Consideration concerning the costs of the 300 kW wind units developed in Romania

Energy Technology Data Exchange (ETDEWEB)

Gyulai, F.; Bej, A. [Technical Univ. of Timisoara (Romania). Wind Energy Research Center

1995-12-31

A demonstrative wind farm with four research units, 300 kW each, is in developing stage in Romania. The article shows economic analysis of these experimental wind units and their cost structure focusing in component costs, performance, manufacturing technology and installing work. (author)

No clear Y2K roadmap can be costly; may create serious liability.

Science.gov (United States)

1998-12-01

Hospitals without Year 2000 plans in place could be setting themselves up for costly equipment failure. Learn what the experts say about prioritizing to ensure patient care isn't disrupted, and find out about testing medical devices and equipment for Y2K compliance, and what to consider when setting up a Y2K analysis program in your hospital, including how to ensure vendors tell you the truth about whether their products are Y2K compliant.

12 CFR Appendix K to Part 226 - Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions

Science.gov (United States)

2010-01-01

... Appendix K to Part 226—Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions (a... loan cost rate for various transactions, as well as instructions, explanations, and examples for.... (2) Term of the transaction. For purposes of total annual loan cost disclosures, the term of a...

Cost of privacy rules could dwarf Y2K, experts say.

Science.gov (United States)

2000-03-01

It may not have generated the media hype that the Y2K computer bug did, but the Health Insurance Portability and Accountability Act could end up costing hospitals several times as much. The brunt of the expense is likely to come from the law's privacy standards, which experts say are so broad and complex that simply understanding which parts apply to your facility could represent a major undertaking.

Cost of illness of oral lichen planus in a U.K. population--a pilot study.

Science.gov (United States)

Ni Riordain, Richeal; Christou, Joanna; Pinder, Denise; Squires, Vanessa; Hodgson, Tim

2016-05-01

To assess the economic burden of oral lichen planus (OLP) from the perspective of the healthcare provider in a U.K. population. This prevalence-based cost-of-illness analysis was carried out via a cross-sectional study conducted in the Oral Medicine Unit of the Eastman Dental Hospital. This study was conducted in three phases - phase 1 involved framing of the cost-of-illness analysis, development of the cost inventory and design of the patient questionnaire for ease of data collection. Data collected from patients were inputted during phase 2, and costings were determined. The final phase consisted of the calculation of the cost of illness of OLP. One hundred patients were enrolled in the study, 30 males and 70 females, with an average age of 59.9 years (±13.4 years). The average OLP patient, based on our cohort, attends the oral medicine unit 2.64 times per year, their general medical practitioner 1.13 times annually, their general dental practitioner 0.82 times in a year and fills on average 3.37 prescriptions annually. This leads to an average annual cost of £398.58 (€541.16) per patient per year from the perspective of the healthcare provider. The annual average cost of OLP to the healthcare provider in the U.K. is substantial. The prevalence-based cost-of-illness data generated in this study will facilitate comparison with other chronic oral mucosal diseases and with chronic diseases managed in allied medical specialties. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A U.K. cost-benefit analysis of circles of support and accountability interventions.

Science.gov (United States)

Elliott, Ian A; Beech, Anthony R

2013-06-01

Circles of Support and Accountability (CoSA) aim to augment sex offender risk management at the point of community reentry by facilitating "Circles" of volunteers who provide support, guidance, and advice, while ensuring that the offender remains accountable for their actions. In this study, the authors provide (a) a rapid evidence assessment of the effectiveness of CoSA in reducing reoffending, and (b) a U.K. cost-benefit analysis for CoSA when compared to the criminal justice costs of reoffending. From the study analysis, the average cost of a "Circle" was estimated to be £11,303 per annum and appears to produce a 50% reduction in reoffending (sexual and nonsexual), as the estimated cost of reoffending was estimated to be £147,161 per offender, per annum. Based on a hypothetical cohort of 100 offenders--50 of whom receive CoSA and 50 of whom do not--investment in CoSA appears to provide a cost saving of £23,494 and a benefit-cost ratio of 1.04. Accounting for estimates that the full extent of the cost to society may be 5 to 10 times the tangible costs substantially increases estimated cost savings related to CoSA.

A Benefit-Cost Analysis of the Tulsa Universal Pre-K Program. Upjohn Institute Working Paper 16-261

Science.gov (United States)

Bartik, Timothy J.; Belford, Jonathan A.; Gormley, William T.; Anderson, Sara

2016-01-01

In this paper, benefits and costs are estimated for a universal pre-K program, provided by Tulsa Public Schools. Benefits are derived from estimated effects of Tulsa pre-K on retention by grade 9. Retention effects are projected to dollar benefits from future earnings increases and crime reductions. Based on these estimates, Tulsa pre-K has…

Cost of vitamin K antagonist anticoagulant treatment in patients with metallic prosthetic valve in mitral position.

Science.gov (United States)

Ene, Gabriela; Garcia Raso, Aránzazu; Gonzalez-Dominguez Weber, Almudena; Hidalgo-Vega, Álvaro; Llamas, Pilar

2016-01-01

The initiation of oral anticoagulation therapy after valve replacement surgery requires strict monitoring because these patients are at high risk for the development of thrombotic complications and present an increased risk of bleeding. The aim of this study was to examine the total healthcare costs of oral anticoagulant treatment with vitamin K antagonists in patients with metallic prosthetic valves in the mitral position. Data from clinical records were used in the study including international normalized ratio results, number of medical visits, type of anticoagulant, use of rescue medication and hospital admissions from related complications. The drug cost was calculated based on the official Spanish Ministry of Health price list. Monitoring expenses were included in the cost of the medical supplies used in the procedures. Hospitalization costs were calculated using the diagnosis-related group price for each case. We collected data from 151 patients receiving oral anticoagulation therapy with vitamin K antagonist who were diagnosed with mitral prosthesis (n = 90), mitro-aortic prosthesis (n = 57), and mitral and tricuspid prosthesis (n = 4). The total direct healthcare cost was €15302.59, with a mean total cost per patient per year of €1558.15 (±2774.58) consisting of 44.38 (±42.30) for drug cost, €71.41 (±21.43) for international normalized ratio monitoring, €429.52 (±126.87) for medical visits, €26.31 (±28.38) for rescue medication and €986.53 (±2735.68) for related complications. Most direct healthcare costs associated with the sampled patients arose from the specialist-care monitoring required for treatment. Good monitoring is inversely related to direct healthcare costs.

Design and cost analysis of 1 kW photovoltaic system based on actual performance in Indian scenario

Directory of Open Access Journals (Sweden)

Shahzad Ahsan

2016-09-01

Full Text Available The exhaustion of conventional resources and its effect on climate requires an urgent call for the substitute power resources to convene up the current power requirement. Solar energy is an endless, unsoiled and prospective energy source among all other nonconventional energy options. As more concentration is being done on focal point for the development of renewable energy capital globally. To ascertain their viability it is necessary to do the economic and technical assessments of these resources. This paper presents designing aspects and assessments of solar PV system based on field and actual performance. The study is based on design of solar PV system and a case study based on cost analysis of 1.0 kW off-grid photovoltaic energy system installed at Jamia Millia Islamia, New Delhi (28.5616° N, 77.2802° E, and about 293 m above sea level India. Both monthly and weekly costs of energy produced by the 1 kW PV system have been calculated. In addition, the solar PV 1 kW system can give internal rate of return of about 1.714% on investment. Based on assumptions used in this study, solar 1 kW PV system of Rs. 0.9724/kWh is estimated for a project with profitable life of 25 years with no other financial support. This translates to Rs. 80,000 payment over the livelier cost of energy of 1 kWh generated by the system. However, if the financial support is more than 50% of the initial investment cost, no further payment fee is necessary to support this type of system. Basically this system has been designed for small home located at the place of availability of grid power is rare. 1 kW PV solar system is also very useful in rural areas of India. India as a subcontinent receives great amounts of solar radiation annually.

Simulating water markets with transaction costs

Science.gov (United States)

Erfani, Tohid; Binions, Olga; Harou, Julien J.

2014-06-01

This paper presents an optimization model to simulate short-term pair-wise spot-market trading of surface water abstraction licenses (water rights). The approach uses a node-arc multicommodity formulation that tracks individual supplier-receiver transactions in a water resource network. This enables accounting for transaction costs between individual buyer-seller pairs and abstractor-specific rules and behaviors using constraints. Trades are driven by economic demand curves that represent each abstractor's time-varying water demand. The purpose of the proposed model is to assess potential hydrologic and economic outcomes of water markets and aid policy makers in designing water market regulations. The model is applied to the Great Ouse River basin in Eastern England. The model assesses the potential weekly water trades and abstractions that could occur in a normal and a dry year. Four sectors (public water supply, energy, agriculture, and industrial) are included in the 94 active licensed water diversions. Each license's unique environmental restrictions are represented and weekly economic water demand curves are estimated. Rules encoded as constraints represent current water management realities and plausible stakeholder-informed water market behaviors. Results show buyers favor sellers who can supply large volumes to minimize transactions. The energy plant cooling and agricultural licenses, often restricted from obtaining water at times when it generates benefits, benefit most from trades. Assumptions and model limitations are discussed. This article was corrected on 13 JUN 2014. See the end of the full text for details.

Cost of vitamin K antagonist anticoagulant treatment in patients with metallic prosthetic valve in mitral position

Directory of Open Access Journals (Sweden)

Gabriela Ene

2016-08-01

Full Text Available Background: The initiation of oral anticoagulation therapy after valve replacement surgery requires strict monitoring because these patients are at high risk for the development of thrombotic complications and present an increased risk of bleeding. Objectives: The aim of this study was to examine the total healthcare costs of oral anticoagulant treatment with vitamin K antagonists in patients with metallic prosthetic valves in the mitral position. Methods: Data from clinical records were used in the study including international normalized ratio results, number of medical visits, type of anticoagulant, use of rescue medication and hospital admissions from related complications. The drug cost was calculated based on the official Spanish Ministry of Health price list. Monitoring expenses were included in the cost of the medical supplies used in the procedures. Hospitalization costs were calculated using the diagnosis-related group price for each case. Results: We collected data from 151 patients receiving oral anticoagulation therapy with vitamin K antagonist who were diagnosed with mitral prosthesis (n = 90, mitro-aortic prosthesis (n = 57, and mitral and tricuspid prosthesis (n = 4. The total direct healthcare cost was €15302.59, with a mean total cost per patient per year of €1558.15 (±2774.58 consisting of 44.38 (±42.30 for drug cost, €71.41 (±21.43 for international normalized ratio monitoring, €429.52 (±126.87 for medical visits, €26.31 (±28.38 for rescue medication and €986.53 (±2735.68 for related complications. Conclusion: Most direct healthcare costs associated with the sampled patients arose from the specialist-care monitoring required for treatment. Good monitoring is inversely related to direct healthcare costs.

Determining the k in k-means with MapReduce

OpenAIRE

Debatty , Thibault; Michiardi , Pietro; Mees , Wim; Thonnard , Olivier

2014-01-01

International audience; In this paper we propose a MapReduce implementation of G-means, a variant of k-means that is able to automatically determine k, the number of clusters. We show that our implementation scales to very large datasets and very large values of k, as the computation cost is proportional to nk. Other techniques that run a clustering algorithm with different values of k and choose the value of k that provides the " best " results have a computation cost that is proportional to...

Photovoltaic energy cost limit

International Nuclear Information System (INIS)

Coiante, D.

1992-01-01

Referring to a photovoltaic system for grid connected applications, a parametric expression of kWh cost is derived. The limit of kWh cost is carried out extrapolating the values of cost components to their lowest figure. The reliability of the forecast is checked by disaggregating kWh cost in direct and indirect costs and by discussing the possible cost reduction of each component

Strategic closed-loop facility location problem with carbon market trading

DEFF Research Database (Denmark)

Diabat, A.; Abdallah, T.; Al-Refaie, A.

2013-01-01

and recovery of products in a closed-loop configuration. Remanufacturing is the basis of profit-oriented reverse logistics in which recovered products are restored to a marketable condition in order to be resold to the primary or secondary market. In this paper, we introduce a multiechelon multicommodity...... facility location problem with a trading price of carbon emissions and a cost of procurement. The company might either incur costs if the carbon cap, normally assigned by regulatory agencies, is lower than the total emissions, or gain profit if the carbon cap is higher than the total emissions. A numerical...

K-AP: Generating specified K clusters by efficient Affinity Propagation

KAUST Repository

Zhang, Xiangliang; Wang, Wei; Nø rvå g, Kjetil; Sebag, Michè le

2010-01-01

and experimental validation, K-AP was shown to be able to directly generate K clusters as user defined, with a negligible increase of computational cost compared to AP. In the meanwhile, K-AP preserves the clustering quality as AP in terms of the distortion. K

A matheuristic for the liner shipping network design problem

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Desaulniers, Guy

2012-01-01

for revenue and transshipment of cargo along with in/decrease of vessel- and operational cost for the current solution. The evaluation functions may be used by heuristics in general to evaluate changes to a network design without solving a large scale multicommodity flow problem.......We present a matheuristic, an integer programming based heuristic, for the Liner Shipping Network Design Problem. The heuristic applies a greedy construction heuristic based on an interpretation of the liner shipping network design problem as a multiple quadratic knapsack problem. The construction...

Selecting and Ranking Cost Research Projects

Science.gov (United States)

1993-09-01

Model (STACM) Enhancements Automated Cost Estimating Integrated Tools ( ACEIT ) Libraries BM/C 3 GEP Engineering and Cost BM/C 3 EP Engineering and Cost...50K NOM VHI 0.02635481 STACM ENHANCEMENTS NOM អK NOM VHI 0.02468682 ACEIT LIBRARIES VHI 50-IOOK HI VHI 0.06357704 GEP ENGRG. & COST VHI 100-150K VHl...0.02505922 SCATS LOW អK NOM VIII 0.02468682 PICES SUPPORT NOM 50-100K NOM VlIl 0.02455186 ACEIT SUPPORT VIII 50-100K VHI VHI 0.08208244 GUARDIAN

Retrospective cost adaptive Reynolds-averaged Navier-Stokes k-ω model for data-driven unsteady turbulent simulations

Science.gov (United States)

Li, Zhiyong; Hoagg, Jesse B.; Martin, Alexandre; Bailey, Sean C. C.

2018-03-01

This paper presents a data-driven computational model for simulating unsteady turbulent flows, where sparse measurement data is available. The model uses the retrospective cost adaptation (RCA) algorithm to automatically adjust the closure coefficients of the Reynolds-averaged Navier-Stokes (RANS) k- ω turbulence equations to improve agreement between the simulated flow and the measurements. The RCA-RANS k- ω model is verified for steady flow using a pipe-flow test case and for unsteady flow using a surface-mounted-cube test case. Measurements used for adaptation of the verification cases are obtained from baseline simulations with known closure coefficients. These verification test cases demonstrate that the RCA-RANS k- ω model can successfully adapt the closure coefficients to improve agreement between the simulated flow field and a set of sparse flow-field measurements. Furthermore, the RCA-RANS k- ω model improves agreement between the simulated flow and the baseline flow at locations at which measurements do not exist. The RCA-RANS k- ω model is also validated with experimental data from 2 test cases: steady pipe flow, and unsteady flow past a square cylinder. In both test cases, the adaptation improves agreement with experimental data in comparison to the results from a non-adaptive RANS k- ω model that uses the standard values of the k- ω closure coefficients. For the steady pipe flow, adaptation is driven by mean stream-wise velocity measurements at 24 locations along the pipe radius. The RCA-RANS k- ω model reduces the average velocity error at these locations by over 35%. For the unsteady flow over a square cylinder, adaptation is driven by time-varying surface pressure measurements at 2 locations on the square cylinder. The RCA-RANS k- ω model reduces the average surface-pressure error at these locations by 88.8%.

K-AP: Generating specified K clusters by efficient Affinity Propagation

KAUST Repository

Zhang, Xiangliang

2010-12-01

The Affinity Propagation (AP) clustering algorithm proposed by Frey and Dueck (2007) provides an understandable, nearly optimal summary of a data set. However, it suffers two major shortcomings: i) the number of clusters is vague with the user-defined parameter called self-confidence, and ii) the quadratic computational complexity. When aiming at a given number of clusters due to prior knowledge, AP has to be launched many times until an appropriate setting of self-confidence is found. The re-launched AP increases the computational cost by one order of magnitude. In this paper, we propose an algorithm, called K-AP, to exploit the immediate results of K clusters by introducing a constraint in the process of message passing. Through theoretical analysis and experimental validation, K-AP was shown to be able to directly generate K clusters as user defined, with a negligible increase of computational cost compared to AP. In the meanwhile, K-AP preserves the clustering quality as AP in terms of the distortion. K-AP is more effective than k-medoids w.r.t. the distortion minimization and higher clustering purity. © 2010 IEEE.

Cost estimate of electricity produced by TPV

Science.gov (United States)

Palfinger, Günther; Bitnar, Bernd; Durisch, Wilhelm; Mayor, Jean-Claude; Grützmacher, Detlev; Gobrecht, Jens

2003-05-01

A crucial parameter for the market penetration of TPV is its electricity production cost. In this work a detailed cost estimate is performed for a Si photocell based TPV system, which was developed for electrically self-powered operation of a domestic heating system. The results are compared to a rough estimate of cost of electricity for a projected GaSb based system. For the calculation of the price of electricity, a lifetime of 20 years, an interest rate of 4.25% per year and maintenance costs of 1% of the investment are presumed. To determine the production cost of TPV systems with a power of 12-20 kW, the costs of the TPV components and 100 EUR kW-1el,peak for assembly and miscellaneous were estimated. Alternatively, the system cost for the GaSb system was derived from the cost of the photocells and from the assumption that they account for 35% of the total system cost. The calculation was done for four different TPV scenarios which include a Si based prototype system with existing technology (etasys = 1.0%), leading to 3000 EUR kW-1el,peak, an optimized Si based system using conventional, available technology (etasys = 1.5%), leading to 900 EUR kW-1el,peak, a further improved system with future technology (etasys = 5%), leading to 340 EUR kW-1el,peak and a GaSb based system (etasys = 12.3% with recuperator), leading to 1900 EUR kW-1el,peak. Thus, prices of electricity from 6 to 25 EURcents kWh-1el (including gas of about 3.5 EURcents kWh-1) were calculated and compared with those of fuel cells (31 EURcents kWh-1) and gas engines (23 EURcents kWh-1).

Design, performance, and economics of 50-kW and 500-kW vertical axis wind turbines

Science.gov (United States)

Schienbein, L. A.; Malcolm, D. J.

1983-11-01

A review of the development and performance of the DAF Indal 50-kW vertical axis Darrieus wind turbine shows that a high level of technical development and reliability has been achieved. Features of the drive train, braking and control systems are discussed and performance details are presented. Details are also presented of a 500-kW VAWT that is currently in production. A discussion of the economics of both the 50-kW and 500-kW VAWTs is included, showing the effects of charge rate, installed cost, operating cost, performance, and efficiency.

The costs of nuclear power

International Nuclear Information System (INIS)

Vestenhaug, O.; Sauar, T.O.; Nielsen, P.O.

1979-01-01

A study has been made by Scandpower A/S of the costs of nuclear power in Sweden. It is based on the known costs of existing Swedish nuclear power plants and forecasts of the expected costs of the Swedish nuclear power programme. special emphasis has been put on the fuel cycle costs and future costs of spent fuel processing, waste disposal and decommissioning. Costs are calculated in 1978 Swedish crowns, using the retail price index. An actual interest rate of 4% is used, with depreciation period of 25 years and a plant lifetime of 30 years. Power production costs are estimated to be about 7.7 oere/kWh in 1978, rising to 10.5 oere/kWh in 2000. The cost is distributed with one third each to capital costs, operating costs and fuel costs, the last rising to 40% of the total at the end of the century. The main single factor in future costs is the price of uranium. If desired, Sweden can probably be self-sufficient in uranium in 2000 at a lower cost than assumed here. National research costs which, in Scandpower's opinion, can be debited to the commercial nuclear power programme are about 0.3 oere/kWh. (JIW)

Cost-based droop scheme with lower generation costs for microgrids

DEFF Research Database (Denmark)

Nutkani, Inam Ullah; Loh, Poh Chiang; Blaabjerg, Frede

2014-01-01

-based droop scheme, whose objective is to reduce a generation cost function realised with various DG operating characteristics taken into consideration. Where desired, proportional power sharing based on the DG kVA ratings can also be included, whose disadvantage is a slightly higher generation cost, which...... on the DG kilovolts ampere (kVA) ratings. Other factors like generation costs, efficiencies and emission penalties at different load demands have not been considered. This omission might not be appropriate if different types of DGs are present in the microgrids. As an alternative, this study proposes a cost...... is still lower than that produced by the traditional droop schemes. The proposed droop scheme therefore retains all advantages of the traditional droop schemes, whereas at the same time, keeps its generation cost low. These findings have been validated in experiments....

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 2: Analysis and design

Science.gov (United States)

1976-01-01

All possible overall system configurations, operating modes, and subsystem concepts for a wind turbine configuration for cost effective generation of electrical power were evaluated for both technical feasibility and compatibility with utility networks, as well as for economic attractiveness. A design optimization computer code was developed to determine the cost sensitivity of the various design features, and thus establish the configuration and design conditions that would minimize the generated energy costs. The preliminary designs of both a 500 kW unit and a 1500 kW unit operating in a 12 mph and 18 mph median wind speed respectively, were developed. The various design features and components evaluated are described, and the rationale employed to select the final design configuration is given. All pertinent technical performance data and component cost data is included. The costs of all major subassemblies are estimated and the resultant energy costs for both the 500 kW and 1500 kW units are calculated.

Patterns of Cost for Patients Dying in the Intensive Care Unit and Implications for Cost Savings of Palliative Care Interventions.

Science.gov (United States)

Khandelwal, Nita; Benkeser, David; Coe, Norma B; Engelberg, Ruth A; Teno, Joan M; Curtis, J Randall

2016-11-01

Terminal intensive care unit (ICU) stays represent an important target to increase value of care. To characterize patterns of daily costs of ICU care at the end of life and, based on these patterns, examine the role for palliative care interventions in enhancing value. Secondary analysis of an intervention study to improve quality of care for critically ill patients. 572 patients who died in the ICU between 2003 and 2005 at a Level-1 trauma center. Data were linked with hospital financial records. Costs were categorized into direct fixed, direct variable, and indirect costs. Patterns of daily costs were explored using generalized estimating equations stratified by length of stay, cause of death, ICU type, and insurance status. Estimates from the literature of effects of palliative care interventions on ICU utilization were used to simulate potential cost savings under different time horizons and reimbursement models. Mean cost for a terminal ICU stay was 39.3K ± 45.1K. Direct fixed costs represented 45% of total hospital costs, direct variable costs 20%, and indirect costs 34%. Day of admission was most expensive (mean 9.6K ± 7.6K); average cost for subsequent days was 4.8K ± 3.4K and stable over time and patient characteristics. Terminal ICU stays display consistent cost patterns across patient characteristics. Savings can be realized with interventions that align care with patient preferences, helping to prevent unwanted ICU utilization at end of life. Cost modeling suggests that implications vary depending on time horizon and reimbursement models.

30-kW SEP Spacecraft as Secondary Payloads for Low-Cost Deep Space Science Missions

Science.gov (United States)

Brophy, John R.; Larson, Tim

2013-01-01

The Solar Array System contracts awarded by NASA's Space Technology Mission Directorate are developing solar arrays in the 30 kW to 50 kW power range (beginning of life at 1 AU) that have significantly higher specific powers (W/kg) and much smaller stowed volumes than conventional rigid-panel arrays. The successful development of these solar array technologies has the potential to enable new types of solar electric propulsion (SEP) vehicles and missions. This paper describes a 30-kW electric propulsion vehicle built into an EELV Secondary Payload Adapter (ESPA) ring. The system uses an ESPA ring as the primary structure and packages two 15-kW Megaflex solar array wings, two 14-kW Hall thrusters, a hydrazine Reaction Control Subsystem (RCS), 220 kg of xenon, 26 kg of hydrazine, and an avionics module that contains all of the rest of the spacecraft bus functions and the instrument suite. Direct-drive is used to maximize the propulsion subsystem efficiency and minimize the resulting waste heat and required radiator area. This is critical for packaging a high-power spacecraft into a very small volume. The fully-margined system dry mass would be approximately 1120 kg. This is not a small dry mass for a Discovery-class spacecraft, for example, the Dawn spacecraft dry mass was only about 750 kg. But the Dawn electric propulsion subsystem could process a maximum input power of 2.5 kW, and this spacecraft would process 28 kW, an increase of more than a factor of ten. With direct-drive the specific impulse would be limited to about 2,000 s assuming a nominal solar array output voltage of 300 V. The resulting spacecraft would have a beginning of life acceleration that is more than an order of magnitude greater than the Dawn spacecraft. Since the spacecraft would be built into an ESPA ring it could be launched as a secondary payload to a geosynchronous transfer orbit significantly reducing the launch costs for a planetary spacecraft. The SEP system would perform the escape

Nuclear fuel cycle cost estimation and sensitivity analysis of unit costs on the basis of an equilibrium model

International Nuclear Information System (INIS)

Kim, S. K.; Ko, W. I.; You, S. R.; Gao, R. X.

2015-01-01

This paper examines the difference in the value of the nuclear fuel cycle cost calculated by the deterministic and probabilistic methods on the basis of an equilibrium model. Calculating using the deterministic method, the direct disposal cost and Pyro-SFR (sodium-cooled fast reactor) nuclear fuel cycle cost, including the reactor cost, were found to be 66.41 mills/kWh and 77.82 mills/kWh, respectively (1 mill = one thousand of a dollar, i.e., 10-3 $). This is because the cost of SFR is considerably expensive. Calculating again using the probabilistic method, however, the direct disposal cost and Pyro-SFR nuclear fuel cycle cost, excluding the reactor cost, were found be 7.47 mills/kWh and 6.40 mills/kWh, respectively, on the basis of the most likely value. This is because the nuclear fuel cycle cost is significantly affected by the standard deviation and the mean of the unit cost that includes uncertainty. Thus, it is judged that not only the deterministic method, but also the probabilistic method, would also be necessary to evaluate the nuclear fuel cycle cost. By analyzing the sensitivity of the unit cost in each phase of the nuclear fuel cycle, it was found that the uranium unit price is the most influential factor in determining nuclear fuel cycle costs.

The geothermal KWh cost

International Nuclear Information System (INIS)

Anon.

1995-01-01

Numerous factors can influence the cost of geothermal electricity production: the size and power of production units, the conversion technology used (Rankine cycle or water steam), the resource quality (dry vapor or water-vapor mixing), the resource depth, the drilling activity in the country and the work people costs. In the United States of America the geothermal kWh cost ranges from 2.5 to 8.5 US cents, while in Italy and Nicaragua it ranges from 3 and 10 cents and from 5.7 to 6 cents, respectively. Results of a comparative study of the kWh production cost from different energy sources is also summarized. (J.S.). 1 tab

Design, performance and economics of the DAF Indal 50 kW and 375 kW vertical axis wind turbine

Science.gov (United States)

Schienbein, L. A.; Malcolm, D. J.

1982-03-01

A review of the development and performance of the DAF Indal 50 kW vertical axis Darrieus wind turbines shows that a high level of technical development and reliability has been achieved. Features of the drive train, braking and control systems are discussed and performance details are presented. A description is given of a wind-diesel hybrid presently being tested. Details are also presented of a 375 kW VAWT planned for production in late 1982. A discussion of the economics of both the 50 kW and 375 kW VAWTs is included, showing the effects of charge rate, installed cost, operating cost, performance and efficiency. The energy outputs are translated into diesel fuel cost savings for remote communities.

Half a dollar per kWh and still cheap electricity

International Nuclear Information System (INIS)

Daey Ouwens, C.

1991-01-01

An analysis for the costs of electricity produced by an autonomous solar cell system in combination with efficient electric appliances, as they are used in houses and small offices, is presented. If efficient appliances are used, an average household will use about 700 kWh per year, compared to about 3000 kWh it is using on average at present. Efficient appliances, however, are more expensive. The extra cost per kWh saved is about the same as the cost of the fuel needed to produce a kWh in a power plant. The 700 kWh per year can be produced by an autonomous solar cell system with an area of 3 m 2 (efficiency 19%). The analysis is valid roughly for the area between 40 o northern and southern latitude. A comparison has been made between the total costs of a grid connection and the costs of an autonomous solar cell system. If all costs are capitalized and compiled, a grid connection will amount to about $6,000 (fuel costs are not included). The costs of a solar cell system producing 700 kWh per year are about the same or even lower. The modular nature of solar cell systems makes it possible to start with a certain number of appliances, depending on the amount of money one can spend. 6 tabs., 2 refs

Analysis operating and maintenance cost of Danish wind turbines in 1993

International Nuclear Information System (INIS)

Godtfredsen, F.

1994-10-01

A study of operation and maintenance (O and M) cost of Danish wind turbines has been carried out. The study is based on a questionnaire survey by the wind turbine owners association. The study shows a significant decline in the O and M cost from 55 kW machines installed in 1980-87 to modern machines. In 1993, the average total O and M cost for 55 kW and 150 kW turbines was approximately 0.22 DKK/kWh and 0.07 DKK/kWh, respectively. For 150 kW turbines, insurance and administration costs amounted to 0.04 DKK/kWh while repair and maintenance costs came to 0.03 DKK/kWh. In 1993, repair and maintenance cost were significantly higher for older vintages of 55 kW and 150 kW turbines, but it is not possible based on this study to conclude whether increasing O and M costs generally comes with increasing age. The statistical basis of this study is not large enough to conclude whether there are positive scale effects for ST's from 105 kW. Similarly, because of relatively few large WT are older than 10 years, it is not possible based on this study to predict the size of major future repair costs/reinvestments. To estimate the O and M costs more exactly, a larger empirical basis is needed. (au) (8 tabs., 17 ills., 11 refs.)

Models and Tabu Search Metaheuristics for Service Network Design with Asset-Balance Requirements

DEFF Research Database (Denmark)

Pedersen, Michael Berliner; Crainic, T.G.; Madsen, Oli B.G.

2009-01-01

This paper focuses on a generic model for service network design, which includes asset positioning and utilization through constraints on asset availability at terminals. We denote these relations as "design-balance constraints" and focus on the design-balanced capacitated multicommodity network...... design model, a generalization of the capacitated multicommodity network design model generally used in service network design applications. Both arc-and cycle-based formulations for the new model are presented. The paper also proposes a tabu search metaheuristic framework for the arc-based formulation....... Results on a wide range of network design problem instances from the literature indicate the proposed method behaves very well in terms of computational efficiency and solution quality....

Heat conduction thru supports between 3000K and 40K

International Nuclear Information System (INIS)

Nicol, T.H.

1983-11-01

Of fundamental importance in the design of any superconducting machinery is a reasonable prediction of the heat flow between the outside world at 300 0 K and a helium volume at roughly 4 0 K. As machines grow larger and energy costs higher the accuracy with which these estimates are made becomes more critical. Unfortunately, as cryogenic vessels become more complex so does the procedure for making estimates accurately

Development of a Low Cost 10kW Tubular SOFC Power System

Energy Technology Data Exchange (ETDEWEB)

Bessette, Norman [Acumentrics Corporation, Westwood, MA (United States); Litka, Anthony [Acumentrics Corporation, Westwood, MA (United States); Rawson, Jolyon [Acumentrics Corporation, Westwood, MA (United States); Schmidt, Douglas [Acumentrics Corporation, Westwood, MA (United States)

2013-06-06

The DOE program funded from 2003 through early 2013 has brought the Acumentrics SOFC program from an early stage R&D program to an entry level commercial product offering. The development work started as one of the main core teams under the DOE Solid State Energy Conversion Alliance (SECA) program administered by the National Energy Technology Laboratory (NETL) of the DOE. During the first phase of the program, lasting approximately 3-4 years, a 5kW machine was designed, manufactured and tested against the specification developed by NETL. This unit was also shipped to NETL for independent verification testing which validated all of the results achieved while in the laboratory at Acumentrics. The Acumentrics unit passed all criteria established from operational stability, efficiency, and cost projections. Passing of the SECA Phase I test allowed the program to move into Phase II of the program. During this phase, the overall objective was to further refine the unit meeting a higher level of performance stability as well as further cost reductions. During the first year of this new phase, the NETL SECA program was refocused towards larger size units and operation on coal gasification due to the severe rise in natural gas prices and refocus on the US supply of indigenous coal. At this point, the program was shifted to the U.S. DOE’s Energy Efficiency and Renewable Energy (EERE) division located in Golden, Colorado. With this shift, the focus remained on smaller power units operational on gaseous fuels for a variety of applications including micro combined heat and power (mCHP). To achieve this goal, further enhancements in power, life expectancy and reductions in cost were necessary. The past 5 years have achieved these goals with machines that can now achieve over 40% electrical efficiency and field units that have now operated for close to a year and a half with minimal maintenance. The following report details not only the first phase while under the SECA program

Realistic generation cost of solar photovoltaic electricity

International Nuclear Information System (INIS)

Singh, Parm Pal; Singh, Sukhmeet

2010-01-01

Solar photovoltaic (SPV) power plants have long working life with zero fuel cost and negligible maintenance cost but requires huge initial investment. The generation cost of the solar electricity is mainly the cost of financing the initial investment. Therefore, the generation cost of solar electricity in different years depends on the method of returning the loan. Currently levelized cost based on equated payment loan is being used. The static levelized generation cost of solar electricity is compared with the current value of variable generation cost of grid electricity. This improper cost comparison is inhibiting the growth of SPV electricity by creating wrong perception that solar electricity is very expensive. In this paper a new method of loan repayment has been developed resulting in generation cost of SPV electricity that increases with time like that of grid electricity. A generalized capital recovery factor has been developed for graduated payment loan in which capital and interest payment in each installment are calculated by treating each loan installment as an independent loan for the relevant years. Generalized results have been calculated which can be used to determine the cost of SPV electricity for a given system at different places. Results show that for SPV system with specific initial investment of 5.00 cents /kWh/year, loan period of 30 years and loan interest rate of 4% the levelized generation cost of SPV electricity with equated payment loan turns out to be 28.92 cents /kWh, while the corresponding generation cost with graduated payment loan with escalation in annual installment of 8% varies from 9.51 cents /kWh in base year to 88.63 cents /kWh in 30th year. So, in this case, the realistic current generation cost of SPV electricity is 9.51 cents /kWh and not 28.92 cents /kWh. Further, with graduated payment loan, extension in loan period results in sharp decline in cost of SPV electricity in base year. Hence, a policy change is required

School Operations and Maintenance: Best Practices For Controlling Energy Costs. A Guidebook for K-12 School System Business Officers and Facilities Managers

Science.gov (United States)

US Department of Energy, 2004

2004-01-01

Operations and maintenance (O&M) offers not only strategies for maintaining facilities, but also opportunities for reducing energy costs and increasing energy efficiency at existing schools, regardless of age. This Guidebook provides detailed and practical guidance on how K-12 school districts can plan and implement enhancements to their current…

Factors affecting mining costs

International Nuclear Information System (INIS)

Lowell, A.F.

1977-01-01

The subject is discussed under the following headings: investment decision-making, unit cost factors (declining ore grade, low-price contracts, ore grade/output relationship, above average cost increases). Economic, environmental, sociological and political aspects are considered. (U.K.)

16 CFR Appendix K to Part 305 - Representative Average Unit Energy Costs

Science.gov (United States)

2010-01-01

... Btu 1 Electricity 10.65¢/kWh 2,3 $.1065/kWh $31.21 Natural Gas $1.218/therm 4 $12.53/MCF 5,6 $0... kWh stands for kilo Watt hour. 3 1 kWh = 3,412 Btu. 4 1 therm = 100,000 Btu. Natural gas prices...

Wind farm balance of plant costs

International Nuclear Information System (INIS)

Craig, L.; Liebmann, C.

1992-01-01

The study consisted of a detailed investigation of the infrastructure required for the construction and operation of a windfarm in the UK. Costing of the equipment and installation was carried out for three UK sites, with different physical characteristics. A literature survey was carried out to determine current practice in the siting of turbines within windfarms in Europe and the USA. Wind turbines were then laid out on the sites selected for study. Requirements and costs for roads, foundations and site buildings, site electrical system and grid connection, the supervisory control and data acquisition system were discussed and evaluated. A comparison between the balance of plant costs for the 33-metre MS-3 400 kW wind turbine and the 50-metre LS-2 1 MW wind turbine was made for each area of study. Overall balance of plant costs was reviewed, with an investigation of the cost components which are most sensitive to variations. The balance of plant costs averaged over the three sites were 13.0 p/kWh/annum for the MS3 windfarms and 10.6 p/kWh/annum for the LS-2 windfarms. Maps of the sites under investigation, design drawings and tables of costs are included to give supporting information to the text. (author)

Advanced fuel cycle cost estimation model and its cost estimation results for three nuclear fuel cycles using a dynamic model in Korea

Energy Technology Data Exchange (ETDEWEB)

Kim, Sungki, E-mail: sgkim1@kaeri.re.kr [Korea Atomic Energy Research Institute, 1045 Daedeokdaero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Ko, Wonil [Korea Atomic Energy Research Institute, 1045 Daedeokdaero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Youn, Saerom; Gao, Ruxing [University of Science and Technology, 217 Gajungro, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Bang, Sungsig, E-mail: ssbang@kaist.ac.kr [Korea Advanced Institute of Science and Technology, Department of Business and Technology Management, 291 Deahak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

2015-11-15

Highlights: • The nuclear fuel cycle cost using a new cost estimation model was analyzed. • The material flows of three nuclear fuel cycle options were calculated. • The generation cost of once-through was estimated to be 66.88 mills/kW h. • The generation cost of pyro-SFR recycling was estimated to be 78.06 mills/kW h. • The reactor cost was identified as the main cost driver of pyro-SFR recycling. - Abstract: The present study analyzes advanced nuclear fuel cycle cost estimation models such as the different discount rate model and its cost estimation results. To do so, an analysis of the nuclear fuel cycle cost of three options (direct disposal (once through), PWR–MOX (Mixed OXide fuel), and Pyro-SFR (Sodium-cooled Fast Reactor)) from the viewpoint of economic sense, focusing on the cost estimation model, was conducted using a dynamic model. From an analysis of the fuel cycle cost estimation results, it was found that some cost gap exists between the traditional same discount rate model and the advanced different discount rate model. However, this gap does not change the priority of the nuclear fuel cycle option from the viewpoint of economics. In addition, the fuel cycle costs of OT (Once-Through) and Pyro-SFR recycling based on the most likely value using a probabilistic cost estimation except for reactor costs were calculated to be 8.75 mills/kW h and 8.30 mills/kW h, respectively. Namely, the Pyro-SFR recycling option was more economical than the direct disposal option. However, if the reactor cost is considered, the economic sense in the generation cost between the two options (direct disposal vs. Pyro-SFR recycling) can be changed because of the high reactor cost of an SFR.

Optimal Mandates and The Welfare Cost of Asymmetric Information: Evidence from The U.K. Annuity Market.

Science.gov (United States)

Einav, Liran; Finkelstein, Amy; Schrimpf, Paul

2010-05-01

Much of the extensive empirical literature on insurance markets has focused on whether adverse selection can be detected. Once detected, however, there has been little attempt to quantify its welfare cost, or to assess whether and what potential government interventions may reduce these costs. To do so, we develop a model of annuity contract choice and estimate it using data from the U.K. annuity market. The model allows for private information about mortality risk as well as heterogeneity in preferences over different contract options. We focus on the choice of length of guarantee among individuals who are required to buy annuities. The results suggest that asymmetric information along the guarantee margin reduces welfare relative to a first best symmetric information benchmark by about £127 million per year, or about 2 percent of annuitized wealth. We also find that by requiring that individuals choose the longest guarantee period allowed, mandates could achieve the first-best allocation. However, we estimate that other mandated guarantee lengths would have detrimental effects on welfare. Since determining the optimal mandate is empirically difficult, our findings suggest that achieving welfare gains through mandatory social insurance may be harder in practice than simple theory may suggest.

Optimal Mandates and The Welfare Cost of Asymmetric Information: Evidence from The U.K. Annuity Market*

Science.gov (United States)

Einav, Liran; Finkelstein, Amy; Schrimpf, Paul

2009-01-01

Much of the extensive empirical literature on insurance markets has focused on whether adverse selection can be detected. Once detected, however, there has been little attempt to quantify its welfare cost, or to assess whether and what potential government interventions may reduce these costs. To do so, we develop a model of annuity contract choice and estimate it using data from the U.K. annuity market. The model allows for private information about mortality risk as well as heterogeneity in preferences over different contract options. We focus on the choice of length of guarantee among individuals who are required to buy annuities. The results suggest that asymmetric information along the guarantee margin reduces welfare relative to a first best symmetric information benchmark by about £127 million per year, or about 2 percent of annuitized wealth. We also find that by requiring that individuals choose the longest guarantee period allowed, mandates could achieve the first-best allocation. However, we estimate that other mandated guarantee lengths would have detrimental effects on welfare. Since determining the optimal mandate is empirically difficult, our findings suggest that achieving welfare gains through mandatory social insurance may be harder in practice than simple theory may suggest. PMID:20592943

Cost-based droop scheme with lower generation costs for microgrids

DEFF Research Database (Denmark)

Nutkani, I. U.; Loh, Poh Chiang; Blaabjerg, Frede

2013-01-01

on the DG kVA ratings. Other operating characteristics like generation costs, efficiencies and emission penalties at different loadings have not been considered. This makes existing droop schemes not too well-suited for standalone microgrids without central management system, where different types of DGs...... usually exist. As an alternative, this paper proposes a cost-based droop scheme, whose objective is to reduce a generation cost realized with various DG operating characteristics taken into consideration. The proposed droop scheme therefore retains all advantages of the traditional droop schemes, while...... at the same time keep its generation cost low. These findings have been validated through simulation and scaled down lab experiment....

A survey of costs incurred in U.K. X-ray diffraction research laboratories as a consequence of proposed regulations for radiological safety

International Nuclear Information System (INIS)

Blow, D.M.

1981-01-01

A small survey of British X-ray diffraction laboratories was undertaken, with the aim of discovering the effects of the Health and Safety at Work Act (1974) and the draft regulations on radiological protection and ionising radiations (1978) on the practice of X-ray crystallography. The responses lead to the conclusion that the average cost incurred in bringing X-ray diffraction equipment to a safety standard compatible with the draft regulations (as judged by the respondents) will exceed Pound2,000 per X-ray generator. The safety costs will represent an overhead charge of at least 15-18% on the purchase of an X-ray generator, requiring additional capital outlay of over Pound5m to maintain the current level of X-ray diffraction activity in the U.K. There seems to be no evidence of a high accident rate with diffraction equipment, and the cost of the safety precautions bears no relation to the risks involved. (author)

Costs and benefits of rare earth screens

International Nuclear Information System (INIS)

Taylor, F.E.

1977-01-01

The British Institute of Radiology has submitted evidence (Royal Commission on Environmental Pollution, 1976, Sixth Report, Nuclear Power and the Environment. Cmnd 6618, HMSO, London) leading to the conclusion that the introduction of rare earth screens in medical radiography is not financially practical at present in the U.K. This conclusion is questioned. The cost of reducing the genetic dose from medical radiography should be compared with the costs of reducing that from other sources such as nuclear power wastes, since the risks are to future generations in both cases. The cost of reducing public exposure by the use of rare earth screens in U.K. hospitals is calculated to be about Pound1 per man-rad; a total annual genetic collective dose of nearly 300,000 man-rad could be saved. An anomalous situation is presented by the great discrepancies between this cost, and published estimates both of the cost of the detriment associated with the genetic collective dose and of the value incorporated into the design objective for nuclear reactors. (U.K.)

Symmetries, first integrals and splittability of dynamical systems

International Nuclear Information System (INIS)

Gonzalez Gascon, F.; Moreno Insertis, F.

1978-01-01

A method for reducing the order of a system of ordinary differential equations by means of the successive use of both a set of symmetries and of first integrals is introduced. The geometrical problems underlying this method are emphasized. The method generalizes the well known reduction in Hamiltonian systems

An Attacker-Defender Model for IP-Based Networks

National Research Council Canada - National Science Library

Barkley, Timothy R

2008-01-01

.... Because IP flows are defined essentially in terms of origin-destination (O-D) pairs, we represent IP traffic engineering as a multi-commodity flow problem in which each O-D pair is treated as a separate commodity...

Discovery of Paradigm Dependencies

OpenAIRE

Sun, Jizhou; Li, Jianzhong; Gao, Hong

2017-01-01

Missing and incorrect values often cause serious consequences. To deal with these data quality problems, a class of common employed tools are dependency rules, such as Functional Dependencies (FDs), Conditional Functional Dependencies (CFDs) and Edition Rules (ERs), etc. The stronger expressing ability a dependency has, data with the better quality can be obtained. To the best of our knowledge, all previous dependencies treat each attribute value as a non-splittable whole. Actually however, i...

Heliostat cost reduction study.

Energy Technology Data Exchange (ETDEWEB)

Jones, Scott A.; Lumia, Ronald. (University of New Mexico, Albuquerque, NM); Davenport, Roger (Science Applications International Corporation, San Diego, CA); Thomas, Robert C. (Advanced Thermal Systems, Centennial, CO); Gorman, David (Advanced Thermal Systems, Larkspur, CO); Kolb, Gregory J.; Donnelly, Matthew W.

2007-06-01

Power towers are capable of producing solar-generated electricity and hydrogen on a large scale. Heliostats are the most important cost element of a solar power tower plant. Since they constitute {approx} 50% of the capital cost of the plant it is important to reduce heliostat cost as much as possible to improve the economic performance of power towers. In this study we evaluate current heliostat technology and estimate a price of $126/m{sup 2} given year-2006 materials and labor costs for a deployment of {approx}600 MW of power towers per year. This 2006 price yields electricity at $0.067/kWh and hydrogen at $3.20/kg. We propose research and development that should ultimately lead to a price as low as $90/m{sup 2}, which equates to $0.056/kWh and $2.75/kg H{sup 2}. Approximately 30 heliostat and manufacturing experts from the United States, Europe, and Australia contributed to the content of this report during two separate workshops conducted at the National Solar Thermal Test Facility.

Expanding the Role of Maryland Community Colleges in K-12 Teacher Preparation: Benefits and Costs of Implementing the Associate of Arts in Teaching (AAT) Degree

Science.gov (United States)

Frank, Jennifer Vest

2012-01-01

This study uses benefit-cost analysis to compare three alternative scenarios for implementing the Associate of Arts in Teaching (AAT) degree in Maryland community colleges. The first policy scenario is that community colleges retain their traditional role in K-12 teacher preparation by providing lower-division transfer courses and programs for…

Cost Savings of Nuclear Power with Total Fuel Reprocessing

International Nuclear Information System (INIS)

Solbrig, Charles W.; Benedict, Robert W.

2006-01-01

The cost of fast reactor (FR) generated electricity with pyro-processing is estimated in this article. It compares favorably with other forms of energy and is shown to be less than that produced by light water reactors (LWR's). FR's use all the energy in natural uranium whereas LWR's utilize only 0.7% of it. Because of high radioactivity, pyro-processing is not open to weapon material diversion. This technology is ready now. Nuclear power has the same advantage as coal power in that it is not dependent upon a scarce foreign fuel and has the significant additional advantage of not contributing to global warming or air pollution. A jump start on new nuclear plants could rapidly allow electric furnaces to replace home heating oil furnaces and utilize high capacity batteries for hybrid automobiles: both would reduce US reliance on oil. If these were fast reactors fueled by reprocessed fuel, the spent fuel storage problem could also be solved. Costs are derived from assumptions on the LWR's and FR's five cost components: 1) Capital costs: LWR plants cost $106/MWe. FR's cost 25% more. Forty year amortization is used. 2) The annual O and M costs for both plants are 9% of the Capital Costs. 3) LWR fuel costs about 0.0035 $/kWh. Producing FR fuel from spent fuel by pyro-processing must be done in highly shielded hot cells which is costly. However, the five foot thick concrete walls have the advantage of prohibiting diversion. LWR spent fuel must be used as feedstock for the FR initial core load and first two reloads so this FR fuel costs more than LWR fuel. FR fuel costs much less for subsequent core reloads ( 6 /MWe. The annual cost for a 40 year licensed plant would be 2.5 % of this or less if interest is taken into account. All plants will eventually have to replace those components which become radiation damaged. FR's should be designed to replace parts rather than decommission. The LWR costs are estimated to be 2.65 cents/kWh. FR costs are 2.99 cents/kWh for the first

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 1: Summary report

Science.gov (United States)

1976-01-01

Wind turbine configurations that would lead to generation of electrical power in a cost effective manner were considered. All possible overall system configurationss, operating modes, and sybsystem concepts were evaluated for both technical feasibility and compatibility with utility networks, as well as for economic attractiveness. A design optimization computer code was developed to determine the cost sensitivity of the various design features, and thus establish the configuration and design conditions that would minimize the generated energy costs. The preliminary designs of both a 500 kW unit and a 1500 kW unit operating in a 12 mph and 18 mph median wind speed respectively, were developed. The rationale employed and the key findings are summarized.

Nuclear energy: the real cost

International Nuclear Information System (INIS)

Spencer, K.; Marshall, R.; Sweet, C.; Prior, M.; Welsh, I.; Bunyard, P.; Goldsmith, E.; Hildyard, N.; Jeffery, J.W.

1981-01-01

This report on the discussions within a small group of academics falls under the headings: chairman's foreword; summary and recommendations; the government's nuclear power programme and its implications; the CEGB's planning record; the past performance of Britain's nuclear power stations - a guide for the future (query); nuclear power -early uncertainties; historic costs - 'the fraud inherent in all inflationary finance'; current cost accounting; fuel costs - coal stays steady, nuclear rises; net effective cost and the rationale for nuclear power; reinterpreting net effective costs; other considerations; conclusions and recommendations; references. (U.K.)

Realistic costs of carbon capture

Energy Technology Data Exchange (ETDEWEB)

Al Juaied, Mohammed (Harvard Univ., Cambridge, MA (US). Belfer Center for Science and International Affiaris); Whitmore, Adam (Hydrogen Energy International Ltd., Weybridge (GB))

2009-07-01

There is a growing interest in carbon capture and storage (CCS) as a means of reducing carbon dioxide (CO2) emissions. However there are substantial uncertainties about the costs of CCS. Costs for pre-combustion capture with compression (i.e. excluding costs of transport and storage and any revenue from EOR associated with storage) are examined in this discussion paper for First-of-a-Kind (FOAK) plant and for more mature technologies, or Nth-of-a-Kind plant (NOAK). For FOAK plant using solid fuels the levelised cost of electricity on a 2008 basis is approximately 10 cents/kWh higher with capture than for conventional plants (with a range of 8-12 cents/kWh). Costs of abatement are found typically to be approximately US$150/tCO2 avoided (with a range of US$120-180/tCO2 avoided). For NOAK plants the additional cost of electricity with capture is approximately 2-5 cents/kWh, with costs of the range of US$35-70/tCO2 avoided. Costs of abatement with carbon capture for other fuels and technologies are also estimated for NOAK plants. The costs of abatement are calculated with reference to conventional SCPC plant for both emissions and costs of electricity. Estimates for both FOAK and NOAK are mainly based on cost data from 2008, which was at the end of a period of sustained escalation in the costs of power generation plant and other large capital projects. There are now indications of costs falling from these levels. This may reduce the costs of abatement and costs presented here may be 'peak of the market' estimates. If general cost levels return, for example, to those prevailing in 2005 to 2006 (by which time significant cost escalation had already occurred from previous levels), then costs of capture and compression for FOAK plants are expected to be US$110/tCO2 avoided (with a range of US$90-135/tCO2 avoided). For NOAK plants costs are expected to be US$25-50/tCO2. Based on these considerations a likely representative range of costs of abatement from CCS

Vitamin K to prevent fractures in older women: systematic review and economic evaluation.

Science.gov (United States)

Stevenson, M; Lloyd-Jones, M; Papaioannou, D

2009-09-01

To determine the clinical and cost-effectiveness of vitamin K in preventing osteoporotic fractures in postmenopausal women. Searches were conducted in May 2007 in MEDLINE, MEDLINE In-Process, EMBASE, Cochrane Database of Systematic Reviews, Cochrane Controlled Trials Register, BIOSIS, CINAHL, DARE, NHS EED and HTA databases, AMED, NRR, Science Citation Index and Current Controlled Trials. The MEDLINE search was updated in March 2009. Selected studies were assessed and subjected to data extraction and quality assessment using standard methods. Where appropriate, meta-analysis was carried out. A mathematical model was constructed to estimate the cost-effectiveness of vitamin K1. The electronic literature searches identified 1078 potentially relevant articles. Of these, 14 articles relating to five trials that compared vitamin K with a relevant comparator in postmenopausal women with osteoporosis or osteopenia met the review inclusion criteria. The double-blind ECKO trial compared 5 mg of phylloquinone (vitamin K1) with placebo in Canadian women with osteopenia but without osteoporosis. Four open-label trials used 45 mg of menatetrenone (vitamin K2) in Japanese women with osteoporosis; the comparators were no treatment, etidronate or calcium. The methodological quality of the ECKO trial was good; however, all four menatetrenone trials were poorly reported and three were very small (n vitamin K were found and a mathematical model was thus constructed to estimate the cost-effectiveness of vitamin K1. Comparators were alendronate, risedronate and strontium ranelate. Vitamin K1 and alendronate were markedly more cost-effective than either risedronate or strontium ranelate. The base-case results favoured vitamin K1, but this relied on many assumptions, particularly on the efficacy of preventing hip and vertebral fractures. Calculation of the expected value of sampled information was conducted assuming a randomised controlled trial of 5 years' duration comparing alendronate

A multi-objective robust optimization model for logistics planning in the earthquake response phase

NARCIS (Netherlands)

Najafi, M.; Eshghi, K.; Dullaert, W.E.H.

2013-01-01

Usually, resources are short in supply when earthquakes occur. In such emergency situations, disaster relief organizations must use these scarce resources efficiently to achieve the best possible emergency relief. This paper therefore proposes a multi-objective, multi-mode, multi-commodity, and

A 200-kW wind turbine generator conceptual design study

Science.gov (United States)

1979-01-01

A conceptual design study was conducted to define a 200 kW wind turbine power system configuration for remote applications. The goal was to attain an energy cost of 1 to 2 cents per kilowatt-hour at a 14-mph site (mean average wind velocity at an altitude of 30 ft.) The costs of the Clayton, New Mexico, Mod-OA (200-kW) were used to identify the components, subsystems, and other factors that were high in cost and thus candidates for cost reduction. Efforts devoted to developing component and subsystem concepts and ideas resulted in a machine concept that is considerably simpler, lighter in weight, and lower in cost than the present Mod-OA wind turbines. In this report are described the various innovations that contributed to the lower cost and lighter weight design as well as the method used to calculate the cost of energy.

Insurance cost of Swedish nuclear power plants

International Nuclear Information System (INIS)

Kaellstrand, Aasa.

1992-01-01

What happens if a reactor accident occurs? Can victims of a nuclear accident be compensated for losses? The rights of a victim of a nuclear accident to be compensated for losses are governed by international conventions. These conventions make the licensee of a nuclear plant strictly liable. However, the maximum amount of compensation is limited. In Sweden the total liability of the plant-owner is maximized to 1.2 million Swedish Crowns, that is 0.02 oere/kWh. After the accidents of Harrisburg (1979) and Chernobyl (1986), it has become clear that the amounts of the various conventions are not at all sufficient to cover the damages caused by such an accident. In spite of these facts, there are a large number of reliable sources, who think that the insurance costs are negligible in the cost of production. A cost-benefit analysis based on a study performed by Ottinger et al. in 'Environmental costs of electricity' is therefore adopted to derive the costs of the external effects of nuclear plant operation and from releases to the environment during operation. The environmental externality costs of Swedish nuclear power plant operations are in this report estimated to 18.3 oere/kWh. This figure can be compared to the insurance cost, which for the present is 0.02 oere/kWh. The 'real' insurance cost including the external effects is calculated to approximately 1.12 billion Swedish Crowns] That is 900 times larger than the insurance premium, which the licensee of a nuclear plant faces] (au)

Oil spill risk assessment in maritime transportation networks

International Nuclear Information System (INIS)

Yudhbir, L.; Iakovou, E.

2005-01-01

Commercial shippers and regulatory agencies face the challenge of evaluating the merits of various alternative policies for the transportation of crude oil and petroleum products. This paper presented a new risk estimation and assignment methodology that assesses the risk costs for the bodies of water where shipping lanes exist. The methodology is based on historical spills and uses causal data to estimate risk cost between 2 points of reference for numerous products transported by a variety of vessels. In response to public concerns regarding the environmental impacts of accidental spills from tanker ships, laws have been imposed on companies for all costs relating to environmental damage. This measure has prompted the oil industry to take greater responsibility, but a better understanding of tanker re-routing on environmental sensitive areas is needed in order to implement detailed emergency response plans and greater safety precautions. This methodology addressed the need for an efficient maritime transportation system that provides routing for various vessels carrying different petroleum products. The risk estimation methodology successfully modeled a multi-objective, multi-commodity routing problem. 23 refs., 3 figs

Fuel Cell System for Transportation -- 2005 Cost Estimate

Energy Technology Data Exchange (ETDEWEB)

Wheeler, D.

2006-10-01

Independent review report of the methodology used by TIAX to estimate the cost of producing PEM fuel cells using 2005 cell stack technology. The U.S. Department of Energy (DOE) Hydrogen, Fuel Cells and Infrastructure Technologies Program Manager asked the National Renewable Energy Laboratory (NREL) to commission an independent review of the 2005 TIAX cost analysis for fuel cell production. The NREL Systems Integrator is responsible for conducting independent reviews of progress toward meeting the DOE Hydrogen Program (the Program) technical targets. An important technical target of the Program is the proton exchange membrane (PEM) fuel cell cost in terms of dollars per kilowatt ($/kW). The Program's Multi-Year Program Research, Development, and Demonstration Plan established $125/kW as the 2005 technical target. Over the last several years, the Program has contracted with TIAX, LLC (TIAX) to produce estimates of the high volume cost of PEM fuel cell production for transportation use. Since no manufacturer is yet producing PEM fuel cells in the quantities needed for an initial hydrogen-based transportation economy, these estimates are necessary for DOE to gauge progress toward meeting its targets. For a PEM fuel cell system configuration developed by Argonne National Laboratory, TIAX estimated the total cost to be $108/kW, based on assumptions of 500,000 units per year produced with 2005 cell stack technology, vertical integration of cell stack manufacturing, and balance-of-plant (BOP) components purchased from a supplier network. Furthermore, TIAX conducted a Monte Carlo analysis by varying ten key parameters over a wide range of values and estimated with 98% certainty that the mean PEM fuel cell system cost would be below DOE's 2005 target of $125/kW. NREL commissioned DJW TECHNOLOGY, LLC to form an Independent Review Team (the Team) of industry fuel cell experts and to evaluate the cost estimation process and the results reported by TIAX. The results of

*K-means and Cluster Models for Cancer Signatures

OpenAIRE

Kakushadze, Zura; Yu, Willie

2017-01-01

We present *K-means clustering algorithm and source code by expanding statistical clustering methods applied in https://ssrn.com/abstract=2802753 to quantitative finance. *K-means is statistically deterministic without specifying initial centers, etc. We apply *K-means to extracting cancer signatures from genome data without using nonnegative matrix factorization (NMF). *K-means’ computational cost is a fraction of NMF’s. Using 1389 published samples for 14 cancer types, we find that 3 cancer...

Cost-effectiveness analysis of apixaban compared to low-molecularweight heparins and vitamin k antagonists for treatment and secondary prevention of venous thromboembolism

Directory of Open Access Journals (Sweden)

Isabel Elías

2016-05-01

Full Text Available Objective: Cost-effectiveness analysis of a 6-month treatment of apixaban (10 mg/12h, first 7 days; 5 mg/12h afterwards for the treatment of the first event of venous thromboembolism (VTE and prevention of recurrences, versus low-molecular-weight heparins/vitamin K antagonists treatment (LMWH/VKA. Material and methods: A lifetime Markov model with 13 health states was used for describing the course of the disease. Efficacy and safety data were obtained from AMPLIFY and AMPLIFY-EXT clinical trials; health outcomes were measured as life years gained (LYG and quality-adjusted life years (QALY. The chosen perspective of this analysis has been the Spanish National Health System (NHS. Drugs, management of VTE and complications costs were obtained from several Spanish data sources (€, 2014. A 3% discount rate was applied to health outcomes and costs. Univariate and probabilistic sensitivity analyses (SA were performed in order to assess the robustness of the results. Results: Apixaban was the most effective therapy with 7.182 LYG and 5.865 QALY, versus 7.160 LYG and 5.838 QALYs with LMWH/VKA. Furthermore, apixaban had a lower total cost (€13,374.70 vs €13,738.30. Probabilistic SA confirmed dominance of apixaban (led to better health outcomes with less associated costs in 89% of the simulations. Conclusions: Apixaban 5 mg/12h versus LMWH/VKA was an efficient therapeutic strategy for the treatment and prevention of recurrences of VTE from the NHS perspective.

