WorldWideScience

Sample records for corrugated pipe culverts

  1. Study on dynamic response of embedded long span corrugated steel culverts using scaled model shaking table tests and numerical analyses

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A series of scaled-model shaking table tests and its simulation analyses using dynamic finite element method were performed to clarify the dynamic behaviors and the seismic stability of embedded corrugated steel culverts due to strong earthquakes like the 1995 Hyogoken-nanbu earthquake. The dynamic strains of the embedded culvert models and the seismic soil pressure acting on the models due to sinusoidal and random strong motions were investigated. This study verified that the corrugated culvert model was subjected to dynamic horizontal forces (lateral seismic soil pressure) from the surrounding ground,which caused the large bending strains on the structure; and that the structures do not exceed the allowable plastic deformation and do not collapse completely during strong earthquake like Hyogoken-nanbu earthquake. The results obtained are useful for design and construction of embedded long span corrugated steel culverts in seismic regions.

  2. Analysis of brook trout spatial behavior during passage attempts in corrugated culverts using near-infrared illumination video imagery

    Science.gov (United States)

    Bergeron, Normand E.; Constantin, Pierre-Marc; Goerig, Elsa; Castro-Santos, Theodore R.

    2016-01-01

    We used video recording and near-infrared illumination to document the spatial behavior of brook trout of various sizes attempting to pass corrugated culverts under different hydraulic conditions. Semi-automated image analysis was used to digitize fish position at high temporal resolution inside the culvert, which allowed calculation of various spatial behavior metrics, including instantaneous ground and swimming speed, path complexity, distance from side walls, velocity preference ratio (mean velocity at fish lateral position/mean crosssectional velocity) as well as number and duration of stops in forward progression. The presentation summarizes the main results and discusses how they could be used to improve fish passage performance in culverts.

  3. Onset of Flow Induced Tonal Noise in Corrugated Pipe Segments

    NARCIS (Netherlands)

    Rudenko, O.; Nakiboglu, G.; Hirschberg, Abraham

    2014-01-01

    Corrugated pipes combine small-scale rigidity and large-scale flexibility, which make them very useful in industrial applications. The flow through such a pipe can induce strong undesirable tonal noise (whistling) and even drive integrity threatening structural vibrations. Placing a corrugated

  4. Development of Submersible Corrugated Pipe Sewage Heat Exchanger

    Institute of Scientific and Technical Information of China (English)

    BAI Li; SHI Yan; TAN Yu-fei

    2009-01-01

    Based on the characteristics of heat transfer for corrugated pipe,a method of calculating and de-sign on the submersible corrugated pipe sewage heat exchanger was put forward theoretically and experimental-ly.The actual movement parameters of air-conditioning system used in this heat exchanger were measured.The experimental result shows that the quantity of heat transfer of the corrugated pipe sewage heat exchanger can satisfy the building's load with the average coefficient of performance 4.55.At the same time.the quantity ot heat transfer of the corrugated pipe sewage heat exchanger was compared with that of the other nonmetallic sewage heat exchangers(i.e.,the plastic-Al pipe sewage heat exchanger and PP-R pipe sewage heat exchanger)experimentally.It is found out that the effect of heat transfer for submersible corrugated pipe sewage heat ex-changer is superior to those of the plastic-Al pipe and the PP-R pipe.The quantity of heat transfer per mile of corrugated pipe sewage heat exchanger is 5.2 times as much as that of the plastic-Al pipe,and it is 8.1 times as much as that of PP-R pipe.

  5. Measurements of Terahertz Generation in a Metallic, Corrugated Beam Pipe

    CERN Document Server

    Bane, K L F; Fedurin, M; Kusche, K; Swinson, C; Xiang, D

    2016-01-01

    A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 um. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation.

  6. 78 FR 5715 - Construction and Maintenance-Culvert Pipe Selection

    Science.gov (United States)

    2013-01-28

    ... 12630. Executive Order 12988 (Civil Justice Reform) This action meets applicable standards in sections 3(a) and 3(b)(2) of Executive Order 12988, Civil Justice Reform, to minimize litigation, eliminate..., Transportation, Highways and roads, Culvert material types. Issued on: January 17, 2013. Victor M....

  7. Numerical simulation of turbulent flow in corrugated pipes

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Henrique S. de; Morales, Rigoberto E.M.; Franco, Admilson T.; Junqueira, Silvio L.M.; Erthal, Raul H. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil). Dept. Academico de Mecanica (DAMEC)]. E-mails: rique.stel@gmail.com; rmorales@utfpr.edu.br; admilson@utfpr.edu.br; silvio@utfpr.edu.br; rherthal@utfpr.edu.br; Goncalves, Marcelo de Albuquerque Lima [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)]. E-mail: marcelog@petrobras.com.br

    2008-07-01

    Corrugated pipes are used in various engineering applications such heat exchangers and oil transport. In most cases these pipes consist of periodically distributed grooves at the duct inner wall. Numerical and experimental works reported the influence of grooves height and length in the turbulent flow by inspection of several turbulent properties such as velocity fluctuations and Reynolds stress. The present article aims to investigate the influence of grooves height and length in the global friction factor of turbulent flow through periodically corrugated pipes. Mass and momentum conservation equations are revised and specific boundary conditions are set to characterize a periodic fully developed regime in a single axisymmetric bidimensional module which represents the periodically corrugated duct geometry. The set of algebraic equations is discretized through the Finite Volume Method, with the Hybrid interpolation scheme applied to the convective terms, and solved using the commercial software PHOENICS CFD. The simulation of turbulent, incompressible, isothermal and single-phase flow is considered. The algebraic turbulence model LVEL is used. Four geometric configurations are assumed, including grooves height and length variations, in order to compare their influence on the friction factor. The obtained numerical friction factors show good agreement with previous experimental results, specially for Reynolds numbers over 20000. Numerical results for corrugated pipes compared to the Blasius smooth pipe correlation shows that the friction factor increases compared to smooth pipes, and such increase is more significant for higher Reynolds numbers and for larger grooves as well. These trends appear to be related to an enhancement of the momentum transport over the corrugated wall due to the recirculating pattern inside the grooves, in accordance with previous experimental works (author)

  8. Flow Pressure Loss through Straight Annular Corrugated Pipes

    Science.gov (United States)

    Sargent, Joseph R.; Kirk, Daniel R.; Marsell, Brandon; Roth, Jacob; Schallhorn, Paul A.; Pitchford, Brian; Weber, Chris; Bulk, Timothy

    2016-01-01

    Pressure loss through annular corrugated pipes, using fully developed gaseous nitrogen representing purge pipes in spacecraft fairings, was studied to gain insight into a friction factor coefficient for these pipes. Twelve pipes were tested: four Annuflex, four Masterflex and two Titeflex with ¼”, 3/8”, ½” and ¾” inner diameters. Experimental set-up was validated using smooth-pipe and showed good agreement to the Moody diagram. Nitrogen flow rates between 0-200 standard cubic feet per hour were used, producing approximate Reynolds numbers from 300-23,000. Corrugation depth varied from 0.248 = E/D = 0.349 and relative corrugation pitch of 0.192 = P/D = 0.483. Differential pressure per unit length was measured and calculated using 8-9 equidistant pressure taps. A detailed experimental uncertainty analysis, including correlated bias error terms, is presented. Results show larger differential pressure losses than smooth-pipes with similar inner diameters resulting in larger friction factor coefficients.

  9. Measurements of terahertz radiation generated using a metallic, corrugated pipe

    Science.gov (United States)

    Bane, Karl; Stupakov, Gennady; Antipov, Sergey; Fedurin, Mikhail; Kusche, Karl; Swinson, Christina; Xiang, Dao

    2017-02-01

    A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 μm. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation, but with short rise time, to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation. For the THz pulse we obtain and compare with calculations: the central frequency, the bandwidth, and the spectral power-compared to a diffraction radiation background signal.

  10. Measurements of Terahertz Radiation Generated using a Metallic, Corrugated Pipe

    CERN Document Server

    Bane, Karl; Antipov, Sergey; Fedurin, Mikhail; Kusche, Karl; Swinson, Christina; Xiang, Dao

    2016-01-01

    A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 um. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation, but with short rise time, to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation. For the THz pulse we obtain and compare with calculations: the cen...

  11. A linear model for the onset of whistling in corrugated pipe segments: influence of geometry

    NARCIS (Netherlands)

    Rudenko, O.; Meertens, D.; Nakiboǧlu, G.; Hirschberg, A.; Belfroid, S.P.C.

    2013-01-01

    Corrugated pipes combine small-scale rigidity and large-scale flexibility, which makes them very useful in industrial applications. The flow through such a pipe can induce strong undesirable whistling noises and even drive dangerous structural vibrations. Placing a short corrugated segment along a

  12. Surface Impedance Formalism for a Metallic Beam Pipe with Small Corrugations

    Energy Technology Data Exchange (ETDEWEB)

    Stupakov, G.; Bane, K.L.F.; /SLAC

    2012-08-30

    A metallic pipe with wall corrugations is of special interest in light of recent proposals to use such a pipe for the generation of terahertz radiation and for energy dechirping of electron bunches in free electron lasers. In this paper we calculate the surface impedance of a corrugated metal wall and show that it can be reduced to that of a thin layer with dielectric constant {epsilon} and magnetic permeability {mu}. We develop a technique for the calculation of these constants, given the geometrical parameters of the corrugations. We then calculate, for the specific case of a round metallic pipe with small corrugations, the frequency and strength of the resonant mode excited by a relativistic beam. Our analytical results are compared with numerical simulations, and are shown to agree well.

  13. Simulation and analysis on ultrasonic testing for the cement grouting defects of the corrugated pipe

    Energy Technology Data Exchange (ETDEWEB)

    Qingbang, Han; Ling, Chen; Changping, Zhu [Changzhou Key Laboratory of Sensor Networks and Environmental Sensing, College of IOT, Hohai University Changzhou, Jiangsu, 213022 (China)

    2014-02-18

    The defects exist in the cement grouting process of prestressed corrugated pipe may directly impair the bridge safety. In this paper, sound fields propagation in concrete structures with corrugated pipes and the influence of various different defects are simulated and analyzed using finite element method. The simulation results demonstrate a much complex propagation characteristic due to multiple reflection, refraction and scattering, where the scattering signals caused by metal are very strong, while the signals scattered by an air bubble are weaker. The influence of defect both in time and frequency domain are found through deconvolution treatment. In the time domain, the deconvolution signals correspond to larger defect display a larger head wave amplitude and shorter arrive time than those of smaller defects; in the frequency domain, larger defect also shows a stronger amplitude, lower center frequency and lower cutoff frequency.

  14. Heat transfer enhancement and pumping power optimization using CuO-water nanofluid through rectangular corrugated pipe

    Science.gov (United States)

    Salehin, Musfequs; Ehsan, Mohammad Monjurul; Islam, A. K. M. Sadrul

    2017-06-01

    Heat transfer enhancement by corrugation in fluid domain is a popular method. The rate of improvement is more when it is used highly thermal conductive fluid as heating or cooling medium. In this present study, heat transfer augmentation was investigated numerically by implementing corrugation in the fluid domain and nanofluid as the base fluid in the turbulent forced convection regime. Finite volume method (FVM) was applied to solve the continuity, momentum and energy equations. All the numerical simulations were considered for single phase flow. A rectangle corrugated pipe with 5000 W/m2 constant heat flux subjected to the corrugated wall was considered as the fluid domain. In the range of Reynolds number 15000 to 40000, thermo-physical and hydrodynamic behavior was investigated by using CuO-water nanofluid from 1% to 5% volume fraction as the base fluid through the corrugated fluid domain. Corrugation justification was performed by changing the amplitude of the corrugation and the corrugation wave length for obtaining the increased heat transfer rate with minimum pumping power. For using CuO-water nanofluid, augmentation was also found more in the rectangle corrugated pipe both in heat transfer and pumping power requirement with the increase of Reynolds number and the volume fraction of nanofluid. For the increased pumping power, optimization of pumping power by using nanofluid was also performed for economic finding.

  15. Axisymmetrical electric vortex flow in a corrugated pipe

    Energy Technology Data Exchange (ETDEWEB)

    Freyberg, Ya.Zh.; Shcherbinin, E.V.

    1977-10-01

    The calculation of electric vortex flows, i.e., flows of an electrically conducting fluid arising as a result of the interaction of an electric current with the natural magnetic field, can be begun by constructing the electromagnetic force. The simplest means for constructing the electromagnetic force is to use certain harmonics of the basic equation. This article analyzes a solution of the equation which is periodic with respect to z. An effect is observed which is similar to the phenomenon, well-known in the mechanics of solids, in which the force of friction and the moment applied to a body is significant in generating the motion, in spite of the fact that the total force acting on the supporting element (the pipe in this case) is equal to zero, as for example the rolling motion of a coil in the direction opposite to the force applied to the winding. 7 references, 5 figures.

  16. Experiments on the influence of low frequency sound on the acoustic resonances in a corrugated flow pipe

    CERN Document Server

    Kristiansen, Ulf R; Pinhède, Cédric; Amielh, Muriel

    2010-01-01

    It is well known that an air flow in a corrugated pipe might excite the longitudinal acoustic modes of the pipe. In this letter is reported experiments where a low frequency, oscillating flow with velocity magnitudes of the same order as the air flow has been added. Depending on the oscillation strength, it might silence the pipe or move the resonances to higher harmonics. It is also shown that a low frequency oscillation by itself might excite a higher frequency acoustic resonance of the pipe.

  17. Response of reinforced concrete and corrugated steel pipes to surface load

    Science.gov (United States)

    Lay, Geoff R.

    Full-scale simulated live load tests were conducted in a controlled laboratory setting using a single-axle frame on 600-mm-inner-diameter reinforced concrete pipe (RCP) and corrugated steel pipe (CSP) when buried in dense, well-graded sand and gravel. Measurements of the RCP at nominal and working forces and beyond are reported for 0.3, 0.6 and 0.9 m of soil cover above the pipe crown. The RCP experienced no cracking when buried at 0.3 m under nominal and working CL-625 and CL-800 single-axle design loads. At these loads, the vertical contraction of the pipe diameter was less than 0.08 and 0.10 mm and the largest tensile strains in the pipe were 75 and 100 muepsilon (50-60% of the cracking strain), respectively. A 0.15 (+/-0.05)-mm-wide axial crack developed at the inner crown in the presence of a 6 kNm/m circumferential bending moment (70% of the theoretical ultimate moment capacity) at the fully factored CL-625 load. This crack did not propagate or widen from 3 series of cyclic load-unload tests. At 1300 kN of applied load the change in pipe diameter was less than 3.5 mm. Increasing soil cover from 0.3 to 0.6 to 0.9 m reduced the circumferential crown bending moment from 6.0 to 3.9 to 2.1 kNm/m, respectively, at 400 kN of axle load. A 1.6- and a 2.8-mm-thick CSP were also subjected to axle loading. No yielding or limit states occurred in the 1.6-mm-thick CSP when buried 0.9-m-deep. However, at 0.6 m of cover a 300 kN axle load caused local yielding at the pipe crown. Increasing soil cover from 0.6 to 0.9 m decreased the vertical diameter change from -3.0 to -1.2 mm and the crown bending moment from 0.7 to 0.2 kNm/m (75% and 20% of the yield moment), respectively, at a 250 kN axle load. Deflections of the thicker CSP were less than the thinner pipe below the CL-625 single-axle load, however further increases in applied load produced a greater response in the thicker pipe, likely due to a haunch support issue. Shallow axle loading produced a greater 3-dimensional

  18. The construction of HDPE double wall corrugated pipe%HDPE 双壁波纹管的施工

    Institute of Scientific and Technical Information of China (English)

    邢东博

    2014-01-01

    简述了 HDPE 双壁波纹管的优点,从管道基础及沟槽开挖、管道安装、修补、闭水试验、连接、回填六方面出发,对 HDPE 双壁波纹管施工工序及要点作了全面的阐述,以最大限度地发挥该管材的作用。%This paper discussed simply the advantages of HDPE double wall corrugated pipe,from the pipeline foundation and trench excavation, pipeline installation,repair,closed water test,connection,backfill six aspects,fully elaborated the HDPE double wall corrugated pipe construc-tion process and main points,in order to maximize the role of pipe material.

  19. Acoustic damping in smooth and corrugated pipes with and without liquid injection

    NARCIS (Netherlands)

    Golliard, J.; Belfroid, S.P.C.; Vijlbrief, O.

    2013-01-01

    From previous experiments, it was shown that small quantities of liquids reduce or eliminate the singing phenomenon in corrugated tubes. The singing mitigation was attributed to filling up of the corrugations, interference with the boundary layer or due to the increased acoustic damping. To evaluate

  20. Effect of truck position and multiple truck loading on response of long-span metal culverts

    National Research Council Canada - National Science Library

    Elshimi, Tamer M; Brachman, Richard W.I; Moore, Ian D

    2014-01-01

    .... This paper shows results of three-dimensional finite element analysis, employing orthotropic shell theory and explicitly modeling the geometry of corrugated plates for a specific box culvert tested...

  1. Brook trout passage performance through culverts

    Science.gov (United States)

    Goerig, Elsa; Castro-Santos, Theodore R.; Bergeron, Normand

    2016-01-01

    Culverts can restrict access to habitat for stream-dwelling fishes. We used passive integrated transponder telemetry to quantify passage performance of >1000 wild brook trout (Salvelinus fontinalis) attempting to pass 13 culverts in Quebec under a range of hydraulic and environmental conditions. Several variables influenced passage success, including complex interactions between physiology and behavior, hydraulics, and structural characteristics. The probability of successful passage was greater through corrugated metal culverts than through smooth ones, particularly among smaller fish. Trout were also more likely to pass at warmer temperatures, but this effect diminished above 15 °C. Passage was impeded at higher flows, through culverts with steep slopes, and those with deep downstream pools. This study provides insight on factors influencing brook trout capacity to pass culverts as well as a model to estimate passage success under various conditions, with an improved resolution and accuracy over existing approaches. It also presents methods that could be used to investigate passage success of other species, with implications for connectivity of the riverscape.

  2. Wireless remote control small robot for pipe culvert detection%用于管涵探查的无线遥控小型机器人

    Institute of Scientific and Technical Information of China (English)

    郑贵林; 刘丽莎

    2015-01-01

    reasonable design ,STIR has compact mechanical structure ,perfect function and strong drive power and ability to cross obstacles .According to flexible and transparent way of remote control and monito‐ring ,the STIR is easy to manipulate .With the small turning radius which is only 20 cm ,the STIR can detect the tunnels whose diameter is from 30 to 100 cm .The highest vertical obstacle that STIR can overcome is 7 cm .Besides ,its maximum walking speed is 10m/min and the depth of draft is 30 cm . Within a radius of 400 m ,the STIR can be controlled wirelessly and effectively .After the charge , STIR can detection continuously for 120 min at a time .In a word ,the clear and three‐dimensional sur‐veying for the internal state of water culvert ,pipeline and underground cable pipe can be completed by STIR .It is able to carry out the jobs such as hidden trouble detection and quality evaluation .STIR is a stable and reliable probing equipment ,which provides powerful means for effective detection of the small pipe culvert .

  3. Bottom ash from fluidising bed boilers as filler material in district heating pipe culverts. Chemical and geotechnical characterisation; Pannsand som kringfyllnadsmaterial foer fjaerrvaermeroergravar. Kemisk och geoteknisk karaktaerisering av fluidbaeddsand

    Energy Technology Data Exchange (ETDEWEB)

    Pettersson, Roger; Rogbeck, Jan; Suer, Pascal

    2004-01-01

    Bottom ashes from fluid bed boilers have been characterised, both geotechnically and chemically, in order to investigate the possibility to use them as filler material in district heating pipe culverts. Bottom ashes from both biofuel boilers and waste boilers are represented in this project. The companies which ashes have been characterised are Sundsvall Energi AB, Sydkraft OestVaerme AB, Sydkraft MaelarVaerme AB, Eskilstuna Miljoe och Energi, Stora Enso Fors, Soederenergi and Fortum Vaerme. A total of ten ashes have been analysed where three ashes originates from Sundsvall Energi AB, two from Sydkraft OestVaerme AB and one from the each of the remaining companies. The chemical analyses have been performed both on fresh ashes and on ashes aged for three months. The geotechnical analyses performed are grain size distribution, packing abilities and permeability. Chemical analyses performed are total content, available content, leaching tests (leaching both by shaking method and column procedure) and organic analyses (PAH, EOX, TOC, dioxin and fenol). The geotechnical analyses show that the ashes fulfils the demands that are put on the filler material used in district heating pipe culverts. When using the ashes in applications, light compaction should be performed due to the risk of crushing the material which may cause an increased amount of fine material. The leachability of fine material is larger than for coarse material. The ashes are relatively insensitive to precipitation. Bio fuel based bottom ashes have a lower content of environmental affecting substances than waste fuel based ashes. This is also shown in the leaching analyses. The leaching water from fresh ashes contains a higher concentration of leachable components than aged ashes. When aged the pH in the ashes decreases due to carbon uptake and hydration and this makes metals as Pb, Cu, Cr and Zn less mobile. On the other hand, an increase in leachability of Sb, Mo and SO{sub 4} is shown when the ashes

  4. RESEARCH ON AUTOMATIC MONITORING TECHNIQUE OF PIPE REPLACED BY BOX CULVERT JACKING PROCESS%箱涵顶进置换管幕顶推过程自动测量技术研究

    Institute of Scientific and Technical Information of China (English)

    潘国荣; 宋蕴璞; 李怀锋; 张鹏

    2012-01-01

    结合上海金山既有铁路下顶进公路箱涵工程,介绍以自动全站仪为主的智能导向系统的原理及关键技术.实用表明,该系统在实际施工中具有可靠性强、系统运行稳定、测量精度高的特点,可以在恶劣的施工环境中正常运行.%Automatic real - time guidance measurement is the key to modern construction measurement. Nowa-days, in China the new underground 3D traffic engineering method of pipe replaced by box culvert jacking is used, but the manual measurement can not meet the requirement of real-time monitoring. So a set of Total Station-based intelligent automatic guidance system has been developed thus could achieve the measurement automatically and im-prove work efficiency greatly. The principle and key technology of this intelligent guidance system is introduced. In the same time, combined with successful application of culvert jacking highway in the existing railway project in Shanghai Jinshan, this system proved practical and excellent with higher reliability and accuracy.

  5. Box Culvert Design

    OpenAIRE

    Susong, John; Beakley, Josh; Smart, Steve

    2014-01-01

    Precast box culverts can be used to quickly solve many challenging drainage problems. This presentation will review how box culverts are specified and designed. Various examples will be used to demonstrate the proper installation techniques and multiple applications for a successful project. Topics will include standard specifications; considerations for live, dead and construction loadings; installation (site preparation, bedding, placement, joint treatment and backfill); and applications (c...

  6. Mussel Spat Ropes Assist Redfin Bully Gobiomorphus huttoni Passage through Experimental Culverts with Velocity Barriers

    Directory of Open Access Journals (Sweden)

    Jonathan D. Tonkin

    2012-09-01

    Full Text Available The application of mussel spat rope for enabling the passage of redfin bully Gobiomorphus huttoni through culverts, which create velocity barriers, was trialled in the laboratory. No fish were able to access the un-roped control pipes whereas 52% successfully negotiated the pipes in the rope treatments. The success of fish ascending treatment pipes suggests mussel spat rope may be effective for enabling the passage of this and other similar fish species through otherwise impassable culverts with velocity barriers.

  7. Experimental studies of Steel Corrugated Constructions

    Directory of Open Access Journals (Sweden)

    Lazarev Yuriy

    2016-01-01

    Full Text Available The purpose of this particular article is to assess existing calculations of steel corrugated constructions. Steel Corrugated Construction is a perspective type of constructions, which is exhibiting numerous advantages in comparison with one that currently applied in automobile and railroad networks (reinforced concrete water-throughput pipes, reinforced concrete frame bridges. The evaluation of experimental data on models of constructions of this particular type has been carried out in order to improve calculations of Steel Corrugated Constructions.

  8. THE EFFECT OF CORRUGATED ELEMENTS THICKNESS ON THE DEFLECTED MODE OF CORRUGATED METAL STRUCTURES

    Directory of Open Access Journals (Sweden)

    V. V. Kovalchuk

    2015-06-01

    Full Text Available Purpose. The work provides research the deflected mode and calculation the relative deformation of vertical and horizontal diameters of corrugated metal structures (CMS, horizontal ellipse type, and cross section in their interaction with soil backfill depending on the thickness of corrugated metal pipe. Such studies are required for optimal design of CMS, establishing the causes of defects timely, appropriate engineering solutions to improve the bearing capacity of the CMS and reasonable use of funds for their construction or rehabilitation of existing transportation facilities using corrugated metal pipes. Methodology. Stresses and stability calculations of CMS form are conducted using the developed mathematical algorithm in program environment Mathcad 14. In these studies different thickness of corrugated metal pipe were assigned, and further calculations were carried out at the design value of backfill soil compaction degree and magnitude of dynamic loading of railway transport. Findings. From the calculations is determined that the most influence the thickness of the corrugated metal pipe has on the strength in the calculation of the normal stresses and value of the vertical pipe strains. Therefore, the calculated parameters in the design of corrugated metal structures with small filling heights (from 1.2 m to 3 m above its peak is calculation of the strength by the normal stresses and determination of the vertical deformation of the pipe. Originality. For the first time, calculations of the deflected mode and relative deformations of vertical and horizontal cross-sectional diameters of CMS, horizontal ellipse type in the interaction with soil backfill. The factors complex was taken into account the backfill soil compaction degree, the value of dynamic loading of railway transport and different thickness of corrugated metal pipe. Practical value. The results of the deflected mode of corrugated metal structures such as horizontal ellipse of

  9. Acoustical studies on corrugated tubes

    Science.gov (United States)

    Balaguru, Rajavel

    Corrugated tubes and pipes offer greater global flexibility combined with local rigidity. They are used in numerous engineering applications such as vacuum cleaner hosing, air conditioning systems of aircraft and automobiles, HVAC control systems of heating ducts in buildings, compact heat exchangers, medical equipment and offshore gas and oil transportation flexible riser pipelines. Recently there has been a renewed research interest in analyzing the flow through a corrugated tube to understand the underlying mechanism of so called whistling, although the whistling in such a tube was identified in early twentieth century. The phenomenon of whistling in a corrugated tube is interesting because an airflow through a smooth walled tube of similar dimensions will not generate any whistling tones. Study of whistling in corrugated tubes is important because, it not only causes an undesirable noise problem but also results in flow-acoustic coupling. Such a coupling can cause significant structural vibrations due to flow-acoustic-structure interaction. This interaction would cause flow-induced vibrations that could result in severe damage to mechanical systems having corrugated tubes. In this research work, sound generation (whistling) in corrugated tubes due to airflow is analyzed using experimental as well as Computational Fluid Dynamics-Large Eddy Simulation (CFD-LES) techniques. Sound generation mechanisms resulting in whistling have been investigated. The whistling in terms of frequencies and sound pressure levels for different flow velocities are studied. The analytical and experimental studies are carried out to understand the influence of various parameters of corrugated tubes such as cavity length, cavity width, cavity depth, pitch, Reynolds numbers and number of corrugations. The results indicate that there is a good agreement between theoretically calculated, computationally predicted and experimentally measured whistling frequencies and sound pressure levels

  10. Application of a multistate model to estimate culvert effects on movement of small fishes

    Science.gov (United States)

    Norman, J.R.; Hagler, M.M.; Freeman, Mary C.; Freeman, B.J.

    2009-01-01

    While it is widely acknowledged that culverted road-stream crossings may impede fish passage, effects of culverts on movement of nongame and small-bodied fishes have not been extensively studied and studies generally have not accounted for spatial variation in capture probabilities. We estimated probabilities for upstream and downstream movement of small (30-120 mm standard length) benthic and water column fishes across stream reaches with and without culverts at four road-stream crossings over a 4-6-week period. Movement and reach-specific capture probabilities were estimated using multistate capture-recapture models. Although none of the culverts were complete barriers to passage, only a bottomless-box culvert appeared to permit unrestricted upstream and downstream movements by benthic fishes based on model estimates of movement probabilities. At two box culverts that were perched above the water surface at base flow, observed movements were limited to water column fishes and to intervals when runoff from storm events raised water levels above the perched level. Only a single fish was observed to move through a partially embedded pipe culvert. Estimates for probabilities of movement over distances equal to at least the length of one culvert were low (e.g., generally ???0.03, estimated for 1-2-week intervals) and had wide 95% confidence intervals as a consequence of few observed movements to nonadjacent reaches. Estimates of capture probabilities varied among reaches by a factor of 2 to over 10, illustrating the importance of accounting for spatially variable capture rates when estimating movement probabilities with capture-recapture data. Longer-term studies are needed to evaluate temporal variability in stream fish passage at culverts (e.g., in relation to streamflow variability) and to thereby better quantify the degree of population fragmentation caused by road-stream crossings with culverts. ?? American Fisheries Society 2009.

  11. The Monster Sound Pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-01-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which…

  12. Mussel Spat Ropes Assist Redfin Bully Gobiomorphus huttoni Passage through Experimental Culverts with Velocity Barriers

    Directory of Open Access Journals (Sweden)

    Liam A.H. Wright

    2012-09-01

    Full Text Available The application of mussel spat rope for enabling the passage of redfin bully Gobiomorphus huttoni through culverts, which create velocity barriers, was trialled in the laboratory. No fish were able to access the un-roped control pipes whereas 52% successfully negotiated the pipes in the rope treatments. The success of fish ascending treatment pipes suggests mussel spat rope may be effective for enabling the passage of this and other similar fish species through otherwise impassable culverts with velocity barriers.

  13. 薄壁波纹钢管混凝土柱局部屈曲性能研究%Study on the local buckling behavior of thin corrugated steel pipe concrete column

    Institute of Scientific and Technical Information of China (English)

    朱哲清; 高剑平; 罗民

    2014-01-01

    对一种新型的薄壁波纹钢管混凝土柱进行了低周反复荷载作用下滞回性能试验研究,然后利用ABAQUS进行模拟分析,分析了钢板截面宽厚比、长细比、钢板强度、混凝土强度等4个因素对薄壁波纹钢管混凝土柱局部屈曲的影响规律。试验结果表明:薄壁波纹钢管混凝土柱宽厚比、长细比基本与屈曲荷载成反比,钢板强度与屈曲荷载成正比,混凝土强度基本与屈曲荷载无关。%This paper presents an experimental research of hysteretic performance on a new kind of thin wall corrugated steel pipe concrete column under the effects of low cyclic load. The simulation analysis is carried on by ABAQUS towards the influence of such four factors as steel cross-section width-thickness ratio, slenderness ratio, steel strength, concrete strength on the thin wall corrugated steel pipe concrete column local buckling. The main conclusions are as follows: there is an inverse correlation between its width to thickness ratio, slenderness ratio and local buckling load; steel strength is proportional to the load; concrete strength has no effect on the load.

  14. The monster sound pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-03-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which illustrates how an Internet keyboard can be used to estimate the fundamental pitches of each pipe. Since both pipes have similar end corrections, the pitch discrepancy between the smooth pipe and drainage tube is due to the corrugations, which lower the speed of sound inside the flexible tube, dropping its pitch a semitone.

  15. VTrans Small Culvert Inventory - Access Holes

    Data.gov (United States)

    Vermont Center for Geographic Information — Vermont Agency of Transportation Small Culvert Inventory: Access Holes. This data contains access hole locations along VTrans maintained roadways. The data was...

  16. Distributed optic fiber sensors for soil deformation monitoring for construction method of box culverts being pushed to replace pipe roofs%箱涵顶进置换管幕工法土体变形分布式光纤监测研究

    Institute of Scientific and Technical Information of China (English)

    赵洪岩; 张勇; 陈峰军; 顾凯; 张正; 魏广庆; 施斌

    2012-01-01

    The construction method of a box culvert being pushed to replace two pipe roofs is initiated as a city tunnel excavation method in China. This method is complex, and soil deformation is the key factor to test whether the construction method is successful or not and to guarantee the tunnel safety. The soil deformation sensors are introduced based on the distributed fiber sensing technology, their performances are tested in the laboratory, and a three-dimensional deformation monitoring network is designed according to the model tests. The test results and the monitoring data are analyzed. The soil deformation characteristics during the pipe-roofs pushing and box culvert replacement are summarized. This study will play an important role in perfecting the intelligent monitoring system, improving this construction method and analyzing the deformation of engineering soils.%箱涵顶进置换管幕工法是中国新创的城市隧道暗挖方法,施工过程中土体变形情况是检验施工工法成功的关键。针对箱涵顶进置换管幕工法的模型试验过程,设计了基于BOTDR分布式光纤传感技术的土体变形传感器并在室内进行了性能测试,同时根据该工法的施工特点建立了三维变形监测网络。在试验结果和监测数据的基础上,分析了工具管幕推进和箱涵置换工具管幕过程中土体的变形特性,验证了该技术的可行性。试验研究成果对于分布式光纤土体变形监测和完善该施工工法的智能监测系统具有重要意义。

  17. ECOLOGICAL CRITERIA FOR PRIORITIZATION OF CULVERT REPLACEMENT

    Science.gov (United States)

    Culvert passage issues are gaining national and international focus, because they are implicated in the decline of particular species and in the more general loss of biodiversity in freshwater ecosystems. In the Pacific Northwest, inadequate fish passage at culverts is recognized...

  18. DYNAMIC PROPERTIES OF CORRUGATED-PIPE TYPE SALiM VIBRATION ISOLATOR%波纹管式液固混合介质隔振器的动力学特性

    Institute of Scientific and Technical Information of China (English)

    高雪; 陈前; 滕汉东

    2011-01-01

    波纹管式液固混合介质隔振器是一种主要用于低频重载动力机械隔振的新型隔振器,主要由波纹管弹性单元体和多层波纹管容器组成.首先建立了弹性单元体的弹性板壳模型,在考虑波纹管结构几何非线性及内部气体耦合的前提下,利用参数摄动法推导了单元体在外部油压和内部气压共同作用下的非线性轴向刚度.在此基础上,推导了隔振器的轴向刚度,发现刚度具有分段线性一非线性的特点,并且与弹性单元体和波纹管容器的各参数密切相关.进而建立了等效的分段双线性隔振系统的动力学方程,利用平均法与数值仿真分析了隔振系统的非线性频响特性,结果表明系统具有软弹簧特性,而主共振稳态幅值关于频率的分岔会导致幅值跳跃现象的出现.%Corrugated-pipe type solid and liquid mixture vibration isolator (SALiM) is a new type of isolator for vibration isolation of heavy equipment with low frequency. Firstly, this paper establishes the mechanics model of elastic solid elements by introducing plate-shell model. Based on geometry nonlinearity of corrugated-pipe, the stiffness of the element under outer liquid pressure and inner air pressure can be obtained by the perturbation method. Then the stiffness of isolator is derived and analyzed, and as a result, the stiffness is piecewise nonlinear and determined by parameters of the solid elements and corrugated-pipe container. In addition, the equation of motion of a single degree of freedom system is given, which consists of a SALiM vibration isolator and mechanical equipment. The properties of the frequency response function of the system are analyzed using average method which is a classical analytic method for solving nonlinear differential equations. And it is found that this system with SALiM isolator shows softening stiffness behaviour. The jumping phenomenon clearly occurs under certain

  19. Implementation of Structures in the CMS:Part 3, Culvert

    Science.gov (United States)

    2013-08-01

    describes the mathematical formulation and numerical implementation of a culvert in the Coastal Modeling System ( CMS ) operated through the Surface...wetland application in Chesapeake Bay, Maryland. Figure 1. (a) Circular culvert, and (b) rectangular culvert. COASTAL MODELING SYSTEM : The CMS ...this application the same CMS model was adopted, culvert structures configured in the system , and a 50-day simulation was conducted. The

  20. Singing mitigation in corrugated tubes with liquid injection

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Golliard, J.; Vijlbrief, O.

    2013-01-01

    Pipes with a corrugated inner surface, as used in flexible pipes for gas production and transport, can generate a high amplitude tonal sound (singing). Small quantities of liquid can result in a significant amplitude reduction or total mitigation of this sound production. To evaluate different poten

  1. VT Short Structures - Bridges and Culverts

    Data.gov (United States)

    Vermont Center for Geographic Information — Inspection data for structures (bridge and culvert) between 6 feet and 20 feet in length inspected on State road system. Stewards: Information Technology, Data...

  2. VT Long Structures - Bridges and Culverts

    Data.gov (United States)

    Vermont Center for Geographic Information — Inspection data for structures (bridge and culvert) greater than 20 feet in length inspected on both State and local road systems. Stewards: Information Technology,...

  3. VT Short Structures - Bridges and Culverts

    Data.gov (United States)

    Vermont Center for Geographic Information — Inspection data for structures (bridge and culvert) between 6 feet and 20 feet in length inspected on State road system. Stewards: Information Technology, Data...

  4. Making Culverts Great Again: Modeling Road Culvert Vulnerability to Assist Prioritization of Local Infrastructure Investment

    Science.gov (United States)

    Gold, D.; Walter, M. T.; Watkins, L.; Kaufman, Z.; Meyer, A.; Mahaney, M.

    2016-12-01

    The concurrent threats posed by climate change and aging infrastructure have become of increasing concern in recent years. In the Northeastern US, storms such as Hurricane Irene and Super Storm Sandy have highlighted the vulnerability of infrastructure to extreme weather events, which are projected to become more frequent under future climate change scenarios. Road culverts are one type of infrastructure that is particularly vulnerable to such threats. Culverts allow roads to safely traverse small streams or drainage ditches, and their proper design is critical to ensuring a safe and reliable transportation network. Much of the responsibility for designing and maintaining road culverts lies at the local level, but many local governments lack the resources to quantify the vulnerability of their culverts to major storms. This study contributes a model designed to assist local governments in rapidly assessing the vulnerability of large numbers of culverts and identifies common characteristics of vulnerable culverts. Model inputs include culvert geometry and location data collected by trained local field teams. The model uses custom tools created in ArcGIS and Python to determine the maximum return period storm that each culvert can safely convey under current and projected future rainfall regimes. As a demonstration, over 1000 culverts in New York State were modeled. It was found that a significant percentage of modeled culverts failed to convey the current 5 year return period storm event (deemed a failure) and this percentage increased under projected future rainfall conditions. The model results were analyzed to determine correlations between culvert characteristics and failure. Characteristics investigated included watershed size, road type (state, county or local), affluence of the surrounding area and suitability for aquatic organism passage. Results from this study can be used by local governments to quantify and characterize the vulnerability of current

  5. Study of Scour Downstream Different Shapes of Culverts

    Directory of Open Access Journals (Sweden)

    Ibrahem Adel Al Hafed

    2013-04-01

    Full Text Available In this research a laboratory study was carried out to investigate the scour phenomenon in sandy soil beds downstream different shapes of culverts, Four   shapes of culverts such as circular, ellipse, rectangular and square were used. So, a best hydraulic section was used in rectangular and ellipse shapes. The study includes the measurement and comparison of maximum scour depth and length of scour hole downstream these different shapes of culverts. Also, the distribution of soil parts was studied. It was used five discharges for each one of culvert.              Laboratory results of this study showed that the minimum depth of scour in the same discharge occurred downstream ellipse culvert and then rectangular culvert and then square culvert and the last circular culvert.  

  6. Sediment concentration and turbidity changes during culvert removals

    Science.gov (United States)

    Randy B. Foltz; Kristina A. Yanosek; Timothy M. Brown

    2008-01-01

    The concentrations of sediment and turbidity in stream water were monitored during culvert removals to determine the short term effects of road obliteration. Sediment concentration was measured at 11 stream crossings among two locations in Idaho and one in Washington. Sediment concentration immediately below the culvert outlet exceeded levels above the culvert outlet...

  7. Road Bridges and Culverts, MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key Bridge, Bay bridge, Nice Bridge, Published in 2010, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

    Data.gov (United States)

    NSGIC State | GIS Inventory — Road Bridges and Culverts dataset current as of 2010. MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key...

  8. Aeroacoustics of the swinging corrugated tube: Voice of the Dragon

    NARCIS (Netherlands)

    Nakiboglu, G.; Rudenko, O.; Hirschberg, Abraham

    2012-01-01

    When one swings a short corrugated pipe segment around one’s head, it produces a musically interesting whistling sound. As a musical toy it is called a “Hummer” and as a musical instrument, the “Voice of the Dragon.” The fluid dynamics aspects of the instrument are addressed, corresponding to the

  9. Size and Placement of Metal Culverts Critical on Peatland Woods Roads

    Science.gov (United States)

    J.H. Stoeckeler

    1967-01-01

    Culverts too small in diameter or poorly placed were major causes of timber flooding and tree damage. Placement problems were poor culvert slope, poor hydraulic approach, lack of gravel bedding, and too little soil covering the culverts.

  10. Town Bridge and Culvert Inventories - Web Mapping App

    Data.gov (United States)

    Vermont Center for Geographic Information — VTCULVERTS.org web mapping application. Town bridge and culvert inventories currently collected by the RPCs (Regional Planning Commissions), towns, and their...

  11. Improvement activities to soil stabilization near Bolivia-Brazil gas pipeline crossing through an embankment over a corrugated drainage pipe, at Km 247 in Mato Grosso do Sul, Brazil; Melhorias para estabilidade do gasoduto Bolivia-Brasil em cruzamento de aterro sobre tubo de drenagem tipo ARMCO, no km 247 em Mato Grosso do Sul

    Energy Technology Data Exchange (ETDEWEB)

    Jorge, Kemal Vieira [TBG - Transportadora Brasileira Gasoduto Bolivia Brasil S.A., Rio de Janeiro, RJ (Brazil); Costa, Cesar Augusto [TBG - Transportadora Brasileira Gasoduto Bolivia Brasil S.A., Campo Grande, MS (Brazil). Gerencia Regional Centro Oeste (CRGO)

    2005-07-01

    A hundred and seventy kilometers from Campo Grande city, on Mato Grosso do Sul State, the Brasil-Bolivia Gas Pipeline crosses a 8,5 meters high landfill, over a drainage systems made of a 2,8 meters of diameter corrugated pipe. This drainage pipe was installed to allow the drainage of the valley, and the landfill above it was built so the Gas pipeline could cross easier the 80 meters deep and 30 degree vertices valley. This paper illustrates the work tasks and solutions taken to monitor and guarantee the integrity of the drainage and landfill structures, as well as the integrity of the Gas Pipeline. Some of the work tasks illustrated are the investigation of the support conditions of the Gas Pipeline, the analysis of a drainage system under the pipeline, on a rocky soil, the analysis of the stability of the landfill, the construction of a gravity retaining walls and the monitoring of the deformations on the drainage pipe. (author)

  12. Fish Movement Ecology in High Gradient Headwater Streams: Its Relevance to Fish Passage Restoration through Stream Culvert Barriers

    Science.gov (United States)

    Hoffman, Robert L.; Dunham, Jason B.

    2007-01-01

    Executive Summary Restoration of fish passage through culvert barriers has emerged as a major issue in the Pacific Northwest and nationwide. The problem has many dimensions, including the huge number of potential barriers, uncertainty about which structures are actually barriers, the benefits and risks involved with restoration, and the financial costs and timelines. This report attempts to address what we call 'thinking outside of the pipe' in terms of fish passage information needs. This means understanding the value of each potential passage restoration project in the context of other possible projects, and to view individual restoration projects within a larger landscape of habitats and population processes. In this report we provide a brief review of some essential characteristics of animal movement and examples from a focal group of fishes in Washington State: salmon, trout, and char. While several other fishes and many other species use streams where culvert passage barriers may occur, it is the salmonids that are by far the most widespread and in most cases extending furthest into the headwaters of stream networks in Washington. We begin this report by outlining some basic characteristics of animal movement and then apply that foundation to the case of salmonid fishes. Next we consider the consequences of disrupting fish movement with human-constructed barriers, such as culverts. Finally, this body of evidence is summarized and we propose a short list of what we view as high priority information needs to support more effective restoration of fish passage through culverts.

  13. Field Experience with Lock Culvert Valves

    Science.gov (United States)

    2013-12-01

    interesting accounts regarding their lock culvert valves. ST. LAWRENCE SEAWAY Eisenhower and Snell Locks. The valves on the Eisenhower and Snell Locks...Tainter Valve Design Lift, ft Eisenhower St. Lawrence Seaway 80 x 860 12 x 14 21.0 DSP 43 Snell St. Lawrence Seaway 80 x 860 12 x 14 21.0 3 DSP, 1 VF 49...vertical-frame valves were furnished to the SLSDC in January 2011, and one was installed in the south filling-valve location at Snell Lock. An option

  14. Effect of corrugated characteristics on the liquid nitrogen temperature field of HTS cable

    Science.gov (United States)

    Li, Z. M.; Li, Y. X.; Zhao, Y. Q.; Gao, C.; Qiu, M.; Chen, G. F.; Gong, M. Q.; Wu, J. F.

    2014-01-01

    In the high temperature superconducting (HTS) cable system, liquid nitrogen is usually chosen to be the coolant because of its low saturation temperature and large latent heat of vaporization. Thus, it is very important for superconducting cables that the liquid nitrogen temperature field keeps stable. However, the cryostat is usually made of flexible corrugated pipes and multi-layer insulation materials. The characteristics (e.g. wave pitch and wave depth) of corrugated pipes may have an effect on the heat exchange between cable and liquid nitrogen, even the whole temperature field of liquid nitrogen. In this paper, a two-dimensional model for 30 m long HTS cable has been modified to analyze the effect of corrugated characteristics on the temperature field of liquid nitrogen. The liquid nitrogen temperature difference between the outlet and the inlet of passage gradually increases as the wave pitch of the corrugated tube decreases and the wave depth increases.

  15. Complementary experiments for hydraulic modeling of multi-box culverts

    National Research Council Canada - National Science Library

    Ho, H.-C; Muste, M; Plenner, S; Firoozfar, A.R

    2013-01-01

    ... flow–sediment interaction. This paper reports results from a series of laboratory experiments aimed at understanding the hydro and morpho-dynamic changes occurring in the vicinity of a three-box culvert...

  16. Necropsy Report - Eaastern Pipistrelle Box Culvert I-55 Grenada, MS

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Necropsy report of a eastern pipisttrelle (tri-colored bat) found dead in a box culvert along I-55, near Grenada, MS provides no indication of white-nose syndrome.

  17. Town Bridge and Culvert Inventories - Export-Structures App Tool

    Data.gov (United States)

    Vermont Center for Geographic Information — VTCULVERTS.org app tool for exporting town bridge and culvert inventories that are currently collected by the RPCs (Regional Planning Commissions), towns, and their...

  18. Dealing With Uncertainty When Assessing Fish Passage Through Culvert Road Crossings

    Science.gov (United States)

    Anderson, Gregory B.; Freeman, Mary C.; Freeman, Byron J.; Straight, Carrie A.; Hagler, Megan M.; Peterson, James T.

    2012-09-01

    Assessing the passage of aquatic organisms through culvert road crossings has become increasingly common in efforts to restore stream habitat. Several federal and state agencies and local stakeholders have adopted assessment approaches based on literature-derived criteria for culvert impassability. However, criteria differ and are typically specific to larger-bodied fishes. In an analysis to prioritize culverts for remediation to benefit imperiled, small-bodied fishes in the Upper Coosa River system in the southeastern United States, we assessed the sensitivity of prioritization to the use of differing but plausible criteria for culvert impassability. Using measurements at 256 road crossings, we assessed culvert impassability using four alternative criteria sets represented in Bayesian belief networks. Two criteria sets scored culverts as either passable or impassable based on alternative thresholds of culvert characteristics (outlet elevation, baseflow water velocity). Two additional criteria sets incorporated uncertainty concerning ability of small-bodied fishes to pass through culverts and estimated a probability of culvert impassability. To prioritize culverts for remediation, we combined estimated culvert impassability with culvert position in the stream network relative to other barriers to compute prospective gain in connected stream habitat for the target fish species. Although four culverts ranked highly for remediation regardless of which criteria were used to assess impassability, other culverts differed widely in priority depending on criteria. Our results emphasize the value of explicitly incorporating uncertainty into criteria underlying remediation decisions. Comparing outcomes among alternative, plausible criteria may also help to identify research most needed to narrow management uncertainty.

  19. New culvert under the Rhine near Worms assures energy and water supplies; Neuer Rheindueker bei Worms sichert Energie- und Wasserversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Rink, W. [Buderus Giesserei Wetzlar, Wetzlar (Germany); Schoepwinkel, R.; Maue, T. [EWR Netz GmbH, Worms (Germany); Muenster, V.; Vranjes, S. [Sax und Klee GmbH, Mannheim (Germany)

    2008-03-15

    In 2007, EWR Netz GmbH awarded a contract for a new culvert under the Rhine for long-term assurance of energy and water supplies for Worms, the city of the ancient German Nibelungen saga, and for the South Hessian municipalities of Lampertheim and Buerstadt. 'Direct Pipe', a new trenchless construction method, was used for the first time anywhere in the world for the bore under the Rhine. This involved installation of a 464 m long DN 1200 protective steel casing pipe under the bed of the Rhine, traversing silt, sand and gravel. An innovative clamp system was then used to draw a DN 600 drinking-water pipeline and twelve cable conduits into this casing pipe. (orig.)

