WorldWideScience

Sample records for core-shell rubber csr

  1. Effects of Cryogenic Temperature on Fracture Toughness of Core-Shell Rubber (CSR) Toughened Epoxy Nanocomposites

    Science.gov (United States)

    Wang, J.; Cannon, S. A.; Magee, D.; Schneider, J. A.

    2008-01-01

    This study investigated the effects of core-shell rubber (CSR) nanoparticles on the mechanical properties and fracture toughness of an epoxy resin at ambient and liquid nitrogen (LN2) temperatures. Varying amounts of Kane Ace MX130 toughening agent were added to a commercially available EPON 862/Epikure W epoxy resin. Elastic modulus was calculated using quasi-static tensile data. Fracture toughness was evaluated by the resulting breaking energy measured in Charpy impact tests conducted on an instrumented drop tower. The size and distribution of the CSR nanoparticles were characterized using Transmission Electron Microscopy (TEM) and Small Angle X-ray Scattering (SAXS). Scanning Electron Microscopy (SEM) was used to study the fracture surface morphology. The addition of the CSR nanoparticles increased the breaking energy with negligible change in elastic modulus and ultimate tensile stress (UTS). At ambient temperature the breaking energy increased with increasing additions of the CSR nanoparticles, while at LN2 temperatures, it reached a maximum at 5 wt% CSR concentration. KEY WORDS: liquid nitrogen (LN2) properties, fracture toughness, core-shell rubber (CSR).

  2. Effects of Cryogenic Temperature on Fracture Toughness of Core-Shell Rubber (CSR) Toughened Epoxy Nanocomposites

    Science.gov (United States)

    Wang, J.; Cannon, S. A.; Magee, D.; Schneider, J. A.

    2008-01-01

    This study investigated the effects of core-shell rubber (CSR) nanoparticles on the mechanical properties and fracture toughness of an epoxy resin at ambient and liquid nitrogen (LN2) temperatures. Varying amounts of Kane Ace MX130 toughening agent were added to a commercially available EPON 862/Epikure W epoxy resin. Elastic modulus was calculated using quasi-static tensile data. Fracture toughness was evaluated by the resulting breaking energy measured in Charpy impact tests conducted on an instrumented drop tower. The size and distribution of the CSR nanoparticles were characterized using Transmission Electron Microscopy (TEM) and Small Angle X-ray Scattering (SAXS). Scanning Electron Microscopy (SEM) was used to study the fracture surface morphology. The addition of the CSR nanoparticles increased the breaking energy with negligible change in elastic modulus and ultimate tensile stress (UTS). At ambient temperature the breaking energy increased with increasing additions of the CSR nanoparticles, while at LN2 temperatures, it reached a maximum at 5 wt% CSR concentration. KEY WORDS: liquid nitrogen (LN2) properties, fracture toughness, core-shell rubber (CSR).

  3. Effects of Core-Shell Rubber (CSR) Nanoparticles on the Cryogenic Fracture Toughness of CSR Modified Epoxy

    Science.gov (United States)

    Wang, Jun; Magee, Daniel; Schneider, Judy; Cannon, Seth

    2009-01-01

    This study investigated the effects of core-shell rubber (CSR) nanoparticles on the mechanical properties and fracture toughness of an epoxy resin at ambient and liquid nitrogen (LN2) temperatures. Varying amounts of Kane Ace(Registered TradeMark) MX130 and Kane Ace(Registered TradeMark) MX960 toughening agent were added to a commercially available EPON 862/Epikure W epoxy resin. Elastic modulus was calculated using quasi-static tensile data. Fracture toughness was evaluated by the resulting breaking energy measured in Charpy impact tests conducted on an instrumented drop tower. The size and distribution of the CSR nanoparticles were characterized using Transmission Electron Microscopy (TEM) and Small Angle X-ray Scattering (SAXS). Scanning Electron Microscopy (SEM) was used to study the fracture surface morphology. The addition of the CSR nanoparticles increased the breaking energy with negligible change in elastic modulus and ultimate tensile stress (UTS). At ambient temperature the breaking energy increased with increasing additions of the CSR nanoparticles up to 13.8wt%, while at LN2 temperatures, it reached a plateau at much lower CSR concentration.

  4. Effects of Core-Shell Rubber (CSR) Nanoparticles on the Fracture Toughness of an Epoxy Resin at Cryogenic Temperatures

    Science.gov (United States)

    Wang, J.; Cannon, S. A.; Schneider, J. A.

    2008-01-01

    This study investigates the effects of core-shell rubber (CSR) nanoparticles on the fracture toughness of an epoxy resin at liquid nitrogen (LN2) temperatures. Varying amounts of Kane Ace (Registered TradeMark) MX130 toughening agent were added to a commercially available EPON 862/W epoxy resin. Resulting fracture toughness was evaluated by the use of Charpy impact tests conducted on an instrumented drop tower. The size and distribution of the CSR nanoparticles were characterized using Transmission Electric Microscopy (TEM) and Small Angle X-ray Scattering (SAXS). Up to nominal 4.6% addition of the CSR nanoparticles, resulted in a nearly 5 times increase in the measured breaking energy. However, further increases in the amount of CSR nanoparticles had no appreciable affect on the breaking energy.

  5. Dynamic Mechanical Properties and Fracture Surface Morphologies of Core-Shell Rubber (CSR) Toughened Epoxy at Liquid Nitrogen (Ln2) Temperatures

    Science.gov (United States)

    Wang, J.; Magee, D.; Schneider, J. A.

    2009-01-01

    The dynamic mechanical properties and fracture surface morphologies were evaluated for a commercial epoxy resin toughened with two types of core-shell rubber (CSR) toughening agents (Kane Ace(Registered TradeMark) MX130 and MX960). The impact resistance (R) was evaluated by the resulting breaking energy measured in Charpy impact tests conducted on an instrumented drop tower. The resulting fracture surface morphologies were examined using Scanning Electron Microscopy (SEM). Fractographic observations of the CSR toughened epoxy tested at ambient temperature, showed a fracture as characterized by slender dendrite textures with large voids. The increasing number of dendrites and decreasing size of scale-like texture with more CSR particles corresponded with increased R. As the temperature decreased to Liquid Nitrogen (LN 2), the fracture surfaces showed a fracture characterized by a rough, torn texture containing many river markings and deep furrows.

  6. Investigation of the deformation mechanisms of core-shell rubber-modified epoxy at cryogenic temperatures

    Science.gov (United States)

    Brown, Hayley Rebecca

    The industrial demand for high strength-to-weight ratio materials is increasing due to the need for high performance components. Epoxy polymers, although often used in fiber-reinforced polymeric composites, have an inherent low toughness that further decreases with decreasing temperatures. Second-phase additives have been effective in increasing the toughness of epoxies at room temperature; however, the mechanisms at low temperatures are still not understood. In this study, the deformation mechanisms of a DGEBA epoxy modified with MX960 core-shell rubber (CSR) particles were investigated under quasi-static tensile and impact loads at room temperature (RT) and liquid nitrogen (LN 2) temperature. Overall, the CSR had little effect on the tensile properties at RT and LN2 temperature. The impact strength decreased from neat to 3 wt% but increased from neat to 5 wt% at RT and LN2 temperature, with a higher impact strength at RT at all CSR loadings. The CSR particles debonded in front of the crack tip, inducing voids into the matrix. It was found that an increase in shear deformation and void growth likely accounted for the higher impact strength at 5 wt% CSR loading at RT while the thermal stress fields due to the coefficient of thermal expansion mismatch between rubber and epoxy and an increase in secondary cracking is likely responsible for the higher impact strength at 5 wt% tested at LN2 temperature. While a large toughening effect was not seen in this study, the mechanisms analyzed herein will likely be of use for further material investigations at cryogenic temperatures.

  7. Reinforcement of Natural Rubber with Core-Shell Structure Silica-Poly(Methyl Methacrylate Nanoparticles

    Directory of Open Access Journals (Sweden)

    Qinghuang Wang

    2012-01-01

    Full Text Available A highly performing natural rubber/silica (NR/SiO2 nanocomposite with a SiO2 loading of 2 wt% was prepared by combining similar dissolve mutually theory with latex compounding techniques. Before polymerization, double bonds were introduced onto the surface of the SiO2 particles with the silane-coupling agent. The core-shell structure silica-poly(methyl methacrylate, SiO2-PMMA, nanoparticles were formed by grafting polymerization of MMA on the surface of the modified SiO2 particles via in situ emulsion, and then NR/SiO2 nanocomposite was prepared by blending SiO2-PMMA and PMMA-modified NR (NR-PMMA. The Fourier transform infrared spectroscopy results show that PMMA has been successfully introduced onto the surface of SiO2, which can be well dispersed in NR matrix and present good interfacial adhesion with NR phase. Compared with those of pure NR, the thermal resistance and tensile properties of NR/SiO2 nanocomposite are significantly improved.

  8. Thoughening of SAN with acryliv core-shell rubber particles: particle size effect or cross-link density

    NARCIS (Netherlands)

    Steenbrink, A.C.; Steenbrink, A.C.; Litvinov, V.M.; Gaymans, R.J.

    1998-01-01

    The effect of rubber particle size on fracture toughness and tensile properties have been investigated using styrene-acrylonitrile as a matrix. Pre-formed particles with poly(butyl-acrylate) core and a poly(methylmethacrylate) shell, ranging from 0.1 to 0.6 μm in diameter, were used as a toughening

  9. Engineered Magnetic Core-Shell Structures.

    Science.gov (United States)

    Alavi Nikje, Mir Mohammad; Vakili, Maryam

    2015-01-01

    In recent years, engineered magnetic core-shell structures are playing an important role in the wide range of various applications. These magnetic core-shell structures have attracted considerable attention because of their unique properties and various applications. Also, the synthesis of engineered magnetic core-shell structures has attracted practical interest because of potential applications in areas such as ferrofluids, medical imaging, drug targeting and delivery, cancer therapy, separations, and catalysis. So far a large number of engineered magnetic core-shell structures have been successfully synthesized. This review article focuses on the recent progress in synthesis and characterization of engineered magnetic core-shell structures. Also, this review gives a brief description of the various application of these structures. It is hoped that this review will play some small part in helping future developments in important field.

  10. Shape-tunable core-shell microparticles.

    Science.gov (United States)

    Klein, Matthias K; Saenger, Nicolai R; Schuetter, Stefan; Pfleiderer, Patrick; Zumbusch, Andreas

    2014-10-28

    Colloidal polymer particles are an important class of materials finding use in both everyday and basic research applications. Tailoring their composition, shape, and functionality is of key importance. In this article, we describe a new class of shape-tunable core-shell microparticles. They are composed of a cross-linked polystyrene (PS) core and a poly(methyl methacrylate) (PMMA) shell of varying thickness. In the first step, we prepared highly cross-linked PS cores, which are subsequently transferred into a nonpolar dispersant. They serve as the seed dispersion for a nonaqueous dispersion polymerization to generate the PMMA shell. The shape of the particles can subsequently be manipulated. After the shell growth stage, the spherical PS/PMMA core-shell colloids exhibit an uneven and wrinkled surface. An additional tempering procedure allows for smoothing the surface of the core-shell colloids. This results in polymer core-shell particles with a perfectly spherical shape. In addition to this thermal smoothing of the PMMA shell, we generated a selection of shape-anisotropic core-shell particles using a thermomechanical stretching procedure. Because of the unique constitution, we can selectively interrogate molecular vibrations in the PS core or the PMMA shell of the colloids using nonlinear optical microscopy techniques. This is of great interest because no photobleaching occurs, such that the particles can be tracked in real space over long times.

  11. Engineered inorganic core/shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Mélinon, Patrice, E-mail: patrice.melinon@univ-lyon1.fr [Institut Lumière matière Université Claude Bernard Lyon 1 et CNRS et OMNT, Domaine Scientifique de la Doua, Bâtiment Léon Brillouin, 43 Boulevard du 11 Novembre 1918, F 69622 Villeurbanne (France); Begin-Colin, Sylvie [IPCMS et OMNT, 23 rue du Loess BP 43, 67034 STRASBOURG Cedex 2 (France); Duvail, Jean Luc [IMN UMR 6502 et OMNT Campus Sciences : 2 rue de la Houssinire, BP32229, 44322 Nantes Cedex3 (France); Gauffre, Fabienne [SPM et OMNT : Institut des sciences chimiques de Rennes - UMR 6226, 263 Avenue du General Leclerc, CS 74205, 35042 RENNES Cedex (France); Boime, Nathalie Herlin [IRAMIS-NIMBE, Laboratoire Francis Perrin (CEA CNRS URA 2453) et OMNT, Bat 522, CEA Saclay, 91191 Gif sur Yvette Cedex (France); Ledoux, Gilles [Institut Lumière Matière Université Claude Bernard Lyon 1 et CNRS et OMNT, Domaine Scientifique de la Doua, Bâtiment Alfred Kastler 43 Boulevard du 11 Novembre 1918 F 69622 Villeurbanne (France); Plain, Jérôme [Universit de technologie de Troyes LNIO-ICD, CNRS et OMNT 12 rue Marie Curie - CS 42060 - 10004 Troyes cedex (France); Reiss, Peter [CEA Grenoble, INAC-SPrAM, UMR 5819 CEA-CNRS-UJF et OMNT, Grenoble cedex 9 (France); Silly, Fabien [CEA, IRAMIS, SPEC, TITANS, CNRS 2464 et OMNT, F-91191 Gif sur Yvette (France); Warot-Fonrose, Bénédicte [CEMES-CNRS, Université de Toulouse et OMNT, 29 rue Jeanne Marvig F 31055 Toulouse (France)

    2014-10-20

    It has been for a long time recognized that nanoparticles are of great scientific interest as they are effectively a bridge between bulk materials and atomic structures. At first, size effects occurring in single elements have been studied. More recently, progress in chemical and physical synthesis routes permitted the preparation of more complex structures. Such structures take advantages of new adjustable parameters including stoichiometry, chemical ordering, shape and segregation opening new fields with tailored materials for biology, mechanics, optics magnetism, chemistry catalysis, solar cells and microelectronics. Among them, core/shell structures are a particular class of nanoparticles made with an inorganic core and one or several inorganic shell layer(s). In earlier work, the shell was merely used as a protective coating for the core. More recently, it has been shown that it is possible to tune the physical properties in a larger range than that of each material taken separately. The goal of the present review is to discuss the basic properties of the different types of core/shell nanoparticles including a large variety of heterostructures. We restrict ourselves on all inorganic (on inorganic/inorganic) core/shell structures. In the light of recent developments, the applications of inorganic core/shell particles are found in many fields including biology, chemistry, physics and engineering. In addition to a representative overview of the properties, general concepts based on solid state physics are considered for material selection and for identifying criteria linking the core/shell structure and its resulting properties. Chemical and physical routes for the synthesis and specific methods for the study of core/shell nanoparticle are briefly discussed.

  12. Magnetic core-shell silica particles

    NARCIS (Netherlands)

    Claesson, E.M.

    2007-01-01

    This thesis deals with magnetic silica core-shell colloids and related functionalized silica structures. Synthesis routes have been developed and optimized. The physical properties of these colloids have been investigated, such as the magnetic dipole moment, dipolar structure formation and

  13. Magnetic core-shell silica particles

    NARCIS (Netherlands)

    Claesson, E.M.

    2007-01-01

    This thesis deals with magnetic silica core-shell colloids and related functionalized silica structures. Synthesis routes have been developed and optimized. The physical properties of these colloids have been investigated, such as the magnetic dipole moment, dipolar structure formation and rotationa

  14. Retention Models on Core-Shell Columns.

    Science.gov (United States)

    Jandera, Pavel; Hájek, Tomáš; Růžičková, Marie

    2017-07-13

    A thin, active shell layer on core-shell columns provides high efficiency in HPLC at moderately high pressures. We revisited three models of mobile phase effects on retention for core-shell columns in mixed aqueous-organic mobile phases: linear solvent strength and Snyder-Soczewiński two-parameter models and a three-parameter model. For some compounds, two-parameter models show minor deviations from linearity due to neglect of possible minor retention in pure weak solvent, which is compensated for in the three-parameter model, which does not explicitly assume either the adsorption or the partition retention mechanism in normal- or reversed-phase systems. The model retention equation can be formulated as a function of solute retention factors of nonionic compounds in pure organic solvent and in pure water (or aqueous buffer) and of the volume fraction of an either aqueous or organic solvent component in a two-component mobile phase. With core-shell columns, the impervious solid core does not participate in the retention process. Hence, the thermodynamic retention factors, defined as the ratio of the mass of the analyte mass contained in the stationary phase to its mass in the mobile phase in the column, should not include the particle core volume. The values of the thermodynamic factors are lower than the retention factors determined using a convention including the inert core in the stationary phase. However, both conventions produce correct results if consistently used to predict the effects of changing mobile phase composition on retention. We compared three types of core-shell columns with C18-, phenyl-hexyl-, and biphenyl-bonded phases. The core-shell columns with phenyl-hexyl- and biphenyl-bonded ligands provided lower errors in two-parameter model predictions for alkylbenzenes, phenolic acids, and flavonoid compounds in comparison with C18-bonded ligands.

  15. Black GE based on crystalline/amorphous core/shell nanoneedle arrays

    Science.gov (United States)

    Javey, Ali; Chueh, Yu-Lun; Fan, Zhiyong

    2014-03-04

    Direct growth of black Ge on low-temperature substrates, including plastics and rubber is reported. The material is based on highly dense, crystalline/amorphous core/shell Ge nanoneedle arrays with ultrasharp tips (.about.4 nm) enabled by the Ni catalyzed vapor-solid-solid growth process. Ge nanoneedle arrays exhibit remarkable optical properties. Specifically, minimal optical reflectance (black Ge can have important practical implications for efficient photovoltaic and photodetector applications on nonconventional substrates.

  16. Preparation and property of graphene oxide core-shell hybrid particles/silicone rubber dielectric elastomer composites%氧化石墨烯核-壳杂化粒子/硅橡胶介电弹性体复合材料的制备与性能

    Institute of Scientific and Technical Information of China (English)

    王明路; 宁南英; 张静; 张立群; 田明

    2016-01-01

    采用阳离子聚电解质聚二烯丙基二甲基氯化铵(PDDA)改性 SiO2,再通过静电自组装制备了 SiO2-PD-DA-氧化石墨烯(GO)核-壳杂化粒子。采用溶液共混法将 SiO2-PDDA-GO引入到高温硫化硅橡胶(SR)中,制备了SiO2-PDDA-GO/SR介电弹性体复合材料。结果表明:该方法能实现 GO 在 SiO2表面大面积的包覆,解决了 GO容易自聚集的问题,且PDDA具有还原 GO的作用,无需再对 GO核-壳杂化粒子/SR复合材料进行原位热还原,简化了实验方案,节能环保。SiO2-PDDA-GO填充量为60wt%时,在100 Hz 频率下,SiO2-PDDA-GO/SR 介电弹性体复合材料的介电常数为21.53,是 SR的11.6倍,介电损耗保持较低值,同时,复合材料的模量保持在较低水平。在电场强度为2.48 kV/mm时,60wt%的SiO2-PDDA-GO/SR介电弹性体复合材料横向电致形变在同一电场强度下与 SR相比增加了15倍。%Cationic polyelectrolyte poly(diallyldimethylammonium chloride)(PDDA)was used to modify SiO2 ,and SiO2-PDDA-graphite oxide (GO)core-shell hybrid particles were prepared by electrostatic self-assembly.By intro-ducing SiO2-PDDA-GO into high-temperature vulcanization silicone rubber (SR)with solution blending method, SiO2-PDDA-GO/SR dielectric elastomer composites were prepared.Results show that this method can realize GO large surface coating on surface of SiO2 to prevent GO from self-agglomerating.GO core-shell hybrid particles/SR composites were obtained without in-situ thermal reduction because PDDA can reduce GO,made experimental scheme simple and environmental protection.The dielectric constant of SiO2-PDDA-GO/SR dielectric composite at 100 Hz increases to 21.53 with 60wt% SiO2-PDDA-GO which is 11.6 times than SR,and dielectric loss remains at low level.Meanwhile,modulus of composites remains low level.The lateral actuation strain of SiO2-PDDA-GO/SR dielectric elastomer composites with 60wt% SiO2-PDDA-GO at 2.48 kV/mm compared with pure SR increases 15 fold under same

  17. Core-shell silicon nanowire solar cells.

    Science.gov (United States)

    Adachi, M M; Anantram, M P; Karim, K S

    2013-01-01

    Silicon nanowires can enhance broadband optical absorption and reduce radial carrier collection distances in solar cell devices. Arrays of disordered nanowires grown by vapor-liquid-solid method are attractive because they can be grown on low-cost substrates such as glass, and are large area compatible. Here, we experimentally demonstrate that an array of disordered silicon nanowires surrounded by a thin transparent conductive oxide has both low diffuse and specular reflection with total values as low as nanowire facilitates enhancement in external quantum efficiency using two different active shell materials: amorphous silicon and nanocrystalline silicon. As a result, the core-shell nanowire device exhibits a short-circuit current enhancement of 15% with an amorphous Si shell and 26% with a nanocrystalline Si shell compared to their corresponding planar devices.

  18. Dispersion behavior of core-shell silica-polymer nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Core-shell silica nanoparticles are superior in modifying surface wetting behavior, enhancing nucleation and growth in crystallization, improving dispersion of naked nanoparticles, and thus upgrading the overall properties of organic polymers. The dispersion behavior and morphology of monodisperse core-shell silica particles in several polymers including polyesters are reviewed and their potential applications are discussed.

  19. Nanostructured core-shell electrode materials for electrochemical capacitors

    Science.gov (United States)

    Jiang, Long-bo; Yuan, Xing-zhong; Liang, Jie; Zhang, Jin; Wang, Hou; Zeng, Guang-ming

    2016-11-01

    Core-shell nanostructure represents a unique system for applications in electrochemical energy storage devices. Owing to the unique characteristics featuring high power delivery and long-term cycling stability, electrochemical capacitors (ECs) have emerged as one of the most attractive electrochemical storage systems since they can complement or even replace batteries in the energy storage field, especially when high power delivery or uptake is needed. This review aims to summarize recent progress on core-shell nanostructures for advanced supercapacitor applications in view of their hierarchical architecture which not only create the desired hierarchical porous channels, but also possess higher electrical conductivity and better structural mechanical stability. The core-shell nanostructures include carbon/carbon, carbon/metal oxide, carbon/conducting polymer, metal oxide/metal oxide, metal oxide/conducting polymer, conducting polymer/conducting polymer, and even more complex ternary core-shell nanoparticles. The preparation strategies, electrochemical performances, and structural stabilities of core-shell materials for ECs are summarized. The relationship between core-shell nanostructure and electrochemical performance is discussed in detail. In addition, the challenges and new trends in core-shell nanomaterials development have also been proposed.

  20. Core-Shell Nanoparticle-Enhanced Raman Spectroscopy.

    Science.gov (United States)

    Li, Jian-Feng; Zhang, Yue-Jiao; Ding, Song-Yuan; Panneerselvam, Rajapandiyan; Tian, Zhong-Qun

    2017-03-08

    Core-shell nanoparticles are at the leading edge of the hot research topics and offer a wide range of applications in optics, biomedicine, environmental science, materials, catalysis, energy, and so forth, due to their excellent properties such as versatility, tunability, and stability. They have attracted enormous interest attributed to their dramatically tunable physicochemical features. Plasmonic core-shell nanomaterials are extensively used in surface-enhanced vibrational spectroscopies, in particular, surface-enhanced Raman spectroscopy (SERS), due to the unique localized surface plasmon resonance (LSPR) property. This review provides a comprehensive overview of core-shell nanoparticles in the context of fundamental and application aspects of SERS and discusses numerous classes of core-shell nanoparticles with their unique strategies and functions. Further, herein we also introduce the concept of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) in detail because it overcomes the long-standing limitations of material and morphology generality encountered in traditional SERS. We then explain the SERS-enhancement mechanism with core-shell nanoparticles, as well as three generations of SERS hotspots for surface analysis of materials. To provide a clear view for readers, we summarize various approaches for the synthesis of core-shell nanoparticles and their applications in SERS, such as electrochemistry, bioanalysis, food safety, environmental safety, cultural heritage, materials, catalysis, and energy storage and conversion. Finally, we exemplify about the future developments in new core-shell nanomaterials with different functionalities for SERS and other surface-enhanced spectroscopies.

  1. CSR communication

    DEFF Research Database (Denmark)

    Golob, Ursa; Podnar, Klement; Elving, Wim

    2013-01-01

    Purpose – This paper aims to introduce the special issue on CSR communication attached to the First International CSR Communication Conference held in Amsterdam in October 2011. The aim of the introduction is also to review CSR communication papers published in scholarly journals in order to make...... a summary of the state of CSR communication knowledge. Design/methodology/approach – The existing literature on CSR communication was approached via systematic review. with a combination of conventional and summative qualitative content analysis. The final dataset contained 90 papers from two main business...... communications. The most important outlets for CSR communication-related topics are Journal of Business Ethics and Corporate Communications: An International Journal. Originality/value – This paper represents the first attempt to perform a systematic and comprehensive overview of CSR communication papers...

  2. Synthesis of core-shell iron nanoparticles from decomposition of Fe-Sn nanocomposite and studies on their microwave absorption properties

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Vatsana; Patra, Manoj K.; Shukla, Anuj; Saini, Lokesh; Songara, Sandhya; Jani, Rajkumar; Vadera, Sampat R.; Kumar, Narendra, E-mail: nkjainjd@yahoo.com [Defence Laboratory (India)

    2012-12-15

    Core-shell iron nanoparticles have been synthesized by pyrolysis of nanocomposite of oxides of iron-tin (Fe-Sn). The core-shell nanoparticles of phase pure iron in carbonaceous shell are formed only at very low concentration of tin (0.0011 mol) in the nanocomposite sample. From different studies viz. X-ray diffraction, high-resolution transmission electron microscopy, atomic force microscopy, and Raman spectroscopy, it has been established that core-shell nanostructures have been formed with Fe as core and amorphous carbon as the shell. The heating of nanocomposite at different temperatures up to 900 Degree-Sign C revealed very interesting dynamics of formation of core-shell structure wherein above 650 Degree-Sign C the iron carbide phase decomposes and carbon atoms move out to form an amorphous shell around iron nanoparticles. This process of formation of core-shell structures is quite different from conventional way wherein synthesis of core material precedes formation of shell in two different steps. The microwave absorption properties of core-shell nanoparticles have been studied by making their composites in nitrile butadiene rubber. Reflection loss simulation studies show high values in the X and Ku bands of microwave region. The frequency of maximum return loss can be tuned through variation of composition and thickness of composite layer.

  3. Graded core/shell semiconductor nanorods and nanorod barcodes

    Science.gov (United States)

    Alivisatos, A. Paul; Scher, Erik C.; Manna, Liberato

    2010-12-14

    Graded core/shell semiconductor nanorods and shaped nanorods are disclosed comprising Group II-VI, Group III-V and Group IV semiconductors and methods of making the same. Also disclosed are nanorod barcodes using core/shell nanorods where the core is a semiconductor or metal material, and with or without a shell. Methods of labeling analytes using the nanorod barcodes are also disclosed.

  4. Core-shell magnetic nanowires fabrication and characterization

    Science.gov (United States)

    Kalska-Szostko, B.; Klekotka, U.; Satuła, D.

    2017-02-01

    In this paper, a new way of the preparation of core-shell magnetic nanowires has been proposed. For the modification Fe nanowires were prepared by electrodeposition in anodic aluminium oxide matrixes, in first step. In second, by wetting chemical deposition, shell layers of Ag, Au or Cu were obtained. Resultant core-shell nanowires structure was characterized by X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and energy dispersive x-ray. Whereas magnetic properties by Mössbauer spectroscopy.

  5. Simulated evolution process of core-shell microstructures

    Institute of Scientific and Technical Information of China (English)

    QIN Tao; WANG HaiPeng; WEI BingBo

    2007-01-01

    The evolution process of core-shell microstructures formed in monotectic alloys under the space environment condition was investigated by the numerical simulation method. In order to account for the effect of surface segregation on phase separation, Model H was modified by introducing a surface free energy term into the total free energy of alloy droplet. Three Fe-Cu alloys were taken as simulated examples, which usually exhibit metastable phase separation in undercooled and microgravity states. It was revealed by the dynamic simulation process that the formation of core-shell microstructures depends mainly on surface segregation and Marangoni convection. The phase separation of Fe65Cu35 alloy starts from a dispersed structure and gradually evolves into a triple-layer core-shell microstructure. Similarly, Fe50Cu50 alloy experiences a structural evolution process of "bicontinuous phase → quadruple-layer core-shell → triple-layer core-shell", while the microstructures of Fe35Cu65 alloy transfer from the dispersed structure into the final double-layer core-shell morphology. The Cu-rich phase always forms the outer layer because of surface segregation, whereas the internal microstructural evolution is controlled mainly by the Marangoni convection resulting from the temperature gradient.

  6. Simulated evolution process of core-shell microstructures

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The evolution process of core-shell microstructures formed in monotectic alloys under the space environment condition was investigated by the numerical simula- tion method. In order to account for the effect of surface segregation on phase separation, Model H was modified by introducing a surface free energy term into the total free energy of alloy droplet. Three Fe-Cu alloys were taken as simulated examples, which usually exhibit metastable phase separation in undercooled and microgravity states. It was revealed by the dynamic simulation process that the formation of core-shell microstructures depends mainly on surface segregation and Marangoni convection. The phase separation of Fe65Cu35 alloy starts from a dispersed structure and gradually evolves into a triple-layer core-shell micro- structure. Similarly, Fe50Cu50 alloy experiences a structural evolution process of "bicontinuous phase → quadruple-layer core-shell → triple-layer core-shell", while the microstructures of Fe35Cu65 alloy transfer from the dispersed structure into the final double-layer core-shell morphology. The Cu-rich phase always forms the outer layer because of surface segregation, whereas the internal microstructural evolu- tion is controlled mainly by the Marangoni convection resulting from the tempera- ture gradient.

  7. Political CSR

    DEFF Research Database (Denmark)

    Jeppesen, Søren; Morsing, Mette

    We engage a discussion of political CSR in SMEs in an African context. Based on critical observations on Western MNC CSR action in emerging economies that holds counterproductive implications for social development, political economists have argued that business profit far more than society...... their European counterparts with their strong focus on retention of employees and support of extended households. We discuss how the African SME propensity to prioritize employees and extended households in CSR work in a paternalistic manner has productive as well as counterproductive implications for social...

  8. Electron energy spectrum in core-shell elliptic quantum wire

    Directory of Open Access Journals (Sweden)

    V.Holovatsky

    2007-01-01

    Full Text Available The electron energy spectrum in core-shell elliptic quantum wire and elliptic semiconductor nanotubes are investigated within the effective mass approximation. The solution of Schrodinger equation based on the Mathieu functions is obtained in elliptic coordinates. The dependencies of the electron size quantization spectrum on the size and shape of the core-shell nanowire and nanotube are calculated. It is shown that the ellipticity of a quantum wire leads to break of degeneration of quasiparticle energy spectrum. The dependences of the energy of odd and even electron states on the ratio between semiaxes are of a nonmonotonous character. The anticrosing effects are observed at the dependencies of electron energy spectrum on the transversal size of the core-shell nanowire.

  9. Electrospinning of ultrafine core/shell fibers for biomedical applications

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Because of the inherent appearance similar to the natural extracellular matrix,ultrafine fibrous membranes prepared via electrospinning exhibit widespread applications,especially in the biomedical area.Extensional modifications of coaxial and emulsion electrospinning have drawn much attention in preparation of core/shell fibers for applications as tissue engineering scaffolds and controlled delivery systems for bioactive substances.Due to incorporation of multi-components in the electrospun core/ shell fibers,the process of coaxial and emulsion electrospinning became more susceptible.The theories have not been fully understood.A series of investigations were carried out evaluating the systematic and processing parameters.This paper reviews advantages and potentials of electrospun core/shell fibers as well as factors influencing their formation on the basis of our research and new progress.

  10. Core-Shell and Segmented Polymer-Metal Composite Nanostructures

    Science.gov (United States)

    Lahav, Michal; Weiss, Emily; Xu, Qiaobing; Whitesides, George M.

    2008-01-01

    Composite nanostructures (~200 nm wide and several μm long) of metal and polyaniline (PANI) in two new variations of core-shell (PANI-Au) and segmented (Au-PANI and Ni-Au-PANI) architectures were fabricated electrochemically within anodized aluminum oxide (AAO) membranes. Control over the structure of these composites (including the length of the gold shells in the core-shell structures) was accomplished by adjusting the time and rate of electrodeposition, and the pH of the solution from which the materials were grown. Exposure of the core-shell structures to oxygen plasma removed the PANI and yielded aligned gold nanotubes. In the segmented structures, a self-assembled monolayer (SAM) of thioaniline nucleated the growth of PANI on top of metal nanorods, and acted as an adhesion layer between the metal and PANI components. PMID:16968046

  11. Electrochemical synthesis of CORE-shell magnetic nanowires

    KAUST Repository

    Ovejero, Jesús G.

    2015-04-16

    (Fe, Ni, CoFe) @ Au core-shell magnetic nanowires have been synthesized by optimized two-step potentiostatic electrodeposition inside self-assembled nanopores of anodic aluminium templates. The optimal electrochemical parameters (e.g., potential) have been firstly determined for the growth of continuous Au nanotubes at the inner wall of pores. Then, a magnetic core was synthesized inside the Au shells under suitable electrochemical conditions for a wide spectrum of single elements and alloy compositions (e.g., Fe, Ni and CoFe alloys). Novel opportunities offered by such nanowires are discussed particularly the magnetic behavior of (Fe, Ni, CoFe) @ Au core-shell nanowires was tested and compared with that of bare TM nanowires. These core-shell nanowires can be released from the template so, opening novel opportunities for biofunctionalization of individual nanowires.

  12. Core-Shell Composite Nanoparticles: Synthesis, Characterization, and Applications

    Science.gov (United States)

    Sanyal, Sriya

    Nanoparticles are ubiquitous in various fields due to their unique properties not seen in similar bulk materials. Among them, core-shell composite nanoparticles are an important class of materials which are attractive for their applications in catalysis, sensing, electromagnetic shielding, drug delivery, and environmental remediation. This dissertation focuses on the study of core-shell type of nanoparticles where a polymer serves as the core and inorganic nanoparticles are the shell. This is an interesting class of supramolecular building blocks and can "exhibit unusual, possibly unique, properties which cannot be obtained simply by co-mixing polymer and inorganic particles". The one-step Pickering emulsion polymerization method was successfully developed and applied to synthesize polystyrene-silica core-shell composite particles. Possible mechanisms of the Pickering emulsion polymerization were also explored. The silica nanoparticles were thermodynamically favorable to self-assemble at liquid-liquid interfaces at the initial stage of polymerization and remained at the interface to finally form the shells of the composite particles. More importantly, Pickering emulsion polymerization was employed to synthesize polystyrene/poly(N-isopropylacrylamide) (PNIPAAm)-silica core-shell nanoparticles with N-isopropylacrylamide incorporated into the core as a co-monomer. The composite nanoparticles were temperature sensitive and could be up-taken by human prostate cancer cells and demonstrated effectiveness in drug delivery and cancer therapy. Similarly, by incorporating poly-2-(N,N)-dimethylamino)ethyl methacrylate (PDMA) into the core, pH sensitive core-shell composite nanoparticles were synthesized and applied as effective carriers to release a rheological modifier upon a pH change. Finally, the research focuses on facile approaches to engineer the transition of the temperature-sensitive particles and develop composite core-shell nanoparticles with a metallic shell.

  13. Tailored Core Shell Cathode Powders for Solid Oxide Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Swartz, Scott [NexTech Materials, Ltd.,Lewis Center, OH (United States)

    2015-03-23

    In this Phase I SBIR project, a “core-shell” composite cathode approach was evaluated for improving SOFC performance and reducing degradation of lanthanum strontium cobalt ferrite (LSCF) cathode materials, following previous successful demonstrations of infiltration approaches for achieving the same goals. The intent was to establish core-shell cathode powders that enabled high performance to be obtained with “drop-in” process capability for SOFC manufacturing (i.e., rather than adding an infiltration step to the SOFC manufacturing process). Milling, precipitation and hetero-coagulation methods were evaluated for making core-shell composite cathode powders comprised of coarse LSCF “core” particles and nanoscale “shell” particles of lanthanum strontium manganite (LSM) or praseodymium strontium manganite (PSM). Precipitation and hetero-coagulation methods were successful for obtaining the targeted core-shell morphology, although perfect coverage of the LSCF core particles by the LSM and PSM particles was not obtained. Electrochemical characterization of core-shell cathode powders and conventional (baseline) cathode powders was performed via electrochemical impedance spectroscopy (EIS) half-cell measurements and single-cell SOFC testing. Reliable EIS testing methods were established, which enabled comparative area-specific resistance measurements to be obtained. A single-cell SOFC testing approach also was established that enabled cathode resistance to be separated from overall cell resistance, and for cathode degradation to be separated from overall cell degradation. The results of these EIS and SOFC tests conclusively determined that the core-shell cathode powders resulted in significant lowering of performance, compared to the baseline cathodes. Based on the results of this project, it was concluded that the core-shell cathode approach did not warrant further investigation.

  14. Fabrication of Magnetite/Silica/Titania Core-Shell Nanoparticles

    Directory of Open Access Journals (Sweden)

    Suh Cem Pang

    2012-01-01

    Full Text Available Fe3O4/SiO2/TiO2 core-shell nanoparticles were synthesized via a sol-gel method with the aid of sonication. Fe3O4 nanoparticles were being encapsulated within discrete silica nanospheres, and a layer of TiO2 shell was then coated directly onto each silica nanosphere. As-synthesized Fe3O4/SiO2/TiO2 core-shell nanoparticles showed enhanced photocatalytic properties as evidenced by the enhanced photodegradation of methylene blue under UV light irradiation.

  15. Synthesis of AlNiCo core/shell nanopowders

    Science.gov (United States)

    Genc, A. M.; Akdeniz, M. V.; Ozturk, T.; Kalay, Y. E.

    2016-11-01

    Magnetic core/shell nanostructures have been recently received much interest owing to their utmost potential in permanent magnetic applications. In the present work, AlNiCo permanent magnet powders were synthesized by ball milling and a core/shell nanostructure was obtained using RF induced plasma. The effects of particle size and nanoshell structure on the magnetic properties were investigated in details. The coercivity of AlNiCo powders was found to increase with decreasing particle size, exclusively nanopowders encapsulated with Fe3O4 shell showed the highest coercivity values. The shell structure produced during plasma reaction was found to form a resistant layer against oxidation of metallic nanoparticles.

  16. Study of a core-shell type impact modifier by inverse gas chromatography.

    Science.gov (United States)

    Santos, J M R C A; Guthrie, J T

    2005-04-08

    Inverse gas chromatography (IGC) has been used to study the Lewis acid-base properties of a technologically and commercially important core-shell type elastomer (MBS rubber). The parameters determined were the dispersive component of the surface tension, the surface free energy, the enthalpy and the entropy of adsorption of polar and apolar probes, the surface Lewis acidity constant (Ka), and the surface Lewis basicity constant (Kb). The results show that the MBS rubber is amphoteric but strongly Lewis basic. It is weakly Lewis acidic. The results are in accord with the analysis of the molecular structure of PMMA, the shell component of this impact modifier (IM). The interactivity of this elastomer with the remaining materials in multicomponent polymeric systems is expected to be strongly influenced by the particular surface energetic properties of the MBS rubber. The results presented would contribute to the interpretation, forecast and optimization of the adhesion properties and phase preferences shown by this impact modifier when incorporated in such complex polymeric systems as polymer blends and composites.

  17. Multifunctional magnetic and fluorescent core-shell nanoparticles for bioimaging.

    Science.gov (United States)

    Lu, Yanjiao; He, Bicheng; Shen, Jie; Li, Jie; Yang, Wantai; Yin, Meizhen

    2015-02-07

    Novel magnetic and fluorescent core-shell nanoparticles have been fabricated, which exhibit superparamagnetic behavior and emit strong near-infrared fluorescence. The nanoparticles are highly biocompatible and can be internalized into cells with nucleic accumulation via strong interaction with nucleic acids, implying potential applications in the biomedical field.

  18. Core-shell iron-iron oxide nanoparticles

    DEFF Research Database (Denmark)

    Kuhn, Luise Theil; Bojesen, A.; Timmermann, L.

    2004-01-01

    We present studies of the magnetic properties of core-shell iron-iron oxide nanoparticles. By combining Mossbauer and X-ray absorption spectroscopy we have been able to measure the change from a Fe3O4-like to a gamma-Fe2O3-like composition from the interface to the surface. Furthermore, we have...

  19. Biocompatible magnetic core-shell nanocomposites for engineered magnetic tissues

    Science.gov (United States)

    Rodriguez-Arco, Laura; Rodriguez, Ismael A.; Carriel, Victor; Bonhome-Espinosa, Ana B.; Campos, Fernando; Kuzhir, Pavel; Duran, Juan D. G.; Lopez-Lopez, Modesto T.

    2016-04-01

    The inclusion of magnetic nanoparticles into biopolymer matrixes enables the preparation of magnetic field-responsive engineered tissues. Here we describe a synthetic route to prepare biocompatible core-shell nanostructures consisting of a polymeric core and a magnetic shell, which are used for this purpose. We show that using a core-shell architecture is doubly advantageous. First, gravitational settling for core-shell nanocomposites is slower because of the reduction of the composite average density connected to the light polymer core. Second, the magnetic response of core-shell nanocomposites can be tuned by changing the thickness of the magnetic layer. The incorporation of the composites into biopolymer hydrogels containing cells results in magnetic field-responsive engineered tissues whose mechanical properties can be controlled by external magnetic forces. Indeed, we obtain a significant increase of the viscoelastic moduli of the engineered tissues when exposed to an external magnetic field. Because the composites are functionalized with polyethylene glycol, the prepared bio-artificial tissue-like constructs also display excellent ex vivo cell viability and proliferation. When implanted in vivo, the engineered tissues show good biocompatibility and outstanding interaction with the host tissue. Actually, they only cause a localized transitory inflammatory reaction at the implantation site, without any effect on other organs. Altogether, our results suggest that the inclusion of magnetic core-shell nanocomposites into biomaterials would enable tissue engineering of artificial substitutes whose mechanical properties could be tuned to match those of the potential target tissue. In a wider perspective, the good biocompatibility and magnetic behavior of the composites could be beneficial for many other applications.The inclusion of magnetic nanoparticles into biopolymer matrixes enables the preparation of magnetic field-responsive engineered tissues. Here we

  20. CSR - Challenging Questions

    OpenAIRE

    Watson, Tom

    2014-01-01

    The presentation analyses current understandings of CSR and their visual representation; give examples of 'good' and 'bad' CSR/social marketing; considers the critical attack on CSR before presenting a checklist for communicators to use when developing CSR communication strategies.

  1. Nanocomposite plasmonic fluorescence emitters with core/shell configurations

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Xiaoyu; Brener, Igal; Luk, Ting Shan

    2010-07-16

    This paper is focused on the optical properties of nanocomposite plasmonic emitters with core/shell configurations, where a fluorescence emitter is located inside a metal nanoshell. Systematic theoretical investigations are presented for the influence of material type, core radius, shell thickness, and excitation wavelength on the internal optical intensity, radiative quantum yield, and fluorescence enhancement of the nanocomposite emitter. It is our conclusion that: (i) an optimal ratio between the core radius and shell thickness is required to maximize the absorption rate of fluorescence emitters, and (ii) a large core radius is desired to minimize the non-radiative damping and avoid significant quantum yield degradation of light emitters. Several experimental approaches to synthesize these nanocomposite emitters are also discussed. Furthermore, our theoretical results are successfully used to explain several reported experimental observations and should prove useful for designing ultra-bright core/shell nanocomposite emitters.

  2. Nanocomposite plasmonic fluorescence emitters with core/shell configurations.

    Energy Technology Data Exchange (ETDEWEB)

    Brener, Igal; Luk, Ting Shan; Miao, Xiaoyu

    2010-06-01

    This paper is focused on the optical properties of nanocomposite plasmonic emitters with core/shell configurations, where a fluorescence emitter is located inside a metal nanoshell. Systematic theoretical investigations are presented for the influence of material type, core radius, shell thickness, and excitation wavelength on the internal optical intensity, radiative quantum yield, and fluorescence enhancement of the nanocomposite emitter. It is our conclusion that: (i) an optimal ratio between the core radius and shell thickness is required to maximize the absorption rate of fluorescence emitters, and (ii) a large core radius is desired to minimize the non-radiative damping and avoid significant quantum yield degradation of light emitters. Several experimental approaches to synthesize these nanocomposite emitters are also discussed. Furthermore, our theoretical results are successfully used to explain several reported experimental observations and should prove useful for designing ultra-bright core/shell nanocomposite emitters.

  3. Process to make core-shell structured nanoparticles

    Science.gov (United States)

    Luhrs, Claudia; Phillips, Jonathan; Richard, Monique N

    2014-01-07

    Disclosed is a process for making a composite material that contains core-shell structured nanoparticles. The process includes providing a precursor in the form of a powder a liquid and/or a vapor of a liquid that contains a core material and a shell material, and suspending the precursor in an aerosol gas to produce an aerosol containing the precursor. In addition, the process includes providing a plasma that has a hot zone and passing the aerosol through the hot zone of the plasma. As the aerosol passes through the hot zone of the plasma, at least part of the core material and at least part of the shell material in the aerosol is vaporized. Vapor that contains the core material and the shell material that has been vaporized is removed from the hot zone of the plasma and allowed to condense into core-shell structured nanoparticles.

  4. Rare Earth core/shell nanobarcodes for multiplexed trace biodetection.

    Science.gov (United States)

    Chen, Lei; Li, Xiaomin; Shen, Dengke; Zhou, Lei; Zhu, Dan; Fan, Chunhai; Zhang, Fan

    2015-06-02

    Multiplexed detection technology has been attractive for its simultaneous assay of several analytes, which play significant roles in applications such as screening for combinatorial chemistry, genetic analysis, and clinical diagnostics. This work reports a novel and potentially powerful encoding system based upon dispersible suspension arrays of multilayer rare earth core/shell nanoparticles that are capable of multiplexed, high-sensitivity reporting for biomolecule detection by the Z-contrast imaging. These nanobarcode arrays are encoded by nanostructure design based on different atomic numbers. With the well-resolved high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) decoding technique, many thousands of unique nanobarcodes can be identified by multilayer core/shell nanostructure. Their applications to multiplexed biodetection of DNA demonstrated the highly sensitive (picomole) features of this novel nanobarcode system.

  5. Synthesis of core-shell composites using an inverse surfmer.

    Science.gov (United States)

    Armando Zaragoza-Contreras, E; Stockton-Leal, Margarita; Hernández-Escobar, Claudia A; Hoshina, Yusuke; Guzmán-Lozano, Josué F; Kobayashi, Takaomi

    2012-07-01

    Anilinium dodecylsulfate was prepared from aniline and sodium dodecylsulfate. The critical micellar concentration of the salt was determined using electrical conductimetry, which revealed that the change of countercation, sodium by anilinium, reduced the critical micellar concentration with respect to the conventional counterpart, sodium dodecylsulfate. The anilinium dodecylsulfate was used as the surfmer in the synthesis of polystyrene/polyaniline core-shell composites, first performing as the surfactant to stabilize the emulsion polymerization of styrene, and later as the monomer to synthesize polyaniline via oxidative polymerization. Here, the surfmer function was directed toward the external phase instead of to the internal phase, as with conventional surfmers with carbon-carbon double bonds. Consequently, the term inverse surfmer is proposed. Analyses of its composite microstructure using electron microscopy and thermogravimetric analysis confirmed the core-shell arrangement.

  6. Synthesis of AlNiCo core/shell nanopowders

    Energy Technology Data Exchange (ETDEWEB)

    Genc, A.M.; Akdeniz, M.V.; Ozturk, T.; Kalay, Y.E., E-mail: ekalay@metu.edu.tr

    2016-11-01

    Magnetic core/shell nanostructures have been recently received much interest owing to their utmost potential in permanent magnetic applications. In the present work, AlNiCo permanent magnet powders were synthesized by ball milling and a core/shell nanostructure was obtained using RF induced plasma. The effects of particle size and nanoshell structure on the magnetic properties were investigated in details. The coercivity of AlNiCo powders was found to increase with decreasing particle size, exclusively nanopowders encapsulated with Fe{sub 3}O{sub 4} shell showed the highest coercivity values. The shell structure produced during plasma reaction was found to form a resistant layer against oxidation of metallic nanoparticles. - Highlights: • FeCo–NiAl (core) and Fe{sub 3}O{sub 4} (shell) nanostructures were synthesized. • Coercivity was increased to 250 Oe. • The oxide coating acts as a protection layer.

  7. Tuning upconversion through energy migration in core-shell nanoparticles

    KAUST Repository

    Wang, Feng

    2011-10-23

    Photon upconversion is promising for applications such as biological imaging, data storage or solar cells. Here, we have investigated upconversion processes in a broad range of gadolinium-based nanoparticles of varying composition. We show that by rational design of a core-shell structure with a set of lanthanide ions incorporated into separated layers at precisely defined concentrations, efficient upconversion emission can be realized through gadolinium sublattice-mediated energy migration for a wide range of lanthanide activators without long-lived intermediary energy states. Furthermore, the use of the core-shell structure allows the elimination of deleterious cross-relaxation. This effect enables fine-tuning of upconversion emission through trapping of the migrating energy by the activators. Indeed, the findings described here suggest a general approach to constructing a new class of luminescent materials with tunable upconversion emissions by controlled manipulation of energy transfer within a nanoscopic region. © 2011 Macmillan Publishers Limited. All rights reserved.

  8. Graded core/shell semiconductor nanorods and nanorod barcodes

    Science.gov (United States)

    Alivisatos, A. Paul; Scher, Erik C.; Manna, Liberato

    2009-05-19

    Disclosed herein is a graded core/shell semiconductor nanorod having at least a first segment of a core of a Group II-VI, Group III-V or a Group IV semiconductor, a graded shell overlying the core, wherein the graded shell comprises at least two monolayers, wherein the at least two monolayers each independently comprise a Group II-VI, Group III-V or a Group IV semiconductor.

  9. Sequential reactions directed by core/shell catalytic reactors.

    Science.gov (United States)

    Wei, Yanhu; Soh, Siowling; Apodaca, Mario M; Kim, Jiwon; Grzybowski, Bartosz A

    2010-04-09

    Millimeter-sized reactor particles made of permeable polymer doped with catalysts arranged in a core/shell fashion direct sequences of chemical reactions (e.g., alkyne coupling followed by hydrogenation or hydrosilylation followed by hydrogenation). Spatial compartmentalization of catalysts coupled with the diffusion of substrates controls reaction order and avoids formation of byproducts. The experimentally observed yields of reaction sequences are reproduced by a theoretical model, which accounts for the reaction kinetics and the diffusion of the species involved.

  10. Smart Core-Shell Nanowire Architectures for Multifunctional Nanoscale Devices

    Science.gov (United States)

    2014-02-16

    Nabet, Jonathan E. Spanier. Picosecond response times in GaAs/ AlGaAs core/shell nanowire-based photodetectors, Applied Physics Letters, (06 2011...which two normally contradictory properties coexist, and its publication. In one example, switchable polar character (ferroelectricity) arising from non... properties of a completely new family of non-perovskite complex oxide that exhibits ferroelectric and antiferromagnetic order. We report on publication of a

  11. Core-shell Au@Pd nanoparticles with enhanced catalytic activity for oxygen reduction reaction via core-shell Au@Ag/Pd constructions.

    Science.gov (United States)

    Chen, Dong; Li, Chengyin; Liu, Hui; Ye, Feng; Yang, Jun

    2015-07-06

    Core-shell nanoparticles often exhibit improved catalytic properties due to the lattice strain created in these core-shell particles. Herein, we demonstrate the synthesis of core-shell Au@Pd nanoparticles from their core-shell Au@Ag/Pd parents. This strategy begins with the preparation of core-shell Au@Ag nanoparticles in an organic solvent. Then, the pure Ag shells are converted into the shells made of Ag/Pd alloy by galvanic replacement reaction between the Ag shells and Pd(2+) precursors. Subsequently, the Ag component is removed from the alloy shell using saturated NaCl solution to form core-shell Au@Pd nanoparticles with an Au core and a Pd shell. In comparison with the core-shell Au@Pd nanoparticles upon directly depositing Pd shell on the Au seeds and commercial Pd/C catalysts, the core-shell Au@Pd nanoparticles via their core-shell Au@Ag/Pd templates display superior activity and durability in catalyzing oxygen reduction reaction, mainly due to the larger lattice tensile effect in Pd shell induced by the Au core and Ag removal.

  12. Preparation of novel core-shell nanoparticles by electrochemical synthesis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Nanostructural gold/polyaniline core/shell composite particles on conducting electrode ITO were successfully prepared via electrochemical polymerization of aniline based on 4-aminothiophenol (4-ATP) capped Au nanoparticles. The new approach to the fabrication included three steps: preparation of gold nanoparticles as core by pulse electrodeposition; formation of ATP monolayer on the gold particle surface, which served as a binder and an initiator; polymerization of aniline monomer initiated by ATP molecules under controlled voltage lower than the voltammetric threshold of aniline polymerization, which assured the formation of polyaniline shell film occurred on gold particles selectively. Topographic images were also studied by AFM, which indicated the diameter of gold nanoparticles were around 250 nm. Coulometry characterization confirmed the shell thickness of polyaniline film was about 30 nm.A possible formation mechanism of the Au/polyaniline core-shell nanocomposites was also proposed. The novel as-prepared core-shell nanoparticles have potential application in constructing biosensor when bioactive enzymes are absorbed or embedded in polyaniline shell film.

  13. Core-shell nanoparticle arrays double the strength of steel.

    Science.gov (United States)

    Seol, J-B; Na, S-H; Gault, B; Kim, J-E; Han, J-C; Park, C-G; Raabe, D

    2017-02-22

    Manipulating structure, defects and composition of a material at the atomic scale for enhancing its physical or mechanical properties is referred to as nanostructuring. Here, by combining advanced microscopy techniques, we unveil how formation of highly regular nano-arrays of nanoparticles doubles the strength of an Fe-based alloy, doped with Ti, Mo, and V, from 500 MPa to 1 GPa, upon prolonged heat treatment. The nanoparticles form at moving heterophase interfaces during cooling from the high-temperature face-centered cubic austenite to the body-centered cubic ferrite phase. We observe MoC and TiC nanoparticles at early precipitation stages as well as core-shell nanoparticles with a Ti-C rich core and a Mo-V rich shell at later precipitation stages. The core-shell structure hampers particle coarsening, enhancing the material's strength. Designing such highly organized metallic core-shell nanoparticle arrays provides a new pathway for developing a wide range of stable nano-architectured engineering metallic alloys with drastically enhanced properties.

  14. Core-shell nanoparticle arrays double the strength of steel

    Science.gov (United States)

    Seol, J.-B.; Na, S.-H.; Gault, B.; Kim, J.-E.; Han, J.-C.; Park, C.-G.; Raabe, D.

    2017-01-01

    Manipulating structure, defects and composition of a material at the atomic scale for enhancing its physical or mechanical properties is referred to as nanostructuring. Here, by combining advanced microscopy techniques, we unveil how formation of highly regular nano-arrays of nanoparticles doubles the strength of an Fe-based alloy, doped with Ti, Mo, and V, from 500 MPa to 1 GPa, upon prolonged heat treatment. The nanoparticles form at moving heterophase interfaces during cooling from the high-temperature face-centered cubic austenite to the body-centered cubic ferrite phase. We observe MoC and TiC nanoparticles at early precipitation stages as well as core-shell nanoparticles with a Ti-C rich core and a Mo-V rich shell at later precipitation stages. The core-shell structure hampers particle coarsening, enhancing the material’s strength. Designing such highly organized metallic core-shell nanoparticle arrays provides a new pathway for developing a wide range of stable nano-architectured engineering metallic alloys with drastically enhanced properties. PMID:28225022

  15. XNBR-grafted halloysite nanotube core-shell as a potential compatibilizer for immiscible polymer systems

    Energy Technology Data Exchange (ETDEWEB)

    Paran, S.M.R.; Naderi, G., E-mail: g.naderi@ippi.ac.ir; Ghoreishy, M.H.R.

    2016-09-30

    Highlights: • Attached an utilitarian silane coupling agent to the HNT via a sol-gel method. • Developed and analyzed the HNT/XNBR core-shell particles via sol-gel technique. • Enhanced the reactivity of the surface of HNT through XNBR grafting. • The act of HNT/XNBR as a compatibilizer in PA6/NBR TPEs. • Immiscible Polymer System with a good balanced physical and mechanical properties. - Abstract: Halloysite nanotubes (HNTs) grafted with carboxylated nitrile byutadiene rubber (XNBR) were synthesized via a sol-gel method. The HNTs as an inorganic cores were pre-treated with 3-Glycidoxypropyl trimethoxysilane, then successfully coated with the XNBR as an organic shell. The properties of XNBR-grafted HNTs were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results suggested that the XNBR grafted to the surfaces of HNTs successfully. Then the TPE nanocomposites based on polyamide-6 (PA6) and nitrile butadiene rubber (NBR) containing various XNBR-grafted and pristine HNTs were prepared via a direct melt mixing method. The morphology, mechanical, dynamic mechanical and rheological properties of the prepared TPE nanocomposites were investigated. The results show that the XNBR-grafted HNTs can effectively improve the morphology and mechanical properties of the PA6/NBR TPEs. The morphology study of the prepared nanocomposites show that the effect of XNBR-grafted HNTs on the size reduction of NBR phase is markedly more effective than the pristine HNTs and rose by 50% in the same concentrations. Mechanical measurements show that the Young’s modulus of the TPE nanocomposites rose by 60% in just 7 wt% of XNBR-grafted HNT loading. The results indicate that the introduction of HNT/XNBR core-shells into the PA6/NBR TPEs can enhances the interfacial interactions

  16. XNBR-grafted halloysite nanotube core-shell as a potential compatibilizer for immiscible polymer systems

    Science.gov (United States)

    Paran, S. M. R.; Naderi, G.; Ghoreishy, M. H. R.

    2016-09-01

    Halloysite nanotubes (HNTs) grafted with carboxylated nitrile byutadiene rubber (XNBR) were synthesized via a sol-gel method. The HNTs as an inorganic cores were pre-treated with 3-Glycidoxypropyl trimethoxysilane, then successfully coated with the XNBR as an organic shell. The properties of XNBR-grafted HNTs were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results suggested that the XNBR grafted to the surfaces of HNTs successfully. Then the TPE nanocomposites based on polyamide-6 (PA6) and nitrile butadiene rubber (NBR) containing various XNBR-grafted and pristine HNTs were prepared via a direct melt mixing method. The morphology, mechanical, dynamic mechanical and rheological properties of the prepared TPE nanocomposites were investigated. The results show that the XNBR-grafted HNTs can effectively improve the morphology and mechanical properties of the PA6/NBR TPEs. The morphology study of the prepared nanocomposites show that the effect of XNBR-grafted HNTs on the size reduction of NBR phase is markedly more effective than the pristine HNTs and rose by 50% in the same concentrations. Mechanical measurements show that the Young's modulus of the TPE nanocomposites rose by 60% in just 7 wt% of XNBR-grafted HNT loading. The results indicate that the introduction of HNT/XNBR core-shells into the PA6/NBR TPEs can enhances the interfacial interactions and provides a more fine rubber phase morphology and controlled mechanical properties in comparison with the accordingly TPE nanocomposites containing pristine HNTs.

  17. Ion Structure Near a Core-Shell Dielectric Nanoparticle

    Science.gov (United States)

    Ma, Manman; Gan, Zecheng; Xu, Zhenli

    2017-02-01

    A generalized image charge formulation is proposed for the Green's function of a core-shell dielectric nanoparticle for which theoretical and simulation investigations are rarely reported due to the difficulty of resolving the dielectric heterogeneity. Based on the formulation, an efficient and accurate algorithm is developed for calculating electrostatic polarization charges of mobile ions, allowing us to study related physical systems using the Monte Carlo algorithm. The computer simulations show that a fine-tuning of the shell thickness or the ion-interface correlation strength can greatly alter electric double-layer structures and capacitances, owing to the complicated interplay between dielectric boundary effects and ion-interface correlations.

  18. Core-shell colloidal particles with dynamically tunable scattering properties.

    Science.gov (United States)

    Meng, Guangnan; Manoharan, Vinothan N; Perro, Adeline

    2017-09-27

    We design polystyrene-poly(N'-isopropylacrylamide-co-acrylic acid) core-shell particles that exhibit dynamically tunable scattering. We show that under normal solvent conditions the shell is nearly index-matched to pure water, and the particle scattering is dominated by Rayleigh scattering from the core. As the temperature or salt concentration increases, both the scattering cross-section and the forward scattering increase, characteristic of Mie scatterers. The magnitude of the change in the scattering cross-section and scattering anisotropy can be controlled through the solvent conditions and the size of the core. Such particles may find use as optical switches or optical filters with tunable opacity.

  19. Effective Field Theory and the No-Core Shell Model

    Directory of Open Access Journals (Sweden)

    Stetcua I.

    2010-04-01

    Full Text Available In finite model space suitable for many-body calculations via the no-core shell model (NCSM, I illustrate the direct application of the effective field theory (EFT principles to solving the many-body Schrödinger equation. Two different avenues for fixing the low-energy constants naturally arising in an EFT approach are discussed. I review results for both nuclear and trapped atomic systems, using effective theories formally similar, albeit describing different underlying physics.

  20. Polybutylacrylate/poly (methyl methacrylate) Core-Shell Elastic Particles as Epoxy Resin Toughener:Part II Toughness on DGEBA/DDM system

    Institute of Scientific and Technical Information of China (English)

    Jianli WANG; Myonghoon LEE; Kejian YAO; Jianbin JI; Xiaomei YU

    2004-01-01

    Mechanical properties of epoxy resin were investigated by adding core-shell elastic particles (CSEP). The results indicated that optimized core-shell ratio was 60/40 and the loading volume of CSEP was 10 phr (per hundred parts of epoxy resin by weight). The impact strength of modified systems increased apparently with the decrease of core sizes. However, the shearing strength changed gently with the particle sizes. CSEP with lightly crosslinked rubbery core showed more effectiveness on toughness than others. With solution blending, CSEP could be dispersed in epoxy matrix well, and the morphologies of dispersed rubber domains were controlled perfectly by CSEP whose structure was predesigned. A cavitation-shearing band toughness mechanism was observed from the SEM micrographs of fracture surface. It also was found that the deforming temperature (DT) of modified epoxy did not decline apparently.

  1. Organized thiol functional groups in mesoporous core shell colloids

    Energy Technology Data Exchange (ETDEWEB)

    Marchena, Martin H. [Gerencia Quimica, Centro Atomico Constituyentes, Comision Nacional de Energia Atomica (CNEA), Avda. Gral. Paz 1499, B1650KNA Buenos Aires (Argentina); Granada, Mara [Centro Atomico Bariloche-CNEA, 8400 San Carlos de Bariloche (Argentina); Instituto Balseiro-Centro Atomico Bariloche-CNEA, San Carlos de Bariloche 8400 (Argentina); Bordoni, Andrea V. [Gerencia Quimica, Centro Atomico Constituyentes, Comision Nacional de Energia Atomica (CNEA), Avda. Gral. Paz 1499, B1650KNA Buenos Aires (Argentina); Joselevich, Maria [Asociacion Civil Expedicion Ciencia, Cabrera 4948, C1414BGP Buenos Aires (Argentina); Troiani, Horacio [Centro Atomico Bariloche-CNEA, 8400 San Carlos de Bariloche (Argentina); Instituto Balseiro-Centro Atomico Bariloche-CNEA, San Carlos de Bariloche 8400 (Argentina); Williams, Federico J. [DQIAQyF-INQUIMAE FCEN, Universidad de Buenos Aires, Ciudad Universitaria, Pabellon II, C1428EHA Buenos Aires (Argentina); Wolosiuk, Alejandro, E-mail: wolosiuk@cnea.gov.ar [Gerencia Quimica, Centro Atomico Constituyentes, Comision Nacional de Energia Atomica (CNEA), Avda. Gral. Paz 1499, B1650KNA Buenos Aires (Argentina)

    2012-03-15

    The co-condensation in situ of tetraethoxysilane (TEOS) and mercaptopropyltrimethoxysilane (MPTMS) using cetyltrimethylammonium bromide (CTAB) as a template results in the synthesis of multilayered mesoporous structured SiO{sub 2} colloids with 'onion-like' chemical environments. Thiol groups were anchored to an inner selected SiO{sub 2} porous layer in a bilayered core shell particle producing different chemical regions inside the colloidal layered structure. X-Ray Photoelectron Spectroscopy (XPS) shows a preferential anchoring of the -SH groups in the double layer shell system, while porosimetry and simple chemical modifications confirm that pores are accessible. We can envision the synthesis of interesting colloidal objects with defined chemical environments with highly controlled properties. - Graphical abstract: Mesoporous core shell SiO{sub 2} colloids with organized thiol groups. Highlights: Black-Right-Pointing-Pointer Double shell mesoporous silica colloids templated with CTAB. Black-Right-Pointing-Pointer Sequential deposition of mesoporous SiO{sub 2} layers with different chemistries. Black-Right-Pointing-Pointer XPS shows the selective functionalization of mesoporous layers with thiol groups.

  2. Core-size-dependent catalytic properties of bimetallic Au/Ag core-shell nanoparticles.

    Science.gov (United States)

    Haldar, Krishna Kanta; Kundu, Simanta; Patra, Amitava

    2014-12-24

    Bimetallic core-shell nanoparticles have recently emerged as a new class of functional materials because of their potential applications in catalysis, surface enhanced Raman scattering (SERS) substrate and photonics etc. Here, we have synthesized Au/Ag bimetallic core-shell nanoparticles with varying the core diameter. The red-shifting of the both plasmonic peaks of Ag and Au confirms the core-shell structure of the nanoparticles. Transmission electron microscopy (TEM) analysis, line scan EDS measurement and UV-vis study confirm the formation of core-shell nanoparticles. We have examined the catalytic activity of these core-shell nanostructures in the reaction between 4-nitrophenol (4-NP) and NaBH4 to form 4-aminophenol (4-AP) and the efficiency of the catalytic reaction is found to be increased with increasing the core size of Au/Ag core-shell nanocrystals. The catalytic efficiency varies from 41.8 to 96.5% with varying core size from 10 to 100 nm of Au/Ag core-shell nanoparticles, and the Au100/Ag bimetallic core-shell nanoparticle is found to be 12-fold more active than that of the pure Au nanoparticles with 100 nm diameter. Thus, the catalytic properties of the metal nanoparticles are significantly enhanced because of the Au/Ag core-shell structure, and the rate is dependent on the size of the core of the nanoparticles.

  3. Design rules for core/shell nanowire resonant emitters

    Science.gov (United States)

    Kim, Da-Som; Kim, Sun-Kyung

    2017-01-01

    We study design principles to boost the extraction of light from core/shell GaN nanowire optical emitters. A full-vectorial electromagnetic simulation reveals that the extraction efficiency of an emitter within a nanowire cavity depends strongly on its position; the efficiency becomes maximized as the emitter's location approaches the center of the structure. The total extraction of light is sinusoidally modulated by the nanowire diameter, which is directly correlated with optical resonances. The introduction of a conformal dielectric coating on a nanowire leads to a dramatic enhancement in the extraction efficiency, which results from an increase in side emission owing to an optical antenna effect. A simple high-refractive-index dielectric coating approximately doubles the total extraction efficiency of a nanowire LED. These numerical findings will be valuable in providing strategies for high-efficiency nanowire-based optical emitters.

  4. Stability of core-shell nanowires in selected model solutions

    Science.gov (United States)

    Kalska-Szostko, B.; Wykowska, U.; Basa, A.; Zambrzycka, E.

    2015-03-01

    This paper presents the studies of stability of magnetic core-shell nanowires prepared by electrochemical deposition from an acidic solution containing iron in the core and modified surface layer. The obtained nanowires were tested according to their durability in distilled water, 0.01 M citric acid, 0.9% NaCl, and commercial white wine (12% alcohol). The proposed solutions were chosen in such a way as to mimic food related environment due to a possible application of nanowires as additives to, for example, packages. After 1, 2 and 3 weeks wetting in the solutions, nanoparticles were tested by Infrared Spectroscopy, Atomic Absorption Spectroscopy, Transmission Electron Microscopy and X-ray diffraction methods.