Optimal cost for strengthening or destroying a given network

Science.gov (United States)

Patron, Amikam; Cohen, Reuven; Li, Daqing; Havlin, Shlomo

2017-05-01

Strengthening or destroying a network is a very important issue in designing resilient networks or in planning attacks against networks, including planning strategies to immunize a network against diseases, viruses, etc. Here we develop a method for strengthening or destroying a random network with a minimum cost. We assume a correlation between the cost required to strengthen or destroy a node and the degree of the node. Accordingly, we define a cost function c (k ) , which is the cost of strengthening or destroying a node with degree k . Using the degrees k in a network and the cost function c (k ) , we develop a method for defining a list of priorities of degrees and for choosing the right group of degrees to be strengthened or destroyed that minimizes the total price of strengthening or destroying the entire network. We find that the list of priorities of degrees is universal and independent of the network's degree distribution, for all kinds of random networks. The list of priorities is the same for both strengthening a network and for destroying a network with minimum cost. However, in spite of this similarity, there is a difference between their pc, the critical fraction of nodes that has to be functional to guarantee the existence of a giant component in the network.

Cost-Effectiveness Analysis of Pharmacotherapy for Hematemesis-Melena Treatment in Hospitalized Patients with Hepatic Cirrhosis

Directory of Open Access Journals (Sweden)

Doddy de Queljoe

2013-04-01

Full Text Available BACKGROUND: Acute variceal haemorrhage is a complication of cirrhosis that can be life threatening. It is a pharmacist’s duty to ensure therapeutic and pharmaceutical care which is not only safe and effective for the patient but also is cost-effective in order to attain improvement of the patient’s quality of life. Therefore, pharmacoeconomic evaluation especially cost-effectiveness analysis (CEA, which compares costs and consequences of drug therapy, is needed. This study was aimed to evaluate the therapeutic cost-effectiveness of hematemesis-melena treatment in hepatic cirrhotic patients. METHODS: A total of 42 patients receiving vitamin K and vitamin K-transamin were studied retrospectively from patients’ medical records in 2 years and analyzed with cost-effectiveness grid and average cost-effectiveness ratio (ACER based on Child-Turcotte-Pugh (CTP Score. RESULTS: Cost-effectiveness grid was dominant for vitamin K in patients with CTP Score A. ACER analysis showed a lower score for vitamin K in all patients included CTP Score classification. There was no significant difference in duration of cessation of bleeding treatment in patients with vitamin K compared with vitamin K-transamin in patients with CTP Score A and B, while significant difference was found in patients with CTP Score C. CONCLUSIONS: Vitamin K appeared to be more cost effective as compared with vitamin K-transamin in all patients. The use of vitamin K had greater benefit than the combination with transamin in all patients and CTP Score classification, and thus should be considered as a primary therapy. Therefore, transamin addition as an alternative therapy for hepatic cirrhosis patients with hematemesis-melena should be considered. KEYWORDS: CEA, cost-effectiveness analysis, child-turcotte-pugh score, hepatic cirrhosis, hematemesismelena, vitamin K, transamin.

42 CFR 417.538 - Enrollment and marketing costs.

Science.gov (United States)

2010-10-01

... PREPAYMENT PLANS Medicare Payment: Cost Basis § 417.538 Enrollment and marketing costs. (a) Principle. Costs incurred by an HMO or CMP in performing the enrollment and marketing activities described in subpart k of... 42 Public Health 3 2010-10-01 2010-10-01 false Enrollment and marketing costs. 417.538 Section 417...

Life cycle cost analysis of HPVT air collector under different Indian climatic conditions

International Nuclear Information System (INIS)

Raman, Vivek; Tiwari, G.N.

2008-01-01

In this communication, a study is carried out to evaluate an annual thermal and exergy efficiency of a hybrid photovoltaic thermal (HPVT) air collector for different Indian climate conditions, of Srinagar, Mumbai, Jodhpur, New Delhi and Banglore. The study has been based on electrical, thermal and exergy output of the HPVT air collector. Further, the life cycle analysis in terms of cost/kWh has been carried out. The main focus of the study is to see the effect of interest rate, life of the HPVT air collector, subsidy, etc. on the cost/kWh HPVT air collector. A comparison is made keeping in view the energy matrices. The study reveals that (i) annual thermal and electrical efficiency decreases with increase in solar radiation and (ii) the cost/kWh is higher in case of exergy when compared with cost/kWh on the basis of thermal energy for all climate conditions. The cost/kWh for climate conditions of Jodhpur is most economical

Study to establish cost projections for production of Redox chemicals

Science.gov (United States)

Walther, J. F.; Greco, C. C.; Rusinko, R. N.; Wadsworth, A. L., III

1982-01-01

A cost study of four proposed manufacturing processes for redox chemicals for the NASA REDOX Energy Storage System yielded favorable selling prices in the range $0.99 to $1.91/kg of chromic chloride, anhydrous basis, including ferrous chloride. The prices corresponded to specific energy storage costs from under $9 to $17/kWh. A refined and expanded cost analysis of the most favored process yielded a price estimate corresponding to a storage cost of $11/kWh. The findings supported the potential economic viability of the NASA REDOX system.

The external cost of the nuclear fuel cycle

International Nuclear Information System (INIS)

Schieber, C.; Schneider, T.

2002-01-01

The external cost of the nuclear fuel cycle has been evaluated in the particular context of France as part of the European Commission's ExternE project. All the steps in the fuel cycle which involve the use of cutting edge technology were taken into consideration, from mining of uranium ores to waste disposal, via construction, dismantling of nuclear power plants and the transport of radioactive materials. The general methodology adopted in the study, known as the 'Impact Pathway Analysis', is based on a sequence of evaluations from source terms to the potential= effects on man and the environment, and then to their monetary evaluation, using a single framework devised for all the fuel cycles considered in the ExternE project. The resulting external cost is in the range of 2 to 3 mEuro/kWh when no discount rate is applied, and around 0.1 mEuro/kWh when a discount rate of 3% is considered. Further developments have been made on the external cost of a nuclear accident and on the integration of risk aversion in its evaluation. It appeared that the external cost of a nuclear accident would be about 0.04 mEuro/kWh, instead of 0.002 mEuro/kWh without taking risk aversion into account. (authors)

Trends in transmission, distribution, and administration costs for U.S. investor-owned electric utilities

International Nuclear Information System (INIS)

Fares, Robert L.; King, Carey W.

2017-01-01

This paper analyzes the cost of transmission, distribution, and administration for U.S. investor-owned electric utilities. We analyze data reported to the Federal Energy Regulatory Commission (FERC) from 1994 to 2014 using linear regression to understand how the number of customers in a utility's territory, annual peak demand, and annual energy sales affect annual TD&A spending. Then, we use Edison Electric Institute data for 1960 to 1992 to show trends in TD&A spending between 1960 and 2014. We find that the number of customers in a utility's territory is the single best predictor for annual TD&A costs. Between 1994 and 2014, the average cost per customer was $119/Customer-Year for transmission, $291/Customer-Year for distribution, and $333/Customer-Year for utility administration. Total TD&A costs per customer have been approximately $700–$800/Customer-Year since 1960, but the cost per kWh of energy sold was significantly higher in the 1960s because the average customer used less than half as much energy annually versus 2014. Thus, TD&A costs per kWh are likely to increase if kWh energy sales decline in the future unless cost recovery is transitioned to a mechanism not based solely on kWh sales. - Highlights: • U.S. investor-owned electric utility delivery costs from 1960? 2014 are investigated. • Transmission, distribution, and utility administrative costs are analyzed separately. • The number of utility customers is the best predictor for annual delivery costs. • Delivery costs per kWh are likely to increase if kWh sales decrease in the future.

Benefit/cost comparisons for utility SMES applications

International Nuclear Information System (INIS)

De Steese, J.G.; Dagle, J.E.

1991-01-01

This paper summarizes eight cases studies that account for the benefits and costs of superconducting magnetic energy storage (SMES) in system-specific utility applications. Four of these scenarios are hypothetical SMES application in the Pacific Northwest, where relatively low energy costs impose a stringent test on the viability of the concept. The other four scenarios address SMES applications on high-voltage, direct-current (HVDC) transmission lines. While estimated SMES benefits are based on a previously reported methodology, this paper presents results of an improved cost-estimating approach that includes an assumed reduction in the cost of the power conditioning system (PCS) from approximately $160/kW to $80/kW. The revised approach results in all the SMES scenarios showing higher benefit/cost ratios that those reported earlier. However, in all but two cases, the value of any single benefit is still less than the unit's levelized cost. This suggests, as a general principle, that the total value of multiple benefits should always be considered if SMES is to appear cost effective in may utility applications. These results should offer utilities further encouragement to conduct more detailed analyses of SMES benefits in scenarios that apply to individual systems

Benefit/cost comparison for utility SMES applications

Science.gov (United States)

Desteese, J. G.; Dagle, J. E.

1991-08-01

This paper summarizes eight case studies that account for the benefits and costs of superconducting magnetic energy storage (SMES) in system-specific utility applications. Four of these scenarios are hypothetical SMES applications in the Pacific Northwest, where relatively low energy costs impose a stringent test on the viability of the concept. The other four scenarios address SMES applications on high-voltage, direct-current (HVDC) transmission lines. While estimated SMES benefits are based on a previously reported methodology, this paper presents results of an improved cost-estimating approach that includes an assumed reduction in the cost of the power conditioning system (PCS) from approximately $160/kW to $80/kW. The revised approach results in all the SMES scenarios showing higher benefit/cost ratios than those reported earlier. However, in all but two cases, the value of any single benefit is still less than the unit's levelized cost. This suggests, as a general principle, that the total value of multiple benefits should always be considered if SMES is to appear cost effective in many utility applications. These results should offer utilities further encouragement to conduct more detailed analyses of SMES benefits in scenarios that apply to individual systems.

Overview of Air Liquide refrigeration systems between 1.8 K and 200 K

Science.gov (United States)

Gondrand, C.; Durand, F.; Delcayre, F.; Crispel, S.; Baguer, G. M. Gistau

2014-01-01

Cryogenic refrigeration systems are necessary for numerous applications. Gas purification and distillation require temperatures between 15 K and 200 K depending on the application, space simulation chambers down to 15 K, superconductivity between 1.8 K and up to 75 K (magnets, cavities or HTS devices like cables, FCL, SMES, etc), Cold Neutron Sources between 15 and 20 K, etc. Air Liquide Advanced Technologies is designing and manufacturing refrigerators since 60 years to satisfy those needs. The step by step developments achieved have led to machines with higher efficiency and reliability. In 1965, reciprocating compressors and Joule Thomson expansion valves were used. In 1969, centripetal expanders began to be used. In 1980, oil lubricated screw compressors took the place of reciprocating compressors and a standard range of Claude cycle refrigerators was developed: the HELIAL series. 1980 was also the time for cryogenic centrifugal compressor development. In 2011, driven by the need for lower operational cost (high efficiency and low maintenance), cycle oil free centrifugal compressors on magnetic bearings were introduced instead of screw compressors. The power extracted by centripetal expanders was recovered. Based on this technology, a range of Turbo-Brayton refrigerators has been designed for temperatures between 40 K and 150 K. On-going development will enable widening the range of Turbo-Brayton refrigerators to cryogenic temperatures down to 15 K.. Cryogenic centrifugal circulators have been developed in order to answer to an increasing demand of 4 K refrigerators able to distribute cold power.

Overview of Air Liquide refrigeration systems between 1.8 K and 200 K

International Nuclear Information System (INIS)

Gondrand, C.; Durand, F.; Delcayre, F.; Crispel, S.; Baguer, G. M. Gistau

2014-01-01

Cryogenic refrigeration systems are necessary for numerous applications. Gas purification and distillation require temperatures between 15 K and 200 K depending on the application, space simulation chambers down to 15 K, superconductivity between 1.8 K and up to 75 K (magnets, cavities or HTS devices like cables, FCL, SMES, etc), Cold Neutron Sources between 15 and 20 K, etc. Air Liquide Advanced Technologies is designing and manufacturing refrigerators since 60 years to satisfy those needs. The step by step developments achieved have led to machines with higher efficiency and reliability. In 1965, reciprocating compressors and Joule Thomson expansion valves were used. In 1969, centripetal expanders began to be used. In 1980, oil lubricated screw compressors took the place of reciprocating compressors and a standard range of Claude cycle refrigerators was developed: the HELIAL series. 1980 was also the time for cryogenic centrifugal compressor development. In 2011, driven by the need for lower operational cost (high efficiency and low maintenance), cycle oil free centrifugal compressors on magnetic bearings were introduced instead of screw compressors. The power extracted by centripetal expanders was recovered. Based on this technology, a range of Turbo-Brayton refrigerators has been designed for temperatures between 40 K and 150 K. On-going development will enable widening the range of Turbo-Brayton refrigerators to cryogenic temperatures down to 15 K.. Cryogenic centrifugal circulators have been developed in order to answer to an increasing demand of 4 K refrigerators able to distribute cold power

Overview of Air Liquide refrigeration systems between 1.8 K and 200 K

Energy Technology Data Exchange (ETDEWEB)

Gondrand, C.; Durand, F.; Delcayre, F.; Crispel, S. [AL-AT, 2 rue de Clémencières, 38360 Sassenage (France); Baguer, G. M. Gistau [CRYOGUY, 44, chemin de la Buisse, 38330 Biviers (France)

2014-01-29

Cryogenic refrigeration systems are necessary for numerous applications. Gas purification and distillation require temperatures between 15 K and 200 K depending on the application, space simulation chambers down to 15 K, superconductivity between 1.8 K and up to 75 K (magnets, cavities or HTS devices like cables, FCL, SMES, etc), Cold Neutron Sources between 15 and 20 K, etc. Air Liquide Advanced Technologies is designing and manufacturing refrigerators since 60 years to satisfy those needs. The step by step developments achieved have led to machines with higher efficiency and reliability. In 1965, reciprocating compressors and Joule Thomson expansion valves were used. In 1969, centripetal expanders began to be used. In 1980, oil lubricated screw compressors took the place of reciprocating compressors and a standard range of Claude cycle refrigerators was developed: the HELIAL series. 1980 was also the time for cryogenic centrifugal compressor development. In 2011, driven by the need for lower operational cost (high efficiency and low maintenance), cycle oil free centrifugal compressors on magnetic bearings were introduced instead of screw compressors. The power extracted by centripetal expanders was recovered. Based on this technology, a range of Turbo-Brayton refrigerators has been designed for temperatures between 40 K and 150 K. On-going development will enable widening the range of Turbo-Brayton refrigerators to cryogenic temperatures down to 15 K.. Cryogenic centrifugal circulators have been developed in order to answer to an increasing demand of 4 K refrigerators able to distribute cold power.

Parametric cost analysis of a HYLIFE-II power plant

International Nuclear Information System (INIS)

Bieri, R.L.

1991-01-01

The SAFIRE (Systems Analysis for ICF Reactor Economics) code was adapted to model a power plant using a HYLIFE-2 reactor chamber. The code was then used to examine the dependence of the plant capital costs and the busbar cost of electricity (COE) on a variety of design parameters (type of driver, chamber repetition rate, and net electric power). The results show the most attractive operating space for each set of driver/target assumptions and quantify the benefits of improvements in key design parameters. The base-case plant was a 1000-MW(e) plant containing a reactor vessel driven by an induction linac heavy-ion accelerator, run at 8 Hz with a driver energy of 6.73 MJ and a target yield of 350 MJ. The total direct cost for this plant was $2.6 billion. (All costs in this paper are given in equivalent 1988 dollars.) The COE was 8.5 cents/(kWh). The COE and total capital costs for a 1000-MW(e) base plant are nearly independent of the chosen combination of repetition rate and driver energy for a driver operating between 4 and 10 Hz. For comparison, the COE for a coal or future fission plant would be 4.5--5.5 cents/(kWh). The COE for a 1000-MW(e) plant could be reduced to 7.5 cents/(kWh) by using advanced targets and could be cut to 6.5 cents/(kWh) with conventional targets, if the driver cost could be cut in half. There is a large economy of scale with heavy-ion-driven inertial confinement fusion (ICF) plants. A 2000-MW(e) plant with a heavy-ion driver and a HYLIFE-2 chamber would have a COE of only 5.8 cents/(kWh)

Cost of generating tritium internal and external to a tokamak hybrid reactor

International Nuclear Information System (INIS)

Crotzer, M.E.; Heck, F.M.; Steinke, K.C.

1981-01-01

The costs associated with producing tritium internal and external to a thorium-based tokamak hybrid are estimated for a number of scenarios and the resulting impact on the symbiotic system cost of electricity calculated. For tritium generation within the hybrid, both continuous and batch production is analyzed. For external production, the lithium-bearing blanket is replaced with thorium and the tritium is generated in the client fission reactors. Continuous tritium production within the hybrid is found to increase the cost of electricity from 1.4 to 4.0 mills/kW-h. Batch tritium production can increase the cost of electricity by 10 mills/kW-h. Producing tritium outside the hybrid, and thereby enhancing client support, increases the cost of electricity from 1.8 to 4.1 mills/kW-h

The efficacy of K-edge filters in diagnostic radiology

International Nuclear Information System (INIS)

Williamson, B.D.P.; van Doorn, T.

1994-01-01

The application of K-edge filters in diagnostic has been investigated by many workers for over twenty years. These investigations have analysed the effects of such filters on image quality and radiation dose as well as the practicalities of their application. This paper presents a synopsis of the published works and concludes that K-edge filters do not perceptibly improve image quality and make only limited reductions in patient dose. K-edge filters are also costly to purchase and potentially result in a reduction in the cost effectiveness of x-ray examinations by increasing the x-ray tube loading. Equivalent contrast enhancement and dose reductions can be achieved by the assiduous choice of non-selective filters. 51 refs., 2 tab., 6 figs

overall cost in recurrent soft-tissue sarcoma

Directory of Open Access Journals (Sweden)

Arash O. Naghavi

2017-01-01

Full Text Available Purpose : Adjuvant brachytherapy (AB with immediate (IR and staged reconstruction (SR are distinct treatment modalities available for patients with recurrent soft tissue sarcoma (STS. Although SR may offer local control and toxicity benefit, it requires additional upfront procedures, and there is no evidence that it improves overall survival. With the importance of value-based care, our goal is to identify which technique is more cost effective. Material and methods : A retrospective review of 22 patients with recurrent extremity STS treated with resection followed by AB alone. Hospital charges were used to compare the cost between SR and IR at the time of initial treatment, at 6-month intervals following surgery, and cumulative cost comparisons at 18 months. Results : Median follow-up was 31 months. Staged reconstruction (n = 12 was associated with an 18-month local control benefit (85% vs. 42%, p = 0.034, compared to IR (n = 10. Staged reconstruction had a longer hospital stay during initial treatment (10 vs. 3 days, p = 0.002, but at 18 months, the total hospital stay was no longer different (11 vs. 11 days. Initially, there was no difference in the cost of SR and IR. With longer follow-up, cost eventually favored SR, which was attributed primarily to the costs associated with local failure (LF. On multivariate analysis, cost of initial treatment was associated with length of hospital stay (~$4.5K per hospital day, p < 0.001, and at 18 months, the cumulative cost was ~175K lower with SR (p = 0.005 and $58K higher with LF (p = 0.02. Conclusions : In recurrent STS, SR has a longer initial hospital stay when compared to IR. At 18 months, SR had lower rates of LF, translating to lower total costs for the patient. SR is the more cost-effective brachytherapy approach in the treatment of STS, and should be considered as healthcare transitions into value-based medicine.

Development of an experimental variable temperature set-up for a temperature range from 2.2 K to 325 K for cost-effective temperature sensor calibration

Science.gov (United States)

Pal, Sandip; Kar, Ranjan; Mandal, Anupam; Das, Ananda; Saha, Subrata

2017-05-01

A prototype of a variable temperature insert has been developed in-house as a cryogenic thermometer calibration facility. It was commissioned in fulfilment of the very stringent requirements of the temperature control of the cryogenic system. The calibration facility is designed for calibrating industrial cryogenic thermometers that include a temperature sensor and the wires heat-intercept in the 2.2 K-325 K temperature range. The isothermal section of the calibration block onto which the thermometers are mounted is weakly linked with the temperature control zone mounted with cooling capillary coil and cryogenic heater. The connecting wires of the thermometer are thermally anchored with the support of the temperature insert. The calibration procedure begins once the temperature of the support is stabilized. Homogeneity of the calibration block’s temperature is established both by simulation and by cross-comparison of two calibrated sensors. The absolute uncertainty present in temperature measurement is calculated and found comparable with the measured uncertainty at different temperature points. Measured data is presented in comparison to the standard thermometers at fixed points and it is possible to infer that the absolute accuracy achieved is better than  ±0.5% of the reading in comparison to the fixed point temperature. The design and development of simpler, low cost equipment, and approach to analysis of the calibration results are discussed further in this paper, so that it can be easily devised by other researchers.

CALiPER Report 21.3. Cost Effectiveness of Linear (T8) LED Lamps

Energy Technology Data Exchange (ETDEWEB)

None

2014-05-01

Meeting performance expectations is important for driving adoption of linear LED lamps, but cost-effectiveness may be an overriding factor in many cases. Linear LED lamps cost more initially than fluorescent lamps, but energy and maintenance savings may mean that the life-cycle cost is lower. This report details a series of life-cycle cost simulations that compared a two-lamp troffer using LED lamps (38 W total power draw) or fluorescent lamps (51 W total power draw) over a 10-year study period. Variables included LED system cost ($40, $80, or $120), annual operating hours (2,000 hours or 4,000 hours), LED installation time (15 minutes or 30 minutes), and melded electricity rate ($0.06/kWh, $0.12/kWh, $0.18/kWh, or $0.24/kWh). A full factorial of simulations allows users to interpolate between these values to aid in making rough estimates of economic feasibility for their own projects. In general, while their initial cost premium remains high, linear LED lamps are more likely to be cost-effective when electric utility rates are higher than average and hours of operation are long, and if their installation time is shorter.

CALiPER Report 21.3: Cost-Effectiveness of Linear (T8) LED Lamps

Energy Technology Data Exchange (ETDEWEB)

Miller, Naomi J.; Perrin, Tess E.; Royer, Michael P.

2014-05-27

Meeting performance expectations is important for driving adoption of linear LED lamps, but cost-effectiveness may be an overriding factor in many cases. Linear LED lamps cost more initially than fluorescent lamps, but energy and maintenance savings may mean that the life-cycle cost is lower. This report details a series of life-cycle cost simulations that compared a two-lamp troffer using LED lamps (38 W total power draw) or fluorescent lamps (51 W total power draw) over a 10-year study period. Variables included LED system cost ($40, $80, or $120), annual operating hours (2,000 hours or 4,000 hours), LED installation time (15 minutes or 30 minutes), and melded electricity rate ($0.06/kWh, $0.12/kWh, $0.18/kWh, or $0.24/kWh). A full factorial of simulations allows users to interpolate between these values to aid in making rough estimates of economic feasibility for their own projects. In general, while their initial cost premium remains high, linear LED lamps are more likely to be cost-effective when electric utility rates are higher than average and hours of operation are long, and if their installation time is shorter.

Fiscal implications of a 1-mill/kWh waste management fee

International Nuclear Information System (INIS)

Engel, R.L.; White, M.K.

1982-12-01

The variations in parameters and uncertainties that can affect future waste management program costs are examined. Costs were estimated for both spent fuel and reprocessing waste disposal. Costs for repository site exploration and development, construction and operation of the first two repositories, and waste transportation of either spent fuel or reprocessing waste to the repository were included in the estimate of program costs. Costs for disposing of either spent fuel or reprocessing wastes in four generic geologic media (domed salt, bedded salt, tuff, and granite) were estimated considering uncertainties in package design waste preparation, mining cost, repository layout, repository startup date, and waste shipment distance. The range of these costs is then compared with estimated revenues from the proposed 1-mill/kWh fee to determine whether that fee would provide sufficient funds to meet waste management program needs. The estimated revenues and the range of program cost estimates in 1982 dollar resulting from these variations and uncertainties are shown graphically. The figure shows that the assumed 1-mill/kWh fee provides sufficient revenues to meet program costs for the range of conditions considered. Collection of a 1-mill/kWh fee at the time fuel is irradiated will result in the federal government precollecting for future waste management services. The relationship between funds accumulated to offset future waste management liabilities and the estimated cost of these liabilities will depend on the inflation rate and on the interest the federal government earns on the accumulated funds. If inflation continues, future fee adjustments will be required to assure that adequate funds are available to dispose of wastes when they are received

Cost estimation of thermal and nuclear power using annual securities report

International Nuclear Information System (INIS)

Matsuo, Yuji; Nagatomi, Yu; Murakami, Tomoko

2011-01-01

Cost estimation of generation cost derived from various power sources was widely conducted using model plant or annual securities report of electric utilities. Although annual securities report method was subjected to some limitation in methodology itself, useful information was obtained for cost comparison of thermal and nuclear power. Studies on generation cost evaluation of thermal and nuclear power based on this method during past five years showed that nuclear power cost was almost stable 7 Yen/kWh and thermal power cost was varying 9 - 12 Yen/kWh dependent on violent fluctuations of primary energy cost. Nuclear power was expected cost increase due to enhanced safety requirements or damage compensation of accidents as well as decommissioning and back-end cost, which were difficult to evaluate accurately with annual securities report. Further comprehensive and accurate cost estimation should be encouraged including these items. (T. Tanaka)

Nuclear power investment and generating costs from a utility point of view

International Nuclear Information System (INIS)

Roth, B.F.

1975-01-01

Nuclear power stations presently in operation in the Federal Republic of Germany have electricity generating costs between 3.5 Pf/kWh and 4.5 Pf/kWh. The higher electricity generating costs are due mainly to the increased expenditure required for the protection of plants against airplane crashes, earthquakes and sabotage, and to the higher costs of the entire fuel cycle. (orig./RW) [de

The asymptotic price of anarchy for k-uniform congestion games

NARCIS (Netherlands)

de Jong, Jasper; Kern, Walter; Steenhuisen, Berend; Uetz, Marc; Solis-Oba, Roberto

2018-01-01

We consider the atomic version of congestion games with affine cost functions, and analyze the quality of worst case Nash equilibria when the strategy spaces of the players are the set of bases of a k-uniform matroid. In this setting, for some parameter k, each player is to choose k out of a finite

Supply disruption cost for power network planning

International Nuclear Information System (INIS)

Kjoelle, G.H.

1992-09-01

A description is given of the method of approach to calculate the total annual socio-economic cost of power supply disruption and non-supplied energy, included the utilities' cost for planning. The total socio-economic supply disruption cost is the sum of the customers' disruption cost and the utilities' cost for failure and disruption. The mean weighted disruption cost for Norway for one hour disruption is NOK 19 per kWh. The customers' annual disruption cost is calculated with basis in the specific disruption cost referred to heavy load (January) and dimensioning maximum loads. The loads are reduced by factors taking into account the time variations of the failure frequency, duration, the loads and the disruption cost. 6 refs

Low Cost, High Efficiency, High Pressure Hydrogen Storage

Energy Technology Data Exchange (ETDEWEB)

Mark Leavitt

2010-03-31

A technical and design evaluation was carried out to meet DOE hydrogen fuel targets for 2010. These targets consisted of a system gravimetric capacity of 2.0 kWh/kg, a system volumetric capacity of 1.5 kWh/L and a system cost of $4/kWh. In compressed hydrogen storage systems, the vast majority of the weight and volume is associated with the hydrogen storage tank. In order to meet gravimetric targets for compressed hydrogen tanks, 10,000 psi carbon resin composites were used to provide the high strength required as well as low weight. For the 10,000 psi tanks, carbon fiber is the largest portion of their cost. Quantum Technologies is a tier one hydrogen system supplier for automotive companies around the world. Over the course of the program Quantum focused on development of technology to allow the compressed hydrogen storage tank to meet DOE goals. At the start of the program in 2004 Quantum was supplying systems with a specific energy of 1.1-1.6 kWh/kg, a volumetric capacity of 1.3 kWh/L and a cost of $73/kWh. Based on the inequities between DOE targets and Quantum’s then current capabilities, focus was placed first on cost reduction and second on weight reduction. Both of these were to be accomplished without reduction of the fuel system’s performance or reliability. Three distinct areas were investigated; optimization of composite structures, development of “smart tanks” that could monitor health of tank thus allowing for lower design safety factor, and the development of “Cool Fuel” technology to allow higher density gas to be stored, thus allowing smaller/lower pressure tanks that would hold the required fuel supply. The second phase of the project deals with three additional distinct tasks focusing on composite structure optimization, liner optimization, and metal.

GASIFICATION PLANT COST AND PERFORMANCE OPTIMIZATION

Energy Technology Data Exchange (ETDEWEB)

Samuel S. Tam

2002-05-01

The goal of this series of design and estimating efforts was to start from the as-built design and actual operating data from the DOE sponsored Wabash River Coal Gasification Repowering Project and to develop optimized designs for several coal and petroleum coke IGCC power and coproduction projects. First, the team developed a design for a grass-roots plant equivalent to the Wabash River Coal Gasification Repowering Project to provide a starting point and a detailed mid-year 2000 cost estimate based on the actual as-built plant design and subsequent modifications (Subtask 1.1). This unoptimized plant has a thermal efficiency of 38.3% (HHV) and a mid-year 2000 EPC cost of 1,681 $/kW. This design was enlarged and modified to become a Petroleum Coke IGCC Coproduction Plant (Subtask 1.2) that produces hydrogen, industrial grade steam, and fuel gas for an adjacent Gulf Coast petroleum refinery in addition to export power. A structured Value Improving Practices (VIP) approach was applied to reduce costs and improve performance. The base case (Subtask 1.3) Optimized Petroleum Coke IGCC Coproduction Plant increased the power output by 16% and reduced the plant cost by 23%. The study looked at several options for gasifier sparing to enhance availability. Subtask 1.9 produced a detailed report on this availability analyses study. The Subtask 1.3 Next Plant, which retains the preferred spare gasification train approach, only reduced the cost by about 21%, but it has the highest availability (94.6%) and produces power at 30 $/MW-hr (at a 12% ROI). Thus, such a coke-fueled IGCC coproduction plant could fill a near term niche market. In all cases, the emissions performance of these plants is superior to the Wabash River project. Subtasks 1.5A and B developed designs for single-train coal and coke-fueled power plants. This side-by-side comparison of these plants, which contain the Subtask 1.3 VIP enhancements, showed their similarity both in design and cost (1,318 $/kW for the

A minimum achievable PV electrical generating cost

International Nuclear Information System (INIS)

Sabisky, E.S.

1996-01-01

The role and share of photovoltaic (PV) generated electricity in our nation's future energy arsenal is primarily dependent on its future production cost. This paper provides a framework for obtaining a minimum achievable electrical generating cost (a lower bound) for fixed, flat-plate photovoltaic systems. A cost of 2.8 $cent/kWh (1990$) was derived for a plant located in Southwestern USA sunshine using a cost of money of 8%. In addition, a value of 22 $cent/Wp (1990$) was estimated as a minimum module manufacturing cost/price

Cost evaluation of radiation vulcanization of natural rubber latex

International Nuclear Information System (INIS)

Makuuchi, K.

2003-01-01

Cost of radiation vulcanized NR latex was evaluated. The plant would be built in an existing dipping factory in an industrial area in a Southeast Asian country. One thousands dry tons of NR latex are vulcanized with a low energy electron accelerator. The electron accelerator is a self-shielding low energy type. The maximum accelerating voltage is 300 kV and the output power is 10 kW. The total construction cost of the plant is $400,000 including electron accelerator and other equipments. Costs of raw materials and utilities are $1.165 and $0.023 per one kg of product, respectively. The fixed costs of the plant consist of labor costs, labor overhead, maintenance, plant overhead, depreciation, and bank interest. It is $0.190/kg of product. The company overhead for operation including company management, R and D and insurance is $0.044/kg of product. Thus, the total production cost is estimated to be $1.422/kg of product. (author)

UNIPEDE Group reassesses generating costs

International Nuclear Information System (INIS)

Anon.

1988-01-01

The latest UNIPEDE study on the economics of electricity generation finds that the depressed price of coal on world markets has eroded the cost advantage of nuclear power. However, the situation is found to vary significantly between countries. Tables are presented, showing the relative competitiveness of coal and nuclear plant for base load generation, using both individual national fuel cycle price assumptions and common assumptions for imported fuel costs. (U.K.)

Levelized cost of energy and sensitivity analysis for the hydrogen-bromine flow battery

Science.gov (United States)

Singh, Nirala; McFarland, Eric W.

2015-08-01

The technoeconomics of the hydrogen-bromine flow battery are investigated. Using existing performance data the operating conditions were optimized to minimize the levelized cost of electricity using individual component costs for the flow battery stack and other system units. Several different configurations were evaluated including use of a bromine complexing agent to reduce membrane requirements. Sensitivity analysis of cost is used to identify the system elements most strongly influencing the economics. The stack lifetime and round-trip efficiency of the cell are identified as major factors on the levelized cost of electricity, along with capital components related to hydrogen storage, the bipolar plate, and the membrane. Assuming that an electrocatalyst and membrane with a lifetime of 2000 cycles can be identified, the lowest cost market entry system capital is 220 kWh-1 for a 4 h discharge system and for a charging energy cost of 0.04 kWh-1 the levelized cost of the electricity delivered is 0.40 kWh-1. With systems manufactured at large scales these costs are expected to be lower.

A Comprehensive and Cost-Effective Computer Infrastructure for K-12 Schools

Science.gov (United States)

Warren, G. P.; Seaton, J. M.

1996-01-01

Since 1993, NASA Langley Research Center has been developing and implementing a low-cost Internet connection model, including system architecture, training, and support, to provide Internet access for an entire network of computers. This infrastructure allows local area networks which exceed 50 machines per school to independently access the complete functionality of the Internet by connecting to a central site, using state-of-the-art commercial modem technology, through a single standard telephone line. By locating high-cost resources at this central site and sharing these resources and their costs among the school districts throughout a region, a practical, efficient, and affordable infrastructure for providing scale-able Internet connectivity has been developed. As the demand for faster Internet access grows, the model has a simple expansion path that eliminates the need to replace major system components and re-train personnel. Observations of optical Internet usage within an environment, particularly school classrooms, have shown that after an initial period of 'surfing,' the Internet traffic becomes repetitive. By automatically storing requested Internet information on a high-capacity networked disk drive at the local site (network based disk caching), then updating this information only when it changes, well over 80 percent of the Internet traffic that leaves a location can be eliminated by retrieving the information from the local disk cache.

The cost of nuclear electricity: economic values and political calculations

International Nuclear Information System (INIS)

Stauffer, T.

1985-01-01

The subject is covered in sections: introduction (monetary inflation; US-style rate-base formula; cost escalation); electricity generation costs (rate-base calculation formula; regulatory versus economic costs; inflationary case; cost-of-service rates versus inflation; first year electricity costs); rate shock (A. comparison with oil; B. nuclear case; C. comparison with coal/nuclear system; vintaged electricity costs versus growth and inflation); conclusions. (U.K.)

Micro gas turbine thermodynamic and economic analysis up to 500 kWe size

International Nuclear Information System (INIS)

Galanti, Leandro; Massardo, Aristide F.

2011-01-01

Highlights: → Thermoeconomic analysis and optimization of micro gas turbines up to 500 kWe. → Analysis carried out for both regenerative and intercooled regenerative cycles. → Focus on thermodynamic, geometric and cost parameters of the main MGT devices. → ICR cycle has an interesting reduction in capital and electricity costs, rising size. → Complete thermoeconomic investigation is essential to support thermodynamic analysis. -- Abstract: In this paper a thermoeconomic analysis and optimization of micro gas turbines (MGT) up to 500 kWe is presented. This analysis is strongly related to the need of minimizing specific capital cost, still high for MGT large market penetration, and optimizing MGT size to match market needs. The analysis was carried out for both existing regenerative MGT cycles and new inter-cooled regenerative cycles, using the Web-based ThermoEconomic Modular Program by the University of Genoa. The attention is mainly focused on the basis of thermodynamic, geometric and capital cost parameters of the main MGT devices (such as recuperator size, material and effectiveness, turbine inlet temperature, and compressor pressure ratio) and on economic scenario (fuel cost, cost of electricity, etc.) for different MGT size in the range 25-500 kWe.

Estimating the cost of saving electricity through U.S. utility customer-funded energy efficiency programs

International Nuclear Information System (INIS)

Hoffman, Ian M.; Goldman, Charles A.; Rybka, Gregory; Leventis, Greg; Schwartz, Lisa; Sanstad, Alan H.; Schiller, Steven

2017-01-01

The program administrator and total cost of saved energy allow comparison of the cost of efficiency across utilities, states, and program types, and can identify potential performance improvements. Comparing program administrator cost with the total cost of saved energy can indicate the degree to which programs leverage investment by participants. Based on reported total costs and savings information for U.S. utility efficiency programs from 2009 to 2013, we estimate the savings-weighted average total cost of saved electricity across 20 states at $0.046 per kilowatt-hour (kW h), comparing favorably with energy supply costs and retail rates. Programs targeted on the residential market averaged $0.030 per kW h compared to $0.053 per kW h for non-residential programs. Lighting programs, with an average total cost of $0.018 per kW h, drove lower savings costs in the residential market. We provide estimates for the most common program types and find that program administrators and participants on average are splitting the costs of efficiency in half. More consistent, standardized and complete reporting on efficiency programs is needed. Differing definitions and quantification of costs, savings and savings lifetimes pose challenges for comparing program results. Reducing these uncertainties could increase confidence in efficiency as a resource among planners and policymakers. - Highlights: • The cost of saved energy allows comparisons among energy resource investments. • Findings from the most expansive collection yet of total energy efficiency program costs. • The weighted average total cost of saved electricity was $0.046 for 20 states in 2009–2013. • Averages in the residential and non-residential sectors were $0.030 and $0.053 per kW h, respectively. • Results strongly indicate need for more consistent, reliable and complete reporting on efficiency programs.

Evaluation framework for K-best sphere decoders

KAUST Repository

Shen, Chungan

2010-08-01

While Maximum-Likelihood (ML) is the optimum decoding scheme for most communication scenarios, practical implementation difficulties limit its use, especially for Multiple Input Multiple Output (MIMO) systems with a large number of transmit or receive antennas. Tree-searching type decoder structures such as Sphere decoder and K-best decoder present an interesting trade-off between complexity and performance. Many algorithmic developments and VLSI implementations have been reported in literature with widely varying performance to area and power metrics. In this semi-tutorial paper we present a holistic view of different Sphere decoding techniques and K-best decoding techniques, identifying the key algorithmic and implementation trade-offs. We establish a consistent benchmark framework to investigate and compare the delay cost, power cost, and power-delay-product cost incurred by each method. Finally, using the framework, we propose and analyze a novel architecture and compare that to other published approaches. Our goal is to explicitly elucidate the overall advantages and disadvantages of each proposed algorithms in one coherent framework. © 2010 World Scientific Publishing Company.

NIKHEF-K safety report 1982

International Nuclear Information System (INIS)

1983-12-01

In this safety report, general information is offered about the safety policy at the NIKHEF-K institute Amsterdam. Costs, prevention, training courses and inspection related to (radiation) safety are briefly discussed. Small accidents are reported. Some measurements have been carried out, but no measurable increase of radiation doses have been found. (Auth.)

The Cost of Cache-Oblivious Searching

DEFF Research Database (Denmark)

Bender, Michael A.; Brodal, Gert Stølting; Fagerberg, Rolf

2003-01-01

, multilevel memory hierarchies can be modelled. It is shown that as k grows, the search costs of the optimal k-level DAM search structure and of the optimal cache-oblivious search structure rapidly converge. This demonstrates that for a multilevel memory hierarchy, a simple cache-oblivious structure almost......Tight bounds on the cost of cache-oblivious searching are proved. It is shown that no cache-oblivious search structure can guarantee that a search performs fewer than lg e log B N block transfers between any two levels of the memory hierarchy. This lower bound holds even if all of the block sizes...... the random placement of the rst element of the structure in memory. As searching in the Disk Access Model (DAM) can be performed in log B N + 1 block transfers, this result shows a separation between the 2-level DAM and cacheoblivious memory-hierarchy models. By extending the DAM model to k levels...

Design study of wind turbines, 50 kW to 3000 kW for electric utility applications: Executive summary

Science.gov (United States)

1977-01-01

Preliminary designs of low power (50 to 500 kW) and high power (500 to 3000 kW) wind generator systems (WGS) for electric utility applications were developed. These designs provide the bases for detail design, fabrication, and experimental demonstration testing of these units at selected utility sites. Several feasible WGS configurations were evaluated, and the concept offering the lowest energy cost potential and minimum technical risk for utility applications was selected. The selected concept was optimized utilizing a parametric computer program prepared for this purpose. The utility requirements evaluation task examined the economic, operational and institutional factors affecting the WGS in a utility environment, and provided additional guidance for the preliminary design effort. Results of the conceptual design task indicated that a rotor operating at constant speed, driving an AC generator through a gear transmission is the most cost effective WGS configuration.

Sequential combination of k-t principle component analysis (PCA) and partial parallel imaging: k-t PCA GROWL.

Science.gov (United States)

Qi, Haikun; Huang, Feng; Zhou, Hongmei; Chen, Huijun

2017-03-01

k-t principle component analysis (k-t PCA) is a distinguished method for high spatiotemporal resolution dynamic MRI. To further improve the accuracy of k-t PCA, a combination with partial parallel imaging (PPI), k-t PCA/SENSE, has been tested. However, k-t PCA/SENSE suffers from long reconstruction time and limited improvement. This study aims to improve the combination of k-t PCA and PPI on both reconstruction speed and accuracy. A sequential combination scheme called k-t PCA GROWL (GRAPPA operator for wider readout line) was proposed. The GRAPPA operator was performed before k-t PCA to extend each readout line into a wider band, which improved the condition of the encoding matrix in the following k-t PCA reconstruction. k-t PCA GROWL was tested and compared with k-t PCA and k-t PCA/SENSE on cardiac imaging. k-t PCA GROWL consistently resulted in better image quality compared with k-t PCA/SENSE at high acceleration factors for both retrospectively and prospectively undersampled cardiac imaging, with a much lower computation cost. The improvement in image quality became greater with the increase of acceleration factor. By sequentially combining the GRAPPA operator and k-t PCA, the proposed k-t PCA GROWL method outperformed k-t PCA/SENSE in both reconstruction speed and accuracy, suggesting that k-t PCA GROWL is a better combination scheme than k-t PCA/SENSE. Magn Reson Med 77:1058-1067, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

Research on cost early warning of textile industry based on AC algorithm

Directory of Open Access Journals (Sweden)

Xiaolu Meng

2017-03-01

Full Text Available In recent years, the textile industry faces huge pressure domestically and internationally. With a small profit margin in the textile industry, it becomes very important to improve the economic efficiency and the cost management. Therefore, establishing an effective cost early warning system for the textile industry is necessary. The proposal of AC algorithm predicts the cost alert completely based on the historical data without estimating or assuming the future trend of the input variables in advance. Based on its advantages, the length of pattern (k is 2, 3, 4 or 5, and then we respectively build the cost early warning model. According to the results of comparison, the model with k =3 has the strongest predictive ability. The predictive error of the total cost is 1.8%, smaller than that of others. Then, this paper predicts the cost alert of the next five years by the model with k =3. The results show that the cost alert has certain volatility. Accordingly, we proposed some suggestions to cope with the crisis. This paper also provides references for the industry, government and relevant investors.

Economics for wind turbines in Denmark. Investments, operation and maintenance costs for selected vintages of turbines

International Nuclear Information System (INIS)

Hjuler Jensen, P.; Morthorst, P.E.; Skriver, S.; Rasmussen, M.; Larsen, H.; Hansen, L.H.; Nielsen, P.; Lemming, J.

2002-10-01

During the last two decades of operational experience with wind turbines in Denmark, a number of investigations on wind energy economics have been carried out on behalf of the Danish Energy Agency. The aim of this study has been to analyse the development of investments cost, O and M-cost, insurance costs etc. including the economic and technical lifetime of wind turbines. Based on a questionnaire and an existing database, time series for O and M-cost components are established going back to the early 80's. These time series are used to analyse the development of O and M-costs during the lifetime of different turbine sizes and vintages. A major issue of the project is to use the results achieved for older turbines (55kW to 150 kW) to establish an expected development of O and M-costs for newer larger turbines, typically of the 500kW to 750kW sizes. (au)

Comparative cost analyses: total flow vs other power conversion systems for the Salton Sea Geothermal Resource

Energy Technology Data Exchange (ETDEWEB)

Wright, G.W.

1978-09-18

Cost studies were done for Total Flow, double flash, and multistage flash binary systems for electric Energy production from the Salton Sea Geothermal Resource. The purpose was to provide the Department of energy's Division of Geothermal Energy with information by which to judge whether to continue development of the Total Flow system. Results indicate that the Total Flow and double flash systems have capital costs of $1,135 and $1,026 /kW with energy costs of 40.9 and 39.7 mills/kW h respectively. The Total Flow and double flash systems are not distinguishable on a cost basis alone; the multistage flash binary system, with capital cost of $1,343 /kW and energy cost of 46.9 mills/kW h, is significantly more expensive. If oil savings are considered in the total analysis, the Total Flow system could save 30% more oil than the double flash system, $3.5 billion at 1978 oil prices.

Cost-benefit analysis: reality or illusion

International Nuclear Information System (INIS)

Tait, G.W.C.

1980-01-01

The problems encountered in the application of cost-benefit analysis to the setting of acceptable radiation exposure levels are discussed, in particular the difficulty of assigning a monetary value to human life or disability, and the fact that the customary optimization of cost-benefit is not consistent with the ICRP dose limitation system, especially the ALARA principle. It is concluded that the present ICRP recommendations should remain the basis of exposure control while a carefully limited use of cost-benefit analysis may be helpful in some cases. (U.K.)

Nuclear energy: the real costs; and reply

International Nuclear Information System (INIS)

Jeffery, J.W.; Jones, P.M.S.

1982-01-01

Comments are made on a review by Jones (Atom. 306 April 1982) of 'Nuclear Energy: the Real Costs' - a special report by the Committee for the Study of the Economics of Nuclear Electricity, and criticisms contained in the review of the analysis of nuclear costs presented in the report are discussed. Dr Jones replies. (U.K.)

The Psychometrics of the Mini-K.

Science.gov (United States)

Richardson, George B; Chen, Ching-Chen; Dai, Chia-Liang; Brubaker, Michael D; Nedelec, Joseph L

2017-01-01

Many published studies have employed the Mini-K to measure a single fast-slow life history dimension. However, the internal structure of the Mini-K has not been determined and it is not clear that a single higher order K-factor fits the data. It is also not clear that the Mini-K is measurement invariant across groups such as the sexes. To establish the construct validity of K as well as the broader usefulness of applying life history theory to humans, it is crucial that these psychometric issues are addressed as a part of measure validation efforts. Here we report on three studies that used latent variable modeling and data drawn from two college student samples ( ns = 361 and 300) to elucidate the psychometrics of the Mini-K. We found that (a) the Mini-K had a six dimensional first-order structure, (b) the K-factor provided a parsimonious explanation of the associations among the lower order factors at no significant cost to fit, (c) the Mini-K measured the same K-factor across the sexes, (d) K-factor means did not have the same meaning across the sexes and thus the first-order factors should be used in studies of mean sex differences, and finally, (e) the K-factor was only associated with environment and aspects of mating competition in females. Implications and future directions for life history research are discussed.

The Social Costs of Electricity Generation—Categorising Different Types of Costs and Evaluating Their Respective Relevance

Directory of Open Access Journals (Sweden)

Sascha Samadi

2017-03-01

Full Text Available Various electricity generation technologies using different primary energy sources are available. Many published studies compare the costs of these technologies. However, most of those studies only consider plant-level costs and do not fully take into account additional costs that societies may face in using these technologies. This article reviews the literature on the costs of electricity generation technologies, aiming to determine which types of costs are relevant from a societal point of view when comparing generation technologies. The paper categorises the relevant types of costs, differentiating between plant-level, system and external costs as the main categories. It discusses the relevance of each type of cost for each generation technology. The findings suggest that several low-carbon electricity generation technologies exhibit lower social costs per kWh than the currently dominant technologies using fossil fuels. More generally, the findings emphasise the importance of taking not only plant-level costs, but also system and external costs, into account when comparing electricity generation technologies from a societal point of view. The article intends to inform both policymakers and energy system modellers, the latter who may strive to include all relevant types of costs in their models.

Nuclear Insurance Subsidies Cost from Post-Fukushima Accounting Based on Media Sources

Directory of Open Access Journals (Sweden)

John J. Laureto

2016-12-01

Full Text Available Quantification of nuclear liability insurance is difficult without arbitrary liability caps; however, post-mortem calculations can be used to calculate insurance costs. This study analyzes the Fukushima (Daiichi nuclear power plant disaster to quantify the cost per unit electricity ($/kWh of nuclear energy from the lifetime of the plant after accounting for the true cost of the liability needed to cover the damages from the nuclear disaster determined from news reports. These costs are then compared to the cost of electricity currently paid by Japanese consumers, and then are aggregated to determine the indirect subsidy for nuclear power providers in both Japan and the USA. The results show that the reported costs of the Fukushima nuclear disaster are $20–525 billion, which results in a real insurance cost from the lifetime of electricity produced at the plants between $0.22–5.78/kWh. These values are far higher than the current insurance costs by Japanese law of $0.01/kWh and even the total costs consumers pay for electricity. Although the spread in the input costs is large and the reported metrics are incomplete, the nuclear insurance subsidy is clearly substantial in Japan and in the USA. Ideally, energy sources should be economically sustainable without the need for a government insurance subsidy. For the electricity market to function effectively and efficiently in all other countries using nuclear power, the insurance costs should be reported accurately and included in nuclear electricity costs without arbitrary government liability caps.

Social costs and benefits of nuclear futures

International Nuclear Information System (INIS)

Pearce, D.

1979-01-01

The conceptual framework for evaluating which energy path is chosen is one of trading-off costs and benefits in a world of technological, economic and social uncertainty. The translation of this conceptual framework into an analytical format with empirical relevance is dealt with. Some salient features of cost benefit analysis are discussed. Actual costs and benefits of nuclear futures are then considered. Subjects discussed are: routine and non-routine radiation, waste management, proliferation, and civil liberties. A 'regret' matrix is presented showing the cost to any future generation if a decision on nuclear power is made now. (U.K.)

The potential impact of ozone on materials in the U.K.

Science.gov (United States)

Lee, David S.; Holland, Michael R.; Falla, Norman

Recent reports have highlighted the potential damage caused to a range of media, including materials, by ozone (O 3). The limited data available indicate significant damage to rubber products and surface coatings but either insignificant or unquantifiable damage to textiles and other polymeric materials at the range of atmospheric concentrations encountered in the U.K. Materials in the indoor environment have been excluded from economic analyses. Legislation was put in place in 1993 in the U.K. in order to reduce NO x (NO x = NO + NO 2) and VOC (volatile organic compounds) emissions from motor vehicles which is likely to result in reduced peak O 3 episodes but increased average levels of O 3 in urban areas which may result in increased damage to materials. A detailed assessment of the costs of O 3 damage to materials is not currently possible because of insufficient information on relevant dose-response functions and the stock at risk. Alternative methods were thus adopted to determine the potential scale of the problem. Scaling of U.S. estimates made in the late 1960s provides a range for the U.K. of £170 million-£345 million yr -1 in current terms. This includes damage to surface coatings and elastomers, and the cost of antiozonant protection applied to rubber goods. Independent estimates were made of the costs of protecting rubber goods in the U.K. These were based on the size of the antiozonant market, and provide cost ranges of £25 million-£63 million yr -1 to manufacturers and £25 million-£189 million yr -1 to consumers. The only rubber goods for which a damage estimate (not including protection costs) could be made were tyres, using data from the U.S.A. and information on annual tyre sales in the U.K. A range of £0-£4 million yr -1 was estimated. The cost of damage to other rubber goods could not be quantified because of a lack of data on both the stock at risk and exposure-response functions. The effect of O 3 on the costs of repainting were

The costs of nuclear power in the Netherlands

International Nuclear Information System (INIS)

1978-01-01

A study on the costs of nuclear power generation in the Netherlands is presented. Light water cooled reactors are chosen as nuclear power plants and no difference is made in calculating the costs between a PWR type reactor and a BWR type reactor. The power plants have an output of 1000 MWe. From each part of the whole fuel cycle the costs are determined, taking into account interest, investments, time of construction, labor costs, insurances etc. Also are determined from each part of the fuel cycle the energy costs; the costs per kWh. Finally a comparison is made in costs between a 1000 MWe power plant and a 600 MWe power plant

Economic costs of electricity production in Poland

International Nuclear Information System (INIS)

Beeldman, M.; Solinski, J.

1994-02-01

This study presents a methodology for the calculation of the economic costs of the production of electricity. This methodology is applied to assess electricity production cost in Poland by type of power station for the years 1995 and 2000. In addition, an overview is presented of the methods used by the OECD countries, particularly in the Netherlands. The main conclusions of the study are: 1) the real economic costs to generate electricity in Poland are about two times higher compared with the traditional book-keeping data; 2) the investment costs will become the most important cost component in the near future; and 3) there are considerables differences in production cost per kWh for the different types of power plants in Poland. 4 appendices, 14 refs

Thermal and nuclear power generation cost estimates using corporate financial statements

International Nuclear Information System (INIS)

Matsuo, Yuhji; Nagatomi, Yu; Murakami, Tomoko

2012-01-01

There are two generally accepted methods for estimating power generation costs: so-called 'model plant' method and the method using corporate financial statements. The method using corporate financial statements, though under some constraints, can provide useful information for comparing thermal and nuclear power generation costs. This study used this method for estimating thermal and nuclear power generation costs in Japan for the past five years, finding that the nuclear power generation cost remained stable at around 7 yen per kilowatt-hour (kWh) while the thermal power generation cost moved within a wide range of 9 to 12 yen/kWh in line with wild fluctuations in primary energy prices. The cost of nuclear power generation is expected to increase due to the enhancement of safety measures and accident damage compensation in the future, while there are reactor decommissioning, backend and many other costs that the financial statement-using approach cannot accurately estimate. In the future, efforts should be continued to comprehensively and accurately estimate total costs. (author)

*K-means and cluster models for cancer signatures.

Science.gov (United States)

Kakushadze, Zura; Yu, Willie

2017-09-01

We present *K-means clustering algorithm and source code by expanding statistical clustering methods applied in https://ssrn.com/abstract=2802753 to quantitative finance. *K-means is statistically deterministic without specifying initial centers, etc. We apply *K-means to extracting cancer signatures from genome data without using nonnegative matrix factorization (NMF). *K-means' computational cost is a fraction of NMF's. Using 1389 published samples for 14 cancer types, we find that 3 cancers (liver cancer, lung cancer and renal cell carcinoma) stand out and do not have cluster-like structures. Two clusters have especially high within-cluster correlations with 11 other cancers indicating common underlying structures. Our approach opens a novel avenue for studying such structures. *K-means is universal and can be applied in other fields. We discuss some potential applications in quantitative finance.

Permanent magnet design for magnetic heat pumps using total cost minimization

Science.gov (United States)

Teyber, R.; Trevizoli, P. V.; Christiaanse, T. V.; Govindappa, P.; Niknia, I.; Rowe, A.

2017-11-01

The active magnetic regenerator (AMR) is an attractive technology for efficient heat pumps and cooling systems. The costs associated with a permanent magnet for near room temperature applications are a central issue which must be solved for broad market implementation. To address this problem, we present a permanent magnet topology optimization to minimize the total cost of cooling using a thermoeconomic cost-rate balance coupled with an AMR model. A genetic algorithm identifies cost-minimizing magnet topologies. For a fixed temperature span of 15 K and 4.2 kg of gadolinium, the optimal magnet configuration provides 3.3 kW of cooling power with a second law efficiency (ηII) of 0.33 using 16.3 kg of permanent magnet material.

Cross Sections for the Reactions e+e to K+ K- pi+pi-, K+ K- pi0pi0, and K+ K- K+ K- Measured Using Initial-State Radiation

Energy Technology Data Exchange (ETDEWEB)

Lees, J.P.; Poireau, V.; Prencipe, E.; Tisserand, V.; /Annecy, LAPP; Garra Tico, J.; Grauges, E.; /Barcelona U., ECM; Martinelli, M.; /INFN, Trieste /Trieste U.; Milanes, D.A.; /INFN, Trieste /Trieste U.; Palano, A.; /INFN, Trieste /Trieste U.; Pappagallo, M.; /INFN, Trieste /Trieste U. /INFN, Bari /Bari U. /Bari U. /INFN, Bari; Eigen, G.; Stugu, B.; Sun, L.; /Bergen U.; Brown, D.N.; Kerth, L.T.; Kolomensky, Yu.G.; Lynch, G.; Osipenkov, I.L.; /LBL, Berkeley /UC, Berkeley; Koch, H.; Schroeder, T.; /Ruhr U., Bochum; Asgeirsson, D.J.; /British Columbia U. /Brunel U. /Novosibirsk, IYF /UC, Irvine /UC, Riverside /UC, Santa Barbara /UC, Santa Cruz /Caltech /Cincinnati U. /Colorado U. /Colorado State U. /Dortmund U. /Dresden, Tech. U. /Ecole Polytechnique /Edinburgh U. /INFN, Trieste /INFN, Trieste /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Ferrara /Ferrara U. /Frascati /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Genoa /Genoa U. /Indian Inst. Tech., Guwahati /Harvard U. /Harvey Mudd Coll. /Heidelberg U. /Humboldt U., Berlin /Imperial Coll., London /Iowa State U. /Iowa State U. /Johns Hopkins U. /Orsay, LAL /LLNL, Livermore /Liverpool U. /Queen Mary, U. of London /Royal Holloway, U. of London /Louisville U. /Mainz U., Inst. Kernphys. /Manchester U., Comp. Sci. Dept. /Maryland U. /Massachusetts U., Amherst /MIT /McGill U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Milan /Milan U. /Mississippi U. /Montreal U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Naples /Naples U. /NIKHEF, Amsterdam /Notre Dame U. /Ohio State U. /Oregon U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Trieste /INFN, Trieste /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Padua /Padua U. /Paris U., VI-VII /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Perugia /Perugia U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Pisa /Princeton U. /INFN, Trieste /INFN, Trieste /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /INFN, Trieste /INFN, Trieste /INFN, Rome /Rome U. /Rostock U. /Rutherford /DAPNIA, Saclay /SLAC /South Carolina U. /Southern Methodist U. /Stanford U., Phys. Dept. /SUNY, Albany /Tel Aviv U. /Tennessee U. /Texas U. /Texas U., Dallas /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Turin /Turin U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /INFN, Trieste /Trieste U. /Valencia U., IFIC /Victoria U. /Warwick U. /Wisconsin U., Madison

2011-08-19

We study the processes e{sup +}e{sup -} {yields} K{sup +}K{sup -}{pi}{sup +}{pi}-{gamma}, K{sup +}K{sup -}{pi}{sup 0}{pi}{sup 0}{gamma}, and K{sup +}K{sup -}K{sup +}K{sup -}{gamma}, where the photon is radiated from the initial state. About 84000, 8000, and 4200 fully reconstructed events, respectively, are selected from 454 fb{sup -1} of BABAR data. The invariant mass of the hadronic final state defines the e{sup +}e{sup -} center-of-mass energy, so that the K{sup +}K{sup -}{pi}{sup +}{pi}{sup -}{gamma} data can be compared with direct measurements of the e{sup +}e{sup -} {yields} K{sup +}K{sup -}{pi}{sup +}{pi}{sup -} reaction. No direct measurements exist for the e{sup +}e{sup -} {yields} K{sup +}K{sup -}{pi}{sup 0}{pi}{sup 0} or e{sup +}e{sup -} {yields} K{sup +}K{sup -}K{sup +}K{sup -} reactions, and we present an update of our previous result with doubled statistics. Studying the structure of these events, we find contributions from a number of intermediate states, and extract their cross sections. In particular, we perform a more detailed study of the e{sup +}e{sup -} {yields} {phi}(1020){pi}{pi}{gamma} reaction, and confirm the presence of the Y (2175) resonance in the {phi}(1020)f{sub 0}(980) and K{sup +}K{sup -} f{sub 0}(980) modes. In the charmonium region, we observe the J/{psi} in all three final states and in several intermediate states, as well as the {phi}(2S) in some modes, and measure the corresponding branching fractions.