  20. Towards effective culvert design: monitoring seasonal use and behavior by Mediterranean mesocarnivores.

    Science.gov (United States)

    Serronha, Ana Marta; Mateus, Ana Rita Amaro; Eaton, Finn; Santos-Reis, Margarida; Grilo, Clara

    2013-08-01

    Drainage culverts are known to be used by a diverse number of species. To date, most studies looking at culvert usage have been restricted to the dry season. This seasonal bias has limited our understanding of how different species respond to culverts and, consequently, our ability to find effective ways to promote the use of culverts as aids to species movement. The main goal of this study was to examine the role of highway culverts for mesocarnivores throughout the year. We addressed (1) the seasonality of culvert use, (2) the relative importance of culvert structure, highway features, and surrounding landscape on culvert use, (3) the influence of the water depth and cover on culvert use, and (4) the effect of culvert structure on individual behavior. Fifteen culverts were monitored along 2 highways in southern Portugal using video-surveillance cameras and marble dust for 10 consecutive days per season. We used generalized linear mixed models to determine which factors most affected the culvert use and behavior by mesocarnivores. Our results highlight the effect of seasonality and water on culvert use. Culvert use was positively related with species activity throughout the year. All species (except otters (Lutra lutra)) were less likely to use culverts that contained water more than 3 cm deep or covering more than 70 % of the culvert base. Based on our results, future surveys and culvert retrofit design should address (1) the importance of seasonality in the interpretation of results and (2) the complementarity of culvert-specific features (water, ledges, and naturalization).

  1. Remaining Sites Verification Package for the 100-F-50 Stormwater Runoff Culvert, Waste Site Reclassification Form 2007-001

    Energy Technology Data Exchange (ETDEWEB)

    J. M. Capron

    2008-04-15

    The 100-F-50 waste site, part of the 100-FR-2 Operable Unit, is a steel stormwater runoff culvert that runs between two railroad grades in the south-central portion of the 100-F Area. The culvert exiting the west side of the railroad grade is mostly encased in concrete and surrounded by a concrete stormwater collection depression partially filled with soil and vegetation. The drain pipe exiting the east side of the railroad grade embankment is partially filled with soil and rocks. The 100-F-50 stormwater diversion culvert confirmatory sampling results support a reclassification of this site to no action. The current site conditions achieve the remedial action objectives and corresponding remedial action goals established in the Remaining Sites ROD. The results of confirmatory sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

  2. Remaining Sites Verification Package for the 100-F-50 Stormwater Runoff Culvert, Waste Site Reclassification Form 2007-001

    Energy Technology Data Exchange (ETDEWEB)

    J. M. Capron

    2008-04-15

    The 100-F-50 waste site, part of the 100-FR-2 Operable Unit, is a steel stormwater runoff culvert that runs between two railroad grades in the south-central portion of the 100-F Area. The culvert exiting the west side of the railroad grade is mostly encased in concrete and surrounded by a concrete stormwater collection depression partially filled with soil and vegetation. The drain pipe exiting the east side of the railroad grade embankment is partially filled with soil and rocks. The 100-F-50 stormwater diversion culvert confirmatory sampling results support a reclassification of this site to no action. The current site conditions achieve the remedial action objectives and corresponding remedial action goals established in the Remaining Sites ROD. The results of confirmatory sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

  3. The effects of water flow and temperature on thermal regime around a culvert built on permafrost

    Institute of Scientific and Technical Information of China (English)

    Loriane Prier; Guy Dor; CR Burn

    2014-01-01

    Temperature and water flow through a culvert beneath the Alaska Highway near Beaver Creek, Yukon, were measured at hourly intervals between June and October 2013. These data were used to simulate the effect of the culvert on the thermal regime of the road embankment and subjacent permafrost. A 2-D thermal model of the embankment and permafrost was developed with TEMP/W and calibrated using field observations. Empirical relations were obtained between water tem-peratures at the entrance to the culvert, flow into the culvert, and water temperatures inside the structure. Water temper-atures at the entrance and inside the culvert had a linear relation, while water temperatures inside the culvert and water flow were associated by a logarithmic relation. A multiple linear regression was used to summarize these relations. From this relationship, changes in the flow rate and water temperatures at the entrance of the culvert were simulated to obtain pre-dicted water temperatures in the culvert. The temperatures in the culvert were used in the thermal model to determine their effects on the ground thermal regime near the culvert. Variation of ±10%in water flow rate had no impact on the thermal regime underneath the culvert. Variation of water temperature at the entrance of the culvert had a noticeable influence on the thermal regime. A final simulation was conducted without insulation beneath the culvert. The thaw depth was 30 cm with insulation, and 120 cm without insulation, illustrating the importance of insulation to the ground thermal regime.

  4. A Simple Experiment to Explore Standing Waves in a Flexible Corrugated Sound Tube

    Science.gov (United States)

    Amorim, Maria Eva; Sousa, Teresa Delmira; Carvalho, P. Simeao; Sousa, Adriano Sampaioe

    2011-01-01

    Sound tubes, pipes, and singing rods are used as musical instruments and as toys to perform amusing experiments. In particular, corrugated tubes present unique characteristics with respect to the sounds they can produce; that is why they have been studied so intensively, both at theoretical and experimental levels. Experimental studies usually…

  5. Feasibility of culvert IED detection using thermal neutron activation

    Science.gov (United States)

    Faust, Anthony A.; McFee, John E.; Clifford, Edward T. H.; Andrews, Hugh Robert; Mosquera, Cristian; Roberts, William C.

    2012-06-01

    Bulk explosives hidden in culverts pose a serious threat to the Canadian and allied armies. Culverts provide an opportunity to conceal insurgent activity, avoid the need for detectable surface disturbances, and limit the applicability of conventional sub-surface sensing techniques. Further, in spite of the large masses of explosives that can be employed, the large sensor{target separation makes detection of the bulk explosive content challeng- ing. Defence R&D Canada { Sueld and Bubble Technology Industries have been developing thermal neutron activation (TNA) sensors for detection of buried bulk explosives for over 15 years. The next generation TNA sensor, known as TNA2, incorporates a number of improvements that allow for increased sensor-to-target dis- tances, making it potentially feasible to detect large improvised explosive devices (IEDs) in culverts using TNA. Experiments to determine the ability of TNA2 to detect improvised explosive devices in culverts are described, and the resulting signal levels observed for relevant quantities of explosives are presented. Observations conrm that bulk explosives detection using TNA against a culvert-IED is possible, with large charges posing a detection challenge at least as dicult as that of a deeply buried anti-tank landmine. Because of the prototype nature of the TNA sensor used, it is not yet possible to make denitive statements about the absolute sensitivity or detection time. Further investigation is warranted.

  6. Overlay welding for corrugating roll

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effects of chemical compositions and microstructures on wearability properties of overlaid corrugating roll were studied, and the factors governing the hardness and the wearability of overlaid layer were explored.The results show that the hardness and wearability of the overlaid layer significantly rise with the increase of the mass fraction of various types of eutectic, but the crack-resistance falls. The chief factor governing the hardness of overlaid layer is the matrix microstructure, especially the amount of austenite; and the second is the amount of carbide. The principal factor governing the wearability of overlaid layer is the amount of special carbide, particularly the amount of eutectic; and the second is the hardness of overlaid layer. Meanwhile, high alloying electrodes may cause the gear-surface hardness of corrugating roll to be higher than 63HRc, and may enhance the wearability of the gear-surface of corrugating roll by a factor of 5.63 and 9.08.

  7. Longitudinal habitat disruption in Neotropical streams: fish assemblages under the influence of culverts

    Directory of Open Access Journals (Sweden)

    José Roberto Mariano

    Full Text Available This study assessed differences in fish assemblages existing upstream and downstream two types of culverts, one on each of two different Neotropical streams. We analyzed the composition and structure of the ichthyofauna and tested for spatial patterns. Fish sampling was carried out monthly between November 2009 and October 2010 using different fishing gears. We collected 2,220 fish of 33 species; 901 in stretches of the Lopeí stream - circular culvert and 1,310 in stretches of the Pindorama stream - box culvert. Fish abundance was similar in upstream and downstream stretches of the circular culvert, whereas it was slightly higher in the upstream than downstream stretch for the box culvert. Characiformes predominated in the upstream stretch of both culverts. On the other hand, Siluriformes was abundant in the downstream stretch of the circular culvert, with similar abundance in the stretches of the box culvert. Species richness and diversity (Shannon-Weiner Index were higher in the downstream stretch of the circular culvert, but they were similar in both stretches of the box culvert. The most abundant species were Astyanax altiparanae, A. paranae, A. fasciatus, Ancistrus sp., and Hypostomus sp. The last two species were more abundant in the downstream stretch of the circular culvert, and similar in stretches of the box culvert. Our study indicated variations in the species abundance, richness, and diversity between upstream and downstream stretches in particular of the circular culvert in the Lopeí stream, suggesting that fish movements are restrained more intensively in this culvert, especially for Siluriformes. The drop in the circular culvert outlet probably created passage barriers especially for those fish that has no ability to jump, where downstream erosion could lead to culvert perching. Studies on appropriate road crossing design or installation are fundamental whereas improvements in these structures can restore the connectivity of

  8. Evaluating the Effects of Culvert Designs on Ecosystem Processes in Northern Wisconsin Streams

    Science.gov (United States)

    J. C. Olson; A. M. Marcarelli; A.L. Timm; S.L. Eggert; R.K. Kolka

    2017-01-01

    Culvert replacements are commonly undertaken to restore aquatic organism passage and stream hydrologic and geomorphic conditions, but their effects on ecosystem processes are rarely quantified. The objective of this study was to investigate the effects of two culvert replacement designs on stream ecosystem processes. The stream simulation design, where culverts...

  9. Vulnerabilidade sísmica de box-culverts

    OpenAIRE

    Lopes, Sofia Alexandra Alves

    2012-01-01

    As box-culverts são estruturas com grande aplicação em obras rodoviárias para garantir a continuação de linhas de água existentes, ou como passagens agrícolas. Este trabalho tem como objetivo principal a avaliação dos danos que podem ocorrer em box-culverts devido à ação sísmica, tentando para isso distinguir as situações em que se tem de considerar explicitamente a ação sísmica e quando esta pode ser dispensada.

  10. Flood magnitude and frequency of Main Ditch at the culvert on New Jersey Route 44 and at the Conrail culvert downstream, West Deptford Township, Gloucester County, New Jersey

    Science.gov (United States)

    Barringer, Thomas

    1996-01-01

    The magnitude and frequency of floods at Main Ditch at the culvert on New Jersey Route 44 at milepost 8.3 and at the Conrail culvert 0.21 miles downstream, in West Deptford Township, New Jersey, were determined by using the New Jersey Department of Environmental Protection Special Report 38 method. Flood-magnitude and -frequency estimates, as well as drainage-basin characteristics, are included in this report. The 100-year-flood estimates are 285 cubic feet per second at the culvert on New Jersey Route 44 and 345 cubic feet per second at the Conrail culvert.

  11. RATIONAL STEEL CORRUGATED PROFILE DESIGN

    Directory of Open Access Journals (Sweden)

    V. V. Kachurenko

    2015-08-01

    Full Text Available Purpose. The work sets forth the search results of new, more efficient design solutions for metal silos, namely, the analysis of existing types of profiles cross-section in a steel wall of such silo and development of less material-intensive section of corrugated profile.Methodology. To achieve the set goal there were researched the existing types of capacitive structure profiles and their strain-stress state under the load. The analysis was performed on the results of computational experiments. The prototype object was mathematical computer models. The calculations were made using the finite-element method. For computational experiment there was used the design-computing system Structure CAD for Windows. Findings. In this work there were obtained the data allowing to assess work of the profiles and to find more effective type of cross-section in terms of its material consumption. In the process of joint study of the authors a new type of profile for capacitive structures was developed; it has higher utilization efficiency and the attachment point of individual steel sheets with this type of profile. Both solutions are easy to install, reliable in operation and can be manufactured in the conditions of modern industrial production using standard equipment, materials and components. Originality. A new type of corrugated profile cross-section for steel silo walls was proposed; it has higher load carrying capacity and rigidity and allows reducing the metal thickness without changing the structure carrying capacity that results in material consumption reduction of the whole structure.For this and similar types of profiles there was designed and proposed the attachment point of individual corrugated sheets screwed with extending flange, which enables the unit connection in case of small size corrugations, where the distance is not sufficient to accommodate the bolt cap between the individual corrugations. Practical value.Application of the proposed

  12. Turtles and culverts, and alternative energy development: an unreported but potentially significant mortality threat to the desert tortoise (Gopherus agassizii)

    Science.gov (United States)

    Lovich, J.E.; Ennen, J.R.; Madrak, S.; Grover, B.

    2011-01-01

    Culverts are often used to increase the permeability of roaded landscapes for wildlife, including turtles. Although the benefits of culverts as safe passages for turtles are well documented, under some conditions culverts can entrap them and cause mortality. Here we report a culvert-related mortality in the federally threatened desert tortoise (Gopherus agassizii) at a wind energy facility in California and offer simple recommendations to mitigate the negative effects of culverts for wildlife in general.

  13. Culvert Analysis Program Graphical User Interface 1.0--A preprocessing and postprocessing tool for estimating flow through culvert

    Science.gov (United States)

    Bradley, D. Nathan

    2013-01-01

    The peak discharge of a flood can be estimated from the elevation of high-water marks near the inlet and outlet of a culvert after the flood has occurred. This type of discharge estimate is called an “indirect measurement” because it relies on evidence left behind by the flood, such as high-water marks on trees or buildings. When combined with the cross-sectional geometry of the channel upstream from the culvert and the culvert size, shape, roughness, and orientation, the high-water marks define a water-surface profile that can be used to estimate the peak discharge by using the methods described by Bodhaine (1968). This type of measurement is in contrast to a “direct” measurement of discharge made during the flood where cross-sectional area is measured and a current meter or acoustic equipment is used to measure the water velocity. When a direct discharge measurement cannot be made at a streamgage during high flows because of logistics or safety reasons, an indirect measurement of a peak discharge is useful for defining the high-flow section of the stage-discharge relation (rating curve) at the streamgage, resulting in more accurate computation of high flows. The Culvert Analysis Program (CAP) (Fulford, 1998) is a command-line program written in Fortran for computing peak discharges and culvert rating surfaces or curves. CAP reads input data from a formatted text file and prints results to another formatted text file. Preparing and correctly formatting the input file may be time-consuming and prone to errors. This document describes the CAP graphical user interface (GUI)—a modern, cross-platform, menu-driven application that prepares the CAP input file, executes the program, and helps the user interpret the output

  14. Corrugated Membrane Fuel Cell Structures

    Energy Technology Data Exchange (ETDEWEB)

    Grot, Stephen [President, Ion Power Inc.

    2013-09-30

    One of the most challenging aspects of traditional PEM fuel cell stacks is the difficulty achieving the platinum catalyst utilization target of 0.2 gPt/kWe set forth by the DOE. Good catalyst utilization can be achieved with state-of-the-art catalyst coated membranes (CCM) when low catalyst loadings (<0.3 mg/cm2) are used at a low current. However, when low platinum loadings are used, the peak power density is lower than conventional loadings, requiring a larger total active area and a larger bipolar plate. This results in a lower overall stack power density not meeting the DOE target. By corrugating the fuel cell membrane electrode structure, Ion Power?s goal is to realize both the Pt utilization targets as well as the power density targets of the DOE. This will be achieved by demonstrating a fuel cell single cell (50 cm2) with a twofold increase in the membrane active area over the geometric area of the cell by corrugating the MEA structure. The corrugating structure must be able to demonstrate the target properties of < 10 mOhm-cm2 electrical resistance at > 20 psi compressive strength over the active area, in combination with offering at least 80% of power density that can be achieved by using the same MEA in a flat plate structure. Corrugated membrane fuel cell structures also have the potential to meet DOE power density targets by essentially packaging more membrane area into the same fuel cell volume as compared to conventional stack constructions.

  15. Culverts in paved roads as suitable passages for Neotropical fish species

    Directory of Open Access Journals (Sweden)

    Sergio Makrakis

    Full Text Available Improperly installed or poorly maintained culverts can pose a serious threat to fish by disrupting their habitat and endangering spawning success. Road culverts that are not designed for fish passage frequently can become obstacles. This can be especially problematic for migratory species, but can lead to fragmentation of resident populations as well. This study evaluated 40 culverts of 29 sites within a 25-km radius from Toledo city, Paraná State, southern Brazil, with respect to their likely effects on movement of the local ichthyofauna. We collected data on the shape and length of culverts, culvert material, waterfall height, water column depth, slope, and estimated flow velocity. Culverts were categorized by level of barrier risk for upstream migration: high, medium, low, and impassable, as well as the type of barrier posed (fall height, depth, length and velocity. Most of culverts analyzed were considered potential barriers to fish movement, with 45% classified as impassible, 45% as high risk, 10% as medium risk, and no culverts as low risk. Brazilian culverts as fishways will require additional monitoring and studies to corroborate the premises proposed in the present study. Road culvert projects that are properly built and maintained will be able to simultaneously improve function of roadways and protect fish populations.

  16. A Simple Experiment to Explore Standing Waves in a Flexible Corrugated Sound Tube

    Science.gov (United States)

    Amorim, Maria Eva; Sousa, Teresa Delmira; Carvalho, P. Simeão; Sousa, Adriano Sampaioe

    2011-09-01

    Sound tubes, pipes, and singing rods are used as musical instruments and as toys to perform amusing experiments. In particular, corrugated tubes present unique characteristics with respect to the sounds they can produce; that is why they have been studied so intensively, both at theoretical and experimental levels.1-4 Experimental studies usually involve expensive and sophisticated equipment that is out of reach of school laboratory facilities.3-6 In this paper we show how to investigate quantitatively the sounds produced by a flexible sound tube corrugated on the inside by using educational equipment readily available in school laboratories, such as the oscilloscope, the microphone, the anemometer, and the air pump. We show that it is possible for students to study the discontinuous spectrum of sounds produced by a flexible corrugated tube and go even further, computing the speed of sound in air with a simple experimental procedure.

  17. Chaotic ray propagation in corrugated layers

    Directory of Open Access Journals (Sweden)

    M. Bottiglieri

    2005-01-01

    Full Text Available The aim of this paper is to study the effects of a corrugated wall on the behaviour of propagating rays. Different types of corrugation are considered, using different distributions of the corrugation heights: white Gaussian, power law, self-affine perturbation. In phase space, a prevalent chaotic behaviour of rays, and the presence of a lot of caustics, are observed. These results entail that the KAM theorem is not fulfilled.

  18. Centrifugal and Analytical Modeling of a Buried Flexible Culvert.

    Science.gov (United States)

    1985-10-31

    buckling (Allgood et al., 1968, Luscher 1966, Whitman et al., 1962). Since the failure mode of the culvert is controlled by the geometry and the...University, December. Luscher , U. (1966): "Buckling of Soil-Surrounded Tubes". Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 92, No. SM6...1960, pp. 389-397 Whitman, R.V. and Luscher . U. (1962): "Basic Experiment of Soil-Structure Interaction", Journal of the Soil Mechanics and Foundations

  19. Pressure drop and stability of flow in Archimedean spiral tube with transverse corrugations

    Directory of Open Access Journals (Sweden)

    Đorđević Milan

    2016-01-01

    Full Text Available Isothermal pressure drop experiments were carried out for the steady Newtonian fluid flow in Archimedean spiral tube with transverse corrugations. Pressure drop correlations and stability criteria for distinguishing the flow regimes have been obtained in a continuous Reynolds number range from 150 to 15 000. The characterizing geometrical groups which take into account all the geometrical parameters of Archimedean spiral and corrugated pipe has been acquired. Before performing experiments over the Archimedean spiral, the corrugated straight pipe having high relative roughness e/d = 0.129 of approximately sinusoidal type was tested in order to obtain correlations for the Darcy friction factor. Insight into the magnitude of pressure loss in the proposed geometry of spiral solar receiver for different flow rates is important because of its effect upon the efficiency of the receiver. Although flow in spiral and corrugated geometries has the advantages of compactness and high heat transfer rates, the disadvantage of greater pressure drops makes hydrodynamic studies relevant. [Projekat Ministarstva nauke Republike Srbije, br. III 42006 i br. TR 33015

  20. Dynamic testing of railway metal culvert using geodetic methods

    Directory of Open Access Journals (Sweden)

    Beben Damian

    2017-01-01

    Full Text Available The objective of the study was to compare and assess suitability of two methods of geodetic measurements (tachymetry i interferometry used to determine changes of the geometric condition of building and engineering structures. The paper presents the selected results of experimental tests under dynamic loads that were conducted on a railway metal culvert. The dynamic loads were caused by the passages of various trains. The measurements were made for all trains which had been running over the culvert during a 24 hour period. Advantages and disadvantages of both applied methods were characterized. The disadvantage of the tachymetry method is the discreteness of measurements and the lack of the possibility of verifying the results after finishing the field works. The tachymetry measurements were conducted using precise tachymetry manufactured by Leica TC2002. The IBIS microwave coherent radar was used in the interferometry method. Moreover, a special microwave horns IBIS-H23 type with a maximum gain of 23 dBi were used as the interferometer antennas (transmitting and receiving. Conclusions drawn from the tests can be helpful in the measurements of such culverts.

  1. Culverts in paved roads as suitable passages for Neotropical fish species

    OpenAIRE

    Sergio Makrakis; Theodore Castro-Santos; Maristela Cavicchioli Makrakis; Ricardo Luiz Wagner; Maurício Spagnolo Adames

    2012-01-01

    Improperly installed or poorly maintained culverts can pose a serious threat to fish by disrupting their habitat and endangering spawning success. Road culverts that are not designed for fish passage frequently can become obstacles. This can be especially problematic for migratory species, but can lead to fragmentation of resident populations as well. This study evaluated 40 culverts of 29 sites within a 25-km radius from Toledo city, Paraná State, southern Brazil, with respect to their likel...

  2. Do culverts impact the movements of the endangered white-clawed crayfish?

    Directory of Open Access Journals (Sweden)

    Louca V.

    2014-01-01

    Full Text Available Culverts can impact the migration and dispersal of aquatic animals and result in population fragmentation, increasing the risk of local extinction for endangered species such as the white-clawed crayfish Austropotamobius pallipes. This study used radio telemetry and passive integrated transponder (PIT telemetry to determine whether existing and experimental covered culverts affect the upstream and downstream movements of adult white-clawed crayfish. Daily crayfish movement rates did not differ significantly between an unlit 363-m long culvert and open stream channel sections. Crayfish moved into dark, covered sections volitionally. However, limited upstream movement occurred at sudden transitions of bed height or smooth-concrete box culvert sections with fast flow, suggesting partial barrier effects. In the 20-m long experimental in-stream culvert, also dark, but with natural stream bed, 70% of radio-tagged crayfish released downstream entered the culvert, as did 60% of those released upstream. Overall 35% passed through, with similar numbers in each direction. We conclude that dark culverts up to several hundred metres do not inhibit dispersal of white-clawed crayfish, provided stream slope, bed type and water velocity are amenable for movement and refuge. Care is required to ensure that culverts are bioengineered to ensure that average water velocity is sufficiently low and local hydraulic variation high, the bed and/or sidewalls contain refuge structures, and there are no cross-channel steps in bed level. Smooth-bedded box culverts are unlikely to be suitable for white-clawed crayfish.

  3. Substrate roughening improves swimming performance in two small-bodied riverine fishes: implications for culvert remediation and design.

    Science.gov (United States)

    Rodgers, Essie M; Heaslip, Breeana M; Cramp, Rebecca L; Riches, Marcus; Gordos, Matthew A; Franklin, Craig E

    2017-01-01

    Worldwide declines in riverine fish abundance and diversity have been linked to the fragmentation of aquatic habitats through the installation of instream structures (e.g. culverts, dams, weirs and barrages). Restoring riverine connectivity can be achieved by remediating structures impeding fish movements by, for example, replacing smooth substrates of pipe culverts with naturalistic substrates (i.e. river stones; culvert roughening). However, empirical evaluations of the efficacy of such remediation efforts are often lacking despite the high economic cost. We assessed the effectiveness of substrate roughening in improving fish swimming performance and linked this to estimates of upstream passage success. Critical swimming speeds (Ucrit) of two small-bodied fish, purple-spotted gudgeon (Mogurnda adspersa; 7.7-11.6 cm total length, BL) and crimson-spotted rainbowfish (Melanotaenia duboulayi; 4.2-8.7 cm BL) were examined. Swimming trials were conducted in a hydraulic flume fitted with either a smooth acrylic substrate (control) or a rough substrate with fixed river stones. Swimming performance was improved on the rough compared to the smooth substrate, with Mo. adspersa (Ucrit-smooth = 0.28 ± 0.0 m s(-1), 2.89 ± 0.1 BL s(-1), Ucrit-rough = 0.36 ± 0.02 m s(-1), 3.66 ± 0.22 BL s(-1), mean ± s.e) and Me. duboulayi (Ucrit-smooth = 0.46 ± 0.01 m s(-1), 7.79 ± 0.33 BL s(-1); Ucrit-rough = = 0.55 ± 0.03 m s(-1), 9.83 ± 0.67 BL s(-1), mean ± s.e.) both experiencing a 26% increase in relative Ucrit. Traversable water velocity models predicted maximum water speeds allowing successful upstream passage of both species to substantially increase following roughening remediation. Together these findings suggest culvert roughening may be a solution which allows hydraulic efficiency goals to be met, without compromising fish passage.

  4. Flow induced pulsations generated in corrugated tubes

    NARCIS (Netherlands)

    Belfroid, S.P.C.; Swindell, R.; Tummers, R.

    2008-01-01

    Corrugated tubes can produce a tonal noise when used for gas transport, for instance in the case of flexible risers. The whistling sound is generated by shear layer instability due to the boundary layer separation at each corrugation. This whistling is examined by investigating the frequency, amplit

  5. Flow induced pulsations caused by corrugated tubes

    NARCIS (Netherlands)

    Shatto, D.P.; Belfroid, S.P.C.; Peters, M.C.A.M.

    2007-01-01

    Corrugated tubes can produce a tonal noise when used for gas transport, for instance in the case of flexible risers. The whistling sound is generated by shear layer instability due to the boundary layer separation at each corrugation. This whistling is examined by investigating the frequency, amplit

  6. Road Bridges and Culverts, MDTA Culverts, Culverts on John F. Kennedy Highway (I95), Baltimore Harbor Tunnel Throughway, Francis Scott Key Bridge, Bay bridge, Nice Bridge, Published in 2010, 1:1200 (1in=100ft) scale, Maryland Transportation Authority.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2010. It is described...

  7. Road Bridges and Culverts, Highway Culverts, Published in 2006, 1:24000 (1in=2000ft) scale, Lafayette County Land Records.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Field Survey/GPS information as of 2006. It is...

  8. Brownian transport in corrugated channels with inertia

    CERN Document Server

    Ghosh, P K; Marchesoni, F; Nori, F; Schmid, G; 10.1103/PhysRevE.86.021112

    2012-01-01

    The transport of suspended Brownian particles dc-driven along corrugated narrow channels is numerically investigated in the regime of finite damping. We show that inertial corrections cannot be neglected as long as the width of the channel bottlenecks is smaller than an appropriate particle diffusion length, which depends on the the channel corrugation and the drive intensity. Being such a diffusion length inversely proportional to the damping constant, transport through sufficiently narrow obstructions turns out to be always sensitive to the viscosity of the suspension fluid. The inertia corrections to the transport quantifiers, mobility and diffusivity, markedly differ for smoothly and sharply corrugated channels.

  9. Movement and survival of an amphibian in relation to sediment and culvert design

    Science.gov (United States)

    Honeycutt, R.K; Lowe, W.H.; Hossack, Blake R.

    2016-01-01

    Habitat disturbance from stream culverts can affect aquatic organisms by increasing sedimentation or forming barriers to movement. Land managers are replacing many culverts to reduce these negative effects, primarily for stream fishes. However, these management actions are likely to have broad implications for many organisms, including amphibians in small streams. To assess the effects of culverts on movement and survival of the Idaho giant salamander (Dicamptodon aterrimus), we used capture-mark-recapture surveys and measured sediment in streams with 2 culvert types (i.e., unimproved culverts, improved culverts) and in streams without culverts (i.e., reference streams). We predicted culverts would increase stream sediment levels, limit movement, and reduce survival of Idaho giant salamanders. We also determined the effect of sediment levels on survival of salamanders because although sediment is often associated with distribution and abundance of stream amphibians, links with vital rates remain unclear. To estimate survival, we used a spatial Cormack–Jolly–Seber (CJS) model that explicitly incorporated information on movement, eliminating bias in apparent survival estimated from traditional (i.e., non-spatial) CJS models caused by permanent emigration beyond the study area. To demonstrate the importance of using spatial data in studies of wildlife populations, we compared estimates from the spatial CJS to estimates of apparent survival from a traditional CJS model. Although high levels of sediment reduced survival of salamanders, culvert type was unrelated to sediment levels or true survival of salamanders. Across all streams, we documented only 15 movement events between study reaches. All movement events were downstream, and they occurred disproportionately in 1 stream, which precluded measuring the effect of culvert design on movement. Although movement was low overall, the variance among streams was high enough to bias estimates of apparent survival

  10. MONITORING CULVERT PASSAGE OF JUVENILE SALMONIDS WITH PIT TAGS AND STATIONARY AND PORTABLE PIT-TAG READERS

    Science.gov (United States)

    Federal land management agencies in the PNW face increasing pressure to replace culverts that do not pass all life history stages of anadromous salmon and trout. Prioritization of culverts for replacement is often based on the physical parameters of culverts, and not on how fish...

  11. Aerodynamic sound of flow in corrugated tubes

    OpenAIRE

    2009-01-01

    Aerodynamic sound emitted by flow through a finite length duct with corrugated inner surface is experimentally investigated. As the mechanism of sound generating oscillation, so far popular 'cavity-tone' mechanism was definitely denied. The principal reason is: With corrugation of helical geometry, no characteristic sound came on, while a pair of a nozzle edge and a leading edge both of which are helical, with constant distance, made essentially as loud sound as a pair of normal edges. Other ...

  12. Hybrid modes in a square corrugated waveguide

    Energy Technology Data Exchange (ETDEWEB)

    Ohkubo, K.

    2001-06-01

    By using two scalar eigenfunctions, electric and magnetic fields in the rectangular (or square) corrugated waveguide are analyzed. In a rectangular corrugated waveguide, the boundary conditions on two corrugated and two smooth walls can be satisfied to excite the hybrid mode. In a highly oversized waveguide where the wavelength of dominant mode is close to that in vacuum, two smooth walls can be exchanged with the corrugated walls because the boundary condition at this walls is satisfied approximately. The replacement is possible due to almost no penetration of the electromagnetic fields into the gap of the replaced walls when the direction of main electric field is parallel to the gap of replaced walls. This characteristic enables us to rotate the polarization of the hybrid mode in the oversized square waveguide with all four corrugated walls and is applicable to the remote steering antenna for electron cyclotron heating in the ITER. For a beam injection larger than the critical angle in this antenna, excited higher modes are at a considerably different wavelength from that in vacuum and result in the dissatisfaction of boundary conditions due to millimeter-wave penetration into corrugation gaps in replaced walls. (author)

  13. Assessing Juvenile Salmonid Passage Through Culverts: Field Research in Support of Protocol Development

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Greg D.; Evans, Nathan R.; Pearson, Walter H.; Southard, John A.

    2001-10-30

    The primary goal of our research this spring/ summer was to refine techniques and examine scenarios under which a standardized protocol could be applied to assess juvenile coho salmon (O. kisutch) passage through road culverts. Field evaluations focused on capture-mark- recapture methods that allowed analysis of fish movement patterns, estimates of culvert passability, and potential identification of cues inducing these movements. At this stage, 0+ age coho salmon fry 30 mm to 65 mm long (fork length) were the species and age class of interest. Ultimately, the protocol will provide rapid, statistically rigorous methods for trained personnel to perform standardized biological assessments of culvert passability to a number of juvenile salmon species. Questions to be addressed by the research include the following: ? Do hydraulic structures such as culverts restrict habitat for juvenile salmonids? ? How do existing culverts and retrofits perform relative to juvenile salmonid passage? ? Do some culvert characteristics and hydraulic conditions provide better passage than others? ? Does the culvert represent a barrier to certain size classes of fish? Recommendations addressed issues of study site selection, initial capture, marking, recapture/observations, and estimating movement.

  14. STUDY OF CARRYING CAPACITY OF A CORRUGATED METAL CONSTRUCTION BY CRITERION OF YIELD HINGE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Y. Y. Luchko

    2015-10-01

    Full Text Available Purpose. This research is aimed to: 1 calculation of equivalent forces caused by rolling stock in winter and summer seasons at different parameters of the irregularities of railway track; 2 research of bearing capacity of corrugated metal constructions (CMC in terms of development of plastic hinge in the top of the metal pipe due to irreversible residual deformation of the vertical and horizontal diameters of the pipe. Methodology. The calculation of equivalent forces is carried out according to the method of calculating the railway track on strength and stability. Further a mathematical algorithm was developed in the software environment of Mathcad 14, with which the calculations were made about the formation of a plastic hinge at the top of the pipe for different values of the irregularities of the railway track and the degree of compaction of soil backfill. In these studies, the calculations were carried out at the design value of the compaction degree of soil backfill and magnitude of dynamic loading on railway rolling stock. Findings. Analysis of multivariate calculations of testing the condition of occurrence of plastic hinge at the top of the pipe arch has revealed that the first plastic hinge, which occurs in the set of CMC is revealed only when there is a simultaneous unfavorable influence of two factors (causes. These are the factors: the assumption of the development of the track irregularities out of the allowable values without the implementation of measures to eliminate or limit the speed of trains (the first cause; reduction of compaction of soil backfill below the 90 % (the second cause. In case of absence of one of the causes the origin of the plastic hinge will not happen. Originality. It was the first time, when the bearing capacity of corrugated metal construction with large diameter (more than 6 m with account of factors complex: the degree of compaction of soil backfill, the magnitude of the dynamic loads from rolling stock

  15. Road Bridges and Culverts, 2006 2' contours; autocad dwg, Published in unknown, Washoe County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset as of unknown. It is described as '2006 2' contours; autocad dwg'. Data by this publisher are often provided in State Plane...

  16. Chaotic Motion of Corrugated Circular Plates

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Large deflection theory of thin anisotropic circular plates was used to analyze the bifurcation behavior and chaotic phenomena of a corrugated thin circular plate with combined transverse periodic excitation and an in-plane static boundary load. The nonlinear dynamic equation for the corrugated plate was derived by employing Galerkin's technique. The critical conditions for occurrence of the homoclinic and subharmonic bifurcations as well as chaos were studied theoretically using the Melnikov function method. The chaotic motion was also simulated numerically using Maple, with the Poincaré map and phase curve used to evaluate when chaotic motion appears. The results indicate some chaotic motion in the corrugated plate. The method is directly applicable to chaotic analysis of an isotropic circular plate.

  17. Designing and constructing corrugated glass facades

    Directory of Open Access Journals (Sweden)

    Rob Nijsse

    2015-05-01

    Full Text Available Flat glass panels are in use since the time of the Roman Empire. In the ruins of the city of Pompeii, destroyed by the Vulcan Vesuvius in 79 DC, a glass panel in a bronze frame of 300 × 600 mm was found. In this article we describe a mayor improvement in the structural behaviour of glass panels by making the glass curved, or more accurately, corrugated. Both the in- and out-plane loading meet far more resistance against deformation, and the corrugated glass panels have a largely increased bearing capacity with the same thickness of glass the flat panel has. Also architecturally the appearance of a corrugated glass panel in facades is far more appealing.

  18. Experimental investigation on discharge coefficient for a combined broad crested weir-box culvert structure

    Science.gov (United States)

    Guven, A.; Hassan, M.; Sabir, Shahin

    2013-09-01

    This study investigates the hydraulic characteristics of simultaneous flow over broad crested weir and through box (square) culverts experimentally. The variation of discharge coefficient (Cd) of the combined structure with various affective parameters such as upstream head, length of culvert, culvert inlet shape, culvert internal dimension, weir crest height, weir side slope angle, and weir width was analyzed. For this purpose 12 glass models of combined broad crested weirs and box culverts were manufactured and tested in a laboratory flume of 12 m. Discharge coefficient predicting equations were developed as a function of the dimensionless terms. The overall results showed that Cd increases as the ratio of the total head of water above the weir crest to the height of the weir crest H/P increases for all the models and for each flow state (weir and combined). Cd values increased as the head increased for all the models tested as culvert flow only, and also with decreasing of the angle between crest of the weir with the sides.

  19. Design of Corrugated Plates for Optimal Fundamental Frequency

    Directory of Open Access Journals (Sweden)

    Nabeel Alshabatat

    2016-01-01

    Full Text Available This paper investigates shifting the fundamental frequency of plate structures by corrugation. Creating corrugations significantly improves the flexural rigidities of plate and hence increases its natural frequencies. Two types of corrugations are investigated: sinusoidal and trapezoidal corrugations. The finite element method (FEM is used to model the corrugated plates and extract the natural frequencies and mode shapes. The effects of corrugation geometrical parameters on simply supported plate fundamental frequency are studied. To reduce the computation time, the corrugated plates are modeled as orthotropic flat plates with equivalent rigidities. To demonstrate the validity of modeling the corrugated plates as orthotropic flat plates in studying the free vibration characteristics, a comparison between the results of finite element model and equivalent orthotropic models is made. A correspondence between the results of orthotropic models and the FE models is observed. The optimal designs of sinusoidal and trapezoidal corrugated plates are obtained based on a genetic algorithm. The optimization results show that plate corrugations can efficiently maximize plate fundamental frequency. It is found that the trapezoidal corrugation can more efficiently enhance the fundamental frequency of simply supported plate than the sinusoidal corrugation.

  20. Effect of Corrugation Angle on Heat Transfer Studies of Viscous Fluids in Corrugated Plate Heat Exchangers

    Directory of Open Access Journals (Sweden)

    B Sreedhara Rao

    2015-04-01

    Full Text Available In the present investigation heat transfer studies are conducted in corrugated plate heat exchangers (PHEs having three different corrugation angles of 300, 400 and 500. The plate heat exchangers have a length of 30 cm and a width of 10 cm with a spacing of 5 mm. Water and 20% glycerol solution are taken as test fluids and hot fluid is considered as heating medium. The wall temperatures are measured along the length of exchanger at seven different locations by means of thermocouples. The inlet and outlet temperatures of test fluid and hot fluid are measured by means of four more thermocouples. The experiments are conducted at a flowrate ranging from 0.5 lpm to 6 lpm with the test fluid. Film heat transfer coefficient and Nusselt number are determined from the experimental data. These values are compared with different corrugation angles. The effects of corrugation angles on heat transfer rates are discussed.

  1. Flood magnitude and frequency of Little Mantual Creek at the culvert at milepost 7.8 on New Jersey Route 44, and at the Conrail culvert 0.20 miles downstream, West Deptford Township, Gloucester County, New Jersey

    Science.gov (United States)

    Barringer, Thomas

    1996-01-01

    The magnitude and frequency of floods at Little Mantua Creek at the culvert on New Jersey Route 44 at milepost 7.8 and at the Conrail culvert 0.20 miles downstream, in West Deptford Township, New Jersey, were determined by using the New Jersey Department of Environmental Protection Special Report 38 method. Flood-magnitude and -frequency estimates, as well as drainage-basin characteristics, are included in this report. The 100-year-flood estimates are 249 cubic feet per second at the culvert on New Jersey Route 44, and 243 cubic feet per second at the Conrail culvert.

  2. Optimizing Casimir torque between corrugated metallic plates

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Robson B. [Universidade Federal Fluminense, Niteroi, RJ (Brazil); Maia Neto, Paulo A. [Instituto de Fisica, Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Full text: The Casimir effect plays a major role in micro- and nano-electromechanical systems (MEMS and NEMS). Besides the normal Casimir force between metallic or dielectric plates, the observation of the lateral Casimir force between corrugated plates opens novel possibilities of micro-mechanical control. The lateral force results from breaking the translational symmetry along directions parallel to the plates by imprinting periodic corrugations on both metallic plates. As the rotational symmetry is broken by this geometry, a Casimir torque arises when the corrugations are not aligned. We calculate the Casimir torque between two parallel metallic plates with surface profiles in the form of 'fans' with arbitrary relative spatial orientation. As compared to the case of anisotropic dielectric plates, the torque per unit area is increased by up to three orders of magnitude for a given separation distance. The experiment proposed here can be performed with torsion pendulum techniques for separation distances as large as 1 μm. From the point of view of fundamental physics, this torque makes possible a precise experimental investigation of the non-trivial geometry dependence of the Casimir effect. We follow the scattering approach and calculate the Casimir energy up to second order in the corrugation amplitudes, taking into account nonspecular reflections, polarization mixing and the finite conductivity of the metals. We investigate the experimental conditions that optimize the effect. (author)

  3. Coupled Transport Phenomena in Corrugated Photocatalytic Reactors

    Institute of Scientific and Technical Information of China (English)

    Adam A. Donaldson; ZHANG Zisheng

    2011-01-01

    Corrugated reactors are known for their use in applications requiring UV-exposure, whereby media flowing within the corrugated channel react with a photo-active catalyst impregnated on the surface (i.e. TiO2). The performance in these systems is dependent on catalyst properties and reactivity for a given light source, in conjunc-tion with the coupled transport of reactants within the media and photons falling incident to the catalyst surface. Experimental and computational analyses of local mass transfer and radiation pattems for a broad range of corrugation angles, depths, and non-idealities introduced during manufacture (i.e. fold curvature) are thus integrated to the design and optimization of these systems. This work explores techniques for determining incident energy distribu-tions on the surface of corrugated reactor geometries with non-ideal cross-sectional profiles, and the local and overall mass transfer rates obtained using computational fluid dynamics and experimental analysis. By examining the reaction kinetics for the photo-degradation of 4-chlorophenol over a TiO2 catalyst, the effects of surface area, energy incidence with photon recapture, and local mass transfer on overall reactor performance are presented to highlight ootimization concerns for these tvoes of reactors.

  4. ESTABILIDADE DE CANAIS FLUVIAIS EM TORNO DE PONTES E BUEIROS NA BACIA HIDROGRÁFICA DO PARANÁ III, OESTE DO PARANÁ - EVALUATION OF THE CHANNEL STABILITY IN BRIDGES AND CULVERTS IN PARANÁ III WATERSHED, WESTERN PARANÁ STATE, BRAZIL

    Directory of Open Access Journals (Sweden)

    Leandro Neri Bortoluzzi

    2017-04-01

    The bridges and culverts alter the natural conditions of rivers, causing changes in fluvial processes. The level of stability of river banks and beds around crossing structures was evaluated in the Paraná III watershed, Western region of Paraná State (Brazil, adopting the methodology of FHWA (2006. A watershed has an area of 7,979.4 Km2 and it predominantly basaltic rocks of the Serra Geral Formation (Cretaceous that make up the basalt plateau with altitudes ranging between 220 and 725 m. The degree of channel stability was analyzed at 46 structures (18 bridges, 15 culverts box, 7 culverts pipe and 6 small bridges. We selected all crossings structures located in the Paraná III watershed along paved roads, positioned outside the urban area. Among the crossings structure, 13 were classified as excellent level of stability and 33 as good level. It was not registered any points with regular or poor stability. The prevalence of high levels of stability is credited to the outcrop of basalt substrate in bed and the low erodibility of the banks soils (Oxisols and Ultisols providing greater stability to the channel in the vicinity of the structures.

  5. Guided wave technique for non-destructive testing of StifPipe

    Science.gov (United States)

    Amjad, Umar; Yadav, Susheel K.; Nguyen, Chi H.; Ehsani, Mohammad; Kundu, Tribikram

    2015-03-01

    The newly-developed StifPipe® is an effective technology for repair and strengthening of existing pipes and culverts. The wall of this pipe consists of a lightweight honeycomb core with carbon or glass fiber reinforced polymer (FRP) applied to the skin. The presence of the hollow honeycomb introduces challenges in the nondestructive testing (NDT) of this pipe. In this study, it is investigated if guided waves, excited by PZT (Lead ZirconateTitanate) transducer can detect damages in the honeycomb layer of the StifPipe®. Multiple signal processing techniques are used for in-depth study and understanding of the recorded signals. The experimental technique for damage detection in StifPipe® material is described and the obtained results are presented in this paper.

  6. Use of pilot-controlled horizontal drilling for a culvert under the Danube near the town of Aschach; Einsatz gesteuerter Horizontalbohrtechnik zur Unterduekerung der Donau bei Aschach

    Energy Technology Data Exchange (ETDEWEB)

    Marek, H. [Ferngas AG, Linz (Austria)

    1998-10-01

    The challenge involved in the `Donaudueker Aschach` (Aschach sub-Danube Culvert) project was that of drilling through the river bed in an exceptionally difficult geological structure. Tunnelling started in Aschach, and the drill emerged from the soil precisely on target after 470 m at the connecting point close to Feldkirchen. A 200 mm diameter steel pipe was installed into this boring without any hindrance to road and river traffic, and construction between Aschach and Feldkirchen was successfully completed. (orig.) [Deutsch] Die Herausforderung beim Bauvorhaben `Donaudueker Aschach` war die Durchbohrung des Flussbettes in einer aeusserst schwierigen geologischen Struktur. In Aschach wurde mit der Tunnelbohrung begonnen und punktgenau tauchte nach 470 m der Bohrkopf an der Anschlussstelle Feldkirchen aus dem Erdreich auf. Ohne Verkehrs- und Schiffahrtsbeeintraechtigung wurde in die Bohrung ein Stahlrohr mit 200 mm Durchmesser eingezogen und der Bau zwischen Aschach und Feldkirchen erfolgreich durchgefuehrt. (orig.)

  7. Estimates for Pu-239 loadings in burial ground culverts based on fast/slow neutron measurements

    Energy Technology Data Exchange (ETDEWEB)

    Winn, W.G.; Hochel, R.C.; Hofstetter, K.J.; Sigg, R.A.

    1989-08-15

    This report provides guideline estimates for Pu-239 mass loadings in selected burial ground culverts. The relatively high recorded Pu-239 contents of these culverts have been appraised as suspect relative to criticality concerns, because they were assayed only with the solid waste monitor (SWM) per gamma-ray counting. After 1985, subsequent waste was also assayed with the neutron coincidence counter (NCC), and a comparison of the assay methods showed that the NCC generally yielded higher assays than the SWM. These higher NCC readings signaled a need to conduct non-destructive/non-intrusive nuclear interrogations of these culverts, and a technical team conducted scoping measurements to illustrate potential assay methods based on neutron and/or gamma counting. A fast/slow neutron method has been developed to estimate the Pu-239 in the culverts. In addition, loading records include the SWM assays of all Pu-239 cuts of some of the culvert drums and these data are useful in estimating the corresponding NCC drum assays from NCC vs SWM data. Together, these methods yield predictions based on direct measurements and statistical inference.

  8. Geometry and intensity based culvert detection in mobile laser scanning point clouds

    Science.gov (United States)

    Lin, Yi; Hyyppa, Juha

    2010-11-01

    Mobile laser scanning (MLS), which recently has been developing so quickly as a promising technology for mapping and remote sensing (RS), offers a good means to measure the fundamental geographic data, e.g. culverts, for urban planning and road engineering. This study as the first try presents a new automatic method to detect culverts in MLS point clouds, in which actually only partial characterization of this category of objects can be presented due to the restricted scanning zenith of MLS. The schematic is based on the raster-form of the data, and the digital terrain models (DTMs) with multi-leveled resolutions are first yielded by local minimum filtering. Then, the common layout of the expanded areas containing culverts is generalized as the theoretical basis, and the schematic components are derived to deploy the concrete judgment. The geometry and intensity information about culverts are both utilized to determine the real locations from coarse- to fine-scales. Numerical analysis based on the real-measured MLS data at the Espoonlahti test site has basically validated the proposed approach. Concretely, the statistical errors of the retrieved lengths and widths of the pedestrian culverts are less than 9% and 16% compared to the real ones individually, notwithstanding the inner heights innately in-accessible.

  9. Corrugation of relativistic magnetized shock waves

    CERN Document Server

    Lemoine, M; Gremillet, L

    2016-01-01

    As a shock front interacts with turbulence, it develops corrugation which induces outgoing wave modes in the downstream plasma. For a fast shock wave, the incoming wave modes can either be fast magnetosonic waves originating from downstream, outrunning the shock, or eigenmodes of the upstream plasma drifting through the shock. Using linear perturbation theory in relativistic MHD, this paper provides a general analysis of the corrugation of relativistic magnetized fast shock waves resulting from their interaction with small amplitude disturbances. Transfer functions characterizing the linear response for each of the outgoing modes are calculated as a function of the magnetization of the upstream medium and as a function of the nature of the incoming wave. Interestingly, if the latter is an eigenmode of the upstream plasma, we find that there exists a resonance at which the (linear) response of the shock becomes large or even diverges. This result may have profound consequences on the phenomenology of astrophys...

