WorldWideScience

Sample records for core-equipment hynic-bombesin-sn validacion

  1. Validation of the production process of core-equipment HYNIC-Bombesin-Sn; Validacion del proceso de produccion del nucleo-equipo HYNIC-Bombesina-Sn

    Energy Technology Data Exchange (ETDEWEB)

    Rubio C, N I [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2008-07-01

    The validation process is establishing documented evidence that provides a high degree of assurance that a specific process consistently will produce a product that will meet specifications and quality attributes preset and, therefore, ensures the efficiency and effectiveness of a product. The radiopharmaceutical {sup 99m}Tc-HYNlC-Bombesin is part of the gastrin-releasing peptide (GRP) analogues of bombesin that are radiolabelled with technetium 99 metastable for molecular images obtention. Is obtained from freeze-dry formulations kits (core- equipment)) and has reported a very high stability in human serum, specific binding to receptors and rapid internalization. Biodistribution data in mice showed rapid blood clearance with predominant renal excretion and specific binding to tissues with positive response to GRP receptors. According to biokinetics studies performed on patients with breast cancer, breast show a marked asymmetry with increased uptake in neoplastic breast in healthy women and the uptake of radiopharmaceuticals is symmetrical in both breasts. No reported adverse reactions. In this paper, the prospective validation core-equipment HYNlC-Bombesin-Sn, which was shown consistently that the product meets the specifications and quality, attributes to preset from the obtained from the diagnostic radiopharmaceutical third generation: {sup 99m}Tc-HYNlC-Bombesin. The process was successfully validated and thereby ensuring the efficiency and effectiveness of this agent as a preliminary diagnostic for approval to be marketed. (Author)

  2. Validation of the production process of core-equipment HYNIC-Bombesin-Sn

    International Nuclear Information System (INIS)

    Rubio C, N. I.

    2008-01-01

    The validation process is establishing documented evidence that provides a high degree of assurance that a specific process consistently will produce a product that will meet specifications and quality attributes preset and, therefore, ensures the efficiency and effectiveness of a product. The radiopharmaceutical 99m Tc-HYNlC-Bombesin is part of the gastrin-releasing peptide (GRP) analogues of bombesin that are radiolabelled with technetium 99 metastable for molecular images obtention. Is obtained from freeze-dry formulations kits (core- equipment)) and has reported a very high stability in human serum, specific binding to receptors and rapid internalization. Biodistribution data in mice showed rapid blood clearance with predominant renal excretion and specific binding to tissues with positive response to GRP receptors. According to biokinetics studies performed on patients with breast cancer, breast show a marked asymmetry with increased uptake in neoplastic breast in healthy women and the uptake of radiopharmaceuticals is symmetrical in both breasts. No reported adverse reactions. In this paper, the prospective validation core-equipment HYNlC-Bombesin-Sn, which was shown consistently that the product meets the specifications and quality, attributes to preset from the obtained from the diagnostic radiopharmaceutical third generation: 99m Tc-HYNlC-Bombesin. The process was successfully validated and thereby ensuring the efficiency and effectiveness of this agent as a preliminary diagnostic for approval to be marketed. (Author)

  3. HYACE - a novel autoclave coring equipment for systematic offshore gashydrate sampling

    Energy Technology Data Exchange (ETDEWEB)

    Amann, H.; Hohnberg, H.J.; Reinelt, R. [Technische Univ. Berlin (Germany). Inst. fuer Schiffs- und Meerestechnik, Fachgebiet Maritime Technik

    1997-12-31

    HYACE, the acronym for hydrate autoclave coring equipment system, is a research and development project sponsored by the European Union`s Marine Science and Technology Programme MAST. The project was to have started in the fourth quarter of 1997 and is to last 30 months. The main activities of the project will be in the development and prototype testing of an innovative down-hole controlled autoclave coring system. This system will be designed to sample marine sediments at extended down-hole conditions maintaining as many parameters constant as possible. In general terms, the main aim of the project is to contribute to systematic ground truthing of a necessarily ephemeral phenomenon of growing global significance: sampling and analysis of gas hydrates in their natural environment. (MSK)

  4. Validation of Hiriart equation to compute steam production by the lip pressure method; Validacion de la ecuacion de Hiriart para calculo de gasto de vapor por el metodo de presion de labio

    Energy Technology Data Exchange (ETDEWEB)

    Flores Armenta, Magaly [Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico)

    1996-09-01

    conocido, y el agua en un vertedor. Los resultados de la validacion demuestran la factibilidad de aplicar el metodo de presion de labio y utilizar una ecuacion sencilla de ajuste, que se presenta a continuacion, con un porcentaje de error menor del 1%, sin que influya notablemente la entalpia de produccion de los pozos geotermicos. Esta ecuacion es, en general: Q{nu} =(20642)(F*P*D{sup 2}/{radical}h-2000). Y para el caso del campo geotermico de Los Azufres: Q{nu}810*P*D{sup 2}

  5. VALIDACION DE ALSTROEMERIA CITRINA PHIL. (ALSTROEMERIACEAE)

    OpenAIRE

    Eyzaguirre Philippi, M. Teresa

    2008-01-01

    The collection oí Alstroemeria citrina Phil, in the mountains of Alicahue, located in the province of Petorca, Region of Valparaiso (November 2002), and north of Pedernales in the south of the Province of Choapa, Region of Coquimbo (November 2007), is described. The last location corresponds to the site where it was first described by Philippi in 1865. This plant had never been collected since.

  6. Validacion del inventario de autoeficacia para inteligencias multiples revisado (IAMI-R)

    OpenAIRE

    Edgardo R. Pérez; Marcos Cupani

    2008-01-01

    En este trabajo se describe el proceso de validación preliminar de una versión revisada del Inventario de Autoeficacia para Inteligencias Múltiples, el IAMI-R. Este instrumento fue construido con la finalidad de evaluar la autoeficacia de los adolescentes para realizar actividades académicas relacionadas con las inteligencias múltiples, en un contexto de desarrollo de carrera. El IAMI-R fue administrado a una muestra de estudiantes del nivel educativo polimodal en Argentina. Se re...

  7. Validation in life for dosimetric calculations in PET; Validacion de vida para calculos dosimetricos en PET

    Energy Technology Data Exchange (ETDEWEB)

    Ocampo ramos, J. C.; Petoussi-Henss, N.; Zankl, M.

    2015-07-01

    The LIFE program (VOXEL-PHANTOM-BASED SOFTWARE FOR INTERNAL DOSE ASSESSMENT) is developing new software for dose assessment in patients undergoing nuclear medicine examinations. This paper shows some of the validation and comparison tests that have been carried out for the case of the F-18 FDG. Unlike current programs (eg. OLINDA) using phantoms stylized size reference, the new developed software uses the pre calculated library Specific Absorption Fractions (SAF) of photons and electrons based on different anthropomorphic phantoms voxelized and the SAF new computational phantoms of the ICRP for photons, electrons, neutrons and alphas. In addition, the software uses the latest information from nuclear decay of the ICRP 107 (2008). The software is being widely put on trial and comparison with other methods of calculation available. (Author)

  8. Validation process of simulation model; Proceso de validacion de modelos de simulacion

    Energy Technology Data Exchange (ETDEWEB)

    San Isidro Pindado, M J

    1998-12-31

    It is presented a methodology on empirical about any detailed simulation model. This kind of validation it is always related with an experimental case. The empirical validation has a residual sense, because the conclusions are based on comparison between simulated outputs and experimental measurements. This methodology will guide us to detect the fails of the simulation model. Furthermore, it can be used a guide in the design of posteriori experiments. Three steps can be well differentiated: - Sensitivity analysis. It can be made with a DSA, differential sensitivity analysis, and with a MCSA, Monte-Carlo sensitivity analysis. - Looking the optimal domains of the input parameters. It has been developed a procedure based on the Monte-Carlo methods and Cluster techniques, to find the optimal domains of these parameters. - Residual analysis. This analysis has been made on the time domain on the frequency domain, it has been used the correlation analysis and spectral analysis. As application of this methodology, it is presented the validation carried out on a thermal simulation model on buildings, ESP studying the behavior of building components on a Test Cell of LECE of CIEMAT. (Author)

  9. Validation process of simulation model; Proceso de validacion de modelos de simulacion

    Energy Technology Data Exchange (ETDEWEB)

    San Isidro Pindado, M.J.

    1997-12-31

    It is presented a methodology on empirical about any detailed simulation model. This kind of validation it is always related with an experimental case. The empirical validation has a residual sense, because the conclusions are based on comparison between simulated outputs and experimental measurements. This methodology will guide us to detect the fails of the simulation model. Furthermore, it can be used a guide in the design of posteriori experiments. Three steps can be well differentiated: - Sensitivity analysis. It can be made with a DSA, differential sensitivity analysis, and with a MCSA, Monte-Carlo sensitivity analysis. - Looking the optimal domains of the input parameters. It has been developed a procedure based on the Monte-Carlo methods and Cluster techniques, to find the optimal domains of these parameters. - Residual analysis. This analysis has been made on the time domain on the frequency domain, it has been used the correlation analysis and spectral analysis. As application of this methodology, it is presented the validation carried out on a thermal simulation model on buildings, ESP studying the behavior of building components on a Test Cell of LECE of CIEMAT. (Author)

  10. Verification and software validation for nuclear instrumentation; Verificacion y validacion de software para instrumentacion nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Gaytan G, E. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Salgado G, J. R. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico); De Andrade O, E. [Universidad Federal de Rio de Janeiro, Caixa Postal 68509, 21945-970 Rio de Janeiro (Brazil); Ramirez G, A., E-mail: elvira.gaytan@inin.gob.mx [Comision Federal de Electricidad, Gerencia de Centrales Nucleoelectricas, Alto Lucero, Veracruz (Mexico)

    2014-10-15

    In this work is presented a Verification Methodology and Software Validation, to be applied in instruments of nuclear use with associate software. This methodology was developed under the auspices of IAEA, through the regional projects RLA4022 (ARCAL XCIX) and RLA1011 (RLA CXXIII), led by Mexico. In the first project three plans and three procedures were elaborated taking into consideration IEEE standards, and in the second project these documents were updated considering ISO and IEC standards. The developed methodology has been distributed to the participant countries of Latin America in the ARCAL projects and two related courses have been imparted with the participation of several countries, and participating institutions of Mexico like Instituto Nacional de Investigaciones Nucleares (ININ), Comision Federal de Electricidad (CFE) and Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS). In the ININ due to the necessity to work with Software Quality Guarantee in systems for the nuclear power plant of the CFE, a Software Quality Guarantee Plan and five procedures were developed in the year 2004, obtaining the qualification of the ININ for software development for the nuclear power plant of CFE. These first documents were developed taking like reference IEEE standards and regulator guides of NRC, being the first step for the development of the methodology. (Author)

  11. Importance of the validation of saving technologies of electric power; Importancia de la validacion de tecnologias ahorradoras de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Valer Negrete, Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad (Mexico)

    2003-07-01

    Within the Programs of Energy Saving it is fundamental the search and application of new technologies, with which this saving can be obtained, selected with base in their technical characteristics that allow to reduce to the consumptions and demands of power, without damaging the electric networks nor the transformers of the Comision Federal de Electricidad. It is important that the investments which are made count on attractive periods of capital recovery, in comparison with the useful life of the product, reason why the knowledge and price of the new technologies will be parameters to consider in an important manner, creating the need of conducting tests that verify the veracity of the information of the supplier, resulting in certain cases, the change of design of these technologies, so that thus they fulfill the engaged characteristics. This paper indicates the characteristics that the new saving technologies of electrical energy must fulfill and the tests and parameters to consider their evaluation. [Spanish] Dentro de los Programas de Ahorro de Energia es fundamental la busqueda y aplicacion de nuevas tecnologias, con las que se pueda obtener dicho ahorro, seleccionadas con base en sus caracteristicas tecnicas que permitan reducir los consumos y demandas de potencia, sin danar las redes ni transformadores de la Comision Federal de Electricidad. Es importante que las inversiones que se realicen cuenten con periodos de recuperacion de capital atractivos, comparados con la vida util del producto, por lo que el conocimiento y precio de las nuevas tecnologias seran parametros a considerar de manera importante, creandose la necesidad de realizar pruebas que verifiquen la veracidad de la informacion del proveedor, resultando en determinados casos, el cambio de diseno de dichas tecnologias, para que asi cumplan las caracteristicas prometidas. Este trabajo indica las caracteristicas que deben cumplir las nuevas tecnologias ahorradoras de energia electrica y las pruebas y parametros a considerar su evaluacion.

  12. Validacion de un Inventario Sobre La Percepcion de Los Padres de Superdotados Respecto a Los Servicios Educativos Disponibles Para Estos

    Science.gov (United States)

    Medina Munoz, Arlette Zamarie

    2013-01-01

    In Puerto Rico, there isn't a survey that collects the parent's perception of the available services for gifted children. Considering this, in this investigation an instrument was created and scientifically validated to collect the parents' perception of the educational services available. The instrument was validated using internal and external…

  13. Image Biomarkers and Precision Medicine: need for validation; Los biomarcadores de imagen y la Medicina de Precision: necesidad de validacion

    Energy Technology Data Exchange (ETDEWEB)

    Marti-Bonmati, L.; Alberich-Bayarri, A.; Garcia Castro, F.

    2016-08-01

    Personalized medicine aims to improve the diagnosis, classification and the best treatment for a particular patient. Today, radiologists are challenged to translate new biological discoveries, the different mechanisms of disease and advances in preclinical research, into a clinical reality through patients, images and their associated parameters. In this article we show how digital medical imaging and computational data processing extract numerous quantitative parameters from the obtained images as virtual biopsies. To be implemented in clinical practice, biomarkers should provide useful and relevant information, improving processes diagnostic, therapeutic and monitoring, for the benefit of patients. (Author)

  14. Diseño y validacion de un modelo de medicion del clima organizacional basado en percepciones y expectativas

    Directory of Open Access Journals (Sweden)

    Hernaldo Reinoso Alarcón

    2007-07-01

    Full Text Available El diagnóstico del clima organizacional es una herramienta de gestión organizacional que ha sido abordada tradicionalmente a partir de la medición de las percepciones que tienen los miembros de una organización respecto del ambiente en que desarrollan sus actividades laborales. En este estudio, se propone un Modelo de Diagnóstico del Clima Organizacional basado en medir, además de las percepciones, las expectativas que tienen los individuos respecto del ambiente en que se desenvuelven. En paralelo se desarrolla y valida un Instrumento de Medición, que estima los niveles de percepciones y de expectativas, para construir un indicador de Clima Organizacional a partir de las brechas entre ambos. El instrumento aporta información relevante para la toma de decisiones en gestión organizacional, ya que permite identificar las brechas percibidas por los miembros de la organización respecto del ambiente interno en que se desarrollan las actividades, permitiendo una focalización adecuada de las acciones de mejora en este aspecto. A partir del estudio de la teoría de clima organizacional clásica y la realización de entrevistas con sicólogos organizacionales, se adoptan las dimensiones del Clima Organizacional que aparecen con mayor frecuencia en los estudios, y en torno a éstas se construye un instrumento que mide las brechas existentes entre las percepciones y expectativas de los individuos para cada una de ellas. Se realiza una aplicación piloto, que permite realizar análisis de confiabilidad por medio del Alfa de Cronbach, ampliamente reconocido en la investigación en administración. Posteriormente, se realizan los análisis de validez de contenido, criterio y constructo, utilizando las herramientas estadísticas de correlación entre variables de Pearsons. Del instrumento original, compuesto por dos encuestas y un total de 48 ítems cada una, evaluados por una escala de Likert de 7 ítems, se deriva un instrumento que consta de dos encuestas de 27 ítems cada una, evaluadas en una escala de Likert de 5 puntos. Los resultados obtenidos permiten sostener que el instrumento desarrollado satisface las pruebas de confiabilidad y presenta correlaciones significativas, que reflejan su validez para medir las variables de percepciones y expectativas. Por otra parte, las mediciones realizadas demuestran que no existen correlaciones significativas entre las mediciones de percepciones y expectativas de un mismo individuo, lo que permite establecer que ambas condiciones se expresan como variable independientes. Con los resultados obtenidos de la aplicación del instrumento, se definen indicadores para el nivel de expectativas y para el nivel de percepciones, que en conjunto construyen el indicador de Clima Organizacional, que da cuenta de la dimensión de la brecha entre las percepciones que tienen los miembros respecto del ambiente al interior de la organización y sus expectativas respecto del mismo. The assessment of organizational climate is an organizational management tool that has been traditionally approached from the point of view of the perception that the members of an organization have regarding the environment where they work. This research presents a Work Climate Assessment Model based not only on the members’ perception but also on their expectations regarding their working place. At the same time, an Assessment Instrument is developed and validated. This Instrument appraises levels of perceptions and expectations, in order to build a Work Climate indicator, starting from the gap between the two of them. The instrument provides relevant information to the decision making process of organizational management, because it allows identifying the gaps perceived by the members of the organization regarding the internal environment where they develop their work, thus allowing an adequate emphasis for the betterment of this aspect. Upon studying the theory of classical work climate and after carrying out interviews with organizational psychologists, the Work Climate dimensions most frequently present in different researches are adopted, and around them an instrument is built to assess the existing gaps between the perceptions and expectations of the individuals for each one of them. A pilot application of the instrument is carried out, which allows a reliability analysis by means of Cronbach Alpha, widely known in the field of management research. Later on, content validation, criterion and construct analysis are run, making use of correlation statistics tools between Pearsons variables. From the original instrument, made up of two surveys and a total of 48 items each, evaluated by a Likert scale of 7 items, a second instrument is derived made up of two surveys of 27 items each, assessed by a Likert scale of 5 points. The results obtained allow us to argue that the developed instrument meets the reliability tests, and presents significant correlations that reflect its validity to assess variables of perception and expectations. On the other hand, the measurements carried out demonstrate that there are no significant correlations between the measurements of perception and expectations of the same individual, which allow us to conclude that both conditions express themselves as independent variables. With the results obtained from the application of the instrument, indicators for levels of expectation and perception are defined, which together constitute the Work Climate Indicator, which accounts for the size of the gap between the perception individuals have regarding the internal environment of the organizations and their expectations of it.  

  15. Validation of the AZTRAN 1.1 code with problems Benchmark of LWR reactors; Validacion del codigo AZTRAN 1.1 con problemas Benchmark de reactores LWR

    Energy Technology Data Exchange (ETDEWEB)

    Vallejo Q, J. A.; Bastida O, G. E.; Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Xolocostli M, J. V.; Gomez T, A. M., E-mail: amhed.jvq@gmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2016-09-15

    The AZTRAN module is a computational program that is part of the AZTLAN platform (Mexican modeling platform for the analysis and design of nuclear reactors) and that solves the neutron transport equation in 3-dimensional using the discrete ordinates method S{sub N}, steady state and Cartesian geometry. As part of the activities of Working Group 4 (users group) of the AZTLAN project, this work validates the AZTRAN code using the 2002 Yamamoto Benchmark for LWR reactors. For comparison, the commercial code CASMO-4 and the free code Serpent-2 are used; in addition, the results are compared with the data obtained from an article of the PHYSOR 2002 conference. The Benchmark consists of a fuel pin, two UO{sub 2} cells and two other of MOX cells; there is a problem of each cell for each type of reactor PWR and BWR. Although the AZTRAN code is at an early stage of development, the results obtained are encouraging and close to those reported with other internationally accepted codes and methodologies. (Author)

  16. Validation of new ceramic materials from tungsten mining wastes. Mechanical properties; Validacion de nuevos materiales ceramicos a partir de rocas de desecho de mineria. Propiedades mecanicas

    Energy Technology Data Exchange (ETDEWEB)

    Duran Suarez, J. A.; Montoya Herrera, J.; Silva, A. P.; Peralbo Cano, R.; Castro-Gomes, J. P.

    2014-07-01

    New ceramic materials obtained from tungsten mining wastes, from region of Beira Interior in Portugal, with no commercial use, responsible for landscape and environmental problems are presented. These preshaped new ceramic products, prepared in a wide thermal range (800 degree centigrade to 1300 degree centigrade) was evaluated by mechanical test, but also was characterized the starting raw materials: tungsten wastes mining and industrial kaolin. Results, which also include a mineralogical characterization of ceramic products and morphologic evaluation of neoformed by scanning electron microscopy, show firstly, the feasibility of converting a large number of these wastes in marketable ceramics. Thanks to the experimentation carried out, the ability to generate ceramic materials is emphasized, without the presence of mineral clay, due to the particular composition of these waste of mining with content of acid, neutral and basic oxides. (Author)

  17. Preliminary Validation and Verification Plan for CAREM Reactor Protection System; Modelo de Plan Preliminar de Validacion y Verificacion para el Sistema de Proteccion del Reactor CAREM

    Energy Technology Data Exchange (ETDEWEB)

    Fittipaldi, Ana; Felix, Maciel [Comision Nacional de Energia Atomica, Centro Atomico Bariloche (Argentina)

    2000-07-01

    The purpose of this paper, is to present a preliminary validation and verification plan for a particular architecture proposed for the CAREM reactor protection system with software modules (computer based system).These software modules can be either own design systems or systems based in commercial modules such as programmable logic controllers (PLC) redundant of last generation.During this study, it was seen that this plan can also be used as a validation and verification plan of commercial products (COTS, commercial off the shelf) and/or smart transmitters.The software life cycle proposed and its features are presented, and also the advantages of the preliminary validation and verification plan.

  18. Test and validation of the iterative code for the neutrons spectrometry and dosimetry: NSDUAZ; Prueba y validacion del codigo iterativo para la espectrometria y dosimetria de neutrones: NSDUAZ

    Energy Technology Data Exchange (ETDEWEB)

    Reyes H, A.; Ortiz R, J. M.; Reyes A, A.; Castaneda M, R.; Solis S, L. O.; Vega C, H. R., E-mail: alfredo_reyesh@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Ingenieria Electrica, Av. Lopez Velarde 801, Col. Centro, 98000 Zacatecas (Mexico)

    2014-08-15

    In this work was realized the test and validation of an iterative code for neutronic spectrometry known as Neutron Spectrometry and Dosimetry of the Universidad Autonoma de Zacatecas (NSDUAZ). This code was designed in a user graph interface, friendly and intuitive in the environment programming of LabVIEW using the iterative algorithm known as SPUNIT. The main characteristics of the program are: the automatic selection of the initial spectrum starting from the neutrons spectra catalog compiled by the International Atomic Energy Agency, the possibility to generate a report in HTML format that shows in graph and numeric way the neutrons flowing and calculates the ambient dose equivalent with base to this. To prove the designed code, the count rates of a spectrometer system of Bonner spheres were used with a detector of {sup 6}LiI(Eu) with 7 polyethylene spheres with diameter of 0, 2, 3, 5, 8, 10 and 12. The count rates measured with two neutron sources: {sup 252}Cf and {sup 239}PuBe were used to validate the code, the obtained results were compared against those obtained using the BUNKIUT code. We find that the reconstructed spectra present an error that is inside the limit reported in the literature that oscillates around 15%. Therefore, it was concluded that the designed code presents similar results to those techniques used at the present time. (Author)

  19. Project status of manufacturing of European toroidal coils ITER. Validation tests; Estado del proyecto de fabricacion de las bobinas toroidales european para el ITER. Ensayos de validacion

    Energy Technology Data Exchange (ETDEWEB)

    Pando, F.; Felipe, A.; Madorran, A.; Pallisa, J.; Dormicch, O.; Valle, N.; D' Urzo, C.; Marin, M.; Pesenti, P.; Lucas, J.; Moreno, N.; Bonito-Oliva, A.; Harrison, R.; Bellesia, B.; Cornelis, M.; Cornella, J.

    2015-07-01

    The toroidal field coils are the ITER magnets responsible for confining the plasma inside the vacuum vessel. The consortium formed by IBERDROLA Ingenieria y Construccion, ASG Superconductors y ELYTT Energy is the responsible for the supply of 10 coils that the european agency F4E has to supply for the ITER project. At present, the coils are been manufactured in La Spezia (Italy), after the qualification of all the manufacturing process and the sucessfull manufacturing of a full scale prototype. (Author)

  20. Accreditation of a system of extremity dosimetry: validation and uncertainty of method; Acreditacion de un sistema de dosimetria de extremidades: validacion e incertidumbre del metodo

    Energy Technology Data Exchange (ETDEWEB)

    Romero Gutierrez, A. M.; Rodriguez Jimenez, R.; Lopez Moyano, J. L.