Calculation of investment cost and electricity tariff on first building of Nuclear power plant in Indonesia

International Nuclear Information System (INIS)

Mochamad Nasrullah; Sudi Arianto

2005-01-01

Nuclear power plant as one alternative power plant for Indonesia is expected to attract interest of investors to invest in electricity sector. Calculation of investment cost and electricity tariff is a nearly necessary Information needed by investors. Spread sheet calculations on construction cost including Interest During Construction and escalation as well as financial viability are implemented. Result of the study show that overnight cost before escalation is US $ 2.682.865.200,- and after IDC and escalation it becomes US $ 3.795.712.088 or 1.807,5 US$/k We. Levelized Tariff is at around 4,57 cents/kWh. Levelized Tariff is 3,5 cents/kWh not feasible to the project of because all financial parameter show negative value. The project is financially feasible if calculated levelized tariff within arrange of 4,0 cents/kWh-5,5 cents/kWh. The most profitable tariff for investor is within arrange of 4,87 cents/kWh - 5,11 cents/kWh. (author)

Estimation of Outage Capacity for Free Space Optical Links Over I-K and K Turbulent Channels

Directory of Open Access Journals (Sweden)

D. Marinos

2011-06-01

Full Text Available The free space optical communication systems are attracting great research and commercial interest due to their capability of transferring data, over short distances, with high rate and security, low cost demands and without licensing fees. However, their performance depends strongly on the atmospheric conditions in the link’s area. In this work, we investigate the influence of the turbulence on the outage capacity of such a system for weak to strong turbulence channels modeled by the I-K and the K-distribution and we derive closed-form expressions for its estimation. Finally, using these expressions we present numerical results for various link cases with different turbulence conditions.

Cost probability analysis of reprocessing spent nuclear fuel in the US

International Nuclear Information System (INIS)

Recktenwald, G.D.; Deinert, M.R.

2012-01-01

The methods by which nuclear power's radioactive signature could be reduced typically require the reprocessing of spent nuclear fuel. However, economic assessments of the costs that are associated with doing this are subject to a high degree of uncertainty. We present a probabilistic analysis of the costs to build, operate and decommission the facilities that would be required to reprocess all US spent nuclear fuel generated over a one hundred year time frame, starting from a 2010 power production rate. The analysis suggests a total life-cycle cost of 2.11 ± 0.26 mills/kWh, with a 90% and 99% confidence that the overall cost would remain below 2.45 and 2.75 mills/kWh respectively. The most significant effects on cost come from the efficiency of the reactor fleet and the growth rate of nuclear power. The analysis shows that discounting results in life-cycle costs decreasing as recycling is delayed. However the costs to store spent fuel closely counter the effect of discounting when an intergenerational discount rate is used.

Impact of solar energy cost on water production cost of seawater desalination plants in Egypt

International Nuclear Information System (INIS)

Lamei, A.; Zaag, P. van der; Munch, E.

2008-01-01

Many countries in North Africa and the Middle East are experiencing localized water shortages and are now using desalination technologies with either reverse osmosis (RO) or thermal desalination to overcome part of this shortage. Desalination is performed using electricity, mostly generated from fossil fuels with associated greenhouse gas emissions. Increased fuel prices and concern over climate change are causing a push to shift to alternative sources of energy, such as solar energy, since solar radiation is abundant in this region all year round. This paper presents unit production costs and energy costs for 21 RO desalination plants in the region. An equation is proposed to estimate the unit production costs of RO desalination plants as a function of plant capacity, price of energy and specific energy consumption. This equation is used to calculate unit production costs for desalinated water using photovoltaic (PV) solar energy based on current and future PV module prices. Multiple PV cells are connected together to form a module or a panel. Unit production costs of desalination plants using solar energy are compared with conventionally generated electricity considering different prices for electricity. The paper presents prices for both PV and solar thermal energy. The paper discusses at which electricity price solar energy can be considered economical to be used for RO desalination; this is independent of RO plant capacity. For countries with electricity prices of 0.09 US$/kWh, solar-generated electricity (using PV) can be competitive starting from 2 US$/W p (W p is the number of Watts output under standard conditions of sunlight). For Egypt (price of 0.06 US$/kWh), solar-generated electricity starts to be competitive from 1 US$/W p . Solar energy is not cost competitive at the moment (at a current module price for PV systems including installation of 8 US$/W p ), but advances in the technology will continue to drive the prices down, whilst penalties on usage

Design study of wind turbines 50 kW to 3000 kW for electric utility applications: Analysis and design

Science.gov (United States)

1976-01-01

In the conceptual design task, several feasible wind generator systems (WGS) configurations were evaluated, and the concept offering the lowest energy cost potential and minimum technical risk for utility applications was selected. In the optimization task, the selected concept was optimized utilizing a parametric computer program prepared for this purpose. In the preliminary design task, the optimized selected concept was designed and analyzed in detail. The utility requirements evaluation task examined the economic, operational, and institutional factors affecting the WGS in a utility environment, and provided additional guidance for the preliminary design effort. Results of the conceptual design task indicated that a rotor operating at constant speed, driving an AC generator through a gear transmission is the most cost effective WGS configuration. The optimization task results led to the selection of a 500 kW rating for the low power WGS and a 1500 kW rating for the high power WGS.

Procurement Contracting Officer’s Guide to Cost Accounting Standards,

Science.gov (United States)

1977-09-01

ACCESSION MO r P.R0CUR2K2NT CONTRACTING ^FFICDR’S %UID2 TO COST ACCOUNTING STANDARDS. .-IB’ i 4fiSj irPBVPWra ONOANIZATION NAME MB AOONESS...discussing the history and development of Cost Accounting Standards, the functions of the Cost Accounting Standards Board, and the methodology...20. Abstract (continued) the tasks that Cost Accounting Standards have placed on the procurement officer. 3y understanding these tasks the

Development of a low cost integrated 15 kW A.C. solar tracking sub-array for grid connected PV power system applications

Science.gov (United States)

Stern, M.; West, R.; Fourer, G.; Whalen, W.; Van Loo, M.; Duran, G.

1997-02-01

Utility Power Group has achieved a significant reduction in the installed cost of grid-connected PV systems. The two part technical approach focused on 1) The utilization of a large area factory assembled PV panel, and 2) The integration and packaging of all sub-array power conversion and control functions within a single factory produced enclosure. Eight engineering prototype 15kW ac single axis solar tracking sub-arrays were designed, fabricated, and installed at the Sacramento Municipal Utility District's Hedge Substation site in 1996 and are being evaluated for performance and reliability. A number of design enhancements will be implemented in 1997 and demonstrated by the field deployment and operation of over twenty advanced sub-array PV power systems.

Cost estimate for electrostatically plugged cusp reactor

International Nuclear Information System (INIS)

Dolan, T.J.

1977-01-01

A preliminary design of an electrostatically plugged cusp reactor was presented in (UCRL-52142(1976)). The capital costs of the various components of this reactor are estimated and totaled for two different blanket configurations: one having an energy multiplication factor M = 1.2, and the other having M = 1.68. The unoptimized direct capital costs for these cases are found to be about 1400 and 950 $/kWe, respectively

Performance of the 10kV, 100-kA pulsed-power modules for the FRX-C magnetic compression experiment

International Nuclear Information System (INIS)

Rej, D.J.; Waganaar, W.J.

1989-01-01

In this paper, we present detailed performance data collected from over a year's operation of the 25 and 50-kJoule pulsed-power capacitor-bank modules developed for the Los Alamos magnetic fusion facility FRX-C. These modules supply the 5-MA magnet current needed for the compressional heating of compact toroid plasmoids. To date, 54 modules have been built and successfully tested at their full design rating: 100-kA peak output current at 10-kV charge, τ 1/4 = 60 μs (25-kJ module), or 110 μs (50-kJ module), crowbar L/R ≤ 1 ms. Modules are compact, cost about $5000 each, and though designed for 25 or 50 kJ, they can be easily modified for other pulsed-power applications. Energy is stored in 25-kJ capacitors. Start and crowbar switching is performed with a pair of water-cooled, size-D ignitrons. As an alternative to an ignitron, crowbar switching by solid-state rectifiers has been successfully demonstrated. Current is conducted between components and to the load by parallel-plate transmission lines and by a parallel array of commercially-available coaxial cable. 4 refs., 8 figs

Knee point search using cascading top-k sorting with minimized time complexity.

Science.gov (United States)

Wang, Zheng; Tseng, Shian-Shyong

2013-01-01

Anomaly detection systems and many other applications are frequently confronted with the problem of finding the largest knee point in the sorted curve for a set of unsorted points. This paper proposes an efficient knee point search algorithm with minimized time complexity using the cascading top-k sorting when a priori probability distribution of the knee point is known. First, a top-k sort algorithm is proposed based on a quicksort variation. We divide the knee point search problem into multiple steps. And in each step an optimization problem of the selection number k is solved, where the objective function is defined as the expected time cost. Because the expected time cost in one step is dependent on that of the afterwards steps, we simplify the optimization problem by minimizing the maximum expected time cost. The posterior probability of the largest knee point distribution and the other parameters are updated before solving the optimization problem in each step. An example of source detection of DNS DoS flooding attacks is provided to illustrate the applications of the proposed algorithm.

Are renewables portfolio standards cost-effective emission abatement policy?

Science.gov (United States)

Dobesova, Katerina; Apt, Jay; Lave, Lester B

2005-11-15

Renewables portfolio standards (RPS) could be an important policy instrument for 3P and 4P control. We examine the costs of renewable power, accounting for the federal production tax credit, the market value of a renewable credit, and the value of producing electricity without emissions of SO2, NOx, mercury, and CO2. We focus on Texas, which has a large RPS and is the largest U.S. electricity producer and one of the largest emitters of pollutants and CO2. We estimate the private and social costs of wind generation in an RPS compared with the current cost of fossil generation, accounting for the pollution and CO2 emissions. We find that society paid about 5.7 cent/kWh more for wind power, counting the additional generation, transmission, intermittency, and other costs. The higher cost includes credits amounting to 1.1 cent/kWh in reduced SO2, NOx, and Hg emissions. These pollution reductions and lower CO2 emissions could be attained at about the same cost using pulverized coal (PC) or natural gas combined cycle (NGCC) plants with carbon capture and sequestration (CCS); the reductions could be obtained more cheaply with an integrated coal gasification combined cycle (IGCC) plant with CCS.

Cost benefit analysis for optimization of radiation protection

International Nuclear Information System (INIS)

Lindell, B.

1984-01-01

ICRP recommends three basic principles for radiation protection. One is the justification of the source. Any use of radiation should be justified with regard to its benefit. The second is the optimization of radiation protection, i.e. all radiation exposure should be kept as low as resonably achievable. And the third principle is that there should be a limit for the radiation dose that any individual receives. Cost benefit assessment or cost benefit analysis is one tool to achieve the optimization, but the optimization is not identical with cost benefit analysis. Basically, in principle, the cost benefit analysis for the optimization of radiation protection is to find the minimum sum of the cost of protection and some cost of detriment. (Mori, K.)

Performance and Potential Study of 10kW Wind Turbine Generator for 6 Cities in Malaysia

Directory of Open Access Journals (Sweden)

Mustaqimah Mustaqimah

2013-04-01

Full Text Available ABSTRACT. This study presents an analysis of the optimization by using HOMER software and financial viability of 10 kW wind turbine generator (WTG through grid connected system for six different locations in Malaysia (Mersing, Kuching, K.Trengganu, Kudat, Melaka and Labuan. Assessment criteria comprised Total Net Present Cost (TNPC, and Cost of Energy ( COE . The HOMER ( National Renewable Energy laboratory, US was utilized as the assessment tool with modeling performed with hourly load data input from six cities in Malaysia. The results demonstrate that WTG has the potential to supply significant power for small scale load in conjunction with the grid-electricity supply. Optimization modeling demonstrated that the TNPC for grid connected configuration is Mersing for the lowest TNPC among the other cities which is TNPC recorded at $ -28,436 and initial cost is about $ 20,000. This mean wind grid system in Mersing is very benefit be built and reduction in greenhouse gas emission of 9,452 kg/yr. Optimization modeling also showed that Mersing is the only one among other city had showed a high potential of WTG which produced energy at 85,326 kWh/yr and purchase grid only at 4,082 kWh/year. Kajian Kinerja dan Potensi Generator Turbin Angin 10kW untuk 6 kota di Malaysia ABSTRAK. Penelitian ini menyajikan analisis optimasi dengan menggunakan software HOMER dan kesesuaian biaya untuk generator turbin angin (wind turbine generator=WTG 10 kW sistem grid untuk enam lokasi yang berbeda di Malaysia (Mersing, Kuching, K.Trengganu, Kudat, Melaka dan Labuan. Kriteria penilaian terdiri Total Net Present Cost (TNPC dan Cost of Energy (COE. software HOMER (National Renewable Energy laboratory, US digunakan sebagai pemodelan dengan memasukkan data beban daya per jam dari enam kota tersebut. Hasil penelitian menunjukkan bahwa generator turbin angin (WTG memiliki potensi untuk memasok daya yang signifikan untuk beban kecil dalam hubungannya dengan pasokan grid

Design of cascaded low cost solar cell with CuO substrate

Energy Technology Data Exchange (ETDEWEB)

Samson, Mil' shtein; Anup, Pillai; Shiv, Sharma; Garo, Yessayan [Advanced Electronic Technology Center, ECE Dept., University of Massachusetts, Lowell, MA-01851 (United States)

2013-12-04

For many years the main focus of R and D in solar cells was the development of high-efficiency solar convertors. However with solar technology beginning to be a part of national grids and stand-alone power supplies for variety of individual customers, the emphasis has changed, namely, the cost per kilowatt- hour (kW-hr) started to be an important figure of merit. Although Si does dominate the market of solar convertors, this material has total cost of kilowatt-hour much higher than what the power grid is providing presently to customers. It is well known that the cost of raw semiconductor material is a major factor in formulation of the final cost of a solar cell. That motivated us to search and design a novel solar cell using cheap materials. The new p-i-n solar cell consists of hetero-structure cascade of materials with step by step decreasing energy gap. Since the lattice constant of these three materials do differ not more than 2%, the more expensive epitaxial fabrication methods can be used as well. It should be emphasized that designed solar cell is not a cascade of three solar cells connected in series. Our market study shows that Si solar panel which costs $250–400 / m{sup 2} leads to a cost of $0.12–0.30 / kW-hr. To the contrary, CuO based solar cells with Cadmium compounds on top, would cost $100 / m{sup 2}. This will allow the novel solar cell to produce electricity at a cost of $0.06–0.08 / kW-hr.

The cost of nuclear electricity in France over the last ten years

International Nuclear Information System (INIS)

Moynet, G.

1984-01-01

The author analyzes developments for the main components in production costs of the nuclear kWh over the past ten years: investment, operation, fuel. Progression is 93% expressed in constant currency unit. But to assess this prima facie impressive figure correctly, it should be realised that the cost of the coal kWh has risen by more than 100% over the same period. The author comments on the main factors in this development [fr

Additional functions of remotely read kWh-meters

Energy Technology Data Exchange (ETDEWEB)

Koponen, P [VTT Energy, Espoo (Finland); Vehvilaeinen, S [Mittrix Oy (Finland); Rantanen, J [Helsinki Energy Board (Finland)

1998-08-01

In this chapter the possibilities to include new applications into remotely read smart kWh-meters are considered. New electronic meters can measure various electric quantities and have some extra calculating capacity. So they can be used to provide functions that distribution automation and the customer need and thus share the costs. Some applications like monitoring the state of the distribution network or locating faults are only for the utility, but many applications also need an interface to the customers or their automation systems. Among those are monitoring the quality of electricity, estimating load curves, applying dynamic tariffs and selling electricity and accounting. As a special item, the continuous monitoring of the quality of electricity is discussed. This includes voltage levels, total distortion, asymmetry and so on. If such a kWh-meter indicates quality problems it is possible to go there with a portable quality meter that is suitable for the case and inspect the situation. The poor quality can be detected before it causes harm to equipment owned by the customers or the power distribution company. This article also presents a prototype of such a quality monitoring kWh-meter. Dynamic tariffs and free electricity markets require two way communication with the utility and the customer and measurement of the time variations of the energy consumption. The customers or their energy management system must receive the energy prices from the utility and calculate the energy costs and decide upon the energy consumption control actions. Some alternative ways to meet these customer interface requirements are compared. Remote reading of kWh-meters requires a certain investment in meters and their data communication with the utility. Because smart meters can have some additional memory and calculating capacity and are capable of measuring various electric quantities, it is possible to share the costs with other applications that use the same hardware and data

Why have connection costs soared so dramatically?

International Nuclear Information System (INIS)

Bahjejian, L.

2012-01-01

Thousands of small photovoltaic power stations are demanding their connection to the national power grid. ERDF, the manager of the grid, has to adapt and reinforce some lines. The connection costs that were previously supported by the consumers has to be paid by the demander as the law NOME stipulates it. For installations below 18 kVA the cost ranges from 800 to 1600 euros and for more powerful installations an estimate has to be drawn by ERDF and the cost will depends on the presence or not of an adequate transformer in the vicinity, on the possible upgrading of the transformer, on the length of the cables necessary to make the connection and on whether the installation is in an urban area or not. A table gives the ERDF tariffs for the connection and the case of the connection of a 35 kVA station built on the roof of a shed in a rural zone is dealt with. The procedure to follow for demanding the connection to ERDF is detailed. (A.C.)

Multi-Stage Transportation Problem With Capacity Limit

OpenAIRE

I. Brezina; Z. Čičková; J. Pekár; M. Reiff

2010-01-01

The classical transportation problem can be applied in a more general way in practice. Related problems as Multi-commodity transportation problem, Transportation problems with different kind of vehicles, Multi-stage transportation problems, Transportation problem with capacity limit is an extension of the classical transportation problem considering the additional special condition. For solving such problems many optimization techniques (dynamic programming, linear programming, special algor...

Design and fabrication of a low-cost Darrieus vertical-axis wind-turbine system, volume 2

Science.gov (United States)

1983-03-01

The fabrication, installation, and checkout of 100-kW 17 meter vertical axis wind turbines is described. Turbines are Darrieus-type VAWIs with rotors 17 meters and 25.15 meters in height. They can produce 100 kW of electric power at a cost of energy as low as 3 cents per kWh, in an 18-mph wind regime using 12% annualized costs. Four turbines were produced; three are installed and are operable. Contract results are documented.

Benefits and costs of ecological restoration: Rapid assessment of changing ecosystem service values at a U.K. wetland.

Science.gov (United States)

Peh, Kelvin S-H; Balmford, Andrew; Field, Rob H; Lamb, Anthony; Birch, Jennifer C; Bradbury, Richard B; Brown, Claire; Butchart, Stuart H M; Lester, Martin; Morrison, Ross; Sedgwick, Isabel; Soans, Chris; Stattersfield, Alison J; Stroh, Peter A; Swetnam, Ruth D; Thomas, David H L; Walpole, Matt; Warrington, Stuart; Hughes, Francine M R

2014-10-01

Restoration of degraded land is recognized by the international community as an important way of enhancing both biodiversity and ecosystem services, but more information is needed about its costs and benefits. In Cambridgeshire, U.K., a long-term initiative to convert drained, intensively farmed arable land to a wetland habitat mosaic is driven by a desire both to prevent biodiversity loss from the nationally important Wicken Fen National Nature Reserve (Wicken Fen NNR) and to increase the provision of ecosystem services. We evaluated the changes in ecosystem service delivery resulting from this land conversion, using a new Toolkit for Ecosystem Service Site-based Assessment (TESSA) to estimate biophysical and monetary values of ecosystem services provided by the restored wetland mosaic compared with the former arable land. Overall results suggest that restoration is associated with a net gain to society as a whole of $199 ha(-1)y(-1), for a one-off investment in restoration of $2320 ha(-1). Restoration has led to an estimated loss of arable production of $2040 ha(-1)y(-1), but estimated gains of $671 ha(-1)y(-1) in nature-based recreation, $120 ha(-1)y(-1) from grazing, $48 ha(-1)y(-1) from flood protection, and a reduction in greenhouse gas (GHG) emissions worth an estimated $72 ha(-1)y(-1). Management costs have also declined by an estimated $1325 ha(-1)y(-1). Despite uncertainties associated with all measured values and the conservative assumptions used, we conclude that there was a substantial gain to society as a whole from this land-use conversion. The beneficiaries also changed from local arable farmers under arable production to graziers, countryside users from towns and villages, and the global community, under restoration. We emphasize that the values reported here are not necessarily transferable to other sites.

Nuclear and coal-fired power plant capital costs 1978 -June 1981

International Nuclear Information System (INIS)

Harbour, R.T.

1981-07-01

This bibliography covers 16 papers dealing with the economics of power generation - mainly comparisons between the capital costs of nuclear and coal fired plants. Some of the papers additionally discuss fuel, operating and maintenance costs, and performance. (U.K.)

Bevacizumab for Metastatic Colorectal Cancer: A Global Cost-Effectiveness Analysis.

Science.gov (United States)

Goldstein, Daniel A; Chen, Qiushi; Ayer, Turgay; Chan, Kelvin K W; Virik, Kiran; Hammerman, Ariel; Brenner, Baruch; Flowers, Christopher R; Hall, Peter S

2017-06-01

In the U.S., the addition of bevacizumab to first-line chemotherapy in metastatic colorectal cancer (mCRC) has been demonstrated to provide 0.10 quality-adjusted life years (QALYs) at an incremental cost-effectiveness ratio (ICER) of $571,000/QALY. Due to variability in pricing, value for money may be different in other countries. Our objective was to establish the cost-effectiveness of bevacizumab in mCRC in the U.S., U.K., Canada, Australia, and Israel. We performed the analysis using a previously established Markov model for mCRC. Input data for efficacy, adverse events, and quality of life were considered to be generalizable and therefore identical for all countries. We used country-specific prices for medications, administration, and other health service costs. All costs were converted from local currency to U.S. dollars at the exchange rates in March 2016. We conducted one-way and probabilistic sensitivity analyses (PSA) to assess the model robustness across parameter uncertainties. Base case results demonstrated that the highest ICER was in the U.S. ($571,000/QALY) and the lowest was in Australia ($277,000/QALY). In Canada, the U.K., and Israel, ICERs ranged between $351,000 and $358,000 per QALY. PSA demonstrated 0% likelihood of bevacizumab being cost-effective in any country at a willingness to pay threshold of $150,000 per QALY. The addition of bevacizumab to first-line chemotherapy for mCRC consistently fails to be cost-effective in all five countries. There are large differences in cost-effectiveness between countries. This study provides a framework for analyzing the value of a cancer drug from the perspectives of multiple international payers. The cost-effectiveness of bevacizumab varies significantly between multiple countries. By conventional thresholds, bevacizumab is not cost-effective in metastatic colon cancer in the U.S., the U.K., Australia, Canada, and Israel. © AlphaMed Press 2017.

Nuclear plant life cycle costs

International Nuclear Information System (INIS)

Durante, R.W.

1994-01-01

Life cycle costs of nuclear power plants in the United States are discussed. The author argues that these costs have been mishandled or neglected. Decommissioning costs have escalated, e.g. from $328 per unit in 1991 to $370 in 1993 for the Sacramento Municipal Utility District, though they still only amount to less than 0.1 cent per kWh. Waste management has been complicated in the U.S. by the decision to abandon civilian reprocessing; by the year 2000, roughly 30 U.S. nuclear power units will have filled their storage pools; dry storage has been delayed, and will be an expense not originally envisaged. Some examples of costs of major component replacement are provided. No single component has caused as much operational disruption and financial penalties as the steam generator. Operation and maintenance costs have increased steadily, and now amount to more than 70% of production costs. A strategic plan by the Nuclear Power Oversight Committee (of U.S. utilities) will ensure that the ability to correctly operate and maintain a nuclear power plant is built into the original design. 6 figs

Appropriate methodologies for assessing the societal cost and benefits of conservation programs

International Nuclear Information System (INIS)

Power, J.M.; Gill, G.S.; Harvey, K.M.

1983-01-01

The use of cost-benefit analysis for assessing the societal cost and benefits of conservation programmes is discussed. It is concluded that it should not be the sole criterion for project choice. (U.K.)

Comparison of Actual Costs to Integrate Commercial Buildings with the Grid

Energy Technology Data Exchange (ETDEWEB)

Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Technologies Area; Black, Doug [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Technologies Area; Yin, Rongxin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Technologies Area

2016-05-01

During the past decade, the technology to automate demand response (DR) in buildings and industrial facilities has advanced significantly. Automation allows rapid, repeatable, reliable operation. This study focuses on costs for DR automation in commercial buildings with some discussion on residential buildings and industrial facilities. DR automation technology relies on numerous components, including communication systems, hardware and software gateways, standards-based messaging protocols, controls and integration platforms, and measurement and telemetry systems. This paper discusses the impact factors that contribute to the costs of automated DR systems, with a focus on OpenADR 1.0 and 2.0 systems. In addition, this report compares cost data from several DR automation programs and pilot projects, evaluates trends in the cost per unit of DR and kilowatts (kW) available from automated systems, and applies a standard naming convention and classification or taxonomy for system elements. In summary, median costs for the 56 installed automated DR systems studied here are about $200/kW. The deviation around this median is large with costs in some cases being an order of magnitude greater or less than median. Costs to automate fast DR systems for ancillary services are not fully analyzed in this report because additional research is needed to determine the total such costs.

Grid-connected photovoltaic systems for Malaysian residential sector: Effects of component costs, feed-in tariffs, and carbon taxes

International Nuclear Information System (INIS)

Lau, K.Y.; Muhamad, N.A.; Arief, Y.Z.; Tan, C.W.; Yatim, A.H.M.

2016-01-01

Blessed with abundant solar radiation, Malaysia has a huge potential for grid-connected PV (photovoltaic) installations, particularly for its fast-growing residential sector. Nevertheless, Malaysia's PV installation capacity is relatively small compared with the global PV capacity. Significantly, the pricing mechanisms for grid-connected PV projects need to be appropriately assessed to build up the public's confidence to invest in PV projects. In this paper, we analyze the effects of component costs, FiTs (feed-in tariffs), and carbon taxes on grid-connected PV systems in Malaysian residential sector using the HOMER (Hybrid Optimization of Multiple Energy Resources) software. Results demonstrate that the implementation of grid-connected PV systems is highly feasible with PV array costs of $ 1120/kW or lower. For higher PV array costs up to $ 2320/kW, introducing an FiT rate three times higher ($ 0.30/kWh) than the grid tariff for a 100 kW grid sale capacity will, NPC-wise, prioritize grid-connected PV systems over the utility grid. By implementing the FiT ($ 0.50/kWh) and the carbon tax ($ 36/metric ton) schemes simultaneously, grid-connected PV systems will remain as the optimal systems even for costly PV arrays (up to $ 4000/kW). The findings are of paramount importance as far as PV pricing variability is concerned. - Highlights: • Grid-connected PV for Malaysian residential sector has been analyzed using HOMER. • Component costs, feed-in tariffs, and carbon taxes affect optimal system types. • Grid-connected PV projects are feasible for low PV array costs ($ 1120/kW or lower). • For higher PV array and inverter costs, feed-in tariffs should be implemented. • Combining feed-in tariffs with carbon taxes are effective for further lowering NPCs.

Transportation cost of nuclear off-peak power for hydrogen production based on water electrolysis

International Nuclear Information System (INIS)

Shimizu, Saburo; Ueno, Shuichi

2004-01-01

The paper describes transportation cost of the nuclear off-peak power for a hydrogen production based on water electrolysis in Japan. The power could be obtainable by substituting hydropower and/or fossil fueled power supplying peak and middle demands with nuclear power. The transportation cost of the off-peak power was evaluated to be 1.42 yen/kWh when an electrolyser receives the off-peak power from a 6kV distribution wire. Marked reduction of the cost was caused by the increase of the capacity factor. (author)

SRS K-area material storage. Expanding capabilities

International Nuclear Information System (INIS)

Koenig, R.

2013-01-01

In support of the Department of Energy’s continued plans to de-inventory and reduce the footprint of Cold War era weapons’ material production sites, the K-Area Material Storage (KAMS) facility, located in the K-Area Complex (KAC) at the Savannah River Site reservation, has expanded since its startup authorization in 2000 to accommodate DOE’s material consolidation mission. During the facility’s growth and expansion, KAMS will have expanded its authorization capability of material types and storage containers to allow up to 8200 total shipping containers once the current expansion effort completes in 2014. Recognizing the need to safely and cost effectively manage other surplus material across the DOE Complex, KAC is constantly evaluating the storage of different material types within K area. When modifying storage areas in KAC, the Documented Safety Analysis (DSA) must undergo extensive calculations and reviews; however, without an extensive and proven security posture the possibility for expansion would not be possible. The KAC maintains the strictest adherence to safety and security requirements for all the SNM it handles. Disciplined Conduct of Operations and Conduct of Projects are demonstrated throughout this historical overview highlighting various improvements in capability, capacity, demonstrated cost effectiveness and utilization of the KAC as the DOE Center of Excellence for safe and secure storage of surplus SNM.

Marginal abatement cost curves for NOx that account for ...

Science.gov (United States)

A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs typically are developed by sorting end-of-pipe controls by their respective cost effectiveness. Alternative measures, such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS), are not considered as it is difficult to quantify their abatement potential. In this paper, we demonstrate the use of an energy system model to develop a MACC for nitrogen oxides (NOx) that incorporates both end-of-pipe controls and these alternative measures. We decompose the MACC by sector, and evaluate the cost-effectiveness of RE/EE/FS relative to end-of-pipe controls. RE/EE/FS are shown to produce considerable emission reductions after end-of-pipe controls have been exhausted. Furthermore, some RE/EE/FS are shown to be cost-competitive with end-of-pipe controls. Demonstrate how the MARKAL energy system model can be used to evaluate the potential role of renewable electricity, energy efficiency and fuel switching (RE/EE/FS) in achieving NOx reductions. For this particular analysis, we show that RE/EE/FSs are able to increase the quantity of NOx reductions available for a particular marginal cost (ranging from $5k per ton to $40k per ton) by approximately 50%.

Cost reductions of fuel cells for transport applications: fuel processing options

Energy Technology Data Exchange (ETDEWEB)

Teagan, W P; Bentley, J; Barnett, B [Arthur D. Little, Inc., Cambridge, MA (United States)

1998-03-15

The highly favorable efficiency/environmental characteristics of fuel cell technologies have now been verified by virtue of recent and ongoing field experience. The key issue regarding the timing and extent of fuel cell commercialization is the ability to reduce costs to acceptable levels in both stationary and transport applications. It is increasingly recognized that the fuel processing subsystem can have a major impact on overall system costs, particularly as ongoing R and D efforts result in reduction of the basic cost structure of stacks which currently dominate system costs. The fuel processing subsystem for polymer electrolyte membrane fuel cell (PEMFC) technology, which is the focus of transport applications, includes the reformer, shift reactors, and means for CO reduction. In addition to low cost, transport applications require a fuel processor that is compact and can start rapidly. This paper describes the impact of factors such as fuel choice operating temperature, material selection, catalyst requirements, and controls on the cost of fuel processing systems. There are fuel processor technology paths which manufacturing cost analyses indicate are consistent with fuel processor subsystem costs of under $150/kW in stationary applications and $30/kW in transport applications. As such, the costs of mature fuel processing subsystem technologies should be consistent with their use in commercially viable fuel cell systems in both application categories. (orig.)

Dimensional testing for reverse k-nearest neighbor search

DEFF Research Database (Denmark)

Casanova, Guillaume; Englmeier, Elias; Houle, Michael E.

2017-01-01

Given a query object q, reverse k-nearest neighbor (RkNN) search aims to locate those objects of the database that have q among their k-nearest neighbors. In this paper, we propose an approximation method for solving RkNN queries, where the pruning operations and termination tests are guided...... by a characterization of the intrinsic dimensionality of the data. The method can accommodate any index structure supporting incremental (forward) nearest-neighbor search for the generation and verification of candidates, while avoiding impractically-high preprocessing costs. We also provide experimental evidence...

Joint optimal inspection and inventory for a k-out-of-n system

International Nuclear Information System (INIS)

Bjarnason, Erik T.S.; Taghipour, Sharareh; Banjevic, Dragan

2014-01-01

Purpose: The objective of this paper is to develop a model, which optimizes jointly the inspection frequency and the inventory level for a k-out-of-n system with repairable components whose failures are hidden. Scope: The system is periodically inspected to detect failed components, and the components are either minimally repaired or replaced with spares from the inventory. The system fails between periodic inspections if n−k+1 components are down; in that case, all failed components are inspected and rectified if possible. Otherwise, the failed components are rectified at periodic inspections. An emergency spare is ordered at a system failure, if the inventory is empty and all failed components require replacement. Methodology: Using analytical approach to find the optimal solution is computationally intensive and not practical; a simulation model is developed to solve the problem. Results: The proposed model harmonizes the maintenance and inventory policies and finds the joint optimal solution which results in a minimum total cost. Conclusion: The joint optimization model results in a lower cost compared to separate maintenance and inventory optimization models. Novelty: Few joint models for k-out-of-n systems exist, and none of them investigate repairable components whose failures are hidden and follow a non-homogeneous Poisson process. - Highlights: • We model a k-out-of-n system with hidden failures and inventory. • The system is periodically inspected and the inventory is periodically replenished. • Failed components are either replaced or minimally repaired. • A simulation model is developed to calculate the total expected cost. • The inspection interval and inventory level that minimizes the total cost is found

A cost/benefit analysis of commercial fusion-fission hybrid reactor development

International Nuclear Information System (INIS)

Kostoff, R.N.

1983-01-01

A simple algorithm was developed that allows rapid computation of the ratio R, of present worth of benefits to present worth of hybrid RandD program costs as a function of potential hybrid unit electricity cost savings, discount rate, electricity demand growth rate, total hybrid RandD program cost, and time to complete a demonstration reactor. In the sensitivity study, these variables were assigned nominal values (unit electricity cost savings of 4 mills/k W-hr, discount rate of 4%/year, growth rate of 2.25%/year, total RandD program cost of $20 billion, and time to complete a demonstration reactor of 30 years), and the variable of interest was varied about its nominal value. Results show that R increases with decreasing discount rate and increasing unit electricity savings and ranges from 4 to 94 as discount rateranges from 5 to 3%/year and unit electricity savings range from 2 to 6 mills/k W-hr. R increases with increasing growth rate and ranges from 3 to 187 as growth rate ranges from 1 to 3.5%/year and unit electricity cost savings range from 2 to 6 mills/k W-hr. R attains a maximum value when plotted against time to complete a demonstration reactor. The location of this maximum value occurs at shorter completion times as discount rate increases, and this optimal completion time ranges from 20 years for a discount rate of 4%/year to 45 years for a discount rate of 3%/year

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Science.gov (United States)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; AN, Seong Jin; David, Lamuel Abraham; Hays, Kevin; Wood, Marissa; Phillip, Nathan D.; Sheng, Yangping; Mao, Chengyu; Kalnaus, Sergiy; Daniel, Claus; Wood, David L.

2017-09-01

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by 70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. This article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.

The effect of pulmonary artery catheter use on costs and long-term outcomes of acute lung injury.

Directory of Open Access Journals (Sweden)

Gilles Clermont

Full Text Available The pulmonary artery catheter (PAC remains widely used in acute lung injury (ALI despite known complications and little evidence of improved short-term mortality. Concurrent with NHLBI ARDS Clinical Trials Network Fluid and Catheters Treatment Trial (FACTT, we conducted a prospectively-defined comparison of healthcare costs and long-term outcomes for care with a PAC vs. central venous catheter (CVC. We explored if use of the PAC in ALI is justified by a beneficial cost-effectiveness profile.We obtained detailed bills for the initial hospitalization. We interviewed survivors using the Health Utilities Index Mark 2 questionnaire at 2, 6, 9 and 12 m to determine quality of life (QOL and post-discharge resource use. Outcomes beyond 12 m were estimated from federal databases. Incremental costs and outcomes were generated using MonteCarlo simulation.Of 1001 subjects enrolled in FACTT, 774 (86% were eligible for long-term follow-up and 655 (85% consented. Hospital costs were similar for the PAC and CVC groups ($96.8k vs. $89.2k, p = 0.38. Post-discharge to 12 m costs were higher for PAC subjects ($61.1k vs. 45.4k, p = 0.03. One-year mortality and QOL among survivors were similar in PAC and CVC groups (mortality: 35.6% vs. 31.9%, p = 0.33; QOL [scale: 0-1]: 0.61 vs. 0.66, p = 0.49. MonteCarlo simulation showed PAC use had a 75.2% probability of being more expensive and less effective (mean cost increase of $14.4k and mean loss of 0.3 quality-adjusted life years (QALYs and a 94.2% probability of being higher than the $100k/QALY willingness-to-pay threshold.PAC use increased costs with no patient benefit and thus appears unjustified for routine use in ALI.www.clinicaltrials.gov NCT00234767.

2016 End of the year South Carolina PV soft cost and workforce development

Energy Technology Data Exchange (ETDEWEB)

Fox, Elise B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, Thomas B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Drory, Michael D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-08-16

A solar industry survey was given to professional installers who serve the South Carolina market in order to determine trends in costing, work force needs, and business demographics at the end of 2016. It was found that 70% of the respondents serve the residential sector, while only 7% of the total exclusively serves the residential market. The average size of residential installations remain near 9 kW-DC, while the average size of commercial and utility scale installations continue to grow to 378 kW-DC and 14.8 MW-DC, respectively. The total cost of these residential systems has hovered around $3.50/W-DC since the end of 2015, while commercial installations have dropped to $2.45/W-DC and utility scale installations have dropped to $1.49/W-DC. It is expected that the cost of utility scale installations will continue to drop as there are publically reported utility scale installations with contracted PPAs for less than 4¢/kWh. 52-60% of the cost is associated with hardware only depending upon sector.

Comparing the life cycle costs of using harvest residue as feedstock for small- and large-scale bioenergy systems (part II)

International Nuclear Information System (INIS)

Cleary, Julian; Wolf, Derek P.; Caspersen, John P.

2015-01-01

In part II of our two-part study, we estimate the nominal electricity generation and GHG (greenhouse gas) mitigation costs of using harvest residue from a hardwood forest in Ontario, Canada to fuel (1) a small-scale (250 kW e ) combined heat and power wood chip gasification unit and (2) a large-scale (211 MW e ) coal-fired generating station retrofitted to combust wood pellets. Under favorable operational and regulatory conditions, generation costs are similar: 14.1 and 14.9 cents per kWh (c/kWh) for the small- and large-scale facilities, respectively. However, GHG mitigation costs are considerably higher for the large-scale system: $159/tonne of CO 2 eq., compared to $111 for the small-scale counterpart. Generation costs increase substantially under existing conditions, reaching: (1) 25.5 c/kWh for the small-scale system, due to a regulation mandating the continual presence of an operating engineer; and (2) 22.5 c/kWh for the large-scale system due to insufficient biomass supply, which reduces plant capacity factor from 34% to 8%. Limited inflation adjustment (50%) of feed-in tariff rates boosts these costs by 7% to 11%. Results indicate that policy generalizations based on scale require careful consideration of the range of operational/regulatory conditions in the jurisdiction of interest. Further, if GHG mitigation is prioritized, small-scale systems may be more cost-effective. - Highlights: • Generation costs for two forest bioenergy systems of different scales are estimated. • Nominal electricity costs are 14.1–28.3 cents/kWh for the small-scale plant. • Nominal electricity costs are 14.9–24.2 cents/kWh for the large-scale plant. • GHG mitigation costs from displacing coal and LPG are $111-$281/tonne of CO 2 eq. • High sensitivity to cap. factor (large-scale) and labor requirements (small-scale)

EVALUATION OF FORWARDER WOOD EXTRACTION COST OF OPERATION

Directory of Open Access Journals (Sweden)

Larissa Nunes dos Santos

2016-03-01

Full Text Available The objective of this study was to determine the costs of the activity of timber extraction done by forwarders until approximately 30,000 work hours. We used 7 John Deere forwarders, model 1710D with 160 kW engine power. A database provided by a forestry company located in the state of Minas Gerais was used, containing all the information necessary for calculating the operating cost of the machines and for the subsequent sensitivity analysis. The operating cost was obtained by the sum of the fixed and variable costs. For the sensitivity analysis a variation ± 20% of the most representative elements of the total cost of the machine was performed. The result obtained for the average operating cost of the forwarder was US$ 147.80 h-1. Costs for repairs and maintenance, labor, fuel, and depreciation represented approximately 90% of the total cost of the machine. A 10% reduction in their values resulted in a savings of approximately 9% in all years evaluated.

Determination of chest x-ray cost using activity based costing approach at Penang General Hospital, Malaysia.

Science.gov (United States)

Atif, Muhammad; Sulaiman, Syed Azhar Syed; Shafie, Asrul Akmal; Saleem, Fahad; Ahmad, Nafees

2012-01-01

Activity based costing (ABC) is an approach to get insight of true costs and to solve accounting problems. It provides more accurate information on product cost than conventional accounting system. The purpose of this study was to identify detailed resource consumption for chest x-ray procedure. Human resource cost was calculated by multiplying the mean time spent by employees doing specific activity to their per-minute salaries. The costs of consumables and clinical equipments were obtained from the procurement section of the Radiology Department. The cost of the building was calculated by multiplying the area of space used by the chest X-ray facility with the unit cost of public building department. Moreover, straight-line deprecation with a discount rate of 3% was assumed for calculation of equivalent annual costs for building and machines. Cost of electricity was calculated by multiplying number of kilo watts used by electrical appliance in the year 2010 with electricity tariff for Malaysian commercial consumers (MYR 0.31 per kWh). Five activities were identified which were required to develop one chest X-ray film. Human resource, capital, consumable and electricity cost was MYR 1.48, MYR 1.98, MYR 2.15 and MYR 0.04, respectively. Total cost of single chest X-ray was MYR 5.65 (USD 1.75). By applying ABC approach, we can have more detailed and precise estimate of cost for specific activity or service. Choice of repeating a chest X-ray can be based on our findings, when cost is a limiting factor.

The costs of respiratory illnesses arising from Florida gulf coast Karenia brevis blooms.

Science.gov (United States)

Hoagland, Porter; Jin, Di; Polansky, Lara Y; Kirkpatrick, Barbara; Kirkpatrick, Gary; Fleming, Lora E; Reich, Andrew; Watkins, Sharon M; Ullmann, Steven G; Backer, Lorraine C

2009-08-01

Algal blooms of Karenia brevis, a harmful marine algae, occur almost annually off the west coast of Florida. At high concentrations, K. brevis blooms can cause harm through the release of potent toxins, known as brevetoxins, to the atmosphere. Epidemiologic studies suggest that aerosolized brevetoxins are linked to respiratory illnesses in humans. We hypothesized a relationship between K. brevis blooms and respiratory illness visits to hospital emergency departments (EDs) while controlling for environmental factors, disease, and tourism. We sought to use this relationship to estimate the costs of illness associated with aerosolized brevetoxins. We developed a statistical exposure-response model to express hypotheses about the relationship between respiratory illnesses and bloom events. We estimated the model with data on ED visits, K. brevis cell densities, and measures of pollen, pollutants, respiratory disease, and intra-annual population changes. We found that lagged K. brevis cell counts, low air temperatures, influenza outbreaks, high pollen counts, and tourist visits helped explain the number of respiratory-specific ED diagnoses. The capitalized estimated marginal costs of illness for ED respiratory illnesses associated with K. brevis blooms in Sarasota County, Florida, alone ranged from $0.5 to $4 million, depending on bloom severity. Blooms of K. brevis lead to significant economic impacts. The costs of illness of ED visits are a conservative estimate of the total economic impacts. It will become increasingly necessary to understand the scale of the economic losses associated with K. brevis blooms to make rational choices about appropriate mitigation.

Evaluation of actual costs of power sources and effects on balance sheets of electric utilities

International Nuclear Information System (INIS)

Matsuo, Yuji; Yamaguchi, Yuji; Murakami, Tomoko

2013-01-01

After the Fukushima nuclear accident, almost all nuclear power stations continued to stop operation and sharp increase of purchase costs of fossil fuels forced some electric utilities to suffer a deficit. This article presented quantitative analysis of effects of present state on power costs and balance sheets of electric utilities. Levelized costs of electricity increased from 8.6 ¥/kWh (2010) to 11.6 ¥/kWh (2011) and 12.6 ¥/kWh (2012). Total power costs increased from 7.5 Trillion¥(2010) to 9.5 Trillion¥(2011). Due to increase of cost of fossil fuel compensated for nuclear power, electric utilities suffered a net loss of 0.8 Trillion¥ and decreased surplus to 2.5 Trillion¥ in 2011. Net loss of 1.3 Trillion¥ and surplus of 1.2 Trillion¥ was estimated for 2012. This state was beyond the limit of utilities' efforts to reduce costs and uncertain share of power sources became a great risk. Future share of power sources should be judged appropriately from various standpoints (costs, stable supply, energy security and national economic growth) and early public dissemination of new philosophy on share of power sources was highly required. (T. Tanaka)

The ratio Φ→K+K-/K0 anti K0

International Nuclear Information System (INIS)

Bramon, A.; Lucio, M.J.L.

2000-01-01

The ratio Φ→K + K - /K 0 K 0 is discussed and its present experimental value is compared with theoretical expectations. A difference larger than two standard deviations is observed. It is critically examined a number of mechanisms that could account for this discrepancy, which remains unexplained. Measurements at DAΦNE at the level of the per mille accuracy can clarify whether there exist any anomaly

Design, performance and cost of energy from high concentration and flat-plate utility-scale PV systems

International Nuclear Information System (INIS)

Stolte, W.J.; Whisnant, R.A.; McGowin, C.R.

1993-01-01

This paper presents the results of a recent study to assess the near-term cost of power in central station applications. Three PV technologies were evaluated: Fresnel-lens high-concentration photovoltaic (HCPV), central receiver HCPV, and flat-plate PV using thin-film copper indium diselenide (CIS) cell technology. Baseline assumptions included PV cell designs and performances projected for the 1995 timeframe, 25 and 100 MW/year cell manufacturing rates, 50 MW power plant size, and mature technology cost and performance estimates. The plant design characteristics are highlighted. Potential sites were evaluated and selected for the PV power plants (Carrisa Plains, CA and Apalachicola, FL) and cell manufacturing plants (Dallas-Fort Worth, TX). Conceptual designs and cost estimates were developed for the plants and their components. Plant performance was modeled and the designs were optimized to minimize levelized energy costs. Overall, the flat plate design exhibited the lowest energy costs among the designs evaluated. Its levelized energy costs at the Carrisa Plains site were estimated to be 11.8 and 10.8 cents/kWh (1990 $) for 25 and 100 MW/year module production rates, respectively. This meets the 12 cents/kWh DOE near-term goal. The energy cost of the Fresnel lens plant (at Carrisa Plains and a 100 MW/year cell production rate) was estimated to be 12.4 cents/kWh and the corresponding central receiver energy cost was estimated to be 13.1 cents/kWh, both of which are very close to the DOE goal. Further design optimization efforts are still warranted and can be expected to reduce plant capital costs

Finding the K best synthesis plans.

Science.gov (United States)

Fagerberg, Rolf; Flamm, Christoph; Kianian, Rojin; Merkle, Daniel; Stadler, Peter F

2018-04-05

In synthesis planning, the goal is to synthesize a target molecule from available starting materials, possibly optimizing costs such as price or environmental impact of the process. Current algorithmic approaches to synthesis planning are usually based on selecting a bond set and finding a single good plan among those induced by it. We demonstrate that synthesis planning can be phrased as a combinatorial optimization problem on hypergraphs by modeling individual synthesis plans as directed hyperpaths embedded in a hypergraph of reactions (HoR) representing the chemistry of interest. As a consequence, a polynomial time algorithm to find the K shortest hyperpaths can be used to compute the K best synthesis plans for a given target molecule. Having K good plans to choose from has many benefits: it makes the synthesis planning process much more robust when in later stages adding further chemical detail, it allows one to combine several notions of cost, and it provides a way to deal with imprecise yield estimates. A bond set gives rise to a HoR in a natural way. However, our modeling is not restricted to bond set based approaches-any set of known reactions and starting materials can be used to define a HoR. We also discuss classical quality measures for synthesis plans, such as overall yield and convergency, and demonstrate that convergency has a built-in inconsistency which could render its use in synthesis planning questionable. Decalin is used as an illustrative example of the use and implications of our results.

Comparison study on models for calculation of NPP’s levelized unit electricity cost

International Nuclear Information System (INIS)

Nuryanti; Mochamad Nasrullah; Suparman

2014-01-01

Economic analysis that is generally done through the calculation of Levelized Unit Electricity Cost (LUEC) is crucial to be done prior to any investment decision on the nuclear power plant (NPP) project. There are several models that can be used to calculate LUEC, which are: R&D PT. PLN (Persero) Model, Mini G4ECONS model and Levelized Cost model. This study aimed to perform a comparison between the three models. Comparison technique was done by tracking the similarity used for each model and then given a case of LUEC calculation for SMR NPP 2 x 100 MW using these models. The result showed that the R&D PT. PLN (Persero) Model have a common principle with Mini G4ECONS model, which use Capital Recovery Factor (CRF) to discount the investment cost which eventually become annuity value along the life of plant. LUEC on both models is calculated by dividing the sum of the annual investment cost and the cost for operating NPP with an annual electricity production.While Levelized Cost model based on the annual cash flow. Total of annual costs and annual electricity production were discounted to the first year of construction in order to obtain the total discounted annual cost and the total discounted energy generation. LUEC was obtained by dividing both of the discounted values. LUEC calculations on the three models produce LUEC value, which are: 14.5942 cents US$/kWh for R&D PT. PLN (Persero) Model, 15.056 cents US$/kWh for Mini G4ECONs model and 14.240 cents US$/kWh for Levelized Cost model. (author)

Performance and Potential Study of 10kW Wind Turbine Generator for 6 Cities in Malaysia

OpenAIRE

Mustaqimah Mustaqimah

2013-01-01

ABSTRACT. This study presents an analysis of the optimization by using HOMER software and financial viability of 10 kW wind turbine generator (WTG) through grid connected system for six different locations in Malaysia (Mersing, Kuching, K.Trengganu, Kudat, Melaka and Labuan). Assessment criteria comprised Total Net Present Cost (TNPC), and Cost of Energy ( COE ). The HOMER ( National Renewable Energy laboratory, US) was utilized as the assessment tool with modeling performed with hourly load ...

Cost evaluation of irradiation system with electron accelerator

International Nuclear Information System (INIS)

Kashiwagi, M.

2003-01-01

The features of electron beam irradiation system using electron accelerator are direct energy pour into the irradiated material, no third material mixture such as catalyst, suitable for mass production and easy operation and maintenance work available. These features can bring the various applications such as cross-linking action, graft polymerization, radical polymerization and others. The selection of electron accelerator ratings is made under consideration of quality, width and thickness of irradiated material, production amount, dose required for reaction and irradiation atmosphere. Especially in a case of irradiation of wire with high insulation material such as polyethylene, the consideration of maximum thickness toward irradiation direction is necessary to avoid the discharge (Lichtenberg discharge) by charged-up electrons inside insulation material. Therefore, the acceleration voltage should be selected to make the maximum penetration larger than maximum irradiation thickness. The actual model case of estimate the irradiation cost was selected that the irradiation object was polyethylene insulated wire up to AWG no.14, irradiation amount was 5,000 km/month, necessary dose was 200 kGy, operation time was 22 d/month and 8 h/day and actual operation efficiency was considered loss time such as bobbin changing as 80%. The selected ratings of electron accelerator were acceleration voltage of 800 kV, beam current of 100 mA and irradiation width of 180 cm with irradiation pulleys stand of 60 turns x 3 lanes. The initial total cost was estimated as 3 M$(US) and operation cost was evaluated as 215 k$(US). Therefore, the irradiation cost of wire was evaluated as 0.0036 $/m. (author)

Cost-Reduction Roadmap for Residential Solar Photovoltaics (PV), 2017-2030

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ardani, Kristen B. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fu, Ran [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-03

The installed cost of solar photovoltaics (PV) has fallen rapidly in recent years and is expected to continue declining in the future. In this report, we focus on the potential for continued PV cost reductions in the residential market. From 2010 to 2017, the levelized cost of energy (LCOE) for residential PV declined from 52 cents per kilowatt-hour (cents/kWh) to 16 cents/kWh (Fu et al. 2017). The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) recently set new LCOE targets for 2030, including a target of 5 cents/kWh for residential PV. We present a roadmap for achieving the SETO 2030 residential PV target. Because the 2030 target likely will not be achieved under business-as-usual trends (NREL 2017), we examine two key market segments that demonstrate significant opportunities for cost savings and market growth: installing PV at the time of roof replacement and installing PV as part of the new home construction process. Within both market segments, we identify four key cost-reduction opportunities: market maturation, business model integration, product innovation, and economies of scale. To assess the potential impact of these cost reductions, we compare modeled residential PV system prices in 2030 to the National Renewable Energy Laboratory's (NREL's) quarter one 2017 (Q1 2017) residential PV system price benchmark (Fu et al. 2017). We use a bottom-up accounting framework to model all component and project-development costs incurred when installing a PV system. The result is a granular accounting for 11 direct and indirect costs associated with installing a residential PV system in 2030. All four modeled pathways demonstrate significant installed-system price savings over the Q1 2017 benchmark, with the visionary pathways yielding the greatest price benefits. The largest modeled cost savings are in the supply chain, sales and marketing, overhead, and installation labor cost categories. When we translate these

Cost/benefit study on date disinfestation by gamma irradiation in Algeria

International Nuclear Information System (INIS)

Mahlous, M.

2002-01-01

To establish the irradiation technology, one must have a holistic approach to the technology of food irradiation in order to assure a maximum utilization rate of the facility. The assumptions in this study are based on a free standing multipurpose irradiation facility, the throughput of which is expressed in t·kGy/year, and the unit cost of the treatment in US $/t·kGy. These values may then be applied for the calculation of the treatment cost of any food commodity, according to the irradiation dose needed. The study showed that irradiation treatment of dates is profitable and that the cost of irradiation does not exceed 1.6% of the selling price of the product. Post harvest losses may be considerably reduced thanks to irradiation treatment. A comparative study between irradiation and cold storage showed that irradiation will cost 30% less than cold storage. This study is completed by an evaluation of consumer acceptance of irradiated food products. (author)

Location model of specialized terminals for soybe an exports in Brazil

Directory of Open Access Journals (Sweden)

Alessandra Fraga Dubke

2011-04-01

Full Text Available The purpose of this work is the development of a location model for specialized terminals used as transshipment points in the supply chain of soybeans. The theoretical basis of the study relies on the association of a transshipment model with a multi-commodity, multi-facility capacitated location model. The shipping ports might be seen as specialized terminals that add value to the exported products by transforming raw soy grains into soy oil and soy meal. The proposed model also considers service activities in each terminal and the capacity of the maritime ports. Using representative data from the year 2004, the model is illustrated by a small case study, which considers six points of production in inland Brazil, all served by railways, one maritime port on the north and five on the east coast, and three destination ports in Europe and Asia. The study includes a rough sensitivity analysis regarding volumes, capacities, prices, and transportation costs

Nuclear operating costs are rising exponentially - official

International Nuclear Information System (INIS)

Thomas, S.

1988-01-01

The Energy Information Agency of the United States Department of Energy has collected data on the operations of nuclear power plants in the United States. A statistical regression analysis was made of this data base. This shows that the escalation in annual, real non-fuel operating costs is such that the operating cost savings made by closing down an old nuclear plant would be sufficient to pay the capital and operating costs of replacing it with a brand new coal-fired plant. The main reason for the increasing operating and maintenance costs is the cost of replacement power i.e. the higher the economic penalty of plant breakdown the more the utility has to spend on maintenance. Another reason is time -not the age of the plant - but the year the data was collected. The economic case for nuclear power is seriously challenged. (U.K.)

Total cost estimates for large-scale wind scenarios in UK

International Nuclear Information System (INIS)

Dale, Lewis; Milborrow, David; Slark, Richard; Strbac, Goran

2004-01-01

The recent UK Energy White Paper suggested that the Government should aim to secure 20% of electricity from renewable sources by 2020. A number of estimates of the extra cost of such a commitment have been made, but these have not necessarily included all the relevant cost components. This analysis sets out to identify these and to calculate the extra cost to the electricity consumer, assuming all the renewable electricity is sourced from wind energy. This enables one of the more controversial issues--the implications of wind intermittency--to be addressed. The basis of the assumptions associated with generating costs, extra balancing costs and distribution and transmission system reinforcement costs are all clearly identified and the total costs of a '20% wind' scenario are compared with a scenario where a similar amount of energy is generated by gas-fired plant. This enables the extra costs of the renewables scenario to be determined. The central estimate of the extra costs to electricity consumers is just over 0.3 p/kW h in current prices (around 5% extra on average domestic unit prices). Sensitivity analyses examine the implications of differing assumptions. The extra cost would rise if the capital costs of wind generation fall slower than anticipated, but would fall if gas prices rise more rapidly than has been assumed, or if wind plant are more productive. Even if it is assumed that wind has no capacity displacement value, the added cost to the electricity consumer rises by less than 0.1 p/kW h. It is concluded that there does not appear to be any technical reason why a substantial proportion of the country's electricity requirements could not be delivered by wind

Calculation of energy costs of composite biomass stirring at biogas stations

Science.gov (United States)

Suslov, D. Yu; Temnikov, D. O.

2018-03-01

The paper is devoted to the study of the equipment to produce biogas fuel from organic wastes. The bioreactor equipped with a combined stirring system ensuring mechanical and bubbling stirring is designed. The method of energy cost calculation of the combined stirring system with original design is suggested. The received expressions were used in the calculation of the stirring system installed in the 10 m3 bioreactor: power consumed by the mixer during the start-up period made Nz =9.03 kW, operating power of the mixer made NE =1.406 kW, compressor power for bubbling stirring made NC =18.5 kW. Taking into account the operating mode of single elements of the stirring system, the energy cost made 4.38% of the total energy received by the biogas station.

Effectiveness and costs of phototest in dementia and cognitive impairment screening

Directory of Open Access Journals (Sweden)

Saez-Zea Carmen

2011-07-01

Full Text Available Abstract Background To assess and compare the effectiveness and costs of Phototest, Mini Mental State Examination (MMSE, and Memory Impairment Screen (MIS to screen for dementia (DEM and cognitive impairment (CI. Methods A phase III study was conducted over one year in consecutive patients with suspicion of CI or DEM at four Primary Care (PC centers. After undergoing all screening tests at the PC center, participants were extensively evaluated by researchers blinded to screening test results in a Cognitive-Behavioral Neurology Unit (CBNU. The gold standard diagnosis was established by consensus of expert neurologists. Effectiveness was assessed by the proportion of correct diagnoses (diagnostic accuracy [DA] and by the kappa index of concordance between test results and gold standard diagnoses. Costs were based on public prices and hospital accounts. Results The study included 140 subjects (48 with DEM, 37 with CI without DEM, and 55 without CI. The MIS could not be applied to 23 illiterate subjects (16.4%. For DEM, the maximum effectiveness of the MMSE was obtained with different cutoff points as a function of educational level [k = 0.31 (95% Confidence interval [95%CI], 0.19-0.43, DA = 0.60 (95%CI, 0.52-0.68], and that of the MIS with a cutoff of 3/4 [k = 0.63 (95%CI, 0.48-0.78, DA = 0.83 (95%CI, 0.80-0.92]. Effectiveness of the Phototest [k = 0.71 (95%CI, 0.59-0.83, DA = 0.87 (95%CI, 0.80-0.92] was similar to that of the MIS and higher than that of the MMSE. Costs were higher with MMSE (275.9 ± 193.3€ [mean ± sd euros] than with Phototest (208.2 ± 196.8€ or MIS (201.3 ± 193.4€, whose costs did not significantly differ. For CI, the effectiveness did not significantly differ between MIS [k = 0.59 (95%CI, 0.45-0.74, DA = 0.79 (95%CI, 0.64-0.97] and Phototest [k = 0.58 (95%CI, 0.45-0.74, DA = 0.78 (95%CI, 0.64-0.95] and was lowest for the MMSE [k = 0.27 (95%CI, 0.09-0.45, DA = 0.69 (95%CI, 0.56-0.84]. Costs were higher for MMSE (393.4 �

GTHTR300 cost reduction through design upgrade and cogeneration

Energy Technology Data Exchange (ETDEWEB)

Yan, Xing L., E-mail: yan.xing@jaea.go.jp; Sato, Hiroyuki; Kamiji, Yu; Imai, Yoshiyuki; Terada, Atsuhiko; Tachibana, Yukio; Kunitomi, Kazuhiko

2016-09-15

Japan Atomic Energy Agency began design and development of the Gas Turbine High Temperature Reactor of 300MWe nominal output (GTHTR300) in 2001. The reactor baseline design completed three years later was based on 850 °C core outlet temperature and a direct cycle gas turbine balance of plant. It attained 45.6% net power generation efficiency and 3.5 US¢/kW h cost of electricity. The cost was estimated 20% lower than LWR. The latest design upgrade has incorporated several major technological advances made in the past ten years to both reactor and balance of plant. As described in this paper, these advances have enabled raising the design basis reactor core outlet temperature to 950 °C and increasing power generating efficiency by nearly 5% point. Further implementation of seawater desalination cogeneration is made through employing a newly-proposed multi-stage flash process. Through efficient waste heat recovery of the reactor gas turbine power conversion cycle, a large cost credit is obtained against the conventionally produced water prices. Together, the design upgrade and the cogeneration are shown to reduce the GTHTR300 cost of electricity to under 2.7 US¢/kW h.

