WorldWideScience

Sample records for corrosion inhibitive effect

  1. Synergistic effects in the inhibition of copper corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, S.; Laz, M.M.; Souto, R.M. (Univ. de La Laguna, Tenerife, (Spain). Dept. de Quimica Fisica); Salvarezza, R.C.; Arvia, A.J. (Univ. Nacional de La Plata, (Argentina))

    1993-06-01

    Benzotriazole (BTA), thiourea (TU), and potassium ethylxanthate (KEX), behave as copper (Cu) corrosion inhibitors under certain conditions. These chemicals have been investigated to establish whether they provided synergistic effects. The Cu corrosion inhibition was followed through changes in electrochemical characteristics. Cu specimens were tested at 25 C in two aggressive media, 0.1 M NaCl and 1 M NaClO[sub 4] using the linear potential sweep technique at 0.001 V/s and by scanning electron microscopy of Cu specimens subjected to potentiodynamic and potentiostatic routines. A comparative behavior of the different substances for Cu was presented in the 6.6 [le] pH [le] 11 range. For KEX-BTA mixtures, synergistic inhibition effects were found in 0.1 M NaCl (7 [le] pH [le] 11). The apparent synergistic inhibition was explained tentatively by an increase in the compactness of the polymer-like passivating layer of KEX-Cu, which formed in the presence of BTA and Cl[minus] ions.

  2. Adsorption and corrosion inhibiting effect of riboflavin on Q235 mild steel corrosion in acidic environments

    Energy Technology Data Exchange (ETDEWEB)

    Chidiebere, Maduabuchi A. [Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Rd, Shenyang 110016 (China); Electrochemistry and Materials Science Research Laboratory, Department of Chemistry, Federal University of Technology Owerri, PMB 1526 Owerri (Nigeria); Oguzie, Emeka E. [Electrochemistry and Materials Science Research Laboratory, Department of Chemistry, Federal University of Technology Owerri, PMB 1526 Owerri (Nigeria); Liu, Li [Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Rd, Shenyang 110016 (China); Li, Ying, E-mail: liying@imr.ac.cn [Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Rd, Shenyang 110016 (China); Wang, Fuhui [Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Rd, Shenyang 110016 (China)

    2015-04-15

    The inhibiting effect of Riboflavin (RF) on Q235 mild steel corrosion in 1 M HCl and 0.5 M H{sub 2}SO{sub 4} at 30 °C temperature was investigated using electrochemical techniques (electrochemical impedance spectroscopy and potentiodynamic polarization). The obtained results revealed that RF inhibited the corrosion reaction in both acidic solutions. Maximum inhibition efficiency values in 1 M HCl and 0.5 M H{sub 2}SO{sub 4} were 83.9% and 71.4%, respectively, obtained for 0.0012 M RF. Polarization data showed RF to be a mixed-type inhibitor, while EIS results revealed that the RF species adsorbed on the metal surface. The adsorption of RF followed Langmuir adsorption isotherm. Atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) studies confirmed the formation of a protective layer adsorbed on the steel surface. Quantum chemical calculations were used to correlate the inhibition ability of RF with its electronic structural parameters. - Highlights: • The inhibitory mechanism was influenced by the nature of acid anions. • RF has reasonable inhibition effect especially in 1 M HCl solution. • Polarization studies showed that RF functioned as a mixed type inhibitor. • Improved surface morphology was observed in the presence of RF.

  3. Plastics for corrosion inhibition

    CERN Document Server

    Goldade, Victor A; Makarevich, Anna V; Kestelman, Vladimir N

    2005-01-01

    The development of polymer composites containing inhibitors of metal corrosion is an important endeavour in modern materials science and technology. Corrosion inhibitors can be located in a polymer matrix in the solid, liquid or gaseous phase. This book details the thermodynamic principles for selecting these components, their compatibility and their effectiveness. The various mechanisms of metal protection – barrier, inhibiting and electromechanical – are considered, as are the conflicting requirements placed on the structure of the combined material. Two main classes of inhibited materials (structural and films/coatings) are described in detail. Examples are given of structural plastics used in friction units subjected to mechano-chemical wear and of polymer films/coatings for protecting metal objects against corrosion.

  4. Effect of heat treatment on the inhibition of the acidic corrosion aluminium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Khamis, E. (Alexandria Univ. (Egypt). Dept. of Chemistry); El-Gamal, M. (Alexandria Univ. (Egypt). Dept. of Material Science); El-Toukhy, A. (Alexandria Univ. (Egypt). Dept. of Material Science); Atea, M. (Alexandria Univ. (Egypt). Dept. of Material Science)

    1994-12-01

    The effect of heat treatment on the inhibition of acid corrosion of duralumin has been studied using gasometry, mass loss measurements and potentiodynamic technique. All the data reveal that the duralumin generally developed good corrosion resistance after heat treatment and the corrosion rate ranked as follows: Non treated > Naturally aged > quenched. This improvement in the corrosion resistance was attributed to the structural homogeneity of the heat-treated alloys. The presence of some selected aryl and alkyl triazoline derivatives at the threshold concentration of 5 x 10[sup -3] M indicate that these compounds retard the corrosion rate of duralumin and the extent of inhibition depends on the molecular structure of the inhibitors. Polarization curves show that the triazoline compounds act as mixed-type inhibitors affecting both the cathodic and anodic processes. Moreover, there is no noticeable difference in the degree by which the triazoline derivatives inhibit the corrosion of pure aluminium and heat treated duralumin alloy. (orig.)

  5. Effects of Solution Hydrodynamics on Corrosion Inhibition of Steel by Citric Acid in Cooling Water

    Science.gov (United States)

    Ashassi-Sorkhabi, H.; Asghari, E.; Mohammadi, M.

    2014-08-01

    Corrosion is a major problem in cooling water systems, which is often controlled using corrosion inhibitors. Solution hydrodynamics is one of the factors affecting corrosion inhibition of metals in these systems. The present work focuses on the study of the combined effects of citric acid concentration (as a green corrosion inhibitor) and fluid flow on corrosion of steel in simulated cooling water. Electrochemical techniques including Tafel polarization and electrochemical impedance spectroscopy were used for corrosion studies. Laminar flow was simulated using a rotating disk electrode. The effects of solution hydrodynamics on inhibition performance of citric acid were discussed. The citric acid showed low inhibition performance in quiescent solution; however, when the electrode rotated at 200 rpm, inhibition efficiency increased remarkably. It was attributed mainly to the acceleration of inhibitor mass transport toward metal surface. The efficiencies were then decreased at higher rotation speeds due to enhanced wall shear stresses on metal surface and separation of adsorbed inhibitor molecules. This article is first part of authors' attempts in designing green inhibitor formulations for industrial cooling water. Citric acid showed acceptable corrosion inhibition in low rotation rates; thus, it can be used as a green additive to the corrosion inhibitor formulations.

  6. Outstanding inhibitive effect of colchicine on aluminium alloy 6061 corrosion

    Directory of Open Access Journals (Sweden)

    Mudigere Krishnegowda Pavithra

    2015-12-01

    Full Text Available The corrosion protection ability of colchicine (CC on Aluminium alloy 6061 (AA6061 in 3.5% NaCl medium was examined by potentiodynamic polarization, electrochemical impedance, and chronoamperometric techniques. About 99 % of protection efficiency was achieved by 2 mM concentration of CC in 3.5% NaCl solution.The adsorption of CC on AA6061 surface obeys Langmuir isotherm by following both physisorption and chemisorption mechanism. Variation in the surface morphology of inhibited and uninhibited metal samples was examined by scanning electron microscopy. 

  7. Inhibition of Aluminium Corrosion in Hydrochloric Acid Using Nizoral and the Effect of Iodide Ion Addition

    Directory of Open Access Journals (Sweden)

    I. B. Obot

    2010-01-01

    Full Text Available The effect of nizoral (NZR on the corrosion inhibition of aluminium alloy AA 1060 in 2 M HCl solution was investigated using the mylius thermometric technique. Results of the study revealed that nizoral acts as corrosion inhibitor for aluminium in the acidic medium. In general, at constant acid concentration, the inhibition efficiency increases with increase in the inhibitor concentration. The addition of KI to the inhibitor enhanced the inhibition efficiency to a considerable extent. The adsorption of nizoral onto the aluminium surface was found to obey the Fruendlich adsorption isotherm. The value of the free energy for the adsorption process shows that the process is spontaneous.

  8. What determines the inhibition effectiveness of ATA, BTAH, and BTAOH corrosion inhibitors on copper?

    Science.gov (United States)

    Kokalj, Anton; Peljhan, Sebastijan; Finsgar, Matjaz; Milosev, Ingrid

    2010-11-24

    Three corrosion inhibitors for copper-3-amino-1,2,4-triazole (ATA), benzotriazole (BTAH), and 1-hydroxybenzotriazole (BTAOH)-were investigated by corrosion experiments and atomistic computer simulations. The trend of corrosion inhibition effectiveness of the three inhibitors on copper in near-neutral chloride solution is determined experimentally as BTAH ≳ ATA ≫ BTAOH. A careful analysis of the results of computer simulations based on density functional theory allowed to pinpoint the superior inhibiting action of BTAH and ATA as a result of their ability to form strong N-Cu chemical bonds in deprotonated form. While these bonds are not as strong as the Cl-Cu bonds, the presence of solvent favors the adsorption of inhibitor molecules onto the surface due to stronger solvation of the Cl(-) anions. Moreover, benzotriazole displays the largest affinity among the three inhibitors to form intermolecular aggregates, such as [BTA-Cu](n) polymeric complex. This is another factor contributing to the stability of the protective inhibitor film on the surface, thus making benzotriazole an outstanding corrosion inhibitor for copper. These findings cannot be anticipated on the basis of inhibitors' molecular electronic properties alone, thus emphasizing the importance of a rigorous modeling of the interactions between the components of the corrosion system in corrosion inhibition studies.

  9. Greener Approach towards Corrosion Inhibition

    Directory of Open Access Journals (Sweden)

    Neha Patni

    2013-01-01

    Full Text Available Corrosion control of metals is technically, economically, environmentally, and aesthetically important. The best option is to use inhibitors for protecting metals and alloys against corrosion. As organic corrosion inhibitors are toxic in nature, so green inhibitors which are biodegradable, without any heavy metals and other toxic compounds, are promoted. Also plant products are inexpensive, renewable, and readily available. Tannins, organic amino acids, alkaloids, and organic dyes of plant origin have good corrosion-inhibiting abilities. Plant extracts contain many organic compounds, having polar atoms such as O, P, S, and N. These are adsorbed on the metal surface by these polar atoms, and protective films are formed, and various adsorption isotherms are obeyed. Various types of green inhibitors and their effect on different metals are mentioned in the paper.

  10. Corrosion and Inhibition Effects of Mild Steel in Hydrochloric Acid Solutions Containing Organophosphonic Acid

    Directory of Open Access Journals (Sweden)

    Manish Gupta

    2013-01-01

    Full Text Available A study has been made on the mechanism of corrosion of mild steel and the effect of nitrilo trimethylene phosphonic (NTMP acid as a corrosion inhibitor in acidic medium, that is, 10% HC1 using the weight loss method and electrochemical techniques, that is, potentiodynamic and galvanostatic polarization measurements. Although corrosion is a long-time process, but it takes place at a faster rate in the beginning which goes on decreasing with due course of time. The above-mentioned methods of corrosion rate determination furnish an average value for a long-time interval. Looking at the versatility and minimum detection limit of the voltammetric method, the authors have developed a new voltammetric method for the determination of corrosion rate at short-time intervals. The results of corrosion of mild steel in 10% HC1 solution with and without NTMP inhibitor at short-time intervals have been reported. The corrosion inhibition efficiency of NTMP is 93% after 24 h.

  11. Synergistic Effect on Corrosion Inhibition Efficiency of Ginger Affinale Extract in Controlling Corrosion of Mild Steel in Acid Medium

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, Ananth Kumar; Arumugam, Sankar [Kandaswami Kandar' s College, Namakkal (India); Mallaiya, Kumaravel; Subramaniam, Rameshkumar [PSG College of Technology Peelamedu, Coimbatore (India)

    2013-12-15

    The corrosion inhibition nature of Ginger affinale extract for the corrosion of mild steel in 0.5N H{sub 2}SO{sub 4} was investigated using weight loss, electrochemical impedance and potentiodynamic polarization methods. The results revealed that Ginger affinale extract acts as a good corrosion inhibitor in 0.5N H{sub 2}SO{sub 4} medium. The inhibition efficiency increased with an increase in inhibitor concentration. The inhibition could be attributed to the adsorption of the inhibitor on the steel surface.

  12. Adsorption and corrosion-inhibiting effect of Dacryodis edulis extract on low-carbon-steel corrosion in acidic media.

    Science.gov (United States)

    Oguzie, E E; Enenebeaku, C K; Akalezi, C O; Okoro, S C; Ayuk, A A; Ejike, E N

    2010-09-01

    The inhibition of low-carbon-steel corrosion in 1M HCl and 0.5M H(2)SO(4) by extracts of Dacryodis edulis (DE) was investigated using gravimetric and electrochemical techniques. DE extract was found to inhibit the uniform and localized corrosion of carbon steel in the acidic media, affecting both the cathodic and anodic partial reactions. The corrosion process was inhibited by adsorption of the extracted organic matter onto the steel surface in a concentration-dependent manner and involved both protonated and molecular species. Molecular dynamics simulations were performed to illustrate the process of adsorption of some specific components of the extract.

  13. Graphene: corrosion-inhibiting coating.

    Science.gov (United States)

    Prasai, Dhiraj; Tuberquia, Juan Carlos; Harl, Robert R; Jennings, G Kane; Rogers, Bridget R; Bolotin, Kirill I

    2012-02-28

    We report the use of atomically thin layers of graphene as a protective coating that inhibits corrosion of underlying metals. Here, we employ electrochemical methods to study the corrosion inhibition of copper and nickel by either growing graphene on these metals, or by mechanically transferring multilayer graphene onto them. Cyclic voltammetry measurements reveal that the graphene coating effectively suppresses metal oxidation and oxygen reduction. Electrochemical impedance spectroscopy measurements suggest that while graphene itself is not damaged, the metal under it is corroded at cracks in the graphene film. Finally, we use Tafel analysis to quantify the corrosion rates of samples with and without graphene coatings. These results indicate that copper films coated with graphene grown via chemical vapor deposition are corroded 7 times slower in an aerated Na(2)SO(4) solution as compared to the corrosion rate of bare copper. Tafel analysis reveals that nickel with a multilayer graphene film grown on it corrodes 20 times slower while nickel surfaces coated with four layers of mechanically transferred graphene corrode 4 times slower than bare nickel. These findings establish graphene as the thinnest known corrosion-protecting coating.

  14. Corrosion Inhibition Effect of Dicycloimine Hydrochloride (DCI on Mild Steel in 1M HCl

    Directory of Open Access Journals (Sweden)

    R. Rajalakshmi

    2010-01-01

    Full Text Available Addition of corrosion inhibitors is one of the widely used methods to control corrosion. In this work, an attempt has been made to explore the possibility of using dicycloimine hydrochloride (DCI as an inhibitor on mild steel in 1 M HCl. The inhibition efficiency of DCI has been evaluated by conventional weight loss method and electrochemical polarization studies. Experimental results are fitted to various adsorption isotherms. Thermodynamic parameters have also been studied from temperature studies. The results reveal that DCI acts as an effective inhibitor (around 90% of IE in HCl media.

  15. Inhibiting Effects of Rabeprazole Sulfide on the Corrosion of Mild Steel in Acidic Chloride Solution

    Directory of Open Access Journals (Sweden)

    M. K. Pavithra

    2013-01-01

    Full Text Available The corrosion inhibition effect of Rabeprazole sulfide (RS on mild steel in 1 M hydrochloric acid (HCl was investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS, and chronoamperometric measurements. Protection efficiency of RS increases with the concentration and decreases with the rise in temperature. Adsorption of RS on mild steel surface in 1 M HCl follows Langmuir adsorption isotherm. The kinetic and thermodynamic parameters governing the adsorption process were calculated and discussed. The polarization results suggest that RS performed as an excellent mixed-type inhibitor for mild steel corrosion in 1 M HCl.

  16. Inhibition Effect of Substituted Thiadiazoles on Corrosion Activity of N80 Steel in HCl Solution

    Directory of Open Access Journals (Sweden)

    M. Yadav

    2013-01-01

    Full Text Available The inhibition effect of some prepared compounds, namely, thiadiazole derivatives, on N80 steel corrosion in 15% HCl solutions has been studied by using the weight loss, electrochemical polarization, and electrochemical impedance spectroscopy techniques. It was found that the inhibition efficiency of the thiadiazole derivatives, namely, 2-amino-5-(4-methoxyphenyl-1,3,4-thiazole (AMPT, 2-amino-5-phenyl-1,3,4-thiazole (APT, and 2-amino-5-(4-chlorophenyl-1,3,4-thiazole (ACPT, increases with the increase in concentration. Inhibition efficiency follows the order AMPT > APT > ACPT. The effect of temperature on the corrosion was investigated by the weight loss method, and some thermodynamic parameters were calculated. The inhibitive action may be attributed to the adsorption of inhibitor molecules on the active sites of the metal surface following Langmuir adsorption isotherm. Polarization measurements indicated that thiadiazole derivatives act as mixed-type corrosion inhibitor. The adsorption of thiadiazole derivatives on N80 surface exposed to inhibitor-containing solutions was confirmed using SEM and FT-IR spectra.

  17. Two new supramolecular metal diphosphonates: Synthesis, characterization, crystal structure and inhibiting effects on metallic corrosion

    Science.gov (United States)

    Gholivand, Khodayar; Yaghoubi, Rouhollah; Farrokhi, Alireza; Khoddami, Shahram

    2016-11-01

    Two new divalent metal(II) aminodiphosphonates with layered structure, namely, Cu(H3L1)2·2H2O (1), [H4L1=methyl-N(CH2PO3H2)2] and Cd2(H2L2)4(2), [H4L2=n-propyl-N(CH2PO3H2)2] were synthesized and characterized. The Cu(II) ions in complex 1 are octahedrally coordinated by four oxygen atoms from two chelating ligands and two phosphonate oxygen atoms from two neighboring Cu(H3L1)2 units. The Cu(H3L1)2 units are interconnected by bridging phosphonate groups, forming a 2-D metal phosphonate layer. The structure of complex 2 contains two unique Cd(II) ions octahedrally-coordinated by six phosphonate oxygen atoms from four H2L2 diphosphonate anions. Corrosion inhibition performances of 1 and 2 were also compared with each other in order to study the effect of combinations of externally added Cd/H4L2 and Cu/H4L1 (1:1 ratio) on corrosion rates of carbon steel. It was found that at pH 3.0, Cd/H4L2 or Cu/H4L1 combinations do not have noticeable corrosion inhibition efficiency for carbon steel. In contrast, at pH 7.0, higher corrosion inhibition efficiency was achieved for Cd/H4L2. Physical characterizations such as scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) were applied to study the corrosion specimens and film material.

  18. Effect of Ammonium Molybdate Inhibition on Corrosion Behaviour of Mild Steel in Chloride and Sulphide Media

    Directory of Open Access Journals (Sweden)

    Ayo S. Afolabi

    2010-10-01

    Full Text Available The corrosion inhibition of mild steel in 3.0 M sodium chloride and 0.5 M sodium sulphide using various concentrations of ammonium molybdate was investigated in this work. The inhibition effect of this reagent in these media was monitored by weight loss and pH measurements. The analyses of the weight loss results showed that the corrosion susceptibility of mild steel in 3.0 M sodium chloride was more pronounced than in 0.5 M of sodium sulphide due to the aggressive chloride ions in the former and the weak nature of the latter. Ammonium molybdate produced a better inhibition performance of mild steel in 0.5 M sodium suphide than in 3.0 M sodium chloride medium and the higher the concentration of ammonium molybdate the more the inhibition performance on mild steel in the media studied. Optimum inhibition was obtained at 2.5 M ammonium molybdate in both media. The pH values in chloride medium remained acidic throughout the exposure period while those of sulphide medium shifted to alkaline region with exposure time; an effect that was traceable to higher inhibition obtained in the latter medium.

  19. Complete corrosion inhibition through graphene defect passivation.

    Science.gov (United States)

    Hsieh, Ya-Ping; Hofmann, Mario; Chang, Kai-Wen; Jhu, Jian Gang; Li, Yuan-Yao; Chen, Kuang Yao; Yang, Chang Chung; Chang, Wen-Sheng; Chen, Li-Chyong

    2014-01-28

    Graphene is expected to enable superior corrosion protection due to its impermeability and chemical inertness. Previous reports, however, demonstrate limited corrosion inhibition and even corrosion enhancement of graphene on metal surfaces. To enable the reliable and complete passivation, the origin of the low inhibition efficiency of graphene was investigated. Combining electrochemical and morphological characterization techniques, nanometer-sized structural defects in chemical vapor deposition grown graphene were found to be the cause for the limited passivation effect. Extremely fast mass transport on the order of meters per second both across and parallel to graphene layers results in an inhibition efficiency of only ∼50% for Cu covered with up to three graphene layers. Through selective passivation of the defects by atomic layer deposition (ALD) an enhanced corrosion protection of more than 99% was achieved, which compares favorably with commercial corrosion protection methods.

  20. Inhibition of aluminum corrosion using Opuntia extract

    Energy Technology Data Exchange (ETDEWEB)

    El-Etre, A.Y

    2003-11-01

    The inhibitive action of the mucilage extracted from the modified stems of prickly pears, toward acid corrosion of aluminum, is tested using weight loss, thermometry, hydrogen evolution and polarization techniques. It was found that the extract acts as a good corrosion inhibitor for aluminum corrosion in 2.0 M HCl solution. The inhibition action of the extract was discussed in view of Langmuir adsorption isotherm. It was found that the adsorption of the extract on aluminum surface is a spontaneous process. The inhibition efficiency (IE) increases as the extract concentration is increased. The effect of temperature on the IE was studied. It was found that the presence of extract increases the activation energy of the corrosion reaction. Moreover, the thermodynamic parameters of the adsorption process were calculated. It was found also that the Opuntia extract provides a good protection to aluminum against pitting corrosion in chloride ion containing solutions.

  1. Corrosion inhibition of a hygroscopic inorganic dust-depressor

    Institute of Scientific and Technical Information of China (English)

    Longzhe Jin; Lu Wang; Dongke Chen

    2006-01-01

    Metallic corrosion is a serious problem in the application of a hygroscopic inorganic dust-depressor. The basic characteristics of a hygroscopic inorganic dust-depressor and its corrosivity, corrosion mechanism, as well as the principle of corrosion inhibition were analyzed. The static mass-loss test was carried out to investigate the corrosion behavior and the effect of the dustdepressor. The static corrosion rates of steel specimens were measured in six different corrosion inhibitor solutions of the dustdepressor, and the suitable corrosion inhibitors for the dust-depressor to reduce the corrosivity were found out.

  2. Synergistic Inhibition Effect of Zinc Acetylacetonate and Benzothiazole in Epoxy Coating on the Corrosion of Mild Steel

    Science.gov (United States)

    Amoozadeh, S. M.; Mahdavian, M.

    2015-06-01

    The corrosion inhibition effect of zinc acetylacetonate (ZAA) and benzothiazole (BTH) mixture was evaluated for mild steel in 3.5% NaCl solution. To this end, ZAA:BTH mixtures ranged from 6:1 to 1:6 mol ratios were examined by weight loss and open circuit potential to obtain optimal mole ratio. The optimal mixture of ZAA:BTH at 1:5 mol ratio showed a significant corrosion inhibition efficiency proved by electrochemical impedance spectroscopy and polarization studies. The addition of the optimal mixture of ZAA:BTH to epoxy coating showed a considerable increase of corrosion protection evaluated by salt spray exposure.

  3. Inhibitive effect of some thiadiazole derivatives on C-steel corrosion in neutral sodium chloride solution

    Energy Technology Data Exchange (ETDEWEB)

    El-Taib Heakal, F., E-mail: fakihaheakal@yahoo.com [Chemistry Department, Faculty of Science, Cairo University, Giza 12613 (Egypt); Fouda, A.S. [Chemistry Department, Faculty of Science, El-Mansoura University, El-Mansoura (Egypt); Radwan, M.S. [Petrogulf Misr Company, Maadi, Cairo (Egypt)

    2011-01-01

    Electrochemical techniques were used to investigate the effect of concentration of three new thiadiazole derivatives (I-III) on the corrosion behavior of C-steel in 0.5 M NaCl solution through the analysis of electrochemical measurements including open circuit potential (OCP), Tafel polarization and electrochemical impedance spectroscopy (EIS). Polarization curves showed that the compounds studied act as anodic type inhibitors, where the inhibition efficiency increases with increase in inhibitor concentration and decreases with rise in temperature. An adherent layer of inhibitor molecules on the surface is proposed to account for their inhibitive action in which the organic molecules adsorb on the active anodic sites following Langmuir isotherm. The thermodynamic parameters of adsorption and corrosion processes were determined and discussed. The results also indicated that pitting potential at higher anodic polarization of C-steel in 0.5 M NaCl solution becomes more positive the higher the concentration of the additive, suggesting that these inhibitors acts as retarding catalyst for pitting corrosion. EIS data confirm well the electrochemical dc results and the results are all in good agreement with the calculated quantum chemical HOMO and LUMO energies of the tested molecules, as well as with surface examination via scanning electron microscope.

  4. Corrosion inhibition and adsorption behavior of methionine on mild steel in sulfuric acid and synergistic effect of iodide ion.

    Science.gov (United States)

    Oguzie, E E; Li, Y; Wang, F H

    2007-06-01

    The corrosion inhibition of mild steel in sulfuric acid by methionine (MTI) was investigated using electrochemical techniques. The effect of KI additives on corrosion inhibition efficiency was also studied. The results reveal that MTI inhibited the corrosion reaction by adsorption onto the metal/solution interface. Inhibition efficiency increased with MTI concentration and synergistically increased in the presence of KI, with an optimum [KI]/[MTI] ratio of 5/5, due to stabilization of adsorbed MTI cations as revealed by AFM surface morphological images. Potentiodynamic polarization data suggest that the compound functioned via a mixed-inhibition mechanism. This observation was further corroborated by the fit of the experimental adsorption data to the Temkin and Langmuir isotherms. The inhibition mechanism has been discussed vis-à-vis the presence of both nitrogen and sulfur atoms in the MTI molecule.

  5. Adsorption Behavior and Inhibition Corrosion Effect of Sodium Carboxymethyl Cellulose on Mild Steel in Acidic Medium

    Institute of Scientific and Technical Information of China (English)

    BAYOL E; G(U)RTEN A.A; DURSUN M.; KAYAK(I)R(I)LMAZ K.

    2008-01-01

    The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol· L-1 HC1 solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L-1 HC1. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol ·L-1 HC1 with addition of 0.04% of Na-CMC has been studied in the temperature range of 298-328 K The associated apparent activation energy (E*a) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.

  6. Inhibition effect of phosphorus-based chemicals on corrosion of carbon steel in secondary-treated municipal wastewater.

    Science.gov (United States)

    Shen, Zhanhui; Ren, Hongqiang; Xu, Ke; Geng, Jinju; Ding, Lili

    2013-01-01

    Secondary-treated municipal wastewater (MWW) could supply a viable alternative water resource for cooling water systems. Inorganic salts in the concentrated cooling water pose a great challenge to corrosion control chemicals. In this study, the inhibition effect of 1-hydroxy ethylidene-1,1-diphosphonic acid (HEDP), trimethylene phosphonic acid (ATMP) and 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) on corrosion of carbon steel in secondary-treated MWW was investigated by the means of potentiodynamic polarization and electrochemical impedance spectroscopy. The inhibition effect increased with increasing concentration of inhibitors. The corrosion rates of carbon steel were 1.5, 0.8, 0.2 and 0.5 mm a(-1) for blank, HEDP, ATMP and PBTCA samples at 50 mg L(-1), respectively. The phosphorus-based chemicals could adsorb onto the surface of the carbon steel electrode, form a coat of protective film and then protect the carbon steel from corrosion in the test solution.

  7. The Inhibition Effect of Potassium Iodide on the Corrosion of Pure Iron in Sulphuric Acid

    Directory of Open Access Journals (Sweden)

    Tarik Attar

    2014-01-01

    Full Text Available The use of inorganic inhibitors as an alternative to organic compounds is based on the possibility of degradation of organic compounds with time and temperature. The inhibition effect of potassium iodide on the corrosion of pure iron in 0.5 M H2SO4 has been studied by weight loss. It has been observed from the results that the inhibition efficiency (IE% of KI increases from 82.17% to 97.51% with the increase in inhibitor concentration from 1·10−4 to 2·10−3 M. The apparent activation energy (Ea and the equilibrium constant of adsorption (Kads were calculated. The adsorption of the inhibitor on the pure iron surface is in agreement with Langmuir adsorption isotherm.

  8. Inhibition effects of acetyl coumarines and thiazole derivatives on corrosion of zinc in acidic medium

    Indian Academy of Sciences (India)

    A V Shanbhag; T V Venkatesha; R A Prabhu; B M Praveen

    2011-06-01

    The corrosion inhibition characteristics of acetyl coumarine (AC), bromo acetyl coumarine (BAC) and thiazole derivatives (BTMQ and BTCQ) on the corrosion of zinc in 0.1 M HCl solution were investigated by weight loss, potentiodynamic polarization and impedance techniques. The inhibition efficiency increased with increase in inhibitor concentration upto 5 × 10-4 M, then gave almost same inhibition efficiency. The polarizationmeasurements indicated the mixed nature of inhibitors. The adsorption of compounds obeyed Langmuir’s adsorption isotherm. The thermodynamic functions for adsorption processes were evaluated.

  9. Synergistic Effect of Tungstate and Benzotriazole on Corrosion Inhibition of Carbon Steel in Solutions Containing Cl-

    Institute of Scientific and Technical Information of China (English)

    LI Yan; XI Dan-li; LU Zhu

    2004-01-01

    The corrosion inhibition of tungstate, benzotriazole (BTA) and their combination in solutions containing Cl- was studied by electrochemical techniques. The results indicated that the inhibition efficiency of tungstate was higher than that of BTA. The efficiency increased with increasing concentration of tungstate or BTA. In the studies of synergistic effect of tungstate and BTA, it had been found that in Ph 9.0 solution, the largest Rt could be obtained with the concentration ratio of tungstate / BTA being 1:1. Lowering the Ph value of solution would reduce the efficiency of inhibitors, especially in binary inhibitors. Increasing the concentration of Cl- accelerated the corrosion of carbon steel in the solutions with various inhibitors, but the influence of Cl- on corroding rate in binary inhibitors was not so strong as in single component. The results of surface analysis showed that W, C, N, O and Fe elements existed in the protecting film formed with binary inhibitors. The thickness of the film was about 12-15nm.

  10. Inhibition Effect of Glycerol on the Corrosion of Copper in NaCl Solutions at Different pH Values

    Directory of Open Access Journals (Sweden)

    Santos Lorenzo Chi-Ucán

    2014-01-01

    Full Text Available The inhibitory effect of glycerol on copper corrosion in aerated NaCl (0.5 M solutions at three pH values (4, 7, and 10 was evaluated. Inhibition efficiency was assessed with conventional electrochemical techniques: open circuit potential, potentiodynamic polarization, and electrochemical impedance analysis. Glycerol reduced the corrosion rate of copper in NaCl solutions. The best inhibition effect (η≈83% was produced in alkaline (pH 10 chloride media. This effect can be ascribed to increased viscosity and the presence of copper-glycerol complexes.

  11. Assessment of Commercial Corrosion Inhibiting Admixtures for Reinforced Concrete

    OpenAIRE

    Brown, Michael Carey

    1999-01-01

    Corrosion of reinforcing steel in concrete exposed to chloride-laden environments is a well-known and documented phenomenon. The need for cost effective systems for protection against corrosion has become increasingly clear since the first observations of severe corrosion damage to interstate bridges in the 1960's. As one potential solution to the mounting problem of corrosion deterioration of structures, corrosion-inhibiting admixtures have been researched and introduced into service. ...

  12. Durability and synergistic effects of KI on the acid corrosion inhibition of mild steel by hydroxypropyl methylcellulose.

    Science.gov (United States)

    Arukalam, I O

    2014-11-04

    The performance of hydroxypropyl methylcellulose (HPMC) as safe corrosion inhibitor for mild steel in aerated 0.5M H2SO4 solution was appraised by weight loss, impedance and polarization measurements. Results indicate that HPMC functions as a good inhibitor in the studied environment and inhibition efficiency increased with increasing concentration of inhibitor and temperature. Time-dependent effect of the inhibition efficiency reveals that inhibition efficiency increased with time up to the fourth day after which it waned, but improved on addition of KI. The synergism parameter evaluated confirmed the synergistic effect of KI and HPMC. Impedance results clearly show that HPMC inhibited the corrosion reaction via adsorption onto the metal/solution interface following Freundlich adsorption isotherm. Polarization results indicate that HPMC acts as a mixed-type inhibitor with predominant cathodic effect. Theoretical study using density functional theory was employed to establish the correlation between the structure (molecular and electronic) and the inhibition efficiency.

  13. INHIBITION OF CORROSION

    Science.gov (United States)

    Atherton, J.E. Jr.; Gurinsky, D.H.

    1958-06-24

    A method is described for preventing corrosion of metallic container materials by a high-temperature liquid bismuth flowing therein. The method comprises fabricating the containment means from a steel which contains between 2 and 12% chromium, between 0.5 and 1.5% of either molybdenum and silicon, and a minimum of nickel and manganese, and maintaining zirconium dissolved in the liquid bismuth at a concentration between 50 parts per million and its saturation value at the lowest temperature in the system.

  14. Corrosion Inhibition Effect of Carbon Steel in Sea Water by L-Arginine-Zn2+ System

    Directory of Open Access Journals (Sweden)

    S. Gowri

    2014-01-01

    Full Text Available The inhibition efficiency of L-Arginine-Zn2+ system in controlling corrosion of carbon steel in sea water has been evaluated by the weight-loss method. The formulation consisting of 250 ppm of L-Arginine and 25 ppm of Zn2+ has 91% IE. A synergistic effect exists between L-Arginine and Zn2+. Polarization study reveals that the L-Arginine-Zn2+ system functions as an anodic inhibitor and the formulation controls the anodic reaction predominantly. AC impedance spectra reveal that protective film is formed on the metal surface. Cyclic voltammetry study reveals that the protective film is more compact and stable even in a 3.5% NaCl environment. The nature of the protective film on a metal surface has been analyzed by FTIR, SEM, and AFM analysis.

  15. Effect of piperidones on hydrogen permeation and corrosion inhibition of mild steel in acidic solutions

    Indian Academy of Sciences (India)

    S Muralidharan; R Chandrasekar; S V K Iyer

    2000-04-01

    The influence of 3-methyl-2,6-diphenyl piperidin-4-one (MDPO) and 2-phenyl decahydroquinoline-4-one (PDQO) synthesised in the laboratory on hydrogen permeation and corrosion inhibition of mild steel in 1N H2SO4 has been studied using weight loss and various electrochemical AC and DC corrosion-monitoring techniques. Both the compounds inhibit the corrosion of mild steel in H2SO4 Potentiodynamic polarisation studies clearly reveal that they behave predominantly as cathodic inhibitors. The extent of decrease in hydrogen permeation current through steel surfaces has been studied by the hydrogen electropermeation technique. Double layer capacitance () and charge transfer resistance () values are derived from Nyquist plots obtained from AC impedance studies. The adsorption of these compounds on mild steel surfaces from H2SO4 obeys Temkin’s adsorption isotherm.

  16. Inhibition Effect of 1-Butyl-4-Methylpyridinium Tetrafluoroborate on the Corrosion of Copper in Phosphate Solutions

    Directory of Open Access Journals (Sweden)

    M. Scendo

    2011-01-01

    Full Text Available The influence of the concentration of 1-Butyl-4-methylpyridinium tetrafluoroborate (4MBPBF4 as ionic liquid (IL on the corrosion of copper in 0.5 M PO43− solutions of pH 2 and 4 was studied. The research involved electrochemical polarization method, and scanning electron microscopy (SEM technique. The results obtained showed that the inhibition efficiency of corrosion of copper increases with an increase in the concentration of 4MBPBF4 but decreases with increasing temperature. The thermodynamic functions of corrosion analysis and adsorptive behavior of 4MBPBF4 were carried out. During the test, the adsorption of the inhibitor on the copper surface in the phosphate solutions was found to obey the Langmuir adsorption isotherm and had a physical mechanism.

  17. Inhibiting Effect of Indole and Some of Its Derivatives on Corrosion of C-Steel in HCl

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The Inhibiting effect of indole (A), indole acetic acid (B), indole buteric acid (C), and 3-acetyl indole (D), on the corrosion of three carbon steels in 10% HCl was investigated by using galvanostatic polarization method and open circuit potential measurements. It was observed that the inhibiting action of inhibitors increased with increasing inhibitor concentration. The best inhibiting effect obtained at the highest concentration (200×10-6 g/L) of the inhibitors for the three carbon steels. According to polarization and open circuit potential methods the inhibitors have effect on both anodic and cathodic area.

  18. The inhibitive effect of bipyrazolic derivatives on the corrosion of steel in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Tebbji, K. [Laboratoire de Chimie des Eaux et Corrosion, Faculte des Sciences, B.P. 717, Oujda (Morocco); Hammouti, B. [Laboratoire de Chimie des Eaux et Corrosion, Faculte des Sciences, B.P. 717, Oujda (Morocco); Oudda, H. [Laboratoire des Procedes de Separation, Faculte des Sciences, Kenitra (Morocco); Ramdani, A. [Laboratoire de Chimie Organique-Physique, Faculte des Sciences, B.P. 717, Oujda (Morocco); Benkadour, M. [Laboratoire de Chimie des Eaux et Corrosion, Faculte des Sciences, B.P. 717, Oujda (Morocco)

    2005-12-15

    The effect of two pyrazole-type organic compounds, namely ethyl 5,5'-dimethyl-1'H-1,3'-bipyrazole-3 carboxylate (P1) and 3,5,5'-trimethyl-1'H-1,3'-bipyrazole (P2) on the corrosion behaviour of steel in 1 M hydrochloric acid (HCl) solution is investigated at 308 K by weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS) methods. The inhibition efficiencies obtained from cathodic Tafel plots, gravimetric and EIS methods are in good agreement. Results obtained show that the compound P2 is the best inhibitor and its efficiency reaches 84% at 10{sup -3} M. Potentiodynamic polarisation studies show that pyrazolic derivatives are cathodic-type inhibitors and these compounds act on the cathodic reaction without changing the mechanism of the hydrogen evolution reaction. The inhibition efficiency of P2 is temperature-dependent in the range from 308 to 353 K and the associated activation energy has been determined. P2 adsorbs on the steel surface according to Langmuir adsorption model. The calculation of the total partial charge of inhibitor atoms is computed.

  19. C6H5NH2 effect on the corrosion inhibition of aluminium in 0.5 M HCl

    Science.gov (United States)

    Omotosho, Olugbenga Adeshola; Okeniyi, Joshua Olusegun; Loto, Cleophas Akintoye; Popoola, Abimbola Patricia Idowu; Fademi, Ekundayo Oluwademilade Jacob; Oladipupo, Segun Isaac; Alabi, Ayomide Samuel; Ajibola, Omokolade Bamidele; Emelieze, Alex Nwabunor

    2017-02-01

    In this paper, C6H6NH2 (aniline) effect on the corrosion of aluminium in 0.5 M (i.e. mol/L) HCl medium was studied using gravimetric method by weight loss measurements and electrochemical technique of corrosion potential and potentiodynamic polarization by cyclic voltamery (CV) instrumentation. By these techniques, corrosion rate obtained from aluminium specimens, in 0.5 HCl test-solution having different concentrations of the hydrogen-containing C6H6NH2 chemical, were requisitely analysed. Results showed that the potentiodynamic corrosion rate excellently correlated (R = 98.94%, Nash-Sutcliffe efficiency = 97.89% and ANOVA p-value = 0.0314) with function of the gravimetric corrosion rate and C6H5NH2 concentration. Both experimental and correlated prediction models identified 0.043 mol/L C6H5NH2 with optimal inhibition efficiency performance η = 84.11% by the experimental or η = 81.15% by the predicted models. Fittings of experimental and correlated data showed the data models followed the Langmuir adsorption isotherm from which favourable adsorption and prevalent physisorption were indicated as the C6H5NH2 corrosion-protection on aluminium metal in the 0.5 M HCl medium.

  20. Inhibitive effect of Xylopia ferruginea extract on the corrosion of mild steel in 1M HCl medium

    Science.gov (United States)

    Raja, Pandian Bothi; Rahim, Afidah Abdul; Osman, Hasnah; Awang, Khalijah

    2011-08-01

    The alkaloid content of the leaves and stem bark of Xylopia ferruginea plant was isolated and tested for its anticorrosion potential on mild steel corrosion in a hydrochloric acid medium by using electrochemical impedance spectroscopy, potentiodynamic polarization measurement, scanning electron microscopy (SEM), and Fourier transform infra red (FTIR) analysis. The experimental results reveal the effective anticorrosion potential of the plant extract. The mixed mode of action exhibited by the plant extract is evidenced from the polarization study. SEM images proof the formation of a protective layer over the mild steel surface, and this is supported by the FTIR study. The possible mode of the corrosion inhibition mechanism has also been discussed.

  1. Corrosion Inhibition of a Green Scale Inhibitor Polyepoxysuccinic Acid

    Institute of Scientific and Technical Information of China (English)

    Rong Chun XIONG; Qing ZHOU; Gang WEI

    2003-01-01

    The corrosion inhibition of a green scale inhibitor, polyepoxysuccinic acid (PESA) wasstudied based on dynamic tests. It is found that when PESA is used alone, it had good corrosioninhibition. So, PESA should be included in the category of corrosion inhibitors. It is not only akind of green scale inhibitor, but also a green corrosion inhibitor. The synergistic effect betweenPESA and Zn2+ or sodium gluconate is poor. However, the synergistic effect among PESA, Zn2+and sodium gluconate is excellent, and the corrosion inhibition efficiency for carbon steel is higherthan 99%. Further study of corrosion inhibition mechanism reveals that corrosion inhibition ofPESA is not affected by carboxyl group, but by the oxygen atom inserted The existence ofoxygen atom in PESA molecular structure makes it easy to form stable chelate with pentacyclicstructure.

  2. The effect of triphenylphosphane on corrosion inhibition of benzotriazole at Ag electrode monitored by SERS in nonaqueous solution

    Science.gov (United States)

    Yuan, Ya-Xian; Yang, Feng-Zhu; Morag, Clark-Heptinstall; Liu, Dong; Zhang, Yong; Gu, Ren-Ao; Yao, Jian-Lin

    2013-03-01

    The corrosion inhibition behavior of benzotriazole (BTAH) on Ag electrodes and the influence of triphenylphosphane (pph3) were investigated by electrochemical method, in situ surface-enhanced Raman spectroscopy (SERS) and direct electrochemical synthesis of surface complexes in nonaqueous solution. The results indicated that the BTA- ion was coordinated to the Ag surface to form a highly cross-linked surface polymer complex of [Ag(BTA)]n, which suppressed the dissolution and oxidation of Ag effectively. The introduction of a neutral ligand of pph3 blocked the surface coordination processes of BTAH with the Ag electrode. It resulted in a decrease of inhibition efficiency to Ag surface. The ligand of pph3 played a negative role on the corrosion inhibition of BTAH to the Ag electrode. The SERS results were well consistent with the cyclic voltammetry and polarization curves measurements. For modeling, two different surface complexes were prepared in acetonitrile with and without pph3 by direct electrochemical synthesis. A polymer-like complex of [Ag(BTA)]n attached to the Ag surface was obtained in the absence of pph3, which suppressed the dissolution and oxidation of Ag effectively. A new binuclear compound, Ag2(BTA)2(pph3)4, was produced in acetonitrile with pph3 and the final coordination process occurred in solution leading to difficulties in forming a compact surface film, thus decreasing the corrosion inhibition efficiency of BTAH. The role of pph3 and the mechanism were proposed.

  3. The effect of triphenylphosphane on corrosion inhibition of benzotriazole at Ag electrode monitored by SERS in nonaqueous solution.

    Science.gov (United States)

    Yuan, Ya-Xian; Yang, Feng-Zhu; Morag, Clark-Heptinstall; Liu, Dong; Zhang, Yong; Gu, Ren-Ao; Yao, Jian-Lin

    2013-03-15

    The corrosion inhibition behavior of benzotriazole (BTAH) on Ag electrodes and the influence of triphenylphosphane (pph(3)) were investigated by electrochemical method, in situ surface-enhanced Raman spectroscopy (SERS) and direct electrochemical synthesis of surface complexes in nonaqueous solution. The results indicated that the BTA(-) ion was coordinated to the Ag surface to form a highly cross-linked surface polymer complex of [Ag(BTA)](n), which suppressed the dissolution and oxidation of Ag effectively. The introduction of a neutral ligand of pph(3) blocked the surface coordination processes of BTAH with the Ag electrode. It resulted in a decrease of inhibition efficiency to Ag surface. The ligand of pph(3) played a negative role on the corrosion inhibition of BTAH to the Ag electrode. The SERS results were well consistent with the cyclic voltammetry and polarization curves measurements. For modeling, two different surface complexes were prepared in acetonitrile with and without pph(3) by direct electrochemical synthesis. A polymer-like complex of [Ag(BTA)](n) attached to the Ag surface was obtained in the absence of pph(3), which suppressed the dissolution and oxidation of Ag effectively. A new binuclear compound, Ag(2)(BTA)(2)(pph(3))(4), was produced in acetonitrile with pph(3) and the final coordination process occurred in solution leading to difficulties in forming a compact surface film, thus decreasing the corrosion inhibition efficiency of BTAH. The role of pph(3) and the mechanism were proposed.

  4. Inhibiting effects of some oxadiazole derivatives on the corrosion of mild steel in perchloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Lebrini, Mounim [Laboratoire de Cristallochimie et Physicochimie du Solide UMR 8012 ENSCL, BP. 108, F-59652 Villeneuve d' Ascq Cedex (France); Bentiss, Fouad [Laboratoire de Cristallochimie et Physicochimie du Solide UMR 8012 ENSCL, BP. 108, F-59652 Villeneuve d' Ascq Cedex (France); Laboratoire de Chimie de Coordination et d' Analytique, Universite Chouaib Doukkali, Faculte des Sciences, B.P. 20, El Jadida (Morocco); Vezin, Herve [Laboratoire de Chimie Organique et Macromoleculaire, CNRS UMR 8009, USTL Ba-hat t C4, F-59655 Villeneuve d' Ascq Cedex (France); Lagrenee, Michel [Laboratoire de Cristallochimie et Physicochimie du Solide UMR 8012 ENSCL, BP. 108, F-59652 Villeneuve d' Ascq Cedex (France)]. E-mail: michel.lagrenee@ensc-lille.fr

    2005-11-15

    The efficiency of 3,5-bis(n-pyridyl)-1,3,4-oxadiazole (n-POX, n = 1, 2, 3), as corrosion inhibitors for mild steel in 1 M perchloric acid (HClO{sub 4}) have been determined by weight loss measurements and electrochemical studies. The results show that these inhibitors revealed a good corrosion inhibition even at very low concentrations. Comparison of results among those obtained by the studied oxadiazoles shows that 3-POX was the best inhibitor. Polarisation curves indicate that n-pyridyl substituted-1,3,4-oxadiazoles are mixed type inhibitors in 1 M HClO{sub 4}. The adsorption of these inhibitors follows a Langmuir isotherm model. The electronic properties of n-POX, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR)

  5. Inhibitive Effect of Hydrofluoric Acid Doped Poly Aniline (HFPANI on Corrosion of Iron in 1N Phosphoric Acid Solution

    Directory of Open Access Journals (Sweden)

    G.Maheswari

    2015-03-01

    Full Text Available The inhibition effect of Hydrofluoric acid doped poly aniline HF-PANI on mild steel corrosion in 1N phosphoric acid has been studied by mass loss and polarization techniques and AC impedance measurements methods between 303 K and 333K.The inhibition efficiency increased with increase in concentration of HF PANI. The corrosion rate increased with increase in temperature and decreased with increase in concentration of inhibitor compared to blank. Potentiostatic polarization results revealed that HF-PANI act as mixed type inhibitor. The inhibitor of HF-PANI was chemically adsorbed and spontaneous adsorption on the mild steel surface .The values of activation energy (Ea, free energy of adsorption (ΔGads, heat of adsorption (Qads, enthalpy of adsorption (ΔH and entropy of adsorption (ΔS were calculated. The adsorption of inhibitor on mild steel surface has been found to obey Temkin’s adsorption isotherm. SEM analysis was agreed to establish the mechanism of corrosion inhibitor on mild steel corrosion in phosphoric acid medium.

  6. Effect of Morinda Tinctoria Leaves Extract on the Corrosion Inhibition of Mild Steel in Acid Medium

    Institute of Scientific and Technical Information of China (English)

    K.Krishnaveni; J.Ravichandran; A.Selvaraj

    2013-01-01

    The Morinda tinctoria (MT) plant leaves extract was prepared in aqueous and hydrochloric acid media and was used as corrosion inhibitor for mild steel in hydrochloric acid medium.MT is found to be an efficient inhibitor at room temperature and the efficiency decreases with increase in temperature.Results from colorimetric studies predict the amount of iron present in the test solution and the percentage inhibition efficiency values calculated from this data fit well with the weight loss experiments.The AC impedance studies reveal that the mild steel surface is positively charged and the process of inhibition is through charge transfer.Polarisation studies indicate the mixed nature of the inhibitor.Thermodynamic parameters obtained predict that the process of inhibition is a spontaneous one.

  7. Effect of benzotriazole and phenyl-amino-triazine-dithiol on corrosion inhibition of copper in low-conductivity water

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, G.; Feng, Y. (Shanghai Inst. of Electric Power, Shanghai (People' s Republic of China)); Notoya, T. (Hokkaido Univ., Sapporo (Japan). Faculty of Engineering)

    1990-07-15

    Impedance measurements of copper electrodes in a low conductivity water (less than 10 {mu} S/cm) with the addition of either benzotriazole (BTA) or phenyl amino triazole dithiol (PTD) were performed. BTA inhibits copper corrosion better than PTD. Corrosion inhibition with PTD occurs only at concentrations above 10 ppm. A combination of BTA and PTD proved more effective than either used alone. The optimum ratio is 3 ppm BTA + 2 ppm PTD with the total amount of inhibitor 5 ppm. BTA may spread over the surface of copper electrodes and form a protective film consisting of a Cu BTA polymeric metwork. PTD may then plug the defects in the network on Cu/Cu {sub 2} O by forming the film. 12 refs, 8 figs.

  8. Influence of bacteria on film formation inhibiting corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Gunasekaran, G.; Chongdar, Shobhana; Gaonkar, S.N.; Kumar, Pradeep

    2004-08-01

    Mild steel coupons were incubated separately in two bacterial cultures namely Pseudomonas flava and Pseudomonas stutzeri. A significant reduction in the corrosion rate was observed in presence of P. flava. With a view to understand the mechanisms of microbially influenced corrosion/corrosion inhibition, various electrochemical and biological experiments such as weight change measurements and electrochemical impedance spectroscopy (EIS) measurements were made. The exposed surfaces were examined using scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDAX). The scraped surface film was also examined using FT-IR (Fourier transform infra red) spectroscopy. The results suggest that P. flava have enhancing effect on corrosion inhibitive properties of phosphate film.

  9. The Synergistic Effect of Iodide and Sodium Nitrite on the Corrosion Inhibition of Mild Steel in Bicarbonate–Chloride Solution

    Directory of Open Access Journals (Sweden)

    Gaius Debi Eyu

    2016-10-01

    Full Text Available The effect of potassium iodide (KI and sodium nitrite (NaNO2 inhibitor on the corrosion inhibition of mild steel in chloride bicarbonate solution has been studied using electrochemical techniques. Potentiodynamic polarisation data suggest that, when used in combination, KI and NaNO2 function together to inhibit reactions at both the anode and the cathode, but predominantly anodic. KI/NO2− concentration ratios varied from 2:1 to 2:5; inhibition efficiency was optimized for a ratio of 1:1. The surface morphology and corrosion products were analysed using scanning electron microscopy (SEM and X-ray diffractometry (XRD. The latter shows that the addition of I− to NO2 facilitates the formation of a passivating oxide (γ-Fe2O3 as compared to NO2− alone, decreasing the rate of metal dissolution observed in electrochemical testing. The synergistic effect of KI/NO2− inhibition was enhanced under the dynamic conditions associated with testing in a rotating disc electrode.

  10. Inhibiting effect of 2-mercaptobenzimidazole on the corrosion of Cu-30Ni alloy in aerated 3% NaCl in presence of ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Benmessaoud, M. [Laboratoire d' Electrochimie, des Etudes de Corrosion et d' Environnement, Faculte des Sciences, BP 133 Kenitra (Morocco); Es-salah, K. [Laboratoire d' Electrochimie, des Etudes de Corrosion et d' Environnement, Faculte des Sciences, BP 133 Kenitra (Morocco); Laboratoire de Physique des Liquides et Electrochimie, UPR15 du CNRS, Universite Paris VI, 4 Place Jussieu, 75252 Paris, Cedex 05 (France); Hajjaji, N. [Laboratoire d' Electrochimie, des Etudes de Corrosion et d' Environnement, Faculte des Sciences, BP 133 Kenitra (Morocco); Takenouti, H. [Laboratoire de Physique des Liquides et Electrochimie, UPR15 du CNRS, Universite Paris VI, 4 Place Jussieu, 75252 Paris, Cedex 05 (France); Srhiri, A. [Laboratoire d' Electrochimie, des Etudes de Corrosion et d' Environnement, Faculte des Sciences, BP 133 Kenitra (Morocco)], E-mail: benmessaoud_mma@yahoo.fr; Ebentouhami, M. [Laboratoire d' Electrochimie, des Etudes de Corrosion et d' Environnement, Faculte des Sciences, BP 133 Kenitra (Morocco)

    2007-10-15

    The inhibiting effect of 2-mercaptobenzimidazole (MBI) against Cu-30Ni alloy corrosion in aerated 3% NaCl polluted by ammonia, has been developed. Potentiodynamic and electrochemical impedance spectroscopy (EIS) measurements have been applied to determine the corrosion rate. scanning electron microscopy (SEM) studied surface morphology has been used to characterise electrode surface. The obtained results indicate that MBI acts as a good mixed-type inhibitor retarding the anodic and cathodic reactions. An increase of MBI concentration leads to a decrease of corrosion rate and inhibition efficiency increase.

  11. Synergistic effects of sodium lauroyl sarcosinate and glutamic acid in inhibition assembly against copper corrosion in acidic solution

    Science.gov (United States)

    Yu, Yinzhe; Zhang, Daquan; Zeng, Huijing; Xie, Bin; Gao, Lixin; Lin, Tong

    2015-11-01

    A self-assembled multilayer (SAM) from sodium lauroyl sarcosinate (SLS) and glutamic acid (GLU) is formed on copper surface. Its inhibition ability against copper corrosion is examined by electrochemical analysis and weight loss test. In comparison to SAM formed by just SLS or GLU, a synergistic effect is observed when the coexistence of SLS and GLU in SAM. The SLS/GLU SAM has an acicular multilayer structure, and SAM prepared under the condition of 5 mM SLS and 1 mM GLU shows the best protection efficiency. PM6 calculation reveals that the synergistic effect stems from interactions between SLS, GLU and cupric ions.

  12. Synergistic inhibition effect of L-phenylalanine and rare earth Ce(IV) ion on the corrosion of copper in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Daquan, E-mail: zhangdaquan@shiep.edu.cn [Department of Environmental Engineering, Shanghai University of Electric Power, Shanghai 200090 (China); Wu Huan; Gao Lixin [Department of Environmental Engineering, Shanghai University of Electric Power, Shanghai 200090 (China)

    2012-04-16

    Highlights: Black-Right-Pointing-Pointer Synergistic effect of L-phenylalanine (L-Phe) and Ce(SO{sub 4}){sub 2} on the corrosion of copper on the corrosion inhibition of copper in 0.5 M HCl solution. Black-Right-Pointing-Pointer Structure of the complex film formed by the interaction of L-phenylalanine (L-Phe) and Ce(SO{sub 4}){sub 2} on the copper surface. Black-Right-Pointing-Pointer Mechanism of the improvement of the inhibition property of amino acids by the addition of rare earth compound. - Abstract: The synergistic inhibition effect of L-phenylalanine (L-Phe) and Ce(SO{sub 4}){sub 2} on the corrosion of copper in 0.5 M HCl solution was investigated by weight-loss, electrochemical methods and surface analysis. The electrochemical results showed that L-Phe has definite inhibition effects for copper, while Ce(IV) promoted the anodic process of copper corrosion. The combination L-Phe with Ce(IV) ion produced strong synergistic effect on corrosion inhibition for copper. The maximum inhibition efficiency was 82.7% for 5 mM L-Phe + 2 mM Ce(IV). The results of EIS and potentiodynamic polarization are in good agreement. SEM showed that L-Phe and Ce(IV) can form a dense protective film on the copper surface.

  13. Research on Inhibition Effect of Multi-function Pickling Corrosion Inhibitor%多功能酸洗缓蚀剂缓蚀效果的研究

    Institute of Scientific and Technical Information of China (English)

    张晓冬; 喻果; 徐飞

    2016-01-01

    Hydrochloric acid pickling, sulfuric acid pickling, nitric acid pickling corrosion experiments of multifunctional pickling corrosion inhibitor developed by our company were carried out. The experimental results show that the multifunctional pickling corrosion inhibitor in hydrochloric acid pickling, sulfuric acid, nitric acid pickling process has very good inhibition effect for carbon steel and16 mn steel; different drug concentration has different corrosion inhibition effect. Multifunctional pickling corrosion inhibitor concentration commonly is 3‰~5‰, 10% hydrochloric acid pickling corrosion inhibition rate can reach 98.8%, 10% sulfuric acid pickling corrosion inhibition rate can reach 99.8%, 10% nitric acid pickling corrosion inhibition rate can reach 77%.%对威海翔宇环保科技股份有限公司研发的多功能酸洗缓蚀剂进行了盐酸酸洗、H2SO4 酸洗、硝酸酸洗缓蚀实验,实验结果表明,多功能酸洗缓蚀剂在盐酸酸洗、H2SO4酸洗、硝酸酸洗过程中对碳钢、16mn 钢都有很好的缓蚀效果,加药浓度不同,缓蚀效果不同.多功能酸洗缓蚀剂的加药浓度一般在 3‰~5‰,10%的盐酸酸洗的缓蚀率可达到 98.8%、10%的 H2SO4酸洗的缓蚀率可达到 99.8%、10%的硝酸酸洗的缓蚀率可达到 77%以上.

  14. Inhibition behavior for copper corrosion by photoelectrochemical methods

    Institute of Scientific and Technical Information of China (English)

    徐群杰; 周国定

    2003-01-01

    The application of photoelectrochemical methods in the inhibition effects for copper corrosion was described. The methods include cyclic voltammetry photocurrent measurements, intensity modulated photocurrent spectrum(IMPS) and laser-scanning photoelectrochemical microscopic method(PEM) which have been applied to the evaluation of inhibitors and inhibition behavior. The inhibition effect of BTA for copper corrosion is better than that of 4CBTA, 5CBTA, CBT-1, PTD, BT-250, CBTME and CBTBE at the same concentration. The inhibition mechanism of the derivatives of BTA with-COOH group(4CBTA, 5CBTA, CBT-1) is different from those with estergroup(CBTME, CBTBE).

  15. Effect of molecular structure of aniline-formaldehyde copolymers on corrosion inhibition of mild steel in hydrochloric acid solution.

    Science.gov (United States)

    Zhang, Yan; Nie, Mengyan; Wang, Xiutong; Zhu, Yukun; Shi, Fuhua; Yu, Jianqiang; Hou, Baorong

    2015-05-30

    Aniline-formaldehyde copolymers with different molecular structures have been prepared and investigated for the purpose of corrosion control of mild steel in hydrochloric acid. The copolymers were synthesized by a condensation polymerization process with different ratios of aniline to formaldehyde in acidic precursor solutions. The corrosion inhibition efficiency of as-synthesized copolymers for Q235 mild steel was investigated in 1.0 mol L(-1) hydrochloric acid solution by weight loss measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy, respectively. All the results demonstrate that as-prepared aniline-formaldehyde copolymers are efficient mixed-type corrosion inhibitors for mild steels in hydrochloric acid. The corrosion inhibition mechanism is discussed in terms of the role of molecular structure on adsorption of the copolymers onto the steel surface in acid solution.

  16. Synergistic inhibition effect of benzotriazole (BTA) and oxalate ions on the corrosion of copper, zinc and brass in NaCl and HCl solutions

    Energy Technology Data Exchange (ETDEWEB)

    Yanardag, T.; Aksut, A.A. [Ankara Univ., Science Faculty, Dept. of Chemistry, Ankara (Turkey)

    2009-07-01

    Inhibition of corrosion is of high technological importance and progress made in this field has been phenomenal in recent years. Zinc is more active compared to copper. Copper is a valuable material, especially in electronics, solar cell fittings, household products, structural engineering, art and decoration, coinage and biomedical application. Even though copper is corrosion resistant due to its natural oxide film, it is prone to corrode in solutions that contain oxygen and high concentration of chloride, sulphate, sulphide and nitrate ions. A variety of potentially damaging environments require versatile inhibition actions. Although an inhibitor is sometimes added to avoid tarnishing, in the majority of cases the inhibitor's purpose is to prevent or postpone corrosion attack. The corrosion inhibition of copper, zinc and brass in 0.5 M NaCl and 0.5 M HCl solutions in the presence of BTA and sodium oxalate have been investigated using polarization, AC-impedance and current-potential methods. Inhibition effect depends to the pretreatment of electrode. For this reason, the electrodes were pretreated in 0.15 M HCl solution for 20 seconds in order to obtain better surface prone to form coatings on the electrode surface before immersing into the studied solutions. Results showed BTA and oxalate to have synergistic inhibition effect on the corrosion of copper and brass. All the methods employed showed good correlation between each other revealing a mean efficiency of 99% in neutral medium and 88% in acidic medium for brass. (authors)

  17. Corrosion Inhibition Effect of 4-(2-Diethylamino-Ethylsulfonyl-Phthalonitrile and 4,5-Bis(Hexylsulfonyl-Phthalonitrile

    Directory of Open Access Journals (Sweden)

    Esma Sezer

    2011-01-01

    Full Text Available Inhibition of stainless steel corrosion in a 3.0 M NaCl solution by 4-(2-diethylamino-ethylsulfanyl-phthalonitrile (DAESPN and 4,5-bis(hexylsulfonyl-phthalonitrile (Bis-HSPN was investigated by polarization and electrochemical impedance spectroscopy (EIS measurements. The values of cathodic (βc and anodic (βa Tafel slopes, corr, corr, corrosion rate (CR, and inhibition efficiences (IE% obtained from polarization curves and polarization resistance (P, double-layer capacitance (dl, specific capacitance (sp values were obtained from EIS. Double-layer capacitance differences in the presence and absence of inhibitors were also obtained from EIS measurements as suggested in the literature in order to investigate the interaction of them with metal surface. Results show that both DAESPN and Bis-HSPN are effective in cathodic reaction. Impedance measurements suggest higher surface coverage for DAESPN. The interaction between the inhibitor and the stainless steel was investigated by the adsorption isotherm. Langmuir adsorption isotherm ads was applied and Δ values were obtained and found as 4.32×10−4, 1.17×10−4 and 9.2 kJ, 12.5 kJ for DAESPN and Bis-HSPN, respectively, which suggests the electrostatic interaction between charged metal surface and charged organic molecules.

  18. Investigation of adsorption and inhibitive effect of acid red GRE (183 dye on the corrosion of carbon steel in hydrochloric acid media

    Directory of Open Access Journals (Sweden)

    M. Abd El-raouf

    2015-09-01

    Full Text Available The adsorption and corrosion inhibitive effect of acid red GRE (183 dye on carbon steel alloy in 1 M HCl solutions was studied using various techniques. Results of weight loss, Tafel polarization measurements and electrochemical impedance spectroscopy (EIS techniques show that this compound has fairly good inhibiting properties for steel corrosion in acidic bath; with efficiency around 96% at a concentration of 50 ppm. The inhibition is of a mixed anodic–cathodic nature. Factors affecting the corrosion process have been calculated and discussed. Acid red GRE (183 dye was shown to be an inhibitor in the acidic corrosion. Inhibition efficiency increased with acid red GRE (183 dye concentration but decreased with rise in temperature, corrosion inhibition is attributed to the adsorption of acid red GRE (183 dye on the carbon steel surface via a physical adsorption mechanism. Langmuir isotherm is found to provide an accurate description of the adsorption behavior of the investigated azo compound. The nature of the protective film was investigated using SEM and EDX techniques.

  19. Inhibition effect of 2-amino-5-ethyl-1, 3, 4-thiadiazole on corrosion behaviour of austenitic stainless steel type 304 in dilute HCl solution

    Institute of Scientific and Technical Information of China (English)

    Roland T Loto; Cleophas A Loto; Abimbola P Popoola; Tatiana Fedotova

    2016-01-01

    The corrosion inhibition of type 304 austenitic stainless steel by 2-amino-5-ethyl-1, 3, 4-thiadiazole (TTD) compound and the electrochemical behaviour in dilute HCl solution were investigated through potentiodynamic polarization test, mass loss techniques and potential measurements. The results show that the organic derivative is highly effective with a maximum inhibition efficiency of 70.22% from mass loss analysis, while 74.2% is obtained from polarization tests. Observation of the scanning electron micrographs shows the absence of corrosion products due to electrochemical influence of TTD on the surface morphology of the steel. X-ray diffractometry reveals the absence of phase compounds and complexes on the steel samples after exposure. TTD adsorption on the steel surface obeys the Langmuir, Frumkin and Freundlich adsorption isotherms. Corrosion thermodynamic calculations reveal the inhibition mechanism occurs through chemisorption process and results from statistical analysis depict the strong influence of inhibitor concentration on the electrochemical performance of the TTD.

  20. Encapsulated Multifunction Corrosion Inhibitive Primer.

    Science.gov (United States)

    1983-11-01

    Tec #19 (alkaline detergent), scrubbed vigorously with cheese cloth, then perform R.I.A. drop test for cleanliness (ASTM 7.1.6.22) (Turco Air Tec...Systems, DOE/NASA TM-78180 (1978). 39. Gouda , V.K. and Shater, M.A., Corrosion Sci. 15 199 (1975). 40. Controlled release, Pesticide Symposium 41

  1. Corrosion inhibition for distillation apparatus

    Science.gov (United States)

    Baumert, Kenneth L.; Sagues, Alberto A.; Davis, Burtron H.; Schweighardt, Frank K.

    1985-01-01

    Tower material corrosion in an atmospheric or sub-atmospheric distillation tower in a coal liquefaction process is reduced or eliminated by subjecting chloride-containing tray contents to an appropriate ion-exchange resin to remove chloride from such tray contents materials.

  2. Inhibition Effects of a Synthesized Novel 4-Aminoantipyrine Derivative on the Corrosion of Mild Steel in Hydrochloric Acid Solution together with Quantum Chemical Studies

    Directory of Open Access Journals (Sweden)

    Abu Bakar Mohamad

    2013-06-01

    Full Text Available 1,5-Dimethyl-4-((2-methylbenzylideneamino-2-phenyl-1H-pyrazol-3(2H-one (DMPO was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS, potentiodynamic polarization, open circuit potential (OCP and electrochemical frequency modulation (EFM. The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively and dipole moment (μ were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.

  3. Inhibition effects of a synthesized novel 4-aminoantipyrine derivative on the corrosion of mild steel in hydrochloric acid solution together with quantum chemical studies.

    Science.gov (United States)

    Junaedi, Sutiana; Al-Amiery, Ahmed A; Kadihum, Abdulhadi; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2013-06-04

    1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.

  4. Corrosion

    Science.gov (United States)

    Slabaugh, W. H.

    1974-01-01

    Presents some materials for use in demonstration and experimentation of corrosion processes, including corrosion stimulation and inhibition. Indicates that basic concepts of electrochemistry, crystal structure, and kinetics can be extended to practical chemistry through corrosion explanation. (CC)

  5. Corrosion

    Science.gov (United States)

    Slabaugh, W. H.

    1974-01-01

    Presents some materials for use in demonstration and experimentation of corrosion processes, including corrosion stimulation and inhibition. Indicates that basic concepts of electrochemistry, crystal structure, and kinetics can be extended to practical chemistry through corrosion explanation. (CC)

  6. Inhibitive Effect by Acid Extract of Ficus Exasperata Leaves on the Sulphuric Acid Corrosion of Mild Steel

    Directory of Open Access Journals (Sweden)

    N. S. Patel

    2009-01-01

    Full Text Available Extract of Ficus exasperata leaves was investigated as corrosion inhibitor of mild steel in 1 N H2SO4 using conventional weight loss, electrochemical polarizations, electrochemical impedance spectroscopy and scanning electron microscopic studies. The weight loss results showed that the extract of Ficus exasperata is excellent corrosion inhibitor. Electrochemical polarizations data revealed the mixed mode of inhibition. The results of electrochemical impedance spectroscopy shows that the change in the impedance parameters, charge transfer resistance and double layer capacitance, with the change in concentration of the extract is due to the adsorption of active molecules leading to the formation of a protective layer on the surface of mild steel. Scanning electron microscopic studies provided the confirmatory evidence of improved surface condition, due to the adsorption, for the corrosion protection.

  7. Effect of Piperidin-4-ones on the Corrosion Inhibition of Mild Steel in 1 N H2SO4

    Directory of Open Access Journals (Sweden)

    Glory Tharial Xavier

    2015-01-01

    Full Text Available The corrosion inhibition of mild steel in 1 N sulphuric acid solution by 2,6-diphenylpiperidin-4-ones with various substituents at 3- and 3,5-positions (01–06 has been tested by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopic methods, and FTIR and UV absorption spectra. The surface morphology of the mild steel specimen has been analyzed by SEM. The effect of temperature (300 to 323 ± 1 K on the corrosion behavior of mild steel in the presence of the inhibitors (01–06 was studied using weight loss techniques. The effect of anions (Cl−, Br−, and I− on the corrosion behavior of mild steel in the presence of the same inhibitors was also studied by weight loss method and the synergism parameters were calculated. The adsorption characteristics of the inhibitors have been determined from the results.

  8. Corrosion inhibition of carbon steel by sodium metavanadate

    Directory of Open Access Journals (Sweden)

    VIJAYA GOPAL SRIBHARATHY

    2012-08-01

    Full Text Available The inhibition efficiency of sodium metavanadate (SMV-adipic acid (AA system in controlling corrosion of carbon steel in an aqueous solution containing 60 ppm of Cl- has been evaluated by weight-loss method; 250 ppm of SMV exhibits inhibition efficiency of 56 %. Addition of adipic acid to SMV improves the inhibition efficiency of the system. The formulation consisting of 250 ppm of SMV and 250 ppm of adipic acid has inhibition efficiency of 98 %. A synergistic effect exists between SMV and adipic acid with the synergism parameters greater than 1. Mecha¬nistic aspects of corrosion inhibition have been studied by electrochemical methods like potentiodynamic polarization and electrochemical impedance spectroscopy. FTIR spectra reveal that the protective film consists of Fe2+-SMV complex and Fe2+-adipic acid complex. The protective film has been analyzed by fluorescence spectra, SEM and EDAX.

  9. Synergistic effect of iodide ions on the corrosion inhibition of steel in 0.5 M H 2SO 4 by new chalcone derivatives

    Science.gov (United States)

    Bouklah, M.; Hammouti, B.; Aouniti, A.; Benkaddour, M.; Bouyanzer, A.