    2013-07-01

    The authors' goal is to spread the practical experience gained during the accreditation process paying special attention to the process of method validation and estimation uncertainty of the dosimetry system. (Author)

  1. Validation of a new library of nuclear constants of the WIMS code; Validacion de una nueva biblioteca de constantes nucleares del Codigo WIMS

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F [Departamento de Experimentacion, Gerencia del Reactor, ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1991-10-15

    The objective of the present work is to reproduce the experimental results of the thermal reference problems (benchmarks) TRX-1, TRX-2 and BAPL-1 to BAPL-3 with the WIMS code. It was proceeded in two stages, the first one consisted on using the original library of the code, while in the second one, a library that only contains the present elements in the benchmarks: H{sup 1}, O{sup 16}, Al{sup 27}, U{sup 235} and U{sup 238} was generated. To generate the present nuclear data in the WIMS library, it was used the ENDF/B-IV database and the Data processing system of Nuclear Data NJOY, the library was generated using the FIXER code. (Author)

  2. Validation criteria of an internal dosimetry laboratory in vivo; Criterios para la validacion de un laboratorio de dosimetria interna in vivo

    Energy Technology Data Exchange (ETDEWEB)

    Alfaro L, M. de las M., E-mail: mercedes.alfaro@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    People working with radioactive materials, under certain circumstances (e.g. not using the proper protective equipment, an incident not covered, etc.) could be incorporated into the body. The radiation protection programs include direct measurement methods -in vivo- or indirect -in vitro- or both, to know that radioactive material is incorporated into the body. The monitoring measurements of internal contamination or (Radio-bioassay) are carried out with the purpose of determining the amount of radioactive material incorporated in the body; estimate the effective dose and committed dose; management administration of radiation protection; appropriate medical management; and to provide the data necessary for the legal requirements and the preservation of records. The measurement methods used in the monitoring of internal contamination must be validated by the combination of the following processes: calibration, using standards reference materials and/or simulators; execute systematic research, using control samples; and intercomparison between laboratories and performance tests. In this paper the validation criteria of an internal dosimetry laboratory in vivo are presented following the information provided by the standard ANSI N13-30-1996 and ISO/TEC 17025-2005 as are the criteria of facilities, staff training, interpretation of measurements, performance criteria for monitoring of internal contamination in vivo, results reporting and records retention. Thereby we achieve standardized quantitative performance criteria of truthfulness, accuracy and detection limit and a consensus on statistical definitions to establish the validation plan of a monitoring laboratory of internal contamination in vivo. (Author)

  3. Validating a mathematical model for inverse osmosis in an experimental flat membrane plant; Validacion de un modelo matematico para osmosis inversa con una planta piloto de membranas planas

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Gotor, A.; Salama, B.; Argudo, C.

    1999-05-01

    The different theories regarding inverse osmosis have given rise to mathematical models. This article describes an experiment using the model developed by Slater et al. based on the solution-diffusion theory. A DOW DANMARK SEPARATION SYSTEMS OI LAB-UNIT M 20 was employed together with a pair of type HR 98 PP flat membranes also from DOW DANMARK A/S SEPARATION SYSTEMS. The solution used to study the operational variables was KCI. The findings in regard to volumetric flows and permeate concentrations conformed to the expected trends. The model`s constants were also determined and their predictive value verified. (Author) 9 refs.

  4. Analysis of the gamma criteria validation of dosimetric for VMAT; Analisis de los criterios gamma de validacion de dosimetrias para VMAT

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Carrasco, M.; Marti Asenjo, J.; Torres Pozas, S.; Madan Rodriguez, C.; Luque Japon, L.; Godoy Cazorla, J.; Martin Olica, R.

    2013-07-01

    The simultaneous use of the variable elements of the patients, make it necessary to add a specific quality control for each treatment in addition to the quality controls newspapers of the machine. Likewise, the absence of an international or academic standard that a procedure for the validation of these treatments, justify the study of possible criteria for validation. Mannequins and computer programs used in this respect support a variety of analytical methods for the validation of the reproduction of the treatment. These methods of analysis are evaluated according to their sensitivity and specificity. (Author)

  5. Sediment Radiochronology Using Coastal {sup 210P}b: Model, Validation and Applications (Spanish Edition); Radiocronologia de Sedimentos Costeros Utilizando {sup 210}Pb: Modelos, Validacion y Aplicaciones

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Cabeza, Joan-Albert; Diaz-Asencio, Misael; Ruiz-Fernandez, Ana Carolina [eds.

    2012-07-01

    The natural resources of the Caribbean Sea provide approximately 60% of gross domestic product generated in the Caribbean region. The region is a tourist destination through which circulate 50% of cruise passengers worldwide. While small islands abound, most of the towns and resorts are on or near the coast. A significant fraction of household waste is untreated and have been identified as a major source of coastal pollution. Additionally, oil refineries contribute approximately 70% of the biological oxygen demand and over 80% of total industrial discharges of oil and grease in the region, and thus represent the industrial source of pollution in the Wider Caribbean important. In Johannesburg 2002 a Caribbean Initiative for Sustainable Development was proposed and passed. Its aim is the comprehensive management of coastal marine ecosystems through the implementation of regional action plans. In 2005 the heads of state of the Association of Caribbean States signed the Declaration of Panama, which asserts that the Caribbean Sea is a common heritage of the region and decisions were made to support the resolution of the United Nations Organization to 'Promote integrated management of the Caribbean Sea Area in the Context of Sustainable Development'. These initiatives were aimed at the adoption of concrete actions in different areas of sustainable development such as biodiversity, water resources and vulnerability, with attention to social and economic aspects. In 2006, the General Assembly of the United Nations adopted Resolution 'Towards sustainable development of the Caribbean Sea for present and future generations'. In 2007, the IAEA initiated a 4-year project on 'application of nuclear techniques in solving specific problems of integrated coastal zone management in the Caribbean', RLA/7/012. The aim of the project was to develop and enhance the capabilities to reduce human-caused degradation of coastal ecosystems of the Wider Caribbean region using nuclear techniques in support of integrated coastal zone. This project is aligned with the objectives of the IAEA in the environment, including 'facilitating the sustainable use of natural resources where isotopes can improve understanding of natural systems that allow, for example, prediction of future global trends from the past and overall assessment of resources'. The project involves Colombia, Costa Rica, Cuba, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Dominican Republic and Venezuela, with the support of the Centre for Energy, Environment and Technology (CIEMAT, Spain), the Institute Research for Development (IRD, France) and in collaboration with the Regional Coordinating Unit of the Caribbean of the United Nations Program for the Environment (UNEP-CAR/RCU). It is expected that the project results will improve the commitment of Member States and regional organizations in activities to protect the environment now and in the future. Through the regional laboratory training and a better understanding of coastal ecosystems from baseline studies and historical reconstruction of pollution levels, a strong network of laboratories with improved capabilities will be able to continue to contribute to the sustainable management of Caribbean Sea. Methodologies are being developed for monitoring and management. The results will be disseminated to the scientific community, policy makers and society, in addition to international organizations such as UNEP and the Association of Caribbean States. The objective of the results is to support integrated management of the coastal zone. One of the main methodologies of this project is the use of coastal sediments as records of environmental change, including pollution. Since most of the changes have occurred in the region during the twentieth century, the best chronology is provided by {sup 210}Pb, a natural radioactive element with a half-life of about 20 years, allowing sediments dating to about 100 years of seniority. Although there are many published papers on the use of this radionuclide as stopwatch sediment, IAEA welcomed the proposal made by the project partners that a consolidated text in Spanish would be very valuable to scientists and students from the region. For this purpose, the IAEA organized in March 2008 a meeting of experts at the Institute of Marine and Coastal Research (INVEMAR, Santa Marta, Colombia) and the end result of the meeting is this book about dating by {sup 210}Pb. The IAEA is grateful to the experts who participated in the workshop for their excellent work and commitment to the project. This publication was developed by IAEA experts to introduce Ibero-American scientists and Spanish-speaking students in the use of sediments as records of recent environmental changes. Whenever it has been possible emphasis was given on examples from Latin America. Since this book is not a comprehensive review, the reader is invited to consult a number of excellent publications in English. We hope this is an efficient way to disseminate the use of nuclear techniques for the study of the environment in the region and is in the near future translated and adapted to other languages. [Spanish] Los recursos naturales del mar Caribe proporcionan aproximadamente el 60% del Producto Interior Bruto generado en la region caribena. La region es un destino turistico a traves del que circulan un 50% de los pasajeros de cruceros de todo el mundo. Si bien abundan pequenas islas, la mayor parte de las ciudades y centros turisticos estan en o cerca de la costa. Una importante fraccion de los residuos domesticos sigue sin ser tratados y han sido identificados como una de las principales fuentes de contaminacion de las costas. Ademas, las refinerias de petroleo contribuyen con aproximadamente un 70% de la demanda biologica de oxigeno y mas del 80% de las descargas industriales totales de aceite y grasa en la region, por lo que representan la fuente industrial de contaminacion mas importante del Gran Caribe. En Johannesburgo 2002 se propuso y aprobo una Iniciativa Caribena para el Desarrollo Sostenible. Su objetivo es la gestion integral de ecosistemas marinos costeros a traves de la implementacion de planes de accion regionales. En 2005 los Jefes de Estado de la Asociacion de Estados del Caribe firmaron la Declaracion de Panama, la cual afirma que el Mar Caribe es un patrimonio comun de la region y se tomaron decisiones para apoyar la resolucion de la Organizacion de las Naciones Unidas para 'Promocionar una Gestion Integrada del Area del Mar del Caribe en el Contexto del Desarrollo Sostenible'. Estas iniciativas estaban dirigidas a la adopcion de acciones concretas en diferentes areas del desarrollo sostenible como la biodiversidad, recursos acuaticos y vulnerabilidad, prestando atencion a aspectos sociales y economicos. En 2006, la Asamblea General de las Naciones Unidas adopto la resolucion 'Hacia el desarrollo sostenible del Mar Caribe para las generaciones presentes y futuras'. En el ano 2007, la OIEA inicio un proyecto de 4 anos sobre la 'Aplicacion de tecnicas nucleares en la solucion de problemas especificos del manejo integrado de las zonas costeras en el Caribe', RLA/7/012. El objetivo del proyecto era desarrollar y mejorar las capacidades para reducir la degradacion por causas humanas de los ecosistemas costeros de la region del Gran Caribe utilizando tecnicas nucleares, en apoyo de la gestion integrada de la zona costera. Este proyecto esta alineado con los objetivos del OIEA en medio ambiente, en particular 'facilitando el uso sostenible de los recursos naturales donde los isotopos pueden mejorar el conocimiento de sistemas naturales que permita, por ejemplo, la prediccion de tendencias futuras globales a partir del pasado y la evaluacion global de recursos'. En el proyecto participan Colombia, Costa Rica, Cuba, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Republica Dominicana y Venezuela, con el apoyo del Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT, Espana), el Instituto de Investigacion para el Desarrollo (IRD, Francia) y en colaboracion con la Unidad de Coordinacion Regional del Caribe del Programa de las Naciones Unidas para el Medio Ambiente (PNUMA-CAR/RCU). Se espera que los resultados del proyecto mejoren el compromiso de los Estados Miembros y organizaciones regionales en actividades para la proteccion del ambiente ahora y en el futuro. A traves de la formacion en laboratorios regionales y el mejor conocimiento de los ecosistemas costeros a partir de estudios de base y de reconstruccion historica de los niveles de contaminacion, una fuerte red de laboratorios con mejores capacidades sera capaz de continuar contribuyendo a la gestion sostenible del mar Caribe. Se estan desarrollando metodologias para el monitoreo y la gestion. Los resultados seran diseminados a la comunidad cientifica, los tomadores de decisiones y la sociedad, ademas de organizaciones internacionales como UNEP y la Asociacion de Estados Caribenos. El objetivo de los resultados es apoyar la gestion integrada de la zona costera. Una de las metodologias principales de este proyecto es la utilizacion de sedimentos costeros como registros de cambios ambientales, incluyendo la contaminacion. Dado que la mayor parte de los cambios en la region han ocurrido durante el siglo XX, la mejor cronologia es la proporcionada por el {sup 210}Pb, un elemento radiactivo natural con un periodo de semidesintegracion de aproximadamente 20 anos, que permite fechar sedimentos de hasta unos 100 anos de antigueedad. Aunque hay muchos trabajos publicados sobre el uso de este radionuclido como cronometro de sedimentos, el OIEA valoro positivamente la propuesta hecha por las contrapartes del proyecto de que un texto de sintesis en espanol seria muy valioso para cientificos y estudiantes de la region. Con este objetivo, el OIEA organizo en Marzo de 2008 una reunion de expertos en el Instituto de Investigaciones Marinas y Costeras (INVEMAR, Santa Marta, Colombia) y el resultado final de la reunion es el presente libro sobre fechado mediante {sup 210}Pb. El OIEA esta muy agradecido a los expertos que participaron en el taller por su excelente trabajo y su compromiso con el proyecto. Esta publicacion del OIEA fue desarrollada por expertos ibero-americanos para introducir a los cientificos y estudiantes de lengua hispana en el uso de los sedimentos como registros de cambios ambientales recientes. Siempre que ha sido posible se ha dado enfasis a ejemplos procedentes de Iberoamerica. Dado que este libro no es una revision exhaustiva, el lector es invitado a consultar un conjunto de excelentes publicaciones en ingles. Esperamos que esta sea una forma eficiente para diseminar el uso de de tecnicas nucleares para el estudio del medio ambiente en la region y que sea en el futuro proximo traducido y adaptado a otras lenguas.

  6. Validation of the entire 2D array Octavius by radiochromic films; Validacion del conjunto Octavius 2D array mediante peliculas radiocromicas

    Energy Technology Data Exchange (ETDEWEB)

    Iriondo Igerabide, U.; Former Forner, A.; Otal Palacin, A.; Martin Albina, M. L.; Lozares Cordero, S.; Maneru Camara, F.; Pellejero Pellejero, S.; Miquelez Alonso, S.; Soto Prados, P. M.; Rubio Arroniz, A.

    2011-07-01

    We have validated the 2D-array Octavius set for verification of IMRT plans complete, radiating with the same angles of incidence in the patient's actual plan. This has been taken as reference measurements with radiochromic films, since they are almost isotropic response, higher resolution and we already have experience with them.

  7. Validation of a method to determine methylmercury in fish tissues using gas chromatography; Validacion de un metodo para determinar metilmercurio en tejido de pescado por cromatografia de gases

    Energy Technology Data Exchange (ETDEWEB)

    Vega Bolannos, Luisa O; Arias Verdes, Jose A; Beltran Llerandi, Gilberto; Castro Diaz, Odalys; Moreno Tellez, Olga L [Instituto de Nutricion e Higiene de los Alimentos, La Habana (Cuba)

    2000-07-01

    We validated a method to determine methylmercury in fish tissues using gas chromatography with an electron capture detector as described by the Association of Official Analytical Chemist (AOAC) International. The linear curve range was 0.02 to 1 g/ml and linear correlation coefficient was 0.9979. A 1 mg/kg methylmercury-contaminated fish sample was analyzed 20 times to determine repeatability of the method. The quantification limit was 0.16 mg/kg and detection limit was 0.06 ppm. Fish samples contaminated with 0.2 to 10 mg/kg methylmercury showed recovery indexes from 94.66 to 108.8%.

  8. Validacion de un instrumento para valorar la percepcion del aprendizaje y el nivel de diversión del alumno en educación física. El semáforo

    OpenAIRE

    Palao Andrés, José Manuel; Hernández Hernández, Elena

    2012-01-01

    El objetivo del presente trabajo fue validar un instrumento de evaluación de la percepción del aprendizaje y el nivel de diversión de los alumnos en clase de educación física (“el semáforo”). El instrumento “el semáforo” constaba de dos cuestiones cerradas con tres posibles respuestas (¿Cuánto crees que has aprendido / te has divertido en esta sesión?), relacionadas con la percepción que el alumno tiene sobre el nivel de aprendizaje, y el nivel de diversión alcanzado durante...

  9. Validation of the technique of kinetic fosforimetria induced by laser for the determination of the concentration of uranium in urine; Validacion de la tecnica de fosforimetria cinetica inducida por laser para la determinacion de la concentracion de uranio en orina

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, C.; Sierra, I.; Benito, P.; Lopez, C.

    2013-07-01

    This paper describes the methodology used to conduct the validation of the method of determination of uranium using the technique of Kinetic Phosphorescence Analyser (KPA) The technical requirements of the standard 17025 stresses the need for validation samples KPA urine of workers exposed to risk of internal contamination. (Author)

  10. Validation of the thermal balance of Laguna Verde turbine under conditions of extended power increase; Validacion del balance termico de turbina de Laguna Verde en condiciones de aumento de potencia extendido

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda G, M. A.; Cruz B, H. J.; Mercado V, J. J.; Cardenas J, J. B.; Garcia de la C, F. M., E-mail: miguel.castaneda01@cfe.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Carretera Cardel-Nautla Km 42.5, Alto Lucero, Veracruz (Mexico)

    2012-10-15

    The present work is a continuation of the task: Modeling of the vapor cycle of Laguna Verde with the PEPSE code to conditions of thermal power licensed at present (2027 MWt) in which the modeling of the vapor cycle of the nuclear power plant of Laguna Verde was realized with PEPSE code (Performance Evaluation of Power System Efficiencies). Once reached the conditions of nominal operation of extended power increase, operating both units to 2371 MWt; after the tests phase of starting-up and operation is necessary to carry out a verification of the proposed design of the vapor cycle for the new operation conditions. All this, having in consideration that the vapor cycle designer only knows the detail of the prospective performance of the main turbine, for all the other components (for example pumps, heat inter changers, valves, reactor, humidity separators and re-heaters, condensers, etc.) makes generic suppositions based on engineering judgment. This way carries out the calculations of thermal balance to determine the guaranteed gross power. The purpose of the present work is to comment the detail of the validation carried out of the specific thermal balance (thermal kit) of the nuclear power plant, making use of the design characteristics of the different components that conform the vapor cycle. (Author)

  11. Validation of a gating technique for radiotherapy treatment of injuries affected by respiratory motion; Validacion de una atecnica de gating para el tratamiento con radioterapia externa de lesiones afectadas por el movimiento respiratorio

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Ortega, J.; Castro Tejero, P.

    2011-07-01

    The use of gating techniques for the treatment of lesions that are involved respiratory motion may bring an increase in the dose administered. tumors and decreased the dose to adjacent healthy organs. In the study presented shows the steps taken to validate the respiratory gating technique using the RPM system (Real-time Position Management) from Varian. (Author)

  12. Validation of the plan of handling of hospital accustomed to waste of the Costa Rica Box of the Public Health; Validacion del plan de manejo de desechos solidos hospitalarios de la Caja Costarricense del Seguro Social

    Energy Technology Data Exchange (ETDEWEB)

    Salazar Monge, F J

    1999-07-01

    The handling that is given at the moment to the hospital solid waste in Costa Rica is considered inadequate, due to the lack of the personnel's of cleaning training, segregation, vehicles of transport and recipients, signaling, team of personal protection, schedule and gathering route and recycle. This situation represents a serious danger for the population's health and the since environment is exposed infectious agents toxic substances and even radioactive products that are generated in the residuals of the centers of health. In this work they intend improvements to the system of handling of solid waste of the hospital Calderon Guardia, and you evaluates each one of the points mentioned previously. A revision was made about the properties, the quality and the quantity of the produced solid waste and an I diagnose of the current situation in this center of health. The proposed improvements are based on the regional program of hospital solid waste, agreement ALA91/33 (this it was elaborated in 1997 by a cooperation initiative between the European Union and the Governments from Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama) and the Norms for the Handling of dangerous Solid Waste in Establishments of Health (elaborated by the Costa Rican Box of the Public Health) their advantages and disadvantages are also exposed and he/she is carried out a comparative analysis among the handling plan proposed in these documents and the one that is used at the moment in the Calderon Guardia hospital. Some of the detected problems are: it lacks of team of personal protection, the appropriate recipients are not used, storage of waste inside the hospital, the vehicles used in the internal transport are not appropriate, bad organization of the storing center, among others. [Spanish] El manejo que se da actualmente a los desechos solidos hospitalarios en Costa Rica se considera inadecuado, debido a la falta de capacitacion del personal de limpieza, segregacion, vehiculos de transporte y recipientes, equipo de proteccion personal, horario y ruta de recoleccion y recicle. Esta situacion representa un grave peligro para la salud de la poblacion y el medio ambiente pues se le expone a agentes infecciosos sustancias toxicas e incluso productos radiactivos que se generan en los residuos de los centros de salud. En este trabajo se proponen mejoras al sistema de manejo de desechos solidos del hospital Calderon Guardia, y se evaluo cada uno de los puntos mencinados anteriormente. Se hizo una revision acerca de las propiedades, la calidad y la cantidad de los desechos solidos producidos y un diagnostico de la situacion actual en este centro de salud. Las mejoras propuestas se basan en el prograna regional de desechos solidos hospitalarios, convenio ALA 91/33 (este fue elaborado en 1997 por una iniciativa de cooperacion entre la Union Europea y los Gobiernos de Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua y Panama) y las Normas para el Manejo de Desechos Solidos Peligrosos en Establecimientos de Salud (elaborado por la Caja Costarricense del Seguro Social). Ademas se exponen sus ventajas y desventajas y se realiza un analisis comparativo entre el plan de manejo propuesto en estos documentos y el que se utiliza actualmente en el hospital Calderon Guardia. Algunos de los problemas detectados son: falta de equipo de proteccion personal, no se utilizan los recipientes adecuados, almacenamiento de desechos dentro del hospital, los vehiculos utilizados en el transporte interno no son los mas adecuados, mala organizacion del centro de acopio, entre otros. (author)

  13. Dosimetric validation of planning system Eclipse 10 in partial breast irradiation treatments with IMRT; Validacion dosimetrica del sistema de planeacion Eclipse 10 en tratamientos de irradiacion parcial de mama con IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez T, J. J.; Gutierrez M, J. G.; Ortiz A, C. S.; Chagoya G, A.; Gutierrez C, J. G., E-mail: jvelaesfm@gmail.com [Centro Medico Nacional Siglo XXI, Hospital de Oncologia, Departamentos de Fisica Medica y Radioterapia, Av. Cuauhtemoc 330, 03020 Mexico D. F. (Mexico)

    2015-10-15

    Partial breast irradiation is a new type of external radiation therapy to treat breast cancer in early clinical stages. Consist of administering to the channel surgical high doses of radiation in few treatment sessions. In this paper the dose calculations of the planning system Eclipse version 10 for a treatment of partial breast irradiation with X-rays beams (6 MV) intensity modulated were compared against the measurements made with OSL dosimeters and radio-chromic dye film. An anthropomorphic mannequin was used in which OSL dosimeters were collocated near the surface, an inside the radio-chromic dye film one plate; with this latest one dimensional dose distribution was measured. Previously dosimeters were calibrated irradiating them with a beam of X-rays 6 MV under the conditions specified in the IAEA-398 protocol. The OSL dosimeters were read in the Micro star Landauer equipment, the radio-chromic dye films were read with a scanner Epson 10000-Xl and analyzed with FilmCal and PTW Verisoft programs. The differences between measured and calculated dose were as follows: 3.6±1% for the OSL dosimeter and 96.3±1% of the analyzed points approved the gamma index criterion (3%, 3m m) when comparing the matrices of calculated dose and measured with the radio-chromic dye film. These results confirm the good dosimetric performance of planning system used under specific conditions used in the partial breast irradiation technique. (Author)

  14. Validation of radiological efficiency model applied for the crops/soils contaminated by radiocaesium; Validacion de un modelo de eficiencia radiologica de contramedidas aplicables a suelos agricolas contaminados por radiocesio

    Energy Technology Data Exchange (ETDEWEB)

    Montero, M.; Vazquez, C.; Moraleda, M.; Claver, F. [Ciemat. Madrid (Spain)

    2000-07-01

    The differences shown in the radiological efficiency applying the same agrochemical interventions on a range of contaminated agricultural scenarios by long-live radionuclides have conducted the radioecological studies to quantify the influence of local characteristics on the soil-to-plant transference. In the framework of the Decision Support Systems for post-accidental environmental restoration, a semi-mechanistic approach has been developed to estimate the soil-to-plant transfer factor from the major properties underlying the bioavailability of radiocaesium in soils and the absorption capacity by the crop. The model describes, for each soil texture class, the effects of time and K status on the transference of radiocaesium to plants. The approach lets to estimate the actual and the available minimum transference and to calculate the optimum amendment warranting the maximum radiological efficiency on an specific soil-crop combination. The parameterization and validation of the model from a database providing information about experimental transference studies for a collection of soil-crop combinations are shown. (Author) 4 refs.

