resilience have risen to positions of dominance in the mental health field. Models of recovery and resilience enjoy purchase, in both policy and practice, across a range of settings from self-described psychiatric survivors through to mental health charities through to statutory mental health service providers. Despite this ubiquity, there is confusion about what recovery means. In this article we problematize notions of recovery and resilience, and consider what, if anything, should be recovered from these concepts. We focus on three key issues, i individualization, ii the persistence of a deficit model, and iii collective approaches to recovery. Through documentary analysis we consider these issues across third sector organizations, and public and mental health policy. Firstly, definitional debates about recovery reflect wider ideological debates about the nature of mental health. The vagueness of these concepts and implicit assumptions inherent in dominant recovery and resilience discourses render them problematic because they individualize what are social problems. Secondly, these discourses, despite being seen as inherently liberatory are conceptually dependent on a notion of deficit in that talk of “positives” and “strengths” requires the existence of “negatives” and “weaknesses” for these concepts to make sense.  We argue that this does little to substantially transform dominant understandings of psychological distress. Thirdly, these issues combine to impact upon the progressive potential of recovery. It comes to be seen as an individualistic experiential narrative accompaniment to medical understandings where the structural causes of distress are obscured. This in turn impacts upon the potential for recovery to be used to explore more collective, political aspects of emotional distress. Drawing on the work of Fraser, we use this critique to characterize “recovery” as a “struggle for

  10. No effect of fibrin sealant on drain output or functional recovery following simultaneous bilateral total knee arthroplasty

    DEFF Research Database (Denmark)

    Skovgaard, Christian; Holm, Bente; Troelsen, Anders

    2013-01-01

    Background and purpose Blood loss after total knee arthroplasty (TKA) may lead to anemia, blood transfusions, and increased total costs. Also, bleeding into the periarticular tissue may cause swelling and a reduction in quadriceps strength, thus impairing early functional recovery. In this random...... in TKA showed no benefit in reducing drain output or in facilitating early functional recovery when used with a tourniquet, tranexamic acid, and a femoral bone plug....

  11. Building addiction recovery capital through online participation in a recovery community.

    Science.gov (United States)

    Bliuc, Ana-Maria; Best, David; Iqbal, Muhammad; Upton, Katie

    2017-11-01

    This study examines how online participation in a community of recovery contributes to personal journeys of recovery. It investigates whether recovery capital building - as indicated by increased levels and quality of online social interactions - and markers of positive identity development predict retention in a recovery program designed around fostering community involvement for early stage recovery addicts. It was predicted that online participation on the group's Facebook page and positive identity development are associated to retention in the program. To map how participants interact online, social network analysis (SNA) based on naturally occurring online data (N = 609) on the Facebook page of a recovery community was conducted. Computerised linguistic analyses evaluated sentiment of the textual data (capturing social identity markers). Linear regression analyses evaluated whether indicators of recovery capital predict program retention. To illustrate the findings in the context of the specific recovery community, presented are two case studies of key participants who moved from the periphery to the centre of the social network. By conducting in-depth interviews with these participants, personal experiences of engagement in the online community of group members who have undergone the most significant changes since joining the community are explored. Retention in the program was determined by a) the number of comment 'likes' and all 'likes' received on the Facebook page; b) position in the social network (degree of centrality); and c) linguistic content around group identity and achievement. Positive online interactions between members of recovery communities support the recovery process through helping participants to develop recovery capital that binds them to groups supportive of positive change. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Aligning oversize/overweight permit fees with agency costs : critical issues.

    Science.gov (United States)

    2013-08-01

    This project provides an elementary analysis of issues and a proposed framework for the state to evaluate cost recovery options : due to OSOW operations. The authors provide a review of current permitting practices, provide a sampling of fee structur...

  13. Neuro-Simulation Tool for Enhanced Oil Recovery Screening and Reservoir Performance Prediction

    Directory of Open Access Journals (Sweden)

    Soheil Bahrekazemi

    2017-09-01

    Full Text Available Assessment of the suitable enhanced oil recovery method in an oilfield is one of the decisions which are made prior to the natural drive production mechanism. In some cases, having in-depth knowledge about reservoir’s rock, fluid properties, and equipment is needed as well as economic evaluation. Both putting such data into simulation and its related consequent processes are generally very time consuming and costly.  In order to reduce study cases, an appropriate tool is required for primary screening prior to any operations being performed, to which leads reduction of time in design of ether pilot section or production under field condition. In this research, two different and useful screening tools are presented through a graphical user interface. The output of just over 900 simulations and verified screening criteria tables were employed to design the mentioned tools. Moreover, by means of gathered data and development of artificial neural networks, two dissimilar screening tools for proper assessment of suitable enhanced oil recovery method were finally introduced. The first tool is about the screening of enhanced oil recovery process based on published tables/charts and the second one which is Neuro-Simulation tool, concerns economical evaluation of miscible and immiscible injection of carbon dioxide, nitrogen and natural gas into the reservoir. Both of designed tools are provided in the form of a graphical user interface by which the user, can perceive suitable method through plot of oil recovery graph during 20 years of production, costs of gas injection per produced barrel, cumulative oil production, and finally, design the most efficient scenario.

  14. Allocating nuclear power plant costs over time

    International Nuclear Information System (INIS)

    Nellis, R.E.

    1983-01-01

    The nuclear generating plants coming into service in the 1980s have book values amounting to several billion dollars, doubling the rate bases of the owner utilities in some instances. The impact that this is producing on electric rates is of concern to consumers, regulators, and utilities alike. A review of the basic nature of a productive asset, the purpose of depreciation accounting, and the composition of interest rates leads to a method of constructing capital-recovery schedules which has come to be termed economic depreciation. This methodology departs from conventional methodology only in that it accepts inflation as a fact of life. This article indicates that application of the procedure to an actual nuclear reactor provides benefits for all classes of ratepayers in that initial capital-recovery costs to ratepayers are substantially lower and, in terms of dollars of constant purchasing power, the total amount paid by customers for return on investment is substantially the same. For the utility, whereas initial capital recovery is lower, total capital recovery is somewhat greater, and the utility is no worse off if it must raise some working capital in the capital markets. 6 references, 4 figures, 2 tables

  15. Solid waste integrated cost analysis model: 1991 project year report

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The purpose of the City of Houston's 1991 Solid Waste Integrated Cost Analysis Model (SWICAM) project was to continue the development of a computerized cost analysis model. This model is to provide solid waste managers with tool to evaluate the dollar cost of real or hypothetical solid waste management choices. Those choices have become complicated by the implementation of Subtitle D of the Resources Conservation and Recovery Act (RCRA) and the EPA's Integrated Approach to managing municipal solid waste;. that is, minimize generation, maximize recycling, reduce volume (incinerate), and then bury (landfill) only the remainder. Implementation of an integrated solid waste management system involving all or some of the options of recycling, waste to energy, composting, and landfilling is extremely complicated. Factors such as hauling distances, markets, and prices for recyclable, costs and benefits of transfer stations, and material recovery facilities must all be considered. A jurisdiction must determine the cost impacts of implementing a number of various possibilities for managing, handling, processing, and disposing of waste. SWICAM employs a single Lotus 123 spreadsheet to enable a jurisdiction to predict or assess the costs of its waste management system. It allows the user to select his own process flow for waste material and to manipulate the model to include as few or as many options as he or she chooses. The model will calculate the estimated cost for those choices selected. The user can then change the model to include or exclude waste stream components, until the mix of choices suits the user. Graphs can be produced as a visual communication aid in presenting the results of the cost analysis. SWICAM also allows future cost projections to be made.

  16. Recovery of uranium (VI) from low level aqueous radioactive waste

    International Nuclear Information System (INIS)

    Kulshrestha, Mukul

    1996-01-01

    Investigation was undertaken to evaluate the uranium (VI) removal and recovery potential of a naturally occurring, nonviable macrofungus, Ganoderma Lucidum from the simulated low level aqueous nuclear waste. These low level waste waters discharged from nuclear mine tailings and nuclear power reactors have a typical U(VI) concentration of 10-100 mg/L. It is possible to recover this uranium economically with the advent of biosorption as a viable technology. Extensive laboratory studies have revealed Ganoderma Lucidum to be a potential biosorbent with a specific uptake of 2.75 mg/g at an equilibrium U(VI) concentration of 10 mg/L at pH 4.5. To recover the sorbed U(VI), the studies indicated 0.2N Na 2 CO 3 to be an effective elutant. The kinetics of U(VI) desorption from loaded Ganoderma Lucidum with 0.2N Na 2 CO 3 as elutant, was found to be rapid with more than 75% recovery occurring in the first five minutes, the specific metal release rate being 0.102 mg/g/min. The equilibrium data fitted to a linearised Freundlich plot and exhibited a near 100% recovery of sorbed U(VI), clearly revealing a cost-effective method of recovery of precious uranium from low level wastewater. (author). 7 refs., 3 figs., 1 tab

  17. Data Error Detection and Recovery in Embedded Systems: a Literature Review

    Directory of Open Access Journals (Sweden)

    Venu Babu Thati

    2017-06-01

    Full Text Available This paper presents a literature review on data flow error detection and recovery techniques in embedded systems. In recent years, embedded systems are being used more and more in an enormous number of applications from small mobile device to big medical devices. At the same time, it is becoming important for embedded developers to make embedded systems fault-tolerant. To make embedded systems fault-tolerant, error detection and recovery mechanisms are effective techniques to take into consideration. Fault tolerance can be achieved by using both hardware and software techniques. This literature review focuses on software-based techniques since hardware-based techniques need extra hardware and are an extra investment in cost per product. Whereas, software-based techniques needed no or limited hardware. A review on various existing data flow error detection and error recovery techniques is given along with their strengths and weaknesses. Such an information is useful to identify the better techniques among the others.

  18. Life Cycle Assessment and Cost Analysis of Water and ...

    Science.gov (United States)

    changes in drinking and wastewater infrastructure need to incorporate a holistic view of the water service sustainability tradeoffs and potential benefits when considering shifts towards new treatment technology, decentralized systems, energy recovery and reuse of treated wastewater. The main goal of this study is to determine the influence of scale on the energy and cost performance of different transitional membrane bioreactors (MBR) in decentralized wastewater treatment (WWT) systems by performing a life cycle assessment (LCA) and cost analysis. LCA is a tool used to quantify sustainability-related metrics from a systems perspective. The study calculates the environmental and cost profiles of both aerobic MBRs (AeMBR) and anaerobic MBRs (AnMBR), which not only recover energy from waste, but also produce recycled water that can displace potable water for uses such as irrigation and toilet flushing. MBRs represent an intriguing technology to provide decentralized WWT services while maximizing resource recovery. A number of scenarios for these WWT technologies are investigated for different scale systems serving various population density and land area combinations to explore the ideal application potentials. MBR systems are examined from 0.05 million gallons per day (MGD) to 10 MGD and serve land use types from high density urban (100,000 people per square mile) to semi-rural single family (2,000 people per square mile). The LCA and cost model was built with ex

  19. From recovery to regulation: an attempt to reconceptualize 'recovery from work'.

    Science.gov (United States)

    Zijlstra, F R H; Cropley, M; Rydstedt, L W

    2014-08-01

    The concept of 'recovery' (from work) has quickly gained in importance in the occupational health literature. However, we think that the conceptualization of 'recovery' needs some more attention. Although many authors acknowledge that 'recovery' refers to a 'process', the concept is often treated as a static construct. In this paper, we argue that recovery should be conceptualized as a dynamic construct related to changes in psychophysiological state of the person. We refer to two main theories that have provided a theoretical framework for research in this area: Meijman & Mulder's Effort-Recovery (E-R) model and Hobfoll's Conservation of Resources theory. In particular, the E-R model has been seminal in this area and stresses the element of changing psychophysiological states that has been used for reconceptualising 'recovery'. Various biological rhythms influence these changing psychophysiological states, and thus the level of energy (or effort) a person can mobilize or wants to mobilize. A distinction is made between 'physical fatigue' and 'mental fatigue' and its consequences for recovery. The discrepancy between 'actual state' and 'required state' has been suggested as the basis for 'recovery'. This emphasises that recovery is a dynamic and ongoing process, which also included motivational aspects, in particular as far as mental work is concerned. The capacity to maintain self-regulation of one's psychophysiological state is important in this respect. Thus, we propose that 'recovery' is the continuous process of harmonizing the 'actual state' with the state that is 'required' at that moment. Copyright © 2014 John Wiley & Sons, Ltd.

  20. Need for recovery from work and sleep-related complaints among nursing professionals.

    Science.gov (United States)

    Silva-Costa, Aline; Griep, Rosane Harter; Fischer, Frida Marina; Rotenberg, Lúcia

    2012-01-01

    The concept of need for recovery from work (NFR) was deduced from the effort recuperation model. In this model work produces costs in terms of effort during the working day. When there is enough time and possibilities to recuperate, a worker will arrive at the next working day with no residual symptoms of previous effort. NFR evaluates work characteristics such as psychosocial demands, professional work hours or schedules. However, sleep may be an important part of the recovery process. The aim of the study was to test the association between sleep-related complaints and NFR. A cross-sectional study was carried out at three hospitals. All females nursing professionals engaged in assistance to patients were invited to participate (N = 1,307). Participants answered a questionnaire that included four sleep-related complaints (insomnia, unsatisfactory sleep, sleepiness during work hours and insufficient sleep), work characteristics and NRF scale. Binomial logistic regression analysis showed that all sleep-related complaints are associated with a high need for recovery from work. Those who reported insufficient sleep showed a greater chance of high need for recovery; OR=2.730 (CI 95% 2.074 - 3.593). These results corroborate the hypothesis that sleep is an important aspect of the recovery process and, therefore, should be thoroughly investigated.

  1. Cost, energy, global warming, eutrophication and local human health impacts of community water and sanitation service options.

    Science.gov (United States)

    Schoen, Mary E; Xue, Xiaobo; Wood, Alison; Hawkins, Troy R; Garland, Jay; Ashbolt, Nicholas J

    2017-02-01

    We compared water and sanitation system options for a coastal community across selected sustainability metrics, including environmental impact (i.e., life cycle eutrophication potential, energy consumption, and global warming potential), equivalent annual cost, and local human health impact. We computed normalized metric scores, which we used to discuss the options' strengths and weaknesses, and conducted sensitivity analysis of the scores to changes in variable and uncertain input parameters. The alternative systems, which combined centralized drinking water with sanitation services based on the concepts of energy and nutrient recovery as well as on-site water reuse, had reduced environmental and local human health impacts and costs than the conventional, centralized option. Of the selected sustainability metrics, the greatest advantages of the alternative community water systems (compared to the conventional system) were in terms of local human health impact and eutrophication potential, despite large, outstanding uncertainties. Of the alternative options, the systems with on-site water reuse and energy recovery technologies had the least local human health impact; however, the cost of these options was highly variable and the energy consumption was comparable to on-site alternatives without water reuse or energy recovery, due to on-site reuse treatment. Future work should aim to reduce the uncertainty in the energy recovery process and explore the health risks associated with less costly, on-site water treatment options. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Bioenergy, material, and nutrients recovery from household waste: Advanced material, substance, energy, and cost flow analysis of a waste refinery process

    DEFF Research Database (Denmark)

    Tonini, Davide; Dorini, Gianluca Fabio; Astrup, Thomas Fruergaard

    2014-01-01

    Energy, materials, and resource recovery from mixed household waste may contribute to reductions in fossil fuel and resource consumption. For this purpose, legislation has been enforced to promote energy recovery and recycling. Potential solutions for separating biogenic and recyclable materials...

  3. A cost comparison study of open pit mining vs. in situ assisted gravity drainage

    International Nuclear Information System (INIS)

    McIntosh, J.; Luhning, R.W.

    1991-01-01

    The twin-well steam assisted gravity drainage (SAGD) process has resulted in breakthrough technology to access previously uneconomical deep-seated oil sands reserves in Alberta, and to provide a very cost-effective and environmentally acceptable method for extracting bitumen from reserves having a minimum of 30 m overburden. In the evaluation of new or improved bitumen recovery technologies for its new North Mine, Syncrude Canada has recognized that SAGD was a potential alternate to the current open pit mining and hot water extraction process. A study was conducted to compare and evaluate bitumen recovery by the two schemes at the North Mine site, scheduled to begin operations in 1996, for the reserves under Syncrude's tailings pond, and at a new grassroots area. Study description and analysis of results are presented for the grassroots case. The assumptions and mining/recovery processes used for the mining or SAGD method are detailed and the advantages and drawbacks of each scheme are noted. Results show that the SAGD unit supply costs are projected to be proportionately lower than the corresponding open pit mining/hot water extraction (OP/X) cost, using a 20-y project life. A sensitivity analysis indicates that the SAGD process is more sensitive to natural gas costs, while the OP/X scheme is more sensitive to power costs. The SAGD process is much less labor-intensive than OP/X and has obvious advantages in terms of tailings disposal and post-mining reclamation. In addition, the underground nature of SAGD operation eliminates adverse effects of the weather on working conditions. 11 figs

  4. Reducing Wildlife Damage with Cost-Effective Management Programmes.

    Directory of Open Access Journals (Sweden)

    Cheryl R Krull

    Full Text Available Limiting the impact of wildlife damage in a cost effective manner requires an understanding of how control inputs change the occurrence of damage through their effect on animal density. Despite this, there are few studies linking wildlife management (control, with changes in animal abundance and prevailing levels of wildlife damage. We use the impact and management of wild pigs as a case study to demonstrate this linkage. Ground disturbance by wild pigs has become a conservation issue of global concern because of its potential effects on successional changes in vegetation structure and composition, habitat for other species, and functional soil properties. In this study, we used a 3-year pig control programme (ground hunting undertaken in a temperate rainforest area of northern New Zealand to evaluate effects on pig abundance, and patterns and rates of ground disturbance and ground disturbance recovery and the cost effectiveness of differing control strategies. Control reduced pig densities by over a third of the estimated carrying capacity, but more than halved average prevailing ground disturbance. Rates of new ground disturbance accelerated with increasing pig density, while rates of ground disturbance recovery were not related to prevailing pig density. Stochastic simulation models based on the measured relationships between control, pig density and rate of ground disturbance and recovery indicated that control could reduce ground disturbance substantially. However, the rate at which prevailing ground disturbance was reduced diminished rapidly as more intense, and hence expensive, pig control regimes were simulated. The model produced in this study provides a framework that links conservation of indigenous ecological communities to control inputs through the reduction of wildlife damage and suggests that managers should consider carefully the marginal cost of higher investment in wildlife damage control, relative to its marginal conservation

  5. Computer program for sizing residential energy recovery ventilator

    International Nuclear Information System (INIS)

    Koontz, M.D.; Lee, S.M.; Spears, J.W.; Kesselring, J.P.

    1991-01-01

    Energy recovery ventilators offer the prospect of tighter control over residential ventilation rates than manual methods, such as opening windows, with a lesser energy penalty. However, the appropriate size of such a ventilator is not readily apparent in most situations. Sizing of energy recovery ventilation software was developed to calculate the size of ventilator necessary to satisfy ASHRAE Standard 62-1989, Ventilation for Acceptable Air Quality, or a user-specified air exchange rate. Inputs to the software include house location, structural characteristics, house operations and energy costs, ventilation characteristics, and HVAC system COP/efficiency. Based on these inputs, the program estimates the existing air exchange rate for the house, the ventilation rate required to meet the ASHRAE standard or user-specified air exchange rate, the size of the ventilator needed to meet the requirement, and the expected changes in indoor air quality and energy consumption. In this paper an illustrative application of the software is provided

  6. Methods of silver recovery from radiographs - comparative study

    Science.gov (United States)

    Canda, L. R.; Ardelean, E.; Hepuţ, T.

    2018-01-01

    Management and recovery of waste are activities with multiple impacts: technologically (by using waste on current production flows, thus replacing poor raw materials), economically (can substantially reduce manufacturing costs by recycling waste), social (by creating new jobs where it is necessary to process the waste in a form more suited to technological flows) and ecologically (by removing waste that is currently produced or already stored - but poses a threat to the health of the population and / or to the environment). This is also the case for medical waste, for example radiographs, which are currently produced in large quantities, for which replacement solutions are sought, but are currently stored by archiving in hospital units. The paper presents two methods used for this kind of waste management, the result being the recovery of silver, material with applications and with increasing price, but also the proper disposal of the polymeric support. This analysis aims at developing a more efficient recycling technology for medical radiographs.

  7. A rare sign of ischemia during exercise ECG: PR interval lengthening in the recovery period.

    Science.gov (United States)

    Durakoğlugil, Murtaza Emre; Kocaman, Sinan Altan; Ciçek, Yüksel; Cetin, Mustafa

    2012-12-01

    Exercise electrocardiography (ECG) is one of the most commonly utilized tests in cardiology. Despite the drawbacks, exercise ECG is widely preferred due to low cost, standardization, and strong prognostic information. A prolonged PR interval during recovery has recently been proposed as an indicator of mortality. Herein, we report an interesting case of a patient who presented with the complaint of exertional dyspnea and exhibited PR lengthening during the recovery period on the exercise ECG. The patient had a PR interval of 240 ms before exercise, which decreased to 160 ms at peak stress. However, during recovery, the PR interval prolonged gradually, reaching 320 ms at the second minute and persisting at that length until the end of the recovery period. The patient achieved 87% of the age predicted maximum heart rate, and experienced non-disabling shortness of breath and a pressure sensation in the chest, with no apparent ST segment depression. Recovery parameters, including heart rate recovery and systolic blood pressure recovery, were also within normal limits. The patient underwent coronary angiography with the suspicion of CAD which revealed severe multi-vessel disease. This rare case emphasizes the importance of PR lengthening in the recovery period as a sign of severe ischemia, in addition to other signs, such as prominent ST-segment changes, chronotropic incompetence, impaired hemodynamic response, and poor exercise capacity during stress ECG evaluation.

  8. Energy balance for uranium recovery from seawater

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, E.; Lindner, H. [The University of Texas, 1 University Station C2200, Austin, TX 78712 (United States)

    2013-07-01

    The energy return on investment (EROI) of an energy resource is the ratio of the energy it ultimately produces to the energy used to recover it. EROI is a key viability measure for a new recovery technology, particularly in its early stages of development when financial cost assessment would be premature or highly uncertain. This paper estimates the EROI of uranium recovery from seawater via a braid adsorbent technology. In this paper, the energy cost of obtaining uranium from seawater is assessed by breaking the production chain into three processes: adsorbent production, adsorbent deployment and mooring, and uranium elution and purification. Both direct and embodied energy inputs are considered. Direct energy is the energy used by the processes themselves, while embodied energy is used to fabricate their material, equipment or chemical inputs. If the uranium is used in a once-through fuel cycle, the braid adsorbent technology EROI ranges from 12 to 27, depending on still-uncertain performance and system design parameters. It is highly sensitive to the adsorbent capacity in grams of U captured per kg of adsorbent as well as to potential economies in chemical use. This compares to an EROI of ca. 300 for contemporary terrestrial mining. It is important to note that these figures only consider the mineral extraction step in the fuel cycle. At a reference performance level of 2.76 g U recovered per kg adsorbent immersed, the largest energy consumers are the chemicals used in adsorbent production (63%), anchor chain mooring system fabrication and operations (17%), and unit processes in the adsorbent production step (12%). (authors)

  9. A case-study of landfill minimization and material recovery via waste co-gasification in a new waste management scheme.

    Science.gov (United States)

    Tanigaki, Nobuhiro; Ishida, Yoshihiro; Osada, Morihiro

    2015-03-01

    This study evaluates municipal solid waste co-gasification technology and a new solid waste management scheme, which can minimize final landfill amounts and maximize material recycled from waste. This new scheme is considered for a region where bottom ash and incombustibles are landfilled or not allowed to be recycled due to their toxic heavy metal concentration. Waste is processed with incombustible residues and an incineration bottom ash discharged from existent conventional incinerators, using a gasification and melting technology (the Direct Melting System). The inert materials, contained in municipal solid waste, incombustibles and bottom ash, are recycled as slag and metal in this process as well as energy recovery. Based on this new waste management scheme with a co-gasification system, a case study of municipal solid waste co-gasification was evaluated and compared with other technical solutions, such as conventional incineration, incineration with an ash melting facility under certain boundary conditions. From a technical point of view, co-gasification produced high quality slag with few harmful heavy metals, which was recycled completely without requiring any further post-treatment such as aging. As a consequence, the co-gasification system had an economical advantage over other systems because of its material recovery and minimization of the final landfill amount. Sensitivity analyses of landfill cost, power price and inert materials in waste were also conducted. The higher the landfill costs, the greater the advantage of the co-gasification system has. The co-gasification was beneficial for landfill cost in the range of 80 Euro per ton or more. Higher power prices led to lower operation cost in each case. The inert contents in processed waste had a significant influence on the operating cost. These results indicate that co-gasification of bottom ash and incombustibles with municipal solid waste contributes to minimizing the final landfill amount and has

  10. Improving sample recovery

    International Nuclear Information System (INIS)

    Blanchard, R.J.

    1995-09-01

    This Engineering Task Plan (ETP) describes the tasks, i.e., tests, studies, external support and modifications planned to increase the recovery of the recovery of the waste tank contents using combinations of improved techniques, equipment, knowledge, experience and testing to better the recovery rates presently being experienced

  11. Thermodynamic and thermoeconomic analyses of seawater reverse osmosis desalination plant with energy recovery

    International Nuclear Information System (INIS)

    El-Emam, Rami Salah; Dincer, Ibrahim

    2014-01-01

    This paper investigates the performance of a RO (reverse osmosis) desalination plant at different seawater salinity values. An energy recovery Pelton turbine is integrated with the desalination plant. Thermodynamic analysis, based on the first and second laws of thermodynamics, as well as a thermo-based economic analysis is performed for the proposed system. The effects of the system components irreversibilities on the economics and cost of product water are parametrically studied through the thermoeconomic analysis. The exergy analysis shows that large irreversibilities occur in the high pressure pump and in the RO module. Both thermodynamic and thermoeconomic performances of the overall system are investigated under different operating parameters. For the base case; the system achieves an exergy efficiency of 5.82%. The product cost is estimated to be 2.451 $/m 3 and 54.2 $/MJ when source water with salinity of 35,000 ppm is fed to the system. - Highlights: • Thermodynamic and exergoeconomic analyses are performed for SWRO with energy recovery. • Parametric studies are done to study effects of operating conditions on performance. • Different seawater sources with different salinity values are tested. • At base case, plant exergy efficiency is 5.82% and product cost is 2.451 $/m 3

  12. The recovery of sulphur, uranium and gold from residues in OFS scheme

    International Nuclear Information System (INIS)

    Ruhmer, W.T.; Botha, F.; Adams, J.S.

    1978-01-01

    This article describes a project comprising three plants for the flotation of pyrite, a twin-stream uranium plant in which high-grade slimes and pyrite can be leached separately, a pyrite burning sulphuric acid plant, and a plant for the recovery of gold from calcines. Details of these plants including capital costs and estimate production are given

  13. A Thermal Energy Recovery System and its Applications in Building (A Short Comunication

    Directory of Open Access Journals (Sweden)

    Afsane Chavoshani

    2016-01-01

    Full Text Available In this paper a heat recovery system from oil heater as a water heater is proposed and analyzed. The potential of heat recovery is studied technically and economically. A model was built and experiments on it are discussed. Recovery of waste heat from the oil heater stack and its application in building is proven to be economically beneficial. The most part of this apparatus was a double-walled tanks and oil heater stack act as firebox for water heater. This tank with 200 liters volume was made of galvanized iron sheets and painted with black color for adsorption of solar radiation. The tank of water heater was filled with 12-15○C water. Sampling was performed at 8 in the morning to 8 at night during one week. The analysis results show that the heat recovery system is recognized as a well option for the examined residential building from both economic and environmental points of view. With the operation considering optimal economic benefits, cost is reduced by about 50%. With maximizing the environmental advantages, CO2 emissions are decreased.