  5. Vertical Ge/Si Core/Shell Nanowire Junctionless Transistor.

    Science.gov (United States)

    Chen, Lin; Cai, Fuxi; Otuonye, Ugo; Lu, Wei D

    2016-01-13

    Vertical junctionless transistors with a gate-all-around (GAA) structure based on Ge/Si core/shell nanowires epitaxially grown and integrated on a ⟨111⟩ Si substrate were fabricated and analyzed. Because of efficient gate coupling in the nanowire-GAA transistor structure and the high density one-dimensional hole gas formed in the Ge nanowire core, excellent P-type transistor behaviors with Ion of 750 μA/μm were obtained at a moderate gate length of 544 nm with minimal short-channel effects. The experimental data can be quantitatively modeled by a GAA junctionless transistor model with few fitting parameters, suggesting the nanowire transistors can be fabricated reliably without introducing additional factors that can degrade device performance. Devices with different gate lengths were readily obtained by tuning the thickness of an etching mask film. Analysis of the histogram of different devices yielded a single dominate peak in device parameter distribution, indicating excellent uniformity and high confidence of single nanowire operation. Using two vertical nanowire junctionless transistors, a PMOS-logic inverter with near rail-to-rail output voltage was demonstrated, and device matching in the logic can be conveniently obtained by controlling the number of nanowires employed in different devices rather than modifying device geometry. These studies show that junctionless transistors based on vertical Ge/Si core/shell nanowires can be fabricated in a controlled fashion with excellent performance and may be used in future hybrid, high-performance circuits where bottom-up grown nanowire devices with different functionalities can be directly integrated with an existing Si platform.

  6. Sensitized solar cells with colloidal PbS-CdS core-shell quantum dots

    NARCIS (Netherlands)

    Lai, Lai-Hung; Protesescu, Loredana; Kovalenko, Maksym V.; Loi, Maria A.

    2014-01-01

    We report on the fabrication of PbS-CdS (core-shell) quantum dot (QD)-sensitized solar cells by direct adsorption of core-shell QDs on mesoporous TiO2 followed by 3-mercaptopropionic acid ligand exchange. PbS-CdS QD-sensitized solar cells show 4 times higher efficiency with respect to solar cells se

  7. Sensitized solar cells with colloidal PbS-CdS core-shell quantum dots

    NARCIS (Netherlands)

    Lai, Lai-Hung; Protesescu, Loredana; Kovalenko, Maksym V.; Loi, Maria A.

    2014-01-01

    We report on the fabrication of PbS-CdS (core-shell) quantum dot (QD)-sensitized solar cells by direct adsorption of core-shell QDs on mesoporous TiO2 followed by 3-mercaptopropionic acid ligand exchange. PbS-CdS QD-sensitized solar cells show 4 times higher efficiency with respect to solar cells

  8. CNTs/mesostructured silica core-shell nanowires via interfacial surfactant templating

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lei; QIAO ShiZhang; YAN ZiFeng; ZHENG HuaJun; LI Li; DING RongGang; LU GaoQing(Max)

    2009-01-01

    Carbon nanotubes (CNTs)/mesostructured silica core-shell nanowires with a carbon nanotube core and controllable highly ordered periodic mesoporous silica shell are syntheiszed via the interfacial surfac-tant template. The core-shell nanowires are characterized by transmission electron microscope (TEM), X-ray diffraction pattern (XRD) and nitrogen sorption/desorption. The results indicate that the core-shell nanowires have highly ordered periodic mesoporous silica shell (space group p6mm), high BET sur-face area and narrow pore size distribution. Moreover, the morphology of core-shell nanowires can be controlled by the pH value. The core-shell nanowires have promising applications in biosensors, nanoprobes and energy storage due to their good dispersibility in polar solvents.

  9. Study on the effect of electrostatic interaction on core-shell nanoparticles preparation with microemulsion technique

    Institute of Scientific and Technical Information of China (English)

    HE Xiaoxiao; WANG Kemin; TAN Weihong; CHEN Jiyun; DUAN Jinghua; YUAN Yin; LIN Xia

    2005-01-01

    The routine method for preparation of silica core-shell nanoparticles (NPs) is to carry out nucleation and shell coating through the hydrolysis of silane in water in oil (W/O) microemulsion to form three-dimensional netted silica shell. We found that electrostatic interaction of the core materials with shell materials would determine whether the stable core-shell silica NPs formed or not. The traditional important factors such as molecular weight of core materials or the thickness of the shell have no obvious relationship with it. And the stability of the core-shell silica NPs can be improved after changing the electric charge polarity by regulating the experiment condition of relevant materials if some core materials cannot be doped inside to form the stable core-shell silica NPs based on the traditional method, which provided experimental and theoretic foundation for preparation and application of the core-shell silica NPs.

  10. Design, synthesis and applications of core-shell, hollow core, and nanorattle multifunctional nanostructures.

    Science.gov (United States)

    El-Toni, Ahmed Mohamed; Habila, Mohamed A; Labis, Joselito Puzon; ALOthman, Zeid A; Alhoshan, Mansour; Elzatahry, Ahmed A; Zhang, Fan

    2016-02-01

    With the evolution of nanoscience and nanotechnology, studies have been focused on manipulating nanoparticle properties through the control of their size, composition, and morphology. As nanomaterial research has progressed, the foremost focus has gradually shifted from synthesis, morphology control, and characterization of properties to the investigation of function and the utility of integrating these materials and chemical sciences with the physical, biological, and medical fields, which therefore necessitates the development of novel materials that are capable of performing multiple tasks and functions. The construction of multifunctional nanomaterials that integrate two or more functions into a single geometry has been achieved through the surface-coating technique, which created a new class of substances designated as core-shell nanoparticles. Core-shell materials have growing and expanding applications due to the multifunctionality that is achieved through the formation of multiple shells as well as the manipulation of core/shell materials. Moreover, core removal from core-shell-based structures offers excellent opportunities to construct multifunctional hollow core architectures that possess huge storage capacities, low densities, and tunable optical properties. Furthermore, the fabrication of nanomaterials that have the combined properties of a core-shell structure with that of a hollow one has resulted in the creation of a new and important class of substances, known as the rattle core-shell nanoparticles, or nanorattles. The design strategies of these new multifunctional nanostructures (core-shell, hollow core, and nanorattle) are discussed in the first part of this review. In the second part, different synthesis and fabrication approaches for multifunctional core-shell, hollow core-shell and rattle core-shell architectures are highlighted. Finally, in the last part of the article, the versatile and diverse applications of these nanoarchitectures in

  11. Design, synthesis and applications of core-shell, hollow core, and nanorattle multifunctional nanostructures

    Science.gov (United States)

    El-Toni, Ahmed Mohamed; Habila, Mohamed A.; Labis, Joselito Puzon; Alothman, Zeid A.; Alhoshan, Mansour; Elzatahry, Ahmed A.; Zhang, Fan

    2016-01-01

    With the evolution of nanoscience and nanotechnology, studies have been focused on manipulating nanoparticle properties through the control of their size, composition, and morphology. As nanomaterial research has progressed, the foremost focus has gradually shifted from synthesis, morphology control, and characterization of properties to the investigation of function and the utility of integrating these materials and chemical sciences with the physical, biological, and medical fields, which therefore necessitates the development of novel materials that are capable of performing multiple tasks and functions. The construction of multifunctional nanomaterials that integrate two or more functions into a single geometry has been achieved through the surface-coating technique, which created a new class of substances designated as core-shell nanoparticles. Core-shell materials have growing and expanding applications due to the multifunctionality that is achieved through the formation of multiple shells as well as the manipulation of core/shell materials. Moreover, core removal from core-shell-based structures offers excellent opportunities to construct multifunctional hollow core architectures that possess huge storage capacities, low densities, and tunable optical properties. Furthermore, the fabrication of nanomaterials that have the combined properties of a core-shell structure with that of a hollow one has resulted in the creation of a new and important class of substances, known as the rattle core-shell nanoparticles, or nanorattles. The design strategies of these new multifunctional nanostructures (core-shell, hollow core, and nanorattle) are discussed in the first part of this review. In the second part, different synthesis and fabrication approaches for multifunctional core-shell, hollow core-shell and rattle core-shell architectures are highlighted. Finally, in the last part of the article, the versatile and diverse applications of these nanoarchitectures in

  12. Core-shell interaction and its impact on the optical absorption of pure and doped core-shell CdSe/ZnSe nanoclusters.

    Science.gov (United States)

    Wang, Xinqin; Cui, Yingqi; Yu, Shengping; Zeng, Qun; Yang, Mingli

    2016-04-07

    The structural, electronic, and optical properties of core-shell nanoclusters, (CdSe)(x)@(CdSe)(y) and their Zn-substituted complexes of x = 2-4 and y = 16-28, were studied with density functional theory calculations. The substitution was applied in the cores, the shells, and/or the whole clusters. All these clusters are characterized by their core-shell structures in which the core-shell interaction was found different from those in core or in shell, as reflected by their bondlengths, volumes, and binding energies. Moreover, the core and shell combine together to compose a new cluster with electronic and optical properties different from those of separated individuals, as reflected by their HOMO-LUMO gaps and optical absorptions. With the substitution of Cd by Zn, the structural, electronic, and optical properties of clusters change regularly. The binding energy increases with Zn content, attributed to the strong Zn-Se bonding. For the same core/shell, the structure with a CdSe shell/core has a narrower gap than that with a ZnSe shell/core. The optical absorption spectra also change accordingly with Zn substitution. The peaks blueshift with increasing Zn concentration, accompanying with shape variations in case large number of Cd atoms are substituted. Our calculations reveal the core-shell interaction and its influence on the electronic and optical properties of the core-shell clusters, suggesting a composition-structure-property relationship for the design of core-shell CdSe and ZnSe nanoclusters.

  13. CSR as Aspirational Talk

    DEFF Research Database (Denmark)

    Christensen, Lars Thøger; Morsing, Mette; Thyssen, Ole

    2013-01-01

    Most writings on corporate social responsibility (CSR) treat lack of consistency between organizational CSR talk and action as a serious problem that needs to be eliminated. In this article, we argue that differences between words and action are not necessarily a bad thing and that such discrepan......Most writings on corporate social responsibility (CSR) treat lack of consistency between organizational CSR talk and action as a serious problem that needs to be eliminated. In this article, we argue that differences between words and action are not necessarily a bad thing...... and that such discrepancies have the potential to stimulate CSR improvements. We draw on a research tradition that regards communication as performative to challenge the conventional assumption that CSR communication is essentially superficial, as opposed to CSR action. In addition, we extend notions of organizational...... hypocrisy to argue that aspirational CSR talk may be an important resource for social change, even when organizations do not fully live up to their aspirations....

  14. Strategic CSR in Afghanistan

    DEFF Research Database (Denmark)

    Azizi, Sameer

    CSR is a rising phenomena in Afghanistan – but why are firms concerned about CSR in a least-developed context such as Afghanistan, and what are the strategic benefits? This paper is one of the first to explore these CSR issues in a least-developed country. It does so by focusing on CSR...... in the Afghan telecommunication sector and in particular on ‘Roshan’ as a case company. The findings of this paper are two-folded. First, it provides an overview of the CSR practices in the telecommunication sector in Afghanistan. Second, it focuses on one case and explains whether Roshan can gain strategic...... advantages through CSR in Afghanistan, and if so which and how these strategic benefits are gained. The paper shows that the developmental challenges of Afghanistan are the key explanations for why companies engage in CSR. Roshan has engaged in proactive CSR to overcome the contextual barriers for growth...

  15. CSR and Beyond

    DEFF Research Database (Denmark)

    Morsing, Mette; Strand, Robert

    2014-01-01

    Review of: CSR and Beyond. A Nordic Perspective Edited by Atle Midttun (Oslo: Cappelen Damm Akademisk, 2013)......Review of: CSR and Beyond. A Nordic Perspective Edited by Atle Midttun (Oslo: Cappelen Damm Akademisk, 2013)...

  16. Core-shell hexacyanoferrate for superior Na-ion batteries

    Science.gov (United States)

    Wan, Min; Tang, Yang; Wang, Lili; Xiang, Xinghua; Li, Xiaocheng; Chen, Kongyao; Xue, Lihong; Zhang, Wuxing; Huang, Yunhui

    2016-10-01

    Sodium iron hexacyanoferrate (Fe-HCF) is regarded as a potential cathode material for sodium-ion batteries (SIBs) due to its high specific capacity, low cost, facile synthesis and environmentally friendly. However, Fe-HCF always suffers from poor electronic conductivity, low crystallinity and side reactions with electrolyte, leading to poor rate performance, low coulombic efficiency and deterioration of cycling stability. Herein, we report a green and facile synthesis to encapsulate Fe-HCF microcubes with potassium nickel hexacyanoferrate (Ni-HCF). The core-shell Fe-HCF@Ni-HCF composite delivers a reversible capacity of 79.7 mAh g-1 at 200 mA g-1 after 800 cycles and a high coulombic efficiency of 99.3%. In addition, Fe-HCF@Ni-HCF exhibits excellent rate performance, retaining 60 mAh g-1 at 2000 mA g-1. The results show that Fe-HCF@Ni-HCF integrates the advantages of both Fe-HCF and Ni-HCF, making it electrochemically stable as cathode material for SIBs.

  17. Nonlocal dielectric effects in core-shell nanowires.

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, J. M.; Gray, S. K.; Schatz, G. C. (Center for Nanoscale Materials); ( CSE); (Northwestern Univ.)

    2010-01-01

    We study the optical spectra and near fields of core-shell nanowires (nanoshells), using a recently developed finite-difference method that allows for a spatially nonlocal dielectric response. We first analyze the parameters of the nonlocal model by making comparisons with related experimental data and previous theoretical work. We then investigate how nonlocal effects are dependent on nanoshell features, such as shell thickness, overall size, and the ratio of core radius to shell radius. We demonstrate that the shell thickness along the longitudinal direction of the incident light is the primary controlling factor of nonlocal effects, which appear as anomalous absorption resonances and blueshifts in the localized surface plasmon resonance (LSPR) positions, relative to local theory. In addition, we show that the amount of blueshift depends on the order of the LSPR. The optical responses of nanoshells immersed in various refractive index (RI) environments are also studied. We show that the nonlocal anomalous absorption features are relatively insensitive to RI changes, but the blueshift of the dipolar LSPR varies nonlinearly.

  18. Homogeneous protein analysis by magnetic core-shell nanorod probes

    KAUST Repository

    Schrittwieser, Stefan

    2016-03-29

    Studying protein interactions is of vital importance both to fundamental biology research and to medical applications. Here, we report on the experimental proof of a universally applicable label-free homogeneous platform for rapid protein analysis. It is based on optically detecting changes in the rotational dynamics of magnetically agitated core-shell nanorods upon their specific interaction with proteins. By adjusting the excitation frequency, we are able to optimize the measurement signal for each analyte protein size. In addition, due to the locking of the optical signal to the magnetic excitation frequency, background signals are suppressed, thus allowing exclusive studies of processes at the nanoprobe surface only. We study target proteins (soluble domain of the human epidermal growth factor receptor 2 - sHER2) specifically binding to antibodies (trastuzumab) immobilized on the surface of our nanoprobes and demonstrate direct deduction of their respective sizes. Additionally, we examine the dependence of our measurement signal on the concentration of the analyte protein, and deduce a minimally detectable sHER2 concentration of 440 pM. For our homogeneous measurement platform, good dispersion stability of the applied nanoprobes under physiological conditions is of vital importance. To that end, we support our measurement data by theoretical modeling of the total particle-particle interaction energies. The successful implementation of our platform offers scope for applications in biomarker-based diagnostics as well as for answering basic biology questions.

  19. Supramolecular core-shell nanoparticles for photoconductive device applications

    Science.gov (United States)

    Cheng, Chih-Chia; Chen, Jem-Kun; Shieh, Yeong-Tarng; Lee, Duu-Jong

    2016-08-01

    We report a breakthrough discovery involving supramolecular-based strategies to construct novel core-shell heterojunction nanoparticles with hydrophilic adenine-functionalized polythiophene (PAT) as the core and hydrophobic phenyl-C61-butyric acid methyl ester (PCBM) as the shell, which enables the conception of new functional supramolecular assemblies for constructing functional nanomaterials for applications in optoelectronic devices. The generated nanoparticles exhibit uniform spherical shape, well-controlled tuning of particle size with narrow size distributions, and excellent electrochemical stability in solution and the solid state owing to highly efficient energy transfer from PAT to PCBM. When the PAT/PCBM nanoparticles were fabricated into a photoconducting layer in an electronic device, the resulting device showed excellent electric conduction characteristics, including an electrically-tunable voltage-controlled switch, and high short-circuit current and open-circuit voltage. These observations demonstrate how the self-assembly of PAT/PCBM into specific nanostructures may help to promote efficient charge generation and transport processes, suggesting potential for a wide variety of applications as a promising candidate material for bulk heterojunction polymer devices.

  20. Recent Developments in No-Core Shell-Model Calculations

    Energy Technology Data Exchange (ETDEWEB)

    Navratil, P; Quaglioni, S; Stetcu, I; Barrett, B R

    2009-03-20

    We present an overview of recent results and developments of the no-core shell model (NCSM), an ab initio approach to the nuclear many-body problem for light nuclei. In this aproach, we start from realistic two-nucleon or two- plus three-nucleon interactions. Many-body calculations are performed using a finite harmonic-oscillator (HO) basis. To facilitate convergence for realistic inter-nucleon interactions that generate strong short-range correlations, we derive effective interactions by unitary transformations that are tailored to the HO basis truncation. For soft realistic interactions this might not be necessary. If that is the case, the NCSM calculations are variational. In either case, the ab initio NCSM preserves translational invariance of the nuclear many-body problem. In this review, we, in particular, highlight results obtained with the chiral two- plus three-nucleon interactions. We discuss efforts to extend the applicability of the NCSM to heavier nuclei and larger model spaces using importance-truncation schemes and/or use of effective interactions with a core. We outline an extension of the ab initio NCSM to the description of nuclear reactions by the resonating group method technique. A future direction of the approach, the ab initio NCSM with continuum, which will provide a complete description of nuclei as open systems with coupling of bound and continuum states is given in the concluding part of the review.

  1. Business Ethics in CSR

    OpenAIRE

    Birkvad Bernth, Camilla; Houmøller Mortensen, Kasper; Calles, Mark Benjamin; Wind, Martin; Saalfeldt, Rie

    2013-01-01

    This project seeks to dissect the advent of CSR in business practice from the view of ethics. We perform this by laying out the theories of CSR, business ethics, deontology and utilitarianism. We then use the case studies of Lundbeck, The Body Shop, and British American Tobacco, to dissect some productions of CSR. These are compared to the above mentioned theories on ethics. We conclude that business ethics and CSR are only as good as the ethical base upon which they are built.

  2. CSR is dead. Long live CSR

    DEFF Research Database (Denmark)

    Rasche, Andreas; Morsing, Mette; Moon, Jeremy

    2017-01-01

    We should not focus too much on labels – labels come and labels go. CSR is a journey that has just begun and that continues to unfold on a daily basis.......We should not focus too much on labels – labels come and labels go. CSR is a journey that has just begun and that continues to unfold on a daily basis....

  3. Fabrication of core-shell micro/nanoparticles for programmable dual drug release by emulsion electrospraying

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yazhou, E-mail: yazhou_wang@cqu.edu.cn; Zhang Yiqiong; Wang Bochu, E-mail: wangbc2000@126.com; Cao Yang [Chongqing University, Key Laboratory of Biorheological Science and Technology, Ministry of Education, College of Bioengineering (China); Yu Qingsong [University of Missouri, Department of Mechanical and Aerospace Engineering (United States); Yin Tieying [Chongqing University, Key Laboratory of Biorheological Science and Technology, Ministry of Education, College of Bioengineering (China)

    2013-06-15

    The study aimed at constructing a novel drug delivery system for programmable multiple drug release controlled with core-shell structure. The core-shell structure consisted of chitosan nanoparticles as core and polyvinylpyrrolidone micro/nanocoating as shell to form core-shell micro/nanoparticles, which was fabricated by ionic gelation and emulsion electrospray methods. As model drug agents, Naproxen and rhodamine B were encapsulated in the core and shell regions, respectively. The core-shell micro/nanoparticles thus fabricated were characterized and confirmed by scanning electron microscope, transmission electron microscope, and fluorescence optical microscope. The core-shell micro/nanoparticles showed good release controllability through drug release experiment in vitro. It was noted that a programmable release pattern for dual drug agents was also achieved by adjusting their loading regions in the core-shell structures. The results indicate that emulsion electrospraying technology is a promising approach in fabrication of core-shell micro/nanoparticles for programmable dual drug release. Such a novel multi-drug delivery system has a potential application for the clinical treatment of cancer, tuberculosis, and tissue engineering.

  4. CSR in SMEs

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Jamali, Dima; Vives, Antonio

    (Fox, 2005). In fact, when it comes to their role in promoting corporate social responsibility (CSR) in developing countries, the verdict is still out there in terms of the extent to which SMEs engage in CSR, and whether their CSR involvement makes any difference to the profitability of firms, workers...

  5. CSR communication: quo vadis?

    NARCIS (Netherlands)

    Golob, U.; Podnar, K.; Elving, W.J.; Ellerup Nielsen, A.; Thomsen, C.; Schultz, F.

    2013-01-01

    Purpose - This paper aims to introduce the special issue on CSR communication attached to the First International CSR Communication Conference held in Amsterdam in October 2011. The aim of the introduction is also to review CSR communication papers published in scholarly journals in order to make a

  6. CSR communication: quo vadis?

    NARCIS (Netherlands)

    Golob, U.; Podnar, K.; Elving, W.J.; Ellerup Nielsen, A.; Thomsen, C.; Schultz, F.

    2013-01-01

    Purpose - This paper aims to introduce the special issue on CSR communication attached to the First International CSR Communication Conference held in Amsterdam in October 2011. The aim of the introduction is also to review CSR communication papers published in scholarly journals in order to make a

  7. Microfluidic synthesis of Ag@Cu2O core-shell nanoparticles with enhanced photocatalytic activity.

    Science.gov (United States)

    Tao, Sha; Yang, Mei; Chen, Huihui; Ren, Mingyue; Chen, Guangwen

    2017-01-15

    A microfluidic-based method for the continuous synthesis of Ag@Cu2O core-shell nanoparticles (NPs) has been developed. It only took 32s to obtain Ag@Cu2O core-shell NPs, indicating a high efficiency of this microfluidic-based method. Triangular Ag nanoprisms were employed as the cores for the overgrowth of Cu2O through the reduction of Cu(OH)4(2-) with ascorbic acid. The as-synthesized samples were characterized by XRD, TEM, SEM, HAADF-STEM, EDX, HRTEM, UV-vis spectra and N2 adsorption-desorption. The characterization results revealed that the as-synthesized Ag@Cu2O core-shell NPs exhibited a well-defined core-shell nanostructure with a polycrystalline shell, which was composed of numbers of Cu2O domains epitaxially growing on the triangular Ag nanoprism. It was concluded that the synthesis parameters such as the molar ratio of trisodium citrate to AgNO3, H2O2 to AgNO3, NaOH to CuSO4, ascorbic acid to CuSO4 and AgNO3 to CuSO4 had significant effect on the synthesis of Ag@Cu2O core-shell NPs. Moreover, Ag@Cu2O core-shell NPs exhibited superior catalytic activity in comparison with pristine Cu2O NPs towards the visible light-driven degradation of methyl orange. This enhanced photocatalytic activity of Ag@Cu2O core-shell NPs was attributed to the larger BET surface area and improved charge separation efficiency. The trapping experiment indicated that holes and superoxide anion radicals were the major reactive species in the photodegradation of methyl orange over Ag@Cu2O core-shell NPs. In addition, Ag@Cu2O core-shell NPs showed no obvious deactivation in the cyclic test.

  8. CSR schemes in agribusiness

    DEFF Research Database (Denmark)

    Pötz, Katharina Anna; Haas, Rainer; Balzarova, Michaela

    2013-01-01

    Purpose – The rise of CSR followed a demand for CSR standards and guidelines. In a sector already characterized by a large number of standards, the authors seek to ask what CSR schemes apply to agribusiness, and how they can be systematically compared and analysed. Design....../methodology/approach – Following a deductive-inductive approach the authors develop a model to compare and analyse CSR schemes based on existing studies and on coding qualitative data on 216 CSR schemes. Findings – The authors confirm that CSR standards and guidelines have entered agribusiness and identify a complex landscape...... of schemes that can be categorized on focus areas, scales, mechanisms, origins, types and commitment levels. Research limitations/implications – The findings contribute to conceptual and empirical research on existing models to compare and analyse CSR standards. Sampling technique and depth of analysis limit...

  9. Coordination polymer core/shell structures: Preparation and up/down-conversion luminescence.

    Science.gov (United States)

    Li, Bingmei; Xu, Hualan; Xiao, Chen; Shuai, Min; Chen, Weimin; Zhong, Shengliang

    2016-10-01

    Coordination polymer (CP) core-shell nanoparticles with Gd-based CP (GdCP) as core and Eu-based CP (EuCP) as shell have been successfully prepared. Allantoin was employed as the organic building block without the assistance of any template. The composition, size and structure of the core-shell nanospheres were well characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermo-gravimetric analysis (TG). Results show that the resultant cores are uniform nanospheres with diameter of approximately 45nm, while the diameters of the core-shell nanospheres are increased to approximately 60nm. The core-shell products show enhanced luminescence efficiency than the core under 980nm laser excitation and decreased down-conversion luminescence when excited at 394nm.

  10. Coaxial electrospun polyurethane core-shell nanofibers for shape memory and antibacterial nanomaterials

    Directory of Open Access Journals (Sweden)

    2011-02-01

    Full Text Available A novel kind of shape memory polyurethane (SMPU nanofibers with core-shell nanostructure is fabricated using coaxial electrospinning. Transmission electron microscopy (TEM and scanning electron microscopy (SEM results show that nanofibers with core-shell structure or bead-on-string structure can be electrospun successfully from the core solution of polycaprolactone based SMPU (CLSMPU and shell solution of pyridine containing polyurethane (PySMPU. In addition to the excellent shape memory effect with good shape fixity, excellent antibacterial activity against both gramnegative bacteria and gram-positive bacteria are achieved in the CLSMPU-PySMPU core-shell nanofiber. Finally, it is proposed that the antibacterial mechanism should be resulted from the PySMPU shell materials containing amido group in γ position and the high surface area per unit mass of nanofibers. Thus, the CLSMPU-PySMPU core shell nanofibers can be used as both shape memory nanomaterials and antibacterial nanomaterials.

  11. Engineered magnetic core shell nanoprobes:Synthesis and applications to cancer imaging and therapeutics

    Institute of Scientific and Technical Information of China (English)

    Samir Mandal; Keya Chaudhuri

    2016-01-01

    Magnetic core shell nanoparticles are composed of a highly magnetic core material surrounded by a thin shell of desired drug, polymer or metal oxide. These magnetic core shell nanoparticles have a wide range of applications in biomedical research, more specifically in tissue imaging, drug delivery and therapeutics. The present review discusses the up-to-date knowledge on the various procedures for synthesis of magnetic core shell nanoparticles along with their applications in cancer imaging, drug delivery and hyperthermia or cancer therapeutics. Literature in this area shows that magnetic core shell nanoparticle-based imaging, drug targeting and therapy through hyperthermia can potentially be a powerful tool for the advanced diagnosis and treatment of various cancers.

  12. Prevalence of anisotropic shell growth in rare earth core-shell upconversion nanocrystals.

    Science.gov (United States)

    Zhang, Chao; Lee, Jim Yang

    2013-05-28

    Through a series of carefully executed experiments, we discovered the prevalence of anisotropic shell growth in many upconversion NaREF4 systems caused by a combination of factors: selective adsorption of ligands on the core surface due to the core crystal structure, ligand etching, and the lattice mismatch between core and shell components. This could lead to incomplete shell formation in core-shell nanocrystals under certain conditions. Shell growth is always faster in the a and b crystallographic directions than in the c direction. In the case of a larger lattice mismatch between the core and shell, shell growth only occurs in the a and b directions resulting in an oblong core-shell structure. These findings are useful for rationalizing shell-dependent emission properties, understanding the emission mechanisms in complex core-shell nanostructures, and for creating accurate models of core-shell designs for multifunctionality and optimal performance in applications.

  13. Engineered magnetic core shell nanoprobes: Synthesis and applications to cancer imaging and therapeutics.

    Science.gov (United States)

    Mandal, Samir; Chaudhuri, Keya

    2016-02-26

    Magnetic core shell nanoparticles are composed of a highly magnetic core material surrounded by a thin shell of desired drug, polymer or metal oxide. These magnetic core shell nanoparticles have a wide range of applications in biomedical research, more specifically in tissue imaging, drug delivery and therapeutics. The present review discusses the up-to-date knowledge on the various procedures for synthesis of magnetic core shell nanoparticles along with their applications in cancer imaging, drug delivery and hyperthermia or cancer therapeutics. Literature in this area shows that magnetic core shell nanoparticle-based imaging, drug targeting and therapy through hyperthermia can potentially be a powerful tool for the advanced diagnosis and treatment of various cancers.

  14. Synthesis of nickel catalyzed Si/SiC core-shell nanowires by HWCVD

    Science.gov (United States)

    Tong Goh, Boon; Abdul Rahman, Saadah

    2014-12-01

    Si/SiC core-shell nanowires grown on glass substrates by hot-wire chemical vapor deposition were studied. Nickel was used as a catalyst to initiate the growth of these core-shell nanowires and the nanowires were grown at different deposition pressures of 0.5 and 1 mbar. The core of the nanowire was found to be a single crystalline Si. The shell of the nanowire consisted of Si nano-crystallites embedded within an amorphous SiC matrix which was attributed to a radial growth of columnar structures. The Si and SiC nano-crystallites embedded within an amorphous matrix exhibited room-temperature photoluminescence emissions in the range of 400 nm-1 μm. A vapor-solid-solid growth mechanism of these core-shell nanowires is proposed. The effects of the deposition pressure on the properties of the core-shell nanowires are also discussed.

  15. Tuning light concentration inside plasmonic core-shell nanoparticles during laser irradiation

    Science.gov (United States)

    Astafyeva, L. G.; Pustovalov, V. K.; Fritzsche, W.

    2017-09-01

    Computer modeling was carried out of the intensity distributions of optical (laser) radiation with wavelengths in the range of 180-540 nm concentrated inside spherical two-layered core-shell nanoparticles with the core radii in the range 10-30 nm and shell thicknesses range 5-40 nm during irradiation. Different metals and oxides are used for core and shell materials of nanoparticles. Novel effect of light localizing at the nanoscale inside spherical two-layered core-shell NPs has been established on the base of computer calculations in the frame of the theory of diffraction of electromagnetic radiation on multilayer sphere. Light intensity concentrates in shadow hemisphere of core-shell NPs for the selected values of nanoparticle sizes and radiation wavelengths. These results can be applied in nanophotonics for construction of novel plasmonic devices and photonic components, and for different applications of the core-shell nanoparticles.

  16. Synthesis and microwave characterization of Co-SiC core-shell powders by electroless plating

    Institute of Scientific and Technical Information of China (English)

    ZHANG Haijun; WU Xiangwei; JIA Quanli; JIA Xiaolin

    2006-01-01

    Co-SiC core-shell powders were prepared by electroless plating. Scanning electron microscopy (SEM) revealed that Co-SiC core-shell powders were of nearly sphere-like shape and were about 0.3 μm. X-ray powder diffraction (XRD)patterns showed that the cobalt powder was hexagonal crystallite. The complex dielectric constant and the complex permeability of Co-SiC core-shell powders-paraffin wax composite were measured by the rectangle waveguide method. It showed that the dielectric loss was less than 0.1 and the magnetic loss was about 0.2 in 8.2-12.4 GHz for prepared Co-SiC core-shell composite powders.

  17. Cr/alpha-Cr2O3 monodispersed spherical core-shell particles based solar absorbers

    CSIR Research Space (South Africa)

    Khamlich, S

    2011-07-01

    Full Text Available Monodispersed spherical core-shell particles of Cr/alpha-Cr2O3 cermet ACG coatings investigated within this contribution could be successfully employed in thermal converters. Their selectivity depends on their chemical, physical and structural...

  18. Establishing the Structural Integrity of Core-Shell Nanoparticles against Elemental Migration using Luminescent Lanthanide Probes.

    Science.gov (United States)

    Chen, Bing; Peng, Dengfeng; Chen, Xian; Qiao, Xvsheng; Fan, Xianping; Wang, Feng

    2015-10-19

    Core-shell structured nanoparticles are increasingly used to host luminescent lanthanide ions but the structural integrity of these nanoparticles still lacks sufficient understanding. Herein, we present a new approach to detect the diffusion of dopant ions in core-shell nanostructures using luminescent lanthanide probes whose emission profile and luminescence lifetime are sensitive to the chemical environment. We show that dopant ions in solution-synthesized core-shell nanoparticles are firmly confined in the designed locations. However, annealing at certain temperatures (greater than circa 350 °C) promotes diffusion of the dopant ions and leads to degradation of the integrity of the nanoparticles. These insights into core-shell nanostructures should enhance our ability to understand and use lanthanide-doped luminescent nanoparticles.

  19. Preparation and characterization of antibacterial Au/C core-shell composite

    Energy Technology Data Exchange (ETDEWEB)

    Gao Yanhong [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China); Centers for Disease Control and Prevention of Guangdong Province, Guangzhou 510300, Guangdong (China); Zhang Nianchun [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China); Zhong Yuwen [Centers for Disease Control and Prevention of Guangdong Province, Guangzhou 510300, Guangdong (China); Cai Huaihong [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China); Liu Yingliang, E-mail: tliuyl@jnu.edu.cn [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China)

    2010-09-01

    An environment-friendly oxidation-reduction method was used to prepare Au/C core-shell composite using carbon as core and gold as shell. The chemical structures and morphologies of Au/C core-shell composite and carbon sphere were characterized by X-ray diffraction, transmission electron microscope, energy dispersion X-ray spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS). The antibacterial properties of the Au/C core-shell composite against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Candida albicans (C. albicans) were examined by the disk diffusion assay and minimal inhibition concentration (MIC) methods. In addition, antibacterial ability of Au/C core-shell composite was observed by atomic force microscope. Results demonstrated that gold homogeneously supported on the surface of carbon spheres without aggregation and showed efficient antibacterial abilities.

  20. Plateau-Rayleigh Instability Morphology Evolution (PRIME): From Electrospun Core-Shell Polymer Fibers to Polymer Microbowls.

    Science.gov (United States)

    Chiu, Yu-Jing; Tseng, Hsiao-Fan; Lo, Yu-Ching; Wu, Bo-Hao; Chen, Jiun-Tai

    2017-03-01

    Electrospun core-shell fibers have great potentials in many areas, such as tissue engineering, drug delivery, and organic solar cells. Although many core-shell fibers have been prepared and studied, the morphology transformation of core-shell fibers have been rarely studied. In this work, the morphology evolution of electrospun core-shell polymer fibers driven by the Plateau-Rayleigh instability is investigated. Polystyrene/poly(methyl methacrylate) (PS/PMMA) core-shell fibers are first prepared by using blend solutions and a single axial electrospinning setup. After PS/PMMA core-shell fibers are annealed on a PS film, the fibers undulate and sink into the polymer film, forming core-shell hemispheres. The evolution process, which can be observed in situ by optical microscopy, is mainly driven by achieving lower surface and interfacial energies. The morphologies of the transformed structures can be confirmed by a selective removal technique, and polymer microbowls can be obtained.

  1. A comparative study of Pt and Pt-Pd core-shell nanocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Long, Nguyen Viet, E-mail: nguyenviet_long@yahoo.com [Department of Materials Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Posts and Telecommunications Institute of Technology, km 10 Nguyen Trai, Thanh Xuan, Ha Dong, Hanoi (Viet Nam); Laboratory for Nanotechnology, Vietnam National University, Ho Chi Minh, Linh Trung, Thu Duc, Ho Chi Minh (Viet Nam); Department of Molecular and Material Sciences, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 6-1 Kasugakouen, Kasuga, Fukuoka 816-8580 (Japan); Ohtaki, Michitaka [Department of Molecular and Material Sciences, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 6-1 Kasugakouen, Kasuga, Fukuoka 816-8580 (Japan); Hien, Tong Duy [Laboratory for Nanotechnology, Vietnam National University, Ho Chi Minh, Linh Trung, Thu Duc, Ho Chi Minh (Viet Nam); Randy, Jalem [Department of Materials Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Nogami, Masayuki, E-mail: nogami@nitech.ac.jp [Department of Materials Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan)

    2011-10-30

    Highlights: > The syntheses of Pt (4-8 nm) and Pt-Pd core-shell nanoparticles (15-25 nm) are showed. > Pt-Pd core-shell catalysts possess catalytic property much better than Pt catalysts. > Pt-Pd core-shell catalysts exhibit fast and highly stable catalytic activity. > Fascinatingly, size effect is not as really important as nanostructuring effect. > Fast, stable, sensitive hydrogen adsorption is very crucial for fuel cells. - Abstract: This comparative study characterizes two types of metallic and core-shell bimetallic nanoparticles prepared with our modified polyol method. These nanoparticles consist of Pt and Pt-Pd core-shell nanocatalysts exhibiting polyhedral morphologies. The controlled syntheses of Pt metallic nanoparticles in the 10-nm regime (4-8 nm) and Pt-Pd bimetallic core-shell nanoparticles in the 30-nm regime (15-25 nm) are presented. To realize our ultimate research goals for proton exchange membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs), we thoroughly investigate the dependence of the electrocatalytic properties of the nanoparticles on the structure, size and morphology. Significant differences in the electrocatalysis are also explained in experimental evidences of both Pt and Pt-Pd nanocatalysts. We suggested that the core-shell controlled morphologies and nanostructures of the Pd nanoshell as the Pd atomic monolayers will not only play an important role in producing inexpensive, novel Pt- and Pd-based nanocatalysts but also in designing more efficient Pt- and Pd-based nanocatalysts for practical use in DMFC technology. Our comparative results show that Pt-Pd nanocatalysts with Pd nanoshells exhibited much better electrocatalytic activity and stabilization compared to Pt nanocatalysts. Interestingly, we found that the size effect is not as strong as the nanostructuring effect on the catalytic properties of the researched nanoparticles. A nanostructure effect of the core-shell bimetallic nanoparticles was identified.

  2. Introduction of biotin or folic acid into polypyrrole magnetite core-shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Nan, Alexandrina; Turcu, Rodica [National Institute of Research and Development for Isotopic and Molecular Technologies, Donath 65-103, Cluj-Napoca (Romania); Liebscher, Jürgen [National Institute of Research and Development for Isotopic and Molecular Technologies, Donath 65-103, Cluj-Napoca, Romania and Institute of Chemistry, Humboldt-University Berlin, Brook-Taylor 2, D-12489 Berlin (Germany)

    2013-11-13

    In order to contribute to the trend in contemporary research to develop magnetic core shell nanoparticles with better properties (reduced toxicity, high colloidal and chemical stability, wide scope of application) in straightforward and reproducible methods new core shell magnetic nanoparticles were developed based on polypyrrole shells functionalized with biotin and folic acid. Magnetite nanoparticles stabilized by sebacic acid were used as magnetic cores. The morphology of magnetite was determined by transmission electron microscopy TEM, while the chemical structure investigated by FT-IR.

  3. Ultrathin polycrystalline hematite and goethite-hematite core-shell nanorods.

    Science.gov (United States)

    Cavaliere-Jaricot, S; Brioude, A; Miele, P

    2009-03-03

    We have developed a facile synthesis route to 1D structures of ultrathin polycrystalline hematite and goethite-hematite core-shells. One-dimensional structures of pure hematite and the goethite-hematite core-shell with very small diameters were synthesized in aqueous solution at low temperature with a simple, rapid method based on the oxidation of Fe3O4 nanoparticles without using surfactants.

  4. Synthesis and cytotoxicity study of magnesium ferrite-gold core-shell nanoparticles.

    Science.gov (United States)

    Nonkumwong, Jeeranan; Pakawanit, Phakkhananan; Wipatanawin, Angkana; Jantaratana, Pongsakorn; Ananta, Supon; Srisombat, Laongnuan

    2016-04-01

    In this work, the core-magnesium ferrite (MgFe2O4) nanoparticles were prepared by hydrothermal technique. Completed gold (Au) shell coating on the surfaces of MgFe2O4 nanoparticles was obtained by varying core/shell ratios via a reduction method. Phase identification, morphological evolution, optical properties, magnetic properties and cytotoxicity to mammalian cells of these MgFe2O4 core coated with Au nanoparticles were examined by using a combination of X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, UV-visible spectroscopy (UV-vis), vibrating sample magnetometry and resazurin microplate assay techniques. In general, TEM images revealed different sizes of the core-shell nanoparticles generated from various core/shell ratios and confirmed the completed Au shell coating on MgFe2O4 core nanoparticles via suitable core/shell ratio with particle size less than 100 nm. The core-shell nanoparticle size and the quality of coating influence the optical properties of the products. The UV-vis spectra of complete coated MgFe2O4-Au core-shell nanoparticles exhibit the absorption bands in the near-Infrared (NIR) region indicating high potential for therapeutic applications. Based on the magnetic property measurement, it was found that the obtained MgFe2O4-Au core-shell nanoparticles still exhibit superparamagnetism with lower saturation magnetization value, compared with MgFe2O4 core. Both of MgFe2O4 and MgFe2O4-Au core-shell also showed in vitro non-cytotoxicity to mouse areola fibroblast (L-929) cell line.

  5. Core-shell microparticles for protein sequestration and controlled release of a protein-laden core.

    Science.gov (United States)

    Rinker, Torri E; Philbrick, Brandon D; Temenoff, Johnna S

    2016-12-21

    Development of multifunctional biomaterials that sequester, isolate, and redeliver cell-secreted proteins at a specific timepoint may be required to achieve the level of temporal control needed to more fully regulate tissue regeneration and repair. In response, we fabricated core-shell heparin-poly(ethylene-glycol) (PEG) microparticles (MPs) with a degradable PEG-based shell that can temporally control delivery of protein-laden heparin MPs. Core-shell MPs were fabricated via a re-emulsification technique and the number of heparin MPs per PEG-based shell could be tuned by varying the mass of heparin MPs in the precursor PEG phase. When heparin MPs were loaded with bone morphogenetic protein-2 (BMP-2) and then encapsulated into core-shell MPs, degradable core-shell MPs initiated similar C2C12 cell alkaline phosphatase (ALP) activity as the soluble control, while non-degradable core-shell MPs initiated a significantly lower response (85+19% vs. 9.0+4.8% of the soluble control, respectively). Similarly, when degradable core-shell MPs were formed and then loaded with BMP-2, they induced a ∼7-fold higher C2C12 ALP activity than the soluble control. As C2C12 ALP activity was enhanced by BMP-2, these studies indicated that degradable core-shell MPs were able to deliver a bioactive, BMP-2-laden heparin MP core. Overall, these dynamic core-shell MPs have the potential to sequester, isolate, and then redeliver proteins attached to a heparin core to initiate a cell response, which could be of great benefit to tissue regeneration applications requiring tight temporal control over protein presentation.

  6. Cu-Ag core-shell nanoparticles with enhanced oxidation stability for printed electronics.

    Science.gov (United States)

    Lee, Changsoo; Kim, Na Rae; Koo, Jahyun; Lee, Yung Jong; Lee, Hyuck Mo

    2015-11-13

    In this work, we synthesized uniform Cu-Ag core-shell nanoparticles using a facile two-step process that consists of thermal decomposition and galvanic displacement methods. The core-shell structure of these nanoparticles was confirmed through characterization using transmission electron microscopy, energy-dispersive spectroscopy, and x-ray diffraction. Furthermore, we investigated the oxidation stability of the Cu-Ag core-shell nanoparticles in detail. Both qualitative and quantitative x-ray photoelectron spectroscopy analyses confirm that the Cu-Ag core-shell nanoparticles have considerably higher oxidation stability than Cu nanoparticles. Finally, we formulated a conductive ink using the synthesized nanoparticles and coated it onto glass substrates. Following the sintering process, we compared the resistivity of the Cu-Ag core-shell nanoparticles with that of the Cu nanoparticles. The results of this study clearly show that the Cu-Ag core-shell nanoparticles can potentially be used as an alternative to Ag nanoparticles because of their superior oxidation stability and electrical properties.

  7. Synthesis, structural, optical and photocatalytic properties of CdS/ZnS core/shell nanoparticles

    Science.gov (United States)

    Reddy, Ch. Venkata; Shim, Jaesool; Cho, Migyung

    2017-04-01

    CdS, ZnS and CdS/ZnS core/shell nanoparticles were successfully synthesized via two-step synthesis method. The as-prepared CdS, ZnS and CdS/ZnS core/shell nanoparticles were used to study the structural, morphological, and optical properties by PXRD, TEM, HRTEM, UV-vis spectroscopy, N2 adsorption-desorption, FT-IR, PL and Raman spectroscopy measurements. The XRD pattern confirms the crystal structure of the prepared ZnS, CdS, and CdS/ZnS core/shell nanoparticles. The crystallinity of the as-prepared samples is confirmed by PXRD, TEM and HRTEM analysis. The BET analysis showed that the CdS/ZnS core/shell nanoparticles had larger surface area and pore diameter than CdS and ZnS. The Raman and FT-IR spectra confirm the fundamental vibrational modes of CdS and ZnS respectively. Compared to pure CdS and ZnS, CdS/ZnS core/shell nanoparticles exhibited higher photocatalytic activity for the degradation of methyl orange (MO). The enhancement of photocatalytic activity in the CdS/ZnS core/shell nanoparticles is due to the interface actions between CdS and ZnS, which greatly reduces the recombination of photogenerated electrons-holes pair. The proposed mechanism for degradation of MO dye is discussed in detail.

  8. Large-area super-resolution optical imaging by using core-shell microfibers

    Science.gov (United States)

    Liu, Cheng-Yang; Lo, Wei-Chieh

    2017-09-01

    We first numerically and experimentally report large-area super-resolution optical imaging achieved by using core-shell microfibers. The particular spatial electromagnetic waves for different core-shell microfibers are studied by using finite-difference time-domain and ray tracing calculations. The focusing properties of photonic nanojets are evaluated in terms of intensity profile and full width at half-maximum along propagation and transversal directions. In experiment, the general optical fiber is chemically etched down to 6 μm diameter and coated with different metallic thin films by using glancing angle deposition. The direct imaging of photonic nanojets for different core-shell microfibers is performed with a scanning optical microscope system. We show that the intensity distribution of a photonic nanojet is highly related to the metallic shell due to the surface plasmon polaritons. Furthermore, large-area super-resolution optical imaging is performed by using different core-shell microfibers placed over the nano-scale grating with 150 nm line width. The core-shell microfiber-assisted imaging is achieved with super-resolution and hundreds of times the field-of-view in contrast to microspheres. The possible applications of these core-shell optical microfibers include real-time large-area micro-fluidics and nano-structure inspections.

  9. Fabrication and characteristics of spindle Fe2O3@Au core/shell particles

    Institute of Scientific and Technical Information of China (English)

    SHEN Hong-xia; YAO Jian-lin; GU Ren-ao

    2009-01-01

    The fabrication and characteristics of spindle Fe2O3@Au core/shell particle were investigated, and the effect of the core/shell nanoparticles as the surface enhanced Raman spectroscopy (SERS)-active substrates was studied. By using the seed-catalyzed reduction technique, anisotropic Fe2O3@Au core/shell particles with spindle morphology were successfully prepared. The Fe2O3 particles with spindle morphology were initially prepared as original cores. The Au nanoparticles of 2 nm were attached onto the Fe2O3 particles through organosilane molecules. Uniform Au shell formed onto Fe2O3 core modified by Au nanoparticles through the in-situ reduction of HAuCl4. The shell thickness was controlled through regulating the concentration of HAuCl4 solution. The results of TEM, XRD and UV-vis characterization show that the core/shell particles with the original shape of the Fe2O3 particles are obtained and these surfaces are covered by Au shell completely. The surface enhanced Raman spectrum of the probe molecules adsorbed on these core/shell substrates is strong and the intensity is enhanced with the increase of the thickness of Au shell or the aspect ratio of particles. The spindle Fe2O3@Au core/shell particles exhibit optimum (SERS) activity.

  10. Core-shell microspheres with porous nanostructured shells for liquid chromatography.

    Science.gov (United States)

    Ahmed, Adham; Skinley, Kevin; Herodotou, Stephanie; Zhang, Haifei

    2017-10-10

    The development of new stationary phase has been the key aspect for fast and efficient high-performance liquid chromatography separation with relatively low backpressure. Core-shell particles, with a solid core and porous shell, have been extensively investigated and commercially manufactured in the last decade. The excellent performance of core-shell particles columns has been recorded for a wide range of analytes, covering small and large molecules, neutral and ionic (acidic and basic), biomolecules, and metabolites. In this review, we firstly introduce the advance and advantages of core-shell particles (or more widely known as superficially porous particles) against non-porous particles and fully porous particles. This is followed by the detailed description of various methods used to fabricate core-shell particles. We then discuss the applications of common silica core-shell particles (mostly commercially manufactured), spheres-on-sphere particles, and core-shell particles with a non-silica shell. This review concludes with a summary and perspective on the development of stationary phase materials for high-performance liquid chromatography applications. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  11. Cu-Ag core-shell nanoparticles with enhanced oxidation stability for printed electronics

    Science.gov (United States)

    Lee, Changsoo; Kim, Na Rae; Koo, Jahyun; Jong Lee, Yung; Lee, Hyuck Mo

    2015-11-01

    In this work, we synthesized uniform Cu-Ag core-shell nanoparticles using a facile two-step process that consists of thermal decomposition and galvanic displacement methods. The core-shell structure of these nanoparticles was confirmed through characterization using transmission electron microscopy, energy-dispersive spectroscopy, and x-ray diffraction. Furthermore, we investigated the oxidation stability of the Cu-Ag core-shell nanoparticles in detail. Both qualitative and quantitative x-ray photoelectron spectroscopy analyses confirm that the Cu-Ag core-shell nanoparticles have considerably higher oxidation stability than Cu nanoparticles. Finally, we formulated a conductive ink using the synthesized nanoparticles and coated it onto glass substrates. Following the sintering process, we compared the resistivity of the Cu-Ag core-shell nanoparticles with that of the Cu nanoparticles. The results of this study clearly show that the Cu-Ag core-shell nanoparticles can potentially be used as an alternative to Ag nanoparticles because of their superior oxidation stability and electrical properties.

  12. Magnetic core-shell nanoparticles for drug delivery by nebulization

    Directory of Open Access Journals (Sweden)

    Verma Navin Kumar

    2013-01-01

    Full Text Available Abstract Background Aerosolized therapeutics hold great potential for effective treatment of various diseases including lung cancer. In this context, there is an urgent need to develop novel nanocarriers suitable for drug delivery by nebulization. To address this need, we synthesized and characterized a biocompatible drug delivery vehicle following surface coating of Fe3O4 magnetic nanoparticles (MNPs with a polymer poly(lactic-co-glycolic acid (PLGA. The polymeric shell of these engineered nanoparticles was loaded with a potential anti-cancer drug quercetin and their suitability for targeting lung cancer cells via nebulization was evaluated. Results Average particle size of the developed MNPs and PLGA-MNPs as measured by electron microscopy was 9.6 and 53.2 nm, whereas their hydrodynamic swelling as determined using dynamic light scattering was 54.3 nm and 293.4 nm respectively. Utilizing a series of standardized biological tests incorporating a cell-based automated image acquisition and analysis procedure in combination with real-time impedance sensing, we confirmed that the developed MNP-based nanocarrier system was biocompatible, as no cytotoxicity was observed when up to 100 μg/ml PLGA-MNP was applied to the cultured human lung epithelial cells. Moreover, the PLGA-MNP preparation was well-tolerated in vivo in mice when applied intranasally as measured by glutathione and IL-6 secretion assays after 1, 4, or 7 days post-treatment. To imitate aerosol formation for drug delivery to the lungs, we applied quercitin loaded PLGA-MNPs to the human lung carcinoma cell line A549 following a single round of nebulization. The drug-loaded PLGA-MNPs significantly reduced the number of viable A549 cells, which was comparable when applied either by nebulization or by direct pipetting. Conclusion We have developed a magnetic core-shell nanoparticle-based nanocarrier system and evaluated the feasibility of its drug delivery capability via aerosol

  13. Magnetic core-shell nanoparticles for drug delivery by nebulization

    LENUS (Irish Health Repository)

    Verma, Navin Kumar

    2013-01-23

    AbstractBackgroundAerosolized therapeutics hold great potential for effective treatment of various diseases including lung cancer. In this context, there is an urgent need to develop novel nanocarriers suitable for drug delivery by nebulization. To address this need, we synthesized and characterized a biocompatible drug delivery vehicle following surface coating of Fe3O4 magnetic nanoparticles (MNPs) with a polymer poly(lactic-co-glycolic acid) (PLGA). The polymeric shell of these engineered nanoparticles was loaded with a potential anti-cancer drug quercetin and their suitability for targeting lung cancer cells via nebulization was evaluated.ResultsAverage particle size of the developed MNPs and PLGA-MNPs as measured by electron microscopy was 9.6 and 53.2 nm, whereas their hydrodynamic swelling as determined using dynamic light scattering was 54.3 nm and 293.4 nm respectively. Utilizing a series of standardized biological tests incorporating a cell-based automated image acquisition and analysis procedure in combination with real-time impedance sensing, we confirmed that the developed MNP-based nanocarrier system was biocompatible, as no cytotoxicity was observed when up to 100 mug\\/ml PLGA-MNP was applied to the cultured human lung epithelial cells. Moreover, the PLGA-MNP preparation was well-tolerated in vivo in mice when applied intranasally as measured by glutathione and IL-6 secretion assays after 1, 4, or 7 days post-treatment. To imitate aerosol formation for drug delivery to the lungs, we applied quercitin loaded PLGA-MNPs to the human lung carcinoma cell line A549 following a single round of nebulization. The drug-loaded PLGA-MNPs significantly reduced the number of viable A549 cells, which was comparable when applied either by nebulization or by direct pipetting.ConclusionWe have developed a magnetic core-shell nanoparticle-based nanocarrier system and evaluated the feasibility of its drug delivery capability via aerosol administration. This study has

  14. CSR in SMEs

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Jamali, Dima; Vives, Antonio

    2014-01-01

    Purpose -The aim of this article is to analyse the potential and limitations of donor-financed management tools that seek to promote CSR in small and medium-sized enterprises in developing countries. Drawing on key insights from three streams of literature relating to institutional theory, critical...... perspectives on CSR in developing countries, and the literature on CSR and SMEs in the developing world, we analyze the potential and limits of donor-financed management tools aimed at promoting CSR in developing country SMEs. Design/methodology/approach - Using official UN and OECD lists of all multilateral...... and bilateral donor agencies we identified 38 donors that might have produced such CSR tools. We contacted them via e-mail and/or telephone, and conductied an extensive internet search with the aim of identifying whether they had developed management tools aimed at promoting CSR in SMEs in developing countries...

  15. Three Tiers of CSR

    DEFF Research Database (Denmark)

    Aggerholm, Helle Kryger; Trapp, Leila

    2014-01-01

    Heightened concern with global issues has led to shifts in corporate social responsibility (CSR) programs. To capture the distinct nature of this global focus, researchers have developed a three-generation CSR typology. In this paper we first evaluate the usefulness of this typology...... for understanding corporate approaches to CSR by examining how several companies position themselves thematically in CEO introductions to sustainability reports. On the basis of this, we then evaluate the practical value of this typology for assisting those who work with CSR strategy. The analysis revealed...... expressions of all three CSR generations, with third generation thinking being apparent, but not dominant. It also verified that the three-generation CSR typology can be an instructive means of both evaluating as well as framing a company’s approach to sustainability, though with modifications. On the basis...

  16. Getting CSR communication fit

    DEFF Research Database (Denmark)

    Schmeltz, Line

    2017-01-01

    Companies experience increasing legal and societal pressure to communicate about their corporate social responsibility (CSR) engagements from a number of different publics. One very important group is that of young consumers who are predicted to be the most important and influential consumer group...... in the near future. From a value- theoretical base, this article empirically explores the role and applicability of ‘fit’ in strategic CSR communication targeted at young consumers. Point of departure is taken in the well-known strategic fit (a logical link between a company’s CSR commitment and its core...... values) and is further developed by introducing two additional fits, the CSR- Consumer fit and the CSR-Consumer-Company fit (Triple Fit). Through a sequential design, the three fits are empirically tested and their potential for meeting young consumers’ expectations for corporate CSR messaging...

  17. Enhanced antibacterial activity of bimetallic gold-silver core-shell nanoparticles at low silver concentration

    Science.gov (United States)

    Banerjee, Madhuchanda; Sharma, Shilpa; Chattopadhyay, Arun; Ghosh, Siddhartha Sankar

    2011-12-01

    Herein we report the development of bimetallic Au@Ag core-shell nanoparticles (NPs) where gold nanoparticles (Au NPs) served as the seeds for continuous deposition of silver atoms on its surface. The core-shell structure and morphology were examined by UV-Vis spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis and X-ray diffraction (XRD). The core-shell NPs showed antibacterial activity against both Gram negative (Escherichia coli and Pseudomonas aeruginosa) and Gram positive (Enterococcus faecalis and Pediococcus acidilactici) bacteria at low concentration of silver present in the shell, with more efficacy against Gram negative bacteria. TEM and flow cytometric studies showed that the core-shell NPs attached to the bacterial surface and caused membrane damage leading to cell death. The enhanced antibacterial properties of Au@Ag core-shell NPs was possibly due to the more active silver atoms in the shell surrounding gold core due to high surface free energy of the surface Ag atoms owing to shell thinness in the bimetallic NP structure.Herein we report the development of bimetallic Au@Ag core-shell nanoparticles (NPs) where gold nanoparticles (Au NPs) served as the seeds for continuous deposition of silver atoms on its surface. The core-shell structure and morphology were examined by UV-Vis spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis and X-ray diffraction (XRD). The core-shell NPs showed antibacterial activity against both Gram negative (Escherichia coli and Pseudomonas aeruginosa) and Gram positive (Enterococcus faecalis and Pediococcus acidilactici) bacteria at low concentration of silver present in the shell, with more efficacy against Gram negative bacteria. TEM and flow cytometric studies showed that the core-shell NPs attached to the bacterial surface and caused membrane damage leading to cell death. The enhanced antibacterial properties of Au@Ag core-shell NPs was

  18. Synthesis and cytotoxicity study of magnesium ferrite-gold core-shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Nonkumwong, Jeeranan [Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Pakawanit, Phakkhananan [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Wipatanawin, Angkana [Division of Biochemistry and Biochemical Technology, Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Jantaratana, Pongsakorn [Department of Physics, Faculty of Science, Kasetsart University, Bangkok 11900 (Thailand); Ananta, Supon [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Srisombat, Laongnuan, E-mail: slaongnuan@yahoo.com [Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand)

    2016-04-01

    In this work, the core-magnesium ferrite (MgFe{sub 2}O{sub 4}) nanoparticles were prepared by hydrothermal technique. Completed gold (Au) shell coating on the surfaces of MgFe{sub 2}O{sub 4} nanoparticles was obtained by varying core/shell ratios via a reduction method. Phase identification, morphological evolution, optical properties, magnetic properties and cytotoxicity to mammalian cells of these MgFe{sub 2}O{sub 4} core coated with Au nanoparticles were examined by using a combination of X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, UV–visible spectroscopy (UV–vis), vibrating sample magnetometry and resazurin microplate assay techniques. In general, TEM images revealed different sizes of the core-shell nanoparticles generated from various core/shell ratios and confirmed the completed Au shell coating on MgFe{sub 2}O{sub 4} core nanoparticles via suitable core/shell ratio with particle size less than 100 nm. The core-shell nanoparticle size and the quality of coating influence the optical properties of the products. The UV–vis spectra of complete coated MgFe{sub 2}O{sub 4}-Au core-shell nanoparticles exhibit the absorption bands in the near-Infrared (NIR) region indicating high potential for therapeutic applications. Based on the magnetic property measurement, it was found that the obtained MgFe{sub 2}O{sub 4}-Au core-shell nanoparticles still exhibit superparamagnetism with lower saturation magnetization value, compared with MgFe{sub 2}O{sub 4} core. Both of MgFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4}-Au core-shell also showed in vitro non-cytotoxicity to mouse areola fibroblast (L-929) cell line. - Highlights: • Synthesis of MgFe{sub 2}O{sub 4}-Au core-shell nanoparticles with particle size < 100 nm • Complete Au shell coating on the surfaces of MgFe{sub 2}O{sub 4} nanoparticles • In vitro cytotoxicity study of complete coated MgFe{sub 2}O{sub 4}-Au core-shell

  19. Communicating CSR is More Challenging than Paying CSR

    OpenAIRE

    Supriya Motwani

    2012-01-01

    In spite of the research on CSR being 50 years old, there is still no common definition of CSR. This field of study is not only theoretical & conceptually poor, but is also empirically unexplored. This is also true for CSR communication. CSR activities need to communicate because they may influence opinion leader’s behavior regarding a target organization. This potential for exploring CSR communication has lead us to develop a study that focuses on CSR communication practice & it’s challenges...

  20. Electrospinning fabrication and characterization of magnetic-upconversion fluorescent bifunctional core-shell nanofibers

    Science.gov (United States)

    Ma, Qianli; Wang, Jinxian; Dong, Xiangting; Yu, Wensheng; Liu, Guixia

    2014-02-01

    Novel magnetic-upconversion fluorescent bifunctional core-shell nanofibers have been successfully fabricated by coaxial electrospinning technology. NaYF4:Yb3+,Er3+ and Fe3O4 nanoparticles (Nps) were incorporated into polyvinylpyrrolidone (PVP) and electrospun into core-shell nanofibers with Fe3O4/PVP as core and NaYF4:Yb3+,Er3+/PVP as the shell. The morphology and properties of the final products were investigated in detail by X-ray diffractometry, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, and fluorescence spectroscopy. The core contained magnetic Nps was ca. 100 nm in diameter, and the shell scattered with NaYF4:Yb3+, Er3+ Nps was ca. 80 nm in thickness. Fluorescence emission peaks of Er3+ in the [Fe3O4/PVP]@[NaYF4:Yb3+,Er3+/PVP] core-shell nanofibers were observed. Compared with Fe3O4/NaYF4:Yb3+,Er3+/PVP composite nanofibers, the luminescent intensity of the [Fe3O4/PVP]@[NaYF4:Yb3+,Er3+/PVP] core-shell nanofibers was much higher, because the Fe3O4 Nps were only distributed in the core of the core-shell nanofibers, thus the manufactured core-shell nanofibers possessed excellent magnetic properties. The new type magnetic-upconversion fluorescent bifunctional [Fe3O4/PVP]@[NaYF4:Yb3+,Er3+/PVP] core-shell nanofibers have many potential applications in display device, nanorobots, protein determination, and target delivery of drug owing to their excellent magnetism and fluorescence.

  1. Synthesis of monodisperse TiO2-paraffin core-shell nanoparticles for improved dielectric properties.

    Science.gov (United States)

    Balasubramanian, Balamurugan; Kraemer, Kristin L; Reding, Nicholas A; Skomski, Ralph; Ducharme, Stephen; Sellmyer, David J

    2010-04-27

    Core-shell structures of oxide nanoparticles having a high dielectric constant, and organic shells with large breakdown field are attractive candidates for large electrical energy storage applications. A high growth temperature, however, is required to obtain the dielectric oxide nanoparticles, which affects the process of core-shell formation and also leads to poor control of size, shape, and size-distribution. In this communication, we report a new synthetic process to grow core-shell nanoparticles by means of an experimental method that can be easily adapted to synthesize core-shell structures from a variety of inorganic-organic or inorganic-inorganic materials. Monodisperse and spherical TiO2 nanoparticles were produced at room temperature as a collimated cluster beam in the gas phase using a cluster-deposition source and subsequently coated with uniform paraffin nanoshells using in situ thermal evaporation, prior to deposition on substrates for further characterization and device processing. The paraffin nanoshells prevent the TiO2 nanoparticles from contacting each other and also act as a matrix in which the volume fraction of TiO2 nanoparticles was varied by controlling the thickness of the nanoshells. Parallel-plate capacitors were fabricated using dielectric core-shell nanoparticles having different shell thicknesses. With respect to the bulk paraffin, the effective dielectric constant of TiO2-paraffin core-shell nanoparticles is greatly enhanced with a decrease in the shell thickness. The capacitors show a minimum dielectric dispersion and low dielectric losses in the frequency range of 100 Hz-1 MHz, which are highly desirable for exploiting these core-shell nanoparticles for potential applications.

  2. In vitro hyperthermia with improved colloidal stability and enhanced SAR of magnetic core/shell nanostructures.

    Science.gov (United States)

    Patil, R M; Thorat, N D; Shete, P B; Otari, S V; Tiwale, B M; Pawar, S H

    2016-02-01

    Magnetic core/shell nanostructures of Fe3O4 nanoparticles coated with oleic acid and betaine-HCl were studied for their possible use in magnetic fluid hyperthermia (MFH). Their colloidal stability and heat induction ability were studied in different media viz. phosphate buffer solution (PBS), saline solution and glucose solution with different physiological conditions and in human serum. The results showed enhanced colloidal stability in these media owing to their high zeta potential values. Heat induction studies showed that specific absorption rates (SAR) of core/shells were 82-94W/g at different pH of PBS and concentrations of NaCl and glucose. Interestingly, core/shells showed 78.45±3.90W/g SAR in human serum. The cytotoxicity of core/shells done on L929 and HeLa cell lines using 3-(4,5-dimethylthiazol-2-yl)2,5-diphenyl tetrazolium bromide and trypan blue dye exclusion assays showed >89% and >80% cell viability for 24 and 48h respectively. Core/shell structures were also found to be very efficient for in vitro MFH on cancer cell line. About 95% cell death was occurred in 90min after hyperthermia treatment. The mechanism of cell death was found to be elevated ROS generation in cells after exposure to core/shells in external magnetic field. This study showed that these core/shells have a great potential to be used in in vivo MFH. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Core-shell column Tanaka characterization and additional tests using active pharmaceutical ingredients.

    Science.gov (United States)

    Ludvigsson, Jufang Wu; Karlsson, Anders; Kjellberg, Viktor

    2016-12-01

    In the last decade, core-shell particles have gained more and more attention in fast liquid chromatography separations due to their comparable performance with fully porous sub-2 μm particles and their significantly lower back pressure. Core-shell particles are made of a solid core surrounded by a shell of classic fully porous material. To embrace the developed core-shell column market and use these columns in pharmaceutical analytical applications, 17 core-shell C18 columns purchased from various vendors with various dimensions (50 mm × 2.1 mm to 100 mm × 3 mm) and particle sizes (1.6-2.7 μm) were characterized using Tanaka test protocols. Furthermore, four selected active pharmaceutical ingredients were chosen as test probes to investigate the batch to batch reproducibility for core-shell columns of particle size 2.6-2.7 μm, with dimension of 100 × 3 mm and columns of particle size 1.6 μm, with dimension 100 × 2.1 mm under isocratic elution. Columns of particle size 2.6-2.7 μm were also tested under gradient elution conditions. To confirm the claimed comparable efficiency of 2.6 μm core-shell particles as sub-2 μm fully porous particles, column performances of the selected core-shell columns were compared with BEH C18 , 1.7 μm, a fully porous column material as well.

