WorldWideScience

Sample records for core undergoing core-wide

  1. The Physical Mechanism of Core-Wide and Local Instabilities at the Forsmark-1 BWR

    International Nuclear Information System (INIS)

    Analytis, G. Th.

    1998-10-01

    During the last 15 years, the problem of BWR instabilities has attracted the attention of a number of researchers. From the theoretical point of view, one would be interested in physically understanding the mechanisms responsible for the in- and out-of-phase core wide power oscillations observed at certain operating points of the power-flow map in different BWRs. From the practical point of view, one must try to avoid these 'incidents' since either locally, or globally, the power may substantially exceed the prescribed levels. In this work, we shall use RAMONA3-12 and analyse a rather unusual instability incident at Forsmark-1 in which in addition to the core-wide fundamental spatial mode oscillation, there were local large amplitude power oscillations at different radial positions in the core. We were able to reproduce these unusual experimental findings by assuming that there are large amplitude Density Wave Oscillations (DWOs) in different bundles, induced by the fact that these bundles were not seated properly into the lower fuel support plate. (author)

  2. Estimation of the core-wide fuel rod damage during a LWR LOCA

    International Nuclear Information System (INIS)

    Mattila, L.; Sairanen, R.; Stengaard, J.-O.

    1975-01-01

    The number of fuel rods puncturing during a LWR LOCA must be estimated as a part of the plant radioactivity release analysis. Due to the great number of fuel rods in the core and the great number of contributing parameters, many of them associated with wide uncertainty and/or truly random variability limits, probabilistic methods are well applicable. A succession of computer models developed for this purpose is described together with applications to WWER-440 PWR. Deterministic models are shown to be seriously inadequate and even misleading under certain circumstances. A simple analytical probabilistic model appears to be suitable for many applications. Monte Carlo techniques allow the development of such sophisticated models that errors in the input data presently available probably become dominant in the residual uncertainty of the corewide fuel rod puncture analysis. (author)

  3. Finite element program ARKAS: verification for IAEA benchmark problem analysis on core-wide mechanical analysis of LMFBR cores

    International Nuclear Information System (INIS)

    Nakagawa, M.; Tsuboi, Y.

    1990-01-01

    ''ARKAS'' code verification, with the problems set in the International Working Group on Fast Reactors (IWGFR) Coordinated Research Programme (CRP) on the inter-comparison between liquid metal cooled fast breeder reactor (LMFBR) Core Mechanics Codes, is discussed. The CRP was co-ordinated by the IWGFR around problems set by Dr. R.G. Anderson (UKAEA) and arose from the IWGFR specialists' meeting on The Predictions and Experience of Core Distortion Behaviour (ref. 2). The problems for the verification (''code against code'') and validation (''code against experiment'') were set and calculated by eleven core mechanics codes from nine countries. All the problems have been completed and were solved with the core structural mechanics code ARKAS. Predictions by ARKAS agreed very well with other solutions for the well-defined verification problems. For the validation problems based on Japanese ex-reactor 2-D thermo-elastic experiments, the agreements between measured and calculated values were fairly good. This paper briefly describes the numerical model of the ARKAS code, and discusses some typical results. (author)

  4. An assessment of core wide coherency effects in the multichannel modeling of the initiating phase of a severe accident in a sodium fast reactor

    International Nuclear Information System (INIS)

    Guyot, M.; Gubernatis, P.; Suteau, C.; Le Tellier, R.; Lecerf, J.

    2014-01-01

    To consolidate the safety assessment for liquid-metal fast breeder reactors (LMFBRs), hypothetical core disruptive accident (HCDA) sequences have been extensively studied over the past decades. Numerous analyses of the so called initiating phase (or primary phase) of a HCDA have been made with the safety analysis system code SAS4A. The SAS4A accident analysis code requires that subassemblies or groups of subassemblies be represented together as independent channels. For simulating a severe accident sequence, a subassembly-to-channel assignment procedure has to be implemented to produce the consistent SAS4A input decks. Generally, one uses imposed criteria over relevant reactor parameters to determine the subassembly to- channel arrangement. The multiple-assembly-per-channel approach introduces core wide coherency effects, which can affect the reactivity balance and therefore the overall accident development. In this paper, a subassembly-to channel assignment procedure based on the subassembly power-to-flow ratio is presented and implemented to generate the SAS4A input decks over a range of parameter values. The corresponding SAS4A calculations have been performed on a large LMFBR. The purpose of the present series of calculations is to investigate the magnitude of errors encountered in the analysis of the initiating phase related to the subassembly-to-channel arrangement selection, by comparison with a one-subassembly-per-channel reference solution. It appears that a refinement in the channel arrangement substantially reduces core wide coherency effects. Analysis of the calculations also suggests that an accurate representation of the scenario requires the number of channels to be on approximately the same order of magnitude as the total number of subassemblies. Numerical results are examined to provide the reader with quantitative measurements of bias related to subassembly to- channel arrangement. (authors)

  5. RAMONA-3B calculations of core-wide and regional power/flow oscillations - comparison with Oskarshamn 3 natural circulation test data

    International Nuclear Information System (INIS)

    Andersson, S.; Stepniewski, M.

    1991-01-01

    The 3-D BWR Dynamics Code RAMONA-3D is used for a study of power and flow fluctuations at conditions close to observed limit-cycle out-of-phase oscillations during the start-up stability test at the Oskarshamn 3 internal pump BWR. The purpose of the work, which is sponsored by the Swedish Nuclear Inspectorate, SKI, is to see if the observed first order azimuthal oscillations can be reproduced in a simulation using no a-priori information on the oscillation pattern when setting up the model. The experimental data contain dynamic information on the local neutron flux at 32 LPRM detector locations and the inlet flow to 8 fuel channels. The oscillation patterns, i.e. amplitudes and phases at the resonance frequency for local power and flow, are evaluated by direct Fourier transformation of small time slices of the data. A large RAMONA-3B model, using 350 and 268 channels in the neutronic and hydraulic models respectively, each divided into 25 axial nodes, was used for the analyses. The agreement between measured and calculated local flux and flow oscillation frequency and patterns at the limit-cycle threshold is excellent, taking into account the limitations of the half-core model used

  6. Heated wire humidification circuit attenuates the decrease of core temperature during general anesthesia in patients undergoing arthroscopic hip surgery.

    Science.gov (United States)

    Park, Sooyong; Yoon, Seok-Hwa; Youn, Ann Misun; Song, Seung Hyun; Hwang, Ja Gyung

    2017-12-01

    Intraoperative hypothermia is common in patients undergoing general anesthesia during arthroscopic hip surgery. In the present study, we assessed the effect of heating and humidifying the airway with a heated wire humidification circuit (HHC) to attenuate the decrease of core temperature and prevent hypothermia in patients undergoing arthroscopic hip surgery under general anesthesia. Fifty-six patients scheduled for arthroscopic hip surgery were randomly assigned to either a control group using a breathing circuit connected with a heat and moisture exchanger (HME) (n = 28) or an HHC group using a heated wire humidification circuit (n = 28). The decrease in core temperature was measured from anesthetic induction and every 15 minutes thereafter using an esophageal stethoscope. Decrease in core temperature from anesthetic induction to 120 minutes after induction was lower in the HHC group (-0.60 ± 0.27℃) compared to the control group (-0.86 ± 0.29℃) (P = 0.001). However, there was no statistically significant difference in the incidence of intraoperative hypothermia or the incidence of shivering in the postanesthetic care unit. The use of HHC may be considered as a method to attenuate intraoperative decrease in core temperature during arthroscopic hip surgery performed under general anesthesia and exceeding 2 hours in duration.

  7. Effects of positive end-expiratory pressure on intraoperative core temperature in patients undergoing posterior spine surgery: prospective randomised trial.

    Science.gov (United States)

    Seo, Hyungseok; Do Son, Je; Lee, Hyung-Chul; Oh, Hyung-Min; Jung, Chul-Woo; Park, Hee-Pyoung

    2018-03-01

    Objective Positive end-expiratory pressure (PEEP) causes carotid baroreceptor unloading, which leads to thermoregulatory peripheral vasoconstriction. However, the effects of PEEP on intraoperative thermoregulation in the prone position remain unknown. Methods Thirty-seven patients undergoing spine surgery in the prone position were assigned at random to receive either 10 cmH 2 O PEEP (Group P) or no PEEP (Group Z). The primary endpoint was core temperature 180 minutes after intubation. Secondary endpoints were delta core temperature (difference in core temperature between 180 minutes and immediately after tracheal intubation), incidence of intraoperative hypothermia (core temperature of peripheral vasoconstriction-related data. Results The median [interquartile range] core temperature 180 minutes after intubation was 36.1°C [35.9°C-36.2°C] and 36.0°C [35.9°C-36.4°C] in Groups Z and P, respectively. The delta core temperature and incidences of intraoperative hypothermia and peripheral vasoconstriction were not significantly different between the two groups. The peripheral vasoconstriction threshold (36.2°C±0.5°C vs. 36.7°C±0.6°C) was lower and the onset of peripheral vasoconstriction (66 [60-129] vs. 38 [28-70] minutes) was slower in Group Z than in Group P. Conclusions Intraoperative PEEP did not reduce the core temperature decrease in the prone position, although it resulted in an earlier onset and higher threshold of peripheral vasoconstriction.

  8. A STUDY ON ADJUVANT HEAD CORING IN PATIENTS UNDERGOING LONGITUDINAL PANCREATICOJEJUNOSTOMY AND ITS AID IN PAIN REDUCTION IN CHRONIC PANCREATITIS

    Directory of Open Access Journals (Sweden)

    Sudhansu Sekhar Mohanty

    2016-07-01

    Full Text Available BACKGROUND The condition manifests as recurrent intractable abdominal pain. 1 This is the most important indication for surgical procedures. The pain is caused by increased pancreatic parenchymal and ductal pressure. Another cause is that chronic inflammation of the pancreas may lead to fibrosis of the peripancreatic capsule and perilobular parenchyma, which impairs local and regional blood flow, therefore causing pain through tissue ischaemia and acidosis. 2 This is the rationalisation behind adding the head coring to the decompression surgeries that had been classically in practice. METHODS This is a retrospective study. The study period spans over from January 2003 to December 2013, which is a 10-year period. Patients with intractable and non-relenting abdominal pain and a diagnosis of chronic pancreatitis with evidence of fibrosis of head of pancreas in imaging studies were included. 35 patients were randomly allocated for Head coring and LPJ by lottery method. The patients were analysed for duration of surgery, hospital stay, operative/postoperative complications and assessment of postoperative pain relief. Pain relief was assessed as complete (No analgesic required, satisfactory (Tolerable pain with normal daily activities and unsatisfactory (Hospitalisation and hampered daily activities. RESULTS Alcohol consumption (65.71% was the main cause of pancreatitis in the study group, followed by gallstones (14.28% and idiopathic (20% cause. Head coring (120 minutes takes a median operative time of 30 minutes more when done adjuvant to LPJ (90 minutes. Incidence of complications were comparable in both the surgeries. The common complications of prolonged ileus and wound infection are in the percentage of 12.5% in only LPJ and 15.78% in adjuvant head coring surgeries. Pain relief was good when the complete and satisfactory groups were compared. But there is not much of difference in unsatisfactory group comparison. CONCLUSION A 30 minutes

  9. The decrease effect of music on anxiety and distress of patients undergoing ultrasound guided core biopsy of the breast

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Ae Rang [Dept. of Diagnostic Radiology, St. Carollo General Hospital, Suncheon (Korea, Republic of); Sohn, Seok Joon [Dept. of Preventive Medicine, Chonnam National University Medical School, Chonnam National University Hospital, Gwangju (Korea, Republic of); Moon, Il Bong; Dong, Kyung Rae [Dept. of Radiological Technology, Gwangju Health University, Gwangju (Korea, Republic of)

    2017-06-15

    The aim of this study was to investigate that listening to music reduces the anxiety and distress of the patients who underwent ultrasound guided core biopsy in a clinic. One hundred patients underwent Ultrasound Guided Core Biopsy of the Breast. Each patients was allocated to one of two groups with different methods whether they listened to music or not. The experimental group listening to music are 50 patients and the control group are 50 patients. The difference of VAS anxiety score of pre-test and post-test was signifcant (p<0.001). Compared by the control group, the subjective distress of the patients listening to music such as pain and tension was significant (p<0.001) but nausea and dyspnea was not significant. The objective distress of the patients listening to music was statistically significant (p<0.001). The Differances of systolic blood pressure, diastolic blood pressure, pulse between pre-test and post-test were not signifcant. The results suggest that listening to music reduces the anxiety and distress of the patients who underwent ultrasound guided core biopsy in a clinic.

  10. The decrease effect of music on anxiety and distress of patients undergoing ultrasound guided core biopsy of the breast

    International Nuclear Information System (INIS)

    Woo, Ae Rang; Sohn, Seok Joon; Moon, Il Bong; Dong, Kyung Rae

    2017-01-01

    The aim of this study was to investigate that listening to music reduces the anxiety and distress of the patients who underwent ultrasound guided core biopsy in a clinic. One hundred patients underwent Ultrasound Guided Core Biopsy of the Breast. Each patients was allocated to one of two groups with different methods whether they listened to music or not. The experimental group listening to music are 50 patients and the control group are 50 patients. The difference of VAS anxiety score of pre-test and post-test was signifcant (p<0.001). Compared by the control group, the subjective distress of the patients listening to music such as pain and tension was significant (p<0.001) but nausea and dyspnea was not significant. The objective distress of the patients listening to music was statistically significant (p<0.001). The Differances of systolic blood pressure, diastolic blood pressure, pulse between pre-test and post-test were not signifcant. The results suggest that listening to music reduces the anxiety and distress of the patients who underwent ultrasound guided core biopsy in a clinic

  11. Development of a core outcome set for studies involving patients undergoing major lower limb amputation for peripheral arterial disease: study protocol for a systematic review and identification of a core outcome set using a Delphi survey.

    Science.gov (United States)

    Ambler, Graeme K; Bosanquet, David C; Brookes-Howell, Lucy; Thomas-Jones, Emma; Waldron, Cherry-Ann; Edwards, Adrian G K; Twine, Christopher P

    2017-12-28

    The development of a standardised reporting set is important to ensure that research is directed towards the most important outcomes and that data is comparable. To ensure validity, the set must be agreed by a consensus of stakeholders including patients, healthcare professionals and lay representatives. There is currently no agreed core outcome set for patients undergoing major lower limb amputation for peripheral arterial disease (PAD) for either short- or medium-term research outcomes. By developing these sets we aim to rationalise future trial outcomes, facilitate meta-analysis and improve the quality and applicability of amputation research. We will undertake a comprehensive systematic review of studies of patients undergoing major lower limb amputation for PAD. Data regarding all primary and secondary outcomes reported in relevant studies will be extracted and summarised as outcome domains. We will then undertake focus groups with key stakeholders (patients, carers, health and social care workers) to collect qualitative data to identify the main short- and medium-term research outcomes for patients undergoing major lower limb amputation. Results of the systematic review and focus groups will be combined to create a comprehensive list of potential key outcomes. Stakeholders (patients, researchers and health and social care workers) will then be polled to determine which of the outcomes are considered to be important in a general context using a three-phase Delphi process. After preliminary analysis, results will be presented at a face-to-face meeting of key stakeholders for discussion and voting on the final set of core outcomes. This project is being run in parallel with a feasibility trial assessing perineural catheters in patients undergoing lower limb amputation (the PLACEMENT trial). Full ethical approval has been granted for the study (Wales REC 3 reference number 16/WA/0353). Core outcome sets will be developed for short- and medium-term outcomes of

  12. Can the ICF osteoarthritis core set represent a future clinical tool in measuring functioning in persons with osteoarthritis undergoing hip and knee joint replacement?

    Science.gov (United States)

    Alviar, Maria Jenelyn; Olver, John; Pallant, Julie F; Brand, Caroline; de Steiger, Richard; Pirpiris, Marinis; Bucknill, Andrew; Khan, Fary

    2012-11-01

    To determine the dimensionality, reliability, model fit, adequacy of the qualifier levels, response patterns across different factors, and targeting of the International Classification of Functioning, Disability and Health (ICF) osteoarthritis core set categories in people with osteoarthritis undergoing hip and knee arthroplasty. The osteoarthritis core set was rated in 316 persons with osteoarthritis who were either in the pre-operative or within one year post-operative stage. Rasch analyses were performed using the RUMM 2030 program. Twelve of the 13 body functions categories and 13 of the 19 activity and participation categories had good model fit. The qualifiers displayed disordered thresholds necessitating rescoring. There was uneven spread of ICF categories across the full range of the patients' scores indicating off--targeting. Subtest analysis of the reduced ICF categories of body functions and activity and participation showed that the two components could be integrated to form one measure. The results suggest that it is possible to measure functioning using a unidimensional construct based on ICF osteoarthritis core set categories of body functions and activity and participation in this population. However, omission of some categories and reduction in qualifier levels are necessary. Further studies are needed to determine whether better targeting is achieved, particularly during the pre-operative and during the sub-acute care period.

  13. African Swine Fever Virus Undergoes Outer Envelope Disruption, Capsid Disassembly and Inner Envelope Fusion before Core Release from Multivesicular Endosomes.

    Directory of Open Access Journals (Sweden)

    Bruno Hernáez

    2016-04-01

    Full Text Available African swine fever virus (ASFV is a nucleocytoplasmic large DNA virus (NCLDV that causes a highly lethal disease in domestic pigs. As other NCLDVs, the extracellular form of ASFV possesses a multilayered structure consisting of a genome-containing nucleoid successively wrapped by a thick protein core shell, an inner lipid membrane, an icosahedral protein capsid and an outer lipid envelope. This structural complexity suggests an intricate mechanism of internalization in order to deliver the virus genome into the cytoplasm. By using flow cytometry in combination with pharmacological entry inhibitors, as well as fluorescence and electron microscopy approaches, we have dissected the entry and uncoating pathway used by ASFV to infect the macrophage, its natural host cell. We found that purified extracellular ASFV is internalized by both constitutive macropinocytosis and clathrin-mediated endocytosis. Once inside the cell, ASFV particles move from early endosomes or macropinosomes to late, multivesicular endosomes where they become uncoated. Virus uncoating requires acidic pH and involves the disruption of the outer membrane as well as of the protein capsid. As a consequence, the inner viral membrane becomes exposed and fuses with the limiting endosomal membrane to release the viral core into the cytosol. Interestingly, virus fusion is dependent on virus protein pE248R, a transmembrane polypeptide of the inner envelope that shares sequence similarity with some members of the poxviral entry/fusion complex. Collective evidence supports an entry model for ASFV that might also explain the uncoating of other multienveloped icosahedral NCLDVs.

  14. Assessment of outcome in patients undergoing surgery for intradural spinal tumor using the multidimensional patient-rated Core Outcome Measures Index and the modified McCormick Scale.

    Science.gov (United States)

    Bellut, David; Burkhardt, Jan-Karl; Mannion, Anne F; Porchet, François

    2015-08-01

    OBJECT The aim of this study was to evaluate outcome in patients undergoing surgical treatment for intradural spinal tumor using a patient-oriented, self-rated, outcome instrument and a physician-based disease-specific instrument. METHODS Prospectively collected data from 63 patients with intradural spinal tumor were analyzed in relation to scores on the multidimensional patient-rated Core Outcome Measures Index (COMI) and the physician-rated modified McCormick Scale, before and at 3 and 12 months after surgery. RESULTS There was no statistically significant difference between the scores on the modified McCormick Scale preoperatively and at the 3-month follow-up, though there was a trend for improvement (p = 0.073); however, comparisons between the scores determined preoperatively and at the 12-month follow-up, as well as 3- versus 12-month follow-ups, showed a statistically significant improvement in each case (p 0.05) up to 12 months postoperatively. In contrast, the overall COMI score, "worst pain," quality of life, and social disability not only showed a significant reduction from before surgery to 3 months after surgery (p 0.05), but did show a significant improvement (p = 0.011) from 3 months to 12 months after surgery. At the 3- and 12-month follow-ups, 85.2% and 83.9% of patients, respectively, declared that the surgical procedure had helped/helped a lot; 95.1% and 95.2%, respectively, declared that they were satisfied/very satisfied with their care. CONCLUSIONS COMI is a feasible tool to use in the evaluation of baseline symptoms and outcome in patients undergoing surgery for intradural spinal tumor. COMI was able to detect changes in outcome at 3 months after surgery (before changes were apparent on the modified McCormick Scale) and on later postoperative follow-up. The COMI subdomains are valuable for monitoring the patient's reintegration into society and the work environment. The addition of an item that specifically covers neurological deficits may

  15. Aortic Regurgitation in Patients Undergoing Transcatheter Aortic Valve Replacement With the Self-Expanding CoreValve Versus the Balloon-Expandable SAPIEN XT Valve.

    Science.gov (United States)

    Kiramijyan, Sarkis; Magalhaes, Marco A; Koifman, Edward; Didier, Romain; Escarcega, Ricardo O; Baker, Nevin C; Negi, Smita I; Minha, Sa'ar; Torguson, Rebecca; Jiaxiang, Gai; Asch, Federico M; Wang, Zuyue; Okubagzi, Petros; Gaglia, Michael A; Ben-Dor, Itsik; Satler, Lowell F; Pichard, Augusto D; Waksman, Ron

    2016-05-01

    The incidence of aortic regurgitation (AR) after transcatheter aortic valve replacement (TAVR) in a self-expanding and a balloon-expandable system is controversial. This study aimed to examine the incidence and severity of post-TAVR AR with the CoreValve (CV) versus the Edwards XT Valve (XT). Baseline, procedural, and postprocedural inhospital outcomes were compared. The primary end point was the incidence of post-TAVR AR of any severity, assessed with a transthoracic echocardiogram, in the CV versus XT groups. A multivariate logistic regression analysis was completed to evaluate for correlates of the primary end point. The secondary end points included the change in severity of AR at 30-day and 1-year follow-up. A total of 223 consecutive patients (53% men, mean age 82 years) who had transfemoral TAVR with either a CV (n = 119) or XT (n = 104) were evaluated. The rates of post-TAVR AR in the groups were similar, and there was no evidence of more-than-moderate AR in either group. There were significant differences in the rates of intraprocedural balloon postdilation with the CV (17.1%) versus XT valve (5.8%; p = 0.009) and in the rates of intraprocedural implantation of a second valve-in-valve prosthesis with the CV (9.9%) versus XT valve (2.2%; p = 0.036). There were no significant differences in inhospital safety outcomes between the 2 groups. In conclusion, the incidence of post-TAVR AR is similar between the CV and the XT valve when performed by experienced operators using optimal intraprocedural strategies, as deemed appropriate, to mitigate the severity of AR. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. SUPERENERGY-2: a multiassembly, steady-state computer code for LMFBR core thermal-hydraulic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Basehore, K.L.; Todreas, N.E.

    1980-08-01

    Core thermal-hydraulic design and performance analyses for Liquid Metal Fast Breeder Reactors (LMFBRs) require repeated detailed multiassembly calculations to determine radial temperature profiles and subchannel outlet temperatures for various core configurations and subassembly structural analyses. At steady-state, detailed core-wide temperature profiles are required for core restraint calculations and subassembly structural analysis. In addition, sodium outlet temperatures are routinely needed for each reactor operating cycle. The SUPERENERGY-2 thermal-hydraulic code was designed specifically to meet these designer needs. It is applicable only to steady-state, forced-convection flow in LMFBR core geometries.

  17. SUPERENERGY-2: a multiassembly, steady-state computer code for LMFBR core thermal-hydraulic analysis

    International Nuclear Information System (INIS)

    Basehore, K.L.; Todreas, N.E.

    1980-08-01

    Core thermal-hydraulic design and performance analyses for Liquid Metal Fast Breeder Reactors (LMFBRs) require repeated detailed multiassembly calculations to determine radial temperature profiles and subchannel outlet temperatures for various core configurations and subassembly structural analyses. At steady-state, detailed core-wide temperature profiles are required for core restraint calculations and subassembly structural analysis. In addition, sodium outlet temperatures are routinely needed for each reactor operating cycle. The SUPERENERGY-2 thermal-hydraulic code was designed specifically to meet these designer needs. It is applicable only to steady-state, forced-convection flow in LMFBR core geometries

  18. Ice Sheets & Ice Cores

    DEFF Research Database (Denmark)

    Mikkelsen, Troels Bøgeholm

    Since the discovery of the Ice Ages it has been evident that Earth’s climate is liable to undergo dramatic changes. The previous climatic period known as the Last Glacial saw large oscillations in the extent of ice sheets covering the Northern hemisphere. Understanding these oscillations known....... The first part concerns time series analysis of ice core data obtained from the Greenland Ice Sheet. We analyze parts of the time series where DO-events occur using the so-called transfer operator and compare the results with time series from a simple model capable of switching by either undergoing...

  19. Proteomics Core

    Data.gov (United States)

    Federal Laboratory Consortium — Proteomics Core is the central resource for mass spectrometry based proteomics within the NHLBI. The Core staff help collaborators design proteomics experiments in a...

  20. Oyster Creek fuel thermal margin during core thermal-hydraulic oscillations

    International Nuclear Information System (INIS)

    Dougher, J.D.

    1990-01-01

    The Oyster Creek nuclear facility, a boiling water reactor (BWR)-2 plant type, has never experienced core thermal-hydraulic instability. Power oscillations, however, have been observed in other BWR cores both domestically and internationally. Two modes of oscillations have been observed, core wide and regional half-core. During core wide oscillations, the neutron flux in the core oscillates in the radial fundamental mode. During regional half-core oscillations, higher order harmonics in the radial plane result in out-of-phase oscillations with the neutron flux in one half of the core oscillating 180 deg out-of-phase with the neutron flux in the other half of the core. General Design Criteria 12 requires either prevention or detection and suppression of power oscillations which could result in violations of fuel design limits. Analyses performed by General Electric have demonstrated that for large-magnitude oscillations the potential exists for violation of the safety limit minimum critical power ratio (MCPR). However, for plants with a flow-biased neutron flux scram automatic mitigation of oscillations may be provided at an oscillation magnitude below that at which the safety limit is challenged. Plant-specific analysis for Oyster Creek demonstrates that the existing average power range monitor (APRM) system will sense and suppress power oscillations prior to violation of any safety limits

  1. Transformer core

    NARCIS (Netherlands)

    Mehendale, A.; Hagedoorn, Wouter; Lötters, Joost Conrad

    2008-01-01

    A transformer core includes a stack of a plurality of planar core plates of a magnetically permeable material, which plates each consist of a first and a second sub-part that together enclose at least one opening. The sub-parts can be fitted together via contact faces that are located on either side

  2. Transformer core

    NARCIS (Netherlands)

    Mehendale, A.; Hagedoorn, Wouter; Lötters, Joost Conrad

    2010-01-01

    A transformer core includes a stack of a plurality of planar core plates of a magnetically permeable material, which plates each consist of a first and a second sub-part that together enclose at least one opening. The sub-parts can be fitted together via contact faces that are located on either side

  3. Core lifter

    Energy Technology Data Exchange (ETDEWEB)

    Pavlov, N G; Edel' man, Ya A

    1981-02-15

    A core lifter is suggested which contains a housing, core-clamping elements installed in the housing depressions in the form of semirings with projections on the outer surface restricting the rotation of the semirings in the housing depressions. In order to improve the strength and reliability of the core lifter, the semirings have a variable transverse section formed from the outside by the surface of the rotation body of the inner arc of the semiring aroung the rotation axis and from the inner a cylindrical surface which is concentric to the outer arc of the semiring. The core-clamping elements made in this manner have the possibility of freely rotating in the housing depressions under their own weight and from contact with the core sample. These semirings do not have weakened sections, have sufficient strength, are inserted into the limited ring section of the housing of the core lifter without reduction in its through opening and this improve the reliability of the core lifter in operation.

  4. Reactor core

    International Nuclear Information System (INIS)

    Azekura, Kazuo; Kurihara, Kunitoshi.

    1992-01-01

    In a BWR type reactor, a great number of pipes (spectral shift pipes) are disposed in the reactor core. Moderators having a small moderating cross section (heavy water) are circulated in the spectral shift pipes to suppress the excess reactivity while increasing the conversion ratio at an initial stage of the operation cycle. After the intermediate stage of the operation cycle in which the reactor core reactivity is lowered, reactivity is increased by circulating moderators having a great moderating cross section (light water) to extend the taken up burnup degree. Further, neutron absorbers such as boron are mixed to the moderator in the spectral shift pipe to control the concentration thereof. With such a constitution, control rods and driving mechanisms are no more necessary, to simplify the structure of the reactor core. This can increase the fuel conversion ratio and control great excess reactivity. Accordingly, a nuclear reactor core of high conversion and high burnup degree can be attained. (I.N.)

  5. Ice Cores

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Records of past temperature, precipitation, atmospheric trace gases, and other aspects of climate and environment derived from ice cores drilled on glaciers and ice...

  6. Reactor core

    International Nuclear Information System (INIS)

    Matsuura, Tetsuaki; Nomura, Teiji; Tokunaga, Kensuke; Okuda, Shin-ichi

    1990-01-01

    Fuel assemblies in the portions where the gradient of fast neutron fluxes between two opposing faces of a channel box is great are kept loaded at the outermost peripheral position of the reactor core also in the second operation cycle in the order to prevent interference between a control rod and the channel box due to bending deformation of the channel box. Further, the fuel assemblies in the second row from the outer most periphery in the first operation cycle are also kept loaded at the second row in the second operation cycle. Since the gradient of the fast neutrons in the reactor core is especially great at the outer circumference of the reactor core, the channel box at the outer circumference is bent such that the surface facing to the center of the reactor core is convexed and the channel box in the second row is also bent to the identical direction, the insertion of the control rod is not interfered. Further, if the positions for the fuels at the outermost periphery and the fuels in the second row are not altered in the second operation cycle, the gaps are not reduced to prevent the interference between the control rod and the channel box. (N.H.)

  7. SCDAP: a light water reactor computer code for severe core damage analysis

    International Nuclear Information System (INIS)

    Marino, G.P.; Allison, C.M.; Majumdar, D.

    1982-01-01

    Development of the first code version (MODO) of the Severe Core Damage Analysis Package (SCDAP) computer code is described, and calculations made with SCDAP/MODO are presented. The objective of this computer code development program is to develop a capability for analyzing severe disruption of a light water reactor core, including fuel and cladding liquefaction, flow, and freezing; fission product release; hydrogen generation; quenched-induced fragmentation; coolability of the resulting geometry; and ultimately vessel failure due to vessel-melt interaction. SCDAP will be used to identify the phenomena which control core behavior during a severe accident, to help quantify uncertainties in risk assessment analysis, and to support planning and evaluation of severe fuel damage experiments and data. SCDAP/MODO addresses the behavior of a single fuel bundle. Future versions will be developed with capabilities for core-wide and vessel-melt interaction analysis

  8. Core BPEL

    DEFF Research Database (Denmark)

    Hallwyl, Tim; Højsgaard, Espen

    The Web Services Business Process Execution Language (WS-BPEL) is a language for expressing business process behaviour based on web services. The language is intentionally not minimal but provides a rich set of constructs, allows omission of constructs by relying on defaults, and supports language......, does not allow omissions, and does not contain ignorable elements. We do so by identifying syntactic sugar, including default values, and ignorable elements in WS-BPEL. The analysis results in a translation from the full language to the core subset. Thus, we reduce the effort needed for working...

  9. Side core lifter

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, Ya A

    1982-01-01

    A side core lifter is proposed which contains a housing with guide slits and a removable core lifter with side projections on the support section connected to the core receiver. In order to preserve the structure of the rock in the core sample by means of guaranteeing rectilinear movement of the core lifter in the rock, the support and core receiver sections are hinged. The device is equipped with a spring for angular shift in the core-reception part.

  10. MTR core loading pattern optimization using burnup dependent group constants

    Directory of Open Access Journals (Sweden)

    Iqbal Masood

    2008-01-01

    Full Text Available A diffusion theory based MTR fuel management methodology has been developed for finding superior core loading patterns at any stage for MTR systems, keeping track of burnup of individual fuel assemblies throughout their history. It is based on using burnup dependent group constants obtained by the WIMS-D/4 computer code for standard fuel elements and control fuel elements. This methodology has been implemented in a computer program named BFMTR, which carries out detailed five group diffusion theory calculations using the CITATION code as a subroutine. The core-wide spatial flux and power profiles thus obtained are used for calculating the peak-to-average power and flux-ratios along with the available excess reactivity of the system. The fuel manager can use the BFMTR code for loading pattern optimization for maximizing the excess reactivity, keeping the peak-to-average power as well as flux-ratio within constraints. The results obtained by the BFMTR code have been found to be in good agreement with the corresponding experimental values for the equilibrium core of the Pakistan Research Reactor-1.

  11. Animal MRI Core

    Data.gov (United States)

    Federal Laboratory Consortium — The Animal Magnetic Resonance Imaging (MRI) Core develops and optimizes MRI methods for cardiovascular imaging of mice and rats. The Core provides imaging expertise,...

  12. Mediator Undergoes a Compositional Change during Transcriptional Activation.

    Science.gov (United States)

    Petrenko, Natalia; Jin, Yi; Wong, Koon Ho; Struhl, Kevin

    2016-11-03

    Mediator is a transcriptional co-activator recruited to enhancers by DNA-binding activators, and it also interacts with RNA polymerase (Pol) II as part of the preinitiation complex (PIC). We demonstrate that a single Mediator complex associates with the enhancer and core promoter in vivo, indicating that it can physically bridge these transcriptional elements. However, the Mediator kinase module associates strongly with the enhancer, but not with the core promoter, and it dissociates from the enhancer upon depletion of the TFIIH kinase. Severing the kinase module from Mediator by removing the connecting subunit Med13 does not affect Mediator association at the core promoter but increases occupancy at enhancers. Thus, Mediator undergoes a compositional change in which the kinase module, recruited via Mediator to the enhancer, dissociates from Mediator to permit association with Pol II and the PIC. As such, Mediator acts as a dynamic bridge between the enhancer and core promoter. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Core Hunter 3: flexible core subset selection.

    Science.gov (United States)

    De Beukelaer, Herman; Davenport, Guy F; Fack, Veerle

    2018-05-31

    Core collections provide genebank curators and plant breeders a way to reduce size of their collections and populations, while minimizing impact on genetic diversity and allele frequency. Many methods have been proposed to generate core collections, often using distance metrics to quantify the similarity of two accessions, based on genetic marker data or phenotypic traits. Core Hunter is a multi-purpose core subset selection tool that uses local search algorithms to generate subsets relying on one or more metrics, including several distance metrics and allelic richness. In version 3 of Core Hunter (CH3) we have incorporated two new, improved methods for summarizing distances to quantify diversity or representativeness of the core collection. A comparison of CH3 and Core Hunter 2 (CH2) showed that these new metrics can be effectively optimized with less complex algorithms, as compared to those used in CH2. CH3 is more effective at maximizing the improved diversity metric than CH2, still ensures a high average and minimum distance, and is faster for large datasets. Using CH3, a simple stochastic hill-climber is able to find highly diverse core collections, and the more advanced parallel tempering algorithm further increases the quality of the core and further reduces variability across independent samples. We also evaluate the ability of CH3 to simultaneously maximize diversity, and either representativeness or allelic richness, and compare the results with those of the GDOpt and SimEli methods. CH3 can sample equally representative cores as GDOpt, which was specifically designed for this purpose, and is able to construct cores that are simultaneously more diverse, and either are more representative or have higher allelic richness, than those obtained by SimEli. In version 3, Core Hunter has been updated to include two new core subset selection metrics that construct cores for representativeness or diversity, with improved performance. It combines and outperforms the

  14. k-core covers and the core

    NARCIS (Netherlands)

    Sanchez-Rodriguez, E.; Borm, Peter; Estevez-Fernandez, A.; Fiestras-Janeiro, G.; Mosquera, M.A.

    This paper extends the notion of individual minimal rights for a transferable utility game (TU-game) to coalitional minimal rights using minimal balanced families of a specific type, thus defining a corresponding minimal rights game. It is shown that the core of a TU-game coincides with the core of

  15. Reactor core fuel management

    International Nuclear Information System (INIS)

    Silvennoinen, P.

    1976-01-01

    The subject is covered in chapters, entitled: concepts of reactor physics; neutron diffusion; core heat transfer; reactivity; reactor operation; variables of core management; computer code modules; alternative reactor concepts; methods of optimization; general system aspects. (U.K.)

  16. Nuclear reactor core catcher

    International Nuclear Information System (INIS)

    1977-01-01

    A nuclear reactor core catcher is described for containing debris resulting from an accident causing core meltdown and which incorporates a method of cooling the debris by the circulation of a liquid coolant. (U.K.)

  17. Seismic core shroud

    International Nuclear Information System (INIS)

    Puri, A.; Mullooly, J.F.

    1981-01-01

    A core shroud is provided, comprising: a coolant boundary, following the shape of the core boundary, for channeling the coolant through the fuel assemblies; a cylindrical band positioned inside the core barrel and surrounding the coolant boundary; and support members extending from the coolant boundary to the band, for transferring load from the coolant boundary to the band. The shroud may be assembled in parts using automated welding techniques, and it may be adjusted to fit the reactor core easily

  18. Core Values | NREL

    Science.gov (United States)

    Core Values Core Values NREL's core values are rooted in a safe and supportive work environment guide our everyday actions and efforts: Safe and supportive work environment Respect for the rights physical and social environment Integrity Maintain the highest standard of ethics, honesty, and integrity

  19. Sidewall coring shell

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, Ya A; Konstantinov, L P; Martyshin, A N

    1966-12-12

    A sidewall coring shell consists of a housing and a detachable core catcher. The core lifter is provided with projections, the ends of which are situated in another plane, along the longitudinal axis of the lifter. The chamber has corresponding projections.

  20. Rotary core drills

    Energy Technology Data Exchange (ETDEWEB)

    1967-11-30

    The design of a rotary core drill is described. Primary consideration is given to the following component parts of the drill: the inner and outer tube, the core bit, an adapter, and the core lifter. The adapter has the form of a downward-converging sleeve and is mounted to the lower end of the inner tube. The lifter, extending from the adapter, is split along each side so that it can be held open to permit movement of a core. It is possible to grip a core by allowing the lifter to assume a closed position.

  1. Specialised care in patients undergoing pancreatoduodenectomy

    NARCIS (Netherlands)

    Tol, J.A.M.G.

    2014-01-01

    This thesis studies the controversies in the management of patients with pancreatic cancer undergoing pancreatoduodenectomy and determines different factors that will improve this management and thereby the postoperative outcomes. The studies were performed in both the pre-, peri- and postoperative

  2. Antibiotic prophylaxis for patients undergoing elective endoscopic ...

    African Journals Online (AJOL)

    Antibiotic prophylaxis for patients undergoing elective endoscopic retrograde cholangiopancreatography. M Brand, D Bisoz. Abstract. Background. Antibiotic prophylaxis for endoscopic retrograde cholangiopancreatography (ERCP) is controversial. We set out to assess the current antibiotic prescribing practice among ...

  3. HYDRATE CORE DRILLING TESTS

    Energy Technology Data Exchange (ETDEWEB)

    John H. Cohen; Thomas E. Williams; Ali G. Kadaster; Bill V. Liddell

    2002-11-01

    The ''Methane Hydrate Production from Alaskan Permafrost'' project is a three-year endeavor being conducted by Maurer Technology Inc. (MTI), Noble, and Anadarko Petroleum, in partnership with the U.S. DOE National Energy Technology Laboratory (NETL). The project's goal is to build on previous and ongoing R&D in the area of onshore hydrate deposition. The project team plans to design and implement a program to safely and economically drill, core and produce gas from arctic hydrates. The current work scope includes drilling and coring one well on Anadarko leases in FY 2003 during the winter drilling season. A specially built on-site core analysis laboratory will be used to determine some of the physical characteristics of the hydrates and surrounding rock. Prior to going to the field, the project team designed and conducted a controlled series of coring tests for simulating coring of hydrate formations. A variety of equipment and procedures were tested and modified to develop a practical solution for this special application. This Topical Report summarizes these coring tests. A special facility was designed and installed at MTI's Drilling Research Center (DRC) in Houston and used to conduct coring tests. Equipment and procedures were tested by cutting cores from frozen mixtures of sand and water supported by casing and designed to simulate hydrate formations. Tests were conducted with chilled drilling fluids. Tests showed that frozen core can be washed out and reduced in size by the action of the drilling fluid. Washing of the core by the drilling fluid caused a reduction in core diameter, making core recovery very difficult (if not impossible). One successful solution was to drill the last 6 inches of core dry (without fluid circulation). These tests demonstrated that it will be difficult to capture core when drilling in permafrost or hydrates without implementing certain safeguards. Among the coring tests was a simulated hydrate

  4. Quality of life of women undergoing treatment for cervical cancer

    Directory of Open Access Journals (Sweden)

    Francieli Ana Dallabrida

    2014-04-01

    Full Text Available This study aimed to evaluate the quality of life of women with cervical cancer. This is a cross-sectional, descriptive study developed with 43 women undergoing oncological treatment assisted at an Oncology High Complexity Center, in the Southern region of Brazil. The instrument used was the European Organization for Research and Treatment of Cancer – Quality of Life Questionnaire Core-30, and the data were analyzed through descriptive statistics. The average age was 54.6 years old. Married women prevailed (53.4%, with incomplete elementary education (72.1% and income from one to two minimum wages (62.8%. Quality of Life was considered very satisfactory. According to the development scales and emotional functioning, the result was from regular to satisfactory. The most frequent symptoms were fatigue, lack of appetite and pain. There is a need of structure of public health policies, for preventing cervical cancer in the most vulnerable population.

  5. Gravitational wave generation by stellar core collapse

    International Nuclear Information System (INIS)

    Moore, T.A.

    1981-01-01

    Stars which have masses greater than 5 to 8 solar masses are thought to undergo a stage of catastrophic core collapse and subsequent supernova explosion at the end of their lives. If the core is not spherically symmetric, the bounce which halts its collapse at transnuclear densities will generate a pulse of gravitational waves. This thesis presents a fully relativistic model of core collapse which treats deviations from spherical symmetry as small perturbations on a spherical background. This model may be used to predict qualitative and quantitative features of the gravitational radiation emitted by stellar cores with odd-parity, axisymmetric fluid perturbations, and represents a first step in the application of perturbative methods to more general asymmetries. The first chapter reviews the present consensus on the physics of core collapse and outlines the important features, assumptions, and limitations of the model. A series of model runs are presented and discussed. Finally, several proposals for future research are presented. Subsequent chapters explore in detail the mathematical features of the present model and its realization on the computer

  6. The core paradox.

    Science.gov (United States)

    Kennedy, G. C.; Higgins, G. H.

    1973-01-01

    Rebuttal of suggestions from various critics attempting to provide an escape from the seeming paradox originated by Higgins and Kennedy's (1971) proposed possibility that the liquid in the outer core was thermally stably stratified and that this stratification might prove a powerful inhibitor to circulation of the outer core fluid of the kind postulated for the generation of the earth's magnetic field. These suggestions are examined and shown to provide no reasonable escape from the core paradox.

  7. Nuclear reactor core flow baffling

    International Nuclear Information System (INIS)

    Berringer, R.T.

    1979-01-01

    A flow baffling arrangement is disclosed for the core of a nuclear reactor. A plurality of core formers are aligned with the grids of the core fuel assemblies such that the high pressure drop areas in the core are at the same elevations as the high pressure drop areas about the core periphery. The arrangement minimizes core bypass flow, maintains cooling of the structure surrounding the core, and allows the utilization of alternative beneficial components such as neutron reflectors positioned near the core

  8. Sediment Core Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides instrumentation and expertise for physical and geoacoustic characterization of marine sediments.DESCRIPTION: The multisensor core logger measures...

  9. Can Psychiatric Rehabilitation Be Core to CORE?

    Science.gov (United States)

    Olney, Marjorie F.; Gill, Kenneth J.

    2016-01-01

    Purpose: In this article, we seek to determine whether psychiatric rehabilitation principles and practices have been more fully incorporated into the Council on Rehabilitation Education (CORE) standards, the extent to which they are covered in four rehabilitation counseling "foundations" textbooks, and how they are reflected in the…

  10. PWR core design calculations

    International Nuclear Information System (INIS)

    Trkov, A.; Ravnik, M.; Zeleznik, N.

    1992-01-01

    Functional description of the programme package Cord-2 for PWR core design calculations is presented. Programme package is briefly described. Use of the package and calculational procedures for typical core design problems are treated. Comparison of main results with experimental values is presented as part of the verification process. (author) [sl

  11. Replaceable LMFBR core components

    International Nuclear Information System (INIS)

    Evans, E.A.; Cunningham, G.W.

    1976-01-01

    Much progress has been made in understanding material and component performance in the high temperature, fast neutron environment of the LMFBR. Current data have provided strong assurance that the initial core component lifetime objectives of FFTF and CRBR can be met. At the same time, this knowledge translates directly into the need for improved core designs that utilize improved materials and advanced fuels required to meet objectives of low doubling times and extended core component lifetimes. An industrial base for the manufacture of quality core components has been developed in the US, and all procurements for the first two core equivalents for FFTF will be completed this year. However, the problem of fabricating recycled plutonium while dramatically reducing fabrication costs, minimizing personnel exposure, and protecting public health and safety must be addressed

  12. Lunar Core and Tides

    Science.gov (United States)

    Williams, J. G.; Boggs, D. H.; Ratcliff, J. T.

    2004-01-01

    Variations in rotation and orientation of the Moon are sensitive to solid-body tidal dissipation, dissipation due to relative motion at the fluid-core/solid-mantle boundary, and tidal Love number k2 [1,2]. There is weaker sensitivity to flattening of the core-mantle boundary (CMB) [2,3,4] and fluid core moment of inertia [1]. Accurate Lunar Laser Ranging (LLR) measurements of the distance from observatories on the Earth to four retroreflector arrays on the Moon are sensitive to lunar rotation and orientation variations and tidal displacements. Past solutions using the LLR data have given results for dissipation due to solid-body tides and fluid core [1] plus Love number [1-5]. Detection of CMB flattening, which in the past has been marginal but improving [3,4,5], now seems significant. Direct detection of the core moment has not yet been achieved.

  13. Internal core tightener

    International Nuclear Information System (INIS)

    Brynsvold, G.V.; Snyder, H.J. Jr.

    1976-01-01

    An internal core tightener is disclosed which is a linear actuated (vertical actuation motion) expanding device utilizing a minimum of moving parts to perform the lateral tightening function. The key features are: (1) large contact areas to transmit loads during reactor operation; (2) actuation cam surfaces loaded only during clamping and unclamping operation; (3) separation of the parts and internal operation involved in the holding function from those involved in the actuation function; and (4) preloaded pads with compliant travel at each face of the hexagonal assembly at the two clamping planes to accommodate thermal expansion and irradiation induced swelling. The latter feature enables use of a ''fixed'' outer core boundary, and thus eliminates the uncertainty in gross core dimensions, and potential for rapid core reactivity changes as a result of core dimensional change. 5 claims, 12 drawing figures

  14. Earth's inner core: Innermost inner core or hemispherical variations?

    NARCIS (Netherlands)

    Lythgoe, K. H.; Deuss, A.|info:eu-repo/dai/nl/412396610; Rudge, J. F.; Neufeld, J. A.

    2014-01-01

    The structure of Earth's deep inner core has important implications for core evolution, since it is thought to be related to the early stages of core formation. Previous studies have suggested that there exists an innermost inner core with distinct anisotropy relative to the rest of the inner core.

  15. Dependence of Core and Extended Flux on Core Dominance ...

    Indian Academy of Sciences (India)

    Abstract. Based on two extragalactic radio source samples, the core dominance parameter is calculated, and the correlations between the core/extended flux density and core dominance parameter are investi- gated. When the core dominance parameter is lower than unity, it is linearly correlated with the core flux density, ...

  16. Korrelasjon mellom core styrke, core stabilitet og utholdende styrke i core

    OpenAIRE

    Berg-Olsen, Andrea Marie; Fugelsøy, Eivor; Maurstad, Ann-Louise

    2010-01-01

    Formålet med studien var å se hvilke korrelasjon det er mellom core styrke, core stabilitet og utholdende styrke i core. Testingen bestod av tre hoveddeler hvor vi testet core styrke, core stabilitet og utholdende styrke i core. Innenfor core styrke og utholdende styrke i core ble tre ulike tester utført. Ved måling av core stabilitet ble det gjennomført kun en test. I core styrke ble isometrisk abdominal fleksjon, isometrisk rygg ekstensjon og isometrisk lateral fleksjon testet. Sit-ups p...

  17. Windscale pile core surveys

    International Nuclear Information System (INIS)

    Curtis, R.F.; Mathews, R.F.

    1996-01-01

    The two Windscale Piles were closed down, defueled as far as possible and mothballed for thirty years following a fire in the core of Pile 1 in 1957 resulting from the spontaneous release of stored Wigner energy in the graphite moderator. Decommissioning of the reactors commenced in 1987 and has reached the stage where the condition of both cores needs to be determined. To this end, non-intrusive and intrusive surveys and sampling of the cores have been planned and partly implemented. The objectives for each Pile differ slightly. The location and quantity of fuel remaining in the damaged core of Pile 1 needed to be established, whereas the removal of all fuel from Pile 2 needed to be confirmed. In Pile 1, the possible existence of a void in the core is to be explored and in Pile 2, the level of Wigner energy remaining required to be quantified. Levels of radioactivity in both cores needed to be measured. The planning of the surveys is described including strategy, design, safety case preparation and the remote handling and viewing equipment required to carry out the inspection, sampling and monitoring work. The results from the completed non-intrusive survey of Pile 2 are summarised. They confirm that the core is empty and the graphite is in good condition. The survey of Pile 1 has just started. (UK)

  18. Modelling hypothermia in patients undergoing surgery

    NARCIS (Netherlands)

    Severens, N.M.W.

    2008-01-01

    Anesthesia causes substantial perturbation in the human heat balance. Nearly all patients administered anesthesia become hypothermic. Under normal physiological conditions, the core-to-peripheral temperature gradient is maintained by tonic vasoconstriction. By the induction of anesthesia,

  19. Core shroud corner joints

    Science.gov (United States)

    Gilmore, Charles B.; Forsyth, David R.

    2013-09-10

    A core shroud is provided, which includes a number of planar members, a number of unitary corners, and a number of subassemblies each comprising a combination of the planar members and the unitary corners. Each unitary corner comprises a unitary extrusion including a first planar portion and a second planar portion disposed perpendicularly with respect to the first planar portion. At least one of the subassemblies comprises a plurality of the unitary corners disposed side-by-side in an alternating opposing relationship. A plurality of the subassemblies can be combined to form a quarter perimeter segment of the core shroud. Four quarter perimeter segments join together to form the core shroud.

  20. IGCSE core mathematics

    CERN Document Server

    Wall, Terry

    2013-01-01

    Give your core level students the support and framework they require to get their best grades with this book dedicated to the core level content of the revised syllabus and written specifically to ensure a more appropriate pace. This title has been written for Core content of the revised Cambridge IGCSE Mathematics (0580) syllabus for first teaching from 2013. ? Gives students the practice they require to deepen their understanding through plenty of practice questions. ? Consolidates learning with unique digital resources on the CD, included free with every book. We are working with Cambridge

  1. Heterogeneous gas core reactor

    International Nuclear Information System (INIS)

    Diaz, N.J.; Dugan, E.T.

    1983-01-01

    A heterogeneous gas core nuclear reactor is disclosed comprising a core barrel provided interiorly with an array of moderator-containing tubes and being otherwise filled with a fissile and/or fertile gaseous fuel medium. The fuel medium may be flowed through the chamber and through an external circuit in which heat is extracted. The moderator may be a fluid which is flowed through the tubes and through an external circuit in which heat is extracted. The moderator may be a solid which may be cooled by a fluid flowing within the tubes and through an external heat extraction circuit. The core barrel is surrounded by moderator/coolant material. Fissionable blanket material may be disposed inwardly or outwardly of the core barrel

  2. iPSC Core

    Data.gov (United States)

    Federal Laboratory Consortium — The induced Pluripotent Stem Cells (iPSC) Core was created in 2011 to accelerate stem cell research in the NHLBI by providing investigators consultation, technical...

  3. Core Flight Software

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Core Flight Software (CFS) project purpose is to analyze applicability, and evolve and extend the reusability of the CFS system originally developed by...

  4. PWR degraded core analysis

    International Nuclear Information System (INIS)

    Gittus, J.H.

    1982-04-01

    A review is presented of the various phenomena involved in degraded core accidents and the ensuing transport of fission products from the fuel to the primary circuit and the containment. The dominant accident sequences found in the PWR risk studies published to date are briefly described. Then chapters deal with the following topics: the condition and behaviour of water reactor fuel during normal operation and at the commencement of degraded core accidents; the generation of hydrogen from the Zircaloy-steam and the steel-steam reactions; the way in which the core deforms and finally melts following loss of coolant; debris relocation analysis; containment integrity; fission product behaviour during a degraded core accident. (U.K.)

  5. Restraint system for core elements of a reactor core

    International Nuclear Information System (INIS)

    Class, G.

    1975-01-01

    In a nuclear reactor, a core element bundle formed of a plurality of side-by-side arranged core elements is surrounded by restraining elements that exert a radially inwardly directly restraining force generating friction forces between the core elements in a restraining plane that is transverse to the core element axes. The adjoining core elements are in rolling contact with one another in the restraining plane by virtue of rolling-type bearing elements supported in the core elements. (Official Gazette)

  6. Heterogeneous gas core reactor

    International Nuclear Information System (INIS)

    Han, K.I.

    1977-01-01

    Preliminary investigations of a heterogeneous gas core reactor (HGCR) concept suggest that this potential power reactor offers distinct advantages over other existing or conceptual reactor power plants. One of the most favorable features of the HGCR is the flexibility of the power producing system which allows it to be efficiently designed to conform to a desired optimum condition without major conceptual changes. The arrangement of bundles of moderator/coolant channels in a fissionable gas or mixture of gases makes a truly heterogeneous nuclear reactor core. It is this full heterogeneity for a gas-fueled reactor core which accounts for the novelty of the heterogeneous gas core reactor concept and leads to noted significant advantages over previous gas core systems with respect to neutron and fuel economy, power density, and heat transfer characteristics. The purpose of this work is to provide an insight into the design, operating characteristics, and safety of a heterogeneous gas core reactor system. The studies consist mainly of neutronic, energetic and kinetic analyses of the power producing and conversion systems as a preliminary assessment of the heterogeneous gas core reactor concept and basic design. The results of the conducted research indicate a high potential for the heterogeneous gas core reactor system as an electrical power generating unit (either large or small), with an overall efficiency as high as 40 to 45%. The HGCR system is found to be stable and safe, under the conditions imposed upon the analyses conducted in this work, due to the inherent safety of ann expanding gaseous fuel and the intrinsic feedback effects of the gas and water coolant

  7. FBR type reactor core

    International Nuclear Information System (INIS)

    Tamiya, Tadashi; Kawashima, Katsuyuki; Fujimura, Koji; Murakami, Tomoko.

    1995-01-01

    Neutron reflectors are disposed at the periphery of a reactor core fuel region and a blanket region, and a neutron shielding region is disposed at the periphery of them. The neutron reflector has a hollow duct structure having a sealed upper portion, a lower portion opened to cooling water, in which a gas and coolants separately sealed in the inside thereof. A driving pressure of a primary recycling pump is lowered upon reduction of coolant flow rate, then the liquid level of coolants in the neutron reflector is lowered due to imbalance between the driving pressure and a gas pressure, so that coolants having an effect as a reflector are eliminated from the outer circumference of the reactor core. Therefore, the amount of neutrons leaking from the reactor core is increased, and negative reactivity is charged to the reactor core. The negative reactivity of the neutron reflector is made greater than a power compensation reactivity. Since this enables reactor scram by using an inherent performance of the reactor core, the reactor core safety of an LMFBR-type reactor can be improved. (I.N.)

  8. The earths innermost core

    International Nuclear Information System (INIS)

    Nanda, J.N.