  14. Cost Engineering Techniques and Their Applicability for Cost Estimation of Organic Rankine Cycle Systems

    Directory of Open Access Journals (Sweden)

    Sanne Lemmens

    2016-06-01

    Full Text Available The potential of organic Rankine cycle (ORC systems is acknowledged by both considerable research and development efforts and an increasing number of applications. Most research aims at improving ORC systems through technical performance optimization of various cycle architectures and working fluids. The assessment and optimization of technical feasibility is at the core of ORC development. Nonetheless, economic feasibility is often decisive when it comes down to considering practical instalments, and therefore an increasing number of publications include an estimate of the costs of the designed ORC system. Various methods are used to estimate ORC costs but the resulting values are rarely discussed with respect to accuracy and validity. The aim of this paper is to provide insight into the methods used to estimate these costs and open the discussion about the interpretation of these results. A review of cost engineering practices shows there has been a long tradition of industrial cost estimation. Several techniques have been developed, but the expected accuracy range of the best techniques used in research varies between 10% and 30%. The quality of the estimates could be improved by establishing up-to-date correlations for the ORC industry in particular. Secondly, the rapidly growing ORC cost literature is briefly reviewed. A graph summarizing the estimated ORC investment costs displays a pattern of decreasing costs for increasing power output. Knowledge on the actual costs of real ORC modules and projects remains scarce. Finally, the investment costs of a known heat recovery ORC system are discussed and the methodologies and accuracies of several approaches are demonstrated using this case as benchmark. The best results are obtained with factorial estimation techniques such as the module costing technique, but the accuracies may diverge by up to +30%. Development of correlations and multiplication factors for ORC technology in particular is

  15. The cost and feasibility of marine coastal restoration.

    Science.gov (United States)

    Bayraktarov, Elisa; Saunders, Megan I; Abdullah, Sabah; Mills, Morena; Beher, Jutta; Possingham, Hugh P; Mumby, Peter J; Lovelock, Catherine E

    2016-06-01

    Land-use change in the coastal zone has led to worldwide degradation of marine coastal ecosystems and a loss of the goods and services they provide. Restoration is the process of assisting the recovery of an ecosystem that has been degraded, damaged, or destroyed and is critical for habitats where natural recovery is hindered. Uncertainties about restoration cost and feasibility can impede decisions on whether, what, how, where, and how much to restore. Here, we perform a synthesis of 235 studies with 954 observations from restoration or rehabilitation projects of coral reefs, seagrass, mangroves, salt-marshes, and oyster reefs worldwide, and evaluate cost, survival of restored organisms, project duration, area, and techniques applied. Findings showed that while the median and average reported costs for restoration of one hectare of marine coastal habitat were around US$80000 (2010) and US$1600000 (2010), respectively, the real total costs (median) are likely to be two to four times higher. Coral reefs and seagrass were among the most expensive ecosystems to restore. Mangrove restoration projects were typically the largest and the least expensive per hectare. Most marine coastal restoration projects were conducted in Australia, Europe, and USA, while total restoration costs were significantly (up to 30 times) cheaper in countries with developing economies. Community- or volunteer-based marine restoration projects usually have lower costs. Median survival of restored marine and coastal organisms, often assessed only within the first one to two years after restoration, was highest for saltmarshes (64.8%) and coral reefs (64.5%) and lowest for seagrass (38.0%). However, success rates reported in the scientific literature could be biased towards publishing successes rather than failures. The majority of restoration projects were short-lived and seldom reported monitoring costs. Restoration success depended primarily on the ecosystem, site selection, and techniques

  16. Integrated Energy & Emission Management for Heavy-Duty Diesel Engines with Waste Heat Recovery System

    NARCIS (Netherlands)

    Willems, F.P.T.; Kupper, F.; Cloudt, R.P.M.

    2012-01-01

    This study presents an integrated energy and emission management strategy for an Euro-VI diesel engine with Waste Heat Recovery (WHR) system. This Integrated Powertrain Control (IPC) strategy optimizes the CO2-NOx trade-off by minimizing the operational costs associated with fuel and AdBlue

  17. Recovery of succinic acid produced by fermentation of a metabolically engineered Mannheimia succiniciproducens strain.

    Science.gov (United States)

    Song, Hyohak; Huh, Yun Suk; Lee, Sang Yup; Hong, Won Hi; Hong, Yeon Ki

    2007-12-01

    There have recently been much advances in the production of succinic acid, an important four-carbon dicarboxylic acid for many industrial applications, by fermentation of several natural and engineered bacterial strains. Mannheimia succiniciproducens MBEL55E isolated from bovine rumen is able to produce succinic acid with high efficiency, but also produces acetic, formic and lactic acids just like other anaerobic succinic acid producers. We recently reported the development of an engineered M. succiniciproducens LPK7 strain which produces succinic acid as a major fermentation product while producing much reduced by-products. Having an improved succinic acid producer developed, it is equally important to develop a cost-effective downstream process for the recovery of succinic acid. In this paper, we report the development of a simpler and more efficient method for the recovery of succinic acid. For the recovery of succinic acid from the fermentation broth of LPK7 strain, a simple process composed of a single reactive extraction, vacuum distillation, and crystallization yielded highly purified succinic acid (greater than 99.5% purity, wt%) with a high yield of 67.05wt%. When the same recovery process or even multiple reactive extraction steps were applied to the fermentation broth of MBEL55E, lower purity and yield of succinic acid were obtained. These results suggest that succinic acid can be purified in a cost-effective manner by using the fermentation broth of engineered LPK7 strain, showing the importance of integrating the strain development, fermentation and downstream process for optimizing the whole processes for succinic acid production.

  18. STEM Faculty and Indirect Costs: What Administrators Need to Know

    Science.gov (United States)

    Gossman, Susan

    2016-01-01

    The focus of this single site, qualitative case study was on public research university STEM (science, technology, engineering and mathematics) faculty and their perspectives on, and behavior towards, indirect cost recovery. The explanatory scheme was derived from anthropological theory and incorporated organizational culture, resource dependency…

  19. Calculating the consequences of recovery, a European model for inhabited areas

    DEFF Research Database (Denmark)

    Charnock, T.W.; Jones, J.A.; Singer, L.N.

    2009-01-01

    The European Model for Inhabited Areas (ERMIN) was developed to allow a user to explore different recovery options following the contamination of an urban environment with radioactive material and to refine an appropriate strategy for the whole region affected. The input data include a description......, the contamination on urban surfaces, the activity concentration in air from resuspension, the doses to workers undertaking the recovery work, the quantity and activity of waste generated and the cost and work required to implement the countermeasure. ERMIN has been designed to be implemented as a tool that supports...... the approach of decision-makers and allows the area to be broken down into smaller regions where different conditions prevail and different countermeasure packages are enacted....

  20. Recovery of noble metals from fission products

    International Nuclear Information System (INIS)

    Jenson, G.A.; Platt, A.M.; Mellinger, G.B.; Bjorklund, W.J.

    1982-11-01

    Scoping studies were started in 1979 to develop a cost-effective, waste-management-compatible process to extract noble metals from fission products. The process, involving the reaction with glassmelting chemicals, a metal oxide (PbO), and a reducing agent (charcoal), was demonstrated for recovering noble metals from simulated high-level waste oxides. The process has now been demonstrated on a laboratory scale (100 g) using irradiated fuels. Recoveries in the recovered lead averaged 80% for Pd, 60% for Rh, and 14% Ru. The resulting glass product was homogeneous in appearance, and the chemical durability was comparable to other waste oxides

  1. Cost (non)-recovery by platform technology facilities in the Bio21 Cluster.

    Science.gov (United States)

    Gibbs, Gerard; Clark, Stella; Quinn, Julieanne; Gleeson, Mary Joy

    2010-04-01

    Platform technologies (PT) are techniques or tools that enable a range of scientific investigations and are critical to today's advanced technology research environment. Once installed, they require specialized staff for their operations, who in turn, provide expertise to researchers in designing appropriate experiments. Through this pipeline, research outputs are raised to the benefit of the researcher and the host institution. Platform facilities provide access to instrumentation and expertise for a wide range of users beyond the host institution, including other academic and industry users. To maximize the return on these substantial public investments, this wider access needs to be supported. The question of support and the mechanisms through which this occurs need to be established based on a greater understanding of how PT facilities operate. This investigation was aimed at understanding if and how platform facilities across the Bio21 Cluster meet operating costs. Our investigation found: 74% of platforms surveyed do not recover 100% of direct operating costs and are heavily subsidized by their home institution, which has a vested interest in maintaining the technology platform; platform managers play a major role in establishing the costs and pricing of the facility, normally in a collaborative process with a management committee or institutional accountant; and most facilities have a three-tier pricing structure recognizing internal academic, external academic, and commercial clients.

  2. The Role of Capital Productivity in British Airways' Financial Recovery

    Science.gov (United States)

    Morrell, Peter

    1999-01-01

    British Airways (BA) was privatised in 1987, but its financial recovery occurred a number of years earlier. This recovery was sustained throughout the early 1990s economic recession, a period when few major airlines were operating profitably. This paper examines the role of productivity developments at British Airways from the early 1980s through 1996. The emphasis is on capital productivity and investment, but changes in capital intensity and labour productivity are also evaluated. Various measures are considered for both capital and labour productivity: outputs are measured in available tonne-kms (ATKS) and revenue tonne-kms (RTKs), with the former preferred over the latter two measures, after adjustment for work performed by BA for others. Capital inputs are measured in equivalent lease costs adjusted to constant prices with a different treatment of flight and ground equipment or assets. Labour inputs are derived from total payroll costs deflated by a UK wage price index. The airline made considerable capital investments over the period and at the same time went through two major processes of labour restructuring. This resulted in a gradual increase in capital intensity, relative high labour productivity growth, but poor capital productivity performance. However, capital investment played an important role in the airline's sustained labour and total factor productivity over the whole period.

  3. Advanced Oil Recovery Technologies for Improved Recovery from Slope Basin Clastic Reservoirs, Nash Draw Brushy Canyon Pool, Eddy County, NM

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, Mark B.

    1999-02-24

    The Nash Draw Brushy Canyon Pool in Eddy County New Mexico is a cost-shared field demonstration project in the US Department of Energy Class II Program. A major goal of the Class III Program is to stimulate the use of advanced technologies to increase ultimate recovery from slope-basin clastic reservoirs. Advanced characterization techniques are being used at the Nash Draw project to develop reservoir management strategies for optimizing oil recovery from this Delaware reservoir. Analysis, interpretation, and integration of recently acquired geologic, geophysical, and engineering data revealed that the initial reservoir characterization was too simplistic to capture the critical features of this complex formation. Contrary to the initial characterization, a new reservoir description evolved that provided sufficient detail regarding the complexity of the Brushy Canyon interval at Nash Draw. This new reservoir description is being used as a risk reduction tool to identify ''sweet spots'' for a development drilling program as well as to evaluate pressure maintenance strategies. The reservoir characterization, geological modeling, 3-D seismic interpretation, and simulation studies have provided a detailed model of the Brushy Canyon zones. This model was used to predict the success of different reservoir management scenarios and to aid in determining the most favorable combination of targeted drilling, pressure maintenance, well simulation, and well spacing to improve recovery from this reservoir.

  4. Uranium from sea-water. Possibilities of recovery, exploiting slow coastal currents

    International Nuclear Information System (INIS)

    Bettinali, C.; Pantanetti, F.

    1976-01-01

    The authors analyse the interest in uranium recovery from sea-water within the framework of uranium world supply problems. The most reliable methods proposed for recovery are summarized and discussed, both from the chemical and the plant project points of view. Tides as a source of energy for water movement cannot be used in the Mediterranean and therefore only currents can be taken into account. The acceptable cost of an exchanger, in relation to the uranium price, is considered and related to known exchangers. The characteristics of exchanging elements are examined and the influence of the speed of sea currents discussed. The extractable uranium is a function of the exchange rate and of the speed of the flow inside the exchanging system; therefore it is quite clear that the current speed is not a prerequisite and that coastal currents around Italy are suitable. Exchanging elements built with sheets parallel to the flow, exchanging pans containing granular or fibrous exchangers have been considered. The main characteristics of a 1000 t/a plant are discussed considering different possibilities. The most acceptable seems to be the continuous extraction system. The parameters needed to calculate the dimensions of such a plant are given and the relation between the length and speed of the moving chain discussed. A rough economic evaluation of the plant cost - starting from known technologies - and of the final cost of the uranium oxide produced is made. (author)

  5. Prioritizing material recovery for end-of-life printed circuit boards

    International Nuclear Information System (INIS)

    Wang Xue; Gaustad, Gabrielle

    2012-01-01

    Highlights: ► Material recovery driven by composition, choice of ranking, and weighting. ► Economic potential for new recycling technologies quantified for several metrics. ► Indicators developed for materials incurring high eco-toxicity costs. ► Methodology useful for a variety of stakeholders, particularly policy-makers. - Abstract: The increasing growth in generation of electronic waste (e-waste) motivates a variety of waste reduction research. Printed circuit boards (PCBs) are an important sub-set of the overall e-waste stream due to the high value of the materials contained within them and potential toxicity. This work explores several environmental and economic metrics for prioritizing the recovery of materials from end-of-life PCBs. A weighted sum model is used to investigate the trade-offs among economic value, energy saving potentials, and eco-toxicity. Results show that given equal weights for these three sustainability criteria gold has the highest recovery priority, followed by copper, palladium, aluminum, tin, lead, platinum, nickel, zinc, and silver. However, recovery priority will change significantly due to variation in the composition of PCBs, choice of ranking metrics, and weighting factors when scoring multiple metrics. These results can be used by waste management decision-makers to quantify the value and environmental savings potential for recycling technology development and infrastructure. They can also be extended by policy-makers to inform possible penalties for land-filling PCBs or exporting to the informal recycling sector. The importance of weighting factors when examining recovery trade-offs, particularly for policies regarding PCB collection and recycling are explored further.

  6. Design and evaluation of fluidized bed heat recovery for diesel engine systems

    Science.gov (United States)

    Hamm, J. R.; Newby, R. A.; Vidt, E. J.; Lippert, T. E.

    1985-01-01

    The potential of utilizing fluidized bed heat exchangers in place of conventional counter-flow heat exchangers for heat recovery from adiabatic diesel engine exhaust gas streams was studied. Fluidized bed heat recovery systems were evaluated in three different heavy duty transport applications: (1) heavy duty diesel truck; (2) diesel locomotives; and (3) diesel marine pushboat. The three applications are characterized by differences in overall power output and annual utilization. For each application, the exhaust gas source is a turbocharged-adiabatic diesel core. Representative subposed exhaust gas heat utilization power cycles were selected for conceptual design efforts including design layouts and performance estimates for the fluidized bed heat recovery heat exchangers. The selected power cycles were: organic rankine with RC-1 working fluid, turbocompound power turbine with steam injection, and stirling engine. Fuel economy improvement predictions are used in conjunction with capital cost estimates and fuel price data to determine payback times for the various cases.

  7. Container corporation: The financial, management, and operating implications of a universal beverage container recovery system: Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This report contains an overview of the system. It discusses containers and container materials, elements of the system, and the container recovery cost structure. It includes a financial evaluation and addresses issues of implementation.

  8. Nuclear technology and mineral recovery

    International Nuclear Information System (INIS)

    Stewart, Richard M.; Niermeyer, Karl E.

    1970-01-01

    is in situ leaching, often mentioned in conjunct with nuclear blasting. In situ leaching has been practiced for years in underground copper mines throughout the world. Ground which has been fragmented due to subsidence over old mined-out areas and low-grade mineralization, which has remained after block caving operations, has been leached successfully. In a nuclear in situ operation we intentionally fragment the rock and then leach it to extract the values. Most of the development work for a solution collection system in old mine areas and block caved areas had been done during the original mining operations, which paid for driving these openings. In virgin ground, the cost of this development work must be borne by the in situ leaching operation. We know that in situ leaching as a method for the extraction of copper values is physically feasible. We need to know if the nuclear in situ method is economically feasible. The answers to questions of total recovery, rate of recovery, contamination, etc., must be found so that we know if we are talking of mineralized zones or orebodies

  9. Nuclear technology and mineral recovery

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Richard M; Niermeyer, Karl E [Anaconda Company, Salt Lake City, UT (United States)

    1970-05-15

    is in situ leaching, often mentioned in conjunct with nuclear blasting. In situ leaching has been practiced for years in underground copper mines throughout the world. Ground which has been fragmented due to subsidence over old mined-out areas and low-grade mineralization, which has remained after block caving operations, has been leached successfully. In a nuclear in situ operation we intentionally fragment the rock and then leach it to extract the values. Most of the development work for a solution collection system in old mine areas and block caved areas had been done during the original mining operations, which paid for driving these openings. In virgin ground, the cost of this development work must be borne by the in situ leaching operation. We know that in situ leaching as a method for the extraction of copper values is physically feasible. We need to know if the nuclear in situ method is economically feasible. The answers to questions of total recovery, rate of recovery, contamination, etc., must be found so that we know if we are talking of mineralized zones or orebodies.

  10. Methods to maximise recovery of environmental DNA from water samples.

    Directory of Open Access Journals (Sweden)

    Rheyda Hinlo

    Full Text Available The environmental DNA (eDNA method is a detection technique that is rapidly gaining credibility as a sensitive tool useful in the surveillance and monitoring of invasive and threatened species. Because eDNA analysis often deals with small quantities of short and degraded DNA fragments, methods that maximize eDNA recovery are required to increase detectability. In this study, we performed experiments at different stages of the eDNA analysis to show which combinations of methods give the best recovery rate for eDNA. Using Oriental weatherloach (Misgurnus anguillicaudatus as a study species, we show that various combinations of DNA capture, preservation and extraction methods can significantly affect DNA yield. Filtration using cellulose nitrate filter paper preserved in ethanol or stored in a -20°C freezer and extracted with the Qiagen DNeasy kit outperformed other combinations in terms of cost and efficiency of DNA recovery. Our results support the recommendation to filter water samples within 24hours but if this is not possible, our results suggest that refrigeration may be a better option than freezing for short-term storage (i.e., 3-5 days. This information is useful in designing eDNA detection of low-density invasive or threatened species, where small variations in DNA recovery can signify the difference between detection success or failure.

  11. Rapid Recovery Gene Downregulation during Excess-Light Stress and Recovery in Arabidopsis.

    Science.gov (United States)

    Crisp, Peter A; Ganguly, Diep R; Smith, Aaron B; Murray, Kevin D; Estavillo, Gonzalo M; Searle, Iain; Ford, Ethan; Bogdanović, Ozren; Lister, Ryan; Borevitz, Justin O; Eichten, Steven R; Pogson, Barry J

    2017-08-01

    Stress recovery may prove to be a promising approach to increase plant performance and, theoretically, mRNA instability may facilitate faster recovery. Transcriptome (RNA-seq, qPCR, sRNA-seq, and PARE) and methylome profiling during repeated excess-light stress and recovery was performed at intervals as short as 3 min. We demonstrate that 87% of the stress-upregulated mRNAs analyzed exhibit very rapid recovery. For instance, HSP101 abundance declined 2-fold every 5.1 min. We term this phenomenon rapid recovery gene downregulation (RRGD), whereby mRNA abundance rapidly decreases promoting transcriptome resetting. Decay constants ( k ) were modeled using two strategies, linear and nonlinear least squares regressions, with the latter accounting for both transcription and degradation. This revealed extremely short half-lives ranging from 2.7 to 60.0 min for 222 genes. Ribosome footprinting using degradome data demonstrated RRGD loci undergo cotranslational decay and identified changes in the ribosome stalling index during stress and recovery. However, small RNAs and 5'-3' RNA decay were not essential for recovery of the transcripts examined, nor were any of the six excess light-associated methylome changes. We observed recovery-specific gene expression networks upon return to favorable conditions and six transcriptional memory types. In summary, rapid transcriptome resetting is reported in the context of active recovery and cellular memory. © 2017 American Society of Plant Biologists. All rights reserved.

  12. Relationship Between Magnitude of Applied Spin Recovery Moment and Ensuing Number of Recovery Turns

    Science.gov (United States)

    Anglin, Ernie L.

    1967-01-01

    An analytical study has been made to investigate the relationship between the magnitude of the applied spin recovery moment and the ensuing number of turns made during recovery from a developed spin with a view toward determining how to interpolate or extrapolate spin recovery results with regard to determining the amount of control required for a satisfactory recovery. Five configurations were used which are considered to be representative of modern airplanes: a delta-wing fighter, a stub-wing research vehicle, a boostglide configuration, a supersonic trainer, and a sweptback-wing fighter. The results obtained indicate that there is a direct relationship between the magnitude of the applied spin recovery moments and the ensuing number of recovery turns made and that this relationship can be expressed in either simple multiplicative or exponential form. Either type of relationship was adequate for interpolating or extrapolating to predict turns required for recovery with satisfactory accuracy for configurations having relatively steady recovery motions. Any two recoveries from the same developed spin condition can be used as a basis for the predicted results provided these recoveries are obtained with the same ratio of recovery control deflections. No such predictive method can be expected to give satisfactory results for oscillatory recoveries.

  13. Biodiesel production process from microalgae oil by waste heat recovery and process integration.

    Science.gov (United States)

    Song, Chunfeng; Chen, Guanyi; Ji, Na; Liu, Qingling; Kansha, Yasuki; Tsutsumi, Atsushi

    2015-10-01

    In this work, the optimization of microalgae oil (MO) based biodiesel production process is carried out by waste heat recovery and process integration. The exergy analysis of each heat exchanger presented an efficient heat coupling between hot and cold streams, thus minimizing the total exergy destruction. Simulation results showed that the unit production cost of optimized process is 0.592$/L biodiesel, and approximately 0.172$/L biodiesel can be avoided by heat integration. Although the capital cost of the optimized biodiesel production process increased 32.5% and 23.5% compared to the reference cases, the operational cost can be reduced by approximately 22.5% and 41.6%. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. HYBRID SULFUR RECOVERY PROCESS FOR NATURAL GAS UPGRADING

    International Nuclear Information System (INIS)

    Girish Srinivas; Steven C. Gebhard; David W. DeBerry

    2002-01-01

    This first quarter report of 2002 describes progress on a project funded by the U.S. Department of Energy (DOE) to test a hybrid sulfur recovery process for natural gas upgrading. The process concept represents a low cost option for direct treatment of natural gas streams to remove H(sub 2)S in quantities equivalent to 0.2-25 metric tons (LT) of sulfur per day. This process is projected to have lower capital and operating costs than the competing technologies, amine/aqueous iron liquid redox and amine/Claus/tail gas treating, and have a smaller plant footprint, making it well suited to both on-shore and offshore applications. CrystaSulf(sup SM) (service mark of CrystaTech, Inc.) is a new nonaqueous sulfur recovery process that removes hydrogen sulfide (H(sub 2)S) from gas streams and converts it into elemental sulfur. CrystaSulf features high sulfur recovery similar to aqueous-iron liquid redox sulfur recovery processes, but differs from the aqueous processes in that CrystaSulf controls the location where elemental sulfur particles are formed. In the hybrid process, approximately 1/3 of the total H(sub 2)S in the natural gas is first oxidized to SO(sub 2) at low temperatures over a heterogeneous catalyst. Low temperature oxidation is done so that the H(sub 2)S can be oxidized in the presence of methane and other hydrocarbons without oxidation of the hydrocarbons. The project involves the development of a catalyst using laboratory/bench-scale catalyst testing, and then demonstration of the catalyst at CrystaTech's pilot plant in west Texas. In a previous reporting period tests were done to determine the effect of hydrocarbons such as n-hexane on catalyst performance with and without H(sub 2)S present. The experiments showed that hexane oxidation is suppressed when H(sub 2)S is present. Hexane represents the most reactive of the C1 to C6 series of alkanes. Since hexane exhibits low reactivity under H(sub 2)S oxidation conditions, and more importantly, does not change

  15. Solid municipal waste processing plants: Cost benefit analysis

    International Nuclear Information System (INIS)

    Gerardi, V.

    1992-01-01

    This paper performs cost benefit analyses on three solid municipal waste processing alternatives with plants of diverse daily outputs. The different processing schemes include: selected wastes incineration with the production of refuse derived fuels; selected wastes incineration with the production of refuse derived fuels and compost; pyrolysis with energy recovery in the form of electric power. The plant daily outputs range from 100 to 300 tonnes for the refuse derived fuel alternatives, and from 200 to 800 tonnes for the pyrolysis/power generation scheme. The cost analyses consider investment periods of fifteen years in duration and interest rates of 5%

  16. Heavy Duty Roots Expander Heat Energy Recovery (HD-REHER)

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, Swami [Eaton Corporation, Menomonee Falls, WI (United States)

    2015-10-01

    Eaton Corporation proposed a comprehensive project to develop and demonstrate advanced component technology that will reduce the cost of implementing Organic Rankine Cycle (ORC) Waste Heat Recovery (WHR) systems to Heavy-Duty Diesel engines, making adaptation of this fuel efficiency improving technology more commercially attractive to end-users in the next 5 to 10 year time period. Accelerated adaptation and implementation of new fuel efficiency technology into service is critical for reduction of fuel used in the commercial vehicle segment.

  17. The recovery of sulphur, uranium, and gold from residues

    International Nuclear Information System (INIS)

    Ruhmer, W.T.; Botha, F.; Adams, J.S.

    1977-01-01

    The report describes the Amuran project in the Welkom area, which is being conducted by six members of the Anglo American Group. The project comprises three plants for the flotation of pyrite, a twin-stream uranium plant for the recovery of gold from calcines. Details of these plants including capital costs and estimated production are given. Mention is made of the adsorption of gold onto activated charcoal and wet high-intensity magnetic separation as possible suitable processes for these residues [af

  18. 76 FR 72003 - Calendar Year 2011 Cost of Outpatient Medical, Dental, and Cosmetic Surgery Services Furnished by...

    Science.gov (United States)

    2011-11-21

    ... Cosmetic Surgery Services Furnished by Department of Defense Medical Treatment Facilities; Certain Rates... recovery from tortiously liable third persons for the cost of outpatient medical, dental, and cosmetic... of the full cost of all services provided. The outpatient medical, dental, and cosmetic surgery...

  19. 76 FR 15349 - Fiscal Year 2010 Cost of Outpatient Medical, Dental, and Cosmetic Surgery Services Furnished by...

    Science.gov (United States)

    2011-03-21

    ... OFFICE OF MANAGEMENT AND BUDGET Fiscal Year 2010 Cost of Outpatient Medical, Dental, and Cosmetic Surgery Services Furnished by Department of Defense Medical Treatment Facilities; Certain Rates Regarding... recovery from tortiously liable third persons for the cost of outpatient medical, dental and cosmetic...

  20. Performance Efficient Launch Vehicle Recovery and Reuse

    Science.gov (United States)

    Reed, John G.; Ragab, Mohamed M.; Cheatwood, F. McNeil; Hughes, Stephen J.; Dinonno, J.; Bodkin, R.; Lowry, Allen; Brierly, Gregory T.; Kelly, John W.