  15. Validation of a methodology for the study of generation cost of electric power for nuclear power plants; Validacion de una metodologia para el estudio de costos de generacion de electricidad de plantas nucleares de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Ortega C, R.F.; Martin del Campo M, C. [Facultad de Ingenieria, UNAM, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Paseo Cuauhnahuac 8532, 62550, Jiutepec, Morelos (Mexico)]. E-mail: rfortega@mexis.com

    2004-07-01

    It was developed a model for the calculation of costs of electric generation of nuclear plants. The developed pattern was validated with the one used by the United States Council for Energy Awareness (USCEA) and the Electric Power Research Institute (EPRI), in studies of comparison of alternatives for electric generation of nuclear plants and fossil plants with base of gas and of coal in the United States described in the guides calls Technical Assessment Guides of EPRI. They are mentioned in qualitative form some changes in the technology of nucleo electric generation that could be included in the annual publication of Costs and Parameters of Reference for the Formulation of Projects of Investment in the Electric Sector of the Federal Commission of Electricity. These changes are in relation to the advances in the technology, in the licensing, in the construction and in the operation of the reactors called advanced as the A BWR built recently in Japan. (Author)

  16. Validation the quantification of beta emitters activity in urine by scintillation spectrometry in the liquid phase; Validacion de la cuantificacion de actividad de emisores beta en orina mediante espectrometria de centelleo en fase liquida

    Energy Technology Data Exchange (ETDEWEB)

    Sierra, I.; Hernandez, C.; Benito, P.; Lopez, C.

    2013-07-01

    In this paper the methodology used in the validation of the technique for quantifying activity of some beta emitters in urine ({sup 3}H, {sup 1}4C, {sup 3}5S, {sup 3}2P and {sup 9}0Sr) by scintillation spectrometry Liquid Phase (Liquid Scintillation Counting, LSC) is described in bio elimination Laboratory Service CIEMAT Radiation Dosimetry accredited since last year for carrying out assays measure radiation dose based on ISO forth above. (Author)

  17. General criteria for validation of dosimetry methods in the context of a quality system ISO / IEC 17025; Criterios generales sobre validacion de metodos de dosimetria en el marco de un sistema de calidad ISO/IEC 17025

    Energy Technology Data Exchange (ETDEWEB)

    Martin Garcia, R.; Navarro Bravo, T.

    2011-07-01

    The accreditation of a testing laboratory in accordance with ISO / IEC 17025 recognizes the technical competence of a laboratory to perform certain tests. One of the requirements of that rule states that laboratories must demonstrate that the methods used are valid and appropriate for the intended use and customer needs. This demonstration is accomplished through the process of validation of methods, defined in the rule it self as {sup c}onfirmation by examination and provision of objective evidence that the requirements for a particular purpose{sup .} The process of validating a test method should be well planned and documented, including the requirements under the applicable rules and criteria established by the laboratory to comply with these requirements.

  18. Validation of the alpha spectrometry bio elimination laboratory for measuring activity in excreta; Validacion de la tecnica de espectrometria alfa por el laboratorio de bioeliminacion para la medida de actividad en excretas

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Gonzalez, C.; Sierra Bercero, I.; Benito Alonso, P.; Lopez Zarza, C.

    2011-07-01

    the Laboratory Radiation Dosimetry Service of the CIEMAT is undergoing a process of adapting its working methods and quality assurance to management and technical requirements established in ISO / IEC 17025:2005 with to obtain accreditation shortly ENAC.

  19. OECD/NEA International Benchmark exercises: Validation of CFD codes applied nuclear industry; OECD/NEA internatiion Benchmark exercices: La validacion de los codigos CFD aplicados a la industria nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Pena-Monferrer, C.; Miquel veyrat, A.; Munoz-Cobo, J. L.; Chiva Vicent, S.

    2016-08-01

    In the recent years, due, among others, the slowing down of the nuclear industry, investment in the development and validation of CFD codes, applied specifically to the problems of the nuclear industry has been seriously hampered. Thus the International Benchmark Exercise (IBE) sponsored by the OECD/NEA have been fundamental to analyze the use of CFD codes in the nuclear industry, because although these codes are mature in many fields, still exist doubts about them in critical aspects of thermohydraulic calculations, even in single-phase scenarios. The Polytechnic University of Valencia (UPV) and the Universitat Jaume I (UJI), sponsored by the Nuclear Safety Council (CSN), have actively participated in all benchmark's proposed by NEA, as in the expert meetings,. In this paper, a summary of participation in the various IBE will be held, describing the benchmark itself, the CFD model created for it, and the main conclusions. (Author)

  20. Design of a test-bench to validate a model of a thermal window design; Diseno de un banco de ensayos para la validacion de un modelo de diseno termico de ventanas

    Energy Technology Data Exchange (ETDEWEB)

    Saavedra O, Claudio; Fissore Sch, Adelqui; Mottard, Jean-Michel [Universidad de Concepcion (Chile). Facultad de Ingenieria. Dept. de Ingenieria Mecanica]. E-mail: clsaaved @udec.cl; afissore@udec.cl

    2000-07-01

    Paper presents the design of a test-bench and instrumentation to validate a window thermal mathematical model. The test-bench simulate the thermal performance of a office with a only one wall in directly contact with outdoors, where a single glass window is mounted. To obtain a similar heat transfer relation as the real building, the chamber has been designed and manufactured with an inner and an outer envelope, and with an air spacing maintaining at the same temperature that the test chamber. To change the window size, the test-bench is equipped with a single modifiable outer wall. Instrumentation and methods of measurement for solar radiation, infra red outdoor radiation, indoor and outdoor air temperatures, wind velocity, heat transfer, air ventilating flow and temperature, wall temperatures, etc. are specified. (author)

  1. Validation of methods to measure uranium isotopes using magnetic sector mass spectrometry with inductively coupled plasma source; Validacion de metodos para medir isotopos de uranio usando espectrometria de masas de sector magnetico con fuente de plasma acoplado inductivamente

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, H. [Universidad del Centro de Mexico, Capitan Caldera 75, Col. Tequixquiapan, 78250 San Luis Potosi, SLP (Mexico); Rios L, M. J. [Universidad Autonoma de San Luis Potosi, Facultad de Enfermeria y Nutricion, Unidad de Posgrado, Av. Nino Artillero 130, 78210 San Luis Potosi, SLP (Mexico); Romero G, E. T., E-mail: hector.hernandez520@gmail.com [ININ, Departamento de Quimica, Laboratorio Forense Nuclear, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2017-10-15

    The mass spectrometry technique with inductively coupled plasma source (Icp-Ms) has been widely used to measure isotopic ratios of elements toxic to human health. Reason for which, in this work several measurement methods for the analysis of uranium isotopes in different matrices were implemented using magnetic sector mass spectrometry with inductively coupled plasma source (Icp-SFMS). Groundwater, sediment, soil and urine were the matrices analyzed, which were supplied by intercomparison tests conducted by the IAEA and Association for the Promotion of Quality Control of Medical Biology Analysis in Radio-toxicology. The procedures used in the treatment of soil, sediment and water samples were based on US EPA methods. In the case of the urine sample, the preparation was rapid (1:20 dilution). The average of the results obtained in yield of each matrix was 94, 71, 72 and 78% for water, urine, soil and sediment respectively. In addition, the precision in terms of standard relative deviation was less than 5% and the accuracy was less than 4%. In conclusion, the Icp-SFMS is a very sensitive technique for measuring isotopes of U in different matrices. However, careful tuning is necessary, especially in the mass regions of interest 234, 235 and 238 if an external quantification is considered using natural U solutions. (Author)

  2. Validation of quality control tests of a multi leaf collimator using electronic portal image devices and commercial software; Validacion de unas pruebas de control de calidad del colimador multilamina utilizando dispositivos electronicos de imagen portal y una aplicacion comercial

    Energy Technology Data Exchange (ETDEWEB)

    Latorre-Musoll, A.; Jornet Sala, N.; Carrasco de Fez, P.; Edualdo Puell, T.; Ruiz Martinez, A.; Ribas Morales, M.

    2013-07-01

    We describe a daily quality control procedure of the multi leaf collimator (MLC) based on electronic portal image devices and commercial software. We designed tests that compare portal images of a set of static and dynamic MLC configurations to a set of reference images using commercial portal dosimetry software. Reference images were acquired using the same set of MLC configurations after the calibration of the MLC. To assess the sensitivity to detect MLC under performances, we modified the MLC configurations by inserting a range of leaf position and speed errors. Distance measurements on portal images correlated with leaf position errors down to 0.1 mm in static MLC configurations. Dose differences between portal images correlated both with speed errors down to 0.5% of the nominal leaf velocities and with leaf position errors down to 0.1 mm in dynamic MLC configurations. The proposed quality control procedure can assess static and dynamic MLC configurations with high sensitivity and reliability. (Author)

  3. Validation of the implementation of IMRT with three dosimetric methods of independent verification; Validacion de la puesta en marcha de la IMRT con tres metodos dosimetricos de verificacion independientes

    Energy Technology Data Exchange (ETDEWEB)

    Tortosa Oliver, R. A.; Chinillach ferrando, N.; Alonso Arrizabalaga, S.; Campayo Esteban, J. M.; Morales Marco, J. C.; Soler Catalan, P.; Andreu Martinez, F. J.

    2013-07-01

    The TG119 is a simple and clear framework to verify the implementation of IMRT technique in a radiotherapy service. Verifications of this document recommended tests conducted with the three dosimetric methods listed above, allow to affirm that our Center is within the margins of tolerance considered suitable in the TG119 for the clinical implementation of IMRT. (Author)

  4. Validation of the inspections with ultrasound of the welds of the reactor of ITER vacuum vessel; Validacion de las inspecciones con ultrasonidos de las soldaduras de la Vasija de Vacio del reactor del ITER

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, A.; Fernandez, F.; Perez, C.; Sillero, J. A.

    2013-07-01

    The ITER fusion reactor vacuum vessel has thousands of welding austenitic with shapes and different manufacturing processes. The RCC-MR code, which is that applied to the manufacture of the fusion reactor, requires a volumetric test all of them. This test should be mainly by x-rays and welds where it was not possible to use this method, ultrasonic.09-06.

  5. Development and validation of a model TRIGA Mark III reactor with code MCNP5; Desarrollo y validacion de un modelo del reactor Triga Mark III con el codigo MCNP5

    Energy Technology Data Exchange (ETDEWEB)

    Galicia A, J.; Francois L, J. L. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Aguilar H, F., E-mail: blink19871@hotmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    The main purpose of this paper is to obtain a model of the reactor core TRIGA Mark III that accurately represents the real operating conditions to 1 M Wth, using the Monte Carlo code MCNP5. To provide a more detailed analysis, different models of the reactor core were realized by simulating the control rods extracted and inserted in conditions in cold (293 K) also including an analysis for shutdown margin, so that satisfied the Operation Technical Specifications. The position they must have the control rods to reach a power equal to 1 M Wth, were obtained from practice entitled Operation in Manual Mode performed at Instituto Nacional de Investigaciones Nucleares (ININ). Later, the behavior of the K{sub eff} was analyzed considering different temperatures in the fuel elements, achieving calculate subsequently the values that best represent the actual reactor operation. Finally, the calculations in the developed model for to obtain the distribution of average flow of thermal, epithermal and fast neutrons in the six new experimental facilities are presented. (Author)

  6. Validation and calculation of uncertainties of the method of determination of creatinine in urine in internal dosimetry; Validacion y calculo de incertidumbres del metodo de determinacion de creatinina en orina en dosimetria interna

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Barcedo, I.; Hernandez Gonzalez, C.; Benito Alonso, P.; Lopez Zarza, C.

    2011-07-01

    This paper describes the methodology used to conduct the validation of the quantification technique of content by spectrophotometry creatinine in urine samples of exposed workers at risk of internal counter and the study of all sources uncertainty that influence in the process. This technique is used to carry out the normalization of the amount of urine to urinary 24h, necessary for dosimetric purposes, as well as a criterion for acceptance of rejection of urine specimens received by the laboratory.

  7. Modeling, planning and XiO R CMS validation of TBI treatment (extended SSD 400 cm); Modelacion, planificacion y validacion del XiO CMS para tratamientos TBI (SSD extendida de 400 cm)

    Energy Technology Data Exchange (ETDEWEB)

    Teijeiro, A.; Pereira, L.; Moral, F. del; Vazquez, J.; Lopez Medina, A.; Meal, A.; Andrade Alvarez, B.; Salgado Fernandez, M.; Munoz, V.

    2011-07-01

    The whole body irradiation (TBI) is a radiotherapy technique previously used a bone marrow transplant and for certain blood diseases, in which a patient is irradiated to extended distance (SSD from 350 to 400). The aim of the TBI is to kill tumor cells in the receiver and prevent rejection of transplanted bone marrow. The dose is prescribed at the midpoint of the abdomen around the navel wing. The most planners not permit the treatment of patients with a much higher SSD to 100 cm, also using the table TBI with spoiler to increase skin dose should be taken into account This requires measurements and checks ad hoc if you use a planner, because modeling is not optimized a priori for an SSD of 400 cm.

  8. Experimental validation of easy algebraic models for power estimation of PV modules; Validacion experimental de metodos algebraicos sencillos de estimacion de la potencia maxima de modulos fotovoltaicos de siclicio cristalinoa Sol real

    Energy Technology Data Exchange (ETDEWEB)

    Fuentes, C. M.; Aguilera, T. J.; Nofuentes, G. G.; Alvarez, E. M.; Castro, G. M. A.

    2004-07-01

    From electrical parameters of a PV module measured in conditions referred to as standard test conditions (STC, or standard reporting conditions, SRC) it is possible to predict its behaviour under natural sunlight, through numerical or algebraic methods. Some simple algebraic methods are experimentally compared in this work. Eventually, it is determined the method that fits best the empirical data concerning maximum power and energy yield of a calibrated m-Si PV module sited in the city of Jaen (Spain) from October 2003 to May 2004. (Author)

  9. Comparison and validation of the results of the AZNHEX v.1.0 code with the MCNP code simulating the core of a fast reactor cooled with sodium; Comparacion y validacion de los resultados del codigo AZNHEX v.1.0 con el codigo MCNP simulando el nucleo de un reactor rapido refrigerado con sodio

    Energy Technology Data Exchange (ETDEWEB)

    Galicia A, J.; Francois L, J. L.; Bastida O, G. E. [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico); Esquivel E, J., E-mail: blink19871@hotmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2016-09-15

    The development of the AZTLAN platform for the analysis and design of nuclear reactors is led by Instituto Nacional de Investigaciones Nucleares (ININ) and divided into four working groups, which have well-defined activities to achieve significant progress in this project individually and jointly. Within these working groups is the users group, whose main task is to use the codes that make up the AZTLAN platform to provide feedback to the developers, and in this way to make the final versions of the codes are efficient and at the same time reliable and easy to understand. In this paper we present the results provided by the AZNHEX v.1.0 code when simulating the core of a fast reactor cooled with sodium at steady state. The validation of these results is a fundamental part of the platform development and responsibility of the users group, so in this research the results obtained with AZNHEX are compared and analyzed with those provided by the Monte Carlo code MCNP-5, software worldwide used and recognized. A description of the methodology used with MCNP-5 is also presented for the calculation of the interest variables and the difference that is obtained with respect to the calculated with AZNHEX. (Author)

  10. Quality in the organizations (enterprises and institutions of production and of services). Validation of the determination by atomic absorption of sodium and potassium in acid rain; Calidad de las organizaciones (empresas e instituciones de produccion y de servicios). Validacion de la determinacion por absorcion atomica de sodio y potasio en lluvia acida

    Energy Technology Data Exchange (ETDEWEB)

    Arreola T, D.L

    2005-07-01

    The present work is focused to the environmental area and in specific to the validation of an analytical method by means of one of the techniques more used for the determination of metals, the atomic absorption spectrophotometry. Applied to the study of the acid rain and its diverse forms in the nature. As well as their consequences and the role that the man carries out in the contribution toward this phenomenon. To approach the following text it will be mention shortly how is distributed, beginning with the introduction that is about the importance of the role of the acid rain, its effects and repercussions in the environment. In the first chapter the points that we should be evaluated to carry out a validation are analyzed. Being the main ones, the precision, accuracy, lineal interval, among others. Continuing in the second chapter with the foundation study, equipment and interferences of the atomic absorption spectrophotometry technique. The last chapter contains the experimental part, continuing for each evaluated point, from the experimental development, results and its analysis. (Author)

  11. Validation of the methodology for determining As, Sb, Hg, and Se in the water supply in Tudela, Navarra, spain, by atomic absorption; Validacion de la metodologia para la determinacion de As, Sb, Hg, y Se en aguas de abastecimiento a Tudela (Navarra) por absorcion atomica

    Energy Technology Data Exchange (ETDEWEB)

    Gale, M. A.; Cebrian, N.; Ormad, P.; Ovelleiro, J. L.

    2002-07-01

    In compliance with the current regulations on water quality, an analytical methodology has been put in place in the laboratory of the waste water treatment plant in Tudela, Navarre (Spain) to monitor As, Sb, Hg, and Se in the water going into the public water supply. The technique used to monitor these elements is atomic absorption spectrometry, As, Sb, Se are determined by the generation of hydrides and Hg by the generation of cold vapour. In addition, in order to ensure the authenticity of the results, the methodology employed has been validated by a study of the following technical characteristics: linearity, work interval, sensitivity, precision and accuracy. Extremely satisfactory results were obtained in all cases. A linear range between 0 and 1000 mg/l for all four elements and extremely low detection and quantification limits (less than 1 mg/l) were found. In the study of the method's accuracy, the C. V. s were below the legally established minima and the method was found to be very accurate. (Author) 18 refs.

  12. Validation of a new version of software for monitoring the core of nuclear power plant of Laguna Verde Unit 2, at the end of Cycle 10; Validacion de una nueva version del software para monitoreo del nucleo de la Central Laguna Verde Unidad 2, al final del Ciclo 10

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, G.; Calleros, G.; Mata, F. [Comision Federal de Electricidad, Central Nucleoelectrica de Laguna Verde, Carretera Cardel-Nautla Km 42.5, Veracruz (Mexico)], e-mail: gabriel.hernandez05@cfe.gob.mx

    2009-10-15

    This work shows the differences observed in thermal limits established in the technical specifications of operation, among the new software, installed at the end of Cycle 10 of Unit 2 of nuclear power plant of Laguna Verde, and the old software that was installed from the beginning of the cycle. The methodology allowed to validate the new software during the coast down stage, before finishing the cycle, for what could be used as tool during the shutdown of Unit 2 at the end of Cycle 10. (Author)

  13. Validation of the methodology for the quantitative determination of lead in cosmetics dyes available in the national market by atomic absorption spectroscopy with flame; Validacion de la metodologia para la determinacion cuantitativa de plomo en tintes cosmeticos disponibles en el mercado nacional por espectroscopia de absorcion atomica con llama

    Energy Technology Data Exchange (ETDEWEB)

    Silva Trejos, Paulina [Univ. de Costa Rica, Escuela de Quimica, telefono 2511-4870, fax 2253-5020 (Costa Rica)], E-mail: stpaulinita@gmail.com

    2008-07-15

    The analytical methodology was validated to quantify lead in cosmetics dyes available on the national market, by the method of atomic absorption spectroscopy with flame. The samples were digested by wet digestion with HNO{sub 3} to 65% m/m in a microwave oven, the percentage of recovery for the digestion of samples of 0,25 g and 0,45 g in 5,00 mL was of 100,5{+-}0,5. The field of optimal linearity detection limit was 5,0 mg/L with a correlation coefficient of 0,9998. The limits of detection and quantification limits determined graphically by the method of row errors for linear regression of 0,12{+-}0,02 mg/L and 0,21{+-}0,02 mg/L, respectively. Precision was evaluated determining the repeatability as standard deviation of five replicas of a positive dye for lead, according to the definition of the ISO, 2{radical}2*, and obtained a value of 2,3. The veracity was determined through percentages of recovery assessed, adding aliquots of lead patterns to dye samples and compared with the same mass to which they are not make additions. The dye samples were obtained at point of sale, such as pharmacies, beauty suppliers, supermarkets, sales of natural products and the central market of San Jose. The dyes tested contain lead acetates active ingredient, these are: Doni, Mont D'Or, Matador y Siempre Joven; they are produced locally, Youthair brand and American manufacturing. (author) [Spanish] La metodologia analitica fue validada para determinar cuantitativamente el plomo en tintes cosmeticos disponibles en el mercado nacional, por el metodo de espectroscopia de absorcion atomica con llama. Las muestras se dirigieron por digestion humeda con HNO{sub 3} al 65% m/m en horno de microondas; el porcentaje de recuperacion para la digestion de muestras de 0,25 g y 0,45 g en 5,00 mL fue de 100,5{+-}0,5. El ambito de linialidad optimo fue del limite de deteccion de 5,0 mg/L con un coeficiente de correlacion de 0,9998. Los limites de deteccion y los limites de cuantificacion determinados graficamente por el metodo de corredor de errores para regresion lineal de 0,12{+-}0,02 mg/L y 0,21{+-}0,02 mg/L, respectivamente. La precision fue evaluada determinando la repetitividad como desviacion estandar de 5 replicas de un tinte positivo para plomo, de acuerdo con la definicion de la ISO, 2{radical}2*, y se obtuvo un valor de 2,3. La veracidad se determino por medio de los porcentajes de recuperacion evaluados, agregando alicuotas de patrones de plomo a muestras de tinte y comparandolo con muestras de igual masa a las que no se les realizo adicion. Las muestras de tintes se obtuvieron en puestos de venta, tales como farmacias, suplidoras de belleza, supermercados, centros de ventas de productos naturales y el mercado central de San Jose. Los tintes analizados contienen acetato de plomo como ingrediente activo, estos son: Doni, Mont D'Or, Matador y Siempre Joven; son producidos localmente, de marca Youthair y fabricacion norteamericana. (autor)

  14. Validation of a new software version for monitoring of the core of the Unit 2 of the Laguna Verde power plant with ARTS; Validacion de una nueva version del software para monitoreo del nucleo de la Unidad 2 de la Central Laguna Verde con ARTS

    Energy Technology Data Exchange (ETDEWEB)

    Calleros, G.; Riestra, M.; Ibanez, C.; Lopez, X.; Vargas, A.; Mendez, A.; Gomez, R. [CFE, Central Nucleoelectrica de Laguna Verde, Alto Lucero, Veracruz (Mexico)]. e-mail: gcm9acpp@cfe.gob.mx

    2005-07-01

    In this work it is intended a methodology to validate a new version of the software used for monitoring the reactor core, which requires of the evaluation of the thermal limits settled down in the Operation Technical Specifications, for the Unit 2 of Laguna Verde with ARTS (improvements to the APRMs, Rod Block Monitor and Technical specifications). According to the proposed methodology, those are shown differences found in the thermal limits determined with the new versions and previous of the core monitoring software. Author)

  15. Validation of the model of Critical Heat Flux COBRA-TF compared experiments of Post-Dryout performed by the Royal Institute of Technology (KTH); Validacion del Modelo de Critical Heat Flux de COBRA-TF frente a los Experimentos de Post-Dryout realizados por el Royal Institute of Technology (KTH)

    Energy Technology Data Exchange (ETDEWEB)

    Abarca, A.; Miro, R.; Barrachina, T.; Verdu, G.

    2014-07-01

    In this work is a validation of the results obtained with different existing correlations for predicting the value and location of the CTF code CHF, using them for experiments of Post-Dryout conducted by the Royal Institute of Technology (KTH) in Stockholm, Sweden. (Author)

  16. Correction of the angular dependence of MatriXX Evolution detectors and its impact in the IMRT and VMAT treatment validation; Correccion de la dependencia angular de los detectores del MatriXX Evolution y su impacto en la validacion de tratamientos de IMRT y VMAT

    Energy Technology Data Exchange (ETDEWEB)

    Casares Magaz, O.; Seongheon, K.; Hernandez Armas, J.; Papanikolaou, N.