    2006-07-01

    The effect of addition of 4',4-dihydroxychalcone (P 1), 4-aminochalcone (P 2) and 4-bromo, 4'-methoxychalcone (P 3) on the corrosion of steel in 0.5 M sulphuric acid has been studied by weight loss measurements, potentiodynamic and EIS measurements. We investigate the synergistic effect of iodide ions on the corrosion inhibition of steel in the presence of chalcone derivatives. The corrosion rates of the steel decrease with the increase of the chalcones concentration, while the inhibition efficiencies increase. The addition of iodide ions enhances the inhibition efficiency considerably. The presence of iodide ions increases the degree of surface coverage. The synergism parameters SΘ and SI, calculated from surface coverage and the values of inhibition efficiency, in the case of chalcone derivatives are found to be larger than unity. The enhanced inhibition efficiency in the presence of iodide ions is only due to synergism and there is a definite contribution from the inhibitors molecules. E (%) obtained from the various methods is in good agreement. Polarisation measurements show also that the compounds act as cathodic inhibitors.

  10. Fouling and the inhibition of salt corrosion. [hot corrosion of superalloys

    Science.gov (United States)

    Deadmore, D. L.; Lowell, C. E.

    1980-01-01

    In an attempt to reduce fouling while retaining the beneficial effects of alkaline earth inhibitors on the hot corrosion of superalloys, the use of both additives and the intermittent application of the inhibitors were evaluated. Additions of alkaline earth compounds to combustion gases containing sodium sulfate were shown to inhibit hot corrosion. However, sulfate deposits can lead to turbine fouling in service. For that reason, dual additives and intermittant inhibitor applications were evaluated to reduce such deposit formation. Silicon in conjunction with varium showed some promise. Total deposition was apparently reduced while the inhibition of hot corrosion by barium was unimpaired. The intermittant application of the inhibitor was found to be more effective and controllable.

  11. Synergistic effect of tartaric acid with 2,6-diaminopyridine on the corrosion inhibition of mild steel in 0.5 M HCl

    Science.gov (United States)

    Qiang, Yujie; Guo, Lei; Zhang, Shengtao; Li, Wenpo; Yu, Shanshan; Tan, Jianhong

    2016-09-01

    The inhibitive ability of 2,6-diaminopyridine, tartaric acid and their synergistic effect towards mild steel corrosion in 0.5 M HCl solution was evaluated at various concentrations using potentiodynamic polarization measurements, electrochemical impedance spectroscopy (EIS), and weight loss experiments. Corresponding surfaces of mild steel were examined by atomic force microscope (AFM), field emission scanning electron microscope (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) analysis. The experimental results are in good agreement and reveal a favorable synergistic effect of 2,6-diaminopyridine with tartaric acid, which could protect mild steel from corrosion effectively. Besides, quantum chemical calculations and Monte Carlo simulation were used to clarify the inhibition mechanism of the synergistic effect.

  12. Corrosion Chemistry in Inhibited HDA.

    Science.gov (United States)

    1980-11-30

    Titanium and chromium have sufficiently low Flade potentials to pass- ivate in non-oxidising acids, but Iron will only exhibit self-passivity if the...inhibition e.g. involving organic and pickling inhibitors* the rest potential can actually 4.5,4.6become more negative " This is due to cathodic rather...media. 321 stainless steel, titanium stabilised, was the particular steel studied, being very similar in composition to the 347also stainless steel

  13. A novel triazole-based cationic gemini surfactant: synthesis and effect on corrosion inhibition of carbon steel in hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Qiu Lingguang [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China)]. E-mail: lgahu@163.com; Xie Anjian [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China); Shen Yuhua [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China)

    2005-06-15

    A triazole-based cationic gemini surfactant, 3,5-bis(methylene octadecyl dimethylammonium chloride)-1,2,4-triazole (18-triazole-18) has been synthesized, and its effect on corrosion inhibition of A{sub 3} steel in 1 M HCl has been studied using the weight-loss method. The result showed that 18-triazole-18 acted as an excellent inhibitor in 1 M HCl. It was found that the adsorption mechanism of 18-triazole-18 on the steel surface in acid medium was quite different from that of cationic gemini surfactants containing dimethylene as a spacer, as well as that of conventional cationic single-chained surfactants, which is due to unique molecular structure of 18-triazole-18. 18-Triazole-18 may be adsorbed on the steel surface in acid medium through a maximum of four atoms or groups, i.e., the two nitrogen atoms of triazole ring and two quaternary ammonium head groups. Four regions of surfactant concentration could be divided to illustrate the adsorption of 18-triazole-18 on the steel surface, and four different adsorption mechanisms may take place in different regions of surfactant concentration.

  14. The Inhibitive Effect of 2-Phenyl-3-nitroso-imidazo [1, 2-a]pyridine on the Corrosion of Steel in 0.5 M HCl Acid Solution

    Directory of Open Access Journals (Sweden)

    K. Bouhrira

    2010-01-01

    Full Text Available The effect of 2-phenyl-3-nitroso-imidazo[1,2-a]pyridine (PNIP on the corrosion inhibition of carbon-steel in 0.5 M HCl was studied by weight loss and different electrochemical techniques such as electrochemical impedance spectroscopy (EIS, potentiodynamic polarization. The obtained results showed that PNIP effectively reduces the corrosion rate of carbon steel. Inhibition efficiency (E% increases with inhibitor concentration to attain 88% at 10-3 M. Adsorption of that PNIP on the carbon steel surface in 0.5 M HCl follows the Langmuir isotherm model. E% values obtained from various methods used are in good agreement. SEM characterization of the steel surface is made.

  15. Corrosion inhibition property of polyester-groundnut shell biodegradable composite.

    Science.gov (United States)

    Sounthari, P; Kiruthika, A; Saranya, J; Parameswari, K; Chitra, S

    2016-12-01

    The use of natural fibers as reinforcing materials in thermoplastics and thermoset matrix composites provide optimistic environmental profits with regard to ultimate disposability and better use of raw materials. The present work is focused on the corrosion inhibition property of a polymer matrix composite produced by the use of groundnut shell (GNS) waste. Polyester (PE) was synthesized by condensation polymerization of symmetrical 1,3,4-oxadiazole and pimelic acid using sodium lauryl sulfate as surfactant. The polyester-groundnut shell composite (PEGNS) was prepared by ultrasonication method. The synthesized polyester-groundnut shell composite was characterized by FT-IR, TGA and XRD analysis. The corrosion inhibitory effect of PEGNS on mild steel in 1M H2SO4 was investigated using gravimetric method, electrochemical impedance spectroscopy, potentiodynamic polarization, atomic absorption spectroscopy and scanning electron microscopy. The results showed that PEGNS inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration and decrease with increasing temperature. The composite inhibited the corrosion of mild steel through adsorption following the Langmuir adsorption isotherm. Changes in the impedance parameters Rt, Cdl, Icorr, Ecorr, ba and bc suggested the adsorption of PEGNS onto the mild steel surface, leading to the formation of protective film.

  16. Synthesis and characterization of an effective organic/inorganic hybrid green corrosion inhibitive complex based on zinc acetate/Urtica Dioica

    Science.gov (United States)

    Salehi, E.; Naderi, Reza; Ramezanzadeh, B.

    2017-02-01

    This study aims at synthesis and characterization of an effective corrosion inhibitive complex based on zinc acetate/Urtica Dioica (ZnA-U.D) for corrosion protection of mild steel in chloride solution. The chemical structure and morphology of the complex were characterized by Fourier transform infrared spectroscopy (FT-IR), UV-vis, thermal gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The corrosion protection performance of the mild steel samples dipped in 3.5 wt.% NaCl solutions with and without ZnA-U.D extract was investigated by visual observations, open circuit potential (OCP) measurements, electrochemical impedance spectroscopy (EIS) and polarization test. Results revealed that the ZnA successfully chelated with organic inhibitive compounds (i.e Quercetin, Quinic acid, Caffeic acid, Hystamine and Serotonin) present in the U.D extract. The electrochemical measurements revealed the effective inhibition action of ZnA-U.D complex in the sodium chloride solution on the mild steel. The synergistic effect between Zn2+ and organic compounds present in the U.D extract resulted in protective film deposition on the steel surface, which was proved by SEM and XPS analyses.

  17. Biofilms: strategies for metal corrosion inhibition employing microorganisms.

    Science.gov (United States)

    Zuo, Rongjun

    2007-10-01

    Corrosion causes dramatic economic loss. Currently widely used corrosion control strategies have disadvantages of being expensive, subject to environmental restrictions, and sometimes inefficient. Studies show that microbial corrosion inhibition is actually a common phenomenon. The present review summarizes recent progress in this novel strategy: corrosion control using beneficial bacteria biofilms. The possible mechanisms may involve: (1) removal of corrosive agents (such as oxygen) by bacterial physiological activities (e.g., aerobic respiration), (2) growth inhibition of corrosion-causing bacteria by antimicrobials generated within biofilms [e.g., sulfate-reducing bacteria (SRB) corrosion inhibition by gramicidin S-producing Bacillus brevis biofilm], (3) generation of protective layer by biofilms (e.g., Bacillus licheniformis biofilm produces on aluminum surface a sticky protective layer of gamma-polyglutamate). Successful utilization of this novel strategy relies on advances in study at the interface of corrosion engineering and biofilm biology.

  18. Corrosion Inhibition Synergism between Lanthanum(Ⅲ) Ion and 8-Hydroxyquinoline for Zinc in Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    木冠南; 唐丽斌; 李学铭

    2002-01-01

    The effects of La3+ ion and chelate reagent 8-hydroxyquinoline on the corrosion rate of zinc in hydrochloric acid were investigated by using weight loss method and electrochemical method. It is found that in a specific concentration range of La3+ ion and 8-hydroxyquinoline, the obvious corrosion inhibition synergism is obtained. The mechanism of corrosion inhibition synergism was discussed on basis of adsorption theory.

  19. Comparative Corrosion Inhibition Effect of Imidazole Compounds and of Trichodesma indicum (Linn R. Br. on C38 Steel in 1 M HCl Medium

    Directory of Open Access Journals (Sweden)

    S. Alarmal Mangai

    2013-01-01

    Full Text Available Corrosion inhibition effect of alkaloid extract part of the plant Trichodesma indicum (Linn R. Br. of Boraginaceae family was studied and compared with that of imidazole compounds (imidazole, benzimidazole on C38 steel in 1 M HCl solution by weight loss method at various temperatures. The study showed that the alkaloid part of the plant extract acts as a better inhibitor in comparison to the selected organic inhibitors. The maximum inhibition efficiency of the extract of Trichodesma indicum R. Br. was found to be 94.5% at a concentration of 75 mg/L at 30°C.

  20. A Review of CO2 Corrosion Inhibition by Imidazoline-based Inhibitor

    Directory of Open Access Journals (Sweden)

    Jaal Rafida Ahmad

    2014-07-01

    Full Text Available Carbon dioxide (CO2 corrosion is one of the most significant forms of attack in the oil and gas production and transportation systems. Corrosion inhibitors have been widely used in an effort to reduce the detrimental effect of the corrosion process. Different types of corrosion inhibitors have been applied for this purpose. The most frequent is the imidazoline-based inhibitors (IM, owing to their good adsorption characteristics and film-forming capability. Albeit their extensive use, their inhibition mechanism is not fully understood. This paper highlights the inhibition mechanism of IM and also the factors that contribute to its inhibition mechanism.

  1. Synthesis of Four Triazole Compounds and Their Corrosion Inhibitive Effect on Carbon Steel in Hydrochloric Acid Medium

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiao-Ru; XU Min-Hua; ZHANG Shu-Sheng

    2008-01-01

    Four new 1,2,3-triazoles (3a, 3b, 4a and 4b) have been synthesized selectively via click chemistry approach and characterized by elemental analysis, IR, 1H NMR, 13C NMR and single crystal X-ray crystallographic analysis. The inhibiting action of these compounds against the corrosion of carbon steel in 1.0 mol/L HCI solution was investigated by electrochemical techniques including polarization and electrochemical impedance spectroscopy (EIS), both results of which indicate that these compounds act as good anodic inhibitors. The electrochemical study also shows that 4b is the best inhibitor among the four compounds in this work and its efficiency increases with concentration.The obtained highest IE (inhibition efficiency) of 4b is around 97%.

  2. Corrosion inhibition of copper with benzotriazole and other organic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Y.; Guan, Y.; Han, K.N. [South Dakota School of Mines and Technology, Rapid City, SD (United States). Dept. of Metallurgical Engineering

    1995-05-01

    The corrosion behavior of copper with various organic inhibitors in aerated solutions at pH 1 to pH 2 was studied using a potentiostat. The inhibitors studied included benzotriazole (BTAH), hydroxy benzophenoximes, L-hydroxy-5-nonylacetophenone oxime, and sodium octyl hydroxamate (SOH). BTAH was shown to be the most effective of the inhibitors tested. Morphology of the copper substrate after corrosion in the presence and absence of BTAH was examined using scanning electron microscopy (SEM). Fourier transform infrared spectroscopy (FTIR) was used to identify the spectra of the adsorbed complexes (BTA). The surface film was identified as a polymeric Cu(I)-BTA complex that totally covered the copper surface, exhibiting strong corrosion inhibition. The formation of Cu(I)-BTA was found to have been accomplished after the adsorption of BTAH on the copper surface. The effect of annealing of copper plate on the rate of corrosion also was investigated, and results indicated that the annealed copper exhibited better corrosion resistance than copper plate that had not been annealed.

  3. Investigation of the inhibitive effect of N-phosphono-methyl-glycine on the corrosion of carbon steel in neutral solutions by electrochemical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Pech-Canul, M.A.; Chi-Canul, L.P. [CHINVESTAV-IPN-Merida (Mexico). Dept. de Fisica Aplicada

    1998-12-31

    Steady-state current-voltage curves for various disk rotation rates were combined with electrochemical impedance measurements in order to investigate the corrosion inhibition of carbon steel by N-phosphono-methyl-glycine (NPMG)/Zn{sup 2+} mixtures with a concentration ratio of 1:1 between NPMG and zinc cations, in a model water. The efficiency of the NPMG/Zn{sup 2+} combination increases with concentration in the range 10--100 ppm, and it acts as a mixed type inhibitor, affecting both the anodic and cathodic reactions. The corrosion behavior in all the metal/environments investigated is characterized by the formation of a 3-D porous layer which tends to hinder the diffusion of oxygen. Such layer consists of corrosion products in the blank solution and of corrosion products and/or inhibitors in the presence of the NPMG/Zn{sup 2+} mixture. The impedance response of such layers depends on inhibitor concentration, exposure time and rotation rate of the disk. From electrochemical impedance measurements it was found that the oxygen reduction reaction is under mixed activation diffusion control. It was shown by both steady-state and impedance measurements that there is a significant effect of rotation speed on the anodic reaction.

  4. Adsorption isotherm and inhibition effect of a synthesized di-(m-Formylphenol)-1,2-cyclohexandiimine on corrosion of steel X52 in HCl solution

    Institute of Scientific and Technical Information of China (English)

    A karimi; I Danaee; H Eskandari; M RashvanAvei

    2016-01-01

    The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spectroscopy and chronoamperometry measurements. All electrochemical measurements suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25 °C to 65 °C. It is found that the adsorption of this inhibitor follows the Langmuir adsorption isotherms. The value of activation energy and the thermodynamic parameters such asΔHads,ΔSads,Kads andΔGads were calculated by the corrosion currents at different temperatures using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of inhibitor was examined by scanning electron microscopy (SEM) images.

  5. Corrosion Inhibition by – Phthalic Acid - Zn2+ System

    Directory of Open Access Journals (Sweden)

    R. Mohan

    2014-05-01

    Full Text Available The inhibition effect of Phthalic acid(PA – Zn2+ system controls the corrosion of carbon steel has been studied by weight – loss method. The weight – loss study reveals that the formulation consisting of 60 ppm of Zn2+, 50 ppm of phthalic acid has 82 % inhibition efficiency. Synergistic effect exists between phthalic acid- Zn2+ system. The influence of N-cetyl- N, N, N-trimethylammonium bromide(CTAB on the PA- Zn2+ system control the microbial corrosion. The value of the separation factor, RL indicated the phthalic acid- Zn2+ system was favorable adsorption. The Adsorption equilibrium exhibited better fit to Langmuir isotherm than Freundlich isotherm. The protective film consists of Fe2+ - Phthalic acid and Zn(OH2 by FTIR spectroscopy.

  6. Study of Temperature Effect on the Corrosion Inhibition of C38 Carbon Steel Using Amino-tris(Methylenephosphonic Acid in Hydrochloric Acid Solution

    Directory of Open Access Journals (Sweden)

    Najoua Labjar

    2011-01-01

    Full Text Available Tafel polarization method was used to assess the corrosion inhibitive and adsorption behaviours of amino-tris(methylenephosphonic acid (ATMP for C38 carbon steel in 1 M HCl solution in the temperature range from 30 to 60∘C. It was shown that the corrosion inhibition efficiency was found to increase with increase in ATMP concentration but decreased with temperature, which is suggestive of physical adsorption mechanism. The adsorption of the ATMP onto the C38 steel surface was found to follow Langmuir adsorption isotherm model. The corrosion inhibition mechanism was further corroborated by the values of kinetic and thermodynamic parameters obtained from the experimental data.

  7. Corrosion Inhibition of High Speed Steel by Biopolymer HPMC Derivatives

    OpenAIRE

    Shih-Chen Shi; Chieh-Chang Su

    2016-01-01

    The corrosion inhibition characteristics of the derivatives of biopolymer hydroxypropyl methylcellulose (HPMC), hydroxypropyl methylcellulose phthalate (HPMCP), and hydroxypropyl methylcellulose acetate succinate (HPMCAS) film are investigated. Based on electrochemical impedance spectroscopic measurements and potentiodynamic polarization, the corrosion inhibition performance of high speed steel coated with HPMC derivatives is evaluated. The Nyquist plot and Tafel polarization demonstrate prom...

  8. Corrosion Inhibition Effect of Furfural on Carbon Steel%糠醛对碳钢缓蚀性能的研究

    Institute of Scientific and Technical Information of China (English)

    刘峥

    2001-01-01

    The corrosion inhibition effect of furfural on the carbon steel was studied by weightloss method. It was shown that the furfural had strong corrosion inhibition effect on carbon steel in 5% HCl solution at 30 ℃. A strong synergistic effect was observed while using both furfural and sexamethyltetraamine as inhibitors. The inhibition mechanism was discussed by the authors.%采用失重法研究了糠醛对碳钢的缓蚀性能。实验表明30 ℃,4 h条件下,在5% 的盐酸中,糠醛具有较强的缓蚀作用,与六次甲基四胺复配缓蚀效果增强。通过研究找到了糠醛在碳钢上的吸附等温式,计算出碳钢溶解的表观活化能,研究了糠醛在碳钢上的吸附机理。研究表明糠醛为混合控制型缓蚀剂。

  9. Structure effect of some amine derivatives on corrosion inhibition efficiency for carbon steel in acidic media using electrochemical and Quantum Theory Methods

    Directory of Open Access Journals (Sweden)

    Ahmed M. Al-Sabagh

    2013-06-01

    Full Text Available The structure effect on corrosion inhibition of two amines and their derivatives is the main object of this article. The first amine was 1,8-diaminooctane and its ethoxylated (50 e.o. 1,8-diaminooctane and propoxylated (50 p.o. 1,8-diaminooctane. The second amine is the tetraethylenepentamine and its ethoxylated (50 e.o. and propoxylated (50 p.o. derivatives. The investigations were carried out by open circuit potential, potentiodynamic polarization, electrochemical impedance, quantum calculations and SEM measurements. The data obtained for the first amine showed the minimum inhibition efficiency (65.5%, meanwhile the maximum inhibition efficiency was 78.9% for its propoxylated derivative. On the other hand the maximium inhibition efficiency was 91% for the second propoxylated amine. The electronic properties; HOMO and LUMO energy levels, energy gap, dipole moment, polarizability, log P, total energy, charge densities, area/molecule and hydration energy have been calculated. The inhibition efficiency was calculated theoretically using the electronic parameters. From the obtained results, there is a significant difference between the inhibition efficiency of the electronic and the inhibition efficiency experimentally. The results were discussed on the light of the chemical structure of the used inhibitors. In general, the inhibition efficiency is affected by the shape and structure of the molecule.

  10. Corrosion Inhibition of High Speed Steel by Biopolymer HPMC Derivatives

    Directory of Open Access Journals (Sweden)

    Shih-Chen Shi

    2016-07-01

    Full Text Available The corrosion inhibition characteristics of the derivatives of biopolymer hydroxypropyl methylcellulose (HPMC, hydroxypropyl methylcellulose phthalate (HPMCP, and hydroxypropyl methylcellulose acetate succinate (HPMCAS film are investigated. Based on electrochemical impedance spectroscopic measurements and potentiodynamic polarization, the corrosion inhibition performance of high speed steel coated with HPMC derivatives is evaluated. The Nyquist plot and Tafel polarization demonstrate promising anti-corrosion performance of HPMC and HPMCP. With increasing film thickness, both materials reveal improvement in corrosion inhibition. Moreover, because of a hydrophobic surface and lower moisture content, HPMCP shows better anti-corrosion performance than HPMCAS. The study is of certain importance for designing green corrosion inhibitors of high speed steel surfaces by the use of biopolymer derivatives.

  11. Corrosion inhibition of powder metallurgy Mg by fluoride treatments.

    Science.gov (United States)

    Pereda, M D; Alonso, C; Burgos-Asperilla, L; del Valle, J A; Ruano, O A; Perez, P; Fernández Lorenzo de Mele, M A

    2010-05-01

    Pure Mg has been proposed as a potential degradable biomaterial to avoid both the disadvantages of non-degradable internal fixation implants and the use of alloying elements that may be toxic. However, it shows excessively high corrosion rate and insufficient yield strength. The effects of reinforcing Mg by a powder metallurgy (PM) route and the application of biocompatible corrosion inhibitors (immersion in 0.1 and 1M KF solution treatments, 0.1M FST and 1M FST, respectively) were analyzed in order to improve Mg mechanical and corrosion resistance, respectively. Open circuit potential measurements, polarization techniques (PT), scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS) were performed to evaluate its corrosion behavior. SECM showed that the local current of attacked areas decreased during the F(-) treatments. The corrosion inhibitory action of 0.1M FST and 1M FST in phosphate buffered solution was assessed by PT and EIS. Under the experimental conditions assayed, 0.1M FST revealed better performance. X-ray photoelectron spectroscopy, energy dispersive X-ray and X-ray diffraction analyses of Mg(PM) with 0.1M FST showed the presence of KMgF(3) crystals on the surface while a MgF(2) film was detected for 1M FST. After fluoride inhibition treatments, promising results were observed for Mg(PM) as degradable metallic biomaterial due to its higher yield strength and lower initial corrosion rate than untreated Mg, as well as a progressive loss of the protective characteristics of the F(-)-containing film which ensures the gradual degradation process.

  12. Inhibition of the Cu65/Zn35 brass corrosion by natural extract of Camellia sinensis

    Energy Technology Data Exchange (ETDEWEB)

    Ramde, Tambi, E-mail: t_ramde@univ-ouaga.bf [Equipe Chimie Physique et Electrochimie, Laboratoire de Chimie Moléculaire et des Matériaux, Université de Ouagadougou, 03 BP 7021 Ouagadougou 03 (Burkina Faso); Department of Industrial Engineering, University of Trento, via Sommarive 9, 38123 Trento (Italy); Rossi, Stefano; Zanella, Caterina [Department of Industrial Engineering, University of Trento, via Sommarive 9, 38123 Trento (Italy)

    2014-07-01

    In this work, the corrosion inhibition of brass was studied using natural plant extract, Camellia sinensis, in 0.1 M Na2SO4 solutions with pH 7 and pH 4. Electrochemical techniques (potentiodynamic polarization, electrochemical impedance spectroscopy) and scanning electron microscopy (SEM) were applied to study the brass corrosion behavior in presence and absence of the extract. The results indicated that the extract is a very effective corrosion inhibitor for brass corrosion process in both the acidic and neutral media by virtue of adsorption. The inhibition effect increases by time as demonstrated by the EIS monitoring for 120 h. In the blank solution the corrosion process leads to the formation of a dark oxide patina at pH 7 and induces localized corrosion morphology at pH 4. The extract presence can avoid both the dark patina and the pits formation.

  13. Electrochemical, quantum chemical and SEM investigation of the inhibiting effect and mechanism of ciprofloxacin, norfloxacin and ofloxacin on the corrosion for mild steel in hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    PANG XueHui; GUO Wenduan; LI WeiHua; XIE dianDong; HOU BaoRong

    2008-01-01

    The inhibiting effect and mechanism of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylicacid(ciprofloxacin), 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (norfloxacin) and (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7oxo-7 H-pyrido(1,2,3-de)-1,4-benzoxazine-6 carboxylic acid (ofloxacin) on the corrosion of mild steel in 1 mol/L HCl have been studied using electrochemical method, quantum chemical method and SEM at 303 K. The potentiodynamic results showed that these compounds suppressed both cathodic and anodic processes of mild steel corrosion in 1 mol/L HCl. The impedance spectroscopy showed that Rp values increased, and Cdl values decreased with the rising of the working concentration. Quantum chemical calculation showed that there was a positive correlation between some inhibitors structure properties and the inhibitory efficiency. The inhibitors function through adsorption followed Langmuir isotherm, and chemisorption made more contribution to the adsorption of the inhibitors on the steel surface compared with physical adsorption. SEM analysis suggested that the metal had been protected from aggressive corrosion because of the addition of the inhibitors.

  14. Electrochemical, quantum chemical and SEM investigation of the inhibiting effect and mechanism of ciprofloxacin, norfloxacin and ofloxacin on the corrosion for mild steel in hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The inhibiting effect and mechanism of 1-cyclopropyl-6-fluoro-1,4-dihydro -4-oxo-7-(1-piperazinyl) -3- quinoline carboxylicacid(ciprofloxacin), 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (norfloxacin) and (?)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7- oxo-7 H-pyrido(1,2,3-de)-1,4- benzoxazine-6 carboxylic acid (ofloxacin) on the corrosion of mild steel in 1 mol/L HCl have been studied using electrochemical method, quantum chemical method and SEM at 303 K. The potentiodynamic results showed that these compounds suppressed both cathodic and an-odic processes of mild steel corrosion in 1 mol/L HCl. The impedance spectroscopy showed that Rp values increased, and Cdl values decreased with the rising of the working concentration. Quantum chemical calculation showed that there was a positive correlation between some inhibitors structure properties and the inhibitory efficiency. The inhibitors function through adsorption followed Langmuir isotherm, and chemisorption made more contribution to the adsorption of the inhibitors on the steel surface compared with physical adsorption. SEM analysis suggested that the metal had been protected from aggressive corrosion because of the addition of the inhibitors.

  15. Corrosion inhibition of steel in concrete by carboxylic acids

    Energy Technology Data Exchange (ETDEWEB)

    Sagoe-Crentsil, K.K.; Glasser, F.P. (Univ. of Aberdeen, Old Aberdeen (United Kingdom). Dept. of Chemistry); Yilmaz, V.T. (Ondokuz Mayis Univ., Samsun (Turkey))

    1993-11-01

    Water soluble carboxylic acids have been used as corrosion inhibitors. They remain largely soluble after curing in cement for up to 90d. Corrosion current measurements are presented showing malonic acid, a dicarboxylic acid, to be a very effective corrosion inhibitor even in the presence of 2.5 wt % chloride. Unfortunately, it has an initial retarding effect on the set of Portland cement. The investigation suggests that corrosion inhibitors based on carboxylic acids remain a fruitful field of investigation.

  16. Electrochemical and Corrosion Inhibition Studies of Cucurbita Maxima

    Directory of Open Access Journals (Sweden)

    K. Anbarasi

    2016-08-01

    Full Text Available The influence of the acid extract of peel of Cucurbita maxima (PCM on the corrosion of mild steel in 1N H2SO4 was investigated by weight loss, polarization and impedance methods and SEM analysis. The inhibition efficiency increases with extract concentration and immersion period. Weight loss and corrosion rates of mild steel decreased as the concentration of inhibitor increased. The results showed that PCM was potential corrosion inhibitor and maximum inhibition efficiency (IE % obtained was 98% for 3%PCM at 1h. Impedance measurement results an increase in charge transfer resistance (Rct, which also confirms the corrosion inhibitive nature of the plant extract. Potentiodynamic study showed that PCM acts as a mixed type of inhibitor, which controls both the anodic and cathodic reactions. Scanning electron microscopic studies provided the evidence of improved surface condition for the corrosion protection, due to the adsorption.

  17. Acid Corrosion Inhibition and Adsorption Behaviour of Ethyl Hydroxyethyl Cellulose on Mild Steel Corrosion

    Directory of Open Access Journals (Sweden)

    I. O. Arukalam

    2014-01-01

    Full Text Available The corrosion inhibition of mild steel in 1.0 M H2SO4 solution by ethyl hydroxyethyl cellulose has been studied in relation to the concentration of the additive using weight loss measurement, EIS, polarization, and quantum chemical calculation techniques. The results indicate that EHEC inhibited corrosion reaction in the acid medium and inhibition efficiency increased with EHEC concentration. Further increase in inhibition efficiency is observed in the presence of iodide ions, due to synergistic effect. Impedance results reveal that EHEC is adsorbed on the corroding metal surface. Adsorption followed a modified Langmuir isotherm, with very high negative values of the free energy of adsorption (ΔGads. The polarization data indicate that the inhibitor was of mixed type, with predominant effect on the cathodic partial reaction. The frontier molecular orbitals, HOMO (the highest occupied molecular orbital and LUMO (the lowest unoccupied molecular orbital as well as local reactivity of the EHEC molecule, were analyzed theoretically using the density functional theory to explain the adsorption characteristics at a molecular level. The theoretical predictions showed good agreement with experimental results.

  18. Effect of optimized structure and electronic properties of some benzimidazole derivatives on corrosion inhibition of mild steel in hydrochloric acid medium: Electrochemical and theoretical studies

    Indian Academy of Sciences (India)

    Alokdut Dutta; Sujit Sankar Panja; M M Nandi; Dipankar Sukul

    2015-05-01

    The corrosion inhibitive action of a few benzimidazole derivatives namely 2-(benzamido) ethylbenzimidazole (BAEBI), 2-(-benzenesulphonamido) ethylbenzimidazole (BSAEBI), 2-(benzamido) methylbenzimidazole (BAMBI) and 2-(-benzenesulphonamido) methylbenzimidazole (BSAMBI), towards mild steel in hydrochloric acid has been studied using potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) methods. The results show that these compounds get adsorbed on the mild steel surface following Temkin adsorption isotherm, and act as mixed-type inhibitors. The inhibition efficiencies are found to follow the order, BAEBI > BSAEBI > BAMBI > BSAMBI. This observation is explained in terms of chain length, relative effects of amido and sulphonamido groups, possible structural factors, spatial orientations, energy gap between the frontier molecular orbitals, different intrinsic molecular parameters, like, global hardness and softness, and number of electrons transferred.

  19. Comparison Of Metal Corrosion Inhibition By Gravimetric And Linear Polarization Resistance Methods

    OpenAIRE

    1992-01-01

    Studies were conducted to evaluate the effectiveness of various dosages of the selected silicate and phosphate compounds applied for corrosion inhibition of cast iron, copper, lead, and galvanized steel specimens. The compounds selected for study were zinc polyphosphate (Calgon C-39), zinc orthophosphate (Virchem V-931), sodium metasilicate and glassy silicate. The effectiveness of these compounds for corrosion inhibition were studied under differing water quality conditions using gravimetric...

  20. Application of electrochemical frequency modulation for monitoring corrosion and corrosion inhibition of iron by some indole derivatives in molar hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Khaled, K.F. [Electrochemistry Research Laboratory, Chemistry Department, Faculty of Education, Ain Shams University, Roxy, Cairo (Egypt)], E-mail: khaled@asunet.shams.edu.eg

    2008-11-15

    The corrosion inhibition effect of four indole derivatives, namely indole (IND), benzotriazole (BTA), benzothiazole (BSA) and benzoimidazole (BIA), have been used as possible corrosion inhibitors for pure iron in 1 M HCl. In this study, electrochemical frequency modulation, EFM was used as an effective method for corrosion rate determination in corrosion inhibition studies. By using EFM measurements, corrosion current density was determined without prior knowledge of Tafel slopes. Corrosion rates obtained using EFM, were compared to that obtained from other chemical and electrochemical techniques. The results obtained from EFM, EIS, Tafel and weight loss measurements were in good agreement. Tafel polarization measurements show that indole derivatives are cathodic-type inhibitors. Molecular simulation studies were applied to optimize the adsorption structures of indole derivatives. The inhibitor/iron/solvent interfaces were simulated and the adsorption energies of these inhibitors were calculated. Quantum chemical calculations have been performed and several quantum chemical indices were calculated and correlated with the corresponding inhibition efficiencies.

  1. CORROSION INHIBITION AND SYNERGISTIC EFFECT OF GREEN SCALE INHIBITOR POLYEPOXYSUCCINIC ACID%绿色阻垢剂聚环氧琥珀酸的缓蚀协同效应

    Institute of Scientific and Technical Information of China (English)

    熊蓉春; 周庆; 魏刚

    2003-01-01

    The corrosion inhibition of a kind of green scale inhibitor, polyepoxysuccinic acid (PESA) was studied based on dynamic experiments. In addition, the synergistic effect among PESA, Zn2+ and sodium gluconate was also investigated. According to the experimental data, when only PESA is used, it had fairly good effect on steel. The synergy between PESA and Zn2+ or sodium gluconate was poor. However, the synergistic effect of PESA, Zn2+ and sodium gluconate is very good. Further experiments show that the corrosion inhibition of PESA is mainly affected by oxygen atom inserted.

  2. Synergistic inhibition effect of 5-aminotetrazole and 4,6-dihydroxypyrimidine on the corrosion of cold rolled steel in H{sub 3}PO{sub 4} solution

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xianghong, E-mail: xianghong-li@163.com [Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224 (China); Faculty of Science, Southwest Forestry University, Kunming 650224 (China); Deng, Shuduan [Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224 (China); Xie, Xiaoguang [School of Chemical Science and Technology, Yunnan University, Kunming 650091 (China); Du, Guanben [Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224 (China)

    2016-09-15

    The synergistic inhibition effect of 5-aminotetrazole (AT) and 4,6-dihydroxypyrimidine (DHP) on the corrosion of cold rolled steel (CRS) in H{sub 3}PO{sub 4} solution was studied by weight loss, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), quantum chemical calculation and molecular dynamics (MD) methods. The results show that AT exhibits a moderate inhibitive effect, and DHP has a poor effect. However, incorporation AT with DHP significantly improves the inhibitive performance, and yields synergism. The adsorption of AT in the absence and presence of DHP obeys Langmuir adsorption isotherm. AT/DHP mixture acts as a mixed-type inhibitor. The combined AT and DHP molecules co-adsorb on the Fe (001) surface in the nearly flat manner, and the adsorption energy is larger than individual AT or DHP. - Highlights: • There is a synergistic inhibition effect of AT and DHP for steel in H{sub 3}PO{sub 4} solution. • The adsorption of AT whether it is mixed with DHP or not obeys Langmuir isotherm. • The AT/DHP mixture behaves as a mixed-type inhibitor. • E{sub HOMO} increases and E{sub LUMO} decreases in the combined AT and DHP. • AT and DHP co-adsorb on Fe (001) surface with the nearly flat manner.

  3. Experimental and quantum chemical studies on corrosion inhibition performance of fluconazole in hydrochloric acid solution

    Indian Academy of Sciences (India)

    P Malekmohammadi Nouri; M M Attar

    2015-04-01

    The corrosion inhibition effect of fluconazole (FLU) was investigated on steel in 1 M hydrochloric acid solution. Weight loss measurements and atomic force microscope analysis were utilized to investigate the corrosion inhibition properties and film formation behaviour of FLU. Quantum chemical approach was also used to calculate some electronic properties of the molecule in neutral and protonated form in order to find any correlation between the inhibition effect and molecular structure of FLU molecule. The results showed that FLU can act as a good corrosion inhibitor for steel in hydrochloric acid solution at different temperatures and it can inhibit steel corrosion up to 95%. The adsorption followed the Langmuir isotherm and the thermodynamic parameters were also determined and discussed. Quantum chemical studies showed that in adsorption process of FLU molecules, nitrogen and oxygen atoms and benzene ring act as active centres.

  4. Electrochemical impedance spectroscopy study on corrosion inhibition of benzyltriethylammonium chloride

    Science.gov (United States)

    Idris, Mohd Nazri; Daud, Abdul Razak; Othman, Norinsan Kamil

    2013-11-01

    Electrochemical Impedance Spectroscopy (EIS) was employed to study the corrosion inhibition behavior of benzyltriethylammonium chloride (BTC) for carbon steel corrosion. The inhibition efficiency was investigated in 1.0 M HCl solution at room temperature (25°C) by varying the BTC concentration. EIS results indicated that the double layer capacitance of electrolyte/carbon steel interface decreases with the increasing of BTC concentration and consequently enhances the polarization resistance of equivalence Randles circuit. The results indicated that inhibition efficiency of as high as 65% could be achieved when 10mM BTC was present in 1.0 M HCl solution as compared to inhibitor-free solution. The inhibition process of BTC on the carbon steel corrosion was found to obey Langmuir adsorption isotherm. This study revealed that BTC is suitable to be used as a corrosion inhibitor in acid media.

  5. Inhibition of the corrosion of steel in 1 M HCl by eugenol derivatives

    Science.gov (United States)

    Chaieb, E.; Bouyanzer, A.; Hammouti, B.; Benkaddour, M.

    2005-06-01

    The effect of eugenol (Eug) and its derivative acetyleugenol (AcEug) extracted from the nail of giroflier on the corrosion of steel in molar hydrochloric acid has been studied using weight loss measurements, electrochemical polarisation and EIS methods. The naturally substances reduce the corrosion rate. The inhibition efficiency was found to increase with acetyleugenol content to attain 91% at 0.1737 g/l. Eugenol compounds act as mixed type inhibitors. The effect of temperature on the corrosion behaviour of steel indicates that inhibition efficiency of the natural substance increases with the rise of temperature. The adsorption of natural product on the steel is found to follow the Langmuir adsorption isotherm.

  6. Corrosion inhibition of carbon steel by extract of Buddleia perfoliata

    Directory of Open Access Journals (Sweden)

    ROY LOPES-SESENES

    2012-06-01

    Full Text Available Buddleia perfoliata leaves extract has been investigated as a carbon steel corrosion inhibitor in 0.5 M sulfuric acid by using polarization curves, electrochemical impedance spectroscopy and weight-loss tests at different concentrations (0, 100, 200, 300, 400 and 500 ppm and temperatures, namely 25, 40 and 60 °C. Results showthat inhibition efficiency increases as the inhibitor concentration increases, decreases with temperature, and reaches a maximum value after 12 h of exposure, decreasing with a further increase in the exposure time. It was found that the inhibitory effect is due to the presence of tannines on this extract.

  7. Novel package for inhibition of aluminium corrosion in alkaline solutions

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Gaber, A.M., E-mail: ashrafmoustafa@yahoo.com [Chemistry Department, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); Khamis, E.; Abo-Eldahab, H.; Adeel, Sh. [Chemistry Department, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)

    2010-11-01

    Inhibition of aluminium corrosion in 2 M sodium hydroxide solution by a package composed of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and lupine seed extract has been investigated employing different electrochemical techniques and chemical gasometry measurements. Potentiodynamic polarization curve measurements showed that lupine seed extract controls both the anodic dissolution of aluminium and the hydrogen gas evolved at the cathodic sites of aluminium surface. Nyquist plots showed two capacitive semicircles in the high and low frequency regions separated by an inductive loop at intermediate frequencies. The inductive loop may be explained by the occurrence of adsorbed intermediates on the surface. A proposed equivalent circuit was used to analyse the impedance spectra for aluminium in NaOH solutions. The corrosion inhibition data have been analysed using different isotherms. The results showed excellent agreement between the kinetic-thermodynamic model and Flory-Huggins isotherm. Gasometry measurements showed that the Inhibitive effect of the surfactant increases at a composition around its critical micelle concentration (cmc). The presence of both the surfactant and lupine seed extract did not indicate synergistic action between them. The mode of adsorption of the surfactant molecules corresponding to their structure is also discussed.

  8. The synergistic effect of Na{sub 3}PO{sub 4} and benzotriazole on the inhibition of copper corrosion in tetra-n-butylammonium bromide aerated aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Liu, S.; Dong, J.; Guan, W.W.; Duan, J.M.; Jiang, R.Y. [Department of Applied Chemistry, South China University of Technology, Guangzhou 510640 (China); Feng, Z.P.; Song, W.J. [Guangzhou Institute of Energy Conversion, CAS, Guangzhou 510640 (China)

    2012-11-15

    The effect of Na{sub 3}PO{sub 4} and the mixture of benzotriazole (BTA) and Na{sub 3}PO{sub 4} (SP) on the corrosion of copper in 17 wt% (0.534 mol/L) tetra-n-butylammonium bromide (TBAB) aerated aqueous solution has been investigated by means of weight-loss test, potentiodynamic polarization test, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy/energy dispersive X-ray techniques. The experimental results showed that a dosage of Na{sub 3}PO{sub 4} stimulated the copper corrosion, and the corrosion rate increased with increasing Na{sub 3}PO{sub 4} concentration, whereas the mixture of BTA and Na{sub 3}PO{sub 4} could protect copper in aqueous TBAB solution. The inhibition action of the mixture of BTA and Na{sub 3}PO{sub 4} on the corrosion of copper is mainly due to the inhibition of the anodic process of corrosion. The inhibition efficiency of a mixture consisting of 2 g/L BTA and 1 g/L Na{sub 3}PO{sub 4} was about 96%. The mixture of BTA and Na{sub 3}PO{sub 4} inhibits the corrosion of copper better than BTA by itself, indicating that Na{sub 3}PO{sub 4} has a synergistic role with BTA on the corrosion inhibition of copper in TBAB aqueous solution. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  9. Synergistic effect of sodium dodecyl sulfate and cetyltrimethyl ammonium bromide on the corrosion inhibition behavior of l-methionine on mild steel in acidic medium

    Directory of Open Access Journals (Sweden)

    M. Mobin

    2017-02-01

    Full Text Available The corrosion inhibition behavior of amino acid l-methionine (LMT separately and in combination with very low concentration of surfactants sodium dodecyl sulfate (SDS and cetyltrimethyl ammonium bromide (CTAB on mild steel in 0.1 M H2SO4 solution was studied, using weight loss and potentiodynamic polarization measurement techniques. The studies were carried out in the temperature range of 30–60 °C. The surface morphology of the corroded steel samples was studied by scanning electron microscopy (SEM and atomic force microscopy (AFM.The results show that LMT is an effective inhibitor for mild steel corrosion in 0.1 M H2SO4 which is synergistically improved in the presence of SDS and CTAB. The mixed LMT and CTAB is more effective as an inhibitor than mixture of LMT and SDS. The SEM and AFM photographs show a clearly different surface morphology in the presence of additives. LMT alone and in combination with surfactants obeys Langmuir adsorption isotherm from the fit of the experimental data of all concentrations and temperatures studied. Phenomenon of physical adsorption is proposed from the trend of the IE with temperature and also the values of activation energy (Ea, standard enthalpy of adsorption (ΔHads, and standard free energy of adsorption (ΔGads obtained. The results obtained by potentiodynamic polarization measurements are consistent with the results of the weight loss measurements. LMT acts as a mixed type inhibitor.

  10. Inhibitive Performance of Benzotriazole for Steel Corrosion Studied by Electrochemical and AFM Characterization

    Science.gov (United States)

    Feng, Yuanchao; Cheng, Y. Frank

    2015-12-01

    In this work, the inhibiting effect of benzotriazole (BTA) on corrosion of X65 pipeline steel in bicarbonate solution was investigated by electrochemical measurements, including open-circuit potential, potentiodynamic polarization curves and electrochemical impedance spectroscopy, and atomic force microscopy characterization. It is found that BTA is effective to inhibit the steel corrosion, and the inhibiting efficiency is increased by the increasing inhibitor concentration. The BTA is an anodic inhibitor, which shifts the corrosion potential of the steel less negatively and decreases the anodic current density at individual potential. A layer of inhibitor film is formed on the steel surface to reduce the corrosion rate of the steel. The formed film is quite smooth, with a roughness at the nano-meter scale.

  11. CORROSION INHIBITION BY CASHEW NUT SHELL

    African Journals Online (AJOL)

    is the primary step in the action of organic corrosion inhibitors (Trabanelli. 1989). ... polarized. Electrochemical Impedance Spectroscopy (EIS) measurements .... solutions and UV/VIS to determine the adsorption of the CNSL inhibitor on.

  12. Chemical treatment of zinc surface and its corrosion inhibition studies

    Indian Academy of Sciences (India)

    S K Rajappa; T V Venkatesha; B M Praveen

    2008-02-01

    The surface treatment of zinc and its corrosion inhibition was studied using a product (BTSC) formed in the reaction between benzaldehyde and thiosemicarbozide. The corrosion behaviour of chemically treated zinc surface was investigated in aqueous chloride–sulphate medium using galvanostatic polarization technique. Zinc samples treated in BTSC solution exhibited good corrosion resistance. The measured electrochemical data indicated a basic modification of the cathode reaction during corrosion of treated zinc. The corrosion protection may be explained on the basis of adsorption and formation of BTSC film on zinc surface. The film was binding strongly to the metal surface through nitrogen and sulphur atoms of the product. The formation of film on the zinc surface was established by surface analysis techniques such as scanning electron microscopy (SEM–EDS) and Fourier transform infrared spectroscopy (FTIR).

  13. Corrosion Inhibition by Sodium Gluconate-Zn2+-DTPMP System

    Directory of Open Access Journals (Sweden)

    P. Manjula

    2009-01-01

    Full Text Available The inhibition efficiency of a phosphonic acid, Diethylene Triamine Pentamethylene Phosphonic acid (DTPMP in controlling corrosion of carbon steel immersed in an aqueous solution containing 60 ppm of Cl- has been evaluated by weight loss method in the absence and presence of Zn2+. The formulation consisting of DTPMP and Zn2+ has excellent inhibition efficiency (IE. A synergistic effect is noticed between Zn2+ and DTPMP. Addition of sodium gluconate (SG enhances the IE of Zn2+ and DTPMP system. The DTPMP-Zn2+-SG system function as a mixed inhibitor as revealed by polarization study. AC impedance spectrum, optical and atomic force micrographs reveal the formation of a protective film on the metal surface. FTIR spectra reveal that the protective film consists of Fe2+-DTPMP complex, Fe2+-SG complex and Zn(OH2.

  14. Corrosion Inhibition of Carbon Steel In Sulfuric Acid by Sodium Caprylate

    Directory of Open Access Journals (Sweden)

    Saad Ghareba

    2016-01-01

    Full Text Available The interaction of a sodium salt of octanoic acid, sodium caprylate (SC, with a carbon steel (CS surface was investigated, using range of experimental techniques. It was shown that SC acts as a good CS general corrosion inhibitor, yielding a maximum corrosion inhibition efficiency of 77%. This high inhibition efficiency is maintained even at higher temperatures. It was determined that SC inhibits both partial corrosion reactions, and can thus be considered to be a mixed-type inhibitor. The adsorption of SC on the CS surface was described by the Langmuir adsorption isotherm. It was found that this process is spontaneous, irreversible and driven by the entropy gain. The CS surface morphology was studied by SEM and it was demonstrated that SC is a very effective general corrosion inhibitor of CS. This also was confirmed by contact angle measurements which showed that the CS surface became more hydrophobic when the SC was added to the solution.

  15. Corrosion inhibition of mild steel by aerobic biofilm

    Energy Technology Data Exchange (ETDEWEB)

    Chongdar, Shobhana [Naval Materials Research Laboratory, Addl. Ambarnath 421506 (India); Gunasekaran, G. [Naval Materials Research Laboratory, Addl. Ambarnath 421506 (India)]. E-mail: gunanmrl@rediffmail.com; Kumar, Pradeep [Naval Materials Research Laboratory, Addl. Ambarnath 421506 (India)

    2005-08-30

    Mild steel electrodes were incubated in phosphate-buffered basal salt solution (BSS) having two different aerobic bacteria, viz. Pseudomonas alcaligenes and Pseudomonas cichorii. In the medium containing P. cichorii, significant reduction in the corrosion rate was observed due to the surface reaction leading to the formation of corrosion inhibiting bacterial biofilm. With a view to understand the mechanism of microbially influenced corrosion/corrosion inhibition, electrochemical and biological experiments such as electrochemical impedance spectroscopy (EIS) measurements and biochemical analysis were made. The exposed surfaces were examined using scanning electron micrographs (SEM), energy dispersive spectroscopy (EDS) and electron spectroscopy for chemical analysis (ESCA). The scraped surface film was also examined using FT-IR spectroscopy. The results suggested that mild steel surface contained iron oxide-phosphate layer covered with bacteria and exo polymeric substance (EPS)/iron-EPS complex for P. cichorii and iron oxides and iron phosphate for P. alcaligenes.

  16. Compatibility of repair mortar with migrating corrosion inhibiting admixtures

    Energy Technology Data Exchange (ETDEWEB)

    Bjegovic, D.; Ukrainczyk, V. [Univ. of Zagreb (Croatia). Faculty of Civil Engineering; Ukrainczyk, B. [LGM, Zagreb (Croatia); Miksic, B. [CORTEC Corp., St. Paul, MN (United States)

    1997-08-01

    One of the methods for corrosion protection of reinforced concrete is the use of migrating corrosion inhibitor as an admixture in repair mortars. The admixture must be effective for corrosion protection and compatible with polymers added to repair mortar to improve properties of fresh and hardened mortar. This paper presents experimental results on compatibility of a migrating corrosion inhibitor added to two repair mortars based on an inorganic binder modified with polymers. The influence of a migrating inhibitor on the properties of fresh and hardened mortars was tested. The effectiveness on reinforcement corrosion protection has been tested according to ASTM G 109. Test results prove that the investigated migrating inhibitor is compatible with repair mortars and that it delays corrosion of the reinforcement.

  17. Corrosion Inhibition Property of Some 1, 3, 4- Thiadiazolines on Mild Steel in Acidic Medium

    Directory of Open Access Journals (Sweden)

    A. Shamitha Begum

    2010-01-01

    Full Text Available The present work deals with the corrosion behavior of mild steel in acidic medium. The inhibitive effect of substituted 1, 3, 4-Thiadiazol-2-amines on the corrosion of mild steel in 1 M H2SO4 has been studied by weight loss and electrochemical methods. The electrochemical parameters for mild steel in acidic solution with and without inhibitor were calculated. The effect of temperature on the corrosion rate, activation energy and free energy of adsorption were also calculated. The synergistic effect has been studied by weight loss and electrochemical methods. The electrochemical parameters for mild steel in acidic solution were also calculated.

  18. Inhibition Behaviour of 2-butine1, 4diol and Tartrate Salt, and Their Synergistic Effects on Corrosion of AA3003 Aluminium Alloy in 0.5% NaCl Solution

    Institute of Scientific and Technical Information of China (English)

    Taghi Shahrabi; Alireza Yazdzad; Mirghasem Hosseini

    2008-01-01

    This work intends to investigate the inhibition behaviour of 2-butine 1, 4diol and potassium sodium tartrate and their synergistic effects on 3003 aluminium alloy corrosion in 0.5% NaCl solution. Experiments were carried out by electrochemical impedance spectroscopy (EIS) and Tafel polarization method in a three-electrode cell. It was concluded that the inhibition efficiencies increased with an increase in the concentrations of inhibitors. For 2-butinel, 4diol and tartrate salt, the optimum in the inhibition efficiency, at room temperature and neutral pH, was observed for concentrations close to 10-3 mol/L and 1.5×10-3mol/L, respectively. The electrochemical results illustrated that 2-butine1, 4diol and tartrate salt, have significant synergistic inhibition effects on corrosion of 3003 aluminium alloy in 0.5% NaCl solution. The optimum ratio of concentrations for tartrate to alcohol was 2:1.

  19. The corrosion inhibition of iron and aluminum by various naturally occurring biological molecules

    Energy Technology Data Exchange (ETDEWEB)

    McCafferty, E.; Hansen, D.C. [Naval Research Lab., Washington, DC (United States)

    1995-12-31

    Biological polymers that exhibit a strong affinity for metal surfaces are increasingly becoming the focus of research toward the development of environmentally friendly corrosion inhibitors. This paper deals with the use of various naturally occurring organic molecules as corrosion inhibitors for iron or aluminum. Among the organic molecules considered are catecholate and hydroxamate siderophores isolated from bacteria, the adhesive protein from the blue mussel Mytilus edulis L, and caffeic acid and chlorogenic acid. FTIR analysis, anodic polarization curves, and AC impedance measurements were used to determine the adsorption and effectiveness of the various organic molecules as corrosion inhibitors. Parabactin, a catecholate siderophore, was effective in inhibiting both the corrosion of iron in hydrochloric acid and the pitting of aluminum in 0.1 M sodium chloride. The adhesive protein from the blue mussel was also effective in inhibiting the pitting of aluminum.

  20. Corrosion inhibition of mild steel in hydrochloric acid solution by some double Schiff bases

    Energy Technology Data Exchange (ETDEWEB)

    Soltani, N. [Payame Noor University (PNU), Shahin Shahr Branch, Isfahan (Iran, Islamic Republic of)], E-mail: N.Soltani@kashanu.ac.ir; Behpour, M.; Ghoreishi, S.M.; Naeimi, H. [Department of Chemistry, Faculty of Science, University of Kashan, Kashan (Iran, Islamic Republic of)

    2010-04-15

    The inhibition effect of four double Schiff bases on the corrosion of mild steel in 2 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. The inhibitors were adsorbed on the steel surface according to the Langmuir adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process were calculated and discussed. Kinetic parameters activation such as E{sub a}, {delta}H*, {delta}S* were evaluated from the effect of temperature on corrosion and inhibition processes. Quantum chemical calculations have been performed and several quantum chemical indices were calculated and correlated with the corresponding inhibition efficiencies.

  1. Adsorption and Corrosion Inhibition Studies of Some Selected Dyes as Corrosion Inhibitors for Mild Steel in Acidic Medium: Gravimetric, Electrochemical, Quantum Chemical Studies and Synergistic Effect with Iodide Ions

    Directory of Open Access Journals (Sweden)

    Thabo Peme

    2015-09-01

    Full Text Available The corrosion inhibition properties of some organic dyes, namely Sunset Yellow (SS, Amaranth (AM, Allura Red (AR, Tartrazine (TZ and Fast Green (FG, for mild steel corrosion in 0.5 M HCl solution, were investigated using gravimetric, potentiodynamic polarization techniques and quantum chemical calculations. The results showed that the studied dyes are good corrosion inhibitors with enhanced inhibition efficiencies. The inhibition efficiency of all the studied dyes increases with increase in concentration, and decreases with increase in temperature. The results showed that the inhibition efficiency of the dyes increases in the presence of KI due to synergistic interactions of the dye molecules with iodide (I− ions. Potentiodynamic polarization results revealed that the studied dyes are mixed-type inhibitors both in the absence and presence of KI. The adsorption of the studied dyes on mild steel surface, with and without KI, obeys the Langmuir adsorption isotherm and involves physical adsorption mechanism. Quantum chemical calculations revealed that the most likely sites in the dye molecules for interactions with mild steel are the S, O, and N heteroatoms.

  2. Adsorption and Corrosion Inhibition Studies of Some Selected Dyes as Corrosion Inhibitors for Mild Steel in Acidic Medium: Gravimetric, Electrochemical, Quantum Chemical Studies and Synergistic Effect with Iodide Ions.

    Science.gov (United States)

    Peme, Thabo; Olasunkanmi, Lukman O; Bahadur, Indra; Adekunle, Abolanle S; Kabanda, Mwadham M; Ebenso, Eno E

    2015-09-02

    The corrosion inhibition properties of some organic dyes, namely Sunset Yellow (SS), Amaranth (AM), Allura Red (AR), Tartrazine (TZ) and Fast Green (FG), for mild steel corrosion in 0.5 M HCl solution, were investigated using gravimetric, potentiodynamic polarization techniques and quantum chemical calculations. The results showed that the studied dyes are good corrosion inhibitors with enhanced inhibition efficiencies. The inhibition efficiency of all the studied dyes increases with increase in concentration, and decreases with increase in temperature. The results showed that the inhibition efficiency of the dyes increases in the presence of KI due to synergistic interactions of the dye molecules with iodide (I(-)) ions. Potentiodynamic polarization results revealed that the studied dyes are mixed-type inhibitors both in the absence and presence of KI. The adsorption of the studied dyes on mild steel surface, with and without KI, obeys the Langmuir adsorption isotherm and involves physical adsorption mechanism. Quantum chemical calculations revealed that the most likely sites in the dye molecules for interactions with mild steel are the S, O, and N heteroatoms.

  3. Corrosion inhibition performance of a ionic liquid surfactant Br

    Directory of Open Access Journals (Sweden)

    Jing LIU

    2016-02-01

    Full Text Available In order to study the novel green organic mercury-substituting inhibitors, the ionic liquid surfactant 1-methyl-3-dodecyl imidazole bromide ( Br is synthesized with N-methyl imidazole and 1-bromodecane as raw materials. The corrosion inhibition of Br for zinc in zinc-manganese batteries is investigated using electrochemical methods and weight loss methods. The results show that corrosion inhibition efficiency increases with the increase of the concentration of Br, and when the concentration is higher than 8×10-3 mol/L, the inhibition efficiency tends to be stable. The polarization curve shows that Br belongs to mixed-type corrosion inhibitor. The thermodynamic parameters show that Br is spontaneously adsorbed on the zinc surface, forming a monomolecular adsorption layer, which fits with Langmuir adsorption isotherm with physical and chemical adsorption mechanism.

  4. Inhibitive effect by Psidium guajava leaf extract on the corrosion of Al-Si-Mg (SSM-HPDC alloy in simulated seawater environment

    Directory of Open Access Journals (Sweden)

    M. Abdulwahab

    2015-12-01

    Full Text Available The assessment of Psidium guajava leaf extract as corrosion inhibitor for Al-Si- Mg (SSM-HPDC alloy in 3.5%wt NaCl solution using the gravimetric based-mass loss and potentiodynamic polarization techniques was investigated. The gravimetric based mass loss test was carried out at different inhibitor concentration, time and temperature ranges of 0.1-0.5%v/v, 1-5 hrs and 30-70oC, respectively, the results revealed that Psidium guajava leaf extract in 3.5%wt NaCl solution-aluminium environment decreased the corrosion rate at various concentrations considered. Inhibition efficiency (IE as high as 63.17% at 0.5% v/v Psidium guajava leaf extract addition using the gravimetric method was demonstrated in 3.5%wt NaCl solution. The IE of 90.48% was obtained at 0.5%v/v using the potentiodynamic polarization method. The additions of Psidium guajava leaf extract as corrosion inhibitor in the solution indicate higher potential value, IE and polarization resistance with decrease in current density. The two methods used for assessment of the aluminium alloy corrosion behaviour were in agreement and mixed-type corrosion exists which obeyed the Langmuir adsorption isotherm.

  5. The isoxazolidines: the effects of steric factor and hydrophobic chain length on the corrosion inhibition of mild steel in acidic medium

    Energy Technology Data Exchange (ETDEWEB)

    Ali, S.A. [Chemistry Department, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia)]. E-mail: shaikh@kfupm.edu.sa; El-Shareef, A.M. [Chemistry Department, Dammam Girl' s College, Dammam 31113 (Saudi Arabia); Al-Ghamdi, R.F. [Chemistry Department, Dammam Girl' s College, Dammam 31113 (Saudi Arabia); Saeed, M.T. [Chemistry Department, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia)

    2005-11-01

    Several new isoxazolidines having varying degree of steric environment and hydrophobic chain length, prepared efficiently using single-step nitrone cycloaddition reactions, are tested for corrosion inhibition of mild steel in 1M and 5M HCl at 50-70{sup o}C range by gravimetric and electrochemical methods. All compounds have shown very good corrosion inhibition efficiency (IE%) in acidic solution. Steric crowding around the nitrogen centres and hydrophobic chain lengths as well as increase in temperature (in the presence of the inhibitor in the higher concentration range 100-400ppm) are found to increase the inhibition efficiency of the isoxazolidines. Thermodynamic parameters ({delta}G{sup o}{sub ads}, {delta}H{sup o}{sub ads}, {delta}S{sup o}{sub ads}) for the adsorption process and kinetic parameters for the metal dissolution (or hydrogen evolution) reaction in the presence of one of the isoxazolidines were determined. Experimental results agree with the Temkin adsorption isotherm. The inhibition of corrosion in 1M HCl, influenced by both physi- and chemi-sorption, was found to be under mixed control, but predominantly under cathodic control.

  6. Corrosion Inhibition of the Galvanic Couple Copper-Carbon Steel in Reverse Osmosis Water

    Directory of Open Access Journals (Sweden)

    Irene Carrillo

    2011-01-01

    Full Text Available The purpose of this paper is to evaluate the electrochemical behaviour of corrosion inhibition of the copper-carbon steel galvanic couple (Cu-CS, exposed to reverse osmosis water (RO used for rinsing of heat exchangers for heavy duty machinery, during manufacture. Molybdate and nitrite salts were utilized to evaluate the inhibition behaviour under galvanic couple conditions. Cu-CS couple was used as working electrodes to measure open circuit potential (OCP, potentiodynamic polarization (PP, and electrochemical impedance spectroscopy (EIS. The surface conditions were characterized by scanning electron microscopy (SEM and electron dispersive X-ray spectroscopy (EDS. The most effective concentration ratio between molybdate and nitrite corrosion inhibitors was determined. The morphological study indicated molybdate deposition on the anodic sites of the galvanic couple. The design of molybdate-based corrosion inhibitor developed in the present work should be applied to control galvanic corrosion of the Cu-CS couple during cleaning in the manufacture of heat exchangers.

  7. An atomic emission spectroelectrochemical study of corrosion inhibition: The effect of hexamethylenetetramine on the reaction of mild steel in HCl

    Energy Technology Data Exchange (ETDEWEB)

    Volovitch, P., E-mail: polina-volovitch@enscp.f [Laboratoire de Physicochimie des Surfaces, UMR7045, Ecole Nationale Superieure de Chimie de Paris, Chmie ParisTech, 11, rue Pierre et Marie Curie, Paris (France); Gazizzullin, I.; Ruel, F. [Laboratoire de Physicochimie des Surfaces, UMR7045, Ecole Nationale Superieure de Chimie de Paris, Chmie ParisTech, 11, rue Pierre et Marie Curie, Paris (France); Ogle, K., E-mail: kevin-ogle@enscp.f [Laboratoire de Physicochimie des Surfaces, UMR7045, Ecole Nationale Superieure de Chimie de Paris, Chmie ParisTech, 11, rue Pierre et Marie Curie, Paris (France)

    2011-04-15

    Research highlights: Time resolved elemental dissolution rates on time scales typical for pickling lines. Segregated impurities dissolve selectively at early stages. At high HMTA concentration the dissolution rate is the same for different steels. Several mechanisms of HMTA inhibition are discussed. - Abstract: The dissolution of low carbon steel in hydrochloric acid has been investigated by atomic emission spectroelectrochemistry. The rate of Mn, Fe and P dissolution was measured as a function of time for steels of variable Mn and P composition and as a function of HMTA concentration. Regardless of the reactivity of the steel in uninhibited solutions, at high concentration of HMTA, all steel grades show a nearly identical dissolution rate. The effect is selective for Fe; the dissolution of segregated Mn is not affected by HMTA.

  8. Corrosion inhibition of α,β-unsaturated carbonyl compounds on steel in acid medium

    Institute of Scientific and Technical Information of China (English)

    Gao Jiancun; Weng Yongji; Salitanate; Feng Li; Yue Hong

    2009-01-01

    Corrosion inhibition of three α,β-unsaturated carbonyl compounds on N80 steel at high temperature and in concentrated acid medium was evaluated, and the inhibition mechanism was investigated.The results proved that both cinnamaidehyde and benzalacetone had an evident anticorrosion effect and could reduce the corrosion of steel effectively in acid medium, α,β-unsaturated carbonyl compounds with a benzene ring structure had good adsorption on steel surface.The experiments proved that polymerization of α,β-unsaturated carbonyl compounds on the steel surface at a high temperature and in concentrated acid medium resulted in a good corrosion inhibiting effect, which was attributed to the structures of α,β-unsaturated carbonyl compounds.

  9. The Corrosion Inhibition Characteristics of Sodium Nitrite Using an On-line Corrosion Rate Measurement System

    Energy Technology Data Exchange (ETDEWEB)

    Park, Mal-Yong; Kang, Dae-Jin [Korea Polytechnic University, Shiheung (Korea, Republic of); Moon, Jeon-Soo [Future Technology Research Laboratory, KEPCO Research Institute, Daejeon (Korea, Republic of)

    2015-04-15

    An on-line corrosion rate measurement system was developed using a personal computer, a data acquisition board and program, and a 2-electrode corrosion probe. Reliability of the developed system was confirmed with through comparison test. With this system, the effect of sodium nitrite (NaNO{sub 2}) as a corrosion inhibitor were studied on iron and aluminum brass that were immersed in sodium chloride (NaCl) solution. Corrosion rate was measured based on the linear polarization resistance method. The corrosion rates of aluminum brass and iron in 1% NaCl solutions were measured to be 0.290 mm per year (mmpy) and 0.2134 mmpy, respectively. With the addition of 200 ppm of NO{sub 2}{sup -}, the corrosion rates decreased to 0.0470 mmpy and 0.0254 mmpy. The addition of NO{sub 2}{sup -} caused a decrease in corrosion rates of both aluminum brass and iron, yet the NO{sub 2}{sup -} acted as a more effective corrosion inhibitor for iron. than aluminum brass.

  10. Effect of Mixed Corrosion Inhibitors in Cooling Water System

    Directory of Open Access Journals (Sweden)

    Dina Raheem

    2011-01-01

    Full Text Available The effect of mixed corrosion inhibitors in cooling system was evaluated by using carbon steel specimens and weight loss analysis. The carbon steel specimens immersed in mixture of sodium phosphate (Na2 HPO4 used as corrosion inhibitor and sodium glocunate (C6 H11 NaO7 as a scale dispersant at different concentrations (20,40, 60, 80 ppm and at different temperature (25,50,75 and 100ºC for (1-5 days. The corrosion inhibitors efficiency was calculated by using uninhibited and inhibited water to give 98.1%. The result of these investigations indicate that the corrosion rate decreases with the increase the corrosion inhibitors concentration at 80 ppm and at 100ºC for 5 days, (i.e, corrosion rate= 0.014gmd.

  11. Adsorption Properties and Inhibition of C38 Steel Corrosion in Hydrochloric Solution by Some Indole Derivates: Temperature Effect, Activation Energies, and Thermodynamics of Adsorption

    Directory of Open Access Journals (Sweden)

    M. Lebrini

    2013-01-01

    Full Text Available The corrosion rates in the presence of some indole derivates, namely, 9H-pyrido[3,4-b]indole (norharmane and 1-methyl-9H-pyrido[3,4-b]indole (harmane, as inhibitors of C38 steel corrosion inhibitor in 1 M HCl solution, were measured by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS techniques, in the range of temperatures from 25 to 55∘C. Results obtained revealed that the organic compounds investigated have inhibiting properties for all temperatures. The inhibition was assumed to occur via adsorption of the indole molecules on the metal surface. Adsorption of indole derivates was found to follow the Langmuir isotherm. The apparent activation energies, enthalpies, and entropies of the dissolution process and the free energies and enthalpies for the adsorption process were determined by potentiodynamic polarization and electrochemical impedance. The fundamental thermodynamic functions were used to collect important information about indole inhibitory behaviour.

  12. Functionalization of Titanium Alloy Surface by Graphene Nanoplatelets and Metal Oxides: Corrosion Inhibition.

    Science.gov (United States)

    Mondal, Jayanta; Aarik, Lauri; Kozlova, Jekaterina; Niilisk, Ahti; Mändar, Hugo; Mäeorg, Uno; Simões, Alda; Sammelselg, Väino

    2015-09-01

    Corrosion inhibition of metallic substrates is an important and crucial step for great economical as well as environmental savings. In this paper, we introduce an extra thin effective corrosion inhibitive material having layered structure designed for protection and functionalization of Ti Grade 5 alloy substrates. The coating consists of a first layer made of thin graphene nanoplatelets, on top of which a multilayer Al2O3 and TiO2 films is applied by low-temperature atomic layer deposition. The amorphous structure of the metal oxide films was confirmed by micro-Raman and X-ray diffraction analysis. Corrosion inhibition ability of the prepared coatings was analyzed by open circuit potential, potentiodynamic plot and by voltammetric analysis, in aqueous potassium bromide solution. The open circuit potential of the graphene-metal oxide coated substrate showed much passive nature than bare substrate or graphene coated or only metal oxide coated substrates. The localized corrosion potential of the graphene-metal oxide coated, only metal oxide coated, and bare substrates were found 5.5, 3.0, and 1.1 V, respectively. In addition, corrosion current density values of the graphene-metal oxide and only metal oxide coated substrates showed much more passive nature than the bare and graphene coated substrates. Long immersion test in the salt solution further clarified the effective corrosion inhibition of the graphene-metal oxide coated substrate. The analyzed results reflect that the graphene-metal oxide films can be used to prepare better and effective corrosion inhibition coatings for the Ti Grade 5 alloy to increase their lifetime.

  13. Corrosion inhibition in 2.0 M sulfuric acid solutions of high strength maraging steel by aminophenyl tetrazole as a corrosion inhibitor

    Science.gov (United States)

    Sherif, El-Sayed M.

    2014-02-01

    The corrosion of high strength maraging steel after varied immersion times in concentrated solution, 2.0 M, of sulfuric acid has been investigated. The work was also extended to study the effect of 5-(3-aminophenyl)-tetrazole (APTA) on the inhibition of the steel corrosion. The study has been carried out using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and scanning electron microscope (SEM) along with energy dispersive X-ray analyzer (EDX) investigations. EIS spectra showed that the corrosion and polarization resistances decrease with increasing the immersion time of the steel before measurement and increase in the presence of APTA and the increase of its concentration. Polarization data agreed with the EIS measurements and indicated that the increase of immersion time increases the corrosion of steel by increasing its corrosion current and corrosion rate and lowering its polarization resistance. On the other hand, the addition of APTA and the increase of its concentration minimized the corrosion of steel through decreasing the corrosion current and corrosion rate and increasing the polarization resistance at all exposure test periods. SEM and EDX investigations confirmed that the inhibition of the maraging steel in the 2.0 M H2SO4 solutions is achieved via the adsorption of the APTA molecules onto the steel protecting its surface from being dissolved easily.

  14. Corrosive effects of hvdc transmission

    Energy Technology Data Exchange (ETDEWEB)

    Cornwell, F.E.; Backstrom, T.E.

    1966-02-01

    Field tests using ac transmission lines for introduction of direct current into the earth at widely separated points are described. One test circuit was between a Tracy pumping plant and a Shasta power plant in California, and two others were in the Hoover power plant area. Evaluation of the effects of such ground currents on corrosion of buried metalwork was a primary aim of the tests. Potential gradients, pipe-to-soil potentials, and soil resistivities are discussed in detail. Estimates are made of the distances from ehv dc terminal installations within which corrosion prevention procedures may become necessary.