    2016-01-01

    For decades, economic reuse of launch vehicles has been an elusive goal. Recent attempts at demonstrating elements of launch vehicle recovery for reuse have invigorated a debate over the merits of different approaches. The parameter most often used to assess the cost of access to space is dollars-per-kilogram to orbit. When comparing reusable vs. expendable launch vehicles, that ratio has been shown to be most sensitive to the performance lost as a result of enabling the reusability. This paper will briefly review the historical background and results of recent attempts to recover launch vehicle assets for reuse. The business case for reuse will be reviewed, with emphasis on the performance expended to recover those assets, and the practicality of the most ambitious reuse concept, namely propulsive return to the launch site. In 2015, United Launch Alliance (ULA) announced its Sensible, Modular, Autonomous Return Technology (SMART) reuse plan for recovery of the booster module for its new Vulcan launch vehicle. That plan employs a non-propulsive approach where atmospheric entry, descent and landing (EDL) technologies are utilized. Elements of such a system have a wide variety of applications, from recovery of launch vehicle elements in suborbital trajectories all the way to human space exploration. This paper will include an update on ULA's booster module recovery approach, which relies on Hypersonic Inflatable Aerodynamic Decelerator (HIAD) and Mid-Air Retrieval (MAR) technologies, including its concept of operations (ConOps). The HIAD design, as well as parafoil staging and MAR concepts, will be discussed. Recent HIAD development activities and near term plans including scalability, next generation materials for the inflatable structure and heat shield, and gas generator inflation systems will be provided. MAR topics will include the ConOps for recovery, helicopter selection and staging, and the state of the art of parachute recovery systems using large parafoils

  1. Defense waste transportation: cost and logistics studies

    International Nuclear Information System (INIS)

    Andrews, W.B.; Cole, B.M.; Engel, R.L.; Oylear, J.M.

    1982-08-01

    Transportation of nuclear wastes from defense programs is expected to significantly increase in the 1980s and 1990s as permanent waste disposal facilities come into operation. This report uses models of the defense waste transportation system to quantify potential transportation requirements for treated and untreated contact-handled transuranic (CH-TRU) wastes and high-level defense wastes (HLDW). Alternative waste management strategies in repository siting, waste retrieval and treatment, treatment facility siting, waste packaging and transportation system configurations were examined to determine their effect on transportation cost and hardware requirements. All cost estimates used 1980 costs. No adjustments were made for future changes in these costs relative to inflation. All costs are reported in 1980 dollars. If a single repository is used for defense wastes, transportation costs for CH-TRU waste currently in surface storage and similar wastes expected to be generated by the year 2000 were estimated to be 109 million dollars. Recovery and transport of the larger buried volumes of CH-TRU waste will increase CH-TRU waste transportation costs by a factor of 70. Emphasis of truck transportation and siting of multiple repositories would reduce CH-TRU transportation costs. Transportation of HLDW to repositories for 25 years beginning in 1997 is estimated to cost $229 M in 1980 costs and dollars. HLDW transportation costs could either increase or decrease with the selection of a final canister configuration. HLDW transportation costs are reduced when multiple repositories exist and emphasis is placed on truck transport

  2. Optimum design of dual pressure heat recovery steam generator using non-dimensional parameters based on thermodynamic and thermoeconomic approaches

    International Nuclear Information System (INIS)

    Naemi, Sanaz; Saffar-Avval, Majid; Behboodi Kalhori, Sahand; Mansoori, Zohreh

    2013-01-01

    The thermodynamic and thermoeconomic analyses are investigated to achieve the optimum operating parameters of a dual pressure heat recovery steam generator (HRSG), coupled with a heavy duty gas turbine. In this regard, the thermodynamic objective function including the exergy waste and the exergy destruction, is defined in such a way to find the optimum pinch point, and consequently to minimize the objective function by using non-dimensional operating parameters. The results indicated that, the optimum pinch point from thermodynamic viewpoint is 2.5 °C and 2.1 °C for HRSGs with live steam at 75 bar and 90 bar respectively. Since thermodynamic analysis is not able to consider economic factors, another objective function including annualized installation cost and annual cost of irreversibilities is proposed. To find the irreversibility cost, electricity price and also fuel price are considered independently. The optimum pinch point from thermoeconomic viewpoint on basis of electricity price is 20.6 °C (75 bar) and 19.2 °C (90 bar), whereas according to the fuel price it is 25.4 °C and 23.7 °C. Finally, an extensive sensitivity analysis is performed to compare optimum pinch point for different electricity and fuel prices. -- Highlights: ► Presenting thermodynamic and thermoeconomic optimization of a heat recovery steam generator. ► Defining an objective function consists of exergy waste and exergy destruction. ► Defining an objective function including capital cost and cost of irreversibilities. ► Obtaining the optimized operating parameters of a dual pressure heat recovery boiler. ► Computing the optimum pinch point using non-dimensional operating parameters

  3. Spousal recovery support, recovery experiences, and life satisfaction crossover among dual-earner couples.

    Science.gov (United States)

    Park, YoungAh; Fritz, Charlotte

    2015-03-01

    Research has indicated the importance of recovery from work stress for employee well-being and work engagement. However, very little is known about the specific factors that may support or hinder recovery in the context of dual-earner couples. This study proposes spousal recovery support as a potential resource that dual-earner couples can draw on to enhance their recovery experiences and well-being. It was hypothesized that spousal recovery support would be related to the recipient spouse's life satisfaction via his or her own recovery experiences (i.e., psychological detachment, relaxation, and mastery experiences). The study further investigated the crossover of life satisfaction between working spouses as a potential outcome of recovery processes. Data from 318 full-time employed married couples in South Korea were analyzed using structural equation modeling. Results showed that spousal recovery support was positively related to all 3 recovery experiences of the recipient spouse. Moreover, this recovery support was related to the recipient spouse's life satisfaction via relaxation and mastery experiences. Unexpectedly, psychological detachment was negatively related to life satisfaction, possibly indicating a suppression effect. Life satisfaction crossed over between working spouses. No gender differences were found in the hypothesized paths. Based on these findings, theoretical and practical implications are discussed, and future research directions are presented. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  4. Enhancing energy recovery in the steel industry: Matching continuous charge with off-gas variability smoothing

    International Nuclear Information System (INIS)

    Dal Magro, Fabio; Meneghetti, Antonella; Nardin, Gioacchino; Savino, Stefano

    2015-01-01

    Highlights: • A system based on phase change material is inserted into the off-gas-line of a continuous charge electric arc furnace. • The off-gas temperature profile after scrap preheating is smoothed. • A heat transfer fluid through phase change material containers allows to control overheating issues. • The smoothed off-gas profiles enable efficient downstream power generation. • The recovery system investment cost is decreased due to lower sizes of components. - Abstract: In order to allow an efficient energy recovery from off-gas in the steel industry, the high variability of heat flow should be managed. A temperature smoothing device based on phase change materials at high temperatures is inserted into the off-gas line of a continuous charge electric arc furnace process with scrap preheating. To address overheating issues, a heat transfer fluid flowing through containers is introduced and selected by developing an analytical model. The performance of the smoothing system is analyzed by thermo-fluid dynamic simulations. The reduced maximum temperature of off-gas allows to reduce the size and investment cost of the downstream energy recovery system, while the increased minimum temperature enhances the steam turbine load factor, thus increasing its utilization. Benefits on environmental issues due to dioxins generation are also gained

  5. Measures for waste water management from recovery processing of Zhushanxia uranium deposit

    International Nuclear Information System (INIS)

    Liu Yaochi; Xu Lechang

    2000-01-01

    Measures for waste water management from recovery processing of Zhushanxia uranium deposit of Wengyuan Mine is analyzed, which include improving process flow, recycling process water used in uranium mill as much as possible and choosing a suitable disposing system. All these can decrease the amount of waste water, and also reduce costs of disposing waste water and harm to environment

  6. Energy uses and recovery in sludge disposal, Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J L [Stanford Research Inst., Menlo Park, CA; Bomberger, D C; Lewis, F M

    1977-08-01

    Capital and operating costs were compared for 3 plant capacities having average dry weather flows of 10, 100, and 500 mgd. Five sludge handling options were considered. They were chemical conditioning with vacuum filtration, low pressure wet air oxidation, high pressure wet air oxidation aerobic and anaerobic digestion, and chemical oxidation with filter press dewatering. The plant sizes considered generated 11.5, 77, and 384 TPD of sludge. High pressure wet air oxidation and aerobic digestion operating costs were the most sensitive to electrical power costs, while the 2 incineration options without heat treatment were the least sensitive. Sludge drying and incineration of a 20% solids cake were the most sensitive to fuel costs, while aerobic and anaerobic digestion were not directly affected. Heat treatment of sludge and dewatering to a 40% cake had the lowest fuel requirements of the 3 incineration options but increased the total plant electric power consumption by >25%. The net Btus consumed were compared. The net consumption was lowest for anaerobic digestion, filter press plus incineration, and heat treatment plus incineration. Excluding heat recovery credit except for steam required in sludge heat treating, these 3 options are still lowest in net Btus consumed.

  7. Recovery Act: Billions of Dollars in Education Credits Appear to Be Erroneous. Treasury Inspector General for Tax Administration. Reference Number: 2011-41-083

    Science.gov (United States)

    US Department of the Treasury, 2011

    2011-01-01

    Education credits are available to help offset the costs of higher education for taxpayers, their spouses, and dependents who qualify as eligible students. The American Recovery and Reinvestment Act of 2009 (Recovery Act) amended the Hope Scholarship Tax Credit (Hope Credit) to provide for a refundable tax credit known as the American Opportunity…

  8. LCA and Cost Analysis of Membrane Bioreactor Systems: Influence of Scale, Population Density, Climate, and Methane Recovery

    Science.gov (United States)

    Future changes in drinking and waste water infrastructure need to incorporate a holistic view of the water service sustainability tradeoffs and potential benefits when considering shifts towards new treatment technology, decentralized systems, energy recovery and reuse of treated...

  9. Cardiopulmonary resuscitation: what cost to cheat death?

    Science.gov (United States)

    Lee, K H; Angus, D C; Abramson, N S

    1996-12-01

    To review the various outcomes from cardiopulmonary resuscitation (CPR), the factors that influence these outcomes, the costs associated with CPR, and the application of cost-analyses to CPR. Data used to prepare this article were drawn from published articles and work in progress. Articles were selected for their relevance to the subjects of CPR and cost-analysis by MEDLINE keyword search. The authors extracted all applicable data from the English literature. Cost-analysis studies of CPR programs are limited by the high variation in resources consumed and attribution of cost to these resources. Furthermore, cost projections have not been adjusted to reflect patient-dependent variation in outcome. Variation in the patient's underlying condition, presenting cardiac rhythm, time to provision of definitive CPR, and effective perfusion all influence final outcome and, consequently, influence the cost-effectiveness of CPR programs. Based on cost data from previous studies, preliminary estimates of the cost-effectiveness of CPR programs for all 6-month survivors of a large international multicenter collaborative trial are $406,605.00 per life saved (range $344,314.00 to $966,759.00), and $225,892.00 per quality-adjusted-life-year (range $191,286.00 to $537,088.00). Reported outcome from CPR has varied from reasonable rates of good recovery, including return to full employment to 100% mortality. Appropriate CPR is encouraged, but continued widespread application appears extremely expensive.

  10. Selective Recovery of Metals from Geothermal Brines

    Energy Technology Data Exchange (ETDEWEB)

    Ventura, Susanna [SRI International, Menlo Park, CA (United States); Bhamidi, Srinivas [SRI International, Menlo Park, CA (United States); Hornbostel, Marc [SRI International, Menlo Park, CA (United States); Nagar, Anoop [SRI International, Menlo Park, CA (United States); Perea, Elisabeth [SRI International, Menlo Park, CA (United States)

    2016-12-16

    The objective of this project was to determine the feasibility of developing a new generation of highly selective low-cost ion-exchange resins based on metal-ion imprinted polymers for the separation of metals from geothermal fluids. Expansion of geothermal energy production over the entire U.S. will involve exploitation of low-to-medium temperature thermal waters. Creating value streams from the recovery of critical and near-critical metals from these thermal waters will encourage geothermal expansion. Selective extraction of metals from geothermal fluids is needed to design a cost-effective process for the recovery of lithium and manganese-two near-critical metals with well-known application in the growing lithium battery industry. We have prepared new lithium- and manganese-imprinted polymers in the form of beads by crosslinking polymerization of a metal polymerizable chelate, where the metal acts as a template. Upon leaching out the metal template, the crosslinked polymer is expected to leave cavities defined by the ligand functional group with enhanced selectivity for binding the template metal. We have demonstrated that lithium- and manganese-imprinted polymer beads can be used as selective solid sorbents for the extraction of lithium and manganese from brines. The polymers were tested both in batch extractions and packed bed lab-scale columns at temperatures of 45-100°C. Lithium-imprinted polymers were found to have Li+ adsorption capacity as high as 2.8 mg Li+/g polymer at 45°C. Manganese-imprinted polymers were found to have a Mn2+ adsorption capacity of more than 23 mg Mn2+/g polymer at 75°C. The Li+ extraction efficiency of the Li-imprinted polymer was found to be more that 95% when a brine containing 390 ppm Li+, 410 ppm Na+, and 390 ppm K+ was passed through a packed bed of the polymer in a lab-scale column at 45°C. In brines containing 360 ppm Li

  11. The recovery imperative: a critical examination of mid-life women's recovery from depression.

    Science.gov (United States)

    O'Brien, Wendy

    2012-08-01

    Australia, like other countries in neo-liberal democracies, is grappling with the gendered health 'problem' of depression. More concerning is the issue of recovery and relapse, with depression being the third largest cause of disability-adjusted life years (DALY). In addition, advanced liberal discourses of health position recovery as an exercise of individual responsibility to return to a functioning and productive norm and prevent recurrence. This moral enterprise of health articulates a 'recovery imperative' which overlooks the gendered context which may have created the conditions for women's depression and may in turn impede their recovery. Drawing on insights from governmentality and feminist post-structuralism, the article critically examines the effects of normalized recovery discourses on women's subjectivities. Data for the study were collected between 2005 and 2007 through in-depth interviews with 31 mid-life Australian women. Three key themes; 'in' recovery, 'eight out of ten' recovered, and recovering the authentic self, illustrate how the 'recovery imperative' may be implicated in perpetuating the cycle of recovery and relapse. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Energy-Recovery Linacs for Commercial Radioisotope Production

    International Nuclear Information System (INIS)

    Johnson, Rolland Paul

    2016-01-01

    Most radioisotopes are produced by nuclear reactors or positive ion accelerators, which are expensive to construct and to operate. Photonuclear reactions using bremsstrahlung photon beams from less-expensive electron linacs can generate isotopes of critical interest, but much of the beam energy in a conventional electron linac is dumped at high energy, making unwanted radioactivation. The largest part of this radioactivation may be completely eliminated by applying energy recovery linac technology to the problem with an additional benefit that the energy cost to produce a given amount of isotope is reduced. Consequently, a Superconducting Radio Frequency (SRF) Energy Recovery Linac (ERL) is a path to a more diverse and reliable domestic supply of short-lived, high-value, high-demand isotopes at a cost lower than that of isotopes produced by reactors or positive-ion accelerators. A Jefferson Lab approach to this problem involves a thin photon production radiator, which allows the electron beam to recirculate through rf cavities so the beam energy can be recovered while the spent electrons are extracted and absorbed at a low enough energy to minimize unwanted radioactivation. The thicker isotope photoproduction target is not in the beam. MuPlus, with Jefferson Lab and Niowave, proposed to extend this ERL technology to the commercial world of radioisotope production. In Phase I we demonstrated that 1) the ERL advantage for producing radioisotopes is at high energies (~100 MeV), 2) the range of acceptable radiator thickness is narrow (too thin and there is no advantage relative to other methods and too thick means energy recovery is too difficult), 3) using optics techniques developed under an earlier STTR for collider low beta designs greatly improves the fraction of beam energy that can be recovered (patent pending), 4) many potentially useful radioisotopes can be made with this ERL technique that have never before been available in significant commercial quantities

  13. Energy-Recovery Linacs for Commercial Radioisotope Production

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Rolland Paul [Muplus, Inc., Newport News, VA (United States)

    2016-11-19

    Most radioisotopes are produced by nuclear reactors or positive ion accelerators, which are expensive to construct and to operate. Photonuclear reactions using bremsstrahlung photon beams from less-expensive electron linacs can generate isotopes of critical interest, but much of the beam energy in a conventional electron linac is dumped at high energy, making unwanted radioactivation. The largest part of this radioactivation may be completely eliminated by applying energy recovery linac technology to the problem with an additional benefit that the energy cost to produce a given amount of isotope is reduced. Consequently, a Superconducting Radio Frequency (SRF) Energy Recovery Linac (ERL) is a path to a more diverse and reliable domestic supply of short-lived, high-value, high-demand isotopes at a cost lower than that of isotopes produced by reactors or positive-ion accelerators. A Jefferson Lab approach to this problem involves a thin photon production radiator, which allows the electron beam to recirculate through rf cavities so the beam energy can be recovered while the spent electrons are extracted and absorbed at a low enough energy to minimize unwanted radioactivation. The thicker isotope photoproduction target is not in the beam. MuPlus, with Jefferson Lab and Niowave, proposed to extend this ERL technology to the commercial world of radioisotope production. In Phase I we demonstrated that 1) the ERL advantage for producing radioisotopes is at high energies (~100 MeV), 2) the range of acceptable radiator thickness is narrow (too thin and there is no advantage relative to other methods and too thick means energy recovery is too difficult), 3) using optics techniques developed under an earlier STTR for collider low beta designs greatly improves the fraction of beam energy that can be recovered (patent pending), 4) many potentially useful radioisotopes can be made with this ERL technique that have never before been available in significant commercial quantities

  14. 78 FR 62709 - Calendar Year 2013 Cost of Outpatient Medical, Dental, and Cosmetic Surgery Services Furnished by...

    Science.gov (United States)

    2013-10-22

    ... Cosmetic Surgery Services Furnished by Department of Defense Medical Treatment Facilities; Certain Rates... recovery from tortiously liable third persons for the cost of outpatient medical, dental and cosmetic... of the full cost of all services provided. The CY13 Outpatient Medical, Dental, and Cosmetic Surgery...

  15. Cost-benefit analysis of improved air quality in an office building

    DEFF Research Database (Denmark)

    Djukanovic, R.; Wargocki, Pawel; Fanger, Povl Ole

    2002-01-01

    A cost-benefit analysis of measures to improve air quality in an existing air-conditoned office building (11581 m2, 864 employees) was carried out for hot, temperate and cold climates and for two operating modes: Variable Air Volume (VAV) with economizer; and Constant Air Volume (CAV) with heat...... recovery. The annual energy cost and first cost of the HVAC system were calculat4ed using DOE 2.1E for different levels of air quality (10-50% dissatisfied). This was achieved by changing the outdoor air supply rate and the pollution loads. Previous studies have documented a 1.1% increase in office...

  16. Estimated costs and admissible claims linked to the Prestige oil spill

    International Nuclear Information System (INIS)

    Loureiro, Maria L.; Ribas, Alfonso; Ojea, Elena; Lopez, Edelmiro

    2006-01-01

    The current case study presents an evaluation of the societal costs caused by the Prestige oil spill. We conclude that the economic magnitude of the catastrophe caused by the Prestige oil spill is rather significant. Short-term losses in all affected economic sectors, cleaning and recovery costs, and all environmental losses accountable at this point, add to a lower bound estimate of 770.58 million euro (prices in 2001 currency), excluding all other financial and future possible losses. Such important losses justify future studies that assess potential costs and benefits derived from the application of preventive measures and other contingency plans. (author)

  17. Sodium bicarbonate in-duct injection with sodium sulfate recovery for SO2/NOx control

    International Nuclear Information System (INIS)

    Bennett, R.; Darmstaedter, E.

    1991-01-01

    Dry sodium injection with sodium bicarbonate has been used commercially at industrial sites since the mid 1980's. In the past three years, five full scale commercial demonstrations have been completed on electric utility coal fired units. Up to 75% SO 2 removal with 0-40% NO x removal has been achieved on units equipped with ESPs. Recent slip stream studies have proven up to 90% SO 2 removal and 25% NO x removal when injection is ahead of a baghouse. If dry sodium bicarbonate sorbent injection technology is used prior to a retrofitted baghouse, but after an existing ESP the sodium sulfate by-product/flyash mixture in the baghouse is over 90% Na 2 SO 4 . Simple filtration and crystallization will yield a high value 99% + pure Na 2 SO 4 for sale. In this application, no liquid discharge occurs and potentially no solids discharge, since flyash recovered from the filter is either recycled to the boiler with the coal stream or reinjected into the boiler. EPA IAPCS model Version 4 is modified to project costs for this SO 2 /NO x removal technology when couples with Na 2 SO 4 recovery. In this paper an example is used to show hardware requirements, consumables accountability, by-product recovery rates, capital costs and levelized costs

  18. Case study of an organic Rankine cycle applied for excess heat recovery: Technical, economic and policy matters

    International Nuclear Information System (INIS)

    Lemmens, Sanne; Lecompte, Steven

    2017-01-01

    Highlights: • Case study of an organic Rankine cycle for heat recovery from an industrial kiln. • The costs and financial feasibility of the system are discussed in detail. • The cost structure is most defined by the capital costs, annual costs are limited. • The system is financially feasible, but subsidies remain important. • The results are most sensitive to changes in load hours and electricity price. - Abstract: Many industrial processes inevitably produce excess heat as by-product. Recovering this heat is a matter of waste management and provides opportunities to improve the energy use efficiency. The excess heat can be used for heating purposes (e.g., in processes, or delivered to district heating systems or buildings) or to generate electricity. An increasingly applied technology for industrial excess heat recovery is the organic Rankine cycle (ORC), suitable to recover low-grade heat from 90 °C onwards. Although ORCs are studied intensively, few studies have examined the economics of commissioned ORC systems. This paper investigates a 375 kW_g_r_o_s_s ORC system employed for flue gas heat recovery from an industrial kiln in Flanders, Belgium. The purpose of the study is twofold: providing insight into a practical ORC case; and evaluating the financial feasibility while taking the specific policy circumstances into account. The financial appraisal takes account of the specific technical setup, the diverse costs of the system, the external economic parameters, and the policy circumstances in Europe, Belgium and Flanders. A sensitivity analysis illustrates the influence of each parameter on the results. The analysis demonstrates the dominance of the investment costs (4217 €_2_0_1_3/kW_g_r_o_s_s) in the expenses. Under the valid conditions the investment has a positive financial return, but the financial support from the government is indispensable. Finally, the sensitivity analysis reveals the importance of attaining sufficient load hours and the

  19. Thermoelectrics for waste heat recovery and climate control in automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Maranville, Clay W. [Ford Motor Company, Dearborn, MI (United States); Schmitz, Peter [Ford Forschungszentrum Aachen GmbH, Aachen (Germany)

    2011-07-01

    Thermoelectric (TE) devices have received renewed attention in the past decade for use in light-duty automotive applications. Governmental organizations and private corporations world-wide are sponsoring research at both the basic materials level, as well as for applied research and technology demonstrations. This funding has led to measurable improvement in TE device cost and efficiency, as well as spurring the emergence and growth of a vertically-integrated TE industry. The two broad categories of applications that have been considered for thermoelectrics are power generation through waste-heat recovery and cabin climate control through the use of TE heat pumps. Neither of these uses of TE devices has ever been commercialized in large-scale vehicle applications, in large part due to the challenges of low device efficiency and high costs. While it is still not clear that TEs will emerge as a winner in the marketplace in the near-term, there are several new developments which provide justification for this renewed interest. Among these reasons are increasing electrification of the vehicle fleet, demands from governments and consumers for improvement in fuel economy and reduction in tailpipe CO{sub 2} emissions, and a greater emphasis on occupant comfort. With governments and industry around the world placing substantial financial bets on the promise of this technology to help address national and global concerns for reducing CO{sub 2} and hydrocarbon consumption, it makes sense for the automotive industry to leverage this investment and to re-evaluate TE-based technology for use in vehicles. In this paper, we will present an overview of Ford Motor Company's current and upcoming research efforts into TE technology. This effort is focused on the use of TE waste heat recovery systems in a vehicle exhaust; and the use of TE HVAC systems in hybrid vehicles. We will discuss the role of the automotive OEM in establishing guidelines and targets for cost, power density

  20. Integrated energy and emission management for heavy-duty diesel engines with waste heat recovery system

    NARCIS (Netherlands)

    Willems, F.P.T.; Kupper, F.; Cloudt, R.P.M.

    2012-01-01

    This study presents an integrated energy and emission management strategy for an Euro-VI diesel engine with Waste Heat Recovery (WHR) system. This Integrated Powertrain Control (IPC) strategy optimizes the CO2-NOx trade-off by minimizing the operational costs associated with fuel and AdBlue

  1. Flux Recovery of a Forward Osmosis Membrane After a Fouling Process

    Science.gov (United States)

    Romero-Mangado, Jaione; Parodi, Jurek; Gamboa-Vazquez, Sonia; Stefanson, Ofir; Diaz-Cartagena, Diana C.; Flynn, Michael

    2016-01-01

    Wastewater treatment through forward osmosis (FO) membranes is a process that has been evaluated in the past years as an innovative technology for the Next Generation Life Support Systems. FO technologies are cost effective, and require very low energy consumption, but are subject to membrane fouling. Membrane fouling occurs when unwanted materials accumulate on the active side of the membrane during the wastewater treatment process, which leads to a decrease in membrane flux rate. The aim of this study is to identify the materials that cause flux rate reduction due to membrane fouling, as well as to evaluate the flux rate recovery after membrane treatment using commercially available antifoulants. Fourier Transform Infrared (FTIR) spectrometry results identified possible compounds that cause membrane fouling and FO testing results demonstrated flux rate recovery after membrane treatment using antifoulants.

  2. Advanced Thermoelectric Materials for Efficient Waste Heat Recovery in Process Industries

    Energy Technology Data Exchange (ETDEWEB)

    Adam Polcyn; Moe Khaleel

    2009-01-06

    The overall objective of the project was to integrate advanced thermoelectric materials into a power generation device that could convert waste heat from an industrial process to electricity with an efficiency approaching 20%. Advanced thermoelectric materials were developed with figure-of-merit ZT of 1.5 at 275 degrees C. These materials were not successfully integrated into a power generation device. However, waste heat recovery was demonstrated from an industrial process (the combustion exhaust gas stream of an oxyfuel-fired flat glass melting furnace) using a commercially available (5% efficiency) thermoelectric generator coupled to a heat pipe. It was concluded that significant improvements both in thermoelectric material figure-of-merit and in cost-effective methods for capturing heat would be required to make thermoelectric waste heat recovery viable for widespread industrial application.

  3. Learning how to recover from job stress: effects of a recovery training program on recovery, recovery-related self-efficacy, and well-being.

    Science.gov (United States)

    Hahn, Verena C; Binnewies, Carmen; Sonnentag, Sabine; Mojza, Eva J

    2011-04-01

    This quasi-experimental study evaluated the effects of a recovery training program on recovery experiences (psychological detachment from work, relaxation, mastery experiences, and control during off-job time), recovery-related self-efficacy, and well-being outcomes. The training comprised two sessions held one week apart. Recovery experiences, recovery-related self-efficacy, and well-being outcomes were measured before the training (T1) and one week (T2) and three weeks (T3) after the training. A training group consisting of 48 individuals and a waitlist control group of 47 individuals were compared (N = 95). Analyses of covariance revealed an increase in recovery experiences at T2 and T3 (for mastery only at T2). Recovery-related self-efficacy and sleep quality increased at T2 and T3, perceived stress and state negative affect decreased at T3. No training effects were found for emotional exhaustion.

  4. Catastrophic Incident Recovery: Long-Term Recovery from an Anthrax Event Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Lesperance, Ann M.

    2008-06-30

    On March 19, 2008, policy makers, emergency managers, and medical and Public Health officials convened in Seattle, Washington, for a workshop on Catastrophic Incident Recovery: Long-Term Recovery from an Anthrax Event. The day-long symposium was aimed at generating a dialogue about restoration and recovery through a discussion of the associated challenges that impact entire communities, including people, infrastructure, and critical systems.