    1989-01-01

    A new earth model is advanced with a solid innermost core at the centre of the Earth where elements heavier than iron, over and above what can be retained in solution in the iron core, are collected. The innermost core is separated from the solid iron-nickel core by a shell of liquid copper. The innermost core has a natural vibration measured on the earth's surface as the long period 26 seconds microseisms. The earth was formed initially as a liquid sphere with a relatively thin solid crust above the Byerly discontinuity. The trace elements that entered the innermost core amounted to only 0.925 ppm of the molten mass. Gravitational differentiation must have led to the separation of an explosive thickness of pure 235 U causing a fission explosion that could expel beyond the Roche limit a crustal scab which would form the centre piece of the moon. A reservoir of helium floats on the liquid copper. A small proportion of helium-3, a relic of the ancient fission explosion present there will spell the exciting magnetic field. The field is stable for thousands of years because of the presence of large quantity of helium-4 which accounts for most of the gaseous collisions that will not disturb the atomic spin of helium-3 atoms. This field is prone to sudden reversals after long periods of stability. (author). 14 refs

  9. Aspirin in patients undergoing noncardiac surgery

    DEFF Research Database (Denmark)

    Devereaux, P J; Mrkobrada, Marko; Sessler, Daniel I

    2014-01-01

    BACKGROUND: There is substantial variability in the perioperative administration of aspirin in patients undergoing noncardiac surgery, both among patients who are already on an aspirin regimen and among those who are not. METHODS: Using a 2-by-2 factorial trial design, we randomly assigned 10......,010 patients who were preparing to undergo noncardiac surgery and were at risk for vascular complications to receive aspirin or placebo and clonidine or placebo. The results of the aspirin trial are reported here. The patients were stratified according to whether they had not been taking aspirin before...... the study (initiation stratum, with 5628 patients) or they were already on an aspirin regimen (continuation stratum, with 4382 patients). Patients started taking aspirin (at a dose of 200 mg) or placebo just before surgery and continued it daily (at a dose of 100 mg) for 30 days in the initiation stratum...

  10. Platelet activation in outpatients undergoing esophagogastroduodenoscopy

    International Nuclear Information System (INIS)

    Sagripanti, A.; Polloni, A.; Materazzi, F.; Ferdeghini, M.; Pinori, E.; Bianchi, R.

    1989-01-01

    To evaluate the influence of emotional stress on platelet function mesured by radioimmunoassay in plasma two platelet factor 4, in a series of outpatients undergoing esophagogastroduodenoscopy for upper digestive complaints has been measured. The plasma levels of β-thromboglobulin and platelet factor 4, determined just before the instrumental examination, were significantly more elevated as compared to basal values, checked a week later. These results provide evidence of enhanced in vivo platelet release reaction during emotional stress

  11. Coagulation management in patients undergoing neurosurgical procedures.

    Science.gov (United States)

    Robba, Chiara; Bertuetti, Rita; Rasulo, Frank; Bertuccio, Alessando; Matta, Basil

    2017-10-01

    Management of coagulation in neurosurgical procedures is challenging. In this contest, it is imperative to avoid further intracranial bleeding. Perioperative bleeding can be associated with a number of factors, including anticoagulant drugs and coagulation status but is also linked to the characteristic and the site of the intracranial disorder. The aim of this review will be to focus primarily on the new evidence regarding the management of coagulation in patients undergoing craniotomy for neurosurgical procedures. Antihemostatic and anticoagulant drugs have shown to be associated with perioperative bleeding. On the other hand, an increased risk of venous thromboembolism and hypercoagulative state after elective and emergency neurosurgery, in particular after brain tumor surgery, has been described in several patients. To balance the risk between thrombosis and bleeding, it is important to be familiar with the perioperative changes in coagulation and with the recent management guidelines for anticoagulated patients undergoing neurosurgical procedures, in particular for those taking new direct anticoagulants. We have considered the current clinical trials and literature regarding both safety and efficacy of deep venous thrombosis prophylaxis in the neurosurgical population. These were mainly trials concerning both elective surgical and intensive care patients with a poor grade intracranial bleed or multiple traumas with an associated severe traumatic brain injury (TBI). Coagulation management remains a major issue in patients undergoing neurosurgical procedures. However, in this field of research, literature quality is poor and further studies are necessary to identify the best strategies to minimize risks in this group of patients.

  12. Reactor core control device

    International Nuclear Information System (INIS)

    Sano, Hiroki

    1998-01-01

    The present invention provides a reactor core control device, in which switching from a manual operation to an automatic operation, and the control for the parameter of an automatic operation device are facilitated. Namely, the hysteresis of the control for the operation parameter by an manual operation input means is stored. The hysteresis of the control for the operation parameter is collected. The state of the reactor core simulated by an operation control to which the collected operation parameters are manually inputted is determined as an input of the reactor core state to the automatic input means. The record of operation upon manual operation is stored as a hysteresis of control for the operation parameter, but the hysteresis information is not only the result of manual operation of the operation parameter. This is results of operation conducted by a skilled operator who judge the state of the reactor core to be optimum. Accordingly, it involves information relevant to the reactor core state. Then, it is considered that the optimum automatic operation is not deviated greatly from the manual operation. (I.S.)

  13. The PWR cores management

    International Nuclear Information System (INIS)

    Barral, J.C.; Rippert, D.; Johner, J.

    2000-01-01

    During the meeting of the 25 january 2000, organized by the SFEN, scientists and plant operators in the domain of the PWR debated on the PWR cores management. The five first papers propose general and economic information on the PWR and also the fast neutron reactors chains in the electric power market: statistics on the electric power industry, nuclear plant unit management, the ITER project and the future of the thermonuclear fusion, the treasurer's and chairman's reports. A second part offers more technical papers concerning the PWR cores management: performance and optimization, in service load planning, the cores management in the other countries, impacts on the research and development programs. (A.L.B.)

  14. Molten core retention assembly

    International Nuclear Information System (INIS)

    Lampe, R.F.

    1976-01-01

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods

  15. Core status computing system

    International Nuclear Information System (INIS)

    Yoshida, Hiroyuki.

    1982-01-01

    Purpose: To calculate power distribution, flow rate and the like in the reactor core with high accuracy in a BWR type reactor. Constitution: Total flow rate signals, traverse incore probe (TIP) signals as the neutron detector signals, thermal power signals and pressure signals are inputted into a process computer, where the power distribution and the flow rate distribution in the reactor core are calculated. A function generator connected to the process computer calculates the absolute flow rate passing through optional fuel assemblies using, as variables, flow rate signals from the introduction part for fuel assembly flow rate signals, data signals from the introduction part for the geometrical configuration data at the flow rate measuring site of fuel assemblies, total flow rate signals for the reactor core and the signals from the process computer. Numerical values thus obtained are given to the process computer as correction signals to perform correction for the experimental data. (Moriyama, K.)

  16. TMI-2 core examination

    International Nuclear Information System (INIS)

    Hobbins, R.R.; MacDonald, P.E.; Owen, D.E.

    1983-01-01

    The examination of the damaged core at the Three Mile Island Unit 2 (TMI-2) reactor is structured to address the following safety issues: fission product release, transport, and deposition; core coolability; containment integrity; and recriticality during severe accidents; as well as zircaloy cladding ballooning and oxidation during so-called design basis accidents. The numbers of TMI-2 components or samples to be examined, the priority of each examination, the safety issue addressed by each examination, the principal examination techniques to be employed, and the data to be obtained and the principal uses of the data are discussed in this paper

  17. Superconducting tin core fiber

    International Nuclear Information System (INIS)

    Homa, Daniel; Liang, Yongxuan; Hill, Cary; Kaur, Gurbinder; Pickrell, Gary

    2015-01-01

    In this study, we demonstrated superconductivity in a fiber with a tin core and fused silica cladding. The fibers were fabricated via a modified melt-draw technique and maintained core diameters ranging from 50-300 microns and overall diameters of 125-800 microns. Superconductivity of this fiber design was validated via the traditional four-probe test method in a bath of liquid helium at temperatures on the order of 3.8 K. The synthesis route and fiber design are perquisites to ongoing research dedicated all-fiber optoelectronics and the relationships between superconductivity and the material structures, as well as corresponding fabrication techniques. (orig.)

  18. LMFBR core design analysis

    International Nuclear Information System (INIS)

    Cho, M.; Yang, J.C.; Yoh, K.C.; Suk, S.D.; Soh, D.S.; Kim, Y.M.

    1980-01-01

    The design parameters of a commercial-scale fast breeder reactor which is currently under construction by regeneration of these data is preliminary analyzed. The analysis of nuclear and thermal characteristics as well as safety features of this reactor is emphasized. And the evaluation of the initial core mentioned in the system description is carried out in the areas of its kinetics and control system, and, at the same time, the flow distribution of sodium and temperature distribution of the initial FBR core system are calculated. (KAERI INIS Section)

  19. Nuclear core catchers

    International Nuclear Information System (INIS)

    Golden, M.P.; Tilbrook, R.W.; Heylmun, N.F.

    1976-01-01

    A receptacle is described for taking the molten fragments of a nuclear reactor during a reactor core fusion accident. The receptacle is placed under the reactor. It includes at least one receptacle for the reactor core fragments, with a dome shaped part to distribute the molten fragments and at least one outside layer of alumina bricks around the dome. The characteristic of this receptacle is that the outer layer of bricks contains neutron poison rods which pass through the bricks and protrude in relation to them [fr

  20. Organizing Core Tasks

    DEFF Research Database (Denmark)

    Boll, Karen

    has remained much the same within the last 10 years. However, how the core task has been organized has changed considerable under the influence of various “organizing devices”. The paper focusses on how organizing devices such as risk assessment, output-focus, effect orientation, and treatment...... projects influence the organization of core tasks within the tax administration. The paper shows that the organizational transformations based on the use of these devices have had consequences both for the overall collection of revenue and for the employees’ feeling of “making a difference”. All in all...

  1. GREEN CORE HOUSE

    Directory of Open Access Journals (Sweden)

    NECULAI Oana

    2017-05-01

    Full Text Available The Green Core House is a construction concept with low environmental impact, having as main central element a greenhouse. The greenhouse has the innovative role to use the biomass energy provided by plants to save energy. Although it is the central piece, the greenhouse is not the most innovative part of the Green Core House, but the whole building ensemble because it integrates many other sustainable systems as "waste purification systems", "transparent photovoltaic panels" or "double skin façades".

  2. PWR core design calculations

    Energy Technology Data Exchange (ETDEWEB)

    Trkov, A; Ravnik, M; Zeleznik, N [Inst. Jozef Stefan, Ljubljana (Slovenia)

    1992-07-01

    Functional description of the programme package Cord-2 for PWR core design calculations is presented. Programme package is briefly described. Use of the package and calculational procedures for typical core design problems are treated. Comparison of main results with experimental values is presented as part of the verification process. (author) [Slovenian] Opisali smo programski paket CORD-2, ki se uporablja pri projektnih izracunih sredice pri upravljanju tlacnovodnega reaktorja. Prikazana je uporaba paketa in racunskih postopkov za tipicne probleme, ki nastopajo pri projektiranju sredice. Primerjava glavnih rezultatov z eksperimentalnimi vrednostmi je predstavljena kot del preveritvenega procesa. (author)

  3. Principles and core functions of integrated child health information systems.

    Science.gov (United States)

    Hinman, Alan R; Atkinson, Delton; Diehn, Tonya Norvell; Eichwald, John; Heberer, Jennifer; Hoyle, Therese; King, Pam; Kossack, Robert E; Williams, Donna C; Zimmerman, Amy

    2004-11-01

    Infants undergo a series of preventive and therapeutic health interventions and activities. Typically, each activity includes collection and submission of data to a dedicated information system. Subsequently, health care providers, families, and health programs must query each information system to determine the child's status in a given area. Efforts are underway to integrate information in these separate information systems. This requires specifying the core functions that integrated information systems must perform.

  4. Maximum stellar iron core mass

    Indian Academy of Sciences (India)

    An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is significantly ...

  5. WIMS/PANTHER analysis of UO2/MOX cores using embedded super-cells

    International Nuclear Information System (INIS)

    Knight, M.; Bryce, P.; Hall, S.

    2012-01-01

    This paper describes a method of analysing PWR UO 2 MOX cores with WIMS/PANTHER. Embedded super-cells, run within the reactor code, are used to correct the standard methodology of using 2-group smeared data from single assembly lattice calculations. In many other codes the weakness of this standard approach has been improved for MOX by imposing a more realistic environment in the lattice code, or by improving the sophistication of the reactor code. In this approach an intermediate set of calculations is introduced, leaving both lattice and reactor calculations broadly unchanged. The essence of the approach is that the whole core is broken down into a set of 'embedded' super-cells, each extending over just four quarter assemblies, with zero leakage imposed at the assembly mid-lines. Each supercell is solved twice, first with a detailed multi-group pin-by-pin solution, and then with the standard single assembly approach. Correction factors are defined by comparing the two solutions, and these can be applied in whole core calculations. The restriction that all such calculations are modelled with zero leakage means that they are independent of each other and of the core-wide flux shape. This allows parallel pre-calculation for the entire cycle once the loading pattern has been determined, in much the same way that single assembly lattice calculations can be pre-calculated once the range of fuel types is known. Comparisons against a whole core pin-by-pin reference demonstrates that the embedding process does not introduce a significant error, even after burnup and refuelling. Comparisons against a WIMS reference demonstrate that a pin-by-pin multi-group diffusion solution is capable of capturing the main interface effects. This therefore defines a practical approach for achieving results close to lattice code accuracy, but broadly at the cost of a standard reactor calculation. (authors)

  6. WIMS/PANTHER analysis of UO{sub 2}/MOX cores using embedded super-cells

    Energy Technology Data Exchange (ETDEWEB)

    Knight, M.; Bryce, P. [EDF Energy, Barnett Way, Barnwood, Gloucester (United Kingdom); Hall, S. [Advanced Modelling and Computation Group, Imperial College, London (United Kingdom)

    2012-07-01

    This paper describes a method of analysing PWR UO{sub 2}MOX cores with WIMS/PANTHER. Embedded super-cells, run within the reactor code, are used to correct the standard methodology of using 2-group smeared data from single assembly lattice calculations. In many other codes the weakness of this standard approach has been improved for MOX by imposing a more realistic environment in the lattice code, or by improving the sophistication of the reactor code. In this approach an intermediate set of calculations is introduced, leaving both lattice and reactor calculations broadly unchanged. The essence of the approach is that the whole core is broken down into a set of 'embedded' super-cells, each extending over just four quarter assemblies, with zero leakage imposed at the assembly mid-lines. Each supercell is solved twice, first with a detailed multi-group pin-by-pin solution, and then with the standard single assembly approach. Correction factors are defined by comparing the two solutions, and these can be applied in whole core calculations. The restriction that all such calculations are modelled with zero leakage means that they are independent of each other and of the core-wide flux shape. This allows parallel pre-calculation for the entire cycle once the loading pattern has been determined, in much the same way that single assembly lattice calculations can be pre-calculated once the range of fuel types is known. Comparisons against a whole core pin-by-pin reference demonstrates that the embedding process does not introduce a significant error, even after burnup and refuelling. Comparisons against a WIMS reference demonstrate that a pin-by-pin multi-group diffusion solution is capable of capturing the main interface effects. This therefore defines a practical approach for achieving results close to lattice code accuracy, but broadly at the cost of a standard reactor calculation. (authors)

  7. Speech profile of patients undergoing primary palatoplasty.

    Science.gov (United States)

    Menegueti, Katia Ignacio; Mangilli, Laura Davison; Alonso, Nivaldo; Andrade, Claudia Regina Furquim de

    2017-10-26

    To characterize the profile and speech characteristics of patients undergoing primary palatoplasty in a Brazilian university hospital, considering the time of intervention (early, before two years of age; late, after two years of age). Participants were 97 patients of both genders with cleft palate and/or cleft and lip palate, assigned to the Speech-language Pathology Department, who had been submitted to primary palatoplasty and presented no prior history of speech-language therapy. Patients were divided into two groups: early intervention group (EIG) - 43 patients undergoing primary palatoplasty before 2 years of age and late intervention group (LIG) - 54 patients undergoing primary palatoplasty after 2 years of age. All patients underwent speech-language pathology assessment. The following parameters were assessed: resonance classification, presence of nasal turbulence, presence of weak intraoral air pressure, presence of audible nasal air emission, speech understandability, and compensatory articulation disorder (CAD). At statistical significance level of 5% (p≤0.05), no significant difference was observed between the groups in the following parameters: resonance classification (p=0.067); level of hypernasality (p=0.113), presence of nasal turbulence (p=0.179); presence of weak intraoral air pressure (p=0.152); presence of nasal air emission (p=0.369), and speech understandability (p=0.113). The groups differed with respect to presence of compensatory articulation disorders (p=0.020), with the LIG presenting higher occurrence of altered phonemes. It was possible to assess the general profile and speech characteristics of the study participants. Patients submitted to early primary palatoplasty present better speech profile.

  8. Thromboprophylaxis for women undergoing caesarean section.

    LENUS (Irish Health Repository)

    Kennedy, C

    2012-02-01

    Thromboprophylaxis for women undergoing caesarean section (CS) was introduced in the hospital in 1995. This study audited the use of tinzaparin prophylaxis in a nested cohort of women who screened negative for diabetes mellitus at 28 weeks gestation. All the women had their weight measured and BMI calculated at the first antenatal visit. Of the 284 women, 68 (24%) had a CS and all received tinzaparin. Of the 68, however, 94% received a dose lower than recommended. Compliance with prophylaxis was complete but compliance with the recommended dosage was suboptimal, which may result in venous thromboembolism after CS despite thromboprophylaxis.

  9. Dermatillomania: In patient undergoing orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Adit

    2014-01-01

    Full Text Available Dermatillomania is a disorder in which a person habitually picks their skin, and this is a form of self-injury. It can involve any part of the body, but usually involves the face, neck, arms and shoulders. Symptoms often follow an event that has caused severe emotional distress. A dermatillomania or compulsive skin picking episode may be a conscious response to anxiety or depression but is frequently done as an unconscious habit. In this case report, a patient undergoing orthodontic treatment was found to be suffering from dermatillomania and was treated using psychological counseling.

  10. Care of patients undergoing external radiotherapy

    International Nuclear Information System (INIS)

    Lang, C.

    1977-01-01

    The anxiety and associated depression suffered by most patients undergoing radiotherapy is discussed and the possibilities open to the nurse to encourage and reassure patients thus facilitating physical care are considered. The general symptoms of anorexia, nausea, tiredness, skin problems, alopecia, bonemarrow depresssion and rapid tumour destruction are described and nursing care prescribed. The side-effects which may occur following radiation of the brain, head and neck region, eyes, oesophagus, lung, abdomen, pelvis, bones, skin, spine, and spinal cord are considered from the nursing standpoint. The specialised subject of radiotherapy in children is discussed briefly. (U.K.)

  11. Benchmarking and qualification of the NUFREQ-NPW code for best estimate prediction of multi-channel core stability margins

    International Nuclear Information System (INIS)

    Taleyarkhan, R.; Lahey, R.T. Jr.; McFarlane, A.F.; Podowski, M.Z.

    1988-01-01

    The NUFREQ-NPW code was modified and set up at Westinghouse, USA for mixed fuel type multi-channel core-wide stability analysis. The resulting code, NUFREQ-NPW, allows for variable axial power profiles between channel groups and can handle mixed fuel types. Various models incorporated into NUFREQ-NPW were systematically compared against the Westinghouse channel stability analysis code MAZDA-NF, for which the mathematical model was developed, in an entirely different manner. Excellent agreement was obtained which verified the thermal-hydraulic modeling and coding aspects. Detailed comparisons were also performed against nuclear-coupled reactor core stability data. All thirteen Peach Bottom-2 EOC-2/3 low flow stability tests were simulated. A key aspect for code qualification involved the development of a physically based empirical algorithm to correct for the effect of core inlet flow development on subcooled boiling. Various other modeling assumptions were tested and sensitivity studies performed. Good agreement was obtained between NUFREQ-NPW predictions and data. Moreover, predictions were generally on the conservative side. The results of detailed direct comparisons with experimental data using the NUFREQ-NPW code; have demonstrated that BWR core stability margins are conservatively predicted, and all data trends are captured with good accuracy. The methodology is thus suitable for BWR design and licensing purposes. 11 refs., 12 figs., 2 tabs

  12. Nuclear core baffling apparatus

    International Nuclear Information System (INIS)

    Cooper, F.W. Jr.; Silverblatt, B.L.; Knight, C.B.; Berringer, R.T.

    1979-01-01

    An apparatus for baffling the flow of reactor coolant fluid into and about the core of a nuclear reactor is described. The apparatus includes a plurality of longitudinally aligned baffle plates with mating surfaces that allow longitudinal growth with temperature increases while alleviating both leakage through the aligned plates and stresses on the components supporting the plates

  13. The Uncommon Core

    Science.gov (United States)

    Ohler, Jason

    2013-01-01

    This author contends that the United States neglects creativity in its education system. To see this, he states, one may look at the Common Core State Standards. If one searches the English Language Arts and Literacy standards for the words "creative," "innovative," and "original"--and any associated terms, one will…

  14. Utah's New Mathematics Core

    Science.gov (United States)

    Utah State Office of Education, 2011

    2011-01-01

    Utah has adopted more rigorous mathematics standards known as the Utah Mathematics Core Standards. They are the foundation of the mathematics curriculum for the State of Utah. The standards include the skills and understanding students need to succeed in college and careers. They include rigorous content and application of knowledge and reflect…

  15. Some Core Contested Concepts

    Science.gov (United States)

    Chomsky, Noam

    2015-01-01

    Core concepts of language are highly contested. In some cases this is legitimate: real empirical and conceptual issues arise. In other cases, it seems that controversies are based on misunderstanding. A number of crucial cases are reviewed, and an approach to language is outlined that appears to have strong conceptual and empirical motivation, and…

  16. Reactor core structure

    International Nuclear Information System (INIS)

    Higashinakagawa, Emiko; Sato, Kanemitsu.

    1992-01-01

    Taking notice on the fact that Fe based alloys and Ni based alloys are corrosion resistant in a special atmosphere of a nuclear reactor, Fe or Ni based alloys are applied to reactor core structural components such as fuel cladding tubes, fuel channels, spacers, etc. On the other hand, the neutron absorption cross section of zirconium is 0.18 barn while that of iron is 2.52 barn and that of nickel is 4.6 barn, which amounts to 14 to 25 times compared with that of zirconium. Accordingly, if the reactor core structural components are constituted by the Fe or Ni based alloys, neutron economy is lowered. Since it is desirable that neutrons contribute to uranium fission with least absorption to the reactor core structural components, the reactor core structural components are constituted with the Fe or Ni based alloys of good corrosion resistance only at a portion in contact with reactor water, that is, at a surface portion, while the main body is constituted with zircalloy in the present invention. Accordingly, corrosion resistnace can be kept while keeping small neutron absorption cross section. (T.M.)

  17. Investigation of EAS cores

    Directory of Open Access Journals (Sweden)

    Shaulov S.B.

    2017-01-01

    Full Text Available The development of nuclear-electromagnetic cascade models in air in the late forties have shown informational content of the study of cores of extensive air showers (EAS. These investigations were the main goal in different experiments which were carried out over many years by a variety of methods. Outcomes of such investigations obtained in the HADRON experiment using an X-ray emulsion chamber (XREC as a core detector are considered. The Ne spectrum of EAS associated with γ-ray families, spectra of γ-rays (hadrons in EAS cores and the Ne dependence of the muon number, ⟨Nμ⟩, in EAS with γ-ray families are obtained for the first time at energies of 1015–1017 eV with this method. A number of new effects were observed, namely, an abnormal scaling violation in hadron spectra which are fundamentally different from model predictions, an excess of muon number in EAS associated with γ-ray families, and the penetrating component in EAS cores. It is supposed that the abnormal behavior of γ-ray spectra and Ne dependence of the muon number are explained by the emergence of a penetrating component in the 1st PCR spectrum ‘knee’ range. Nuclear and astrophysical explanations of the origin of the penetrating component are discussed. The necessity of considering the contribution of a single close cosmic-ray source to explain the PCR spectrum in the knee range is noted.

  18. Plutonium cores of zenith

    Energy Technology Data Exchange (ETDEWEB)

    Barclay, F R; Cameron, I R; Drageset, A; Freemantle, R G; Wilson, D J

    1965-03-15

    The report describes a series of experiments carried out with plutonium fuel in the heated zero power reactor ZENITH, with the aim of testing current theoretical methods, with particular reference to excess reactivity, temperature coefficients, differential spectrum and reaction rate distributions. Two cores of widely different fissile/moderator atom ratios were loaded in order to test the theory under significantly varied spectrum conditions.

  19. Core damage risk indicators

    International Nuclear Information System (INIS)

    Szikszai, T.

    1994-01-01

    The purpose of this document is to show a method for the fast recalculation of the PSA. To avoid the information loose, it is necessary to simplify the PSA models, or at least reorganize them. The method, introduced in this document, require that preparation, so we try to show, how to do that. This document is an introduction. This is the starting point of the work related to the development of the risk indicators. In the future, with the application of this method, we are going to show an everyday use of the PSA results to produce the indicators of the core damage risk. There are two different indicators of the plant safety performance, related to the core damage risk. The first is the core damage frequency indicator (CDFI), and the second is the core damage probability indicator (CDPI). Of course, we cannot describe all of the possible ways to use these indicators, rather we will try to introduce the requirements to establish such an indicator system and the calculation process

  20. Core calculations of JMTR

    Energy Technology Data Exchange (ETDEWEB)

    Nagao, Yoshiharu [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    1998-03-01

    In material testing reactors like the JMTR (Japan Material Testing Reactor) of 50 MW in Japan Atomic Energy Research Institute, the neutron flux and neutron energy spectra of irradiated samples show complex distributions. It is necessary to assess the neutron flux and neutron energy spectra of an irradiation field by carrying out the nuclear calculation of the core for every operation cycle. In order to advance core calculation, in the JMTR, the application of MCNP to the assessment of core reactivity and neutron flux and spectra has been investigated. In this study, in order to reduce the time for calculation and variance, the comparison of the results of the calculations by the use of K code and fixed source and the use of Weight Window were investigated. As to the calculation method, the modeling of the total JMTR core, the conditions for calculation and the adopted variance reduction technique are explained. The results of calculation are shown. Significant difference was not observed in the results of neutron flux calculations according to the difference of the modeling of fuel region in the calculations by K code and fixed source. The method of assessing the results of neutron flux calculation is described. (K.I.)

  1. Emergency core cooling system

    International Nuclear Information System (INIS)

    Kato, Ken.

    1989-01-01

    In PWR type reactors, a cooling water spray portion of emergency core cooling pipelines incorporated into pipelines on high temperature side is protruded to the inside of an upper plenum. Upon rupture of primary pipelines, pressure in a pressure vessel is abruptly reduced to generate a great amount of steams in the reactor core, which are discharged at a high flow rate into the primary pipelines on high temperature side. However, since the inside of the upper plenum has a larger area and the steam flow is slow, as compared with that of the pipelines on the high temperature side, ECCS water can surely be supplied into the reactor core to promote the re-flooding of the reactor core and effectively cool the reactor. Since the nuclear reactor can effectively be cooled to enable the promotion of pressure reduction and effective supply of coolants during the period of pressure reduction upon LOCA, the capacity of the pressure accumulation vessel can be decreased. Further, the re-flooding time for the reactor is shortened to provide an effect contributing to the improvement of the safety and the reduction of the cost. (N.H.)

  2. Inflation targeting and core inflation

    OpenAIRE

    Julie Smith

    2005-01-01

    This paper examines the interaction of core inflation and inflation targeting as a monetary policy regime. Interest in core inflation has grown because of inflation targeting. Core inflation is defined in numerous ways giving rise to many potential measures; this paper defines core inflation as the best forecaster of inflation. A cross-country study finds before the start of inflation targeting, but not after, core inflation differs between non-inflation targeters and inflation targeters. Thr...

  3. CORE annual report 2006; CORE Jahresbericht 2006

    Energy Technology Data Exchange (ETDEWEB)

    Gut, A

    2007-04-15

    This annual report for the Swiss Federal Office of Energy (SFOE) summarises the activities of the Swiss Federal Commission on Energy Research CORE in 2006. The six main areas of work during the period 2004 - 2007 are examined, including a review of the SFOE's energy research programme, a road-map for the way towards the realisation of a 2000-watt society, the formulation of an energy research concept for 2008 - 2011, international co-operation, the dissemination of information and the assessment of existing and new instruments. International activities and Switzerland's involvement in energy research within the framework of the International Energy Agency IEA are discussed. New and existing projects are listed and the work done at the Competence Centre for Energy and Mobility noted. The Swiss Technology Award 2007 is presented. Information supplied to interested bodies to help improve knowledge on research work being done and to help make discussions on future energy supply more objective is discussed.

  4. Ice cores and palaeoclimate

    International Nuclear Information System (INIS)

    Krogh Andersen, K.; Ditlevsen, P.; Steffensen, J.P.

    2001-01-01

    Ice cores from Greenland give testimony of a highly variable climate during the last glacial period. Dramatic climate warmings of 15 to 25 deg. C for the annual average temperature in less than a human lifetime have been documented. Several questions arise: Why is the Holocene so stable? Is climatic instability only a property of glacial periods? What is the mechanism behind the sudden climate changes? Are the increased temperatures in the past century man-made? And what happens in the future? The ice core community tries to attack some of these problems. The NGRIP ice core currently being drilled is analysed in very high detail, allowing for a very precise dating of climate events. It will be possible to study some of the fast changes on a year by year basis and from this we expect to find clues to the sequence of events during rapid changes. New techniques are hoped to allow for detection of annual layers as far back as 100,000 years and thus a much improved time scale over past climate changes. It is also hoped to find ice from the Eemian period. If the Eemian layers confirm the GRIP sequence, the Eemian was actually climatically unstable just as the glacial period. This would mean that the stability of the Holocene is unique. It would also mean, that if human made global warming indeed occurs, we could jeopardize the Holocene stability and create an unstable 'Eemian situation' which ultimately could start an ice age. Currenlty mankind is changing the composition of the atmosphere. Ice cores document significant increases in greenhouse gases, and due to increased emissions of sulfuric and nitric acid from fossil fuel burning, combustion engines and agriculture, modern Greenland snow is 3 - 5 times more acidic than pre-industrial snow (Mayewski et al., 1986). However, the magnitude and abruptness of the temperature changes of the past century do not exceed the magnitude of natural variability. It is from the ice core perspective thus not possible to attribute the

  5. Emergency core cooling device

    International Nuclear Information System (INIS)

    Suzaki, Kiyoshi; Inoue, Akihiro.

    1979-01-01

    Purpose: To improve core cooling effect by making the operation region for a plurality of water injection pumps more broader. Constitution: An emergency reactor core cooling device actuated upon failure of recycling pipe ways is adapted to be fed with cooling water through a thermal sleeve by way of a plurality of water injection pump from pool water in a condensate storage tank and a pressure suppression chamber as water feed source. Exhaust pipes and suction pipes of each of the pumps are connected by way of switching valves and the valves are switched so that the pumps are set to a series operation if the pressure in the pressure vessel is high and the pumps are set to a parallel operation if the pressure in the pressure vessel is low. (Furukawa, Y.)

  6. Birefringent hollow core fibers

    DEFF Research Database (Denmark)

    Roberts, John

    2007-01-01

    Hollow core photonic crystal fiber (HC-PCF), fabricated according to a nominally non-birefringent design, shows a degree of un-controlled birefringence or polarization mode dispersion far in excess of conventional non polarization maintaining fibers. This can degrade the output pulse in many...... applications, and places emphasis on the development of polarization maintaining (PM) HC-PCF. The polarization cross-coupling characteristics of PM HC-PCF are very different from those of conventional PM fibers. The former fibers have the advantage of suffering far less from stress-field fluctuations...... and an increased overlap between the polarization modes at the glass interfaces. The interplay between these effects leads to a wavelength for optimum polarization maintenance, lambda(PM), which is detuned from the wavelength of highest birefringence. By a suitable fiber design involving antiresonance of the core...

  7. Plasma core reactor applications

    International Nuclear Information System (INIS)

    Latham, T.S.; Rodgers, R.J.

    1976-01-01

    Analytical and experimental investigations are being conducted to demonstrate the feasibility of fissioning uranium plasma core reactors and to characterize space and terrestrial applications for such reactors. Uranium hexafluoride (UF 6 ) fuel is injected into core cavities and confined away from the surface by argon buffer gas injected tangentially from the peripheral walls. Power, in the form of thermal radiation emitted from the high-temperature nuclear fuel, is transmitted through fused-silica transparent walls to working fluids which flow in axial channels embedded in segments of the cavity walls. Radiant heat transfer calculations were performed for a six-cavity reactor configuration; each cavity is approximately 1 m in diameter by 4.35 m in length. Axial working fluid channels are located along a fraction of each cavity peripheral wall

  8. Reactor core cooling device

    International Nuclear Information System (INIS)

    Kobayashi, Masahiro.

    1986-01-01

    Purpose: To safely and effectively cool down the reactor core after it has been shut down but is still hot due to after-heat. Constitution: Since the coolant extraction nozzle is situated at a location higher than the coolant injection nozzle, the coolant sprayed from the nozzle, is free from sucking immediately from the extraction nozzle and is therefore used effectively to cool the reactor core. As all the portions from the top to the bottom of the reactor are cooled simultaneously, the efficiency of the reactor cooling process is increased. Since the coolant extraction nozzle can be installed at a point considerably higher than the coolant injection nozzle, the distance from the coolant surface to the point of the coolant extraction nozzle can be made large, preventing cavitation near the coolant extraction nozzle. Therefore, without increasing the capacity of the heat exchanger, the reactor can be cooled down after a shutdown safely and efficiently. (Kawakami, Y.)

  9. Some core contested concepts.

    Science.gov (United States)

    Chomsky, Noam

    2015-02-01

    Core concepts of language are highly contested. In some cases this is legitimate: real empirical and conceptual issues arise. In other cases, it seems that controversies are based on misunderstanding. A number of crucial cases are reviewed, and an approach to language is outlined that appears to have strong conceptual and empirical motivation, and to lead to conclusions about a number of significant issues that differ from some conventional beliefs.

  10. Schumpeter's core works revisited

    DEFF Research Database (Denmark)

    Andersen, Esben Sloth

    2012-01-01

    This paper organises Schumpeter’s core books in three groups: the programmatic duology,the evolutionaryeconomic duology,and the socioeconomic synthesis. By analysing these groups and their interconnections from the viewpoint of modern evolutionaryeconomics,the paper summarises resolved problems a...... and points at remaining challenges. Its analyses are based on distinctions between microevolution and macroevolution, between economic evolution and socioeconomic coevolution, and between Schumpeter’s three major evolutionary models (called Mark I, Mark II and Mark III)....

  11. BWR type reactor core

    International Nuclear Information System (INIS)

    Tatemichi, Shin-ichiro.

    1981-01-01

    Purpose: To eliminate the variation in the power distribution of a BWR type reactor core in the axial direction even if the flow rate is increased or decreased by providing a difference in the void coefficient between the upper part and the lower parts of the reactor core, and increasing the void coefficient at the lower part of the reactor core. Constitution: The void coefficient of the lower region from the center to the lower part along the axial direction of a nuclear fuel assembly is increased to decrease the dependence on the flow rate of the axial power distribution of the nuclear fuel assembly. That is, a water/fuel ratio is varied, the water in non-boiled region is increased or the neutron spectrum is varied so as to vary the void coefficient. In order to exemplify it, the rate of the internal pellets of the fuel rod of the nuclear fuel assembly or the shape of the channel box is varied. Accordingly, the power does not considerably vary even if the flow rate is altered since the power is varied in the power operation. (Yoshihara, H.)

  12. Emergency core cooling system

    International Nuclear Information System (INIS)

    Ando, Masaki.

    1987-01-01

    Purpose: To actuate an automatic pressure down system (ADS) and a low pressure emergency core cooling system (ECCS) upon water level reduction of a nuclear reactor other than loss of coolant accidents (LOCA). Constitution: ADS in a BWR type reactor is disposed for reducing the pressure in a reactor container thereby enabling coolant injection from a low pressure ECCS upon LOCA. That is, ADS has been actuated by AND signal for a reactor water level low signal and a dry well pressure high signal. In the present invention, ADS can be actuated further also by AND signal of the reactor water level low signal, the high pressure ECCS and not-operation signal of reactor isolation cooling system. In such an emergency core cooling system thus constituted, ADS operates in the same manner as usual upon LOCA and, further, ADS is operated also upon loss of feedwater accident in the reactor pressure vessel in the case where there is a necessity for actuating the low pressure ECCS, although other high pressure ECCS and reactor isolation cooling system are not operated. Accordingly, it is possible to improve the reliability upon reactor core accident and mitigate the operator burden. (Horiuchi, T.)

  13. Heatup of the TMI-2 lower head during core relocation

    International Nuclear Information System (INIS)

    Wang, S.K.; Sienicki, J.J.; Spencer, B.W.

    1989-01-01

    An analysis has been carried out to assess the potential of a melting attack upon the reactor vessel lower head and incore instrument nozzle penetration weldments during the TMI core relocation event at 224 minutes. Calculations were performed to determine the potential for molten corium to undergo breakup into droplets which freeze and form a debris bed versus impinging upon the lower head as one or more coherent streams. The effects of thermal-hydraulic interactions between corium streams and water inside the lower plenum, the effects of the core support assembly structure upon the corium, and the consequences of corium relocation by way of the core former region were examined. 19 refs., 24 figs

  14. Coupled full core neutron transport/CFD simulations of pressurized water reactors

    International Nuclear Information System (INIS)

    Kochunas, B.; Stimpson, S.; Collins, B.; Downar, T.; Brewster, R.; Baglietto, E.; Yan, J.

    2012-01-01

    Recently as part of the CASL project, a capability to perform 3D whole-core coupled neutron transport and computational fluid dynamics (CFD) calculations was demonstrated. This work uses the 2D/1D transport code DeCART and the commercial CFD code STAR-CCM+. It builds on previous CASL work demonstrating coupling for smaller spatial domains. The coupling methodology is described along with the problem simulated and results are presented for fresh hot full power conditions. An additional comparison is made to an equivalent model that uses lower order T/H feedback to assess the importance and cost of high fidelity feedback to the neutronics problem. A simulation of a quarter core Combustion Engineering (CE) PWR core was performed with the coupled codes using a Fixed Point Gauss-Seidel iteration technique. The total approximate calculation requirements are nearly 10,000 CPU hours and 1 TB of memory. The problem took 6 coupled iterations to converge. The CFD coupled model and low order T/H feedback model compared well for global solution parameters, with a difference in the critical boron concentration and average outlet temperature of 14 ppm B and 0.94 deg. C, respectively. Differences in the power distribution were more significant with maximum relative differences in the core-wide pin peaking factor (Fq) of 5.37% and average relative differences in flat flux region power of 11.54%. Future work will focus on analyzing problems more relevant to CASL using models with less approximations. (authors)

  15. Molten salt reactors: reactor cores

    International Nuclear Information System (INIS)

    1983-01-01

    In this critical analysis of the MSBR I project are examined the problems concerning the reactor core. Advantages of breeding depend essentially upon solutions to technological problems like continuous reprocessing or graphite behavior under neutron irradiation. Graphite deformation, moderator unloading, control rods and core instrumentation require more studies. Neutronics of the core, influence of core geometry and salt composition, fuel evolution, and thermohydraulics are reviewed [fr

  16. WNP-2 core model upgrade

    International Nuclear Information System (INIS)

    Golightly, C.E.; Ravindranath, T.K.; Belblidia, L.A.; O'Farrell, D.; Andersen, P.S.

    2006-01-01

    The paper describes the core model upgrade of the WNP-2 training simulator and the reasons for the upgrade. The core model as well as the interface with the rest of the simulator are briefly described . The paper also describes the procedure that will be used by WNP-2 to update the simulator core data after future core reloads. Results from the fully integrated simulator are presented. (author)

  17. On-line core monitoring with CORE MASTER / PRESTO

    International Nuclear Information System (INIS)

    Lindahl, S.O.; Borresen, S.; Ovrum, S.

    1986-01-01

    Advanced calculational tools are instrumental in improving reactor plant capacity factors and fuel utilization. The computer code package CORE MASTER is an integrated system designed to achieve this objective. The system covers all main activities in the area of in-core fuel management for boiling water reactors; design, operation support, and on-line core monitoring. CORE MASTER operates on a common data base, which defines the reactor and documents the operating history of the core and of all fuel bundles ever used

  18. Hollow-Core Fiber Lamp

    Science.gov (United States)

    Yi, Lin (Inventor); Tjoelker, Robert L. (Inventor); Burt, Eric A. (Inventor); Huang, Shouhua (Inventor)

    2016-01-01

    Hollow-core capillary discharge lamps on the millimeter or sub-millimeter scale are provided. The hollow-core capillary discharge lamps achieve an increased light intensity ratio between 194 millimeters (useful) and 254 millimeters (useless) light than conventional lamps. The capillary discharge lamps may include a cone to increase light output. Hollow-core photonic crystal fiber (HCPCF) may also be used.

  19. Dual-core Itanium Processor

    CERN Multimedia

    2006-01-01

    Intel’s first dual-core Itanium processor, code-named "Montecito" is a major release of Intel's Itanium 2 Processor Family, which implements the Intel Itanium architecture on a dual-core processor with two cores per die (integrated circuit). Itanium 2 is much more powerful than its predecessor. It has lower power consumption and thermal dissipation.

  20. Maximum stellar iron core mass

    Indian Academy of Sciences (India)

    60, No. 3. — journal of. March 2003 physics pp. 415–422. Maximum stellar iron core mass. F W GIACOBBE. Chicago Research Center/American Air Liquide ... iron core compression due to the weight of non-ferrous matter overlying the iron cores within large .... thermal equilibrium velocities will tend to be non-relativistic.

  1. Core TuLiP

    NARCIS (Netherlands)

    Czenko, M.R.; Etalle, Sandro

    2007-01-01

    We propose CoreTuLiP - the core of a trust management language based on Logic Programming. CoreTuLiP is based on a subset of moded logic programming, but enjoys the features of TM languages such as RT; in particular clauses are issued by different authorities and stored in a distributed manner. We

  2. Automated Core Design

    International Nuclear Information System (INIS)

    Kobayashi, Yoko; Aiyoshi, Eitaro

    2005-01-01

    Multistate searching methods are a subfield of distributed artificial intelligence that aims to provide both principles for construction of complex systems involving multiple states and mechanisms for coordination of independent agents' actions. This paper proposes a multistate searching algorithm with reinforcement learning for the automatic core design of a boiling water reactor. The characteristics of this algorithm are that the coupling structure and the coupling operation suitable for the assigned problem are assumed and an optimal solution is obtained by mutual interference in multistate transitions using multiagents. Calculations in an actual plant confirmed that the proposed algorithm increased the convergence ability of the optimization process

  3. Nuclear reactor core assembly

    International Nuclear Information System (INIS)

    Baxi, C.B.

    1978-01-01

    The object of the present invention is to provide a fast reactor core assembly design for use with a fluid coolant such as liquid sodium or carbon monoxide incorporating a method of increasing the percentage of coolant flow though the blanket elements relative to the total coolant flow through the blanket and fuel elements during shutdown conditions without using moving parts. It is claimed that deterioration due to reactor radiation or temperature conditions is avoided and ready modification or replacement is possible. (U.K.)

  4. Reload core safety verification

    International Nuclear Information System (INIS)

    Svetlik, M.; Minarcin, M.

    2003-01-01

    This paper presents a brief look at the process of reload core safety evaluation and verification in Slovak Republic. It gives an overview of experimental verification of selected nuclear parameters in the course of physics testing during reactor start-up. The comparison of IAEA recommendations and testing procedures at Slovak and European nuclear power plants of similar design is included. An introduction of two level criteria for evaluation of tests represents an effort to formulate the relation between safety evaluation and measured values (Authors)

  5. RB reactor benchmark cores

    International Nuclear Information System (INIS)

    Pesic, M.

    1998-01-01

    A selected set of the RB reactor benchmark cores is presented in this paper. The first results of validation of the well-known Monte Carlo MCNP TM code and adjoining neutron cross section libraries are given. They confirm the idea for the proposal of the new U-D 2 O criticality benchmark system and support the intention to include this system in the next edition of the recent OECD/NEA Project: International Handbook of Evaluated Criticality Safety Experiment, in near future. (author)

  6. Isotope selection for patients undergoing prostate brachytherapy

    International Nuclear Information System (INIS)

    Cha, Christine M.; Potters, Louis; Ashley, Richard; Freeman, Katherine; Wang Xiaohong; Waldbaum, Robert; Leibel, Steven

    1999-01-01

    Purpose: Ultrasound-guided trans perineal interstitial permanent prostate brachytherapy (TIPPB) is generally performed with either 103 Pd or 125 I. The use of 125 I for low Gleason score tumors and 103 Pd for higher Gleason scores has been suggested based on isotope dose rate and cell doubling time observed in in vitro studies. While many centers follow these isotope selection criteria, other centers have elected to use only a single isotope, regardless of Gleason score. No clinical data have been published comparing these isotopes. This study was undertaken to compare outcomes between 125 I and 103 Pd in a matched pair analysis for patients undergoing prostate brachytherapy. Methods and Materials: Six hundred forty-eight consecutively treated patients with clinically confined prostate cancer underwent TIPPB between June 1992 and February 1997. Five hundred thirty-two patients underwent TIPPB alone, whereas 116 received pelvic external beam irradiation and TIPPB. Ninety-three patients received androgen deprivation therapy prior to TIPPB. The prescribed doses for TIPPB were 160 Gy for 125 I (pre-TG43) and 120 Gy for 103 Pd. Patients treated with combination therapy received 41.4 or 45 Gy (1.8 Gy/fraction) external beam irradiation followed by a 3- to 5-week break and then received either a 120-Gy 125 I or a 90-Gy 103 Pd implant. Until November 1994, all patients underwent an 125 I implant after which the isotope selection was based on either Gleason score (Gleason score 2-5: 125 I; Gleason 5-8: 103 Pd) or isotope availability. A matched pair analysis was performed to assess any difference between isotopes. Two hundred twenty-two patients were matched according to Gleason score, prostate-specific antigen (PSA), and stage. PSA relapse-free survival (PSA-RFS) was calculated based on the American Society for Therapeutic Radiology and Oncology (ASTRO) Consensus Group definition of failure. Kaplan-Meier actuarial survival curves were compared to assess differences in

  7. How cores grow by pebble accretion. I. Direct core growth

    Science.gov (United States)

    Brouwers, M. G.; Vazan, A.; Ormel, C. W.

    2018-03-01

    Context. Planet formation by pebble accretion is an alternative to planetesimal-driven core accretion. In this scenario, planets grow by the accretion of cm- to m-sized pebbles instead of km-sized planetesimals. One of the main differences with planetesimal-driven core accretion is the increased thermal ablation experienced by pebbles. This can provide early enrichment to the planet's envelope, which influences its subsequent evolution and changes the process of core growth. Aims: We aim to predict core masses and envelope compositions of planets that form by pebble accretion and compare mass deposition of pebbles to planetesimals. Specifically, we calculate the core mass where pebbles completely evaporate and are absorbed before reaching the core, which signifies the end of direct core growth. Methods: We model the early growth of a protoplanet by calculating the structure of its envelope, taking into account the fate of impacting pebbles or planetesimals. The region where high-Z material can exist in vapor form is determined by the temperature-dependent vapor pressure. We include enrichment effects by locally modifying the mean molecular weight of the envelope. Results: In the pebble case, three phases of core growth can be identified. In the first phase (Mcore mixes outwards, slowing core growth. In the third phase (Mcore > 0.5M⊕), the high-Z inner region expands outwards, absorbing an increasing fraction of the ablated material as vapor. Rainout ends before the core mass reaches 0.6 M⊕, terminating direct core growth. In the case of icy H2O pebbles, this happens before 0.1 M⊕. Conclusions: Our results indicate that pebble accretion can directly form rocky cores up to only 0.6 M⊕, and is unable to form similarly sized icy cores. Subsequent core growth can proceed indirectly when the planet cools, provided it is able to retain its high-Z material.

  8. TMI-2 core examination plan

    International Nuclear Information System (INIS)

    Owen, D.E.; MacDonald, P.E.; Hobbins, R.R.; Ploggr, S.A.

    1982-01-01

    The Three Mile Island (TMI-2) core examination is divided into four stages: (1) before removing the head; (2) before removing the plenum; (3) during defueling; and (4) offsite examinations. Core examinations recommended during the first three stages are primarily devoted to documenting the post-accident condition of the core. The detailed analysis of core damage structures will be performed during offsite examinations at government and commercial hot cell facilities. The primary objectives of these examinations are to enhance the understanding of the degraded core accident sequence, to develop the technical bases for reactor regulations, and to improve LWR design and operation

  9. Monitoring an electric cable core

    International Nuclear Information System (INIS)

    Bhattacharya, S.; Marris, A.

    1984-01-01

    A method of, and apparatus for, continuously monitoring an advancing core having a continuous covering comprises directing X-ray radiation laterally towards the advancing covered core; continuously forming an X-ray image pattern of the advancing covered core and translating the image pattern into a visible image pattern; continuously transforming the visible pattern into a digital bit pattern; and processing the digital bit pattern using a microprocessor with interfacing electronics to provide an image profile of the advancing covered core and/or to provide analogue and/or digital signals indicative of the overall diameter and eccentricity of the covered core and of the thickness of the covering. (author)

  10. Winning Cores in Parity Games

    DEFF Research Database (Denmark)

    Vester, Steen

    2016-01-01

    We introduce the novel notion of winning cores in parity games and develop a deterministic polynomial-time under-approximation algorithm for solving parity games based on winning core approximation. Underlying this algorithm are a number properties about winning cores which are interesting...... in their own right. In particular, we show that the winning core and the winning region for a player in a parity game are equivalently empty. Moreover, the winning core contains all fatal attractors but is not necessarily a dominion itself. Experimental results are very positive both with respect to quality...

  11. Initial charge reactor core

    International Nuclear Information System (INIS)

    Kiyono, Takeshi

    1984-01-01

    Purpose: To effectivity burn fuels and improve the economical performance in an inital charge reactor core of BWR type reactors or the likes. Constitution: In a reactor core constituted with a plurality of fuel assemblies which are to be partially replaced upon fuel replacement, the density of the fissionable materials and the moderator - fuel ratio of a fuel assembly is set corresponding to the period till that fuel assembly is replaced, in which the density of the nuclear fissionable materials is lowered and the moderator - fuel ratio is increased for the fuel assembly with a shorter period from the fueling to the fuel exchange and, while on the other hand, the density of the fissionable materials is increased and the moderator - fuel ratio is decreased for the fuel assembly with a longer period from the fueling to the replacement. Accordingly, since the moderator - fuel ratio is increased for the fuel assembly to be replaced in a shorter period, the neutrons moderating effect is increased to increase the reactivity. (Horiuchi, T.)

  12. Statistical core design

    International Nuclear Information System (INIS)

    Oelkers, E.; Heller, A.S.; Farnsworth, D.A.; Kearfott, K.J.

    1978-01-01

    The report describes the statistical analysis of DNBR thermal-hydraulic margin of a 3800 MWt, 205-FA core under design overpower conditions. The analysis used LYNX-generated data at predetermined values of the input variables whose uncertainties were to be statistically combined. LYNX data were used to construct an efficient response surface model in the region of interest; the statistical analysis was accomplished through the evaluation of core reliability; utilizing propagation of the uncertainty distributions of the inputs. The response surface model was implemented in both the analytical error propagation and Monte Carlo Techniques. The basic structural units relating to the acceptance criteria are fuel pins. Therefore, the statistical population of pins with minimum DNBR values smaller than specified values is determined. The specified values are designated relative to the most probable and maximum design DNBR values on the power limiting pin used in present design analysis, so that gains over the present design criteria could be assessed for specified probabilistic acceptance criteria. The results are equivalent to gains ranging from 1.2 to 4.8 percent of rated power dependent on the acceptance criterion. The corresponding acceptance criteria range from 95 percent confidence that no pin will be in DNB to 99.9 percent of the pins, which are expected to avoid DNB

  13. Nuclear reactor core

    International Nuclear Information System (INIS)

    Koyama, Jun-ichi; Aoyama, Motoo; Ishibashi, Yoko; Mochida, Takaaki; Haikawa, Katsumasa; Yamanaka, Akihiro.

    1995-01-01

    A reactor core is radially divided into an inner region, an outer region and an outermost region. As a fuel, three kinds of fuels, namely, a high enrichment degree fuel at 3.4%, a middle enrichment degree fuel at 2.3% and a low enrichment degree at 1.1% of a fuel average enrichment degree of fission product are used. Each of the fuels is bisected to upper and lower portions at an axial center thereof. The difference of average enrichment degrees between upper and lower portions is 0.1% for the high enrichment degree fuel, 0.3% for the middle enrichment degree fuel and 0.2% for the low enrichment degree fuel. In addition, the composition of fuels in each of radial regions comprises 100% of the low enrichment degree fuels in the outermost region, 91% of the higher enrichment degree fuels and 9% of the middle enrichment degree fuels in the outer region, and 34% of the high enrichment degree fuels and 30% of the middle enrichment degree fuels in the inner region. With such a constitution, fuel economy can be improved while maintaining the thermal margin in an initially loaded reactor core of a BWR type reactor. (I.N.)

  14. Plasma fibronectin in patients undergoing major surgery

    International Nuclear Information System (INIS)

    Sallam, M.H.M.

    2003-01-01

    Plasma fibronectin in patients undergoing major surgery had been determined before and after operation. The study was done on 15 patients and 15 normal healthy individuals. The study revealed that patients subjected to major operation, their fibronectin level was normal before operation followed by reduction one day post-operation. After one week, fibronectin level raised again nearly to the pre-operations levels. The probable mechanisms of fibronectin in healing processes were discussed. Fibronectin (FN) is a family of structurally and immunologically related high molecular weight glycoproteins that are present in many cell surfaces, in extracellular fluids, in connective tissues and in most membranes. Interaction with certain discrete extracellular substances, such as a glucosaminoglycans (e.g. heparin), fibrin and collagen and with cell surface structure seem to account for many of its biological activities, among which are regulation of adhesion, spreading and locomotion (Mosesson and amrani, 1980). The concentration of Fn in human plasma decreases after extensive destruction such as that occurs in major surgery, burns or other trauma. This decrease has been generally though to be due to increased consumption of soluble plasma Fn in opsonization of particulate and soluble debris from circulation by the reticuloendothelial (RE) system. Fn rapidly appears in injury areas, in experimentally induced blisters, wounded and epithelium tissues (Petersen et al., 1985). Fn accumulates at times of increased vascular permeability and it is produced by cell of blood vessels in response to injury

  15. Helicobacter pylori infection in patients undergoing appendectomy.

    Science.gov (United States)

    Pavlidis, T E; Atmatzidis, K S; Papaziogas, B T; Souparis, A; Koutelidakis, I M; Papaziogas, T B

    2002-01-01

    Helicobacter pylori has been found in the upper gastrointestinal tract; it is incriminated as aetiological factor in various pathological conditions. This prospective study assesses the presence of this microorganism in the appendix flora and the possible role of its infection in the pathogenesis of acute appendicitis. H. pylori was investigated in 46 consecutive patients undergoing emergent appendectomy for presumed acute appendicitis. Blood sample for serological test of H. pylori infection was drawn before operation. The removed appendix specimen was stained for H. pylori; confirmation was made by PCR (Polymerase Chain Reaction) analysis. The intensity of inflammation was determined pathologically grading from no inflammation to gangrenous appendicitis. Statistical analysis was made using the chi-square test. Seropositivity for H. pylori infection was found in 18 patients (39%), but the microbe was detected in just two appendix specimens (4%). In all seropositive patients acute appendicitis was confirmed by the pathology study; serous (33%) and purulent or gangrenous (67%). The latter incidence in the seronegative patients was 50%. There were found eight specimens (17%) negative for inflammation dealing all with seronegative patients. It seems that H. pylori colonizes the appendix in small proportion and is unlikely to be associated in direct correlation with acute appendicitis. However, seropositive patients with acute inflammation are likely to suffer from purulent or gangrenous form.