  15. Inhibition of localized corrosion of Ni–Ti superelastic alloy in NaCl solution by hydrogen charging

    Energy Technology Data Exchange (ETDEWEB)

    Yokoyama, Ken’ichi, E-mail: yokken@post.matsc.kyutech.ac.jp [Department of Materials Science and Engineering, Kyushu Institute of Technology, 1-1, Sensui-cho, Tobata-ku, Kitakyushu 804-8550 (Japan); Hirata, Yuki [Department of Materials Science and Engineering, Kyushu Institute of Technology, 1-1, Sensui-cho, Tobata-ku, Kitakyushu 804-8550 (Japan); Inaba, Toshiaki; Mutoh, Kenichiro [Furukawa Techno Material Co., Ltd., 5-1-8, Higashi-yawata, Hiratsuka 254-0016 (Japan); Sakai, Jun’ichi [Faculty of Science and Engineering, Waseda University, 3-4-1, Okubo, Shinjuku-ku, Tokyo 169-8555 (Japan); Kagami Memorial Laboratory for Materials Science and Technology, Waseda University, 2-8-26, Nishiwaseda, Shinjuku-ku, Tokyo 169-0051 (Japan)

    2015-08-05

    Highlights: • Hydrogen charging inhibits localized corrosion of Ni–Ti superelastic alloy. • Increasing hydrogen content increases anodic current density. • Inhibition of localized corrosion remains after polishing or superelastic deformation. • Small amount of hydrogen charging may become new surface modification. - Abstract: Inhibition of the localized corrosion of Ni–Ti superelastic alloy in 0.9% NaCl solution has been attempted by charging with a small amount of hydrogen, which causes negligible hydrogen embrittlement. Upon a small amount of hydrogen charging, no pitting potential is observed in anodic polarization curves. From scanning electron microscope observations, localized corrosion is inhibited on the entire side surface of charged specimens. With increasing amount of charged hydrogen, the corrosion potential shifts in the less noble direction and the current density increases under anodic applied potential. When the hydrogen charged specimens are aged in the atmosphere at room temperature, the corrosion potential becomes almost the same as that of the non-charged specimen, but the inhibition of localized corrosion remains. The present study indicates that a small amount of hydrogen charging is effective for inhibiting the localized corrosion of the alloy in NaCl solution.

  16. Adsorption and corrosion inhibition effect of Schiff base molecules on the mild steel surface in 1 M HCl medium: a combined experimental and theoretical approach.

    Science.gov (United States)

    Saha, Sourav Kr; Dutta, Alokdut; Ghosh, Pritam; Sukul, Dipankar; Banerjee, Priyabrata

    2015-02-28

    Corrosion inhibition performance of 2-(2-hydroxybenzylideneamino)phenol (L(1)), 2-(5-chloro-2-hydroxybenzylideneamino)phenol (L(2)) and 2-(2-hydroxy-5-nitrobenzylideneamino)phenol (L(3)) on the corrosion behaviour of mild steel surface in a 1 M hydrochloric acid (HCl) solution is investigated by sophisticated analytical methods like potentiodynamic polarization, electrochemical impedance spectroscopy and weight loss measurements. Polarization studies showed that all the compounds are mixed type (cathodic and anodic) inhibitors and the inhibition efficiency (η%) increased with increasing inhibitor concentration. The inhibition actions of these Schiff base molecules are discussed in view of blocking the electrode surface by means of adsorption of the inhibitor molecule obeying the Langmuir adsorption isotherm. Scanning electron microscopy (SEM) studies of the metal surfaces confirmed the existence of an adsorbed film. Density functional theory (DFT) and molecular dynamics (MD) simulation have been used to determine the relationship between molecular configuration and their inhibition efficiencies. The order of inhibition performance obtained from experimental results is successfully verified by DFT and MD simulation.

  17. Properties of bacterial corrosion of stainless steel and its inhibition by protamine coating.

    Science.gov (United States)

    Matsumura, Yoshinobu; Yamada, Kaoru; Takahashi, Mitsuo; Kikuchi, Yasushi; Tsuchido, Tetsuaki

    2007-03-01

    We investigated characteristics of the corrosion of stainless steel specimens by bacteria and the effects of using antimicrobial coating on the surface for inhibiting corrosion. Bacillus sp. 2-A and Staphylococcus sp. 2-1 cells adhered tightly to a stainless steel SUS304 specimen, formed a microcolony or biofilm, and had highly corrosive activities. Microbially influenced corrosion (MC) was observed under or around adhering cells. However, dead cells were markedly less active than viable cells not only in corroding the specimen but also in adhering to its surface. The culture supernatant was not able to induce the corrosion of SUS304 effectively. A protamine coating on the specimen killed bacterial cells only on its surface, interfered with cell adhesion, and inhibited MC. From these results, adhesion of viable cells to the surface of a SUS304 specimen led to the outbreak of MC. Protamine was also found to be an effective substance tested for protecting the specimen from both cell adhesion and surface MC. We suggest that a protamine coating can be applied as a convenient and inexpensive corrosion prevention method.

  18. Inhibition of mild steel corrosion by 1,4,6-trimethyl-2-oxo-1,2-dihydropyridine-3-carbonitrile and synergistic effect of halide ion in 0.5 M H{sub 2}SO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Mourya, Punita, E-mail: mouryapunita025@gmail.com [Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India); Singh, Praveen [Department of Chemistry, Banaras Hindu University, Varanasi 221005 (India); Rastogi, R.B.; Singh, M.M. [Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India)

    2016-09-01

    Highlights: • TODPCN is a good corrosion inhibitor for mild steel in 0.5 M H{sub 2}SO{sub 4} solution. • Addition of iodide ion increases the inhibition efficiency of the studied nitrile derivative. • Inhibition efficiency successively increases with concentration. • XPS study has revealed the chemical composition of the protective film. - Abstract: The effect of iodide ions on inhibitive performance of 1,4,6-trimethyl-2-oxo-1,2-dihydropyridine-3-carbonitrile (TODPCN) on mild steel (MS) corrosion in 0.5 M H{sub 2}SO{sub 4} was studied using gravimetric and electrochemical measurements. TODPCN inhibits the corrosion of MS to the extent of 62.3% at its lowest concentration (0.5 mM) and its inhibition efficiency (η) further increases on increasing concentration at 298 K. The adsorption of TODPCN on MS was found to follow the Langmuir adsorption isotherm. The value of η increased on the addition of 2.0 mM KI. The value of synergism parameter being more than unity indicates that the enhanced η value in the presence of iodide ions is only due to synergism. Thus, a cooperative mechanism of inhibition exists between the iodide anion and TODPCN cations. The increase in surface coverage in the presence of KI indicates that iodide ions enhance the adsorption of TODPCN. The surface morphology of corroded/inhibited MS was studied by atomic force microscopy. X-ray photoelectron spectroscopy of inhibited MS surface was carried out to determine the composition of the adsorbed film. Some quantum chemical parameters and the Mulliken charge densities for TODPCN calculated by density functional theory provided further insight into the mechanism of inhibition.

  19. C10H18N2Na2O10 inhibition and adsorption mechanism on concrete steel-reinforcement corrosion in corrosive environments

    National Research Council Canada - National Science Library

    Okeniyi, Joshua Olusegun

    2016-01-01

    C10H18N2Na2O10 (ethylenediaminetetra-acetic acid disodium salt) inhibition and adsorption mechanism on the corrosion of steel-reinforcement corrosion in concrete immersed in corrosive environments were investigated in this paper...

  20. Inhibition of Mild Steel Corrosion in Acidic Medium by Aqueous Extract of Tridax procumbens L.

    OpenAIRE

    Ilayaraja, G.; Sasieekhumar, A. R.; Dhanakodi, P.

    2011-01-01

    The inhibition efficiency (IE) of an aqueous extract of Tridax procumbens L. in controlling corrosion of mild steel has been investigated by weight loss method in the absence and presence of corrosion inhibitor at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior of Tridax procumbens ...

  1. Inhibition of mild steel corrosion by 1,4,6-trimethyl-2-oxo-1,2-dihydropyridine-3-carbonitrile and synergistic effect of halide ion in 0.5 M H2SO4

    Science.gov (United States)

    Mourya, Punita; Singh, Praveen; Rastogi, R. B.; Singh, M. M.

    2016-09-01

    The effect of iodide ions on inhibitive performance of 1,4,6-trimethyl-2-oxo-1,2-dihydropyridine-3-carbonitrile (TODPCN) on mild steel (MS) corrosion in 0.5 M H2SO4 was studied using gravimetric and electrochemical measurements. TODPCN inhibits the corrosion of MS to the extent of 62.3% at its lowest concentration (0.5 mM) and its inhibition efficiency (η) further increases on increasing concentration at 298 K. The adsorption of TODPCN on MS was found to follow the Langmuir adsorption isotherm. The value of η increased on the addition of 2.0 mM KI. The value of synergism parameter being more than unity indicates that the enhanced η value in the presence of iodide ions is only due to synergism. Thus, a cooperative mechanism of inhibition exists between the iodide anion and TODPCN cations. The increase in surface coverage in the presence of KI indicates that iodide ions enhance the adsorption of TODPCN. The surface morphology of corroded/inhibited MS was studied by atomic force microscopy. X-ray photoelectron spectroscopy of inhibited MS surface was carried out to determine the composition of the adsorbed film. Some quantum chemical parameters and the Mulliken charge densities for TODPCN calculated by density functional theory provided further insight into the mechanism of inhibition.

  2. Corrosion of copper in aerated synthetic sea water solutions and its inhibition by 3-amino-1,2,4-triazole.

    Science.gov (United States)

    Sherif, El-Sayed M; Erasmus, R M; Comins, J D

    2007-05-15

    Corrosion of copper in aerated synthetic sea water (3.5% NaCl) solutions and its inhibition by 3-amino-1,2,4-triazole (ATA) have been studied using electrochemical, gravimetric, and pH measurements, along with Raman spectroscopy. Electrochemical measurements indicated that the presence of ATA and the increase of its concentration suppress the corrosion process on the copper surface. This effect decreases cathodic, anodic, and corrosion (jcorr) currents and corrosion rates (Kcorr), while increasing polarization resistance (Rp), surface coverage (theta), and inhibition efficiency (IE%). Weight loss measurements indicated that the dissolution of copper and the accompanying change of pH decreased to a minimum even after 24 days immersion due to the presence of ATA and the increase of its concentration. Raman investigations revealed that the inhibition of copper corrosion is achieved by strong adsorption of ATA molecules onto the copper surface, preventing it from being corroded easily.

  3. Corrosion Inhibition Studies of Mild Steel in Acid Medium Using Musa Acuminata Fruit Peel Extract

    Directory of Open Access Journals (Sweden)

    N. Gunavathy

    2012-01-01

    Full Text Available The inhibition effect of unripe fruit peel extract of Musa acuminata (Cultivar variety – Nendran (MNP on corrosion of mild steel in 1 N HCl has been investigated by weight loss and electrochemical impedance spectroscopy (EIS with various concentrations of the extract. The effect of temperature on the corrosion inhibition of mild steel in the temperature range of 30°C – 80°C was carried out. The results indicate that MNP extract act as an effective inhibitor in the acid environment and is of mixed type inhibitor having efficiency as high as 96% at 2% inhibitor concentration. The inhibition efficiency of MNP extract increases with the increase of concentration but decreases with the increase in temperature. The inhibitor achieves its inhibition by physical adsorption of nutrients of the peel extract on the surface of the mild steel. The experimental data revealed that the adsorption occurred according to the Langmuir and Temkin adsorption isotherm.

  4. Effect of three 2-allyl-p-mentha-6,8-dien-2-ols on inhibition of mild steel corrosion in 1 M HCl

    Directory of Open Access Journals (Sweden)

    S. Kharchouf

    2014-11-01

    Full Text Available 2-Allyl-p-mentha-6,8-dien-2-ols P1−P3 synthesized from carvone P are tested as corrosion inhibitors of steel in 1 M HCl using weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS methods. The addition of 2-allyl-p-mentha-6,8-dien-2-ols reduced the corrosion rate. Potentiodynamic polarisation studies clearly reveal that the presence of inhibitors does not change the mechanism of hydrogen evolution and that they act essentially as cathodic inhibitors. 2-Allyl-p-mentha-6,8-dien-2-ols tested adsorb on the steel surface according to Langmuir isotherm. From the adsorption isotherm some thermodynamic data for the adsorption process are calculated and discussed. EIS measurements show the increase of the charge-transfer resistance with the inhibitor concentration. The highest inhibition efficiency (92% is obtained for P1 at 3 g/L. The corrosion rate decreases with the rise of temperature. The corresponding activation energies are determined.

  5. Inhibition of 304 stainless steel corrosion in acidic solution by Ferula gumosa (galbanum) extract

    Energy Technology Data Exchange (ETDEWEB)

    Behpour, M.; Ghoreishi, S.M.; Soltani, N. [Department of Chemistry, Faculty of Science, University of Kashan (Iran); Kashani, M.K. [Department of Chemistry, Faculty of Science, University of Kashan (Iran); Barij Essence pharmaceutical, Kashan (Iran)

    2009-11-15

    The inhibition effect of the extract of galbanum (Ferula gummosa Boiss.) on the corrosion of 304 stainless steel in 2 M HCl solution was studied by weight loss measurements, Tafel polarization, and electrochemical impedance spectroscopy (EIS) methods. It was found that the inhibition efficiency (IE) increases as the extract concentration is increased. Tafel polarization method revealed the mixed mode inhibition of galbanum extract (GE) with predominant control of anodic reaction. The effect of temperature on the corrosion behavior of steel indicates that inhibition efficiency of the natural substance increases with the rise in temperature. At all temperatures, the adsorption of the extract components onto the steel surface was found to follow the Temkin adsorption isotherm. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  6. Corrosion inhibition efficiency of linear alkyl benzene derivatives for carbon steel pipelines in 1M HCl

    Directory of Open Access Journals (Sweden)

    A.M. Al-Sabagh

    2011-06-01

    Full Text Available Linear alkyl benzene sulfonic acid (L and three of its ester derivatives (L1, L2, L3 were prepared, followed by quaternization of these esters (L1Q, L2Q, L3Q. The corrosion inhibition effect on carbon steel in 1 M HCl was studied using weight loss and potentiodynamic polarization measurements. The adsorption of the inhibitors on carbon steel surface obeyed the Langmuir’s adsorption isotherm. The associated activation energy of corrosion and other thermodynamic parameters such as enthalpy (ΔH∗, entropy (ΔS∗ of activation, adsorption–desorption equilibrium constant (Kads, standard free energy of adsorption (ΔGoads, heat (ΔHoads, and entropy of adsorption (ΔSoads were calculated to elaborate the corrosion inhibition mechanism.

  7. A computational study on corrosion inhibition performances of novel quinoline derivatives against the corrosion of iron

    Science.gov (United States)

    Erdoğan, Şaban; Safi, Zaki S.; Kaya, Savaş; Işın, Dilara Özbakır; Guo, Lei; Kaya, Cemal

    2017-04-01

    In this computational study, the adsorption and corrosion inhibition properties of some novel quinoline derivatives namely, 2-amino-7-hydroxy-4-phenyl-1,4-dihydroquinoline-3-carbonitrile (Q1), 2-amino-7-hydroxy-4-(p-tolyl)-1,4-dihydroquinoline-3-carbonitrile (Q2), 2-amino-7-hydroxy-4-(4-methoxyphenyl)-1,4-dihydroquinoline-3-carbonitrile) (Q3) and 2-amino-4-(4-(dimethylamino)phenyl)-7-hydroxy-1,4-dihydroquinoline-3-carbonitrile (Q4) on the corrosion of iron were investigated using quantum chemical and molecular dynamics simulation approaches. Quantum chemical calculations section of the study provides enough calculation and discussion on the relationship between corrosion inhibition and global reactivity descriptors such as EHOMO, ELUMO, HOMO-LUMO energy gap (ΔE), chemical hardness (η), softness (σ), electronegativity (χ), chemical potential (μ), electrophilicity (ω), nucleophilicity (ɛ), electrons transferred from inhibitors to metal surface (ΔN), initial molecule-metal interaction energy (Δψ), total electronic energy (E), the energy change during electronic back-donation process (ΔEb-d). The adsorption behaviors of studied compounds on Fe (110) surface were investigated with the help of molecular dynamics simulation approach. The binding energies calculated on Fe (110) surface of mentioned quinoline derivatives followed the order: Q4 > Q3 > Q2 > Q1. It should be noted that the results obtained in the study are in good agreement with experimental inhibition efficiency results earlier reported.

  8. Anti-Corrosive Effect of Tridax Procumbens – Zn2+ System Controlling the Corrosion of Carbon Steel

    OpenAIRE

    Kumar, C.; Mohan, R

    2014-01-01

    The corrosion inhibition efficiency (IE) of an aqueous extract Tridax Procumbens(TP) in controlling the corrosion of carbon steel aqueous medium containing 60 ppm of chloride ions in absence and presence of Zn2+ has been studied by weight loss method. The formulation consisting of 1 ml of Tridax Procumbens extract and 150 ppm of Zn2+ offers 96% inhibition efficiency. The synergistic effect exists between Tridax Procumbens and Zn2+ system. Polarization study shows that the Trida...

  9. Investigation of the inhibitive effect of N-phosphono-methyl-glycine on the corrosion of carbon steel in neutral solutions by electrochemical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Pech-Canul, M.A.; Chi-Canul, L.P.

    1999-10-01

    Steady-state current-voltage curves for various disk rotation rates were combined with electrochemical impedance measurements to investigate the corrosion inhibition of carbon steel by N-phosphono-methyl-glycine (NPMG)/Zn{sup 2+} mixtures with a concentration ratio of 1:1 between NPMG and zinc cations in a model water. Efficiency of the NPMG/Zn{sup 2+} formulation increased with concentration in the range from 10 ppm to 100 ppm, and it performed as a mixed type inhibitor, retarding the rate of the anodic and cathodic reactions. Analysis of impedance measurements by means of a simple model suggested that the oxygen reduction reaction was under mixed activation-diffusion control in blank solutions and nearly under diffusion control in the inhibited solutions. Results showed that with increasing rotation speeds, the rate of oxygen diffusion through the porous layer covering the electrode surface increased and the anodic dissolution reaction became slower.

  10. KINETICS OF SOLUBLE CHROMIUM REMOVAL FROM CONTAMINATED WATER BY ZEROVALENT IRON MEDIA: CORROSION INHIBITION AND PASSIVE OXIDE EFFECTS. (R825223)

    Science.gov (United States)

    Permeable reactive barriers containing zerovalent iron are being increasingly employed for in situ remediation of groundwater contaminated with redox active metals and chlorinated organic compounds. This research investigated the effect of chromate concentration on...

  11. Physicochemical studies of glucose, gellan gum, and hydroxypropyl cellulose--inhibition of cast iron corrosion.

    Science.gov (United States)

    Rajeswari, Velayutham; Kesavan, Devarayan; Gopiraman, Mayakrishnan; Viswanathamurthi, Periasamy

    2013-06-05

    Glucose, gellan gum, and hydroxypropyl cellulose were studied against the acid corrosion of cast iron by means of weight loss, potentiodynamic polarization, and AC impedance spectroscopy techniques. The inhibition efficiency was found to increase with increasing concentration of the inhibitors. The effect of immersion time and temperature were also studied. The addition of potassium iodide to the corrosion-inhibition system showed both antagonism and synergism toward inhibition efficiency. Polarization studies revealed the mixed-type inhibiting nature of the carbohydrates. The adsorption of inhibitors on the cast iron surface obeys Langmuir adsorption isotherm model, both in presence and absence of KI. Physical interaction between the inhibitor molecules and the iron surface was suggested by the thermochemical parameters, rather than chemical interaction.

  12. Is the analysis of molecular electronic structure of corrosion inhibitors sufficient to predict the trend of their inhibition performance

    Energy Technology Data Exchange (ETDEWEB)

    Kokalj, Anton, E-mail: tone.kokalj@ijs.s [Department of Physical and Organic Chemistry, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia)

    2010-12-30

    The often used approach in the corrosion inhibition studies employing quantum chemical calculations that relies on the correlation between molecular electronic structure parameters and inhibition effectiveness is critically examined. It is shown that the inhibition performance of three selected triazole-based corrosion inhibitors for copper - 3-amino-1,2,4-triazole (ATA), benzotriazole (BTAH), and 1-hydroxybenzotriazole (BTAOH) - cannot be explained on this basis in a sound manner. As the effectiveness of inhibitors is due to several phenomena, the outcome depends on the interplay between them and although molecular electronic parameters may provide many necessary elements, the involved effects can be estimated only approximately which may not always suffice. This supports the proposition that in general molecular electronic properties cannot be directly related to inhibition effectiveness - the actual relation is more involved - thus emphasizing the importance of a rigorous modeling of the inhibitor-surface interaction in the corrosion inhibition studies.

  13. Effect of corrosion on flexural bond strength

    Directory of Open Access Journals (Sweden)

    Akshatha Shetty

    2014-09-01

    Full Text Available Corrosion is one of the main causes affecting durability of structures. Corrosion effects on structures cannot be ignored and replaced. To understand the performance of structures there is a need to study the rate at which different corrosion levels occur. Hence the present investigation has been taken up to study the behaviour of NBS (National Bureau of Standard beam specimens made up of Ordinary Portland Cement (OPC and Portland Pozzolona Cement (PPC concrete matrix were subjected to accelerated corrosion for different corrosion levels of 2.5 % to 10 % at 2.5 % interval. Results are compared with those for control beam specimen. It is observed that bond stress value decreases with the increase in corrosion levels. Also corrosion leads to the decline of load carrying capacity.

  14. Inhibition of Chloride Induced Crevice Corrosion in Alloy 22 by Fluoride Ions

    Energy Technology Data Exchange (ETDEWEB)

    Carranza, R M; Rodr?guez, M A; Rebak, R B

    2005-10-09

    Alloy 22 (N06022) is highly resistant to localized corrosion. Alloy 22 may be susceptible to crevice corrosion in pure chloride (Cl{sup -}) solutions under aggressive environmental conditions. The effect of the fluoride (F{sup -}) over the crevice corrosion induced by chloride ions is still not well established. The objective of the present work was to explore the crevice corrosion resistance of this alloy to different mixtures of fluorides and chlorides. Cyclic potentiodynamic polarization (CPP) tests were conducted in deaerated aqueous solutions of pure halide ions and also in different mixtures of chloride and fluoride at 90 C and pH 6. The range of chloride concentration [Cl{sup -}] was 0.001 M {le} [Cl{sup -}] {le} 1 M and the range of molar fluoride to chloride ratio [F{sup -}]/[Cl{sup -}] was 0.1 {le} [F{sup -}]/[Cl{sup -}] {le} 10. Results showed that Alloy 22 was susceptible to crevice corrosion in all the pure chloride solutions but not in the pure fluoride solutions. Fluoride ions showed an inhibitor behavior only in mixtures with a molar ratio [F{sup -}]/[Cl{sup -}] > 2. For mixtures with a molar ratio [F{sup -}]/[Cl{sup -}] of 7 and 10 the inhibition of crevice corrosion was complete.

  15. EIS study on corrosion and scale processes and their inhibition in cooling system media

    Energy Technology Data Exchange (ETDEWEB)

    Marin-Cruz, J. [Universidad Autonoma Metropolitana, Departamento de Quimica, Apdo. Postal 55-534, 09340 Mexico, DF (Mexico) and Instituto Mexicano del Petroleo, Coordinacion de Ingenieria Molecular, Competencia de Quimica Aplicada, Eje Central Lazaro Cardenas No. 152, CP 07730, DF (Mexico)]. E-mail: jmarin@imp.mx; Cabrera-Sierra, R. [Universidad Autonoma Metropolitana, Departamento de Quimica, Apdo. Postal 55-534, 09340 Mexico, DF (Mexico); Escuela Superior de Ingenieria Quimica e Industrias Extractivas (ESIQIE-IPN), Departamento de Metalurgia, UPALM Zacatenco AP 75-874, CP 07338, DF (Mexico); Pech-Canul, M.A. [Departamento de Fisica Aplicada, Centro de Investigacion y de Estudios, Avanzados del IPN, AP 73 Cordemex, CP 97310, Merida, Yucatan (Mexico); Gonzalez, I. [Universidad Autonoma Metropolitana, Departamento de Quimica, Apdo. Postal 55-534, 09340 Mexico, DF (Mexico)]. E-mail: igm@xanum.uam.mx

    2006-01-20

    A study of the carbon steel/cooling water interface was carried out using electrochemical impedance spectroscopy (EIS). EIS spectra reveal that a layer of corrosion and scale products forms naturally and evolves with the immersion time modifying the carbon steel/cooling water interface and giving rise to corrosion and scale processes. In addition, the nature of the layer formed on the metal was found to depend on the inhibitor used. It was established that the corrosion inhibitor (hydroxyphosphonoacetic acid (HPA)) chelates with Ca(II) ion generating a layer with resistive properties that provides good protection against corrosion. In contrast, the scale inhibitor (1-hydroxy-ethane-1,1-diphosphonic acid (HEDP)) is incorporated into the calcium carbonate crystals at the surface, modifying the structure and diminishing scale formation in the surface; this additive additionally inhibited corrosion. These observations were supported by scanning electronic microscopy (SEM) and corroborate previous studies performed by other techniques on HPA and HEDP. Finally, a synergistic effect was observed between these inhibitors that provides good protection to steel against corrosion and scaling in cooling media.

  16. Corrosion Inhibition of Mild Steel in Seawater using Jatropha Stem

    Directory of Open Access Journals (Sweden)

    Olawale Olamide

    2016-10-01

    Full Text Available The present work investigate the inhibition of Jatropha Stem Extract (JSE in sea water using mild steel coupons of dimension 5 × 5 × 0.5 cm. The cupons were immersed in test solutions of sea water and varied concentrations of extracts of 0.1g/l to 0.9g/l was used. The functional groups of the compounds was analyzed using an FTIR. The results showed that as the concentration of the extract increases, there was a reduction in the corrosion rates. Furthermore, as the extract concentrations increased from 0.1g/l to 0.4g/l at 48hrs exposure time, the weight loss decreased by 14.3% in the medium. However, the Jatropha Stem Extract was absorbed on the substrate surface to inhibit corrosion, the morphology of phases formed from the scanning Electron Microscopy examination confirmed this trend. Hence, JSE is a good and safe inhibitor in sea water solution. The FT-IR results also indicates the presence of active corrosion inhibitor present in the Jatropha Stem.

  17. Study on the Synthesis and Corrosion Inhibition Performance of Mannich-Modified Imidazoline

    Directory of Open Access Journals (Sweden)

    Xiangjun Kong

    2016-07-01

    Full Text Available A novel Mannich-modified imidazoline (MMI as cationic emulsifier was synthesised for corrosion harm reduction, through three steps — acylation, cyclization, and Mannich reaction. The surface activity was characterized by determination of surface tensions and critical micelle concentration (CMC. The corrosion inhibition performance of five types of steels in the simulated corrosion solution in the presence of the MMI was investigated by static weight loss tests. The results showed that the MMI had good surface activities, with CMC of 19.8 μg g−1 and surface tension of 36.4 mN m−1. The corrosion test results indicated that the corrosion rates of different materials were decreased significantly, and degrees of corrosion inhibition were always higher than 80.0 %. The main inhibition mechanism was most likely due to the adsorption of the corrosion inhibitor on the steel surface, leading to the prevention of corrosion medium from the metal surface.

  18. Corrosion inhibition of C38 steel in 1 M hydrochloric acid medium by alkaloids extract from Oxandra asbeckii plant

    Energy Technology Data Exchange (ETDEWEB)

    Lebrini, M. [Laboratoire Materiaux et Molecules en Milieu Amazonien, CNRS 8172-UMR ECOFOG, Campus Trou Biran, Cayenne 97337, French Guiana (France); Robert, F.; Lecante, A. [Laboratoire Materiaux et Molecules en Milieu Amazonien, UAG-UMR ECOFOG, Campus Trou Biran, Cayenne 97337, French Guiana (France); Roos, C., E-mail: christophe.roos@guyane.univ-ag.f [Laboratoire Materiaux et Molecules en Milieu Amazonien, UAG-UMR ECOFOG, Campus Trou Biran, Cayenne 97337, French Guiana (France)

    2011-02-15

    Research highlights: The inhibition effect of alkaloid extract of Oxandra asbeckii plant on the corrosion of C38 steel in 1 M hydrochloric acid solution has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Oxandra asbeckii extract examined acted as an efficient corrosion inhibitor in 1 M HCl. Polarization studies showed that Oxandra asbeckii extract was a mixed-type inhibitor and its inhibition efficiency increased with the inhibitor concentration. - Abstract: The inhibition effect of alkaloids extract from Oxandra asbeckii plant (OAPE) on the corrosion of C38 steel in 1 M hydrochloric acid solution has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The corrosion inhibition efficiency increases on increasing plant extracts concentration. Cathodic and anodic polarization curves show that OAPE is a mixed-type inhibitor. The effect of temperature on the corrosion behavior of C38 steel in 1 M HCl with and without addition of plant extract was studied in the temperature range 25-55 {sup o}C. The thermodynamic functions of dissolution and adsorption processes were calculated from experimental polarization data and the interpretation of the results are given. The adsorption of this plant extract on the C38 steel surface obeys the Langmuir adsorption isotherm. Surface analysis (Raman) was also carried out to establish the corrosion inhibitive property of this plant extract in HCl solution.

  19. Quantum Chemical Study on the Corrosion Inhibition of Some Oxadiazoles

    Directory of Open Access Journals (Sweden)

    Hong Ju

    2015-01-01

    Full Text Available Quantum chemical calculations based on DFT method were performed on three nitrogen-bearing heterocyclic compounds used as corrosion inhibitors for the mild steel in acid media to determine the relationship between the molecular structure of inhibitors and inhibition efficiency. The structural parameters, such as energy and distribution of highest occupied molecular orbital (HOMO and lowest unoccupied molecular orbital (LUMO, the charge distribution of the studied inhibitors, the absolute electronegativity (χ values, and the fraction of electrons (ΔN transfer from inhibitors to mild steel were also calculated and correlated with inhibition efficiencies. The results showed that the inhibition efficiency of inhibitors increased with the increase in energy of HOMO and decrease in energy gap of frontier molecular orbital, and the areas containing N and O atoms are most possible sites for bonding the steel surface by donating electrons to the mild steel.

  20. Corrosion inhibition of aluminum 6063 using some pharmaceutical compounds

    Energy Technology Data Exchange (ETDEWEB)

    Fouda, A.S. [Department of Chemistry, Faculty of Science, El-Mansoura University, El-Mansoura 35516 (Egypt)], E-mail: asfouda@mans.edu.eg; Al-Sarawy, A.A. [Department of Chemistry, Faculty of Engineering, El-Mansoura University, El-Mansoura (Egypt); Ahmed, F.Sh. [Department of Chemistry, Faculty of Science (Demitta), El-Mansoura University, El-Mansoura (Egypt); El-Abbasy, H.M. [Department of Chemistry, Faculty of Science, El-Mansoura University, El-Mansoura 35516 (Egypt)

    2009-03-15

    The corrosion inhibition characteristics of some pharmaceutical compounds on aluminum 6063 in 0.5 mol l{sup -1} H{sub 3}PO{sub 4} has been studied using weight loss and galvanostatic polarization techniques. Results showed that the inhibition occurs through adsorption of the inhibitor molecules on the metal surface. The inhibition efficiency increased with increasing inhibitor concentration, but decreased with increasing temperature. The adsorption of first group pharmaceutical compounds on the metal surface is found to obey Frumkin's adsorption isotherm, but the adsorption of second group pharmaceutical compounds is found to obey Temkin's adsorption isotherm. Thermodynamic parameters for adsorption process were determined. Galvanostatic polarization studies showed that first and second groups' pharmaceutical compounds are mixed-type inhibitors and the results obtained from the two techniques are in good agreement.

  1. Corrosion inhibition of magnesium heated in wet air, by surface fluoridation; Inhibition de la corrosion du magnesium chauffe dans l'air humide, par fluoruration superficielle

    Energy Technology Data Exchange (ETDEWEB)

    Caillat, R.; Darras, R.; Leclercq, D. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The maximum temperature (350 deg. C) of magnesium corrosion resistance in wet air may be raised to 490-500 deg. C by the formation of a superficial fluoride film. This can be obtained by two different ways: either by addition of hydrofluoric acid to the corroding medium in a very small proportion such as 0,003 mg/litre; at atmospheric pressure, or by dipping the magnesium in a dilute aqueous solution of nitric and hydrofluoric acids at room temperature before exposing it to the corroding atmosphere. In both cases the corrosion inhibition is effective over a very long time, even several thousand hours. (author) [French] La temperature limite (350 deg. C) de resistance du magnesium a la corrosion par l'air humide, peut etre elevee jusque 490-500 deg. C par la formation d'une couche fluoruree superficielle. Deux procedes permettent d'obtenir ce resultat: l'atmosphere corrodante peut etre additionnee d'acide fluorhydrique a une concentration aussi faible que 0,003 mg/litre, a la pression atmospherique, ou bien le magnesium peut etre traite a froid, avant exposition a la corrosion, dans une solution aqueuse diluee d'acides nitrique et fluorhydrique. Dans les deux cas, la protection est assuree, meme pour de tres longues durees d'exposition: plusieurs milliers d'heures. (auteur)

  2. Influence of Benzotriazole on Corrosion Inhibition of Mild Steel in Citric Acid Medium

    OpenAIRE

    P. Matheswaran; A. K. Ramasamy

    2010-01-01

    Benzotriazole an organic compounds has been studied as corrosion inhibition for mild steel in 1 N citric acid by weight loss method. The result showed that the corrosion inhibition efficiency of the compound was found to be varying with the temperature and acid concentration. Also it was found that the corrosion inhibition behaviour of benzotriazole is better when the concentration of inhibitor is increased. The kinetic treatment of the results shows first order kinetics.

  3. Standard test method for initial screening of corrosion inhibiting admixtures for steel in concrete

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This test method covers a procedure for determining the effects of chemical admixtures on the corrosion of metals in concrete. This test method can be used to evaluate materials intended to inhibit chloride-induced corrosion of steel in concrete. It can also be used to evaluate the corrosivity of admixtures by themselves or in a chloride environment. This test is not applicable for emulsions. 1.2 &solely-SI-units; 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  4. On the relationship between corrosion inhibiting effect and molecular structure of 2,5-bis(n-pyridyl)-1,3,4-thiadiazole derivatives in acidic media: Ac impedance and DFT studies

    Energy Technology Data Exchange (ETDEWEB)

    Bentiss, F., E-mail: fbentiss@enscl.f [Laboratoire de Chimie de Coordination et d' Analytique (LCCA), Faculte des Sciences, Universite Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco); Mernari, B. [Laboratoire de Chimie de Coordination et d' Analytique (LCCA), Faculte des Sciences, Universite Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco); Traisnel, M. [Unite Materiaux et Transformations (UMET), Ingenierie des Systemes Polymeres, CNRS UMR 8207, ENSCL, B.P. 90108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, H. [Laboratoire de Spectrochimie Infrarouge et Raman (LASIR), UMR-CNRS 8516, Universite des Sciences et Technologies de Lille, Batiment C5, F-59655 Villeneuve d' Ascq Cedex (France); Lagrenee, M., E-mail: michel.lagrenee@ensc-lille.f [Unite de Catalyse et de Chimie du Solide (UCCS), UMR-CNRS 8181, ENSCL, B.P. 90108, F-59652 Villeneuve d' Ascq Cedex (France)

    2011-01-15

    Research highlights: {yields}2,5-Bis(n-pyridyl)-1,3,4-thiadiazoles (n-PTH) act as good inhibitors for the mild steel in acidic media. {yields}The inhibiting protection depends on the position of the nitrogen on the pyridinium substituent according to order 3-PTH > 2-PTH > 4-PTH. {yields}The adsorption of n-PTH is found to follow the Langmuir's adsorption isotherm. {yields}Data obtained from quantum chemical calculations using DFT method were correlated to the experimentally obtained inhibition efficiencies. - Abstract: The inhibition properties of 2,5-bis(n-pyridyl)-1,3,4-thiadiazoles (n-PTH) on corrosion of mild steel in different acidic media (1 M HCl, 0.5 M H{sub 2}SO{sub 4} and 1 M HClO{sub 4}) were analyzed by electrochemical impedance spectroscopy (EIS). The n-PTH derivatives exhibit good inhibition properties in different acidic solutions and the calculated values of {Delta}G{sub ads}{sup 0} revealed that the adsorption mechanism of n-PTH on steel surface is mainly due to chemisorption. While in 1 M HClO{sub 4}, both 2-PTH and 4-PTH isomers stimulate the corrosion process especially at low concentrations. Quantum chemical calculations using the density functional theory (DFT) were performed on n-PTH derivatives to determine the relationship between molecular structure and their inhibition efficiencies. The results of the quantum chemical calculations and experimental inhibition efficiency were subjected to correlation analysis and indicate that the inhibition effects of n-PTH may be explained in terms of electronic properties.

  5. Assessing Level and Effectiveness of Corrosion Education in the UAE

    Directory of Open Access Journals (Sweden)

    Hwee Ling Lim

    2012-01-01

    Full Text Available The consequences of corrosion can be minimized by an engineering workforce well trained in corrosion fundamentals and management. Since the United Arab Emirates incurs the second highest cost of corrosion after Saudi Arabia, this paper examined the quality of corrosion education in the UAE. Surveys with academia and industry respondents showed that dedicated corrosion courses and engineering courses that integrated corrosion into the curricula were available in UAE universities, but graduates had insufficient knowledge of corrosion engineering and superficial understanding of corrosion in real-life design contexts. The effectiveness of corrosion education is determined by both competence in corrosion knowledge/skills and availability of resources (faculty and research. Though most departments would not hire new corrosion-specialist faculty, department research efforts and industry partnerships in corrosion research were present. The paper concluded with recommendations for improving knowledge and skills of future engineers in corrosion and enhancing corrosion instruction to better meet industry needs.

  6. Inhibition of the Corrosion of Mild Steel in Acid Media by Naturally Occurring Acacia Senegal

    Directory of Open Access Journals (Sweden)

    Urvija Garg

    2010-01-01

    Full Text Available The inhibition of corrosion of mild steel in HCl solution by naturally occurring Acacia Senegal has been studied in relation to the concentration of inhibitor and concentration of corrosive medium. It has been observed that the Acacia Senegal alcoholic extract acts as a good corrosion inhibitor in hydrochloric acid solution and the adsorption of the extract provides a good protection against mild steel corrosion.

  7. 烟柴杆提取物与碘化钾的缓蚀协同效应%Synergistic effect of corrosion inhibition of tobacco rob extract and potassium iodide

    Institute of Scientific and Technical Information of China (English)

    郭勇; 高美丹; 王艳; 王荷芳; 胡荣彬

    2015-01-01

    The corrosion i nhibition capacity of tobacco rob extract for N80 steel in hydrochloride solutions and its synergistic effect with potassium iodide are investigated. The results show that tobacco rob extract has excellent corrosion inhibition efficiency,and the inhibition efficiency increases further when tobacco rob extract combines with potassium iodide. From the electrochemical polarization curve,before and after the combination,the tobacco rob extract are both a kind of mixed-type corrosion inhibitor and the inhibition mechanism is geometric covering effect. By fitting the weight loss data,the result shows that after the combination of tobacco rob extract with potassium iodide,the adsorption on the surface of N80 steel obeys the Langmuir’s adsorption isotherm equation.%研究了烟柴杆提取物在盐酸介质中对N80钢的缓蚀性能及其与碘化钾复配的协同效应。结果表明,烟柴杆提取物具有良好的缓蚀性能,与碘化钾复配后缓蚀性能进一步提高。电化学极化曲线表明,复配前后烟柴杆提取物均为混合型缓蚀剂,其作用机理为几何覆盖效应。对失重数据进行拟合,结果表明烟柴杆提取物与碘化钾复配后在N80钢表面的吸附服从Langmuir吸附等温方程。

  8. Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by New Coumarin

    Directory of Open Access Journals (Sweden)

    Abdul Amir H. Kadhum

    2014-06-01

    Full Text Available A new coumarin derivative, N,N′-((2E,2′E-2,2′-(1,4-phenylenebis (methanylylidenebis(hydrazinecarbonothioylbis(2-oxo-2H-chromene-3-carboxamide PMBH, was synthesized and its chemical structure was elucidated and confirmed using spectroscopic techniques (Infrared spectroscopy IR, Proton nuclear  magnetic resonance, 1H-NMR and carbon-13 nuclear magnetic resonance 13C-NMR. The corrosion inhibition effect of PMBH on mild steel in 1.0 M HCl was investigated using corrosion potential (ECORR, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS, and electrochemical frequency modulation (EFM measurements. The obtained results indicated that PMBH has promising inhibitive effects on the corrosion of mild steel in 1.0 M HCl across all of the conditions examined. Scanning electron microscopy (SEM was used to investigate the morphology of the mild steel before and after immersion in 1.0 M HCl solution containing 0.5 mM of PMBH. Surface analysis revealed improvement of corrosion resistance in presence of PMBH.

  9. Inhibition of hot salt corrosion by metallic additives

    Science.gov (United States)

    Deadmore, D. L.; Lowell, C. E.

    1978-01-01

    The effectiveness of several potential fuel additives in reducing the effects of sodium sulfate-induced hot corrosion was evaluated in a cyclic Mach 0.3 burner rig. The potential inhibitors examined were salts of Al, Si, Cr, Fe, Zn, Mg, Ca, and Ba. The alloys tested were IN-100, U-700, IN-738, IN-792, Mar M-509, and 304 stainless steel. Each alloy was exposed for 100 cycles of 1 hour each at 900 C in combustion gases doped with the corrodant and inhibitor salts and the extent of attack was determined by measuring maximum metal thickness loss. The most effective and consistent inhibitor additive was Ba (NO3)2 which reduced the hot corrosion attack to nearly that of simple oxidation.

  10. Inhibition of acidic corrosion of aluminum by triazoline derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Khamis, E. (Alexandria Univ., Ibrahimia (Egypt). Dept. of Chemistry); Atea, M. (Alexandria Univ., Ibrahimia (Egypt). Dept. of Materials Science)

    1994-02-01

    Inhibition of the corrosion of aluminum (Al) in hydrochloric acid (HCl) by some triazoline derivatives was studied in relation to the concentration of the inhibitors using gasometry, the weight-loss method, and the potentiodynamic technique. All compounds investigated were found to be inhibitors of the mixed type. The inhibitory character of the additives depended upon the +R (resonance) and +I (inductive) powers of alkyl or aryl groups of the triazoline derivatives. Inhibition was ascribed to the adsorption of the inhibitor onto the metal oxide surface following the Flory-Huggins isotherm. The compounds were adsorbed on the metal surface. Each molecule of the inhibitors occupied an average of 3.8 active sites on the metal surface. The values of activation free energies varied between [minus]30 kJ/mol and [minus]45 kJ/mol.

  11. Inhibitive effect of Ce(III) and La(III) cations for AA2219 aluminium alloy corrosion in sodium chloride medium

    Energy Technology Data Exchange (ETDEWEB)

    Venkatasubramanian, G., E-mail: venkatguru_1966@yahoo.co.in [Department of Chemistry, Sathyabama University, Jeppiaar Nagar, Chennai 600119 (India); Sheik Mideen, A. [Department of Chemistry, Sathyabama University, Jeppiaar Nagar, Chennai 600119 (India); Jha, Abhay K. [Materials Processing Division, Vikram Sarabhai Space Centre, Indian Space Research Organisation, Thiruvananthapuram 695022 (India); Kulandainathan, M. Anbu [Electro Organic Chemistry Division, Central Electrochemical Research Institute, Karaikudi 630006 (India)

    2014-11-14

    In this paper, the rare earth chlorides were used to mitigate the dealloying of Al{sub 2}Cu intermetallic particles in aluminium alloy 2219-T87 plate exposed to 0.6 M NaCl solution. The negative shift of cathodic branches of potentiodynamic polarisation curves revealed the cathodic inhibition towards intermetallic dealloying. The low and high frequency time constants obtained from electrochemical impedance spectra revealed an increase in the corrosion resistance due to precipitation of rare earth oxides/hydroxides on the porous surface of native oxide film of aluminium alloy. Scanning electron microscopy coupled with energy dispersive X-ray analysis and atomic force microscopy revealed that intermetallic inclusions are the sites for the formation of cerium and lanthanum deposits which suppress copper redeposition and minimise galvanic interactions between the matrix and Al{sub 2}Cu particles. - Graphical abstract: Scanning electron microscopy and atomic force microscopy reveal the intermetallic inclusions, the sites for the formation of cerium and lanthanum oxide/hydroxide precipitates which prevent intermetallic de-alloying, suppress copper redeposition and minimise galvanic interactions in aluminium alloy 2219-T87 plate. - Highlights: • Ce{sup 3+} and La{sup 3+} act as cathodic inhibitors for AA2219-T87 aluminium alloy in 0.6 M NaCl. • Al{sub 2}Cu intermetallic particles are the sites for the formation of Ce and La precipitates. • The decrease in surface potential by rare earth chlorides confirms their inhibition.

  12. Electrochemical study of corrosion inhibition of stainless steel in phosphoric medium

    Energy Technology Data Exchange (ETDEWEB)

    Hnini, K.; Chtaini, A. [Laboratoire d' Electrochimie et de Bio Corrosion, Faculte des Sciences et Techniques, Beni-Mellal (Morocco); Khouili, M.; Elbouadili, A. [Laboratoire de Chimie Organique et Analytique, Faculte des Sciences et Techniques, Beni-Mellal (Morocco)

    2004-07-01

    The corrosion of metals represents a terrible waste of both natural resources and money, the failure of some stainless steel resulting from pitting corrosion is some times considered a technological problem, consequently, much effort has been expended in attempting to understand and overcome the corrosion therefore, many stainless steel/ environment combinations have been studied. The use of heterocyclic compounds as inhibitors is one of the most practical methods for protection against corrosion in acidic media. In continuation of our work on development of macrocyclic compounds as corrosion inhibitors we report in our study the corrosion inhibiting behaviour of organic compound Methoxy-2-Allyl-4 Phenol (MAP) containing coordinating and conjugation groups, at three forms (natural, polymerized and chemically treated) on the corrosion of stainless steel in phosphoric acid. This study focused on the comparison for corrosion inhibition proprieties of these different applications using potentiodynamic polarization, electrochemical impedance spectroscopy and SEM. The specimen was evaluated to determine change in his corrosion potential and resistance polarization; These MAP products have exhibited corrosion inhibition by maintaining a high resistance polarization (low corrosion rate) in each application. These results reveal that this compound is efficient inhibitor in all forms; the most inhibition efficiency is obtained with polymerized form. To further evaluate the test data, the steel surfaces were analyzed using scanning electron microscopy, SEM observations of surface treated concrete confirmed presence of inhibitor on the steel surfaces. (authors)

  13. Corrosion effects on soda lime glass

    NARCIS (Netherlands)

    Veer, F.A.; Rodichev, Y.M.

    2010-01-01

    Although soda lime glass is the most common used transparent material in architecture, little is known about the corrosion effects on long term strength and the interaction between corrosion and defects. Extensive testing on soda lime bars under different environmental conditions and different degre

  14. Corrosion effects on soda lime glass

    NARCIS (Netherlands)

    Veer, F.A.; Rodichev, Y.M.

    2010-01-01

    Although soda lime glass is the most common used transparent material in architecture, little is known about the corrosion effects on long term strength and the interaction between corrosion and defects. Extensive testing on soda lime bars under different environmental conditions and different

  15. Corrosion Inhibition by Tithonia diversifolia (Hemsl) A. Gray leaves extract for 304 SS in hydrochloric acid solution

    Science.gov (United States)

    Firdausi, S.; Kurniawan, F.

    2016-04-01

    The inhibition effect of Tithonia diversifolia (Hemsl) A. Gray leaves extract on the corrosion phenomena of 304 SS in 1 M HCl has been studied by polarization potentiodynamic. The powder of T. diversifolia was extracted by demineralized water which was cultivated in East Java, Indonesia. The extract was characterized by FTIR spectrophotometer. The presence of T. diversifolia can inhibit the corrosion rate of 304 SS. The efficiency inhibition value of 2 g/L T. diversifolia leaves extract reached up to 77.27% at room temperature.

  16. Attenuated total reflectance spectroscopy of simultaneous processes: Corrosion inhibition of cuprous oxide by benzotriazole

    Science.gov (United States)

    Bratescu, Maria Antoaneta; Allred, Daniel B.; Saito, Nagahiro; Sarikaya, Mehmet; Takai, Osamu

    2008-03-01

    Attenuated total reflectance (ATR) spectroscopy was used to perform in situ studies of the corrosion inhibition of cuprous oxide (Cu 2O) by benzotriazole (BTA) in aqueous solution at concentrations from 1 to 20 μM. Because two separate processes occur simultaneously, that of Cu 2O corrosion and corrosion inhibition by BTA adsorption, the spectral information was subjected to deconvolution by a conjugate gradient minimization algorithm. Under these conditions, a solution phase concentration of 7-10 μM BTA nearly completely inhibited the corrosion of Cu 2O in deionized water. Using a Langmuir adsorption model, this represented only 25% of the maximally covered surface area.

  17. Inhibition of Mild Steel Corrosion in Acidic Medium by Aqueous Extract of Tridax procumbens L.

    Directory of Open Access Journals (Sweden)

    G. Ilayaraja

    2011-01-01

    Full Text Available The inhibition efficiency (IE of an aqueous extract of Tridax procumbens L. in controlling corrosion of mild steel has been investigated by weight loss method in the absence and presence of corrosion inhibitor at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior of Tridax procumbens L. is greater in sulphuric acid than hydrochloric acid medium. So Tridax procumbens L. can be used as a good inhibitor for preventing mild steel material.

  18. Influence of Formazan Derivatives on Corrosion Inhibition of Mild Steel in Hydrochloric Acid Medium

    Directory of Open Access Journals (Sweden)

    P. Venkatesan

    2009-01-01

    Full Text Available Formazan of benzaldehyde (FB and formazan of p-dimethyl amino benzaldehyde (FD were synthesized. These compounds were studied as corrosion inhibitor for mild steel in 1.11 N hydrochloric acid by weight loss method. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with the temperature and acid concentration. Also, it was found that the corrosion inhibition behaviour of FD is greater than that of FB. The kinetic treatment of the results gave first order kinetics. The relative corrosion inhibition efficiency of these compounds has been explained on the basis of structure dependent - electron donor properties of the inhibitors.

  19. Synergy effect of naphthenic acid corrosion and sulfur corrosion in crude oil distillation unit

    Science.gov (United States)

    Huang, B. S.; Yin, W. F.; Sang, D. H.; Jiang, Z. Y.

    2012-10-01

    The synergy effect of naphthenic acid corrosion and sulfur corrosion at high temperature in crude oil distillation unit was studied using Q235 carbon-manganese steel and 316 stainless steel. The corrosion of Q235 and 316 in corrosion media containing sulfur and/or naphthenic acid at 280 °C was investigated by weight loss, scanning electron microscope (SEM), EDS and X-ray diffractometer (XRD) analysis. The results showed that in corrosion media containing only sulfur, the corrosion rate of Q235 and 316 first increased and then decreased with the increase of sulfur content. In corrosion media containing naphthenic acid and sulfur, with the variations of acid value or sulfur content, the synergy effect of naphthenic acid corrosion and sulfur corrosion has a great influence on the corrosion rate of Q235 and 316. It was indicated that the sulfur accelerated naphthenic acid corrosion below a certain sulfur content but prevented naphthenic acid corrosion above that. The corrosion products on two steels after exposure to corrosion media were investigated. The stable Cr5S8 phases detected in the corrosion products film of 316 were considered as the reason why 316 has greater corrosion resistance to that of Q235.

  20. Corrosion Behaviour of Nickel in Chloroacetic Acids and its Inhibition

    Institute of Scientific and Technical Information of China (English)

    S.M. Rashwan; A.Emam; S.M. Abd El-Wahab; M.M. Mohamed

    2004-01-01

    Anodic dissolution behaviour of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at different potentials. Effects of acid concentration, pH, scan rate and additive inhibitor on the potential were studied and they revealed that there is a considerable shift of potential.Potentiodynamic polarization measurements show that the corrosion rate of Ni in chloroacetic acid solutions increases by increasing the previous factors. However, by adding inhibitor, it decreases.

  1. Corrosion Inhibition and Adsorption Properties of Ethanolic Extract of Calotropis for Corrosion of Aluminium in Acidic Media

    OpenAIRE

    Sudesh Kumar; Suraj Prakash Mathur

    2013-01-01

    The corrosion inhibition of aluminium in sulfuric acid solution in the presence of different plant parts, namely, leaves, latex, and fruit was studied using weight loss method and thermometric method. The ethanolic extracts of Calotropis procera and Calotropis gigantea act as an inhibitor in the acid environment. The inhibition efficiency increases with increase in inhibitor concentration. The plant parts inhibit aluminium, and inhibition is attributed, due to the adsorption of the plant part...

  2. Influence of Formazan Derivatives on Corrosion Inhibition of Mild Steel in Hydrochloric Acid Medium

    OpenAIRE

    Venkatesan, P.; Anand, B.; P. Matheswaran

    2009-01-01

    Formazan of benzaldehyde (FB) and formazan of p-dimethyl amino benzaldehyde (FD) were synthesized. These compounds were studied as corrosion inhibitor for mild steel in 1.11 N hydrochloric acid by weight loss method. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with the temperature and acid concentration. Also, it was found that the corrosion inhibition behaviour of FD is greater than that of FB. The kinetic treatment of the results gave firs...

  3. Green Approach to Corrosion Inhibition of Mild Steel by Lignin Sulfonate in Acidic Media

    Institute of Scientific and Technical Information of China (English)

    Muna A.ABU-DALO; Nathir A.F.AL-RAWASHDEH; Ahmed A.MUTLAQ

    2016-01-01

    The inhibition effect of lignin sulfonate against corrosion for mild steel in acidic solution has been examined by means of FTIR (fourier transform infrared spectroscopy),FAA (flame atomic absorption)spectroscopy,SEM (scanning electron microscope),EDS (energy dispersive X-ray spectroscopy),and mass loss techniques.The results revealed that lignin is a beneficial inhibitor for mild steel corrosion in acidic medium.It has been further found that Langmuir adsorption isotherm is obeyed by the tested lignin′s adsorption over the surface of mild steel.The range of inhibition efficiency (IE)in 2 mol·L-1 HCl was found to be 75·88%-87·88% for Reax 88A,40·72%-60·32%for Reax 88B,and 54·32%-63·03% for Reax 100M,after immersed at 298 K for 24 h time.

  4. Organic compounds as corrosion inhibitors for mild steel in acidic media: correlation between inhibition efficiency and chemical structure

    Energy Technology Data Exchange (ETDEWEB)

    Elias, Elizandra C.S.; Chrisman, Erika C.A.N. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Escola de Quimica

    2009-12-19

    The use of inhibitors for mild steels corrosion control which are in contact with aggressive environment is an accepted practice in acid treatment of oil-wells. Organic compounds have been studied to evaluate their corrosion inhibition potential. Film-forming corrosion inhibitors, commonly used to protect oil-field equipment, can be absorbed on the steel surface to give structurally ordered layers. Therefore, the electrons should act as an important role for this adsorption. Studies reveal that organic compounds show significant inhibition efficiency. For this purpose, their molecules should contain N, O and S heteroatoms in various functional groups, long hydrocarbon linear or branched radical and anion and cation active components. However, most of these compounds are not only expensive but also toxic to living beings. According to the 'Green Chemistry' rules, corrosion inhibitors based on organic compounds should be cheap, with low toxicity and have high inhibition efficiency. In this study, the effects of some organic compounds with different groups such as amide, ether, phenyldiamine, anime and aminophenol on the corrosion behavior of mild steel in acidic media have been investigated. The experimental data were obtained by gravimetric measurements. The results show that these compounds reveal a promising corrosion inhibition where phenyldiamine is the most efficient. The effect of molecular structure on the corrosion inhibition efficiency was investigated by semi-empirical quantum chemical calculations. The electronic properties such as highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) energy levels, and LUMO-HOMO energy gap orbital density were calculated. The relations between the inhibition efficiency and some quantum parameters are discussed and correlations are proposed. The highest values for the HOMO densities were found in the vicinity nitrogen atom, indicating that it is the most probable adsorption center

  5. Synthesis and characterization of novel coatings for corrosion protection and hydrogen embrittlement inhibition

    Science.gov (United States)

    Durairajan, Anand

    The degradation of metallic materials under the effect of corrosion is a costly problem, which nearly every industry is confronted with. By using electrochemical plating, one can alter the characteristics of a surface so as to provide improved appearance, ability to withstand corrosive agents, resistance to abrasion, improved electrocatalytic properties or other desired properties or a combination of them. The primary goal of this dissertation is to use electrochemical deposition (electrolytic and electroless) as a surface modification technique to obtain corrosion resistant high performance electrode materials for different electrochemical applications. Metal hydride alloys, which reversibly absorb/desorb hydrogen, have been used in battery applications. The continuous decrease in the absorb/desorbing capacity of these alloys has been attributed to the corrosion of the alloy. Cobalt encapsulation (electroless) has been used as a surface modification method to obtain high performance AB5 type metal hydride alloy. The coated material has a higher capacity and longer cycle life compared to the bare alloy. Pulverization and alloy oxidation---two prime reasons for capacity fading of MH alloys have been studied in greater detail using unique electrochemical and physical characterization methods. The harmful effects of hydrogen permeation (ingress) and related stress corrosion cracking (SCC) can limit the use of metals and alloys in aqueous environments. In the present work, a new Zn-Ni-Cd plating process which offers a unique way of controlling and optimizing the Zn and Cd contents in the final deposit, has been developed. The Zn Ni-Cd alloy coatings has a more anodic corrosion potential than that of Cd but higher than the corrosion potential of iron. The coatings have superior corrosion resistance (10 times higher) and barrier properties than the conventional Cd coatings. Zn-Ni-Cd coatings also inhibit the hydrogen entry into the underlying steel. The kinetic

  6. Effects of microbial redox cycling of iron on cast iron pipe corrosion in drinking water distribution systems.

    Science.gov (United States)

    Wang, Haibo; Hu, Chun; Zhang, Lili; Li, Xiaoxiao; Zhang, Yu; Yang, Min

    2014-11-15

    Bacterial characteristics in corrosion products and their effect on the formation of dense corrosion scales on cast iron coupons were studied in drinking water, with sterile water acting as a reference. The corrosion process and corrosion scales were characterized by electrochemical and physico-chemical measurements. The results indicated that the corrosion was more rapidly inhibited and iron release was lower due to formation of more dense protective corrosion scales in drinking water than in sterile water. The microbial community and denitrifying functional genes were analyzed by pyrosequencing and quantitative polymerase chain reactions (qPCR), respectively. Principal component analysis (PCA) showed that the bacteria in corrosion products played an important role in the corrosion process in drinking water. Nitrate-reducing bacteria (NRB) Acidovorax and Hydrogenophaga enhanced iron corrosion before 6 days. After 20 days, the dominant bacteria became NRB Dechloromonas (40.08%) with the protective corrosion layer formation. The Dechloromonas exhibited the stronger corrosion inhibition by inducing the redox cycling of iron, to enhance the precipitation of iron oxides and formation of Fe3O4. Subsequently, other minor bacteria appeared in the corrosion scales, including iron-respiring bacteria and Rhizobium which captured iron by the produced siderophores, having a weaker corrosion-inhibition effect. Therefore, the microbially-driven redox cycling of iron with associated microbial capture of iron caused more compact corrosion scales formation and lower iron release.

  7. Inhibitive action of some plant extracts on the corrosion of steel in acidic media

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Gaber, A.M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)]. E-mail: ashrafmoustafa@yahoo.com; Abd-El-Nabey, B.A. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); Sidahmed, I.M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); El-Zayady, A.M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); Saadawy, M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)

    2006-09-15

    The effect of extracts of Chamomile (Chamaemelum mixtum L.), Halfabar (Cymbopogon proximus), Black cumin (Nigella sativa L.), and Kidney bean (Phaseolus vulgaris L.) plants on the corrosion of steel in aqueous 1 M sulphuric acid were investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. EIS measurements showed that the dissolution process of steel occurs under activation control. Potentiodynamic polarization curves indicated that the plant extracts behave as mixed-type inhibitors. The corrosion rates of steel and the inhibition efficiencies of the extracts were calculated. The results obtained show that the extract solution of the plant could serve as an effective inhibitor for the corrosion of steel in sulphuric acid media. Inhibition was found to increase with increasing concentration of the plant extract up to a critical concentration. The inhibitive actions of plant extracts are discussed on the basis of adsorption of stable complex at the steel surface. Theoretical fitting of different isotherms, Langmuir, Flory-Huggins, and the kinetic-thermodynamic model, were tested to clarify the nature of adsorption.

  8. Corrosion Inhibition of Carbon Steel in HCl Solution by Some Plant Extracts

    Directory of Open Access Journals (Sweden)

    Ambrish Singh

    2012-01-01

    Full Text Available The strict environmental legislations and increasing ecological awareness among scientists have led to the development of “green” alternatives to mitigate corrosion. In the present work, literature on green corrosion inhibitors has been reviewed, and the salient features of our work on green corrosion inhibitors have been highlighted. Among the studied leaves, extract Andrographis paniculata showed better inhibition performance (98% than the other leaves extract. Strychnos nuxvomica showed better inhibition (98% than the other seed extracts. Moringa oleifera is reflected as a good corrosion inhibitor of mild steel in 1 M HCl with 98% inhibition efficiency among the studied fruits extract. Bacopa monnieri showed its maximum inhibition performance to be 95% at 600 ppm among the investigated stem extracts. All the reported plant extracts were found to inhibit the corrosion of mild steel in acid media.

  9. Inhibition of carbon steel corrosion by 11-aminoundecanoic acid

    Directory of Open Access Journals (Sweden)

    Saad Ghareba

    2015-12-01

    Full Text Available The current study reports results on the investigation of the possibility of using 11-aminoundecanoic acid (AA as an inhibitor of general corrosion of carbon steel (CS in HCl under a range of experimental conditions: inhibitor concentration, exposure time, electrolyte temperature and pH and CS surface roughness. It was found that AA acts as a mixed-type inhibitor, yielding maximum inhibition efficiency of 97 %. The adsorption of AA onto the CS surface was described by the Langmuir adsorption isotherm. The corresponding apparent Gibbs free energy of AA adsorption on CS at 295 K was calculated to be −30.2 kJ mol–1. The adsorption process was found to be driven by a positive change in entropy of the system. PM-IRRAS measurements revealed that the adsorbed AA layer is amorphous, which can be attributed to the repulsion between the neighboring positively charged amine groups and a high heterogeneity of the CS surface. It was also found that the AA provides very good corrosion protection of CS of various surface roughness, and over a prolonged time.

  10. Inhibition of mild steel corrosion using Jatropha Curcas leaf extract

    Directory of Open Access Journals (Sweden)

    OLORUNFEMI MICHAEL AJAYI

    2014-05-01

    Full Text Available Jatropha Curcas leaf was investigated as a green inhibitor on the degradation of mild steel in 4 M HCl and 4 M H2SO4 aqueous solutions using gasometric technique. Mild steel coupons of dimension 2 × 1.5 cm were immersed in test solutions of uninhibited acid and also those with extract concentrations of 4 ml, 6 ml, 8 ml and 10 ml at 30 oC, for up to 30 minutes. The results showed that as the concentration of the extract increases, there was reduction in the corrosion rate. As the extract concentration increased from 4 ml to 10 ml at 30 minutes exposure, the volume of hydrogen gas evolved decreased from 19.1 cm3 to 11.2 cm3 in H2SO4 medium, while it reduced to 5 cm3 from 9 cm3 in HCl medium. Also, the metal surface-phytoconstituent interaction mechanism showed that 6 minutes is the best exposure time for the adsorption of the extract in both acidic media. The Jatropha Curcas leaf extract was adsorbed on the mild steel surface to inhibit corrosion, while the experimental data obtained at 30 minutes exposure in both acidic media were well fitted with the Langmuir adsorption isotherm. Hence, Jatropha Curcas leaf extract is a good and safe inhibitor in both acidic solutions.

  11. Understanding corrosion inhibition with van der Waals DFT methods: the case of benzotriazole.

    Science.gov (United States)

    Gattinoni, Chiara; Michaelides, Angelos

    2015-01-01

    The corrosion of materials is an undesirable and costly process affecting many areas of technology and everyday life. As such, considerable effort has gone into understanding and preventing it. Organic molecule based coatings can in certain circumstances act as effective corrosion inhibitors. Although they have been used to great effect for more than sixty years, how they function at the atomic-level is still a matter of debate. In this work, computer simulation approaches based on density functional theory are used to investigate benzotriazole (BTAH), one of the most widely used and studied corrosion inhibitors for copper. In particular, the structures formed by protonated and deprotonated BTAH molecules on Cu(111) have been determined and linked to their inhibiting properties. It is found that hydrogen bonding, van der Waals interactions and steric repulsions all contribute in shaping how BTAH molecules adsorb, with flat-lying structures preferred at low coverage and upright configurations preferred at high coverage. The interaction of the dehydrogenated benzotriazole molecule (BTA) with the copper surface is instead dominated by strong chemisorption via the azole moiety with the aid of copper adatoms. Structures of dimers or chains are found to be the most stable structures at all coverages, in good agreement with scanning tunnelling microscopy results. Benzotriazole thus shows a complex phase behaviour in which van der Waals forces play an important role and which depends on coverage and on its protonation state and all of these factors feasibly contribute to its effectiveness as a corrosion inhibitor.

  12. Mentha pulegium extract as a natural product for the inhibition of corrosion. Part I: electrochemical studies.

    Science.gov (United States)

    Khadraoui, Abdelkader; Khelifa, Abdellah; Boutoumi, Hocine; Hammouti, Belkheir

    2014-01-01

    The inhibitory effect of Mentha pulegium extract (MPE) on steel corrosion in 1 M HCl solution was investigated using potentiodynamic polarisation and electrochemical impedance spectroscopy. The inhibition efficiency of MPE was found to increase with the concentration and reached 88% at 33% (v/v). Polarisation measurements show that the natural extract acted as a mixed inhibitor. The remarkable inhibition efficiency of MPE was discussed in terms of blocking of electrode surface by adsorption of inhibitor molecules through active centres. The adsorption of MPE was found to accord with the Temkin isotherm.

  13. Inhibition of Corrosion of Carbon Steel in Well Water by DL-Phenylalanine-Zn2+ System

    Directory of Open Access Journals (Sweden)

    A. Sahaya Raja

    2013-01-01

    Full Text Available The environmental friendly inhibitor system DL-phenylalanine-Zn2+ has been investigated by weight loss method. A synergistic effect exists between DL-phenylalanine and Zn2+ system. The formulation consisting of 150 ppm of DL-phenylalanine and 5 ppm of Zn2+ offers good inhibition efficiency of 90%. Polarization study reveals that this formulation functions as a anodic inhibitor. AC impedance spectra reveal that a protective film is formed on the metal surface. The surface morphology has been analysed by SEM and EDAX. A suitable mechanism of corrosion inhibition is proposed based on the results obtained from weight loss study and electrochemical studies.

  14. A theoretical study on the inhibition efficiencies of some amino acids as corrosion inhibitors of nickel

    Energy Technology Data Exchange (ETDEWEB)

    Gece, Goekhan, E-mail: gokhangc@gmail.co [Department of Physical Chemistry, Faculty of Science, Ankara University, Besevler, 06100 Ankara (Turkey); Bilgic, Semra [Department of Physical Chemistry, Faculty of Science, Ankara University, Besevler, 06100 Ankara (Turkey)

    2010-10-15

    To clarify the inhibition efficiencies of a total of 12 amino acids for the corrosion of nickel in acidic medium, a density functional theory (DFT) study was carried out using the B3LYP/LANL2DZ method. Quantum chemical descriptors such as the energy of highest occupied molecular orbital (E{sub HOMO}), energy of lowest unoccupied molecular orbital (E{sub LUMO}), and the energy gap ({Delta}E) were calculated. Equations were proposed using linear regression analysis to determine the most effective parameter on inhibition efficiency. The theoretically obtained results were found to be consistent with the experimental data reported.

  15. A Comparative Study on Corrosion Inhibition of Mild Steel Using Piper Nigrum L. in Different Acid Medium

    OpenAIRE

    Anand, B.; Balasubramanian, V

    2010-01-01

    The inhibition of corrosion of mild steel using Piper nigrum L in different acid medium by weight loss method was investigated. The corrosion inhibition was studied in hydrochloric acid and sulphuric acid by weight loss method at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of this compound was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior of Pipe...

  16. Corrosion Inhibition Effect of Aliphatic Amines on Aluminum in HCl Solution%盐酸介质中脂肪胺类化合物对铝材的缓蚀作用

    Institute of Scientific and Technical Information of China (English)

    帅长庚; 邓淑珍; 宋玉苏; 银继伟

    2001-01-01

    用失重法和电化学方法研究了正丁胺、二乙胺、乌洛托品在1.0 mol/L HCl中对铝的缓蚀作用,并对其机理进行了探讨。研究结果表明:起初,3种化合物对铝均具有缓蚀作用,缓蚀效果:乌洛托品>二乙胺>正丁胺,随着时间的延长,缓蚀效率逐渐降低;3种化合物均为吸附型缓蚀剂,对铝腐蚀的阴极过程和阳极过程都有一定的抑制作用,其吸附符合兰格缪尔等温吸附方程。%The corrosion inhibition effect of aliphatic amines on industrial pure aluminum in 1.0 mol/L HCl solution was investigated by weightloss and electrochemical methods. The inhibition efficiency was found to decrease in following order hexamethylenetetramine >diethylamine>nbutylamine. The thermodynamic functions of adsorption ΔG0am and corrosion potential Ek were evaluated. The authors pointed out that the adsorption of amines followed Langmuir isothermal equation.

  17. Corrosion Inhibition of Cast Iron in Arabian Gulf Seawater by Two Different Ionic Liquids

    Directory of Open Access Journals (Sweden)

    El-Sayed M. Sherif

    2015-06-01

    Full Text Available In this paper we report on the corrosion inhibition of cast iron in Arabian Gulf seawater by two different ionic liquids namely, 1-ethyl-3-methylimidazolium chloride ([EMIm]Cl and 1-butyl-1-methylpyrrolidinium chloride ([Py1,4]Cl. The inhibiting influence of the employed ionic liquids was investigated by weight loss, open circuit potential electrochemical impedance spectroscopy, and cyclic potentiodynamic polarization. The results show the corrosion inhibition impact of the employed ionic liquids (ILs. Compared with [Py1,4]Cl, [EMIm]Cl shows a higher inhibition efficiency at a short immersion time, for the examined ILs concentrations. However, [Py1,4]Cl exhibits a higher efficiency upon increasing the immersion time indicating the persistence of the inhibiting influence. The corrosion inhibition of the employed ionic liquids is attributed to the adsorption of the cations of the ionic liquids onto the surface of cast iron forming a corrosion barrier.

  18. THEORETICAL STUDY ON CORROSION INHIBITION PROPERTIES OF 2-ISOPROPYL-5-METHYLPHENOL

    Directory of Open Access Journals (Sweden)

    Saprizal Hadisaputra

    2016-08-01

    Full Text Available Corrosion inhibitors of 2-isopropyl-5-methylphenol and its derivatives has been elucidated by means of density functional theory at B3LYP/6-31G(d level of theory. Effect of electron donating and withdrawing groups such as NH2, SH, CHCH2, CH3, OH, CHO, COOH, F and NO2 on the corrosion inhibitor of 2-isopropyl-5-methylphenol derivatives also have been studied. The quantum chemical parameters such as the frontier orbital energies (EHOMO, ionization potential (I, electron affinity (A and electronegativity (χ are closely related to the corrosion inhibition efficiency (IE % of 2-isopropyl-5-methylphenol derivatives. The presence of electron donating groups increase IE % values meanwhile electron with drawing groups reduce IE % values. The enhancement of IE % follows NO2 < CHO < COOH < SH < F < CH3 < CHCH2 < OH < NH2. Electron donating NH2 group gives 96.38 % of IE %, pure 2-isopropyl-5-methylphenol IE % = 82.70 %. In contrast, electron withdrawing NO2 group gives IE % only 68.66 %. This theoretical study would have a significantly contribution for accelerating corrosion inhibitor experimental to gain optimum results.