The relation of potassium and sodium intakes to diet cost among U.S. adults.

Science.gov (United States)

Drewnowski, A; Rehm, C D; Maillot, M; Monsivais, P

2015-01-01

The 2010 Dietary Guidelines recommended that Americans increase potassium and decrease sodium intakes to reduce the burden of hypertension. One reason why so few Americans meet the recommended potassium or sodium goals may be perceived or actual food costs. This study explored the monetary costs associated with potassium and sodium intakes using national food prices and a representative sample of US adults. Dietary intake data from the 2001-2002 National Health and Nutrition Examination Survey were merged with a national food prices database. In a population of 4744 adults, the association between the energy-adjusted sodium and potassium intakes, and the sodium-to-potassium ratio (Na:K) and energy-adjusted diet cost was evaluated. Diets that were more potassium-rich or had lower Na:K ratios were associated with higher diet costs, while sodium intakes were not related to cost. The difference in diet cost between extreme quintiles of potassium intakes was $1.49 (95% confidence interval: 1.29, 1.69). A food-level analysis showed that beans, potatoes, coffee, milk, bananas, citrus juices and carrots are frequently consumed and low-cost sources of potassium. Based on existing dietary data and current American eating habits, a potassium-dense diet was associated with higher diet costs, while sodium was not. Price interventions may be an effective approach to improve potassium intakes and reduce the Na:K ratio of the diet. The present methods helped identify some alternative low-cost foods that were effective in increasing potassium intakes. The identification and promotion of lower-cost foods to help individuals meet targeted dietary recommendations could accompany future dietary guidelines.

Photovoltaic balance-of-system designs and costs at PVUSA

Science.gov (United States)

Reyes, A. B.; Jennings, C.

1995-05-01

This report is one in a series of 1994-1995 PVUSA reports that document PVUSA lessons learned at demonstration sites in California and Texas. During the last 7 years (1988 to 1994), 16 PV systems ranging from 20 kW to 500 kW have been installed. Six 20-kW emerging module technology (EMT) arrays and three turnkey (i.e., vendor designed and integrated) utility-scale systems were procured and installed at PVUSA's main test site in Davis, California. PVUSA host utilities have installed a total of seven EMT arrays and utility-scale systems in their service areas. Additional systems at Davis and host utility sites are planned. One of PVUSA's key objectives is to evaluate the performance, reliability, and cost of PV balance-of-system (BOS). In the procurement stage PVUSA encouraged innovative design to improve upon present practice by reducing maintenance, improving reliability, or lowering manufacturing or construction costs. The project team worked closely with suppliers during the design stage not only to ensure designs met functional and safety specifications, but to provide suggestions for improvement. This report, intended for the photovoltaic (PV) industry and for utility project managers and engineers considering PV plant construction and ownership, documents PVUSA utility-scale system design and cost lessons learned. Complementary PVUSA topical reports document: construction and safety experience; five-year assessment of EMTs; validation of the Kerman 500-kW grid-support PV plant benefits; PVUSA instrumentation and data analysis techniques; procurement, acceptance, and rating practices for PV power plants; experience with power conditioning units and power quality.

How to Launch an Energy Star Energy Efficiency Competition for K-12 Schools

Science.gov (United States)

Utebay Kudret; McArthur, Ashley

2012-01-01

In recent years, schools have been forced by rising costs and shrinking budgets to stretch their resources further than ever before in order to meet the educational needs of today's students. EPA's ENERGY STAR program helps K-12 schools and districts improve energy efficiency, reduce operating costs and redirect critical resources into the…

Boundary expansion algorithm of a decision tree induction for an imbalanced dataset

Directory of Open Access Journals (Sweden)

Kesinee Boonchuay

2017-10-01

Full Text Available A decision tree is one of the famous classifiers based on a recursive partitioning algorithm. This paper introduces the Boundary Expansion Algorithm (BEA to improve a decision tree induction that deals with an imbalanced dataset. BEA utilizes all attributes to define non-splittable ranges. The computed means of all attributes for minority instances are used to find the nearest minority instance, which will be expanded along all attributes to cover a minority region. As a result, BEA can successfully cope with an imbalanced dataset comparing with C4.5, Gini, asymmetric entropy, top-down tree, and Hellinger distance decision tree on 25 imbalanced datasets from the UCI Repository.

Planning and production of a low cost cryostat for electrical characterization of materials

International Nuclear Information System (INIS)

Torsoni, G.B.; Carvalho, C.L.; Brito, G.A.

2010-01-01

The system BSCCO can show three main Bi 2 Sr 2 CuO, Bi 2 Sr 2 CaCu 2 O and Bi 2 Sr 2 Ca 2 Cu 3 O with critical temperatures around 20 K, 80 K and 110 K, respectively. Therefore, it is fundamental to study these materials in details at lowest temperatures, with simple systems and low cost equipment. In this work was projected a cryogenic system with capacity to reach temperatures below the liquid nitrogen temperature (77 K). Based on thermodynamic principles, which is used with liquid nitrogen system, with the vacuum application and control, it has been achieved temperatures about 63 K (freezing nitrogen temperature) in the sample holder. With the availability of a large range temperature becomes possible to identify at least two superconducting phases as in system BSCCO, which also involves a cost/benefit ratio more favorable, avoiding the use of more expensive refrigerates as liquid helium. (author)

The K-1 Active Dispenser for Orbit Transfer

Science.gov (United States)

Lai, G.; Cochran, D.; Curtis, R.

2002-01-01

Kistler Aerospace Corporation is building the K-1, the world's first fully reusable launch vehicle. The two-stage K- 1 is designed primarily to service the market for low-earth orbit (LEO) missions, due to Kistler's need to recover both stages. For customers requiring payload delivery to high-energy orbits, Kistler can outfit the payload with a K- 1 Active Dispenser (an expendable third stage). The K-1 second stage will deploy the Active Dispenser mated with its payload into a 200 km circular LEO parking orbit. From this orbit, the Active Dispenser would use its own propulsion to place its payload into the final desired drop-off orbit or earth-escape trajectory. This approach allows Kistler to combine the low-cost launch services offered by the reusable two-stage K-1 with the versatility of a restartable, expendable upper stage. Enhanced with an Active Dispenser, the K-1 will be capable of delivering 1,500 kg to a geosynchronous transfer orbit or up to approximately 1,000 kg into a Mars rendezvous trajectory. The list price of a K-1 Active Dispenser launch is 25 million (plus the price of mission unique integration services) significantly less than the price of any launch vehicle service in the world with comparable capability.

An Analysis of Aviation Maintenance Operations and Supporting Costs, and Cost Capturing Systems

Science.gov (United States)

2012-12-04

the La Mesa Parent Teacher Association. = ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ã= do^ar^qb=p`elli=lc=_rpfkbpp=C=mr_if`=mlif`v= = - vii -= k^s^i=mlpqdo^ar^qb=p...host.uniroma3.it/facolta/ economia /db/materiali/insegnamenti/588_3930.pdf Cost Analysis Improvement Group (CAIG). (2007). Office of the Secretary of

Professor Jeffery on the real cost of nuclear electricity in the UK: a note; and reply

International Nuclear Information System (INIS)

McGuire, A.; Barclay, R.S.; Jeffery, J.W.

1982-01-01

Two letters published in reply to an earlier article on the real cost of nuclear electricity in the U.K. criticize the use of the Retail Price Index as a price deflator and the attempts to convert capital charges from historical to a current cost basis. Corrections are made to the corresponding results. The author of the original article replies. (U.K.)

Wind power costs expected to decrease due to technological progress

International Nuclear Information System (INIS)

Williams, Eric; Hittinger, Eric; Carvalho, Rexon; Williams, Ryan

2017-01-01

The potential for future cost reductions in wind power affects adoption and support policies. Prior analyses of cost reductions give inconsistent results. The learning rate, or fractional cost reduction per doubling of production, ranges from −3% to +33% depending on the study. This lack of consensus has, we believe, contributed to high variability in forecasts of future costs of wind power. We find that learning rate can be very sensitive to the starting and ending years of datasets and the geographical scope of the study. Based on a single factor experience curve that accounts for capacity factor gains, wind quality decline, and exogenous shifts in capital costs, we develop an improved model with reduced temporal variability. Using a global adoption model, the wind-learning rate is between 7.7% and 11%, with a preferred estimate of 9.8%. Using global scenarios for future wind deployment, this learning rate range implies that the cost of wind power will decline from 5.5 cents/kWh in 2015 to 4.1–4.5 cents/kWh in 2030, lower than a number of other forecasts. If attained, wind power may be the cheapest form of new electricity generation by 2030, suggesting that support and investment in wind should be maintained or expanded. - Highlights: • Expectations for cost reductions in wind power is important for policy. • Wind learning rates are sensitive to data time period and regional choice. • We develop improved wind cost model with much reduced variability. • New model gives global wind learning rates between 7.7%-11%.

THE ENERGETIC COST OF FEATHER SYNTHESIS IS PROPORTIONAL TO BASAL METABOLIC-RATE

NARCIS (Netherlands)

VISSER, GH; DAAN, S

1993-01-01

The cost of feather production, C(f) (kJ . [g dry feathers]-1), differs substantially between species. We studied the molt cost in one insectivorous songbird (bluethroat, Luscinia s. svecica) and one granivorous songbird (common redpoll, Carduelis f. flammea), We wanted to test whether differences

Cost calculation and financial measures for high-level waste disposal business

International Nuclear Information System (INIS)

Sekiguchi, Hiromasa.

1987-01-01

A study is made on the costs for disposal of high-level wastes, centering on financial problems involving cost calculation for disposal business and methods and systems for funding the business. The first half of the report is focused on calculation of costs for disposal business. Basic equations are shown to calculate the total costs required for a disposal plant and the costs for disposal of one unit of high-level wastes. A model is proposed to calculate the charges to be paid by electric power companies to the plant for disposal of their wastes. Another equation is derived to calculate the disposal charge per kWh of power generation in a power plant. The second half of the report is focused on financial measures concerning expenses for disposal. A financial basis should be established for the implementation of high-level waste disposal. It is insisted that a reasonable method for estimating the disposal costs should be set up and it should be decided who will pay the expenses. Discussions are made on some methods and systems for funding the disposal business. An additional charge should be included in the electricity bill to be paid by electric power users, or it should be included in tax. (Nogami, K.)

Fuel cycle cost analysis on molten-salt reactors

International Nuclear Information System (INIS)

Shimazu, Yoichiro

1976-01-01

An evaluation is made of the fuel cycle costs for molten-salt reactors (MSR's), developed at Oak Ridge National Laboratory. Eight combinations of conditions affecting fuel cycle costs are compared, covering 233 U-Th, 235 U-Th and 239 Pu-Th fuels, with and without on-site continuous fuel reprocessing. The resulting fuel cycle costs range from 0.61 to 1.18 mill/kWh. A discussion is also given on the practicability of these fuel cycles. The calculations indicate that somewhat lower fuel cycle costs can be expected from reactor operation in converter mode on 235 U make-up with fuel reprocessed in batches every 10 years to avoid fission product precipitation, than from operation as 233 U-Th breeder with continuous reprocessing. (auth.)

Vitamin K deficiency bleeding and early infant male circumcision in Africa.

Science.gov (United States)

Plank, Rebeca M; Steinmetz, Tara; Sokal, David C; Shearer, Martin J; Data, Santorino

2013-08-01

Early infant (1-60 days of life) male circumcision is being trialed in Africa as a human immunodeficiency virus prevention strategy. Postcircumcision bleeding is particularly concerning where most infants are breastfed, and thus these infants are at increased risk of vitamin K deficiency bleeding. During a circumcision trial, one infant bled for 90 minutes postprocedure. After discovering he had not received standard prophylactic vitamin K, we gave 2 mg phytomenadione (vitamin K1) intramuscularly; bleeding stopped within 30 minutes. Vitamin K's extremely rapid action is not commonly appreciated. Neonatal vitamin K has been shown to be cost-effective. To increase availability and promote awareness of its importance, especially in low-resource settings where blood products and transfusions are limited, vitamin K should be included in the World Health Organization's Model List of Essential Medicines for Children.

Market failures, consumer preferences, and transaction costs inenergy efficiency purchase decisions

Energy Technology Data Exchange (ETDEWEB)

Sathaye, Jayant; Murtishaw, Scott

2004-11-23

Several factors limit the energy savings potential and increase the costs of energy-efficient technologies to consumers. These factors may usefully be placed into two categories; one category is what economists would define as market failures and the other is related to consumer preferences. This paper provides a conceptual framework for understanding the roles of these factors, and develops a methodology to quantify their effects on costs and potentials of two energy efficient end uses - residential lighting and clothes washers. It notes the significant roles played by the high implicit cost of obtaining information about the benefits of the two technologies and the apparent inability to process and utilize information. For compact fluorescent lamps, this report finds a conservative estimate of the cost of conserved energy of 3.1 cents per kWh. For clothes washers, including water savings reduces the cost of conserved energy from 13.6 cents to 4.3 cents per equivalent kWh. Despite these benefits, market share remains low. About 18 million tons of CO2 could be saved cost effectively from 2005 sales of these two technologies alone. The paper also notes that trading of carbon emissions will incur transaction costs that will range from less than 10 cents per metric ton of CO2 for larger size projects and programs to a few dollars per metric ton of carbon for the smaller ones.

Cost Savings for Manufacturing Lithium Batteries in a Flexible Plant

Energy Technology Data Exchange (ETDEWEB)

Nelson, Paul A.; Ahmed, Shabbir; Gallagher, Kevin G.; Dees, Dennis W.

2015-06-01

The flexible plant postulated in this study would produces types of batteries for electric-drive vehicles of the types hybrid (HEV), 10-mile range and 40-mile range plug-in hybrids (PHEV) and a 150-mile range battery-electric (EV). The annual production rate of the plant is 235,000 per year (30,000 EV batteries and 100,000 HEV batteries). The unit cost savings as calculated with the Argonne BatPaC model for this flex plant vs. dedicated plants range from 8% for the EV battery packs to 23% for the HEV packs including the battery management systems (BMS). The investment cost savings are even larger, ranging from 21% for EVs to 43% for HEVs. The costs of the 1.0-kWh HEV batteries are projected to approach $710 per unit and that of the EV batteries $228 per kWh with the most favorable cell chemistries and including the BMS. The best single indicator of the cost of producing lithium-manganate spinel/graphite batteries in a flex plant is the total cell area of the battery. For the four batteries studied, the price range is $20-24 per m2 of cell area including the cost of the BMS, averaging $21 per m2 for the entire flex plant.

Life-cycle cost and impacts: alternatives for managing KE basin sludge

International Nuclear Information System (INIS)

Johnson, L.M.

1997-01-01

This document presents the results of a life-cycle cost and impacts evaluation of alternatives for managing sludge that will be removed from the K Basins. The two basins are located in the 100-K Area of the Hanford Site. This evaluation was conducted by Fluor Daniel Hanford, Inc. (FDH) and its subcontractors to support decisions regarding the ultimate disposition of the sludge. The long-range plan for the Hanford Site calls for spent nuclear fuel (SNF), sludge, debris, and water to be removed from the K East (KE) and K West (KW) Basins. This activity will be conducted as a removal action under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The scope of the CERCLA action will be limited to removing the SNF, sludge, debris, and water from the basins and transferring them to authorized facilities for interim storage and/or treatment and disposal. The scope includes treating the sludge and water in the 100-K Area prior to the transfer. Alternatives for the removal action are evaluated in a CERCLA engineering evaluation/cost analysis (EE/CA) and include different methods for managing sludge from the KE Basins. The scope of the removal action does not include storing, treating, or disposing of the sludge once it is transferred to the receiving facility and the EE/CA does not evaluate those downstream activities. This life-cycle evaluation goes beyond the EE/CA and considers the full life-cycle costs and impacts of dispositioning sludge

Manufacturing cost study on the ion sources for the Mirror Fusion Test Facility

International Nuclear Information System (INIS)

A study of the cost of manufacturing 48 ion sources for the Mirror Fusion Test Facility is described. The estimate is built up from individual part costs and assembly operation times for the 80 kV prototype source constructed by LLL and described by LLL drawings furnished during December 1978. Recommendations for cost reduction are made

Distance-Based Image Classification: Generalizing to New Classes at Near Zero Cost

NARCIS (Netherlands)

Mensink, T.; Verbeek, J.; Perronnin, F.; Csurka, G.

2013-01-01

We study large-scale image classification methods that can incorporate new classes and training images continuously over time at negligible cost. To this end, we consider two distance-based classifiers, the k-nearest neighbor (k-NN) and nearest class mean (NCM) classifiers, and introduce a new

External costs of nuclear: Greater or less than the alternatives?

International Nuclear Information System (INIS)

Rabl, Ari; Rabl, Veronika A.

2013-01-01

Since Fukushima many are calling for a shutdown of nuclear power plants. To see whether such a shutdown would reduce the risks for health and environment, the external costs of nuclear electricity are compared with alternatives that could replace it. The frequency of catastrophic nuclear accidents is based on the historical record, about one in 25 years for the plants built to date, an order of magnitude higher than the safety goals of the U.S. Nuclear Regulatory Commission. Impacts similar to Chernobyl and Fukushima are assumed to estimate the cost. A detailed comparison is presented with wind as alternative with the lowest external cost. The variability of wind necessitates augmentation by other sources, primarily fossil fuels, because storage at the required scale is in most regions too expensive. The external costs of natural gas combined cycle are taken as 0.6 €cent/kWh due to health effects of air pollution and 1.25 €cent/kWh due to greenhouse gases (at 25€/t CO 2 eq ) for the central estimate, but a wide range of different parameters is also considered, both for nuclear and for the alternatives. Although the central estimate of external costs of the wind-based alternative is higher than that of nuclear, the uncertainty ranges overlap. - Highlights: ► The external costs of nuclear electricity are compared with the alternatives. ► Frequency and cost of nuclear accidents based on Chernobyl and Fukushima. ► Detailed comparison with wind as alternative with the lowest external costs. ► High external cost of wind because of natural gas backup (storage too limited). ► External costs of wind higher than nuclear but uncertainty ranges overlap

K basins sludge removal sludge pretreatment system

International Nuclear Information System (INIS)

Chang, H.L.

1997-01-01

The Spent Nuclear Fuels Program is in the process of planning activities to remove spent nuclear fuel and other materials from the 100-K Basins as a remediation effort for clean closure. The 105 K- East and K-West Basins store spent fuel, sludge, and debris. Sludge has accumulated in the 1 00 K Basins as a result of fuel oxidation and a slight amount of general debris being deposited, by settling, in the basin water. The ultimate intent in removing the sludge and fuel is to eliminate the environmental risk posed by storing fuel at the K Basins. The task for this project is to disposition specific constituents of sludge (metallic fuel) to produce a product stream through a pretreatment process that will meet the requirements, including a final particle size acceptable to the Tank Waste Remediation System (TWRS). The purpose of this task is to develop a preconceptual design package for the K Basin sludge pretreatment system. The process equipment/system is at a preconceptual stage, as shown in sketch ES-SNF-01 , while a more refined process system and material/energy balances are ongoing (all sketches are shown in Appendix C). Thus, the overall process and 0535 associated equipment have been conservatively selected and sized, respectively, to establish the cost basis and equipment layout as shown in sketches ES- SNF-02 through 08

Life-Cycle-Cost Analysis of the Microwave Landing System Ground and Airborne Systems

Science.gov (United States)

1981-10-01

READ(2tI019) RTSEI(JK)PSMTE4F(JtK)giSMTTR(JPK) READ(291019) SFITT(JK)tSUCOS(JYK)vWTE4(JgK) C LUCOS(J) = LUCOS(J) + NOSRU(JvK)* SUCOS (JTK) IF (SMTE4F...JtK) .NE. 0) 1 LMTE4F(J) = LMTEIF(J) + (NOSRU(JYK)/SMTBF(JvK)) WT(J) = LJT(J) 3 WTEB(JPK) C C *RECALCULATE SUCOS TO ACCOUNT FOR DIISTRIBtUTION COST C... SUCOS (JvK) = SUCOS (JPK)*(1 + SIAIST) 53MTE4F(JtK) = SMTB:F(JvK)/KFAC BMCS(Jd() = BMCS(JTK)*KFAC [IMCS(JiK) = DMCS(JPK)*KFAC so CONTINUE C 35 LUCOS(J

Colourings of (k-r,k-trees

Directory of Open Access Journals (Sweden)

M. Borowiecki

2017-01-01

Full Text Available Trees are generalized to a special kind of higher dimensional complexes known as \\((j,k\\-trees ([L. W. Beineke, R. E. Pippert, On the structure of \\((m,n\\-trees, Proc. 8th S-E Conf. Combinatorics, Graph Theory and Computing, 1977, 75-80], and which are a natural extension of \\(k\\-trees for \\(j=k-1\\. The aim of this paper is to study\\((k-r,k\\-trees ([H. P. Patil, Studies on \\(k\\-trees and some related topics, PhD Thesis, University of Warsaw, Poland, 1984], which are a generalization of \\(k\\-trees (or usual trees when \\(k=1\\. We obtain the chromatic polynomial of \\((k-r,k\\-trees and show that any two \\((k-r,k\\-trees of the same order are chromatically equivalent. However, if \\(r\

Adolescent Alcohol and Marijuana Consumption: Is There Really a Gateway Effect?

OpenAIRE

Rosalie Liccardo Pacula

1998-01-01

This research analyzes the contemporaneous and intertemporal relationship between the demands for alcohol and marijuana by youths and young adults. A general theory of multi-commodity habit formation is developed and tested using data from the 1983-1984 waves of the National Longitudinal Survey of Youth. An Adjusted Tobit specification is employed for estimating the empirical model. Habit persistence is distinguished from unobserved heterogeneity through a reduced form instrumental variable t...

Externality costs of the coal-fuel cycle: The case of Kusile Power Station

Directory of Open Access Journals (Sweden)

Nonophile P. Nkambule

2017-09-01

Full Text Available Coal-based electricity is an integral part of daily life in South Africa and globally. However, the use of coal for electricity generation carries a heavy cost for social and ecological systems that goes far beyond the price we pay for electricity. We developed a model based on a system dynamics approach for understanding the measurable and quantifiable coal-fuel cycle burdens and externality costs, over the lifespan of a supercritical coal-fired power station that is fitted with a flue-gas desulfurisation device (i.e. Kusile Power Station. The total coal-fuel cycle externality cost on both the environment and humans over Kusile's lifespan was estimated at ZAR1 449.9 billion to ZAR3 279 billion or 91c/kWh to 205c/kWh sent out (baseline: ZAR2 172.7 billion or 136c/kWh. Accounting for the life-cycle burdens and damages of coal-derived electricity conservatively, doubles to quadruples the price of electricity, making renewable energy sources such as wind and solar attractive alternatives. Significance: The use of coal for electricity generation carries a heavy cost for social and ecological systems that goes far beyond the price we pay for electricity. The estimation of social costs is particularly important to the electric sector because of non-differentiation of electricity prices produced from a variety of sources with potentially very dissimilar environmental and human health costs. Because all electricity generation technologies are associated with undesirable side effects in their fuelcycle and lifespan, comprehensive comparative analyses of life-cycle costs of all power generation technologies is indispensable to guide the development of future energy policies in South Africa.

K-K-K-Kuninga kõne / Peter Conradi ; tõlkinud Kadri Karro

Index Scriptorium Estoniae

Conradi, Peter

2011-01-01

The Sunday Timesi ajakirjanik valgustab filmi "Kuninga kõne" (režissöör Tom Hooper, Inglise-Austraalia-USA, 2010) tagamaid. Film räägib kuningas George VI elust ja tema kõnedefektist, kogelemisest. Kuningat aitas Austraalia päritolu kõneterapeut Lionel Logue. Filmi stsenaariumi kirjutas David Seidler

Compact 250-kV injector system for PIGMI

International Nuclear Information System (INIS)

Hamm, R.W.; Stevens, R.R. Jr.; Mueller, D.W.; Lederer, H.M.

1978-01-01

A 250-kV proton injector to be used in the development of a linac suitable for medical applications has been constructed. This injector utilizes a spherical Pierce geometry to produce a converging beam. A gas insulated accelerating column is cantilevered on a grounded vacuum system, with a separate high voltage equipment dome connected to a 300-kV Cockcroft-Walton power supply. The injector can be operated locally or remotely, with the remote control accomplished by a microprocessor system linked to a central control minicomputer. This injector has been designed as a low-cost compact system. The design details and the data obtained during initial operation are presented

Dalitz plot analysis of D0 hadronic decays D0->K0K-pi+, D0->antiK0K+pi- and D0->antiK0K+K-

International Nuclear Information System (INIS)

Palano, Antimo

2002-01-01

A Dalitz plot analysis of the D 0 hadronic decays D 0 → K 0 K - π + , D 0 → (bar K) 0 K + π - and D 0 → (bar K) 0 K + K - is presented. This analysis is based on a data sample of 22 fb -1 collected with the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC running on or near the Υ(4S) resonance. The events are selected from continuum e + e - annihilations using the decay D* + → D 0 π + . Preliminary measurements of the branching fractions of the above hadronic decays are obtained. Preliminary estimates of fractions and phases for resonant and nonresonant contributions to the Dalitz plot are also presented

In the balance. The social costs and benefits of PV

Energy Technology Data Exchange (ETDEWEB)

Olsen, C. [ECN Solar Energy, Petten (Netherlands)

2013-10-16

For more than a decade, the growth in PV markets surpassed expectations. Then, in 2012, the European market declined for the first time compared with the previous year. As policymakers' support for PV hesitates over the costs to society of this technology, it is timely to take an overview of the social costs and benefits, also referred to as the 'external costs', of PV electricity. In this article, these costs are put into perspective vis-a-vis those associated with conventional electricity-generating technologies. The external costs of electricity can be broken down into: (1) the environmental and health costs; (2) the costs of subsidies and energy security; and (3) the costs for grid expansion and reliability. Included in these costs are the increased insurance, health, social and environmental costs associated with damages to health, infrastructure and environment, as well as tax payments that subsidize producers of electricity or fuels, their markets and the electricity infrastructure. A life cycle assessment (LCA) of the environmental impact is used in the quantification of the associated environmental and health costs. Because the environmental footprint of PV electricity is highly dependent on the electricity mix used in PV module fabrication, the environmental indicators are calculated for PV electricity manufactured using different electricity mixes, and compared with those for the European electricity mix (UCTE), and electricity generated by burning 100% coal or 100% natural gas. In 2012 USD, coal electricity requires 19-29 eurocent/kWh above the market price, compared with 1-1.6 eurocent/kWh for PV manufactured with 100% coal electricity. The sum of the subsidies, avoided fossil-fuel imports and energy security, and the economic stimulation associated with PV electricity deployment, amounts to net external benefits. Integrating high penetrations of renewables, with the same reliability as we have today, appears to be fully feasible and

Design and testing of 45 kV, 50 kHz pulse power supply for dielectric barrier discharges

Science.gov (United States)

Sharma, Surender Kumar; Shyam, Anurag

2016-10-01

The design, construction, and testing of high frequency, high voltage pulse power supply are reported. The purpose of the power supply is to generate dielectric barrier discharges for industrial applications. The power supply is compact and has the advantage of low cost, over current protection, and convenient control for voltage and frequency selection. The power supply can generate high voltage pulses of up to 45 kV at the repetitive frequency range of 1 kHz-50 kHz with 1.2 kW input power. The output current of the power supply is limited to 500 mA. The pulse rise time and fall time are less than 2 μs and the pulse width is 2 μs. The power supply is short circuit proof and can withstand variable plasma load conditions. The power supply mainly consists of a half bridge series resonant converter to charge an intermediate capacitor, which discharges through a step-up transformer at high frequency to generate high voltage pulses. Semiconductor switches and amorphous cores are used for power modulation at higher frequencies. The power supply is tested with quartz tube dielectric barrier discharge load and worked stably. The design details and the performance of the power supply on no load and dielectric barrier discharge load are presented.

Preliminary engineering design and cost of Advanced Compressed-Air Storage (ACAS) A-5 hybrid

Science.gov (United States)

Sosnowicz, E. J.; Blackman, J.; Woodhull, A. S.; Zaugg, P.

1981-08-01

The advanced compressed air energy (ACAS) plant investiated operates on a partial adiabatic, partial fuel fired cycle. Only a limited advancement in state-of-the-art technology is projected for this hybrid arrangement. The A-5 hybrid systems stores the heat of compression from the low pressure and intermediate pressure compressors in a thermal energy store (TES). The heat collected in the TES is available for preheating the air from the storage cavern prior to its entering the low pressure turbine combustor. This reduces the amount of fuel consumed during power generation. The fuel heat rate for the hybrid cycle is 2660 Btu/kWh as compared to approximately 4000 Btu/kWh for a conventional CAES plant. A virtual stand-off between the hybrid plant and a conventional CAES plant at 235 mills/kWh in 1990 dollars is shown. With a lower cost and increased fuel cost projections, the hybrid system operating cost is less than that for a conventional CAES plant.

Costs to Automate Demand Response - Taxonomy and Results from Field Studies and Programs

Energy Technology Data Exchange (ETDEWEB)

Piette, Mary A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schetrit, Oren [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cheung, Iris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Li, Becky Z [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-07-31

During the past decade, the technology to automate demand response (DR) in buildings and industrial facilities has advanced significantly. Automation allows rapid, repeatable, reliable operation. This study focuses on costs for DR automation in commercial buildings with some discussion on residential buildings and industrial facilities. DR automation technology relies on numerous components, including communication systems, hardware and software gateways, standards-based messaging protocols, controls and integration platforms, and measurement and telemetry systems. This report compares cost data from several DR automation programs and pilot projects, evaluates trends in the cost per unit of DR and kilowatts (kW) available from automated systems, and applies a standard naming convention and classification or taxonomy for system elements. Median costs for the 56 installed automated DR systems studied here are about $200/kW. The deviation around this median is large with costs in some cases being an order of magnitude great or less than the median. This wide range is a result of variations in system age, size of load reduction, sophistication, and type of equipment included in cost analysis. The costs to automate fast DR systems for ancillary services are not fully analyzed in this report because additional research is needed to determine the total cost to install, operate, and maintain these systems. However, recent research suggests that they could be developed at costs similar to those of existing hot-summer DR automation systems. This report considers installation and configuration costs and does include the costs of owning and operating DR automation systems. Future analysis of the latter costs should include the costs to the building or facility manager costs as well as utility or third party program manager cost.

A seismic performance and cost comparison of top and bottom supported liquid metal reactor vessels

International Nuclear Information System (INIS)

Carlson, T.M.; Kiciman, O.K.; Petrozelli, J.F.

1989-01-01

It is the premise of this paper that the revision of a pool LMR from a TSRV configuration to a specific bottom supported reactor vessel (BSRV) configuration can resolve the above TSRV disadvantages related to load path length and diversity, thereby improving seismic performance and simultaneously reducing RV block costs by reducing weights. This paper demonstrates this premise by comparing a reference TSRV block with a specific BSRV block design. Recent capital cost estimates ($/kWe) for U.S. liquid metal reactor (LMR) plant designs reveal that the balance of plant costs could be reduced below that of the balance of plant costs for a comparable light water reactor plant. However, in regions of high seismicity, non-seismically isolated LMR nuclear steam supply system weights are costs per kWe are two to three times the weights and costs of light water reactor nuclear steam supply systems. While all portions of the LMR nuclear steam supply system require examination for potential cost reductions, the focus of this paper is the reactor vessel (RV) block for a large pool plant

State and location dependence of action potential metabolic cost in cortical pyramidal neurons

NARCIS (Netherlands)

Hallermann, Stefan; de Kock, Christiaan P. J.; Stuart, Greg J.; Kole, Maarten H. P.

2012-01-01

Action potential generation and conduction requires large quantities of energy to restore Na+ and K+ ion gradients. We investigated the subcellular location and voltage dependence of this metabolic cost in rat neocortical pyramidal neurons. Using Na+/K+ charge overlap as a measure of action

State and location dependence of action potential metabolic cost in cortical pyramidal neurons

NARCIS (Netherlands)

Hallermann, S.; de Kock, C.P.J.; Stuart, G.J.; Kole, M.H.

2012-01-01

Action potential generation and conduction requires large quantities of energy to restore Na + and K + ion gradients. We investigated the subcellular location and voltage dependence of this metabolic cost in rat neocortical pyramidal neurons. Using Na +K + charge overlap as a measure of action

Assessing the Cost of Large-Scale Power Outages to Residential Customers.

Science.gov (United States)

Baik, Sunhee; Davis, Alexander L; Morgan, M Granger

2018-02-01

Residents in developed economies depend heavily on electric services. While distributed resources and a variety of new smart technologies can increase the reliability of that service, adopting them involves costs, necessitating tradeoffs between cost and reliability. An important input to making such tradeoffs is an estimate of the value customers place on reliable electric services. We develop an elicitation framework that helps individuals think systematically about the value they attach to reliable electric service. Our approach employs a detailed and realistic blackout scenario, full or partial (20 A) backup service, questions about willingness to pay (WTP) using a multiple bounded discrete choice method, information regarding inconveniences and economic losses, and checks for bias and consistency. We applied this method to a convenience sample of residents in Allegheny County, Pennsylvania, finding that respondents valued a kWh for backup services they assessed to be high priority more than services that were seen as low priority ($0.75/kWh vs. $0.51/kWh). As more information about the consequences of a blackout was provided, this difference increased ($1.2/kWh vs. $0.35/kWh), and respondents' uncertainty about the backup services decreased (Full: $11 to $9.0, Partial: $13 to $11). There was no evidence that the respondents were anchored by their previous WTP statements, but they demonstrated only weak scope sensitivity. In sum, the consumer surplus associated with providing a partial electric backup service during a blackout may justify the costs of such service, but measurement of that surplus depends on the public having accurate information about blackouts and their consequences. © 2017 Society for Risk Analysis.

Future perspective of cost for nuclear power generation

International Nuclear Information System (INIS)

Maeda, Ichiro

1988-01-01

The report presents and discussed results of evaluation of the cost for power generation in this and forthcoming years on the basis of an analysis of the current fuel prices and the economics of various power sources. Calculations show that nuclear power generation at present is inferior to coal-firing power generation in terms of required costs, but can become superior in the future due to an increased burn-up and reduced construction cost. Investigations are made of possible contributions of future technical improvements to reduction in the overall cost. Results suggest that nuclear power generation will be the most efficient among the various electric sources because of its technology-intensive feature. Development of improved light water reactors is of special importance to achieve a high burn-up and reduced construction costs. In general, the fixed cost accounts for a large part of the overall nuclear power generation cost, indicating that a reduction in construction cost can greatly increase the economic efficiency. Changes in the yen's exchange rate seem to have little effect on the economics of nuclear power generation, which represents another favorable aspect of this type of energy. (Nogami, K.)

Search for two-photon production of resonances decaying into K anti K and K anti K. pi

Energy Technology Data Exchange (ETDEWEB)

Althoff, M; Braunschweig, W; Kirschfink, F J; Martyn, H U; Rosskamp, R; Siebke, H; Wallraff, W; Eisenmann, J; Fischer, H M; Hartmann, H

1985-11-01

An analysis of the production of Ksub(s)/sup 0/Ksub(s)/sup 0/ and Ksup(+-)Ksub (s)/sup 0/..pi..sup(-+) by two quasi-real photons is presented. The cross section for ..gamma gamma..->K/sup 0/ anti K/sup 0/, which is given for the ..gamma gamma.. invariant mass range from K anti K threshold to 2.5 GeV, is dominated by the f'(1,525) resonance and an enhancement near the K anti K threshold. Upper limits on the product of the two-photon width times the branching ratio into K anti K pairs are given for THETA(1,700), h(2,030), and zeta(2,220). For exclusive two-photon production of Ksup(+-)Ksub(s)/sup 0/..pi..-+ no significant signal was observed. Upper limits are given on the cross section of ..gamma gamma..->K/sup +/ anti K/sup 0/..pi../sup -/ or K/sup -/K/sup 0/..pi../sup +/ between 1.4 and 3.2 GeV and on the product of the ..gamma gamma.. width times the branching ratio into the Kanti K..pi.. final states for the etasub(c)(2,980) and the iota(1,440), yielding GAMMA(..gamma gamma..->iota(1,440)) . BR(iota(1,440)-> K anti K..pi..) < 2.2keV at 95% C.L.

TSKT-ORAM: A Two-Server k-ary Tree Oblivious RAM without Homomorphic Encryption

Directory of Open Access Journals (Sweden)

Jinsheng Zhang

2017-09-01

Full Text Available This paper proposes TSKT-oblivious RAM (ORAM, an efficient multi-server ORAM construction, to protect a client’s access pattern to outsourced data. TSKT-ORAM organizes each of the server storages as a k-ary tree and adopts XOR-based private information retrieval (PIR and a novel delayed eviction technique to optimize both the data query and data eviction process. TSKT-ORAM is proven to protect the data access pattern privacy with a failure probability of 2 - 80 when system parameter k ≥ 128 . Meanwhile, given a constant-size local storage, when N (i.e., the total number of outsourced data blocks ranges from 2 16 – 2 34 , the communication cost of TSKT-ORAM is only 22–46 data blocks. Asymptotic analysis and practical comparisons are conducted to show that TSKT-ORAM incurs lower communication cost, storage cost and access delay in practical scenarios than the compared state-of-the-art ORAM schemes.

An Experimental Study of the Decay $D^0 \\to K^- K^- K^+ \\pi^+$

Energy Technology Data Exchange (ETDEWEB)

Devmal, Shiral Cleophas [Cincinnati U.

2000-05-01

Using data from the E791 experiment at Fermi National Accelerator Laboratory (Fermilab), we have studied the Cabibbo favored, but phase space suppressed decay $D^0 \\to K^-K^- K^+ \\pi^+$ with the normalization channel $D^0 \\to K^- \\pi^- \\pi^+ \\pi^+$. We report the branching ratio of $D^0 \\to K^- K^- K^+ \\pi^+$ relative to the branching ratio of $D^0 \\to K^- \\pi^- \\pi^+ \\pi^+$. This value is (0.54 $\\pm$ 0.13 $\\pm$ 0.07)%. We see a clear signal of $K^-K^+$ resonance in the decay $D^0 \\to K^-K^-K^+\\pi^+$ from which we conclude that about (60 $\\pm$ 30)% of $KKK\\pi$ comes from $D^0 \\to \\phi K^-\\pi^+; \\phi \\to K^-K^+$. We also set the range (0.30% - 0.90%) for the ratio $P_{q\\overline{q}} = P_{NoPop}$ where $P_{q\\bar{q}}$ is the contribution from either $D^0 \\to K^-K^-K^+\\pi^+$ terms that pop an $s\\bar{s}$ or corresponding $D^0 \\to K^- \\pi^- \\pi^+ \\pi^+$ terms that pop either $u\\bar{u}$ or $d\\bar{d}$ pair and $P_{NoPop}$ is the contributions from the $D^0 \\to K^- \\pi^- \\pi^+ \\pi^+$ terms that do not have such corresponding popping.

The cost of hemodialysis in a large hemodialysis center

Directory of Open Access Journals (Sweden)

Khalid Al Saran

2012-01-01

Full Text Available To assess the cost of hemodialysis (HD delivered at our center according to the treatment protocols based on the current Kidney Disease Outcome Quality Initiative (K/DOQI guidelines, we analyzed our cost data during the period from 1st of January 2007 to 30th of June 2010. The methods were used to determine both direct costs (related to dialysis treatment such as dialysis disposables, dialysis related drugs, medical personnel, out-patient medications, laboratory and other ancillary services and overhead costs (building, maintenance and engineering costs, housekeeping, and administrative personnel. During the study period, an average of 2,500 HD sessions per month were performed for 200 patients. The mean total cost per HD session was calculated as 297 US dollars (USD [1,114 Saudi Riyals (SR], and the mean total cost of dialysis per patient per year was 46,332 USD (173,784 SR. Direct costs contributed to 81.15% of the total cost from which the personnel cost represented 41.11% and dialysis disposables represented 13.64%, while medications (outpatient and intravenous dialysis related medications including albumin, erythropoiesis stimulating agents, iron and vitamin D3 accounted for 12.47% of the total cost. Our total cost level is well below the average cost in the industrialized countries.

Trends in nuclear power costs in Sweden

International Nuclear Information System (INIS)

Vesterhaugh, O.; Blomsnes, B.

1979-01-01

At the request of the Swedish Ministry of Industry, a study of the costs of nuclear power in Sweden was performed early this year. The main purpose of the study was to determine the real and projected costs of electricity produced by nuclear stations. The basis for the calculations of the study was the currently planned Swedish nuclear power programme consisting of 11 reactors of which six are operating, two waiting for start-up permission and the remainder are under construction. All cost components, relevant to the commercial programme were covered, with particular emphasis on future costs for handling of spent fuel, waste disposal and plant decommissioning. A capital depreciation time of 25 years and a 4 per cent effective annual interest rate (ie interest after correction for inflation) were assumed in the calculations given in December 1978 currency. The main result of the study is the average cost per kWh for the reactors. The results are in close agreement with the cost estimate given by the Swedish Energy Commission and now that the nuclear plants produce electricity considerably cheaper than other plants with the exception of some hydroelectric ones. (author)

Dalitz Plot Analysis of the Decay B+ -> K+K+K-

Energy Technology Data Exchange (ETDEWEB)

Dvoretskii, Alexei; /SLAC /Caltech

2006-05-05

The authors perform an analysis of the three-body charmless decay B{sup {+-}} {yields} K{sup {+-}}K{sup {+-}}K{sup {-+}} using a sample of 226.0 {+-} 2.5 million B{bar B} pairs collected by the BABAR detector and measure the total branching fraction and Cp asymmetry to be {beta} = (35.2 {+-} 0.9 {+-} 1.6) x 10{sup -6} and A{sub CP} = (-1.7 {+-} 2.6 {+-} 1.5)%. They fit the Dalitz plot distribution using an isobar model and report the measured values of magnitudes and phases of the production coefficients. The decay dynamics is dominated by the K{sup +}K{sup -} S-wave, for which we perform a partial-wave analysis in the region m(K{sup +}K{sup -}) < 2 GeV/c{sup 2}. They find no evidence of CP violation for individual components of the isobar model.

A Low-Cost Production Method of FeSi2 Power Generation Thermoelectric Modules

Science.gov (United States)

Inoue, Hiroyuki; Kobayashi, Takahide; Kato, Masahiko; Yoneda, Seiji

2016-03-01

A method is proposed to reduce the production cost of power generation thermoelectric modules. FeSi2 is employed as the thermoelectric material because of its low cost, low environmental load, and oxidation resistance. The raw materials were prepared in the composition of Fe0.96Si2.1Co0.04 for n-type and Fe0.92Si2.1Mn0.08 for p-type, which were added with 0.5 wt.% Cu as the starting materials. They were sintered without pressure at 1446 K to be formed into elements. The Seebeck coefficient and resistivity at room temperature were determined to be -182 μV/K and 0.13 mΩm for n-type, and 338 μV/K and 1.13 mΩm for p-type, respectively. The brazing conditions of the direct joining between the element and the solder were examined. Pastes of BNi-6, BNi-7 or TB-608T were tried as the solder. TB-608T was useable for metallizing of insulation substrates and joining of thermoelectric elements in order to manufacture thermoelectric modules. The joining strength was determined to be 50 MPa between the alumina plate and the elements. No mechanical failure was observed in the modules after repetition of 10 or more exposures to a heat source of 670 K. No change was found in the internal resistance. The present production method will provide modules with high durability and low production cost, which will enable high-power multi-stage cascade modules at a reasonable cost.

A Novel k-out-of-n Oblivious Transfer Protocol from Bilinear Pairing

Directory of Open Access Journals (Sweden)

Jue-Sam Chou

2012-01-01

Full Text Available Oblivious transfer (OT protocols mainly contain three categories: 1-out-of-2 OT, 1-out-of-n OT, and k-out-of-n OT. In most cases, they are treated as cryptographic primitives and are usually executed without consideration of possible attacks that might frequently occur in an open network, such as an impersonation, replaying, or man-in-the-middle attack. Therefore, when used in certain applications, such as mental poker games and fair contract signings, some extra mechanisms must be combined to ensure the security of the protocol. However, after a combination, we found that very few of the resulting schemes are efficient enough in terms of communicational cost, which is a significant concern for generic commercial transactions. Therefore, we propose a novel k-out-of-n oblivious transfer protocol based on bilinear pairing, which not only satisfies the requirements of a k-out-of-n OT protocol, but also provides mutual authentication to resist malicious attacks. Meanwhile, it is efficient in terms of communication cost.

Privatisation and regulation - the effect on the U.K. gas industry

International Nuclear Information System (INIS)

Price, C.

1991-01-01

The U.K. gas industry is a monopolist, privatised in 1986 and subject to partial regulation and general monopoly policy. From April 1992 a new regulatory regime will be applied. This paper explores the impact of privatisation and partial regulation in the gas industry during the first quinquennium and illustrates the issues for regulation and pricing where costs are common to regulated and unregulated sectors. Attributable costs of gas supply are derived and a 'marginal cost' based tariff suggested. This is used as a basis for examining the industry's pricing policy in its several markets, and to analyse its response to privatisation and the regulation it has experienced. (Author)

Possibility of material cost reduction toward development of low-cost second-generation superconducting wires

Science.gov (United States)

Ichinose, Ataru; Horii, Shigeru; Doi, Toshiya

2017-10-01

Two approaches to reducing the material cost of second-generation superconducting wires are proposed in this paper: (1) instead of the electrical stabilizing layers of silver and copper presently used on the superconducting layer, a Nb-doped SrTiO3 conductive buffer layer and cube-textured Cu are proposed as an advanced architecture, and (2) the use of an electromagnetic (EM) steel tape as a metal substrate of coated conductors in a conventional architecture. In structures fabricated without using electrical stabilizing layers on the superconducting layer, the critical current density achieved at 77 K in a self-field was approximately 2.6 MA/cm2. On the other hand, in the case of using EM steel tapes, although the critical current density was far from practical at the current stage, the biaxial alignment of YBa2Cu3O y (YBCO) and buffer layers was realized without oxidation on the metal surface. In this study, the possibility of material cost reduction has been strongly indicated toward the development of low-cost second-generation superconducting wires in the near future.

Low-cost superhouse for any builder

Energy Technology Data Exchange (ETDEWEB)

Godolphin, D.

1983-01-01

The National Center for Appropriate Technology has now made available the second of their two plans for superinsulated houses. This design provides 1500 ft/sup 2/ for a cost of about $40/ft/sup 2/ to the contractor. It features R-40 wall systems, air-to-air heat exchanger and back-up baseboard electric resistance heaters. The annual heating requirements for the first plan, a 900 ft/sup 2/ house, were estimated using the CALPAS 3 computer program developed by the Berkeley Solar Group, California. They found that it would require from 1.2 to 1.4 Btu//sup 0/F-day ft/sup 2/ in climates ranging from 6200 to 9600 heating degree days. Thus, in Great Falls, Montana, with 7652 heating degree days and electricity that costs about 3 cents/kWh back up heat for the house should cost less than $120/year.

A reciprocal framework for spatial K-anonymity

KAUST Repository

Ghinita, Gabriel; Zhao, Keliang; Papadias, Dimitris; Kalnis, Panos

2010-01-01

Spatial K-anonymity (SKA) exploits the concept of K-anonymity in order to protect the identity of users from location-based attacks. The main idea of SKA is to replace the exact location of a user U with an anonymizing spatial region (ASR) that contains at least K-1 other users, so that an attacker can pinpoint U with probability at most 1/K. Simply generating an ASR that includes K users does not guarantee SKA. Previous work defined the reciprocity property as a sufficient condition for SKA. However, the only existing reciprocal method, Hilbert Cloak, relies on a specialized data structure. In contrast, we propose a general framework for implementing reciprocal algorithms using any existing spatial index on the user locations. We discuss ASR construction methods with different tradeoffs on effectiveness (i.e., ASR size) and efficiency (i.e., construction cost). Then, we present case studies of applying our framework on top of two popular spatial indices (namely, R*-trees and Quad-trees). Finally, we consider the case where the attacker knows the query patterns of each user. The experimental results verify that our methods outperform Hilbert Cloak. Moreover, since we employ general-purpose spatial indices, the proposed system is not limited to anonymization, but supports conventional spatial queries as well. © 2009 Elsevier B.V. All rights reserved.

A reciprocal framework for spatial K-anonymity

KAUST Repository

Ghinita, Gabriel

2010-05-01

Spatial K-anonymity (SKA) exploits the concept of K-anonymity in order to protect the identity of users from location-based attacks. The main idea of SKA is to replace the exact location of a user U with an anonymizing spatial region (ASR) that contains at least K-1 other users, so that an attacker can pinpoint U with probability at most 1/K. Simply generating an ASR that includes K users does not guarantee SKA. Previous work defined the reciprocity property as a sufficient condition for SKA. However, the only existing reciprocal method, Hilbert Cloak, relies on a specialized data structure. In contrast, we propose a general framework for implementing reciprocal algorithms using any existing spatial index on the user locations. We discuss ASR construction methods with different tradeoffs on effectiveness (i.e., ASR size) and efficiency (i.e., construction cost). Then, we present case studies of applying our framework on top of two popular spatial indices (namely, R*-trees and Quad-trees). Finally, we consider the case where the attacker knows the query patterns of each user. The experimental results verify that our methods outperform Hilbert Cloak. Moreover, since we employ general-purpose spatial indices, the proposed system is not limited to anonymization, but supports conventional spatial queries as well. © 2009 Elsevier B.V. All rights reserved.

Impacts of ASEAN Agricultural Trade Liberalization on ASEAN-6 Economies and Income Distribution in Indonesia

OpenAIRE

Rina Oktaviani; Eka Puspitawati; Haryadi

2008-01-01

This research paper intends to analyse: (a) the impacts of ASEAN trade liberalization on the macroeconomy variables – gross domestic product (GDP), Terms of Trade (ToT), balance of trade, inflation and real wage – and agricultural industries (output, exports and imports) in the ASEAN 6 countries (Indonesia, Malaysia, the Philippines, Thailand, Singapore, and Viet Nam); and (b) the impact of trade liberalization on income distribution in Indonesia. A multi-country and multi-commodity computabl...

Processing cost of RVNRL (Radiation Vulcanised Natural Rubber Latex)

International Nuclear Information System (INIS)

Wan Manshol Wan Zin; Meor Yahya Razali; Norjanah Mohd

1996-01-01

The main components contributing to the cost of building a pilot plant for RVNRL are highlighted. The fixed cost and operating cost of a pilot plant were determined and the production capacity and the cost to prepare I kg of RVNRL were calculated. Two sets of calculations were presented. A set was based on a pilot plant installed with cobalt-60 source of 150 kCi and another set was based on a plant installed with cobalt-60 source of I MCi. The effect of different power utilisation efficiencies and the effect of different vulcanization doses on the production capacities are presented.In general, a small difference in the vulcanization dose and power utilisation efficiency result in a significant change in the production capacity and the cost for RVNRL preparation. Depending on the production capacity, the cost for preparing RVNRL of 50% total solid content can be as low as RM 0.242 per kilograms

The cost effectiveness of pandemic influenza interventions: a pandemic severity based analysis.

Directory of Open Access Journals (Sweden)

George J Milne

Full Text Available BACKGROUND: The impact of a newly emerged influenza pandemic will depend on its transmissibility and severity. Understanding how these pandemic features impact on the effectiveness and cost effectiveness of alternative intervention strategies is important for pandemic planning. METHODS: A cost effectiveness analysis of a comprehensive range of social distancing and antiviral drug strategies intended to mitigate a future pandemic was conducted using a simulation model of a community of ∼30,000 in Australia. Six pandemic severity categories were defined based on case fatality ratio (CFR, using data from the 2009/2010 pandemic to relate hospitalisation rates to CFR. RESULTS: Intervention strategies combining school closure with antiviral treatment and prophylaxis are the most cost effective strategies in terms of cost per life year saved (LYS for all severity categories. The cost component in the cost per LYS ratio varies depending on pandemic severity: for a severe pandemic (CFR of 2.5% the cost is ∼$9 k per LYS; for a low severity pandemic (CFR of 0.1% this strategy costs ∼$58 k per LYS; for a pandemic with very low severity similar to the 2009 pandemic (CFR of 0.03% the cost is ∼$155 per LYS. With high severity pandemics (CFR >0.75% the most effective attack rate reduction strategies are also the most cost effective. During low severity pandemics costs are dominated by productivity losses due to illness and social distancing interventions, while for high severity pandemics costs are dominated by hospitalisation costs and productivity losses due to death. CONCLUSIONS: The most cost effective strategies for mitigating an influenza pandemic involve combining sustained social distancing with the use of antiviral agents. For low severity pandemics the most cost effective strategies involve antiviral treatment, prophylaxis and short durations of school closure; while these are cost effective they are less effective than other strategies in

The Cost Effectiveness of Pandemic Influenza Interventions: A Pandemic Severity Based Analysis

Science.gov (United States)

Milne, George J.; Halder, Nilimesh; Kelso, Joel K.

2013-01-01

Background The impact of a newly emerged influenza pandemic will depend on its transmissibility and severity. Understanding how these pandemic features impact on the effectiveness and cost effectiveness of alternative intervention strategies is important for pandemic planning. Methods A cost effectiveness analysis of a comprehensive range of social distancing and antiviral drug strategies intended to mitigate a future pandemic was conducted using a simulation model of a community of ∼30,000 in Australia. Six pandemic severity categories were defined based on case fatality ratio (CFR), using data from the 2009/2010 pandemic to relate hospitalisation rates to CFR. Results Intervention strategies combining school closure with antiviral treatment and prophylaxis are the most cost effective strategies in terms of cost per life year saved (LYS) for all severity categories. The cost component in the cost per LYS ratio varies depending on pandemic severity: for a severe pandemic (CFR of 2.5%) the cost is ∼$9 k per LYS; for a low severity pandemic (CFR of 0.1%) this strategy costs ∼$58 k per LYS; for a pandemic with very low severity similar to the 2009 pandemic (CFR of 0.03%) the cost is ∼$155 per LYS. With high severity pandemics (CFR >0.75%) the most effective attack rate reduction strategies are also the most cost effective. During low severity pandemics costs are dominated by productivity losses due to illness and social distancing interventions, while for high severity pandemics costs are dominated by hospitalisation costs and productivity losses due to death. Conclusions The most cost effective strategies for mitigating an influenza pandemic involve combining sustained social distancing with the use of antiviral agents. For low severity pandemics the most cost effective strategies involve antiviral treatment, prophylaxis and short durations of school closure; while these are cost effective they are less effective than other strategies in reducing the

Optimal design of multi-state weighted k-out-of-n systems based on component design

International Nuclear Information System (INIS)

Li Wei; Zuo, Ming J.

2008-01-01

This paper presents a study on design optimization of multi-state weighted k-out-of-n systems. The studied system reliability model is more general than the traditional k-out-of-n system model. The system and its components are capable of assuming a whole range of performance levels, varying from perfect functioning to complete failure. A utility value corresponding to each state is used to indicate the corresponding performance level. A widely studied reliability optimization problem is the 'component selection problem', which involves selection of components with known reliability and cost characteristics. Less adequately addressed has been the problem of determining system cost and utility based on the relationships between component reliability, cost and utility. This paper addresses this topic. All the optimization problems dealt with in this paper can be categorized as either minimizing the expected total system cost subject to system reliability requirements, or maximizing system reliability subject to total system cost limitation. The resulting optimization problems are too complicated to be solved by traditional optimization approaches; therefore, genetic algorithm (GA) is used to solve them. Our results show that GA is a powerful tool for solving these kinds of problems

A Probability Analysis of the Generating Cost for APR1000+

Energy Technology Data Exchange (ETDEWEB)

Ha, Gag-Hyeon; Kim, Dae-Hun [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, cutting CO{sub 2} emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the APR1000+ development is to ensure export competitiveness in the developing countries in the Middle East and Southeast Asia. To that end, APR1000+(1,000MWe, 3.5 generation) will be developed based on APR+ (1,500MWe, 3.5 generation). And comparing to OPR1000(Korean Standard Nuclear power Plant, 2.5 generation), APR1000+ have many design features such as the 60 year design life time, comprehensive site requirement of 0.3g seismic design, stability improvement, operability improvement and provisions for severe accidents. In this simulation, the results of generating cost for APR1000+ preliminary conceptual design using a probability method was shown to be 48.37 ~ 74.22 won/kWh(median value 56.51 won/kWh). Those of OPR1000 was 42.08 ~ 61.77 won/kWh(median value 48.63 won/kWh). APR1000+ has -16.2% cost advantage over OPR1000 nuclear power plant. The main reason of this results is due to adding several safety designs.

The future cost of electrical energy storage based on experience rates

Science.gov (United States)

Schmidt, O.; Hawkes, A.; Gambhir, A.; Staffell, I.

2017-08-01

Electrical energy storage could play a pivotal role in future low-carbon electricity systems, balancing inflexible or intermittent supply with demand. Cost projections are important for understanding this role, but data are scarce and uncertain. Here, we construct experience curves to project future prices for 11 electrical energy storage technologies. We find that, regardless of technology, capital costs are on a trajectory towards US$340 ± 60 kWh-1 for installed stationary systems and US$175 ± 25 kWh-1 for battery packs once 1 TWh of capacity is installed for each technology. Bottom-up assessment of material and production costs indicates this price range is not infeasible. Cumulative investments of US$175-510 billion would be needed for any technology to reach 1 TWh deployment, which could be achieved by 2027-2040 based on market growth projections. Finally, we explore how the derived rates of future cost reduction influence when storage becomes economically competitive in transport and residential applications. Thus, our experience-curve data set removes a barrier for further study by industry, policymakers and academics.

COST MEASUREMENT AND COST MANAGEMENT IN TARGET COSTING

Directory of Open Access Journals (Sweden)

Moisello Anna Maria

2012-07-01

Full Text Available Firms are coping with a competitive scenario characterized by quick changes produced by internationalization, concentration, restructuring, technological innovation processes and financial market crisis. On the one hand market enlargement have increased the number and the segmentation of customers and have raised the number of competitors, on the other hand technological innovation has reduced product life cycle. So firms have to adjust their management models to this scenario, pursuing customer satisfaction and respecting cost constraints. In a context where price is a variable fixed by the market, firms have to switch from the cost measurement logic to the cost management one, adopting target costing methodology. The target costing process is a price driven, customer oriented profit planning and cost management system. It works, in a cross functional way, from the design stage throughout all the product life cycle and it involves the entire value chain. The process implementation needs a costing methodology consistent with the cost management logic. The aim of the paper is to focus on Activity Based Costing (ABC application to target costing process. So: -it analyzes target costing logic and phases, basing on a literary review, in order to highlight the costing needs related to this process; -it shows, through a numerical example, how to structure a flexible ABC model – characterized by the separation between variable, fixed in the short and fixed costs - that effectively supports target costing process in the cost measurement phase (drifting cost determination and in the target cost alignment; -it points out the effectiveness of the Activity Based Costing as a model of cost measurement applicable to the supplier choice and as a support for supply cost management which have an important role in target costing process. The activity based information allows a firm to optimize the supplier choice by following the method of minimizing the

K-12 Marketplace Sees Major Flow of Venture Capital

Science.gov (United States)

Ash, Katie

2012-01-01

The flow of venture capital into the K-12 education market has exploded over the past year, reaching its highest transaction values in a decade in 2011, industry observers say. They attribute that rise to such factors as a heightened interest in educational technology; the decreasing cost of electronic devices such as tablet computers, laptops,…

Active Commuting among K-12 Educators: A Study Examining Walking and Biking to Work

OpenAIRE

Bopp, Melissa; Hastmann, Tanis J.; Norton, Alyssa N.