    2014-07-01

    The purpose of the study was to create detector element-specific angular correction factors for each detector of the MatriXX planar ion chamber array and compare them to vendor-default angular correction factors. Additionally, the impact of both factors on gamma index was quantified using two corrections. The correction factor of each element is determined irradiating the detector at different incidences by the ratio of the calculated expected dose to the MatriXX measured dose as a gantry angle function. To evaluate its impact, sixty-five pre-irradiated patient-specific dose validations were re-analyzed using the gamma index with: 3%/3 mm, 2%/2 mm, 1%/1 mm criteria. The factors for 6 MV were found to differ (7%) from the default ones for specific angles particularly for 85 degree centigrade to 95 degree centigrade. For 10 MV, differences (1.0%) existed when correction factors were created using various ROI's. Two corrections were proposed, absolute differences for 3%/3 mm, 2%/2 mm, and 1%/1 mm were up to 1.5%, 4.2% and 4.1% ( p < 0.01), respectively. Large differences in the default and specific factors were noted for 6 MV and lead to improvement of the absolute gamma index value of up to 4.2%. In general, gamma index value increases for patient specific dose validations when using device specific factors. (Author)

  17. Validation of the coupled TRACE /PARCS model of KKL through data of plant from the event shooting turbine 2001; Validacion del modelo acoplado TRACE/PARCS de KKL por medio de los datos de planta del evento disparo de turbina 2001

    Energy Technology Data Exchange (ETDEWEB)

    Hidalga, P.; Sekhri, A.; Baumann, P.; Miro, R.; Barrachina, T.; Morera, D.; Verdu, G.

    2014-07-01

    In order to improve the modeling of the nuclear power station Leibstadt (KKL), has been used neutronic code PARCS 3D mesh and the Thermo-hydraulic TRACE. This work is part of the development of a multi-scale methodology and multi-physic allowing the analysis of transient in the reactor, using the available simulation tools. To check the validity of the model it has been simulated a transient complex type turbine trigger the same actual event in plant-based and the results have been compared. At the same time, have been generated the necessary effective sections corresponding to the cycle that is happened the event using the SIMTAB methodology, developed by the ISIRYM jointly with IBERINCO. The model used in TRACE is based on the prior model existing TRAC-BF1. The comparison with plant data shows a good agreement with the data from the simulation. As a result, it can be concluded that KKL TRACE/PARCS coupled model with the generation of effective sections SIMTAB provides a satisfactory analysis of transient turbine trigger complex. (Author)

  18. Study of a scintillation neutron detector of {sup 1O}B+ZnS(Ag) as alternative to the {sup 3}He detectors: model MCNPX and validation; Estudio de un detector de neutrones de centelleo de {sup 10}B+ZnS(Ag) como alternativa a los detectores de {sup 3}He: modelo MCNPX y validacion

    Energy Technology Data Exchange (ETDEWEB)

    Guzman G, K. A.; Gallego D, E.; Lorente F, A.; Ibanez F, S. [Universidad Politecnica de Madrid, Departamento de Ingenieria Energetica, E.T.S. Ing. Industriales, Jose Gutierrez Abascal 2, 28006 Madrid (Spain); Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico); Mendez V, R. [CIEMAT, Av. Complutense 40, 28040 Madrid (Spain); Gonzalez, J. A., E-mail: karen.guzman.garcia@alumnos.upm.es [Universidad Politecnica de Madrid, Laboratorio de Ingenieria Nuclear, ETSI Caminos, Canales y Puertos, Ciudad Universitaria, C. Profesor Aranguren 3, 28040 Madrid (Spain)

    2015-10-15

    Using Monte Carlo methods with the code MCNPX, was estimated the response of a scintillation neutron detector of Zn S(Ag) with a mixture of {sup 10}B high enrichment. The detector consists of four plates of Poly (methyl methacrylate) (PMMA) and five layers of ∼0, 017 cm {sup 10}B+ZnS(Ag) in contact with PMMA. The naked detector response was calculated and with different thicknesses of high density polyethylene moderator, for 29 monoenergetic sources and for sources of {sup 241}AmBe and {sup 252}Cf of neutrons. In these calculations the reactions {sup 10}B(n,α){sup 7}Li and neutron fluence in the sensitive area of detector {sup 10}B+ZnS(Ag) were estimated. Measurements were performed in the Laboratory of Neutron Measurement to quantify detections in counts per second to a neutron source of {sup 252}Cf to 200 cm on the bench, modeling with MCNPX, these measures were compared to validate the model and the Zn S(Ag) efficiency of α detection was estimated. Calculations in the LPN-CIEMAT were realized. Starting from the validation new models were carried out with geometries that improve the detector response, trying reaching the detection of 2, 5 cps-ng of {sup 252}Cf comparable requirement for responding to the installed equipment of {sup 3}He in the radiation portal monitor. This type of detector can be considered an alternative to detectors of {sup 3}He for detecting special nuclear material. (Author)

  19. Design of impact limiters of a bulk type B (U) . Trials of fall and validation of the analytical model In the design of a container for transportation of spent fuel, the impact limiters are a fundamental part for compliance with regulatory requirements; Diseno de los Limitadores de impacto de un Bulto Tipo B(U). Ensayos de Caida y validacion del Modelo Analitico

    Energy Technology Data Exchange (ETDEWEB)

    Garrido Quevedo, D.

    2013-07-01

    The aim is to confirm through real trials that the design and the results obtained through simulation conform to reality with a high degree of confidence... The combination of tests on scale models and the validation of the methods of calculation are necessary tools for the design of limiters impact a container of spent fuel transport.

  20. Validation of the Read Out Electronics for the CMS Muon Drift Chambers at Tests Beam in CERN/GIF; Validacion en el Test Beam del CERN/GIF de la electronica de Lectura de las Camaras de Muones del Experimento CMS

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, C.; Fouz, M. c.; Marin, J.; Oller, J. C.; Willmott, C.; Amigo, L. J.

    2002-07-01

    Part of the readout system for the CMS muon drift chambers has been tested in test beams at CERN/GIF. Read Out Board (ROB) and HPTD have been validated with signals from a real muon beam, with an structure and flux similar to LHC operating conditions and using one of the chambers produced in CIEMAT already located in the test beam area under normal gas and voltage conditions. (Author) 5 refs.

  1. Las representaciones sobre el aprendizaje de los alumnos de los alumnos de profesorado. Diseño y validacion de un instrumento para analizar concepciones implícitas sobre el aprendizaje en profesores de matemática en formación

    Directory of Open Access Journals (Sweden)

    García, María B.

    2008-12-01

    Full Text Available Teaching is always based on some conception of learning and a large part of learning is influenced by the ways that teachers perceive the course subject and the expectations about the learners. Research has shown that teachers and teaching students have different learning conceptions from those which are formally included in university courses. These predominant ideas are mostly implicit and different from the explicit conceptions. The goals of this work were to assess the reliability and validity of an instrument to measureimplicit learning conceptions in university mathematic teaching students and to describe their content. Methodology: it was conducted a cross-sectional study of the variable “conceptions about learning ", with two dimensions and three categories for analysis. The instrument was adapted from the Dilemmas Questionnaire of Martin et al (2004 and was applied to 75 students. Statistical analysis included Cronbach´s Alpha for testing reliability and Factorial Analysis for testing construct validity. The content of learning conceptions was discussed from the direct, interpretative and constructive domain theories.

  2. Estabilidad de taludes del plan de minado para la vida de mina (VDM) 2011 - Tajo Abierto Pierina

    OpenAIRE

    Callupe Arzapalo, Will Honorato; Callupe Arzapalo, Will Honorato

    2011-01-01

    Las evaluaciones técnicas y económicas de los proyectos mineros están basadas en los planes de minado que se desarrollan con la finalidad de recuperar la mayor cantidad de mineral con eficiencia, es decir, que el minado sea realizado operacional, ambiental y geotécnicamente seguras. Los planes de minado deben cumplir ciertas validaciones, una de ellas desde la perspectiva geotécnica cumpliendo con el criterio de aceptabilidad establecido de lograr un Factor de Seguridad (FdS) mínimo de 1.2. ...

  3. The application of the expert system Seilum for the energy assessment in the Universidad Nacional Autonoma de Mexico (UNAM) illumination, phase 1: Acatlan; Aplicacion del sistema experto Seilum para la evaluacion energetica de la iluminacion en la UNAM, fase 1: Acatlan

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, Nicolas; Lara Rosano, Felipe; Sanchez Cifuentes, Augusto [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

    1993-12-31

    This paper analyses the characteristics of the expert system Seilum and its first validation after being employed to compare the energy audit of the illumination installations carried out at the Universidad Nacional Autonoma de Mexico (UNAM)`s Acatlan Unit. In accordance with these results, the perspectives of its generalized application in the balance of the units is proposed, as well as in the small and medium size Mexican industry. [Espanol] En este trabajo se discuten las caracteristicas del sistema experto Seilum y su primera validacion luego de haber sido empleado para comparar la auditoria energetica de las instalaciones de iluminacion llevada a cabo en la unidad de acatlan de la Universidad Nacional Autonoma de Mexico (UNAM). De acuerdo a estos resultados se plantean las perspectivas de su empleo generalizado en las demas unidades, asi como en la pequena y mediana industria mexicana.

  4. The application of the expert system Seilum for the energy assessment in the Universidad Nacional Autonoma de Mexico (UNAM) illumination, phase 1: Acatlan; Aplicacion del sistema experto Seilum para la evaluacion energetica de la iluminacion en la UNAM, fase 1: Acatlan

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, Nicolas; Lara Rosano, Felipe; Sanchez Cifuentes, Augusto [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

    1992-12-31

    This paper analyses the characteristics of the expert system Seilum and its first validation after being employed to compare the energy audit of the illumination installations carried out at the Universidad Nacional Autonoma de Mexico (UNAM)`s Acatlan Unit. In accordance with these results, the perspectives of its generalized application in the balance of the units is proposed, as well as in the small and medium size Mexican industry. [Espanol] En este trabajo se discuten las caracteristicas del sistema experto Seilum y su primera validacion luego de haber sido empleado para comparar la auditoria energetica de las instalaciones de iluminacion llevada a cabo en la unidad de acatlan de la Universidad Nacional Autonoma de Mexico (UNAM). De acuerdo a estos resultados se plantean las perspectivas de su empleo generalizado en las demas unidades, asi como en la pequena y mediana industria mexicana.

  5. Pilot plant for the radioactive decontamination of spent oils; Planta piloto para la descontaminacion radiactiva de aceites gastados

    Energy Technology Data Exchange (ETDEWEB)

    Flores E, R.M.; Ortiz O, H.V.; Cisneros L, L.; Lopez G, R. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    In this work the operation parameters obtained in the laboratory of oil storage are presented, as well as the operations which shape the pilot plant, the design criteria and the basic design of the core equipment of the developed process. Finally, the comparative results obtained the decontamination process of oil are given as well as laboratory scale. (Author)

  6. Pilot plant for the radioactive decontamination of spent oils

    International Nuclear Information System (INIS)

    Flores E, R.M.; Ortiz O, H.V.; Cisneros L, L.; Lopez G, R.

    2002-01-01

    In this work the operation parameters obtained in the laboratory of oil storage are presented, as well as the operations which shape the pilot plant, the design criteria and the basic design of the core equipment of the developed process. Finally, the comparative results obtained the decontamination process of oil are given as well as laboratory scale. (Author)

  7. Intelligent tutorial system for selftraining in tuning of control systems; Sistema tutorial inteligente para el autoentrenamiento en sintonizacion de sistemas de control

    Energy Technology Data Exchange (ETDEWEB)

    Romero Jimenez, Guillermo; Perez Ocampo, Maria Concepcion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    In this paper the design, development and validation of an intelligent tutorial system oriented to the instruction of techniques of tuning of control systems is described. This system is based on systems previously developed in the Simulation Unit of the Instituto de Investigaciones Electricas (IIE). The designed system accounts with four modules: of knowledge, the student model, of tutor and of interface, basic characteristics that allows to locate this system in the context of the intelligent tutorial systems. In this system in particular, the knowledge module was only modified, because advantage is taken of the existing structure to incorporate a new dominion of application: the one of the techniques of tuning of control systems. The system maintains the characteristic that it can also be used as a consultation system. In addition to the design and validation of the tutorial system, when following the methodology of processing the degree of generality of the developed system, was evaluated, taking into account the evaluation and quantification of metrics that the engineering software proposes. [Spanish] En este trabajo se describen el diseno, el desarrollo y la validacion de un sistema tutorial inteligente orientado a la instruccion de tecnicas de sintonizacion de sistemas de control. Este sistema esta basado en sistemas desarrollados anteriormente en la Unidad de Simulacion del Instituto de Investigaciones Electricas (IIE). El sistema disenado cuenta con cuatro modulos: de conocimiento, del modelo del estudiante, de tutor y de interfaz, caracteristica principal que permite ubicar a este sistema en el contexto de los sistemas tutoriales inteligentes. En este sistema en particular solo se modifica el modulo de conocimiento, pues se aprovecha la estructura existente para incorporar un nuevo dominio de aplicacion: el de las tecnicas de sintonizacion de sistemas de control. El sistema mantiene la caracteristica de que tambien puede utilizarse como un sistema de

  8. Theorical and experimental study of the induced forces by the mixed, divergent, convergent and straight labyrinth of seal systems on the steam turbines, gas turbines and compressor rotors; Estudio teorico-experimental de las fuerzas inducidas por los sistemas de sellos de laberinto rectos, convergentes, divergentes y mixtos sobre los rotores de turbinas de vapor, turbinas de gas y compresores

    Energy Technology Data Exchange (ETDEWEB)

    Salazar San Andres, Octavio Ramon

    1991-12-31

    A theoretical and experimental research is conducted in order to determine the labyrinth seal forces, as well as the stiffness and damping coefficients for straight, convergent, divergent, and combined shapes on turbine and compressor rotors. The mathematical model is deduced on the basis of the single volume method and its solution is obtained by the perturbation procedure. The validation is achieved with published results. Experimental work carried out on a test bench is described in the text. This involved labyrinth seals with straight, convergent, and divergent profiles, as the published information relating to mixed type is sufficient to perform the evaluation. The conclusions demonstrate that the model is able to predict and determine the performance of labyrinth seals based on forces and rotordynamic coefficients for static and dynamic motions. Finally, tests on real steam turbines of 300 MW are recommended. In this case the high pressures and use of wheels with strips on the periphery and supported by the upper part of blades, increase the susceptibility of self excited subsynchronous vibrations. [Espanol] Se presenta una investigacion teorica-experimental relacionada con la obtencion y validacion de un modelo matematico capaz de predecir las fuerzas y los coeficientes de rigidez y amortiguamiento de los sellos de laberinto de tipo recto, convergente, divergente y mixto que se emplean en turbinas y compresores tanto terrestres como aereos. El modelo matematico propuesto se deduce a partir del metodo de un solo volumen y su solucion se obtiene a traves de metodos perturbatorios. La validacion del mismo se consigue al comparar con resultados experimentales publicados en revistas especializadas y con los datos medidos en un banco de pruebas cuya descripcion se incluye en el trabajo, cualculado para sellos rectos, convergentes y divergentes, ya que la informacion publicada respecto al tipo mixto o combinado es suficiente. Las conclusiones de la investigacion

  9. Trazabilidad y validación de requerimientos funcionales de sistemas informáticos mediante la transformación de modelos conceptuales

    Directory of Open Access Journals (Sweden)

    Oscar Carlos Medina

    2016-04-01

    Full Text Available El objetivo de este trabajo es caracterizar un método que permita la trazabilidad y validación de requerimientos funcionales de un sistema de información mediante la transformación de modelos conceptuales. Para lo cual se construyó un software denominado SIAR (Sistema Integral de Administración de Requerimientos que administra los requerimientos funcionales y utiliza UML (Lenguaje Unificado de Modelado para su representación como Casos de Uso. La finalidad principal de esta aplicación web es la gestión de Casos de Uso con una herramienta que agilice su registro, normalice su contenido y posibilite la trazabilidad de los cambios e implemente validaciones funcionales. Por ejemplo, un procedimiento automatizado de análisis de consistencia de Casos de Uso, para lo cual el sistema genera un grafo con la transición de estados de cada Caso de Uso que es analizado en un simulador de autómata finito determinista para verificar la cohesión de los escenarios en él definidos.

  10. Numerical simulation by CFD of the behavior of the Inter stage 1 flow in stable state of a gas turbine Frame 7; Simulacion numerica por CFD del comportamiento del flujo en la inter etapa 1 en estado estable de una turbina de gas frame 7

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez R, Alejandro; Lopez H, Juan Arturo R; Mazur Czerwiec, Zdizslaw; Cordero G, Jesus [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2006-07-01

    This technical article presents an analysis including the three-dimensional modeling of the flow channel in the nozzle and the movable blade in order to discover the velocity distribution, temperatures and pressures of the main hot gas flow produced in the inter-stage 1. The aim is to establish key evaluation criteria leading to an opportune repair and therefore smaller operation expenses. Thus, the application of a commercial software of CFD is described to model the channel of the first stage in the gas turbine Frame 7, the geometric architecture is shown in the web of the gas turbine, as well as the border conditions used in the results assessment. [Spanish] Este articulo tecnico presenta un analisis que incluye la modelacion tridimensional del canal de flujo en la tobera y el alabe movil para conocer las distribuciones de las velocidades, temperaturas y presiones del flujo principal de gases calientes que se desarrollan en la inter-etapa 1. El fin es establecer criterios clave de evaluacion que conduzcan a una oportuna reparacion y por ende menores gastos de operacion. Asi, se describe la aplicacion de un software comercial de CFD para modelar el canal de flujo de la primera etapa de una turbina de gas Frame 7, se muestra la arquitectura geometrica y el mallado de la turbina de gas, asi como las condiciones de frontera usadas y la validacion de resultados.

  11. Expert system based on cases for a diagnosis system in real time; Sistema experto basado en casos para un sistema de diagnostico en tiempo real

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa R, Alfredo; Quintero R, Agustin; Zambrano D, S Venecia [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2006-07-01

    This article presents the development of an Expert System based in the Reasoning Based on Cases methodology. Such system was performed with the purpose of creating an information system in charge of supervising and diagnosing the status of the main equipment of fossil fuel power plants for electricity generation. Here is presented the reasons why this methodology was used for the expert system and why Induce-It -the specialized tool that implements it- was also chosen, as well as the analysis made for the disposition of the operative architecture of the Expert System, the very development of this software architecture and, finally, the validation of the correct operation of this system by means of a simulator that simultaneously puts to the test the error handling of the Expert System. [Spanish] Este articulo presenta el procedimiento que siguio el desarrollo de un Sistema Experto asentado en la metodologia de Razonamiento Basado en Casos; realizado con el fin de crear un sistema de informacion encargado de supervisar y diagnosticar el estado de los equipos principales de centrales de generacion termoelectrica. Se expone justificadamente la seleccion de la metodologia del sistema experto y de la herramienta especializada que lo implementa (Induce-It), asi como el analisis realizado para la disposicion de la arquitectura operativa del Sistema Experto, el desarrollo mismo de esta arquitectura del software y, finalmente, la validacion del correcto funcionamiento de este sistema mediante un simulador que a la vez pone a prueba el manejo de errores del Sistema Experto.

  12. la investigación sobre el síndrome de burnout en latinoamérica entre 2000 y el 2010

    Directory of Open Access Journals (Sweden)

    Fátima Díaz Bambula

    2016-01-01

    Full Text Available Con el objetivo de crear un panorama sobre las investigaciones en burnout en América Latina se llevó a cabo una revisión sistemática de 89 estudios, realizados y publicados en revistas científicas, libros y en memorias de eventos científicos en 12 países latinoamericanos entre el 2000 y el 2010. Las bases de datos y buscadores utilizados fueron Science Direct, Scopus, Ebsco, Redalyc, Scielo y Google Académico. En cuanto a los resultados, se evidencia la ten - dencia al uso de los planteamientos conceptuales y los instrumentos elaborados por Maslach y Jackson, seguidos por los del investigador español Pedro Gil-Monte. Los diseños de las investigaciones son descriptivos-correlaciones. Se presentan validaciones de instrumentos, en su mayoría en profesiones asistenciales. Se concluye que, en la mayoría de estudios, se hizo uso de teorías y métodos de evaluación creados en países “desarrollados”, industrializados, sin la reflexión acerca de la especificidad de los procesos de trabajo propios del contexto latinoamericano.

  13. Integration of a platform based in field bus (profibus), for the development of process control systems; Integracion de una plataforma basada en bus de campo PROFIBUS, para el desarrollo de sistemas de control de procesos

    Energy Technology Data Exchange (ETDEWEB)

    Islas Perez, Eduardo; Arroyo Figueroa, Gustavo; Villavicencio Ramirez, Alejandro [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1994-03-01

    The integration of a computer platform for the process sequential control system development and validation of some processes of thermoelectric generation, which are constituted by operations of the logic-sequential type. The platform is composed of a process simulator, a sequence tester, a logic programmable controller, and an operational computer. All these elements are interconnected through a field bus type PROFIBUS (Process Field Bus) (Standard DIN 19245). This platform has been used for the elaboration and evaluation of the operational sequence and control of demineralization, reverse osmosis, and condensate polishing water treatment plants, which are simulated in a personal computer. [Espanol] Se presenta la integracion de una plataforma de computo para el desarrollo y validacion de sistemas de control secuencial de algunos procesos de generacion termoelectrica, los cuales estan constituidos por operaciones de tipo logico-secuencial. La plataforma esta compuesta por un simulador del proceso, un probador de secuencias, un controlador logico programable y una computadora de operacion. Todos estos elementos estan interconectados a traves de un bus de campo tipo PROFIBUS (Process Field Bus), (Estandar DIN 19245). Esta plataforma se ha utilizado para elaborar y validar la programacion de las secuencias de operacion y control de plantas de tratamiento de agua por desmineralizacion, osmosis inversa y pulidores de condensados, las cuales se tienen simuladas en una computadora personal

  14. System based on fuzzy logic for blade temperature supervision of the gas turbine of a CTCC; Sistema basado en logica difusa para la supervision de temperatura de alabes en la turbina de gas de una CTCC

    Energy Technology Data Exchange (ETDEWEB)

    Espinola V, Agustin; Madrigal E, Guadalupe [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Astorga Z, Carlos M [Cento Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico)

    2005-07-01

    The fuzzy logic has found an ample acceptance when it is used to handle high level control functions that fall outside the dominion of the conventional control methods. One of these cases is the application of the fuzzy logic to the supervisory control. In this article a supervisory control system designed with base in the theory of the diffuse logic, applied to the supervisory control of the blades temperature of a turbo gas unit (TGU). The validation results of the performance of the temperature supervisory control, obtained from tests before different scenarios, when this scheme of control was implemented in a nonlinear mathematical model that simulates a Thermometrical Power Station of Combined Cycle (TPSCC) [Spanish] La logica difusa ha encontrado una amplia aceptacion cuando se emplea para manejar funciones de control de alto nivel que caen fuera del dominio de los metodos convencionales de control. Uno de estos casos es la aplicacion de la logica difusa al control supervisorio. En este articulo se presenta un sistema de control supervisorio disenado con base en la teoria de la logica difusa, aplicado al control de supervision de la temperatura de alabes de una unidad turbo gas (UTG). Se muestran los resultados de validacion del desempeno del supervisorio de temperatura, obtenidos ante diferentes escenarios de pruebas, cuando se implemento este esquema de control en un modelo matematico no lineal que simula una Central Termoelectrica de Ciclo Combinado (CTCC)

  15. crítico: proposta de instrumento de coleta de dados

    Directory of Open Access Journals (Sweden)

    Daniela Borges Bittar

    2006-01-01

    Full Text Available La recolección de datos fundamenta la sistematización de la asistencia de enfermería, metodología esta que permite al enfermero aplicar los conocimientos técnico-científicos que fundamentan la profesión. Este estudio tuvo con objetivo elaborar un instrumento de recolección de datos, teniendo en mente el registro de manera eficiente y la validación en su forma aparente/y de contenido. Investigamos las señales y los síntomas frecuentemente encontrados en clientes de una Unidad de Cuidados Intensivo- Adulto y los clasificamos en Necesidades Humanas Básicas. Posteriormente, el instrumento fue sometido a validaciones aparente/y de contenido. Con relación a la estructura del instrumento, se detectó la necesidad de reducirlo, siendo este más práctico. Con respecto al contenido, los jueces concordaron que éste sería suficiente para el establecimiento de los diagnósticos de enfermería, favoreciendo el desarrollo de la sistematización de la asistencia al cliente crítico en la Unidad de Cuidados Intensivos.