  16. Constipation Risk in Patients Undergoing Abdominal Surgery

    Science.gov (United States)

    Celik, Sevim; Atar, Nurdan Yalcin; Ozturk, Nilgun; Mendes, Guler; Kuytak, Figen; Bakar, Esra; Dalgiran, Duygu; Ergin, Sumeyra

    2015-01-01

    Background: Problems regarding bowel elimination are quite common in patients undergoing abdominal surgery. Objectives: To determine constipation risk before the surgery, bowel elimination during postoperative period, and the factors affecting bowel elimination. Patients and Methods: This is a cross-sectional study. It was conducted in a general surgery ward of a university hospital in Zonguldak, Turkey between January 2013 and May 2013. A total of 107 patients were included in the study, who were selected by convenience sampling. Constipation Risk Assessment Scale (CRAS), patient information form, medical and nursing records were used in the study. Results: The mean age of the patients was found to be 55.97 ± 15.74 (year). Most of the patients have undergone colon (37.4%) and stomach surgeries (21.5%). Open surgical intervention (83.2%) was performed on almost all patients (96.3%) under general anesthesia. Patients were at moderate risk for constipation with average scores of 11.71 before the surgery. A total of 77 patients (72%) did not have bowel elimination problem during postoperative period. The type of the surgery (P < 0.05), starting time for oral feeding after the surgery (P < 0.05), and mobilization (P < 0.05) were effective on postoperative bowel elimination. Conclusions: There is a risk for constipation after abdominal surgery. Postoperative practices are effective on the risk of constipation. PMID:26380107

  17. Models of the earth's core

    Science.gov (United States)

    Stevenson, D. J.

    1981-01-01

    Combined inferences from seismology, high-pressure experiment and theory, geomagnetism, fluid dynamics, and current views of terrestrial planetary evolution lead to models of the earth's core with five basic properties. These are that core formation was contemporaneous with earth accretion; the core is not in chemical equilibrium with the mantle; the outer core is a fluid iron alloy containing significant quantities of lighter elements and is probably almost adiabatic and compositionally uniform; the more iron-rich inner solid core is a consequence of partial freezing of the outer core, and the energy release from this process sustains the earth's magnetic field; and the thermodynamic properties of the core are well constrained by the application of liquid-state theory to seismic and labroatory data.

  18. Efficacy of Prewarming With a Self-Warming Blanket for the Prevention of Unintended Perioperative Hypothermia in Patients Undergoing Hip or Knee Arthroplasty

    DEFF Research Database (Denmark)

    Rosenkilde, Charlotte; Vamosi, Marianne; Lauridsen, Jorgen T.

    2017-01-01

    PURPOSE: Unintended perioperative hypothermia (UPH) is a common and serious complication for patients undergoing anesthesia. The purpose of this study was to identify the incidence of UPH and evaluate the efficacy of a self-warming blanket on the drop in core temperature and risk of UPH in patients...

  19. Observations of Isotope Fractionation in Prestellar Cores: Interstellar Origin of Meteoritic Hot Spot?

    Science.gov (United States)

    Milam, S. N.; Charnley, S. B.

    2011-01-01

    Isotopically fractionated material is found in many solar system objects, including meteorites and comets. It is thought, in some cases, to trace interstellar material that was incorporated into the solar system without undergoing significant processing. Here, we show the results of models and observations of the nitrogen and carbon fractionation in proto-stellar cores.

  20. Exchange of core chromosomes and horizontal transfer of lineage-specific chromosomes in Fusarium oxysporum

    NARCIS (Netherlands)

    Vlaardingerbroek, I.; Beerens, B.; Rose, L.; Fokkens, L.; Cornelissen, B.J.C.; Rep, M.

    2016-01-01

    Horizontal transfer of supernumerary or lineage-specific (LS) chromosomes has been described in a number of plant pathogenic filamentous fungi. So far it was not known whether transfer is restricted to chromosomes of certain size or properties, or whether 'core' chromosomes can also undergo

  1. Waves in the core and mechanical core-mantle interactions

    DEFF Research Database (Denmark)

    Jault, D.; Finlay, Chris

    2015-01-01

    This Chapter focuses on time-dependent uid motions in the core interior, which can beconstrained by observations of the Earth's magnetic eld, on timescales which are shortcompared to the magnetic diusion time. This dynamics is strongly inuenced by the Earth's rapid rotation, which rigidies...... the motions in the direction parallel to the Earth'srotation axis. This property accounts for the signicance of the core-mantle topography.In addition, the stiening of the uid in the direction parallel to the rotation axis gives riseto a magnetic diusion layer attached to the core-mantle boundary, which would...... otherwisebe dispersed by Alfven waves. This Chapter complements the descriptions of large-scaleow in the core (8.04), of turbulence in the core (8.06) and of core-mantle interactions(8.12), which can all be found in this volume. We rely on basic magnetohydrodynamictheory, including the derivation...

  2. Core cooling systems

    International Nuclear Information System (INIS)

    Hoeppner, G.

    1980-01-01

    The reactor cooling system transports the heat liberated in the reactor core to the component - heat exchanger, steam generator or turbine - where the energy is removed. This basic task can be performed with a variety of coolants circulating in appropriately designed cooling systems. The choice of any one system is governed by principles of economics and natural policies, the design is determined by the laws of nuclear physics, thermal-hydraulics and by the requirement of reliability and public safety. PWR- and BWR- reactors today generate the bulk of nuclear energy. Their primary cooling systems are discussed under the following aspects: 1. General design, nuclear physics constraints, energy transfer, hydraulics, thermodynamics. 2. Design and performance under conditions of steady state and mild transients; control systems. 3. Design and performance under conditions of severe transients and loss of coolant accidents; safety systems. (orig./RW)

  3. The true 'core' splitting

    International Nuclear Information System (INIS)

    Hallerbach, J.

    1978-01-01

    Massive unemployment and the fear of a barred future put at present the unions and civil initiative to the apparent alternatives; securing work places or securing life and future. How the 'atomic fight' is fought and its result can have considerable consequences for our society. This volume presents a dialogue: Firstly the situation and environment must be understood giving rise to the controversial arguments. Reports, analyses and interviews are presented on this as basic structure for the future discussion. The quality and direction of the technical progress are dealt with in the core of the discussion. Is atomic technology acceptable. Who should decide and whom does it serve. What is progress going to look like anyway. (orig.) [de

  4. Emergency core cooling systems

    International Nuclear Information System (INIS)

    Kubokoya, Takashi; Okataku, Yasukuni.

    1984-01-01

    Purpose: To maintain the fuel soundness upon loss of primary coolant accidents in a pressure tube type nuclear reactor by injecting cooling heavy water at an early stage, to suppress the temperature of fuel cans at a lower level. Constitution: When a thermometer detects the temperature rise and a pressure gauge detects that the pressure for the primary coolants is reduced slightly from that in the normal operation upon loss of coolant accidents in the vicinity of the primary coolant circuit, heavy water is caused to flow in the heavy water feed pipeway by a controller. This enables to inject the heavy water into the reactor core in a short time upon loss of the primary coolant accidents to suppress the temperature rise in the fuel can thereby maintain the fuel soundness. (Moriyama, K.)

  5. The core and cosmopolitans

    DEFF Research Database (Denmark)

    Dahlander, Linus; Frederiksen, Lars

    2012-01-01

    Users often interact and help each other solve problems in communities, but few scholars have explored how these relationships provide opportunities to innovate. We analyze the extent to which people positioned within the core of a community as well as people that are cosmopolitans positioned...... across multiple external communities affect innovation. Using a multimethod approach, including a survey, a complete database of interactions in an online community, content coding of interactions and contributions, and 36 interviews, we specify the types of positions that have the strongest effect...... on innovation. Our study shows that dispositional explanations for user innovation should be complemented by a relational view that emphasizes how these communities differ from other organizations, the types of behaviors this enables, and the effects on innovation....

  6. Adult educators' core competences

    DEFF Research Database (Denmark)

    Wahlgren, Bjarne

    2016-01-01

    ” requirements, organising them into four thematic subcategories: (1) communicating subject knowledge; (2) taking students’ prior learning into account; (3) supporting a learning environment; and (4) the adult educator’s reflection on his or her own performance. At the end of his analysis of different competence......Abstract Which competences do professional adult educators need? This research note discusses the topic from a comparative perspective, finding that adult educators’ required competences are wide-ranging, heterogeneous and complex. They are subject to context in terms of national and cultural...... environment as well as the kind of adult education concerned (e.g. basic education, work-related education etc.). However, it seems that it is possible to identify certain competence requirements which transcend national, cultural and functional boundaries. This research note summarises these common or “core...

  7. CORE annual report 2006

    International Nuclear Information System (INIS)

    Gut, A.

    2007-04-01

    This annual report for the Swiss Federal Office of Energy (SFOE) summarises the activities of the Swiss Federal Commission on Energy Research CORE in 2006. The six main areas of work during the period 2004 - 2007 are examined, including a review of the SFOE's energy research programme, a road-map for the way towards the realisation of a 2000-watt society, the formulation of an energy research concept for 2008 - 2011, international co-operation, the dissemination of information and the assessment of existing and new instruments. International activities and Switzerland's involvement in energy research within the framework of the International Energy Agency IEA are discussed. New and existing projects are listed and the work done at the Competence Centre for Energy and Mobility noted. The Swiss Technology Award 2007 is presented. Information supplied to interested bodies to help improve knowledge on research work being done and to help make discussions on future energy supply more objective is discussed

  8. Nuclear reactor core

    Energy Technology Data Exchange (ETDEWEB)

    Prescott, R F

    1974-07-11

    The core of the fast neutron reactor consisting, among other components, of fuel elements enriched in plutonium is divided into modules. Each module contains a bundle of four or six elongated components (fuel elements and control rods). In the arrangement with four components, one is kept rigid while the other three are elastically yielding inclined towards the center and lean against the rigid component. In the modules with six pieces, each component is elastically yielding inclined towards a central cavity. In this way, they form a circular arc. A control rod may be placed in the cavity. In order to counteract a relative lateral movement, the outer surfaces of the components which have hexagonal cross-sections have interlocking bearing cushions. The bearing cushions consist of keyway-type ribs or grooves with the wedges or ribs gripping in the grooves of the neighbouring components. In addition, the ribs have oblique entering surfaces.

  9. IRIS core criticality calculations

    International Nuclear Information System (INIS)

    Jecmenica, R.; Trontl, K.; Pevec, D.; Grgic, D.

    2003-01-01

    Three-dimensional Monte Carlo computer code KENO-VI of CSAS26 sequence of SCALE-4.4 code system was applied for pin-by-pin calculations of the effective multiplication factor for the first cycle IRIS reactor core. The effective multiplication factors obtained by the above mentioned Monte Carlo calculations using 27-group ENDF/B-IV library and 238-group ENDF/B-V library have been compared with the effective multiplication factors achieved by HELIOS/NESTLE, CASMO/SIMULATE, and modified CORD-2 nodal calculations. The results of Monte Carlo calculations are found to be in good agreement with the results obtained by the nodal codes. The discrepancies in effective multiplication factor are typically within 1%. (author)

  10. Understanding core conductor fabrics

    International Nuclear Information System (INIS)

    Swenson, D E

    2011-01-01

    ESD Association standard test method ANSI/ESD STM2.1 - Garments (STM2.1), provides electrical resistance test procedures that are applicable for materials and garments that have surface conductive or surface dissipative properties. As has been reported in other papers over the past several years 1 fabrics are now used in many industries for electrostatic control purposes that do not have surface conductive properties and therefore cannot be evaluated using the procedures in STM2.1 2 . A study was conducted to compare surface conductive fabrics with samples of core conductor fibre based fabrics in order to determine differences and similarities with regards to various electrostatic properties. This work will be used to establish a new work item proposal within WG-2, Garments, in the ESD Association Standards Committee in the USA.

  11. Um mundo de cores

    Directory of Open Access Journals (Sweden)

    Elis Artz

    2016-08-01

    Full Text Available A pintura de Elis Artz é feita com muita alma e transborda alegria. A vitalidade de seu trabalho transparece nas cores fortes e nos traços simples e harmoniosos. Confira o trabalho da artista nesta edição da Revista Jangada. ELIS by ELIS Descobri meu talento artístisco e criativo há uns 25 anos. Nasci no Brasil e me mudei para os EUA 10 anos atrás por puro amor. Embora seja psicóloga de formação, o meu apreço pela pintura só cresceu e, com o passar dos anos, a paixão pelas tintas me direcionou a fazer cursos com artistas brasileiros renomados. Já morando nos EUA e com essa grande paixão adormecida, durante anos, decidi me entregar para as cores que sempre me trouxeram alegria e cor para os meus dias. Embora muitas de minhas pinturas tenham ido para minha família e amigos no Brasil, vendi inúmeras outras pelo país através de exposições em galerias de arte. Em 2014, fui uma das artistas em destaque no MTD ART nos Estados Unidos. Minha obra estava dentro de cada ônibus das cidades de Champaign e Urbana e exposta em destaque na Estação de Trem. Em maio de 2015, tive o prazer de ter outro trabalho meu nos outdoors da cidade, destacando a minha tela 'Frida' o ano inteiro e de expor em conjunto com alguns artistas locais no final de outubro. Desde então, tenho pintado cada vez mais e me interessado em divulgar o meu trabalho. E, como diria um amigo meu "Elis, você me mostrou que a vida não é só preto no branco". Ele estava certo.

  12. Growth outside the core.

    Science.gov (United States)

    Zook, Chris; Allen, James

    2003-12-01

    Growth in an adjacent market is tougher than it looks; three-quarters of the time, the effort fails. But companies can change those odds dramatically. Results from a five-year study of corporate growth conducted by Bain & Company reveal that adjacency expansion succeeds only when built around strong core businesses that have the potential to become market leaders. And the best place to look for adjacency opportunities is inside a company's strongest customers. The study also found that the most successful companies were able to consistently, profitably outgrow their rivals by developing a formula for pushing out the boundaries of their core businesses in predictable, repeatable ways. Companies use their repeatability formulas to expand into any number of adjacencies. Some companies make repeated geographic moves, as Vodafone has done in expanding from one geographic market to another over the past 13 years, building revenues from $1 billion in 1990 to $48 billion in 2003. Others apply a superior business model to new segments. Dell, for example, has repeatedly adapted its direct-to-customer model to new customer segments and new product categories. In other cases, companies develop hybrid approaches. Nike executed a series of different types of adjacency moves: it expanded into adjacent customer segments, introduced new products, developed new distribution channels, and then moved into adjacent geographic markets. The successful repeaters in the study had two common characteristics. First, they were extraordinarily disciplined, applying rigorous screens before they made an adjacency move. This discipline paid off in the form of learning curve benefits, increased speed, and lower complexity. And second, in almost all cases, they developed their repeatable formulas by studying their customers and their customers' economics very, very carefully.

  13. Adapting immunisation schedules for children undergoing chemotherapy.

    Science.gov (United States)

    Fernández-Prada, María; Rodríguez-Martínez, María; García-García, Rebeca; García-Corte, María Dolores; Martínez-Ortega, Carmen

    2018-02-01

    Children undergoing chemotherapy for cancer have special vaccination needs after completion of the treatment. The aim of this study was to evaluate the adaptation of post-chemotherapy vaccination schedules. An observational study was performed on a retrospective cohort that included all children aged from 0 to 14 years, who completed chemotherapy in a tertiary hospital between 2009 and 2015. Inclusion and exclusion criteria were applied. Immunisation was administered in accordance with the guidelines of the Vaccine Advisory Committee of the Spanish Association of Paediatrics. Primary Care immunisation and clinical records of the Preventive Medicine and Public Health Department were reviewed. Of the 99 children who had received chemotherapy, 51 (70.6% males) were included in the study. As regards the type of tumour, 54.9% had a solid organ tumour, and 45.1% had a haematological tumour. Post-chemotherapy immunisation was administered to 70.6%. The most common vaccines received were: diphtheria-tetanus-pertussis or diphtheria-tetanus (54.9%), meningococcus C (41.2%), and seasonal influenza (39.2%). The rate of adaptation of the immunisation schedule after chemotherapy was 9.8%. The pneumococcal conjugate vaccine against 7v or 13v was administered to 21.6% of study subjects. However, only 17.6% received polysaccharide 23v. None received vaccination against hepatitis A. No statistically significant differences were observed between adherence to immunisation schedules and type of tumour (P=.066), gender (P=.304), or age (P=.342). Post-chemotherapy immunisation of children with cancer is poor. The participation of health professionals in training programs and referral of paediatric cancer patients to Vaccine Units could improve the rate of schedule adaptation and proper immunisation of this population. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  14. Preoperative information needs of children undergoing tonsillectomy.

    LENUS (Irish Health Repository)

    Buckley, Aoife

    2012-02-01

    AIMS AND OBJECTIVES: To identify the information needs of children undergoing tonsillectomy with reference to content of information, method of delivery, information providers and timing of information provision. BACKGROUND: Tonsillectomy can be anxiety provoking for children and preoperative preparation programmes are long recognised to reduce anxiety. However, few have been designed from the perspectives of children and to date little is known about how best to prepare children in terms of what to tell them, how to convey information to them, who can best provide information and what is the best timing for information provision. DESIGN: A qualitative descriptive study. METHOD: Data were collected from nine children (aged 6-9) using interviews supported by a write and draw technique. Data were coded and categorised into themes reflecting content, method, providers and timing of information. RESULTS: Children openly communicated their information needs especially on what to tell them to expect when facing a tonsillectomy. Their principal concerns were about operation procedures, experiencing \\'soreness\\' and discomfort postoperatively and parental presence. Mothers were viewed as best situated to provide them with information. Children were uncertain about what method of information and timing would be most helpful to them. CONCLUSION: Preoperative educational interventions need to take account of children\\'s information needs so that they are prepared for surgery in ways that are meaningful and relevant to them. Future research is needed in this area. RELEVANCE TO CLINICAL PRACTICE: Practical steps towards informing children about having a tonsillectomy include asking them what they need to know and addressing their queries accordingly. Child-centred information leaflets using a question and answer format could also be helpful to children.

  15. Core catcher for nuclear reactor core meltdown containment

    International Nuclear Information System (INIS)

    Driscoll, M.J.; Bowman, F.L.

    1978-01-01

    A bed of graphite particles is placed beneath a nuclear reactor core outside the pressure vessel but within the containment building to catch the core debris in the event of failure of the emergency core cooling system. Spray cooling of the debris and graphite particles together with draining and flooding of coolant fluid of the graphite bed is provided to prevent debris slump-through to the bottom of the bed

  16. AGR core safety assessment methodologies

    International Nuclear Information System (INIS)

    McLachlan, N.; Reed, J.; Metcalfe, M.P.

    1996-01-01

    To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

  17. Overview of core disruptive accidents

    International Nuclear Information System (INIS)

    Marchaterre, J.F.

    1977-01-01

    An overview of the analysis of core-disruptive accidents is given. These analyses are for the purpose of understanding and predicting fast reactor behavior in severe low probability accident conditions, to establish the consequences of such conditions and to provide a basis for evaluating consequence limiting design features. The methods are used to analyze core-disruptive accidents from initiating event to complete core disruption, the effects of the accident on reactor structures and the resulting radiological consequences are described

  18. Coupling between core and cladding modes in a helical core fiber with large core offset

    International Nuclear Information System (INIS)

    Napiorkowski, Maciej; Urbanczyk, Waclaw

    2016-01-01

    We analyzed the effect of resonant coupling between core and cladding modes in a helical core fiber with large core offset using the fully vectorial method based on the transformation optics formalism. Our study revealed that the resonant couplings to lower order cladding modes predicted by perturbative methods and observed experimentally in fibers with small core offsets are in fact prohibited for larger core offsets. This effect is related to the lack of phase matching caused by elongation of the optical path of the fundamental modes in the helical core. Moreover, strong couplings to the cladding modes of the azimuthal modal number much higher than predicted by perturbative methods may be observed for large core offsets, as the core offset introduces higher order angular harmonics in the field distribution of the fundamental modes. Finally, in contrast to previous studies, we demonstrate the existence of spectrally broad polarization sensitive couplings to the cladding modes suggesting that helical core fibers with large core offsets may be used as broadband circular polarizers. (paper)

  19. Models of the earth's core

    International Nuclear Information System (INIS)

    Stevenson, D.J.

    1981-01-01

    The combination of seismology, high pressure experiment and theory, geomagnetism, fluid dynamics, and current views of terrestrial planetary evolution lead to strong constraints on core models. The synthesis presented here is devoted to the defense of the following properties: (1) core formation was contemporaneous with earth accretion; (2) the outer, liquid core is predominately iron but cannot be purely iron; (3) the inner core-outer core boundary represents a thermodynamic equilibrium between a liquid alloys and a predominanately iron solid; (4) thermodynamic and transport properties of outer core can be estimated from liquid-state theories; and (5) the outer core is probably adiabatic and uniform in composition. None of these propositions are universally accepted by geophysicists. But, the intent of this paper is to present a coherent picture which explains most of the data with the fewest ad hoc assumptions. Areas in which future progress is both essential and likely are geo- and cosmochronology, seismological determinations of core structure, fluid dynamics of the core and mantle, and condensed matter physics

  20. Wire core reactor for NTP

    International Nuclear Information System (INIS)

    Harty, R.B.

    1991-01-01

    The development of the wire core system for Nuclear Thermal Propulsion (NTP) that took place from 1963 to 1965 is discussed. A wire core consists of a fuel wire with spacer wires. It's an annular flow core having a central control rod. There are actually four of these, with beryllium solid reflectors on both ends and all the way around. Much of the information on the concept is given in viewgraph form. Viewgraphs are presented on design details of the wire core, the engine design, engine weight vs. thrust, a technique used to fabricate the wire fuel element, and axial temperature distribution

  1. Nuclear reactor with several cores

    International Nuclear Information System (INIS)

    Swars, H.

    1977-01-01

    Several sodium-cooled cores in separate vessels with removable closures are placed in a common reactor tank. Each individual vessel is protected against the consequences of an accident in the relevant core. Maintenance devices and inlet and outlet pipes for the coolant are also arranged within the reactor tank. The individual vessels are all enclosed by coolant in a way that in case of emergency cooling or refuelling each core can be continued to be cooled by means of the coolant loops of the other cores. (HP) [de

  2. Biochemistry Instrumentation Core Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — The UCLA-DOE Biochemistry Instrumentation Core Facility provides the UCLA biochemistry community with easy access to sophisticated instrumentation for a wide variety...

  3. Core barrel inner tube lifter

    Energy Technology Data Exchange (ETDEWEB)

    Jeffers, J P

    1968-07-16

    A core drill with means for selectively lifting a core barrel inner tube consists of a lifting means connected to the core barrel inner tube assembly. It has a closable passage to permit drilling fluid normally to pass through it. The lifting means has a normally downward facing surface and a means to direct drilling fluid pressure against that surface so that on closure of the passage to fluid flow, the pressure of the drilling fluid is caused to act selectively on it. This causes the lifting means to rise and lift the core barrel. (7 claims)

  4. TMI-2 core debris analysis

    International Nuclear Information System (INIS)

    Cook, B.A.; Carlson, E.R.

    1985-01-01

    One of the ongoing examination tasks for the damaged TMI-2 reactor is analysis of samples of debris obtained from the debris bed presently at the top of the core. This paper summarizes the results reported in the TMI-2 Core Debris Grab Sample Examination and Analysis Report, which will be available early in 1986. The sampling and analysis procedures are presented, and information is provided on the key results as they relate to the present core condition, peak temperatures during the transient, temperature history, chemical interactions, and core relocation. The results are then summarized

  5. Meltdown reactor core cooling facility

    International Nuclear Information System (INIS)

    Matsuoka, Tsuyoshi.

    1992-01-01

    The meltdown reactor core cooling facility comprises a meltdown reactor core cooling tank, a cooling water storage tank situates at a position higher than the meltdown reactor core cooling tank, an upper pipeline connecting the upper portions of the both of the tanks and a lower pipeline connecting the lower portions of them. Upon occurrence of reactor core meltdown, a high temperature meltdown reactor core is dropped on the cooling tank to partially melt the tank and form a hole, from which cooling water is flown out. Since the water source of the cooling water is the cooling water storage tank, a great amount of cooling water is further dropped and supplied and the reactor core is submerged and cooled by natural convection for a long period of time. Further, when the lump of the meltdown reactor core is small and the perforated hole of the meltdown reactor cooling tank is small, cooling water is boiled by the high temperature lump intruding into the meltdown reactor core cooling tank and blown out from the upper pipeline to the cooling water storage tank to supply cooling water from the lower pipeline to the meltdown reactor core cooling tank. Since it is constituted only with simple static facilities, the facility can be simplified to attain improvement of reliability. (N.H.)

  6. Fort St. Vrain core performance

    International Nuclear Information System (INIS)

    McEachern, D.W.; Brown, J.R.; Heller, R.A.; Franek, W.J.

    1977-07-01

    The Fort St. Vrain High Temperature Gas Cooled Reactor core performance has been evaluated during the startup testing phase of the reactor operation. The reactor is graphite moderated, helium cooled, and uses coated particle fuel and on-line flow control to each of the 37 refueling regions. Principal objectives of startup testing were to determine: core and control system reactivity, radial power distribution, flow control capability, and initial fission product release. Information from the core demonstrates that Technical Specifications are being met, performance of the core and fuel is as expected, flow and reactivity control are predictable and simple for the operator to carry out

  7. Characterizing the Core via K-Core Covers

    NARCIS (Netherlands)

    Sanchez, S.M.; Borm, P.E.M.; Estevez, A.

    2013-01-01

    This paper extends the notion of individual minimal rights for a transferable utility game (TU-game) to coalitional minimal rights using minimal balanced families of a specific type, thus defining a corresponding minimal rights game. It is shown that the core of a TU-game coincides with the core of

  8. INTESTINAL MALROTATION IN PATIENTS UNDERGOING BARIATRIC SURGERY.

    Science.gov (United States)

    Vidal, Eduardo Arevalo; Rendon, Francisco Abarca; Zambrano, Trino Andrade; García, Yudoco Andrade; Viteri, Mario Ferrin; Campos, Josemberg Marins; Ramos, Manoela Galvão; Ramos, Almino Cardoso

    Intestinal malrotation is a rare congenital anomaly. In adults is very difficult to recognize due to the lack of symptoms. Diagnosis is usually incidental during surgical procedures or at autopsy. To review the occurrence and recognition of uneventful intestinal malrotation discovered during regular cases of bariatric surgeries. Were retrospectively reviewed the medical registry of 20,000 cases undergoing bariatric surgery, from January 2002 to January 2016, looking for the occurrence of intestinal malrotation and consequences in the intraoperative technique and immediate evolution of the patients. Five cases (0,025%) of intestinal malrotation were found. All of them were males, aging 45, 49, 37,52 and 39 years; BMI 35, 42, 49, 47 and 52 kg/m2, all of them with a past medical history of morbid obesity. The patient with BMI 35 kg/m2 suffered from type 2 diabetes also. All procedures were completed by laparoscopic approach, with no conversions. In one patient was not possible to move the jejunum to the upper abdomen in order to establish the gastrojejunostomy and a sleeve gastrectomy was performed. In another patient was not possible to fully recognize the anatomy due to bowel adhesions and a single anastomosis gastric bypass was preferred. No leaks or bleeding were identified. There were no perioperative complications. All patients were discharged 72 h after the procedure and no immediate 30-day complications were reported. Patients with malrotation can successfully undergo laparoscopic bariatric surgery. May be necessary changes in the surgical original strategy regarding the malrotation. Surgeons must check full abdominal anatomical condition prior to start the division of the stomach. Má-rotação intestinal é rara anomalia congênita em adultos de difícil reconhecimento devido à falta de sintomas. O diagnóstico é feito geralmente incidentalmente durante procedimentos cirúrgicos ou durante autópsia. Verificar a ocorrência e reconhecimento não eventual

  9. Adult educators' core competences

    Science.gov (United States)

    Wahlgren, Bjarne

    2016-06-01

    Which competences do professional adult educators need? This research note discusses the topic from a comparative perspective, finding that adult educators' required competences are wide-ranging, heterogeneous and complex. They are subject to context in terms of national and cultural environment as well as the kind of adult education concerned (e.g. basic education, work-related education etc.). However, it seems that it is possible to identify certain competence requirements which transcend national, cultural and functional boundaries. This research note summarises these common or "core" requirements, organising them into four thematic subcategories: (1) communicating subject knowledge; (2) taking students' prior learning into account; (3) supporting a learning environment; and (4) the adult educator's reflection on his or her own performance. At the end of his analysis of different competence profiles, the author notes that adult educators' ability to train adult learners in a way which then enables them to apply and use what they have learned in practice (thus performing knowledge transfer) still seems to be overlooked.

  10. Emergency core cooling system

    International Nuclear Information System (INIS)

    Arai, Kenji; Oikawa, Hirohide.

    1990-01-01

    The device according to this invention can ensure cooling water required for emerency core cooling upon emergence such as abnormally, for example, loss of coolant accident, without using dynamic equipments such as a centrifugal pump or large-scaled tank. The device comprises a pressure accumulation tank containing a high pressure nitrogen gas and cooling water inside, a condensate storage tank, a pressure suppression pool and a jet stream pump. In this device there are disposed a pipeline for guiding cooling water in the pressure accumulation tank as a jetting water to a jetting stream pump, a pipeline for guiding cooling water stored in the condensate storage tank and the pressure suppression pool as pumped water to the jetting pump and, further, a pipeline for guiding the discharged water from the jet stream pump which is a mixed stream of pumped water and jetting water into the reactor pressure vessel. In this constitution, a sufficient amount of water ranging from relatively high pressure to low pressure can be supplied into the reactor pressure vessel, without increasing the size of the pressure accumulation tank. (I.S.)

  11. Emergency core cooling system

    International Nuclear Information System (INIS)

    Sato, Akira; Kobayashi, Masahide.

    1983-01-01

    Purpose: To enable a stable operation of an emergency core cooling system by preventing the system from the automatic stopping at an abnormally high level of the reactor water during its operation. Constitution: A pump flow rate signal and a reactor water level signal are used and, when the reactor water level is increased to a predetermined level, the pump flow rate is controlled by the reactor water level signal instead of the flow rate signal. Specifically, when the reactor water level is gradually increased by the water injection from the pump and exceeds a setting signal for the water level, the water level deviation signal acts as a demand signal for the decrease in the flow rate of the pump and the output signal from the water level controller is also decreased depending on the control constant. At a certain point, the output signal from the water level controller becomes smaller than the output signal from the flow rate controller. Thus, the output signal from the water level controller is outputted as the output signal for the lower level preference device. In this way, the reactor water level and the pump flow rate can be controlled within a range not exceeding the predetermined pump flow rate. (Horiuchi, T.)

  12. Emergency core cooling system

    International Nuclear Information System (INIS)

    Abe, Nobuaki.

    1993-01-01

    A reactor comprises a static emergency reactor core cooling system having an automatic depressurization system and a gravitationally dropping type water injection system and a container cooling system by an isolation condenser. A depressurization pipeline of the automatic depressurization system connected to a reactor pressure vessel branches in the midway. The branched depressurizing pipelines are extended into an upper dry well and a lower dry well, in which depressurization valves are disposed at the top end portions of the pipelines respectively. If loss-of-coolant accidents should occur, the depressurization valve of the automatic depressurization system is actuated by lowering of water level in the pressure vessel. This causes nitrogen gases in the upper and the lower dry wells to transfer together with discharged steams effectively to a suppression pool passing through a bent tube. Accordingly, the gravitationally dropping type water injection system can be actuated faster. Further, subsequent cooling for the reactor vessel can be ensured sufficiently by the isolation condenser. (I.N.)

  13. Necrosome core machinery: MLKL.

    Science.gov (United States)

    Zhang, Jing; Yang, Yu; He, Wenyan; Sun, Liming

    2016-06-01

    In the study of regulated cell death, the rapidly expanding field of regulated necrosis, in particular necroptosis, has been drawing much attention. The signaling of necroptosis represents a sophisticated form of a death pathway. Anti-caspase mechanisms (e.g., using inhibitors of caspases, or genetic ablation of caspase-8) switch cell fate from apoptosis to necroptosis. The initial extracellular death signals regulate RIP1 and RIP3 kinase activation. The RIP3-associated death complex assembly is necessary and sufficient to initiate necroptosis. MLKL was initially identified as an essential mediator of RIP1/RIP3 kinase-initiated necroptosis. Recent studies on the signal transduction using chemical tools and biomarkers support the idea that MLKL is able to make more functional sense for the core machinery of the necroptosis death complex, called the necrosome, to connect to the necroptosis execution. The experimental data available now have pointed that the activated MLKL forms membrane-disrupting pores causing membrane leakage, which extends the prototypical concept of morphological and biochemical events following necroptosis happening in vivo. The key role of MLKL in necroptosis signaling thus sheds light on the logic underlying this unique "membrane-explosive" cell death pathway. In this review, we provide the general concepts and strategies that underlie signal transduction of this form of cell death, and then focus specifically on the role of MLKL in necroptosis.

  14. Core-to-core uniformity improvement in multi-core fiber Bragg gratings

    Science.gov (United States)

    Lindley, Emma; Min, Seong-Sik; Leon-Saval, Sergio; Cvetojevic, Nick; Jovanovic, Nemanja; Bland-Hawthorn, Joss; Lawrence, Jon; Gris-Sanchez, Itandehui; Birks, Tim; Haynes, Roger; Haynes, Dionne

    2014-07-01

    Multi-core fiber Bragg gratings (MCFBGs) will be a valuable tool not only in communications but also various astronomical, sensing and industry applications. In this paper we address some of the technical challenges of fabricating effective multi-core gratings by simulating improvements to the writing method. These methods allow a system designed for inscribing single-core fibers to cope with MCFBG fabrication with only minor, passive changes to the writing process. Using a capillary tube that was polished on one side, the field entering the fiber was flattened which improved the coverage and uniformity of all cores.

  15. Nuclear reactor core stabilizing arrangement

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1976-01-01

    A nuclear reactor core stabilizing arrangement is described wherein a plurality of actuators, disposed in a pattern laterally surrounding a group of elongated fuel assemblies, press against respective contiguous fuel assemblies on the periphery of the group to reduce the clearance between adjacent fuel assemblies thereby forming a more compacted, vibration resistant core structure. 7 claims, 4 drawing figures

  16. Complicated Politics to the Core

    Science.gov (United States)

    McGuinn, Patrick

    2015-01-01

    People dislike the Common Core for several different reasons, and so it is important to disaggregate the sources of opposition and to assess and then to dispel some of the myths that have built up around it. It also is important to understand the unusual political alliances that have emerged in opposition to Common Core implementation and how they…

  17. Toward full MOX core design

    International Nuclear Information System (INIS)

    Rouviere, G.; Guillet, J.L.; Bruna, G.B.; Pelet, J.

    1999-01-01

    This paper presents a selection of the main preliminary results of a study program sponsored by COGEMA and currently carried out by FRAMATOME. The objective of this study is to investigate the feasibility of full MOX core loading in a French 1300 MWe PWR, a recent and widespread standard nuclear power plant. The investigation includes core nuclear design, thermal hydraulic and systems aspects. (authors)

  18. Collapsing stellar cores and supernovae

    Energy Technology Data Exchange (ETDEWEB)

    Epstein, R J [Nordisk Inst. for Teoretisk Atomfysik, Copenhagen (Denmark); Noorgaard, H [Nordisk Inst. for Teoretisk Atomfysik, Copenhagen (Denmark); Chicago Univ., IL (USA). Enrico Fermi Inst.); Bond, J R [Niels Bohr Institutet, Copenhagen (Denmark); California Inst. of Tech., Pasadena (USA). W.K. Kellogg Radiation Lab.)

    1979-05-01

    The evolution of a stellar core is studied during its final quasi-hydrostatic contraction. The core structure and the (poorly known) properties of neutron rich matter are parametrized to include most plausible cases. It is found that the density-temperature trajectory of the material in the central part of the core (the core-center) is insensitive to nearly all reasonable parameter variations. The central density at the onset of the dynamic phase of the collapse (when the core-center begins to fall away from the rest of the star) and the fraction of the emitted neutrinos which are trapped in the collapsing core-center depend quite sensitively on the properties of neutron rich matter. We estimate that the amount of energy Ecm which is imparted to the core-mantle by the neutrinos which escape from the imploded core-center can span a large range of values. For plausible choices of nuclear and model parameters Ecm can be large enough to yield a supernova event.

  19. The INTEGRAL Core Observing Programme

    DEFF Research Database (Denmark)

    Winkler, C.; Gehrels, N.; Lund, Niels

    1999-01-01

    The Core Programme of the INTEGRAL mission is defined as the portion of the scientific programme covering the guaranteed time observations for the INTEGRAL Science Working Team. This paper describes the current status of the Core Programme preparations and summarizes the key elements...... of the observing programme....

  20. Core barrel plug

    International Nuclear Information System (INIS)

    Tolino, R.W.; Hopkins, R.J.; Congleton, R.L.; Popalis, C.H.

    1986-01-01

    A plug is described for preventing flow through a port in a core barrel of a pressurized water nuclear reactor which consists of: a substantially cylindrical body formed with a cylindrical portion and a flange and defining a tapered leading open end with the other end being closed by an end plug attached to the flange, the body defining a bore therein extending from the open end to the end plug with the bore having a smaller diameter near the open end than near the end plug, the cylindrical portion having a lip near the open end and being formed with longitudinal slots extending from the open end toward the flange and extending entirely through the thickness of the cylindrical portion, the cylindrical portion having a circumferential first groove on the outer surface thereof located near the forwardmost portion of the cylindrical portion but not in the section of the cylindrical portion that has the slots therein, and a plurality of circumferential second grooves on the outer surface thereof located in the section of the cylindrical portion that has the slots therein, the first and second grooves establishing a seal between the cylindrical portion and the inside surface of the port when the cylindrical portion is expanded, and the flange and the end plug having a passageway defined therein for introducing a fluid into the body; a metal ring disposed in each of the second grooves; a mandrel slidably disposed and captured in the body and capable of being moved toward the open end of the body when the fluid is introduced through the passageway, thereby causing the cylindrical portion to be expanded into contact with the inside surface of the port; and a locking mechanism disposed in the end plug for preventing inadvertent movement of the mandrel

  1. SCORPIO - VVER core surveillance system

    International Nuclear Information System (INIS)

    Zalesky, K.; Svarny, J.; Novak, L.; Rosol, J.; Horanes, A.

    1997-01-01

    The Halden Project has developed the core surveillance system SCORPIO which has two parallel modes of operation: the Core Follow Mode and the Predictive Mode. The main motivation behind the development of SCORPIO is to make a practical tool for reactor operators which can increase the quality and quantity of information presented on core status and dynamic behavior. This can first of all improve plant safety as undesired core conditions are detected and prevented. Secondly, more flexible and efficient plant operation is made possible. So far the system has only been implemented on western PWRs but the basic concept is applicable to a wide range of reactor including WWERs. The main differences between WWERs and typical western PWRs with respect to core surveillance requirements are outlined. The development of a WWER version of SCORPIO was initiated in cooperation with the Nuclear Research Institute at Rez and industry partners in the Czech Republic. The first system will be installed at the Dukovany NPP. (author)

  2. Core body temperature in obesity.

    Science.gov (United States)

    Heikens, Marc J; Gorbach, Alexander M; Eden, Henry S; Savastano, David M; Chen, Kong Y; Skarulis, Monica C; Yanovski, Jack A

    2011-05-01

    A lower core body temperature set point has been suggested to be a factor that could potentially predispose humans to develop obesity. We tested the hypothesis that obese individuals have lower core temperatures than those in normal-weight individuals. In study 1, nonobese [body mass index (BMI; in kg/m(2)) temperature-sensing capsules, and we measured core temperatures continuously for 24 h. In study 2, normal-weight (BMI of 18-25) and obese subjects swallowed temperature-sensing capsules to measure core temperatures continuously for ≥48 h and kept activity logs. We constructed daily, 24-h core temperature profiles for analysis. Mean (±SE) daily core body temperature did not differ significantly between the 35 nonobese and 46 obese subjects (36.92 ± 0.03°C compared with 36.89 ± 0.03°C; P = 0.44). Core temperature 24-h profiles did not differ significantly between 11 normal-weight and 19 obese subjects (P = 0.274). Women had a mean core body temperature ≈0.23°C greater than that of men (36.99 ± 0.03°C compared with 36.76 ± 0.03°C; P body temperature. It may be necessary to study individuals with function-altering mutations in core temperature-regulating genes to determine whether differences in the core body temperature set point affect the regulation of human body weight. These trials were registered at clinicaltrials.gov as NCT00428987 and NCT00266500.

  3. Epistemology and ontology in core ontologies: FOLaw and LRI-Core, two core ontologies for law

    NARCIS (Netherlands)

    Breukers, J.A.P.J.; Hoekstra, R.J.

    2004-01-01

    For more than a decade constructing ontologies for legal domains, we, at the Leibniz Center for Law, felt really the need to develop a core ontology for law that would enable us to re-use the common denominator of the various legal domains. In this paper we present two core ontologies for law. The

  4. HOW STARLESS ARE STARLESS CORES?

    International Nuclear Information System (INIS)

    Schnee, Scott; Friesen, Rachel; Di Francesco, James; Johnstone, Doug; Enoch, Melissa; Sadavoy, Sarah

    2012-01-01

    In this paper, we present the results of Combined Array for Research in Millimeter-wave Astronomy continuum and spectral line observations of the dense core Per-Bolo 45. Although this core has previously been classified as starless, we find evidence for an outflow and conclude that Per-Bolo 45 is actually an embedded, low-luminosity protostar. We discuss the impact of newly discovered, low-luminosity, embedded objects in the Perseus molecular cloud on starless core and protostar lifetimes. We estimate that the starless core lifetime has been overestimated by 4%-18% and the Class 0/I protostellar lifetime has been underestimated by 5%-20%. Given the relatively large systematic uncertainties involved in these calculations, variations on the order of 10% do not significantly change either core lifetimes or the expected protostellar luminosity function. Finally, we suggest that high-resolution (sub)millimeter surveys of known cores lacking near-infrared and mid-infrared emission are necessary to make an accurate census of starless cores.

  5. Challenges for proteomics core facilities.

    Science.gov (United States)

    Lilley, Kathryn S; Deery, Michael J; Gatto, Laurent

    2011-03-01

    Many analytical techniques have been executed by core facilities established within academic, pharmaceutical and other industrial institutions. The centralization of such facilities ensures a level of expertise and hardware which often cannot be supported by individual laboratories. The establishment of a core facility thus makes the technology available for multiple researchers in the same institution. Often, the services within the core facility are also opened out to researchers from other institutions, frequently with a fee being levied for the service provided. In the 1990s, with the onset of the age of genomics, there was an abundance of DNA analysis facilities, many of which have since disappeared from institutions and are now available through commercial sources. Ten years on, as proteomics was beginning to be utilized by many researchers, this technology found itself an ideal candidate for being placed within a core facility. We discuss what in our view are the daily challenges of proteomics core facilities. We also examine the potential unmet needs of the proteomics core facility that may also be applicable to proteomics laboratories which do not function as core facilities. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Development of core sampling technique for ITER Type B radwaste

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. G.; Hong, K. P.; Oh, W. H.; Park, M. C.; Jung, S. H.; Ahn, S. B. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Type B radwaste (intermediate level and long lived radioactive waste) imported from ITER vacuum vessel are to be treated and stored in basement of hot cell building. The Type B radwaste treatment process is composed of buffer storage, cutting, sampling/tritium measurement, tritium removal, characterization, pre-packaging, inspection/decontamination, and storage etc. The cut slices of Type B radwaste components generated from cutting process undergo sampling process before and after tritium removal process. The purpose of sampling is to obtain small pieces of samples in order to investigate the tritium content and concentration of Type B radwaste. Core sampling, which is the candidates of sampling technique to be applied to ITER hot cell, is available for not thick (less than 50 mm) metal without use of coolant. Experimented materials were SS316L and CuCrZr in order to simulate ITER Type B radwaste. In core sampling, substantial secondary wastes from cutting chips will be produced unavoidably. Thus, core sampling machine will have to be equipped with disposal system such as suction equipment. Core sampling is considered an unfavorable method for tool wear compared to conventional drilling.

  7. Core principles of evolutionary medicine

    Science.gov (United States)

    Grunspan, Daniel Z; Nesse, Randolph M; Barnes, M Elizabeth; Brownell, Sara E

    2018-01-01

    Abstract Background and objectives Evolutionary medicine is a rapidly growing field that uses the principles of evolutionary biology to better understand, prevent and treat disease, and that uses studies of disease to advance basic knowledge in evolutionary biology. Over-arching principles of evolutionary medicine have been described in publications, but our study is the first to systematically elicit core principles from a diverse panel of experts in evolutionary medicine. These principles should be useful to advance recent recommendations made by The Association of American Medical Colleges and the Howard Hughes Medical Institute to make evolutionary thinking a core competency for pre-medical education. Methodology The Delphi method was used to elicit and validate a list of core principles for evolutionary medicine. The study included four surveys administered in sequence to 56 expert panelists. The initial open-ended survey created a list of possible core principles; the three subsequent surveys winnowed the list and assessed the accuracy and importance of each principle. Results Fourteen core principles elicited at least 80% of the panelists to agree or strongly agree that they were important core principles for evolutionary medicine. These principles over-lapped with concepts discussed in other articles discussing key concepts in evolutionary medicine. Conclusions and implications This set of core principles will be helpful for researchers and instructors in evolutionary medicine. We recommend that evolutionary medicine instructors use the list of core principles to construct learning goals. Evolutionary medicine is a young field, so this list of core principles will likely change as the field develops further. PMID:29493660

  8. Coagulation profile in patients undergoing video-assisted thoracoscopic lobectomy

    DEFF Research Database (Denmark)

    Christensen, Thomas Decker; Vad, Henrik; Pedersen, Søren

    2017-01-01

    -, and the first two days postoperatively by standard coagulation blood test, thromboelastometry (ROTEM®) and thrombin generation. Results: Patients undergoing potential curative surgery for lung cancer were not hypercoagulable preoperatively. There was no statistically significant difference in the majority......Background: Knowledge about the impact of Low-Molecular-Weight Heparin (LMWH) on the coagulation system in patients undergoing minimal invasive lung cancer surgery is sparse. The aim of this study was to assess the effect of LMWH on the coagulation system in patients undergoing Video......-Assisted Thoracoscopic Surgery (VATS) lobectomy for primary lung cancer. Methods: Sixty-three patients diagnosed with primary lung cancer undergoing VATS lobectomy were randomized to either subcutaneous injection with dalteparin (Fragmin®) 5000 IE once daily or no intervention. Coagulation was assessed pre-, peri...

  9. Experiense with remineraling means in patients undergoing orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Stepanova Ye.A.

    2011-03-01

    Full Text Available In patients undergoing orthodontic treatment using bracket-technology a high risk of caries development. The algorithm of preventive interventions for the prevention of hair demineralization of enamel of the teeth

  10. Preoperative B-type natriuretic peptides in patients undergoing ...

    African Journals Online (AJOL)

    Southern African Journal of Anaesthesia and Analgesia ... Preoperative B-type natriuretic peptides in patients undergoing noncardiac surgery: a cumulative ... Future investigation should focus on the clinical implications of these data and the ...

  11. Do patients fear undergoing general anesthesia for oral surgery?

    Science.gov (United States)

    Elmore, Jasmine R; Priest, James H; Laskin, Daniel M

    2014-01-01

    Many patients undergoing major surgery have more fear of the general anesthesia than the procedure. This appears to be reversed with oral surgery. Therefore, patients need to be as well informed about this aspect as the surgical operation.

  12. Preoperative autologous plateletpheresis in patients undergoing open heart surgery.

    OpenAIRE

    Tomar Akhlesh; Tempe Deepak; Banerjee A; Hegde R; Cooper A; Khanna S

    2003-01-01

    Blood conservation is an important aspect of care provided to the patients undergoing cardiac operations with cardiopulmonary bypass (CPB). It is even more important in patients with anticipated prolonged CPB, redo cardiac surgery, patients having negative blood group and in patients undergoing emergency cardiac surgery. In prolonged CPB the blood is subjected to more destruction of important coagulation factors, in redo surgery the separation of adhesions leads to increased bleeding and diff...

  13. Assessing Core Competencies

    Science.gov (United States)

    Narayanan, M.

    2004-12-01

    Catherine Palomba and Trudy Banta offer the following definition of assessment, adapted from one provided by Marches in 1987. Assessment in the systematic collection, review, and use of information about educational programs undertaken for the purpose of improving student learning and development. (Palomba and Banta 1999). It is widely recognized that sophisticated computing technologies are becoming a key element in today's classroom instructional techniques. Regardless, the Professor must be held responsible for creating an instructional environment in which the technology actually supplements learning outcomes of the students. Almost all academic disciplines have found a niche for computer-based instruction in their respective professional domain. In many cases, it is viewed as an essential and integral part of the educational process. Educational institutions are committing substantial resources to the establishment of dedicated technology-based laboratories, so that they will be able to accommodate and fulfill students' desire to master certain of these specific skills. This type of technology-based instruction may raise some fundamental questions about the core competencies of the student learner. Some of the most important questions are : 1. Is the utilization of these fast high-powered computers and user-friendly software programs creating a totally non-challenging instructional environment for the student learner ? 2. Can technology itself all too easily overshadow the learning outcomes intended ? 3. Are the educational institutions simply training students how to use technology rather than educating them in the appropriate field ? 4. Are we still teaching content-driven courses and analysis oriented subject matter ? 5. Are these sophisticated modern era technologies contributing to a decline in the Critical Thinking Capabilities of the 21st century technology-savvy students ? The author tries to focus on technology as a tool and not on the technology

  14. Synthesis and Plasmonic Understanding of Core/Satellite and Core Shell Nanostructures

    Science.gov (United States)

    Ruan, Qifeng

    Au nanospheres with molecular linkers. The plasmon resonances of the core/satellite nanostructures undergo red shifts in comparison to those of the sole Au cores, which is consistent with Mie theory analysis. As predicted by finite-difference time-domain simulations, the assembled core/satellite nanostructures exhibit large enhancements for Raman scattering. The facile growth of Au nanospheres and assembly of core/satellite nanostructures blaze a new way to the design of nanoarchitectures with desired plasmonic properties and functions. Coating semiconductors onto Au nanocrystals to form core shell configurations can increase the interactions between the two materials, benefiting from their large active interfacial area. The shell can also protect the Au nanocrystal core from aggregation, reshaping, and chemical corrosion. In this thesis, (Au nanocrystal core) (titania shell) nanostructures with tunable shell thicknesses were prepared by a facile wetchemistry method. Au nanocrystals with strong and tunable plasmon resonances in the visible and near-infrared regions can enhance and broaden the light utilization of TiO2 through the scattering/absorption enhancement, sensitization, and hot-electron injection. The integration of Au nanocrystals therefore hold the prospect of breaking the light-harvesting limit of TiO2 arising from its wide band gap. The resultant (Au core) (TiO2 shell) nanostructures were examined to be capable of efficiently generating reactive oxygen species under near-infrared resonant excitation. On the other hand, the transverse plasmon modes of Au nanorods, which are often too weak to be observed on scattering spectra, are enhanced by the TiO2 shell through energy transfer. With the increment of the shell thickness, the intensity of the transverse plasmon mode increases significantly and even becomes comparable with the longitudinal plasmon mode. Interestingly, both the transverse and longitudinal modes of the (Au core) (TiO2 shell) nanostructures

  15. SpaceCube Core Software

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a flexible, modular and user friendly SpaceCube Core Software system that will dramatically simplify SpaceCube application development and enable any...

  16. Viral Evolution Core | FNLCR Staging

    Science.gov (United States)

    Brandon F. Keele, Ph.D. PI/Senior Principal Investigator, Retroviral Evolution Section Head, Viral Evolution Core Leidos Biomedical Research, Inc. Frederick National Laboratory for Cancer Research Frederick, MD 21702-1201 Tel: 301-846-173

  17. Computed tomography of drill cores

    International Nuclear Information System (INIS)

    Taylor, T.

    1985-08-01

    A preliminary computed tomography evaluation of drill cores of granite and sandstone has generated geologically significant data. Density variations as small as 4 percent and fractures as narrow as 0.1 mm were easily detected

  18. In-core monitoring detectors

    International Nuclear Information System (INIS)

    Mitelman, M.G.

    2001-01-01

    The main task of in-core monitoring consists in securing observability of the reactor installation in all possible operation modes (normal, transient, accident and post-accident). Operation safety at acceptable cost can be achieved by optimized measurement errors. The range of sensors applied as in-core detectors for operative measurements in the industry is very limited in number. Among them might be cited self powered neutron detectors (SPND) and thermocouples. Sensors are incorporated in the in-core detectors assemblies (SVRD). The presentation makes an effort to touch upon the problems of assuring and increasing quality of in-core on-line measurements. So we do not consider systems using movable detectors, as the latter do not assure on-line measurements. (Authors)

  19. Discovering the Army's Core Competencies

    National Research Council Canada - National Science Library

    Rudesheim, Frederick

    2001-01-01

    This paper seeks to answer the question, "Has the Army correctly identified its core competencies to ensure the Army can adequately respond to the national military strategy?" FM 1, The Army (Prototype Draft...

  20. Changes in social function and body image in women diagnosed with breast cancer undergoing chemotherapy

    Directory of Open Access Journals (Sweden)

    Sabrina Nunes Garcia

    2017-05-01

    Full Text Available The objective of this study was to investigate the impairment of social and emotional functions, body image and future perspective in women with breast cancer undergoing chemotherapeutic treatment. This is a longitudinal research conducted from October 2012 to October 2013 at the chemotherapy unit of a private institution of Oncology located in Curitiba, PR, Brazil. Sociodemographic and clinical questionnaires were applied, Quality of Life Questionnaire Core 30 e Quality of Life Questionnaire – Breast Cancer Module, to 48 women subjected for the first time to chemotherapy, in three different stages of the treatment. Analysis with Friedman`s, Spearman and Kruskal-Wallis nonparametric tests was performed. Changes were observed in social function and body image, which compromised quality of life significantly. Results can subsidize the planning of and adjustments to the care provided to these women by considering the perception about the impact of therapy on QL and their perspectives.

  1. Recriticality analyses for CAPRA cores

    International Nuclear Information System (INIS)

    Maschek, W.; Thiem, D.

    1995-01-01

    The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

  2. Recriticality analyses for CAPRA cores

    Energy Technology Data Exchange (ETDEWEB)

    Maschek, W.; Thiem, D.

    1995-08-01

    The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

  3. One dimensional reactor core model

    International Nuclear Information System (INIS)

    Kostadinov, V.; Stritar, A.; Radovo, M.; Mavko, B.

    1984-01-01

    The one dimensional model of neutron dynamic in reactor core was developed. The core was divided in several axial nodes. The one group neutron diffusion equation for each node is solved. Feedback affects of fuel and water temperatures is calculated. The influence of xenon, boron and control rods is included in cross section calculations for each node. The system of equations is solved implicitly. The model is used in basic principle Training Simulator of NPP Krsko. (author)

  4. Improvements to core-catchers

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, T C.W.

    1969-07-22

    A core catcher consists of a generally annular holder adapted to be contained within a core barrel with sets of dogs circumferentially disposed in the holder. Each set of dogs consists of at least 2 dogs of different lengths pivotally mounted in the holder to swing inward. The dogs in each set are vertically superimposed. They are of upward decreasing length, with the arc of swing of the vertically adjacent dogs overlapping. (8 claims)

  5. Nanoporous polymer liquid core waveguides

    DEFF Research Database (Denmark)

    Gopalakrishnan, Nimi; Christiansen, Mads Brøkner; Ndoni, Sokol

    2010-01-01

    We demonstrate liquid core waveguides defined by UV to enable selective water infiltration in nanoporous polymers, creating an effective refractive index shift Δn=0.13. The mode confinement and propagation loss in these waveguides are presented.......We demonstrate liquid core waveguides defined by UV to enable selective water infiltration in nanoporous polymers, creating an effective refractive index shift Δn=0.13. The mode confinement and propagation loss in these waveguides are presented....

  6. LMFBR Ultra Long Life Cores

    International Nuclear Information System (INIS)

    Schmidt, J.E.; Doncals, R.A.; Porter, C.A.; Gundy, L.M.

    1986-01-01

    The Ultra Long Life Core is an attractive and innovative design approach with several extremely beneficial attributes. Long Life cores are applicable to the full range of LMR plant sizes resulting in lifetimes up to 30 years. Core life is somewhat limited for smaller plant sizes, however significant benefits of this approach still exist for all plant sizes. The union of long life cores and the complementary inherent safety technology offer a means of utilizing the well-proven oxide fuel in a system with unsurpassed safety capability. A further benefit is that the uranium fuel cycle can be used in long life cores, especially for initial LMR plant deployment, thereby eliminating the need for reprocessing prior to starting LMR plant construction in the U.S. Finally the long life core significantly reduces power costs. With inherent safety capability designed into an LMR and with the ULLC fuel cycle, power costs competitive with light water plants are achievable while offering improved operational flexibility derived through extending refueling intervals

  7. TMI-2 core boring machine

    International Nuclear Information System (INIS)

    Croft, K.M.; Helbert, H.J.; Laney, W.M.