2013-01-01

Background. Walking and biking to work, active commuting (AC) is associated with many health benefits, though rates of AC remain low in the US. K-12 educators represent a significant portion of the workforce, and employee health and associated costs may have significant economic impact. Therefore, the purpose of this study was to examine the current rates of AC and factors associated with AC among K-12 educators. Methods. A volunteer sample of K-12 educators (n = 437) was recruited to partici...

Lightweighting Impacts on Fuel Economy, Cost, and Component Losses

Energy Technology Data Exchange (ETDEWEB)

Brooker, A. D.; Ward, J.; Wang, L.

2013-01-01

The Future Automotive Systems Technology Simulator (FASTSim) is the U.S. Department of Energy's high-level vehicle powertrain model developed at the National Renewable Energy Laboratory. It uses a time versus speed drive cycle to estimate the powertrain forces required to meet the cycle. It simulates the major vehicle powertrain components and their losses. It includes a cost model based on component sizing and fuel prices. FASTSim simulated different levels of lightweighting for four different powertrains: a conventional gasoline engine vehicle, a hybrid electric vehicle (HEV), a plug-in hybrid electric vehicle (PHEV), and a battery electric vehicle (EV). Weight reductions impacted the conventional vehicle's efficiency more than the HEV, PHEV and EV. Although lightweighting impacted the advanced vehicles' efficiency less, it reduced component cost and overall costs more. The PHEV and EV are less cost effective than the conventional vehicle and HEV using current battery costs. Assuming the DOE's battery cost target of $100/kWh, however, the PHEV attained similar cost and lightweighting benefits. Generally, lightweighting was cost effective when it costs less than $6/kg of mass eliminated.

A Distributed Approach to Continuous Monitoring of Constrained k-Nearest Neighbor Queries in Road Networks

Directory of Open Access Journals (Sweden)

Hyung-Ju Cho

2012-01-01

Full Text Available Given two positive parameters k and r, a constrained k-nearest neighbor (CkNN query returns the k closest objects within a network distance r of the query location in road networks. In terms of the scalability of monitoring these CkNN queries, existing solutions based on central processing at a server suffer from a sudden and sharp rise in server load as well as messaging cost as the number of queries increases. In this paper, we propose a distributed and scalable scheme called DAEMON for the continuous monitoring of CkNN queries in road networks. Our query processing is distributed among clients (query objects and server. Specifically, the server evaluates CkNN queries issued at intersections of road segments, retrieves the objects on the road segments between neighboring intersections, and sends responses to the query objects. Finally, each client makes its own query result using this server response. As a result, our distributed scheme achieves close-to-optimal communication costs and scales well to large numbers of monitoring queries. Exhaustive experimental results demonstrate that our scheme substantially outperforms its competitor in terms of query processing time and messaging cost.

SU-E-T-54: Benefits of Biological Cost Functions

International Nuclear Information System (INIS)

Demirag, N

2014-01-01

Purpose: To verify the benefits of the biological cost functions. Methods: TG166 patients were used for the test case scenarios. Patients were planned using Monaco V5.0 (CMS/Elekta, St.Louis, MO) Monaco has 3 biological and 8 physical CFs. In this study the plans were optimized using 3 different scenarios. 1- Biological CFs only 2-Physical CFs only 3- Combination of Physical and Biological CFsMonaco has 3 biological CFs. Target EUD used for the targets, derived from the poisson cell kill model, has an α value that controls the cold spots inside the target. α values used in the optimization were 0.5 and 0.8. if cold spots needs to be penalized α value increased. Serial CF: it's called serial to mimic the behaviour of the serial organs, if a high k value like 12 or 14 is used it controls the maximum dose. Serial CF has a k parameter that is used to shape the whole dvh curve. K value ranges between 1–20. k:1 is used to control the mean dose, lower k value controls the mean dose, higher k value controls the higher dose, using 2 serial CFs with different k values controls the whole DVH. Paralel CF controls the percentage of the volume that tolerates higher doses than the reference dose to mimic the behaviour of the paralel organs. Results: It was possible to achive clinically accepted plans in all 3 scenarios. The benefit of the biological cost functions were to control the mean dose for target and OAR, to shape the DVH curve using one EUD value and one k value simplifies the optimization process. Using the biological CFs alone, it was hard to control the dose at a point. Conclusion: Biological CFs in Monaco doesn't require the ntcp/tcp values from the labs and useful to shape the whole dvh curve. I work as an applications support specialist for Elekta and I am a Ph.D. Student in Istanbul University for radiation therapy physics

First wall costs of an ion-beam fusion reactor

International Nuclear Information System (INIS)

Hovingh, J.

1977-08-01

This paper parametrically investigates the effects of microexplosion energy on the first wall costs of a 4000 MW/sub t/ ion-beam initiated, inertially confined fusion reactor for several first wall materials. The thermodynamic models and the results for microexplosion energies between 400 and 4000 MJ are presented. A solid stainless steel or a composite isotropic graphite over stainless steel first wall can operate for a year at a cost of 0.6 mills per kWh gross electric power output

Cost effects of international trade in meeting EU renewable electricity targets

International Nuclear Information System (INIS)

Voogt, M.H.; Uyterlinde, M.A.

2006-01-01

The European market for renewable electricity received a major stimulus from the adoption of the Directive on the Promotion of Renewable Electricity. The Directive specifies the indicative targets for electricity supply from renewable energy sources (RES-E) to be reached in European Union (EU) Member States in the year 2010. It also requires Member States to certify the origin of their renewable electricity production. This article presents a first EU-wide quantitative evaluation of the effects of meeting the targets, using an EU-wide system for tradable green certificates (TGC). We calculate the equilibrium price of green certificates and identify which countries are likely to export or import certificates. Cost advantages of participating in such an EU-wide trading scheme are determined for each of the Member States. Moreover, we identify which choice of technologies results in meeting targets at least costs. Results are obtained from a model that quantifies the effects of achieving the RES-E targets in the EU with and without trade. The article provides a brief insight in this model as well as the methodology that was used to specify cost potential curves for renewable electricity in each of the 15 EU Member States. Model calculations show that within the EU-wide TGC system, the total production costs of the last option needed to satisfy the overall EU RES-E target equals 9.2 eurocent/kWh. Assuming that the production price of electricity on the European power market would equal 3 eurocent/kWh in the year 2010, the indicative green certificate price equals 6.2 eurocent/kWh. We conclude that implementation of an EU-wide TGC system is a cost-efficient way of stimulating renewable electricity supply

Proceedings: The Appendix 'K' relief workshop

International Nuclear Information System (INIS)

1989-11-01

The licensing and operation of commercial LWRs were impacted significantly when Appendix 'K' requirements for loss-of-coolant accident (LOCA) and emergency core cooling systems (ECCS) analyses were implemented in 1974. The Appendix K requirements included both criteria and mandatory assumptions for LOCA analysis. Plants must meet these criteria, using analysis methods that have included very conservative assumptions, such as estimating decay heat energy as 20% greater than the 1971 American Nuclear Society standard. Additional constraints were placed on the application of specific models and correlations. The Appendix K requirements had a significant impact on licensing, analysis, fuel design, reload management, plant operation, and some supporting equipment. The overall impact of Appendix K could be translated into increased costs of millions of dollars per year to utilities. The Appendix 'K' Relief Workshop provided an improved understanding of the trade-offs -- both benefits and efforts required -- inherent in continuing to use existing analysis methods or adopting BE analysis under revised NRC rule. A range of options is available to each utility. The workshop explored options and benefits to the utility industry from LOCA/ECCS rule change. A forum for complete and open discussion of the issues germaine to the question of BE methodology versus existing methodology in view of LOCA/ECCS rule changes was incorporated. Both regulatory and utility perspectives on the implementation of proposed changes were discussed. Existing and planned efforts in developing and implementing BE uncertainty methodologies for plant-licensing application have been included. The individual papers have been cataloged separately

Application of a Low Cost Ceramic Filter for Recycling Sand Filter Backwash Water

Directory of Open Access Journals (Sweden)

Md Shafiquzzaman

2018-02-01

Full Text Available The aim of this study is to examine the application of a low cost ceramic filter for the treatment of sand filter backwash water (SFBW. The treatment process is comprised of pre-coagulation of SFBW with aluminum sulfate (Alum followed by continuous filtration usinga low cost ceramic filter at different trans-membrane pressures (TMPs. Jar test results showed that 20 mg/L of alum is the optimum dose for maximum removal of turbidity, Fe, and Mn from SFBW. The filter can be operated at a TMP between 0.6 and 3 kPa as well as a corresponding flux of 480–2000 L/m2/d without any flux declination. Significant removal, up to 99%, was observed forturbidity, iron (Fe, and manganese (Mn. The flux started to decline at 4.5 kPa TMP (corresponding flux 3280 L/m2/d, thus indicated fouling of the filter. The complete pore blocking model was found as the most appropriate model to explain the insight mechanism of flux decline. The optimum operating pressure and the permeate flux were found to be 3 kPa and 2000 L/m2/d, respectively. Treated SFBW by a low cost ceramic filter was found to be suitable to recycle back to the water treatment plant. The ceramic filtration process would be a low cost and efficient option to recycle the SFBW.

Development of cost-effective Nb3Sn conductors for the next generation hadron colliders

International Nuclear Information System (INIS)

Scanlan, R.M.; Dietderich, D.R.; Zeitlin, B.A.

2001-01-01

Significant progress has been made in demonstrating that reliable, efficient high field dipole magnets can be made with Nb 3 Sn superconductors. A key factor in determining whether these magnets will be a cost-effective solution for the next generation hadron collider is the conductor cost. Consequently, DOE initiated a conductor development program to demonstrate that Nb 3 Sn can be improved to reach a cost/performance value of $1.50/kA-m at 12T, 4.2K. The first phase of this program was initiated in Jan 2000, with the goal of improving the key properties of interest for accelerator dipole magnets--high critical current density and low magnetization. New world record critical current densities have been reported recently, and it appears that significant potential exists for further improvement. Although new techniques for compensating for magnetization effects have reduced the requirements somewhat, techniques for lowering the effective filament size while maintaining these high Jc values are a program priority. The next phase of this program is focused on reducing the conductor cost through substitution of lower cost raw materials and through process improvements. The cost drivers for materials and fabrication have been identified, and projects are being initiated to demonstrate cost reductions

A new algorithm for solving the inventory routing problem with direct shipment

Directory of Open Access Journals (Sweden)

Ali Hossein Mirzaei

2012-02-01

Full Text Available   In this paper a multi-commodity multi-period inventory routing problem in a two-echelon supply chain consisting of a manufacturer and a set of retailers has been studied. In addition to inventory management and distribution planning, production planning has also been considered in the above problem. The objective is to minimize total system cost that consists of production setup, inventory holding and distribution costs. The commodities are delivered to the retailers by an identical fleet of limited capacity vehicles through direct shipment strategy. Also it is assumed that production and storage capacity is limited and stockout is not allowed. Since similar problems without distribution planning are known as NP-hard, this is also an NP-hard problem. Therefore, in this paper, a new improved particle swarm optimization algorithm has been developed consisting of two distinguished phases for problem solving. First, the values of binary variables are determined using the proposed algorithm and then, the continuous variables are calculated by solving a linear programming model. Performance of the proposed algorithm has been compared with genetic and original particle swarm optimization algorithms using various samples of random problems. The findings imply significant performance of the proposed algorithm.         

(Super Variable Costing-Throughput Costing)

OpenAIRE

Çakıcı, Cemal

2006-01-01

(Super Variable Costing-Throughput Costing) The aim of this study is to explain the super-variable costing method which is a new subject in cost and management accounting and to show it’s working practicly.Shortly, super-variable costing can be defined as a costing method which is use only direct material costs in calculate of product costs and treats all costs except these (direct labor and overhead) as periad costs or operating costs.By using super-variable costing method, product costs ar...

Search for B^0 meson decays to \\pi^0 K^0_S K^0_S, \\eta K^0_S K^0_S, and \\eta^{\\prime}K^0_S K^0_S

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2009-05-08

We describe searches for B{sup 0} meson decays to the charmless final states {pi}{sup 0}K{sub S}{sup 0}K{sub S}{sup 0}, {eta}K{sub S}{sup 0}K{sub S}{sup 0}, and {eta}{prime}K{sub S}{sup 0}K{sub S}{sup 0}. The data sample corresponds to 467 x 10{sup 6} B{bar B} pairs produced in e{sup +}e{sup -} annihilation and collected with the BABAR detector at the SLAC National Accelerator Laboratory. We find no significant signals and determine the 90% confidence level upper limits on the branching fractions, in units of 10{sup -7}, {Beta}(B{sup 0} {yields} {pi}{sup 0}K{sub S}{sup 0}K{sub S}{sup 0}) < 12, {Beta}(B{sup 0} {yields} {eta}K{sub S}{sup 0}K{sub S}{sup 0}) < 10, and {Beta}(B{sup 0} {yields} {eta}{prime}K{sub S}{sup 0}K{sub S}{sup 0}) < 20.

The global kernel k-means algorithm for clustering in feature space.

Science.gov (United States)

Tzortzis, Grigorios F; Likas, Aristidis C

2009-07-01

Kernel k-means is an extension of the standard k -means clustering algorithm that identifies nonlinearly separable clusters. In order to overcome the cluster initialization problem associated with this method, we propose the global kernel k-means algorithm, a deterministic and incremental approach to kernel-based clustering. Our method adds one cluster at each stage, through a global search procedure consisting of several executions of kernel k-means from suitable initializations. This algorithm does not depend on cluster initialization, identifies nonlinearly separable clusters, and, due to its incremental nature and search procedure, locates near-optimal solutions avoiding poor local minima. Furthermore, two modifications are developed to reduce the computational cost that do not significantly affect the solution quality. The proposed methods are extended to handle weighted data points, which enables their application to graph partitioning. We experiment with several data sets and the proposed approach compares favorably to kernel k -means with random restarts.

Analysis of cost estimation and wind energy evaluation using wind energy conversion systems (WECS) for electricity generation in six selected high altitude locations in Nigeria

International Nuclear Information System (INIS)

Ohunakin, S. Olayinka; Ojolo, S. Joshua; Ogunsina, S. Babatunde; Dinrifo, R. Rufus

2012-01-01

Two commercial wind turbines namely AN Bonus 300 kW/33 and AN Bonus 1 MW/54 were technically assessed for electricity generation in six selected high altitude sites spreading across the North-West and North-East geopolitical regions of Nigeria by computing their capacity factors, annual power and energy outputs. The economic evaluation of using the two wind energy conversion systems (medium and large) for electric power generation in the selected locations were also estimated using the present value cost method. The results showed that capacity factors of the two turbines in the selected sites ranged between 4.6 and 43%. Average minimum cost per kW h was obtained in Kano as $0.0222/kW h with AN Bonus 1 MW while the highest average cost is $0.2074/kW h with AN Bonus 300 kW in Kaduna. The highest cost in each of the location was obtained with the medium WECs (AN Bonus 300 kW). In addition, Kano and Katsina were also found to be very economical for any of the adopted wind turbine models. Gusau and Kaduna, at cost of unit energy of about $0.30/kW h were found to be more profitable for non-connected electrical and mechanical applications (water pumping, battery charging) than diesel generator. - Highlights: ► All the locations considered have mean wind speeds above 4.8 m/s. ► Economical wind applications are possible in Kano and Katsina. ► Highest capacity factor and energy output are obtained using AN Bonus 1 MW in Kano. ► Specific cost of unit energy per kW h is cheaper using AN Bonus 1 MW.

Next-generation Algorithms for Assessing Infrastructure Vulnerability and Optimizing System Resilience

Energy Technology Data Exchange (ETDEWEB)

Burchett, Deon L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chen, Richard Li-Yang [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Phillips, Cynthia A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Richard, Jean-Philippe [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-05-01

This report summarizes the work performed under the project project Next-Generation Algo- rithms for Assessing Infrastructure Vulnerability and Optimizing System Resilience. The goal of the project was to improve mathematical programming-based optimization technology for in- frastructure protection. In general, the owner of a network wishes to design a network a network that can perform well when certain transportation channels are inhibited (e.g. destroyed) by an adversary. These are typically bi-level problems where the owner designs a system, an adversary optimally attacks it, and then the owner can recover by optimally using the remaining network. This project funded three years of Deon Burchett's graduate research. Deon's graduate advisor, Professor Jean-Philippe Richard, and his Sandia advisors, Richard Chen and Cynthia Phillips, supported Deon on other funds or volunteer time. This report is, therefore. essentially a replication of the Ph.D. dissertation it funded [12] in a format required for project documentation. The thesis had some general polyhedral research. This is the study of the structure of the feasi- ble region of mathematical programs, such as integer programs. For example, an integer program optimizes a linear objective function subject to linear constraints, and (nonlinear) integrality con- straints on the variables. The feasible region without the integrality constraints is a convex polygon. Careful study of additional valid constraints can significantly improve computational performance. Here is the abstract from the dissertation: We perform a polyhedral study of a multi-commodity generalization of variable upper bound flow models. In particular, we establish some relations between facets of single- and multi- commodity models. We then introduce a new family of inequalities, which generalizes traditional flow cover inequalities to the multi-commodity context. We present encouraging numerical results. We also consider the directed

Estimating Power Outage Cost based on a Survey for Industrial Customers

Science.gov (United States)

Yoshida, Yoshikuni; Matsuhashi, Ryuji

A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

Comparison of the costs of superconducting accelerator dipoles using NbTi, Nb3Sn and NbTiTa

International Nuclear Information System (INIS)

Hassenzahl, W.

1981-03-01

The present study, which is based on the assumption that future, high-energy accelerators will use superconductors, is a comparison of the costs of 5 to 12 Tesla NbTi, Nb 3 S/sub n/, and NbTiTa accelerator magnets operating at 4.2 K or 1.8 K. The object of this evaluation is not to determine the actual cost of future accelerators, rather, its purpose is to provide some rationale for research on the next generation of superconducting accelerator magnets. Thus, though the actual costs of accelerator magnets may be different from those given here, the comparisons are valid

Development costs for a nuclear electric propulsion stage.

Science.gov (United States)

Mondt, J. F.; Prickett, W. Z.

1973-01-01

Development costs are presented for an unmanned nuclear electric propulsion (NEP) stage based upon a liquid metal cooled, in-core thermionic reactor. A total of 120 kWe are delivered to the thrust subsystem which employs mercury ion engines for electric propulsion. This study represents the most recent cost evaluation of the development of a reactor power system for a wide range of nuclear space power applications. These include geocentric, and outer planet and other deep space missions. The development program is described for the total NEP stage, based upon specific development programs for key NEP stage components and subsystems.

Quasi-resonant K-K charge transfer

International Nuclear Information System (INIS)

Hagmann, S.; Cocke, C.L.; Richard, P.; Skutlartz, A.; Kelbch, S.; Schmidt-Boecking, H.; Schuch, R.

1983-01-01

The impact parameter dependence, P(b), of single and double K to K charge transfer have been deduced from the coincidences between K-Auger electrons and scattered particles for F 9+ + Ne and F 9+ + Ne collisions at 10 MeV and 4.4 MeV. The 4.4 MeV single K-K transfer probability exhibits oscillations with b. The P(b) for delta-electron emission is also reported. To obtain more details on the mechanism, K-Auger electron-Ne recoil ion coincidences are measured for both F 8+ and F 9+ projectiles. The relative amounts of recoil ions and of satellite and hypersatellite Auger transitions vary substantially with projectile charge state. 11 references, 11 figures

Nuclear power costs in the UK, and reply by Sweet, C

International Nuclear Information System (INIS)

Hunt, H.

1978-01-01

The criticisms made by Sweet in his article 'Nuclear Power Costs in the UK' (Energy Policy; 6:107 (1978)) that assessments of nuclear power costs have been based on incorrect methods and assumptions are here answered. The particular points in the original analysis considered are; inflation, forecasts, load factors, generating costs, R and D costs, and benefits from a nuclear programme. It is stated that the published literature shows that nuclear power costs have for a long time been critically compared with the cost of alternatives, using well tried systems-analysis techniques and that the charge that 'mistaken' techniques have been employed is simply not sustained by the evidence. In reply Sweet objects that although his estimates have been criticised yet neither a direct rebuttal nor any alternative figures have been offered and significantly, his estimate that the official figures understate the true costs of nuclear power was not challenged. Particular aspects of the argument considered are; escalation of nuclear building costs, coal and nuclear generating costs, recovering R and D costs, and the 100 GW programme. (U.K.)

How much electricity really costs. Comparison of the state subsidisation and overall social costs of conventional and renewable energy resources

International Nuclear Information System (INIS)

Kuechler, Swantje; Meyer, Bettina

2012-01-01

This study explains how the costs of electricity are an aggregate of different components. The electricity price paid by the end consumer contains not only the actual costs of energy production, which make up only about a third of the actual price in an average household, but also different surcharges such as network charges, electricity tax, value added tax and the concession levy. It furthermore contains the allocation charge stipulated by the Renewable Energy Law (EEG reallocation charge) as a means of allocating the costs of the subsidisation of electricity from renewable resources to the consumers. On the other hand conventional energy resources such as nuclear energy, hard coal and brown coal have substantially benefited over many decades from state subsidies in the form of financial aids, tax rebates and other promotive measures. The main difference between this and the subsidisation of renewable energy is that the costs of conventional energy resources are largely charged to the state budget rather than being made transparent in the electricity price. Based on an evaluation of the literature, data, interviews and the authors' own methodological deliberations this study makes a systematic comparison of the direct as well as indirect state subsidisation of renewable and conventional energy resources during the period from 1970 until 2012. The annual totals obtained for each energy resources are then set in relation to the share of that resource in overall electricity production, yielding specific subsidisation rates in terms of cents per kWh for each resource. This does not yet take into account the high consequential costs in the form of environmental damage and climate-related damage caused by fossil and nuclear fuels as well as the risks associated with the latter (collectively referred to as ''external costs''), all of which are charged to the polluters only at a small fraction of the true amount. The two cost categories of state

A new low-cost 10 ns pulsed K(a)-band radar.

Science.gov (United States)

Eskelinen, Pekka; Ylinen, Juhana

2011-07-01

Two Gunn oscillators, conventional intermediate frequency building blocks, and a modified GaAs diode detector are combined to form a portable monostatic 10 ns instrumentation radar for outdoor K(a)-band radar cross section measurements. At 37.8 GHz the radar gives +20 dBm output power and its tangential sensitivity is -76 dBm. Processing bandwidth is 125 MHz, which also allows for some frequency drift in the Gunn devices. Intra-pulse frequency chirp is less than 15 MHz. All functions are steered by a microcontroller. First measurements convince that the construction has a reasonable ability to reduce close-to-ground surface clutter and gives an effective way of resolving target detail. This is beneficial especially when amplitude fluctuations disturb measurements with longer pulses. The new unit operates on 12 V dc, draws a current of less than 3 A, and weighs 5 kg.

Cost optimization of wind turbines for large-scale offshore wind farms

International Nuclear Information System (INIS)

Fuglsang, P.; Thomsen, K.

1998-02-01

This report contains a preliminary investigation of site specific design of off-shore wind turbines for a large off-shore wind farm project at Roedsand that is currently being proposed by ELKRAFT/SEAS. The results were found using a design tool for wind turbines that involve numerical optimization and aeroelastic calculations of response. The wind climate was modeled in detail and a cost function was used to estimate costs from manufacture and installation. Cost of energy is higher for off-shore installations. A comparison of an off-shore wind farm site with a typical stand alone on-shore site showed an increase of the annual production of 28% due to the difference in wind climate. Extreme loads and blade fatigue loads were nearly identical, however,fatigue loads on other main components increased significantly. Optimizations were carried out to find the optimum overall off-shore wind turbine design. A wind turbine for the off-shore wind farm should be different compared with a stand-alone on-shore wind turbine. The overall design changed were increased swept area and rated power combined with reduced rotor speed and tower height. Cost was reduced by 12% for the final 5D/14D off-shore wind turbine from 0.306 DKr/kWh to 0.270 DKr/kWh. These figures include capital costs from manufacture and installation but not on-going costs from maintenance. These results make off-shore wind farms more competitive and comparable to the reference on-shore stand-alone wind turbine. A corresponding reduction of cost of energy could not be found for the stand alone on-shore wind turbine. Furthermore the fatigue loads on wind turbines in on-shore wind farms will increase and cost of energy will increase in favor of off-shore wind farms. (au) EFP-95; EU-JOULE-3; 21 tabs., 7 ills., 8 refs

Robust Management of Combined Heat and Power Systems via Linear Decision Rules

DEFF Research Database (Denmark)

Zugno, Marco; Morales González, Juan Miguel; Madsen, Henrik

2014-01-01

The heat and power outputs of Combined Heat and Power (CHP) units are jointly constrained. Hence, the optimal management of systems including CHP units is a multicommodity optimization problem. Problems of this type are stochastic, owing to the uncertainty inherent both in the demand for heat and...... linear decision rules to guarantee both tractability and a correct representation of the dynamic aspects of the problem. Numerical results from an illustrative example confirm the value of the proposed approach....

Determining the minimum mass and cost of a magnetic refrigerator

DEFF Research Database (Denmark)

Bjørk, Rasmus; Smith, Anders; Bahl, Christian Robert Haffenden

2011-01-01

An expression is determined for the mass of the magnet and magnetocaloric material needed for a magnetic refrigerator and these are determined using numerical modeling for both parallel plate and packed sphere bed regenerators as function of temperature span and cooling power. As magnetocaloric......, respectively, the cheapest 100 W parallel plate refrigerator with a temperature span of 20 K using Gd and a Halbach magnet has 0.8 kg of magnet, 0.3 kg of Gd and a cost of $35. Using the constant material reduces this cost to $25. A packed sphere bed refrigerator with the constant material costs $7. It is also...

Impact of improvements in HYLIFE-II on safety, performance and cost

International Nuclear Information System (INIS)

Hoffman, M.A.; Lee, Y.T.

1995-01-01

The HYLIFE-II fusion power plant conceptual design has evolved and improved continually over the past four years to its present form. This paper describes the FY93 reference case H1-B (nominally 1 GW(e) net output) and the enhanced case HE-B (nominally 2 GW(e) net output), which take advantage of improvements in the tritium management system to eliminate the intermediate loop and the intermediate heat exchangers (IHXs). The improvements in the heat-transport system and the steam power plant are described and the resulting cost reductions are evaluated. The new estimated cost of electricity (in 1990 dollars) is 5.1 cents kWh -1 for reference case H1-B and 3.6 cents kWh -1 for the enhanced case HE-B. (orig.)

Prototype of an electric 'integral-ecomotor' for the power range up to 1 kW; Funktionsmuster eines Integral-Sparmotors im Leistungsbereich kleiner 1 kW

Energy Technology Data Exchange (ETDEWEB)

Lindegger, M.

2006-11-15

Numerous electric motors of our daily use, with power ratings of about 1 kW operate at rather low efficiencies. Their share in the overall electric consumption is considerable. The aim of the research project consisted in the development of an efficient electric motor with incorporated electronic control ('integral-ecomotor'), which may serve as a substitute for usual variable speed squirrel cage three-phase motor. It was shown that the cost of these new motors of 1 kW power output, built with normalised casings, remain similar to those of squirrel cage three phase motors with inverters. Since 2004, the cost of raw materials as copper or aluminium increased considerably, whereas the cost of Neodymium-Iron-Boron magnets remained rather stable. These facts advocate for energy saving motors making use of permanent magnets, requiring much less copper or aluminium than squirrel cage three phase motors. With integral ecomotors, higher efficiencies are achieved at lower masses as compared to usual squirrel cage three-phase motors. In 2004, a first prototype of this ecomotor using permanent magnets, was built. The advantages of improved performances at lower weight were confirmed. During 2005 and 2006, the technology was then improved and matured in a joint research project with 3 industrial partners. (author)

Efficient IEC permanent-magnet motor (3 kW) - Final report; Effizienter IEC Permanent-Magnet-Motor (3 kW) - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Lindegger, M. [Circle Motor AG, Guemligen (Switzerland); Biner, H. P.; Evequoz, B. [Haute Ecole valaisanne, Sion (Switzerland); Salathe, D. [Hochschule Luzern, Technik und Architektur, Horw (Switzerland)

2008-04-15

Efficient permanent-magnet motors achieve in the area up to 100 kW a higher efficiency than induction machines (standard motors). A simple and fast energy saving option is the exchange of inefficient standard motors. The objective of this work is to install a 3 kW permanent-magnet motor in a standard IEC housing and the optimization of the design for high efficiency. Another objective is the development and the realization of an efficient variable speed control. The efficiency of the motor and the inverter with the control system must be demonstrated by tests. These tasks have been split between Circle Motor AG and the universities of applied sciences of Valais and Lucerne. Considering high-efficiency and low manufacturing cost, a brushless DC solution was adopted. This resulted in an optimum design of the motor and the control system realized with a three-phase rectifier, a buck converter with variable DC voltage, and a three-phase inverter feeding full positive and negative current to two of the legs simultaneously. The maximum measured efficiency is about 96.5% for the inverter and 92% for the motor. With the advantage of the variable speed operation, the efficiency of the realized 3 kW permanent magnet motor together with the control system is always higher than the efficiency of a measured class EFF1 induction motor, even with a direct connection to the grid. The permanent-magnet motor is also about 10 kg lighter. The cost calculation shows that the permanent-magnet motor can be competitive with the induction motor when speed control is desired. This is also the domain with the largest potential for energy savings from variable speed pumps, compressors, fans. (author)

Operating cost guidelines for benchmarking DOE thermal treatment systems for low-level mixed waste

International Nuclear Information System (INIS)

Salmon, R.; Loghry, S.L.; Hermes, W.H.

1994-11-01

This report presents guidelines for estimating operating costs for use in benchmarking US Department of Energy (DOE) low-level mixed waste thermal treatment systems. The guidelines are based on operating cost experience at the DOE Toxic Substances Control Act (TSCA) mixed waste incinerator at the K-25 Site at Oak Ridge. In presenting these guidelines, it should be made clear at the outset that it is not the intention of this report to present operating cost estimates for new technologies, but only guidelines for estimating such costs

Traditional growing rod versus magnetically controlled growing rod for treatment of early onset scoliosis: Cost analysis from implantation till skeletal maturity.

Science.gov (United States)

Wong, Carlos King Ho; Cheung, Jason Pui Yin; Cheung, Prudence Wing Hang; Lam, Cindy Lo Kuen; Cheung, Kenneth Man Chee

2017-01-01

To compare the yearly cost involved per patient in the use of magnetically controlled growing rod (MCGR) and traditional growing rods (TGRs) in the treatment of early onset scoliosis (EOS) and to assess the overall cost burden of MCGR with reference to patient and health-care infrastructure. For a hypothetical case of a 5-year-old girl with a diagnosis of EOS, a decision-tree model using TreeAge Software was developed to simulate annual health state transitions and compare the 8-year accumulative direct, indirect, and total cost among the four groups: (1) dual MCGRs with exchange every 2 years, (2) dual MCGRs with exchange every 3 years, (3) TGR with surgical distraction every year, and (4) TGR with surgical distraction every 6 months. Base-case values and ranges of clinical parameters reflecting complication rate after each type of surgical distraction were determined from a review of literature and expert opinion. Government gazette and expert opinion provided cost estimation of growing rods, surgeries, surgical complications, and routine follow-up. Microsimulation of 1000 individuals was conducted to test the variation in total direct costs (in 2016 Hong Kong dollars (HKD)) between individuals, and estimated the standard deviations of total direct costs for each group. Over the projected treatment period, indirect costs incurred by patients and family were higher for the MCGR as compared to the TGR. However, the total costs incurred by MCGR groups (group 1: HKD164k; group 2: HKD138k) were lower than those incurred by TGR groups (group 3: HKD191k; group 4: HKD290k). Although the accumulative costs of three groups (TGR with distraction every year and MCGR replacing every 2 and 3 years) were approaching each other in the first 2 years after initial implantation, at year 3 the accumulative cost of MCGR exchange every 2 years was HKD36k more than the yearly TGR surgery due to the cost of implant exchange. The cost incurred by both the MCGR groups was less than that

Commercially Available or Home-Grown: A Cost-Effectiveness Analysis of K-12 Online Courses

Science.gov (United States)

Proffitt, Susan

2014-01-01

Online learning in K-12 education is becoming a familiar option for students. By the end of 2011, all 50 states and the District of Columbia offered some form of online learning as an option for some students (Watson, Murin, Vashaw, Gemin, & Rapp, 2011). Online courses are appealing to students for a variety of reasons. The five most common…

Annual Energy Usage Reduction and Cost Savings of a School: End-Use Energy Analysis

Science.gov (United States)

Alghoul, M. A.; Bakhtyar, B.; Asim, Nilofar; Sopian, K.

2014-01-01

Buildings are among the largest consumers of energy. Part of the energy is wasted due to the habits of users and equipment conditions. A solution to this problem is efficient energy usage. To this end, an energy audit can be conducted to assess the energy efficiency. This study aims to analyze the energy usage of a primary school and identify the potential energy reductions and cost savings. A preliminary audit was conducted, and several energy conservation measures were proposed. The energy conservation measures, with reference to the MS1525:2007 standard, were modelled to identify the potential energy reduction and cost savings. It was found that the school's usage of electricity exceeded its need, incurring an excess expenditure of RM 2947.42. From the lighting system alone, it was found that there is a potential energy reduction of 5489.06 kWh, which gives a cost saving of RM 2282.52 via the improvement of lighting system design and its operating hours. Overall, it was found that there is a potential energy reduction and cost saving of 20.7% when the energy conservation measures are earnestly implemented. The previous energy intensity of the school was found to be 50.6 kWh/m2/year, but can theoretically be reduced to 40.19 kWh/mm2/year. PMID:25485294

Development and Implementation of a Low-Cost ex-situ Soil Clean-up Method for Actinide Removal at the AWE Aldermaston Site, U.K

International Nuclear Information System (INIS)

Agnew, K.; Purdie, P.; Agnew, K.; Cundy, A.B.; Hopkinson, L.; Croudace, I.W.; Warwick, P.E.F.

2009-01-01

This paper details the development (and implementation) of a novel, low-cost electrokinetic soil clean-up method for treatment of Pu-labelled soil wastes at the AWE Aldermaston site, Berkshire, U.K. Nuclear weapons manufacture and maintenance, and related research and development activities, have been carried out at the Aldermaston site for over 50 years, and these historical operations have generated a number of contaminated land legacy issues, including soils which contain above background (although radiologically insignificant) specific activities of Pu. Much of the Pu-labelled soil has been removed (via soil excavation), and is held in containment units on site, prior to remediation / decommissioning. Based on initial small-scale laboratory trials examining the potential for Pu removal and directed migration under a low intensity electrical field, a two year project (funded by the former UK Department of Trade and Industry and AWE PLC) has been implemented, and is reported here, involving a focussed programme of laboratory trials followed by a full-scale field trial to examine the potential of low-cost electrokinetic techniques to reduce the activity of Pu in clay-rich site soils, and reduce site waste disposal costs. Pu (and U) exhibited relatively complex behaviour in the laboratory trials, with Pu forming mobile soluble oxy-anionic species under the high pHs generated by the electrokinetic treatment technique. Clear mobilisation of Pu and U (along with a range of other elements) was however observed, in a range of soil types. The relative efficiency of remobilization was element-dependant, and, in terms of heavy metal contaminants, radionuclides, and the stable analogues of radionuclides known to be problematic at other nuclear sites, was (from most to least mobile) Cl > Zn > Sr > U > Pu > Pb. Both Pu and U showed enhanced mobility when the low-cost soil conditioning agent citric acid was added prior to electrokinetic treatment. Full-scale field trials of

A DegU-P and DegQ-Dependent Regulatory Pathway for the K-state in Bacillus subtilis

Directory of Open Access Journals (Sweden)

Mathieu Miras

2016-11-01

Full Text Available The K-state in the model bacterium Bacillus subtilis is associated with transformability (competence as well as with growth arrest and tolerance for antibiotics. Entry into the K-state is determined by the stochastic activation of the transcription factor ComK and occurs in about ~15% of the population in domesticated strains. Although the upstream mechanisms that regulate the K-state have been intensively studied and are well understood, it has remained unexplained why undomesticated isolates of B. subtilis are poorly transformable compared to their domesticated counterparts. We show here that this is because fewer cells enter the K-state, suggesting that a regulatory pathway limiting entry to the K-state is missing in domesticated strains. We find that loss of this limitation is largely due to an inactivating point mutation in the promoter of degQ. The resulting low level of DegQ decreases the concentration of phosphorylated DegU, which leads to the de-repression of the srfA operon and ultimately to the stabilization of ComK. As a result, more cells reach the threshold concentration of ComK needed to activate the auto-regulatory loop at the comK promoter. In addition, we demonstrate that the activation of srfA transcription in undomesticated strains is transient, turning off abruptly as cells enter the stationary phase. Thus, the K-state and transformability are more transient and less frequently expressed in the undomesticated strains. This limitation is more extreme than appreciated from studies of domesticated strains. Selection has apparently limited both the frequency and the duration of the bistably expressed K-state in wild strains, likely because of the high cost of growth arrest associated with the K-state. Future modeling of K-state regulation and of the fitness advantages and costs of the K-state must take these features into account.

Adventures with the K anti K system

International Nuclear Information System (INIS)

Cason, N.M.

1975-01-01

The status of the new generation of K anti K experiments is reviewed. The reactions discussed are of the type πN → K anti KN. The general characteristics of the K anti K system which make it interesting and unique, the results of the first generation of experiments, and finally the status of the current experiments and some plans for future analyses

Optimal dividend policies with transaction costs for a class of jump-diffusion processes

DEFF Research Database (Denmark)

Hunting, Martin; Paulsen, Jostein

2013-01-01

his paper addresses the problem of finding an optimal dividend policy for a class of jump-diffusion processes. The jump component is a compound Poisson process with negative jumps, and the drift and diffusion components are assumed to satisfy some regularity and growth restrictions. Each dividend...... payment is changed by a fixed and a proportional cost, meaning that if ξ is paid out by the company, the shareholders receive kξ−K, where k and K are positive. The aim is to maximize expected discounted dividends until ruin. It is proved that when the jumps belong to a certain class of light...

Review of the cost of venous thromboembolism

Science.gov (United States)

Fernandez, Maria M; Hogue, Susan; Preblick, Ronald; Kwong, Winghan Jacqueline

2015-01-01

Background Venous thromboembolism (VTE) is the second most common medical complication and a cause of excess length of hospital stay. Its incidence and economic burden are expected to increase as the population ages. We reviewed the recent literature to provide updated cost estimates on VTE management. Methods Literature search strategies were performed in PubMed, Embase, Cochrane Collaboration, Health Economic Evaluations Database, EconLit, and International Pharmaceutical Abstracts from 2003–2014. Additional studies were identified through searching bibliographies of related publications. Results Eighteen studies were identified and are summarized in this review; of these, 13 reported data from the USA, four from Europe, and one from Canada. Three main cost estimations were identified: cost per VTE hospitalization or per VTE readmission; cost for VTE management, usually reported annually or during a specific period; and annual all-cause costs in patients with VTE, which included the treatment of complications and comorbidities. Cost estimates per VTE hospitalization were generally similar across the US studies, with a trend toward an increase over time. Cost per pulmonary embolism hospitalization increased from $5,198–$6,928 in 2000 to $8,764 in 2010. Readmission for recurrent VTE was generally more costly than the initial index event admission. Annual health plan payments for services related to VTE also increased from $10,804–$16,644 during the 1998–2004 period to an estimated average of $15,123 for a VTE event from 2008 to 2011. Lower costs for VTE hospitalizations and annualized all-cause costs were estimated in European countries and Canada. Conclusion Costs for VTE treatment are considerable and increasing faster than general inflation for medical care services, with hospitalization costs being the primary cost driver. Readmissions for VTE are generally more costly than the initial VTE admission. Further studies evaluating the economic impact of new

Analysis of the differential cross sections for the reaction pp→ppK+K- in view of the K+K- interaction

International Nuclear Information System (INIS)

Silarski, M.

2008-07-01

Measurements of the pp→ppK + K - reaction, performed with the experiment COSY-11 at the Cooler Synchrotron COSY, show a significant difference between the obtained excitation function and theoretical expectations including pp-FSI. The discrepancy may be assigned to the influence of K + K - or K - p interaction. This interaction should manifest itself in the distributions of the differential cross section. This thesis presents an analysis of event distributions as a function of the invariant masses of two particle subsystems. In particular in the analysis two generalizations of the Dalitz plot proposed by Goldhaber and Nyborg are used. The present Investigations are based on the experimental data determined by the COSY-11 collaboration from two measurements at excess energies of Q=10 MeV and 28 MeV. The experimental distributions are compared to results of Monte Carlo simulations generated with various parameters of the K + K - and K - p interaction. The values of the K + K - scattering length, extracted from two data sets for Q=10 MeV and 28 MeV amount to: a K + K - =(11±8)+i(0±6) fm for Q=10 MeV, and a K + K - =(0.2±0.2)+i(0.0±0.5) fm for Q=28 MeV. Due to the low statistics, the extracted values have large uncertainties and are consistent with very low values of the real and imaginary part of the scattering length. (orig.)

The application of cost-benefit analysis to the radiological protection of the public

International Nuclear Information System (INIS)

1980-03-01

The subject of this document is the quantification of the potential harm caused to the general public by ionising radiation in normal operating circumstances. The object is to enable the health detriment from a practice involving exposure to ionising radiation to be directly compared with the costs of keeping the ensuing doses as low as reasonably achievable. Chapter headings include: development of radiological protection criteria; principles underlying the valuation of harm from radiation exposure; risk evaluation approach to costing of detriment; monetary valuations; distribution of costs and risk in time. Appendices cover the following: cost benefit analysis (principles); recommendations of ICRP on the use of cost benefit analysis; life valuation studies (review); application of cost benefit analysis to the value of the man sievert. (U.K.)

Underground cables as an alternative to overhead lines. A comparison of economic and technical aspects of voltages over 22 kV

Energy Technology Data Exchange (ETDEWEB)

Trohjell, J.E.; Vognild, I.H.

1994-07-11

The report presents technical and economical aspects of underground cables compared to overhead lines in Norway in high voltage transmission systems above 22 kV. The economical comparison between the two options includes capital costs of installation (investment costs), maintenance costs and costs of electrical losses. The main technical issues discussed are reliability and flexibility. 35 refs., 23 figs., 29 tabs.

Amplitude analysis of the K-K+ system produced in the reactions π-p → K-K+N and π+N → K-K+p at 6 GeV/c

International Nuclear Information System (INIS)

Cohen, D.; Ayres, D.S.; Diebold, R.; Kramer, S.L.; Pawlicki, A.J.; Wicklund, A.B.

1978-06-01

An amplitude analysis of the K - K + system produced in the reactions π - p → K - K + n and π + n → K - K + p was carried out using data from a high statistics experiment carried out with the Argonne Effective Mass Spectrometer. Combining the results from the two reactions allows the separation of the KantiK production amplitudes into their isospin-zero and one components. An enhancement is deserved in the S-wave amplitude near 1300 MeV which we call the S'. Using various physical arguments, including the t dependence of the amplitudes, six out of eight mathematically-allowed solutions can be eliminated for the magnitudes and phases of the amplitudes and shown that this new S-wave state has isospin zero. Requiring a reasonable behavior for the isospin-one P wave shows that the S' amplitude has a slow phase variation through the peak region

Dalitz plot analysis of the $D^+ \\rightarrow K^- K^+ K^+$ decay with the isobar model

CERN Document Server

The LHCb Collaboration

2016-01-01

This note presents a study of the $K^-K^+$ S-wave amplitude in doubly Cabibbo-suppressed ${D^+ \\rightarrow K^- K^+ K^+}$ decays performed using $2 \\text{fb}^{-1}$ of data collected by the LHCb detector in $pp$ collisions at $8~\\text{TeV}$ centre-of-mass energy. The Dalitz plot is studied under the assumption of the isobar model for resonance scattering. Models with combinations of resonant states are tested. Fits of comparable quality are obtained for different $K^-K^+$ S-wave parameterizations. The results obtained indicate that a variation of the S-wave phase at both ends of $K^-K^+$ spectrum is needed to describe the data. Further studies beyond the näive isobar model are foreseen to understand the $K^-K^+$ S-wave.

State and location dependence of action potential metabolic cost in cortical pyramidal neurons.

Science.gov (United States)

Hallermann, Stefan; de Kock, Christiaan P J; Stuart, Greg J; Kole, Maarten H P

2012-06-03

Action potential generation and conduction requires large quantities of energy to restore Na(+) and K(+) ion gradients. We investigated the subcellular location and voltage dependence of this metabolic cost in rat neocortical pyramidal neurons. Using Na(+)/K(+) charge overlap as a measure of action potential energy efficiency, we found that action potential initiation in the axon initial segment (AIS) and forward propagation into the axon were energetically inefficient, depending on the resting membrane potential. In contrast, action potential backpropagation into dendrites was efficient. Computer simulations predicted that, although the AIS and nodes of Ranvier had the highest metabolic cost per membrane area, action potential backpropagation into the dendrites and forward propagation into axon collaterals dominated energy consumption in cortical pyramidal neurons. Finally, we found that the high metabolic cost of action potential initiation and propagation down the axon is a trade-off between energy minimization and maximization of the conduction reliability of high-frequency action potentials.

Additional functions of remotely read kWh-meters

Energy Technology Data Exchange (ETDEWEB)

Koponen, P. [VTT Energy, Espoo (Finland); Vehvilaeinen, S. [Mittrix Oy (Finland); Rantanen, J. [Helsinki Energy Board, Helsinki (Finland)

1996-12-31

In this presentation the possibilities to include new applications into remotely read smart kWh-meters are considered. New electronic meters can measure various electric quantities and have some extra calculating capacity. So they can be used to provide functions that distribution automation and the customer need and thus share the costs. Some applications like monitoring the state of the distribution network or locating faults are only for the utility, but many applications also need an interface to the customer or his automation system. Among those are monitoring the quality of electricity, estimating load curves, applying dynamic tariffs and selling electricity and accounting. As a special item, the continuous monitoring of the quality of electricity is discussed. This includes voltage levels, total distortion, asymmetry and so on. If such a kWh-meter indicates quality problems the situation can be detected with a suitable portable quality meter. The poor quality can be detected before it causes harm to equipment owned by the customers or the power distribution company. This presentation also presents a prototype of such a quality monitoring kWh-meter

Sampling and Analysis Plan for K Basins Debris

International Nuclear Information System (INIS)

WESTCOTT, J.L.

2000-01-01

This Sampling and Analysis Plan presents the rationale and strategy for sampling and analysis activities to support removal of debris from the K-East and K-West Basins located in the 100K Area at the Hanford Site. This project is focused on characterization to support waste designation for disposal of waste at the Environmental Restoration Disposal Facility (ERDF). This material has previously been dispositioned at the Hanford Low-Level Burial Grounds or Central Waste Complex. The structures that house the basins are classified as radioactive material areas. Therefore, all materials removed from the buildings are presumed to be radioactively contaminated. Because most of the materials that will be addressed under this plan will be removed from the basins, and because of the cost associated with screening materials for release, it is anticipated that all debris will be managed as low-level waste. Materials will be surveyed, however, to estimate radionuclide content for disposal and to determine that the debris is not contaminated with levels of transuranic radionuclides that would designate the debris as transuranic waste

Additional functions of remotely read kWh-meters

Energy Technology Data Exchange (ETDEWEB)

Koponen, P [VTT Energy, Espoo (Finland); Vehvilaeinen, S [Mittrix Oy (Finland); Rantanen, J [Helsinki Energy Board, Helsinki (Finland)

1997-12-31

In this presentation the possibilities to include new applications into remotely read smart kWh-meters are considered. New electronic meters can measure various electric quantities and have some extra calculating capacity. So they can be used to provide functions that distribution automation and the customer need and thus share the costs. Some applications like monitoring the state of the distribution network or locating faults are only for the utility, but many applications also need an interface to the customer or his automation system. Among those are monitoring the quality of electricity, estimating load curves, applying dynamic tariffs and selling electricity and accounting. As a special item, the continuous monitoring of the quality of electricity is discussed. This includes voltage levels, total distortion, asymmetry and so on. If such a kWh-meter indicates quality problems the situation can be detected with a suitable portable quality meter. The poor quality can be detected before it causes harm to equipment owned by the customers or the power distribution company. This presentation also presents a prototype of such a quality monitoring kWh-meter

COMPARISON OF TWO TOTAL RNA EXTRACTION PROTOCOLS FROM CHO-K1 CELLS FOR RT-PCR: CUT-OFF COST FOR RESEARCHERS

Directory of Open Access Journals (Sweden)

Vasila Packeer Mohamed

2014-05-01

Full Text Available ABSTRACT: Various methods have been described to extract RNA from adherent mammalian cells. RNA isolation in conjunction with reverse transcription polymerase chain reaction (RT-PCR is a valuable tool used to study gene expression profiling. This approach is now being used in mammalian cell bioprocessing to help understand and improve the system. The objective of this study was to compare and determine the most suitable RNA extraction method for CHO-K1 cells in a setting where a relatively large amount of samples was involved. Total RNA was extracted using Total RNA purification kit (without DNase treatment; Norgen, Canada and RNeasy mini kit (with DNase treatment; Qiagen, USA respectively. The extracted RNA was then reverse transcribed, and the cDNA was subjected to PCR-amplifying 18S. Yield from RNeasy kit was significantly higher (0.316 ± 0.033 µg/µl; p=0.004 than Total RNA purification kit (0.177 ± 0.0243 µg/µl. However, RNA purity for both methods was close to 2.0 and there was no significant difference between the methods. Total RNA purification kit is less expensive than RNeasy kit. Since there is no DNase treatment step in the former, extraction time for RNA is shorter. When the extracted RNA was subjected to RT-PCR, both methods were able to show detection of 18S at 219 bp.   Therefore, this study demonstrates that both protocols are suitable for RNA extraction for CHO-K1 cells. RNeasy mini kit (Qiagen is recommended if higher yields is the primary concern and Total RNA Purification kit (Norgen is recommended if time and cost are concerned. ABSTRAK: Pelbagai kaedah telah digunakan untuk mengekstrak RNA daripada sel mamalia lekat.  Pemencilan RNA dengan menggunakan reaksi rantai polimerase transkripsi berbalik (RT-PCR merupakan kaedah penting yang digunakan dalam mengkaji pernyataan gen berprofil.  Pendekatan ini kini digunakan dalam pemprosesan bio sel mamalia untuk memahami dan menambah baik sistem.  Tujuan kajian dijalankan

Nuclear generation cost and nuclear research development fund

International Nuclear Information System (INIS)

Kim, S. S.; Song, G. D.

2000-01-01

The main objective of this study is to analyze the effects of nuclear R and D fund to nuclear generation cost and to assess the adaptability of fund size through the comparison with the nuclear research fund in Japan. It was estimated that nuclear R and D fund increased the average annual unit cost of nuclear power generation by 1.14 won/kWh. When the size of nuclear R and D fund is compared with that in Japan, this study suggests that the current nuclear R and D fund should be largely increased taking into consideration the ratio of R and D fund to nuclear generation

Applying cost-sensitive classification for financial fraud detection under high class-imbalance

CSIR Research Space (South Africa)

Moepya, SO

2014-12-01

Full Text Available , sensitivity, specificity, recall and precision using PCA and Factor Analysis. Weighted Support Vector Machines (SVM) were shown superior to the cost-sensitive Naive Bayes (NB) and K-Nearest Neighbors classifiers....

Photoproduction of the K= K0-(1750)

International Nuclear Information System (INIS)

Mitchell, Ryan Edward

2003-01-01

While photoproduction has often been advertised as an important environment in which to study light meson spectroscopy, solid experimental results are sparse. In fact, beyond the relatively straightforward photoproduction of the ρ, ω, and ψ mesons, the few results of exclusive photoproduction that do exist are poorly understood, and several, perhaps, have even been misinterpreted. After extensively reviewing the sometimes tenuous history of the exclusive photoproduction of the ''p'(1600),'' the ''ωπ 0 (1250),'' the ''ω(1650),'' and the ''K + K - (1750),'' new results from the E831/FOCUS photoproduction experiment at Fermilab are presented which address the interpretation of the K + K - (1750). This enhancement in low-p T K + K - pairs at a mass near 1750 MeV/c 2 has been observed by several previous photoproduction experiments, but, despite several apparent inconsistencies, it has always been interpreted as the J PC = 1 -- ψ(1680) meson. With nearly two orders of magnitude more events than any previous observation of the K + K - (1750), and based on precise measurements of its mass and width, and its absence from the K*K final state, the FOCUS data can finally render this interpretation implausible. In addition, several steps have been taken towards establishing a new interpretation. Based on limited angular analyses of its decay and the beam energy dependence of its production, they argue that, in the absence of any wild interference scenarios, the K + K - (1750) has J PC ≠ 1 -- , and, in fact, the most likely assignment appears to be 2 ++ . It is hoped that this work can help set the stage for future reevaluations and new insights in photoproduction

Large-scale offshore wind energy. Cost analysis and integration in the Dutch electricity market

International Nuclear Information System (INIS)

De Noord, M.

1999-02-01

The results of analysis of the construction and integration costs of large-scale offshore wind energy (OWE) farms in 2010 are presented. The integration of these farms (1 and 5 GW) in the Dutch electricity distribution system have been regarded against the background of a liberalised electricity market. A first step is taken for the determination of costs involved in solving integration problems. Three different types of foundations are examined: the mono-pile, the jacket and a new type of foundation: the concrete caisson pile: all single-turbine-single-support structures. For real offshore applications (>10 km offshore, at sea-depths >20 m), the concrete caisson pile is regarded as the most suitable. The price/power ratios of wind turbines are analysed. It is assumed that in 2010 turbines in the power range of 3-5 MW are available. The main calculations have been conducted for a 3 MW turbine. The main choice in electrical infrastructure is for AC or DC. Calculations show that at distances of 30 km offshore and more, the use of HVDC will result in higher initial costs but lower operating costs. The share of operating and maintenance (O ampersand M) costs in the kWh cost price is approximately 3.3%. To be able to compare the two farms, a base case is derived with a construction time of 10 years for both. The energy yield is calculated for a wind regime offshore of 9.0 m/s annual mean wind speed. Per 3 MW turbine this results in an annual energy production of approximately 12 GWh. The total farm efficiency amounts to 82%, resulting in a total farm capacity factor of 38%. With a required internal rate of return of 15%, the kWh cost price amounts to 0.24 DFl and 0.21 DFl for the 1 GW and 5 GW farms respectively in the base case. The required internal rate of return has a large effect on the kWh cost price, followed by costs of subsystems. O ampersand M costs have little effect on the cost price. Parameter studies show that a small cost reduction of 5% is possible when

Signed star (k,k-domatic number of a graph

Directory of Open Access Journals (Sweden)

S. M. Sheikholeslami

2014-01-01

Full Text Available Let \\(G\\ be a simple graph without isolated vertices with vertex set \\(V(G\\ and edge set \\(E(G\\ and let \\(k\\ be a positive integer. A function \\(f:E(G\\longrightarrow \\{-1, 1\\}\\ is said to be a signed star \\(k\\-dominating function on \\(G\\ if \\(\\sum_{e\\in E(v}f(e\\ge k\\ for every vertex \\(v\\ of \\(G\\, where \\(E(v=\\{uv\\in E(G\\mid u\\in N(v\\}\\. A set \\(\\{f_1,f_2,\\ldots,f_d\\}\\ of signed star \\(k\\-dominating functions on \\(G\\ with the property that \\(\\sum_{i=1}^df_i(e\\le k\\ for each \\(e\\in E(G\\, is called a signed star \\((k,k\\-dominating family (of functions on \\(G\\. The maximum number of functions in a signed star \\((k,k\\-dominating family on \\(G\\ is the signed star \\((k,k\\-domatic number of \\(G\\, denoted by \\(d^{(k,k}_{SS}(G\\. In this paper we study properties of the signed star \\((k,k\\-domatic number \\(d_{SS}^{(k,k}(G\\. In particular, we present bounds on \\(d_{SS}^{(k,k}(G\\, and we determine the signed \\((k,k\\-domatic number of some regular graphs. Some of our results extend these given by Atapour, Sheikholeslami, Ghameslou and Volkmann [Signed star domatic number of a graph, Discrete Appl. Math. 158 (2010, 213-218] for the signed star domatic number.

Results from the OECD report on international projections of electricity generating costs

International Nuclear Information System (INIS)

Paffenbarger, J.A.; Bertel, E.

1998-01-01

The International Energy Agency and Nuclear Energy Agency of the OECD have periodically undertaken a joint study on electricity generating costs in OECD Member countries and selected non-Member countries. This paper presents key results from the 1998 update of this study. Experts from 19 countries drawn from electric utility companies and government provided data on capital costs, operating and maintenance costs, and fuel costs from which levelized electricity generating costs (US cents/kWh) for baseload power plants were estimated in each country using a common set of economic assumptions. Light water nuclear power plants, pulverized coal plants, and natural gas-fired combined cycle gas turbines were the principal options evaluated. five and 10% discount rates, 40-year operating lifetime, and 75% annual load factor were the base assumptions, with sensitivity analyses on operating lifetime and load factor. Fuel costs and fuel escalation were provided individually by country, with a sensitivity case to evaluate costs assuming no real fuel price escalation over plant lifetimes. Of the three principal fuel/technology options, none is predominantly the cheapest option for all economic assumptions. However, fossil-fueled options are generally estimated to be the least expensive option. The study confirms that gas-fired combined cycles have improved their economic performance in most countries in recent years and are strong competitors to nuclear and coal-fired plants. Eleven out of the 18 countries with two or more options show gas-fired plants to be the cheapest option at 10% discount rate. Coal remains a strong competitor to gas when lower discount rates are used. Nuclear is the least expensive at both 5 and 10% discount rate in only two countries. Generally, with gas prices above 5 US$/GJ, nuclear plants constructed at overnight capital costs below 1 650 $/kWe have the potential to be competitive only at lower discount rates

Thermoelectric Properties of High-Doped Silicon from Room Temperature to 900 K

Science.gov (United States)

Stranz, A.; Kähler, J.; Waag, A.; Peiner, E.

2013-07-01

Silicon is investigated as a low-cost, Earth-abundant thermoelectric material for high-temperature applications up to 900 K. For the calculation of module design the Seebeck coefficient and the electrical as well as thermal properties of silicon in the high-temperature range are of great importance. In this study, we evaluate the thermoelectric properties of low-, medium-, and high-doped silicon from room temperature to 900 K. In so doing, the Seebeck coefficient, the electrical and thermal conductivities, as well as the resulting figure of merit ZT of silicon are determined.

The preventive effect on respiratory tract infections of Oscillococcinum®. A cost-effectiveness analysis

Directory of Open Access Journals (Sweden)

Colombo GL

2018-01-01

Full Text Available Giorgio L Colombo,1,2 Sergio Di Matteo,2 Chiara Martinotti,2 Martina Oselin,2 Giacomo M Bruno,2 Gianfranco M Beghi3 1Department of Drug Sciences, University of Pavia, Pavia, Italy; 2S.A.V.E. Studi Analisi Valutazioni Economiche S.r.l., Health Economics & Outcomes Research, Milan, Italy; 3Unit of Pulmonary Rehabilitation, Hospital of Casorate Primo, Pavia, Italy Background: Anas barbariae hepatis et cordis extractum 200K (Oscillococcinum® is used to treat and prevent seasonal colds and airway inflammatory affections, improve symptom control, and reduce the frequency of respiratory tract infection (RTI episodes. The objective of this controlled observational study is to investigate, from the Italian National Health Service (NHS point of view, the role of Anas barbariae hepatis et cordis extractum 200K in preventing RTIs and estimate the annual average cost per patient due to visits and medicines in a real-world setting, investigating whether this method of treatment can bring savings for the NHS.Methods: Data from a single center from 2002 to 2011 were used. The analysis examined 455 patients who suffered from respiratory diseases. Of the total number of patients, 246 were treated with Anas barbariae hepatis et cordis extractum 200K while 209 were not treated (Control group. All the data concerning RTI episodes, pharmacological treatments, and pneumological visits were extracted from the database.Results: It was found that, regardless of the diagnosis, the frequency of RTI episodes was always lower in patients treated with Anas barbariae hepatis et cordis extractum 200K; the difference between the numbers of events occurring was statistically significant in every class of patients (p<0.001. The costs that the NHS had to incur were significantly lower in the classes of patients treated (p<0.001.Discussion: The results indicate that Anas barbariae hepatis et cordis extractum 200K has a preventive effect on the onset of RTI episodes. The analysis

38th Annual Maintenance & Operations Cost Study for Schools

Science.gov (United States)

Agron, Joe

2009-01-01

Despite the worst economic environment in generations, spending by K-12 institutions on maintenance and operations (M&O) held its own--defying historical trends that have shown M&O spending among the most affected in times of budget tightening. This article presents data from the 38th annual Maintenance & Operations Cost Study for…

A techno-economic analysis of cost savings for retrofitting industrial aerial coolers with variable frequency drives

International Nuclear Information System (INIS)

Miller, Patrick; Olateju, Babatunde; Kumar, Amit

2012-01-01

Highlights: ► Techno-economic models were developed to assess the retrofitting of aerial coolers. ► The IRR for retrofitting with VFDs exceeds 10% for motor sizes above 20 hp. ► The IRR reaches a maximum of 220% for a cooler with fifty, 250 hp motors. ► The simple payback becomes less than 1 year for motors larger than 120 hp. ► Ambient temperature and location affects the profitability of VFD investment. - Abstract: A techno-economic model was created in order to develop curves that show the typical annual energy savings, rate of return, and payback for retrofitting aerial coolers with variable frequency drives (VFDs) for up to 50 motors, motor sizes from 4 to 186 kW (5–250 hp), and varying climate conditions. The cost savings due to installing a VFD depends on the reduction in energy used, as well as the reduction in power demand, the capital cost of the VFD, installation cost of the VFD, change in operating cost, and cost of electricity. The geographic locations examined in this report were Fort McMurray, Calgary, Vancouver, and Thunder Bay. This study found that the IRR increases rapidly with motor size, becomes greater than 10% at a motor size of approximately 15 kW, and may be as high as 220% (for the case of fifty, 186 kW motors). The IRR is sensitive to the number of fan motors retrofitted with VFDs, however the sensitivity rapidly declines as the number of motors is increased beyond five. The simple payback period becomes less than 1 year and nearly independent of number of motors and motor size for motors larger than 90 kW. Ambient temperature and geographic location affect the profitability of the investment, although the IRR only changes by approximately 4%.