  5. Waste heat recovery from adiabatic diesel engines by exhaust-driven Brayton cycles

    Science.gov (United States)

    Khalifa, H. E.

    1983-01-01

    An evaluation of Bryton Bottoming Systems (BBS) as waste heat recovery devices for future adiabatic diesel engines in heavy duty trucks is presented. Parametric studies were performed to evaluate the influence of external and internal design parameters on BBS performance. Conceptual design and trade-off studies were undertaken to estimate the optimum configuration, size, and cost of major hardware components. The potential annual fuel savings of long-haul trucks equipped with BBS were estimated. The addition of a BBS to a turbocharged, nonaftercooled adiabatic engine would improve fuel economy by as much as 12%. In comparison with an aftercooled, turbocompound engine, the BBS-equipped turbocharged engine would offer a 4.4% fuel economy advantage. If installed in tandem with an aftercooled turbocompound engine, the BBS could effect a 7.2% fuel economy improvement. The cost of a mass-produced 38 Bhp BBS is estimated at about $6460 or 170/Bhp. Technical and economic barriers that hinder the commercial introduction of bottoming systems were identified. Related studies in the area of waste heat recovery from adiabatic diesel engines and NASA-CR-168255 (Steam Rankine) and CR-168256 (Organic Rankine).

  6. Solid waste integrated cost analysis model: 1991 project year report. Part 2

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The purpose of the City of Houston`s 1991 Solid Waste Integrated Cost Analysis Model (SWICAM) project was to continue the development of a computerized cost analysis model. This model is to provide solid waste managers with tool to evaluate the dollar cost of real or hypothetical solid waste management choices. Those choices have become complicated by the implementation of Subtitle D of the Resources Conservation and Recovery Act (RCRA) and the EPA`s Integrated Approach to managing municipal solid waste;. that is, minimize generation, maximize recycling, reduce volume (incinerate), and then bury (landfill) only the remainder. Implementation of an integrated solid waste management system involving all or some of the options of recycling, waste to energy, composting, and landfilling is extremely complicated. Factors such as hauling distances, markets, and prices for recyclable, costs and benefits of transfer stations, and material recovery facilities must all be considered. A jurisdiction must determine the cost impacts of implementing a number of various possibilities for managing, handling, processing, and disposing of waste. SWICAM employs a single Lotus 123 spreadsheet to enable a jurisdiction to predict or assess the costs of its waste management system. It allows the user to select his own process flow for waste material and to manipulate the model to include as few or as many options as he or she chooses. The model will calculate the estimated cost for those choices selected. The user can then change the model to include or exclude waste stream components, until the mix of choices suits the user. Graphs can be produced as a visual communication aid in presenting the results of the cost analysis. SWICAM also allows future cost projections to be made.

  7. Technology strategy for enhanced recovery; Technology Target Areas; TTA3 - enhanced recovery

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The Norwegian Continental Shelf (NCS) is facing new challenges in reserve replacement and improved recovery in order to maintain the overall oil production rate from the area. A new target for an increase in oil reserves of 800 million Sm3 of oil (5 billion barrels) by year 2015 has been set by NPD. This is an ambitious goal considering several of the large fields are on a steep decline, and most of the recent discoveries are relatively small. A significant part of these increased reserves will have to come from fields currently on production, from reservoir areas that have been partly or fully swept, and it is therefore evident that Enhanced Oil Recovery (EOR) methods have to play a key role in achieving this target. EOR methods can be divided into gas based EOR methods and water based EOR methods. Thermal methods are not considered applicable on the NCS due to the relatively light oils present, and the depth of the reservoirs. Gas Based EOR; Water Based EOR; CO{sub 2} injection; Surfactants; Air injection; Polymer; Nitrogen injection; Alkaline; Flue gas injection; Polymer gels; WAG; MEOR; FAWAG. The former OG21 strategy document gave high priority to Water Alternating Gas (WAG) methods and CO{sub 2} injection for enhanced recovery. A lot of research and development and evaluation projects on CO{sub 2} injection were launched and are on-going, most of these are being CO{sub 2} WAG studies. The main challenge now in order to realize CO{sub 2} injection on the NCS is on CO{sub 2} availability and transport. It is also believed that increasing gas prices will limit the availability of hydrocarbon gas for injection purposes in the future. There is, however, a clear need for developing alternative cost efficient EOR methods that can improve the sweep efficiency significantly. Since a majority of the fields on the NCS are being produced under water flooding (or WAG), methods that can improve the water flooding efficiency by chemical additives are of special interest and

  8. Recovery of polyhydroxyalkanoates from municipal secondary wastewater sludge.

    Science.gov (United States)

    Kumar, Manish; Ghosh, Pooja; Khosla, Khushboo; Thakur, Indu Shekhar

    2018-05-01

    In the current study, the feasibility of utilizing municipal secondary wastewater sludge for Polyhydroxyalkanoate (PHA) extraction was improved by optimization of various parameters (temperature, duration and concentration of sludge solids). Optimized process parameters resulted in PHA recovery of 0.605 g, significantly higher than un-optimized conditions. The characterization of PHA was carried out by GC-MS, FT-IR and NMR ( 1 H and 13 C) spectroscopy. The PHA profile was found to be dominated by mcl PHA (58%) along with other diverse PHA. The results of the present study show rich diversity of PHA extracted from a raw material which is readily available at minimal cost. In conclusion, exploring the potential of wastes for production of bioplastics not only reduces the cost of bioplastic production, but also provides a sustainable means for waste management. Copyright © 2018 Elsevier Ltd. All rights reserved.

  9. Picturing recovery: a photovoice exploration of recovery dimensions among people with serious mental illness.

    Science.gov (United States)

    Cabassa, Leopoldo J; Nicasio, Andel; Whitley, Rob

    2013-09-01

    Recovery from mental disorders encompasses multiple interrelated dimensions. This study used photovoice to explore how individuals with serious mental illness and a history of substance abuse and homelessness envisioned their recovery. A dimensional recovery model was applied to examine how the interrelationships between recovery dimensions supported consumers' recovery journeys. Photovoice is a participatory research method that empowers people by giving them cameras to document their experiences and inform social action. Sixteen consumers recruited from two supported housing agencies participated in six weekly sessions to which they brought photographs that they took of persons and events in their lives that reflected recovery and wellness and discussed the meaning of the photographs in individual interviews and group sessions. The authors used pile-sorting, grounded theory, and a deductive template-analytic technique to analyze narrative and visual data. Spirituality, life achievements, and receiving and providing support were the most salient themes that emerged from the analysis and illustrate beneficial interrelationships between recovery dimensions. Participants discussed how they relied on their spirituality to support their sobriety and cope with addictions-aspects of clinical recovery. Educational and vocational achievements represented gains in functioning that contributed to increasing self-esteem and self-agency and reducing self-stigma. Social dimensions of recovery, such as receiving and giving support to loved ones, rippled through consumers' lives reducing isolation and enhancing their self-worth. The findings illustrate the value of participatory methods to understand what recovery signified to people with serious mental illness and how understanding the interrelationships between recovery dimensions can inform recovery-oriented services.

  10. Alliancing process helps BP control Prudhoe Bay costs

    International Nuclear Information System (INIS)

    Darley, J.R.

    1992-01-01

    Production and revenues from America's largest oil field are declining. The cost of operating it is rising. If both trends were to continue unchecked, oil production at Prudhoe Bay on Alaska's North Slope could become uneconomic in the next decade. Simply maintaining operating expenditures at current levels - barring a dramatic, lasting increase in oil prices - would postpone the day of reckoning by only a few years. Despite ongoing investments in tempering the decline - gas and water handling expansions, development drilling, enhanced oil recovery, and well maintenance and repair programs - production will continue to decline. That's why it's imperative we reverse the tide of rising costs. This paper reports that to continue to produce oil at Prudhoe well into the 21st century, we must immediately - and continually - cut costs to reflect declining production and revenues

  11. Improved NGL recovery designs maximize operating flexibility and product recoveries

    International Nuclear Information System (INIS)

    Wilkinson, J.D.; Hudson, H.M.

    1992-01-01

    This paper reports that the historically cyclical nature in the market for ethane and propane has demonstrated the need for flexible natural gas liquids (NGL) recovery plants. NEwly developed and patented processes are now available which can provide ultra-high recovery of ethane (95%+) when demand for ethane is high and provide essentially complete ethane rejection without the normally concomitant reduction in propane recovery. This provides plant operators the flexibility to respond more readily to NGL market conditions, thus maximizing plant operating profits. The new process designs provide this flexibility without increasing utility requirements. In fact, utility consumption is often lower when compared to conventional designs. This same process technology can also be easily retrofit into existing plants with relatively quick payout of the modifications from both recovery and efficiency improvements

  12. SOR 90-190, 22 March 1990, AECB Cost Recovery Fees Regulations

    International Nuclear Information System (INIS)

    1990-01-01

    These Regulations entered into force on 1 April 1990. They were made pursuant to the Atomic Energy Control Regulations and prescribe the legal obligations to pay fees imposed on applicants for and holders of licences from the Atomic Energy Control Board - AECB. The purpose of the Regulations is to shift the cost of government service from the general taxpayer to the users and to those who specifically benefit from the services. (NEA) [fr

  13. Cost recovery in geographic information systems and conflicts with copyright law

    Science.gov (United States)

    Roberts, Jon L.

    1993-10-01

    The ability to recover cost by the sale of geographic information is dependent upon the ownership of the copyright in and to that information. The ownership of the copyright turns upon whether one entity is an employee of the other or whether the copyrightable work falls within certain statutorily defined categories in the copyright law. Absent the specific requirements being fulfilled the ownership of the data may not be exactly as the parties expect.

  14. Algorithms for image recovery calculation in extended single-shot phase-shifting digital holography

    Science.gov (United States)

    Hasegawa, Shin-ya; Hirata, Ryo

    2018-04-01

    The single-shot phase-shifting method of image recovery using an inclined reference wave has the advantages of reducing the effects of vibration, being capable of operating in real time, and affording low-cost sensing. In this method, relatively low reference angles compared with that in the conventional method using phase shift between three or four pixels has been required. We propose an extended single-shot phase-shifting technique which uses the multiple-step phase-shifting algorithm and the corresponding multiple pixels which are the same as that of the period of an interference fringe. We have verified the theory underlying this recovery method by means of Fourier spectral analysis and its effectiveness by evaluating the visibility of the image using a high-resolution pattern. Finally, we have demonstrated high-contrast image recovery experimentally using a resolution chart. This method can be used in a variety of applications such as color holographic interferometry.

  15. An innovative bioelectrochemical-anaerobic digestion-coupled system for in-situ ammonia recovery and biogas enhancement: process performance and microbial ecology

    DEFF Research Database (Denmark)

    Zhang, Yifeng; Angelidaki, Irini

    (SMRC) and a continuous stirred tank reactor (CSTR), to prevent ammonia toxicity during anaerobic digestion by in-situ ammonia recovery and electricity production. In batch experiment, the ammonia concentration in the CSTR decreased from 6 to 0.7 g-N/L with an average recovery rate of 0.18 g-N/L(CSTR...... performance was enhanced. In addition, the coexistence of other cations in CSTR or cathode had no negative effect on the ammonia transportation. In continuous reactor operation, 112% extra biogas production was achieved due to ammonia recovery. High-throughput molecular sequencing analysis showed an impact...... of ammonia recovery on the microbial community composition in the integrated system. Results clearly indicate the great potential of the SMRC-CSTR-coupled system for efficient and cost-effective ammonia recovery, energy production and treatment of ammonia-rich residues....

  16. Reuse of Produced Water from CO2 Enhanced Oil Recovery, Coal-Bed Methane, and Mine Pool Water by Coal-Based Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Knutson, Chad [Univ. of Illinois, Champaign, IL (United States); Dastgheib, Seyed A. [Univ. of Illinois, Champaign, IL (United States); Yang, Yaning [Univ. of Illinois, Champaign, IL (United States); Ashraf, Ali [Univ. of Illinois, Champaign, IL (United States); Duckworth, Cole [Univ. of Illinois, Champaign, IL (United States); Sinata, Priscilla [Univ. of Illinois, Champaign, IL (United States); Sugiyono, Ivan [Univ. of Illinois, Champaign, IL (United States); Shannon, Mark A. [Univ. of Illinois, Champaign, IL (United States); Werth, Charles J. [Univ. of Illinois, Champaign, IL (United States)

    2012-07-01

    Power generation in the Illinois Basin is expected to increase by as much as 30% by the year 2030, and this would increase the cooling water consumption in the region by approximately 40%. This project investigated the potential use of produced water from CO2 enhanced oil recovery (CO2-EOR) operations; coal-bed methane (CBM) recovery; and active and abandoned underground coal mines for power plant cooling in the Illinois Basin. Specific objectives of this project were: (1) to characterize the quantity, quality, and geographic distribution of produced water in the Illinois Basin; (2) to evaluate treatment options so that produced water may be used beneficially at power plants; and (3) to perform a techno-economic analysis of the treatment and transportation of produced water to thermoelectric power plants in the Illinois Basin. Current produced water availability within the basin is not large, but potential flow rates up to 257 million liters per day (68 million gallons per day (MGD)) are possible if CO2-enhanced oil recovery and coal bed methane recovery are implemented on a large scale. Produced water samples taken during the project tend to have dissolved solids concentrations between 10 and 100 g/L, and water from coal beds tends to have lower TDS values than water from oil fields. Current pretreatment and desalination technologies including filtration, adsorption, reverse osmosis (RO), and distillation can be used to treat produced water to a high quality level, with estimated costs ranging from $2.6 to $10.5 per cubic meter ($10 to $40 per 1000 gallons). Because of the distances between produced water sources and power plants, transportation costs tend to be greater than treatment costs. An optimization algorithm was developed to determine the lowest cost pipe network connecting sources and sinks. Total water costs increased with flow rate up to 26 million liters per day (7 MGD), and the range was from $4 to $16 per cubic meter

  17. Business recovery: an assessment framework.

    Science.gov (United States)

    Stevenson, Joanne R; Brown, Charlotte; Seville, Erica; Vargo, John

    2018-07-01

    This paper presents a Business Recovery Assessment Framework (BRAF) to help researchers and practitioners design robust, repeatable, and comparable studies of business recovery in various post-disruption contexts. Studies assessing business recovery without adequately considering the research aims, recovery definitions, and indicators can produce misleading findings. The BRAF is composed of a series of steps that guide the decisions that researchers need to make to ensure: (i) that recovery is indeed being measured; (ii) that the indicators of recovery that are selected align with the objectives of the study and the definition of recovery; and, where necessary, (iii) that appropriate comparative control variables are in place. The paper draws on a large dataset of business surveys collected following the earthquakes in Canterbury, New Zealand, on 4 September 2010 and 22 February 2011 to demonstrate the varied conclusions that different recovery indicators can produce and to justify the need for a systematic approach to business recovery assessments. © 2018 The Author(s). Disasters © Overseas Development Institute, 2018.

  18. Reverse osmosis brine for phosphorus recovery from source separated urine.

    Science.gov (United States)

    Tian, Xiujun; Wang, Guotian; Guan, Detian; Li, Jiuyi; Wang, Aimin; Li, Jin; Yu, Zhe; Chen, Yong; Zhang, Zhongguo

    2016-12-01

    Phosphorus (P) recovery from waste streams has recently been recognized as a key step in the sustainable supply of this indispensable and non-renewable resource. The feasibility of using brine from a reverse osmosis (RO) membrane unit treating cooling water as a precipitant for P recovery from source separated urine was evaluated in the present study. P removal efficiency, process parameters and precipitate properties were investigated in batch and continuous flow experiments. More than 90% of P removal was obtained from both undiluted fresh and hydrolyzed urines by mixing with RO brine (1:1, v/v) at a pH over 9.0. Around 2.58 and 1.24 Kg of precipitates could be recovered from 1 m 3 hydrolyzed and fresh urine, respectively, and the precipitated solids contain 8.1-19.0% of P, 10.3-15.2% of Ca, 3.7-5.0% of Mg and 0.1-3.5% of ammonium nitrogen. Satisfactory P removal performance was also achieved in a continuous flow precipitation reactor with a hydraulic retention time of 3-6 h. RO brine could be considered as urinal and toilet flush water despite of a marginally higher precipitation tendency than tap water. This study provides a widely available, low - cost and efficient precipitant for P recovery in urban areas, which will make P recovery from urine more economically attractive. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Supervisory control of a heavy-duty diesel engine with an electrified waste heat recovery system

    NARCIS (Netherlands)

    Feru, E.; Murgovski, N.; de Jager, A.G.; Willems, F.P.T.

    This paper presents an integrated energy and emission management strategy, called Integrated Powertrain Control (IPC), for an Euro-VI diesel engine with an electrified waste heat recovery system. This strategy optimizes the CO2–NOxCO2–NOx trade-off by minimizing the operational costs associated with

  20. Process development and exergy cost sensitivity analysis of a hybrid molten carbonate fuel cell power plant and carbon dioxide capturing process

    Science.gov (United States)

    Mehrpooya, Mehdi; Ansarinasab, Hojat; Moftakhari Sharifzadeh, Mohammad Mehdi; Rosen, Marc A.

    2017-10-01

    An integrated power plant with a net electrical power output of 3.71 × 105 kW is developed and investigated. The electrical efficiency of the process is found to be 60.1%. The process includes three main sub-systems: molten carbonate fuel cell system, heat recovery section and cryogenic carbon dioxide capturing process. Conventional and advanced exergoeconomic methods are used for analyzing the process. Advanced exergoeconomic analysis is a comprehensive evaluation tool which combines an exergetic approach with economic analysis procedures. With this method, investment and exergy destruction costs of the process components are divided into endogenous/exogenous and avoidable/unavoidable parts. Results of the conventional exergoeconomic analyses demonstrate that the combustion chamber has the largest exergy destruction rate (182 MW) and cost rate (13,100 /h). Also, the total process cost rate can be decreased by reducing the cost rate of the fuel cell and improving the efficiency of the combustion chamber and heat recovery steam generator. Based on the total avoidable endogenous cost rate, the priority for modification is the heat recovery steam generator, a compressor and a turbine of the power plant, in rank order. A sensitivity analysis is done to investigate the exergoeconomic factor parameters through changing the effective parameter variations.

  1. Cost analysis of seawater uranium recovered by a polymeric adsorbent system

    International Nuclear Information System (INIS)

    Schneider, E.; Lindner, H.; Sachde, D.; Flicker, M.

    2014-01-01

    In tandem with its adsorbent development and marine testing efforts, the United States Department of Energy, Office of Nuclear Energy, routinely updates and expands its cost analysis of technologies for extracting uranium from seawater. If informed by repeatable data from field tests, a rigorous cost analysis can convincingly establish seawater uranium as a “backstop” to conventional uranium resources. A backstop provides an essentially unlimited supply of an otherwise exhaustible resource. Its role is to remove the uncertainty around the long-term sustainability of the resource. The cost analysis ultimately aims to demonstrate a uranium production cost that is sustainable for the nuclear power industry, with no insurmountable technical or environmental roadblocks. It is also a tool for guiding further R&D, identifying inputs and performance factors where further development would offer the greatest reduction in costs and/or uncertainties. A life cycle discounted cash flow methodology is used to calculate the uranium production cost and its uncertainty from the costs of fundamental inputs including chemicals and materials, labor, equipment, energy carriers and facilities. The inputs themselves are defined by process flow models of the adsorbent fabrication and grafting, mooring at sea, recovery, and elution and purification steps in the seawater uranium recovery process. Pacific Northwest National Laboratory (PNNL) has carried out marine tests of the Oak Ridge National Laboratory amidoxime grafted polymer adsorbent in natural seawater. Multiple test campaigns demonstrated that after 60 days of immersion the uranium uptake averaged 3090 ± 310 μg U/g of adsorbent. Past ocean experiments on similar material by the Japan Atomic Energy Agency (JAEA) demonstrated that the adsorbent may be used in the sea six times before being replaced, with 5% uptake degradation per reuse. The mooring and recovery system envisioned for the adsorbent is similar to one proposed by

  2. Costs and benefits of biogas recovery from communal anaerobic digesters treating domestic wastewater: Evidence from peri-urban Zambia.

    Science.gov (United States)

    Laramee, Jeannette; Tilmans, Sebastien; Davis, Jennifer

    2018-03-15

    Communal anaerobic digesters (ADs) have been promoted as a waste-to-energy strategy that can provide sanitation and clean energy co-benefits. However, little empirical evidence is available regarding the performance of such systems in field conditions. This study assesses the wastewater treatment efficiency, energy production, greenhouse gas (GHG) emissions, and financial costs and benefits of communal ADs used for domestic wastewater treatment in Zambia. Primary data on the technical performance of 15 ADs were collected over a 6-month period and in-person interviews were conducted with heads of 120 households. Findings from this study suggest that ADs offer comparable wastewater treatment efficiencies and greater GHG emission reduction benefits relative to conventional septic tanks (STs), with the greatest benefits in settings with reliable access to water, use of low efficiency solid fuels and with sufficient demand for biogas in proximity to supply. However, absent a mechanism to monetize additional benefits from biogas recovery, ADs in this context will not be a financially attractive investment relative to STs. Our financial analysis suggests that, under the conditions in this study, a carbon price of US$9 to $28 per tCO 2 e is necessary for positive investment in ADs relative to STs. Findings from this study contribute empirical evidence on ADs as a sanitation and clean energy strategy, identify conditions under which the greatest benefits are likely to accrue and inform international climate efforts on the carbon price required to attract investment in emissions reduction projects such as ADs. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Modeling Reef Fish Biomass, Recovery Potential, and Management Priorities in the Western Indian Ocean.

    Science.gov (United States)

    McClanahan, Timothy R; Maina, Joseph M; Graham, Nicholas A J; Jones, Kendall R

    2016-01-01

    Fish biomass is a primary driver of coral reef ecosystem services and has high sensitivity to human disturbances, particularly fishing. Estimates of fish biomass, their spatial distribution, and recovery potential are important for evaluating reef status and crucial for setting management targets. Here we modeled fish biomass estimates across all reefs of the western Indian Ocean using key variables that predicted the empirical data collected from 337 sites. These variables were used to create biomass and recovery time maps to prioritize spatially explicit conservation actions. The resultant fish biomass map showed high variability ranging from ~15 to 2900 kg/ha, primarily driven by human populations, distance to markets, and fisheries management restrictions. Lastly, we assembled data based on the age of fisheries closures and showed that biomass takes ~ 25 years to recover to typical equilibrium values of ~1200 kg/ha. The recovery times to biomass levels for sustainable fishing yields, maximum diversity, and ecosystem stability or conservation targets once fishing is suspended was modeled to estimate temporal costs of restrictions. The mean time to recovery for the whole region to the conservation target was 8.1(± 3SD) years, while recovery to sustainable fishing thresholds was between 0.5 and 4 years, but with high spatial variation. Recovery prioritization scenario models included one where local governance prioritized recovery of degraded reefs and two that prioritized minimizing recovery time, where countries either operated independently or collaborated. The regional collaboration scenario selected remote areas for conservation with uneven national responsibilities and spatial coverage, which could undermine collaboration. There is the potential to achieve sustainable fisheries within a decade by promoting these pathways according to their social-ecological suitability.

  4. A case-study of landfill minimization and material recovery via waste co-gasification in a new waste management scheme

    Energy Technology Data Exchange (ETDEWEB)

    Tanigaki, Nobuhiro, E-mail: tanigaki.nobuhiro@eng.nssmc.com [NIPPON STEEL & SUMIKIN ENGINEERING CO., LTD., (EUROPEAN OFFICE), Am Seestern 8, 40547 Dusseldorf (Germany); Ishida, Yoshihiro [NIPPON STEEL & SUMIKIN ENGINEERING CO., LTD., 46-59, Nakabaru, Tobata-ku, Kitakyushu, Fukuoka 804-8505 (Japan); Osada, Morihiro [NIPPON STEEL & SUMIKIN ENGINEERING CO., LTD., (Head Office), Osaki Center Building 1-5-1, Osaki, Shinagawa-ku, Tokyo 141-8604 (Japan)

    2015-03-15

    Highlights: • A new waste management scheme and the effects of co-gasification of MSW were assessed. • A co-gasification system was compared with other conventional systems. • The co-gasification system can produce slag and metal with high-quality. • The co-gasification system showed an economic advantage when bottom ash is landfilled. • The sensitive analyses indicate an economic advantage when the landfill cost is high. - Abstract: This study evaluates municipal solid waste co-gasification technology and a new solid waste management scheme, which can minimize final landfill amounts and maximize material recycled from waste. This new scheme is considered for a region where bottom ash and incombustibles are landfilled or not allowed to be recycled due to their toxic heavy metal concentration. Waste is processed with incombustible residues and an incineration bottom ash discharged from existent conventional incinerators, using a gasification and melting technology (the Direct Melting System). The inert materials, contained in municipal solid waste, incombustibles and bottom ash, are recycled as slag and metal in this process as well as energy recovery. Based on this new waste management scheme with a co-gasification system, a case study of municipal solid waste co-gasification was evaluated and compared with other technical solutions, such as conventional incineration, incineration with an ash melting facility under certain boundary conditions. From a technical point of view, co-gasification produced high quality slag with few harmful heavy metals, which was recycled completely without requiring any further post-treatment such as aging. As a consequence, the co-gasification system had an economical advantage over other systems because of its material recovery and minimization of the final landfill amount. Sensitivity analyses of landfill cost, power price and inert materials in waste were also conducted. The higher the landfill costs, the greater the

  5. Water Recovery Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Water Recovery Project (WRP) is advancing environmental control and life support systems water recovery technologies to support human exploration beyond low...

  6. EPA Recovery Mapper

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Recovery Mapper is an Internet interactive mapping application that allows users to discover information about every American Recovery and Reinvestment Act...

  7. Methane recovery from animal manures: A current opportunities casebook

    Energy Technology Data Exchange (ETDEWEB)

    Lusk, P. [Resource Development Associates, Marietta, GA (United States)

    1994-12-01

    One manure management system provides not only pollution prevention but also converts a manure management problem into a new profit center. Economic evaluations and case studies of operating systems indicate that the anaerobic digestion of livestock manures is a commercially-available bioconversion technology with considerable potential for providing profitable co-products including a cost-effective renewable fuel for livestock production operations. This Casebook examines some of the current opportunities for the recovery of methane from the anaerobic digestion of animal manures. The economic evaluations are based on engineering studies of digesters that generate electricity from the recovered methane. Regression models, which can be used to estimate digester cost and internal rate of return, are developed from the evaluations. Finally, anaerobic digestion has considerable potential beyond agribusiness. Examples of digesters currently employed by other industries are provided.

  8. Comparative Effects of Biomass Pre-Treatments for Direct and Indirect Transesterification to Enhance Microalgal Lipid Recovery

    International Nuclear Information System (INIS)

    Ghasemi Naghdi, Forough; Thomas-Hall, Skye R.; Durairatnam, Reuben; Pratt, Steven; Schenk, Peer M.

    2014-01-01

    Microalgal lipid recovery for biodiesel production is currently considered suboptimal, but pre-treatment of algal biomass, the use of solvent mixtures and the positioning of transesterification can lead to increased yields. Here, the effect of various reportedly successful pre-treatments and solvent mixtures were directly compared to each other and combined with direct and indirect transesterification methods using the oleaginous microalga Tetraselmis sp. M8. Microwave and thermal pre-treatments were applied and the total lipid and fatty acid methyl ester (FAME) recoveries were investigated. The application of pre-treatments increased FAME recovery through indirect transesterification when a Soxhlet system was used but they had no significant effect for direct transesterification. Gravimetric analyses of total lipids revealed that lipid recovery was highest when utilizing the chloroform-based Bligh and Dyer extraction method; however, FAME yield was the highest when applying a Soxhlet system utilizing a solvent mixture of hexane–ethanol (3:1). Total lipid recovery did not necessarily correlate with the recovery of FAMEs. The highest FAME recovery was achieved from thermal or microwave pre-treated biomass followed by indirect transesterification through Soxhlet extraction. FAME recovery could be more than doubled (increase of up to 171%) under these conditions. We conclude that a simple thermal pre-treatment (80°C for 10 min) in combination with solvent mixture extraction through indirect transesterification may present a cost-effective and scalable option for large-scale lipid extraction from microalgae.