    1986-01-01

    An important and essential aspect of the TMI-2 defueling effort is to determine what occurred in the core region during the accident. Remote cameras and probes only portray a portion of the overall picture. What lies beneath the rubble bed and solidified sublayer is, as yet, unknown. This paper discusses the TMI-2 Core Boring Machine, which has been developed to drill into the damaged core of the TMI-2 reactor and extract stratified samples of the core. This machine, its unique support structure, positioning and leveling systems, and specially designed drill bits, combine to provide a unique mechanical system. In addition, the machine is controlled by a microprocessor; which actually controls the drilling operation, allowing relatively inexperienced operators to drill the core samples. A data acquisition system is data integral with the controlling system and collects data relative to system conditions and monitored parameters during drilling. Data obtained during the actual drilling operations are collected in a data base which will be used for actual mapping of the core region, identifying materials and stratification levels that are present

  8. Reactor core performance calculating device

    International Nuclear Information System (INIS)

    Tominaga, Kenji; Bando, Masaru; Sano, Hiroki; Maruyama, Hiromi.

    1995-01-01

    The device of the present invention can calculate a power distribution efficiently at high speed by a plurality of calculation means while taking an amount of the reactor state into consideration. Namely, an input device takes data from a measuring device for the amount of the reactor core state such as a large number of neutron detectors disposed in the reactor core for monitoring the reactor state during operation. An input data distribution device comprises a state recognition section and a data distribution section. The state recognition section recognizes the kind and amount of the inputted data and information of the calculation means. The data distribution section analyzes the characteristic of the inputted data, divides them into a several groups, allocates them to each of the calculation means for the purpose of calculating the reactor core performance efficiently at high speed based on the information from the state recognition section. A plurality of the calculation means calculate power distribution of each of regions based on the allocated inputted data, to determine the power distribution of the entire reactor core. As a result, the reactor core can be evaluated at high accuracy and at high speed irrespective of the whole reactor core or partial region. (I.S.)

  9. Core cooling system for reactor

    International Nuclear Information System (INIS)

    Kondo, Ryoichi; Amada, Tatsuo.

    1976-01-01

    Purpose: To improve the function of residual heat dissipation from the reactor core in case of emergency by providing a secondary cooling system flow channel, through which fluid having been subjected to heat exchange with the fluid flowing in a primary cooling system flow channel flows, with a core residual heat removal system in parallel with a main cooling system provided with a steam generator. Constitution: Heat generated in the core during normal reactor operation is transferred from a primary cooling system flow channel to a secondary cooling system flow channel through a main heat exchanger and then transferred through a steam generator to a water-steam system flow channel. In the event if removal of heat from the core by the main cooling system becomes impossible due to such cause as breakage of the duct line of the primary cooling system flow channel or a trouble in a primary cooling system pump, a flow control valve is opened, and steam generator inlet and outlet valves are closed, thus increasing the flow rate in the core residual heat removal system. Thereafter, a blower is started to cause dissipation of the core residual heat from the flow channel of a system for heat dissipation to atmosphere. (Seki, T.)

  10. High Prevalence of Nonalcoholic Fatty Liver Disease in Adolescents Undergoing Bariatric Surgery.

    Science.gov (United States)

    Xanthakos, Stavra A; Jenkins, Todd M; Kleiner, David E; Boyce, Tawny W; Mourya, Reena; Karns, Rebekah; Brandt, Mary L; Harmon, Carroll M; Helmrath, Michael A; Michalsky, Marc P; Courcoulas, Anita P; Zeller, Meg H; Inge, Thomas H

    2015-09-01

    Little is known about the prevalence of nonalcoholic fatty liver disease (NAFLD) among severely obese adolescents or factors that determine its development. We investigated the prevalence of NAFLD in a multicenter cohort of adolescents undergoing bariatric surgery and the factors associated with it. We enrolled 242 adolescents undergoing bariatric surgery between March 2007 and February 2012 at 5 tertiary care centers into a multicenter, prospective observational cohort study. Intraoperative core liver biopsies were collected from 165 subjects; 17 were excluded because of insufficient liver tissue or use of hepatotoxic medications, so 148 remained in the study (mean age, 16.8 ± 1.6 years; median body mass index = 52 kg/m(2)). Liver tissues were analyzed by histology using validated criteria. Hepatic gene expression was analyzed in 67 samples. NAFLD was present in 59% of this predominantly female (72%), white (68%), non-Hispanic (91%) cohort. Of subjects with NAFLD, 24% had borderline and 10% had definite nonalcoholic steatohepatitis (NASH). Mild fibrosis (stage 2 or lower) was observed in 18% of liver biopsies and stage 3 was observed in 0.7%, but cirrhosis was not detected. Dyslipidemia was present in 78% of subjects, hypertension in 44%, and diabetes in 14%. More severe NAFLD was associated with increasing levels of alanine aminotransferase, fasting glucose level, hypertension (each P adolescents undergoing bariatric surgery in this cohort had NAFLD, yet the prevalence of severe or fibrotic NASH was low. Increasing severity of NAFLD was associated with level of alanine aminotransferase and cardiometabolic risk factors, but not body mass index. Based on gene expression analysis, borderline and definite NASH were associated with abnormal immune function, intestinal cholesterol absorption, and lipid metabolism. Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.

  11. The desire to survive: the adaptation process of adult cancer patients undergoing radiotherapy.

    Science.gov (United States)

    Chao, Yu Huan; Wang, Shou-Yu; Hsu, Tsui Hua; Wang, Kai Wei K

    2015-01-01

    Radiotherapy is one of the primary treatment strategies for cancer. However, patients not only deal with the side-effects of radiotherapy, but they must also endure the psychological distress caused by cancer. This study explores how cancer patients adapt to the treatment process when receiving radiotherapy. This study used a grounded theory approach, and eight in-depth interviews were conducted with newly diagnosed cancer patients who received radiotherapy as a primary treatment. The core category that emerged from this study was "the desire to survive". The categories and subcategories that emerged from the data include facing unknown situations (e.g. searching for relevant information and decision-making considerations, and listening to healthcare professionals' suggestions), experiencing the pain of treatment (e.g. tolerating side-effects, tolerating inconvenience during the treatment, accepting support during the treatment, and adjusting lifestyles), and chances to extend life (e.g. accepting fate, determination to undergo the treatment, and adjusting negative emotions). The study results provide a better understanding of the experiences of cancer patients undergoing radiotherapy. Healthcare professionals should provide effective medical management for side-effects and psychological support to cancer patients during the journey of radiotherapy. © 2014 The Authors. Japan Journal of Nursing Science © 2014 Japan Academy of Nursing Science.

  12. Beta-amyloid peptides undergo regulated co-secretion with neuropeptide and catecholamine neurotransmitters.

    Science.gov (United States)

    Toneff, Thomas; Funkelstein, Lydiane; Mosier, Charles; Abagyan, Armen; Ziegler, Michael; Hook, Vivian

    2013-08-01

    Beta-amyloid (Aβ) peptides are secreted from neurons, resulting in extracellular accumulation of Aβ and neurodegeneration of Alzheimer's disease. Because neuronal secretion is fundamental for the release of neurotransmitters, this study assessed the hypothesis that Aβ undergoes co-release with neurotransmitters. Model neuronal-like chromaffin cells were investigated, and results illustrate regulated, co-secretion of Aβ(1-40) and Aβ(1-42) with peptide neurotransmitters (galanin, enkephalin, and NPY) and catecholamine neurotransmitters (dopamine, norepinephrine, and epinephrine). Regulated secretion from chromaffin cells was stimulated by KCl depolarization and nicotine. Forskolin, stimulating cAMP, also induced co-secretion of Aβ peptides with peptide and catecholamine neurotransmitters. These data suggested the co-localization of Aβ with neurotransmitters in dense core secretory vesicles (DCSV) that store and secrete such chemical messengers. Indeed, Aβ was demonstrated to be present in DCSV with neuropeptide and catecholamine transmitters. Furthermore, the DCSV organelle contains APP and its processing proteases, β- and γ-secretases, that are necessary for production of Aβ. Thus, Aβ can be generated in neurotransmitter-containing DCSV. Human IMR32 neuroblastoma cells also displayed regulated secretion of Aβ(1-40) and Aβ(1-42) with the galanin neurotransmitter. These findings illustrate that Aβ peptides are present in neurotransmitter-containing DCSV, and undergo co-secretion with neuropeptide and catecholamine neurotransmitters that regulate brain functions. Copyright © 2013 Elsevier Inc. All rights reserved.

  13. Synthesis and detection the oxidization of Co cores of Co@SiO2 core-shell nanoparticles by in situ XRD and EXAFS.

    Science.gov (United States)

    Zhang, Kunhao; Zhao, Ziyan; Wu, Zhonghua; Zhou, Ying

    2015-01-01

    In this paper, the Co@SiO2 core-shell nanoparticles were prepared by the sol-gel method. The oxidization of Co core nanoparticles was studied by the synchrotron radiation-based techniques including in situ X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS) up to 800°C in air and N2 protection conditions, respectively. It was found that the oxidization of Co cores is undergoing three steps regardless of being in air or in N2 protection condition. In the first step ranging from room temperature to 200°C, the Co cores were dominated by Co(0) state as well as small amount of Co(2+) ions. When temperature was above 300°C, the interface between Co cores and SiO2 shells was gradually oxidized into Co(2+), and the CoO layer was observed. As the temperature increasing to 800°C, the Co cores were oxidized to Co3O4 or Co3O4/CoO. Nevertheless, the oxidization kinetics of Co cores is different for the Co@SiO2 in air and N2 gas conditions. Generally, the O2 in the air could get through the SiO2 shells easily onto the Co core surface and induce the oxidization of the Co cores due to the mesoporous nature of the SiO2 shells. However, in N2 gas condition, the O atoms can only be from the SiO2 shells, so the diffusion effect of O atoms in the interface between Co core and SiO2 shell plays a key role.

  14. The effects of heated and room-temperature abdominal lavage solutions on core body temperature in dogs undergoing celiotomy.

    Science.gov (United States)

    Nawrocki, Michael A; McLaughlin, Ron; Hendrix, P K

    2005-01-01

    To document the magnitude of temperature elevation obtained with heated lavage solutions during abdominal lavage, 18 dogs were lavaged with sterile isotonic saline intraoperatively (i.e., during a celiotomy). In nine dogs, room-temperature saline was used. In the remaining nine dogs, saline heated to 43+/-2 degrees C (110+/-4 degrees F) was used. Esophageal, rectal, and tympanic temperatures were recorded every 60 seconds for 15 minutes after initiation of the lavage. Temperature levels decreased in dogs lavaged with room-temperature saline. Temperature levels increased significantly in dogs lavaged with heated saline after 2 to 6 minutes of lavage, and temperatures continued to increase throughout the 15-minute lavage period.

  15. Assessing Cardiovascular Health Using Life′s Simple 7 in a Chinese Population Undergoing Stroke Prevention

    Directory of Open Access Journals (Sweden)

    Qiong Yang

    2015-01-01

    Conclusions: Few Chinese patients undergoing stroke prevention had optimal CVH (determined using LS7. Additionally, fewer patients undergoing secondary prevention had optimal CVH than those undergoing primary prevention. In particular, physical activity and diet status in this population require improvement.

  16. In situ accretion of gaseous envelopes on to planetary cores embedded in evolving protoplanetary discs

    Science.gov (United States)

    Coleman, Gavin A. L.; Papaloizou, John C. B.; Nelson, Richard P.

    2017-09-01

    The core accretion hypothesis posits that planets with significant gaseous envelopes accreted them from their protoplanetary discs after the formation of rocky/icy cores. Observations indicate that such exoplanets exist at a broad range of orbital radii, but it is not known whether they accreted their envelopes in situ, or originated elsewhere and migrated to their current locations. We consider the evolution of solid cores embedded in evolving viscous discs that undergo gaseous envelope accretion in situ with orbital radii in the range 0.1-10 au. Additionally, we determine the long-term evolution of the planets that had no runaway gas accretion phase after disc dispersal. We find the following. (I) Planets with 5 M⊕ cores never undergo runaway accretion. The most massive envelope contained 2.8 M⊕ with the planet orbiting at 10 au. (II) Accretion is more efficient on to 10 M⊕ and 15 M⊕ cores. For orbital radii ap ≥ 0.5 au, 15 M⊕ cores always experienced runaway gas accretion. For ap ≥ 5 au, all but one of the 10 M⊕ cores experienced runaway gas accretion. No planets experienced runaway growth at ap = 0.1 au. (III) We find that, after disc dispersal, planets with significant gaseous envelopes cool and contract on Gyr time-scales, the contraction time being sensitive to the opacity assumed. Our results indicate that Hot Jupiters with core masses ≲15 M⊕ at ≲0.1 au likely accreted their gaseous envelopes at larger distances and migrated inwards. Consistently with the known exoplanet population, super-Earths and mini-Neptunes at small radii during the disc lifetime, accrete only modest gaseous envelopes.

  17. Reactor core performance estimating device

    International Nuclear Information System (INIS)

    Tanabe, Akira; Yamamoto, Toru; Shinpuku, Kimihiro; Chuzen, Takuji; Nishide, Fusayo.

    1995-01-01

    The present invention can autonomously simplify a neural net model thereby enabling to conveniently estimate various amounts which represents reactor core performances by a simple calculation in a short period of time. Namely, a reactor core performance estimation device comprises a nerve circuit net which divides the reactor core into a large number of spacial regions, and receives various physical amounts for each region as input signals for input nerve cells and outputs estimation values of each amount representing the reactor core performances as output signals of output nerve cells. In this case, the nerve circuit net (1) has a structure of extended multi-layered model having direct coupling from an upper stream layer to each of downstream layers, (2) has a forgetting constant q in a corrected equation for a joined load value ω using an inverse error propagation method, (3) learns various amounts representing reactor core performances determined using the physical models as teacher signals, (4) determines the joined load value ω decreased as '0' when it is to less than a predetermined value upon learning described above, and (5) eliminates elements of the nerve circuit net having all of the joined load value decreased to 0. As a result, the neural net model comprises an autonomously simplifying means. (I.S.)

  18. SCORPIO - WWER core surveillance system

    International Nuclear Information System (INIS)

    Hornaes, Arne; Bodal, Terje; Sunde, Svein; Zalesky, K.; Lehman, M.; Pecka, M.; Svarny, J.; Krysl, V.; Juzova, Z.; Sedlak, A.; Semmler, M.

    1998-01-01

    The Institut for energiteknikk has developed the core surveillance system SCORPIO, which has two parallel modes of operation: the Core Follow Mode and the Predictive Mode. The main motivation behind the development of SCORPIO is to make a practical tool for reactor operators which can increase the quality and quantity of information presented on core status and dynamic behavior. This can first of all improve plant safety, as undesired core conditions are detected and prevented. Secondly, more flexible and efficient plant operation is made possible. The system has been implemented on western PWRs, but the basic concept is applicable to a wide range of reactors including WWERs. The main differences between WWERs and typical western PWRs with respect to core surveillance requirements are outlined. The development of a WWER version of SCORPIO has been done in co-operation with the Nuclear Research Institute Rez, and industry partners in the Czech Republic. The first system is installed at Dukovany NPP, where the Site Acceptance Test was completed 6. March 1998.(Authors)

  19. SCORPIO - VVER core surveillance system

    International Nuclear Information System (INIS)

    Hornaes, A.; Bodal, T.; Sunde, S.

    1998-01-01

    The Institutt for energiteknikk has developed the core surveillance system SCORPIO, which has two parallel modes of operation: the Core Follow Mode and the Predictive Mode. The main motivation behind the development of SCORPIO is to make a practical tool for reactor operators, which can increase the quality and quantity of information presented on core status and dynamic behavior. This can first of all improve plant safety, as undesired core conditions are detected and prevented. Secondly, more flexible and efficient plant operation is made possible. The system has been implemented on western PWRs, but the basic concept is applicable to a wide range of reactors including VVERs. The main differences between VVERs and typical western PWRs with respect to core surveillance requirements are outlined. The development of a VVER version of SCORPIO has been done in co-operation with the Nuclear Research Institute Rez, and industry partners in the Czech Republic. The first system is installed at Dukovany NPP, where the Site Acceptance Test was completed 6. March 1998.(author)

  20. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Yuchi, Yoko; Aoyama, Motoo; Haikawa, Katsumasa; Yamanaka, Akihiro; Koyama, Jun-ichi.

    1996-01-01

    In a fuel assembly of a BWR type reactor, a region substantially containing burnable poison is divided into an upper region and a lower region having different average concentrations of burnable poison along a transverse cross section perpendicular to the axial direction. The ratio of burnable poison contents of both regions is determined to not more than 80%, and the average concentration of the burnable poison in the lower region is determined to not less than 9% by weight. An infinite multiplication factor at an initial stage of the burning of the fuel assembly is controlled effectively by the burnable poisons. Namely, the ratio of the axial power can be controlled by the distribution of the enrichment degree of uranium fuels and the distribution of the burnable poison concentration in the axial direction. Since the average enrichment degree of the reactor core has to be increased in order to provide an initially loaded reactor core at high burnup degree. Distortion of the power distribution in the axial direction of the reactor core to which fuel assemblies at high enrichment degree are loaded is flattened to improve thermal margin, to extend continuous operation period and increase a burnup degree upon take-out thereby improving fuel economy without worsening the reactor core characteristics of the initially loaded reactor core. (N.H.)

  1. Grain alignment in starless cores

    International Nuclear Information System (INIS)

    Jones, T. J.; Bagley, M.; Krejny, M.; Andersson, B.-G.; Bastien, P.

    2015-01-01

    We present near-IR polarimetry data of background stars shining through a selection of starless cores taken in the K band, probing visual extinctions up to A V ∼48. We find that P K /τ K continues to decline with increasing A V with a power law slope of roughly −0.5. Examination of published submillimeter (submm) polarimetry of starless cores suggests that by A V ≳20 the slope for P versus τ becomes ∼−1, indicating no grain alignment at greater optical depths. Combining these two data sets, we find good evidence that, in the absence of a central illuminating source, the dust grains in dense molecular cloud cores with no internal radiation source cease to become aligned with the local magnetic field at optical depths greater than A V ∼20. A simple model relating the alignment efficiency to the optical depth into the cloud reproduces the observations well.

  2. SMART core protection system design

    International Nuclear Information System (INIS)

    Lee, J. K.; Park, H. Y.; Koo, I. S.; Park, H. S.; Kim, J. S.; Son, C. H.

    2003-01-01

    SMART COre Protection System(SCOPS) is designed with real-tims Digital Signal Processor(DSP) board and Network Interface Card(NIC) board. SCOPS has a Control Rod POSition (CRPOS) software module while Core Protection Calculator System(CPCS) consists of Core Protection Calculators(CPCs) and Control Element Assembly(CEA) Calculators(CEACs) in the commercial nuclear plant. It's not necessary to have a independent cabinets for SCOPS because SCOPS is physically very small. Then SCOPS is designed to share the cabinets with Plant Protection System(PPS) of SMART. Therefor it's very easy to maintain the system because CRPOS module is used instead of the computer with operating system

  3. Core-meltdown experimental review

    International Nuclear Information System (INIS)

    1975-08-01

    The results of a study of the experimental evidence having a bearing on hypothetical core meltdowns in light-water reactors are presented. The first objective of the study was to obtain a compendium of the experimental evidence applicable to the analysis of a hypothetical core meltdown. Literature from the nuclear power field and from other scientific disciplines and industrial sources was reviewed. Investigators and other persons knowledgeable in the subject were interviewed. A second objective was to determine what data are required and to determine the adequacy of existing data. In core-meltdown studies only land-based plants have been examined. A third, and final, task of this study was to examine offshore plants to determine applicability of onshore plant analysis to particular areas therein and to determine what information peculiar to meltdown accidents in offshore plants was needed. (U.S.)

  4. Full MOX core for PWRs

    International Nuclear Information System (INIS)

    Puill, A.; Aniel-Buchheit, S.

    1997-01-01

    Plutonium management is a major problem of the back end of the fuel cycle. Fabrication costs must be reduced and plant operation simplified. The design of a full MOX PWR core would enable the number of reactors devoted to plutonium recycling to be reduced and fuel zoning to be eliminated. This paper is a contribution to the feasibility studies for achieving such a core without fundamental modification of the current design. In view of the differences observed between uranium and plutonium characteristics it seems necessary to reconsider the safety of a MOX-fuelled PWR. Reduction of the control worth and modification of the moderator density coefficient are the main consequences of using MOX fuel in a PWR. The core reactivity change during a draining or a cooling is thus of prime interest. The study of core global draining leads to the following conclusion: only plutonium fuels of very poor quality (i.e. with low fissile content) cannot be used in a 900 MWe PWR because of a positive global voiding reactivity effect. During a cooling accident, like an spurious opening of a secondary-side valve, the hypothetical return to criticality of a 100% MOX core controlled by means of 57 control rod clusters (made of hafnium-clad B 4 C rods with a 90% 10 B content) depends on the isotopic plutonium composition. But safety criteria can be complied with for all isotopic compositions provided the 10 B content of the soluble boron is increased to a value of 40%. Core global draining and cooling accidents do not present any major obstacle to the feasibility of a 100% MOX PWR, only minor hardware modifications will be required. (author)

  5. Identifying ELIXIR Core Data Resources.

    Science.gov (United States)

    Durinx, Christine; McEntyre, Jo; Appel, Ron; Apweiler, Rolf; Barlow, Mary; Blomberg, Niklas; Cook, Chuck; Gasteiger, Elisabeth; Kim, Jee-Hyub; Lopez, Rodrigo; Redaschi, Nicole; Stockinger, Heinz; Teixeira, Daniel; Valencia, Alfonso

    2016-01-01

    The core mission of ELIXIR is to build a stable and sustainable infrastructure for biological information across Europe. At the heart of this are the data resources, tools and services that ELIXIR offers to the life-sciences community, providing stable and sustainable access to biological data. ELIXIR aims to ensure that these resources are available long-term and that the life-cycles of these resources are managed such that they support the scientific needs of the life-sciences, including biological research. ELIXIR Core Data Resources are defined as a set of European data resources that are of fundamental importance to the wider life-science community and the long-term preservation of biological data. They are complete collections of generic value to life-science, are considered an authority in their field with respect to one or more characteristics, and show high levels of scientific quality and service. Thus, ELIXIR Core Data Resources are of wide applicability and usage. This paper describes the structures, governance and processes that support the identification and evaluation of ELIXIR Core Data Resources. It identifies key indicators which reflect the essence of the definition of an ELIXIR Core Data Resource and support the promotion of excellence in resource development and operation. It describes the specific indicators in more detail and explains their application within ELIXIR's sustainability strategy and science policy actions, and in capacity building, life-cycle management and technical actions. The identification process is currently being implemented and tested for the first time. The findings and outcome will be evaluated by the ELIXIR Scientific Advisory Board in March 2017. Establishing the portfolio of ELIXIR Core Data Resources and ELIXIR Services is a key priority for ELIXIR and publicly marks the transition towards a cohesive infrastructure.

  6. Reactor core and initially loaded reactor core of nuclear reactor

    International Nuclear Information System (INIS)

    Koyama, Jun-ichi; Aoyama, Motoo.

    1989-01-01

    In BWR type reactors, improvement for the reactor shutdown margin is an important characteristic condition togehter with power distribution flattening . However, in the reactor core at high burnup degree, the reactor shutdown margin is different depending on the radial position of the reactor core. That is , the reactor shutdown margin is smaller in the outer peripheral region than in the central region of the reactor core. In view of the above, the reactor core is divided radially into a central region and as outer region. The amount of fissionable material of first fuel assemblies newly loaded in the outer region is made less than the amount of the fissionable material of second fuel assemblies newly loaded in the central region, to thereby improve the reactor shutdown margin in the outer region. Further, the ratio between the amount of the fissionable material in the upper region and that of the fissionable material in the lower portion of the first fuel assemblies is made smaller than the ratio between the amount of the fissionable material in the upper region and that of the fissionable material in the lower region of the second fuel assemblies, to thereby obtain a sufficient thermal margin in the central region. (K.M.)

  7. Core-to-core dimers forming switchable mesophase

    Czech Academy of Sciences Publication Activity Database

    Horčic, M.; Svoboda, J.; Novotná, Vladimíra; Pociecha, D.; Gorecka, E.

    2017-01-01

    Roč. 53, č. 18 (2017), s. 2721-2724 ISSN 1359-7345 R&D Projects: GA ČR GA15-02843S Institutional support: RVO:68378271 Keywords : liquid crystals * bent- core mesogens * dimers Subject RIV: JJ - Other Materials OBOR OECD: Nano-materials (production and properties) Impact factor: 6.319, year: 2016

  8. Benchmarking and qualification of the ppercase nufreq -ppercase npw code for best estimate prediction of multichannel core stability margins

    International Nuclear Information System (INIS)

    Taleyarkhan, R.P.; McFarlane, A.F.; Lahey, R.T. Jr.; Podowski, M.Z.

    1994-01-01

    The ppercase nufreq - ppercase np (G.C. Park et al. NUREG/CR-3375, 1983; S.J. Peng et al. NUREG/CR-4116, 1984; S.J. Peng et al. Nucl. Sci. Eng. 88 (1988) 404-411) code was modified and set up at Westinghouse, USA, for mixed fuel type multichannel core-wide stability analysis. The resulting code, ppercase nufreq - ppercase npw , allows for variable axial power profiles between channel groups and can handle mixed fuel types.Various models incorporated into ppercase nurfreq - ppercase npw were systematically compared against the Westinghouse channel stability analysis code ppercase mazda -ppercase nf (R. Taleyarkhan et al. J. Heat Transfer 107 (February 1985) 175-181; NUREG/CR2972, 1983), for which the mathematical model was developed in an entirely different manner. Excellent agreement was obtained which verified the thermal-hydraulic modeling and coding aspects. Detailed comparisons were also performed against nuclear-coupled reactor core stability data. All 13 Peach Bottom-2 EOC-2/3 low flow stability tests (L.A. Carmichael and R.O. Neimi, EPRI NP-564, Project 1020-1, 1978; F.B. Woffinden and R.O. Neimi, EPRI, NP 0972, Project 1020-2, 1981) were simulated. A key aspect for code qualification involved the development of a physically based empirical algorithm to correct for the effect of core inlet flow development on subcooled boiling. Various other modeling assumptions were tested and sensitivity studies performed. Good agreement was obtained between ppercase nufreq-npw predictions and data. ((orig.))

  9. CCTF CORE I test results

    International Nuclear Information System (INIS)

    Murao, Yoshio; Sudoh, Takashi; Akimoto, Hajime; Iguchi, Tadashi; Sugimoto, Jun; Fujiki, Kazuo; Hirano, Kenmei

    1982-07-01

    This report presents the results of the following CCTF CORE I tests conducted in FY. 1980. (1) Multi-dimensional effect test, (2) Evaluation model test, (3) FLECHT coupling test. On the first test, one-dimensional treatment of the core thermohydrodynamics was discussed. On the second and third tests, the test results were compared with the results calculated by the evaluation model codes and the results of the corresponding FLECHT-SET test (Run 2714B), respectively. The work was performed under contracts with the Atomic Energy Bureau of Science and Technology Agency of Japan. (author)

  10. Core baffle for nuclear reactors

    International Nuclear Information System (INIS)

    Machado, O.J.; Berringer, R.T.

    1977-01-01

    The invention concerns the design of the core of a LWR with a large number of fuel assemblies formed by fuel rods and kept in position by spacer grids. According to the invention, at the level of the spacer grids match plates are mounted with openings so the flow of coolant directed upwards will not be obstructed and a parallel bypass will be obtained in the space between the core barrel and the baffle plates. In case of an accident, this configuration reduces or avoids damage from overpressure reactions. (HP) [de

  11. Understanding Core-Collapse Supernovae

    Science.gov (United States)

    Hix, W. R.; Lentz, E. J.; Baird, M.; Messer, O. E. B.; Mezzacappa, A.; Lee, C.-T.; Bruenn, S. W.; Blondin, J. M.; Marronetti, P.

    2010-03-01

    Our understanding of core-collapse supernovae continues to improve as better microphysics is included in increasingly realistic neutrino-radiationhydrodynamic simulations. Recent multi-dimensional models with spectral neutrino transport, which slowly develop successful explosions for a range of progenitors between 12 and 25 solar mass, have motivated changes in our understanding of the neutrino reheating mechanism. In a similar fashion, improvements in nuclear physics, most notably explorations of weak interactions on nuclei and the nuclear equation of state, continue to refine our understanding of how supernovae explode. Recent progresses on both the macroscopic and microscopic effects that affect core-collapse supernovae are discussed.

  12. Core seismic methods verification report

    International Nuclear Information System (INIS)

    Olsen, B.E.; Shatoff, H.D.; Rakowski, J.E.; Rickard, N.D.; Thompson, R.W.; Tow, D.; Lee, T.H.

    1979-12-01

    This report presents the description and validation of the analytical methods for calculation of the seismic loads on an HTGR core and the core support structures. Analytical modeling, integration schemes, parameter assignment, parameter sensitivity, and correlation with test data are key topics which have been covered in detail. Much of the text concerns the description and the results of a series of scale model tests performed to obtain data for code correlation. A discussion of scaling laws, model properties, seismic excitation, instrumentation, and data reduction methods is also presented, including a section on the identification and calculation of statistical errors in the test data

  13. Core microbiomes for sustainable agroecosystems.

    Science.gov (United States)

    Toju, Hirokazu; Peay, Kabir G; Yamamichi, Masato; Narisawa, Kazuhiko; Hiruma, Kei; Naito, Ken; Fukuda, Shinji; Ushio, Masayuki; Nakaoka, Shinji; Onoda, Yusuke; Yoshida, Kentaro; Schlaeppi, Klaus; Bai, Yang; Sugiura, Ryo; Ichihashi, Yasunori; Minamisawa, Kiwamu; Kiers, E Toby

    2018-05-01

    In an era of ecosystem degradation and climate change, maximizing microbial functions in agroecosystems has become a prerequisite for the future of global agriculture. However, managing species-rich communities of plant-associated microbiomes remains a major challenge. Here, we propose interdisciplinary research strategies to optimize microbiome functions in agroecosystems. Informatics now allows us to identify members and characteristics of 'core microbiomes', which may be deployed to organize otherwise uncontrollable dynamics of resident microbiomes. Integration of microfluidics, robotics and machine learning provides novel ways to capitalize on core microbiomes for increasing resource-efficiency and stress-resistance of agroecosystems.

  14. Generalized model for k -core percolation and interdependent networks

    Science.gov (United States)

    Panduranga, Nagendra K.; Gao, Jianxi; Yuan, Xin; Stanley, H. Eugene; Havlin, Shlomo

    2017-09-01

    Cascading failures in complex systems have been studied extensively using two different models: k -core percolation and interdependent networks. We combine the two models into a general model, solve it analytically, and validate our theoretical results through extensive simulations. We also study the complete phase diagram of the percolation transition as we tune the average local k -core threshold and the coupling between networks. We find that the phase diagram of the combined processes is very rich and includes novel features that do not appear in the models studying each of the processes separately. For example, the phase diagram consists of first- and second-order transition regions separated by two tricritical lines that merge and enclose a two-stage transition region. In the two-stage transition, the size of the giant component undergoes a first-order jump at a certain occupation probability followed by a continuous second-order transition at a lower occupation probability. Furthermore, at certain fixed interdependencies, the percolation transition changes from first-order → second-order → two-stage → first-order as the k -core threshold is increased. The analytic equations describing the phase boundaries of the two-stage transition region are set up, and the critical exponents for each type of transition are derived analytically.

  15. Effectiveness of core biopsy for screen-detected breast lesions under 10 mm: implications for surgical management.

    Science.gov (United States)

    Farshid, Gelareh; Downey, Peter; Pieterse, Steve; Gill, P Grantley

    2017-09-01

    Technical advances have improved the detection of small mammographic lesions. In the context of mammographic screening, accurate sampling of these lesions by percutaneous biopsy is crucial in limiting diagnostic surgical biopsies, many of which show benign results. Women undergoing core biopsy between January 1997 and December 2007 for core histology, 345 women (43.0%) were immediately cleared of malignancy and 300 (37.4%) were referred for definitive cancer treatment. A further 157 women (19.6%) required diagnostic surgical biopsy because of indefinite or inadequate core results or radiological-pathological discordance, and one woman (0.1%) needed further imaging in 12 months. The open biopsies were malignant in 46 (29.3%) cases. The positive predictive value of malignant core biopsy was 100%. The negative predictive value for benign core results was 97.7%, and the false-negative rate was 2.6%. The lesion could not be visualized after core biopsy in 5.1% of women and in 4.0% of women with malignant core biopsies excision specimens did not contain residual malignancy. Excessive delays in surgery because of complications of core biopsy were not reported. Even at this small size range, core biopsy evaluation of screen-detected breast lesions is highly effective and accurate. A lesion miss rate of 3.1% and under-representation of lesions on core samples highlight the continued need for multidisciplinary collaboration and selective use of diagnostic surgical biopsy. © 2015 Royal Australasian College of Surgeons.

  16. Advanced core monitoring technology for WWER reactors

    International Nuclear Information System (INIS)

    Nguyen, T.Q.; Casadei, A.L.; Doshi, P.K.

    1993-01-01

    The Westinghouse BEACON online monitoring system has been developed to provide continuous core monitoring and operational support for pressurized water reactor using movable detectors (fission chamber) and core thermocouples. The basic BEACON core monitoring methodology is described. Traditional WWER reactors use rhodium fixed in-core detectors as the means to provide detailed core power distribution for surveillance purposes. An adapted version of the BEACON advanced core monitoring and support system is described which seems to be, due to the different demand/response requirements, the optimal solution (for routine surveillance and anomaly detection) for WWER reactors with existing fixed in-core detectors. (Z.S.) 4 refs

  17. Reactor core operation management system

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Tomomi.

    1992-05-28

    Among operations of periodical inspection for a nuclear power plant, sequence, time and safety rule, as well as necessary equipments and the number thereof required for each of the operation are determined previously for given operation plannings, relevant to the reactor core operations. Operation items relative to each of coordinates of the reactor core are retrieved and arranged based on specified conditions, to use the operation equipments effectively. Further, a combination of operations, relative to the reactor core coordinates with no physical interference and shortest in accordance with safety rules is judged, and the order and the step of the operation relevant to the entire reactor core operations are planned. After the start of the operation, the necessity for changing the operation sequence is judged depending on the judgement as to whether it is conducted according to the safety rule and the deviation between the plan and the result, based on the information for the progress of each of the operations. Alternatively, the operation sequence and the step to be changed are planned again in accordance with the requirement for the change of the operation planning. Then, the shortest operation time can be planned depending on the simultaneous operation impossible condition and the condition for the operation time zone determined by labor conditions. (N.H.).

  18. Competition for cores in remanufacturing

    NARCIS (Netherlands)

    Bulmus, Serra Caner; Zhu, Stuart X.; Teunter, Ruud

    2014-01-01

    We study competition between an original equipment manufacturer (OEM) and an independently operating remanufacturer (IO). Different from the existing literature, the OEM and IO compete not only for selling their products but also for collecting returned products (cores) through their acquisition

  19. Studies on WWER core diagnostics

    International Nuclear Information System (INIS)

    Lunin, G.L.; Mitin, V.I.; Bulavin, V.V.

    1987-01-01

    The reliability and safety of nuclear power plants have decisive meaning under the situation that nuclear power generation steadily increases, and among various measures aiming at ensuring the reliability and safety in the operation of nuclear power plants, the countermeasures for protecting reactor core, main process equipment and high pressure circuits from damage have the important role, and the monitoring of condition and the organization of forecast, which are carried out continuously or periodically during the operation of nuclear power stations using the diagnostic expert system specially developed for the purpose, are included in them. Such monitoring enables the early detection of mechanical damage, increase of vibration, defects caused during operation and so on in reactor cores and primary and secondary circuits, and the continuous watching of defect developments. Also boiling in a core is detected, the place of abnormality occurrence is identified, and the intensity and characteristics of boiling are determined, thus the occurrence of dangerous condition is prevented. The developments of an in-core monitoring system and noise diagnostic systems are reported. (Kako, I.)

  20. Modeling of the reactor core

    International Nuclear Information System (INIS)

    1999-01-01

    In order to improve technical - economical parameters fuel with 2.4% enrichment and burnable absorber is started to be used at Ignalina NPP. Using code QUABOX/CUBBOX the main neutronic - physical characteristics were calculated for selected reactor core conditions

  1. Core calculational techniques and procedures

    International Nuclear Information System (INIS)

    Romano, J.J.

    1977-10-01

    Described are the procedures and techniques employed by B and W in core design analyses of power peaking, control rod worths, and reactivity coefficients. Major emphasis has been placed on current calculational tools and the most frequently performed calculations over the operating power range

  2. Water-core Fresnel fiber

    NARCIS (Netherlands)

    Martelli, C.; Canning, J.; Lyytikainen, K.; Groothoff, N.

    2005-01-01

    A water core photonic crystal Fresnel fiber exploiting a hole distribution on zone plates of a cylindrical waveguide was developed and characterized. This fiber has similar guiding properties as the pristine air-hole guiding fiber although a large loss edge ~900nm is observed indicating that the

  3. Core shift effect in blazars

    Science.gov (United States)

    Agarwal, A.; Mohan, P.; Gupta, Alok C.; Mangalam, A.; Volvach, A. E.; Aller, M. F.; Aller, H. D.; Gu, M. F.; Lähteenmäki, A.; Tornikoski, M.; Volvach, L. N.

    2017-07-01

    We studied the pc-scale core shift effect using radio light curves for three blazars, S5 0716+714, 3C 279 and BL Lacertae, which were monitored at five frequencies (ν) between 4.8 and 36.8 GHz using the University of Michigan Radio Astronomical Observatory (UMRAO), the Crimean Astrophysical Observatory (CrAO) and Metsähovi Radio Observatory for over 40 yr. Flares were Gaussian fitted to derive time delays between observed frequencies for each flare (Δt), peak amplitude (A) and their half width. Using A ∝ να, we infer α in the range of -16.67-2.41 and using Δ t ∝ ν ^{1/k_r}, we infer kr ∼ 1, employed in the context of equipartition between magnetic and kinetic energy density for parameter estimation. From the estimated core position offset (Ωrν) and the core radius (rcore), we infer that opacity model may not be valid in all cases. The mean magnetic field strengths at 1 pc (B1) and at the core (Bcore) are in agreement with previous estimates. We apply the magnetically arrested disc model to estimate black hole spins in the range of 0.15-0.9 for these blazars, indicating that the model is consistent with expected accretion mode in such sources. The power-law-shaped power spectral density has slopes -1.3 to -2.3 and is interpreted in terms of multiple shocks or magnetic instabilities.

  4. Reactor core operation management system

    International Nuclear Information System (INIS)

    Sato, Tomomi.

    1992-01-01

    Among operations of periodical inspection for a nuclear power plant, sequence, time and safety rule, as well as necessary equipments and the number thereof required for each of the operation are determined previously for given operation plannings, relevant to the reactor core operations. Operation items relative to each of coordinates of the reactor core are retrieved and arranged based on specified conditions, to use the operation equipments effectively. Further, a combination of operations, relative to the reactor core coordinates with no physical interference and shortest in accordance with safety rules is judged, and the order and the step of the operation relevant to the entire reactor core operations are planned. After the start of the operation, the necessity for changing the operation sequence is judged depending on the judgement as to whether it is conducted according to the safety rule and the deviation between the plan and the result, based on the information for the progress of each of the operations. Alternatively, the operation sequence and the step to be changed are planned again in accordance with the requirement for the change of the operation planning. Then, the shortest operation time can be planned depending on the simultaneous operation impossible condition and the condition for the operation time zone determined by labor conditions. (N.H.)

  5. Stellar core collapse and supernova

    International Nuclear Information System (INIS)

    Wilson, J.R.; Mayle, R.; Woosley, S.E.; Weaver, T.

    1985-04-01

    Massive stars that end their stable evolution as their iron cores collapse to a neutron star or black hole long been considered good candidates for producing Type II supernovae. For many years the outward propagation of the shock wave produced by the bounce of these iron cores has been studied as a possible mechanism for the explosion. For the most part, the results of these studies have not been particularly encouraging, except, perhaps, in the case of very low mass iron cores or very soft nuclear equations of state. The shock stalls, overwhelmed by photodisintegration and neutrino losses, and the star does not explode. More recently, slow late time heating of the envelope of the incipient neutron star has been found to be capable of rejuvenating the stalled shock and producing an explosion after all. The present paper discusses this late time heating and presents results from numerical calculations of the evolution, core collapse, and subsequent explosion of a number of recent stellar models. For the first time they all, except perhaps the most massive, explode with reasonable choices of input physics. 39 refs., 17 figs., 1 tab

  6. Nuclear reactor core servicing apparatus

    International Nuclear Information System (INIS)

    Andrea, C.

    1977-01-01

    Disclosed is an improved core servicing apparatus for a nuclear reactor of the type having a reactor vessel, a vessel head having a head penetration therethrough, a removable plug adapted to fit in the head penetration, and a core of the type having an array of elongated assemblies. The improved core servicing apparatus comprises a plurality of support columns suspended from the removable plug and extending downward toward the nuclear core, rigid support means carried by each of the support columns, and a plurality of servicing means for each of the support columns for servicing a plurality of assemblies. Each of the plurality of servicing means for each of the support columns is fixedly supported in a fixed array from the rigid support means. Means are provided for rotating the rigid support means and servicing means between condensed and expanded positions. When in the condensed position, the rigid support means and servicing means lie completely within the coextensive boundaries of the plug, and when in the expanded position, some of the rigid support means and servicing means lie without the coextensive boundaries of the plug

  7. One Health Core Competency Domains

    Directory of Open Access Journals (Sweden)

    Rebekah Frankson

    2016-09-01

    Full Text Available The emergence of complex global challenges at the convergence of human, animal, and environmental health has catalyzed a movement supporting ‘One Health’ approaches. Despite recognition of the importance of One Health approaches to address these complex challenges, little effort has been directed at identifying the seminal knowledge, skills and attitudes necessary for individuals to successfully contribute to One Health efforts. Between 2008 and 2011, three groups independently embarked on separate initiatives to identify core competencies for professionals involved with One Health approaches. Core competencies were considered critically important for guiding curriculum development and continuing professional education as they describe the knowledge, skills and attitudes required to be effective. A workshop was convened in 2012 to synthesize the various strands of work on One Health competencies. Despite having different mandates, participants, and approaches, all of these initiatives identified similar core competency domains: management; communication and informatics; values and ethics; leadership; teams and collaboration; roles and responsibilities; and systems thinking. These core competency domains have been used to develop new continuing professional education programs for One Health professionals and help university curricula prepare new graduates to be able to contribute more effectively to One Health approaches.

  8. One Health Core Competency Domains.

    Science.gov (United States)

    Frankson, Rebekah; Hueston, William; Christian, Kira; Olson, Debra; Lee, Mary; Valeri, Linda; Hyatt, Raymond; Annelli, Joseph; Rubin, Carol

    2016-01-01

    The emergence of complex global challenges at the convergence of human, animal, and environmental health has catalyzed a movement supporting "One Health" approaches. Despite recognition of the importance of One Health approaches to address these complex challenges, little effort has been directed at identifying the seminal knowledge, skills, and attitudes necessary for individuals to successfully contribute to One Health efforts. Between 2008 and 2011, three groups independently embarked on separate initiatives to identify core competencies for professionals involved with One Health approaches. Core competencies were considered critically important for guiding curriculum development and continuing professional education, as they describe the knowledge, skills, and attitudes required to be effective. A workshop was convened in 2012 to synthesize the various strands of work on One Health competencies. Despite having different mandates, participants, and approaches, all of these initiatives identified similar core competency domains: management; communication and informatics; values and ethics; leadership; teams and collaboration; roles and responsibilities; and systems thinking. These core competency domains have been used to develop new continuing professional education programs for One Health professionals and help university curricula prepare new graduates to be able to contribute more effectively to One Health approaches.

  9. Neutronics calculation of RTP core

    Science.gov (United States)

    Rabir, Mohamad Hairie B.; Zin, Muhammad Rawi B. Mohamed; Karim, Julia Bt. Abdul; Bayar, Abi Muttaqin B. Jalal; Usang, Mark Dennis Anak; Mustafa, Muhammad Khairul Ariff B.; Hamzah, Na'im Syauqi B.; Said, Norfarizan Bt. Mohd; Jalil, Muhammad Husamuddin B.

    2017-01-01

    Reactor calculation and simulation are significantly important to ensure safety and better utilization of a research reactor. The Malaysian's PUSPATI TRIGA Reactor (RTP) achieved initial criticality on June 28, 1982. The reactor is designed to effectively implement the various fields of basic nuclear research, manpower training, and production of radioisotopes. Since early 90s, neutronics modelling were used as part of its routine in-core fuel management activities. The are several computer codes have been used in RTP since then, based on 1D neutron diffusion, 2D neutron diffusion and 3D Monte Carlo neutron transport method. This paper describes current progress and overview on neutronics modelling development in RTP. Several important parameters were analysed such as keff, reactivity, neutron flux, power distribution and fission product build-up for the latest core configuration. The developed core neutronics model was validated by means of comparison with experimental and measurement data. Along with the RTP core model, the calculation procedure also developed to establish better prediction capability of RTP's behaviour.

  10. Postoperative atrial fibrillation in patients on statins undergoing ...

    African Journals Online (AJOL)

    Introduction: The efficacy of perioperative statin therapy in decreasing postoperative morbidity in patients undergoing valve replacements and repairs is unknown. The aim of our study was to determine whether or not the literature supports the hypothesis that statins decrease postoperative atrial fibrillation (AF), and hence ...

  11. 77 FR 6803 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-02-09

    ... pregnant during Health Questionnaire/ 750 1 20/60 NHANES 1999-2010. Consent Form. 3. State/local vital...-11CE] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and... about the pregnant women at the time of interview. Having information on their children's birth...

  12. 77 FR 37051 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-06-20

    ... Year 1 and Year 2. Informed Consent Form... 4,404 1 2/60 Non-Responder Interview. 792 1 5/60 Kimberly S...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...-minute interview will be conducted with a 10% sample of non-responders (up to 792 individuals). In order...

  13. 75 FR 68360 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2010-11-05

    ...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention... screener questionnaire will be used to determine participation eligibility and obtain oral consent. Approximately 7,000 individuals will be approached and screened (through a 2-minute interview) for eligibility...

  14. 75 FR 6671 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2010-02-10

    ... programs implemented a new consent form. This form asked participants for permission for CDC to contact...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention... prevention behaviors, CDC will conduct telephone interviews of 425 Matter of Balance program participants six...

  15. 75 FR 24706 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2010-05-05

    ... parent consent 214 1 10/60 form. Child Clinic Visit--Case 107 1 1.5 children packet. Parent Clinic Visit...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...; (4) a telephone interview focusing on pregnancy-related events and early life history (biological...

  16. 76 FR 38654 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2011-07-01

    ... consent for an interview. After the data collection phase, a multidisciplinary case review team (CRT) will... Post-Partum HIV- FIMR/HIV Maternal 300 1 1.5 infected Women. Interview Form. Daniel L. Holcomb, Reports...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

  17. 77 FR 12594 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-03-01

    ... Script. Refusal Questions Form.. 62 1 2/60 Individual Consent Form. 250 1 3/60 Contact Information Form... Screening 92 1 5/60 Survey. Informed Consent........ 50 1 1/60 Interview Questionnaire. 50 1 1 Network Size...-12-12BL] Agency Forms Undergoing Paperwork Reduction Act Review The Agency for Toxic Substances and...

  18. 76 FR 55915 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2011-09-09

    ... type 2 diabetes DPRP Application Form........ 120 1 1 prevention programs. DPRP Evaluation Data... mechanism for recognizing organizations that deliver effective, community-based type 2 diabetes prevention...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

  19. Multiple maxillofacial fractures in a patient undergoing orthodontic ...

    African Journals Online (AJOL)

    A multi-disciplinary team approach for the management of maxillofacial fractures in patients undergoing orthodontic treatment with fixed appliances is suggested. Orthodontic treatment with surgical involvement has been found to improve both facial aesthetics and occlusal function. Key words: Maxillofacial, trauma, ...

  20. Clinical effect of Fuzheng quyu therapy in patients undergoing ...

    African Journals Online (AJOL)

    Clinical effect of Fuzheng quyu therapy in patients undergoing radiotherapy after cervical carcinoma surgery. ... The clinical effects and the incidence of adverse events were compared between the groups. Results: The plasma prothrombin time and activated partial thromboplastin time improved after treatment in the study ...

  1. Coping strategies used by hospitalized children with cancer undergoing chemotherapy.

    Science.gov (United States)

    Sposito, Amanda Mota Pacciulio; Silva-Rodrigues, Fernanda Machado; Sparapani, Valéria de Cássia; Pfeifer, Luzia Iara; de Lima, Regina Aparecida Garcia; Nascimento, Lucila Castanheira

    2015-03-01

    To analyze coping strategies used by children with cancer undergoing chemotherapy during hospitalization. This was an exploratory study to analyze qualitative data using an inductive thematic analysis. Semistructured interviews using puppets were conducted with 10 children with cancer, between 7 and 12 years old, who were hospitalized and undergoing chemotherapy. The coping strategies to deal with chemotherapy were: understanding the need for chemotherapy; finding relief for the chemotherapy's side effects and pain; seeking pleasure in nourishment; engaging in entertaining activities and having fun; keeping the hope of cure alive; and finding support in religion. Children with cancer undergoing chemotherapy need to cope with hospitalizations, pain, medication side effects, idle time, and uncertainty regarding the success of treatment. These challenges motivated children to develop their own coping strategies, which were effective while undergoing chemotherapy. By gaining knowledge and further understanding about valid coping strategies during chemotherapy treatment, health professionals can mobilize personal and material resources from the children, health teams, and institutions aiming to potentiate the use of these strategies to make treatments the least traumatic. © 2015 Sigma Theta Tau International.

  2. 75 FR 65489 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2010-10-25

    ... children. The three environmental chemicals, Bisphenol A (BPA), phthalates, and mercury have been selected...] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention (CDC) publishes a list of information collection requests under review by the Office of Management and...

  3. 77 FR 76045 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-12-26

    ... case classification (disease staging system). Recommendations for revisions in the case definition were... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [30Day-13-0573] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

  4. post-operative morbidity of the obese patient undergoing posterior

    African Journals Online (AJOL)

    urinary tract infection, neurological injury and dural tears. Methods: One hundred consecutive patients undergoing ... muscle mass in the human body, in which weight in kilograms is divided by height in meters2). The current .... complications with the exception of one dural tear occurred in the obese patient group. Table 3.

  5. Post-operative morbidity of the obese patient undergoing posterior ...

    African Journals Online (AJOL)

    Outcome measures: Post-operative morbidity measures – infection, seroma, pulmonary embolism, urinary tract infection, neurological injury and dural tears. Methods: One hundred consecutive patients undergoing posterior lumbar spine surgery were enrolled in the study. Three fellowship trained attending orthopaedic ...

  6. Quality of Life in End Stage Renal Failure Patients Undergoing ...

    African Journals Online (AJOL)

    We assessed the quality of life of 45 patients with end stage renal failure undergoing dialysis in Mauritius using the standard United Kingdom version of the Short Form 36 Items Health Survey (SF36) questionnaire. Our findings showed that gender, level of social and emotional support, marital status, and travel time were ...

  7. Factors affecting quality of life in cancer patients undergoing ...

    African Journals Online (AJOL)

    Factors affecting quality of life in cancer patients undergoing chemotherapy. ... Objective: The aim of this study was to evaluate the QoL in cancer patients with solid tumors and at the different chemotherapy cycles (CT). ... Results: A significant relationship between the cancer type, pain intensity, and fatigue was found.

  8. Electroacupuncture for Bladder Function Recovery in Patients Undergoing Spinal Anesthesia

    OpenAIRE

    Gao, Yinqiu; Zhou, Xinyao; Dong, Xichen; Jia, Qing; Xie, Shen; Pang, Ran

    2014-01-01

    Purpose. To determine the efficacy of electroacupuncture on recovering postanesthetic bladder function. Materials and Methods. Sixty-one patients undergoing spinal anaesthesia were recruited and allocated into electroacupuncture or control group randomly. Patients in electroacupuncture group received electroacupuncture therapy whereas ones in control group were not given any intervention. Primary endpoint was incidence of bladder overdistension and postoperative urinary retention. Secondary ...

  9. 77 FR 40363 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-07-09

    ... Methicillin-resistant Staphylococcus aureus (MRSA) among Patients Recently Discharged from Acute Care... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [30-Day-12-12II] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

  10. 78 FR 40151 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2013-07-03

    ... resistant Staphylococcus aureus ABCs Case Report Form. ABCs Invasive Pneumococcal 10 41 10/60 Disease in... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [30-Day 13-13DB] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

  11. 75 FR 20601 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2010-04-20

    .... Proposed Project Asthma Information Reporting System (AIRS)--New--Air Pollution and Respiratory Health... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [30Day-10-09CK] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and prevention...

  12. 78 FR 24422 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2013-04-25

    ... System (AIRS) (0920-0853, Expiration 06/30/2013)--Extension--Air Pollution and Respiratory Health Branch... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [30Day-13-0853] Agency Forms Undergoing Paperwork Reduction Act Review The Centers for Disease Control and Prevention...

  13. The core to regulatory reform

    International Nuclear Information System (INIS)

    Partridge, J.W. Jr.

    1993-01-01

    Federal Energy Regulatory Commission (FERC) Orders 436, 500, and 636, the Clean Air Act Amendments of 1990, Public Utility Holding Company Act reform, and the 1992 Energy Policy Act all can have significant effects on an LDC's operations. Such changes in an LDC's environments must be balanced by changes within the utility, its marketplace, and its state regulatory environment. The question is where to start. For Columbia Gas Distribution Cos., based in Columbus, OH, the new operating foundation begins with each employee. Internal strength is critical in designing initiatives that meet the needs of the marketplace and are well-received by regulators. Employees must understand not only the regulatory environment in which the LDC operates, but also how their work contributes to a positive regulatory relationship. To achieve this, Columbia initiated the COntinuing Regulatory Education program, or CORE, in 1991. CORE is a regulatory-focused, information-initiative program coordinated by Columbia's Regulatory Policy, Planning, and Government Affairs Department. The CORE programs can take many forms, such as emerging issue discussions, dialogues with regulators and key parties, updates on regulatory fillings, regulatory policy meetings, and formal training classes. The speakers and discussion facilitators can range from human resource department trainers to senior officers, from regulatory department staff members to external experts, or from state commissioners to executives from other LDCs. The goals of CORE initiatives are to: Support a professional level of regulatory expertise through employee participation in well-developed regulatory programs presented by credible experts. Encourage a constructive state regulatory environment founded on communication and cooperation. CORE achieves these goals via five program levels: introductory basics, advanced learning, professional expertise, crossfunctional dialogues, and external idea exchanges

  14. 76 FR 44337 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2011-07-25

    ... issues, such as cancer, diabetes, and access to health care. It is a leading source of data for the... 1 23/60 Adult Core (sample adult) 44,250 1 14/60 Child Core (adult family member) 17,550 1 9/60 Child Record Check (medical provider) 2,120 1 5/60 Teen Record Check (medical provider) 8,450 1 5/60...

  15. CORE

    DEFF Research Database (Denmark)

    Krigslund, Jeppe; Hansen, Jonas; Hundebøll, Martin

    2013-01-01

    State-of-the-art in network coding for wireless, meshed networks typically considers two problems separately. First, the problem of providing reliability for a single session. Second, the problem of opportunistic combination of flows by using minimalistic coding, i.e., by XORing packets from diff...

  16. Conceptual core model for the reactor core test

    International Nuclear Information System (INIS)

    Swenson, L.D.

    1970-01-01

    Several design options for the ZrH Flight System Reactor were investigated which involved tradeoffs of core excess reactivity, reactor control, coolant mixing and cladding thickness. A design point was selected which is to be the basis for more detailed evaluation in the preliminary design phase. The selected design utilizes 295 elements with 0.670 inch element-to-element pitch, 32 mil thick Incoloy cladding, 18.00 inches long fuel meat, hydrogen content of 6.3 x 10 22 atoms/cc fuel, 10.5 w/o uranium, and a spiraled fin configuration with alternate elements having fins with spiral to the right, spiral to the left, and no fin at all (R-L-N fin configuration). Fin height is 30 mils for the center region of the core and 15 mils for the outer region. (U.S.)