  19. Corrosion inhibition of low phosphonic multipolymer water treatment agent of industry circulating on brass in aqueous solution

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    In response to environmental guidelines, a low phosphonic multipolymer was synthesized and its corrosion inhibition efficiency to brass in synthetic water was investigated through weight loss measurements and electrochemical tests.It showed that the synthesized inhibitor decreased corrosion under the conditions tested.Potentiodynamic polarization curves indicated that the new inhibitor acted as an anodic inhibitor, reducing metal dissolution.The composition of protective films formed on the brass was studied by energy-dispersive X-ray analysis (EDX).The inhibition effects were due to the formation of a protective film of the multipolymer inhibitor on the metal surface.

  20. Corrosion effects on friction factors

    Energy Technology Data Exchange (ETDEWEB)

    Magleby, H.L.; Shaffer, S.J.

    1996-03-01

    This paper presents the results of NRC-sponsored material specimen tests that were performed to determine if corrosion increases the friction factors of sliding surfaces of motor-operated gate valves, which could require higher forces to close and open safety-related valves when subjected to their design basis differential pressures. Friction tests were performed with uncorroded specimens and specimens subjected to accelerated corrosion. Preliminary tests at ambient conditions showed that corrosion increased the friction factors, indicating the need for additional tests duplicating valve operating parameters at hot conditions. The additional tests showed friction factors of corroded specimens were 0.1 to 0.2 higher than for uncorroded specimens, and that the friction factors of the corroded specimens were not very dependent on contact stress or corrosion film thickness. The measured values of friction factors for the three corrosion films tested (simulating three operating times) were in the range of 0.3 to 0.4. The friction factor for even the shortest simulated operating time was essentially the same as the others, indicating that the friction factors appear to reach a plateau and that the plateau is reached quickly.

  1. Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Behpour, M. [Department of Chemistry, Faculty of Science, University of Kashan, Kashan (Iran, Islamic Republic of)], E-mail: m.behpour@kashanu.ac.ir; Ghoreishi, S.M.; Soltani, N.; Salavati-Niasari, M.; Hamadanian, M.; Gandomi, A. [Department of Chemistry, Faculty of Science, University of Kashan, Kashan (Iran, Islamic Republic of)

    2008-08-15

    Inhibitory effect of three Schiff bases 2-{l_brace}[(2-sulfanylphenyl)imino]methyl{r_brace}]phenol (A), 2-{l_brace}[(2)-1-(4-methylphenyl)methylidene]amino{r_brace}-1-benznethiol (B), and 2-[(2-sulfanylphen-yl)ethanimidoyl)]phenol (C) on corrosion of mild steel in 15% HCl solution has been studied using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. The results of the investigation show that the compounds A and B with mean efficiency of 99% at 200 mg/L additive concentration have fairly good inhibiting properties for mild steel corrosion in hydrochloric acid, and they are as mixed inhibitor. All measurements show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that inhibitive actions of inhibitors were mainly due to adsorption on mild steel surface. Adsorption of these inhibitors follows the Langmuir adsorption isotherm. Thermodynamic adsorption parameters (K{sub ads}, {delta}G{sub ads}) of studied Schiff bases were calculated using the Langmuir adsorption isotherm. Activation parameters of the corrosion process such as activation energies, E{sub a}, activation enthalpies, {delta}H{sup *}, and activation entropies, {delta}S{sup *}, were calculated by the obtained corrosion currents at different temperatures. Obvious correlation was found between the corrosion inhibition efficiency and the calculated parameters. The obtained theoretical results have been adapted with the experimental data.

  2. The role of acid anion on the inhibition of the acidic corrosion of steel by lupine extract

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Gaber, A.M. [Chemistry Department, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)], E-mail: ashrafmoustafa@yahoo.com; Abd-El-Nabey, B.A.; Saadawy, M. [Chemistry Department, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)

    2009-05-15

    The inhibitive effect of lupine (Lupinous albus L.) extract on the corrosion of steel in aqueous solution of 1 M sulphuric and 2 M hydrochloric acids was investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization curves indicated that the lupine extract acts as a mixed-type inhibitor. EIS measurements showed that the dissolution process is under activation control. The inhibition efficiency of the extract obtained from impedance and polarization measurements was in a good agreement and was found to increase with increasing concentration of the extract. The obtained results showed that, the lupine extract could serve as an effective inhibitor for the corrosion of steel in acid media and the extract was more effective in case of hydrochloric acid. Theoretical fitting of the corrosion data to the kinetic-thermodynamic model was tested to show the nature of adsorption.

  3. Quantum chemical study of the inhibition of the corrosion of mild steel in H2SO4 by some antibiotics.

    Science.gov (United States)

    Eddy, Nnabuk O; Ibok, Udo J; Ebenso, Eno E; El Nemr, Ahmed; El Ashry, El Sayed H

    2009-09-01

    The inhibition efficiency of some antibiotics against mild steel corrosion was studied using weight loss and quantum chemical techniques. Values of inhibition efficiency obtained from weight loss measurements correlated strongly with theoretical values obtained through semi empirical calculations. High correlation coefficients were also obtained between inhibition efficiency of the antibiotics and some quantum chemical parameters, including frontier orbital (E (HOMO) and E (LUMO)), dipole moment, log P, TNC and LSER parameters (critical volume and dipolar-polarisability factor), which indicated that these parameters affect the inhibition efficiency of the compounds. It was also found that quantitative structure activity relation can be used to adequately predict the inhibition effectiveness of these compounds.

  4. Fabrication of Slippery Lubricant-Infused Porous Surface for Inhibition of Microbially Influenced Corrosion.

    Science.gov (United States)

    Wang, Peng; Zhang, Dun; Lu, Zhou; Sun, Shimei

    2016-01-20

    Microbially influenced corrosion (MIC) accelerates the failure of metal in a marine environment. In this research, slippery lubricant-infused porous surface (SLIPS) was designed on aluminum, and its great potential for inhibiting MIC induced by sulfate-reducing bacteria (SRB) was demonstrated in a simulated marine environment. The inhibition mechanism of SLIPS to MIC was proposed based on its effective roles in the suppression of SRB settlement and isolation effect to corrosive metabolites. The liquid-like property is demonstrated to be the major contributor to the suppression effect of SLIPS to SRB settlement. The effects of environmental factors (static and dynamic conditions) and lubricant type to SRB settlement over SLIPS were also investigated. It was indicated that the as-fabricated SLIPS can inhibit the SRB settlement in both static and dynamic marine conditions, and lubricant type presents a negligible effect on the SRB settlement. These results will provide a series of foundational data for the future practical application of SLIPS in the marine environment, and also a lubricant selecting instruction to construct SLIPS for MIC control.

  5. Inhibition of Mild Steel Corrosion in Sulfuric Acid Solution by New Schiff Base

    Directory of Open Access Journals (Sweden)

    Ahmed A. Al-Amiery

    2014-01-01

    Full Text Available The efficiency of Schiff base derived from 4-aminoantipyrine, namely 2-(1,5-dimethyl-4-(2-methylbenzylideneamino-2-phenyl-1H-pyrazol-3(2H-ylidene hydrazinecarbothioamide as a corrosion inhibitor on mild steel in 1.0 M H2SO4 was investigated using electrochemical impedance spectroscopy (EIS, potentiodynamic polarization (PD and electrochemical frequently modulation (EFM in addition to the adsorption isotherm, corrosion kinetic parameters and scanning electron microscopy (SEM. The results showed that this inhibitor behaved as a good corrosion inhibitor, even at low concentration, with a mean efficiency of 93% and, also, a reduction of the inhibition efficiency as the solution temperature increases. A polarization technique and EIS were tested for different concentrations and different temperatures to reveal that this compound is adsorbed on the mild steel, therefore blocking the active sites, and the adsorption follows the Langmuir adsorption isotherm model. The excellent inhibition effectiveness of 2-(1,5-dimethyl-4-(2-methylbenzylideneamino-2-phenyl-1H-pyrazol-3(2H-ylidenehydrazinecarbothioamide was also verified by scanning electron microscope (SEM.

  6. Investigating inhibition of microbes inducing microbiologically-influenced-corrosion by Tectona grandis based Fe-nanoparticle material

    Science.gov (United States)

    Okeniyi, Joshua Olusegun; Omotosho, Olugbenga Adeshola; Inyang, Michael Anietie; Okeniyi, Elizabeth Toyin; Nwaokorie, Ikechi Thaddeus; Adidi, Emmanuel Amanogho; Owoeye, Taiwo Felicia; Nwakudu, Kelechukwu Chinedu; Akinlabu, Deborah Kehinde; Gabriel, Olanrewaju Oyewale; Taiwo, Olugbenga Samson; Awotoye, Olufisayo Adebola

    2017-02-01

    In this paper, inhibition of microbes inducing microbiologically-influenced-corrosion (MIC) of metals by Tectona grandis based Fe (iron) Nanoparticle material was investigated. For this, extract was obtained from the leaf of Tectona grandis and this was employed as precursor for synthesizing the Fe-nanoparticle material. From this, the synthesized plant extract based nanoparticle material was characterized using scanning electron microscopy and energy dispersive spectroscopy (SEM+EDS) instrument. The developed Fe bio-nanoparticle material was then employed for sensitivity and/or resistance study application against different strains of microbes that are known to induce microbiologically-influenced-corrosion, in metallic materials, and for this, microbial growth inhibition effect was compared with that from a commercial antibiotic employed as control. Results showed that the Tectona grandis based Fe-nanoparticle exhibited good inhibition effects on the growth of many of the MIC inducing microbes investigated. Sensitivity measures of zone of inhibition against the growth of MIC inducing microbial strains either outperformed or compares well with that obtained from the commercial antibiotic control, in the study. These results indicate positive prospect on the suitability of Fe bio-nanoparticle for corrosion inhibition applications for the protection of metals against microbiological corrosion influencing environment.

  7. Electrochemical and spectroscopic evidences of corrosion inhibition of bronze by a triazole derivative

    Energy Technology Data Exchange (ETDEWEB)

    Dermaj, A. [Laboratoire Interfaces et Systemes Electrochimiques, UPR 15 du CNRS, Paris (France); Laboratoire Electrochimie, Corrosion et Environnement, Faculte des Sciences, Kenitra (Morocco); Hajjaji, N. [Laboratoire Electrochimie, Corrosion et Environnement, Faculte des Sciences, Kenitra (Morocco); Joiret, S. [Laboratoire Interfaces et Systemes Electrochimiques, UPR 15 du CNRS, Paris (France); Rahmouni, K. [Laboratoire Interfaces et Systemes Electrochimiques, UPR 15 du CNRS, Paris (France); Laboratoire Electrochimie, Corrosion et Environnement, Faculte des Sciences, Kenitra (Morocco); Srhiri, A. [Laboratoire Electrochimie, Corrosion et Environnement, Faculte des Sciences, Kenitra (Morocco); Takenouti, H. [Laboratoire Interfaces et Systemes Electrochimiques, UPR 15 du CNRS, Paris (France); Vivier, V. [Laboratoire Interfaces et Systemes Electrochimiques, UPR 15 du CNRS, Paris (France)]. E-mail: vivivier@ccr.jussieu.fr

    2007-04-01

    The electrochemical behavior of the bronze (Cu-8Sn in wt%) was investigated in 3% NaCl aqueous solution, in presence and in absence of a corrosion inhibitor, the 3-phenyl-1,2,4-triazole-5-thione (PTS). The inhibiting effect of the PTS was evidenced for concentrations higher than 1 mM for the cathodic process whereas its effect was clearly seen with a concentration as low as 0.1 mM for the anodic process. A significant positive shift of the corrosion potential was also observed, and its inhibiting effect increased with both its concentration and the immersion time of the sample. From voltammetry and electrochemical impedance spectroscopy experiments, the inhibiting efficiency of the PTS was found to be in the 94-99% range for 1 mM concentration. Scanning electron microscopy and X-ray energy dispersion analysis of the specimen surface show the presence of sulphur on the surface. Raman micro-spectrometry study confirms the protective effect of the PTS in aqueous solution through three types of interactions with the electrode, namely the adsorption of the inhibitor in a flat configuration, the formation of copper-thiol molecules, and when copper is released, the formation of a polymeric complex.

  8. [Influence of EPS on silicate corrosion inhibition for copper pipe in soft water].

    Science.gov (United States)

    Li, Shi-Yin

    2008-10-01

    The effects of sodium alginate on silicate corrosion inhibition for copper pipe in simulated soft water were investigated. The results showed that more soluble copper release was occurred when low concentration sodium alginate was in presence. The 1 a aged copper pipe released more soluble copper than the 3 a and 10 a aged copper pipe. The sequence of concentration of soluble copper release was c 1 a > c 3 a, > c 10 a. However, compared to the low concentration sodium alginate, soluble copper released from the 1 a aged copper pipe increased, and the 3 a and 10 a aged copper pipe were inverse when high level sodium alginate was in presence. These phenomena showed that the effect of silicate corrosion inhibition decreased when extracellular polymer substances was dissolved in soft water. Under the conditions of pH 7.5 and sodium alginate 16 mg/L, soluble copper release tend was gradually increase-decrease-gradually run-up which due to the absorption of sodium alginate on the surface of copper surface and the complex interaction between sodium alginate, silicate and copper ions. When the initial pH value was low, compared to the system of no sodium alginate, the soluble copper release distinctly increased in the presence of sodium alginate. The amount of soluble copper released from 1 a copper pipe is higher than that from 3 a and 10 a aged copper pipe, which due to the different components of copper corrosion by-products on the surface of different aged copper pipes and the different solubility of different corrosion by-products.

  9. Lipopolysaccharide inhibits or accelerates biomedical titanium corrosion depending on environmental acidity.

    Science.gov (United States)

    Yu, Fei; Addison, Owen; Baker, Stephen J; Davenport, Alison J

    2015-09-14

    Titanium and its alloys are routinely used as biomedical implants and are usually considered to be corrosion resistant under physiological conditions. However, during inflammation, chemical modifications of the peri-implant environment including acidification occur. In addition certain biomolecules including lipopolysaccharide (LPS), a component of Gram-negative bacterial cell walls and driver of inflammation have been shown to interact strongly with Ti and modify its corrosion resistance. Gram-negative microbes are abundant in biofilms which form on dental implants. The objective was to investigate the influence of LPS on the corrosion properties of relevant biomedical Ti substrates as a function of environmental acidity. Inductively coupled plasma mass spectrometry was used to quantify Ti dissolution following immersion testing in physiological saline for three common biomedical grades of Ti (ASTM Grade 2, Grade 4 and Grade 5). Complementary electrochemical tests including anodic and cathodic polarisation experiments and potentiostatic measurements were also conducted. All three Ti alloys were observed to behave similarly and ion release was sensitive to pH of the immersion solution. However, LPS significantly inhibited Ti release under the most acidic conditions (pH 2), which may develop in localized corrosion sites, but promoted dissolution at pH 4-7, which would be more commonly encountered physiologically. The observed pattern of sensitivity to environmental acidity of the effect of LPS on Ti corrosion has not previously been reported. LPS is found extensively on the surfaces of skin and mucosal penetrating Ti implants and the findings are therefore relevant when considering the chemical stability of Ti implant surfaces in vivo.

  10. Lipopolysaccharide inhibits or accelerates biomedical titanium corrosion depending on environmental acidity

    Institute of Scientific and Technical Information of China (English)

    Fei Yu; Owen Addison; Stephen J Baker; Alison J Davenport

    2015-01-01

    Titanium and its alloys are routinely used as biomedical implants and are usually considered to be corrosion resistant under physiological conditions. However, during inflammation, chemical modifications of the peri-implant environment including acidification occur. In addition certain biomolecules including lipopolysaccharide (LPS), a component of Gram-negative bacterial cell walls and driver of inflammation have been shown to interact strongly with Ti and modify its corrosion resistance. Gram-negative microbes are abundant in biofilms which form on dental implants. The objective was to investigate the influence of LPS on the corrosion properties of relevant biomedical Ti substrates as a function of environmental acidity. Inductively coupled plasma mass spectrometry was used to quantify Ti dissolution following immersion testing in physiological saline for three common biomedical grades of Ti (ASTM Grade 2, Grade 4 and Grade 5). Complementary electrochemical tests including anodic and cathodic polarisation experiments and potentiostatic measurements were also conducted. All three Ti alloys were observed to behave similarly and ion release was sensitive to pH of the immersion solution. However, LPS significantly inhibited Ti release under the most acidic conditions (pH 2), which may develop in localized corrosion sites, but promoted dissolution at pH 4–7, which would be more commonly encountered physiologically. The observed pattern of sensitivity to environmental acidity of the effect of LPS on Ti corrosion has not previously been reported. LPS is found extensively on the surfaces of skin and mucosal penetrating Ti implants and the findings are therefore relevant when considering the chemical stability of Ti implant surfaces in vivo.

  11. Application of transient analysis using Hilbert spectra of electrochemical noise to the identification of corrosion inhibition

    NARCIS (Netherlands)

    Homborg, A.M.; Westing, E.P.M. van; Tinga, T.; Ferrari, G.M.; Zhang, X.; Wit, J.H.W. de; Mol, J.M.C.

    2014-01-01

    This study validates the ability of Hilbert spectra to investigate transients in an electrochemical noise signal for an aqueous corrosion inhibition process. The proposed analysis procedure involves the identification and analysis of transients in the electrochemical current noise signal. Their

  12. The Inhibitive Effect of para-Amino Benzoic Acid and Its Polymer on Corrosion of Iron in 1 mol/L HCl Solution

    Institute of Scientific and Technical Information of China (English)

    P. Manivel; G. Venkatachari

    2006-01-01

    Poly p-aminobenzoic acid has been synthesized by chemical oxidation method. The inhibitive effect of poly p-aminobenzoic acid on iron in 1 mol/l HCl solution was investigated by polarization and electrochemical impedance spectroscopy and compared with that of monomer p-aminobenzoic acid. The effectiveness of poly p-aminobenzoic acid is very high in comparison with that of monomer. The results show that both cathodic and anodic processes were suppressed by p-aminobenzoic acid and poly p-aminobenzoic acid of iron dissolution in 1 mol/L HCl by their adsorption on the iron surface. The inhibition efficiency of both p-aminobenzoic acid and poly p-aminobenzoic acid were found to increase with the inhibitor concentrations. Ultraviolet (UV)reflectance studies of the iron surface after exposure to inhibitor acid show that poly p-aminobenzoic acid is strongly adsorbed on iron surface.

  13. Corrosion inhibition of mild steel by amphoteric surfactants derived from aspartic acid

    Energy Technology Data Exchange (ETDEWEB)

    Morsi, M.S. (Cairo Univ., Faculty of Science, Chemistry Dept., Giza (Egypt)); Barakat, Y.F. (Cairo Univ., Faculty of Science, Chemistry Dept., Giza (Egypt)); El-Sheikh, R. (Cairo Univ., Faculty of Science, Chemistry Dept., Giza (Egypt)); Hassan, A.M. (Cairo Univ., Faculty of Science, Chemistry Dept., Giza (Egypt)); Baraka, A. (Cairo Univ., Faculty of Science, Chemistry Dept., Giza (Egypt))

    1993-07-01

    The inhibition of mild steel corrosion in 0.5 M HCl solution by amphoteric surfactants (which contain both an anionic and a cationic moiety in the same molecule) of general formula: NH[sub 2]-(CH[sub 2])[sub 2]-NH-CH(COOH)-CH[sub 2]-CO-NHR (R alkyl group of C[sub 10,] [sub 11,] [sub 12,] [sub 13,] [sub 15,] [sub and] [sub 17]) is shown to confirm Langmuir's absorption isotherms. At a given concentration of surfactants, the inhibiting action increases with the increase of carbon chain length. The influence of both inductive and steric hindrance effects of methylene groups in -R on the inhibition efficiency has also been mentioned. (orig.)

  14. Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by Ciprofloxacin Drug

    OpenAIRE

    2013-01-01

    The inhibition of mild steel corrosion in hydrochloric acid solution by ciprofloxacin drug as an eco-friendly and commercially available inhibitor was studied at room temperature by weight loss technique. It was found that the test drug has a promising inhibitory action against corrosion of mild steel in the medium investigated. The inhibition efficiency was found to increase with a corresponding increase in the concentration of the inhibitor. It was also found that the adsorption as well as ...

  15. Three-Layer PE Corrosion-Inhibiting Coating for Steel Pipeline

    Institute of Scientific and Technical Information of China (English)

    Li Aiguo; Zheng Aijing

    1994-01-01

    @@ RIET (Research Institute of Engineering Technology of China National Petroleum Corporation)had got a lender contract for manufacturing corrosion-inhibiting coating for steel pipe piles through international competitive bidding in the extension section project of Dandong Port (China)in 1992. The contract had been completed by May 1993. Now, brief descriptions of the corrosion-inhibiting coating manufactured by RIETare presented as following.

  16. Method for inhibiting corrosion of nickel-containing alloys

    Science.gov (United States)

    DeVan, J.H.; Selle, J.E.

    Nickel-containing alloys are protected against corrosion by contacting the alloy with a molten alkali metal having dissolved therein aluminum, silicon or manganese to cause the formation of a corrosion-resistant intermetallic layer. Components can be protected by applying the coating after an apparatus is assembled.

  17. Mechanism of acid corrosion inhibition using magnetic nanofluid

    Science.gov (United States)

    Parekh, Kinnari; Jauhari, Smita; Upadhyay, R. V.

    2016-12-01

    The inhibition effect of magnetic nanofluid on carbon steel in acid solutions was investigated using gravimetric, potentiodynamic and SEM measurement. The inhibition efficiency increases up to 95% and 75% for 51.7 mM concentration, respectively, in 1 M HCl and 1 M H2SO4 medium. The adsorption of nanoparticles to the steel surface forms a barrier between the metal and the aggressive environment, which is responsible for observed inhibition action. The adsorption of nanoparticles on steel surface is supported by the Langmuir and Freundlich adsorption isotherm and surface morphology scanned through SEM.

  18. Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface

    Directory of Open Access Journals (Sweden)

    Kazem Sabet Bokati

    2017-06-01

    Full Text Available An ultrafine grain surface layer with average crystallite size of 28 nm was produced on annealed mild steel through a wire brushing process. The effects of grain size reduction on the inhibition performance of sodium phosphate were investigated using polarization and electrochemical impedance spectroscopy (EIS measurements. The crystal grain size of wire brushed surface was analyzed by X-ray diffractometry (XRD and field emission scanning electron microscopy (FESEM. The electrochemical tests were conducted in artificial sea water (ASW in the presence and absence of 250 mg/lit sodium phosphate (SP. The wire brushed surface indicated considerable deformed plastic flows and high surface roughness. Due to the accumulated strains, a deformed layer with thickness of 20±5 μm was produced and the crystal grain size of severe deformed zone was about 28 nm. Wire brushed surface increased uniform corrosion rate of mild steel due to enhanced surface roughness and preferential sites to adsorption of corrosive ions. However, the wire brushed surface showed a positive effect on inhibition performance of sodium phosphate. The electrochemical results revealed that average inhibition efficiency increased from 65 to about 80 percent in ASW solution containing 1.5 mM Na3PO4 for coarse grained samples in comparison to that of ultra-fined grain samples respectively .The wire brushing process encouraged passivity on the surface in SP-containing solution due to a high density of nucleation sites which increased the adsorption of phosphate ions leading to a high fraction of passive layers and low corrosion rates.

  19. Corrosion control in mining technology

    Energy Technology Data Exchange (ETDEWEB)

    Telekesi, J.

    1985-01-01

    An overview of corrosion effects in mining technology and the importance of protection is presented. The most common corrosion processes and effects are summarized and the system and criteria of their avoidance are discussed in detail. Preventive measures are recommended to decrease possible corrosion effects including the selection of corrosion-resistive constructions, to use protective coatings and inhibition techniques and some other protection possibilities where applicable. The organization aspects and the economic impact of corrosion control in mining are discussed.

  20. Synthesis, characterization and corrosion inhibition efficiency of N-(4-(Morpholinomethyl Carbamoyl Phenyl Furan-2-Carboxamide

    Directory of Open Access Journals (Sweden)

    N. Zulfareen

    2016-01-01

    Full Text Available A mannich base namely N-(4-(Morpholinomethyl Carbamoyl Phenyl Furan-2-Carboxamide (MFC was synthesized and characterized by FT-IR, 1H NMR, and 13C NMR. The molecular weight of MFC was confirmed by LC-MS. The inhibition effect of MFC on brass in 1 M HCl medium has been investigated by weight loss measurement, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS and cyclic voltametry (CV. Thermodynamic parameters such as free energy, entropy and enthalpy were calculated to describe the mechanism of corrosion inhibitor. The inhibition efficiency of MFC increases with increase in concentration and temperature ranges from 30 °C to 60 °C. Polarization measurements indicated that MFC acts as a mixed type corrosion inhibitor. AC impedance indicates that Rct value increases with increase in the concentration of inhibitor. CV reveals that the oxidation of the copper is controlled by the addition of inhibitor on the brass metal. Surface analysis using scanning electron microscope (SEM shows a significant morphological improvement on the brass surface with the addition of the inhibitor. The adsorption of MFC on brass obeys Langmuir adsorption isotherm. The molecular structure of MFC was distorted to quantum chemical indices using density functional theory (DFT which indicates that the inhibition efficiency of MFC is closely related to quantum parameters.

  1. Ph responsive capsules containing composite coatings for corrosion inhibition in metal alloys

    Science.gov (United States)

    Kashi, Kiran Bhat

    Hexavalent chromes have been used as effective corrosion inhibitors due to their high inhibitor efficiency and low cost for the protection of several metal alloys. However, owing to their toxicity federal legislations restrict the use and distribution of these highly toxic materials. The need for an environmentally friendly yet effective alternative to the chrome based corrosion inhibitors has led to the investigation of rare earth metals as potential candidates. Cerium is one such rare earth metal that has received considerable attention as an alternative to hexavalent chromes. However, the high water solubility of some of the cerium salts makes it difficult for the incorporation of such salts in coatings. In this work, pH responsive microcapsules containing cerium salts were synthesized using an internally phase separated emulsion polymerization technique. Core shell microcapsule consisting of a water core containing dissolved cerium salts were synthesized. The synthesized capsules were characterized using characterization techniques such as Fourier Transform Infrared (FTIR) spectroscopy, UV-vis spectroscopy, Dynamic Mechanical Analysis (DMA), Thermo-Gravimetric Analysis (TGA), and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The structure and morphology of the capsules were studied using electron microscopy techniques. The synthesized capsules were dispersed in 2K epoxy coatings and applied on aluminum alloy 2024 T-3 and cold rolled steel substrates. These coatings were exposed to salt spray (ASTM B117) and electrochemically evaluated using electrochemical impedance spectroscopy (EIS), potentio-dynamic(PD) polarization, cyclic voltammetry(CV), open circuit potential(OCP) measurements. Localized corrosion assessment was also performed on the coated metal alloys using Scanning electrochemical microscopy (SECM) to understand the mechanism of corrosion inhibition using cerium encapsulated microcapsules.

  2. Effects of alternating magnetic field on the corrosion rate and corrosion products of copper

    Institute of Scientific and Technical Information of China (English)

    GUO Bin; ZHANG Peng; JIN Yongping; CHENG Shukang

    2008-01-01

    The effects of alternating magnetic field on the corrosion morphologies, corrosion rate, and corrosion products of copper in 3.5% NaCl solution, sea water, and magnetized sea water were investigated using electrochemical test, scanning electron microscopy/energy dispersive analysis system of X-ray (SEM/EDAX), and X-ray diffraction (XRD). The results show that the corrosion rate of copper in magnetized sea water is minimal. Moreover, the surface of the specimen in magnetized sea water is uniform and compact as compared with those in 3.5% NaCl solution and sea water. The corrosion products of copper in magnetized sea water are mainly Cu2O and CuCl2. However, the corrosion products in sea water are CuCl, Cu2Cl(OH)3, and FeCl3·6H2O. The electrochemical corrosion mechanisms of copper in the three media were also discussed.

  3. New Mechanism on Synergistic Effect of Nitrite and Triethanolamine Addition on the Corrosion of Ductile Cast Iron

    Directory of Open Access Journals (Sweden)

    K. T. Kim

    2016-01-01

    Full Text Available In general, we compared the different inhibition mechanisms of organic inhibitor with that of anodic inhibitor. When triethanolamine or nitrite was added separately to tap water for inhibiting the corrosion of ductile cast iron, large amounts of inhibitor were needed. This is because the corrosion inhibitors had to overcome the galvanic corrosion that occurs between graphite and matrix. In this work, we investigated the corrosion of ductile cast iron in tap water with/without inhibitors. The corrosion rate was measured using chemical immersion test and electrochemical methods, including anodic polarization test. The inhibited surface was analyzed using EPMA and XPS. Test solutions were analyzed by performing FT-IR measurement. When triethanolamine and nitrite coexisted in tap water, synergistic effect built up, and the inhibition effect was ca. 30 times more effective than witnessed with single addition. This work focused on the synergistic effect brought about by nitrite and triethanolamine and its novel mechanism was also proposed.

  4. Effect of Flow Velocity on Corrosion Rate and Corrosion Protection Current of Marine Material

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seong Jong [Kunsan National University, Kunsan (Korea, Republic of); Han, Min Su; Jang, Seok Ki; Kim, Seong Jong [Mokpo National Maritime University, Mokpo (Korea, Republic of)

    2015-10-15

    In spite of highly advanced paint coating techniques, corrosion damage of marine metal and alloys increase more and more due to inherent micro-cracks and porosities in coatings formed during the coating process. Furthermore, flowing seawater conditions promote the breakdown of the protective oxide of the materials introducing more oxygen into marine environments, leading to the acceleration of corrosion. Various corrosion protection methods are available to prevent steel from marine corrosion. Cathodic protection is one of the useful corrosion protection methods by which the potential of the corroded metal is intentionally lowered to an immune state having the advantage of providing additional protection barriers to steel exposed to aqueous corrosion or soil corrosion, in addition to the coating. In the present investigation, the effect of flow velocity was examined for the determination of the optimum corrosion protection current density in cathodic protection as well as the corrosion rate of the steel. It is demonstrated from the result that the material corrosion under dynamic flowing conditions seems more prone to corrosion than under static conditions.

  5. Strain rate effects in stress corrosion cracking

    Energy Technology Data Exchange (ETDEWEB)

    Parkins, R.N. (Newcastle upon Tyne Univ. (UK). Dept. of Metallurgy and Engineering Materials)

    1990-03-01

    Slow strain rate testing (SSRT) was initially developed as a rapid, ad hoc laboratory method for assessing the propensity for metals an environments to promote stress corrosion cracking. It is now clear, however, that there are good theoretical reasons why strain rate, as opposed to stress per se, will often be the controlling parameter in determining whether or not cracks are nucleated and, if so, are propagated. The synergistic effects of the time dependence of corrosion-related reactions and microplastic strain provide the basis for mechanistic understanding of stress corrosion cracking in high-pressure pipelines and other structures. However, while this may be readily comprehended in the context of laboratory slow strain tests, its extension to service situations may be less apparent. Laboratory work involving realistic stressing conditions, including low-frequency cyclic loading, shows that strain or creep rates give good correlation with thresholds for cracking and with crack growth kinetics.

  6. INHIBITION OF THE CORROSION OF MILD STEEL IN ...

    African Journals Online (AJOL)

    explained in terms of the difference in their molecular structures and solubility rather than .... Kinetic and thermodynamic data for the corrosion of mild steel in 0.1 M HCl solution containing ... transition state theory for ING and IN, respectively.

  7. Branched Polymers and their Application in Corrosion Inhibition for mild steel in 1M H2SO4 medium

    Directory of Open Access Journals (Sweden)

    Sounthari. P

    2014-12-01

    Full Text Available The adsorption and corrosion inhibiting effect of branched polymers (BATP, BAAZ, BETP & BEAZ on mild steel in 1M H2SO4 at 30±1˚C was investigated using gravimetric, electrochemical impedance spectroscopy (EIS, and potentiodynamic polarization techniques. The experimental findings revealed that BATP inhibited the corrosion reaction in the acid environment to greater extend compared to BAAZ, BETP and BEAZ. Impedance results indicate that the polymers were adsorbed on the metal/solution interface, while polarization data showed that the polymers behaved mostly as mixed-type inhibitors. Kinetic parameters (activation energy, pre-exponential factor, enthalpy of activation and entropy of activation as well as thermodynamic parameters (enthalpy of adsorption, entropy of adsorption and Gibbs free energy were calculated and discussed. Scanning electron microscopy technique was used to confirm the effectiveness of inhibition of mild steel in sulphuric acid medium.

  8. Inhibition of cold rolled steel corrosion by Tween-20 in sulfuric acid: weight loss, electrochemical and AFM approaches.

    Science.gov (United States)

    Mu, Guannan; Li, Xianghong

    2005-09-01

    The inhibiting action of a nonionic surfactant of Tween-20 on the corrosion of cold rolled steel (CRS) in 0.5-7.0 M sulfuric acid (H(2)SO(4)) was studied by weight loss and potentiodynamic polarization methods. Atomic force microscope (AFM) provided the surface conditions. The results show that inhibition efficiency increases with the inhibitor concentration, while it decreases with the sulfuric acid concentration. The adsorption of inhibitor on the cold rolled steel surface obeys the Langmuir adsorption isotherm equation. Effect of immersion time was studied and discussed. The effect of temperature on the corrosion behavior of cold rolled steel was also studied at four temperatures ranging from 30 to 60 degrees C, the thermodynamic parameters such as adsorption heat, adsorption free energy, and adsorption entropy were calculated. The results revealed that the adsorption was physisorption mechanism. A kinetic study of cold rolled steel in uninhibited and inhibited acid was also discussed. The kinetic parameters such as apparent activation energy, pre-exponential factor, rate constant, and reaction constant were calculated for the reactions of corrosion. The inhibition effect is satisfactorily explained by both thermodynamic and kinetic models. Polarization curves show that Tween-20 is a cathodic-type inhibitor in sulfuric acid. The results obtained from weight loss and potentiodynamic polarization are in good agreement, and the Tween-20 inhibition action could also be evidenced by surface AFM images.

  9. Theoretical study of inhibition efficiencies of some amino acids on corrosion of carbon steel in acidic media: green corrosion inhibitors.

    Science.gov (United States)

    Dehdab, Maryam; Shahraki, Mehdi; Habibi-Khorassani, Sayyed Mostafa

    2016-01-01

    Inhibition efficiencies of three amino acids [tryptophan (B), tyrosine (c), and serine (A)] have been studied as green corrosion inhibitors on corrosion of carbon steel using density functional theory (DFT) method in gas and aqueous phases. Quantum chemical parameters such as EH OMO (highest occupied molecular orbital energy), E LUMO (lowest unoccupied molecular orbital energy), hardness (η), polarizability ([Formula: see text]), total negative charges on atoms (TNC), molecular volume (MV) and total energy (TE) have been calculated at the B3LYP level of theory with 6-311++G** basis set. Consistent with experimental data, theoretical results showed that the order of inhibition efficiency is tryptophan (B) > tyrosine (C) > serine (A). In order to determine the possible sites of nucleophilic and electrophilic attacks, local reactivity has been evaluated through Fukui indices.

  10. A comparative study of the inhibition effects of benzotriazole and 6-aniline-1,3,5-triazine-2,4-dithiol monosodium salt on the corrosion of copper by potentiodynamic polarization, AC impedance and surface-enhanced Raman spectroscopic techniques

    Science.gov (United States)

    Zhou, Guoding; Cai, Shengmin; Song, Liqun; Yang, Huaquan; Fujishima, A.; Ibrahim, A.; Lee, Y. G.; Loo, B. H.

    1991-11-01

    The inhibition effects of benzotriazole (BTA) and 6-aniline-1,3,5-triazine-2,4-dithiol (ATD) monosodium salt on copper corrosion have been studied by the potentiodynamic polarization, AC impedance and surface-enhanced Raman spectroscopic techniques. The polarization resistance Rp increases with the concentration of either BTA or ATD. From the plots of the phase shift θ versus logarithm of the frequency, it is found that θ is close to 90° after the copper electrode is immersed for a long period of time in BTA-containing solution which indicates the behavior of an ideal capacitor. In ATD-containing solutions, θ is close to 45 ° which shows the appearance of a Warburg impedance for a diffusion process. Surface-enhanced Raman spectroscopic studies of the competitive adsorption of BTA and ATD on copper surfaces indicate that BTA adsorbs better than ATD. Based on these results, it is concluded that the inhibition action of BTA is better than that of ATD.

  11. Inhibition of Copper Pitting Corrosion in Aggressive Potable Waters

    Directory of Open Access Journals (Sweden)

    Emily Sarver

    2012-01-01

    Full Text Available Copper pitting corrosion can lead to premature plumbing failures, and can be caused by aggressive potable waters characterized by high pH, free chlorine residual and low alkalinity. In such waters and under continuous flow, certain inhibitors including phosphate, silica or natural organic matter may greatly reduce pitting occurrence. In the current work, 1 mg/L phosphate (as P completely prevented initiation of pits, and 5 mg/L silica (as Si significantly decelerated pitting. However, much lower doses of these inhibitors had little benefit and actually accelerated the rate of attack in some cases. Effects of organic matter were dependent on both the type (e.g., natural versus ozonated humic substances and dosage. Dose-response effects of free chlorine and alkalinity were also investigated. Based on electrochemical data, pits initiated more rapidly with increased free chlorine, but even moderate levels of chlorine (~0.4 mg/L eventually caused severe pitting. High alkalinity decreased pit propagation rates but did not prevent pit formation.

  12. Inorganic Corrosion-Inhibitive Pigments for High-Temperature Alkali-activated Well Casing Foam Cement

    Energy Technology Data Exchange (ETDEWEB)

    Sugama, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Pyatina, T. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-11-01

    This study evaluates inorganic pigments for improving carbon steel (CS) brine-corrosion protection by the sodium metasilicate-activated calcium aluminate cement/Fly Ash blend at 300°C. Calcium borosilicate (CBS) and zinc phosphate, significantly improved CS corrosion-protection by decreasing cement’s permeability for corrosive ions and inhibiting anodic corrosion. An amorphous Na2O-Al2O3-SiO2-H2O phase tightly attached to CS surface formed at 300oC in CBS-modified cement pore solution. The corrosion rate of the CS covered with this phase was nearly 4-fold lower than in the case of nonmodified cement pore solution where the major phase formed on the surface of CS was crystalline analcime.

  13. Inorganic Corrosion-Inhibitive Pigments for High-Temperature Alkali-activated Well Casing Foam Cement

    Energy Technology Data Exchange (ETDEWEB)

    Sugama, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Pyatina, T. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-11-14

    This study evaluates inorganic pigments for improving carbon steel (CS) brine-corrosion protection by the sodium metasilicate-activated calcium aluminate cement/Fly Ash blend at 300°C. Calcium borosilicate (CBS) and zinc phosphate, significantly improved CS corrosion-protection by decreasing cement’s permeability for corrosive ions and inhibiting anodic corrosion. An amorphous Na2O-Al2O3-SiO2-H2O phase tightly attached to CS surface formed at 300oC in CBS-modified cement pore solution. The corrosion rate of the CS covered with this phase was nearly 4-fold lower than in the case of nonmodified cement pore solution where the major phase formed on the surface of CS was crystalline analcime.

  14. Corrosion inhibition mechanisms of aluminum alloy 2024-T3 by selected non-chromate inhibitors

    Science.gov (United States)

    Lopez-Garrity, Omar A.

    The pursuit to find a chromate-alternative has led to the development of several chromate-free aerospace primers and coating systems that offer good protection. However, fundamental understanding of the functionality of the chromate-free pigments that are embedded within these coating systems is lacking. The objective of this study was to understand the fundamental mechanism of corrosion inhibition of aluminum alloy 2024-T3 by molybdate (MoO 42-), silicate (SiO32-), and praseodymium (Pr3+) with the goal of developing the kind of understanding that was accomplished for chromate. Furthermore, since most inhibiting conversion coatings and pigments act by releasing soluble species into the local environment, it was of interest to understand the mechanism of inhibition in aqueous 0.1 M NaCl solution. The mechanism of inhibition of AA2024-T3 by the select non-chromate inhibitors was investigated using various electrochemical, microscopic and spectroscopic techniques. Naturally aerated polarization curves showed that molybdate provided mixed inhibition in near-neutral pH and at a threshold concentration of 0.1 M. The largest effect was a 250 mV increase in the breakdown potential associated with pitting and a 350 mV decrease in the open-circuit potential (OCP). In addition, electrochemical impedance indicated that the corrosion inhibition mechanism is oxygen-dependent owing to the protection afforded by Mo(VI) species. It was proposed that the corrosion inhibition of AA2024-T3 by molybdate may occur following a two-step process whereby molybdate is rapidly reduced to MoO.(OH)2 over the intermetallic particles and is subsequently oxidized to intermediate molybdenum oxides (e.g. Mo4O11) in the presence of oxygen which is reduced. This in turn may lead to a local acidification, promoting the condensation and polymerization of molybdate species in solution to form polymolybdate species (Mo7O24 6- and Mo8O264-). Furthermore, S-phase particle dissolution is decreased

  15. Inhibition of corrosion of carbon steel by heptane sulphonic acid – Zn2+ system

    Directory of Open Access Journals (Sweden)

    C. MARY ANBARAS

    2012-03-01

    Full Text Available Corrosion inhibition of carbon steel in dam water by sodium heptane sulphonate (SHS and zinc ion system was investigated using weight loss and potentiodynamic polarization methods. Results of weight loss method indicated that inhibition efficiency (IE increased as the inhibitor concentration increased. A synergistic effect existed between SHS and Zn2+. The influence of sodium potassium tartrate (SPT on the IE of the SHS-Zn2+ system was evaluated. As the immersion period increased, the IE decreased. Polarization study revealed that SHS-Zn2+ system functioned as a cathodic inhibitor. AC impedance spectra revealed that a protective film was formed on the metal surface. The nature of the metal surface was analyzed by FTIR spectra, SEM and AFM analyses.

  16. Inhibition of corrosion of carbon steel in well water by arginine-Zn2+ system

    Directory of Open Access Journals (Sweden)

    ANTHONY SAMY SAHAYA RAJA

    2012-06-01

    Full Text Available The environmental friendly inhibitor system arginine-Zn2+, has been investigated by weight-loss method. A synergistic effect exists between arginine and Zn2+ system. The formulation consisting of 250 ppm of arginine and 5 ppm of Zn2+ offers good inhibition efficiency of 98 %. Polarization study reveals that this formulation functions as an anodic inhibitor. AC impedance spectra reveal that a protective film is formed on the metal sur­face. The FTIR spectral study leads to the conclusion that the Fe2+- DL-arginine complex, formed on anodic sites of the metal surface, controls the anodic reaction. Zn(OH2 formed on the cathodic sites of the metal surface controls the cathodic reaction. The surface morphology and the roughness of the metal surface were analyzed with Atomic Force Microscope. A suitable mechanism of corrosion inhibition is proposed based on the results obtained from weight loss study and surface analysis technique.

  17. Corrosion inhibition performance of different bark extracts on aluminium in alkaline solution

    Directory of Open Access Journals (Sweden)

    Namrata Chaubey

    2017-02-01

    Full Text Available The present work shows the effect of stem bark extracts of three trees namely Moringa oleifera (MO, Terminalia arjuna (TA and Mangifera indica (MI on the corrosion behaviour of Aluminium Alloy (AA in 1 M NaOH. The inhibition performance was studied by using gravimetric, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS measurements. Among these extracts, MO exhibited the maximum inhibition efficiency η (% of 85.3% at 0.6 g/L at 303 K. Polarization measurement showed that all the examined extracts are of mixed-type inhibitors. Langmuir’s adsorption isotherm was found to be best fit. Morphology of the surface was examined by scanning electron microscopy (SEM and atomic force microscopy (AFM which confirmed the existence of a protective film of inhibitor molecule on AA surface.

  18. Study on Corrosion Inhibition Efficiency of Stem Alkaloid Extract of Different Varieties of Holy Basil on Aluminium in HCl Solution

    Energy Technology Data Exchange (ETDEWEB)

    Kumpawat, Nutan; Chaturvedi, Alok; Upadhyay, R. K. [Synthetic and Surface Science Laboratory, Ajmer (India)

    2012-08-15

    Corrosion inhibition efficiencies of holy basil on Al in HCl solution were studied by weight loss and thermometric methods in presence and in absence of stem extract of three different varieties of holy basil viz. ocimum basilicum (E{sub B}), ocimum canum (E{sub C}) and ocimum sanctum (E{sub S}). Inhibition efficiency increases with the increasing concentration of stem extract and decreases with increases in acid strength. Results show that all varieties under study are good corrosion inhibitors, among which, E{sub B} is most effective. Maximum inhibition efficiency was found 97.09% in 0.5N HCl solution with 0.6% stem extract. The Langmuir adsorption isotherm indicates that surface coverage also increases with increasing in the concentration of extract of stem in HCl solution.

  19. Experimental and quantum chemical studies on corrosion inhibition performance of quinoline derivatives for MS in 1N HCl

    Indian Academy of Sciences (India)

    B M Mistry; N S Patel; S Sahoo; S Jauhari

    2012-06-01

    The corrosion inhibition effect of two quinoline derivatives, viz. 2-chloro quinoline 3-carbaldehyde (CQC) and (2-chloro-quinoline-3ylmethyl)--tolyl-amine (CQA) have been investigated against mild steel (MS) in 1N HCl solution using conventional weight loss, potentiodynamic polarization, linear polarization and electrochemical impedance spectroscopy. The losses in weights of MS samples have proved that both CQC and CQA are efficient inhibitors of corrosion. The mixed mode of inhibition was confirmed by electrochemical polarizations. The results of electrochemical impedance spectroscopy have showed changes in the impedance parameters like charge transfer resistance and double-layer capacitance that confirmed strong adsorption of inhibitors on the MS surface. The inhibition action of these compounds was assumed to occur via adsorption on the steel surface through the active centres contained in the molecules. Furthermore, quantum chemical calculations have been performed at B3LYP/6-31G( , ) level to complement the experimental evidence.

  20. Inhibition of copper corrosion in sodium chloride solution by the self-assembled monolayer of sodium diethyldithiocarbamate

    Energy Technology Data Exchange (ETDEWEB)

    Liao, Q.Q., E-mail: liaoqq1971@yahoo.com.c [Key Lab of Shanghai Colleges and Universities for Electric Power Corrosion Control and Applied Electrochemistry, Shanghai Engineering Research Center of Energy - Saving in Heat Exchange Systems, Shanghai University of Electric Power, Shanghai 200090 (China); Yue, Z.W.; Yang, D. [Key Lab of Shanghai Colleges and Universities for Electric Power Corrosion Control and Applied Electrochemistry, Shanghai Engineering Research Center of Energy - Saving in Heat Exchange Systems, Shanghai University of Electric Power, Shanghai 200090 (China); Wang, Z.H. [Department of Chemistry, Tongji University, Shanghai 200092 (China); Li, Z.H. [Department of Chemistry, Fudan University, Shanghai 200433 (China); Ge, H.H. [Key Lab of Shanghai Colleges and Universities for Electric Power Corrosion Control and Applied Electrochemistry, Shanghai Engineering Research Center of Energy - Saving in Heat Exchange Systems, Shanghai University of Electric Power, Shanghai 200090 (China); Li, Y.J. [Department of Chemistry, Tongji University, Shanghai 200092 (China)

    2011-05-15

    Research highlights: DDTC is of low toxicity. DDTC SAM had good corrosion inhibition effects on copper in 3% NaCl solution. DDTC SAM was chemisorbed on copper surface by its S atoms. - Abstract: Sodium diethyldithiocarbamate (DDTC) self-assembled monolayer (SAM) on copper surface has been investigated by SERS and EDS and the results show that DDTC SAM is chemisorbed on copper surface by its S atoms with tilted orientation. Corrosion inhibition ability of DDTC SAM was measured in 3% NaCl solution using electrochemical methods. The impedance results indicate that the maximum inhibition efficiency of DDTC SAM can reach 99%. Quantum chemical calculations show that DDTC has relatively small {Delta}E between HOMO and LUMO and large negative charge in its two sulfur atoms, which facilitates the formation of a DDTC SAM on copper surface.

  1. Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by Ciprofloxacin Drug

    Directory of Open Access Journals (Sweden)

    Inemesit A. Akpan

    2013-01-01

    Full Text Available The inhibition of mild steel corrosion in hydrochloric acid solution by ciprofloxacin drug as an eco-friendly and commercially available inhibitor was studied at room temperature by weight loss technique. It was found that the test drug has a promising inhibitory action against corrosion of mild steel in the medium investigated. The inhibition efficiency was found to increase with a corresponding increase in the concentration of the inhibitor. It was also found that the adsorption as well as the inhibition process followed a first-order kinetics and obeyed Langmuir’s adsorption isotherm.

  2. Corrosion inhibition of steel in sulfuric acidic solution by the Chenopodium Ambrosioides Extracts

    Directory of Open Access Journals (Sweden)

    L. Bammou

    2014-10-01

    Full Text Available The influence of natural occurring extract of Chenopodium Ambrosioides (CAE on the corrosion inhibition of carbon steel in sulfuric acid solution is studied by the weight loss method, potentiodynamic polarization and impedance spectroscopy (EIS measurements. The experimental results reveal that extract has a good inhibiting effect on the metal tested in 0.5 M H2SO4 solution. The protection efficiency increases with increasing inhibitor concentration to attain 94% at 4 g/l. Potentiodynamic polarization studies clearly reveal that it acts essentially as a cathodic inhibitor. EIS results show that the change in the impedance parameters (Rt and Cdl with concentration of extract of Chenopodium Ambrosioides is indicative of the adsorption of molecules leading to the formation of a protective layer on the surface of carbon steel. The efficiency decreases with temperature. The adsorption of Chenopodium Ambrosioides extract is found to obey the Langmuir adsorption isotherm. The activation energies and enthalpies of the corrosion process of carbon steel in acidic medium were determined.

  3. Corrosion and Corrosion Inhibition of High Strength Low Alloy Steel in 2.0 M Sulfuric Acid Solutions by 3-Amino-1,2,3-triazole as a Corrosion Inhibitor

    Directory of Open Access Journals (Sweden)

    El-Sayed M. Sherif

    2014-01-01

    Full Text Available The corrosion and corrosion inhibition of high strength low alloy (HSLA steel after 10 min and 60 min immersion in 2.0 M H2SO4 solution by 3-amino-1,2,4-triazole (ATA were reported. Several electrochemical techniques along with scanning electron microscopy (SEM and energy dispersive X-ray (EDS were employed. Electrochemical impedance spectroscopy indicated that the increase of immersion time from 10 min to 60 min significantly decreased both the solution and polarization resistance for the steel in the sulfuric acid solution. The increase of immersion time increased the anodic, cathodic, and corrosion currents, while it decreased the polarization resistance as indicated by the potentiodynamic polarization measurements. The addition of 1.0 mM ATA remarkably decreased the corrosion of the steel and this effect was found to increase with increasing its concentration to 5.0 mM. SEM and EDS investigations confirmed that the inhibition of the HSLA steel in the 2.0 M H2SO4 solutions is achieved via the adsorption of the ATA molecules onto the steel protecting its surface from being dissolved easily.

  4. A Comparative Study on Corrosion Inhibition of Mild Steel Using Piper Nigrum L. in Different Acid Medium

    Directory of Open Access Journals (Sweden)

    B. Anand

    2010-01-01

    Full Text Available The inhibition of corrosion of mild steel using Piper nigrum L in different acid medium by weight loss method was investigated. The corrosion inhibition was studied in hydrochloric acid and sulphuric acid by weight loss method at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of this compound was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior of Piper nigrum L is greater in sulphuric acid than hydrochloric acid. So, Piper nigrum L can be used as a good inhibitor for preventing mild steel material.

  5. Corrosion inhibition efficiency of water soluble ethoxylated trimethylol propane by gravimetric analysis

    Directory of Open Access Journals (Sweden)

    A.A. Abdel-Azim

    2014-03-01

    Full Text Available Polyoxyethylenated trimethylol propane monolaurate surfactants with varied ethylene oxide content were tested as corrosion inhibitors via the weight loss method. Weight loss measurements for carbon steel dissolution were performed in 1 N HCl containing different inhibitor concentrations at 30, 40 and 50 °C. These measurements were utilized for calculating corrosion rate, surface coverage area and percentage inhibition. The obtained data show that the adsorption of these inhibitors obeys Langmuir adsorption isotherm. Thermodynamic parameters (ΔG∗, ΔH∗ and ΔS∗ of the corrosion process are evaluated and correlated to inhibitors structures.

  6. An Electrochemical Study on the Corrosion Inhibition of Stainless Steel by Polyaniline Film

    Institute of Scientific and Technical Information of China (English)

    Hao WANG; Lin NIU; Qiu Hong LI; Su Xiang WU; Feng Hua WEI

    2004-01-01

    Polyaniline(PANI) film was electrosynthesized on 304 stainless steel by cyclic voltammetry using aqueous oxalic acid as supporting electrolyte. The potential sweep rates were changed to achieve the PANI film with different thickness and structures. Protective properties of the PANI film for corrosion of stainless steel in 3% NaCl aqueous solution were investigated by monitoring potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS).The results showed that the PANI film which was formed with lower sweep rate led to more positive shift of corrosion potential and greater charge transfer resistance, reflecting higher inhibition for corrosion of the stainless steel.

  7. Corrosion inhibiting repair and rehabilitation treatment process for reinforced concrete structures

    OpenAIRE

    1994-01-01

    A repair and rehabilitation treatment process for reinforced concrete structures involves the removal of concrete from above rebar or other metal reinforcement material in the concrete structure. After removal of concrete, the metal reinforcement materials are saturated with corrosion inhibiting agents. Saturation is best achieved by multiple spray applications of the corrosion inhibitor. The cavity in the concrete structure with the treated rebar or other metal reinforcement materials is the...

  8. Corrosion inhibition of carbon steel in tetra-n-butylammonium bromide aqueous solution by benzotriazole and Na{sub 3}PO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Liu Song [Department of Applied Chemistry, South China University of Technology, Wushan 1, Guangzhou 510640 (China)], E-mail: chsliu@scut.edu.cn; Xu Nannan; Duan Jinmei; Zeng Zhenou [Department of Applied Chemistry, South China University of Technology, Wushan 1, Guangzhou 510640 (China); Feng Ziping; Xiao Rui [Guangzhou Institute of Energy Conversion, CAS, Guangzhou 510640 (China)

    2009-06-15

    The corrosion inhibition behavior of benzotriazole, Na{sub 3}PO{sub 4} and their mixture on carbon steel in 20 wt.% (0.628 mol l{sup -1}) tetra-n-butylammonium bromide aerated aqueous solution was investigated by weight-loss test, potentiodynamic polarization measurement, electrochemical impedance spectroscopy and scanning electron microscope/energy dispersive X-ray techniques. The inhibition action of BTA or SP or inhibitors mixture on the corrosion of carbon steel is mainly due to the inhibition of anodic process of corrosion. The results revealed that inhibitors mixtures have shown synergistic effects at lower concentration of inhibitors. At 2 g l{sup -1} BTA and 2 g l{sup -1} SP showed optimum enhanced inhibition compared with their individual effects.

  9. Influence of alkyl group of imidazolinyl-quaternary-ammonium-salt on corrosion inhibition efficiency

    Institute of Scientific and Technical Information of China (English)

    SHI Shun-cun; WANG Xue-ye; YI Ping-gui; CAO Chen-zhong; DENG Tong-tong; SU Jie-shu

    2006-01-01

    The action between imidazolinyl-quaternary-ammonium-salt(IQAS) molecule and Fe atom was studied,and the influence of the alkyl group connected with N atom of imidazoline ring on corrosion inhibition efficiency was explored. Quantum chemical methods, HF/6- 31 G and HF/Lan L2 dz, were applied successively to calculate the parameters such as front molecular orbit energy of IQAS Ⅰ-Ⅳ and chemical adsorption for IQAS Ⅰ-Ⅳ and Fe atom.The corrosion inhibition efficiency was measured with the weight loss method of carbon steel samples in acidic solution and oil field sewage. Based on the theoretical analyses and experimental results, it is concluded that N-Fe coordination bond is formed between IQAS molecule and Fe atom, corrosion inhibition efficiency is decreased in the following order(from large to small): IQAS Ⅳ, IQAS Ⅲ, IQAS Ⅱ , IQAS Ⅰ.

  10. Adsorption and corrosion inhibition of mild steel in acidic media by expired pharmaceutical drug

    Directory of Open Access Journals (Sweden)

    P. Geethamani

    2015-12-01

    Full Text Available The inhibitive action of an examined expired Ambroxol drug on the corrosion of mild steel in 1 M HCl and 1 M H2SO4 acid medium has been studied by weight loss and electrochemical techniques. The weight loss techniques result was discussed. The inhibition efficiency increases with increasing the concentration of the inhibitor. Electrochemical studies data support that examined expired drug is an efficient inhibitor for mild steel corrosion. The adsorption of the examined drug obeys Langmuir’s adsorption isotherm. Polarization studies indicate that this inhibitor acts as a mixed type inhibition. The various thermodynamic parameters were calculated and discussed. The protective film formed on the surface was confirmed by SEM. The data collected from the studied techniques are in good agreement to confirm the ability of using expired Ambroxol drug as corrosion inhibitor for mild steel in both acid media.

  11. Corrosion Inhibition of Mild Steel in Citric Acid by Aqueous Extract of Piper Nigrum L.

    Directory of Open Access Journals (Sweden)

    P. Matheswaran

    2012-01-01

    Full Text Available The inhibition efficiency (IE of an aqueous extract of Piper Nigrum L. in controlling corrosion of mild steel at pH 12 has been evaluated by weight loss method in the absence and presence of inhibitor in citric acid medium at different concentration. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with the different concentration at two hour time interval at room temperature. Also, it was found that the corrosion inhibition behaviour of Piper Nigrum L. is greater in 2 N Citric acid than 1 N Citric acid medium. So Piper Nigrum L. can be used has a good inhibitor for preventing mild steel material which is used in many construction purpose.

  12. Application of Moessbauer spectroscopy to the study of tannins inhibition of iron and steel corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Jaen, Juan A., E-mail: jjaen@ancon.up.ac.pa [Universidad de Panama, CITEN, Depto. de Quimica Fisica (Panama); Obaldia, J. De; Rodriguez, M. V. [Universidad de Panama, Escuela de Quimica, Facultad de Ciencias Naturales, Exactas y Tecnologia (Panama)

    2011-11-15

    The inhibitory effect of tannins was investigated using, among others, potentiodynamic polarizations and Moessbauer spectroscopy. These techniques confirmed that the nature, pH and concentration of tannic solution are of upmost importance in the inhibitory properties of the solutions. It is observed that at low tannin concentration or pH, both, hydrolizable and condensed tannins, effectively inhibit iron corrosion, due to the redox properties of tannins. At pH Almost-Equal-To 0, Moessbauer spectra of the frozen aqueous solutions of iron(III) with the tannin solutions showed that iron is in the form of a monomeric species [Fe(H{sub 2}O){sub 6}]{sup 3 + }, without coordination with the functional hydroxyl groups of the tannins. The suspended material consisted of amorphous ferric oxide and oxyhydroxides, though with quebracho tannin partly resulted in complex formation and in an iron (II) species from a redox process. Other tannins, such as chestnut hydrolysable tannins, do not complex iron at this low pH. Tannins react at high concentrations or pH (3 and 5) to form insoluble blue-black amorphous complexes of mono-and bis-type tannate complexes, with a relative amount of the bis-ferric tannate generally increasing with pH. Some Fe{sup 2 + } in the form of hydrated polymeric ferrous tannate could be obtained. At pH 7, a partially hydrolyzed ferric tannate complex was also formed. The latter two phases do not provide corrosion protection. Tannin solutions at natural pH react with electrodeposited iron films (approx. 6 {mu}m) to obtain products consisting only on the catecholate mono-complex of ferric tannate. Some aspects of the mechanism of tannins protection against corrosion are discussed.

  13. Inhibition of pH fronts in corrosion cells due to the formation of cerium hydroxide

    NARCIS (Netherlands)

    Soestbergen, M. van; Erich, S.J.F.; Huinink, H.P.; Adan, O.C.G.

    2013-01-01

    The effect of cerium-based corrosion inhibitors on the pH front between the alkaline cathode and acidic anode in corrosion cells has been studied. The cerium component of these inhibitors can affect the pH front since it precipitates in an alkaline environment as cerium hydroxide, which is important

  14. Corrosion Inhibition on SAE 1010 Steel by Nanoscale Exopolysaccharides Coatings Determined by Electrochemical and Surface Characterization

    Science.gov (United States)

    Plating, painting and the application of enamel are the most common anti-corrosion treatments. They are effective by providing a barrier of corrosion resistant material between the damaging environment and the structural material. Coatings start failing rapidly if scratched or damaged because a co...

  15. Adsorption and Inhibitive Properties of Triazolo- pyrimidine Derivatives in Acid Corrosion of Mild Steel

    Directory of Open Access Journals (Sweden)

    K. Parameswari

    2011-01-01

    Full Text Available Inhibitive and adsorption properties of synthesized triazolo- pryimidine derivatives (P1, P2 & P3 for the corrosion of mild steel was investigated using weight loss and electrochemical methods. Inhibition efficiency increased as the concentration of the inhibitor increased but decreased with increase in temperature. The triazolopyrimidines were found to act as adsorption inhibitors for the corrosion of mild steel. The adsorption mechanism of the triazolopyrimidine was found to be physisorption, spontaneous and exothermic. Also the adsorption followed Langmuir adsorption isotherm. polarisation studies showed that the inhibitors behave as cathodic type.

  16. Inhibiting Properties of Morpholine as Corrosion Inhibitor for Mild Steel in 2N Sulphuric Acid and Phosphoric Acid Medium

    Directory of Open Access Journals (Sweden)

    K. Jayanthi

    2012-01-01

    Full Text Available The inhibition effect of morpholine on the corrosion of mild steel in 2N sulphuric acid and phosphoric acid has been studied by mass loss and polarization techniques between 302K and 333K. The inhibition efficiency increased with increase in concentration. The corrosion rate increased with increase in temperature and decreased with increase in concentration of inhibitor compared to blank. The adsorption of inhibitor on the mild steel surface has been found to obey Temkin's adsorption isotherm. Potentiostatic polarization results reveal that morpholine act as mixed type inhibitor. The values of activation energy (Ea, free energy of adsorption (∆Gads, enthalpy of adsorption (∆H, and entropy of adsorption (∆S were also calculated.

  17. Corrosion Inhibition of Imidazoline Derivates with Benzene Rings on Mild Steel in CO2-Saturated Brine Solution

    Institute of Scientific and Technical Information of China (English)

    CHEN Guo-hao; ZHAO Jing-mao

    2012-01-01

    Corrosion inhibition of three imidazoline derivates with different numbers of benzcne rings,namely 2-phenyl-1-ethylamino imidazoline(CI-1),2-phcnyl-1-ethylamino-1-methylbenzyl quaternary imidazoline(CI-12) and 2-phcnyl-1-bcnzoyl ethylamino imidazoline(CI-13),on mild steel in CO2-saturated brine solution was evaluated by mass-loss method and potentiodynamic polarization method.The results show that the three imidazoline derivates can inhibit CO2 corrosion effectively with CI-12 ranking the highest.They mainly restrain the anodic dissolution and act as anodic-type inhibitors.The adsorptions of these derivates on the mild steel surface follow the Langmuir adsorption isothermal equation and belong to chemical adsorption.

  18. Anti-Corrosive Effect of Tridax Procumbens – Zn2+ System Controlling the Corrosion of Carbon Steel

    Directory of Open Access Journals (Sweden)

    C. Kumar

    2014-03-01

    Full Text Available The corrosion inhibition efficiency (IE of an aqueous extract Tridax Procumbens(TP in controlling the corrosion of carbon steel aqueous medium containing 60 ppm of chloride ions in absence and presence of Zn2+ has been studied by weight loss method. The formulation consisting of 1 ml of Tridax Procumbens extract and 150 ppm of Zn2+ offers 96% inhibition efficiency. The synergistic effect exists between Tridax Procumbens and Zn2+ system. Polarization study shows that the Tridax Procumbens – Zn2+ system function as a cathodic inhibitor. AC impedance spectra reveal that a protective film formed on the surface. The Adsorption equilibrium exhibited better fit to Langmuir isotherm than Freundlich isotherm. FTIR spectra reveal that the protective film consists of Fe2+ -Tridax Procumbens and Zn(OH2.

  19. Inhibition of copper corrosion in aerated hydrochloric acid solution by heterocyclic compounds containing a mercapto group

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Daquan; Gao Lixin; Zhou Guoding

    2004-12-01

    Inhibition of copper corrosion by benzotriazole (BTA), 2-mercapto benzoxazole (MBO) and 2-mercapto benzimidazole (MBI) in 0.5 mol L{sup -1} HCl was investigated by weight-loss measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy. MBI was shown to be the most effective inhibitor among those tested. Potentiodynamic polarization results revealed that the three compounds acted as anodic inhibitors, particularly MBI strongly suppressed anodic current densities. Molecular structure parameters of BTA, MBO and MBI were obtained by using an MM2 forcefield program and PPP-SCF quantum chemical calculation. It was found that MBI has higher levels of HOMO and LUMO energy and the larger {pi}-electron density.

  20. Corrosion Inhibition of Aluminium Using Exudate Gum from Pachylobus edulis in the Presence of Halide Ions in HCl

    Directory of Open Access Journals (Sweden)

    S. A. Umoren

    2008-01-01

    Full Text Available The anti-corrosive effect of Pachylobus edulis exudate gum in combination with halides ions (Cl–, Br– and I– for aluminium corrosion in HCl was studied at temperature range of 30-60°C using weight loss method. Results obtained showed that the naturally occurring exudate gum acts as an inhibitor for aluminium corrosion in acidic environment. Inhibition efficiency (%I increases with increase in concentration of the exudate gum and synergistically increased to a considerable extent on the addition of the halide ions. The increase in inhibition efficiency (%I and surface coverage (θ in the presence of the halides was found to be in the order I– > Br– > Cl– which indicates that the radii as well as electronegativity of the halide ions play a significant role in the adsorption process. Pachylobus edulis exudate gum obeys Temkin adsorption isotherm. Phenomenon of physical adsorption is proposed from the values of kinetic and thermodynamic parameters obtained. The values of synergism parameter (S1 obtained for the halides are greater than unity suggesting that the enhanced inhibition efficiency of the P. edulis caused by the addition of the halide ions is only due to synergistic effect.

  1. The effect of benzotriazole on brass corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Mamas, S. [Faculty of Arts and Science, Department of Chemistry, Gazi University, 40100 Kirsehir (Turkey)]. E-mail: smamas@gazi.edu.tr; Kiyak, T. [Faculty of Arts and Science, Department of Chemistry, Gazi University, 06500 Ankara (Turkey); Kabasakaloglu, M. [Faculty of Arts and Science, Department of Chemistry, Gazi University, 06500 Ankara (Turkey); Koc, A. [Faculty of Arts and Science, Department of Chemistry, Gazi University, 06500 Ankara (Turkey)

    2005-09-15

    Corrosion inhibition of benzotriazole (BTAH) for 70/30 brass in 0.1 M NaCl has been evaluated by means of electrochemical polarization and solution analysis. Electrochemical polarization curves obtained in two different benzotriazole containing 0.1 M NaCl solutions, such as 1.2 x 10{sup -4} and 2.7 x 10{sup -2} M, showed that corrosion of brass was hindered up to 0.0 V in the first solution and up to 0.4 V in the second one. For the first solution the anodic polarization curve displays two potential regions. In the first anodic region between -1.75 and 0.0 V (SCE), benzotriazole addition enhances ZnO film formation. Cu(I) BTA film is also formed by electron transfer in this region. In the second region between 0.0 and 1.0 V (SCE) copper oxidizes to Cu(I) oxides and Cu(II) hydroxide with the formation of CuCl film. Insoluble Cu(I) BTA film complex is also formed on these oxide/hydroxide films. Solution analysis after constant potential polarization showed that brass fairly corroded in 2.7 x 10{sup -2} M BTAH + 0.1 M NaCl solution although potentiodynamic polarization curves show passivity till 0.4 V (SCE). An explanatory mechanism is proposed.

  2. INHIBITION OF CORROSION OF ZINC IN (HNO3 + HCl ACID MIXTURE BY ANILINE

    Directory of Open Access Journals (Sweden)

    R.T. Vashi

    2015-05-01

    Full Text Available Corrosion of Zinc metal in (HNO3 + HCl binary acid mixture and inhibition efficiency of aniline has been studied by weight loss method and polarization technique. Corrosion rate increases with the concentration of acid mixture and the temperature. Inhibition efficiency (I.E. of aniline increases with the concentration of inhibitor while decreases with the increase in concentration of acid. As temperature increases corrosion rate increases while percentage of I.E. decreases. A plot of log (θ/1-θ versus log C results in a straight line suggest that the inhibitor cover both the anodic and cathodic regions through general adsorption following Longmuir isotherm. Galvenostatic polarization curves show polarization of both anodes as well as cathodes.

  3. Corrosion Inhibition of Carbon Steel in Chloride and Sulfate Solutions

    Directory of Open Access Journals (Sweden)

    Amr Ahmed Elsayed

    2016-02-01

    Full Text Available Corrosion is a major problem in industry and in infrastructure; a huge sum of expenditure every year is spent on preventing, retarding, and repairing its damages. This work studies the engineering of an inhibitor for carbon steel metal used in the cooling systems containing high concentration of chloride and sulfate ions. For this purpose, the synergy between the dichromate, molybdate and nitrite inhibitors is examined and optimized to the best results. Moreover, care was taken that the proposed inhibitor is compliant with the environmental laws and regulations.

  4. Studies of the corrosion inhibition of copper in Na{sub 2}SO{sub 4} solution using polarization and electrochemical impedance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hamed, E., E-mail: dr_science_7@hotmail.com [Chemistry Department, Faculty of Science, Ain Shams University, Abbassia 11566, Cairo (Egypt)

    2010-05-15

    Inhibition effect of different concentrations of potassium folate (green inhibitor) on copper corrosion in aerated Na{sub 2}SO{sub 4} solutions in the temperature range (15-55 deg. C) was investigated by using potentiodynamic polarization and electrochemical impedance spectroscopy technique. The polarization curves showed that the addition of potassium folate inhibits copper corrosion as a result of physical adsorption of folate anions on the copper surface. The folate anion acts as an anodic-type inhibitor. The inhibition efficiency increases with increasing the folate anion concentration but decreases with increasing Na{sub 2}SO{sub 4} concentration and temperature. The adsorption of folate anions on copper surface follows Flory-Huggins isotherm and kinetic-thermodynamic model. The thermodynamic parameters for corrosion and adsorption processes in the absence and presence of the inhibitor were calculated and discussed. Effect of immersion time on the performance of the inhibitor was also tested in this investigation.