  10. Iron Line Variability of Discoseismic Corrugation Modes

    CERN Document Server

    Tsang, David

    2013-01-01

    Using a fast semi-analytic raytracing code, we study the variability of relativistically broadened iron lines due to discoseismic oscillations concentrated in the inner-most regions of accretion discs around black holes. The corrugation mode, or c-mode, is of particular interest as its natural frequency corresponds well to the ~0.1-15Hz range observed for low-frequency quasi-periodic oscillations (LFQPOs) for lower spins. Comparison of the oscillation phase dependent variability and QPO-phase stacked iron line observations will allow such discoseismic models to be confirmed or ruled out as a source of particular LFQPOs. The spectral range and frequency of the variability of the iron line due to corrugation modes can also potentially be used to constrain the black hole spin if observed with sufficient temporal and spectral resolution.

  11. Finite Temperature Casimir Effect for Corrugated Plates

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yan; SHAO Cheng-Gang; LUO Jun

    2006-01-01

    @@ Using the path-integral method, the corrections to the Casimir energy due to the combined effect of surface roughness and the finite temperature are calculated. For the specific case of two sinusoidally corrugated plates,the lateral Casimir force at finite temperature is obtained. The amplitude of the lateral Casimir force has a maximum at an optimal wavelength of λ≈ 2H with the mean plate distance H. This optimal parameter relation is almost independent of temperature.

  12. Surface-Water Exchange through Culverts beneath State Road 9336 within Everglades National Park, 2004-05

    Science.gov (United States)

    Schaffranek, Raymond W.; Stewart, Marc A.; Nowacki, Daniel J.

    2008-01-01

    The U.S. Geological Survey collected hydrologic data between June 2004 and December 2005 to investigate the temporal and spatial nature of flow exchanges through culverts beneath State Road 9336 within Everglades National Park. Continuous data collected during the study measured flow velocity, water level, salinity, conductivity, and water-temperature in or near seven culverts between Pa-hay-okee Overlook access road and Nine Mile Pond. The two culverts east of Pa-hay-okee Overlook access road flowed into Taylor Slough Basin from 87 to 96 percent of the study period, whereas flows through five culverts between Pa-hay-okee Overlook access road and Nine Mile Pond flowed into Shark River Slough Basin from 70 to 99 percent of the study period. Synoptic flow discharges measured at all culverts during three intensive field efforts revealed a net discharge into Taylor Slough Basin from Shark River Slough Basin through culverts between Royal Palm Road and Pa-hay-okee Overlook access road, and into Shark River Slough Basin from Taylor Slough Basin through culverts between Pa-hay-okee Overlook access road and Nine Mile Pond. Data collected during the study and presented in this report provided additional knowledge of the magnitude, direction, and nature of flow exchanges through the road culverts.

  13. 49 CFR 1242.15 - Roadway, tunnels and subways, bridges and culverts, ties, rails, other track material, ballast...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Roadway, tunnels and subways, bridges and culverts, ties, rails, other track material, ballast, track laying and surfacing, and road property damaged... culverts, ties, rails, other track material, ballast, track laying and surfacing, and road property damaged...

  14. Numerical simulation of the formation of short pitch corrugation

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, S. [ABB Research Center, Heidelberg (Germany); Knothe, K. [Technical Univ. Berlin (Germany)

    2000-07-01

    The formation of periodic wear patterns on the running surface of the rail has been observed for more than a hundred years. These wear patterns are the reason for unwelcome effects like noise and damage to the track. A high number of publications was concerned with the problem and most rail corrugation types can be explained to date. Only the mechanism which leads to so called short pitch corrugation is not understood yet. Therefore, based on previous work a linear wheel-track model has been developed to understand the formation of short pitch corrugation on tangent track. Numerical simulations have been undertaken with this model to analyse the corrugation process. Based on numerical results it is tried to explain why the corrugation pitch observed in practice vary little with train speed and it is shown how wheel-rail parameters influence the proneness to corrugation. (orig.)

  15. Hydraulic Evaluation of Culvert Valves at Eisenhower and Snell Locks, St. Lawrence Seaway

    Science.gov (United States)

    2015-06-01

    ER D C/ CH L TR -1 5- 7 Hydraulic Evaluation of Culvert Valves at Eisenhower and Snell Locks, St. Lawrence Seaway Co as ta l a nd H...client/default. ERDC/CHL TR-15-7 June 2015 Hydraulic Evaluation of Culvert Valves at Eisenhower and Snell Locks, St. Lawrence Seaway...ERDC/CHL TR-15-7 ii Abstract The aged, double-skin-plate valves of the Eisenhower and Snell Locks on the St. Lawrence Seaway are being replaced

  16. Silicon Carbide Corrugated Mirrors for Space Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Trex Enterprises Corporation (Trex) proposes technology development to manufacture monolithic, lightweight silicon carbide corrugated mirrors (SCCM) suitable for...

  17. Turbidity changes during culvert to bridge upgrades at Carmen Creek, Idaho

    Science.gov (United States)

    Randy B. Foltz; Breann Westfall; Ben Kopyscianski

    2013-01-01

    Forest Service, BLM, and state forest roads provide access for timber harvest and recreational use. Culverts used on these roads were historically designed to convey water under the road with little attention given to passage of aquatic organisms. In the past decade or so, driven largely by the Endangered Species Act listing of various salmonids in the Pacific...

  18. Quantifying fish habitat associated with stream simulation design culverts in northern Wisconsin

    Science.gov (United States)

    A. Timm; D. Higgins; J. Stanovick; R. Kolka; S. Eggert

    2017-01-01

    This study investigated the effects of culvert replacement design on fish habitat and fish weight by comparing substrate diversity and weight at three stream simulation (SS)-design and three bankfull and backwater (BB)-design sites on the Chequamegon-Nicolet National Forest, Wisconsin. Stream channel cross-sections, Wolman substrate particle counts, and single-pass...

  19. Imaging Buried Culverts Using Ground Penetrating Radar: Comparing 100 MHZ Through 1 GHZ Antennae

    Science.gov (United States)

    Abdul Aziz, A.; Stewart, R. R.; Green, S. L.

    2013-12-01

    *Aziz, A A aabdulaziz@uh.edu Allied Geophysical Lab, Department of Earth and Atmospheric Sciences, University of Houston, TX, USA Stewart, R R rrstewart@uh.edu Allied Geophysical Lab, Department of Earth and Atmospheric Sciences, University of Houston, TX, USA *Green, S L slgreen@yahoo.com Allied Geophysical Lab, Department of Earth and Atmospheric Sciences, University of Houston, TX, USA A 3D ground penetrating radar (GPR) survey, using three different frequency antennae, was undertaken to image buried steel culverts at the University of Houston's La Marque Geophysical Observatory 30 miles south of Houston, Texas. The four culverts, under study, support a road crossing one of the area's bayous. A 32 m by 4.5 m survey grid was designed on the road above the culverts and data were collected with 100 MHz, 250 MHz, and 1 GHz antennae. We used an orthogonal acquisition geometry for the three surveys. Inline sampling was from 1.0 cm to 10 cm (from 1 GHz to 100 MHz antenna) with inline and crossline spacings ranging from 0.2 m to 0.5 m. We used an initial velocity of 0.1 m/ns (from previous CMP work at the site) for the display purposes. The main objective of the study was to analyze the effect of different frequency antennae on the resultant GPR images. We are also interested in the accuracy and resolution of the various images, in addition to developing an optimal processing flow.The data were initially processed with standard steps that included gain enhancement, dewow and temporal-filtering, background suppression, and 2D migration. Various radar velocities were used in the 2D migration and ultimately 0.12 m/ns was used. The data are complicated by multipathing from the surface and between culverts (from modeling). Some of this is ameliorated via deconvolution. The top of each of the four culverts was evident in the GPR images acquired with the 250 MHz and 100 MHz antennas. For 1 GHz, the top of the culvert was not clear due to the signal's attenuation. The 250 MHz

  20. An Analysis of Stream Culvert Fish Passage on the Navy Railroad Line between Bremerton and Shelton, Washington

    Energy Technology Data Exchange (ETDEWEB)

    May, Christopher W.; Miller, Martin C.; Southard, John A.

    2004-10-25

    The Navy railroad service line runs between Shelton, Bremerton, and Silverdale, and is used by the Navy to transfer freight to its facilities. It is also used by commercial clients to ship service items and bulk cargo for municipalities along portions of the route. Culverts of various size and construction convey streams and stormwater runoff under the railroad line. These allow transfer of water and, in some cases allow for passage of juvenile and adult salmon into waters upstream of the culverts. As part of this project, 21 culverts along a 34-mile reach (Shelton to Bremerton) of this railroad were surveyed to evaluate their function and ability to allow salmon to utilize the streams. The culverts and attached watersheds were evaluated using criteria developed by the Washington Department of Fish and Wildlife to assign a Priority Index (PI) to barriers present on each fish-bearing stream. The PI is a relative numeric rating indicator, assigned using consistent criteria related to the degree of potential habitat gained by removing barriers and improving the function of the watershed. Of the 21 culverts evaluated, five were found to be complete fish-passage barriers and six were found to be partial barriers, primarily to juvenile salmon. Three of these culverts had PI ratings above 10 and five others had ratings between 7 and 10. Corrective action can be taken based on any PI rating, but the WDFW normally assigns lower priority to projects with PI scores lower than 15. Several of the stream and culverts had previously been evaluated for structural integrity and function and have been scheduled for repair. A narrative indicating the condition of the culvert has been prepared as well as a table indicating the PI scores and a summary of recommendations for action for each culvert.

  1. 山地城市高落差"嵌岩式跌水箱涵"排水系统设计%Design of Drainage System of Rock-socketed Water Drop Box Culverts with High Fall in Mountainous City

    Institute of Scientific and Technical Information of China (English)

    张智; 余薇薇; 毕生兰; 张勤; 胡建; 陈杰云

    2011-01-01

    山地城市地形坡度较大、地面情况较复杂,排水管道系统上、下端落差大.在设计某排水管道系统时,综合考虑了当地地势、地质条件以及周边环境,在落差为43 m的"雨、污水瀑布"处采用钢筋混凝土嵌岩式跌水箱涵的方式将该处污水截流,末端连接架空球墨铸铁管将污水排至主干管.雨季部分雨水进入箱涵及管道,大部分雨水通过溢流堰溢出.设计充分利用了"雨、污水瀑布"冲刷形成的梯级岩石,采用"嵌岩式跌水箱涵"收集污水,从根本上改善了周边环境,为相关工程提供了设计参考.%In the mountainous cities, the terrain slope is steep, the ground is relatively complex,and the drainage pipe system has big ups and downs.After the comprehensive consideration of local topography, geology conditions and the surrounding environment, the design of a drainage pipe system adopts the reinforced concrete rock-socketed drop water box culverts at the rainwater and sewage waterfall with a drop of 43 m to intercept the sewage and drain it to the trunk pipe through overhead ductile iron pipes.In the rainy season, a part of rainwater enters the box culverts and the pipeline, and most rainwater overflows through the overflow weir.The design makes full use of stair-shaped rock formed by the rainwater and sewage waterfall, and the rock-socketed drop water box culverts is used to collect sewage, which can radically improve the surrounding environment and provides a reference to the relevant projects.

  2. Piping Flexibility

    Science.gov (United States)

    1978-01-01

    A NASA computer program aids Hudson Engineering Corporation, Houston, Texas, in the design and construction of huge petrochemical processing plants like the one shown, which is located at Ju'aymah, Saudi Arabia. The pipes handling the flow of chemicals are subject to a variety of stresses, such as weight and variations in pressure and temperature. Hudson Engineering uses a COSMIC piping flexibility analysis computer program to analyze stresses and unsure the necessary strength and flexibility of the pipes. This program helps the company realize substantial savings in reduced engineering time.

  3. Piping Analysis

    Science.gov (United States)

    1980-01-01

    Burns & McDonnell provide architectural and engineering services in planning, design and construction of a wide range of projects all over the world. In design analysis, company regularly uses COSMIC computer programs. In computer testing piping design of a power plant, company uses Pipe Flexibility Analysis Program (MEL-21) to analyze stresses due to weight, temperature, and pressure found in proposed piping systems. Individual flow rates are put into the computer, then computer calculates the pressure drop existing across each component; if needed, design corrections or adjustments can be made and rechecked.

  4. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1994-01-01

    It is approximately 10 years since the Third Edition of Heat Pipes was published and the text is now established as the standard work on the subject. This new edition has been extensively updated, with revisions to most chapters. The introduction of new working fluids and extended life test data have been taken into account in chapter 3. A number of new types of heat pipes have become popular, and others have proved less effective. This is reflected in the contents of chapter 5. Heat pipes are employed in a wide range of applications, including electronics cooling, diecasting and injection mo

  5. Water electrolyte transport through corrugated carbon nanopores.

    Science.gov (United States)

    Moghimi Kheirabadi, A; Moosavi, A

    2014-07-01

    We investigate the effect of wall roughness on water electrolyte transport characteristics at different temperatures through carbon nanotubes by using nonequilibrium molecular dynamics simulations. Our results reveal that shearing stress and the nominal viscosity increase with ion concentration in corrugated carbon nanotubes (CNTs), in contrast to cases in smooth CNTs. Also, the temperature increase leads to the reduction of shearing stress and the nominal viscosity at moderate degrees of wall roughness. At high degrees of wall roughness, the temperature increase will enhance radial movements and increases resistance against fluid motion. As the fluid velocity increases, the particles do not have enough time to fully adjust their positions to minimize system energy, which causes shearing stress and the nominal viscosity to increase. By increasing roughness amplitude or decreasing roughness wavelength, the shearing stress will increase. Synergistic effects of such parameters (wall roughness, velocity, ion concentration, and temperature) inside corrugated CNTs are studied and compared with each other. The molecular mechanisms are considered by investigating the radial density profile and the radial velocity profile of confined water inside modified CNT.

  6. Road Bridges and Culverts, Culverts - cross drains were collected via GPS for drainage project, Published in 2005, 1:2400 (1in=200ft) scale, Effingham County Board Of Commissioners.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Hardcopy Maps information as of 2005. It is described...

  7. Road Bridges and Culverts, Bridges, Published in 2006, 1:24000 (1in=2000ft) scale, Lafayette County Land Records.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Field Survey/GPS information as of 2006. It is...

  8. Road Bridges and Culverts, Published in 2006, 1:1200 (1in=100ft) scale, North Georgia Regional Development Center.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Field Survey/GPS information as of 2006. Data by this...

  9. Road Bridges and Culverts, Bridges layers located in GIS and Transportation database., Published in unknown, City of Roswell, GA.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset as of unknown. It is described as 'Bridges layers located in GIS and Transportation database.'. Data by this publisher are...

  10. Road Bridges and Culverts, Published in 2005, 1:1200 (1in=100ft) scale, Brown County, WI.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2005. Data by this...

  11. Mathematical Model for Thin-walled Corrugated Tube under Axial Compression

    Directory of Open Access Journals (Sweden)

    Eyvazian Arameh

    2016-01-01

    Full Text Available In this research, theoretical investigation of corrugated aluminum tubes is performed to predicting the energy absorption characteristics. Aim to deform plastic tubes in predetermined intervals, corrugations are introduced on its surface. Theoretical relations are presented for predicting the energy absorption and mean crushing load of corrugated tubes. Other than that, corrugation helps to control the failure mode.

  12. Effective Thermal Conductivity of Corrugated Insulating Materials

    Science.gov (United States)

    Yamada, Etsuro; Kato, Masayasu; Tomikawa, Takayuki; Takahashi, Kaneko

    The effective thermal conductivity of corrugated insulating materials which are made by polypropylene or polycarbonate have been measured by employing steady state comparison method for several specimen having various thickness and specific weight. The thermal conductivity of them evaluated are also by using the thermal resistance models, and are compared with above measured values and raw materials' conductivity. The main results obtained in this paper are as follows: (1) In regard to the specimen in this paper, the effective thermal conductivity increases with increasing temperature, but the increasing rate of them is small. (2) There are considerable differences between the measured values and the predicted ones that are estimated by using the thermal resistance model in which heat flow by conduction only. This differences increase with increasing specimens' thickness. This difference become extinct by considering the coexistence heat flow of conduction and radiation in the air phase of specimen. (3) The thermal resistance of specimen increases linearly with increasing specimens' thickness.

  13. Corrugation Stuffed Shield for Spacecraft and Its Performance

    Institute of Scientific and Technical Information of China (English)

    LIU You-ying; WANG Hai-fu

    2006-01-01

    A corrugation stuffed shield system protecting spacecrafts against meteoroid and orbital debris (M/OD) is presented. The semi-empirical ballistic limit equations (BLEs)defining the protection capability of the shield system are given, an d the shielding performance is also discussed. The corrugation stuffed shield (CSS) is more effective than stuffed Whipple shield for M/OD protection,and its shielding performance will be improved significantly as increasing the impact angle. Orbital debris up to 1cm in diameter can be shielded effectively as increasing the impact angle to 25° at the corrugated angle of 30°. The results are significant to spacecraft design.

  14. CONTRIBUTIONS ON THE DESIGN OF UNCONVENTIONAL CORRUGATED BOARD STRUCTURES

    Directory of Open Access Journals (Sweden)

    NEIDONI Nadina

    2015-06-01

    Full Text Available The paper depicts a few contributions on the design of several unconventional corrugated board structures. In general, cardboard and corrugated cardboard is strongly linked to packaging. However, limiting these materials to their primary use does nothing else but to restrict the possibilities of using them in other interesting areas. Consequently, new structures built from cardboard have been imagined and in the paper there are presented a few unconventional uses of the corrugated fiberboard, namely as furniture elements, along with the technology used in the design and the manufacturing process.

  15. Open top culverts as an alternative drainage system to minimize ecological effects in earth roads.

    Science.gov (United States)

    García, Jose L.; Elorrieta, Jose; Robredo, Jose C.; García, Ricardo; García, Fernando; Gimenez, Martin C.

    2013-04-01

    During the last fifteen years a research team from School of Forestry at the Technical University of Madrid (Spain) has developed several competitive research projects regarding forest roads and open top culverts. A first approach was established with a prototype of 7 meters length in a hydraulic channel at the laboratory determining main parameters of different open top culverts in relation to different sizes of gravels and the self washing properties relationship with different slopes up to 8 %. The curves obtained may help to properly install these drainage systems avoiding maintenance costs. In addition more targeted pilot studies were developed in different forest earth roads in center and north Spain. The construction of the stations under study was financed by the U.P.M and the R&D National Plan. The main outcomes relates the low variation of humidity in a 20 m. wide range at both sides of the open top culverts and several considerations relating the angle of installation, the spacing of such drainage systems and the benefits against rilling along the roads. Also the erosion produced downhill was established and some construction methods to avoid adverse ecological effects. The diffusion of results includes congresses and a small booklet with a great acceptance in forestry services. Also a patent (ES 2 262 437) of an advanced model has been registered.

  16. On the Culvert Transformation Method of Risk-elimination and Strengthening in Small (2) Type Reservoir%小2型水库除险加固中的涵管改造方法

    Institute of Scientific and Technical Information of China (English)

    周云雄

    2015-01-01

    There are safety concerns such as aging, leaking in culvert pipe used in small (2) the type reservoirs that were built around 1950 after running decade. In order to protect and utilize the existing water resources, this paper discussed culvert transformation method of risk-elimination and strengthening in small (2) type reservoir through the project example, thus more economic effectively eliminated hidden danger, made the water conveyance system efficient and stable, achieved the result of increase income and reduce expenditure, and fully ensured the drinking water and irrigation water demand.%在1950年左右建设的小(2)型水库,经过几十年运行,大部分水库的涵管存在老化、漏水等安全隐患,为保护和利用现有水资源,通过工程实例,探讨小(2)型水库除险加固时涵管的改造方法,从而更经济有效地排除隐患,使输水系统高效稳定,达到开源节流的效果,充分保证饮水和灌溉用水需求。

  17. Piping Connector

    Science.gov (United States)

    1994-01-01

    In Stennis Space Center's Component Test Facility, piping lines carry rocket propellants and high pressure cryogenic fuels. When the lines are chilled to a pretest temperature of 400 degrees below zero, ordinary piping connectors can leak. Under contract to Stennis, Reflange, Inc. developed the T-Con connector, which included a secondary seal that tolerates severe temperature change. Because of the limited need for the large and expensive T-Con product, Reflange also developed the less costly E-Con, a smaller more compact design with the same technical advantages as the T-Con.

  18. Prediction of sound reflection by corrugated porous surfaces.

    Science.gov (United States)

    Allard, J-F; Dazel, O; Gautier, G; Groby, J-P; Lauriks, W

    2011-04-01

    The coupled mode (CM) and finite-element methods (FEMs) are developed and used to predict the acoustic reflection coefficient of a semi-infinite porous medium with closely spaced two-dimensional (2D) periodical corrugations. These methods are also applied to predict the reflection coefficient of a periodic array of porous corrugations installed on an acoustically rigid surface. It is shown that the predictions by the both methods agree closely. The reflection coefficient and Brewster angle of total refraction for the corrugated semi-infinite medium predicted with these methods are compared against that predicted by the Biot/Tolstoy/Howe/Twersky and extended Twersky models. A similar analysis is carried out for porous corrugations set on a rigid backing. The behavior of the reflection coefficient and the pole in the expression for the reflection coefficient located close to grazing incidence is studied.

  19. A comparative study of corrugated horn design by evolutionary techniques

    Science.gov (United States)

    Hoorfar, A.

    2003-01-01

    Here an evolutionary programming algorithm is used to optimize the pattern of a corrugated circular horn subject to various constraints on return loss, antenna beamwidth, pattern circularity, and low cross polarization.

  20. Stylus type MEMS texture sensor covered with corrugated diaphragm

    Science.gov (United States)

    Tsukamoto, Takashiro; Asao, Hideaki; Tanaka, Shuji

    2017-09-01

    In this paper, a stylus type MEMS texture sensor covered with a corrugated palylene diaphragm, which prevent debris from jamming into the sensor without significant degradation of sensitivity and bandwidth, was reported. A new fabrication process using a lost-foil method to make the corrugated diaphragm on a 3-axis piezoresistive force sensor at wafer level has been developed. The texture sensor could detect the surface microstructure as small as about 10 \

  1. Fiber Bragg Grating Pressure Sensor Based on Corrugated Diaphragm

    Institute of Scientific and Technical Information of China (English)

    FU Hai-wei; FU Jun-mei; QIAO Xue-guang

    2004-01-01

    A kind of fiber Bragg grating pressure sensor based on corrugated diaphragm is proposed. The relationship between the central wavelength of reflective wave of FBG and pressure is given, and the expression of the pressure sensitivity coefficient is also given. Within the range from results agree with the theoretical analysis. It is indicated that the expected pressure sensitivity of the sensor can be obtained by optimizing the size and mechanical parameters of the corrugated diaphragm.

  2. Competition and Co-operation in the Corrugated Paper

    OpenAIRE

    Nilsson, Carl-Henric; Axelson, Johan; Emanuelsson, Martin

    2000-01-01

    This paper describes how the five Swedish corrugated box manufacturers, while still in fierce competition, got together in 1999 to fight a new logistic system, plastic crates, which threatened to overtake a substantial part of the Swedish market for transport packaging. It explains the background of SWIF 2000, the competitive response by the five Swedish corrugated box manufacturers, how the strategy was developed, and what made the competitors work together. Many driving forces influence com...

  3. Impact of Corrugated Paperboard Structure on Puncture Resistance

    Directory of Open Access Journals (Sweden)

    Vaidas Bivainis

    2015-03-01

    Full Text Available Thanks to its excellentprotective properties, lightness, a reasonable price, and ecology, corrugated paperboardis one of the most popular materials used in the production of packaging for variousproducts. During transportation or storage, packaging with goods can be exposedto the mass of other commodities, dropping from heights and transportationshock loads, which can lead to their puncture damage. Depending on the purposeand size of the packaging, the thickness, grammage, constituent paper layers,numbers of layers and type of fluting of corrugated paperboard used in itsproduction differ. A standard triangular prism, corrugated paperboard fixationplates and a universal tension-compression machine were used to investigate theimpact of corrugated paperboard structure and other parameters on the punctureresistance of the material. The investigation determines the maximum punctureload and estimates energy required to penetrate the corrugated paperboard. Itwas found that the greatest puncture resistance is demonstrated by paperboardwith a larger number of corrugating flutings and the board produced from harderpaper with a smaller amount of recycled paper. It was established that thegrammage of three-layered paperboard with two different fluting profiles has thegreatest impact on the level of static puncture energy.DOI: http://dx.doi.org/10.5755/j01.ms.21.1.5713

  4. Heat transfer enhancement in two-start spirally corrugated tube

    Directory of Open Access Journals (Sweden)

    Zaid S. Kareem

    2015-09-01

    Full Text Available Various techniques have been tested on heat transfer enhancement to upgrade the involving equipment, mainly in thermal transport devices. These techniques unveiled significant effects when utilized in heat exchangers. One of the most essential techniques used is the passive heat transfer technique. Corrugations represent a passive technique. In addition, it provides effective heat transfer enhancement because it combined the features of extended surfaces, turbulators and artificial roughness. Therefore, A Computational Fluid Dynamics was employed for water flowing at low Reynolds number in spiral corrugated tubes. This article aimed for the determination of the thermal performance of unique smooth corrugation profile. The Performance Evaluation Criteria were calculated for corrugated tubes, and the simulation results of both Nusselt number and friction factor were compared with those of standard plain and corrugated tubes for validation purposes. Results showed the best thermal performance range of 1.8–2.3 for the tube which has the severity of 45.455 × 10−3 for Reynolds number range of 100–700. The heat transfer enhancement range was 21.684%–60.5402% with friction factor increase of 19.2–36.4%. This indicated that this creative corrugation can improve the heat transfer significantly with appreciably increasing friction factor.

  5. Silo with a Corrugated Sheet Wall

    Science.gov (United States)

    Németh, Csaba; Brodniansky, Ján

    2013-09-01

    Silos and tanks are currently being used to create reserves of stored materials. Their importance is based on balancing the production and consumption of bulk materials to establish an adequate reserve throughout the year. The case study introduced within the framework of this paper focuses on thin-walled silos made of corrugated sheets and on an approach for designing these types of structures. The storage of bulk materials causes compression or tensile stresses in the walls of a silo structure. The effect of a frictional force in the silo walls creates an additional bending moment in a wave, which ultimately affects the resulting bending moments. Several mathematical and physical models were used in order to examine various types of loading and their effects on a structure. Subsequently, the accuracy of the computational models was verified by experimental measurements on a grain silo in Bojničky, Slovakia. A comparison of the experimental and mathematical models shows a reasonable match and confirms the load specifications, while indicating that the mathematical model was correct.

  6. Nonlinear vibration of corrugated shallow shells under Uniform load

    Institute of Scientific and Technical Information of China (English)

    YUAN Hong; LIU Ren-huai

    2007-01-01

    Based on the large deflection dynamic equations of axisymmetric shallow shells of revolution,the nonlinear forced vibration of a corrugated shallow shell under uniform load is investigated.The nonlinear partial differential equations of shallow shell are reduced to the nonlinear integral-differential equations by the method of Green's function. To solve the integral-differential equations,expansion method is used to obtain Green's function.Then the integral-differential equations are reduced to the form with degenerate core by expanding Green's function as series of characteristic function.Therefore,the integral-differential equations become nonlinear ordinary differential equations with regard to time. The amplitude-frequency response under harmonic for is obtained by considering single mode vibration.As a numerical example,forced vibration phenomena of shallow spherical shells with sinusoidal corrugation are studied.The obtained solutions are available for reference to design of corrugated shells

  7. A corrugated termination shock in pulsar wind nebulae?

    CERN Document Server

    Lemoine, M

    2016-01-01

    Successful phenomenological models of pulsar wind nebulae assume efficient dissipation of the Poynting flux of the magnetized electron-positron wind as well as efficient acceleration of the pairs in the vicinity of the termination shock, but how this is realized is not yet well understood. The present paper suggests that the corrugation of the termination shock, at the onset of non-linearity, may lead towards the desired phenomenology. Non-linear corrugation of the termination shock would convert a fraction of order unity of the incoming ordered magnetic field into downstream turbulence, slowing down the flow to sub-relativistic velocities. The dissipation of turbulence would further preheat the pair population on short length scales, close to equipartition with the magnetic field, thereby reducing the initial high magnetization to values of order unity. Furthermore, it is speculated that the turbulence generated by the corrugation pattern may sustain a relativistic Fermi process, accelerating particles close...

  8. MONITORING OF TRACK SECTIONS WITH LONG-PITCH CORRUGATION

    Directory of Open Access Journals (Sweden)

    Jan Valehrach

    2016-09-01

    Full Text Available The focus of this paper lies on monitoring of the track sections with rail corrugations caused by wheel sliding. Short waves on the running surface of the rail head on low rail are typical for this defect. Long-pitch corrugation is a significant cause of vibration and noise pollution in the railway infrastructure. Therefore it is very important to understand the formation and development of this imperfection of the rails. Measurements were carried out in curves of small radii on several tracks in the Czech Republic. In addition to the measurement of the surface of the rail head a number of supplementary parameters was evaluated for each section, such as curve radius, superelevation, track gauge etc. and the speed of passing trains as well. This paper describes rail corrugation defect and its development. Our early results are presented in the Conclusions.

  9. Experimental investigation of heat transfer and friction factor in a corrugated plate heat exchanger

    National Research Council Canada - National Science Library

    Shive Dayal Pandey, V.K. Nema

    2011-01-01

    Experiments are conducted to determine the heat transfer characteristics for fully developed flow of air and water flowing in alternate corrugated ducts with an inter-wall spacing equal to the corrugation height...

  10. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1982-01-01

    A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, up-dated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasised. The bibliography has been considerably enlarged to incorporate much valuable new information. Thus readers of the previous edition, which has established

  11. Numerical modeling of manufacturing process of corrugated plate

    Directory of Open Access Journals (Sweden)

    Khodos Ol'ga Aleksandrovna

    2014-09-01

    Full Text Available The rigidity increase of structures consisting of plates and shells is a relevant task. One way to obtain plates with enhanced stiffness performance is the corrugation, i.e. change of its topography elevation. Depending on the method, corrugation provides a plate with additional rigidity in one or several directions without weight gain. The most common way to get corrugated plates is pressure forming. The problem of finding the most energy saving method is very relevant. In this regard, a possible approach is to use buckling of thin cylinder. The idea of this technique comes from the fact that as a result of stability loss of cylindrical shell in compression along its elements, the cylinder walls are deformed periodically. The article considers the problem of corrugated plates manufacturing using smooth sheet metal. The method of manufacture is based on irreversible process of cylindrical buckling of a shell previously obtained from a worksheet. Such a deformation process may be useful if the energy spent on its implementation is smaller than the energy in standard process of forming. The task of defining the stiffness of a corrugated plate is quite difficult because it is difficult to experimentally measure the tension, bending and coupled stiffness. The numerical simulation of three ways to manufacture corrugated cylindrical shell made of smooth sheet by elastic-plastic deformation process are offered: the first way is to deform the cylindrical shell under the action of axial load on the butt end, and the second way is the influence of strutting internal pressure. In the third way the cylindrical shell is made of the leaf using the special techniques. In order to compare the effectiveness of the options presented for each case the internal energy is calculated. It is shown that the energy expenditure in buckling method is the smallest.

  12. Analytical Evaluation of Fibre-Reinforced Plastic Corrugated Sheet

    Directory of Open Access Journals (Sweden)

    C. K. Gautam

    1998-01-01

    Full Text Available Fibre-reinforced' composites playa lead role as advanced materials in modem day structures.This paper reports fabrication and testing offibre-reinforced corrugated sheet employing 4-point bend loading. An in-depth analysis has been carried out using ANSYS, a finite element method package.The theoretical results obtained are compared with the experimental values. The values ofboth inputsshowed similar results. conforming at a particular boundary condition. However, more similarexperiments "on such fibre-reinforced plastic corrugated sheets have been suggested for -better comparison.

  13. Corrugated capillary as THz Cherenkov Smith-Purcell radiator

    Science.gov (United States)

    Lekomtsev, K. V.; Aryshev, A. S.; Tishchenko, A. A.; Ponomarenko, A. A.; Sukharev, V. M.; Terunuma, N.; Urakawa, J.; Strikhanov, M. N.

    2016-07-01

    In this article we discussed Particle In Cell electromagnetic simulations and mechanical design of dielectric capillaries that produce THz Cherenkov Smith-Purcell radiation (ChSPR), arising when a femtosecond electron multi-bunch beam propagates through corrugated and non-corrugated dielectric capillaries with metallic radiation reflectors. We investigated the influence of the four-bunch beam on the SPR field spectrum and on the ChSPR power spectrum, and the influence of the non-central beam propagation on the ChSPR power spectrum. We also discussed the design and assembly of the capillaries, constructed as sets of cylindrical rings.

  14. Selecting the form of plate corrugations of heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Pavlenko, V.F.; Nagornyi, V.E.; Dolinskii, V.M.; Kolokolova, T.G.; Chekhov, O.S.

    1987-03-01

    The authors, in the interest of enhancing the thermal efficiency of plate-type heat exchangers, seek to optimize the pattern and size of the corrugations and surface area of these plates as well as their thickness by assessing the corrosion and scale protection afforded by thermoplastic coatings applied to the carbon steels used in the plates. They test the coatings for the effects of pressure, temperature, and various corrosive media, and demonstrate a parametric technique for optimizing pressure and temperature distribution over the corrugated area, for reducing the potential for deformation, and for prolonging plate durability.

  15. A corrugated termination shock in pulsar wind nebulae?

    Science.gov (United States)

    Lemoine, Martin

    2016-08-01

    Successful phenomenological models of pulsar wind nebulae assume efficient dissipation of the Poynting flux of the magnetized electron-positron wind as well as efficient acceleration of the pairs in the vicinity of the termination shock, but how this is realized is not yet well understood. This paper suggests that the corrugation of the termination shock, at the onset of nonlinearity, may lead towards the desired phenomenology. Nonlinear corrugation of the termination shock would convert a fraction of order unity of the incoming ordered magnetic field into downstream turbulence, slowing down the flow to sub-relativistic velocities. The dissipation of turbulence would further preheat the pair population on short length scales, close to equipartition with the magnetic field, thereby reducing the initial high magnetization to values of order unity. Furthermore, it is speculated that the turbulence generated by the corrugation pattern may sustain a relativistic Fermi process, accelerating particles close to the radiation reaction limit, as observed in the Crab nebula. The required corrugation could be induced by the fast magnetosonic modes of downstream nebular turbulence; but it could also be produced by upstream turbulence, either carried by the wind or seeded in the precursor by the accelerated particles themselves.

  16. Fatigue behaviour of welded joints assembled by longitudinal corrugated plates

    Institute of Scientific and Technical Information of China (English)

    王志宇; 王清远; 刘永杰; 孙美

    2015-01-01

    Fatigue is usually the cause for the cracks identified at bridge elements in service. With an increase in the introduction of corrugated steel web girders in recent highway bridge construction, the understanding of the fatigue behaviour of welded details in such structures becomes an important issue for the design. The typical welded details were represented as welded joints assembled by longitudinal corrugated plates. All the experiments were performed under fatigue loading using a servo-control testing machine. The test results from the failure mode observation with the aid of infrared thermo-graph technology show that the failure manner of these welded joints is comparable to that of the corrugated steel web beams reported previously. It is indicated from the stiffness degradation analysis that the welded joints with larger corrugation angle have higher stiffness and greater stiffness degradation in the notable stiffness degradation range. It is shown from the testS−N relations based on the free regression and forced regression analyses that there is a good linear dependence between lg(N) and lg(ΔS). It is also demonstrated that the proposed fracture mechanics analytical model is able to give a prediction slightly lower but on the safe side for the mean stresses at 2 million cycles of the test welded joints.

  17. Molecule scattering from solid surfaces : Orientation and surface corrugation effects

    NARCIS (Netherlands)

    Vicanek, M; Schlatholter, T; Heiland, W

    1997-01-01

    Various effects connected with orientation and surface corrugation in molecule scattering from solid surfaces are investigated by means of classical trajectories simulations for H-2 impinging on Pd(110). Primary excitation of the projectiles is modeled according to the situation in molecular beam ex

  18. Leading- and next-to-leading-order lateral Casimir force on corrugated surfaces

    CERN Document Server

    Cavero-Pelaez, Ines; Parashar, Prachi; Shajesh, K V

    2008-01-01

    We derive explicit analytic expressions for the lateral force for two different configurations with corrugations, parallel plates and concentric cylinders. By making use of the multiple scattering formalism, we calculate the force for a scalar field under the influence of a delta-function potential that has sinusoidal dependence in one direction simulating the corrugations. By making a perturbative expansion in the amplitude of the corrugation we find the leading order for the corrugated concentric cylinders and the next-to-leading order for the corrugated parallel plates.

  19. SIMULATION AND ANALYSIS OF FLOW PATTERN IN CROSS-CORRUGATED PLATE HEAT EXCHANGERS

    Institute of Scientific and Technical Information of China (English)

    ZHANG Guan-min; TIAN Mao-cheng; ZHOU Shou-jun

    2006-01-01

    Using numerical methodology, the flow fields between two corrugated plates with different values of the corrugation inclination angle β were simulated.The simulation results directly indicate that β affects the flow pattern between corrugated plates, and the results are in good agreement with the experimental results reported by interrelated literature.The results show that the flow pattern between the two plates changes from "double cross-flow" to "zigzag flow" with the increase in β.The reason for the effect on the flow pattern between the two corrugated plates was discussed from the view of the variation of momentum in the direction of corrugation with the variation in β.

  20. Fundamentals of piping design

    CERN Document Server

    Smith, Peter

    2013-01-01

    Written for the piping engineer and designer in the field, this two-part series helps to fill a void in piping literature,since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design(CAD) era. Technology may have changed, however the fundamentals of piping rules still apply in the digitalrepresentation of process piping systems. The Fundamentals of Piping Design is an introduction to the designof piping systems, various processes and the layout of pipe work connecting the major items of equipment forthe new hire, the engineering student and the vetera

  1. Condensation of refrigerants flowing inside smooth and corrugated tubes

    Energy Technology Data Exchange (ETDEWEB)

    Hinton, D.L. [Tennessee State Univ., Nashville, TN (United States); Conklin, J.C.; Vineyard, E.A. [Oak Ridge National Lab., TN (United States)

    1995-07-01

    Because heat exchanger thermal performance has a direct fluence on the overall cycle performance of vapor-compression refrigeration machinery,enhanced heat transfer surfaces are of interest to improve the efficiency of heat pumps and air conditioners. We investigated R-22 and a nonazeotropic refrigerant mixture (NARM) of 75% R-143a and 25% R-124 (by mass) to study their thermal performance in a condenser made of conventional smooth tubes and another condenser made of corrugated, or spirally indented, tubes. We investigated the condensing heat transfer and pressure drop characteristics in an experimental test loop model of a domestic beat pump system employing a variable speed compressor. The refrigerant circulates inside the central tube and the water circulates in the annulus. At refrigerant mass fluxes of approximately 275--300 kg/m{sup 2}s, the measured irreversible pressure drop of the corrugated surface was 23% higher than that of the smooth surface for the R-22. At refrigerant mass fluxes of 350-370 kg/m{sup 2}s, the irreversible pressure drop of the corrugated surface was 36% higher than that of the smooth surface for the NARM. The average heat transfer coefficient for the corrugated surface for R-22 was roughly 40% higher than that for the smooth tube surface at refrigerant mass fluxes of 275--295 kg/m{sup 2}s. The average heat transfer coefficient for the corrugated surface for the NARM was typically 70% higher than that for the smooth tube surface at refrigerant mass fluxes of 340--385 kg/m{sup 2}s.

  2. On the Fully-Developed Heat Transfer Enhancing Flow Field in Sinusoidally, Spirally Corrugated Tubes Using Computational Fluid Dynamics

    DEFF Research Database (Denmark)

    Hærvig, Jakob; Sørensen, Kim; Condra, Thomas Joseph

    2017-01-01

    A numerical study has been carried out to investigate heat transfer enhancing flow field in 28 geometrically different sinusoidally, spirally corrugated tubes. To vary the corrugation, the height of corrugation e/De/D and the length between two successive corrugated sections p/Dp/D are varied in ...

  3. Restoration of Gruber Wagon Works, Blue Marsh Lake, Berks County, Pennsylvania.

    Science.gov (United States)

    1978-08-11

    Job L.S. $ 21. Painting - - Job L.S. $ 22. Otto Engine Support Systems - - - Job L.S. $ 23. Restoration of Machinery Drive System - - - Job L.5...1.2.2 Corrugated metal pipe arch culvert tailrace section within building. 1.2.3 Underground fuel tank and supply line to Otto Engine . 1.3 Applicable

  4. 波纹管圆柱定型模板施工技术%CONSTRUCTION TECHNIQUE OF TYPIFIED FORMWORK FOR CORRUGATED TUBE COLUMN

    Institute of Scientific and Technical Information of China (English)

    李海生; 张肇庆; 胡志军; 王洋; 章亮亮

    2011-01-01

    In the column construction of ZTE Nanjing Research and Development Center No.l Building, high-density polyethylene double-wall corrugated tubes with same diameter are used for formwork, which has smooth inner wall, high strength, light weight and annular corrugated outer wall. The pipe rigidity is increased obviously to avoid deformation; two semicircles are connected together to reduce the number of joint and to improve the forming quality of concrete after the formwork is removed. Compared with same type of typified steel formwork, the corrugated tube formwork has lower cost, more convenient construction and better economic benefit.%中兴通讯南京研发中心1号楼圆柱施工中,采用了直径相同的高密度聚乙烯双壁波纹管作为模板,该模板内壁光滑、强度高、重量轻,外壁呈现环波纹状结构,增加了管材的刚度,且不易变形;采用两个半圆组拼,减少了拼缝,可提高混凝土拆模后的成型质量.波纹管模板价格远低于同类型的定型钢模板,且施工方便,可取得较好的经济效益.

  5. KEMAMPUAN GENTENG PLASTIK BERGELOMBANG (CORRUGATED PLASTIC SEBAGAI BIOFILTER PARTIKEL AMONIAK DAN BAHAN ORGANIK DI MEDIA BUDIDAYA DAN LIMBAH CAIR BUDIDAYA IKAN (Performance of Corrugated Plastic as Biofilter of Ammonia Particle and Organic Material

    Directory of Open Access Journals (Sweden)

    Muslim Muslim

    2010-07-01

    Sediment (TSS, Suspended Sediment (SS, ammonia and organic matter (COD. The result of the study showed that corrugated plastic effectively reduced TSS, SS, ammonia and COD both within rearing tank and in the outside of rearing tank with removal efficiency: 74.51% and 54.42% (TSS; 39.20% and 49.12% (SS; 19.82% and 14.2% (ammonia; and 24.82% and 22.47% (COD. When corrugated plastic is compared with other materials such as plastic rolls, scrub pads, PVC pipes etc, it is shown that corrugated plastic performed significantly higher removal rate (g/m3/d and specific removal rate (mg/m2/d to ammonia.

  6. Reusable pipe flange covers

    Energy Technology Data Exchange (ETDEWEB)

    Holden, James Elliott (Simpsonville, SC); Perez, Julieta (Houston, TX)

    2001-01-01

    A molded, flexible pipe flange cover for temporarily covering a pipe flange and a pipe opening includes a substantially round center portion having a peripheral skirt portion depending from the center portion, the center portion adapted to engage a front side of the pipe flange and to seal the pipe opening. The peripheral skirt portion is formed to include a plurality of circumferentially spaced tabs, wherein free ends of the flexible tabs are formed with respective through passages adapted to receive a drawstring for pulling the tabs together on a back side of the pipe flange.

  7. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A; Parisher

    2000-01-01

    Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

  8. Geometrical investigations of the Casimir effect: Thickness and corrugation dependencies

    Science.gov (United States)

    Parashar, Prachi

    2011-12-01

    decompose the problem into two transverse scalar modes. In Chapter 3 we collect all the solutions for the scalar Green's functions for the planar and the cylindrical geometries, which are relevant for this dissertation. In Chapter 4 we derive the interaction energy between two dielectric slabs of finite thickness. Taking the thickness of the slabs to infinity leads to the Lifshitz results for the two infinite dielectric semi-spaces, while taking the dielectric permittivity to infinity gives the well-known Casimir energy between two perfect conductors. We then present a simple model to consider the thin-plate limit (taking the thickness of the slabs to zero) based on Drude-Sommerfeld free electron gas model, which modifies the plasma frequency of the material to include the finite size dependence. We get a non-vanishing result for the Lifshitz energy in the slab thickness going to zero limit. This is remarkable progress as it allows us to understand the infinitesimal thickness limit and opens a possibility of extending this model to apply it to graphene and other two dimensional surfaces. The Casimir and Casimir-Polder results in the perfect conductor limit give us the expected results. In Chapter 5 we study the lateral Casimir torque between two concentric corrugated cylinders described by delta-potentials, which interact through a scalar field. We derive analytic expressions for the Casimir torque for the case when the corrugation amplitudes are small in comparison to the corrugation wavelengths. We derive explicit results for the Dirichlet case, and exact results for the weak coupling limit, in the leading order. The results for the corrugated cylinders approach the corresponding expressions for the case of corrugated parallel plates in the limit of large radii of the cylinders (relative to the difference in their radii) while keeping the corrugation wavelength fixed. In Chapter 6 we calculate the lateral Casimir energy between corrugated parallel dielectric slabs of

  9. Design and manufacturing of skins based on composite corrugated laminates for morphing aerodynamic surfaces

    Science.gov (United States)

    Airoldi, Alessandro; Fournier, Stephane; Borlandelli, Elena; Bettini, Paolo; Sala, Giuseppe

    2017-04-01

    The paper discusses the approaches for the design and manufacturing of morphing skins based on rectangular-shaped composite corrugated laminates and proposes a novel solution to prevent detrimental effects of corrugation on aerodynamic performances. Additionally, more complex corrugated shapes are presented and analysed. The manufacturing issues related to the production of corrugated laminates are discussed and tests are performed to compare different solutions and to assess the validity of analytical and numerical predictions. The solution presented to develop an aerodynamically efficient skin consists in the integration of an elastomeric cover in the corrugated laminate. The related manufacturing process is presented and assessed, and a fully nonlinear numerical model is developed and characterized to study the behaviour of this skin concept in different load conditions. Finally, configurations based on combinations of individual rectangular-shaped corrugated panels are considered. Their structural properties are numerically investigated by varying geometrical parameters. Performance indices are defined to compare structural stiffness contributions in non-morphing directions with the ones of conventional panels of the same weight. Numerical studies also show that the extension of the concept to complex corrugated shapes may improve both the design flexibility and some specific performances with respect to rectangular shaped corrugations. The overall results validate the design approaches and manufacturing processes to produce corrugated laminates and indicate that the solution for the integration of an elastomeric cover is a feasible and promising method to enhance the aerodynamic efficiency of corrugated skins.

  10. Road Bridges and Culverts, Road Bridges point, lines, polygons in Iredell County, NC, Published in 2005, 1:2400 (1in=200ft) scale, Iredell County GIS.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Orthoimagery information as of 2005. It is described...

  11. Road Bridges and Culverts, Bridges - digitized from 2008 aerials by Furgro Earthdata, Published in 2008, 1:2400 (1in=200ft) scale, Effingham County Board Of Commissioners.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Orthoimagery information as of 2008. It is described...

  12. Road Bridges and Culverts, Bridge inventory, Published in 2007, 1:1200 (1in=100ft) scale, Town of Cary NC.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2007. It is described...

  13. Road Bridges and Culverts, Lyon County Bridges, Published in 2010, 1:4800 (1in=400ft) scale, City of Emporia/Lyon County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:4800 (1in=400ft) scale, was produced all or in part from Hardcopy Maps information as of 2010. It is described...

  14. Road Bridges and Culverts, County Maintained Bridges, Published in 2010, 1:1200 (1in=100ft) scale, Lumpkin County, GA.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2010. It is described...

  15. Railroad Bridges and Culverts, All railroad bridges for the state of Michigan, Published in 2009, 1:2400 (1in=200ft) scale, Office of Shared Solutions.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Railroad Bridges and Culverts dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Field Survey/GPS information as of 2009. It is...

  16. Road Bridges and Culverts, Points documenting bridge class, road carry, and intersecting feature, Published in 2010, 1:1200 (1in=100ft) scale, Allegany County Government.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2010. It is described...

  17. Road Bridges and Culverts, Road Structures, Published in 2005, 1:1200 (1in=100ft) scale, Iowa Department of Transportation.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2005. It is described...

  18. Road Bridges and Culverts, 2006 2' contours; autocad dwg, bridge layer, Published in 2006, 1:1200 (1in=100ft) scale, Washoe County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2006. It is described...

  19. computing techniques for production scheduling in Corrugator manufacturing plants

    Directory of Open Access Journals (Sweden)

    Germán A. Velásquez D.