  4. Polymer-virus core-shell structures prepared via co-assembly and template synthesis methods

    Institute of Scientific and Technical Information of China (English)

    SUTHIWANGCHAROEN; Nisaraporn; PREVELIGE; Peter; E.Jr

    2010-01-01

    Bionanoparticles(BNPs),consisting of virus and virus-like assemblies,have attracted much attention in the biomedical field for their applications such as imaging and targeted drug delivery,owing to their well-defined structures and well-controlled chemistries.BNPs-based core-shell structures provide a unique system for the investigation of biological interactions such as protein-protein and protein-carbohydrate interactions.However,it is still a challenge to prepare the BNPs-based core-shell structures.Herein,we describe(i) co-assembly method and(ii) template synthesis method in the development of polymer-BNPs core-shell structures.These two methods can be divided into three different systems.In system A,different polymers including poly(2-vinylpyridine)(P2VP),poly(4-vinylpyridine)(P4VP) and poly(ε-caprolactone)-block-poly(2-vinylpyridine)(PCL-b-P2VP) can form a raspberry-like structure with BNPs.In system B,polystyrene(PS) spheres end capped with free amine and BNPs can form a core-shell structure.In System C,layer-by-layer(LBL) method is used to prepare positive charged PS particles,which can be used as a template to form the core-shell structures with BNPs.These two methods may open a new way for preparing novel protein-based functional materials for potential applications in the biomedical field.

  5. Dielectric core-shell optical antennas for strong solar absorption enhancement.

    Science.gov (United States)

    Yu, Yiling; Ferry, Vivian E; Alivisatos, A Paul; Cao, Linyou

    2012-07-11

    We demonstrate a new light trapping technique that exploits dielectric core-shell optical antennas to strongly enhance solar absorption. This approach can allow the thickness of active materials in solar cells lowered by almost 1 order of magnitude without scarifying solar absorption capability. For example, it can enable a 70 nm thick hydrogenated amorphous silicon (a-Si:H) thin film to absorb 90% of incident solar radiation above the bandgap, which would otherwise require a thickness of 400 nm in typical antireflective coated thin films. This strong enhancement arises from a controlled optical antenna effect in patterned core-shell nanostructures that consist of absorbing semiconductors and nonabsorbing dielectric materials. This core-shell optical antenna benefits from a multiplication of enhancements contributed by leaky mode resonances (LMRs) in the semiconductor part and antireflection effects in the dielectric part. We investigate the fundamental mechanism for this enhancement multiplication and demonstrate that the size ratio of the semiconductor and the dielectric parts in the core-shell structure is key for optimizing the enhancement. By enabling strong solar absorption enhancement, this approach holds promise for cost reduction and efficiency improvement of solar conversion devices, including solar cells and solar-to-fuel systems. It can generally apply to a wide range of inorganic and organic active materials. This dielectric core-shell antenna can also find applications in other photonic devices such as photodetectors, sensors, and solid-state lighting diodes.

  6. Sensitive detection of DNA based on the optical properties of core-shell gold nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Huang Haowen, E-mail: hhwn09@163.com; Li Chunhui; Qu Caiting; Huang Shaowen; Liu Fang; Zeng Yunlong [Hunan University of Science and Technology, Laboratory of Theoretical Chemistry and Molecular Simulation of Ministry of Education, School of Chemistry and Chemical Engineering (China)

    2012-03-15

    In this article, a type of core-shell nanostructure, Au{sub 2}S/AuAgS/Ag{sub 3}AuS{sub 2}-coated gold nanorods (GNRs) with unique optical properties was used as a sensing platform to detect fish sperm DNA (fsDNA). The prepared core-shell nanorods are positively charged due to the adsorption of the positively charged cetyltrimethylammonium bromide (CTAB) cations on their surface. fsDNA can form ternary fsDNA-CTAB-nanorod complexes together with CTAB and nanorod, which provides a useful platform to detect fsDNA through absorption spectra and resonance light scattering (RLS) spectroscopy. In this sensitive core-shell nanorod sensor, CTAB concentration and the nanoparticle dosage play important roles and have been investigated. Moreover, the fsDNA-CTAB-nanorod complexes induce a great enhancement of RLS intensity of the core-shell GNRs and directly proportional to the concentration of fsDNA, reaching a detection limit of about 10{sup -9} mg/mL. This study will be significant for as-prepared core-shell GNRs for future application in biological systems.

  7. Preparation and characterization of core/shell particles with siloxane in the shell

    Energy Technology Data Exchange (ETDEWEB)

    Liu Bailing [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China)]. E-mail: blliuchem@hotmail.com; Deng Xiaobo [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China); Cao Shunsheng [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China); Li Songjun [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China); Luo Rong [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China)

    2006-01-15

    The core/shell particles consisting of polystyrene core and 3-(methacryloxypropyl)-trimethoxysilane (MPS) shell were prepared in the present study by successive seeding polymerization under kinetically controlled conditions and were characterized by particle size analyser, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The TEM image indicated that the particles containing organic siloxane presented an evident core/shell structure. Additionally, the study of XPS also revealed that MPS could be grafted onto the surface of polystyrene microspheres and the atomic ratio of C/Si on the surface of the core/shell particles (MPS-40) was very close to the ratio of C/Si in the molecule of MPS. The surface properties of the films produced from the core/shell particles were also investigated by the static contact angle method. Compared with the homopolymer of PS, the core/shell particles were more effective to create hydrophobic surface, so, the introduction of MPS was capable of obvious increase in water repellency.

  8. Mapping the Atomistic Structure of Graded Core/Shell Colloidal Nanocrystals.

    Science.gov (United States)

    Yarema, Maksym; Xing, Yunhua; Lechner, Rainer T; Ludescher, Lukas; Dordevic, Nikola; Lin, Weyde M M; Yarema, Olesya; Wood, Vanessa

    2017-09-15

    Engineering the compositional gradient for core/shell semiconductor nanocrystals improves their optical properties. To date, however, the structure of graded core/shell nanocrystal emitters has only been qualitatively described. In this paper, we demonstrate an approach to quantify nanocrystal structure, selecting graded Ag-In-Se/ZnSe core/shell nanocrystals as a proof-of-concept material. A combination of multi-energy small-angle X-ray scattering and electron microscopy techniques enables us to establish the radial distribution of ZnSe with sub-nanometer resolution. Using ab initio shape-retrieval analysis of X-ray scattering spectra, we further determine the average shape of nanocrystals. These results allow us to generate three-dimensional, atomistic reconstructions of graded core/shell nanocrystals. We use these reconstructions to calculate solid-state Zn diffusion in the Ag-In-Se nanocrystals and the lattice mismatch between nanocrystal monolayers. Finally, we apply these findings to propose design rules for optimal shell structure and record-luminescent core/shell nanocrystals.

  9. Synthesis and Characterization of Cobalt-Carbon Core-Shell Microspheres in Supercritical Carbon Dioxide System

    Institute of Scientific and Technical Information of China (English)

    Jun-song Yang; Qian-wang Chen

    2008-01-01

    The synthesis of cobalt-carbon core-shell microspheres in supercritical carbon dioxide system was investigated. Cobalt-carbon core-shell microspheres with diameter of about 1μm were prepared at 350℃ for 12 h in a closed vessel containing an appropriate amount of bis(cyclopentadienyl)cobalt powder and dry ice.Characterization by a variety of techniques,including X-ray powder diffraction,X-ray photoelectron spectroscopy,Transmission electron microscope,Fourier transform infrared spectrum and Raman spectroscopy analysis reveals that each cobalt-carbon core-shell microsphere is made up of an amorphous cobalt core with diameter less than 1 μm and an amorphous carbon shell with thickness of about 200 nm.The possible growth mechanism of cobalt-carbon core-shell microspheres is discussed,based on the pyrolysis of bis(cyclopentadienyl)cobalt in supercritical carbon dioxide and the deposition of carbon or carbon clusters with odd electrons on the surface of magnetic cobalt cores due to magnetic attraction.Magnetic measurements show 141.41 emu/g of saturation magnetization of a typical sample,which is lower than the 168 emu/g of the corresponding metal cobalt bulk material.This is attributed to the considerable mass of the carbon shell and amorphous nature of the magnetic core.Control of magnetism in the cobalt-carbon core-shell microspheres was achieved by annealing treatments.

  10. Core-shell nanofibers: Integrating the bioactivity of gelatin and the mechanical property of polyvinyl alcohol.

    Science.gov (United States)

    Merkle, Valerie M; Zeng, Like; Slepian, Marvin J; Wu, Xiaoyi

    2014-04-01

    Coaxial electrospinning is used to fabricate nanofibers with gelatin in the shell and polyvinyl alcohol (PVA) in the core in order to derive mechanical strength from PVA and bioactivity from gelatin. At a 1:1 PVA/gelatin mass ratio, the core-shell nanofiber scaffolds display a Young's modulus of 168.6 ± 36.5 MPa and a tensile strength of 5.42 ± 1.95 MPa, which are significantly higher than those of the scaffolds composed solely of gelatin or PVA. The Young's modulus and tensile strength of the core-shell nanofibers are further improved by reducing the PVA/gelatin mass ratio from 1:1 to 1:3. The mechanical analysis of the core-shell nanofibers suggests that the presence of the gelatin shell may improve the molecular alignment of the PVA core, transforming the semi-crystalline, plastic PVA into a more crystallized, elastic PVA, and enhancing the mechanical properties of the core. Lastly, the PVA/gelatin core-shell nanofibers possess cellular viability, proliferation, and adhesion similar to these of the gelatin nanofibers, and show significantly higher proliferation and adhesion than the PVA nanofibers. Taken together, the coaxial electrospinning of nanofibers with a core-shell structure permits integration of the bioactivity of gelatin and the mechanical strength of PVA in single fibers.

  11. Controllable core-shell-type resin for solid-phase peptide synthesis.

    Science.gov (United States)

    Cho, Hong-Jun; Lee, Tae-Kyung; Kim, Jung Won; Lee, Sang-Myung; Lee, Yoon-Sik

    2012-10-19

    A simple, mild, and inexpensive biphasic functionalization approach is attempted for preparing an ideal core-shell-type resin. The core-shell-type architecture was constructed by coupling Fmoc-OSu to the amino groups on the shell layer of an aminomethyl polystyrene (AM PS) resin. The shell layer thickness of the resin could be easily controlled under mild conditions, which was characterized by confocal laser scanning microscopy (CLSM). The efficiency of core-shell-type resin for solid-phase peptide synthesis (SPPS) was demonstrated by the synthesis of various peptides and compared with commercially available noncore-shell-type resins such as AM PS and poly(ethylene glycol)-based resins. The core-shell-type resin provided effective performance during the synthesis of hydrophobic peptide sequences, a disulfide-bridged cyclic peptide, and a difficult PNA sequence. Furthermore, a highly aggregative peptide fragment, MoPrP 105-125, was synthesized more efficiently on the core-shell-type resin under microwave conditions than AM PS and ChemMatrix resins.

  12. Hypersonic vibrations of Ag@SiO2 (cubic core)-shell nanospheres.

    Science.gov (United States)

    Sun, Jing Ya; Wang, Zhi Kui; Lim, Hock Siah; Ng, Ser Choon; Kuok, Meng Hau; Tran, Toan Trong; Lu, Xianmao

    2010-12-28

    The intriguing optical and catalytic properties of metal-silica core-shell nanoparticles, inherited from their plasmonic metallic cores together with the rich surface chemistry and increased stability offered by their silica shells, have enabled a wide variety of applications. In this work, we investigate the confined vibrational modes of a series of monodisperse Ag@SiO(2) (cubic core)-shell nanospheres synthesized using a modified Stöber sol-gel method. The particle-size dependence of their mode frequencies has been mapped by Brillouin light scattering, a powerful tool for probing hypersonic vibrations. Unlike the larger particles, the observed spheroidal-like mode frequencies of the smaller ones do not scale with inverse diameter. Interestingly, the onset of the deviation from this linearity occurs at a smaller particle size for higher-energy modes than for lower-energy ones. Finite element simulations show that the mode displacement profiles of the Ag@SiO(2) core-shells closely resemble those of a homogeneous SiO(2) sphere. Simulations have also been performed to ascertain the effects that the core shape and the relative hardness of the core and shell materials have on the vibrations of the core-shell as a whole. As the vibrational modes of a particle have a bearing on its thermal and mechanical properties, the findings would be of value in designing core-shell nanostructures with customized thermal and mechanical characteristics.

  13. Doxorubicin/gold-loaded core/shell nanoparticles for combination therapy to treat cancer through the enhanced tumor targeting.

    Science.gov (United States)

    Kim, Kyungim; Oh, Keun Sang; Park, Dal Yong; Lee, Jae Young; Lee, Beom Suk; Kim, In San; Kim, Kwangmeyung; Kwon, Ick Chan; Sang, Yoon Kim; Yuk, Soon Hong

    2016-04-28

    A combination therapy consisting of radiotherapy and chemotherapy is performed using the core/shell nanoparticles (NPs) containing gold NPs and doxorubicin (DOX). Gold NPs in the core/shell NPs were utilized as a radiosensitizer. To examine the morphology and size distribution of the core/shell NPs, transmittance electron microscopy and dynamic light scattering were used. The in vitro release behavior, cellular uptake and toxicity were also observed to verify the functionality of the core/shell NPs as a nanocarrier. To demonstrate the advantage of the core/shell NPs over traditional gold NPs reported in the combination therapy, we evaluated the accumulation behavior of the core/shell NPs at the tumor site using the biodistribution. Antitumor efficacy was observed with and without radiation to evaluate the role of gold NPs as a radiosensitizer.

  14. Can CSR be controlled?

    DEFF Research Database (Denmark)

    Kampf, Constance

    2009-01-01

    Associate Professor Constance Kampf talks about whether companies can control CSR or not, and she talks about the possible implications it can have if companies fail to live up their responsibilties. In that sense companies needs to consider the impact of the internet. She also gives advice on how...... to incorporate CSR in to the daily workflow....

  15. CSR as Imperialism

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Khan, Farzad Rafi

    2011-01-01

    the interpretations given to Western-based CSR initiatives by local manufacturers. Data from two qualitative research projects on CSR initiatives in the soccer ball industry of Sialkot, Pakistan, are utilized to explore this issue in an inductive and exploratory manner. The article suggests that many soccer ball...

  16. CSR in Afghanistan

    DEFF Research Database (Denmark)

    Azizi, Sameer; Jamali, Dima

    2016-01-01

    Purpose: – The purpose of this paper is to explain the emergence of CSR in Afghanistan as a novel context in the South-Asian CSR debate. Design/methodology/approach: – The findings of the paper are based on case studies of four corporations in the Afghan mobile telecommunications industry. Multiple...... space for manoeuvring for non-state actors to play a pivotal role in business-society relations. The paper highlights that the CSR practices are driven by the multi-level organisational field that through a unique blend of global coercive, mimetic and normative pressures lead to convergence around...... explicit CSR themes. Research limitations/implications: – The findings are based on CSR practices that are explicitly stated and do not include informal and/or implicit business-society practices in such contexts. Originality/value: – This paper combines the literature on areas of limited statehood...

  17. High performance carbon nanotube-Si core-shell wires with a rationally structured core for lithium ion battery anodes.

    Science.gov (United States)

    Fan, Yu; Zhang, Qing; Lu, Congxiang; Xiao, Qizhen; Wang, Xinghui; Tay, Beng Kang

    2013-02-21

    Core-shell Si nanowires are very promising anode materials. Here, we synthesize vertically aligned carbon nanotubes (CNTs) with relatively large diameters and large inter-wire spacing as core wires and demonstrate a CNT-Si core-shell wire composite as a lithium ion battery (LIB) anode. Owing to the rationally engineered core structure, the composite shows good capacity retention and rate performance. The excellent performance is superior to most core-shell nanowires previously reported.

  18. Conceptions of CSR in Japan

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    2014-01-01

    The objective of this paper is to advance an analysis of different conceptions of CSR in Japan after the Fukushima accident. The literature on CSR suggests that CSR is a complex term that has been open to a variety of interpretations. Until recently, CSR was mainly incorporated into Japanese...... concerns have raised crucial questions about environmental issues with regards to CSR. How do Japanese companies incorporate environmental issues into their CSR aims and achievements? What is the next strategic challenge for CSR in Japan? This paper will analyze the conceptualization of CSR in TEPCO...... used to understand CSR and the strategic challenges for CSR in Japan. Such a conceptual analysis provides important insight into how Japanese companies conceive of environmental issues and incorporate these into their CSR aims and achievements. As such, this paper will argue, part of the next strategic...

  19. Preparation and mechanism of Fe3O4/Au core/shell super-paramagnetic microspheres

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In the presence of Fe3O4 nano-particles, a new type of super-paramagnetic Fe3O4/Au microspheres with core/shell structures was prepared by reduction of Au3+ with hydroxylamine. The formation mechanism of the core/shell microspheres was studied in some detail. It was shown that the formation of the complex microspheres can be divided into two periods, that is, surface reaction-controlled process and diffusion-controlled process. The relative time lasted by either process depends upon the amount of Fe3O4 added and the initial concentration of Au3+. XPS analysis revealed that along with increasing in coating amount, the strength of the characteristic peaks of Au increased, and the Auger peaks of Fe weakened and even disappeared. Size distribution analysis showed that the core/shell microspheres are of an average diameter of 180 nm, a little bit larger than those before coating.

  20. Electronic Properties of Strained Si/Ge Core-Shell Nanowires

    CERN Document Server

    Peng, Xihong

    2010-01-01

    We investigated the electronic properties of strained Si/Ge core-shell nanowires along the [110] direction using first principles calculations based on density-functional theory. The diameter of the studied core-shell wire is up to 5 nm. We found the band gap of the core-shell wire is smaller than that of both pure Si and Ge wires with the same diameter. This reduced band gap is ascribed to the intrinsic strain between Ge and Si layers, which partially counters the quantum confinement effect. The external strain is further applied to the nanowires for tuning the band structure and band gap. By applying sufficient tensile strain, we found the band gap of Si-core/Ge-shell nanowire with diameter larger than ~3 nm experiences a transition from direct to indirect gap.

  1. Electrosprayed core-shell polymer-lipid nanoparticles for active component delivery

    Science.gov (United States)

    Eltayeb, Megdi; Stride, Eleanor; Edirisinghe, Mohan

    2013-11-01

    A key challenge in the production of multicomponent nanoparticles for healthcare applications is obtaining reproducible monodisperse nanoparticles with the minimum number of preparation steps. This paper focus on the use of electrohydrodynamic (EHD) techniques to produce core-shell polymer-lipid structures with a narrow size distribution in a single step process. These nanoparticles are composed of a hydrophilic core for active component encapsulation and a lipid shell. It was found that core-shell nanoparticles with a tunable size range between 30 and 90 nm and a narrow size distribution could be reproducibly manufactured. The results indicate that the lipid component (stearic acid) stabilizes the nanoparticles against collapse and aggregation and improves entrapment of active components, in this case vanillin, ethylmaltol and maltol. The overall structure of the nanoparticles produced was examined by multiple methods, including transmission electron microscopy and differential scanning calorimetry, to confirm that they were of core-shell form.

  2. Sonochemical synthesis and photoluminescence properties of rare-earth phosphate core/shell nanorods

    Institute of Scientific and Technical Information of China (English)

    余文媛; 李冠涞; 周利

    2010-01-01

    Rare earth phosphate core/shell nanostructures were synthesized via facile ultrasound irradiation method.XRD and TEM were em-ployed to characterize the structure and morphology properties.The photoluminescence(PL) properties of TbPO4/CePO4 and CePO4/TbPO4 core/shell nanorods were studied to explore the energy transfers from Ce3+ to Tb3+.In the Ce0.9Tb0.1PO4/LaPO4 core/shell nanorods,the PL intensity of Ce0.9Tb0.1PO4 nanorods was enhanced when the LaPO4 shells were coated.

  3. Thermosensitive Cu2O-PNIPAM core-shell nanoreactors with tunable photocatalytic activity

    CERN Document Server

    Jia, He; Angioletti-Uberti, Stefano; Henzler, Katja; Ott, Andreas; Lin, Xianzhong; Möser, Jannik; Kochovski, Zdravko; Schnegg, Alexander; Dzubiella, Joachim; Ballauff, Matthias; Lu, Yan

    2016-01-01

    We report a facile and novel method for the fabrication of Cu2O@PNIPAM core-shell nanoreactors using Cu2O nanocubes as the core. The PNIPAM shell not only effectively protects the Cu2O nanocubes from oxidation, but also improves the colloidal stability of the system. The Cu2O@PNIPAM core-shell microgels can work efficiently as photocatalyst for the decomposition of methyl orange under visible light. A significant enhancement in the catalytic activity has been observed for the core-shell microgels compared with the pure Cu2O nanocubes. Most importantly, the photocatalytic activity of the Cu2O nanocubes can be further tuned by the thermosensitive PNIPAM shell, as rationalized by our recent theory.

  4. Core-Shell Structure of a Silicon Nanorod/Carbon Nanotube Field Emission Cathode

    Directory of Open Access Journals (Sweden)

    Bohr-Ran Huang

    2012-01-01

    Full Text Available A novel core-shell structure of silicon nanorods/carbon nanotubes (SiNRs/CNTs is developed for use in field emission cathodes. The CNTs were synthesized on SiNRs, using the Ag-assisted electroless etching technique to form the SiNRs/CNT core-shell structure. This resulting SiNRs/CNT field emission cathode demonstrated improved field emission properties including a lower turn-on electric field on (1.3 V/μm, 1 μA/cm2, a lower threshold electric field th (1.8 V/μm, 1 mA/cm2, and a higher enhancement factor (2347. These superior properties indicate that this core-shell structure of SiNRs/CNTs has good potential in field emission cathode applications.

  5. Boosting hole mobility in coherently strained [110]-oriented Ge-Si core-shell nanowires.

    Science.gov (United States)

    Conesa-Boj, Sonia; Li, Ang; Koelling, Sebastian; Brauns, Matthias; Ridderbos, Joost; Nguyen, Ton T; Verheijen, Marcel A; Koenraad, Paul M; Zwanenburg, Floris Arnoud; Bakkers, Erik P A M

    2017-02-23

    The ability of core-shell nanowires to overcome existing limitations of heterostructures is one of the key ingredients for the design of next generation devices. This requires a detailed understanding of the mechanism for strain relaxation in these systems, in order to eliminate strain-induced defect formation and thus to boost important electronic properties such as carrier mobility. Here we demonstrate how the hole mobility of [110]-oriented Ge-Si core-shell nanowires can be substantially enhanced thanks to the realization of large band offset and coherent strain in the system, reaching values as high as 4200 cm(2)/(Vs) at 4K and 1600 cm(2)/(Vs) at room temperature for high hole densities of 1019 cm(-3). Our results imply [110]-oriented Ge-Si core-shell nanowires as a promising candidate for future electronic and quantum transport devices.

  6. Fabrication of polyacrylate core-shell nanoparticles via spray drying method

    Science.gov (United States)

    Chen, Pengpeng; Cheng, Zenghui; Chu, Fuxiang; Xu, Yuzhi; Wang, Chunpeng

    2016-05-01

    Fine polyacrylate particles are thought to be environmental plastisols for car industry. However, these particles are mainly dried through demulsification of the latexes, which is not reproducible and hard to be scaled up. In this work, a spray drying method had been applied to the plastisols-used acrylate latex. By adjusting the core/shell ratio, spray drying process of the latex was fully studied. Scanning electronic microscopy observation of the nanoparticles before and after spray drying indicated that the core-shell structures could be well preserved and particles were well separated by spray drying if the shell was thick enough. Otherwise, the particles fused into each other and core-shell structures were destroyed. Polyacrylate plastisols were developed using diisononylphthalate as a plasticizer, and plastigels were obtained after heat treatment of the sols. Results showed that the shell thickness also had a great influence on the storage stability of the plastisols and mechanical properties of the plastigels.

  7. Synthesis of core-shell structured magnetic nanoparticles with a carbide shell

    Science.gov (United States)

    Hou, Shushan; Chi, Yue; Zhao, Zhankui

    2017-03-01

    Core-shell structured materials combining the functionalities of the core and shell have great application potential in many fields. In this work, by combining solvothermal, polymerization and the high temperature carbonization, we have successfully developed a facile method to generate core-shell structured nanoparticles which possess an internal magnetic nanoparticle with a carbide shell. The thickness of resorcinol formaldehyde resin as intermediate transition shell could be easily adjusted by changing the concentration of the RF precursor. The resulting nanoparticles possess well-defined structure, uniform size and high magnetization. The unique nanostructure of the magnetic core-shell structured nanoparticles could lead to many promising applications in areas ranging from drug delivery to the purifyication of sewage.

  8. Hexagonal Boron Nitride-Graphene Core-Shell Arrays Formed by Self-Symmetrical Etching Growth.

    Science.gov (United States)

    Wang, Chenxiao; Zuo, Junlai; Tan, Lifang; Zeng, Mengqi; Zhang, Qiqi; Xia, Huinan; Zhang, Wenhao; Fu, Yingshuang; Fu, Lei

    2017-09-20

    The synthesis and integration of core-shell materials have been extensively explored in three-dimensional nanostructures, while they are hardly ever extended into the emerging two-dimensional (2D) research field. Herein, demonstrated by graphene (G) and hexagonal boron nitride (h-BN) and via a sequential chemical vapor deposition method, we succeed for the first time in synthesizing 2D h-BN-G core-shell arrays (CSA), which possess extremely high uniformity in shapes, sizes and distributions. Each of the core-shell unit is composed of G ring-shaped shell internally filled with h-BN circular core. In addition, we perform simulations to further explain the self-symmetrical etching growth mechanism of the h-BN-G CSA, demonstrating its potential to be used as an efficient synthetic method suitable for other 2D CSA systems.

  9. Core-shell hybrid nanostructured delivery platforms for advanced RNAi therapeutics.

    Science.gov (United States)

    Sajeesh, S; Choe, Jeong Yong; Lee, Dong Ki

    2017-09-04

    Study was aimed at combining the advantages of nonclassical RNAi-triggering oligonucleotides with nanoparticle-based advanced delivery platforms for developing efficient therapeutic systems. We utilized a core-shell hybrid nanostructured platform for effectively delivering nonclassical RNAi triggers, namely long double stranded interfering RNA and tripodal interfering RNA. Core-shell structure was prepared by stably anchoring thiol-modified cationic polymer on the surface of growing crystal gold (Au) seeds, and the resulting particles were further complexed with nonclassical RNAi candidates via electrostatic interactions. Our studies clearly demonstrated that the unique combination of nonclassical RNAi structures with an advanced core-shell hybrid nanostructured platform is an effective module for advanced RNAi-based therapeutic development.

  10. Magnetocaloric effect study of ferromagnetic-charge ordered core-shell type manganite nanostructures

    Science.gov (United States)

    Das, Kalipada; Das, I.

    2017-08-01

    In the present study we have presented the magnetic and magnetocaloric properties of ferromagnetic (La0.67Sr0.33MnO3)-charge ordered (Pr0.67Ca0.33MnO3) core-shell nanostructures. We have also compared the magnetocaloric properties of Pr0.67Ca0.33MnO3 (PCMO) nanoparticles. Our study indicates that in case of the core-shell nanostructures, the magnetocaloric properties markedly modifies compared to its parent compound PCMO, additionally the low field magnetocaloric effect enhanced. More specifically, the large value of magnetocaloric entropy change (- Δ S(T)) was observed in wider temperature range in core-shell nanostructure which may be important from application point of view.

  11. Hierarchical magnetic core-shell nanostructures for microwave absorption:Synthesis,microstructure and property studies

    Institute of Scientific and Technical Information of China (English)

    LIU JiWei; XU JunJie; LIU ZhengWang; LIU XiaLin; CHE RenChao

    2014-01-01

    Core-shell nanostructures have attracted considerable attention in the past decades because of their fundamental scientific significance and many technological applications.Recently,it has been reported that the core-shell nanostructures with advanced compositions and complicated morphologies show great potential as high-performance microwave absorbers due to their unique properties,such as large surface areas,multi-functionalities and synergistic effects between the interior core and outer shell.This review article focuses on the recent progress in synthesis and characterization of hierarchical magnetic core-shell nanostructures for microwave absorption applications based on our own work.In addition,several future trends in this field for next-generation microwave absorbers are discussed.

  12. Polymer-inorganic core-shell nanofibers by electrospinning and atomic layer deposition: flexible nylon-ZnO core-shell nanofiber mats and their photocatalytic activity.

    Science.gov (United States)

    Kayaci, Fatma; Ozgit-Akgun, Cagla; Donmez, Inci; Biyikli, Necmi; Uyar, Tamer

    2012-11-01

    Polymer-inorganic core-shell nanofibers were produced by two-step approach; electrospinning and atomic layer deposition (ALD). First, nylon 6,6 (polymeric core) nanofibers were obtained by electrospinning, and then zinc oxide (ZnO) (inorganic shell) with precise thickness control was deposited onto electrospun nylon 6,6 nanofibers using ALD technique. The bead-free and uniform nylon 6,6 nanofibers having different average fiber diameters (∼80, ∼240 and ∼650 nm) were achieved by using two different solvent systems and polymer concentrations. ZnO layer about 90 nm, having uniform thickness around the fiber structure, was successfully deposited onto the nylon 6,6 nanofibers. Because of the low deposition temperature utilized (200 °C), ALD process did not deform the polymeric fiber structure, and highly conformal ZnO layer with precise thickness and composition over a large scale were accomplished regardless of the differences in fiber diameters. ZnO shell layer was found to have a polycrystalline nature with hexagonal wurtzite structure. The core-shell nylon 6,6-ZnO nanofiber mats were flexible because of the polymeric core component. Photocatalytic activity of the core-shell nylon 6,6-ZnO nanofiber mats were tested by following the photocatalytic decomposition of rhodamine-B dye. The nylon 6,6-ZnO nanofiber mat, having thinner fiber diameter, has shown better photocatalytic efficiency due to higher surface area of this sample. These nylon 6,6-ZnO nanofiber mats have also shown structural stability and kept their photocatalytic activity for the second cycle test. Our findings suggest that core-shell nylon 6,6-ZnO nanofiber mat can be a very good candidate as a filter material for water purification and organic waste treatment because of their photocatalytic properties along with structural flexibility and stability.

  13. Sub-nanometer dimensions control of core/shell nanoparticles prepared by atomic layer deposition.

    Science.gov (United States)

    Weber, M J; Verheijen, M A; Bol, A A; Kessels, W M M

    2015-03-06

    Bimetallic core/shell nanoparticles (NPs) are the subject of intense research due to their unique electronic, optical and catalytic properties. Accurate and independent control over the dimensions of both core and shell would allow for unprecedented catalytic performance. Here, we demonstrate that both core and shell dimensions of Pd/Pt core/shell nanoparticles (NPs) supported on Al2O3 substrates can be controlled at the sub-nanometer level by using a novel strategy based on atomic layer deposition (ALD). From the results it is derived that the main conditions for accurate dimension control of these core/shell NPs are: (i) a difference in surface energy between the deposited core metal and the substrate to obtain island growth; (ii) a process yielding linear growth of the NP cores with ALD cycles to obtain monodispersed NPs with a narrow size distribution; (iii) a selective ALD process for the shell metal yielding a linearly increasing thickness to obtain controllable shell growth exclusively on the cores. For Pd/Pt core/shell NPs it is found that a minimum core diameter of 1 nm exists above which the NP cores are able to catalytically dissociate the precursor molecules for shell growth. In addition, initial studies on the stability of these core/shell NPs have been carried out, and it has been demonstrated that core/shell NPs can be deposited by ALD on high aspect ratio substrates such as nanowire arrays. These achievements show therefore that ALD has significant potential for the preparation of tuneable heterogeneous catalyst systems.

  14. Heterogeneous core/shell fluoride nanocrystals with enhanced upconversion photoluminescence for in vivo bioimaging

    Science.gov (United States)

    Hao, Shuwei; Yang, Liming; Qiu, Hailong; Fan, Rongwei; Yang, Chunhui; Chen, Guanying

    2015-06-01

    We report on heterogeneous core/shell CaF2:Yb3+/Ho3+@NaGdF4 nanocrystals of 17 nm with efficient upconversion (UC) photoluminescence (PL) for in vivo bioimaging. Monodisperse core/shell nanostructures were synthesized using a seed-mediated growth process involving two quite different approaches of liquid-solid-solution and thermal decomposition. They exhibit green emission with a sharp band around 540 nm when excited at ~980 nm, which is about 39 times brighter than the core CaF2:Yb3+/Ho3+ nanoparticles. PL decays at 540 nm revealed that such an enhancement arises from efficient suppression of surface-related deactivation from the core nanocrystals. In vivo bioimaging employing water-dispersed core/shell nanoparticles displayed high contrast against the background.We report on heterogeneous core/shell CaF2:Yb3+/Ho3+@NaGdF4 nanocrystals of 17 nm with efficient upconversion (UC) photoluminescence (PL) for in vivo bioimaging. Monodisperse core/shell nanostructures were synthesized using a seed-mediated growth process involving two quite different approaches of liquid-solid-solution and thermal decomposition. They exhibit green emission with a sharp band around 540 nm when excited at ~980 nm, which is about 39 times brighter than the core CaF2:Yb3+/Ho3+ nanoparticles. PL decays at 540 nm revealed that such an enhancement arises from efficient suppression of surface-related deactivation from the core nanocrystals. In vivo bioimaging employing water-dispersed core/shell nanoparticles displayed high contrast against the background. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr02287h

  15. Core-shell silk hydrogels with spatially tuned conformations as drug-delivery system.

    Science.gov (United States)

    Yan, Le-Ping; Oliveira, Joaquim M; Oliveira, Ana L; Reis, Rui L

    2016-12-05

    Hydrogels of spatially controlled physicochemical properties are appealing platforms for tissue engineering and drug delivery. In this study, core-shell silk fibroin (SF) hydrogels of spatially controlled conformation were developed. The core-shell structure in the hydrogels was formed by means of soaking the preformed (enzymatically crosslinked) random coil SF hydrogels in methanol. When increasing the methanol treatment time from 1 to 10 min, the thickness of the shell layer can be tuned from about 200 to about 850 μm as measured in wet status. After lyophilization of the rehydrated core-shell hydrogels, the shell layer displayed compact morphology and the core layer presented porous structure, when observed by scanning electron microscopy. The conformation of the hydrogels was evaluated by Fourier transform infrared spectroscopy in wet status. The results revealed that the shell layer possessed dominant β-sheet conformation and the core layer maintained mainly random coil conformation. Enzymatic degradation data showed that the shell layers presented superior stability to the core layer. The mechanical analysis displayed that the compressive modulus of the core-shell hydrogels ranged from about 25 kPa to about 1.1 MPa by increasing the immersion time in methanol. When incorporated with albumin, the core-shell SF hydrogels demonstrated slower and more controllable release profiles compared with the non-treated hydrogel. These core-shell SF hydrogels of highly tuned properties are useful systems as drug-delivery system and may be applied as cartilage substitute. Copyright © 2016 John Wiley & Sons, Ltd.

  16. Formation of core-shell structured complex microparticles during fabrication of magnetorheological elastomers and their magnetorheological behavior

    Science.gov (United States)

    Wang, Yonghong; Zhang, Xinru; Chung, Kyungho; Liu, Chengcen; Choi, Seung-Bok; Choi, Hyoung Jin

    2016-11-01

    To improve mechanical and magnetorheological properties of magnetorheological elastomers (MREs), a facile method was used to fabricate high-performance MREs which consisted of the core-shell complex microparticles with an organic-inorganic network structure dispersed in an ethylene propylene diene rubber. In this work, the proposed magnetic complex microparticles were in situ formed during MREs fabrication as a result of strong interaction between matrix and CIPs using carbon black as a connecting point. The morphology of both isotropic (i-MREs) and anisotropic MREs (a-MREs) was observed by scanning electron microscope (SEM). The effects of carbonyl iron particle (CIP) volume content on mechanical properties and hysteresis loss of MREs were investigated. The effects of CIP volume content on the shear storage modulus, MR effect and loss tangent were studied using a modified dynamic mechanical analyzer under applied magnetic field strengths. The results showed that the orientation effect became more pronounced with increasing CIPs in the a-MREs, whereas CIPs distributed uniformly in the i-MREs. The tensile strength, tear strength and elongation at break decreased with increasing CIP content up to 40 vol.%, while the hardness increased. It is worth noting that the tensile strength of i-MREs and a-MREs containing 40 vol.% CIPs still had high mechanical properties as a result of good compatibility between complex microparticles and rubber matrix. The MR performance of shear storage modulus and damping properties of MREs increased remarkably with CIP content due to strong dipole-dipole interaction of complex microparticles. Besides, the hysteresis loss increased with increasing CIP content as a result of magnetic field induced interfacial sliding between complex microparticles.

  17. Symplectic Symmetry and the Ab Initio No-Core Shell Model

    Energy Technology Data Exchange (ETDEWEB)

    Draayer, Jerry P.; Dytrych, Tomas; Sviratcheva, Kristina D.; Bahri, Chairul; /Louisiana State U.; Vary, James P.; /Iowa State U. /LLNL, Livermore /SLAC

    2007-03-14

    The symplectic symmetry of eigenstates for the 0{sub gs}{sup +} in {sup 16}O and the 0{sub gs}{sup +} and lowest 2{sup +} and 4{sup +} configurations of {sup 12}C that are well-converged within the framework of the no-core shell model with the JISP16 realistic interaction is examined. These states are found to project at the 85-90% level onto very few symplectic representations including the most deformed configuration, which confirms the importance of a symplectic no-core shell model and reaffirms the relevance of the Elliott SU(3) model upon which the symplectic scheme is built.

  18. Synthesis of SnS/In2S3 core-shell nanoparticles

    Science.gov (United States)

    Prastani, C.; Nanu, M.; Nanu, D.; Schropp, R. E. I.; Rath, J. K.

    2014-09-01

    In this letter a new type of core-shell structure is presented. The core is made of tin-sulfide by colloidal route. The shell, made of indium-sulfide, by chemical bath deposition. These core-shell nanoparticles have been characterized by transmission electron microscope to study the size and the shape. High resolution TEM has allowed to determine the structure of the core and the shell. The chemical composition has been analyzed by energy-dispersive X-ray spectroscopy. In the end the optical absorption investigated by UV-vis changing the deposition time and temperature. Finally, the influence of these parameters on the band gap has been investigated.

  19. Structural and magnetic properties of core-shell iron-iron oxide nanoparticles

    DEFF Research Database (Denmark)

    Kuhn, Luise Theil; Bojesen, A.; Timmermann, L.

    2002-01-01

    We present studies of the structural and magnetic properties of core-shell iron-iron oxide nanoparticles. alpha-Fe nanoparticles were fabricated by sputtering and subsequently covered with a protective nanocrystalline oxide shell consisting of either maghaemite (gamma-Fe2O3) or partially oxidized...... magnetite (Fe3O4). We observed that the nanoparticles were stable against further oxidation, and Mossbauer spectroscopy at high applied magnetic fields and low temperatures revealed a stable form of partly oxidized magnetite. The nanocrystalline structure of the oxide shell results in strong canting...... of the spin structure in the oxide shell, which thereby modifies the magnetic properties of the core-shell nanoparticles....

  20. Preparation of Hollow Spherical and Core/shell Structured Powders by Plasma Processing

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Xiaofeng; ZHOU; Kesong; DENG; Changguang; SONG; Jinbing; ZHANG; Jifu; DONG; Shujuan

    2015-01-01

    Four types of hollow spherical micro- and nano-szied powders of ZrO2-7wt.%Y2O3(7YSZ), ZrO2-7wt.%Y2O3, Al2O3-13 wt.% TiO2(AT) and WC as well as one type of core/shell structured powder of ZrB2-30 wt.%Mo Si2 were prepared via plasma processing. In addition, the formation mechanisms of hollow spherical and core/shell structured powders prepared via plasma processing were also proposed.

  1. Quantum confinement effect in Si/Ge core-shell nanowires: First-principles calculations

    Science.gov (United States)

    Yang, Li; Musin, Ryza N.; Wang, Xiao-Qian; Chou, M. Y.

    2008-05-01

    The electronic structure of Si/Ge core-shell nanowires along the [110] and [111] directions are studied with first-principles calculations. We identify the near-gap electronic states that are spatially separated within the core or the shell region, making it possible for a dopant to generate carriers in a different region. The confinement energies of these core and shell states provide an operational definition of the “band offset,” which is not only size dependent but also component dependent. The optimal doping strategy in Si/Ge core-shell nanowires is proposed based on these energy results.

  2. Nonlinear photonic diode behavior in energy-graded core-shell quantum well semiconductor rod.

    Science.gov (United States)

    Ko, Suk-Min; Gong, Su-Hyun; Cho, Yong-Hoon

    2014-09-10

    Future technologies require faster data transfer and processing with lower loss. A photonic diode could be an attractive alternative to the present Si-based electronic diode for rapid optical signal processing and communication. Here, we report highly asymmetric photonic diode behavior with low scattering loss, from tapered core-shell quantum well semiconductor rods that were fabricated to have a large gradient in their bandgap energy along their growth direction. Local laser illumination of the core-shell quantum well rods yielded a huge contrast in light output intensities from opposite ends of the rod.

  3. Recent advances in the synthesis of Fe3O4@AU core/shell nanoparticles

    Science.gov (United States)

    Salihov, Sergei V.; Ivanenkov, Yan A.; Krechetov, Sergei P.; Veselov, Mark S.; Sviridenkova, Natalia V.; Savchenko, Alexander G.; Klyachko, Natalya L.; Golovin, Yury I.; Chufarova, Nina V.; Beloglazkina, Elena K.; Majouga, Alexander G.

    2015-11-01

    Fe3O4@Au core/shell nanoparticles have unique magnetic and optical properties. These nanoparticles are used for biomedical applications, such as magnetic resonance imaging, photothermal therapy, controlled drug delivery, protein separation, biosensors, DNA detection, and immunosensors. In this review, recent methods for the synthesis of core/shell nanoparticles are discussed. We divided all of the synthetic methods in two groups: methods of synthesis of bi-layer structures and methods of synthesis of multilayer composite structures. The latter methods have a layer of "glue" material between the core and the shell.

  4. Magnetic properties of Ni/Au core/shell studied by Monte Carlo simulations

    Energy Technology Data Exchange (ETDEWEB)

    Masrour, R., E-mail: rachidmasrour@hotmail.com [Laboratory of Materials, Processes, Environment and Quality, Cady Ayyed University, National School of Applied Sciences, Sidi Bouzid, Safi, 63 4600 (Morocco); LMPHE (URAC 12), Faculté des Sciences, Université Mohammed V-Agdal, Av. Ibn Batouta, B.P. 1014, Rabat (Morocco); Bahmad, L. [LMPHE (URAC 12), Faculté des Sciences, Université Mohammed V-Agdal, Av. Ibn Batouta, B.P. 1014, Rabat (Morocco); Hamedoun, M. [Institute of Nanomaterials and Nanotechnologies, MAScIR, Rabat (Morocco); Benyoussef, A. [LMPHE (URAC 12), Faculté des Sciences, Université Mohammed V-Agdal, Av. Ibn Batouta, B.P. 1014, Rabat (Morocco); Institute of Nanomaterials and Nanotechnologies, MAScIR, Rabat (Morocco); Hassan II Academy of Science and Technology, Rabat (Morocco); Hlil, E.K. [Institut Néel, CNRS et Université Joseph Fourier, BP 166, F-38042 Grenoble cedex 9 (France)

    2014-01-10

    The magnetic properties of ferromagnetic Ni/Au core/shell have been studied using Monte Carlo simulations within the Ising model framework. The considered Hamiltonian includes the exchange interactions between Ni–Ni, Au–Au and Ni–Au and the external magnetic field. The thermal total magnetizations and total magnetic susceptibilities of core/shell Ni/Au are computed. The critical temperature is deduced. The exchange interaction between Ni and Au atoms is obtained. In addition, the total magnetizations versus the external magnetic field and crystal filed for different temperature are also established.

  5. Graded index and randomly oriented core-shell silicon nanowires for broadband and wide angle antireflection

    Directory of Open Access Journals (Sweden)

    P. Pignalosa

    2011-09-01

    Full Text Available Antireflection with broadband and wide angle properties is important for a wide range of applications on photovoltaic cells and display. The SiOx shell layer provides a natural antireflection from air to the Si core absorption layer. In this work, we have demonstrated the random core-shell silicon nanowires with both broadband (from 400nm to 900nm and wide angle (from normal incidence to 60º antireflection characteristics within AM1.5 solar spectrum. The graded index structure from the randomly oriented core-shell (Air/SiOx/Si nanowires may provide a potential avenue to realize a broadband and wide angle antireflection layer.

  6. Si/PEDOT:PSS core/shell nanowire arrays for efficient hybrid solar cells.

    Science.gov (United States)

    Lu, Wenhui; Wang, Chengwei; Yue, Wei; Chen, Liwei

    2011-09-01

    A solution filling and drying method has been demonstrated to fabricate Si/PEDOT:PSS core/shell nanowire arrays for hybrid solar cells. The hybrid core/shell nanowire arrays show excellent broadband anti-reflection, and resulting hybrid solar cells absorb about 88% of AM 1.5G photons in the 300-1100 nm range. The power conversion efficiency (PCE) of the hybrid solar cell reaches 6.35%, and is primarily limited by direct and indirect interfacial recombination of charge carriers.

  7. Synthesis, characterization and degradation behavior of admicelled polyacrylate-natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Pongpilaipruet, Angkana; Magaraphan, Rathanawan, E-mail: rathanawan.k@chula.ac.th

    2015-06-15

    In order to improve weatherability of the cured natural rubber, the novel introduction of good ozone resistant polymers such as polyacrylates (poly(methyl acrylate) (PMA) or poly(methyl methacrylate) (PMMA)) into natural rubber (NR) by admicellar polymerization was investigated in this work. The admicellar polymerization to synthesize polyacrylate layer over the surface of NR latex particles was performed with varying monomer type (PMA and PMMA) and content (50 and 100 mM). The admicelled PMMA showed higher molecular weight than PMA. Fourier transform infrared spectra of the admicellar synthesized natural rubbers exhibited characteristic peaks of those polyacrylates. Micrographs from transmission electron and field emission scanning electron microscopes (FE-SEM) revealed the coatings of PMA and PMMA over the rubber particles, suggesting a core-shell structure. Thermogravimetric analysis revealed that the admicelled rubbers not only showed an improvement in heat stability but also a single decomposition temperature. After vulcanization, FE-SEM results showed the cured admicelled rubbers had phase transformation from core-shell to phase separation (aggregate domains of polyacrylate-rich phase) with smooth interface. This agreed well to their one glass transition temperature (∼−48 °C) which indicated good miscibility between NR and each polyacrylate. The cracks generated after exposure to ozone found in the admicelled rubbers were smaller than those in NR, suggesting better ozone resistance was achieved. Increasing monomer concentration led to less cracks or much better ozone resistance. Furthermore, changes in mechanical properties after ozone exposure of the admicelled PMA-NR were less than those of the admicelled PMMA-NR (having the same shell content) and the NR, respectively. - Highlights: • We use admicellar technique to add polyacrylates to NR in form of core-shell rubber. • This core-shell structure was physically formed as seen by the phase

  8. Governmentalities of CSR

    DEFF Research Database (Denmark)

    Vallentin, Steen

    2015-01-01

    This paper investigates the roles that Danish government has played in the development of corporate social responsibility (CSR). Denmark has emerged as a first mover among the Scandinavian countries when it comes to CSR. We argue that government has played a pivotal role in making this happen...... of practice and show how they subject CSR to different modes of rationalization and action. We conclude that the problem with public policy being split into three is not different as such, but the failure of each regime to recognize the value of the others. As a result, government tends to add...

  9. The ribonucleoprotein Csr network.

    Science.gov (United States)

    Seyll, Ethel; Van Melderen, Laurence

    2013-11-08

    Ribonucleoprotein complexes are essential regulatory components in bacteria. In this review, we focus on the carbon storage regulator (Csr) network, which is well conserved in the bacterial world. This regulatory network is composed of the CsrA master regulator, its targets and regulators. CsrA binds to mRNA targets and regulates translation either negatively or positively. Binding to small non-coding RNAs controls activity of this protein. Expression of these regulators is tightly regulated at the level of transcription and stability by various global regulators (RNAses, two-component systems, alarmone). We discuss the implications of these complex regulations in bacterial adaptation.

  10. CSR in SMEs

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Jamali, Dima; Vives, Antonio

    (Fox, 2005). In fact, when it comes to their role in promoting corporate social responsibility (CSR) in developing countries, the verdict is still out there in terms of the extent to which SMEs engage in CSR, and whether their CSR involvement makes any difference to the profitability of firms, workers......, and although they are sometimes portrayed as key vehicles in the struggle against poverty in Southern contexts, (Luetkenhorst 2004), there is still a critical lack of knowledge about to the extent to which these firms may contribute to achievement of broader objectives of sustainable and equitable development...

  11. Strategisk CSR i store virksomheder

    OpenAIRE

    Færch, Maya Lauridsen

    2013-01-01

    This thesis examines the institutionalization of strategic CSR in large corporations in Denmark. The study focuses on how strategic CSR has become a part of the overall legitimizing paradigms in the Danish society, and whether the use of strategic CSR results in isomorphic tendencies among large corporations in Denmark. Furthermore, it examines how large corporations institutionalize strategic CSR in regards to the integration of strategic CSR in operational activities and the embedment of st...

  12. Religiosity, CSR attitudes, and CSR behavior : An empirical study of executives’ religiosity and CSR

    NARCIS (Netherlands)

    Mazereeuw, C.; Graafland, J.J.; Kaptein, M.

    2014-01-01

    In this paper, we examine the relationship between Christian religiosity, attitudes towards corporate social responsibility (CSR), and CSR behavior of executives. We distinguish four types of CSR attitudes and five types of CSR behavior. Based on empirical research conducted among 473 Dutch executiv

  13. Religiosity, CSR attitudes, and CSR behavior : An empirical study of executives’ religiosity and CSR

    NARCIS (Netherlands)

    Mazereeuw, C.; Graafland, J.J.; Kaptein, M.

    2014-01-01

    In this paper, we examine the relationship between Christian religiosity, attitudes towards corporate social responsibility (CSR), and CSR behavior of executives. We distinguish four types of CSR attitudes and five types of CSR behavior. Based on empirical research conducted among 473 Dutch executiv

  14. Reporting consistently on CSR

    DEFF Research Database (Denmark)

    Thomsen, Christa; Nielsen, Anne Ellerup

    2006-01-01

    of a case study showing that companies use different and not necessarily consistent strategies for reporting on CSR. Finally, the implications for managerial practice are discussed. The chapter concludes by highlighting the value and awareness of the discourse and the discourse types adopted......This chapter first outlines theory and literature on CSR and Stakeholder Relations focusing on the different perspectives and the contextual and dynamic character of the CSR concept. CSR reporting challenges are discussed and a model of analysis is proposed. Next, our paper presents the results...... in the reporting material. By implementing consistent discourse strategies that interact according to a well-defined pattern or order, it is possible to communicate a strong social commitment on the one hand, and to take into consideration the expectations of the shareholders and the other stakeholders...

  15. CSR in Industrial Clusters

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Pillay, Renginee G.

    2012-01-01

    Purpose – The paper seeks to review the literature on CSR in industrial clusters in developing countries, identifying the main strengths, weaknesses, and gaps in this literature, pointing to future research directions and policy implications in the area of CSR and industrial cluster development...... in this field and their comments incorporated in the final version submitted to Corporate Governance. Findings – The article traces the origins of the debate on industrial clusters and CSR in developing countries back to the early 1990s when clusters began to be seen as an important vehicle for local economic...... development in the South. At the turn of the millennium the industrial cluster debate expanded as clusters were perceived as a potential source of poverty reduction, while their role in promoting CSR among small and medium-sized enterprises began to take shape from 2006 onwards. At present, there is still...

  16. CSR in SMEs

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Jamali, Dima; Vives, Antonio

    2014-01-01

    and bilateral donor agencies we identified 38 donors that might have produced such CSR tools. We contacted them via e-mail and/or telephone, and conductied an extensive internet search with the aim of identifying whether they had developed management tools aimed at promoting CSR in SMEs in developing countries...... of these tools to the context of larger firms in developed countries, with insufficient tailoring or customization to the specific realities of SMEs in the South. Research limitations/implications - In-depth interviews with aid agency personnel, SMEs, workers, or community members were not conducted. Hence, our...... study should be seen as an initial, exploratory desk study of the potential and limits of management tools aimed at promoting CSR in SMEs in the developing world. Practical implications - We suggest that donor agencies could develop such tools in a bottom-up fashion by first mapping the silent CSR...

  17. Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

    Directory of Open Access Journals (Sweden)

    Jingxin Zhu

    2016-03-01

    Full Text Available A nanofabrication method for the production of flexible core-shell structured silk elastin nanofibers is presented, based on an all-aqueous coaxial electrospinning process. In this process, silk fibroin (SF and silk-elastin-like protein polymer (SELP, both in aqueous solution, with high and low viscosity, respectively, were used as the inner (core and outer (shell layers of the nanofibers. The electrospinnable SF core solution served as a spinning aid for the nonelectrospinnable SELP shell solution. Uniform nanofibers with average diameter from 301 ± 108 nm to 408 ± 150 nm were obtained through adjusting the processing parameters. The core-shell structures of the nanofibers were confirmed by fluorescence and electron microscopy. In order to modulate the mechanical properties and provide stability in water, the as-spun SF-SELP nanofiber mats were treated with methanol vapor to induce β-sheet physical crosslinks. FTIR confirmed the conversion of the secondary structure from a random coil to β-sheets after the methanol treatment. Tensile tests of SF-SELP core-shell structured nanofibers showed good flexibility with elongation at break of 5.20% ± 0.57%, compared with SF nanofibers with an elongation at break of 1.38% ± 0.22%. The SF-SELP core-shell structured nanofibers should provide useful options to explore in the field of biomaterials due to the improved flexibility of the fibrous mats and the presence of a dynamic SELP layer on the outer surface.

  18. Core-shell Au-Pd nanoparticles as cathode catalysts for microbial fuel cell applications

    Science.gov (United States)

    Yang, Gaixiu; Chen, Dong; Lv, Pengmei; Kong, Xiaoying; Sun, Yongming; Wang, Zhongming; Yuan, Zhenhong; Liu, Hui; Yang, Jun

    2016-01-01

    Bimetallic nanoparticles with core-shell structures usually display enhanced catalytic properties due to the lattice strain created between the core and shell regions. In this study, we demonstrate the application of bimetallic Au-Pd nanoparticles with an Au core and a thin Pd shell as cathode catalysts in microbial fuel cells, which represent a promising technology for wastewater treatment, while directly generating electrical energy. In specific, in comparison with the hollow structured Pt nanoparticles, a benchmark for the electrocatalysis, the bimetallic core-shell Au-Pd nanoparticles are found to have superior activity and stability for oxygen reduction reaction in a neutral condition due to the strong electronic interaction and lattice strain effect between the Au core and the Pd shell domains. The maximum power density generated in a membraneless single-chamber microbial fuel cell running on wastewater with core-shell Au-Pd as cathode catalysts is ca. 16.0 W m−3 and remains stable over 150 days, clearly illustrating the potential of core-shell nanostructures in the applications of microbial fuel cells. PMID:27734945

  19. Rh(0)/Rh(iii) core-shell nanoparticles as heterogeneous catalysts for cyclic carbonate synthesis.

    Science.gov (United States)

    Jung, Younjae; Shin, Taeil; Kim, Kiseong; Byun, Hyeeun; Cho, Sung June; Kim, Hyunwoo; Song, Hyunjoon

    2016-12-22

    Rh(0)/Rh(iii) core-shell nanoparticles were prepared by surface oxidation of Rh nanoparticles with N-bromosuccinimide. They were employed as heterogeneous catalysts for cyclic carbonate synthesis from propylene oxide and CO2, and exhibited high activity and excellent recyclability due to Lewis acidic Rh(iii) species on the shells.

  20. Supercooling Self-Assembly of Magnetic Shelled Core/Shell Supraparticles.

    Science.gov (United States)

    Zheng, Xiaotong; Yan, Bingyun; Wu, Fengluan; Zhang, Jinlong; Qu, Shuxin; Zhou, Shaobing; Weng, Jie

    2016-09-14

    Molecular self-assembly has emerged as a powerful technique for controlling the structure and properties of core/shell structured supraparticles. However, drug-loading capacities and therapeutic effects of self-assembled magnetic core/shell nanocarriers with magnetic nanoparticles in the core are limited by the intervention of the outer organic or inorganic shell, the aggregation of superparamagnetic nanoparticles, the narrowed inner cavity, etc. Here, we present a self-assembly approach based on rebalancing hydrogen bonds between components under a supercooling process to form a new core/shell nanoscale supraparticle with magnetic nanoparticles as the shell and a polysaccharide as a core. Compared with conventional iron oxide nanoparticles, this magnetic shelled core/shell nanoparticle possesses an optimized inner cavity and a loss-free outer magnetic property. Furthermore, we find that the drug-loaded magnetic shelled nanocarriers showed interesting in vitro release behaviors at different pH conditions, including "swelling-broken", "dissociating-broken", and "bursting-broken" modes. Our experiments demonstrate the novel design of the multifunctional hybrid nanostructure and provide a considerable potential for the biomedical applications.

  1. First Principles Study of Si/Ge Core-Shell nanowires under external uniaxial strain

    CERN Document Server

    Peng, Xihong; Logan, Paul

    2010-01-01

    Density-functional theory based first principles calculations are performed to study the effects of external uniaxial strain on the electronic states of Si/Ge core-shell nanowires along the [110] direction with the diameter of the wire up to 5 nm. As shown in the calculations, the [110] Si/Ge core-shell nanowires without external strain possess a direct band gap, in contrast to the nature of an indirect band gap in bulk Si and Ge. The band structure of the core-shell nanowires can be significantly modulated by an external strain. With a sufficient amount of tensile uniaxial strain, the band gap of the Si/Ge core-shell nanowires experiences a transition from direct to indirect. In addition, our studies showed that the effective masses of charge carriers can be also tuned by the external uniaxial strain. The effective mass of the hole increases dramatically with a tensile strain, while strain shows a minimal effect on tuning the effective mass of the electron. Finally, the relationship between the strain effect...

  2. Microfluidic production of perfluorocarbon-alginate core-shell microparticles for ultrasound therapeutic applications.

    Science.gov (United States)

    Duarte, Ana Rita C; Ünal, Barış; Mano, João F; Reis, Rui L; Jensen, Klavs F

    2014-10-21

    The fabrication of micrometer-sized core-shell particles for ultrasound-triggered delivery offers a variety of applications in medical research. In this work, we report the design and development of a glass capillary microfluidic system containing three concentric glass capillary tubes for the development of core-shell particles. The setup enables the preparation of perfluorocarbon-alginate core-shell microspheres in a single process, avoiding the requirement for further extensive purification steps. Core-shell microspheres in the range of 110-130 μm are prepared and are demonstrated to be stable up to 21 days upon immersion in calcium chloride solution or water. The mechanical stability of the particles is tested by injecting them through a 23 gauge needle into a polyacrylamide gel to mimic the tissue matrix. The integrity of the particles is maintained after the injection process and is disrupted after ultrasound exposure for 15 min. The results suggest that the perfluorcarbon-alginate microparticles could be a promising system for the delivery of compounds, such as proteins, peptides, and small-molecule drugs in ultrasound-based therapies.

  3. Radiological decontamination strippable coatings using PVA and PVP based core-shell polymeric scintillation materials

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Ho Sang; Seo, Bum Kyoung; Lee, Kune Woo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-05-15

    Strippable coatings are innovative technologies for decontamination that effectively reduce loose contamination. These coatings are polymer mixtures, such as water-based organic polymers that are applied to a surface by paintbrush, roller or spray applicator. In this study, the core-shell composite polymer for decontamination from the surface contamination was synthesized by the method of emulsion polymerization and blends of polymers. The strippable polymer emulsion is composed of the poly(styrene-ethyl acrylate) [poly(St-EA)] composite polymer, poly(vinyl alcohol) (PVA) and polyvinylpyrrolidone (PVP). The morphology of the composite emulsion particle was core-shell structure, with polystyrene (PS) as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SDS) as an emulsifier using ammonium persulfate (APS) as an initiator. Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by FT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Decontamination factors (DF) of the strippable polymeric emulsion were evaluated with the polymer blend contents

  4. Gold-Pluronic core-shell nanoparticles: synthesis, characterization and biological evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Simon, Timea; Boca, Sanda [Babes-Bolyai University, Nanobiophotonics and Laser Microspectroscopy Center, Interdisciplinary Research Institute on Bio-Nano-Sciences and Faculty of Physics (Romania); Biro, Dominic [Sapientia University, Department of Mechanical Engineering, Faculty of Technical and Human Sciences (Romania); Baldeck, Patrice [Universite Joseph Fourier and CNRS, Laboratoire Interdisciplinaire de Physique, UMR 5588, CNRS (France); Astilean, Simion, E-mail: simion.astilean@phys.ubbcluj.ro [Babes-Bolyai University, Nanobiophotonics and Laser Microspectroscopy Center, Interdisciplinary Research Institute on Bio-Nano-Sciences and Faculty of Physics (Romania)

    2013-04-15

    This study presents the synthesis of gold-Pluronic core-shell nanoparticles by a two-step method and investigates their biological impact on cancer cells, specifically nanoparticle internalization and cytotoxicity. Uniform, 9-10-nm-sized, hydrophobic gold nanoparticles were synthesized in organic phase by reducing gold salt with oleylamine, after which oleylamine-protected gold nanoparticles were phase-transferred into aqueous medium using Pluronic F127 block copolymer, resulting in gold-Pluronic core-shell nanoparticles with a mean hydrodynamic diameter of {approx}35 nm. The formation and phase-transfer of gold nanoparticles were analyzed by UV-Vis absorption spectroscopy, transmission electron microscopy, and dynamic light scattering. The obtained gold-Pluronic core-shell nanoparticles proved to be highly stable in salted solution. Cytotoxicity tests showed no modification of cellular viability in the presence of properly purified particles. Furthermore, dark-field cellular imaging demonstrated that gold-Pluronic nanoparticles were able to be efficiently uptaken by cells, being internalized through nonspecific endocytosis. The high stability, proven biocompatibility, and imaging properties of gold-Pluronic core-shell nanoparticles hold promise for relevant intracellular applications, with such a design providing the feasibility to combine all multiple functionalities in one nanoparticle for simultaneous detection and imaging.

  5. Photo-physical properties enhancement of bare and core-shell quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Mumin, Md Abdul, E-mail: pcharpentier@eng.uwo.ca; Akhter, Kazi Farida, E-mail: pcharpentier@eng.uwo.ca; Charpentier, Paul A., E-mail: pcharpentier@eng.uwo.ca [Chemical and Biochemical Engineering, Western University, London Ontario (Canada)

    2014-03-31

    Semiconductor nanocrystals (NCs) (also known as quantum dots, QDs) have attracted immense attention for their size-tunable optical properties that makes them impressive candidates for solar cells, light emitting devices, lasers, as well as biomedical imaging. However monodispersity, high and consistent photoluminescence, photostability, and biocompatibility are still major challenges. This work focuses on optimizing the photophysical properties and biocompatibility of QDs by forming core-shell nanostructures and their encapsulation by a carrier. Highly luminescent CdS and CdS-ZnS core-shell QDs with 5 nm sizes were synthesized using a facile approach based on pyrolysis of the single molecule precursors. After capping the CdS QDs with a thin layer of ZnS to reduce toxicity, the photoluminescence and photostability of the core-shell QDs was significantly enhanced. To make both the bare and core/shell structure QDs more resistant against photochemical reactions, a mesoporous silica layer was grown on the QDs through a reverse microemulsion technique based on hydrophobic interaction. This encapsulation enhanced the quantum yield and photostability compared to the bare QDs by providing much stronger resistance to oxidation and Oswald ripening of QDs. Encapsulation also improved biocompatibility of QDs that was evaluated with human umbilical vein endothelial cell lines (HUVEC)

  6. Novel ZnO/Fe₂O₃ Core-Shell Nanowires for Photoelectrochemical Water Splitting.

    Science.gov (United States)

    Hsu, Yu-Kuei; Chen, Ying-Chu; Lin, Yan-Gu

    2015-07-01

    A facile and simple fabrication of Fe2O3 as a shell layer on the surface of ZnO nanowires (NW) as a core-shell nanoelectrode is applied for the photoelectrochemical (PEC) splitting of water. An ZnO NW array of core diameter ∼80 nm was grown on a fluorine-doped tin-oxide (FTO) substrate with a hydrothermal method; subsequent deposition and annealing achieved a shell structure of the Fe2O3 layer of thickness a few nm. Fe2O3 in the α phase and ZnO in the wurtzite phase were identified as the structures of the shell and core, respectively, through analysis with X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The ZnO/Fe2O3 core-shell NW showed an excellent PEC response to the oxidation of water, and also benefited from a negative shift of onset potential because of an n/n heterojunction structure. A detailed energy diagram of the ZnO/Fe2O3 core-shell NW was investigated with a Mott-Schottky analysis. This novel core-shell nanostructure can hence not only exhibit a great potential for the solar generation of hydrogen, but also offer a blueprint for the future design of photocatalysts.

  7. Facile preparation of hybrid core-shell nanorods for photothermal and radiation combined therapy

    Science.gov (United States)

    Deng, Yaoyao; Li, Erdong; Cheng, Xiaju; Zhu, Jing; Lu, Shuanglong; Ge, Cuicui; Gu, Hongwei; Pan, Yue

    2016-02-01

    The hybrid platinum@iron oxide core-shell nanorods with high biocompatibility were synthesized and applied for combined therapy. These hybrid nanorods exhibit a good photothermal effect on cancer cells upon irradiation with a NIR laser. Furthermore, due to the presence of a high atomic number element (platinum core), the hybrid nanorods show a synergistic effect between photothermal and radiation therapy. Therefore, the as-prepared core-shell nanorods could play an important role in facilitating synergistic therapy between photothermal and radiation therapy to achieve better therapeutic efficacy.The hybrid platinum@iron oxide core-shell nanorods with high biocompatibility were synthesized and applied for combined therapy. These hybrid nanorods exhibit a good photothermal effect on cancer cells upon irradiation with a NIR laser. Furthermore, due to the presence of a high atomic number element (platinum core), the hybrid nanorods show a synergistic effect between photothermal and radiation therapy. Therefore, the as-prepared core-shell nanorods could play an important role in facilitating synergistic therapy between photothermal and radiation therapy to achieve better therapeutic efficacy. Electronic supplementary information (ESI) available: Details of general experimental procedures. See DOI: 10.1039/c5nr09102k

  8. Photo-physical properties enhancement of bare and core-shell quantum dots

    Science.gov (United States)

    Mumin, Md Abdul; Akhter, Kazi Farida; Charpentier, Paul A.

    2014-03-01

    Semiconductor nanocrystals (NCs) (also known as quantum dots, QDs) have attracted immense attention for their size-tunable optical properties that makes them impressive candidates for solar cells, light emitting devices, lasers, as well as biomedical imaging. However monodispersity, high and consistent photoluminescence, photostability, and biocompatibility are still major challenges. This work focuses on optimizing the photophysical properties and biocompatibility of QDs by forming core-shell nanostructures and their encapsulation by a carrier. Highly luminescent CdS and CdS-ZnS core-shell QDs with 5 nm sizes were synthesized using a facile approach based on pyrolysis of the single molecule precursors. After capping the CdS QDs with a thin layer of ZnS to reduce toxicity, the photoluminescence and photostability of the core-shell QDs was significantly enhanced. To make both the bare and core/shell structure QDs more resistant against photochemical reactions, a mesoporous silica layer was grown on the QDs through a reverse microemulsion technique based on hydrophobic interaction. This encapsulation enhanced the quantum yield and photostability compared to the bare QDs by providing much stronger resistance to oxidation and Oswald ripening of QDs. Encapsulation also improved biocompatibility of QDs that was evaluated with human umbilical vein endothelial cell lines (HUVEC).

  9. Core-shell Au-Pd nanoparticles as cathode catalysts for microbial fuel cell applications

    Science.gov (United States)

    Yang, Gaixiu; Chen, Dong; Lv, Pengmei; Kong, Xiaoying; Sun, Yongming; Wang, Zhongming; Yuan, Zhenhong; Liu, Hui; Yang, Jun

    2016-10-01

    Bimetallic nanoparticles with core-shell structures usually display enhanced catalytic properties due to the lattice strain created between the core and shell regions. In this study, we demonstrate the application of bimetallic Au-Pd nanoparticles with an Au core and a thin Pd shell as cathode catalysts in microbial fuel cells, which represent a promising technology for wastewater treatment, while directly generating electrical energy. In specific, in comparison with the hollow structured Pt nanoparticles, a benchmark for the electrocatalysis, the bimetallic core-shell Au-Pd nanoparticles are found to have superior activity and stability for oxygen reduction reaction in a neutral condition due to the strong electronic interaction and lattice strain effect between the Au core and the Pd shell domains. The maximum power density generated in a membraneless single-chamber microbial fuel cell running on wastewater with core-shell Au-Pd as cathode catalysts is ca. 16.0 W m‑3 and remains stable over 150 days, clearly illustrating the potential of core-shell nanostructures in the applications of microbial fuel cells.