  16. A simple model to evaluate the impact of the thermal power plants emissions; Un modelo simple para evaluar el impacto de las emisiones de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Rodas Grapain, Arturo; Salcido, Alejandro [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2000-07-01

    Formulation and validation of a dispersion model for relative plumes are presented in this paper. This model (MOTTQUIP: Modelo de Transporte Turbulento y Quimico de Plumas) was developed to assess the environmental impact of power generation. The theoretical formulation if this model is based on the integral form of the mass balance equation. MOTTQUIP can simulate (in two dimensions) the turbulent dispersion and chemical transformation phenomena of a nitrogen oxides (Nox) non-buoyant plume in an ozone (O{sub 3}) atmosphere. The results produced by MOTTQUIP, however, can run in a personal computer consuming relatively short CPU times. [Spanish] En este trabajo se presentan la formulacion y la validacion de un modelo (MOTTQUIP: Modelo de Transporte Turbulento y Quimica de Plumas) para evaluar el impacto de las emisiones de contaminantes reactivos de centrales termoelectricas. Este modelo se formula a partir de la forma integral de la ecuacion de balance de masa, y no de su forma diferencial, como se procede generalmente. MOTTQUIP simula, en dos dimensiones, la dispersion turbulenta y transformacion quimica de una pluma no flotante de oxidos de nitrogeno (Nox), misma que se interna paulatinamente en un ambiente de ozono (O{sub 3}). Los resultados obtenidos son comparados con los de modelos alternos que simulan el mismo sistema reactivo, encontrandose una concordancia bastante aceptable. Una ventaja de MOTTQUIP, sin embargo, es que puede utilizarse en sistemas de computo pequenos, empleando tiempos de CPU relativamente cortos.

  17. Food addiction in Latin America

    Directory of Open Access Journals (Sweden)

    Joel Figueroa-Quiñones

    2018-01-01

    Full Text Available Resumen La adicción alimentaria es un trastorno que se caracteriza por un deseo incontrolable de ingerir alimentos con alto contenido de grasas y azúcares. Esta dependencia se debe en parte, a que dichos alimentos activan el sistema de recompensa cerebral de manera similar a las drogas. Ello genera la liberación de neurotransmisores como la dopamina y oxitocina, lo cual desencadena una necesidad de repetir la conducta. En países desarrollados (en Europa, Asia y Norteamérica, existen reportes de adicción alimentaria en niños, adolescentes, estudiantes universitarios, grupos de minorías sexuales, mujeres y población adulta que padecen obesidad y/o sobrepeso. En Latinoamérica, estudios realizados en Chile reportan que 10% de estudiantes universitarios sufren adicción alimentaria, mientras que en Brasil 4% de adultos tienen el mismo trastorno. Los estudios sobre prevalencias de adicción alimentaria son escasos. Asimismo, se requieren validaciones de instrumentos de diagnóstico y estudios sobre la efectividad de la psicoterapia para modificar conductas en este trastorno.

  18. MODELO PARA EL PROCESO DE EXTRACCIÓN, TRANSFORMACIÓN Y CARGA EN BODEGAS DE DATOS. UNA APLICACIÓN CON DATOS AMBIENTALES

    Directory of Open Access Journals (Sweden)

    Néstor Darío Duque Méndez

    2016-01-01

    Full Text Available La administración de bodegas de datos o datawarehouse requiere de un procesamiento para garantizar la veracidad, integridad y centralización de los datos cuando existen diversas fuentes de información, haciendo necesario utilizar aplicativos especializados para la Extracción, Transformación y Carga de datos (ETL. Estos aplicativos presentan conflictos en su parametrización, carecen de la implementación de filtros de corrección adaptables a las características de los datos y pueden demandar altos costos para su implementación. En el presente artículo se plantea un modelo genérico que aplica las etapas de ETL y permite realizar seguimiento del proceso al mantener un registro histórico de errores filtrados y calcular indicadores para identificar la calidad en el procesamiento. La validación del modelo fue realizada sobre un caso de estudio con datos ambientales. El modelo demostró obtener resultados satisfactorios. Se plantea realizar más validaciones del modelo, en otros ámbitos, incluyendo nuevos tipos y estructuras de datos.

  19. Kinematic and geometric characterization of the fracturation in the Berrocal (Toledo, Spain)

    International Nuclear Information System (INIS)

    Campos Egea, R.; Gumiel Martinez, P.; Pardillo Porras, J.

    1995-01-01

    The current research carried out it the El Berrocal Test Site belong to the ''Caracterizacion y validacion de los procesos de migracion de radionucleidos bajo condiciones reales en un medio granitico fracturado Project'', which is integrated in the ENRESA and EE R+D Programs aimed to establish the structural, lithological, geochemical, hydrochemical and hydrogeological aspects of the granite-Uranium mineralization system, to approach modelling of the U-Migration. The geometry and kinematics of fracturing which affect the El Berroal granite are shown in this paper. The kinematics of Late-Hercynian fractures is consistent with the development of an extension dilation zone off-set between the Meridional of Central System and Navamorcuente major faults, in a continued right-lateral shearing, accompanying E-W shortening in prolonged transpression. An statistical analysis of 1264 joints have been carried out. Joint spacing and aperture were also measured in profiles around the El Berrocal Test Site showing that joints may be grouped in three groups with orientations following Fisher distributions. Joint spacing shows fractal behaviour with a significant superimposed ramdon element (negative-exponential distribution) which is at present being evaluated. Finally, fracture trace mapping and detected fracture zones in boreholes from TLV data have been geometrically correlated and utilized to asses fracture connectivity. Connected networks of fractures have been obtained, which is a support fort further hydraulic tests carried out in the Porject. (Author) 53 refs

  20. Analysis tools for simulation of hybrid systems; Herramientas de analisis para simulacion de sistemas hibridos

    Energy Technology Data Exchange (ETDEWEB)

    Guillen S, Omar; Mejia N, Fortino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-07-01

    significativa en los costos de inversion. Dada la mezcla de tecnologia de generacion electrica que estan involucradas en un sistema hibrido, es muy importante disponer de una herramienta integrada con paquetes especializados de computo (software), que permitan efectuar las tareas de simulacion del funcionamiento operacional de estos sistemas. Aunado a lo anterior, no se debe dejar de considerar caracteristicas de funcionamiento, las facilidades al usuario, la claridad en los resultados obtenidos y la posibilidad de su validacion con respecto a prototipos instrumentados en campo. De igual modo, hay que considerar la identificacion de tareas involucradas en relacion con el lugar de instalacion de esta tecnologia de electrificacion. Actualmente, la tecnologia de sistemas hibridos se encuentra todavia en una etapa de desarrollo en el plano internacional, y existen limitaciones importantes en cuanto a la disponibilidad de metodologia y herramientas ingenieriles para el diseno optimo de estos sistemas. Con el desarrollo de este trabajo, se pretende contribuir al avance de la tecnologia y contar con herramientas propias para resolver la problematica descrita. En este articulo se describen las actividades que mas impacto tienen en el diseno y desarrollo de sistemas hibridos, asi como la identificacion de variables, caracteristicas principales y forma de validacion de herramientas en la integracion de una metodologia para la simulacion de estos sistemas, facilitando su diseno y desarrollo.

  1. GPLAD: PROGRAMACIÓN ESTRUCTURADA SOBRE DISPOSITIVOS ANDROID

    Directory of Open Access Journals (Sweden)

    LUISA FERNANDA HERNÁNDEZ RAMÍREZ

    2012-12-01

    Full Text Available La programación por medio de bloqueses un enfoque visual que permite a las personas jóvenesadquirir interés en el desarrollo de software.Así lo han demostrado herramientas para computadorescomo Scratch, StarLogo y Alice. Hoy en díahay estudiantes e ingenieros programadores quedesean implementar soluciones más estructuradas yhay pocas herramientas que, a través de programacióngráfica ofrezcan la posibilidad de solucionar problemasque se manejen en primeros semestres universitarios.Por otro lado, los dispositivos móviles, enespecial los que poseen sistema operativo Android,han tenido acogida en los últimos años, además, sonutilizados para resolver problemas en tiempo real.El objetivo de este trabajo fue demostrar la utilidadde una aplicación que soporta la programación estructuradapor medio de bloques sobre dispositivosAndroid, que facilita la creación y ejecución de códigoen el lenguaje Java sobre un servidor remoto. Serealizó un análisis para determinar el ambiente deprogramación, la creación de bloques con su representaciónintermedia y las validaciones para la generaciónde código, además, se realizaron pruebas através de la formulación de problemas matemáticosque se enseñan durante los primeros cursos de Ingenieríade sistemas en la Fundación UniversitariaSan Martín. Finalmente, se obtuvo el código Javade la solución a cada problema planteado dentro deGplad

  2. Comunicaciones inalámbricas en ambientes hostiles: modelo de radio propagación y respuesta de elementos constitutivos de la parte terminal de la cadena de radio altas temperaturas

    Directory of Open Access Journals (Sweden)

    Jorge Avella Castiblanco

    2010-01-01

    Full Text Available En este trabajo se analiza y se propone una solución para evitar la disminución del rango de alcance de los sistemas de comunicación inalámbricos en robots de exploración para ambientes con temperaturas entre 873 K y 1273 K, dado que en este rango de temperaturas se encuentran situaciones como las presentes en los incendios urbanos. El estudio realizado cuantifica la influencia de tres factores de atenuación de la onda electromagnética: En primer lugar se analiza teórica y experimentalmente la atenuación debida a la variación de los parámetros constitutivos de un medio levemente ionizado como función de la temperatura. En segundo lugar, se analiza experimentalmente el comportamiento electromagnético de uno de los principales elementos constituyentes de la parte terminal de la cadena de radio: la antena. Finalmente, se presentan las perspectivas y conclusiones del trabajo. Las validaciones experimentales se realizan en la frecuencia de 2,4 GHz y con variaciones en temperatura desde 900 K hasta 1300 K. Experimentalmente se obtiene una atenuación del orden de 10-5 dB/m para 923 K, y una permitividad relativa compleja igual a 1+j10-12. Los resultados experimentales realizados a la antena, muestran que ésta se desadapta a medida que cambian las condiciones de temperatura: experimentalmente se obtuvo una variación de 78 kHz/K, para un delta de temperatura de 85 K.

  3. Teorías de la educación de adultos que subyacen en el uso de videojuegos

    Directory of Open Access Journals (Sweden)

    Laura ALONSO DÍAZ

    2015-01-01

    Full Text Available La sociedad actual crece en edad y en tecnología, requiriendo de investigaciones en las que la educación permanente se convierta en su principal objeto de estudio. En este contexto comienzan a surgir tendencias en las que se promueve el uso de tecnologías lúdicas con objetivos pedagógicos y formativos a través de los videojuegos, pero los esfuerzos se están centrando en una etapa muy concreta de la vida, la infantil y la juvenil, habiendo apenas estudios en la edad adulta. En este artículo presentamos el proceso de validación de un cuestionario que nos permitirá conocer los rasgos propios de las teorías de educación de adultos que subyacen a los videojuegos a los que juegan las personas adultas, concretamente principios andragógicos, heutagógicos, del modelo social del aprendizaje y del modelo de formación basado en competencias. Se realizaron tres tipos de validaciones: de contenido, a través de juicio de expertos; de criterio, a través de entrevistas abiertas; y de constructo, mediante una prueba piloto. En total participaron doce expertos internacionales y 93 personas mayores de 16 años. Finalmente, hemos obtenido una prueba consistente y fiable que se estructura en seis dimensiones y 50 ítems, las dimensiones de la prueba son: datos del jugador, datos del videojuego, tecnológico-descriptiva, personal y contextual, interacción social, y desarrollo de competencias.

  4. 3D analysis of Navier-Stokes in steady state of the behavior of the flow in the Inter stage 1 of a gas turbine Frame 7; Analisis de navier-stokes tridimensional en estado estable del comportamiento del flujo en la inter etapa 1 de una turbina de gas frame 7

    Energy Technology Data Exchange (ETDEWEB)

    Henandez Rosete, Alejandro; Mazur C, Zdzislaw [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-11-15

    The results of the simulation by CFD (Computacional Fluid Dynamics) realized to the first stage of a gas turbine GE Frame 7 are presented. The analysis includes the 3D modeling of the flow channel in the nozzle and the movable blade to know the velocities distributions, temperatures and pressures of the main hot gas flow that are developed in the Inter stage. The results are influenced by the imposed border conditions in the properties of the main flow, the rotation of the movable blade, as well as the simulation of cooling air injection in the nozzle. The present study focuses in the validation of the model of the meshes of the ensemble nozzle-blade, for later realize an analysis of conjugated heat transfer in a model with ceramic lining type heat barrier (THB) in the movable blade. The analysis is realized in a CFD commercial code oriented to turbo-machinery using the equations of unstable flows 3D of Navier Stokes. [Spanish] Se presentan los resultados de la simulacion por CFD (Computacional Fluid Dynamics) realizada a la primera etapa de una turbina de gas GE Frame 7. El analisis incluye la modelacion tridimensional del canal de flujo en la tobera y el alabe movil para conocer las distribuciones de las velocidades, temperaturas y presiones del flujo principal de gases calientes que se desarrollan en la inter etapa. Los resultados son influenciados por las condiciones de frontera impuestos en las propiedades del flujo principal, la rotacion del alabe movil, asi como la simulacion de inyeccion de aire de enfriamiento en la tobera. El presente estudio se enfoca en la validacion del modelo de la malla del conjunto tobera-alabe, para posteriormente realizar un analisis de transferencia de calor conjugada en un modelo con recubrimiento ceramico tipo barrera termica (TBC) en el alabe movil. El analisis es realizado en un codigo de CFD comercial orientado a turbomaquinaria utilizando las ecuaciones de flujos inestables 3D de Navier Stokes.

  5. Performance optimization methodology in a Francis turbine vacuum cleaner based on the modification of the boundary conditions; Metodologia de optimizacion del rendimiento en un aspirador de turbina Francis en base a la modificacion de las condiciones de frontera

    Energy Technology Data Exchange (ETDEWEB)

    Galvan Gonzalez, S.; Rubio Maya, C.; Mendoza Covarrubias, C. [Universidad Michoacana de San Nicolas Hidalgo, Morelia, Michoacan (Mexico)]. E-mail: srgalvan@umich.mx; crmaya@umich.mx; cmendoza@umich.mx; Pacheco Ibarra, J.; Martinez Patino, J. [Universidad de Guanajuato, Salamanca, Guanajuato (Mexico)

    2010-11-15

    This paper focus on establishing an optimization methodology for maximizing the draft tube performance as a function of the inlet velocity profile. The overall work is defined by four steps: the inlet velocity profile parametrization, the numerical optimization set-up, the numerical computational fluid dynamics (CFD) draft tube model and the objective function definition. However as the inlet velocity profile is a new challenge, each step of the parametrization must be properly validated. In the first step, a suitable parametrization with an appropriate number of variables is chosen to approximate an experimental draft tube inlet velocity profile. The second step considers the reduction of the actual numerical model to develop the CFD calculations. In the third step, the optimization algorithm set-up is specified. Finally, the objective function is evaluated. As each step is properly validated, it is considered this proved methodology will help to find an inlet velocity profile shape which will be able to suppress or mitigate the undesirable draft tube flow characteristics. [Spanish] Este documento se enfoca en establecer una metodologia de optimizacion para maximizar el rendimiento del tubo de aspiracion en funcion de las condiciones de frontera del aspirador. El metodo es definido en cuatro etapas: la parametrizacion del perfil de velocidades, la evaluacion del algoritmo de optimizacion, la valoracion de la funcion objetivo y la validacion del modelo numerico. La parametrizacion se realiza con un numero de variables apropiado para aproximar el perfil de velocidades experimental. El segundo paso considera establecer los parametros del algoritmo de optimizacion, la funcion objetivo es obtenida mediante un estudio de sensibilidad y el modelo numerico es validado y reducido en la cantidad de elementos para adecuarlo al proceso de optimizacion. Se considera que esta metodologia ayudara a encontrar un perfil de velocidad de entrada el cual reduzca las perdidas de

  6. Thermal efficiency of Duovent array glassing; Eficiencia termica de arreglos de vidrios Duovent

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Garcia G; Cortina Leyva, C; Flores Prieto, Jose J [Centro Nacional de Investigacion y Tecnologico, DGIT SEP, Cuernavaca, Morelos (Mexico)

    2000-07-01

    This paper presents an experimental study of the thermal performance of duovent glazing with different solar control coatings. The thermal efficiency, {eta}, was determined. The duovent array consists of 6 mm glass+solar coating+air layer+6 mm glass. The width of the air layer between the two glasses is 12 mm. The experimental work was carried out using a calorimeter setup calling DEMETEV. The DEMETEV was specially designed to measure the heat gains through sample glassings. The heat flux, the shading coefficients and the thermal efficiency curve as a function of the temperature difference and incident radiative flux are presented. Comparing the results for duovent with clear glasses with the ones reported by Dubrous show a difference of 2.2%. Also this study verifies the theoretical model reported. [Spanish] En este trabajo se presenta un estudio experimental del comportamiento termico de vidrios Duovent con diferentes filtros solares mediante el calculo de la eficiencia termica, {eta}. El arreglo lo comprende vidrio+filtro+aire+vidrio de 6 mm de espesor con un espacio con aire entre vidrios de 12 mm. El trabajo experimental se llevo a cabo haciendo uso del dispositivo calorimetrico experimental, denominado DEMETEV, que fue disenado especialmente para medir las ganancias de calor a traves de vidrios. Se presentan los flujos de calor, los coeficientes de sombreado y la curva de eficiencia termica como funcion de la diferencia de temperaturas y del flujo radioactivo incidente. Los resultados obtenidos para vidrios claros fueron comparados con los que se obtuvieron en el trabajo reportado por Dubrous obteniendo una diferencia del 2.2%. Tambien se presenta la validacion de los datos experimentales con un modelo teorico reportado.

  7. Diamond drilling for nuclear waste QC

    International Nuclear Information System (INIS)

    Jennings, Martin.

    1990-01-01

    Specialised diamond core drilling equipment could soon have a role to play in the safe disposal of intermediate level radioactive waste (ILW). Equipment to core and extract samples for quality checking from cement-filled steel waste drums by techniques compatible with eventual remote-handling operations in a 'hot-cell' is being developed. All coring tests carried out to date have been on simulant waste: 200 litre drums containing mixtures of Ordinary Portland Cement, Ground Granulated Blast Furnace Slag and Pulverised Fuel Ash. No radioactive materials have yet been used for the coring trials. The coring equipment and the diamond coring bits are described. (author)

  8. Proyecto SAFEBUS: Sistemas Avanzados de Seguridad Integral en Autobuses

    Directory of Open Access Journals (Sweden)

    Leopoldo Armesto

    2016-01-01

    Full Text Available Resumen: Es bien conocido a partir de estudios previamente realizados, la elevada accidentabilidad de los autobuses urbanos en situaciones de baja velocidad que hacen más necesarios sistemas de asistencia a la conducción. En este sentido, el artículo describe los resultados obtenidos como consecuencia del desarrollo del proyecto “Sistemas Avanzados de Seguridad Integral en Autobuses” (SAFEBUS. Concretamente, se centra en los aspectos de seguridad exterior del autobús, proponiendo un sistema para las situaciones de baja velocidad, paradas o arrancadas del autobús. En él se describen las ideas conceptuales del proyecto y los subsistemas que lo conforman: sistema de detección de personas y sistema avanzado de asistencia al conductor, incluyendo el diseño de dispositivos de realimentación háptica y audio-visual. Así mismo, se detallan los experimentos y validaciones realizados tras la implantación del mismo en autobuses de la compañía Castrosua S.A., los cuales demuestran la capacidad de alertar al conductor y en caso necesario detenerlo en situaciones de peligro. Abstract: It is well known from previous studies, that accidents of buses in urban scenarios, with low speed profiles, make necessary to introduce driving assistance systems. In this sense, this paper describes the results of the SAFEBUS research project “Sistemas Avanzados de Seguridad Integral en Autobuses”. It focuses in safety aspects proposing a system valid at low speed profiles, basically at bus stops. Here, we describe the main ideas exploited in the project and their results, that is, a people detection system together with a driving assistance system with audiovisual and haptic feedback. We also show some experiments and validations carried out at the facilities of Castrosua S.A. company. Keywords: Advance driving assistance systems, people detection, bus safety, Palabras clave: Sistemas de Seguridad Avanzados

  9. Teledetección de quema de cañaverales en la provincia de Tucumán (Argentina mediante sistema MODIS Sugarcane burning teledetection through MODIS system in Tucumán (Argentina

    Directory of Open Access Journals (Sweden)

    M. Javier Tonatto

    2008-06-01

    Full Text Available En Tucumán, Argentina, una práctica generalizada en el cultivo de la caña de azúcar es la quema de cañaverales previa a la cosecha o la de sus residuos en poscosecha. La Comisión Nacional de Actividades Espaciales (CONAE, ofrece una herramienta para la teledetección de focos de fuego a través de “mapas de focos de calor” generados por los sistemas satelitales TERRA y AQUA MODIS pertenecientes a la NASA. El propósito de este trabajo fue realizar una aplicación de esta información para el registro de focos de fuego en el área cañera de Tucumán, generando una base de datos y estadísticas de la ocurrencia de quema de cañaverales para los períodos de zafra durante los años 2004, 2005 y 2006. Además, se efectuaron validaciones en campo para evaluar su potencial empleo como un sistema de monitoreo de fuegos en áreas agrícolas y otros recursos naturales. En todos los casos, septiembre fue el mes con la mayor ocurrencia de fuegos y Cruz Alta, el departamento con el mayor registro de focos de fuego. Además se observó una tendencia creciente en el uso de la quema previa o posterior a la cosecha.A generalized agricultural practice in Tucumán, Argentina, is pre-harvest sugarcane burning or burning of its post harvest residues. The Comisión Nacional de Actividades Espaciales (CONAE offers a tool for fire ocurrence teledetection using thermal anomalies maps, generated by NASA TERRA and AQUA MODIS satellite systems. This information was used for fire registration on sugarcane cultivation area, generating a database and statistics of sugarcane burning during the harvesting period from 2004 to 2006 in Tucumán. Moreover, an attempt to validate the potential use of this tool as a fire monitoring system in agriculture and natural resources areas was carried out. September was the month with major number of fire occurrences in all considered cases and Cruz Alta was the location with most fire records. The use of pre or post harvest

  10. Mejoramiento genético del frijol rojo y negro mesoamericano para Centroamérica y El Caribe

    Directory of Open Access Journals (Sweden)

    Juan C. Rosas

    2000-01-01

    Full Text Available La producción de frijol en Centroamérica es llevada a cabo mayormente en laderas de suelos marginales, limitada por diversos factores bióticos y abióticos. Más de 350,000 t de este grano se producen en cerca de 0,5 millones de hectáreas, con rendimientos promedios de 678 kg/ha. La mayoría de los productores de frijol utilizan bajos insumos y muy pocas fincas están mecanizadas. El autoconsumo es alto; sin embargo, una alta proporción de este grano es comprado por intermediarios. En Honduras, el frijol es el sétimo cultivo en valor económico y es el de mayor rentabilidad entre el maíz, arroz y sorgo. Las dos clases comerciales más importantes en Centroamérica son el frijol rojo y negro pequeños (raza Mesoamérica. El mejoramiento de estos tipos de frijol se ha enfocado en el desarrollo de resistencia a enfermedades (mosaico común, mosaico dorado, antracnosis, mancha angular, roya, mustia hilachosa y bacteriosis común e insectos (principalmente picudo de la vaina; y tolerancia a baja fertilidad, sequía y calor. Programas adecuados de hibridación, evaluación y selección son usados para el desarrollo de cultivares con resistencia múltiple, alto rendimiento, buena adaptación y aceptación comercial. La ampliación de la base genética se obtiene usando fuentes de germoplasma Andino y Mesoamericano en la etapa de hibridación. La selección simultánea por varios caracteres y pruebas multilocalidades son utilizadas. Los viveros y ensayos de adaptación y rendimiento de líneas avanzadas son distribuídos a países de Centroamérica, México, y El Caribe. Las pruebas y validaciones en fincas y la liberación de variedades, son efectuadas por los programas nacionales de frijol de los países miembros de PROFRIJOL, en colaboración con el Zamorano, CIAT y el Bean/Cowpea CRSP

  11. Auto immunity in the Ovarian Resistance Syndrome: research and methodology development; Autoinmunidad en el Sindrome de Resistencia Ovarica: investigacion y desarrollo de metodologia

    Energy Technology Data Exchange (ETDEWEB)

    Oliver, P; Balter, H; Robles, A

    1998-07-01

    de receptores en el material biologico empleado mediante graficos de Scatchard. En cuanto al control de calidad, se selecciona el estudio de la maxima capacidad de union del ligando al receptor, como uno de los parametros que mayor informacion brinda sobre la performance del mismo. La validacion clinica se efectuo mediante la utilizacion de inmunoglobulinas aisladas a partir del suero de donantes sanos considerados como centrales negativos y de mujeres con SRO confirmada por estudios efectuados en el exterior consideradas como centrales positivas. Todo esto, proporciona el desarrollo de un metodo cualitativo confiable sensible y especifico para la determinacion de anticuerpos antireceptor de FSH de inmediata aplicacion en el area de la salud humana en nuestro medio.