    2007-01-01

    Full Text Available The corrugator scheduling problem is a difficult problem due to a wide variety of parameters and optimisation objectives that have to be accounted for and the relationships among them. Majority of solution techniques proposed so far only deal with minimizing either, the trim waste or pattern changes, this paper proposes a multi-objective evolutionary algorithm to optimize the WPL objective (weighted planning level and the cost objectives. Computational experiments were conducted and results were compared against the current shop scheduling method used at a real-life corrugator manufacturing facility. A series of experiments were also conducted to determine the evolutionary algorithm parameters. The improvement on performance metrics encourages us to actually implement the algorithm at the factory

  20. Dispersion of helically corrugated waveguides: Analytical, numerical, and experimental study

    Science.gov (United States)

    Burt, G.; Samsonov, S. V.; Ronald, K.; Denisov, G. G.; Young, A. R.; Bratman, V. L.; Phelps, A. D.; Cross, A. W.; Konoplev, I. V.; He, W.; Thomson, J.; Whyte, C. G.

    2004-10-01

    Helically corrugated waveguides have recently been studied for use in various applications such as interaction regions in gyrotron traveling-wave tubes and gyrotron backward-wave oscillators and as a dispersive medium for passive microwave pulse compression. The paper presents a summary of various methods that can be used for analysis of the wave dispersion of such waveguides. The results obtained from an analytical approach, simulations with the three-dimensional numerical code MAGIC, and cold microwave measurements are analyzed and compared.

  1. Measuring autogenous strain of concrete with corrugated moulds

    DEFF Research Database (Denmark)

    Tian, Qian; Jensen, Ole Mejlhede

    2008-01-01

    A reliable technique to quantify autogenous strain is a prerequisite to numerical modeling in stress calculations for high performance concrete. The introducing of a special kind of corrugated tube mould helps to transforming volume strain measurement into liner strain measurement in horizontal...... direction for fluid concrete, which not only realizes the continuous monitoring of the autogenous shrinkage since casting, but also effectively eliminates the disturbance resulting from gravity, temperature variation and mould restraint on measuring results. Based on this measuring technique, this paper...

  2. Leagile Supply Chain Strategy of Indonesian Corrugated Box Manufacturer

    OpenAIRE

    Daryanto, Yosef

    2010-01-01

    Leagile supply chain is the combination of the lean and agile paradigms within a total supply chain strategy, for example by positioning the decoupling point to enable a levelscheduling and opening up an opportunity to drive down costs upstream while simultaneously still ensuring that there is an agile response capable of delivering to an unpredictable marketplace. The purpose of this paper is to support this hybrid leagile supplt chain understanding through case study in an Indonesian corrug...

  3. On the isothermal geometry of corrugated graphene sheets

    OpenAIRE

    Trzesowski, Andrzej

    2013-01-01

    Variational geometries describing corrugated graphene sheets are proposed. The isothermal thermomechanical properties of these sheets are described by a 2-dimensional Weyl space. The equation that couples the Weyl geometry with isothermal distributions of the temperature of graphene sheets, is formulated. This material space is observed in a 3-dimensional orthogonal configurational point space as regular surfaces which are endowed with a thermal state vector field fulfilling the isothermal th...

  4. Analytical Evaluation of Fibre-Reinforced Plastic Corrugated Sheet

    OpenAIRE

    C. K. Gautam; R. C. Pathak

    1998-01-01

    Fibre-reinforced' composites playa lead role as advanced materials in modem day structures.This paper reports fabrication and testing offibre-reinforced corrugated sheet employing 4-point bend loading. An in-depth analysis has been carried out using ANSYS, a finite element method package.The theoretical results obtained are compared with the experimental values. The values ofboth inputsshowed similar results. conforming at a particular boundary condition. However, more similarexperiments "on ...

  5. BEAM PIPE IS INSTALLED

    CERN Multimedia

    The installation of the central section of the beam pipe into the heart of the  CMS was completed by 23 April. All the beam pipe elements have been successfully vacuum-tested and the bakeout started.  

  6. Non-contact gears: II. Casimir torque between concentric corrugated cylinders for the scalar case

    CERN Document Server

    Cavero-Pelaez, Ines; Parashar, Prachi; Shajesh, K V

    2008-01-01

    The Casimir interaction between two concentric corrugated cylinders provides the mechanism for non-contact gears. To this end, we calculate the Casimir torque between two such cylinders, described by $\\delta$-potentials, which interact through a scalar field. We derive analytic expressions for the Casimir torque for the case when the corrugation amplitudes are small in comparison to the corrugation wavelengths. We derive explicit results for the Dirichlet case, and exact results for the weak coupling limit, in the leading order. The results for the corrugated cylinders approach the corresponding expressions for the case of corrugated parallel plates in the limit of large radii of cylinders (relative to the difference in their radii) while keeping the corrugation wavelength fixed.

  7. Analysis of wheel motion on corrugated rail; Corrugation ga hasseishita rail wo sokosuru sharin no undo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Horie, A. [Tokyo Gas Co. Ltd., Tokyo (Japan); Ikuta, S.; Suda, Y. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science] Terumichi, Y. [Sophia University, Tokyo (Japan). Faculty of Science and Technology; Ono, S. [The University of Tokyo, Tokyo (Japan)

    1998-09-01

    An analysis is conducted into the compound vibration of a wheel/rail system which is a two-axle truck travelling on rails with corrugation type wear generated thereon. Each wheel is analyzed using an analysis model in which the travelling mass, contact spring (concentrated mass system of one degree of freedom), and rails provide a system of distributed constants. Calculation is then made about the variation in the contact force that occurs between the wheels and rails when the truck travels at a prescribed speed in a sector with corrugation (assumed to be sinusoidal) generated on the rails therein. It is then found that there is interaction between the front wheels and rear wheels, that the lateral vibration generated by the excitation of rails due to the traveling of the front wheels is transmitted through the rails to reach the rear wheels for their excitation for an increase in the variation in the contact force between the rear wheels and rails and that, vice versa, the travel of the rear wheels increases the variation in the contact force between the front wheels and rails. It is also found, concerning both front wheels and rear wheels, that there are periodic fluctuations, dependent on the wheelbase, in the amplitude of the contact force variation at the steady state and that the period, as compared with the wavelength of corrugation, is shorter in the front wheels and longer in the rear wheels. 4 refs., 5 figs.

  8. Quasi-phase-matched high harmonic generation in corrugated micrometer-scale waveguides

    CERN Document Server

    Husakou, Anton

    2016-01-01

    The high harmonic generation in periodically corrugated submicrometer waveguides is studied numerically. Plasmonic field enhancement in the vicinity of the corrugations allows to use low pump intensities. Simultaneously, periodic placement of the corrugations leads to quasi-phase-matching and corresponding increase of the high harmonic efficiency. The optimization of waveguide geometry is performed, and the resulting spectra are analyzed by the means of (1+1)D numerical model.

  9. Geometrical parameters influence on behavior of the sandwich plates with corrugated core

    Directory of Open Access Journals (Sweden)

    Djoković Jelena M.

    2016-01-01

    Full Text Available The influence of geometric parameters on behavior and stiffness of sandwich plates with corrugated core is considered in this paper. The following parameters were analyzed: ratio of core sheet and facing sheet thickness and the ratio of the core’s pitch to the core’s depth, as well as the corrugation angle. It is shown that changes of these parameters can contribute to increase or decrease of the corrugated sandwich plate stiffness.

  10. Intrinsic and extrinsic corrugation of monolayer graphene deposited on SiO2

    OpenAIRE

    Geringer, V.; Liebmann, M.; Echtermeyer, T.; Runte, S.; Schmidt, M.; Rückamp, R.; Lemme, M.; Morgenstern, M.

    2008-01-01

    Using scanning tunneling microscopy (STM) in ultra high vacuum and atomic force microscopy, we investigate the corrugation of graphene flakes deposited by exfoliation on a Si/SiO2 (300 nm) surface. While the corrugation on SiO2 is long-range with a correlation length of about 25 nm, some of the graphene monolayers exhibit an additional corrugation with a preferential wave length of about 15 nm. A detailed analysis shows that the long range corrugation of the substrate is also visible on graph...

  11. Impedance modelling of pipes

    Science.gov (United States)

    Creasy, M. Austin

    2016-03-01

    Impedance models of pipes can be used to estimate resonant frequencies of standing waves and model acoustic pressure of closed and open ended pipes. Modelling a pipe with impedance methods allows additional variations to the pipe to be included in the overall model as a system. Therefore an actuator can be attached and used to drive the system and the impedance model is able to include the dynamics of the actuator. Exciting the pipe system with a chirp signal allows resonant frequencies to be measured in both the time and frequency domain. The measurements in the time domain are beneficial for introducing undergraduates to resonances without needing an understanding of fast Fourier transforms. This paper also discusses resonant frequencies in open ended pipes and how numerous texts incorrectly approximate the resonant frequencies for this specific pipe system.

  12. Overall Thermal Performance of Flexible Piping Under Simulated Bending Conditions

    Science.gov (United States)

    Fesmire, James E.; Augustynowicz, S. D.; Demko, J. A.; Thompson, Karen (Technical Monitor)

    2001-01-01

    Flexible, vacuum-insulated transfer lines for low-temperature applications have higher thermal losses than comparable rigid lines. Typical flexible piping construction uses corrugated tubes, inner and outer, with a multilayer insulation (MLI) system in the annular space. Experiments on vacuum insulation systems in a flexible geometry were conducted at the Cryogenics Test Laboratory of NASA Kennedy Space Center. The effects of bending were simulated by causing the inner tube to be eccentric with the outer tube. The effects of spacers were simulated in a controlled way by inserting spacer tubes for the length of the cylindrical test articles. Two material systems, standard MLI and a layered composite insulation (LCI), were tested under the full range of vacuum levels using a liquid nitrogen boiloff calorimeter to determine the apparent thermal conductivity (k-value). The results indicate that the flexible piping under simulated bending conditions significantly degrades the thermal performance of the insulation system. These data are compared to standard MLI for both straight and flexible piping configurations. The definition of an overall k-value for actual field installations (k(sub oafi)) is described for use in design and analysis of cryogenic piping systems.

  13. High light transmission through thin absorptive corrugated films.

    Science.gov (United States)

    Dmitruk, Nicolas L; Korovin, Alexander V

    2008-05-01

    The enhancement of light transmittance through periodically relief thin absorptive film at surface plasmon polariton excitation conditions, as a function of relief interrelation, was considered theoretically. Our calculation of transmittance-reflectance through periodically relief thin absorptive film was performed in the framework of differential formalism. There are two basic relief interrelation forms, namely, correlated and anticorrelated ones. The obtained spectral and angular dependencies demonstrate an essential increase of surface plasmon polariton peaks in the case of anticorrelated corrugation of film in comparison with the correlated ones.

  14. Effect of long-range structural corrugations on magnetotransport properties of phosphorene in tilted magnetic field

    Science.gov (United States)

    Mogulkoc, A.; Modarresi, M.; Rudenko, A. N.

    2017-08-01

    Rippling is an inherent quality of two-dimensional materials playing an important role in determining their properties. Here, we study the effect of structural corrugations on the electronic and transport properties of monolayer black phosphorus (phosphorene) in the presence of tilted magnetic field. We follow a perturbative approach to obtain analytical corrections to the spectrum of Landau levels induced by a long-wavelength corrugation potential. We show that surface corrugations have a non-negligible effect on the electronic spectrum of phosphorene in tilted magnetic field. Particularly, the Landau levels are shown to exhibit deviations from the linear field dependence. The observed effect become especially pronounced at large tilt angles and corrugation amplitudes. Magnetotransport properties are further examined in the low temperature regime taking into account impurity scattering. We calculate magnetic field dependence of the longitudinal and Hall resistivities and find that the nonlinear effects reflecting the corrugation might be observed even in moderate fields (B <10 T).

  15. Corrugated Textile based Triboelectric Generator for Wearable Energy Harvesting

    Science.gov (United States)

    Choi, A Young; Lee, Chang Jun; Park, Jiwon; Kim, Dogyun; Kim, Youn Tae

    2017-01-01

    Triboelectric energy harvesting has been applied to various fields, from large-scale power generation to small electronics. Triboelectric energy is generated when certain materials come into frictional contact, e.g., static electricity from rubbing a shoe on a carpet. In particular, textile-based triboelectric energy-harvesting technologies are one of the most promising approaches because they are not only flexible, light, and comfortable but also wearable. Most previous textile-based triboelectric generators (TEGs) generate energy by vertically pressing and rubbing something. However, we propose a corrugated textile-based triboelectric generator (CT-TEG) that can generate energy by stretching. Moreover, the CT-TEG is sewn into a corrugated structure that contains an effective air gap without additional spacers. The resulting CT-TEG can generate considerable energy from various deformations, not only by pressing and rubbing but also by stretching. The maximum output performances of the CT-TEG can reach up to 28.13 V and 2.71 μA with stretching and releasing motions. Additionally, we demonstrate the generation of sufficient energy from various activities of a human body to power about 54 LEDs. These results demonstrate the potential application of CT-TEGs for self-powered systems.

  16. A comprehensive track model for the improvement of corrugation models

    Science.gov (United States)

    Gómez, J.; Vadillo, E. G.; Santamaría, J.

    2006-06-01

    This paper presents a detailed model of the railway track based on wave propagation, suitable for corrugation studies. The model analyses both the vertical and the transverse dynamics of the track. Using the finite strip method (FSM), only the cross-section of the rail must be meshed, and thus it is not necessary to discretise a whole span in 3D. This model takes into account the discrete nature of the support, introducing concepts pertaining to the theory of periodic structures in the formulation. Wave superposition is enriched taking into account the contribution of residual vectors. In this way, the model obtains accurate results when a finite section of railway track is considered. Results for the infinite track have been compared against those presented by Gry and Müller. Aside from the improvements provided by the model presented in this paper, which Gry's and Müller's models do not contemplate, the results arising from the comparison prove satisfactory. Finally, the calculated receptances are compared against the experimental values obtained by the authors, demonstrating a fair degree of adequacy. Finally, these receptances are used within a linear model of corrugation developed by the authors.

  17. Heat Pipe Materials Compatibility

    Science.gov (United States)

    Eninger, J. E.; Fleischman, G. L.; Luedke, E. E.

    1976-01-01

    An experimental program to evaluate noncondensable gas generation in ammonia heat pipes was completed. A total of 37 heat pipes made of aluminum, stainless steel and combinations of these materials were processed by various techniques, operated at different temperatures and tested at low temperature to quantitatively determine gas generation rates. In order of increasing stability are aluminum/stainless combination, all aluminum and all stainless heat pipes. One interesting result is the identification of intentionally introduced water in the ammonia during a reflux step as a means of surface passivation to reduce gas generation in stainless-steel/aluminum heat pipes.

  18. Introduction to Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

  19. Heat Pipe Planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2014-01-01

    When volcanism dominates heat transport, a terrestrial body enters a heat-pipe mode, in which hot magma moves through the lithosphere in narrow channels. Even at high heat flow, a heat-pipe planet develops a thick, cold, downwards-advecting lithosphere dominated by (ultra-)mafic flows and contractional deformation at the surface. Heat-pipes are an important feature of terrestrial planets at high heat flow, as illustrated by Io. Evidence for their operation early in Earth's history suggests that all terrestrial bodies should experience an episode of heat-pipe cooling early in their histories.

  20. Investigation into the vibration of metro bogies induced by rail corrugation

    Science.gov (United States)

    Ling, Liang; Li, Wei; Foo, Elbert; Wu, Lei; Wen, Zefeng; Jin, Xuesong

    2017-01-01

    The current research of rail corrugation mainly focuses on the mechanisms of its formation and development. Compared with the root causes and development mechanisms, the wheel-rail impacts, the fatigue failure of vehicle-track parts, and the loss of ride comfort due to rail corrugation should also be taken into account. However, the influences of rail corrugation on vehicle and track vibration, and failure of vehicle and track structural parts are barely discussed in the literature. This paper presents an experimental and numerical investigation of the structural vibration of metro bogies caused by rail corrugation. Extensive experiments are conducted to investigate the effects of short-pitch rail corrugation on the vibration accelerations of metro bogies. A dynamic model of a metro vehicle coupled with a concrete track is established to study the influence of rail corrugation on the structural vibration of metro bogies. The field test results indicate that the short-pitch rail corrugation generates strong vibrations on the axle-boxes and the bogie frames, therefore, accelerates the fatigue failure of the bogie components. The numerical results show that short-pitch rail corrugation may largely reduce the fatigue life of the coil spring, and improving the damping value of the primary vertical dampers is likely to reduce the strong vibration induced by short-pitch rail corrugation. This research systematically studies the effect of rail corrugation on the vibration of metro bogies and proposes some remedies for mitigating strong vibrations of metro bogies and reducing the incidence of failure in primary coil springs, which would be helpful in developing new metro bogies and track maintenance procedures.

  1. Explosive welding of pipes

    Energy Technology Data Exchange (ETDEWEB)

    Drennov, O.; Burtseva, O.; Kitin, A. [Russian Federal Nuclear Center, Sarov (Russian Federation)

    2006-08-15

    Arrangement of pipelines for the transportation of oil and gas is a complicated problem. In this paper it is suggested to use the explosive welding method to weld pipes together. This method is rather new. This method can be advantageous (saving material and physical resources) comparing to its static analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. We suggest to perform explosive welding according to the following scheme: the ends of the 2 pipes are connected, the external surfaces are kept at a similar level. A cylindrical steel layer of diameter larger than the pipe diameter is set around the pipe joint and an explosive charge is placed on its external surface. The basic problem is the elimination of strains and reduction of pipe diameter in the area of the dynamic effect. The suggestion is to use water as filler: the volume of pipes in the area adjacent to the zone of explosive welding is totally filled with water. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gas dynamic and elastic-plastic calculations we determined non-deformed mass of water. Model experiments with pipes having radii R = 57 mm confirmed results of the calculations and the possibility in principle to weld pipes by explosion with use of water as filler.

  2. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...

  3. A heat pipe

    Energy Technology Data Exchange (ETDEWEB)

    Rachev, L.A.; Kravtsov, A.A.

    1979-02-08

    A thermal pipe is described which contains a hermetically sealed body with a reticular filler. In order to increase the transmitted thermal power, the pipe is equipped with a high voltage source and with insulators, located between the wall of the body and the filler, where the latter is switched in to the high voltage source, preferably an adjustable one.

  4. Oscillating heat pipes

    CERN Document Server

    Ma, Hongbin

    2015-01-01

    This book presents the fundamental fluid flow and heat transfer principles occurring in oscillating heat pipes and also provides updated developments and recent innovations in research and applications of heat pipes. Starting with fundamental presentation of heat pipes, the focus is on oscillating motions and its heat transfer enhancement in a two-phase heat transfer system. The book covers thermodynamic analysis, interfacial phenomenon, thin film evaporation,  theoretical models of oscillating motion and heat transfer of single phase and two-phase flows, primary  factors affecting oscillating motions and heat transfer,  neutron imaging study of oscillating motions in an oscillating heat pipes, and nanofluid’s effect on the heat transfer performance in oscillating heat pipes.  The importance of thermally-excited oscillating motion combined with phase change heat transfer to a wide variety of applications is emphasized. This book is an essential resource and learning tool for senior undergraduate, gradua...

  5. Comparison of manufacturing of lightweight corrugated sheet sandwiches by hydroforming and incremental sheet forming

    Science.gov (United States)

    Maqbool, Fawad; Elze, Lars; Seidlitz, Holger; Bambach, Markus

    2016-10-01

    Sandwich materials made from corrugated sheet metal provide excellent mechanical properties for lightweight design without using filler material. The increased mechanical properties of these sandwich materials are achieved by the 3-D geometry of the corrugated sheet and the hardening due to pre-forming. In the present study, manufacturing of corrugated sheet metal consisting of hexagonal bulge patterns through hydroforming and incremental forming is analyzed. Double layered corrugated sheet metal sandwiches with hexagonal patterns of free-form bulge geometries are investigated through finite element analysis for the maximum increase in stiffness over the normal flat sheets. The analysis shows that a bending stiffness increase of up to 13 times over flat sheet of the same mass is attainable by corrugated sandwiches. Further, it is proved for these types of corrugation sandwiches that stiffness increases by increasing the height of the corrugation bulge but that hydroforming poses restrictions with respect to bulge height, since it is limited by forming force and formability of the material. Incremental sheet metal forming can be used to produce sheets with a hexagonal bulge pattern with increased height. Hence, a higher increase in stiffness as compared to hydroforming is possible but at the expense of process speed.

  6. Study on rail corrugation of a metro tangential track with Cologne-egg type fasteners

    Science.gov (United States)

    Cui, X. L.; Chen, G. X.; Yang, H. G.; Zhang, Q.; Ouyang, H.; Zhu, M. H.

    2016-03-01

    In Chinese metro lines, rail corrugation on both tangential and tight curved tracks with Cologne-egg type fasteners is very severe. Based on the viewpoint of friction-induced vibration causing rail corrugation, the rail corrugation on a tangential track with Cologne-egg type fasteners is studied in this paper. A vibration model of an elastic multiple-wheelset-track system with Cologne-egg type fasteners is established. Both the complex eigenvalue analysis and the transient dynamic analysis are performed to study the stability and the dynamic performance of the wheelset-track system. The simulation results show that a low rail support stiffness value is responsible for rail corrugation on the tangential track. When the Cologne-egg fasteners characterised by a lower stiffness value are replaced with the DTVI2 fasteners characterised by a higher stiffness value, rail corrugation disappears. However, rail corrugation on tight curved tracks cannot be suppressed using the same replacement. The above conclusions are consistent with the corrugation occurrences in actual metro tracks.

  7. Modeling of a corrugated dielectric elastomer actuator for artificial muscle applications

    Science.gov (United States)

    Kadooka, Kevin; Taya, Minoru; Naito, Keishi; Saito, Makoto

    2015-04-01

    Dielectric elastomer actuators have many advantages, including light weight, simplicity, high energy density, and silent operation. These features make them suitable to replace conventional actuators and transducers, especially in artificial muscle applications where large contractile strains are necessary for lifelike motions. This paper will introduce the concept of a corrugated dielectric elastomer actuator (DEA), which consists of dielectric elastomer (DE) laminated to a thin elastic layer to induce bending motion at each of the corrugations, resulting in large axial deformation. The location of the DE and elastic layers can be configured to provide tensile or compressive axial strain. Such corrugated DE actuators are also highly scalable: linking multiple actuators in series results in greater deformation, whereas multiple actuators in parallel results in larger force output. Analytical closed-form solutions based on linear elasticity were derived for the displacement and force output of curved unimorph and corrugated DEA, both consisting of an arbitrary number of lamina. A total strain energy analysis and Castigiliano's theorem were used to predict the nonlinear force-displacement behavior of the corrugated actuator. Curved unimorph and corrugated DEA were fabricated using VHB F9469PC as the DE material. Displacement of the actuators observed during testing agreed well with the modeling results. Large contractile strain (25.5%) was achieved by the corrugated DEA. Future work includes investigating higher performance DE materials such as plasticized PVDF terpolymers, processed by thin film deposition methods.

  8. Numerical investigation of the aerodynamic and structural characteristics of a corrugated wing

    Science.gov (United States)

    Hord, Kyle

    Previous experimental studies on static, bio-inspired corrugated wings have shown that they produce favorable aerodynamic properties such as delayed stall compared to streamlined wings and flat plates at high Reynolds numbers (Re ≥ 4x104). The majority of studies have been carried out with scaled models of dragonfly forewings from the Aeshna Cyanea in either wind tunnels or water channels. In this thesis, the aerodynamics of a corrugated airfoil was studied using computational fluid dynamics methods at a low Reynolds number of 1000. Structural analysis was also performed using the commercial software SolidWorks 2009. The flow field is described by solving the incompressible Navier-Stokes equations on an overlapping grid using the pressure-Poisson method. The equations are discretized in space with second-order accurate central differences. Time integration is achieved through the second-order Crank-Nicolson implicit method. The complex vortex structures that form in the corrugated airfoil valleys and around the corrugated airfoil are studied in detail. Comparisons are made with experimental measurements from corrugated wings and also with simulations of a flat plate. Contrary to the studies at high Reynolds numbers, our study shows that at low Reynolds numbers the wing corrugation does not provide any aerodynamic benefit compared to a smoothed flat plate. Instead, the corrugated profile generates more pressure drag which is only partially offset by the reduction of friction drag, leading to more total drag than the flat plate. Structural analysis shows that the wing corrugation can increase the resistance to bending moments on the wing structure. A smoothed structure has to be three times thicker to provide the same stiffness. It was concluded the corrugated wing has the structural benefit to provide the same resistance to bending moments with a much reduced weight.

  9. Transition from diffusive to localized regimes in surface corrugated waveguides

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Martin, A.; Saenz, J. J. [Universidad Autonoma de Madrid, Madrid (Spain); Nieto-Vesperinas, M. [Instituto de Ciencias de Materiales de Madrid, Madrid (Spain)

    2001-03-01

    Exact calculations of transmission and reflection coefficients in surface randomly corrugated waveguides are presented. The elastic scattering of diffuse light classical waves from a rough surface induces a diffusive transport along the waveguide axis. As the length of the corrugated part of the waveguide increases, a transition from the diffusive to the localized regime is observed. This involves an analogy with electron conduction in nano wires, and hence, a concept analogous to that of resistance can be introduced. An oscillatory behavior of different transport properties (elastic mean free path, localization length, enhanced backscattering), versus the wavelength is predicted. An analysis of the transmission coefficients (transmitted speckle) shows that as the length of the corrugated part of the waveguide increases there is a strong preference to forward coupling through the lowest mode. This marks a clear anisotropy in the forward propagation which is absent in the case of volume disorder. The statistics of reflection coefficients is analyzed, first using random matrix theory (Rm) to analytically deduce the probability densities in the localization regime, afterwards exact numerical calculations of the coupling to backward modes in surface corrugated waveguides will be put forward for comparison. We show that the reflected speckle distribution are independent of the transport regime, at variance with the regime transition found in the transmission case. Despite the strong anisotropy, the analysis of the probability distributions of both transmitted and reflected waves confirms the distributions predicted by Random Matrix Theory for volume disorder. [Spanish] Presentamos calculos exactos de los coeficientes de transmision y reflexion en guias de onda con desorden de superficie. La dispersion elastica de luz difusa o de otras ondas clasicas por una superficie rugosa induce un transporte difusivo a lo largo del eje de la guia. A medida que la longitud de la zona

  10. Modeling noncontact atomic force microscopy resolution on corrugated surfaces

    Directory of Open Access Journals (Sweden)

    Kristen M. Burson

    2012-03-01

    Full Text Available Key developments in NC-AFM have generally involved atomically flat crystalline surfaces. However, many surfaces of technological interest are not atomically flat. We discuss the experimental difficulties in obtaining high-resolution images of rough surfaces, with amorphous SiO2 as a specific case. We develop a quasi-1-D minimal model for noncontact atomic force microscopy, based on van der Waals interactions between a spherical tip and the surface, explicitly accounting for the corrugated substrate (modeled as a sinusoid. The model results show an attenuation of the topographic contours by ~30% for tip distances within 5 Å of the surface. Results also indicate a deviation from the Hamaker force law for a sphere interacting with a flat surface.

  11. An Ant Colony Optimization Algorithm for Microwave Corrugated Filters Design

    Directory of Open Access Journals (Sweden)

    Ivan A. Mantilla-Gaviria

    2013-01-01

    Full Text Available A practical and useful application of the Ant Colony Optimization (ACO method for microwave corrugated filter design is shown. The classical, general purpose ACO method is adapted to deal with the microwave filter design problem. The design strategy used in this paper is an iterative procedure based on the use of an optimization method along with an electromagnetic simulator. The designs of high-pass and band-pass microwave rectangular waveguide filters working in the C-band and X-band, respectively, for communication applications, are shown. The average convergence performance of the ACO method is characterized by means of Monte Carlo simulations and compared with that obtained with the well-known Genetic Algorithm (GA. The overall performance, for the simulations presented herein, of the ACO is found to be better than that of the GA.

  12. Agenesis of the corrugator supercilii: a benign condition.

    Science.gov (United States)

    Alfonso, Israel; Miranda, Luis Felipe; Reeves-Garcia, Jessica; Checa, Rosario Mateos; Guevara, Carlos

    2010-03-01

    We report 2 neonates with frontonasal masses. The frontonasal masses were only present while the neonates were crying. The rest of the general examination and the neurological examination of the neonates were normal. The first patient had an extensive neuroimaging evaluation that included skull radiograph, computed tomography (CT) and magnetic resonance imaging (MRI) of the brain, and ultrasound of the frontonasal mass. The second patient was evaluated with ultrasound of the frontonasal mass. The mother of the second patient had no frontonasal creases and was unable to frown. In both patients, the ultrasonographic studies revealed nonspecific soft tissue thickening in the region of the glabella only while crying. The ultrasonographic findings and the similarity between the mother's findings and those of adult patients receiving botulinum toxin injection to the corrugator supercilii muscle point to the absence of this muscle as the cause of the frontonasal mass in these patients.

  13. Numerical Investigation of the Fully-Developed Periodic Flow Field for Optimal Heat Transfer in Spirally Corrugated Tubes

    DEFF Research Database (Denmark)

    Hærvig, Jakob; Condra, Thomas Joseph; Sørensen, Kim

    Even though the corrugated tube is a widely used technique to enhance transfer heat, the exact heat transfer enhancing mechanism remains relatively un-documented. Most studies attribute the favourable heat transfer characteristics to a swirling flow being present at higher corrugation....... In this study, a systematic approach relying on Computational Fluid Dynamics (CFD) is used to study and compare the heat transfer characteristics with the detailed flow field in the spirally corrugated tubes. By comparing the flow in 12 different spirally corrugated tubes at a fixed Reynolds number of 5000......, this study compares the flow field with the surface averaged Nusselt number to gain valuable insight into which flow phenomena causes favourable heat transfer characteristics. While the flow at low corrugations approximates the non-corrugated tube, higher corrugations of h/D creates a significant tangential...

  14. Geometrical properties of turbulent premixed flames and other corrugated interfaces.

    Science.gov (United States)

    Thiesset, F; Maurice, G; Halter, F; Mazellier, N; Chauveau, C; Gökalp, I

    2016-01-01

    This study focuses on the geometrical properties of turbulent flame fronts and other interfaces. Toward that end, we use an original tool based on proper orthogonal decomposition (POD), which is applied to the interface spatial coordinates. The focus is mainly on the degree of roughness of the flame front, which is quantified through the scale dependence of its coverage arclength. POD is first validated by comparing with the caliper technique. Fractal characteristics are extracted in an unambiguous fashion using a parametric expression which appears to be impressively well suited for representing Richardson plots. Then it is shown that, for the range of Reynolds numbers investigated here, the scale-by-scale contribution to the arclength does not comply with scale similarity, irrespectively of the type of similarity which is invoked. The finite ratios between large and small scales, referred to as finite Reynolds number effects, are likely to explain this observation. In this context, the Reynolds number that ought to be achieved for a proper inertial range to be discernible, and for scale similarity to be likely to apply, is calculated. Fractal characteristics of flame folding are compared to available predictions. It is confirmed that the inner cutoff satisfactorily correlates with the Kolmogorov scale while the outer cutoff appears to be proportional to the integral length scale. However, the scaling for the fractal dimension is much less obvious. It is argued that much higher Reynolds numbers have to be reached for drawing firm statements about the evolution (or constancy) of the fractal dimension with respect to flame and flow parameters. Finally, a heuristic phenomenology of corrugated interfaces is highlighted. The degree of generality of the latter phenomenology is confirmed by comparing the folding of different interfaces including a turbulent-nonturbulent interface, a liquid jet destabilized by a surrounding air jet, a cavitating flow, and an isoscalar

  15. The electronic and magnetic properties of corrugated zigzag graphene nanoribbons with divacancy defects

    Science.gov (United States)

    Tan, Xiao-Dong; Liao, Xiao-Ping; Sun, Litao

    2017-01-01

    We investigate the electronic and magnetic properties of the corrugated zigzag graphene nanoribbons (ZGNRs) with divacancy defects by means of the first principle calculations. We show that the magnitude of corrugation in the defective ZGNR determines whether the system is in the antiferromagnetic state, in the ferromagnetic state, or in the nonmagnetic state. Correspondingly, the mutual transition between the semiconductor and the metal can also be realized in this structure. Moreover, for semiconductors the energy gap displays oscillating behaviors as the magnitude of corrugation increases. These results are identified as being useful in manufacturing flexible devices.

  16. Hydrogen sulfide removal from sediment and water in box culverts/storm drains by iron-based granules.

    Science.gov (United States)

    Sun, J L; Shang, C; Kikkert, G A

    2013-01-01

    A renewable granular iron-based technology for hydrogen sulfide removal from sediment and water in box culverts and storm drains is discussed. Iron granules, including granular ferric hydroxide (GFH), granular ferric oxide (GFO) and rusted waste iron crusts (RWIC) embedded in the sediment phase removed aqueous hydrogen sulfide formed from sedimentary biological sulfate reduction. The exhausted iron granules were exposed to dissolved oxygen and this regeneration process recovered the sulfide removal capacities of the granules. The recovery is likely attributable to the oxidation of the ferrous iron precipitates film and the formation of new reactive ferric iron surface sites on the iron granules and sand particles. GFH and RWIC showed larger sulfide removal capacities in the sediment phase than GFO, likely due to the less ordered crystal structures on their surfaces. This study demonstrates that the iron granules are able to remove hydrogen sulfide from sediment and water in box culverts and storm drains and they have the potential to be regenerated and reused by contacting with dissolved oxygen.

  17. Reeling of tight fit pipe

    NARCIS (Netherlands)

    Focke, E.S.

    2007-01-01

    If it would be possible to install Tight Fit Pipe by means of reeling, it would be an attractive new option for the exploitation of offshore oil and gas fields containing corrosive hydrocarbons. Tight Fit Pipe is a mechanically bonded double walled pipe where a corrosion resistant alloy liner pipe

  18. Experimenting with a "Pipe" Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-01-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here…

  19. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A

    2011-01-01

    Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters

  20. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...... algorithm using successive linear programming is presented. The performance of the algorithm is illustrated by optimizing a network with 201 pipes and 172 nodes. It is concluded that the new algorithm seems to be very efficient and stable, and that it always finds a solution with a cost near the best...

  1. An electrohydrodynamic heat pipe.

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    A heat pipe of new design, using an electrode structure to orient and guide the dielectric liquid phase flow, is proposed. Analysis indicates that the operation of the electrohydrodynamic heat pipe is in direct analogy to capillary devices, with the polarization force acting in place of capillarity. Advantages of these new heat pipes include greatly reduced liquid friction, electrohydrodynamically enhanced evaporation and condensation heat transfer, and a possible voltage-controlled on/off feature. Preliminary calculations indicate that relatively high performance devices are possible.

  2. Electrohydrodynamic heat pipes.

    Science.gov (United States)

    Jones, T. B.

    1973-01-01

    An electrohydrodynamic heat pipe of radical design is proposed which substitutes polarization electrohydrodynamic force effects for capillarity in collecting, guiding, and pumping a condensate liquid phase. The discussed device is restricted to the use of dielectric liquids as working fluids. Because of the relatively poor thermal transport properties of these liquids, capillary heat pipes using these liquids have not been high performance devices. The employment of the electrohydrodynamic concept should enhance this performance and help fill the performance gap that exists in the temperature range from 250 F to 750 F for 'conventional' capillary heat pipes.

  3. Research on Failure Modes and Key Parameters of Corrugated Steel Shear Walls

    Directory of Open Access Journals (Sweden)

    Cao Qiang

    2016-01-01

    Full Text Available The corrugated steel plate shear wall is an effective and economical lateral load resisting system. And the thin steel plate is easy to buckle. And it is necessary to use much more thickness or ribs to prevent the buckle at out of plane direction, which is not economical or complicated to construct. A number of corrugated shear walls are analyzed by nonlinear static pushover analysis method. And failure modes, buckling, the ultimate capacity, and shear force-drift curves are studied. The results showed that the corrugated steel plate can be designed according to the failure modes, in order to have a desirable failure mode that the corrugated steel plate yield before buckling.

  4. Modeling of the plastic flow kinematics in the forming process of the lightweight flange corrugation

    Directory of Open Access Journals (Sweden)

    I. V. Fomenko

    2012-01-01

    Full Text Available The determination of the forming maximum possibilities of the flange corrugation by stretching with a free movement of the billets end in the rigid sectional matrices detachable by the flexible filler.

  5. Effect of rail corrugation on vertical dynamics of railway vehicle coupled with a track

    Institute of Scientific and Technical Information of China (English)

    Xuesong Jin; Kaiyun Wang; Zefeng Wen; Weihua Zhang

    2005-01-01

    The effect of rail corrugation on the vertical dynamics of railway vehicle coupled with a curved track is investigated in detail with a numerical method when a wheelset is steadily curving. In the calculation of rail corrugation we consider the combination of Kalker's rolling contact theory modified, a model of material loss on rail running surface, and a dynamics model of railway vehicle coupled with a curved track. In the establishment of the dynamic model, for simplicity, one fourth of the freight car without lateral motions,namely a wheelset and the equivalent one fourth freight car body above it, is considered. The Euler beam is used to model the rails and the track structure under the rails is replaced with equivalent springs, dampers and mass bodies. The numerical results show the great influence of the rail corrugation on the vibration of the parts of the vehicle and the track, and the some characters of rail corrugation in development.

  6. Pulsed squeezed-light generation in a waveguide with second-subharmonic generation and periodic corrugation

    CERN Document Server

    Perina, Jan

    2013-01-01

    Quantum pulsed second-subharmonic generation in a planar waveguide with a small periodic corrugation at the surface is studied. Back-scattering of the interacting fields on the corrugation enhances the nonlinear interaction giving larger values of squeezing. The problem of back-scattering is treated by perturbation theory, using the Fourier transform for non-dispersion propagation, and by numerical approach in the general case. Optimum spectral modes for squeezed-light generation are found using the Bloch-Messiah reduction. Improvement in squeezing and increase of numbers of generated photons are quantified for the corrugation resonating with the fundamental and second-subharmonic field. Splitting of the generated pulse by the corrugation is predicted.

  7. EFFECT OF DISCRETE SUPPORTS OF RAIL ON INITIATION AND EVOLUTION OF RAIL CORRUGATION

    Institute of Scientific and Technical Information of China (English)

    Jin Xuesong; Wang Kaiyun; Wen Zefeng; Zhang Weihua

    2005-01-01

    The effect of discrete support of rail on the formation and evolution of rail corrugation is primarily investigated with numerical method in the situation of wheelset curving steadily and repeatedly. In the numerical analysis of corrugation it is considered that a combination of Kalker's rolling contact theory with non-Hertzian to be modified, a linear frictional work model and a vertical dynamics model of railway vehicle coupled with a curved track. And the uneven support stiffness of rail in the vertical direction due to discrete sleeper support and the different running speed of the wheelset are taken into consideration. The damage on the running surface of rail, concerning rail corrugation formation, is restricted to wear mechanism of rail material. The numerical results obtained indicate that the discrete supports of rail by sleepers have a great influence on the formation of the corrugation under the condition of non-zero and stable creepages of wheelset and track.

  8. Flexural strengthening of Reinforced Concrete (RC) Beams Retrofitted with Corrugated Glass Fiber Reinforced Polymer (GFRP) Laminates

    Science.gov (United States)

    Aravind, N.; Samanta, Amiya K.; Roy, Dilip Kr. Singha; Thanikal, Joseph V.

    2015-01-01

    Strengthening the structural members of old buildings using advanced materials is a contemporary research in the field of repairs and rehabilitation. Many researchers used plain Glass Fiber Reinforced Polymer (GFRP) sheets for strengthening Reinforced Concrete (RC) beams. In this research work, rectangular corrugated GFRP laminates were used for strengthening RC beams to achieve higher flexural strength and load carrying capacity. Type and dimensions of corrugated profile were selected based on preliminary study using ANSYS software. A total of twenty one beams were tested to study the load carrying capacity of control specimens and beams strengthened with plain sheets and corrugated laminates using epoxy resin. This paper presents the experimental and theoretical study on flexural strengthening of Reinforced Concrete (RC) beams using corrugated GFRP laminates and the results are compared. Mathematical models were developed based on the experimental data and then the models were validated.

  9. Flood magnitude and frequency of Jacks Run at the culvert on U.S. Route 206, Southampton Township, Burlington County, New Jersey

    Science.gov (United States)

    Barringer, Thomas

    1996-01-01

    Flood magnitude and frequency of Jacks Run at the culvert on U.S. Route 206, Southampton Township, New Jersey, were determined by using the rational method. Flood magnitude and frequency estimates, as well as basin characteristics, are included in this report. The 100-year-flood estimate is 29 cubic feet per second.

  10. 箱涵在小型水利工程中的应用%Application of box culvert in small water conservancy projects

    Institute of Scientific and Technical Information of China (English)

    林治鑫; 吴有坤

    2015-01-01

    箱涵在小型水利工程中应用广泛,可以作为堤防、排水沟和小桥涵等建筑物。箱涵在小型水利工程中,具有过流能力强、结构稳定、承载能力高、基础处理简单等特点。本文对小型箱涵结构设计、施工、过流量计算、清淤等进行了详细介绍,供同类工程参考。%Box culvert is widely used in small water conservancy projects, which can be used as dyke, drainage ditch, small bridges and culverts and other buildings. Box culvert is characterized by strong overflow capability, stable structure, high bearing capacity, simple foundation treatment, etc. in small water conservancy projects. In the paper, small box culvert structure design, construction, overflow calculation, dredging, etc. are introduced in detail as reference for similar projects.

  11. An electrohydrodynamic heat pipe

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    Dielectric liquid for transfer of heat provides liquid flow from the condenser section to the evaporator section in conventional heat pipes. Working fluid is guided or pumped by an array of wire electrodes connected to a high-voltage source.

  12. Experimental study of the turbulent convective heat transfer of titanium oxide nanofluid flowing inside helically corrugated tubes

    Energy Technology Data Exchange (ETDEWEB)

    Salimpour, Mohammad Reza; Golmohammadi, Kia; Sedaghat, Ahmad [Isfahan University of Technology, Isfahan (Iran, Islamic Republic of); Campo, Antonio [The University of Texas at San Antonio, San Antonio (United States)

    2015-09-15

    The convective heat transfer for the turbulent flow of water/TiO{sub 2} nanofluid inside helically horizontal corrugated tubes is investigated in this paper using experimental techniques. The tube boundary condition is a uniform wall temperature. The test apparatus was designed and assembled with a test section containing 93 cm copper tubes with internal and external diameters of 7.71 mm and 9.52 mm, respectively. First, the heat transfer characteristics of the distilled water turbulent flow in a plain copper tube were measured preliminarily. Second, various test runs were performed for nanofluids with two nanoparticle concentrations (0.1% and 0.5%), two corrugation depth to diameter ratios (0.0648 and 0.103), two corrugation pitch to diameter ratios (0.917 and 1.297), and two corrugation width to diameter ratios (0.363 and 0.492) that were all within the range of turbulent Reynolds numbers (3000 < Re < 15000). The experimental results reveal that the Nusselt number augments the dual increments in corrugation depth and width and with the decrements in corrugation pitch, particularly for high Reynolds numbers. The nanoparticles have a stronger effect on the heat transfer in helically corrugated tubes with higher corrugation depths and widths as well as lower corrugation pitches. A correlation for the Nusselt number in terms of the helically corrugated tubes is introduced based on the linear regression analysis of the experimental data.

  13. Numerical analysis of sandwich beam with corrugated core under three-point bending

    Energy Technology Data Exchange (ETDEWEB)

    Wittenbeck, Leszek [Poznan University of Technology, Institute of Mathematics Piotrowo Street No. 5, 60-965 Poznan (Poland); Grygorowicz, Magdalena; Paczos, Piotr [Poznan University of Technology, Institute of Applied Mechanics Jana Pawla IIStreet No. 24, 60-965 Poznan (Poland)

    2015-03-10

    The strength problem of sandwich beam with corrugated core under three-point bending is presented.The beam are made of steel and formed by three mutually orthogonal corrugated layers. The finite element analysis (FEA) of the sandwich beam is performed with the use of the FEM system - ABAQUS. The relationship between the applied load and deflection in three-point bending is considered.

  14. Silicon Heat Pipe Array

    Science.gov (United States)

    Yee, Karl Y.; Ganapathi, Gani B.; Sunada, Eric T.; Bae, Youngsam; Miller, Jennifer R.; Beinsford, Daniel F.

    2013-01-01

    Improved methods of heat dissipation are required for modern, high-power density electronic systems. As increased functionality is progressively compacted into decreasing volumes, this need will be exacerbated. High-performance chip power is predicted to increase monotonically and rapidly with time. Systems utilizing these chips are currently reliant upon decades of old cooling technology. Heat pipes offer a solution to this problem. Heat pipes are passive, self-contained, two-phase heat dissipation devices. Heat conducted into the device through a wick structure converts the working fluid into a vapor, which then releases the heat via condensation after being transported away from the heat source. Heat pipes have high thermal conductivities, are inexpensive, and have been utilized in previous space missions. However, the cylindrical geometry of commercial heat pipes is a poor fit to the planar geometries of microelectronic assemblies, the copper that commercial heat pipes are typically constructed of is a poor CTE (coefficient of thermal expansion) match to the semiconductor die utilized in these assemblies, and the functionality and reliability of heat pipes in general is strongly dependent on the orientation of the assembly with respect to the gravity vector. What is needed is a planar, semiconductor-based heat pipe array that can be used for cooling of generic MCM (multichip module) assemblies that can also function in all orientations. Such a structure would not only have applications in the cooling of space electronics, but would have commercial applications as well (e.g. cooling of microprocessors and high-power laser diodes). This technology is an improvement over existing heat pipe designs due to the finer porosity of the wick, which enhances capillary pumping pressure, resulting in greater effective thermal conductivity and performance in any orientation with respect to the gravity vector. In addition, it is constructed of silicon, and thus is better

  15. Stuck pipe prediction

    KAUST Repository

    Alzahrani, Majed

    2016-03-10

    Disclosed are various embodiments for a prediction application to predict a stuck pipe. A linear regression model is generated from hook load readings at corresponding bit depths. A current hook load reading at a current bit depth is compared with a normal hook load reading from the linear regression model. A current hook load greater than a normal hook load for a given bit depth indicates the likelihood of a stuck pipe.

  16. Heat pipe dynamic behavior

    Science.gov (United States)

    Issacci, F.; Roche, G. L.; Klein, D. B.; Catton, I.

    1988-01-01

    The vapor flow in a heat pipe was mathematically modeled and the equations governing the transient behavior of the core were solved numerically. The modeled vapor flow is transient, axisymmetric (or two-dimensional) compressible viscous flow in a closed chamber. The two methods of solution are described. The more promising method failed (a mixed Galerkin finite difference method) whereas a more common finite difference method was successful. Preliminary results are presented showing that multi-dimensional flows need to be treated. A model of the liquid phase of a high temperature heat pipe was developed. The model is intended to be coupled to a vapor phase model for the complete solution of the heat pipe problem. The mathematical equations are formulated consistent with physical processes while allowing a computationally efficient solution. The model simulates time dependent characteristics of concern to the liquid phase including input phase change, output heat fluxes, liquid temperatures, container temperatures, liquid velocities, and liquid pressure. Preliminary results were obtained for two heat pipe startup cases. The heat pipe studied used lithium as the working fluid and an annular wick configuration. Recommendations for implementation based on the results obtained are presented. Experimental studies were initiated using a rectangular heat pipe. Both twin beam laser holography and laser Doppler anemometry were investigated. Preliminary experiments were completed and results are reported.

  17. Optimum Design of Composite Corrugated Web Beams Using Hunting Search Algorithm

    Directory of Open Access Journals (Sweden)

    Ferhat Erdal

    2017-07-01

    Full Text Available Over the past few years there has been sustainable development in the steel and composite construction technology. One of the recent additions to such developments is the I-girders with corrugated web beams. The use of these new generation beams results in a range of benefits, including flexible, free internal spaces and reduced foundation costs. Corrugated web beams are built-up girders with a thin-walled, corrugated web and wide plate flanges. The thin corrugated web affords a significant weight reduction of these beams, compared with hot-rolled or welded ones. In this paper, optimum design of corrugated composite beams is presented. A recent stochastic optimization algorithm coded that is based on hunting search is used for obtaining the solution of the design problem. In the optimisation process, besides the thickness of concrete slab and studs, web height and thickness, distance between the peaks of the two curves, the width and thickness of flange are considered as design variables. The design constraints are respectively implemented from BS EN1993-1:2005 (Annex-D, Eurocode 3 BS-8110 and DIN 18-800 Teil-1. Furthermore, these selections are also carried out such that the design limitations are satisfied and the weight of the composite corrugated web beam is the minimum.

  18. Surveying drainage culvert use by carnivores: sampling design and cost-benefit analyzes of track-pads vs. video-surveillance methods.

    Science.gov (United States)

    Mateus, Ana Rita A; Grilo, Clara; Santos-Reis, Margarida

    2011-10-01

    Environmental assessment studies often evaluate the effectiveness of drainage culverts as habitat linkages for species, however, the efficiency of the sampling designs and the survey methods are not known. Our main goal was to estimate the most cost-effective monitoring method for sampling carnivore culvert using track-pads and video-surveillance. We estimated the most efficient (lower costs and high detection success) interval between visits (days) when using track-pads and also determined the advantages of using each method. In 2006, we selected two highways in southern Portugal and sampled 15 culverts over two 10-day sampling periods (spring and summer). Using the track-pad method, 90% of the animal tracks were detected using a 2-day interval between visits. We recorded a higher number of crossings for most species using video-surveillance (n = 129) when compared with the track-pad technique (n = 102); however, the detection ability using the video-surveillance method varied with type of structure and species. More crossings were detected in circular culverts (1 m and 1.5 m diameter) than in box culverts (2 m to 4 m width), likely because video cameras had a reduced vision coverage area. On the other hand, carnivore species with small feet such as the common genet Genetta genetta were detected less often using the track-pad surveying method. The cost-benefit analyzes shows that the track-pad technique is the most appropriate technique, but video-surveillance allows year-round surveys as well as the behavior response analyzes of species using crossing structures.