  9. Comparative effects of biomass pre-treatments for direct and indirect transesterification to enhance microalgal lipid recovery

    Directory of Open Access Journals (Sweden)

    Forough eGhasemi Naghdi

    2014-12-01

    Full Text Available Microalgal lipid recovery for biodiesel production is currently considered suboptimal, but pre-treatment of algal biomass, the use of solvent mixtures and the positioning of transesterification can lead to increased yields. Here, the effect of various reportedly successful pre-treatments and solvent mixtures were directly compared to each other and combined with direct and indirect transesterification methods using the oleaginous microalga Tetraselmis sp. M8. Microwave and thermal pre-treatments were applied and the total lipid and fatty acid methyl ester (FAME recoveries were investigated. The application of pre-treatments increased FAME recovery through indirect transesterification when a Soxhlet system was used but they had no significant effect for direct transesterification. Gravimetric analyses of total lipids revealed that lipid recovery was highest when utilizing the chloroform-based Bligh and Dyer extraction method; however FAME yield was the highest when applying a Soxhlet system utilizing a solvent mixture of hexane-ethanol (3:1. Total lipid recovery did not necessarily correlate with the recovery of FAMEs. The highest FAME recovery was achieved from thermal or microwave pre-treated biomass followed by indirect transesterification through Soxhlet extraction. FAME recovery could be more than doubled (increase of up to 171% under these conditions. We conclude that a simple thermal pre-treatment (80°C for 10 min in combination with solvent mixture extraction through indirect transesterification may present a cost-effective and scalable option for large-scale lipid extraction from microalgae.

  10. Comparative Effects of Biomass Pre-Treatments for Direct and Indirect Transesterification to Enhance Microalgal Lipid Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Ghasemi Naghdi, Forough; Thomas-Hall, Skye R.; Durairatnam, Reuben [Algae Biotechnology Laboratory, School of Agriculture and Food Sciences, The University of Queensland, Brisbane, QLD (Australia); Pratt, Steven [School of Chemical Engineering, The University of Queensland, Brisbane, QLD (Australia); Schenk, Peer M., E-mail: p.schenk@uq.edu.au [Algae Biotechnology Laboratory, School of Agriculture and Food Sciences, The University of Queensland, Brisbane, QLD (Australia)

    2014-12-04

    Microalgal lipid recovery for biodiesel production is currently considered suboptimal, but pre-treatment of algal biomass, the use of solvent mixtures and the positioning of transesterification can lead to increased yields. Here, the effect of various reportedly successful pre-treatments and solvent mixtures were directly compared to each other and combined with direct and indirect transesterification methods using the oleaginous microalga Tetraselmis sp. M8. Microwave and thermal pre-treatments were applied and the total lipid and fatty acid methyl ester (FAME) recoveries were investigated. The application of pre-treatments increased FAME recovery through indirect transesterification when a Soxhlet system was used but they had no significant effect for direct transesterification. Gravimetric analyses of total lipids revealed that lipid recovery was highest when utilizing the chloroform-based Bligh and Dyer extraction method; however, FAME yield was the highest when applying a Soxhlet system utilizing a solvent mixture of hexane–ethanol (3:1). Total lipid recovery did not necessarily correlate with the recovery of FAMEs. The highest FAME recovery was achieved from thermal or microwave pre-treated biomass followed by indirect transesterification through Soxhlet extraction. FAME recovery could be more than doubled (increase of up to 171%) under these conditions. We conclude that a simple thermal pre-treatment (80°C for 10 min) in combination with solvent mixture extraction through indirect transesterification may present a cost-effective and scalable option for large-scale lipid extraction from microalgae.

  11. Investigation and optimization of the depth of flue gas heat recovery in surface heat exchangers

    Science.gov (United States)

    Bespalov, V. V.; Bespalov, V. I.; Melnikov, D. V.

    2017-09-01

    Economic issues associated with designing deep flue gas heat recovery units for natural gas-fired boilers are examined. The governing parameter affecting the performance and cost of surface-type condensing heat recovery heat exchangers is the heat transfer surface area. When firing natural gas, the heat recovery depth depends on the flue gas temperature at the condenser outlet and determines the amount of condensed water vapor. The effect of the outlet flue gas temperature in a heat recovery heat exchanger on the additionally recovered heat power is studied. A correlation has been derived enabling one to determine the best heat recovery depth (or the final cooling temperature) maximizing the anticipated reduced annual profit of a power enterprise from implementation of energy-saving measures. Results of optimization are presented for a surface-type condensing gas-air plate heat recovery heat exchanger for the climatic conditions and the economic situation in Tomsk. The predictions demonstrate that it is economically feasible to design similar heat recovery heat exchangers for a flue gas outlet temperature of 10°C. In this case, the payback period for the investment in the heat recovery heat exchanger will be 1.5 years. The effect of various factors on the optimal outlet flue gas temperature was analyzed. Most climatic, economical, or technological factors have a minor effect on the best outlet temperature, which remains between 5 and 20°C when varying the affecting factors. The derived correlation enables us to preliminary estimate the outlet (final) flue gas temperature that should be used in designing the heat transfer surface of a heat recovery heat exchanger for a gas-fired boiler as applied to the specific climatic conditions.

  12. [Methodologies for estimating the indirect costs of traffic accidents].

    Science.gov (United States)

    Carozzi, Soledad; Elorza, María Eugenia; Moscoso, Nebel Silvana; Ripari, Nadia Vanina

    2017-01-01

    Traffic accidents generate multiple costs to society, including those associated with the loss of productivity. However, there is no consensus about the most appropriate methodology for estimating those costs. The aim of this study was to review methods for estimating indirect costs applied in crash cost studies. A thematic review of the literature was carried out between 1995 and 2012 in PubMed with the terms cost of illness, indirect cost, road traffic injuries, productivity loss. For the assessment of costs we used the the human capital method, on the basis of the wage-income lost during the time of treatment and recovery of patients and caregivers. In the case of premature death or total disability, the discount rate was applied to obtain the present value of lost future earnings. The computed years arose by subtracting to life expectancy at birth the average age of those affected who are not incorporated into the economically active life. The interest in minimizing the problem is reflected in the evolution of the implemented methodologies. We expect that this review is useful to estimate efficiently the real indirect costs of traffic accidents.

  13. Recovery from mental illness

    DEFF Research Database (Denmark)

    Petersen, Kirsten Schultz; Friis, Vivi Soegaard; Haxholm, Birthe Lodahl

    2015-01-01

    Mental health services strive to implement a recovery-oriented approach to rehabilitation. Little is known about service users' perception of the recovery approach. The aim is to explore the service user's perspectives on facilitators and barriers associated with recovery. Twelve residents living...

  14. Analysis of material recovery facilities for use in life-cycle assessment

    OpenAIRE

    Pressley, Phillip N.; Levis, James W.; Damgaard, Anders; Barlaz, Morton A.; DeCarolis, Joseph F.

    2015-01-01

    Insights derived from life-cycle assessment of solid waste management strategies depend critically on assumptions, data, and modeling at the unit process level. Based on new primary data, a process model was developed to estimate the cost and energy use associated with material recovery facilities (MRFs), which are responsible for sorting recyclables into saleable streams and as such represent a key piece of recycling infrastructure. The model includes four modules, each with a different proc...

  15. Recent work at MIT on uranium recovery from seawater

    International Nuclear Information System (INIS)

    Driscoll, M.J.

    1984-01-01

    Recent work at MIT has confirmed the superiority of fiber-form ion exchange media for uranium recovery from seawater, subject to demonstration of the ability to control fouling by suspended particulate matter. Calculations and laboratory experiments indicate loading rates of several hundred ppm U/day: an order of magnitude faster than for bead-type sorbers in fixed or fluidized beds. A high performance, modular, sorber cartridge/seawater contactor system capable of a lifetime-levelized cost of product in the range 100-150 $/1b U 3 O 8 has been designed. (author)

  16. Comparative evaluation of three alternative power cycles for waste heat recovery from the exhaust of adiabatic diesel engines

    Science.gov (United States)

    Bailey, M. M.

    1985-01-01

    Three alternative power cycles were compared in application as an exhaust-gas heat-recovery system for use with advanced adiabatic diesel engines. The power cycle alternatives considered were steam Rankine, organic Rankine with RC-1 as the working fluid, and variations of an air Brayton cycle. The comparison was made in terms of fuel economy and economic payback potential for heavy-duty trucks operating in line-haul service. The results indicate that, in terms of engine rated specific fuel consumption, a diesel/alternative-power-cycle engine offers a significant improvement over the turbocompound diesel used as the baseline for comparison. The maximum imporvement resulted from the use of a Rankine cycle heat-recovery system in series with turbocompounding. The air Brayton cycle alternatives studied, which included both simple-cycle and compression-intercooled configurations, were less effective and provided about half the fuel consumption improvement of the Rankine cycle alternatives under the same conditions. Capital and maintenance cost estimates were also developed for each of the heat-recovery power cycle systems. These costs were integrated with the fuel savings to identify the time required for net annual savings to pay back the initial capital investment. The sensitivity of capital payback time to arbitrary increases in fuel price, not accompanied by corresponding hardware cost inflation, was also examined. The results indicate that a fuel price increase is required for the alternative power cycles to pay back capital within an acceptable time period.

  17. Sustainable Cost Models for mHealth at Scale: Modeling Program Data from m4RH Tanzania.

    Directory of Open Access Journals (Sweden)

    Emily R Mangone

    Full Text Available There is increasing evidence that mobile phone health interventions ("mHealth" can improve health behaviors and outcomes and are critically important in low-resource, low-access settings. However, the majority of mHealth programs in developing countries fail to reach scale. One reason may be the challenge of developing financially sustainable programs. The goal of this paper is to explore strategies for mHealth program sustainability and develop cost-recovery models for program implementers using 2014 operational program data from Mobile for Reproductive Health (m4RH, a national text-message (SMS based health communication service in Tanzania.We delineated 2014 m4RH program costs and considered three strategies for cost-recovery for the m4RH program: user pay-for-service, SMS cost reduction, and strategic partnerships. These inputs were used to develop four different cost-recovery scenarios. The four scenarios leveraged strategic partnerships to reduce per-SMS program costs and create per-SMS program revenue and varied the structure for user financial contribution. Finally, we conducted break-even and uncertainty analyses to evaluate the costs and revenues of these models at the 2014 user volume (125,320 and at any possible break-even volume.In three of four scenarios, costs exceeded revenue by $94,596, $34,443, and $84,571 at the 2014 user volume. However, these costs represented large reductions (54%, 83%, and 58%, respectively from the 2014 program cost of $203,475. Scenario four, in which the lowest per-SMS rate ($0.01 per SMS was negotiated and users paid for all m4RH SMS sent or received, achieved a $5,660 profit at the 2014 user volume. A Monte Carlo uncertainty analysis demonstrated that break-even points were driven by user volume rather than variations in program costs.These results reveal that breaking even was only probable when all SMS costs were transferred to users and the lowest per-SMS cost was negotiated with telecom partners

  18. Sustainable Cost Models for mHealth at Scale: Modeling Program Data from m4RH Tanzania.

    Science.gov (United States)

    Mangone, Emily R; Agarwal, Smisha; L'Engle, Kelly; Lasway, Christine; Zan, Trinity; van Beijma, Hajo; Orkis, Jennifer; Karam, Robert

    2016-01-01

    There is increasing evidence that mobile phone health interventions ("mHealth") can improve health behaviors and outcomes and are critically important in low-resource, low-access settings. However, the majority of mHealth programs in developing countries fail to reach scale. One reason may be the challenge of developing financially sustainable programs. The goal of this paper is to explore strategies for mHealth program sustainability and develop cost-recovery models for program implementers using 2014 operational program data from Mobile for Reproductive Health (m4RH), a national text-message (SMS) based health communication service in Tanzania. We delineated 2014 m4RH program costs and considered three strategies for cost-recovery for the m4RH program: user pay-for-service, SMS cost reduction, and strategic partnerships. These inputs were used to develop four different cost-recovery scenarios. The four scenarios leveraged strategic partnerships to reduce per-SMS program costs and create per-SMS program revenue and varied the structure for user financial contribution. Finally, we conducted break-even and uncertainty analyses to evaluate the costs and revenues of these models at the 2014 user volume (125,320) and at any possible break-even volume. In three of four scenarios, costs exceeded revenue by $94,596, $34,443, and $84,571 at the 2014 user volume. However, these costs represented large reductions (54%, 83%, and 58%, respectively) from the 2014 program cost of $203,475. Scenario four, in which the lowest per-SMS rate ($0.01 per SMS) was negotiated and users paid for all m4RH SMS sent or received, achieved a $5,660 profit at the 2014 user volume. A Monte Carlo uncertainty analysis demonstrated that break-even points were driven by user volume rather than variations in program costs. These results reveal that breaking even was only probable when all SMS costs were transferred to users and the lowest per-SMS cost was negotiated with telecom partners. While this

  19. Energetic costs of performance in trained and untrained Anolis carolinensis lizards.

    Science.gov (United States)

    Lailvaux, Simon P; Wang, Andrew Z; Husak, Jerry F

    2018-03-12

    The energetic costs of performance constitute a non-trivial component of animals' daily energetic budgets. However, we currently lack an understanding of how those costs are partitioned among the various stages of performance development, maintenance, and production. We manipulated individual investment in performance by training Anolis carolinensis lizards for endurance or sprinting ability. We then measured energetic expenditure both at rest and immediately following exercise to test whether such training alters the maintenance and production costs of performance. Trained lizards had lower resting metabolic rates than controls, suggestive of a maintenance saving associated with enhanced performance as opposed to a cost. Production costs also differed, with sprint-trained lizards incurring the largest energetic performance cost and experiencing the longest recovery times compared to endurance trained and control animals. Although performance training modifies metabolism, production costs are probably the key drivers of trade-offs between performance and other life-history traits in this species. © 2018. Published by The Company of Biologists Ltd.

  20. Recovery and money management.

    Science.gov (United States)

    Rowe, Michael; Serowik, Kristin L; Ablondi, Karen; Wilber, Charles; Rosen, Marc I

    2013-06-01

    Social recovery and external money management are important approaches in contemporary mental health care, but little research has been done on the relationship between the two or on application of recovery principles to money management for people at risk of being assigned a representative payee or conservator. Out of 49 total qualitative interviews, 25 transcripts with persons receiving Social Security insurance or Social Security disability insurance who were at risk of being assigned a money manager were analyzed to assess the presence of recognized recovery themes. The recovery principles of self-direction and responsibility were strong themes in participant comments related to money management. Money management interventions should incorporate peoples' recovery-related motivations to acquire financial management skills as a means to direct and assume responsibility for one's finances. Staff involved in money management should receive training to support client's recovery-related goals. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  1. Model of Management (Mo.Ma) for the patient with schizophrenia: crisis control, maintenance, relapse prevention, and recovery with long-acting injectable antipsychotics (LAIs).

    Science.gov (United States)

    Brugnoli, Roberto; Rapinesi, Chiara; Kotzalidis, Georgios D; Marcellusi, Andrea; Mennini, Francesco S; De Filippis, Sergio; Carrus, Dario; Ballerini, Andrea; Francomano, Antonio; Ducci, Giuseppe; Del Casale, Antonio; Girardi, Paolo

    2016-01-01

    Schizophrenia is a severe mental disease that affects approximately 1% of the population with a relevant chronic impact on social and occupational functioning and daily activities. People with schizophrenia are 2-2.5 times more likely to die early than the general population. Non-adherence to antipsychotic medications, both in chronic and first episode schizophrenia, is one of the most important risk factors for relapse and hospitalization, that consequently contributes to increased costs due to psychiatric hospitalization. Atypical long-acting injectable (LAI) antipsychotics can improve treatment adherence and decrease re-hospitalization rates in patients with schizophrenia since its onset. The primary goals in the management of schizophrenia are directed not only at symptom reduction in the short and long term, but also at maintaining physical and mental functioning, improving quality of life, and promoting patient recovery. To propose a scientific evidence-based integrated model that provides an algorithm for recovery of patients with schizophrenia and to investigate the effectiveness and safety of antipsychotics LAI in the treatment, maintenance, relapse prevention, and recovery of schizophrenia. After an accurate literature review we identified, collected and analyzed the crucial points in taking care schizophrenia patients, through which we defined the steps described in the model of management and the choice of the better treatment option. Results. In the management model we propose, the choice of a second generation long acting antipsychotic, could allow from the earliest stages of illness better patient management, especially for young individuals with schizophrenia onset, a better recovery and significant reductions of relapse and health care costs. LAI formulations of antipsychotics are valuable, because they help patients to remain adherent to their medication through regular contact with healthcare professionals and to prevent covert non-adherence. The

  2. Saving Blood and Reducing Costs: Updating Blood Transfusion Practice in Lower Limb Arthroplasty

    LENUS (Irish Health Repository)

    Fenelon, C

    2018-04-01

    Our aim was to quantify blood transfusion rates in lower limb arthroplasty following the introduction of a multimodal enhanced recovery programme (ERP). We then sought to update the maximum surgical blood ordering schedule (MSBOS) and calculate cost savings achieved.

  3. Tenth oil recovery conference

    International Nuclear Information System (INIS)

    Sleeper, R.

    1993-01-01

    The Tertiary Oil Recovery Project is sponsored by the State of Kansas to introduce Kansas producers to the economic potential of enhanced recovery methods for Kansas fields. Specific objectives include estimation of the state-wide tertiary oil resource, identification and evaluation of the most applicable processes, dissemination of technical information to producers, occasional collaboration on recovery projects, laboratory studies on Kansas applicable processes, and training of students and operators in tertiary oil recovery methods. Papers have been processed separately for inclusion on the data base

  4. Citizenship and recovery: two intertwined concepts for civic-recovery.

    Science.gov (United States)

    Pelletier, Jean-François; Corbière, Marc; Lecomte, Tania; Briand, Catherine; Corrigan, Patrick; Davidson, Larry; Rowe, Michael

    2015-03-04

    Validation of the psychometric properties of a new measure of citizenship was required for a research project in the province of Quebec, Canada. This study was meant to study the interplay between recovery- and citizenship-oriented supportive employment. As recovery and citizenship were expected to be two related concepts, convergent validity between the Citizenship Measure (CM) and the Recovery Assessment Scale (RAS) was tested. Study objectives were to: 1) conduct exploratory factor analyses on the CM and confirmatory factor analysis on the RAS tools (construct validity), 2) calculate Cronbach's alphas for each dimension emerging from objective 1 (reliability), and 3) calculate correlations between all dimensions from both tools (convergent validity). Data were collected from 174 individuals with serious mental illness, working in social firms. Serious mental illnesses include major depression, schizophrenia, bipolar disorder, obsessive compulsive disorder, panic disorder, post traumatic stress disorder and borderline personality disorder. Five factors emerged from the exploratory factor analysis of the CM, with good reliability. Confirmatory factor analyses showed that the short and the long versions of the RAS present satisfactory results. Finally, the correlation matrix indicated that all dimensions from both tools are significantly correlated, thus confirming their convergent validity. This study confirms the validity and reliability of two tools, CM and RAS. These tools can be used in combination to assess citizenship and recovery, both of which may be combined in the new concept of civic-recovery.

  5. An exploratory study on seawater-catalysed urine phosphorus recovery (SUPR).

    Science.gov (United States)

    Dai, Ji; Tang, Wen-Tao; Zheng, Yi-Se; Mackey, Hamish R; Chui, Ho Kwong; van Loosdrecht, Mark C M; Chen, Guang-Hao

    2014-12-01

    Phosphorus (P) is a crucial and non-renewable resource, while it is excessively discharged via sewage, significant amounts originating from human urine. Recovery of P from source-separated urine presents an opportunity not only to recover this precious resource but also to improve downstream sewage treatment works. This paper proposes a simple and economic method to recover urine derived P by using seawater as a low-cost precipitant to form struvite, as Hong Kong has practised seawater toilet flushing as an alternative water resource since 1958. Chemical reactions, process conditions and precipitate composition for P precipitation in urine have been investigated to develop this new urine P recovery approach. This study concluded that ureolysis extent in a urine-seawater mixture determines the reaction pH that in turn influences the P recovery efficiency significantly; 98% of urine P can precipitate with seawater within 10 min when 40-75% of the urea in urine is ureolysed; the urine to seawater ratio alters the composition of the precipitates. The P content in the precipitates was found to be more than 9% when the urine fraction was 40% or higher. Magnesium ammonium phosphate (MAP) was confirmed to be the predominant component of the precipitates. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Anteseden Customer Loyalty Pada Low Cost Carrier Airline

    OpenAIRE

    Harlan, Marcella

    2015-01-01

    The background of this research was Customer loyalty as a competitive advantage in service industry.The design of this research applies a survey toward unit of analysis on Low Cost Carrier Airline to interview the passanger for testing hypothesis. Meanwhile the required data consist of five variables; Recovery Satisfaction, Corporate Social Responsibility, Customer Trust, Customer Loyalty. The aggregate numbers of customer being respondent of the study are 200. Data analysis us...

  7. Ablation - breakthrough technology to reduce uranium mining cost and increase resources

    International Nuclear Information System (INIS)

    Scriven, D.

    2014-01-01

    Ablation Technologies, LLC has developed and patented a revolutionary mining technology termed “ablation”. Ablation is a process using only mechanical forces to upgrade sandstone uranium ores. Uranium bearing sandstone orebodies are formed from a uranium enriched solution flowing through an aquifer until it reached some type of a “red/ox” zone forcing the uranium and other heavy metals to come out of solution. The precipitate forms a thin coating on the sand grains and fills the interstitial space between the sand grains but does no penetrate the sand grains. The ablation process knocks the precipitate off the sand grains using the forces of abrasion, elastic compression and rebounding, much like a mud coated tennis ball will sheds the mud when bounced off the ground, and to some extent, sonic waves. This produces a product which collectively is exactly the same as the ore going in but with all the individual components separated. This allows for disgressionary separation, the most important of which is screening. The uranium and heavy metals report to the finer fractions of the material, typically less than 250 mesh. The larger fractions contain less than five percent of the uranium but 90 to 95 percent of the mass. The advantages of making an enriched ore are numerous: • Reduce haulage costs from 90 to 95 percent. • Reduce milling costs by reducing material handling costs, acid consumption and tailings disposal costs. • In addition to reducing overall mining and milling costs, the overall recovery of the recourse is increased because the ablation process is so inexpensive, if the material has to be mined it will be ablated and screened. This basically means ore control is significantly reduced, cutoff grade goes to practically zero and overall resource recovery is significantly increased. • Environmentally, the two major advantages are reduced tailings requirements at the mill site and cleaner waste dumps at the mine site. This paper will show

  8. Solvent extraction and its practical application for the recovery of copper and uranium

    International Nuclear Information System (INIS)

    Reuter, J.

    1975-01-01

    In recent years solvent extraction has been developed to a stage that allows practical application first for the recovery of uranium and later also for winning copper from low-grade acid-soluble ores. By now it has been realized in several plants with great technical and ecomomic success. Solvent extraction includes the following essential operations: leaching, solvent extraction, back extraction of the organically bonded valuable mineral to an acid, aqueous solution and finally separation of the valuable metal from the final acid by precipitation or electrolytic procedures. Upon assessing the cost of the solvent extraction process for the recovery of copper it turns out that from an economic point of view it is significantly superior to the conventional cementation process. (orig.) [de

  9. Wastewater Treatment Energy Recovery Potential For Adaptation To Global Change: An Integrated Assessment

    Science.gov (United States)

    Breach, Patrick A.; Simonovic, Slobodan P.

    2018-04-01

    Approximately 20% of wastewaters globally do not receive treatment, whereas wastewater discharges are projected to increase, thereby leading to excessive water quality degradation of surface waters on a global scale. Increased treatment could help alleviate water quality issues by constructing more treatment plants; however, in many areas there exist economic constraints. Energy recovery methods including the utilization of biogas and incineration of biosolids generated during the treatment process may help to alleviate treatment costs. This study explores the potential for investments in energy recovery from wastewater to increase treatment levels and thus improve surface water quality. This was done by examining the relationships between nutrient over-enrichment, wastewater treatment, and energy recovery at a global scale using system dynamics simulation as part of the ANEMI integrated assessment model. The results show that a significant amount of energy can be recovered from wastewater, which helps to alleviate some of the costs of treatment. It was found that wastewater treatment levels could be increased by 34%, helping to offset the higher nutrient loading from a growing population with access to improved sanitation. The production of renewable natural gas from biogas was found to have the potential to prolong the depletion of natural gas resources used to produce electricity and heat. It is recommended that agricultural nutrient discharges be better managed to help reduce nutrient over-enrichment on global scale. To increase the utility of the simulation, a finer spatial scale should be used to consider regional treatment, economic, and water quality characteristics.

  10. Enhanced recovery pathways optimize health outcomes and resource utilization: A meta-analysis of randomized controlled trials in colorectal surgery

    DEFF Research Database (Denmark)

    Adamina, Michel; Kehlet, Henrik; Tomlinson, George A

    2011-01-01

    in costs that threatens the stability of health care systems. Enhanced recovery pathways (ERP) have been proposed as a means to reduce morbidity and improve effectiveness of care. We have reviewed the evidence supporting the implementation of ERP in clinical practice. Methods Medline, Embase...... of health care processes. Thus, while accelerating recovery and safely reducing hospital stay, ERPs optimize utilization of health care resources. ERPs can and should be routinely used in care after colorectal and other major gastrointestinal procedures....

  11. Recovery and reuse of sludge from active and passive treatment of mine drainage-impacted waters: a review.

    Science.gov (United States)

    Rakotonimaro, Tsiverihasina V; Neculita, Carmen Mihaela; Bussière, Bruno; Benzaazoua, Mostafa; Zagury, Gérald J

    2017-01-01

    The treatment of mine drainage-impacted waters generates considerable amounts of sludge, which raises several concerns, such as storage and disposal, stability, and potential social and environmental impacts. To alleviate the storage and management costs, as well as to give the mine sludge a second life, recovery and reuse have recently become interesting options. In this review, different recovery and reuse options of sludge originating from active and passive treatment of mine drainage are identified and thoroughly discussed, based on available laboratory and field studies. The most valuable products presently recovered from the mine sludge are the iron oxy-hydroxides (ochre). Other by-products include metals, elemental sulfur, and calcium carbonate. Mine sludge reuse includes the removal of contaminants, such as As, P, dye, and rare earth elements. Mine sludge can also be reused as stabilizer for contaminated soil, as fertilizer in agriculture/horticulture, as substitute material in construction, as cover over tailings for acid mine drainage prevention and control, as material to sequester carbon dioxide, and in cement and pigment industries. The review also stresses out some of the current challenges and research needs. Finally, in order to move forward, studies are needed to better estimate the contribution of sludge recovery/reuse to the overall costs of mine water treatment.

  12. The Recovery of Zinc Heavy Metal from Industrial Liquid Waste

    International Nuclear Information System (INIS)

    Panggabean, Sahat M.