  17. Core mechanics and configuration behavior of advanced LMFBR core restraint concepts

    International Nuclear Information System (INIS)

    Fox, J.N.; Wei, B.C.

    1978-02-01

    Core restraint systems in LMFBRs maintain control of core mechanics and configuration behavior. Core restraint design is complex due to the close spacing between adjacent components, flux and temperature gradients, and irradiation-induced material property effects. Since the core assemblies interact with each other and transmit loads directly to the core restraint structural members, the core assemblies themselves are an integral part of the core restraint system. This paper presents an assessment of several advanced core restraint system and core assembly concepts relative to the expected performance of currently accepted designs. A recommended order for the development of the advanced concepts is also presented

  18. Cores to the rescue: how old cores enable new science

    Science.gov (United States)

    Ito, E.; Noren, A. J.; Brady, K.

    2016-12-01

    The value of archiving scientific specimens and collections for the purpose of enabling further research using new analytical techniques, resolving conflicting results, or repurposing them for entirely new research, is often discussed in abstract terms. We all agree that samples with adequate metadata ought to be archived systematically for easy access, for a long time and stored under optimal conditions. And yet, as storage space fills, there is a temptation to cull the collection, or when a researcher retires, to discard the collection unless the researcher manages to make his or her own arrangement for the collection to be accessioned elsewhere. Nobody has done anything with these samples in over 20 years! Who would want them? It turns out that plenty of us do want them, if we know how to find them and if they have sufficient metadata to assess past work and suitability for new analyses. The LacCore collection holds over 33 km of core from >6700 sites in diverse geographic locations worldwide with samples collected as early as 1950s. From these materials, there are many examples to illustrate the scientific value of archiving geologic samples. One example that benefitted Ito personally were cores from Lakes Mirabad and Zeribar, Iran, acquired in 1963 by Herb Wright and his associates. Several doctoral and postdoctoral students generated and published paleoecological reconstructions based on cladocerans, diatoms, pollen or plant macrofossils, mostly between 1963 and 1967. The cores were resampled in 1990s by a student being jointly advised by Wright and Ito for oxygen isotope analysis of endogenic calcite. The results were profitably compared with pollen and the results published in 2001 and 2006. From 1979 until very recently, visiting Iran for fieldwork was not pallowed for US scientists. Other examples will be given to further illustrate the power of archived samples to advance science.

  19. Separated core turbofan engine; Core bunrigata turbofan engine

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Y; Endo, M; Matsuda, Y; Sugiyama, N; Sugahara, N; Yamamoto, K [National Aerospace Laboratory, Tokyo (Japan)

    1996-04-01

    This report outlines the separated core turbofan engine. This engine is featured by parallel separated arrangement of a fan and core engine which are integrated into one unit in the conventional turbofan engine. In general, cruising efficiency improvement and noise reduction are achieved by low fan pressure ratio and low exhaust speed due to high bypass ratio, however, it causes various problems such as large fan and nacelle weight due to large air flow rate of a fan, and shift of an operating point affected by flight speed. The parallel separated arrangement is thus adopted. The stable operation of a fan and core engine is easily retained by independently operating air inlet unaffected by fan. The large degree of freedom of combustion control is also obtained by independent combustor. Fast response, simple structure and optimum aerodynamic design are easily achieved. This arrangement is also featured by flexibility of development and easy maintenance, and by various merits superior to conventional turbofan engines. It has no technological problems difficult to be overcome, and is also suitable for high-speed VTOL transport aircraft. 4 refs., 5 figs.

  20. Reactor core in FBR type reactor

    International Nuclear Information System (INIS)

    Masumi, Ryoji; Kawashima, Katsuyuki; Kurihara, Kunitoshi.

    1989-01-01

    In a reactor core in FBR type reactors, a portion of homogenous fuels constituting the homogenous reactor core is replaced with multi-region fuels in which the enrichment degree of fissile materials is lower nearer to the axial center. This enables to condition the composition such that a reactor core having neutron flux distribution either of a homogenous reactor core or a heterogenous reactor core has substantially identical reactivity. Accordingly, in the transfer from the homogenous reactor core to the axially heterogenous reactor core, the average reactivity in the reactor core is substantially equal in each of the cycles. Further, by replacing a portion of the homogenous fuels with a multi-region fuels, thereby increasing the heat generation near the axial center, it is possiable to reduce the linear power output in the regions above and below thereof and, in addition, to improve the thermal margin in the reactor core. (T.M.)

  1. Espaço de cores

    Directory of Open Access Journals (Sweden)

    Claudia Feitosa-Santana

    2006-01-01

    Full Text Available O artigo apresenta definições para os termos espaço de cores e sistemas de cores; classifica, de acordo com David Brainard (2003, os sistemas de cores em dois grupos: aparência de cores e diferenças de cores. Dentre os diversos sistemas de cores existentes, o artigo descreve dois deles: o sistema de cores Munsell &– um dos mais utilizados entre os sistemas de aparência de cores &– e a descrição do sistema de cores CIE 1931 &– um dos mais utilizados dentre os sistemas de diferença de cores. Faz-se uma retrospectiva histórica da busca por espaços de cores que representem a percepção de cores humana assim como as diversas reconstruções de espaços de cores por métodos eletrofisiológicos ou psicofísicos. Muitas dessas reconstruções utilizam a escala multidimensional (mds. O artigo também introduz a possibilidade da reconstrução dos espaços de cores de pacientes com discromatopsia adquirida como uma distorção do espaço de indivíduos tricromatas normais.

  2. Conceptual study of advanced PWR core design

    International Nuclear Information System (INIS)

    Kim, Young Jin; Chang, Moon Hee; Kim, Keung Ku; Joo, Hyung Kuk; Kim, Young Il; Noh, Jae Man; Hwang, Dae Hyun; Kim, Taek Kyum; Yoo, Yon Jong.

    1997-09-01

    The purpose of this project is for developing and verifying the core design concepts with enhanced safety and economy, and associated methodologies for core analyses. From the study of the sate-of-art of foreign advanced reactor cores, we developed core concepts such as soluble boron free, high convertible and enhanced safety core loaded semi-tight lattice hexagonal fuel assemblies. To analyze this hexagonal core, we have developed and verified some neutronic and T/H analysis methodologies. HELIOS code was adopted as the assembly code and HEXFEM code was developed for hexagonal core analysis. Based on experimental data in hexagonal lattices and the COBRA-IV-I code, we developed a thermal-hydraulic analysis code for hexagonal lattices. Using the core analysis code systems developed in this project, we designed a 600 MWe core and studied the feasibility of the core concepts. Two additional scopes were performed in this project : study on the operational strategies of soluble boron free core and conceptual design of large scale passive core. By using the axial BP zoning concept and suitable design of control rods, this project showed that it was possible to design a soluble boron free core in 600 MWe PWR. The results of large scale core design showed that passive concepts and daily load follow operation could be practiced. (author). 15 refs., 52 tabs., 101 figs

  3. Conceptual study of advanced PWR core design

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Chang, Moon Hee; Kim, Keung Ku; Joo, Hyung Kuk; Kim, Young Il; Noh, Jae Man; Hwang, Dae Hyun; Kim, Taek Kyum; Yoo, Yon Jong

    1997-09-01

    The purpose of this project is for developing and verifying the core design concepts with enhanced safety and economy, and associated methodologies for core analyses. From the study of the sate-of-art of foreign advanced reactor cores, we developed core concepts such as soluble boron free, high convertible and enhanced safety core loaded semi-tight lattice hexagonal fuel assemblies. To analyze this hexagonal core, we have developed and verified some neutronic and T/H analysis methodologies. HELIOS code was adopted as the assembly code and HEXFEM code was developed for hexagonal core analysis. Based on experimental data in hexagonal lattices and the COBRA-IV-I code, we developed a thermal-hydraulic analysis code for hexagonal lattices. Using the core analysis code systems developed in this project, we designed a 600 MWe core and studied the feasibility of the core concepts. Two additional scopes were performed in this project : study on the operational strategies of soluble boron free core and conceptual design of large scale passive core. By using the axial BP zoning concept and suitable design of control rods, this project showed that it was possible to design a soluble boron free core in 600 MWe PWR. The results of large scale core design showed that passive concepts and daily load follow operation could be practiced. (author). 15 refs., 52 tabs., 101 figs.

  4. Analysis Of Core Management For The Transition Cores Of RSG-GAS Reactor To Full-Silicide Core

    International Nuclear Information System (INIS)

    Malem Sembiring, Tagor; Suparlina, Lily; Tukiran

    2001-01-01

    The core conversion of RSG-GAS reactor from oxide to silicide core with meat density of 2.96 g U/cc is still doing. At the end of 2000, the reactor has been operated for 3 transition cores which is the mixed core of oxide-silicide. Based on previous work, the calculated core parameter for the cores were obtained and it is needed 10 transition cores to achieve a full-silicide core. The objective of this work is to acquire the effect of the increment of the number of silicide fuel on the core parameters such as excess reactivity and shutdown margin. The measurement of the core parameters was carried out using the method of compensation of couple control rods. The experiment shows that the excess reactivity trends lower with the increment of the number of silicide fuel in the core. However, the shutdown margin is not change with the increment of the number of silicide fuel. Therefore, the transition cores can be operated safety to a full-silicide core

  5. Simulation experiments concerning core meltdown

    International Nuclear Information System (INIS)

    Werle, H.

    1979-01-01

    A gas stream causes a remarkable increase in the interfacial heat flux (by a factor of 8 for v = 0.63 cm/s, v = gas volume flux/horizontal area). The most important characteristics of the system investigated (silicon oil/wood metal) are relatively similar to those of a core melt, Therefore a remarkable increase of the interfacial heat transfer by the gas release may be expected also for a core melt, compared with earlier investigations at the system silicon oil/water the influence of a gas stream is nevertheless remarkably lower for silicon oil/wood metal. This shows that the density ratio plays an important role. (orig./RW) [de

  6. Phase locking of vortex cores in two coupled magnetic nanopillars

    Directory of Open Access Journals (Sweden)

    Qiyuan Zhu

    2014-11-01

    Full Text Available Phase locking dynamics of the coupled vortex cores in two identical magnetic spin valves induced by spin-polarized current are studied by means of micromagnetic simulations. Our results show that the available current range of phase locking can be expanded significantly by the use of constrained polarizer, and the vortices undergo large orbit motions outside the polarization areas. The effects of polarization areas and dipolar interaction on the phase locking dynamics are studied systematically. Phase locking parameters extracted from simulations are discussed by theoreticians. The dynamics of vortices influenced by spin valve geometry and vortex chirality are discussed at last. This work provides deeper insights into the dynamics of phase locking and the results are important for the design of spin-torque nano-oscillators.

  7. Excitation of neutron flux waves in reactor core transients

    International Nuclear Information System (INIS)

    Carew, J.F.; Neogy, P.

    1983-01-01

    An analysis of the excitation of neutron flux waves in reactor core transients has been performed. A perturbation theory solution has been developed for the time-dependent thermal diffusion equation in which the absorption cross section undergoes a rapid change, as in a PWR rod ejection accident (REA). In this analysis the unperturbed reactor flux states provide the basis for the spatial representation of the flux solution. Using a simplified space-time representation for the cross section change, the temporal integrations have been carried out and analytic expressions for the modal flux amplitudes determined. The first order modal excitation strength is determined by the spatial overlap between the initial and final flux states, and the cross section perturbation. The flux wave amplitudes are found to be largest for rapid transients involving large reactivity perturbations

  8. TMI-2 core examination plan

    International Nuclear Information System (INIS)

    Carlson, J.O.

    1984-07-01

    The role of the Three Mile Island Unit 2 (TMI-2) core examination in the resolution of major nuclear safety issues is delineated in this plan. Relevant data needs are discussed, and approaches for recovering data from the TMI-2 plant are identified. Specific recommendations and justifications are provided for in situ documentation and off-site artifact examination activities. The research and development program is being managed by EG and G Idaho, Inc

  9. Lanczos Tridiagonalization and Core Problems

    Czech Academy of Sciences Publication Activity Database

    Hnětynková, Iveta; Strakoš, Zdeněk

    2007-01-01

    Roč. 421, č. 2-3 (2007), s. 243-251 ISSN 0024-3795 R&D Projects: GA AV ČR 1ET400300415 Institutional research plan: CEZ:AV0Z10300504 Keywords : linear approximation problem * orthogonal transformation * core problem * Golub-Kahan bidiagonalization * Lanczos tridiagonalization * Jacobi matrix Subject RIV: BA - General Mathematics Impact factor: 0.702, year: 2007

  10. Core curriculum illustration: rib fractures.

    Science.gov (United States)

    Dunham, Gregor M; Perez-Girbes, Alexandre; Linnau, Ken F

    2017-06-01

    This is the 24th installment of a series that will highlight one case per publication issue from the bank of cases available online as part of the American Society of Emergency Radiology (ASER) educational resources. Our goal is to generate more interest in and use of our online materials. To view more cases online, please visit the ASER Core Curriculum and Recommendations for Study online at http://www.aseronline.org/curriculum/toc.htm .

  11. Core labour standards and exports

    OpenAIRE

    Siroën, Jean-Marc

    2017-01-01

    (english) Core labour standards defined by the ILO in 1998 are universal, but applied very differently across countries. Compliance is much higher in high income countries. However, the causality between improved labour standards and economic growth remains a controversial issue. Export-led growth strategies might encourage developing countries to curb the process of standards improvement. In this way, they can raise the volume of their unskilled labour endowments (child and/or forced labour)...

  12. Nuclear reactor core safety device

    International Nuclear Information System (INIS)

    Colgate, S.A.

    1977-01-01

    The danger of a steam explosion from a nuclear reactor core melt-down can be greatly reduced by adding a gasifying agent to the fuel that releases a large amount of gas at a predetermined pre-melt-down temperature that ruptures the bottom end of the fuel rod and blows the finely divided fuel into a residual coolant bath at the bottom of the reactor. This residual bath should be equipped with a secondary cooling loop

  13. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Aoyama, Motoo; Koyama, Jun-ichi; Uchikawa, Sadao; Bessho, Yasunori; Nakajima, Akiyoshi; Maruyama, Hiromi; Ozawa, Michihiro; Nakamura, Mitsuya.

    1990-01-01

    The present invention concerns fuel assemblies charged in a BWR type reactor and the reactor core. The fuel assembly comprises fuel rods containing burnable poisons and fuel rods not containing burnable poisons. Both of the highest and the lowest gadolinia concentrations of the fuel rods containing gadolinia as burnable poisons are present in the lower region of the fuel assembly. This can increase the spectral shift effect without increasing the maximum linear power density. (I.N.)

  14. Accelerator driven sub-critical core

    Science.gov (United States)

    McIntyre, Peter M; Sattarov, Akhdiyor

    2015-03-17

    Systems and methods for operating an accelerator driven sub-critical core. In one embodiment, a fission power generator includes a sub-critical core and a plurality of proton beam generators. Each of the proton beam generators is configured to concurrently provide a proton beam into a different area of the sub-critical core. Each proton beam scatters neutrons within the sub-critical core. The plurality of proton beam generators provides aggregate power to the sub-critical core, via the proton beams, to scatter neutrons sufficient to initiate fission in the sub-critical core.

  15. Emergency reactor core cooling facility

    International Nuclear Information System (INIS)

    Yoshikawa, Kazuhiro; Kinoshita, Shoichiro; Iwata, Yasutaka.

    1996-01-01

    The present invention provides an emergency reactor core cooling device for a BWR type nuclear power plant. Namely, D/S pit (gas/water separator storage pool) water is used as a water source for the emergency reactor core cooling facility upon occurrence of loss of coolant accidents (LOCA) by introducing the D/S pit water to the emergency reactor core cooling (ECCS) pump. As a result, the function as the ECCS facility can be eliminated from the function of the condensate storage tank which has been used as the ECCS facility. If the function is unnecessary, the level of quality control and that of earthquake resistance of the condensate storage tank can be lowered to a level of ordinary facilities to provide an effect of reducing the cost. On the other hand, since the D/S pit as the alternative water source is usually a facility at high quality control level and earthquake resistant level, there is no problem. The quality of the water in the D/S pit can be maintained constant by elevating pressure of the D/S pit water by a suppression pool cleanup (SPCU) pump to pass it through a filtration desalter thereby purifying the D/S pit water during the plant operation. (I.S.)

  16. Conceptual design of PFBR core

    International Nuclear Information System (INIS)

    Lee, S.M.; Govindarajan, S.; Indira, R.; John, T.M.; Mohanakrishnan, P.; Shankar Singh, R.; Bhoje, S.B.

    1996-01-01

    The design options selected for the core of the 500 MWe Prototype Fast Breeder Reactor are presented. PFBR has a conventional mixed oxide fuel core of homogeneous type with two enrichment zones for power flattening and with radial and axial blankets to make the reactor self-sustaining in fissile material. Pin diameter has been selected for minimization of fissile inventory. Considerations for the choice of number of pins per subassembly, integrated versus separate axial blankets, and other pin and subassembly parameters are discussed. As the core size is moderate, no special schemes for reducing the maximum positive sodium voiding coefficient is envisages. Two independent, diverse fast acting shutdown systems working in fail-safe mode are selected. The number of absorber rods has been minimized by choosing a layout for maximum antishadow effect. Nine control and safety rods are distributed in two rods for power flattening by differential insertion. Three Diverse Safety Rods, are also provided which are normally fully withdrawn. The optimization of layout of radial and axial shielding and adequacy of flux at detector location are also discussed. (author). 2 figs

  17. Grain alignment in starless cores

    Energy Technology Data Exchange (ETDEWEB)

    Jones, T. J.; Bagley, M. [Minnesota Institute for Astrophysics, University of Minnesota, Minneapolis, MN 55455 (United States); Krejny, M. [Cree Inc., 4600 Silicon Dr., Durham, NC (United States); Andersson, B.-G. [SOFIA Science Center, USRA, Moffett Field, CA (United States); Bastien, P., E-mail: tjj@astro.umn.edu [Centre de recherche en astrophysique du Québec and Départment de Physique, Université de Montréal, Montréal (Canada)

    2015-01-01

    We present near-IR polarimetry data of background stars shining through a selection of starless cores taken in the K band, probing visual extinctions up to A{sub V}∼48. We find that P{sub K}/τ{sub K} continues to decline with increasing A{sub V} with a power law slope of roughly −0.5. Examination of published submillimeter (submm) polarimetry of starless cores suggests that by A{sub V}≳20 the slope for P versus τ becomes ∼−1, indicating no grain alignment at greater optical depths. Combining these two data sets, we find good evidence that, in the absence of a central illuminating source, the dust grains in dense molecular cloud cores with no internal radiation source cease to become aligned with the local magnetic field at optical depths greater than A{sub V}∼20. A simple model relating the alignment efficiency to the optical depth into the cloud reproduces the observations well.

  18. Emergency reactor core cooling facility

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, Kazuhiro; Kinoshita, Shoichiro; Iwata, Yasutaka

    1996-11-01

    The present invention provides an emergency reactor core cooling device for a BWR type nuclear power plant. Namely, D/S pit (gas/water separator storage pool) water is used as a water source for the emergency reactor core cooling facility upon occurrence of loss of coolant accidents (LOCA) by introducing the D/S pit water to the emergency reactor core cooling (ECCS) pump. As a result, the function as the ECCS facility can be eliminated from the function of the condensate storage tank which has been used as the ECCS facility. If the function is unnecessary, the level of quality control and that of earthquake resistance of the condensate storage tank can be lowered to a level of ordinary facilities to provide an effect of reducing the cost. On the other hand, since the D/S pit as the alternative water source is usually a facility at high quality control level and earthquake resistant level, there is no problem. The quality of the water in the D/S pit can be maintained constant by elevating pressure of the D/S pit water by a suppression pool cleanup (SPCU) pump to pass it through a filtration desalter thereby purifying the D/S pit water during the plant operation. (I.S.)

  19. Reactor core of nuclear reactor

    International Nuclear Information System (INIS)

    Sasagawa, Masaru; Masuda, Hiroyuki; Mogi, Toshihiko; Kanazawa, Nobuhiro.

    1994-01-01

    In a reactor core, a fuel inventory at an outer peripheral region is made smaller than that at a central region. Fuel assemblies comprising a small number of large-diameter fuel rods are used at the central region and fuel assemblies comprising a great number of smalldiameter fuel rods are used at the outer peripheral region. Since a burning degradation rate of the fuels at the outer peripheral region can be increased, the burning degradation rate at the infinite multiplication factor of fuels at the outer region can substantially be made identical with that of the fuels in the inner region. As a result, the power distribution in the direction of the reactor core can be flattened throughout the entire period of the burning cycle. Further, it is also possible to make the degradation rate of fuels at the outer region substantially identical with that of fuels at the inner side. A power peak formed at the outer circumferential portion of the reactor core of advanced burning can be lowered to improve the fuel integrity, and also improve the reactor safety and operation efficiency. (N.H.)

  20. Small-bowel neoplasms in patients undergoing video capsule endoscopy

    DEFF Research Database (Denmark)

    Rondonotti, E; Pennazio, M; Toth, E

    2008-01-01

    BACKGROUND AND STUDY AIM: Small-bowel tumors account for 1% - 3% of all gastrointestinal neoplasms. Recent studies with video capsule endoscopy (VCE) suggest that the frequency of these tumors may be substantially higher than previously reported. The aim of the study was to evaluate the frequency......, clinical presentation, diagnostic/therapeutic work-up, and endoscopic appearance of small-bowel tumors in a large population of patients undergoing VCE. PATIENTS AND METHODS: Identification by a questionnaire of patients with VCE findings suggesting small-bowel tumors and histological confirmation...... of the neoplasm seen in 29 centers of 10 European Countries. RESULTS: Of 5129 patients undergoing VCE, 124 (2.4%) had small-bowel tumors (112 primary, 12 metastatic). Among these patients, indications for VCE were: obscure gastrointestinal bleeding (108 patients), abdominal pain (9), search for primary neoplasm...

  1. Rosuvastatin and cardiovascular events in patients undergoing hemodialysis

    DEFF Research Database (Denmark)

    Fellström, Bengt C; Jardine, Alan G; Schmieder, Roland E

    2009-01-01

    . Secondary end points included death from all causes and individual cardiac and vascular events. RESULTS: After 3 months, the mean reduction in low-density lipoprotein (LDL) cholesterol levels was 43% in patients receiving rosuvastatin, from a mean baseline level of 100 mg per deciliter (2.6 mmol per liter......BACKGROUND: Statins reduce the incidence of cardiovascular events in patients at high cardiovascular risk. However, a benefit of statins in such patients who are undergoing hemodialysis has not been proved. METHODS: We conducted an international, multicenter, randomized, double-blind, prospective...... trial involving 2776 patients, 50 to 80 years of age, who were undergoing maintenance hemodialysis. We randomly assigned patients to receive rosuvastatin, 10 mg daily, or placebo. The combined primary end point was death from cardiovascular causes, nonfatal myocardial infarction, or nonfatal stroke...

  2. Estimation of organ doses of patient undergoing hepatic chemoembolization procedures

    International Nuclear Information System (INIS)

    Jaramillo, G.W.; Kramer, R.; Khoury, H.J.; Barros, V.S.M.; Andrade, G.

    2015-01-01

    The aim of this study is to evaluate the organ doses of patients undergoing hepatic chemoembolization procedures performed in two hospitals in the city of Recife-Brazil. Forty eight patients undergoing fifty hepatic chemoembolization procedures were investigated. For the 20 cases with PA projection only, organ and tissue absorbed doses as well as radiation risks were calculated. For this purpose organs and tissues dose to KAP conversion coefficients were calculated using the mesh-based phantom series FASH and MASH coupled to the EGSnrc Monte Carlo code. Clinical, dosimetric and irradiations parameters were registered for all patients. The maximum organ doses found were 1.72 Gy, 0.65Gy, 0.56 Gy and 0.33 Gy for skin, kidneys, adrenals and liver, respectively. (authors)

  3. Drilling equipment for difficult coring conditions: a new type of core lifter and triple tube core barrel

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, J B

    1968-08-01

    Although considerable improvements in diamond drilling equipment have been made since the early 1950's, deficiencies in existing equipment led to the development of a new type core lifter and special 20 ft triple tube core barrel designed to operate in bad coring conditions. It is claimed that although developed essentially for coal drilling, the new equipment could be adapted to other fields of diamond drilling with the cost advantage of increased life of the core lifter.

  4. Whole core transport calculation for the VHTR hexagonal core

    International Nuclear Information System (INIS)

    Cho, J. Y.; Kim, K. S.; Lee, C. C.; Joo, H. G.

    2007-01-01

    Recently, the DeCART code which performs the whole core calculation by coupling the radial MOC transport kernel with the axial nodal kernel has equipped a kernel to deal with the hexagonal geometry and applied to the VHTR hexagonal core to examine the accuracy and the computational efficiency of the implemented kernel. The implementation includes a modular ray tracing module based on the hexagonal assembly and a multi-group CMFD module to perform an efficient transport calculation. The requirements for the modular ray are: (1) the assembly based path linking and (2) the complete reflection capabilities. The first requirement is met by adjusting the azimuthal angle and the ray spacing for the modular ray to construct a core ray by the path linking. The second requirement is met by expanding the constructed azimuthal angle in the range of [0,30 degree] to the remained range to reflect completely at the core boundaries. The considered reflecting surface angles for the complete reflection are 30n's (n=1,2,1,12). The CMFD module performs the equivalent diffusion calculation to the radial MOC transport calculation based on the homogenized structure units. The structure units include the hexagonal pin cells and gap cells appearing at the assembly boundary. Therefore, the CMFD module is programmed to deal with the unstructured cells such as the gap cells. The CMFD equation consists of the two parts of (1) the conventional FDM and (2) the current corrective parts. Since the second part of the CMFD equation guarantees the reproducibility of the radial MOC transport solutions for the cell averaged reaction rate and the net current at the cell surfaces, how to build the first part of the CMFD equation is not important. Therefore, the first part of the CMFD equation is roughly built by using the normal distance from the gravity center to the surface. The VHTR core uses helium as a coolant which is realized as a void hole in a neutronics calculation. This void hole which

  5. Nuclear characteristic simulation device for reactor core

    International Nuclear Information System (INIS)

    Arakawa, Akio; Kobayashi, Yuji.

    1994-01-01

    In a simulation device for nuclear characteristic of a PWR type reactor, there are provided a one-dimensional reactor core dynamic characteristic model for simulating one-dimensional neutron flux distribution in the axial direction of the reactor core and average reactor power based on each of inputted signals of control rod pattern, a reactor core flow rate, reactor core pressure and reactor core inlet enthalphy, and a three-dimensional reactor core dynamic characteristic mode for simulating three-dimensional power distribution of the reactor core, and a nuclear instrumentation model for calculating read value of the nuclear instrumentation disposed in the reactor based on the average reactor core power and the reactor core three-dimensional power distribution. A one-dimensional neutron flux distribution in the axial direction of the reactor core, a reactor core average power, a reactor core three-dimensional power distribution and a nuclear instrumentation read value are calculated. As a result, the three-dimensional power distribution and the power level are continuously calculated. Further, since the transient change of the three-dimensional neutron flux distribution is calculated accurately on real time, more actual response relative to a power monitoring device of the reactor core and operation performance can be simulated. (N.H.)

  6. VBAC In Women Undergoing IOL With Dinoprostone Versus Spontaneous Labor

    OpenAIRE

    Alves, João; Vilhena, Cristina; Tomás, Cláudia; Antunes, Isabel Lobo; Metello, José; Natário, Isabel; Puga, Marco; Casal, Ester

    2015-01-01

    Sem PDF OBJECTIVE: To compare the rate of vaginal birth in women attempting vaginal birth after caesarean delivery (VBAC) through labour induction with dinoprostone versus a trial of spontaneous labour. METHODS: A 10-year retrospective cohort study in a tertiary care hospital of women with one prior caesarean delivery. Women who attempted VBAC with labour induction with dinoprostone were compared with women undergoing spontaneous labour. Logistic regression analyses were performed to asses...

  7. Tumor‐associated DNA mutation detection in individuals undergoing colonoscopy

    OpenAIRE

    Fleshner, Phillip; Braunstein, Glenn D.; Ovsepyan, Gayane; Tonozzi, Theresa R.; Kammesheidt, Anja

    2017-01-01

    Abstract The majority of colorectal cancers (CRC) harbor somatic mutations and epigenetic modifications in the tumor tissue, and some of these mutations can be detected in plasma as circulating tumor DNA (ctDNA). Precancerous colorectal lesions also contain many of these same mutations. This study examined plasma for ctDNA from patients undergoing a screening or diagnostic colonoscopy to determine the sensitivity and specificity of the ctDNA panel for detecting CRC and precancerous lesions. T...

  8. Salivary function in patients with chronic renal failure undergoing hemodialysis

    International Nuclear Information System (INIS)

    Kaya, M.; Cermik, T.F.; Uestuen, F.; Sen, S.; Berkarda, S.

    2002-01-01

    The aim of this study was to evaluate the changes in salivary gland function in patients with chronic renal failure (CRF) undergoing hemodialysis. The group consisted of 23 patients with CRF (13 female, 10 male; mean age: 40±13 yr) and 14 healthy control subjects (mean age: 40±13 yr). All underwent dynamic salivary gland scintigraphy with gustatory stimulation. After intravenous administration of 99m Tc pertechnetate, first, perfusion images at 2 seconds per frame were acquired for 1 minute, then dynamic images at 1 minute per frame were acquired for 45 minutes. At 30 minutes after injection , 10 ml lemon juice was given for 15 minutes as a gustatory stimulus. We obtained time-activity curves derived from regions of interest centered over the four major salivary glands. The following functional indices were calculated for each gland: the time of maximum radioactivity (T max ) for the prestimulated period, the time of minimum radioactivity (T min ), as an indicator of velocity of secretion after stimulation, and the Lem E 5 % value as an indicator of the secretion function. When the patients with CRF undergoing hemodialysis were compared to the controls, there were statistically significant differences in T max , T min and Lem E 5 % values for bilateral parotid glands, and T min values for bilateral submandibular glands (p max and Lem E 5 % values for bilateral submandibular glands. There were also significant differences in T max and Lem E 5 % values for bilateral parotid glands between mild oral problems and severe oral problems in patients with CRF (undergoing hemodialysis). In this study, prolonged T max and T min values, and decreased Lem E 5 % values for parotid glands and prolonged T min values for submandibular glands on salivary scintigraphy pointed out decreased parenchymatous and excretory function in patients with CRF undergoing hemodialysis. (author)

  9. Evaluation of radiophoby phenomenon among patients undergoing radioisotope therapy

    International Nuclear Information System (INIS)

    Stepien, M.; Stepien, A.; Pawlus, J.; Wasilewska-Radwanska, M.

    2005-01-01

    The aim of study was to evaluate the radiophoby symptoms among 81 patients with different type hyperthyroidism undergoing 1-131 (450-600 MBq) treatment. The state anxiety as well as the trait anxiety levels using Spielberger's scale have been evaluated. Its values were 1 - 6 points (average 3) and 3 - 7 points (average 6) respectively for state anxiety and trait one. These results indicated that radioisotope therapy causes increase of patient's anxiety level. (author)

  10. Psychological determinants of life satisfaction in women undergoing infertility treatment

    OpenAIRE

    Aleksandra Anna Dembińska

    2016-01-01

    Background Infertility treatment is a long-term process, spread out over months, or even years, and carries no guarantee of success. It generates an incessant state of uncertainty which becomes a chronic state of psychological discomfort. Each stage of treatment may become a source of more trouble. Women deciding to undergo infertility treatment are exposed to many negative feelings concerning different aspects of their life. Participants and procedure The present study wa...

  11. Nursing Care of Patients Undergoing Chemotherapy Desensitization: Part II.

    Science.gov (United States)

    Jakel, Patricia; Carsten, Cynthia; Carino, Arvie; Braskett, Melinda

    2016-04-01

    Chemotherapy desensitization protocols are safe, but labor-intensive, processes that allow patients with cancer to receive medications even if they initially experienced severe hypersensitivity reactions. Part I of this column discussed the pathophysiology of hypersensitivity reactions and described the development of desensitization protocols in oncology settings. Part II incorporates the experiences of an academic medical center and provides a practical guide for the nursing care of patients undergoing chemotherapy desensitization.
.

  12. Development of the advanced on-line BWR core monitoring system TiARA

    International Nuclear Information System (INIS)

    Kobayashi, Yoko; Yamazaki, Hiroshi

    1996-01-01

    Development of an integrated computer environment to support plant operators and station nuclear engineers is a recent activity. In achieving this goal, an advanced on-line boiling water reactor (BWR) core monitoring system: TiARA has been developed by Toden Software. An integrated design approach was performed through the introduction of recent computer technologies, a sophisticated human/machine interface (HMI) and an advanced nodal method. The first prototype of TiARA was ready in early 1996. This prototype is now undergoing a field test at Kashiwazaki-Kariwa unit 6. After successful completion of this test, the authors will have achieved the following goals: (1) consistency between on-line core monitoring system and off-line core management system; (2) an enhanced HMI and database; (3) user-friendly operability and maintainability; (4) system development from the utilities' standpoint to fully satisfy operator needs

  13. The Interplay of Opacities and Rotation in Promoting the Explosion of Core-Collapse Supernovae

    Science.gov (United States)

    Vartanyan, David; Burrows, Adam; Radice, David

    2018-01-01

    For over five decades, the mechanism of explosion in core-collapse supernovae has been a central unsolved problem in astrophysics, challenging both our computational capabilities and our understanding of relevant physics. Current simulations often produce explosions, but they are at times underenergetic. The neutrino mechanism, wherein a fraction of emitted neutrinos is absorbed in the mantle of the star to reignite the stalled shock, remains the dominant model for reviving explosions in massive stars undergoing core collapse. We present here a diverse suite of 2D axisymmetric simulations produced by FORNAX, a highly parallelizable multidimensional supernova simulation code. We explore the effects of various corrections, including the many-body correction, to neutrino-matter opacities and the possible role of rotation in promoting explosion amongst various core-collapse progenitors.

  14. Study of the mechanism of clamping and detachment of a core sample by core lever lifters

    Energy Technology Data Exchange (ETDEWEB)

    Barabashkin, I I; Mizyakin, V M; Nikitin, S V

    1981-01-01

    Geometric dimensions of the basic elements of a core lifter should be determined depending on the clamping conditions. The changes should be determined depending on the conditions of the core sample diameter, critical angle between the lever and the core samples in the necessary depth of submersion of the contact edge of the lever into its surface. The core lifter KTsRZ-80 with eccentric core reception makes it possible to arrange more efficiently the core removing elements on the edge of the band. The use of the core lifters with eccentric plan of arrangement of the levers and their optimal length increases the removal of the core sample.

  15. Local anesthesia with ropivacaine for patients undergoing laparoscopic cholecystectomy

    Science.gov (United States)

    Liu, Yu-Yin; Yeh, Chun-Nan; Lee, Hsiang-Lin; Wang, Shang-Yu; Tsai, Chun-Yi; Lin, Chih-Chung; Chao, Tzu-Chieh; Yeh, Ta-Sen; Jan, Yi-Yin

    2009-01-01

    AIM: To investigate the effect of pain relief after infusion of ropivacaine at port sites at the end of surgery. METHODS: From October 2006 to September 2007, 72 patients undergoing laparoscopic cholecystectomy (LC) were randomized into two groups of 36 patients. One group received ropivacaine infusion at the port sites at the end of LC and the other received normal saline. A visual analog scale was used to assess postoperative pain when the patient awakened in the operating room, 6 and 24 h after surgery, and before discharge. The amount of analgesics use was also recorded. The demographics, laboratory data, hospital stay, and perioperative complications were compared between the two groups. RESULTS: There was no difference between the two groups preoperatively in terms of demographic and laboratory data. After surgery, similar operation time, blood loss, and no postoperative morbidity and mortality were observed in the two groups. However, a significantly lower pain score was observed in the patients undergoing LC with local anesthesia infusion at 1 h after LC and at discharge. Regarding analgesic use, the amount of meperidine used 1 h after LC and the total used during admission were lower in patients undergoing LC with local anesthesia infusion. This group also had a shorter hospital stay. CONCLUSION: Local anesthesia with ropivacaine at the port site in LC patients significantly decreased postoperative pain immediately. This explains the lower meperidine use and earlier discharge for these patients. PMID:19452582

  16. Predicting blood transfusion in patients undergoing minimally invasive oesophagectomy.

    Science.gov (United States)

    Schneider, Crispin; Boddy, Alex P; Fukuta, Junaid; Groom, William D; Streets, Christopher G

    2014-12-01

    To evaluate predictors of allogenic blood transfusion requirements in patients undergoing minimal invasive oesophagectomy at a tertiary high volume centre for oesophago-gastric surgery. Retrospective analysis of all patients undergoing minimal access oesophagectomy in our department between January 2010 and December 2011. Patients were divided into two groups depending on whether they required a blood transfusion at any time during their index admission. Factors that have been shown to influence perioperative blood transfusion requirements in major surgery were included in the analysis. Binary logistic regression analysis was performed to determine the impact of patient and perioperative characteristics on transfusion requirements during the index admission. A total of 80 patients underwent minimal access oesophagectomy, of which 61 patients had a laparoscopic assisted oesophagectomy and 19 patients had a minimal invasive oesophagectomy. Perioperative blood transfusion was required in 28 patients at any time during hospital admission. On binary logistic regression analysis, a lower preoperative haemoglobin concentration (p blood transfusion requirements. It has been reported that requirement for blood transfusion can affect long-term outcomes in oesophageal cancer resection. Two factors which could be addressed preoperatively; haemoglobin concentration and type of oesophageal resection, may be valuable in predicting blood transfusions in patients undergoing minimally invasive oesophagectomy. Our analysis revealed that preoperative haemoglobin concentration, occurrence of significant complications and type of minimal access oesophagectomy predicted blood transfusion requirements in the patient population examined. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

  17. Utility of an Australasian registry for children undergoing radiation treatment

    International Nuclear Information System (INIS)

    Ahern, Verity

    2014-01-01

    The aim of this study was to evaluate the utility of an Australasian registry ('the Registry') for children undergoing radiation treatment (RT). Children under the age of 16years who received a course of radiation between January 1997 and December 2010 and were enrolled on the Registry form the subjects of this study. A total of 2232 courses of RT were delivered, predominantly with radical intent (87%). Registrations fluctuated over time, but around one-half of children diagnosed with cancer undergo a course of RT. The most prevalent age range at time of RT was 10–15years, and the most common diagnoses were central nervous system tumours (34%) and acute lymphoblastic leukaemia (20%). The Registry provides a reflection of the patterns of care of children undergoing RT in Australia and a mechanism for determining the resources necessary to manage children by RT (human, facilities and emerging technologies, such as proton therapy). It lacks the detail to provide information on radiotherapy quality and disease outcomes which should be the subject of separate audit studies. The utility of the Registry has been hampered by its voluntary nature and varying needs for consent. Completion of registry forms is a logical requirement for inclusion in the definition of a subspecialist in paediatric radiation oncology.

  18. Carotid disease in diabetic patients undergoing coronary artery bypass grafting

    International Nuclear Information System (INIS)

    Shahid, M.; Abid, A.R.; Dar, M.A.; Noeman, A.; Amin, S.; Azhar, M.

    2012-01-01

    Objective: To compare the severity of carotid artery disease in diabetic and non-diabetic patients undergoing coronary artery bypass grafting. Methods: From January to June 2008, 379 patients undergoing elective coronary artery bypass surgery were preoperatively evaluated for the presence of carotid stenoses by duplex scanning. Patients were divided into two groups, Group I, 156 (41.2%) diabetic patients and Group II, 223 (58.8%) non-diabetic patients. Results: There were 314 (82.8%) males and 65 (17.2%) females with a mean age of 57.2+-9.1 years. In diabetic group there were 125 (80.1%) males and 31 (19.9%) females with a mean age of 56.3+-8.9 years. Left main stem stenosis was present in 59 (37.8%) diabetics and 45 (20.2%) non-diabetics (p 70% stenosis was present in 20 (5.3%) with 13 (8.3%) diabetics and 7 (3.1%) non-diabetics (p<0.025). Stenosis of 50-70% was observed in 30 (7.9%) of which 17 (10.9%) were diabetics and 13 (5.8%) were non-diabetics. Conclusion: Presence of diabetes mellitus is associated with diffuse coronary artery disease and significant carotid artery disease in patients undergoing coronary artery bypass grafting. (author)

  19. General Anaesthesia Protocols for Patients Undergoing Electroconvulsive Therapy

    Science.gov (United States)

    Narayanan, Aravind; Lal, Chandar; Al-Sinawi, Hamed

    2017-01-01

    Objectives This study aimed to review general anaesthesia protocols for patients undergoing electroconvulsive therapy (ECT) at a tertiary care hospital in Oman, particularly with regards to clinical profile, potential drug interactions and patient outcomes. Methods This retrospective study took place at the Sultan Qaboos University Hospital (SQUH), Muscat, Oman. The electronic medical records of patients undergoing ECT at SQUH between January 2010 and December 2014 were reviewed for demographic characteristics and therapy details. Results A total of 504 modified ECT sessions were performed on 57 patients during the study period. All of the patients underwent a uniform general anaesthetic regimen consisting of propofol and succinylcholine; however, they received different doses between sessions, as determined by the treating anaesthesiologist. Variations in drug doses between sessions in the same patient could not be attributed to any particular factor. Self-limiting tachycardia and hypertension were periprocedural complications noted among all patients. One patient developed aspiration pneumonitis (1.8%). Conclusion All patients undergoing ECT received a general anaesthetic regimen including propofol and succinylcholine. However, the interplay of anaesthetic drugs with ECT efficacy could not be established due to a lack of comprehensive data, particularly with respect to seizure duration. In addition, the impact of concurrent antipsychotic therapy on anaesthetic dose and subsequent complications could not be determined. PMID:28417028

  20. Clostridium difficile colitis in patients undergoing lumbar spine surgery.

    Science.gov (United States)

    Skovrlj, Branko; Guzman, Javier Z; Silvestre, Jason; Al Maaieh, Motasem; Qureshi, Sheeraz A

    2014-09-01

    Retrospective database analysis. To investigate incidence, comorbidities, and impact on health care resources of Clostridium difficile infection after lumbar spine surgery. C. difficile colitis is reportedly increasing in hospitalized patients and can have a negative impact on patient outcomes. No data exist on estimates of C. difficile infection rates and its consequences on patient outcomes and health care resources among patients undergoing lumbar spine surgery. The Nationwide Inpatient Sample was examined from 2002 to 2011. Patients were included for study based on International Classification of Diseases, Ninth Revision, Clinical Modification, procedural codes for lumbar spine surgery for degenerative diagnoses. Baseline patient characteristics were determined and multivariable analyses assessed factors associated with increased incidence of C. difficile and risk of mortality. The incidence of C. difficile infection in patients undergoing lumbar spine surgery is 0.11%. At baseline, patients infected with C. difficile were significantly older (65.4 yr vs. 58.9 yr, Pinfection. Small hospital size was associated with decreased odds (odds ratio [OR], 0.5; Pinfection. Uninsured (OR, 1.62; Pinfection. C. difficile increased hospital length of stay by 8 days (Pdifficile infection after lumbar spine surgery carries a 36.4-fold increase in mortality and costs approximately $10,658,646 per year to manage. These data suggest that great care should be taken to avoid C. difficile colitis in patients undergoing lumbar spine surgery because it is associated with longer hospital stays, greater overall costs, and increased inpatient mortality. 3.

  1. Stress modeling in colloidal dispersions undergoing non-viscometric flows

    Science.gov (United States)

    Dolata, Benjamin; Zia, Roseanna

    2017-11-01

    We present a theoretical study of the stress tensor for a colloidal dispersion undergoing non-viscometric flow. In such flows, the non-homogeneous suspension stress depends on not only the local average total stresslet-the sum of symmetric first moments of both the hydrodynamic traction and the interparticle force-but also on the average quadrupole, octupole, and higher-order moments. To compute the average moments, we formulate a six dimensional Smoluchowski equation governing the microstructural evolution of a suspension in an arbitrary fluid velocity field. Under the conditions of rheologically slow flow, where the Brownian relaxation of the particles is much faster than the spatiotemporal evolution of the flow, the Smoluchowski equation permits asymptotic solution, revealing a suspension stress that follows a second-order fluid constitutive model. We obtain a reciprocal theorem and utilize it to show that all constitutive parameters of the second-order fluid model may be obtained from two simpler linear-response problems: a suspension undergoing simple shear and a suspension undergoing isotropic expansion. The consequences of relaxing the assumption of rheologically slow flow, including the appearance of memory and microcontinuum behaviors, are discussed.

  2. Mortality Among Patients with Pleural Effusion Undergoing Thoracentesis

    Science.gov (United States)

    DeBiasi, Erin M.; Pisani, Margaret A.; Murphy, Terrence E.; Araujo, Katy; Kookoolis, Anna; Argento, A Christine; Puchalski, Jonathan

    2016-01-01

    Background Of the 1.5 million people diagnosed with pleural effusion annually in the U.S., approximately 178,000 undergo thoracentesis. While it is known that malignant pleural effusion portends a poor prognosis, mortality of patients with nonmalignant effusions has not been well studied. Methods This prospective cohort study evaluated 308 patients undergoing thoracentesis. Chart review was performed to obtain baseline characteristics. The etiology of the effusions was determined using standardized criteria. Mortality was determined at 30-days and 1-year. Results 247 unilateral and 61 bilateral thoracenteses were performed. Malignant effusion had the highest 30-day (37%) and 1 year (77%) mortality. There was substantial patient 30-day and 1-year mortality with effusions due to multiple benign etiologies (29% and 55%), CHF (22% and 53%), and renal failure (14% and 57%). Patients with bilateral pleural effusion, relative to unilateral, were associated with higher risk of death at 30 days and 1 year (17% versus 47%; HR 2.58 CI [1.44–4.63] and 36% versus 69%; HR 2.32 CI [1.55–3.48]). Conclusions Patients undergoing thoracentesis for pleural effusion have high short and long-term mortality. Patients with malignant effusion had the highest mortality followed by multiple benign etiologies, CHF and renal failure. Bilateral pleural effusion is distinctly associated with high mortality. PMID:25837039

  3. Investigating the translation of Earth's inner core

    DEFF Research Database (Denmark)

    Day, Elizabeth A; Cormier, Vernon F; Geballe, Zachary M

    2012-01-01

    The Earth’s inner core provides unique insights into processes that are occurring deep within our Earth today, as well as processes that occurred in the past. The seismic structure of the inner core is complex, and is dominated by anisotropic and isotropic differences between the Eastern...... for models of a translating inner core. Additionally, we investigate the structure at the base of the outer core and the inner core boundary by analyzing PKP-Cdiff waves. The search for observable PKP-Cdiff is particularly concentrated in regions that are predicted to be actively freezing and melting...... and Western ‘hemispheres’ of the inner core. Recent geodynamical models suggest that this hemispherical dichotomy can be explained by a fast translation of the inner core. In these models one side of the inner core is freezing, while the other side is melting, leading to the development of different seismic...

  4. Evaluation of core distortion in FBR

    International Nuclear Information System (INIS)

    Ikarimoto, I.; Tanaka, M.; Okubo, Y.

    1984-01-01

    The analyses of FBR's core distortion are mainly performed in order to evaluate the following items: 1) Change of reactivity; 2) Force at pads on core assemblies; 3) Withdrawal force at refueling; 4) Loading, refueling and residual deviations of wrapper tubes (core assemblies) at the top; 5) Bowing modes of guide tubes for control rods. The analysis of core distortion are performed by using computer program for two-dimensional row deformation analysis or three-dimensional core deformation if necessary, considering these evaluated items which become design conditions. This report shows the relationship between core deformation analysis and component design, a point of view of choosing an analysis program for design considering core characteristics, and computing examples of core deformation of prototype class reactor by the above code. (author)

  5. Device for removal of oriented core

    Energy Technology Data Exchange (ETDEWEB)

    Shakhmalov, A.M.

    1981-05-04

    A device for removal of an oriented core, which contains an external core barrel, connected with a gear, a rock-crushing bit, nonrotary core-receiving pipe, and a core marker, placed in the core-receiving pipe and connected kinematically with the external core barrel and gear, is distinguished by the fact that in order to increase the accuracy of determination of the spatial orientation of the core the gear of the core barrel and the marker come in the form of an electric drill, and a magnetic compass witha remote-fix indicator is attached to its housing. The device is also distinguished by the fact that it is equipped with an auxillary marker positioned symmetrically with respect to the first one.

  6. Design Principles for Synthesizable Processor Cores

    DEFF Research Database (Denmark)

    Schleuniger, Pascal; McKee, Sally A.; Karlsson, Sven

    2012-01-01

    As FPGAs get more competitive, synthesizable processor cores become an attractive choice for embedded computing. Currently popular commercial processor cores do not fully exploit current FPGA architectures. In this paper, we propose general design principles to increase instruction throughput...

  7. Review of the SIMMER-II analyses of liquid-metal-cooled fast breeder reactor core-disruptive accident fuel escape

    International Nuclear Information System (INIS)

    DeVault, G.P.; Bell, C.R.

    1985-01-01

    Early fuel removal from the active core of a liquid-metal-cooled fast breeder reactor undergoing a core-disruptive accident may reduce the potential for large energetics resulting from recriticalities. This paper presents a review of analyses with the SIMMER-II computer program of the effectiveness of possible fuel escape paths. Where possible, how SIMMER-II compares with or is validated against experiments that simulated the escape paths also is discussed

  8. Impact of multimodal preoperative preparation program on children undergoing surgery

    Directory of Open Access Journals (Sweden)

    Priya Reshma Aranha

    2017-01-01

    Full Text Available Background: The advanced era of technological development in child health care has resulted in more pediatric procedures being performed in various settings. Millions of children undergo surgery every year which is a stressful event. Many nonpharmacological strategies are being used to manage the preoperative fear and anxiety in children. The current study aims to assess the effectiveness of multimodal preoperative preparation program (MPPP on children undergoing surgery in terms of its effect on the psychophysiological parameters. Objective: The aim of this study is to assess the effectiveness of MPPP on the psychophysiological parameters of children undergoing surgery. Materials and Methods: A quasi-experimental study was conducted in a selected multi-specialty hospital. Using the purposive sampling technique, a total of 110 children aged 8–12 years were assigned to nonintervention (n = 55 and intervention (n = 55 groups, respectively. The MPPP was administered to the intervention group. The children in the nonintervention group received the routine preoperative care. Child's fear and anxiety was assessed on admission, prior to shifting the child to operation theater (OT, 24 and 48 h after surgery, whereas child's pulse, respiration, blood pressure (BP, and oxygen saturation was assessed on admission, prior to shifting the child to OT, 6, 12, 24, and 48 h after surgery and pain was assessed at 24 and 48 h after surgery. Results: The mean fear and anxiety scores of children were significantly lower in the intervention group than that of nonintervention group (P 0.05. This study also found that there is a significant association between the psychophysiological parameters of children with the selected demographic variables (P < 0.05. A positive correlation was found between the psychological and physiological parameters of children undergoing surgery. Conclusion: The MPPP is effective on psychophysiological parameters of children undergoing

  9. TMI-2 core bore acquisition summary report

    International Nuclear Information System (INIS)

    Tolman, E.L.; Smith, R.P.; Martin, M.R.; McCardell, R.K.; Broughton, J.M.

    1986-09-01

    Core bore samples were obtained from the severely damaged TMI-2 core during July and August, 1986. A description of the TMI-2 core bore drilling unit used to obtain samples; a summary and discussion of the data from the ten core bore segments which were obtained; and the initial results of analysis and evaluation of these data are presented in this report. The impact of the major findings relative to our understanding of the accident scenario is also discussed

  10. Core Processes: Earth's eccentric magnetic field

    DEFF Research Database (Denmark)

    Finlay, Chris

    2012-01-01

    Earth’s magnetic field is characterized by a puzzling hemispheric asymmetry. Calculations of core dynamo processes suggest that lopsided growth of the planet’s inner core may be part of the cause.......Earth’s magnetic field is characterized by a puzzling hemispheric asymmetry. Calculations of core dynamo processes suggest that lopsided growth of the planet’s inner core may be part of the cause....

  11. Core trénink ve florbale

    OpenAIRE

    Mašková, Alžběta

    2014-01-01

    Title: Use of core training in floorball Objectives: Present an overview of research papers regarding core training and its possible use in floorball Tasks: First aim of this thesis is to provide description and explanation of the core training by using available literature, research papers, bachelor or magister thesis and also thesis of the coaching school. Second aim is to analyze the necessary components of floorball player's performance relative to the core training. This is followed by a...

  12. Integration of Biosafety into Core Facility Management

    OpenAIRE

    Fontes, Benjamin

    2013-01-01

    This presentation will discuss the implementation of biosafety policies for small, medium and large core laboratories with primary shared objectives of ensuring the control of biohazards to protect core facility operators and assure conformity with applicable state and federal policies, standards and guidelines. Of paramount importance is the educational process to inform core laboratories of biosafety principles and policies and to illustrate the technology and process pathways of the core l...

  13. Temporal Change of Seismic Earth's Inner Core Phases: Inner Core Differential Rotation Or Temporal Change of Inner Core Surface?

    Science.gov (United States)

    Yao, J.; Tian, D.; Sun, L.; Wen, L.

    2017-12-01

    Since Song and Richards [1996] first reported seismic evidence for temporal change of PKIKP wave (a compressional wave refracted in the inner core) and proposed inner core differential rotation as its explanation, it has generated enormous interests in the scientific community and the public, and has motivated many studies on the implications of the inner core differential rotation. However, since Wen [2006] reported seismic evidence for temporal change of PKiKP wave (a compressional wave reflected from the inner core boundary) that requires temporal change of inner core surface, both interpretations for the temporal change of inner core phases have existed, i.e., inner core rotation and temporal change of inner core surface. In this study, we discuss the issue of the interpretation of the observed temporal changes of those inner core phases and conclude that inner core differential rotation is not only not required but also in contradiction with three lines of seismic evidence from global repeating earthquakes. Firstly, inner core differential rotation provides an implausible explanation for a disappearing inner core scatterer between a doublet in South Sandwich Islands (SSI), which is located to be beneath northern Brazil based on PKIKP and PKiKP coda waves of the earlier event of the doublet. Secondly, temporal change of PKIKP and its coda waves among a cluster in SSI is inconsistent with the interpretation of inner core differential rotation, with one set of the data requiring inner core rotation and the other requiring non-rotation. Thirdly, it's not reasonable to invoke inner core differential rotation to explain travel time change of PKiKP waves in a very small time scale (several months), which is observed for repeating earthquakes in Middle America subduction zone. On the other hand, temporal change of inner core surface could provide a consistent explanation for all the observed temporal changes of PKIKP and PKiKP and their coda waves. We conclude that

  14. Common Core: Teaching Optimum Topic Exploration (TOTE)

    Science.gov (United States)

    Karge, Belinda Dunnick; Moore, Roxane Kushner

    2015-01-01

    The Common Core has become a household term and yet many educators do not understand what it means. This article explains the historical perspectives of the Common Core and gives guidance to teachers in application of Teaching Optimum Topic Exploration (TOTE) necessary for full implementation of the Common Core State Standards. An effective…

  15. The core health science library in Canada.

    Science.gov (United States)

    Huntley, J L

    1974-04-01

    Core lists in Canada are characterized by regional differences. The lists of current importance are: (1) the British Columbia acquisitions guide for hospital libraries, (2) three Saskatchewan lists for hospitals of different sizes, (3) a core list recommended for Ontario hospitals, (4) Quebec core lists, including French language lists.

  16. Improving Core Strength to Prevent Injury

    Science.gov (United States)

    Oliver, Gretchen D.; Adams-Blair, Heather R.

    2010-01-01

    Regardless of the sport or skill, it is essential to have correct biomechanical positioning, or postural control, in order to maximize energy transfer. Correct postural control requires a strong, stable core. A strong and stable core allows one to transfer energy effectively as well as reduce undue stress. An unstable or weak core, on the other…

  17. Simplifying the ELA Common Core; Demystifying Curriculum

    Science.gov (United States)

    Schmoker, Mike; Jago, Carol

    2013-01-01

    The English Language Arts (ELA) Common Core State Standards ([CCSS], 2010) could have a transformational effect on American education. Though the process seems daunting, one can begin immediately integrating the essence of the ELA Common Core in every subject area. This article shows how one could implement the Common Core and create coherent,…

  18. Ubuntu Core Snaps for Science

    Science.gov (United States)

    Wyngaard, J.