  19. Heat Pipe Integrated Microsystems

    Energy Technology Data Exchange (ETDEWEB)

    Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

    1999-03-30

    The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached

  20. Stiffness Analysis of Corrugated Flexure Beam Used in Compliant Mechanisms

    Institute of Scientific and Technical Information of China (English)

    WANG Nianfeng; LIANG Xiaohe; ZHANG Xianmin

    2015-01-01

    Conventional flexible joints generally have limited range of motion and high stress concentration. To overcome these shortcomings, corrugated flexure beam(CF beam) is designed because of its large flexibility obtained from longer overall length on the same span. The successful design of compliant mechanisms using CF beam requires manipulation of the stiffnesses as the design variables. Empirical equations of the CF beam stiffness components, except of the torsional stiffness, are obtained by curve-fitting method. The application ranges of all the parameters in each empirical equation are also discussed. The ratio of off-axis to axial stiffness is considered as a key characteristic of an effective compliant joint. And parameter study shows that the radius of semi-circular segment and the length of straight segment contribute most to the ratio. At last, CF beam is used to design translational and rotational flexible joints, which also verifies the validity of the empirical equations. CF beam with large flexibility is presented, and empirical equations of its stiffness are proposed to facilitate the design of flexible joint with large range of motion.

  1. Mechanical behavior and numerical analysis of corrugated wire mesh laminates

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jeong Ho; Shankar, Krishna; Tahtali, Murat [UNSW, ADFA, Canberra (Australia)

    2012-01-15

    The objective is to show a possibility of corrugated wire mesh laminate (CWML) structure for bone application. CWML is a part of open-cell structures with low density and high strength built with bonded mesh layers. Specimens of CWML made of 316 stainless steel woven meshes with 0.22 mm wire diameter and 0.95 mm mesh aperture, bonded by transit liquid phase (TLP) at low temperatures, were fabricated and tested under quasi-static conditions to determine their compressive behavior with varying numbers of layers of the sample. The finite element software was used to model the CWML and studied their response to mechanical loading. Then, the numerical model was confirmed by the tested sample. Consequently, CWML specimens were reasonably matched with the human tibia bone ranged over apparent density from 0.05 to 0.08 g/cm{sup 3} in Young's modulus and from 0.05 to 0.11 g/cm{sup 3} in compressive yield strength. The CWML model can have the potential for bone application.

  2. Driving corrugated donut rotors with Laguerre-Gauss beams.

    Science.gov (United States)

    Loke, Vincent L Y; Asavei, Theodor; Stilgoe, Alexander B; Nieminen, Timo A; Rubinsztein-Dunlop, Halina

    2014-08-11

    Tightly-focused laser beams that carry angular momentum have been used to trap and rotate microrotors. In particular, a Laguerre-Gauss mode laser beam can be used to transfer its orbital angular momentum to drive microrotors. We increase the torque efficiency by a factor of about 2 by designing the rotor such that its geometry is compatible with the driving beam, when driving the rotation with the optimum beam, rather than beams of higher or lower orbital angular momentum. Based on Floquet's theorem, the order of discrete rotational symmetry of the rotor can be made to couple with the azimuthal mode of the Laguerre-Gauss beam. We design corrugated donut rotors, that have a flat disc-like profile, with the help of the discrete dipole approximation and the T-matrix methods in parallel with experimental demonstrations of stable trapping and torque measurement. We produce and test such a rotor using two-photon photopolymerization. With a rotor that has 8-fold discrete rotational symmetry, an outer radius of 1.85 μm and a hollow core radius of 0.5 μm, we were able to transfer approximately 0.3 h̄ per photon of the orbital angular momentum from an LG04 beam.

  3. Superradiance of short electron pulses in regular and corrugated waveguides

    Energy Technology Data Exchange (ETDEWEB)

    Ginzburg, N.S.; Konoplev, I.V.; Sergeev, A.S. [Institute of Applied Physics, Nizhny Novgorod (Russian Federation)] [and others

    1995-12-31

    The report is devoted to theoretical and experimental study of superradiance of short electron pulses moving through waveguide systems. It is suggested that electrons oscillate or in undulator field (undulator SR) or in homogeneous magnetic field (cyclotron SR). We studied specific regimes of SR which may occur due to peculiarities of waveguide dispersion. Among them there are regimes of radiation near cut-off frequency as well as regimes of group synchronism. At the last operating regimes an electron bunch longitudinal velocity coincide with group velocity of e.m. wave. It is found the increasing of the SR instability grows rate and energy extraction efficiency in such regimes. It is also possible to observe the same enhancement using external feedback in periodically corrugated waveguide when Bragg resonance condition with forward propagated e.m. wave is fulfill. For experimental observation of cyclotron SR we intend to use compact subnanosecond accelerator RADAN 303B on the base of the high voltage generator with special subnansecond transformer. Accelerator generates short 0.3ns electron pulses with current about 1kA and particles energy 200keV. Design of magnetic confound system provide possibility to install an active locker to impose to electrons cyclotron rotation with pitch-factor about 1-1.5. According to numerical simulation at the mm and submm wavebands it is possible to achieve radiation pick power about 5-10MW with pulse duration less than 1ns.

  4. Influence of the Repetitive Corrugation on the Mechanism Occuring During Plastic Deformation of CuSn6 Alloy

    OpenAIRE

    Nuckowski P. M.; Kwaśny W.; Rdzawski Z.; Głuchowski W.; Pawlyta M.

    2016-01-01

    This paper presents the research results of CuSn6 alloy strip at semi-hard state, plastically deformed in the process of repetitive corrugation. The influence of process parameters on the mechanical properties and structure of examined alloy were investigated. Examination in high-resolution transmission electron microscopy (HRTEM) confirmed the impact of the repetitive corrugation to obtain the nano-scale structures. It has been found, that the application of repetitive corrugation increases ...

  5. Calculation of the effective stiffnesses of corrugated plates by solving the problem on the plate cross-section

    Science.gov (United States)

    Kolpakov, A. G.; Rakin, S. I.

    2016-07-01

    It is shown that for corrugated, in particular, multilayer plates, the tree-dimensional cell problem of averaging can be reduced to the two-dimensional problem on the cross section of the periodicity cell of the plate. This significantly increases the accuracy of numerical calculation of the effective stiffnesses of corrugated plates. Numerical calculations of the stiffnesses of a plate with a sinusoidal corrugation are performed, and the results are compared with available data.

  6. Comparison analysis between CSR-OT and CSR-H for corrugated bulkhead of large product tankers

    Institute of Scientific and Technical Information of China (English)

    蔡诗剑; 邱伟强; 刘奕谦

    2014-01-01

    Large Aframax product tanker (more than 100k DWT), with centerline longitudinal corrugated bulkheads and transverse corrugated bulkheads in cargo area, is the largest type of product tanker at present. The external draft of Harmonized Common Structural Rules (CSR-H) for Bulk Carriers and Oil Tankers is released for external review. More attentions are paid to the impact of CSR-H on the structural design of the corrugated bulkhead of large Aframax product tankers. Based on CSR-OT and CSR-H, it discusses the impact of CSR-H on the corrugated bulkhead by strength assessment of a 115k DWT product tanker.

  7. Heat pipes and use of heat pipes in furnace exhaust

    Science.gov (United States)

    Polcyn, Adam D.

    2010-12-28

    An array of a plurality of heat pipe are mounted in spaced relationship to one another with the hot end of the heat pipes in a heated environment, e.g. the exhaust flue of a furnace, and the cold end outside the furnace. Heat conversion equipment is connected to the cold end of the heat pipes.

  8. Composite drill pipe

    Science.gov (United States)

    Leslie, James C [Fountain Valley, CA; Leslie, II, James C.; Heard, James [Huntington Beach, CA; Truong, Liem , Josephson; Marvin, Neubert [Huntington Beach, CA; Hans, [Anaheim, CA

    2008-12-02

    A composite pipe segment is formed to include tapered in wall thickness ends that are each defined by opposed frustoconical surfaces conformed for self centering receipt and intimate bonding contact within an annular space between corresponding surfaces of a coaxially nested set of metal end pieces. The distal peripheries of the nested end pieces are then welded to each other and the sandwiched and bonded portions are radially pinned. The composite segment may include imbedded conductive leads and the axial end portions of the end pieces are shaped to form a threaded joint with the next pipe assembly that includes a contact ring in one pipe assembly pierced by a pointed contact in the other to connect the corresponding leads across the joint.

  9. Heat-pipe Earth.

    Science.gov (United States)

    Moore, William B; Webb, A Alexander G

    2013-09-26

    The heat transport and lithospheric dynamics of early Earth are currently explained by plate tectonic and vertical tectonic models, but these do not offer a global synthesis consistent with the geologic record. Here we use numerical simulations and comparison with the geologic record to explore a heat-pipe model in which volcanism dominates surface heat transport. These simulations indicate that a cold and thick lithosphere developed as a result of frequent volcanic eruptions that advected surface materials downwards. Declining heat sources over time led to an abrupt transition to plate tectonics. Consistent with model predictions, the geologic record shows rapid volcanic resurfacing, contractional deformation, a low geothermal gradient across the bulk of the lithosphere and a rapid decrease in heat-pipe volcanism after initiation of plate tectonics. The heat-pipe Earth model therefore offers a coherent geodynamic framework in which to explore the evolution of our planet before the onset of plate tectonics.

  10. Ditches and Drainage Structures, Culverts - cross drains were collected using a GPS for drainage basin project. Ditches are planned for the future., Published in 2005, 1:2400 (1in=200ft) scale, Effingham County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Ditches and Drainage Structures dataset current as of 2005. Culverts - cross drains were collected using a GPS for drainage basin project. Ditches are planned for...

  11. Road Bridges and Culverts, Misc. Arcs (Bridge): Part of 2005 Planimetry-Topography layers., Published in 2005, 1:1200 (1in=100ft) scale, Washington County GIS Office.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Orthoimagery information as of 2005. It is described...

  12. Pipe Drafting with CAD. Teacher Edition.

    Science.gov (United States)

    Smithson, Buddy

    This teacher's guide contains nine units of instruction for a course on computer-assisted pipe drafting. The course covers the following topics: introduction to pipe drafting with CAD (computer-assisted design); flow diagrams; pipe and pipe components; valves; piping plans and elevations; isometrics; equipment fabrication drawings; piping design…

  13. PE 100 pipe systems

    CERN Document Server

    Brömstrup, Heiner

    2012-01-01

    English translation of the 3rd edition ""Rohrsysteme aus PE 100"". Because of the considerably increased performance, pipe and pipe systems made from 100 enlarge the range of applications in the sectors of gas and water supply, sewage disposal, industrial pipeline construction and in the reconstruction and redevelopment of defective pipelines (relining). This book applies in particular to engineers, technicians and foremen working in the fields of supply, disposal and industry. Subject matters of the book are all practice-relevant questions regarding the construction, operation and maintenance

  14. Optomechanic interaction in a corrugated phoxonic nanobeam cavity

    Science.gov (United States)

    Oudich, Mourad; El-Jallal, Said; Pennec, Yan; Djafari-Rouhani, Bahram; Gomis-Bresco, Jordi; Navarro-Urrios, Daniel; Sotomayor Torres, Clivia M.; Martínez, Alejandro; Makhoute, Abdelkader

    2014-06-01

    The interaction between phonons and photons is investigated theoretically in a phoxonic cavity inside a corrugated nanobeam waveguide presenting band gaps for both electromagnetic and elastic waves. The structure is made by drilling periodic holes on a silicon nanobeam with lateral periodic stubs and the tapered cavity is constructed by changing gradually the geometrical parameters of both the holes and stubs. We show that this kind of cavity displays localized phonons and photons inside the gaps, which can enhance their interaction and also promotes the presence of many optical confined modes with high quality factor. Using the finite-element method, we demonstrate that with appropriate design of the tapering construction, one can control the cavity modes frequency without altering significantly the quality factor of the photonic modes. By changing the tapering rates over the lattice constants, we establish the possibility of shifting the phononic cavity modes frequency to place them inside the desired gap, which enhances their confinement and increases the mechanical quality factor while keeping the strength of the optomechanic coupling high. In our calculations, we take account of both mechanisms that contribute to the acousto-optic interaction, namely photoelastic and interface motion effects. We show that in our case, these two effects can contribute additively to give high coupling strength between phononic and photonic cavity modes. The calculations of the coupling coefficient which gives the phonon-photon coupling strength give values as high as 2 MHz while photonic cavity modes display quality factor of 105 and even values up to 3.4 MHz but with smaller photonic quality factors.

  15. Linear analysis of a backward wave oscillator with triangular corrugated slow wave structure

    Science.gov (United States)

    Saber, Md. Ghulam; Sagor, Rakibul Hasan; Amin, Md. Ruhul

    2016-05-01

    In this work, a backward wave oscillator (BWO) with triangularly corrugated periodic metallic slow wave structure (TrCSWS) driven by an infinitely thin annular electron beam is studied using linear theory. The electron beam is assumed to be guided by a strong magnetic field. The triangular axial profile of the SWS is approximated by a Fourier series in order to apply the linear Rayleigh-Fourier (R-F) theory that has long been used in the theoretical analysis of BWOs with sinusoidally corrugated SWS (SCSWS). The dispersion equation for various beam parameters has been solved and the temporal growth rate (TGR) of the electromagnetic wave for the fundamental TM_{01} mode is calculated numerically. The TGR values for different beam parameters have been compared with those of the BWO with SCSWS, semi-circularly corrugated SWS (SCCSWS) and trapezoidally corrugated SWS (TCSWS). In order to compare the TGR values, the amplitude of corrugation of the TrCSWS is varied so that its dispersion curve of TM_{01} mode almost coincides with that of the SCSWS and TCSWS. The study reveals that the performance (in terms of TGR) of the proposed BWO with TrCSWS is comparable to that of other BWOs with SCSWS and TCSWS for the same set of beam parameters and it provides significantly better performance than SCCSWS. So, the proposed TrCSWS that can easily be constructed may replace SCSWS, SCCSWS or TCSWS as their viable alternative.

  16. Hollow fiber membranes with different external corrugated surfaces for desalination by membrane distillation

    Science.gov (United States)

    García-Fernández, Loreto; García-Payo, Carmen; Khayet, Mohamed

    2017-09-01

    Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) hollow fiber membranes were prepared using the phase inversion spinning technique under a wet gap mode. Different corrugated outer surfaces were obtained by means of a micro-engineered spinneret, spraying the external coagulant on the nascent fiber along gap, and different spinning parameters, namely, the gap distance and the external coagulant flow rate. A quantitative evaluation of the corrugation size and shape was carried out by electron scanning microscopy and atomic force microscopy. The effect of the corrugation size and shape on the direct contact membrane distillation (DCMD) performance has been studied. The corrugated outer surface acted as micro-turbulence promoters mitigating the temperature polarization effect and enhanced the external effective surface area for condensation. Both factors improved the DCMD permeability of the hollow fiber membranes. However, corrugations with V-shaped valleys depths greater than about 30 μm did not always improve the DCMD permeate flux. It was found that the membrane prepared with the spray wetting mode exhibited the best desalination performance. The salt rejection factor of all prepared hollow fiber membranes was greater than 99.9% and the highest DCMD permeate flux of this study was greater than those reported so far for the PVDF-HFP hollow fiber membranes.

  17. Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Zaid N.Z.M.

    2016-01-01

    Full Text Available The failure modes occurring in sandwich panels based on the corrugations of aluminium alloy, carbon fibre-reinforced plastic (CFRP and glass fibre-reinforced plastic (GFRP are analysed in this work. The fracture behaviour of these sandwich panels under compressive stresses is determined through a series of uniform lateral compression performed on samples with different cell wall thicknesses. Compression test on the corrugated-core sandwich panels were conducted using an Instron series 4505 testing machine. The post-failure examinations of the corrugated-core in different cell wall thickness were conducted using optical microscope. Load-displacement graphs of aluminium alloy, GFRP and CFRP specimens were plotted to show progressive damage development with five unit cells. Four modes of failure were described in the results: buckling, hinges, delamination and debonding. Each of these failure modes may dominate under different cell wall thickness or loading condition, and they may act in combination. The results indicate that thicker composites corrugated-core panels tend can recover more stress and retain more stiffness. This analysis provides a valuable insight into the mechanical behaviour of corrugated-core sandwich panels for use in lightweight engineering applications.

  18. Effect of High-Frequency Vertical Vibration of Track on Formation and Evolution of Corrugations

    Institute of Scientific and Technical Information of China (English)

    金学松; 温泽峰; 王开云; 张卫华

    2004-01-01

    The effect of high-frequency curved track vibrations in the vertical direction on the formation and development of rail corrugation was analyzed.Kalker's non-Hertzian rolling contact theory was modified and used to calculate the frictional work density on the contact area of the wheel and rail in rolling when a wheelset is steadily curving.The material loss unit area was assumed to be proportional to the frictional work density to determine the wear depth of the contact surface of the rail.The combined influences of the corrugation and the coupled dynamics of the railway vehicle and track were taken into consideration in the numerical simulation.For simplicity, the model considered one fourth of freight car without lateral motion, namely, a wheelset and the equivalent one fourth freight car body above it.The Euler beam was used to model the rails with the track structure under the rails replaced with equivalent springs, dumpers, and mass bodies.The numerical results show that the high-frequency track vibration causes formation of the initial corrugation on the smooth contact surface of the rail when a wheelset is steadily curving.The corrugation wave length depends on the frequencies and the rolling speed of the wheelset.The vibration frequencies also affect the depth and increase the corrugation.

  19. Theoretical Simulation and Experimental Investigation of a Rail Damper to Minimize Short-Pitch Rail Corrugation

    Directory of Open Access Journals (Sweden)

    Caiyou Zhao

    2017-01-01

    Full Text Available The Cologne-egg fastening systems applied in metro lines, which can be subjected to rail corrugation, are considered in this paper. To understand the mechanism of the formation and development of rail corrugation, dynamic models of the wheel and the track with Cologne-egg fastening system in the frequency domain are developed to analyse the wheel and track vibration behaviour. A field test is also analysed to verify the validity of the mechanism. Using these experimental and theoretical results, the vibration mode of the rail that is responsible for rail corrugation is determined. Based on the results, a novel rail damper that can suppress the track pinned-pinned resonance and smooth the track receptance is presented to minimize short-pitch rail corrugation. It is ultimately found from theoretical simulation and experimental investigation that the application of the rail damper is a long-term and effective method of controlling short-pitch rail corrugation in metro lines.

  20. Experimental investigation of heat transfer and friction factor in a corrugated plate heat exchanger

    Directory of Open Access Journals (Sweden)

    Shive Dayal Pandey, V.K. Nema

    2011-03-01

    Full Text Available Experiments are conducted to determine the heat transfer characteristics for fully developed flow of air and water flowing in alternate corrugated ducts with an inter-wall spacing equal to the corrugation height. The friction factor is found for air channel. The test section was formed by three identical corrugated channels having corrugation angle of 30 degree with cold air flowing in the middle one and hot water equally divided in the adjacent channels. Sinusoidal wavy arcs connected with tangential flat portions make the said corrugation angle with transverse direction. The Reynolds number based on hydraulic diameter varied from 750 to 3200 for water and from 16900 to 68000 for air by changing the mass flow rates of the two fluids. The Prandtl numbers were approximately constant at 2.55 for water and 0.7 for air. The various correlations are obtained Num=0.247Re^0.83 for water, Num=66.686Re^0.18 and friction factor f = 0.644 / Re^0.18 for air.

  1. Models for New Corrugated and Porous Solar Air Collectors under Transient Operation

    Science.gov (United States)

    Adnan Abed, Qahtan; Badescu, Viorel; Ciocanea, Adrian; Soriga, Iuliana; Bureţea, Dorin

    2017-01-01

    Mathematical models have been developed to evaluate the dynamic behavior of two solar air collectors: the first one is equipped with a V-porous absorber and the second one with a U-corrugated absorber. The collectors have the same geometry, cross-section surface area and are built from the same materials, the only difference between them being the absorbers. V-corrugated absorbers have been treated in literature but the V-porous absorbers modeled here have not been very often considered. The models are based on first-order differential equations which describe the heat exchange between the main components of the two types of solar air heaters. Both collectors were exposed to the sun in the same meteorological conditions, at identical tilt angle and they operated at the same air mass flow rate. The tests were carried out in the climatic conditions of Bucharest (Romania, South Eastern Europe). There is good agreement between the theoretical results and experiments. The average bias error was about 7.75 % and 10.55 % for the solar air collector with "V"-porous absorber and with "U"-corrugated absorber, respectively. The collector based on V-porous absorber has higher efficiency than the collector with U-corrugated absorber around the noon of clear days. Around sunrise and sunset, the collector with U-corrugated absorber is more effective.

  2. 46 CFR 154.503 - Piping and piping system components: Protection from movement.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping and piping system components: Protection from..., Construction and Equipment Cargo and Process Piping Systems § 154.503 Piping and piping system components... cause stresses that exceed the design stresses, the piping and piping system components and cargo...

  3. Explosive Welding of Pipes

    Science.gov (United States)

    Drennov, Oleg; Drennov, Andrey; Burtseva, Olga

    2013-06-01

    For connection by welding it is suggested to use the explosive welding method. This method is rather new. Nevertheless, it has become commonly used among the technological developments. This method can be advantageous (saving material and physical resources) comparing to its statical analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. Explosive welding of cylindrical surfaces is performed by launching of welded layer along longitudinal axis of construction. During this procedure, it is required to provide reliable resistance against radial convergent strains. The traditional method is application of fillers of pipe cavity, which are dense cylindrical objects having special designs. However, when connecting pipes consecutively in pipelines by explosive welding, removal of the fillers becomes difficult and sometimes impossible. The suggestion is to use water as filler. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gasdynamic and elastic-plastic calculations we determined non-deformed mass of water (perturbations, which are moving in the axial direction with sound velocity, should not reach the layer end boundaries for 5-7 circulations of shock waves in the radial direction). Linear dimension of the water layer from the zone of pipe coupling along axis in each direction is >= 2R, where R is the internal radius of pipe.

  4. Aeronautical tubes and pipes

    Science.gov (United States)

    Beauclair, N.

    1984-12-01

    The main and subcomponent French suppliers of aircraft tubes and pipes are discussed, and the state of the industry is analyzed. Quality control is essential for tubes with regard to their i.d. and metallurgical compositions. French regulations do not allow welded seam tubes in hydraulic circuits unless no other form is available, and then rustproofed steel must be installed. The actual low level of orders for any run of tubes dictates that the product is only one of several among the manufacturers' line. Automation, both in NDT and quality control, assures that the tubes meet specifications. A total of 10 French companies participate in the industry, serving both civil and military needs, with some companies specializing only in titanium, steel, or aluminum materials. Concerns wishing to enter the market must upgrade their equipment to meet the higher aeronautical specifications and be prepared to furnish tubes and pipes that serve both functional and structural purposes simultaneously. Additionally, pipe-bending machines must also perform to tight specifications. Pipes can range from 0.2 mm exterior diameter to 40 mm, with wall thicknesses from 0.02 mm to 3 mm. A chart containing a list of manufacturers and their respective specifications and characteristics is presented, and a downtrend in production with reduction of personnel is noted.

  5. Heat-pipe planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2017-09-01

    Observations of the surfaces of all terrestrial bodies other than Earth reveal remarkable but unexplained similarities: endogenic resurfacing is dominated by plains-forming volcanism with few identifiable centers, magma compositions are highly magnesian (mafic to ultra-mafic), tectonic structures are dominantly contractional, and ancient topographic and gravity anomalies are preserved to the present. Here we show that cooling via volcanic heat pipes may explain these observations and provide a universal model of the way terrestrial bodies transition from a magma-ocean state into subsequent single-plate, stagnant-lid convection or plate tectonic phases. In the heat-pipe cooling mode, magma moves from a high melt-fraction asthenosphere through the lithosphere to erupt and cool at the surface via narrow channels. Despite high surface heat flow, the rapid volcanic resurfacing produces a thick, cold, and strong lithosphere which undergoes contractional strain forced by downward advection of the surface toward smaller radii. We hypothesize that heat-pipe cooling is the last significant endogenic resurfacing process experienced by most terrestrial bodies in the solar system, because subsequent stagnant-lid convection produces only weak tectonic deformation. Terrestrial exoplanets appreciably larger than Earth may remain in heat-pipe mode for much of the lifespan of a Sun-like star.

  6. [Piping cinnamon] 791

    OpenAIRE

    W L H Skeen and Co

    2003-01-01

    279 x 211 mm. Showing female workers making cinnamon pipes. The cinnamon is placed on a low tripod formed from four sticks, and steadied with the operator's foot while the cuticle is scraped off with a small curved knife. Annotated '791' on the bottom right hand corner of the photograph. Date approximate.

  7. Oblique chain resonance of internal waves by three-dimensional seabed corrugations

    CERN Document Server

    Couston, L -A; Alam, M -R

    2016-01-01

    Here we show that the interaction of a low-mode internal wave with small oblique seabed corrugations can lead to a chain resonance of many other freely propagating internal waves with a broad range of wavenumbers and directions of propagation. The chain resonance results in a complex internal wave dynamics over the corrugated seabed that can lead to a significant redistribution of energy across the internal wave spectrum. In order to obtain a quantitative understanding of the energy transfer rates between the incident and resonated waves over the seabed topography, here we derive an equation for the evolution of the wave envelopes using multiple-scale analysis in the limit of small-amplitude corrugations. Strong energy transfers from the incident internal wave toward shorter internal waves are demonstrated for a broad range of incidence angles, and the theoretical predictions are compared favorably with direct simulations of the full Euler's equation. The key results show that: (i) a large number of distinct ...

  8. Electronic and geometric corrugation of periodically rippled, self-nanostructured graphene epitaxially grown on Ru(0001)

    Energy Technology Data Exchange (ETDEWEB)

    Borca, Bogdana; Barja, Sara; Garnica, Manuela; Rodriguez-GarcIa, Josefa M; Hinarejos, Juan Jose; FarIas, Daniel; Parga, Amadeo L Vazquez de; Miranda, Rodolfo [Departamento de Fisica de la Materia Condensada, Universidad Autonoma de Madrid, Cantoblanco 28049, Madrid (Spain); Minniti, Marina; Politano, Antonio, E-mail: al.vazquezdeparga@uam.e [Instituto Madrileno de Estudios Avanzados en Nanociencia (IMDEA-Nanociencia), Cantoblanco 28049, Madrid (Spain)

    2010-09-15

    Graphene epitaxially grown on Ru(0001) displays a remarkably ordered pattern of hills and valleys in scanning tunneling microscopy (STM) images. The extent to which the observed 'ripples' are structural or electronic in origin has been much disputed recently. A combination of ultrahigh-resolution STM images and helium atom diffraction data shows that (i) the graphene lattice is rotated with respect to the lattice of Ru and (ii) the structural corrugation as determined from He diffraction is substantially smaller (0.15 A) than predicted (1.5 A) or reported from x-ray diffraction or low-energy electron diffraction. The electronic corrugation, on the contrary, is strong enough to invert the contrast between hills and valleys above +2.6 V as new, spatially localized electronic states enter the energy window of the STM. The large electronic corrugation results in a nanostructured periodic landscape of electron and hole pockets.

  9. Measurement with corrugated tubes of early-age autogenous shrinkage of cement-based material

    DEFF Research Database (Denmark)

    Tian, Qian; Jensen, Ole Mejlhede

    2009-01-01

    The use of a special corrugated mould enables transformation of volume strain into horizontal, linear strain measurement in the fluid stage. This allows continuous measurement of the autogenous shrinkage of cement-based materials since casting, and also effectively eliminates unwanted influence...... on the measuring results from gravity, temperature variation and mould restraint. In this paper the principle of the corrugated tube measurement is described. A systematic study was carried out on the influence on the measuring results of the material properties, size effects and encapsulated air in the corrugated...... tube. The experimental results show that there is a minor influence on the measuring results of the stiffness and size of the plastic tube as well as of the encapsulated air. However, the influence decreases with the hardening process and becomes negligible a few hours after final set....

  10. Effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure

    Directory of Open Access Journals (Sweden)

    Zaid N.Z.M.

    2017-01-01

    Full Text Available Sandwich structure is an attractive alternative that increasingly used in the transportation and aerospace industry. Corrugated-core with trapezoidal shape allows enhancing the damage resistance to the sandwich structure, but on the other hand, it changes the structural response of the sandwich structure. The aim of this paper is to study the effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure under compression loading. The corrugated-core specimen was fabricated using press technique, following the shape of trapezoidal shape. Two different materials were used in the study, glass fibre reinforced plastic (GFRP and carbon fibre reinforced plastic (CFRP. The result shows that the mechanical properties of the core in compression loading are sensitive to the variation of a number of unit cells and the core thickness.

  11. Demonstration of nonlinear-energy-spread compensation in relativistic electron bunches with corrugated structures

    CERN Document Server

    Fu, Feichao; Zhu, Pengfei; Zhao, Lingrong; Jiang, Tao; Lu, Chao; Liu, Shengguang; Shi, Libin; Yan, Lixin; Deng, Haixiao; Feng, Chao; Gu, Qiang; Huang, Dazhang; Liu, Bo; Wang, Dong; Wang, Xingtao; Zhang, Meng; Zhao, Zhentang; Stupakov, Gennady; Xiang, Dao; Zhang, Jie

    2015-01-01

    High quality electron beams with flat distributions in both energy and current are critical for many accelerator-based scientific facilities such as free-electron lasers and MeV ultrafast electron diffraction and microscopes. In this Letter we report on using corrugated structures to compensate for the beam nonlinear energy chirp imprinted by the curvature of the radio-frequency field, leading to a significant reduction in beam energy spread. By using a pair of corrugated structures with orthogonal orientations, we show that the quadrupole wake fields which otherwise increase beam emittance can be effectively canceled. This work also extends the applications of corrugated structures to the low beam charge (a few pC) and low beam energy (a few MeV) regime and may have a strong impact in many accelerator-based facilities.

  12. Characteristics of Linerboard and Corrugated Medium Paper Made from Durian Rinds Chemi-mechanical Pulp

    Directory of Open Access Journals (Sweden)

    Masrol Shaiful Rizal

    2016-01-01

    Full Text Available In recent years, there has been tremendous growth of interest in the utilization of non-wood based material to support the insufficient raw materials availability for the pulp and paper industry. Therefore, this study was conducted to investigate the characteristics of 120 gsm linerboard and corrugated medium paper made from unbeaten durian rinds chemi-mechanical (CMP pulp. The linerboard and corrugated medium paper were prepared and tested according to Malaysian Standards / International Organization for Standardization (MS ISO and Technical Association of the Pulp and Paper Industry (TAPPI standard methods. Based on the burst index (2.03 kPa.m2/g, RCT (1.97 N.m2/g and CMT (129N, the linerboard and corrugated medium from CMP durian rind pulp have shown a good potential as an alternative raw material for papermaking and comparable with other types of wood and non-wood based papers as well as current commercial papers.

  13. Flood magnitude and frequency of Black Creek at the culvert on New Jersey Route 94, Vernon Township, Sussex County, New Jersey

    Science.gov (United States)

    Barringer, T.H.

    1996-01-01

    The magnitude and frequency of floods at Black Creek tributary at the culvert on New Jersey Route 94 at milepost 43.0 in Vernon Township, New Jersey, were determined by using the New Jersey Department of Environmental Protection Special Report 38 method. Estimates of flood magnitude and frequency calculated by the Special Report 38 method, as well as drainage-basin characteristics, are included in this report. The 100-year-flood estimate is 261 cubic feet per second.

  14. Flood magnitude and frequency of Franklin Pond tributary at the culvert on New Jersey Route 23, Franklin Borough, Sussex County, New Jersey

    Science.gov (United States)

    Barringer, Thomas

    1996-01-01

    Flood magnitude and frequency values are presented for Franklin Pond tributary at the culvert at milepost 32.2 of New Jersey Route 23, Franklin Borough, New Jersey. The values were determined by using the New Jersey Department of Environmental Protection Special Report 38 method. A description of the drainage-basin characteristics also is included in this report. The 100-year-flood estimate is 218 cubic feet per second.

  15. Flood magnitude and frequency of Little Timber Creek at the culvert on Interstate Route 295, Haddon Heights Township, Camden County, New Jersey

    Science.gov (United States)

    Barringer, T.H.

    1996-01-01

    The magnitude and frequency of floods at the Little Timber Creek at the culvert on Interstate 295, at milepost 28.9, in Haddon Heights Township, New Jersey, were determined by using the New Jersey Department of Environmental Protection Special Report 38 method. Flood-magnitude and -frequency estimates, as well as drainage-basin characteristics, are included in this report. The 100-year-flood estimate is 770 cubic feet per second.

  16. Land Management Agencies: Restoring Fish Passage Through Culverts on Forest Service and BLM Lands in Oregon and Washington Could Take Decades

    Science.gov (United States)

    2001-11-01

    2,645 4,805 $331,042 aAccording to the Forest Service, the Umpqua , Wallow-Whitman, and Colville national forests did not provide estimates because...Action 20 Agency Comments 20 Appendix I Barrier Culvert Information by Bureau of Land Management District Office and National Forest 22 Bureau of Land...of public lands, managed by 9 regional offices that are responsible for supervising the operations of 155 national forests . BLM and the Forest Service

  17. Improved Refractive Index Sensitivity Utilizing Long-Period Gratings with Periodic Corrugations on Cladding

    Directory of Open Access Journals (Sweden)

    Anthony Lim

    2012-01-01

    Full Text Available A new structure of Long-Period Gratings (LPGs sensor is introduced as a sensitive ambient RI sensor. This structure consists of creating periodic corrugations on the cladding of the LPG. The experimental results show that this LPG structure has good performances in terms of linearity and sensitivity and serves as a highly sensitive and cost-effective sensor. It also has the advantage of portability as the corrugation can also serve as the reservoir for the specimen collection to be tested.

  18. Application of impedance boundary conditions to numerical solution of corrugated circular horns

    DEFF Research Database (Denmark)

    Iskander, K; Shafai, L; Frandsen, Aksel

    1982-01-01

    . This formulation is then used to investigate numerically the radiation from corrugated conical horns by approximating the corrugated surface with anisotropic surface impedances. The method is also used to study the scattering properties of receiver horns. In this case the external load is simulated by an impedance......An integral equation method is used to formulate the problem of scattering by rotationally symmetric horn antennas. The excitation is assumed to be due to an infinitesimal dipole antenna, while the secondary field is obtained by assuming anisotropic impedance boundary conditions on the horn surface...

  19. Elastic stability of superplastically formed/diffusion-bonded orthogonally corrugated core sandwich plates

    Science.gov (United States)

    Ko, W. L.

    1980-01-01

    The paper concerns the elastic buckling behavior of a newly developed superplastically formed/diffusion-bonded (SPF/DB) orthogonally corrugated core sandwich plate. Uniaxial buckling loads were calculated for this type of sandwich plate with simply supported edges by using orthotropic sandwich plate theory. The buckling behavior of this sandwich plate was then compared with that of an SPF/DB unidirectionally corrugated core sandwich plate under conditions of equal structural density. It was found that the buckling load for the former was considerably higher than that of the latter.

  20. The Casimir force on a surface with shallow nanoscale corrugations: Geometry and finite conductivity effects

    CERN Document Server

    Bao, Y; Lussange, J; Lambrecht, A; Cirelli, R A; Klemens, F; Mansfield, W M; Pai, C S; Chan, H B

    2010-01-01

    We measure the Casimir force between a gold sphere and a silicon plate with nanoscale, rectangular corrugations with depth comparable to the separation between the surfaces. In the proximity force approximation (PFA), both the top and bottom surfaces of the corrugations contribute to the force, leading to a distance dependence that is distinct from a flat surface. The measured Casimir force is found to deviate from the PFA by up to 15%, in good agreement with calculations based on scattering theory that includes both geometry effects and the optical properties of the material.

  1. Experimental investigation of heat transfer and effectiveness in corrugated plate heat exchangers having different chevron angles

    Science.gov (United States)

    Kılıç, Bayram; İpek, Osman

    2017-02-01

    In this study, heat transfer rate and effectiveness of corrugated plate heat exchangers having different chevron angles were investigated experimentally. Chevron angles of plate heat exchangers are β = 30° and β = 60°. For this purpose, experimentally heating system used plate heat exchanger was designed and constructed. Thermodynamic analysis of corrugated plate heat exchangers having different chevron angles were carried out. The heat transfer rate and effectiveness values are calculated. The experimental results are shown that heat transfer rate and effectiveness values for β = 60° is higher than that of the other. Obtained experimental results were graphically presented.

  2. Elastic constants for superplastically formed/diffusion-bonded corrugated sandwich core

    Science.gov (United States)

    Ko, W. L.

    1980-01-01

    Formulas and associated graphs for evaluating the effective elastic constants for a superplastically formed/diffusion bonded (SPF/DB) corrugated sandwich core, are presented. A comparison of structural stiffnesses of the sandwich core and a honeycomb core under conditions of equal sandwich core density was made. The stiffness in the thickness direction of the optimum SPF/DB corrugated core (that is, triangular truss core) is lower than that of the honeycomb core, and that the former has higher transverse shear stiffness than the latter.

  3. Comparison of heat transfer in straight and corrugated minichannels with two-phase flow

    Directory of Open Access Journals (Sweden)

    Peukert P.

    2014-03-01

    Full Text Available Measurements of heat transfer rates performed with an experimental condensation heat exchanger are reported for a corrugated minichannel tube and for a straight minichannel tube. The two cases were compared at same flow regimes. The corrugation appears advantageous for relatively low steam pressures and flow rates where much higher heat transfer rates were observed close to the steam entrance, thus allowing shortening the heat exchanger with the associated advantages of costs lowering and smaller built-up space. At high steam pressures and high flow rates both tubes performed similarly.

  4. Effect of Corrugation and Reinforcement on the Dispersion of SH-wave Propagation in Corrugated Poroelastic Layer Lying over a Fibre-reinforced Half-space

    Science.gov (United States)

    Singh, Abhishek Kumar; Das, Amrita; Lakshman, Anirban; Chattopadhyay, Amares

    2016-10-01

    The presence of porosity and reinforcement in a medium is an important factor affecting seismic wave propagation and plays vital role in many geophysical prospects. Also, the presence of salt and ore deposits, mountains, basins, mountain roots, etc. is responsible for the existence of corrugated boundary surfaces of constituent layers. Such facts brought motivation for the present paper which deals with the propagation of SH-wave in a heterogeneous fluid-saturated poroelastic layer with corrugated boundaries lying over an initially stressed fibre-reinforced elastic halfspace. Closed form of dispersion relation has been obtained and is found in well agreement to classical Love wave equation for isotropic case. The effect of corrugation, wave number, undulation, position parameter, horizontal compressive/tensile initial stress and heterogeneity on phase velocity has been analysed through numerical computation and graphical illustration. Moreover, comparative study exploring the effect of presence and absence of reinforcement in half-space on dispersion curve is the major highlight of the current study.

  5. Effect of Corrugation and Reinforcement on the Dispersion of SH-wave Propagation in Corrugated Poroelastic Layer Lying over a Fibre-reinforced Half-space

    Directory of Open Access Journals (Sweden)

    Singh Abhishek Kumar

    2016-10-01

    Full Text Available The presence of porosity and reinforcement in a medium is an important factor affecting seismic wave propagation and plays vital role in many geophysical prospects. Also, the presence of salt and ore deposits, mountains, basins, mountain roots, etc. is responsible for the existence of corrugated boundary surfaces of constituent layers. Such facts brought motivation for the present paper which deals with the propagation of SH-wave in a heterogeneous fluid-saturated poroelastic layer with corrugated boundaries lying over an initially stressed fibre-reinforced elastic halfspace. Closed form of dispersion relation has been obtained and is found in well agreement to classical Love wave equation for isotropic case. The effect of corrugation, wave number, undulation, position parameter, horizontal compressive/tensile initial stress and heterogeneity on phase velocity has been analysed through numerical computation and graphical illustration. Moreover, comparative study exploring the effect of presence and absence of reinforcement in half-space on dispersion curve is the major highlight of the current study.

  6. LHCb: Beam Pipe portrait

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector: it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  7. LHCb: Beam Pipe

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector:it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  8. Heat Pipe Systems

    Science.gov (United States)

    1988-01-01

    Solar Fundamentals, Inc.'s hot water system employs space-derived heat pipe technology. It is used by a meat packing plant to heat water for cleaning processing machinery. Unit is complete system with water heater, hot water storage, electrical controls and auxiliary components. Other than fans and a circulating pump, there are no moving parts. System's unique design eliminates problems of balancing, leaking, corroding, and freezing.

  9. Pipe inspection using the pipe crawler. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  10. 46 CFR 76.33-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.33-15 Section 76.33-15 Shipping COAST GUARD... System, Details § 76.33-15 Piping. (a) Individual pipes shall be not less than 3/4-inch standard pipe size. (b) All piping, valves, and fittings of ferrous materials shall be protected inside and...

  11. Experimenting with a ``Pipe'' Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-04-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here allows students in a physics of music or introductory physics course to study an example of an "edge tone" device that produces discrete sound frequencies. From their textbooks, students likely know about standing waves produced by pipes or strings, as well as the resonant frequencies for open and closed pipes. To go a bit further, they can also learn how the frequency of the sound wave depends on the orifice-to-edge distance of the wind instrument.

  12. Stress State of Longitudinally Corrugated Hollow Cylinders with Different Cross-Sectional Curvature

    Science.gov (United States)

    Grigorenko, Ya. M.; Rozhok, L. S.

    2016-11-01

    The effect of the change in the curvature due to changes in the epicycle radius on the stress state of longitudinally corrugated hollow cylinders is studied using a spatial problem statement, the variable separation method, discrete Fourier series, and the discrete-orthogonalization method. The results presented in the form of graphs of distribution of displacements and stresses are analyzed

  13. Multiple Scattering Casimir Force Calculations: Layered and Corrugated Materials, Wedges, and Casimir-Polder Forces

    CERN Document Server

    Milton, Kimball A; Wagner, Jef; Cavero-Pelaez, Ines

    2009-01-01

    Various applications of the multiple scattering technique to calculating Casimir energy are described. These include the interaction between dilute bodies of various sizes and shapes, temperature dependence, interactions with multilayered and corrugated bodies, and new examples of exactly solvable separable bodies.

  14. Dynamic response of clamped corrugated sandwich plates subjected to underwater impulsive loads

    Science.gov (United States)

    Huang, Wei; Zhang, Wei; Ye, Nan; Li, Dacheng

    2017-01-01

    Corrugated sandwich plates are widely used in marine industry because such plates have high strength-to-weight ratios and blast resistance. The laboratory-scaled fluid-structure interaction experiments are performed to demonstrate the shock resistance of corrugated sandwich plates by quantifying the permanent transverse deflection at mid-span of the plates as a function of impulsive loadings per areal mass. Sandwich structures with 6mm-thick 3003 H18 aluminum corrugated core and 5A06 face sheets subjected to underwater impulsive loadings are studied experimentally in this paper. The dynamic deformations of plates are captured with the the 3D digital imaging correlation method (DIC). The results affirm the peak deflection during the processes of dynamic deformation and the residual maximum deflection for post-mortem plates show a linear trend with the impulses per areal mass, and show sensitivity to the change of impulses. Inhomogeneous deformation for corrugated sandwich plates are show uneven rather than the perfect parabolic shapes reported in previous studies. With the increasing of intensities for impulsive loadings, the failure modes can be observed more complicated from the initial plastic deformation to debonding and crack. This paper provides valid data to quantify the peak deflection, residual deflection and failure modes as functions of impulses and geometric parameters in the future work.

  15. Self-standing corrugated Ag and Au-nanorods for plasmonic applications

    DEFF Research Database (Denmark)

    Habouti, S.; Mátéfi-Tempfli, M.; Solterbeck, C.-H.;

    2011-01-01

    We use home-made Si-supported anodized alumina thin film templates for the electrodeposition of large area self-standing Ag- and Au-nanorod (Au-NR) arrays. The deposition conditions chosen, i.e. electrolyte composition and deposition voltage, lead to a corrugated rod morphology, particularly for ...

  16. Results of measurements at a laboratory condensation heat exchanger with a corrugated minichanel tube

    Directory of Open Access Journals (Sweden)

    Jan Hrubý

    2012-04-01

    Full Text Available This article present a short selection of results obtained from measurements done at a laboratory condensation heat-exchanger with a corrugated mini-channel tube. It also touches a little the metering method and design of the heat-exchanger.

  17. "Cold" dispersion relation of corrugated waveguide filled with plasma immersed in a finite magnetic field

    Institute of Scientific and Technical Information of China (English)

    李伟; 魏彦玉; 谢鸿全; 刘盛纲; 巩马理

    2003-01-01

    A general dispersion equation of a partially filled plasma corrugated waveguide immersed in a finite magnetic field is presented. When the guiding magnet Bo →∞ or 0, this equation can be reduced to the results obtained in previous works.

  18. Evaluation of Steel Shear Walls Behavior with Sinusoidal and Trapezoidal Corrugated Plates

    Directory of Open Access Journals (Sweden)

    Emad Hosseinpour

    2015-01-01

    Full Text Available Reinforcement of structures aims to control the input energy of unnatural and natural forces. In the past four decades, steel shear walls are utilized in huge constructions in some seismic countries such as Japan, United States, and Canada to lessen the risk of destructive forces. The steel shear walls are divided into two types: unstiffened and stiffened. In the former, a series of plates (sinusoidal and trapezoidal corrugated with light thickness are used that have the postbuckling field property under overall buckling. In the latter, steel profile belt series are employed as stiffeners with different arrangement: horizontal, vertical, or diagonal in one side or both sides of wall. In the unstiffened walls, increasing the thickness causes an increase in the wall capacity under large forces in tall structures. In the stiffened walls, joining the stiffeners to the wall is costly and time consuming. The ANSYS software was used to analyze the different models of unstiffened one-story steel walls with sinusoidal and trapezoidal corrugated plates under lateral load. The obtained results demonstrated that, in the walls with the same dimensions, the trapezoidal corrugated plates showed higher ductility and ultimate bearing compared to the sinusoidal corrugated plates.

  19. Quantifying wave propagation over a corrugated metal using 5 dBi antennas

    CSIR Research Space (South Africa)

    Nkosi, MC

    2015-09-01

    Full Text Available corrugated metal of a shipping container and also in a free space. The free space measurement is used as a reference point to study the influence of the metal on the wave propagation. The transmission coefficient measured over the shipping container...

  20. Evaluation of Mechanical Strength of Five Layered Corrugated Cardboard Depending on the Types of Waveforms

    Directory of Open Access Journals (Sweden)

    Ivan Budimir

    2013-01-01

    Full Text Available Due to the growing need for material saving in the production of paper packaging, its industrial production is faced with the problem of quality assurance. By controlling the cost of production of corrugated cardboard, paperboard mechanical properties depend directly on the flute profile. Therefore, the corrugated cardboard can be observed both from technological and environmental aspects. Five layered corrugated cardboard of different types of flute profile was used for this research. It is assumed that the characteristic shape of the wave has a positive effect on its mechanical properties. On the other hand, it is supposed if the material saving can be achieved without the characteristic flute profile effects on the reduction of mechanical strength of paperboard. The aim of the research is to determine whether there is a direct impact on the type of waveform on its mechanical strength. Statistical methods were used for the evaluation of expectation values ​​of the estimated strength of corrugated board with respect to the flute profile.

  1. Multileg Heat-Pipe Evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A.

    1986-01-01

    Parallel pipes provide high heat flow from small heat exchanger. Six parallel heat pipes extract heat from overlying heat exchanger, forming evaporator. Vapor channel in pipe contains wick that extends into screen tube in liquid channel. Rods in each channel hold wick and screen tube in place. Evaporator compact rather than extended and more compatible with existing heat-exchanger geometries. Prototype six-pipe evaporator only 0.3 m wide and 0.71 m long. With ammonia as working fluid, transports heat to finned condenser at rate of 1,200 W.

  2. Six Centuries Old Spiral of Vertical Corrugations in Saturn's C-Ring

    Science.gov (United States)

    Marouf, E. A.; French, R. G.; Rappaport, N. J.; Wong, K.; McGhee, C.; Anabtawi, A.