  5. Density Functional Theory and Electrochemical Studies: Structure-Efficiency Relationship on Corrosion Inhibition.

    Science.gov (United States)

    Camacho-Mendoza, Rosa L; Gutiérrez-Moreno, Evelin; Guzmán-Percástegui, Edmundo; Aquino-Torres, Eliazar; Cruz-Borbolla, Julián; Rodríguez-Ávila, José A; Alvarado-Rodríguez, José G; Olvera-Neria, Oscar; Thangarasu, Pandiyan; Medina-Franco, José L

    2015-11-23

    The relationship between structure and corrosion inhibition of a series of 30 imidazol, benzimidazol, and pyridine derivatives has been established through the investigation of quantum descriptors calculated with PBE/6-311++G**. A quantitative structure-property relationship model was obtained by examination of these descriptors using a genetic functional approximation method based on a multiple linear regression analysis. Our results indicate that the efficiency of corrosion inhibitors is strongly associated with aromaticity, electron donor ability, and molecular volume descriptors. In order to calibrate and validate the proposed model, we performed electrochemical impedance spectroscopy (EIS) studies on imidazole, 2-methylimidazole, benzimidazole, 2-chloromethylbenzimidazole, pyridine, and 2-aminopyridine compounds. The experimental values for efficiency of corrosion inhibition are in good agreement with the estimated values obtained by our model, thus confirming that our approach represents a promising and suitable tool to predict the inhibition of corrosion attributes of nitrogen containing heterocyclic compounds. The adsorption behavior of imidazole or benzimidazole heterocyclic molecules on the Fe(110) surface was also studied to elucidate the inhibition mechanism; the aromaticity played an important role in the adsorbate-surface complex.

  6. Application of transient analysis using Hilbert spectra of electrochemical noise to the identification of corrosion inhibition

    NARCIS (Netherlands)

    Homborg, A.M.; Westing, E.P.M. van; Tinga, T.; Ferrari, G.M.; Zhang, X.; Wit, J.H.W. de; Mol, J.M.C.

    2014-01-01

    This study validates the ability of Hilbert spectra to investigate transients in an electrochemical noise signal for an aqueous corrosion inhibition process. The proposed analysis procedure involves the identification and analysis of transients in the electrochemical current noise signal. Their deco

  7. Application of transient analysis using Hilbert spectra of electrochemical noise to the identification of corrosion inhibition

    NARCIS (Netherlands)

    Homborg, A.M.; Westing, van E.P.M.; Tinga, T.; Ferrari, G.M.; Zhang, X.; Wit, de J.H.W.; Mol, J.M.C.

    2013-01-01

    This study validates the ability of Hilbert spectra to investigate transients in an electrochemical noise signal for an aqueous corrosion inhibition process. The proposed analysis procedure involves the identification and analysis of transients in the electrochemical current noise signal. Their deco

  8. Corrosion inhibition properties of pyrazolylindolenine compounds on copper surface in acidic media

    Directory of Open Access Journals (Sweden)

    Ebadi Mehdi

    2012-12-01

    Full Text Available Abstract Background The corrosion inhibition performance of pyrazolylindolenine compounds, namely 4-(3,3-dimethyl-3H-indol-2-yl-pyrazole-1-carbothioamide (InPzTAm, 4-(3,3-dimethyl-3H-indol-2-yl-1H-pyrazole-1-carbothiohydrazide (InPzTH and 3,3-dimethyl-2-(1-phenyl-1H-pyrazol-4-yl-3H-indole (InPzPh, on copper in 1M HCl solution is investigated by electrochemical impedance spectroscopy (EIS, open circuit potential (OCP and linear scan voltammetry (LSV techniques. Results The results show that the corrosion rate of copper is diminished by the compounds with the inhibition strength in the order of: InPzTAm> InPzTH > InPzPh. The corrosion inhibition efficiencies for the three inhibitors are 94.0, 91.4 and 79.3, for InPzTAm, InPzTH and InPzPh respectively with the same inhibitor concentration (2 mM. Conclusion From the EIS, OCP and LSV results it was concluded that pyrazolylindolenine compounds with S-atom (with an amine group have illustrated better corrosion inhibition performance compared to hydrazine and phenyl group.

  9. Quantum chemical studies on the corrosion inhibition of some hector bases on mild steel in acidic medium

    Directory of Open Access Journals (Sweden)

    Majid Khodaei-Tehrani

    2015-03-01

    Full Text Available The density functional theory (DFT at the B3LYP/6-31G (d,p basis set level method were performed on three hector bases used as corrosion inhibitors; namely, 3-anilino-5-imino-4-phenyl-1, 2,4-thiadiazoline (AIPT, 3-anilino-5-imino-4-tolyl-1, 2,4-thiadiazoline (AITT, and 4-(4-chlorophenyl-5-imino-N-phenyl-4,5-dihydro-1,2,4-thiadiazol-3-amine (AICT. They were used as corrosion inhibitors for mild steel in acidic medium in order to determine the relationship between molecular structure and their corresponding inhibition efficiency (%IE. The results of the quantum chemical calculations and experimental %IE were subjected to correlation analysis. This indicates that their inhibition effects are closely related to the highest occupied molecular orbital energy (EHOMO, the lowest unoccupied molecular orbital energy (ELUMO, the energy gap (ΔE, the hardness (η, the softness (σ, the electronegativity (χ, and the fraction of electrons transferred from the inhibitor molecule to the metal surface (ΔN. In addition, the local reactivity has been analyzed through the Fukui function. Two QSAR equations were developed and used to predict the corrosion inhibition efficiency for hector bases.

  10. Experimental and theoretical studies on inhibition of mild steel corrosion by some synthesized polyurethane tri-block co-polymers.

    Science.gov (United States)

    Kumar, Sudershan; Vashisht, Hemlata; Olasunkanmi, Lukman O; Bahadur, Indra; Verma, Hemant; Singh, Gurmeet; Obot, Ime B; Ebenso, Eno E

    2016-08-12

    Polyurethane based tri-block copolymers namely poly(N-vinylpyrrolidone)-b-polyurethane-b-poly(N-vinylpyrrolidone) (PNVP-PU) and poly(dimethylaminoethylmethacrylate)-b-polyurethane-b-poly(dimethylaminoethylmethacrylate) (PDMAEMA-PU) were synthesized through atom transfer radical polymerization (ATRP) mechanism. The synthesized polymers were characterized using nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC) methods. The corrosion inhibition performances of the compounds were investigated on mild steel (MS) in 0.5 M H2SO4 medium using electrochemical measurements, surface analysis, quantum chemical calculations and molecular dynamic simulations (MDS). Potentiodynamic polarization (PDP) measurements revealed that the polymers are mixed-type corrosion inhibitors. Electrochemical impedance spectroscopy (EIS) measurements showed that the polymers inhibit MS corrosion by adsorbing on MS surface to form pseudo-capacitive interface. The inhibitive effects of the polymers increase with increasing concentration and decrease with increasing temperature. The adsorption of both the polymers on MS surface obey the Langmuir adsorption isotherm and involves both physisorption and chemisorption mechanisms. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses showed that the polymers formed protective film on MS surface and shield it from direct acid attack. Quantum chemical calculations and molecular dynamic simulations studies corroborate experimental results.

  11. Experimental and theoretical studies on inhibition of mild steel corrosion by some synthesized polyurethane tri-block co-polymers

    Science.gov (United States)

    Kumar, Sudershan; Vashisht, Hemlata; Olasunkanmi, Lukman O.; Bahadur, Indra; Verma, Hemant; Singh, Gurmeet; Obot, Ime B.; Ebenso, Eno E.

    2016-01-01

    Polyurethane based tri-block copolymers namely poly(N-vinylpyrrolidone)-b-polyurethane-b-poly(N-vinylpyrrolidone) (PNVP-PU) and poly(dimethylaminoethylmethacrylate)-b-polyurethane-b-poly(dimethylaminoethylmethacrylate) (PDMAEMA-PU) were synthesized through atom transfer radical polymerization (ATRP) mechanism. The synthesized polymers were characterized using nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC) methods. The corrosion inhibition performances of the compounds were investigated on mild steel (MS) in 0.5 M H2SO4 medium using electrochemical measurements, surface analysis, quantum chemical calculations and molecular dynamic simulations (MDS). Potentiodynamic polarization (PDP) measurements revealed that the polymers are mixed-type corrosion inhibitors. Electrochemical impedance spectroscopy (EIS) measurements showed that the polymers inhibit MS corrosion by adsorbing on MS surface to form pseudo-capacitive interface. The inhibitive effects of the polymers increase with increasing concentration and decrease with increasing temperature. The adsorption of both the polymers on MS surface obey the Langmuir adsorption isotherm and involves both physisorption and chemisorption mechanisms. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses showed that the polymers formed protective film on MS surface and shield it from direct acid attack. Quantum chemical calculations and molecular dynamic simulations studies corroborate experimental results. PMID:27515383

  12. Experimental and theoretical studies on inhibition of mild steel corrosion by some synthesized polyurethane tri-block co-polymers

    Science.gov (United States)

    Kumar, Sudershan; Vashisht, Hemlata; Olasunkanmi, Lukman O.; Bahadur, Indra; Verma, Hemant; Singh, Gurmeet; Obot, Ime B.; Ebenso, Eno E.

    2016-08-01

    Polyurethane based tri-block copolymers namely poly(N-vinylpyrrolidone)-b-polyurethane-b-poly(N-vinylpyrrolidone) (PNVP-PU) and poly(dimethylaminoethylmethacrylate)-b-polyurethane-b-poly(dimethylaminoethylmethacrylate) (PDMAEMA-PU) were synthesized through atom transfer radical polymerization (ATRP) mechanism. The synthesized polymers were characterized using nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC) methods. The corrosion inhibition performances of the compounds were investigated on mild steel (MS) in 0.5 M H2SO4 medium using electrochemical measurements, surface analysis, quantum chemical calculations and molecular dynamic simulations (MDS). Potentiodynamic polarization (PDP) measurements revealed that the polymers are mixed-type corrosion inhibitors. Electrochemical impedance spectroscopy (EIS) measurements showed that the polymers inhibit MS corrosion by adsorbing on MS surface to form pseudo-capacitive interface. The inhibitive effects of the polymers increase with increasing concentration and decrease with increasing temperature. The adsorption of both the polymers on MS surface obey the Langmuir adsorption isotherm and involves both physisorption and chemisorption mechanisms. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses showed that the polymers formed protective film on MS surface and shield it from direct acid attack. Quantum chemical calculations and molecular dynamic simulations studies corroborate experimental results.

  13. Corrosion Inhibition Propargyl Alcohol on Low Alloy Cr Steel in 0.5 M H2SO4 in the Absence and Presence of Potassium Iodide

    OpenAIRE

    Baghaei Ravari, Fatemeh; Heydari, Mahdi; Dadgarineghad, Athareh

    2011-01-01

    The corrosion and inhibition behaviors of low alloy Cr steel in sulfuric acid in the presence of propargyl alcohol (PA) and potassium iodide (KI) have been studied using Electrochemical Impedance Spectroscopy (EIS) and Tafel polarization method. It was found that the inhibition efficiency increased with PA concentration. The addition of potassium iodide to propargyl alcohol in solution increased the inhibition efficiency of propargyl alcohol. A synergistic effect was observed between KI and P...

  14. Corrosion Inhibition Propargyl Alcohol on Low Alloy Cr Steel in 0.5 M H2SO4 in the Absence and Presence of Potassium Iodide

    OpenAIRE

    Baghaei Ravari, Fatemeh; Heydari, Mahdi; Dadgarineghad, Athareh

    2010-01-01

    The corrosion and inhibition behaviors of low alloy Cr steel in sulfuric acid in the presence of propargyl alcohol (PA) and potassium iodide (KI) have been studied using Electrochemical Impedance Spectroscopy (EIS) and Tafel polarization method. It was found that the inhibition efficiency increased with PA concentration. The addition of potassium iodide to propargyl alcohol in solution increased the inhibition efficiency of propargyl alcohol. A synergistic effect was observed between KI and P...

  15. Environmentally safe corrosion inhibition of Mg-Al-Zn alloy in chloride free neutral solutions by amino acids

    Energy Technology Data Exchange (ETDEWEB)

    Helal, N.H. [Chemistry Department, Faculty of Science, Fayoum University, Fayoum (Egypt); Badawy, W.A., E-mail: wbadawy@cu.edu.eg [Chemistry Department, Faculty of Science, Cairo University, 12 613 Giza (Egypt)

    2011-07-30

    Highlights: > Phenyl alanine at a concentration of 2 x 10{sup -3} mol dm{sup -3} gives 93% corrosion inhibition efficiency for the corrosion of the Mg-Al-Zn alloy. > The corrosion inhibition process is based on the adsorption of the amino acid molecules on the active sites of the alloy surface by physical adsorption mechanism. > The adsorption free energy was 15.72 kJ mol{sup -1}. - Abstract: The corrosion inhibition of Mg-Al-Zn alloy was investigated in stagnant naturally aerated chloride free neutral solutions using amino acids as environmentally safe corrosion inhibitors. The corrosion rate was calculated in the absence and presence of the corrosion inhibitor using the polarization technique and electrochemical impedance spectroscopy. The experimental impedance data were fitted to theoretical data according to a proposed electronic circuit model to explain the behavior of the alloy/electrolyte interface under different conditions. The corrosion inhibition process was found to depend on the adsorption of the amino acid molecules on the metal surface. Phenyl alanine has shown remarkably high corrosion inhibition efficiency up to 93% at a concentration of 2 x 10{sup -3} mol dm{sup -3}. The corrosion inhibition efficiency was found to depend on the concentration of the amino acid and its structure. The mechanism of the corrosion inhibition process was discussed and different adsorption isotherms were investigated. The free energy of the adsorption process was calculated for the adsorption of different amino acids on the Mg-Al-Zn alloy and the obtained values reveal a physical adsorption of the inhibitor molecules on the alloy surface.

  16. Dual active ionic liquids and organic salts for inhibition of microbially influenced corrosion.

    Science.gov (United States)

    Seter, Marianne; Thomson, Melanie J; Stoimenovski, Jelena; MacFarlane, Douglas R; Forsyth, Maria

    2012-06-18

    We describe a series of novel compounds designed to combat the bacterial growth that leads to microbially induced corrosion on steel in the marine environment. A synergistic effect of the ionic components in these dual active organic salts is demonstrated.

  17. Effects of chemical composition on the corrosion of dental alloys

    OpenAIRE

    GALO, Rodrigo; RIBEIRO, Ricardo Faria; RODRIGUES, Renata Cristina Silveira; Rocha, Luís Augusto; Mattos,Maria da Glória Chiarello de

    2012-01-01

    The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissolution of the ions occurred in all tested dental alloys and the results were strongly dependent on the g...

  18. Corrosion Inhibition of Aluminium by Capparis deciduas in Acidic Media

    Directory of Open Access Journals (Sweden)

    P. Arora

    2007-01-01

    Full Text Available The inhibition efficiency of ethanolic extract of different parts of Capparis deciduas (Ker in acidic medium has been evaluated by mass loss and thermometric methods. Values of inhibition efficiency obtained from the two methods are in good agreement and are dependent upon the concentration of inhibitor and acid.

  19. Corrosion monitoring as an integral component of an effective corrosion management program

    Energy Technology Data Exchange (ETDEWEB)

    Bich, N.N. [FORCE Technology Canada Inc., Calgary, AB (Canada)

    2004-07-01

    This paper presented 6 case studies of oil and sour gas transmission pipelines where the use of corrosion monitoring devices led to the early identification of ineffective mitigation measures. The field signature method inspection tool (FSM-IT) was used in all 6 cases. FSM-IT is a non-intrusive corrosion monitoring tool that consists of a geometric matrix of sensing pins that are permanently attached to an outer pipe wall. The sensing matrix wiring is coupled to a sensing matrix interface (SMI) to form an interface. With the occurrence of internal corrosion or erosion, the electrical field is changed and compared against the signature. Computer software is used to compare the new measurements against the original signature to produce metal loss values. The software is capable of trending the metal loss over time, calculating corrosion rates and creating 3D plots to illustrate accumulated wall loss over the whole matrix. The orientation of the corrosion can be determined from an evaluation of the plots. Case studies included details of pipeline length, corrosion mechanisms, and repair activities. Mitigation measures in the case studies included batching; continuous injection; and pigging. It was concluded that the FSM-IT corrosion mitigation tool is effective in monitoring mitigation effectiveness. 7 refs., 1 tab., 12 figs.

  20. Corrosion inhibition of aluminum with a series of aniline monomeric surfactants and their analog polymers in 0.5 M HCl solution

    Directory of Open Access Journals (Sweden)

    M.M. El-Deeb

    2015-07-01

    Full Text Available The inhibition effect of 3-(12-sodiumsulfonate dodecyloxy aniline monomeric surfactant (MC12 and its analog polymer Poly 3-(dodecyloxy sulfonic acid aniline (PC12 on the corrosion of aluminum in 0.5 M HCl solution was investigated using weight loss and potentiodynamic polarization techniques. The presence of these two compounds in 0.5 M HCl inhibits the corrosion of aluminum without modifying the mechanism of corrosion process. It was found that these inhibitors act as mixed-type inhibitors with anodic predominance as well as the inhibition efficiency increases with increasing inhibitor concentration, but decreases with raising temperature. Langmuir and Frumkin adsorption isotherms fit well with the experimental data. Thermodynamic functions for both dissolution and adsorption processes were determined. The obtained results from weight loss and potentiodynamic polarization techniques are in good agreement with contact angle measurements.

  1. Corrosion Inhibition and Adsorption Behavior of Clove Oil on Iron in Acidic Medium

    Directory of Open Access Journals (Sweden)

    Archana Saxena

    2012-01-01

    Full Text Available Corrosion behavior of iron in hydrochloric acid solution was studied using weight loss as well Scanning electron microscopy study without and with clove oil. The percentage inhibition efficiency increases with increasing clove oil concentration. All the data revel that the oil acts as an excellent inhibitor for the corrosion of iron in HCl solution. Thermodynamic, kinetic parameters and equilibrium constant for adsorption process were calculated from the experimental data. The adsorption of clove oil on experimental metals was found to follow the Langmuir adsorption isotherm at all the concentration studies. Scanning electron microscope (SEM, investigations also indicate that clove oil greatly lowers the dissolution currents.

  2. Quantum chemical study on the corrosion inhibition property of some heterocyclic azole derivatives

    Directory of Open Access Journals (Sweden)

    N. Anusuya

    2015-09-01

    Full Text Available Quantum chemical calculations based on density functional theory (DFT method were performed on heterocyclic azole derivatives as corrosion inhibitors for mild steel in acid media to investigate the relationship between molecular structure of the inhibitors and the corresponding inhibition efficiencies (%. Quantum chemical parameters most relevant to their potential action as corrosion inhibitors have been calculated in the non-protonated and protonated forms in aqueous phase for comparison. Results obtained in this study indicate thatin acidic media, both the protonated and non-protonated forms of the azoles represent the better actual experimental situation.

  3. Corrosion Inhibition of Leucaena Leucocephala Pod on Mild Steel in Sulphuric Acid Solution

    Institute of Scientific and Technical Information of China (English)

    P.Muthukrishnan; B.Jeyaprabha; P.Prakash

    2013-01-01

    The corrosion of the mild steel in 1 mol/L H2SO4 was investigated using Leucaena leucocephala pod extract (LLPE) as corrosion inhibitor by weight loss and electrochemical techniques.Inhibition efficiency of 95% was achieved with 500×10-6 of LLPE at 308 K.The polarization studies showed that LLPE acted as mixed type inhibitor.The adsorption of the studied inhibitor on mild steel obeyed Langmuir adsorption isotherm.Protective film formation against acid attack was confirmed by FT-IR,XRD and SEM techniques.

  4. Corrosion inhibition of iron in hydrochloric acid by polyacrylamide

    Directory of Open Access Journals (Sweden)

    DRAGICA CHAMOVSKA

    2007-07-01

    Full Text Available The corrosion protection and/or adsorption of polyacrylamide (PAA of number average molecular weight, , between 15,000 – 1,350,000 g mol-1 on mild steel and iron (99.99 % Fe in 3 M HCl at room temperature was studied using spectrophotometry (the phenanthroline method, the weight loss method and EIS (Electrochemical Impedance Spectroscopy. It was found that the corrosion protect­tion efficiency of the PAA – adsorbed layers strongly depends on both the molar concentration of PAA in the solution and its molecular weight, reaching limiting values between 85 and 96 %. Simultaneously, it was also concluded that a relatively high surface coverage could be obtained with very low PAA concentrations (0.5 – 2 ppm, indicating the good adsorption characteristics of PAA on mild steel and iron in hydrochloride acid. The experimentally obtained results follow a Lan­gmuir adsorption isotherm. According to the best fitting parameters, the adsorption coef­f­i­cient B ranged between 2×107 and 4×108 mol-1 and depended strongly on the mole­cular weight of the PAA: B = k (for a ≈ 0.67 and k = 2.95×104 or the size of the polymer coil. As was found by EIS, the thickness of the adsorbed PAA layer was approx. 1.1 nm (for er = 15 and corresponded only to the polymer segments attached to the metal surface. On the other hand, as was found by ellipsometry, the limiting layer of the adsorbed PAA molecules was highly voluminous and relatively thick (100 – 200 nm, containing entangled polymer coils.

  5. Inhibition effects of BTA on the electrochemical corrosion of copper in phosphoric acid electrolytes%苯并三唑对铜/磷酸体系电化学腐蚀抑制作用

    Institute of Scientific and Technical Information of China (English)

    翟文杰; 杨阳展; 王景贺; 闫茂振; 王金虎

    2012-01-01

    为确定苯并三唑(BTA)在铜的电解抛光液中的腐蚀抑制作用,研究铜在30%(质量分数)H3PO4+0.01 mol/L BTA抛光液中的电化学行为,测试铜在该抛光液中的极化曲线以及静态腐蚀量.应用原子力显微镜和能谱分析,观测不同阳极电势下静态腐蚀后的铜表面形貌并分析CuBTA膜的形成过程.结果表明,一定阳极电势范围下铜先行溶解,表面粗糙度加大,之后铜离子吸附BTA分子在表面逐渐形成CuBTA覆盖层,铜的溶解速度受到抑制,表面粗糙度稳定于一较低值.为保证CuBTA膜的形成,铜片所加的静态阳极电势应在0.5 V以下,本实验条件下形成稳定的CuBTA膜需要2 min.%To analyze the corrosive inhibition effects of BTA in phosphoric slurry for copper electrochemical mechanical polishing(ECMP),the electrochemical behavior of copper in 30% H3PO4 electrolyte with 0.01 mol/L benzotriazole(BTA) as an inhibitor was studied.The potentiodynamic polarization curves and the potentiostatic etching at different anodic potential of copper in the electrolyte were measured.The morphologies of the corroded workpieces were observed and the forming process of CuBTA surface film was analyzed by AFM and XPS.The results show that the surface roughness increases first with the dissolution of copper at a definite anodic potential range,then stabilizes at certain lower value owing to the dissolution inhibition effect of the Cu-BTA layer formed by adsorption of copper ions to BTA molecules.The anodic potential applied on copper should be kept below 0.5 V to sustain CuBTA film-formation,which takes near 2 min to stabilize at the test conditions.

  6. Inhibitive action of Cystine on the corrosion of low alloy steel ASTM A213 grade T22 in sulfamic acid solutions

    Directory of Open Access Journals (Sweden)

    Sayed S. Abd El Rehim

    2016-09-01

    Full Text Available The effect of Cystine on the corrosion behavior of low alloy steel ASTM A213 grade T22 in 0.5 M sulfamic acid solutions have been investigated by various electrochemical techniques. The study was performed using electrochemical impedance spectroscopy (EIS and the recent technique electrochemical frequency modulation (EFM. The results of the investigation show that the inhibition efficiency increased with increasing inhibitor concentration, but decreased with increasing the solution temperature and stirring velocity. All the collected results from the two techniques are in good agreements, which confirm the ability of EFM technique for monitoring the corrosion inhibition under the studied conditions.

  7. Effect of pellicle on galvanic corrosion of amalgam.

    Science.gov (United States)

    Holland, R I

    1984-02-01

    Galvanic corrosion of amalgam, induced by contact with a type IV dental casting gold alloy, was determined under simulated oral conditions in an electrochemical cell. The effect of a pellicle layer formed by 1 h exposure to saliva in the oral cavity was determined. Pellicle on the amalgam had no effect on the maximum corrosion rate or the 2 h corrosion charge, whereas pellicle on the gold alloy substantially reduced both these parameters of the conventional low-copper amalgam; the corrosion of the high-copper amalgam was less and was not influenced by pellicle formation.

  8. Inhibition and promotion of copper corrosion by CTAB in a microreactor system.

    Science.gov (United States)

    Murira, Caroline M; Punckt, Christian; Schniepp, Hannes C; Khusid, Boris; Aksay, Ilhan A

    2008-12-16

    We report on an optical microscopy technique for the analysis of corrosion kinetics of metal thin films in microreactor systems and use it to study the role of cetyltrimethylammonium bromide surfactant as a corrosion inhibitor in a copper-gold galvanic coplanar microsystem. A minimum in the dissolution rate of copper is observed when the surfactant concentration is approximately 0.8 mM. To explain why the inhibitory role of the surfactant does not extend to higher concentrations, we use zero resistance ammetry with separated half cells and show that while the surfactant inhibits cathodic reactions on gold, it also promotes the corrosion of copper because of the catalytic action of bromide counterions. These two competing processes lead to the observed minimum in the dissolution rate.

  9. 苯并咪唑类缓蚀剂缓蚀机理以及研究趋势%Corrosion-inhibiting mechanism and research tendency of the benzimidazole corrosion inhibitor

    Institute of Scientific and Technical Information of China (English)

    王娴

    2012-01-01

    Benzimidazole corrosion inhibitor was a kind of hydrochloride pickling inhibitor. It was possessed various inhibition efficiency because of the distinction of substitutional group. It was occupied the characteristics of high performance,low mammalian toxicity and biodegradation. It also was a kind of adsorption corrosion inhibitor, it also was involved many aspects of resistance chemical corrosion, molecular interface adsorption, the groups covering effects as well as hydrogen-bonding association effects. It was analysised and introduced the preparation method, corrosion-inhibiting mechanism and research tendency of the benzimidazole corrosion inhibitor in this article.%苯并咪唑类缓蚀剂是一类盐酸酸洗缓蚀剂,当取代基不同,其分子呈现不同的缓蚀效率。苯并咪唑类缓蚀剂具有高效、低毒和生物易降解等特点。苯并咪唑缓蚀剂是吸附型缓蚀剂,它涉及到阻化效应、分子界面吸附、基团覆盖效应和氢键缔合效应等多方面。文中介绍了苯并咪唑类缓蚀剂的制备方式、缓释机理以及发展状况。

  10. Effect of red mud addition on the corrosion parameters of reinforced concrete evaluated by electrochemical methods

    Directory of Open Access Journals (Sweden)

    D.V. Ribeiro

    Full Text Available Red mud, the main waste generated in aluminum and alumina production from bauxite ore by the Bayer process, is considered "hazardous" due to its high pH. The high pH also provides greater protection of rebars, which is reflected in the low corrosion potential and high electrical resistivity (filler effect of concrete. The corrosion potential was monitored by electrochemical measurements and the electrical resistivity was evaluated using sensors embedded in concrete test specimens. The results showed that the addition of red mud is beneficial to concrete, reducing its corrosion potential and increasing its electrical resistivity. Red mud proved to be a promising additive for concrete to inhibit the corrosion process.

  11. Corrosion inhibition of aminated hydroxyl ethyl cellulose on mild steel in acidic condition.

    Science.gov (United States)

    Sangeetha, Y; Meenakshi, S; Sairam Sundaram, C

    2016-10-05

    Aminated hydroxyethyl cellulose (AHEC) was synthesized, characterized using Fourier Transform Infrared spectroscopy (FTIR) and the corrosion inhibition of AHEC on mild steel in 1M HCl was studied using chemical and electrochemical studies. Results obtained in weight loss method showed that inhibition efficiency increased with increase in concentration of AHEC. The adsorption of the inhibitor on metal surface followed Frumkin isotherm. Polarization studies revealed that the AHEC inhibits through mixed mode. Thermodynamic parameters and activation energy were calculated and discussed. FTIR and X-ray diffraction studies (XRD) confirmed the adsorption of the inhibitor. The surface morphology was studied using Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM).

  12. 硫酸溶液中1,1'-硫代羰基二咪唑在碳钢上的吸附及缓蚀影响和碘离子的增强应%Adsorption and Corrosion Inhibition Effect of 1,1'-Thiocarbonyldiimidazole on Mild Steel in H2SO4 Solution and Synergistic Effect of Iodide Ion

    Institute of Scientific and Technical Information of China (English)

    SOLMAZ R.; MERT M.E.; KARDAS G.; YAZICI B.; ERBIL M.

    2008-01-01

    The inhibition effect of 1,1'-thiocarbonyldiimidazole (TCDI) on the corrosion behaviors of mild steel impedance spectroscopy(EIS),and linear polarization resistance(LPR)techniques.The effect of immersion time on the inhibition effect of TCDI was also investigated over 72 h.For the long.term tests.hydrogen evolution with immersion time(VH2-t)was measured in addition to the three techniques already mentioned.The thermodynamic parameters.such as adsorption equilibrium constant(Kads) and adsorption free energy(△Gads)values,were calculated and discussed.To clarify inhibition mechanism,the synergistic effect of iodide ion was also investigated.The potential of zero charge (PZC)of the MS was studied by electrochemical impedance spectroscopy method.and a mechanism of adsorption process was proposed.It was demonstrated that inhibition efficiency increased with the increase in TCDI concentration and synergistically increased in the presence of KI.The inhibition efficiency was discussed in terms ofadsorption of inhibitormolecules on the metal surface and protective film formation.

  13. Inhibition of the corrosion of mild steel in hydrochloric acid by isatin and isatin glycine

    Directory of Open Access Journals (Sweden)

    B.I. Ita

    2006-12-01

    Full Text Available The inhibition of corrosion of mild steel in hydrochloric acid by isatin glycine (ING and isatin (IN at 30-60 oC and concentrations of 0.0001 M to 0.0005 M was studied via weight loss method. At the highest inhibitor concentration studied ING exhibited inhibition efficiency of 87% while IN exhibited 84% at 60 oC. A chemical adsorption mechanism was proposed on the basis of the temperature effect and obtained average activation energy values of 143.9 kJ/mol for ING and 118.5 kJ/mol for IN. The two inhibitors were confirmed to obey the Langmuir adsorption isotherm equation at the concentrations studied. Also a first-order type of mechanism was proposed from the kinetic treatment of the result. The difference in the inhibitory properties of the inhibitors was explained in terms of the difference in their molecular structures and solubility rather than difference in molecular weights alone.

  14. Utilization of Photo-Cross-Linkable Polymer for Mild Steel Corrosion Inhibition in 1.0 M HCl Medium

    Science.gov (United States)

    Baskar, R.; Gopiraman, M.; Kesavan, D.; Subramanian, K.; Gopalakrishnan, S.

    2015-08-01

    Novel biphenyl-based photo-cross-linkable polymers were synthesized and characterized by nuclear magnetic resonance and Fourier transform infrared spectroscopy. Upon UV irradiation, the polymers were cross-linked even in the absence of photo initiator or sensitizers, and the rate of photo-cross-linking was examined and discussed. The effectiveness of both virgin and cross-linked polymers for corrosion resistance on mild steel in 1.0 M hydrochloric acid medium was investigated, using polarization studies, electrochemical impedance measurements as well as by adsorption isotherm and surface analysis. The results clearly indicated a dramatic increase in the efficiency of inhibition of corrosion on mild steel by the photo-cross-linked polymer as compared to virgin polymers.

  15. Experimental and theoretical investigations on the inhibition of mild steel corrosion in the ground water medium using newly synthesised bipodal and tripodal imidazole derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Gopi, D., E-mail: dhanaraj_gopi@yahoo.com [Department of Chemistry, Periyar University, Salem 636 011, Tamilnadu (India); Centre for Nanoscience and Nanotechnology, Periyar University, Salem 636 011, Tamilnadu (India); Sherif, El-Sayed M. [Center of Excellence for Research in Engineering Materials (CEREM), Advanced Manufacturing Institute, King Saud University, P.O. Box 800, Al-Riyadh 11421 (Saudi Arabia); Electrochemistry and Corrosion Laboratory, Department of Physical Chemistry, National Research Centre (NRC), Dokki, 12622 Cairo (Egypt); Surendiran, M. [Department of Chemistry, Periyar University, Salem 636 011, Tamilnadu (India); Jothi, M.; Kumaradhas, P. [Department of Physics, Periyar University, Salem 636 011, Tamilnadu (India); Kavitha, L. [Department of Physics, School of Basic and Applied Sciences, Central University of Tamilnadu, Thiruvarur 610 101, Tamilnadu (India)

    2014-10-15

    Two new imidazole derivatives, namely 1,4-bis(N-imidazolylmethyl)-2-5-dimethoxybenzene (BIDM) and 1,3,5-tris(N-imidazolylmethyl)-2,4,6-trimethoxybenzene (TITM), were synthesised and their effects on the inhibition of mild steel corrosion in ground water medium are reported. The study was carried out using gravimetric and electrochemical techniques in order to determine the corrosion inhibition efficiencies of the bipodal and tripodal structured imidazoles. Further, the quantum chemical calculations using density functional theory (DFT) gave a profound insight into the inhibitory action mechanism of BIDM and TITM and their calculation parameters, such as E{sub HOMO}, E{sub LUMO} and ΔE were in good agreement with the results of the experimental studies. BIDM and TITM exhibited lowest corrosion current densities of circa 7.5 μA cm{sup −2} and 4.1 μAcm{sup −2} at the optimum concentrations of 0.67 and 0.49 mM, respectively. All measurements thus confirmed that both BIDM and TITM behaved as good inhibitors for mild steel corrosion in ground water medium. - Highlights: • Synthesis of new imidazole derivatives-BIDM(bipodal) and TITM(tripodal) inhibitors. • Gravimetric analysis to investigate mild steel corrosion inhibition in ground water. • Electrochemical characterizations to substantiate results of weight loss method. • Quantum studies to analyse the chemical behavior, structure and substituent effect.

  16. Hydroxyl carboxylate based non-phosphorus corrosion inhibition process for reclaimed water pipeline and downstream recirculating cooling water system.

    Science.gov (United States)

    Wang, Jun; Wang, Dong; Hou, Deyin

    2016-01-01

    A combined process was developed to inhibit the corrosion both in the pipeline of reclaimed water supplies (PRWS) and in downstream recirculating cooling water systems (RCWS) using the reclaimed water as makeup. Hydroxyl carboxylate-based corrosion inhibitors (e.g., gluconate, citrate, tartrate) and zinc sulfate heptahydrate, which provided Zn(2+) as a synergistic corrosion inhibition additive, were added prior to the PRWS when the phosphate (which could be utilized as a corrosion inhibitor) content in the reclaimed water was below 1.7 mg/L, and no additional corrosion inhibitors were required for the downstream RCWS. Satisfactory corrosion inhibition was achieved even if the RCWS was operated under the condition of high numbers of concentration cycles. The corrosion inhibition requirement was also met by the appropriate combination of PO4(3-) and Zn(2+) when the phosphate content in the reclaimed water was more than 1.7 mg/L. The process integrated not only water reclamation and reuse, and the operation of a highly concentrated RCWS, but also the comprehensive utilization of phosphate in reclaimed water and the application of non-phosphorus corrosion inhibitors. The proposed process reduced the operating cost of the PRWS and the RCWS, and lowered the environmental hazard caused by the excessive discharge of phosphate. Furthermore, larger amounts of water resources could be conserved as a result.

  17. Investigations of the inhibition of copper corrosion in nitric acid solutions by ketene dithioacetal derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Fiala, A. [Laboratoire de chimie moleculaire du controle de l' environnement et des mesures physico-chimiques, faculte des sciences exactes, universite Mentouri-Constantine, route de Ain-El-Bey, Constantine (Algeria)], E-mail: abdelfiala@yahoo.fr; Chibani, A. [Laboratoire de chimie moleculaire du controle de l' environnement et des mesures physico-chimiques, faculte des sciences exactes, universite Mentouri-Constantine, route de Ain-El-Bey, Constantine (Algeria); Darchen, A. [Laboratoire d' electrochimie, ecole nationale superieure de chimie de Rennes, avenue du general-Leclerc, 35700 Rennes (France); Boulkamh, A.; Djebbar, K. [Laboratoire de chimie moleculaire du controle de l' environnement et des mesures physico-chimiques, faculte des sciences exactes, universite Mentouri-Constantine, route de Ain-El-Bey, Constantine (Algeria)

    2007-10-15

    Ketene dithioacetal derivatives, namely 3-[bis(methylthio)methylene] pentane-2,4-dione (1), 3-(1,3-dithian-2-ylidene) pentane-2,4-dione (2) and 3-(1,3-dithiolan-2-ylidene) pentane-2,4-dione (3) were synthesized and their respective capacity to inhibit copper corrosion in 3 M HNO{sub 3} was investigated by means of weight loss, potentiodynamic polarization, scanning electron microscopy (SEM) and energy dispersive X-ray fluorescence (XRF). The obtained results indicate that the addition of these compounds significantly decreases the corrosion rate. Potentiodynamic polarization studies clearly showed that the inhibition efficiency increases with increasing concentration of the investigated compounds at a fixed temperature, but decreases with increasing temperature. These results on the whole showed that the studied substances are good cathodic inhibitors for copper corrosion in nitric acid medium. SEM and energy dispersive X-ray (EDAX) examination of the copper surface revealed that these compounds prevented copper from corrosion by adsorption on its surface to form a protective film, which acts as a barrier to aggressive agents. The presence of these organic compounds adsorbed on the electrode surface was confirmed by XRF investigations.

  18. Effect of flow on corrosion in catenary risers and its corrosion inhibitor performance

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Pedro Altoe; Magalhaes, Alvaro Augusto Oliveira; Silva, Jussara de Mello [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Kang, Cheolho; More, Parimal P. [Det Norske Veritas (DNV), Oslo (Norway)

    2009-07-01

    In oil and gas production, multiphase flow is often encountered and a range of different flow patterns can be experienced in pipelines. The flow regime transition and flow characteristics can be changed with the change of pipeline topography, which affects the corrosion and the performance of corrosion inhibitor in these multiphase pipelines. This paper outlines on the effect of inclination on the flow characteristics and their subsequent effect on corrosion rates. Also, this paper presents on the performance of three candidate corrosion inhibitors under severe slugging conditions at low water cut. For the simulation of offshore flow lines and risers, the experiments were carried out in a 44 m long, 10 cm diameter, three different pipeline inclinations of 0, 3 and 45 degrees. Light condensate oil with a viscosity of 2.5 cP at room temperature was used and water cut was 20%. The results indicated that the baseline corrosion rate in 45 degrees showed higher than other inclinations. Each corrosion inhibitor showed a different inhibitor performance. (author)

  19. Microencapsulation Technology for Corrosion Mitigation by Smart Coatings

    Science.gov (United States)

    Buhrow, Jerry; Li, Wenyan; Jolley, Scott; Calle, Luz M.

    2011-01-01

    A multifunctional, smart coating for the autonomous control of corrosion is being developed based on micro-encapsulation technology. Corrosion indicators as well as corrosion inhibitors have been incorporated into microcapsules, blended into several paint systems, and tested for corrosion detection and protection effectiveness. This paper summarizes the development, optimization, and testing of microcapsules specifically designed to be incorporated into a smart coating that will deliver corrosion inhibitors to mitigate corrosion autonomously. Key words: smart coating, corrosion inhibition, microencapsulation, microcapsule, pH sensitive microcapsule, corrosion inhibitor, corrosion protection pain

  20. Effect of inhibitors and coatings on rebar corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Saricimen, H.; Ashiru, O.A.; Jarrah, N.R.; Quddus, A.; Shameem, M. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia). Research Inst.

    1997-12-01

    Chloride-induced corrosion of reinforcing steel is a major cause of deterioration of concrete structures in the eastern province of Saudi Arabia. Two of the practical ways of preventing or retarding corrosion of reinforcing steel bars in concrete are by using (a) inhibitor in concrete mix, and (b) coating either on the rebars or on external surfaces of concrete structures. The objective of this study has been to evaluate the effect of two inhibitors, three concrete coatings, and two barrier coatings on corrosion of reinforcing steel bars. Reinforced concrete specimens were monitored by AC and DC electrochemical techniques while undergoing free and accelerated corrosion. Accelerated corrosion tests were performed under 4V impressed anodic potential. Corrosion of the steel bars were evaluated by measuring anodic current, time-to-cracking of concrete specimens, and corrosion rates of the steel bars. The results showed that the specimens with the concrete surface coatings did not perform better than the control specimens. Time-to-cracking was shorter and corrosion rate of steel bars was higher in specimens coated with concrete coatings. The inhibitors and rebar surface coatings reduced the corrosion rate of steel bars significantly and improved the time-to-cracking of the specimens in comparison to control specimens.

  1. Modeling corrosion inhibition efficacy of small organic molecules as non-toxic chromate alternatives using comparative molecular surface analysis (CoMSA).

    Science.gov (United States)

    Fernandez, Michael; Breedon, Michael; Cole, Ivan S; Barnard, Amanda S

    2016-10-01

    Traditionally many structural alloys are protected by primer coatings loaded with corrosion inhibiting additives. Strontium Chromate (or other chromates) have been shown to be extremely effectively inhibitors, and find extensive use in protective primer formulations. Unfortunately, hexavalent chromium which imbues these coatings with their corrosion inhibiting properties is also highly toxic, and their use is being increasingly restricted by legislation. In this work we explore a novel tridimensional Quantitative-Structure Property Relationship (3D-QSPR) approach, comparative molecular surface analysis (CoMSA), which was developed to recognize "high-performing" corrosion inhibitor candidates from the distributions of electronegativity, polarizability and van der Waals volume on the molecular surfaces of 28 small organic molecules. Multivariate statistical analysis identified five prototypes molecules, which are capable of explaining 71% of the variance within the inhibitor data set; whilst a further five molecules were also identified as archetypes, describing 75% of data variance. All active corrosion inhibitors, at a 80% threshold, were successfully recognized by the CoMSA model with adequate specificity and precision higher than 70% and 60%, respectively. The model was also capable of identifying structural patterns, that revealed reasonable starting points for where structural changes may augment corrosion inhibition efficacy. The presented methodology can be applied to other functional molecules and extended to cover structure-activity studies in a diverse range of areas such as drug design and novel material discovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Inhibition of Ce3+ on Stress Corrosion Crack of High Strength Aluminum Alloy

    Directory of Open Access Journals (Sweden)

    LI Wen-ting

    2017-05-01

    Full Text Available The stress corrosion cracking (SCC susceptibility of 7A04 high strength aluminum alloy in 3.5% (mass fraction NaCl solution and the Ce3+ inhibition of SCC were investigated by slow stress rate test(SSRT, using constant current polarization, electrochemical noise (ECN and electrochemical impedance spectroscopy (EIS techniques. The inhibition mechanism of Ce3+ ions on the initiation and propagation of cracking was also analyzed. The results indicate that both anodic and cathodic galvanostatic polarizations can accelerate the SCC of 7A04, the former increases anodic dissolution but the latter accelerates hydrogen embrittlement of crack tip. SCC susceptibility of 7A04 can be reduced effectively by the addition of cerium ions, the fracture time is delayed and slowed down, but only during the initiation other than the propagation stage of cracking. Ce3+ ions can restrain the initiation of metastable pitting on the surface of 7A04 specimen, which therefore increase the induction time of the cracking since that the micro pits are usually the source of cracking.However, once the crack begins to propagate or the specimen is notched, the addition of cerium ions can rarely inhibit the cracking process. This is possibly attributed to that the radius of Ce3+ ion is too large to diffuse into the crack tip or it is hard to form protective CeO2 layer, Ce3+ ion therefore fails to rehabilitate the active alloy at the crack tip and further reduce the SCC developing rate of 7A04. SEM also indicates that the crack initiation of smooth 7A04 specimens is mainly induced by metastable or stable pits.

  3. Inhibition of Corrosion of Carbon Steel in 3.5% NaCl Solution by Myrmecodia Pendans Extract

    Directory of Open Access Journals (Sweden)

    Atria Pradityana

    2016-01-01

    Full Text Available Inhibitor is a substance that is added to the corrosive media to inhibit corrosion rate. Organic inhibitors are preferred to inorganic ones since they are environmentally friendly. One of the organic compounds which is rarely reported as a corrosion inhibitor is Myrmecodia Pendans. The organic compounds can be adsorbed on the metal surface and block the active surface to reduce the rate of corrosion. In this study, the used pipe was carbon steel API 5L Grade B with 3.5% NaCl solution as the corrosion medium. The objective of this research was to analyze the inhibition mechanism Myrmecodia Pendans towards carbon steel in a corrosion medium. Concentration variations of extract Myrmecodia Pendans were 0–500 ppm. Fourier Transform Infrared (FTIR was used for chemical characterization of Myrmecodia Pendans. Polarization and Electrochemical Impedance Spectroscopy (EIS were used to measure the corrosion rate and behaviour. From the electrochemical measurements, it was found that the addition of 400 mg/L inhibitor gave the highest inhibition efficiency. Myrmecodia Pendans acted as a corrosion inhibitor by forming a thin layer on the metal surface.

  4. Effect of Tryptophan on the corrosion behavior of low alloy steel in sulfamic acid

    OpenAIRE

    Hesham T.M. Abdel-Fatah; Salah A.M. Rashwan; S.M. Abd El Wahaab; Aliaa A.M. Hassan

    2016-01-01

    Sulfamic acid is widely used in various industrial acid cleaning applications. In the present work, the inhibition effect of Tryptophan (Tryp) on the corrosion of low alloy steel in sulfamic acid solutions at four different temperatures was studied. The investigations involved electrochemical methods (electrochemical impedance spectroscopy; EIS and the new technique electrochemical frequency modulation; EFM) as well as gravimetric measurements. The inhibition efficiency and the apparent activ...

  5. Laccase Immobilized on Mesoporous Silica Materials and Its Corrosion Inhibition Performance in Circulating Cooling Water System

    Institute of Scientific and Technical Information of China (English)

    Liu Fang; Lü Yucui; Zhong Huiyun; Zhang Shuang; Fan Fengtao; Zhao Chaocheng

    2015-01-01

    Mesoporous SiO2 microspheres were synthesized using the sol-gel method and were characterized byTEM, FT-IR and BET techniques. The diameter of the microspheres is about 100—150 nm, and the average mesopore di-ameter is 2.55 nm, while the speciifc surface area is 1 088.9 m2/g. Mesoporous SiO2 microspheres adsorb glutaraldehyde and immobilize laccase by means of the aldehyde group in glutaral which can react with the amidogen of laccase. The im-mobilization conditions were optimized at a glutaraldehyde concentration of 0.75%, a crosslinking time of 8 h, a laccase concentration of 0.04 L/L and an immobilization time of 10 h. When diesel leakage concentration was 80 mg/L, the highest corrosion inhibition efifciency of immobilized laccase reached 49.23%, which was slightly lower than the corrosion inhibi-tion efifciency of free laccase (59%). The diesel degradation ratio could reach up to 45%. It has been proved that the immo-bilized laccase could degrade diesel to inhibit corrosion.

  6. Corrosion Inhibition Study of Mild Steel in Acidic Medium by Antibiotic Drugs: A Comparative Study

    Directory of Open Access Journals (Sweden)

    Md. A. Aziz

    2014-04-01

    Full Text Available A comparison of the inhibiting efficiency of antibiotic drugs (ciprofloxacin, cloxacillin, and amoxicillin on the corrosion of mild steel in 1 mol·L−1 HCl were studied at room temperature using mass loss measurement. The main reason is probably be due to the formation of protective coverage by the inhibitor as other authors reported previously. Adsorption characteristics of the inhibitor has also been studied using simple equation and it was found that drugs inhibits the corrosion of mild steel by being adsorbed on the surface of mild steel by a physical adsorption mechanism. The adsorption of drugs on the mild steel surface was found to be spontaneous and obey the Langmuir adsorption isotherm model. It was observed that the test drug has a promising inhibitory action in acid medium against corrosion of mild steel. Moreover it was revealed that an inhibition efficiency of 80.1 % can be achieved with 3×10-3M ciprofloxacin drug treatment on mild steel.

  7. Corrosion inhibition of iron in 0.5 mol L-1 H2SO4 by halide ions

    Directory of Open Access Journals (Sweden)

    Jeyaprabha C.

    2006-01-01

    Full Text Available The inhibition effect of halide ions such as iodide, bromide and chloride ions on the corrosion of iron in 0.5 mol L-1 H2SO4 and the adsorption behaviour of these ions on the electrode surface have been studied by polarization and impedance methods. It has been found that the inhibition of nearly 90% has been observed for iodide ions at 2.5 10-3 mol L-1, for bromide ions at 10 10-3 mol L-1 and 80% for chloride ions at 2.5 10-3 mol L-1. The inhibition effect is increased with increase of halide ions concentration in the case of I- and Br- ions, whereas it has decreased in the case of Cl- ion at concentrations higher than 5 10-3 mol L-1. The double layer capacitance values have decreased considerably in the presence of halide ions which indicate that these anions are adsorbed on iron at the corrosion potential.

  8. Corrosion Inhibitors for Aluminum.

    Science.gov (United States)

    Muller, Bodo

    1995-01-01

    Describes a simple and reliable test method used to investigate the corrosion-inhibiting effects of various chelating agents on aluminum pigments in aqueous alkaline media. The experiments that are presented require no complicated or expensive electronic equipment. (DDR)

  9. 稀土离子和香兰素在H2SO4溶液中对冷轧钢的缓蚀协同效应%Synergistic Inhibition Effect of Rare Earth Ions and Vanillin on Corrosion of Cold Rolled Steel in H2SO4 Solution

    Institute of Scientific and Technical Information of China (English)

    李向红; 邓书端; 付惠; 木冠南

    2009-01-01

    用失重法研究了四种稀土离子(La3+,Ce3+,Ce4+,Nd3+)和香兰素(4-羟基-3-甲氧基-苯甲醛)在1.0 mol/LH2SO4介质中对冷轧钢的缓蚀协同效应.结果表明,香兰素对冷轧钢有中等程度的缓蚀作用,缓蚀率随其浓度的增加而增大;四种稀土离子对冷轧钢的缓蚀作用均较差,最大缓蚀率仅为20%左右.香兰素和稀土Ce4+复配后对冷轧钢产生了明显的缓蚀协同效应,最大缓蚀率可达95%左右;而与La3+,Ce3+和Nd3+复配后均无缓蚀协同效应.%The synergistic inhibition effect of four rare earth ions (La3+, Ce3+, Ce4+, Nd3+) and vanillin (4-hydroxy-3-methoxy-benzaldehyde) on the corrosion of cold rolled steel (CRS) in 1.0 mol/L H2SO4 solution was studied by weight loss method. The present study revealed that vanillin had a moderate inhibitive effect on the corrosion of CRS in 1.0 mol/L H2SO4 solution, and the inhibition efficiency increased with the concentration. The rare earth ions of La3+,Ce3+,Ce4+ and Nd3+ had a negligible effect in 1.0 mol/L H2SO4, and the maximum inhibition efficiency was not more than 20%. The experiments of incorporation of rare earth ions and vanillin, indicated that Ce4+ and vanillin produced strong synergistic effect on corrosion inhibition for CRS, and the maximum inhibition efficiency was about 95%. However, there was no synergistic inhibition effect between other rare earth ions (La3+, Ce3+ and Nd3+) and vanillin.

  10. Effect of Tryptophan on the corrosion behavior of low alloy steel in sulfamic acid

    Directory of Open Access Journals (Sweden)

    Hesham T.M. Abdel-Fatah

    2016-11-01

    Full Text Available Sulfamic acid is widely used in various industrial acid cleaning applications. In the present work, the inhibition effect of Tryptophan (Tryp on the corrosion of low alloy steel in sulfamic acid solutions at four different temperatures was studied. The investigations involved electrochemical methods (electrochemical impedance spectroscopy; EIS and the new technique electrochemical frequency modulation; EFM as well as gravimetric measurements. The inhibition efficiency and the apparent activation energy have been calculated in the presence and in the absence of Tryp. It is most probable that the inhibition property of Tryp was due to the electrostatic adsorption of the protonated form of Tryp on the steel surface. Adsorption of the inhibitor molecule, onto the steel surface followed the Temkin adsorption isotherm. The thermodynamic parameters of adsorption were determined and discussed. All of the obtained data from the three techniques were in close agreement, which confirmed that EFM technique can be used efficiently for monitoring the corrosion inhibition under the studied conditions.

  11. Corrosion inhibition of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Geetha Mable [Department of Chemistry, National Institute of Technology Karnataka, Surathkal, Srinivasnagar 575 025, Mangalore, Karnataka (India); Nayak, Jagannath [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Srinivasnagar 575 025, Karnataka (India); Shetty, A. Nityananda, E-mail: nityashreya@gmail.com [Department of Chemistry, National Institute of Technology Karnataka, Surathkal, Srinivasnagar 575 025, Mangalore, Karnataka (India)

    2011-02-15

    Research highlights: {yields} Corrosion inhibition of Al-SiC composite. {yields} DMABT as corrosion inhibitor. {yields} Inhibition through physisorption of DMABT. - Abstract: The corrosion inhibition characteristics of 4-(N,N-dimethylamino) benzaldehyde thiosemicarbazone (DMABT) on the corrosion behavior of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy were studied at different temperatures in acid mixture medium containing varying concentrations of hydrochloric acid and sulphuric acid using Tafel extrapolation technique and ac impedance spectroscopy (EIS). The effect of inhibitor concentration, temperature and concentration of the acid mixture media on the inhibitor action was investigated. It was found that inhibition efficiencies increase with the increase in inhibitor concentration, but decrease with the increase in temperature and with the increase in concentration of the acid media. Thermodynamic parameters for dissolution process were determined. The adsorption of DMABT on both the composite and base alloy was found to be through physisorption obeying Freundlich adsorption isotherm.

  12. Note: Inhibiting bottleneck corrosion in electrical calcium tests for ultra-barrier measurements

    Energy Technology Data Exchange (ETDEWEB)

    Nehm, F., E-mail: frederik.nehm@iapp.de; Müller-Meskamp, L.; Klumbies, H.; Leo, K. [Institut für Angewandte Photophysik, Technische Universität Dresden, George-Bähr-Straße 1, 01069 Dresden (Germany)

    2015-12-15

    A major failure mechanism is identified in electrical calcium corrosion tests for quality assessment of high-end application moisture barriers. Accelerated calcium corrosion is found at the calcium/electrode junction, leading to an electrical bottleneck. This causes test failure not related to overall calcium loss. The likely cause is a difference in electrochemical potential between the aluminum electrodes and the calcium sensor, resulting in a corrosion element. As a solution, a thin, full-area copper layer is introduced below the calcium, shifting the corrosion element to the calcium/copper junction and inhibiting bottleneck degradation. Using the copper layer improves the level of sensitivity for the water vapor transmission rate (WVTR) by over one order of magnitude. Thin-film encapsulated samples with 20 nm of atomic layer deposited alumina barriers this way exhibit WVTRs of 6 × 10{sup −5} g(H{sub 2}O)/m{sup 2}/d at 38 °C, 90% relative humidity.

  13. 硫酸介质中榕树叶提取液的缓蚀性能及其与KI的缓蚀协同效应%Corrosion Inhibition of Ficus Microcarpa Leaves Extract and Its Synergistic Effect with KI in Sulfuric Acid

    Institute of Scientific and Technical Information of China (English)

    卢燕; 郑兴文; 刘新露; 曾凤春

    2013-01-01

    通过电化学方法和失重法,研究了榕树叶提取液(FLE)对碳钢在硫酸溶液中的缓蚀性能,同时研究了它与KI的缓蚀协同效应,探讨了缓蚀机理.研究结果表明:在硫酸溶液中,FLE对碳钢属混合抑制型缓蚀剂,缓蚀效率随其浓度的增加而增大;FLE与KI之间存在良好的协同效应,两者复配后,体系的腐蚀电流密度减小,电荷传递电阻增大,双电层电容减小,缓蚀效率增大,表现出更好的缓蚀作用;FLE与KI复配前后,其在碳钢表面的吸附均为自发过程,且符合Langmuir吸附等温方程.%Through electrochemical methods and weight loss measurement,the corrosion inhibition of ficus microcarpa leaves extract (FLE) for carbon steel in sulfuric acid solutions was studied,and the synergistic effect between FLE and KI was investigated,furthermore the inhibition mechanism of FLE was discussed.The results showed that FLE was a mixed-type inhibitor for carbon steel,and the inhibition efficiency of FLE for carbon steel increased with increase of the concentration of FLE.There existed significant synergistic effect between FLE and KI,which made the mixture of FLE and KI was used as corrosion inhibitor,the corrosion current density and double layer capacitance decreased,the charge transfer resistance increased,consequently showed better corrosion inhibition and higher inhibition efficiency.The adsorption of FLE with the presence and absence of KI on the carbon steel surface was a spontaneous process,and obeyed Langmuir adsorption isotherm model.

  14. Adsorption of alginate and albumin on aluminum coatings inhibits adhesion of Escherichia coli and enhances the anti-corrosion performances of the coatings

    Energy Technology Data Exchange (ETDEWEB)

    He, Xiaoyan; Liu, Yi; Huang, Jing; Chen, Xiuyong; Ren, Kun; Li, Hua, E-mail: lihua@nimte.ac.cn

    2015-03-30

    Graphical abstract: - Highlights: • Adsorption behaviors of alginate and albumin on Al coatings were investigated at molecular level. • The adsorption inhibits effectively the colonization of Escherichia coli bacteria. • The adsorption alters the wettability of the Al coatings. • The conditioning layer enhances anti-corrosion performances of the Al coatings. - Abstract: Thermal-sprayed aluminum coatings have been extensively used as protective layers against corrosion for steel structures in the marine environment. The corrosion usually deteriorates from marine biofouling, yet the mechanism of accelerated corrosion of the coatings remains elusive. As the first stage participating in biofouling process, adsorption of molecules plays critical roles in mediating formation of biofilm. Here, we report at molecular level the adsorption behaviors of albumin and marine polysaccharide on arc-sprayed aluminum coatings and their influence on adhesion of Escherichia coli. The adsorption of alginate and albumin was characterized by infrared spectra analyses and atomic force microscopic observation. The adsorption inhibits effectively adhesion of the bacteria. Further investigation indicates that alginate/albumin altered the hydrophilicity/hydrophobicity of the coatings instead of impacting the survival of the bacteria to decline their adhesion. The conditioning layer composed of the molecules enhances anti-corrosion performances of the coatings.

  15. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid.

    Science.gov (United States)

    Al-Amiery, Ahmed A; Binti Kassim, Fatin A; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2016-01-22

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10(-3) M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir's adsorption isotherm. The effect of te perature on corrosion behavior in the presence of 5 × 10(-3) M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.

  16. Experimental and theoretical investigation on corrosion inhibition of AA5052 aluminium alloy by L-cysteine in alkaline solution

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dapeng; Gao, Lixin [School of Environmental and Chemical Engineering, Shanghai University of Electric Power, Shanghai 200090 (China); Zhang, Daquan, E-mail: zhangdaquan@shiep.edu.cn [School of Environmental and Chemical Engineering, Shanghai University of Electric Power, Shanghai 200090 (China); Yang, Dong [School of Environmental and Chemical Engineering, Shanghai University of Electric Power, Shanghai 200090 (China); Wang, Hongxia; Lin, Tong [Institute for Frontier Materials, Deakin University, Geelong, VIC 3216 (Australia)

    2016-02-01

    The corrosion inhibition of L-cysteine on AA5052 aluminium alloy in 4 mol/L NaOH solution was investigated by hydrogen gas evolution experiment, polarisation curve, galvanostatic discharge, electrochemical impedance spectroscopy measurements and quantum chemical calculations. The adsorption of L-cysteine on aluminium alloy surface obeyed the amended Langmuir's adsorption isotherm. The polarisation curves indicated that L-cysteine acted as a cathodic inhibitor to inhibit cathodic reaction. The inhibition mechanism was dominated by the geometric covering effect. The galvanostatic discharge shows that the additives restrain the hydrogen evolution and increase the anodic utilization rate. Quantum chemical calculations indicated that L-cysteine molecules mainly interacted with on the carboxyl groups on the aluminium alloy surface. A strong hybridization occurred between the s-orbital and p-orbital of reactive sites in the L-cysteine molecule and the sp-orbital of Aluminium. - Highlights: • L-cysteine was used as corrosion inhibitor for Al alloy in alkaline solution. • Adsorption of L-cysteine on Al alloy surface obeyed the amended Langmuir's isotherm. • L-cysteine molecules interacted with the carboxyl groups on the Al alloy surface. • A strong orbital hybridization occurred between the reactive sites in L-cysteine and Al.

  17. Kinetics of Corrosion Inhibition of Aluminum in Acidic Media by Water-Soluble Natural Polymeric Pectates as Anionic Polyelectrolyte Inhibitors

    Directory of Open Access Journals (Sweden)

    Refat M. Hassan

    2013-06-01

    Full Text Available Corrosion inhibition of aluminum (Al in hydrochloric acid by anionic polyeletrolyte pectates (PEC as a water-soluble natural polymer polysaccharide has been studied using both gasometric and weight loss techniques. The results drawn from these two techniques are comparable and exhibit negligible differences. The inhibition efficiency was found to increase with increasing inhibitor concentration and decrease with increasing temperature. The inhibition action of PEC on Al metal surface was found to obey the Freundlich isotherm. Factors such as the concentration and geometrical structure of the inhibitor, concentration of the corrosive medium, and temperature affecting the corrosion rates were examined. The kinetic parameters were evaluated and a suitable corrosion mechanism consistent with the kinetic results is discussed in the paper.

  18. Superhydrophobic and superoleophobic surface by electrodeposition on magnesium alloy substrate: Wettability and corrosion inhibition.

    Science.gov (United States)

    Liu, Yan; Li, Shuyi; Wang, Yaming; Wang, Huiyuan; Gao, Ke; Han, Zhiwu; Ren, Luquan

    2016-09-15

    Superamphiphobic (both superhydrophobic and superoleophobic) surfaces have attracted great interests in the fundamental research and practical application. This research successfully fabricated the superamphiphobic surfaces by combining the nickel plating process and modification with perfluorocaprylic acid. The cooperation of hierarchical micro-nano structures and perfluorocaprylic acid with low surface energy plays an important role in the formation of superamphiphobic surfaces. The contact angles of water/oil have reached up to 160.2±1°/152.4±1°, respectively. Contrast with bare substrate, the electrochemical measurements of superamphiphobic surfaces, not only the EIS measurement, but also potentiodynamic polarization curves, all revealed that, the surface corrosion inhibition was improved significantly. Moreover, superamphiphobic surfaces exhibited superior stability in the solutions with a large pH range, also could maintain excellent performance after storing for a long time in the air. This method is easy, feasible and effective, and could be used to fabricate large-area mutli-functional surface. Such a technique will develop a new approach to fabricate superamphiphobic surfaces on different engineering materials.

  19. Study on Surface Adsorption and Inhibition Behavior of Corrosion Inhibitors Contained in Copper Foil Rolling Oil

    Institute of Scientific and Technical Information of China (English)

    Xiong Sang; Sun Jianlin; Jiang Wei; Xu Yang; Zeng Yingfeng; Xia Lei

    2015-01-01

    Adsorption and inhibition behavior of 2,5-bis(ethyldisulfanyl)-1,3,4-thiadiazole (DMTDA) andN-((6-methyl-1H -benzo[d][1,2,3]triazol-1-yl)methyl)-N-octyloctan-1-amine (EAMBA) as corrosion inhibitors contained in copper foil roll-ing oil have been investigated using gravimetric and electrochemical techniques. Meanwhile, scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS) have been employed to observe the surface topography and analyze the components on copper foil. The results show that the rolling oil containing DMTDA and EAMBA can signiifcantly decrease the dissolution rate and increase the inhibition efifciency of samples, especially in the case of best compounded rolling oil system. The SEM and EDS investigations also conifrmed that the protection of the copper foil surface is achieved by strong adsorption of the molecules which can prevent copper from being corroded easily. Reactivity descriptors of the corrosion inhibitors have been calculated by the density functional theory (DFT) and the reactivity has been analyzed through the molecular orbital and Fukui indices. Active sites of inhibitor are mainly concentrated on the ring and the polar functional groups, and in the meanwhile, the distribution is helpful to form coordination and backbonding among molecules and then to form stable adsorption on the metal surface. And this work provides theoretical evidence for the selection of corrosion inhibitors contained in copper foil rolling oil.

  20. Effect of Drag Reducing Polymer and Suspended Solid on the Rate of Diffusion Controlled Corrosion in 90° Copper Elbow

    Science.gov (United States)

    Fouad, Mohamed Ahmed; Zewail, Taghreed Mohamed; Amine, Nieven Kamal Abbes

    2016-06-01

    Rate of diffusion controlled corrosion in 90° Copper Elbow acidified dichromate has been investigated in relation to the following parameters: effect of solution velocity in the absence and presence of drag- reducing polymer on the rate of diffusion controlled corrosion, and effect of the presence of suspended solids on the rate of diffusion controlled corrosion. It was found that the presence of drag reducing polymer inhibited the rate of mass transfer, while the presence of suspended solid increased significantly the rate of mass transfer.

  1. A Multifunctional Coating for Autonomous Corrosion Control

    Science.gov (United States)

    Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Jolley, Scott t.

    2011-01-01

    Nearly all metals and their alloys are subject to corrosion that causes them to lose their structural integrity or other critical functionality. Protective coatings are the most commonly used method of corrosion control. However, progressively stricter environmental regulations have resulted in the ban of many commercially available corrosion protective coatings due to the harmful effects of their solvents or corrosion inhibitors. This work concerns the development of a multifunctional smart coating for the autonomous control of corrosion. This coating is being developed to have the inherent ability to detect the chemical changes associated with the onset of corrosion and respond autonomously to indicate it and control it. The multi-functionality of the coating is based on microencapsulation technology specifically designed for corrosion control applications. This design has, in addition to all the advantages of existing microcapsulation designs, the corrosion controlled release function that triggers the delivery of corrosion indicators and inhibitors on demand, only when and where needed. Microencapsulation of self-healing agents for autonomous repair of mechanical damage to the coating is also being pursued. Corrosion indicators, corrosion inhibitors, as well as self-healing agents, have been encapsulated and dispersed into several paint systems to test the corrosion detection, inhibition, and self-healing properties of the coating. Key words: Corrosion, coating, autonomous corrosion control, corrosion indication, corrosion inhibition, self-healing coating, smart coating, multifunctional coating, microencapsulation.

  2. Estudo comparativo da eficiência da difenilcarbazida e do óleo de coco saponificado microemulsionados na inibição da corrosão de aço carbono Comparative effectiveness microemulsions of diphenylcarbazide and saponified coconut oil in the carbon steel corrosion inhibition process

    Directory of Open Access Journals (Sweden)

    Cátia G. F. T. Rossi

    2007-10-01

    Full Text Available The effectiveness of microemulsions (ME of saponified coconut oil (OCS-ME and diphenylcarbazide (DC-ME on a carbon steel corrosion inhibition process was evaluated using an electrochemical method of polarization resistance. The ME was prepared with OCS, butanol, kerosene and saline solutions. OCS-ME and DC-ME showed highest inhibitions effects (77% and 92%, respectively at lower concentrations (0.5% and 0.48 - 0.50%, respectively. The surfactant OCS (in H2O showed lower efficiency (63% at 0.20 - 0.25% concentration. The greatest inhibitory effect of DC-ME could be correlated with the chemical structure and the rich O/W ME system, which are very important for adsorption phenomena in interfacial ME systems.

  3. Towards lightweight nanocomposite coatings for corrosion inhibition: Graphene, carbon nanotubes, and nanostructured magnesium as case studies

    Science.gov (United States)

    Dennis, Robert Vincent, III

    The field of nanocomposites is a burgeoning area of research due to the interest in the remarkable properties which can be achieved through their use in a variety of applications, including corrosion resistant coatings. Lightweighting is of increasing importance in the world today due to the ever growing push towards energy efficiency and the green movement and in recent years there has been a vast amount of research performed in the area of developing lightweight nanocomposites for corrosion inhibition. Many new composite materials have been developed through the use of newly developed nanomaterials (including carbonaceous and metallic constituents) and their specialized incorporation in the coating matrix materials. We start with a general review on the development of hybrid nanostructured composites for corrosion protection of base metals from a sustainability perspective in Chapter 1. This review demonstrates the ever swelling requirements for a paradigm shift in the way that we protect metals against corrosion due to the costs and environmental concerns that exist with currently used technology. In Chapter 2, we delve into the much required understanding of graphene oxide and reduced graphene oxide through near-edge X-ray absorption fine structure (NEXAFS) spectroscopy measurements to elucidate information about the electronic structure upon incorporation of nitrogen within the structure. For successful integration of the carbonaceous nanomaterials into a composite coating, a full swath of knowledge is necessary. Within this work we have shown that upon chemical defunctionalization of graphene oxide to reduced graphene oxide by means of hydrazine treatment, nitrogen is incorporated into the structure in the form of a pyrazole ring. In Chapter 3, we demonstrate that by way of in situ polymerization, graphene and multiwalled carbon nanotubes can be incorporated within a polymer (polyetherimide, PEI) matrix. Two systems have been developed including graphene and

  4. Infrared-visible sum frequency generation investigation of Cu corrosion inhibition with benzotriazole.

    Science.gov (United States)

    Schultz, Zachary D; Biggin, Mary Ellen; White, Jeffrey O; Gewirth, Andrew A

    2004-02-01

    Infrared-visible sum frequency generation spectroscopy is used to investigate the corrosion inhibitor benzotriazole (BTAH) adsorbed on Cu(100) and Cu(111) in acidic solution. Potential-dependent in situ spectra indicate that the adsorbed molecule is the benzotriazole anion (BTA-) at all potentials investigated. The Cu(100) surface is shown to form an ordered adlayer at all potentials probed, while the Cu(111) face is shown to be disordered at negative potentials, but to order with applied positive potential. The ordered adlayer is shown to consist of the BTA- in two configurations, one coordinated to the surface and Cu+ ions in solution and the other coordinated only to the surface. The BTA- coordinated to Cu+ is shown to be more stable with respect to Cl- addition than BTA- coordinated to only the surface. This study demonstrates the viability of using sum frequency generation to study corrosion inhibition in situ.

  5. Corrosion inhibition of cobalt with a thin film of Cu-BTA

    Energy Technology Data Exchange (ETDEWEB)

    Brusic, V.; Frankel, G.S.; Schrott, A.G.; Petersen, T.A. (Thomas J. Watson Research Center, Yorktown Heights, NY (United States). IBM Research Division); Rush, B.M. (Univ. of California, Berkeley, CA (United States). Dept. of Chemical Engineering)

    1993-09-01

    Electrochemical techniques, ellipsometry and X-ray photoelectron spectroscopy were used to evaluate the use of benzotriazole, alone or in combination with boric acid/borate buffer and dilute copper sulfate for the protection of cobalt. The data indicate that in slightly alkaline solutions benzotriazole is a strong inhibitor for cobalt corrosion, whereas in water and neutral solutions it produces a barely measurable effect. In the presence of benzotriazole and Cu[sup +2] ions, spontaneous reduction of copper ions leads to the formation of a thin film of Cu-BTA on the cobalt surface. This film acts as a corrosion protector that is better than benzotriazole, with a significant reduction of the corrosion rate even during subsequent exposure to solutions without inhibitors.

  6. Principles of inhibiting of corrosion-static crack growth in constructional steels caused by hydrogen embrittlement

    Energy Technology Data Exchange (ETDEWEB)

    Romaniv, O.N.; Nikiforchin, G.N.; Tsirul' nik, A.T.

    1987-11-01

    The effectiveness of a range of organic and inorganic corrosion inhibitors was studied on a series of structural chromium steels--including 45KhN2MFA, 60KhS, and 30KhGSN2A--of different strength levels and certain principles are formulated for developing and selecting inhibitors based on the hydrogen mechanism of corrosive media. The inhibitors tested include monoethanol amine, urotropin, sodium benzoate, thiourea, sodium phosphates and chromates, various nitrates, and the IRT range of inhibitors.