  10. Origin of Spontaneous Core-Shell AIGaAs Nanowires Grown by Molecular Beam Epitaxy

    DEFF Research Database (Denmark)

    Dubrovskii, V. G.; Shtrom, I. V.; Reznik, R. R.;

    2016-01-01

    Based on the high-angle annular dark-field scanning transmission electron microscopy and energy dispersive X-ray spectroscopy studies, we unravel the origin of spontaneous core shell AlGaAs nanowires grown by gold-assisted molecular beam epitaxy. Our AlGaAs nanowires have a cylindrical core...

  11. Tunable Band Gap and Conductivity Type of ZnSe/Si Core-Shell Nanowire Heterostructures

    Directory of Open Access Journals (Sweden)

    Yijie Zeng

    2014-10-01

    Full Text Available The electronic properties of zincblende ZnSe/Si core-shell nanowires (NWs with a diameter of 1.1–2.8 nm are calculated by means of the first principle calculation. Band gaps of both ZnSe-core/Si-shell and Si-core/ZnSe-shell NWs are much smaller than those of pure ZnSe or Si NWs. Band alignment analysis reveals that the small band gaps of ZnSe/Si core-shell NWs are caused by the interface state. Fixing the ZnSe core size and enlarging the Si shell would turn the NWs from intrinsic to p-type, then to metallic. However, Fixing the Si core and enlarging the ZnSe shell would not change the band gap significantly. The partial charge distribution diagram shows that the conduction band maximum (CBM is confined in Si, while the valence band maximum (VBM is mainly distributed around the interface. Our findings also show that the band gap and conductivity type of ZnSe/Si core-shell NWs can be tuned by the concentration and diameter of the core-shell material, respectively.

  12. Tunable Band Gap and Conductivity Type of ZnSe/Si Core-Shell Nanowire Heterostructures.

    Science.gov (United States)

    Zeng, Yijie; Xing, Huaizhong; Fang, Yanbian; Huang, Yan; Lu, Aijiang; Chen, Xiaoshuang

    2014-10-31

    The electronic properties of zincblende ZnSe/Si core-shell nanowires (NWs) with a diameter of 1.1-2.8 nm are calculated by means of the first principle calculation. Band gaps of both ZnSe-core/Si-shell and Si-core/ZnSe-shell NWs are much smaller than those of pure ZnSe or Si NWs. Band alignment analysis reveals that the small band gaps of ZnSe/Si core-shell NWs are caused by the interface state. Fixing the ZnSe core size and enlarging the Si shell would turn the NWs from intrinsic to p-type, then to metallic. However, Fixing the Si core and enlarging the ZnSe shell would not change the band gap significantly. The partial charge distribution diagram shows that the conduction band maximum (CBM) is confined in Si, while the valence band maximum (VBM) is mainly distributed around the interface. Our findings also show that the band gap and conductivity type of ZnSe/Si core-shell NWs can be tuned by the concentration and diameter of the core-shell material, respectively.

  13. Highly tuneable hole quantum dots in Ge-Si core-shell nanowires

    NARCIS (Netherlands)

    Brauns, M.; Ridderbos, Joost; Ridderbos, Joost; Li, Ang; van der Wiel, Wilfred Gerard; Bakkers, Erik P.A.M.; Zwanenburg, Floris Arnoud

    2016-01-01

    We define single quantum dots of lengths varying from 60 nm up to nearly half a micron in Ge-Si core-shell nanowires. The charging energies scale inversely with the quantum dot length between 18 and 4 meV. Subsequently, we split up a long dot into a double quantum dot with a separate control over

  14. Synthesis and characterization of highly-ordered ZnO/PbS core/shell heterostructures

    Science.gov (United States)

    Zhu, Y. F.; Zhou, G. H.; Ding, H. Y.; Liu, A. H.; Lin, Y. B.; Dong, Y. W.

    2011-11-01

    The strategy to manipulate nanoscale building blocks into well-organized heterostructures is very important to both material synthesis and nanodevice applications. In this work, highly-ordered ZnO/PbS core/shell nanowire arrays were fabricated by a facile and low temperature chemical route. Large area and well-aligned ZnO nanowire arrays were firstly fabricated on conductive glass substrates, and then the synthesis of ZnO/ZnS and ZnO/PbS core/shell nanowire arrays were realized by a chemical conversion method. The morphology, structure, and composition of the obtained nanostructures were confirmed by field-emission scanning electron microscopy, energy-dispersive X-ray analysis, and X-ray diffraction measurements. The optical properties of the synthesized nanostructures were investigated by micro-Raman and photoluminescence spectroscopy. In the synthesized ZnO/PbS core/shell nanowire arrays, the ZnO cores can provide direct conduction pathways for electron transport and PbS shells possess superior photoelectric performance. Therefore, the obtained ZnO/PbS core/shell nanostructures may have potential application in photovoltaic devices.

  15. Interaction of CdSe/ZnS core-shell semiconductor nanocrystals in solid thin films

    NARCIS (Netherlands)

    Chistyakov, A. A.; Martynov, I. L.; Mochalov, K. E.; Oleinikov, V. A.; Sizova, S. V.; Ustinovich, E. A.; Zakharchenko, K. V.

    2006-01-01

    The optical properties of CdSe/ZnS semiconductor nanocrystals with the core-shell structure are studied upon visible-laser excitation in a wide range of flux densities. It is demonstrated that the dimensional quantization effect is preserved in the films with a limiting high concentration of nanocry

  16. WC@meso-Pt core-shell nanostructures for fuel cells.

    Science.gov (United States)

    Chen, Zhao-Yang; Ma, Chun-An; Chu, You-Qun; Jin, Jia-Mei; Lin, Xiao; Hardacre, Christopher; Lin, Wen-Feng

    2013-12-25

    We developed a facile method to synthesize core-shell WC@meso-Pt nanocatalysts by carburizing ammonium tungstate and copper nitrate via gas-solid reactions, followed by a Pt replacement reaction. The mesoporous nanocomposite displays higher activity and stability towards methanol electrooxidation than commercial Pt/C catalysts.

  17. Platinum-coated non-noble metal-noble metal core-shell electrocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Adzic, Radoslav; Zhang, Junliang; Mo, Yibo; Vukmirovic, Miomir

    2015-04-14

    Core-shell particles encapsulated by a thin film of a catalytically active metal are described. The particles are preferably nanoparticles comprising a non-noble core with a noble metal shell which preferably do not include Pt. The non-noble metal-noble metal core-shell nanoparticles are encapsulated by a catalytically active metal which is preferably Pt. The core-shell nanoparticles are preferably formed by prolonged elevated-temperature annealing of nanoparticle alloys in an inert environment. This causes the noble metal component to surface segregate and form an atomically thin shell. The Pt overlayer is formed by a process involving the underpotential deposition of a monolayer of a non-noble metal followed by immersion in a solution comprising a Pt salt. A thin Pt layer forms via the galvanic displacement of non-noble surface atoms by more noble Pt atoms in the salt. The overall process is a robust and cost-efficient method for forming Pt-coated non-noble metal-noble metal core-shell nanoparticles.

  18. Preparation and Characterization of Low Dispersity Anionic Multiresponsive Core-Shell Polymer Nanoparticles

    NARCIS (Netherlands)

    Pinheiro, J.P.; Moura, L.; Fokkink, R.G.; Farinha, J.P.S.

    2012-01-01

    We prepared anionic multistimuli responsive core-shell polymer nanoparticles with very low size dispersity. By using either acrylic acid (AA) or methacrylic acid (MA) as a comonomer in the poly(N-isopropyl acrylamide) (PNIPAM) shell, we are able to change the distribution of negative charges in the

  19. Unique Properties of Core Shell Ag@Au Nanoparticles for the Aptasensing of Bacterial Cells

    Directory of Open Access Journals (Sweden)

    Ezat Hamidi-Asl

    2016-08-01

    Full Text Available In this article, it is shown that the efficiency of an electrochemical aptasensing device is influenced by the use of different nanoparticles (NPs such as gold nanoparticles (Au, silver nanoparticles (Ag, hollow gold nanospheres (HGN, hollow silver nanospheres (HSN, silver–gold core shell (Ag@Au, gold–silver core shell (Au@Ag, and silver–gold alloy nanoparticles (Ag/Au. Among these nanomaterials, Ag@Au core shell NPs are advantageous for aptasensing applications because the core improves the physical properties and the shell provides chemical stability and biocompatibility for the immobilization of aptamers. Self-assembly of the NPs on a cysteamine film at the surface of a carbon paste electrode is followed by the immobilization of thiolated aptamers at these nanoframes. The nanostructured (Ag@Au aptadevice for Escherichia coli as a target shows four times better performance in comparison to the response obtained at an aptamer modified planar gold electrode. A comparison with other (core shell NPs is performed by cyclic voltammetry and differential pulse voltammetry. Also, the selectivity of the aptasensor is investigated using other kinds of bacteria. The synthesized NPs and the morphology of the modified electrode are characterized by UV-Vis absorption spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis, and electrochemical impedance spectroscopy.

  20. A new class of PANI-Ag core-shell nanorods with sensing dimensions.

    Science.gov (United States)

    Shukla, Vineet K; Yadav, Poonam; Yadav, Raghvendra S; Mishra, Priya; Pandey, Avinash C

    2012-07-07

    A single-step, cost-effective and eco-safe synthesis of a new class of homogeneous silver-polyaniline (PANI-Ag) core-shell nanorods is carried out via mild photolysis by ultraviolet radiation from sunlight (SUN UV-radiation). X-ray diffraction (XRD) of these core-shell nanorods gives two additional peaks from PANI centered at 2θ = 20.5° and 24. 9°. A validation of the core-shell structural information is given by transmission electron spectroscopy (TEM) whereas the tubular shape morphology is determined by scanning electron microscopy (SEM). UV-Vis. absorption shows a strong blue-shift along with photoluminescence emission. Fourier transform-infrared spectroscopy (FT-IR) and energy dispersive X-ray spectroscopy (EDX) also support the core-shell formation. Thermogravimetric analysis (TGA) shows good thermal stability and allows excellent detection of hydrogen peroxide and hydrazine. The cyclic voltammetry (CV) results show excellent electro-activation, indicating its promising potential in sensing of clinical and environmental analytes.

  1. Shell morphology of core-shell latexes based on conductive polymers

    NARCIS (Netherlands)

    Huijs, F.M; Vercauteren, F.F.; de Ruiter, B.; Kalicharan, D; Hadziioannou, G

    Core-shell latexes with a conductive shell can be used to prepare transparent conducting layers. We have focussed on the relation between the conducting polymer content and the shell morphology and on its influence on conductivity. At low polypyrrole (PPy) concentrations the shell has a smooth

  2. Peptide Microencapsulation by Core-Shell Printing Technology for Edible Film Application

    NARCIS (Netherlands)

    Blanco-Pascual, N.; Koldeweij, R.B.J.; Stevens, R.S.A.; Montero, M.P.; Gómez-Guillén, M.C.; Cate, A.T.T.

    2014-01-01

    This paper presents a new microencapsulation methodology for incorporation of functional ingredients in edible films. Core-shell microcapsules filled with demineralized water (C) or 1 % (w/v) peptide solution (Cp) were prepared using the microencapsulation printer technology. Shell material, compose

  3. Synthesis of TiC/W core-shell nanoparticles by precipitate-coating process

    Energy Technology Data Exchange (ETDEWEB)

    Xia Min [30 Xueyuan Road, Haidian District, Institute of Nuclear Materials, University of Science and Technology Beijing, Beijing (China); 111, 1st Section, Northern 2nd Ring Road, Institute of Powder Metallurgy and Advanced Ceramics, Southwest Jiaotong University, Chengdu (China); Yan Qingzhi, E-mail: qingzhiyan111@163.com [30 Xueyuan Road, Haidian District, Institute of Nuclear Materials, University of Science and Technology Beijing, Beijing (China); Xu Lei [30 Xueyuan Road, Haidian District, Institute of Nuclear Materials, University of Science and Technology Beijing, Beijing (China); Zhu Lingxu; Guo Hongyan; Ge Changchun [30 Xueyuan Road, Haidian District, The Institute of Nuclear Materials, University of Science and Technology Beijing, Beijing (China); 111, 1st Section, Northern 2nd Ring Road, Institute of Powder Metallurgy and Advanced Ceramics, Southwest Jiaotong University, Chengdu (China)

    2012-11-15

    Graphical abstract: Well-dispersed titanium carbide/tungsten (TiC/W) core-shell nanoparticles with high-purity and uniform diameters were firstly synthesized by precipitate-coating process. Such unique process suggests a new method for preparing X/W (X refers the water-insoluble nanoparticles) core-shell nanoparticles with different cores. Abstract: Well-dispersed titanium carbide/tungsten (TiC/W) core-shell nanoparticles with high-purity and uniform diameters were firstly synthesized by precipitate-coating process. The as-synthesized nanoparticles were characterized by X-ray diffraction (XRD), Filed-emission scanning electron microscope (FESEM), Transmission electron microscopy (TEM), energy dispersive spectrum (EDS). Results revealed that the as-synthesized nanoparticles possess uniform diameters about 100 nm, and high purity. TEM and the corresponding FFT images demonstrate that TiC nanoparticles were well-encapsulated by W shells. Such unique process suggests a new method for preparing X/W (X refers the water-insoluble nanoparticles) core-shell nanoparticles with different cores.

  4. Electrospun core-shell fibers for robust silicon nanoparticle-based lithium ion battery anodes.

    Science.gov (United States)

    Hwang, Tae Hoon; Lee, Yong Min; Kong, Byung-Seon; Seo, Jin-Seok; Choi, Jang Wook

    2012-02-01

    Because of its unprecedented theoretical capacity near 4000 mAh/g, which is approximately 10-fold larger compared to those of the current commercial graphite anodes, silicon has been the most promising anode for lithium ion batteries, particularly targeting large-scale energy storage applications including electrical vehicles and utility grids. Nevertheless, Si suffers from its short cycle life as well as the limitation for scalable electrode fabrication. Herein, we develop an electrospinning process to produce core-shell fiber electrodes using a dual nozzle in a scalable manner. In the core-shell fibers, commercially available nanoparticles in the core are wrapped by the carbon shell. The unique core-shell structure resolves various issues of Si anode operations, such as pulverization, vulnerable contacts between Si and carbon conductors, and an unstable sold-electrolyte interphase, thereby exhibiting outstanding cell performance: a gravimetric capacity as high as 1384 mAh/g, a 5 min discharging rate capability while retaining 721 mAh/g, and cycle life of 300 cycles with almost no capacity loss. The electrospun core-shell one-dimensional fibers suggest a new design principle for robust and scalable lithium battery electrodes suffering from volume expansion.

  5. Core-Shell-structured Dendritic Mesoporous Silica Nanoparticles for Combined Photodynamic Therapy and Antibody Delivery.

    Science.gov (United States)

    Abbaraju, Prasanna Lakshmi; Yang, Yannan; Yu, Meihua; Fu, Jianye; Xu, Chun; Yu, Chengzhong

    2017-07-04

    Multifunctional core-shell-structured dendritic mesoporous silica nanoparticles with a fullerene-doped silica core, a dendritic silica shell and large pores have been prepared. The combination of photodynamic therapy and antibody therapeutics significantly inhibits the cancer cell growth by effectively reducing the level of anti-apoptotic proteins. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Nonthermal Plasma Synthesis of Core/Shell Quantum Dots: Strained Ge/Si Nanocrystals.

    Science.gov (United States)

    Hunter, Katharine I; Held, Jacob T; Mkhoyan, K Andre; Kortshagen, Uwe R

    2017-03-08

    In this work, we present an all-gas-phase approach for the synthesis of quantum-confined core/shell nanocrystals (NCs) as a promising alternative to traditional solution-based methods. Spherical quantum dots (QDs) are grown using a single-stage flow-through nonthermal plasma, yielding monodisperse NCs, with a concentric core/shell structure confirmed by electron microscopy. The in-flight negative charging of the NCs by plasma electrons keeps the NC cores separated during shell growth. The success of this gas-phase approach is demonstrated here through the study of Ge/Si core/shell QDs. We find that the epitaxial growth of a Si shell on the Ge QD core compressively strains the Ge lattice and affords the ability to manipulate the Ge band structure by modulation of the core and shell dimensions. This all-gas-phase approach to core/shell QD synthesis offers an effective method to produce high-quality heterostructured NCs with control over the core and shell dimensions.

  7. High thermal stability of core-shell structures dominated by negative interface energy.

    Science.gov (United States)

    Zhu, Yong-Fu; Zhao, Ning; Jin, Bo; Zhao, Ming; Jiang, Qing

    2017-03-29

    Nanoscale core/shell structures are of interest in catalysis due to their superior catalytic properties. Here we investigated the thermal stability of the coherent core-shell structures in a thermodynamic way by considering the impact from the core with the bulk melting point Tm(∞) lower or higher than the shell. When a low-Tm(∞) core is adopted, core-shell melting induced by the melting depression of the core does not occur upon heating because of the superheating, although the melting depression of the core can be triggered ultimately by the preferential melting of the high-Tm(∞) shell for small cores. The superheating of the core is contributed by the negative solid-solid interface energy, while the depression is originated from the positive solid-liquid interface energy. Owing to the presence of the negative interface energy, moreover, the low-Tm(∞)-core structure possesses a low difference in thermal expansion between the core and the shell, high activation energy of outward atomic diffusion from the core to shell, and low heat capacity. This result is beneficial for the core-shell structure design for its application in catalysis.

  8. Controlled Release of Ciprofloxacin from Core-Shell Nanofibers with Monolithic or Blended Core.

    Science.gov (United States)

    Zupančič, Špela; Sinha-Ray, Sumit; Sinha-Ray, Suman; Kristl, Julijana; Yarin, Alexander L

    2016-04-04

    Sustained controlled drug release is one of the prominent contributions for more successful treatment outcomes in the case of several diseases. However, the incorporation of hydrophilic drugs into nanofibers, a promising novel delivery system, and achieving a long-term sustained release still pose a challenging task. In this work we demonstrated a robust method of avoiding burst release of drugs and achieving a sustained drug release from 2 to 4 weeks using core-shell nanofibers with poly(methyl methacrylate) (PMMA) shell and monolithic poly(vinyl alcohol) (PVA) core or a novel type of core-shell nanofibers with blended (PVA and PMMA) core loaded with ciprofloxacin hydrochloride (CIP). It is also shown that, for core-shell nanofibers with monolithic core, drug release can be manipulated by varying flow rate of the core PVA solution, whereas for core-shell nanofibers with blended core, drug release can be manipulated by varying the ratios between PMMA and PVA in the core. During coaxial electrospinning, when the solvent from the core evaporates in concert with the solvent from the shell, the interconnected pores spanning the core and the shell are formed. The release process is found to be desorption-limited and agrees with the two-stage desorption model. Ciprofloxacin-loaded nanofiber mats developed in the present work could be potentially used as local drug delivery systems for treatment of several medical conditions, including periodontal disease and skin, bone, and joint infections.

  9. Hydrothermal synthesis of core-shell TiO2 to enhance the photocatalytic hydrogen evolution

    Science.gov (United States)

    Jiang, Jinghui; Zhou, Han; Zhang, Fan; Fan, Tongxiang; Zhang, Di

    2016-04-01

    A hydrothermal approach was designed to synthesize core-shell TiO2 with interior cavity by making sodium dodecyl sulfonate (SDS) as the surfactant and the mixture of water and ethanol as the solvent. The control experiment of solvent reveals ethanol and water are responsible for the formation of sphere and interior cavity, respectively. Besides, SDS can assist the growth of core-shell structure, and the sizes of sphere and interior cavity can be tuned by regulating the reaction time or temperature. UV-vis absorption proves core-shell structure with interior cavity can increase the absorption of incident light to enhance the optical activity of final product. The calculated bandgap and photoluminescence (PL) analyses reveal the coexistence of rutile in final product can optimize the bandgap to 3.03 eV and delay the charge recombination. As a result, an effective photocatalytic hydrogen evolution under full spectrum irradiation can be harvested by the as-synthesized core-shell spheres to reach a quantum yield, approximately 9.57% at 340 nm wavelength.

  10. Doping GaP core-shell nanowire pn-junctions

    DEFF Research Database (Denmark)

    Yazdi, Sadegh; Berg, Alexander; Borgström, Magnus T.

    2015-01-01

    The doping process in GaP core-shell nanowire pn-junctions using different precursors is evaluated by mapping the nanowires' electrostatic potential distribution by means of off-axis electron holography. Three precursors, triethyltin (TESn), ditertiarybutylselenide, and silane are investigated fo...

  11. Morphology and film formation of poly(butyl methacrylate)-polypyrrole core-shell latex particles

    NARCIS (Netherlands)

    Huijs, F; Lang, J

    2000-01-01

    Core-shell latex particles made of a poly(butyl methacrylate) (PBMA) core and a thin polypyrrole (PPy) shell were synthesized by two-stage polymerization. In the first stage, PBMA latex particles were synthesized in a semicontinuous process by free-radical polymerization. PBMA latex particles were l

  12. Near-infrared photocatalysis based on YF3 : Yb3+,Tm3+/TiO2 core/shell nanoparticles.

    Science.gov (United States)

    Qin, Weiping; Zhang, Daisheng; Zhao, Dan; Wang, Lili; Zheng, Kezhi

    2010-04-07

    We report the novel near-infrared (NIR) photocatalysis of YF(3) : Yb(3+),Tm(3+)/TiO(2) core/shell nanoparticles. The core/shell nanoparticles show photocatalytic activity under the NIR irradiation. This study demonstrates that the NIR energy can be used as the driving source for photocatalysis besides the UV and visible energy.

  13. Shape-controlled synthesis of Au@Pd core-shell nanoparticles and their corresponding electrochemical properties

    KAUST Repository

    Song, Hyon Min

    2012-01-01

    The shape-controlled synthesis of Au@Pd core-shell nanoparticles (NPs) was successfully achieved through the emulsion phase generated during the phase transfer from organic to aqueous medium. Contrary to conventional epitaxial growth for obtaining core-shell structures, this method does not require high temperatures and does not have shape restrictions. © 2012 The Royal Society of Chemistry.

  14. Dynamically controlled one-pot synthesis of heterogeneous core-shell MOF single crystals using guest molecules.

    Science.gov (United States)

    Wang, Lei; Yang, Weiting; Li, Yangxue; Xie, Zhigang; Zhu, Wei; Sun, Zhong-Ming

    2014-10-11

    A new mixed guest approach for the synthesis of heterogeneous core-shell MOF crystals was exemplified by one-pot assembly of photoactive guests into an anionic host framework. The formation mechanism, photophysical properties and oxygen gas sensing properties of as-synthesized core-shell MOF crystals were also investigated.

  15. CSR at Daimler

    OpenAIRE

    Geipel, Teresa

    2013-01-01

    Social responsibility of companies is a topic which has been more and more discussed during the last years. A lot of initiatives were started by the headline of Corporate Social Responsibility. But are these initiatives just window dressing or have employees really internalized the importance of Corporate Social Responsibility (CSR) and act according to the corporate principles? This project investigates on the CSR strategy and its implementation at the German multinational cooperation Daimle...

  16. Glucose Sensors Based on Core@Shell Magnetic Nanomaterials and Their Application in Diabetes Management: A Review.

    Science.gov (United States)

    Liu, Lin; Lv, Hongying; Teng, Zhenyuan; Wang, Chengyin; Wang, Guoxiu

    2015-01-01

    This review presents a comprehensive attempt to conclude and discuss various glucose biosensors based on core@shell magnetic nanomaterials. Owing to good biocompatibility and stability, the core@shell magnetic nanomaterials have found widespread applications in many fields and draw extensive attention. Most magnetic nanoparticles possess an intrinsic enzyme mimetic activity like natural peroxidases, which invests magnetic nanomaterials with great potential in the construction of glucose sensors. We summarize the synthesis of core@shell magnetic nanomaterials, fundamental theory of glucose sensor and the advances in glucose sensors based on core@shell magnetic nanomaterials. The aim of the review is to provide an overview of the exploitation of the core@shell magnetic nanomaterials for glucose sensors construction.

  17. Synthesis and properties MFe2O4 (M = Fe, Co) nanoparticles and core-shell structures

    Science.gov (United States)

    Yelenich, O. V.; Solopan, S. O.; Greneche, J. M.; Belous, A. G.

    2015-08-01

    Individual Fe3-xO4 and CoFe2O4 nanoparticles, as well as Fe3-xO4/CoFe2O4 core/shell structures were synthesized by the method of co-precipitation from diethylene glycol solutions. Core/shell structure were synthesized with CoFe2O4-shell thickness of 1.0, 2.5 and 3.5 nm. X-ray diffraction patterns of individual nanoparticles and core/shell are similar and indicate that all synthesized samples have a cubic spinel structure. Compares Mössbauer studies of CoFe2O4, Fe3-xO4 nanoparticles indicate superparamagnetic properties at 300 K. It was shown that individual magnetite nanoparticles are transformed into maghemite through oxidation during the synthesis procedure, wherein the smallest nanoparticles are completely oxidized while a magnetite core does occur in the case of the largest nanoparticles. The Mössbauer spectra of core/shell nanoparticles with increasing CoFe2O4-shell thickness show a gradual decrease in the relative intensity of the quadrupole doublet and significant decrease of the mean isomer shift value at both RT and 77 K indicating a decrease of the superparamagnetic relaxation phenomena. Specific loss power for the prepared ferrofluids was experimentally calculated and it was determined that under influence of ac-magnetic field magnetic fluid based on individual CoFe2O4 and Fe3-xO4 particles are characterized by very low heating temperature, when magnetic fluids based on core/shell nanoparticles demonstrate higher heating effect.

  18. Development of core-shell coaxially electrospun composite PCL/chitosan scaffolds.

    Science.gov (United States)

    Surucu, Seda; Turkoglu Sasmazel, Hilal

    2016-11-01

    This study was related to combining of synthetic Poly (ε-caprolactone) (PCL) and natural chitosan polymers to develop three dimensional (3D) PCL/chitosan core-shell scaffolds for tissue engineering applications. The scaffolds were fabricated with coaxial electrospinning technique and the characterizations of the samples were done by thickness and contact angle (CA) measurements, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-Ray Photoelectron Spectroscopy (XPS) analyses, mechanical and PBS absorption and shrinkage tests. The average inter-fiber diameter values were calculated for PCL (0.717±0.001μm), chitosan (0.660±0.007μm) and PCL/chitosan core-shell scaffolds (0.412±0.003μm), also the average inter-fiber pore size values exhibited decreases of 66.91% and 61.90% for the PCL and chitosan scaffolds respectively, compared to PCL/chitosan core-shell ones. XPS analysis of the PCL/chitosan core-shell structures exhibited the characteristic peaks of PCL and chitosan polymers. The cell culture studies (MTT assay, Confocal Laser Scanning Microscope (CLSM) and SEM analyses) carried out with L929 ATCC CCL-1 mouse fibroblast cell line proved that the biocompatibility performance of the scaffolds. The obtained results showed that the created micro/nano fibrous structure of the PCL/chitosan core-shell scaffolds in this study increased the cell viability and proliferation on/within scaffolds. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. 2D analysis of polydisperse core-shell nanoparticles using analytical ultracentrifugation.

    Science.gov (United States)

    Walter, Johannes; Gorbet, Gary; Akdas, Tugce; Segets, Doris; Demeler, Borries; Peukert, Wolfgang

    2016-12-19

    Accurate knowledge of the size, density and composition of nanoparticles (NPs) is of major importance for their applications. In this work the hydrodynamic characterization of polydisperse core-shell NPs by means of analytical ultracentrifugation (AUC) is addressed. AUC is one of the most accurate techniques for the characterization of NPs in the liquid phase because it can resolve particle size distributions (PSDs) with unrivaled resolution and detail. Small NPs have to be considered as core-shell systems when dispersed in a liquid since a solvation layer and a stabilizer shell will significantly contribute to the particle's hydrodynamic diameter and effective density. AUC measures the sedimentation and diffusion transport of the analytes, which are affected by the core-shell compositional properties. This work demonstrates that polydisperse and thus widely distributed NPs pose significant challenges for current state-of-the-art data evaluation methods. The existing methods either have insufficient resolution or do not correctly reproduce the core-shell properties. First, we investigate the performance of different data evaluation models by means of simulated data. Then, we propose a new methodology to address the core-shell properties of NPs. This method is based on the parametrically constrained spectrum analysis and offers complete access to the size and effective density of polydisperse NPs. Our study is complemented using experimental data derived for ZnO and CuInS2 NPs, which do not have a monodisperse PSD. For the first time, the size and effective density of such structures could be resolved with high resolution by means of a two-dimensional AUC analysis approach.

  20. Lithography-free shell-substrate isolation for core-shell GaAs nanowires.

    Science.gov (United States)

    Haggren, Tuomas; Perros, Alexander Pyymaki; Jiang, Hua; Huhtio, Teppo; Kakko, Joona-Pekko; Dhaka, Veer; Kauppinen, Esko; Lipsanen, Harri

    2016-07-08

    A facile and scalable lithography-free technique(5) for the rapid construction of GaAs core-shell nanowires incorporating shell isolation from the substrate is reported. The process is based on interrupting NW growth and applying a thin spin-on-glass (SOG) layer to the base of the NWs and resuming core-shell NW growth. NW growth occurred in an atmospheric pressure metalorganic vapour phase epitaxy (MOVPE) system with gold nanoparticles used as catalysts for the vapour-liquid-solid growth. It is shown that NW axial core growth and radial shell growth can be resumed after interruption and even exposure to air. The SOG residues and native oxide layer that forms on the NW surface are shown to prevent or perturb resumption of epitaxial NW growth if not removed. Both HF etching and in situ annealing of the air-exposed NWs in the MOVPE were shown to remove the SOG residues and native oxide layer. While both procedures are shown capable of removing the native oxide and enabling resumption of epitaxial NW growth, in situ annealing produced the best results and allowed construction of pristine core-shell NWs. No growth occurred on SOG and it was observed that axial NW growth was more rapid when a SOG layer covered the substrate. The fabricated p-core/n-shell NWs exhibited diode behaviour upon electrical testing. The isolation of the NW shells from the substrate was confirmed by scanning electron microscopy and electrical measurements. The crystal quality of the regrown core-shell NWs was verified with a high resolution transmission electron microscope. The reported technique potentially provides a pathway using MOVPE for scalable and high-throughput production of shell-substrate isolated core-shell NWs on an industrial scale.

  1. Core-shell potassium niobate nanowires for enhanced nonlinear optical effects

    Science.gov (United States)

    Richter, J.; Steinbrück, A.; Zilk, M.; Sergeyev, A.; Pertsch, T.; Tünnermann, A.; Grange, R.

    2014-04-01

    We demonstrate the synthesis as well as the optical characterization of core-shell nanowires. The wires consist of a potassium niobate (KNbO3) core and a gold shell. The nonlinear optical properties of the core are combined with the plasmonic resonance of the shell and offer an enhanced optical signal in the near infrared spectral range. We compare two different functionalization schemes of the core material prior to the shell growth process: silanization and polyelectrolyte. We show that the latter leads to a smoother and complete core-shell nanostructure and an easier-to-use synthesis process. A Mie-theory based theoretical approach is presented to model the enhanced second-harmonic generated (SHG) signal of the core-shell wires, illustrating the influence of the fabrication-induced varying geometrical factors of wire radius and shell thickness. A spectroscopic measurement on a core-shell nanowire shows a strong localized surface plasmon resonance close to 900 nm, which matches with the SHG resonance obtained from nonlinear optical experiments with the same nanowire. According to the simulation, this corresponds to a wire radius of 35 nm and a shell thickness of 7.5 nm. By comparing SHG signals measured from an uncoated nanowire and the coated one, we obtain a 250 times enhancement factor. This is less than the calculated enhancement, which considers a cylindrical nanowire with a perfectly smooth shell. Thus, we explain this discrepancy mainly with the roughness of the synthesized gold shell.We demonstrate the synthesis as well as the optical characterization of core-shell nanowires. The wires consist of a potassium niobate (KNbO3) core and a gold shell. The nonlinear optical properties of the core are combined with the plasmonic resonance of the shell and offer an enhanced optical signal in the near infrared spectral range. We compare two different functionalization schemes of the core material prior to the shell growth process: silanization and polyelectrolyte

  2. Smart micelle@polydopamine core-shell nanoparticles for highly effective chemo-photothermal combination therapy

    Science.gov (United States)

    Zhang, Ruirui; Su, Shishuai; Hu, Kelei; Shao, Leihou; Deng, Xiongwei; Sheng, Wang; Wu, Yan

    2015-11-01

    In this investigation, we have designed and synthesized a novel core-shell polymer nanoparticle system for highly effective chemo-photothermal combination therapy. A nanoscale DSPE-PEG micelle encapsulating doxorubicin (Dox-M) was designed as a core, and then modified by a polydopamine (PDA) shell for photothermal therapy and bortezomib (Btz) administration (Dox-M@PDA-Btz). The facile conjugation of Btz to the catechol-containing PDA shell can form a reversible pH-sensitive boronic acid-catechol conjugate to create a stimuli-responsive drug carrier system. As expected, the micelle@PDA core-shell nanoparticles exhibited satisfactory photothermal efficiency, which has potential for thermal ablation of malignant tissues. In addition, on account of the PDA modification, both Dox and Btz release processes were pH-dependent and NIR-dependent. Both in vitro and in vivo studies illustrated that the Dox-M@PDA-Btz nanoparticles coupled with laser irradiation could enhance the cytotoxicity, and thus combinational therapy efficacy was achieved when integrating Dox, Btz, and PDA into a single nanoplatform. Altogether, our current study indicated that the micelle@polydopamine core-shell nanoparticles could be applied for NIR/pH-responsive sustained-release and synergized chemo-photothermal therapy for breast cancer.In this investigation, we have designed and synthesized a novel core-shell polymer nanoparticle system for highly effective chemo-photothermal combination therapy. A nanoscale DSPE-PEG micelle encapsulating doxorubicin (Dox-M) was designed as a core, and then modified by a polydopamine (PDA) shell for photothermal therapy and bortezomib (Btz) administration (Dox-M@PDA-Btz). The facile conjugation of Btz to the catechol-containing PDA shell can form a reversible pH-sensitive boronic acid-catechol conjugate to create a stimuli-responsive drug carrier system. As expected, the micelle@PDA core-shell nanoparticles exhibited satisfactory photothermal efficiency, which has

  3. Modeling of absorption and scattering properties of core -shell nanoparticles for application as nanoantenna in optical domain

    Science.gov (United States)

    Devi, Jutika; Saikia, Rashmi; Datta, Pranayee

    2016-10-01

    The present paper describes the study of core-shell nanoparticles for application as nanoantenna in the optical domain. To obtain the absorption and extinction efficiencies as well as the angular distribution of the far field radiation pattern and the resonance wavelengths for these metal-dielectric, dielectric-metal and metal-metal core-shell nanoparticles in optical domain, we have used Finite Element Method based COMSOL Multiphysics Software and Mie Theory. From the comparative study of the extinction efficiencies of core-shell nanoparticles of different materials, it is found that for silica - gold core - shell nanoparticles, the resonant wavelength is greater than that of the gold - silver, silver-gold and gold-silica core - shell nanoparticles and also the radiation pattern of the silica-gold core-shell nanoparticle is the most suitable one from the point of view of directivity. The dielectric functions of the core and shell material as well as of the embedded matrix are extremely important and plays a very major role to tune the directivity and resonance wavelength. Such highly controllable parameters of the dielectric - metal core - shell nanoparticles make them suitable for efficient coupling of optical radiation into nanoscale structures for a broad range of applications in the field of communications.

  4. Investigation of linear optical absorption coefficients in core-shell quantum dot (QD) luminescent solar concentrators (LSCs)

    Science.gov (United States)

    Ebrahimipour, Bahareh Alsadat; Askari, Hassan Ranjbar; Ramezani, Ali Behjat

    2016-09-01

    The interlevel absorption coefficient of CdSe/ZnS and ZnS/CdSe core-shell Quantum Dot (QD) in luminescent solar concentrators (LSCs) is reported. By considering the quantum confinement effects, the wave functions and eigenenergies of electrons in the nonperturebative system consists of a core-shell QD have been numerically calculated under the frame work of effective-mass approximation by solving a three-dimensional Schrӧdinger equation. And then the absorption coefficient is obtained under density matrix approximation considering in the polymer sheets of the concentrator including the core-shell QDs. The effect of the hetero-structure geometry upon the energy spectrum and absorption coefficient associated to interlevel transitions was also considered. The results show that the core-shell QDs can absorb the photons with higher energy in solar spectrum as compared to the inverted core-shell. And with a small shell layer diameter, the core-shell QDs produce larger linear absorption coefficients and consequently higher efficiency values, however it is inversed for inverted core-shell QDs. The work described here gives a detailed insight into the promise of QD-based LSCs and the optoelectronic devices applications.

  5. Fluorescent core-shell silica nanoparticles: towards "Lab on a Particle" architectures for nanobiotechnology.

    Science.gov (United States)

    Burns, Andrew; Ow, Hooisweng; Wiesner, Ulrich

    2006-11-01

    Novel nanoscale fluorescent materials are integral to the progress of emergent fields such as nanobiotechnology and facilitate new research in a variety of contexts. Sol-gel derived silica is an excellent host material for creating fluorescent nanoparticles by the inclusion of covalently-bound organic dyes. Significant enhancements in the brightness and stability of organic dye emission can be achieved for silica-based core-shell nanoparticle architectures at length scales down to tens of nanometers with narrow size distributions. This tutorial review will highlight these findings and describe the evolution of the fluorescent core-shell silica nanoparticle concept towards integration of multiple functionalities including mesoporosity, metal nanoshells and quantitative chemical sensing. These developments point towards the development of "lab on a particle" architectures with promising prospects for nanobiotechnology, drug development and beyond.

  6. Preparation and characterization of PS/pAPBA core-shell microspheres

    Institute of Scientific and Technical Information of China (English)

    Changling YAN; Yan LU; Shuyan GAO

    2009-01-01

    Polystyrene microspheres with an average diameter of 55 μm were prepared by suspension polymerization via oxidation of the monomer by ammonium persulfate. Poly-3-aminophenylboronic acid was grafted onto the surfaces of the polystyrene microspheres to form polystyrene/poly-3-aminophenylboronic acid core- shell micospheres. The samples were characterized by scanning electron microscopy, Raman spectroscopy, X-ray photo-electron spectroscopy and nitrogen adsorption/desorption method. The results show that poly-3-aminophenylboronic acid was successfully grafted to the surfaces of the polystyrene microspheres by aromatic ring electron-pairing interaction. The surfaces of the core-shell micro-spheres possessed a porous structure, with the average pore diameter of 30.2 nm and the BET surface area of 193.26 m2/g.

  7. Freestanding three-dimensional core-shell nanoarrays for lithium-ion battery anodes

    Science.gov (United States)

    Tan, Guoqiang; Wu, Feng; Yuan, Yifei; Chen, Renjie; Zhao, Teng; Yao, Ying; Qian, Ji; Liu, Jianrui; Ye, Yusheng; Shahbazian-Yassar, Reza; Lu, Jun; Amine, Khalil

    2016-06-01

    Structural degradation and low conductivity of transition-metal oxides lead to severe capacity fading in lithium-ion batteries. Recent efforts to solve this issue have mainly focused on using nanocomposites or hybrids by integrating nanosized metal oxides with conducting additives. Here we design specific hierarchical structures and demonstrate their use in flexible, large-area anode assemblies. Fabrication of these anodes is achieved via oxidative growth of copper oxide nanowires onto copper substrates followed by radio-frequency sputtering of carbon-nitride films, forming freestanding three-dimensional arrays with core-shell nano-architecture. Cable-like copper oxide/carbon-nitride core-shell nanostructures accommodate the volume change during lithiation-delithiation processes, the three-dimensional arrays provide abundant electroactive zones and electron/ion transport paths, and the monolithic sandwich-type configuration without additional binders or conductive agents improves energy/power densities of the whole electrode.

  8. Epoxy-acrylic core-shell particles by seeded emulsion polymerization.

    Science.gov (United States)

    Chen, Liang; Hong, Liang; Lin, Jui-Ching; Meyers, Greg; Harris, Joseph; Radler, Michael

    2016-07-01

    We developed a novel method for synthesizing epoxy-acrylic hybrid latexes. We first prepared an aqueous dispersion of high molecular weight solid epoxy prepolymers using a mechanical dispersion process at elevated temperatures, and we subsequently used the epoxy dispersion as a seed in the emulsion polymerization of acrylic monomers comprising methyl methacrylate (MMA) and methacrylic acid (MAA). Advanced analytical techniques, such as scanning transmission X-ray microscopy (STXM) and peak force tapping atomic force microscopy (PFT-AFM), have elucidated a unique core-shell morphology of the epoxy-acrylic hybrid particles. Moreover, the formation of the core-shell morphology in the seeded emulsion polymerization process is primarily attributed to kinetic trapping of the acrylic phase at the exterior of the epoxy particles. By this new method, we are able to design the epoxy and acrylic polymers in two separate steps, and we can potentially synthesize epoxy-acrylic hybrid latexes with a broad range of compositions.

  9. Preparation of CdSe/ZnSe Core-shell Nanocrystal in One-step Reaction

    Institute of Scientific and Technical Information of China (English)

    FEI Xiao-fang; SHAN Gui-ye; KONG Xiang-gui; WANG Xin; ZENG Qing-hui; ZHANG You-lin

    2005-01-01

    High-quality Zn-doped CdSe core-shell nanocrystals were successfully prepared by incorporating a stoichiometric amount of Zn precursor into the CdSe reaction system, in which the Se precursor was excess and an Se-rich surface was formed. By injecting different amounts of Zn precursor, the core-shell nanocrystals demonstrated by the emission spectra were formed. The obtained Zn-doped CdSe nanocrystals exhibit a photoluminescence efficiency from 30% to 85%, which is comparable to those for the reported CdSe/ZnS, CdSe/CdS in the literature. In particular, a shell ZnSe layer with different thicknesses of ZnSe can be formed in this experiment by only changing the amount of Zn precursor added, which is simple and effective.

  10. Prediction of the Bandgap of a Core-Shell Microsphere via Light Intensity Fluctuations

    Directory of Open Access Journals (Sweden)

    Moon Kyu Choi

    2011-01-01

    Full Text Available It has been experimentally observed that in the case of microspheres irradiated by light, the absorption wavelength shift occurs, known as the blueshift, with changing shell materials (i.e., by decreasing the refractive index of the shell. In the present investigation, we want to demonstrate it numerically by using the boundary element method. The material used for the simulation is a core-shell (SiO2 and another material of a larger refractive index microsphere and it is irradiated by unpolarized monochromatic light wave. This paper intends to demonstrate that it is possible to predict the bandgap of a core-shell microsphere resulting from two different bandgap materials and that the numerical simulation employed produces the blueshift.

  11. Electrocaloric effect in core-shell ferroelectric ceramics: Theoretical approach and practical conclusions

    Science.gov (United States)

    Anoufa, M.; Kiat, J. M.; Bogicevic, C.

    2015-10-01

    Most of the theoretical and experimental studies on the electrocaloric effect (ECE) are devoted to thin films, but they can be hardly envisaged for cooling macroscopic systems; moreover, the results obtained cannot be easily transposed for larger systems like multilayered ceramics. Therefore, efforts should also be focused on predicting, synthesizing, and characterizing interesting bulk single crystal or ceramics. In ferroelectric nanoparticles and ceramics, the core-shell structure of grains is of uttermost importance to explain the experimental results at small sizes. Moreover, it can be used to tailor physical properties, such as energy storage, by experimenting with the composition, thickness, and permittivity of the shell. Here, we report the effect of such structures on the electrocaloric effects in a variety of ferroelectric materials. The magnitude of ECE as well as its field and temperature-dependence are obtained for different types of core-shells. The optimal configuration for a maximal ECE is deduced.

  12. Improved performances of polymer-based dielectric by using inorganic/organic core-shell nanoparticles

    Science.gov (United States)

    Benhadjala, W.; Bord-Majek, I.; Béchou, L.; Suhir, E.; Buet, M.; Rougé, F.; Gaud, V.; Plano, B.; Ousten, Y.

    2012-10-01

    BaTiO3/hyperbranched polyester/methacrylate core-shell nanoparticles were studied by varying the shell thickness and the methacrylate ratio. We demonstrated that coalescence typically observed in traditional composites employing polymer matrices is significantly reduced. By modifying the shell thickness, the equivalent filler fraction was tuned from 7 wt. % to 41 wt. %. Obtained permittivities were compared with reported models for two-phase mixtures. The nonlinear behavior of the dielectric constant as a function of the equivalent filler fraction has been fitted with the Bruggeman equation. Methacrylate groups reduce by a decade the loss factor by improving nanoparticles adhesion. The permittivity reaching 85 at 1 kHz makes core-shell nanoparticles a promising material for embedded capacitors.

  13. Evidence for Symplectic Symmetry in Ab Initio No-Core Shell Model Results for Light Nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Dytrych, Tomas; Sviratcheva, Kristina D.; Bahri, Chairul; Draayer, Jerry P.; /Louisiana State U.; Vary, James P.; /Iowa State U. /LLNL, Livermore /SLAC

    2007-04-24

    Clear evidence for symplectic symmetry in low-lying states of {sup 12}C and {sup 16}O is reported. Eigenstates of {sup 12}C and {sup 16}O, determined within the framework of the no-core shell model using the JISP16 NN realistic interaction, typically project at the 85-90% level onto a few of the most deformed symplectic basis states that span only a small fraction of the full model space. The results are nearly independent of whether the bare or renormalized effective interactions are used in the analysis. The outcome confirms Elliott's SU(3) model which underpins the symplectic scheme, and above all, points to the relevance of a symplectic no-core shell model that can reproduce experimental B(E2) values without effective charges as well as deformed spatial modes associated with clustering phenomena in nuclei.

  14. Ultrathin Interface Regime of Core-Shell Magnetic Nanoparticles for Effective Magnetism Tailoring.

    Science.gov (United States)

    Moon, Seung Ho; Noh, Seung-Hyun; Lee, Jae-Hyun; Shin, Tae-Hyun; Lim, Yongjun; Cheon, Jinwoo

    2017-02-08

    The magnetic exchange coupling interaction between hard and soft magnetic phases has been important for tailoring nanoscale magnetism, but spin interactions at the core-shell interface have not been well studied. Here, we systematically investigated a new interface phenomenon termed enhanced spin canting (ESC), which is operative when the shell thickness becomes ultrathin, a few atomic layers, and exhibits a large enhancement of magnetic coercivity (HC). We found that ESC arises not from the typical hard-soft exchange coupling but rather from the large magnetic surface anisotropy (KS) of the ultrathin interface. Due to this large increase in magnetism, ultrathin core-shell nanoparticles overreach the theoretical limit of magnetic energy product ((BH)max) and exhibit one of the largest values of specific loss power (SLP), which testifies to their potential capability as an effective mediator of magnetic energy conversion.

  15. III-nitride core-shell nanorod array on quartz substrates.

    Science.gov (United States)

    Bae, Si-Young; Min, Jung-Wook; Hwang, Hyeong-Yong; Lekhal, Kaddour; Lee, Ho-Jun; Jho, Young-Dahl; Lee, Dong-Seon; Lee, Yong-Tak; Ikarashi, Nobuyuki; Honda, Yoshio; Amano, Hiroshi

    2017-03-27

    We report the fabrication of near-vertically elongated GaN nanorods on quartz substrates. To control the preferred orientation and length of individual GaN nanorods, we combined molecular beam epitaxy (MBE) with pulsed-mode metal-organic chemical vapor deposition (MOCVD). The MBE-grown buffer layer was composed of GaN nanograins exhibiting an ordered surface and preferred orientation along the surface normal direction. Position-controlled growth of the GaN nanorods was achieved by selective-area growth using MOCVD. Simultaneously, the GaN nanorods were elongated by the pulsed-mode growth. The microstructural and optical properties of both GaN nanorods and InGaN/GaN core-shell nanorods were then investigated. The nanorods were highly crystalline and the core-shell structures exhibited optical emission properties, indicating the feasibility of fabricating III-nitride nano-optoelectronic devices on amorphous substrates.

  16. Controlled Growth of Ordered III-Nitride Core-Shell Nanostructure Arrays for Visible Optoelectronic Devices

    Science.gov (United States)

    Rishinaramangalam, Ashwin K.; Ul Masabih, Saadat Mishkat; Fairchild, Michael N.; Wright, Jeremy B.; Shima, Darryl M.; Balakrishnan, Ganesh; Brener, Igal; Brueck, S. R. J.; Feezell, Daniel F.

    2015-05-01

    We demonstrate the growth of ordered arrays of nonpolar core-shell nanowalls and semipolar core-shell pyramidal nanostripes on c-plane (0001) sapphire substrates using selective-area epitaxy and metal organic chemical vapor deposition. The nanostructure arrays are controllably patterned into LED mesa regions, demonstrating a technique to impart secondary lithography features into the arrays. We study the dependence of the nanostructure cores on the epitaxial growth conditions and show that the geometry and morphology are strongly influenced by growth temperature, V/III ratio, and pulse interruption time. We also demonstrate the growth of InGaN quantum well shells on the nanostructures and characterize the structures by using micro-photoluminescence and cross-section scanning tunneling electron microscopy.

  17. Core-shell fibrous vascular grafts with the nitric oxide releasing property

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Small-diameter vascular grafts with the nitric oxide(NO) releasing property were designed and prepared.Diazeniumdiolated N,N’-dibutyl-1,6-hexanediamine(DBHD/N2O2) was first synthesized as the NO donor and doped into the biocompatible polymer poly(ε-caprolactone)(PCL).The fibrous vascular grafts were fabricated by electrospinning.Despite the reduced platelet adhesion observed on the NO releasing grafts,the cytotoxicity and burst release were apparent,especially at a higher loading level of the NO donor.In order to solve this problem,core-shell structured nanofibers,in which PCL or gelatin is the shell and PCL doped with the NO donor is the core,were fabricated via coaxial electrospinning.The core-shell structure made the NO release more steady and controllable,and the cell compatibility was improved.

  18. Nonlinear optical properties of Au-Ag core-shell nanorods for all-optical switching

    Science.gov (United States)

    Zhang, Luman; Dai, Hongwei; Wang, Xia; Yao, Linhua; Ma, Zongwei; Han, Jun-Bo

    2017-09-01

    Au-Ag core-shell nanorods with surface plasmon resonance wavelengths of 760-840 nm were prepared. Wavelength-dependent nonlinear absorption coefficients (β) and nonlinear refractive indices (γ) of the nanorods were measured by using Z-scan techniques. The corresponding one-photon and two-photon figures of merit (W and T) were calculated from β and γ. The results show that the requirements of W  >  1 and T  <  1 for the application of all-optical switching could be achieved for all the samples over a broad wavelength range. These observations make the Au-Ag core-shell nanorods a good candidate for all-optical switching devices.

  19. Synthesis of 4H/fcc-Au@Metal Sulfide Core-Shell Nanoribbons.

    Science.gov (United States)

    Fan, Zhanxi; Zhang, Xiao; Yang, Jian; Wu, Xue-Jun; Liu, Zhengdong; Huang, Wei; Zhang, Hua

    2015-09-02

    Although great advances on the synthesis of Au-semiconductor heteronanostructures have been achieved, the crystal structure of Au components is limited to the common face-centered cubic (fcc) phase. Herein, we report the synthesis of 4H/fcc-Au@Ag2S core-shell nanoribbon (NRB) heterostructures from the 4H/fcc Au@Ag NRBs via the sulfurization of Ag. Remarkably, the obtained 4H/fcc-Au@Ag2S NRBs can be further converted to a novel class of 4H/fcc-Au@metal sulfide core-shell NRB heterostructures, referred to as 4H/fcc-Au@MS (M = Cd, Pb or Zn), through the cation exchange. We believe that these novel 4H/fcc-Au@metal sulfide NRB heteronanostructures may show some promising applications in catalysis, surface enhanced Raman scattering, solar cells, photothermal therapy, etc.

  20. Core-shell magnetic nanoparticles for on-chip RF inductors

    KAUST Repository

    Koh, Kisik

    2013-01-01

    FeNi3 based core-shell magnetic nanoparticles are demonstrated as the magnetic core material for on-chip, radio frequency (RF) inductors. FeNi3 nanoparticles with 50-150 nm in diameter with 15-20 nm-thick SiO2 coating are chemically synthesized and deposited on a planar inductor as the magnetic core to enhance both inductance (L) and quality factor (Q) of the inductor. Experimentally, the ferromagnetic resonant frequency of the on-chip inductors based on FeNi3 core-shell nanoparticles has been shown to be over several GHz. A post-CMOS process has been developed to integrate the magnetic nanoparticles to a planar inductor and inductance enhancements up to 50% of the original magnitude with slightly enhanced Q-factor up to 1 GHz have been achieved. © 2013 IEEE.

  1. Magnetic core-shell chitosan nanoparticles: rheological characterization and hyperthermia application.

    Science.gov (United States)

    Zamora-Mora, Vanessa; Fernández-Gutiérrez, Mar; San Román, Julio; Goya, Gerardo; Hernández, Rebeca; Mijangos, Carmen

    2014-02-15

    Stabilized magnetic nanoparticles are the subject of intense research for targeting applications and this work deals with the design, preparation and application of specific core-shell nanoparticles based on ionic crosslinked chitosan. The nanometric size of the materials was demonstrated by dynamic light scattering (DLS) and field emission scanning electron microscopy (FESEM) that also proved an increase of the size of chitosan nanoparticles (NPs) with the magnetite content. Steady oscillatory rheology measurements revealed a gel-like behavior of aqueous dispersions of chitosan NPs with concentrations ranging from 0.5% to 2.0% (w/v). The cytotoxicity of all the materials synthesized was analyzed in human fibroblasts cultures using the Alamar Blue and lactate dehydrogenase (LDH) assays. The measured specific power absorption under alternating magnetic fields (f = 580 kHz, H = 24 kA/m) indicated that magnetic core-shell chitosan NPs can be useful as remotely driven heaters for magnetic hyperthermia.

  2. The microwave properties of composites including lightweight core-shell ellipsoids

    Science.gov (United States)

    Yuan, Liming; Xu, Yonggang; Dai, Fei; Liao, Yi; Zhang, Deyuan

    2016-12-01

    In order to study the microwave properties of suspensions including lightweight core-shell ellipsoids, the calculation formula was obtained by substituting an equivalent ellipsoid for the original core-shell ellipsoid. Simulations for Fe-coated diatomite/paraffin suspensions were performed. Results reveal that the calculated results fitted the measured results very well when the inclusion concentration was no more than 15 vol%, but there was an obvious deviation when the inclusion concentration reached 24 vol%. By comparisons, the formula for less diluted suspensions was more suitable for calculating the electromagnetic parameter of suspensions especially when the ratio was smaller between the electromagnetic parameter of the inclusion and that of the host medium.

  3. Magnetic properties of mixed spin (1, 3/2) Ising nanoparticles with core-shell structure

    Science.gov (United States)

    Deviren, Bayram; Şener, Yunus

    2015-07-01

    The magnetic properties of mixed spin-1 and spin-3/2 Ising nanoparticles with core/shell structure are studied by using the effective-field theory with correlations. We investigate the thermal variations of the core, shell and total magnetizations and the Q-, R-, P-, S-, N- and L-types of compensation behavior in Néel classification nomenclature exists in the system. The effects of the crystal-field, core and shell interactions and interface coupling, on the phase diagrams are investigated in detail and the obtained phase diagrams are presented in three different planes. The system exhibits both second- and first-order phase transitions besides tricritical point, double critical end point, triple point and critical end point depending on the appropriate values of the interaction parameters. The system strongly affected by the surface situations and some characteristic phenomena are found depending on the ratio of the physical parameters in the surface shell and the core.

  4. Organic phase synthesis of noble metal-zinc chalcogenide core-shell nanostructures.

    Science.gov (United States)

    Kumar, Prashant; Diab, Mahmud; Flomin, Kobi; Rukenstein, Pazit; Mokari, Taleb

    2016-10-15

    Multi-component nanostructures have been attracting tremendous attention due to their ability to form novel materials with unique chemical, optical and physical properties. Development of hybrid nanostructures that are composed of metal-semiconductor components using a simple approach is of interest. Herein, we report a robust and general organic phase synthesis of metal (Au or Ag)-Zinc chalcogenide (ZnS or ZnSe) core-shell nanostructures. This synthetic protocol also enabled the growth of more compositionally complex nanostructures of Au-ZnSxSe1-x alloys and Au-ZnS-ZnSe core-shell-shell. The optical and structural properties of these hybrid nanostructures are also presented.

  5. Serrated Au/Pd Core/Shell Nanowires with Jagged Edges for Boosting Liquid Fuel Electrooxidation.

    Science.gov (United States)

    Zhang, Yu-Ling; Shen, Wen-Jin; Kuang, Wen-Tao; Guo, Shaojun; Li, Yong-Jun; Wang, Ze-Hong

    2017-06-09

    Integration of 1D, core/shell, and jagged features into one entity may provide a promising avenue for further enhancing catalyst performance. However, designing such unique nanostructures is extremely challenging. Herein, 1D serrated Au/Pd core/shell nanowires (CSNWs) with jagged edges were produced simply by a one-pot, dual-capping-agent-assisted method involving co-reduction, galvanic replacement, directional coalescence of preformed nanoparticles, and site-selective epitaxial growth of Pd. Au/PdCSNWs, compared with the commercially available Pd/C, exhibited enhanced electrocatalytic performance towards liquid fuel oxidation because of the synergistic effect of the electronic structure and low-coordinated jagged edges. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Polydopamine and MnO2 core-shell composites for high-performance supercapacitors

    Science.gov (United States)

    Hou, Ding; Tao, Haisheng; Zhu, Xuezhen; Li, Maoguo

    2017-10-01

    Polydopamine and MnO2 core-shell composites (PDA@MnO2) for high-performance supercapacitors had been successfully synthesized by a facile and fast method. The morphology, crystalline phase and chemical composition of PDA@MnO2 composites are characterized using SEM, TEM, XRD, EDS and XPS. The performance of PDA@MnO2 composites are further investigated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy in 1 M Na2SO4 electrolyte. The PDA@MnO2 core-shell nanostructure composites exhibit a high capacitance of 193 F g-1 at the current density of 1A g-1 and retained over 81.2% of its initial capacitance after 2500 cycles of charge-discharge at 2 A g-1. The results manifest that the PDA@MnO2 composites can be potentially applied in supercapacitors.

  7. Synthesis and characterization of ZnO/ZnS/MoS2 core-shell nanowires

    Science.gov (United States)

    Butanovs, Edgars; Kuzmin, Alexei; Butikova, Jelena; Vlassov, Sergei; Polyakov, Boris

    2017-02-01

    Hybrid nanostructures composed of layered materials have recently attracted a lot of attention due to their promising electronic and catalytic properties. In this study, we describe a novel synthesis strategy of ZnO/ZnS/MoS2 core-shell nanowire growth using a three-step route. First, ZnO nanowire array was grown on a silicon wafer. Second, the sample was immersed in ammonium molybdate solution and dried. At the third step, the sample was annealed in a sulfur atmosphere at 700 °C. Two solid state chemical reactions occur simultaneously during the annealing and result in a formation of ZnS and MoS2 phases. Produced ZnO/ZnS/MoS2 core-shell nanowires were characterized by scanning and transmission electron microscopy, whereas their chemical composition was confirmed by selected area electron diffraction and micro-Raman spectroscopy.

  8. Preparation, characterization and photocatalytic activity of TiO2/polyaniline core-shell nanocomposite

    Indian Academy of Sciences (India)

    Ali Olad; Sepideh Behboudi; Ali Akbar Entezami

    2012-10-01

    Polyaniline (PANI) as a promising conducting polymer has been used to prepare polyaniline/TiO2 (PANI/TiO2) nanocomposite with core-shell structure as photocatalyst. Titanium dioxide (TiO2) nanoparticles with an average crystal size of 21 nm were encapsulated by PANI via the in situ polymerization of aniline on the surface of TiO2 nanoparticles. FT–IR, UV-Vis-NIR, XRD, SEM and TEM techniques were used to characterize the PANI/TiO2 core-shell nanocomposite. Photocatalytic activity of PANI/TiO2 nanocomposite was investigated under both UV and visible light irradiations and compared with unmodified TiO2 nanoparticles. Results indicated deposition of PANI on the surface of TiO2 nanoparticles which improved the photocatalytic activity of pristine TiO2 nanoparticles.

  9. Enhanced photocatalytic activity of C@ZnO core-shell nanostructures and its photoluminescence property

    Science.gov (United States)

    Chen, Tao; Yu, Shanwen; Fang, Xiaoxin; Huang, Honghong; Li, Lun; Wang, Xiuyuan; Wang, Huihu

    2016-12-01

    An ultrathin layer of amorphous carbon coated C@ZnO core-shell nanostructures were synthesized via a facile hydrothermal carbonization process using glucose as precursor in this work. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance UV-vis spectroscopy (DRS) were used for the characterization of as-prepared samples. Photoluminescence (PL) properties of C@ZnO samples were investigated using PL spectroscopy. The microstructure analysis results show that the glucose content has a great influence on the size, morphology, crystallinity and surface chemical states of C@ZnO nanostructures. Moreover, the as-prepared C@ZnO core-shell nanostructures exhibit the enhanced photocatalytic activity and good photostability for methyl orange dye degradation due to its high adsorption ability and its improved optical characteristics.

  10. Ab Initio Study of 40Ca with an Importance Truncated No-Core Shell Model

    Energy Technology Data Exchange (ETDEWEB)

    Roth, R; Navratil, P

    2007-05-22

    We propose an importance truncation scheme for the no-core shell model, which enables converged calculations for nuclei well beyond the p-shell. It is based on an a priori measure for the importance of individual basis states constructed by means of many-body perturbation theory. Only the physically relevant states of the no-core model space are considered, which leads to a dramatic reduction of the basis dimension. We analyze the validity and efficiency of this truncation scheme using different realistic nucleon-nucleon interactions and compare to conventional no-core shell model calculations for {sup 4}He and {sup 16}O. Then, we present the first converged calculations for the ground state of {sup 40}Ca within no-core model spaces including up to 16{h_bar}{Omega}-excitations using realistic low-momentum interactions. The scheme is universal and can be easily applied to other quantum many-body problems.

  11. Cytoprotective alginate/polydopamine core/shell microcapsules in microbial encapsulation.

    Science.gov (United States)

    Kim, Beom Jin; Park, Taegyun; Moon, Hee Chul; Park, So-Young; Hong, Daewha; Ko, Eun Hyea; Kim, Ji Yup; Hong, Jong Wook; Han, Sang Woo; Kim, Yang-Gyun; Choi, Insung S

    2014-12-22

    Chemical encapsulation of microbes in threedimensional polymeric microcapsules promises various applications, such as cell therapy and biosensors, and provides a basic platform for studying microbial communications. However, the cytoprotection of microbes in the microcapsules against external aggressors has been a major challenge in the field of microbial microencapsulation, because ionotropic hydrogels widely used for microencapsulation swell uncontrollably, and are physicochemically labile. Herein, we developed a simple polydopamine coating for obtaining cytoprotective capability of the alginate capsule that encapsulated Saccharomyces cerevisiae. The resulting alginate/ polydopamine core/shell capsule was mechanically tough, prevented gel swelling and cell leakage, and increased resistance against enzymatic attack and UV-C irradiation. We believe that this multifunctional core/shell structure will provide a practical tool for manipulating microorganisms inside the microcapsules. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Iron-iron oxide core-shell nanoparticles synthesized by laser pyrolysis followed by superficial oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Dumitrache, F. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania)]. E-mail: fdumit@inflpr.ro; Morjan, I. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Alexandrescu, R. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Ciupina, V. [' Ovidius' University of Constanta, Bd. Mamaia 124, Constanta (Romania); Prodan, G. [' Ovidius' University of Constanta, Bd. Mamaia 124, Constanta (Romania); Voicu, I. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Fleaca, C. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Albu, L. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Savoiu, M. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Sandu, I. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Popovici, E. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania); Soare, I. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, 077125 Bucharest (Romania)

    2005-07-15

    Iron-based core-shell nanostructures were synthesized by laser pyrolysis in a two-steps procedure. In a first step, using a cross-flow configuration, the laser radiation was heating a gas phase mixture containing iron pentacarbonyl (vapors) entrained by an ethylene flow, which plays also the role of an energy transfer agent. Secondly, a carefully controlled in situ passivation of the freshly formed pyrophoric iron nanoparticles created a protective iron oxide shell. The produced nanoparticles (22 nm size diameters) with core-shell features were analyzed by TEM, XRD, SAED and Raman spectroscopy. Majoritary iron and gamma iron oxide/magnetite and minoritary carbon phases were identified. In laser pyrolysis experiments in which the reaction temperature was increased, the catalyzed homogeneous nucleation and growth of carbon nanotubes in the gas phase was observed and is presented here for the first time.

  13. Iron iron oxide core shell nanoparticles synthesized by laser pyrolysis followed by superficial oxidation

    Science.gov (United States)

    Dumitrache, F.; Morjan, I.; Alexandrescu, R.; Ciupina, V.; Prodan, G.; Voicu, I.; Fleaca, C.; Albu, L.; Savoiu, M.; Sandu, I.; Popovici, E.; Soare, I.

    2005-07-01

    Iron-based core-shell nanostructures were synthesized by laser pyrolysis in a two-steps procedure. In a first step, using a cross-flow configuration, the laser radiation was heating a gas phase mixture containing iron pentacarbonyl (vapors) entrained by an ethylene flow, which plays also the role of an energy transfer agent. Secondly, a carefully controlled in situ passivation of the freshly formed pyrophoric iron nanoparticles created a protective iron oxide shell. The produced nanoparticles (22 nm size diameters) with core-shell features were analyzed by TEM, XRD, SAED and Raman spectroscopy. Majoritary iron and gamma iron oxide/magnetite and minoritary carbon phases were identified. In laser pyrolysis experiments in which the reaction temperature was increased, the catalyzed homogeneous nucleation and growth of carbon nanotubes in the gas phase was observed and is presented here for the first time.

  14. One-dimensional ZnS-based Hetero-, Core/shell and Hierarchical Nanostructures

    Institute of Scientific and Technical Information of China (English)

    Xiaosheng FANG; Ujjal K.Gautam; Yoshio BANDO; Dmitri GOLBERG

    2008-01-01

    A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multifunctionality into a single system, the utilization of hetero-, core/shell and hierarchical nanostructures has become the key issue for building such devices. ZnS, due to its direct wide bandgap, high index of refraction, high transparency in the visible range and intrinsic polarity, is one of the most useful semiconductors for a wide range of electronics applications. This article provides a dense review of the state-of-the-art research activities in one-dimensional (1D) ZnS-based hetero-, core/shell and hierarchical nanostructures. The particular emphasis is put on their syntheses and applications.

  15. Porous core-shell carbon fibers derived from lignin and cellulose nanofibrils

    KAUST Repository

    Xu, Xuezhu

    2013-10-01

    This letter reports a method to produce lignin and cellulose nanofibrils (CNFs) based porous core-shell carbon fibers via co-electrospinning followed by controlled carbonization. Lignin formed the shell of the fiber while CNF network formed the porous core. Polyacrylonitrile (PAN) was added to the lignin solution to increase its electrospinability. CNFs were surface acetylated and dispersed in silicon oil to obtain a homogenous dispersion for electrospinning the porous core. Hollow lignin fibers were also electrospun using glycerin as the core material. FT-IR measurements confirmed the CNF acetylation. SEM micrographs showed the core-shell and hollow fiber nanostructures before and after carbonization. The novel carbon fibers synthesized in this study exhibited increased surface area and porosity that are promising for many advanced applications. © 2013 Elsevier B.V.