Field demonstration of a portable, X-ray, K-edge heavy-metal detector

International Nuclear Information System (INIS)

Jensen, T.; Aljundi, T.; Whitmore, C.; Zhong, H.; Gray, J.N.

1997-01-01

Under the Characterization, Monitoring, and Sensor Technology Crosscutting Program, the authors have designed and built a K-edge heavy metal detector that measures the level of heavy metal contamination inside closed containers in a nondestructive, non-invasive way. The device employs a volumetric technique that takes advantage of the X-ray absorption characteristics of heavy elements, and is most suitable for characterization of contamination inside pipes, processing equipment, closed containers, and soil samples. The K-edge detector is a fast, efficient, and cost-effective in situ characterization tool. More importantly, this device will enhance personnel safety while characterizing radioactive and toxic waste. The prototype K-edge system was operated at the Materials and Chemistry Laboratory User Facility at the Oak Ridge K-25 Site during February 1997. Uranium contaminated pipes and valves from a UF 6 feed facility were inspected using the K-edge technique as well as a baseline nondestructive assay method. Operation of the K-edge detector was demonstrated for uranium contamination ranging from 10 to 6,000 mg/cm 2 and results from the K-edge measurements were found to agree very well with nondestructive assay measurements

Ultralow-k nanoporous organosilicate dielectric films imprinted with dendritic spheres.

Science.gov (United States)

Lee, Byeongdu; Park, Young-Hee; Hwang, Yong-Taek; Oh, Weontae; Yoon, Jinhwan; Ree, Moonhor

2005-02-01

Integrated circuits that have improved functionality and speed in a smaller package and that consume less power are desired by the microelectronics industry as well as by end users, to increase device performance and reduce costs. The fabrication of high-performance integrated circuits requires the availability of materials with low or ultralow dielectric constant (low-k: k noise in interconnect conductors, but also minimize power dissipation by reducing the capacitance between the interconnects. Here we describe the preparation of low- and ultralow-k nanoporous organosilicate dielectrics from blends of polymethylsilsesquioxane (PMSSQ) precursor with globular ethyl acrylate-terminated polypropylenimine dendrimers, which act as porogens. These dendrimers are found to mix well with the PMSSQ precursor and after their sacrificial thermal decompositions result in closed, spherical pores of <2.0 nm radius with a very narrow distribution even at high loading. This pore size and distribution are the smallest and the narrowest respectively ever achieved in porous spin-on dielectrics. The method therefore successfully delivers low- and ultralow-k PMSSQ dielectric films that should prove very useful in advanced integrated circuits.

Design and fabrication of a low-cost Darrieus vertical-axis wind-turbine system, phase 2. Volume 3: Design, fabrication, and site drawing

Science.gov (United States)

1983-03-01

The design, fabrication, and site drawings associated with fabrication, installation, and check out of 100 kW 17 meter Vertical Axis Wind Turbines (VAWTs) were reported. The turbines are Darrieus type VAWTs with rotors 17 meters in diameter and 25.15 meters in height. They can produce 100 kW of electric power at a cost of energy as low as 3 cents per kWh, in an 18 mph wind regime using 12% annualized costs. Four turbines are produced, three are installed and operable.

Cost-driven materials selection criteria for redox flow battery electrolytes

Science.gov (United States)

Dmello, Rylan; Milshtein, Jarrod D.; Brushett, Fikile R.; Smith, Kyle C.

2016-10-01

Redox flow batteries show promise for grid-scale energy storage applications but are presently too expensive for widespread adoption. Electrolyte material costs constitute a sizeable fraction of the redox flow battery price. As such, this work develops a techno-economic model for redox flow batteries that accounts for redox-active material, salt, and solvent contributions to the electrolyte cost. Benchmark values for electrolyte constituent costs guide identification of design constraints. Nonaqueous battery design is sensitive to all electrolyte component costs, cell voltage, and area-specific resistance. Design challenges for nonaqueous batteries include minimizing salt content and dropping redox-active species concentration requirements. Aqueous battery design is sensitive to only redox-active material cost and cell voltage, due to low area-specific resistance and supporting electrolyte costs. Increasing cell voltage and decreasing redox-active material cost present major materials selection challenges for aqueous batteries. This work minimizes cost-constraining variables by mapping the battery design space with the techno-economic model, through which we highlight pathways towards low price and moderate concentration. Furthermore, the techno-economic model calculates quantitative iterations of battery designs to achieve the Department of Energy battery price target of 100 per kWh and highlights cost cutting strategies to drive battery prices down further.

Techno-Economic Feasibility of Highly Efficient Cost-Effective Thermoelectric-SOFC Hybrid Power Generation Systems

Energy Technology Data Exchange (ETDEWEB)

Jifeng Zhang; Jean Yamanis

2007-09-30

Solid oxide fuel cell (SOFC) systems have the potential to generate exhaust gas streams of high temperature, ranging from 400 to 800 C. These high temperature gas streams can be used for additional power generation with bottoming cycle technologies to achieve higher system power efficiency. One of the potential candidate bottoming cycles is power generation by means of thermoelectric (TE) devices, which have the inherent advantages of low noise, low maintenance and long life. This study was to analyze the feasibility of combining coal gas based SOFC and TE through system performance and cost techno-economic modeling in the context of multi-MW power plants, with 200 kW SOFC-TE module as building blocks. System and component concepts were generated for combining SOFC and TE covering electro-thermo-chemical system integration, power conditioning system (PCS) and component designs. SOFC cost and performance models previously developed at United Technologies Research Center were modified and used in overall system analysis. The TE model was validated and provided by BSST. The optimum system in terms of energy conversion efficiency was found to be a pressurized SOFC-TE, with system efficiency of 65.3% and cost of $390/kW of manufacturing cost. The pressurization ratio was approximately 4 and the assumed ZT of the TE was 2.5. System and component specifications were generated based on the modeling study. The major technology and cost barriers for maturing the system include pressurized SOFC stack using coal gas, the high temperature recycle blowers, and system control design. Finally, a 4-step development roadmap is proposed for future technology development, the first step being a 1 kW proof-of-concept demonstration unit.

Bulk Electric Load Cost Calculation Methods: Iraqi Network Comparative Study

Directory of Open Access Journals (Sweden)

Qais M. Alias

2016-09-01

Full Text Available It is vital in any industry to regain the spent capitals plus running costs and a margin of profits for the industry to flourish. The electricity industry is an everyday life touching industry which follows the same finance-economic strategy. Cost allocation is a major issue in all sectors of the electric industry, viz, generation, transmission and distribution. Generation and distribution service costing’s well documented in the literature, while the transmission share is still of need for research. In this work, the cost of supplying a bulk electric load connected to the EHV system is calculated. A sample basic lump-average method is used to provide a rough costing guide. Also, two transmission pricing methods are employed, namely, the postage-stamp and the load-flow based MW-distance methods to calculate transmission share in the total cost of each individual bulk load. The three costing methods results are then analyzed and compared for the 400kV Iraqi power grid considered for a case study.

Portable and wireless IV-curve tracer for >5 kV organic photovoltaic modules

DEFF Research Database (Denmark)

Garcia Valverde, Rafael; Chaouki-Almagro, Samir; Corazza, Michael

2016-01-01

voltage applications, the design is based on low cost components, battery-based isolated supply and wireless communication. A prototype has been implemented and field tested for characterization of different organic photovoltaic modules (OPV) made according to the infinity concept with a large number......The practical design of a wirelessly controlled portable IV-curve tracer based on a capacitive load is described. The design is optimized for the measurement of solar cell modules presenting a high open circuit voltage of up to 6 kV and a low short circuit current below 100 mA. The portable IV......-tracer allows for on-site/in-situ characterization of large modules under real operating conditions and enables fast detection of potential failure of anomalies in electrical behavior. Currently available electronic loads only handle voltages up to around 1 kV. To overcome cost and safety issues related to high...

Norwich Technologies' Advanced Low-Cost Receivers for Parabolic Troughs

Energy Technology Data Exchange (ETDEWEB)

Stettenheim, Joel [Norwich Technologies, White River Junction, VT (United States); McBride, Troy O. [Norwich Technologies, White River Junction, VT (United States); Brambles, Oliver J. [Norwich Technologies, White River Junction, VT (United States); Cashin, Emil A. [Norwich Technologies, White River Junction, VT (United States)

2013-12-31

This report summarizes the successful results of our SunShot project, Advanced Low-Cost Receivers for Parabolic Troughs. With a limited budget of $252K and in only 12 months, we have (1) developed validated optical and thermal models and completed rigorous optimization analysis to identify key performance characteristics as part of developing first-generation laboratory prototype designs, (2) built optical and thermal laboratory prototypes and test systems with associated innovative testing protocols, and (3) performed extensive statistically relevant testing. We have produced fully functioning optical and thermal prototypes and accurate, validated models shown to capture important underlying physical mechanisms. The test results from the first-generation prototype establish performance exceeding the FOA requirement of thermal efficiency >90% for a CSP receiver while delivering an exit fluid temperature of > 650 °C and a cost < $150/kWth. Our vacuum-free SunTrap receiver design provides improvements over conventional vacuum-tube collectors, allowing dramatic reductions in thermal losses at high operating temperature.

A Total Cost of Ownership Model for Low Temperature PEM Fuel Cells in Combined Heat and Power and Backup Power Applications

Energy Technology Data Exchange (ETDEWEB)

University of California, Berkeley; Wei, Max; Lipman, Timothy; Mayyas, Ahmad; Chien, Joshua; Chan, Shuk Han; Gosselin, David; Breunig, Hanna; Stadler, Michael; McKone, Thomas; Beattie, Paul; Chong, Patricia; Colella, Whitney; James, Brian

2014-06-23

A total cost of ownership model is described for low temperature proton exchange membrane stationary fuel cell systems for combined heat and power (CHP) applications from 1-250kW and backup power applications from 1-50kW. System designs and functional specifications for these two applications were developed across the range of system power levels. Bottom-up cost estimates were made for balance of plant costs, and detailed direct cost estimates for key fuel cell stack components were derived using design-for-manufacturing-and-assembly techniques. The development of high throughput, automated processes achieving high yield are projected to reduce the cost for fuel cell stacks to the $300/kW level at an annual production volume of 100 MW. Several promising combinations of building types and geographical location in the U.S. were identified for installation of fuel cell CHP systems based on the LBNL modelling tool DER CAM. Life-cycle modelling and externality assessment were done for hotels and hospitals. Reduced electricity demand charges, heating credits and carbon credits can reduce the effective cost of electricity ($/kWhe) by 26-44percent in locations such as Minneapolis, where high carbon intensity electricity from the grid is displaces by a fuel cell system operating on reformate fuel. This project extends the scope of existing cost studies to include externalities and ancillary financial benefits and thus provides a more comprehensive picture of fuel cell system benefits, consistent with a policy and incentive environment that increasingly values these ancillary benefits. The project provides a critical, new modelling capacity and should aid a broad range of policy makers in assessing the integrated costs and benefits of fuel cell systems versus other distributed generation technologies.

Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications. 2009 Update

Energy Technology Data Exchange (ETDEWEB)

James, Brian D. [Directed Technologies, Arlington, VA (United States); Kalinoski, Jeffrey A. [Directed Technologies, Arlington, VA (United States); Baum, Kevin N. [Directed Technologies, Arlington, VA (United States)

2010-01-01

This report is the third annual update of a comprehensive automotive fuel cell cost analysis. It contains estimates for material and manufacturing cost of complete 80 kWnet direct hydrogen proton exchange membrane fuel cell systems suitable for powering light duty automobiles.

Review of the cost of venous thromboembolism

Directory of Open Access Journals (Sweden)

Fernandez MM

2015-08-01

considerable and increasing faster than general inflation for medical care services, with hospitalization costs being the primary cost driver. Readmissions for VTE are generally more costly than the initial VTE admission. Further studies evaluating the economic impact of new treatment options such as the non-vitamin K antagonist oral anticoagulants on VTE treatment are warranted. Keywords: deep vein thrombosis, pulmonary embolism, costs, pharmacoeconomics, resource utilization

Orbit Clustering Based on Transfer Cost

Science.gov (United States)

Gustafson, Eric D.; Arrieta-Camacho, Juan J.; Petropoulos, Anastassios E.

2013-01-01

We propose using cluster analysis to perform quick screening for combinatorial global optimization problems. The key missing component currently preventing cluster analysis from use in this context is the lack of a useable metric function that defines the cost to transfer between two orbits. We study several proposed metrics and clustering algorithms, including k-means and the expectation maximization algorithm. We also show that proven heuristic methods such as the Q-law can be modified to work with cluster analysis.

The cost of solar refrigeration: The rococo project; Was solare Kuehlung kostet - das Rococo-Projekt

Energy Technology Data Exchange (ETDEWEB)

Meyer, J.P.

2008-01-21

The cost of modern solar refrigerators is between 1,300 and 8,000 Euros per kW of refrigeration capacity. The biggest potential for savings is in the peripheral components, as well as in the operating cost and especially in servicing. Cost reduction must have priority if solar refrigeration is to be successful in the market. In the context of the European research project ''Reduction of costs of Solar Cooling systems'' (Rococo), a team of scientists from France, Spain and Austria investigated existing systems. (orig.)

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) : Part 2: cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

CERN Document Server

International Electrotechnical Commission. Geneva

2005-01-01

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) : Part 2: cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

Description of the ππ → ππ, ππ → K anti K and K anti K → K anti K process in the framework of the N/D method

International Nuclear Information System (INIS)

Khenner, V.K.

1978-01-01

On the basis of the dispersion model the ππ → ππ, ππ → K anti K and K anti K → K anti K processes in the state with I=J=.0 are studied. The processes are considered using the N/D matrix method, permitting to solve precisely the related system of dispersion ratios for the partial amplitudes. It is shown that the discovery of the inelastic channel can be effectively taken into account by the introduction of the CDD (Castillejo-Dality-Dyson) term into the elastic scattering amplitude. It is established, that at a given ππ → ππ amplitude the transition from the complete multichannel problem, considered by the matrix method, to the linear problem leads to the solution, where all arbitrary constants are fixed in the case when zeros of the ππ → K anti K and ππ → ππ amplitudes coincide. In this case the ππ → K anti K amplitude coincides with that obtained by the Omnes-Muskhelishvili method. Other processes, where the interaction in the initial or final state is insignificant, can be also studied by such a method not resulting in the appearance of additional arbitrary parameters. The consideration of the problem of a resonance position in various channels has shown, that the matrix method does not obligatorily result in the appearance of the resonance with the permitted quantum numbers in all the interconnected channels

New transmission interconnection reduces consumer costs

Energy Technology Data Exchange (ETDEWEB)

Anon.

2008-09-15

The Central American electric interconnection system (SIEPAC) project will involve the construction of a 1830 km 230 kV transmission system that will link Guatemala, El Salvador, Honduras, Costa Rica, Nicaragua, and Panama. The system is expected to alleviate the region's power shortages and reduce electricity costs for consumers. Costs for the SIEPAC project have been estimated at $370 million. The system will serve approximately 37 million customers, and will include 15 substations. The contract for building the electrical equipment has been awarded to Schweitzer Engineering Laboratories (SEL) who plan to manufacture components at a plant in Mexico. The equipment will include high speed line protection, automation, and control systems. Line current differential systems and satellite-synchronized clocks will also be used. The new transmission system is expected to be fully operational by 2009. 1 fig.

Integration of risk aversion in the evaluation of the external cost of a nuclear accident

International Nuclear Information System (INIS)

Eeckhoudt, L.; Schieber, C.; Schneider, Th.

1998-01-01

Full text of publication follows: the external costs of fuel cycles used in the production of electricity are those imposed on society and environment that are not accounted for by the producers and consumers of energy. Within the evaluation of the external cost of the nuclear fuel cycle, the evaluation of a nuclear accident has to be addressed. For this purpose, the basic approach consists in calculating the expected value of various occident scenarios. the main criticism of this approach is that there is a discrepancy between the social acceptability of the risk and the average monetary value which corresponds in principle to the compensation of the consequences for each individual of the population affected by the accident. The aim of this paper is to propose a methodology for the integration of risk aversion, relying on the expected utility approach, as well as a numerical application based on the French data for the external cost of a nuclear accident. Although a huge range of values has been published for the relative risk aversion coefficient, it seems reasonable to adopt a value of 2 for the specific case of nuclear accident. This leads to an estimated multiplying coefficient approximately equal to 20 to be applied to the expected external cost of a nuclear accident corresponding to a release of about 1% of the core. In this case, the external cost of the nuclear accident is estimated to 0.046 mECU/kWh (i.e. about 50% of the total external costs of the nuclear fuel cycle estimated at 0.1 mECU/kWh with a 3% discount rate), instead of 0.0023 mECU/kWh without taking into account risk aversion. (authors)

Nutrient and Organic Carbon Losses, Enrichment Rate, and Cost of Water Erosion

Directory of Open Access Journals (Sweden)

Ildegardis Bertol

Full Text Available ABSTRACT Soil erosion from water causes loss of nutrients and organic carbon, enriches the environment outside the erosion site, and results in costs. The no-tillage system generates increased nutrient and C content in the topsoil and, although it controls erosion, it can produce a more enriched runoff than in the conventional tillage system. This study was conducted in a Humic Cambisol in natural rainfall from 1997 to 2012 to quantify the contents and total losses of nutrients and organic C in soil runoff, and to calculate the enrichment rates and the cost of these losses. The treatments evaluated were: a soil with a crop, consisting of conventional tillage with one plowing + two harrowings (CT, minimum tillage with one chisel plowing + one harrowing (MT, and no tillage (NT; and b bare soil: one plowing + two harrowings (BS. In CT, MT, and NT, black oat, soybean, vetch, corn, turnip, and black beans were cultivated. Over the 15 years, 15.5 Mg ha-1 of limestone, 525 kg ha-1 of N (urea, 1,302 kg ha-1 of P2O5 (triple superphosphate, and 1,075 kg ha-1 of K2O (potassium chloride were used in the soil. The P, K, Ca, Mg, and organic C contents in the soil were determined and also the P, K, Ca, and Mg sediments in the runoff water. From these contents, the total losses, the enrichment rates (ER, and financial losses were calculated. The NT increased the P, K, and organic C contents in the topsoil. The nutrients and organic C content in the runoff from NT was greater than from CT, showing that NT was not a fully conservationist practice for soil. The linear model y = a + bx fit the data within the level of significance (p≤0.01 when the values of P, K, and organic C in the sediments from erosion were related to those values in the soil surface layer. The nutrient and organic C contents were higher in the sediments from erosion than in the soil where the erosion originated, generating values of ER>1 for P, K, and organic C. The value of the total losses

Acetylcholinesterase Reactivators (HI-6, Obidoxime, Trimedoxime, K027, K075, K127, K203, K282: Structural Evaluation of Human Serum Albumin Binding and Absorption Kinetics

Directory of Open Access Journals (Sweden)

Filip Zemek

2013-08-01

Full Text Available Acetylcholinesterase (AChE reactivators (oximes are compounds predominantly targeting the active site of the enzyme. Toxic effects of organophosphates nerve agents (OPNAs are primarily related to their covalent binding to AChE and butyrylcholinesterase (BChE, critical detoxification enzymes in the blood and in the central nervous system (CNS. After exposure to OPNAs, accumulation of acetylcholine (ACh overstimulates receptors and blocks neuromuscular junction transmission resulting in CNS toxicity. Current efforts at treatments for OPNA exposure are focused on non-quaternary reactivators, monoisonitrosoacetone oximes (MINA, and diacylmonoxime reactivators (DAM. However, so far only quaternary oximes have been approved for use in cases of OPNA intoxication. Five acetylcholinesterase reactivator candidates (K027, K075, K127, K203, K282 are presented here, together with pharmacokinetic data (plasma concentration, human serum albumin binding potency. Pharmacokinetic curves based on intramuscular application of the tested compounds are given, with binding information and an evaluation of structural relationships. Human Serum Albumin (HSA binding studies have not yet been performed on any acetylcholinesterase reactivators, and correlations between structure, concentration curves and binding are vital for further development. HSA bindings of the tested compounds were 1% (HI-6, 7% (obidoxime, 6% (trimedoxime, and 5%, 10%, 4%, 15%, and 12% for K027, K075, K127, K203, and K282, respectively.

Search for the decay B^0 --> K^0_S K^0_S K^0_L

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2006-06-27

The authors present the first search for the decay B{sup 0} {yields} K{sub S}{sup 0} K{sub S}{sup 0} K{sub L}{sup 0} using a data sample of 232 million B{bar B} pairs. They find no statistically significant evidence for the non-resonant component of this decay. Our central value for the branching fraction, assuming the tru Dalitz distribution is uniform and excluding the {phi} resonance, is {Beta}(B{sup 0} {yields} K{sub S}{sup 0} K{sub S}{sup 0} K{sub L}{sup 0}) = (2.4{sub -2.5}{sup +2.7} {+-} 0.6) x 10{sup -6} where the errors are statistical and systematic, respectively. They set a single-side Bayesian upper limit of {Beta}(B{sup 0} {yields} K{sub S}{sup 0} K{sub S}{sup 0} K{sub L}{sup 0}) < 6.4 x 10{sup -6} at 90% confidence level using a uniform prior probability for physical values. Assuming the worst-case true Dalitz distribution, where the signal is entirely in the region of lowest efficiency, the 90% confidence level upper limit is {Beta}(B{sup 0} {yields} K{sub S}{sup 0} K{sub S}{sup 0} K{sub L}{sup 0}) < 14 x 10{sup -6}.

Observation of $\\pi^- K^+$ and $\\pi^+ K^-$ atoms

CERN Document Server

Adeva, B; The PS212 collaboration; Allkofer, Y.; Amsler, C.; Anania, A.; Aogaki, S.; Benelli, A.; Brekhovskikh, V.; Cechak, T.; Chiba, M.; Chliapnikov, P.; Doskarova, P.; Drijard, D.; Dudarev, A.; Dumitriu, D.; Fluerasu, D.; Gorin, A.; Gorchakov, O.; Gritsay, K.; Guaraldo, C.; Gugiu, M.; Hansroul, M.; Hons, Z.; Horikawa, S.; Iwashita, Y.; Karpukhin, V.; Kluson, J.; Kobayashi, M.; Kruglov, V.; Kruglova, L.; Kulikov, A.; Kulish, E.; Kuptsov, A.; Lamberto, A.; Lanaro, A.; Lednicky, R.; Marinas, C.; Martincik, J.; Nikitin, M.; Okada, K.; Olchevskii, V.; Pentia, M.; Penzo, A.; Plo, M.; Prusa, P.; Rappazzo, G.; Vidal, A.Romero; Ryazantsev, A.; Rykalin, V.; Saborido, J.; Sidorov, A.; Smolik, J.; Takeutchi, F.; Tauscher, L.; Trojek, T.; Trusov, S.; Urban, T.; Vrba, T.; Yazkov, V.; Yoshimura, Y.; Zhabitsky, M.; Zrelov, P.

2016-01-01

The observation of hydrogen-like $\\pi K$ atoms, consisting of $\\pi^- K^+$ or $\\pi^+ K^-$ mesons, is presented. The atoms have been produced by 24 GeV/$c$ protons from the CERN PS accelerator, interacting with platinum or nickel foil targets. The breakup (ionisation) of $\\pi K$ atoms in the same targets yields characteristic $\\pi K$ pairs, called ``atomic pairs'', with small relative momenta in the pair centre-of-mass system. The upgraded DIRAC experiment has observed $349\\pm62$ such atomic $\\pi K$ pairs, corresponding to a signal of 5.6 standard deviations.

Rare decay modes of K*(1420) and K*(892)

International Nuclear Information System (INIS)

Jongejans, B.; Blokjijl, R.; Kluyver, J.C.; Massaro, G.G.G.; Voorthuis, H.; Engelen, J.J.; Metzger, W.J.; Pols, C.L.A.; Foster, B.; McDowell, L.; Wells, J.

1978-01-01

A 2.5 standard deviation signal is observed for the decay K* - (1420) → K* - (892)π + π - . From this signal a partial width of 13.0 +- 5.0 MeV for the decay mode K*(1420) → K*(892)ππ is deduced under the assumption that the ππ system is in an I = 1 state. For the rare decay mode K*(892) → Kππ no signal is observed. The following upper limits can be given for the decay widths: GAMMAsub(K* - (892) → K - π + π - ) - (892) → anti K 0 π - π 0 ) 0 (892) → anti K 0 π + π - ) < 35 keV. (Auth.)

3000 MW wind scenari in France in 2010: first evaluation of prices and extra costs

International Nuclear Information System (INIS)

Chabot, B.

2000-01-01

The objective '3000 MW of wind power in 2010' quoted in the national plan to counter the greenhouse effect and taken up by the French ADEME, requires, if it is to be achieved, a change from the present system of tenders and offers to a system of programmed annual phases. This present system sets prices for each project chosen after a competition and han demonstrated its limitations. These phases could concern different classes of project (greater or less than 12 MW, agricultural wind power, specific regional phases, offshore wind power, etc). It would be set annually in MW, to be achieved within the three following years, by prices guaranteed for a given period and by the rhythm of annual reduction in these prices for new projects. This system would thus move closer to that in countries (Germany, Denmark, Spain) that have a domestic development of wind energy conforming with the objectives in the EU White Paper on renewable energy (40 GW operational in 2010). This First overall evaluation (not yet divided into project class) gives ranges of guaranteed prices, installations and annual and cumulative production, discounted annual and until extra costs, in line with the assumptions of the value factor and in line with external differential in favour of wind energy. This external differential enters in the accounts from 2006 (0, 5, 10 and 15 cF/kWh). This extra cost could be taken care of through the compensatory refunding of public service charges provided for in the law concerning modernization and liberalization in the electricity sector. This scenario aims at 3 GW operational by 2010, producing 8 F/subscriber). Discounted at 8%, this extra colt is 7 GF. This overall extra cost (discounted or not) is cancelled our with an external differential 17 cF/kWh. Brought back to the kWh produced, the overall discounted unit cost varies linearly, whatever the discount rate chosen, by around 17 cF/kWh with no external differential, to 0 cF/kWh for an external differential of

Energy use, cost and CO2 emissions of electric cars

International Nuclear Information System (INIS)

van Vliet, Oscar; Brouwer, Anne Sjoerd; Kuramochi, Takeshi; van den Broek, Machteld; Faaij, Andre

2011-01-01

We examine efficiency, costs and greenhouse gas emissions of current and future electric cars (EV), including the impact from charging EV on electricity demand and infrastructure for generation and distribution. Uncoordinated charging would increase national peak load by 7% at 30% penetration rate of EV and household peak load by 54%, which may exceed the capacity of existing electricity distribution infrastructure. At 30% penetration of EV, off-peak charging would result in a 20% higher, more stable base load and no additional peak load at the national level and up to 7% higher peak load at the household level. Therefore, if off-peak charging is successfully introduced, electric driving need not require additional generation capacity, even in case of 100% switch to electric vehicles. GHG emissions from electric driving depend most on the fuel type (coal or natural gas) used in the generation of electricity for charging, and range between 0 g km -1 (using renewables) and 155 g km -1 (using electricity from an old coal-based plant). Based on the generation capacity projected for the Netherlands in 2015, electricity for EV charging would largely be generated using natural gas, emitting 35-77 g CO 2 eq km -1 . We find that total cost of ownership (TCO) of current EV are uncompetitive with regular cars and series hybrid cars by more than 800 EUR year -1 . TCO of future wheel motor PHEV may become competitive when batteries cost 400 EUR kWh -1 , even without tax incentives, as long as one battery pack can last for the lifespan of the vehicle. However, TCO of future battery powered cars is at least 25% higher than of series hybrid or regular cars. This cost gap remains unless cost of batteries drops to 150 EUR kWh -1 in the future. Variations in driving cost from charging patterns have negligible influence on TCO. GHG abatement costs using plug-in hybrid cars are currently 400-1400 EUR tonne -1 CO 2eq and may come down to -100 to 300 EUR tonne -1 . Abatement cost using

Study on the fuel cycle cost of gas turbine high temperature reactor (GTHTR300). Contract research

Energy Technology Data Exchange (ETDEWEB)

Takei, Masanobu; Katanishi, Shoji; Nakata, Tetsuo; Kunitomi, Kazuhiko [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Oda, Takefumi; Izumiya, Toru [Nuclear Fuel Industries, Ltd., Tokyo (Japan)

2002-11-01

In the basic design of gas turbine high temperature reactor (GTHTR300), reduction of the fuel cycle cost has a large benefit of improving overall plant economy. Then, fuel cycle cost was evaluated for GTHTR300. First, of fuel fabrication for high-temperature gas cooled reactor, since there was no actual experience with a commercial scale, a preliminary design for a fuel fabrication plant with annual processing of 7.7 ton-U sufficient four GTHTR300 was performed, and fuel fabrication cost was evaluated. Second, fuel cycle cost was evaluated based on the equilibrium cycle of GTHTR300. The factors which were considered in this cost evaluation include uranium price, conversion, enrichment, fabrication, storage of spent fuel, reprocessing, and waste disposal. The fuel cycle cost of GTHTR300 was estimated at about 1.07 yen/kWh. If the back-end cost of reprocessing and waste disposal is included and assumed to be nearly equivalent to LWR, the fuel cycle cost of GTHTR300 was estimated to be about 1.31 yen/kWh. Furthermore, the effects on fuel fabrication cost by such of fuel specification parameters as enrichment, the number of fuel types, and the layer thickness were considered. Even if the enrichment varies from 10 to 20%, the number of fuel types change from 1 to 4, the 1st layer thickness of fuel changes by 30 {mu}m, or the 2nd layer to the 4th layer thickness of fuel changes by 10 {mu}m, the impact on fuel fabrication cost was evaluated to be negligible. (author)

Techno-economic analysis of a 2.1 kW rooftop photovoltaic-grid-tied system based on actual performance

International Nuclear Information System (INIS)

Adaramola, Muyiwa S.

2015-01-01

Highlights: • The economic analysis of rooftop PV grid-tied installation is examined. • Based on actual performance, the LCOE of the system is estimated as US$0.246/kW h. • Feed-in-tariff of US$0.356/kW h is estimated with no financial support. • To encourage installation of PV system, financial support of up to 40% of the investment is suggested. - Abstract: As more attention is being focus on the development of renewable energy resources globally, technical and economic assessments of these resources are crucial to ascertain their viability. These assessments can be more meaningful, if they are based on field and actual performance of the renewable energy conversion systems. This study presents the economic analysis of a rooftop 2.07 kW grid-connected photovoltaic energy system installation located in Ås (59.65°N and longitude 10.76°E, and about 105 m above sea level), Norway. Both the annual and monthly costs of energy produced by the system are determined. In addition, the feed-in tariff that can give internal rate of return of about 7.5% on investment on this installation was examined. Based on assumptions used in this study, feed-in-tariff of US$0.356/kW h is estimated for a project with economic life of 25 years with no other financial support. This translates to US$0.110/kW h premium over the levelized cost of energy of US$0.246/kW h generated by the system. However, if the financial support is more than 45% of the initial investment cost, no further premium fee is necessary to support this type of system

Thin film solar modules: the low cost, high throughput and versatile alternative to Si wafers

Energy Technology Data Exchange (ETDEWEB)

Hegedus, S. [Delaware Univ., Inst. of Energy Conversion, Newark, DE (United States)

2006-07-01

Thin film solar cells (TFSC) have passed adolescence and are ready to make a substantial contribution to the world's electricity generation. They can have advantages over c-Si solar modules in ease of large area, lower cost manufacturing and in several types of applications. Factors which limit TFSC module performance relative to champion cell performance are discussed along with the importance of increased throughput and yield. The consensus of several studies is that all TFSC can achieve costs below 1 $/W if manufactured at sufficiently large scale >100 MW using parallel lines of cloned equipment with high material utilization and spray-on encapsulants. There is significant new commercial interest in TFSC from small investors and large corporations, validating the thin film approach. Unique characteristics are discussed which give TFSC an advantage over c-Si in two specific markets: small rural solar home systems and building integrated photovoltaic installations. TFSC have outperformed c-Si in annual energy production (kWhrs/kW), have demonstrated outdoor durability comparable to c-Si and are being used in MW scale installations worldwide. The merits of the thin film approach cannot be judged on the basis of efficiency alone but must also account for module performance and potential for low cost. TFSC advocates should promote their unique virtues compared to c-Si: lower cost, higher kWhr/kW output, higher battery charging current, attractive visual appearance, flexible substrates, long-term stability comparable to c-Si, and multiple pathways for deposition with room for innovation and evolutionary improvement. There is a huge market for TFSC even at today's efficiency if costs can be reduced. A brief window of opportunity exists for TFSC over the next few years due the Si shortage. The demonstrated capabilities and advantages of TFSC must be proclaimed more persistently to funding decision-makers and customers without minimizing the remaining

Ch(k) grammars: A characterization of LL(k) languages

NARCIS (Netherlands)

Becvar, J.; Nijholt, Antinus; Soisalon-Soininen, E.

In this paper we introduce the class of so called Ch(k) grammars [pronounced "chain k grammars"]. This class of grammars is properly contained in the class of LR(k) grammars and it properly contains the LL(k) grammars. However, the family of Ch[k) languages coincides with the family of LL(k)

Results from K2K experiment

International Nuclear Information System (INIS)

Yanagisawa, Chiaki

2001-01-01

The K2K experiment is the first long baseline neutrino oscillation experiment at KEK and at Kamioka, Japan. This is a brief summary of the K2K experiment in the first year of running from June 1999 to June 2000. The major result is that for the first time in human history artificially produced neutrinos by an accelerator are detected at a long distance of 250km from the production points. A brief introduction, the detector performance and the some analysis results are presented. The analysis results are based on the data corresponding to the integrated beam intesnsity of 2.29 x 10 19 pot

The Costs of Public and Private Gas Enterprises in Late 19th Century Britain.

OpenAIRE

Millward, Robert; Ward, Robert

1987-01-01

Data for a sample of thirty-five U.K. gas undertakings for 1898 was used to estimate a translog cost function. Labor accou nted for less than 15 percent of total costs. Changes in outlays on c oal have significant effects on total costs. Economies of scale exist but tend to disappear at production volumes which are near to averag e for the provincial gas undertakings. After controlling for factor p rices, population density, and output levels, municipal enterprises a re shown to have lower co...

The costs and profitability of heat-energy entrepreneurship

International Nuclear Information System (INIS)

Solmio, H.

1998-01-01

Heat-energy entrepreneurs are responsible for the supply of fuel to and the labour input required by heating of buildings in their locality. An individual heat-energy entrepreneur or a consortium of them, a company or a co-operative is paid for the work according to the amount of heat-energy produced. In Finland there are about 50 operational heating targets and about 100 in planning stage. TTS-Institute has studied the activities of heat-energy entrepreneurs since 1993 in connection with research projects included in the national Bioenergy research programme. This study covered 10 heating plants with capacities 60 - 1000 kW, two of which are district heating plants. Five of the targets (60 - 370 kW) were included in the previous heat-energy entrepreneurs follow-up study conducted in 1993 - 1995 and five (80 - 1000 kW) were new. The main fuel used in all the targets was wood chips with light fuel oil reserve or auxiliary fuel. All but one of the entrepreneurs, supplying these heating targets located in Central and Southern Finland, are farmers, who procure the fuelwood and take care of heating and its supervision. Transportation of wood chips, topping up of the silo and heating work and working path consumed 0.12-0.78 h of time/MWh. When compared to the five study targets' follow-up results of the years 1993 - 1995, the results of the present study show reduction in labour consumption on part of the heat-energy entrepreneurs in all these targets. Profit margins of the entrepreneurs supplying heating energy were 73 - 132 FIM/h (excluding the interest on the equipment acquisition (agricultural tractor and associated equipment), and insurance and storage costs). When these costs were also taken into account, the resulting profit margin was 71 - 127 FIM/h. The margin included the entrepreneurs' earnings incl. monitoring of the heating plant, social security costs connected to earnings and entrepreneur's risk. When compared to the previous follow-up study, also the

MegaFlex Scale-Up Cost & Risk Reduction for >50kW Future Power Demands, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — As the MegaFlex solar array is scaled for power demands greater than 50kW over the next 20 years and deployed load requirements remain high or increase, advanced...

Low-cost far infrared bolometer camera for automotive use

Science.gov (United States)

Vieider, Christian; Wissmar, Stanley; Ericsson, Per; Halldin, Urban; Niklaus, Frank; Stemme, Göran; Källhammer, Jan-Erik; Pettersson, Håkan; Eriksson, Dick; Jakobsen, Henrik; Kvisterøy, Terje; Franks, John; VanNylen, Jan; Vercammen, Hans; VanHulsel, Annick

2007-04-01

A new low-cost long-wavelength infrared bolometer camera system is under development. It is designed for use with an automatic vision algorithm system as a sensor to detect vulnerable road users in traffic. Looking 15 m in front of the vehicle it can in case of an unavoidable impact activate a brake assist system or other deployable protection system. To achieve our cost target below €100 for the sensor system we evaluate the required performance and can reduce the sensitivity to 150 mK and pixel resolution to 80 x 30. We address all the main cost drivers as sensor size and production yield along with vacuum packaging, optical components and large volume manufacturing technologies. The detector array is based on a new type of high performance thermistor material. Very thin Si/SiGe single crystal multi-layers are grown epitaxially. Due to the resulting valence barriers a high temperature coefficient of resistance is achieved (3.3%/K). Simultaneously, the high quality crystalline material provides very low 1/f-noise characteristics and uniform material properties. The thermistor material is transferred from the original substrate wafer to the read-out circuit using adhesive wafer bonding and subsequent thinning. Bolometer arrays can then be fabricated using industry standard MEMS process and materials. The inherently good detector performance allows us to reduce the vacuum requirement and we can implement wafer level vacuum packaging technology used in established automotive sensor fabrication. The optical design is reduced to a single lens camera. We develop a low cost molding process using a novel chalcogenide glass (GASIR®3) and integrate anti-reflective and anti-erosion properties using diamond like carbon coating.

Additively Manufactured Low Cost Upper Stage Combustion Chamber

Science.gov (United States)

Protz, Christopher; Cooper, Ken; Ellis, David; Fikes, John; Jones, Zachary; Kim, Tony; Medina, Cory; Taminger, Karen; Willingham, Derek

2016-01-01

Over the past two years NASA's Low Cost Upper Stage Propulsion (LCUSP) project has developed Additive Manufacturing (AM) technologies and design tools aimed at reducing the costs and manufacturing time of regeneratively cooled rocket engine components. High pressure/high temperature combustion chambers and nozzles must be regeneratively cooled to survive their operating environment, causing their design fabrication to be costly and time consuming due to the number of individual steps and different processes required. Under LCUSP, AM technologies in Sintered Laser Melting (SLM) GRCop-84 and Electron Beam Freeform Fabrication (EBF3) Inconel 625 have been significantly advanced, allowing the team to successfully fabricate a 25k-class regenerative chamber. Estimates of the costs and schedule of future builds indicate cost reductions and significant schedule reductions will be enabled by this technology. Characterization of the microstructural and mechanical properties of the SLM-produced GRCop-84, EBF3 Inconel 625 and the interface layer between the two has been performed and indicates the properties will meet the design requirements. The LCUSP chamber is to be tested with a previously demonstrated SLM injector in order to advance the Technology Readiness Level (TRL) and demonstrate the capability of the application of these processes. NASA is advancing these technologies to reduce cost and schedule for future engine applications and commercial needs.

The high intensity solar cell: Key to low cost photovoltaic power

Science.gov (United States)

Sater, B. L.; Goradia, C.

1975-01-01

The design considerations and performance characteristics of the 'high intensity' (HI) solar cell are presented. A high intensity solar system was analyzed to determine its cost effectiveness and to assess the benefits of further improving HI cell efficiency. It is shown that residential sized systems can be produced at less than $1000/kW peak electric power. Due to their superior high intensity performance characteristics compared to the conventional and VMJ cells, HI cells and light concentrators may be the key to low cost photovoltaic power.

Robust k-mer frequency estimation using gapped k-mers.

Science.gov (United States)

Ghandi, Mahmoud; Mohammad-Noori, Morteza; Beer, Michael A

2014-08-01

Oligomers of fixed length, k, commonly known as k-mers, are often used as fundamental elements in the description of DNA sequence features of diverse biological function, or as intermediate elements in the constuction of more complex descriptors of sequence features such as position weight matrices. k-mers are very useful as general sequence features because they constitute a complete and unbiased feature set, and do not require parameterization based on incomplete knowledge of biological mechanisms. However, a fundamental limitation in the use of k-mers as sequence features is that as k is increased, larger spatial correlations in DNA sequence elements can be described, but the frequency of observing any specific k-mer becomes very small, and rapidly approaches a sparse matrix of binary counts. Thus any statistical learning approach using k-mers will be susceptible to noisy estimation of k-mer frequencies once k becomes large. Because all molecular DNA interactions have limited spatial extent, gapped k-mers often carry the relevant biological signal. Here we use gapped k-mer counts to more robustly estimate the ungapped k-mer frequencies, by deriving an equation for the minimum norm estimate of k-mer frequencies given an observed set of gapped k-mer frequencies. We demonstrate that this approach provides a more accurate estimate of the k-mer frequencies in real biological sequences using a sample of CTCF binding sites in the human genome.

Search for the Theta+ pentaquark in the reactions gammap-->[overline K]0K+n and gammap-->[overline K]0K0p

Energy Technology Data Exchange (ETDEWEB)

Raffaella De Vita; Marco Battaglieri; V. Kubarovsky; Nathan Baltzell; Matthew Bellis; John Goett; Lei Guo; Gordon Mutchler; Paul Stoler; Maurizio Ungaro; Dennis Weygand; Moscov Amaryan; Pawel Ambrozewicz; Marco Anghinolfi; Gegham Asryan; Harutyun AVAKIAN; Harutyun Avakian; Hovhannes Baghdasaryan; Nathan Baillie; Jacques Ball; Vitaly Baturin; Ivan Bedlinski; Ivan Bedlinskiy; Nawal Benmouna; Barry Berman; Angela Biselli; Sergey Boyarinov; Sylvain Bouchigny; Robert Bradford; Derek Branford; William Briscoe; William Brooks; Stephen Bueltmann; Volker Burkert; Cornel Butuceanu; John Calarco; Sharon Careccia; Daniel Carman; Shifeng Chen; Eric Clinton; Philip Cole; Patrick Collins; Philip Coltharp; Donald Crabb; Hall Crannell; Volker Crede; John Cummings; D. Dale; Raffaella De Vita; Enzo De Sanctis; Pavel Degtiarenko; Alexandre Deur; Kahanawita Dharmawardane; Chaden Djalali; Gail Dodge; Joseph Donnelly; David Doughty; Michael Dugger; Oleksandr Dzyubak; Hovanes Egiyan; Kim Egiyan; Lamiaa Elfassi; Latifa Elouadrhiri; Paul Eugenio; Gleb Fedotov; Herbert Funsten; Marianna Gabrielyan; Liping Gan; Michel Garcon; Ashot Gasparian; Gagik Gavalian; Gerard Gilfoyle; Kevin Giovanetti; Francois-Xavier Girod; Oleksandr Glamazdin; John Goetz; Evgueni Golovatch; Atilla Gonenc; Christopher Gordon; Ralf Gothe; Keith Griffioen; Michel Guidal; Nevzat Guler; Harutyun Gyurjyan; Cynthia Hadjidakis; Kawtar Hafidi; Hayk Hakobyan; Rafael Hakobyan; John Hardie; F. Hersman; Kenneth Hicks; Ishaq Hleiqawi; Maurik Holtrop; Charles Hyde-Wright; Yordanka Ilieva; David Ireland; Boris Ishkhanov; Eugeny Isupov; Mark Ito; D. Jenkins; Hyon-Suk Jo; Kyungseon Joo; Henry Juengst; James Kellie; Mahbubul Khandaker; Wooyoung Kim; Andreas Klein; Franz Klein; Alexei Klimenko; Mikhail Kossov; Laird Kramer; Joachim Kuhn; Sebastian Kuhn; Sergey Kuleshov; Jeff Lachniet; Jean Laget; Jorn Langheinrich; Dave Lawrence; Tsung-shung Lee; Ji Li; K. Livingston; Haiyun Lu; Marion MacCormick; Nikolai Markov; Bryan McKinnon; Bernhard Mecking; Joseph Melone; Mac Mestayer; Curtis Meyer; Tsutomu Mibe; Konstantin Mikhaylov; Ralph Minehart; Marco Mirazita; R. Miskimen; Vasiliy Mochalov; Viktor Mokeev; Ludyvine Morand; Steven Morrow; Maryam Moteabbed; Pawel Nadel-Turonski; Itaru Nakagawa; Rakhsha Nasseripour; Silvia Niccolai; Gabriel Niculescu; Maria-Ioana Niculescu; Bogdan Niczyporuk; Megh Niroula; Rustam Niyazov; Mina Nozar; Mikhail Osipenko; Alexander Ostrovidov; Kijun Park; Evgueni Pasyuk; Craig Paterson; Joshua Pierce; Nikolay Pivnyuk; Dinko Pocanic; Oleg Pogorelko; Sergey Pozdnyakov; John Price; Yelena Prok; Dan Protopopescu; Brian Raue; Gregory Riccardi; Giovanni Ricco; Marco Ripani; Barry Ritchie; Federico Ronchetti; Guenther Rosner; Patrizia Rossi; Franck Sabatie; Carlos Salgado; Joseph Santoro; Vladimir Sapunenko; Reinhard Schumacher; Vladimir Serov; Youri Sharabian; Nikolay Shvedunov; Elton Smith; Lee Smith; Daniel Sober; Aleksey Stavinskiy; Samuel Stepanyan; Stepan Stepanyan; Burnham Stokes; Igor Strakovski; Steffen Strauch; Mauro Taiuti; David Tedeschi; Aram Teymurazyan; Ulrike Thoma; Avtandil Tkabladze; Svyatoslav Tkachenko; Luminita Todor; Clarisse Tur; Michael Vineyard; Alexander Vlassov; Daniel Watts; Lawrence Weinstein; M. Williams; Elliott Wolin; Michael Wood; Amrit Yegneswaran; Lorenzo Zana; Jixie Zhang; Bo Zhao; Zhiwen Zhao

2006-11-16

The exclusive reactions {gamma}p {yields} {bar K}{sup 0} K{sup +} n and {gamma}p {yields} {bar K}{sup 0} K{sup 0} p have been studied in the photon energy range 1.6--3.8 GeV, searching for evidence of the exotic baryon {Theta}{sup +}(1540) in the decays {Theta}{sup +} {yields} nK{sup +} and {Theta}{sup +} {yields} pK{sup 0}. Data were collected with the CLAS detector at the Thomas Jefferson National Accelerator Facility. The integrated luminosity was about 70 pb{sup -1}. The reactions have been isolated by detecting the K{sup +} and proton directly, the neutral kaon via its decay to K{sub S} {yields} {pi}{sup +}{pi}{sup -} and the neutron or neutral kaon via the missing mass technique. The mass and width of known hyperons such as {Sigma}{sup +}, {Sigma}{sup -} and {Lambda}(1116) were used as a check of the mass determination accuracy and experimental resolution. Approximately 100,000 {Lambda}*(1520)'s and 150,000 {phi}'s were observed in the {bar K}{sup 0} K{sup +} n and {bar K}{sup 0} K{sup 0} p final state respectively. No evidence for the {Theta}{sup +} pentaquark was found in the nK{sup +} or pK{sub S} invariant mass spectra. Upper limits were set on the production cross section of the reaction {gamma}p {yields} {Theta}{sup +} {bar K}{sup 0} as functions of center-of-mass angle, nK{sup +} and pK{sub S} masses. Combining the results of the two reactions, the 95% C.L. upper limit on the total cross section for a resonance peaked at 1540 MeV was found to be 0.7 nb. Within most of the available theoretical models, this corresponds to an upper limit on the {Theta}{sup +} width, {Gamma}{sub {Theta}{sup +}}, ranging between 0.01 and 7 MeV.

Calendar aging of a 250 kW/500 kWh Li-ion battery deployed for the grid storage application

Science.gov (United States)

Kubiak, Pierre; Cen, Zhaohui; López, Carmen M.; Belharouak, Ilias

2017-12-01

The introduction of Li-ion batteries for grid applications has become evidence as the cost per kWh is continuously decreasing. Although the Li-ion battery is a mature technology for automotive applications and portable electronics, its use for stationary applications needs more validation. The Li-ion technology is considered safe enough for grid storage application, but its lifetime is generally evaluated to be around 10 years. Higher market penetration will be achieved if a longer lifespan could be demonstrated. Therefore, aging evaluation of the batteries becomes crucial. In this paper we investigated the effects of aging after a three years' standby field deployment of a 250 kW/500 kWh Li-ion battery integrated with the grid and solar farm under the harsh climate conditions of Qatar. The development of tools for acquisition and analysis of data from the battery management system (BMS) allows the assessment of the battery performance at the battery stack, string and cell levels. The analysis of the residual capacity after aging showed that the stack suffered from a low decrease of capacity, whereas some inconsistencies have been found between the strings. These inconsistencies are caused by misalignment of a small number of cells that underwent self-discharge during standby at high state of charge.

Integrating robust timetabling in line plan optimization for railway systems

DEFF Research Database (Denmark)

Burggraeve, Sofie; Bull, Simon Henry; Lusby, Richard Martin

The line planning problem in rail is to select a number of lines froma potential pool which provides sufficient passenger capacity and meetsoperational requirements, with some objective measure of solution linequality. We model the problem of minimizing the average passenger systemtime, including...... frequency-dependent estimates for switching between lines,working with the Danish rail operator DSB and data for Copenhagen commuters.We present a multi-commodity flow formulation for the problemof freely routing passengers, coupled to discrete line-frequency decisionsselecting lines from a predefined pool...

The costs of electricity interruptions in Spain. Are we sending the right signals?

International Nuclear Information System (INIS)

Linares, Pedro; Rey, Luis

2013-01-01

One of the objectives of energy security is the uninterrupted physical availability of energy. However, there is limited information about how much is the cost of energy supply interruptions. This information is essential to optimize investment and operating decisions to prevent energy shortages, or, alternatively, to determine the strength of the signals to be sent to the agents so that they may invest accordingly. In this paper, we estimate the economic impact of an electricity interruption in different sectors and regions of Spain. Although there are several caveats in our analysis, we find that in 2008 the cost for the Spanish economy of one kWh of electricity not supplied was above €4 even in a conservative scenario, which is higher than the signals currently being sent as incentives to avoid these interruptions. This might result in an underinvestment in short-term energy security, particularly when we add the usual risk aversion of most consumers. - Highlights: • We calculate the costs of electricity interruptions in Spain. • We find that in 2008 the cost for the Spanish economy of one kWh of electricity not supplied was around €6. • The results imply that Spain is underinvesting in short-term energy security

Cost Estimation and Comparison of Carbon Capture and Storage Technology with Wind Energy

Directory of Open Access Journals (Sweden)

ABDULLAH MENGAL

2017-04-01

Full Text Available The CCS (Carbon Capture and Storage is one of the significant solutions to reduce CO2 emissions from fossil fuelled electricity generation plants and minimize the effect of global warming. Economic analysis of CCS technology is, therefore, essential for the feasibility appraisal towards CO2 reduction. In this paper LCOE (Levelized Cost of Electricity Generation has been estimated with and without CCS technology for fossil fuel based power plants of Pakistan and also further compared with computed LCOE of WE (Wind Energy based power plants of the Pakistan. The results of this study suggest that the electricity generation costs of the fossil fuel power plants increase more than 44% with CCS technology as compared to without CCS technology. The generation costs are also found to be 10% further on higher side when considering efficiency penalty owing to installation of CCS technology. In addition, the CO2 avoided costs from natural gas plant are found to be 40 and 10% higher than the local coal and imported coal plants respectively. As such, the electricity generation cost of 5.09 Rs/kWh from WE plants is found to be competitive even when fossil fuel based plants are without CCS technology, with lowest cost of 5.9 Rs./kWh of CCNG (Combined Cycle Natural Gas plant. Based on analysis of results of this study and anticipated future development of efficient and cheap WE technologies, it is concluded that WE based electricity generation would be most appropriate option for CO2 reduction for Pakistan.

Nucleoli in human early erythroblasts (K2, K1, K1/2 cells).

Science.gov (United States)

Smetana, K; Jirásková, I; Klamová, H

2005-01-01

Human early erythroid precursors classified according to the nuclear size were studied to provide information on nucleoli in these cells using simple cytochemical procedures for demonstration of RNA and proteins of silver-stained nucleolar organizers. K2 cells with nuclear diameter larger than 13 microm and K1 cells with nuclear diameter larger than 9 microm corresponding to proerythroblasts and macroblasts (large basophilic erythroblasts) mostly possessed large irregularly shaped nucleoli with multiple fibrillar centres representing "active nucleoli". K1/2 cells with nuclear diameter smaller than 9 microm corresponding to small basophilic erythroblasts were usually characterized by the presence of micronucleoli representing "inactive nucleolar types". On the other hand, a few K1/2 cells contained large nucleoli with multiple fibrillar centres similar to those present in K2 cells and thus appeared as "microproerythroblasts". The nucleolar asynchrony expressed by the presence of large irregularly shaped nucleoli with multiple nucleoli (active nucleoli) and ring-shaped nucleoli (resting nucleoli) in one and the same nucleus of K2 or K1 cells was not exceptional and might reflect a larger resistance of these cells to negative factors influencing the erythropoiesis. The intranucleolar translocation of silver-stained nucleolus organized regions was noted in K2 cells and might indicate the premature aging of these cells without further differentiation. More studies, however, are required in this direction.

330 kWe Packaged CHP System with Reduced Emissions

Energy Technology Data Exchange (ETDEWEB)

Plahn, Paul [Cummins Power Generation, Minneapolis, MN (United States); Keene, Kevin [Cummins Power Generation, Minneapolis, MN (United States); Pendray, John [Cummins Power Generation, Minneapolis, MN (United States)

2015-03-31

The objective of this project was to develop a flexible, 330 kWe packaged Combined Heat and Power (CHP) system that can be deployed to commercial and light industrial applications at a lower total cost of ownership than current CHP solutions. The project resulted in a CHP system that is easy to use and inexpensive to install, offering world class customer support, while providing a low-emissions, higher-efficiency internal combustion engine for a CHP system of this size.

Cost Probability Analysis of China's Nuclear Fuel Cycle Transition

International Nuclear Information System (INIS)

Gao, R. X.; Ko, W. I.; Lee, S. H.

2015-01-01

The Chinese government has already determined to develop the closed nuclear fuel cycle, its long-term roadmap of spent fuel management has not been decided yet. Currently, it seems that China's booming economy gives abundant financial assurance to develop nuclear programs in full play according to its near-term national plans. However, the viability and sustainability of nuclear power always depends critically on its economics. Therefore, it is necessary to conduct a well focused cost-benefit and objective analysis of China's ongoing nuclear power programs with the future prospects. In this study, we conduct a comparative analysis of electricity generation cost in four reference nuclear fuel cycle transition scenarios by 2050. Direct disposal is assumed to produce the cheapest LCT as low as 62.688 mills/kWh compared to the other options. However, after performing a relative uncertainty study, the results show that the capital cost of reactor is the key cost component which leads to the cost gap

Cost Probability Analysis of China's Nuclear Fuel Cycle Transition

Energy Technology Data Exchange (ETDEWEB)

Gao, R. X. [Univ. of Science and Technology, Daejeon (Korea, Republic of); Ko, W. I.; Lee, S. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-05-15

The Chinese government has already determined to develop the closed nuclear fuel cycle, its long-term roadmap of spent fuel management has not been decided yet. Currently, it seems that China's booming economy gives abundant financial assurance to develop nuclear programs in full play according to its near-term national plans. However, the viability and sustainability of nuclear power always depends critically on its economics. Therefore, it is necessary to conduct a well focused cost-benefit and objective analysis of China's ongoing nuclear power programs with the future prospects. In this study, we conduct a comparative analysis of electricity generation cost in four reference nuclear fuel cycle transition scenarios by 2050. Direct disposal is assumed to produce the cheapest LCT as low as 62.688 mills/kWh compared to the other options. However, after performing a relative uncertainty study, the results show that the capital cost of reactor is the key cost component which leads to the cost gap.

Cost, Energy, and Environmental Impact of Automated Electric Taxi Fleets in Manhattan.

Science.gov (United States)

Bauer, Gordon S; Greenblatt, Jeffery B; Gerke, Brian F

2018-04-17

Shared automated electric vehicles (SAEVs) hold great promise for improving transportation access in urban centers while drastically reducing transportation-related energy consumption and air pollution. Using taxi-trip data from New York City, we develop an agent-based model to predict the battery range and charging infrastructure requirements of a fleet of SAEVs operating on Manhattan Island. We also develop a model to estimate the cost and environmental impact of providing service and perform extensive sensitivity analysis to test the robustness of our predictions. We estimate that costs will be lowest with a battery range of 50-90 mi, with either 66 chargers per square mile, rated at 11 kW or 44 chargers per square mile, rated at 22 kW. We estimate that the cost of service provided by such an SAEV fleet will be $0.29-$0.61 per revenue mile, an order of magnitude lower than the cost of service of present-day Manhattan taxis and $0.05-$0.08/mi lower than that of an automated fleet composed of any currently available hybrid or internal combustion engine vehicle (ICEV). We estimate that such an SAEV fleet drawing power from the current NYC power grid would reduce GHG emissions by 73% and energy consumption by 58% compared to an automated fleet of ICEVs.

A rapid and low-cost DNA extraction method for isolating ...

African Journals Online (AJOL)

user

2011-02-21

Feb 21, 2011 ... Available online at http://www.academicjournals.org/AJB ... α-casein, produces PCR ready DNA at a fraction of the cost of commercial DNA extraction kits. Key words: DNA .... This experiment was performed to evaluate the efficiency of the ..... Zoetendal EG, Ben-Amor K, Akkermans AD, Abee T, De Vos WM.

Comparison of the actual costs during removal of concrete layer by high-speed water jets

Czech Academy of Sciences Publication Activity Database

Hela, R.; Bodnárová, L.; Novotný, M.; Sitek, Libor; Klich, Jiří; Wolf, I.; Foldyna, Josef

2012-01-01

Roč. 13, č. 4 (2012), s. 763-775 ISSN 1611-1699 R&D Projects: GA MŠk ED2.1.00/03.0082 Grant - others:GA TA ČR(CZ) TA01010948; GA MPO(CZ) FR-TI1/387 Institutional support: RVO:68145535 Keywords : computation model * total technological costs * total fixed costs * total variable costs * Triple helix model Subject RIV: JQ - Machines ; Tools Impact factor: 1.881, year: 2012 http://www.tandfonline.com/doi/pdf/10.3846/16111699.2011.645866

LHCb: Evidence of CP violation in charmless three-body decays $B^\\pm\\rightarrow K^\\pm\\pi^+\\pi^-$, $B^\\pm\\rightarrow K^\\pm K^+K^-$, $B^\\pm\\rightarrow K^+ K^-\\pi^\\pm$ and $B^\\pm\\rightarrow \\pi^\\pm\\pi^+\\pi^-$

CERN Multimedia

Lopes, J H

2013-01-01

Evidence of CP violation in charmless three-body decays $B^\\pm\\rightarrow K^\\pm\\pi^+\\pi^-$, $B^\\pm\\rightarrow K^\\pm K^+K^-$, $B^\\pm\\rightarrow K^+ K^-\\pi^\\pm$ and $B^\\pm\\rightarrow \\pi^\\pm\\pi^+\\pi^-$

Optimization of a truck-drone in tandem delivery network using k-means and genetic algorithm

Energy Technology Data Exchange (ETDEWEB)

Ferrandez, S. M.; Harbison, T.; Weber, T.; Sturges, R.; Rich, R.