    2011-12-01

    Likely evidence of nearly six centuries old collision of captured cometary material with Saturn's Ring C is uncovered in recent Cassini Radio Science ring observations. Three Cassini ring occultation experiments were especially designed so that radio signals transmitted by Cassini to the Earth pass through the rings when the rings are nearly closed as viewed by the ground receiving stations of the NASA Deep Space Network (DSN). In this special geometry, the long path of the radio signals through the rings enhances sensitivity to detection of very tenuous ring material and allows ~400 meters resolution profiling of its radial structure. The observations uncover previously undetectable quasi-periodic optical depth undulations in 4 sub-regions of the innermost ~4000 km of Ring C (~74,480-77,740 km). The structure modulates a tenuous background optical depth of ~0.05 and has peak-to-peak fluctuations corrugations 4-10 meters in height likely caused by a past ring tilting event (collision with cometary debris) and subsequent differential nodal regression of particle orbits. Time evolution of the perturbations creates a tightly wound spiral pattern of ring height variations which when probed by the radio signals yield the observed tenuous quasi-periodic optical depth fluctuations. The corrugations model was proposed by Hedman et al. [Science 332, 2011] to explain intriguing 30-50 km wavelength structure observed in Cassini images (ISS) across Ring C. The RSS wavelength-radius behavior is in general agreement with the corrugation model prediction; however, important differences persist (ring mass effect?). The much shorter RSS corrugation wavelength compared with ISS implies a separate ring tilting event that is older by ~600 years (late 1300's), and the two tones separation suggests two sub-events ~50 years apart. Together with reported detection of similar corrugations within the tenuous Jovian rings [Showalter et al., Science 332, 2011], the collective observations

  3. 新疆某水电站引水渠排洪涵洞修补加固方案%Culvert Repair Reinforcement Scheme of a Certain Hydropower Station Diversion Channels in Xinjiang

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

      新疆某水电站引水渠的跨洪沟箱涵由于顶板和底板配筋不足,使得正截面受弯承载力和斜截面受剪承载力不够,导致排洪箱涵顶板和底板出现受弯和受剪裂缝。通过对箱涵裂缝进行细致的调查,提出了修补方案,并对箱涵结构内力、配筋及过洪能力等进行了复核计算,使得箱涵结构满足安全运行要求。%A certain hydropower station diversion channels across hong ditch of Xinjiang box culvert caused by a lack of roof and floor reinforcement, makes the flexural bearing capacity of normal section and inclined section shear bearing ca-pacity is not enough, lead to having box culvert top and bottom of the bending and shear cracks. Through the detailed in-vestigation, and cracks in box culvert repair scheme is proposed, and the internal forces of box culvert structure, reinforce-ment calculation and flood capacity and so on has carried on the review, makes the box culvert structure satisfies the re-quirement of safe operation.

  4. Large-bore pipe decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Ebadian, M.A.

    1998-01-01

    The decontamination and decommissioning (D and D) of 1200 buildings within the US Department of Energy-Office of Environmental Management (DOE-EM) Complex will require the disposition of miles of pipe. The disposition of large-bore pipe, in particular, presents difficulties in the area of decontamination and characterization. The pipe is potentially contaminated internally as well as externally. This situation requires a system capable of decontaminating and characterizing both the inside and outside of the pipe. Current decontamination and characterization systems are not designed for application to this geometry, making the direct disposal of piping systems necessary in many cases. The pipe often creates voids in the disposal cell, which requires the pipe to be cut in half or filled with a grout material. These methods are labor intensive and costly to perform on large volumes of pipe. Direct disposal does not take advantage of recycling, which could provide monetary dividends. To facilitate the decontamination and characterization of large-bore piping and thereby reduce the volume of piping required for disposal, a detailed analysis will be conducted to document the pipe remediation problem set; determine potential technologies to solve this remediation problem set; design and laboratory test potential decontamination and characterization technologies; fabricate a prototype system; provide a cost-benefit analysis of the proposed system; and transfer the technology to industry. This report summarizes the activities performed during fiscal year 1997 and describes the planned activities for fiscal year 1998. Accomplishments for FY97 include the development of the applicable and relevant and appropriate regulations, the screening of decontamination and characterization technologies, and the selection and initial design of the decontamination system.

  5. Deployable Pipe-Z

    Science.gov (United States)

    Zawidzki, Machi

    2016-10-01

    This paper presents a concept of deployable Pipe-Z (dPZ): a modular structural system which takes advantage of the robustness of rigid-panel mechanism and allows to create free-form links which are also reconfigurable and deployable. The concept presented can be applied for building habitats and infrastructures for human exploration of oceans and outer space. dPZ structures can adapt to changing requirements e.g. mission objectives, crew condition and technological developments. Furthermore, such lightweight and adaptable structural concept can assist in sustainable exploration development. After brief introduction, the concept of Pipe-Z (PZ) is presented. Next, the reconfigurability of PZ is explained and illustrated with continuous and collision-free transition from a PZ forming a Trefoil knot to a Figure-eight knot. The following sections introduce, explain and illustrate the folding mechanism of a single foldable Pipe-Z module (fPZM) and entire dPZ structure. The latter is illustrated with asynchronous (delayed) unfolding of a relatively complex Unknot. Several applications of PZ are suggested, namely for underwater and deep-space and surface habitats, for permanent, but in particular, temporary or emergency passages. As an example, a scenario of a failure of one of the modules of the International Space Station is presented where a rigid structure of 40 fPZMs bypasses the "dead link". A low-fidelity prototype of a 6-module octagonal dPZ is presented; several folding schemes including concentric toric rings are demonstrated. Practical issues of pressurization and packing are briefly discussed.

  6. HPFRCC - Extruded Pipes

    DEFF Research Database (Denmark)

    Stang, Henrik; Pedersen, Carsten

    1996-01-01

    as well as structural design. Material development was carried out considering both processing requirements as well as mechanical properties of the hardened material. A micro-mechanical model for the non-linear material behavior of the hardened material based on the stress-crack width or the $\\sigma...... itself. The structural modeling of the pipe was done making direct use of the $\\sigma-w$ material characterization. The processing technique developed is a novel type of extrusion combiningease of material mixing and few requirements for material pre-processingwith a high degree of accuracy and stability...

  7. ABSTRACTS WELDEL PIPE AND TUBE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    ABSTRACTS WELDEL PIPE AND TUBE Vol.24 No.3 May.2001 Huang Jingan(1) Strengthen, Intercourse, Coordination and Promote the Development Together Liang Aiyu(11) The Production and the Development of the Water supply pipe for City Construction From the aspects of the quality, appearance, environment protection, economic analysis etc., This article evaluates the galvanized pipe, plastic steel complex pipe, plastic aluminum pipe, stainless pipe for city water supply. In accordance with the requirements of the city construction programming and development, it is considered that the plastic aluminum pipe and plastic steel pipe instead of galvanization pipe is the trend of the development. The author also gives some constructive proposals for reference. Subject Terms:galvanized pipe complex pipe stainless pipe city water supply evaluation Zhao Rongbin,Li Guangjun(14) The TIG welding of Protected Tantalum-pipe for sheathed thermocouples used in corrosive environment The protected Tantalum-pipe welding of sheathed therocouples was investigated by TIG. The welding process and its key parameters were introduced. Welding quality influenced by processing was discussed. Subject Terms:welding protected Tantalum-pipe corrosion He Defu et al(18) Design and Research for An Automatic MIG Welding Machine of Catalyst Converter of Automobile Two different schemes for automatic MIG welding of catalyst converter of automobile have been compared and analysed. A design of automatic MIG welding machine used for catalyst converter of automobile has been suggested in this paper. Subject Terms:environmental protection automobile tri-catalyst converter MIG welding automatic welding PLC Fang Chucai(24) Cold Crack Analysis of Low Alloy High Strength Steel Weld Seam Heat Affected Area During the welding of low alloy high strength (X65 and above), the fine crack occurs in the weld (especially inner weld) and the low plastic hard brickle structure occurs in the Heat Affected Area (HAZ) sometime. This

  8. Heat Pipe Blocks Return Flow

    Science.gov (United States)

    Eninger, J. E.

    1982-01-01

    Metal-foil reed valve in conventional slab-wick heat pipe limits heat flow to one direction only. With sink warmer than source, reed is forced closed and fluid returns to source side through annular transfer wick. When this occurs, wick slab on sink side of valve dries out and heat pipe ceases to conduct heat.

  9. Mechanical Behaviour of Lined Pipe

    NARCIS (Netherlands)

    Hilberink, A.

    2011-01-01

    Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

  10. Temperature drops in heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Saatci, A.M.; Khalifa, A.M.A.; Akyurt, M.

    1986-01-01

    The role of entrainment in limiting heat pipe power handling capacity is discussed. The effect of entrainment on the measured temperature field in the integral heat pipe of a split system solar cooker is analyzed. An experimental set-up depicting a heat loop is presented, along with test results.

  11. Promethus Hot Leg Piping Concept

    Energy Technology Data Exchange (ETDEWEB)

    AM Girbik; PA Dilorenzo

    2006-01-24

    The Naval Reactors Prime Contractor Team (NRPCT) recommended the development of a gas cooled reactor directly coupled to a Brayton energy conversion system as the Space Nuclear Power Plant (SNPP) for NASA's Project Prometheus. The section of piping between the reactor outlet and turbine inlet, designated as the hot leg piping, required unique design features to allow the use of a nickel superalloy rather than a refractory metal as the pressure boundary. The NRPCT evaluated a variety of hot leg piping concepts for performance relative to SNPP system parameters, manufacturability, material considerations, and comparison to past high temperature gas reactor (HTGR) practice. Manufacturability challenges and the impact of pressure drop and turbine entrance temperature reduction on cycle efficiency were discriminators between the piping concepts. This paper summarizes the NRPCT hot leg piping evaluation, presents the concept recommended, and summarizes developmental issues for the recommended concept.

  12. On railway culvert foundation settlement in saline land area%盐渍土地区铁路涵洞基础沉降分析

    Institute of Scientific and Technical Information of China (English)

    徐志彪

    2015-01-01

    According to the actual project, based on the practice of newly-built local railway of Xitieshan-North Huobuxun, key technology study is performed on foundation handling under the conditions of lake sand subsoil in the special geological conditions ( high salt saturated fine sand) of reinforced concrete box culvert. Culverts original ground handling method is gravel pile foundation, design changes due to geological reasons and construction conditions, pieces replacement is adopted. The two culverts foundation reinforcement methods adopted were analyzed based on the settlement deformation data, in-situ test and soil parameters. The numeri-cal simulation computation is made by using finite element software to analyze culvert settlement variation in different load conditions for foundation treatment of saline land area, which can provide important technical in-formation for similar project.%根据实际工程,以新建锡铁山至北霍布逊地方铁路为依托,针对位于该地区特殊地质条件(高含盐饱和细砂土)下钢筋混凝土箱型涵的修建,开展对青海北霍布逊湖区高含盐饱和细砂土地基条件下涵洞地基处理的关键技术研究。涵洞原地基处理方式为碎石桩基础,后因地质原因及施工条件做出设计变更,采取片石换填的地基处理方式。应用实际观测到的涵洞的沉降变形资料和涵身现场的原位测试、查阅相关资料及反演得到的土性参数,对涵洞采取的两种地基加固方式进行对比分析,并利用有限元软件对其进行数值模拟运算,分析涵洞在不同荷载工况下的沉降变化规律,为盐渍土地区工程的地基处理提供了重要的技术资料。

  13. Influence of the Repetitive Corrugation on the Mechanism Occuring During Plastic Deformation of CuSn6 Alloy

    Directory of Open Access Journals (Sweden)

    Nuckowski P.M.

    2016-09-01

    Full Text Available This paper presents the research results of CuSn6 alloy strip at semi-hard state, plastically deformed in the process of repetitive corrugation. The influence of process parameters on the mechanical properties and structure of examined alloy were investigated. Examination in high-resolution transmission electron microscopy (HRTEM confirmed the impact of the repetitive corrugation to obtain the nano-scale structures. It has been found, that the application of repetitive corrugation increases the tensile strength (Rm, yield strength (Rp0.2 and elastic limit (Rp0,05 of CuSn6 alloy strips. In the present work it has been confirmed that the repetitive corrugation process is a more efficient method for structure and mechanical properties modification of commercial CuSn6 alloy strip (semi-hard as compared with the classic rolling process.

  14. Research on the Matching of Fastener Stiffness Based on Wheel-Rail Contact Mechanism for Prevention of Rail Corrugation

    National Research Council Canada - National Science Library

    Caiyou Zhao; Ping Wang; Mengting Xing

    2017-01-01

    .... However, this kind of fasteners could cause severe rail corrugation. Based on the "wheel-rail dynamic flexibility difference" mechanism, the optimization and further research of fastener stiffness were performed...

  15. Corrugated structure insertion for extending the SASE bandwidth up to 3% at the European XFEL

    CERN Document Server

    Zagorodnov, I; Limberg, T

    2016-01-01

    The usage of x-ray free electron laser (XFEL) in femtosecond nanocrystallography involves sequential illumination of many small crystals of arbitrary orientation. Hence a wide radiation bandwidth will be useful in order to obtain and to index a larger number of Bragg peaks used for determination of the crystal orientation. Considering the baseline configuration of the European XFEL in Hamburg, and based on beam dynamics simulations, we demonstrate here that the usage of corrugated structures allows for a considerable increase in radiation bandwidth. Data collection with a 3% bandwidth, a few microjoule radiation pulse energy, a few femtosecond pulse duration, and a photon energy of 5.4 keV is possible. For this study we have developed an analytical modal representation of the short-range wake function of the flat corrugated structures for arbitrary offsets of the source and the witness particles.

  16. Corrugated structure insertion for extending the SASE bandwidth up to 3% at the European XFEL

    Science.gov (United States)

    Zagorodnov, I.; Feng, G.; Limberg, T.

    2016-11-01

    The usage of x-ray free electron laser (XFEL) in femtosecond nanocrystallography involves sequential illumination of many small crystals of arbitrary orientation. Hence a wide radiation bandwidth will be useful in order to obtain and to index a larger number of Bragg peaks used for determination of the crystal orientation. Considering the baseline configuration of the European XFEL in Hamburg, and based on beam dynamics simulations, we demonstrate here that the usage of corrugated structures allows for a considerable increase in radiation bandwidth. Data collection with a 3% bandwidth, a few microjoule radiation pulse energy, a few femtosecond pulse duration, and a photon energy of 5.4 keV is possible. For this study we have developed an analytical modal representation of the short-range wake function of the flat corrugated structures for arbitrary offsets of the source and the witness particles.

  17. Two-phase flow patterns in adiabatic and diabatic corrugated plate gaps

    Science.gov (United States)

    Polzin, A.-E.; Kabelac, S.; de Vries, B.

    2016-09-01

    Correlations for two-phase heat transfer and pressure drop can be improved considerably, when they are adapted to specific flow patterns. As plate heat exchangers find increasing application as evaporators and condensers, there is a need for flow pattern maps for corrugated plate gaps. This contribution presents experimental results on flow pattern investigations for such a plate heat exchanger background, using an adiabatic visualisation setup as well as a diabatic setup. Three characteristic flow patterns were observed in the considered range of two-phase flow: bubbly flow, film flow and slug flow. The occurrence of these flow patterns is a function of mass flux, void fraction, fluid properties and plate geometry. Two different plate geometries having a corrugation angle of 27° and 63°, respectively and two different fluids (water/air and R365mfc liquid/vapor) have been analysed. A flow pattern map using the momentum flux is presented.

  18. Thermal Characteristics of a Primary Surface Heat Exchanger with Corrugated Channels

    Directory of Open Access Journals (Sweden)

    Jang-Won Seo

    2015-12-01

    Full Text Available This paper presents the heat transfer and pressure drop characteristics of a primary surface heat exchanger (PSHE with corrugated surfaces. The PSHE was experimentally investigated for a Reynolds number range of 156–921 under various flow conditions on the hot and cold sides. The inlet temperature of the hot side was maintained at 40 °C, while that of the cold side was maintained at 20 °C. A counterflow was used as it has a higher temperature proximity in comparison with a parallel flow. The heat transfer rate and pressure drop were measured for various Reynolds numbers on both the hot and cold sides of the PSHE, with the heat transfer coefficients for both sides computed using a modified Wilson plot method. Based on the results of the experiment, both Nusselt number and friction factor correlations were suggested for a PSHE with corrugated surfaces.

  19. Analysis of Vibrations Generated by the Presence of Corrugation in a Modeled Tram Track

    Directory of Open Access Journals (Sweden)

    Julia I. Real Herráiz

    2015-01-01

    Full Text Available In recent years, there has been a significant increase in the development of the railway system. Despite the huge benefits of railways, one of the main drawbacks of this mode of transport is vibrations caused by vehicles in service, especially in the case of trams circulating in urban areas. Moreover, this undesirable phenomenon may be exacerbated by the presence of irregularities in the rail-wheel contact. Thus, an analytical model able to reproduce the vibrational behavior of a real stretch of tram track was implemented. Besides, a simulation of different types of corrugation was carried out by calculating in an auxiliary model the dynamic overloads generated by corrugation. These dynamic overloads fed the main model to obtain the vibrations generated and then transmitted to the track.

  20. Parametric study on the performance of a heat exchanger with corrugated louvered fins

    Energy Technology Data Exchange (ETDEWEB)

    Qi, Zhao-gang; Chen, Jiang-ping; Chen, Zhi-jiu [Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, No. 1954, Huashan Rd., Shanghai 200030 (China)

    2007-02-15

    The Taguchi method is a well-known parametric study tool in engineering quality and experimental design. This study analyzes five experimental factors (flow depth, ratio of fin pitch and fin thickness, tube pitch, number of louvers and angle of louver) affecting the heat transfer and pressure drop of a heat exchanger with corrugated louvered fins using the Taguchi method. Fifteen samples are selected from experimental database and the heat transfer and flow friction characteristics are analyzed. The results show that flow depth, ratio of fin pitch and fin thickness and the number of the louvers are the main factors that influence significantly the thermal hydraulic performance of the heat exchanger with corrugated louvered fins. Therefore, these three factors are considered as the main factors for an optimum design of a heat exchanger. (author)

  1. Coupled-Mode Theory for Complex-Index, Corrugated Multilayer Stacks

    DEFF Research Database (Denmark)

    Lüder, Hannes; Gerken, Martina; Adam, Jost

    We present a coupled-mode theory (CMT) approach for modelling the modal behaviour of multi- layer thinfilm devices with complex material parameters and periodic corrugations. Our method provides fast computation and extended physical insight as compared to standard numerical methods......-film devices [1] and for increasing the sensitivity of refractive index sensors [2]. Here, we show a coupled-mode theory approach for modelling such devices. We first calculate the unperturbed waveguide modes (Fig.1), used as basis functions in the coupled-mode formalism. The waveguide corrugation is treated...... as a perturbation and leads to coupling between the modes. Expanding our previous work [3], we introduce perfectly matched layer (PML) boundary conditions, to maintain a discrete, complete set of modes [4], and allow for complex-index materials. These extensions, however, cause the resulting eigenvalue equation...

  2. Vibroacoustic Characterization of Corrugated-Core and Honeycomb-Core Sandwich Panels

    Science.gov (United States)

    Allen, Albert; Schiller, Noah

    2016-01-01

    The vibroacoustic characteristics of two candidate launch vehicle fairing structures, corrugated- core and honeycomb-core sandwich designs, were studied. The study of these structures has been motivated by recent risk reduction efforts focused on mitigating high noise levels within the payload bays of large launch vehicles during launch. The corrugated-core sandwich concept is of particular interest as a dual purpose structure due to its ability to harbor resonant noise control systems without appreciably adding mass or taking up additional volume. Specifically, modal information, wavelength dispersion, and damping were determined from a series of vibrometer measurements and subsequent analysis procedures carried out on two test panels. Numerical and analytical modeling techniques were also used to assess assumed material properties and to further illuminate underlying structural dynamic aspects. Results from the tests and analyses described herein may serve as a reference for additional vibroacoustic studies involving these or similar structures.

  3. A technology to improve formability for aluminum alloy thin-wall corrugated sheet component hydroforming

    Directory of Open Access Journals (Sweden)

    Lang Lihui

    2015-01-01

    Full Text Available The explosively forming projectile (EFP had been traditional adopted for the aluminum thin-walled corrugated sheet, whose deformation range is large but the formability is poor, and this process usually has problems of poor surface quality, long manufacturing cycle and high cost. The active hydroforming process was suggested to solve these issues during EFP. A new technology named as blank bulging by turning the upside down active hydroforming technology was proposed to overcome difficulties in non-uniform thickness distribution and cracking failure of corrugated sheet during the conventional hydroforming process. Both numerical simulations and experiments were conducted for this new technology. The result show that the deformation capacity of aluminum alloys can be improved effectively, and the more uniform distribution of wall thickness was obtained by this new method. It is conducted that the new method is universal for thin-walled, shallow drawing parts with complex section.

  4. SELF-TRAPPING OF DISKOSEISMIC CORRUGATION MODES IN NEUTRON STAR SPACETIMES

    Energy Technology Data Exchange (ETDEWEB)

    Tsang, David [Center for Theory and Computation, Department of Astronomy, University of Maryland, College Park, MD 20742 (United States); Pappas, George [Department of Physics and Astronomy, The University of Mississippi, University, MS 38677 (United States)

    2016-02-10

    We examine the effects of higher-order multipole contributions of rotating neutron star (NS) spacetimes on the propagation of corrugation (c-)modes within a thin accretion disk. We find that the Lense–Thirring precession frequency, which determines the propagation region of the low-frequency fundamental corrugation modes, can experience a turnover allowing for c-modes to become self-trapped for sufficiently high dimensionless spin j and quadrupole rotational deformability α. If such self-trapping c-modes can be detected, e.g., through phase-resolved spectroscopy of the iron line for a high-spin low-mass accreting neutron star, this could potentially constrain the spin-induced NS quadrupole and the NS equation of state.

  5. Lamb wave band gaps in one-dimensional radial phononic crystal plates with periodic double-sided corrugations

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yinggang [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China); School of Transportation, Wuhan University of Technology, Wuhan 430070 (China); Chen, Tianning [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China); Wang, Xiaopeng, E-mail: xpwang@mail.xjtu.edu.cn [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China); Li, Suobin [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China)

    2015-11-01

    In this paper, we present the theoretical investigation of Lamb wave propagation in one-dimensional radial phononic crystal (RPC) plates with periodic double-sided corrugations. The dispersion relations, the power transmission spectra, and the displacement fields of the eigenmodes are studied by using the finite element method based on two-dimensional axial symmetry models in cylindrical coordinates. Numerical results show that the proposed RPC plates with periodic double-sided corrugations can yield several band gaps with a variable bandwidth for Lamb waves. The formation mechanism of band gaps in the double-sided RPC plates is attributed to the coupling between the Lamb modes and the in-phase and out-phases resonant eigenmodes of the double-sided corrugations. We investigate the evolution of band gaps in the double-sided RPC plates with the corrugation heights on both sides arranged from an asymmetrical distribution to a symmetrical distribution gradually. Significantly, with the introduction of symmetric double-sided corrugations, the antisymmetric Lamb mode is suppressed by the in-phase resonant eigenmodes of the double-sided corrugations, resulting in the disappearance of the lowest band gap. Furthermore, the effects of the geometrical parameters on the band gaps are further explored numerically.

  6. Analysis of exergy and parametric study of a v-corrugated solar air heater

    Energy Technology Data Exchange (ETDEWEB)

    Hedayatizadeh, Mahdi [University of Tabriz, Department of Agricultural Machinery Engineering, Faculty of Agriculture, Tabriz (Iran, Islamic Republic of); University of Birjand, Faculty of Agriculture, P.O. Box 97175/331, Birjand (Iran, Islamic Republic of); Ajabshirchi, Yahya [University of Tabriz, Department of Agricultural Machinery Engineering, Faculty of Agriculture, Tabriz (Iran, Islamic Republic of); Sarhaddi, Faramarz; Farahat, Said [University of Sistan and Baluchestan, Department of Mechanical Engineering, Faculty of Engineering, P.O. Box 98164/161, Zahedan (Iran, Islamic Republic of); Safavinejad, Ali [University of Birjand, Department of Mechanical Engineering, Faculty of Engineering, Birjand (Iran, Islamic Republic of); Chaji, Hossein [University of Tabriz, Department of Agricultural Machinery Engineering, Faculty of Agriculture, Tabriz (Iran, Islamic Republic of); Center of Agriculture and Natural Resources of Khorasan Razavi Province, Ministry of Agriculture, Mashhad (Iran, Islamic Republic of)

    2012-07-15

    Solar air heater requires investigation for enhancement of solar energy conversion into heat. Different configurations with various artificial roughness geometries are proposed to date. In present study attention is paid on ways leading to more delivery of exergy by a v-corrugated solar air heater through parametric study. Effects of aspect ratio of the collector, inlet air temperature, mass flow rate per collector area etc. are studied. (orig.)

  7. Psychometric properties of startle and corrugator response in NPU, affective picture viewing, and resting state tasks.

    Science.gov (United States)

    Kaye, Jesse T; Bradford, Daniel E; Curtin, John J

    2016-08-01

    The current study provides a comprehensive evaluation of critical psychometric properties of commonly used psychophysiology laboratory tasks/measures within the NIMH RDoC. Participants (N = 128) completed the no-shock, predictable shock, unpredictable shock (NPU) task, affective picture viewing task, and resting state task at two study visits separated by 1 week. We examined potentiation/modulation scores in NPU (predictable or unpredictable shock vs. no-shock) and affective picture viewing tasks (pleasant or unpleasant vs. neutral pictures) for startle and corrugator responses with two commonly used quantification methods. We quantified startle potentiation/modulation scores with raw and standardized responses. We quantified corrugator potentiation/modulation in the time and frequency domains. We quantified general startle reactivity in the resting state task as the mean raw startle response during the task. For these three tasks, two measures, and two quantification methods, we evaluated effect size robustness and stability, internal consistency (i.e., split-half reliability), and 1-week temporal stability. The psychometric properties of startle potentiation in the NPU task were good, but concerns were noted for corrugator potentiation in this task. Some concerns also were noted for the psychometric properties of both startle and corrugator modulation in the affective picture viewing task, in particular, for pleasant picture modulation. Psychometric properties of general startle reactivity in the resting state task were good. Some salient differences in the psychometric properties of the NPU and affective picture viewing tasks were observed within and across quantification methods. © 2016 The Authors. Psychophysiology published by Wiley Periodicals, Inc. on behalf of Society for Psychophysiological Research.

  8. Measuring the height-to-height correlation function of corrugation in suspended graphene

    Energy Technology Data Exchange (ETDEWEB)

    Kirilenko, D.A., E-mail: Demid.Kirilenko@mail.ioffe.ru [Ioffe Institute, Politekhnicheskaya ul. 26, 194021 St-Petersburg (Russian Federation); EMAT, Universiteit Antwerpen, Groenenborgerlaan 171, B-2020 Antwerpen (Belgium); Brunkov, P.N. [Ioffe Institute, Politekhnicheskaya ul. 26, 194021 St-Petersburg (Russian Federation); ITMO University, Kronverksky pr. 49, 197101 St. Petersburg (Russian Federation)

    2016-06-15

    Nanocorrugation of 2D crystals is an important phenomenon since it affects their electronic and mechanical properties. The corrugation may have various sources; one of them is flexural phonons that, in particular, are responsible for the thermal conductivity of graphene. A study of corrugation of just the suspended graphene can reveal much of valuable information on the physics of this complicated phenomenon. At the same time, the suspended crystal nanorelief can hardly be measured directly because of high flexibility of the 2D crystal. Moreover, the relief portion related to rapid out-of-plane oscillations (flexural phonons) is also inaccessible by such measurements. Here we present a technique for measuring the Fourier components of the height–height correlation function H(q) of suspended graphene which includes the effect of flexural phonons. The technique is based on the analysis of electron diffraction patterns. The H(q) is measured in the range of wavevectors q≈0.4–4.5 nm{sup −1}. At the upper limit of this range H(q) does follow the T/κq{sup 4} law. So, we measured the value of suspended graphene bending rigidity κ=1.2±0.4 eV at ambient temperature T≈300 K. At intermediate wave vectors, H(q) follows a slightly weaker exponent than theoretically predicted q{sup −3.15} but is closer to the results of the molecular dynamics simulation. At low wave vectors, the dependence becomes even weaker, which may be a sign of influence of charge carriers on the dynamics of undulations longer than 10 nm. The technique presented can be used for studying physics of flexural phonons in other 2D materials. - Highlights: • A technique for measuring free-standing 2D crystal corrugation is proposed. • The height-to-height correlation function of the suspended graphene corrugation is measured. • Various parameters of the intrinsic graphene properties are experimentally determined.

  9. Effects of antimicrobial peptide revealed by simulations: translocation, pore formation, membrane corrugation and euler buckling.

    Science.gov (United States)

    Chen, Licui; Jia, Nana; Gao, Lianghui; Fang, Weihai; Golubovic, Leonardo

    2013-04-11

    We explore the effects of the peripheral and transmembrane antimicrobial peptides on the lipid bilayer membrane by using the coarse grained Dissipative Particle Dynamics simulations. We study peptide/lipid membrane complexes by considering peptides with various structure, hydrophobicity and peptide/lipid interaction strength. The role of lipid/water interaction is also discussed. We discuss a rich variety of membrane morphological changes induced by peptides, such as pore formation, membrane corrugation and Euler buckling.

  10. Variable stiffness corrugated composite structure with shape memory polymer for morphing skin applications

    Science.gov (United States)

    Gong, Xiaobo; Liu, Liwu; Scarpa, Fabrizio; Leng, Jinsong; Liu, Yanju

    2017-03-01

    This work presents a variable stiffness corrugated structure based on a shape memory polymer (SMP) composite with corrugated laminates as reinforcement that shows smooth aerodynamic surface, extreme mechanical anisotropy and variable stiffness for potential morphing skin applications. The smart composite corrugated structure shows a low in-plane stiffness to minimize the actuation energy, but also possess high out-of-plane stiffness to transfer the aerodynamic pressure load. The skin provides an external smooth aerodynamic surface because of the one-sided filling with the SMP. Due to variable stiffness of the shape memory polymer the morphing skin exhibits a variable stiffness with a change of temperature, which can help the skin adjust its stiffness according different service environments and also lock the temporary shape without external force. Analytical models related to the transverse and bending stiffness are derived and validated using finite element techniques. The stiffness of the morphing skin is further investigated by performing a parametric analysis against the geometry of the corrugation and various sets of SMP fillers. The theoretical and numerical models show a good agreement and demonstrate the potential of this morphing skin concept for morphing aircraft applications. We also perform a feasibility study of the use of this morphing skin in a variable camber morphing wing baseline. The results show that the morphing skin concept exhibits sufficient bending stiffness to withstand the aerodynamic load at low speed (less than 0.3 Ma), while demonstrating a large transverse stiffness variation (up to 191 times) that helps to create a maximum mechanical efficiency of the structure under varying external conditions.

  11. Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation

    OpenAIRE

    Tumino, D; T. Ingrassia; V. Nigrelli; G. Pitarresi; V. Urso Miano

    2014-01-01

    In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this s...

  12. Slow-Wave Characteristics of Elliptical Corrugated Waveguides with a Concentric Circular Hole

    Institute of Scientific and Technical Information of China (English)

    XU Jin; WANG Wen-Xiang; YUE Ling-Na; WEI Yan-Yu; GONG Yu-Bin

    2006-01-01

    We present the formulation of elliptical corrugated waveguides with a concentric circular hole using the fieldmatching method and the addition theorem for Mathieu functions. The dispersion equation and the mean interaction impedance of this structure are derived separately. The numerical results, which are generally based on the current approach, agree well with the results obtained by the commercial software package CST. As a slow-wave structure, this structure has potential applications in high power microwave amplifiers and possibly filtering structures.

  13. The characteristics of an intense laser beam propagating in a corrugated plasma channel

    Science.gov (United States)

    Tian, Jian-Min; Tang, Rong-An; Hong, Xue-Ren; Yang, Yang; Wang, Li; Zhou, Wei-Jun; Xue, Ju-Kui

    2016-12-01

    The propagation of an intense laser beam in a corrugated plasma channel is investigated. By using the source-dependent expansion technique, an evolution equation of the laser spot size is derived. The behaviors including aperiodic oscillation, resonance, beat-like wave, and periodic oscillation with multipeak are found and analyzed. The formula for the instantaneous wave numbers of these oscillations is obtained. These theoretical findings are confirmed by the final numerical simulation.

  14. 46 CFR 95.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.15-15 Section 95.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 95.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  15. 46 CFR 154.520 - Piping calculations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping calculations. 154.520 Section 154.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Process Piping Systems § 154.520 Piping calculations. A piping system must be designed to meet...

  16. 46 CFR 108.475 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 108.475 Section 108.475 Shipping COAST GUARD... Extinguishing Systems Foam Extinguishing Systems § 108.475 Piping. (a) Each pipe, valve, and fitting in a foam... to remove liquid from the system. (e) Piping in a foam extinguishing system must be used only...

  17. 14 CFR 27.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 27.1123 Section 27.1123... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Exhaust System § 27.1123 Exhaust piping. (a) Exhaust piping... operating temperatures. (b) Exhaust piping must be supported to withstand any vibration and inertia loads...

  18. 46 CFR 197.336 - Pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure piping. 197.336 Section 197.336 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.336 Pressure piping. Piping systems that... must— (a) Meet the ANSI Code; (b) Have the point of connection to the integral piping system of...

  19. 46 CFR 64.95 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping. 64.95 Section 64.95 Shipping COAST GUARD... SYSTEMS Cargo Handling System § 64.95 Piping. (a) Piping, valves, flanges, and fittings used in the... the piping system must comply with § 56.60-25(c) of this chapter....

  20. 46 CFR 76.23-20 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.23-20 Section 76.23-20 Shipping COAST GUARD... System, Details § 76.23-20 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  1. 46 CFR 95.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.17-15 Section 95.17-15 Shipping COAST GUARD... Extinguishing Systems, Details § 95.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of Subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  2. 46 CFR 76.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.17-15 Section 76.17-15 Shipping COAST GUARD... Systems, Details § 76.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  3. 46 CFR 193.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.15-15 Section 193.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 193.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  4. Investigation of high-frequency pipe welding

    Science.gov (United States)

    Konovalov, Nikolai A.; Lakhno, Nikolay I.; Gushchin, A. G.; Putryk, N. D.; Kovalenko, Vladimir I.; Galkina, V. A.; Veselovsky, Vladimir B.; Furmanov, Valeri B.; Kovika, Nikolai D.; Novikov, Leonid V.; Shcherbina, V. N.

    1993-01-01

    For investigation of a pipe welding process at high-frequency heating aimed at increasing of pipe quality and decreasing of spoilage, the use of high-speed recording and TV-technique is considered to be effective. The authors have created a visual inspection system for pipe welding process studies at a tube mill of the Novomoskovsk Pipe Plant.

  5. 49 CFR 192.281 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.281 Section 192.281... Plastic pipe. (a) General. A plastic pipe joint that is joined by solvent cement, adhesive, or heat fusion may not be disturbed until it has properly set. Plastic pipe may not be joined by a threaded joint...

  6. 49 CFR 195.114 - Used pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Used pipe. 195.114 Section 195.114 Transportation... PIPELINE Design Requirements § 195.114 Used pipe. Any used pipe installed in a pipeline system must comply with § 195.112 (a) and (b) and the following: (a) The pipe must be of a known specification and the...

  7. 49 CFR 195.112 - New pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false New pipe. 195.112 Section 195.112 Transportation... PIPELINE Design Requirements § 195.112 New pipe. Any new pipe installed in a pipeline system must comply with the following: (a) The pipe must be made of steel of the carbon, low alloy-high strength, or alloy...

  8. 49 CFR 192.55 - Steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Steel pipe. 192.55 Section 192.55 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.55 Steel pipe. (a) New steel pipe is... in accordance with paragraph (c) or (d) of this section. (b) Used steel pipe is qualified for use...

  9. Design and Characterization of a Novel Rotating Corrugated Drum Reactor for Wastewater Treatment

    Directory of Open Access Journals (Sweden)

    Sarah M. Meunier

    2010-01-01

    Full Text Available A novel photoreactor system consisting of a TiO2-coated corrugated drum and a UV light source is experimentally characterized for the treatment of phenol-polluted wastewaters. The design incorporates periodic illumination and increased agitation through the introduction of rotation. The effects ofrent degrees and flat fins to increase surface area, varying rotational speed, initial pollutant concentration, and illumination intensities were studied. The corrugated and finned drums did not exhibit a critical rotational speed, indicating that there is excellent mass transfer in the system. A Langmuir-Hinshelwood kinetic analysis was applied to the degradation, and an average adsorption coefficient of K=0.120 L/mg was observed. The overall reaction rate increased with increasing surface area from 0.046 mg/L/min for the annular drum to 0.16 mg/L/min for the 40-fin drum. The apparent photonic efficiency was found to increase with increasing surface area at a faster rate for the corrugations than for the fin additions. The energy efficiency (EE/O found for the drums varied from 380–550 kWh/m3, which is up to 490% more energy-efficient than the annular drum.

  10. Molecular dynamics simulation of atomic-scale frictional behavior of corrugated nano-structured surfaces.

    Science.gov (United States)

    Kim, Hyun-Joon; Kim, Dae-Eun

    2012-07-01

    Surface morphology is one of the critical parameters that affect the frictional behavior of two contacting bodies in relative motion. It is important because the real contact area as well as the contact stiffness is dictated by the micro- and nano-scale geometry of the surface. In this regard, the frictional behavior may be controlled by varying the surface morphology through nano-structuring. In this study, molecular dynamics simulations were conducted to investigate the effects of contact area and structural stiffness of corrugated nano-structures on the fundamental frictional behavior at the atomic-scale. The nano-structured surface was modeled as an array of corrugated carbon atoms with a given periodicity. It was found that the friction coefficient of the nano-structured surface was lower than that of a smooth surface under specific contact conditions. The effect of applied load on the friction coefficient was dependent on the size of the corrugation. Furthermore, stiffness of the nano-structure was identified to be an important variable in dictating the frictional behavior.

  11. Atomic force spectroscopy and density-functional study of graphene corrugation on Ru(0001)

    Science.gov (United States)

    Voloshina, Elena; Dedkov, Yuriy

    2016-06-01

    Graphene, the thinnest material in the world, can form moiré structures on different substrates, including graphite, h -BN, or metal surfaces. In such systems, the structure of graphene, i.e., its corrugation, as well as its electronic and elastic properties, are defined by the combination of the system geometry and local interaction strength at the interface. The corrugation in such structures on metals is heavily extracted from diffraction or local probe microscopy experiments, and it can be obtained only via comparison with theoretical data, which usually simulate the experimental findings. Here we show that graphene corrugation on metals can be measured directly employing atomic force spectroscopy, and the obtained value coincides with state-of-the-art theoretical results. The presented results demonstrate an unexpected space selectivity for the Δ f (z ) signal in the atomic force spectroscopy in the moiré graphene lattice on Ru(0001), which is explained by the different response of the graphene layer on the indentation process. We also address the elastic reaction of the formed graphene nanodoms on the indentation process by the scanning tip that is important for the modeling and fabrication of graphene-based nanoresonators on the nanoscale.

  12. Method of Green’s function of nonlinear vibration of corrugated shallow shells

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the dynamic equations of nonlinear large deflection of axisymmetric shallow shells of revolution, the nonlinear free vibration and forced vibration of a corrugated shallow shell under concentrated load acting at the center have been investigated. The nonlinear partial differential equations of shallow shell were re-duced to the nonlinear integral-differential equations by using the method of Green’s function. To solve the integral-differential equations, the expansion method was used to obtain Green’s function. Then the integral-differential equations were reduced to the form with a degenerate core by expanding Green’s function as a series of characteristic function. Therefore, the integral-differential equations be-came nonlinear ordinary differential equations with regard to time. The ampli-tude-frequency relation, with respect to the natural frequency of the lowest order and the amplitude-frequency response under harmonic force, were obtained by considering single mode vibration. As a numerical example, nonlinear free and forced vibration phenomena of shallow spherical shells with sinusoidal corrugation were studied. The obtained solutions are available for reference to the design of corrugated shells.

  13. Method of Green's function of nonlinear vibration of corrugated shallow shells

    Institute of Scientific and Technical Information of China (English)

    YUAN Hong

    2008-01-01

    Based on the dynamic equations of nonlinear large deflection of axisymmetric shallow shells of revolution,the nonlinear free vibration and forced vibration of a corrugated shallow shell under concentrated load acting at the center have been investigated.The nonlinear partial differential equations of shallow shell were re-duced to the nonlinear integral-differential equations by using the method of Green's function.To solve the integral-differential equations,the expansion method was used to obtain Green's function.Then the integral-differential equations were reduced to the form with a degenerate core by expanding Green's function as a series of characteristic function.Therefore,the integral-differential equations be-came nonlinear ordinary differential equations with regard to time.The ampli-tude-frequency relation,with respect to the natural frequency of the lowest order and the amplitude-frequency response under harmonic force,were obtained by considering single mode vibration.As a numerical example,nonlinear free and forced vibration phenomena of shallow spherical shells with sinusoidal corrugation were studied.The obtained solutions are available for reference to the design of corrugated shells.

  14. Sound transmission across lightweight all-metallic sandwich panels with corrugated cores

    Institute of Scientific and Technical Information of China (English)

    XIN Fengxian; LU Tianjian; CHEN Changqing

    2009-01-01

    The transmission of sound through all-metallic sandwich panels with corrugated cores is investigated using the space-harmonic method. The sandwich panel is modeled as two parallel panels connected by uniformly distributed translational springs and rotational springs, with the mass of the core sheets taken as lumped mass. Based on the periodicity of the panel structure, a unit cell model is developed to provide the effective translational and rotational stiffness of the core. To check the validity of the model, it is used first to study the sound insulation properties of double-panel structures with air cavity, and the analytical predictions agree well with existing experimental data. The model is then employed to quantify the influence of sound incidence angle and the inclination angle between facesheet and core sheet on sound transmission loss (STL) across sandwich panels with corrugated cores. The results show that the inclination angle has a significant effect on STL and it is possible to avoid STL dips by altering the inclination angle. Moreover, it is found that sandwich panels with corrugated cores are more suitable for the insulation of sound waves having small incidence angles.

  15. Flow Regimes of Air-Water Counterflow Through Cross Corrugated Parallel Plates

    Energy Technology Data Exchange (ETDEWEB)

    de Almeida, V.F.

    2000-06-07

    Heretofore unknown flow regimes of air-water counterflow through a pair of transparent vertical parallel cross corrugated plates were observed via high-speed video. Air flows upward driven by pressure gradient and water, downward driven by gravity. The crimp geometry of the corrugations was drawn from typical corrugated sheets used as filling material in modern structured packed towers. Four regimes were featured, namely, rivulet, bicontinuous, flooding fronts, and flooding waves. It is conceivable that the regimes observed might constitute the basis for understanding how gas and liquid phases contend for available space in the interstices of structured packings in packed towers. Flow regime transitions were expressed in terms of liquid load (liquid superficial velocity) and gas flow factor parameters commonly used in pressure drop and capacity curves. We have carefully examined the range of parameters equivalent to the ill-understood high-liquid-flow operation in packed towers. More importantly, our findings should prove valuable in validating improved first-principles modeling of gas-liquid flows in these industrially important devices.

  16. Investigations of heat transfer and friction characteristics of compact cross-corrugated recuperators

    Science.gov (United States)

    Zhou, Guo-Yan; Tu, Shan-Tung; Ma, Hu-gen

    2014-09-01

    As one of the key devices in the high temperature gas turbine system, cross-corrugated recuperators provide high heat transfer capabilities with compact size, light weight, strong mechanical strength and are mandatory to achieve 30 % electrical efficiency or higher for micro turbine engines. Flow in such geometries is usually laminar with lower Reynolds numbers. In order to understand mechanisms of flowing and heat transfer, periodic fully developed fluid flow and heat transfer in two types of cross-corrugated structures with inclination angle at 90° are investigated numerically and experimentally. Periodicity was used to reduce the complexity of the channel geometry and enables the smallest possible segment of the flow channel to be modeled. The velocity and temperature distributions were obtained in the three-dimensional complex domain. Besides a detailed flow analysis, comparison of the local heat and mass transfer and the pressure losses for these geometries are presented. It is shown that the flow phenomena caused by the different geometries were of significant influence on the homogeneity and on the quantity of the local heat and mass transfer as well as on the pressure drop. As a recuperator for micro turbine engines, cross-corrugated sinusoidal channels are more preferable to triangular channels.

  17. Compact Elliptically Tapered Slot Antenna with Non-uniform Corrugations for Ultra-wideband Applications

    Directory of Open Access Journals (Sweden)

    F. G. Zhu

    2013-04-01

    Full Text Available A small size elliptically tapered slot antenna (ETSA fed by coplanar waveguide (CPW for ultra-wideband (UWB applications is proposed. It is printed on an FR4 substrate and occupies a size of 37×34×0.8 mm^3. A pair of quarter circular shapes is etched on the radiator to reduce the size. To overcome the limitation of uniform corrugation, non-uniform corrugation is utilized to reduce the cross-polarization level. A parametric study is carried out to investigate the effects of circular cut and corrugations. In order to validate the design, a prototype is fabricated and measured. Both simulated and measured results confirm that the proposed antenna achieves a good performance of a reflection coefficient below -10 dB from 3.1 GHz to 10.6 GHz, including a maximum antenna gain of 8.1dBi, directional patterns in the end-fire direction, low cross-polarization level below -20 dB and linear phase response. The antenna is promising for applications in UWB impulse radar imaging.

  18. Soda-Anthraquinone Durian (Durio Zibethinus Murr.) Rind Linerboard and Corrugated Medium Paper: A Preliminary Test

    Science.gov (United States)

    Rizal Masrol, Shaiful; Irwan Ibrahim, Mohd Halim; Adnan, Sharmiza; Mubarak Sa'adon, Amir; Ika Sukarno, Khairil; Fadrol Hisham Yusoff, Mohd

    2017-08-01

    A preliminary test was conducted to investigate the characteristics of linerboard and corrugated medium paper made from durian rind waste. Naturally dried durian rinds were pulped according to Soda-Anthraquinone (Soda-AQ) pulping process with a condition of 20% active alkali, 0.1% AQ, 7:1 liquor to material ratio, 120 minutes cooking time and 170°C cooking temperature. The linerboard and corrugated medium paper with a basis weight of 120 gsm were prepared and evaluated according to Malaysian International Organization for Standardization (MS ISO) and Technical Association of the Pulp and Paper Industry (TAPPI). The results indicate that the characteristics of durian rind linerboard are comparable with other wood or non-wood based paper and current commercial paper. However, low CMT value for corrugated medium and water absorptiveness quality for linerboard could be improved in future. Based on the bulk density (0.672 g/cm3), burst index (3.12 kPa.m2/g) and RCT (2.00 N.m2/g), the durian rind has shown a good potential and suitable as an alternative raw material source for linerboard industry.

  19. Design of corrugated-horn-coupled MKID focal plane for CMB B-mode polarization

    Science.gov (United States)

    Sekimoto, Yutaro; Sekiguchi, Shigeyuki; Shu, Shibo; Sekine, Masakazu; Nitta, Tom; Naruse, Masato; Dominjon, Agnes; Hasebe, Takashi; Shan, Wenlei; Noguchi, Takashi; Miyachi, Akihira; Mita, Makoto; Kawasaki, Shigeo

    2016-07-01

    A focal plane based on MKID has been designed for cosmic microwave background (CMB) B-mode polarization experiments. We are designing and developing a focal plane with broadband corrugated horn array, planar OMT, 180 degree hybrid, bandpass filters, and MKIDs. The focal plane consists of 3 octave bands (55 - 108 GHz, 80 - 160 GHz, 160 - 320 GHz), 10 hexagonal modules. Broadband corrugated horn-array has been directly machined from an Al block and measured to have a good beam shape which is consistent with electromagnetic field simulations in octave bands. The horn array is designed to be low standing-wave, light weight, and electromagnetic shield. The broadband 4 probes ortho-mode transducer (OMT) is fabricated on Si membrane of an SOI wafer. A broadband 180 degree hybrid made with coplanar waveguide (CPW) is used to reduce higher modes of the circular waveguide. Two bandpass filters of each polarization are patterned with Nb microstrip. A prototype of the broadband corrugated horn coupled MKIDs has been fabricated and tested.

  20. Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-09-19

    This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

  1. Loop Heat Pipe Startup Behaviors

    Science.gov (United States)

    Ku, Jentung

    2016-01-01

    A loop heat pipe must start successfully before it can commence its service. The startup transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe startup behaviors. Topics include the four startup scenarios, the initial fluid distribution between the evaporator and reservoir that determines the startup scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power startup, and methods to enhance the startup success. Also addressed are the pressure spike and pressure surge during the startup transient, and repeated cycles of loop startup and shutdown under certain conditions.

  2. Nitrogen heat pipe for cryocooler thermal shunt

    Energy Technology Data Exchange (ETDEWEB)

    Prenger, F.C.; Hill, D.D.; Daney, D.E.; Daugherty, M.A. [Los Alamos National Lab., NM (United States); Green, G.F.; Roth, E.W. [Naval Surface Warfare Center, Annapolis, MD (United States)

    1995-09-01

    A nitrogen heat pipe was designed, built and tested for the purpose of providing a thermal shunt between the two stages of a Gifford-McMahan (GM) cryocooler during cooldown. The nitrogen heat pipe has an operating temperature range between 63 and 123 K. While the heat pipe is in the temperature range during the system cooldown, it acts as a thermal shunt between the first and second stage of the cryocooler. The heat pipe increases the heat transfer to the first stage of the cryocooler, thereby reducing the cooldown time of the system. When the heat pipe temperature drops below the triple point, the nitrogen working fluid freezes, effectively stopping the heat pipe operation. A small heat leak between cryocooler stages remains because of axial conduction along the heat pipe wall. As long as the heat pipe remains below 63 K, the heat pipe remains inactive. Heat pipe performance limits were measured and the optimum fluid charge was determined.