  7. Effect of Chemical Passivation Treatment and Flow on the Corrosion of 304 Stainless Steel in Hydrochloric Acid Solution

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Jie; Cheng, Cong Qian; Cao, Tie Shan [Dalian University of Technology, Dalian (China)

    2015-12-15

    Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

  8. Inhibiting Corrosion Cracking: Crack Tip Chemistry and Physics.

    Science.gov (United States)

    1986-03-14

    5 5. Swuzary 113 Rferences 114 wl NO 4L iv . List of Figuring 1. Microipette pulling machine . 29 2. Anodic polarization of 7075-T6 Al alloy in dilute...environment has a strong effect on microplastic behavior at the tip of a fatigue crack. Stolz and Pelloux suggest that nitrate ion competes with chloride...Crystalline Na2 N 20 29H20 precipitates when the filtrate is placed in a vacunm desiccator over sulfuric acid. The filtered precipitate is washed

  9. Corrosion inhibition capacity of non-phosphorus corrosion inhibitor in water with moderate alkalinity and moderate hardness for A3 carbon steel%无磷缓蚀剂在中碱中硬水质中对A3碳钢的缓蚀性能

    Institute of Scientific and Technical Information of China (English)

    王超; 李颜云; 陶蕾; 秦立娟; 王昊

    2015-01-01

    开发了一种酰胺类无磷缓蚀剂,在中碱度中硬度水质中进行了缓蚀应用研究。选用A3碳钢作为测试对象,采用旋转挂片失重法和电化学阻抗法对酰胺类无磷缓蚀剂的缓蚀性能进行研究。测试结果表明,该酰胺类无磷缓蚀剂在中碱度中硬度的循环水水质下具有良好的缓蚀性能,能够有效地满足循环水系统的金属缓蚀需求。%A kind of amide derivative non-phosphorus corrosion inhibitor has been synthesized. Its application to corrosion inhibition in water with moderate alkalinity and moderate hardness is studied. Using carbon steel A3 as de-tection target,the corrosion inhibiting capacity of amide derivative non-phosphorus corrosion inhibitor by rotary coupon weight-loss method and electrochemical impedance method is studied. The results indicate that the amide derivative non-phosphorus corrosion inhibitor has good corrosion inhibiting capacity in circulating water with moder-ate alkalinity and moderately hardness ,being able to effectively meet the metal corrosion inhibition requirements for circulating water systems.

  10. The Effect of Inhibitors on the Susceptibility of Al 6013/SiC Interface to Localized Corrosion

    Science.gov (United States)

    Ahmad, Zaki; Aleem, B. J. Abdul

    2009-03-01

    Al 6013-20 SiC (p) in tempers T4, O, and F is sensitive to localized corrosion in 3.5 wt.% NaCl because of the preponderance of the secondary phase particles of Cu, Fe, and Cr at the Al/SiC interface. Treatment with cerium chloride effectively inhibited the localized corrosion of the alloy by suppressing the cathodic reactions at Al 6013/SiC interface as shown by electrochemical investigations. Morphological studies showed the formation of a protective cerium oxide/hydroxide films, which suppresses the corrosion of the alloy.

  11. ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY STUDY OF CORROSION INHIBITION OF MODIFIED LIGNOSULPHONATE FOR CARBON STEEL

    Institute of Scientific and Technical Information of China (English)

    C.H. Yi; X.Q. Qiu; D.J. Yang; H.M. Lou

    2005-01-01

    The corrosion inhibition for carbon steel in circulating cooling water by modified lignosulphonate has been investigated using electrochemical impedance spectroscopy technique. Results show that the inhibition efficiency of modified lignosulphonate GCL2 is a great improvement on that of lignosulphonate. The maximum inhibition efficiency of GCL2 reaches 99.21% at forming adsorption film on the metal surface for the electrochemical impedance spectroscopy in GCL2 solution shows more than one time-constant. Moreover, results also indicate that it is more efficient in stirring solution than in still solution for GCL2 because the constant of adsorption in stirring solution is much larger than that in still solution. The adsorption of inhibitor GCL2 follows Langmuir's adsorption isotherm.

  12. Experimental and theoretical study for corrosion inhibition of mild steel in normal hydrochloric acid solution by some new macrocyclic polyether compounds

    Energy Technology Data Exchange (ETDEWEB)

    Lebrini, M. [Unite de Catalyse et de Chimie du Solide, CNRS UMR 8181, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Lagrenee, M. [Unite de Catalyse et de Chimie du Solide, CNRS UMR 8181, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, H. [Laboratoire de Chimie Organique et Macromoleculaire, CNRS UMR 8009, USTL Bat C4, F-59655 Villeneuve d' Ascq Cedex (France); Traisnel, M. [Laboratoire des Procedes d' Elaboration des Revetements Fonctionnels, PERF UMR 8008, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Bentiss, F. [Laboratoire de Chimie de Coordination et d' Analytique, Faculte des Sciences, Universite Chouaib Doukkali, BP 20, M-24000 El Jadida (Morocco)]. E-mail: f.bentiss@pop.ensc-lille.fr

    2007-05-15

    New macrocyclic polyether compounds containing a 1,3,4-thiadiazole moiety have been prepared to study the corrosion inhibitive effect of mild steel in normal hydrochloric acid solutions. The salient features obtained from weight loss and electrochemical impedance spectroscopy (EIS) have been discussed. The results of these investigations have shown enhancement in inhibition efficiencies with the extent of the polyethylene glycol unit that forms a cavity. Data obtained from EIS show a frequency distribution and therefore a modelling element with frequency dispersion behaviour, a constant phase element (CPE) has been used. Display Omitted Adsorption of n-MCTH was found to follow the Langmuir's adsorption isotherm. The thermodynamic functions of adsorption process were calculated from experimental ac impedance data and the interpretation of the results are given. Molecular modelling has been conducted in an attempt to correlate the corrosion inhibition properties with the calculated quantum chemical parameters.

  13. A study of corrosion inhibition of steel AISI-SAE 1020 in CO2-brine using surfactant Tween 80

    Science.gov (United States)

    Cedeño, M. L.; L, E. Vera; Pineda T, Y.

    2017-01-01

    Surfactant inhibitors also called active surface agents are molecules composed of a polar hydrophilic group and a non-polar hydrophobic group, with characteristics of adsorption on metal surfaces, high efficiency of inhibiting, low price, low toxicity and easy production. In this work, the corrosion inhibition was study by CO2 steel AISI-SAE 1020 with the addition of 0.01M Tween 80 surfactant to a brine solution (3% NaCl). Electrochemical Impedance Spectroscopy and potentiodynamic polarization testing investigated the phenomenon. The results revealed that the surfactant studied acts as an excellent corrosion inhibitor and inhibition efficiency (E%) increases with increasing fluid velocity. The morphology of the steel surface after exposure to the solution of 3% NaCl with and without surfactant indicates the inhibition phenomenon is due to the adsorption of the surfactant molecules, which insulate the surface of the corrosive medium and reduces the attack surficial.

  14. CORROSION INHIBITION OF X70 STEEL IN SALINE SOLUTION SATURATED WITH CO2 BY THIOUREA

    Institute of Scientific and Technical Information of China (English)

    X.Y. He; H.Y. Deng; R. Li; X.D. Fei; H.Y. Wang; Z.Y. Deng

    2008-01-01

    Corrosion monitoring techniques were performed on X70 steel in saline solution saturated with CO2 with and without thiourea additives within the concentration range 5-25 mg/L. It was found that when the concentration of the inhibitors were increased, the inhibitor efficiencies(IE) of thiourea varied with solution temperature and immersion time. The results indicated that thiourea had the highest inhibition efficiency. The potentiondynamic polarization studies revealed that thiourea are mixed-type inhibitor that mainly restrains the anodic process.

  15. Studies on Indian bentonite as the carrying medium in corrosion inhibitive compositions for ferrus metals

    Directory of Open Access Journals (Sweden)

    B. Sanyal

    1959-10-01

    Full Text Available A new type of preservative based on chemical inhibitive incorporated in a suspension of bentonite in water was developed by Sanyal &Preston which proved as efficacious as petroleum base compositions for protection of steel against corrosion during storage and promised to be useful in some fields where use of petroleum base compositions was not feasible. In the present investigation, the performance o f Indian bentonite as the carrying medium for a wide range of chemical inhibitors and their mixtures, ha8 been studied.

  16. Influence of poly(aminoquinone) on corrosion inhibition of iron in acid media

    Science.gov (United States)

    Jeyaprabha, C.; Sathiyanarayanan, S.; Phani, K. L. N.; Venkatachari, G.

    2005-11-01

    The inhibitor performance of chemically synthesized water soluble poly(aminoquinone) (PAQ) on iron corrosion in 0.5 M sulphuric acid was studied in relation to inhibitor concentration using potentiodynamic polarization and electrochemical impedance spectroscopy measurements. On comparing the inhibition performance of PAQ with that of the monomer o-phenylenediamine (OPD), the OPD gave an efficiency of 80% for 1000 ppm while it was 90% for 100 ppm of PAQ. PAQ was found to be a mixed inhibitor. Besides, PAQ was able to improve the passivation tendency of iron in 0.5 M H 2SO 4 markedly.

  17. Electrochemical Study on Corrosion Inhibition of Copper in Hydrochloric Acid Medium and the Rotating Ring-Disc Voltammetry for Studying the Dissolution

    Directory of Open Access Journals (Sweden)

    A. K. Satpati

    2011-01-01

    Full Text Available Dissolution characteristics of copper in hydrochloric acid medium and the effect of 4-amino 1,2,4-triazole (ATA on the corrosion process have been studied using conventional electrochemical techniques and rotating ring-disc electrodes (RRDEs. Corrosion potential (corr and corrosion current density (corr were obtained by Tafel extrapolation methods. Charge transfer resistance (ct and double-layer capacitance (dl were obtained from the electrochemical impedance spectroscopy (EIS. ATA was shown to be an effective inhibitor for the copper-corrosion inhibition in acid medium. The corrosion rate was retarded in presence of inhibitors mainly because of the adsorption of the inhibitor on the electrode surface. Adsorption of the inhibitor on the metal surface was found to follow the Langmuir adsorption isotherm. Standard free energy change of the adsorption process (Δ0ad was calculated to be −54.3 kJ mol−1; such a large negative value of Δ0ad suggests the prescence of a chemisorption process.

  18. Effect of the Unsaturation of the Hydrocarbon Chain of Fatty-Amides on the CO2 Corrosion of Carbon Steel Using EIS and Real-Time Corrosion Measurement

    Directory of Open Access Journals (Sweden)

    J. Porcayo-Calderon

    2015-01-01

    Full Text Available Fatty-amide derivatives were evaluated to study the effect of the double bonds into the hydrocarbon chain (C18 on the corrosion behavior of carbon steel. Electrochemical impedance spectroscopy (EIS and real-time corrosion measurements were used to evaluate the inhibition mechanism of the fatty-amides on carbon steel in CO2-saturated (3% NaCl + 10% diesel emulsion at 50°C. EIS results demonstrated that the unsaturation present into the hydrocarbon chain contributes to the efficiency of fatty-amides, because they can be adsorbed on the metal surface by a flat-adsorption process reducing the presence of active sites and blocking the corrosion process and preventing the diffusion of corrosive species, such as H2O, H+, Cl−, and HCO3-. Real-time corrosion measurements also indicated that the effectiveness of the inhibitors is dependent on the unsaturation into the hydrocarbon chain, being also a good technique to determine the stability of the adsorption process of the inhibitors.

  19. A study of the effects of phosphates on copper corrosion in drinking water: Copper release, electrochemical, and surface analysis approach

    Science.gov (United States)

    Kang, Young C.

    The following work is the study to evaluate the impact of corrosion inhibitors on the copper metal in drinking water and to investigate the corrosion mechanism in the presence and absence of inhibitors. Electrochemical experiments were conducted to understand the effect of specific corrosion inhibitors in synthetic drinking water which was prepared with controlled specific water quality parameters. Water chemistry was studied by Inductively Coupled Plasma--Atomic Emission Spectroscopy (ICP--AES) to investigate the copper leaching rate with time. Surface morphology, crystallinity of corrosion products, copper oxidation status, and surface composition were characterized by various solid surface analysis methods, such as Scanning Electron Microscopy/Energy--Dispersive Spectrometry (SEM/EDS), Grazing-Incidence-angle X-ray Diffraction (GIXRD), X-ray Photoelectron Spectroscopy (XPS), and Time-of-Flight Secondary Ions Mass Spectrometry (ToF-SIMS). The purpose of the first set of experiments was to test various electrochemical techniques for copper corrosion for short term before studying a long term loop system. Surface analysis techniques were carried out to identify and study the corrosion products that form on the fresh copper metal surface when copper coupons were exposed to test solutions for 2 days of experiments time. The second phase of experiments was conducted with a copper pipe loop system in a synthetic tap water over an extended period of time, i.e., 4 months. Copper release and electrochemically measured corrosion activity profiles were monitored carefully with and without corrosion inhibitor, polyphosphate. A correlation between the copper released into the solution and the electrochemically measured corrosion activities was also attempted. To investigate corrosion products on the copper pipe samples, various surface analysis techniques were applied in this study. Especially, static mass spectra acquisition and element distribution mapping were carried out

  20. Inhibition of carbon steel corrosion in CO{sub 2}-saturated brine using some newly surfactants based on palm oil: Experimental and theoretical investigations

    Energy Technology Data Exchange (ETDEWEB)

    Abd El-Lateef, Hany M., E-mail: Hany_shubra@yahoo.co.uk [Chemistry Department, Faculty of Science, Sohag University, Sohag (Egypt); Abbasov, V.M.; Aliyeva, L.I.; Qasimov, E.E.; Ismayilov, I.T. [Mamedaliev Institute of Petrochemical Processes, National Academy of Sciences of Azerbaijan, AZ1025 Baku (Azerbaijan)

    2013-11-01

    New surfactants from the type of fatty acids derivatives were synthesized based on palm oil and their inhibitive action against the corrosion of carbon steel in CO{sub 2}-saturated 1% NaCl solution were investigated at 50 °C. The detailed study of surfactants as corrosion inhibitors is given using polarization curves and electrochemical impedance spectroscopy methods. The inhibition efficiencies obtained from the two employed methods are nearly closed. Results show that, the investigated surfactants are good inhibitors and its inhibition efficiency reaches to 98.95% at 100 ppm for inhibitor V. The high inhibition efficiencies were attributed to the simple blocking effect by adsorption of inhibitor molecules on the steel surface. The surface activity of the synthesized surfactant solutions was determined using surface tension measurements at 25 °C. Adsorption of the inhibitors on the carbon steel surface was found to obey Langmuir's adsorption isotherm and chemisorption. The correlation between the inhibition efficiencies of the studied surfactants and their molecular structures has been investigated using quantum chemical calculations. The obtained theoretical results have been supported our experimental data. - Graphical abstract: To investigate the relationship between molecular structures of the studied surfactants and their inhibition effect; Quantum chemical molecular calculations were performed. The following quantum chemical indices such as highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), energy gap ΔE = E{sub HOMO} − E{sub LUMO}, and dipole moment (μ) were considered. The relation between these parameters and the inhibition efficiencies was explained. The obtained theoretical results have been supported our experimental data. - Highlights: • Effect of surfactants on carbon steel corrosion in CO{sub 2}-saturted brine was investigated. • The high inhibition efficiency attributed to the adherent adsorption

  1. Green approach to corrosion inhibition of mild steel in two acidic solutions by the extract of Punica granatum peel and main constituents

    Energy Technology Data Exchange (ETDEWEB)

    Behpour, M., E-mail: m.behpour@kashanu.ac.ir [Department of Analytical Chemistry, Faculty of Chemistry, University of Kashan, Kashan, I.R. 87317-51167 (Iran, Islamic Republic of); Ghoreishi, S.M.; Khayatkashani, M. [Department of Analytical Chemistry, Faculty of Chemistry, University of Kashan, Kashan, I.R. 87317-51167 (Iran, Islamic Republic of); Soltani, N. [Department of Chemistry, Payame Noor University (PNU), 19395-4697 Tehran (Iran, Islamic Republic of)

    2012-01-05

    Graphical abstract: Ellagic acid (EA) and tannic acid (TA) were studied as corrosion inhibitors. The electron density HOMO and LUMO of EA and TA were used to explain difference in behavior of them. Highlights: Black-Right-Pointing-Pointer The extract of Punica granatum (PG) and their main constituent (ellagic acid (EA)) are found to be good inhibitors for the corrosion of mild steel in 1 M H{sub 2}SO{sub 4} and 2 M HCl. Black-Right-Pointing-Pointer The electrochemical inhibitive mechanism is explained by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) results. Black-Right-Pointing-Pointer The adsorption of ALLOX on mild steel surface was found to accord with the Temkin adsorption isotherm. Black-Right-Pointing-Pointer The effect of temperature on the corrosion behavior of mild steel in 2 M HCl and 1 M H{sub 2}SO{sub 4} without and with the PG extract was studied. - Abstract: The effect of the extract of Punica granatum (PG) and their main constituents involve ellagic acid (EA) and tannic acid (TA), as mild steel corrosion inhibitor in 2 M HCl and 1 M H{sub 2}SO{sub 4} solutions was investigated by weight loss measurements. The results obtained from the weight loss measurements show that the inhibition efficiency of TA even in high concentration is very low. Thus, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) investigations were used for different concentrations of PG and EA and best concentration of TA. Potentiodynamic polarization curves indicated that PG and EA behave as mixed-type inhibitors. EIS measurements show an increase of the transfer resistance with increasing inhibitor concentration. The temperature effect on the corrosion behavior of steel without and with the PG extract was studied. The inhibition action of the extract was discussed in view of Langmuir adsorption isotherm.

  2. Effect of Wall Shear Stress on Corrosion Inhibitor Film Performance

    Science.gov (United States)

    Canto Maya, Christian M.

    In oil and gas production, internal corrosion of pipelines causes the highest incidence of recurring failures. Ensuring the integrity of ageing pipeline infrastructure is an increasingly important requirement. One of the most widely applied methods to reduce internal corrosion rates is the continuous injection of chemicals in very small quantities, called corrosion inhibitors. These chemical substances form thin films at the pipeline internal surface that reduce the magnitude of the cathodic and/or anodic reactions. However, the efficacy of such corrosion inhibitor films can be reduced by different factors such as multiphase flow, due to enhanced shear stress and mass transfer effects, loss of inhibitor due to adsorption on other interfaces such as solid particles, bubbles and droplets entrained by the bulk phase, and due to chemical interaction with other incompatible substances present in the stream. The first part of the present project investigated the electrochemical behavior of two organic corrosion inhibitors (a TOFA/DETA imidazolinium, and an alkylbenzyl dimethyl ammonium chloride), with and without an inorganic salt (sodium thiosulfate), and the resulting enhancement. The second part of the work explored the performance of corrosion inhibitor under multiphase (gas/liquid, solid/liquid) flow. The effect of gas/liquid multiphase flow was investigated using small and large scale apparatus. The small scale tests were conducted using a glass cell and a submersed jet impingement attachment with three different hydrodynamic patterns (water jet, CO 2 bubbles impact, and water vapor cavitation). The large scale experiments were conducted applying different flow loops (hilly terrain and standing slug systems). Measurements of weight loss, linear polarization resistance (LPR), and adsorption mass (using an electrochemical quartz crystal microbalance, EQCM) were used to quantify the effect of wall shear stress on the performance and integrity of corrosion inhibitor

  3. Density functional theory and molecular dynamics simulation study on corrosion inhibition performance of mild steel by mercapto-quinoline Schiff base corrosion inhibitor

    Science.gov (United States)

    Saha, Sourav Kr.; Ghosh, Pritam; Hens, Abhiram; Murmu, Naresh Chandra; Banerjee, Priyabrata

    2015-02-01

    Corrosion inhibition mechanism of two mercapto-quinoline Schiff bases, eg., 3-((phenylimino)methyl)quinoline-2-thiol (PMQ) and 3-((5-methylthiazol-2-ylimino)methyl) quinoline-2-thiol (MMQT) on mild steel surface is investigated by quantum chemical calculation and molecular dynamics simulation. Quantum chemical parameters such as EHOMO, ELUMO, energy gap (ΔE), dipolemoment (μ), electronegativity (χ), global hardness (η) and fraction of electron transfers from the inhibitor molecule to the metallic atom surface (ΔN) have been studied to investigate their relative corrosion inhibition performance. Parameters like local reactive sites of the present molecule have been analyzed through Fukui indices. Moreover, adsorption behavior of the inhibitor molecules on Fe (1 1 0) surface have been analyzed using molecular dynamics simulation. The binding strength of the concerned inhibitor molecules on mild steel surface follows the order MMQT>PMQ, which is in good agreement with the experimentally determined inhibition efficiencies. In view of the above, our approach will be helpful for quick prediction of a potential inhibitor from a lot of similar inhibitors and subsequently in their rational designed synthesis for corrosion inhibition application following a wet chemical synthetic route.

  4. Corrosion inhibition and adsorption characteristics of Tridax Procumbens L leaves extract on mild steel immersed in 1M HCl solution

    Directory of Open Access Journals (Sweden)

    Kenneth Kanayo ALANEME

    2016-12-01

    Full Text Available The corrosion inhibition and adsorption mechanism of Tridax procumbens Linn leaves extract on mild steel immersed in 1M HCl solution was investigated. Mass loss, corrosion rate and inhibition efficiency from gravimetric and potentiodynamic polarization measurements, atomic adsorption spectroscopy (AAS, Fourier transform infra red spectroscopy (FTIR, and scanning electron microscopy; were used for the analysis. The results show that within the selected range of concentration of the extract and corrosion test temperatures, the inhibition efficiency obtained was within the range of 81 and 96 %. The efficiency values were observed to increase with increase in the extract concentration but decreased slightly with increase in temperature. The inhibitor molecules were noted to be physically adsorbed on the mild steel surface with OH, NH, and CO groups confirmed as the active phytochemical constituents in the extract responsible for the adsorption. The adsorption process fitted perfectly with the Langmuir adsorption isotherm indicating that the extract was strongly adsorbed on the mild steel surface.

  5. Inhibition of microbial concrete corrosion by Acidithiobacillus thiooxidans with functionalised zeolite-A coating.

    Science.gov (United States)

    Haile, Tesfaalem; Nakhla, George

    2009-01-01

    The inhibition of the corrosive action of Acidithiobacillus thiooxidans on concrete specimens coated by functionalised zeolite-A containing 14% zinc and 5% silver by weight was studied. Uncoated concrete specimens, epoxy-coated concrete specimens (EP), and functionalised zeolite-A coated concrete specimens with epoxy to zeolite weight ratios of 3:1 (Z1), 2:2 (Z2) and 1:3 (Z3) were studied. Specimens were characterised by x-ray powder diffraction and field emission scanning electron microscopy for the identification of corrosion products and morphological changes. Biomass growth at the conclusion of the 32-day experiments was 4, 179 and 193 mg volatile suspended solids g(-1) sulphur for the uncoated, EP and Z1 specimens, whereas that of Z2 and Z3 were negligible. In the uncoated, EP and Z1 specimens, sulphate production rates were 0.83, 9.1 and 8.8 mM SO(4)(2-) day(-1) and the specific growth rates, mu, were 0.14, 0.57 and 0.47 day(-1), respectively. The corresponding values for Z2 and Z3 were negligible due to their bacterial inhibition characteristics.

  6. Electrochemical evaluation of inhibition efficiency of ciprofloxacin on the corrosion of copper in acid media

    Energy Technology Data Exchange (ETDEWEB)

    Thanapackiam, P. [Department of Chemistry, Coimbatore Institute of Technology, Coimbatore, Tamilnadu, 641 014 (India); Rameshkumar, Subramaniam [Department of Chemistry, Sri Vasavi College, Erode, Tamilnadu, 638 316 (India); Subramanian, S.S. [Department of Chemistry, PSG College of Technology, Coimbatore, Tamilnadu, 641 004 (India); Mallaiya, Kumaravel, E-mail: mkvteam.research@gmail.com [Department of Chemistry, PSG College of Technology, Coimbatore, Tamilnadu, 641 004 (India)

    2016-05-01

    The inhibition efficiency of ciprofloxacin on the corrosion of copper was studied in 1.0MHNO{sub 3} and 0.5MH{sub 2}SO{sub 4} solutions by electrochemical impedance spectroscopy and potentiodynamic polarization techniques. The corrosion inhibition action of ciprofloxacin was observed to be of mixed type in both the acid media, but with more of a cathodic nature. The experimental data were found to fit well with the Langmuir adsorption isotherm. The thermodynamic parameters such as adsorption equilibrium constant(K{sub ads}), free energy of adsorption(ΔG{sub ads}), activation energy(E{sub a}) and potential of zero charge(PZC) showed that the adsorption of ciprofloxacin onto copper surface involves both physisorption and chemisorption. - Highlights: • The inhibitor efficiency increases with increase in ciprofloxacin concentration. • Polarization measurements show that ciprofloxacin acts as a mixed type inhibitor. • The adsorption of the inhibitor on copper surface follows Langmuir adsorption isotherm. • The negative values of ΔG{sub ads} indicates that the adsorption is spontaneous and exothermic.

  7. Corrosion inhibition efficiency and surface activity of benzothiazol-3-ium cationic Schiff base derivatives in hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Negm, N.A., E-mail: nabelnegm@hotmail.co [Petrochemicals Department, Egyptian Petroleum Research Institute, Nasr City, Cairo (Egypt); Elkholy, Y.M.; Zahran, M.K. [Chemistry Department, Faculty of Science, Helwan University, Helwan (Egypt); Tawfik, S.M. [Petrochemicals Department, Egyptian Petroleum Research Institute, Nasr City, Cairo (Egypt)

    2010-10-15

    Research highlights: {yields} Benzothiazolium inhibitors show high corrosion inhibition for carbon steel. {yields} Weight loss and corrosion rates decrease by increasing inhibitor dose. {yields} Inhibition mechanism suggested as physisorption mechanism supported by adsorption free energy values. {yields} The adsorption of the inhibitors obeys Langmuir isotherm. {yields} Side chains have ascending order on the corrosion inhibition of the different inhibitors. - Abstract: Two series of cationic Schiff base surfactants namely: 2-(benzylideneamino)-3-(2-oxo-2-alkoxyethyl)-1,3-benzothiazol-3-ium bromide and 2-[(4-methoxybenzylidene)amino]-3-(2-oxo-2-alkoxyethyl)-1, 3-benzothiazol-3-ium bromide were prepared and confirmed using elemental analysis, FTIR, and {sup 1}H NMR spectra. The surface activity of the synthesized Schiff bases showed their tendency towards adsorption at the interfaces. The prepared compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution using gravimetric and polarization measurements. By fitting the gravimetric data, some thermodynamic and kinetic parameters were estimated. The adsorption of the inhibitors on the carbon steel surface obeyed Langmuir adsorption isotherm and had a physical mechanism. Polarization measurements showed that the synthesized inhibitors act as mixed inhibitors for carbon steel in the acidic media. The results of the corrosion inhibition using two different methods showed narrow differences in the obtained values between the two methods within 5%.

  8. Effect of heat treatment on corrosion behavior of duplex coatings

    Directory of Open Access Journals (Sweden)

    K. Raghu Ram Mohan Reddy

    2017-01-01

    Full Text Available In the present paper, duplex WC-Co/NiCrAlY coating is coated onto Ti6Al4V substrate and vacuum heat treatment is employed to investigate the corrosion behavior of heat treated samples as well as Ti6Al4V substrate for comparison. In this duplex coating system, High Velocity Oxy Fuel (HVOF process is used to deposit NiCrAlY interlayer with a constant thickness of 200 μm and WC-Co ceramic top layer with varying thickness of 250 μm, 350 μm and 450 μm deposited by Detonation Spray (DS process. Different heat treatment temperatures (600–1150 °C were employed for the coated samples to study the microstructure and the effect on corrosion resistance of the duplex coatings. Potentiodynamic polarization tests were carried to investigate the corrosion performance of duplex coated heat treated samples and the substrate in Ringer’s solution at 37 °C and prepared the pH to 5.7. The microstructure upon corrosion after heat treatment was characterized by SEM analysis to understand the corrosion behavior. The results disclosed that at all heat treatment temperatures, all the coated samples exhibited better corrosion resistance than the base substrate. However, during 950 °C and 1150 °C heat treatment temperatures, it was observed highest corrosion potential than 600 °C and 800 °C. The 350 μm thickness, coated sample exhibited highest corrosion resistance compared to other two coated samples and the substrate at all heat treatment temperatures.

  9. Application of Mössbauer spectroscopy to the study of tannins inhibition of iron and steel corrosion

    Science.gov (United States)

    Jaén, Juan A.; de Obaldía, J.; Rodríguez, M. V.

    2011-11-01

    The inhibitory effect of tannins was investigated using, among others, potentiodynamic polarizations and Mössbauer spectroscopy. These techniques confirmed that the nature, pH and concentration of tannic solution are of upmost importance in the inhibitory properties of the solutions. It is observed that at low tannin concentration or pH, both, hydrolizable and condensed tannins, effectively inhibit iron corrosion, due to the redox properties of tannins. At pH ≈ 0, Mössbauer spectra of the frozen aqueous solutions of iron(III) with the tannin solutions showed that iron is in the form of a monomeric species [Fe(H2O)6]3 + , without coordination with the functional hydroxyl groups of the tannins. The suspended material consisted of amorphous ferric oxide and oxyhydroxides, though with quebracho tannin partly resulted in complex formation and in an iron (II) species from a redox process. Other tannins, such as chestnut hydrolysable tannins, do not complex iron at this low pH. Tannins react at high concentrations or pH (3 and 5) to form insoluble blue-black amorphous complexes of mono-and bis-type tannate complexes, with a relative amount of the bis-ferric tannate generally increasing with pH. Some Fe2 + in the form of hydrated polymeric ferrous tannate could be obtained. At pH 7, a partially hydrolyzed ferric tannate complex was also formed. The latter two phases do not provide corrosion protection. Tannin solutions at natural pH react with electrodeposited iron films (approx. 6 μm) to obtain products consisting only on the catecholate mono-complex of ferric tannate. Some aspects of the mechanism of tannins protection against corrosion are discussed.

  10. Corrosion inhibition of Eleusine aegyptiaca and Croton rottleri leaf extracts on cast iron surface in 1 M HCl medium

    Energy Technology Data Exchange (ETDEWEB)

    Rajeswari, Velayutham [Department of Chemistry, Periyar University, Salem 636011 (India); Kesavan, Devarayan [Department of Chemistry, Dhirajlal Gandhi College of Technology, Salem 636309 (India); Gopiraman, Mayakrishnan [Department of Chemistry, National Institute of Technology, Tiruchirappalli 620015 (India); Viswanathamurthi, Periasamy, E-mail: viswanathamurthi72@gmail.com [Department of Chemistry, Periyar University, Salem 636011 (India); Poonkuzhali, Kaliyaperumal; Palvannan, Thayumanavan [Department of Bio-Chemistry, Periyar University, Salem 636011 (India)

    2014-09-30

    Graphical abstract: - Highlights: • Eleusine aegyptiaca and Croton rottleri are commonly available, less-toxic and eco-friendly inhibitors for cast iron corrosion. • The active constituents present in extracts adsorbed on the iron surface to inhibit the acidic corrosion. • The higher values of E{sub a} and ΔH{sup *} point out the higher inhibition efficiency noticed for the inhibitors. • Weight loss methods at various temperature and spectral data provides evidence for adsorption mechanism of inhibitors. - Abstract: The adsorption and corrosion inhibition activities of Eleusine aegyptiaca (E. aegyptiaca) and Croton rottleri (C. rottleri) leaf extracts on cast iron corrosion in 1 M hydrochloric acid solution were studied first time by weight loss and electrochemical techniques viz., Tafel polarization and electrochemical impedance spectroscopy. The results obtained from the weight loss and electrochemical methods showed that the inhibition efficiency increased with inhibitor concentrations. It was found that the extracts acted as mixed-type inhibitors. The addition of halide additives (KCl, KBr, and KI) on the inhibition efficiency has also been investigated. The adsorption of the inhibitors on cast iron surface both in the presence and absence of halides follows the Langmuir adsorption isotherm model. The inhibiting nature of the inhibitors was supported by FT-IR, UV–vis, Wide-angle X-ray diffraction and SEM methods.

  11. Corrosion Inhibition of Aluminum in 0.5 M HCl by Garlic aqueous extract

    Directory of Open Access Journals (Sweden)

    Saedah R. Al-Mhyawi

    2014-06-01

    Full Text Available The inhibition efficiency of extract of Garlic on aluminium in hydrochloric acid solutions has been evaluated by weight loss techniques. Values of inhibition efficiency obtained are dependent upon the concentration of inhibitor and temperature. Generally, inhibition was found to increase with inhibitor concentration, half-life, activation energy but decrease with temperature and first-order rate constant at the temperatures studied. Physical adsorption mechanism has been proposed for the inhibition and Langmuir , Temkin adsorption isotherm was obeyed. Garlic is an inhibitor of aluminium corrosion in 0.5 M hydrochloric acid solution.The values of standard free energy of adsorption suggest that the adsorption of inhibitor on aluminium surface occurred by physisorption mechanism. the negative sign of the Free Energy of adsorption indicates that the adsorption of the inhibitors on the aluminum surface was a spontaneous process.the negative values of enthalpy of adsorption (ΔH suggest that the chemical reaction involved in the adsorption of the inhibitors on the metal surface is an exothermic process, hence increase in the reaction temperature of the medium will decrease the inhibition efficiency.

  12. Effects of Cl- and SO2-4 Ions on Corrosion Behavior of X70 Steel

    Institute of Scientific and Technical Information of China (English)

    Junwei WU; Xiaogang LI; Cuiwei DU; Song WANG; Yiquan SONG

    2005-01-01

    Corrosion behaviors of X70 steel were studied by means of electrochemical experiments and morphology observation.First, through potentiodynamic polarization in solution of various Cl- ions concentration, it was found that Epit began to appear in solution of Cl- concentration above 0.1 mol/L, and there was a critical point of Cl- concentration between 0.05 mol/L and 0.1 mol/L, below which the extent of pitting and general corrosion were trivial, while in solution of Cl- concentration above 0.1 mol/L, general and pitting corrosion became greater as the increasing of Cl- concentration. All of them were confirmed by the SEM observations after anodic polarization. Second, via the potentiodynamic polarization curves of X70 steel in 0.5 mol/L Cl- solution with 0, 0.05, 0.5 and 1 mol/L SO42-ions, it was found SO42- ions were able to inhibit corrosion aroused from Cl- ions, accordingly a model was set up to describe the process. In addition, to further explore the inhibited effect of SO42- ions, EIS was used in solutions of different Cl- and SO42- concentrations, the results revealed that the e(ectrochemical resistance has a relation with the [SO42-]/[Cl-], that was, the bigger the value of [SO42-]/[Cl-], the greater the electrochemical resistance.

  13. Adsorption properties and inhibition of mild steel corrosion in hydrochloric solution by some newly synthesized diamine derivatives: Experimental and theoretical investigations

    Energy Technology Data Exchange (ETDEWEB)

    Herrag, L.; Hammouti, B.; Elkadiri, S.; Aouniti, A. [Laboratoire de Chimie Appliquee et Environnement, LCAE-URAC18, Faculte des Sciences, Universite Mohammed Premier, B.P. 717, M-6000 Oujda (Morocco); Jama, C. [Unite Materiaux et Transformations (UMET), Ingenierie des Systemes Polymeres, CNRS UMR 8207, ENSCL, B.P. 90108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, H. [Laboratoire de Spectrochimie Infrarouge et Raman (LASIR), UMR-CNRS 8516, Universite des Sciences et Technologies de Lille, Batiment C5, F-59655 Villeneuve d' Ascq Cedex (France); Bentiss, F., E-mail: fbentiss@enscl.f [Laboratoire de Chimie de Coordination et d' Analytique (LCCA), Faculte des Sciences, Universite Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco)

    2010-09-15

    New diamine derivatives, namely 2-[{l_brace}2-[bis-(2-hydroxyethyl)amino]ethyl{r_brace}(2-hydroxyethyl)amino]ethanol (DAME) and 2-[{l_brace}2-[bis-(2-hydroxyethyl)amino]ethyl{r_brace}(2-hydroxyethyl)amino]propanol (DAMP) were synthesised and their inhibitive action against the corrosion of mild steel in 1 M HCl solution were investigated at 308 K. The detailed study of DAME is given using gravimetric measurements and polarization curves method. Results show that DAME is a good inhibitor and inhibition efficiency reaches 91.7% at 10{sup -3} M. Tafel polarization study revealed that DAME acts as a mixed-type inhibitor. The inhibitor adsorption process in mild steel/DAME/hydrochloric acid system was studied at different temperatures (308-353 K) by means of weight loss measurements. The adsorption of DAME on steel surface obeyed Langmuir's adsorption isotherm. The kinetic and thermodynamic parameters for mild steel corrosion and inhibitor adsorption, respectively, were determined and discussed. The comparative study of inhibitive performance of the two diamine derivatives revealed that DAME is more effective than DAMP. Quantitative Structure-Activity Relationship (QSAR) approach has been conducted in attempt to correlate the corrosion inhibition properties of these diamine derivatives with their calculated quantum chemical parameters.

  14. Thermodynamic, adsorption and corrosion inhibitive behaviour of benzyl nicotinate on cold rolled steel in sulphuric acid solution

    Directory of Open Access Journals (Sweden)

    Vinutha Rangaswamy Mutugadahalli

    2015-12-01

    Full Text Available The inhibition performance of benzyl nicotinate (BN on corrosion of cold rolled steel (CRS in 0.5 M H2SO4 solution has been investigated using weight loss, Tafel polarization and electrochemical impedance spectroscopy (EIS. The BN acts as mixed type inhibitor. The thermodynamic parameters indicate the comprehensive nature adsorption of BN on CRS which obey Langmuir isotherm. Morphological investigation of corrosion inhibition is carried out using AFM and optical microscopic studies support the formation of inhibitor film on CRS. There is a good agreement between the values of weight loss measurements and electrochemical studies. 

  15. Environmental and alloying effects on corrosion of metals and alloys

    Science.gov (United States)

    Liang, Dong

    2009-12-01

    species could be missed in standard laboratory exposures such as ASTM B117. Initial efforts focused on the effects UV radiation, O3, relative humidity on the atmospheric corrosion of bare silver. Later work addressed the corrosion of silver samples deposited with NaCl particles. An exposure chamber that can simulate various environmental effects was built. The effects of UV radiation, O3, and relative humidity were varied separately while keeping the other factors the same level. The corrosion products were analyzed by the galvanostatic reduction method and characterization techniques such as SEM and EDS. It was found that both UV and O3 are necessary for fast corrosion on bare silver and this fast corrosion reaction results from atomic oxygen generated photodegradation of O3. In the presence of UV and O3, relative humidity has little effect on the atmospheric corrosion of bare silver in contrast to conventional atmospheric corrosion. The degree of corrosion is found to increase with O3 concentration. Moreover, a kinetic study of atmospheric corrosion of bare silver found that an incubation time for the atmospheric corrosion attack is needed. This incubation time is related to the chemisorption process of atomic oxygen. Though UV radiation can form reactive atomic oxygen which is more reactive than O3 alone as shown in the last chapter, the enhancement of corrosion by UV is limited for Ag with NaCl particles at low ozone concentration and high RH. The corrosion rate of silver with NaCl particles is found to increase with relative humidity, which is different than the case of bare silver. This indicates that different mechanisms control the atmospheric corrosion of silver. The incubation time for corrosion of silver with NaCl particles is shorter than for bare silver. This result from chemisorption of Cl 2 is favored over that of atomic oxygen. Interestingly, the total corrosion product of silver with NaCl particles is less than that of bare silver. This could be due to

  16. Synergistic of a coumarin derivative with potassium iodide on the corrosion inhibition of aluminum alloy in 1.0 M H2SO4

    Science.gov (United States)

    Mohamad, Abu Bakar; Kadhum, Abdul Amir H.; Al-Amiery, Ahmed A.; Ying, Lim Chai; Musa, Ahmed Y.

    2014-05-01

    Synergistic effects of the addition of KI on the corrosion inhibitive performance of a coumarin derivative on an aluminum alloy in 1.0 M H2SO4 at different temperatures were studied using various electrochemical measurements. Density functional theory was used to calculate the quantum chemical parameters of the coumarin derivative. The experimental results showed that the coumarin derivative is considered as a mixedtype inhibitor. The corrosion potential values were almost unchanged upon the addition of PBBC to the acidic solution. The inhibition efficiency increases with increasing inhibitor concentration and increases further in the presence of 6.02 mM KI but decreases significantly at higher temperature. The adsorption of PBBC obeyed the Langmuir isotherm, and being chemically adsorbed at lower temperatures, while physical adsorption is favoured at higher temperature. The theoretical results indicated that the coumarin derivative was adsorbed onto the surface of Al2024 through the sulfur, oxygen and nitrogen atoms.

  17. Study on the inhibition of mild steel corrosion by 1,3-bis-(morpholin-4-yl-phenyl-methyl-thiourea in hydrochloric acid medium

    Directory of Open Access Journals (Sweden)

    Devaraj Karthik

    2014-12-01

    Full Text Available 1,3-Bis-(morpholin-4-yl-phenyl-methyl-thiourea (MBT was synthesized and their influence on the inhibition of corrosion on mild steel in various hydrochloric acid concentrations has been investigated by weight loss, potentiodynamic polarization, electrochemical impedance (EI, Tafel polarization, scanning electron microscope (SEM and FT-IR methods. The result of weight loss study shows that the corrosion inhibition efficiency (IE is directly proportional to the concentration of the inhibitor and inversely proportional to the temperature. Electrochemical study proved that the inhibitor acts as a mixed type inhibitor. SEM shows the formation of a protective film of the inhibitor on the mild steel. The IR data also provide evidence for the anticorrosion effect of the inhibitor.

  18. Effects of disinfectant and biofilm on the corrosion of cast iron pipes in a reclaimed water distribution system.

    Science.gov (United States)

    Wang, Haibo; Hu, Chun; Hu, Xuexiang; Yang, Min; Qu, Jiuhui

    2012-03-15

    The effects of disinfection and biofilm on the corrosion of cast iron pipe in a model reclaimed water distribution system were studied using annular reactors (ARs). The corrosion scales formed under different conditions were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM), while the bacterial characteristics of biofilm on the surface were determined using several molecular methods. The corrosion scales from the ARs with chlorine included predominantly α-FeOOH and Fe2O3, while CaPO3(OH)·2H2O and α-FeOOH were the predominant phases after chloramines replaced chlorine. Studies of the consumption of chlorine and iron release indicated that the formation of dense oxide layers and biofilm inhibited iron corrosion, causing stable lower chlorine decay. It was verified that iron-oxidizing bacteria (IOB) such as Sediminibacterium sp., and iron-reducing bacteria (IRB) such as Shewanella sp., synergistically interacted with the corrosion product to prevent further corrosion. For the ARs without disinfection, α-FeOOH was the predominant phase at the primary stage, while CaCO3 and α-FeOOH were predominant with increasing time. The mixed corrosion-inducing bacteria, including the IRB Shewanella sp., the IOB Sediminibacterium sp., and the sulfur-oxidizing bacteria (SOB) Limnobacter thioxidans strain, promoted iron corrosion by synergistic interactions in the primary period, while anaerobic IRB became the predominant corrosion bacteria, preventing further corrosion via the formation of protective layers. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. Studies on the inhibition of mild steel corrosion in hydrochloric acid solution by atenolol drug

    Directory of Open Access Journals (Sweden)

    G. Karthik

    2016-06-01

    Full Text Available The inhibition performance of atenolol on mild steel in 1 M hydrochloric acid solution was studied by weight loss and electrochemical methods. The results show the inhibition efficiency was found to increase with increasing the concentration of the inhibitor from 50 to 300 ppm. The maximum inhibition efficiency 93.8% was observed in the presence of 300 ppm inhibitor (in case of potentiodynamic polarization. The inhibition action of atenolol was explained in terms of adsorption on the mild steel surface. The adsorption process follows Langmuir isotherm via physical adsorption. Electrochemical Impedance spectroscopic technique (EIS exhibits one capacitive loop indicating that, the corrosion reaction is controlled by charge transfer process. Polarization measurements showed that the inhibitor is of a mixed type. The results obtained from the different methods are in good agreement. The surface morphologies of mild steel were examined by Fourier-transform infrared (FT-IR spectroscopy, scanning electron microscope (SEM. Further, the computational calculations are performed to find a relation between their electronic and structural properties.

  20. Computational study of some triazole derivatives (un- and protonated forms) and their copper complexes in corrosion inhibition process

    Science.gov (United States)

    El Ibrahimi, Brahim; Soumoue, Aziza; Jmiai, Aziz; Bourzi, Hassan; Oukhrib, Rachid; El Mouaden, Khadija; El Issami, Souad; Bazzi, Lahcen

    2016-12-01

    Three triazoles compounds used as corrosion inhibitors for copper in acidic medium, namely: 1,2,4 triazole (TR), 3-amino 1,2,4 triazole (3 ATR) and 3,5-diamino 1,2,4 triazole (3,5 DATR) have been studied theoretically in aim to investigate the correlation between its molecular reactivity indicators and the corresponding inhibition efficiency. All quantum chemical calculations at the B3LYP/6-31+G(d,p) method were performed with and without solvent effect. In the present paper, not only the neutral inhibitors has been studied, but also the first and the second protonation forms. A good correlation between theoretical and experimental data has been obtained both in gas and aqueous phases, notably for unprotonated inhibitors. Also, the interaction energy between inhibitors and copper has been calculated.

  1. Corrosion inhibition properties of graphene oxide on mild steel in 3.5% NaCl

    Science.gov (United States)

    Anandh Senthilvasan, Prem; Rangarajan, Murali

    2016-09-01

    In this work the corrosion inhibition of mild steel in 3.5% Sodium chloride (NaCl) solution at ambient conditions by Graphene Oxide (GO) has been studied. Graphene oxide was prepared by Modified Hummers Method and characterized by Fourier Transform Infrared spectroscopy (FTIR), UV-Visible spectroscopy (UV-Vis), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Thermo-Gravimetric Analysis (TGA). The electrochemical corrosion behaviour of mild steel has been studied in the absence and presence of GO coatings by Tafel polarization and impedance analyses. The modified electrode has 44.8mV potential shift in the cathodic direction and reduction in current by 41.9 μA (61%). This indicates the strong protection offered by graphene oxide film. The obtained impedance spectra also clearly show that the charge transfer resistance of graphene oxide film is much higher than that of the uncoated steel electrode, demonstrating the strong protection offered by graphene oxide films for mild steel.

  2. Corrosion Inhibition Mechanism of Rare Earth Metal on LC4 Al Alloy with Spilt Cell Technique

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new method of studying the corrosion inhibition mechanism of rare earth metal(REM) on LC4 Al alloy with the spilt cell technique was studied. The principle and experimental method of the spilt cell technique were analyzed. By measuring the change of net-electric current between the two electrodes caused by the change of the amount of oxygen in the solution and the addition of CeCl3, the influence of corrosive performance of CeCl3 on LC4 super-power aluminum alloy in the 0.1 mol*L-1 NaCl solution was investigated. Meanwhile, the conditional changes of pH values, CeCl3 solution, additire and time of performance were also studied. Finally, the features of electrode surface were revealed by using SEM and X-ray energy-dispersive spectrometry (EDS). By combining these with other electric chemical techniques, such as potential-time curve, polarization curve et al.

  3. Corrosion inhibition by inorganic cationic inhibitors on the high strength alumunium alloy, 2024-T3

    Science.gov (United States)

    Chilukuri, Anusha

    The toxicity and carcinogenic nature of chromates has led to the investigation of environmentally friendly compounds that offer good corrosion resistance to AA 2024-T3. Among the candidate inhibitors are rare earth metal cationic (REM) and zinc compounds, which have received much of attention over the past two decades. A comparative study on the corrosion inhibition caused by rare earth metal cations, Ce3+, Pr3+, La3+ and Zn2+ cations on the alloy was done. Cathodic polarization showed that these inhibitor ions suppress the oxygen reduction reaction (ORR) to varying extents with Zn2+ providing the best inhibition. Pr3+ exhibited windows of concentration (100-300 ppm) in which the corrosion rate is minimum; similar to the Ce3+ cation. Scanning Electron Microscopy (SEM) studies showed that the mechanism of inhibition of the Pr3+ ion is also similar to that of the Ce3+ ion. Potentiodynamic polarization experiments after 30 min immersion time showed greatest suppression of oxygen reduction reaction in neutral chloride solutions (pH 7), which reached a maximum at a Zn2+ ion concentration of 5 mM. Anodic polarization experiments after 30 min immersion time, showed no anodic inhibition by the inhibitor in any concentration (0.1 mM - 10 mM) and at any pH. However, anodic polarization of samples immersed after longer immersion times (upto 4 days) in mildly acidic Zn2+ (pH 4) solutions showed significant reduction in anodic kinetics indicating that zinc also acts as a “slow anodic inhibitor”. In contrast to the polarization experiments, coupons exposed to inhibited acidic solutions at pH 4 showed complete suppression of dissolution of Al2CuMg particles compared to zinc-free solutions in the SEM studies. Samples exposed in pH 4 Zn2+-bearing solution exhibited highest polarization resistance which was also observed to increase with time. In deaerated solutions, the inhibition by Zn2+ at pH 4 is not observed as strongly. The ability to make the interfacial electrolyte

  4. Risk-based underground pipeline safety management considering corrosion effect.

    Science.gov (United States)

    Shin, Seolin; Lee, Gunhak; Ahmed, Usama; Lee, Yongkyu; Na, Jonggeol; Han, Chonghun

    2017-08-18

    Due to the long term usage and irregular maintenance for corrosion checks, catastrophic accidents have been increasing in underground pipelines. In this study, a new safety management methodology of underground pipeline, risk-based pipeline management, is introduced reflecting corrosion effect. First, principle of the risk-based pipeline management is presented compared with an original method, qualitative measure. It is distinguished from the qualitative measure by reflecting societal risk and corrosion in safety management of underground pipeline. And then, it is applied to an existing underground propylene pipeline in Ulsan Industrial Complex, South Korea. The consequence analysis is based on real information, and the frequency analysis reflects degree of corrosion. For calculation of corrosion rate, direct current voltage gradient (DCVG) and close interval potential survey (CIPS) are conducted. As a result of applying the risk-based pipeline management, risk integral is reduced by 56.8% compared to the qualitative measure. Finally, sensitivity analysis is conducted on variables, which affect the risk of the pipeline. This study would contribute to introduce quantitative measure to pipeline management and increase safety of pipeline. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Corrosion Inhibition Performance of Triazole Derivatives on Copper-Nickel Alloy in 3.5 wt.% NaCl Solution

    Science.gov (United States)

    Jiang, B.; Jiang, S. L.; Liu, X.; Ma, A. L.; Zheng, Y. G.

    2015-12-01

    This study investigates the performance of three triazole derivatives with different molecular structures as corrosion inhibitors for the copper-nickel alloy CuNi 90/10 in 3.5 wt.% NaCl solution. Inhibition behavior was systematically determined through electrochemical measurements, scanning electron microscopy, energy-dispersive spectroscopy, and Fourier transform infrared spectroscopy. In addition, adsorption behavior and the inhibition mechanism were investigated via quantum chemical calculation and molecular dynamic simulation. Experimental results indicate that the three inhibitors with triazole rings and heteroatoms exhibited excellent corrosion inhibition capabilities on the copper-nickel alloy surface through physisorption and chemisorption. In particular, 3-amino-5-mercapto-1,2,4-triazole showed the best inhibition capability according to the concentration ranges considered in the experiments. The results of quantum chemical calculation agreed with the experimental findings.

  6. Corrosion inhibition of Eleusine aegyptiaca and Croton rottleri leaf extracts on cast iron surface in 1 M HCl medium

    Science.gov (United States)

    Rajeswari, Velayutham; Kesavan, Devarayan; Gopiraman, Mayakrishnan; Viswanathamurthi, Periasamy; Poonkuzhali, Kaliyaperumal; Palvannan, Thayumanavan

    2014-09-01

    The adsorption and corrosion inhibition activities of Eleusine aegyptiaca (E. aegyptiaca) and Croton rottleri (C. rottleri) leaf extracts on cast iron corrosion in 1 M hydrochloric acid solution were studied first time by weight loss and electrochemical techniques viz., Tafel polarization and electrochemical impedance spectroscopy. The results obtained from the weight loss and electrochemical methods showed that the inhibition efficiency increased with inhibitor concentrations. It was found that the extracts acted as mixed-type inhibitors. The addition of halide additives (KCl, KBr, and KI) on the inhibition efficiency has also been investigated. The adsorption of the inhibitors on cast iron surface both in the presence and absence of halides follows the Langmuir adsorption isotherm model. The inhibiting nature of the inhibitors was supported by FT-IR, UV-vis, Wide-angle X-ray diffraction and SEM methods.

  7. Corrosion inhibition of mild steel in acidic media using newly synthesized heterocyclic organic molecules: Correlation between inhibition efficiency and chemical structure

    Energy Technology Data Exchange (ETDEWEB)

    Ouici, H. B., E-mail: ouici.houari@yahoo.fr; Guendouzi, A., E-mail: guendouzzi@yahoo.fr [Departement of Chimistry, Faculty of Sciences, University of Saïda (Algeria); Benali, O. [Department of Biology, Faculty of Science, University of Saida (Algeria)

    2015-03-30

    The corrosion inhibition of mild steel in 5% HCl solutions by some new synthesized organic compounds namely 3-(2-methoxyphenyl) 5-mercapto-1. 2. 4-triazole (2-MMT), 3-(3-methoxyphenyl) 5-mercapto-1. 2. 4-triazole (3-MMT) and 3-(2-hydroxyphenyl) 5-mercapto-1. 2. 4-triazole (2-HMT) was investigated using weight loss and potentiostatic polarization techniques. These measurements reveal that the inhibition efficiency obtained by these compounds increased by increasing their concentration. The inhibition efficiency follows the order 2-MMT >3-MMT >2-HMT. Polarization studies show that these compounds are of the mixed type but dominantly act as a cathodic inhibitors for mild steel in 5% HCl solutions. These inhibitors function through adsorption following Langmuir isotherm. Activation energy and Gibbs free energy for adsorption of inhibitors are calculated. Molecular modeling has been conducted to correlate the corrosion inhibition properties with the calculated quantum chemical parameters.

  8. Influence of surfactants on the corrosion inhibition behaviour of 2-aminophenyl-5-mercapto-1-oxa-3,4-diazole (AMOD) on mild steel

    Energy Technology Data Exchange (ETDEWEB)

    Rafiquee, M.Z.A. [Department of Applied Chemistry, Corrosion Research Laboratory, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh 202002 (India)], E-mail: drrafiquee@gmail.com; Saxena, Nidhi; Khan, Sadaf [Department of Applied Chemistry, Corrosion Research Laboratory, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh 202002 (India); Quraishi, M.A. [Department of Applied Chemistry, IT-BHU Banaras Hindu University (India)

    2008-02-15

    The corrosion inhibition characteristics of 2-aminophenyl-5-mercapto-1-oxa-3,4-diazole (AMOD) on mild steel in HCl solution have been studied by weight loss studies and potentiodynamic polarization. AMOD is a good corrosion inhibitor in HCl solution and its inhibition efficiency is increased markedly in presence of surfactants (SDS, CTAB, TX-100). TX-100 is found to be most effective among the tested surfactants. Weight loss measurements showed that the inhibition efficiency increased with the increasing surfactant concentration and attained a maximum value around 0.2 mol dm{sup -3}. In presence of surfactant, the adsorption of AMOD on the mild steel surface obeyed Langmuir's adsorption isotherm. The influence of inhibitor concentration, solution temperature, and acid concentration on the corrosion rate of mild steel has also been investigated. The deduced thermodynamic parameters for adsorption reveal a strong interaction between the inhibitor and mild steel surface. The negative values of G{sub ads} indicate the spontaneous adsorption of inhibitors on the mild steel surface. Potentiodynamic polarization studies show that these surfactants are mixed-type inhibitors.

  9. Inhibition of acid corrosion of steel by some S-alkylisothiouronium iodides

    Energy Technology Data Exchange (ETDEWEB)

    Arab, S.T.; Noor, E.A. (Girl' s Coll. of Education, Jeddah (Saudi Arabia))

    1993-02-01

    Five selected S-alkylisothisothiouronium iodides have been studied as acid corrosion inhibitors at 30 C for steel in 0.5 M H[sub 2]SO[sub 4] using gasometry, mass loss, and direct current (DC) polarization techniques. All of the data reveal that the compounds act as inhibitors in the acid environments; furthermore, polarization curves show that the compounds act as mixed-type inhibitors. It was found that the inhibition efficiency increases with the increase of the length of the additive alkyl chain. Langmuir's adsorption isotherms fit the experimental data for the studied compounds. Thermodynamic parameter were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 30 to 70 C. It was observed that the activation energy is slightly increased with the increase of the additive alkyl chain. On the other hand, the sudden large increase of the inhibition behavior of S-hexylisothiouronium iodide was attributed to a different adsorption process.

  10. 注水介质中喹啉缓蚀剂对管线钢的缓蚀作用研究%Research on Corrosion Inhibition Effect of Quinoline Inhibitor in Injection Water Media on Pipeline Steel

    Institute of Scientific and Technical Information of China (English)

    张颖; 董国强; 胡凌艳

    2015-01-01

    ABSTRACT:Objective To investigate the growth pattern of quinoline adsorption film on X70 steel surface in the context that the injection water with corrosion inhibitors can effectively prevent the oil devices from corrosion and the film formed on the pipeline surface can alleviate the injection water corrosion. Methods The data obtained from scratch test were calculated using high field ion conduction model by potentiostatic rapid scratch method. Results The results showed that the high field ion conduction model was only applicable for a part of adsorbing process of quinoline. The mathematic simulation by further function fitting found that the growth pattern of quinoline adsorption film on X70 steel surface in simulated media followed the equation: J(t)=C1exp(-αt)+C2 exp(-βt)+C0 . Conclusion At the concentration of 0. 3%, 0. 6% ( mass fraction) quinoline, current fluctuated obviously and the stability of the forming film was worse. There was a possibility of local corrosion in scratch area. At the concentration of 0. 9%(mass fraction) quinoline, the goodness of fit between the simulated curve and the true current decay curve reached 0. 9983, the current fluctuated slightly and the stability of inhibitor adsorption film was better. In the injection water media, the content of quin-oline was higher, the quality of the forming film was better and the difference of the current density was smaller before and after scratch. The growth state of the adsorption film on the scratch surface and no-scratch surface were in a consistent state. The quino-line adsorption film could rapidly form on the damaged steel surface at the higher concentration which had a quick and overall pro-tective effect for the sample.%目的:在注水介质中加入喹啉缓蚀剂可有效防止石油设备的腐蚀,注水管表面形成的钝化膜可减小注水介质的腐蚀,研究喹啉缓蚀剂在X70钢表面的吸附膜的生长规律。方法采用恒电位快速划伤法,利用高场

  11. Corrosion Inhibiting Mechanism of Nitrite Ion on the Passivation of Carbon Steel and Ductile Cast Iron for Nuclear Power Plants

    Directory of Open Access Journals (Sweden)

    K. T. Kim

    2015-01-01

    Full Text Available While NaNO2 addition can greatly inhibit the corrosion of carbon steel and ductile cast iron, in order to improve the similar corrosion resistance, ca. 100 times more NaNO2 addition is needed for ductile cast iron compared to carbon steel. A corrosion and inhibition mechanism is proposed whereby NO2- ion is added to oxidize. The NO2- ion can be reduced to nitrogen compounds and these compounds may be absorbed on the surface of graphite. Therefore, since nitrite ion needs to oxidize the surface of matrix and needs to passivate the galvanic corroded area and since it is absorbed on the surface of graphite, a greater amount of corrosion inhibitor needs to be added to ductile cast iron compared to carbon steel. The passive film of carbon steel and ductile cast iron, formed by NaNO2 addition showed N-type semiconductive properties and its resistance, is increased; the passive current density is thus decreased and the corrosion rate is then lowered. In addition, the film is mainly composed of iron oxide due to the oxidation by NO2- ion; however, regardless of the alloys, nitrogen compounds (not nitrite were detected at the outermost surface but were not incorporated in the inner oxide.

  12. A Revisit to the Corrosion Inhibition of Aluminum in Aqueous Alkaline Solutions by Water-Soluble Alginates and Pectates as Anionic Polyelectrolyte Inhibitors

    Directory of Open Access Journals (Sweden)

    Refat Hassan

    2013-01-01

    Full Text Available The corrosion behavior of aluminum (Al in alkaline media in presence of some natural polymer inhibitors has been reinvestigated. The inhibition action of the tested inhibitors was found to obey both Langmuir and Freundlich isotherms models. The inhibition efficiency was found to increase with increasing the inhibitors concentration and decrease with increasing the temperature, suggesting physical adsorption mechanism. Factors such as the concentration and geometrical structure of the inhibitor, concentration of the corrosive medium, and temperature affecting the corrosion rates were examined. The kinetic parameters were evaluated, and a suitable corrosion mechanism consistent with the kinetic results obtained is suggested and discussed.

  13. The Corrosion and Preservation of Iron Antiques.

    Science.gov (United States)

    Walker, Robert

    1982-01-01

    Discusses general corrosion reactions (iron to rust), including corrosion of iron, sulfur dioxide, chlorides, immersed corrosion, and underground corrosion. Also discusses corrosion inhibition, including corrosion inhibitors (anodic, cathodic, mixed, organic); safe/dangerous inhibitors; and corrosion/inhibition in concrete/marble, showcases/boxes,…

  14. Corrosion-Activated Micro-Containers for Environmentally Friendly Corrosion Protective Coatings

    Science.gov (United States)

    Li, Wenyan; Buhrow, J. W.; Zhang, X.; Johnsey, M. N.; Pearman, B. P.; Jolley, S. T.; Calle, L. M.

    2016-01-01

    This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry. The NASA Kennedy Space Centers Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion

  15. Probability density fittings of corrosion test-data: Implications on C6H15NO3 effectiveness on concrete steel-rebar corrosion

    Indian Academy of Sciences (India)

    Joshua Olusegun Okeniyi; Idemudia Joshua Ambrose; Stanley Okechukwu Okpala; Oluwafemi Michael Omoniyi; Isaac Oluwaseun Oladele; Cleophas Akintoye Loto; Patricia Abimbola Idowu Popoola

    2014-06-01

    In this study, corrosion test-data of steel-rebar in concrete were subjected to the fittings of the Normal, Gumbel and the Weibull probability distribution functions. This was done to investigate the suitability of the results of the fitted test-data, by these distributions, for modelling the effectiveness of C6H15NO3, triethanolamine (TEA), admixtures on the corrosion of steel-rebar in concrete in NaCl and in H2SO4 test-media. For this, six different concentrations of TEA were admixed in replicates of steel-reinforced concrete samples which were immersed in the saline/marine and the microbial/industrial simulating test-environments for seventy-five days. From these, distribution fittings of the non-destructive electrochemical measurements were subjected to the Kolmogorov–Smirnov goodness-of-fit statistics and to the analyses of variance modelling for studying test-data compatibility to the fittings and testing significance. Although all fittings of test-data followed similar trends of significant testing, the fittings of the corrosion rate test data followed the Weibull more than the Normal and the Gumbel distribution fittings, thus supporting use of the Weibull fittings for modelling effectiveness. The effectiveness models on rebar corrosion, based on these, identified 0.083% TEA with optimal inhibition efficiency, $\\eta =$ 72.17 ± 10.68%, in NaCl medium while 0.667% TEA was the only admixture with positive effectiveness, $\\eta =$ 56.45±15.85%, in H2SO4 medium. These results bear implications on the concentrations of TEA for effective corrosion protection of concrete steel-rebar in saline/marine and in industrial/microbial environments.

  16. Corrosion inhibition by leaves and stem extracts of Sida acuta for mild steel in 1 M H2SO4 solutions investigated by chemical and spectroscopic techniques

    Directory of Open Access Journals (Sweden)

    S.A. Umoren

    2016-09-01

    Full Text Available Corrosion inhibition of mild steel in 1 M H2SO4 by leaves and stem extracts of Sida acuta was studied using chemical (weight loss and hydrogen evolution and spectroscopic (AAS, FTIR and UV-V techniques at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. The inhibition efficiency increases with increase in concentration of the extracts but decrease with rise in temperature. Inhibitive effect was afforded by adsorption of the extracts’ components which was approximated by Freundlich adsorption isotherm. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency and also from spectroscopic results.

  17. Temperature dependence of corrosion inhibition of steels used in oil well stimulation using acetylenic compound and halide ion salt mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Menezes, M.A.M. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica], E-mail: marcom@eq.ufrj.br; Valle, M.L.M. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica. Dept. de Processos Organicos; Dweck, J. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica. Dept. de Processos Inorganicos; Queiroz Neto, J.C. [Petroleo Brasileiro S.A. (CENPES / PETROBRAS), Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2007-07-15

    Halogenated salt (HS)-acetylenic compound (AC) mixtures were tested as corrosion inhibitors of 13Cr and 22Cr stainless steel and N80 and P110 carbon steel when exposed to 15 wt.% HCl solutions, at 50 deg C, 80 deg C and 100 deg C. The best corrosion inhibition efficiency is obtained when the concentration of both AC and HS is 1.5 wt. %, which indicates the use of all tested steels in oil well stimulation operated at 50 deg C and the use of 13Cr, N80 and P110 steels in oil well processing temperatures up to 100 deg C. (author)

  18. Inhibition of La-Fe-Co-Si compound corrosion in distilled water by sodium molybdate and disodium hydrogen phosphate

    Institute of Scientific and Technical Information of China (English)

    ZHANG Min; YE Rongchang; LONG Yi; CHANG Yongqin

    2011-01-01

    A comparative study of Na2MoO4·2H2O and Na2HPO4·12H2O as inhibitors for magnetic refrigeration material La-Fe-Co-Si comments were applied to study the corrosion behavior of the compound in the absence or presence of different concentrations of these inhibitors studied compounds acted as anodic inhibitors. The potential of zero charge (PZC) of La-Fe-Co-Si compound was determined in distilled water in the absence of the studied inhibitors. Corrosion inhibition mechanisms for inhibitors were proposed in this work.

  19. Titanium corrosion in alkaline hydrogen peroxide environments

    Science.gov (United States)

    Been, Jantje

    1998-12-01

    The corrosion of Grade 2 titanium in alkaline hydrogen peroxide environments has been studied by weight loss corrosion tests, electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR) measurements and potentiodynamic polarography. Calcium ions and wood pulp were investigated as corrosion inhibitors. In alkaline peroxide, the titanium corrosion rate increased with increasing pH, temperature, and hydrogen peroxide concentration. The corrosion controlling mechanism is thought to be the reaction of the oxide with the perhydroxyl ion. No evidence of thermodynamically stable calcium titanate was found in the surface film of test coupons exposed to calcium-inhibited alkaline peroxide solutions. Calcium inhibition is probably the result of low local alkali and peroxide concentrations at the metal surface produced by reaction of adsorbed calcium with hydrogen peroxide. It has been shown that the inhibiting effect of calcium is temporary, possibly through an effect of calcium on the chemical and/or physical stability of the surface oxide. Pulp is an effective and stable corrosion inhibitor. Raising the pulp concentration decreased the corrosion rate. The inhibiting effect of pulp may be related to the adsorption and interaction of the pulp fibers with H 2O2, thereby decreasing the peroxide concentration and rendering the solution less corrosive. The presence of both pulp and calcium led to higher corrosion rates than obtained by either one inhibitor alone. Replacement of hydrofluoric acid with alkaline peroxide for pickling of titanium was investigated. Titanium corrosion rates in alkaline peroxide exceeded those obtained in the conventional hydrofluoric acid bath. General corrosion was observed with extensive roughening of the surface giving a dull gray appearance. Preferred dissolution of certain crystallographic planes was investigated through the corrosion of a titanium single crystal. Whereas the overall effect on the corrosion rate was small

  20. Effect of Ca2+ and Mg2+ on CO2 Corrosion Behavior of Tube Steel

    Institute of Scientific and Technical Information of China (English)

    ZHAO Guo-xian; LI Jian-ping; HAO Shi-ming; L(U) Xiang-hong; LI He-lin

    2005-01-01

    Effects of Ca2+ and Mg2+ on the CO2 corrosion behaviors of tube steel were studied in simulated oil-fieldenvironment. The influence of Ca2+ and Mg2+ on the corrosion rate and morphologies of corrosion product layerwas determined by scanning electron microscope and measuring mass loss. Potentiodynamic polarization and im-pedance spectroscopy were used to investigate the change of electrochemical characteristic parameters of corrosionproduct layer and corrosion dynamic process. The results show that with Ca2+ and Mg2+ in electrolyte, the mor-phologies and microstructures of corrosion product layer changed obviously, thus affecting the corrosion process.

  1. Use of chlorine dioxide in a secondary recovery process to inhibit bacterial fouling and corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Knickrehm, M.; Caballero, E.; Romualdo, P.; Sandidge, J.

    1987-01-01

    A major oil company operates a secondary recovery waterflood in Inglewood, California. The waterflood currently processes 250,000 bbls. per day of produced fluid. The major economic and operational problems associated with a secondary recovery waterflood are: 1) corrosion due to oxygen, carbon dioxide, hydrogen sulfide, and bacteria (sulfate reducers and slime biomass), 2) plugging from deposits due to salts, sulfides, and biofilms. These problems lead to deterioration of water handling equipment, injection lines (surface and subsurface), and decreased water quality resulting in the plugging of injection wells. During the last 8 years the operator has used varying mechanical and chemical technology to solve these problems. From 1978 to 1982 traditional chemical programs were in effect. Over this time period there was a continuing decline in water quality, and a substantial increase in chemical and operational costs. It was determined at that time that the major reason for this was due to microbiological activity. With this in mind, the operator proceeded to test the effects of using Aqueous Chlorine Dioxide in one portion of their water handling facilities. Due to the success of the program it was applied field wide. Presently, the primary problems associated with bacteria have been arrested. Solving one corrosion problem can lead to the onset of another. The operator is now in the process of making a concentrated effort to eliminate the other synergistically related corrosive and plugging agents (O/sub 2/, CO/sub 2/, H/sub 2/S). A field history of the problems, findings, and solutions, are discussed along with an overview of our present direction.

  2. Inhibition of corrosion of carbon steel in well water by L-Lysine – Zn2+system

    Directory of Open Access Journals (Sweden)

    J.AngelinThangakani

    2016-08-01

    Full Text Available The environmental friendly inhibitor system L-Lysine-Zn2+, has been investigated by weight loss method. A synergistic effect exists between L-Lysine and Zn2+ system. The formulation consisting of 250 ppm of L-Lysine and 50 ppm of Zn2+ offers good inhibition efficiency of 98%.Polarization study reveals that this formulation functions as anodic inhibitor. AC impedance spectra reveal that a protective film is formed on the metal surface. The FTIR spectra study leads to the conclusion that the Fe2+ - L-Lysine complex formed on anodic sites of the metal surface controlled the anodic reaction and Zn(OH2 formed on the cathodic sites of the metal surface controlling the cathodic reaction. UV and Fluorescence spectrum study reveals the metal film formed on the solution containing 250 ppm of L-Cysteine and 50 ppm of Zn2+.The morphology of the metal is studied by AFM images. A suitable mechanism of corrosion inhibition is proposed based on the results obtained from weight loss study and surface analysis technique. Synergism parameters have been calculated. They are found to be greater than 1 suggesting that a synergistic effect exists between L-Lysine and –Zn2+

  3. Effect of silty sand with different sizes on corrosion behavior of 3Cr steel in CO2 aqueous environment

    Science.gov (United States)

    Liu, Wei; Lu, Songle; Zhang, Peng; Dou, Juanjuan; Zhao, Qinghe

    2016-08-01

    Corrosion behavior of 3Cr steel in CO2 aqueous environment containing silty sand was investigated by immersion test. The results show that CO2 corrosion rate and morphology of 3Cr steel were obviously affected by the size of silty sand. 5000 mesh silty sand mixed with corrosion products, forming compact Cr-rich corrosion scale and resulting in low corrosion rate and uniform corrosion. 1000 mesh silty sand mixed with corrosion products, forming porous corrosion scale without Cr enrichment and resulting in high corrosion rate and pitting corrosion. 5000 mesh silty sand enhanced Cr enrichment in corrosion scale, leading to low anodic current. However, 1000 mesh silty sand deteriorated Cr enrichment in corrosion scale, leading to high anodic current. Cathodic current was reduced by silty sand, but was not affected by two sizes of silty sand. Cr enrichment in corrosion scale of 3Cr steel was obviously affected by separation effect of silty sand.