  12. Twelve years of continuous measurements of atmospheric electrical activity in Mexico's Tropical highland

    Energy Technology Data Exchange (ETDEWEB)

    Troncoso Lozada, O. [Centro de Ciencias de la Atmosfera, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

    2004-04-01

    Atmospheric electric activity measurements have been recorded continuously by a punctual lightning system at a tropical highland observatory from 1988 onwards, and were analyzed to obtain lightning statistical confident results for thunderstorms occurrence on the leeward side of the southern mountain ridge of Mexico's Valley. Shown, as examples, are individual profiles of the atmospheric electrical activity, associated with severe storms. The results make clear that the fastest possible sequence of electrical measurements is required to obtain significant and applications oriented data in connection with a whole series of thunderstorms taking into account the mean time variation of the atmospheric electricity measurements at an altitude of 2270 m a.s.l. The seasonal variation indicates that the lightning flash peak currents were found to be larger in summer with less than 10% occurring in the autumn and winter. With rainfall data from a network of 66 stations, we obtained a significant correlation with the lightning frequency. Special attention was undertaken concerning the question of the atmospheric electrical activity and climate at Valley of Mexico. [Spanish] Se midieron ininterrumpidamente las variaciones de la actividad electrica en la atmosfera, de enero de 1988 a diciembre de 1999, en un observatorio de altura (2,250 m s.n.m.), y se analizaron para obtener resultados estadisticos confiables con relacion a la ocurrencia de tormentas en la region sur del Valle de Mexico. Como ejemplos, se muestran los perfiles individuales de la actividad electrica atmosferica asociada con tormentas severas. Los resultados dejan claro que se requiere de la secuencia de medidas electricas lo mas rapida posible para obtener datos significativos y aplicables en relacion con una serie completa de tormentas, considerando la media del tiempo de variacion de las mediciones de la actividad electrica atmosferica a una altitud de 2,270 m s.n.m. La validacion estacional indica que

  13. Control de la calidad y estudio de estabilidad del paracetamol gotas orales 100 mg/ml

    Directory of Open Access Journals (Sweden)

    Caridad M García Peña

    2013-03-01

    Full Text Available Introducción: las gotas orales de Paracetamol, están indicadas a la población infantil hasta los 5 años para el alivio de la fiebre, dolor de cabeza, dolores dentales y proporciona alivio sintomático del resfriado común. Objetivo: validar dos métodos analíticos, para el control de la calidad y el estudio de estabilidad y estudiar la estabilidad de las gotas orales de producción nacional. Métodos: para cuantificar el principio activo para el estudio de estabilidad, la separación se realizó a través de una columna cromatográfica Lichrosorb RP - 18 (5µm (250 x 4 mm, con detección ultravioleta a 243 nm, empleando una fase móvil compuesta por Agua destilada: Metanol (3:1. Mientras que el método para el control de la calidad se utilizó un Espectrofotómetro SPECTRONIC GENESYS 2.Para el estudio de estabilidad, se emplearon los métodos de vida de estante (a temperatura inferior a 30 º C y de estabilidad acelerada (40 ± 2ºC mediante cromatografía líquida de alta eficiencia. Resultados: los resultados obtenidos de los parámetros evaluados en las validaciones se encontraron dentro de los límites establecidos. Los resultados del estudio de estabilidad realizado, demuestran que el producto terminado cumplió con las especificaciones de calidad durante el estudio. Conclusiones: los métodos analíticos por espectrofotometría UV y cromatografía líquida de alta resolución, son válidos para el control de la calidad y estudio de estabilidad de las gotas orales de Paracetamol 100 mg/mL, ya que resultaron lineales, precisos, exactos y específicos. Se demostró la estabilidad física, química y microbiológica del producto por espacio de 12 meses a temperatura inferior a 30 ºC, envasados en frascos de vidrio ámbar por 15 mL, boca 18 mm, calidad hidrolítica III. Además se evidenció que el producto es estable durante 30 días después de abierto el frasco.

  14. Metodología para elaborar el Plan Maestro de Validación de los procesos de producción del Centro Nacional de Sanidad Agropecuaria Methodology to design the Master Plan of Validation of production processes of National Center of Agricultural Health

    Directory of Open Access Journals (Sweden)

    Nivian Montes de Oca

    2010-06-01

    Full Text Available La metodología para la elaboración del Plan Maestro de Validación de los procesos de producción del Centro Nacional de Sanidad Agropecuaria, se diseñó a partir de los requisitos contenidos en la Regulación 16 del 2006 de Buenas Prácticas de Fabricación de medicamentos. Abarcó la política de la organización para la actividad de validación su estructura organizativa, las instalaciones, sistemas, equipos y procesos que se deben validar; el formato de la documentación a utilizar; la planificación y calendario de cada actividad; los resultados de cada protocolo ejecutado, el control de los cambios que se generan; un resumen de las validaciones anteriores; cumplimiento del plan propuesto; las conclusiones donde se precisan de forma resumida si los procesos validados están bajo control, los resultados más relevantes, así como las acciones correctivas y preventivas a tomar; por último se define la distribución de toda la información generada, conformando así el Plan Maestro de Validación. Este sistema de validación se muestra a través de procedimientos, protocolos y registros aplicados en el proceso de fabricación de Surfacen®, medicamento para uso humano que se fabrica en el Centro Nacional de Sanidad Agropecuaria.The methodology to design the Validation Master Plan the production processes of National Center of Agricultural Health was created from the requirements present in the Regulation 16, 2006 of Good Practices of drugs manufacture including the organization policy for validation activity of its organizing structure, installations, systems, equipments and processes to be validated, documentation format used, planning and calendar of each activity; the results from each protocol performed, the generating changes control, abstract of prior validations, fulfillment of proposed plan, conclusions where are determined in a summarized way if the validated processes are under control, the more relevant results, as well as how

  15. Microscale adaptation of the potentiometric method with ion-selective electrode for the quantification of fluoride; Adaptacion a microescala del metodo potenciometrico con electrodo ion selectivo para la cuantificacion de fluoruro

    Energy Technology Data Exchange (ETDEWEB)

    Guevara Ruiz, Paulina; Ortiz Perez, Maria Deogracias [Laboratorio de Bioquimica, Facultad de de Medicina, Universidad Autonoma de San Luis Potosi, San Luis Potosi, San Luis Potosi, (Mexico)]. E-mail: mdortiz@uaslp.mx

    2009-05-15

    muestra necesarios, disminuya costo y substancias de desecho. Se valido el metodo potenciometrico establecido en la NMX-AA-077-SCFI-2001, asi como el metodo a microescala propuesto en este trabajo; posteriormente, se compararon ambos metodos mediante graficos y calculos estadisticos. Ademas se analizaron por ambos metodos 125 muestras de agua embotellada de venta en la ciudad de San Luis Potosi. Los datos de la validacion del metodo fueron optimos para su desempeno. Los resultados de la determinacion en las muestras de agua embotellada por ambos metodos, indican que la modificacion a microescala es estadisticamente comparable al metodo potenciometrico con electrodo ion selectivo. El metodo propuesto a microescala es apropiado para su utilizacion, con una reduccion de 95 % en costo y desechos generados.

  16. Seminar on utilization of nuclear techniques in the agricultural research carried out in FONAIAP. Abstracts and lectures; Seminario sobre utilizacion de tecnicas nucleares en la investigacion agropecuaria realizada en el FONAIAP. Resumenes y ponencias

    Energy Technology Data Exchange (ETDEWEB)

    Romero S, Alfredo [ed.; Bracamonte, Magaly [Fondo Nacional de Investigaciones Agropecuarias (FONAIAP), Centro Nacional de Investigaciones Agropecuarias (CENIAP), Maracay (Venezuela)

    1997-07-01

    The lectures included in this seminar are related to: development and evaluation of prophylactic methods to control the anaplasmosis and babesiosis (babesia bovis) in the livestock; the diagnosis of bovine basesiosis (babesia bovis) by means of the test of ELISA; validation of the kit ELISA (FAO, OIEA, PANAFTOSA) to determine antibodies against the virus of the foot and mouth disease; variability generation in sugar cane for resistance to mosaic viruses and rusts (puccinia melanocephala) by means of the cultivation of explants and irradiated callus; bioavailabilty of deposit phosphates in animal feeding; biological fixation of nitrogen in three tropical feed crops leguminous and its transfer to Brachiaria humidicola in association; unit of stable isotopic N{sup 1}5 analysis; effect of the efficiency of N by use of different forms of fertilizer application in ground, evaluated by means of the isotopic technique and the N absorbed by the cultivation; application of progesterone and testosterone in the diagnose and control of reproduction in crossbreeds animal husbandry; advances in the monitoring of production systems in double purpose cattle raising in the area of Guayabal, Guarico State; aquatic investigations with nuclear energy techniques; development of the Venezuelan Edaphological Bibliographic Database. [Spanish] Las ponencias presentadas en este seminario tratan sobre: desarrollo y evaluacion de metodos profilacticos para controlar la anaplasmosis y babesiosis en el ganado; el diagostico de la babesiosis bovina (babesia bovis) mediante la prueba de ELISA; la validacion del kit de ELISA FAO/OIEA/PANAFTOSA para determinar anticuerpos contra el virus de la fiebre aftosa; generacion de variabilidad en cana de azucar para resistencia a mosaico y roya (puccinia melanocephala) mediante el cultivo de explantes y callos irradiados; biodisponibilidad de fosfatos de yacimientos en la alimentacion animal; fijacion biologica de nitrogeno en tres leguminosas forrajeras

  17. Methodology of thermalhydraulic tests of fuel assemblies for WWER-1000

    International Nuclear Information System (INIS)

    Archipov, A.; Kolochko, V.N.

    2001-01-01

    At present 11 units with WWER-1000 are in operation in Ukraine. The NPPs are provided with nuclear fuel from Russia. The fuel assemblies are fabricated and delivered to Ukrainian NPPs from Russia. However the contemporary tendencies of nuclear energy development in the world assume a diversification of nuclear fuel vendors. Therefore the creation of the own nuclear fuel cycle of Ukraine is in mind in the strategy of nuclear energy development of Ukraine. As a part of the fuel assemblies fabrication process complex of the thermalhydraulic tests should be carried out to confirm design characteristics of the fuel assemblies before they are loaded in the reactor facility. The experimental basis and scientific infrastructure for the thermalhydraulic tests arrangement and realization of the programs and procedures for the core equipment examination are under consideration. (author)

  18. Nuclear Data Center International Standard Towards TSO Initiative

    International Nuclear Information System (INIS)

    Raja Murzaferi Raja Moktar; Mohd Fauzi Haris; Siti Nurbahyah Hamdan

    2011-01-01

    Nuclear Data Center is the main facility for Nuclear Malaysia Agency IT infrastructure comprising of main critical servers, research and operational data storage, HPC-clusters system and vital network core equipment. In recent years, international body such as TIA-Telecommunication Industry Association and Up time Institute have came out with proper international data center standards in order to ensure data center operation on achieving maximum operational up time and minimal downtime. The standard are currently being rated as tier level ranging from Data Center tier I up to tier IV, differentiate by facility standard and up time/ downtime percentage ratio. This paper will discuss Nuclear Data Center adopting international standards in supporting Nuclear Malaysia TSO initiative thus ensuring the critical core component of agency IT services availability and further more International standard recognitions. (author)

  19. The influence of coring method on the preservation of sedimentary and biogeochemical features when sampling soft-bottom, shallow coastal environments

    DEFF Research Database (Denmark)

    Mogg, Andrew O.M.; Attard, Karl M.; Stahl, Henrik

    2017-01-01

    It is frequently assumed that taking samples of soft marine sediments using surface-based gravity coring equipment causes minimal disruption to their sedimentological, biogeochemical, and biological condition. This assumption was evaluated by examining the potential disturbances caused when...... resuspension or compression during gravity coring. Using SCUBA for shallow-water soft-sediment sampling permits steady and controlled core-tube insertion and extraction, and more measured retrieval of the cores to the surface; this probably accounts for the observed differences. Whereas benthic lander......-based in situ measurement would be the preferred method for analyzing sediment parameters in detail in this type of environment, SCUBA-based sampling offers a more accurate alternative to surface-based gravity coring....

  20. In-situ rock melting applied to lunar base construction and for exploration drilling and coring on the moon

    International Nuclear Information System (INIS)

    Rowley, J.C.; Neudecker, J.W.

    1984-01-01

    An excavation technology based upon melting of rock and soil has been extensively developed at the prototype hardware and conceptual design levels for terrestrial conditions. Laboratory and field tests of rock-melting penetration have conclusively indicated that this excavation method is insensitive to rock, soil types, and conditions. Especially significant is the ability to form in-place glass linings or casings on the walls of boreholes, tunnels, and shafts. These factors indicate the unique potential for in situ construction of primary lunar base facilities. Drilling and coring equipment for resource exploration on the moon can also be devised that are largely automated and remotely operated. It is also very likely that lunar melt-glasses will have changed mechanical properties when formed in anhydrous and hard vacuum conditions. Rock melting experiments and prototype hardware designs for lunar rock-melting excavation applications are suggested

  1. Nursing diagnoses validated in cardiology in Brazil: integrative literature review Diagnósticos de enfermería validados en cardiología en el Brasil: revisión integrativa de literatura Diagnósticos de enfermagem validados em cardiologia no Brasil: revisão integrativa de literatura

    Directory of Open Access Journals (Sweden)

    Camila Takáo Lopes

    2012-01-01

    Full Text Available OBJECTIVE: To identify nursing diagnoses (ND currently appearing in the NANDA-I taxonomy, validated in the area of cardiology in Brazil. METHODS: An integrative literature review, guided by the following question: what nursing diagnoses were validated in Brazil? Eleven works were analyzed: three content validations and eight clinical validations. RESULTS: The NDs validated were: activity intolerance, decreased cardiac output, spiritual distress, deficient knowledge, excessive fluid volume, ineffective airway clearance, ineffective peripheral tissue perfusion, fear, anxiety, and pain. The highlights were the production of the graduate programs in public institutions, the validation of defining characteristics, models of validation and the modified Fehring criteria for selection of experts . The clinical validation model was used for NDs of the psychobiological sphere; the content validation model was used mainly for NDs in the psychosocial and psychospiritual spheres. CONCLUSION: The knowledge produced can provide a basis for future studies on the relevance of the content of nursing outcomes in the evaluation of the effectiveness of nursing interventions in the country.OBJETIVO: Identificar diagnósticos de enfermería (DEs que se encuentran actualmente en la taxonomía de la NANDA, validados en el área de Cardiología en el Brasil. MÉTODOS: Revisión integrativa de literatura, orientada por la siguiente pregunta:qué diagnósticos de enfermería fueron validados en el Brasil. Fueron analizados 11 trabajos: tres validaciones de contenido y ocho validaciones clínicas. RESULTADOS: Los DEs validados fueron Intolerancia a la Actividad, Débito Cardiaco Disminuído, Angustia Espiritual, Conocimiento deficiente, Volumen Excesivo de Líquidos, Desobstrucción Ineficaz de Vías Aéreas, Perfusión Tisular Periférica Ineficaz, Miedo, Ansieda y dolor. Se destacaron la producción del Postgrado de instituciones públicas, la validación de las caracter

  2. Calculation of sensitivities in electrical systems with SIFLETCA devices; Calculo de sensibilidades en sistemas electricos con dispositivos SIFLETCA

    Energy Technology Data Exchange (ETDEWEB)

    Rubio Marroquin, Gabriel Omar

    2004-03-15

    de potencia (CUFP). Ademas, se desarrolla en esta tesis las ecuaciones utilizadas en el Jacobiano del metodo Newton-Raphson, para resolver flujos de potencia incluyendo los dispositivos SIFLETCA. Se muestra diferentes aplicaciones que se tienen al instalar un dispositivo, tales como prevencion de flujos en anillo, barrera electronica, incremento en la capacidad de transmision y especificacion del flujo de potencia en lineas de transmision. Por otra parte, se desarrolla en la tesis un analisis de sensibilidades de un sistema de potencia en estado estacionario. Tambien se proponen en la tesis los parametros de control para los cuales se calcula las sensibilidades. Asimismo, se utiliza un indice de desempeno para medir el grado de congestion de un sistema electrico. Al calcular las sensibilidades se utiliza los resultados obtenidos de los flujos de potencia. Se usa 4 redes electricas para encontrar donde se debe situar cada dispositivo SIFLETCA para reducir la congestion en el sistema. Tambien, se compara el metodo desarrollado en la tesis con un metodo de sensibilidades que emplea flujos de CD para validacion y mostrar las ventajas de usar el metodo Newton en flujos de potencia.

  3. Aplicação da Liderança Situacional na enfermagem de centro cirúrgico Aplicación del Liderazgo Situacional en la enfermería de centro quirúrgico Use of the Situational Leadership in surgical center nursing

    Directory of Open Access Journals (Sweden)

    Marcos Antonio da Silva

    2007-03-01

    Full Text Available O presente estudo teve como objetivos identificar a correspondência de opiniões entre o enfermeiro de centro cirúrgico e a equipe de enfermagem em relação ao estilo de liderança exercido pelo enfermeiro, e o estilo de liderança que este profissional deveria adotar em relação ao nível de maturidade do liderado. Para alcançar os objetivos propostos, selecionamos a Liderança Situacional como referencial teórico e elaboramos instrumentos que foram submetidos a validações, aparente e de conteúdo. Os instrumentos foram aplicados em quinze enfermeiros, dois técnicos e treze auxiliares de enfermagem. Os resultados evidenciaram que o estilo de liderança mais exercido pelo enfermeiro foi o E3 (compartilhar. Quanto ao estilo de liderança que o enfermeiro deveria adotar em relação ao nível de maturidade do liderado, diante de atividades desenvolvidas na sala de operações, houve predomínio do estilo E4 (delegar, sugerindo que os liderados pesquisados apresentavam nível de maturidade alto (M4.En el presente estudio se tuvo como objetivos identificar la correspondencia de opiniones entre el enfermero de centro quirúrgico y el equipo de enfermería en relación al estilo de liderazgo ejercido por el enfermero y el estilo de liderazgo que este profesional debería adoptar en relación al nivel de madurez del liderado. Para alcanzar los objetivos propuestos, seleccionamos el Liderazgo Situacional como referencial teórico y elaboramos instrumentos que fueron sometidos a validaciones, aparente y de contenido. Los instrumentos fueron aplicados en quince enfermeros, dos técnicos y trece auxiliares de enfermería. Los resultados evidenciaron que el estilo de liderazgo más ejercido por el enfermero fue el E3 (compartir. En cuanto al estilo de liderazgo que el enfermero debería adoptar en relación al nivel de madurez del liderado, frente a las actividades desarrolladas en la sala de operaciones, hubo predominio del estilo E4 (delegar

  4. Energy efficiency study of the domestic refrigerators inside of a controlled environment laboratory; Estudio de la eficiencia energetica de refrigeradores domesticos dentro de un laboratorio de ambiente controlado

    Energy Technology Data Exchange (ETDEWEB)

    Arroyo Cabanas, Fernando Gabriel

    2004-04-15

    se estudio el parque de refrigeradores domesticos empleados en Mexico (marcas, eficiencia y consumo electrico) con el objetivo de evaluar el consumo de energia electrica en los refrigeradores a nivel nacional. Ya con el consumo determinado, se propone un programa gubernamental para la sustitucion acelerada del parque de refrigeradores domesticos de mayor antiguedad, por modelos de mayor eficiencia energetica. Enseguida, se realiza la caracterizacion del Laboratorio de Ambiente Controlado (pruebas preliminares de estabilidad termica y perdidas de calor) para obtener las condiciones termicas marcadas por la Norma NOM-015-2002. Asimismo se establecen puntos relevantes para el analisis energetico experimental en refrigeradores domesticos conforme a la norma NOM-015-2002. Por ultimo, se propondra un protocolo de pruebas para refrigeradores domesticos aplicado en el LAC con base en dicha norma y se llevara a cabo la validacion de este mediante la realizacion de las pruebas experimentales necesarias y los calculos requeridos. Finalmente se presentan los resultados obtenidos de las pruebas de eficiencia energetica aplicadas a diferentes modelos de refrigeradores domesticos, asi como conclusiones.

  5. Analysis and evaluation of the main factors that influence the growing of the electrical power consumption in the national electrical sector, period 2000-2005; Analisis y evaluacion de los principales factores que influyen en el crecimiento del consumo de energia electrica en el sector electrico nacional, periodo 2000-2005

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar Luna, Luis Miguel

    2008-06-15

    de potencia (CUFP). Ademas, se desarrolla en esta tesis las ecuaciones utilizadas en el Jacobiano del metodo Newton-Raphson, para resolver flujos de potencia incluyendo los dispositivos SIFLETCA. Se muestra diferentes aplicaciones que se tienen al instalar un dispositivo, tales como prevencion de flujos en anillo, barrera electronica, incremento en la capacidad de transmision y especificacion del flujo de potencia en lineas de transmision. Por otra parte, se desarrolla en la tesis un analisis de sensibilidades de un sistema de potencia en estado estacionario. Tambien se proponen en la tesis los parametros de control para los cuales se calcula las sensibilidades. Asimismo, se utiliza un indice de desempeno para medir el grado de congestion de un sistema electrico. Al calcular las sensibilidades se utiliza los resultados obtenidos de los flujos de potencia. Se usa 4 redes electricas para encontrar donde se debe situar cada dispositivo SIFLETCA para reducir la congestion en el sistema. Tambien, se compara el metodo desarrollado en la tesis con un metodo de sensibilidades que emplea flujos de CD para validacion y mostrar las ventajas de usar el metodo Newton en flujos de potencia.

  6. Aplicación de la minería de datos al Sistema Cubano de Farmacovigilancia Application of data mining to the Cuban Pharmacovigilance System

    Directory of Open Access Journals (Sweden)

    Omar Calzadilla Fernández de Castro

    2007-12-01

    Full Text Available En el año 1999, se crea la Unidad Nacional Coordinadora de Farmacovigilancia, la cual funciona como el órgano técnico-científico que desarrolla la política de vigilancia de seguridad de medicamentos del Ministerio de Salud Pública e integra las actividades de los centros provinciales y de otros programas concertados de farmacovigilancia en un sistema único. Entre sus funciones más relevantes se encuentran la de definir, diseñar y desarrollar los sistemas de información; administrar la base de datos nacional; depurar y validar la información contenida en ella; y realizar y coordinar estudios científicos sobre la seguridad de los medicamentos; así como elaborar informes para las autoridades sanitarias y el Sistema Nacional de Salud. En este sistema existe la necesidad de utilizar herramientas de análisis, por lo que se trazó el objetivo de definir, diseñar y desarrollar los sistemas de tratamiento de la información y administrar la base de datos nacional "VigiBaseCuba". Aplicando una serie de transformaciones, validaciones y la adecuación de la metodología CRISP-DM para la elaboración de proyectos de minería de datos, se conformó la base de datos nacional, en un sistema de gestión de bases de datos relacional con los registros de las notificaciones de sospechas de reacciones adversas a los medicamentos y un proceso de descubrimiento de conocimiento que permite gestionar eficazmente la seguridad de los medicamentos, así como desarrollar aplicaciones para la visualización de las señales de reacciones adversas y su evoluciónIn 1999, The National Coordinating Unit of Pharmacovigilance was created. It works as a scientific and technical agency that develops the drug safety surveillance policy of the Ministry of Public Health, and integrates the activities of the provincial centres and other pharmacovigilance programs in a unique system. Some of its most important functions are to define, design and develop the information

  7. Monitor de eventos electrocardiacos implementado en plataforma PDA Monitor of cardiac events implemented in PDA platform

    Directory of Open Access Journals (Sweden)

    John Bustamante

    Full Text Available El monitoreo ambulatorio de eventos electrocardiacos es una herramienta valiosa en el diagnóstico de arritmias cardiacas, involucradas en procesos patológicos como miocardiopatías, estadios post-infarto, lesiones del sistema autónomo cardiaco, etc.; infortunadamente aún no es posible su uso extensivo debido a los altos costos que implica la adquisición de estos equipos. Con este propósito, se diseña y desarrolla mediante el uso de asistentes digitales personales, un monitor de eventos cardiacos con capacidad de grabación pre-sintomática y post-sintomática, visualización de señal electrocardiográfica en tiempo real, grabación automática de bradicardias y taquicardias, y posibilidad de anotación de síntomas por parte del paciente. Para ello se desarrolló un componente de hardware para la adquisición y tratamiento de las señales, un software para el monitoreo en plataforma Palm OS® y una aplicación para la descarga y análisis de los datos almacenados. Las validaciones del prototipo se realizaron mediante un simulador electrocardiográfico, un simulador de arritmias basado en registros de la base de datos de arritmias del Massachusetts Institute of Technology y Beth Israel Hospital, y pruebas piloto con personas sanas y pacientes con arritmias. En este reporte preliminar se enseña cómo el prototipo desarrollado, constituye una alternativa viable para el monitoreo ambulatorio de arritmias aprovechando las capacidades de almacenamiento, procesamiento y visualización con que cuentan los asistentes digitales actuales, con la ventaja adicional de que su uso no está restringido a una sola utilidad y su accesibilidad económica se facilita debido a su amplia disponibilidad comercial.Ambulatory monitoring of electro-cardiac events constitutes a valuable tool in the diagnosis of cardiac arrhythmias involved in pathologic processes such as myocardiopathies, post-infarction stages, autonomous cardiac system injuries, etc

  8. Evaluating extinction in rare habitats: an essay

    Directory of Open Access Journals (Sweden)

    Camacho, A. I.