  3. A Multifrequency Notch Filter for Millimeter Wave Plasma Diagnostics based on Photonic Bandgaps in Corrugated Circular Waveguides

    Directory of Open Access Journals (Sweden)

    Wagner D.

    2015-01-01

    Full Text Available Sensitive millimeter wave diagnostics need often to be protected against unwanted radiation like, for example, stray radiation from high power Electron Cyclotron Heating applied in nuclear fusion plasmas. A notch filter based on a waveguide Bragg reflector (photonic band-gap may provide several stop bands of defined width within up to two standard waveguide frequency bands. A Bragg reflector that reflects an incident fundamental TE11 into a TM1n mode close to cutoff is combined with two waveguide tapers to fundamental waveguide diameter. Here the fundamental TE11 mode is the only propagating mode at both ends of the reflector. The incident TE11 mode couples through the taper and is converted to the high order TM1n mode by the Bragg structure at the specific Bragg resonances. The TM1n mode is trapped in the oversized waveguide section by the tapers. Once reflected at the input taper it will be converted back into the TE11 mode which then can pass through the taper. Therefore at higher order Bragg resonances, the filter acts as a reflector for the incoming TE11 mode. Outside of the Bragg resonances the TE11 mode can propagate through the oversized waveguide structure with only very small Ohmic attenuation compared to propagating in a fundamental waveguide. Coupling to other modes is negligible in the non-resonant case due to the small corrugation amplitude (typically 0.05·λ0, where λ0 is the free space wavelength. A Bragg reflector for 105 and 140 GHz was optimized by mode matching (scattering matrix simulations and manufactured by SWISSto12 SA, where the required mechanical accuracy of ± 5 μm could be achieved by stacking stainless steel rings, manufactured by micro-machining, in a high precision guiding pipe. The two smooth-wall tapers were fabricated by electroforming. Several measurements were performed using vector network analyzers from Agilent (E8362B, ABmm (MVNA 8-350 and Rohde&Schwarz (ZVA24 together with frequency multipliers. The

  4. 49 CFR 192.279 - Copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Copper pipe. 192.279 Section 192.279... Copper pipe. Copper pipe may not be threaded except that copper pipe used for joining screw fittings or... heavier wall pipe listed in Table C1 of ASME/ANSI B16.5. [Amdt. 192-62, 54 FR 5628, Feb. 6, 1989, as...

  5. B Plant process piping replacement feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  6. Efficient methods of piping cleaning

    OpenAIRE

    Orlov Vladimir Aleksandrovich; Nechitaeva Valentina Anatol'evna; Bogomolova Irina Olegovna; Shaykhetdinova Yuliya Aleksandrovna; Daminova Yuliya Farikhovna

    2014-01-01

    The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of d...

  7. Corrosion behavior in heat pipe

    Directory of Open Access Journals (Sweden)

    Anurak Rodbumrung

    2016-01-01

    Full Text Available The aim of this study was to perform life testing and determine the effect of working fluid on the corrosion of a heat pipe with a sintered wick. The heat pipe was made from a copper tube. The inner heat pipe was filled with 99.97% pure copper powder as a dendritic for the sintering process. The heat pipe had an outer diameter of 6 mm with a length of 200 mm, and distilled water and ethanol were the working fluids. The operating temperature at the evaporator was 125°C. The analysis consisted of using a scanning electron microscope, energy dispersive X-ray spectrometry and atomic absorption spectroscopy. The results of the scanning electron microscope and energy dispersive X-ray spectrometry analysis showed that the corrosion of the heat pipe was uniform. The result of the atomic absorption spectroscopy indicated that the concentration of the copper in the ethanol as the working fluid was greater than in the distilled water as the working fluid, and the highest concentration of copper particles in the ethanol was 22.7499 ppm or 0.0409 mg after testing for 3000 h. The concentration of copper was higher when the length of the life test increased due to corrosion of the heat pipe.

  8. Heat pipe turbine vane cooling

    Energy Technology Data Exchange (ETDEWEB)

    Langston, L.; Faghri, A. [Univ. of Connecticut, Storrs, CT (United States)

    1995-10-01

    The applicability of using heat pipe principles to cool gas turbine vanes is addressed in this beginning program. This innovative concept involves fitting out the vane interior as a heat pipe and extending the vane into an adjacent heat sink, thus transferring the vane incident heat transfer through the heat pipe to heat sink. This design provides an extremely high heat transfer rate and an uniform temperature along the vane due to the internal change of phase of the heat pipe working fluid. Furthermore, this technology can also eliminate hot spots at the vane leading and trailing edges and increase the vane life by preventing thermal fatigue cracking. There is also the possibility of requiring no bleed air from the compressor, and therefore eliminating engine performance losses resulting from the diversion of compressor discharge air. Significant improvement in gas turbine performance can be achieved by using heat pipe technology in place of conventional air cooled vanes. A detailed numerical analysis of a heat pipe vane will be made and an experimental model will be designed in the first year of this new program.

  9. Thermal Characterization of the Gelatinization of Corn Starch Suspensions with Added Sodium Hydroxide or Urea as a Main Component of Corrugating Adhesives

    National Research Council Canada - National Science Library

    Koyakumaru, Takatoshi; Nakano, Hirofumi

    2016-01-01

    The effects of sodium hydroxide and urea on the gelatinization of corn starch suspensions, a main component of corrugating starch adhesives, were studied using differential scanning calorimetry (DSC...

  10. Effects of corrugation shape on frequency band-gaps for longitudinal wave motion in a periodic elastic layer

    DEFF Research Database (Denmark)

    Sorokin, Vladislav

    2016-01-01

    The paper concerns determining frequency band-gaps for longitudinal wave motion in a periodic waveguide. The waveguide may be considered either as an elastic layer with variable thickness or as a rod with variable cross section. As a result, widths and locations of all frequency band-gaps are det......The paper concerns determining frequency band-gaps for longitudinal wave motion in a periodic waveguide. The waveguide may be considered either as an elastic layer with variable thickness or as a rod with variable cross section. As a result, widths and locations of all frequency band......-gaps are determined by means of the method of varying amplitudes. For the general symmetric corrugation shape, the width of each odd band-gap is controlled only by one harmonic in the corrugation series with its number being equal to the number of the band-gap. Widths of even band-gaps, however, are influenced by all...... the harmonics involved in the corrugation series, so that the lower frequency band-gaps can emerge. These are band-gaps located below the frequency corresponding to the lowest harmonic in the corrugation series. For the general non-symmetric corrugation shape, the mth band-gap is controlled only by one, the mth...

  11. Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation

    Directory of Open Access Journals (Sweden)

    D. Tumino

    2014-10-01

    Full Text Available In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this structure with an orthotropic equivalent thick plate that reproduces the in plane and out of plane behaviour of the original geometry. Different validation procedures have been implemented to verify the quality of the proposed method. At first a comparison has been performed between the analytical model and the original unit cell modelled with a Finite Element mesh. Elementary loading conditions are reproduced and results are compared. Once the reliability of the analytical model was assessed, this homogenised model was implemented within the formulation of a shell finite element. The goal of this step is to simplify the FE analysis of complex structures made of corrugated core sandwiches; in fact, by using the homogenised element, the global response of a real structure can be investigated only with the discretization of its mid-surface. Advantages are mainly in terms of time to solution saving and CAD modelling simplification. Last step is then the comparison between this FE model and experiments made on sandwich beams and panels whose skins and corrugated cores are made of orthotropic cross-ply GRP laminates. Good agreement between experimental and numerical results confirms the validity of the proposed model.

  12. Influence of corrugation shape in steel bars ductility used on reinforced concrete

    Science.gov (United States)

    Hortigón, B.; Nieto, E. J.; Fernández, F.; Hernández, O.

    2012-04-01

    Necking process stress and strain analysis, which is key to determine the plastic flow evolution in finite deformation, has been widely studied and applied to a number of materials based on the theories established by Davidenkov-Spiridnova and Bridgman in the 40's decade. These theories envolve from the study of necking geometry in fracture. In this paper, we develop an exhaustive experimental analysis of the stress and strain field in the necking process, applied to concrete bars and mechanized samples with similar features, in order to compare the results with the ones given by the theories listed above and to look for the corrugation influence in the material's plastic behavior.

  13. Superresolution observed from evanescent waves transmitted through nano-corrugated metallic films

    CERN Document Server

    Ben-Aryeh, Y

    2015-01-01

    Plane EM waves transmitted through nano-corrugated metallic thin films produce evanescent waves which include the information on the nano-structures. The production of the evanescent waves at the metallic surface are analyzed. A microsphere located above the metallic surface collects the evanescent waves which are converted into propagating waves. The equations for the refraction at the boundary of the microsphere and the use of Snell's law for evanescent waves are developed. The magnification of the nano-structure images is explained by a geometric optics description, but the high resolution is related to the evanescent waves properties.

  14. Corrugated flat band as an origin of large thermopower in hole doped PtSb2

    Directory of Open Access Journals (Sweden)

    Kouta Mori

    2012-12-01

    Full Text Available The origin of the recently discovered large thermopower in hole-doped PtSb2 is theoretically analyzed based on a model constructed from first principles band calculation. It is found that the valence band dispersion has an overall flatness combined with some local ups and downs, which gives small Fermi surfaces scattered over the entire Brillouin zone. The Seebeck coefficient is calculated using this model, which gives good agreement with the experiment. We conclude that the good thermoelectric property originates from this “corrugated flat band”, where the coexistence of large Seebeck coefficient and large electric conductivity is generally expected.

  15. Excitation of a double corrugation slow-wave structure in terahertz range

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Krozer, Viktor; Kotiranta, Mikko;

    2011-01-01

    In spite of the fact that the technology is constantly advancing, the realization of terahertz components is still heavily constrained by problems arising from technological limitations. As a result, the design of terahertz components still remains a challenging problem. In this work, an excitation...... problem of a terahertz double corrugation slow-wave structure is considered and practical realization of the structure using currently available technological processes is discussed. The parameters of the realized excitation structure are optimized for vacuum electronics applications while taking...

  16. Theory and Monte-Carlo simulation of adsorbates on corrugated surfaces

    DEFF Research Database (Denmark)

    Vives, E.; Lindgård, P.-A.

    1993-01-01

    Phase transitions in systems of adsorbed molecules on corrugated surfaces are studied by means of Monte Carlo simulation. Particularly, we have studied the phase diagram of D2 on graphite as a function of coverage and temperature. We have demonstrated the existence of an intermediate gamma......-phase between the commensurate and incommensurate phase stabilized by defects. Special attention has been given to the study of the epitaxial rotation angles of the different phases. Available experimental data is in agreement with the simulations and with a general theory for the epitaxial rotation which takes...

  17. Theoretical study of the transmission properties of a metallic film with surface corrugations

    DEFF Research Database (Denmark)

    Xiao, Sanshui; Qiu, Min

    2007-01-01

    Transmissions through a metallic film at near-infrared wavelengths with different surface corrugations on both sides are systemically studied. The calculations are performed by the three-dimensional finite-different time-domain method. Calculated results show that the transmissions are strongly...... dependent on the surface structures. Compared with other structures, the transmission for a film periodically drilled by cross air grooves are relatively larger. Transmission is enhanced more with symmetric conditions on both layers than the asymmetric case. The enhanced transmission can be explained...... by a competition between the absorption in the metal and enhanced transmission due to coupled surface plasmon resonance....

  18. Terahertz surface plasmon polariton propagation and focusing on periodically corrugated metal wires

    CERN Document Server

    Maier, S A; García-Vidal, F J; Martín-Moreno, L; Andrews, Steve R.; Maier, Stefan A.

    2006-01-01

    In this letter we show how the dispersion relation of surface plasmon polaritons (SPPs) propagating along a perfectly conducting wire can be tailored by corrugating its surface with a periodic array of radial grooves. In this way, highly localized SPPs can be sustained in the terahertz region of the electromagnetic spectrum. Importantly, the propagation characteristics of these spoof SPPs can be controlled by the surface geometry, opening the way to important applications such as energy concentration on cylindrical wires and superfocusing using conical structures.

  19. Thermal Characteristics of a Primary Surface Heat Exchanger with Corrugated Channels

    OpenAIRE

    2015-01-01

    This paper presents the heat transfer and pressure drop characteristics of a primary surface heat exchanger (PSHE) with corrugated surfaces. The PSHE was experimentally investigated for a Reynolds number range of 156–921 under various flow conditions on the hot and cold sides. The inlet temperature of the hot side was maintained at 40 °C, while that of the cold side was maintained at 20 °C. A counterflow was used as it has a higher temperature proximity in comparison with a parallel flow. The...

  20. An optical fiber Fabry-Perot pressure sensor using corrugated diaphragm and angle polished fiber

    Science.gov (United States)

    Zhu, Jiali; Wang, Ming; Chen, Lu; Ni, Xiaoqi; Ni, Haibin

    2017-03-01

    In this paper, a Fabry-Perot pressure sensor using a corrugated diaphragm and angle polished fiber is proposed. A SU-8 structure using two step of lithography is formed to fix the polished fiber, which helps control the cavity length precisely. The fabrication process is described. The characteristics of both pressure and temperature are tested. Also the temperature compensation is realized. Experimental results show that the sensor has high sensitivity and good linearity over the pressure range of 0-0.1 MPa. The sensitivity (change in cavity/loaded pressure) is 705.64 μm/MPa.

  1. Analytical estimates of free brownian diffusion times in corrugated narrow channels.

    Science.gov (United States)

    Bosi, Leone; Ghosh, Pulak K; Marchesoni, Fabio

    2012-11-07

    The diffusion of a suspended brownian particle along a sinusoidally corrugated narrow channel is investigated to assess the validity of two competing analytical schemes, both based on effective one-dimensional kinetic equations, one continuous (entropic channel scheme) and the other discrete (random walker scheme). For narrow pores, the characteristic diffusion time scale is represented by the mean first exit time out of a channel compartment. Such a diffusion time has been analytically calculated in both approximate schemes; the two analytical results coincide in leading order and are in excellent agreement with the simulation data.

  2. High performance WR-1.5 corrugated horn based on stacked rings

    CERN Document Server

    Maffei, Bruno; de Rijk, Emile; Ansermet, Jean-Philippe; Pisano, Giampaolo; Legg, Stephen; Macor, Alessandro

    2014-01-01

    We present the development and characterisation of a high frequency (500-750 GHz) corrugated horn based on stacked rings. A previous horn design, based on a Winston profile, has been adapted for the purpose of this manufacturing process without noticeable RF degradation. A subset of experimental results obtained using a vector network analyser are presented and compared to the predicted performance. These first results demonstrate that this technology is suitable for most commercial applications and also astronomical receivers in need of horn arrays at high frequencies.

  3. Mode Characterization for Planar and Corrugated Multilayer Structures via Scattering Matrix Analysis

    CERN Document Server

    Kneale, Casey; Booksh, Karl S

    2016-01-01

    The construction of the unconditionally stable planar rank 2 scattering matrix for stratified systems is detailed from Fresnel equations. Several matrix decompositions and numerical calculations performed on the planar S matrix allow for the expedient characterization of purely absorbing, brewster, surface plasmon, and wave-guide modes. A figure of merit is presented from the decompositions of the scattering matrix constructed from the Chandezon method for corrugated surfaces. This figure of merit represents the hyper-area of the scattering matrix transform and allows for rapid distinguishability between lossy absorption phenomena, and surface plasmons. Some extension of this technique is possible for surface plasmon polaritons in the infrared region.

  4. Importance of anisotropy on design of compression-loaded composite corrugated panels

    Science.gov (United States)

    Gurdal, Zafer; Young, Richard D.

    1990-01-01

    An investigation is conducted of the importance of anisotropic terms in the design of composite corrugated panels, for a range of axial compressive load intensities. The two panel configurations treated were panels with tailored laminates and panels with a continuous laminate; both are of interest to aircraft designers and prone to anisotropic effects which are of as-yet undetermined extent. The importance of the anisotropic terms is measured by the difference between the design load and the buckling load obtained from the ultimate structural analysis.

  5. Design and Realization Aspects of 1-THz Cascade Backward Wave Amplifier Based on Double Corrugated Waveguide

    DEFF Research Database (Denmark)

    Paoloni, Claudio; Di Carlo, Aldo; Bouamrane, Fayçal

    2013-01-01

    The design and fabrication challenges in the first ever attempt to realize a 1-THz vacuum tube amplifier are described. Implementation of innovative solutions including a slow-wave structure in the form of a double corrugated waveguide, lateral tapered input and output couplers, deep X-ray LIGA...... fabrication process, and a cascade architecture of the backward wave amplifier are discussed. New knowledge in the field of terahertz vacuum devices brought by intensive simulations and development of advanced fabrication and assembly processes of the micro-structures is highlighted....

  6. Radiation characteristics of electromagnetic eigenmodes at the corrugated interface of a left-handed material.

    Science.gov (United States)

    Cuevas, Mauro; Depine, Ricardo A

    2009-08-28

    We study the radiation characteristics of electromagnetic surface waves at a periodically corrugated interface between a conventional and a negatively refracting (or left-handed) material. In this case, and contrary to the surface plasmon polariton in a metallic grating, surface plasmon polaritons may radiate on both sides of the rough interface along which they propagate. We find novel radiation regimes which provide an indirect demonstration of other unusual phenomena characteristic of electromagnetic wave propagation in left-handed materials, such as negative refraction or backward wave propagation.

  7. A study of structurally efficient graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

    Science.gov (United States)

    Jegley, Dawn C.

    1993-01-01

    The structural efficiency of compression-loaded trapezoidal-corrugation sandwich and semi-sandwich composite panels is studied to determine their weight savings potential. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered. An optimization code is used to find the minimum weight designs for critical compressive load levels ranging from 3,000 to 24,000 lb/in. Graphite-thermoplastic panels based on the optimal minimum weight designs were fabricated and tested. A finite-element analysis of several test specimens was also conducted. The results of the optimization study, the finite-element analysis, and the experiments are presented.

  8. Dispersion relation and growth rate for a corrugated channel free-electron laser with a helical wiggler pump

    Institute of Scientific and Technical Information of China (English)

    A.Hasanbeigi; H.Mehdian

    2013-01-01

    The effects of corrugated ion channels on electron trajectories and spatial growth rate for a free-electron laser with a one-dimensional helical wiggler have been investigated.Analysis of the steady-state electron trajectories is performed by solving the equations of motion.Our results show that the presence of a corrugated channel shifts the resonance frequency to smaller values of ion channel frequency.The sixth-order dispersion equation describing the coupling between the electrostatic beam mode and the electromagnetic mode has also been derived.The dispersion relation characteristic is analyzed in detail by numerical solution.Results show that the growth rate of instability in the presence of corrugated ion channels can be greatly enhanced relative to the case of an uniform ion channel.

  9. Flat heat pipe design, construction, and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Voegler, G.; Boughey, B.; Cerza, M.; Lindler, K.W.

    1999-08-02

    This paper details the design, construction and partial analysis of a low temperature flat heat pipe in order to determine the feasibility of implementing flat heat pipes into thermophotovoltaic (TPV) energy conversion systems.

  10. 46 CFR 61.15-5 - Steam piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steam piping. 61.15-5 Section 61.15-5 Shipping COAST... Periodic Tests of Piping Systems § 61.15-5 Steam piping. (a) Main steam piping shall be subjected to a.... If the covering of the piping is not removed, the test pressure shall be maintained on the piping...

  11. 49 CFR Appendix B to Part 192 - Qualification of Pipe

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Qualification of Pipe B Appendix B to Part 192... Pipe I. Listed Pipe Specifications API 5L—Steel pipe, “API Specification for Line Pipe” (incorporated by reference, see § 192.7). ASTM A53/A53M—Steel pipe, “Standard Specification for Pipe, Steel Black...

  12. Introduction to Loop Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Loop Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. This course will discuss operating principles and performance characteristics of a loop heat pipe. Topics include: 1) pressure profiles in the loop; 2) loop operating temperature; 3) operating temperature control; 4) loop startup; 4) loop shutdown; 5) loop transient behaviors; 6) sizing of loop components and determination of fluid inventory; 7) analytical modeling; 8) examples of flight applications; and 9) recent LHP developments.

  13. 46 CFR 169.652 - Bilge piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bilge piping. 169.652 Section 169.652 Shipping COAST... Electrical Bilge Systems § 169.652 Bilge piping. (a) All vessels of 26 feet in length and over must be... than 120 feet in length the bilge pipe must be not less than one and one-half inches. Piping on...

  14. China Steel Pipes Demand Rising Steadily

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Steel pipes industry is an industry to play a decisive role in the national economic development. During the Tenth Five-Year Plan period, the steel pipes output has been increased distinctly. Based on experts forecast,the steel pipes demand in China will still be in tendency of increase during the Eleventh FiveYear Plan period, which will doubtlessly bring new opportunity and challenge to the steel pipes enterprises in China.

  15. 46 CFR 76.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.15-15 Section 76.15-15 Shipping COAST GUARD... Extinguishing Systems, Details § 76.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 p.s.i. (b) All piping, in nominal sizes not over 3/4 inch, shall be...

  16. Assessment of the integrity of welded pipes

    OpenAIRE

    Šarkoćević, Živče; Arsić, Miodrag; Sedmak, Aleksandar; MEĐO, Bojan; Mišić, Milan; id_orcid 0000-0003-0550-1851

    2014-01-01

    The subject of the paper is analysis of the integrity of welded pipes made of API J55 steel by high frequency contact welding (HF). Experimental research on the mechanical properties of the base material was conducted on pipes withdrawn from exploatation after 70 000 hours at service. Defect influence of the surface crack on the integrity of pipes was tested using hydrostatic pressure of pipes with axial surface crack in the base material. Fracture behaviour was tested using modified compact ...

  17. BIMORPH PIEZOELECTRIC ACTUATOR FOR SMALL PIPE ROBOT

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    An experimental bimorph piezoelectric element (PZT) actuator for small pipe robot is developed. The robotcan move in φ 20 mm pipe, and can carry a CCD camera for detecting cracks or fine holes on inner surface of pipe. Thevelocity of the robot can reach 17~22 mm/s for vertical pipe up/down, respectively. Moving principle and its perfor-mance characteristics are presented.

  18. Analysis of Municipal Pipe Network Franchise Institution

    Science.gov (United States)

    Yong, Sun; Haichuan, Tian; Feng, Xu; Huixia, Zhou

    Franchise institution of municipal pipe network has some particularity due to the characteristic of itself. According to the exposition of Chinese municipal pipe network industry franchise institution, the article investigates the necessity of implementing municipal pipe network franchise institution in China, the role of government in the process and so on. And this offers support for the successful implementation of municipal pipe network franchise institution in China.

  19. Smoking water pipe is injurious to lungs

    DEFF Research Database (Denmark)

    Sivapalan, Pradeesh; Ringbæk, Thomas; Lange, Peter

    2014-01-01

    This review describes the pulmonary consequences of water pipe smoking. Smoking water pipe affects the lung function negatively, is significantly associated with chronic obstructive pulmonary disease and increases the risk of lung infections. Case reports suggest that regular smokers of water pipe...

  20. 46 CFR 108.449 - Piping tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping tests. 108.449 Section 108.449 Shipping COAST... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.449 Piping tests. (a... piping installation. (b) When tested with CO2 or other inert gas under a pressure of 70 kilograms...

  1. 14 CFR 29.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 29.1123 Section 29.1123... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Exhaust System § 29.1123 Exhaust piping. (a) Exhaust piping must be heat and corrosion resistant, and must have provisions to prevent failure due to...

  2. 46 CFR 76.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.10-15 Section 76.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 76.10-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements...

  3. 49 CFR 195.128 - Station piping.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Station piping. 195.128 Section 195.128 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.128 Station piping. Any pipe to be installed in a station that...

  4. 46 CFR 193.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.10-15 Section 193.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 193.10-15 Piping. (a) All piping, valves, and fittings, shall meet...

  5. 46 CFR 95.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.10-15 Section 95.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 95.10-15 Piping. (a) All piping, valves, and fittings shall meet the...

  6. 14 CFR 25.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 25.1123 Section 25.1123... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Exhaust System § 25.1123 Exhaust piping. For powerplant and auxiliary power unit installations, the following apply: (a) Exhaust piping must be heat...

  7. 46 CFR 132.110 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 132.110 Section 132.110 Shipping COAST GUARD....110 Piping. (a) Except as provided for liftboats by § 134.180 of this subchapter, each fitting, flange, valve, and run of piping must meet the applicable requirements of part 128 of this subchapter....

  8. Thermodynamic aspects of heat pipe operation

    Science.gov (United States)

    Richter, Robert; Gottschlich, Joseph

    1990-01-01

    An expanded heat pipe operating model is described which includes thermodynamic and heat transfer considerations to reconcile disparities between actual and theoretical heat pipe performances. The analysis shows that thermodynamic considerations can explain the observed heat pipe performance limitations. A full understanding of thermodynamic processes could lead to advanced concepts for thermal transport devices.

  9. 46 CFR 154.660 - Pipe welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pipe welding. 154.660 Section 154.660 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR... § 154.660 Pipe welding. (a) Pipe welding must meet Part 57 of this chapter. (b) Longitudinal butt...

  10. 49 CFR 192.59 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.59 Section 192.59 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.59 Plastic pipe. (a) New plastic pipe... specification; and (2) It is resistant to chemicals with which contact may be anticipated. (b) Used plastic...

  11. 49 CFR 236.712 - Brake pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Brake pipe. 236.712 Section 236.712 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.712 Brake pipe. A pipe...

  12. 46 CFR 76.25-30 - Piping.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Automatic Sprinkling System, Details § 76.25-30 Piping. (a) All piping, valves, and fittings of ferrous materials shall be... piping, valves, fittings, and sprinkler heads shall be securely supported, and, where...

  13. 33 CFR 127.1101 - Piping systems.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Piping systems. 127.1101 Section... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1101 Piping systems. Each piping system within the marine transfer area for LHG used for the transfer of LHG must meet the...

  14. 46 CFR 56.10-5 - Pipe.

    Science.gov (United States)

    2010-10-01

    ...) Ferrous pipe. ASTM Specification A 53 (incorporated by reference, see § 56.01-2) furnace welded pipe shall... found from Table 56.60-1(a). (3) Copper-nickel alloys may be used for water and steam service within the... specifically permitted by this part. (6) Aluminum-alloy pipe or tube along with similar junction equipment may...

  15. Energy corrugation in atomic-scale friction on graphite revisited by molecular dynamics simulations

    Institute of Scientific and Technical Information of China (English)

    Xiao-Yu Sun; Yi-Zhou Qi; Wengen Ouyang; Xi-Qiao Feng; Qunyang Li

    2016-01-01

    Although atomic stick–slip friction has been extensively studied since its first demonstration on graphite, the physical understanding of this dissipation-dominated phenomenon is still very limited. In this work, we perform molecular dynamics (MD) simulations to study the frictional behavior of a diamond tip sliding over a graphite surface. In contrast to the common wisdom, our MD results suggest that the energy barrier associated lateral sliding (known as energy corrugation) comes not only from interaction between the tip and the top layer of graphite but also from interactions among the deformed atomic layers of graphite. Due to the competi-tion of these two subentries, friction on graphite can be tuned by controlling the relative adhesion of different interfaces. For relatively low tip-graphite adhesion, friction behaves nor-mally and increases with increasing normal load. However, for relatively high tip-graphite adhesion, friction increases unusually with decreasing normal load leading to an effec-tively negative coefficient of friction, which is consistent with the recent experimental observations on chemically modified graphite. Our results provide a new insight into the physical origins of energy corrugation in atomic scale friction.

  16. Investigation of a corrugated channel flow with an open source PIV software

    Directory of Open Access Journals (Sweden)

    Sivas Deniz

    2016-01-01

    Full Text Available In this study, the corrugated channel flow was investigated by using an open-source particle image velocimetry (PIV software. The open-source software called OpenPIV was first verified by using images of an earlier experimental work of a vortex ring formation. The corrugated channel flow images were taken with 200 W power LED light source and a high speed camera and those images were analysed with these spatial and temporal tools of OpenPIV. Laminar, transient and turbulent flow regimes were identified when Reynolds number was below 1100, in between 1100 and 2000 and higher than 2000, respectively. The velocity vectors were found to be about 20% lower than the previous study results. The flow inside the grooves was also investigated with OpenPIV and flow characteristics at the grooves were captured when interrogation window size was lowered. The visualization of the flow was presented for different Reynolds numbers with the relative scale values. As a result of this study, OpenPIV software was determined as promising open source PIV analysis software.

  17. High-efficiency wideband gyro-TWTs and gyro-BWOs with helically corrugated waveguides

    Science.gov (United States)

    Bratman, V. L.; Denisov, G. G.; Samsonov, S. V.; Cross, A. W.; Phelps, A. D. R.; Xe, W.

    2007-02-01

    We review the studies of gyrotron-type microwave devices whose electrodynamic system has the form of an oversized metal waveguide with a helically corrugated internal surface. For certain parameters, such a corrugation changes radically the waveguide dispersion ensuring an almost constant group velocity of the eigenmode for a small (close to zero) longitudinal wave number in a wide frequency band. The use of “helical” waveguides along with electron optical systems which form near-axis electron beams makes it possible to create high-efficiency amplifiers based on gyro-traveling-wave tubes (gyro-TWTs) with a wide instantaneous frequency band of amplification and gyro-backward-wave oscillators (gyro-BWOs) with continuous wideband tuning of the oscillation frequency. The studied devices are superior to the well-studied microwave sources of this type (gyroklystrons and gyrotrons) in frequency band, by more than an order of magnitude, and are not inferior to them in efficiency even for a wide spread of electron velocities.

  18. Corrugation of Phase-Separated Lipid Bilayers Supported by Nanoporous Silica Xerogel Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Goksu, E I; Nellis, B A; Lin, W; Satcher Jr., J H; Groves, J T; Risbud, S H; Longo, M L

    2008-10-30

    Lipid bilayers supported by substrates with nanometer-scale surface corrugations holds interest in understanding both nanoparticle-membrane interactions and the challenges of constructing models of cell membranes on surfaces with desirable properties, e.g. porosity. Here, we successfully form a two-phase (gel-fluid) lipid bilayer supported by nanoporous silica xerogel. Surface topology, diffusion, and lipid density in comparison to mica-supported lipid bilayers were characterized by AFM, FRAP, FCS, and quantitative fluorescence microscopy, respectively. We found that the two-phase lipid bilayer follows the xerogel surface contours. The corrugation imparted on the lipid bilayer results in a lipid density that is twice that on a flat mica surface. In direct agreement with the doubling of actual bilayer area in a projected area, we find that the lateral diffusion coefficient (D) of lipids on xerogel ({approx}1.7 {micro}m{sup 2}/s) is predictably lower than on mica ({approx}4.1 {micro}m{sup 2}/s) by both FRAP and FCS techniques. Furthermore, the gel-phase domains on xerogel compared to mica were larger and less numerous. Overall, our results suggest the presence of a relatively defect-free continuous two-phase bilayer that penetrates approximately midway into the first layer of {approx}50 nm xerogel beads.

  19. Inkjet printing of UHF antennas on corrugated cardboards for packaging applications

    Science.gov (United States)

    Sowade, Enrico; Göthel, Frank; Zichner, Ralf; Baumann, Reinhard R.

    2015-03-01

    In this study, a method based on inkjet printing has been established to develop UHF antennas on a corrugated cardboard for packaging applications. The use of such a standardized, paper-based packaging substrate as material for printing electronics is challenging in terms of its high surface roughness and high ink absorption rate, especially when depositing very thin films with inkjet printing technology. However, we could obtain well-defined silver layers on the cardboard substrates due to a primer layer approach. The primer layer is based on a UV-curable ink formulation and deposited as well as the silver ink with inkjet printing technology. Industrial relevant printheads were chosen for the deposition of the materials. The usage of inkjet printing allows highest flexibility in terms of pattern design. The primer layer was proven to optimize the surface characteristics of the substrate, mainly reducing the surface roughness and water absorptiveness. Thanks to the primer layer approach, ultra-high-frequency (UHF) radio-frequency identification (RFID) antennas were deposited by inkjet printing on the corrugated cardboards. Along with the characterization and interpretation of electrical properties of the established conductive antenna patterns, the performance of the printed antennas were analyzed in detail by measuring the scattering parameter S11 and the antenna gain.

  20. Inkjet printing of UHF antennas on corrugated cardboards for packaging applications

    Energy Technology Data Exchange (ETDEWEB)

    Sowade, Enrico, E-mail: enrico.sowade@mb.tu-chemnitz.de [Digital Printing and Imaging Technology, Technische Universität Chemnitz, Chemnitz (Germany); Göthel, Frank [Digital Printing and Imaging Technology, Technische Universität Chemnitz, Chemnitz (Germany); Zichner, Ralf [Department Printed Functionalities, Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz (Germany); Baumann, Reinhard R. [Digital Printing and Imaging Technology, Technische Universität Chemnitz, Chemnitz (Germany); Department Printed Functionalities, Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz (Germany)

    2015-03-30

    Highlights: • Inkjet printing of UHF antennas on cardboard substrates. • Development of primer layer to compensate the absorptiveness of the cardboard and the rough surface. • Manufacturing of UHF antennas in a fully digital manner for packaging applications. - Abstract: In this study, a method based on inkjet printing has been established to develop UHF antennas on a corrugated cardboard for packaging applications. The use of such a standardized, paper-based packaging substrate as material for printing electronics is challenging in terms of its high surface roughness and high ink absorption rate, especially when depositing very thin films with inkjet printing technology. However, we could obtain well-defined silver layers on the cardboard substrates due to a primer layer approach. The primer layer is based on a UV-curable ink formulation and deposited as well as the silver ink with inkjet printing technology. Industrial relevant printheads were chosen for the deposition of the materials. The usage of inkjet printing allows highest flexibility in terms of pattern design. The primer layer was proven to optimize the surface characteristics of the substrate, mainly reducing the surface roughness and water absorptiveness. Thanks to the primer layer approach, ultra-high-frequency (UHF) radio-frequency identification (RFID) antennas were deposited by inkjet printing on the corrugated cardboards. Along with the characterization and interpretation of electrical properties of the established conductive antenna patterns, the performance of the printed antennas were analyzed in detail by measuring the scattering parameter S{sub 11} and the antenna gain.

  1. Energy corrugation in atomic-scale friction on graphite revisited by molecular dynamics simulations

    Science.gov (United States)

    Sun, Xiao-Yu; Qi, Yi-Zhou; Ouyang, Wengen; Feng, Xi-Qiao; Li, Qunyang

    2016-08-01

    Although atomic stick-slip friction has been extensively studied since its first demonstration on graphite, the physical understanding of this dissipation-dominated phenomenon is still very limited. In this work, we perform molecular dynamics (MD) simulations to study the frictional behavior of a diamond tip sliding over a graphite surface. In contrast to the common wisdom, our MD results suggest that the energy barrier associated lateral sliding (known as energy corrugation) comes not only from interaction between the tip and the top layer of graphite but also from interactions among the deformed atomic layers of graphite. Due to the competition of these two subentries, friction on graphite can be tuned by controlling the relative adhesion of different interfaces. For relatively low tip-graphite adhesion, friction behaves normally and increases with increasing normal load. However, for relatively high tip-graphite adhesion, friction increases unusually with decreasing normal load leading to an effectively negative coefficient of friction, which is consistent with the recent experimental observations on chemically modified graphite. Our results provide a new insight into the physical origins of energy corrugation in atomic scale friction.

  2. Transmission Loss and Absorption of Corrugated Core Sandwich Panels With Embedded Resonators

    Science.gov (United States)

    Allen, Albert R.; Schiller, Noah H.; Zalewski, Bart F.; Rosenthal, Bruce N.

    2014-01-01

    The effect of embedded resonators on the diffuse field sound transmission loss and absorption of composite corrugated core sandwich panels has been evaluated experimentally. Two 1.219 m × 2.438 m panels with embedded resonator arrangements targeting frequencies near 100 Hz were evaluated using non-standard processing of ASTM E90-09 acoustic transmission loss and ASTM C423-09a room absorption test measurements. Each panel is comprised of two composite face sheets sandwiching a corrugated core with a trapezoidal cross section. When inlet openings are introduced in one face sheet, the chambers within the core can be used as embedded acoustic resonators. Changes to the inlet and chamber partition locations allow this type of structure to be tuned for targeted spectrum passive noise control. Because the core chambers are aligned with the plane of the panel, the resonators can be tuned for low frequencies without compromising the sandwich panel construction, which is typically sized to meet static load requirements. Absorption and transmission loss performance improvements attributed to opening the inlets were apparent for some configurations and inconclusive for others.

  3. A concave photonic crystal waveguide with a corrugated surface for high-quality focusing

    Institute of Scientific and Technical Information of China (English)

    Hong Wu; Liyong Jiang; Haipeng Li; Wei Jia; Gaige Zheng; Haixia Qiang; Xiangyin Li

    2011-01-01

    @@ A concave two-dimensional (2D) photonic crystal waveguide (PCW) with corrugated surface is theoretically used as a focusing structure. To design this structure, a genetic algorithm is combined with the finite-difference time-domain method. For PCWs with different degrees of concaveness, the power reaches about 80% at different focusing points when the morphology of the concave surface is optimized. More importantly, the focusing location is easily controlled by changing the location of the detector placed in the output field.%A concave two-dimensional (2D) photonic crystal waveguide (PCW) with corrugated surface is theoretically used as a focusing structure. To design this structure, a genetic algorithm is combined with the finite-difference time-domain method. For PCWs with different degrees of concaveness, the power reaches about 80% at different focusing points when the morphology of the concave surface is optimized. More importantly, the focusing location is easily controlled by changing the location of the detector placed in the output field.

  4. Removal of VOCs from air stream with corrugated sheet as adsorbent

    Directory of Open Access Journals (Sweden)

    Rabia Arshad

    2016-10-01

    Full Text Available A large proportional of volatile organic compounds (VOCs are released into the environment from various industrial processes. The current study elucidates an application of a simple adsorption phenomenon for removal of three main types of VOCs, i.e., benzene, xylene and toluene, from an air stream. Two kinds of adsorbents namely acid digested adsorbent and activated carbon are prepared to assess the removal efficiency of each adsorbent in the indoor workplace environment. The results illustrate that the adsorbents prepared from corrugated sheets were remarkably effective for the removal of each pollutant type. Nevertheless, activated carbon showed high potential of adsorbing the targeted VOC compared to the acid digested adsorbent. The uptake by the adsorbents was in the following order: benzene > xylene > toluene. Moreover, maximum adsorption of benzene, toluene and xylene occurred at 20 °C and 1.5 cm/s for both adsorbents whereas minimum success was attained at 30 °C and 1.0 cm/s. However, adsorption pattern are found to be similar for each of the the three aromatic hydrocarbons. It is concluded that the corrugated sheets waste can be a considered as a successful and cost-effective solution towards effective removal of targeted pollutants in the air stream.

  5. High-Power Tunable Laser Pulse Driven Terahertz Generation in Corrugated Plasma Waveguides

    Science.gov (United States)

    Miao, Chenlong; Palastro, John; Antonsen, Thomas

    2016-10-01

    Excitation of terahertz radiation by the interaction of an ultra-short laser pulse and the fields of a miniature, corrugated plasma waveguide is considered. Plasma structures of this type have been realized experimentally and they can support electromagnetic (EM) channel modes with properties that allow for radiation generation. In particular, the mode have subluminal field components, thus allowing phase matching between the generated THz modes and the ponderomotive potential of the laser pulse. Theoretical analysis and full format PIC simulations are conducted. We find THz generated by this slow wave phase matching mechanism is characterized by lateral emission and a coherent, narrow band, tunable spectrum with relatively high power and conversion efficiency. We investigated two different types of channels, and a range of realistic laser pulses and plasma profile parameters are considered with the goal of increasing the conversion of optical energy to THz radiation. We find high laser intensities strongly modify the THz spectrum by exciting higher order channel modes. Enhancement of a specific channel mode can be realized by using an optimum pulse duration and plasma density. As an example, a fixed drive pulse (0.55 J) with spot size of 15 µm and pulse duration of 15 fs excites 37.8 mJ of THz radiation in a 1.5 cm corrugated plasma waveguide with on axis average density of 1.4×1018cm-3, conversion efficiency exceeding 8% is achieved.

  6. PPOOLEX experiments with two parallel blowdown pipes

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-01-15

    This report summarizes the results of the experiments with two transparent blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through either one or two vertical transparent blowdown pipes to the condensation pool. Five experiments with one pipe and six with two parallel pipes were carried out. The main purpose of the experiments was to study loads caused by chugging (rapid condensation) while steam is discharged into the condensation pool filled with sub-cooled water. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. In the experiments the initial temperature of the condensation pool water varied from 12 deg. C to 55 deg. C, the steam flow rate from 40 g/s to 1 300 g/s and the temperature of incoming steam from 120 deg. C to 185 deg. C. In the experiments with only one transparent blowdown pipe chugging phenomenon didn't occur as intensified as in the preceding experiments carried out with a DN200 stainless steel pipe. With the steel blowdown pipe even 10 times higher pressure pulses were registered inside the pipe. Meanwhile, loads registered in the pool didn't indicate significant differences between the steel and polycarbonate pipe experiments. In the experiments with two transparent blowdown pipes, the steamwater interface moved almost synchronously up and down inside both pipes. Chugging was stronger than in the one pipe experiments and even two times higher loads were measured inside the pipes. The loads at the blowdown pipe outlet were approximately the same as in the one pipe cases. Other registered loads around the pool were about 50-100 % higher than with one pipe. The experiments with two parallel blowdown pipes gave contradictory results compared to the earlier studies dealing with chugging loads in case of multiple pipes. Contributing

  7. This is not a Pipe

    DEFF Research Database (Denmark)

    Just, Sine Nørholm

    2016-01-01

    or unwilling to listen to, let alone engage with, emotionally guided bottom-up participation. Using an illustrative case of a Danish public debate over an alleged ban on liquorice pipes, this article argues that the disconnect between invitation and participation may be explained by the fact...

  8. Investigation of sand in piping

    Directory of Open Access Journals (Sweden)

    Nađ Laslo

    2012-01-01

    Full Text Available For the investigation of the grain size distribution of the material washed out from the piping, we used 20 samples originating from different places on the Danube and the Tisza rivers. The grading characteristics of these samples were investigated based on selected grain sizes and the uniformity of gradients. Based on the investigations it has become possible to identify which grain size fractions are likely to be washed out, and how to characterize those fractions. Based on the grain size distribution curves it has been made possible to define the boundaries of the zone susceptible to piping. The zone limits of granular soils liquefied by earthquakes and the zone limits of the soil out washed from piping are very similar. This apparent correspondence already formerly raised the hypothetic question of whether piping occurring during high flood can be simulated by shape to similar surface liquefaction phenomena experienced during earthquakes, as in both cases a volcanic cone is formed through the crater of which water is constantly issuing, dragging away solid particles.

  9. Localized turbulence in pipe flow

    NARCIS (Netherlands)

    Kuik, D.J.

    2011-01-01

    In this thesis the transition to turbulence in pipe flow is investigated. At low Reynolds numbers, the flow returns to the laminar state spontaneously. At high Reynolds number a small perturbation causes the flow to suddenly become turbulent. In the intermediate regime localized turbulence is observ

  10. Methods for Analyzing Pipe Networks

    DEFF Research Database (Denmark)

    Nielsen, Hans Bruun

    1989-01-01

    to formulate the flow equations in terms of pipe discharges than in terms of energy heads. The behavior of some iterative methods is compared in the initial phase with large errors. It is explained why the linear theory method oscillates when the iteration gets close to the solution, and it is further...

  11. Spinning pipe gas lens revisited

    CSIR Research Space (South Africa)

    Mafusire, C

    2008-01-01

    Full Text Available The graded index (GRIN-like) medium generated by gas inside a heated steel pipe when rotated about its longitudinal axis has the ability to focus a laser beam. While the effective focal length of such a system has previously been studied...

  12. Efficient methods of piping cleaning

    Directory of Open Access Journals (Sweden)

    Orlov Vladimir Aleksandrovich

    2014-01-01

    Full Text Available The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of drainage pipes. The co-authors emphasize that the use of ice compared to other methods of pipe cleaning has a number of advantages due to the relative simplicity and cheapness of the process, economical efficiency and lack of environmental risk. The equipment for performing ice cleaning is presented, its technological options, terms of cleansing operations, as well as the volumes of disposed pollution per unit length of the water supply and drainage pipelines. It is noted that ice cleaning requires careful planning in the process of cooking ice and in the process of its supply in the pipe. There are specific requirements to its quality. In particular, when you clean drinking water system the ice applied should be hygienically clean and meet sanitary requirements.In pilot projects, in particular, quantitative and qualitative analysis of sediments adsorbed by ice is conducted, as well as temperature and the duration of the process. The degree of pollution of the pipeline was estimated by the volume of the remote sediment on 1 km of pipeline. Cleaning pipelines using ice can be considered one of the methods of trenchless technologies, being a significant alternative to traditional methods of cleaning the pipes. The method can be applied in urban pipeline systems of drinking water supply for the diameters of 100—600 mm, and also to diversion collectors. In the world today 450 km of pipelines are subject to ice cleaning method.Ice cleaning method is simple

  13. Preliminary Design of IHTS Piping Support for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nak-Hyun; Koo, Gyeong-Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A pipe support is a designed element that transfer the load from pipe to the supporting structures. Providing sufficient pipe wall thickness and installing proper supports are most important elements for structural integrity of the piping system. Piping supports are generally referred to as device used in supporting the weight of the piping. The weight includes that of the pipe proper, the content the pipe carries, and the pipe converting, such as insulation. A FE analysis was performed to select variable spring hanger of IHTS hot-leg piping for PGSFR. The calculated values will be used to design variable spring hanger.

  14. Calculation of Elastic Modulus of Corrugated Laminated Paper for Four-ply Corrugated Board%4层瓦楞纸板复合瓦楞纸弹性模量的计算

    Institute of Scientific and Technical Information of China (English)

    任艳玲; 卢立新

    2012-01-01

    应用复合材料细观力学分析方法,推导了4层瓦楞纸板的复合瓦楞纸的弹性模量。考虑2层瓦楞原纸间粘合剂的影响,分析了复合瓦楞纸纵向弹性模量与粘合剂体积分数及其纵向弹性模量的关系,并用实验进行了验证。为4层瓦楞纸板进一步的相关理论分析奠定基础。%Elastic modulus of corrugated laminated paper for four-ply corrugated board was deduced based on micromechanics analysis of composite material.Considering the effect of adhesive between two layers of base paper,the relationship between corrugated laminated paper's longitudinal elastic modulus and volume fraction as well as of the adhesive was analyzed.Verification experiments were carried out.The purpose was to provide reference for further theoretical analysis of four-ply corrugated paperboard.

  15. Underground pipe inspection device and method

    Science.gov (United States)

    Germata, Daniel Thomas [Wadsworth, IL

    2009-02-24

    A method and apparatus for inspecting the walls of an underground pipe from inside the pipe in which an inspection apparatus having a circular planar platform having a plurality of lever arms having one end pivotably attached to one side of the platform, having a pipe inspection device connected to an opposite end, and having a system for pivoting the lever arms is inserted into the underground pipe, with the inspection apparatus oriented with the planar platform disposed perpendicular to the pipe axis. The plurality of lever arms are pivoted toward the inside wall of the pipe, contacting the inside wall with each inspection device as the apparatus is conveyed along a length of the underground pipe.

  16. 77 FR 67400 - RG Steel Wheeling, LLC, a Division of RG Steel, LLC, Doing Business as Wheeling Corrugating...

    Science.gov (United States)

    2012-11-09

    ... Employment and Training Administration RG Steel Wheeling, LLC, a Division of RG Steel, LLC, Doing Business as..., 2012, applicable to workers of RG Steel Wheeling, LLC, a division of RG Steel, LLC, doing business as... RG Steel, LLC, doing business as Wheeling Corrugating Company, Beech Bottom, West Virginia,...