    2000-01-01

    It had been studied the recovery of zinc heavy metal from liquid waste of electroplating industry located at East Jakarta. The aim of this study was to minimize the waste arisen from industrial activities by taking out zinc metal in order to reused on-site. The method of recovery was two steps precipitation using NaOH reagent and pH variation. The first step of precipitation at pH optimum around 6 yielded iron metal. The second step at pH optimum around 10 yielded zinc metal. The zinc metal was taken out assessed to the possibility of reused at that fabric. By applying its, it will yield the volume reduction of sludge waste about 36.1% or 53.2% of zinc metal containing in the waste. It means the cost of waste treatment will be lower. Beside its, the effluent arisen from the method had fulfill the maximum limit and it allowed to release to the environment. (author)

  13. Intensification of steam explosion and structural intricacies impacting sugar recovery.

    Science.gov (United States)

    Gaur, Ruchi; Semwal, Surbhi; Raj, Tirath; Yadav Lamba, Bhawna; Ramu, E; Gupta, Ravi P; Kumar, Ravindra; Puri, Suresh K

    2017-10-01

    Dilute acid (DA) pretreatment at pilot level failed for cotton stalk (CS) due to the technical issues posed by its inherent nature. Reasonable glucan conversion has been reported via two-stage pretreatment but adds on to the process cost. Proposed herewith is a single-stage steam explosion (SE) process preceded by water extraction resulting in high sugar recovery from CS. Raising the extraction temperature to 80°C increased the glucan conversion from 37.9 to 52.4%. Further improvement up to 68.4% was achieved when DA was incorporated during the room temperature extraction. LC-MS revealed the formation of xylo-oligomers limiting the glucan conversion in proportion to the length of xylo-oligomers. Varying extraction conditions induced structural alterations in biomass after SE evident by compositional analysis, Infrared Spectroscopy, X-Ray Diffraction and Scanning Electron Microscopy. Overall glucose recovery, i.e. 75.8-76.7% with and without DA extraction respectively was achieved. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Key Determinant Derivations for Information Technology Disaster Recovery Site Selection by the Multi-Criterion Decision Making Method

    Directory of Open Access Journals (Sweden)

    Chia-Lee Yang

    2015-05-01

    Full Text Available Disaster recovery sites are an important mechanism in continuous IT system operations. Such mechanisms can sustain IT availability and reduce business losses during natural or human-made disasters. Concerning the cost and risk aspects, the IT disaster-recovery site selection problems are multi-criterion decision making (MCDM problems in nature. For such problems, the decision aspects include the availability of the service, recovery time requirements, service performance, and more. The importance and complexities of IT disaster recovery sites increases with advances in IT and the categories of possible disasters. The modern IT disaster recovery site selection process requires further investigation. However, very few researchers tried to study related issues during past years based on the authors’ extremely limited knowledge. Thus, this paper aims to derive the aspects and criteria for evaluating and selecting a modern IT disaster recovery site. A hybrid MCDM framework consisting of the Decision Making Trial and Evaluation Laboratory (DEMATEL and the Analytic Network Process (ANP will be proposed to construct the complex influence relations between aspects as well as criteria and further, derive weight associated with each aspect and criteria. The criteria with higher weight can be used for evaluating and selecting the most suitable IT disaster recovery sites. In the future, the proposed analytic framework can be used for evaluating and selecting a disaster recovery site for data centers by public institutes or private firms.

  15. Biotechnological recovery of heavy metals from secondary sources-An overview

    International Nuclear Information System (INIS)

    Hoque, Md E.; Philip, Obbard J.

    2011-01-01

    The demand for heavy metals is ever increasing with the advance of the industrialized world, whereas worldwide reserves of high-grade ores are diminishing. However, there exist large stockpiles of low and lean grade ores that are yet to be exploited. In addition, heavy metals that are present in a spectrum of waste streams including mine drainage, industrial effluents, river sediments, electronic scraps and ashes are also available for recovery and utilization. Heavy metal recovery from low and lean grade ores using conventional techniques such as pyrometallurgy, etc. chemical metallurgy encompass several inherent constraints like, high energy and capital inputs, and high risk of secondary environmental pollution. As environmental regulations become ever more stringent, particularly regarding the disposal of toxic wastes, the costs for ensuring environmental protection will continue to rise. Therefore, there is a need to utilize more efficient technologies to recover heavy metals from secondary sources in order to minimize capital outlay, environmental impact and to respond to increased demand. Biohydrometallurgy, which exploits microbiological processes to recover heavy metal ions, is regarded as one of the most promising and revolutionary biotechnologies. The products of such processes are deposited in aqueous solution thereby rendering them to be more amenable to containment, treatment and recovery. On top of this, biohydrometallurgy can be conducted under mild conditions, usually without the use of any toxic chemicals. Consequently, the application of biohydrometallurgy in recovery of heavy metals from lean grade ores, and wastes, has made it an eco-friendly biotechnology for enhanced heavy metal production.

  16. Biotechnological recovery of heavy metals from secondary sources-An overview

    Energy Technology Data Exchange (ETDEWEB)

    Hoque, Md E., E-mail: enamul.hoque@nottingham.edu.my [Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham Malaysia Campus, Jalan Broga, 43500 Semenyih, Selangor Darul Ehsan (Malaysia); Philip, Obbard J., E-mail: esejpo@nus.edu.sg [Division of Environmental Science and Engineering, National University of Singapore, 119260 (Singapore)

    2011-03-12

    The demand for heavy metals is ever increasing with the advance of the industrialized world, whereas worldwide reserves of high-grade ores are diminishing. However, there exist large stockpiles of low and lean grade ores that are yet to be exploited. In addition, heavy metals that are present in a spectrum of waste streams including mine drainage, industrial effluents, river sediments, electronic scraps and ashes are also available for recovery and utilization. Heavy metal recovery from low and lean grade ores using conventional techniques such as pyrometallurgy, etc. chemical metallurgy encompass several inherent constraints like, high energy and capital inputs, and high risk of secondary environmental pollution. As environmental regulations become ever more stringent, particularly regarding the disposal of toxic wastes, the costs for ensuring environmental protection will continue to rise. Therefore, there is a need to utilize more efficient technologies to recover heavy metals from secondary sources in order to minimize capital outlay, environmental impact and to respond to increased demand. Biohydrometallurgy, which exploits microbiological processes to recover heavy metal ions, is regarded as one of the most promising and revolutionary biotechnologies. The products of such processes are deposited in aqueous solution thereby rendering them to be more amenable to containment, treatment and recovery. On top of this, biohydrometallurgy can be conducted under mild conditions, usually without the use of any toxic chemicals. Consequently, the application of biohydrometallurgy in recovery of heavy metals from lean grade ores, and wastes, has made it an eco-friendly biotechnology for enhanced heavy metal production.

  17. Hydrometallurgical Recovery of Metal Values From Spent Dry Battery Cells

    International Nuclear Information System (INIS)

    Rabah, M.A.; Barakat, M.A.; Mahrous, Y.Sh.

    1999-01-01

    This study focuses on the recovery of metal values from spent dry battery cells (DBC) applying a hydro-pyrometallurgical method. A process flow sheet was followed up starting with cutting the DBC with toothed cutter disc followed by water soaking and rinsing. Water soluble ingredients were filtered. Solid residue was assorted with the help of magnetic separation and water flotation.The method utilizes hydrogen peroxide to enhance dissolution of these metals in acidic or alkaline leachants. Parameters affecting the recovery efficiency such as stoichiometric ratio, solid: liquid ratio, temperature, time and ph of the system were investigated. In this concern, experiments were executed with a battery sample weighing up to 15 kg. Atomic absorption analysis showed that the input DBC contain appreciable amounts of metal zinc, zinc chloride and manganese that are recoverable.Results obtained revealed that metallic parts, carbon rods and paper were safely separated for recycling. From the water-soluble salts, pure NH 4 CI, MnO 2 and ZnCI 2 salts are obtained meeting the standard specifications. Temperature up to 55 degree enhances the recovery process. Under the optimum conditions, maximum recovery efficiency obtained amounts to 93% for Mn, and 99.5% for Zn and NH 4 CI. A model for explaining the obtained results was also given. Dissolution of metals concerned increases in the order nitric> hydrochloric acid. Results were explained in the premise of the kinetic and thermodynamic properties of the reactions involved. Cost estimate of the products shows that the prices of the products are competitive to those of the market prices

  18. ORC waste heat recovery in European energy intensive industries: Energy and GHG savings

    International Nuclear Information System (INIS)

    Campana, F.; Bianchi, M.; Branchini, L.; De Pascale, A.; Peretto, A.; Baresi, M.; Fermi, A.; Rossetti, N.; Vescovo, R.

    2013-01-01

    Highlights: • A methodology to estimate ORC industrial heat recovery potential is defined. • Heat recovery applications for different industrial processes are shown. • Cement, steel, glass and oil and gas applications are considered in EU27. • Savings in electricity costs and greenhouse gases are quantified. - Abstract: Organic Rankine Cycle (ORC) is a technology with important opportunities in heat recovery from energy intensive industrial processes. This paper represents the first comprehensive estimate of ORC units that can be installed in cement, steel, glass and oil and gas industries in the 27 countries of the European Union based on an accurate methodology related to real plants in operation or under construction. An evaluation of energy savings, depending on the number of operating hours per year and of the consequent decrease in CO 2 emission and electricity expenditure, is also provided. The study, carried out in the framework of an European research project on heat recovery in energy intensive industries, found that, in the most convenient considered scenario, up to about 20,000 GW h of thermal energy per year can be recovered and 7.6 M ton of CO 2 can be saved by the application of ORC technology to the investigated and most promising industrial sectors

  19. Enhanced Recovery Implementation in Major Gynecologic Surgeries: Effect of Care Standardization.

    Science.gov (United States)

    Modesitt, Susan C; Sarosiek, Bethany M; Trowbridge, Elisa R; Redick, Dana L; Shah, Puja M; Thiele, Robert H; Tiouririne, Mohamed; Hedrick, Traci L

    2016-09-01

    To examine implementing an enhanced recovery after surgery (ERAS) protocol for women undergoing major gynecologic surgery at an academic institution and compare surgical outcomes before and after implementation. Two ERAS protocols were developed: a full pathway using regional anesthesia for open procedures and a light pathway without regional anesthesia for vaginal and minimally invasive procedures. Enhanced recovery after surgery pathways included extensive preoperative counseling, carbohydrate loading and oral fluids before surgery, multimodal analgesia with avoidance of intravenous opioids, intraoperative goal-directed fluid resuscitation, and immediate postoperative feeding and ambulation. A before-and-after study design was used to compare clinical outcomes, costs, and patient satisfaction. Complications and risk-adjusted length of stay were drawn from the American College of Surgeons' National Surgical Quality Improvement Program database. On the ERAS full protocol, 136 patients were compared with 211 historical controls and the median length of stay was reduced (2.0 compared with 3.0 days; P=.007) despite an increase in National Surgical Quality Improvement Program-predicted length of stay (2.5 compared with 2.0 days; P=.009). Reductions were seen in median intraoperative morphine equivalents (0.3 compared with 12.7 mg; Pcontrols and demonstrated decreased intraoperative and postoperative morphine equivalents (0.0 compared with 13.0 mg; Pcontrol, nurses keeping patients informed, and staff teamwork; 30-day total hospital costs were significantly decreased in both ERAS groups. Implementation of ERAS protocols in gynecologic surgery was associated with a substantial decrease in intravenous fluids and morphine administration coupled with reduction in length of stay for open procedures combined with improved patient satisfaction and decreased hospital costs.

  20. Carbon source recovery from excess sludge by mechanical disintegration for biological denitrification.

    Science.gov (United States)

    Zubrowska-Sudol, M

    2018-04-01

    The goal of the study was to evaluate the possibility of carbon source recovery from excess sludge by mechanical disintegration for biological denitrification. The total efficiency of denitrification, unit demand for organic compounds for denitrification, unit volume of disintegrated sludge and unit cost of nitrogen removal as a function of energy density used for excess sludge disintegration (70, 140 and 210 kJ/L) were analyzed. In the study a full-scale disc disintegrator was used (motor power: 30 kWh, motor speed: 2,950 rpm). It was shown that the amounts of organic compounds released from the activated sludge flocs at all tested levels of energy density are high enough to be used to intensify the removal of nitrogen compounds from wastewater. It was also documented that the energy density provided during process of disintegration was an important factor determining the characteristics of organic compounds obtained under the disintegration for their use in order to intensify the process of denitrification. The highest value of total efficiency of denitrification (50.5 ± 3.1 mg N/L) was obtained for carbon source recovery from excess sludge at 70 kJ/L, but the lowest unit cost of nitrogen removal occurred for 140 kJ/L (0.0019 ± 0.0011 EUR/g N).

  1. Continuous enzymatic hydrolysis of lignocellulosic biomass with simultaneous detoxification and enzyme recovery.

    Science.gov (United States)

    Gurram, Raghu N; Menkhaus, Todd J

    2014-07-01

    Recovering hydrolysis enzymes and/or alternative enzyme addition strategies are two potential mechanisms for reducing the cost during the biochemical conversion of lignocellulosic materials into renewable biofuels and biochemicals. Here, we show that enzymatic hydrolysis of acid-pretreated pine wood with continuous and/or fed-batch enzyme addition improved sugar conversion efficiencies by over sixfold. In addition, specific activity of the hydrolysis enzymes (cellulases, hemicellulases, etc.) increased as a result of continuously washing the residual solids with removal of glucose (avoiding the end product inhibition) and other enzymatic inhibitory compounds (e.g., furfural, hydroxymethyl furfural, organic acids, and phenolics). As part of the continuous hydrolysis, anion exchange resin was tested for its dual application of simultaneous enzyme recovery and removal of potential enzymatic and fermentation inhibitors. Amberlite IRA-96 showed favorable adsorption profiles of inhibitors, especially furfural, hydroxymethyl furfural, and acetic acid with low affinity toward sugars. Affinity of hydrolysis enzymes to adsorb onto the resin allowed for up to 92 % of the enzymatic activity to be recovered using a relatively low-molar NaCl wash solution. Integration of an ion exchange column with enzyme recovery into the proposed fed-batch hydrolysis process can improve the overall biorefinery efficiency and can greatly reduce the production costs of lignocellulosic biorenewable products.

  2. Economic assessment of greenhouse gas reduction through low-grade waste heat recovery using organic Rankine cycle (ORC)

    Energy Technology Data Exchange (ETDEWEB)

    Imran, Muhammad; Park, Byung Sik; Kim, Hyouck Ju; Usman, Muhammad [University of Science and Technology, Daejeon (Korea, Republic of); Lee, Dong Hyun [Korea Institute of Energy Research, Daejeon (Korea, Republic of)

    2015-02-15

    Low-grade waste heat recovery technologies reduce the environmental impact of fossil fuels and improve overall efficiency. This paper presents the economic assessment of greenhouse gas (GHG) reduction through waste heat recovery using organic Rankine cycle (ORC). The ORC engine is one of the mature low temperature heat engines. The low boiling temperature of organic working fluid enables ORC to recover low-temperature waste heat. The recovered waste heat is utilized to produce electricity and hot water. The GHG emissions for equivalent power and hot water from three fossil fuels-coal, natural gas, and diesel oil-are estimated using the fuel analysis approach and corresponding emission factors. The relative decrease in GHG emission is calculated using fossil fuels as the base case. The total cost of the ORC system is used to analyze the GHG reduction cost for each of the considered fossil fuels. A sensitivity analysis is also conducted to investigate the effect of the key parameter of the ORC system on the cost of GHG reduction. Throughout the 20-year life cycle of the ORC plant, the GHG reduction cost for R245fa is 0.02 $/kg to 0.04 $/kg and that for pentane is 0.04 $/kg to 0.05 $/kg. The working fluid, evaporation pressure, and pinch point temperature difference considerably affect the GHG emission.

  3. Umbilical Cable Recovery Load Analysis

    Institute of Scientific and Technical Information of China (English)

    YAN Shu-wang; JIA Zhao-lin; FENG Xiao-wei; LI Shi-tao

    2013-01-01

    Umbilical cable is a kind of integrated subsea cable widely used in the exploration and exploitation of oil and gas field.The severe ocean environment makes great challenges to umbilical maintenance and repair work.Damaged umbilical is usually recovered for the regular operation of the offshore production system.Analysis on cables in essence is a two-point boundary problem.The tension load at the mudline must be known first,and then the recovery load and recovery angle on the vessel can be solved by use of catenary equation.The recovery analysis also involves umbilicalsoil interaction and becomes more complicated.Calculation methods for recovery load of the exposed and buried umbilical are established and the relationship between the position of touch down point and the recovery load as well as the recovery angle and recovery load are analyzed.The analysis results provide a theoretical reference for offshore on-deck operation.

  4. The use of sugammadex for bariatric surgery: analysis of recovery time from neuromuscular blockade and possible economic impact

    Directory of Open Access Journals (Sweden)

    De Robertis E

    2016-06-01

    Full Text Available Edoardo De Robertis,1 Geremia Zito Marinosci,1 Giovanni Marco Romano,1 Ornella Piazza,2 Michele Iannuzzi,1 Fabrizio Cirillo,1 Stefania De Simone,3 Giuseppe Servillo,1 1Department of Neurosciences, Reproductive and Odontostomatologic Sciences, University Federico II, Naples, 2Department of Medicine and Surgery, University of Salerno, Salerno, 3Institute for Research on Innovation and Services for Development, National Research Council, Naples, Italy Background: Neuromuscular block (NMB monitoring and use of reversal agents accelerate the recovery time and improve the workflow in the operating room. We aimed to compare recovery times after sugammadex or neostigmine administration, and estimate the time spent in operating theater and the possible economic impact of a faster recovery, in morbidly obese patients undergoing bariatric surgery. Methods: We conducted a retrospective study that analyzed data from records of morbidly obese patients (body mass index >40 kg/m2 undergoing elective laparoscopic bariatric surgery in which sugammadex or neostigmine were used to reverse NMB. Patients were divided in two groups: group 1 (sugammadex group [SUG] received rocuronium and sugammadex for reversal and group 2 (neostigmine group [NEO] received either rocuronium or cisatracurium and neostigmine. Data are presented as mean (standard deviation. Results: Compared with NEO, SUG group showed shorter times to achieve train-of-four ratio of 0.9 (P<0.05 and an Aldrete score of 10 (P<0.05, a higher cost (€146.7 vs €3.6 [P<0.05], plus a remarkable less duration of operating theater occupancy (P<0.05. Sugammadex cost accounted for 2.58% of the total cost per surgery, while neostigmine cost accounted for 0.06%. Total time saved in SUG group was 19.4 hours, which could be used to perform 12 extra laparoscopic sleeve gastrectomies. Conclusion: Reversal from NMB was significantly faster with sugammadex than with neostigmine. Although sugammadex was substantially

  5. Addressing the recovery of feeding rates in post-exposure feeding bioassays: Cyathura carinata as a case study

    Energy Technology Data Exchange (ETDEWEB)

    Pais-Costa, Antonia Juliana [IMAR—Institute of Marine Research, MARE—Marine and Environmental Sciences Centre, Faculty of Sciences and Technology, University of Coimbra, 3004-517 Coimbra (Portugal); Acevedo, Pelayo [SaBio IREC, Instituto de Investigación en Recursos Cinegéticos (UCLM-CSIC-JCCM), Ciudad Real 13005 (Spain); Marques, João Carlos [IMAR—Institute of Marine Research, MARE—Marine and Environmental Sciences Centre, Faculty of Sciences and Technology, University of Coimbra, 3004-517 Coimbra (Portugal); Martinez-Haro, Mónica, E-mail: monica.martinezharo@gmail.com [IMAR—Institute of Marine Research, MARE—Marine and Environmental Sciences Centre, Faculty of Sciences and Technology, University of Coimbra, 3004-517 Coimbra (Portugal)

    2015-02-15

    Post-exposure bioassays are used in environmental assessment as a cost-effective tool, but the effects of organism's recovery after exposure to pollutant has not yet been addressed in detail. The recoveries of post-exposure feeding rates after being exposed to two sublethal concentrations of cadmium during two different exposure periods (48 h and 96 h) were evaluated under laboratory conditions using the estuarine isopod Cyathura carinata. Results showed that feeding depression was a stable endpoint up to 24 h after cadmium exposure, which is useful for ecotoxicological bioassays. - Highlights: • We studied recovery of post-exposure feeding rates 48–96 h after cadmium exposure. • The assay is based on the isopod Cyathura carinata. • Post-exposure feeding inhibition is a stable sublethal endpoint.

  6. Using mobile phone technology to provide recovery support for women offenders.

    Science.gov (United States)

    Scott, Christy K; Johnson, Kimberly; Dennis, Michael L

    2013-10-01

    Mobile technology holds promise as a recovery tool for people with substance use disorders. However, some populations who may benefit the most may not have access to or experience with mobile phones. Incarcerated women represent a group at high risk for recidivism and relapse to substance abuse. Cost-effective mechanisms must be in place to support their recovery upon release. This study explores using mobile technology as a recovery management tool for women offenders residing in the community following release from jail. This study surveyed 325 minority women offenders with substance use disorders to determine whether or not they use cell phones, their comfort with texting and search features, and the social networks that they access from mobile phones. We found that 83% of survey subjects had cell phones; 30% of those were smartphones. Seventy-seven percent of the women reported access to supportive friends, and 88% had close family members they contacted regularly using mobile technology. Results indicated that most of the women were comfortable using a mobile phone, although the majority of them had prepaid minutes rather than plans, and most did currently use smartphones or have the capability to download applications or access social networks via their phones. Most women reported that they would be comfortable using a mobile phone to text, e-mail, and answer surveys. The high rate of adoption of mobile technology by women offenders makes them a promising target for recovery support delivered via mobile phone.

  7. Recovery of acids from dilute streams : A review of process technologies

    International Nuclear Information System (INIS)

    Talnikar, Vivek Digambar; Mahajan, Yogesh Shankar

    2014-01-01

    Chemical process industries convert raw materials into useful products. Acids, among other chemicals, are used in many industries as reactants, solvents and also as catalysts in a few instances as well. Resulting streams are dilute, from which the acids must be recovered. For recovery, many technologies can be used by which acids can be regained as such or can be converted into other value-added products like esters. Membrane processes and biological processes are being researched academically and practiced industrially. These have their own advantages and disadvantages in view of conversion, energy consumption etc. These are not always advantageous and hence an alternate process technology is necessary like reactive separation (RS). RS is advantageous especially when the acid is to be converted to other useful products by reaction, due to additional advantages or because no other technology is well suited or due to cost considerations alone. Conventional process technologies use the reactor configuration followed by the subsequent separation sequence. This approach can sometimes suffer from lesser conversion, difficulties in separation etc. To overcome these problems, RS has an edge over other processes in terms of the recovery of the useful compounds. Reactive distillation (RD), reactive extraction (RE) and reactive chromatography (RC) are the separation technologies that can be useful for acid recovery in an economically feasible way. This review covers the various processes of acid recovery along with the recent work in the field of reactive separations

  8. A New Remote Communications Link to Reduce Residential PV Solar Costs

    Energy Technology Data Exchange (ETDEWEB)

    King, Randy [Operant Solar Corporation,CA (United States); Sugiyama, Rod [Operant Solar Corporation,CA (United States)

    2017-12-11

    Monitoring of PV/DER site production is expensive to install and unreliable. Among third party systems providers, lost communications links are a growing concern. Nearly 20% of links are failing, provisioning is complex, recovery is expensive, production data is lost, and access is fragmented. FleetLink is a new concept in DER system communications, purpose built for lowering the cost of maintaining active contact with residential end user sites and ensuring that production data is reliably available to third party systems providers. Systems providers require accurate, secure system monitoring and reporting of production data and system faults while driving down overall costs to compete effectively. This plug and play, independently operating communications solution lowers the cost of fleet contact from typically .08 dollars-$.12/W down to .02 dollars -.03/W including installation and maintenance expenses. FleetLink establishes a breakthrough in simplicity that facilitates rapid expansion of residential solar by reducing initial capital outlay and lowering installation labor time and skill levels. The solution also facilitates higher DER installation growth rates by driving down maintenance costs and eliminating communications trouble calls. This is accomplished by the FleetLink’s unique network technology that enables dynamic network configuration for fast changes, and active, self-healing DER site contact for uptime assurance. Using an open source network framework with proprietary, application specific enhancements, FleetLink independently manages connectivity, security, recovery, grid control communications, and fleet expansion while presenting a compliant SunSpec interface to the third party operations centers. The net system cost savings of at least .05 dollars/W supports the SunShot cost goals and the flexibility and scalability of the solution accelerates the velocity and ubiquitous adoption of solar.

  9. Digital recovery management: Characterizing recovery-specific social network site participation and perceived benefit.

    Science.gov (United States)

    Bergman, Brandon G; Kelly, Nathaniel W; Hoeppner, Bettina B; Vilsaint, Corrie L; Kelly, John F

    2017-06-01

    Research shows that digital social network sites (SNSs) may be valuable platforms to effect health behavior change. Little is known specifically about their ability to help address alcohol and other drug problems. This gap is noteworthy, given that individuals are already participating in existing, recovery-specific SNSs (hereafter referred to as recovery SNSs): online communities with the functionality of conventional SNSs (e.g., Facebook) that focus on substance use disorder (SUD) recovery. For example, InTheRooms.com (ITR) is a large, well-known recovery SNS that is available for free 24 hr/day via website and mobile smartphone applications. It offers recovery tools within a digital social milieu for over 430,000 registered users. To augment the knowledge base on recovery SNS platforms, we conducted an online survey of 123 ITR participants (M = 50.8 years old; 56.9% female; 93.5% White; M = 7.3 years of abstinence, range of 0-30 years; 65% cited alcohol as their primary substance). Respondents engaged with ITR, on average, for about 30 min/day several times each week. Daily meditation prompts and live online video meetings were the most commonly utilized resources. Participants generally endorsed ITR as a helpful platform, particularly with respect to increased abstinence/recovery motivation and self-efficacy. Compared to individuals abstinent for 1 or more years, those abstinent less than 1 year (including nonabstinent individuals) showed similar rates of engagement with ITR activities and similar levels of perceived benefit. Our findings suggest that longitudinal studies are warranted to examine the clinical utility of ITR and other recovery SNSs as SUD treatment adjuncts and/or recovery self-management tools. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  10. Concept of Heat Recovery from Exhaust Gases

    Science.gov (United States)

    Bukowska, Maria; Nowak, Krzysztof; Proszak-Miąsik, Danuta; Rabczak, Sławomir

    2017-10-01

    The theme of the article is to determine the possibility of waste heat recovery and use it to prepare hot water. The scope includes a description of the existing sample of coal-fired boiler plant, the analysis of working condition and heat recovery proposals. For this purpose, a series of calculations necessary to identify the energy effect of exhaust temperature decreasing and transferring recovery heat to hot water processing. Heat recover solutions from the exhaust gases channel between boiler and chimney section were proposed. Estimation for the cost-effectiveness of such a solution was made. All calculations and analysis were performed for typical Polish conditions, for coal-fired boiler plant. Typicality of this solution is manifested by the volatility of the load during the year, due to distribution of heat for heating and hot water, determining the load variation during the day. Analysed system of three boilers in case of load variation allows to operational flexibility and adaptation of the boilers load to the current heat demand. This adaptation requires changes in the operating conditions of boilers and in particular assurance of properly conditions for the combustion of fuel. These conditions have an impact on the existing thermal loss and the overall efficiency of the boiler plant. On the boiler plant efficiency affects particularly exhaust gas temperature and the excess air factor. Increasing the efficiency of boilers plant is possible to reach by following actions: limiting the excess air factor in coal combustion process in boilers and using an additional heat exchanger in the exhaust gas channel outside of boilers (economizer) intended to preheat the hot water.

  11. Upside, downside: Who should bear the unanticipated costs of nuclear decommissioning?

    International Nuclear Information System (INIS)

    Riddich, L.A.