  4. Correlation between electronic parameters and corrosion inhibition of benzothiazole derivatives- NMR parameters as important and neglected descriptors

    Science.gov (United States)

    Behzadi, Hadi; Forghani, Ali

    2017-03-01

    The relation between electronic properties and corrosion inhibitive performance of three benzothiazole derivatives 1,3-benzothiazol-2-amine (BTA), 6-methyl-1,3-benzothiazol-2-amine (MBTA) and 2-amino-1,3-benzthiazole-6-thiol (TBTA) has been investigated by density functional theory. The electronic properties including EHOMO, ELUMO and related parameters were calculated at the B3LYP/6-311++G(d,p) level. The chemical shielding CS tensors were introduced as important and neglected descriptors to evaluate inhibitive efficiency of corrosion inhibitors. Nuclear independent chemical shift (NICS) components, as an aromaticity criterion, were also investigated as local descriptor. Polarizability and CS descriptors, as second rank tensors, show the best correlations with inhibition efficiencies of studied inhibitors.

  5. 3%NaCl溶液中咪唑和苯并三唑对Cu缓蚀协同作用的研究%SYNERGISTIC EFFECTS BETWEEN BENZOTRIZOLE AND IMIDAZOLE IN CORROSION INHIBITION FOR COPPER IN 3% NaCl SOLUTION

    Institute of Scientific and Technical Information of China (English)

    张大全; 高立新

    2001-01-01

    采用失重法考察了3%NaCl溶液中咪唑和苯并三唑对Cu的缓蚀作用,结果表明100mg/L的咪唑对Cu的缓蚀率仅为47.7%,100mg/L的苯并三唑对Cu的缓蚀效率为73.2%,当70mg/L的咪唑和30mg/L的苯并三唑复配使用后,其缓蚀效率提高到94.3%,电化学极化曲线研究表明苯并三唑对Cu电极的阳极过程有抑制作用,咪唑对Cu电极的阴极过程有抑制作用,咪唑和苯并三唑的复配使用显著增加了对Cu电极阴极和阳极电化学过程的抑制作用%The efficiency of imidazole(IM) and benzotriazole(BTA) as corrosion inhibitors for copper in 3 % NaCl solution was investigated by weight-loss method. The inhibition efficiency of 100ppmIM for copper was only 47.7 %, while the inhibition efficiency of 100ppm BTA for copper was 73.2%. When 70ppm IM and 30ppm BTA were used as complex corrosion inhibitor, inhibition for copper was increased and reached at value of 94.3%. This was beneficial to reduce the deficiency of BTA for its toxicity. Electrochemical polarization curve shows that IM suppressed the cathodic reaction of copper. BTA had inhibition effect for the anodic reaction and the complex inhibitor of IM and BTAsuppressed both cathodic and anodic reactions. The molecular structure parameters of IM and BTAwere obtained via MM2 forcefield program and PPP-SCF quantum chemical calculation. The electron transfer between IM and BTA was aid to their adsorption and passivity on copper electrode surface.This resulted in the synergistic effects between IM and BTA, improving their protective ability for copper in 3% NaCl solution.

  6. Corrosion inhibitors in concrete. Part II: Effect on chloride threshold values for corrosion of steel in synthetic pore solutions

    Energy Technology Data Exchange (ETDEWEB)

    Mammoliti, L.; Hansson, C.M.; Hope, B.B.

    1999-10-01

    The effectiveness of four commercially available corrosion inhibitors for use in cement-based materials was assessed in synthetic concrete pore solution containing chlorides. The effect of the surface topography of the sample and the composition of the pore solution was also assessed. Although in a parallel study the inhibitors were observed to delay the onset of corrosion, in these tests in pore solution they were found to be ineffective in increasing the chloride threshold value of reinforcing steel exposed to chlorides and had little influence on the progression of corrosion once initiated. This suggests that chemical reactions within the cement phase are responsible for the observed results. Metallographically polished samples proved the most resistant to corrosion regardless of electrolyte composition and samples with all surface finishes exhibited lower resistance in solutions containing only calcium hydroxide than in the higher pH synthetic concrete pore solutions.

  7. Corrosion inhibition of carbon steel in the near neutral media by blends of tannin and calcium gluconate

    Energy Technology Data Exchange (ETDEWEB)

    Lahodny-Sarc, O.; Kapor, F. [Mining, Geology and Petrol. Eng. Dept., Univ. of Zagreb (Croatia)

    2002-04-01

    The efficiency of tannin/calcium gluconate blends, as corrosion inhibitors for carbon steel in near neutral water media, have been studied. Synergistic behaviour of two components blend of different concentrations has been demonstrated in solutions prepared with distilled and a tap water. The anodic character of the inhibitor was recognised by the shift of corrosion potential to more positive values and a decrease of the passivation current on potentiodynamic polarisation curves. The cathodic inhibition was also recognised by slowing down the cathodic current of the polarisation run. Soluble iron tannate chelate has been observed as a dark blue flux flowing down from the metal surface into solution of tannin in the tap water, resulting in a corrosion process. Tannin decreases the pH of tap water. Calcium gluconate added in tannin solutions increases the pH maintaining it in the near neutral region enabling the precipitation of a low soluble protective iron tannate and metal gluconate. (orig.)

  8. Adsorption and inhibitive properties of a Schiff base for the corrosion control of carbon steel in saline water.

    Science.gov (United States)

    Samide, Adriana; Tutunaru, Bogdan

    2011-01-01

    A Schiff base, namely N-(2-hydroxybenzylidene) thiosemicarbazide (HBTC), was investigated as inhibitor for carbon steel in saline water (SW) using electrochemical measurements such as: potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The morphology of the surfaces before and after corrosion was examined by Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM/EDS). The results showed that HBTC acts as corrosion inhibitor in SW by suppressing simultaneously the cathodic and anodic processes via adsorption on the surface which followed the Langmuir adsorption isotherm; the polarization resistance (R(p)) and inhibition efficiency (IE) increased with each HBTC concentration increase. SEM/EDS analysis showed at this stage that the main product of corrosion is a non-stoichiometric amorphous Fe(3+) oxyhydroxide, consisting of a mixture of Fe(3+) oxyhydroxides, α-FeOOH and/or γ-FeOOH, α-FeOOH/γ-FeOOH and Fe(OH)(3).

  9. Inhibition of Staphylococcus aureus biofilm by a copper-bearing 317L-Cu stainless steel and its corrosion resistance.

    Science.gov (United States)

    Sun, Da; Xu, Dake; Yang, Chunguang; Chen, Jia; Shahzad, M Babar; Sun, Ziqing; Zhao, Jinlong; Gu, Tingyue; Yang, Ke; Wang, Guixue

    2016-12-01

    The present study investigated the antibacterial performance, corrosion resistance and surface properties of antibacterial austenitic 317L-Cu stainless steel (317L-Cu SS). After 4.5wt% copper was added to 317L stainless steel (317L SS), the new alloy underwent solid solution and aging heat treatment. Fluorescent staining using 4',6-diamidino-2-phenylindole (DAPI) revealed that the 317L-Cu SS showed strong antibacterial efficacy, achieving a 99% inhibition rate of sessile Staphylococcus aureus cells after 5days. The corrosion data obtained by potentiodynamic polarization curves indicated that in comparison with 317L SS, the pitting potential and corrosion current density of 317L-Cu slightly decreased due to the addition of Cu. The 317L-Cu SS exhibited no cytotoxicity against zebrafish (Danio rerio) embryos. The experimental results in this study demonstrated that the new alloy has potential applications in medical and daily uses.

  10. Effect of natural marine biofilms on galvanic corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Dexter, S.C.; LaFontaine, J.P. [Univ. of Delaware, Lewes, DE (United States)

    1998-11-01

    Galvanic corrosion of copper (UNS C11000), 1018 carbon steel (CS, UNS G10180), aluminum alloy 3003 (UNS A93003), and zinc (UNS Z32121) coupled to cathodes of UNS N08367 was tested with and without natural marine biofilms on the cathode surface. Weight losses were significantly higher, and corrosion currents were up to 2 decades higher with a biofilm on the cathode surface for anodes of copper, steel, and aluminum. There was no difference for zinc. Results showed an increase in consumption of the anodic material should be expected in any case where biofilms on the cathodic member of a galvanic couple result in a systematic and significant increase in reduction current at the mixed potential of the couple. Cathodic reduction currents (versus control with no biofilm) were increased at all potentials down to {approximately}{minus}900 mV{sub SCE}, resulting in an elevated current capacity capable of increasing the weight loss of anodic materials over a sustained period of at least 2 months. Biofilms, however, did not increase consumption of zinc anodes. Potentiodynamic polarization curves taken from the corroded samples were used successfully to predict the effect of biofilms on galvanic corrosion rates for the materials tested. Weight-loss values calculated by Faraday`s law using corrosion currents from the polarization curves agreed well with actual measured values for anodes of steel, aluminum, and zinc, although there were some discrepancies for copper.

  11. Improvement of corrosion resistance and antibacterial effect of NiTi orthopedic materials by chitosan and gold nanoparticles

    Science.gov (United States)

    Ahmed, Rasha A.; Fadl-allah, Sahar A.; El-Bagoury, Nader; El-Rab, Sanaa M. F. Gad

    2014-02-01

    Biocomposite consists of gold nanoparticles (AuNPs) and a natural polymer as Chitosan (CS) was electrodeposited over NiTi alloy to improve biocompatibility, biostability, surface corrosion resistance and antibacterial effect for orthopedic implantation. The forming process and surface morphology of this biocomposite coats over NiTi alloy were studied. The results showed that the nm-scale gold particles were embedded in the composite forming compact, thick and smooth coat. Elemental analysis revealed significant less Ni ion release from the coated NiTi alloy compared with the uncoated one by 20 fold. Furthermore, the electrochemical corrosion measurements indicated that AuNPs/CS composite coat was effective for improving corrosion resistance in different immersion times and at all pH values, which suggests that the coated NiTi alloys have potential for orthopedic applications. Additionally, the efficiencies of the biocomposite coats for inhibiting bacterial growth indicate high antibacterial effect.

  12. Effect of Sn on Corrosion Behavior of Ultra-pure 17 mass% Cr Ferritic Stainless Steels in Sulphuric Acid

    Institute of Scientific and Technical Information of China (English)

    Xiang-jun ZHANG; Fei GAO; Zhen-yu LIU

    2016-01-01

    The effect of Sn on corrosion behavior of ferritic stainless steels in 20 mass% H2 SO4 was investigated by alternating current and direct current electrochemical methods and gravimetric tests at 25 ℃.The results show that Sn can effectively improve general corrosion resistance of ferritic stainless steels in H2 SO4 ,mainly due to highly raised hydrogen evolution overpotential which is in favour of strong suppression of hydrogen evolution reaction,and inhibitive effect of dissolved Sn2+ on elementary anodic reactions.With increasing Sn content,the better corrosion re-sistance can be reached.The Electrochemical Impedance Spectroscopy (EIS)includes four time constants and can be perfectly fitted by equivalent circuit:Rs(CdlRct)(QadsRads(RL1(L1(RL2L2)))).

  13. The dual role of microbes in corrosion.

    Science.gov (United States)

    Kip, Nardy; van Veen, Johannes A

    2015-03-01

    Corrosion is the result of a series of chemical, physical and (micro) biological processes leading to the deterioration of materials such as steel and stone. It is a world-wide problem with great societal and economic consequences. Current corrosion control strategies based on chemically produced products are under increasing pressure of stringent environmental regulations. Furthermore, they are rather inefficient. Therefore, there is an urgent need for environmentally friendly and sustainable corrosion control strategies. The mechanisms of microbially influenced corrosion and microbially influenced corrosion inhibition are not completely understood, because they cannot be linked to a single biochemical reaction or specific microbial species or groups. Corrosion is influenced by the complex processes of different microorganisms performing different electrochemical reactions and secreting proteins and metabolites that can have secondary effects. Information on the identity and role of microbial communities that are related to corrosion and corrosion inhibition in different materials and in different environments is scarce. As some microorganisms are able to both cause and inhibit corrosion, we pay particular interest to their potential role as corrosion-controlling agents. We show interesting interfaces in which scientists from different disciplines such as microbiology, engineering and art conservation can collaborate to find solutions to the problems caused by corrosion.

  14. The dual role of microbes in corrosion

    Science.gov (United States)

    Kip, Nardy; van Veen, Johannes A

    2015-01-01

    Corrosion is the result of a series of chemical, physical and (micro) biological processes leading to the deterioration of materials such as steel and stone. It is a world-wide problem with great societal and economic consequences. Current corrosion control strategies based on chemically produced products are under increasing pressure of stringent environmental regulations. Furthermore, they are rather inefficient. Therefore, there is an urgent need for environmentally friendly and sustainable corrosion control strategies. The mechanisms of microbially influenced corrosion and microbially influenced corrosion inhibition are not completely understood, because they cannot be linked to a single biochemical reaction or specific microbial species or groups. Corrosion is influenced by the complex processes of different microorganisms performing different electrochemical reactions and secreting proteins and metabolites that can have secondary effects. Information on the identity and role of microbial communities that are related to corrosion and corrosion inhibition in different materials and in different environments is scarce. As some microorganisms are able to both cause and inhibit corrosion, we pay particular interest to their potential role as corrosion-controlling agents. We show interesting interfaces in which scientists from different disciplines such as microbiology, engineering and art conservation can collaborate to find solutions to the problems caused by corrosion. PMID:25259571

  15. Green corrosion inhibition of mild steel to aqueous sulfuric acid by the extract of Corchorus olitorius stems

    Science.gov (United States)

    Gobara, Mohamed; Zaghloul, Basem; Baraka, Ahmad; Elsayed, Mohamed; Zorainy, Mahmoud; Mokhtar Kotb, Mohamed; Elnabarawy, Hany

    2017-04-01

    Extract of Corchorus olitorius stems (ECS) was used as a green inhibitor for the inhibition of mild steel corrosion in 0.5 M H2SO4 solution. GC/MS was used for both qualitative and quantitative analysis of the extract. The corrosion performance of the extract was evaluated using electrochemical impedance spectroscopy, potentiodynamic polarization and weight loss. The results showed that ECS is a mixed-type inhibitor which reduces both anodic and cathodic reactions and the inhibition efficiency was reached up to 93%. Adsorption isotherm data was recorded at different temperatures and analyzed by selected adsorption isotherm models to reveal characteristics of inhibition. Thermodynamic calculations showed that the inhibition efficiency increases with increasing inhibitor concentration, and decreases with increasing temperature. Adsorption of ECS on the mild steel surface was found to be spontaneous and exothermic. Adsorption is suggested to be physisorption according to El-Awady isotherm model. Also, the scanning electron microscopy (SEM) was used to investigate the surface morphology to confirm the corrosion results.

  16. Effect of hydrogen on stress corrosion cracking of copper

    Institute of Scientific and Technical Information of China (English)

    Li-jie QIAO

    2008-01-01

    The effects of hydrogen on electrochemical behavior and susceptibility of stress corrosion cracking (SCC) of pure copper were studied. SCC susceptibility of pure copper in a 1 M NaNO2 solution was increased by pre-charged hydrogen. The effect of hydrogen on the sus-ceptibility is more obvious in the low stress region due to the longer fracture time, which resulted in a longer time for more hydrogen to diffuse toward the crack tip. Synergistic effects of hydrogen and stress on corrosion and SCC pro-cesses were discussed. The results showed that an inter-action between stress and hydrogen at the crack tip could increase the anodic dissolution rate remarkably.

  17. Effects of Chemical Treatments on Microbiologically Influenced Corrosion

    Science.gov (United States)

    Friedman, E. S.; Strom, M.; Dexter, S. C.

    2008-12-01

    Biofilms are known to have an effect on galvanic corrosion of alloys in seawater systems. In the Delaware Bay, biofilm formation on surface of cathodes has been shown to cause galvanic corrosion to occur up to 100 times more rapidly. Given the impacts that corrosion can have on structures, it is important to study how we can affect corrosion rates. One way of doing this is the application of chemical treatments to biofilms on metal samples. To investigate this, natural marine biofilms were grown on alloy 6XN stainless steel samples, and various chemical treatments were applied to discover their effects on open circuit potentials and corrosion currents. Another objective of this study was to determine if there was a threshold molecular weight above which molecules were unable to penetrate the biofilm. It was discovered that chemicals with molecular weights as high as 741.6 g/mol were able to penetrate at least some parts of the heterogeneous biofilm and reach the metal surface. No upper threshold value was found in this study. It was found that the reducing agents sodium L-ascorbate and NADH as well as the chelate ferizene caused a drop in open circuit potential of biofilmed 6XN samples. Also, glutaraldahyde, which is used as a fixative for bacteria, shifted the open circuit potential of biofilm samples in the noble direction but had no effect on the corrosion current. Sodium L- ascorbate was found to reach the metal surface, but in concentrations lower than those present in the bulk fluid. It was not determined in this study whether this was due to physical or chemical processes within the biofilm. A synergistic effect was observed when applying a mixture of ferizene and glutaraldahyde. It is thought that this was due to the death of the bacteria as well as the disruption of iron cycling in the biofilm. Finally, it was observed that NADH caused a reduction in current at potentials associated with iron reduction, leading us to believe that the iron was being reduced

  18. Corrosion Effects on the Strength Properties of Steel Fibre Reinforced Concrete Containing Slag and Corrosion Inhibitor

    OpenAIRE

    Sivakumar Anandan; Sounthararajan Vallarasu Manoharan; Thirumurugan Sengottian

    2014-01-01

    Corrosion in steel can be detrimental in any steel rebar reinforced concrete as well as in the case of steel fibre reinforced concrete. The process of corrosion occurring in steel fibre incorporated concrete subjected to corrosive environment was systematically evaluated in this study. Concrete specimens were prepared with steel fibre inclusions at 1.5% Vf (volume fraction) of concrete and were added in slag based concrete (containing manufactured sand) and replaced with cement at 20%, 40%, ...

  19. Adsorption and corrosion inhibition behavior of hydroxyethyl cellulose and synergistic surfactants additives for carbon steel in 1M HCl.

    Science.gov (United States)

    Mobin, Mohammad; Rizvi, Marziya

    2017-01-20

    The inhibitory effect of hydroxyethylcellulose (HEC) on A1020 carbon steel corrosion in 1M HCl solution was evaluated at different concentrations and temperatures using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), UV-vis spectrophotometry, scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDX), atomic force microscopy (AFM) and quantum chemical analysis. Inhibition efficiency was found to increase with increase in concentration of HEC but decreased with increasing temperature. Inhibitory effect of HEC mixed with minimal concentration of surfactants, triton X 100 (TX), cetyl pyridinium chloride (CPC) and sodium dodecyl sulfate (SDS) was also evaluated. HEC gets adsorbed onto the mild steel surface via mixed type adsorption. Ea, ΔH, ΔS and ΔG⁰ads, the thermodynamic and activation parameters, were calculated and discussed. Adsorption of inhibitor on the steel/solution interface follows Langmuir adsorption isotherm. EIS suggests formation of protective layer over the carbon steel surface. Results of different experimental techniques pertaining to the inhibitory effect of HEC and HEC mixed with surfactants are in good agreement with theoretical quantum chemical investigation.

  20. Corrosion Inhibition Of Mild Steel In 0.5 M H2so4 By 1-(2- Methyl-4-(2-Methylphenyldiazenyl Phenyl Azonapthalen-2-Ol

    Directory of Open Access Journals (Sweden)

    S.ANANTH KUMAR

    2013-09-01

    Full Text Available The effect of addition of1-(2-methyl-4-(2-methylphenyldiazenyl phenyl azonapthalen-2-ol on the corrosion of steel in 0.5M H2SO4 acid has been studied by weight loss measurements, potentiodynamic polarization and Electrochemical Impedance Spectroscopy (EIS measurements. The inhibition efficiency was found to increase with inhibitors content to attain 61.00% and 79.66% 1-(2-methyl-4-(2-methylphenyldiazenyl phenyl azonapthalen-2-ol and 25ppm(Tetra butyl ammonium bromideTBAB respectively. Data obtained from EIS studies were analyzed to determinate the model inhibition process through appropriate equivalent circuit models. Inhibition efficiency E (% obtained from the various methods is in good agreement.

  1. Inhibitor effects of sodium benzoate on corrosion resistance of Al6061-B4C composites in NaCl and H3BO3 solutions

    Science.gov (United States)

    Rafi-ud-din; Shafqat, Q. A.; Shahzad, M.; Ahmad, Ejaz; Asghar, Z.; Rafiq, Nouman; Qureshi, A. H.; Syed, Waqar adil; asim Pasha, Riffat

    2016-12-01

    Sodium benzoate (SB) is used for the first time to inhibit the corrosion of Al6061-B4C composites in H3BO3 and NaCl solutions. Al6061100-x -x wt% B4C (x = 0, 5, and 10) composites are manufactured by a powder metallurgy route. The corrosion inhibition efficiency of SB is investigated as a function of the volume fractions of B4C particles by using potentiodynamic polarization and electrochemical impedance techniques. Without the use of an inhibitor, an increase of the B4C particles in the composite decreases the corrosion resistance of Al6061-B4C composites. It is found that SB is an efficient corrosion inhibitor for Al6061-B4C composites in both investigated solutions. The corrosion inhibition efficiency of SB increases with an increase in B4C content. Since SB is an adsorption type inhibitor, it is envisaged that an extremely thin layer of molecules adsorbs onto the surface and suppresses the oxidation and reduction. It is found that the inhibitor effect of SB is more pronounced in a H3BO3 environment than in NaCl solution. Further, the mechanism of corrosion inhibition by SB is illustrated by using optical and scanning electron microscopy of corroded samples. It is found that the adsorption of benzoate ions on the Al surface and its bonding with Al3+ ions forms a hydrophobic layer on top of the exposed Al surface, which enhances the protection against dissolved boride ions.

  2. Synergistic Inhibition Effect of Zinc Nitrate, Sodium Molybdate and Tripolyphosphate on Corrosion of 1 Cr18 Ni9 Ti Stainless Steel%Zn(NO3)2·6H2O,Na2MoO4·2H2O与Na5P3O10对1 Cr18 Ni9 Ti的协同缓蚀作用

    Institute of Scientific and Technical Information of China (English)

    罗源军; 罗源兵; 刘波; 吕太勇; 张建新

    2015-01-01

    Objective To investigate the synergistic inhibition effect of zinc nitrate, sodium molybdate and tripolyphosphate and make the property of these inhibitors to complement each other. Methods Based on acidic potassium permanganate solution, the synergistic inhibitive effect of zinc nitrate, sodium molybdate and tripolyphosphate on corrosion of 1Cr18Ni9Ti stainless steel was investigated by means of polarization curve and weight loss method. Results Zinc nitrate and tripolyphosphate could mainly inhibit the cathodic process of 1Cr18Ni9Ti stainless steel, while sodium molybdate mainly suppressed its anodic reaction. Since zinc ni-trate and sodium molybdate had significantly antagonism with each other, the effectiveness of corrosion inhibition became poor. These three corrosion inhibitors exhibited a good synergistic effect after tripolyphosphate was added, which lead to the optimal per-formance of the overall effectiveness of inhibitors and the efficiency of corrosion inhibitor could reach higher than 90%. Conclusion There was a good synergistic effect among zinc nitrate, sodium molybdate and tripolyphosphate in corrosion inhibition of metals. The corrosion rate of 1Cr18Ni9Ti stainless steel could be significantly reduced in acidic potassium permanganate solution and the life of the equipment could be extended.%目的:研究硝酸锌、钼酸钠及三聚磷酸钠之间的协同缓蚀作用机理,使其在性能上实现互补。方法以酸性高锰酸钾溶液为基础,通过极化曲线和失重法实验,研究3种缓蚀剂对1 Cr18 Ni9 Ti奥氏体不锈钢的协同缓蚀作用。结果硝酸锌和三聚磷酸钠以抑制不锈钢的阴极反应为主,钼酸钠则主要抑制不锈钢的阳极反应。硝酸锌与钼酸钠表现出明显的拮抗作用,导致缓蚀效果变差。只有当三聚磷酸钠加入后,三者之间才表现出了良好的协同作用,使总的缓蚀性能达到最优,复配后的缓蚀效率可以达到90%以上。结论

  3. EFFECT OF CHLORIDE ON THE ATMOSPHERIC CORROSION OF SIMULATED ARTIFACT IRON IN NO3-BEARING POLLUTANT ENVIRONMENT

    Institute of Scientific and Technical Information of China (English)

    X. Cao; C.C. Xu

    2006-01-01

    The effect of chloride in nitrogen-bearing pollutant on the atmospheric corrosion of cast iron was investigated by using periodic wet-dry test, electrochemical experiment and surface tension test.Scanning electron microscopy (SEM) with energy disperse atomic X-ray (EDAX) was used to identify the corrosion processes and products. The results of the weight loss measurement showed that the whole corrosion kinetics can be approximately described by: AW=AtB. With the addition of NaC1, B increases. The result presented that Cl- accelerated the corrosion rate obviously during the whole corrosion process. The initial corrosion process was investigated from the viewpoint of surface tension. At the initial corrosion period, the corrosion rate was proportion to the adsorption of anions contained the solutions. And as corrosion went on, the penetration effect of anions and different characteristics of the corrosion products began to dominant the corrosion process, which led to the accelerated effect.

  4. Inhibition of corrosion of mild steel in acid media by N′-benzylidene-3-(quinolin-4-ylthio)propanohydrazide

    Indian Academy of Sciences (India)

    V Ramesh Saliyan; Airody Vasudeva Adhikari

    2008-08-01

    In the present investigation a new corrosion inhibitor, N′-(3,4-dihydroxybenzylidene)-3-{[8-(trifluoromethyl) quinolin-4-yl]thio}propanohydrazide(DHBTPH) was synthesized, characterized and tested as a corrosion inhibitor for mild steel in HCl (1 M, 2 M) and H2SO4 (0.5 M, 1 M) solutions using weight-loss method, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization methods. The corrosion inhibition efficiency measured by all the above three techniques were in good agreement with each other. The results showed that DHBTPH is a very good inhibitor for mild steel in acidic media. The inhibition efficiency in different acid media was found to be in the decreasing order 0.5 M H2SO4 > 1 M HCl > 1 M H2SO4 > 2 M HCl. The inhibition efficiency increases with increasing inhibitor concentration and with increasing temperature. It acts as an anodic inhibitor. Thermodynamic and activation parameters are discussed. Adsorption of DHBTPH was found to follow the Langmuir’s adsorption isotherm. Chemisorption mechanism is proposed. The mild steel samples were also analysed by scanning electron microscopy (SEM).

  5. Corrosion Inhibition Performance of Lignin Extract of Sun Flower (Tithonia Diversifolia on Medium Carbon Low Alloy Steel Immersed in H2SO4 Solution

    Directory of Open Access Journals (Sweden)

    Kenneth K. ALANEME

    2012-08-01

    Full Text Available The inhibition potentials of lignin extract of sun flower was investigated by evaluating the corrosion behaviour of medium carbon low alloy steel immersed in 1M H2SO4 solution containing varied concentration of the extract. Mass loss, corrosion rate, and adsorption characterization were utilized to evaluate the corrosion inhibition and adsorption properties of the extract. The results revealed that the lignin extract is an efficient inhibitor of corrosion in mild steel immersed in 1M H2SO4. The corrosion rates were observed to decrease with increase in concentration of lignin extract but increase with temperature. The activation energies and the negative free energy of adsorption obtained from the adsorption studies indicate that the lignin extract is physically adsorbed on the surface of the steel and that the adsorption is strong, spontaneous and fit excellently with the assumptions of the Langmuir adsorption isotherm.

  6. Effects of Phyllanthus muellerianus Leaf-Extract on Steel-Reinforcement Corrosion in 3.5% NaCl-Immersed Concrete

    Directory of Open Access Journals (Sweden)

    Joshua Olusegun Okeniyi

    2016-10-01

    Full Text Available This paper investigates Phyllanthus muellerianus leaf-extract effects on steel-reinforcement corrosion in concrete immersed in 3.5% NaCl, simulating saline/marine environment. Different concentrations of the leaf-extract were admixed in steel-reinforced concrete samples, which were immersed, with normal control, in the test-environment, while positive control samples were immersed in distilled water. Electrochemical measurements of corrosion-rate (by linear-polarization-resistance instrument, corrosion-current (by zero-resistance-ammeter and corrosion-potential (by high impedance multimeter were obtained for assessing the reinforcing-steel corrosion. Analyzed results showed that the corrosion-rate exhibited excellent correlation (R = 98.82%, Nash-Sutcliffe Efficiency = 97.66%, ANOVA p-value = 0.0006 with function of the admixture concentration and of the corrosion noise-resistance (ratio of corrosion-potential and corrosion-current standard deviations. The 0.3333% Phyllanthus muellerianus (per weight of cement exhibited optimal efficiency, η = 97.58% ± 1.28% (experimental or 95.33% ± 4.25% (predicted, at inhibiting concrete steel-reinforcement corrosion in the test-environment, which compares well with the positive control performance model, η = 97.96% ± 0.03%. The experimental and predicted models followed the Langmuir adsorption isotherm, which indicated physisorption as the Phyllanthus muellerianus leaf-extract adsorption mechanism on the reinforcing-steel. These support suitability of the N-, S-, and O-containing and π-electron rich Phyllanthus muellerianus leaf-extract as an environmentally-friendly inhibitor for effective corrosion-protection of steel-reinforcement in concrete designed for the saline/marine environment.

  7. Inhibition of the corrosion process of alloy AA5083 (Al-Mg) in seawater by cerium cations. An EIS study

    Energy Technology Data Exchange (ETDEWEB)

    Aballe, A.; Bethencourt, M.; Botana, F.J.; Cano, M.J. [Cadiz Univ. (Spain). Dept. de Ciencia de los Materiales e Ingenieria Metalurgica y Quimica Inorganica; Marcos, M. [Cadiz Univ. (Spain). Dept. de Ingenieria Mecanica y Diseno Industrial

    2001-05-01

    The principal corrosion process of the alloy AA5083 in aerated NaCl solutions mainly affects the zones occupied by Al(Mn,Fe,Cr) cathodic precipitates, over which the oxygen reduction reaction takes place. Thus, the design of an effective protection system could be based on the use of cathodic inhibitors. In previous papers, the inhibition efficiency of various lanthanide chlorides, particularly CeCl{sub 3}, has been proved. These compounds act as cathodic inhibitors, blocking these cathodic sites by means of the precipitation of a lanthanide oxide or hydroxide film. In this paper, EIS has been used to detect the blocking effect of the cathodic sites. This fact is reflected in the electrical response of the system through the minimisation of the values of those elements of the electrical loop that are related to the response of the cathodic intermetallics. In addition, the dielectric properties of the anodic film have been evaluated by measuring the value of the associated capacitance. From these values, it can be concluded that the thickness of the film produced over the matrix when the inhibitor is added is much lower than that produced in the bare solution. This finding is in good agreement with the results obtained with other techniques and may be related to the minimisation of the anodic reaction as a consequence of the decrease in the intensity of the cathodic process by the action of CeCl{sub 3}. (orig.)

  8. 月桂基咪唑啉对银的缓蚀性能研究%Performance of lauryl imidazoline in the corrosion inhibition of silver

    Institute of Scientific and Technical Information of China (English)

    王菊琳; 栾莉; 李沫; 张治国; 马清林

    2012-01-01

    A lauryl imidazoline ( LM) has been synthesized and the structure was characterized by Fourier transform in frared (FT-IR) spectroscopy. The corrosion inhibition ability of LM was studied in Na2S corrosion medium for silver samples which based on composition of the Emperor Asoka Pagoda substrate by pre-filming, gravimetric method, potentiodynamic method and electrochemical impedance spectroscopy. In addition, the corrosion inhibition ability of LM was compared with those of benzotriazole ( BTA ) and l-phenyl-5-mercaptotetrazole( PMTA) , which were commonly used corrosion inhibitors in the field of silver heritage conservation. Compared with bare silver samples, the inhibition ratio of prefilmed silver samples by 1% LM was 59. 1% in 5 mg/L Na2S corrosion medium; the corrosion current density ic decreased by 0. 111 μA/cm and the electrical double-layer capacitance Cd decreased by 51. 39 μF/cm2 ; Meanwhile, the electrochemical impedance Rt increased by 73. 5 kΩ·cm2 ; Comparison of the corrosion inhibition effect for LM with those for BTA and PMTA, showed that the inhibition rate 77 for silver decreased in the order ηPMTA > ηLM > ηBTA, as confirmed by the results of gravimetric method, potentiodynamic method and electrochemical impedance spectroscopy.%合成了月桂基咪唑啉(LM),并采用FT-IR对LM进行结构表征.以南京长干寺遗址地宫出土的阿育王塔的银基体模拟样品为试样,通过预膜法、重量法、动电位扫描法、电化学交流阻抗法研究了LM对银试样在Na2S腐蚀介质中的缓蚀性能,并与银质文物上常用的含氮类缓蚀剂苯骈三氮唑(BTA)、含硫类缓蚀剂1-苯基-5-巯基四氮唑(PMTA)在Na2S腐蚀介质中的缓蚀效果进行了比较.结果表明,与裸银试样相比,经质量分数为1% LM预膜处理后的银试样在5mg/L Na2S溶液中的缓蚀率为59.1%;自腐蚀电流密度ic减小了0.111 μA/cm2,电化学体系的双电层电容Cd降低了51.39 μF/cm2,

  9. Influence of silver additions to type 316 stainless steels on bacterial inhibition, mechanical properties, and corrosion resistance

    DEFF Research Database (Denmark)

    Chiang, Wen-Chi; Tseng, I-Sheng; Møller, Per;

    2010-01-01

    techniques. The microstructure of these 316 stainless steels was examined, and the influences of silver additions to 316 stainless steels on bacterial inhibition, mechanical properties, and corrosion resistance were investigated. This study suggested that silver-bearing 316 stainless steels could be used......Bacterial contamination is a major concern in many areas. In this study, silver was added to type 316 stainless steels in order to obtain an expected bacteria inhibiting property to reduce the occurrence of bacterial contamination. Silver-bearing 316 stainless steels were prepared by vacuum melting...

  10. Analyzing the effect of high repetition laser shock peening on dynamic corrosion rate of magnesium

    Science.gov (United States)

    Caralapatti, Vinodh Krishna; Narayanswamy, Sivakumar

    2017-08-01

    Magnesium as implant material is being investigated extensively due to its superior suitability. With corrosion rate being the major obstacle, this paper aims to determine the effects of high repetition laser shock peening (HRLSP) on the dynamic corrosion rate of magnesium. While there is lot of research on corrosion of magnesium, in this work, a specially designed test bench was used for characterization of dynamic corrosion to mimic the physiological conditions experienced by the implant inside human body. From the results, it can be inferred that corrosion rate of peened samples reduced by at least 6 times compared to unpeened sample and sample peened with 66% overlap 1 scans exhibited the least corrosion. The wettability of the samples was also determined as a measure to analyze the effects of HRLSP on biocompatibility. In addition, peening is seen to induce surface corrosion, which minimizes the risks of implant failure.

  11. Corrosion behaviour of tinplate cans in contact with tomato purée and protective (inhibiting) substances.

    Science.gov (United States)

    Nincević Grassino, A; Grabarić, Z; Pezzani, A; Squitieri, G; Fasanaro, G; Impembo, M

    2009-11-01

    The dissolution of iron and tin from tinplate cans filled with tomato purée (pH 4.34) and dioctyl sebacate oil (DOS), essential onion oil (EOO) or potassium nitrate was studied using atomic absorption spectroscopy (AAS), while nitrate was determined using high-performance liquid chromatography (HPLC). The maximum values found in cans were up to 284 mg kg(-1) for tin and 513 mg kg(-1) for iron at elevated storage temperature. Results indicated that the addition of EOO to tomato purée prevents the corrosion process in the case of tin, where concentrations were lowered from 223 to 28 mg kg(-1) for cans with DOS oil and EOO at 20 degrees C, respectively (inhibition rate of 87%). On the other hand, the presence of EOO enhanced the corrosion process for iron increasing the concentration from 15 to 46 mg kg(-1) during 7 months of storage, although this value did not exceed maximum permitted value (50 mg kg(-1)). In cans with tomato purée and potassium nitrate, dissolution of tin started after 30 (36 degrees C) and 60 (20 degrees C) days of storage as a consequence of nitrate action, which act as a corrosion accelerator. Since the addition of EOO improves the taste of canned tomato purée, its potential use as a corrosion inhibitor would be of interest.

  12. Inhibitory Effect of Kopsia Singapurensis Extract on the Corrosion Behavior of Mild Steel in Acid Media

    Institute of Scientific and Technical Information of China (English)

    RAJA Pandian Bothi; RAHIM Afidah Abdul; OSMAN Hasnah; AWANG Khalijah

    2010-01-01

    The influence of the alkaloid extract of Kopsia singapurensis on the corrosion behavior of mild steel (MS) in 1 mol·L-1 HC1 and 1 mol·L-1 H2SO4 was studied using electrochemical techniques,viz.,potentiodynamic polarization and AC impedance.The experimental results clearly show that the plant extract effectively inhibits corrosion in both acid media and the inhibition efficiency obtained from the electrochemical techniques is in good agreement.Furthermore,the polarization technique indicates that the extract acts as an anodic type inhibitor in HC1 and as a mixed type in H2SO4 Scanning election microscopy (SEM) was carried out to examine the surface morphological changes of metal specimens in both the inhibited and uninhibited solutions.SEM images show the formation of an adsorbed layer over the metal surface by the inhibitor molecule.The presence of alkaloidal constituents in the plant extract was confirmed by Fourier transform infrared (FTIR) spectroscopy and chemical analysis.

  13. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid

    Science.gov (United States)

    Al-Amiery, Ahmed A.; Binti Kassim, Fatin A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2016-01-01

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10−3 M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir’s adsorption isotherm. The effect of temperature on corrosion behavior in the presence of 5 × 10−3 M inhibitor was studied in the temperature range of 30–60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl. PMID:26795066

  14. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid

    Science.gov (United States)

    Al-Amiery, Ahmed A.; Binti Kassim, Fatin A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2016-01-01

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10-3 M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir’s adsorption isotherm. The effect of temperature on corrosion behavior in the presence of 5 × 10-3 M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.

  15. Effect of chloride content of molten nitrate salt on corrosion of A516 carbon steel.

    Energy Technology Data Exchange (ETDEWEB)

    Bradshaw, Robert W.; Clift, W. Miles

    2010-11-01

    The corrosion behavior of A516 carbon steel was evaluated to determine the effect of the dissolved chloride content in molten binary Solar Salt. Corrosion tests were conducted in a molten salt consisting of a 60-40 weight ratio of NaNO{sub 3} and KNO{sub 3} at 400{sup o}C and 450{sup o}C for up to 800 hours. Chloride concentrations of 0, 0.5 and 1.0 wt.% were investigated to determine the effect on corrosion of this impurity, which can be present in comparable amounts in commercial grades of the constituent salts. Corrosion rates were determined by descaled weight losses, corrosion morphology was examined by metallographic sectioning, and the types of corrosion products were determined by x-ray diffraction. Corrosion proceeded by uniform surface scaling and no pitting or intergranular corrosion was observed. Corrosion rates increased significantly as the concentration of dissolved chloride in the molten salt increased. The adherence of surface scales, and thus their protective properties, was degraded by dissolved chloride, fostering more rapid corrosion. Magnetite was the only corrosion product formed on the carbon steel specimens, regardless of chloride content or temperature.

  16. Effect of H2S concentration on the corrosion behavior of pipeline steel under the coexistence of H2S and CO2

    Science.gov (United States)

    Li, Da-peng; Zhang, Lei; Yang, Jian-wei; Lu, Min-xu; Ding, Jin-hui; Liu, Ming-liang

    2014-04-01

    The effect of H2S concentration on H2S/CO2 corrosion of API-X60 steel was studied by scanning electron microscopy, a weight-loss method, potentiodynamic polarization tests, and the electrochemical impedance spectroscopy technique. It is found that the corrosion process of the steel in an environment where H2S and CO2 coexist at different H2S concentrations is related to the morphological structure and stability of the corrosion product film. With the addition of a small amount of H2S, the size of the anode reaction region is decreased due to constant adsorption and separation of more FeS sediment or more FeHS+ ions on the surface of the steel. Meanwhile, the double-layer capacitance is diminished with increasing anion adsorption capacity. Therefore, the corrosion process is inhibited. The general corrosion rate of the steel rapidly decreases after the addition of a small amount of H2S under the coexistence of H2S and CO2. With a further increase in H2S concentration, certain parts of the corrosion product film become loose and even fall off. Thus, the protection provided by the corrosion product film worsens, and the corrosion rate tends to increase.

  17. Effect of H2S concentration on the corrosion behavior of pipeline steel under the coexistence of H2S and CO2

    Institute of Scientific and Technical Information of China (English)

    Da-peng Li; Lei Zhang; Jian-wei Yang; Min-xu Lu; Jin-hui Ding; Ming-liang Liu

    2014-01-01

    The effect of H2S concentration on H2S/CO2 corrosion of API-X60 steel was studied by scanning electron microscopy, a weight-loss method, potentiodynamic polarization tests, and the electrochemical impedance spectroscopy technique. It is found that the cor-rosion process of the steel in an environment where H2S and CO2 coexist at different H2S concentrations is related to the morphological structure and stability of the corrosion product film. With the addition of a small amount of H2S, the size of the anode reaction region is de-creased due to constant adsorption and separation of more FeS sediment or more FeHS+ions on the surface of the steel. Meanwhile, the dou-ble-layer capacitance is diminished with increasing anion adsorption capacity. Therefore, the corrosion process is inhibited. The general cor-rosion rate of the steel rapidly decreases after the addition of a small amount of H2S under the coexistence of H2S and CO2. With a further in-crease in H2S concentration, certain parts of the corrosion product film become loose and even fall off. Thus, the protection provided by the corrosion product film worsens, and the corrosion rate tends to increase.

  18. Effect of temperature on corrosion behavior of 3003 aluminum alloy in ethylene glycol-water solution

    Institute of Scientific and Technical Information of China (English)

    Chen Xin; Tian Wenming; Li Songmei; Yu Mei; Liu Jianhua

    2016-01-01

    The effect of temperature on the corrosion behavior of 3003 aluminum alloy in ethylene glycol–water solution was investigated by potentiodynamic polarization and electrochemical impe-dance spectroscopy (EIS) techniques. The surface characterization was observed and determined by scanning electron microscopy (SEM), atomic force microscopy (AFM) and energy dispersive spec-trometer (EDS). The results demonstrate that the anodic aluminum dissolution and the cathodic oxygen reduction were accelerated by the increased temperature. However, as temperature was over 60 °C, the solubility and concentration of oxygen decreased, resulting in the inhibition of cathodic reaction. The cathodic reaction rate of 3003 aluminum alloy rose to the maximum at 60 °C. The Warburg impedance in Nyquist diagram diminished and then was replaced by a negative capaci-tance caused by the absorption of intermediate corrosion product on electrode. On the other hand, after potentiodynamic measurements, 3003 aluminum alloy suffered pitting corrosion. The dissolu-tion of aluminum alloy around secondary phase particles expanded both horizontally and vertically. © 2016 The Authors. Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.

  19. The Effect of Desulfovibrio sp. Biofilms on Corrosion Behavior of Copper in Sulfide-Containing Solutions

    Science.gov (United States)

    Güngör, Nihal Doğruöz; Çotuk, Ayşın; Dışpınar, Derya

    2015-03-01

    This study aims to detect the effect of Desulfovibrio sp. on copper in terms of biofilm formation and corrosion in 722 h. In that way, appropriate strategies to inhibit microbiological corrosion in copper systems with Desulfovibrio sp. can be evaluated. For this purpose, experiments were performed in 1 L glass model system containing 28 copper coupons and pure culture of the sulfate-reducing bacteria (SRB) strain Desulfovibrio sp. in Postgate's medium C. Also, a control system with copper coupons but without Desulfovibrio sp. containing sterile Postgate's medium was studied concurrently with the test system. The test coupons were collected from systems at certain time intervals, namely 24, 168, 360, and 720 h. The samples were then subjected to several characterization analyses such as measurement of Desulfovibrio sp. numbers, corrosion resistance, EPS extraction, carbohydrate analysis, SEM, and EDS. During the experiments, the maximum Desulfovibrio sp. count in biofilm samples was found at 360 h. Carbohydrate and copper concentrations in biofilm were increased over time. EDS analysis revealed Cu, S, C, O, and Cl peaks on the surface of the samples. For the control coupons, only Cu peaks were observed. The results obtained from this study showed that copper was corroded by Desulfovibrio sp. in the model system under laboratory conditions.

  20. Inhibition of Steel Corrosion and Alkaline Zinc Oxide Dissolution by Dicarboxylate Bola-Amphiphiles: Self-Assembly Supersedes Host-Guest Conception.

    Science.gov (United States)

    Schmelter, Dirk; Langry, Arthur; Koenig, Andrej; Keil, Patrick; Leroux, Fabrice; Hintze-Bruening, Horst

    2017-06-05

    For many decorative applications like industrial and architectural paints, prevention of metal substrates from corrosion is a primary function of organic coatings. Triggered release of inhibitor species is generally accepted as a remedy for starting corrosion in case of coatings damage. A polyurethane based coating, doped with bola-amphiphiles of varying molecular weight but with a common head group motif that stems from ring-opened alkenyl succinic anhydride, enables passivation of the defect and mitigates cathodic delamination, if applied on cold rolled steel. An antagonistic effect results from the intercalation of the bola-amphiphiles into layered double hydroxide Zn2Al(OH)6 and subsequent incorporation of the hybrid phase into the organic matrix. In particular higher molecular weight bola-amphiphiles get immobilized through alkaline degradation of the layered framework in the basic milieu at the cathode. By means of sediments from colloidal states it is demonstrated that in-situ formed zinc oxide encapsulates the hybrid phase, evidenced by impeded dissolution of the ZnO based shell into caustic soda. While inhibition of steel corrosion results from a Donnan barrier layer, impeded zinc oxide dissolution is rooted in zinc catalyzed bola-amphiphile hydrolysis and layered deposition of the crystalline spacer diol hydrogenated bisphenol-A.

  1. Inhibition of acidic corrosion of carbon steel by some mono and bis azo dyes based on 1,5 dihydroxynaphihalene.

    Science.gov (United States)

    Abdallah, Metwally; Moustafa, Moustafa E

    2004-01-01

    Inhibition of the corrosion of carbon steel in hydrochloric acid solution by some mono- and bis-azo dyes based on 1,5-dihydroxynaphthalene was studied in relation to the concentration of inhibitors using weight loss and potentiostatic polarization techniques. The percentage inhibition efficiency calculated from two methods is in a good agreement with each other. The inhibition mechanism of the additives was ascribed to the formation of complex compound adsorbed on the metal surface. The adsorption process follows Freundlich adsorption isotherm. The formation of the complex compound was studied by conductometric and potentiometric titrations. The stability constants of the Fe-complexes were determined using the latter technique and related to the inhibition efficiency.

  2. USE OF COUPLED MULTI-ELECTRODE ARRAYS TO ADVANCE THE UNDERSTANDING OF SELECTED CORROSION PHENOMENA

    Energy Technology Data Exchange (ETDEWEB)

    N.D. Budiansky; F. Bocher; H. Cong; M.F. Hurley; J.R. Scully

    2006-02-23

    The use of multi-coupled electrode arrays in various corrosion applications is discussed with the main goal of advancing the understanding of various corrosion phenomena. Both close packed and far spaced electrode configurations are discussed. Far spaced electrode arrays are optimized for high throughput experiments capable of elucidating the effects of various variables on corrosion properties. For instance the effects of a statistical distribution of flaws on corrosion properties can be examined. Close packed arrays enable unprecedented spatial and temporal information on the behavior of local anodes and cathodes. Interactions between corrosion sites can trigger or inhibit corrosion phenomena and affect corrosion damage evolution.

  3. Effect of silty sand in formation water on CO{sub 2} corrosion behavior of carbon steel

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Wei, E-mail: weiliu@ustb.edu.cn; Dou, Juanjuan; Lu, Songle; Zhang, Peng; Zhao, Qinghe

    2016-03-30

    Graphical abstract: Silty sand (SiO{sub 2}) promoted the rapid heterogeneous nucleation of corrosion product (FeCO{sub 3}) and simultaneously decreased its grains growth. Silty sand mixed with corrosion product to form the outer layer of corrosion scale with high compactness, blocking the transport of ferrous ions and leading to the formation of the inner layer of corrosion scale without silty sand. The corrosion rate of carbon steel was obviously reduced due to the existence of silty sand in the outer layer by inhibiting anodic and cathodic currents. - Highlights: • CO{sub 2} corrosion rate of carbon steel was obviously reduced due to the existence of silty sand. • The corrosion scale containing silty sand inhibited anodic and cathodic currents, contributing to low corrosion rate. • A development mechanism of corrosion scale in silty sand containing CO{sub 2} environment was proposed. - Abstract: Corrosion behavior of carbon steel in CO{sub 2} aqueous environment containing silty sand was investigated using corrosion mass loss method, scanning electron microscopy (SEM), energy diffraction spectrum (EDS), and various electrochemical measurements. The results show that the corrosion rate of carbon steel was obviously reduced due to the existence of silty sand. Silty sand promoted the rapid heterogeneous nucleation of corrosion product FeCO{sub 3} and simultaneously decreased its grains growth. Silty sand mixed with corrosion product to form the outer layer of corrosion scale with high compactness, blocking the transport of ferrous ions and leading to the formation of the inner layer of corrosion scale without silty sand. The existence of silty sand in the outer layer of corrosion scale inhibited anodic and cathodic currents.

  4. Effect of water content on corrosion inhibition behavior of self-assembled TDPA on aluminum alloy surface%溶液中含水量对铝合金表面自组装TDPA膜缓蚀行为的影响

    Institute of Scientific and Technical Information of China (English)

    屈钧娥; 陈庚; 王海人; 聂德键

    2013-01-01

    Self assembled monolayers (SAMs) of 1-tetradecylphosphonic acids (TDPA, CH3(CH2)13P(O)(OH)2 ) were formed on the 2024 aluminum alloy surface in TDPA-containing ethanol−water solutions with different water content. The adsorption and corrosion protection properties of the SAMs for 2024 alloy in 0.1 mol/L H2SO4 solution were examined and characterized by potentiodynamic polarization, electrochemical impedance spectrum (EIS), Fourier transformed infrared spectroscopy (FTIR), Auger electron spectra (AES) and atomic force microscopy (AFM). FTIR and AES results show that the TDPA molecules were successfully adsorbed on the 2024 aluminum alloy surface, and the density of the SAMs increased with the increasing water content in the assembly solution. The results of electrochemical studies and corrosion morphologies observed by AFM show that a 4 h modification resulted in maximal inhibition efficiency,and the higher the water content in the assembly solution is, the better the inhibition performance of the SAMs can be achieved. The effect of water content in TDPA solutions on the performance of the SAMs is related to the hydration reaction of the metal surface.%用含水量不同的正十四烷基膦酸(TDPA)/乙醇−水混合溶液在2024铝合金表面制备TDPA自组装膜。采用动电位扫描、电化学交流阻抗(EIS)、傅里叶红外(FTIR)、俄歇能谱(AES)以及原子力显微镜(AFM)等手段,研究自组装膜在0.1 mol/L硫酸溶液中对铝合金的吸附及缓蚀性能的影响。傅里叶红外以及俄歇能谱测试结果表明:TDPA分子成功吸附于合金表面,且吸附密度随着溶液中水含量的增加而增加。电化学测试以及腐蚀形貌观察结果表明:4h 的自组装能够获得最佳缓蚀效率;自组装溶液中水含量越高,得到的自组装膜缓蚀性能越好;自组装溶液中水对自组装膜性能的影响与金属表面的水化反应有关。

  5. Migrating corrosion inhibitor blend for reinforced concrete: Part 1 -- Prevention of corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Elsener, B.; Buechler, M.; Stalder, F.; Boehni, H.

    1999-12-01

    The efficiency of a migrating corrosion inhibitor in preventing corrosion of mild steel was investigated in saturated calcium hydroxide (Ca[OH]{sub 2}) solutions and in mortar. The protective effect of the inhibitor against pitting corrosion caused by chloride attack and against uniform corrosion as a result of carbonation was determined. Results showed that high concentrations ({approx}10%) allowed the inhibition of pitting corrosion tritiation in solution containing 1 M/L sodium chloride (NaCl). However, inhibiting properties can be lost by evaporation of the volatile constituent of the inhibitor or by the precipitation of the nonvolatile fraction of the inhibitor in presence of calcium ions. Addition of the inhibitor blend to mortar yielded a retardation of the corrosion initiation in the case of chloride-induced corrosion, but o significant reduction in corrosion rate. No effect was found in carbonated samples, and no influence on the corrosion rate was detected. Additionally, the estimation of the extent of the retarding effect on corrosion initiation on real structures was difficult, as the inhibitor was found to evaporate from the mortar. This evaporation resulted in a loss of inhibiting properties. Hence, the long-term efficiency of the inhibitor could not be guaranteed.

  6. Corrosion Inhibition of AISI 316L and Modified-AISI 630 Stainless Steel by the New Organic Inhibitor [(CH32N]3PSe in Chloride Media:Electrochemical and Physical Study

    Directory of Open Access Journals (Sweden)

    Yafa ZARGOUNI

    2015-04-01

    Full Text Available We evaluate the effect of the Tris-dimethylaminoselenophosphoramide (SeAPon the corrosion inhibition of modified-AISI 630 and AISI 316L stainless steel (SS in 3 wt. % NaCl. The electrochemical behaviors of tested SS samples are investigated before and after adding the Seep into the chloride media by potentiodynamic polarization technique. The adsorption of SeAP onto both SS surfaces is verified by global discharge optical emission spectroscopy (GDOES.  SeAP is found to be a good inhibitor for SS corrosion, especially when added at a concentration of 0.5 wt. %.

  7. Inhibition Behaviour of Some Isonicotinic Acid Hydrazides on the Corrosion of Mild Steel in Hydrochloric Acid Solution

    Directory of Open Access Journals (Sweden)

    M. P. Chakravarthy

    2013-01-01

    Full Text Available New corrosion inhibitors, namely, isonicotinic acid (1H-indol-3-yl-methylenehydrazide (INIMH and isonicotinic acid (1H-pyrrol-2-yl-methylenehydrazide (INPMH, have been synthesized, and their inhibitive characteristics for the corrosion of mild steel in 0.5 M HCl were investigated by mass loss and electrochemical techniques. The structures of the synthesized compounds were confirmed using spectral studies. Potentiodynamic polarization studies revealed that the investigated inhibitors are of mixed type. Various thermodynamic parameters were evaluated. Langmuir adsorption isotherm was found to be the best description for both inhibitors. FTIR spectra, energy dispersive X-ray spectroscopy (EDX, and scanning electron microscopy (SEM were performed to characterize the passive film on the metal surface.

  8. effect of municipal liquid waste on corrosion susceptibility of ...

    African Journals Online (AJOL)

    DR. AMINU

    The corrosion rate of the galvanized steel pipe was measured using the gravimetric technique. ... three stagnant liquid waste samples collected outside the city (SLW4,SLW5, and ... increased exposure time, a layer of protective corrosion ...

  9. Design of nanocoatings by in situ phosphatizing reagent catalyzed polysilsesquioxane for corrosion inhibition and adhesion promotion on metal alloys

    Science.gov (United States)

    Henderson, Kimberly B.

    When a metal reacts with oxygen and water, a redox reaction happens, which will cause corrosion. Current surface pretreatment for inhibiting corrosion on metal alloys is a phosphate conversion bath. The phosphate conversion bath will generate a phosphate-chromate layer to adhere strongly to a metal substrate. However, it is toxic and unfriendly to the environment. Our group proposed an innovative coating that contains a phosphate component (ISPR-In-situ Phosphatizing Reagent) within a protective coating. The ISPR coating will form a bound phosphate layer on the metal surface acting as the corrosion barrier and enhancing adhesion into the metal surface; moreover, it is low in cost and non-toxic. Within this dissertation, there are four projects that investigate design of ISPR nanocoatings for the use of corrosion inhibition and adhesion promotion. Surface modification and adjusting concentrations of materials with the different formulations are explored. The first project focuses on the adhesion enhancement of a coating created by modifying the surface of an aluminum panel. Secondly, the next project will discuss and present the use of three rare earth element formulations as a replacement for phosphate conversion coatings on magnesium alloy, AZ61. The third project is the design of a nanocoating by using heat dissipating materials to fill in small vacant spaces in the ISPR network coating on various metal alloys. The last project, studies the strategic selection of incorporating metal components into ISPR network by the reduction potential values on several different alloys. Many methods of analysis are used; SEM, TEM, ASTM B117, ASTM D1308, ASTM D3359, EIS, and thickness probe. It was found that the addition of ISPR in the nanocoatings dramatically improves the vitality of metal alloys and these results will be presented during this dissertation.

  10. Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series - Part III. Immersion time effects and theoretical studies

    Energy Technology Data Exchange (ETDEWEB)

    Amin, Mohammed A., E-mail: maaismail@yahoo.co [Materials and Corrosion Lab (MCL), Department of Chemistry, Faculty of Science, Taif University, 888 Hawaiya, Taif (Saudi Arabia); Department of Chemistry, Faculty of Science, Ain Shams University, 11566 Abbassia, Cairo (Egypt); Ahmed, M.A. [Physics Department, Faculty of Science, Taif University, 888 Hawaiya, Taif (Saudi Arabia); Arida, H.A. [Materials and Corrosion Lab (MCL), Department of Chemistry, Faculty of Science, Taif University, 888 Hawaiya, Taif (Saudi Arabia); Kandemirli, Fatma [Nigde University, Department of Chemistry, 51240 Nigde (Turkey); Saracoglu, Murat [Faculty of Education, Erciyes University, 38039 Kayseri (Turkey); Arslan, Taner [Department of Chemistry, Eskisehir Osmangazi University, 26480 Eskisehir (Turkey); Basaran, Murat A. [Nigde University, Department of Mathematics, 51240 Nigde (Turkey)

    2011-05-15

    Graphical abstract: . Display Omitted Research highlights: The inhibition effect of TX-100, TX-165 and TX-305 on iron corrosion in 1.0 M HCl was studied. TX-305 inhibited iron corrosion more effectively than TX-100 and TX-165. In most cases, inhibition efficiency increased with time during the first 60 min of immersion, then decreased. Calculated quantum chemical parameters confirmed the experimental inhibition efficiencies of the tested surfactants. - Abstract: The inhibition performance of three selected non-ionic surfactants of the TRITON-X series, namely TRITONX-100 (TX-100), TRITON-X-165 (TX-165) and TRITON-X-305 (TX-305), on the corrosion of iron was studied in 1.0 M HCl solutions as a function of inhibitor concentration (0.01-0.20 g L{sup -1}) and immersion time (0.0-8 h) at 298 K. Measurements were conducted based on Tafel polarization, LPR and impedance studies. At high frequencies, the impedance spectrum showed a depressed capacitive loop in the complex impedance plane, whose diameter is a function of the immersion time and the type and concentration of the introduced surfactant. In all cases, an inductive loop was observed in the low frequency and this could be attributed to the adsorption behavior. The inhibition efficiency increased with immersion time, reached a maximum and then decreased. This was attributed to the orientation change of adsorbed surfactant molecules. TX-305 inhibited iron corrosion more effectively than TX-100 and TX-165. The frontier orbital energies, the energy gap between frontier orbitals, dipole moments ({mu}), charges on the C and O atoms, the polarizabilities, and the quantum chemical descriptors were calculated. The quantum chemical calculation results inferred that for the HOMO representing the condensed Fukui function for an electrophilic attack (f{sub k}{sup +}), the contributions belong to the phenyl group and the oxygen atom attached to the phenyl group for each tested surfactant. Quantitative structure

  11. Inhibition of Brass Corrosion by 2-Mercapto-1-methylimidazole in Weakly Alkaline Solution

    Science.gov (United States)

    Radovanovic, Milan B.; Antonijevic, Milan M.

    2016-03-01

    The electrochemical behavior of brass and anticorrosion effect of 2-mercapto-1-methylimidazole (2-MMI) in weakly alkaline solution with and without presence of chloride ions was investigated using electrochemical techniques in addition to SEM-EDS analysis. Results show that inhibition efficiency depended on inhibitor concentration and immersion time of brass electrode in inhibitor solution. Inhibition mechanism of 2-mercapto-1-methylimidazole includes adsorption of inhibitor on active sites on electrode surface which was confirmed by SEM-EDS analysis of the brass. Adsorption of the 2-MMI in sodium tetraborate solution obeys Flory-Huggins adsorption isotherm, while in the presence of chloride, ions adsorption of inhibitor obeys Langmuir adsorption isotherm.

  12. Corrosion of low Si-alloyed steels in aqueous solution at 90 deg. C. Inhibitive action of silicates; Corrosion d'aciers faiblement allies au silicium en solution aqueuse a 90 deg. C. Action inhibitrice des silicates

    Energy Technology Data Exchange (ETDEWEB)

    Giordana, S

    2002-02-01

    Low-Si alloyed steels, with Si content ranging from 0.25 to 3.2 wt%, as potential candidate materials for high-level nuclear waste disposal containers, have been studied four the point of view of their corrosion behaviour at 90 deg C in an aqueous solution simulating groundwater (0.1 M NaCl borate-buffered solution with a pH of 8.5) both in reducing and in aerated conditions. The influence of silicate addition to the solution is examined so as to represent the silicon of groundwater, coming from the clay dissolution. When no silicate was added to the solution, silicon as an alloying element was proved to degrade in the first moments the steel ability to passivate. For longer immersion times, protective effects developed most efficiently on the steel containing 3.2 wt% silicon both in reducing an in aerating conditions, Infrared spectroscopy, EDSX, XRD and Raman microprobe were applied to characterise the oxide layer composition, which was found to be a mixture of magnetite and maghemite. In the presence of silicate in the solution, clay-like iron silicates appeared in the corrosion layer. Electrochemical tests results show that adding silicate into solution resulted in increasing the steel ability to passivate. In the short term, the inhibiting effect of silicate was confirmed by mass loss tests, but the tendency was inverse in the long term. Silicate iron layers were eventually less protective than the magnetite layers formed in the absence of silicate. (author)

  13. Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion

    Directory of Open Access Journals (Sweden)

    Jin-xia XU

    2013-07-01

    Full Text Available This investigation was aimed at evaluating the effectiveness of corrosion inhibitors in increasing the chloride threshold value for steel corrosion. Three types of corrosion inhibitors, calcium nitrite (Ca(NO22, zinc oxide (ZnO, and N,N'-dimethylaminoethanol (DMEA, which respectively represented the anodic inhibitor, cathodic inhibitor, and mixed inhibitor, were chosen. The experiment was carried out in a saturated calcium hydroxide (Ca(OH2 solution to simulate the electrolytic environment of concrete. The inhibitors were initially mixed at different levels, and then chloride ions were gradually added into the solution in several steps. The open-circuit potential (Ecorr and corrosion current density (Icorr determined by electrochemical impedance spectra (EIS were used to identify the initiation of active corrosion, thereby determining the chloride threshold value. It was found that although all the inhibitors were effective in decreasing the corrosion rate of steel reinforcement, they had a marginal effect on increasing the chloride threshold value.

  14. Contribution to the Study of Effects of Surface State of Welded Joints in Stainless Steel Upon Resistance Towards Pitting Corrosion

    Directory of Open Access Journals (Sweden)

    Juraga, I.

    2007-01-01

    Full Text Available Successful corrosion resistance of stainless steels is based on their natural ability of passivation, i.e. formation of film of chromium oxides that prevents corrosion in many environments. Any nonuniformity of surface layers may be initial spot for corrosion processes and damages. In this contribution, beside real corrosion damages occurred in practice, results of testing of pitting corrosion resistance of weld beads made applying TIG process on AISI 316L steel grade are presented. SEM and EDX testing, as well as electrochemical corrosion testing confirmed adverse effects of heat tints zones upon corrosion resistance of stainless steels.

  15. Corrosion protection of steel in ammonia/water heat pumps

    Science.gov (United States)

    Mansfeld, Florian B.; Sun, Zhaoli

    2003-10-14

    Corrosion of steel surfaces in a heat pump is inhibited by adding a rare earth metal salt to the heat pump's ammonia/water working fluid. In preferred embodiments, the rare earth metal salt includes cerium, and the steel surfaces are cerated to enhance the corrosion-inhibiting effects.

  16. Carbon dioxide corrosion inhibition of N80 carbon steel in single liquid phase and liquid/particle two-phase flow by hydroxyethyl imidazoline derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Liu, X. [State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016, Liaoning Province (China); Department of Applied Chemistry, Shenyang Institute of Chemical Technology, Shenyang 110142 (China); Zheng, Y.G. [State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016, Liaoning Province (China); Okafor, P.C. [State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016, Liaoning Province (China); Department of Pure and Applied Chemistry, University of Calabar, Calabar (Nigeria)

    2009-07-15

    CO{sub 2} corrosion inhibition of N80 steel in liquid single-phase and liquid/particle two-phase flow by 2-undecyl-1-hydroxyethyl imidazoline (HEI-11) and 2-undecyl-1-hydroxyethyl-1-hydroxyethyl quaternary imidazoline (HQI-11) was investigated using weight loss, potentiodynamic polarization, EIS, and scanning electron microscope (SEM) techniques. The results show that the corrosion rate in the absence and presence of the imidazolines is strongly dependent on the flow condition and presence of entrained sand particles. The imidazolines function via a mixed-type corrosion inhibition mechanism. The inhibition efficiencies of the imidazolines followed the trend HQI-11 > HEI-11 in all the systems studied. Inhibition mechanism has been discussed in relation to the polycentric adsorption sites on the imidazoline molecules. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  17. Effect of Post Heat Treatment on Corrosion Resistance of Phytic Acid Conversion Coated Magnesium

    Institute of Scientific and Technical Information of China (English)

    R.K. Gupta; K. Mensah-Darkwa; D. Kumar

    2013-01-01

    An environment friendly chemical conversion coating for magnesium was obtained by using a phytic acid solution.The effect of post-coating 1heat treatment on the microstructures and corrosion properties of phytic acid conversion coated magnesium was investigated.It was observed that the microstructure and corrosion resistive properties were improved for the heat treated samples.The corrosion current density for bare magnesium,phytic acid conversion coated magnesium,and post-coating heat treated magnesium was calculated to be 2.48 × 10-5,1.18 × 10-6,and 9.27 × 10-7 A/cm2,respectively.The lowest corrosion current density for the heat treated sample indicated its highest corrosion resistive effect for the magnesium.The maximum corrosion protective nature of the heat treated sample was further confirmed by the largest value of impedance in electrochemical impedance spectroscopy studies.

  18. RESEARCH AND DEVELOPMENT OF CORROSION INHIBITION TECHNOLOGY FOR STEELS%钢材阻锈技术的研究与发展

    Institute of Scientific and Technical Information of China (English)

    唐丹; 邢桂菊; 王开明; 姜效军

    2009-01-01

    Four corrosion inhibition technologies for steels,namely coating,corrosion inhibitor,steel bar in-hibitor and weathering steels are introduced based on the current knowledge in corrosion and protection of engineering steels.The status in research and application of these technologies and the problems existing in each technology are analyzed.The development trend of corrosion inhibition technology is put forword as a conclusion.%针对钢铁材料的锈蚀现状,介绍了涂层、缓蚀剂、钢筋阻锈剂、耐候钢等四种比较成型的钢材阻锈技术,分析了这几项技术的研究应用情况和目前存在的问题,指出了钢材阻锈技术未来的发展方向.

  19. Effect of Rare Earths on Corrosion Resisting Properties of Carbon-Manganese Clean Steels

    Institute of Scientific and Technical Information of China (English)

    郭锋; 林勤; 孙学义

    2004-01-01

    Electrochemistry experiments were made on carbon-manganese clean steel with rare earths Ce and La respectively to observe corrosion parameters such as corrosion current icorr, and characteristic potential of pitting Eb. The results indicate that the rare earths have effect on corrosion resisting properties of carbon-manganese clean steel, and the optimum contents of La is about 0.011% (mass fraction) and Ce about 0.014% (mass fraction) respectively. The change of corrosion resistance is related to the action of rare earths on microstructure and effect on surface state of samples in the process of polarization.

  20. Effect of corrosion on the ship hull of a double hull very large crude oil carrier

    Science.gov (United States)

    Vu Van, Tuyen; Yang, Ping

    2017-09-01

    This study aims to examine and analyze the effect of corrosion wastage on the ship hull of a double hull very large crude oil carrier. To calculate the ultimate bending moment capacity, along with the neutral axis position at the limit state, section modulus, and moment of inertia, the incremental-iterative method is employed. This paper also considered the residual strength checking criteria of ship hull and the ultimate stress behaviors of the representative structural elements. Then, Paik's probabilistic corrosion, which employs two levels of corrosion rate and three different assumptions of coating life time, is applied to assess the corrosion effects. The calculation results obtained through relevant analyses are also presented.

  1. The Inhibitive Potential of Arecaceae Extract on the Corrosivity of Aluminium based Matrix Composite and Medium Carbon Steel in Different Media

    Directory of Open Access Journals (Sweden)

    Paul Aondona IHOM

    2013-06-01

    Full Text Available In this research study, the inhibitive potential of Arecaceae extract on the corrosivity of aluminium based matrix composite and medium carbon steel in different media have been undertaken. The composite and the carbon steel were exposed in 0.5M NaOH and 0.5M HCl solutions as the control solutions. The Arecaceae extract from the fruit juice was added in volume percentages of 5%v/v and 10%v/v. The exposure time covered 12 days, and the monitored temperature range during the exposure time was 25-39°C. The result indicated that the most corrosive media were those without the Arecaceae inhibitor; where corrosion rate ranged from 0.106mpy to 0.409mpy. The medium carbon steel did not show any sign of corrosion in the 0.5M NaOH solution. Arecaceae inhibitor addition of 5%v/v gave optimum corrosion rate reduction; the corrosion rate was in the range of 0.018mpy to 0.199mpy. Although the lowest range of 0.013mpy to 0.192mpy was obtained with 10%v/v of Arecaceae, however on the overall performance the 5%v/v of Arecaceae was better. The inhibition of corrosion by Arecaceae was as a result of adsorption and phase layers on the surface of the metals.