  16. Manipulated electromagnetic losses by integrating chemically heterogeneous components in Fe-based core/shell architecture

    Science.gov (United States)

    Huang, Hao; Zhang, Xue-Feng; Lv, Bo; Xue, Fang-Hong; Shah, Asif; Su, Lei; Yan, Jing-Guo; Yao, Man; Dong, Xing-Long

    2013-02-01

    Existing techniques for stabilizing and functionalizing metal nanostructures required precise control of complex procedures and probably introduce undesirable impurities. We herein report an arc-discharge chemical vapor deposition strategy for the synthesis of chemically heterogeneous core/shell metal/oxide nanocapsules Fe/TiFe2O4, Fe/MnFe2O4, and Fe/Al2O3. A universal formation mechanism based on the co-effect of oxygen potential and surface energy is further proposed, derived from fundamental thermodynamics. Such core/shell nanocapsules, integrated with tunable components, present an effective manipulability of microwave absorption at expected frequency, originating from the various dielectric behaviors of the heterogeneous oxide shells.

  17. Synthesis and Surface Properties of Silica Spheres with Core Shell Structure by One Convenient Method

    Directory of Open Access Journals (Sweden)

    D. P. Das

    2009-01-01

    Full Text Available Earlier, we have published a paper on the preparation of silica sphere using propanol as cosurfactant. We report here a highly cost-effective method of preparation of mesoporous silica spheres with core shell structure using sodium silicate as silica precursor, cetyltrimethyl ammonium bromide (CTAB as surfactant, and methanol as cosurfactant. Thus after removal of the template by dissolutions or/and activation at higher temperature, mesoporous silica spheres with core shell structure were obtained. The products prepared with methanol to CTAB molar ratio 8.5 : 1 were confirmed to give best results. All the spherical products have very large surface area (∼589–1044 m2/g, pore volume (∼0.98–1.41 cm3/g, and ordered pore structure.

  18. Determining the size of nanoparticles in the example of magnetic iron oxide core-shell systems

    Science.gov (United States)

    Jarzębski, Maciej; Kościński, Mikołaj; Białopiotrowicz, Tomasz

    2017-08-01

    The size of nanoparticles is one of the most important factors for their possible applications. Various techniques for the nanoparticle size characterization are available. In this paper selected techniques will be considered base on the prepared core-shell magnetite nanoparticles. Magnetite is one of the most investigated and developed magnetic material. It shows interesting magnetic properties which can be used for biomedical applications, such as drug delivery, hypothermia and also as a contrast agent. To reduce the toxic effects of Fe3O4, magnetic core was covered by dextran and gelatin. Moreover, the shell was doped by fluorescent dye for confocal microscopy investigation. The main investigation focused on the methods for particles size determination of modified magnetite nanoparticles prepared with different techniques. The size distribution were obtained by nanoparticle tracking analysis, dynamic light scattering and transmission electron microscopy. Furthermore, fluorescent correlation spectroscopy (FCS) and confocal microscopy were used to compare the results for particle size determination of core-shell systems.

  19. Microwave-assisted synthesis of water-dispersed CdTe/CdSe core/shell type II quantum dots

    OpenAIRE

    Sai Li-Man; Kong Xiang Yang

    2011-01-01

    Abstract A facile synthesis of mercaptanacid-capped CdTe/CdSe (core/shell) type II quantum dots in aqueous solution by means of a microwave-assisted approach is reported. The results of X-ray diffraction and high-resolution transmission electron microscopy revealed that the as-prepared CdTe/CdSe quantum dots had a core/shell structure with high crystallinity. The core/shell quantum dots exhibit tunable fluorescence emissions by controlling the thickness of the CdSe shell. The photoluminescent...

  20. Recent Advancement in Functional Core-Shell Nanoparticles of Polymers: Synthesis, Physical Properties, and Applications in Medical Biotechnology

    Directory of Open Access Journals (Sweden)

    K. Santhosh Kumar

    2013-01-01

    Full Text Available This paper covers the core-shell nanomaterials, mainly, polymer-core polymer shell, polymer-core metal shell, and polymer-core nonmetal shells. Herein, various synthesis techniques, properties, and applications of these materials have been discussed. The detailed discussion of the properties with experimental parameters has been carried out. The various characterization techniques for the core-shell nanostructure have also been discussed. Their physical and chemical properties have been addressed. The future aspects of such core-shell nanostructures for biomedical and various other applications have been discussed with a special emphasis on their properties.

  1. Public regulators and CSR

    DEFF Research Database (Denmark)

    Buhmann, Karin

    2016-01-01

    for responsible business conduct, connecting to social expectations and bridging to public regulation. This UN guidance has had a significant bearing on how public regulators seek to influence business conduct beyond Human Rights to broader Corporate Social Responsibility (CSR) concerns. Drawing on examples...... of such public regulatory governance, this article explores and explains developments towards a juridification of CSR entailing efforts by public regulators to reach beyond jurisdictional and territorial limitations of conventional public law to address adverse effects of transnational economic activity. Through...

  2. Multifunctional Core-Shell and Nano-channel Design for Nano-sized Thermo-sensor

    Science.gov (United States)

    2015-04-01

    L R E P O R T DTRA-TR-14-32 Multifunctional Core-Shell and Nano- channel Design for Nano-sized Thermo - sensor Distribution Statement A... Thermo -sensor PI: Jie Lian, Associate Professor, Department of Mechanical, Aerospace & Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, NY...within s time frame. (2) Scope This project is under the scope of Basic and Applied Sciences Directorate and the JSTO and Nano-sized Thermo -sensor

  3. Simulating the co-encapsulation of drugs in a "smart" core-shell-shell polymer nanoparticle.

    Science.gov (United States)

    Buxton, Gavin A

    2014-03-01

    A coarse-grained lattice Monte Carlo method is used to simulate co-encapsulation and delivery of both a hydrophilic and hydrophobic drug from polymer nanoparticles. In particular, core-shell-shell polymer nanoparticles with acid-labile bonds are simulated, and the preferential release of the encapsulated drugs near more acidic tumors is captured. While these simple models lack the molecular details of a real system, they can reveal interesting insights concerning the effects of entropy and enthalpy in these systems.

  4. MAGNETIC CORE SHELL STRUCTURES: from 0D to 1D assembling.

    Science.gov (United States)

    Ficai, Denisa; Ficai, Anton; Dinu, Elena; Oprea, Ovidiu; Sonmez, Maria; Keler, Memduh Kagan; Sahin, Yesim Muge; Ekren, Nazmi; Inan, Ahmet Talat; Daglilar, Sibel; Gunduz, Oguzhan

    2015-01-01

    Material research and development studies are focused on different techniques of bringing out nanomaterials with desired characteristics and properties. From the point of view of materials development, nowadays scientists are strongly focused on obtaining materials with predefined characteristics and properties. The morphology control seems to be a determinant factor and increasing attention is devoted to this aspect. At this moment it is possible to engineer the material's features by using different methods and materials combination for both medical and industrial applications. In the applications of chemistry and synthesis, biology, mechanics, optics solar cells and microelectronics tailoring the adjustable parameters of stoichiometry, chemical structure, shape and segregation are evaluated and opens new fields. Because of the magnetic features of nanoparticles and durable particle size, less than 100 nm, this study is aiming to describe their uses in practical applications. That's why the whole hydrodynamic magnetic core shell topic will be reviewed on this paper. Additionally, the properties acting in general sight in solid-state physics are utilized for material selection and for defining issue connecting the core, shell structure and their producing properties. Here, in the study of core/shell nanoparticle various physical and chemical synthesis routes and the effect of electrospun method are briefly discussed. Starting from a real void of the scientific literature, the existent data related to the 1D magnetic electrospun materials are reviewed. The perspectives in the medical, environmental or energetic sector is great and bring some real advantages related to the 0D core@shell structures because both mechanical and biological properties are dependent on the morphology of the materials.

  5. Core-shell Au@(TiO(2), SiO(2)) nanoparticles with tunable morphology.

    Science.gov (United States)

    Lekeufack, D Djoumessi; Brioude, A; Mouti, A; Alauzun, J G; Stadelmann, P; Coleman, A W; Miele, P

    2010-07-07

    A novel approach based on the Stöber method allows breaking of the symmetry of core-shell systems based on metallic core and metal oxide shell. By adjusting the proportion of the TiO(2) precursor with regard to the silica precursor, different morphologies of the particles have been obtained displacing the gold particle from center to eccentric positions leading to acorn-like and raspberry-like structure.

  6. Fabrication of monodisperse FePt rate at Au core-shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Wei, D.H. [Institute of Physics, Academia Sinica, Taipei 115 (China); Hung, D.S. [Department of Information and Telecommunications Engineering, Ming Chuan University, Taipei 111 (China); Ho, C.S.; Wang, J.W. [Department of Chemical Engineering, Tunghai University, Taichung 407 (China); Yao, Y.D. [Department of Materials Engineering, Tatung University, Taipei 104 (China)

    2007-12-15

    Hydrophobic FePt rate at Au core-shell nanoparticles were chemically synthesized and with controllable surface-function properties. The enhanced optical property is due to the contribution of Au shell. The surface modification of FePt rate at Au nanoiparticles by using 11-mercaptoundecanoic acid (MUA) was hydrophilic through ligand exchange and with good biocompatibility for future multi-functional applications. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. Core-Shell Structure and Photoluminescence of CdS Quantum Dots

    Institute of Scientific and Technical Information of China (English)

    邹炳锁; 武振羽; 曹立; 戴建华; 张泽勃; 聂玉昕; 解思深

    2001-01-01

    A double-potential-well model is proposed to describe the core-shell thickness-dependent photoluminescence peaks and energy relaxations in semiconductor quantum dots (QDs). The surface effect plays an important role in the formation of new states-polaronic states around the surface of QDs. The polaronic states formed emit light due to the strong interaction between the core state (confined state) and the surface state with an enhanced participation of the size effect.

  8. Gap state related blue light emitting boron-carbon core shell structures

    Science.gov (United States)

    Singh, Paviter; Kaur, Manpreet; Singh, Bikramjeet; Kaur, Gurpreet; Singh, Kulwinder; Kumar, Manjeet; Bala, Rajni; Thakur, Anup; Kumar, Akshay

    2016-05-01

    Boron- carbon core shell structures have been synthesized by solvo-thermal synthesis route. The synthesized material is highly pure. X-ray diffraction analysis confirms the reduction of reactants in to boron and carbon. Scanning Electron Microscopy (SEM) analysis showed that the shell is uniform with average thickness of 340 nm. Photo luminescence studies showed that the material is blue light emitting with CIE color coordinates: x=0.16085, y=0.07554.

  9. How to Determine the Core-Shell Nature in Bimetallic Catalyst Particles?

    Directory of Open Access Journals (Sweden)

    Emma Westsson

    2014-11-01

    Full Text Available Nanometer-sized materials have significantly different chemical and physical properties compared to bulk material. However, these properties do not only depend on the elemental composition but also on the structure, shape, size and arrangement. Hence, it is not only of great importance to develop synthesis routes that enable control over the final structure but also characterization strategies that verify the exact nature of the nanoparticles obtained. Here, we consider the verification of contemporary synthesis strategies for the preparation of bimetallic core-shell particles in particular in relation to potential particle structures, such as partial absence of core, alloying and raspberry-like surface. It is discussed what properties must be investigated in order to fully confirm a covering, pin-hole free shell and which characterization techniques can provide such information. Not uncommonly, characterization strategies of core-shell particles rely heavily on visual imaging like transmission electron microscopy. The strengths and weaknesses of various techniques based on scattering, diffraction, transmission and absorption for investigating core-shell particles are discussed and, in particular, cases where structural ambiguities still remain will be highlighted. Our main conclusion is that for particles with extremely thin or mono-layered shells—i.e., structures outside the limitation of most imaging techniques—other strategies, not involving spectroscopy or imaging, are to be employed. We will provide a specific example of Fe-Pt core-shell particles prepared in bicontinuous microemulsion and point out the difficulties that arise in the characterization process of such particles.

  10. Theoretical studies of preparation of core-shell nanoparticles by electrochemical metal deposition

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, O.A.; Mariscal, M.M. [INFIQC, Departamento de Matematica y Fisica, Facultad de Ciencias Quimicas, Universidad Nacional de Cordoba, Cordoba (Argentina); Leiva, E.P.M., E-mail: eleiva@fcq.unc.edu.a [INFIQC, Departamento de Matematica y Fisica, Facultad de Ciencias Quimicas, Universidad Nacional de Cordoba, Cordoba (Argentina)

    2010-11-30

    In the present work we discuss the statistical mechanical framework for predicting the decoration of metallic nanoparticles using electrochemical methods, in thermodynamic equilibrium. It is found that depending on the interactions between the two metals, controlled decoration may be achieved for core-shell nanoparticles in undersaturation and oversaturation conditions. The concept of underpotential deposition is discussed for the case of nanoparticles, with the finding that this phenomenon may be size dependent.

  11. Lanthanide modification of CdSe/ZnS core/shell quantum dots

    DEFF Research Database (Denmark)

    Dethlefsen, Johannes Rytter; Mikhailovsky, Alexander A.; Burks, Peter T.

    2012-01-01

    Lanthanide-modified CdSe quantum dots (CdSe(Ln) QDs) have been prepared by heating a solution of Cd(oleate)(2), SeO2, and Ln(bipy)(S2CNEt2)(3) (bipy = 2,2'-bipyridine) to 180-190 degrees C for 10-15 min. The elemental compositions of the resulting CdSe(Ln) cores and CdSe(Ln)/ZnS core/shell QDs show...

  12. Electronic structure and intersubband magnetoabsorption spectra of CdSe/CdS core-shell nanowires

    Science.gov (United States)

    Xiong, Wen

    2016-10-01

    The electronic structures of CdSe/CdS core-shell nanowires are calculated based on the effective-mass theory, and it is found that the hole states in CdSe/CdS core-shell nanowires are strongly mixed, which are very different from the hole states in CdSe or CdS nanowires. In addition, we find the three highest hole states at the Γ point are almost localized in the CdSe core and the energies of the hole states in CdSe/CdS core-shell nanowires can be enhanced greatly when the core radius Rc increases and the total radius R is fixed. The degenerate hole states are split by the magnetic field, and the split energies will increase when |Jh | increases from 1/2 to 7/2, while they are almost not influenced by the change of the core radius Rc. The absorption spectra of CdSe/CdS core-shell nanowires at the Γ point are also studied in the magnetic field when the temperature T is considered, and we find there are only two peaks will arise if the core radius Rc and the temperature T increase. The intensity of each optical absorption can be considerably enhanced by increasing the core radius Rc when the temperature T is fixed, it is due to the increase of their optical transition matrix element. Meanwhile, the intensity of each optical absorption can be decreased when the temperature T increases and the core radius Rc is fixed, and this is because the Fermi-Dirac distribution function of the corresponding hole states will increase as the increase of the temperature T.

  13. Directed Fluid Flow Produced by Arrays of Magnetically Actuated Core-Shell Biomimetic Cilia

    Science.gov (United States)

    Fiser, B. L.; Shields, A. R.; Evans, B. A.; Superfine, R.

    2010-03-01

    We have developed a novel core-shell microstructure that we use to fabricate arrays of flexible, magnetically actuated biomimetic cilia. Our biomimetic cilia mimic the size and beat shape of biological cilia in order to replicate the transport of fluid driven by cilia in many biological systems including the determination of left-right asymmetry in the vertebrate embryonic nodal plate and mucociliary clearance in the lung. Our core-shell structures consist of a flexible poly(dimethylsiloxane) (PDMS) core surrounded by a shell of nickel approximately forty nanometers thick; by using a core-shell structure, we can tune the mechanical and magnetic properties independently. We present the fabrication process and the long-range transport that occurs above the beating biomimetic cilia tips and will report on progress toward biomimetic cilia induced flow in viscoelastic fluids similar to mucus in the human airway. These flows may have applications in photonics and microfluidics, and our structures may be further useful as sensors or actuators in microelectromechanical systems.

  14. Coherently Strained Si-SixGe1-x Core-Shell Nanowire Heterostructures.

    Science.gov (United States)

    Dillen, David C; Wen, Feng; Kim, Kyounghwan; Tutuc, Emanuel

    2016-01-13

    Coherently strained Si-SixGe1-x core-shell nanowire heterostructures are expected to possess a positive shell-to-core conduction band offset, allowing for quantum confinement of electrons in the Si core. We report the growth of epitaxial, coherently strained Si-SixGe1-x core-shell heterostructures through the vapor-liquid-solid mechanism for the Si core, followed in situ by the epitaxial SixGe1-x shell growth using ultrahigh vacuum chemical vapor deposition. The Raman spectra of individual nanowires reveal peaks associated with the Si-Si optical phonon mode in the Si core and the Si-Si, Si-Ge, and Ge-Ge vibrational modes of the SixGe1-x shell. The core Si-Si mode displays a clear red-shift compared to unstrained, bare Si nanowires thanks to the lattice mismatch-induced tensile strain, in agreement with calculated values using a finite-element continuum elasticity model combined with lattice dynamic theory. N-type field-effect transistors using Si-SixGe1-x core-shell nanowires as channel are demonstrated.

  15. Ablation characteristics of electrospun core-shell nanofiber by femtosecond laser.

    Science.gov (United States)

    Park, ChangKyoo; Xue, Ruipeng; Lannutti, John J; Farson, Dave F

    2016-08-01

    This study examined the femtosecond laser ablation properties of core and shell polymers their relationship to the ablation characteristics of core-shell nanofibers. The single-pulse ablation threshold of bulk polycaprolactone (PCL) was measured to be 2.12J/cm(2) and that of bulk polydimethylsiloxane (PDMS) was 4.07J/cm(2). The incubation coefficients were measured to be 0.82±0.02 for PCL and 0.53±0.03 for PDMS. PDMS-PCL core-shell and pure PCL nanofibers were fabricated by electrospinning. The energy/volume of pure PCL and PDMS-PCL core-shell nanofiber ablation was investigated by measuring linear ablation grooves made at different scanning speeds. At large scanning speed, higher energy/volume was required for machining PDMS-PCL nanofiber than for PCL nanofiber. However, at small scanning speed, comparable energy/volume was measured for PDMS-PCL and PCL nanofiber ablation. Additionally, in linear scanned ablation of PDMS-PCL fibers at small laser pulse energy and large scanning speed, there were partially ablated fibers where the shell was ablated but the core remained. This was attributed to the lower ablation threshold of the shell material.

  16. Coercivity enhancement in Ce-Fe-B based magnets by core-shell grain structuring

    Directory of Open Access Journals (Sweden)

    M. Ito

    2016-05-01

    Full Text Available Ce-based R2Fe14B (R= rare-earth nano-structured permanent magnets consisting of (Ce,Nd2Fe14B core-shell grains separated by a non-magnetic grain boundary phase, in which the relative amount of Nd to Ce is higher in the shell of the magnetic grain than in its core, were fabricated by Nd-Cu infiltration into (Ce,Nd2Fe14B hot-deformed magnets. The coercivity values of infiltrated core-shell structured magnets are superior to those of as-hot-deformed magnets with the same overall Nd content. This is attributed to the higher value of magnetocrystalline anisotropy of the shell phase in the core-shell structured infiltrated magnets compared to the homogeneous R2Fe14B grains of the as-hot-deformed magnets, and to magnetic isolation of R2Fe14B grains by the infiltrated grain boundary phase. First order reversal curve (FORC diagrams suggest that the higher anisotropy shell suppresses initial magnetization reversal at the edges and corners of the R2Fe14B grains.

  17. Magnetite/poly(alkylcyanoacrylate) (core/shell) nanoparticles as 5-Fluorouracil delivery systems for active targeting.

    Science.gov (United States)

    Arias, José L; Gallardo, Visitación; Ruiz, M A Adolfina; Delgado, Angel V

    2008-05-01

    In this article, a reproducible emulsion polymerization process is described to prepare core/shell colloidal nanospheres, loaded with 5-Fluorouracil, and consisting of a magnetic core (magnetite) and a biodegradable polymeric shell [poly(ethyl-2-cyanoacrylate), poly(butylcyanoacrylate), poly(hexylcyanoacrylate), or poly(octylcyanoacrylate)]. The heterogeneous structure of these carriers can confer them both the possibility of being used as drug delivery systems and the responsiveness to external magnetic fields, allowing an active drug targeting without a concurrent systemic distribution. Zeta potential determinations as a function of ionic strength showed that the surface behaviour of the core/shell particles is similar to that of pure cyanoacrylate particles. The first magnetization curve of both magnetite and magnetite/polymer particles demonstrated that the polymer shell reduces the magnetic responsiveness of the particles, but keeps unchanged their ferrimagnetic character. Two drug loading mechanisms were studied: absorption or entrapment in the polymeric network, and surface adsorption. We found that the acidity of the medium had significant effects on the drug absorption per unit mass of polymer, and needs to be controlled to avoid formation of macroaggregates and to reach significant 5-Fluorouracil absorption. The type of polymer and the drug concentration are also main factors determining the drug incorporation to the core/shell particles. 5-Fluorouracil release evaluations showed a biphasic profile affected by the type of polymeric shell, the type of drug incorporation and the amount of drug loaded.

  18. Localized surface plasmon mediated energy transfer in the vicinity of core-shell nanoparticle

    Science.gov (United States)

    Shishodia, Manmohan Singh; Juneja, Soniya

    2016-05-01

    Multipole spectral expansion based theory of energy transfer interactions between a donor and an acceptor molecule in the vicinity of a core-shell (nanoshell or core@shell) based plasmonic nanostructure is developed. In view of the diverse applications and rich plasmonic features such as tuning capability of surface plasmon (SP) frequencies, greater sensitivity to the change of dielectric environment, controllable redirection of electromagnetic radiation, closed form expressions for Energy Transfer Rate Enhancement Factor (ETREF) near core-shell particle are reported. The dependence of ETREF on different parameters is established through fitting equations, perceived to be of key importance for developing appropriate designs. The theoretical approach developed in the present work is capable of treating higher order multipoles, which, in turn, are also shown to play a crucial role in the present context. Moreover, closed form expressions derived in the present work can directly be used as formula, e.g., for designing SP based biosensors and estimating energy exchange between proteins and excitonic interactions in quantum dots.

  19. Synthesis and characterization of ZnSe:Fe/ZnSe core/shell nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Lin; Zhu, Jianguo, E-mail: yanglin_1028@163.com; Xiao, Dingquan

    2014-04-15

    High-quality ZnSe:Fe/ZnSe core/shell nanocrystals were prepared via a hydrothermal microemulsion technique. Effective surface passivation of monodisperse ZnSe:Fe nanocrystals is achieved by overcoating them with a ZnSe shell. The samples were characterized by means of XRD, EDX, TEM, PSD, XPS, photoluminescence, and Raman spectrum. The results show that the as-synthesized nanocrystals are cubic zinc blende ZnSe structure with high purity and the average particle size of ZnSe:Fe/ZnSe core/shell nanocrystal is larger than that of ZnSe:Fe core. The growth of ZnSe shell causes a small red shift in PL spectra, and then the PL quantum yield (QY) increases from 16% before shell growth to the maximum of 37% after increasing shell thickness up to 1.2 monolayers (ML). Moreover, both transverse optic (TO) and longitudinal optic (LO) phonon modes of ZnSe are shifted toward lower frequency as compared with the reported ones. -- Highlights: • ZnSe:Fe/ZnSe core/shell QDs were prepared by a hydrothermal microemulsion method. • ZnSe shell efficiently passivates surface defects by serving as a physical barrier. • The particle size and PL properties can be turned with the growth of ZnSe shell. • The luminescence efficiency and stability of QDs could be improved in this manner.

  20. Au/SiO2/QD core/shell/shell nanostructures with plasmonic-enhanced photoluminescence

    Science.gov (United States)

    Yang, Ping; Kawasaki, Kazunori; Ando, Masanori; Murase, Norio

    2012-09-01

    A sol-gel method has been developed to fabricate Au/SiO2/quantum dot (QD) core-shell-shell nanostructures with plasmonic-enhanced photoluminescence (PL). Au nanoparticle (NP) was homogeneously coated with a SiO2 shell with adjusted thickness through a Stöber synthesis. When the toluene solution of hydrophobic CdSe/ZnS QDs was mixed with partially hydrolyzed 3-aminopropyltrimethoxysilane (APS) sol, the ligands on the QDs were replaced by a thin functional SiO2 layer because the amino group in partially hydrolyzed APS has strong binding interaction with the QDs. Partially hydrolyzed APS plays an important role as a thin functional layer for the transfers of QDs to water phase and the subsequent connection to aqueous SiO2-coated Au NPs. Although Au NPs were demonstrated as efficient PL quenchers when the SiO2 shell on the Au NPs is thin (less than 5 nm), we found that precise control of the spacing between the Au NP core and the QD shell resulted in QDs with an enhancement of 30 % of PL efficiency. The Au/SiO2/QD core/shell/shell nanostructures also reveal strong surface plasmon scattering, which makes the Au/SiO/QD core-shell-shell nanostructures an excellent dual-modality imaging probe. This technology can serve as a general route for encapsulating a variety of discrete nanomaterials because monodispersed nanostructures often have a similar surface chemistry.

  1. Design and optimization of Ag-dielectric core-shell nanostructures for silicon solar cells

    Directory of Open Access Journals (Sweden)

    Feng-Xiang Chen

    2015-09-01

    Full Text Available Metal-dielectric core-shell nanostructures have been proposed as a light trapping scheme for enhancing the optical absorption of silicon solar cells. As a potential application of such enhanced effects, the scattering efficiencies of three core-shell structures (Ag@SiO2, Ag@TiO2, and Ag@ZrO2 are discussed using the Mie Scattering theory. For compatibility with experiment results, the core diameter and shell thickness are limited to 100 and 30 nm, respectively, and a weighted scattering efficiency is introduced to evaluate the scattering abilities of different nanoparticles under the solar spectrum AM 1.5. The simulated results indicate that the shell material and thickness are two key parameters affecting the weighted scattering efficiency. The SiO2 is found to be an unsuitable shell medium because of its low refractive index. However, using the high refractive index mediumTiO2 in Ag@TiO2 nanoparticles, only the thicker shell (30 nm is more beneficial for light scattering. The ZrO2 is an intermediate refractive index material, so Ag@ZrO2 nanoparticles are the most effective core-shell nanostructures in these silicon solar cells applications.

  2. Green synthesis of near infrared core/shell quantum dots for photocatalytic hydrogen production

    Science.gov (United States)

    Zhao, Haiguang; Jin, Lei; Zhou, Yufeng; Bandar, AlOtaibi; Fan, Zhiyuan; Govorov, Alexander O.; Mi, Zetian; Sun, Shuhui; Rosei, Federico; Vomiero, Alberto

    2016-12-01

    Quantum dots (QDs) are attractive systems for potential applications in future solar energy technologies, due to their optical properties which are tunable as a function of size and composition. In this study, we synthesized PbS QDs with first excitonic peak in the range 1060 to 1300 nm using a PbCl2/sulfur molar ratio of 10:1. The first excitonic absorption peak from 1300 to 950 nm of the PbS/CdS core/shell QDs can be further synthesized via the cation exchange approach. Our method resulted in high quantum yield, good stability, monodisperse QD solutions with a full surface coverage by excess Cd cations. In addition, we used our core/shell QDs in a photoelectrochemical cell for hydrogen generation. This heterostructure exhibited a saturated photocurrent as high as 3.3 mA cm-2, leading to ˜29 ml cm-2 d-1 hydrogen generation, indicating the strong potential of our core/shell QDs for applications in water splitting.

  3. Synthesis and characterization of core-shell Fe3O4-gold-chitosan nanostructure

    Directory of Open Access Journals (Sweden)

    Salehizadeh Hossein

    2012-01-01

    Full Text Available Abstract Background Fe3O4-gold-chitosan core-shell nanostructure can be used in biotechnological and biomedical applications such as magnetic bioseparation, water and wastewater treatment, biodetection and bioimaging, drug delivery, and cancer treatment. Results Magnetite nanoparticles with an average size of 9.8 nm in diameter were synthesized using the chemical co-precipitation method. A gold-coated Fe3O4 monotonous core-shell nanostructure was produced with an average size of 15 nm in diameter by glucose reduction of Au3+ which is then stabilized with a chitosan cross linked by formaldehyde. The results of analyses with X-ray diffraction (XRD, Fourier Transformed Infrared Spectroscopy (FTIR, Transmission Electron Microscopy (TEM, and Atomic Force Microscopy (AFM indicated that the nanoparticles were regularly shaped, and agglomerate-free, with a narrow size distribution. Conclusions A rapid, mild method for synthesizing Fe3O4-gold nanoparticles using chitosan was investigated. A magnetic core-shell-chitosan nanocomposite, including both the supermagnetic properties of iron oxide and the optical characteristics of colloidal gold nanoparticles, was synthesized.

  4. Structural and Magnetic Response in Bimetallic Core/Shell Magnetic Nanoparticles

    Directory of Open Access Journals (Sweden)

    Adeela Nairan

    2016-04-01

    Full Text Available Bimagnetic monodisperse CoFe2O4/Fe3O4 core/shell nanoparticles have been prepared by solution evaporation route. To demonstrate preferential coating of iron oxide onto the surface of ferrite nanoparticles X-ray diffraction (XRD, High resolution transmission electron microscope (HR-TEM and Raman spectroscopy have been performed. XRD analysis using Rietveld refinement technique confirms single phase nanoparticles with average seed size of about 18 nm and thickness of shell is 3 nm, which corroborates with transmission electron microscopy (TEM analysis. Low temperature magnetic hysteresis loops showed interesting behavior. We have observed large coercivity 15.8 kOe at T = 5 K, whereas maximum saturation magnetization (125 emu/g is attained at T = 100 K for CoFe2O4/Fe3O4 core/shell nanoparticles. Saturation magnetization decreases due to structural distortions at the surface of shell below 100 K. Zero field cooled (ZFC and Field cooled (FC plots show that synthesized nanoparticles are ferromagnetic till room temperature and it has been noticed that core/shell sample possess high blocking temperature than Cobalt Ferrite. Results indicate that presence of iron oxide shell significantly increases magnetic parameters as compared to the simple cobalt ferrite.

  5. Controllable synthesis, characterization and optical properties of colloidal PbS/gelatin core-shell nanocrystals.

    Science.gov (United States)

    Mozafari, Masoud; Moztarzadeh, Fathollah

    2010-11-15

    Native quantum dots (QDs) made up of semiconductor nanocrystals (NCs) are toxic in nature but due to their excellent optical properties, they have proven themselves to be an attractive choice in biological labeling and targeting. In order to improve the general biocompatibility of lead sulfide (PbS) NCs, we present a new and simple procedure for preparing PbS/gelatin core-shell nanoparticles cross-linked with glutaraldehyde (GA) molecules. The phase composition, morphology, luminescence and in vitro photostability of the samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), transmission electron microscope (TEM) and fluorescence spectroscopy, respectively. The XRD analysis showed that the PbS NCs were of the cubic structure, the mean crystallite size was calculated to be 13.5 nm and the calculated lattice constant using Bragg's equation was 0.5950 nm, which was very close to its value in the standard card (JCPDS No. 5-592). In vitro test revealed that compared with bare PbS NCs, the photostability of the core-shell nanostructure remarkably improved. In addition, possible formation mechanisms of the PbS/gelatin nanoparticles were discussed in detail. Consequently, the advantages of high stability as well as high fluorescent intensity and biocompatibility make the core-shell nanoparticles promising candidates for in vivo biological targeting applications.

  6. Core-shell fibrous stem cell carriers incorporating osteogenic nanoparticulate cues for bone tissue engineering.

    Science.gov (United States)

    Olmos Buitrago, Jennifer; Perez, Roman A; El-Fiqi, Ahmed; Singh, Rajendra K; Kim, Joong-Hyun; Kim, Hae-Won

    2015-12-01

    Moldable hydrogels that incorporate stem cells hold great promise for tissue engineering. They secure the encapsulated cells for required periods while allowing a permeable exchange of nutrients and gas with the surroundings. Core-shell fibrous structured hydrogel system represents these properties relevant to stem cell delivery and defect-adjustable tissue engineering. A designed dual concentric nozzle is used to simultaneously deposit collagen and alginate with a core-shell structured continuous fiber form in the ionic calcium bath. We aimed to impart extrinsic osteogenic cues in the nanoparticulate form, i.e., bioactive glass nanoparticles (BGn), inside the alginate shell, while encapsulating rat mesenchymal stem cells in the collagen core. Ionic measurement in aqueous solution indicated a continuous release of calcium ions from the BGn-added and -free scaffolds, whereas silicon was only released from the BGn-containing scaffolds. The presence of BGn allowed higher number of cells to migrate into the scaffolds when implanted in subcutaneous tissues of rat. Cell viability was preserved in the presence of the BGn, with no significant differences noticed from the control. The presence of BGn enhanced the osteogenic differentiation of the encapsulated rat mesenchymal stem cells, presenting higher levels of alkaline phosphatase activity as well as bone related genes, including collagen type I, bone sialoprotein and osteocalcin. Taken together, the incorporated BGn potentiated the capacity of the core-shell fibrous hydrogel system to deliver stem cells targeting bone tissue engineering. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  7. Engineered core-shell nanofibers for electron transport study in dye-sensitized solar cells

    Science.gov (United States)

    Shabdan, Y.; Ronasi, A.; Coulibaly, P.; Moniruddin, M.; Nuraje, N.

    2017-06-01

    In this study, a unique approach was developed to synthesize 1-D core-shell nanofibers of carbon nanotubes (CNTs) and TiO2 using combination of coaxial electrospinning and sol-gel technique. Diameters of the fabricated core-shell single wall carbon nanotube-TiO2 (SWCNT-TiO2) and multi wall carbon nanotube-TiO2 (MWCNT-TiO2) nano-composite fibers were between 50-100nm. Energy dispersive spectroscopy (EDS) and X-ray photon spectroscopy (XPS) were applied to confirm encapsulation of carbon nanotube (CNT) in the core-shell structure. Electron transport properties of both SWCNT-TiO2 and MWCNT-TiO2 in the Dye-sensitized solar cells (DSSCs) were studied for the first time. It was found that SWCNT-TiO2 based DSSC provided higher short circuit current relative to MWCNT-TiO2, which was explained by I-V and bode plots. These findings were further illustrated by semi-conductive properties of SWCNT.

  8. Localized surface plasmon mediated energy transfer in the vicinity of core-shell nanoparticle

    Energy Technology Data Exchange (ETDEWEB)

    Shishodia, Manmohan Singh, E-mail: manmohan@gbu.ac.in; Juneja, Soniya [Department of Applied Physics, School of Vocational Studies and Applied Sciences, Gautam Buddha University, Greater Noida 201308 (India)

    2016-05-28

    Multipole spectral expansion based theory of energy transfer interactions between a donor and an acceptor molecule in the vicinity of a core-shell (nanoshell or core@shell) based plasmonic nanostructure is developed. In view of the diverse applications and rich plasmonic features such as tuning capability of surface plasmon (SP) frequencies, greater sensitivity to the change of dielectric environment, controllable redirection of electromagnetic radiation, closed form expressions for Energy Transfer Rate Enhancement Factor (ETREF) near core-shell particle are reported. The dependence of ETREF on different parameters is established through fitting equations, perceived to be of key importance for developing appropriate designs. The theoretical approach developed in the present work is capable of treating higher order multipoles, which, in turn, are also shown to play a crucial role in the present context. Moreover, closed form expressions derived in the present work can directly be used as formula, e.g., for designing SP based biosensors and estimating energy exchange between proteins and excitonic interactions in quantum dots.

  9. The stability and catalytic activity of W13@Pt42 core-shell structure

    Science.gov (United States)

    Huo, Jin-Rong; Wang, Xiao-Xu; Li, Lu; Cheng, Hai-Xia; Su, Yan-Jing; Qian, Ping

    2016-10-01

    This paper reports a study of the electronic properties, structural stability and catalytic activity of the W13@Pt42 core-shell structure using the First-principles calculations. The degree of corrosion of W13@Pt42 core-shell structure is simulated in acid solutions and through molecular absorption. The absorption energy of OH for this structure is lower than that for Pt55, which inhibits the poison effect of O containing intermediate. Furthermore we present the optimal path of oxygen reduction reaction catalyzed by W13@Pt42. Corresponding to the process of O molecular decomposition, the rate-limiting step of oxygen reduction reaction catalyzed by W13@Pt42 is 0.386 eV, which is lower than that for Pt55 of 0.5 eV. In addition by alloying with W, the core-shell structure reduces the consumption of Pt and enhances the catalytic efficiency, so W13@Pt42 has a promising perspective of industrial application.

  10. Development of a particle nanoimprinting technique by core-shell particles.

    Science.gov (United States)

    Watanabe, H; Nishimura, M; Fukui, Y; Fujimoto, K

    2014-02-18

    We developed a particle nanoimprinting technique assisted by the array of core-shell particles. Core-shell particles composed of a solid core of polystyrene and a soft shell were prepared by soap-free emulsion polymerization and subsequently seeded polymerization. By the Langmuir-Blodgett method, particles were arranged into a closely packed 2D array over the water surface and transferred onto a polystyrene (PS) substrate at a regular interval. The PS substrate was heated up above its glass transition temperature (Tg) by either UV irradiation using a high-pressure Hg lamp or heat treatment in a temperature-controlled incubator. It could be observed that a nanopatterned indented surface was formed through the denting of particles into the PS substrate (particle nanoindenting). By the detachment of particles from the substrate by ultrasonication in ethanol, nanoholes were produced over the surface (particle nanoimprinting). The depth and the wall of nanoholes and their interval were tunable by the shell thickness and the 2D packing ratio of core-shell particle monolayers. The contact angle decreased from 70 degrees of the pristine particle monolayer to 13 degrees by the particle nanoindenting, and again increased to 50 degrees by detaching the particles from the substrate to create the nanoholes. The use of nanoholes as zepto-litter volume vessels enabled us to produce and arrange nanocrystals, such as NaCl and CaCO3 (zepto-reactor).

  11. Novel Organically Modified Core-Shell Clay for Epoxy Composites-"SOBM Filler 1".

    Science.gov (United States)

    Iheaturu, Nnamdi Chibuike; Madufor, Innocent Chimezie

    2014-01-01

    Preparation of a novel organically modified clay from spent oil base drilling mud (SOBM) that could serve as core-shell clay filler for polymers is herein reported. Due to the hydrophilic nature of clay, its compatibility with polymer matrix was made possible through modification of the surface of the core clay sample with 3-aminopropyltriethoxysilane (3-APTES) compound prior to its use. Fourier transform infrared (FT-IR) spectroscopy was used to characterize clay surface modification. Electron dispersive X-ray diffraction (EDX) and scanning electron microscopy (SEM) were used to expose filler chemical composition and morphology, while electrophoresis measurement was used to examine level of filler dispersion. Results show an agglomerated core clay powder after high temperature treatment, while EDX analysis shows that the organically modified clay is composed of chemical inhomogeneities, wherein elemental compositions in weight percent vary from one point to the other in a probe of two points. Micrographs of the 3-APTES coupled SOBM core-shell clay filler clearly show cloudy appearance, while FT-IR indicates 25% and 5% increases in fundamental vibrations band at 1014 cm(-1) and 1435 cm(-1), respectively. Furthermore, 3-APTES coupled core-shell clay was used to prepare epoxy composites and tested for mechanical properties.

  12. Core shell hybrids based on noble metal nanoparticles and conjugated polymers: synthesis and characterization

    Directory of Open Access Journals (Sweden)

    Battocchio Chiara

    2011-01-01

    Full Text Available Abstract Noble metal nanoparticles of different sizes and shapes combined with conjugated functional polymers give rise to advanced core shell hybrids with interesting physical characteristics and potential applications in sensors or cancer therapy. In this paper, a versatile and facile synthesis of core shell systems based on noble metal nanoparticles (AuNPs, AgNPs, PtNPs, coated by copolymers belonging to the class of substituted polyacetylenes has been developed. The polymeric shells containing functionalities such as phenyl, ammonium, or thiol pending groups have been chosen in order to tune hydrophilic and hydrophobic properties and solubility of the target core shell hybrids. The Au, Ag, or Pt nanoparticles coated by poly(dimethylpropargylamonium chloride, or poly(phenylacetylene-co-allylmercaptan. The chemical structure of polymeric shell, size and size distribution and optical properties of hybrids have been assessed. The mean diameter of the metal core has been measured (about 10-30 nm with polymeric shell of about 2 nm.

  13. Nanocellulose Derivative/Silica Hybrid Core-Shell Chiral Stationary Phase: Preparation and Enantioseparation Performance

    Directory of Open Access Journals (Sweden)

    Xiaoli Zhang

    2016-05-01

    Full Text Available Core-shell silica microspheres with a nanocellulose derivative in the hybrid shell were successfully prepared as a chiral stationary phase by a layer-by-layer self-assembly method. The hybrid shell assembled on the silica core was formed using a surfactant as template by the copolymerization reaction of tetraethyl orthosilicate and the nanocellulose derivative bearing triethoxysilyl and 3,5-dimethylphenyl groups. The resulting nanocellulose hybrid core-shell chiral packing materials (CPMs were characterized and packed into columns, and their enantioseparation performance was evaluated by high performance liquid chromatography. The results showed that CPMs exhibited uniform surface morphology and core-shell structures. Various types of chiral compounds were efficiently separated under normal and reversed phase mode. Moreover, chloroform and tetrahydrofuran as mobile phase additives could obviously improve the resolution during the chiral separation processes. CPMs still have good chiral separation property when eluted with solvent systems with a high content of tetrahydrofuran and chloroform, which proved the high solvent resistance of this new material.

  14. Core/shell structured iron/iron-oxide nanoparticles as excellent MRI contrast enhancement agents

    Energy Technology Data Exchange (ETDEWEB)

    Khurshid, Hafsa, E-mail: hkhurshi@udel.edu [Department of Physics and Astronomy, University of Delaware, 217 sharp lab, Newark, DE 19716 (United States); Hadjipanayis, Costas G. [Department of Neurological Surgery, Emory University School of Medicine Atlanta, GA 30322 (United States); Chen, Hongwei [Department of Radiology, Emory University School of Medicine Atlanta, GA 30322 (United States); Li, Wanfeng [Department of Physics and Astronomy, University of Delaware, 217 sharp lab, Newark, DE 19716 (United States); Mao, Hui [Department of Radiology, Emory University School of Medicine Atlanta, GA 30322 (United States); Machaidze, Revaz [Department of Neurological Surgery, Emory University School of Medicine Atlanta, GA 30322 (United States); Tzitzios, Vasilis [Institute of Materials Science, “Demokritos” 15310 Athens (Greece); Hadjipanayis, George C. [Department of Physics and Astronomy, University of Delaware, 217 sharp lab, Newark, DE 19716 (United States)

    2013-04-15

    We report the use of metallic iron-based nanoparticles for magnetic resonance imaging (MRI) applications. Core/shell structured iron-based nanoparticles prepared by thermally decomposing organo-metallic compounds of iron at high temperature in the presence of hydrophobic surfactants were coated and stabilized in the aqueous solvent using the newly developed polysiloxane PEO–b–PγMPS (poly(ethylene oxide)–block–poly (γ methacryloxypropyl trimethyl oxysilane)) diblock copolymers. Particles are well suspended in water and retain their core–shell morphology after coating with the copolymer. In comparison to the conventionally used iron-oxide nanoparticles, core/shell structured iron/iron-oxide nanoparticles offer a much stronger T{sub 2} shortening effect than that of iron-oxide with the same core size due to their better magnetic properties. -- Highlights: ► Core/shell Fe/Fe-oxide nanoparticles were synthesized by organo-metallic synthesis. ► Water dispersibility was obtained by coating particles with a polysiloxane diblock copolymer. ► In comparison to Fe-oxide, Fe/Fe-oxide nanoparticles offer a much stronger T{sub 2} shortening effect.

  15. Investigation of the exciton emission lifetime in type-II spherical core/shell semiconductor heteronanostructures

    Science.gov (United States)

    Arfaoui, A.; Mahdouani, M.; Bourguiga, R.

    2017-08-01

    The two-band model effective mass approximation has been adopted to explain the energy spectra in type-I CdSe core-only and type-II CdSe/CdTe core/shell quantum dots (QDs). As optical properties, the emission wavelength, the electron-hole overlap integral and the radiative recombination lifetime have been investigated. The simulated emission spectra are in good agreement with available experimental results for both core-only and core/shell QDs. The radiative recombination lifetime (τrad) has been investigated in different carrier localization regimes and compared to that corresponding to core-only QDs. We have found a sudden increase in τrad at around r1 1.1 nm suggesting the transition of the heterostructure from the quasi-type-II to the type-II regime. A monotonic increase in τrad with the core and shell sizes (geometric parameters) was observed. Also found is the possibility of increasing τrad over two orders of magnitude with a suitable change in the geometric parameters. The long radiative lifetime produced by increasing the geometric parameters is found due to spatial separation of the carriers, which makes the type-II core/shell QDs made from large core and shell sizes promising for photovoltaic applications.

  16. The stability and catalytic activity of W13@Pt42 core-shell structure

    Science.gov (United States)

    Huo, Jin-Rong; Wang, Xiao-Xu; Li, Lu; Cheng, Hai-Xia; Su, Yan-Jing; Qian, Ping

    2016-01-01

    This paper reports a study of the electronic properties, structural stability and catalytic activity of the W13@Pt42 core-shell structure using the First-principles calculations. The degree of corrosion of W13@Pt42 core-shell structure is simulated in acid solutions and through molecular absorption. The absorption energy of OH for this structure is lower than that for Pt55, which inhibits the poison effect of O containing intermediate. Furthermore we present the optimal path of oxygen reduction reaction catalyzed by W13@Pt42. Corresponding to the process of O molecular decomposition, the rate-limiting step of oxygen reduction reaction catalyzed by W13@Pt42 is 0.386 eV, which is lower than that for Pt55 of 0.5 eV. In addition by alloying with W, the core-shell structure reduces the consumption of Pt and enhances the catalytic efficiency, so W13@Pt42 has a promising perspective of industrial application. PMID:27759038

  17. Structural and Magnetic Response in Bimetallic Core/Shell Magnetic Nanoparticles

    Science.gov (United States)

    Nairan, Adeela; Khan, Usman; Iqbal, Munawar; Khan, Maaz; Javed, Khalid; Riaz, Saira; Naseem, Shahzad; Han, Xiufeng

    2016-01-01

    Bimagnetic monodisperse CoFe2O4/Fe3O4 core/shell nanoparticles have been prepared by solution evaporation route. To demonstrate preferential coating of iron oxide onto the surface of ferrite nanoparticles X-ray diffraction (XRD), High resolution transmission electron microscope (HR-TEM) and Raman spectroscopy have been performed. XRD analysis using Rietveld refinement technique confirms single phase nanoparticles with average seed size of about 18 nm and thickness of shell is 3 nm, which corroborates with transmission electron microscopy (TEM) analysis. Low temperature magnetic hysteresis loops showed interesting behavior. We have observed large coercivity 15.8 kOe at T = 5 K, whereas maximum saturation magnetization (125 emu/g) is attained at T = 100 K for CoFe2O4/Fe3O4 core/shell nanoparticles. Saturation magnetization decreases due to structural distortions at the surface of shell below 100 K. Zero field cooled (ZFC) and Field cooled (FC) plots show that synthesized nanoparticles are ferromagnetic till room temperature and it has been noticed that core/shell sample possess high blocking temperature than Cobalt Ferrite. Results indicate that presence of iron oxide shell significantly increases magnetic parameters as compared to the simple cobalt ferrite.

  18. Newly fabricated magnetic lanthanide oxides core-shell nanoparticles in phosphoproteomics.

    Science.gov (United States)

    Jabeen, Fahmida; Najam-Ul-Haq, Muhammad; Rainer, Matthias; Güzel, Yüksel; Huck, Christian W; Bonn, Guenther K

    2015-01-01

    Metal oxides show high selectivity and sensitivity toward mass spectrometry based enrichment strategies. Phosphopeptides/phosphoproteins enrichment from biological samples is cumbersome because of their low abundance. Phosphopeptides are of interest in enzymes and phosphorylation pathways which lead to the clinical links of a disease. Magnetic core-shell lanthanide oxide nanoparticles (Fe3O4@SiO2-La2O3 and Fe3O4@SiO2-Sm2O3) are fabricated, characterized by SEM, FTIR, and EDX and employed in the enrichment of phosphopeptides. The nanoparticles enrich phosphopeptides from casein variants, nonfat milk, egg yolk, human serum and HeLa cell extract. The materials and enrichment protocols are designed in a way that there are almost no nonspecific bindings. The selectivity is achieved up to 1:8500 using β-casein/BSA mixture and sensitivity down to 1 atto-mole. Batch-to-batch reproducibility is high with the reuse of core-shell nanoparticles up to four cycles. The enrichment followed by MALDI-MS analyses is carried out for the identification of phosphopeptides from serum digest and HeLa cell extract. Characteristic phosphopeptides of phosphoproteins are identified from human serum after the enrichment, which have the diagnostic potential toward prostate cancer. Thus, the lanthanide based magnetic core-shell materials offer a highly selective and sensitive workflow in phosphoproteomics.

  19. The stability and catalytic activity of W13@Pt42 core-shell structure.

    Science.gov (United States)

    Huo, Jin-Rong; Wang, Xiao-Xu; Li, Lu; Cheng, Hai-Xia; Su, Yan-Jing; Qian, Ping

    2016-10-19

    This paper reports a study of the electronic properties, structural stability and catalytic activity of the W13@Pt42 core-shell structure using the First-principles calculations. The degree of corrosion of W13@Pt42 core-shell structure is simulated in acid solutions and through molecular absorption. The absorption energy of OH for this structure is lower than that for Pt55, which inhibits the poison effect of O containing intermediate. Furthermore we present the optimal path of oxygen reduction reaction catalyzed by W13@Pt42. Corresponding to the process of O molecular decomposition, the rate-limiting step of oxygen reduction reaction catalyzed by W13@Pt42 is 0.386 eV, which is lower than that for Pt55 of 0.5 eV. In addition by alloying with W, the core-shell structure reduces the consumption of Pt and enhances the catalytic efficiency, so W13@Pt42 has a promising perspective of industrial application.

  20. Core-Shell Processing of Natural Pigment: Upper Palaeolithic Red Ochre from Lovas, Hungary.

    Directory of Open Access Journals (Sweden)

    István E Sajó

    Full Text Available Ochre is the common archaeological term for prehistoric pigments. It is applied to a range of uses, from ritual burials to cave art to medications. While a substantial number of Palaeolithic paint mining pits have been identified across Europe, the link between ochre use and provenance, and their antiquity, has never yet been identified. Here we characterise the mineralogical signature of core-shell processed ochre from the Palaeolithic paint mining pits near Lovas in Hungary, using a novel integration of petrographic and mineralogical techniques. We present the first evidence for core-shell processed, natural pigment that was prepared by prehistoric people from hematitic red ochre. This involved combining the darker red outer shell with the less intensely coloured core to efficiently produce an economical, yet still strongly coloured, paint. We demonstrate the antiquity of the site as having operated between 14-13 kcal BP, during the Epigravettian period. This is based on new radiocarbon dating of bone artefacts associated with the quarry site. The dating results indicate the site to be the oldest known evidence for core-shell pigment processing. We show that the ochre mined at Lovas was exported from the site based on its characteristic signature at other archaeological sites in the region. Our discovery not only provides a methodological framework for future characterisation of ochre pigments, but also provides the earliest known evidence for "value-adding" of products for trade.

  1. PMMA/PMMA core-shell particles with ellipsoidal, fluorescent cores: accessing rotational dynamics.

    Science.gov (United States)

    Klein, Matthias K; Klinkenberg, Nele; Schuetter, Stefan; Saenger, Nicolai; Pfleiderer, Patrick; Zumbusch, Andreas

    2015-03-10

    For several decades, nonaqueous dispersions of PMMA particles have played an important role in colloid research. They have found application as colloidal model systems, which are used to probe glassy dynamics or to explore crystal nucleation. To date, most research has focused on spherical particles, in which only translational motion can be investigated. Recently, however, there has been a surge of interest in analyzing also rotational dynamics. In this contribution, we introduce a new class of core-shell particles, which can be used as rotational probes. The colloids described herein are composed of shape anisotropic, fluorescent cores covered with nonfluorescent PMMA shells. The core-shell particles are built up in four steps. In a first step, we produce fluorescent and photo-cross-linkable PMMA colloids. In the second step, these particles are thermomechanically elongated and fixed in defined ellipsoidal shapes by photo-cross-linking. Subsequently, we cover the cross-linked, fluorescent core with a nonfluorescent PMMA shell. The shape of the resulting core-shell colloids is tunable between the initial anisotropic and perfect spherical shape. For shaping, we apply a simple solvent swelling procedure. As one option, this method yields perfect PMMA spheres with ellipsoidal, fluorescent centers. We also report morphological particle characterization using various fluorescence microscopy techniques. Finally, we demonstrate that the rotational dynamics of individual colloids can be tracked and analyzed.

  2. Synthesis and Microwave Absorption Properties of Core-Shell Structured Co3O4-PANI Nanocomposites

    Directory of Open Access Journals (Sweden)

    Hongyan Xu

    2015-01-01

    Full Text Available The core-shell structured Co3O4-PANI nanocomposites have been successfully prepared using an in situ polymerization method, while the core Co3O4 nanoparticles were synthesized by carbon-assisted method using degreasing cotton as a template. The obtained samples were characterized by XRD, TEM, FTIR, and XPS. The results indicated that the amorphous PANI was well covered on the surface of the spinel Co3O4 and the Co3O4-PANI with core-shell structure was formed with particle size of about 100 nm. The interfacial interaction of the core-shell nanocomposite greatly enhances the microwave absorption properties. The maximum reflection loss of Co3O4-PANI is up to −45.8 dB at 11.7 GHz with a thickness of 2.5 mm and the adsorption bandwidth with the reflection loss below −10 dB reaches 14.1 GHz ranging from 3.9 to 18 GHz when the thickness is between 2 and 5.5 mm. Therefore, the facilely synthesized and low-cost Co3O4-PANI nanocomposite with superior microwave absorption properties can be a promising nanomaterial for high efficient microwave absorption.

  3. ANALISIS KEBERHASILAN PROGRAM PERLUASAN KEBUN KARET BIBIT UNGGUL CSR PT. ADARO INDONESIA

    Directory of Open Access Journals (Sweden)

    Hapijuddin Noor

    2016-10-01

    Full Text Available The concept of CSR based on the values of participation, empowerment, and self-sufficiency (self reliance in society is inseparable from the actual conditions and needs of the local community. One of the CSR programs undertaken by PT Adaro is people's rubber plantation development program by using seeds. Research done by conducting interviews of 36 people respondents specified in purposif to the community garden expansion program recipients rubber seeds PT Adaro Indonesia CSR in 2 (two location of research, namely: Murung Pudak Subdistrict and Upau Subdistrict and the province of South Kalimantan. The results showed that success of the expansion of Rubber Garden Superior CSR PT Adaro Indonesia. seen from the aspect of the cultivation is high. The success of the expansion of Rubber Garden Superior CSR PT Adaro Indonesia. high as seen from socio-economic and cultural aspects of institutional is high. In order for the success that has been achieved can be maintained and upgraded again especially to aspect institutional, which needs to be done coaching, supervision and guidance on an ongoing basis to the existing institutional.

  4. Experiencing CSR in Asia

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    2014-01-01

    This paper focuses on Corporate Social Responsibility (CSR) as strongly linked to expectations for corporations in the cultural con- texts in which they operate. Using an approach based in a macro-level for socio-technical design, it examines the interaction between digital activist efforts to (r...

  5. Can CSR be controlled?

    DEFF Research Database (Denmark)

    Kampf, Constance

    2009-01-01

    Associate Professor Constance Kampf talks about whether companies can control CSR or not, and she talks about the possible implications it can have if companies fail to live up their responsibilties. In that sense companies needs to consider the impact of the internet. She also gives advice on how...

  6. One-pot synthesis and characterization of rhodamine derivative-loaded magnetic core-shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Jin, E-mail: jzhang@eng.uwo.ca; Li Jiaxin [University of Western Ontario, Department of Chemical and Biochemical Engineering (Canada); Razavi, Fereidoon S. [Brock University, Department of Physics (Canada); Mumin, Abdul Md. [University of Western Ontario, Department of Chemical and Biochemical Engineering (Canada)

    2011-05-15

    A new method to produce elaborate nanostructure with magnetic and fluorescent properties in one entity is reported in this article. Magnetite (Fe{sub 3}O{sub 4}) coated with fluorescent silica (SiO{sub 2}) shell was produced through the one-pot reaction, in which one reactor was utilized to realize the synthesis of superparamagnetic core of Fe{sub 3}O{sub 4}, the formation of SiO{sub 2} coating through the condensation and polymerization of tetraethylorthosilicate (TEOS), and the encapsulation of tetramethyl rhodamine isothiocyanate-dextran (TRITC-dextran) within silica shell. Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) were carried out to investigate the core-shell structure. The magnetic core of the core-shell nanoparticles is 60 {+-} 10 nm in diameter. The thickness of the fluorescent SiO{sub 2} shell is estimated at 15 {+-} 5 nm. In addition, the fluorescent signal of the SiO{sub 2} shell has been detected by the laser confocal scanning microscopy (LCSM) with emission wavelength ({lambda}{sub em}) at 566 nm. In addition, the magnetic properties of TRITC-dextran loaded silica-coating iron oxide nanoparticles (Fe{sub 3}O{sub 4}-SiO{sub 2} NPs) were studied. The hysteresis loop of the core-shell NPs measured at room temperature shows that the saturation magnetization (M{sub s}) is not reached even at the field of 70 kOe (7T). Meanwhile, the very low coercivity (H{sub c}) and remanent magnetization (M{sub r}) are 0.375 kOe and 6.6 emu/g, respectively, at room temperature. It indicates that the core-shell particles have the superparamagnetic properties. The measured blocking temperature (T{sub B}) of the TRITC-dextran loaded Fe{sub 3}O{sub 4}-SiO{sub 2} NPs is about 122.5 K. It is expected that the multifunctional core-shell nanoparticles can be used in bio-imaging.

  7. Synthesis and morphology of iron-iron oxide core-shell nanoparticles produced by high pressure gas condensation

    NARCIS (Netherlands)

    Xing, Lijuan; ten Brink, Gert H.; Chen, Bin; Schmidt, Franz P.; Haberfehlner, Georg; Hofer, Ferdinand; Kooi, Bart J.; Palasantzas, Georgios

    2016-01-01

    Core-shell structured Fe nanoparticles (NPs) produced by high pressure magnetron sputtering gas condensation were studied using transmission electron microscopy (TEM) techniques, electron diffraction, electron energy-loss spectroscopy (EELS), tomographic reconstruction, and Wulff shape construction

  8. Highly Stretchable and Transparent Supercapacitor by Ag-Au Core-Shell Nanowire Network with High Electrochemical Stability.

    Science.gov (United States)

    Lee, Habeom; Hong, Sukjoon; Lee, Jinhwan; Suh, Young Duk; Kwon, Jinhyeong; Moon, Hyunjin; Kim, Hyeonseok; Yeo, Junyeob; Ko, Seung Hwan

    2016-06-22

    Stretchable and transparent electronics have steadily attracted huge attention in wearable devices. Although Ag nanowire is the one of the most promising candidates for transparent and stretchable electronics, its electrochemical instability has forbidden its application to the development of electrochemical energy devices such as supercapacitors. Here, we introduce a highly stretchable and transparent supercapacitor based on electrochemically stable Ag-Au core-shell nanowire percolation network electrode. We developed a simple solution process to synthesize the Ag-Au core-shell nanowire with excellent electrical conductivity as well as greatly enhanced chemical and electrochemical stabilities compared to pristine Ag nanowire. The proposed core-shell nanowire-based supercapacitor still possesses fine optical transmittance and outstanding mechanical stability up to 60% strain. The Ag-Au core-shell nanowire can be a strong candidate for future wearable electrochemical energy devices.

  9. An efficient room temperature core-shell AgPd@MOF catalyst for hydrogen production from formic acid

    Science.gov (United States)

    Ke, Fei; Wang, Luhuan; Zhu, Junfa

    2015-04-01

    Novel core-shell AgPd@MIL-100(Fe) NPs were fabricated by a facile one-pot method. Significantly, the as-prepared core-shell NPs exhibit much higher catalytic activity than the pure AgPd NPs toward hydrogen production from formic acid without using any additive at room temperature.Novel core-shell AgPd@MIL-100(Fe) NPs were fabricated by a facile one-pot method. Significantly, the as-prepared core-shell NPs exhibit much higher catalytic activity than the pure AgPd NPs toward hydrogen production from formic acid without using any additive at room temperature. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr07582j

  10. Facile synthesis of highly efficient one-dimensional plasmonic photocatalysts through Ag@Cu₂O core-shell heteronanowires.

    Science.gov (United States)

    Xiong, Jinyan; Li, Zhen; Chen, Jun; Zhang, Shanqing; Wang, Lianzhou; Dou, Shixue

    2014-09-24

    A novel class of one-dimensional (1D) plasmonic Ag@Cu2O core-shell heteronanowires have been synthesized at room temperature for photocatalysis application. The morphology, size, crystal structure and composition of the products were investigated by XRD, SEM, TEM, XPS, and UV-vis instruments. It was found the reaction time and the amount of Ag nanowires play crucial roles in the formation of well-defined 1D Ag@Cu2O core-shell heteronanowires. The resultant 1D Ag@Cu2O NWs exhibit much higher photocatalytic activity toward degradation of organic contaminants than Ag@Cu2O core-shell nanoparticles or pure Cu2O nanospheres under solar light irradiation. The drastic enhancement in photocatalytic activity could be attributed to the surface plasmon resonance and the electron sink effect of the Ag NW cores, and the unique 1D core-shell nanostructure.

  11. Synthesis of SnO2-ZnO Core-Shell Nanowires and Their Optoelectronic Properties

    Directory of Open Access Journals (Sweden)

    Ko-Ying Pan

    2012-01-01

    Full Text Available Zinc oxides deposited on Tin dioxide nanowires have been successfully synthesized by atomic layer deposition (ALD. The diameter of SnO2-ZnO core-shell nanowires is 100 nm by ALD 200 cycles. The result of electricity measurements shows that the resistance of SnO2-ZnO core-shell nanowires (ALD: 200 cycles is 925 Ω, which is much lower than pure SnO2 nanowires (3.6 × 106 Ω. The result of UV light test shows that the recovery time of SnO2-ZnO core-shell nanowires (ALD: 200 cycles is 328 seconds, which is lower than pure SnO2 nanowires (938 seconds. These results demonstrated that the SnO2-ZnO core-shell nanowires have potential application as UV photodetectors with high photon-sensing properties.

  12. Concave Pd-Pt Core-Shell Nanocrystals with Ultrathin Pt Shell Feature and Enhanced Catalytic Performance.

    Science.gov (United States)

    Zhang, Ying; Bu, Lingzheng; Jiang, Kezhu; Guo, Shaojun; Huang, Xiaoqing

    2016-02-10

    One-pot creation of unique concave Pd-Pt core-shell polyhedra has been developed for the first time using an efficient approach. Due to the concave feature and ultrathin Pt shell, the created Pd-Pt core-shell polyhedra exhibit enhanced catalytic performance in both the electrooxidation of methanol and hydrogenation of nitrobenzene, as compared with commercial Pt black and Pd black catalysts. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Global optimization and oxygen dissociation on polyicosahedral Ag32Cu6 core-shell cluster for alkaline fuel cells.

    Science.gov (United States)

    Zhang, N; Chen, F Y; Wu, X Q

    2015-07-07

    The structure of 38 atoms Ag-Cu cluster is studied by using a combination of a genetic algorithm global optimization technique and density functional theory (DFT) calculations. It is demonstrated that the truncated octahedral (TO) Ag32Cu6 core-shell cluster is less stable than the polyicosahedral (pIh) Ag32Cu6 core-shell cluster from the atomistic models and the DFT calculation shows an agreeable result, so the newfound pIh Ag32Cu6 core-shell cluster is further investigated for potential application for O2 dissociation in oxygen reduction reaction (ORR). The activation energy barrier for the O2 dissociation on pIh Ag32Cu6 core-shell cluster is 0.715 eV, where the d-band center is -3.395 eV and the density of states at the Fermi energy level is maximal for the favorable absorption site, indicating that the catalytic activity is attributed to a maximal charge transfer between an oxygen molecule and the pIh Ag32Cu6 core-shell cluster. This work revises the earlier idea that Ag32Cu6 core-shell nanoparticles are not suitable as ORR catalysts and confirms that Ag-Cu nanoalloy is a potential candidate to substitute noble Pt-based catalyst in alkaline fuel cells.

  14. CSR Model Implementation from School Stakeholder Perspectives

    Science.gov (United States)

    Herrmann, Suzannah

    2006-01-01

    Despite comprehensive school reform (CSR) model developers' best intentions to make school stakeholders adhere strictly to the implementation of model components, school stakeholders implementing CSR models inevitably make adaptations to the CSR model. Adaptations are made to CSR models because school stakeholders internalize CSR model practices…

  15. Green synthesis and characterization of Au@Pt core-shell bimetallic nanoparticles using gallic acid

    Science.gov (United States)

    Zhang, Guojun; Zheng, Hongmei; Shen, Ming; Wang, Lei; Wang, Xiaosan

    2015-06-01

    In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core-shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl4- and PtCl62-, where the AuCl4- ions are preferentially reduced to Au cores and the PtCl62- ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl4/H2PtCl6, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core-shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH4 reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core-shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.

  16. Tuning the Mechanical Properties of Hydrogel Core-Shell Particles by Inwards Interweaving Self-Assembly.

    Science.gov (United States)

    Pan, Houwen Matthew; Seuss, Maximilian; Neubauer, Martin P; Trau, Dieter W; Fery, Andreas

    2016-01-20

    Mechanical properties of hydrogel particles are of importance for their interactions with cells or tissue, apart from their relevance to other applications. While so far the majority of works aiming at tuning particle mechanics relied on chemical cross-linking, we report a novel approach using inwards interweaving self-assembly of poly(allylamine) (PA) and poly(styrenesulfonic acid) (PSSA) on agarose gel beads. Using this technique, shell thicknesses up to tens of micrometers can be achieved from single-polymer incubations and accurately controlled by varying the polymer concentration or incubation period. We quantified the changes in mechanical properties of hydrogel core-shell particles. The effective elastic modulus of core-shell particles was determined from force spectroscopy measurements using the colloidal probe-AFM (CP-AFM) technique. By varying the shell thickness between 10 and 24 μm, the elastic modulus of particles can be tuned in the range of 10-190 kPa and further increased by increasing the layer number. Through fluorescence quantitative measurements, the polymeric shell density was found to increase together with shell thickness and layer number, hence establishing a positive correlation between elastic modulus and shell density of core-shell particles. This is a valuable method for constructing multidensity or single-density shells of tunable thickness and is particularly important in mechanobiology as studies have reported enhanced cellular uptake of particles in the low-kilopascal range (shell particles for the separation of biomolecules or systemic study of stiffness-dependent cellular uptake.

  17. Probing photoluminescence dynamics of colloidal CdSe/ZnS core/shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Gurvir; Tripathi, S.K., E-mail: surya@pu.ac.in

    2014-11-15

    The paper presents the synthesis of thiol capped CdSe/ZnS core/shell nanoparticles with CdSe core and ZnS shell. The thickness of the ZnS shell has been controlled by the regulating the amount of Zn/S precursors for reaction. The steady and transient photoluminescence properties substantiate the growth of ZnS shell over the CdSe cores. High resolution transmission electron microscope and the X-ray diffraction patterns reveal nanocrystalline particles of an average size 3.4 nm packed in wurtzite lattice. Photoluminescence excitation spectra as well as the excitation–emission matrix of CdSe and CdSe/ZnS evidence the growth of ZnS for Type I hetero-junction without interfering the energy states of core. By this method, ZnS layer of 8.84 Å is optimum for fluorescence enhancement of the core/shell quantum dots. The multiexponential fluorescence decay of the quantum dots represents independent radiative recombinations with overlapped energies. It is revealed that the average fluorescence lifetimes of quantum dots decreased with increase in ZnS shell, which is due to the enhanced contribution from initially populated excitonic recombination and the reduction in the surface trap states with shell growth. - Highlights: • Synthesis of MAA capped CdSe/ZnS core/shell QDs with different shell thicknesses. • Shell thickness has been controlled by the amount of shell precursors added. • ZnS shell significantly enhanced the fluorescence quantum yield of QDs. • Superposition of quantum confinement energy model employed for shell thickness. • Probed the fluorescence dynamics of QDs by time resolved fluorescence spectroscopy.