  17. Enhanced photoluminescence of corrugated Al2O3 film assisted by colloidal CdSe quantum dots.

    Science.gov (United States)

    Bai, Zhongchen; Hao, Licai; Zhang, Zhengping; Huang, Zhaoling; Qin, Shuijie

    2017-05-19

    We present the enhanced photoluminescence (PL) of a corrugated Al2O3 film enabled by colloidal CdSe quantum dots. The colloidal CdSe quantum dots are fabricated directly on a corrugated Al2O3 substrate using an electrochemical deposition (ECD) method in a microfluidic system. The photoluminescence is excited by using a 150 nm diameter ultraviolet laser spot of a scanning near-field optical microscope. Owing to the electron transfer from the conduction band of the CdSe quantum dots to that of Al2O3, the enhanced photoluminescence effect is observed, which results from the increase in the recombination rate of electrons and holes on the Al2O3 surface and the reduction in the fluorescence of the CdSe quantum dots. A periodically-fluctuating fluorescent spectrum was exhibited because of the periodical wire-like corrugated Al2O3 surface serving as an optical grating. The spectral topographic map around the fluorescence peak from the Al2O3 areas covered with CdSe quantum dots was unique and attributed to the uniform deposition of CdSe QDs on the corrugated Al2O3 surface. We believe that the microfluidic ECD system and the surface enhanced fluorescence method described in this paper have potential applications in forming uniform optoelectronic films of colloidal quantum dots with controllable QD spacing and in boosting the fluorescent efficiency of weak PL devices.

  18. “Cold” dispersion relation of corrugated waveguide filled with plasma immersed in a finite magnetic field

    Institute of Scientific and Technical Information of China (English)

    LiWei; WeiYan-Yu; XieHong-Quan; LiuSheng-Gang; GongMa-Li

    2003-01-01

    A general dispersion equation of a partially filled plasma corrugated waveguide immersed in a finite magnetic field is presented.When the guiding magnet B0→∞ or 0, this equation can be reduced to the results obtained in previous works.

  19. 高压旋喷注浆法在处理涵洞地基中的应用%High pressure jet grouting method in treatment of culvert application foundation

    Institute of Scientific and Technical Information of China (English)

    李世波

    2013-01-01

      结合朔黄铁路扩能改造K132+808.5段钢筋混凝土盖板箱涵中的地基处理工程,详细介绍高压旋喷注浆法在处理涵洞地基中的施工特点与加固效果,包括桩的平面布置、水泥浆配制、注浆量及注浆压力、施工工艺与现场检测效果评价等.结果表明,采用高压旋喷注浆法处理涵洞软土地基可操作性强、加固效果且经济性良好,可为今后相似工程中的涵洞地基处理提供实际参考与施工依据.%In connection with the foundation treatment engineering of reinforced concrete cover plate culvert in the capacity expansion and revamp of K132+808.5 section of Shuo-Huang Railway, this paper expounds the characteristics and reinforcement effect of the high pressure jet grouting method in treatment of culvert foundation, including the pile layout, making up of cement slurry, quantity and pressure of grouting, construction process and effect evaluation of on-site examination and so on. Results show that the high pressure jet grouting method has stronger operability, nicer reinforcement effect and economic efficiency in the treatment of soft soil foundation of a culvert, which offers real referential values and construction bases for foundation treatment in a culvert in similar projects.

  20. Radial Corrugations of Multi-Walled Carbon Nanotubes Driven by Inter-Wall Nonbonding Interactions.

    Science.gov (United States)

    Huang, Xu; Liang, Wentao; Zhang, Sulin

    2011-12-01

    We perform large-scale quasi-continuum simulations to determine the stable cross-sectional configurations of free-standing multi-walled carbon nanotubes (MWCNTs). We show that at an inter-wall spacing larger than the equilibrium distance set by the inter-wall van der Waals (vdW) interactions, the initial circular cross-sections of the MWCNTs are transformed into symmetric polygonal shapes or asymmetric water-drop-like shapes. Our simulations also show that removing several innermost walls causes even more drastic cross-sectional polygonization of the MWCNTs. The predicted cross-sectional configurations agree with prior experimental observations. We attribute the radial corrugations to the compressive stresses induced by the excessive inter-wall vdW energy release of the MWCNTs. The stable cross-sectional configurations provide fundamental guidance to the design of single MWCNT-based devices and shed lights on the mechanical control of electrical properties.

  1. Radial Corrugations of Multi-Walled Carbon Nanotubes Driven by Inter-Wall Nonbonding Interactions

    Directory of Open Access Journals (Sweden)

    Huang Xu

    2011-01-01

    Full Text Available Abstract We perform large-scale quasi-continuum simulations to determine the stable cross-sectional configurations of free-standing multi-walled carbon nanotubes (MWCNTs. We show that at an inter-wall spacing larger than the equilibrium distance set by the inter-wall van der Waals (vdW interactions, the initial circular cross-sections of the MWCNTs are transformed into symmetric polygonal shapes or asymmetric water-drop-like shapes. Our simulations also show that removing several innermost walls causes even more drastic cross-sectional polygonization of the MWCNTs. The predicted cross-sectional configurations agree with prior experimental observations. We attribute the radial corrugations to the compressive stresses induced by the excessive inter-wall vdW energy release of the MWCNTs. The stable cross-sectional configurations provide fundamental guidance to the design of single MWCNT-based devices and shed lights on the mechanical control of electrical properties.

  2. Entropically induced asymmetric passage times of charged tracers across corrugated channels

    Energy Technology Data Exchange (ETDEWEB)

    Malgaretti, Paolo, E-mail: malgaretti@is.mpg.de [Max-Planck-Institut für Intelligente Systeme, Heisenbergstr. 3, D-70569 Stuttgart (Germany); IV Institut für Theoretische Physik, Universität Stuttgart, Pfaffenwaldring 57, D-70569 Stuttgart (Germany); Department de Fisica Fonamental, Universitat de Barcelona, Barcelona (Spain); Pagonabarraga, Ignacio; Miguel Rubi, J. [Department de Fisica Fonamental, Universitat de Barcelona, Barcelona (Spain)

    2016-01-21

    We analyze the diffusion of charged and neutral tracers suspended in an electrolyte embedded in a channel of varying cross section. Making use of systematic approximations, the diffusion equation governing the motion of tracers is mapped into an effective 1D equation describing the dynamics along the longitudinal axis of the channel where its varying-section is encoded as an effective entropic potential. This simplified approach allows us to characterize tracer diffusion under generic confinement by measuring their mean first passage time (MFPT). In particular, we show that the interplay between geometrical confinement and electrostatic interactions strongly affect the MFTP of tracers across corrugated channels hence leading to alternative means to control tracers translocation across charged pores. Finally, our results show that the MFPTs of a charged tracer in opposite directions along an asymmetric channel may differ We expect our results to be relevant for biological as well synthetic devices whose dynamics is controlled by the detection of diluted tracers.

  3. Entropically induced asymmetric passage times of charged tracers across corrugated channels.

    Science.gov (United States)

    Malgaretti, Paolo; Pagonabarraga, Ignacio; Rubi, J Miguel

    2016-01-21

    We analyze the diffusion of charged and neutral tracers suspended in an electrolyte embedded in a channel of varying cross section. Making use of systematic approximations, the diffusion equation governing the motion of tracers is mapped into an effective 1D equation describing the dynamics along the longitudinal axis of the channel where its varying-section is encoded as an effective entropic potential. This simplified approach allows us to characterize tracer diffusion under generic confinement by measuring their mean first passage time (MFPT). In particular, we show that the interplay between geometrical confinement and electrostatic interactions strongly affect the MFTP of tracers across corrugated channels hence leading to alternative means to control tracers translocation across charged pores. Finally, our results show that the MFPTs of a charged tracer in opposite directions along an asymmetric channel may differ We expect our results to be relevant for biological as well synthetic devices whose dynamics is controlled by the detection of diluted tracers.

  4. Incremental deformation analysis of shell and corrugated diaphragm based on arbitrary configuration

    Institute of Scientific and Technical Information of China (English)

    Xuefeng He; Jue Zhang; Huijun Chen; Jing Fang

    2005-01-01

    With respect to an arbitrary configuration of a deformed structure, two sets of incremental equations are proposed for the deformation analysis of revolution shells and diaphragms loaded by both lateral pressures and the initial stresses produced in manufacturing. These general equations can be reduced to the simplified Koiter's Reissner-Meissner-Reissner (RMR) equations and the simplified Reissner's equations, when the initial stresses are set to zero.They can also be deduced to the total Lagrange form or the updated Lagrange form, respectively, as the structure is specified as the un-deformed or the former-deformed configurations. These incremental equations can be easily transformed into finite difference forms and solved by common numerical solvers of ordinary differential equations. Some numerical examples are presented to show the applications of the incremental equations to the deep shell of revolution and the corrugated diaphragms used in microelectronical mechanical system (MEMS). The results are in good agreement with those from finite element method (FEM).

  5. Estimation of hydraulic jump on corrugated bed using artificial neural networks and genetic programming

    Institute of Scientific and Technical Information of China (English)

    Akram ABBASPOUR; Davood FARSADIZADEH; Mohammad Ali GHORBANI

    2013-01-01

    Artificial neural networks (ANNs) and genetic programming (GP) have recently been used for the estimation of hydraulic data. In this study, they were used as alternative tools to estimate the characteristics of hydraulic jumps, such as the free surface location and energy dissipation. The dimensionless hydraulic parameters, including jump depth, jump length, and energy dissipation, were determined as functions of the Froude number and the height and length of corrugations. The estimations of the ANN and GP models were found to be in good agreement with the measured data. The results of the ANN model were compared with those of the GP model, showing that the proposed ANN models are much more accurate than the GP models.

  6. Additives for enhancing the drying properties of adhesives for corrugated boards

    Directory of Open Access Journals (Sweden)

    M. Vishnuvarthanan

    2013-03-01

    Full Text Available Adhesives play a fundamental role in many modern technologies, and adhesive failure can have catastrophic consequences. It is, therefore, valuable to understand the factors important for the production of a good durable adhesive bond. The additives are also used to enrich the properties. The objective of this paper is to increase the drying speed of the starch adhesive by adding suitable additives and thereby increasing the production speed of corrugated board manufacturing. The other functional additives that could be incorporated in minor amounts for better drying speed are studied and selected. Their properties such as drying speed, strength, viscosity and pH are tested. The results from the tests are compared and the best additive for fast drying is selected.

  7. Theory of the corrugation instability of a piston-driven shock wave.

    Science.gov (United States)

    Bates, J W

    2015-01-01

    We analyze the two-dimensional stability of a shock wave driven by a steadily moving corrugated piston in an inviscid fluid with an arbitrary equation of state. For h≤-1 or h>h(c), where h is the D'yakov parameter and h(c) is the Kontorovich limit, we find that small perturbations on the shock front are unstable and grow--at first quadratically and later linearly--with time. Such instabilities are associated with nonequilibrium fluid states and imply a nonunique solution to the hydrodynamic equations. The above criteria are consistent with instability limits observed in shock-tube experiments involving ionizing and dissociating gases and may have important implications for driven shocks in laser-fusion, astrophysical, and/or detonation studies.

  8. Modulation of surface plasmon coupling-in by one-dimensional surface corrugation

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Tejeira, F; Rodrigo, Sergio G; Martin-Moreno, L [Departamento de Fisica de la Materia Condensada, Facultad de Ciencas-ICMA, Universidad de Zaragoza-CSIC, E-50009 Zaragoza (Spain); Garcia-Vidal, F J [Departamento de Fisica Teorica de la Materia Condensada, Universidad Autonoma de Madrid, E-28049 Madrid (Spain); Devaux, E; Dintinger, J; Ebbesen, T W [Laboratoire de Nanostructures, ISIS, Universite Louis Pasteur, F-67000 Strasbourg (France); Krenn, J R [Institute of Physics, Karl Franzens University, A-8010 Graz (Austria); Radko, I P; Bozhevolnyi, S I [Department of Physics and Nanotechnology, Aalborg University, DK-9220 Aalborg (Denmark); Gonzalez, M U; Weeber, J C; Dereux, A [Laboratoire de Physique de l' Universite de Bourgogne, UMR CNRS 5027, F-21078 Dijon (France)], E-mail: lmm@unizar.es

    2008-03-15

    Surface plasmon-polaritons have recently attracted renewed interest in the scientific community for their potential in sub-wavelength optics, light generation and non-destructive sensing. Given that they cannot be directly excited by freely propagating light due to their intrinsic binding to the metal surface, the light-plasmon coupling efficiency becomes of crucial importance for the success of any plasmonic device. Here, we present a comprehensive study on the modulation (enhancement or suppression) of such a coupling efficiency by means of one-dimensional surface corrugation. Our approach is based on simple wave interference and enables us to make quantitative predictions which have been experimentally confirmed at both the near-infrared and telecom ranges.

  9. Improved method for computing of light-matter interaction in multilayer corrugated structures.

    Science.gov (United States)

    Korovin, Alexander V

    2008-02-01

    An improved method for the calculation of light-matter interaction that appears with the light propagation through multilayer periodically corrugated structures consisting of any dielectric or absorptive media is reported. The method is based on the differential formalism for a system of Maxwell's equations when the boundary conditions are simplified by the introduction of a curvilinear nonorthogonal coordinate system. The solution for electromagnetic fields was written in the form of the superposition of partial plane waves. The obtained method essentially reduces computation time and increases accuracy compared with the Chandezon method. For a numerical demonstration of the proposed method, calculation of long-range surface plasmon polaritons was performed. The presented method can be enhanced for calculations of light propagation through thin absorptive films with various periodic profiles at both film interfaces.

  10. Formation and transport of granular heaps in vertically vibrated containers with periodic corrugated bottoms

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We report the formation and transportation of granular heaps in vertically vibrated containers with two types of periodic corrugated bottoms:one with a periodic array of ten identical plexiglas rectangles mounted(named the periodic container),and the other with a single-step(named the single-step container).For the periodic container,when the excitation was weaker,several small heaps formed,and the number of them was the same as that of the rectangles on the bottom.As the excitation increased,the system presented three types of states:single well-defined heap,weaker wave,and stronger wave.Some local convections were observed in the interior of heap.For the single-step container,we observed the transpOnatIon of a heap toward step.We propose that the compressive force from the ambient gas plays a crucial role in the movement of the heap.

  11. Similar Rayleigh-Taylor Instability of Shock Fronts Perturbed by Corrugated Interfaces

    Institute of Scientific and Technical Information of China (English)

    HE Yong; HU Xi-Wei; JIANG Zhong-He

    2011-01-01

    @@ Instability of a planar shock front perturbed by a corrugated interface is analyzed,where the perturbation wavelength is along the shock front plane.The presented analysis involves the effects of the features on the shock front,which is different from a general method presented by D'yakov and Kontorovich,where the shock front is taken as an infinitely discontinuity.The growth rate of the instability of the perturbed shock front is obtained and compared with the growth rate of the Rayleigh-Taylor instability(RTI) of an interface,on which the density gradient and the initial conditions are similar to the perturbed shock front.The analysis and comparisons of the growth rate of the instability indicate that the features of the shock front should be considered seriously in the shock interface interactions.%Instability of a planar shock front perturbed by a corrugated interface is analyzed, where the perturbation wavelength is along the shock front plane. The presented analysis involves the effects of the features on the shock front, which is different from a general method presented by D'yakov and Kontorovich, where the shock front is taken as an infinitely discontinuity. The growth rate of the instability of the perturbed shock front is obtained and compared with the growth rate of the Rayleigh-Taylor instability (RTI) of an interface, on which the density gradient and the initial conditions are similar to the perturbed shock front. The analysis and comparisons of the growth rate of the instability indicate that the features of the shock front should be considered seriously in the shock interface interactions.

  12. 46 CFR 154.310 - Cargo piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping systems. 154.310 Section 154.310 Shipping... Arrangements § 154.310 Cargo piping systems. Cargo liquid or vapor piping must: (a) Be separated from other piping systems, except where an interconnection to inert gas or purge piping is required by §...

  13. 46 CFR 154.500 - Cargo and process piping standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo and process piping standards. 154.500 Section 154... Equipment Cargo and Process Piping Systems § 154.500 Cargo and process piping standards. The cargo liquid and vapor piping and process piping systems must meet the requirements in §§ 154.503 through...

  14. 46 CFR 154.522 - Materials for piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Materials for piping. 154.522 Section 154.522 Shipping... Process Piping Systems § 154.522 Materials for piping. (a) The materials for piping systems must meet § 154.625 for the minimum design temperature of the piping, except the material for open ended...

  15. 46 CFR 119.730 - Nonferrous metallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Nonferrous metallic piping materials. 119.730 Section... INSTALLATION Piping Systems § 119.730 Nonferrous metallic piping materials. (a) Nonferrous metallic piping materials are acceptable for use in the following: (1) Non-vital systems; (2) Aluminum fuel piping on...

  16. Piping inspection carriage having axially displaceable sensor

    Science.gov (United States)

    Zollinger, William T.; Treanor, Richard C.

    1994-01-01

    A pipe inspection instrument carriage for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  17. Wave Propagation in Pipe-like Structures

    DEFF Research Database (Denmark)

    Morsbøl, Jonas

    Pipe-like shell structures are found in a wide range of practical applications such as: Wind turbine towers, jet engines, brass instruments, and piping systems. For many of these applications, structural vibrations play an important role for their performance. This thesis will in particular focus...... on how the curvature on a thin-walled pipe, as well as a changing radius along a straight thin-walled pipe, affects the waveguide properties. It shows that the waveguide properties of curved pipes roughly can be divided into three regimes: The curved beam regime, the cylinder regime, and the torus regime....... In the curved beam regime the waveguide properties of the pipe can be approximated by classical curved beam theory while in the cylinder regime they can be approximated by cylindrical shell theory. In the torus regime none of the two other regimes apply, and a full-blown shell model is needed. For the straight...

  18. Lightweight Heat Pipes Made from Magnesium

    Science.gov (United States)

    Rosenfeld, John N.; Zarembo, Sergei N.; Eastman, G. Yale

    2010-01-01

    Magnesium has shown promise as a lighter-weight alternative to the aluminum alloys now used to make the main structural components of axially grooved heat pipes that contain ammonia as the working fluid. Magnesium heat-pipe structures can be fabricated by conventional processes that include extrusion, machining, welding, and bending. The thermal performances of magnesium heat pipes are the same as those of equal-sized aluminum heat pipes. However, by virtue of the lower mass density of magnesium, the magnesium heat pipes weigh 35 percent less. Conceived for use aboard spacecraft, magnesium heat pipes could also be attractive as heat-transfer devices in terrestrial applications in which minimization of weight is sought: examples include radio-communication equipment and laptop computers.

  19. Intermediate Temperature Fluids for Heat Pipes and Loop Heat Pipes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop heat pipe and loop heat pipe (LHP) working fluids for what is known as the intermediate...

  20. Pipes under internal pressure and bending

    CERN Document Server

    Catinaccio, A

    2009-01-01

    This article covers the general behaviour of a straight uniform pipe, with built-in open ends, subject to internal pressure and in plane bending or curvature. It is intended as a summary of the basic equations driving the unintuitive phenomena of bending and instability of pipes under internal pressure. The analysis covers in addition the investigation of opposite pressure stabilisation effects that can be observed in some orthotropic material pipes like composite pressure hoses.

  1. Effect of Glass Reinforced Epoxy (GRE) pipe filled with Geopolymer Materials for Piping Application: Compression Properties

    OpenAIRE

    2016-01-01

    The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were prepared by using the filament winding method. The effect of weight percentage of geopolymer materials in epoxy hardener was studied under mechanical testing, which is using the compression test. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled wi...

  2. Development of bore tools for pipe inspection

    Energy Technology Data Exchange (ETDEWEB)

    Oka, Kiyoshi; Nakahira, Masataka; Taguchi, Kou; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    In the International Thermonuclear Reactor (ITER), replacement and maintenance on in-vessel components requires that all cooling pipes connected be cut and removed, that a new component be installed, and that all cooling pipes be rewelded. After welding is completed, welded area must be inspected for soundness. These tasks require a new work concept for securing shielded area and access from narrow ports. Tools had to be developed for nondestructive inspection and leak testing to evaluate pipe welding soundness by accessing areas from inside pipes using autonomous locomotion welding and cutting tools. A system was proposed for nondestructive inspection of branch pipes and the main pipe after passing through pipe curves, the same as for welding and cutting tool development. Nondestructive inspection and leak testing sensors were developed and the basic parameters were obtained. In addition, the inspection systems which can move inside pipes and conduct the nondestructive inspection and the leak testing were developed. In this paper, an introduction will be given to the current situation concerning the development of nondestructive inspection and leak testing machines for the branch pipes. (author)

  3. Plastic pipe systems failure investigation and diagnosis

    CERN Document Server

    Farshad, Mehdi

    2011-01-01

    Industrial and domestic piping is increasingly made from various plastics and composites, and these materials withstand heavy use over long periods. They are, however, affected by environmental and other factors over time and can degrade, causing major problems within piping systems. Farshad's book deals with why plastic pipes and systems fail, and with how to investigate and diagnose such failures. Pipes may buckle, fracture, change in dimensions and colour, blister and delaminate, corrode through stress, be abraded and obstructed: all these cause problems and lead to loss of efficient operat

  4. Fracture mechanics parameters of multilayer pipes

    Directory of Open Access Journals (Sweden)

    Šestáková L.

    2007-10-01

    Full Text Available Multilayer pipes consisting of different materials are frequently used in praxis because of partial improvement of the properties of pipe systems. To estimate lifetime of these pipes the basic fracture parameters have to be determined. In this work finite element calculations are applied in order to estimate the stress intensity factor K and T-stress values for a new type of non-homogenous C-shape specimen. The application of calculated K and T values to laboratory estimation of fracture toughness and its transferability to real pipe system is discussed.

  5. Water pipe smoking and dermatologic consequences.

    Science.gov (United States)

    Wollina, U

    2015-08-01

    Water pipe smoking is a recently growing addiction worldwide. It has become popular in Africa and the Western World and enfaces a renaissance in Middle East and Asia. The smoking technique leads to a different exposure to potential hazardous compounds compared to cigarette or classical pipe smoking. The common assumption that water pipe smoking is less dangerous to health is not substantiated by scientific data. Non-tobacco-based preparations reduce the exposure to nicotine but may contain equal or even higher concentrations of other toxic compounds. The medical literature on adverse effect of water pipe smoking on skin and oral mucosa is reviewed but future research is a demand.

  6. Location of Agricultural Drainage Pipes and Assessment of Agricultural Drainage Pipe Conditions Using Ground Penetrating Radar

    Science.gov (United States)

    Methods are needed to not only locate buried agricultural drainage pipe, but to also determine if the pipes are functioning properly with respect to water delivery. The primary focus of this research project was to confirm the ability of ground penetrating radar (GPR) to locate buried drainage pipe ...

  7. Investigation into rail corrugation in high-speed railway tracks from the viewpoint of the frictional self-excited vibration of a wheel–rail system

    National Research Council Canada - National Science Library

    Chen, G X; Cui, X L; Qian, W J

    2016-01-01

    A finite element vibration model of a multiple wheel–rail system which consists of four wheels, one rail, and a series of sleepers is established to address the problem of rail corrugation in high-speed tracks...

  8. Investigation into rail corrugation in high-speed railway tracks from the viewpoint of the frictional self-excited vibration of a wheel-raU system

    National Research Council Canada - National Science Library

    G. X. Chen X. L. Cui W. J. Qian

    2016-01-01

    A finite element vibration model of a multiple wheel-rail system which consists of four wheels, one rail, and a series of sleepers is established to address the problem of rail corrugation in high-speed tracks...

  9. Literature review and experimental investigation of heat pipes

    Science.gov (United States)

    Barsch, W. O.; Schoenhals, R. J.; Viskanta, R.; Winter, E. R. F.

    1971-01-01

    Tests on heat pipes determine operational limits, external boundary conditions, noncondensable gas effects, startup behavior, and geometric configurations. Experiment consists of design, construction, and testing of an apparatus for measuring wick properties, conventional heat pipes and coplanar heat pipes.

  10. Heat transfer characteristics of air cross-flow for in-line arrangement of spirally corrugated tube and smooth tube bundles

    Institute of Scientific and Technical Information of China (English)

    LU Guo-dong; ZHOU Qiang-tai; TIAN Mao-cheng; CHENG Lin; YU Xiao-li

    2005-01-01

    An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presented in this paper with transverse and longitudinal tube-pitch and tube geometries taken into account. The experiment's results can provide technical guidelines for application to horizontal air preheater with arranged in-line spirally corrugated tube bundles, especially to the air preheater for CFBCBs (Circulating Fluidized Bed Combustion Boilers).

  11. Heat Pipe with Axial Wick

    Science.gov (United States)

    Ambrose, Jay H. (Inventor); Holmes, Rolland (Inventor)

    2016-01-01

    A heat pipe has an evaporator portion, a condenser portion, and at least one flexible portion that is sealingly coupled between the evaporator portion and the condenser portion. The flexible portion has a flexible tube and a flexible separator plate held in place within the flexible tube so as to divide the flexible tube into a gas-phase passage and a liquid-phase artery. The separator plate and flexible tube are configured such that the flexible portion is flexible in a plane that is perpendicular to the separator plate.

  12. Buckling Characteristics of Cylindrical Pipes

    Institute of Scientific and Technical Information of China (English)

    Toshiaki Sakurai

    2015-01-01

    This paper describes the buckling pattern of the body frame by energy absorbed efficiency of crashworthiness related toresearch of the buckling characteristics of aluminum cylindrical pipes with various diameters formed mechanical tools. Experimentswere performed by the quasi-static test without lubrication between specimen and equipment. According to the change in the radiusversus thickness of the specimen, the buckling phenomena are transformed from folding to bellows and the rate of energy absorptionis understood. In crashworthiness, frames are characterized by the folding among three patterns from the absorbed energy efficiencypoint of view and weight reduction. With the development of new types of transport such as electric vehicles, innovated bodystructure should be designed.

  13. Study on the turbulence model sensitivity for various cross-corrugated surfaces applied to matrix type heat exchanger

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jun Myung; Ha, Man Yeong; Son, Chang Min; Doo, Jeong Hoon; Min, June Kee [Pusan National University, Busan (Korea, Republic of)

    2016-03-15

    Diverse cross-corrugated surface geometries were considered to estimate the sensitivity of four variants of k-ε turbulence models (Low Reynolds, standard, RNG and realizable models). The cross-corrugated surfaces considered in this study are a conventional sinusoidal shape and two different asymmetric shapes. The numerical simulations using the steady incompressible Reynolds-averaged Navier Stokes (RANS) equations were carried out to obtain the steady solutions of the flow and thermal fields in the unitary cell of the heat exchanger matrix. In addition, the experimental test for the measurement of local convective heat transfer coefficients on the heat transfer surfaces was performed by means of the Transient liquid crystal (TLC) technique in order to compare the numerical results with the measured data. The features on detailed flow structure and corresponding heat transfer in the unitary cell of the matrix type heat exchanger are compared and analyzed against four different turbulence models considered in this study.

  14. Corrugations and eccentric spirals in Saturn's D ring: New insights into what happened at Saturn in 1983

    CERN Document Server

    Hedman, M M; Showalter, M R

    2014-01-01

    Previous investigations of Saturn's outer D ring (73,200-74,000 km from Saturn's center) identified periodic brightness variations whose radial wavenumber increased linearly over time. This pattern was attributed to a vertical corrugation, and its temporal variability implied that some event --possibly an impact with interplanetary debris-- caused the ring to become tilted out the planet's equatorial plane in 1983. This work examines these patterns in greater detail using a more extensive set of Cassini images in order to obtain additional insights into the 1983 event. These additional data reveal that the D ring is not only corrugated, but also contains a time-variable periodic modulation in its optical depth that probably represents organized eccentric motions of the D-ring's particles. This second pattern suggests that whatever event tilted the rings also disturbed the radial or azimuthal velocities of the ring particles. Furthermore, the relative amplitudes of the two patterns indicate that the vertical m...

  15. Experimental demonstration of longitudinal beam phase space linearizer in a free-electron laser facility by corrugated structures

    CERN Document Server

    Deng, Haixiao; Feng, Chao; Zhang, Tong; Wang, Xingtao; Lan, Taihe; Feng, Lie; Zhang, Wenyan; Liu, Xiaoqing; Yao, Haifeng; Shen, Lei; Li, Bin; Zhang, Junqiang; Li, Xuan; Fang, Wencheng; Wang, Dan; Couprie, Marie-emmanuelle; Lin, Guoqiang; Liu, Bo; Gu, Qiang; Wang, Dong; Zhao, Zhentang

    2014-01-01

    Removal of residual linear energy chirp and intrinsic nonlinear energy curvature in the relativistic electron beam from radiofrequency linear accelerator is of paramount importance for efficient lasing of a high-gain free-electron laser. Recently, it was theoretically and experimentally demonstrated that the longitudinal wakefield excited by the electrons itself in the corrugated structure allows for precise control of the electron beam phase space. In this Letter, we report the first utilization of a corrugated structure as beam linearizer in the operation of a seeded free-electron laser driven by a 140 MeV linear accelerator, where a gain of ~10,000 over spontaneous emission was achieved at the second harmonic of the 1047 nm seed laser, and a free-electron laser bandwidth narrowing by about 50% was observed, in good agreement with the theoretical expectations.

  16. Analysis of dispersion and absorption characteristics of shear waves in sinusoidally corrugated elastic medium with void pores

    Science.gov (United States)

    Pandit, Deepak Kr.; Kundu, Santimoy; Gupta, Shishir

    2017-02-01

    This theoretical work reports the dispersion and absorption characteristics of horizontally polarized shear wave (SH-wave) in a corrugated medium with void pores sandwiched between two dissimilar half-spaces. The dispersion and absorption equations have been derived in a closed form using the method of separation of variables. It has been established that there are two different kinds of wavefronts propagating in the proposed media. One of the wavefronts depends on the modulus of rigidity of elastic matrix of the medium and satisfies the dispersion equation of SH-waves. The second wavefront depends on the changes in volume fraction of the pores. Numerical computation of the obtained relations has been performed and the results are depicted graphically. The influence of corrugation, sandiness on the phase velocity and the damped velocity of SH-wave has been studied extensively.

  17. The effects of corrugation and wing planform on the aerodynamic force production of sweeping model insect wings

    Institute of Scientific and Technical Information of China (English)

    Guoyu Luo; Mao Sun

    2005-01-01

    The effects of corrugation and wing planform (shape and aspect ratio) on the aerodynamic force production of model insect wings in sweeping (rotating after an initial start) motion at Reynolds number 200 and 3500 at angle of attack 40° are investigated, using the method of computational fluid dynamics. A representative wing corrugation is considered. Wing-shape and aspect ratio (AR) of ten representative insect wings are considered; they are the wings of fruit fly, cranefly, dronefly, hoverfly, ladybird, bumblebee, honeybee, lacewing (forewing), hawkmoth and dragonfly (forewing), respectively (AR of these wings varies greatly,from 2.84 to 5.45). The following facts are shown.(1) The corrugated and flat-plate wings produce approximately the same aerodynamic forces. This is because for a sweeping wing at large angle of attack, the length scale of the corrugation is much smaller than the size of the separated flow region or the size of the leading edge vortex (LEV). (2) The variation in wing shape can have considerable effects on the aerodynamic force; but it has only minor effects on the force coefficients when the velocity at r2 (the radius of the second moment of wing area) is used as the reference velocity; i.e.the force coefficients are almost unaffected by the variation in wing shape. (3) The effects of AR are remarkably small:when AR increases from 2.8 to 5.5, the force coefficients vary only slightly; flowfield results show that when AR is relatively large, the part of the LEV on the outer part of the wings sheds during the sweeping motion. As AR is increased, on one hand,the force coefficients will be increased due to the reduction of 3-dimensional flow effects; on the other hand, they will be decreased due to the shedding of pan of the LEV; these two effects approximately cancel each other, resulting in only minor change of the force coefficients.

  18. INFLUENCE OF PIPE ANGLE ON BEDLOAD TRANSPORT IN AN INCLINED PIPE

    Institute of Scientific and Technical Information of China (English)

    David M. ADMIRAAL

    2003-01-01

    A number of reservoirs in Nebraska have been retrofitted with sediment bypass systems to extend their lifespan. The bypass systems are best suited for rerouting sediment that travels as bedload since bedload is relatively easy to capture at reservoir inlets. Because of their size, the captured sediment particles sometimes travel as bedload in the bypass system as well. Studies have been done to quantify head losses in horizontal pipes with different water and sediment flow rates, and the results have been used to assess the practicality of bypass systems for specific prototypes. However, much less has been done to evaluate the performance of inclined pipes for bypassing sediment. Furthermore, little has been done to understand how bedforms influence head losses in the pipes. In order to better understand the behavior of sediment transport within pipes, an experimental apparatus was constructed to simulate a range of sediment loading rates, water flow rates, and pipe inclination angles. Three pressure taps with a spacing of 1.5 m were installed in the pipe at a location sufficiently downstream from the inlet. One section of the pipe was replaced with an acrylic pipe of equivalent internal diameter so that bedform shapes and sizes could be measured for different flow conditions. For each flow condition, the pressure drop in the pipe and the sediment transport rate are recorded over time. For coarse sediment, the inclination angle ofthe pipe and the sediment transport rate both have a strong influence on flow properties, and, thus, head losses in the pipe.

  19. PE管管材性能探讨%Pipe Performance of PE Pipe

    Institute of Scientific and Technical Information of China (English)

    李子臣

    2011-01-01

    目前中国的塑料管道正在稳步发展,其中PE管强劲的发展势头最为令人瞩目.PE管的使用领域广泛,其中给水管和燃气管是其两个最大的应用市场.本文简单阐述了PE管的组成成分,对比分析了PE管的性能,最后论述了PE管的用途.%At present, China's plastic pipe is steadily developing, and strong momentum of development of the PE pipe is the most remarkable. PE pipe has a wide use, in which water pipe and gas pipe are two largest markets for application. This paper briefly describes the composition of PE pipe, makes comparative analysis of its performance, and finally discusses the use of PE pipe.

  20. 49 CFR 230.62 - Dry pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Dry pipe. 230.62 Section 230.62 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Pipes §...

  1. Technical Study of Slotted Pipe Working

    Institute of Scientific and Technical Information of China (English)

    Yang Helai; Su Feng

    1996-01-01

    @@ Introduction Slotted pipe is a kind of tool used in the oilfield for drilling wells to proof sand. There are many difficulties in working out several thousands seams which are about 0.3mm to 0.6 mm wide on a 10 meter long alloy steel pipe,and the types are various, such as straight and trapezoid.

  2. Heat-pipe thermionic reactor concept

    DEFF Research Database (Denmark)

    Storm Pedersen, E.

    1967-01-01

    Main components are reactor core, heat pipe, thermionic converter, secondary cooling system, and waste heat radiator; thermal power generated in reactor core is transported by heat pipes to thermionic converters located outside reactor core behind radiation shield; thermionic emitters are in direct...

  3. Updating piping probabilities with survived historical loads

    NARCIS (Netherlands)

    Schweckendiek, T.; Kanning, W.

    2009-01-01

    Piping, also called under-seepage, is an internal erosion mechanism, which can cause the failure of dikes or other flood defence structures. The uncertainty in the resistance of a flood defence against piping is usually large, causing high probabilities of failure for this mechanism. A considerable

  4. 75 FR 877 - Drill Pipe From China

    Science.gov (United States)

    2010-01-06

    ... COMMISSION Drill Pipe From China AGENCY: International Trade Commission. ACTION: Institution of antidumping... States is materially retarded, by reason of imports from China of drill pipe, provided for in subheadings... Government of China. Unless the Department of Commerce extends the time for initiation pursuant to...

  5. Heat pipe thermosyphon heat performance calculation

    Science.gov (United States)

    Novomestský, Marcel; Kapjor, Andrej; Papučík, Štefan; Siažik, Ján

    2016-06-01

    In this article the heat performance of the heat pipe thermosiphon is achieved through numerical model. The heat performance is calculated from few simplified equations which depends on the working fluid and geometry. Also the thermal conductivity is good to mentioning, because is really interesting how big differences are between heat pipes and full solid surfaces.

  6. Energy Industry:Hunger for Steel Pipe?

    Institute of Scientific and Technical Information of China (English)

    Berry Chen

    2009-01-01

    @@ After the ups and downs of Chinese steel pipe market in 2008, industry structure changes are taking place quietly. Some enterprises with high-end oil and natural gas pipes and high-pressure boiler tubes have not been much offected in this storm, and won good market demand, while others with low-end products have been eliminated.

  7. DEPOSITION OF PARTICLES IN TURBULENT PIPE FLOW

    Institute of Scientific and Technical Information of China (English)

    Xiaowei Luo; Suyuan Yu

    2006-01-01

    The deposition of particles in turbulent pipe flow was investigated in terms of two mechanisms, turbulent and thermophoretic. A general equation incorporating these two mechanisms was formulated to calculate the deposition efficiency of aerosol particles in turbulent pipe flow together with thermophoretic deposition. The validity of the equation was confirmed by good agreement between calculated and measured results.

  8. Water driven turbine/brush pipe cleaner

    Science.gov (United States)

    Werlink, Rudy J. (Inventor)

    1995-01-01

    Assemblies are disclosed for cleaning the inside walls of pipes and tubes. A first embodiment includes a small turbine with angled blades axially mounted on one end of a standoff support. An O-ring for stabilizing the assembly within the pipe is mounted in a groove within the outer ring. A replaceable circular brush is fixedly mounted on the opposite end of the standoff support and can be used for cleaning tubes and pipes of various diameters, lengths and configurations. The turbine, standoff support, and brush spin in unison relative to a hub bearing that is fixedly attached to a wire upstream of the assembly. The nonrotating wire is for retaining the assembly in tension and enabling return of the assembly to the pipe entrance. The assembly is initially placed in the pipe or tube to be cleaned. A pressurized water or solution source is provided at a required flow-rate to propel the assembly through the pipe or tube. The upstream water pressure propels and spins the turbine, standoff support and brush. The rotating brush combined with the solution cleans the inside of the pipe. The solution flows out of the other end of the pipe with the brush rotation controlled by the flow-rate. A second embodiment is similar to the first embodiment but instead includes a circular shaped brush with ring backing mounted in the groove of the exterior ring of the turbine, and also reduces the size of the standoff support or eliminates the standoff support.

  9. Geothermal drill pipe corrosion test plan

    Energy Technology Data Exchange (ETDEWEB)

    Caskey, B.C.; Copass, K.S.

    1980-12-01

    Plans are presented for conducting a field test of drill pipe corrosion, comparing air and nitrogen as drilling fluids. This test will provide data for evaluating the potential of reducing geothermal well drilling costs by extending drill pipe life and reducing corrosion control costs. The 10-day test will take place during fall 1980 at the Baca Location in Sandoval County, New Mexico.

  10. Non-contact gears: I. Next-to-leading order contribution to lateral Casimir force between corrugated parallel plates

    CERN Document Server

    Cavero-Pelaez, Ines; Parashar, Prachi; Shajesh, K V

    2008-01-01

    We calculate the lateral Casimir force between corrugated parallel plates, described by $\\delta$-function potentials, interacting through a scalar field, using the multiple scattering formalism. The contributions to the Casimir energy due to uncorrugated parallel plates is treated as a background from the outset. We derive the leading- and next-to-leading-order contribution to the lateral Casimir force for the case when the corrugation amplitudes are small in comparison to corrugation wavelengths. We present explicit results in terms of finite integrals for the case of the Dirichlet limit, and exact results for the weak-coupling limit, for the leading- and next-to-leading-orders. The correction due to the next-to-leading contribution is significant. In the weak coupling limit we calculate the lateral Casimir force exactly in terms of a single integral which we evaluate numerically. Exact results for the case of the weak limit allows us to estimate the error in the perturbative results. We show that the error ...

  11. Trend extraction of rail corrugation measured dynamically based on the relevant low-frequency principal components reconstruction

    Science.gov (United States)

    Li, Yanfu; Liu, Hongli; Ma, Ziji

    2016-10-01

    Rail corrugation dynamic measurement techniques are critical to guarantee transport security and guide rail maintenance. During the inspection process, low-frequency trends caused by rail fluctuation are usually superimposed on rail corrugation and seriously affect the assessment of rail maintenance quality. In order to extract and remove the nonlinear and non-stationary trends from original mixed signals, a hybrid model based ensemble empirical mode decomposition (EEMD) and modified principal component analysis (MPCA) is proposed in this paper. Compared with the existing de-trending methods based on EMD, this method first considers low-frequency intrinsic mode functions (IMFs) thought to be underlying trend components that maybe contain some unrelated components, such as white noise and low-frequency signal itself, and proposes to use PCA to accurately extract the pure trends from the IMFs containing multiple components. On the other hand, due to the energy contribution ratio between trends and mixed signals is prior unknown, and the principal components (PCs) decomposed by PCA are arranged in order of energy reduction without considering frequency distribution, the proposed method modifies traditional PCA and just selects relevant low-frequency PCs to reconstruct the trends based on the zero-crossing numbers (ZCN) of each PC. Extensive tests are presented to illustrate the effectiveness of the proposed method. The results show the proposed EEMD-PCA-ZCN is an effective tool for trend extraction of rail corrugation measured dynamically.

  12. Inspection technology for high pressure pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H

    2000-02-01

    Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

  13. IPIRG programs - advances in pipe fracture technology

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Olson, R.; Scott, P. [Batelle, Columbus, OH (United States)

    1997-04-01

    This paper presents an overview of the advances made in fracture control technology as a result of the research performed in the International Piping Integrity Research Group (IPIRG) program. The findings from numerous experiments and supporting analyses conducted to investigate the behavior of circumferentially flawed piping and pipe systems subjected to high-rate loading typical of seismic events are summarized. Topics to be discussed include; (1) Seismic loading effects on material properties, (2) Piping system behavior under seismic loads, (3) Advances in elbow fracture evaluations, and (4) {open_quotes}Real{close_quotes} piping system response. The presentation for each topic will be illustrated with data and analytical results. In each case, the state-of-the-art in fracture mechanics prior to the first IPIRG program will be contrasted with the state-of-the-art at the completion of the IPIRG-2 program.

  14. Sensitivity of Internal Wave Energy Distribution over Seabed Corrugations to Adjacent Seabed Features

    CERN Document Server

    Karimpour, F; Alam, M -R

    2016-01-01

    Here we show that the distribution of internal gravity waves energy over a patch of seabed corrugations strongly depends on the "distance" of the patch to adjacent seafloor features. Specifically, we consider the energy distribution over a patch of seabed ripples neighbored to i. another patch of ripples, and ii. a vertical wall. Seabed undulations with dominant wavenumber twice as large as overpassing internal waves reflect back part of the energy of the internal waves (Bragg reflection), let the rest of the energy to transmit or to be transferred to higher and lower modes. In the presence of a neighboring topography on the downstream side, the transmitted energy from the patch may reflect back, e.g. partially if the downstream topography is another set of seabed ripples, or fully if it is a vertical wall. The reflected wave from downstream topography is again reflected back by the patch of ripples through the same mechanism. This consecutive reflection goes on indefinitely leading to a complex interaction p...

  15. Corrugated paraffin nanocomposite films as large stroke thermal actuators and self-activating thermal interfaces.

    Science.gov (United States)

    Copic, Davor; Hart, A John

    2015-04-22

    High performance active materials are of rapidly growing interest for applications including soft robotics, microfluidic systems, and morphing composites. In particular, paraffin wax has been used to actuate miniature pumps, solenoid valves, and composite fibers, yet its deployment is typically limited by the need for external volume constraint. We demonstrate that compact, high-performance paraffin actuators can be made by confining paraffin within vertically aligned carbon nanotube (CNT) films. This large-stroke vertical actuation is enabled by strong capillary interaction between paraffin and CNTs and by engineering the CNT morphology by mechanical compression before capillary-driven infiltration of the molten paraffin. The maximum actuation strain of the corrugated CNT-paraffin films (∼0.02-0.2) is comparable to natural muscle, yet the maximum stress is limited to ∼10 kPa by collapse of the CNT network. We also show how a CNT-paraffin film can serve as a self-activating thermal interface that closes a gap when it is heated. These new CNT-paraffin film actuators could be produced by large-area CNT growth, infiltration, and lamination methods, and are attractive for use in miniature systems due to their self-contained design.

  16. Contact angle hysteresis and meniscus corrugation on randomly heterogeneous surfaces with mesa-type defects.

    Science.gov (United States)

    Iliev, Dimitar; Pesheva, Nina; Iliev, Stanimir

    2013-05-14

    The results of a numerical study of the various characteristics of the static contact of a liquid meniscus with a flat but heterogeneous surface, consisting of two types of homogeneous materials, forming regularly and randomly distributed microscopic defects are presented. The solutions for the meniscus shape are obtained numerically using the full expression of the system free energy functional. The goal is to establish how the magnitude and the limits of the hysteresis interval of the equilibrium contact angle, the Cassie's angle, and the contact line (CL) roughness exponent are related to the parameters, characterizing the heterogeneous surface-the equilibrium contact angles on the two materials and their fractions. We compare the results of different ways of determining the averaged contact angle on heterogeneous surfaces. We study the spread of the CL corrugation along the liquid meniscus. We compare our results with the numerical results, obtained using linearized energy functional, and also with experimental results for the CL roughness exponent. The obtained results support the conclusion that some characteristics depends on the type (regular or random) of the heterogeneity pattern.

  17. Mechanisms of amplification of ultrashort electromagnetic pulses in gyrotron traveling wave tube with helically corrugated waveguide

    Science.gov (United States)

    Ginzburg, N. S.; Zotova, I. V.; Sergeev, A. S.; Zaslavsky, V. Yu.; Zheleznov, I. V.; Samsonov, S. V.; Mishakin, S. V.

    2015-11-01

    A time-domain self consistent theory of a gyrotron traveling wave tube with a helically corrugated operating waveguide has been developed. Based on this model, the process of short pulse amplification was studied in regimes of grazing and intersection of the dispersion curves of the electromagnetic wave and the electron beam. In the first case, the possibility of amplification without pulse form distortion was demonstrated for the pulse spectrum width of the order of the gain bandwidth. In the second case, when the electrons' axial velocity was smaller than the wave's group velocity, it was shown that the slippage of the incident signal with respect to the electron beam provides feeding of the signal by "fresh" electrons without initial modulation. As a result, the amplitude of the output pulse can exceed the amplitude of its saturated value for the case of the grazing regime, and, for optimal parameters, the peak output power can be even larger than the kinetic power of the electron beam.

  18. Corrugated velocity patterns in the spiral galaxies: NGC 278, NGC 1058, NGC 2500 \\& UGC 3574

    CERN Document Server

    Sánchez-Gil, M Carmen; Pérez, Enrique

    2015-01-01

    We address the study of the \\Ha\\ vertical velocity field in a sample of four nearly face-on galaxies using long slit spectroscopy taken with the ISIS spectrograph attached to the WHT at the Roque de los Muchachos Observatory (Spain). The spatial structure of the velocity vertical component shows a radial corrugated pattern with spatial scales higher or within the order of { one} kiloparsec. The gas is mainly ionized by high-energy photons: only in some locations of NGC~278 and NGC~1058 is there some evidence of ionization by low-velocity shocks, which, in the case of NGC~278, could be due to minor mergers. The behaviour of the gas in the neighbourhood of the spiral arms fits, in the majority of the observed cases, with that predicted by the so-called hydraulic bore mechanism, where a thick magnetized disk encounters a spiral density perturbation. The results obtained show that it is { difficult to explain the \\Ha\\ large scale velocity field without the presence of a magnetized, thick galactic disk}. Larger sa...

  19. Corrugated Shell Displacements During the Passage of a Vehicle Along a Soil-Steel Structure

    Science.gov (United States)

    Machelski, Czesław; Mumot, Marcin

    2016-12-01

    Corrugated steel plates are highly rigid and as the constructions can be immersed in soil, they can be used as soil-steel structures. With an increase of cover depth, the effectiveness of operating loads decreases. A substantial reduction of the impacts of vehicles takes place as a road or rail surface with its substructure is crucial. The scope of load's impact greatly exceeds the span L of a shell. This article presents the analysis of deformations of the upper part of a shell caused by a live load. One of the assumptions used in calculations performed in Plaxis software was the circle-shaped shell and the circumferential segment of the building structure in the 2D model. The influence lines of the components of vertical and horizontal displacements of points located at the highest place on the shell were used as a basis of analysis. These results are helpful in assessing the results of measurements carried out for the railway structure during the passage of two locomotives along the track. This type of load is characterized by a steady pressure onto wheels with a regular wheel base. The results of measurements confirmed the regularity of displacement changes during the passage of this load.

  20. Diffraction inspired unidirectional and bidirectional beam splitting in defect-containing photonic structures without interface corrugations

    Science.gov (United States)

    Colak, Evrim; Serebryannikov, Andriy E.; Usik, P. V.; Ozbay, Ekmel

    2016-05-01

    It is shown that strong diffractions and related dual-beam splitting can be obtained at transmission through the nonsymmetric structures that represent two slabs of photonic crystal (PhC) separated by a single coupled-cavity type defect layer, while there are no grating-like corrugations at the interfaces. The basic operation regimes include unidirectional and bidirectional splitting that occur due to the dominant contribution of the first positive and first negative diffraction orders to the transmission, which is typically connected with different manifestations of the asymmetric transmission phenomenon. Being the main component of the resulting transmission mechanism, diffractions appear owing to the effect exerted by the defect layer that works like an embedded diffractive element. Two mechanisms can co-exist in one structure, which differ, among others, in that whether dispersion allows coupling of zero order to a wave propagating in the regular, i.e., defect-free PhC segments or not. The possibility of strong diffractions and efficient splitting related to it strongly depend on the dispersion properties of the Floquet-Bloch modes of the PhC. Existence of one of the studied transmission scenarios is not affected by location of the defect layer.