  2. Effects of tenoxicam in experimental corrosive esophagitis model.

    Science.gov (United States)

    Erbaş, M; Kiraz, H A; Küçük, A; Topaloğlu, N; Erdem, H; Şahin, H; Toman, H; Ozkan, M Turgut Alper

    2015-04-01

    Esophageal stricture, one of the important complications of corrosive esophagus, develops following edema and granulation tissue that forms during and after the inflammatory reactions. Tenoxicam, a non-steroid anti-inflammatory drug with a long half-life, prevents various leukocyte functions including phagocyte and histamine secretion by inhibiting prostaglandin synthesis and removes various oxygen radicals in the region of inflammation. We designed this as a histopathological study using tenoxicam in rats for which we created a corrosive esophagus model. After necessary authorizations were obtained, the study was performed in Çanakkale 18 Mart University experimental animal laboratory. Twenty-four Wistar albino rats, weighing 220-240 g, were used for the experiment. Experimental animals were randomized into three groups: tenoxicam group (group T, n:8), control group (group C, n:8), and sham group (group S, n:8). Tenoxicam 0.5 mg/kg/day was administered to animals in group T, where esophageal burn was developed experimentally, 5 mg/kg 0.9% NaCL was administered i.p. to rats in group C for 15 days, once in 24 hours. No procedure was applied to rats in group S. After 15 days, all animals were sacrificed under general anesthesia and their esophagi were extracted. As a result of histopathological evaluation, inflammation and fibroblast proliferation was not observed in rats in the sham group (group S). Intense inflammation was observed in six rats (6+/2-) in the control group, and fibroblast proliferation was observed as 5+/3-. And in treatment groups, inflammation was evaluated as 3+/5-, and fibroblast proliferation as 3+/5-. In our study, histopathologic damage score was higher in the control group (P < 0.005). We deduce that tenoxicam can be useful in the treatment of caustic esophageal injuries in the acute phase, but think that these drugs require further researches and clinical studies before routine clinical use.

  3. Copper corrosion inhibition in O{sub 2}-saturated H{sub 2}SO{sub 4} solutions

    Energy Technology Data Exchange (ETDEWEB)

    Amin, Mohammed A. [Materials and Corrosion Lab (MCL), Department of Chemistry, Faculty of Science, Taif University, 888 Hawiya, KSA (Egypt); Chemistry Department, Faculty of Science, Ain Shams University, Abbassia, Cairo (Egypt)], E-mail: maaismail@yahoo.com; Khaled, K.F. [Materials and Corrosion Lab (MCL), Department of Chemistry, Faculty of Science, Taif University, 888 Hawiya, KSA (Egypt); Electrochemistry Research Laboratory, Faculty of Education, Ain Shams University, Roxy, Cairo (Egypt)

    2010-04-15

    Corrosion inhibition of copper in O{sub 2}-saturated 0.50 M H{sub 2}SO{sub 4} solutions by four selected amino acids, namely glycine (Gly), alanine (Ala), valine (Val), or tyrosine (Tyr), was studied using Tafel polarization, linear polarization, impedance, and electrochemical frequency modulation (EFM) at 30 deg. C. Protection efficiencies of almost 98% and 91% were obtained with 50 mM Tyr and Gly, respectively. On the other hand, Ala and Val reached only about 75%. Corrosion rates determined by the Tafel extrapolation method were in good agreement with those obtained by EFM and an independent chemical (i.e., non-electrochemical) method. The chemical method of confirmation of the corrosion rates involved determination of the dissolved Cu{sup 2+}, using ICP-AES (inductively coupled plasma atomic emission spectrometry) method of chemical analysis. Nyquist plots exhibited a high frequency depressed semicircle followed by a straight line portion (Warburg diffusion tail) in the low-frequency region. The impedance data were interpreted according to two suitable equivalent circuits. The kinetics of dissolved O{sub 2} reduction and hydrogen evolution reactions on copper surface were also studied in O{sub 2}-saturated 0.50 M H{sub 2}SO{sub 4} solutions using polarization measurements combined with the rotating disc electrode (RDE). The Koutecky-Levich plot indicated that the dissolved O{sub 2} reduction at the copper electrode was an apparent 4-electron process.

  4. Effect of menthol coated craft paper on corrosion of copper in HCl environment

    Indian Academy of Sciences (India)

    P Premkumar; K Kannan; M Natesan

    2010-06-01

    Natural menthol was coated on craft paper by impregnation and studied as volatile corrosion inhibitor for copper in hydrochloric acid environment. The effect of menthol on copper corrosion was studied by gravimetric and electrochemical methods such as potentiodynamic polarization and electrochemical impedance measurements. The results indicate that menthol adsorbs on the metal surface, which protects copper against further corrosion. The adsorption behaviour of menthol on copper surface was found to obey Temkin’s adsorption isotherm.

  5. Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion

    OpenAIRE

    Jin-xia XU; Jiang, Lin-Hua; Wei-lun WANG; TANG, Li; Cui, Li

    2013-01-01

    This investigation was aimed at evaluating the effectiveness of corrosion inhibitors in increasing the chloride threshold value for steel corrosion. Three types of corrosion inhibitors, calcium nitrite (Ca(NO2)2), zinc oxide (ZnO), and N,N'-dimethylaminoethanol (DMEA), which respectively represented the anodic inhibitor, cathodic inhibitor, and mixed inhibitor, were chosen. The experiment was carried out in a saturated calcium hydroxide (Ca(OH)2) solution to simulate the electrolytic environm...

  6. Effect of biologically relevant ions on the corrosion products formed on alloy AZ31B: an improved understanding of magnesium corrosion.

    Science.gov (United States)

    Jang, Yongseok; Collins, Boyce; Sankar, Jagannathan; Yun, Yeoheung

    2013-11-01

    Simulated physiological solutions mimicking human plasma have been utilized to study the in vitro corrosion of biodegradable metals. However, corrosion and corrosion product formation are different for different solutions with varied responses and, hence, the prediction of in vivo degradation behavior is not feasible based on these studies alone. This paper reports the role of physiologically relevant salts and their concentrations on the corrosion behavior of a magnesium alloy (AZ31B) and subsequent corrosion production formation. Immersion tests were performed for three different concentrations of Ca(2+), HPO4(2-), HCO3(-) to identify the effect of each ion on the corrosion of AZ31B assessed at 1, 3 and 10 days. Time-lapse morphological characterization of the samples was performed using X-ray computed tomography and scanning electron microscopy. The chemical composition of the surface corrosion products was determined by electron dispersive X-ray spectroscopy and X-ray diffraction. The results show that: (1) calcium is not present in the corrosion product layer when only Cl(-) and OH(-) anions are available; (2) the presence of phosphate induces formation of a densely packed amorphous magnesium phosphate corrosion product layer when HPO4(2-) and Cl(-) are present in solution; (3) octacalcium phosphate and hydroxyapatite (HAp) are deposited on the surface of the magnesium alloy when HPO4(2-) and Ca(2+) are present together in NaCl solution (this coating limits localized corrosion and increases general corrosion resistance); (4) addition of HCO3(-) accelerates the overall corrosion rate, which increases with increasing bicarbonate concentration; (5) the corrosion rate decreases due to the formation of insoluble HAp on the surface when HCO3(-), Ca(2+), and HPO4(2-) are present together.

  7. Effect of H{sub 2}S on the CO{sub 2} corrosion of carbon steel in acidic solutions

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yoon-Seok, E-mail: choiy@ohio.ed [Institute for Corrosion and Multiphase Technology, Department of Chemical and Biomolecular Engineering, Ohio University, 342 West State Street, Athens, OH 45701 (United States); Nesic, Srdjan [Institute for Corrosion and Multiphase Technology, Department of Chemical and Biomolecular Engineering, Ohio University, 342 West State Street, Athens, OH 45701 (United States); Ling Shiun [ExxonMobil Research and Engineering Company, 1545 Route 22 East, Annandale, NJ 08801 (United States)

    2011-01-15

    The objective of this study is to evaluate the effect of low-level hydrogen sulfide (H{sub 2}S) on carbon dioxide (CO{sub 2}) corrosion of carbon steel in acidic solutions, and to investigate the mechanism of iron sulfide scale formation in CO{sub 2}/H{sub 2}S environments. Corrosion tests were conducted using 1018 carbon steel in 1 wt.% NaCl solution (25 {sup o}C) at pH of 3 and 4, and under atmospheric pressure. The test solution was saturated with flowing gases that change with increasing time from CO{sub 2} (stage 1) to CO{sub 2}/100 ppm H{sub 2}S (stage 2) and back to CO{sub 2} (stage 3). Corrosion rate and behavior were investigated using linear polarization resistance (LPR) technique. Electrochemical impedance spectroscopy (EIS) and potentiodynamic tests were performed at the end of each stage. The morphology and compositions of surface corrosion products were analyzed using scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The results showed that the addition of 100 ppm H{sub 2}S to CO{sub 2} induced rapid reduction in the corrosion rate at both pHs 3 and 4. This H{sub 2}S inhibition effect is attributed to the formation of thin FeS film (tarnish) on the steel surface that suppressed the anodic dissolution reaction. The study results suggested that the precipitation of iron sulfide as well as iron carbonate film is possible in the acidic solutions due to the local supersaturation in regions immediately above the steel surface, and these films provide corrosion protection in the acidic solutions.

  8. The Effect of Adding Corrosion Inhibitors into an Electroless Nickel Plating Bath for Magnesium Alloys

    Science.gov (United States)

    Hu, Rong; Su, Yongyao; Liu, Hongdong; Cheng, Jiang; Yang, Xin; Shao, Zhongcai

    2016-10-01

    In this work, corrosion inhibitors were added into an electroless nickel plating bath to realize nickel-phosphorus (Ni-P) coating deposition on magnesium alloy directly. The performance of five corrosion inhibitors was evaluated by inhibition efficiency. The results showed that only ammonium hydrogen fluoride (NH4HF2) and ammonium molybdate ((NH4)2MoO4) could be used as corrosion inhibitors for magnesium alloy in the bath. Moreover, compounding NH4HF2 and (NH4)2MoO4, the optimal concentrations were both at 1.5 ~ 2%. The deposition process of Ni-P coating was observed by using a scanning electron microscope (SEM). It showed corrosion inhibitors inhibited undesired dissolution of magnesium substrate during the electroless plating process. In addition, SEM observation indicated that the corrosion inhibition reaction and the Ni2+ replacement reaction were competitive at the initial deposition time. Both electrochemical analysis and thermal shock test revealed that the Ni-P coating exhibited excellent corrosion resistance and adhesion properties in protecting the magnesium alloy.

  9. The effect of organic matter associated with the corrosion products on the corrosion of mild steel in the Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Bhosle, N.B.; Wagh, A.B.

    the corrosion of mild steel and the temperature and dissolved oxygen of seawater. In contrast to this, the corrosion and mild steel was inversely related to the organic carbon and water extractable carbohydrates associated with the corrosion products of mild...

  10. Effect of Sulfate Reduced Bacterium on Corrosion Behavior of 10CrMoAl Steel

    Institute of Scientific and Technical Information of China (English)

    WANG Hua; LIANG Cheng-hao

    2007-01-01

    The effects of sulfate reduced bacterium (SRB) on the corrosion behavior of 10CrMoAl steel in seawater were studied by chemical immersion, potentiodynamic polarization, electrochemical impedance spectroscopy measurement, and scanning electron microscope techniques. The results show that the content of element sulfur in the corrosion product of 10CrMoAl steel in seawater with SRB is up to 9.23%, which is higher than that of the same in sterile seawater. X-ray diffraction demonstrates that the main corrosion product is FeS. SRB increases the corrosion rate by anodic depolarization of the metabolized sulfide product. SEM observation indicates that the corrosion product is not distributed continuously; in addition, bacilliform sulfate-reduced bacterium accumulates on the local surface of 10CrMoAl steel. Hence, SRB enhances sensitivity to the localized corrosion of 10CrMoAl steel in seawater.

  11. A Multifunctional Coating for Autonomous Corrosion Control

    Science.gov (United States)

    Calle, L. M.; Hintze, P. E.; Li, W.; Buhrow, J. W.; Jolley, S. T.

    2011-01-01

    This slide presentation reviews the effects of corrosion on various structures at the Kennedy Space Center, and the work to discover a corrosion control coating that will be autonomous and will indicate corrosion at an early point in the process. Kennedy Space Center has many environmental conditions that are corrosive: ocean salt spray, heat, humidity, sunlight and acidic exhaust from the Solid Rocket Boosters (SRBs). Presented is a chart which shows the corrosion rates of carbon steel at various locations. KSC has the highest corrosion rates with 42.0 mils/yr, leading the next highest Galeta Point Beach, in the Panama Canal Zone with 27 mils/yr corrosion. A chart shows the changes in corrosion rate with the distance from the ocean. The three types of corrosion protective coatings are described: barrier (passive), Barrier plus active corrosion inhibiting components, and smart. A smart coating will detect and respond actively to changes in its environment in a functional and predictable manner and is capable of adapting its properties dynamically. The smart coating uses microcapsules, particles or liquid drops coated in polymers, that can detect and control the corrosion caused by the environment. The mechanism for a pH sensitive microcapsule and the hydrophobic core microcapsule are demonstrated and the chemistry is reviewed. When corrosion begins, the microcapsule will release the contents of the core (indicator, inhibitor, and self healing agent) in close proximity to the corrosion. The response to a pH increase is demonstrated by a series of pictures that show the breakdown of the microcapsule and the contents release. An example of bolt corrosion is used, as an example of corrosion in places that are difficult to ascertain. A comparison of various coating systems is shown.

  12. Effect of alloy elements on the anti-corrosion properties of low alloy steel

    Indian Academy of Sciences (India)

    Baorong Hou; Yantao Li; Yanxu Li; Jinglei Zhang

    2000-06-01

    Effect of alloy elements on corrosion of low alloy steel was studied under simulated offshore conditions. The results showed that the elements Cu, P, Mo, W, V had evident effect on corrosion resistance in the atmosphere zone; Cu, P, V, Mo in the splash zone and Cr, Al, Mo in the submerged zone.

  13. One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition.

    Science.gov (United States)

    Liu, Yan; Xue, Jingze; Luo, Dan; Wang, Huiyuan; Gong, Xu; Han, Zhiwu; Ren, Luquan

    2017-04-01

    A facile, rapid and one-step electrodeposition process has been employed to construct a superhydrophobic surface with micro/nano scale structure on a Mg-Sn-Zn (TZ51) alloy, which is expected to be applied as a biodegradable biomedical implant materials. By changing the electrodeposition time, the maximum contact angle of the droplet was observed as high as 160.4°±0.7°. The characteristics of the as-prepared surface were conducted by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). Besides, the anti-corrosion performance of the coatings in stimulated body fluid (SBF) solution were investigated by electrochemical measurement. The results demonstrated that the anti-corrosion property of superhydrophobic surface was greatly improved. This method show beneficial effects on the wettability and corrosion behavior, and therefore provides a efficient route to mitigate the undesirable rapid corrosion of magnesium alloy in favor of application for clinical field. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. The Effect of Corrosive Environment on Geopolymer Concrete Tensile Strength

    Directory of Open Access Journals (Sweden)

    Bayuaji Ridho

    2017-01-01

    Full Text Available This study has the purpose to explore the potential of geopolymer concrete tensile strength in particular on the effects of corrosive environments. Geopolymer concrete, concrete technology used no OPC that has advantages, one of which is durability, especially for corrosive seawater environment. In addition, geopolymer concrete with polymerization mechanism does not require large energy consumption or an environmentally friendly concept. Geopolymer concrete in this study is using a type C fly ash from PT. International Power Mitsui Operation & Maintenence Indonesia (IPMOMI Paiton. The type of alkaline activator used NaOH (14 molar and Na2SiO3. Coarse and fine aggregate used are local aggregate. Geopolymer concrete molded test specimen with dimensions of (10 × 20 cm cylinder, further heating and without heating, then maintained at room temperature and seawater up to 28 days. Then to determine the mechanical properties, the tensile strength testing is done with reference. This result of study indicates the curing of geopolymer concrete at 60 ° C for 24 hours to raise the tensile strength of geopolymer concrete.

  15. Effect of impurities on the corrosion behavior of CO2 transmission pipeline steel in supercritical CO2-water environments.

    Science.gov (United States)

    Choi, Yoon-Seok; Nesic, Srdjan; Young, David

    2010-12-01

    The corrosion property of carbon steel was evaluated using an autoclave under CO(2)-saturated water phase and water-saturated CO(2) phase with impurities (O(2) and SO(2)) at 80 bar CO(2) and 50 °C to simulate the condition of CO(2) transmission pipeline in the carbon capture and storage (CCS) applications. The results showed that the corrosion rate of carbon steel in CO(2)-saturated water was very high and it increased with adding O(2) in the system due to the inhibition effect of O(2) on the formation of protective FeCO(3). It is noteworthy that corrosion took place in the water-saturated CO(2) phase under supercritical condition when no free water is present. The addition of O(2) increased the corrosion rates of carbon steel in water-saturated CO(2) phase. The addition of 0.8 bar SO(2) (1%) in the gas phase dramatically increased the corrosion rate of carbon steel from 0.38 to 5.6 mm/y. This then increased to more than 7 mm/y with addition of both O(2) and SO(2). SO(2) can promote the formation of iron sulfite hydrate (FeSO(3)·3H(2)O) on the steel surface which is less protective than iron carbonate (FeCO(3)), and it is further oxidized to become FeSO(4) and FeOOH when O(2) is present with SO(2) in the CO(2)-rich phase. The corrosion rates of 13Cr steel were very low compared with carbon steel in CO(2)-saturated water environments with O(2), whereas it was as high as carbon steel in a water-saturated CO(2) phase with O(2) and SO(2).

  16. 化学镀镍层缓蚀工艺研究%Study on Corrosion Inhibition Process of Electroless Nickel Coating

    Institute of Scientific and Technical Information of China (English)

    周慧云; 李继红; 刘斌; 曹祖军; 刘光明

    2014-01-01

    Objective To improve the corrosion resistance of electroless Ni-P coating. Methods Passivation treatment for corro-sion inhibition was conducted with phytic acid, sodium silicate, ammonium molybdate and hydrogen peroxide on the electroless Ni-P coating prepared on the steel substrate. The variation of corrosion resistance was investigated by dropping test and filter paper method. The optimal compositions of passivation solution were obtained by orthogonal experiments. Results The results showed that the complex inhibitor solution composed of phytic acid, sodium silicate, ammonium molybdate and hydrogen peroxide had good cor-rosion resistance in nitric acid dropping test. The electrochemical test showed that the corrosion current density of the composite passivation coating decreased and the impedance values increased by more than one order of magnitude. Conclusion The synergis-tic effect among the components in the passivation solution was observed. The optimized compositions of passivation solution were 6 g/ L of phytic acid, 6 g/ L of sodium silicate, 4 g/ L of ammonium molybdate, and 30 mL/ L of hydrogen peroxide.%目的:提高化学镀 Ni-P 镀层的耐蚀性能。方法在钢铁基体表面化学镀 Ni-P 镀层,采用植酸、硅酸钠、钼酸铵和双氧水中的一种或多种复配对镀层进行钝化处理。通过硝酸点滴法、贴滤纸法分析镀层耐蚀性的变化,并通过正交实验确定四种物质复配的最佳浓度。结果以植酸、硅酸钠、钼酸铵和双氧水为主要成分配制的复合缓蚀剂能使镀层耐硝酸效果良好,电化学实验表明,复合钝化膜的腐蚀电流密度降低和阻抗值增加都超过1个数量级。结论所研究的复合缓蚀剂各组分间存在协同效应,最佳配方为:6 g / L 植酸,6 g / L 硅酸钠,4 g / L 钼酸铵,30 mL/ L 双氧水。

  17. Electrochemical impedance spectroscopy analysis on effect of steel fiber addition on corrosion of steel rod in mortar; Morutaruchu no tekkin no fushoku ni oyobosu suchiru fuaiba tenka no eikyo no denki kagaku inpidansu supekutorosukopi ni yoru kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Sakashita, S.; Nakayama, T.; Hamasaki, Y.; Sugii, K. [Kobe Steel Ltd., Kobe (Japan); Sugimoto, K. [Tohoku University, Miyagi (Japan). Department of Metallurgy

    1999-11-15

    The effect of steel fiber (SF) addition to concrete on the corrosion behavior of steel reinforcement was studied by immersion corrosion tests in a 3 mass % NaCl solution for 363 day. The tests were conducted on steel rod/mortar specimens with different SF content (0-2 vol %), and corrosion potentials and electrochemical impedance of the specimens were measured during the tests. Corrosion potentials of the specimens were not so changed by the SF content. Electrochemical impedance measured at corrosion potentials was analyzed to get charge transfer resistance (R{sub ct}) using an equivalent electrical circuit with the R{sub ct}, Warburg impedance and a constant-phase element. The corrosion rate of steel rod in mortar estimated from the reciprocal of the R{sub ct} decreased with increasing of SF content in mortar, and correlated well with the rust area of steel rod measured after immersion corrosion tests. This shows that the electrochemical impedance measurement is the useful diagnosis method of corrosion of steel in concrete. The corrosion inhibition of steel rod in mortar by the SF addition was thought to be attributed to the consumption of dissolved oxygen by the corrosion of SF in mortar. (author)

  18. Effect of Chemical Corrosion on the Mechanical Characteristics of Parent Rocks for Nuclear Waste Storage

    Directory of Open Access Journals (Sweden)

    Tielin Han

    2016-01-01

    Full Text Available Long-term immersion was adopted to explore the damage deterioration and mechanical properties of granite under different chemical solutions. Here, granite was selected as the candidate of parent rocks for nuclear waste storage. The physical and mechanical properties of variation regularity immersed in various chemical solutions were analyzed. Meanwhile, the damage variable based on the variation in porosity was used in the quantitative analysis of chemical damage deterioration degree. Experimental results show that granite has a significant weakening tendency after chemical corrosion. The fracture toughness KIC, splitting tensile strength, and compressive strength all demonstrate the same deteriorating trend with chemical corrosion time. However, a difference exists in the deterioration degree of the mechanical parameters; that is, the deterioration degree of fracture toughness KIC is the greatest followed by those of splitting tensile strength and compressive strength, which are relatively smaller. Strong acid solutions may aggravate chemical damage deterioration in granite. By contrast, strong alkaline solutions have a certain inhibiting effect on chemical damage deterioration. The chemical solutions that feature various compositions may have different effects on chemical damage degree; that is, SO42- ions have a greater effect on the chemical damage in granite than HCO3- ions.

  19. Inhibition of corrosion of zinc by Cr(VI)and Cr(III) treatments

    NARCIS (Netherlands)

    Zhang, X.; Bos, C. van den; Hovestad, A.; Terryn, H.; Wit, J.H.W. de

    2007-01-01

    The corrosion behavior of Cr(VI) and Cr(III) treated zinc has been studied using scanning Kelvin probe (SKP), potentiodynamic polarization and elctrochemical impedance spectroscopy (EIS). The Volta potentials measured on the Cr(VI) or the CR(III)-A treated zinc area by SKP in a humid chamber are

  20. Inhibition of corrosion of zinc by Cr(VI)and Cr(III) treatments

    NARCIS (Netherlands)

    Zhang, X.; Bos, C. van den; Hovestad, A.; Terryn, H.; Wit, J.H.W. de

    2007-01-01

    The corrosion behavior of Cr(VI) and Cr(III) treated zinc has been studied using scanning Kelvin probe (SKP), potentiodynamic polarization and elctrochemical impedance spectroscopy (EIS). The Volta potentials measured on the Cr(VI) or the CR(III)-A treated zinc area by SKP in a humid chamber are mor

  1. Intergranular stress corrosion cracking of type 304 stainless steels treated with inhibitive chemicals in high temperature pure water

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, T.K. [Nuclear Science and Technology Development Center, National Tsing-Hua Univ. Taiwan (China); Lee, M.Y.; Tsai, C.H. [Department of Engineering and System Science, National Tsing-Hua Univ. Taiwan (China)

    2002-07-01

    Electrochemical potentiodynamic polarizations, electrochemical corrosion potential (ECP) measurements and slow strain rate tensile (SSRT) tests were conducted to investigate the intergranular stress corrosion cracking (IGSCC) characteristics of Type 304 stainless steels treated with inhibitive chemicals in simulated boiling water reactor (BWR) environments. A number of thermally sensitized specimens were prepared and were pre-oxidized in a 288 C environment with the presence of 300 ppb dissolved oxygen for 360 hours. Most of the specimens were then treated with various chemicals including powdered zirconium oxide (ZrO{sub 2}), powdered titanium oxide (TiO{sub 2}), and zirconyl nitrate [ZrO(NO{sub 3}){sub 2}] via static immersion at 90 C, 150 C, and 200 C. Test environments were specifically designed in a circulation loop to create a dissolved oxygen concentration of 300 ppb. Test results showed that the corrosion current densities of all treated specimens were lower than that of the untreated, pre-oxidized specimen at ambient temperature in a solution mixed with 1 mM K{sub 3}Fe(CN){sub 6} and 1 mM K{sub 4}Fe(CN){sub 6}. The ECPs of the treated specimens could be lower or higher than that of the pre-oxidized one at 288 C, depending upon the type of treating chemical and the treating temperature. In addition, IGSCC was observed on all specimens (treated or untreated) in the same environment. However, the untreated specimen exhibited lower elongation, shorter failure time, and more secondary cracks on the side surfaces. It was therefore suggested that inhibitive chemicals such as ZrO{sub 2}, TiO{sub 2}, and ZrO(NO{sub 3}){sub 2} did provide a certain degree of enhancement in improving the mechanical behavior of the treated specimens and in prolonging the IGSCC initiation time. (authors)

  2. Inhibition of copper corrosion by the formation of Schiff base self-assembled monolayers

    Science.gov (United States)

    Zhang, Jing; Liu, Zheng; Han, Guo-Cheng; Chen, Shi-Liang; Chen, Zhencheng

    2016-12-01

    Self-assembled monolayers (SAMs) of 4-((2-thiophenecarboxylic acid hydrazide) methylene) benzoic acid (HD2) (denoted as HD2-SAMs) were formed on copper surface. The SAMs were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. Polarization curve and weight loss methods indicated that the highest inhibition efficiency was 93.9% for CO2-saturated simulative oilfield water at a self-assembled time of 3 h. Potential-time curve, electrochemical impedance tests showed that HD2-SAMs on copper surface exhibited excellent inhibition effect at 30 °C. The adsorption behavior of HD2-SAMs on the copper surface followed the Langmuir adsorption isotherm, which was indicative of typically chemical adsorption. Quantum chemistry calculation showed that O and N atoms can interact with Cu atoms by coordination bonds which were the mainly active area of the adsorption of HD2 molecules.

  3. Corrosion effects of runway de-icing chemicals on aircraft alloys and coatings

    Energy Technology Data Exchange (ETDEWEB)

    Huttunen-Saarivirta, E., E-mail: elina.huttunen-saarivirta@tut.fi [Department of Materials Science, Tampere University of Technology, P.O. Box 589, FI-33101 Tampere (Finland); Kuokkala, V.-T.; Kokkonen, J. [Department of Materials Science, Tampere University of Technology, P.O. Box 589, FI-33101 Tampere (Finland); Paajanen, H. [Finnish Air Force Materiel Command, Plans Division, Support Systems Section, P.O. Box 210, FI-33101 Tampere (Finland)

    2011-03-15

    Research highlights: {yields} Corrosion effects of urea and four new runway de-icing chemicals on Al alloy 2024, Mg alloy RZ5 and cadmium-plated and subsequently chromate-treated steel 4340 were examined by three types of corrosion tests. {yields} Corrosion effects of urea on Al alloy 2024 were more pronounced than those of the new de-icing chemicals, with pitting corrosion being evident in urea in all tests. {yields} The rate of corrosion in Mg alloy RZ5 was often higher in new de-icing chemicals than in urea, although the form of corrosion was the same in most cases, i.e., general corrosion. {yields} Corrosion effects of the five runway de-icing chemicals on cadmium-plated and subsequently chromate-treated steel 4340 were slightly different in all three tests, but some loss of the coating layers was detected in all cases. - Abstract: Corrosion effects of five runway de-icing chemicals on aluminium alloy 2024, magnesium alloy RZ5 and cadmium-plated and subsequently chromate-treated steel 4340 were investigated by cyclic polarisation measurements, open circuit potential monitoring and cyclic chemical exposure tests. The runway de-icing chemicals included in the study contained urea, which has a long history as a runway de-icing chemical, and four new commercial de-icing chemicals, which were based on betaine and potassium formate. Corrosion effects of urea on aluminium alloy 2024 were more pronounced than those of the new de-icing chemicals. In urea, the breakdown potential, indicating the onset of pitting, was clearly distinguishable in the cyclic polarisation curve and pitting corrosion was detected on the specimen surface after all three types of tests. Weight losses during the chemical exposure tests were also higher for urea than for the other four chemicals, where pitting corrosion was only occasionally detected. The opposite was true in the case of magnesium alloy RZ5: although the alloy experienced general corrosion in each de-icing chemical included in the

  4. The Inhibition of Aluminum Corrosion in Sulfuric Acid by Poly(1-vinyl-3-alkyl-imidazolium Hexafluorophosphate

    Directory of Open Access Journals (Sweden)

    Paulina Arellanes-Lozada

    2014-08-01

    Full Text Available Compounds of poly(ionic liquids (PILs, derived from imidazole with different alkylic chain lengths located in the third position of the imidazolium ring (poly(1-vinyl-3-dodecyl-imidazolium (PImC12, poly(1-vinyl-3-octylimidazolium (PImC8 and poly(1-vinyl-3-butylimidazolium (PImC4 hexafluorophosphate were synthesized. These compounds were tested as corrosion inhibitors on aluminum alloy AA6061 in diluted sulfuric acid (0.1–1 M H2SO4 by weight loss tests, polarization resistance measurements and inductively coupled plasma optical emission spectroscopy. Langmuir’s isotherms suggested film formation on bare alloy while standard free energy indicated inhibition by a physisorption process. However, compound efficiencies as inhibitors ranked low (PImC12 > PImC8 > PImC4 to reach 61% for PImC12 in highly diluted acidic solution. Apparently, the high mobility of sulfates favored their adsorption in comparison to PILs. The surface film displayed general corrosion, and pitting occurred as a consequence of PILs’ partial inhibition along with a continuous dissolution of defective patchy film on formation. A slight improvement in efficiency was displayed by compounds having high molecular weight and a long alkyl chain, as a consequence of steric hindrance and PIL interactions.

  5. Experimental and atomistic simulation studies of corrosion inhibition of copper by a new benzotriazole derivative in acid medium

    Energy Technology Data Exchange (ETDEWEB)

    Khaled, K.F. [Electrochemistry Research Laboratory, Chemistry Department, Ain Shams University, Roxy, Cairo 11711 (Egypt)], E-mail: khaledrice2003@yahoo.com

    2009-07-15

    The efficiency of N-(2-thiazolyl)-1H-benzotriazole-1-carbothioamide (TBC) as a non-toxic corrosion inhibitor for copper in 0.5 M HCl has been tested by weight loss and electrochemical techniques. Electrochemical techniques show that TBC is a mixed-type inhibitor and its inhibition mechanism on copper surface is adsorption assisted by H-bond formation. Impedance measurements show a wide peak presumably given by more than one time constant in the presence of TBC. Also, impedance results show that the values of CPEs (constant phase elements) tend to decrease and both polarization resistance and inhibition efficiency tend to increase with increasing of TBC concentration due to an increase in the electric double layer. Monte Carlo simulations incorporating molecular mechanics and molecular dynamics show that the TBC adsorb on the copper surface firmly through the thiazolyl and carbothioamide groups, the adsorption energy as well as hydrogen bond length have been calculated for both TBC and benzotriazole (BTA) for comparison. Quantum chemical calculations reveal that TBC has higher HOMO, lower LUMO, lower energy gap and lower dipole moment ({mu}) than BTA, which proves that TBC is better copper corrosion inhibitor compared with BTA in 0.5 M HCl.

  6. Inhibition of Mild Steel Corrosion in 1M H2SO4 Medium by Benzimidazole Mannich bases

    Directory of Open Access Journals (Sweden)

    P. M. Dasami

    2015-03-01

    Full Text Available The corrosion inhibition behaviour of two synthesized Mannich bases has been investigated for mild steel in 1M H2SO4 by weight loss and electrochemical techniques.The inhibition efficiency depends on concentration of the inhibitor and temperature. The inhibitors function by adsorption on mild steel surface and obey Langmuir isotherm indicating monolayer adsorption on the surface. Thermodynamic parameters show that the adsorption of the inhibitors occurs through electrostatic interaction. Polarization studies reveal that the inhibitors behave as mixed type in 1M H2SO4 affecting both anodic metal dissolution and cathodic hydrogen evolution. SEM studies show the formation of surface adsorptive film of the Mannich bases on the mild steel surface.

  7. Effect of layerwise structural inhomogeneity on stress- corrosion cracking of steel tubes

    Science.gov (United States)

    Perlovich, Yu A.; Krymskaya, O. A.; Isaenkova, M. G.; Morozov, N. S.; Fesenko, V. A.; Ryakhovskikh, I. V.; Esiev, T. S.

    2016-04-01

    Based on X-ray texture and structure analysis data of the material of main gas pipelines it was shown that the layerwise inhomogeneity of tubes is formed during their manufacturing. The degree of this inhomogeneity affects on the tendency of tubes to stress- corrosion cracking under exploitation. Samples of tubes were cut out from gas pipelines located under various operating conditions. Herewith the study was conducted both for sections with detected stress-corrosion defects and without them. Distributions along tube wall thickness for lattice parameters and half-width of X-ray lines were constructed. Crystallographic texture analysis of external and internal tube layers was also carried out. Obtained data testifies about considerable layerwise inhomogeneity of all samples. Despite the different nature of the texture inhomogeneity of gas pipeline tubes, the more inhomogeneous distribution of texture or structure features causes the increasing of resistance to stress- corrosion. The observed effect can be explained by saturation with interstitial impurities of the surface layer of the hot-rolled sheet and obtained therefrom tube. This results in rising of lattice parameters in the external layer of tube as compared to those in underlying metal. Thus, internal layers have a compressive effect on external layers in the rolling plane that prevents cracks opening at the tube surface. Moreover, the high mutual misorientation of grains within external and internal layers of tube results in the necessity to change the moving crack plane, so that the crack growth can be inhibited when reaching the layer with a modified texture.

  8. Effects of acidity and alkalinity on corrosion behaviour of Al-Zn-Mg based anode alloy

    Science.gov (United States)

    Ma, Jingling; Wen, Jiuba; Li, Quanan; Zhang, Qin

    2013-03-01

    Effects of 1 M HCl, 0.6 M NaCl with different pH values and 4 M NaOH solutions on the corrosion behaviour of Al-5Zn-1Mg-0.02In-0.05Ti-0.5Mn (wt%) alloy have been investigated using measurements of self-corrosion, potentiodynamic polarization, cyclic polarization experiment combined with open circuit potential technique and scanning electron microscopy. The corrosion behaviour of the alloy was found to be dependant on the Cl-, OH- ions and pH value. In acidic or slightly neutral solutions, general and pitting corrosion occurred simultaneously. In contrast, exposure to alkaline solutions results in general corrosion which was traced back to the dissolution of the resistive oxidation film on the surface of the alloy. Experience revealed that the alloy was susceptible to pitting corrosion in all chloride solution. The alloy undergoes two types of localized corrosion process, leading to the formation of hemispherical and crystallographic pits. Polarization resistance measurements which are in good agreement with those of self-corrosion, show that the corrosion kinetic is minimized in slightly neutral solutions (pH = 7).

  9. Extending surface Raman spectroscopy to transition metals for practical applications IV. A study on corrosion inhibition of benzotriazole on bare Fe electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Yao, J.L.; Ren, B.; Huang, Z.F.; Cao, P.G.; Gu, R.A.; Tian, Z.-Q

    2003-04-20

    The emphasis in the present study was placed on developing Raman spectroscopy into a versatile technique, which offers an opportunity for investigating the inhibition effect on the corrosion process of bare Fe surfaces. Several surface pretreatments have been developed to bare Fe electrodes in order to obtain a surface of optimal surface-enhanced Raman scattering (SERS). It has been shown that the surface enhancement factor (SEF) of a bare Fe electrode can reach about two to three orders, depending on the roughening procedure. Therefore, SERS can be extended successfully to study some Fe electrode systems of practical importance. Here we present a study on the film formation process and inhibition effect of benzotriazole (BTA) on Fe surfaces. The results show that BTA interacts with Fe surface through its two N atoms of the triazole ring and surface complex polymer of [Fe{sub n}(BTA){sub p}]{sub m} is formed, which may suppress the dissolution and oxidation of Fe effectively. In addition, the solution pH, the synergetic effect of I{sup -} with BTA was revealed to have a significant influence on the inhibition efficiency.

  10. Corrosion and protection in reinforced concrete: pulse cathodic protection: an improved cost-effective alternative

    NARCIS (Netherlands)

    Koleva, D.A.

    2007-01-01

    Corrosion and protection in reinforced concrete. Pulse cathodic protection: an improved cost-effective alternative. The aim of the research project was to study the possibilities for establishing a new or improved electrochemical method for corrosion prevention/protection for reinforced concrete. Th

  11. An overview of NiTi shape memory alloy: Corrosion resistance and antibacterial inhibition for dental application

    Energy Technology Data Exchange (ETDEWEB)

    Fadlallah, Sahar A., E-mail: sahar.fadlallah@yahoo.com [Materials and Corrosion Lab. (MCL), Faculty of Science, Taif University, Taif (Saudi Arabia); Chemistry Department, Faculty of Science, Cairo University, Cairo (Egypt); El-Bagoury, Nader [Materials and Corrosion Lab. (MCL), Faculty of Science, Taif University, Taif (Saudi Arabia); Casting Technology Lab., Manufacturing Technology Dept., CMRDI, P.O. Box 87, Helwan, Cairo (Egypt); Gad El-Rab, Sanaa M.F. [Biotechnology Department, Faculty of Science, Taif University, Taif (Saudi Arabia); Botany Department, Faculty of Science, Asuit University, Asuit (Egypt); Ahmed, Rasha A. [Materials and Corrosion Lab. (MCL), Faculty of Science, Taif University, Taif (Saudi Arabia); Forensic Chemistry Laboratories, Medico Legal Department, Ministry of Justice, Cairo (Egypt); El-Ousamii, Ghaida [Materials and Corrosion Lab. (MCL), Faculty of Science, Taif University, Taif (Saudi Arabia)

    2014-01-15

    Highlights: • Evaluate the corrosion resistance of NiTi alloy by using electrochemical techniques. • Estimate the Antibacterial inhibition rate of NiTi alloy. • Assessment the mechanical properties of NiTi from the hardness measurements. • Comparsion the microstructures of cast NiTi with Ti, this indicate the role of Ni to change the behavior of alloy in oral environment. • Advise drinking green tea in small quantities in small quantities in the event of present NiTi alloy in the oral cavity. • Recommendation to use NiTi for dental application. -- Abstract: Nowadays, Nickel–titanium nearly equiatomic is considered as one of the best biomaterials. The aim of the present work deals with the evolution of the electrochemical behavior of NiTi in simulated oral environment. The hardness, microstructures corrosion resistance and antibacterial performance of NiTi alloy were compared with pure titanium. The hardness of NiTi is twice the hardness of pure titanium. Electrochemical techniques were used to detect the corrosion resistance of both biomaterials in Hank’s solution containing (−)-epigallocatechin gallate (EGCG) which used to simulate the oral environment. In the physiological solution selected for the present study, the impedance spectroscopy (EIS) results showed that EGCG sharply increase the corrosion resistance of NiTi from 129 kΩ cm{sup 2} to 1.10 T Ω cm{sup 2} while slowly increase the corrosion resistance of pure titanium from 9.4 kΩ cm{sup 2} to 11.3 kΩ cm{sup 2} during the duration time of immersion at 37 °C. The plate-counting method was used to evaluate the antibacterial performance against Staphylococcus aureus (ATCC 6538). Among the two specimens of biomaterials studied, the antibacterial performance results revealed that the NiTi alloy is better than the pure titanium. The morphology and chemical structure of NiTi and Ti samples were systematically investigated by scanning electron microscope (SEM) and energy dispersive X

  12. Kinetic Study of the Effect of Selected Surfactants on Corrosion of Copper

    Directory of Open Access Journals (Sweden)

    Howaida M. El-Kashlan

    2008-01-01

    Full Text Available The rates of copper corrosion were determined by measuring the limiting current of anodic dissolution of copper in phosphoric acid in presence and in absence of cetyl trimethyl ammonium bromide (CTAB and cetyl pyridinium bromide (CPYB. The rate of corrosion is found to decrease by increasing the concentration of the surfactant. The percentage of inhibition ranged from 1.85 to 33.97% depending on the type of surfactant and its concentration. Increasing the copper electrode height, and concentration of H3PO4 decreases the rate of copper corrosion. The investigated adsorption isotherms indicate that the two surfactants fit Langmuir and Flory Huggins isotherm. The thermodynamic parameters show that corrosion is a diffusion controlled process. The dimensional analysis method was used to obtain the overall mass transfer correlations under the study conditions.

  13. The effect of carbon content on mechanical properties, failure and corrosion resistance of deposited chromium metal

    Directory of Open Access Journals (Sweden)

    Леонід Кімович Лещинськiй

    2017-06-01

    Full Text Available It has been shown that if choosing a metal composition for surfacing rolls and rollers of continuous casting machines, both the carbon impact on the mechanical and functional properties and the critical values of the chromium concentration, which determine the corrosion resistance of the metal with regard to electrochemical corrosion theory, should be considered as well. The paper studied the effect of chromium and carbon steel the X5-X12 type on the structure, technological strength, mechanical properties, fracturing resistance and corrosion resistance of the weld metal. The composition of chromium tool steels (deposited metal (X5-used for the rolls of hot rolling mills and (X12-used for continuous casting machines rollers correspond to these values. The impact of carbon on the properties of the deposited metal containing chromium was considered by comparing the data for both types of the deposited metal. It was found that for both types of the deposited metal (X5 and X12, the limiting value of the carbon content, providing an optimal combination of strength, ductility, failure resistance is the same. If the carbon content is more than the limiting value – (0,25% the technological strength and failure resistance of the deposited metal significantly reduce. With increasing carbon content from 0,18 to 0,25% the martensite structure has a mixed morphology – lath and plate. The strength and toughness of the deposited metal grow. Of particular interest is simultaneous increase in the specific work of failure resulted from crack inhibition at the boundary with far less solid and more ductile ferrite. As for the 5% chromium metal, the X12 type composition with 0,25% C, is borderline. With a further increase in the carbon content of the metal both ductility and failure resistance sharply decrease and with 0,40% C the growth rate of fatigue crack increases by almost 1,5 times

  14. Sol-gel hybrid films based on organosilane and montmorillonite for corrosion inhibition of AA2024.

    Science.gov (United States)

    Dalmoro, V; dos Santos, J H Z; Armelin, E; Alemán, C; Azambuja, D S

    2014-07-15

    The present work reports the production of films on AA2024-T3 composed of vinyltrimethoxysilane (VTMS)/tetraethylorthosilicate (TEOS) with incorporation of montmorillonite (sodium montmorillonite and montmorillonite modified with quaternary ammonium salt, abbreviated Na and 30B, respectively), generated by the sol-gel process. According to FT-IR analyses the incorporation of montmorillonite does not affect silica network. Electrochemical characterization was performed by electrochemical impedance spectroscopy measurement in 0.05 mol L(-1) NaCl solution. Results indicate that montmorillonite incorporation improves the corrosion protection compared to the non-modified system. Scanning electron microscopy micrographs reveal that high concentrations of montmorillonite provide agglomerations on the metallic surface, which is in detriment of the anticorrosive performance. The VTMS/TEOS/30B films with the lowest concentration (22 mg L(-1)) of embedded clay provide the highest corrosion protection.

  15. Effect of high repetition laser shock peening on biocompatibility and corrosion resistance of magnesium

    Science.gov (United States)

    Caralapatti, Vinodh Krishna; Narayanswamy, Sivakumar

    2017-02-01

    Magnesium, as a biomaterial has the potential to replace conventional implant materials owing to its numerous advantages. However, high corrosion rate is a major obstacle that has to be addressed for its implementation as implants. This study aims to evaluate the feasibility and effects of High Repetition Laser Shock Peening (HRLSP) on biocompatibility and corrosion resistance of Mg samples and as well as to analyze the effect of operational parameters such as peening with overlap on corrosion rate. From the results obtained using hydrogen evolution and mass loss methods, it was found that corrosion rates of both 0% overlap and 66% overlap peened samples reduced by more than 50% compared to that of unpeened sample and sample peened with 66% overlap exhibited least corrosion. The biocompatibility of peened Mg samples was also enhanced as there was neither rapid pH variation nor large hydrogen bubble formation around samples.

  16. Effectiveness of concrete to protect steel reinforcement from corrosion in marine structures

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    A laboratory evaluation of how variations in cover design and properties determine its effectiveness in controlling corrosion in reinforced concretes in marine structures is described. The effect of concrete type and composition on chloride ingress and corrosion rate was studied for four simulated marine environments. Contrary to expectation, significant corrosion did not take place in reinforcement placed at 30 mm cover after 30 months exposure, even in concretes of lower strengths and higher water/cement ratios than mixes employed in the North Sea. Unexpected crevice corrosion let to the exclusion of electrochemical data and restricted the opportunity of correlating the properties of the cover with the onset and rate of corrosion of reinforcement. The project did, however, provide valuable data on in situ strength, moisture content, permeability, resistivity, carbonation and rate of chloride ingress. Limited data is also available on the pore structure of the cover and its oxygen diffusion characteristics. It is emphasised that all results refer to uncracked concrete. (author).

  17. Analysis of electrochemical noise (ECN) data in time and frequency domain for comparison corrosion inhibition of some azole compounds on Cu in 1.0 M H2SO4 solution

    Science.gov (United States)

    Ramezanzadeh, B.; Arman, S. Y.; Mehdipour, M.; Markhali, B. P.

    2014-01-01

    In this study, the corrosion inhibition properties of two similar heterocyclic compounds namely benzotriazole (BTA) and benzothiazole (BNS) inhibitors on copper in 1.0 M H2SO4 solution were studied by electrochemical techniques as well as surface analysis. The results showed that corrosion inhibition of copper largely depends on the molecular structure and concentration of the inhibitors. The effect of DC trend on the interpretation of electrochemical noise (ECN) results in time domain was evaluated by moving average removal (MAR) method. Accordingly, the impact of square and Hanning window functions as drift removal methods in frequency domain was studied. After DC trend removal, a good trend was observed between electrochemical noise (ECN) data and the results obtained from EIS and potentiodynamic polarization. Furthermore, the shot noise theory in frequency domain was applied to approach the charge of each electrochemical event (q) from the potential and current noise signals.

  18. The effects of argon ion bombardment on the corrosion resistance of tantalum

    Science.gov (United States)

    Ramezani, A. H.; Sari, A. H.; Shokouhy, A.

    2017-02-01

    Application of ion beam has been widely used as a surface modification method to improve surface properties. This paper investigates the effect of argon ion implantation on surface structure as well as resistance against tantalum corrosion. In this experiment, argon ions with energy of 30 keV and in doses of 1 × 1017-10 × 1017 ions/cm2 were used. The surface bombardment with inert gases mainly produces modified topography and morphology of the surface. Atomic Force Microscopy was also used to patterned the roughness variations prior to and after the implantation phase. Additionally, the corrosion investigation apparatus wear was applied to compare resistance against tantalum corrosion both before and after ion implantation. The results show that argon ion implantation has a substantial impact on increasing resistance against tantalum corrosion. After the corrosion test, scanning electron microscopy (SEM) analyzed the samples' surface morphologies. In addition, the elemental composition is characterized by energy-dispersive X-ray (EDX) analysis. The purpose of this paper was to obtain the perfect condition for the formation of tantalum corrosion resistance. In order to evaluate the effect of the ion implantation on the corrosion behavior, potentiodynamic tests were performed. The results show that the corrosion resistance of the samples strongly depends on the implantation doses.

  19. Effect of tannic acid on corrosion of mild steel in boiler system. Boiler kei deno nanko no fushoku ni taisuru tanninsan no fushoku yokusei koka

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Y.; Imahama, T.; Wake, T. (Japan Organo Co. Ltd., Tokyo (Japan)); Sekine, I.; Kawase, T.; Shiromoto, T.; Yuasa, M. (Science University of Tokyo, Tokyo (Japan). Facutly of Science and Technology)

    1992-08-15

    Tannic acid was studied as a corrosion inhibitor in boiler system from the view points of safety and economy. Hydrolytic tannin extracted from gallnut was used as tannic acid and gallic acid, hydrazine and sodium sulfite were used as the reference samples. A mild steel (JIS SS 400) was used for the test steel. The following test were made in the comparative experiments: the measurement of polarization curve of the mild steel by electrochemical method, and the analyses of surface change of mild steel by using a scanning tunnelling microscope and the X ray photoelectron spectrography, etc. Tannic acid exhibits the corrosion inhibiting effect identical to those of reference samples under alkaline condition. Tannic acid has the inhibiting effect even under high temperature and pressure condition and the maximum inhibition efficiency is 97%. Tannic acid exhibits the adsorption type inhibition under the neutral condition. Under alkaline condition, tannic acid inhibits corrosion of steel not only as an effective oxygen scavenger but also an effective passivating effect forming Fe[sub 3]O[sub 4]. Tannic acid is concluded as an effective oxygen inhibitor. 17 refs., 11 figs.

  20. Corrosion inhibition of carbon steel pipelines by some novel Schiff base compounds during acidizing treatment of oil wells studied by electrochemical and quantum chemical methods

    Science.gov (United States)

    Abd El-Lateef, Hany M.; Abu-Dief, Ahmed M.; Mohamed, Mounir A. A.

    2017-02-01

    Three novel Schiff bases compounds were prepared and their structures were characterized by X-ray, 13C-NMR, 1H-NMR, mass, UV-Vis, FT-IR, spectral data and elemental analyses. The corrosion inhibition of the investigated inhibitors towards carbon steel in 15% HCl was investigated by using electrochemical measurements (EIS, LPR corrosion rate and Tafel plots), SEM, EDX and quantum chemical methods. The results showed that, the inhibitors are efficient mixed type corrosion inhibitors, and their inhibition performance increased with the rise of inhibitor concentration and temperature. The adsorption of the inhibitors on steel surface was found to obey Langmuir's adsorption isotherm and chemisorption. Quantum chemical calculations provide good support to empirical results.

  1. 3D study of intermetallics and their effect on the corrosion morphology of rheocast aluminium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Mingo, B. [Departamento de Ciencia de Materiales, Facultad de Ciencias Químicas, Universidad Complutense, 28040, Madrid (Spain); Arrabal, R., E-mail: rarrabal@ucm.es [Departamento de Ciencia de Materiales, Facultad de Ciencias Químicas, Universidad Complutense, 28040, Madrid (Spain); Pardo, A.; Matykina, E. [Departamento de Ciencia de Materiales, Facultad de Ciencias Químicas, Universidad Complutense, 28040, Madrid (Spain); Skeldon, P. [Corrosion and Protection Group, School of Materials, The University of Manchester, Manchester M13 9PL (United Kingdom)

    2016-02-15

    In the present study, the effect of heat treatment T6.1 on the microstructure and corrosion behaviour of rheocast aluminium alloy A356 is investigated on the basis of 2D/3D characterization techniques and electrochemical and SKPFM measurements. Heat treatment strengthens the α-Al matrix, modifies the intermetallic particles and spheroidizes eutectic Si. These changes do not modify significantly the corrosion behaviour of the alloy. 3D SEM-Tomography clearly shows that the corrosion advances in the shape of narrow paths between closely spaced intermetallics without a major influence of eutectic Si. - Highlights: • T6.1 spheroidizes Si, strengthens the matrix and modifies the intermetallics. • Electrochemical behaviour of untreated and heat-treated alloys is similar. • 3D SEM-Tomography provides additional information on the corrosion morphology. • Corrosion advances as paths between intermetallics with little influence of Si.

  2. The effect of heat treatment on the corrosion behaviour of 319 aluminium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Panagopoulos, C.N.; Georgiou, E.P.; Giannakopoulos, K.I. [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, Athens (Greece)

    2009-06-15

    The effect of various heat treatments on the corrosion behaviour of 319 T1 cast aluminium alloy was investigated. From this alloy, specimens were heat treated in T5, T6 and two steps solution heat treatment T6 conditions and afterwards were subjected to electrochemical corrosion in a 0.1 M NaCl solution (pH = 12). From the above treatments, T5 heat treatment did not improve the corrosion resistance of the as-received alloy in contrast to T6 heat treatment which improved the corrosion resistance of the same alloy. However, two steps solutionizing T6 treatment showed the best corrosion resistance of the aluminium alloy. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  3. Potential Effects of Corrosion Damage on the Performance of Reinforced Concrete Member

    Directory of Open Access Journals (Sweden)

    Mohd Noh Hamidun

    2016-01-01

    Full Text Available Corrosion of steel in reinforced concrete is one of the most serious issues for the owners. The main consequences of this phenomenon include loss of cross section of steel area, induced the expansive pressure which caused cracking of concrete, spalling and delaminating of the concrete cover. Thus, it reduces the bond strength between steel reinforcing bar and concrete, and deteriorates the strength of whole structure. In this study, a non-linear finite element analysis was conducted to investigate the potential effects of corrosion damage. A series of corroded reinforced concrete cylinder is used in the parametric study to assess the influence of different level of corrosion to the structural performance. As a result, a clear picture of corrosive expansion was investigated and the relationship between the expansive pressure and the degree of corrosion was identified to be the important factors of the structural deterioration.

  4. Fretting corrosion of CoCr alloy: Effect of load and displacement on the degradation mechanisms.

    Science.gov (United States)

    Bryant, Michael; Neville, Anne

    2017-02-01

    Fretting corrosion of medical devices is of growing concern, yet, the interactions between tribological and electrochemical parameters are not fully understood. Fretting corrosion of CoCr alloy was simulated, and the components of damage were monitored as a function of displacement and contact pressure. Free corrosion potential (Ecorr), intermittent linear polarisation resistance and cathodic potentiostatic methods were used to characterise the system. Interferometry was used to estimate material loss post rubbing. The fretting regime influenced the total material lost and the dominant degradation mechanism. At high contact pressures and low displacements, pure corrosion was dominant with wear and its synergies becoming more important as the contact pressure and displacement decreased and increased, respectively. In some cases, an antagonistic effect from the corrosion-enhanced wear contributor was observed suggesting that film formation and removal may be present. The relationship between slip mechanism and the contributors to tribocorrosion degradation is presented.

  5. Effect of laser surface melting on microstructure and corrosion characteristics of AM60B magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Cancan [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100039 (China); Liang, Jun, E-mail: jliang@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Zhou, Jiansong, E-mail: jszhou@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Wang, Lingqian [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Li, Qingbiao [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100039 (China)

    2015-07-15

    Highlights: • Laser surface melting was used on AM60B Mg alloy. • The microstructure, composition and corrosion behavior of the as-received and LSM treated specimens were compared. • The laser treated alloy exhibited better corrosion resistance than the as-received one in the long term. • A model of two different corrosion mechanisms was established. - Abstract: Surface modification of laser surface melting (LSM) was applied to the AM60B magnesium alloy using a 10 kW continuous-wave CO{sub 2} laser. The microstructure, composition and corrosion resistance of AM60B magnesium alloy after LSM treatment were investigated by using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and corrosion tests, respectively. Results showed that the LSM treatment produced a continuous and homogeneous modified layer with refined grains, enriched Al element and redistributed intermetallic compounds on AM60B alloy. The corrosion resistance of the AM60B alloy was enhanced by the LSM treatment. The enhancement of the corrosion resistance was mainly attributed to the reduced corrosion susceptibility of Al enriched α-Mg matrix and the barrier effect of uniformly distributed β-phase of the LSM modified layer.

  6. Effects of cold working on the pitting corrosion behavior s of AISI 304 stainless steels

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Kee Min; Kim, Jong Soo; Kim, Young Jun; Kwon, Houk Sang [KAIST, Daejon (Korea, Republic of)

    2015-12-15

    These microstructural changes by cold working can lead improvement of mechanical properties, however from a corrosion resistant point of view, the effects of cold working on the corrosion resistance of stainless steel have been argued. Several studies has been focused on the influence of cold working on the localized corrosion resistance of stainless steels. However, the opinions about the role of cold working on the localized corrosion resistance are highly in consistence. Some studies report that the pitting potential of austenitic stainless steels decreased with cold working level, on the other hands, other studies claimed that the pitting resistance was increased by cold working. Therefore it is necessary to verify how cold working affects pitting corrosion behavior of austenitic stainless steels. In the present work, the influence of cold working on the localized corrosion of AISI 304stainless steel in the neutral chloride solution was studied based on point defect model (PDM). The fraction of deformation-induced martensite was linearly increased with cold rolling level. Through cold rolling, the pitting potential was decreased, the metastable pitting event density was significantly increased and the repassivation potential was decreased. The overall localized corrosion resistance was decreased with cold working, however cold working level increased from 30 % to 50 %, localized corrosion resistance was recovered. The accumulated cation vacancy generates a void at metal/film interface, therefore film breakdown accelerates for cold worked alloys.

  7. Effect of Additional Sulfide and Thiosulfate on Corrosion of Q235 Carbon Steel in Alkaline Solutions

    Directory of Open Access Journals (Sweden)

    Bian Li Quan

    2016-01-01

    Full Text Available This paper investigated the effect of additional sulfide and thiosulfate on Q235 carbon steel corrosion in alkaline solutions. Weight loss method, scanning electron microscopy (SEM equipped with EDS, X-ray photoelectron spectroscopy (XPS, and electrochemical measurements were used in this study to show the corrosion behavior and electrochemistry of Q235 carbon steel. Results indicate that the synergistic corrosion rate of Q235 carbon steel in alkaline solution containing sulfide and thiosulfate is larger than that of sulfide and thiosulfate alone, which could be due to redox reaction of sulfide and thiosulfate. The surface cracks and pitting characteristics of the specimens after corrosion were carefully examined and the corrosion products film is flake grains and defective. The main corrosion products of specimen induced by S2− and S2O32- are FeS, FeS2, Fe3O4, and FeOOH. The present study shows that the corrosion mechanism of S2− and S2O32- is different for the corrosion of Q235 carbon steel.

  8. Effect of three component (aniline–formaldehyde and piperazine polymer on mild steel corrosion in hydrochloric acid medium

    Directory of Open Access Journals (Sweden)

    K.R. Ansari

    2015-10-01

    Full Text Available Polymeric Schiff base containing aniline, formaldehyde and piperazine (AFPP was synthesized and investigated as corrosion inhibitor for mild steel in 1 M HCl by weight loss measurements, electrochemical impedance spectroscopy (EIS and potentiodynamic polarization techniques. Experimental results showed that AFPP is an effective inhibitor for mild steel in 1 M HCl and exhibited 98% inhibition efficiency. Potentiodynamic polarization studies showed that AFPP is a mixed-type inhibitor predominantly cathodic type. The adsorption of inhibitor on the mild steel surface followed Langmuir adsorption isotherm. Activation energy (Ea, standard energy of adsorption (ΔG°ads, enthalpy of activation (ΔH∗, and entropy of activation (ΔS∗ of corrosion process were calculated and discussed.

  9. Physicochemical Characterization and Corrosion Inhibition Potential of Ficus benjamina (FB Gum for Aluminum in 0.1 M HCl

    Directory of Open Access Journals (Sweden)

    Nnabuk Okon EDDY

    2014-09-01

    Full Text Available Examination of the physical (colour, odour, pH, solubility in various solvent and chemical (GCMS and FTIR characteristics of Ficus benjamina gum revealed that the gum is yellowish in colour, mildly acidic and ionic in nature. Major constituents of the gums were found to be sucrose and d-glucose, which constituted 60.92 % of its chemical constituents while various carboxylic acids (albietic acid (1.00 %; hexadecanoic acid (4.41 %; 9-octadecanoic acid (1.00 %, stearic acid (3.01 %; oleic acid (0.10 %; octadecanoic acid (9.12 % and 6,13-pentacenequinone (20.43 % accounted for the remaining constituents. Functional groups identified in the gum were found to be those typical for other carbohydrates. From the knowledge of the chemical structures of compounds that constitutes the gum, the corrosion inhibition potentials of the gum was ascertained and from weight loss analysis, the gum was found to be an active inhibitor against the corrosion of aluminum in solutions of tetraoxosulphate (VI acid. The gum acted as an adsorption inhibitor that favours the mechanism of chemical adsorption and supported the Frumkin and Dubinin-Radushkevich adsorption models.

  10. Corrosion sensor

    Science.gov (United States)

    Glass, Robert S.; Clarke, Jr., Willis L.; Ciarlo, Dino R.

    1994-01-01

    A corrosion sensor array incorporating individual elements for measuring various elements and ions, such as chloride, sulfide, copper, hydrogen (pH), etc. and elements for evaluating the instantaneous corrosion properties of structural materials. The exact combination and number of elements measured or monitored would depend upon the environmental conditions and materials used which are subject to corrosive effects. Such a corrosion monitoring system embedded in or mounted on a structure exposed to the environment would serve as an early warning system for the onset of severe corrosion problems for the structure, thus providing a safety factor as well as economic factors. The sensor array is accessed to an electronics/computational system, which provides a means for data collection and analysis.

  11. Corrosive effects of gaseous contaminants on electrical equipment

    Energy Technology Data Exchange (ETDEWEB)

    Sera, K.; Hamamoto, J.; Kakimoto, H.

    1974-12-01

    The corrosion of outdoor apparatus by sulfur dioxide from industrial development and population growth is described. The corrosion of the field apparatus of the South Iwakuni transformer and the Shimoachi transformer is discussed. The results of SO/sub 2/ analysis are given, as well as those of corrosion tests of outdoor apparatus of the inner surface of the pipes and the compressed tanks, and an analysis of the waste gases around the terminals. The SO/sub 2/ concentration when the M.V. was 0.3-0.4 SO/sub 3/ mg/100 sq cm/day.

  12. Overview of Corrosion, Erosion, and Synergistic Effects of Erosion and Corrosion in the WTP Pre-treatment Facility

    Energy Technology Data Exchange (ETDEWEB)

    Imrich, K. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-27

    Corrosion is an extremely complex process that is affected by numerous factors. Addition of a flowing multi-phase solution further complicates the analysis. The synergistic effects of the multiple corrosive species as well as the flow-induced synergistic effects from erosion and corrosion must be thoroughly evaluated in order to predict material degradation responses. Public domain data can help guide the analysis, but cannot reliably provide the design basis especially when the process is one-of-a-kind, designed for 40 plus years of service, and has no viable means for repair or replacement. Testing in representative simulants and environmental conditions with prototypic components will provide a stronger technical basis for design. This philosophy was exemplified by the Defense Waste Processing Facility (DWPF) at the Savannah River Site and only after 15 plus years of successful operation has it been validated. There have been “hiccups”, some identified during the cold commissioning phase and some during radioactive operations, but they were minor and overcome. In addition, the system is robust enough to tolerate most flowsheet changes and the DWPF design allows minor modifications and replacements – approaches not available with the Hanford Waste Treatment Plant (WTP) “Black Cell” design methodology. Based on the available data, the synergistic effect between erosion and corrosion is a credible – virtually certain – degradation mechanism and must be considered for the design of the WTP process systems. Testing is recommended due to the number of variables (e.g., material properties, process parameters, and component design) that can affect synergy between erosion and corrosion and because the available literature is of limited applicability for the complex process chemistries anticipated in the WTP. Applicable testing will provide a reasonable and defensible path forward for design of the WTP Black Cell and Hard-to-Reach process equipment. These

  13. INHIBITION OF STRESS CORROSION CRACKING OF CARBON STEEL STORAGE TANKS AT HANFORD

    Energy Technology Data Exchange (ETDEWEB)

    BOOMER, K.D.

    2007-01-31

    The stress corrosion cracking (SCC) behavior of A537 tank steel was investigated in a series of environments designed to simulate the chemistry of legacy nuclear weapons production waste. Tests consisted of both slow strain rate tests using tensile specimens and constant load tests using compact tension specimens. Based on the tests conducted, nitrite was found to be a strong SCC inhibitor. Based on the test performed and the tank waste chemistry changes that are predicted to occur over time, the risk for SCC appears to be decreasing since the concentration of nitrate will decrease and nitrite will increase.

  14. Benzimidazole ligands in the corrosion inhibition for carbon steel in acid medium: DFT study of its interaction on Fe30 surface

    Science.gov (United States)

    Garcia-Ochoa, E.; Guzmán-Jiménez, S. J.; Hernández, J. Guadalupe; Pandiyan, Thangarasu; Vásquez-Pérez, José M.; Cruz-Borbolla, Julián

    2016-09-01

    The corrosion inhibition of N,N‧-bis(benzimidazole-2-yl-methyl)amine (L1) and N, N‧-bis(benzimidazole-2-yl-methyl)hydroxyethylamine (L2) was analyzed by electrochemical and theoretical methods. The data show that ligands form an adsorption layer over an iron surface, obeying the Langmuir isotherm (Δ Gads° of -32.96 kJ mol-1); the value are higher than -20 kJ mol-1 but less than -40 kJ mol-1, belonging to a conversion stage of physical adsorption to chemical adsorption or a comprehensive adsorption. This is consistent with fractal dimension of the electrode surface, estimated by an impedance depression angle of a semicircle that the surface is homogeneously covered by the formation of an inhibitor film. Furthermore, the electronic parameters of the ligands were analyzed by DFT, showing that L1 and L2 possesses corrosion inhibition properties that give up its p orbital electron density through its HOMO orbital to the metal LUMO to form an adsorption layer, and this has been proved theoretically by the interaction of ligands with Fe30. In addition, we have collected corrosion inhibition data for around 70 organic compounds reported in the literature, and the inhibition data plotted against different inhibitors, showing that amine ligands are good corrosion inhibitors.

  15. QSAR, DFT and quantum chemical studies on the inhibition potentials of some carbozones for the corrosion of mild steel in HCl.

    Science.gov (United States)

    Eddy, Nnabuk O; Ita, Benedict I

    2011-02-01

    Experimental aspects of the inhibition of the corrosion of mild steel in HCl solutions by some carbozones were studied using gravimetric, thermometric and gasometric methods, while a theoretical study was carried out using density functional theory, a quantitative structure-activity relation, and quantum chemical principles. The results obtained indicated that the studied carbozones are good adsorption inhibitors for the corrosion of mild steel in HCl. The inhibition efficiencies of the studied carbozones were found to increase with increasing concentration of the respective inhibitor. A strong correlation was found between the average inhibition efficiency and some quantum chemical parameters, and also between the experimental and theoretical inhibition efficiencies (obtained from the quantitative structure-activity relation).

  16. Investigation of the Corrosion Inhibition of CTAB and SDS on Carbon Steel Using an Experimental Design Strategy

    Science.gov (United States)

    Arjmand, Farzin; Wang, Jiamei; Zhang, Lefu

    2016-03-01

    The corrosion inhibition performance of sodium dodecyl sulfate (SDS) and cetyltrimethyl ammonium bromide (CTAB) on carbon steel was investigated in sodium chloride solutions. Using an experimental design strategy pH, chloride concentration, SDS/CTAB concentrations, and temperature were optimized by conducting only 30 experiments. The optimum value of each factor was obtained from the designed matrix of the experiments based on the lowest log I corr value calculated for each experimental condition. The 3D surface plots of the electrochemical response (log I corr) against each factor were constructed. The optimum conditions in which the lowest log I corr can be achieved were found as follows: pH 12, [Cl-] ≈ 1 M, [SDS] ≈ 200 ppm, [CTAB] ≈ 20 ppm, and T ≈ 10 °C.

  17. THERMODYNAMIC PROPERTIES AND CHARACTERIZATIONS OF CHITOSAN NANO-PARTICLES CORROSION INHIBITION ON THE SURFACE OF MILD STEELIN PEAT WATER MEDIA

    Directory of Open Access Journals (Sweden)

    Maria Erna

    2016-03-01

    Full Text Available The thermodynamic properties and characterizations of corrosion inhibition of chitosan nano-particles on the surface of mild steel in peat water media had been studied using weight loss method at temperatures of 30 - 50 oC. Steel surfaces were characterized by FT-IR spectra and SEM-EDS morphology photos. The research found that the value of DGo approaching -40 kJmol-1. The negative value of Gibbs free energy shows that the adsorption of inhibitor molecules on the surface of mild steel was achemisorption and it occurred spontaneously. Meanwhile, the values of DHo is also negative confirming that the adsoprtion of inhibitor molecules is an exothermic process. The value of DSo obtained is positive, it indicates hat the inhibitor molecules were adsorbed spontaneously on the mild steel surface. The analysis on mild steel surfaces hows that the nano-particle chitosan was adsorbed on the steel surface to form the complex compounds.

  18. The effect of superhydrophobic wetting state on corrosion protection--the AKD example.

    Science.gov (United States)

    Ejenstam, Lina; Ovaskainen, Louise; Rodriguez-Meizoso, Irene; Wågberg, Lars; Pan, Jinshan; Swerin, Agne; Claesson, Per M

    2013-12-15

    Corrosion is of considerable concern whenever metal is used as construction material. In this study we address whether superhydrophobic coatings could be used as part of an environmentally friendly corrosion-protective system, and specific focus is put on how the wetting regime of a superhydrophobic coating affects corrosion inhibition. Superhydrophobic alkyl ketene dimer (AKD) wax coatings were produced, using different methods resulting in hierarchical structures, where the coatings exhibit the same surface chemistry but different wetting regimes. Contact angle measurements, ESEM, confocal Raman microscopy, open circuit potential and electrochemical impedance spectroscopy were used to evaluate the surfaces. Remarkably high impedance values of 10(10)Ω cm(2) (at 10(-2) Hz) were reached for the sample showing superhydrophobic lotus-like wetting. Simultaneous open circuit potential measurements suggest that the circuit is broken, most likely due to the formation of a thin air layer at the coating-water interface that inhibits ion transport from the electrolyte to the metal substrate. The remaining samples, showing superhydrophobic wetting in the rose state and hydrophobic Wenzel-like wetting, showed less promising corrosion-protective properties. Due to the absence of air films on these surfaces the coatings were penetrated by the electrolyte, which allowed the corrosion reaction to proceed. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. The inhibitive mechanisms of nitrite and molybdate anions on initiation and propagation of pitting corrosion for mild steel in chloride solution

    Science.gov (United States)

    Zhou, Yong; Zuo, Yu

    2015-10-01

    The inhibitive mechanism of NO2- and MoO42- on the initiation and propagation of pitting corrosion for mild steel in chloride solution was studied with electrochemical methods and X-ray photoelectron spectroscopy (XPS). In 0.1 M NaCl solution both the addition of 0.2 M NaNO2 and 0.2 M Na2MoO4 effectively promoted passivation of mild steel. The passive film on the steel surface formed in NaCl + NO2- solution was composed of mainly γ-Fe2O3, and the film formed in NaCl + MoO42- solution was composed of two components: one is Fe2(MoO4)3 and the other is an oxide composed of Fe and O. The film formed in NaNO2 solution has lower oxygen vacancies and larger impedance than the film formed in Na2MoO4 solution. NO2- shows better inhibition to the initiation of pitting corrosion than MoO42-, which is attributed to its strong oxidability that results in the formation of a stable γ-Fe2O3 film. However, in NaNO2 solution, once a pit forms, it is more difficult to get repassivated than the situation in Na2MoO4 solution. The main reason is due to that in a propagating pit MoO42- anions result in increased solution pH value, but conversely NO2- anions lead to a decreased solution pH value within a pit.

  20. Corrosion inhibition in sputter-deposited thin-film systems using an intermediary layer of palladium

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, D.J.

    1979-03-01

    Accelerated and long term corrosion data are presented for the Ti--Ag and Cr--Au thin film metallization systems deposited by sputter deposition. The Ti--Ag conductor system is used as an electrode for high intensity silicon solar cells, and it has been found that an intermediate layer of 1500 A of palladium greatly improves the environmental stability of the metallization. The Cr--Au system has been used as an electrical circuit pattern, and thin films of palladium (100--300 A) have been incorporated to improve storage, processing, and service stability. A 100 A palladium intermediary did not affect the etch patterning of the Cr--Au metallization. It is observed that the introduction of palladium modifies the anodic potential of the active metal producing a passive oxide when exposed to an electrolytic environment. It is proposed that this modified oxide, at exposed pinhole sites, is responsible for the increased corrosion resistance when palladium is present as an intermediate layer for either the Ti--Ag or Cr--Au metallization systems.