  18. Structural optical correlated properties of SnO2/Al2O3 core@ shell heterostructure

    Science.gov (United States)

    Heiba, Zein K.; Imam, N. G.; Bakr Mohamed, Mohamed

    2016-07-01

    Nano size polycrystalline samples of the core@shell heterostructure of SnO2 @ xAl2O3 (x = 0, 25, 50, 75 wt.%) were synthesized by sol-gel technique. The resulting samples were characterized with fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) and X-ray powder diffraction (XRD). The XRD patterns manifest diffraction peaks of SnO2 as main phase with weak peaks corresponding to Al2O3 phase. The formation of core@ shell structure is confirmed by TEM images and Rietveld quantitative phase analysis which revealed that small part of Al2O3 is incorporated into the SnO2 lattice while the main part (shell) remains as a separate phase segregated on the grain boundary surface of SnO2 (core). It is found that the grain size of the mixed oxides SnO2 @ xAl2O3 is below 10 nm while for pure SnO2 it is over 41 nm, indicating that alumina can effectively prevent SnO2 from further growing up in the process of calcination. This is confirmed by the large increase in the specific surface area for mixed oxide samples. The PL emission showed great dependence on the structure properties analyzed by XRD and FTIR. The PL results recommend Al2O3@SnO2 core@shell heterostructure to be a promising short-wavelength luminescent optoelectronic devices for blue, UV, and laser light-emitting diodes.

  19. Preparation of hollow core/shell microspheres of hematite and its adsorption ability for samarium.

    Science.gov (United States)

    Yu, Sheng-Hui; Yao, Qi-Zhi; Zhou, Gen-Tao; Fu, Sheng-Quan

    2014-07-01

    Hollow core/shell hematite microspheres with diameter of ca. 1-2 μm have been successfully achieved by calcining the precursor composite microspheres of pyrite and polyvinylpyrrolidone (PVP) in air. The synthesized products were characterized by a wide range of techniques including powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), and Brunauer-Emmett-Teller (BET) gas sorptometry. Temperature- and time-dependent experiments unveil that the precursor pyrite-PVP composite microspheres finally transform into hollow core/shell hematite microspheres in air through a multistep process including the oxidation and sulfation of pyrite, combustion of PVP occluded in the precursor, desulfation, aggregation, and fusion of nanosized hematite as well as mass transportation from the interior to the exterior of the microspheres. The formation of the hollow core/shell microspheres dominantly depends on the calcination temperature under current experimental conditions, and the aggregation of hematite nanocrystals and the core shrinking during the oxidation of pyrite are responsible for the formation of the hollow structures. Moreover, the adsorption ability of the hematite for Sm(III) was also tested. The results exhibit that the hematite microspheres have good adsorption activity for trivalent samarium, and that its adsorption capacity strongly depends on the pH of the solution, and the maximum adsorption capacity for Sm(III) is 14.48 mg/g at neutral pH. As samarium is a typical member of the lanthanide series, our results suggest that the hollow hematite microspheres have potential application in removal of rare earth elements (REEs) entering the water environment.

  20. Synthesis of fly ash based core-shell composites for use as functional pigment in paints

    Science.gov (United States)

    Sharma, Richa; Tiwari, Sangeeta

    2016-04-01

    Fly ash is a combustion residue, mainly composed of silica, alumina and iron oxides. It is produced by the power industries in very large amounts and usually disposed in landfills, which have represented an environmental problem in recent years1. The need to generate a market for fly ash consumption is the main reason why alternative applications have been studied. It has been applied as an additive in construction materials like cement and pavements2. The present work describes the synthesis of Flyash-Titania core-shell particles by precipitation technique using Titanium tetra isopropoxide (TTIP) which can be used for variety of applications such as NIR reflecting materials for cool coatings, Photocatalysis etc. In this work, Fly ash is used in core and Nano -TiO2 is coated as shell on it. Surfactants are used to improve the adhesion of Nano Titania shell on fly ash core. Effect on adhesion of TiO2 on Fly ash is studied by using different types of surfactant. The preparation of core shells was carried out in absence of surfactant as well as using anionic and non-ionic surfactants. The percentage of surfactant was varied to study the effect of amount of surfactant on the uniformity and size of particles in the shell using Kubelka-Munk transformed reflectance spectra. The morphology of core shell structures was studied using SEM technique. Use of anionic surfactant results in more uniform coating with reduced particle size of the shell material. The composite particles prepared by using anionic surfactant are having good pigment properties and also shows good reflectance in Near Infrared region and hence can be used as a pigment in cool coatings.

  1. Formation of hybrid films from perylenediimide-labeled core-shell silica-polymer nanoparticles.

    Science.gov (United States)

    Ribeiro, Tânia; Fedorov, Aleksander; Baleizão, Carlos; Farinha, José Paulo S

    2013-07-01

    We prepared water-dispersible core-shell nanoparticles with a perylenediimide-labeled silica core and a poly(butyl methacrylate) shell, for application in photoactive high performance coatings. Films cast from water dispersions of the core-shell nanoparticles are flexible and transparent, featuring homogeneously dispersed silica nanoparticles, and exhibiting fluorescence under appropriate excitation. We characterized the film formation process using nanoparticles where the polymer shell has been labeled with either a non-fluorescent N-benzophenone derivative (NBen) or a fluorescent phenanthrene derivative (PheBMA). We used Förster resonance energy transfer (FRET) from PheBMA to NBen to follow the interparticle interdiffusion of the polymer anchored to the silica surface that occurs after the dried dispersions are annealing above the glass transition temperature of the polymer. By calculating the evolution of the FRET quantum efficiency with annealing time, we could estimate the approximate fraction of mixing (fm) between polymer from neighbor particles, and from this, the apparent diffusion coefficients (Dapp) for this process. For long annealing times, the limiting values of fm are slightly lower than for films of pure PBMA particles at similar temperatures (go up to 80% of total possible mixing). The corresponding diffusion coefficients are also very similar to those reported for films of pure PBMA, indicating that the fact that the polymer chains are anchored to the silica particles does not significantly hinder the diffusion process during the initial part of the mixing process. From the temperature dependence of the diffusion coefficients, we found an effective activation energy for diffusion of Ea=38 kcal/mol, very similar to the value obtained for particles of the same polymer without the silica core. With these results, we show that, although the polymer is grafted to the silica surface, polymer interdiffusion during film formation is not significantly

  2. Grafting Modification of the Reactive Core-Shell Particles to Enhance the Toughening Ability of Polylactide.

    Science.gov (United States)

    Li, Zhaokun; Song, Shixin; Zhao, Xuanchen; Lv, Xue; Sun, Shulin

    2017-08-16

    In order to overcome the brittleness of polylactide (PLA), reactive core-shell particles (RCS) with polybutadiene as core and methyl methacrylate-co-styrene-co-glycidyl methacrylate as shell were prepared to toughen PLA. Tert-dodecyl mercaptan (TDDM) was used as chain transfer agent to modify the grafting properties (such as grafting degree, shell thickness, internal and external grafting) of the core-shell particles. The introduction of TDDM decreased the grafting degree, shell thickness and the Tg of the core phase. When the content of TDDM was lower than 1.15%, the RCS particles dispersed in the PLA matrix uniformly-otherwise, agglomeration took place. The addition of RCS particles induced a higher cold crystallization temperature and a lower melting temperature of PLA which indicated the decreased crystallization ability of PLA. Dynamic mechanical analysis (DMA) results proved the good miscibility between PLA and the RCS particles and the increase of TDDM in RCS induced higher storage modulus of PLA/RCS blends. Suitable TDDM addition improved the toughening ability of RCS particles for PLA. In the present research, PLA/RCS-T4 (RCS-T4: the reactive core-shell particles with 0.76 wt % TDDM addition) blends displayed much better impact strength than other blends due to the easier cavitation/debonding ability and good dispersion morphology of the RCS-T4 particles. When the RCS-T4 content was 25 wt %, the impact strength of PLA/RCS-T4 blend reached 768 J/m, which was more than 25 times that of the pure PLA.

  3. Water oxidation catalysis by birnessite@iron oxide core-shell nanocomposites.

    Science.gov (United States)

    Elmaci, Gökhan; Frey, Carolin E; Kurz, Philipp; Zümreoğlu-Karan, Birgül

    2015-03-16

    In this work, magnetic nanocomposite particles were prepared for water oxidation reactions. The studied catalysts consist of maghemite (γ-Fe2O3), magnetite (Fe3O4), and manganese ferrite (MnFe2O4) nanoparticles as cores coated in situ with birnessite-type manganese oxide shells and were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermal, chemical, and surface analyses, and magnetic measurements. The particles were found to be of nearly spherical core-shell architectures with average diameter of 150 nm. Water oxidation catalysis was examined using Ce(4+) as the sacrificial oxidant. All core-shell particles were found to be active water oxidation catalysts. However, the activity was found to depend on a variety of factors like the type of iron oxide core, the structure and composition of the shell, the coating characteristics, and the surface properties. Catalysts containing magnetite and manganese ferrite as core materials displayed higher catalytic activities per manganese ion (2650 or 3150 mmolO2 molMn(-1) h(-1)) or per mass than nanoiron oxides (no activity) or birnessite alone (1850 mmolO2 molMn(-1) h(-1)). This indicates synergistic effects between the MnOx shell and the FeOx core of the composites and proves the potential of the presented core-shell approach for further catalyst optimization. Additionally, the FeOx cores of the particles allow magnetic recovery of the catalyst and might also be beneficial for applications in water-oxidizing anodes because the incorporation of iron might enhance the overall conductivity of the material.

  4. HIRFL-CSR complex

    Institute of Scientific and Technical Information of China (English)

    XIA Jia-Wen; ZHAN Wen-Long; WEI Bao-Wen; YUAN You-Jin; YUAN Ping; QIAO Wei-Min; GAO Da-Qing; YANG Xiao-Tian; MAN Kai-Di; XIAO Guo-Qing; ZHAO Hong-Wei; YANG Xiao-Dong; CAI Xiao-Hong; SONG Ming-Tao; XU Hu-Shan; MA Li-Zhen; LIU Yong; HE Yuan; ZHOU Zhong-Zu; ZHANG Wei; XU Zhe; MAO Rui-Shi; ZHANG Jun-Hui; JING Lan; YANG Ya-Qing; YANG Jian-Cheng; MAO Li-Jun; CHEN You-Xin

    2009-01-01

    The construction and commissioning of HIRFL-CSR were finished in 2007. From 2000 to 2005 the subsystem and key devices of CSR were successfully fabricated, such as magnet, power supply, UHV system, e-cooler, electric-static deflector with the septum of 0.1 mm, and the fast-pulse kicker with the rise time of 150 ns. After that the CSR commissioning activities were performed in 2006 and 2007, including the accumulation of those heavy ions of C, At, Kr and Xe by the combination of stripping injection (STI) or multiple multi-turn injection (MMI) and e-cooling with a hollow e-beam, wide energy-range synchrotron ramping by changing the RF harmonic-number at mid-energy, the beam stacking in the experimental ring CSRe, the RIBs mass-measurement with the isochronous-mode in CSRe by using the time-of-flight method, and the ion beam slow-extraction from CSRm.

  5. Core-shell polymer nanoparticles for prevention of GSH drug detoxification and cisplatin delivery to breast cancer cells

    Science.gov (United States)

    Surnar, Bapurao; Sharma, Kavita; Jayakannan, Manickam

    2015-10-01

    Platinum drug delivery against the detoxification of cytoplasmic thiols is urgently required for achieving efficacy in breast cancer treatment that is over expressed by glutathione (GSH, thiol-oligopeptide). GSH-resistant polymer-cisplatin core-shell nanoparticles were custom designed based on biodegradable carboxylic functional polycaprolactone (PCL)-block-poly(ethylene glycol) diblock copolymers. The core of the nanoparticle was fixed as 100 carboxylic units and the shell part was varied using various molecular weight poly(ethylene glycol) monomethyl ethers (MW of PEGs = 100-5000 g mol-1) as initiator in the ring-opening polymerization. The complexation of cisplatin aquo species with the diblocks produced core-shell nanoparticles of 75 nm core with precise size control the particles up to 190 nm. The core-shell nanoparticles were found to be stable in saline solution and PBS and they exhibited enhanced stability with increase in the PEG shell thickness at the periphery. The hydrophobic PCL layer on the periphery of the cisplatin core behaved as a protecting layer against the cytoplasmic thiol residues (GSH and cysteine) and exhibited cisplatin and polymer drug core-shell nanoparticles showed similar cytotoxicity effects in the HeLa cells. In MCF-7 cells, the free cisplatin drug exhibited 50% cell death whereas complete cell death (100%) was accomplished by the polymer-cisplatin core-shell nanoparticles. Confocal microscopic images confirmed that the core-shell nanoparticles were taken up by the MCF-7 and HeLa cells and they were accumulated both at the cytoplasm as well at peri-nuclear environments. The present investigation lays a new foundation for the polymer-based core-shell nanoparticles approach for overcoming detoxification in platinum drugs for the treatment of GSH over-expressed breast cancer cells.Platinum drug delivery against the detoxification of cytoplasmic thiols is urgently required for achieving efficacy in breast cancer treatment that is over

  6. Surface-engineered core-shell nano-size ferrites and their antimicrobial activity

    Energy Technology Data Exchange (ETDEWEB)

    Baraliya, Jagdish D., E-mail: jdbaraliya@yahoo.co.in; Joshi, Hiren H., E-mail: jdbaraliya@yahoo.co.in [Department of Physics, Saurashtra University, Rajkot - 360 005, Gujarat (India)

    2014-04-24

    We report the results of biological study on core-shell structured MFe{sub 2}O{sub 4} (where M = Co, Mn, Ni) nanoparticles and influence of silica- DEG dual coating on their antimicrobial activity. Spherical MFe{sub 2}O{sub 4} nanoparticles were prepared via a Co-precipitation method. The microstructures and morphologies of these nanoparticles were studied by x-ray diffraction and FTIR. The antimicrobial activity study carried out in nutrient agar medium with addition of antimicrobial synthesis compound which is tested for its activity against different types of bacteria.

  7. Core-shell polymeric microcapsules with superior thermal and solvent stability.

    Science.gov (United States)

    Kang, Sen; Baginska, Marta; White, Scott R; Sottos, Nancy R

    2015-05-27

    A protective polydopamine (PDA) coating is applied to core-shell microcapsule surfaces by the polymerization of dopamine monomers. A neutral aqueous solution and the addition of an oxidant (i.e., ammonium persulfate) are crucial for microcapsule survival and the initiation of PDA polymerization, respectively. The resulting PDA coating is a dense and uniform layer approximately 50 nm thick. The PDA protective coating significantly increases capsule stability at an elevated temperature (180 °C) and in a variety of organic solvents and acidic/basic solutions that otherwise lead to deflation and loss of the core content of uncoated microcapsules.

  8. Using core-shell metamaterial engineering to triple the critical temperature of a superconductor

    CERN Document Server

    Smolyaninova, Vera N; Gresock, Thomas; Jensen, Christopher; Prestigiacomo, Joseph C; Osofsky, M S; Smolyaninov, Igor I

    2015-01-01

    Recent experiments have shown the viability of the metamaterial approach to dielectric response engineering for moderately enhancing the transition temperature, Tc, of a superconductor. In this report, we demonstrate the use of Al2O3-coated aluminium nanoparticles to form the recently proposed epsilon near zero (ENZ) core-shell metamaterial superconductor with a Tc that is three times that of pure aluminium. IR reflectivity measurements confirm the predicted metamaterial modification of the dielectric function thus demonstrating the efficacy of the ENZ metamaterial approach to Tc engineering. These results provide an explanation for the long known, but not understood, enhancement of the Tc of granular aluminum films.

  9. Thermodynamic considerations and computer simulations on the formation of core-shell nanoparticles under electrochemical conditions.

    Science.gov (United States)

    Oviedo, O A; Leiva, E P M; Mariscal, M M

    2008-06-28

    We report on thermodynamic modeling and computer simulations on the electrochemical generation of metallic and bimetallic nanoparticles (NPs) by means of quenched molecular dynamics (QMD). The present results suggest that the spontaneous formation of core-shell NPs depends on several factors, i.e. size and shape of the core, chemical composition of the system, and under-/oversaturation conditions. Homo- and heteroatomic prototypical systems were considered. The former systems were Au and Pt. The latter were Ag(core)/Au(shell), Pt(core)/Au(shell), Au(core)/Ag(shell) and Au(core)/Pt(shell).

  10. Electrochemical and Microstructural Studies in Reinforced Mortar, Modified with Core-Shell Micelles

    OpenAIRE

    Koleva, D. A.; Breugel, K. van; Boshkov, N.; Mol, J.M.C.; Wit, J.H.W. de

    2010-01-01

    This work reports on monitoring chloride-induced corrosion in reinforced mortar specimens, with and without addition of polymeric nano-aggregates in the mortar mixture. The investigation is a novel approach to control steel corrosion in reinforced concrete, hereby reporting the preliminary results, related to one of the main objectives: studying the influence of admixed polymer nano-aggregates (in the form of PEO113-b-PS218 core-shell micelles with a very low concentration of 0.006 wt.% per m...

  11. Synthesis and characterisation of core-shell structures for orthopaedic surgery.

    Science.gov (United States)

    Rusen, Edina; Zaharia, Cătălin; Zecheru, Teodora; Mărculescu, Bogdan; Filmon, Robert; Chappard, Daniel; Bădulescu, Roxana; Cincu, Corneliu

    2007-01-01

    This paperwork deals with the obtaining and characterisation of new acrylic cements for bone surgery. The final mixture of cement contains derivatives of methacryloyloxyethyl phosphate, methacrylic acid or 2-acrylamido-2-methyl-1-propane sulphonic acid. The idea of using these monomers is sustained by their ability to form ionic bonds with barium, which is responsible for X-ray reflection and by the biocompatibility of these structures. The strategy consists in the obtaining of core-shell structures through heterogeneous polymerisation, which are used for final cement's manufacture. The orthopaedic cements were characterised by SEM, EDX, compression resistance and cytotoxicity assays.

  12. Metal enhanced fluorescence in rare earth doped plasmonic core-shell nanoparticles.

    Science.gov (United States)

    Derom, S; Berthelot, A; Pillonnet, A; Benamara, O; Jurdyc, A M; Girard, C; Colas des Francs, G

    2013-12-13

    We theoretically and numerically investigate metal enhanced fluorescence of plasmonic core-shell nanoparticles doped with rare earth (RE) ions. Particle shape and size are engineered to maximize the average enhancement factor (AEF) of the overall doped shell. We show that the highest enhancement (11 in the visible and 7 in the near-infrared) is achieved by tuning either the dipolar or the quadrupolar particle resonance to the rare earth ion's excitation wavelength. Additionally, the calculated AEFs are compared to experimental data reported in the literature, obtained in similar conditions (plasmon mediated enhancement) or when a metal-RE energy transfer mechanism is involved.

  13. Computational screening of core@shell nanoparticles for the hydrogen evolution and oxygen reduction reactions

    Science.gov (United States)

    Corona, Benjamin; Howard, Marco; Zhang, Liang; Henkelman, Graeme

    2016-12-01

    Using density functional theory calculations, a set of candidate nanoparticle catalysts are identified based on reactivity descriptors and segregation energies for the oxygen reduction and hydrogen evolution reactions. Trends in the data were identified by screening over 700 core@shell 2 nm transition metal nanoparticles for each reaction. High activity was found for nanoparticles with noble metal shells and a variety of core metals for both reactions. By screening for activity and stability, we obtain a set of interesting bimetallic catalysts, including cases that have reduced noble metal loadings and a higher predicted activity as compared to monometallic Pt nanoparticles.

  14. Synthesis of Core-Shell @@ Microspheres and Their Application as Recyclable Photocatalysts

    Directory of Open Access Journals (Sweden)

    Zhenghua Wang

    2012-01-01

    Full Text Available We report the fabrication of core-shell Fe3O4@SiO2@TiO2 microspheres through a wet-chemical approach. The Fe3O4@SiO2@TiO2 microspheres possess both ferromagnetic and photocatalytic properties. The TiO2 nanoparticles on the surfaces of microspheres can degrade organic dyes under the illumination of UV light. Furthermore, the microspheres are easily separated from the solution after the photocatalytic process due to the ferromagnetic Fe3O4 core. The photocatalysts can be recycled for further use with slightly lower photocatalytic efficiency.

  15. Enhanced Photocatalytic Properties Of Core@shell Sio2@tio2 Nanoparticles

    OpenAIRE

    Ullah; Sajjad; Ferreira-Neto; Elias P.; Pasa; Andre A.; Alcantara; Carlos C. J.; Acuna; Jose J. S.; Bilmes; Sara A.; Ricci; Maria L. Martinez; Landers; Richard; Fermino; Taina Zampieri; Rodrigues-Filho; Ubirajara P.

    2016-01-01

    SiO2@TiO2 core@shell nanoparticles (CSNs) have recently attracted great attention due to their unique and tunable optical and photocatalytic properties and higher dispersion of the supported TiO2. Thus, development of facile, reproducible and effective methods for the synthesis of SiO2@TiO2 CSNs and a fundamental understanding of their improved properties, derived from combination of different core and shell materials, is of great importance. Here we report a very facile and reproducible meth...

  16. Synthesis of Core-Shell @ @ Microspheres and Their Application as Recyclable Photocatalysts

    OpenAIRE

    Zhenghua Wang; Ling Shen; Shiyu Zhu

    2012-01-01

    We report the fabrication of core-shell Fe3O4@SiO2@TiO2 microspheres through a wet-chemical approach. The Fe3O4@SiO2@TiO2 microspheres possess both ferromagnetic and photocatalytic properties. The TiO2 nanoparticles on the surfaces of microspheres can degrade organic dyes under the illumination of UV light. Furthermore, the microspheres are easily separated from the solution after the photocatalytic process due to the ferromagnetic Fe3O4 core. The photocatalysts can be recycled for further us...

  17. Quasiballistic quantum transport through Ge/Si core/shell nanowires.

    Science.gov (United States)

    Kotekar-Patil, D; Nguyen, B-M; Yoo, J; Dayeh, S A; Frolov, S M

    2017-09-20

    We study signatures of ballistic quantum transport of holes through Ge/Si core/shell nanowires at low temperatures. We observe Fabry-Pérot interference patterns as well as conductance plateaus at integer multiples of 2e (2)/h at zero magnetic field. Magnetic field evolution of these plateaus reveals relatively large effective Landé g-factors. Ballistic effects are observed in nanowires with silicon shell thickness of 1-3 nm, but not in bare germanium wires. These findings inform the future development of spin and topological quantum devices which rely on ballistic sub-band-resolved transport.

  18. No-Core Shell Model Calculations in Light Nuclei with Three-Nucleon Forces

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, B R; Vary, J P; Nogga, A; Navratil, P; Ormand, W E

    2004-01-08

    The ab initio No-Core Shell Model (NCSM) has recently been expanded to include nucleon-nucleon (NN) and three-nucleon (3N) interactions at the three-body cluster level. Here it is used to predict binding energies and spectra of p-shell nuclei based on realistic NN and 3N interactions. It is shown that 3N force (3NF) properties can be studied in these nuclear systems. First results show that interactions based on chiral perturbation theory lead to a realistic description of {sup 6}Li.

  19. POxylated Polyurea Dendrimers: Smart Core-Shell Vectors with IC50 Lowering Capacity.

    Science.gov (United States)

    Restani, Rita B; Conde, João; Pires, Rita F; Martins, Pedro; Fernandes, Alexandra R; Baptista, Pedro V; Bonifácio, Vasco D B; Aguiar-Ricardo, Ana

    2015-08-01

    The design and preparation of highly efficient drug delivery platforms using green methodologies is at the forefront of nanotherapeutics research. POxylated polyurea dendrimers are efficiently synthesized using a supercritical-assisted polymerization in carbon dioxide. These fluorescent, pH-responsive and water-soluble core-shell smart nanocarriers show low toxicity in terms of cell viability and absence of glutathione depletion, two of the major side effect limitations of current vectors. The materials are also found to act as good transfection agents, through a mechanism involving an endosomal pathway, being able to reduce 100-fold the IC50 of paclitaxel.

  20. Preparation of quercetin imprinted core-shell organosilicate microspheres using surface imprinting technique

    Institute of Scientific and Technical Information of China (English)

    Peng Yang; Wen Dan Hou; Hong Deng Qiu; Xia Liu; Sheng Xiang Jiang

    2012-01-01

    In this work,the quercetin imprinted core-shell microspheres were prepared using silica surface imprinting technique.A simple sol-gel procedure was used for the synthesis of the imprinted materials with 3-aminopropyltriethoxysilane as functional monomer and tetraethyl orthosilicate as crosslinker.The SEM images indicated that the MIPs shell was successfully grafted onto the silica surface.The characteristics of the molecularly imprinted polymers such as capacity,selectivity and absorption dynamic were investigated by rebinding experiments.The results showed that the prepared MIPs had good imprinting effect and adsorption amount of quercetin.

  1. Amorphous Silicon Solar cells with a Core-Shell Nanograting Structure

    CERN Document Server

    Yang, L; Okuno, Y; He, S

    2011-01-01

    We systematically investigate the optical behaviors of an amorphous silicon solar cell based on a core-shell nanograting structure. The horizontally propagating Bloch waves and Surface Plasmon Polariton (SPP) waves lead to significant absorption enhancements and consequently short-circuit current enhancements of this structure, compared with the conventional planar one. The perpendicular carrier collection makes this structure optically thick and electronically thin. An optimal design is achieved through full-field numerical simulation, and physical explanation is given. Our numerical results show that this configuration has ultrabroadband, omnidirectional and polarization-insensitive responses, and has a great potential in photovoltaics.

  2. Faster radial strain relaxation in InAs-GaAs core-shell heterowires

    Energy Technology Data Exchange (ETDEWEB)

    Kavanagh, Karen L. [Department of Physics, Simon Fraser University, Burnaby, British Columbia V5A 1S6 (Canada); Saveliev, Igor; Blumin, Marina; Ruda, Harry E. [Centre for Advanced Nanotechnology, University of Toronto, 170 College Street, Toronto, Ontario M5S 3E4 (Canada); Swadener, Greg [Mechanical Engineering and Design, Aston University, Aston Triangle, Birmingham B4 7ET (United Kingdom)

    2012-02-15

    The structure of wurtzite and zinc blende InAs-GaAs (001) core-shell nanowires grown by molecular beam epitaxy on GaAs (001) substrates has been investigated by transmission electron microscopy. Heterowires with InAs core radii exceeding 11 nm, strain relax through the generation of misfit dislocations, given a GaAs shell thickness greater than 2.5 nm. Strain relaxation is larger in radial directions than axial, particularly for shell thicknesses greater than 5.0 nm, consistent with molecular statics calculations that predict a large shear stress concentration at each interface corner.

  3. GaAs-Fe₃Si core-shell nanowires: nanobar magnets.

    Science.gov (United States)

    Hilse, Maria; Herfort, Jens; Jenichen, Bernd; Trampert, Achim; Hanke, Michael; Schaaf, Peter; Geelhaar, Lutz; Riechert, Henning

    2013-01-01

    Semiconductor-ferromagnet GaAs-Fe3Si core-shell nanowires were grown by molecular beam epitaxy and analyzed by scanning and transmission electron microscopy, X-ray diffraction, Mössbauer spectroscopy, and magnetic force microscopy. We obtained closed and smooth Fe3Si shells with a crystalline structure that show ferromagnetic properties with magnetizations along the nanowire axis (perpendicular to the substrate). Such nanobar magnets are promising candidates to enable the fabrication of new forward-looking devices in the field of spintronics and magnetic recording.

  4. Diffractive imaging of transient electronic core-shell structures in a nanoplasma

    CERN Document Server

    Rupp, Daniela; Adolph, Marcus; Gorkhover, Tais; Krikunova, Maria; Müller, Jan-Phillipe; Müller, Maria; Oelze, Tim; Ovcharenko, Yevheniy; Sauppe, Mario; Schorb, Sebastian; Wolter, David; Harmand, Marion; Treusch, Rolf; Bostedt, Christoph; Möller, Thomas

    2016-01-01

    We have recorded the coherent diffraction images of individual xenon clusters using intense extreme ultraviolet free-electron laser pulses tuned to atomic and ionic resonances in order to elucidate the influence of light induced electronic changes on the diffraction pattern. The data show the emergence of a transient core-shell structure within the otherwise homogeneous sample. Simulations indicate that ionization and nanoplasma formation result in a cluster shell with strongly altered refraction. The presented resonant scattering approach enables the imaging of ultrafast electron dynamics with unprecedented spatial resolution on their natural time scale.

  5. SISGR - Design and Characterization of Novel Photocatalysts With Core-Shell Nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Zaera, Francisco [Univ. of California, Riverside, CA (United States). Dept. of Chemistry; Bardeen, Christopher J. [Univ. of California, Riverside, CA (United States). Dept. of Chemistry; Yin, Yadong [Univ. of California, Riverside, CA (United States). Dept. of Chemistry

    2017-03-15

    The overall goal of this project has been to develop new a new and novel class of well-characterized nanostructured Metal@TiO2 core-shell and yolk-shell photocatalysts to address two fundamental issues presently limiting this field: (1) the fast recombination of electron-hole pairs once generated by light absorption, and (2) the recombination of H2 and O2 on the metal surface once produced. These model samples are also used to study the fundamentals of the photocatalytic processes.

  6. Hide the interior region of core-shell nanoparticles with quantum invisible cloaks

    CERN Document Server

    Lee, Jeng Yi

    2013-01-01

    By applying the interplay among the nodal points of partial waves, along with the concept of streamline in fluid dynamics for the probability flux, a quantum invisible cloak to the electron transport in a host semiconductor is demonstrated by simultaneously guiding the probability flux outside the core region and keeping the total scattering cross section negligible. As the probability flux vanishes in the interior region, one can embed any material inside a multiple core-shell sphere without affecting physical observables from the outside. Our results reveal the possibility to design a protection shield layer for fragile interior parts from the impact of transports of electrons.

  7. Highly tuneable hole quantum dots in Ge-Si core-shell nanowires

    Science.gov (United States)

    Brauns, Matthias; Ridderbos, Joost; Li, Ang; van der Wiel, Wilfred G.; Bakkers, Erik P. A. M.; Zwanenburg, Floris A.

    2016-10-01

    We define single quantum dots of lengths varying from 60 nm up to nearly half a micron in Ge-Si core-shell nanowires. The charging energies scale inversely with the quantum dot length between 18 and 4 meV. Subsequently, we split up a long dot into a double quantum dot with a separate control over the tunnel couplings and the electrochemical potential of each dot. Both single and double quantum dot configurations prove to be very stable and show excellent control over the electrostatic environment of the dots, making this system a highly versatile platform for spin-based quantum computing.

  8. CSR, SMEs and Social Capital

    DEFF Research Database (Denmark)

    Murillo, David; Vallentin, Steen

    2012-01-01

    behind these CSR actions must reflect their essentially pragmatic nature. Actions are linked to social values but also, more importantly, to the nature of the competitive environment c) Business ethics must seek common ground with other more sociological disciplines if it is to explain the reasons behind...... in the automotive sector, took the distinctive approach of trying to understand the nature of CSR-like activities developed not by best-in-class CSR-driven companies but by purely competitiveness-driven firms. The case studies provide explicit evidence that the CSR activities of SMEs and the notion of social...... to CSR. Four basic concerns, which take the form of propositions for further research, serve as the basis for this analysis: a) A definition of CSR that includes most of the actions taken by all companies in the territory contributes no academic value to the discipline b) Any study of the motivation...

  9. Providing Southern Perspectives on CSR

    DEFF Research Database (Denmark)

    Jeppesen, Søren; Kothuis, Bas

    of the key institutional issues affecting the CSR practices of SMEs. It presents perceptions of CSR practices among 21 SMEs in the garment industry in South Africa, based on 40 interviews with managers and 19 interviews with workers through the use of qualitative and quantitative interview frameworks...... are found to be important factors in explaining the CSR perceptions and level of practices. It is suggested that future research investigate the role of informal practices further and explore the role of institutional theory....

  10. CSR-kommunikation med omtanke

    OpenAIRE

    Skovgaard, Maja; Felbo-Kolding, Mia; Larsen, Peter Hjorth

    2007-01-01

    Strategic Corporate Social Responsibility communication has become a big challenge for companies today. Increasingly, investors, NGO’s, B2B customers and consumers want the companies to engage in CSR activities and to document and communicate them. But CSR communication is complicated by the fact that stakeholders not always want to hear about the companies’ efforts. Companies are often perceived as self-absorbed and are met with scepticism when they communicate their CSR efforts. In this pro...

  11. Steering the magnetic properties of Ni/NiO/CoO core-shell nanoparticle films: The role of core-shell interface versus interparticle interactions

    Science.gov (United States)

    Ponti, Alessandro; Ferretti, Anna M.; Capetti, Elena; Spadaro, Maria Chiara; Bertoni, Giovanni; Grillo, Vincenzo; Luches, Paola; Valeri, Sergio; D'Addato, Sergio

    2017-08-01

    Supported core-shell Ni/NiO/CoO nanoparticle (NP) films were obtained by deposition of preformed and mass-selected Ni NPs on a buffer layer of CoO, followed by a top CoO layer. The resulting NPs have core/shell morphology, with a McKay icosahedral Ni core and a partially crystalline CoO shell. X-ray photoelectron spectroscopy evidenced the presence of a thin NiO layer, which was shown to be between the Ni core and the CoO shell by elemental TEM mapping. CoO and NiO shells with different thickness values were obtained, allowing us to investigate the evolution of the magnetic properties of the NP assemblies as a function of the oxide shell thickness. Both exchange-coupling and magnetostatic interactions significantly contribute to the magnetic behavior of Ni/NiO/CoO NP films. After the Ni/NiO/CoO NPs are cooled in a weak magnetic field, they have blocking temperature higher than room temperature because of strong magnetostatic interactions, which support the formation of a spin-glass-like state below ˜250 K . Exchange coupling dominates the magnetic behavior after the NPs are cooled in a strong magnetic field. The exchange bias (EB) is in the 0.17-2.35 kOe range and strongly depends on the CoO thickness (0.4-2.7 nm), showing the onset of the EB at the few-nanometer scale. The switching field distribution showed that the EB opposes the magnetization reversal from the direction along the cooling field but it does not significantly ease the opposite process. The EB depends on tCoO only for tNiO≤0.5 nm , but when NiO is 0.7 nm thick it strongly interacts with CoO and a large increase of the EB and coercivity is observed.

  12. X-ray photoelectron spectroscopy studies on core-shell structured nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Mukherjee, M. [Surface Physics Division, Saha Institute of Nuclear Physics, Kolkata 700064 (India); Basu, S.; Ghosh, B. [Unit on Nano Science, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700032 (India); Chakravorty, D. [Unit on Nano Science, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700032 (India)], E-mail: mlsdc@iacs.res.in

    2007-08-15

    Core-shell nanostructures were grown in silica-based glasses. Copper-copper oxide and iron-iron oxide structures had diameters in the range 3-6 nm, with shell thicknesses {approx}1-2 nm. Silver-lithium niobate core-shell nanostructures had diameters in the range 4.2-46 nm and thicknesses varying from 2.2 to 22 nm. X-ray photoelectron spectroscopy studies were carried out on all these specimens. The analyses of these results show the presence of Cu{sup +}/Cu{sup 2+}, Fe{sup 2+}/Fe{sup 3+} and Nb{sup 4+}/Nb{sup 5+} valence states in the above three systems. Electrical resistivity data were fitted satisfactorily to the small polaron hopping model in the case of copper and iron-containing specimens. The presence of ions in the lithium niobate shell provides direct evidence of the formation of localized states between which variable range hopping conduction can be effected.

  13. Energy Migration Upconversion in Ce(III)-Doped Heterogeneous Core-Shell-Shell Nanoparticles.

    Science.gov (United States)

    Chen, Xian; Jin, Limin; Sun, Tianying; Kong, Wei; Yu, Siu Fung; Wang, Feng

    2017-07-19

    One major challenge in upconversion research is to develop new materials and structures to expand the emission spectrum. Herein, a heterogeneous core-shell-shell nanostructure of NaYbF4 :Gd/Tm@NaGdF4 @CaF2 :Ce is developed to realize efficient photon upconversion in Ce(3+) ions through a Gd-mediated energy migration process. The design takes advantage of CaF2 host that reduces the 4f-5d excitation frequency of Ce(3+) to match the emission line of Gd(3+) . Meanwhile, CaF2 is isostructural with NaGdF4 and can form a continuous crystalline lattice with the core layer. As a result, effective Yb(3+) → Tm(3+) → Gd(3+) → Ce(3+) energy transfer can be established in a single nanoparticle. This effect enables efficient ultraviolet emission of Ce(3+) following near infrared excitation into the core layer. The Ce(3+) upconversion emission achieved in the core-shell-shell nanoparticles features broad bandwidth and long lifetime, which offers exciting opportunities of realizing tunable lasing emissions in the ultraviolet spectral region. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Simulations of the Light Scattering Properties of Metal/Oxide Core/Shell Nanospheres

    Directory of Open Access Journals (Sweden)

    F. Ruffino

    2014-01-01

    Full Text Available Given the importance of the optical properties of metal/dielectric core/shell nanoparticles, in this work we focus our attention on the light scattering properties, within the Mie framework, of some specific categories of these noteworthy nanostructures. In particular, we report theoretical results of angle-dependent light scattering intensity and scattering efficiency for Ag/Ag2O, Al/Al2O2, Cu/Cu2O, Pd/PdO, and Ti/TiO2 core/shell nanoparticles as a function of the core radius/shell thickness ratio and on a relative comparison. The results highlight the light scattering characteristics of these systems as a function of the radius/shell thickness ratio, helping in the choice of the more suitable materials and sizes for specific applications (i.e., dynamic light scattering for biological and molecular recognition, increasing light trapping in thin-film silicon, organic solar cells for achieving a higher photocurrent.

  15. Core-shell amorphous silicon-carbon nanoparticles for high performance anodes in lithium ion batteries

    Science.gov (United States)

    Sourice, Julien; Bordes, Arnaud; Boulineau, Adrien; Alper, John P.; Franger, Sylvain; Quinsac, Axelle; Habert, Aurélie; Leconte, Yann; De Vito, Eric; Porcher, Willy; Reynaud, Cécile; Herlin-Boime, Nathalie; Haon, Cédric

    2016-10-01

    Core-shell silicon-carbon nanoparticles are attractive candidates as active material to increase the capacity of Li-ion batteries while mitigating the detrimental effects of volume expansion upon lithiation. However crystalline silicon suffers from amorphization upon the first charge/discharge cycle and improved stability is expected in starting with amorphous silicon. Here we report the synthesis, in a single-step process, of amorphous silicon nanoparticles coated with a carbon shell (a-Si@C), via a two-stage laser pyrolysis where decomposition of silane and ethylene are conducted in two successive reaction zones. Control of experimental conditions mitigates silicon core crystallization as well as formation of silicon carbide. Auger electron spectroscopy and scanning transmission electron microscopy show a carbon shell about 1 nm in thickness, which prevents detrimental oxidation of the a-Si cores. Cyclic voltammetry demonstrates that the core-shell composite reaches its maximal lithiation during the first sweep, thanks to its amorphous core. After 500 charge/discharge cycles, it retains a capacity of 1250 mAh.g-1 at a C/5 rate and 800 mAh.g-1 at 2C, with an outstanding coulombic efficiency of 99.95%. Moreover, post-mortem observations show an electrode volume expansion of less than 20% and preservation of the nanostructuration.

  16. Synthesis and Characterization of Core-shell ZrO2/PAAEM/PS Nanoparticles

    Directory of Open Access Journals (Sweden)

    Jiang XC

    2008-01-01

    Full Text Available Abstract This work demonstrates the synthesis of core-shell ZrO2/PAAEM/PS nanoparticles through a combination of sol–gel method and emulsifier-free emulsion polymerizaiton. By this method, the modified nanometer ZrO2cores were prepared by chemical modification at a molecular level of zirconium propoxide with monomer of acetoacetoxyethylmethacrylate (AAEM, and then copolymerized with vinyl monomer to form uniform-size hybrid nanoparticles with diameter of around 250 nm. The morphology, composition, and thermal stability of the core-shell particles were characterized by various techniques including transmission electron microscopy (TEM, X-ray diffractometer (XRD, Fourier transform infrared spectroscopy (FTIR, X-ray photoelectron spectroscopy (XPS, and thermal-gravimetry analyzer (TGA. The results indicate that the inorganic–organic nanocomposites exhibit good thermal stability with the maximum decomposition temperature of ~447 °C. This approach would be useful for the synthesis of other inorganic–organic nanocomposites with desired functionalities.

  17. Tegafur loading and release properties of magnetite/poly(alkylcyanoacrylate) (core/shell) nanoparticles.

    Science.gov (United States)

    Arias, José L; Ruiz, M Adolfina; Gallardo, Visitación; Delgado, Angel V

    2008-01-01

    In this work, we describe a reproducible method to prepare polymeric colloidal nanospheres of poly(ethyl-2-cyanoacrylate), poly(butylcyanoacrylate), poly(hexylcyanoacrylate) and poly(octylcyanoacrylate) with a magnetite core, and loaded with the anticancer drug Tegafur. The method is based on the emulsion polymerization procedure, often used in the synthesis of poly(alkylcyanoacrylate) nanospheres for drug delivery. The heterogeneous structure of the particles confer them both magnetic-field responsiveness and potential applicability as drug carriers. In order to investigate to what extent is this target achieved, we compare the surface electrical properties of the core/shell particles with those of both the nucleus and the coating material. The hysteresis cycles of both magnetite and composite particles demonstrate that the polymer shell reduces the magnetic responsiveness of the particles, but keeps their soft ferrimagnetic character unchanged. A detailed investigation of the capabilities of the core/shell particles to load this drug is shown. We found, by means of spectrophotometric and electrophoretic measurements, the existence of two drug loading mechanisms: absorption or entrapment in the polymeric network, and surface adsorption. The type of polymer, the pH and the drug concentration are the main factors determining the drug incorporation to the nanoparticles. The release studies showed a biphasic profile affected by the type of polymeric shell, the type of drug incorporation and the amount of drug loaded.

  18. Synthesis and characterization of Fe3O4-TiO2 core-shell nanoparticles

    Science.gov (United States)

    Stefan, M.; Pana, O.; Leostean, C.; Bele, C.; Silipas, D.; Senila, M.; Gautron, E.

    2014-09-01

    Composite core-shell nanoparticles may have morpho-structural, magnetic, and optical (photoluminescence (PL)) properties different from each of the components considered separately. The properties of Fe3O4-TiO2 nanoparticles can be controlled by adjusting the titania amount (shell thinness). Core-shell nanoparticles were prepared by seed mediated growth of semiconductor (TiO2) through a modified sol-gel process onto preformed magnetite (Fe3O4) cores resulted from the co-precipitation method. The structure and morphology of samples were characterized by X-ray diffraction, transmission electron microscopy (TEM), and high resolution-TEM respectively. X-ray photoelectron spectroscopy was correlated with ICP-AES. Magnetic measurements, optical absorption spectra, as well as PL spectroscopy indicate the presence of a charge/spin transfer from the conduction band of magnetite into the band gap of titania nanocrystals. The process modifies both Fe3O4 and TiO2 magnetic and optical properties, respectively.

  19. Fabry-Perot Microcavity Modes in Single GaP/GaNP Core/Shell Nanowires.

    Science.gov (United States)

    Dobrovolsky, Alexander; Stehr, Jan E; Sukrittanon, Supanee; Kuang, Yanjin; Tu, Charles W; Chen, Weimin M; Buyanova, Irina A

    2015-12-16

    Semiconductor nanowires (NWs) are attracting increasing interest as nanobuilding blocks for optoelectronics and photonics. A novel material system that is highly suitable for these applications are GaNP NWs. In this article, we show that individual GaP/GaNP core/shell nanowires (NWs) grown by molecular beam epitaxy on Si substrates can act as Fabry-Perot (FP) microcavities. This conclusion is based on results of microphotoluminescence (μ-PL) measurements performed on individual NWs, which reveal periodic undulations of the PL intensity that follow an expected pattern of FP cavity modes. The cavity is concluded to be formed along the NW axis with the end facets acting as reflecting mirrors. The formation of the FP modes is shown to be facilitated by an increasing index contrast with the surrounding media. Spectral dependence of the group refractive index is also determined for the studied NWs. The observation of the FP microcavity modes in the GaP/GaNP core/shell NWs can be considered as a first step toward achieving lasing in this quasidirect bandgap semiconductor in the NW geometry.

  20. No-Core Shell Model for 48-Ca, 48-Sc and 48-Ti

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, S; Stoica, S; Vary, J P; Navratil, P

    2004-10-26

    The authors report the first no-core shell model results for {sup 48}Ca, {sup 48}Sc and {sup 48}Ti with derived and modified two-body Hamiltonians. We use an oscillator basis with a limited {bar h}{Omega} range around 40/A{sup 1/3} = 11 MeV and a limited model space up to 1 {bar h}{Omega}. No single-particle energies are used. They find that the charge dependence of the bulk binding energy of eight A = 48 nuclei is reasonably described with an effective Hamiltonian derived from the CD-Bonn interaction while there is an overall underbinding by about 0.4 MeV/nucleon. However, resulting spectra exhibit deficiencies that are anticipated due to: (1) basis space limitations and/or the absence of effective many-body interactions; and, (2) the absence of genuine three-nucleon interactions. They introduce phenomenological modifications to obtain fits to total binding and low-lying spectra. The resulting no-core shell model opens a path for applications to experiments such as the double-beta ({beta}{beta}) decay process.

  1. Efficient synthetic access to thermo-responsive core/shell nanoparticles

    Science.gov (United States)

    Dine, Enaam Jamal Al; Ferjaoui, Zied; Roques-Carmes, Thibault; Schjen, Aleksandra; Meftah, Abdelaziz; Hamieh, Tayssir; Toufaily, Joumana; Schneider, Raphaël; Gaffet, Eric; Alem, Halima

    2017-03-01

    Core/shell nanostructures based on silica, fluorescent ZnO quantum dots (QDs) and superparamagnetic Fe3O4 nanoparticles (NPs) were prepared and fully characterized by the combination of different techniques and the physical properties of the nanostructures were studied. We demonstrate the efficiency of the atom transfer radical polymerization with activators regenerated by electron transfer process to graft (co-)polymers of different structures and polarity at the surface of metal oxide NPs. The influence of the polymer chain configuration on the optical properties of the ZnO/polymer core/shell QDs was enlightened. Concerning the magnetic properties of the Fe3O4/polymer nanostructures, only the amount of the grafted polymer plays a role on the saturation magnetization of the NPs and no influence of the aggregation was evidenced. The simple and fast process described in this work is efficient for the grafting of copolymers from surfaces and the derived NPs display the combination of the physical properties of the core and the macromolecular behavior of the shell.

  2. Effect of reaction time on formation of silica core/shell particles

    Directory of Open Access Journals (Sweden)

    Milan P. Nikolić

    2015-12-01

    Full Text Available The silica core/shell nanostructures were prepared by a wet-chemical process. Silica core particles were prepared by hydrolysis and condensation of tetraethylorthosilicate. The obtained particles (average size ∼0.4 µm were used as templates for assembling of silica nanoparticles generated from highly basic sodium silicate solution. The silica core particles were functionalized with 3-aminopropyltriethoxysilane (APTES to allow electrostatic assembling of silica nanoparticles on the surface of silica core particles. In order to find the optimal conditions for synthesis of silica core/shell particles with mesoporous shells, the effect of reaction time on formation of silica nanoparticles was investigated. The effect of process parameters on generation and aggregation of silica nanoparticles prepared from highly basic sodium silicate solution was also investigated. It was shown that the size of silica nanoparticles and tendency towards aggregation increase with increasing the reaction time and temperature. These behaviours were reflected on the formation of mesoporous silica shell around silica core particles. Thin and uniform mesoporous silica layers were obtained if reaction times were kept short. When the reaction time was prolonged, the thicker and non-uniform shells were obtained.

  3. New method to evaluate optical properties of core-shell nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Renteria-Tapia, V. [Universidad de Guadalajara, Ameca, Departamento de Ciencias Naturales y Exactas, Centro Universitario de Los Valles (Mexico); Franco, A., E-mail: alfredofranco@fisica.unam.mx; Garcia-Macedo, J. [Universidad Nacional Autonoma de Mexico, Departamento de Estado Solido, Instituto de Fisica (Mexico)

    2012-06-15

    A new method is presented to calculate, for metallic core-dielectric shell nanostructures, the local refractive index, resonance condition, maximum spectral shift, plasma wavelength, and the sensitivity of the wavelength maximum to variations in the refractive index of the environment. The equations that describe these properties are directly related to the surface plasmon peak position, refractive index of the shell, and to the surrounding medium. The method is based on the approach that a layered core dispersed in a dielectric environment (core-shell model) can be figured out as an uncoated sphere dispersed in a medium with a local refractive index (local refractive index model). Thus, in the Mie theory, the same spectral position of the surface plasmon resonance peak can be obtained by varying the volume fraction of the shell or by varying the local refractive index. The assumed equivalence between plasmon resonance wavelengths enable us to show that the local refractive index depends geometrically on the shell volume fraction. Hence, simple relationships between optical and geometrical properties of these core-shell nanostructures are obtained. Furthermore, good agreement is observed between the new relationships and experimental data corresponding to gold nanoparticles (radius = 7.5 nm) covered with silica shells (with thicknesses up to 29.19 nm), which insured that the equivalence hypothesis is correct.

  4. GaAs/InAs - core/shell nanowires grown by SA-MOVPE

    Energy Technology Data Exchange (ETDEWEB)

    Haas, Fabian; Sladek, Kamil; Winden, Andreas; Ahe, Martina von der; Hardtdegen, Hilde; Gruetzmacher, Detlev [Peter Gruenberg Institute-9, Forschungszentrum Juelich (Germany); JARA-Fundamentals of Future Information Technology (Germany); Weirich, Thomas [JARA-Fundamentals of Future Information Technology (Germany); GFE, Gemeinschaftslabor fuer Elektronenmikroskopie, 52074 Aachen (Germany)

    2012-07-01

    GaAs/InAs - core/shell nanowires could show interesting low-dimensional phenomena because of the expected intrinsic conductivity in the tubular low-bandgap InAs shells. However, suitable parameters for homogeneous radial growth of InAs on GaAs nanowires are still to be developed. In this contribution we report on the heteroepitaxial growth of GaAs/InAs-core/shell nanowires via selective-area metalorganic vapor phase epitaxy (SA-MOVPE). GaAs core nanowires were grown on hole-patterned SiO{sub 2}/GaAs(111)B templates, structured by thermal nanoimprint lithography, and subsequently covered with a conformal InAs shell. The influence of the growth temperature (400 C to 650 C) on shell morphology, homogeneity and crystal structure was investigated by scanning and transmission electron microscopy. It was found that the desired homogeneous and uniform InAs overgrowth is achieved at lower growth temperatures. The InAs shell adopted the morphology and crystal structure of the underlying GaAs core and dislocations at the GaAs/InAs interface were observed. At higher temperatures, the shell formed additional sidewall facets.

  5. Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization

    Institute of Scientific and Technical Information of China (English)

    Ji Shuai Wang; Wei Deng; Yun Shen Chen; Cheng You Kan

    2010-01-01

    In this study,P(St-MAA)seed latex particles were first prepared via soap-free emulsion polymerization of styrene(St)and methacrylic acid(MAA),then the seed particles were allowed to swell with St at room temperature,and the P(St-MAA)/P(St-NaSS)core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate(NaSS)using AIBN as initiator in the presence of N,N'-methylenebisacrylamide(BAA,water-soluble crosslinker).Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%,the narrow dispersed P(St-MAA)seed particles with the diameter of 150 nm and the P(St-MAA)/P(St-NaSS)core/shell latexes with the particle size of about 200 nm were synthesized.When the 25/75 mole ratio of NaSS/(St+MAA)and 2 mol% of BAA were used in the seeded emulsion polymerization,the resulted P(St-MAA)/P(St-NaSS)latex product showed a low weight loss after water extraction,and the NaSS unit content in the whole particle and in the shell reached 11.7 mol% and 34.6 mol%,respectively.

  6. Preparation and mechanical property of core-shell type chitosan/calcium phosphate composite fiber

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Atsushi [Japan Society for the Promotion of Science, Ikenohata1-1-1, Daitou-ku, Tokyo 110-0008 (Japan) and Creative Research Initiative ' Sousei' , Hokkaido University, Sapporo, Hokkaido 001-0021 (Japan)]. E-mail: MATSUDA.Atsushi@nims.go.jp; Ikoma, Toshiyuki [Biomaterials Research Center, National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044 (Japan); Kobayashi, Hisatoshi [Biomaterials Research Center, National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044 (Japan)]. E-mail: Kobayashi.Hisatoshi@nims.go.jp; Tanaka, Junzo [Creative Research Initiative ' Sousei' , Hokkaido University, Sapporo, Hokkaido 001-0021 (Japan); Biomaterials Research Center, National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044 (Japan)

    2004-12-01

    Core-shell type chitosan/calcium phosphate composite fibers were prepared by a facile wet spinning method; the chitosan aqueous solution with PO{sub 4} ions was dropped and coagulated in the ethanol/calcium hydroxide solutions at different mixed ratio. X-ray diffraction (XRD) patterns indicated that the crystal phases of calcium phosphates in the composite fibers were a low-crystalline hydroxyapatite (HAp; Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2})or the low-crystalline hydroxyapatite/brushite mixture depended on the ratio of ethanol/calcium hydroxide solutions. The inorganic contents were ca. 60 wt.% by using the TG-DTA analysis. The energy-dispersive X-ray spectroscopy (EDS) analysis indicated that Ca and P atoms were mainly distributed on the outer layer of the composite fiber to grow calcium phosphate crystals; however, a little amount of P atom still remained at the inside of the fiber. This indicated that the composite fibers formed a unique core-shell structure with shell of calcium phosphate and core of chitosan. The mechanical property of the fibers was reinforced by the initial concentration of chitosan solution.

  7. Highly stable supercapacitors with conducting polymer core-shell electrodes for energy storage applications

    KAUST Repository

    Xia, Chuan

    2015-01-14

    Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni-RuO2 core-shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO2 grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni-RuO2 core-shell nanostructured electrodes, exhibit very high specific capacitance (710 F g-1 at 5 mV s-1) and power density (42.2 kW kg-1) at an energy density of 10 Wh kg-1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g-1, superior to that of pristine PAni-based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal-oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.

  8. ASAXS study on the formation of core-shell Ag/Au nanoparticles in glass

    Energy Technology Data Exchange (ETDEWEB)

    Haug, J; Kruth, H; Dubiel, M [Martin-Luther-University Halle-Wittenberg, Institute of Physics, Von-Danckelmann-Platz 3, D-06120 Halle (Germany); Hofmeister, H [Max Planck Institute of Microstructure Physics, Weinberg 2, D-06120 Halle (Germany); Haas, S; Tatchev, D; Hoell, A, E-mail: joerg.haug@physik.uni-halle.de [Helmholtz-Zentrum Berlin fuer Materialien und Energie, Institute of Applied Materials, Glienicker Strasse 100, D-14109 Berlin (Germany)

    2009-12-16

    Nanosized metal particles of various configurations embedded in surface regions of glass have great potential as nonlinear optical materials for photonic devices. We have prepared Ag/Au nanoparticles in core-shell configuration in soda-lime silicate glass by double-ion implantation and investigated their structural characteristics by anomalous small-angle x-ray scattering (ASAXS) and transmission electron microscopy. Measurements at x-ray energies slightly below the Au L{sub 3} edge indicate the formation of bimetallic Ag/Au shells in some of the nanoparticles for high-dose ion implantation. An element-specific analysis of the ASAXS results allowed us not only to validate and quantify the core-shell structure, but simultaneously also the composition of the shells. Hollow nanoparticles were found for an Au-Ag implantation sequence, whereas an Ag-Au sequence generates a diluted core composition. The shift of the maximum position of optical absorption of the samples due to surface plasmon resonance of bimetallic nanoparticles, as monitored by optical spectroscopy, revealed the considerable influence of the respective particle configuration.

  9. Stress-driven buckling patterns in spheroidal core/shell structures.

    Science.gov (United States)

    Yin, Jie; Cao, Zexian; Li, Chaorong; Sheinman, Izhak; Chen, Xi

    2008-12-09

    Many natural fruits and vegetables adopt an approximately spheroidal shape and are characterized by their distinct undulating topologies. We demonstrate that various global pattern features can be reproduced by anisotropic stress-driven buckles on spheroidal core/shell systems, which implies that the relevant mechanical forces might provide a template underpinning the topological conformation in some fruits and plants. Three dimensionless parameters, the ratio of effective size/thickness, the ratio of equatorial/polar radii, and the ratio of core/shell moduli, primarily govern the initiation and formation of the patterns. A distinct morphological feature occurs only when these parameters fall within certain ranges: In a prolate spheroid, reticular buckles take over longitudinal ridged patterns when one or more parameters become large. Our results demonstrate that some universal features of fruit/vegetable patterns (e.g., those observed in Korean melons, silk gourds, ribbed pumpkins, striped cavern tomatoes, and cantaloupes, etc.) may be related to the spontaneous buckling from mechanical perspectives, although the more complex biological or biochemical processes are involved at deep levels.

  10. Room temperature nanojoining of Cu-Ag core-shell nanoparticles and nanowires

    Science.gov (United States)

    Wang, Jiaqi; Shin, Seungha

    2017-02-01

    Room temperature ( T room, 300 K) nanojoining of Ag has been widely employed in fabrication of microelectronic applications where the shapes and structures of microelectronic components must be maintained. In this research, the joining processes of pure Ag nanoparticles (NPs), Cu-Ag core-shell NPs, and nanowires (NWs) are studied using molecular dynamics simulations at T room. The evolution of densification, potential energy, and structural deformation during joining process are analyzed to identify joining mechanisms. Depending on geometry, different joining mechanisms including crystallization-amorphization, reorientation, Shockley partial dislocation are determined. A three-stage joining scenario is observed in both joining process of NPs and NWs. Besides, the Cu core does not participate in all joining processes, however, it enhances the mobility of Ag shell atoms, contributing to a higher densification and bonding strength at T room, compared with pure Ag nanomaterials. The tensile test shows that the nanojoint bears higher rupture strength than the core-shell NW itself. This study deepens understanding in the underlying joining mechanisms and thus nanojoint with desirable thermal, electrical, and mechanical properties could be potentially achieved.

  11. Faceting control in core-shell GaN micropillars using selective epitaxy

    Directory of Open Access Journals (Sweden)

    Sergiy Krylyuk

    2014-10-01

    Full Text Available We report on the fabrication of large-area, vertically aligned GaN epitaxial core-shell micropillar arrays. The two-step process consists of inductively coupled plasma (ICP etching of lithographically patterned GaN-on-Si substrate to produce an array of micropillars followed by selective growth of GaN shells over these pillars using Hydride Vapor Phase Epitaxy (HVPE. The most significant aspect of the study is the demonstration of the sidewall facet control in the shells, ranging from {1 1 ̄ 01} semi-polar to {1 1 ̄ 00} non-polar planes, by employing a post-ICP chemical etch and by tuning the HVPE growth temperature. Room-temperature photoluminescence, cathodoluminescence, and Raman scattering measurements reveal substantial reduction of parasitic yellow luminescence as well as strain-relaxation in the core-shell structures. In addition, X-ray diffraction indicates improved crystal quality after the shell formation. This study demonstrates the feasibility of selective epitaxy on micro-/nano- engineered templates for realizing high-quality GaN-on-Si devices.

  12. Core-shell microstructured nanocomposites for synergistic adjustment of environmental temperature and humidity

    Science.gov (United States)

    Zhang, Haiquan; Yuan, Yanping; Zhang, Nan; Sun, Qingrong; Cao, Xiaoling

    2016-11-01

    The adjustment of temperature and humidity is of great importance in a variety of fields. Composites that can perform both functions are prepared by mixing phase change materials (PCMs) with hygroscopic materials. However, the contact area between the adsorbent and humid air is inevitably decreased in such structures, which reduces the number of mass transfer channels for water vapor. An approach entailing the increase in the mass ratio of the adsorbent is presented here to improve the adsorption capacity. A core-shell CuSO4/polyethylene glycol (PEG) nanomaterial was developed to satisfy the conflicting requirements of temperature control and dehumidification. The results show that the equilibrium adsorption capacity of the PEG coating layer was enhanced by a factor of 188 compared with that of the pure PEG powder. The coating layer easily concentrates vapor, providing better adsorption properties for the composite. Furthermore, the volume modification of the CuSO4 matrix was reduced by 80% by the PEG coated layer, a factor that increases the stability of the composite. For the phase change process, the crystallization temperature of the coating layer was adjusted between 37.2 and 46.3 °C by interfacial tension. The core-shell CuSO4/PEG composite reported here provides a new general approach for the simultaneous control of temperature and humidity.

  13. Synthesis of core-shell gold coated magnetic nanoparticles and their interaction with thiolated DNA.

    Science.gov (United States)

    Robinson, Ian; Tung, Le D; Maenosono, Shinya; Wälti, Christoph; Thanh, Nguyen T K

    2010-12-01

    Core-shell magnetic nanoparticles have received significant attention recently and are actively investigated owing to their large potential for a variety of applications. Here, the synthesis and characterization of bimetallic nanoparticles containing a magnetic core and a gold shell are discussed. The gold shell facilitates, for example, the conjugation of thiolated biological molecules to the surface of the nanoparticles. The composite nanoparticles were produced by the reduction of a gold salt on the surface of pre-formed cobalt or magnetite nanoparticles. The synthesized nanoparticles were characterized using ultraviolet-visible absorption spectroscopy, transmission electron microscopy, energy dispersion X-ray spectroscopy, X-ray diffraction and super-conducting quantum interference device magnetometry. The spectrographic data revealed the simultaneous presence of cobalt and gold in 5.6±0.8 nm alloy nanoparticles, and demonstrated the presence of distinct magnetite and gold phases in 9.2±1.3 nm core-shell magnetic nanoparticles. The cobalt-gold nanoparticles were of similar size to the cobalt seed, while the magnetite-gold nanoparticles were significantly larger than the magnetic seeds, indicating that different processes are responsible for the addition of the gold shell. The effect on the magnetic properties by adding a layer of gold to the cobalt and magnetite nanoparticles was studied. The functionalization of the magnetic nanoparticles is demonstrated through the conjugation of thiolated DNA to the gold shell.

  14. Investigation of trapped metallo-dielectric core-shell colloidal particles using soft X-rays

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Christina [Physikalische Chemie, Freie Universitaet Berlin, Takustr. 3, D-14195 Berlin (Germany)], E-mail: cmgraf@chemie.fu-berlin.de; Langer, Burkhard [Physikalische Chemie, Freie Universitaet Berlin, Takustr. 3, D-14195 Berlin (Germany); Grimm, Michael [Institut fuer Physikalische Chemie, Universitaet Wuerzburg, Am Hubland, D-97074 Wuerzburg (Germany); Lewinski, Rene [Physikalische Chemie, Freie Universitaet Berlin, Takustr. 3, D-14195 Berlin (Germany); Grom, Melanie [Institut fuer Physikalische Chemie, Universitaet Wuerzburg, Am Hubland, D-97074 Wuerzburg (Germany); Ruehl, Eckart [Physikalische Chemie, Freie Universitaet Berlin, Takustr. 3, D-14195 Berlin (Germany)], E-mail: ruehl@chemie.fu-berlin.de

    2008-11-15

    The charging mechanisms of free silica nanoparticles coated with a thin (40 nm) gold shell are investigated. These are excited in the soft X-ray regime at different photon energies. The results are compared to the charging behavior of neat silica particles. The absolute charge state of the particles is measured and the electron emission probability is derived. Significant differences in the charging behavior are observed due to the metal layer, especially an increased number of emitted electrons per absorbed photon. The mechanisms of particle charging in these core-shell systems are discussed at different excitation energies, reaching up to 500 eV. They are due to secondary electron emission, the emission of photoelectrons, and the emission of electrons from rough metal surfaces. There are also significant changes in the charging current. Neat silica particles show a distinct near-edge feature in the O 1s-regime (520-580 eV). In contrast, gold-coated particles do not show any evidence for changes in particle charge due to resonant O 1s-absorption. This implies that properties of thin films in core-shell particles can be sensitively probed by single, trapped nanoparticles.

  15. Fast-dissolving core-shell composite microparticles of quercetin fabricated using a coaxial electrospray process.

    Directory of Open Access Journals (Sweden)

    Chen Li

    Full Text Available This study reports on novel fast-dissolving core-shell composite microparticles of quercetin fabricated using coaxial electrospraying. A PVC-coated concentric spinneret was developed to conduct the electrospray process. A series of analyses were undertaken to characterize the resultant particles in terms of their morphology, the physical form of their components, and their functional performance. Scanning and transmission electron microscopies revealed that the microparticles had spherical morphologies with clear core-shell structure visible. Differential scanning calorimetry and X-ray diffraction verified that the quercetin active ingredient in the core and sucralose and sodium dodecyl sulfate (SDS excipients in the shell existed in the amorphous state. This is believed to be a result of second-order interactions between the components; these could be observed by Fourier transform infrared spectroscopy. In vitro dissolution and permeation studies showed that the microparticles rapidly released the incorporated quercetin within one minute, and had permeation rates across the sublingual mucosa around 10 times faster than raw quercetin.

  16. Synthesis of Pt-Sn core-shell nanoparticles deposited on SBA-15 modified

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez-Contreras, L.; Alonso-Lemus, I. [Centro de Investigacion en Materiales Avanzados S.C., Laboratorio Nacional de Nanotecnologia (Mexico); Botte, G. G. [Ohio University, Center for Electrochemical Engineering Research, Department of Chemical and Biomolecular Engineering (United States); Verde-Gomez, Y., E-mail: ysmaelverde@yahoo.com [Instituto Tecnologico de Cancun (Mexico)

    2013-07-15

    A novel one-step synthesis method to prepare Pt-Sn bimetallic nanoparticles supported on mesoporous silica with high surface area (SBA-15, 700 m{sup 2}/g) and narrow pore size distribution (around 9.5 nm) was developed. Tin incorporation plays an important dual role, to create active sites into the silica walls that serve as particles anchors center, and to grow Pt-Sn core-shell nanoparticles. High-resolution transmission and scanning electron microscopy, and X-ray diffraction pattern confirm the formation of the Pt-Sn core-shell type nanoparticles ( Almost-Equal-To 1-10 nm). The metal loading was 2.2 and 2.3 wt% for Pt and Sn, respectively. Electron microscopy results show that the metal nanoparticles were deposited not only on the matrix, but also inside of it. Structural, textural, and morphological features of the SBA-15 were slightly affected after the nanoparticles deposition, maintaining its high surface area. The results obtained suggest that Pt-Sn on SBA-15 could be attractive material for several catalytic applications, due to the narrow particle size distribution achieved (from 1 to 10 nm) the high dispersion on the support, as well as the Pt-Sn alloy developed.Graphical Abstract.

  17. Carboxymethyl chitosan-poly(amidoamine) dendrimer core-shell nanoparticles for intracellular lysozyme delivery.

    Science.gov (United States)

    Zhang, Xiaoyang; Zhao, Jun; Wen, Yan; Zhu, Chuanshun; Yang, Jun; Yao, Fanglian

    2013-11-06

    Intracellular delivery of native, active proteins is challenging due to the fragility of most proteins. Herein, a novel polymer/protein polyion complex (PIC) nanoparticle with core-shell structure was prepared. Carboxymethyl chitosan-grafted-terminal carboxyl group-poly(amidoamine) (CM-chitosan-PAMAM) dendrimers were synthesized by amidation and saponification reactions. (1)H NMR was used to characterize CM-chitosan-PAMAM dendrimers. The TEM images and results of lysozyme loading efficiency indicated that CM-chitosan-PAMAM dendrimers could self-assemble into core-shell nanoparticles, and lysozyme was efficiently encapsulated inside the core of CM-chitosan-PAMAM dendrimer nanoparticles. Activity of lysozyme was completely inhibited by CM-chitosan-PAMAM Dendrimers at physiological pH, whereas it was released into the medium and exhibited a significant enzymatic activity in an acidic intracellular environment. Moreover, the CM-chitosan-PAMAM dendrimer nanoparticles did not exhibit significant cytotoxicity in the range of concentrations below 3.16 mg/ml. The results indicated that these CM-chitosan-PAMAM dendrimers have excellent properties as highly potent and non-toxic intracellular protein carriers, which would create opportunities for novel applications in protein delivery.