    2003-12-01

    , pero muy pocas responsabilidades, aparte de la éticas o morales suelen afectar a estimas o validaciones defectuosas de Biodiversidad. Sin embargo, muchas decisiones políticas en relación a la conservación de especies y habitats, que en muchos casos implican poderosos intereses económicos, dependen precisamente de la fiabilidad de los estudios de biodiversidad. Obtener una información buena y fiable no es siempre fácil y explica, en parte, el éxito de voces críticas como Simon (1998 o Lomborg (2001. En este trabajo revisamos uno de los problemas de estimación en un habitat especialmente difícil, el medio subterráneo acuático. La carencia de información periódica y la escasez de esta fauna, debido principalmente a las dificultades de acceso a su habitat, son los principales problemas que hemos encontrado al tratar de aplicar análisis PVA (Populations Viability Analysis. No obstante, a pesar de la escasez de datos consistentes, este análisis pone de manifiesto la necesidad de entender mejor la estructura del habitat subterráneo, en lo que respecta a la distribución de su fauna y la necesidad de realizar más muestreos y de realizarlos con mayor regularidad.

  9. Development of a lyophilized formulation for the preparation of radiopharmaceutical 68Ga-DOTA-E-[c(RGDfK)]2 for the diagnosis of breast cancer tumors

    International Nuclear Information System (INIS)

    Terron A, E. J.

    2015-01-01

    Radiopharmaceuticals of third generation by its design that includes peptides capable of selectively directing the radiation to a specific molecular target are useful in molecular medicine for obtaining molecular images that allow recording in vivo phenomena temporal-space of molecular or cellular processes, with diagnostic or therapeutic applications. Generally, peptides that recognize cellular receptors that are over-expressed in cancer cells of interest are used; such is the case of RGD (arginine-glycine-aspartic acid) a tri-peptide sequence which recognizes to the membrane receptors α(v)β(3) and α(v)β(5) that are involved in metastasis and angiogenic processes as well as in tumor cells of breast glioma. The high affinity and selectivity of RGD peptide with integrin s α(v)β(3) and α(v)β(5) is the basis for designing radiopharmaceuticals for diagnostic of breast cancer and the metastasis and angiogenic processes. In this paper a useful lyophilized formulation was development for obtaining 68 Ga-DOTA-E-[c(RGDfK)] 2 radiopharmaceutical that for its effectiveness, stability and security can be used in humans. The production process of core-equipment DOTA-E-[c(RGDfK] 2 /Buffer sodium acetate 1.0 M was optimized, and the formulation was transferred to the radiopharmaceuticals production plant of the Instituto Nacional de Investigaciones Nucleares (ININ). The optimized formulation of the core-equipment for the 68 Ga-DOTA-E-[c(RGDfK)] 2 radiopharmaceutical preparation is: DOTA-E-[c(RGDfK)] 2 peptide - 75 μg; Mannitol - 50 mg; Sodium acetate - 14 mg; Sodium acetate buffer 1.0 M ph 4.3 - 0.5 m L. The production process was validated and stability studies were carried out to the validation batches in compliance with the validation master plan of the ININ and in adherence to compliance of the applicable national and international regulations. Also the legal dossier was drawn up in order to make the application of sanitary registration before Comision Federal para

  10. Development of a lyophilized formulation for the preparation of radiopharmaceutical {sup 68}Ga-DOTA-E-[c(RGDfK)]{sub 2} for the diagnosis of breast cancer tumors; Desarrollo de una formulacion liofilizada para la preparacion del radiofarmaco {sup 68}Ga-DOTA-E-[c(RGDfK)]{sub 2} para el diagnostico de tumores de cancer de mama

    Energy Technology Data Exchange (ETDEWEB)

    Terron A, E. J.

    2015-07-01

    Radiopharmaceuticals of third generation by its design that includes peptides capable of selectively directing the radiation to a specific molecular target are useful in molecular medicine for obtaining molecular images that allow recording in vivo phenomena temporal-space of molecular or cellular processes, with diagnostic or therapeutic applications. Generally, peptides that recognize cellular receptors that are over-expressed in cancer cells of interest are used; such is the case of RGD (arginine-glycine-aspartic acid) a tri-peptide sequence which recognizes to the membrane receptors α(v)β(3) and α(v)β(5) that are involved in metastasis and angiogenic processes as well as in tumor cells of breast glioma. The high affinity and selectivity of RGD peptide with integrin s α(v)β(3) and α(v)β(5) is the basis for designing radiopharmaceuticals for diagnostic of breast cancer and the metastasis and angiogenic processes. In this paper a useful lyophilized formulation was development for obtaining {sup 68}Ga-DOTA-E-[c(RGDfK)]{sub 2} radiopharmaceutical that for its effectiveness, stability and security can be used in humans. The production process of core-equipment DOTA-E-[c(RGDfK]{sub 2}/Buffer sodium acetate 1.0 M was optimized, and the formulation was transferred to the radiopharmaceuticals production plant of the Instituto Nacional de Investigaciones Nucleares (ININ). The optimized formulation of the core-equipment for the {sup 68}Ga-DOTA-E-[c(RGDfK)]{sub 2} radiopharmaceutical preparation is: DOTA-E-[c(RGDfK)]{sub 2} peptide - 75 μg; Mannitol - 50 mg; Sodium acetate - 14 mg; Sodium acetate buffer 1.0 M ph 4.3 - 0.5 m L. The production process was validated and stability studies were carried out to the validation batches in compliance with the validation master plan of the ININ and in adherence to compliance of the applicable national and international regulations. Also the legal dossier was drawn up in order to make the application of sanitary registration

  11. Impact analysis of tap switch out of step for converter transformer

    Science.gov (United States)

    Hong-yue, ZHANG; Zhen-hua, ZHANG; Zhang-xue, XIONG; Gao-wang, YU

    2017-06-01

    AC transformer load regulation is mainly used to adjust the load side voltage level, improve the quality of power supply, the voltage range is relatively narrow. In DC system, converter transformer is the core equipment of AC and DC power converter and inverter. converter transformer tap adjustment can maintain the normal operation of the converter in small angle range control, the absorption of reactive power, economic operation, valve less stress, valve damping circuit loss, AC / DC harmonic component is also smaller. In this way, the tap switch action is more frequent, and a large range of the tap switch adjustment is required. Converter transformer with a more load voltage regulation switch, the voltage regulation range of the switch is generally 20~30%, the adjustment of each file is 1%~2%. Recently it is often found that the tap switch of Converter Transformers is out of step in Converter station. In this paper, it is analyzed in detail the impact of tap switch out of step for differential protection, overexcitation protection and zero sequence over current protection. Analysis results show that: the tap switch out of step has no effect on the differential protection and the overexcitation protection including the tap switch. But the tap switch out of step has effect on zero sequence overcurrent protection of out of step star-angle converter transformer. The zero sequence overcurrent protection will trip when the tap switch out of step is greater than 3 for out of step star-angle converter transformer.

  12. A novel synthetic test system for thyristor level in the converter valve of HVDC power transmission

    Directory of Open Access Journals (Sweden)

    Liu Longchen

    2016-01-01

    Full Text Available The converter valve is the core equipment in the HVDC power transmission system, a+-nd its performance has a direct effect on the reliability, stability and efficiency of the whole power system. As the basic unit of HVDC converter valve, the thyristor level needs to be test routinely in order to grasp the state of the converter valve equipment. Therefore, it is urgent to develop a novel synthetic test system for the thyristor level with thyristor control unit (TCU. However, currently there is no specific test scheme for the thyristor level of HVDC converter valve. In this paper, the synthetic test principle, content and methods for the thyristor level with TCU are presented based on the analysis of the thyristor reverse recovery characteristic and the IEC technology standard. And a transient high-voltage pulse is applied to the thyristor level during its reverse recovery period in order to test the characteristics of thyristor level. Then, the synthetic test system for the thyristor level is applied to the converter valve test of ±800 kV HVDC power transmission project, and the practical test result verifies the reasonability and validity of the proposed synthetic test system.

  13. Numerical Simulation of Fluidized Bed Gasifier for Integrated Gasification Combined Cycle

    Directory of Open Access Journals (Sweden)

    CHEN Ju-hui

    2017-06-01

    Full Text Available The overall thermal efficiency of the integrated gasification combined cycle ( IGCC has not been sufficiently improved. In order to achieve higher power generation efficiency,the advanced technology of IGCC has been developed which is on the basis of the concept of exergy recovery. IGCC systems and devices from the overall structure of opinion,this technology will generate electricity for the integration of advanced technology together,the current utilization of power generation technology and by endothermic reaction of steam in the gasifier,a gas turbine exhaust heat recovery or the solid oxide fuel cell. It is estimated that such the use of exergy recycling has the advantage of being easy to use,separating,collecting fixed CO2,making it very attractive,and can increase the overall efficiency by 10% or more. The characteristics of fluidized bed gasifier,one of the core equipment of the IGCC system,and its effect on the whole system were studied.

  14. An approach to evaluate the cutting time for the nuclear dismantling simulation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jonghwan; Hyun, Dongjun; Kang, Sinyoung; Kim, Ikjune; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Nuclear power plant (NPP) decommissioning involves various processes and technologies. Decommissioning should be performed after a comprehensive review of the information related to these processes and technologies. There are various means of prior examination and evaluation to ensure the feasibility and safety of the decommissioning process plan. Our dismantling simulation system aims to simulate and evaluate whole processes related to the dismantlement of core equipment of NPP such as the device preparation, cutting operation, waste transfer, and so on. This paper introduces the estimation methodology of the time required for the cutting processes based on real cutting conditions in order to provide effective economic evaluation functionalities used for the system. The methodology to estimate the time required for the remote cutting process in the nuclear dismantling simulation system was proposed. Among the factors which mainly determine the time, the cutting trace was directly calculated from the simulation system and the continuous cutting speed was obtained by proper order of the spline fitting with constraint conditions.

  15. Experimental study on hollow structural component by explosive welding

    Energy Technology Data Exchange (ETDEWEB)

    Duan, Mianjun, E-mail: dmjwl@163.com [PLA University of Science and Technology, Nanjing 210007 (China); Wei, Ling, E-mail: 386006087@qq.com [Tongda College, Nanjing University of Posts and Telecommunication, Nanjing 210007 (China); Hong, Jin [PLA University of Science and Technology, Nanjing 210007 (China); Ran, Hong [Southwestern Institute of Physics, Chengdu 610041 (China); Ma, Rui; Wang, Yaohua [PLA University of Science and Technology, Nanjing 210007 (China)

    2014-12-15

    Highlights: • This paper relates to a study on a thin double-layers hollow structural component by using an explosive welding technology. • This thin double-layer hollow structural component is an indispensable component required for certain core equipment of thermonuclear experimental reactor. • An adjusted explosive welding technology for manufacturing an inconel625 hollow structural component was developed which cannot be made by common technology. • The result shows that a metallurgical bonding was realized by the ribs and slabs of the hollow sheet. • The shearing strength of bonding interface exceeds that of the parent metal. - Abstract: A large thin-walled hollow structural component with sealed channels is required for the vacuum chamber of a thermonuclear experimental reactor, with inconel625 as its fabrication material. This hollow structural component is rarely manufactured by normal machining method, and its manufacture is also problematic in the field of explosive welding. With this in mind, we developed an adjusted explosive welding technology which involves a two-step design, setting and annealing technology. The joints were evaluated using optical microscope and scanning electron microscope, and a mechanical experiment was conducted, involving micro-hardness test, cold helium leak test and hydraulic pressure test. The results showed that a metallurgical bonding was realized by the ribs and slabs, and the shearing strength of the bonding interface exceeded that of the parent metal. Hence, the hollow structural component has a good comprehensive mechanical performance and sealing property.

  16. Research on position and orientation measurement method for roadheader based on vision/INS

    Science.gov (United States)

    Yang, Jinyong; Zhang, Guanqin; Huang, Zhe; Ye, Yaozhong; Ma, Bowen; Wang, Yizhong

    2018-01-01

    Roadheader which is a kind of special equipment for large tunnel excavation has been widely used in Coal Mine. It is one of the main mechanical-electrical equipment for mine production and also has been regarded as the core equipment for underground tunnel driving construction. With the deep application of the rapid driving system, underground tunnel driving methods with higher automation level are required. In this respect, the real-time position and orientation measurement technique for roadheader is one of the most important research contents. For solving the problem of position and orientation measurement automatically in real time for roadheaders, this paper analyses and compares the features of several existing measuring methods. Then a new method based on the combination of monocular vision and strap down inertial navigation system (SINS) would be proposed. By realizing five degree-of-freedom (DOF) measurement of real-time position and orientation of roadheader, this method has been verified by the rapid excavation equipment in Daliuta coal mine. Experiment results show that the accuracy of orientation measurement is better than 0.1°, the standard deviation of static drift is better than 0.25° and the accuracy of position measurement is better than 1cm. It is proved that this method can be used in real-time position and orientation measurement application for roadheader which has a broad prospect in coal mine engineering.

  17. Experimental study on hollow structural component by explosive welding

    International Nuclear Information System (INIS)

    Duan, Mianjun; Wei, Ling; Hong, Jin; Ran, Hong; Ma, Rui; Wang, Yaohua

    2014-01-01

    Highlights: • This paper relates to a study on a thin double-layers hollow structural component by using an explosive welding technology. • This thin double-layer hollow structural component is an indispensable component required for certain core equipment of thermonuclear experimental reactor. • An adjusted explosive welding technology for manufacturing an inconel625 hollow structural component was developed which cannot be made by common technology. • The result shows that a metallurgical bonding was realized by the ribs and slabs of the hollow sheet. • The shearing strength of bonding interface exceeds that of the parent metal. - Abstract: A large thin-walled hollow structural component with sealed channels is required for the vacuum chamber of a thermonuclear experimental reactor, with inconel625 as its fabrication material. This hollow structural component is rarely manufactured by normal machining method, and its manufacture is also problematic in the field of explosive welding. With this in mind, we developed an adjusted explosive welding technology which involves a two-step design, setting and annealing technology. The joints were evaluated using optical microscope and scanning electron microscope, and a mechanical experiment was conducted, involving micro-hardness test, cold helium leak test and hydraulic pressure test. The results showed that a metallurgical bonding was realized by the ribs and slabs, and the shearing strength of the bonding interface exceeded that of the parent metal. Hence, the hollow structural component has a good comprehensive mechanical performance and sealing property

  18. Aging management and preventive maintenance for nuclear power plants

    International Nuclear Information System (INIS)

    Bessho, Toichi; Sagawa, Wataru; Oyamada, Osamu; Uchida, Shunsuke

    1995-01-01

    It is expected that nuclear power generation will bear main electric power supply for long term. For this purpose, by applying proper preventive maintenance to the nuclear power plants in operation, the maintenance of high reliability and the rate of plant operation is extremely important. Especially it has been strongly demanded to execute efficiently the periodic inspection which is carried out every year to shorten its period and increase the rate of operation, and to maintain the reliability by the proper maintenance for the aged plants with long operation years. As to efficient and short periodic inspection, the preparation is advanced by the guidance of electric power companies aiming at realizing it in nearest fiscal year, and further, effort is exerted for the development of technology in long term to optimize periodic inspection. For securing the reliability of aged plants, it is important to do proper inspection and diagnosis and to take the countermeasures by repair and replacement, based on the grasp of secular change mechanism and the evaluation of life of machinery, equipment and materials. In particular, effort is exerted for the development of maintenance technology for reactor pressure vessels and in-core equipment which are hard to access. The confirmation of the function of remote operation equipment and the establishment of execution condition are carried out by uisng the full scale mock-up of BWR plant. The problems in maintenance service and the activities and results of reliability improvement are reported. (K.I.)

  19. Low Cost, Lightweight Gravity Coring and Improved Epoxy Impregnation Applied to Laminated Maar Sediment in Vietnam

    Directory of Open Access Journals (Sweden)

    Jan P. Schimmelmann

    2018-05-01

    Full Text Available In response to the need for lightweight and affordable sediment coring and high-resolution structural documentation of unconsolidated sediment, we developed economical and fast methods for (i recovering short sediment cores with undisturbed topmost sediment, without the need for a firmly anchored coring platform, and (ii rapid epoxy-impregnation of crayon-shaped subcores in preparation for thin-sectioning, with minimal use of solvents and epoxy resin. The ‘Autonomous Gravity Corer’ (AGC can be carried to remote locations and deployed from an inflatable or makeshift raft. Its utility was tested on modern unconsolidated lacustrine sediment from a ~21 m deep maar lake in Vietnam’s Central Highlands near Pleiku. The sedimentary fabric fidelity of the epoxy-impregnation method was demonstrated for finely laminated artificial flume sediment. Our affordable AGC is attractive not only for work in developing countries, but lends itself broadly for coring in remote regions where challenging logistics prevent the use of heavy coring equipment. The improved epoxy-impregnation technique saves effort and costly chemical reagents, while at the same time preserving the texture of the sediment.

  20. Method of repairing incore structure and water sealing chamber

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Toshikazu; Sato, Sukenobu (Hitachi Nuclear Engineering Co. Ltd., Ibaraki (Japan)); Wada, Noriaki; Kurosawa, Koichi; Tsujimura, Hiroshi; Enomoto, Kunio.

    1993-11-26

    An incore-chamber main body comprises a guide tube, an insertion guide, an extensible arm, a device fixing mechanism, a gas supply pipe, a guide driving mechanism and an in-core chamber control device. The in-core chamber main body is installed and secured to an upper flange surface of a shroud. Reactor water is raised to a level below a flange of a reactor pressure vessel while supplying a dry gas from a gas supply pipe to make the inside of the shroud as a gas atmosphere. Subsequently, each of the devices is attached to the top end of the extensible arm, and the guide driving mechanism is operated by the in-core chamber control device to an aimed position for preventive maintenance or repair to conduct positioning and fixing by utilizing the guide tube and the insertion guide. This enables to conduct preventive maintenance or repair in a state where reactor water is present to the outside of the in-core reactor chamber while maintaining the in-core equipment in the gas atmosphere, thereby enabling to reduce operator's exposure dose. (I.N.).

  1. Analysis and optimization of dynamic model of eccentric shaft grinder

    Science.gov (United States)

    Gao, Yangjie; Han, Qiushi; Li, Qiguang; Peng, Baoying

    2018-04-01

    Eccentric shaft servo grinder is the core equipment in the process chain of machining eccentric shaft. The establishment of the movement model and the determination of the kinematic relation of the-axis in the grinding process directly affect the quality of the grinding process, and there are many error factors in grinding, and it is very important to analyze the influence of these factors on the work piece quality. The three-dimensional model of eccentric shaft grinder is drawn by Pro/E three-dimensional drawing software, the model is imported into ANSYS Workbench Finite element analysis software, and the finite element analysis is carried out, and then the variation and parameters of each component of the bed are obtained by the modal analysis result. The natural frequencies and formations of the first six steps of the eccentric shaft grinder are obtained by modal analysis, and the weak links of the parts of the grinder are found out, and a reference improvement method is proposed for the design of the eccentric shaft grinder in the future.

  2. Exploring crosstalk noise generated in the N-port router used in the WDM-based ONoC

    Science.gov (United States)

    Zhang, Zhendong; Xie, Yiyuan; Song, Tingting; He, Chao; Li, Jiachao; Liu, Yong

    2017-07-01

    Compared with optical network-on-chip (ONoC) with single wavelength, ONoC adopting wavelength division multiplexing (WDM) technology possesses a very prominent advantage-higher bandwidth. Therefore, WDM-based ONoC has been considered one of the most promising ways to relieve the rapidly increasing traffic load in communication systems. A WDM-based router, as the core equipment of WDM-based ONoC, is influenced by crosstalk noise, especially the nonlinear crosstalk noise generated by the four-wave mixing effect. Thus, to explore the performance of the N-port nonblocking optical router using WDM, we propose a universal analytic model to analyze the transmission loss, crosstalk noise, optical signal-to-noise ratio (OSNR), and bit error ratio (BER). The research results show that crosstalk noise varies along with signals at different wavelengths in the same channel. For signals with the same wavelength, the noises generated in the different transmission paths are obviously different from each other. For research of transmission loss, OSNR, and BER, similar results can be obtained. Based on the eye diagrams, we can learn that crosstalk noise will cause signal distortion to a certain extent. With this model, capability of this kind of multiport optical router using WDM can be understood conveniently.

  3. FCC riser quick separation system: a review

    Directory of Open Access Journals (Sweden)

    Zhi Li

    2016-10-01

    Full Text Available Abstract The riser reactor is the key unit in the fluid catalytic cracking (FCC process. As the FCC feedstocks become heavier, the product mixture of oil, gas and catalysts must be separated immediately at the outlet of the riser to avoid excessive coking. The quick separation system is the core equipment in the FCC unit. China University of Petroleum (Beijing has developed many kinds of separation system including the fender-stripping cyclone and circulating-stripping cyclone systems, which can increase the separation efficiency and reduce the pressure drop remarkably. For the inner riser system, a vortex quick separation system has been developed. It contains a vortex quick separator and an isolated shell. In order to reduce the separation time, a new type of separator called the short residence time separator system was developed. It can further reduce the separation time to less than 1 s. In this paper, the corresponding design principles, structure and industrial application of these different kinds of separation systems are reviewed. A system that can simultaneously realize quick oil gas separation, quick oil gas extraction and quick pre-stripping of catalysts at the end of the riser is the trend in the future.

  4. Method of repairing incore structure and water sealing chamber

    International Nuclear Information System (INIS)

    Kikuchi, Toshikazu; Sato, Sukenobu; Wada, Noriaki; Kurosawa, Koichi; Tsujimura, Hiroshi; Enomoto, Kunio.

    1993-01-01

    An incore-chamber main body comprises a guide tube, an insertion guide, an extensible arm, a device fixing mechanism, a gas supply pipe, a guide driving mechanism and an in-core chamber control device. The in-core chamber main body is installed and secured to an upper flange surface of a shroud. Reactor water is raised to a level below a flange of a reactor pressure vessel while supplying a dry gas from a gas supply pipe to make the inside of the shroud as a gas atmosphere. Subsequently, each of the devices is attached to the top end of the extensible arm, and the guide driving mechanism is operated by the in-core chamber control device to an aimed position for preventive maintenance or repair to conduct positioning and fixing by utilizing the guide tube and the insertion guide. This enables to conduct preventive maintenance or repair in a state where reactor water is present to the outside of the in-core reactor chamber while maintaining the in-core equipment in the gas atmosphere, thereby enabling to reduce operator's exposure dose. (I.N.)

  5. The core pipeline equipment localization process and application prospects in China

    Directory of Open Access Journals (Sweden)

    Zejun Huang

    2014-12-01

    Full Text Available To improve the economic efficiency of gas pipelines, core equipment such as compressor sets and large-diameter valves must be localized. For this purpose, in alliance with other related enterprises, PetroChina Company Limited established an equipment localization R&D system and a new product testing system and successfully developed a 20 MW class motor-driven compressor set, a 30 MW-class gas turbine-driven compressor unit, and a high-pressure and large-diameter welded ball valve. First, the motor-driven compressor R&D focuses on three main units. The developed frequency-control device structure is a cascaded multilevel with a capacity of 25 MVA. The developed anti-explosion dynamo with a motor speed of 4800 rpm can produce a power of 22 MW. The developed compressor is PCL800 with features of a high efficiency and a wide flow-operating point-adjustment range. Second, there are two steps of the R&D of a GT-driven compressor unit (product A + product B: auxiliary supporting systems and control systems are developed for the imported GT25000 gas turbine, together with China-made compressors, to constitute product A; simultaneously, the R&D of product B of a gas turbine is carried out, which would replace the imported one. Third, aiming to solve the problems of sealing and welding, we developed the high-pressure and large-diameter all-welded ball valves in full replace of the same kind of imported products with three different sizes: NPS40 Class 600, NPS48 Class 600, and NPS48 Class 900.