2016-07-01

The purpose of this paper is to investigate the effectiveness of implementing unmanned aerial delivery vehicles in delivery networks. We investigate the notion of the reduced overall delivery time, energy, and costs for a truck-drone network by comparing the in-tandem system with a stand-alone delivery effort. The objectives are (1) to investigate the time, energy, and costs associated to a truck-drone delivery network compared to standalone truck or drone, (2) to propose an optimization algorithm that determines the optimal number of launch sites and locations given delivery requirements, and drones per truck, (3) to develop mathematical formulations for closed form estimations for the optimal number of launch locations, optimal total time, as well as the associated cost for the system. The design of the algorithm herein computes the minimal time of delivery utilizing K-means clustering to find launch locations, as well as a genetic algorithm to solve the truck route as a traveling salesmen problem (TSP). The optimal solution is determined by finding the minimum cost associated to the parabolic convex cost function. The optimal min-cost is determined by finding the most efficient launch locations using K-means algorithms to determine launch locations and a genetic algorithm to determine truck route between those launch locations. Results show improvements with in-tandem delivery efforts as opposed to standalone systems. Further, multiple drones per truck are more optimal and contribute to savings in both energy and time. For this, we sampled various initialization variables to derive closed form mathematical solutions for the problem. Ultimately, this provides the necessary analysis of an integrated truck-drone delivery system which could be implemented by a company in order to maximize deliveries while minimizing time and energy. Closed-form mathematical solutions can be used as close estimators for final costs and time. (Author)

A Study of the Impact of the Lack of a Cost Accounting Standards Board.

Science.gov (United States)

1987-06-01

California 00 ,: SE P 9 7 THESIS SE& A STUDY OF THE IMPACT OF THE LACK OF A COST ACCOUNTING STANDARDS BOARD by James F. Sumner, III June 1987 Thesis...O’ATON COSA1. CODES 16 SuB,*CT j’J.45 Comr~nue n- p.ono ol neeeterV ani denltiy by flO(k f1LrmbCr) E,) ROUP StA IRucost accounting , cost accounting ...thesis has two purposes. First, it attempts to determine whether the absence of the Cost Accounting Standards Board (CASB) has given rise to any areas

Impact of Financing Instruments and Strategies on the Wind Power Production Costs: A Case of Lithuania

Science.gov (United States)

Bobinaite, V.; Konstantinaviciute, I.

2018-04-01

The paper aims at demonstrating the relevance of financing instruments, their terms and financing strategies in relation to the cost of wind power production and the ability of wind power plant (PP) to participate in the electricity market in Lithuania. The extended approach to the Levelized Cost of Energy (LCOE) is applied. The feature of the extended approach lies in considering the lifetime cost and revenue received from the support measures. The research results have substantiated the relevance of financing instruments, their terms and strategies in relation to their impact on the LCOE and competitiveness of wind PP. It has been found that financing of wind PP through the traditional financing instruments (simple shares and bank loans) makes use of venture capital and bonds coming even in the absence of any support. It has been estimated that strategies consisting of different proportions of hard and soft loans, bonds, own and venture capital result in the average LCOE of 5.1-5.7 EURct/kWh (2000 kW), when the expected electricity selling price is 5.4 EURct/kWh. The financing strategies with higher shares of equity could impact by around 6 % higher LCOE compared to the strategies encompassing higher shares of debt. However, seeking to motivate venture capitalists, bond holders or other new financiers entering the wind power sector, support measures (feed-in tariff or investment subsidy) are relevant in case of 250 kW wind PP. It has been estimated that under the unsupported financing strategies, the average LCOE of 250 kW wind PP will be 7.8-8.8 EURct/kWh, but it will reduce by around 50 % if feed-in tariff or 50 % investment subsidy is applied.

Levelized Costs for Nuclear, Gas and Coal for Electricity, under the Mexican Scenario

Energy Technology Data Exchange (ETDEWEB)

Palacios, J.C.; Alonso, G.; Ramirez, R.; Gomez, A.; Ortiz, J.; Longoria, L.C.

2004-10-06

In the case of new nuclear power stations, it is necessary to pay special attention to the financial strategy that will be applied, time of construction, investment cost, and the discount and return rate. The levelized cost quantifies the unitary cost of the electricity (the kWh) generated during the lifetime of the nuclear power plant; and allows the immediate comparison with the cost of other alternative technologies. The present paper shows levelized cost for different nuclear technologies and it provides comparison among them as well as with gas and coal electricity plants. For the calculations we applied our own methodology to evaluate the levelized cost considering investment, fuel and operation and maintenance costs, making assumptions for the Mexican market, and taking into account the gas prices projections. The study also shows comparisons using different discount rates (5% and 10%), and some comparisons between our results and an OECD 1998 study. The results are i n good agreement and shows that nuclear option is cost competitive in Mexico on the basis of levelized costs.

Levelized Costs for Nuclear, Gas and Coal for Electricity, under the Mexican Scenario

International Nuclear Information System (INIS)

Palacios, J.C.; Alonso, G.; Ramirez, R.; Gomez, A.; Ortiz, J.; Longoria, L.C.

2004-01-01

In the case of new nuclear power stations, it is necessary to pay special attention to the financial strategy that will be applied, time of construction, investment cost, and the discount and return rate. The levelized cost quantifies the unitary cost of the electricity (the kWh) generated during the lifetime of the nuclear power plant; and allows the immediate comparison with the cost of other alternative technologies. The present paper shows levelized cost for different nuclear technologies and it provides comparison among them as well as with gas and coal electricity plants. For the calculations we applied our own methodology to evaluate the levelized cost considering investment, fuel and operation and maintenance costs, making assumptions for the Mexican market, and taking into account the gas prices projections. The study also shows comparisons using different discount rates (5% and 10%), and some comparisons between our results and an OECD 1998 study. The results are i n good agreement and shows that nuclear option is cost competitive in Mexico on the basis of levelized costs

Design and evaluation of low-cost laminated wood composite blades for intermediate size wind turbines: Blade design, fabrication concept, and cost analysis

Science.gov (United States)

Lieblein, S.; Gaugeon, M.; Thomas, G.; Zueck, M.

1982-01-01

As part of a program to reduce wind turbine costs, an evaluation was conducted of a laminated wood composite blade for the Mod-OA 200 kW wind turbine. The effort included the design and fabrication concept for the blade, together with cost and load analyses. The blade structure is composed of laminated Douglas fir veneers for the primary spar and nose sections, and honeycomb cored plywood panels for the trailing edges sections. The attachment of the wood blade to the rotor hub was through load takeoff studs bonded into the blade root. Tests were conducted on specimens of the key structural components to verify the feasibility of the concept. It is concluded that the proposed wood composite blade design and fabrication concept is suitable for Mod-OA size turbines (125-ft diameter rotor) at a cost that is very competitive with other methods of manufacture.

Observation of $B^0 \\to \\bar{D}^0 K^+ K^-$ and evidence of $B^0_s \\to \\bar{D}^0 K^+ K^-$

CERN Document Server

INSPIRE-00258707; Abellan Beteta, C; Adametz, A; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amhis, Y; Anderlini, L; Anderson, J; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Baesso, C; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, C; Bauer, Th; Bay, A; Beddow, J; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Corti, G; Couturier, B; Cowan, G A; Craik, D; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Paula, L; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Del Buono, L; Deplano, C; Derkach, D; Deschamps, O; Dettori, F; Dickens, J; Dijkstra, H; Diniz Batista, P; Domingo Bonal, F; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisele, F; Eisenhardt, S; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Elsby, D; Esperante Pereira, D; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garnier, J-C; Garofoli, J; Garra Tico, J; Garrido, L; Gascon, D; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Harrison, P F; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Hill, D; Hoballah, M; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Huston, R S; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jahjah Hussein, M; Jans, E; Jansen, F; Jaton, P; Jean-Marie, B; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Keaveney, J; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kim, Y M; Knecht, M; Kochebina, O; Komarov, I; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Lesiak, T; Li, L; Li, Y; Li Gioi, L; Lieng, M; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Luisier, J; Mac Raighne, A; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Magnin, J; Malde, S; Mamunur, R M D; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Massafferri, A; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Mazurov, A; McCarthy, J; McGregor, G; McNulty, R; Meissner, M; Merk, M; Merkel, J; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Mylroie-Smith, J; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neufeld, N; Nguyen, A D; Nguyen-Mau, C; Nicol, M; Niess, V; Nikitin, N; Nikodem, T; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pie Valls, B; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Romero Vidal, A; Rosello, M; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santinelli, R; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schindler, H; Schleich, S; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Smith, M; Sobczak, K; Soler, F J P; Solomin, A; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tsaregorodtsev, A; Tuning, N; Ubeda Garcia, M; Ukleja, A; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Videau, I; Vieira, D; Vilasis-Cardona, X; Visniakov, J; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhong, L; Zvyagin, A

2012-01-01

The first observation of the decay $B^{0} \\to \\overline{D}^{0}K^{+}K^{-}$ is reported from an analysis of $0.62 \\ \\mathrm{fb}^{-1}$ of $pp$ collision data collected with the LHCb detector. Its branching fraction is measured relative to that of the topologically similar decay $B^{0} \\to \\overline{D}^{0}\\pi^{+}\\pi^{-}$ to be $\\frac{ {\\cal B}\\left(B^{0} \\to \\overline{D}^{0}K^{+}K^{-}\\right)}{ {\\cal B}\\left(B^{0} \\to \\overline{D}^{0}\\pi^{+}\\pi^{-}\\right)} = 0.056 \\pm 0.011 \\pm 0.007$, where the first uncertainty is statistical and the second is systematic. The significance of the signal is $5.8\\,\\sigma$. Evidence, with $3.8\\,\\sigma$ significance, for $B^{0}_{s} \\to \\overline{D}^{0}K^{+}K^{-}$ decays is also presented. The relative branching fraction is measured to be $\\frac{ {\\cal B}\\left(B^{0}_{s} \\to \\overline{D}^{0}K^{+}K^{-}\\right)}{ {\\cal B}\\left(B^{0} \\to \\overline{D}^{0}K^{+}K^{-}\\right)} = 0.90 \\pm 0.27 \\pm 0.20$. These channels are of interest to study the mechanisms behind hadronic B decays, and ope...

Utilization of municipal wastewater for cooling in thermoelectric power plants: Evaluation of the combined cost of makeup water treatment and increased condenser fouling

Energy Technology Data Exchange (ETDEWEB)

Walker, Michael E. [Illinois Inst. of Technology, Chicago, IL (United States). Dept. of Chemical and Biological Engineering; Theregowda, Ranjani B. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept of Civil and Mechanical Engineering; Safari, Iman [Illinois Inst. of Technology, Chicago, IL (United States). Dept. of Chemical and Biological Engineering; Abbasian, Javad [Illinois Inst. of Technology, Chicago, IL (United States). Dept. of Chemical and Biological Engineering; Arastoopour, Hamid [Illinois Inst. of Technology, Chicago, IL (United States). Dept. of Chemical and Biological Engineering; Dzombak, David A. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept of Civil and Mechanical Engineering; Hsieh, Ming-Kai [Tamkang Univ., Taipei (Taiwan). Waer Resources Management and Policy Research Center; Miller, David C. [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

2013-10-01

A methodology is presented to calculate the total combined cost (TCC) of water sourcing, water treatment and condenser fouling in the recirculating cooling systems of thermoelectric power plants. The methodology is employed to evaluate the economic viability of using treated municipal wastewater (MWW) to replace the use of freshwater as makeup water to power plant cooling systems. Cost analyses are presented for a reference power plant and five different tertiary treatment scenarios to reduce the scaling tendencies of MWW. Results indicate that a 550 MW sub-critical coal fired power plant with a makeup water requirement of 29.3 ML/day has a TCC of $3.0 - 3.2 million/yr associated with the use of treated MWW for cooling. (All costs USD 2009). This translates to a freshwater conservation cost of $0.29/kL, which is considerably lower than that of dry air cooling technology, $1.5/kL, as well as the 2020 conservation cost target set by the U.S. Department of Energy, $0.74/kL. Results also show that if the available price of freshwater exceeds that of secondary-treated MWW by more than $0.13-0.14/kL, it can be economically advantageous to purchase secondary MWW and treat it for utilization in the recirculating cooling system of a thermoelectric power plant.

Cytotoxic activity of vitamins K1, K2 and K3 against human oral tumor cell lines.

Science.gov (United States)

Okayasu, H; Ishihara, M; Satoh, K; Sakagami, H

2001-01-01

Vitamin K1, K2 and K3 were compared for their cytotoxic activity, radical generation and O2- scavenging activity. Among these compounds, vitamin K3 showed the highest cytotoxic activity against human oral tumor cell lines (HSC-2, HSG), human promyelocytic leukemic cell line (HL-60) and human gingival fibroblast (HGF). Vitamin K3 induced internucleosomal DNA fragmentation in HL-60 cells, but not in HSC-2 or HSG cells. The cytotoxic activity of vitamins K2 and K1 was one and two orders lower, respectively, than K3. Vitamin K2, but not vitamin K3, showed tumor-specific cytotoxic action. ESR spectroscopy showed that only vitamin K3 produced radical(s) under alkaline condition and most potently enhanced the radical intensity of sodium ascorbate and scavenged O2- (generated by hypoxanthine-xanthine oxidase reaction system); vitamin K2 was much less active whereas vitamin K1 was inactive. These data suggest that the cytotoxic activity of vitamin K3 is generated by radical-mediated oxidation mechanism and that this vitamin has two opposing actions (that is, antioxidant and prooxidant), depending on the experimental conditions.

Design approaches to achieve competitive LMFBR capital costs

International Nuclear Information System (INIS)

Arnold, W.H.; Ehrman, C.S.; Sharbaugh, J.E.; Young, W.H.

1982-01-01

Through analysis of the essential functional elements of an LMFBR, numerous ways were found to simplify system design, reduce the size of components and equipment, and eliminate some components and systems. The projected capital cost per net kW of this design is competitive with that of current PWRs. RandD programs and the construction and operation of CRBRP now are needed to prove out the features of this new design

EPRI 25kW high concentration photovoltaic integrated array concept and associated economics

International Nuclear Information System (INIS)

Gunn, J.A.; Dostalek, F.J.

1993-01-01

This paper describes a cost effective photovoltaic array design for the high concentration technology being developed by the Electric Power Research Institute for utility scale applications. The concept of an ''integrated array'' is to attach Fresnel lens parquets directly to the front of the tracker structure and PV panels directly to the back of the structure thereby eliminating redundant structural components. The concept also incorporates the maximum use of automated manufacturing techniques for all components thereby minimizing material waste, fabrication and assembly labor. This paper also describes the results of a first approach cost and economic study for the technology which shows the potential for levelized energy cost below $0.10/kWh for a 50 MW ac plant given a mature technology

Repair and maintenance costs of 4WD tractors and self propelled combine harvesters in Italy

Directory of Open Access Journals (Sweden)

Aldo Calcante

2013-09-01

Full Text Available Purchasing and maintaining tractors and operating machines are two of the most considerable costs of the agricultural sector, which includes farm equipment manufacturers, farm contractors and farms. In this context, repair and maintenance costs (R&M costs generally constitute 10-15% of the total costs related to agricultural equipment and tend to increase with the age of the equipment; hence, an important consideration in farm management is the optimal time for equipment replacement. Classical, R&M cost estimation models, calculated as a function of accumulated working hours, are usually developed by ASAE/ASABE for the United States operating conditions. However, R&M costs are strongly influenced by farming practices, operative conditions, crop and soil type, climatic conditions, etc. which can be specific for individual countries. In this study, R&M cost model parameters were recalculated for the current Italian situation. For this purpose, data related to the R&M costs of 100 4WD tractors with engine power ranging from 59 to 198 kW, and of 20 SP combine harvesters (10 straw walkers combines and 10 axial flow combines with engine power ranging from 159 to 368 kW working in Italy were collected. According to the model, which was obtained by interpolating the data through a two-parameter power function (proposed by ASAE/ASABE, the R&M cost incidence on the list price of Italian tractors at 12,000 working hours (estimated life of the machines was 48.6%, as compared with 43.2% calculated through the most recent U.S. model while, for self propelled combine harvesters, the R&M cost incidence at 3,000 working hours was 23.1 % as compared with 40.2% calculated through the same U.S. model.

Impact of improvements in HYLIFE-II on safety, performance and cost

International Nuclear Information System (INIS)

Hoffman, M.A.; Lee, Y.T.

1994-01-01

The HYLIFE-II conceptual design has evolved and improved continually over the past four years to its present form. This paper describes the latest FY93 versions, Reference Case H1-B (nominally 1 GWe output) and the Enhanced Case H2-B (nominally 2 GWe net output), which take advantage of improvements in the tritium management system to eliminate the intermediate loops and the intermediate heat exchangers (IHX's). The improvements in the heat transport system and the steam power plant are described and the resulting cost reductions are evaluated. The new estimated cost of electricity (in 1990 dollars) is 5.1 cents/kWh for Reference Case H1-B and 3.6 cents/kWh for the Enhanced Case H2-B. In order to make a more equitable comparison of HYLIFE-II with two recent IFE (inertial fusion energy) studies sponsored by the DOE, namely OSIRIS and PROMETHEUS, the authors have revised their design concept in many important ways. The overall reactor concept and an overview of the latest design is given by Moir, et al. This paper will focus on those changes which have impacted the heat transport and power conversion systems and the overall cost of electricity

On the Difference Equation xn+1=xnxn-k/(xn-k+1a+bxnxn-k

Directory of Open Access Journals (Sweden)

Stevo Stević

2012-01-01

Full Text Available We show that the difference equation xn+1=xnxn-k/xn-k+1(a+bxnxn-k,n∈ℕ0, where k∈ℕ, the parameters a, b and initial values x-i, i=0,k̅ are real numbers, can be solved in closed form considerably extending the results in the literature. By using obtained formulae, we investigate asymptotic behavior of well-defined solutions of the equation.

Food choices and diet costs: an economic analysis.

Science.gov (United States)

Drewnowski, Adam; Darmon, Nicole

2005-04-01

Obesity in the United States is a socioeconomic issue. It is related to limited social and economic resources and may be linked to disparities in access to healthy foods. Added sugars and added fats are far more affordable than are the recommended "healthful" diets based on lean meats, whole grains, and fresh vegetables and fruit. There is an inverse relationship between energy density of foods (kJ/g) and energy cost ($/MJ), such that energy-dense grains, fats, and sweets represent the lowest-cost dietary options to the consumer. Good taste, high convenience, and the low cost of energy-dense foods, in conjunction with large portions and low satiating power, may be the principal reasons for overeating and weight gain. Financial disparities in access to healthier diets may help explain why the highest rates of obesity and diabetes are found among minorities and the working poor. If so, then encouraging low-income households to consume more costly foods is not an effective strategy for public health. What is needed is a comprehensive policy approach that takes behavioral nutrition and the economics of food choice into account.

Low-Cost High-Concentration Photovoltaic Systems for Utility Power Generation

Energy Technology Data Exchange (ETDEWEB)

McConnell, R.; Garboushian, V.; Gordon, R.; Dutra, D.; Kinsey, G.; Geer, S.; Gomez, H.; Cameron, C.

2012-03-31

Under DOE's Technology Pathway Partnership (TPP) program, Amonix, Inc. developed a new generation of high-concentration photovoltaic systems using multijunction technology and established the manufacturing capacity needed to supply multi-megawatt power plants buing using the new Amonix 7700-series solar energy systems. For this effort, Amonix Collaborated with a variety of suppliers and partners to complete project tasks. Subcontractors included: Evonik/Cyro; Hitek; the National Renewable Energy Laboratory (NREL); Raytech; Spectrolab; UL; University of Nevada, Las Vegas; and TUV Rheinland PTL. The Amonix TPP tasks included: Task 1: Multijunction Cell Optimization for Field Operation, Task 2: Fresnel Lens R&D, Task 3: Cell Package Design & Production, Task 4: Standards Compliance and Reliability Testing, Task 5: Receiver Plate Production, Task 6: MegaModule Performance, Task 7: MegaModule Cost Reduction, Task 8: Factory Setup and MegaModule Production, Task 9: Tracker and Tracking Controller, Task 10: Installation and Balance of System (BOS), Task 11: Field Testing, and Task 12: Solar Advisor Modeling and Market Analysis. Amonix's TPP addressed nearly the complete PV value chain from epitaxial layer design and wafer processing through system design, manufacturing, deployment and O&M. Amonix has made progress toward achieving these reduced costs through the development of its 28%+ efficient MegaModule, reduced manufacturing and installation cost through design for manufacturing and assembly, automated manufacturing processes, and reduced O&M costs. Program highlights include: (1) Optimized multijunction cell and cell package design to improve performance by > 10%; (2) Updated lens design provided 7% increased performance and higher concentration; (3) 28.7% DC STC MegaModule efficiency achieved in Phase II exceeded Phase III performance goal; (4) New 16' focal length MegaModule achieved target materials and manufacturing cost reduction; (5) Designed and

K-East and K-West Reactors

Data.gov (United States)

Federal Laboratory Consortium — Hanford's "sister reactors", the K-East and the K-West Reactors, were built side-by-side in the early 1950's. The two reactors went operational within four months of...

Life-cycle cost analysis of adsorption cycles for desalination

KAUST Repository

Thu, Kyaw

2010-08-01

This paper presents the thermo-economic analysis of the adsorption desalination (AD) cycle that is driven by low-temperature waste heat from exhaust of industrial processes or renewable sources. The AD cycle uses an adsorbent such as the silica gel to desalt the sea or brackish water. Based on an experimental prototype AD plant, the life-cycle cost analysis of AD plants of assorted water production capacities has been simulated and these predictions are translated into unit cost of water production. Our results show that the specific energy consumption of the AD cycle is 1.38 kWh/m3 which is the lowest ever reported. For a plant capacity of 1000 m3/d, the AD cycle offers a unit cost of $0.457/m3 as compared to more than $0.9 for the average RO plants. Besides being cost-effective, the AD cycle is also environment-friendly as it emits less CO2 emission per m3 generated, typically 85% less, by comparison to an RO process. © 2010 Desalination Publications.

Effective lifetime measurements in the B-s(0) -> K+K-, B-0 -> K+pi(-) and B-s(0) -> pi K-+(-) decays

NARCIS (Netherlands)

Aaij, R.; Adeva, B.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Cartelle, P. Alvarez; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Anderson, J.; Andreassen, R.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Balagura, V.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Bauer, Th.; Bay, A.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Belogurov, S.; Belous, K.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Benson, S.; Benton, J.; Berezhnoy, A.; Bernet, R.; Bettler, M. -O.; Vanbeuzekom, M.; Bien, A.; Bifani, S.; Bird, T.; Bizzeti, A.; Bjornstad, P. M.; Blake, T.; Blanc, F.; Blouw, J.; Blusk, S.; Bocci, V.; Bondar, A.; Bondar, N.; Bonivento, W.; Borghi, S.; Borgia, A.; Borsato, M.; Bowcock, T. J. V.; Bowen, E.; Bozzi, C.; Brambach, T.; van den Brand, J.; Bressieux, J.; Brett, D.; Britsch, M.; Britton, T.; Brook, N. H.; Brown, H.; Bursche, A.; Busetto, G.; Buytaert, J.; Cadeddu, S.; Calabrese, R.; Calvi, M.; Gomez, M. Calvo; Camboni, A.; Campana, P.; Perez, D. Campora; Carbone, A.; Carboni, G.; Cardinale, R.; Cardini, A.; Carranza-Mejia, H.; Carson, L.; Akiba, K. Carvalho; Casse, G.; Cassina, L.; Garcia, L. Castillo; Cattaneo, M.; Cauet, Ch.; Cenci, R.; Charles, M.; Charpentier, Ph.; Cheung, S. -F.; Chiapolini, N.; Chrzaszcz, M.; Ciba, K.; Vidal, X. Cid; Ciezarek, G.; Clarke, P. E. L.; Clemencic, M.; Cliff, H. V.; Closier, J.; Coco, V.; Cogan, J.; Cogneras, E.; Collins, P.; Comerma-Montells, A.; Contu, A.; Cook, A.; Coombes, M.; Coquereau, S.; Corti, G.; Corvo, M.; Counts, I.; Couturier, B.; Cowan, G. A.; Craik, D. C.; Torres, M. Cruz; Cunliffe, S.; Currie, R.; D'Ambrosio, C.; Dalseno, J.; David, P.; David, P. N. Y.; Davis, A.; De Bruyn, K.; De Capua, S.; De Cian, M.; De Miranda, J. M.; De Paula, L.; De Silva, W.; De Simone, P.; Decamp, D.; Deckenhoff, M.; Del Buono, L.; Deleage, N.; Derkach, D.; Deschamps, O.; Dettori, F.; Di Canto, A.; Dijkstra, H.; Donleavy, S.; Dordei, F.; Dorigo, M.; Suarez, A. Dosil; Dossett, D.; Dovbnya, A.; Dupertuis, F.; Durante, P.; Dzhelyadin, R.; Dziurda, A.; Dzyuba, A.; Easo, S.; Egede, U.; Egorychev, V.; Eidelman, S.; Eisenhardt, S.; Eitschberger, U.; Ekelhof, R.; Eklund, L.; El Rifai, I.; Elsasser, Ch.; Esen, S.; Falabella, A.; Faerber, C.; Farinelli, C.; Farley, N.; Farry, S.; Fay, R. F.; Ferguson, D.; Albor, V. Fernandez; Rodrigues, F. Ferreira; Ferro-Luzzi, M.; Filippov, S.; Fiore, M.; Fiorini, M.; Firlej, M.; Fitzpatrick, C.; Fiutowski, T.; Fontana, M.; Fontanelli, F.; Forty, R.; Francisco, O.; Frank, M.; Frei, C.; Frosini, M.; Fu, J.; Furfaro, E.; Torreira, A. Gallas; Galli, D.; Gallorini, S.; Gambetta, S.; Gandelman, M.; Gandini, P.; Gao, Y.; Garofoli, J.; Tico, J. Garra; Garrido, L.; Gaspar, C.; Gauld, R.; Gavardi, L.; Geraci, A.; Gersabeck, E.; Gersabeck, M.; Gershon, T.; Ghez, Ph.; Gianelle, A.; Giani, S.; Gibson, V.; Giubega, L.; Gligorov, V. V.; Goebel, C.; Golubkov, D.; Golutvin, A.; Gomes, A.; Gordon, H.; Gotti, C.; Gaendara, M. Grabalosa; Diaz, R. Graciani; Cardoso, L. A. Granado; Graug, E.; Graziani, G.; Grecu, A.; Greening, E.; Gregson, S.; Griffith, P.; Grillo, L.; Gruenberg, O.; Gui, B.; Gushchin, E.; Guz, Yu.; Gys, T.; Hadjivasiliou, C.; Haefeli, G.; Haen, C.; Haines, S. C.; Hall, S.; Hamilton, B.; Hampson, T.; Han, X.; Hansmann-Menzemer, S.; Harnew, N.; Harnew, S. T.; Harrison, J.; Hartmann, T.; He, J.; Head, T.; Heijne, V.; Hennessy, K.; Henrard, P.; Henry, L.; Morata, J. A. Hernando; van Herwijnen, E.; Hess, M.; Hicheur, A.; Hill, D.; Hoballah, M.; Hombach, C.; Hulsbergen, W.; Hunt, P.; Hussain, N.; Hutchcroft, D.; Hynds, D.; Idzik, M.; Ilten, P.; Jacobsson, R.; Jaeger, A.; Jalocha, J.; Jans, E.; Jaton, P.; Jawahery, A.; Jing, F.; John, M.; Johnson, D.; Jones, C. R.; Joram, C.; Jost, B.; Jurik, N.; Kaballo, M.; Kandybei, S.; Kanso, W.; Karacson, M.; Karbach, T. M.; Kelsey, M.; Kenyon, I. R.; Ketel, T.; Khanji, B.; Khurewathanakul, C.; Klaver, S.; Kochebina, O.; Kolpin, M.; Komarov, I.; Koopman, R. F.; Koppenburg, P.; Korolev, M.; Kozlinskiy, A.; Kravchuk, L.; Kreplin, K.; Kreps, M.; Krocker, G.; Krokovny, P.; Kruse, F.; Kucharczyk, M.; Kudryavtsev, V.; Kurek, K.; Kvaratskheliya, T.; Lathi, V. N.; Lacarrere, D.; Lafferty, G.; Lai, A.; Lambert, D.; Lambert, R. W.; Lanciotti, E.; Lanfranchi, G.; Langenbruch, C.; Langhans, B.; Latham, T.; Lazzeroni, C.; Legac, R.; Vanleerdam, J.; Lees, J. -P.; Lefevre, R.; Leflat, A.; Lefranois, J.; Leo, S.; Leroy, O.; Lesiak, T.; Leverington, B.; Li, Y.; Liles, M.; Lindner, R.; Linn, C.; Lionetto, F.; Liu, B.; Liu, G.; Lohn, S.; Longstaff, I.; Lopes, J. H.; Lopez-March, N.; Lowdon, P.; Lu, H.; Lucchesi, D.; Luo, H.; Lupato, A.; Luppi, E.; Lupton, O.; Machefert, F.; Machikhiliyan, I. V.; Maciuc, F.; Maev, O.; Malde, S.; Manca, G.; Mancinelli, G.; Mapelli, A.; Maratas, J.; Marchand, J. F.; Marconi, U.; Benito, C. Marin; Marino, P.; Maerki, R.; Marks, J.; Martellotti, G.; Martens, A.; Martin Sanchez, A.; Martinelli, M.; Martinez Santos, D.; Martinez Vidal, F.; Tostes, D. Martins; Massafferri, A.; Matev, R.; Mathe, Z.; Matteuzzi, C.; Mazurov, A.; McCann, M.; McCarthy, J.; Mcnab, A.; McNulty, R.; McSkelly, B.; Meadows, B.; Meier, F.; Meissner, M.; Merk, M.; Milanes, D. A.; Minard, M. -N.; Moggi, N.; Rodriguez, J. Molina; Monteil, S.; Moran, D.; Morandin, M.; Morawski, P.; Mord, A.; Morello, M. J.; Moron, J.; Mountain, R.; Muheim, F.; Mueller, K.; Muresan, R.; Mussini, M.; Muster, B.; Naik, P.; Nakada, T.; Nandakumar, R.; Nasteva, I.; Needham, M.; Neri, N.; Neubert, S.; Neufeld, N.; Neuner, M.; Nguyen, A. D.; Nguyen, T. D.; Nguyen-Mau, C.; Nicol, M.; Niess, V.; Niet, R.; Nikitin, N.; Nikodem, T.; Novoselov, A.; Oblakowska-Mucha, A.; Obraztsov, V.; Oggero, S.; Ogilvy, S.; Okhrimenko, O.; Oldeman, R.; Onderwater, G.; Orlandea, M.; Goicochea, J. M. Otalora; Owen, P.; Oyanguren, A.; Pal, B. K.; Palano, A.; Palombo, F.; Palutan, M.; Panman, J.; Papanestis, A.; Pappagallo, M.; Parkes, C.; Parkinson, C. J.; Passaleva, G.; Patel, G. D.; Patel, M.; Patrignani, C.; Alvarez, A. Pazos; Pearce, A.; Pellegrino, A.; Altarelli, M. Pepe; Perazzini, S.; Trigo, E. Perez; Perret, P.; Perrin-Terrin, M.; Pescatore, L.; Pesen, E.; Petridis, K.; Petrolini, A.; Olloqui, E. Picatoste; Pietrzyk, B.; Pilar, T.; Pinci, D.; Pistone, A.; Playfer, S.; Casasus, M. Plo; Polci, F.; Poluektov, A.; Polycarpo, E.; Popov, A.; Popov, D.; Popovici, B.; Potterat, C.; Powell, A.; Prisciandaro, J.; Pritchard, A.; Prouve, C.; Pugatch, V.; Navarro, A. Puig; Punzi, G.; Qian, W.; Rachwal, B.; Rademacker, J. H.; Rakotomiaramanana, B.; Rama, M.; Rangel, M. S.; Raniuk, I.; Rauschmayr, N.; Raven, G.; Reichert, S.; Reid, M. M.; dos Reis, A. C.; Ricciardi, S.; Richards, A.; Rihl, M.; Rinnert, K.; Molina, V. Rives; Romero, D. A. Roa; Robbe, P.; Rodrigues, A. B.; Rodrigues, E.; Perez, P. Rodriguez; Roiser, S.; Romanovsky, V.; Vidal, A. Romero; Rotondo, M.; Rouvinet, J.; Ruf, T.; Ruffini, F.; Ruiz, H.; Valls, P. Ruiz; Sabatino, G.; Silva, J. J. Saborido; Sagidova, N.; Sail, P.; Saitta, B.; Guimaraes, V. Salustino; Mayordomo, C. Sanchez; Sedes, B. Sanmartin; Santacesaria, R.; Rios, C. Santamarina; Santovetti, E.; Sapunov, M.; Sarti, A.; Satriano, C.; Satta, A.; Savrie, M.; Savrina, D.; Schiller, M.; Schindler, H.; Schlupp, M.; Schmelling, M.; Schmidt, B.; Schneider, O.; Schopper, A.; Schune, M. -H.; Schwemmer, R.; Sciascia, B.; Sciubba, A.; Seco, M.; Semennikov, A.; Senderowska, K.; Sepp, I.; Serra, N.; Serrano, J.; Sestini, L.; Seyfert, P.; Shapkin, M.; Shapoval, I.; Shcheglov, Y.; Shears, T.; Shekhtman, L.; Shevchenko, V.; Shires, A.; Coutinho, R. Silva; Simi, G.; Sirendi, M.; Skidmore, N.; Skwarnicki, T.; Smith, N. A.; Smith, E.; Smith, E.; Smith, J.; Smith, M.; Snoek, H.; Sokoloff, M. D.; Soler, F. J. P.; Soomro, F.; Souza, D.; Souza De Paula, B.; Spaan, B.; Sparkes, A.; Spradlin, P.; Stagni, F.; Stahl, S.; Steinkamp, O.; Stenyakin, O.; Stevenson, S.; Stoica, S.; Stone, S.; Storaci, B.; Stracka, S.; Straticiuc, M.; Straumann, U.; Stroili, R.; Subbiah, V. K.; Sun, L.; Sutcliffe, W.; Swientek, K.; Swientek, S.; Syropoulos, V.; Szczekowski, M.; Szczypka, P.; Szilard, D.; Szumlak, T.; T'Jampens, S.; Teklishyn, M.; Tellarini, G.; Teubert, F.; Thomas, C.; Thomas, E.; van Tilburg, J.; Tisserand, V.; Tobin, M.; Tolk, S.; Tomassetti, L.; Tonelli, D.; Topp-Joergensen, S.; Torr, N.; Tournefier, E.; Tourneur, S.; Tran, M. T.; Tresch, M.; Tsaregorodtsev, A.; Tsopelas, P.; Tuning, N.; Garcia, M. Ubeda; Ukleja, A.; Ustyuzhanin, A.; Uwer, U.; Vagnoni, V.; Valenti, G.; Vallier, A.; Gomez, R. Vazquez; Regueiro, P. Vazquez; Sierra, C. Vyzquez; Vecchi, S.; Velthuis, J. J.; Veltri, M.; Veneziano, G.; Vesterinen, M.; Viaud, B.; Vieira, D.; Diaz, M. Vieites; Vilasis-Cardona, X.; Vollhardt, A.; Volyanskyy, D.; Voong, D.; Vorobyev, A.; Vorobyev, V.; Voss, C.; Voss, H.; de Vries, J. A.; Waldi, R.; Wallace, C.; Wallace, R.; Walsh, J.; Wandernoth, S.; Wang, J.; Ward, D. R.; Watson, N. K.; Websdale, D.; Whitehead, M.; Wicht, J.; Wiedner, D.; Wilkinson, G.; Williams, M. P.; Williams, M.; Wilson, F. F.; Wimberley, J.; Wishahi, J.; Wislicki, W.; Witek, M.; Wormser, G.; Wotton, S. A.; Wright, S.; Wu, S.; Wyllie, K.; Xie, Y.; Xing, Z.; Xu, Z.; Yang, Z.; Yuan, X.; Yushchenko, O.; Zangoli, M.; Zavertyaev, M.; Zhang, F.; Zhang, L.; Zhang, W. C.; Zhang, Y.; Zhelezov, A.; Zhokhov, A.; Zhong, L.; Zvyagin, A.

2014-01-01

Measurements of the effective lifetimes in the B-s(0) -> K+K-, B-0 -> K+pi(-) and B-s(0) -> pi K-+(-) decays are presented using 1.0 fb(-1)of pp collision data collected at a centre-of-mass energy of 7 TeV by the LHCb experiment. The analysis uses a data-driven approach to correct for the decay time

Mass Production Cost Estimation For Direct H₂ PEM Fuel Cell Systesm for Automotive Applications. 2010 Update

Energy Technology Data Exchange (ETDEWEB)

James, Brian D. [Directed Technologies, Arlington, VA (United States); Kalinoski, Jeffrey A. [Directed Technologies, Arlington, VA (United States); Baum, Kevin N. [Directed Technologies, Arlington, VA (United States)

2010-09-30

This report is the fourth annual update of a comprehensive automotive fuel cell cost analysis. It contains estimates for material and manufacturing costs of complete 80 kWnet direct-hydrogen proton exchange membrane fuel cell systems suitable for powering light-duty automobiles.

Study on k-shortest paths with behavioral impedance domain from the intermodal public transportation system perspective

OpenAIRE

Pereira, Hernane Borges de Barros; Pérez Vidal, Lluís; Lozada, Eleazar G. Madrid

2003-01-01

Behavioral impedance domain consists of a theory on route planning for pedestrians, within which constraint management is considered. The goal of this paper is to present the k-shortest path model using the behavioral impedance approach. After the mathematical model building, optimization problem and resolution problem by a behavioral impedance algorithm, it is discussed how behavioral impedance cost function is embedded in the k-shortest path model. From the pedestrian's route planning persp...

Estimating the mental health costs of racial discrimination

Directory of Open Access Journals (Sweden)

Amanuel Elias

2016-11-01

Full Text Available Abstract Background Racial discrimination is a pervasive social problem in several advanced countries such as the U.S., U.K., and Australia. Public health research also indicates a range of associations between exposure to racial discrimination and negative health, particularly, mental health including depression, anxiety, and post-traumatic stress disorder (PTSD. However, the direct negative health impact of racial discrimination has not been costed so far although economists have previously estimated indirect non-health related productivity costs. In this study, we estimate the burden of disease due to exposure to racial discrimination and measure the cost of this exposure. Methods Using prevalence surveys and data on the association of racial discrimination with health outcomes from a global meta-analysis, we apply a cost of illness method to measure the impact of racial discrimination. This estimate indicates the direct health cost attributable to racial discrimination and we convert the estimates to monetary values based on conventional parameters. Results Racial discrimination costs the Australian economy 235,452 in disability adjusted life years lost, equivalent to $37.9 billion per annum, roughly 3.02% of annual gross domestic product (GDP over 2001–11, indicating a sizeable loss for the economy. Conclusion Substantial cost is incurred due to increased prevalence of racial discrimination as a result of its association with negative health outcomes (e.g. depression, anxiety and PTSD. This implies that potentially significant cost savings can be made through measures that target racial discrimination. Our research contributes to the debate on the social impact of racial discrimination, with implications for policies and efforts addressing it.

Dalitz plot analysis of eta(c) -> K+K-eta and eta(c) -> K+K-pi(0) in two-photon interactions

NARCIS (Netherlands)

Lees, J. P.; Poireau, V.; Tisserand, V.; Grauges, E.; Palano, A.; Eigen, G.; Stugu, B.; Brown, D. N.; Kerth, L. T.; Kolomensky, Yu. G.; Lynch, G.; Schroeder, T.; Hearty, C.; Mattison, T. S.; McKenna, J. A.; So, R. Y.; Khan, A.; Blinov, V. E.; Buzykaev, A. R.; Druzhinin, V. P.; Golubev, V. B.; Kravchenko, E. A.; Onuchin, A. P.; Serednyakov, S. I.; Skovpen, Yu. I.; Solodov, E. P.; Todyshev, K. Yu.; Lankford, A. J.; Mandelkern, M.; Dey, B.; Gary, J. W.; Long, O.; Campagnari, C.; Sevilla, M. Franco; Hong, T. M.; Kovalskyi, D.; Richman, J. D.; West, C. A.; Eisner, A. M.; Lockman, W. S.; Vazquez, W. Panduro; Schumm, B. A.; Seiden, A.; Chao, D. S.; Echenard, B.; Flood, K. T.; Hitlin, D. G.; Miyashita, T. S.; Ongmongkolkul, P.; Andreassen, R.; Huard, Z.; Meadows, B. T.; Pushpawela, B. G.; Sokoloff, M. D.; Sun, L.; Bloom, P. C.; Ford, W. T.; Gaz, A.; Smith, J. G.; Wagner, S. R.; Ayad, R.; Toki, W. H.; Spaan, B.; Bernard, D.; Verderi, M.; Playfer, S.; Bettoni, D.; Bozzi, C.; Calabrese, R.; Cibinetto, G.; Fioravanti, E.; Garzia, I.; Luppi, E.; Piemontese, L.; Santoro, V.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Martellotti, S.; Patteri, P.; Peruzzi, I. M.; Piccolo, M.; Rama, M.; Zallo, A.; Contri, R.; Lo Vetere, M.; Monge, M. R.; Passaggio, S.; Patrignani, C.; Robutti, E.; Bhuyan, B.; Prasad, V.; Morii, M.; Adametz, A.; Uwer, U.; Lacker, H. M.; Dauncey, P. D.; Mallik, U.; Cochran, J.; Prell, S.; Ahmed, H.; Gritsan, A. V.; Arnaud, N.; Davier, M.; Derkach, D.; Grosdidier, G.; Le Diberder, F.; Lutz, A. M.; Malaescu, B.; Roudeau, P.; Stocchi, A.; Wormser, G.; Lange, D. J.; Wright, D. M.; Coleman, J. P.; Fry, J. R.; Gabathuler, E.; Hutchcroft, D. E.; Payne, D. J.; Touramanis, C.; Bevan, A. J.; Di Lodovico, F.; Sacco, R.; Cowan, G.; Bougher, J.; Brown, D. N.; Davis, C. L.; Denig, A. G.; Fritsch, M.; Gradl, W.; Griessinger, K.; Hafner, A.; Prencipe, E.; Schubert, K. R.; Barlow, R. J.; Lafferty, G. D.; Cenci, R.; Hamilton, B.; Jawahery, A.; Roberts, D. A.; Cowan, R.; Sciolla, G.; Cheaib, R.; Patel, P. M.; Robertson, S. H.; Neri, N.; Palombo, F.; Cremaldi, L.; Godang, R.; Sonnek, P.; Summers, D. J.; Simard, M.; Taras, P.; De Nardo, G.; Onorato, G.; Sciacca, C.; Martinelli, M.; Raven, G.; Jessop, C. P.; LoSecco, J. M.; Honscheid, K.; Kass, R.; Feltresi, E.; Margoni, M.; Morandin, M.; Posocco, M.; Rotondo, M.; Simi, G.; Simonetto, F.; Stroili, R.; Akar, S.; Ben-Haim, E.; Bomben, M.; Bonneaud, G. R.; Briand, H.; Calderini, G.; Chauveau, J.; Leruste, Ph.; Marchiori, G.; Ocariz, J.; Biasini, M.; Manoni, E.; Pacetti, S.; Rossi, A.; Angelini, C.; Batignani, G.; Bettarini, S.; Carpinelli, M.; Casarosa, G.; Cervelli, A.; Chrzaszcz, M.; Forti, F.; Giorgi, M. A.; Lusiani, A.; Oberhof, B.; Paoloni, E.; Perez, A.; Rizzo, G.; Walsh, J. J.; Pegna, D. Lopes; Olsen, J.; Smith, A. J. S.; Faccini, R.; Ferrarotto, F.; Ferroni, F.; Gaspero, M.; Li Gioi, L.; Piredda, G.; Buenger, C.; Dittrich, S.; Gruenberg, O.; Hess, M.; Leddig, T.; Voss, C.; Waldi, R.; Adye, T.; Olaiya, E. O.; Wilson, F. F.; Emery, S.; Vasseur, G.; Anulli, F.; Aston, D.; Bard, D. J.; Cartaro, C.; Convery, M. R.; Dorfan, J.; Dubois-Felsmann, G. P.; Dunwoodie, W.; Ebert, M.; Field, R. C.; Fulsom, B. G.; Graham, M. T.; Hast, C.; Innes, W. R.; Kim, P.; Leith, D. W. G. S.; Lewis, P.; Lindemann, D.; Luitz, S.; Luth, V.; Lynch, H. L.; MacFarlane, D. B.; Muller, D. R.; Neal, H.; Perl, M.; Pulliam, T.; Ratcliff, B. N.; Roodman, A.; Salnikov, A. A.; Schindler, R. H.; Snyder, A.; Su, D.; Sullivan, M. K.; Va'vra, J.; Wisniewski, W. J.; Wulsin, H. W.; Purohit, M. V.; White, R. M.; Wilson, J. R.; Randle-Conde, A.; Sekula, S. J.; Bellis, M.; Burchat, P. R.; Puccio, E. M. T.; Alam, M. S.; Ernst, J. A.; Gorodeisky, R.; Guttman, N.; Peimer, D. R.; Soffer, A.; Spanier, S. M.; Ritchie, J. L.; Ruland, A. M.; Schwitters, R. F.; Wray, B. C.; Izen, J. M.; Lou, X. C.; Bianchi, F.; De Mori, F.; Filippi, A.; Gamba, D.; Lanceri, L.; Vitale, L.; Martinez-Vidal, F.; Oyanguren, A.; Villanueva-Perez, P.; Albert, J.; Banerjee, Sw.; Beaulieu, A.; Bernlochner, F. U.; Choi, H. H. F.; Kowalewski, R.; Lewczuk, M. J.; Lueck, T.; Nugent, I. M.; Roney, J. M.; Sobie, R. J.; Tasneem, N.; Gershon, T. J.; Harrison, P. F.; Latham, T. E.; Band, H. R.; Dasu, S.; Pan, Y.; Prepost, R.

2014-01-01

We study the processes γγ→K+K−η and γγ→K+K−π0 using a data sample of 519  fb−1 recorded with the BABAR detector operating at the SLAC PEP-II asymmetric-energy e+e− collider at center-of-mass energies at and near the Υ(nS) (n=2,3,4) resonances. We observe ηc→K+K−π0 and ηc→K+K−η decays, measure their

The capital investment and electricity cost of 2 x 600 MW PWR nuclear power plant in China

International Nuclear Information System (INIS)

Li Zhihua; Xing Leiming

1990-01-01

The capital investment and electricity cost of 2 x 600 MW PWR nuclear power plant in China are studied. If the rate of interest R 1 and of escalation R 2 are 7.2% and 10.0% respectively for RMB and the rate of interest R 1 and of escalation R 2 are 6.5% and 2.0% respectively for MK, the total investment is 9270 M RMB Yuan, the Specific investment is 7320 RMB Yuan/kW, the average selling electricity cost is 0.16 RMB Yuan/(kW·h). If the selling electricity price is 0.24 RMB Yuan/(kW·h), the rate of inner return is 7.7%, the dynamic return period is 13 years, the national income is 15800 M RMB Yuan, the profit of nuclear power plant after taxation is 6800 M RMB Yuan

Gas recombination device design and cost study. Final report

Energy Technology Data Exchange (ETDEWEB)

1980-07-01

Under a contract with Argonne National Laboratory, VARTA Batterie AG. conducted a design and cost study of hydrogen-oxygen recombination devices (HORD) for use with utility load-leveling lead-acid cells. Design specifications for the devices, through extensive calculation of the heat-flow conditions of the unit, were developed. Catalyst and condenser surface areas were specified. The exact dimensions can, however, be adjusted to the cell dimension and the space available above the cell. Design specifications were also developed for additional components required to ensure proper function of the recombination device, including metal hydride compound decomposer, aerosol retainer, and gas storage component. Costs for HORD were estimated to range from $4 to $10/kWh cell capacity for the production of a large number of units (greater than or equal to 10,000 units). The cost is a function of cell size and positive grid design. 21 figures, 2 tables.

International bioenergy transport costs and energy balance

International Nuclear Information System (INIS)

Hamelinck, Carlo N.; Suurs, Roald A.A.; Faaij, Andre P.C.

2005-01-01

To supply biomass from production areas to energy importing regions, long-distance international transport is necessary, implying additional logistics, costs, energy consumption and material losses compared to local utilisation. A broad variety of bioenergy chains can be envisioned, comprising different biomass feedstock production systems, pre-treatment and conversion operations, and transport of raw and refined solid biomass and liquid bio-derived fuels. A tool was developed to consistently compare the possible bioenergy supply chains and assess the influence of key parameters, such as distance, timing and scale on performance. Chains of European and Latin American bioenergy carriers delivered to Western Europe were analysed using generic data. European biomass residues and crops can be delivered at 90 and 70 euros/tonne dry (4.7 and 3.7 euros/GJ HHV ) when shipped as pellets. South American crops are produced against much lower costs. Despite the long shipping distance, the costs in the receiving harbour can be as low as 40 euros/tonne dry or 2.1 euros/GJ HHV ; the crop's costs account for 25-40% of the delivered costs. The relatively expensive truck transport from production site to gathering point restricts the size of the production area; therefore, a high biomass yield per hectare is vital to enable large-scale systems. In all, 300 MW HHV Latin American biomass in biomass integrated gasification/combined cycle plants may result in cost of electricity as little as 3.5 euros cent/kWh, competitive with fossil electricity. Methanol produced in Latin America and delivered to Europe may cost 8-10 euros/GJ HHV , when the pellets to methanol conversion is done in Europe the delivered methanol costs are higher. The energy requirement to deliver solid biomass from both crops and residues from the different production countries is 1.2-1.3 MJ primary /MJ delivered (coal ∼ 1.1 MJ/MJ). International bioenergy trade is possible against low costs and modest energy loss

Measurement of $CP$ observables in $B^0\\to D K^{*0}$ with $D\\to K^+K^-$

CERN Document Server

Aaij, R; Adametz, A; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amhis, Y; Anderlini, L; Anderson, J; Andreassen, R; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Baesso, C; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, Th; Bay, A; Beddow, J; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M-O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bowen, E; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carranza-Mejia, H; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Corti, G; Couturier, B; Cowan, G A; Craik, D; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Paula, L; De Silva, W; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Del Buono, L; Deplano, C; Derkach, D; Deschamps, O; Dettori, F; Di Canto, A; Dickens, J; Dijkstra, H; Diniz Batista, P; Dogaru, M; Domingo Bonal, F; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisenhardt, S; Eitschberger, U; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Elsby, D; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Ferguson, D; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Furfaro, E; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garofoli, J; Garosi, P; Garra Tico, J; Garrido, L; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Harrison, P F; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Hill, D; Hoballah, M; Hombach, C; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jans, E; Jansen, F; Jaton, P; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kochebina, O; Komarov, I; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J-P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Li, Y; Li Gioi, L; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Luisier, J; Luo, H; Mac Raighne, A; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Malde, S; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Martins Tostes, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Mazurov, A; McCarthy, J; McNulty, R; Meadows, B; Meier, F; Meissner, M; Merk, M; Milanes, D A; Minard, M-N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neufeld, N; Nguyen, A D; Nguyen, T D; Nguyen-Mau, C; Nicol, M; Niess, V; Niet, R; Nikitin, N; Nikodem, T; Nisar, S; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petridis, K; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Rives Molina, V; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Romero Vidal, A; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schindler, H; Schleich, S; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M-H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Smith, M; Sobczak, K; Sokoloff, M D; Soler, F J P; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Syropoulos, V; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Tonelli, D; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tresch, M; Tsaregorodtsev, A; Tsopelas, P; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urner, D; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Vieira, D; Vilasis-Cardona, X; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiechczynski, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhokhov, A; Zhong, L; Zvyagin, A

2013-01-01

The decay $B^0 \\to D K^{*0}$ and the charge conjugate mode are studied using 1.0${\\mathrm fb}^-1$ of $pp$ collision data collected by the LHCb experiment at $\\sqrt{s} = 7TeV$ in 2011. The CP asymmetry between the $B^0 \\to D K^{*0}$ and the $\\bar{B}^0 \\to D \\bar{K }^{*0}$ decay rates, with the neutral D meson in the CP-even final state $K^+K^-$, is found to be \\begin{equation*} {\\cal A}_d^{KK} = -0.45 \\pm 0.23 \\pm 0.02, \\end{equation*} where the first uncertainty is statistical and the second is systematic. In addition, favoured $B^0 \\to D K^{*0}$ decays are reconstructed with the $D$ meson in the non-$CP$ eigenstate $K^+ \\pi^-$. The ratio of the $B$-flavour averaged decay rates in $D$ decays to $CP$ and non-$CP$ eigenstates is measured to be \\begin{equation*} {\\cal R}_d^{KK} = 1.36\\,^{+0.37}_{ -0.32} \\pm 0.07, \\end{equation*} where the ratio of the branching fractions of $D^0 \\to K^- \\pi^+$ to $D^0 \\to K^+ K^-$ decays is included as multiplicative factor. The CP asymmetries measured with two contro...

Communication cost of entanglement transformations

International Nuclear Information System (INIS)

Hayden, Patrick; Winter, Andreas

2003-01-01

We study the amount of communication needed for two parties to transform some given joint pure state into another one, either exactly or with some fidelity. Specifically, we present a method to lower bound this communication cost even when the amount of entanglement does not increase. Moreover, the bound applies even if the initial state is supplemented with unlimited entanglement in the form of EPR (Einstein-Podolsky-Rosen) pairs and the communication is allowed to be quantum mechanical. We then apply the method to the determination of the communication cost of asymptotic entanglement concentration and dilution. While concentration is known to require no communication whatsoever, the best known protocol for dilution, discovered by H.-K. Lo and S. Popescu [Phys. Rev. Lett. 83, 1459 (1999)], requires exchange of a number of bits that is of the order of the square root of the number of EPR pairs. Here we prove a matching lower bound of the same asymptotic order, demonstrating the optimality of the Lo-Popescu protocol up to a constant factor and establishing the existence of a fundamental asymmetry between the concentration and dilution tasks. We also discuss states for which the minimal communication cost is proportional to their entanglement, such as the states recently introduced in the context of 'embezzling entanglement' (W. van Dam and P. Hayden, e-print quant-ph/0201041)

Correlation and flux tilt measurements of coupled-core reactor assemblies

International Nuclear Information System (INIS)

Harries, J.R.

1976-01-01

The systematics of coupling reactivity and time delay between cores have been investigated with a series of coupled-core assemblies on the AAEC Split-table Critical Facility. The assemblies were similar to the Universities' Training Reactor (UTR), but had graphite coupling region thickness of 450 mm, 600 mm and 800 mm. The coupling reactivity measured by both the cross-correlation of reactor noise and the flux tilt methods was stronger than for the UTRs, but showed a similar trend with core spacing. The cross-correlograms were analysed using the two-node model to derive the time delays between the cores. The time delays were compared with thermal neutron wave propagation, and found to be consistent when the time delays were added to the individual node response-function delays. (author)

Study of K. pi. scattering using the reactions K/sup + -/p. -->. K/sup + -/. pi. /sup +/n and K/sup + -/p. -->. K/sup + -/. pi. /sup -/. delta. /sup + +/ at 13 GeV/c

Energy Technology Data Exchange (ETDEWEB)

Estabrooks, P [McGill Univ., Montreal, Quebec (Canada); Carnegie, R K [Carleton Univ., Ottawa, Ontario (Canada); Martin, A D [Durham Univ. (UK); Dunwoodie, W M; Lasinski, T A; Leith, D W.G.S. [Stanford Linear Accelerator Center, Calif. (USA)

1978-02-27

An elastic K..pi.. partial-wave analysis is presented. It is based on high-statistics data for the reactions K/sup + -/p ..-->.. K/sup + -/..pi../sup +/n and K/sup + -/p ..-->.. K/sup + -/..pi../sup -/..delta../sup + +/ at 13 GeV obtained in a spectrometer experiment performed at SLAC. For each reaction, a t-dependent parametrization of the production amplitudes provides information on both the K..pi.. mass dependence of the production mechanisms and on K..pi.. scattering. Knowledge of the t-dependence then allows a calculation of the K..pi.. partial-wave amplitudes for K..pi.. masses from 0.7 to 1.9 GeV. The results of such analyses using data for (i) the neutral recoil reactions, (ii) the ..delta../sup + +/ recoil reactions, and (iii) both neutron and ..delta../sup + +/ recoil reactions simultaneously are presented.

Cost-benefit analysis of nZEB energy efficiency strategies with on-site photovoltaic generation

International Nuclear Information System (INIS)

Pikas, Ergo; Kurnitski, Jarek; Thalfeldt, Martin; Koskela, Lauri

2017-01-01

Many studies on the deployment of and investment in renewable energy (RE) technologies have focused on job creation associated with energy production at the macroeconomic level and across renewable energy technologies. We propose another perspective, the use of solar photovoltaic (PV) technology to attain a nearly zero-energy building (nZEB) class. The aim of this research is to investigate the costs and benefits for private and public entities when constructing nZEB or adopting nZEB policies. A quantitative research approach is taken when modelling required PV capacities, net present cash flows, subsidies, and job generation. Findings show that at current electricity tariffs and solar PV system capacities and production levels, single family houses, apartment buildings, and other building types require 0.044 €/kWh, 0.037 €/kWh, and 0.024 €/kWh, respectively, in government subsidies on energy sold back to the grid. Office buildings were profitable without the subsidy. In this study, we argue that investments in RE, specifically, PV technology, will bring in approximately 2.1 M€ of additional revenue to the Estonian government over a 20 years period as tax return overruns subsidies. However, nZEB investments are expected to become cost-optimal without subsidies, due to the increasing efficiency and decreasing costs of PV systems. - Highlights: • The paper provides a combination of approaches for PV cost-benefit analysis. • Investments in PV technology to obtain nZEB require government subsidies. • Work describes potential strategies for subsidizing or investing in PV technology. • Investments in PV technology benefit both private investors and public institutions.

Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2006-06-27

The authors present a search for the decay of a B{sup 0} or {bar B}{sup 0} meson to a {bar K}*{sup 0} K{sup 0} or K*{sup 0} {bar K}{sup 0} final state, using a sample of approximately 232 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric energy e{sup +}e{sup -} collider at SLAC. The measured branching fraction is {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) = (0.2{sub -0.8, -0.3}{sup +0.9, +0.1}) x 10{sup -6}. They obtain the following upper limit for the branching fraction at 90% confidence level: {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) < 1.9 x 10{sup -6}. They use our result to constrain the Standard Model prediction for the deviation of the CP asymmetry in B{sup 0} {yields} {phi}K{sup 0} from sin 2{beta}.

K0/K+ ratio in relativistic heavy-ion collisions

International Nuclear Information System (INIS)

Ivanov, Yu.B.; Russkikh, V.N.

1996-11-01

It is shown that ratio of production yields of K 0 and K + mesons in collisions of isotopically asymmetric nuclei at incident energies ∼ 1 GeV/nucleon is related directly enough to temperature of nuclear matter at the initial stage of the collision. Sensitivity of the K 0 /K + ratio to the temperature variation is analyzed. Ambiguities, associated with interpretation of this quantity as a probe of nuclear temperature, are discussed. It is argued that the K 0 /K + ratio is a fairly model-independent quantity, provided channels with Δ isobars dominate the kaon production. (orig.)

Evolutionary trees: an integer multicommodity max-flow-min-cut theorem

NARCIS (Netherlands)

Erdös, Péter L.; Szekely, László A.

1992-01-01

In biomathematics, the extensions of a leaf-colouration of a binary tree to the whole vertex set with minimum number of colour-changing edges are extensively studied. Our paper generalizes the problem for trees; algorithms and a Menger-type theorem are presented. The LP dual of the problem is a

Hanford general employee training: A million dollar cost-beneficial program

International Nuclear Information System (INIS)

Gardner, P.R.