  18. Preparation and Properties of PTFE-PMMA Core-Shell Nanoparticles and Nanocomposites

    Directory of Open Access Journals (Sweden)

    Diego Antonioli

    2012-01-01

    Full Text Available The preparation of polytetrafluoroethylene-poly(methyl methacrylate (PTFE-PMMA core-shell particles was described, featuring controlled size and narrow size distribution over a wide compositional range, through a seeded emulsion polymerization starting from a PTFE seed of 26 nanometers. Over the entire MMA/PTFE range, the particle size increases as the MMA/PTFE ratio increases. A very precise control over the particle size can be exerted by properly adjusting the ratio between the monomer and the PTFE seed. Particles in the 80–240 nm range can be prepared with uniformity indexes suited to build 2D and 3D colloidal crystals. These core-shell particles were employed to prepare nanocomposites with different compositions, through an annealing procedure at a temperature higher than the glass transition temperature of the shell forming polymer. A perfect dispersion of the PTFE particles within the PMMA matrix was obtained and optically transparent nanocomposites were prepared containing a very high PTFE amount.

  19. Gold/silver core-shell 20 nm nanoparticles extracted from citrate solution examined by XPS

    Energy Technology Data Exchange (ETDEWEB)

    Engelhard, Mark H.; Smith, Jordan N.; Baer, Donald R.

    2016-06-01

    Silver nanoparticles of many types are widely used in consumer and medical products. The surface chemistry of particles and the coatings that form during synthesis or use in many types of media can significantly impact the behaviors of particles including dissolution, transformation and biological or environmental impact. Consequently it is useful to be able to extract information about the thickness of surface coatings and other attributes of nanoparticles produced in a variety of ways. It has been demonstrated that X-ray Photoelectron Spectroscopy (XPS) can be reliably used to determine the thickness of organic and other nanoparticles coatings and shells. However, care is required to produce reliable and consistent information. Here we report the XPS spectra from gold/silver core-shell nanoparticles of nominal size 20 nm removed from a citrate saturated solution after one and two washing cycles. The Simulation of Electron Spectra for Surface Analysis (SESSA) program had been used to model peak amplitudes to obtain information on citrate coatings that remain after washing and demonstrate the presence of the gold core. This data is provided so that others can compare use of SESSA or other modeling approaches to quantify the nature of coatings to those already published and to explore the impacts particle non-uniformities on XPS signals from core-shell nanoparticles.

  20. Rational design of polymeric core shell ratiometric oxygen-sensing nanostructures.

    Science.gov (United States)

    Byrne, Aisling; Jacobs, Jaco; Burke, Christopher S; Martin, Aaron; Heise, Andreas; Keyes, Tia E

    2017-09-08

    A new approach for the fabrication of luminescent ratiometric sensing nanosensors is described using core-shell nanoparticles in which the probe and reference are spatially separated into the shell and core of the nanostructure respectively. The isolation of the reference in the core of the particle ensures a stable emission reference signal unaffected by the external environment. The core shell structure was prepared by engineering structurally well-defined Ru-conjugated block copolymers which acted as emulsifiers in the miniemulsion polymerisation of BODIPY loaded styrene nanoparticles. The resulting particles are highly stable and show excellent size monodispersity. The nanosensors exhibit dual emission under a single excitation wavelength with a reversible and quantitative ratiometric response to the O2 content in aqueous media. In the presence of a low concentration of CTAB, the particles cross the cell membrane and the particles show negligible cytotoxicity. Such an approach to sensor nanoparticles should be of value across a range of applications where a stable ratiometric signal in diverse environments is required.

  1. Removal of Zinc from Aqueous Solutions by Magnetite Silica Core-Shell Nanoparticles

    Directory of Open Access Journals (Sweden)

    Masoomeh Emadi

    2013-01-01

    Full Text Available Magnetite silica core-shell nanoparticles (Fe3O4-SiO2 were synthesized and evaluated as a nanoadsorbent for removing Zn(II from aqueous solutions. The core-shell nanoparticles were prepared by combining coprecipitation and sol-gel methods. Nanoparticles were characterized by X-ray diffraction, transmission electron microscopy (TEM, and FT-IR. The magnetization values of nanoparticles were measured with vibrating sample magnetometer (VSM. The adsorption of Zn(II ions was examined by batch equilibrium technique. The effects of pH, initial Zn(II concentration, and contact time on the efficiency of Zn(II removal were studied. The equilibrium data, analyzed by using Langmuir and Freundlich isotherm models, showed better agreement with the former model. Using the Langmuir isotherm model, maximum capacity of the nanoadsorbent for Zn(II was found to be 119 mg g−1 at room temperature. Kinetic studies were conducted and the resulting data were analyzed using first- and second-order equations; pseudo-second-order kinetic equation was found to provide the best correlation. The adsorption and sedimentation times were very low. The nanoadsorbent can be easily separated from aqueous solution by a magnet. Repeated adsorption acid regeneration cycles were performed to examine the stability and reusability of the nanoadsorbent. The result of this study proved high stability and reusability of Fe3O4-SiO2 as an adsorbent for Zn(II ions.

  2. The preparation of core-shell magnetic silica nanospheres for enhancing magnetism and fluorescence intensity.

    Science.gov (United States)

    Yoo, Jeong Ha; Kim, Jong Sung

    2013-11-01

    Recently, magnetic and luminescent composite silica with structure of micro- and nanospheres containing both magnetic (Fe3O4) nanoparticles (MPs) and quantum dots (QDs) has attracted great interests. In this study, we have prepared core-shell structure of silica spheres in which magnets are incorporated into silica core and QDs into a mesoporous silica shell by using C18-TMS (octade-cyltrimethoxysilane). MPs were synthesized by a co-precipitation method from ferrous and ferric solutions with a molecular ratio of 2:3. Monodisperse magnetic silica cores have been prepared via sol-gel reaction of TEOS (tetraethoxysilane) and water using base catalyst. The size of magnetic silica nanospheres was confirmed by dynamic laser light scattering system (DLS) and scanning electoron microscope (SEM). The pore volume and surface area were calculated by using BET after calcination. The core-shell structure plays an important role in providing more domains for MPs in silica Core and QDs in silica shell. QDs were incorporated into the mesoporous shell by hydrophobic interactions. Magnetic characterization was performed using a superconducting quantum interference device (SQUID). The optical properties of the particles were characterized with UV/Vis spectrometer, PL spectrometer, and fluorescence microscope.

  3. Vertical growth of core-shell III-V nanowires for solar cells application.

    Science.gov (United States)

    Kim, D Y; Bae, M H; Shin, J C; Kim, Y J; Lee, Y J; Choi, K J; Seong, T Y; Choi, W J

    2014-04-01

    High density (In)GaAs/GaAs/AIGaAs nanowires (NWs) consisting of n-type core and p-type shell have been vertically grown on (111) GaAs substrate using metal organic chemical vapor deposition (MOCVD) and fabricated into solar cells. Au colloidal nanoparticles (NPs) are employed as a catalyst. High density nanowires were obtained by uniform distribution of Au NPs. Fe-SEM, TEM and HRTEM images show that the morphology of shell is sensitive to p-doping concentration. Increase in the density of p-doping precursor results in "kinking" of NPs and rough shell surface. The origin of kinking has been explained by the GaAs twin phases due to Zn segregation on the surface of shell. It has been observed that the morphology of NPs can be controlled through optimizing various source purge technique of DEZn and deposition temperature. Electrical properties of core-shell doped NWs are carried out using I-V characterization. The core-shell NWs show characteristics of p-n junction as revealed by I-V studies.

  4. Tandem Core-Shell Si-Ta3N5 Photoanodes for Photoelectrochemical Water Splitting.

    Science.gov (United States)

    Narkeviciute, Ieva; Chakthranont, Pongkarn; Mackus, Adriaan J M; Hahn, Christopher; Pinaud, Blaise A; Bent, Stacey F; Jaramillo, Thomas F

    2016-12-14

    Nanostructured core-shell Si-Ta3N5 photoanodes were designed and synthesized to overcome charge transport limitations of Ta3N5 for photoelectrochemical water splitting. The core-shell devices were fabricated by atomic layer deposition of amorphous Ta2O5 onto nanostructured Si and subsequent nitridation to crystalline Ta3N5. Nanostructuring with a thin shell of Ta3N5 results in a 10-fold improvement in photocurrent compared to a planar device of the same thickness. In examining thickness dependence of the Ta3N5 shell from 10 to 70 nm, superior photocurrent and absorbed-photon-to-current efficiencies are obtained from the thinner Ta3N5 shells, indicating minority carrier diffusion lengths on the order of tens of nanometers. The fabrication of a heterostructure based on a semiconducting, n-type Si core produced a tandem photoanode with a photocurrent onset shifted to lower potentials by 200 mV. CoTiOx and NiOx water oxidation cocatalysts were deposited onto the Si-Ta3N5 to yield active photoanodes that with NiOx retained 50-60% of their maximum photocurrent after 24 h chronoamperometry experiments and are thus among the most stable Ta3N5 photoanodes reported to date.

  5. Structural and magnetic properties of core-shell Au/Fe3O4 nanoparticles

    Science.gov (United States)

    León Félix, L.; Coaquira, J. A. H.; Martínez, M. A. R.; Goya, G. F.; Mantilla, J.; Sousa, M. H.; Valladares, L. De Los Santos; Barnes, C. H. W.; Morais, P. C.

    2017-02-01

    We present a systematic study of core-shell Au/Fe3O4 nanoparticles produced by thermal decomposition under mild conditions. The morphology and crystal structure of the nanoparticles revealed the presence of Au core of d = (6.9 ± 1.0) nm surrounded by Fe3O4 shell with a thickness of ~3.5 nm, epitaxially grown onto the Au core surface. The Au/Fe3O4 core-shell structure was demonstrated by high angle annular dark field scanning transmission electron microscopy analysis. The magnetite shell grown on top of the Au nanoparticle displayed a thermal blocking state at temperatures below TB = 59 K and a relaxed state well above TB. Remarkably, an exchange bias effect was observed when cooling down the samples below room temperature under an external magnetic field. Moreover, the exchange bias field (HEX) started to appear at T~40 K and its value increased by decreasing the temperature. This effect has been assigned to the interaction of spins located in the magnetically disordered regions (in the inner and outer surface of the Fe3O4 shell) and spins located in the ordered region of the Fe3O4 shell.

  6. Design of Gas-phase Synthesis of Core-Shell Particles by Computational Fluid - Aerosol Dynamics.

    Science.gov (United States)

    Buesser, B; Pratsinis, S E

    2011-11-01

    Core-shell particles preserve the bulk properties (e.g. magnetic, optical) of the core while its surface is modified by a shell material. Continuous aerosol coating of core TiO2 nanoparticles with nanothin silicon dioxide shells by jet injection of hexamethyldisiloxane precursor vapor downstream of titania particle formation is elucidated by combining computational fluid and aerosol dynamics. The effect of inlet coating vapor concentration and mixing intensity on product shell thickness distribution is presented. Rapid mixing of the core aerosol with the shell precursor vapor facilitates efficient synthesis of hermetically coated core-shell nanoparticles. The predicted extent of hermetic coating shells is compared to the measured photocatalytic oxidation of isopropanol by such particles as hermetic SiO2 shells prevent the photocatalytic activity of titania. Finally the performance of a simpler, plug-flow coating model is assessed by comparisons to the present detailed CFD model in terms of coating efficiency and silica average shell thickness and texture.

  7. REPARATION AND FLUORESCENT PROPERTIES OF Eu3+-CONTAINING CORE-SHELL NANOPARTICLES

    Institute of Scientific and Technical Information of China (English)

    Zheng-hui Wang; Li-feng yan; Qing-shi Zhu

    2003-01-01

    By using a two-stage soapless emulsion polymerization, four kinds of core-shell nanoparticles have been prepared,which are composed of a polystyrene core having an average diameter of 256 nm and a poly(methyl methacrylate-co-acrylic acid) shell. The transmission electron microscopy (TEM) micrographs and the atomic force microscopy (AFM) images evidenced the presence of a core-shell structure. In the infrared spectra, the shift of VCOOH to lower wavenumber with increasing Eu3+ ion content indicates that coordination between the oxygen of the carboxylic group and Eu3+ has occurred.The fluorescence intensity of 5D0-7F2 transition was observed to reach its maximum with a carboxyl group molar percentage of 40% in the shell and an Eu3+/-COO- molar ratio of 1:3. The fluorescence intensity ratio of 5D0-7F2 to 5D0-7F1 transition reached its maximum with an Eu3+/-COO- molar ratio of 1:3 for all the four series.

  8. Polarization effects on spectra of spherical core/shell nanostructures: Perturbation theory against finite difference approach

    Energy Technology Data Exchange (ETDEWEB)

    Ibral, Asmaa [Equipe d' Optique et Electronique du Solide, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); Laboratoire d' Instrumentation, Mesure et Contrôle, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); Zouitine, Asmaa [Département de Physique, Ecole Nationale Supérieure d' Enseignement Technique, Université Mohammed V Souissi, B. P. 6207 Rabat-Instituts, Rabat, Royaume du Maroc (Morocco); Assaid, El Mahdi, E-mail: eassaid@yahoo.fr [Equipe d' Optique et Electronique du Solide, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); Laboratoire d' Instrumentation, Mesure et Contrôle, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B. P. 20 El Jadida principale, El Jadida, Royaume du Maroc (Morocco); and others

    2015-02-01

    Poisson equation is solved analytically in the case of a point charge placed anywhere in a spherical core/shell nanostructure, immersed in aqueous or organic solution or embedded in semiconducting or insulating matrix. Conduction and valence band-edge alignments between core and shell are described by finite height barriers. Influence of polarization charges induced at the surfaces where two adjacent materials meet is taken into account. Original expressions of electrostatic potential created everywhere in the space by a source point charge are derived. Expressions of self-polarization potential describing the interaction of a point charge with its own image–charge are deduced. Contributions of double dielectric constant mismatch to electron and hole ground state energies as well as nanostructure effective gap are calculated via first order perturbation theory and also by finite difference approach. Dependencies of electron, hole and gap energies against core to shell radii ratio are determined in the case of ZnS/CdSe core/shell nanostructure immersed in water or in toluene. It appears that finite difference approach is more efficient than first order perturbation method and that the effect of polarization charge may in no case be neglected as its contribution can reach a significant proportion of the value of nanostructure gap.

  9. Atrazine adsorption removal with nylon6/polypyrrole core-shell nanofibers mat: possible mechanism and characteristics

    Science.gov (United States)

    Yang, Bi-Yi; Cao, Yang; Qi, Fei-Fei; Li, Xiao-Qing; Xu, Qian

    2015-05-01

    A functionalized nylon6/polypyrrole core-shell nanofibers mat (PA6/PPy NFM) was prepared via situ polymerization on nylon6 electrospun nanofibers mat (PA6 NFM) template and used as an adsorbent to remove atrazine from aqueous solutions. The core-shell structure of PA6/PPy NFM can be clearly proved under scanning electron microscope (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The effects of initial solution pH and ionic strength, as well as the comparison of the adsorption capacity of functionalized (PA6/PPy NFM) and non-functionalized (PA6 NFM) adsorbent, were examined to reveal the possible adsorption mechanism. The results indicated that π-π interaction and electrostatic interaction should play a key role in the adsorption process. The kinetics and thermodynamics studies also further elucidated the detailed adsorption characteristics of atrazine removal by PA6/PPy NFM. The adsorption of atrazine could be well described by the pseudo-second-order equation. The adsorption equilibrium data was well fitted with the Freundlich isotherm model with a maximum adsorption capacity value of 14.8 mg/g. In addition, the increase of adsorption rate caused by a temperature increase could be felicitously explained by the endothermic reaction. The desorption results showed that the adsorption capacity remained almost unchanged after six adsorption/desorption cycles. These results suggest that PA6/PPy NFM could be employed as an efficient adsorbent for removing atrazine from contaminated water sources.

  10. Core-Shell Coating Silicon Anode Interfaces with Coordination Complex for Stable Lithium-Ion Batteries.

    Science.gov (United States)

    Zhou, Jinqiu; Qian, Tao; Wang, Mengfan; Xu, Na; Zhang, Qi; Li, Qun; Yan, Chenglin

    2016-03-02

    In situ core-shell coating was used to improve the electrochemical performance of Si-based anodes with polypyrrole-Fe coordination complex. The vast functional groups in the organometallic coordination complex easily formed hydrogen bonds when in situ modifying commercial Si nanoparticles. The incorporation of polypyrrole-Fe resulted in the conformal conductive coating surrounding each Si nanoparticle, not only providing good electrical connection to the particles but also promoting the formation of a stable solid-electrolyte-interface layer on the Si electrode surface, enhancing the cycling properties. As an anode material for Li-ion batteries, modified silicon powders exhibited high reversible capacity (3567 mAh/g at 0.3 A/g), good rate property (549.12 mAh/g at 12 A/g), and excellent cycling performance (reversible capacity of 1500 mAh/g after 800 cycles at 1.2 A/g). The constructed novel concept of core-shell coating Si particles presented a promising route for facile and large-scale production of Si-based anodes for extremely durable Li-ion batteries, which provided a wide range of applications in the field of energy storage of the renewable energy derived from the solar energy, hydropower, tidal energy, and geothermal heat.

  11. Core-shell structured PEO-chitosan nanofibers by coaxial electrospinning.

    Science.gov (United States)

    Pakravan, Mehdi; Heuzey, Marie-Claude; Ajji, Abdellah

    2012-02-13

    Core-shell structured PEO-chitosan nanofibers have been produced using a coaxial electrospinning setup. PEO and chitosan solutions, both in an aqueous acetic acid solvent, were used as the inner (core) and outer (shell) layer, respectively. Uniform-sized defect-free nanofibers of 150-190 nm diameter were produced. In addition, hollow nanofibers could be obtained subsequent to PEO washing of the membranes. The core-shell nanostructure and existence of chitosan on the shell layer were confirmed by TEM images obtained before and after washing the PEO content with water. The presence of chitosan on the surface of the composite nanofibers was further supported by XPS studies. The chitosan and PEO compositions in the nanofibrous mats were determined by TGA analysis, which were similar to their ratio in the feed solutions. The local compositional homogeneity of the membranes and the efficiency of the washing step to remove PEO were also verified by FTIR. In addition, DSC and XRD were used to characterize the crystalline structure and morphology of the co-electrospun nonwoven mats. The prepared coaxial nanofibers (hollow and solid) have several potential applications due to the presence of chitosan on their outer surfaces.

  12. Structural characterization of Pt-Pd core-shell nanoparticles by Cs-corrected STEM

    Energy Technology Data Exchange (ETDEWEB)

    Esparza, R., E-mail: resparza@fata.unam.mx [Universidad Nacional Autonoma de Mexico, Centro de Fisica Aplicada y Tecnologia Avanzada (Mexico); Garcia-Ruiz, Amado F. [UPIICSA-COFAA, Instituto Politecnico Nacional (Mexico); Velazquez Salazar, J. J. [University of Texas at San Antonio, Department of Physics and Astronomy (United States); Perez, R. [Universidad Nacional Autonoma de Mexico, Centro de Fisica Aplicada y Tecnologia Avanzada (Mexico); Jose-Yacaman, M. [The University of Texas at San Antonio, Department of Physics and Astronomy (United States)

    2013-01-15

    Pt-Pd core-shell nanoparticles were synthesized using a modified polyol method. A thermal method under refluxing, carrying on the reaction up to 285 Degree-Sign C, has been performed to reduce metallic salts using ethylene glycol as reducer and poly(N-vinyl-2-pyrrolidone) as protective reagent of the formed bimetallic nanoparticles. According to other works, this type of structure has been studied and utilized to successfully increase the catalytic properties of monometallic nanoparticles Pt or Pd. Core-shell bimetallic nanoparticles were structurally characterized using aberration-corrected scanning transmission electron microscopy (Cs-STEM) equipped with a high-angle annular dark field detector, energy-dispersive X-ray spectrometry (EDS), and electron energy-loss spectroscopy (EELS). The high-resolution elemental line scan and mappings were carried out using a combination of STEM-EDS and STEM-EELS. The obtained results show the growth of the Pd shell on the Pt core with polyhedral morphology. The average size of the bimetallic nanoparticles was 13.5 nm and the average size of the core was 8.5 nm; consequently, the thickness of the shell was around 2.5 nm. The growth of the Pd shell on the Pt core is layer by layer, suggesting a Frank-van der Merwe growth mechanism.

  13. The anomalous exchange bias effect in core-shell Co/CoO nanoparticles

    Science.gov (United States)

    Feygenson, Mikhail; Yuen, Yiu; Kim, Kisub; Aronson, Meigan

    2008-03-01

    We study the anomalous exchange bias effect in Co/CoO nanoparticles by means of neutron and x-ray scattering and magnetic experiments. The Co nanoparticles were prepared in oleic acid by thermal decomposition of Co2(CO)8 and were subsequently oxidized. Co core- CoO shell nanoparticles with differing core and shell dimensions were obtained. The magnetic measurements indicated that there is an optimal ratio of the core and shell dimensions which maximizes the exchange bias field. Anomalous small angle x-ray scattering experiments using core-shell contrast and energy analysis provide high accuracy measurements of the core and shell, and their respective size distributions. Neutron diffraction measurements find that oxidation introduces a new modulation wave vector for the magnetization, leading to the increasing magnetic decompensation of the core-shell interface. It is our proposal that this interface moment enhances the exchange coupling of the core and shell, and leads to the extraordinarily large exchange bias effect.

  14. Microstructural and optical properties of CdSe/CdS/ZnS core-shell-shell quantum dots.

    Science.gov (United States)

    Lee, Dea Uk; Kim, Dae Hun; Choi, Dong Hyuk; Kim, Sang Wook; Lee, Hong Seok; Yoo, Keon-Ho; Kim, Tae Whan

    2016-01-25

    CdSe/CdS/ZnS core-shell-shell quantum dots (QDs) were synthesized by using a solution process. High-resolution transmission electron microscopy images and energy dispersive spectroscopy profiles confirmed that stoichiometric CdSe/CdS/ZnS core-shell-shell QDs were formed. Ultraviolet-visible absorption and photoluminescence (PL) spectra of CdSe/CdS/ZnS core-shell-shell QDs showed the dominant excitonic transitions from the ground electronic subband to the ground hole subband (1S(e)-1S(3/2)(h)). The PL mechanism is suggested; the carriers generated by the exciting high-energy photons in the shell region are relaxed to the band-edge states of the core region and recombined to emit lower-energy photons. The activation energy of the carriers confined in the CdSe/CdS/ZnS core-shell-shell QDs, as obtained from temperature-dependent PL spectra, was 200 meV. The quantum efficiency of the CdSe/CdS/ZnS core-shell-shell QDs at 300 K was estimated to be approximately 57%.

  15. Magnetically self-assembled SrFe12O19/Fe-Co core/shell particles

    Energy Technology Data Exchange (ETDEWEB)

    Xu, X; Park, J; Hong, YK; Lane, AM

    2015-02-15

    Epitaxial growth to synthesize core/shell-structured materials is limited because large lattice mismatches are common between materials. Magnetically hard/soft, core/shell-structured materials can be potentially used for rare-earth free permanent magnets, but their synthesis presents a challenge. We report a wet chemistry method to synthesize core/shell structured particles consisting of a magnetically hard SrFe12O19 core and a soft Fe-Co shell, with a lattice mismatch of similar to 100%, which cannot be achieved by conventional epitaxial growth or other alternative methods. When decreasing the size of the magnetically soft Fe-Co nanoclusters to below 5 nm, we show that they can be magnetically attracted by the hard SrFe12O19 to form core/shell structured particles. An AC demagnetization experiment demonstrates the formation mechanism of the core/shell particles, and their magnetic hysteresis loop shows potential for use as rare-earth free permanent magnets. Published by Elsevier B.V.

  16. Preparation and electrochemical performances of carbon sphere@ZnO core-shell nanocomposites for supercapacitor applications

    Science.gov (United States)

    Xiao, Xuechun; Han, Bingqian; Chen, Gang; Wang, Lihong; Wang, Yude

    2017-01-01

    Carbon sphere (CS)@ZnO core-shell nanocomposites were successfully prepared through facile low-temperature water-bath method without annealing treatment. The morphology and the microstructure of samples were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. ZnO nanoparticles with several nanometers in size decorated on the surface of the carbon sphere and formed a core-shell structure. Electrochemical performances of the CS@ZnO core-shell nanocomposites electrodes were investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge (GDC). The CS@ZnO core-shell nanocomposite electrodes exhibit much larger specific capacitance and cycling stability is improved significantly compared with pure ZnO electrode. The CS@ZnO core-shell nanocomposite with mole ratio of 1:1 achieves a specific capacitance of 630 F g−1 at the current density of 2 A g−1. Present work might provide a new route for fabricating carbon sphere and transition metal oxides composite materials as electrodes for the application in supercapacitors. PMID:28057915

  17. Enhancing oxidative stability in heated oils using core/shell structures of collagen and α-tocopherol complex.

    Science.gov (United States)

    Gim, Seo Yeong; Hong, Seungmi; Kim, Jisu; Kwon, YongJun; Kim, Mi-Ja; Kim, GeunHyung; Lee, JaeHwan

    2017-11-15

    In this study, collagen mesh structure was prepared by carrying α-tocopherol in the form of core/shell complex. Antioxidant properties of α-tocopherol loaded carriers were tested in moisture added bulk oils at 140°C. From one gram of collagen core/shell complex, 138mg α-tocopherol was released in medium chain triacylglycerol (MCT). α-Tocopherol was substantially protected against heat treatment when α-tocopherol was complexed in collagen core/shell. Oxidative stability in bulk oil was significantly enhanced by added collagen mesh structure or collagen core/shell complex with α-tocopherol compared to that in control bulk oils (pcore/shell with α-tocopherol (p>0.05). Results of DPPH loss in methanol demonstrated that collagen core/shell with α-tocopherol had significantly (pcore/shell complex is a promising way to enhance the stability of α-tocopherol and oxidative stability in oil-rich foods prepared at high temperature. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. One-pot synthesis of stable water soluble Mn:ZnSe/ZnS core/shell quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Hao; Gao Xue; Liu Siyu; Su Xingguang, E-mail: suxg@jlu.edu.cn [College of Chemistry, Jilin University, Department of Analytical Chemistry (China)

    2013-06-15

    In this paper, Mn:ZnSe/ZnS core/shell-doped quantum dots (d-dots) with 3-mercaptopropionic acid as the stabilizer are successfully synthesized through a simple one-pot synthesis procedure in aqueous solution. The average diameter of Mn:ZnSe/ZnS core/shell d-dots is about 2.9 nm, which is lager than that of Mn:ZnSe cores (about 1.9 nm). The optical features and structure of the obtained Mn:ZnSe/ZnS core/shell quantum dots have been characterized by UV-Vis and fluorescence spectroscopy, X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy. The photostability against UV irradiation and chemical stability against H{sub 2}O{sub 2} etching have been studied, and the results showed that the prepared Mn:ZnSe/ZnS core/shell d-dots are more stable than CdTe quantum dots prepared in aqueous solution. Finally, the resulting core/shell quantum dots are used as fluorescent label in human osteoblast-like HepG2 cell imaging.

  19. Preparation and electrochemical performances of carbon sphere@ZnO core-shell nanocomposites for supercapacitor applications

    Science.gov (United States)

    Xiao, Xuechun; Han, Bingqian; Chen, Gang; Wang, Lihong; Wang, Yude

    2017-01-01

    Carbon sphere (CS)@ZnO core-shell nanocomposites were successfully prepared through facile low-temperature water-bath method without annealing treatment. The morphology and the microstructure of samples were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. ZnO nanoparticles with several nanometers in size decorated on the surface of the carbon sphere and formed a core-shell structure. Electrochemical performances of the CS@ZnO core-shell nanocomposites electrodes were investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge (GDC). The CS@ZnO core-shell nanocomposite electrodes exhibit much larger specific capacitance and cycling stability is improved significantly compared with pure ZnO electrode. The CS@ZnO core-shell nanocomposite with mole ratio of 1:1 achieves a specific capacitance of 630 F g‑1 at the current density of 2 A g‑1. Present work might provide a new route for fabricating carbon sphere and transition metal oxides composite materials as electrodes for the application in supercapacitors.

  20. High-efficient production of SiC/SiO2 core-shell nanowires for effective microwave absorption

    KAUST Repository

    Zhong, Bo

    2017-02-21

    In the current report, we have demonstrated that the high-efficient production of SiC/SiO2 core-shell nanowires can be achieved through the introduction of trace of water vapor during the chemical vapor deposition process. The yield of the SiC/SiO2 core-shell nanowires is dramatically improved due to the introduction of water vapor. The SiC/SiO2 core-shell nanowires exhibit an excellent microwave absorption property in the frequency range of 2.0–18.0GHz with a very low weight percentage of 0.50wt.% in the absorbers. A minimum reflection loss value of −32.72dB (>99.99% attenuation) at 13.84GHz has been observed with the absorber thickness of 3.0mm. Moreover, the SiC/SiO2 core-shell nanowires based absorber can reach an effective absorption bandwidth (<−10dB) of 5.32GHz with the absorber thickness of 3.5mm. Furthermore, a possible absorption mechanism is also proposed in detail for such effective attenuation of microwave which can be attributed to the dielectric loss and magnetic loss of SiC/SiO2 core-shell nanowires.

  1. Flexible bio-memristive devices based on chicken egg albumen:Au@SiO2 core-shell nanoparticle nanocomposites.

    Science.gov (United States)

    Bok, Chang Han; Woo, Sung Jun; Wu, Chaoxing; Park, Jae Hyeon; Kim, Tae Whan

    2017-09-20

    Flexible bio-memristive (FBM) devices utilizing chicken egg albumen (CEA):Au@SiO2 core-shell nanoparticle nanocomposites were fabricated on indium-tin-oxide (ITO) coated polyethylene naphthalate (PEN) substrates. Current-voltage (I-V) curves for the Al/CEA:Au@SiO2 core-shell nanoparticle/ITO/PEN devices showed clockwise current hysteresis behaviors due to the existence of the CEA:Au@SiO2 core-shell nanoparticle nanocomposites. The endurance number of the ON/OFF switching for the FBM devices was above 10(2) cycles. An ON/OFF current ratio of 1 × 10(5) was maintained for retention times longer than 1 × 10(4) s. The memory characteristics of the FBM devices after bending were similar to those before bending. The memory margin and the stability of FBM devices were enhanced due to the embedded Au@SiO2 core-shell nanoparticles. The switching mechanisms occurring in the Al/CEA:Au@SiO2 core-shell nanoparticle/ITO-coated PEN devices are described on the basis of the I-V results and the filament mechanisms.

  2. Unlocking the Origin of Superior Performance of a Si-Ge Core-Shell Nanowire Quantum Dot Field Effect Transistor.

    Science.gov (United States)

    Dhungana, Kamal B; Jaishi, Meghnath; Pati, Ranjit

    2016-07-13

    The sustained advancement in semiconducting core-shell nanowire technology has unlocked a tantalizing route for making next generation field effect transistor (FET). Understanding how to control carrier mobility of these nanowire channels by applying a gate field is the key to developing a high performance FET. Herein, we have identified the switching mechanism responsible for the superior performance of a Si-Ge core-shell nanowire quantum dot FET over its homogeneous Si counterpart. A quantum transport approach is used to investigate the gate-field modulated switching behavior in electronic current for ultranarrow Si and Si-Ge core-shell nanowire quantum dot FETs. Our calculations reveal that for the ON state, the gate-field induced transverse localization of the wave function restricts the carrier transport to the outer (shell) layer with the pz orbitals providing the pathway for tunneling of electrons in the channels. The higher ON state current in the Si-Ge core-shell nanowire FET is attributed to the pz orbitals that are distributed over the entire channel; in the case of Si nanowire, the participating pz orbital is restricted to a few Si atoms in the channel resulting in a smaller tunneling current. Within the gate bias range considered here, the transconductance is found to be substantially higher in the case of a Si-Ge core-shell nanowire FET than in a Si nanowire FET, which suggests a much higher mobility in the Si-Ge nanowire device.

  3. Preparation and characterization of folate-chitosan-gemcitabine core-shell nanoparticles for potential tumor-targeted drug delivery.

    Science.gov (United States)

    Xu, Shi; Xu, Qian; Zhou, Jiahua; Wang, Junying; Zhang, Niping; Zhang, Ling

    2013-01-01

    For the purpose of achieving targeted chemotherapy of pancreatic cancer, we prepared core-shell nanoparticles by coaxial electrospray technology, with folate-chitosan as the polymeric coating material and gemcitabine as the encapsulated drug. The effects of various solution properties and processing parameters on nanoparticles formation were investigated. By optimizing the electrospray parameters, the diameter of the core-shell nanoparticles was in the range of 200-300 nm with drug loading and encapsulation efficiency of 3.91 +/- 0.12% and 85.37 +/- 4.9%. The drug release kinetics revealed a controlled initial burst release followed by a sustained release over a period of 72 h at pH 7.4 and pH 5.0, and at pH 5.0 the drug released more quickly. Moreover, the cellular uptake experiment confirmed that the folate conjugated core-shell nanoparticles had high pancreatic cancer (BXPC3) cells uptake efficiency. And the cell cytotoxicity test displayed that they had remarkable cytotoxicity towards BXPC3 cells. This study indicates that coaxial electrospray is a facile technique in producing core-shell nanoparticles encapsulating hydrophilic small molecule drugs, and clearly infers that the folate conjugated core-shell nanoparticles is very much effective to use as a pancreatic tumor-targeted delivery carrier for anticancer drugs.

  4. Synthesis of Multicolor Core/Shell NaLuF₄:Yb(3+)/Ln(3+)@CaF₂ Upconversion Nanocrystals.

    Science.gov (United States)

    Li, Hui; Hao, Shuwei; Yang, Chunhui; Chen, Guanying

    2017-02-07

    The ability to synthesize high-quality hierarchical core/shell nanocrystals from an efficient host lattice is important to realize efficacious photon upconversion for applications ranging from bioimaging to solar cells. Here, we describe a strategy to fabricate multicolor core @ shell α-NaLuF₄:Yb(3+)/Ln(3+)@CaF₂ (Ln = Er, Ho, Tm) upconversion nanocrystals (UCNCs) based on the newly established host lattice of sodium lutetium fluoride (NaLuF₄). We exploited the liquid-solid-solution method to synthesize the NaLuF₄ core of pure cubic phase and the thermal decomposition approach to expitaxially grow the calcium fluoride (CaF₂) shell onto the core UCNCs, yielding cubic core/shell nanocrystals with a size of 15.6 ± 1.2 nm (the core ~9 ± 0.9 nm, the shell ~3.3 ± 0.3 nm). We showed that those core/shell UCNCs could emit activator-defined multicolor emissions up to about 772 times more efficient than the core nanocrystals due to effective suppression of surface-related quenching effects. Our results provide a new paradigm on heterogeneous core/shell structure for enhanced multicolor upconversion photoluminescence from colloidal nanocrystals.

  5. Microstructure-dependent mechanical properties of electrospun core-shell scaffolds at multi-scale levels.

    Science.gov (United States)

    Horner, Christopher B; Ico, Gerardo; Johnson, Jed; Zhao, Yi; Nam, Jin

    2016-06-01

    Mechanical factors among many physiochemical properties of scaffolds for stem cell-based tissue engineering significantly affect tissue morphogenesis by controlling stem cell behaviors including proliferation and phenotype-specific differentiation. Core-shell electrospinning provides a unique opportunity to control mechanical properties of scaffolds independent of surface chemistry, rendering a greater freedom to tailor design for specific applications. In this study, we synthesized electrospun core-shell scaffolds having different core composition and/or core-to-shell dimensional ratios. Two independent biocompatible polymer systems, polyetherketoneketone (PEKK) and gelatin as the core materials while maintaining the shell polymer with polycaprolactone (PCL), were utilized. The mechanics of such scaffolds was analyzed at the microscale and macroscales to determine the potential implications it may hold for cell-material and tissue-material interactions. The mechanical properties of individual core-shell fibers were controlled by core-shell composition and structure. The individual fiber modulus correlated with the increase in percent core size ranging from 0.55±0.10GPa to 1.74±0.22GPa and 0.48±0.12GPa to 1.53±0.12GPa for the PEKK-PCL and gelatin-PCL fibers, respectively. More importantly, it was demonstrated that mechanical properties of the scaffolds at the macroscale were dominantly determined by porosity under compression. The increase of scaffold porosity from 70.2%±1.0% to 93.2%±0.5% by increasing the core size in the PEKK-PCL scaffold resulted in the decrease of the compressive elastic modulus from 227.67±20.39kPa to 14.55±1.43kPa while a greater changes in the porosity of gelatin-PCL scaffold from 54.5%±4.2% to 89.6%±0.4% resulted in the compressive elastic modulus change from 484.01±30.18kPa to 17.57±1.40kPa. On the other hand, the biphasic behaviors under tensile mechanical loading result in a range from a minimum of 5.42±1.05MPa to a maximum

  6. CSR-1 Slices a Balance.

    Science.gov (United States)

    Yu, Ruby; Moazed, Danesh

    2016-04-07

    CSR-1 is a germline-expressed C. elegans Argonaute protein essential for viability. In this issue of Cell, Gerson-Gurwitz et al. now demonstrate a role for CSR-1 and its slicer activity in downregulating the levels of maternally deposited mRNAs to fine-tune the expression of proteins with critical roles in embryonic cell divisions.

  7. CSR Pulsed Switching Power Supplies

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In 2001, CSR power supply system made a great progress. Three prototypes were designed for CSR quadruple and correct magnet. Three different companies provided the three prototypes, but the same circuit-chopper were employed. The simplified diagram is showed in Fig.1. All pulsed switching power supply prototypes were tested successfully before the end of 2001.

  8. Mercaptoethanol capped CdSe quantum dots and CdSe/ZnS core/shell: synthesis, characterization and cytotoxicity evaluation.

    Science.gov (United States)

    Painuly, Diksha; Bhatt, Anugya; Krishnan, V Kalliyana

    2013-02-01

    CdSe Quantum dots (Q-dots) and CdSe/ZnS core/shell have been synthesized by wet chemical route using mercaptoethanol (ME) as cappant. The synthesized Q-dots and core/shell were characterized using X-ray diffraction (XRD), Transmission electron microscopy (TEM), Energy dispersive X-ray analysis (EDS), Dynamic Light Scattering (DLS), Optical absorption and luminescence spectroscopy. The core/shell formation was confirmed by both XRD and TEM analysis. The luminescence was shown to be considerably enhanced in the core/shell sample. Effect of dialysis process on the optical properties of the Q-dots and core/shell has also been discussed. Cytotoxicity studies have been carried out for Q-dots and core/shell. CdSe/ZnS core/shell was found to be non-cytotoxic as compared to CdSe Q-dots up to a certain concentration range. Polyethylene glycol (PEG) coating enhances the non-cytotoxic nature of CdSe/ZnS core/shell when compared with bare core/shell.

  9. Core-shell biopolymer nanoparticle delivery systems: synthesis and characterization of curcumin fortified zein-pectin nanoparticles.

    Science.gov (United States)

    Hu, Kun; Huang, Xiaoxia; Gao, Yongqing; Huang, Xulin; Xiao, Hang; McClements, David Julian

    2015-09-01

    Biopolymer core-shell nanoparticles were fabricated using a hydrophobic protein (zein) as the core and a hydrophilic polysaccharide (pectin) as the shell. Particles were prepared by coating cationic zein nanoparticles with anionic pectin molecules using electrostatic deposition (pH 4). The core-shell nanoparticles were fortified with curcumin (a hydrophobic bioactive molecule) at a high loading efficiency (>86%). The resulting nanoparticles were spherical, relatively small (diameter ≈ 250 nm), and had a narrow size distribution (polydispersity index ≈ 0.24). The encapsulated curcumin was in an amorphous (rather than crystalline form) as detected by differential scanning calorimetry (DSC). Fourier transform infrared (FTIR) and Raman spectra indicated that the encapsulated curcumin interacted with zein mainly through hydrophobic interactions. The nanoparticles were converted into a powdered form that had good water-dispersibility. These core-shell biopolymer nanoparticles could be useful for incorporating curcumin into functional foods and beverages, as well as dietary supplements and pharmaceutical products.

  10. Synthesis and properties of Ag/ZnO core/shell nanostructures prepared by excimer laser ablation in liquid

    Directory of Open Access Journals (Sweden)

    Yan Zhao

    2015-08-01

    Full Text Available Ag/ZnO core/shell nanostructure was synthesised by a 248-nm KrF excimer pulsed laser ablation in a liquid solution for the first time. It was found that the surface plasma resonance absorption of the Ag/ZnO core/shell nanostructures can be tuned by the thickness of the ZnO shell, which is in agreement with the finite difference in the time domain simulation. Furthermore, the ultraviolet emission spectrum of the Ag/ZnO core/shell nanostructures was stronger and blue-shifted compared with that of pure ZnO nanoparticles. This interesting photoluminescent phenomenon is analysed in detail and a possible explanation is proposed.

  11. An electrostatic nanogenerator based on ZnO/ZnS core/shell electrets with stabilized quasi-permanent charge

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Chao; Cai, Liang; Feng, Yajuan; Chen, Lin; Yan, Wensheng, E-mail: ywsh2000@ustc.edu.cn, E-mail: zhsun@ustc.edu.cn; Liu, Qinghua; Yao, Tao; Hu, Fengchun; Pan, Zhiyun; Sun, Zhihu, E-mail: ywsh2000@ustc.edu.cn, E-mail: zhsun@ustc.edu.cn; Wei, Shiqiang [National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei, Anhui 230029 (China)

    2014-06-16

    ZnO-based nanogenerators with excellent performance and convenient functionalization are particularly desirable for self-powered technology, which is however difficult to achieve simultaneously in traditional piezoelectric ZnO nanogenerators. Here, we report a design of electrostatic ZnO nanogenerator by virtue of a type-II ZnO/ZnS core/shell nanostructure electrets, which can turn acoustic waves into electric power with an energy conversion efficiency of 2.2%. The ZnO/ZnS core/shell electrets are charged by ultraviolet irradiation with a long-term stability of the electrostatic charges under ambient condition. The electronic and atomic structure evolution in the charged ZnO/ZnS core/shell electrets are also discussed by detailed experimental and theoretical investigations. This design opens up an alternative path for fabricating robust ZnO-based nanogenerator for future nanotechnology application.

  12. Fabrication of In2O3@In2S3 core-shell nanocubes for enhanced photoelectrochemical performance

    Science.gov (United States)

    Li, Haohua; Chen, Cong; Huang, Xinyou; Leng, Yang; Hou, Mengnan; Xiao, Xiaogu; Bao, Jie; You, Jiali; Zhang, Wenwen; Wang, Yukun; Song, Juan; Wang, Yaping; Liu, Qinqin; Hope, Gregory A.

    2014-02-01

    Herein, we report the facile synthesis of In2O3@In2S3 core-shell nanocubes and their improved photoelectrochemical property. In2O3@In2S3 core-shell nanocubes are grown on a F-doped SnO2 (FTO) glass substrate by a two-step process, which involves the electrodeposition of In2O3 nanocubes and a subsequent ion-exchange treatment. The improved light-harvesting ability and the suitable band alignment of the In2O3@In2S3 core-shell nanocubes generate a remarkable photocurrent density of 6.19 mA cm-2 (at 0 V vs. Ag/AgCl), which is substantially higher than the pristine In2O3 nanocubes. These results provide a new insight into the design of a high-performance photoanode for photoelectrochemical water splitting.

  13. Microwave-assisted synthesis of water-dispersed CdTe/CdSe core/shell type II quantum dots.

    Science.gov (United States)

    Sai, Li-Man; Kong, Xiang Yang

    2011-05-27

    A facile synthesis of mercaptanacid-capped CdTe/CdSe (core/shell) type II quantum dots in aqueous solution by means of a microwave-assisted approach is reported. The results of X-ray diffraction and high-resolution transmission electron microscopy revealed that the as-prepared CdTe/CdSe quantum dots had a core/shell structure with high crystallinity. The core/shell quantum dots exhibit tunable fluorescence emissions by controlling the thickness of the CdSe shell. The photoluminescent properties were dramatically improved through UV-illuminated treatment, and the time-resolved fluorescence spectra showed that there is a gradual increase of decay lifetime with the thickness of CdSe shell.

  14. Fluorescence relaxation dynamics of CdSe and CdSe/CdS core/shell quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Gurvir; Kaur, Harmandeep [Centre of Advanced Study in Physics, Department of Physics, Panjab University, Chandigarh-160014 (India); Tripathi, S. K., E-mail: surya@pu.ac.in [Centre of Advanced Study in Physics, Panjab University, Chandigarh- 160014 (India)

    2014-04-24

    Time-resolved fluorescence spectra for colloidal CdSe and CdSe/CdS core/shell quantum dots have been investigated to know their electron relaxation dynamics at the maximum steady state fluorescence intensity. CdSe core and CdSe/CdS type I core-shell materials with different shell (CdS) thicknesses have been synthesized using mercaptoacetic acid as a capping agent. Steady state absorption and emission studies confirmed successful synthesis of CdSe and CdSe/CdS core-shell quantum dots. The fluorescence shows a tri-exponential decay with lifetimes 57.39, 7.82 and 0.96 ns for CdSe quantum dots. The lifetime of each recombination decreased with growth of CdS shell over the CdSe core, with maximum contribution to fluorescence by the fastest transition.

  15. Microwave-assisted synthesis of water-dispersed CdTe/CdSe core/shell type II quantum dots

    Directory of Open Access Journals (Sweden)

    Sai Li-Man

    2011-01-01

    Full Text Available Abstract A facile synthesis of mercaptanacid-capped CdTe/CdSe (core/shell type II quantum dots in aqueous solution by means of a microwave-assisted approach is reported. The results of X-ray diffraction and high-resolution transmission electron microscopy revealed that the as-prepared CdTe/CdSe quantum dots had a core/shell structure with high crystallinity. The core/shell quantum dots exhibit tunable fluorescence emissions by controlling the thickness of the CdSe shell. The photoluminescent properties were dramatically improved through UV-illuminated treatment, and the time-resolved fluorescence spectra showed that there is a gradual increase of decay lifetime with the thickness of CdSe shell.

  16. Core-shell Au/Ag nanoparticles embedded in silicate sol-gel network for sensor application towards hydrogen peroxide

    Indian Academy of Sciences (India)

    Shanmugam Manivannan; Ramasamy Ramaraj

    2009-09-01

    The electrocatalytic activity of core-shell Au100-Ag ( = 15, 27, 46, and 60) bimetallic nanoparticles embedded in methyl functionalized silicate MTMOS network towards the reduction of hydrogen peroxide was investigated by using cyclic voltammetry and chronoamperometric techniques. Core-shell Au/Ag bimetallic nanoparticles were characterized by absorption spectra and HRTEM. The MTMOS silicate sol-gel embedded Au73Ag27 core-shell nanoparticles modified electrode showed better synergistic electrocatalytic effect towards the reduction of hydrogen peroxide when compared to monometal MTMOS-Aunps and MTMOS-Agnps modified electrodes. These modified electrodes were studied without immobilizing any enzyme in the MTMOS sol-gel matrix. The present study highlights the influence of molar composition of Ag nanoparticles in the Au/Ag bimetallic composition towards the electrocatalytic reduction and sensing of hydrogen peroxide in comparison to monometal Au and Ag nanoparticles.

  17. Optical properties of plasmonic light-emitting diodes based on flip-chip III-nitride core-shell nanowires.

    Science.gov (United States)

    Nami, Mohsen; Feezell, Daniel F

    2014-12-01

    In this work, we utilize the finite difference time domain (FDTD) method to investigate the Purcell factor, light extraction efficiency (EXE), and cavity quality parameter (Q), and to predict the modulation response of Ag-clad flip-chip GaN/InGaN core-shell nanowire light-emitting diodes (LEDs) with the potential for electrical injection. We consider the need for a pn-junction, the effects of the substrate, and the limitations of nanoscale fabrication techniques in the evaluation. The investigated core-shell nanowire consists of an n-GaN core, surrounded by nonpolar m-plane quantum wells, p-GaN, and silver cladding layers. The core-shell nanowire geometry exhibits a Purcell factor of 57, resulting in a predicted limit of 30 GHz for the 3dB modulation bandwidth.

  18. Core-shell hematite nanorods: a simple method to improve the charge transfer in the photoanode for photoelectrochemical water splitting.

    Science.gov (United States)

    Gurudayal; Chee, Png Mei; Boix, Pablo P; Ge, Hu; Yanan, Fang; Barber, James; Wong, Lydia Helena

    2015-04-01

    We report a simple method to produce a stable and repeatable photoanode for water splitting with a core-shell hematite (α-Fe2O3) nanorods system by combining spray pyrolysis and hydrothermal synthesis. Impedance spectroscopy revealed passivation of the surface states by the shell layer, which results in an increase of the charge injection through the hematite conduction band. In pristine hematite more holes are accumulated on the surface and the charge transfer to the electrolyte occurs through surface states, whereas in the core-shell hematite photoanode the majority of hole transfer process occurs through the valence band. As a result the photoactivity of the core-shell nanorods, 1.2 mA cm(-2), at 1.23 V vs RHE, is twice that of pristine hematite nanorods. The alteration of the interface energetics is supported by TEM, showing that the crystallinity of the surface has been improved by the deposition of the shell.

  19. Synthesis of N-halamine-functionalized silica-polymer core-shell nanoparticles and their enhanced antibacterial activity

    Science.gov (United States)

    Dong, Alideertu; Huang, Jinfeng; Lan, Shi; Wang, Tao; Xiao, Linghan; Wang, Weiwei; Zhao, Tianyi; Zheng, Xin; Liu, Fengqi; Gao, Ge; Chen, Yuxin

    2011-07-01

    N-halamine-functionalized silica-polymer core-shell nanoparticles with enhanced antibacterial activity were synthesized through the encapsulation of silica nanoparticles as support with polymeric N-halamine. The as-synthesized nanoparticles were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive x-ray spectrometry (EDX), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR). These N-halamine-functionalized silica-polymer core-shell nanoparticles displayed powerful antibacterial performance against both Gram-positive bacteria and Gram-negative bacteria, and their antibacterial activities have been greatly improved compared with their bulk counterparts. Therefore, these N-halamine-functionalized silica-polymer core-shell nanoparticles have the potential for various significant applications such as in medical devices, healthcare products, water purification systems, hospitals, dental office equipment, food packaging, food storage, household sanitation, etc.

  20. Highly active Pt3Pb and core-shell Pt3Pb-Pt electrocatalysts for formic acid oxidation.

    Science.gov (United States)

    Kang, Yijin; Qi, Liang; Li, Meng; Diaz, Rosa E; Su, Dong; Adzic, Radoslav R; Stach, Eric; Li, Ju; Murray, Christopher B

    2012-03-27

    Formic acid is a promising chemical fuel for fuel cell applications. However, due to the dominance of the indirect reaction pathway and strong poisoning effects, the development of direct formic acid fuel cells has been impeded by the low activity of existing electrocatalysts at desirable operating voltage. We report the first synthesis of Pt(3)Pb nanocrystals through solution phase synthesis and show they are highly efficient formic acid oxidation electrocatalysts. The activity can be further improved by manipulating the Pt(3)Pb-Pt core-shell structure. Combined experimental and theoretical studies suggest that the high activity from Pt(3)Pb and the Pt-Pb core-shell nanocrystals results from the elimination of CO poisoning and decreased barriers for the dehydrogenation steps. Therefore, the Pt(3)Pb and Pt-Pb core-shell nanocrystals can improve the performance of direct formic acid fuel cells at desired operating voltage to enable their practical application. © 2012 American Chemical Society

  1. Polybutylacrylate/poly(methyl methacrylate) Core-Shell Elastic Particles as Epoxy Resin Toughener:Part Ⅰ Design and Preparation

    Institute of Scientific and Technical Information of China (English)

    Jianli WANG; Myonghoon LEE; Xiaomei YU; Jianbin JI; Kejian YAO

    2004-01-01

    Polybutylacrylate (PBA)/poly(methyl methacrylate) (PM MA) core-shell elastic particles (CSEP), whose rubbery core diameterranged from 0.08 μm to 1.38 μm, were synthesized by using conventional emulsion polymerization, multi-step emulsion polymerization, and soapless polymerization. Allyl methacylate (ALMA) and ethylene glycol dimethacrylate (EGDMA) were selected as crosslinking reagents for core polymerization. Methacrylic acid (MAA) was used as functional co-monomer with methyl methacrylate as shell component. The content of vinyl groups in PBA rubbery core increased with the amount of crosslinking reagents. The core-shell ratio affected great on the morphology of the complex particles. Furthermore, the amounts of carboxyl on the surface of core-shell particles, copolymerized with acrylic acid, were determined by potentiometric titration. Results showed that methylacrylic acid was distributed mostly on the surface of particles.

  2. DNA intercalation studies and antimicrobial activity of Ag@ZrO2 core-shell nanoparticles in vitro.

    Science.gov (United States)

    Dhanalekshmi, K I; Meena, K S

    2016-02-01

    Ag@ZrO2 core-shell nanoparticles were prepared by one pot simultaneous reduction of AgNO3 and hydrolysis of zirconium (IV) isopropoxide. The formation of core-shell nanoparticles was confirmed by absorption, XRD, and HR-TEM techniques. The antibacterial activity of Ag@ZrO2 core-shell nanoparticles against Escherichia coli and Staphylococcus aureus and the antifungal properties against Candida albicans, Candida glabrata, Aspergillus niger and Aspergillus flavus were examined by the agar diffusion method. DNA intercalation studies were carried out in CT-DNA. As a result ZrO2 supported on the surface of AgNPs not only prevented aggregation, but also proved to have enhanced antimicrobial activity and DNA intercalation than the Ag nanoparticles.

  3. Drug release profile in core-shell nanofibrous structures: a study on Peppas equation and artificial neural network modeling.

    Science.gov (United States)

    Maleki, Mahboubeh; Amani-Tehran, Mohammad; Latifi, Masoud; Mathur, Sanjay

    2014-01-01

    Release profile of drug constituent encapsulated in electrospun core-shell nanofibrous mats was modeled by Peppas equation and artificial neural network. Core-shell fibers were fabricated by co-axial electrospinning process using tetracycline hydrochloride (TCH) as the core and poly(l-lactide-co-glycolide) (PLGA) or polycaprolactone (PCL) as the shell materials. The density and hydrophilicity of the shell polymers, feed rates and concentrations of core and shell phases, the contribution of TCH in core material and electrical field were the parameters fed to the perceptron network to predict Peppas constants in order to derive release pattern. This study demonstrated the viability of the prediction tool in determining drug release profile of electrospun core-shell nanofibrous scaffolds.

  4. Influence of particle size and shell thickness of core-shell packing materials on optimum experimental conditions in preparative chromatography.

    Science.gov (United States)

    Horváth, Krisztián; Felinger, Attila

    2015-08-14

    The applicability of core-shell phases in preparative separations was studied by a modeling approach. The preparative separations were optimized for two compounds having bi-Langmuir isotherms. The differential mass balance equation of chromatography was solved by the Rouchon algorithm. The results show that as the size of the core increases, larger particles can be used in separations, resulting in higher applicable flow rates, shorter cycle times. Due to the decreasing volume of porous layer, the loadability of the column dropped significantly. As a result, the productivity and economy of the separation decreases. It is shown that if it is possible to optimize the size of stationary phase particles for the given separation task, the use of core-shell phases are not beneficial. The use of core-shell phases proved to be advantageous when the goal is to build preparative column for general purposes (e.g. for purification of different products) in small scale separations.

  5. Synthesis of N-halamine-functionalized silica-polymer core-shell nanoparticles and their enhanced antibacterial activity

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Alideertu; Wang Tao; Xiao Linghan; Wang Weiwei; Zhao Tianyi; Zheng Xin; Liu Fengqi; Gao Ge [College of Chemistry, Jilin University and MacDiarmid Laboratory, Changchun 130021 (China); Huang Jinfeng; Chen Yuxin [Key Laboratory for Molecular Enzymology and Engineering of the Ministry of Education, Jilin University, Changchun 130012 (China); Lan Shi, E-mail: gaoge@jlu.edu.cn [College of Chemistry and Chemical Engineering, Inner Mongolia University for the Nationalities, Tongliao 028000 (China)

    2011-07-22

    N-halamine-functionalized silica-polymer core-shell nanoparticles with enhanced antibacterial activity were synthesized through the encapsulation of silica nanoparticles as support with polymeric N-halamine. The as-synthesized nanoparticles were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive x-ray spectrometry (EDX), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR). These N-halamine-functionalized silica-polymer core-shell nanoparticles displayed powerful antibacterial performance against both Gram-positive bacteria and Gram-negative bacteria, and their antibacterial activities have been greatly improved compared with their bulk counterparts. Therefore, these N-halamine-functionalized silica-polymer core-shell nanoparticles have the potential for various significant applications such as in medical devices, healthcare products, water purification systems, hospitals, dental office equipment, food packaging, food storage, household sanitation, etc.

  6. Controllable synthesis of ZnxCd1-xS@ZnO core-shell nanorods with enhanced photocatalytic activity.

    Science.gov (United States)

    Xie, Shilei; Lu, Xihong; Zhai, Teng; Gan, Jiayong; Li, Wei; Xu, Ming; Yu, Minghao; Zhang, Yuan-Ming; Tong, Yexiang

    2012-07-17

    We report the synthesis of Zn(x)Cd(1-x)S@ZnO nanorod arrays via a facile two-step process and the implementation of these core-shell nanorods as an environmental friendly and recyclable photocatalyst for methyl orange degradation. The band gap of Zn(x)Cd(1-x)S@ZnO core-shell nanorods can be readily tunable by adjusting the ratio of Zn/Cd during the synthesis. These Zn(x)Cd(1-x)S@ZnO core-shell nanorods exhibit a high photocatalytic activity and good stability in the degradation of the methyl orange. Moreover, these films grown on FTO substrates make the collection and recycle of the photocatalyst easier. These findings may open new opportunities for the design of effective, stable, and easy-recyclable photocatalytic materials.

  7. Application of magnetic and core-shell nanoparticles to determine enrofloxacin and its metabolite using laser induced fluorescence microscope.

    Science.gov (United States)

    Kim, Suji; Ko, Junga; Lim, H B

    2013-04-10

    A unique analytical method using nanoparticles and laser-induced fluorescence microscopy (LIFM) was developed to determine enrofloxacin in this work. For sample pretreatment, two different kinds of particles, i.e., synthesized dye-doped core-shell silica nanoparticles and magnetic micro-particles (MPs), were used for fluorescent tagging and concentrating the enrofloxacin, respectively. The antibody of enrofloxacin was immobilized on the synthesized FITC-doped core-shell nanoparticles, and the enrofloxacin target was extracted by the MPs. At this moment, the average number of antibodies on each core-shell silica nanoparticle was ~0.9, which was determined by the fluorescence ratiometric method. The described method was demonstrated for a meat sample to determine enrofloxacin using LIFM, and the result was compared with enzyme-linked immunosorbent assay (ELISA). The developed technique allowed the simplified analytical procedure, improved the detection limit about 54-fold compared to ELISA.

  8. Physisorption-induced electron scattering on the surface of carbon-metal core-shell nanowire arrays for hydrogen sensing

    Science.gov (United States)

    Yick, S.; Yajadda, M. M. A.; Bendavid, A.; Han, Z. J.; Ostrikov, K.

    2013-06-01

    Palladium is sputtered on multi-walled carbon nanotube forests to form carbon-metal core-shell nanowire arrays. These hybrid nanostructures exhibited resistive responses when exposed to hydrogen with an excellent baseline recovery at room temperature. The magnitude of the response is shown to be tuneable by an applied voltage. Unlike the charge-transfer mechanism commonly attributed to Pd nanoparticle-decorated carbon nanotubes, this demonstrates that the hydrogen response mechanism of the multi-walled carbon nanotube-Pd core-shell nanostructure is due to the increase in electron scattering induced by physisorption of hydrogen. These hybrid core-shell nanostructures are promising for gas detection in hydrogen storage applications.

  9. Quantifying the Impact of Nanoparticle Coatings and Non-uniformities on XPS Analysis: Gold/silver Core-shell Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yung-Chen Andrew; Engelhard, Mark H.; Baer, Donald R.; Castner, David G.

    2016-03-07

    Abstract or short description: Spectral modeling of photoelectrons can serve as a valuable tool when combined with X-ray photoelectron spectroscopy (XPS) analysis. Herein, a new version of the NIST Simulation of Electron Spectra for Surface Analysis (SESSA 2.0) software, capable of directly simulating spherical multilayer NPs, was applied to model citrate stabilized Au/Ag-core/shell nanoparticles (NPs). The NPs were characterized using XPS and scanning transmission electron microscopy (STEM) to determine the composition and morphology of the NPs. The Au/Ag-core/shell NPs were observed to be polydispersed in size, non-circular, and contain off-centered Au-cores. Using the average NP dimensions determined from STEM analysis, SESSA spectral modeling indicated that washed Au/Ag-core shell NPs were stabilized with a 0.8 nm l

  10. Synthesis of Ni-SiO2/silicalite-1 core-shell micromembrane reactors and their reaction/diffusion performance

    KAUST Repository

    Khan, Easir A.

    2010-12-15

    Core-shell micromembrane reactors are a novel class of materials where a catalyst and a shape-selective membrane are synergistically housed in a single particle. In this work, we report the synthesis of micrometer -sized core-shell particles containing a catalyst core and a thin permselective zeolite shell and their application as a micromembrane reactor for the selective hydrogenation of the 1-hexene and 3,3-dimethyl-1-butene isomers. The bare catalyst, which is made from porous silica loaded with catalytically active nickel, showed no reactant selectivity between hexene isomers, but the core-shell particles showed high selectivities up to 300 for a 1-hexene conversion of 90%. © 2010 American Chemical Society.

  11. Constructing Interfacial Energy Transfer for Photon Up- and Down-Conversion from Lanthanides in a Core-Shell Nanostructure.

    Science.gov (United States)

    Zhou, Bo; Tao, Lili; Chai, Yang; Lau, Shu Ping; Zhang, Qinyuan; Tsang, Yuen Hong

    2016-09-26

    We report a new mechanistic strategy for controlling and modifying the photon emission of lanthanides in a core-shell nanostructure by using interfacial energy transfer. By taking advantage of this mechanism with Gd(3+) as the energy donor, we have realized efficient up- and down-converted emissions from a series of lanthanide emitters (Eu(3+) , Tb(3+) , Dy(3+) , and Sm(3+) ) in these core-shell nanoparticles, which do not need a migratory host sublattice. Moreover, we have demonstrated that the Gd(3+) -mediated interfacial energy transfer, in contrast to energy migration, is the leading process contributing to the photon emission of lanthanide dopants for the NaGdF4 @NaGdF4 core-shell system. Our finding suggests a new direction for research into better control of energy transfer at the nanometer length scale, which would help to stimulate new concepts for designing and improving photon emission of the lanthanide-based luminescent materials.

  12. CSR as Corporate Political Activity

    DEFF Research Database (Denmark)

    Morsing, Mette; Roepstorff, Anne

    2015-01-01

    In this article, we develop a conceptual framework to understand how a company’s CSR identity becomes defined as a political activity destabilizing the strong identity–image relations. We draw on theories of political CSR and organizational identity–image relations to study how CSR emerges...... as a corporate political activity in a context where the corporate CSR work is first appreciated and later critiqued by the public in the wake of socio-political events. We analyse the micro-organizational processes in the context of macro-political level changes, and we refer to this as the ‘identity......–image dynamics of political CSR’. Concretely, we describe in two vignettes how IKEA’s declared ‘apolitical and neutral’ CSR identity becomes entangled with national and international socio-political events that critically challenge the corporate engagement prior national understandings of citizenship rights...

  13. Integrated reporting with CSR practices

    DEFF Research Database (Denmark)

    Lueg, Klarissa; Lueg, Rainer; Andersen, Karina;

    2016-01-01

    Purpose: This study aims to illustrate how standards and guidelines for corporate social responsibility (CSR) can help a company in its integrated reporting (IR). We investigate the motivations of diverse stakeholders (including shareholders) in fostering the adoption of standards and guidelines...... for CSR after IR became mandatory in Denmark. Methodology: We conduct a case study at the Danish carpet manufacturer EGE. We interpret the case from the perspective of pragmatic constructivism, which focuses on the integration of four dimensions: facts, possibilities, values, and communication. Findings......: We find that the family-owned EGE follows a strategy of “enlightened shareholder value”, in which CSR is an essential value driver. This strategy fostered IR with guidelines and standards for CSR. The CSR practices appeared to be helpful for integrating measureable plans to the strategy...

  14. Hollow Au@Pd and Au@Pt core-shell nanoparticles as electrocatalysts for ethanol oxidation reactions

    KAUST Repository

    Song, Hyon Min

    2012-09-27

    Hybrid alloys among gold, palladium and platinum become a new category of catalysts primarily due to their enhanced catalytic effects. Enhancement means not only their effectiveness, but also their uniqueness as catalysts for the reactions that individual metals may not catalyze. Here, preparation of hollow Au@Pd and Au@Pt core-shell nanoparticles (NPs) and their use as electrocatalysts are reported. Galvanic displacement with Ag NPs is used to obtain hollow NPs, and higher reduction potential of Au compared to Ag, Pd, and Pt helps to produce hollow Au cores first, followed by Pd or Pt shell growth. Continuous and highly crystalline shell growth was observed in Au@Pd core-shell NPs, but the sporadic and porous-like structure was observed in Au@Pt core-shell NPs. Along with hollow core-shell NPs, hollow porous Pt and hollow Au NPs are also prepared from Ag seed NPs. Twin boundaries which are typically observed in large size (>20 nm) Au NPs were not observed in hollow Au NPs. This absence is believed to be due to the role of the hollows, which significantly reduce the strain energy of edges where the two lattice planes meet. In ethanol oxidation reactions in alkaline medium, hollow Au@Pd core-shell NPs show highest current density in forward scan. Hollow Au@Pt core-shell NPs maintain better catalytic activities than metallic Pt, which is thought to be due to the better crystallinity of Pt shells as well as the alloy effect of Au cores. © 2012 The Royal Society of Chemistry.