  6. Progress in the development of tooling and dismantling methodologies for the Windscale advanced gas cooled reactor (WAGR)

    International Nuclear Information System (INIS)

    Cross, M.T.; Wareing, M.I.; Dixon, C.

    1998-01-01

    Decommissioning of the Windscale Advanced Gas-Cooled Reactor (WAGR) is a major UK reactor decommissioning project co-funded by the UK Government, the European Commission and Magnox Electric. WAGR was a CO 2 cooled, graphite moderated reactor which served as a test bed for the development of Advanced Gas-Cooled Reactor technology in the UK. It operated from 1963 until shutdown in 1981. AEA Technology plc are currently the Managing Agents on behalf of UKAEA for the WAGR decommissioning project and are responsible for the co-ordination of the project up to the point when the contents of the reactor core and associated radioactive materials are removed and either disposed of or packaged for disposal at some time in the future. Decommissioning has progressed to the point where the reactor has been dismantled down to the level of the hot gas collection manifold with the removal of the top biological shield, the refuelling standpipes and the top section of the reactor pressure vessel. The 4 heat exchangers have also been removed and committed to shallow land burial. This paper describes the work carried out by AEA Technology under separate contracts of UKAEA in developing some of the equipment and deployment methods for the next phase of active operations required in preparation for the dismantling of the core structure. Most recent work has concentrated on the development of specialist tooling for removal of items of operational waste stored within the reactor core, equipment for cutting and removal of the highly radioactive stainless steel 'loop' pressure tubes, diamond wire cutting equipment for sectioning large diameter pipework, and equipment for dismantling the reactor neutron shield. The paper emphasises the process of adaptation and extension of existing technologies for cost-effective application in the decommissioning environment, the need for adequate forward planning of decommissioning methodologies together with large-scale 'mock-up' testing of equipment to

  7. Sampling methods and non-destructive examination techniques for large radioactive waste packages

    International Nuclear Information System (INIS)

    Green, T.H.; Smith, D.L.; Burgoyne, K.E.; Maxwell, D.J.; Norris, G.H.; Billington, D.M.; Pipe, R.G.; Smith, J.E.; Inman, C.M.

    1992-01-01

    Progress is reported on work undertaken to evaluate quality checking methods for radioactive wastes. A sampling rig was designed, fabricated and used to develop techniques for the destructive sampling of cemented simulant waste using remotely operated equipment. An engineered system for the containment of cooling water was designed and manufactured and successfully demonstrated with the drum and coring equipment mounted in both vertical and horizontal orientations. The preferred in-cell orientation was found to be with the drum and coring machinery mounted in a horizontal position. Small powdered samples can be taken from cemented homogeneous waste cores using a hollow drill/vacuum section technique with the preferred subsampling technique being to discard the outer 10 mm layer to obtain a representative sample of the cement core. Cement blends can be dissolved using fusion techniques and the resulting solutions are stable to gelling for periods in excess of one year. Although hydrochloric acid and nitric acid are promising solvents for dissolution of cement blends, the resultant solutions tend to form silicic acid gels. An estimate of the beta-emitter content of cemented waste packages can be obtained by a combination of non-destructive and destructive techniques. The errors will probably be in excess of +/-60 % at the 95 % confidence level. Real-time X-ray video-imaging techniques have been used to analyse drums of uncompressed, hand-compressed, in-drum compacted and high-force compacted (i.e. supercompacted) simulant waste. The results have confirmed the applicability of this technique for NDT of low-level waste. 8 refs., 12 figs., 3 tabs

  8. Validação do teste Need For Cognition: um estudo em contabilidade comportamental Validación de la prueba need for cognition: un estudio en contabilidad comportamental Validation of the test need for cognition: a study in behavioral accounting

    Directory of Open Access Journals (Sweden)

    Raimundo Nonato Lima Filho

    2013-01-01

    Full Text Available Este estudo teve como objetivo validar a escala Need For Cognition (NFC em estudos em Contabilidade comportamental. Ademais, buscou-se medir possíveis correlações entre o nível de necessidade de cognição e a existência de vieses cognitivos em decisões contábeis e financeiras. Para efetivar o processo de validação completo, foram realizadas duas validações - critério e construto. A análise foi feita mediante a apreciação de uma amostra formada por 128 estudantes de pós-graduação. A técnica estatística utilizada para validação desse teste foi a análise fatorial, por possuir a capacidade de determinar o grau de influência de determinada variável na explicação de um fator, e, para o tratamento dos dados, foi utilizada a regressão logística por possibilitar a explicação de valores em função de valores conhecidos ou de variáveis independentes. Os resultados da validade de construto apontaram a legitimidade do NFC como escala unidimensional, excluindo-se três outputs de sua escala original; já os resultados da validade de critério confirmaram o impacto do nível de cognição na maximização da ocorrência de heurísticas em decisões gerenciais.Este estudio tuvo como objetivo validar la escala Need For Cognition (NFC en estudios en Contabilidad comportamental. Además, se buscó medir posibles correlaciones entre el nivel de necesidad de cognición y la existencia de planteos cognoscitivos en decisiones contables y financieras. Para hacer efectivo el proceso de validación completo, fueron realizadas dos validaciones - criterio y constructo. El análisis fue realizado mediante la apreciación de una muestra formada por 128 estudiantes de posgrado. La técnica estadística utilizada para la validación de esa prueba fue el análisis factorial, por poseer la capacidad de determinar el grado de influencia de determinada variable en la explicación de un factor, y, para el tratamiento de los datos, fue utilizada la

  9. Supervisory fussy control for an electric generating hybrid system; Control supervisorio difuso para un sistema hibrido de generacion electrica

    Energy Technology Data Exchange (ETDEWEB)

    Lagunas Mendoza, Javier

    2004-11-15

    the fuzzy supervisory controller were compared with a conventional controller. The results shows that the supervisory controller fulfills the three main objectives of the system operation: I) to reduce the fuel consumption of the back-up system, II) to reduce the depth of the discharge of the battery bank, and III) to keep fully charged the battery bank as much as possible in order to make a better use of the available free renewable energy sources. [Spanish] En este trabajo se presenta el desarrollo de un controlador supervisorio difuso para un sistema hibrido de generacion electrica (SHGE). En este trabajo se definio la configuracion y los elementos que componen el SHGE a utilizar, producto de la revision de configuraciones de sistemas hibridos propuestas actualmente. La configuracion del SHGE incluye: arreglos fotovoltaicos y aerogeneradores como fuentes de generacion renovable, una maquina de combustion interna como sistema de respaldo, un banco de baterias como medio de almacenamiento de energia, cargas electricas en corriente alterna y un inversor CD/CA para poder alimentarlas. Tambien a partir de la configuracion propuesta se buscaron y seleccionaron los modelos matematicos de los diferentes elementos del sistema. Se llevo a cabo la validacion de los modelos a traves de la comparacion de la salida contra datos reales obtenidos en un SHGE instalado en Pachuca. Con los modelos se llevo a cabo el desarrollo de un programa de simulacion para un SHGE en Matlab. Se determino la funcion principal del controlador supervisorio dentro del SHGE. La funcion es satisfacer el o los objetivos de operacion del sistema. La filosofia de operacion del controlador supervisorio se definio a partir de la configuracion electrica propuesta y de los objetivos de operacion del sistema. Por lo que respecta al desarrollo del controlador supervisorio, se llevo a cabo una revision de los controladores supervisorios actuales que utilizan alguna tecnica de control inteligente. A partir de

  10. Validación de un instrumento para el tamizaje de casos de diabetes tipo 2 y la vigilancia de personas en riesgo en México Validation of an instrument for screening cases of type 2 diabetes and monitoring at-risk individuals in Mexico

    Directory of Open Access Journals (Sweden)

    Fernando Guerrero-Romero

    2010-03-01

    Full Text Available OBJETIVO: Validar un método para el tamizaje de casos de diabetes tipo 2 y la vigilancia de personas en riesgo en una población del norte de México. MÉTODOS: El instrumento para el tamizaje de la diabetes tipo 2 (ITD se desarrolló a partir de un análisis de regresión logística múltiple que permitió determinar la asociación entre el diagnóstico nuevo de diabetes (variable dependiente y 11 factores de riesgo ya conocidos. Se realizaron validaciones interna (por el método de validación cruzada de conjuntos y externa mediante el seguimiento de una cohorte de personas sanas. Para estimar el riesgo relativo (RR de desarrollar diabetes tipo 2 se toma la puntuación total del ITD según los factores de riesgo de una persona y se lleva a una curva que ofrece la probabilidad de que esa persona desarrolle la enfermedad. RESULTADOS: De las 525 personas de la cohorte, 438 (83,4% completaron en promedio 7 años de seguimiento (entre 4,5 y 10 años, para un total de 2 696 personas-año; 62 (14,2% personas desarrollaron diabetes durante el seguimiento. Las personas que por sus factores de riesgo acumularon 55 puntos presentaron un incremento significativo en el riesgo de desarrollar diabetes en 7 años (RR = 6,1; IC95%: 1,7 a 11,1, mayor aún cuando la puntuación era de 75 puntos (RR = 9,4; IC95%: 2,1 a 11,5. CONCLUSIONES: El ITD es una alternativa válida y de fácil utilización para el tamizaje de la diabetes tipo 2. Su aplicación permitirá extender los beneficios de las acciones de prevención de la enfermedad y el diagnóstico temprano, sin aumentar considerablemente los costos y con un uso mínimo de los recursos de laboratorio.OBJECTIVE: To validate a method for screening cases of type 2 diabetes and monitoring at-risk people in a community in northern Mexico. METHODS: The screening instrument for type 2 diabetes (ITD, for its Spanish acronym was developed using a multiple logistic regression analysis that made it possible to determine

  11. Validación de un cuestionario breve para detectar situaciones de violencia de género en las consultas clínicas Validation of a short questionnaire to use in clinical consultations to detect gender violence

    Directory of Open Access Journals (Sweden)

    María Pía Majdalani

    2005-02-01

    Full Text Available OBJETIVOS: Validar un cuestionario diseñado para detectar casos de violencia, en consultorios de atención primaria, hacia mujeres de habla hispana. MÉTODOS: El estudio de validación se llevó a cabo entre octubre de 2002 y octubre de 2003 en el Programa de Medicina Interna General del Hospital de Clínicas, Universidad de Buenos Aires, Argentina. El cuestionario original en español se había formulado en clínicas de salud sexual y reproductiva de cinco países de América Latina y el Caribe. En él se abarcaban las formas más frecuentes de violencia basada en el género (VBG (emocional, física, sexual y abuso sexual durante la niñez; se exploraba cómo, cuándo y quién perpetró la agresión, y se indagaba acerca de la percepción de la paciente con respecto al peligro en que se encontraba. Durante la investigación en Buenos Aires se evaluaron el formato y el contenido teórico de la encuesta y se realizaron validaciones lingüística y psicométrica. Se evaluó la confiabilidad del instrumento en términos de reproducibilidad, estabilidad y coherencia interna. RESULTADOS: Se comprobó que las mujeres encuestadas comprendieron bien las preguntas, los ejemplos dados y las opciones de respuesta y que no percibieron la encuesta como un elemento de intimidación, ni una intromisión en su vida privada. En general consideraron su aplicación en el ámbito de la atención primaria como una oportunidad clave para expresar su sufrimiento y recibir ayuda. El nivel de concordancia entre las respuestas en las cinco áreas exploradas (violencia psicológica, violencia psíquica, violencia sexual, abuso sexual en la niñez y percepción del riesgo actual fue muy alta, tanto en lo que respecta a reproducibilidad (valores de kappa de 0,63 a 1,00 como a estabilidad (valores de kappa de 0,62 a 1,00. La coherencia interna, evaluada mediante el coeficiente de correlación alfa, fue de 0,755 entre la violencia psíquica y la física, de 0,498 entre la

  12. Control de la calidad y estudio de estabilidad del paracetamol gotas orales 100 mg/ml Quality control and stability study of 100 mg/ml paracetamol oral drops

    Directory of Open Access Journals (Sweden)

    Caridad M García Peña

    2013-03-01

    Full Text Available Introducción: las gotas orales de Paracetamol, están indicadas a la población infantil hasta los 5 años para el alivio de la fiebre, dolor de cabeza, dolores dentales y proporciona alivio sintomático del resfriado común. Objetivo: validar dos métodos analíticos, para el control de la calidad y el estudio de estabilidad y estudiar la estabilidad de las gotas orales de producción nacional. Métodos: para cuantificar el principio activo para el estudio de estabilidad, la separación se realizó a través de una columna cromatográfica Lichrosorb RP - 18 (5µm (250 x 4 mm, con detección ultravioleta a 243 nm, empleando una fase móvil compuesta por Agua destilada: Metanol (3:1. Mientras que el método para el control de la calidad se utilizó un Espectrofotómetro SPECTRONIC GENESYS 2.Para el estudio de estabilidad, se emplearon los métodos de vida de estante (a temperatura inferior a 30 º C y de estabilidad acelerada (40 ± 2ºC mediante cromatografía líquida de alta eficiencia. Resultados: los resultados obtenidos de los parámetros evaluados en las validaciones se encontraron dentro de los límites establecidos. Los resultados del estudio de estabilidad realizado, demuestran que el producto terminado cumplió con las especificaciones de calidad durante el estudio. Conclusiones: los métodos analíticos por espectrofotometría UV y cromatografía líquida de alta resolución, son válidos para el control de la calidad y estudio de estabilidad de las gotas orales de Paracetamol 100 mg/mL, ya que resultaron lineales, precisos, exactos y específicos. Se demostró la estabilidad física, química y microbiológica del producto por espacio de 12 meses a temperatura inferior a 30 ºC, envasados en frascos de vidrio ámbar por 15 mL, boca 18 mm, calidad hidrolítica III. Además se evidenció que el producto es estable durante 30 días después de abierto el frasco.Introduction: paracetamol is an effective analgesic and antipyretic drug of

  13. Software library of meteorological routines for air quality models; Libreria de software de procedimientos meteorologicos para modelos de dispersion de contaminantes

    Energy Technology Data Exchange (ETDEWEB)

    Galindo Garcia, Ivan Francisco

    1999-04-01

    comparando los resultados de las rutinas desarrolladas con los resultados obtenidos de las mediciones en una estacion de meteorologia avanzada disenada y operada por el Instituto de Investigaciones Electricas (IIE). Los resultados satisfactorios de la validacion indican que es posible que a partir de los parametros meteorologicos producidos en las estaciones meteorologicas de Mexico se estimen los parametros meteorologicos requeridos por los modelos de dispersion de contaminantes y de esta manera poder aprovechar los beneficios que estos ofrecen. Por ultimo, como una aplicacion de la libreria de software desarrollada, se realizo la construccion de un procesador meteorologico para un modelo de dispersion en especifico (CALPUFF), donde se aprecia la gran utilidad del trabajo desarrollado.

  14. Assessing the potential toxicity of marine sediments found in petroleum industry areas: A new approach based on responses of postlarval shrimp; Evaluacion del potencial de toxicidad de sedimentos marinos en areas de la industria petrolera: Un nuevo metodo basado en respuestas de postlarvas de camarones

    Energy Technology Data Exchange (ETDEWEB)

    Evangelista, A.J.A.; Nascimento, I.A.; Pereira, S.A.; Lopes, M.B.N.L.; Martins, L.K.P. [Laboratorio de Bio Marinha e Biomonitoramento IBIO-UFBA, Campus Universitario de Ondina, Salvador (Brazil); Fillmann, G [Plymouth Marine Laboratory, West Hoe, PL (United Kingdom)

    2005-03-15

    impacted and relatively unperturbed environments, but also to separate the different degrees of impact among areas subjected to petroleum industry activities in the coastal environment. [Spanish] Se evaluo la toxicidad de sedimentos del area del noreste de la Bahia de Todos os Santos, Bahia, Brasil, para evaluar el impacto ambiental inducido por 50 anos de actividad industrial petrolera (Petrobras). Se recolectaron muestras de sedimento durante un ano, con intervalos de tres meses, en cuatro sitios relacionados con areas de extraccion (Ilha das Fontes, estacion 4), transporte (Ilhas de Madre de Deus y Pati, estaciones 2 y 3) y refinacion del petroleo (RELAM, estacion 1). Dos estaciones de referencia (5 y 6) se localizaron fuera del area de influencia del petroleo, al sur de la bahia. Se llevaron a cabo bioensayos estaticos por 96 h, usando postlarvas (PL) de Lytopenaeus vannamei con 7 a 8 dias de desarrollo. El ensayo fue realizado en contenedores con 200 g de sedimento superficial (1 cm de profundidad) y 2 L de agua (agua de mar filtrada, 28 ppm de salinidad, 27 {+-} C y DO bajo saturacion). Se alimentaron 15 PL en los contenedores diariamente con 60 nauplios de Artemia salina. Se monitorearon parametros quimicos. La mortalidad y la ganancia en peso seco fueron tomadas como parametros de validacion (end point). Los datos de mortalidad obtenidos de los sedimentos de las estaciones de Petrobras no mostraron diferencias significativas, en comparacion con las estaciones de referencia; sin embargo, la ganancia en peso seco mostro diferencias significativas entre estaciones. El valor maximo se alcanzo en la estacion 1 (refineria RELAM). Las estaciones 2 y 3 de las areas de transporte de petroleo no mostraron diferencias significativas. Para evaluar la sensibilidad de la prueba del sedimento para detectar contaminacion por la industria petrolera, los datos de toxicidad fueron considerados en terminos de niveles de hidrocarburos analizados en dichos sedimentos en las areas de

  15. Optimización del recorrido y de la potencia de un haz láser de CO2 en el tratamiento térmico de válvulas de motores diesel

    Directory of Open Access Journals (Sweden)

    Tobar, M. J.

    2005-12-01

    álvula. La resolución de la ecuación de conducción del calor se presenta complicada, en el momento en el que se incluyen propiedades termofísicas dependientes de la temperatura y una descripción realista de la geometría de la pieza. En la modelización es necesario utilizar métodos numéricos y se ha escogido, en este caso, el Método de los Elementos Finitos en el marco del programa comercial ANSYS®. La aplicación del estudio paramétrico, tanto numérico como experimental, previamente realizado sobre probetas planas a geometrías más complejas, requiere de un ajuste fino de esos parámetros para conseguir resultados comparables y tratamientos equivalentes. Entre otros aspectos del problema cabe resaltar la necesidad de obtener un mapa de isotermas paralelo a la superficie tratada; además la naturaleza circular de la trayectoria que recorre por completo el asiento de la válvula hace que el haz láser, hacia el final de su trayectoria, vuelva sobre el punto inicial, pasando por puntos que ya han sido calentados en el arranque del proceso, por lo tanto el suministro de potencia sobre la pieza ha de adaptarse a estas nuevas condiciones. Evidentemente, es necesario realizar la simulación de la transición de fase, lo que se consigue con las propiedades termofísicas adecuadas y una correcta estimación del coeficiente de absorción en cada una de las fases. Este trabajo muestra las ventajas del modelado teórico como apoyo para la optimización del tratamiento térmico superficial por láser de piezas de geometría compleja partiendo de validaciones realizadas en piezas más sencillas.

  16. Extensive lake sediment coring survey on Sub-Antarctic Indian Ocean Kerguelen Archipelago (French Austral and Antarctic Lands)

    Science.gov (United States)

    Arnaud, Fabien; Fanget, Bernard; Malet, Emmanuel; Poulenard, Jérôme; Støren, Eivind; Leloup, Anouk; Bakke, Jostein; Sabatier, Pierre

    2016-04-01

    sequence from the newly-named Lake Tiercelin (2m-long) was recovered using UWITEC gravity coring equipment operated from a portable rubber boat by 54m water-depth. Those three sequences cover the whole Holocene periods. The 3m-long sequence taken in Lake Guynemer, Loranchet peninsula, was taken using a homemade small platform and a Nesje piston corer by 50m water-depth and covers the last 5 ka cal. BP. Two additional lakes were cored in the vicinity of Lake Armor: Fougères and Poule from which short sequences were taken in order to study environmental changes since the arrival of humans in the 18th century and the subsequent introduction of exogenous plant and animal species. We present here preliminary results including the dating of all sediment sequences as well as their chemical logging and sedimentological description. This already revealed the recurrence of Holocene volcanic eruptions as well as erosion patterns that are comparable among different records. The recognition of tephra layers will further allow the synchronization of terrestrial records together and with marine records around Kerguelen Archipelago. Paleoclimate interpretations of acquired data as well as further measurements are still ongoing processes. However, one may already argue that we collected rare geological sequences of prime importance in the quest of understanding climate patterns affecting the southern high latitudes all along the Holocene. 1. Lamy. et al. 2015. in Integr. Anal. of Intergl. Clim. Dyn. Schulz & Paul eds., 75-81 (Springer) 2. Rebolledo et al. 2015. Quat. Res. 84, 21-36 3. Agosta et al. 2015. Clim. Res. 62, 219-240 4. Van der Putten et al 2015. Quat. Sci. Rev. 122, 142-157

  17. Preface

    Science.gov (United States)

    Batail, Patrick

    2004-04-01

    contribute oral presentations - we have decided to keep with as many 20 minutes talks as possible and had to resolve - rather reluctantly to run parallel sessions on Wednesday and Thursday mornings. Yet, in the end, there has been a significant number of solicitations for oral contributions of great interest which were simply impossible to fit in the schedule. We thank all the colleagues who have submitted their exciting work and who have presented their oral and posters contributions during the 23 sessions of the Symposium. Seven sessions were devoted to materials chemistry, of which two sessions dealt more specifically with organic synthesis and two sessions with molecular magnetic materials. The experimental aspects of one- and two-dimensional physics were discussed in two and four sessions, respectively. Aside several theoretical talks interspersed within the former experimental sessions, two sessions were dedicated to theoretical aspects of strongly correlated electron systems in low dimension. One session focused on high magnetic field phenomena and two sessions covered charge ordering phenomena. Finally, upcoming issues related to surface and interface phenomena in molecular conductors were addressed in one session. The current research in chemistry of molecular precursor is dominated by the concepts of multifunctional π systems constructed on tetrathiafulvalene-based redox cores equipped with hydrogen-bond donor-acceptor functionalities or tetrathiafulvalene-based ligands capable of coordinating a metal center. Likewise, in the same spirit, the introduction of chiral functionalities is reported in several contributions. Aside those in the chemistry of stabilized polyacenes and the chemistry of molecular inorganic macrospins species: most of the creative developments continue to involve the TTF platform. In that context, crystal engineering concepts associated with the manipulation of hydrogen bonds and complementary weak intermolecular interactions in competition

  18. Measurements of erosion potential using Gust chamber in Yolo Bypass near Sacramento, California

    Science.gov (United States)

    Work, Paul A.; Schoellhamer, David H.

    2018-04-27

    stress once this critical shear-stress threshold has been exceeded. These quantities were computed for each of the sites sampled. In total, 10 locations were sampled, representing 10 land uses ranging from wild and white rice fields to the flooded Liberty Island and the Toe Drain that receives runoff from much of the cultivated land (table 1).The Gust chamber test causes the erosion of a very small layer of sediment, typically less than a millimeter thick. The strength of the soil within this layer increases with depth, typically, and this soil strength versus depth is measured in the testing process.Results for each land use type tested are presented as the initial critical shear stress at which erosion began and the rate at which erosion increases as shear stress increases (table 2). Of the land use types sampled, irrigated pasture displayed the lowest critical shear stress, meaning that it required the smallest flow speed to initiate erosion. But in this case, the rate of increase of the subsequent erosion, given higher flow speeds, was small. The wild rice field samples exhibited a higher critical shear stress but also exhibited a much higher erosion rate once the critical shear stress was exceeded. The erosion rate for wild rice was about three times greater than that for white rice. Bear in mind that these results are based on only two cores tested per site, and variability between fields with the same crop could be significant. Approved digital data can be viewed and downloaded from ScienceBase, at https://doi.org/10.5066/F7BV7DQC. These results are being used to calculate erosion rates in the DWR Yolo Bypass D-MCM mercury model.The Toe Drain was very difficult to sample, owing to hard, consolidated sediments on the channel bed. On the first visit, two cores were obtained successfully, and testing revealed very different results. A second visit was made, but it was not possible to obtain cores suitable for testing with the coring