    2017-12-01

    A key challenge in the burgeoning sector of IoT (Internet of Things) is ensuring device and communication security. Ubuntu Core's approach to this is the use of 'snaps'. Along side this growth, scientists are increasingly utilising the many new low cost sensors now available. This work prototypes the use of snaps as a possible avenue to reducing the barrier to entry for scientific use of these low cost sensors while also ensuring proper meta-data is captured. Snaps are contained applications that have been signed. This means that a snap application is unable to read or write to any area of the system beyond its assigned reach, thereby significantly limiting the possible impact of any break in security higher up the stack. Further, application and system updates are automatically verified as authentic before being applied. Additionally, on an embedded system running Ubuntu Core the hardware interface (Gadget), kernel, and OS (Core) are all also snaps and therefore also have acquired these same gains. The result is an architecture that enables: (1) Secure, robust, remote automatic updates of both the OS and applications. (2) A user friendly deployment mechanism.(3) A easy to maintain means of supporting multiple platforms. The above is primarily targeted at non-academic domains, however, it is proposed that the Scientific community can benefit from it too. This work therefore prototypes a snap for sensors on board a small Unmanned Aircraft System (sUAS). For demonstration purposes this snap specifically targets connecting a popular low cost CO2 meter to a Raspberry Pi3 and the popular open source sUAS autopilot Arducopter.

  19. Droplet generation during core reflood

    International Nuclear Information System (INIS)

    Kocamustafaogullari, G.; De Jarlais, G.; Ishii, M.

    1983-01-01

    The process of entrainment and disintegration of liquid droplets by a flow of steam has considerable practical importance in calculating the effectivenes of the emergency core cooling system. Liquid entrainment is also important in determination of the critical heat flux point in general. Thus the analysis of the reflooding phase of a LOCA requires detailed knowledge of droplet size. Droplet size is mainly determined by the droplet generation mechanisms involved. To study these mechanisms, data generated in the PWR FLECHT SEASET series of experiments was analyzed. In addition, an experiment was performed in which the hydrodynamics of low quality post-CHF flow (inverted annular flow) were simulated in an adiabatic test section

  20. Reactor core simulations in Canada

    International Nuclear Information System (INIS)

    Roy, R.; Koclas, J.; Shen, W.; Jenkins, D. A.; Altiparmakov, D.; Rouben, B.

    2004-01-01

    This review will address the current simulation flow-chart currently used for reactor-physics simulations in the Canadian industry. The neutron behaviour in heavy-water moderated power reactors is quite different from that in other power reactors, thus the core physics approximations are somewhat different Some codes used are particular to the context of heavy-water reactors, and the paper focuses on this aspect. The paper also shows simulations involving new design features of the Advanced Candu Reactor TM (ACR TM), and provides insight into future development, expected in the coming years. (authors)

  1. WWER-440 type reactor core

    International Nuclear Information System (INIS)

    Mizov, J.; Svec, P.; Rajci, T.

    1987-01-01

    Assemblies with patly spent fuel of enrichment within 5 and 36 MWd/kg U or lower than the maximum enrichment of freshly charged fuel are placed in at least one of the peripheral positions of each hexagonal sector of the WWER-440 reactor type core. This increases fuel availability and reduces the integral neutron dose to the reactor vessel. The duration is extended of the reactor campaign and/or the mean fuel enrichment necessary for the required duration of the period between refuellings is reduced. Thus, fuel costs are reduced by 1 up to 3%. The results obtained in the experiment are tabulated. (J.B.). 1 fig., 3 tabs

  2. LWR-core behaviour project

    International Nuclear Information System (INIS)

    Paratte, J.M.

    1982-07-01

    The LWR-Core behaviour project concerns the mathematical simulation of a light water reactor in normal operation (emergency situations excluded). Computational tools are assembled, i.e. programs and libraries of data. These computational tools can likewise be used in nuclear power applications, industry and control applications. The project is divided into three parts: the development and application of calculation methods for quantisation determination of LWR physics; investigation of the behaviour of nuclear fuels under radiation with special attention to higher burnup; simulation of the operating transients of nuclear power stations. (A.N.K.)

  3. Degraded core studies at INEL

    International Nuclear Information System (INIS)

    Buescher, B.J.; Howe, T.M.; Miller, R.W.

    1982-01-01

    During 1980, planning of prototypical severe fuel damage tests to be conducted in the Power Burst Facility (PBF) to investigate fuel behavior in severe accidents up to temperatures of 2400 0 K was initiated. This first series of tests is designated Phase I. Also, a code development effort was initiated to provide a reliable predictive tool for core behavior during severe accidents. During 1981, an assessment of capabilities and preliminary planning were begun for an in-pile experimental program to investigate the behavior of larger arrays of previously irradiated fuel rods at temperatures through UO 2 melting. This latter series of tests is designated Phase II

  4. Core construction for nuclear reactors

    International Nuclear Information System (INIS)

    Pettinger, D.S.

    1977-01-01

    HTR core construction with prismatic graphite blocks piled into columns. The front of the blocks is concavely curved. The lines of contact of two blocks are always not vertical, i.e. the blocks of one column are supported by the blocks of neighbouring columns so that ducts are formed. Groups of three or four of these columns may additionally be arranged around a central column which has recesses in order to lock the blocks of one group together. With this arrangement, dimensional changes of the graphite blocks under operating conditions can be taken up. (DG) [de

  5. TMI-2 Core Shipping Preparations

    International Nuclear Information System (INIS)

    Ball, L.J.; Barkanic, R.J.; Conaway, W.T. II; Schmoker, D. S.; Post, Roy G.

    1988-01-01

    Shipping the damaged core from the Unit 2 reactor of Three Mile Island Nuclear Power Station near Harrisburg, PA, to the Idaho National Engineering Laboratory near Idaho Falls, ID, required development and implementation of a completely new spent fuel transportation system. This paper describes of the equipment developed, the planning and activities used to implement the hard-ware-systems into the facilities, and the planning involved in making the rail shipments. It also includes a summary of recommendations resulting from this experience. (author)

  6. 77 FR 72867 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2012-12-06

    ... cancer, diabetes, and access to health care. It is a leading source of data for the Congressionally... adult) 44,000 1 15/60 Child Core (adult family member) 17,000 1 10/60 Child/Teen Record Check (medical...

  7. 78 FR 75920 - Agency Forms Undergoing Paperwork Reduction Act Review

    Science.gov (United States)

    2013-12-13

    ... using computer assisted personal interviews (CAPI). A core set of data is collected each year that... should be received within 30 days of this notice. Proposed Project The National Health Interview Survey... National Health Interview Survey is a major source of general statistics on the health of the U.S...

  8. Hydrophilic-Core Microcapsules and Their Formation

    Science.gov (United States)

    Calle, Luz M. (Inventor); Li, Wenyan (Inventor); Buhrow, Jerry W. (Inventor); Jolley, Scott T. (Inventor)

    2016-01-01

    Hydrophilic-core microcapsules and methods of their formation are provided. A hydrophilic-core microcapsule may include a shell that encapsulates water with the core substance dissolved or dispersed therein. The hydrophilic-core microcapsules may be formed from an emulsion having hydrophilic-phase droplets dispersed in a hydrophobic phase, with shell-forming compound contained in the hydrophilic phase or the hydrophobic phase and the core substance contained in the hydrophilic phase. The shells of the microcapsules may be capable of being broken down in response to being contacted by an alkali, e.g., produced during corrosion, contacting the shell.

  9. Nitride stabilized core/shell nanoparticles

    Science.gov (United States)

    Kuttiyiel, Kurian Abraham; Sasaki, Kotaro; Adzic, Radoslav R.

    2018-01-30

    Nitride stabilized metal nanoparticles and methods for their manufacture are disclosed. In one embodiment the metal nanoparticles have a continuous and nonporous noble metal shell with a nitride-stabilized non-noble metal core. The nitride-stabilized core provides a stabilizing effect under high oxidizing conditions suppressing the noble metal dissolution during potential cycling. The nitride stabilized nanoparticles may be fabricated by a process in which a core is coated with a shell layer that encapsulates the entire core. Introduction of nitrogen into the core by annealing produces metal nitride(s) that are less susceptible to dissolution during potential cycling under high oxidizing conditions.

  10. Hydrophobic-Core Microcapsules and Their Formation

    Science.gov (United States)

    Calle, Luz M. (Inventor); Li, Wenyan (Inventor); Buhrow, Jerry W. (Inventor); Jolley, Scott T. (Inventor)

    2016-01-01

    Hydrophobic-core microcapsules and methods of their formation are provided. A hydrophobic-core microcapsule may include a shell that encapsulates a hydrophobic substance with a core substance, such as dye, corrosion indicator, corrosion inhibitor, and/or healing agent, dissolved or dispersed therein. The hydrophobic-core microcapsules may be formed from an emulsion having hydrophobic-phase droplets, e.g., containing the core substance and shell-forming compound, dispersed in a hydrophilic phase. The shells of the microcapsules may be capable of being broken down in response to being contacted by an alkali, e.g., produced during corrosion, contacting the shell.

  11. Development of coring, consolidating, subterrene penetrators

    International Nuclear Information System (INIS)

    Murphy, H.D.; Neudecker, J.W.; Cort, G.E.; Turner, W.C.; McFarland, R.D.; Griggs, J.E.

    1976-02-01

    Coring penetrators offer two advantages over full face-melting penetrators, i.e., formation of larger boreholes with no increase in power and the production of glass-lined, structurally undisturbed cores which can be recovered with conventional core-retrieval systems. These cores are of significant value in geological exploratory drilling programs. The initial design details and fabrication features of a 114-mm-diam coring penetrator are discussed; significant factors for design optimization are also presented. Results of laboratory testing are reported and compared with performance predictions, and an initial field trial is described

  12. Design configuration of GCFR core assemblies

    International Nuclear Information System (INIS)

    LaBar, M.P.; Lee, G.E.; Meyer, R.J.

    1980-05-01

    The current design configurations of the core assemblies for the gas-cooled fast reactor (GCFR) demonstration plant reactor core conceptual design are described. Primary emphasis is placed upon the design innovations that have been incorporated in the design of the core assemblies since the establishment of the initial design of an upflow GCFR core. A major feature of the design configurations is that they are prototypical of core assemblies for use in commercial plants; a larger number of the same assemblies would be used in a commercial plant

  13. Rapidly changing flows in the Earth's core

    DEFF Research Database (Denmark)

    Olsen, Nils; Mandea, M.

    2008-01-01

    A large part of the Earth's magnetic field is generated by fluid motion in the molten outer core(1). As a result of continuous satellite measurements since 1999, the core magnetic field and its recent variations can now be described with a high resolution in space and time(2). These data have...... field occurring over only a few months, indicative of fluid flow at the top of the core, can in fact be resolved. Using nine years of magnetic field data obtained by satellites as well as Earth-based observatories, we determine the temporal changes in the core magnetic field and flow in the core. We...

  14. Double U-Core Switched Reluctance Machine

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention relates to an electrical machine stator comprising a plurality of stator segments (131,132,133), each segment comprises a first U-core and a second U-core wound with a winding, where the winding being arranged with at least one coil turn, each coil turn comprises a first axial......(s), wherein the first U-core and the second U-core are located adjacent to each other, whereby the winding spans the first and second U-cores. The invention also relates to a SRM machine with a stator mentioned above and a rotor....

  15. Test model of WWER core

    International Nuclear Information System (INIS)

    Tikhomirov, A. V.; Gorokhov, A. K.

    2007-01-01

    The objective of this paper is creation of precision test model for WWER RP neutron-physics calculations. The model is considered as a tool for verification of deterministic computer codes that enables to reduce conservatism of design calculations and enhance WWER RP competitiveness. Precision calculations were performed using code MCNP5/1/ (Monte Carlo method). Engineering computer package Sapfir 9 5andRC V VER/2/ is used in comparative analysis of the results, it was certified for design calculations of WWER RU neutron-physics characteristic. The object of simulation is the first fuel loading of Volgodon NPP RP. Peculiarities of transition in calculation using MCNP5 from 2D geometry to 3D geometry are shown on the full-scale model. All core components as well as radial and face reflectors, automatic regulation in control and protection system control rod are represented in detail description according to the design. The first stage of application of the model is assessment of accuracy of calculation of the core power. At the second stage control and protection system control rod worth was assessed. Full scale RP representation in calculation using code MCNP5 is time consuming that calls for parallelization of computational problem on multiprocessing computer (Authors)

  16. Fast reactor core monitoring device

    International Nuclear Information System (INIS)

    Sanda, Toshio; Inoue, Kotaro; Azekura, Kazuo.

    1982-01-01

    Purpose: To enable the rapid and accurate on-line identification of the state of a fast reactor core by effectively utilizing the measured data on the temperature and flow rate of the coolant. Constitution: The spacial power distribution and average assembly power are quickly calculated using an approximate calculating method, the measured values and the calculated values of the inlet and outlet temperature difference, flow rate and coolant physical values of an assembly are combined and are individually obtained, the most definite respective values and their errors are obtained by a least square method utilizing a formula of the relation between these values, and the power distribution and the temperature distribution of a reactor core are estimated in this manner. Accordingly, even when the measuring accuracy and the calculating accuracy are equal as in a fast reactor, the power distribution and the temperature distribution can be accurately estimated on-line at a high speed in a nuclear reactor, information required for the operator is provided, and the reactor can thus be safely and efficiently operated. (Yoshihara, H.)

  17. Materials behaviour in PWRs core

    International Nuclear Information System (INIS)

    Barbu, A.; Massoud, J.P.

    2008-01-01

    Like in any industrial facility, the materials of PWR reactors are submitted to mechanical, thermal or chemical stresses during particularly long durations of operation: 40 years, and even 60 years. Materials closer to the nuclear fuel are submitted to intense bombardment of particles (mainly neutrons) coming from the nuclear reactions inside the core. In such conditions, the damages can be numerous and various: irradiation aging, thermal aging, friction wear, generalized corrosion, stress corrosion etc.. The understanding of the materials behaviour inside the cores of reactors in operation is a major concern for the nuclear industry and its long term forecast is a necessity. This article describes the main ways of materials degradation without and under irradiation, with the means used to foresee their behaviour using physics-based models. Content: 1 - structures, components and materials: structure materials, nuclear materials; 2 - main ways of degradation without irradiation: thermal aging, stress corrosion, wear; 3 - main ways of degradation under irradiation: microscopic damaging - point defects, dimensional alterations, evolution of mechanical characteristics under irradiation, irradiation-assisted stress corrosion cracking (IASCC), synergies; 4 - forecast of materials evolution under irradiation using physics-based models: primary damage - fast dynamics, primary damage annealing - slow kinetics microstructural evolution, impact of microstructural changes on the macroscopic behaviour, insight on modeling methods; 5 - materials change characterization techniques: microscopic techniques - direct defects observation, nuclear techniques using a particle beam, global measurements, mechanical characterizations; 6 - perspectives. (J.S.)

  18. Research on plasma core reactors

    International Nuclear Information System (INIS)

    Jarvis, G.A.; Barton, D.M.; Helmick, H.H.; Bernard, W.; White, R.H.

    1977-01-01

    Experiments and theoretical studies are being conducted for NASA on critical assemblies with 1-m-diam by 1-m-long low-density cores surrounded by a thick beryllium reflector. These assemblies make extensive use of existing nuclear propulsion reactor components, facilities, and instrumentation. Due to excessive porosity in the reflector, the initial critical mass was 19 kg U(93.2). Addition of a 17-cm-thick by 89-cm-diam beryllium flux trap in the cavity reduced the critical mass to 7 kg when all the uranium was in the zone just outside the flux trap. A mockup aluminum UF 6 container was placed inside the flux trap and fueled with uranium-graphite elements. Fission distributions and reactivity worths of fuel and structural materials were measured. Finally, an 85,000-cm 3 aluminum canister in the central region was fueled with UF 6 gas and fission density distributions determined. These results will be used to guide the design of a prototype plasma core reactor which will test energy removal by optical radiation

  19. 78 FR 56174 - In-Core Thermocouples at Different Elevations and Radial Positions in Reactor Core

    Science.gov (United States)

    2013-09-12

    ... 52 [Docket No. PRM-50-105; NRC-2012-0056] In-Core Thermocouples at Different Elevations and Radial Positions in Reactor Core AGENCY: Nuclear Regulatory Commission. ACTION: Petition for rulemaking; denial...-core thermocouples at different elevations and radial positions throughout the reactor core to enable...

  20. Drilling history core hole DC-8

    International Nuclear Information System (INIS)

    1978-10-01

    Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored

  1. Drilling history core hole DC-8

    Energy Technology Data Exchange (ETDEWEB)

    1978-10-01

    Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored.

  2. Method for orienting a borehole core

    International Nuclear Information System (INIS)

    Henry, W.

    1980-01-01

    A method is described for longitudinally orienting a borehold core with respect to the longitudinal axis of the drill string which drilled said borehold core in such a manner that the original longitudinal attitude of said borehold core within the earth may be determined. At least a portion of said borehold core is partialy demagnetized in steps to thereby at least partially remove in steps the artificial remanent magnetism imparted to said borehole core by said drill string. The artifical remanent magnetism is oriented substantially parallel to the longitudinal axis of said drill string. The direction and intensity of the total magnetism of said borehold core is measured at desired intervals during the partial demagnetizing procedure. An artificial remanent magnetism vector is established which extends from the final measurement of the direction and intensity of the total magnetism of said borehole core taken during said partial demagnetizing procedure towards the initial measurement of the direction and intensity of the total magnetism of said borehold core taken during said partial demagnetizing procedure. The borehold core is oriented in such a manner that said artificial remanent magnetism vector points at least substantially downwardly towards the bottom of said borehold core for a borehold in the northern hemisphere and points at least substantailly upwardly towards the top of said borehole core for a borehole in the southern hemisphere

  3. JOYO MK-II core characteristics database

    International Nuclear Information System (INIS)

    Tabuchi, Shiro; Aoyama, Takafumi; Nagasaki, Hideaki; Kato, Yuichi

    1998-12-01

    The experimental fast reactor JOYO served as the MK-II irradiation bed core for testing fuel and material for FBR development for 15 years from 1982 to 1997. During the MK-II operation, extensive data were accumulated from the core characteristics tests conducted in thirty-one duty operations and thirteen special test operations. These core management data and core characteristics data were compiled into a database. The code system MAGI has been developed and used for core management of JOYO MK-II, and the core characteristics and the irradiation test conditions were calculated using MAGI on the basis of three dimensional diffusion theory with seven neutron energy groups. The core management data include extensive data, which were recorded on CD-ROM for user convenience. The data are specifications and configurations of the core, and for about 300 driver fuel subassemblies and about 60 uninstrumented irradiation subassemblies are core composition before and after irradiation, neutron flux, neutron fluences, fuel and control rod burn-up, and temperature and power distributions. MK-II core characteristics and test conditions were stored in the database for post analysis. Core characteristics data include excess reactivities, control rod worths, and reactivity coefficients, e.g., temperature, power and burn-up. Test conditions include both measured and calculated data for irradiation conditions. (author)

  4. Sampling of sediment cores; Muestreo de cores sedimentarios

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz-Fernandez, Ana Carolina [Universidad Nacional Autonoma de Mexico, Instituto de Ciencias del Mar y Limnologia (Mexico); Diaz Asencio, Misael [Centro de Estudios Ambientales de Cienfuegos (Cuba)

    2012-07-01

    In this chapter we describe techniques for collecting sediment cores for obtaining geochronologies by {sup 210}Pb (100 years) to allow historical reconstruction of environmental changes in the coastal zone. We examine relevant aspects for the sampling design, mainly related to the basic information about the area of interest necessary to choose the perfect place sampling, thereby we can improve the chances of success in meeting the objectives of the study. We also include description of the sampling methods aimed at maximizing the collecting capabilities of undisturbed sedimentary material, emphasizing the recovery of unaltered sediment-water interface. In addition, we describe subsampling procedures and sample handling intended to minimize post-sampling disruption to improve the possibilities of a reconstruction of reliable geochronologies. [Spanish] En este capitulo describimos tecnicas de recogida de cores sedimentarios para la obtencion de geocronologias por {sup 210}Pb (100 anos) que permitan la reconstruccion historica de cambios ambientales en la zona costera. Examinamos los aspectos relevantes para el diseno del muestreo, principalmente relacionados con la informacion basica sobre el area de interes necesaria para escoger el lugar idoneo de muestreo. De ese modo podemos mejorar las posibilidades de exito en el cumplimiento de los objetivos del estudio. Incluimos ademas la descripcion de los metodos de muestreo orientados a maximizar las posibilidades de recogida de material sedimentario no perturbado, poniendo enfasis en la recuperacion inalterada de la interfase agua-sedimento. Asimismo, describimos procedimientos de submuestreo y manipulacion de muestras, con los cuales se pretende minimizar la perturbacion post-muestreo para mejorar las posibilidades de una reconstruccion de geocronologias confiables.

  5. Religiousness, religious coping with illness, and psychological function among Polish elderly patients with osteoarthritis undergoing arthroplasty.

    Science.gov (United States)

    Stecz, Patryk; Kocur, Józef

    2015-04-01

    To determine the influence of religious coping and religiousness on the psychological functioning of Polish patients before and after arthroplasty, a prospective study was performed. Out of a pool of 102 potential participants, a total of 61 (34 females, 27 males) completed a purposely created survey, Brief-COPE followed by preoperative and postoperative Perceived Stress Scale, State Trait Anxiety Inventory and Satisfaction with Life Scale. Religious coping was not associated with: (1) perceived stress before or after surgery; (2) preoperative or postoperative anxiety; (3) life satisfaction. A two-factor ANOVA has shown that religious coping controlled by religiousness was related to better psychological functioning. Between- and within-subjects effects were observed for improvement in life satisfaction measured by split-plot ANOVA, which suggests (p religious orientation. We concluded that religious strategies in dealing with stress measured by Brief-COPE were least likely to benefit patients of low-religious orientation. The study demonstrated the importance of core religious beliefs in predicting benefits derived from religiousness in the face of a crisis. This study showed that regardless of its effectiveness, turning to religion is common among Polish patients about to undergo surgery for osteoarthritis of the hip.

  6. Perioperative Search for Circulating Tumor Cells in Patients Undergoing Prostate Brachytherapy for Clinically Nonmetastatic Prostate Cancer

    Directory of Open Access Journals (Sweden)

    Hideyasu Tsumura

    2017-01-01

    Full Text Available Despite the absence of local prostate cancer recurrence, some patients develop distant metastases after prostate brachytherapy. We evaluate whether prostate brachytherapy procedures have a potential risk for hematogenous spillage of prostate cancer cells. Fifty-nine patients who were undergoing high-dose-rate (HDR or low-dose-rate (LDR brachytherapy participated in this prospective study. Thirty patients with high-risk or locally advanced cancer were treated with HDR brachytherapy after neoadjuvant androgen deprivation therapy (ADT. Twenty-nine patients with clinically localized cancer were treated with LDR brachytherapy without neoadjuvant ADT. Samples of peripheral blood were drawn in the operating room before insertion of needles (preoperative and again immediately after the surgical manipulation (intraoperative. Blood samples of 7.5 mL were analyzed for circulating tumor cells (CTCs using the CellSearch System. While no preoperative samples showed CTCs (0%, they were detected in intraoperative samples in 7 of the 59 patients (11.8%; preoperative vs. intraoperative, p = 0.012. Positive CTC status did not correlate with perioperative variables, including prostate-specific antigen (PSA at diagnosis, use of neoadjuvant ADT, type of brachytherapy, Gleason score, and biopsy positive core rate. We detected CTCs from samples immediately after the surgical manipulation. Further study is needed to evaluate whether those CTCs actually can survive and proliferate at distant sites.

  7. A standardized multidisciplinary approach reduces the use of allogeneic blood products in patients undergoing cardiac surgery.

    Science.gov (United States)

    Van der Linden, P; De Hert, S; Daper, A; Trenchant, A; Jacobs, D; De Boelpaepe, C; Kimbimbi, P; Defrance, P; Simoens, G

    2001-10-01

    Individual and institutional practices remain an independent predictor factor for allogeneic blood transfusion. Application of a standardized multidisciplinary transfusion strategy should reduce the use of allogeneic blood transfusion in major surgical patients. This prospective non randomized observational study evaluated the effects of a standardized multidisciplinary transfusion strategy on allogeneic blood products exposure in patients undergoing non-emergent cardiac surgery. The developed strategy involved a standardized blood conservation program and a multidisciplinary allogeneic blood transfusion policy based mainly on clinical judgement, not only on a specific hemoglobin concentration. Data obtained in a first group including patients operated from September 1997 to August 1998 (Group pre: n=321), when the transfusion strategy was progressively developed, were compared to those obtained in a second group, including patients operated from September 1998 to August 1999 (Group post: n=315) when the transfusion strategy was applied uniformly. Patient populations and surgical procedures were similar. Patients in Group post underwent acute normovolemic hemodilution more frequently, had a higher core temperature at arrival in the intensive care unit and presented lower postoperative blood losses at day one. Three hundred forty units of packed red blood cells were transfused in 33% of the patients in Group pre whereas 161 units were transfused in 18% of the patients in Group post (P <0.001). Pre- and postoperative hemoglobin concentrations, mortality and morbidity were not different among groups. Development of a standardized multidisciplinary transfusion strategy markedly reduced the exposure of cardiac surgery patients to allogeneic blood.

  8. SCTF Core-I test results

    International Nuclear Information System (INIS)

    Adachi, Hiromichi; Sudo, Yukio; Iwamura, Takamichi; Osakabe, Masahiro; Ohnuki, Akira; Hirano, Kemmei

    1982-07-01

    The Slab Core Test Facility (SCTF) of Japan Atomic Energy Research Institute (JAERI) was constructed to investigate two-dimensional thermohydrodynamics in the core and the communication in fluid behavior between the core and the upper plenum during the last part of blowdown, refill and reflood phases of a posturated loss-of-coolant accident (LOCA) of a pressurized water reactor (PWR). In the present report, effects of system pressure on reflooding phenomena shall be discussed based on the data of Tests S1-SH2, S1-01 and S1-02 which are the parameteris tests for system pressure effects belonging to the SCTF Core-I forced flooding test series. Major items discussed in this report are (1) hydrodynamic behavior in the system, (2) core thermal behavior, (3) core heat transfer and (4) two-dimensional hydrodynamic behavior in the pressure vessel including the core. (author)

  9. Reactor-core-reactivity control device

    International Nuclear Information System (INIS)

    Miura, Teruo; Sakuranaga, Tomonobu.

    1983-01-01

    Purpose: To improve the reactor safety upon failures of control rod drives by adapting a control rod not to drop out accidentally from the reactor core but be inserted into the reactor core. Constitution: The control rod is entered or extracted as usual from the bottom of the pressure vessel. A space is provided above the reactor core within the pressure vessel, in which the moving scope of the control rod is set between the space above the reactor core and the reactor core. That is, the control rod is situated above the reactor core upon extraction thereof and, if an accident occurs to the control rod drive mechanisms to detach the control rod and the driving rod, the control rod falls gravitationally into the reactor core to improve the reactor safety. In addition, since the speed limiter is no more required to the control rod, the driving force can be decreased to reduce the size of the rod drive mechanisms. (Ikeda, J.)

  10. Tranexamic Acid in Patients Undergoing Coronary-Artery Surgery.

    Science.gov (United States)

    Myles, Paul S; Smith, Julian A; Forbes, Andrew; Silbert, Brendan; Jayarajah, Mohandas; Painter, Thomas; Cooper, D James; Marasco, Silvana; McNeil, John; Bussières, Jean S; McGuinness, Shay; Byrne, Kelly; Chan, Matthew T V; Landoni, Giovanni; Wallace, Sophie

    2017-01-12

    Tranexamic acid reduces the risk of bleeding among patients undergoing cardiac surgery, but it is unclear whether this leads to improved outcomes. Furthermore, there are concerns that tranexamic acid may have prothrombotic and proconvulsant effects. In a trial with a 2-by-2 factorial design, we randomly assigned patients who were scheduled to undergo coronary-artery surgery and were at risk for perioperative complications to receive aspirin or placebo and tranexamic acid or placebo. The results of the tranexamic acid comparison are reported here. The primary outcome was a composite of death and thrombotic complications (nonfatal myocardial infarction, stroke, pulmonary embolism, renal failure, or bowel infarction) within 30 days after surgery. Of the 4662 patients who were enrolled and provided consent, 4631 underwent surgery and had available outcomes data; 2311 were assigned to the tranexamic acid group and 2320 to the placebo group. A primary outcome event occurred in 386 patients (16.7%) in the tranexamic acid group and in 420 patients (18.1%) in the placebo group (relative risk, 0.92; 95% confidence interval, 0.81 to 1.05; P=0.22). The total number of units of blood products that were transfused during hospitalization was 4331 in the tranexamic acid group and 7994 in the placebo group (Ptranexamic acid group and in 2.8% of the patients in the placebo group (P=0.001), and seizures occurred in 0.7% and 0.1%, respectively (P=0.002 by Fisher's exact test). Among patients undergoing coronary-artery surgery, tranexamic acid was associated with a lower risk of bleeding than was placebo, without a higher risk of death or thrombotic complications within 30 days after surgery. Tranexamic acid was associated with a higher risk of postoperative seizures. (Funded by the Australian National Health and Medical Research Council and others; ATACAS Australia New Zealand Clinical Trials Registry number, ACTRN12605000557639 .).

  11. [The health of adults undergoing an eviction process].

    Science.gov (United States)

    Bolívar Muñoz, Julia; Bernal Solano, Mariola; Mateo Rodríguez, Inmaculada; Daponte Codina, Antonio; Escudero Espinosa, Cecilia; Sánchez Cantalejo, Carmen; González Usera, Isis; Robles Ortega, Humbelina; Mata Martín, José Luis; Fernández Santaella, M Carmen; Vila Castellar, Jaime

    2016-01-01

    To analyze perceived health status and other health-related indicators in the adult population in Granada (Spain) undergoing an eviction process from their homes, whether rented or owned, in comparison with health indicators in the general adult population in Andalusia. A cross-sectional survey was administered by trained staff. The survey included instruments from the Andalusian Health Survey 2011 for measuring variables related to physical and mental health, as well as health-related habits. We compared the results with those obtained from the Andalusian general population through the Andalusian Health Survey. A bivariate analysis using the χ2 test and a multivariate logistic regression analysis were conducted. We obtained a total sample of 205 people in the process of eviction. A total of 59.5% (n=122) were women, and 40.5% (n=83) were men. Participants were more likely to have poor health (odds ratio [OR]: 12.63, 95% confidence interval [95%CI]: 8.74-18.27), have cardiovascular diseases (OR: 3.08; 95%CI: 1.54- 6.16), or to smoke (OR: 1.68; 95% CI: 1.21-2.33) compared with the Andalusian general population. Most of the health indicators analyzed showed a worse outcome for women undergoing an eviction process. Our results suggest that, in the current context of economic crisis, people undergoing a process of eviction in Granada and its metropolitan area show poorer health than the Andalusian general population. Further research is needed on health and evictions from different methodological approaches, for a better understanding of the topic. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

  12. Oral Triiodothyronine for Infants and Children Undergoing Cardiopulmonary Bypass.

    Science.gov (United States)

    Marwali, Eva M; Boom, Cindy E; Budiwardhana, Novik; Fakhri, Dicky; Roebiono, Poppy S; Santoso, Anwar; Sastroasmoro, Sudigdo; Slee, April; Portman, Michael A

    2017-08-01

    This study evaluated the efficacy and safety of oral triiodothyronine (T3; Tetronine, Dalim BioTech, Korea) for infants and children undergoing cardiopulmonary bypass in an Indonesian population. We performed a single-center, randomized, double-blind, and placebo-controlled trial in children aged 3 years and younger undergoing congenital heart disease operations with cardiopulmonary bypass. We administered oral T3 (1 μg/kg per body weight/dose) or placebo (saccharum lactis) by nasogastric tube every 6 hours for 60 hours after induction of anesthesia. The primary end point, time to extubation, was compared with Cox regression. The modified intention-to-treat group included 101 placebo and 104 treated patients. The stratified log-rank test did not show a significant treatment difference (p = 0.061) for time to extubation, but after adjustment for age, the nutritional Z score, and Aristotle surgical complexity, the hazard ratio was 1.33 (95% confidence interval, 1.00 to 1.76; p = 0.049). The effect of T3 was stronger in the strata aged 5 months and younger (hazard ratio, 1.86; 95% confidence interval 1.02 to 3.39; p = 0.043). Median intubation time was 47.3 hours for the placebo and 32.1 hours for the T3 group in aged 5 months and younger. Adverse events rates, including arrhythmia, were similar between groups, although sepsis was more frequent with placebo. Oral T3 supplementation may shorten time to extubation in children undergoing congenital heart disease operations, particularly infants aged 5 months or younger. Administration is relatively safe, simple and inexpensive. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  13. Cerebroprotective effect of piracetam in patients undergoing open heart surgery.

    Science.gov (United States)

    Holinski, Sebastian; Claus, Benjamin; Alaaraj, Nour; Dohmen, Pascal Maria; Neumann, Konrad; Uebelhack, Ralf; Konertz, Wolfgang

    2011-01-01

    Reduction of cognitive function is a possible side effect after the use of cardiopulmonary bypass (CPB) during cardiac surgery. Since it has been proven that piracetam is cerebroprotective in patients undergoing coronary bypass surgery, we investigated the effects of piracetam on the cognitive performance of patients undergoing open heart surgery. Patients scheduled for elective open heart surgery were randomized to the piracetam or placebo group in a double-blind study. Patients received 12 g of piracetam or placebo at the beginning of the operation. Six neuropsychological subtests from the Syndrom Kurz Test and the Alzheimer's Disease Assessment Scale were performed preoperatively and on day 3, postoperatively. To assess the overall cognitive function and the degree of cognitive decline across all tests after the surgery, we combined the six test-scores by principal component analysis. A total of 88 patients with a mean age of 67 years were enrolled into the study. The mean duration of CPB was 110 minutes. Preoperative clinical parameters and overall cognitive functions were not significantly different between the groups. The postoperative combined score of the neuropsychological tests showed deterioration of cognitive function in both groups (piracetam: preoperative 0.19 ± 0.97 vs. postoperative -0.97 ± 1.38, p piracetam did not perform better than those taking placebo, and both groups had the same decline of overall cognitive function (p = 0.955). Piracetam had no cerebroprotective effect in patients undergoing open heart surgery. Unlike the patients who underwent coronary surgery, piracetam did not reduce the early postoperative decline of neuropsychological abilities in heart valve patients.

  14. New system of the in core monitoring - PTK SVRK

    International Nuclear Information System (INIS)

    Urban, P.

    2000-01-01

    In this paper author describes new system (PTK SVRK) for in-core monitoring system of the Mochovce nuclear power plant installed instead of the HINDUKUSH in-core monitoring system, which are determined to monitor the core parameters. This system (HINDUKUSH), supplied by the Russian party in scope of the original design, became old during the idle time, and the components, which is it built from, are not produced any more. Thus, its utilisation had to undergo a technical end economic analysis. It resulted in classification to the work complex of the technical specification of safety measures. Its implementation conditioned the commissioning of the power plant nuclear unit. The program and technical system of the in-core monitoring (PTK SVRK) consists of two levels - a 'closed' basic, which fulfils the task of the primal system operation for the Unit operators, and an 'open' top level, which serves as a tool for the additional tasks of a prognosis, monitoring, and analysis of the processes taking place in the nuclear core by the monitoring physicists. The basic level of PTK SVRK has 100% redundancy because of its composition and configuration. It is namely formed by two identical, equivalent, and independent sets. Any of them may be operational or redundant. Every set consists of an apparatus processing the signals coming from the technology or the calculation complex, which converts these signals to physical parameters and controls the physically mathematical model of the monitored equipment. The results are presented to the operational staff as outputs on the workstations in the control room in a form of cartograms, graphs, histograms, tables, etc. The bases of the system calculation model are time-proven programs BIPR7 and PERMAK, which are used also in this power plant. The top level of PTK SVRK has a structure supporting the system openness for its further utilisation. Today it is formed by a server and two workstations. Besides the above-mentioned tasks, the

  15. Isotope Fractionation Studies in Prestellar Cores: The Case of Nitrogen

    Science.gov (United States)

    Milam, Stefanie N.; Charnley, Steven B.

    2011-01-01

    Isotopically fractionated material is found in many solar system objects, including meteorites and comets. It is considered, in some cases, to trace interstellar material that was incorporated into the solar system without undergoing significant processing, thus preserving the fractionation. In interstellar molecular clouds, ion-molecule chemistry continually cycles nitrogen between the two main reservoirs - N and N2 - leading to only minor N-15 enrichments. Charnley and Rodgers showed that depletion of CO removes oxygen from the gas and weakens this cycle such that significant N-15 fractionation can occur for N2 and other N-bearing species in such cores. Observations are being conducted at millimeter and submillimeter wavelengths employing various facilities in order to both spatially and spectrally, resolve emission from these cores. A preliminary study to obtain the N-14/N-15 ratio in nitriles (HCN and HNC) was conducted at the Arizona Radio Observatory's 12m telescope on Kitt Peak, AZ. Spectra were obtained at high resolution (0.08 km/s) in order to resolve dynamic properties of each source as well as to resolve hyperfine structure present in certain isotopologues. This study included four dark cloud cores, observed to have varying levels of molecular depletion: L1521E, L1498, L1544, and L1521F. Previous studies of the N-14/N-15 ratio towards LI544 were obtained with N2H+ and NIH3, yielding ratios of 446 and >700, respectively. The discrepancy observed in these two measurements suggests a strong chemical dependence on the fractionation of nitrogen. Ratios (C,N, and D) obtained from isotopologues for a particular molecule are likely tracing the same chemical heritage and are directly comparable within a given source. Results and comparisons between the protostellar evolutionary state and isomer isotope fractionation as well as between other N-bearing species will be presented.

  16. Analysis of core and core barrel heat-up under conditions simulating severe reactor accidents

    International Nuclear Information System (INIS)

    Chellaiah, S.; Viskanta, R.; Ranganathan, P.; Anand, N.K.

    1987-01-01

    This paper reports on the development of a model for estimating the temperature distributions in the reactor core, core barrel, thermal shield and reactor pressure vessel of a PWR during an undercooling transient. A number of numerical calculations simulating the core uncovering of the TMI-2 reactor and the subsequent heat-up of the core have been performed. The results of the calculations show that the exothermic heat release due to Zircaloy oxidation contributes to the sharp heat-up of the core. However, the core barrel temperature rise which is driven by the temperature increase of the edge of the core (e.g., the core baffle) is very modest. The maximum temperature of the core barrel never exceeded 610 K (at a system pressure of 68 bar) after a 75 minute simulation following the start of core uncovering

  17. Internal flow of acoustically levitated drops undergoing sectorial oscillations

    International Nuclear Information System (INIS)

    Shen, C.L.; Xie, W.J.; Yan, Z.L.; Wei, B.

    2010-01-01

    We present the experimental observation and theoretical analysis of fluid flow in acoustically levitated water drop undergoing sectorial oscillations. The fluid always flows between the extended sections and the compressed sections. The magnitude of fluid velocity decreases from the equatorial fringe to the centre of levitated drop. The maximum fluid velocity is 60-160 mm/s and the Reynolds number of the oscillations is estimated to be 137-367. The internal flow of the drop is analyzed as potential flow, and the fluid velocity is found to be horizontal. In the equatorial plane, the calculated stream lines and velocity profiles agree well with the experimental observations.

  18. What exactly is core business?

    International Nuclear Information System (INIS)

    Massey, D.C.

    1998-01-01

    The 'how' and 'why' of major restructuring by petroleum producers since the 1970s were discussed with examples taken from the 1970 and 1997 world distribution of production, refining and petroleum products marketed by Chevron, Exxon, Mobil and Shell. Changes in net income per sector for major upstream and downstream industries, net changes in U.S. refining capacity in the 1990s, and the impact of low prices on 1998 capital expenditures were illustrated. The forces that govern national oil companies, and in this context the resistance to restructuring by the Asian oil industry, were also discussed. In general, the prediction is that the search for higher margins will continue to feed the trend towards diversification, and that diversification will remain an option as long as the core business remains exposed to the market price. figs

  19. Final Report - BRER Core Support

    International Nuclear Information System (INIS)

    Evan B. Douple

    2007-01-01

    This contract provided core support for activities of the advisory committee of experts comprising the Board on Radiation Effects Research (BRER), in The National Academies Division on Earth and Life Studies. That committee met two times during the funding period. The committee members provided oversight and advice regarding ongoing BRER projects and also assisted in the identification of potential committee members for new studies and the development of proposals for projects in the radiation sciences worthy for future study. In addition, funding provided support for the planning, advertisement, and invited speakers travel-expense reimbursement for the Third and Fourth Gilbert W. Beebe Symposia held at The National Academies on December 1, 2004 and on November 30, 2005, respectively

  20. Power reactor core safety research

    International Nuclear Information System (INIS)

    Rim, C.S.; Kim, W.C.; Shon, D.S.; Kim, J.

    1981-01-01

    As a part of nuclear safety research program, a project was launched to develop a model to predict fuel failure, to produce the data required for the localizaton of fuel design and fabrication technology, to establish safety limits for regulation of nuclear power plants and to develop reactor operation method to minimize fuel failure through the study of fuel failure mechanisms. During 1980, the first year of this project, various fuel failure mechanisms were analyzed, an experimental method for out-of-pile tests to study the stress corrosion cracking (SCC) behaviour of Zircaloy cladding underiodine environment was established, and characteristics of PWR and CANDU Zircaloy specimens were examined. Also developed during 1980 were the methods and correlations to evaluate fuel failures in the reactor core based on operating data from power reactors

  1. The HRQoL of Chinese patients undergoing haemodialysis.

    Science.gov (United States)

    Yu, Hui-Dan; Petrini, Marcia A

    2010-03-01

    With the transition from infectious disease and acute illness to chronic disease and degenerative illness as leading causes of death, health-related quality of life has become an important aspect in assessing the burden of chronic disease. The quality of life of haemodialysis patients has been studied extensively; however, very limited research using exploratory descriptive design has been carried out in this area in China. The aim of this study was to explore health-related quality of life of end-stage renal disease patients undergoing haemodialysis in China. This study used the qualitative research design approach. A semi-structured, in-depth interview was conducted with 16 haemodialysis patients in two hospitals using Colaizzi's phenomenological method to transcribe and analyse the data. The results of this study showed that dialysis patients show improvement in physical competence, but they also experienced emotional instability and psychological distress, financial burdens, inadequate disease knowledge and less social support which influenced their quality of life. To optimise the patients undergoing dialysis health-related quality of life, support of psycho-social-economical aspects should be enhanced. Health care providers should give haemodialysis patients thorough health education, individualised psychological and emotional intervention and adequate social support to optimise health-related quality of life.

  2. TEMPERATURE STRUCTURE OF PROTOPLANETARY DISKS UNDERGOING LAYERED ACCRETION

    International Nuclear Information System (INIS)

    Lesniak, M. V.; Desch, S. J.

    2011-01-01

    We calculate the temperature structures of protoplanetary disks (PPDs) around T Tauri stars heated by both incident starlight and viscous dissipation. We present a new algorithm for calculating the temperatures in disks in hydrostatic and radiative equilibrium, based on Rybicki's method for iteratively calculating the vertical temperature structure within an annulus. At each iteration, the method solves for the temperature at all locations simultaneously, and converges rapidly even at high (>>10 4 ) optical depth. The method retains the full frequency dependence of the radiation field. We use this algorithm to study for the first time disks evolving via the magnetorotational instability. Because PPD midplanes are weakly ionized, this instability operates preferentially in their surface layers, and disks will undergo layered accretion. We find that the midplane temperatures T mid are strongly affected by the column density Σ a of the active layers, even for fixed mass accretion rate M-dot . Models assuming uniform accretion predict midplane temperatures in the terrestrial planet forming region several x 10 2 K higher than our layered accretion models do. For M-dot -7 M sun yr -1 and the column densities Σ a -2 associated with layered accretion, disk temperatures are indistinguishable from those of a passively heated disk. We find emergent spectra are insensitive to Σ a , making it difficult to observationally identify disks undergoing layered versus uniform accretion.

  3. Unemployment risk among individuals undergoing medical treatment for chronic diseases.

    Science.gov (United States)

    Nakaya, N; Nakamura, T; Tsuchiya, N; Tsuji, I; Hozawa, A; Tomita, H

    2016-03-01

    Chronic diseases increase the risk of unemployment even in non-disaster settings; therefore, in post-disaster settings, special attention needs to be paid to the employment status of those suffering from chronic diseases. To examine the association between chronic disease and the risk of unemployment in a disaster area. This cross-sectional study was conducted in Shichigahama Town, Miyagi, north-eastern Japan, where had been severely inundated by the 2011 tsunami. Logistic regression analyses were used to evaluate the association between undergoing medical treatment for a combination of chronic diseases (stroke, cancer, myocardial infarction and angina) and unemployment risk. Confounders such as psychological distress and levels of daily life activity were considered. Among the 2588 individuals studied, there was a statistically significant association between undergoing medical treatment for chronic disease and the risk of unemployment [odds ratio (OR) = 1.7, 95% confidence interval (CI) 1.02-2.7, P unemployment risk was observed only in participants with a higher degree of psychological distress and/or poorer levels of daily life activity. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  4. Dental calculus formation in children and adolescents undergoing hemodialysis.

    Science.gov (United States)

    Martins, Carla; Siqueira, Walter Luiz; Oliveira, Elizabeth; Nicolau, José; Primo, Laura Guimarães

    2012-10-01

    This study aimed to determine whether dental calculus formation is really higher among patients with chronic kidney disease undergoing hemodialysis than among controls. Furthermore, the study evaluated correlations between dental calculus formation and dental plaque, variables that are related to renal disease and/or saliva composition. The Renal Group was composed of 30 patients undergoing hemodialysis, whereas the Healthy Group had 30 clinically healthy patients. Stimulated whole saliva and parotid saliva were collected. Salivary flow rate and calcium and phosphate concentrations were determined. In the Renal Group the saliva collection was carried out before and after a hemodialysis session. Patients from both groups received intraoral exams, oral hygiene instructions, and dental scaling. Three months later, the dental calculus was measured by the Volpe-Manhold method to determine the rate of dental calculus formation. The Renal Group presented a higher rate of dental calculus formation (p dental calculus formation and whole saliva flow rate in the Renal Group after a hemodialysis session (r = 0.44, p dental calculus was associated with phosphate concentration in whole saliva from the Renal Group (p dental calculus formation, probably due to salivary variables.

  5. Children Undergoing Radiotherapy: Swedish Parents’ Experiences and Suggestions for Improvement

    Science.gov (United States)

    Mullaney, Tara; Nilsson, Kristina; Wickart-Johansson, Gun; Svärd, Anna-Maja; Nyholm, Tufve; Lindh, Jack; Lindh, Viveca

    2015-01-01

    Approximately 300 children, from 0 to 18 years old, are diagnosed with cancer in Sweden every year. Of these children, 80–90 of them undergo radiotherapy treatment for their cancer. Although radiotherapy is an encounter with advanced technology, few studies have investigated the child’s and the parent’s view of the procedure. As part of an ongoing multicenter study aimed to improve patient preparation and the care environment in pediatric radiotherapy, this article reports the findings from interviews with parents at baseline. The aim of the present study was twofold: to describe parents’ experience when their child undergoes radiotherapy treatment, and to report parents’ suggestions for improvements during radiotherapy for their children. Sixteen mothers and sixteen fathers of children between 2–16 years old with various cancer diagnoses were interviewed. Data were analyzed using content analysis. The findings showed that cancer and treatment turns people’s lives upside down, affecting the entire family. Further, the parents experience the child’s suffering and must cope with intense feelings. Radiotherapy treatment includes preparation by skilled and empathetic staff. The parents gradually find that they can deal with the process; and lastly, parents have suggestions for improvements during the radiotherapy treatment. An overarching theme emerged: that despair gradually turns to a sense of security, with a sustained focus on and close interaction with the child. In conclusion, an extreme burden was experienced around the start of radiotherapy, though parents gradually coped with the process. PMID:26509449

  6. Attention-deficit/hyperactivity disorder in children undergoing peritoneal dialysis.

    Science.gov (United States)

    Yousefichaijan, Parsa; Sharafkhah, Mojtaba; Vazirian, Shams; Seyedzadeh, Abolhasan; Rafeie, Mohammad; Salehi, Bahman; Amiri, Mohammad; Ebrahimimonfared, Mohsen

    2015-03-01

    Attention-deficit/hyperactivity disorder (ADHD) is the most common childhood psychiatric disorder. This disorder is more prevalent in some chronic disease. The aim of this study was to investigate ADHD in children with end-stage renal disease (ESRD) undergoing continuous ambulatory peritoneal dialysis (CAPD) and to compare the results with those of healthy children. This case-control study was conducted for six months (December 22, 2013 to June 21, 2014) on five to 16-year-old children, visiting the Pediatric Dialysis Unit of Amirkabir Hospital, Arak, Iran, and Taleghani Hospital, Kermanshah, Iran. A total of 100 children with ESRD who had undergone CAPD for at least six months and 100 healthy children were included in this study as case and control groups, respectively. ADHD was diagnosed by Conner's Parent Rating Scale-48 (CPRS-48) and DSM-IV-TR criteria, and was confirmed through consultation by psychologist. Data were analyzed by Binomial test in SPSS 18. The ADHD inattentive type was observed in 16 cases (16%) with CAPD and five controls (5%) (P = 0.01). Moreover, ADHD hyperactive-impulsive type was observed in 27 cases (27%) with CAPD and seven controls (9%) (P = 0.002). Despite these significant differences, no children were diagnosed with ADHD combined type among all subjects. Inattentive type and hyperactive-impulsive type of ADHD are more prevalent in children with ESRD undergoing CAPD. Therefore screening methods for ADHD is necessary in these patients.

  7. Pulmonary hypertenstion ad leading factor in patients undergoing dialysis

    International Nuclear Information System (INIS)

    Rehman, I.U.; Sumera, A.; Idrees, M.K.; Tanweer, A.

    2014-01-01

    Objective: To determine the frequency and leading factors of pulmonary hypertension among chronic hemodialysis patients. Study Design: Case series. Place and Duration of Study: Hemodialysis Unit, Department of Nephrology, Sindh Institute of Urology and Transplantation, Karachi, from September 2011 to March 2012. Methodology: Patients of either gender aged between 16 to 60 years of age undergoing hemodialysis for at least 3 months not having pre-existing valvular heart disease, chronic lung disease or connective tissue disorder were included. Pulmonary hypertension was prospectively estimated by Doppler echocardiogram on patients undergoing dialysis. Pulmonary artery pressure was calculated on the post-dialysis day and leading factors were compared between patients with and without pulmonary hypertension. Results: A total of 178 patients were included in study with male to female ratio120/58 (2.06:1). The mean age was 33.84 +- 11.9 years. The mean duration of hemodialysis was 23.85 +- 22.48 months. Pulmonary hypertension was found in 76 (42.7%) patients. Out of the studied factors, low serum albumin ( 3.4 mg/dl, p = 0.01) was found to be statistically significant in patients with pulmonary hypertension. Conclusion: Pulmonary hypertension was frequently present in dialysis population (42.7%). This subset of patients had significantly lower albumin levels in serum. More research is needed in its pathogenesis to arrest its course. (author)

  8. PSYCHOSOCIAL MORBIDITY IN PATIENTS UNDERGOING MASTECTOMY FOR BREAST CANCER

    Directory of Open Access Journals (Sweden)

    Kavitha Konnakkaparambil Ramakrishnan

    2018-02-01

    Full Text Available BACKGROUND Breast Cancer is the most common female cancer worldwide and carries significant psychosocial morbidity. The diagnosis of the disease and the treatment modalities like surgery and chemotherapy contribute to the morbidity. The recognition of the psychosocial morbidity associated with mastectomy can help us formulate effective counselling strategies. The objectives of this study were- to assess the psychosocial morbidity in patients undergoing mastectomy for carcinoma breast, to identify the preoperative variables that predict the morbidity and to find out the correlation between degree of neuroticism of the individual and morbidity. MATERIALS AND METHODS 35 female patients who had mastectomy for breast cancer were evaluated at three time-points, preoperatively, immediately after surgery and 2 months after surgery. Anxiety and depression was assessed using Hospital Anxiety and Depression Scale (HADS, psychological distress was measured using General Health Questionnaire (GHQ-12 and neuroticism was assessed by Eysenck Personality Inventory Neuroticism subscale (EPI-N. RESULTS There was a high level of anxiety, depression and GHQ scores preoperatively with a further worsening of these over the three interviews. Age, marital status and menopausal status were factors which had an influence on psychosocial morbidity. Preoperative EPI-N scores positively correlated with psychosocial morbidity. CONCLUSION There is a high level of psychosocial morbidity in patients undergoing mastectomy for breast cancer and mastectomy seems to worsen it in the first two months after surgery. Our study shows that psychosocial morbidity is affected by age, marital status, menopausal status and level of neuroticism.

  9. Dental Health of Patients Undergoing Hemodialysis (A Study

    Directory of Open Access Journals (Sweden)

    Vinay Mohan

    2011-01-01

    Full Text Available The primary purpose of this study was to determine the oral manifestations of patients undergoing dialysis. Two subgroups of the population were studied: (1 Those who have been on dialysis for less than one year, (2 those who have been on dialysis for more than one year. Two dental indices–periodontal index and decayed, missing, filled index were used to identify periodontal status, dental canes activity. Data were compiled and analyzed by using the unpaired t-test. Results suggested that 100% (n = 26 of the patients undergoing dialysis presented with some form of periodontal disease (mean value = 2.24, standard deviation = 1.33. Majority of the patients displayed either established periodontal disease (57.6% or the beginning of periodontal disease (38 4%. Approximately, 70% of the patients had high decayed, missing, filled index (mean value = 6.19, standard deviation = 6.40. Findings led to the conclusion that patients on dialysis need comprehensive professional oral care and self-care instructions. The source of infection in oral cavity can cause variety of systemic diseases, causing morbidity and mortality in these immune-suppressed patients.

  10. Management of Patients with Orthopaedic Implants Undergoing Dental Procedures.

    Science.gov (United States)

    Quinn, Robert H; Murray, Jayson N; Pezold, Ryan; Sevarino, Kaitlyn S

    2017-07-01

    The American Academy of Orthopaedic Surgeons, in collaboration with the American Dental Association, has developed Appropriate Use Criteria (AUC) for the Management of Patients with Orthopaedic Implants Undergoing Dental Procedures. Evidence-based information, in conjunction with the clinical expertise of physicians, was used to develop the criteria to improve patient care and obtain best outcomes while considering the subtleties and distinctions necessary in making clinical decisions. The Management of Patients with Orthopaedic Implants Undergoing Dental Procedures AUC clinical patient scenarios were derived from indications of patients with orthopaedic implants presenting for dental procedures, as well as from current evidence-based clinical practice guidelines and supporting literature to identify the appropriateness of the use of prophylactic antibiotics. The 64 patient scenarios and 1 treatment were developed by the writing panel, a group of clinicians who are specialists in this AUC topic. Next, a separate, multidisciplinary, voting panel (made up of specialists and nonspecialists) rated the appropriateness of treatment of each patient scenario using a 9-point scale to designate a treatment as Appropriate (median rating, 7 to 9), May Be Appropriate (median rating, 4 to 6), or Rarely Appropriate (median rating, 1 to 3).

  11. Cerebroprotective effect of piracetam in patients undergoing coronary bypass burgery.

    Science.gov (United States)

    Holinski, Sebastian; Claus, Benjamin; Alaaraj, Nour; Dohmen, Pascal Maria; Kirilova, Kremena; Neumann, Konrad; Uebelhack, Ralf; Konertz, Wolfgang

    2008-11-01

    Reduction of cognitive function is a possible side effect after cardiac surgery using cardiopulmonary bypass. We investigated the cerebroprotective effect of piracetam on cognitive performance in patients undergoing coronary artery bypass surgery under cardiopulmonary bypass. Patients scheduled for elective, primary and isolated coronary bypass surgery were randomised either to piracetam or placebo group. The study was performed in a double blind fashion. Patients received either 12 g piracetam or placebo at the beginning of the operation. Six neuropsychological subtests from the Syndrom Kurz Test and the Alzheimer's Disease Assessment Scale were performed preoperatively and on the third postoperative day. To assess the overall cognitive function and the degree of cognitive decline across all tests after surgery we combined the six test-scores by principal component analysis. A total number of 120 patients were enrolled into the study. Preoperative overall cognitive function were not significantly different between the groups. The postoperative combined score of the neuropsychological tests showed a deterioration of cognitive function in both groups (placebo-pre: -0.06+/-0.99 vs placebo-post: -1.38+/-1.11; ppiracetam-pre: 0.06+/-1.02 vs piracetam-post: -0.65+/-0.93; ppiracetam patients performed significantly better compared to the placebo patients after the operation and had a less decline of overall cognitive function (pPiracetam has a cerebroprotective effect in patients undergoing coronary artery bypass surgery with the use of cardiopulmonary bypass. It reduces an early postoperative substantial decline of neuropsychological abilities.