    1994-01-01

    A great deal of attention is currently being directed to issues surrounding the decommissioning of nuclear generation plants. Chief among these is determining the best way to recover the associated costs. The cost-recovery procedure should be tied to three things: (1) the nature of the business risks created by nuclear power, (2) who bears those risks now, and (3) who has historically been compensated for bearing those risks in the past. Further, and important analogy can be made to past experience with utilities' diversification into other areas of business. It is important for regulators to balance the costs to the customer against the compensation that investors have already received for bearing the risk of nuclear power. Each case will be different, but it is neither fair nor wise to force all costs on customers

  12. Applicability of Zeolite Based Systems for Ammonia Removal and Recovery From Wastewater.

    Science.gov (United States)

    Das, Pallabi; Prasad, Bably; Singh, Krishna Kant Kumar

    2017-09-01

      Ammonia discharged in industrial effluents bears deleterious effects and necessitates remediation. Integrated systems devoted to recovery of ammonia in a useful form and remediation of the same addresses the challenges of waste management and its utilization. A comparative performance evaluation study was undertaken to access the suitability of different zeolite based systems (commercial zeolites and zeolites synthesized from fly ash) for removal of ammonia followed by its subsequent release. Four main parameters which were studied to evaluate the applicability of such systems for large scale usage are cost-effectiveness, ammonia removal efficiency, performance on regeneration, and ammonia release percentage. The results indicated that synthetic zeolites outperformed zeolites synthesized from fly ash, although the later proved to be more efficient in terms of total cost incurred. Process technology development in this direction will be a trade-of between cost and ammonia removal and release efficiencies.

  13. Radioactive Demonstration of Caustic Recovery from Low-Level Alkaline Nuclear Waste by an Electrochemical Separation Process

    International Nuclear Information System (INIS)

    Hobbs, D.T.

    1998-04-01

    Bench-scale radioactive tests successfully demonstrated an electrochemical process for the recovery of sodium hydroxide (caustic) from Decontaminated Salt Solution produced from the In-Tank Precipitation and Effluent Treatment Processes at the Savannah River Site (SRS). This testing evaluated two membranes: an organic-based membrane, Nafion Type 350, manufactured by E. I. duPont de Nemours ampersand Company, Inc. (DuPont) and an inorganic-based membrane, NAS D, being developed by Ceramatec. Both membranes successfully separated caustic from radioactive SRS waste.Key findings of the testing indicate the following attributes and disadvantages of each membrane. The commercially-available Nafion membrane proved highly conductive. Thus, the electrochemical cell can operate at high current density minimizing the number of cells at the desired volumetric processing rate. Testing indicated cesium transported across the Nafion membrane into the caustic product. Therefore, the caustic product will contain low-levels of radioactive cesium due to the presence of 134,137 Cs in the waste feed. To meet customer requirements, a post treatment stage may prove necessary to remove radioactive cesium resulting in increased overall process costs and decreased cost savings. In contrast to the Nafion membrane, the NAS D membrane demonstrated the production of caustic with much lower levels of gamma radioactivity ( 137 Cs activity was < 51 dpm/g). Therefore, the caustic product could possibly release for onsite/offsite use without further treatment. The NAS D membrane remains in the development stage and does not exist as a commercial product. Operating costs and long-term membrane durability remain unknown.Caustic recovery has been successfully demonstrated in a bench-scale, 2-compartment electrochemical reactor operated for brief periods of time with simulated and radioactive waste solutions and two different types of membranes. The next phase of testing should be directed at (1

  14. Assessing the integration of forward osmosis and anaerobic digestion for simultaneous wastewater treatment and resource recovery.

    Science.gov (United States)

    Ansari, Ashley J; Hai, Faisal I; Price, William E; Ngo, Huu H; Guo, Wenshan; Nghiem, Long D

    2018-07-01

    This study assessed the performance and key challenges associated with the integration of forward osmosis (FO) and anaerobic digestion for wastewater treatment and resource recovery. Using a thin film composite polyamide FO membrane, maximising the pre-concentration factor (i.e. system water recovery) resulted in the enrichment of organics and salinity in wastewater. Biomethane potential evaluation indicated that methane production increased correspondingly with the FO pre-concentration factor due to the organic retention in the feed solution. At 90% water recovery, about 10% more methane was produced when using NaOAc compared with NaCl because of the contribution of biodegradable reverse NaOAc flux. No negative impact on anaerobic digestion was observed when wastewater was pre-concentrated ten-fold (90% water recovery) for both draw solutes. Interestingly, the unit cost of methane production using NaOAc was slightly lower than NaCl due to the lower reverse solute flux of NaOAc, although NaCl is a much cheaper chemical. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

  15. 75 FR 34448 - Proposed CERCLA Administrative Cost Recovery Settlement; Great Lakes Container Corporation...

    Science.gov (United States)

    2010-06-17

    ... Settlement; Great Lakes Container Corporation Superfund Site, Coventry Rhode Island AGENCY: Environmental... and future response costs concerning the Great Lakes Container Corporation Superfund Site, located in...), Boston, MA 02109-3912, (617) 918-1216. Comments should reference the Great Lakes Container Corporation...

  16. Disaster recovery using VMware vSphere Replication and vCenter Site Recovery Manager

    CERN Document Server

    GB, Abhilash

    2014-01-01

    This is a step-by-step guide that will help you understand disaster recovery using VMware vSphere Replication 5.5 and VMware vCenter Site Recovery Manager (SRM) 5.5. The topics and configuration procedures are accompanied with relevant screenshots, flowcharts, and logical diagrams that makes grasping the concepts easier. This book is a guide for anyone who is keen on using vSphere Replication or vCenter Site Recovery Manager as a disaster recovery solution. This is an excellent handbook for solution architects, administrators, on-field engineers, and support professionals. Although the book as

  17. Characterizing and modeling the free recovery and constrained recovery behavior of a polyurethane shape memory polymer

    International Nuclear Information System (INIS)

    Volk, Brent L; Lagoudas, Dimitris C; Maitland, Duncan J

    2011-01-01

    In this work, tensile tests and one-dimensional constitutive modeling were performed on a high recovery force polyurethane shape memory polymer that is being considered for biomedical applications. The tensile tests investigated the free recovery (zero load) response as well as the constrained displacement recovery (stress recovery) response at extension values up to 25%, and two consecutive cycles were performed during each test. The material was observed to recover 100% of the applied deformation when heated at zero load in the second thermomechanical cycle, and a stress recovery of 1.5–4.2 MPa was observed for the constrained displacement recovery experiments. After the experiments were performed, the Chen and Lagoudas model was used to simulate and predict the experimental results. The material properties used in the constitutive model—namely the coefficients of thermal expansion, shear moduli, and frozen volume fraction—were calibrated from a single 10% extension free recovery experiment. The model was then used to predict the material response for the remaining free recovery and constrained displacement recovery experiments. The model predictions match well with the experimental data

  18. EUV tools: hydrogen gas purification and recovery strategies

    Science.gov (United States)

    Landoni, Cristian; Succi, Marco; Applegarth, Chuck; Riddle Vogt, Sarah

    2015-03-01

    The technological challenges that have been overcome to make extreme ultraviolet lithography (EUV) a reality have been enormous1. This vacuum driven technology poses significant purity challenges for the gases employed for purging and cleaning the scanner EUV chamber and source. Hydrogen, nitrogen, argon and ultra-high purity compressed dry air (UHPCDA) are the most common gases utilized at the scanner and source level. Purity requirements are tighter than for previous technology node tools. In addition, specifically for hydrogen, EUV tool users are facing not only gas purity challenges but also the need for safe disposal of the hydrogen at the tool outlet. Recovery, reuse or recycling strategies could mitigate the disposal process and reduce the overall tool cost of operation. This paper will review the types of purification technologies that are currently available to generate high purity hydrogen suitable for EUV applications. Advantages and disadvantages of each purification technology will be presented. Guidelines on how to select the most appropriate technology for each application and experimental conditions will be presented. A discussion of the most common approaches utilized at the facility level to operate EUV tools along with possible hydrogen recovery strategies will also be reported.

  19. A tutorial on activity-based costing of electronic health records.

    Science.gov (United States)

    Federowicz, Marie H; Grossman, Mila N; Hayes, Bryant J; Riggs, Joseph

    2010-01-01

    As the American Recovery and Restoration Act of 2009 allocates $19 billion to health information technology, it will be useful for health care managers to project the true cost of implementing an electronic health record (EHR). This study presents a step-by-step guide for using activity-based costing (ABC) to estimate the cost of an EHR. ABC is a cost accounting method with a "top-down" approach for estimating the cost of a project or service within an organization. The total cost to implement an EHR includes obvious costs, such as licensing fees, and hidden costs, such as impact on productivity. Unlike other methods, ABC includes all of the organization's expenditures and is less likely to miss hidden costs. Although ABC is used considerably in manufacturing and other industries, it is a relatively new phenomenon in health care. ABC is a comprehensive approach that the health care field can use to analyze the cost-effectiveness of implementing EHRs. In this article, ABC is applied to a health clinic that recently implemented an EHR, and the clinic is found to be more productive after EHR implementation. This methodology can help health care administrators assess the impact of a stimulus investment on organizational performance.

  20. Assessing the additional impact of Process Recovery Communications on Customer Outcomes: A Comprehensive Service Recovery Approach

    OpenAIRE

    Y. VAN VAERENBERGH; B. LARIVIÈRE; I. VERMEIR

    2009-01-01

    Purpose – Services recoveries following service failures not only imply customer recovery opportunities in which customer-company relationships can be restored, they can also result in process improvements (i.e. process recoveries in literature). This paper seeks to identify the additional impact of process recoveries on four customer outcome variables (satisfaction with service recovery, overall satisfaction, repurchase intent and word-of-mouth) by communicating these improvements back to th...

  1. Aircraft Route Recovery Based on An Improved GRASP Method

    Directory of Open Access Journals (Sweden)

    Yang He

    2017-01-01

    Full Text Available Aircrafts maintenance, temporary airport closures are common factors that disrupt normal flight schedule. The aircraft route recovery aims to recover original schedules by some strategies, including flights swaps, and cancellations, which is a NP-hard problem. This paper proposes an improved heuristic procedure based on Greedy Random Adaptive Search Procedure (GRASP to solve this problem. The effectiveness and high global optimization capability of the heuristic is illustrated through experiments based on large-scale problems. Compared to the original one, it is shown that the improved procedure can find feasible flight recovered schedules with lower cost in a short time.

  2. Methane recovery from animal manures: A current opportunities casebook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This Casebook examines some of the current opportunities for the recovery of methane from the anaerobic digestion of animal manures US livestock operations currently employ four types of anaerobic digester technology: Slurry, plug flow, complete mix, and covered lagoon. An introduction to the engineering economies of these technologies is provided, and possible end-use applications for the methane gas generated by the digestion process are discussed. The economic evaluations are based on engineering studies of digesters that generate electricity from the recovered methane. Regression models, which can be used to estimate digester cost and internal rate of return, are developed from the evaluations.

  3. Maintenance and Recovery of Water System for Injection (WFI)

    International Nuclear Information System (INIS)

    Wan Anuar Wan Awang; Ahmad Firdaus Jalil; Wan Mohd Firdaus Wan Ishak

    2015-01-01

    Water system for injection (WFI) is one of the main component in manufacturing pharmaceutical materials and radiopharmaceuticals. This system accredited in 2005. Water quality produced analyzed and give the unsatisfied results. The operation of WFI was stopped temporarily due to technical problems. In 2013, recovery works were implemented with budget of RM 226,500.00. Comprehensive maintenance were implemented by Rykertech (Asia) Sdn. Bhd. With duration of 24 months (October 2014 until September 2016) with cost RM 473,550.00. Now, this system operated in good condition and produced water that meet with the specifications. (author)

  4. Enhanced Recovery Utilizing Variable Frequency Drives and a Distributed Power System

    Energy Technology Data Exchange (ETDEWEB)

    Randy Peden; Sanjiv Shah

    2005-07-26

    This report describes complete results of the project entitled ''Enhanced Recovery Utilizing Variable Frequency Drives and a Distributed Power System''. This demonstration project was initiated in July 2003 and completed in March 2005. The objective of the project was to develop an integrated power production/variable frequency drive system that could easily be deployed in the oil field that would increase production and decrease operating costs. This report describes all the activities occurred and documents results of the demonstration.

  5. the dutch crisis and recovery act: economic recovery and legal crisis

    African Journals Online (AJOL)

    Jonathan

    THE DUTCH CRISIS AND RECOVERY ACT: ECONOMIC RECOVERY AND. LEGAL CRISIS? J Verschuuren. 1 Introduction. Throughout the world, governments are responding to the financial and economic crisis. Such responses vary from supporting the banking system to adopting economic stimulus packages. The latter ...

  6. Is high recovery more effective than expected recovery in addressing service failure? - a moral judgment perspective

    OpenAIRE

    Chen, Tong; Ma, Ke; Bian, Xuemei; Zheng, Chundong; Devlin, James

    2018-01-01

    In the context of two distinctive consumer categories and two different product settings, this research examines the effects of recovery on recovery performance as a function of consumer moral judgment of service failure. The findings of two studies reveal that consumers' response to recovery anchors on the magnitude of recovery but these responses are adjusted according to consumers' moral judgment of service failure. Specifically, consumers react more positively toward expected recovery tha...

  7. Surface acoustic wave sensors/gas chromatography; and Low quality natural gas sulfur removal and recovery CNG Claus sulfur recovery process

    Energy Technology Data Exchange (ETDEWEB)

    Klint, B.W.; Dale, P.R.; Stephenson, C.

    1997-12-01

    This topical report consists of the two titled projects. Surface Acoustic Wave/Gas Chromatography (SAW/GC) provides a cost-effective system for collecting real-time field screening data for characterization of vapor streams contaminated with volatile organic compounds (VOCs). The Model 4100 can be used in a field screening mode to produce chromatograms in 10 seconds. This capability will allow a project manager to make immediate decisions and to avoid the long delays and high costs associated with analysis by off-site analytical laboratories. The Model 4100 is currently under evaluation by the California Environmental Protection Agency Technology Certification Program. Initial certification focuses upon the following organics: cis-dichloroethylene, chloroform, carbon tetrachloride, trichlorethylene, tetrachloroethylene, tetrachloroethane, benzene, ethylbenzene, toluene, and o-xylene. In the second study the CNG Claus process is being evaluated for conversion and recovery of elemental sulfur from hydrogen sulfide, especially found in low quality natural gas. This report describes the design, construction and operation of a pilot scale plant built to demonstrate the technical feasibility of the integrated CNG Claus process.

  8. Electrostatic direct energy converter performance and cost scaling laws

    International Nuclear Information System (INIS)

    Hoffman, M.A.

    1977-08-01

    This study is concerned with electrostatic type direct energy converters for direct recovery of a large fraction of the plasma ion energy from fusion reactors. Simplified equations are presented for each of the important loss mechanisms in both single-stage direct converters and multistage ''Venetian Blind'' type direct converters. These equations can be used to estimate the efficiency and electric power output of the direct converter subsystem. Scaling relations for the cost of each major component in the direct converter subsystem are also given; these include the vacuum tank, direct converter modules, the DC power conditioning equipment, cryogenic vacuum pumping system and the thermal bottoming plant. The performance and cost scaling laws have been developed primarily for use in overall fusion power plant systems codes. However, to illustrate their utility, cost-effectiveness studies of two specific reference direct converter designs are presented in terms of the specific capital costs (i.e., the capital cost per unit electric power produced) for the Direct Converter Subsystem alone. Some examples of design improvements which can significantly reduce the specific capital costs of the Direct Converter Subsystem are also given

  9. Incremental natural gas resources through infield reserve growth/secondary natural gas recovery

    Energy Technology Data Exchange (ETDEWEB)

    Finley, R.J.; Levey, R.A.; Hardage, B.A.

    1993-12-31

    The primary objective of the Infield Reserve Growth/Secondary Natural Gas Recovery (SGR) project is to develop, test, and verify technologies and methodologies with near- to midterm potential for maximizing the recovery of natural gasfrom conventional reservoirs in known fields. Additional technical and technology transfer objectives of the SGR project include: To establish how depositional and diagenetic heterogeneities in reservoirs of conventional permeability cause reservoir compartmentalization and, hence, incomplete recovery of natural gas. To document examples of reserve growth occurrence and potential from fluvial and deltaic sandstones of the Texas gulf coast basin as a natural laboratory for developing concepts and testing applications to find secondary gas. To demonstrate how the integration of geology, reservoir engineering, geophysics, and well log analysis/petrophysics leads to strategic recompletion and well placement opportunities for reserve growth in mature fields. To transfer project results to a wide array of natural gas producers, not just as field case studies, but as conceptual models of how heterogeneities determine natural gas flow units and how to recognize the geologic and engineering clues that operators can use in a cost-effective manner to identify incremental, or secondary, gas.

  10. Optimally efficient swimming in hyper-redundant mechanisms: control, design, and energy recovery

    International Nuclear Information System (INIS)

    Wiens, A J; Nahon, M

    2012-01-01

    Hyper-redundant mechanisms (HRMs), also known as snake-like robots, are highly adaptable during locomotion on land. Researchers are currently working to extend their capabilities to aquatic environments through biomimetic undulatory propulsion. In addition to increasing the versatility of the system, truly biomimetic swimming could also provide excellent locomotion efficiency. Unfortunately, the complexity of the system precludes the development of a functional solution to achieve this. To explore this problem, a rapid optimization process is used to generate efficient HRM swimming gaits. The low computational cost of the approach allows for multiple optimizations over a broad range of system conditions. By observing how these conditions affect optimal kinematics, a number of new insights are developed regarding undulatory swimming in robotic systems. Two key conditions are varied within the study, swimming speed and energy recovery. It is found that the swimmer mimics the speed control behaviour of natural fish and that energy recovery drastically increases the system's efficiency. Remarkably, this efficiency increase is accompanied by a distinct change in swimming kinematics. With energy recovery, the swimmer converges to a clearly anguilliform gait, without, it tends towards the carangiform mode. (paper)

  11. Recovery Spirituality

    Directory of Open Access Journals (Sweden)

    Ernest Kurtz

    2015-01-01

    Full Text Available There is growing interest in Alcoholics Anonymous (A.A. and other secular, spiritual, and religious frameworks of long-term addiction recovery. The present paper explores the varieties of spiritual experience within A.A., with particular reference to the growth of a wing of recovery spirituality promoted within A.A. It is suggested that the essence of secular spirituality is reflected in the experience of beyond (horizontal and vertical transcendence and between (connection and mutuality and in six facets of spirituality (Release, Gratitude, Humility, Tolerance, Forgiveness, and a Sense of Being-at-home shared across religious, spiritual, and secular pathways of addiction recovery. The growing varieties of A.A. spirituality (spanning the “Christianizers” and “Seculizers” reflect A.A.’s adaptation to the larger diversification of religious experience and the growing secularization of spirituality across the cultural contexts within which A.A. is nested.

  12. Vehicle recovery and towing guideline

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-01-15

    This guideline was developed to provide light and medium duty vehicles operators in the oil and gas industry with a set of best practices for avoiding injury and damage during the recovery of stuck vehicles. The aim of the guideline was to increase awareness of safety issues and promote the safe usage of the vehicles by personnel throughout the petroleum industry and to establish minimum standards of practice for vehicle recovery. The guideline included a step-by-step guide for pulling out a vehicle with a recovery strap as well as vehicle-mounted winch procedures. Pre-job checklists for both procedures were provided. Issues related to the strength rating of vehicle tow hooks and hitch receivers were discussed, as well as some of the hazards associated with steep terrains and heavy mud. The guideline also included recommendations for a vehicle recovery kit with instructions on vehicle recovery, a recovery strap, a recovery hitch and shackle, a collapsible shovel, traffic cones and reflector flares, and a heavy blanket and gloves. 7 refs., 2 tabs., 13 figs.

  13. Recovery from a psychiatrist's viewpoint.

    Science.gov (United States)

    Diamond, Ronald J

    2006-09-01

    Recovery is not the same as cure. Recovery from mental illness is the process of having more to life than just illness. It is an ongoing process rather than simply a goal that can be achieved. Recovery from the stigma of mental illness may be as difficult as recovery from the illness itself. Several common, but incorrect, beliefs can interfere with the recovery process. Myths include the belief that the illness has an inherently downhill course, that rehabilitation is useful only after stabilization, and that people with schizophrenia can only work at low-level jobs. People who have schizophrenia have reported that their own process of recovery was helped by their determination to get better, an understanding of the illness, taking personal responsibility, having friends who accept them, an optimistic attitude, and spiritual beliefs that help them find meaning in life.

  14. Actinide recovery using aqueous biphasic extraction: Initial developmental studies

    International Nuclear Information System (INIS)

    Chaiko, D.J.; Mensah-Biney, R.; Mertz, C.J.; Rollins, A.N.

    1992-08-01

    Aqueous biphasic extraction systems are being developed to treat radioactive wastes. The separation technique involves the selective partitioning of either solutes or colloid-size particles between two scible aqueous phases. Wet grinding of plutonium residues to an average particle size of one micron will be used to liberate the plutonium from the bulk of the particle matrix. The goal is to produce a plutonium concentrate that will integrate with existing and developing chemical recovery processes. Ideally, the process would produce a nonTRU waste stream. Coupling physical beneficiation with chemical processing will result in a substantial reduction in the volume of mixed wastes generated from dissolution recovery processes. As part of this program, we will also explore applications of aqueous biphasic extraction that include the separation and recovery of dissolved species such as metal ions and water-soluble organics. The expertise and data generated in this work will form the basis for developing more cost-effective processes for handling waste streams from environmental restoration and waste management activities within the DOE community. This report summarizes the experimental results obtained during the first year of this effort. Experimental efforts were focused on elucidating the surface and solution chemistry variables which govern partitioning behavior of plutonium and silica in aqueous biphasic extraction systems. Additional efforts were directed toward the development of wet grinding methods for producing ultrafine particles with diameters of one micron or less

  15. Actinide recovery using aqueous biphasic extraction: Initial developmental studies

    Energy Technology Data Exchange (ETDEWEB)

    Chaiko, D.J.; Mensah-Biney, R.; Mertz, C.J.; Rollins, A.N.

    1992-08-01

    Aqueous biphasic extraction systems are being developed to treat radioactive wastes. The separation technique involves the selective partitioning of either solutes or colloid-size particles between two scible aqueous phases. Wet grinding of plutonium residues to an average particle size of one micron will be used to liberate the plutonium from the bulk of the particle matrix. The goal is to produce a plutonium concentrate that will integrate with existing and developing chemical recovery processes. Ideally, the process would produce a nonTRU waste stream. Coupling physical beneficiation with chemical processing will result in a substantial reduction in the volume of mixed wastes generated from dissolution recovery processes. As part of this program, we will also explore applications of aqueous biphasic extraction that include the separation and recovery of dissolved species such as metal ions and water-soluble organics. The expertise and data generated in this work will form the basis for developing more cost-effective processes for handling waste streams from environmental restoration and waste management activities within the DOE community. This report summarizes the experimental results obtained during the first year of this effort. Experimental efforts were focused on elucidating the surface and solution chemistry variables which govern partitioning behavior of plutonium and silica in aqueous biphasic extraction systems. Additional efforts were directed toward the development of wet grinding methods for producing ultrafine particles with diameters of one micron or less.

  16. Resilience of traffic networks: From perturbation to recovery via a dynamic restricted equilibrium model

    International Nuclear Information System (INIS)

    Nogal, Maria; O'Connor, Alan; Caulfield, Brian; Martinez-Pastor, Beatriz

    2016-01-01

    When a disruptive event takes place in a traffic network some important questions arise, such as how stressed the traffic network is, whether the system is able to respond to this stressful situation, or how long the system needs to recover a new equilibrium position after suffering this perturbation. Quantifying these aspects allows the comparison of different systems, to scale the degree of damage, to identify traffic network weaknesses, and to analyse the effect of user knowledge about the traffic network state. The indicator that accounts for performance and recovery pattern under disruptive events is known as resilience. This paper presents a methodology to assess the resilience of a traffic network when a given perturbation occurs, from the beginning of the perturbation to the total system recovery. To consider the dynamic nature of the problem, a new dynamic equilibrium-restricted assignment model is presented to simulate the network performance evolution, which takes into consideration important aspects, such as the cost increment due to the perturbation, the system impedance to alter its previous state and the user stress level. Finally, this methodology is used to evaluate the resilience indices of a real network. - Highlights: • Method to assess the resilience of a traffic network suffering progressive impacts. • It simulates the dynamic response during the perturbation and system recovery. • The resilience index is based on the travel costs and the stress level of users. • It considers the capacity of adaptation of the system to the new situations. • The model evaluates redundancy, adaptability, ability to recover, etc.

  17. Houston Recovery Initiative: A Rich Case Study of Building Recovery Communities One Voice at a Time.

    Science.gov (United States)

    Bitting, Sara; Nash, Angela; Ochoa, Ashley

    2016-01-01

    Recovery from alcohol and drug problems is a process of change through which an individual achieves control and improved quality of life. Recovery is a primary goal for individuals with substance use disorder as it provides hope that treatment and overall health are possible for every individual. More than 23 million Americans are in recovery from addiction to alcohol and other drugs.Recovery-oriented systems of care (ROSC) are networks of community services and peer support that help individuals and families achieve recovery from substances and improve overall health. ROSC is a strengths-based and person-centered model that leverages existing community resources to address the needs of individuals and families as they progress through the journey of recovery. The ROSC model serves as the foundation of the Houston Recovery Initiative (HRI).The purpose of this article is to describe the history, development, and infrastructure of the HRI, which is a volunteer collaboration whose main goal is to educate the community on recovery and broaden the recovery safety net for people with substance use disorder in Houston, Texas. Since 2010, the HRI has grown to include more than 200 agencies across the spectrum of treatment and recovery support services in Houston so as to provide a resource for the community. Herein, we detail efforts to grow the HRI, lessons learned, future plans, and resources needed to move the HRI forward.

  18. Xenon Recovery at Room Temperature using Metal-Organic Frameworks

    Energy Technology Data Exchange (ETDEWEB)

    Elsaidi, Sameh K. [Physical and Computational Science Directorate, Pacific Northwest National Laboratory, Richland WA 99352 USA; Chemistry Department, Faculty of Science, Alexandria University, P. O. Box 426 Ibrahimia Alexandria 21321 Egypt; Ongari, Daniele [Laboratory of Molecular Simulation, Institut des Sciences et Ingeénierie Chimiques, Ecole Polytechnique Fédérale de Lausanne (EPFL), Rue de l' Industrie 17 1951 Sion Valais Switzerland; Xu, Wenqian [X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, Argonne IL 60439 USA; Mohamed, Mona H. [Chemistry Department, Faculty of Science, Alexandria University, P. O. Box 426 Ibrahimia Alexandria 21321 Egypt; Haranczyk, Maciej [IMDEA Materials Institute, c/Eric Kandel 2 28906 Getafe, Madrid Spain; Thallapally, Praveen K. [Physical and Computational Science Directorate, Pacific Northwest National Laboratory, Richland WA 99352 USA

    2017-07-24

    Xenon is known to be a very efficient anesthetic gas but its cost prohibits the wider use in medical industry and other potential applications. It has been shown that Xe recovery and recycle from anesthetic gas mixture can significantly reduce its cost as anesthetic. The current technology uses series of adsorbent columns followed by low temperature distillation to recover Xe, which is expensive to use in medical facilities. Herein, we propose much efficient and simpler system to recover and recycle Xe from simulant exhale anesthetic gas mixture at room temperature using metal organic frameworks. Among the MOFs tested, PCN-12 exhibits unprecedented performance with high Xe capacity, Xe/N2 and Xe/O2 selectivity at room temperature. The in-situ synchrotron measurements suggest the Xe is occupied in the small pockets of PCN-12 compared to unsaturated metal centers (UMCs). Computational modeling of adsorption further supports our experimental observation of Xe binding sites in PCN-12.