  15. Process-Dependent Properties in Colloidally Synthesized “Giant” Core/Shell Nanocrystal Quantum Dots

    Energy Technology Data Exchange (ETDEWEB)

    Hollingsworth, Jennifer A. [Los Alamos National Laboratory; Ghosh, Yagnaseni [Los Alamos National Laboratory; Dennis, Allison M. [Los Alamos National Laboratory; Mangum, Benjamin D. [Los Alamos National Laboratory; Park, Young-Shin [Los Alamos National Laboratory; Kundu, Janardan [Los Alamos National Laboratory; Htoon, Han [Los Alamos National Laboratory

    2012-06-07

    Due to their characteristic bright and stable photoluminescence, semiconductor nanocrystal quantum dots (NQDs) have attracted much interest as efficient light emitters for applications from single-particle tracking to solid-state lighting. Despite their numerous enabling traits, however, NQD optical properties are frustratingly sensitive to their chemical environment, exhibit fluorescence intermittency ('blinking'), and are susceptible to Auger recombination, an efficient nonradiative decay process. Previously, we showed for the first time that colloidal CdSe/CdS core/shell nanocrystal quantum dots (NQDs) comprising ultrathick shells (number of shell monolayers, n, > 10) grown by protracted successive ionic layer adsorption and reaction (SILAR) leads to remarkable photostability and significantly suppressed blinking behavior as a function of increasing shell thickness. We have also shown that these so-called 'giant' NQDs (g-NQDs) afford nearly complete suppression of non-radiative Auger recombination, revealed in our studies as long biexciton lifetimes and efficient multiexciton emission. The unique behavior of this core/shell system prompted us to assess correlations between specific physicochemical properties - beyond shell thickness - and functionality. Here, we demonstrate the ability of particle shape/faceting, crystalline phase, and core size to determine ensemble and single-particle optical properties (quantum yield/brightness, blinking, radiative lifetimes). Significantly, we show how reaction process parameters (surface-stabilizing ligands, ligand:NQD ratio, choice of 'inert' solvent, and modifications to the SILAR method itself) can be tuned to modify these function-dictating NQD physical properties, ultimately leading to an optimized synthetic approach that results in the complete suppression of blinking. We find that the resulting 'guiding principles' can be applied to other NQD compositions, allowing us to

  16. Metal oxide core shell nanostructures as building blocks for efficient light emission (SISGR)

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Jane P [Univ. of California, Los Angeles, CA (United States); Dorman, James [Univ. of California, Los Angeles, CA (United States); Cheung, Cyrus [Univ. of California, Los Angeles, CA (United States)

    2016-01-12

    The objective of this research is to synthesize core-shell nano-structured metal oxide materials and investigate their structural, electronic and optical properties to understand the microscopic pathways governing the energy conversion process, thereby controlling and improving their efficiency. Specifically, the goal is to use a single metal oxide core-shell nanostructure and a single excitation source to generate photons with long emission lifetime over the entire visible spectrum and when controlled at the right ratio, generating white light. In order to achieve this goal, we need to control the energy transfer between light emitting elements, which dictates the control of their interatomic spacing and spatial distribution. We developed an economical wet chemical process to form the nanostructured core and to control the thickness and composition of the shell layers. With the help from using DOE funded synchrotron radiation facility, we delineated the growth mechanism of the nano-structured core and the shell layers, thereby enhancing our understanding of structure-property relation in these materials. Using the upconversion luminescence and the lifetime measurements as effective feedback to materials sysnthes is and integration, we demonstrated improved luminescence lifetimes of the core-shell nano-structures and quantified the optimal core-multi-shell structure with optimum shell thickness and composition. We developed a rare-earths co-doped LaPO4 core-multishell structure in order to produce a single white light source. It was decided that the mutli-shell method would produce the largest increase in luminescence efficiency while limiting any energy transfer that may occur between the dopant ions. All samples resulted in emission spectra within the accepted range of white light generation based on the converted CIE color coordinates. The white light obtained varied between warm and cool white depending on the layering architecture, allowing for the

  17. Importance of viscosity parameters in electrospinning: Of monolithic and core-shell fibers

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, Sandeep Kumar, E-mail: sktiwari@ntu.edu.sg; Venkatraman, Subbu S.

    2012-07-01

    Electrospun polymeric fibers are attractive candidates in the development of scaffolds for the tissue engineering and for providing new systems for delivery of bioactive molecules. Co-axial fibers have emerged as an efficient tool to protect the core material from the adverse conditions of electrospinning process, to spin difficult-to-process fluids and to generate fibers with much more control of the delivery of encapsulated bioactive molecules. Currently, there is very little reported work on the optimization of the processing parameters of electrospinning, especially core-shell electrospinning. This study extends the understanding of the role of solution viscosity as a vital material parameter for electrospinning of fibers. The spinning solutions were characterized for viscosity and optical imaging of the compound Taylor cone for spinnability, and the fibers were imaged by Scanning Electron Microscopy (SEM). Our experimental results, using PLGA as the model polymer, confirm that the solution concentration be above the entanglement concentration (C{sub e}) to obtain uniform beadless monolithic fibers; for core-shell fibers, the shell solution must fulfill the above criterion for spinnability and, further, the ratio of the viscosities of core and shell solutions ({eta}{sub core}/{eta}{sub shell}) has to be greater than a threshold value to get a stable compound Taylor cone and therefore to obtain uniform beadless core-shell fibers. Addition of surfactant led to reduction of the threshold {eta}{sub core}/{eta}{sub shell} (from 0.55 to 0.18) for the PVA-PLGA system. - Graphical abstract: A workable range of {eta}{sub core}/{eta}{sub shell} values exists for co-electrospinning in addition to other viscosity requirements for electrospinning of core and shell solutions. Highlights: Black-Right-Pointing-Pointer To produce uniform beadless fibers, the concentration of the polymer solution must be above entanglement concentration (C{sub e}). Black

  18. Core-shell polymer nanoparticles for prevention of GSH drug detoxification and cisplatin delivery to breast cancer cells.

    Science.gov (United States)

    Surnar, Bapurao; Sharma, Kavita; Jayakannan, Manickam

    2015-11-14

    Platinum drug delivery against the detoxification of cytoplasmic thiols is urgently required for achieving efficacy in breast cancer treatment that is over expressed by glutathione (GSH, thiol-oligopeptide). GSH-resistant polymer-cisplatin core-shell nanoparticles were custom designed based on biodegradable carboxylic functional polycaprolactone (PCL)-block-poly(ethylene glycol) diblock copolymers. The core of the nanoparticle was fixed as 100 carboxylic units and the shell part was varied using various molecular weight poly(ethylene glycol) monomethyl ethers (MW of PEGs = 100-5000 g mol(-1)) as initiator in the ring-opening polymerization. The complexation of cisplatin aquo species with the diblocks produced core-shell nanoparticles of 75 nm core with precise size control the particles up to 190 nm. The core-shell nanoparticles were found to be stable in saline solution and PBS and they exhibited enhanced stability with increase in the PEG shell thickness at the periphery. The hydrophobic PCL layer on the periphery of the cisplatin core behaved as a protecting layer against the cytoplasmic thiol residues (GSH and cysteine) and exhibited drug detoxification. In vitro drug-release studies revealed that the core-shell nanoparticles were ruptured upon exposure to lysosomal enzymes like esterase at the intracellular compartments. Cytotoxicity studies were performed both in normal wild-type mouse embryonic fibroblast cells (Wt-MEFs), and breast cancer (MCF-7) and cervical cancer (HeLa) cell lines. Free cisplatin and polymer drug core-shell nanoparticles showed similar cytotoxicity effects in the HeLa cells. In MCF-7 cells, the free cisplatin drug exhibited 50% cell death whereas complete cell death (100%) was accomplished by the polymer-cisplatin core-shell nanoparticles. Confocal microscopic images confirmed that the core-shell nanoparticles were taken up by the MCF-7 and HeLa cells and they were accumulated both at the cytoplasm as well at peri-nuclear environments

  19. Graded index and randomly oriented core-shell silicon nanowires with broadband and wide angle antireflection for photovoltaic cell applications

    CERN Document Server

    Pignalosa, P; Qiao, L; Tseng, M; Yi, Yasha

    2011-01-01

    Antireflection with broadband and wide angle properties is important for a wide range of applications on photovoltaic cells and display. The SiOx shell layer provides a natural antireflection from air to the Si core absorption layer. In this work, we have demonstrated the random core-shell silicon nanowires with both broadband (from 400nm to 900nm) and wide angle (from normal incidence to 60\\degree) antireflection characteristics within AM1.5 solar spectrum. The graded index structure from the randomly oriented core-shell (Air/SiOx/Si) nanowires may provide a potential avenue to realize a broadband and wide angle antireflection layer.

  20. Structural and optical investigation of semiconductor CdSe/CdS core-shell quantum dot thin films.

    Science.gov (United States)

    Sharma, A B; Sharma, Sudhir Kumar; Sharma, M; Pandey, R K; Reddy, D S

    2009-03-01

    Highly luminescent CdSe/CdS core-shell nanocrystals have been assembled on indium tin oxide (ITO) coated glass substrates using a wet synthesis route. The physical properties of the quantum dots (QD) have been investigated using X-ray diffraction, transmission electron microscopy and optical absorption spectroscopy techniques. These quantum dots showed a strong enhancement in the near band edge absorption. The in situ luminescence behavior has been interpreted in the light of the quantum confinement effect and induced strain in the core-shell structure.

  1. A simple method to prepare titania nanomaterials of core-shell structure,hollow nanospheres and mesoporous nanoparticles

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hui; LI DeQian; SHAO GaoSong; YUAN ZhongYong

    2009-01-01

    A simple method to prepare titania nanomaterials of core-shell structure,hollow nanospheres and mesoporous nanoparticlee has been developed.The core-shell nanostructures with NH4CI as core and aggregated NH4Cl crystals,which could be transformed into mesoporous anatase nanoparticles or hollow nanospheres by calcination at 500℃ or extraction with methanol,respectively.The hierarchical mesoporous nanostructures benefited the photocatalytic activities of the resultant titania nanomaterials,demonstrated by the UV light photodegradation of Methyl Orange.

  2. Shell Thickness-Dependent Strain Distributions of Confined Au/Ag and Ag/Au Core-Shell Nanoparticles

    OpenAIRE

    Feng Liu; Honghua Huang; Ying Zhang; Ting Yu; Cailei Yuan; Shuangli Ye

    2015-01-01

    The shell thickness-dependent strain distributions of the Au/Ag and Ag/Au core-shell nanoparticles embedded in Al2O3 matrix have been investigated by finite element method (FEM) calculations, respectively. The simulation results clearly indicate that there is a substantial strain applied on both the Au/Ag and Ag/Au core-shell nanoparticles by the Al2O3 matrix. For the Au/Ag nanoparticles, it can be found that the compressive strain existing in the shell is stronger than that on the center of ...

  3. Ultrasonic-assisted environmentally-friendly synergetic synthesis of nitroaromatic compounds in core/shell nanoreactor: A green protocol.

    Science.gov (United States)

    Maleki, Ali; Aghaie, Morteza

    2017-11-01

    An efficient sonochemical protocol for the nitration of aromatic compounds was described in the presence of a catalytic amount of sulfuric acid-functionalized silica-based core/shell magnetic nanocomposite at room temperature in an eco-friendly and recyclable media, deep eutectic solvent (DES), based on choline chloride and urea. The particle size, morphology and elemental analysis of the core/shell nanocatalyst were carried out by TEM, SEM, EDX and XRD analyses. The nanocatalyst and DES were easily recovered from the reaction mixture quantitatively and reused several times. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Preparation of luminescent CdTe quantum dots doped core-shell nanoparticles and their application in cell recognition

    Institute of Scientific and Technical Information of China (English)

    LI Zhaohui; WANG Kemin; TAN Weihong; LI Jun; FU Zhiying; WANG Yilin; LIU Jianbo; YANG Xiaohai

    2005-01-01

    Based on the reverse microemulsion technique, luminescent quantum dots doped core-shell nanoparticles have been prepared by employing silica as the shell and CdTe quantum dots as the core of the nanoparticles, which have an excellent solubility and dispersibility, especially amine and phosphonate groups have been modified on their surface synchronously. In comparison with CdTe quantum dots, these nanoparticles show superiority in chemical and photochemical stability. The quantum dots doped core-shell nanoparticles were successfully linked with lactobionic acid by amine group on it, which was used to recognize living liver cells.

  5. A simple method to prepare titania nanomaterials of core-shell structure, hollow nanospheres and mesoporous nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A simple method to prepare titania nanomaterials of core-shell structure, hollow nanospheres and mesoporous nanoparticles has been developed. The core-shell nanostructures with NH4Cl as core and TiO2·xH2O-NH4Cl as shell were prepared in nonaqueous system by the deposition on the surface of the aggregated NH4Cl crystals, which could be transformed into mesoporous anatase nanoparticles or hollow nanospheres by calcination at 500℃ or extraction with methanol, respectively. The hierarchical mesoporous nanostructures benefited the photocatalytic activities of the resultant titania nanomateri-als, demonstrated by the UV light photodegradation of Methyl Orange.

  6. Influence of Elastic and Surface Strains on the Optical Properties of Semiconducting Core-Shell Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Mangeri, John; Heinonen, Olle; Karpeyev, Dmitry; Nakhmanson, Serge

    2015-07-01

    Core-shell nanoparticle systems of Zn-ZnO and ZnO-TiO2 are studied computationally using finite-element methods. The inclusion of a surface free energy and the elastic mismatch of the core and shell create an imprinting effect within the shell structure that produces a wide variation of strains. Due to this diversity of strains, the sharp, direct, band-gap edges of the bulk semiconductor are observed to be broadened. We show that a variety of factors, such as particle size, core-to-shell volume ratio, applied hydrostatic pressure, shell microstructure, as well as the effect of elastic anisotropy, can influence the distribution of optical band-gap values throughout the particle.

  7. Ab Initio No Core Shell Model - Recent Results and Further Prospects

    CERN Document Server

    Vary, James P; Potter, Hugh; Caprio, Mark A; Smith, Robin; Binder, Sven; Calci, Angelo; Fischer, Sebastian; Langhammer, Joachim; Roth, Robert; Aktulga, Hasan Metin; Ng, Esmond; Yang, Chao; Oryspayev, Dossay; Sosonkina, Masha; Saule, Erik; Çatalyürek, Ümit

    2015-01-01

    There has been significant recent progress in solving the long-standing problems of how nuclear shell structure and collective motion emerge from underlying microscopic inter-nucleon interactions. We review a selection of recent significant results within the ab initio No Core Shell Model (NCSM) closely tied to three major factors enabling this progress: (1) improved nuclear interactions that accurately describe the experimental two-nucleon and three-nucleon interaction data; (2) advances in algorithms to simulate the quantum many-body problem with strong interactions; and (3) continued rapid development of high-performance computers now capable of performing $20 \\times 10^{15}$ floating point operations per second. We also comment on prospects for further developments.

  8. Enhancement of perovskite-based solar cells employing core-shell metal nanoparticles.

    Science.gov (United States)

    Zhang, Wei; Saliba, Michael; Stranks, Samuel D; Sun, Yao; Shi, Xian; Wiesner, Ulrich; Snaith, Henry J

    2013-09-11

    Recently, inorganic and hybrid light absorbers such as quantum dots and organometal halide perovskites have been studied and applied in fabricating thin-film photovoltaic devices because of their low-cost and potential for high efficiency. Further boosting the performance of solution processed thin-film solar cells without detrimentally increasing the complexity of the device architecture is critically important for commercialization. Here, we demonstrate photocurrent and efficiency enhancement in meso-superstructured organometal halide perovskite solar cells incorporating core-shell Au@SiO2 nanoparticles (NPs) delivering a device efficiency of up to 11.4%. We attribute the origin of enhanced photocurrent to a previously unobserved and unexpected mechanism of reduced exciton binding energy with the incorporation of the metal nanoparticles, rather than enhanced light absorption. Our findings represent a new aspect and lever for the application of metal nanoparticles in photovoltaics and could lead to facile tuning of exciton binding energies in perovskite semiconductors.

  9. Enhanced field emission properties of ZnO-Ag2S core-shell heterojunction nanowires.

    Science.gov (United States)

    Wang, Guojing; Li, Mingyang; Chen, Chienhua; Lv, Shasha; Liao, Jiecui; Li, Zhengcao

    2016-06-07

    A simple approach to Ag2S quantum dot (QD) modification was used to tune the field emission (FE) properties of ZnO nanowire arrays (NWAs). By a simple and facile successive ionic layer adsorption and reaction (SILAR) approach, Ag2S QDs were uniformly and densely packed on ZnO nanowires (NWs) to form ZnO-Ag2S core-shell heterojunction structures. The FE properties of ZnO NWAs were effectively tuned by controlling the amount of Ag2S QDs. The turn-on field first reduces and then increases as the amount of Ag2S QDs increases, while the trend of the field-enhancement factor is inverse. This is attributed to the clustering of Ag2S QDs into nanoparticles (NPs) which cover the nanowire tips, as SILAR cycles increase.

  10. Synthesis and characterization of magnetic polymer microspheres with a core-shell structure

    Institute of Scientific and Technical Information of China (English)

    Ming; Lu; Shu; Bai; Kun; Yang; Yan; Sun

    2007-01-01

    Non-porous magnetic polymer microspheres with a core-shell structure were prepared by a novel micro-suspension polymerization technique.A stable iron oxide ferrofluid was used to supply the magnetic core, and the polymeric shell was made of glycidyl methacrylate (GMA monomer)and ethylene dimethacrylate (cross-linker). In the preparation, polyvinyl alcohol was used as the stabilizer, and a lauryl alcohol mixture as the dispersant. The influence of various conditions such as aqueous phase volume, GMA and initiator amounts, reaction time and stirring speed on the character of the microspheres was investigated. The magnetic microspheres were then characterized briefly. The results indicate that the microspheres with active epoxy groups had a narrow size distribution range from 1 to 10 μm with a volume-weighted mean diameter of 4.5 μm.The saturation magnetization reached 19.9 emu/g with little coercivity and remanence.

  11. Spectral Tuning of Plasmon Resonance in a Core/Shell (Au)Ag Nanocomposite

    Science.gov (United States)

    Panarin, A. Yu.; Abakshonok, A. V.; Agabekov, V. E.; Eryomin, A. N.; Terekhov, S. N.

    2015-01-01

    A bimetallic (Au)Ag nanocomposite with a core/shell structure was synthesized in aqueous solution and a H2O/EtOH mixture (1:1) containing polymers (carboxymethylcellulose, sodium polystyrenesulfonate, polyvinylpyrrolidone, dextran). Its structure and optical properties were characterized. The shape and position of scattering bands of colloidal noble-metal nanoparticles with optical density <0.1 were undistorted by solvent absorption. Scattering spectra had to be corrected for solutions of greater optical density. A method for correcting the resonant lightscattering spectra of Au and (Au)Ag nanoparticles was proposed for a single-beam apparatus. The possibility of surface plasmon resonance tuning for (Au)Ag with a short-wavelength shift of ~150 nm for the absorption band maximum and of ~84 nm for the resonant scattering band was demonstrated by varying the AgNO3 concentration during formation of the silver shell on the gold core.

  12. Core/shell magnetic mesoporous silica nanoparticles with radially oriented wide mesopores

    Directory of Open Access Journals (Sweden)

    Nikola Ž. Knežević

    2014-06-01

    Full Text Available Core/shell nanoparticles, containing magnetic iron-oxide (maghemite core and mesoporous shell with radial porous structure, were prepared by dispersing magnetite nanoparticles and adding tetraethylorthosilicate to a basic aqueous solution containing structure-templating cetyltrimethylammonium bromide and a pore-swelling mesithylene. The material is characterized by SEM and TEM imaging, nitrogen sorption and powder X-ray diffraction. Distinctive features of the prepared material are its high surface area (959 m2/g, wide average pore diameter (12.4 nm and large pore volume (2.3 cm3/g. The material exhibits radial pore structure and the high angle XRD pattern characteristic for maghemite nanoparticles, which are obtained upon calcination of the magnetite-containing material. The observed properties of the prepared material may render the material applicable in separation, drug delivery, sensing and heterogeneous catalysis.

  13. Ab Initio No-Core Shell Model Calculations Using Realistic Two- and Three-Body Interactions

    Energy Technology Data Exchange (ETDEWEB)

    Navratil, P; Ormand, W E; Forssen, C; Caurier, E

    2004-11-30

    There has been significant progress in the ab initio approaches to the structure of light nuclei. One such method is the ab initio no-core shell model (NCSM). Starting from realistic two- and three-nucleon interactions this method can predict low-lying levels in p-shell nuclei. In this contribution, we present a brief overview of the NCSM with examples of recent applications. We highlight our study of the parity inversion in {sup 11}Be, for which calculations were performed in basis spaces up to 9{Dirac_h}{Omega} (dimensions reaching 7 x 10{sup 8}). We also present our latest results for the p-shell nuclei using the Tucson-Melbourne TM three-nucleon interaction with several proposed parameter sets.

  14. Open structure ZnO/CdSe core/shell nanoneedle arrays for solar cells.

    Science.gov (United States)

    Chen, Yanxue; Wei, Lin; Zhang, Guanghua; Jiao, Jun

    2012-09-20

    Open structure ZnO/CdSe core/shell nanoneedle arrays were prepared on a conducting glass (SnO2:F) substrate by solution deposition and electrochemical techniques. A uniform CdSe shell layer with a grain size of approximately several tens of nanometers was formed on the surface of ZnO nanoneedle cores after annealing at 400°C for 1.5 h. Fabricated solar cells based on these nanostructures exhibited a high short-circuit current density of about 10.5 mA/cm2 and an overall power conversion efficiency of 1.07% with solar illumination of 100 mW/cm2. Incident photo-to-current conversion efficiencies higher than 75% were also obtained.

  15. Light-Harvesting Nanoparticle Core-Shell Clusters with Controllable Optical Output.

    Science.gov (United States)

    Sun, Dazhi; Tian, Ye; Zhang, Yugang; Xu, Zhihua; Sfeir, Matthew Y; Cotlet, Mircea; Gang, Oleg

    2015-06-23

    We used DNA self-assembly methods to fabricate a series of core-shell gold nanoparticle-DNA-colloidal quantum dot (AuNP-DNA-Qdot) nanoclusters with satellite-like architecture to modulate optical (photoluminescence) response. By varying the intercomponent distance through the DNA linker length designs, we demonstrate precise tuning of the plasmon-exciton interaction and the optical behavior of the nanoclusters from regimes characterized by photoluminescence quenching to photoluminescence enhancement. The combination of detailed X-ray scattering probing with photoluminescence intensity and lifetime studies revealed the relation between the cluster structure and its optical output. Compared to conventional light-harvesting systems like conjugated polymers and multichromophoric dendrimers, the proposed nanoclusters bring enhanced flexibility in controlling the optical behavior toward a desired application, and they can be regarded as controllable optical switches via the optically pumped color.

  16. Preparation and Characterization of Nickel Ferrite-SiO2/Ag Core/Shell Nanocomposites

    Directory of Open Access Journals (Sweden)

    I. G. Blanco-Esqueda

    2015-01-01

    Full Text Available Magnetic composites with silver nanoparticles bonded to their surface were successfully prepared using a simple chemical method. By means of a sol-gel technique, nickel ferrite nanoparticles have been prepared and coated with silica to control and avoid their magnetic agglomeration. The structural and magnetic properties of the nanoparticles were studied in function of the annealing temperature. Then, silver nanoparticles were incorporated by hydrolysis-condensation of tetraethyl orthosilicate, which contains silver nitrate on the surface of the nickel ferrite-SiO2 core/shell. Samples were characterized using X-ray diffraction, IR spectroscopy, SEM, and magnetometry. Results show that the silica covered the nickel ferrite nanoparticles and the silver nanoparticles remain stable in the surface of the composite.

  17. Functionalized core-shell hydrogel microsprings by anisotropic gelation with bevel-tip capillary

    Science.gov (United States)

    Yoshida, Koki; Onoe, Hiroaki

    2017-04-01

    This study describes a novel microfluidic-based method for the synthesis of hydrogel microsprings that are capable of encapsulating various functional materials. A continuous flow of alginate pre-gel solution can spontaneously form a hydrogel microspring by anisotropic gelation around the bevel-tip of the capillary. This technique allows fabrication of hydrogel microsprings using only simple capillaries and syringe pumps, while their complex compartmentalization characterized by a laminar flow inside the capillary can contribute to the optimization of the microspring internal structure and functionality. Encapsulation of several functional materials including magnetic-responsive nanoparticles or cell dispersed collagen for tissue scaffold was demonstrated to functionalize the microsprings. Our core-shell hydrogel microsprings have immense potential for application in a number of fields, including biological/chemical microsensors, biocompatible soft robots/microactuators, drug release, self-assembly of 3D structures and tissue engineering.

  18. Diffraction data of core-shell nanoparticles from an X-ray free electron laser.

    Science.gov (United States)

    Li, Xuanxuan; Chiu, Chun-Ya; Wang, Hsiang-Ju; Kassemeyer, Stephan; Botha, Sabine; Shoeman, Robert L; Lawrence, Robert M; Kupitz, Christopher; Kirian, Richard; James, Daniel; Wang, Dingjie; Nelson, Garrett; Messerschmidt, Marc; Boutet, Sébastien; Williams, Garth J; Hartmann, Elisabeth; Jafarpour, Aliakbar; Foucar, Lutz M; Barty, Anton; Chapman, Henry; Liang, Mengning; Menzel, Andreas; Wang, Fenglin; Basu, Shibom; Fromme, Raimund; Doak, R Bruce; Fromme, Petra; Weierstall, Uwe; Huang, Michael H; Spence, John C H; Schlichting, Ilme; Hogue, Brenda G; Liu, Haiguang

    2017-04-11

    X-ray free-electron lasers provide novel opportunities to conduct single particle analysis on nanoscale particles. Coherent diffractive imaging experiments were performed at the Linac Coherent Light Source (LCLS), SLAC National Laboratory, exposing single inorganic core-shell nanoparticles to femtosecond hard-X-ray pulses. Each facetted nanoparticle consisted of a crystalline gold core and a differently shaped palladium shell. Scattered intensities were observed up to about 7 nm resolution. Analysis of the scattering patterns revealed the size distribution of the samples, which is consistent with that obtained from direct real-space imaging by electron microscopy. Scattering patterns resulting from single particles were selected and compiled into a dataset which can be valuable for algorithm developments in single particle scattering research.

  19. Periodic mesoporous organosilica (PMO) materials with uniform spherical core-shell structure.

    Science.gov (United States)

    Haffer, Stefanie; Tiemann, Michael; Fröba, Michael

    2010-09-10

    We report the synthesis of monodisperse, spherical periodic mesoporous organosilica (PMO) materials. The particles have diameters between about 350 and 550 nm. They exhibit a regular core-shell structure with a solid, non-porous silica core and a mesoporous PMO shell with a thickness of approximately 75 nm and uniform pores of about 1.7 nm. The synthesis of the core and the shell is carried out in a one-pot, two-stage synthesis and can be accomplished at temperatures between 25 and 100 °C. Higher synthesis temperatures lead to substantial shrinking of the solid core, generating an empty void between core and shell. This leads to interesting cavitation phenomena in the nitrogen physisorption analysis at 77.4 K.

  20. Effect of Ag Templates on the Formation of Au-Ag Hollow/Core-Shell Nanostructures.

    Science.gov (United States)

    Tsai, Chi-Hang; Chen, Shih-Yun; Song, Jenn-Ming; Haruta, Mitsutaka; Kurata, Hiroki

    2015-12-01

    Au-Ag alloy nanostructures with various shapes were synthesized using a successive reduction method in this study. By means of galvanic replacement, twined Ag nanoparticles (NPs) and single-crystalline Ag nanowires (NWs) were adopted as templates, respectively, and alloyed with the same amount of Au(+) ions. High angle annular dark field-scanning TEM (HAADF-STEM) images observed from different rotation angles confirm that Ag NPs turned into AuAg alloy rings with an Au/Ag ratio of 1. The shifts of surface plasmon resonance and chemical composition reveal the evolution of the alloy ring formation. On the other hand, single-crystalline Ag NWs became Ag@AuAg core-shell wires instead of hollow nanostructure through a process of galvanic replacement. It is proposed that in addition to the ratio of Ag templates and Au ion additives, the twin boundaries of the Ag templates were the dominating factor causing hollow alloy nanostructures.

  1. Growth of Au@Ag core-shell pentatwinned nanorods: tuning the end facets.

    Science.gov (United States)

    Zhang, Weiqing; Goh, Hao Ying Johnny; Firdoz, Shaik; Lu, Xianmao

    2013-09-16

    Au@Ag core-shell nanorods with tunable end facets are obtained by coating Au bipyramids (BPs) with Ag. The resultant nanorods exhibit a pentatwinned crystal structure with tips terminated with either {110} or {111} facets. The control over the end facets is achieved by varying the capping agents and tuning the reduction rate of Ag. Specifically, when Ag is reduced slowly, Au@Ag nanorods with flat {110} end facets are formed with cetyltrimethylammonium bromide (CTAB) as the capping agent. If CTAB is replaced with cetyltrimethylammonium chloride (CTAC), Au@Ag nanorods with tips terminated with {111} facets are obtained. However, at a high Ag reduction rate, dumbbell-shaped Au@Ag nanorods are formed, with either CTAB or CTAC as the capping agent. The morphological evolution of the nanorods in each case is closely followed and a growth mechanism is proposed.

  2. Core-shell poly-methylmethacrylate nanoparticles as effective carriers of electrostatically loaded anionic porphyrin.

    Science.gov (United States)

    Varchi, Greta; Benfenati, Valentina; Pistone, Assunta; Ballestri, Marco; Sotgiu, Giovanna; Guerrini, Andrea; Dambruoso, Paolo; Liscio, Andrea; Ventura, Barbara

    2013-05-01

    Among the medical applications of nanoparticles, their usage as photosensitizer (PS) carriers for photodynamic therapy (PDT) has attracted increasing attention. In the present study we explored the morphological and photophysical properties of core-shell PMMA nanoparticles (PMMA-NPs) electrostatically post-loaded with the synthetic, water soluble 5,10,15,20-tetrakis(4-sulphonatophenyl)-porphyrin (TPPS4). pH response and singlet oxygen analyses of differently loaded samples proved the high capability of the PMMA-NPs to shield the PS from the environment, while retaining the PS singlet oxygen production capability. Preliminary in vitro imaging and phototoxicity experiments on HepG2 cells demonstrated the efficacy of the system to trigger photoinduced cell death in the culture.

  3. Synthesis of Co/MFe(2)O(4) (M = Fe, Mn) Core/Shell Nanocomposite Particles.

    Science.gov (United States)

    Peng, Sheng; Xie, Jin; Sun, Shouheng

    2008-01-01

    Monodispersed cobalt nanoparticles (NPs) with controllable size (8-14 nm) have been synthesized using thermal decomposition of dicobaltoctacarbonyl in organic solvent. The as-synthesized high magnetic moment (125 emu/g) Co NPs are dispersible in various organic solvents, and can be easily transferred into aqueous phase by surface modification using phospholipids. However, the modified hydrophilic Co NPs are not stable as they are quickly oxidized, agglomerated in buffer. Co NPs are stabilized by coating the MFe(2)O(4) (M = Fe, Mn) ferrite shell. Core/shell structured bimagnetic Co/MFe(2)O(4) nanocomposites are prepared with tunable shell thickness (1-5 nm). The Co/MFe(2)O(4) nanocomposites retain the high magnetic moment density from the Co core, while gaining chemical and magnetic stability from the ferrite shell. Comparing to Co NPs, the nanocomposites show much enhanced stability in buffer solution at elevated temperatures, making them promising for biomedical applications.

  4. Synthesis and characterization of biocompatible antimicrobial N-halamine-functionalized titanium dioxide core-shell nanoparticles.

    Science.gov (United States)

    Li, Lin; Ma, Wei; Cheng, Xiaoli; Ren, Xuehong; Xie, Zhiwei; Liang, Jie

    2016-12-01

    As one of the most powerful biocides, N-halamine based antimicrobial materials have attracted much interest due to their non-toxicity, rechargeability, and rapid inactivation against a broad range of microorganisms. In this study, novel titanium dioxide-ADMH core-shell nanoparticles [TiO2@poly (ADMH-co-MMA) NPs] were prepared via miniemulsion polymerization using 3-allyl-5,5-dimethylhydantoin (ADMH) and methyl methacrylate (MMA) with nano-TiO2. The produced nanoparticles were characterized by FT-IR, TEM, TGA, and XPS. The UV stability of N-halamine nanoparticles has been improved with the addition of titanium dioxide. After chlorination treatment by sodium hypochlorite, biocidal efficacies of the chlorinated nanoparticles against S. aureus (ATCC 6538) and E. coli O157:H7 (ATCC 43895) were determined. The nanoparticles showed excellent antimicrobial properties against bacteria within brief contact time. In addition, in vitro cell cytocompatibility tests showed that the antibacterial nanoparticles had good biocompatibility.

  5. Observation of electron interference in GaAs/InAs core/shell nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Guel, Oender; Bloemers, Christian; Rieger, Torsten; Lepsa, Mihail I.; Lueth, Hans; Gruetzmacher, Detlev [Peter Gruenberg Institut (PGI-9), Forschungszentrum Juelich GmbH (Germany); JARA-Fundamentals of Future Information Technology, 52074 Aachen (Germany); Schaepers, Thomas [Peter Gruenberg Institut (PGI-9), Forschungszentrum Juelich GmbH (Germany); JARA-Fundamentals of Future Information Technology, 52074 Aachen (Germany); II. Physikalisches Institut, RWTH Aachen University (Germany)

    2012-07-01

    Electron and spin interference in mesoscopic semiconductor systems is of fundamental interest for future spin- and quantum-based information technology. In this context, bottom-up device approaches such as templated self-assembled nanowires are particularly interesting. Here we report on electron wave interference in GaAs/InAs core/shell nanowires grown by molecular beam epitaxy. Magnetotransport measurements were performed at 1.8 K and at magnetic fields up to 10 T. Additionally, gate voltage dependence of magnetotransport characteristics is investigated. Conductance oscillations are observed as a function of the magnetic field as well as the gate voltage. Fourier analysis of data suggests periodicity both in magnetic field and gate voltage. Further, phase-coherent transport properties of these nanowires are unravelled by applying the magnetic field in different orientations as well as by temperature dependent measurements.

  6. Investigation of electroluminescence properties of CdTe@CdS core-shell nanocrystals (NCs)

    Indian Academy of Sciences (India)

    M Molaei; S Pourjafari

    2014-02-01

    In this work, CdTe@CdS NCs were synthesized using a thermochemical approach and synthesized NCs were used as an emissive layer, a light emitting device, with ITO/MoO3/PVK/CdTe@CdS(core-shell)/Mg:Ag structure. Structural and optical properties of synthesized NCs were investigated by means of XRD, UV–Vis and photoluminescence (PL) analyses. Fabricated device was characterized by electroluminescence spectra. XRD analysis demonstrated cubic phase NCs. Photoluminescence spectra showed a narrow band emission with a peak centred at about 600 nm. Fabricated device showed an emission at 600 nm, which is related to CdTe@CdS NCs. Turn on voltage of fabricated device is about 8 V and brightness is 53.7 Cd/m2 at a working voltage of about 14.57 V.

  7. A multifunctional core-shell nanoparticle for dendritic cell-based cancer immunotherapy

    Science.gov (United States)

    Cho, Nam-Hyuk; Cheong, Taek-Chin; Min, Ji Hyun; Wu, Jun Hua; Lee, Sang Jin; Kim, Daehong; Yang, Jae-Seong; Kim, Sanguk; Kim, Young Keun; Seong, Seung-Yong

    2011-10-01

    Dendritic cell-based cancer immunotherapy requires tumour antigens to be delivered efficiently into dendritic cells and their migration to be monitored in vivo. Nanoparticles have been explored as carriers for antigen delivery, but applications have been limited by the toxicity of the solvents used to make nanoparticles, and by the need to use transfection agents to deliver nanoparticles into cells. Here we show that an iron oxide-zinc oxide core-shell nanoparticle can deliver carcinoembryonic antigen into dendritic cells while simultaneously acting as an imaging agent. The nanoparticle-antigen complex is efficiently taken up by dendritic cells within one hour and can be detected in vitro by confocal microscopy and in vivo by magnetic resonance imaging. Mice immunized with dendritic cells containing the nanoparticle-antigen complex showed enhanced tumour antigen specific T-cell responses, delayed tumour growth and better survival than controls.

  8. Biodegradable and magnetic core-shell composite particle prepared by emulsion solvent diffusion method

    Science.gov (United States)

    Oka, Chiemi; Ushimaru, Kazunori; Horiishi, Nanao; Tsuge, Takeharu; Kitamoto, Yoshitaka

    2016-02-01

    The present paper describes optimization of preparation conditions of a core-shell composite particle, and its heat generation by alternating magnetic fields. The composite particles are prepared with a modified emulsion solvent diffusion method, which is combined with Pickering emulsion stabilized by magnetic nanoparticles. In this method, the magnetic nanoparticles act as an emulsifier, and its amount and size are crucial to morphology of the composite particles. The magnetic nanoparticles of 8-9 nm would be strongly adsorbed at a liquid-liquid interface rather than the larger nanoparticles. At the optimized concentration of the magnetic nanoparticle’s suspension for the preparation, small and uniform composite particles are obtained since the amount of the nanoparticles is enough to prevent coalescence of droplets during the formation of the composites. The heat generation by alternating magnetic fields emerged certainly. This result suggests the composite particles have a property as a heat-generating carrier for hyperthermia treatment.

  9. Three-dimensional core-shell ferromagnetic nanowires grown by focused electron beam induced deposition

    Science.gov (United States)

    Pablo-Navarro, Javier; Magén, César; María de Teresa, José

    2016-07-01

    Functional nanostructured materials often rely on the combination of more than one material to confer the desired functionality or an enhanced performance of the device. Here we report the procedure to create nanoscale heterostructured materials in the form of core-shell nanowires by focused electron beam induced deposition (FEBID) technologies. In our case, three-dimensional (3D) nanowires (nanostructures to demonstrate that the morphology of the shell is conserved during Pt coating, the surface oxidation is suppressed or confined to the Pt layer, and the average magnetization of the core is strengthened up to 30%. The proposed approach paves the way to the fabrication of 3D FEBID nanostructures based on the smart alternate deposition of two or more materials combining different physical properties or added functionalities.

  10. ZnO-nanocarbon core-shell type hybrid quantum dots

    CERN Document Server

    Choi, Won Kook

    2017-01-01

    This book offers a comprehensive overview of ZnO-nano carbon core shell hybrid issues. There is significant interest in metal oxide/nanocarbon hybrid functional materials in the field of energy conversion and storage as electrode materials for supercapacitors, Li ion secondary battery, electrocatalysts for water splitting, and optoelectronic devices such as light emitting diodes and solar photovoltaic cells. Despite efforts to manipulate more uniform metal oxide-nanocarbon nanocomposite structures, they have shown poor performance because they are randomly scattered and non-uniformly attached to the nanocarbon surface. For higher and more effective performance of the hybrid structure, 3D conformal coating on metal oxides are highly desirable. In the first part of the book, the physical and chemical properties of ZnO and nanocarbons and the state-of-the-art in related research are briefly summarized. In the next part, the 3D conformal coating synthetic processes of ZnO templated nanocarbon hybrid materials suc...

  11. Synthesis of core-shell iron nanoparticles via a new (novel) approach

    Science.gov (United States)

    Chaudhary, Rakesh P.; Koymen, Ali R.

    2014-03-01

    Carbon-encapsulated iron (Fe) nanoparticles were synthesized by a newly developed method in toluene. Transmission Electron Microscopy (TEM) and High Resolution Transmission Electron Microscopy (HRTEM) of the as prepared sample reveal that core-shell nanostructures have been formed with Fe as core and graphitic carbon as shell. Fe nanoparticles with diameter 11nm to 102 nm are encapsulated by 6-8 nm thick graphitic carbon layers. There was no iron carbide formation observed between the Fe core and the graphitic shell. The Fe nanoparticles have body centered cubic (bcc) crystal structure. The magnetic hysteresis loop of the as synthesized powder at room temperature showed a saturation magnetization of 9 Am2 kg-1. After thermal treatment crystalline order of the samples improved and hence saturation magnetization increased to 24 Am2kg-1. We foresee that the carbon-encapsulated Fe nanoparticles are biologically friendly and could have potential applications in Magnetic Resonance Imaging (MRI) and Photothermal cancer therapy.

  12. Preparation of novel magnetic polyurethane foam nanocomposites by using core-shell nanoparticles

    Directory of Open Access Journals (Sweden)

    Mir Mohammad Alavi Nikje

    Full Text Available Abstract Iron oxide magnetic nanoparticles (NP's converted to the core- shell structres by reacting with by n-(2-aminoethyl-3-aminopropyl trimethoxysilane (AEAP incorporated in polyurethane flexible (PUF foam formulations. Fourier transform spectra, thermal gravimetric analysis, scanning electron images, thermo-mechanical analysis and magnetic properties of the prepared nanocomposites were studied. Obtained data shown that by the increasing of the amine modified magnetic iron oxide NP's up to 3% in the polymer matrix, thermal and magnetic properties improved in comparison with pristine foams. In addition, due to the presence of functional groups on the magnetic NP's surface, hard phases formation decrease in the bulk polymer and cause decreasing of glass transition temperature.

  13. Lattice-strain control of the activity in dealloyed core-shell fuel cell catalysts.

    Science.gov (United States)

    Strasser, Peter; Koh, Shirlaine; Anniyev, Toyli; Greeley, Jeff; More, Karren; Yu, Chengfei; Liu, Zengcai; Kaya, Sarp; Nordlund, Dennis; Ogasawara, Hirohito; Toney, Michael F; Nilsson, Anders

    2010-06-01

    Electrocatalysis will play a key role in future energy conversion and storage technologies, such as water electrolysers, fuel cells and metal-air batteries. Molecular interactions between chemical reactants and the catalytic surface control the activity and efficiency, and hence need to be optimized; however, generalized experimental strategies to do so are scarce. Here we show how lattice strain can be used experimentally to tune the catalytic activity of dealloyed bimetallic nanoparticles for the oxygen-reduction reaction, a key barrier to the application of fuel cells and metal-air batteries. We demonstrate the core-shell structure of the catalyst and clarify the mechanistic origin of its activity. The platinum-rich shell exhibits compressive strain, which results in a shift of the electronic band structure of platinum and weakening chemisorption of oxygenated species. We combine synthesis, measurements and an understanding of strain from theory to generate a reactivity-strain relationship that provides guidelines for tuning electrocatalytic activity.

  14. Flux Quantum Oscillations in GaAs/InAs Core/shell Nanowires

    Science.gov (United States)

    Grützmacher, D.; Gül, Ö.; Demarina, N.; Lepsa, M.; Hardtdegen, H.; Rieger, T.; Haas, F.; Sladek, K.; Blömers, Ch.; Lüth, H.; Schäpers, Th.

    2013-05-01

    Phase-based quantum devices are promising for future fast and low-power consumption nanoelectronics since electron interference might be used for the switching function. A robust operation of these devices necessitates nanoscale dimensions. The epitaxial growth of III/V nanowires opens unique possibilities for the realization of low dimensional structures by employing radial and axial heterostructures within the nanowire. Here we discuss the growth of GaAs/InAs core/shell nanowires as well as their magneto-transport properties. The InAs shell forms a tube shaped electron gas with coherent circular states. Magneto transport measurements with a magnetic field parallel to the axis of the nanowire exhibit oscillations in the conductivity with a periodicity of 1/Φ with Φ being the magnetic flux. It is shown that the oscillations can be explained by the number of coherent quantum states participating in the transport.

  15. Core-shell gold J-aggregate nanoparticles for highly efficient strong coupling applications

    Science.gov (United States)

    Djoumessi Lekeufack, Diane; Brioude, Arnaud; Coleman, Anthony W.; Miele, Philippe; Bellessa, Joel; De Zeng, Li; Stadelmann, Pierre

    2010-06-01

    We have developed a straightforward synthetic route to prepare core-shell systems based on gold nanoparticles (NPs) surrounded with J-aggregates molecules. This synthesis allows the direct and efficient coating, at room temperature, of pretreated citrate-stabilized gold NPs with 5, 5', 6, 6'-tetrachloro-1-1'-diethyl-3, 3'-di (4-sulfobutyl)-benzimidazolocarbocyanine (TDBC), without supplementary adding of salts and bases during the synthesis. As the size of gold particle is tunable, the precise optimization of the strong coupling between the electronic transitions of organic components (TDBC) and the plasmon modes of the gold NPs is achieved corresponding to a Rabi energy of 220 meV, a value not yet obtained in such a system.

  16. Magnetic proximity effect features in antiferromagnetic/ferrimagnetic core-shell nanoparticles

    OpenAIRE

    Golosovsky, I. V.; Suriñach, Santiago

    2009-01-01

    A study of “inverted” core-shell, MnO/γ-Mn2O3, nanoparticles is presented. Crystal and magnetic structures and characteristic sizes have been determined by neutron diffraction for the antiferromagnetic core (MnO) and the ferrimagnetic shell (γ-Mn2O3). Remarkably, while the MnO core is found to have a TN not far from its bulk value, the magnetic order of the γ-Mn2O3 shell is stable far above TC, exhibiting two characteristic temperatures, at T~ 40  K [TC(γ-Mn2O3)] and at T~120  K [~ TN(MnO)]. ...

  17. Tunable multiple Fano resonances in magnetic single-layered core-shell particles

    CERN Document Server

    Arruda, Tiago Jose; Pinheiro, Felipe Arruda

    2015-01-01

    We investigate multiple Fano, comblike scattering resonances in single-layered, concentric core-shell nanoparticles composed of magnetic materials. Using the Lorenz-Mie theory, we derive, in the long-wavelength limit, an analytical condition for the occurrence of comblike resonances in the single scattering by coated spheres. This condition establishes that comblike scattering response uniquely depends on material parameters and thickness of the shell, provided that it is magnetic and thin compared to the scatterer radius. We also demonstrate that comblike scattering response shows up beyond the long-wavelength limit and it is robust against absorption. Since multiple Fano resonances are shown to depend explicitly on the magnetic permeability of the shell, we argue that both the position and profile of the comblike, morphology-dependent resonances could be externally tuned by exploiting the properties of engineered magnetic materials.

  18. COPPER/CARBON CORE SHELL NANOPARTICLES AS ADDITIVE FOR NATURAL FIBER/WOOD PLASTIC BLENDS

    Directory of Open Access Journals (Sweden)

    Qinglin Wu,

    2012-06-01

    Full Text Available Copper/carbon core/shell nanoparticles (CCCSNs recently have been introduced as an industrial material. In this paper, composites based on high density polyethylene (HDPE, bamboo fiber, CCCSNs, and coupling agent (MAPE were prepared by melt compounding. The influence of CCCSN content on the resulting composites’ mechanical, biological resistance, and thermal properties was investigated. It was found that CCCSNs within the carbon black matrix were processed well with bamboo fiber-plastic blends through mixing and injection molding. The materials enhanced composite strength and modulus-related properties. Composites with CCCSNs and natural fibers reduced heat capacity and thermal diffusivity. Composites with CCCSN materials also enhanced termite and mold performance. Thus, the material can be used as additive for plastics and other polymers to modify strength properties, biological resistance (e.g., mold and stain, and thermal conductivity properties.

  19. Transition from core-shell to Janus chemical configuration for bimetallic nanoparticles

    Science.gov (United States)

    Langlois, Cyril; Li, Z. L.; Yuan, Jun; Alloyeau, Damien; Nelayah, Jaysen; Bochicchio, Davide; Ferrando, Riccardo; Ricolleau, Christian

    2012-05-01

    In order to determine the possibilities to control the chemical configuration of bimetallic nanoparticles, we have considered CuAg nanoparticles synthesized by a physical route as a model in this study. The synthesis was made by pulsed laser deposition under ultra-high vacuum conditions, via a sequential deposition procedure. We show that the temperature of the substrate and the absolute quantity of Ag in a particle are the main parameters that drive the chemical configuration. To explain the transition from a core-shell configuration to a Janus configuration as a function of Ag quantity, we have conducted density-functional theory calculations and atomistic molecular dynamics simulations to investigate the stability of this system. The results are presented together with the experimental observations.

  20. Flexible, silver nanowire network nickel hydroxide core-shell electrodes for supercapacitors

    Science.gov (United States)

    Yuksel, Recep; Coskun, Sahin; Kalay, Yunus Eren; Unalan, Husnu Emrah

    2016-10-01

    We present a novel one-dimensional coaxial architecture composed of silver nanowire (Ag NW) network core and nickel hydroxide (Ni(OH)2) shell for the realization of coaxial nanocomposite electrode materials for supercapacitors. Ag NWs are formed conductive networks via spray coating onto polyethylene terephthalate (PET) substrates and Ni(OH)2 is gradually electrodeposited onto the Ag NW network to fabricate core-shell electrodes for supercapacitors. Synergy of highly conductive Ag NWs and high capacitive Ni(OH)2 facilitate ion and electron transport, enhance electrochemical properties and result in a specific capacitance of 1165.2 F g-1 at a current density of 3 A g-1. After 3000 cycles, fabricated nanocomposite electrodes show 93% capacity retention. The rational design explored in this study points out the potential of nanowire based coaxial energy storage devices.

  1. Interface bond relaxation on the thermal conductivity of Si/Ge core-shell nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Weifeng; He, Yan; Ouyang, Gang, E-mail: gangouy@hunnu.edu.cn [Key Laboratory of Low-Dimensional Quantum Structures and Quantum Control of Ministry of Education, Synergetic Innovation Center for Quantum Effects and Applications(SICQEA), Hunan Normal University, Changsha 410081 (China); Sun, Changqing [School of Electrical & Electronic Engineering, Nanyang Technological University, Singapore 639798 (Singapore)

    2016-01-15

    The thermal conductivity of Si/Ge core-shell nanowires (CSNWs) is investigated on the basis of atomic-bond-relaxation consideration and continuum mechanics. An analytical model is developed to clarify the interface bond relaxation of Si/Ge CSNWs. It is found that the thermal conductivity of Si core can be modulated through covering with Ge epitaxial layers. The change of thermal conductivity in Si/Ge CSNWs should be attributed to the surface relaxation and interface mismatch between inner Si nanowire and outer Ge epitaxial layer. Our results are in well agreement with the experimental measurements and simulations, suggesting that the presented method provides a fundamental insight of the thermal conductivity of CSNWs from the atomistic origin.

  2. Interface bond relaxation on the thermal conductivity of Si/Ge core-shell nanowires

    Directory of Open Access Journals (Sweden)

    Weifeng Chen

    2016-01-01

    Full Text Available The thermal conductivity of Si/Ge core-shell nanowires (CSNWs is investigated on the basis of atomic-bond-relaxation consideration and continuum mechanics. An analytical model is developed to clarify the interface bond relaxation of Si/Ge CSNWs. It is found that the thermal conductivity of Si core can be modulated through covering with Ge epitaxial layers. The change of thermal conductivity in Si/Ge CSNWs should be attributed to the surface relaxation and interface mismatch between inner Si nanowire and outer Ge epitaxial layer. Our results are in well agreement with the experimental measurements and simulations, suggesting that the presented method provides a fundamental insight of the thermal conductivity of CSNWs from the atomistic origin.

  3. Spectroscopic characterization of magnetic Fe3O4@Au core shell nanoparticles

    Science.gov (United States)

    Fouad, Dina M.; El-Said, Waleed A.; Mohamed, Mona B.

    2015-04-01

    The magnetic nanoparticles iron oxide (Fe3O4) nanoparticles and iron oxide/gold core-shell (Fe3O4/Au) nanoparticles were synthesized and their catalytic photo-degradation activity towards malathion as example of organophosphorus pesticides were reported. Iron oxide (Fe3O4) magnetic nanoparticle was successfully prepared through co-precipitation method by the reduction of ferric chloride (FeCl3) using ascorbic acid. The morphology of the prepared nanoparticles was characterized by the TEM and XRD (X-ray diffraction) techniques. Degradation of 10 ppm of malathion in the presence of these nanoparticles under UV radiation was monitored using (HPLC) and UV-visible spectra. Fe3O4/Au nanoparticles showed higher efficiency in photo-degradation of malathion than Fe3O4 ones.

  4. Core/shell quantum dot based luminescent solar concentrators with reduced reabsorption and enhanced efficiency.

    Science.gov (United States)

    Coropceanu, Igor; Bawendi, Moungi G

    2014-07-09

    CdSe/CdS core/shell quantum dots (QDs) have been optimized toward luminescent solar concentration (LSC) applications. Systematically increasing the shell thickness continuously reduced reabsorption up to a factor of 45 for the thickest QDs studied (with ca. 14 monolayers of CdS) compared to the initial CdSe cores. Moreover, an improved synthetic method was developed that retains a high-fluorescence quantum yield, even for particles with the thickest shell volume, for which a quantum yield of 86% was measured in solution. These high quantum yield thick shell quantum dots were embedded in a polymer matrix, yielding highly transparent composites to serve as prototype LSCs, which exhibited an optical efficiency as high as 48%. A Monte Carlo simulation was developed to model LSC performance and to identify the major loss channels for LSCs incorporating the materials developed. The results of the simulation are in excellent agreement with the experimental data.

  5. Monodisperse core-shell particles composed of magnetite and dye-functionalized mesoporous silica

    Science.gov (United States)

    Eurov, D. A.; Kurdyukov, D. A.; Medvedev, A. V.; Kirilenko, D. A.; Yakovlev, D. R.; Golubev, V. G.

    2017-08-01

    Hybrid particles with a core-shell structure have been obtained in the form of monodisperse spherical mesoporous silica particles filled with magnetite and covered with a mesoporous silica shell functionalized with a luminescent dye. The particles have a small root-mean-square size deviation (at most 10%), possess a specific surface area and specific pore volume of up to 250 m2/g and 0.15 cm3/g, respectively, and exhibit visible luminescence peaked at a wavelength of 530 nm. The particles can be used in diagnostics of cancerous diseases, serving simultaneously for therapeutic (magnetic hyperthermia and targeted drug delivery) and diagnostic (contrast agent for magnetic-resonance tomography and luminescent marker) purposes.

  6. Infrared length scale and extrapolations for the no-core shell model

    CERN Document Server

    Wendt, K A; Papenbrock, T; Sääf, D

    2015-01-01

    We precisely determine the infrared (IR) length scale of the no-core shell model (NCSM). In the NCSM, the $A$-body Hilbert space is truncated by the total energy, and the IR length can be determined by equating the intrinsic kinetic energy of $A$ nucleons in the NCSM space to that of $A$ nucleons in a $3(A-1)$-dimensional hyper-radial well with a Dirichlet boundary condition for the hyper radius. We demonstrate that this procedure indeed yields a very precise IR length by performing large-scale NCSM calculations for $^{6}$Li. We apply our result and perform accurate IR extrapolations for bound states of $^{4}$He, $^{6}$He, $^{6}$Li, $^{7}$Li. We also attempt to extrapolate NCSM results for $^{10}$B and $^{16}$O with bare interactions from chiral effective field theory over tens of MeV.

  7. Double Detection of Mycotoxins Based on SERS Labels Embedded Ag@Au Core-Shell Nanoparticles.

    Science.gov (United States)

    Zhao, Yuan; Yang, Yaxin; Luo, Yaodong; Yang, Xuan; Li, Manli; Song, Qijun

    2015-10-01

    A sensitive surface-enhanced Raman scattering (SERS) signal dependent double detection of mycotoxins is achieved for the first time, without the aid of nucleic acid amplification strategies. SERS labels embedded Ag@Au core-shell (CS) nanoparticles (NPs) as novel SERS tags are successfully prepared through a galvanic replacement-free deposition. SERS tags produce stable and quantitative SERS signal, emerging from the plasmonic coupling at the junction of Ag core and Au shell. SERS tags engineered Raman aptasensors are developed for the double detection of ochratoxin A (OTA) and aflatoxin B1 (AFB1) in maize meal. The limits of detection (LODs) are as low as 0.006 ng/mL for OTA and 0.03 ng/mL for AFB1. The developed protocol can be extended to a large set of different SERS tags for the sensitive detection of multiple targets that possess different lengths of aptamers.

  8. Control of Microbial Growth in Alginate/Polydopamine Core/Shell Microbeads.

    Science.gov (United States)

    Kim, Beom Jin; Park, Taegyun; Park, So-Young; Han, Sang Woo; Lee, Hee-Seung; Kim, Yang-Gyun; Choi, Insung S

    2015-10-01

    Microbial microencapsulation not only protects microorganisms from harmful environments by physically isolating them from the outside media but also has the potential to tailor the release profile of the encapsulated cells. However, the microbial release has not yet been controlled tightly, leading to undesired detrimental exposure of microorganisms to the outside. In this work, we suggest a simple method for controlling the cell release by suppressing the microbial growth in the microbeads. Alginate microbeads, encapsulating yeast cells, were coated with ultrathin but robust polydopamine shells, and the resulting core/shell structures effectively reduced the growth rate, while maintaining the cell viability. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Entrapment of carbon dioxide with chitosan-based core-shell particles containing changeable cores.

    Science.gov (United States)

    Dong, Yanrui; Fu, Yinghao; Lin, Xia; Xiao, Congming

    2016-08-01

    Water-soluble chitosan-based core-shell particles that contained changeable cores were successfully applied to anchor carbon dioxide. The entrapment capacity of the particles for carbon dioxide (EC) depended on the cores. It was found that EC of the particles contained aqueous cores was higher than that of the beads with water-soluble chitosan gel cores, which was confirmed with thermogravimetric analysis. In addition, calcium ions and sodium hydroxide were introduced within the particles to examine their effect on the entrapment. EC of the particles was enhanced with sodium hydroxide when the cores were WSC gel. The incorporation of calcium ions was helpful for stabilizing carbon dioxide through the formation of calcium carbonate, which was verified with Fourier transform infrared spectra and scanning electron microscopy/energy-dispersive spectrometry. This phenomenon meant the role of calcium ions for fixating carbon dioxide was significant.

  10. Long Wavelength Plasmonic Absorption Enhancement in Silicon Using Optical Lithography Compatible Core-Shell-Type Nanowires

    Directory of Open Access Journals (Sweden)

    Mohammed Shahriar Sabuktagin

    2014-01-01

    Full Text Available Plasmonic properties of rectangular core-shell type nanowires embedded in thin film silicon solar cell structure were characterized using FDTD simulations. Plasmon resonance of these nanowires showed tunability from  nm. However this absorption was significantly smaller than the Ohmic loss in the silver shell due to very low near-bandgap absorption properties of silicon. Prospect of improving enhanced absorption in silicon to Ohmic loss ratio by utilizing dual capability of these nanowires in boosting impurity photovoltaic effect and efficient extraction of the photogenerated carriers was discussed. Our results indicate that high volume fabrication capacity of optical lithography techniques can be utilized for plasmonic absorption enhancement in thin film silicon solar cells over the entire long wavelength range of solar radiation.

  11. Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes.

    Science.gov (United States)

    Zhang, Xuemei; Wu, Xu; Centeno, Anthony; Ryan, Mary P; Alford, Neil M; Riley, D Jason; Xie, Fang

    2016-03-21

    Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures. The photocathode of Au@CZTS nanostructures exhibits enhanced optical absorption characteristics and improved incident photon-to-current efficiency (IPCE) performance. It is demonstrated that using this photocathode there is a significant increase of the power conversion efficiency (PCE) of a photoelectrochemical solar cell of 100% compared to using a CZTS without Au core. More importantly, the PCE of Au@CZTS photocathode improved by 15.8% compared to standard platinum (Pt) counter electrode. The increased efficiency is attributed to plasmon resonance energy transfer (PRET) between the Au nanoparticle core and the CZTS shell at wavelengths shorter than the localized surface plasmon resonance (LSPR) peak of the Au and the semiconductor bandgap.

  12. Platinum-tin oxide core-shell catalysts for efficient electro-oxidation of ethanol.

    Science.gov (United States)

    Du, Wenxin; Yang, Guangxing; Wong, Emily; Deskins, N Aaron; Frenkel, Anatoly I; Su, Dong; Teng, Xiaowei

    2014-08-06

    Platinum-tin (Pt/Sn) binary nanoparticles are active electrocatalysts for the ethanol oxidation reaction (EOR), but inactive for splitting the C-C bond of ethanol to CO2. Here we studied detailed structure properties of Pt/Sn catalysts for the EOR, especially CO2 generation in situ using a CO2 microelectrode. We found that composition and crystalline structure of the tin element played important roles in the CO2 generation: non-alloyed Pt46-(SnO2)54 core-shell particles demonstrated a strong capability for C-C bond breaking of ethanol than pure Pt and intermetallic Pt/Sn, showing 4.1 times higher CO2 peak partial pressure generated from EOR than commercial Pt/C.

  13. Self-assembled heterogeneous argon/neon core-shell clusters studied by photoelectron spectroscopy.

    Science.gov (United States)

    Lundwall, M; Pokapanich, W; Bergersen, H; Lindblad, A; Rander, T; Ohrwall, G; Tchaplyguine, M; Barth, S; Hergenhahn, U; Svensson, S; Björneholm, O

    2007-06-01

    Clusters formed by a coexpansion process of argon and neon have been studied using synchrotron radiation. Electrons from interatomic Coulombic decay as well as ultraviolet and x-ray photoelectron spectroscopy were used to determine the heterogeneous nature of the clusters and the cluster structure. Binary clusters of argon and neon produced by coexpansion are shown to exhibit a core-shell structure placing argon in the core and neon in the outer shells. Furthermore, the authors show that 2 ML of neon on the argon core is sufficient for neon valence band formation resembling the neon solid. For 1 ML of neon the authors observe a bandwidth narrowing to about half of the bulk value.

  14. INTERACTION OF ANTIGEN AND ANTIBODY ON CORE-SHELL POLYMERIC MICROSPHERES

    Institute of Scientific and Technical Information of China (English)

    Gang Li; Qing-bin Meng; Zhan-yong Li; Ying-li An; Xiao-xia Zhu

    2011-01-01

    Monodispersed microspheres with polystyrene as the core and poly(acrylamide-co-N-acryloxysuccinimide) as the shell were synthesized by a two-step surfactant-free emulsion copolymerization. The core-shell morphology of the microspheres was shown by scanning electron microscopy and transmission electron microscopy. Rabbit immunoglobulin G (as antigen) was covalently coupled onto the microspheres by the reaction between succinimide-activated ester groups on the shell of the microspheres and amino groups of the antigen molecules. The size of particles was characterized by dynamic light scattering technique and was found to vary upon bioconjugation and interaction with proteins. The binding process was shown to be specific to goat anti-rabbit immunoglobulin G (as antibody) and reversible upon the addition of free antigen into the system.

  15. Effective Interactions and Operators in Nuclei within the No-Core Shell Model

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, B; Navratil, P; Stetcu, I; Vary, J

    2005-09-14

    We review the application of effective operator formalism to the ab initio no core shell model (NCSM). For short-range operators, such as the nucleon-nucleon potential, the unitary-transformation method works extremely well at the two-body cluster approximation and good results are obtained for the binding energies and excitation spectra of light nuclei (A {<=} 16). However, for long-range operators, such as the radius or the quadrupole moment, performing this unitary transformation at the two-body cluster level, does not include the higher-order correlations needed to renormalize these long-range operators adequately. Usually, such correlations can be obtained either by increasing the order of the cluster approximation, or by increasing the model space. We will discuss the difficulties of these approaches as well as alternate possible solutions for including higher-order correlations in small model spaces.

  16. Effective Operators Within the Ab Initio No-Core Shell Model

    Energy Technology Data Exchange (ETDEWEB)

    Stetcu, I; Barrett, B R; Navratil, P; Vary, J P

    2004-11-30

    We implement an effective operator formalism for general one- and two-body operators, obtaining results consistent with the no-core shell model (NCSM) wave functions. The Argonne V8' nucleon-nucleon potential was used in order to obtain realistic wave functions for {sup 4}He, {sup 6}Li and {sup 12}C. In the NCSM formalism, we compute electromagnetic properties using the two-body cluster approximation for the effective operators and obtain results which are sensitive to the range of the bare operator. To illuminate the dependence on the range, we employ a Gaussian two-body operator of variable range, finding weak renormalization of long range operators (e.g., quadrupole) in a fixed model space. This is understood in terms of the two-body cluster approximation which accounts mainly for short-range correlations. Consequently, short range operators, such as the relative kinetic energy, will be well renormalized in the two-body cluster approximation.

  17. Core/Shell Conjugated Polymer/Quantum Dot Composite Nanofibers through Orthogonal Non-Covalent Interactions

    Directory of Open Access Journals (Sweden)

    Brad W. Watson

    2016-11-01

    Full Text Available Nanostructuring organic polymers and organic/inorganic hybrid materials and controlling blend morphologies at the molecular level are the prerequisites for modern electronic devices including biological sensors, light emitting diodes, memory devices and solar cells. To achieve all-around high performance, multiple organic and inorganic entities, each designed for specific functions, are commonly incorporated into a single device. Accurate arrangement of these components is a crucial goal in order to achieve the overall synergistic effects. We describe here a facile methodology of nanostructuring conjugated polymers and inorganic quantum dots into well-ordered core/shell composite nanofibers through cooperation of several orthogonal non-covalent interactions including conjugated polymer crystallization, block copolymer self-assembly and coordination interactions. Our methods provide precise control on the spatial arrangements among the various building blocks that are otherwise incompatible with one another, and should find applications in modern organic electronic devices such as solar cells.

  18. Thermoelectric properties of porous multi-walled carbon nanotube/polyaniline core/shell nanocomposites.

    Science.gov (United States)

    Zhang, Kun; Davis, Marauo; Qiu, Jingjing; Hope-Weeks, Louisa; Wang, Shiren

    2012-09-28

    Porous polyaniline (PANI)-coated multi-walled carbon nanotube (MWNT) core/shell nanohybrids were fabricated through in situ polymerization and subsequently assembled into macroscopic composites. N(2) adsorption/desorption analysis indicated that the volume of nanopores increased significantly, which could make a significant contribution to phonon scattering. Thermal annealing was also carried out to improve the Seebeck coefficient of the as-produced nanocomposites. The optimal sample showed electrical conductivity of 14.1 S cm(-1), a Seebeck coefficient of 79.8 μV K(-1) and thermal conductivity of 0.27 W mK(-1), resulting in a highest figure of merit (ZT) of 0.01 at a very low loading of MWNTs (thermoelectric performance of organic materials and also facilitate the application of organic materials in thermal energy harvesting or cooling.

  19. Electrically-responsive core-shell hybrid microfibers for controlled drug release and cell culture.

    Science.gov (United States)

    Chen, Chuntao; Chen, Xiao; Zhang, Heng; Zhang, Qi; Wang, Li; Li, Chenxi; Dai, Beibei; Yang, Jiazhi; Liu, Jian; Sun, Dongping

    2017-06-01

    It is an active research field to develop fiber-shaped smart materials for biomedical applications. Here we report the development of the multifunctional core-shell hybrid microfibers with excellent mechanical and electrical performance as a new smart biomaterial. The microfibers were synthesized using a combination of co-axial spinning with a microfluidic device and subsequent dip-coating, containing a hydrogel core of bacterial cellulose (BC) and a conductive polymer shell layer of poly(3,4-ethylenedioxythiophene) (PEDOT). The hybrid microfibers were featured with a well-controlled microscopic morphology, exhibiting enhanced mechanic properties. A model drug, diclofenac sodium, can be loaded in the core layer of the microfibers in situ during the process of synthesis. Our experiments suggested that the releasing behaviors of the drug molecules from the microfibers were enhanced by external electrical stimulation. Interestingly, we demonstrated an excellent biocompatibility and electroactivity of the hybrid microfibers for PC12 cell culture, thus promising a flexible template for the reconstruction of electrically-responsive tissues mimicking muscle fibers or nerve networks. Fiber-shaped biomaterials are useful in creating various functional objects from one dimensional to three-dimensional. The fabrication of microfibers with integrated physicochemical properties and bio-performance has drawn an increasing attention on researchers from chemical to biomedical. This study combined biocompatible bacterial cellulose with electroconductive poly(3,4-ethylenedioxythiophene) and further reduced them to a highly electroactive BC/PEDOT core-shell microfiber electrode for electrochemical actuator design. The result showed that the microfibers were well fabricated and the release of drugs from the microfibers was enhanced and could be controlled under electrical stimulation externally. Considering the excellent biocompatibility and electroactive toward PC12 cells, these

  20. Emergence of cluster structures and collectivity within a no-core shell-model framework

    Science.gov (United States)

    Launey, K. D.; Dreyfuss, A. C.; Draayer, J. P.; Dytrych, T.; Baker, R.

    2014-12-01

    An innovative symmetry-guided concept, which capitalizes on partial as well as exact symmetries that underpin the structure of nuclei, is discussed. Within this framework, ab initio applications of the theory to light nuclei reveal the origin of collective modes and the emergence a simple orderly pattern from first principles. This provides a strategy for determining the nature of bound states of nuclei in terms of a relatively small fraction of the complete shell-model space, which, in turn, can be used to explore ultra-large model spaces for a description of alpha-cluster and highly deformed structures together with the associated rotations. We find that by using only a fraction of the model space extended far beyond current no-core shell-model limits and a long-range interaction that respects the symmetries in play, the outcome reproduces characteristic features of the low-lying 0+ states in 12 C (including the elusive Hoyle state and its 2+ excitation) and agrees with ab initio results in smaller spaces. This is achieved by selecting those particle configurations and components of the interaction found to be foremost responsible for the primary physics governing clustering phenomena and large spatial deformation in the ground-state and Hoyle-state rotational bands of 12 C. For these states, we offer a novel perspective emerging out of no-core shell-model considerations, including a discussion of associated nuclear deformation, matter radii, and density distribution. The framework we find is also extensible to negative-parity states (e.g., the 3-1 state in 12C) and beyond, namely, to the low-lying 0+ states of 8Be as well as the ground-state rotational band of Ne, Mg, and Si isotopes. The findings inform key features of the nuclear interaction and point to a new insight into the formation of highly-organized simple patterns in nuclear dynamics.