  12. Managing direct oral anticoagulants in patients undergoing dentoalveolar surgery.

    Science.gov (United States)

    Patel, J P; Woolcombe, S A; Patel, R K; Obisesan, O; Roberts, L N; Bryant, C; Arya, R

    2017-02-24

    Our objective was to describe our experience of managing a cohort of adult patients prescribed direct oral anticoagulants (DOACs) undergoing dentoalveolar procedures between November 2012 and May 2016. Prior to conducting a procedure a formal assessment was made of each patient's anticoagulation treatment. A specific plan was then formulated, balancing the risk of bleeding with the risk of thrombosis. Patients received a telephone consultation one week following treatment to assess any post-operative bleeding. Eighty-two patients underwent 111 oral surgical procedures, the majority of which were dental extractions. In the case of 35 (32%) procedures, advice was given to omit the DOAC, either before or after treatment. There was no bleeding following the majority of procedures. Persistent bleeding followed 15 (13.5%) procedures, of which 7 (6.3%) procedures required specific intervention. The majority of patients prescribed DOACs can undergo dentoalveolar procedures safely. Important considerations when planning treatment are: (i) when the patient usually takes their dose of DOAC, (ii) the time the procedure is performed and, (iii) when the DOAC is taken post-procedure. In our experience, if these factors are considered carefully, omission of DOAC doses is unlikely to be required for most patients.

  13. Effect of internet on Chinese patients undergoing elective laparoscopic cholecystectomy.

    Science.gov (United States)

    Xu, Xiequn; Hong, Tao; Li, Binglu; Liu, Wei

    2015-04-01

    It is a growing trend that patients seek health information on the internet to self-educate and self-diagnose, which impacts their health decisions. The aim of the study was to investigate how Chinese patients undergoing elective laparoscopic cholecystectomy (LC) sought information about their disease and treatment, how they preferred the information to be presented, and how it influenced them. A descriptive, cross-sectional-designed questionnaire was employed to obtain information from 248 Chinese patients undergoing elective LC in Peking Union Medical College Hospital. A total of 223 patients (89.9 %) sought health information from the internet. Patients searching the internet for information about LC were younger than those who did not. It varied with employment status, educational level, and household average income. Among patients searching the internet for LC information, 35.4 % felt more worried and 37.2 % felt more assured; 15.2 % went to visit other doctors and 8.5 % considered changing their treatment because of internet use. A significant proportion of patients used the internet to obtain information about their disease. Age, employment status, educational level, and household average monthly income had an effect on internet usage for LC information. The use of the internet could cause mixed emotional outcomes among patients. Physicians should guide Chinese patients to professional websites of high quality and take time to discuss the information with patients during their visits and consultations.

  14. Fospropofol Disodium for Sedation in Elderly Patients Undergoing Flexible Bronchoscopy.

    Science.gov (United States)

    Silvestri, Gerard A; Vincent, Brad D; Wahidi, Momen M

    2011-01-01

    BACKGROUND: Fospropofol disodium is a water-soluble prodrug of propofol. A subset analysis was undertaken of elderly patients (≥65 y) undergoing flexible bronchoscopy, who were part of a larger multicenter, randomized, double-blind study. METHODS: Patients received fentanyl citrate (50 mcg) followed by fospropofol at initial (4.88mg/kg) and supplemental (1.63mg/kg) doses. The primary end point was sedation success (3 consecutive Modified Observer's Assessment of Alertness/Sedation scores of ≤4 and procedure completion without alternative sedative or assisted ventilation). Treatment success, time to fully alert, patient and physician satisfaction, and safety/tolerability were also evaluated. RESULTS: In the elderly patients subset (n=61), sedation success was 92%, the mean time to fully alert was 8.0±10.9 min, and memory retention was 72% during recovery, and these were comparable with the younger patients subgroup (age, Sedation-related adverse events occurred in 23% of the elderly and 18% of the younger patients (age, sedation, rapid time to fully alert, and high satisfaction in this elderly subset undergoing flexible bronchoscopy, which was comparable with outcomes in younger patients.

  15. Hematoma formation during breast core needle biopsy in women taking antithrombotic therapy.

    Science.gov (United States)

    Chetlen, Alison L; Kasales, Claudia; Mack, Julie; Schetter, Susann; Zhu, Junjia

    2013-07-01

    The purpose of this study was to compare hematoma formation after breast core needle biopsy performed on patients undergoing and those not undergoing concurrent antithrombotic therapy. A prospective assessment of core needle biopsies (stereotactic, ultrasound guided, or MRI guided) performed on patients enrolled between September 2011 and July 2012 formed the basis of this study. Postprocedure mediolateral and craniocaudal mammograms were evaluated for the presence and size of hematomas. Patients were clinically evaluated for complications 24-48 hours after the procedure through telephone call or face-to-face consultation. Needle size, type of biopsy, and presence of hematoma and documented complications were correlated with use of antithrombotic agents (including aspirin, warfarin, clopidogrel, and daily nonsteroidal antiinflammatory medications). No clinically significant hematomas or bleeding complications were found. Eighty-nine of 617 (14.4%) non-clinically significant hematomas were detected on postprocedure mammograms. The probability of development of a non-clinically significant hematoma was 21.6% for patients taking antithrombotics and 13.0% for those not taking antithrombotics. Concurrent antithrombotic therapy and larger needle gauge were significant factors contributing to the probability of hematoma formation. The volume of the hematoma was not related to needle gauge or presence of antithrombotic therapy. No clinically significant hematomas were found. Because there are potential life-threatening risks to stopping antithrombotic therapy before breast biopsy, withholding antithrombotic therapy for core needle breast biopsy is not recommended because the incidence of non-clinically significant hematoma is low.

  16. Assessing infertility-related stress: the factor structure of the Fertility Problem Inventory in Italian couples undergoing infertility treatment.

    Science.gov (United States)

    Donarelli, Zaira; Gullo, Salvatore; Lo Coco, Gianluca; Marino, Angelo; Scaglione, Piero; Volpes, Aldo; Allegra, Adolfo

    2015-01-01

    The factor structure of the Fertility Problem Inventory (FPI) and its invariance across gender were examined in Italian couples undergoing infertility treatment. About 1000 subjects (both partners of 500 couples) completed two questionnaires prior to commencing infertility treatment at a private Clinic in Palermo, Italy. Confirmatory Factor Analysis demonstrated that the original factor structure of the FPI was partially confirmed. Two correlated factors (Infertility Life Domains and Importance of Parenthood) were obtained via a post hoc Exploratory Factor Analysis. Finally, the invariance of this factor structure across gender was confirmed. The study supported the relevance of two interrelated factors specific to infertility stress which could help clinicians to focus on the core infertility-related stress domains of infertile couples.

  17. Inner Core Rotation from Geomagnetic Westward Drift and a Stationary Spherical Vortex in Earth's Core

    Science.gov (United States)

    Voorhies, C. V.

    1999-01-01

    The idea that geomagnetic westward drift indicates convective leveling of the planetary momentum gradient within Earth's core is pursued in search of a differentially rotating mean state, upon which various oscillations and secular effects might be superimposed. The desired state conforms to roughly spherical boundary conditions, minimizes dissipative interference with convective cooling in the bulk of the core, yet may aide core cooling by depositing heat in the uppermost core and lower mantle. The variational calculus of stationary dissipation applied to a spherical vortex within the core yields an interesting differential rotation profile akin to spherical Couette flow bounded by thin Hartmann layers. Four boundary conditions are required. To concentrate shear induced dissipation near the core-mantle boundary, these are taken to be: (i) no-slip at the core-mantle interface; (ii) geomagnetically estimated bulk westward flow at the base of the core-mantle boundary layer; (iii) no-slip at the inner-outer core interface; and, to describe magnetic locking of the inner core to the deep outer core, (iv) hydrodynamically stress-free at the inner-outer core boundary. By boldly assuming the axial core angular momentum anomaly to be zero, the super-rotation of the inner core is calculated to be at most 1.5 degrees per year.

  18. Installation of JMTR core management system

    International Nuclear Information System (INIS)

    Imaizumi, Tomomi; Ide, Hiroshi; Naka, Michihiro; Komukai, Bunsaku; Nagao, Yoshiharu

    2013-01-01

    In order to carry out the core management after the reoperation of JMTR quickly and accurately, the authors took up the Standard Reactor Analysis Code (SRAC) system and core management support programs that are operating in a general-purpose large computer and transferred them to PC (OS: Linux), and newly established a JMTR core management system. As for the core analysis, this measure enabled an increase in the processing speed from the check of core arrangement to the result display of nuclear restriction values to about 60 times, compared with the conventional method. It was confirmed that the differences of calculation results originated from the difference of internal display of computers, associated with the transfer of each analysis code from GS21-400 system to PC-Linux, were within practically allowable level. In the future, this system will be applied to the core analysis of JMTR, as well as to the preparation of operation plans. (A.O.)

  19. Adaption of core simulations to detector readings

    International Nuclear Information System (INIS)

    Lindahl, S.Oe.

    1985-05-01

    The shortcomings of the conventional core supervision methods are briefly discussed. A new strategy for core surveillance is proposed The strategy is based on a combination of analytical evaluation of detailed core power and adaption of these to detector measurements. The adaption is carried out 1) each time the simulator is executed by use of averaged detector readings and 2) once a year (approximately) in which case the coefficients of the simulator's equations are overviewed. In the yearly overview, calculations are tuned to measurements (TIP, γ-scannings, k-eff) by parameter optimization or by inversion of the diffusion equation. The proposed strategy is believed to increase the accuracy of the core surveillance, to yield improved thermal margins, to increase the accuracy of core predictions and design calculations, and to lessen the dependence of core surveillance on the detector equipment. (author)

  20. Advantages of iron core in a tokamak

    International Nuclear Information System (INIS)

    Bettis, E.S.; Ballou, J.K.; Becraft, W.R.; Peng, Y.K.M.; Watts, H.L.

    1977-01-01

    A quantitative comparison of the iron core vs air core concepts was carried out on a preliminary basis by using a representative tokamak reactor design with the following self-consistent reference parameters. In the area of plasma engineering, poloidal field and MHD equilibrium considerations with an unsaturated iron core is discussed. The question of proper poloidal field coils to maintain D-shaped plasmas of relatively high anti β (7%) with a saturated iron core is also discussed. Estimates of the required iron core size, volt seconds, magnetic flux and its influence on force loading on the superconducting toroidal field coils are shown. Conceptual designs of the mechanical structure of an iron core device are presented. Favorable impacts on the OH power supply cost and complexity are indicated

  1. Nasogastric intubation causes gastroesophageal reflux in patients undergoing elective laparotomy.

    LENUS (Irish Health Repository)

    Manning, B J

    2012-02-03

    BACKGROUND: The routine use of nasogastric tubes in patients undergoing elective abdominal operation is associated with an increased incidence of postoperative fever, atelectasis, and pneumonia. Previous studies have shown that nasogastric tubes have no significant effect on the incidence of gastroesophageal reflux or on lower esophageal sphincter pressure in healthy volunteers. We hypothesized that nasogastric intubation in patients undergoing laparotomy reduces lower esophageal sphincter pressure and promotes gastroesophageal reflux in the perioperative period. METHODS: A prospective randomized case-control study was undertaken in which 15 consenting patients, admitted electively for bowel surgery, were randomized into 2 groups. Group 1 underwent nasogastric intubation after induction of anesthesia, and Group 2 did not. All patients had manometry and pH probes placed with the aid of endoscopic vision at the lower esophageal sphincter and distal esophagus, respectively. Nasogastric tubes, where present, were left on free drainage, and sphincter pressures and pH were recorded continuously during a 24-hour period. Data were analyzed with 1-way analysis of variance. RESULTS: The mean number of reflux episodes (defined as pH < 4) in the nasogastric tube group was 137 compared with a median of 8 episodes in the group managed without nasogastric tubes (P =.006). The median duration of the longest episode of reflux was 132 minutes in Group 1 and 1 minute in Group 2 (P =.001). A mean of 13.3 episodes of reflux lasted longer than 5 minutes in Group 1, with pH less than 4 for 37.4% of the 24 hours. This was in contrast to Group 2 where a mean of 0.13 episodes lasted longer than 5 minutes (P =.001) and pH less than 4 for 0.2% of total time (P =.001). The mean lower esophageal sphincter pressures were lower in Group 1. CONCLUSIONS. These findings demonstrate that patients undergoing elective laparotomy with routine nasogastric tube placement have significant gastroesophageal

  2. Core analysis: new features and applications

    International Nuclear Information System (INIS)

    Edenius, M.; Kurcyusz, E.; Molina, D.; Wiksell, G.

    1995-01-01

    Today, core analysis may be performed with sophisticated software capable of both steady state and transient analysis using a common methodology for BWRs and PWRs. General trends in core analysis software development are: improved accuracy, automated engineering functions; three-dimensional transient capability; graphical user interfaces. As a demonstration of such software, new features of Studsvik-CMS (Core management system) and examples of applications are discussed in this article. 2 figs., 8 refs

  3. Briefing paper for universities on Core Maths

    OpenAIRE

    Glaister, Paul

    2015-01-01

    This briefing paper outlines the rationale for and development of the new Core Maths qualifications, the characteristics of Core Maths, and why Core Maths is important for higher education. It is part of a communication to university vice-chancellors from the Department for Business, Innovation and Skills (BIS) comprising this paper and a joint Ministerial letter from Jo Johnson, Minister of State for Universities and Science in BIS, and Nick Gibb, Minister of State for Schools in the Departm...

  4. Core body temperature in obesity123

    Science.gov (United States)

    Heikens, Marc J; Gorbach, Alexander M; Eden, Henry S; Savastano, David M; Chen, Kong Y; Skarulis, Monica C

    2011-01-01

    Background: A lower core body temperature set point has been suggested to be a factor that could potentially predispose humans to develop obesity. Objective: We tested the hypothesis that obese individuals have lower core temperatures than those in normal-weight individuals. Design: In study 1, nonobese [body mass index (BMI; in kg/m2) <30] and obese (BMI ≥30) adults swallowed wireless core temperature–sensing capsules, and we measured core temperatures continuously for 24 h. In study 2, normal-weight (BMI of 18–25) and obese subjects swallowed temperature-sensing capsules to measure core temperatures continuously for ≥48 h and kept activity logs. We constructed daily, 24-h core temperature profiles for analysis. Results: Mean (±SE) daily core body temperature did not differ significantly between the 35 nonobese and 46 obese subjects (36.92 ± 0.03°C compared with 36.89 ± 0.03°C; P = 0.44). Core temperature 24-h profiles did not differ significantly between 11 normal-weight and 19 obese subjects (P = 0.274). Women had a mean core body temperature ≈0.23°C greater than that of men (36.99 ± 0.03°C compared with 36.76 ± 0.03°C; P < 0.0001). Conclusions: Obesity is not generally associated with a reduced core body temperature. It may be necessary to study individuals with function-altering mutations in core temperature–regulating genes to determine whether differences in the core body temperature set point affect the regulation of human body weight. These trials were registered at clinicaltrials.gov as NCT00428987 and NCT00266500. PMID:21367952

  5. Prediction of PEC core mechanical behaviour

    International Nuclear Information System (INIS)

    Cecchini, F.; Di Francesca, R.; Mcloughlin, J.; Neri, P.

    1984-01-01

    A brief description of the original PEC core restraint system is presented. Recent advanced seismic analysis studies have necessitated the introduction of anti-seismic design modifications which have increased the difficulties of fuel handling. Computer codes and numerical methods, used by ENEA to resolve core restraint and fuel handling problems are given together with an outline of mechanical tests and handling experiments in support of the anti-seismic core design. (author)

  6. Prevention of hypothermia in patients undergoing orthotopic liver transplantation using the humigard® open surgery humidification system: a prospective randomized pilot and feasibility clinical trial.

    Science.gov (United States)

    Weinberg, Laurence; Huang, Andrew; Alban, Daniel; Jones, Robert; Story, David; McNicol, Larry; Pearce, Brett

    2017-01-23

    Perioperative thermal disturbances during orthotopic liver transplantation (OLT) are common. We hypothesized that in patients undergoing OLT the use of a humidified high flow CO 2 warming system maintains higher intraoperative temperatures when compared to standardized multimodal strategies to maintain thermoregulatory homeostasis. We performed a randomized pilot study in adult patients undergoing primary OLT. Participants were randomized to receive either open wound humidification with a high flow CO 2 warming system in addition to standard care (Humidification group) or to standard care alone (Control group). The primary end point was nasopharyngeal core temperature measured 5 min immediately prior to reperfusion of the donor liver (Stage 3 - 5 min). Secondary endpoints included intraoperative PaCO 2 , minute ventilation and the use of vasoconstrictors. Eleven patients were randomized to each group. Both groups were similar for age, body mass index, MELD, SOFA and APACHE II scores, baseline temperature, and duration of surgery. Immediately prior to reperfusion (Stage 3 - 5 min) the mean (SD) core temperature was higher in the Humidification Group compared to the Control Group: 36.0 °C (0.13) vs. 35.4 °C (0.22), p = 0.028. Repeated measured ANOVA showed that core temperatures over time during the stages of the transplant were higher in the Humidification Group compared to the Control Group (p < 0.0001). There were no significant differences in the ETCO 2 , PaCO 2 , minute ventilation, or inotropic support. The humidified high flow CO 2 warming system was superior to standardized multimodal strategies in maintaining normothermia in patients undergoing OLT. Use of the device was feasible and did not interfere with any aspects of surgery. A larger study is needed to investigate if the improved thermoregulation observed is associated with improved patient outcomes. ACTRN12616001631493 . Retrospectively registered 25 November 2016.

  7. Evaluation of In-Core Fuel Management for the Transition Cores of RSG-GAS Reactor to Full-Silicide Core

    International Nuclear Information System (INIS)

    S, Tukiran; MS, Tagor; P, Surian

    2003-01-01

    The core conversion of RSG-GAS reactor from oxide to silicide core with meat density of 2.96 gU/cc has been done. The core-of RSG-GAS reactor has been operated full core of silicide fuels which is started with the mixed core of oxide-silicide start from core 36. Based on previous work, the calculated core parameter for the cores were obtained and it is needed 9 transition cores (core 36 - 44) to achieve a full-silicide core (core 45). The objective of this work is to acquire the effect of the increment of the number of silicide fuel on the core parameters. Conversion core was achieved by transition cores mixed oxide-silicide fuels. Each transition core is calculated and measured core parameter such as, excess reactivity and shutdown margin. Calculation done by Batan-EQUIL-2D code and measurement of the core parameters was carried out using the method of compensation of couple control rods. The results of calculation and experiment shows that the excess reactivity trends lower with the increment of the number of silicide fuel in the core. However, the shutdown margin is not change with the increment of the number of silicide fuel. Therefore, the transition cores can be operated safely to a full-silicide core

  8. Reactor core of FBR type reactor

    International Nuclear Information System (INIS)

    Hayashi, Hideyuki; Ichimiya, Masakazu.

    1994-01-01

    A reactor core is a homogeneous reactor core divided into two regions of an inner reactor core region at the center and an outer reactor core region surrounding the outside of the inner reactor core region. In this case, the inner reactor core region has a lower plutonium enrichment degree and less amount of neutron leakage in the radial direction, and the outer reactor core region has higher plutonium enrichment degree and greater amount of neutron leakage in the radial direction. Moderator materials containing hydrogen are added only to the inner reactor core fuels in the inner reactor core region. Pins loaded with the fuels with addition of the moderator materials are inserted at a ratio of from 3 to 10% of the total number of the fuel pins. The moderator materials containing hydrogen comprise zirconium hydride, titanium hydride, or calcium hydride. With such a constitution, fluctuation of the power distribution in the radial direction along with burning is suppressed. In addition, an absolute value of the Doppler coefficient can be increased, and a temperature coefficient of coolants can be reduced. (I.N.)

  9. Review of advanced core designs for LMFBRs

    International Nuclear Information System (INIS)

    Yoshida, Kazuo

    1986-01-01

    It is a matter of great importance for the development of LMFBR to reduce its power cost to the level of the other power generating means. For this purpose, some ideas that use advanced core concepts to reduce LMFBR's power cost by improving its fuel cycle economics have recently been proposed. In this report, two hopeful ideas that use advanced core concepts: (1) Ultra Long Life Core (ULLC) - non-refueling over LMFBR power plant life; (2) Integral Fast Reactor (IFR) concept - metal fueled core and pyrometallurgical reprocessing; are picked up and their economical effect and technical probrems are investigated. (author)

  10. Early Dynamics of the Moon's Core

    Science.gov (United States)

    Cuk, Matija; Hamilton, Douglas; Stewart, Sarah T.

    2018-04-01

    The Moon has a small molten iron core (Williams et al. 2006). Remanent magnetization in lunar rocks likely derives from a past lunar dynamo (Wieczorek 2018 and references therein), which may have been powered by differential precession between the mantle and the core. The rotations of the lunar mantle and core were largely decoupled for much of lunar history, with a large mutual offset during the Cassini State Transition (Meyer and Wisdom, 2011). It is likely that the past work underestimated lunar obliquities, and therefore core offsets, during early lunar history (Cuk et al. 2016). Here we investigate the dynamics of the lunar core and mantle using a Lie-Poisson numerical integrator (Touma and Wisdom 2001) which includes interactions between triaxial core and mantle, as well as all gravitational and tidal effects included in the model of Cuk et al. (2016). Since we assume a rigid triaxial mantle, this model is applicable to the Moon only once it has acquired its current shape, which probably happened before the Moon reached 25 Earth radii. While some details of the core dynamics depend on our assumptions about the shape of the lunar core-mantle boundary, we can report some robust preliminary findings. The presence of the core does not change significantly the evolutionary scenario of Cuk et al. (2016). The core and mantle are indeed decoupled, with the core having a much smaller obliquity to the ecliptic than the mantle for almost all of the lunar history. The core was largely in an equivalent of Cassini State 2, with the vernal equinoxes (wrt the ecliptic) of the core and the mantle being anti-aligned. The core-mantle spin axis offset has been very large during the Moon's first billion years (this is true both in canonical and high-inclination tidal evolution), causing the lunar core to be sub-synchronous. If the ancient lunar magnetic dipole was rotating around the core axis that was inclined to the Moon's spin axis, then the magnetic poles would move across

  11. Challenges Regarding IP Core Functional Reliability

    Science.gov (United States)

    Berg, Melanie D.; LaBel, Kenneth A.

    2017-01-01

    For many years, intellectual property (IP) cores have been incorporated into field programmable gate array (FPGA) and application specific integrated circuit (ASIC) design flows. However, the usage of large complex IP cores were limited within products that required a high level of reliability. This is no longer the case. IP core insertion has become mainstream including their use in highly reliable products. Due to limited visibility and control, challenges exist when using IP cores and subsequently compromise product reliability. We discuss challenges and suggest potential solutions to critical application IP insertion.

  12. Nuclear reactor core modelling in multifunctional simulators

    International Nuclear Information System (INIS)

    Puska, E.K.

    1999-01-01

    The thesis concentrates on the development of nuclear reactor core models for the APROS multifunctional simulation environment and the use of the core models in various kinds of applications. The work was started in 1986 as a part of the development of the entire APROS simulation system. The aim was to create core models that would serve in a reliable manner in an interactive, modular and multifunctional simulator/plant analyser environment. One-dimensional and three-dimensional core neutronics models have been developed. Both models have two energy groups and six delayed neutron groups. The three-dimensional finite difference type core model is able to describe both BWR- and PWR-type cores with quadratic fuel assemblies and VVER-type cores with hexagonal fuel assemblies. The one- and three-dimensional core neutronics models can be connected with the homogeneous, the five-equation or the six-equation thermal hydraulic models of APROS. The key feature of APROS is that the same physical models can be used in various applications. The nuclear reactor core models of APROS have been built in such a manner that the same models can be used in simulator and plant analyser applications, as well as in safety analysis. In the APROS environment the user can select the number of flow channels in the three-dimensional reactor core and either the homogeneous, the five- or the six-equation thermal hydraulic model for these channels. The thermal hydraulic model and the number of flow channels have a decisive effect on the calculation time of the three-dimensional core model and thus, at present, these particular selections make the major difference between a safety analysis core model and a training simulator core model. The emphasis on this thesis is on the three-dimensional core model and its capability to analyse symmetric and asymmetric events in the core. The factors affecting the calculation times of various three-dimensional BWR, PWR and WWER-type APROS core models have been

  13. Nuclear reactor core modelling in multifunctional simulators

    Energy Technology Data Exchange (ETDEWEB)

    Puska, E.K. [VTT Energy, Nuclear Energy, Espoo (Finland)

    1999-06-01

    The thesis concentrates on the development of nuclear reactor core models for the APROS multifunctional simulation environment and the use of the core models in various kinds of applications. The work was started in 1986 as a part of the development of the entire APROS simulation system. The aim was to create core models that would serve in a reliable manner in an interactive, modular and multifunctional simulator/plant analyser environment. One-dimensional and three-dimensional core neutronics models have been developed. Both models have two energy groups and six delayed neutron groups. The three-dimensional finite difference type core model is able to describe both BWR- and PWR-type cores with quadratic fuel assemblies and VVER-type cores with hexagonal fuel assemblies. The one- and three-dimensional core neutronics models can be connected with the homogeneous, the five-equation or the six-equation thermal hydraulic models of APROS. The key feature of APROS is that the same physical models can be used in various applications. The nuclear reactor core models of APROS have been built in such a manner that the same models can be used in simulator and plant analyser applications, as well as in safety analysis. In the APROS environment the user can select the number of flow channels in the three-dimensional reactor core and either the homogeneous, the five- or the six-equation thermal hydraulic model for these channels. The thermal hydraulic model and the number of flow channels have a decisive effect on the calculation time of the three-dimensional core model and thus, at present, these particular selections make the major difference between a safety analysis core model and a training simulator core model. The emphasis on this thesis is on the three-dimensional core model and its capability to analyse symmetric and asymmetric events in the core. The factors affecting the calculation times of various three-dimensional BWR, PWR and WWER-type APROS core models have been

  14. Sexuality in gynecological patients undergoing radiation therapy treatments

    International Nuclear Information System (INIS)

    Dolan, M.E.

    1987-01-01

    The gynecology patient undergoing radiation therapy treatments may experience physiological and psychological problems related to sexuality. The needs of this group must be met by the radiation oncology staff by their being informed, interested, and experienced in dealing with sexual problems created by radiation therapy treatments. Opportunities to obtain information and for discussion about how the disease and its treatments will affect sexual functioning must be provided for the patient and partner. It is important to remember that the ability to seek and preserve gratifying sexual function is of great importance to almost all women, regardless of age. The patient may feel much personal distress related to the disease, the treatments, and how they affect the way she feels as a sexual human being. Opportunities must be provided to share the feelings created by the treatment process and trained therapists should be available when intensive sexual counseling is needed

  15. Opportunistic microorganisms in patients undergoing antibiotic therapy for pulmonary tuberculosis

    Directory of Open Access Journals (Sweden)

    Silvia Maria Rodrigues Querido

    2011-12-01

    Full Text Available Antimicrobial therapy may cause changes in the resident oral microbiota, with the increase of opportunistic pathogens. The aim of this study was to compare the prevalence of Candida, Staphylococcus, Pseudomonas and Enterobacteriaceae in the oral cavity of fifty patients undergoing antibiotic therapy for pulmonary tuberculosis and systemically healthy controls. Oral rinsing and subgingival samples were obtained, plated in Sabouraud dextrose agar with chloramphenicol, mannitol agar and MacConkey agar, and incubated for 48 h at 37ºC. Candida spp. and coagulase-positive staphylococci were identified by phenotypic tests, C. dubliniensis, by multiplex PCR, and coagulase-negative staphylococci, Enterobacteriaceae and Pseudomonas spp., by the API systems. The number of Candida spp. was significantly higher in tuberculosis patients, and C. albicans was the most prevalent specie. No significant differences in the prevalence of other microorganisms were observed. In conclusion, the antimicrobial therapy for pulmonary tuberculosis induced significant increase only in the amounts of Candida spp.

  16. Should violent offenders be forced to undergo neurotechnological treatment?

    DEFF Research Database (Denmark)

    Petersen, Thomas Søbirk; Kragh, Kristian

    2017-01-01

    ’s right to freedom of thought. We argue that this objection can be challenged. First, we present some specifications of what a right to freedom of thought might mean. We focus on the recently published views of Jared Craig, and Jan Cristopher Bublitz and Reinhard Merkel. Secondly, we argue that forcing...... violent offenders to undergo certain kinds of NT may not violate the offender’s right to freedom of thought as that right is specified by Craig, and Bublitz and Merkel. Thirdly, even if non-consensual NT is used in a way that does violate freedom of thought, such use can be difficult to abandon without...... inconsistency. For if one is not an abolitionist, and therefore accepts traditional state punishments for violent offenders like imprisonment – which, the evidence shows, often violate the offender’s right to freedom of thought – then, it is argued, one will have reason to accept that violent offenders can...

  17. Study of alloy crystallization in systems undergoing peritectic transformations

    International Nuclear Information System (INIS)

    Psarev, V.I.; Kirij, V.G.; Kuznetsov, A.V.; Psareva, I.V.; Ivanov, A.L.

    1982-01-01

    Studies into Ge-Te, In-Te, Al-Mn, Sb-Zn, Sn-Au systems are carried out at melt cooling rates from 50 deg/h to 10 5 deg/h to establish regularities in stable and metastable crystallization of alloys undergoing peritectic transformations. Methods of metallographic, X-ray phase and X-ray diffraction analyses are used. Differentiation in types of peritectic transformations is made through their mechanisms under equilibrium and non-equilibrium crystallization conditions for various alloy systems. It is found out that ability to supercooling even at low or moderate cooling rates for Te-Ge and Te-In system melts can be one of the main indication of the possibility of amorphous alloy formation [ru

  18. WHO HAS TO UNDERGO CANCER GENETIC TESTING? A PERSPECTIVE.

    Directory of Open Access Journals (Sweden)

    Carmen Rinaldi

    2017-10-01

    Full Text Available Genetic testing is a medical tool employed to screen changes in genes linked to cancer and other genetic diseases. Genetic tests are available for breast, ovarian, colon, thyroid, and some other cancers and they represent the main tool for early identification of the “risk” subjects. The choice to undergo genetic testing by a healthy or affected cancer patient with family history of the cancer has to be the fruit of a careful and prudent assessment of the advantages and disadvantages discussed during oncogenetic counselling. The latter, in turn, in the case of a patient's positive and informed choice, must constantly affiliate the genetic testing, in order to preserve the prediction and information role of the test as much as possible.

  19. Quantifying risk of transfusion in children undergoing spine surgery.

    Science.gov (United States)

    Vitale, Michael G; Levy, Douglas E; Park, Maxwell C; Choi, Hyunok; Choe, Julie C; Roye, David P

    2002-01-01

    The risks and costs of transfusion are a great concern in the area of pediatric spine surgery, because it is a blood-intensive procedure with a high risk for transfusion. Therefore, determining the predictors of transfusion in this patient population is an important first step and has the potential to improve upon the current approaches to reducing transfusion rates. In this study, we reveal several predictors of transfusion in a pediatric patient population undergoing spine surgery. In turn, we present a general rule of thumb ("rule of two's") for gauging transfusion risk, thus enhancing the surgeon's approach to avoiding transfusion in certain clinical scenarios. This study was conducted to determine the main factors of transfusion in a population of pediatric patients undergoing scoliosis surgery. The goal was to present an algorithm for quantifying the true risk of transfusion for various patient groups that would highlight patients "at high risk" for transfusion. This is especially important in light of the various risks associated with undergoing a transfusion, as well as the costs involved in maintaining and disposing of exogenous blood materials. This is a retrospective review of a group of children who underwent scoliosis surgery between 1988 and 1995 at an academic institution. A total of 290 patients were analyzed in this study, of which 63 were transfused and 227 were not. No outcomes measures were used in this study. A retrospective review of 290 patients presenting to our institution for scoliosis surgery was conducted, with a focus on socioclinical data related to transfusion risk. Univariate analysis and logistic regression were used to quantify the determinants of transfusion risk. Univariate analysis identified many factors that were associated with the risk of transfusion. However, it is clear that several of these factors are dependent on each other, obscuring the true issues driving transfusion need. We used multivariate analysis to control for

  20. Liquid discharges from patients undergoing {sup 131}I treatments

    Energy Technology Data Exchange (ETDEWEB)

    Barquero, R. [Servicio de Radiofisica y Proteccion Radiologica, Hospital Universitario Rio Hortega, E-47010 Valladolid (Spain)], E-mail: rbarquero@hurh.sacyl.es; Basurto, F. [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, E-47010 Valladolid (Spain); Nunez, C. [Servicio de Radiofisica y Proteccion Radiologica, Fundacion Jimenez Diaz, FJD, E-82001 Madrid (Spain); Esteban, R. [Servicio de Radiologia, Hospital Clinico Universitario, E-47005 Valladolid (Spain)

    2008-10-15

    This work discusses the production and management of liquid radioactive wastes as excretas from patients undergoing therapy procedures with {sup 131}I radiopharmaceuticals in Spain. The activity in the sewage has been estimated with and without waste radioactive decay tanks. Two common therapy procedures have been considered, the thyroid cancer (4.14 GBq administered per treatment), and the hyperthyroidism (414 MBq administered per treatment). The calculations were based on measurements of external exposure around the 244 hyperthyroidism patients and 23 thyroid cancer patients. The estimated direct activity discharged to the sewage for two thyroid carcinomas and three hyperthyroidisms was 14.57 GBq and 1.27 GBq, respectively, per week; the annual doses received by the most exposed individual (sewage worker) were 164 {mu}Sv and 13 {mu}Sv, respectively. General equations to calculate the activity as a function of the number of patient treated each week were also obtained.

  1. Changes in preoperative characteristics in patients undergoing radical prostatectomy

    DEFF Research Database (Denmark)

    Røder, Martin Andreas; Brasso, Klaus; Christensen, Ib Jarle

    2014-01-01

    of a shift in attitude with increasing opportunistic PSA testing. This had led to an increasing number of RPs being performed in Denmark. The objective of this study was to analyze changes in preoperative characteristics over time for the complete cohort of 6489 men who underwent RP between 1995 and 2011....... Our hypothesis was that an increasing amount of men undergo RP for lower risk PCa. MATERIAL AND METHODS: All patients operated from 1995 to 2011 were identified via patient files and registries. Changes over time in age at surgery, preoperative PSA, clinical T-category, biopsy Gleason score (GS......, especially after 2005. Biopsy GS = 7 was found in 20.2% of the patients in 2005 compared to 57.1% in 2011. The proportion of T1 disease increased from 32% to 56%. Significant changes in percentage of patients according to the D'Amico classification were found. After 2005 the proportion of intermediate...

  2. Prevalence of Endometriosis Among Women Undergoing Laparoscopic Procedures

    Directory of Open Access Journals (Sweden)

    K. K. Chu

    1995-01-01

    Full Text Available We evaluated 752 patients for endometriosis in consecutive laparoscopic procedures over a one year period. Six hundred eighty patients underwent laparoscopy for indications unrelated to symptoms of endometriosis and 72 patients were diagnosed clinically to have endometriosis before the procedures. In the 72 patients with clinical indications of endometriosis, 59 patients had disease confirmed at surgery (82%. Out of 680 asymptomatic patients, 186 patients (24.7% were documented to have the disease of various characteristics or appearances in which the typical lesions accounted for 42%. The overall prevalence among these women undergoing laparoscopy was 32.5%. However, a prevalence of 12% was shown in a subset of asymptomatic patients indicated for sterilization. This may reflect the appropriate prevalence in reproductive age population.

  3. Epidemiological evaluation of hepatic trauma victims undergoing surgery.

    Science.gov (United States)

    Kalil, Mitre; Amaral, Isaac Massaud Amim

    2016-02-01

    to evaluate the epidemiological variables and diagnostic and therapeutic modalities related to hepatic trauma patients undergoing laparotomy in a public referral hospital in the metropolitan region of Vitória-ES. we conducted a retrospective study, reviewing charts of trauma patients with liver injuries, whether isolated or in association with other organs, who underwent exploratory laparotomy, from January 2011 to December 2013. We studied 392 patients, 107 of these with liver injury. The male: female ratio was 6.6 : 1 and the mean age was 30.12 years. Penetrating liver trauma occurred in 78.5% of patients, mostly with firearms. Associated injuries occurred in 86% of cases and intra-abdominal injuries were more common in penetrating trauma (p trauma was 60%, and penetrating trauma, 87.5% (p trauma remain high, especially in patients suffering from blunt trauma in relation to penetrating one.

  4. Frequency of renal artery stenosis in patients undergoing cardiac catheterization

    International Nuclear Information System (INIS)

    Lashari, M.N.; Ahmed, R.; Soomro, K.; Ishaq, M.

    2009-01-01

    Due to scarcity of local data regarding frequency of Renal Artery Stenosis (RAS), it is important to perform simultaneous renal arteriography in Patients undergoing coronary arterteriography for suspected coronary artery disease (CAD), in order to recognize all potential candidates for renal artery stenosis. It is cross sectional study. Three hundred patients, 157 male and 143 female with average age of 56+-8 Years and 55+-7 years respectively underwent simultaneous coronary and renal arteriography. Renal artery stenosis (RAS) was identified in 23.6% patients. Significant RAS (>50%) was present in 15% of patients. Hypertension, Dyslipidemia, smoking and diabetes mellitus were present in 88%, 80%, 50% and 49% respectively. Three vessel, two vessel and single vessel disease were seen in 58 %, 36% and 6% of patients. It is important to do simultaneous coronary and renal arteriography especially in patient having multiple risk factors and multi vessel coronary artery disease. (author)

  5. Frequency of renal artery stenosis in patients undergoing cardiac catheterization

    Energy Technology Data Exchange (ETDEWEB)

    Lashari, M N; Ahmed, R; Soomro, K; Ishaq, M [Civil Hospital, Karachi (Pakistan)

    2009-07-15

    Due to scarcity of local data regarding frequency of Renal Artery Stenosis (RAS), it is important to perform simultaneous renal arteriography in Patients undergoing coronary arterteriography for suspected coronary artery disease (CAD), in order to recognize all potential candidates for renal artery stenosis. It is cross sectional study. Three hundred patients, 157 male and 143 female with average age of 56+-8 Years and 55+-7 years respectively underwent simultaneous coronary and renal arteriography. Renal artery stenosis (RAS) was identified in 23.6% patients. Significant RAS (>50%) was present in 15% of patients. Hypertension, Dyslipidemia, smoking and diabetes mellitus were present in 88%, 80%, 50% and 49% respectively. Three vessel, two vessel and single vessel disease were seen in 58 %, 36% and 6% of patients. It is important to do simultaneous coronary and renal arteriography especially in patient having multiple risk factors and multi vessel coronary artery disease. (author)

  6. Radiation dose rates from adult patients undergoing nuclear medicine investigations

    International Nuclear Information System (INIS)

    Mountford, P.J.; O'Doherty, M.J.; Forge, N.I.; Jeffries, A.; Coakley, A.J.

    1991-01-01

    Adult patients undergoing nuclear medicine investigations may subsequently come into close contact with members of the public and hospital staff. In order to expand the available dosimetry and derive appropriate recommendations, dose rates were measured at 0.1, 0.5 and 1.0 m from 80 adult patients just before they left the nuclear medicine department after undergoing one of eight 99 Tc m studies, an 123 I thyroid, an 111 In leucocyte or a 201 Tl cardiac scan. The maximum departure dose rates at these distances of 150, 30 and 7.3 μSv h -1 were greater than those found in similar published studies of adult and paediatric patients. To limit the dose to an infant to less than 1 mSv, an 111 In leucocyte scan is the only investigation for which it may be necessary to restrict close contact between the infant and a radioactive parent, depending on the dose rate near the surface of the patient, the parent's habits and how fretful is the infant. It is unlikely that a ward nurse will receive a dose of 60 μSv in a working day if caring for just one radioactive adult patient, unless the patient is classified as totally helpless and had undergone a 99 Tc m marrow, bone or brain scan. The data and revised calculations of effective exposure times based on a total close contact time of 9 h in every 24 h period should allow worst case estimates of radiation dose to be made and recommendations to be formulated for other circumstances, including any future legislative changes in dose limits or derived levels. (author)

  7. The significance of peripartum fever in women undergoing vaginal deliveries.

    Science.gov (United States)

    Bensal, Adi; Weintraub, Adi Y; Levy, Amalia; Holcberg, Gershon; Sheiner, Eyal

    2008-10-01

    We investigated whether patients undergoing vaginal delivery who developed peripartum fever (PPF) had increased rates of other gestational complications. A retrospective study was undertaken comparing pregnancy complications of patients who developed PPF with those who did not. A multivariable logistic regression model was constructed to control for confounders. To avoid ascertainment bias, the year of birth was included in the model. Women who underwent cesarean delivery and those with multiple pregnancies were excluded from the study. During the study period, there were 169,738 singleton vaginal deliveries, and 0.4% of the women suffered from PPF. Hypertensive disorders, induction of labor, dystocia of labor in the second stage, suspected fetal distress, meconium-stained amniotic fluid, postpartum hemorrhage, manual lysis of a retained placenta, and revision of the uterine cavity and cervix were found to be independently associated with PPF by multivariable analysis. Year of birth was found to be a risk factor for fever. Apgar scores lower than 7 at 1 but not 5 minutes were significantly higher in the PPF group. Perinatal mortality rates were significantly higher among women with PPF (6.7% versus 1.3%, odds ratio [OR] = 5.4; 95% confidence interval [CI] 3.9 to 7.3; P < 0.001). Using another multivariable analysis, with perinatal mortality as the outcome variable, PPF was found as an independent risk factor for perinatal mortality (OR = 2.9; 95% CI 1.9 to 4.6; P < 0.001). PPF in women undergoing vaginal deliveries is associated with adverse perinatal outcomes and specifically is an independent risk factor for perinatal mortality.

  8. Clinical outcomes of patients with hypothyroidism undergoing percutaneous coronary intervention

    Science.gov (United States)

    Zhang, Ming; Sara, Jaskanwal D.S.; Matsuzawa, Yasushi; Gharib, Hossein; Bell, Malcolm R.; Gulati, Rajiv; Lerman, Lilach O.

    2016-01-01

    Abstract Aims The aim of this study was to investigate the association between hypothyroidism and major adverse cardiovascular and cerebral events (MACCE) in patients undergoing percutaneous coronary intervention (PCI). Methods and results Two thousand four hundred and thirty patients who underwent PCI were included. Subjects were divided into two groups: hypothyroidism ( n = 686) defined either as a history of hypothyroidism or thyroid-stimulating hormone (TSH) ≥5.0 mU/mL, and euthyroidism ( n = 1744) defined as no history of hypothyroidism and/or 0.3 mU/mL ≤ TSH hypothyroidism were further categorized as untreated ( n = 193), or those taking thyroid replacement therapy (TRT) with adequate replacement (0.3 mU/mL ≤ TSH hypothyroidism compared with those with euthyroidism (MACCE: HR: 1.28, P = 0.0001; myocardial infarction (MI): HR: 1.25, P = 0.037; heart failure: HR: 1.46, P = 0.004; revascularization: HR: 1.26, P = 0.0008; stroke: HR: 1.62, P = 0.04). Compared with untreated patients or those with inadequate replacement, adequately treated hypothyroid patients had a lower risk of MACCE (HR: 0.69, P = 0.005; HR: 0.78, P = 0.045), cardiac death (HR: 0.43, P = 0.008), MI (HR: 0.50, P = 0.0004; HR: 0.60, P = 0.02), and heart failure (HR: 0.50, P = 0.02; HR: 0.52, P = 0.017). Conclusion Hypothyroidism is associated with a higher incidence of MACCE compared with euthyroidism in patients undergoing PCI. Maintaining adequate control on TRT is beneficial in preventing MACCE. PMID:26757789

  9. Quality of Life in Elderly Cancer Patients Undergoing Chemotherapy.

    Science.gov (United States)

    Lavdaniti, Maria; Zyga, Sofia; Vlachou, Eugenia; Sapountzi-Krepia, Despina

    2017-01-01

    As life expectancy increases, it is expected that 60% of all cases of cancer will be detected in elderly patients in the next two decades. Cancer treatment for older persons is complicated by a number of factors, thus negatively affecting patients' quality of life. The purpose of this study is to investigate quality of life in elderly cancer patients undergoing chemotherapy. This study was descriptive and non-experimental. It was conducted in one large hospital in a major city of Northern Greece. The sample was convenience comprising 53 elderly cancer patients undergoing cycle 3 chemotherapy. The data was collected using the Functional Assessment of Cancer Therapy scale and included questions related to demographic and clinical characteristics. The majority of participants were men (n = 27, 50.9%) who were married (n = 32, 79.5%). Their mean age was 70.07 ± 3.60. Almost half of the sample (n = 30, 56.6%) had colon cancer. There was a statistical significant difference between men and women pertaining to physical wellbeing (p = 0.004) and overall quality of life (p family wellbeing (p = 0.029), functional wellbeing (p = 0.09) and overall quality of life (p family wellbeing (p = 0.029). These findings call attention to quality of life and its related factors in elderly cancer patients. It is highly recommended to envisage measures for improving quality of life in this group of cancer patients.

  10. Psychological determinants of life satisfaction in women undergoing infertility treatment

    Directory of Open Access Journals (Sweden)

    Aleksandra Anna Dembińska

    2016-01-01

    Full Text Available Background Infertility treatment is a long-term process, spread out over months, or even years, and carries no guarantee of success. It generates an incessant state of uncertainty which becomes a chronic state of psychological discomfort. Each stage of treatment may become a source of more trouble. Women deciding to undergo infertility treatment are exposed to many negative feelings concerning different aspects of their life. Participants and procedure The present study was an attempt to understand psychological determinants of life satisfaction in women undergoing infertility treatment. The study group included 470 women treated for infertility. Results Patients perceiving more social support in general, as well as more of the support types used in the study, i.e. emotional, instrumental, informational and institutional support, and support from family and friends, have better self-esteem, higher acceptance of their infertility, higher satisfaction with life, higher hope as an emotional state, and lower levels of anxiety and depression. Three negative emotional states, i.e. anxiety, depression and irritation, are predictors influencing (lowering life satisfaction of women struggling with infertility. The strongest of these predictors is depression, which is also a factor lowering the acceptance of one’s own infertility. The conducted analyses revealed that predictors influencing the life satisfaction of patients treated for infertility are self-esteem and acceptance of one’s own infertility (apart from the aforementioned emotional state – anxiety, depression, irritation. It was found that the higher the self-esteem and acceptance of one’s own infertility, the higher was the satisfaction with life. Conclusions Knowledge of these determinants is extremely valuable for medical personnel conducting treatments, because, according to many studies, the psychological state of women suffering from procreation problems is connected not only with

  11. Emotional state and coping style among gynecologic patients undergoing surgery.

    Science.gov (United States)

    Matsushita, Toshiko; Murata, Hinako; Matsushima, Eisuke; Sakata, Yu; Miyasaka, Naoyuki; Aso, Takeshi

    2007-02-01

    The aim of the present study was to investigate changes in emotional state and the relationship between emotional state and demographic/clinical factors and coping style among gynecologic patients undergoing surgery. Using the Japanese version of the Profile of Mood States (POMS), 90 patients (benign disease: 32, malignancy: 58) were examined on three occasions: before surgery, before discharge, and 3 months after discharge. They were also examined using the Coping Inventory for Stressful Situations (CISS) on one occasion before discharge. The scores for the subscales depression, anger, and confusion were the highest after discharge while those for anxiety were the highest before surgery. The average scores of the POMS subscales for all subjects were within the normal range. With regard to the relationship between these emotional states and other factors, multiple regressions showed that the principal determinants of anxiety before surgery were religious belief, psychological symptoms during hospitalization and emotion-oriented (E) coping style; further, it was found that depression after discharge could be explained by chemotherapy, duration of hospitalization, and E coping style. The principal determinants of anger after discharge and vigor before surgery were length of education and E coping style, and severity of disease, chemotherapy, E coping style and task-oriented coping style, respectively. Those of post-discharge fatigue and confusion were length of education, psychological symptoms, and E coping style. In summary it is suggested that the following should be taken into account in patients undergoing gynecologic surgery: anxiety before surgery, depression, anger, and confusion after surgery, including coping styles.

  12. A nonaffine network model for elastomers undergoing finite deformations

    Science.gov (United States)

    Davidson, Jacob D.; Goulbourne, N. C.

    2013-08-01

    In this work, we construct a new physics-based model of rubber elasticity to capture the strain softening, strain hardening, and deformation-state dependent response of rubber materials undergoing finite deformations. This model is unique in its ability to capture large-stretch mechanical behavior with parameters that are connected to the polymer chemistry and can also be easily identified with the important characteristics of the macroscopic stress-stretch response. The microscopic picture consists of two components: a crosslinked network of Langevin chains and an entangled network with chains confined to a nonaffine tube. These represent, respectively, changes in entropy due to thermally averaged chain conformations and changes in entropy due to the magnitude of these conformational fluctuations. A simple analytical form for the strain energy density is obtained using Rubinstein and Panyukov's single-chain description of network behavior. The model only depends on three parameters that together define the initial modulus, extent of strain softening, and the onset of strain hardening. Fits to large stretch data for natural rubber, silicone rubber, VHB 4905 (polyacrylate rubber), and b186 rubber (a carbon black-filled rubber) are presented, and a comparison is made with other similar constitutive models of large-stretch rubber elasticity. We demonstrate that the proposed model provides a complete description of elastomers undergoing large deformations for different applied loading configurations. Moreover, since the strain energy is obtained using a clear set of physical assumptions, this model may be tested and used to interpret the results of computer simulation and experiments on polymers of known microscopic structure.

  13. Performance of PROMIS for Healthy Patients Undergoing Meniscal Surgery.

    Science.gov (United States)

    Hancock, Kyle J; Glass, Natalie; Anthony, Chris A; Hettrich, Carolyn M; Albright, John; Amendola, Annunziato; Wolf, Brian R; Bollier, Matthew

    2017-06-07

    The Patient-Reported Outcomes Measurement Information System (PROMIS) was developed as an extensive question bank with multiple health domains that could be utilized for computerized adaptive testing (CAT). In the present study, we investigated the use of the PROMIS Physical Function CAT (PROMIS PF CAT) in an otherwise healthy population scheduled to undergo surgery for meniscal injury with the hypotheses that (1) the PROMIS PF CAT would correlate strongly with patient-reported outcome instruments that measure physical function and would not correlate strongly with those that measure other health domains, (2) there would be no ceiling effects, and (3) the test burden would be significantly less than that of the traditional measures. Patients scheduled to undergo meniscal surgery completed the PROMIS PF CAT, Knee injury and Osteoarthritis Outcome Score (KOOS), Marx Knee Activity Rating Scale, Short Form-36 (SF-36), and EuroQol-5 Dimension (EQ-5D) questionnaires. Correlations were defined as high (≥0.7), high-moderate (0.61 to 0.69), moderate (0.4 to 0.6), moderate-weak (0.31 to 0.39), or weak (≤0.3). If ≥15% respondents to a patient-reported outcome measure obtained the highest or lowest possible score, the instrument was determined to have a significant ceiling or floor effect. A total of 107 participants were analyzed. The PROMIS PF CAT had a high correlation with the SF-36 Physical Functioning (PF) (r = 0.82, p ceiling effects, with 0% of the participants achieving the lowest and highest score, respectively. The PROMIS PF CAT correlates strongly with currently used patient-reported outcome measures of physical function and demonstrates no ceiling effects for patients with meniscal injury requiring surgery. It may be a reasonable alternative to more burdensome patient-reported outcome measures.

  14. Preoperative autologous plateletpheresis in patients undergoing open heart surgery.

    Science.gov (United States)

    Tomar, Akhlesh S; Tempe, Deepak K; Banerjee, Amit; Hegde, Radhesh; Cooper, Andrea; Khanna, S K

    2003-07-01

    Blood conservation is an important aspect of care provided to the patients undergoing cardiac operations with cardiopulmonary bypass (CPB). It is even more important in patients with anticipated prolonged CPB, redo cardiac surgery, patients having negative blood group and in patients undergoing emergency cardiac surgery. In prolonged CPB the blood is subjected to more destruction of important coagulation factors, in redo surgery the separation of adhesions leads to increased bleeding and difficulty in achieving the haemostasis and in patients with negative blood group and emergency operations, the availability of sufficient blood can be a problem. Harvesting the autologous platelet rich plasma (PRP) can be a useful method of blood conservation in these patients. The above four categories of patients were prospectively studied, using either autologous whole blood donation or autologous platelet rich plasma (PRP) harvest in the immediate pre-bypass period. Forty two patients were included in the study and randomly divided into two equal groups of 21 each, control group (Group I) in which one unit of whole blood was withdrawn, and PRP group (Group II) where autologous plateletpheresis was utilised. After reversal of heparin, autologous whole blood was transfused in the control group and autologous PRP was transfused in the PRP group. The chest tube drainage and the requirement of homologous blood and blood products were recorded. Average PRP harvest was 643.33 +/- 133.51 mL in PRP group and the mean whole blood donation was 333.75 +/- 79.58 mL in the control group. Demographic, preoperative and intra operative data showed no statistically significant differences between the two groups. The PRP group patients drained 26.44% less (pblood products (pconservation in terms of better haemostasis, and less requirement of blood and blood products in the postoperative period as compared with the autologous whole blood donation. This technique can be especially useful in the

  15. Comparison of facility characteristics between SCTF Core-I and Core-II

    International Nuclear Information System (INIS)

    Adachi, Hiromichi; Iwamura, Takamichi; Sobajima, Makoto; Ohnuki, Akira; Abe, Yutaka; Murao, Yoshio.

    1990-08-01

    The Slab Core Test Facility (SCTF) was constructed to investigate two-dimensional thermal-hydraulics in the core and fluid behavior of carryover water out of the core including its feed-back effect to the core behavior mainly during the reflood phase of a large break loss-of-coolant accident (LOCA) of a pressurized water reactor (PWR). Since three simulated cores are used in the SCTF Test Program and the design of these three cores are slightly different one by one, repeatability test is required to justify a direct comparison of data obtained with different cores. In the present report, data of Test S2-13 (Run 618) obtained with SCTF Core-II were compared with those of Test S1-05 (Run 511) obtained with the Core-I, which were performed under the forced-flooding condition. Thermal-hydraulic behaviors in these two tests showed quite similar characteristics of both system behavior and two-dimensional core behaviors. Therefore, the test data obtained from the two cores can be compared directly with each other. After the turnaround of clad temperatures, however, some differences were found in upper plenum water accumulation and resultant two-dimensional core cooling behaviors such as quench front propagation from bottom to top of the core. (author)

  16. In-core Instrument Subcritical Verification (INCISV) - Core Design Verification Method - 358

    International Nuclear Information System (INIS)

    Prible, M.C.; Heibel, M.D.; Conner, S.L.; Sebastiani, P.J.; Kistler, D.P.