1991-01-01

In January, 1990, Westinghouse Hanford Company (WHC) implemented an interactive videodisc training program entitled Hanford General Employee Training (HGET). Following an introduction by the course instructor, students begin the interactive video segment of the course by taking a tour of an office building. In fact, this tour is simply a setting in which to give the student a checkout on safety, security, and quality issues. For example, at one point the guide leaves the room and the phone suddenly begins a steady ring. This is a particular alarm at WHC, and the student is challenged to respond correctly. Missed questions flag corresponding tutorials to be delivered either immediately or on completion of the tour. Instructors receive notification of weakoesses left unremedied. Development costs for a sophisticated program such as HGET were high compared to similar costs for developing equivalent traditional training. Hardware and labor totaled $900K. Annual maintenance costs, equipment plus labor, appear to be running about $200K. On the benefit side, by consolidating some seventeen previous WHC courses and more effectively managing the instructional process, HGET reduced the average student training time from over eleven hours to just under four hours. In the development and implementation of HGET a number of issues were resolved, some more successfully than others: (1) what about job security for former instructors? (2) how should the course be run on a daily basis? (we envisioned a combination of instructor and videodisc); (3) how high will the maintenance costs be? (higher than projected); etc. Many obstacles arise, most in connection with the large number of groups and personnel whose efforts had to be coordinated

Costs and cost-effectiveness of periviable care.

Science.gov (United States)

Caughey, Aaron B; Burchfield, David J

2014-02-01

With increasing concerns regarding rapidly expanding healthcare costs, cost-effectiveness analysis allows assessment of whether marginal gains from new technology are worth the increased costs. Particular methodologic issues related to cost and cost-effectiveness analysis in the area of neonatal and periviable care include how costs are estimated, such as the use of charges and whether long-term costs are included; the challenges of measuring utilities; and whether to use a maternal, neonatal, or dual perspective in such analyses. A number of studies over the past three decades have examined the costs and the cost-effectiveness of neonatal and periviable care. Broadly, while neonatal care is costly, it is also cost effective as it produces both life-years and quality-adjusted life-years (QALYs). However, as the gestational age of the neonate decreases, the costs increase and the cost-effectiveness threshold is harder to achieve. In the periviable range of gestational age (22-24 weeks of gestation), whether the care is cost effective is questionable and is dependent on the perspective. Understanding the methodology and salient issues of cost-effectiveness analysis is critical for researchers, editors, and clinicians to accurately interpret results of the growing body of cost-effectiveness studies related to the care of periviable pregnancies and neonates. Copyright © 2014 Elsevier Inc. All rights reserved.

Recovery of carboxylic acids at pH greater than pK_a

Energy Technology Data Exchange (ETDEWEB)

Tung, Lisa A. [Univ. of California, Berkeley, CA (United States)

1993-08-01

Economics of producing carboxylic acids by fermentation is often dominated, not by the fermentation cost, but by the cost of recovering and purifying the acids from dilute aqueous solutions. Experiments were performed to measure uptakes of lactic and succinic acids as functions of pH by basic polymeric sorbents; sorbent regeneration was also tested. Performance at pH > pK_a and regenerability depend on sorbent basicity; apparent pK_a and monomer pK{sub a} can be used to predict sorbent performance. Two basic amine extractants, Alamine 336 and Amberlite LA-2, in were also studied; they are able to sustain capacity to higher pH in diluents that stabilize the acid-amine complex through H bonding. Secondary amines perform better than tert-amines in diluents that solvate the additional proton. Competitive sulfate and phosphate, an interference in fermentation, are taken up by sorbents more strongly than by extractants. The third step in the proposed fermentation process, the cracking of the trimethylammonium (TMA) carboxylate, was also examined. Because lactic acid is more soluble and tends to self-esterify, simple thermal cracking does not remove all TMA; a more promising approach is to esterify the TMA lactate by reaction with an alcohol.

An Insight Into the Two Costing Technique: Absorption Costing and Marginal Costing

Directory of Open Access Journals (Sweden)

Mariam Nawaz

2013-02-01

Full Text Available This paper will investigate the controversy that is innate between the two costing techniques; Absorption Costing and Marginal Costing and would throw light on which costing technique better serves its purpose in helping management for decision making process and if Marginal Costing technique is concluded as better technique then why it should not be used for external reporting purpose. This paper will only crystallize and highlight the issues descriptively and will not resolve the issues that are inherent between the two costing techniques. The unique thing about this paper is that it is in favor of treating fixed cost as product cost that is it is supporting the advocates of Absorption Costing Technique but it is against to consider profit as a function of production rather it believes that profit should only be considered as function of sales for stock valuation and to help management in decision making process that is, regarding this point it is supporting advocates of Marginal Costing.

Modeling Network Transition Constraints with Hypergraphs

DEFF Research Database (Denmark)

Harrod, Steven

2011-01-01

Discrete time dynamic graphs are frequently used to model multicommodity flows or activity paths through constrained resources, but simple graphs fail to capture the interaction effects of resource transitions. The resulting schedules are not operationally feasible, and return inflated objective...... values. A directed hypergraph formulation is derived to address railway network sequencing constraints, and an experimental problem sample solved to estimate the magnitude of objective inflation when interaction effects are ignored. The model is used to demonstrate the value of advance scheduling...... of train paths on a busy North American railway....

Measurement of $C\\!P$ violation in the phase space of $B^{\\pm} \\to K^{\\pm} \\pi^{+} \\pi^{-}$ and $B^{\\pm} \\to K^{\\pm} K^{+} K^{-}$ decays

CERN Document Server

INSPIRE-00258707; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amerio, S; Amhis, Y; Anderlini, L; Anderson, J; Andreassen, R; Andrews, J E; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Baalouch, M; Bachmann, S; Back, J J; Baesso, C; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bauer, Th; Bay, A; Beddow, J; Bedeschi, F; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blouw, J; Blusk, S; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bowen, E; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Burducea, I; Bursche, A; Busetto, G; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Campora Perez, D; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carranza-Mejia, H; Carson, L; Carvalho Akiba, K; Casse, G; Castillo Garcia, L; Cattaneo, M; Cauet, Ch; Cenci, R; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Coquereau, S; Corti, G; Couturier, B; Cowan, G A; Craik, D C; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; Davis, A; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Paula, L; De Silva, W; De Simone, P; Decamp, D; Deckenhoff, M; Del Buono, L; Déléage, N; Derkach, D; Deschamps, O; Dettori, F; Di Canto, A; Di Ruscio, F; Dijkstra, H; Dogaru, M; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisenhardt, S; Eitschberger, U; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Elsby, D; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Ferguson, D; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fiore, M; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Furfaro, E; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garofoli, J; Garosi, P; Garra Tico, J; Garrido, L; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Giubega, L; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Griffith, P; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hamilton, B; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Hartmann, T; He, J; Head, T; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicheur, A; Hicks, E; Hill, D; Hoballah, M; Holtrop, M; Hombach, C; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Hutchcroft, D; Hynds, D; Iakovenko, V; Idzik, M; Ilten, P; Jacobsson, R; Jaeger, A; Jans, E; Jaton, P; Jawahery, A; Jing, F; John, M; Johnson, D; Jones, C R; Joram, C; Jost, B; Kaballo, M; Kandybei, S; Kanso, W; Karacson, M; Karbach, T M; Kenyon, I R; Ketel, T; Keune, A; Khanji, B; Kochebina, O; Komarov, I; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leo, S; Leroy, O; Lesiak, T; Leverington, B; Li, Y; Li Gioi, L; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; Lohn, S; Longstaff, I; Lopes, J H; Lopez-March, N; Lu, H; Lucchesi, D; Luisier, J; Luo, H; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Malde, S; Manca, G; Mancinelli, G; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Martins Tostes, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Maurice, E; Mazurov, A; Mc Skelly, B; McCarthy, J; McNab, A; McNulty, R; Meadows, B; Meier, F; Meissner, M; Merk, M; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mordà, A; Morello, M J; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neubert, S; Neufeld, N; Nguyen, A D; Nguyen, T D; Nguyen-Mau, C; Nicol, M; Niess, V; Niet, R; Nikitin, N; Nikodem, T; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Oyanguren, A; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petridis, K; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, A; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pritchard, A; Prouve, C; Pugatch, V; Puig Navarro, A; Punzi, G; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Rives Molina, V; Roa Romero, D A; Robbe, P; Roberts, D A; Rodrigues, E; Rodriguez Perez, P; Roiser, S; Romanovsky, V; Romero Vidal, A; Rouvinet, J; Ruf, T; Ruffini, F; Ruiz, H; Ruiz Valls, P; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salustino Guimaraes, V; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schindler, H; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Sirendi, M; Skwarnicki, T; Smith, N A; Smith, E; Smith, J; Smith, M; Sokoloff, M D; Soler, F J P; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Sun, L; Swientek, S; Syropoulos, V; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Tonelli, D; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tresch, M; Tsaregorodtsev, A; Tsopelas, P; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urner, D; Ustyuzhanin, A; Uwer, U; Vagnoni, V; Valenti, G; Vallier, A; Van Dijk, M; Vazquez Gomez, R; Vazquez Regueiro, P; Vázquez Sierra, C; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Vieira, D; Vilasis-Cardona, X; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, C; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiechczynski, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wimberley, J; Wishahi, J; Witek, M; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhokhov, A; Zhong, L; Zvyagin, A

2013-01-01

The charmless decays $B^{\\pm}\\to K^{\\pm}\\pi^+\\pi^-$ and $B^{\\pm}\\to K^{\\pm}K^+K^-$ are reconstructed using data, corresponding to an integrated luminosity of 1.0 fb$^{-1}$, collected by LHCb in 2011. The inclusive charge asymmetries of these modes are measured as $A_{C\\!P}(B^{\\pm}\\to K^{\\pm}\\pi^+\\pi^-) = 0.032 \\pm 0.008 {\\mathrm{\\,(stat)}} \\pm 0.004 {\\mathrm{\\,(syst)}} \\pm 0.007 (J/\\psi K^{\\pm})$ and $A_{C\\!P}(B^{\\pm}\\to K^{\\pm}K^+K^-) = -0.043 \\pm 0.009 {\\mathrm{\\,(stat)}} \\pm 0.003 {\\mathrm{\\,(syst)}} \\pm 0.007 (J/\\psi K^{\\pm})$, where the third uncertainty is due to the $C\\!P$ asymmetry of the $B^{\\pm}\\to J/\\psi K^{\\pm}$ reference mode. The significance of $A_{C\\!P}(B^{\\pm}\\to K^{\\pm}K^+K^-)$ exceeds three standard deviations and is the first evidence of an inclusive $C\\!P$ asymmetry in charmless three-body $B$ decays. In addition to the inclusive $C\\!P$ asymmetries, larger asymmetries are observed in localised regions of phase space.

Search for the suppressed decays $B^{+}\\rightarrow K^{+}K^{+}\\pi^{-}$ and $B^{+}\\rightarrow \\pi^{+}\\pi^{+}K^{-}$

CERN Document Server

Aaij, Roel; Adinolfi, Marco; Ajaltouni, Ziad; Akar, Simon; Albrecht, Johannes; Alessio, Federico; Alexander, Michael; Ali, Suvayu; Alkhazov, Georgy; Alvarez Cartelle, Paula; Alves Jr, Antonio Augusto; Amato, Sandra; Amerio, Silvia; Amhis, Yasmine; An, Liupan; Anderlini, Lucio; Andreassi, Guido; Andreotti, Mirco; Andrews, Jason; Appleby, Robert; Aquines Gutierrez, Osvaldo; Archilli, Flavio; d'Argent, Philippe; Arnau Romeu, Joan; Artamonov, Alexander; Artuso, Marina; Aslanides, Elie; Auriemma, Giulio; Baalouch, Marouen; Babuschkin, Igor; Bachmann, Sebastian; Back, John; Badalov, Alexey; Baesso, Clarissa; Baldini, Wander; Barlow, Roger; Barschel, Colin; Barsuk, Sergey; Barter, William; Batozskaya, Varvara; Batsukh, Baasansuren; Battista, Vincenzo; Bay, Aurelio; Beaucourt, Leo; Beddow, John; Bedeschi, Franco; Bediaga, Ignacio; Bel, Lennaert; Bellee, Violaine; Belloli, Nicoletta; Belous, Konstantin; Belyaev, Ivan; Ben-Haim, Eli; Bencivenni, Giovanni; Benson, Sean; Benton, Jack; Berezhnoy, Alexander; Bernet, Roland; Bertolin, Alessandro; Betti, Federico; Bettler, Marc-Olivier; van Beuzekom, Martinus; Bezshyiko, Iaroslava; Bifani, Simone; Billoir, Pierre; Bird, Thomas; Birnkraut, Alex; Bitadze, Alexander; Bizzeti, Andrea; Blake, Thomas; Blanc, Frederic; Blouw, Johan; Blusk, Steven; Bocci, Valerio; Boettcher, Thomas; Bondar, Alexander; Bondar, Nikolay; Bonivento, Walter; Borgheresi, Alessio; Borghi, Silvia; Borisyak, Maxim; Borsato, Martino; Bossu, Francesco; Boubdir, Meriem; Bowcock, Themistocles; Bowen, Espen Eie; Bozzi, Concezio; Braun, Svende; Britsch, Markward; Britton, Thomas; Brodzicka, Jolanta; Buchanan, Emma; Burr, Christopher; Bursche, Albert; Buytaert, Jan; Cadeddu, Sandro; Calabrese, Roberto; Calvi, Marta; Calvo Gomez, Miriam; Camboni, Alessandro; Campana, Pierluigi; Campora Perez, Daniel; Campora Perez, Daniel Hugo; Capriotti, Lorenzo; Carbone, Angelo; Carboni, Giovanni; Cardinale, Roberta; Cardini, Alessandro; Carniti, Paolo; Carson, Laurence; Carvalho Akiba, Kazuyoshi; Casse, Gianluigi; Cassina, Lorenzo; Castillo Garcia, Lucia; Cattaneo, Marco; Cauet, Christophe; Cavallero, Giovanni; Cenci, Riccardo; Charles, Matthew; Charpentier, Philippe; Chatzikonstantinidis, Georgios; Chefdeville, Maximilien; Chen, Shanzhen; Cheung, Shu-Faye; Chobanova, Veronika; Chrzaszcz, Marcin; Cid Vidal, Xabier; Ciezarek, Gregory; Clarke, Peter; Clemencic, Marco; Cliff, Harry; Closier, Joel; Coco, Victor; Cogan, Julien; Cogneras, Eric; Cogoni, Violetta; Cojocariu, Lucian; Collazuol, Gianmaria; Collins, Paula; Comerma-Montells, Albert; Contu, Andrea; Cook, Andrew; Coquereau, Samuel; Corti, Gloria; Corvo, Marco; Costa Sobral, Cayo Mar; Couturier, Benjamin; Cowan, Greig; Craik, Daniel Charles; Crocombe, Andrew; Cruz Torres, Melissa Maria; Cunliffe, Samuel; Currie, Robert; D'Ambrosio, Carmelo; Dall'Occo, Elena; Dalseno, Jeremy; David, Pieter; Davis, Adam; De Aguiar Francisco, Oscar; De Bruyn, Kristof; De Capua, Stefano; De Cian, Michel; De Miranda, Jussara; De Paula, Leandro; De Serio, Marilisa; De Simone, Patrizia; Dean, Cameron Thomas; Decamp, Daniel; Deckenhoff, Mirko; Del Buono, Luigi; Demmer, Moritz; Derkach, Denis; Deschamps, Olivier; Dettori, Francesco; Dey, Biplab; Di Canto, Angelo; Dijkstra, Hans; Dordei, Francesca; Dorigo, Mirco; Dosil Su{á}rez, Alvaro; Dovbnya, Anatoliy; Dreimanis, Karlis; Dufour, Laurent; Dujany, Giulio; Dungs, Kevin; Durante, Paolo; Dzhelyadin, Rustem; Dziurda, Agnieszka; Dzyuba, Alexey; D{é}l{é}age, Nicolas; Easo, Sajan; Ebert, Marcus; Egede, Ulrik; Egorychev, Victor; Eidelman, Semen; Eisenhardt, Stephan; Eitschberger, Ulrich; Ekelhof, Robert; Eklund, Lars; Elsasser, Christian; Ely, Scott; Esen, Sevda; Evans, Hannah Mary; Evans, Timothy; Falabella, Antonio; Farley, Nathanael; Farry, Stephen; Fay, Robert; Fazzini, Davide; Ferguson, Dianne; Fernandez Albor, Victor; Fernandez Prieto, Antonio; Ferrari, Fabio; Ferreira Rodrigues, Fernando; Ferro-Luzzi, Massimiliano; Filippov, Sergey; Fini, Rosa Anna; Fiore, Marco; Fiorini, Massimiliano; Firlej, Miroslaw; Fitzpatrick, Conor; Fiutowski, Tomasz; Fleuret, Frederic; Fohl, Klaus; Fontana, Marianna; Fontanelli, Flavio; Forshaw, Dean Charles; Forty, Roger; Franco Lima, Vinicius; Frank, Markus; Frei, Christoph; Fu, Jinlin; Furfaro, Emiliano; F{ä}rber, Christian; Gallas Torreira, Abraham; Galli, Domenico; Gallorini, Stefano; Gambetta, Silvia; Gandelman, Miriam; Gandini, Paolo; Gao, Yuanning; Garcia Martin, Luis Miguel; Garc{í}a Pardi{ñ}as, Juli{á}n; Garra Tico, Jordi; Garrido, Lluis; Garsed, Philip John; Gascon, David; Gaspar, Clara; Gavardi, Laura; Gazzoni, Giulio; Gerick, David; Gersabeck, Evelina; Gersabeck, Marco; Gershon, Timothy; Ghez, Philippe; Gian{ì}, Sebastiana; Gibson, Valerie; Girard, Olivier G{ö}ran; Giubega, Lavinia-Helena; Gizdov, Konstantin; Gligorov, V.V.; Golubkov, Dmitry; Golutvin, Andrey; Gomes, Alvaro; Gorelov, Igor Vladimirovich; Gotti, Claudio; Grabalosa G{á}ndara, Marc; Graciani Diaz, Ricardo; Granado Cardoso, Luis Alberto; Graugés, Eugeni; Graverini, Elena; Graziani, Giacomo; Grecu, Alexandru; Griffith, Peter; Grillo, Lucia; Gruberg Cazon, Barak Raimond; Gr{ü}nberg, Oliver; Gushchin, Evgeny; Guz, Yury; Gys, Thierry; G{ö}bel, Carla; Hadavizadeh, Thomas; Hadjivasiliou, Christos; Haefeli, Guido; Haen, Christophe; Haines, Susan; Hall, Samuel; Hamilton, Brian; Han, Xiaoxue; Hansmann-Menzemer, Stephanie; Harnew, Neville; Harnew, Samuel; Harrison, Jonathan; Hatch, Mark; He, Jibo; Head, Timothy; Heister, Arno; Hennessy, Karol; Henrard, Pierre; Henry, Louis; Hernando Morata, Jose Angel; van Herwijnen, Eric; Heß, Miriam; Hicheur, Adl{è}ne; Hill, Donal; Hombach, Christoph; Hulsbergen, Wouter; Humair, Thibaud; Hushchyn, Mikhail; Hussain, Nazim; Hutchcroft, David; Idzik, Marek; Ilten, Philip; Jacobsson, Richard; Jaeger, Andreas; Jalocha, Pawel; Jans, Eddy; Jawahery, Abolhassan; John, Malcolm; Johnson, Daniel; Jones, Christopher; Joram, Christian; Jost, Beat; Jurik, Nathan; Kandybei, Sergii; Kanso, Walaa; Karacson, Matthias; Kariuki, James Mwangi; Karodia, Sarah; Kecke, Matthieu; Kelsey, Matthew; Kenyon, Ian; Kenzie, Matthew; Ketel, Tjeerd; Khairullin, Egor; Khanji, Basem; Khurewathanakul, Chitsanu; Kirn, Thomas; Klaver, Suzanne; Klimaszewski, Konrad; Koliiev, Serhii; Kolpin, Michael; Komarov, Ilya; Koopman, Rose; Koppenburg, Patrick; Kozachuk, Anastasiia; Kozeiha, Mohamad; Kravchuk, Leonid; Kreplin, Katharina; Kreps, Michal; Krokovny, Pavel; Kruse, Florian; Krzemien, Wojciech; Kucewicz, Wojciech; Kucharczyk, Marcin; Kudryavtsev, Vasily; Kuonen, Axel Kevin; Kurek, Krzysztof; Kvaratskheliya, Tengiz; Lacarrere, Daniel; Lafferty, George; Lai, Adriano; Lambert, Dean; Lanfranchi, Gaia; Langenbruch, Christoph; Langhans, Benedikt; Latham, Thomas; Lazzeroni, Cristina; Le Gac, Renaud; van Leerdam, Jeroen; Lees, Jean-Pierre; Leflat, Alexander; Lefran{ç}ois, Jacques; Lef{è}vre, Regis; Lemaitre, Florian; Lemos Cid, Edgar; Leroy, Olivier; Lesiak, Tadeusz; Leverington, Blake; Li, Yiming; Likhomanenko, Tatiana; Lindner, Rolf; Linn, Christian; Lionetto, Federica; Liu, Bo; Liu, Xuesong; Loh, David; Longstaff, Iain; Lopes, Jose; Lucchesi, Donatella; Lucio Martinez, Miriam; Luo, Haofei; Lupato, Anna; Luppi, Eleonora; Lupton, Oliver; Lusiani, Alberto; Lyu, Xiao-Rui; Machefert, Frederic; Maciuc, Florin; Maev, Oleg; Maguire, Kevin; Malde, Sneha; Malinin, Alexander; Maltsev, Timofei; Manca, Giulia; Mancinelli, Giampiero; Manning, Peter Michael; Maratas, Jan; Marchand, Jean Fran{ç}ois; Marconi, Umberto; Marin Benito, Carla; Marino, Pietro; Marks, J{ö}rg; Martellotti, Giuseppe; Martin, Morgan; Martinelli, Maurizio; Martinez Santos, Diego; Martinez Vidal, Fernando; Martins Tostes, Danielle; Massacrier, Laure Marie; Massafferri, Andr{é}; Matev, Rosen; Mathad, Abhijit; Mathe, Zoltan; Matteuzzi, Clara; Mauri, Andrea; Maurin, Brice; Mazurov, Alexander; McCann, Michael; McCarthy, James; McNab, Andrew; McNulty, Ronan; Meadows, Brian; Meier, Frank; Meissner, Marco; Melnychuk, Dmytro; Merk, Marcel; Merli, Andrea; Michielin, Emanuele; Milanes, Diego Alejandro; Minard, Marie-Noelle; Mitzel, Dominik Stefan; Mogini, Andrea; Molina Rodriguez, Josue; Monroy, Ignacio Alberto; Monteil, Stephane; Morandin, Mauro; Morawski, Piotr; Mord{à}, Alessandro; Morello, Michael Joseph; Moron, Jakub; Morris, Adam Benjamin; Mountain, Raymond; Muheim, Franz; Mulder, Mick; Mussini, Manuel; M{ü}ller, Dominik; M{ü}ller, Janine; M{ü}ller, Katharina; M{ü}ller, Vanessa; Naik, Paras; Nakada, Tatsuya; Nandakumar, Raja; Nandi, Anita; Nasteva, Irina; Needham, Matthew; Neri, Nicola; Neubert, Sebastian; Neufeld, Niko; Neuner, Max; Nguyen, Anh Duc; Nguyen-Mau, Chung; Nieswand, Simon; Niet, Ramon; Nikitin, Nikolay; Nikodem, Thomas; Novoselov, Alexey; O'Hanlon, Daniel Patrick; Oblakowska-Mucha, Agnieszka; Obraztsov, Vladimir; Ogilvy, Stephen; Oldeman, Rudolf; Onderwater, Gerco; Otalora Goicochea, Juan Martin; Otto, Adam; Owen, Patrick; Oyanguren, Maria Aranzazu; Pais, Preema Rennee; Palano, Antimo; Palombo, Fernando; Palutan, Matteo; Panman, Jacob; Papanestis, Antonios; Pappagallo, Marco; Pappalardo, Luciano; Pappenheimer, Cheryl; Parker, William; Parkes, Christopher; Passaleva, Giovanni; Pastore, Alessandra; Patel, Girish; Patel, Mitesh; Patrignani, Claudia; Pearce, Alex; Pellegrino, Antonio; Penso, Gianni; Pepe Altarelli, Monica; Perazzini, Stefano; Perret, Pascal; Pescatore, Luca; Petridis, Konstantinos; Petrolini, Alessandro; Petrov, Aleksandr; Petruzzo, Marco; Picatoste Olloqui, Eduardo; Pietrzyk, Boleslaw; Pikies, Malgorzata; Pinci, Davide; Pistone, Alessandro; Piucci, Alessio; Playfer, Stephen; Plo Casasus, Maximo; Poikela, Tuomas; Polci, Francesco; Poluektov, Anton; Polyakov, Ivan; Polycarpo, Erica; Pomery, Gabriela Johanna; Popov, Alexander; Popov, Dmitry; Popovici, Bogdan; Potterat, C{é}dric; Price, Eugenia; Price, Joseph David; Prisciandaro, Jessica; Pritchard, Adrian; Prouve, Claire; Pugatch, Valery; Puig Navarro, Albert; Punzi, Giovanni; Qian, Wenbin; Quagliani, Renato; Rachwal, Bartolomiej; Rademacker, Jonas; Rama, Matteo; Ramos Pernas, Miguel; Rangel, Murilo; Raniuk, Iurii; Raven, Gerhard; Redi, Federico; Reichert, Stefanie; dos Reis, Alberto; Remon Alepuz, Clara; Renaudin, Victor; Ricciardi, Stefania; Richards, Sophie; Rihl, Mariana; Rinnert, Kurt; Rives Molina, Vicente; Robbe, Patrick; Rodrigues, Ana Barbara; Rodrigues, Eduardo; Rodriguez Lopez, Jairo Alexis; Rodriguez Perez, Pablo; Rogozhnikov, Alexey; Roiser, Stefan; Romanovskiy, Vladimir; Romero Vidal, Antonio; Ronayne, John William; Rotondo, Marcello; Rudolph, Matthew Scott; Ruf, Thomas; Ruiz Valls, Pablo; Saborido Silva, Juan Jose; Sadykhov, Elnur; Sagidova, Naylya; Saitta, Biagio; Salustino Guimaraes, Valdir; Sanchez Mayordomo, Carlos; Sanmartin Sedes, Brais; Santacesaria, Roberta; Santamarina Rios, Cibran; Santimaria, Marco; Santovetti, Emanuele; Sarti, Alessio; Satriano, Celestina; Satta, Alessia; Saunders, Daniel Martin; Savrina, Darya; Schael, Stefan; Schellenberg, Margarete; Schiller, Manuel; Schindler, Heinrich; Schlupp, Maximilian; Schmelling, Michael; Schmelzer, Timon; Schmidt, Burkhard; Schneider, Olivier; Schopper, Andreas; Schubert, Konstantin; Schubiger, Maxime; Schune, Marie Helene; Schwemmer, Rainer; Sciascia, Barbara; Sciubba, Adalberto; Semennikov, Alexander; Sergi, Antonino; Serra, Nicola; Serrano, Justine; Sestini, Lorenzo; Seyfert, Paul; Shapkin, Mikhail; Shapoval, Illya; Shcheglov, Yury; Shears, Tara; Shekhtman, Lev; Shevchenko, Vladimir; Shires, Alexander; Siddi, Benedetto Gianluca; Silva Coutinho, Rafael; Silva de Oliveira, Luiz Gustavo; Simi, Gabriele; Simone, Saverio; Sirendi, Marek; Skidmore, Nicola; Skwarnicki, Tomasz; Smith, Eluned; Smith, Iwan Thomas; Smith, Jackson; Smith, Mark; Snoek, Hella; Sokoloff, Michael; Soler, Paul; Souza, Daniel; Souza De Paula, Bruno; Spaan, Bernhard; Spradlin, Patrick; Sridharan, Srikanth; Stagni, Federico; Stahl, Marian; Stahl, Sascha; Stefko, Pavol; Stefkova, Slavorima; Steinkamp, Olaf; Stemmle, Simon; Stenyakin, Oleg; Stevenson, Scott; Stoica, Sabin; Stone, Sheldon; Storaci, Barbara; Stracka, Simone; Straticiuc, Mihai; Straumann, Ulrich; Sun, Liang; Sutcliffe, William; Swientek, Krzysztof; Syropoulos, Vasileios; Szczekowski, Marek; Szumlak, Tomasz; T'Jampens, Stephane; Tayduganov, Andrey; Tekampe, Tobias; Tellarini, Giulia; Teubert, Frederic; Thomas, Christopher; Thomas, Eric; van Tilburg, Jeroen; Tisserand, Vincent; Tobin, Mark; Tolk, Siim; Tomassetti, Luca; Tonelli, Diego; Topp-Joergensen, Stig; Toriello, Francis; Tournefier, Edwige; Tourneur, Stephane; Trabelsi, Karim; Traill, Murdo; Tran, Minh T{â}m; Tresch, Marco; Trisovic, Ana; Tsaregorodtsev, Andrei; Tsopelas, Panagiotis; Tully, Alison; Tuning, Niels; Ukleja, Artur; Ustyuzhanin, Andrey; Uwer, Ulrich; Vacca, Claudia; Vagnoni, Vincenzo; Valat, Sebastien; Valenti, Giovanni; Vallier, Alexis; Vazquez Gomez, Ricardo; Vazquez Regueiro, Pablo; Vecchi, Stefania; van Veghel, Maarten; Velthuis, Jaap; Veltri, Michele; Veneziano, Giovanni; Venkateswaran, Aravindhan; Vernet, Maxime; Vesterinen, Mika; Viaud, Benoit; Vieira, Daniel; Vieites Diaz, Maria; Vilasis-Cardona, Xavier; Volkov, Vladimir; Vollhardt, Achim; Voneki, Balazs; Voong, David; Vorobyev, Alexey; Vorobyev, Vitaly; Voß, Christian; de Vries, Jacco; V{á}zquez Sierra, Carlos; Waldi, Roland; Wallace, Charlotte; Wallace, Ronan; Walsh, John; Wang, Jianchun; Ward, David; Wark, Heather Mckenzie; Watson, Nigel; Websdale, David; Weiden, Andreas; Whitehead, Mark; Wicht, Jean; Wilkinson, Guy; Wilkinson, Michael; Williams, Mark Richard James; Williams, Matthew; Williams, Mike; Williams, Timothy; Wilson, Fergus; Wimberley, Jack; Wishahi, Julian; Wislicki, Wojciech; Witek, Mariusz; Wormser, Guy; Wotton, Stephen; Wraight, Kenneth; Wright, Simon; Wyllie, Kenneth; Xie, Yuehong; Xing, Zhou; Xu, Zhirui; Yang, Zhenwei; Yin, Hang; Yu, Jiesheng; Yuan, Xuhao; Yushchenko, Oleg; Zangoli, Maria; Zarebski, Kristian Alexander; Zavertyaev, Mikhail; Zhang, Liming; Zhang, Yanxi; Zhang, Yu; Zhelezov, Alexey; Zheng, Yangheng; Zhokhov, Anatoly; Zhu, Xianglei; Zhukov, Valery; Zucchelli, Stefano

2017-02-10

A search is made for the highly-suppressed B meson decays $B^{+}\\rightarrow K^{+}K^{+}\\pi^{-}$ and $B^{+}\\rightarrow \\pi^{+}\\pi^{+}K^{-}$ using a data sample corresponding to an integrated luminosity of 3.0 $fb^{-1}$ collected by the LHCb experiment in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. No evidence is found for the decays, and upper limits at 90\\% confidence level are determined to be $\\mathcal{B}(B^{+}\\rightarrow K^{+}K^{+}\\pi^{-}) < 1.1\\times 10^{-8}$ and $\\mathcal{B}(B^{+}\\rightarrow \\pi^{+}\\pi^{+}K^{-}) < 4.6\\times 10^{-8}$.

K- Popping: Korean Women, K-Pop, and Fandom

OpenAIRE

Kim, Jungwon

2017-01-01

Korean popular music (hereafter K-pop) can be understood as an inclusive cultural phenomenon. K-pop fandom constitutes a sizeable portion of this phenomenon and is characteristic, to a large degree, of K-pop culture. However, female fans, especially in Korea, are frequently disdained in mainstream Korean culture, and their fandom has been undervalued and derided. Challenging this negative view of female fans, I autoethnographically examine Korean female K-pop fandom, based on my field researc...

Seafloor multibeam backscatter calibration experiment: comparing 45°-tilted 38-kHz split-beam echosounder and 30-kHz multibeam data

Science.gov (United States)

Ladroit, Yoann; Lamarche, Geoffroy; Pallentin, Arne

2018-06-01

Obtaining absolute seafloor backscatter measurements from hydrographic multibeam echosounders is yet to be achieved. We propose a low-cost experiment to calibrate the various acquisition modes of a 30-kHz Kongsberg EM 302 multibeam echosounder in a range of water depths. We use a 38-kHz Simrad EK60 calibrated fisheries split-beam echosounder mounted at 45° angle on the vessel's hull as a reference for the calibration. The processing to extract seafloor backscatter from the EK60 requires bottom detection, ray tracing and motion compensation to obtain acceptable geo-referenced backscatter measurements from this non-hydrographic system. Our experiment was run in Cook Strait, New Zealand, on well-known seafloor patches in shallow, mid, and deep-water depths. Despite acquisition issues due to weather, our results demonstrate the strong potential of such an approach to obtain system's absolute calibration which is required for quantitative use of backscatter strength data.

PPICA, Power Plant Investment Cost Analysis

International Nuclear Information System (INIS)

Lefevre, J.C.

2002-01-01

1 - Description of program or function: This software package contains two modules: - CAPITAL1 calculates investment costs from overnight costs, based on the capital structure of the utility (debt/equity ratio), return and interest rates according to the type of securities involved, and a standard-shaped curve of capital outlays during construction of a power plant. - FCRATE1 calculates the year-by-year revenue requirements to cover the capital-related charges incurred by the new investment and their economic equivalent: the levelled fixed-charge rate and capital contribution to the levelled unit power generation cost per kWh. They are proposed as an alternative to the corresponding modules CAPITAL and FCRATE, included in the LPGC (Levelled Power Generation Cost) suite of codes developed by ORNL and US-DOE. They perform the same type of analysis and provide the same results. 2 - Methods: Results output from CAPITAL1, in terms of the initial investment at startup and the fraction thereof that is allowable for tax depreciation, can be transferred automatically as data input to FCRATE1. Other user-defined data are: the project life, the time horizon of the economic analysis (which does not necessarily coincide with the project life), the plant load factor (lifetime average), the tax rate applicable to utility's income, the tax depreciation scheme and the tax charge accounting method (normalised or flow- through). The results of CAPITAL1 and FCRATE1 are expressed both in current money and in constant money of a reference year. Inflation rate and escalation rate of construction expenditures during construction period, and of fixed charges during service life are defined by the user. The discount rate is set automatically by the programme, equal to the weighted average tax-adjusted cost of money. 3 - Restrictions on the complexity of the problem: CAPITAL1 and FCRATE1 are 'alternatives', not 'substitutes', to the corresponding programs CAPITAL and FCRATE of the LPGC

Effective lifetime measurements in the $B_{s}^{0} \\rightarrow K^{+}K^{-}$, $B^{0} \\rightarrow K^{+}\\pi^{-}$ and $B_{s}^{0} \\rightarrow \\pi^{+}K^{-}$ decays

CERN Document Server

INSPIRE-00258707; Adeva, B.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Alvarez Cartelle, P.; Alves Jr, A.A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Anderson, J.; Andreassen, R.; Andreotti, M.; Andrews, J.E.; Appleby, R.B.; Aquines Gutierrez, O.; Archilli, F.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J.J.; Badalov, A.; Balagura, V.; Baldini, W.; Barlow, R.J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Bauer, Th.; Bay, A.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Belogurov, S.; Belous, K.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Benson, S.; Benton, J.; Berezhnoy, A.; Bernet, R.; Bettler, M.O.; van Beuzekom, M.; Bien, A.; Bifani, S.; Bird, T.; Bizzeti, A.; Bjornstad, P.M.; Blake, T.; Blanc, F.; Blouw, J.; Blusk, S.; Bocci, V.; Bondar, A.; Bondar, N.; Bonivento, W.; Borghi, S.; Borgia, A.; Borsato, M.; Bowcock, T.J.V.; Bowen, E.; Bozzi, C.; Brambach, T.; van den Brand, J.; Bressieux, J.; Brett, D.; Britsch, M.; Britton, T.; Brook, N.H.; Brown, H.; Bursche, A.; Busetto, G.; Buytaert, J.; Cadeddu, S.; Calabrese, R.; Calvi, M.; Calvo Gomez, M.; Camboni, A.; Campana, P.; Campora Perez, D.; Carbone, A.; Carboni, G.; Cardinale, R.; Cardini, A.; Carranza-Mejia, H.; Carson, L.; Carvalho Akiba, K.; Casse, G.; Cassina, L.; Garcia, L.Castillo; Cattaneo, M.; Cauet, Ch.; Cenci, R.; Charles, M.; Charpentier, Ph.; Cheung, S.F.; Chiapolini, N.; Chrzaszcz, M.; Ciba, K.; Cid Vidal, X.; Ciezarek, G.; Clarke, P.E.L.; Clemencic, M.; Cliff, H.V.; Closier, J.; Coco, V.; Cogan, J.; Cogneras, E.; Collins, P.; Comerma-Montells, A.; Contu, A.; Cook, A.; Coombes, M.; Coquereau, S.; Corti, G.; Corvo, M.; Counts, I.; Couturier, B.; Cowan, G.A.; Craik, D.C.; Cruz Torres, M.; Cunliffe, S.; Currie, R.; D'Ambrosio, C.; Dalseno, J.; David, P.; David, P.N.Y.; Davis, A.; De Bruyn, K.; De Capua, S.; De Cian, M.; de Miranda, J.M.; De Paula, L.; De Silva, W.; De Simone, P.; Decamp, D.; Deckenhoff, M.; Del Buono, L.; Deleage, N.; Derkach, D.; Deschamps, O.; Dettori, F.; Di Canto, A.; Dijkstra, H.; Donleavy, S.; Dordei, F.; Dorigo, M.; Dosil Suarez, A.; Dossett, D.; Dovbnya, A.; Dupertuis, F.; Durante, P.; Dzhelyadin, R.; Dziurda, A.; Dzyuba, A.; Easo, S.; Egede, U.; Egorychev, V.; Eidelman, S.; Eisenhardt, S.; Eitschberger, U.; Ekelhof, R.; Eklund, L.; El Rifai, I.; Elsasser, Ch.; Esen, S.; Evans, T.; Falabella, A.; Farber, C.; Farinelli, C.; Farley, N.; Farry, S.; Ferguson, D.; Fernandez Albor, V.; Ferreira Rodrigues, F.; Ferro-Luzzi, M.; Filippov, S.; Fiore, M.; Fiorini, M.; Firlej, M.; Fitzpatrick, C.; Fiutowski, T.; Fontana, M.; Fontanelli, F.; Forty, R.; Francisco, O.; Frank, M.; Frei, C.; Frosini, M.; Fu, J.; Furfaro, E.; Gallas Torreira, A.; Galli, D.; Gallorini, S.; Gambetta, S.; Gandelman, M.; Gandini, P.; Gao, Y.; Garofoli, J.; Garra Tico, J.; Garrido, L.; Gaspar, C.; Gauld, R.; Gavardi, L.; Gersabeck, E.; Gersabeck, M.; Gershon, T.; Ghez, Ph.; Gianelle, A.; Giani', S.; Gibson, V.; Giubega, L.; Gligorov, V.V.; Gobel, C.; Golubkov, D.; Golutvin, A.; Gomes, A.; Gordon, H.; Gotti, C.; Grabalosa Gandara, M.; Graciani Diaz, R.; Granado Cardoso, L.A.; Grauges, E.; Graziani, G.; Grecu, A.; Greening, E.; Gregson, S.; Griffith, P.; Grillo, L.; Grunberg, O.; Gui, B.; Gushchin, E.; Guz, Yu.; Gys, T.; Hadjivasiliou, C.; Haefeli, G.; Haen, C.; Haines, S.C.; Hall, S.; Hamilton, B.; Hampson, T.; Han, X.; Hansmann-Menzemer, S.; Harnew, N.; Harnew, S.T.; Harrison, J.; Hartmann, T.; He, J.; Head, T.; Heijne, V.; Hennessy, K.; Henrard, P.; Henry, L.; Hernando Morata, J.A.; van Herwijnen, E.; Hess, M.; Hicheur, A.; Hill, D.; Hoballah, M.; Hombach, C.; Hulsbergen, W.; Hunt, P.; Hussain, N.; Hutchcroft, D.; Hynds, D.; Idzik, M.; Ilten, P.; Jacobsson, R.; Jaeger, A.; Jalocha, J.; Jans, E.; Jaton, P.; Jawahery, A.; Jezabek, M.; Jing, F.; John, M.; Johnson, D.; Jones, C.R.; Joram, C.; Jost, B.; Jurik, N.; Kaballo, M.; Kandybei, S.; Kanso, W.; Karacson, M.; Karbach, T.M.; Kelsey, M.; Kenyon, I.R.; Ketel, T.; Khanji, B.; Khurewathanakul, C.; Klaver, S.; Kochebina, O.; Kolpin, M.; Komarov, I.; Koopman, R.F.; Koppenburg, P.; Korolev, M.; Kozlinskiy, A.; Kravchuk, L.; Kreplin, K.; Kreps, M.; Krocker, G.; Krokovny, P.; Kruse, F.; Kucharczyk, M.; Kudryavtsev, V.; Kurek, K.; Kvaratskheliya, T.; La Thi, V.N.; Lacarrere, D.; Lafferty, G.; Lai, A.; Lambert, D.; Lambert, R.W.; Lanciotti, E.; Lanfranchi, G.; Langenbruch, C.; Langhans, B.; Latham, T.; Lazzeroni, C.; Le Gac, R.; van Leerdam, J.; Lees, J.P.; Lefevre, R.; Leflat, A.; Lefrancois, J.; Leo, S.; Leroy, O.; Lesiak, T.; Leverington, B.; Li, Y.; Liles, M.; Lindner, R.; Linn, C.; Lionetto, F.; Liu, B.; Liu, G.; Lohn, S.; Longstaff, I.; Lopes, J.H.; Lopez-March, N.; Lowdon, P.; Lu, H.; Lucchesi, D.; Luo, H.; Lupato, A.; Luppi, E.; Lupton, O.; Machefert, F.; Machikhiliyan, I.V.; Maciuc, F.; Maev, O.; Malde, S.; Manca, G.; Mancinelli, G.; Manzali, M.; Maratas, J.; Marchand, J.F.; Marconi, U.; Benito, C.Marin; Marino, P.; Marki, R.; Marks, J.; Martellotti, G.; Martens, A.; Martin Sanchez, A.; Martinelli, M.; Martinez Santos, D.; Martinez Vidal, F.; Martins Tostes, D.; Massafferri, A.; Matev, R.; Mathe, Z.; Matteuzzi, C.; Mazurov, A.; McCann, M.; McCarthy, J.; McNab, A.; McNulty, R.; McSkelly, B.; Meadows, B.; Meier, F.; Meissner, M.; Merk, M.; Milanes, D.A.; Minard, M.N.; Moggi, N.; Molina Rodriguez, J.; Monteil, S.; Moran, D.; Morandin, M.; Morawski, P.; Morda, A.; Morello, M.J.; Moron, J.; Mountain, R.; Muheim, F.; Muller, K.; Muresan, R.; Mussini, M.; Muster, B.; Naik, P.; Nakada, T.; Nandakumar, R.; Nasteva, I.; Needham, M.; Neri, N.; Neubert, S.; Neufeld, N.; Neuner, M.; Nguyen, A.D.; Nguyen, T.D.; Nguyen-Mau, C.; Nicol, M.; Niess, V.; Niet, R.; Nikitin, N.; Nikodem, T.; Novoselov, A.; Oblakowska-Mucha, A.; Obraztsov, V.; Oggero, S.; Ogilvy, S.; Okhrimenko, O.; Oldeman, R.; Onderwater, G.; Orlandea, M.; Otalora Goicochea, J.M.; Owen, P.; Oyanguren, A.; Pal, B.K.; Palano, A.; Palombo, F.; Palutan, M.; Panman, J.; Papanestis, A.; Pappagallo, M.; Parkes, C.; Parkinson, C.J.; Passaleva, G.; Patel, G.D.; Patel, M.; Patrignani, C.; Pazos Alvarez, A.; Pearce, A.; Pellegrino, A.; Pepe Altarelli, M.; Perazzini, S.; Perez Trigo, E.; Perret, P.; Perrin-Terrin, M.; Pescatore, L.; Pesen, E.; Petridis, K.; Petrolini, A.; Picatoste Olloqui, E.; Pietrzyk, B.; Pilar, T.; Pinci, D.; Pistone, A.; Playfer, S.; Plo Casasus, M.; Polci, F.; Poluektov, A.; Polycarpo, E.; Popov, A.; Popov, D.; Popovici, B.; Potterat, C.; Powell, A.; Prisciandaro, J.; Pritchard, A.; Prouve, C.; Pugatch, V.; Puig Navarro, A.; Punzi, G.; Qian, W.; Rachwal, B.; Rademacker, J.H.; Rakotomiaramanana, B.; Rama, M.; Rangel, M.S.; Raniuk, I.; Rauschmayr, N.; Raven, G.; Reichert, S.; Reid, M.M.; dos Reis, A.C.; Ricciardi, S.; Richards, A.; Rihl, M.; Rinnert, K.; Rives Molina, V.; Roa Romero, D.A.; Robbe, P.; Rodrigues, A.B.; Rodrigues, E.; Rodriguez Perez, P.; Roiser, S.; Romanovsky, V.; Vidal, A.Romero; Rotondo, M.; Rouvinet, J.; Ruf, T.; Ruffini, F.; Ruiz, H.; Valls, P.Ruiz; Sabatino, G.; Saborido Silva, J.J.; Sagidova, N.; Sail, P.; Saitta, B.; Salustino Guimaraes, V.; Sanchez Mayordomo, C.; Sanmartin Sedes, B.; Santacesaria, R.; Santamarina Rios, C.; Santovetti, E.; Sapunov, M.; Sarti, A.; Satriano, C.; Satta, A.; Savrie, M.; Savrina, D.; Schiller, M.; Schindler, H.; Schlupp, M.; Schmelling, M.; Schmidt, B.; Schneider, O.; Schopper, A.; Schune, M.H.; Schwemmer, R.; Sciascia, B.; Sciubba, A.; Seco, M.; Semennikov, A.; Senderowska, K.; Sepp, I.; Serra, N.; Serrano, J.; Sestini, L.; Seyfert, P.; Shapkin, M.; Shapoval, I.; Shcheglov, Y.; Shears, T.; Shekhtman, L.; Shevchenko, V.; Shires, A.; Coutinho, R.Silva; Simi, G.; Sirendi, M.; Skidmore, N.; Skwarnicki, T.; Smith, N.A.; Smith, E.; Smith, E.; Smith, J.; Smith, M.; Snoek, H.; Sokoloff, M.D.; Soler, F.J.P.; Soomro, F.; Souza, D.; Souza De Paula, B.; Spaan, B.; Sparkes, A.; Spinella, F.; Spradlin, P.; Stagni, F.; Stahl, S.; Steinkamp, O.; Stenyakin, O.; Stevenson, S.; Stoica, S.; Stone, S.; Storaci, B.; Stracka, S.; Straticiuc, M.; Straumann, U.; Stroili, R.; Subbiah, V.K.; Sun, L.; Sutcliffe, W.; Swientek, K.; Swientek, S.; Syropoulos, V.; Szczekowski, M.; Szczypka, P.; Szilard, D.; Szumlak, T.; T'Jampens, S.; Teklishyn, M.; Tellarini, G.; Teubert, F.; Thomas, C.; Thomas, E.; van Tilburg, J.; Tisserand, V.; Tobin, M.; Tolk, S.; Tomassetti, L.; Tonelli, D.; Topp-Joergensen, S.; Torr, N.; Tournefier, E.; Tourneur, S.; Tran, M.T.; Tresch, M.; Tsaregorodtsev, A.; Tsopelas, P.; Tuning, N.; Garcia, M.Ubeda; Ukleja, A.; Ustyuzhanin, A.; Uwer, U.; Vagnoni, V.; Valenti, G.; Vallier, A.; Vazquez Gomez, R.; Vazquez Regueiro, P.; Vazquez Sierra, C.; Vecchi, S.; Velthuis, J.J.; Veltri, M.; Veneziano, G.; Vesterinen, M.; Viaud, B.; Vieira, D.; Vieites Diaz, M.; Vilasis-Cardona, X.; Vollhardt, A.; Volyanskyy, D.; Voong, D.; Vorobyev, A.; Vorobyev, V.; Voss, C.; Voss, H.; de Vries, J.A.; Waldi, R.; Wallace, C.; Wallace, R.; Walsh, J.; Wandernoth, S.; Wang, J.; Ward, D.R.; Watson, N.K.; Websdale, D.; Whitehead, M.; Wicht, J.; Wiedner, D.; Wilkinson, G.; Williams, M.P.; Williams, M.; Wilson, F.F.; Wimberley, J.; Wishahi, J.; Wislicki, W.; Witek, M.; Wormser, G.; Wotton, S.A.; Wright, S.; Wu, S.; Wyllie, K.; Xie, Y.; Xing, Z.; Xu, Z.; Yang, Z.; Yuan, X.; Yushchenko, O.; Zangoli, M.; Zavertyaev, M.; Zhang, F.; Zhang, L.; Zhang, W.C.; Zhang, Y.; Zhelezov, A.; Zhokhov, A.; Zhong, L.; Zvyagin, A.

2014-01-01

Measurements of the effective lifetimes in the $B_{s}^{0} \\rightarrow K^{+}K^{-}$, $B^{0} \\rightarrow K^{+}\\pi^{-}$ and $B_{s}^{0} \\rightarrow \\pi^{+}K^{-}$ decays are presented using $1.0~\\mathrm{fb^{-1}}$ of $pp$ collision data collected at a centre-of-mass energy of 7 TeV by the LHCb experiment. The analysis uses a data-driven approach to correct for the decay time acceptance. The measured effective lifetimes are $\\tau_{B_{s}^{0} \\rightarrow K^{+}K^{-}}$ = $1.407~\\pm~0.016~\\pm~0.007~\\mathrm{ps}$, $\\tau_{B^{0} \\rightarrow K^{+}\\pi^{-}}$ = $1.524~\\pm~0.011~\\pm~0.004~\\mathrm{ps}$, $\\tau_{B_{s}^{0} \\rightarrow \\pi^{+}K^{-}}$ = $1.60~\\pm~0.06~\\pm~0.01~\\mathrm{ps}$. This is the most precise determination to date of the effective lifetime in the $B_{s}^{0} \\rightarrow K^{+}K^{-}$ decay and provides constraints on contributions from physics beyond the Standard Model to the $B_{s}^{0}$ mixing phase and the width difference $\\Delta\\Gamma_{s}$.

Pros and cons of symmetrical dual-k spacer technology in hybrid FinFETs

Science.gov (United States)

Pradhan, K. P.; Andrade, M. G. C.; Sahu, P. K.

2016-12-01

The symmetrical dual-k spacer technology in hybrid FinFETs has been widely explored for better electrostatic control of the fin-based devices in nanoscale region. Since, high-k tangible spacer materials are broadly became a matter of study due to their better immunity to the short channel effects (SCEs) in nano devices. However, the only cause that restricts the circuit designers from using high-k spacer is the unreasonable increasing fringing capacitances. This work quantitatively analyzed the benefits and drawbacks of considering two different dielectric spacer materials symmetrically in either sides of the channel for the hybrid device. From the demonstrated results, the inclusion of high-k spacer predicts an effective reduction in off-state leakage along with an improvement in drive current. However, these devices have paid the cost in terms of a high total gate-to-gate capacitance (Cgg) that consequently results poor cutoff frequency (fT) and delay.

CONTROLLED CONDENSATION IN K-NN AND ITS APPLICATION FOR REAL TIME COLOR IDENTIFICATION

Directory of Open Access Journals (Sweden)

Carmen Villar Patiño

2017-04-01

Full Text Available k-NN algorithms are frequently used in statistical classification. They are accurate and distribution free. Despite these advantages, k-NN algorithms imply a high computational cost. To find efficient ways to implement them is an important challenge in pattern recognition. In this article, an improved version of the k-NN Controlled Condensation algorithm is introduced. Its potential for instantaneous color identification in real time is also analyzed. This algorithm is based on the representation of data in terms of a reduced set of informative prototypes. It includes two parameters to control the balance between speed and precision. This gives us the opportunity to achieve a convenient percentage of condensation without incurring in an important loss of accuracy. We test our proposal in an instantaneous color identification exercise in video images. We achieve the real time identification by using k-NN Controlled Condensation executed through multi-threading programming methods. The results are encouraging.

Polarization and CP asymmetries in the decays B→K*ψ, K*ω, and K*ρ

International Nuclear Information System (INIS)

Kramer, G.; Palmer, W.F.

1991-11-01

We calculate branching ratios, polarization and CP asymmetries for the final exclusive states K * ψ, K * ω, K * ρ, make comparisons with experimental data, and suggest further tests of the underlying theoretical framework. (orig.)

Capitals Cost and the Investments Actualisation Rate

Directory of Open Access Journals (Sweden)

Ion Stancu

2006-02-01

Full Text Available In this article, the author has assumed himself an assignment somehow ostentatious but useful, we believe, naming the one to illustrate by means of figures, the influence of both leverage and economic growth over the cost of capital, cost which will be used in capital budgeting. This synthesis is meant to be a forthcoming approach to a later investigation of the problems raised by the estimation of the cost of capital in the specific conditions of both the financial market in Romania and the quality of the economic-financial information, information available for this estimation. The discount rate for an investment project (kinv with a risk equal to the risk undertaken by the enterprise and financed within the firm’s capital structure itself (having the same leverage is equal to the (weighted average cost of capital in the respective risk class (k. Under these circumstances, it is interesting to find out this opportunity cost of capital invested in a medium-sized enterprise: a with investments in rebuilding the productive capacity, all equity financed; b with investments in rebuilding the productive capacity, financed both by equity and debt; c with new investments, all equity financed; d with new investments, financed both by equity and debt. Under these conditions, we estimate the effect of both the leverage and economic growth over the cost of capital (kec and kc to be able to determine in the end the discount rate of the analyzed investment (kinv: for enterprises with only maintaining investments (g = 0, unlevered (U and levered (L; for enterprises with growing investments (g > 0, unlevered (U and levered (L.

Capitals Cost and the Investments Actualisation Rate

Directory of Open Access Journals (Sweden)

Ion Stancu

2006-04-01

Full Text Available In this article, the author has assumed himself an assignment somehow ostentatious but useful, we believe, naming the one to illustrate by means of figures, the influence of both leverage and economic growth over the cost of capital, cost which will be used in capital budgeting. This synthesis is meant to be a forthcoming approach to a later investigation of the problems raised by the estimation of the cost of capital in the specific conditions of both the financial market in Romania and the quality of the economic-financial information, information available for this estimation. The discount rate for an investment project (kinv with a risk equal to the risk undertaken by the enterprise and financed within the firm’s capital structure itself (having the same leverage is equal to the (weighted average cost of capital in the respective risk class (k. Under these circumstances, it is interesting to find out this opportunity cost of capital invested in a medium-sized enterprise: a with investments in rebuilding the productive capacity, all equity financed; b with investments in rebuilding the productive capacity, financed both by equity and debt; c with new investments, all equity financed; d with new investments, financed both by equity and debt. Under these conditions, we estimate the effect of both the leverage and economic growth over the cost of capital (kec and kc to be able to determine in the end the discount rate of the analyzed investment (kinv: for enterprises with only maintaining investments (g = 0, unlevered (U and levered (L; for enterprises with growing investments (g > 0, unlevered (U and levered (L.

Gas Generation from K East Basin Sludges - Series II Testing

International Nuclear Information System (INIS)

Bryan, Samuel A.; Delegard, Calvin H.; Schmidt, Andrew J.; Sell, Rachel L.; Silvers, Kurt L.; Gano, Susan R.; Thornton, Brenda M.

2001-01-01

This report describes work to examine the gas generation behavior of actual K East (KE) Basin floor, pit and canister sludge. Mixed and unmixed and fractionated KE canister sludge were tested, along with floor and pit sludges from areas in the KE Basin not previously sampled. The first report in this series focused on gas generation from KE floor and canister sludge collected using a consolidated sampling technique. The third report will present results of gas generation testing of irradiated uranium fuel fragments with and without sludge addition. The path forward for management of the K Basin Sludge is to retrieve, ship, and store the sludge at T Plant until final processing at some future date. Gas generation will impact the designs and costs of systems associated with retrieval, transportation and storage of sludge

Photovoltaic systems: A cost competitive option to supply energy to off-grid agricultural communities in arid regions

International Nuclear Information System (INIS)

Qoaider, Louy; Steinbrecht, Dieter

2010-01-01

The main objective of this work is to investigate the economic feasibility of photovoltaic technology to supply the entire energy demands to off-grid irrigated-farming-based communities in the arid regions. This aims at helping these communities to find practical solutions to cope with the rapid rising electricity generation costs, mainly by diesel generators (gensets). The genset electricity costs are typically affected by the high fossil fuel prices, the fuel transport costs and the intensive operation and maintenance (O and M) requirements. The work was conducted on a representative site from which conclusions could be drawn for similar regions. The case study was performed in the New Kalabsha Village in the Lake Nasser Region (LNR) in southern Egypt. The work involved the technical design and the calculation of the life cycle costs (LCC) of a PV system, which is able to supply the village with its entire energy demand. The PV generator was sized in such a way to daily pump 111 000 m 3 of lake water to irrigate 1260 ha acreage plots and to electrify the adjacent village's households. The required pumps were designed to pump the fluctuating lake's water for a maximum differential head of 17 m in four different locations. Consequently, water from the four pumping stations flows freely by gravity forces to the different plots through overhead open canals. The electricity generation costs and the performance of the designed PV generator were compared with those of an equivalent diesel generator (genset) in order to prove its competitiveness. With this regard, the real market value of the diesel fuel of 86.55 c Euro l -1 was considered for calculating the costs of genset generated electricity. The results showed that the genset electricity unit costs 39 c Euro kW h -1 while a unit of PV electricity costs only 13 c Euro kW h -1 for the equivalent system size and project lifetime. Furthermore, the subsidised genset electricity cost was calculated to be 12 c Euro kW h

Results from Super-Kamiokande and K2K

Indian Academy of Sciences (India)

The probability of flavor oscillation (in the simplest, two-component case) is ..... K2K had collected about half of its total planned protons-on-target when the accident at ... [14] Design, construction, and operation of SciFi tracking detector for K2K ...

Tax compliance costs: A review of cost burdens and cost structures

OpenAIRE

Eichfelder, Sebastian; Vaillancourt, François

2014-01-01

Our paper provides a comprehensive report of empirical research on tax compliance costs. Compared to previous reviews, our focus is on average costs for sub-groups (individual taxpayers, small business-es, large businesses) and the composition of the cost burden with regards to different cost components(in-house time effort, external adviser costs, other monetary expenses), different taxes (e.g. income tax, value added tax) and different activities like tax accounting and tax planning. In add...

Structural investigation on K3Gd5(PO4)6 in between 20 K to 1073 K

International Nuclear Information System (INIS)

Bevara, Samatha; Achary, S.N.; Tyagi, A.K.; Mishra, K.K.; Ravindran, T.R.; Sinha, A.K.; Sastry, P.U.

2016-01-01

Evolution of crystal structure of K 3 Gd 5 (PO 4 ) 6 in the temperature range from 20 K to 1073 K, as observed from combined variable temperature X-ray diffraction (using both synchrotron source and Cu K α lab source) and Raman spectroscopic studies is communicated in the manuscript. The title compound has an open tunnel containing three dimensional structure built by periodic arrangements of (Gd 5 (PO 4 ) 6 ) 3- ions which in turn are formed by PO 4 tetrahedra and GdO n (n = 8 and 9) polyhedra and these tunnels are occupied by K + ions. The XRD patterns in the entire temperature range of study indicated no change in the crystal structural, which is also supported by differential thermal analyses and Raman spectroscopy. Average axial thermal expansion coefficients between 20K and 1073 K are : α a =10.6 x 10 -6 K -1 , α b = 5.5 x 10 -6 K -1 and α c = 16.4 X 10.6 -6 K -1 . (author)

Cost effective solution using inverse lithography OPC for DRAM random contact layer