  19. Xenon Recovery at Room Temperature using Metal-Organic Frameworks

    Energy Technology Data Exchange (ETDEWEB)

    Elsaidi, Sameh K. [Physical and Computational Science Directorate, Pacific Northwest National Laboratory, Richland WA 99352 USA; Chemistry Department, Faculty of Science, Alexandria University, P. O. Box 426 Ibrahimia Alexandria 21321 Egypt; Ongari, Daniele [Laboratory of Molecular Simulation, Institut des Sciences et Ingeénierie Chimiques, Ecole Polytechnique Fédérale de Lausanne (EPFL), Rue de l' Industrie 17 1951 Sion Valais Switzerland; Xu, Wenqian [X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, Argonne IL 60439 USA; Mohamed, Mona H. [Chemistry Department, Faculty of Science, Alexandria University, P. O. Box 426 Ibrahimia Alexandria 21321 Egypt; Haranczyk, Maciej [IMDEA Materials Institute, c/Eric Kandel 2 28906 Getafe, Madrid Spain; Thallapally, Praveen K. [Physical and Computational Science Directorate, Pacific Northwest National Laboratory, Richland WA 99352 USA

    2017-07-24

    Xenon is known to be a very efficient anesthetic gas but its cost prohibits the wider use in medical industry and other potential applications. It has been shown that Xe recovery and recycle from anesthetic gas mixture can significantly reduce its cost as anesthetic. The current technology uses series of adsorbent columns followed by low temperature distillation to recover Xe, which is expensive to use in medical facilities. Herein, we propose much efficient and simpler system to recover and recycle Xe from simulant exhale anesthetic gas mixture at room temperature using metal organic frameworks. Among the MOFs tested, PCN-12 exhibits unprecedented performance with high Xe capacity, Xe/O2, Xe/N2 and Xe/CO2 selectivity at room temperature. The in-situ synchrotron measurements suggest the Xe is occupied in the small pockets of PCN-12 compared to unsaturated metal centers (UMCs). Computational modeling of adsorption further supports our experimental observation of Xe binding sites in PCN-12.

  20. Loop transfer recovery for general observer architecture

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Søgaard-Andersen, Per; Stoustrup, Jakob

    1991-01-01

    A general and concise formulation is given of the loop transfer recovery (LTR) design problem based on recovery errors. Three types of recovery errors are treated: open loop recovery, sensitivity recovery and input-output recovery errors. The three corresponding versions of the asymptotic recovery...... recovery cases. This general recovery formulation covers all known observer based compensator types as special cases. The conditions given in this setting are effectively the aim of all known LTR design methods. The recovery formulation is interpreted in terms of a modelmatching problem as well, which...... is examined by means of the Q-parametrization. It is shown how the general controller obtained by the Q-parametrization can be written as a Luenberger observer based controller. In all cases, n controller states suffice to achieve recovery. The compensators are characterized for errors both on the input...

  1. Quality of Recovery after Anesthesia: Validation of the Portuguese Version of the 'Quality of Recovery 15' Questionnaire.

    Science.gov (United States)

    Sá, Ana Carolina; Sousa, Gabriela; Santos, Alice; Santos, Cristina; Abelha, Fernando José

    2015-01-01

    The "Quality of Recovery 15" questionnaire is used for the study of quality recovery after anesthesia. The aim of this study was to validate the Portuguese version of "Quality of Recovery 15" questionnaire. After study approval by the institutional ethics committee, an observational and cohort prospective study was conducted on patients scheduled for elective surgery from June to August 2013. The "Quality of Recovery 15" questionnaire was translated in accordance with available guidelines. The "Quality of Recovery 15" Portuguese version was used before surgery (T0) and 24h postoperatively (T1) on 170 patients. Patients who were unable to give informed consent or had cognitive impairment were excluded. Poor quality of recovery was defined for "Quality of Recovery 15" score at T1 lower than the mean "Quality of Recovery 15" score minus 1 standard deviation. Reliability and observer disagreement was assessed using interclass correlation. Non-parametric tests were used for comparisons. There was a negative correlation between "Quality of Recovery 15" score and time spent in the postanesthesia care(p = -0.264, p = 0.004) and length of hospital stay (p = -0.274, p = 0.004). Thirty-two patients (19%) had poor quality of recovery. Patients with poor quality of recovery had more frequently diabetes mellitus and hypertension and they were taking antidepressants drugs more frequently. Patients with poor quality of recovery were more frequently submitted to combined anesthesia and less frequently to general anesthesia and locoregional anesthesia (p = 0.008). The questionnaire had a good internal consistency and test-retest reliability was good. The Portuguese version of the "Quality of Recovery 15" showed a good correlation with the original. This questionnaire appears to be an accurate and reliable assessment for quality of recovery.

  2. Facilitating the recovery of natural evergreen forests in South Africa via invader plant stands

    Directory of Open Access Journals (Sweden)

    Coert J. Geldenhuys

    2017-11-01

    Full Text Available Contrary to general belief, planted and naturalized stands of introduced species facilitate the recovery of natural evergreen forests and their diversity. Forest rehabilitation actions are often performed at great cost: mature forest species are planted, while species with adaptations to recover effectively and quickly after severe disturbance are ignored; or stands are cleared of invasive alien species before native tree species are planted. By contrast, cost-effective commercial plantation forestry systems generally use fast-growing pioneer tree species introduced from other natural forest regions. Such planted tree stands often facilitate the recovery of shade-tolerant native forest species. This paper provides a brief overview of disturbance-recovery processes at landscape level, and how pioneer stands of both native and introduced tree species develop from monocultures to diverse mature forest communities. It uses one example of a study of how natural forest species from small forest patches of 3 ha in total invaded a 90-ha stand of the invasive Black wattle, Acacia mearnsii, over a distance of 3.1 ha at Swellendam near Cape Town, South Africa. The study recorded 329 forest species clusters across the wattle stand: more large clusters closer to and more smaller clusters further away from natural forest patches. The 28 recorded forest species (of potentially 40 species in the surrounding forest patches included 79% tree and 21% shrub species. Colonizing forest species had mostly larger fleshy fruit and softer small seeds, and were dispersed by mostly birds and primate species. Maturing forest trees within developing clusters in the wattle stand became a source for forest regeneration away from the clusters, showing different expansion patterns. Four sets of fenced-unfenced plots in the wattle stand showed the impact of browsing by livestock, antelope, rodents and insects on the successful establishment of regenerating forest species, and the

  3. Magnetic blocking direct-recovery efficiency

    International Nuclear Information System (INIS)

    Whealton, J.H.; Wooten, J.H.; McGaffey, R.W.

    1981-10-01

    The ion recovery efficiency of a transverse magnetic field monochromatic direct recovery device intended for intense neutral beams is examined theoretically by solving a Poisson-Vlasov equation. An optimum in recovery efficiency is obtained for finite ion current density and excess initial speed

  4. Recovery From Chronic Low Back Pain After Osteopathic Manipulative Treatment: A Randomized Controlled Trial.

    Science.gov (United States)

    Licciardone, John C; Gatchel, Robert J; Aryal, Subhash

    2016-03-01

    Little is known about recovery after spinal manipulation in patients with low back pain (LBP). To assess recovery from chronic LBP after a short regimen of osteopathic manipulative treatment (OMT) in a responder analysis of the OSTEOPAThic Health outcomes In Chronic low back pain (OSTEOPATHIC) Trial. A randomized double-blind, sham-controlled trial was conducted to determine the efficacy of 6 OMT sessions over 8 weeks. Recovery was assessed at week 12 using a composite measure of pain recovery (10 mm or less on a 100-mm visual analog scale) and functional recovery (2 or less on the Roland-Morris Disability Questionnaire for back-specific functioning). The RRs and numbers-needed-to-treat (NNTs) for recovery with OMT were measured, and corresponding cumulative distribution functions were plotted according to baseline LBP intensity and back-specific functioning. Multiple logistic regression was used to compute the OR for recovery with OMT while simultaneously controlling for potential confounders. Sensitivity analyses were performed to corroborate the primary results. There were 345 patients who met neither of the recovery criteria at baseline in the primary analyses and 433 patients who met neither or only 1 of these criteria in the sensitivity analyses. There was a large treatment effect for recovery with OMT (RR, 2.36; 95% CI, 1.31-4.24; P=.003), which was associated with a clinically relevant NNT (8.9; 95% CI, 5.4-25.5). This significant finding persisted after adjustment for potential confounders (OR, 2.92; 95% CI, 1.43-5.97; P=.003). There was also a significant interaction effect between OMT and comorbid depression (P=.02), indicating that patients without depression were more likely to recover from chronic LBP with OMT (RR, 3.21; 95% CI, 1.59-6.50; Pback-specific dysfunction at baseline. Similar results were observed in the sensitivity analyses. The OMT regimen was associated with significant and clinically relevant measures for recovery from chronic LBP. A

  5. Recovery of Mn as MnO2 from spent batteries leaching solutions

    Directory of Open Access Journals (Sweden)

    Manciulea A. L.

    2013-04-01

    Full Text Available The recycling of spent batteries and recovery of metals from them is of great scientific and economic interest, on account of recycling requirement of these wastes and recovery of valuable materials (De Michellis et al., 2007. Usage of recycled materials is diminishing the energy consumption and pollution. It is important that the recycling process to be environmentally friendly, practical and cost-effective. Tests for the process of manganese removal from spent battery leaching solutions, with ammonium peroxodisulfate, prior to recovery of zinc by electrolysis are presented. The experiments were carried out according to a 23 full factorial design as a function of ammonium peroxodisulfate concentration, temperature and pH. Because the excessive manganese in the spent batteries leach solutions can cause problems in the process of Zn recovery by electrolysis the main focus of this study is the manganese removal without altering the concentration of zinc in solutions. Data from XRF and AAS during the reaction at different time are presented. Manganese is obtained with high extraction degree as MnO2, which is economic and commercial important with applications in battery industry, water treatment plants, steel industry and chemicals (Pagnanelli et al., 2007. The analysis of variance (ANOVA was carried out on the extraction yields of Zn after 30min, 1h, 2h and 3h of reaction. The preliminary results denoted that by chemical oxidation with ammonium peroxodisulfate is a suitable method for manganese removal as MnO2 prior zinc recovery by electrolysis, from spent batteries solutions and it could be used in a plant for recycling batteries.

  6. Pilot test of pollution control and metal resource recovery for acid mine drainage.

    Science.gov (United States)

    Yan, Bo; Mai, Ge; Chen, Tao; Lei, Chang; Xiao, Xianming

    2015-01-01

    The study was undertaken in order to recover the metal resources from acid mine drainage (AMD). A 300 m(3)/d continuous system was designed and fractional precipitation technology employed for the main metals Fe, Cu, Zn, and Mn recovery. The system was operated for six months using actual AMD in situ. The chemicals' input and also the retention time was optimized. Furthermore, the material balance was investigated. With the system, the heavy metals of the effluent after the Mn neutralization precipitation were below the threshold value of the Chinese integrated wastewater discharge limit. The precipitates generated contained 42%, 12%, 31%, and 18% for Fe, Cu, Zn, and Mn, respectively, and the recovery rates of Fe, Cu, Zn, and Mn were 82%, 79%, 83%, and 83%, respectively. The yield range of the precipitate had significant correlation with the influent metal content. Using the X-ray diffraction analysis, the refinement for Fe, Cu, and Zn could be achieved through the processes of roasting and floatation. Cost-benefit was also discussed; the benefit from the recycled metal was able to pay for the cost of chemical reagents used. Most important of all, through the use of this technology, the frustrating sludge problems were solved.

  7. Energetic and exergetic analysis of waste heat recovery systems in the cement industry

    International Nuclear Information System (INIS)

    Karellas, S.; Leontaritis, A.-D.; Panousis, G.; Bellos, E.; Kakaras, E.

    2013-01-01

    In a typical cement producing procedure, 25% of the total energy used is electricity and 75% is thermal energy. However, the process is characterized by significant heat losses mainly by the flue gases and the ambient air stream used for cooling down the clinker (about 35%–40% of the process heat loss). Approximately 26% of the heat input to the system is lost due to dust, clinker discharge, radiation and convection losses from the kiln and the preheaters. A heat recovery system could be used to increase the efficiency of the cement plant and thus contribute to emissions decrease. The aim of this paper is to examine and compare energetically and exergetically, two different WHR (waste heat recovery) methods: a water-steam Rankine cycle, and an Organic Rankine Cycle (ORC). A parametric study proved that the water steam technology is more efficient than ORC in exhaust gases temperature higher than 310 °C. Finally a brief economic assessment of the most efficient solution was implemented. WHR installations in cement industry can contribute significantly in the reduction of the electrical consumptions operating cost thus being a very attractive investment with a payback period up to 5 years. - Highlights: • This paper presents waste heat recovery as a way to gain energy from the exhaust gases in a cement plant. • Water steam cycle and ORC has been analyzed for waste heat recovery. • The energetic and exergetic evaluation of the two waste heat recovery processes is presented and compared

  8. An autonomous recovery mechanism against optical distribution network failures in EPON

    Science.gov (United States)

    Liem, Andrew Tanny; Hwang, I.-Shyan; Nikoukar, AliAkbar

    2014-10-01

    Ethernet Passive Optical Network (EPON) is chosen for servicing diverse applications with higher bandwidth and Quality-of-Service (QoS), starting from Fiber-To-The-Home (FTTH), FTTB (business/building) and FTTO (office). Typically, a single OLT can provide services to both residential and business customers on the same Optical Line Terminal (OLT) port; thus, any failures in the system will cause a great loss for both network operators and customers. Network operators are looking for low-cost and high service availability mechanisms that focus on the failures that occur within the drop fiber section because the majority of faults are in this particular section. Therefore, in this paper, we propose an autonomous recovery mechanism that provides protection and recovery against Drop Distribution Fiber (DDF) link faults or transceiver failure at the ONU(s) in EPON systems. In the proposed mechanism, the ONU can automatically detect any signal anomalies in the physical layer or transceiver failure, switching the working line to the protection line and sending the critical event alarm to OLT via its neighbor. Each ONU has a protection line, which is connected to the nearest neighbor ONU, and therefore, when failure occurs, the ONU can still transmit and receive data via the neighbor ONU. Lastly, the Fault Dynamic Bandwidth Allocation for recovery mechanism is presented. Simulation results show that our proposed autonomous recovery mechanism is able to maintain the overall QoS performance in terms of mean packet delay, system throughput, packet loss and EF jitter.

  9. Course of Recovery from Alcoholism

    Science.gov (United States)

    Venner, Kamilla L.; Matzger, Helen; Forcehimes, Alyssa A.; Moos, Rudolf H.; Feldstein, Sarah W.; Willenbring, Mark L.; Weisner, Constance

    2010-01-01

    This article represents the proceedings of a symposium at the 2005 Research Society on Alcoholism meeting in Santa Barbara, California, organized and chaired by Kamilla L. Venner. This symposium integrated current empirical research on the course of recovery from alcoholism from multiple perspectives, an aim that is consistent with NIAAA's new focus on the process of recovery. The presentations and presenters were as follows: (1) The Role of Community Services and Informal Support on 7-Year Drinking Outcomes in Treated and Untreated Drinkers, by Helen Matzger; (2) The Sequence of Recovery Events in a Native American Sample, by Kamilla L. Venner; (3) Transformational Change in Recovery, by Alyssa A. Forcehimes; (4) Social Settings and Substance Use: Contextual Factors in Recovery, by Rudolf H. Moos; and (5) A Broader View of Change in Drinking Behavior, by discussant Mark L. Willenbring. A theme connecting the presentations was that treatment is but one discrete aspect to recovery and that sustained recovery is often influenced by an individual interaction with others within a social context. Collectively, presentations underscored the need to think more broadly about factors contributing to the remission of alcohol dependence. PMID:16737468

  10. Platinum catalysts recovery of the proton exchange membrane fuel cell; Recuperacao de catalisadores de platina da celula a combustibel de membrana polimerica trocadora de protons

    Energy Technology Data Exchange (ETDEWEB)

    Fukurozaki, S.H.; Seo, E.S.M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais. Lab. de Processamento de Residuos

    2006-07-01

    Currently, platinum is the most feasible catalyst for the Proton Exchange Membrane Fuel Cells - PEMFC. Along with platinum's significant importance in this energy system are the high cost of this noble metal and its detrimental effects on the environment. Therefore, recycling this material seems as an alternative to decrease its impacts on the environment and, at the same time, to provide a reduction of the system's costs. A search was conducted for literature and studies about platinum recycling methods. However, only two techniques of platinum recovery, which are still in development, were found. In face of this situation, a recovery method of platinum from deactivated Membrane Electrode Assembly - MEA's was developed, with attention to aspects related to the environment and the necessary requirements for its primary recycling. The results found showed a high recovery ratio and a possibility to reintroduce this metal into the production cycle. (author)

  11. Numerical approach for enhanced oil recovery with surfactant flooding

    Directory of Open Access Journals (Sweden)

    Sadegh Keshtkar

    2016-03-01

    Full Text Available The remained oil in the reservoir after conventional water-flooding processes, forms a dispersed phase in the form of oil drops which is trapped by capillary forces and is almost about 70% of the original oil in the place (OOIP. To reduce oil residual saturation in laboratory experiments and field projects, surfactant flooding is effective via decreasing the interfacial tension mobility ratio between oil and water phases. Estimation of the role of design variables, like chemical concentrations, partition coefficient and injection rate in different performance quantities, considering a heterogeneous and multiphase oil reservoir is a critical stage for optimal design. Increasing demand for oil production from water-flooded reservoirs has caused an increasing interest in surfactant-polymer (SP and alkali-surfactant-polymer (ASP. Modeling minimizes the risk of high cost of chemicals by improving our insight of process. In the present paper, a surfactant compositional flood model for a three-component (water, petroleum and surfactant, two phase (aqueous and oleic system is studied. A homogeneous, two-dimensional, isothermal reservoir with no free gas or alkali is assumed. The governing equations are in three categories: the continuity equations for the transport of each component, Darcy's equation for the transport of each phase and other auxiliary equations. The equations are solved by finite-differences using a procedure implicit in pressure and explicit in saturation. The validation of the model is achieved through comparing the modeling results with CMG simulators and Buckley–Leverett theory. The results of modeling showed good agreement with CMG results, and the comparison with Buckley–Leverett theory is explained according to different assumptions. After validation of the model, in order to investigate sensitivity analysis, the effects of system variables (partition coefficient, surface tension, oil viscosity and surface injection

  12. Diaries for recovery from critical illness.

    Science.gov (United States)

    Ullman, Amanda J; Aitken, Leanne M; Rattray, Janice; Kenardy, Justin; Le Brocque, Robyne; MacGillivray, Stephen; Hull, Alastair M

    2014-12-09

    During intensive care unit (ICU) admission, patients experience extreme physical and psychological stressors, including the abnormal ICU environment. These experiences impact on a patient's recovery from critical illness and may result in both physical and psychological disorders. One strategy that has been developed and implemented by clinical staff to treat the psychological distress prevalent in ICU survivors is the use of patient diaries. These provide a background to the cause of the patient's ICU admission and an ongoing narrative outlining day-to-day activities. To assess the effect of a diary versus no diary on patients, and their caregivers or families, during the patient's recovery from admission to an ICU. We searched the Cochrane Central Register of Controlled Trials (CENTRAL; 2014, Issue 1), Ovid MEDLINE (1950 to January 2014), EBSCOhost CINAHL (1982 to January 2014), Ovid EMBASE (1980 to January 2014), PsycINFO (1950 to January 2014), Published International Literature on Traumatic Stress (PILOTS) database (1971 to January 2014); Web of Science Conference Proceedings Citation Index - Science and Social Science and Humanities (1990 to January 2014); seven clinical trial registries and reference lists of identified trials. We applied no language restriction. We included randomized controlled trials (RCTs) or clinical controlled trials (CCTs) that evaluated the effectiveness of patient diaries, when compared to no ICU diary, for patients or family members to promote recovery after admission to ICU. Outcome measures for describing recovery from ICU included the risk of post-traumatic stress disorder (PTSD), anxiety, depression and post-traumatic stress symptomatology, health-related quality of life and costs. We used standard methodological approaches as expected by The Cochrane Collaboration. Two review authors independently reviewed titles for inclusion, extracted data and undertook risk of bias according to prespecified criteria. We identified three

  13. Design and implementation of a cost-effective microscope for fabrication and imaging

    International Nuclear Information System (INIS)

    Trout, G; Basu, S

    2009-01-01

    The use of lasers and optical systems for advanced research and demonstrative purposes has traditionally been cost-prohibitive for many researchers. In this note, we present the design and optimization of a low-cost microscopy setup capable of imaging, fabrication or photopolymerization via multiphoton excitation of a photoactivator and the study of processes such as diffusion using fluorescence recovery after photobleaching (FRAP). The setup features a continuous wave (CW) Ar-ion laser, a pulsed Nd 3+ :YAG laser, an inverted microscope with a CCD camera and appropriate optics. The setup is cost-effective and puts a once-expensive setup within reach of more researchers interested in micron- and sub-micron-scale processes. (technical design note)

  14. The long read t recovery: treatment outcome and cost among adolescents treated for anorexia nervosa in specialized care.

    Science.gov (United States)

    Silén, Yasmina; Raevuori, Anu; Sipilä, Pyry; Jüriloo, Elisabeth; Tainio, Veli-Matti; Marttunen, Mauri; Keski-Rahkonen, Anna

    We investigated factors affecting treatment outcome and cost of treatment among adolescents treated for anorexia nervosa in specialized care. Records of 47 patients with anorexia nervosa treated at the adolescent eating disorder unit were reviewed retrospectively. Individual differences in the need for treatment and cost of treatment were considerable. Nearly one third of patients required treatment at multiple wards in addition to outpatient care. The majority of costs (76%) incurred from treating a minority (29 %) of patients. Psychiatric comorbidity, particularly depression, was associated with a greater need for treatment and higher costs. The cost of treatment of anorexia nervosa is considerable, but many of those requiring intensive treatment have a favorable outcome.

  15. From Consumption to Prosumption - Operational Cost Optimization for Refrigeration System With Heat Waste Recovery

    DEFF Research Database (Denmark)

    Minko, Tomasz; Garcia, Jesus Lago; Bendtsen, Jan Dimon

    2017-01-01

    Implementation of liquid cooling transforms a refrigeration system into a combined cooling and heating system. Reclaimed heat can be used for building heating purposes or can be sold. Carbon dioxide based refrigeration systems are considered to have a particularly high potential for becoming ecient...... heat energy producers. In this paper a CO2 system that operates in the subcritical region is examined. Modelling approach is presented, and used for operation optimisation by way of non-linear model predictive control techniques. Assuming that the heat is sold when using both objective functions......, it turns out that the system have negative operational cost. In case when Cost Minimization objective function is used daily revenue is about 7:9 [eur], for Prosumption one it is 11:9 [eur]....

  16. Heat recovery properties from fuel cell system for telecommunications use; Tsushin`yo nenryo denchi system ni okeru hainetsu kaishu tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Ishizawa, M.; Iida, S.; Abe, I.; Yamamoto, M. [NTT Integrated Information and Energy Systems Laboratories, Tokyo (Japan)

    1997-08-20

    NTT is developing a phosphoric-acid fuel-cell energy system for telecommunication co-generation systems to reduce energy costs and help preserve the environment. Fuel cells are used to provide electrical power to telecommunication equipment and the heat energy that is generated is used by the absorption refrigerators to cool the telecommunication rooms throughout the year. We field-tested this fuel-cell energy system in a telephone office. Two heat recovery methods were applied in the test: one uses direct steam heat recovery from fuel-cell stack coolant to keep the heat recovery temperature high and to avoid requiring a heat exchanger for the recovery; the other uses heat recovery from the reformer exhaust gas that is directly in contact with the heat recovery water to recover heat more economically. Our field tests confirmed that the average efficiency of heat recovery from fuel-cell stack coolant is 16%, and from the reformer exhaust gas is 9% under 80-kW continuous operation. Maximum total efficiency including electrical power efficiency was confirmed to be about 73% under the condition of 100-kW and an S/C ratio of 2.5 in the winter period: heat recovery from the fuel-cell stack coolant was 23%, from the reformer exhaust gas was 10%, and from electrical conversion was about 40%. 9 refs., 12 figs., 1 tab.

  17. Defining recovery in adult bulimia nervosa.

    Science.gov (United States)

    Yu, Jessica; Agras, W Stewart; Bryson, Susan

    2013-01-01

    To examine how different definitions of recovery lead to varying rates of recovery, maintenance of recovery, and relapse in bulimia nervosa (BN), end-of-treatment (EOT) and follow-up data were obtained from 96 adults with BN. Combining behavioral, physical, and psychological criteria led to recovery rates between 15.5% and 34.4% at EOT, though relapse was approximately 50%. Combining these criteria and requiring abstinence from binge eating and purging when defining recovery may lead to lower recovery rates than those found in previous studies; however, a strength of this definition is that individuals who meet this criteria have no remaining disordered behaviors or symptoms.

  18. Probabilistic accident sequence recovery analysis

    International Nuclear Information System (INIS)

    Stutzke, Martin A.; Cooper, Susan E.

    2004-01-01

    Recovery analysis is a method that considers alternative strategies for preventing accidents in nuclear power plants during probabilistic risk assessment (PRA). Consideration of possible recovery actions in PRAs has been controversial, and there seems to be a widely held belief among PRA practitioners, utility staff, plant operators, and regulators that the results of recovery analysis should be skeptically viewed. This paper provides a framework for discussing recovery strategies, thus lending credibility to the process and enhancing regulatory acceptance of PRA results and conclusions. (author)

  19. Overview of Fuel Resources Program – Seawater Uranium Recovery Sponsored by the U.S. Department of Energy

    International Nuclear Information System (INIS)

    Kung, Stephen; Britt, Phillip F.; Gill, Gary A.; Schneider, Erich

    2014-01-01

    Investment strategy: To develop advanced adsorbents that can simultaneously enhance U sorption capacity, selectivity, kinetics, and materials durability to reduce the technology cost and uncertainties; Program goals: To develop lab-scale uranium recovery technology demonstration under marine conditions, and to work with potential commercial/industry partner(s) to establish technolog pricing threshhold

  20. Experimental and numerical modeling of heavy-oil recovery by electrical heating

    Energy Technology Data Exchange (ETDEWEB)

    Hascakir, B.; Akin, S. [Middle East Technical Univ., Ankara (Turkey); Babadagli, T. [Alberta Univ., Edmonton, AB (Canada)

    2008-10-15

    This study examined the applicability of electrical heating as a heavy oil recovery system in 2 heavy oil fields in Turkey. The physical and chemical properties of samples from the 2 fields were compiled and measured. The samples were then subjected to electrical heating. A retort technique was used to determine oil recovery performance under various conditions. Different types of iron powders were also applied in order to reduce oil viscosity. In situ viscosity reduction levels during the heating process were measured using a history matching procedure that considered data obtained during the laboratory experiments. The study demonstrated that the addition of iron power to the oil samples caused the polar components of the oil to decrease. Oil viscosity was strongly influenced by the magnetic fields created by the iron powders. An analysis of the experimental data showed that significant viscosity reductions of 88 per cent were obtained for the samples when iron additions of 0.5 per cent were used. Data from the experiments were used to develop mathematical models in order to consider thermal diffusion coefficients, oil viscosity, and relative permeability parameters. It was concluded that the cost of producing 1 barrel of oil using the method cost approximately US $5. After a period of 70 days, 320 barrels of petroleum were produced using the method. Oil production rates increased to 440 barrels over the same time period when iron additions were used. 30 refs., 6 tabs., 12 figs.