    2010-01-01

    According to the standard on reload startup physics testing, ANSI/ANS 19.6.1, a plant must verify that the constructed core behaves sufficiently close to the designed core to confirm that the various safety analyses bound the actual behavior of the plant. A large portion of this verification must occur before the reactor operates at power. The INCISV Core Design Verification Method uses the unique characteristics of a Westinghouse Electric Company fixed in-core self powered detector design to perform core design verification after a core reload before power operation. A Vanadium self powered detector that spans the length of the active fuel region is capable of confirming the required core characteristics prior to power ascension; reactivity balance, shutdown margin, temperature coefficient and power distribution. Using a detector element that spans the length of the active fuel region inside the core provides a signal of total integrated flux. Measuring the integrated flux distributions and changes at various rodded conditions and plant temperatures, and comparing them to predicted flux levels, validates all core necessary core design characteristics. INCISV eliminates the dependence on various corrections and assumptions between the ex-core detectors and the core for traditional physics testing programs. This program also eliminates the need for special rod maneuvers which are infrequently performed by plant operators during typical core design verification testing and allows for safer startup activities. (authors)

  17. Data Acquisition Backbone Core DABC

    International Nuclear Information System (INIS)

    Adamczewski, J; Essel, H G; Kurz, N; Linev, S

    2008-01-01

    For the new experiments at FAIR new concepts of data acquisition systems have to be developed like the distribution of self-triggered, time stamped data streams over high performance networks for event building. The Data Acquisition Backbone Core (DABC) is a software package currently under development for FAIR detector tests, readout components test, and data flow investigations. All kinds of data channels (front-end systems) are connected by program plug-ins into functional components of DABC like data input, combiner, scheduler, event builder, analysis and storage components. After detailed simulations real tests of event building over a switched network (InfiniBand clusters with up to 110 nodes) have been performed. With the DABC software more than 900 MByte/s input and output per node can be achieved meeting the most demanding requirements. The software is ready for the implementation of various test beds needed for the final design of data acquisition systems at FAIR. The development of key components is supported by the FutureDAQ project of the European Union (FP6 I3HP JRA1)

  18. Prismatic Core Coupled Transient Benchmark

    International Nuclear Information System (INIS)

    Ortensi, J.; Pope, M.A.; Strydom, G.; Sen, R.S.; DeHart, M.D.; Gougar, H.D.; Ellis, C.; Baxter, A.; Seker, V.; Downar, T.J.; Vierow, K.; Ivanov, K.

    2011-01-01

    The Prismatic Modular Reactor (PMR) is one of the High Temperature Reactor (HTR) design concepts that have existed for some time. Several prismatic units have operated in the world (DRAGON, Fort St. Vrain, Peach Bottom) and one unit is still in operation (HTTR). The deterministic neutronics and thermal-fluids transient analysis tools and methods currently available for the design and analysis of PMRs have lagged behind the state of the art compared to LWR reactor technologies. This has motivated the development of more accurate and efficient tools for the design and safety evaluations of the PMR. In addition to the work invested in new methods, it is essential to develop appropriate benchmarks to verify and validate the new methods in computer codes. The purpose of this benchmark is to establish a well-defined problem, based on a common given set of data, to compare methods and tools in core simulation and thermal hydraulics analysis with a specific focus on transient events. The benchmark-working group is currently seeking OECD/NEA sponsorship. This benchmark is being pursued and is heavily based on the success of the PBMR-400 exercise.

  19. Energy integration into core businesses

    Energy Technology Data Exchange (ETDEWEB)

    Styan, G. [Tolko Industries Ltd., Castlegar, BC (Canada)

    2005-07-01

    An outline of Tolko Industries was presented with reference to their recent focus on biomass energy conversion. Tolko Industries has doubled its size twice over the last 10 year period, and now owns co-generation facilities and electrical generation contracts, along with significant capital investments. Current energy assets of the company are focused on process steam/heat energy with 3 small co-generation facilities. It was suggested that projects displacing natural gas have had the highest potential energy payback in Tolko facilities. A residuals summary for hog fuel, chips, and sawdust and shavings was presented. The company's core business focus is on sawmills, OSB, veneer, plywood and kraft paper. The company also has access to a large volume of biomass. Details of the Tolko's Nexterra Biomass Gasification Project were presented, along with details of the working scale pilot and phased in proposal plans. It was noted that Nexterra now produces enough biomass on site to be self-sufficient throughout its entire operational process. Tolko's expanded use of biomass technology to address emission abatement has resulted in funding from Enercan. Details of greenhouse gas (GHG) offsets were provided. It was concluded that efficient energy use and cost of supply creates a competitive advantage in the manufacturing industry. The Kyoto Protocol has provided advantages for biomass fuel development. tabs., figs.

  20. Reactor core design aiding system

    International Nuclear Information System (INIS)

    Kanazawa, Nobuhiro; Hamaguchi, Yukio; Nakao, Takashi; Kondo, Yasuhide

    1995-01-01

    A two-dimensional radial power distribution and an axial one-dimensional power distribution are determined based on a distribution of a three-dimensional infinite multiplication factor, to obtain estimated power distribution estimation values. The estimation values are synthesized to obtain estimated three-dimensional power distribution values. In addition, the distribution of a two-dimensional radial multiplication factor and the distribution of an one-dimensional axial multiplication factor are determined based on the three-dimensional power distribution, to obtain estimated values for the multiplication factor distribution. The estimated values are synthesized to form estimated values for the three-dimensional multiplication factor distribution. Further, estimated fuel loading pattern value is determined based on the three-dimensional power distribution or the two-dimensional radial power distribution. Since the processes for determining the estimated values comprise only additive and multiplying operations, processing time can be remarkably saved compared with calculation based on a detailed physical models. Since the estimation is performed on every fuel assemblies, a nervous circuit network not depending on the reactor core system can be constituted. (N.H.)

  1. Drilling history core hole DC-4

    International Nuclear Information System (INIS)

    1978-12-01

    Core hole DC-4 was completed at a depth of 3998 feet in December, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Sicsson, Inc. furnished the engineering, daily supervision of the cable tool and core drilling activities, and geological core logging for DC-4. Core hole DC-4 is located on the Hanford Site about 3 miles east of the Yakima Barricade and approximately 103 feet southwest of rotary hole DC-5, which was completed to 3990 feet in February, 1978. Hanford Site coordinates reported for hole DC-4 are north 49,385.62 feet and west 85,207.63 feet, and Washington State coordinates are north 454,468.73 feet and east 2,209,990.87 feet. No elevation survey is available for hole DC-4, but it is approximately 745 feet above mean sea level based upon the survey of hole DC-5, which has a reported elevation of 745.16 feet on the top of the 3-inch flange. The purpose of core hole DC-4 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing, cross-hole seismic shear, and pressure wave velocity studies with rotary hole DC-5. Hole DC-4 was drilled through the overburden into basalt bedrock by cable tool methods (0-623 feet) and continuously cored through the final interval (623 to 3998 feet).Core recovery was 95.8 percent of the total footage cored

  2. Iron snow in the Martian core?

    Science.gov (United States)

    Davies, Christopher J.; Pommier, Anne

    2018-01-01

    The decline of Mars' global magnetic field some 3.8-4.1 billion years ago is thought to reflect the demise of the dynamo that operated in its liquid core. The dynamo was probably powered by planetary cooling and so its termination is intimately tied to the thermochemical evolution and present-day physical state of the Martian core. Bottom-up growth of a solid inner core, the crystallization regime for Earth's core, has been found to produce a long-lived dynamo leading to the suggestion that the Martian core remains entirely liquid to this day. Motivated by the experimentally-determined increase in the Fe-S liquidus temperature with decreasing pressure at Martian core conditions, we investigate whether Mars' core could crystallize from the top down. We focus on the "iron snow" regime, where newly-formed solid consists of pure Fe and is therefore heavier than the liquid. We derive global energy and entropy equations that describe the long-timescale thermal and magnetic history of the core from a general theory for two-phase, two-component liquid mixtures, assuming that the snow zone is in phase equilibrium and that all solid falls out of the layer and remelts at each timestep. Formation of snow zones occurs for a wide range of interior and thermal properties and depends critically on the initial sulfur concentration, ξ0. Release of gravitational energy and latent heat during growth of the snow zone do not generate sufficient entropy to restart the dynamo unless the snow zone occupies at least 400 km of the core. Snow zones can be 1.5-2 Gyrs old, though thermal stratification of the uppermost core, not included in our model, likely delays onset. Models that match the available magnetic and geodetic constraints have ξ0 ≈ 10% and snow zones that occupy approximately the top 100 km of the present-day Martian core.

  3. Inner core tilt and polar motion

    Science.gov (United States)

    Dumberry, Mathieu; Bloxham, Jeremy

    2002-11-01

    A tilted inner core permits exchange of angular momentum between the core and the mantle through gravitational and pressure torques and, as a result, changes in the direction of Earth's axis of rotation with respect to the mantle. We have developed a model to calculate the amplitude of the polar motion that results from an equatorial torque at the inner core boundary which tilts the inner core out of alignment with the mantle. We specifically address the issue of the role of the inner core tilt in the decade polar motion known as the Markowitz wobble. We show that a decade polar motion of the same amplitude as the observed Markowitz wobble requires a torque of 1020 N m which tilts the inner core by 0.07 degrees. This result critically depends on the viscosity of the inner core; for a viscosity less than 5 × 1017 Pa s, larger torques are required. We investigate the possibility that a torque of 1020 N m with decadal periodicity can be produced by electromagnetic coupling between the inner core and torsional oscillations of the flow in the outer core. We demonstrate that a radial magnetic field at the inner core boundary of 3 to 4 mT is required to obtain a torque of such amplitude. The resulting polar motion is eccentric and polarized, in agreement with the observations. Our model suggests that equatorial torques at the inner core boundary might also excite the Chandler wobble, provided there exists a physical mechanism that can generate a large torque at a 14 month period.

  4. DENSE MOLECULAR CORES BEING EXTERNALLY HEATED

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Gwanjeong; Lee, Chang Won; Kim, Mi-Ryang [Radio Astronomy division, Korea Astronomy and Space Science Institute, 776 Daedeokdae-ro, Yuseong-gu, Daejeon, 34055 (Korea, Republic of); Gopinathan, Maheswar [Aryabhatta Research Institute of Observational Sciences, Manora Peak, Nainital 263129 (India); Jeong, Woong-Seob, E-mail: archer81@kasi.re.kr [Department of Astronomy and Space Science, University of Science and Technology, 217 Gajungro, Yuseong-gu, Daejeon, 34113 (Korea, Republic of)

    2016-06-20

    We present results of our study of eight dense cores, previously classified as starless, using infrared (3–160 μ m) imaging observations with the AKARI telescope and molecular line (HCN and N{sub 2}H{sup +}) mapping observations with the KVN telescope. Combining our results with the archival IR to millimeter continuum data, we examined the starless nature of these eight cores. Two of the eight cores are found to harbor faint protostars having luminosities of ∼0.3–4.4 L {sub ⊙}. The other six cores are found to remain starless and probably are in a dynamically transitional state. The temperature maps produced using multi-wavelength images show an enhancement of about 3–6 K toward the outer boundary of these cores, suggesting that they are most likely being heated externally by nearby stars and/or interstellar radiation fields. Large virial parameters and an overdominance of red asymmetric line profiles over the cores may indicate that the cores are set into either an expansion or an oscillatory motion, probably due to the external heating. Most of the starless cores show a coreshine effect due to the scattering of light by the micron-sized dust grains. This may imply that the age of the cores is of the order of ∼10{sup 5} years, which is consistent with the timescale required for the cores to evolve into an oscillatory stage due to external perturbation. Our observational results support the idea that the external feedback from nearby stars and/or interstellar radiation fields may play an important role in the dynamical evolution of the cores.

  5. Intramolecular Redox-Mannich Reactions: Facile Access to the Tetrahydroprotoberberine Core.

    Science.gov (United States)

    Ma, Longle; Seidel, Daniel

    2015-09-07

    Cyclic amines such as pyrrolidine undergo redox-annulations with 2-formylaryl malonates. Concurrent oxidative amine α-CH bond functionalization and reductive N-alkylation render this transformation redox-neutral. This redox-Mannich process provides regioisomers of classic Reinhoudt reaction products as an entry to the tetrahydroprotoberberine core, enabling the synthesis of (±)-thalictricavine and its epimer. An unusually mild amine-promoted dealkoxycarbonylation was discovered in the course of these studies. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Interaction between core analysis methodology and nuclear design: some PWR examples

    International Nuclear Information System (INIS)

    Rothleder, B.M.; Eich, W.J.

    1982-01-01

    The interaction between core analysis methodology and nuclear design is exemplified by PSEUDAX, a major improvement related to the Advanced Recycle methodology program (ARMP) computer code system, still undergoing development by the Electric Power Research Institute. The mechanism of this interaction is explored by relating several specific nulcear design changes to the demands placed by these changes on the ARMP system, and by examining the meeting of these demands, first within the standard ARMP methodology and then through augmentation of the standard methodology by development of PSEUDAX

  7. Metallic nanoshells with semiconductor cores: optical characteristics modified by core medium properties.

    Science.gov (United States)

    Bardhan, Rizia; Grady, Nathaniel K; Ali, Tamer; Halas, Naomi J

    2010-10-26

    It is well-known that the geometry of a nanoshell controls the resonance frequencies of its plasmon modes; however, the properties of the core material also strongly influence its optical properties. Here we report the synthesis of Au nanoshells with semiconductor cores of cuprous oxide and examine their optical characteristics. This material system allows us to systematically examine the role of core material on nanoshell optical properties, comparing Cu(2)O core nanoshells (ε(c) ∼ 7) to lower core dielectric constant SiO(2) core nanoshells (ε(c) = 2) and higher dielectric constant mixed valency iron oxide nanoshells (ε(c) = 12). Increasing the core dielectric constant increases nanoparticle absorption efficiency, reduces plasmon line width, and modifies plasmon energies. Modifying the core medium provides an additional means of tailoring both the near- and far-field optical properties in this unique nanoparticle system.

  8. A core performance study on an actinide recycling 'zero-sodium-void worth' core

    International Nuclear Information System (INIS)

    Kawashima, M.; Nakagawa, M.; Yamaoka, M.; Kasahara, F.

    1994-01-01

    A core performance study was made for an absorber-type parfait core (A-APC) as one of 'Zero-sodium-void-worth' core concepts. This evaluation study pursued different two aspects; one for transuranic (TRU) management strategy, and another for a loss-of-coolant anticipated transient behavior considering the unique core configuration. The results indicated that this core has a large flexibility for actinide recycling in terms of self-sufficiency and minor actinide burning. The result also showed that this core has kept a large mitigation potential for ULOF events as well as a simple flat core concept, reflecting detailed three dimensional core bowing behavior for the A-APC configuration. (author)

  9. Experimental simulation of fragmentation and stratification of core debris on the core catcher of a fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Pillai, Dipin S.; Vignesh, R. [Indian Institute of Technology, Chennai, Tamil Nadu (India); Sudha, A. Jasmin, E-mail: jasmin@igcar.gov.in [Safety Engineering Division, Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India); Pushpavanam, S.; Sundararajan, T. [Indian Institute of Technology, Chennai, Tamil Nadu (India); Nashine, B.K.; Selvaraj, P. [Safety Engineering Division, Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India)

    2016-05-15

    Highlights: • Fragmentation of two simultaneous metals jets in a bulk coolant analysed. • Particle size from experiments compared with theoretical analysis. • Jet breakup modes explained using dimensionless numbers. • Settling aspects of aluminium and lead debris on collector plate studied. • Results analysed in light of core debris settling on core catcher in a FBR. - Abstract: The complex and coupled phenomena of two simultaneous molten metal jets fragmenting inside a quiescent liquid pool and settling on a collector plate are experimentally analysed in the context of safety analysis of a fast breeder reactor (FBR) in the post accident heat removal phase. Following a hypothetical core melt down accident in a FBR, a major portion of molten nuclear fuel and clad/structural material which are collectively termed as ‘corium’ undergoes fragmentation in the bulk coolant sodium in the lower plenum of the reactor main vessel and settles on the core catcher plate. The coolability of this decay heat generating debris bed is dependent on the particle size distribution and its layering i.e., stratification. Experiments have been conducted with two immiscible molten metals of different densities poured inside a coolant medium to understand their fragmentation behaviour and to assess the possibility of formation of a stratified debris bed. Molten aluminium and lead have been used as simulants in place of molten stainless steel and nuclear fuel to facilitate easy handling. This paper summarizes the major findings from these experiments. The fragmentation of the two molten metals are explained in the light of relevant dimensionless numbers such as Reynolds number and Weber Number. The mass median diameter of the fragmented debris is predicted from nonlinear stability analysis of slender jets for lead jet and using Rayleigh's classical theory of jet breakup for aluminium jet. The agreement of the predicted values with the experimental results is good. These

  10. Superrotation of Earth’s Inner Core, Extraterrestrial Impacts, and the Effective Viscosity of Outer Core

    OpenAIRE

    Pirooz Mohazzabi; John D. Skalbeck

    2015-01-01

    The recently verified superrotation of Earth’s inner core is examined and a new model is presented which is based on the tidal despinning of the mantle and the viscosity of the outer core. The model also takes into account other damping mechanisms arising from the inner core superrotation such as magnetic and gravitational coupling as well as contribution from eddy viscosity in the outer core. The effective viscosity obtained in this model confirms a previously well constrained value of about...

  11. Overview of core designs and requirements/criteria for core restraint systems

    International Nuclear Information System (INIS)

    Sutherland, W.H.

    1984-09-01

    The requirements and lifetime criteria for the design of a Liquid Metal Fast Breeder Reactor (LMFBR) Core Restraint System are presented. A discussion of the three types of core restraint systems used in LMFBR core design is given. Details of the core restraint system selected for FFTF are presented and the reasons for this selection given. Structural analysis procedures being used to manage the FFTF assembly irradiations are discussed. Efforts that are ongoing to validate the calculational methods and lifetime criteria are presented

  12. Lateral restraint assembly for reactor core

    Science.gov (United States)

    Gorholt, Wilhelm; Luci, Raymond K.

    1986-01-01

    A restraint assembly for use in restraining lateral movement of a reactor core relative to a reactor vessel wherein a plurality of restraint assemblies are interposed between the reactor core and the reactor vessel in circumferentially spaced relation about the core. Each lateral restraint assembly includes a face plate urged against the outer periphery of the core by a plurality of compression springs which enable radial preloading of outer reflector blocks about the core and resist low-level lateral motion of the core. A fixed radial key member cooperates with each face plate in a manner enabling vertical movement of the face plate relative to the key member but restraining movement of the face plate transverse to the key member in a plane transverse to the center axis of the core. In this manner, the key members which have their axes transverse to or subtending acute angles with the direction of a high energy force tending to move the core laterally relative to the reactor vessel restrain such lateral movement.

  13. Torsional Oscillations of the Earths's Core

    Science.gov (United States)

    Hide, Raymond; Boggs, Dale H.; Dickey, Jean O.

    1997-01-01

    Torsional oscillations of the Earth's liquid metallic outer core are investigated by diving the core into twenty imaginary e1qui-volume annuli coaxial with the axis of ratation of the Earth and determining temproal fluctuations in the axial component of angular memonetum of each annulus under the assumption of iso-rotation on cylindrical surfaces.

  14. Stable isotope analysis in ice core paleoclimatology

    International Nuclear Information System (INIS)

    Bertler, N.A.N.

    2015-01-01

    Ice cores from New Zealand and the Antarctic margin provide an excellent means of addressing the lack of longer-term climate observations in the Southern Hemisphere with near instrumental quality. Ice core records provide an annual-scale, 'instrumental-quality' baseline of atmospheric temperature and circulation changes back many thousands of years. (author).

  15. Stable isotope analysis in ice core paleoclimatology

    International Nuclear Information System (INIS)

    Bertler, N.A.N.

    2014-01-01

    Ice cores from New Zealand and the Antarctic margin provide an excellent means of addressing the lack of longer-term climate observations in the Southern Hemisphere with near instrumental quality. Ice core records provide an annual-scale, 'instrumental-quality' baseline of atmospheric temperature and circulation changes back many thousands of years. (author)

  16. Core Knowledge Confusions among University Students

    Science.gov (United States)

    Lindeman, Marjaana; Svedholm, Annika M.; Takada, Mikito; Lonnqvist, Jan-Erik; Verkasalo, Markku

    2011-01-01

    Previous studies have demonstrated that university students hold several paranormal beliefs and that paranormal beliefs can be best explained with core knowledge confusions. The aim of this study was to explore to what extent university students confuse the core ontological attributes of lifeless material objects (e.g. a house, a stone), living…

  17. Observations of exotic inner core waves

    NARCIS (Netherlands)

    Waszek, Lauren; Deuss, A.F.|info:eu-repo/dai/nl/412396610

    2015-01-01

    The seismic structure of Earth’s inner core is highly complex, displaying strong anisotropy and further regional variations. However, few seismic waves are sensitive to the inner core and fundamental questions regarding the origin of the observed seismic features remain unanswered. Thus, new

  18. Moving core beam energy absorber and converter

    Science.gov (United States)

    Degtiarenko, Pavel V.

    2012-12-18

    A method and apparatus for the prevention of overheating of laser or particle beam impact zones through the use of a moving-in-the-coolant-flow arrangement for the energy absorbing core of the device. Moving of the core spreads the energy deposition in it in 1, 2, or 3 dimensions, thus increasing the effective cooling area of the device.

  19. Method for refuelling a nuclear reactor core

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    This invention relates to an improved method for refuelling a nuclear reactor core inside a reactor vessel. The technique allows a substantial reduction in the refuelling time as compared with previously known methods and permits fewer out of core operations and smaller temporary storage space. (U.K.)

  20. Common Core in the Real World

    Science.gov (United States)

    Hess, Frederick M.; McShane, Michael Q.

    2013-01-01

    There are at least four key places where the Common Core intersects with current efforts to improve education in the United States--testing, professional development, expectations, and accountability. Understanding them can help educators, parents, and policymakers maximize the chance that the Common Core is helpful to these efforts and, perhaps…

  1. Reactor core for LMFBR type reactors

    International Nuclear Information System (INIS)

    Masumi, Ryoji; Azekura, Kazuo; Kurihara, Kunitoshi; Bando, Masaru; Watari, Yoshio.

    1987-01-01

    Purpose: To reduce the power distribution fluctuations and obtain flat and stable power distribution throughout the operation period in an LMFBR type reactor. Constitution: In the inner reactor core region and the outer reactor core region surrounding the same, the thickness of the inner region is made smaller than the axial height of the reactor core region and the radial width thereof is made smaller than that of the reactor core region and the volume thereof is made to 30 - 50 % for the reactor core region. Further, the amount of the fuel material per unit volume in the inner region is made to 70 - 90 % of that in the outer region. The difference in the neutron infinite multiplication factor between the inner region and the outer region is substantially constant irrespective of the burnup degree and the power distribution fluctuation can be reduced to about 2/3, by which the effect of thermal striping to the reactor core upper mechanisms can be moderated. Further, the maximum linear power during operation can be reduced by 3 %, by which the thermal margin in the reactor core is increased and the reactor core fuels can be saved by 3 %. (Kamimura, M.)

  2. Future Seismic Constraints on Mercury's Core Composition

    Science.gov (United States)

    Knibbe, J. S.; Luginbhuel, S. M.; Rivoldini, A.; Kono, Y.; Van Hoolst, T.; van Westrenen, W.

    2018-05-01

    The composition of Mercury's large core is strongly linked to the planet's origin and magnetic field generation. We present P-wave velocity measurements for liquid Fe-Si and Fe-S metals. A future seismic mission can constrain the core composition.

  3. The Core Journal Concept in Black Studies

    Science.gov (United States)

    Weissinger, Thomas

    2010-01-01

    Black Studies scholars have shown interest in the core journal concept. Indeed, the idea of core journals for the study of the Black experience has changed several times since 1940. While Black Studies scholars are citing Black Studies journals with frequency, they also cite traditional disciplinary journals a great deal of the time. However,…

  4. On the collapse of iron stellar cores

    International Nuclear Information System (INIS)

    Barkat, Z.; Rakavy, G.; Reiss, Y.; Wilson, J.R.

    1975-01-01

    The collapse of iron stellar cores is investigated to see whether the outward shock produced by the bounce at neutron star density is sufficient to burn appreciable amounts of the envelope around the iron core. Several models were tried, and in all cases no appreciable burn took place; hence no explosion results from the collapse of these models

  5. Core sampling system spare parts assessment

    International Nuclear Information System (INIS)

    Walter, E.J.

    1995-01-01

    Soon, there will be 4 independent core sampling systems obtaining samples from the underground tanks. It is desirable that these systems be available for sampling during the next 2 years. This assessment was prepared to evaluate the adequacy of the spare parts identified for the core sampling system and to provide recommendations that may remediate overages or inadequacies of spare parts

  6. Integration of Biosafety into Core Facility Management

    Science.gov (United States)

    Fontes, Benjamin

    2013-01-01

    This presentation will discuss the implementation of biosafety policies for small, medium and large core laboratories with primary shared objectives of ensuring the control of biohazards to protect core facility operators and assure conformity with applicable state and federal policies, standards and guidelines. Of paramount importance is the educational process to inform core laboratories of biosafety principles and policies and to illustrate the technology and process pathways of the core laboratory for biosafety professionals. Elevating awareness of biohazards and the biosafety regulatory landscape among core facility operators is essential for the establishment of a framework for both project and material risk assessment. The goal of the biohazard risk assessment process is to identify the biohazard risk management parameters to conduct the procedure safely and in compliance with applicable regulations. An evaluation of the containment, protective equipment and work practices for the procedure for the level of risk identified is facilitated by the establishment of a core facility registration form for work with biohazards and other biological materials with potential risk. The final step in the biocontainment process is the assumption of Principal Investigator role with full responsibility for the structure of the site-specific biosafety program plan by core facility leadership. The presentation will provide example biohazard protocol reviews and accompanying containment measures for core laboratories at Yale University.

  7. An analysis of the uniform core experiment

    Energy Technology Data Exchange (ETDEWEB)

    Waterson, R H

    1973-10-15

    This report describes an analysis of the Uniform Core of HITREX using the WIMS E codes, and presents the results of theory/experiment comparisons. The overall picture is one of good agreement for core reaction rate distributions, but theory umderestimating k{sub eff} by about 1.5% {delta}k/k.

  8. Core barrel motion calibration factor calculation

    International Nuclear Information System (INIS)

    Shahrokhi, F.; Robinson, J.C.

    1976-01-01

    Neutron transport theory calculations were performed to obtain a calibration factor for inferring core-barrel motion from spectral density data using excore ionization chambers in PWRs. The analysis of core-barrel movement was based on the postulate that the movement is a cantilevered type, with the preferred direction x-x'

  9. Subharmonic excitation in an HTGR core

    International Nuclear Information System (INIS)

    Bezler, P.; Curreri, J.R.

    1977-01-01

    The occurrence of subharmonic resonance in a series of blocks with clearance between blocks and with springs on the outer most ends is the subject of this paper. This represents an HTGR core response to an earthquake input. An analytical model of the cross section of this type of core is a series of blocks arranged horizontally between outer walls. Each block represents many graphite hexagonal core elements acting in unison as a single mass. The blocks are of unequal size to model the true mass distribution through the core. Core element elasticity and damping characteristics are modeled with linear spring and viscous damping units affixed to each block. The walls and base represent the core barell or core element containment structure. For forced response calculations, these boundaries are given prescribed motions. The clearance between each block could be the same or different with the total clearance duplicating that of the entire core. Spring packs installed between the first and last block and the boundaries model the boundary elasticity. The system non-linearity is due to the severe discontinuity in the interblock elastic forces when adjacent blocks collide. A computer program using a numerical integration scheme was developed to solve for the response of the system to arbitrary inputs

  10. Apparatus for measurement of tree core density

    International Nuclear Information System (INIS)

    Blincow, D.W.

    1975-01-01

    Apparatus is described for direct measurement of the density of a core sample from a tree. A radiation source and detector with a receptacle for the core therebetween, an integrator unit for the detector output, and an indicating meter driven by the integrator unit are described

  11. Core Science Systems--Mission overview

    Science.gov (United States)

    Gallagher, Kevin T.

    2012-01-01

    The Core Science Systems Mission Area delivers nationally focused Earth systems and information science that provides fundamental research and data that underpins all Mission Areas of the USGS, the USGS Science Strategy, and Presidential, Secretarial, and societal priorities. —Kevin T. Gallagher, Associate Director, Core Science Systems

  12. UV Defined Nanoporous Liquid Core Waveguides

    DEFF Research Database (Denmark)

    Christiansen, Mads Brøkner; Gopalakrishnan, Nimi; Ndoni, Sokol

    2011-01-01

    Nanoporous liquid core waveguides, where both core and cladding are made from the same material, are presented. The nanoporous polymer used is intrinsically hydrophobic, but selective UV exposure enables it to infiltrate with an aqueous solution, thus raising the refractive index from 1.26 to 1...

  13. Design study on metal fuel FBR cores

    International Nuclear Information System (INIS)

    Yokoo, T.; Tanaka, Y.; Ogata, T.

    1991-01-01

    A design approach for metal fuel FBR core to maintain fuel integrity during transient events by limiting eutectic/liquid phase formation is proposed based on the current status of metallic fuel development. Its impact as the limitation on the core outlet temperature is assessed through its application to two of CRIEPI's core concepts, high linear power 1000 MWe homogeneous design and medium linear power 300 MWe radially heterogeneous design. SESAME/SALT code is used in this study to analyze steady state and transient fuel behavior. SE2-FA code is developed based on SUPERENERGY-2 and used to analyze core thermal-hydraulics with uncertainties. As the result, the core outlet temperatures of both designs are found to be limited to ≤500degC if it is required to prevent eutectic/liquid phase formation during operational transients in order to guarantee the fuel integrity. Additional assessment is made assuming an advanced limiting condition that allows small liquid phase formation based on the liquid phase penetration rate derived from existing experimental results. The result indicates possibility of raising core outlet temperature to ∼ 530degC. Also, it is found that core design technology improvements such as hot spot factors reduction can contribute to the core outlet temperature extension by 10 ∼ 20degC. (author)

  14. Kinematically Decoupled Cores in Dwarf (Elliptical) Galaxies

    NARCIS (Netherlands)

    Toloba, E.; Peletier, R. F.; Guhathakurta, P.; van de Ven, G.; Boissier, S.; Boselli, A.; Brok, M. d.; Falcón-Barroso, J.; Hensler, G.; Janz, J.; Laurikainen, E.; Lisker, T.; Paudel, S.; Ryś, A.; Salo, H.

    An overview is given of what we know about the frequency of kinematically decoupled cores in dwarf elliptical galaxies. New observations show that kinematically decoupled cores happen just as often in dwarf elliptical as in ordinary early-type galaxies. This has important consequences for the

  15. Time: Assessing Understanding of Core Ideas

    Science.gov (United States)

    Thomas, Margaret; McDonough, Andrea; Clarkson, Philip; Clarke, Doug

    2016-01-01

    Although an understanding of time is crucial in our society, curriculum documents have an undue emphasis on reading time and little emphasis on core underlying ideas. Given this context, a one-to-one assessment interview, based on a new framework, was developed and administered to investigate students' understanding of core ideas undergirding the…

  16. Development of core design technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; In, Kim Young; Kim, Young Il; Kim, Y G; Kim, S J; Song, H; Kim, T K; Kim, W S; Hwang, W; Lee, B O; Park, C K; Joo, H K; Yoo, J W; Kang, H Y; Park, W S

    2000-05-01

    For the development of KALIMER (150 MWe) core conceptual design, design evolution and optimization for improved economics and safety enhancement was performed in the uranium metallic fueled equilibrium core design which uses U-Zr binary fuel not in excess of 20 percent enrichment. Utilizing results of the uranium ,metallic fueled core design, the breeder equilibrium core design with breeding ratio being over 1.1 was developed. In addition, utilizing LMR's excellent neutron economy, various core concepts for minor actinide burnup, inherent safety, economics and non-proliferation were realized and its optimization studies were performed. A code system for the LMR core conceptual design has been established through the implementation of needed functions into the existing codes and development of codes. To improve the accuracy of the core design, a multi-dimensional nodal transport code SOLTRAN, a three-dimensional transient code analysis code STEP, MATRA-LMR and ASSY-P for T/H analysis are under development. Through the automation of design calculations for efficient core design, an input generator and several interface codes have been developed. (author)

  17. Core labeling of adenovirus with EGFP

    International Nuclear Information System (INIS)

    Le, Long P.; Le, Helen N.; Nelson, Amy R.; Matthews, David A.; Yamamoto, Masato; Curiel, David T.

    2006-01-01

    The study of adenovirus could greatly benefit from diverse methods of virus detection. Recently, it has been demonstrated that carboxy-terminal EGFP fusions of adenovirus core proteins Mu, V, and VII properly localize to the nucleus and display novel function in the cell. Based on these observations, we hypothesized that the core proteins may serve as targets for labeling the adenovirus core with fluorescent proteins. To this end, we constructed various chimeric expression vectors with fusion core genes (Mu-EGFP, V-EGFP, preVII-EGFP, and matVII-EGFP) while maintaining expression of the native proteins. Expression of the fusion core proteins was suboptimal using E1 expression vectors with both conventional CMV and modified (with adenovirus tripartite leader sequence) CMV5 promoters, resulting in non-labeled viral particles. However, robust expression equivalent to the native protein was observed when the fusion genes were placed in the deleted E3 region. The efficient Ad-wt-E3-V-EGFP and Ad-wt-E3-preVII-EGFP expression vectors were labeled allowing visualization of purified virus and tracking of the viral core during early infection. The vectors maintained their viral function, including viral DNA replication, viral DNA encapsidation, cytopathic effect, and thermostability. Core labeling offers a means to track the adenovirus core in vector targeting studies as well as basic adenovirus virology

  18. Development of core design technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim Young In; Kim, Young Il; Kim, Y. G.; Kim, S. J.; Song, H.; Kim, T. K.; Kim, W. S.; Hwang, W.; Lee, B. O.; Park, C. K.; Joo, H. K.; Yoo, J. W.; Kang, H. Y.; Park, W. S

    2000-05-01

    For the development of KALIMER (150 MWe) core conceptual design, design evolution and optimization for improved economics and safety enhancement was performed in the uranium metallic fueled equilibrium core design which uses U-Zr binary fuel not in excess of 20 percent enrichment. Utilizing results of the uranium ,metallic fueled core design, the breeder equilibrium core design with breeding ratio being over 1.1 was developed. In addition, utilizing LMR's excellent neutron economy, various core concepts for minor actinide burnup, inherent safety, economics and non-proliferation were realized and its optimization studies were performed. A code system for the LMR core conceptual design has been established through the implementation of needed functions into the existing codes and development of codes. To improve the accuracy of the core design, a multi-dimensional nodal transport code SOLTRAN, a three-dimensional transient code analysis code STEP, MATRA-LMR and ASSY-P for T/H analysis are under development. Through the automation of design calculations for efficient core design, an input generator and several interface codes have been developed. (author)

  19. Future Directions for Research on Core Competencies

    Science.gov (United States)

    Bradshaw, Catherine P.; Guerra, Nancy G.

    2008-01-01

    This concluding commentary highlights common themes that emerged across the chapters in this volume. We identify strengths and limitations of the core competencies framework and discuss the importance of context, culture, and development for understanding the role of the core competencies in preventing risk behavior in adolescence. We also outline…

  20. Reinventing the Platform Core Through Acquisition

    DEFF Research Database (Denmark)

    Toppenberg, Gustav; Henningsson, Stefan; Eaton, Ben

    2016-01-01

    the acquisition and integration of companies presenting innovative technologies of relevance to the platform core. Using a revelatory case study of Cisco Systems, we develop the explanatory notion of ‘coring acquisition’. In this type of acquisition value is created through the acquisition of companies...

  1. JOYO MK-II core characteristics database

    International Nuclear Information System (INIS)

    Ohkawachi, Yasushi; Maeda, Shigetaka; Sekine, Takashi; Aoyama, Takafumi

    2003-04-01

    The 'JOYO' MK-II core characteristics database was compiled and published in 1998. Comments and requests from many users led to the creation of a revised edition. The revisions include changes to the MAGI calculation code system to use the 70 group JFS-3-J3.2 constant set processed from the JENDL-3.2 library. Total control rod worth, reactor kinetic parameters and the MK-II core performance test results were included per user's requests. The core characteristics obtained from the 32 nd to 35 th operational cycles, which were conducted in the MK-III transition core, were newly added in this revised version. The MK-II core management data and core characteristics data were recorded to CD-ROM for user convenience. The Configuration Data' include the core arrangement and refueling record for each operational cycle. The 'Subassembly Library Data' include the atomic number density, neutron fluence, burn-up, integral power of 362 driver fuel subassemblies and 69 irradiation test subassemblies. The 'Output Data' contain the calculated neutron flux, gamma flux, power density, linear heat rate, coolant and fuel temperature distribution of all the fuel subassemblies at the beginning and end of each operational cycle. The 'Core Characteristics Data' include the measured excess reactivity, control rod worth calibration curve, and reactivity coefficients of temperature, power and burn-up. (author)

  2. 77 FR 30435 - In-core Thermocouples at Different Elevations and Radial Positions in Reactor Core

    Science.gov (United States)

    2012-05-23

    ... NUCLEAR REGULATORY COMMISSION 10 CFR Part 50 [Docket No. PRM-50-105; NRC-2012-0056] In-core Thermocouples at Different Elevations and Radial Positions in Reactor Core AGENCY: Nuclear Regulatory Commission... of operating licenses for nuclear power plants (``NPP'') to operate NPPs with in-core thermocouples...

  3. Core-annular flow through a horizontal pipe : Hydrodynamic counterbalancing of buoyancy force on core

    NARCIS (Netherlands)

    Ooms, G.; Vuik, C.; Poesio, P.

    2007-01-01

    A theoretical investigation has been made of core-annular flow: the flow of a high-viscosity liquid core surrounded by a low-viscosity liquid annular layer through a horizontal pipe. Special attention is paid to the question of how the buoyancy force on the core, caused by a density difference

  4. Beyond the Core: Peer Observation Brings Common Core to Vocational and Electives Classes

    Science.gov (United States)

    Thurber Rasmussen, Harriette

    2014-01-01

    This article describes how a Washington State School District increased professional learning around the Common Core State Standards. The challenge was how to establish a way for career and technical education and electives teachers to learn and apply Common Core in their classes. Weaving Common Core literacy standards into vocational and…

  5. Tank 241-AZ-102 Privatization Push Mode Core Sampling and Analysis Plan; FINAL

    International Nuclear Information System (INIS)

    TEMPLETON, A.M.

    1999-01-01

    This sampling and analysis plan (SAP) identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for samples obtained from tank 241-AZ-102. The purpose of this sampling event is to obtain information about the characteristics of the contents of 241-AZ-102. Push mode core samples will be obtained from risers 15C and 24A to provide sufficient material for the chemical analyses and tests required to satisfy these data quality objectives. The 222-S Laboratory will extrude core samples, composite the liquids and solids, perform chemical analyses, and provide subsamples to the Process Chemistry Laboratory. The Process Chemistry Laboratory will prepare test plans and perform process tests to evaluate the behavior of the 241-AZ-102 waste undergoing the retrieval and treatment scenarios defined in the applicable DQOs. Requirements for analyses of samples originating in the process tests will be documented in the corresponding test plan

  6. ROSA full-core and DNBR capabilities

    International Nuclear Information System (INIS)

    Gibcus, H.P.M.; Verhagen, F.C.M.; Wakker, P.H.

    2013-01-01

    The latest developments of the ROSA (Reloading Optimization by Simulated Annealing) code system with an emphasis on the first full-core version and the minimum DNBR (Departure from Nucleate Boiling Ratio) as a new optimization parameter are presented. Designing the core loading pattern of nuclear power plants is becoming a more and more complex task. This task becomes even more complicated if asymmetries in the core loading pattern arise, for instance due to damaged fuel assemblies. For over almost 2 decades ROSA, NRG's (Nuclear Research and consultancy Group) loading pattern optimization code system for PWRs, has proven to be a valuable tool to reactor operators in accomplishing this task. To improve the use of ROSA for designing asymmetric loading patterns, NRG has developed a full-core version of ROSA besides the original quarter-core version which requires rotational symmetry in the computational domain. The extension of ROSA with DNBR as an optimization parameter is part of ROSA's continuous development. (orig.)

  7. Magnetic nuclear core restraint and control

    International Nuclear Information System (INIS)

    Cooper, M.H.

    1979-01-01

    A lateral restraint and control system for a nuclear reactor core adaptable to provide an inherent decrease of core reactivity in response to abnormally high reactor coolant fluid temperatures. An electromagnet is associated with structure for radially compressing the core during normal reactor conditions. A portion of the structures forming a magnetic circuit are composed of ferromagnetic material having a curie temperature corresponding to a selected coolant fluid temperature. Upon a selected signal, or inherently upon a preselected rise in coolant temperature, the magnetic force is decreased a given amount sufficient to relieve the compression force so as to allow core radial expansion. The expanded core configuration provides a decreased reactivity, tending to shut down the nuclear reaction

  8. Magnetic nuclear core restraint and control

    International Nuclear Information System (INIS)

    Cooper, M.H.

    1979-01-01

    A lateral restraint and control systemm for a nuclear reactor core provides an inherent decrease of core reactivity in response to abnormally high reactor coolant fluid temperatures. An electromagnet is associated with structure for radially compressing the core during normal reactor conditions. A portion of the structures forming a magnetic circuit is composed of ferromagnetic material having a curie temperature corresponding to a selected coolant fluid temperature. Upon a selected signal, or inherently upon a preselected rise in coolant temperature, the magnetic force is decreased by an amount sufficient to relieve the compression force so as to allow core radial expansion. The expanded core configuration provides a decreased reactivity, tending to shut down the nuclear reaction

  9. Magnetic nuclear core restraint and control

    International Nuclear Information System (INIS)

    Cooper, M.H.

    1978-01-01

    Disclosed is a lateral restraint and control system for a nuclear reactor core adaptable to provide an inherent decrease of core reactivity in response to abnormally high reactor coolant fluid temperatures. An electromagnet is associated with structure for radially compressing the core during normal reactor conditions. A portion of the structures forming a magnetic circuit are composed of ferromagnetic material having a curie temperature corresponding to a selected coolant fluid temperature. Upon a selected signal, or inherently upon a preselected rise in coolant temperature, the magnetic force is decreased a given amount sufficient to relieve the compression force so as to allow core radial expansion. The expanded core configuration provides a decreased reactivity, tending to shut down the nuclear reaction

  10. Core rotational dynamics and geological events

    Science.gov (United States)

    Greff-Lefftz; Legros

    1999-11-26

    A study of Earth's fluid core oscillations induced by lunar-solar tidal forces, together with tidal secular deceleration of Earth's axial rotation, shows that the rotational eigenfrequency of the fluid core and some solar tidal waves were in resonance around 3.0 x 10(9), 1.8 x 10(9), and 3 x 10(8) years ago. The associated viscomagnetic frictional power at the core boundaries may be converted into heat and would destabilize the D" thermal layer, leading to the generation of deep-mantle plumes, and would also increase the temperature at the fluid core boundaries, perturbing the core dynamo process. Such phenomena could account for large-scale episodes of continental crust formation, the generation of flood basalts, and abrupt changes in geomagnetic reversal frequency.

  11. Heysham II/Torness AGR core integrity

    International Nuclear Information System (INIS)

    Birch, A.L.; Hampson, J.D.

    1985-01-01

    The design and construction process for the Heysham II/Torness AGR core structures is presented. The design intent utilizing all past experience in designing and building AGR core structures is described. The major aspects of the design criteria and the design conditions are outlined to demonstrate how the integrity of the Heysham II/Torness core is assured. Since no recognized codes of practice for graphite core design exist, the National Nuclear Corporation (NNC) have conceived design criteria utilizing reserve factors based on their design experience. Target reserve factors are defined for particular loading conditions including the ultimate 'safe-shutdown earthquake'. The substantial programme of computer analysis and RandD work to substantiate the design, including seismic qualification, is described. In keeping with their responsibility for the detailed core structure design and the fuel path geometry (guide tube system), NNC attach great importance to design/manufacture/construction liaison, which is demonstrated in the quality assurance section. (author)

  12. Core clamping device for a nuclear reactor

    International Nuclear Information System (INIS)

    Guenther, R.W.

    1974-01-01

    The core clamping device for a fast neutron reactor includes clamps to support the fuel zone against the pressure vessel. The clamps are arranged around the circumference of the core. They consist of torsion bars arranged parallel at some distance around the core with lever arms attached to the ends whose force is directed in the opposite direction, pressing against the wall of the pressure vessel. The lever arms and pressure plates also actuated by the ends of the torsion bars transfer the stress, the pressure plates acting upon the fuel elements or fuel assemblies. Coupling between the ends of the torsion bars and the pressure plates is achieved by end carrier plates directly attached to the torsion bars and radially movable. This clamping device follows the thermal expansions of the core, allows specific elements to be disengaged in sections and saves space between the core and the neutron reflectors. (DG) [de

  13. Core design and fuel management studies

    International Nuclear Information System (INIS)

    Min, Byung Joo; Chan, P.

    1997-06-01

    The design target for the CANDU 9 requires a 20% increase in electrical power output from an existing 480-channel CANDU core. Assuming a net electrical output of 861 MW(e) for a natural uranium fuelled Bruce-B/Darlington reactor in a warm water site, the net electrical output of the reference CANDU 9 reactor would be 1033 MW(e). This report documents the result of the physics studies for the design of the CANDU 9 480/SEU core. The results of the core design and fuel management studies of the CANDU 9 480/SEU reactor indicated that up to 1033 MW(e) output can be achieved in a 480-channel CANDU core by using SEU core can easily be maintained indefinitely using an automated refuelling program. Fuel performance evaluation based on the data of the 500 FPDs refuelling simulation concluded that SEU fuel failure is not expected. (author). 2 tabs., 38 figs., 5 refs

  14. Support tube of in-core instruments

    International Nuclear Information System (INIS)

    Suzumura, Takeshi; Saito, Shozo; Yasuda, Tetsuo; Shirosaki, Kiyotaka.

    1975-01-01

    Object: To permit satisfactory output measurement by preventing the bending of a in-core instrument tube within a reactor due to vibrations by means of a spring and thereby preventing mechanical damage of an adjacent fuel channel box. Structure: At a corner of a channel box of a fuel assembly, a in-core instrument tube is arranged along a channel box and has its surface provided with a plurality of removable leaf springs arranged in the direction of axis of the in-core instrument tube and each having an arcular tip. Thus, when the in-core instrument tube is inserted into the reactor, the arcular tip portions of the leaf springs are brought into plane contact with the corner of the channel box so that the in-core instrument tube is elastically supported on the channel box. Thus, there is no possibility of causing damage to the adjacent fuel channel box. (Kamimura, M.)

  15. Formal education of patients about to undergo laparoscopic cholecystectomy.

    Science.gov (United States)

    Gurusamy, Kurinchi Selvan; Vaughan, Jessica; Davidson, Brian R

    2014-02-28

    Generally, before being operated on, patients will be given informal information by the healthcare providers involved in the care of the patients (doctors, nurses, ward clerks, or healthcare assistants). This information can also be provided formally in different formats including written information, formal lectures, or audio-visual recorded information. To compare the benefits and harms of formal preoperative patient education for patients undergoing laparoscopic cholecystectomy. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (Issue 2, 2013), MEDLINE, EMBASE, and Science Citation Index Expanded to March 2013. We included only randomised clinical trials irrespective of language and publication status. Two review authors independently extracted the data. We planned to calculate the risk ratio with 95% confidence intervals (CI) for dichotomous outcomes, and mean difference (MD) or standardised mean difference (SMD) with 95% CI for continuous outcomes based on intention-to-treat analyses when data were available. A total of 431 participants undergoing elective laparoscopic cholecystectomy were randomised to formal patient education (215 participants) versus standard care (216 participants) in four trials. The patient education included verbal education, multimedia DVD programme, computer-based multimedia programme, and Power Point presentation in the four trials. All the trials were of high risk of bias. One trial including 212 patients reported mortality. There was no mortality in either group in this trial. None of the trials reported surgery-related morbidity, quality of life, proportion of patients discharged as day-procedure laparoscopic cholecystectomy, the length of hospital stay, return to work, or the number of unplanned visits to the doctor. There were insufficient details to calculate the mean difference and 95% CI for the difference in pain scores at 9 to 24 hours (1 trial; 93 patients); and we did not identify clear evidence of

  16. [Pharmacokinetics of flomoxef in children undergoing chronic hemodialysis].

    Science.gov (United States)

    Sasagawa, F; Nakano, T; Mito, Y; Sekine, O

    1993-07-01

    The pharmacokinetics of flomoxef (FMOX), an oxacephem antibiotic, were investigated in pediatric patients undergoing chronic hemodialysis. The results are summarized as follows. 1. FMOX was given intravenously in a single dose of 10 mg/kg to 5 pediatric patients (ranging from 7 to 15 years of age) undergoing chronic hemodialysis. It was also given in a dose of 5 mg/kg to 2 of these patients. Its concentrations in serum and urine were determined using bioassay. Pharmacokinetic analyses were performed using a two compartment open model. 2. The serum concentrations of FMOX, administered in doses of 10 mg/kg or 5 mg/kg on non-hemodialysis days, were 33.3 +/- 4.09 micrograms/ml (mean +/- standard deviation) and 17.6 micrograms/ml (mean) at 30 minutes after injection, 29.6 +/- 3.51 micrograms/ml and 15.9 micrograms/ml at 1 hour, 27.2 +/- 2.14 micrograms/ml and 15.1 micrograms/ml at 2 hours, 23.5 +/- 1.90 micrograms/ml and 13.0 micrograms/ml at 4 hours, 20.8 +/- 2.44 micrograms/ml and 12.2 micrograms/ml at 6 hours, 18.9 +/- 1.86 micrograms/ml and 11.0 micrograms/ml at 8 hours, and 9.64 +/- 1.43 micrograms/ml and 6.16 micrograms/ml at 24 hours, respectively. 3. The urinary concentrations of FMOX, administered in a dose of 10 mg/kg, were 42.4-123 micrograms/ml between 0-6 hours after injection, 14.1-52.5 micrograms/ml between 6-24 hours, and 2.86-23.7 micrograms/ml between 24-48 hours. The urinary excretion rate in the first 48 hours after injection ranged from 9.1 to 10.5%.(ABSTRACT TRUNCATED AT 250 WORDS)

  17. Levosimendan in Patients with Left Ventricular Dysfunction Undergoing Cardiac Surgery.

    Science.gov (United States)

    Mehta, Rajendra H; Leimberger, Jeffrey D; van Diepen, Sean; Meza, James; Wang, Alice; Jankowich, Rachael; Harrison, Robert W; Hay, Douglas; Fremes, Stephen; Duncan, Andra; Soltesz, Edward G; Luber, John; Park, Soon; Argenziano, Michael; Murphy, Edward; Marcel, Randy; Kalavrouziotis, Dimitri; Nagpal, Dave; Bozinovski, John; Toller, Wolfgang; Heringlake, Matthias; Goodman, Shaun G; Levy, Jerrold H; Harrington, Robert A; Anstrom, Kevin J; Alexander, John H

    2017-05-25

    Levosimendan is an inotropic agent that has been shown in small studies to prevent or treat the low cardiac output syndrome after cardiac surgery. In a multicenter, randomized, placebo-controlled, phase 3 trial, we evaluated the efficacy and safety of levosimendan in patients with a left ventricular ejection fraction of 35% or less who were undergoing cardiac surgery with the use of cardiopulmonary bypass. Patients were randomly assigned to receive either intravenous levosimendan (at a dose of 0.2 μg per kilogram of body weight per minute for 1 hour, followed by a dose of 0.1 μg per kilogram per minute for 23 hours) or placebo, with the infusion started before surgery. The two primary end points were a four-component composite of death through day 30, renal-replacement therapy through day 30, perioperative myocardial infarction through day 5, or use of a mechanical cardiac assist device through day 5; and a two-component composite of death through day 30 or use of a mechanical cardiac assist device through day 5. A total of 882 patients underwent randomization, 849 of whom received levosimendan or placebo and were included in the modified intention-to-treat population. The four-component primary end point occurred in 105 of 428 patients (24.5%) assigned to receive levosimendan and in 103 of 421 (24.5%) assigned to receive placebo (adjusted odds ratio, 1.00; 99% confidence interval [CI], 0.66 to 1.54; P=0.98). The two-component primary end point occurred in 56 patients (13.1%) assigned to receive levosimendan and in 48 (11.4%) assigned to receive placebo (adjusted odds ratio, 1.18; 96% CI, 0.76 to 1.82; P=0.45). The rate of adverse events did not differ significantly between the two groups. Prophylactic levosimendan did not result in a rate of the short-term composite end point of death, renal-replacement therapy, perioperative myocardial infarction, or use of a mechanical cardiac assist device that was lower than the rate with placebo among patients with a

  18. Retrospective review of pelvic malignancies undergoing total pelvic exenteration

    Directory of Open Access Journals (Sweden)

    Kuhrt Maureen P

    2012-06-01

    Patients undergoing TPE for colorectal tumors have improved survival when compared with patients undergoing exenteration for pelvic malignancies of other origins. Within the colorectal group, the extent of resection demonstrated a significant survival benefit of an R0 resection compared with R1 and R2 resections. Despite TPE carrying a high morbidity rate, mortality rates have improved and careful patient selection can optimize outcomes.

  19. PLASMA CYTOKINES LEVELS IN PATIENTS UNDERGOING LONG-TERM HAEMODIALYSIS

    Directory of Open Access Journals (Sweden)

    D. S. Polyakov

    2011-01-01

    Full Text Available Аbstract.  Patients  with  end-stage  renal  disease  need  their  kidney  functions  to  be  replaced.  Chronic haemodialysis represents a most common method of such substitution treatment. This procedure results in successful survival of such patients for years. Chronic haemodialysis is accompanied by a complication which is known as β2-microglobulin amyloidosis. In this case, amyloid substance consisting of β2-microglobulin (β2-MG accumulates in bones, ligaments and joints. Biological causes of β2-MG amyloidosis are still not established. To elucidate the role of inflammation in the pathogenesis of β2-MG amyloidosis, the levels of  IL-2,  IL-4,  IL-6,  IL-8,  IL-10,  GM-CSF,  IFNγ, TNFα were quantified in plasma of patients undergoing  long-term haemodialysis. Mean amounts of all the mentioned cytokines in haemodialysis patients proved to be significantly higher than in control group consisting of healthy subjects. When comparing a group receiving standard  dialysis  procedure  versus  a  subgroup  receiving  haemodiafiltration,  a  single  reliable  difference  was revealed for GM-CSF levels (p < 0.04, without any differences shown for other cytokines. With increasing terms of chronic haemodialysis, the levels of IL-2, IL-4, IL-6, IL-8, GM-CSF, IFNγ, TNFα were increased, or, at least, they did not decrease. After three years of dialysis, IL-10 concentrations were statistically indistinguishable from normal levels. In patients undergoing haemodiafiltration, plasma levels of IL-2, IL-4, IL-8, GM-CSF, IFNγ, TNFα did not drop with increasing terms of dialysis. The levels of IL-6 and IL-10 decreased after three years of dialysis, to near-normal levels.In general, these results suggest that IL-10 and IL-6 may be regarded as candidates for further studies as potential markers of β2-microglobulin amyloidosis. (Med. Immunol., 2011, vol. 13, N 2-3, pp 211-218

  20. Preoperative autologous plateletpheresis in patients undergoing open heart surgery.

    Directory of Open Access Journals (Sweden)

    Tomar Akhlesh

    2003-01-01

    Full Text Available Blood conservation is an important aspect of care provided to the patients undergoing cardiac operations with cardiopulmonary bypass (CPB. It is even more important in patients with anticipated prolonged CPB, redo cardiac surgery, patients having negative blood group and in patients undergoing emergency cardiac surgery. In prolonged CPB the blood is subjected to more destruction of important coagulation factors, in redo surgery the separation of adhesions leads to increased bleeding and difficulty in achieving the haemostasis and in patients with negative blood group and emergency operations, the availability of sufficient blood can be a problem. Harvesting the autologous platelet rich plasma (PRP can be a useful method of blood conservation in these patients. The above four categories of patients were prospectively studied, using either autologous whole blood donation or autologous platelet rich plasma (PRP harvest in the immediate pre-bypass period. Forty two patients were included in the study and randomly divided into two equal groups of 21 each, control group (Group I in which one unit of whole blood was withdrawn, and PRP group (Group II where autologous plateletpheresis was utilised. After reversal of heparin, autologous whole blood was transfused in the control group and autologous PRP was transfused in the PRP group. The chest tube drainage and the requirement of homologous blood and blood products were recorded. Average PRP harvest was 643.33 +/- 133.51 mL in PRP group and the mean whole blood donation was 333.75 +/- 79.58 mL in the control group. Demographic, preoperative and intra operative data showed no statistically significant differences between the two groups. The PRP group patients drained 26.44% less (p<0.001 and required 38.5% less homologous blood and blood products (p<0.05, in the postoperative period. Haemoglobin levels on day zero (day of operation and day three were statistically not different between the two groups. We